- Nov 03, 2021
-
-
Eric Dumazet authored
commit 6457378f upstream. A group of security researchers brought to our attention the weakness of hash function used in fnhe_hashfun(). Lets use siphash instead of Jenkins Hash, to considerably reduce security risks. Also remove the inline keyword, this really is distracting. Fixes: d546c621 ("ipv4: harden fnhe_hashfun()") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Keyu Man <kman001@ucr.edu> Cc: Willy Tarreau <w@1wt.eu> Signed-off-by:
David S. Miller <davem@davemloft.net> [OP: adjusted context for 5.4 stable] Signed-off-by:
Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
commit 4785305c upstream. A group of security researchers brought to our attention the weakness of hash function used in rt6_exception_hash() Lets use siphash instead of Jenkins Hash, to considerably reduce security risks. Following patch deals with IPv4. Fixes: 35732d01 ("ipv6: introduce a hash table to store dst cache") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
Keyu Man <kman001@ucr.edu> Cc: Wei Wang <weiwan@google.com> Cc: Martin KaFai Lau <kafai@fb.com> Acked-by:
Wei Wang <weiwan@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> [OP: adjusted context for 5.4 stable] Signed-off-by:
Ovidiu Panait <ovidiu.panait@windriver.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Naveen N Rao authored
commit 8bbc9d82 upstream. Only ignore the operation if dividing by 1. Fixes: 156d0e29 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF") Signed-off-by:
Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Tested-by:
Johan Almbladh <johan.almbladh@anyfinetworks.com> Reviewed-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Acked-by:
Song Liu <songliubraving@fb.com> Acked-by:
Johan Almbladh <johan.almbladh@anyfinetworks.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/c674ca18c3046885602caebb326213731c675d06.1633464148.git.naveen.n.rao@linux.vnet.ibm.com [cascardo: use PPC_LI instead of EMIT(PPC_RAW_LI)] Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 48ccc8ed upstream. In randconfig builds, we sometimes come across this warning: arm-linux-gnueabi-ld: XIP start address may cause MPU programming issues While this is helpful for actual systems to figure out why it fails, the warning does not provide any benefit for build testing, so guard it in a check for CONFIG_COMPILE_TEST, which is usually set on randconfig builds. Fixes: 21621830 ("ARM: 8713/1: NOMMU: Support MPU in XIP configuration") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 1f323127 upstream. With extra warnings enabled, gcc complains about this function definition: arch/arm/probes/kprobes/core.c: In function 'arch_init_kprobes': arch/arm/probes/kprobes/core.c:465:12: warning: old-style function definition [-Wold-style-definition] 465 | int __init arch_init_kprobes() Link: https://lore.kernel.org/all/20201027093057.c685a14b386acacb3c449e3d@kernel.org/ Fixes: 24ba613c ("ARM kprobes: core code") Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit eaf6cc71 upstream. Both the decompressor code and the kasan logic try to override the memcpy() and memmove() definitions, which leading to a clash in a KASAN-enabled kernel with XZ decompression: arch/arm/boot/compressed/decompress.c:50:9: error: 'memmove' macro redefined [-Werror,-Wmacro-redefined] #define memmove memmove ^ arch/arm/include/asm/string.h:59:9: note: previous definition is here #define memmove(dst, src, len) __memmove(dst, src, len) ^ arch/arm/boot/compressed/decompress.c:51:9: error: 'memcpy' macro redefined [-Werror,-Wmacro-redefined] #define memcpy memcpy ^ arch/arm/include/asm/string.h:58:9: note: previous definition is here #define memcpy(dst, src, len) __memcpy(dst, src, len) ^ Here we want the set of functions from the decompressor, so undefine the other macros before the override. Link: https://lore.kernel.org/linux-arm-kernel/CACRpkdZYJogU_SN3H9oeVq=zJkRgRT1gDz3xp59gdqWXxw-B=w@mail.gmail.com/ Link: https://lore.kernel.org/lkml/202105091112.F5rmd4By-lkp@intel.com/ Fixes: d6d51a96 ("ARM: 9014/2: Replace string mem* functions for KASan") Fixes: a7f464f3 ("ARM: 7001/2: Wire up support for the XZ decompressor") Reported-by:
kernel test robot <lkp@intel.com> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nick Desaulniers authored
commit e6a0c958 upstream. A kernel built with CONFIG_THUMB2_KERNEL=y and using clang as the assembler could generate non-naturally-aligned v7wbi_tlb_fns which results in a boot failure. The original commit adding the macro missed the .align directive on this data. Link: https://github.com/ClangBuiltLinux/linux/issues/1447 Link: https://lore.kernel.org/all/0699da7b-354f-aecc-a62f-e25693209af4@linaro.org/ Debugged-by:
Ard Biesheuvel <ardb@kernel.org> Debugged-by:
Nathan Chancellor <nathan@kernel.org> Debugged-by:
Richard Henderson <richard.henderson@linaro.org> Fixes: 66a625a8 ("ARM: mm: proc-macros: Add generic proc/cache/tlb struct definition macros") Suggested-by:
Ard Biesheuvel <ardb@kernel.org> Acked-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Tested-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- Oct 27, 2021
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20211025190937.555108060@linuxfoundation.org Tested-by:
Florian Fainelli <f.fainelli@gmail.com> Tested-by:
Linux Kernel Functional Testing <lkft@linaro.org> Tested-by:
Shuah Khan <skhan@linuxfoundation.org> Tested-by:
Sudip Mukherjee <sudip.mukherjee@codethink.co.uk> Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Fabien Dessenne authored
commit c370bb47 upstream. When resuming from low power, the driver attempts to restore the configuration of some pins. This is done by a call to: stm32_pinctrl_restore_gpio_regs(struct stm32_pinctrl *pctl, u32 pin) where 'pin' must be a valid pin value (i.e. matching some 'groups->pin'). Fix the current implementation which uses some wrong 'pin' value. Fixes: e2f3cf18 ("pinctrl: stm32: add suspend/resume management") Signed-off-by:
Fabien Dessenne <fabien.dessenne@foss.st.com> Link: https://lore.kernel.org/r/20211008122517.617633-1-fabien.dessenne@foss.st.com Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nick Desaulniers authored
commit 9d417cbe upstream. tglx notes: This function [futex_detect_cmpxchg] is only needed when an architecture has to runtime discover whether the CPU supports it or not. ARM has unconditional support for this, so the obvious thing to do is the below. Fixes linkage failure from Clang randconfigs: kernel/futex.o:(.text.fixup+0x5c): relocation truncated to fit: R_ARM_JUMP24 against `.init.text' and boot failures for CONFIG_THUMB2_KERNEL. Link: https://github.com/ClangBuiltLinux/linux/issues/325 Comments from Nick Desaulniers: See-also: 03b8c7b6 ("futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test") Reported-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
Nathan Chancellor <nathan@kernel.org> Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Thomas Gleixner <tglx@linutronix.de> Tested-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Cc: stable@vger.kernel.org # v3.14+ Reviewed-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Rostedt (VMware) authored
commit ed65df63 upstream. While writing an email explaining the "bit = 0" logic for a discussion on making ftrace_test_recursion_trylock() disable preemption, I discovered a path that makes the "not do the logic if bit is zero" unsafe. The recursion logic is done in hot paths like the function tracer. Thus, any code executed causes noticeable overhead. Thus, tricks are done to try to limit the amount of code executed. This included the recursion testing logic. Having recursion testing is important, as there are many paths that can end up in an infinite recursion cycle when tracing every function in the kernel. Thus protection is needed to prevent that from happening. Because it is OK to recurse due to different running context levels (e.g. an interrupt preempts a trace, and then a trace occurs in the interrupt handler), a set of bits are used to know which context one is in (normal, softirq, irq and NMI). If a recursion occurs in the same level, it is prevented*. Then there are infrastructure levels of recursion as well. When more than one callback is attached to the same function to trace, it calls a loop function to iterate over all the callbacks. Both the callbacks and the loop function have recursion protection. The callbacks use the "ftrace_test_recursion_trylock()" which has a "function" set of context bits to test, and the loop function calls the internal trace_test_and_set_recursion() directly, with an "internal" set of bits. If an architecture does not implement all the features supported by ftrace then the callbacks are never called directly, and the loop function is called instead, which will implement the features of ftrace. Since both the loop function and the callbacks do recursion protection, it was seemed unnecessary to do it in both locations. Thus, a trick was made to have the internal set of recursion bits at a more significant bit location than the function bits. Then, if any of the higher bits were set, the logic of the function bits could be skipped, as any new recursion would first have to go through the loop function. This is true for architectures that do not support all the ftrace features, because all functions being traced must first go through the loop function before going to the callbacks. But this is not true for architectures that support all the ftrace features. That's because the loop function could be called due to two callbacks attached to the same function, but then a recursion function inside the callback could be called that does not share any other callback, and it will be called directly. i.e. traced_function_1: [ more than one callback tracing it ] call loop_func loop_func: trace_recursion set internal bit call callback callback: trace_recursion [ skipped because internal bit is set, return 0 ] call traced_function_2 traced_function_2: [ only traced by above callback ] call callback callback: trace_recursion [ skipped because internal bit is set, return 0 ] call traced_function_2 [ wash, rinse, repeat, BOOM! out of shampoo! ] Thus, the "bit == 0 skip" trick is not safe, unless the loop function is call for all functions. Since we want to encourage architectures to implement all ftrace features, having them slow down due to this extra logic may encourage the maintainers to update to the latest ftrace features. And because this logic is only safe for them, remove it completely. [*] There is on layer of recursion that is allowed, and that is to allow for the transition between interrupt context (normal -> softirq -> irq -> NMI), because a trace may occur before the context update is visible to the trace recursion logic. Link: https://lore.kernel.org/all/609b565a-ed6e-a1da-f025-166691b5d994@linux.alibaba.com/ Link: https://lkml.kernel.org/r/20211018154412.09fcad3c@gandalf.local.home Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James E.J. Bottomley" <James.Bottomley@hansenpartnership.com> Cc: Helge Deller <deller@gmx.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Albert Ou <aou@eecs.berkeley.edu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Miroslav Benes <mbenes@suse.cz> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Colin Ian King <colin.king@canonical.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Jisheng Zhang <jszhang@kernel.org> Cc: =?utf-8?b?546L6LSH?= <yun.wang@linux.alibaba.com> Cc: Guo Ren <guoren@kernel.org> Cc: stable@vger.kernel.org Fixes: edc15caf ("tracing: Avoid unnecessary multiple recursion checks") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yanfei Xu authored
commit ab609f25 upstream. Once device_register() failed, we should call put_device() to decrement reference count for cleanup. Or it will cause memory leak. BUG: memory leak unreferenced object 0xffff888114032e00 (size 256): comm "kworker/1:3", pid 2960, jiffies 4294943572 (age 15.920s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 08 2e 03 14 81 88 ff ff ................ 08 2e 03 14 81 88 ff ff 90 76 65 82 ff ff ff ff .........ve..... backtrace: [<ffffffff8265cfab>] kmalloc include/linux/slab.h:591 [inline] [<ffffffff8265cfab>] kzalloc include/linux/slab.h:721 [inline] [<ffffffff8265cfab>] device_private_init drivers/base/core.c:3203 [inline] [<ffffffff8265cfab>] device_add+0x89b/0xdf0 drivers/base/core.c:3253 [<ffffffff828dd643>] __mdiobus_register+0xc3/0x450 drivers/net/phy/mdio_bus.c:537 [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline] [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline] [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969 [<ffffffff82660916>] bus_probe_device+0xc6/0xe0 drivers/base/bus.c:487 [<ffffffff8265cd0b>] device_add+0x5fb/0xdf0 drivers/base/core.c:3359 [<ffffffff82c343b9>] usb_set_configuration+0x9d9/0xb90 drivers/usb/core/message.c:2170 [<ffffffff82c4473c>] usb_generic_driver_probe+0x8c/0xc0 drivers/usb/core/generic.c:238 BUG: memory leak unreferenced object 0xffff888116f06900 (size 32): comm "kworker/0:2", pid 2670, jiffies 4294944448 (age 7.160s) hex dump (first 32 bytes): 75 73 62 2d 30 30 31 3a 30 30 33 00 00 00 00 00 usb-001:003..... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<ffffffff81484516>] kstrdup+0x36/0x70 mm/util.c:60 [<ffffffff814845a3>] kstrdup_const+0x53/0x80 mm/util.c:83 [<ffffffff82296ba2>] kvasprintf_const+0xc2/0x110 lib/kasprintf.c:48 [<ffffffff82358d4b>] kobject_set_name_vargs+0x3b/0xe0 lib/kobject.c:289 [<ffffffff826575f3>] dev_set_name+0x63/0x90 drivers/base/core.c:3147 [<ffffffff828dd63b>] __mdiobus_register+0xbb/0x450 drivers/net/phy/mdio_bus.c:535 [<ffffffff828cb835>] __devm_mdiobus_register+0x75/0xf0 drivers/net/phy/mdio_devres.c:87 [<ffffffff82b92a00>] ax88772_init_mdio drivers/net/usb/asix_devices.c:676 [inline] [<ffffffff82b92a00>] ax88772_bind+0x330/0x480 drivers/net/usb/asix_devices.c:786 [<ffffffff82baa33f>] usbnet_probe+0x3ff/0xdf0 drivers/net/usb/usbnet.c:1745 [<ffffffff82c36e17>] usb_probe_interface+0x177/0x370 drivers/usb/core/driver.c:396 [<ffffffff82661d17>] call_driver_probe drivers/base/dd.c:517 [inline] [<ffffffff82661d17>] really_probe.part.0+0xe7/0x380 drivers/base/dd.c:596 [<ffffffff826620bc>] really_probe drivers/base/dd.c:558 [inline] [<ffffffff826620bc>] __driver_probe_device+0x10c/0x1e0 drivers/base/dd.c:751 [<ffffffff826621ba>] driver_probe_device+0x2a/0x120 drivers/base/dd.c:781 [<ffffffff82662a26>] __device_attach_driver+0xf6/0x140 drivers/base/dd.c:898 [<ffffffff8265eca7>] bus_for_each_drv+0xb7/0x100 drivers/base/bus.c:427 [<ffffffff826625a2>] __device_attach+0x122/0x260 drivers/base/dd.c:969 Reported-by:
<syzbot+398e7dc692ddbbb4cfec@syzkaller.appspotmail.com> Signed-off-by:
Yanfei Xu <yanfei.xu@windriver.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dexuan Cui authored
commit 50b6cb35 upstream. After commit ea2f0f77 ("scsi: core: Cap scsi_host cmd_per_lun at can_queue"), a 416-CPU VM running on Hyper-V hangs during boot because the hv_storvsc driver sets scsi_driver.can_queue to an integer value that exceeds SHRT_MAX, and hence scsi_add_host_with_dma() sets shost->cmd_per_lun to a negative "short" value. Use min_t(int, ...) to work around the issue. Link: https://lore.kernel.org/r/20211008043546.6006-1-decui@microsoft.com Fixes: ea2f0f77 ("scsi: core: Cap scsi_host cmd_per_lun at can_queue") Cc: stable@vger.kernel.org Reviewed-by:
Haiyang Zhang <haiyangz@microsoft.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Uwe Kleine-König authored
[ Upstream commit d997cc17 ] On i.MX7S and i.MX8M* (but not i.MX6*) the pwrkey device has an associated clock. Accessing the registers requires that this clock is enabled. Binding the driver on at least i.MX7S and i.MX8MP while not having the clock enabled results in a complete hang of the machine. (This usually only happens if snvs_pwrkey is built as a module and the rtc-snvs driver isn't already bound because at bootup the required clk is on and only gets disabled when the clk framework disables unused clks late during boot.) This completes the fix in commit 135be16d ("ARM: dts: imx7s: add snvs clock to pwrkey"). Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20211013062848.2667192-1-u.kleine-koenig@pengutronix.de Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kai Vehmanen authored
[ Upstream commit b37a1518 ] The snd_hdac_bus_reset_link() contains logic to clear STATESTS register before performing controller reset. This code dates back to an old bugfix in commit e8a7f136 ("[ALSA] hda-intel - Improve HD-audio codec probing robustness"). Originally the code was added to azx_reset(). The code was moved around in commit a41d1224 ("ALSA: hda - Embed bus into controller object") and ended up to snd_hdac_bus_reset_link() and called primarily via snd_hdac_bus_init_chip(). The logic to clear STATESTS is correct when snd_hdac_bus_init_chip() is called when controller is not in reset. In this case, STATESTS can be cleared. This can be useful e.g. when forcing a controller reset to retry codec probe. A normal non-power-on reset will not clear the bits. However, this old logic is problematic when controller is already in reset. The HDA specification states that controller must be taken out of reset before writing to registers other than GCTL.CRST (1.0a spec, 3.3.7). The write to STATESTS in snd_hdac_bus_reset_link() will be lost if the controller is already in reset per the HDA specification mentioned. This has been harmless on older hardware. On newer generation of Intel PCIe based HDA controllers, if configured to report issues, this write will emit an unsupported request error. If ACPI Platform Error Interface (APEI) is enabled in kernel, this will end up to kernel log. Fix the code in snd_hdac_bus_reset_link() to only clear the STATESTS if the function is called when controller is not in reset. Otherwise clearing the bits is not possible and should be skipped. Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20211012142935.3731820-1-kai.vehmanen@linux.intel.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Prashant Malani authored
[ Upstream commit a0c5814b ] The comment decribing the IPC timeout hadn't been updated when the actual timeout was changed from 3 to 5 seconds in commit a7d53dbb ("platform/x86: intel_scu_ipc: Increase virtual timeout from 3 to 5 seconds") . Since the value is anyway updated to 10s now, take this opportunity to update the value in the comment too. Signed-off-by:
Prashant Malani <pmalani@chromium.org> Cc: Benson Leung <bleung@chromium.org> Reviewed-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Link: https://lore.kernel.org/r/20210928101932.2543937-4-pmalani@chromium.org Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zheyu Ma authored
[ Upstream commit 6510e80a ] The driver can call card->isac.release() function from an atomic context. Fix this by calling this function after releasing the lock. The following log reveals it: [ 44.168226 ] BUG: sleeping function called from invalid context at kernel/workqueue.c:3018 [ 44.168941 ] in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 5475, name: modprobe [ 44.169574 ] INFO: lockdep is turned off. [ 44.169899 ] irq event stamp: 0 [ 44.170160 ] hardirqs last enabled at (0): [<0000000000000000>] 0x0 [ 44.170627 ] hardirqs last disabled at (0): [<ffffffff814209ed>] copy_process+0x132d/0x3e00 [ 44.171240 ] softirqs last enabled at (0): [<ffffffff81420a1a>] copy_process+0x135a/0x3e00 [ 44.171852 ] softirqs last disabled at (0): [<0000000000000000>] 0x0 [ 44.172318 ] Preemption disabled at: [ 44.172320 ] [<ffffffffa009b0a9>] nj_release+0x69/0x500 [netjet] [ 44.174441 ] Call Trace: [ 44.174630 ] dump_stack_lvl+0xa8/0xd1 [ 44.174912 ] dump_stack+0x15/0x17 [ 44.175166 ] ___might_sleep+0x3a2/0x510 [ 44.175459 ] ? nj_release+0x69/0x500 [netjet] [ 44.175791 ] __might_sleep+0x82/0xe0 [ 44.176063 ] ? start_flush_work+0x20/0x7b0 [ 44.176375 ] start_flush_work+0x33/0x7b0 [ 44.176672 ] ? trace_irq_enable_rcuidle+0x85/0x170 [ 44.177034 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177372 ] ? kasan_quarantine_put+0xaa/0x1f0 [ 44.177711 ] __flush_work+0x11a/0x1a0 [ 44.177991 ] ? flush_work+0x20/0x20 [ 44.178257 ] ? lock_release+0x13c/0x8f0 [ 44.178550 ] ? __kasan_check_write+0x14/0x20 [ 44.178872 ] ? do_raw_spin_lock+0x148/0x360 [ 44.179187 ] ? read_lock_is_recursive+0x20/0x20 [ 44.179530 ] ? __kasan_check_read+0x11/0x20 [ 44.179846 ] ? do_raw_spin_unlock+0x55/0x900 [ 44.180168 ] ? ____kasan_slab_free+0x116/0x140 [ 44.180505 ] ? _raw_spin_unlock_irqrestore+0x41/0x60 [ 44.180878 ] ? skb_queue_purge+0x1a3/0x1c0 [ 44.181189 ] ? kfree+0x13e/0x290 [ 44.181438 ] flush_work+0x17/0x20 [ 44.181695 ] mISDN_freedchannel+0xe8/0x100 [ 44.182006 ] isac_release+0x210/0x260 [mISDNipac] [ 44.182366 ] nj_release+0xf6/0x500 [netjet] [ 44.182685 ] nj_remove+0x48/0x70 [netjet] [ 44.182989 ] pci_device_remove+0xa9/0x250 Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Herve Codina authored
[ Upstream commit 6636fec2 ] On SPEAr3xx, ethernet driver is not compatible with the SPEAr600 one. Indeed, SPEAr3xx uses an earlier version of this IP (v3.40) and needs some driver tuning compare to SPEAr600. The v3.40 IP support was added to stmmac driver and this patch fixes this issue and use the correct compatible string for SPEAr3xx Signed-off-by:
Herve Codina <herve.codina@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Herve Codina authored
[ Upstream commit 9cb1d19f ] dwmac 3.40a is an old ip version that can be found on SPEAr3xx soc. Signed-off-by:
Herve Codina <herve.codina@bootlin.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Filipe Manana authored
[ Upstream commit 77a5b9e3 ] Currently inode_in_dir() ignores errors returned from btrfs_lookup_dir_index_item() and from btrfs_lookup_dir_item(), treating any errors as if the directory entry does not exists in the fs/subvolume tree, which is obviously not correct, as we can get errors such as -EIO when reading extent buffers while searching the fs/subvolume's tree. Fix that by making inode_in_dir() return the errors and making its only caller, add_inode_ref(), deal with returned errors as well. Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Brendan Higgins authored
[ Upstream commit 554afc3b ] KUnit and structleak don't play nice, so add a makefile variable for enabling structleak when it complains. Co-developed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Brendan Higgins <brendanhiggins@google.com> Reviewed-by:
David Gow <davidgow@google.com> Signed-off-by:
Shuah Khan <skhan@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Florian Westphal authored
commit 3e6ed770 upstream. This should not be there. Fixes: 2de03b45 ("selftests: netfilter: add flowtable test script") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vegard Nossum authored
commit 77076934 upstream. This option, NF_CONNTRACK_SECMARK, is a bool, so it can never be 'm'. Fixes: 33b8e776 ("[NETFILTER]: Add CONFIG_NETFILTER_ADVANCED option") Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xiaolong Huang authored
commit 1f3e2e97 upstream. The cmtp_add_connection() would add a cmtp session to a controller and run a kernel thread to process cmtp. __module_get(THIS_MODULE); session->task = kthread_run(cmtp_session, session, "kcmtpd_ctr_%d", session->num); During this process, the kernel thread would call detach_capi_ctr() to detach a register controller. if the controller was not attached yet, detach_capi_ctr() would trigger an array-index-out-bounds bug. [ 46.866069][ T6479] UBSAN: array-index-out-of-bounds in drivers/isdn/capi/kcapi.c:483:21 [ 46.867196][ T6479] index -1 is out of range for type 'capi_ctr *[32]' [ 46.867982][ T6479] CPU: 1 PID: 6479 Comm: kcmtpd_ctr_0 Not tainted 5.15.0-rc2+ #8 [ 46.869002][ T6479] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014 [ 46.870107][ T6479] Call Trace: [ 46.870473][ T6479] dump_stack_lvl+0x57/0x7d [ 46.870974][ T6479] ubsan_epilogue+0x5/0x40 [ 46.871458][ T6479] __ubsan_handle_out_of_bounds.cold+0x43/0x48 [ 46.872135][ T6479] detach_capi_ctr+0x64/0xc0 [ 46.872639][ T6479] cmtp_session+0x5c8/0x5d0 [ 46.873131][ T6479] ? __init_waitqueue_head+0x60/0x60 [ 46.873712][ T6479] ? cmtp_add_msgpart+0x120/0x120 [ 46.874256][ T6479] kthread+0x147/0x170 [ 46.874709][ T6479] ? set_kthread_struct+0x40/0x40 [ 46.875248][ T6479] ret_from_fork+0x1f/0x30 [ 46.875773][ T6479] Signed-off-by:
Xiaolong Huang <butterflyhuangxx@gmail.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211008065830.305057-1-butterflyhuangxx@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lin Ma authored
commit 1b1499a8 upstream. The nci_core_conn_close_rsp_packet() function will release the conn_info with given conn_id. However, it needs to set the rf_conn_info to NULL to prevent other routines like nci_rf_intf_activated_ntf_packet() to trigger the UAF. Reviewed-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
Lin Ma <linma@zju.edu.cn> Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaohe Lin authored
commit 9037c576 upstream. In error path, the random_seq of slub cache might be leaked. Fix this by using __kmem_cache_release() to release all the relevant resources. Link: https://lkml.kernel.org/r/20210916123920.48704-4-linmiaohe@huawei.com Fixes: 210e7a43 ("mm: SLUB freelist randomization") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Reviewed-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Faiyaz Mohammed <faiyazm@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Miaohe Lin authored
commit 899447f6 upstream. If object's reuse is delayed, it will be excluded from the reconstructed freelist. But we forgot to adjust the cnt accordingly. So there will be a mismatch between reconstructed freelist depth and cnt. This will lead to free_debug_processing() complaining about freelist count or a incorrect slub inuse count. Link: https://lkml.kernel.org/r/20210916123920.48704-3-linmiaohe@huawei.com Fixes: c3895391 ("kasan, slub: fix handling of kasan_slab_free hook") Signed-off-by:
Miaohe Lin <linmiaohe@huawei.com> Reviewed-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Bharata B Rao <bharata@linux.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Faiyaz Mohammed <faiyazm@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Kees Cook <keescook@chromium.org> Cc: Pekka Enberg <penberg@kernel.org> Cc: Roman Gushchin <guro@fb.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Ellerman authored
commit 496c5fe2 upstream. In isa206_idle_insn_mayloss() we store various registers into the stack red zone, which is allowed. However inside the IDLE_STATE_ENTER_SEQ_NORET macro we save r2 again, to 0(r1), which corrupts the stack back chain. We used to do the same in isa206_idle_insn_mayloss() itself, but we fixed that in 73287caa ("powerpc64/idle: Fix SP offsets when saving GPRs"), however we missed that the macro also corrupts the back chain. Corrupting the back chain is bad for debuggability but doesn't necessarily cause a bug. However we recently changed the stack handling in some KVM code, and it now relies on the stack back chain being valid when it returns. The corruption causes that code to return with r1 pointing somewhere in kernel data, at some point LR is restored from the stack and we branch to NULL or somewhere else invalid. Only affects Power8 hosts running KVM guests, with dynamic_mt_modes enabled (which it is by default). The fixes tag below points to the commit that changed the KVM stack handling, exposing this bug. The actual corruption of the back chain has always existed since 948cf67c ("powerpc: Add NAP mode support on Power7 in HV mode"). Fixes: 9b4416c5 ("KVM: PPC: Book3S HV: Fix stack handling in idle_kvm_start_guest()") Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211020094826.3222052-1-mpe@ellerman.id.au Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Ellerman authored
commit cdeb5d7d upstream. We call idle_kvm_start_guest() from power7_offline() if the thread has been requested to enter KVM. We pass it the SRR1 value that was returned from power7_idle_insn() which tells us what sort of wakeup we're processing. Depending on the SRR1 value we pass in, the KVM code might enter the guest, or it might return to us to do some host action if the wakeup requires it. If idle_kvm_start_guest() is able to handle the wakeup, and enter the guest it is supposed to indicate that by returning a zero SRR1 value to us. That was the behaviour prior to commit 10d91611 ("powerpc/64s: Reimplement book3s idle code in C"), however in that commit the handling of SRR1 was reworked, and the zeroing behaviour was lost. Returning from idle_kvm_start_guest() without zeroing the SRR1 value can confuse the host offline code, causing the guest to crash and other weirdness. Fixes: 10d91611 ("powerpc/64s: Reimplement book3s idle code in C") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211015133929.832061-2-mpe@ellerman.id.au Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Ellerman authored
commit 9b4416c5 upstream. In commit 10d91611 ("powerpc/64s: Reimplement book3s idle code in C") kvm_start_guest() became idle_kvm_start_guest(). The old code allocated a stack frame on the emergency stack, but didn't use the frame to store anything, and also didn't store anything in its caller's frame. idle_kvm_start_guest() on the other hand is written more like a normal C function, it creates a frame on entry, and also stores CR/LR into its callers frame (per the ABI). The problem is that there is no caller frame on the emergency stack. The emergency stack for a given CPU is allocated with: paca_ptrs[i]->emergency_sp = alloc_stack(limit, i) + THREAD_SIZE; So emergency_sp actually points to the first address above the emergency stack allocation for a given CPU, we must not store above it without first decrementing it to create a frame. This is different to the regular kernel stack, paca->kstack, which is initialised to point at an initial frame that is ready to use. idle_kvm_start_guest() stores the backchain, CR and LR all of which write outside the allocation for the emergency stack. It then creates a stack frame and saves the non-volatile registers. Unfortunately the frame it creates is not large enough to fit the non-volatiles, and so the saving of the non-volatile registers also writes outside the emergency stack allocation. The end result is that we corrupt whatever is at 0-24 bytes, and 112-248 bytes above the emergency stack allocation. In practice this has gone unnoticed because the memory immediately above the emergency stack happens to be used for other stack allocations, either another CPUs mc_emergency_sp or an IRQ stack. See the order of calls to irqstack_early_init() and emergency_stack_init(). The low addresses of another stack are the top of that stack, and so are only used if that stack is under extreme pressue, which essentially never happens in practice - and if it did there's a high likelyhood we'd crash due to that stack overflowing. Still, we shouldn't be corrupting someone else's stack, and it is purely luck that we aren't corrupting something else. To fix it we save CR/LR into the caller's frame using the existing r1 on entry, we then create a SWITCH_FRAME_SIZE frame (which has space for pt_regs) on the emergency stack with the backchain pointing to the existing stack, and then finally we switch to the new frame on the emergency stack. Fixes: 10d91611 ("powerpc/64s: Reimplement book3s idle code in C") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20211015133929.832061-1-mpe@ellerman.id.au Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christopher M. Riedl authored
commit 73287caa upstream. The idle entry/exit code saves/restores GPRs in the stack "red zone" (Protected Zone according to PowerPC64 ELF ABI v2). However, the offset used for the first GPR is incorrect and overwrites the back chain - the Protected Zone actually starts below the current SP. In practice this is probably not an issue, but it's still incorrect so fix it. Also expand the comments to explain why using the stack "red zone" instead of creating a new stackframe is appropriate here. Signed-off-by:
Christopher M. Riedl <cmr@codefail.de> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210206072342.5067-1-cmr@codefail.de Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gaosheng Cui authored
commit 6e3ee990 upstream. Fix possible null-pointer dereference in audit_filter_rules. audit_filter_rules() error: we previously assumed 'ctx' could be null Cc: stable@vger.kernel.org Fixes: bf361231 ("audit: add saddr_fam filter field") Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Takashi Iwai authored
commit 5af82c81 upstream. The put callback of a kcontrol is supposed to return 1 when the value is changed, and this will be notified to user-space. However, some DAPM kcontrols always return 0 (except for errors), hence the user-space misses the update of a control value. This patch corrects the behavior by properly returning 1 when the value gets updated. Reported-and-tested-by:
Hans de Goede <hdegoede@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20211006141712.2439-1-tiwai@suse.de Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Steven Clarkson authored
commit aef454b4 upstream. Apply existing PCI quirk to the Clevo PC50HS and related models to fix audio output on the built in speakers. Signed-off-by:
Steven Clarkson <sc@lambdal.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211014133554.1326741-1-sc@lambdal.com Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Brendan Grieve authored
commit 3c414eb6 upstream. As per discussion at: https://github.com/szszoke/sennheiser-gsp670-pulseaudio-profile/issues/13 The GSP670 has 2 playback and 1 recording device that by default are detected in an incompatible order for alsa. This may have been done to make it compatible for the console by the manufacturer and only affects the latest firmware which uses its own ID. This quirk will resolve this by reordering the channels. Signed-off-by:
Brendan Grieve <brendan@grieve.com.au> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20211015025335.196592-1-brendan@grieve.com.au Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthew Wilcox (Oracle) authored
commit 032146cd upstream. If we open a file without read access and then pass the fd to a syscall whose implementation calls kernel_read_file_from_fd(), we get a warning from __kernel_read(): if (WARN_ON_ONCE(!(file->f_mode & FMODE_READ))) This currently affects both finit_module() and kexec_file_load(), but it could affect other syscalls in the future. Link: https://lkml.kernel.org/r/20211007220110.600005-1-willy@infradead.org Fixes: b844f0ec ("vfs: define kernel_copy_file_from_fd()") Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Reported-by:
Hao Sun <sunhao.th@gmail.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Acked-by:
Christian Brauner <christian.brauner@ubuntu.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Mimi Zohar <zohar@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lukas Bulwahn authored
commit b0e90128 upstream. Commit 6e7b64b9 ("elfcore: fix building with clang") introduces special handling for two architectures, ia64 and User Mode Linux. However, the wrong name, i.e., CONFIG_UM, for the intended Kconfig symbol for User-Mode Linux was used. Although the directory for User Mode Linux is ./arch/um; the Kconfig symbol for this architecture is called CONFIG_UML. Luckily, ./scripts/checkkconfigsymbols.py warns on non-existing configs: UM Referencing files: include/linux/elfcore.h Similar symbols: UML, NUMA Correct the name of the config to the intended one. [akpm@linux-foundation.org: fix um/x86_64, per Catalin] Link: https://lkml.kernel.org/r/20211006181119.2851441-1-catalin.marinas@arm.com Link: https://lkml.kernel.org/r/YV6pejGzLy5ppEpt@arm.com Link: https://lkml.kernel.org/r/20211006082209.417-1-lukas.bulwahn@gmail.com Fixes: 6e7b64b9 ("elfcore: fix building with clang") Signed-off-by:
Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Barret Rhoden <brho@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Valentin Vidic authored
commit b15fa922 upstream. Starting with kernel 5.11 built with CONFIG_FORTIFY_SOURCE mouting an ocfs2 filesystem with either o2cb or pcmk cluster stack fails with the trace below. Problem seems to be that strings for cluster stack and cluster name are not guaranteed to be null terminated in the disk representation, while strlcpy assumes that the source string is always null terminated. This causes a read outside of the source string triggering the buffer overflow detection. detected buffer overflow in strlen ------------[ cut here ]------------ kernel BUG at lib/string.c:1149! invalid opcode: 0000 [#1] SMP PTI CPU: 1 PID: 910 Comm: mount.ocfs2 Not tainted 5.14.0-1-amd64 #1 Debian 5.14.6-2 RIP: 0010:fortify_panic+0xf/0x11 ... Call Trace: ocfs2_initialize_super.isra.0.cold+0xc/0x18 [ocfs2] ocfs2_fill_super+0x359/0x19b0 [ocfs2] mount_bdev+0x185/0x1b0 legacy_get_tree+0x27/0x40 vfs_get_tree+0x25/0xb0 path_mount+0x454/0xa20 __x64_sys_mount+0x103/0x140 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae Link: https://lkml.kernel.org/r/20210929180654.32460-1-vvidic@valentin-vidic.from.hr Signed-off-by:
Valentin Vidic <vvidic@valentin-vidic.from.hr> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jan Kara authored
commit 5314454e upstream. Commit 6dbf7bb5 ("fs: Don't invalidate page buffers in block_write_full_page()") uncovered a latent bug in ocfs2 conversion from inline inode format to a normal inode format. The code in ocfs2_convert_inline_data_to_extents() attempts to zero out the whole cluster allocated for file data by grabbing, zeroing, and dirtying all pages covering this cluster. However these pages are beyond i_size, thus writeback code generally ignores these dirty pages and no blocks were ever actually zeroed on the disk. This oversight was fixed by commit 693c241a ("ocfs2: No need to zero pages past i_size.") for standard ocfs2 write path, inline conversion path was apparently forgotten; the commit log also has a reasoning why the zeroing actually is not needed. After commit 6dbf7bb5, things became worse as writeback code stopped invalidating buffers on pages beyond i_size and thus these pages end up with clean PageDirty bit but with buffers attached to these pages being still dirty. So when a file is converted from inline format, then writeback triggers, and then the file is grown so that these pages become valid, the invalid dirtiness state is preserved, mark_buffer_dirty() does nothing on these pages (buffers are already dirty) but page is never written back because it is clean. So data written to these pages is lost once pages are reclaimed. Simple reproducer for the problem is: xfs_io -f -c "pwrite 0 2000" -c "pwrite 2000 2000" -c "fsync" \ -c "pwrite 4000 2000" ocfs2_file After unmounting and mounting the fs again, you can observe that end of 'ocfs2_file' has lost its contents. Fix the problem by not doing the pointless zeroing during conversion from inline format similarly as in the standard write path. [akpm@linux-foundation.org: fix whitespace, per Joseph] Link: https://lkml.kernel.org/r/20210930095405.21433-1-jack@suse.cz Fixes: 6dbf7bb5 ("fs: Don't invalidate page buffers in block_write_full_page()") Signed-off-by:
Jan Kara <jack@suse.cz> Reviewed-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Tested-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by:
Gang He <ghe@suse.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: "Markov, Andrey" <Markov.Andrey@Dell.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jeff Layton authored
commit 1bd85aa6 upstream. Currently, we check the wb_err too early for directories, before all of the unsafe child requests have been waited on. In order to fix that we need to check the mapping->wb_err later nearer to the end of ceph_fsync. We also have an overly-complex method for tracking errors after blocklisting. The errors recorded in cleanup_session_requests go to a completely separate field in the inode, but we end up reporting them the same way we would for any other error (in fsync). There's no real benefit to tracking these errors in two different places, since the only reporting mechanism for them is in fsync, and we'd need to advance them both every time. Given that, we can just remove i_meta_err, and convert the places that used it to instead just use mapping->wb_err instead. That also fixes the original problem by ensuring that we do a check_and_advance of the wb_err at the end of the fsync op. Cc: stable@vger.kernel.org URL: https://tracker.ceph.com/issues/52864 Reported-by:
Patrick Donnelly <pdonnell@redhat.com> Signed-off-by:
Jeff Layton <jlayton@kernel.org> Reviewed-by:
Xiubo Li <xiubli@redhat.com> Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-