- Nov 03, 2022
-
-
James Clark authored
commit 6746eae4 upstream. cti_enable_hw() and cti_disable_hw() are called from an atomic context so shouldn't use runtime PM because it can result in a sleep when communicating with firmware. Since commit 3c665633 ("Revert "firmware: arm_scmi: Add clock management to the SCMI power domain""), this causes a hang on Juno when running the Perf Coresight tests or running this command: perf record -e cs_etm//u -- ls This was also missed until the revert commit because pm_runtime_put() was called with the wrong device until commit 692c9a49 ("coresight: cti: Correct the parameter for pm_runtime_put") With lock and scheduler debugging enabled the following is output: coresight cti_sys0: cti_enable_hw -- dev:cti_sys0 parent: 20020000.cti BUG: sleeping function called from invalid context at drivers/base/power/runtime.c:1151 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 330, name: perf-exec preempt_count: 2, expected: 0 RCU nest depth: 0, expected: 0 INFO: lockdep is turned off. irq event stamp: 0 hardirqs last enabled at (0): [<0000000000000000>] 0x0 hardirqs last disabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948 softirqs last enabled at (0): [<ffff80000822b394>] copy_process+0xa0c/0x1948 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 3 PID: 330 Comm: perf-exec Not tainted 6.0.0-00053-g042116d99298 #7 Hardware name: ARM LTD ARM Juno Development Platform/ARM Juno Development Platform, BIOS EDK II Sep 13 2022 Call trace: dump_backtrace+0x134/0x140 show_stack+0x20/0x58 dump_stack_lvl+0x8c/0xb8 dump_stack+0x18/0x34 __might_resched+0x180/0x228 __might_sleep+0x50/0x88 __pm_runtime_resume+0xac/0xb0 cti_enable+0x44/0x120 coresight_control_assoc_ectdev+0xc0/0x150 coresight_enable_path+0xb4/0x288 etm_event_start+0x138/0x170 etm_event_add+0x48/0x70 event_sched_in.isra.122+0xb4/0x280 merge_sched_in+0x1fc/0x3d0 visit_groups_merge.constprop.137+0x16c/0x4b0 ctx_sched_in+0x114/0x1f0 perf_event_sched_in+0x60/0x90 ctx_resched+0x68/0xb0 perf_event_exec+0x138/0x508 begin_new_exec+0x52c/0xd40 load_elf_binary+0x6b8/0x17d0 bprm_execve+0x360/0x7f8 do_execveat_common.isra.47+0x218/0x238 __arm64_sys_execve+0x48/0x60 invoke_syscall+0x4c/0x110 el0_svc_common.constprop.4+0xfc/0x120 do_el0_svc+0x34/0xc0 el0_svc+0x40/0x98 el0t_64_sync_handler+0x98/0xc0 el0t_64_sync+0x170/0x174 Fix the issue by removing the runtime PM calls completely. They are not needed here because it must have already been done when building the path for a trace. Fixes: 835d722b ("coresight: cti: Initial CoreSight CTI Driver") Cc: stable <stable@kernel.org> Reported-by: Aishwarya TCV <Aishwarya.TCV@arm.com> Reported-by: Cristian Marussi <Cristian.Marussi@arm.com> Suggested-by: Suzuki K Poulose <suzuki.poulose@arm.com> Signed-off-by: James Clark <james.clark@arm.com> Reviewed-by: Mike Leach <mike.leach@linaro.org> Tested-by: Mike Leach <mike.leach@linaro.org> [ Fix build warnings ] Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com> Link: https://lore.kernel.org/r/20221025131032.1149459-1-suzuki.poulose@arm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit a79343dc upstream. Device-managed resources allocated post component bind must be tied to the lifetime of the aggregate DRM device or they will not necessarily be released when binding of the aggregate device is deferred. This is specifically true for the DP IRQ, which will otherwise remain requested so that the next bind attempt fails when requesting the IRQ a second time. Since commit c3bf8e21 ("drm/msm/dp: Add eDP support via aux_bus") this can happen when the aux-bus panel driver has not yet been loaded so that probe is deferred. Fix this by tying the device-managed lifetime of the DP IRQ to the DRM device so that it is released when bind fails. Fixes: c943b494 ("drm/msm/dp: add displayPort driver support") Cc: stable@vger.kernel.org # 5.10 Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Patchwork: https://patchwork.freedesktop.org/patch/502679/ Link: https://lore.kernel.org/r/20220913085320.8577-6-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 4c1294da upstream. Add the missing sanity check on the bridge counter to avoid corrupting data beyond the fixed-sized bridge array in case there are ever more than eight bridges. Fixes: a3376e3e ("drm/msm: convert to drm_bridge") Cc: stable@vger.kernel.org # 3.12 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/502670/ Link: https://lore.kernel.org/r/20220913085320.8577-5-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 2e786eb2 upstream. Add the missing sanity check on the bridge counter to avoid corrupting data beyond the fixed-sized bridge array in case there are ever more than eight bridges. Fixes: a689554b ("drm/msm: Initial add DSI connector support") Cc: stable@vger.kernel.org # 4.1 Signed-off-by: Johan Hovold <johan+linaro@kernel.org> Tested-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Patchwork: https://patchwork.freedesktop.org/patch/502668/ Link: https://lore.kernel.org/r/20220913085320.8577-4-johan+linaro@kernel.org Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Prike Liang authored
commit d61e1d1d upstream. In the S2idle suspend/resume phase the gfxoff is keeping functional so some IP blocks will be likely to reinitialize at gfxoff entry and that will result in failing to program GC registers.Therefore, let disallow gfxoff until AMDGPU IPs reinitialized completely. Signed-off-by: Prike Liang <Prike.Liang@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org # 5.15.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Manish Rangankar authored
commit 0b863257 upstream. One of the sysfs values reported for supported_speeds was not valid (20Gb/s reported instead of 64Gb/s). Instead of driver internal speed mask definition, use speed mask defined in transport_fc for reporting host->supported_speeds. Link: https://lore.kernel.org/r/20220927115946.17559-1-njavali@marvell.com Cc: stable@vger.kernel.org Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miquel Raynal authored
commit 5a5c4e06 upstream. Back in 2014, the LQI was saved in the skb control buffer (skb->cb, or mac_cb(skb)) without any actual reset of this area prior to its use. As part of a useful rework of the use of this region, 32edc40a ("ieee802154: change _cb handling slightly") introduced mac_cb_init() to basically memset the cb field to 0. In particular, this new function got called at the beginning of mac802154_parse_frame_start(), right before the location where the buffer got actually filled. What went through unnoticed however, is the fact that the very first helper called by device drivers in the receive path already used this area to save the LQI value for later extraction. Resetting the cb field "so late" led to systematically zeroing the LQI. If we consider the reset of the cb field needed, we can make it as soon as we get an skb from a device driver, right before storing the LQI, as is the very first time we need to write something there. Cc: stable@vger.kernel.org Fixes: 32edc40a ("ieee802154: change _cb handling slightly") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20221020142535.1038885-1-miquel.raynal@bootlin.com Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bernd Edlinger authored
commit 5bf2fedc upstream. unshare_sighand should only access oldsighand->action while holding oldsighand->siglock, to make sure that newsighand->action is in a consistent state. Signed-off-by: Bernd Edlinger <bernd.edlinger@hotmail.de> Cc: stable@vger.kernel.org Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Kees Cook <keescook@chromium.org> Link: https://lore.kernel.org/r/AM8PR10MB470871DEBD1DED081F9CC391E4389@AM8PR10MB4708.EURPRD10.PROD.OUTLOOK.COM Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Li Zetao authored
commit 594d2a14 upstream. There is a memory leak reported by kmemleak: unreferenced object 0xffff88817104ef80 (size 224): comm "xfs_admin", pid 47165, jiffies 4298708825 (age 1333.476s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 60 a8 b3 00 81 88 ff ff a8 10 5a 00 81 88 ff ff `.........Z..... backtrace: [<ffffffff819171e1>] __alloc_file+0x21/0x250 [<ffffffff81918061>] alloc_empty_file+0x41/0xf0 [<ffffffff81948cda>] path_openat+0xea/0x3d30 [<ffffffff8194ec89>] do_filp_open+0x1b9/0x290 [<ffffffff8192660e>] do_open_execat+0xce/0x5b0 [<ffffffff81926b17>] open_exec+0x27/0x50 [<ffffffff81a69250>] load_elf_binary+0x510/0x3ed0 [<ffffffff81927759>] bprm_execve+0x599/0x1240 [<ffffffff8192a997>] do_execveat_common.isra.0+0x4c7/0x680 [<ffffffff8192b078>] __x64_sys_execve+0x88/0xb0 [<ffffffff83bbf0a5>] do_syscall_64+0x35/0x80 If "interp_elf_ex" fails to allocate memory in load_elf_binary(), the program will take the "out_free_ph" error handing path, resulting in "interpreter" file resource is not released. Fix it by adding an error handing path "out_free_file", which will release the file resource when "interp_elf_ex" failed to allocate memory. Fixes: 0693ffeb ("fs/binfmt_elf.c: allocate less for static executable") Signed-off-by: Li Zetao <lizetao1@huawei.com> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Kees Cook <keescook@chromium.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221024154421.982230-1-lizetao1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rafael J. Wysocki authored
commit f5c8cf2a upstream. Commit 46573fd6 ("cpufreq: intel_pstate: hybrid: Rework HWP calibration") attempted to use the information from CPPC (the nominal performance in particular) to obtain the scaling factor allowing the frequency to be computed if the HWP performance level of the given CPU is known or vice versa. However, it turns out that on some platforms this doesn't work, because the CPPC information on them does not align with the contents of the MSR_HWP_CAPABILITIES registers. This basically means that the only way to make intel_pstate work on all of the hybrid platforms to date is to use the observation that on all of them the scaling factor between the HWP performance levels and frequency for P-cores is 78741 (approximately 100000/1.27). For E-cores it is 100000, which is the same as for all of the non-hybrid "core" platforms and does not require any changes. Accordingly, make intel_pstate use 78741 as the scaling factor between HWP performance levels and frequency for P-cores on all hybrid platforms and drop the dependency of the HWP calibration code on CPPC. Fixes: 46573fd6 ("cpufreq: intel_pstate: hybrid: Rework HWP calibration") Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: 5.15+ <stable@vger.kernel.org> # 5.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rafael J. Wysocki authored
commit 8dbab94d upstream. Some of the MSR accesses in intel_pstate are carried out on the CPU that is running the code, but the values coming from them are used for the performance scaling of the other CPUs. This is problematic, for example, on hybrid platforms where MSR_TURBO_RATIO_LIMIT for P-cores and E-cores is different, so the values read from it on a P-core are generally not applicable to E-cores and the other way around. For this reason, make the driver access all MSRs on the target CPU on platforms using the "core" pstate_funcs callbacks which is the case for all of the hybrid platforms released to date. For this purpose, pass a CPU argument to the ->get_max(), ->get_max_physical(), ->get_min() and ->get_turbo() pstate_funcs callbacks and from there pass it to rdmsrl_on_cpu() or rdmsrl_safe_on_cpu() to access the MSR on the target CPU. Fixes: 46573fd6 ("cpufreq: intel_pstate: hybrid: Rework HWP calibration") Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Tested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: 5.15+ <stable@vger.kernel.org> # 5.15+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hyunwoo Kim authored
commit cc67482c upstream. Several types of UAFs can occur when physically removing a USB device. Adds ufx_ops_destroy() function to .fb_destroy of fb_ops, and in this function, there is kref_put() that finally calls ufx_free(). This fix prevents multiple UAFs. Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com> Link: https://lore.kernel.org/linux-fbdev/20221011153436.GA4446@ubuntu/ Cc: <stable@vger.kernel.org> Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matti Vaittinen authored
commit ab0ee36e upstream. The iio_triggered_buffer_setup_ext() was changed by commit 15097c7a ("iio: buffer: wrap all buffer attributes into iio_dev_attr") to silently expect that all attributes given in buffer_attrs array are device-attributes. This expectation was not forced by the API - and some drivers did register attributes created by IIO_CONST_ATTR(). The added attribute "wrapping" does not copy the pointer to stored string constant and when the sysfs file is read the kernel will access to invalid location. Change the IIO_CONST_ATTRs from the driver to IIO_DEVICE_ATTR in order to prevent the invalid memory access. Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Fixes: 15097c7a ("iio: buffer: wrap all buffer attributes into iio_dev_attr") Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/19158499623cdf7f9c5efae1f13c9f1a918ff75f.1664782676.git.mazziesaccount@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Cosmin Tanislav authored
commit 4132f191 upstream. Currently, every time the device wakes up from sleep, the iio_chan array is reallocated, leaking the previous one until the device is removed (basically never). Move the allocation to the probe function to avoid this. Signed-off-by: Cosmin Tanislav <cosmin.tanislav@analog.com> Fixes: f110f318 ("iio: temperature: Add support for LTC2983") Cc: <Stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221014123724.1401011-2-demonsingur@gmail.com Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shreeya Patel authored
commit 0dec4d2f upstream. tsl2583 probe() uses devm_iio_device_register() and calling iio_device_unregister() causes the unregister to occur twice. s Switch to iio_device_register() instead of devm_iio_device_register() in probe to avoid the device managed cleanup. Fixes: 371894f5 ("iio: tsl2583: add runtime power management support") Signed-off-by: Shreeya Patel <shreeya.patel@collabora.com> Link: https://lore.kernel.org/r/20220826122352.288438-1-shreeya.patel@collabora.com Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matti Vaittinen authored
commit 72b2aa38 upstream. The iio_utils uses a digit calculation in order to know length of the file name containing a buffer number. The digit calculation does not work for number 0. This leads to allocation of one character too small buffer for the file-name when file name contains value '0'. (Eg. buffer0). Fix digit calculation by returning one digit to be present for number '0'. Fixes: 096f9b86 ("tools:iio:iio_utils: implement digit calculation") Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/Y0f+tKCz+ZAIoroQ@dc75zzyyyyyyyyyyyyycy-3.rev.dnainternet.fi Cc: <Stable@vger.kernel.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit 5aed5b7c upstream. Endpoints are normally deleted from the bandwidth list when they are dropped, before the virt device is freed. If xHC host is dying or being removed then the endpoints aren't dropped cleanly due to functions returning early to avoid interacting with a non-accessible host controller. So check and delete endpoints that are still on the bandwidth list when freeing the virt device. Solves a list_del corruption kernel crash when unbinding xhci-pci, caused by xhci_mem_cleanup() when it later tried to delete already freed endpoints from the bandwidth list. This only affects hosts that use software bandwidth checking, which currenty is only the xHC in intel Panther Point PCH (Ivy Bridge) Cc: stable@vger.kernel.org Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-5-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mario Limonciello authored
commit a611bf47 upstream. For optimal power consumption of USB4 routers the XHCI PCIe endpoint used for tunneling must be in D3. Historically this is accomplished by a long list of PCIe IDs that correspond to these endpoints because the xhci_hcd driver will not default to allowing runtime PM for all devices. As both AMD and Intel have released new products with new XHCI controllers this list continues to grow. In reviewing the XHCI specification v1.2 on page 607 there is already a requirement that the PCI power management states D3hot and D3cold must be supported. In the quirk list, use this to indicate that runtime PM should be allowed on XHCI controllers. The following controllers are known to be xHC 1.2 and dropped explicitly: * AMD Yellow Carp * Intel Alder Lake * Intel Meteor Lake * Intel Raptor Lake [keep PCI ID for Alder Lake PCH for recently added quirk -Mathias] Cc: stable@vger.kernel.org Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://www.intel.com/content/dam/www/public/us/en/documents/technical-specifications/extensible-host-controler-interface-usb-xhci.pdf Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-4-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit 34cd2db4 upstream. Systems based on Alder Lake P see significant boot time delay if boot firmware tries to control usb ports in unexpected link states. This is seen with self-powered usb devices that survive in U3 link suspended state over S5. A more generic solution to power off ports at shutdown was attempted in commit 83810f84 ("xhci: turn off port power in shutdown") but it caused regression. Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and ports back to default state in shutdown. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tony O'Brien authored
commit ce107713 upstream. Originally the absence of the marvell,nand-keep-config property caused the setup_data_interface function to be provided. However when setup_data_interface was moved into nand_controller_ops the logic was unintentionally inverted. Update the logic so that only if the marvell,nand-keep-config property is present the bootloader NAND config kept. Cc: stable@vger.kernel.org Fixes: 7a08dbae ("mtd: rawnand: Move ->setup_data_interface() to nand_controller_ops") Signed-off-by: Tony O'Brien <tony.obrien@alliedtelesis.co.nz> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220927024728.28447-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jens Glathe authored
commit 4f547472 upstream. This appears to fix the error: "xhci_hcd <address>; ERROR Transfer event TRB DMA ptr not part of current TD ep_index 2 comp_code 13" that appear spuriously (or pretty often) when using a r8152 USB3 ethernet adapter with integrated hub. ASM1042 reports as a 0.96 controller, but appears to behave more like 1.0 Inspired by this email thread: https://markmail.org/thread/7vzqbe7t6du6qsw3 Cc: stable@vger.kernel.org Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20221024142720.4122053-2-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Justin Chen authored
commit fb8f60dd upstream. When port is connected and then disconnected, the state stays as configured. Which is incorrect as the port is no longer configured, but in a not attached state. Signed-off-by: Justin Chen <justinpopo6@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Fixes: efed421a ("usb: gadget: Add UDC driver for Broadcom USB3.0 device controller IP BDC") Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/1664997235-18198-1-git-send-email-justinpopo6@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thinh Nguyen authored
commit 308c316d upstream. The gadget driver may have a certain expectation of how the request completion flow should be from to its configuration. Make sure the controller driver respect that. That is, don't set IMI (Interrupt on Missed Isoc) when usb_request->no_interrupt is set. Also, the driver should only set IMI to the last TRB of a chain. Fixes: 72246da4 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable@vger.kernel.org Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Jeff Vanhoof <jdv1029@gmail.com> Tested-by: Jeff Vanhoof <jdv1029@gmail.com> Link: https://lore.kernel.org/r/ced336c84434571340c07994e3667a0ee284fefe.1666735451.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thinh Nguyen authored
commit f78961f8 upstream. When servicing a transfer completion event, the dwc3 driver will reclaim TRBs of started requests up to the request associated with the interrupt event. Currently we don't check for interrupt due to missed isoc, and the driver may attempt to reclaim TRBs beyond the associated event. This causes invalid memory access when the hardware still owns the TRB. If there's a missed isoc TRB with IMI (interrupt on missed isoc), make sure to stop servicing further. Note that only the last TRB of chained TRBs has its status updated with missed isoc. Fixes: 72246da4 ("usb: Introduce DesignWare USB3 DRD Driver") Cc: stable@vger.kernel.org Reported-by: Jeff Vanhoof <jdv1029@gmail.com> Reported-by: Dan Vacura <w36195@motorola.com> Signed-off-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com> Reviewed-by: Jeff Vanhoof <jdv1029@gmail.com> Tested-by: Jeff Vanhoof <jdv1029@gmail.com> Link: https://lore.kernel.org/r/b29acbeab531b666095dfdafd8cb5c7654fbb3e1.1666735451.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeff Vanhoof authored
commit b57b08e6 upstream. In uvc_video_encode_isoc_sg, the uvc_request's sg list is incorrectly being populated leading to corrupt video being received by the remote end. When building the sg list the usage of buf->sg's 'dma_length' field is not correct and instead its 'length' field should be used. Fixes: e81e7f9a ("usb: gadget: uvc: add scatter gather support") Cc: <stable@vger.kernel.org> Signed-off-by: Jeff Vanhoof <qjv001@motorola.com> Signed-off-by: Dan Vacura <w36195@motorola.com> Link: https://lore.kernel.org/r/20221018215044.765044-5-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Vacura authored
commit 0a0a2760 upstream. If there is a transmission error the buffer will be returned too early, causing a memory fault as subsequent requests for that buffer are still queued up to be sent. Refactor the error handling to wait for the final request to come in before reporting back the buffer to userspace for all transfer types (bulk/isoc/isoc_sg). This ensures userspace knows if the frame was successfully sent. Fixes: e81e7f9a ("usb: gadget: uvc: add scatter gather support") Cc: <stable@vger.kernel.org> Signed-off-by: Dan Vacura <w36195@motorola.com> Link: https://lore.kernel.org/r/20221018215044.765044-4-w36195@motorola.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Hannu Hartikainen authored
commit fc4ade55 upstream. NVIDIA Jetson devices in Force Recovery mode (RCM) do not support suspending, ie. flashing fails if the device has been suspended. The devices are still visible in lsusb and seem to work otherwise, making the issue hard to debug. This has been discovered in various forum posts, eg. [1]. The patch has been tested on NVIDIA Jetson AGX Xavier, but I'm adding all the Jetson models listed in [2] on the assumption that they all behave similarly. [1]: https://forums.developer.nvidia.com/t/flashing-not-working/72365 [2]: https://docs.nvidia.com/jetson/archives/l4t-archived/l4t-3271/index.html#page/Tegra%20Linux%20Driver%20Package%20Development%20Guide/quick_start.html Signed-off-by: Hannu Hartikainen <hannu@hrtk.in> Cc: stable <stable@kernel.org> # after 6.1-rc3 Link: https://lore.kernel.org/r/20220919171610.30484-1-hannu@hrtk.in Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason A. Donenfeld authored
commit 50895a55 upstream. With char becoming unsigned by default, and with `char` alone being ambiguous and based on architecture, signed chars need to be marked explicitly as such. This fixes warnings like: sound/pci/rme9652/hdsp.c:3953 hdsp_channel_buffer_location() warn: 'hdsp->channel_map[channel]' is unsigned sound/pci/rme9652/hdsp.c:4153 snd_hdsp_channel_info() warn: impossible condition '(hdsp->channel_map[channel] < 0) => (0-255 < 0)' sound/pci/rme9652/rme9652.c:1833 rme9652_channel_buffer_location() warn: 'rme9652->channel_map[channel]' is unsigned Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221025000313.546261-1-Jason@zx2c4.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason A. Donenfeld authored
commit ee03c0f2 upstream. With char becoming unsigned by default, and with `char` alone being ambiguous and based on architecture, signed chars need to be marked explicitly as such. This fixes warnings like: sound/pci/au88x0/au88x0_core.c:2029 vortex_adb_checkinout() warn: signedness bug returning '(-22)' sound/pci/au88x0/au88x0_core.c:2046 vortex_adb_checkinout() warn: signedness bug returning '(-12)' sound/pci/au88x0/au88x0_core.c:2125 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, (0), en, 0)' is unsigned sound/pci/au88x0/au88x0_core.c:2170 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, stream->resources, en, 4)' is unsigned As well, since one function returns errnos, return an `int` rather than a `signed char`. Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221024162929.536004-1-Jason@zx2c4.com Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 79481452 upstream. M-Audio Fast Track C400 and C600 devices (0763:2030 and 0763:2031, respectively) seem requiring the explicit setup for the implicit feedback mode. This patch adds the quirk entries for those. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214817 Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20221021122722.24784-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (Google) authored
commit f0a86878 upstream. The current code for freeing the emux timer is extremely dangerous: CPU0 CPU1 ---- ---- snd_emux_timer_callback() snd_emux_free() spin_lock(&emu->voice_lock) del_timer(&emu->tlist); <-- returns immediately spin_unlock(&emu->voice_lock); [..] kfree(emu); spin_lock(&emu->voice_lock); [BOOM!] Instead just use del_timer_sync() which will wait for the timer to finish before continuing. No need to check if the timer is active or not when doing so. This doesn't fix the race of a possible re-arming of the timer, but at least it won't use the data that has just been freed. [ Fixed unused variable warning by tiwai ] Cc: stable@vger.kernel.org Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221026231236.6834b551@gandalf.local.home Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Anssi Hannula authored
commit 2871edb3 upstream. kvaser_usb uses completions to signal when a response event is received for outgoing commands. However, it uses init_completion() to reinitialize the start_comp and stop_comp completions before sending the start/stop commands. In case the device sends the corresponding response just before the actual command is sent, complete() may be called concurrently with init_completion() which is not safe. This might be triggerable even with a properly functioning device by stopping the interface (CMD_STOP_CHIP) just after it goes bus-off (which also causes the driver to send CMD_STOP_CHIP when restart-ms is off), but that was not tested. Fix the issue by using reinit_completion() instead. Fixes: 080f40a6 ("can: kvaser_usb: Add support for Kvaser CAN/USB devices") Tested-by: Jimmy Assarsson <extja@kvaser.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Signed-off-by: Jimmy Assarsson <extja@kvaser.com> Link: https://lore.kernel.org/all/20221010185237.319219-2-extja@kvaser.com Cc: stable@vger.kernel.org Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yang Yingliang authored
commit c3c06c61 upstream. It is not allowed to call kfree_skb() from hardware interrupt context or with interrupts being disabled. The skb is unlinked from the queue, so it can be freed after spin_unlock_irqrestore(). Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Acked-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/all/20221027091237.2290111-1-yangyingliang@huawei.com Cc: stable@vger.kernel.org [mkl: adjust subject] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Scott Mayhew authored
commit 4f40a5b5 upstream. This was missed in c3ed2227 ("NFSv4: Fix free of uninitialized nfs4_label on referral lookup.") and causes a panic when mounting with '-o trunkdiscovery': PID: 1604 TASK: ffff93dac3520000 CPU: 3 COMMAND: "mount.nfs" #0 [ffffb79140f738f8] machine_kexec at ffffffffaec64bee #1 [ffffb79140f73950] __crash_kexec at ffffffffaeda67fd #2 [ffffb79140f73a18] crash_kexec at ffffffffaeda76ed #3 [ffffb79140f73a30] oops_end at ffffffffaec2658d #4 [ffffb79140f73a50] general_protection at ffffffffaf60111e [exception RIP: nfs_fattr_init+0x5] RIP: ffffffffc0c18265 RSP: ffffb79140f73b08 RFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff93dac304a800 RCX: 0000000000000000 RDX: ffffb79140f73bb0 RSI: ffff93dadc8cbb40 RDI: d03ee11cfaf6bd50 RBP: ffffb79140f73be8 R8: ffffffffc0691560 R9: 0000000000000006 R10: ffff93db3ffd3df8 R11: 0000000000000000 R12: ffff93dac4040000 R13: ffff93dac2848e00 R14: ffffb79140f73b60 R15: ffffb79140f73b30 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #5 [ffffb79140f73b08] _nfs41_proc_get_locations at ffffffffc0c73d53 [nfsv4] #6 [ffffb79140f73bf0] nfs4_proc_get_locations at ffffffffc0c83e90 [nfsv4] #7 [ffffb79140f73c60] nfs4_discover_trunking at ffffffffc0c83fb7 [nfsv4] #8 [ffffb79140f73cd8] nfs_probe_fsinfo at ffffffffc0c0f95f [nfs] #9 [ffffb79140f73da0] nfs_probe_server at ffffffffc0c1026a [nfs] RIP: 00007f6254fce26e RSP: 00007ffc69496ac8 RFLAGS: 00000246 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f6254fce26e RDX: 00005600220a82a0 RSI: 00005600220a64d0 RDI: 00005600220a6520 RBP: 00007ffc69496c50 R8: 00005600220a8710 R9: 003035322e323231 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffc69496c50 R13: 00005600220a8440 R14: 0000000000000010 R15: 0000560020650ef9 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b Fixes: c3ed2227 ("NFSv4: Fix free of uninitialized nfs4_label on referral lookup.") Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Benjamin Coddington authored
commit c3ed2227 upstream. Send along the already-allocated fattr along with nfs4_fs_locations, and drop the memcpy of fattr. We end up growing two more allocations, but this fixes up a crash as: PID: 790 TASK: ffff88811b43c000 CPU: 0 COMMAND: "ls" #0 [ffffc90000857920] panic at ffffffff81b9bfde #1 [ffffc900008579c0] do_trap at ffffffff81023a9b #2 [ffffc90000857a10] do_error_trap at ffffffff81023b78 #3 [ffffc90000857a58] exc_stack_segment at ffffffff81be1f45 #4 [ffffc90000857a80] asm_exc_stack_segment at ffffffff81c009de #5 [ffffc90000857b08] nfs_lookup at ffffffffa0302322 [nfs] #6 [ffffc90000857b70] __lookup_slow at ffffffff813a4a5f #7 [ffffc90000857c60] walk_component at ffffffff813a86c4 #8 [ffffc90000857cb8] path_lookupat at ffffffff813a9553 #9 [ffffc90000857cf0] filename_lookup at ffffffff813ab86b Suggested-by: Trond Myklebust <trondmy@hammerspace.com> Fixes: 9558a007 ("NFS: Remove the label from the nfs4_lookup_res struct") Signed-off-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Oct 29, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20221027165054.917467648@linuxfoundation.org Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>=20> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/20221028120302.594918388@linuxfoundation.org Tested-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by: Ron Economos <re@w6rz.net> Tested-by: Florian Fainelli <f.fainelli@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>=20> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Seth Jenkins authored
Commit 258f669e ("mm: /proc/pid/smaps_rollup: convert to single value seq_file") introduced a null-deref if there are no vma's in the task in show_smaps_rollup. Fixes: 258f669e ("mm: /proc/pid/smaps_rollup: convert to single value seq_file") Signed-off-by: Seth Jenkins <sethjenkins@google.com> Reviewed-by: Alexey Dobriyan <adobriyan@gmail.com> Tested-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Avri Altman authored
commit 07d2872b upstream. Some SD-cards from Sandisk that are SDA-6.0 compliant reports they supports discard, while they actually don't. This might cause mk2fs to fail while trying to format the card and revert it to a read-only mode. To fix this problem, let's add a card quirk (MMC_QUIRK_BROKEN_SD_DISCARD) to indicate that we shall fall-back to use the legacy erase command instead. Signed-off-by: Avri Altman <avri.altman@wdc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220928095744.16455-1-avri.altman@wdc.com [Ulf: Updated the commit message] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nick Desaulniers authored
This is _not_ an upstream commit and just for 5.15.y only. It is based on commit 32ef9e50 upstream. Alexey reported that the fraction of unknown filename instances in kallsyms grew from ~0.3% to ~10% recently; Bill and Greg tracked it down to assembler defined symbols, which regressed as a result of: commit b8a90923 ("Kbuild: do not emit debug info for assembly with LLVM_IAS=1") In that commit, I allude to restoring debug info for assembler defined symbols in a follow up patch, but it seems I forgot to do so in commit a66049e2 ("Kbuild: make DWARF version a choice") Fixes: b8a90923 ("Kbuild: do not emit debug info for assembly with LLVM_IAS=1") Signed-off-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nathan Chancellor authored
commit 33806e7c upstream. A recent change in LLVM made CONFIG_EFI_STUB unselectable because it no longer pretends to support -mabi=ms, breaking the dependency in Kconfig. Lack of CONFIG_EFI_STUB can prevent kernels from booting via EFI in certain circumstances. This check was added by 8f24f8c2 ("efi/libstub: Annotate firmware routines as __efiapi") to ensure that __attribute__((ms_abi)) was available, as -mabi=ms is not actually used in any cflags. According to the GCC documentation, this attribute has been supported since GCC 4.4.7. The kernel currently requires GCC 5.1 so this check is not necessary; even when that change landed in 5.6, the kernel required GCC 4.9 so it was unnecessary then as well. Clang supports __attribute__((ms_abi)) for all versions that are supported for building the kernel so no additional check is needed. Remove the 'depends on' line altogether to allow CONFIG_EFI_STUB to be selected when CONFIG_EFI is enabled, regardless of compiler. Fixes: 8f24f8c2 ("efi/libstub: Annotate firmware routines as __efiapi") Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Borislav Petkov <bp@suse.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Cc: stable@vger.kernel.org Link: https://github.com/llvm/llvm-project/commit/d1ad006a8f64bdc17f618deffa9e7c91d82c444d [nathan: Fix conflict due to lack of c6dbd3e5 in older trees] Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-