- Aug 26, 2021
-
-
Jakub Kicinski authored
[ Upstream commit 3c603136 ] We can't take the tx lock from the napi poll routine, because netpoll can poll napi at any moment, including with the tx lock already held. The tx lock is protecting against two paths - the disable path, and (as Michael points out) the NETDEV_TX_BUSY case which may occur if NAPI completions race with start_xmit and both decide to re-enable the queue. For the disable/ifdown path use synchronize_net() to make sure closing the device does not race we restarting the queues. Annotate accesses to dev_state against data races. For the NAPI cleanup vs start_xmit path - appropriate barriers are already in place in the main spot where Tx queue is stopped but we need to do the same careful dance in the TX_BUSY case. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ilya Leoshkevich authored
[ Upstream commit 45c709f8 ] "access skb fields ok" verifier test fails on s390 with the "verifier bug. zext_dst is set, but no reg is defined" message. The first insns of the test prog are ... 0: 61 01 00 00 00 00 00 00 ldxw %r0,[%r1+0] 8: 35 00 00 01 00 00 00 00 jge %r0,0,1 10: 61 01 00 08 00 00 00 00 ldxw %r0,[%r1+8] ... and the 3rd one is dead (this does not look intentional to me, but this is a separate topic). sanitize_dead_code() converts dead insns into "ja -1", but keeps zext_dst. When opt_subreg_zext_lo32_rnd_hi32() tries to parse such an insn, it sees this discrepancy and bails. This problem can be seen only with JITs whose bpf_jit_needs_zext() returns true. Fix by clearning dead insns' zext_dst. The commits that contributed to this problem are: 1. 5aa5bd14 ("bpf: add initial suite for selftests"), which introduced the test with the dead code. 2. 5327ed3d ("bpf: verifier: mark verified-insn with sub-register zext flag"), which introduced the zext_dst flag. 3. 83a28819 ("bpf: Account for BPF_FETCH in insn_has_def32()"), which introduced the sanity check. 4. 9183671a ("bpf: Fix leakage under speculation on mispredicted branches"), which bisect points to. It's best to fix this on stable branches that contain the second one, since that's the point where the inconsistency was introduced. Fixes: 5327ed3d ("bpf: verifier: mark verified-insn with sub-register zext flag") Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210812151811.184086-2-iii@linux.ibm.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
jason-jh.lin authored
[ Upstream commit 71ac6f39 ] To avoid the output width and height is incorrect, AAL_OUTPUT_SIZE configuration should be set. Fixes: 0664d139 ("drm/mediatek: Add AAL engine basic function") Signed-off-by:
jason-jh.lin <jason-jh.lin@mediatek.com> Signed-off-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yongqiang Niu authored
[ Upstream commit 71dcadba ] The orginal setting is not correct, fix it to follow hardware data sheet. If keep this error setting, mt8173/mt8183 display ok but mt8192 display abnormal. Fixes: 0664d139 ("drm/mediatek: Add AAL engine basic function") Signed-off-by:
Yongqiang Niu <yongqiang.niu@mediatek.com> Signed-off-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yongqiang Niu authored
[ Upstream commit 51c0e618 ] MMSYS is the driver which controls the routing of these DDP components, so the definition of the mtk_ddp_comp_id enum should be placed in mtk-mmsys.h Signed-off-by:
Yongqiang Niu <yongqiang.niu@mediatek.com> Signed-off-by:
Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org> Link: https://lore.kernel.org/r/20201006193320.405529-2-enric.balletbo@collabora.com Signed-off-by:
Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eli Cohen authored
[ Upstream commit 08dbd566 ] The current code treats an empty iotlb provdied in set_map() as a special case and destroy the memory region object. This must not be done since the virtqueue objects reference this MR. Doing so will cause the driver unload to emit errors and log timeouts caused by the firmware complaining on busy resources. This patch treats an empty iotlb as any other change of mapping. In this case, mlx5_vdpa_create_mr() will fail and the entire set_map() call to fail. This issue has not been encountered before but was seen to occur in a non-official version of qemu. Since qemu is a userspace program, the driver must protect against such case. Fixes: 94abbccd ("vdpa/mlx5: Add shared memory registration code") Signed-off-by:
Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210811053713.66658-1-elic@nvidia.com Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Xie Yongji authored
[ Upstream commit f7ad318e ] This fixes the incorrect calculation for integer overflow when the last address of iova range is 0xffffffff. Fixes: ec33d031 ("vhost: detect 32 bit integer wrap around") Reported-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Xie Yongji <xieyongji@bytedance.com> Acked-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210728130756.97-2-xieyongji@bytedance.com Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tony Lindgren authored
[ Upstream commit 06a089ef ] We have changed the return type for sysc_check_active_timer() from -EBUSY to -ENXIO, but the gpt12 system timer fix still checks for -EBUSY. We are also not returning on other errors like we did earlier as noted by Pavel Machek <pavel@denx.de>. Commit 3ff340e2 ("bus: ti-sysc: Fix gpt12 system timer issue with reserved status") should have been updated for commit 65fb7367 ("bus: ti-sysc: suppress err msg for timers used as clockevent/source"). Let's fix the issue by checking for -ENXIO and returning on any other errors as suggested by Pavel Machek <pavel@denx.de>. Fixes: 3ff340e2 ("bus: ti-sysc: Fix gpt12 system timer issue with reserved status") Depends-on: 65fb7367 ("bus: ti-sysc: suppress err msg for timers used as clockevent/source") Reported-by:
Pavel Machek <pavel@denx.de> Reviewed-by:
Pavel Machek (CIP) <pavel@denx.de> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Xie Yongji authored
[ Upstream commit 0e398290 ] The "msg->iova + msg->size" addition can have an integer overflow if the iotlb message is from a malicious user space application. So let's fix it. Fixes: 1b48dc03 ("vhost: vdpa: report iova range") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Xie Yongji <xieyongji@bytedance.com> Acked-by:
Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210728130756.97-1-xieyongji@bytedance.com Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Parav Pandit authored
[ Upstream commit 0e566c8f ] VQs may be accessed to mark the device broken while they are created/destroyed. Hence protect the access to the vqs list. Fixes: e2dcdfe9 ("virtio: virtio_break_device() to mark all virtqueues broken.") Signed-off-by:
Parav Pandit <parav@nvidia.com> Link: https://lore.kernel.org/r/20210721142648.1525924-4-parav@nvidia.com Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Randy Dunlap authored
[ Upstream commit 86aab09a ] GCC complains about empty macros in an 'if' statement, so convert them to 'do {} while (0)' macros. Fixes these build warnings: net/dccp/output.c: In function 'dccp_xmit_packet': ../net/dccp/output.c:283:71: warning: suggest braces around empty body in an 'if' statement [-Wempty-body] 283 | dccp_pr_debug("transmit_skb() returned err=%d\n", err); net/dccp/ackvec.c: In function 'dccp_ackvec_update_old': ../net/dccp/ackvec.c:163:80: warning: suggest braces around empty body in an 'else' statement [-Wempty-body] 163 | (unsigned long long)seqno, state); Fixes: dc841e30 ("dccp: Extend CCID packet dequeueing interface") Fixes: 38024086 ("dccp ccid-2: Update code for the Ack Vector input/registration routine") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: dccp@vger.kernel.org Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Gerrit Renker <gerrit@erg.abdn.ac.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marek Behún authored
[ Upstream commit 484f2b7c ] The 1.2 GHz variant of the Armada 3720 SOC is unstable with DVFS: when the SOC boots, the WTMI firmware sets clocks and AVS values that work correctly with 1.2 GHz CPU frequency, but random crashes occur once cpufreq driver starts scaling. We do not know currently what is the reason: - it may be that the voltage value for L0 for 1.2 GHz variant provided by the vendor in the OTP is simply incorrect when scaling is used, - it may be that some delay is needed somewhere, - it may be something else. The most sane solution now seems to be to simply forbid the cpufreq driver on 1.2 GHz variant. Signed-off-by:
Marek Behún <kabel@kernel.org> Fixes: 92ce45fb ("cpufreq: Add DVFS support for Armada 37xx") Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Frank Wunderlich authored
[ Upstream commit 5aa95d88 ] If probe_device is failing, iommu_group is not initialized because iommu_group_add_device is not reached, so freeing it will result in NULL pointer access. iommu_bus_init ->bus_iommu_probe ->probe_iommu_group in for each:/* return -22 in fail case */ ->iommu_probe_device ->__iommu_probe_device /* return -22 here.*/ -> ops->probe_device /* return -22 here.*/ -> iommu_group_get_for_dev -> ops->device_group -> iommu_group_add_device //good case ->remove_iommu_group //in fail case, it will remove group ->iommu_release_device ->iommu_group_remove_device // here we don't have group In my case ops->probe_device (mtk_iommu_probe_device from mtk_iommu_v1.c) is due to failing fwspec->ops mismatch. Fixes: d72e31c9 ("iommu: IOMMU Groups") Signed-off-by:
Frank Wunderlich <frank-w@public-files.de> Link: https://lore.kernel.org/r/20210731074737.4573-1-linux@fw-web.de Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Petr Vorel authored
[ Upstream commit 9d1fc2e4 ] Bullhead firmware obviously doesn't support PSCI as it fails to boot with this definition. Fixes: 329e16d5 ("arm64: dts: qcom: msm8992: Add PSCI support.") Signed-off-by:
Petr Vorel <petr.vorel@gmail.com> Link: https://lore.kernel.org/r/20210713185734.380-2-petr.vorel@gmail.com Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Srinivas Kandagatla authored
[ Upstream commit 9a253bb4 ] WSA881x powerdown pin is connected to GPIO1, GPIO2 not GPIO2 and GPIO3, so correct this. This was working so far due to a shift bug in gpio driver, however once that is fixed this will stop working, so fix this! For some reason we forgot to add this dts change in last merge cycle so currently audio is broken in 5.13 as the gpio driver fix already landed in 5.13. Reported-by:
Shawn Guo <shawnguo@kernel.org> Fixes: 45021d35 ("arm64: dts: qcom: c630: Enable audio support") Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Tested-by:
Shawn Guo <shawnguo@kernel.org> Link: https://lore.kernel.org/r/20210706083523.10601-1-srinivas.kandagatla@linaro.org Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ole Bjørn Midtbø authored
[ Upstream commit cca342d9 ] A different wait queue was used when removing ctrl_wait than when adding it. This effectively made the remove operation without locking compared to other operations on the wait queue ctrl_wait was part of. This caused issues like below where dead000000000100 is LIST_POISON1 and dead000000000200 is LIST_POISON2. list_add corruption. next->prev should be prev (ffffffc1b0a33a08), \ but was dead000000000200. (next=ffffffc03ac77de0). ------------[ cut here ]------------ CPU: 3 PID: 2138 Comm: bluetoothd Tainted: G O 4.4.238+ #9 ... ---[ end trace 0adc2158f0646eac ]--- Call trace: [<ffffffc000443f78>] __list_add+0x38/0xb0 [<ffffffc0000f0d04>] add_wait_queue+0x4c/0x68 [<ffffffc00020eecc>] __pollwait+0xec/0x100 [<ffffffc000d1556c>] bt_sock_poll+0x74/0x200 [<ffffffc000bdb8a8>] sock_poll+0x110/0x128 [<ffffffc000210378>] do_sys_poll+0x220/0x480 [<ffffffc0002106f0>] SyS_poll+0x80/0x138 [<ffffffc00008510c>] __sys_trace_return+0x0/0x4 Unable to handle kernel paging request at virtual address dead000000000100 ... CPU: 4 PID: 5387 Comm: kworker/u15:3 Tainted: G W O 4.4.238+ #9 ... Call trace: [<ffffffc0000f079c>] __wake_up_common+0x7c/0xa8 [<ffffffc0000f0818>] __wake_up+0x50/0x70 [<ffffffc000be11b0>] sock_def_wakeup+0x58/0x60 [<ffffffc000de5e10>] l2cap_sock_teardown_cb+0x200/0x224 [<ffffffc000d3f2ac>] l2cap_chan_del+0xa4/0x298 [<ffffffc000d45ea0>] l2cap_conn_del+0x118/0x198 [<ffffffc000d45f8c>] l2cap_disconn_cfm+0x6c/0x78 [<ffffffc000d29934>] hci_event_packet+0x564/0x2e30 [<ffffffc000d19b0c>] hci_rx_work+0x10c/0x360 [<ffffffc0000c2218>] process_one_work+0x268/0x460 [<ffffffc0000c2678>] worker_thread+0x268/0x480 [<ffffffc0000c94e0>] kthread+0x118/0x128 [<ffffffc000085070>] ret_from_fork+0x10/0x20 ---[ end trace 0adc2158f0646ead ]--- Signed-off-by:
Ole Bjørn Midtbø <omidtbo@cisco.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Qingqing Zhuo authored
[ Upstream commit c4152b29 ] [Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enable, causing DMUB to access an unresponsive PHY and thus a hard hang on the system. [How] Disable 48mhz refclk off on native DP. Reviewed-by:
Hersen Wu <hersenxs.wu@amd.com> Acked-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Bing Guo authored
[ Upstream commit 06050a0f ] Why: In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X by the number of pipes ODM Combined. How: Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the number of pipes ODM Combined. Reviewed-by:
Martin Leung <martin.leung@amd.com> Acked-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by:
Bing Guo <bing.guo@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ivan T. Ivanov authored
[ Upstream commit 6b67d4d6 ] Currently phy_device state could be left in inconsistent state shown by following alert message[1]. This is because phy_read_status could be called concurrently from lan78xx_delayedwork, phy_state_machine and __ethtool_get_link. Fix this by making sure that phy_device state is updated atomically. [1] lan78xx 1-1.1.1:1.0 eth0: No phy led trigger registered for speed(-1) Signed-off-by:
Ivan T. Ivanov <iivanov@suse.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Petko Manolov authored
[ Upstream commit 8a160e2e ] Certain call sites of get_geristers() did not do proper error handling. This could be a problem as get_geristers() typically return the data via pointer to a buffer. If an error occurred the code is carelessly manipulating the wrong data. Signed-off-by:
Petko Manolov <petkan@nucleusys.com> Reviewed-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sudeep Holla authored
[ Upstream commit 47091f47 ] Once the new schema interrupt-controller/arm,vic.yaml is added, we get the below warnings: arch/arm/boot/dts/ste-nomadik-nhk15.dt.yaml: intc@10140000: $nodename:0: 'intc@10140000' does not match '^interrupt-controller(@[0-9a-f,]+)*$' Fix the node names for the interrupt controller to conform to the standard node name interrupt-controller@.. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20210617210825.3064367-2-sudeep.holla@arm.com Link: https://lore.kernel.org/r/20210626000103.830184-1-linus.walleij@linaro.org' Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Prabhakar Kushwaha authored
[ Upstream commit 1159e25c ] A crash has been observed if rmmod is done while automatic debug collection in progress. It is due to a race condition between both of them. To fix stop the sp_task during unload to avoid running qede_sp_task even if they are schedule during removal process. Signed-off-by:
Alok Prasad <palok@marvell.com> Signed-off-by:
Shai Malin <smalin@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yifan Zhang authored
[ Upstream commit 1c0539a6 ] If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue. Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
lijinlin authored
[ Upstream commit f0f82e24 ] After adding physical volumes to a volume group through vgextend, the kernel will rescan the partitions. This in turn will cause the device capacity to be queried. If the device status is set to offline through sysfs at this time, READ CAPACITY command will return a result which the host byte is DID_NO_CONNECT, and the capacity of the device will be set to zero in read_capacity_error(). After setting device status back to running, the capacity of the device will remain stuck at zero. Fix this issue by rescanning device when the device state changes to SDEV_RUNNING. Link: https://lore.kernel.org/r/20210727034455.1494960-1-lijinlin3@huawei.com Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
lijinlin <lijinlin3@huawei.com> Signed-off-by:
Wu Bo <wubo40@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sreekanth Reddy authored
[ Upstream commit 70edd2e6 ] Avoid printing a 'target allocation failed' error if the driver target_alloc() callback function returns -ENXIO. This return value indicates that the corresponding H:C:T:L entry is empty. Removing this error reduces the scan time if the user issues SCAN_WILD_CARD scan operation through sysfs parameter on a host with a lot of empty H:C:T:L entries. Avoiding the printk on -ENXIO matches the behavior of the other callback functions during scanning. Link: https://lore.kernel.org/r/20210726115402.1936-1-sreekanth.reddy@broadcom.com Signed-off-by:
Sreekanth Reddy <sreekanth.reddy@broadcom.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ye Bin authored
[ Upstream commit bc546c0c ] The following BUG_ON() was observed during RDAC scan: [595952.944297] kernel BUG at drivers/scsi/device_handler/scsi_dh_rdac.c:427! [595952.951143] Internal error: Oops - BUG: 0 [#1] SMP ...... [595953.251065] Call trace: [595953.259054] check_ownership+0xb0/0x118 [595953.269794] rdac_bus_attach+0x1f0/0x4b0 [595953.273787] scsi_dh_handler_attach+0x3c/0xe8 [595953.278211] scsi_dh_add_device+0xc4/0xe8 [595953.282291] scsi_sysfs_add_sdev+0x8c/0x2a8 [595953.286544] scsi_probe_and_add_lun+0x9fc/0xd00 [595953.291142] __scsi_scan_target+0x598/0x630 [595953.295395] scsi_scan_target+0x120/0x130 [595953.299481] fc_user_scan+0x1a0/0x1c0 [scsi_transport_fc] [595953.304944] store_scan+0xb0/0x108 [595953.308420] dev_attr_store+0x44/0x60 [595953.312160] sysfs_kf_write+0x58/0x80 [595953.315893] kernfs_fop_write+0xe8/0x1f0 [595953.319888] __vfs_write+0x60/0x190 [595953.323448] vfs_write+0xac/0x1c0 [595953.326836] ksys_write+0x74/0xf0 [595953.330221] __arm64_sys_write+0x24/0x30 Code is in check_ownership: list_for_each_entry_rcu(tmp, &h->ctlr->dh_list, node) { /* h->sdev should always be valid */ BUG_ON(!tmp->sdev); tmp->sdev->access_state = access_state; } rdac_bus_attach initialize_controller list_add_rcu(&h->node, &h->ctlr->dh_list); h->sdev = sdev; rdac_bus_detach list_del_rcu(&h->node); h->sdev = NULL; Fix the race between rdac_bus_attach() and rdac_bus_detach() where h->sdev is NULL when processing the RDAC attach. Link: https://lore.kernel.org/r/20210113063103.2698953-1-yebin10@huawei.com Reviewed-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
Ye Bin <yebin10@huawei.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Harshvardhan Jha authored
[ Upstream commit 77541f78 ] The list_for_each_entry() iterator, "adapter" in this code, can never be NULL. If we exit the loop without finding the correct adapter then "adapter" points invalid memory that is an offset from the list head. This will eventually lead to memory corruption and presumably a kernel crash. Link: https://lore.kernel.org/r/20210708074642.23599-1-harshvardhan.jha@oracle.com Acked-by:
Sumit Saxena <sumit.saxena@broadcom.com> Signed-off-by:
Harshvardhan Jha <harshvardhan.jha@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Igor Pylypiv authored
[ Upstream commit d712d3fb ] The TMF timeout timer may trigger at the same time when the response from a controller is being handled. When this happens the SAS task may get freed before the response processing is finished. Fix this by calling complete() only when SAS_TASK_STATE_DONE is not set. A similar race condition was fixed in commit b90cd6f2 ("scsi: libsas: fix a race condition when smp task timeout") Link: https://lore.kernel.org/r/20210707185945.35559-1-ipylypiv@google.com Reviewed-by:
Vishakha Channapattan <vishakhavc@google.com> Acked-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
Igor Pylypiv <ipylypiv@google.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Peter Ujfalusi authored
[ Upstream commit eda97cb0 ] If the router_xlate can not find the controller in the available DMA devices then it should return with -EPORBE_DEFER in a same way as the of_dma_request_slave_channel() does. The issue can be reproduced if the event router is registered before the DMA controller itself and a driver would request for a channel before the controller is registered. In of_dma_request_slave_channel(): 1. of_dma_find_controller() would find the dma_router 2. ofdma->of_dma_xlate() would fail and returned NULL 3. -ENODEV is returned as error code with this patch we would return in this case the correct -EPROBE_DEFER and the client can try to request the channel later. Signed-off-by:
Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20210717190021.21897-1-peter.ujfalusi@gmail.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dave Gerlach authored
[ Upstream commit 20a6b3fd ] Based on the latest timing specifications for the TPS65218 from the data sheet, http://www.ti.com/lit/ds/symlink/tps65218.pdf, document SLDS206 from November 2014, we must change the i2c bus speed to better fit within the minimum high SCL time required for proper i2c transfer. When running at 400khz, measurements show that SCL spends 0.8125 uS/1.666 uS high/low which violates the requirement for minimum high period of SCL provided in datasheet Table 7.6 which is 1 uS. Switching to 100khz gives us 5 uS/5 uS high/low which both fall above the minimum given values for 100 khz, 4.0 uS/4.7 uS high/low. Without this patch occasionally a voltage set operation from the kernel will appear to have worked but the actual voltage reflected on the PMIC will not have updated, causing problems especially with cpufreq that may update to a higher OPP without actually raising the voltage on DCDC2, leading to a hang. Signed-off-by:
Dave Gerlach <d-gerlach@ti.com> Signed-off-by:
Kevin Hilman <khilman@baylibre.com> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Harshvardhan Jha authored
[ Upstream commit 480e93e1 ] The list_for_each_entry() iterator, "pos" in this code, can never be NULL so the warning will never be printed. Signed-off-by:
Harshvardhan Jha <harshvardhan.jha@oracle.com> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Uwe Kleine-König authored
[ Upstream commit 1d5ccab9 ] With the spi device table udev can autoload the spi-mux module in the presence of an spi-mux device. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210721095321.2165453-1-u.kleine-koenig@pengutronix.de Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yu Kuai authored
[ Upstream commit 1da569fa ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by moving the error_pm label above the pm_runtime_put() in the error path. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20210706124521.1371901-1-yukuai3@huawei.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Adrian Larumbe authored
[ Upstream commit 7dd2dd4f ] When user calls dmaengine_terminate_sync, the driver will clean up any remaining descriptors for all the pending or active transfers that had previously been submitted. However, this might happen whilst the tasklet is invoking the DMA callback for the last finished transfer, so by the time it returns and takes over the channel's spinlock, the list of completed descriptors it was traversing is no longer valid. This leads to a read-after-free situation. Fix it by signalling whether a user-triggered termination has happened by means of a boolean variable. Signed-off-by:
Adrian Larumbe <adrian.martinezlarumbe@imgtec.com> Link: https://lore.kernel.org/r/20210706234338.7696-3-adrian.martinezlarumbe@imgtec.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Alan Stern authored
[ Upstream commit b0863f19 ] When the user submits a control URB via usbfs, the user supplies the bRequestType value and the kernel uses it to compute the pipe value. However, do_proc_control() performs this computation incorrectly in the case where the bRequestType direction bit is set to USB_DIR_IN and the URB's transfer length is 0: The pipe's direction is also set to IN but it should be OUT, which is the direction the actual transfer will use regardless of bRequestType. Commit 5cc59c41 ("USB: core: WARN if pipe direction != setup packet direction") added a check to compare the direction bit in the pipe value to a control URB's actual direction and to WARN if they are different. This can be triggered by the incorrect computation mentioned above, as found by syzbot. This patch fixes the computation, thus avoiding the WARNing. Reported-and-tested-by:
<syzbot+72af3105289dcb4c055b@syzkaller.appspotmail.com> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210712185436.GB326369@rowland.harvard.edu Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Alan Stern authored
[ Upstream commit 60dfe484 ] The USB core has utility routines to retrieve various types of descriptors. These routines will now provoke a WARN if they are asked to retrieve 0 bytes (USB "receive" requests must not have zero length), so avert this by checking the size argument at the start. CC: Johan Hovold <johan@kernel.org> Reported-and-tested-by:
<syzbot+7dbcd9ff34dc4ed45240@syzkaller.appspotmail.com> Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/20210607152307.GD1768031@rowland.harvard.edu Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Wanpeng Li authored
[ Upstream commit da6393cd ] Reported by syzkaller: WARNING: CPU: 7 PID: 10526 at linux/arch/x86/kvm//x86.c:7621 x86_emulate_instruction+0x41b/0x510 [kvm] RIP: 0010:x86_emulate_instruction+0x41b/0x510 [kvm] Call Trace: kvm_mmu_page_fault+0x126/0x8f0 [kvm] vmx_handle_exit+0x11e/0x680 [kvm_intel] vcpu_enter_guest+0xd95/0x1b40 [kvm] kvm_arch_vcpu_ioctl_run+0x377/0x6a0 [kvm] kvm_vcpu_ioctl+0x389/0x630 [kvm] __x64_sys_ioctl+0x8e/0xd0 do_syscall_64+0x3c/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Commit 4a1e10d5 ("KVM: x86: handle hardware breakpoints during emulation()) adds hardware breakpoints check before emulation the instruction and parts of emulation context initialization, actually we don't have the EMULTYPE_NO_DECODE flag here and the emulation context will not be reused. Commit c8848cee ("KVM: x86: set ctxt->have_exception in x86_decode_insn()) triggers the warning because it catches the stale emulation context has #UD, however, it is not during instruction decoding which should result in EMULATION_FAILED. This patch fixes it by moving the second part emulation context initialization into init_emulate_ctxt() and before hardware breakpoints check. The ctxt->ud will be dropped by a follow-up patch. syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=134683fdd00000 Reported-by:
<syzbot+71271244f206d17f6441@syzkaller.appspotmail.com> Fixes: 4a1e10d5 (KVM: x86: handle hardware breakpoints during emulation) Signed-off-by:
Wanpeng Li <wanpengli@tencent.com> Reviewed-by:
Sean Christopherson <seanjc@google.com> Message-Id: <1622160097-37633-1-git-send-email-wanpengli@tencent.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Wei Huang authored
[ Upstream commit 4aa2691d ] Move the instruction decode part out of x86_emulate_instruction() for it to be used in other places. Also kvm_clear_exception_queue() is moved inside the if-statement as it doesn't apply when KVM are coming back from userspace. Co-developed-by:
Bandan Das <bsd@redhat.com> Signed-off-by:
Bandan Das <bsd@redhat.com> Signed-off-by:
Wei Huang <wei.huang2@amd.com> Message-Id: <20210126081831.570253-2-wei.huang2@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pavel Skripkin authored
[ Upstream commit 9c39be40 ] syzbot reported memory leak in zr364xx_probe()[1]. The problem was in invalid error handling order. All error conditions rigth after v4l2_ctrl_handler_init() must call v4l2_ctrl_handler_free(). Reported-by:
<syzbot+efe9aefc31ae1e6f7675@syzkaller.appspotmail.com> Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit ea354b6d ] Syzbot discovered that the probe error handling doesn't clean up the resources allocated in zr364xx_board_init(). There are several related bugs in this code so I have re-written the error handling. 1) Introduce a new function zr364xx_board_uninit() which cleans up the resources in zr364xx_board_init(). 2) In zr364xx_board_init() if the call to zr364xx_start_readpipe() fails then release the "cam->buffer.frame[i].lpvbits" memory before returning. This way every function either allocates everything successfully or it cleans up after itself. 3) Re-write the probe function so that each failure path goto frees the most recent allocation. That way we don't free anything before it has been allocated and we can also verify that everything is freed. 4) Originally, in the probe function the "cam->v4l2_dev.release" pointer was set to "zr364xx_release" near the start but I moved that assignment to the end, after everything had succeeded. The release function was never actually called during the probe cleanup process, but with this change I wanted to make it clear that we don't want to call zr364xx_release() until everything is allocated successfully. Next I re-wrote the zr364xx_release() function. Ideally this would have been a simple matter of copy and pasting the cleanup code from probe and adding an additional call to video_unregister_device(). But there are a couple quirks to note. 1) The probe function does not call videobuf_mmap_free() and I don't know where the videobuf_mmap is allocated. I left the code as-is to avoid introducing a bug in code I don't understand. 2) The zr364xx_board_uninit() has a call to zr364xx_stop_readpipe() which is a change from the original behavior with regards to unloading the driver. Calling zr364xx_stop_readpipe() on a stopped pipe is not a problem so this is safe and is potentially a bugfix. Reported-by:
<syzbot+b4d54814b339b5c6bbd4@syzkaller.appspotmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-