In order to decouple ethtool from its PHY library dependency, define an
ethtool_phy_ops singleton which can be overriden by the PHY library when
it loads with an appropriate set of function pointers.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix table formatting to eliminate warnings.

Documentation/networking/ethtool-netlink.rst:509: WARNING: Malformed table.
Documentation/networking/ethtool-netlink.rst:522: WARNING: Malformed table.
Documentation/networking/ethtool-netlink.rst:543: WARNING: Malformed table.
Documentation/networking/ethtool-netlink.rst:555: WARNING: Malformed table.
Documentation/networking/ethtool-netlink.rst:591: WARNING: Malformed table.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If phylib is built as a module and CONFIG_MDIO_DEVICE is 'y', the
mdio_device and mdio_bus code will be in the phylib module, not in the
kernel image. Meanwhile we build mdio_devres depending on the
CONFIG_MDIO_DEVICE symbol, so if it's 'y', it will go into the kernel
and we'll hit the following linker error:

   ld: drivers/net/phy/mdio_devres.o: in function `devm_mdiobus_alloc_size':
>> drivers/net/phy/mdio_devres.c:38: undefined reference to `mdiobus_alloc_size'
   ld: drivers/net/phy/mdio_devres.o: in function `devm_mdiobus_free':
>> drivers/net/phy/mdio_devres.c:16: undefined reference to `mdiobus_free'
   ld: drivers/net/phy/mdio_devres.o: in function `__devm_mdiobus_register':
>> drivers/net/phy/mdio_devres.c:87: undefined reference to `__mdiobus_register'
   ld: drivers/net/phy/mdio_devres.o: in function `devm_mdiobus_unregister':
>> drivers/net/phy/mdio_devres.c:53: undefined reference to `mdiobus_unregister'
   ld: drivers/net/phy/mdio_devres.o: in function `devm_of_mdiobus_register':
>> drivers/net/phy/mdio_devres.c:120: undefined reference to `of_mdiobus_register'

Add a hidden Kconfig option for MDIO_DEVRES which will be currently
selected by CONFIG_PHYLIB as there are no non-phylib users of these
helpers.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: ac3a68d5

 ("net: phy: don't abuse devres in devm_mdiobus_register()")
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vaibhav Gupta says:

====================
smsc: use generic power management

Linux Kernel Mentee: Remove Legacy Power Management.

The purpose of this patch series is to remove legacy power management callbacks
from smsc ethernet drivers.

The callbacks performing suspend() and resume() operations are still calling
pci_save_state(), pci_set_power_state(), etc. and handling the power management
themselves, which is not recommended.

The conversion requires the removal of the those function calls and change the
callback definition accordingly and make use of dev_pm_ops structure.

All patches are compile-tested only.

V2: Kbuild in V1, warning: variable 'err' is used uninitialized whenever 'if'
conditio is false in funcution .resume() .
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves. This driver was
handling them with the help of PCI helper functions.

With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Drivers should not use legacy power management as they have to manage power
states and related operations, for the device, themselves.

With generic PM, all essentials will be handled by the PCI core. Driver
needs to do only device-specific operations.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

priv->page_pool is an array, so comparing against it will always return true.
Do a meaningful check by checking priv->page_pool[0] instead.
While at it, clear the page_pool pointers on deallocation, or when an
allocation error happens during init.

Reported-by: Colin Ian King <colin.king@canonical.com>
Fixes: c2d6fe61

 ("mvpp2: XDP TX support")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We can re-use the existing work queue to handle path management
instead of a dedicated work queue.  Just move pm_worker to protocol.c,
call it from the mptcp worker and get rid of the msk lock (already held).

Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In certain configurations without power management support, gcc report
the following warning:

drivers/net/ethernet/sun/cassini.c:5206:12: warning:
 'cas_resume' defined but not used [-Wunused-function]
 5206 | static int cas_resume(struct device *dev_d)
      |            ^~~~~~~~~~

Mark cas_resume() as __maybe_unused to make it clear.

Fixes: f193f4eb

 ("sun/cassini: use generic power management")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The upgraded .suspend() and .resume() throw
"defined but not used [-Wunused-function]" warning for certain
configurations.

Mark them with "__maybe_unused" attribute.

Compile-tested only.

Fixes: b0db0cc2

 ("sun/niu: use generic power management")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
drivers/net/phy C=1 W=1 fixes

This fixes most of the Sparse and W=1 warnings in drivers/net/phy. The
Cavium code is still not fully clean, but it might actually be the
strange code is confusing Sparse.

v2
--
Added RB, TB, AB.
s/case/cause
Reverse Christmas tree
Module soft dependencies
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

To ensure that the octeon MDIO driver has been loaded, the Cavium
ethernet drivers reference a dummy symbol in the MDIO driver. This
forces it to be loaded first. And this symbol has not been cleanly
implemented, resulting in warnings when build W=1 C=1.

Since device tree is being used, and a phandle points to the PHY on
the MDIO bus, we can make use of deferred probing. If the PHY fails to
connect, it should be because the MDIO bus driver has not loaded
yet. Return -EPROBE_DEFER so it will be tried again later.

Additionally, add a MODULE_SOFTDEP() to give user space a hint as to
what order it should load the modules.

v2:
s/octoen/octeon/
Add MODULE_SOFTDEP()

Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: Robert Richter <rrichter@marvell.com>
Cc: Chris Packham <chris.packham@alliedtelesis.co.nz>
Tested-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

The MIPS low level register access functions seem to be missing
__iomem annotation. This causes lots of sparse warnings, when code
casts off the __iomem. Make the Cavium MDIO drivers cleaner by pushing
the casts lower down into the helpers, allow the drivers to work as
normal, with __iomem.

bus->register_base is now an void *, rather than a u64. So forming the
mii_bus->id string cannot use %llx any more. Use %px, so this kernel
address is still exposed to user space, as it was before.

v2: s/cases/causes/g

Cc: Sunil Goutham <sgoutham@marvell.com>
Cc: Robert Richter <rrichter@marvell.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

ntohs() expects to be passed a __be16. Correct the type of the
variable holding the sequence ID.

Cc: Richard Cochran <richardcochran@gmail.com>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

This array is not used outside of phy_device.c, so make it static.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Avoid the W=1 warning that symbol 'genphy_c45_driver' was not
declared. Should it be static?

Declare it on the phy header file.

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Correct the kerneldoc for a few structure and function calls,
as reported by C=1 W=1.

Cc: Alexandru Ardelean <alexaundru.ardelean@analog.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

By placing the GENMASK value into an unsigned int and then passing it
to PREF_FIELD, the type is reduces down from ULL. Given the reduced
size of the type, the range checks in PREP_FAIL() are always true, and
-Wtype-limits then gives a warning.

By skipping the intermediate variable, the warning can be avoided.

Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dynamically generate a unique GPIO interrupt name, based on the
device name and the GPIO name.  For example:

103:          0   sx1503q  12 Edge      sff2-los
104:          0   sx1503q  13 Edge      sff2-tx-fault

The sffX indicates the SFP the los and tx-fault are associated with.

v3:
- reverse Christmas tree new variable
- fix spaces vs tabs
v2:
- added net-next to PATCH part of subject line
- switched to devm_kasprintf()

Signed-off-by: Chris Healy <cphealy@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The recent change by commit 8d7aab35 ("ice: implement snapshot for
device capabilities") to implement the device-caps region for the ice
driver forgot to document it.

Add documentation to the ice devlink documentation file describing the
new region and add some sample output to the shell commands provided as
an example.

Fixes: 8d7aab35

 ("ice: implement snapshot for device capabilities")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

SYSTEMPORT is capable of performing VLAN transmit acceleration, support
that by configuring it appropriately, providing the VLAN ID and PCP/DEI
where necessary.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzkaller was able to make the kernel reach subflow_data_ready() for a
server subflow that was closed before subflow_finish_connect() completed.
In these cases we can avoid using the path for regular/fallback MPTCP
data, and just wake the main socket, to avoid the following warning:

 WARNING: CPU: 0 PID: 9370 at net/mptcp/subflow.c:885
 subflow_data_ready+0x1e6/0x290 net/mptcp/subflow.c:885
 Kernel panic - not syncing: panic_on_warn set ...
 CPU: 0 PID: 9370 Comm: syz-executor.0 Not tainted 5.7.0 #106
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
 rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
 Call Trace:
  <IRQ>
  __dump_stack lib/dump_stack.c:77 [inline]
  dump_stack+0xb7/0xfe lib/dump_stack.c:118
  panic+0x29e/0x692 kernel/panic.c:221
  __warn.cold+0x2f/0x3d kernel/panic.c:582
  report_bug+0x28b/0x2f0 lib/bug.c:195
  fixup_bug arch/x86/kernel/traps.c:105 [inline]
  fixup_bug arch/x86/kernel/traps.c:100 [inline]
  do_error_trap+0x10f/0x180 arch/x86/kernel/traps.c:197
  do_invalid_op+0x32/0x40 arch/x86/kernel/traps.c:216
  invalid_op+0x1e/0x30 arch/x86/entry/entry_64.S:1027
 RIP: 0010:subflow_data_ready+0x1e6/0x290 net/mptcp/subflow.c:885
 Code: 04 02 84 c0 74 06 0f 8e 91 00 00 00 41 0f b6 5e 48 31 ff 83 e3 18
 89 de e8 37 ec 3d fe 84 db 0f 85 65 ff ff ff e8 fa ea 3d fe <0f> 0b e9
 59 ff ff ff e8 ee ea 3d fe 48 89 ee 4c 89 ef e8 f3 77 ff
 RSP: 0018:ffff88811b2099b0 EFLAGS: 00010206
 RAX: ffff888111197000 RBX: 0000000000000000 RCX: ffffffff82fbc609
 RDX: 0000000000000100 RSI: ffffffff82fbc616 RDI: 0000000000000001
 RBP: ffff8881111bc800 R08: ffff888111197000 R09: ffffed10222a82af
 R10: ffff888111541577 R11: ffffed10222a82ae R12: 1ffff11023641336
 R13: ffff888111541000 R14: ffff88810fd4ca00 R15: ffff888111541570
  tcp_child_process+0x754/0x920 net/ipv4/tcp_minisocks.c:841
  tcp_v4_do_rcv+0x749/0x8b0 net/ipv4/tcp_ipv4.c:1642
  tcp_v4_rcv+0x2666/0x2e60 net/ipv4/tcp_ipv4.c:1999
  ip_protocol_deliver_rcu+0x29/0x1f0 net/ipv4/ip_input.c:204
  ip_local_deliver_finish net/ipv4/ip_input.c:231 [inline]
  NF_HOOK include/linux/netfilter.h:421 [inline]
  ip_local_deliver+0x2da/0x390 net/ipv4/ip_input.c:252
  dst_input include/net/dst.h:441 [inline]
  ip_rcv_finish net/ipv4/ip_input.c:428 [inline]
  ip_rcv_finish net/ipv4/ip_input.c:414 [inline]
  NF_HOOK include/linux/netfilter.h:421 [inline]
  ip_rcv+0xef/0x140 net/ipv4/ip_input.c:539
  __netif_receive_skb_one_core+0x197/0x1e0 net/core/dev.c:5268
  __netif_receive_skb+0x27/0x1c0 net/core/dev.c:5382
  process_backlog+0x1e5/0x6d0 net/core/dev.c:6226
  napi_poll net/core/dev.c:6671 [inline]
  net_rx_action+0x3e3/0xd70 net/core/dev.c:6739
  __do_softirq+0x18c/0x634 kernel/softirq.c:292
  do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082
  </IRQ>
  do_softirq.part.0+0x26/0x30 kernel/softirq.c:337
  do_softirq arch/x86/include/asm/preempt.h:26 [inline]
  __local_bh_enable_ip+0x46/0x50 kernel/softirq.c:189
  local_bh_enable include/linux/bottom_half.h:32 [inline]
  rcu_read_unlock_bh include/linux/rcupdate.h:723 [inline]
  ip_finish_output2+0x78a/0x19c0 net/ipv4/ip_output.c:229
  __ip_finish_output+0x471/0x720 net/ipv4/ip_output.c:306
  dst_output include/net/dst.h:435 [inline]
  ip_local_out+0x181/0x1e0 net/ipv4/ip_output.c:125
  __ip_queue_xmit+0x7a1/0x14e0 net/ipv4/ip_output.c:530
  __tcp_transmit_skb+0x19dc/0x35e0 net/ipv4/tcp_output.c:1238
  __tcp_send_ack.part.0+0x3c2/0x5b0 net/ipv4/tcp_output.c:3785
  __tcp_send_ack net/ipv4/tcp_output.c:3791 [inline]
  tcp_send_ack+0x7d/0xa0 net/ipv4/tcp_output.c:3791
  tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6040 [inline]
  tcp_rcv_state_process+0x36a4/0x49c2 net/ipv4/tcp_input.c:6209
  tcp_v4_do_rcv+0x343/0x8b0 net/ipv4/tcp_ipv4.c:1651
  sk_backlog_rcv include/net/sock.h:996 [inline]
  __release_sock+0x1ad/0x310 net/core/sock.c:2548
  release_sock+0x54/0x1a0 net/core/sock.c:3064
  inet_wait_for_connect net/ipv4/af_inet.c:594 [inline]
  __inet_stream_connect+0x57e/0xd50 net/ipv4/af_inet.c:686
  inet_stream_connect+0x53/0xa0 net/ipv4/af_inet.c:725
  mptcp_stream_connect+0x171/0x5f0 net/mptcp/protocol.c:1920
  __sys_connect_file net/socket.c:1854 [inline]
  __sys_connect+0x267/0x2f0 net/socket.c:1871
  __do_sys_connect net/socket.c:1882 [inline]
  __se_sys_connect net/socket.c:1879 [inline]
  __x64_sys_connect+0x6f/0xb0 net/socket.c:1879
  do_syscall_64+0xb7/0x3d0 arch/x86/entry/common.c:295
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7fb577d06469
 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89
 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01
 f0 ff ff 73 01 c3 48 8b 0d ff 49 2b 00 f7 d8 64 89 01 48
 RSP: 002b:00007fb5783d5dd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
 RAX: ffffffffffffffda RBX: 000000000068bfa0 RCX: 00007fb577d06469
 RDX: 000000000000004d RSI: 0000000020000040 RDI: 0000000000000003
 RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
 R13: 000000000041427c R14: 00007fb5783d65c0 R15: 0000000000000003

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/39


Reported-by: Christoph Paasch <cpaasch@apple.com>
Fixes: e1ff9e82

 ("net: mptcp: improve fallback to TCP")
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.

Deterministic algorithm:
For each file:
  If not .svg:
    For each line:
      If doesn't contain `\bxmlns\b`:
        For each link, `\bhttp://[^#

 \t\r\n]*(?:\w|/)`:
          If both the HTTP and HTTPS versions
          return 200 OK and serve the same content:
            Replace HTTP with HTTPS.

Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexander Lobakin says:

====================
net: qed/qede: W=1 C=1 warnings cleanup

This set cleans qed/qede build log under W=1 C=1 with GCC 8 and
sparse 0.6.2. The only thing left is "context imbalance -- unexpected
unlock" in one of the source files, which will be issued later during
the refactoring cycles.

The biggest part is handling the endianness warnings. The current code
often just assumes that both host and device operate in LE, which is
obviously incorrect (despite the fact that it's true for x86 platforms),
and makes sparse {s,m}ad.

The rest of the series is mostly random non-functional fixes
here-and-there.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Flow Dissector's keys are mostly Network / Big Endian. U{16,32}_MAX are
the same in either of byteorders, but let's make sparse happy with
wrapping them into noops.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

One of the function arguments was renamed some time ago, but this
wasn't reflected in its kernel-doc comment.
Also add the description for return values.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current code assumes that both host and device operates in Little Endian
in lots of places. While this is true for x86 platform, this doesn't mean
we should not care about this.

This commit addresses all parts of the code that were pointed out by sparse
checker. All operations with restricted (__be*/__le*) types are now
protected with explicit from/to CPU conversions, even if they're noops on
common setups.

I'm sure there are more such places, but this implies a deeper code
investigation, and is a subject for future works.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Use intermediate pointers instead of multiple dereferencing to
simplify and beautify parts of code that will be addressed in
the next commit.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To not mix functional and stylistic changes, correct indentation
of code that will be modified in the subsequent commits.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Get rid of the kernel-doc warnings when building with W=1+ by
rewriting the problematic doc comments according to the
recommended format and style.

Note that this only fixes problems found in C source files,
headers aren't in scope for now.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change the prototype of qed_hw_err_notify() with the following:
* constify "fmt" argument according to printk() declarations;
* anontate it with __cold attribute to move the function out of
  the line;
* annotate it with __printf() attribute;

This eliminates W=1+ warning:

drivers/net/ethernet/qlogic/qed/qed_hw.c: In function
‘qed_hw_err_notify’:
drivers/net/ethernet/qlogic/qed/qed_hw.c:851:3: warning: function
‘qed_hw_err_notify’ might be a candidate for ‘gnu_printf’ format
attribute [-Wsuggest-attribute=format]
 len = vsnprintf(buf, QED_HW_ERR_MAX_STR_SIZE, fmt, vl);
 ^~~

as well as saves some code size:

add/remove: 0/0 grow/shrink: 2/4 up/down: 40/-125 (-85)
Function                                     old     new   delta
qed_dmae_execute_command                    1680    1711     +31
qed_spq_post                                1104    1113      +9
qed_int_sp_dpc                              3554    3545      -9
qed_mcp_cmd_and_union                       1896    1876     -20
qed_hw_err_notify                            395     352     -43
qed_mcp_handle_events                       2630    2577     -53
Total: Before=368645, After=368560, chg -0.02%

__printf() will also be helpful with catching bad format strings
and arguments.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Fix several sparse warnings by moving structs declarations into
the corresponding header files:

drivers/net/ethernet/qlogic/qed/qed_dcbx.c:2402:32: warning:
symbol 'qed_dcbnl_ops_pass' was not declared. Should it be static?

drivers/net/ethernet/qlogic/qed/qed_ll2.c:2754:26: warning: symbol
'qed_ll2_ops_pass' was not declared. Should it be static?

drivers/net/ethernet/qlogic/qed/qed_ptp.c:449:30: warning: symbol
'qed_ptp_ops_pass' was not declared. Should it be static?

drivers/net/ethernet/qlogic/qed/qed_sriov.c:5265:29: warning:
symbol 'qed_iov_ops_pass' was not declared. Should it be static?

(some of them were declared twice in different header files)

Also make qed_hw_err_type_descr[] const while at it.

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Static variables (and functions, unless they're inline) should not
be declared in header files.
Move the static array iro_arr[] from "qed_hsi.h" to the sole place
where it's used, "qed_init_ops.c". This eliminates lots of warnings
(42 of them actually) against W=1+:

In file included from drivers/net/ethernet/qlogic/qed/qed.h:51:0,
                 from drivers/net/ethernet/qlogic/qed/qed_ooo.c:40:
drivers/net/ethernet/qlogic/qed/qed_hsi.h:4421:18: warning: 'iro_arr'
defined but not used [-Wunused-const-variable=]
 static const u32 iro_arr[] = {
                  ^~~~~~~

Signed-off-by: Alexander Lobakin <alobakin@marvell.com>
Signed-off-by: Igor Russkikh <irusskikh@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch adds a new structure geneve_config and moves the per-device
configuration attributes to it, like we already have in VXLAN with
struct vxlan_config. This ends up being pretty invasive since those
attributes are used everywhere.

This allows us to clean up the argument lists for geneve_configure (4
arguments instead of 8) and geneve_nl2info (5 instead of 9).

This also reduces the copy-paste of code setting those attributes
between geneve_configure and geneve_changelink to a single memcpy,
which would have avoided the bug fixed in commit
56c09de3

 ("geneve: allow changing DF behavior after creation").

Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

On link down, the draining of the S/G cache should be done on all
_possible_ CPUs not just the ones that are online in that moment.
Fix this by changing the iterator.

Fixes: d70446ee

 ("dpaa2-eth: send a scatter-gather FD instead of realloc-ing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The variable 'err = -ENODEV;' in au1000_probe() is
duplicate, so remove redundant one. And remove the
extra blank lines in the file au1000_eth.c

Signed-off-by: Zhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When investigating performance issues that involve latency / loss /
reordering it is useful to have the pcap from the sender-side as it
allows to easier infer the state of the sender's congestion-control,
loss-recovery, etc.

Allow the selftests to capture a pcap on both sender and receiver so
that this information is not lost when reproducing.

This patch also improves the file names. Instead of:

  ns4-5ee79a56-X4O6gS-ns3-5ee79a56-X4O6gS-MPTCP-MPTCP-10.0.3.1.pcap

We now have something like for the same test:

  5ee79a56-X4O6gS-ns3-ns4-MPTCP-MPTCP-10.0.3.1-10030-connector.pcap
  5ee79a56-X4O6gS-ns3-ns4-MPTCP-MPTCP-10.0.3.1-10030-listener.pcap

It was a connection from ns3 to ns4, better to start with ns3 then. The
port is also added, easier to find the trace we want.

Co-developed-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vaibhav Gupta says:

====================
ethernet: sun: use generic power management

Linux Kernel Mentee: Remove Legacy Power Management.

The purpose of this patch series is to remove legacy power management callbacks
from sun ethernet drivers.

The callbacks performing suspend() and resume() operations are still calling
pci_save_state(), pci_set_power_state(), etc. and handling the power management
themselves, which is not recommended.

The conversion requires the removal of the those function calls and change the
callback definition accordingly and make use of dev_pm_ops structure.

All patches are compile-tested only.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.

After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.

The driver was calling pci_save/restore_state() which is no more needed.

Compile-tested only.

Signed-off-by: Vaibhav Gupta <vaibhavgupta40@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>