- Oct 04, 2023
-
-
Patrick Rohr authored
This change adds a sysctl to opt-out of RFC4862 section 5.5.3e's valid lifetime derivation mechanism. RFC4862 section 5.5.3e prescribes that the valid lifetime in a Router Advertisement PIO shall be ignored if it less than 2 hours and to reset the lifetime of the corresponding address to 2 hours. An in-progress 6man draft (see draft-ietf-6man-slaac-renum-07 section 4.2) is currently looking to remove this mechanism. While this draft has not been moving particularly quickly for other reasons, there is widespread consensus on section 4.2 which updates RFC4862 section 5.5.3e. Cc: Maciej Żenczykowski <maze@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Jen Linkova <furry@google.com> Signed-off-by:
Patrick Rohr <prohr@google.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20230925214711.959704-1-prohr@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Bagas Sanjaya says: ==================== Documentation fixes for dpll subsystem Here is a mini docs fixes for dpll subsystem. The fixes are all code block-related. This series is triggered because I was emailed by kernel test robot, alerting htmldocs warnings (see patch [1/2]). [1]: https://lore.kernel.org/all/20230918093240.29824-1-bagasdotme@gmail.com/ ==================== Link: https://lore.kernel.org/r/20230928052708.44820-1-bagasdotme@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Bagas Sanjaya authored
DPLL_CMD_PIN_GET netlink command output for mux-type pins looks ugly with normal paragraph formatting. Format it as a code block instead. Signed-off-by:
Bagas Sanjaya <bagasdotme@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/r/20230928052708.44820-3-bagasdotme@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Bagas Sanjaya authored
kernel test robot and Stephen Rothwell report htmldocs warnings: Documentation/driver-api/dpll.rst:427: WARNING: Error in "code-block" directive: maximum 1 argument(s) allowed, 18 supplied. .. code-block:: c <snipped>... Documentation/driver-api/dpll.rst:444: WARNING: Error in "code-block" directive: maximum 1 argument(s) allowed, 21 supplied. .. code-block:: c <snipped>... Documentation/driver-api/dpll.rst:474: WARNING: Error in "code-block" directive: maximum 1 argument(s) allowed, 12 supplied. .. code-block:: c <snipped>... Fix these above by adding missing blank line separator after code-block directive. Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202309180456.lOhxy9gS-lkp@intel.com/ Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/linux-next/20230918131521.155e9e63@canb.auug.org.au/ Fixes: dbb291f1 ("dpll: documentation on DPLL subsystem interface") Signed-off-by:
Bagas Sanjaya <bagasdotme@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Tested-by:
Randy Dunlap <rdunlap@infradead.org> Reviewed-by:
Vadim Fedorenko <vadim.fedorenko@linux.dev> Link: https://lore.kernel.org/r/20230928052708.44820-2-bagasdotme@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Przemek Kitszel says: ==================== introduce DEFINE_FLEX() macro Add DEFINE_FLEX() macro, that helps on-stack allocation of structures with trailing flex array member. Expose __struct_size() macro which reads size of data allocated by DEFINE_FLEX(). Accompany new macros introduction with actual usage, in the ice driver - hence targeting for netdev tree. Obvious benefits include simpler resulting code, less heap usage, less error checking. Less obvious is the fact that compiler has more room to optimize, and as a whole, even with more stuff on the stack, we end up with overall better (smaller) report from bloat-o-meter: add/remove: 8/6 grow/shrink: 7/18 up/down: 2211/-2270 (-59) (individual results in each patch). ==================== Link: https://lore.kernel.org/r/20230912115937.1645707-1-przemyslaw.kitszel@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Przemek Kitszel authored
Use DEFINE_FLEX() macro for 1-elem flex array members of ice_switch.c Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20230912115937.1645707-8-przemyslaw.kitszel@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Przemek Kitszel authored
Use DEFINE_FLEX() macro for 1-elem flex array use case of struct ice_aqc_dis_txq_item. Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20230912115937.1645707-7-przemyslaw.kitszel@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Przemek Kitszel authored
Use DEFINE_FLEX() macro for 1-elem flex array use case of struct ice_aqc_add_tx_qgrp. Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20230912115937.1645707-6-przemyslaw.kitszel@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Przemek Kitszel authored
Use DEFINE_FLEX() macro for constant-num-of-elems (4) flex array members of ice_ddp.c Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20230912115937.1645707-5-przemyslaw.kitszel@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Przemek Kitszel authored
Remove two arguments of ice_aq_move_sched_elems(). Last of them was always NULL, and @grps_req was always 1. Assuming @grps_req to be one, allows us to use DEFINE_FLEX() macro, what removes some need for heap allocations. Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20230912115937.1645707-4-przemyslaw.kitszel@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Przemek Kitszel authored
Replace array+size params of ice_sched_remove_elems:() by just single u32, as all callers are using it with "1". This enables moving from heap-based, to stack-based allocation, what is also more elegant thanks to DEFINE_FLEX() macro. Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20230912115937.1645707-3-przemyslaw.kitszel@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Przemek Kitszel authored
Add DEFINE_FLEX() macro for on-stack allocations of structs with flexible array member. Expose __struct_size() macro outside of fortify-string.h, as it could be used to read size of structs allocated by DEFINE_FLEX(). Move __member_size() alongside it. -Kees Using underlying array for on-stack storage lets us to declare known-at-compile-time structures without kzalloc(). Actual usage for ice driver is in following patches of the series. Missing __has_builtin() workaround is moved up to serve also assembly compilation with m68k-linux-gcc, see [1]. Error was (note the .S file extension): In file included from ../include/linux/linkage.h:5, from ../arch/m68k/fpsp040/skeleton.S:40: ../include/linux/compiler_types.h:331:5: warning: "__has_builtin" is not defined, evaluates to 0 [-Wundef] 331 | #if __has_builtin(__builtin_dynamic_object_size) | ^~~~~~~~~~~~~ ../include/linux/compiler_types.h:331:18: error: missing binary operator before token "(" 331 | #if __has_builtin(__builtin_dynamic_object_size) | ^ [1] https://lore.kernel.org/netdev/202308112122.OuF0YZqL-lkp@intel.com/ Co-developed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Przemek Kitszel <przemyslaw.kitszel@intel.com> Link: https://lore.kernel.org/r/20230912115937.1645707-2-przemyslaw.kitszel@intel.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
- Oct 03, 2023
-
-
Jakub Kicinski authored
Sebastian Andrzej Siewior says: ==================== bpf: Remove xdp_do_flush_map(). I had #1 split in several patches per vendor and then decided to merge it. I can repost it with one patch per vendor if this preferred. ==================== Link: https://lore.kernel.org/r/20230908143215.869913-1-bigeasy@linutronix.de Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Sebastian Andrzej Siewior authored
xdp_do_flush_map() can be removed because there is no more user in tree. Remove xdp_do_flush_map(). Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/20230908143215.869913-3-bigeasy@linutronix.de Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Sebastian Andrzej Siewior authored
xdp_do_flush_map() is deprecated and new code should use xdp_do_flush() instead. Replace xdp_do_flush_map() with xdp_do_flush(). Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Cc: Clark Wang <xiaoning.wang@nxp.com> Cc: Claudiu Manoil <claudiu.manoil@nxp.com> Cc: David Arinzon <darinzon@amazon.com> Cc: Edward Cree <ecree.xilinx@gmail.com> Cc: Felix Fietkau <nbd@nbd.name> Cc: Grygorii Strashko <grygorii.strashko@ti.com> Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: John Crispin <john@phrozen.org> Cc: Leon Romanovsky <leon@kernel.org> Cc: Lorenzo Bianconi <lorenzo@kernel.org> Cc: Louis Peens <louis.peens@corigine.com> Cc: Marcin Wojtas <mw@semihalf.com> Cc: Mark Lee <Mark-MC.Lee@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Noam Dagan <ndagan@amazon.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Saeed Bishara <saeedb@amazon.com> Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Sean Wang <sean.wang@mediatek.com> Cc: Shay Agroskin <shayagr@amazon.com> Cc: Shenwei Wang <shenwei.wang@nxp.com> Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Vladimir Oltean <vladimir.oltean@nxp.com> Cc: Wei Fang <wei.fang@nxp.com> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Acked-by:
Arthur Kiyanovski <akiyano@amazon.com> Acked-by:
Toke Høiland-Jørgensen <toke@redhat.com> Acked-by:
Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by:
Martin Habets <habetsm.xilinx@gmail.com> Acked-by:
Jesper Dangaard Brouer <hawk@kernel.org> Link: https://lore.kernel.org/r/20230908143215.869913-2-bigeasy@linutronix.de Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Dan Carpenter authored
The vcap_decode_rule() never returns NULL. There is no need to check for that. This code assumes that if it did return NULL we should end abruptly and return success. It is confusing. Fix the check to just be if (IS_ERR()) instead of if (IS_ERR_OR_NULL()). Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202309070831.hTvj9ekP-lkp@intel.com/ Signed-off-by:
Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by:
Simon Horman <horms@kernel.org> Reviewed-by:
Daniel Machon <daniel.machon@microchip.com> Link: https://lore.kernel.org/r/b88eba86-9488-4749-a896-7c7050132e7b@moroto.mountain Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
Lukasz Majewski says: ==================== net: dsa: hsr: Enable HSR HW offloading for KSZ9477 This patch series provides support for HSR HW offloading in KSZ9477 switch IC. To test this feature: ip link add name hsr0 type hsr slave1 lan1 slave2 lan2 supervision 45 version 1 ip link set dev lan1 up ip link set dev lan2 up ip a add 192.168.0.1/24 dev hsr0 ip link set dev hsr0 up To remove HSR network device: ip link del hsr0 To test if one can adjust MAC address: ip link set lan2 address 00:01:02:AA:BB:CC It is also possible to create another HSR interface, but it will only support HSR is software - e.g. ip link add name hsr1 type hsr slave1 lan3 slave2 lan4 supervision 45 version 1 Test HW: Two KSZ9477-EVB boards with HSR ports set to "Port1" and "Port2". Performance SW used: nuttcp -S --nofork nuttcp -vv -T 60 -r 192.168.0.2 nuttcp -vv -T 60 -t 192.168.0.2 Code: v6.6.0-rc2+ Linux net-next repository SHA1: 5a1b322c Tested HSR v0 and v1 Results: With KSZ9477 offloading support added: RX: 100 Mbps TX: 98 Mbps With no offloading RX: 63 Mbps TX: 63 Mbps ==================== Link: https://lore.kernel.org/r/20230922133108.2090612-1-lukma@denx.de Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Lukasz Majewski authored
This patch adds functions for providing in KSZ9477 switch HSR (High-availability Seamless Redundancy) hardware offloading. According to AN3474 application note following features are provided: - TX packet duplication from host to switch (NETIF_F_HW_HSR_DUP) - RX packet duplication discarding - Prevention of packet loop For last two ones - there is a probability that some packets will not be filtered in HW (in some special cases - described in AN3474). Hence, the HSR core code shall be used to discard those not caught frames. Moreover, some switch registers adjustments are required - like setting MAC address of HSR network interface. Additionally, the KSZ9477 switch has been configured to forward frames between HSR ports (e.g. 1,2) members to provide support for NETIF_F_HW_HSR_FWD flag. Join and leave functions are written in a way, that are executed with single port - i.e. configuration is NOT done only when second HSR port is configured. Co-developed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Lukasz Majewski <lukma@denx.de> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Vladimir Oltean authored
Defining macros which have the same name but different values is bad practice, because it makes it hard to avoid code duplication. The same code does different things, depending on the file it's placed in. Case in point, we want to access REG_SW_MAC_ADDR from ksz_common.c, but currently we can't, because we don't know which kszXXXX_reg.h to include from the common code. Remove the REG_SW_MAC_ADDR_{0..5} macros from ksz8795_reg.h and ksz9477_reg.h, and re-add this register offset to the dev->info->regs[] array. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Lukasz Majewski <lukma@denx.de> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Lukasz Majewski authored
The KSZ9477 has support for HSR (High-Availability Seamless Redundancy). One of its offloading (i.e. performed in the switch IC hardware) features is to duplicate received frame to both HSR aware switch ports. To achieve this goal - the tail TAG needs to be modified. To be more specific, both ports must be marked as destination (egress) ones. The NETIF_F_HW_HSR_DUP flag indicates that the device supports HSR and assures (in HSR core code) that frame is sent only once from HOST to switch with tail tag indicating both ports. Signed-off-by:
Lukasz Majewski <lukma@denx.de> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Vladimir Oltean authored
In some cases, drivers may need to veto the changing of a MAC address on a user port. Such is the case with KSZ9477 when it offloads a HSR device, because it programs the MAC address of multiple ports to a shared hardware register. Those ports need to have equal MAC addresses for the lifetime of the HSR offload. Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Lukasz Majewski <lukma@denx.de> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Vladimir Oltean authored
Drivers can provide meaningful error messages which state a reason why they can't perform an offload, and dsa_slave_changeupper() already has the infrastructure to propagate these over netlink rather than printing to the kernel log. So pass the extack argument and modify the xrs700x driver's port_hsr_join() prototype. Also take the opportunity and use the extack for the 2 -EOPNOTSUPP cases from xrs700x_hsr_join(). Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Lukasz Majewski <lukma@denx.de> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Raju Lakkaraju authored
Add a quirk for a copper SFP that identifies itself as "FS" "SFP-2.5G-T". This module's PHY is inaccessible, and can only run at 2500base-X with the host without negotiation. Add a quirk to enable the 2500base-X interface mode with 2500base-T support and disable auto negotiation. Signed-off-by:
Raju Lakkaraju <Raju.Lakkaraju@microchip.com> Link: https://lore.kernel.org/r/20230925080059.266240-1-Raju.Lakkaraju@microchip.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Beniamino Galvani authored
The function doesn't modify the addresses passed as input, mark them as 'const' to make that clear. Signed-off-by:
Beniamino Galvani <b.galvani@gmail.com> Reviewed-by:
Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/20230924153014.786962-1-b.galvani@gmail.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Linus Walleij authored
The Altima AC101L is obviously compatible with the AMD PHY, as seen by reading the datasheet. Datasheet: https://docs.broadcom.com/doc/AC101L-DS05-405-RDS.pdf Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230924-ac101l-phy-v1-1-5e6349e28aa4@linaro.org Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Christophe JAILLET authored
'n_tables' is small, UDP_TUNNEL_NIC_MAX_TABLES = 4 as a maximum. So there is no real point to allocate the 'entries' pointers array with a dedicate memory allocation. Using a flexible array for struct udp_tunnel_nic->entries avoids the overhead of an additional memory allocation. This also saves an indirection when the array is accessed. Finally, __counted_by() can be used for run-time bounds checking if configured and supported by the compiler. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/4a096ba9cf981a588aa87235bb91e933ee162b3d.1695542544.git.christophe.jaillet@wanadoo.fr Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Linus Walleij authored
As we don't specify the MTU in the driver, the framework will fall back to 1500 bytes and this doesn't work very well when we try to attach a DSA switch: eth1: mtu greater than device maximum ixp4xx_eth c800a000.ethernet eth1: error -22 setting MTU to 1504 to include DSA overhead I checked the developer docs and the hardware can actually do really big frames, so update the driver accordingly. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20230923-ixp4xx-eth-mtu-v1-1-9e88b908e1b2@linaro.org Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
Eric Dumazet says: ==================== tcp_metrics: four fixes Looking at an inconclusive syzbot report, I was surprised to see that tcp_metrics cache on my host was full of useless entries, even though I have /proc/sys/net/ipv4/tcp_no_metrics_save set to 1. While looking more closely I found a total of four issues. ==================== Link: https://lore.kernel.org/r/20230922220356.3739090-1-edumazet@google.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Eric Dumazet authored
This is inspired by several syzbot reports where tcp_metrics_flush_all() was seen in the traces. We can avoid acquiring tcp_metrics_lock for empty buckets, and we should add one cond_resched() to break potential long loops. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Eric Dumazet authored
tcp_init_metrics() only wants to get metrics if they were previously stored in the cache. Creating an entry is adding useless costs, especially when tcp_no_metrics_save is set. Fixes: 51c5d0c4 ("tcp: Maintain dynamic metrics in local cache.") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Eric Dumazet authored
We need to set tp->snd_ssthresh to TCP_INFINITE_SSTHRESH in the case tcp_get_metrics() fails for some reason. Fixes: 9ad7c049 ("tcp: RFC2988bis + taking RTT sample from 3WHS for the passive open side") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Eric Dumazet authored
When removing an item from RCU protected list, we must prevent store-tearing, using rcu_assign_pointer() or WRITE_ONCE(). Fixes: 04f721c6 ("tcp_metrics: Rewrite tcp_metrics_flush_all") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Jakub Kicinski authored
Chuck Lever says: ==================== Fix implicit sign conversions in handshake upcall An internal static analysis tool noticed some implicit sign conversions for some of the arguments in the handshake upcall protocol. ==================== Link: https://lore.kernel.org/r/169530154802.8905.2645661840284268222.stgit@oracle-102.nfsv4bat.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Chuck Lever authored
key_serial_t fields are signed integers. Use nla_get/put_s32 for those to avoid implicit signed conversion in the netlink protocol. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/169530167716.8905.645746457741372879.stgit@oracle-102.nfsv4bat.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Chuck Lever authored
Socket file descriptors are signed integers. Use nla_get/put_s32 for those to avoid implicit signed conversion in the netlink protocol. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/169530165057.8905.8650469415145814828.stgit@oracle-102.nfsv4bat.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Kees Cook says: ==================== mlxsw: Annotate structs with __counted_by This annotates several mlxsw structures with the coming __counted_by attribute for bounds checking of flexible arrays at run-time. For more details, see commit dd06e72e ("Compiler Attributes: Add __counted_by macro"). ==================== Link: https://lore.kernel.org/r/20230929180611.work.870-kees@kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct mlxsw_sp_span. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Petr Machata <petrm@nvidia.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20230929180746.3005922-5-keescook@chromium.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct mlxsw_sp_nexthop_group_info. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Petr Machata <petrm@nvidia.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20230929180746.3005922-4-keescook@chromium.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct mlxsw_sp_counter_pool. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Petr Machata <petrm@nvidia.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20230929180746.3005922-3-keescook@chromium.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Kees Cook authored
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time checking via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct mlxsw_env. [1] https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci Cc: Petr Machata <petrm@nvidia.com> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20230929180746.3005922-2-keescook@chromium.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-