- Jan 08, 2022
-
-
Jing Liu authored
KVM_GET_SUPPORTED_CPUID should not include any dynamic xstates in CPUID[0xD] if they have not been requested with prctl. Otherwise a process which directly passes KVM_GET_SUPPORTED_CPUID to KVM_SET_CPUID2 would now fail even if it doesn't intend to use a dynamically enabled feature. Userspace must know that prctl is required and allocate >4K xstate buffer before setting any dynamic bit. Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-5-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Jing Liu authored
CPUID.0xD.1.EBX enumerates the size of the XSAVE area (in compacted format) required by XSAVES. If CPUID.0xD.i.ECX[1] is set for a state component (i), this state component should be located on the next 64-bytes boundary following the preceding state component in the compacted layout. Fix xstate_required_size() to follow the alignment rule. AMX is the first state component with 64-bytes alignment to catch this bug. Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-4-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Thomas Gleixner authored
To support dynamically enabled FPU features for guests prepare the guest pseudo FPU container to keep track of the currently enabled xfeatures and the guest permissions. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-3-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Thomas Gleixner authored
KVM requires a clear separation of host user space and guest permissions for dynamic XSTATE components. Add a guest permissions member to struct fpu and a separate set of prctl() arguments: ARCH_GET_XCOMP_GUEST_PERM and ARCH_REQ_XCOMP_GUEST_PERM. The semantics are equivalent to the host user space permission control except for the following constraints: 1) Permissions have to be requested before the first vCPU is created 2) Permissions are frozen when the first vCPU is created to ensure consistency. Any attempt to expand permissions via the prctl() after that point is rejected. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Jing Liu <jing2.liu@intel.com> Signed-off-by:
Yang Zhong <yang.zhong@intel.com> Message-Id: <20220105123532.12586-2-yang.zhong@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Michael Roth authored
Now that core kvm_util declarations have special home in kvm_util_base.h, move ucall-related declarations out into a separate header. Signed-off-by:
Michael Roth <michael.roth@amd.com> Message-Id: <20211210164620.11636-3-michael.roth@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Michael Roth authored
Between helper macros and interfaces that will be introduced in subsequent patches, much of kvm_util.h would end up being declarations specific to ucall. Ideally these could be separated out into a separate header since they are not strictly required for writing guest tests and are mostly self-contained interfaces other than a reliance on a few core declarations like struct kvm_vm. This doesn't make a big difference as far as how tests will be compiled/written since all these interfaces will still be packaged up into a single/common libkvm.a used by all tests, but it is still nice to be able to compartmentalize to improve readabilty and reduce merge conflicts in the future for common tasks like adding new interfaces to kvm_util.h. Furthermore, some of the ucall declarations will be arch-specific, requiring various #ifdef'ery in kvm_util.h. Ideally these declarations could live in separate arch-specific headers, e.g. include/<arch>/ucall.h, which would handle arch-specific declarations as well as pulling in common ucall-related declarations shared by all archs. One simple way to do this would be to #include ucall.h at the bottom of kvm_util.h, after declarations it relies upon like struct kvm_vm. This is brittle however, and doesn't scale easily to other sets of interfaces that may be added in the future. Instead, move all declarations currently in kvm_util.h into kvm_util_base.h, then have kvm_util.h #include it. With this change, non-base declarations can be selectively moved/introduced into separate headers, which can then be included in kvm_util.h so that individual tests don't need to be touched. Subsequent patches will then move ucall-related declarations into a separate header to meet the above goals. Signed-off-by:
Michael Roth <michael.roth@amd.com> Message-Id: <20211210164620.11636-2-michael.roth@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Jan 07, 2022
-
-
Michael Roth authored
Normally guests will set up CR3 themselves, but some guests, such as kselftests, and potentially CONFIG_PVH guests, rely on being booted with paging enabled and CR3 initialized to a pre-allocated page table. Currently CR3 updates via KVM_SET_SREGS* are not loaded into the guest VMCB until just prior to entering the guest. For SEV-ES/SEV-SNP, this is too late, since it will have switched over to using the VMSA page prior to that point, with the VMSA CR3 copied from the VMCB initial CR3 value: 0. Address this by sync'ing the CR3 value into the VMCB save area immediately when KVM_SET_SREGS* is issued so it will find it's way into the initial VMSA. Suggested-by:
Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
Michael Roth <michael.roth@amd.com> Message-Id: <20211216171358.61140-10-michael.roth@amd.com> [Remove vmx_post_set_cr3; add a remark about kvm_set_cr3 not calling the new hook. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Peter Zijlstra authored
Use asm-goto-output for smaller fast path code. Message-Id: <YbcbbGW2GcMx6KpD@hirez.programming.kicks-ass.net> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Woodhouse authored
When dirty ring logging is enabled, any dirty logging without an active vCPU context will cause a kernel oops. But we've already declared that the shared_info page doesn't get dirty tracking anyway, since it would be kind of insane to mark it dirty every time we deliver an event channel interrupt. Userspace is supposed to just assume it's always dirty any time a vCPU can run or event channels are routed. So stop using the generic kvm_write_wall_clock() and just write directly through the gfn_to_pfn_cache that we already have set up. We can make kvm_write_wall_clock() static in x86.c again now, but let's not remove the 'sec_hi_ofs' argument even though it's not used yet. At some point we *will* want to use that for KVM guests too. Fixes: 629b5348 ("KVM: x86/xen: update wallclock region") Reported-by:
butt3rflyh4ck <butterflyhuangxx@gmail.com> Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-6-dwmw2@infradead.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Woodhouse authored
This adds basic support for delivering 2 level event channels to a guest. Initially, it only supports delivery via the IRQ routing table, triggered by an eventfd. In order to do so, it has a kvm_xen_set_evtchn_fast() function which will use the pre-mapped shared_info page if it already exists and is still valid, while the slow path through the irqfd_inject workqueue will remap the shared_info page if necessary. It sets the bits in the shared_info page but not the vcpu_info; that is deferred to __kvm_xen_has_interrupt() which raises the vector to the appropriate vCPU. Add a 'verbose' mode to xen_shinfo_test while adding test cases for this. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-5-dwmw2@infradead.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Woodhouse authored
Use the newly reinstated gfn_to_pfn_cache to maintain a kernel mapping of the Xen shared_info page so that it can be accessed in atomic context. Note that we do not participate in dirty tracking for the shared info page and we do not explicitly mark it dirty every single tim we deliver an event channel interrupts. We wouldn't want to do that even if we *did* have a valid vCPU context with which to do so. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-4-dwmw2@infradead.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Woodhouse authored
This can be used in two modes. There is an atomic mode where the cached mapping is accessed while holding the rwlock, and a mode where the physical address is used by a vCPU in guest mode. For the latter case, an invalidation will wake the vCPU with the new KVM_REQ_GPC_INVALIDATE, and the architecture will need to refresh any caches it still needs to access before entering guest mode again. Only one vCPU can be targeted by the wake requests; it's simple enough to make it wake all vCPUs or even a mask but I don't see a use case for that additional complexity right now. Invalidation happens from the invalidate_range_start MMU notifier, which needs to be able to sleep in order to wake the vCPU and wait for it. This means that revalidation potentially needs to "wait" for the MMU operation to complete and the invalidate_range_end notifier to be invoked. Like the vCPU when it takes a page fault in that period, we just spin — fixing that in a future patch by implementing an actual *wait* may be another part of shaving this particularly hirsute yak. As noted in the comments in the function itself, the only case where the invalidate_range_start notifier is expected to be called *without* being able to sleep is when the OOM reaper is killing the process. In that case, we expect the vCPU threads already to have exited, and thus there will be nothing to wake, and no reason to wait. So we clear the KVM_REQUEST_WAIT bit and send the request anyway, then complain loudly if there actually *was* anything to wake up. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-3-dwmw2@infradead.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Woodhouse authored
The various kvm_write_guest() and mark_page_dirty() functions must only ever be called in the context of an active vCPU, because if dirty ring tracking is enabled it may simply oops when kvm_get_running_vcpu() returns NULL for the vcpu and then kvm_dirty_ring_get() dereferences it. This oops was reported by "butt3rflyh4ck" <butterflyhuangxx@gmail.com> in https://lore.kernel.org/kvm/CAFcO6XOmoS7EacN_n6v4Txk7xL7iqRa2gABg3F7E3Naf5uG94g@mail.gmail.com/ That actual bug will be fixed under separate cover but this warning should help to prevent new ones from being added. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211210163625.2886-2-dwmw2@infradead.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Woodhouse authored
I made the actual CPU bringup go nice and fast... and then Linux spends half a minute printing stupid nonsense about clocks and steal time for each of 256 vCPUs. Don't do that. Nobody cares. Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Message-Id: <20211209150938.3518-12-dwmw2@infradead.org> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Eric Hankland authored
When KVM retires a guest branch instruction through emulation, increment any vPMCs that are configured to monitor "branch instructions retired," and update the sample period of those counters so that they will overflow at the right time. Signed-off-by:
Eric Hankland <ehankland@google.com> [jmattson: - Split the code to increment "branch instructions retired" into a separate commit. - Moved/consolidated the calls to kvm_pmu_trigger_event() in the emulation of VMLAUNCH/VMRESUME to accommodate the evolution of that code. ] Fixes: f5132b01 ("KVM: Expose a version 2 architectural PMU to a guests") Signed-off-by:
Jim Mattson <jmattson@google.com> Message-Id: <20211130074221.93635-7-likexu@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Eric Hankland authored
When KVM retires a guest instruction through emulation, increment any vPMCs that are configured to monitor "instructions retired," and update the sample period of those counters so that they will overflow at the right time. Signed-off-by:
Eric Hankland <ehankland@google.com> [jmattson: - Split the code to increment "branch instructions retired" into a separate commit. - Added 'static' to kvm_pmu_incr_counter() definition. - Modified kvm_pmu_incr_counter() to check pmc->perf_event->state == PERF_EVENT_STATE_ACTIVE. ] Fixes: f5132b01 ("KVM: Expose a version 2 architectural PMU to a guests") Signed-off-by:
Jim Mattson <jmattson@google.com> [likexu: - Drop checks for pmc->perf_event or event state or event type - Increase a counter once its umask bits and the first 8 select bits are matched - Rewrite kvm_pmu_incr_counter() with a less invasive approach to the host perf; - Rename kvm_pmu_record_event to kvm_pmu_trigger_event; - Add counter enable and CPL check for kvm_pmu_trigger_event(); ] Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20211130074221.93635-6-likexu@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Like Xu authored
Depending on whether intr should be triggered or not, KVM registers two different event overflow callbacks in the perf_event context. The code skeleton of these two functions is very similar, so the pmc->intr can be stored into pmc from pmc_reprogram_counter() which provides smaller instructions footprint against the u-architecture branch predictor. The __kvm_perf_overflow() can be called in non-nmi contexts and a flag is needed to distinguish the caller context and thus avoid a check on kvm_is_in_guest(), otherwise we might get warnings from suspicious RCU or check_preemption_disabled(). Suggested-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20211130074221.93635-5-likexu@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Like Xu authored
Since we set the same semantic event value for the fixed counter in pmc->eventsel, returning the perf_hw_id for the fixed counter via find_fixed_event() can be painlessly replaced by pmc_perf_hw_id() with the help of pmc_is_fixed() check. Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20211130074221.93635-4-likexu@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Like Xu authored
The find_arch_event() returns a "unsigned int" value, which is used by the pmc_reprogram_counter() to program a PERF_TYPE_HARDWARE type perf_event. The returned value is actually the kernel defined generic perf_hw_id, let's rename it to pmc_perf_hw_id() with simpler incoming parameters for better self-explanation. Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20211130074221.93635-3-likexu@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Like Xu authored
The current pmc->eventsel for fixed counter is underutilised. The pmc->eventsel can be setup for all known available fixed counters since we have mapping between fixed pmc index and the intel_arch_events array. Either gp or fixed counter, it will simplify the later checks for consistency between eventsel and perf_hw_id. Signed-off-by:
Like Xu <likexu@tencent.com> Message-Id: <20211130074221.93635-2-likexu@tencent.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Because IceLake has 4 fixed performance counters but KVM only supports 3, it is possible for reprogram_fixed_counters to pass to reprogram_fixed_counter an index that is out of bounds for the fixed_pmc_events array. Ultimately intel_find_fixed_event, which is the only place that uses fixed_pmc_events, handles this correctly because it checks against the size of fixed_pmc_events anyway. Every other place operates on the fixed_counters[] array which is sized according to INTEL_PMC_MAX_FIXED. However, it is cleaner if the unsupported performance counters are culled early on in reprogram_fixed_counters. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Lai Jiangshan authored
When !CR0_PG -> CR0_PG, vcpu->arch.cr3 becomes active, but GUEST_CR3 is still vmx->ept_identity_map_addr if EPT + !URG. So VCPU_EXREG_CR3 is considered to be dirty and GUEST_CR3 needs to be updated in this case. Reported-by:
Maxim Levitsky <mlevitsk@redhat.com> Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20211216021938.11752-4-jiangshanlai@gmail.com> Fixes: c62c7bd4 ("KVM: VMX: Update vmcs.GUEST_CR3 only when the guest CR3 is dirty") Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Lai Jiangshan authored
For shadow paging, the page table needs to be reconstructed before the coming VMENTER if the guest PDPTEs is changed. But not all paths that call load_pdptrs() will cause the page tables to be reconstructed. Normally, kvm_mmu_reset_context() and kvm_mmu_free_roots() are used to launch later reconstruction. The commit d81135a5("KVM: x86: do not reset mmu if CR0.CD and CR0.NW are changed") skips kvm_mmu_reset_context() after load_pdptrs() when changing CR0.CD and CR0.NW. The commit 21823fbd("KVM: x86: Invalidate all PGDs for the current PCID on MOV CR3 w/ flush") skips kvm_mmu_free_roots() after load_pdptrs() when rewriting the CR3 with the same value. The commit a91a7c70("KVM: X86: Don't reset mmu context when toggling X86_CR4_PGE") skips kvm_mmu_reset_context() after load_pdptrs() when changing CR4.PGE. Guests like linux would keep the PDPTEs unchanged for every instance of pagetable, so this missing reconstruction has no problem for linux guests. Fixes: d81135a5("KVM: x86: do not reset mmu if CR0.CD and CR0.NW are changed") Fixes: 21823fbd("KVM: x86: Invalidate all PGDs for the current PCID on MOV CR3 w/ flush") Fixes: a91a7c70 ("KVM: X86: Don't reset mmu context when toggling X86_CR4_PGE") Suggested-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20211216021938.11752-3-jiangshanlai@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Lai Jiangshan authored
The host CR3 in the vcpu thread can only be changed when scheduling, so commit 15ad9762 ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()") changed vmx.c to only save it in vmx_prepare_switch_to_guest(). However, it also has to be synced in vmx_sync_vmcs_host_state() when switching VMCS. vmx_set_host_fs_gs() is called in both places, so rename it to vmx_set_vmcs_host_state() and make it update HOST_CR3. Fixes: 15ad9762 ("KVM: VMX: Save HOST_CR3 in vmx_prepare_switch_to_guest()") Signed-off-by:
Lai Jiangshan <laijs@linux.alibaba.com> Message-Id: <20211216021938.11752-2-jiangshanlai@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
This reverts commit 24cd19a2. Sean Christopherson reports: "Commit 24cd19a2 ('KVM: X86: Update mmu->pdptrs only when it is changed') breaks nested VMs with EPT in L0 and PAE shadow paging in L2. Reproducing is trivial, just disable EPT in L1 and run a VM. I haven't investigating how it breaks things." Reviewed-by:
Sean Christopherson <seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Peter Gonda authored
Add tests to confirm mirror vms can only run correct subset of commands. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by:
Peter Gonda <pgonda@google.com> Message-Id: <20211208191642.3792819-4-pgonda@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Peter Gonda authored
TEST_ASSERT in SEV ioctl was allowing errors because it checked return value was good OR the FW error code was OK. This TEST_ASSERT should require both (aka. AND) values are OK. Removes the LAUNCH_START from the mirror VM because this call correctly fails because mirror VMs cannot call this command. Currently issues with the PSP driver functions mean the firmware error is not always reset to SEV_RET_SUCCESS when a call is successful. Mainly sev_platform_init() doesn't correctly set the fw error if the platform has already been initialized. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by:
Peter Gonda <pgonda@google.com> Message-Id: <20211208191642.3792819-3-pgonda@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Peter Gonda authored
Mirrors should not be able to call LAUNCH_START. Remove the call on the mirror to correct the test before fixing sev_ioctl() to correctly assert on this failed ioctl. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Marc Orr <marcorr@google.com> Signed-off-by:
Peter Gonda <pgonda@google.com> Message-Id: <20211208191642.3792819-2-pgonda@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
https://github.com/kvm-riscv/linuxPaolo Bonzini authored
KVM/riscv changes for 5.17, take #1 - Use common KVM implementation of MMU memory caches - SBI v0.2 support for Guest - Initial KVM selftests support - Fix to avoid spurious virtual interrupts after clearing hideleg CSR - Update email address for Anup and Atish
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarmPaolo Bonzini authored
KVM/arm64 updates for Linux 5.16 - Simplification of the 'vcpu first run' by integrating it into KVM's 'pid change' flow - Refactoring of the FP and SVE state tracking, also leading to a simpler state and less shared data between EL1 and EL2 in the nVHE case - Tidy up the header file usage for the nvhe hyp object - New HYP unsharing mechanism, finally allowing pages to be unmapped from the Stage-1 EL2 page-tables - Various pKVM cleanups around refcounting and sharing - A couple of vgic fixes for bugs that would trigger once the vcpu xarray rework is merged, but not sooner - Add minimal support for ARMv8.7's PMU extension - Rework kvm_pgtable initialisation ahead of the NV work - New selftest for IRQ injection - Teach selftests about the lack of default IPA space and page sizes - Expand sysreg selftest to deal with Pointer Authentication - The usual bunch of cleanups and doc update
-
- Jan 06, 2022
-
-
Anup Patel authored
I am no longer work at Western Digital so update my email address to personal one and add entries to .mailmap as well. Signed-off-by:
Anup Patel <anup@brainfault.org> Acked-by:
Atish Patra <atishp@rivosinc.com>
-
Vincent Chen authored
When the last VM is terminated, the host kernel will invoke function hardware_disable_nolock() on each CPU to disable the related virtualization functions. Here, RISC-V currently only clears hideleg CSR and hedeleg CSR. This behavior will cause the host kernel to receive spurious interrupts if hvip CSR has pending interrupts and the corresponding enable bits in vsie CSR are asserted. To avoid it, hvip CSR and vsie CSR must be cleared before clearing hideleg CSR. Fixes: 99cdc6c1 ("RISC-V: Add initial skeletal KVM support") Signed-off-by:
Vincent Chen <vincent.chen@sifive.com> Reviewed-by:
Anup Patel <anup.patel@wdc.com> Signed-off-by:
Anup Patel <anup.patel@wdc.com>
-
Anup Patel authored
We add initial support for RISC-V 64-bit in KVM selftests using which we can cross-compile and run arch independent tests such as: demand_paging_test dirty_log_test kvm_create_max_vcpus, kvm_page_table_test set_memory_region_test kvm_binary_stats_test All VM guest modes defined in kvm_util.h require at least 48-bit guest virtual address so to use KVM RISC-V selftests hardware need to support at least Sv48 MMU for guest (i.e. VS-mode). Signed-off-by:
Anup Patel <anup.patel@wdc.com> Reviewed-and-tested-by:
Atish Patra <atishp@rivosinc.com>
-
Anup Patel authored
We add EXTRA_CFLAGS to the common CFLAGS of top-level Makefile which will allow users to pass additional compile-time flags such as "-static". Signed-off-by:
Anup Patel <anup.patel@wdc.com> Reviewed-and-tested-by:
Atish Patra <atishp@rivosinc.com> Reviewed-and-tested-by:
Sean Christopherson <seanjc@google.com>
-
Anup Patel authored
The number of GPA bits supported for a RISC-V Guest/VM is based on the MMU mode used by the G-stage translation. The KVM RISC-V will detect and use the best possible MMU mode for the G-stage in kvm_arch_init(). We add a generic VM capability KVM_CAP_VM_GPA_BITS which can be used by the KVM userspace to get the number of GPA (guest physical address) bits supported for a Guest/VM. Signed-off-by:
Anup Patel <anup.patel@wdc.com> Reviewed-and-tested-by:
Atish Patra <atishp@rivosinc.com>
-
Anup Patel authored
The SBI experimental extension space is for temporary (or experimental) stuff whereas SBI vendor extension space is for hardware vendor specific stuff. Both these SBI extension spaces won't be standardized by the SBI specification so let's blindly forward such SBI calls to the userspace. Signed-off-by:
Anup Patel <anup.patel@wdc.com> Reviewed-and-tested-by:
Atish Patra <atishp@rivosinc.com>
-
Jisheng Zhang authored
There are no users outside vcpu_fp.c so make kvm_riscv_vcpu_fp_clean() static. Signed-off-by:
Jisheng Zhang <jszhang@kernel.org> Signed-off-by:
Anup Patel <anup.patel@wdc.com>
-
Atish Patra authored
I am no longer employed by western digital. Update my email address to personal one and add entries to .mailmap as well. Signed-off-by:
Atish Patra <atishp@atishpatra.org> Signed-off-by:
Anup Patel <anup.patel@wdc.com>
-
Atish Patra authored
SBI HSM extension allows OS to start/stop harts any time. It also allows ordered booting of harts instead of random booting. Implement SBI HSM exntesion and designate the vcpu 0 as the boot vcpu id. All other non-zero non-booting vcpus should be brought up by the OS implementing HSM extension. If the guest OS doesn't implement HSM extension, only single vcpu will be available to OS. Signed-off-by:
Atish Patra <atish.patra@wdc.com> Signed-off-by:
Atish Patra <atishp@rivosinc.com> Signed-off-by:
Anup Patel <anup.patel@wdc.com>
-
Atish Patra authored
The SBI v0.2 contains some of the improved versions of required v0.1 extensions such as remote fence, timer and IPI. This patch implements those extensions. Signed-off-by:
Atish Patra <atish.patra@wdc.com> Signed-off-by:
Atish Patra <atishp@rivosinc.com> Signed-off-by:
Anup Patel <anup.patel@wdc.com>
-