- Aug 18, 2021
-
-
Neal Cardwell authored
[ Upstream commit 6de035fe ] Currently if BBR congestion control is initialized after more than 2B packets have been delivered, depending on the phase of the tp->delivered counter the tracking of BBR round trips can get stuck. The bug arises because if tp->delivered is between 2^31 and 2^32 at the time the BBR congestion control module is initialized, then the initialization of bbr->next_rtt_delivered to 0 will cause the logic to believe that the end of the round trip is still billions of packets in the future. More specifically, the following check will fail repeatedly: !before(rs->prior_delivered, bbr->next_rtt_delivered) and thus the connection will take up to 2B packets delivered before that check will pass and the connection will set: bbr->round_start = 1; This could cause many mechanisms in BBR to fail to trigger, for example bbr_check_full_bw_reached() would likely never exit STARTUP. This bug is 5 years old and has not been observed, and as a practical matter this would likely rarely trigger, since it would require transferring at least 2B packets, or likely more than 3 terabytes of data, before switching congestion control algorithms to BBR. This patch is a stable candidate for kernels as far back as v4.9, when tcp_bbr.c was added. Fixes: 0f8782ea ("tcp_bbr: add BBR congestion control") Signed-off-by:
Neal Cardwell <ncardwell@google.com> Reviewed-by:
Yuchung Cheng <ycheng@google.com> Reviewed-by:
Kevin Yang <yyd@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20210811024056.235161-1-ncardwell@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Willy Tarreau authored
[ Upstream commit 6922110d ] After migrating my laptop from 4.19-LTS to 5.4-LTS a while ago I noticed that my Ethernet port to which a bond and a VLAN interface are attached appeared to remain up after resuming from suspend with the cable unplugged (and that problem still persists with 5.10-LTS). It happens that the following happens: - the network driver (e1000e here) prepares to suspend, calls e1000e_down() which calls netif_carrier_off() to signal that the link is going down. - netif_carrier_off() adds a link_watch event to the list of events for this device - the device is completely stopped. - the machine suspends - the cable is unplugged and the machine brought to another location - the machine is resumed - the queued linkwatch events are processed for the device - the device doesn't yet have the __LINK_STATE_PRESENT bit and its events are silently dropped - the device is resumed with its link down - the upper VLAN and bond interfaces are never notified that the link had been turned down and remain up - the only way to provoke a change is to physically connect the machine to a port and possibly unplug it. The state after resume looks like this: $ ip -br li | egrep 'bond|eth' bond0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> eth0 DOWN e8:6a:64:64:64:64 <NO-CARRIER,BROADCAST,MULTICAST,SLAVE,UP> eth0.2@eth0 UP e8:6a:64:64:64:64 <BROADCAST,MULTICAST,SLAVE,UP,LOWER_UP> Placing an explicit call to netdev_state_change() either in the suspend or the resume code in the NIC driver worked around this but the solution is not satisfying. The issue in fact really is in link_watch that loses events while it ought not to. It happens that the test for the device being present was added by commit 124eee3f ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev") in 4.20 to avoid an access to devices that are not present. Instead of dropping events, this patch proceeds slightly differently by postponing their handling so that they happen after the device is fully resumed. Fixes: 124eee3f ("net: linkwatch: add check for netdevice being present to linkwatch_do_dev") Link: https://lists.openwall.net/netdev/2018/03/15/62 Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Geert Uytterhoeven <geert+renesas@glider.be> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Willy Tarreau <w@1wt.eu> Link: https://lore.kernel.org/r/20210809160628.22623-1-w@1wt.eu Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yang Yingliang authored
[ Upstream commit 519133de ] I got a memleak report: BUG: memory leak unreferenced object 0x607ee521a658 (size 240): comm "syz-executor.0", pid 955, jiffies 4294780569 (age 16.449s) hex dump (first 32 bytes, cpu 1): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000d830ea5a>] br_multicast_add_port+0x1c2/0x300 net/bridge/br_multicast.c:1693 [<00000000274d9a71>] new_nbp net/bridge/br_if.c:435 [inline] [<00000000274d9a71>] br_add_if+0x670/0x1740 net/bridge/br_if.c:611 [<0000000012ce888e>] do_set_master net/core/rtnetlink.c:2513 [inline] [<0000000012ce888e>] do_set_master+0x1aa/0x210 net/core/rtnetlink.c:2487 [<0000000099d1cafc>] __rtnl_newlink+0x1095/0x13e0 net/core/rtnetlink.c:3457 [<00000000a01facc0>] rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3488 [<00000000acc9186c>] rtnetlink_rcv_msg+0x369/0xa10 net/core/rtnetlink.c:5550 [<00000000d4aabb9c>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000bc2e12a3>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<00000000bc2e12a3>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000e4dc2d0e>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929 [<000000000d22c8b3>] sock_sendmsg_nosec net/socket.c:654 [inline] [<000000000d22c8b3>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000e281417a>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000237aa2ab>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 [<000000004f2dc381>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433 [<0000000005feca6c>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47 [<000000007304477d>] entry_SYSCALL_64_after_hwframe+0x44/0xae On error path of br_add_if(), p->mcast_stats allocated in new_nbp() need be freed, or it will be leaked. Fixes: 1080ab95 ("net: bridge: add support for IGMP/MLD stats and export them via netlink") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Acked-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20210809132023.978546-1-yangyingliang@huawei.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nikolay Aleksandrov authored
[ Upstream commit 45a68787 ] Ignore fdb flags when adding port extern learn entries and always set BR_FDB_LOCAL flag when adding bridge extern learn entries. This is closest to the behaviour we had before and avoids breaking any use cases which were allowed. This patch fixes iproute2 calls which assume NUD_PERMANENT and were allowed before, example: $ bridge fdb add 00:11:22:33:44:55 dev swp1 extern_learn Extern learn entries are allowed to roam, but do not expire, so static or dynamic flags make no sense for them. Also add a comment for future reference. Fixes: eb100e0e ("net: bridge: allow to add externally learned entries from user-space") Fixes: 0541a629 ("net: bridge: validate the NUD_PERMANENT bit when adding an extern_learn FDB entry") Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Tested-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210810110010.43859-1-razor@blackwall.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andre Przywara authored
[ Upstream commit d1dee814 ] When we are building all the various pinctrl structures for the Allwinner pinctrl devices, we do some estimation about the maximum number of distinct function (names) that we will need. So far we take the number of pins as an upper bound, even though we can actually have up to four special functions per pin. This wasn't a problem until now, since we indeed have typically far more pins than functions, and most pins share common functions. However the H616 "-r" pin controller has only two pins, but four functions, so we run over the end of the array when we are looking for a matching function name in sunxi_pinctrl_add_function - there is no NULL sentinel left that would terminate the loop: [ 8.200648] Unable to handle kernel paging request at virtual address fffdff7efbefaff5 [ 8.209179] Mem abort info: .... [ 8.368456] Call trace: [ 8.370925] __pi_strcmp+0x90/0xf0 [ 8.374559] sun50i_h616_r_pinctrl_probe+0x1c/0x28 [ 8.379557] platform_probe+0x68/0xd8 Do an actual worst case allocation (4 functions per pin, three common functions and the sentinel) for the initial array allocation. This is now heavily overestimating the number of functions in the common case, but we will reallocate this array later with the actual number of functions, so it's only temporarily. Fixes: 561c1cf1 ("pinctrl: sunxi: Add support for the Allwinner H616-R pin controller") Signed-off-by:
Andre Przywara <andre.przywara@arm.com> Acked-by:
Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20210722132548.22121-1-andre.przywara@arm.com Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit 21b52fed ] rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: 291d1e72 ("net: dsa: sja1105: Add support for FDB and MDB management") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit 871a73a1 ] rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: 58c59ef9 ("net: dsa: lantiq: Add Forwarding Database access") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit ada2fee1 ] rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: ab335349 ("net: dsa: lan9303: Add port_fast_age and port_fdb_dump methods") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit cd391280 ] rtnl_fdb_dump() has logic to split a dump of PF_BRIDGE neighbors into multiple netlink skbs if the buffer provided by user space is too small (one buffer will typically handle a few hundred FDB entries). When the current buffer becomes full, nlmsg_put() in dsa_slave_port_fdb_do_dump() returns -EMSGSIZE and DSA saves the index of the last dumped FDB entry, returns to rtnl_fdb_dump() up to that point, and then the dump resumes on the same port with a new skb, and FDB entries up to the saved index are simply skipped. Since dsa_slave_port_fdb_do_dump() is pointed to by the "cb" passed to drivers, then drivers must check for the -EMSGSIZE error code returned by it. Otherwise, when a netlink skb becomes full, DSA will no longer save newly dumped FDB entries to it, but the driver will continue dumping. So FDB entries will be missing from the dump. Fix the broken backpressure by propagating the "cb" return code and allow rtnl_fdb_dump() to restart the FDB dump with a new skb. Fixes: e4b27ebc ("net: dsa: Add DSA driver for Hirschmann Hellcreek switches") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by:
Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 4a2b285e ] Fix the data-race reported by syzbot [1] Issue here is that igmp_ifc_timer_expire() can update in_dev->mr_ifc_count while another change just occured from another context. in_dev->mr_ifc_count is only 8bit wide, so the race had little consequences. [1] BUG: KCSAN: data-race in igmp_ifc_event / igmp_ifc_timer_expire write to 0xffff8881051e3062 of 1 bytes by task 12547 on cpu 0: igmp_ifc_event+0x1d5/0x290 net/ipv4/igmp.c:821 igmp_group_added+0x462/0x490 net/ipv4/igmp.c:1356 ____ip_mc_inc_group+0x3ff/0x500 net/ipv4/igmp.c:1461 __ip_mc_join_group+0x24d/0x2c0 net/ipv4/igmp.c:2199 ip_mc_join_group_ssm+0x20/0x30 net/ipv4/igmp.c:2218 do_ip_setsockopt net/ipv4/ip_sockglue.c:1285 [inline] ip_setsockopt+0x1827/0x2a80 net/ipv4/ip_sockglue.c:1423 tcp_setsockopt+0x8c/0xa0 net/ipv4/tcp.c:3657 sock_common_setsockopt+0x5d/0x70 net/core/sock.c:3362 __sys_setsockopt+0x18f/0x200 net/socket.c:2159 __do_sys_setsockopt net/socket.c:2170 [inline] __se_sys_setsockopt net/socket.c:2167 [inline] __x64_sys_setsockopt+0x62/0x70 net/socket.c:2167 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff8881051e3062 of 1 bytes by interrupt on cpu 1: igmp_ifc_timer_expire+0x706/0xa30 net/ipv4/igmp.c:808 call_timer_fn+0x2e/0x1d0 kernel/time/timer.c:1419 expire_timers+0x135/0x250 kernel/time/timer.c:1464 __run_timers+0x358/0x420 kernel/time/timer.c:1732 run_timer_softirq+0x19/0x30 kernel/time/timer.c:1745 __do_softirq+0x12c/0x26e kernel/softirq.c:558 invoke_softirq kernel/softirq.c:432 [inline] __irq_exit_rcu+0x9a/0xb0 kernel/softirq.c:636 sysvec_apic_timer_interrupt+0x69/0x80 arch/x86/kernel/apic/apic.c:1100 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638 console_unlock+0x8e8/0xb30 kernel/printk/printk.c:2646 vprintk_emit+0x125/0x3d0 kernel/printk/printk.c:2174 vprintk_default+0x22/0x30 kernel/printk/printk.c:2185 vprintk+0x15a/0x170 kernel/printk/printk_safe.c:392 printk+0x62/0x87 kernel/printk/printk.c:2216 selinux_netlink_send+0x399/0x400 security/selinux/hooks.c:6041 security_netlink_send+0x42/0x90 security/security.c:2070 netlink_sendmsg+0x59e/0x7c0 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:703 [inline] sock_sendmsg net/socket.c:723 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2392 ___sys_sendmsg net/socket.c:2446 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2475 __do_sys_sendmsg net/socket.c:2484 [inline] __se_sys_sendmsg net/socket.c:2482 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2482 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3d/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x01 -> 0x02 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 12539 Comm: syz-executor.1 Not tainted 5.14.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Takeshi Misawa authored
[ Upstream commit 1090340f ] If IEEE-802.15.4-RAW is closed before receive skb, skb is leaked. Fix this, by freeing sk_receive_queue in sk->sk_destruct(). syzbot report: BUG: memory leak unreferenced object 0xffff88810f644600 (size 232): comm "softirq", pid 0, jiffies 4294967032 (age 81.270s) hex dump (first 32 bytes): 10 7d 4b 12 81 88 ff ff 10 7d 4b 12 81 88 ff ff .}K......}K..... 00 00 00 00 00 00 00 00 40 7c 4b 12 81 88 ff ff ........@|K..... backtrace: [<ffffffff83651d4a>] skb_clone+0xaa/0x2b0 net/core/skbuff.c:1496 [<ffffffff83fe1b80>] ieee802154_raw_deliver net/ieee802154/socket.c:369 [inline] [<ffffffff83fe1b80>] ieee802154_rcv+0x100/0x340 net/ieee802154/socket.c:1070 [<ffffffff8367cc7a>] __netif_receive_skb_one_core+0x6a/0xa0 net/core/dev.c:5384 [<ffffffff8367cd07>] __netif_receive_skb+0x27/0xa0 net/core/dev.c:5498 [<ffffffff8367cdd9>] netif_receive_skb_internal net/core/dev.c:5603 [inline] [<ffffffff8367cdd9>] netif_receive_skb+0x59/0x260 net/core/dev.c:5662 [<ffffffff83fe6302>] ieee802154_deliver_skb net/mac802154/rx.c:29 [inline] [<ffffffff83fe6302>] ieee802154_subif_frame net/mac802154/rx.c:102 [inline] [<ffffffff83fe6302>] __ieee802154_rx_handle_packet net/mac802154/rx.c:212 [inline] [<ffffffff83fe6302>] ieee802154_rx+0x612/0x620 net/mac802154/rx.c:284 [<ffffffff83fe59a6>] ieee802154_tasklet_handler+0x86/0xa0 net/mac802154/main.c:35 [<ffffffff81232aab>] tasklet_action_common.constprop.0+0x5b/0x100 kernel/softirq.c:557 [<ffffffff846000bf>] __do_softirq+0xbf/0x2ab kernel/softirq.c:345 [<ffffffff81232f4c>] do_softirq kernel/softirq.c:248 [inline] [<ffffffff81232f4c>] do_softirq+0x5c/0x80 kernel/softirq.c:235 [<ffffffff81232fc1>] __local_bh_enable_ip+0x51/0x60 kernel/softirq.c:198 [<ffffffff8367a9a4>] local_bh_enable include/linux/bottom_half.h:32 [inline] [<ffffffff8367a9a4>] rcu_read_unlock_bh include/linux/rcupdate.h:745 [inline] [<ffffffff8367a9a4>] __dev_queue_xmit+0x7f4/0xf60 net/core/dev.c:4221 [<ffffffff83fe2db4>] raw_sendmsg+0x1f4/0x2b0 net/ieee802154/socket.c:295 [<ffffffff8363af16>] sock_sendmsg_nosec net/socket.c:654 [inline] [<ffffffff8363af16>] sock_sendmsg+0x56/0x80 net/socket.c:674 [<ffffffff8363deec>] __sys_sendto+0x15c/0x200 net/socket.c:1977 [<ffffffff8363dfb6>] __do_sys_sendto net/socket.c:1989 [inline] [<ffffffff8363dfb6>] __se_sys_sendto net/socket.c:1985 [inline] [<ffffffff8363dfb6>] __x64_sys_sendto+0x26/0x30 net/socket.c:1985 Fixes: 9ec76716 ("net: add IEEE 802.15.4 socket family implementation") Reported-and-tested-by:
<syzbot+1f68113fa907bf0695a8@syzkaller.appspotmail.com> Signed-off-by:
Takeshi Misawa <jeliantsurux@gmail.com> Acked-by:
Alexander Aring <aahringo@redhat.com> Link: https://lore.kernel.org/r/20210805075414.GA15796@DESKTOP Signed-off-by:
Stefan Schmidt <stefan@datenfreihafen.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ben Hutchings authored
[ Upstream commit 411d466d ] The magic number 4 in VLAN table lookup was the number of entries we can read and write at once. Using phy_port_cnt here doesn't make sense and presumably broke VLAN filtering for 3-port switches. Change it back to 4. Fixes: 4ce2a984 ("net: dsa: microchip: ksz8795: use phy_port_cnt ...") Signed-off-by:
Ben Hutchings <ben.hutchings@mind.be> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ben Hutchings authored
[ Upstream commit 16484413 ] Currently ksz8_port_vlan_filtering() sets or clears the VLAN Enable hardware flag. That controls discarding of packets with a VID that has not been enabled for any port on the switch. Since it is a global flag, set the dsa_switch::vlan_filtering_is_global flag so that the DSA core understands this can't be controlled per port. When VLAN filtering is enabled, the switch should also discard packets with a VID that's not enabled on the ingress port. Set or clear each external port's VLAN Ingress Filter flag in ksz8_port_vlan_filtering() to make that happen. Fixes: e66f840c ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by:
Ben Hutchings <ben.hutchings@mind.be> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ben Hutchings authored
[ Upstream commit 9130c2d3 ] On the CPU port, we can support both tagged and untagged VLANs at the same time by doing any necessary untagging in software rather than hardware. To enable that, keep the CPU port's Remove Tag flag cleared and set the dsa_switch::untag_bridge_pvid flag. Fixes: e66f840c ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by:
Ben Hutchings <ben.hutchings@mind.be> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ben Hutchings authored
[ Upstream commit af01754f ] When a VLAN is deleted from a port, the flags in struct switchdev_obj_port_vlan are always 0. ksz8_port_vlan_del() copies the BRIDGE_VLAN_INFO_UNTAGGED flag to the port's Tag Removal flag, and therefore always clears it. In case there are multiple VLANs configured as untagged on this port - which seems useless, but is allowed - deleting one of them changes the remaining VLANs to be tagged. It's only ever necessary to change this flag when a VLAN is added to the port, so leave it unchanged in ksz8_port_vlan_del(). Fixes: e66f840c ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by:
Ben Hutchings <ben.hutchings@mind.be> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ben Hutchings authored
[ Upstream commit 8f4f58f8 ] The switches supported by ksz8795 only have a per-port flag for Tag Removal. This means it is not possible to support both tagged and untagged VLANs on the same port. Reject attempts to add a VLAN that requires the flag to be changed, unless there are no VLANs currently configured. VID 0 is excluded from this check since it is untagged regardless of the state of the flag. On the CPU port we could support tagged and untagged VLANs at the same time. This will be enabled by a later patch. Fixes: e66f840c ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by:
Ben Hutchings <ben.hutchings@mind.be> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ben Hutchings authored
[ Upstream commit ef3b02a1 ] ksz8795 has never actually enabled PVID tag insertion, and it also programmed the PVID incorrectly. To fix this: * Allow tag insertion to be controlled per ingress port. On most chips, set bit 2 in Global Control 19. On KSZ88x3 this control flag doesn't exist. * When adding a PVID: - Set the appropriate register bits to enable tag insertion on egress at every other port if this was the packet's ingress port. - Mask *out* the VID from the default tag, before or-ing in the new PVID. * When removing a PVID: - Clear the same control bits to disable tag insertion. - Don't update the default tag. This wasn't doing anything useful. Fixes: e66f840c ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by:
Ben Hutchings <ben.hutchings@mind.be> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ben Hutchings authored
[ Upstream commit c34f674c ] ksz_read64() currently does some dubious byte-swapping on the two halves of a 64-bit register, and then only returns the high bits. Replace this with a straightforward expression. Fixes: e66f840c ("net: dsa: ksz: Add Microchip KSZ8795 DSA driver") Signed-off-by:
Ben Hutchings <ben.hutchings@mind.be> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yonghong Song authored
[ Upstream commit a2baf4e8 ] Commit b910eaaa ("bpf: Fix NULL pointer dereference in bpf_get_local_storage() helper") fixed a bug for bpf_get_local_storage() helper so different tasks won't mess up with each other's percpu local storage. The percpu data contains 8 slots so it can hold up to 8 contexts (same or different tasks), for 8 different program runs, at the same time. This in general is sufficient. But our internal testing showed the following warning multiple times: [...] warning: WARNING: CPU: 13 PID: 41661 at include/linux/bpf-cgroup.h:193 __cgroup_bpf_run_filter_sock_ops+0x13e/0x180 RIP: 0010:__cgroup_bpf_run_filter_sock_ops+0x13e/0x180 <IRQ> tcp_call_bpf.constprop.99+0x93/0xc0 tcp_conn_request+0x41e/0xa50 ? tcp_rcv_state_process+0x203/0xe00 tcp_rcv_state_process+0x203/0xe00 ? sk_filter_trim_cap+0xbc/0x210 ? tcp_v6_inbound_md5_hash.constprop.41+0x44/0x160 tcp_v6_do_rcv+0x181/0x3e0 tcp_v6_rcv+0xc65/0xcb0 ip6_protocol_deliver_rcu+0xbd/0x450 ip6_input_finish+0x11/0x20 ip6_input+0xb5/0xc0 ip6_sublist_rcv_finish+0x37/0x50 ip6_sublist_rcv+0x1dc/0x270 ipv6_list_rcv+0x113/0x140 __netif_receive_skb_list_core+0x1a0/0x210 netif_receive_skb_list_internal+0x186/0x2a0 gro_normal_list.part.170+0x19/0x40 napi_complete_done+0x65/0x150 mlx5e_napi_poll+0x1ae/0x680 __napi_poll+0x25/0x120 net_rx_action+0x11e/0x280 __do_softirq+0xbb/0x271 irq_exit_rcu+0x97/0xa0 common_interrupt+0x7f/0xa0 </IRQ> asm_common_interrupt+0x1e/0x40 RIP: 0010:bpf_prog_1835a9241238291a_tw_egress+0x5/0xbac ? __cgroup_bpf_run_filter_skb+0x378/0x4e0 ? do_softirq+0x34/0x70 ? ip6_finish_output2+0x266/0x590 ? ip6_finish_output+0x66/0xa0 ? ip6_output+0x6c/0x130 ? ip6_xmit+0x279/0x550 ? ip6_dst_check+0x61/0xd0 [...] Using drgn [0] to dump the percpu buffer contents showed that on this CPU slot 0 is still available, but slots 1-7 are occupied and those tasks in slots 1-7 mostly don't exist any more. So we might have issues in bpf_cgroup_storage_unset(). Further debugging confirmed that there is a bug in bpf_cgroup_storage_unset(). Currently, it tries to unset "current" slot with searching from the start. So the following sequence is possible: 1. A task is running and claims slot 0 2. Running BPF program is done, and it checked slot 0 has the "task" and ready to reset it to NULL (not yet). 3. An interrupt happens, another BPF program runs and it claims slot 1 with the *same* task. 4. The unset() in interrupt context releases slot 0 since it matches "task". 5. Interrupt is done, the task in process context reset slot 0. At the end, slot 1 is not reset and the same process can continue to occupy slots 2-7 and finally, when the above step 1-5 is repeated again, step 3 BPF program won't be able to claim an empty slot and a warning will be issued. To fix the issue, for unset() function, we should traverse from the last slot to the first. This way, the above issue can be avoided. The same reverse traversal should also be done in bpf_get_local_storage() helper itself. Otherwise, incorrect local storage may be returned to BPF program. [0] https://github.com/osandov/drgn Fixes: b910eaaa ("bpf: Fix NULL pointer dereference in bpf_get_local_storage() helper") Signed-off-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20210810010413.1976277-1-yhs@fb.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Miklos Szeredi authored
[ Upstream commit 9b91b6b0 ] There's possibility of an ABBA deadlock in case of a splice write to an overlayfs file and a concurrent splice write to a corresponding real file. The call chain for splice to an overlay file: -> do_splice [takes sb_writers on overlay file] -> do_splice_from -> iter_file_splice_write [takes pipe->mutex] -> vfs_iter_write ... -> ovl_write_iter [takes sb_writers on real file] And the call chain for splice to a real file: -> do_splice [takes sb_writers on real file] -> do_splice_from -> iter_file_splice_write [takes pipe->mutex] Syzbot successfully bisected this to commit 82a763e6 ("ovl: simplify file splice"). Fix by reverting the write part of the above commit and by adding missing bits from ovl_write_iter() into ovl_splice_write(). Fixes: 82a763e6 ("ovl: simplify file splice") Reported-and-tested-by:
<syzbot+579885d1a9a833336209@syzkaller.appspotmail.com> Signed-off-by:
Miklos Szeredi <mszeredi@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christian Hewitt authored
[ Upstream commit bf33677a ] Add support for the OSD1 HDR registers so meson DRM can handle the HDR properties set by Amlogic u-boot on G12A and newer devices which result in blue/green/pink colour distortion to display output. This takes the original patch submissions from Mathias [0] and [1] with corrections for formatting and the missing description and attribution needed for merge. [0] https://lore.kernel.org/linux-amlogic/59dfd7e6-fc91-3d61-04c4-94e078a3188c@baylibre.com/T/ [1] https://lore.kernel.org/linux-amlogic/CAOKfEHBx_fboUqkENEMd-OC-NSrf46nto+vDLgvgttzPe99kXg@mail.gmail.com/T/#u Fixes: 72888394 ("drm/meson: Add G12A Support for VIU setup") Suggested-by:
Mathias Steiger <mathias.steiger@googlemail.com> Signed-off-by:
Christian Hewitt <christianshewitt@gmail.com> Tested-by:
Neil Armstrong <narmstrong@baylibre.com> Tested-by:
Philip Milev <milev.philip@gmail.com> [narmsrong: adding missing space on second tested-by tag] Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210806094005.7136-1-christianshewitt@gmail.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Aya Levin authored
[ Upstream commit bd37c288 ] Check return value of mlx5_fw_tracer_start(), set error path and fix return value of mlx5_fw_tracer_init() accordingly. Fixes: c71ad41c ("net/mlx5: FW tracer, events handling") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Shay Drory authored
[ Upstream commit 563476ae ] The CQ destroy is performed based on the IRQ number that is stored in cq->irqn. That number wasn't set explicitly during CQ creation and as expected some of the API users of mlx5_core_create_cq() forgot to update it. This caused to wrong synchronization call of the wrong IRQ with a number 0 instead of the real one. As a fix, set the IRQ number directly in the mlx5_core_create_cq() and update all users accordingly. Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Fixes: ef1659ad ("IB/mlx5: Add DEVX support for CQ events") Signed-off-by:
Shay Drory <shayd@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chris Mi authored
[ Upstream commit 88bbd7b2 ] Free the offload sample action on error. Fixes: f94d6389 ("net/mlx5e: TC, Add support to offload sample action") Signed-off-by:
Chris Mi <cmi@nvidia.com> Reviewed-by:
Oz Shlomo <ozsh@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Aya Levin authored
[ Upstream commit c85a6b8f ] Since switchdev mode can't support devlink traps, verify there are no active devlink traps before moving eswitch to switchdev mode. If there are active traps, prevent the switchdev mode configuration. Fixes: eb3862a0 ("net/mlx5e: Enable traps according to link state") Signed-off-by:
Aya Levin <ayal@nvidia.com> Reviewed-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Maxim Mikityanskiy authored
[ Upstream commit 8ba3e4c8 ] mlx5e_close_xdpsq does the cleanup: it calls mlx5e_free_xdpsq_descs to free the outstanding descriptors, which relies on mlx5e_page_release_dynamic and page_pool_release_page. However, page_pool_destroy is already called by this point, because mlx5e_close_rq runs before mlx5e_close_xdpsq. This commit fixes the use-after-free by swapping mlx5e_close_xdpsq and mlx5e_close_rq. The commit cited below started calling page_pool_destroy directly from the driver. Previously, the page pool was destroyed under a call_rcu from xdp_rxq_info_unreg_mem_model, which would defer the deallocation until after the XDPSQ is cleaned up. Fixes: 1da4bbef ("net: core: page_pool: add user refcnt and reintroduce page_pool_destroy") Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by:
Tariq Toukan <tariqt@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Roi Dayan authored
[ Upstream commit c623c95a ] It could be local and remote are on the same machine and the route result will be a local route which will result in creating encap id with src/dst mac address of 0. Fixes: a54e20b4 ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads") Signed-off-by:
Roi Dayan <roid@nvidia.com> Reviewed-by:
Maor Dickman <maord@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Alex Vesker authored
[ Upstream commit d3875924 ] While processing encapsulated packet on RX, one of the fields that is checked is the inner packet length. If the length as specified in the header doesn't match the actual inner packet length, the packet is invalid and should be dropped. However, such packet caused the NIC to hang. This patch turns on a 'fail_on_error' HW bit which allows HW to drop such an invalid packet while processing RX packet and trying to decap it. Fixes: ad17dc8c ("net/mlx5: DR, Move STEv0 action apply logic") Signed-off-by:
Alex Vesker <valex@nvidia.com> Signed-off-by:
Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Leon Romanovsky authored
[ Upstream commit c633e799 ] Clean SF resources if mlx5 eth failed to initialize. Fixes: 1958fc2f ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by:
Leon Romanovsky <leonro@nvidia.com> Reviewed-by:
Parav Pandit <parav@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hao Xu authored
[ Upstream commit 47cae0c7 ] There may be cases like: A B spin_lock(wqe->lock) nr_workers is 0 nr_workers++ spin_unlock(wqe->lock) spin_lock(wqe->lock) nr_wokers is 1 nr_workers++ spin_unlock(wqe->lock) create_io_worker() acct->worker is 1 create_io_worker() acct->worker is 1 There should be one worker marked IO_WORKER_F_FIXED, but no one is. Fix this by introduce a new agrument for create_io_worker() to indicate if it is the first worker. Fixes: 3d4e4fac ("io-wq: fix no lock protection of acct->nr_worker") Signed-off-by:
Hao Xu <haoxu@linux.alibaba.com> Link: https://lore.kernel.org/r/20210808135434.68667-3-haoxu@linux.alibaba.com Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hao Xu authored
[ Upstream commit 49e7f0c7 ] The former patch to add check between nr_workers and max_workers has a bug, which will cause unconditionally creating io-workers. That's because the result of the check doesn't affect the call of create_io_worker(), fix it by bringing in a boolean value for it. Fixes: 21698274 ("io-wq: fix lack of acct->nr_workers < acct->max_workers judgement") Signed-off-by:
Hao Xu <haoxu@linux.alibaba.com> Link: https://lore.kernel.org/r/20210808135434.68667-2-haoxu@linux.alibaba.com [axboe: drop hunk that isn't strictly needed] Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guillaume Nault authored
[ Upstream commit 143a8526 ] Data beyond the UDP header might not be part of the skb's linear data. Use skb_copy_bits() instead of direct access to skb->data+X, so that we read the correct bytes even on a fragmented skb. Fixes: 4b5f6723 ("net: Special handling for IP & MPLS.") Signed-off-by:
Guillaume Nault <gnault@redhat.com> Link: https://lore.kernel.org/r/7741c46545c6ef02e70c80a9b32814b22d9616b3.1628264975.git.gnault@redhat.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Roi Dayan authored
[ Upstream commit beb7f2de ] Without this there is a warning if source files include psample.h before skbuff.h or doesn't include it at all. Fixes: 6ae0a628 ("net: Introduce psample, a new genetlink channel for packet sampling") Signed-off-by:
Roi Dayan <roid@nvidia.com> Link: https://lore.kernel.org/r/20210808065242.1522535-1-roid@nvidia.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Md Fahad Iqbal Polash authored
[ Upstream commit a7550f8b ] iavf driver should set RSS LUT and key unconditionally in reset path. Currently, the driver does not do that. This patch fixes this issue. Fixes: 2c86ac3c ("i40evf: create a generic config RSS function") Signed-off-by:
Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Brett Creeley authored
[ Upstream commit 3ba7f53f ] In some circumstances, such as with bridging, it's possible that the stack will add the device's own MAC address to its unicast address list. If, later, the stack deletes this address, the driver will receive a request to remove this address. The driver stores its current MAC address as part of the VSI MAC filter list instead of separately. So, this causes a problem when the device's MAC address is deleted unexpectedly, which results in traffic failure in some cases. The following configuration steps will reproduce the previously mentioned problem: > ip link set eth0 up > ip link add dev br0 type bridge > ip link set br0 up > ip addr flush dev eth0 > ip link set eth0 master br0 > echo 1 > /sys/class/net/br0/bridge/vlan_filtering > modprobe -r veth > modprobe -r bridge > ip addr add 192.168.1.100/24 dev eth0 The following ping command fails due to the netdev->dev_addr being deleted when removing the bridge module. > ping <link partner> Fix this by making sure to not delete the netdev->dev_addr during MAC address sync. After fixing this issue it was noticed that the netdev_warn() in .set_mac was overly verbose, so make it at netdev_dbg(). Also, there is a possibility of a race condition between .set_mac and .set_rx_mode. Fix this by calling netif_addr_lock_bh() and netif_addr_unlock_bh() on the device's netdev when the netdev->dev_addr is going to be updated in .set_mac. Fixes: e94d4478 ("ice: Implement filter sync, NDO operations and bump version") Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Tested-by:
Liang Li <liali@redhat.com> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Anirudh Venkataramanan authored
[ Upstream commit c503e632 ] When VFs are setup and torn down in quick succession, it is possible that a VF is torn down by the PF while the VF's virtchnl requests are still in the PF's mailbox ring. Processing the VF's virtchnl request when the VF itself doesn't exist results in undefined behavior. Fix this by adding a check to stop processing virtchnl requests when VF teardown is in progress. Fixes: ddf30f7f ("ice: Add handler to configure SR-IOV") Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Anirudh Venkataramanan authored
[ Upstream commit 50ac7479 ] The userspace utility "driverctl" can be used to change/override the system's default driver choices. This is useful in some situations (buggy driver, old driver missing a device ID, trying a workaround, etc.) where the user needs to load a different driver. However, this is also prone to user error, where a driver is mapped to a device it's not designed to drive. For example, if the ice driver is mapped to driver iavf devices, the ice driver crashes. Add a check to return an error if the ice driver is being used to probe a virtual function. Fixes: 837f08fd ("ice: Add basic driver framework for Intel(R) E800 Series") Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Gurucharan G <gurucharanx.g@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hangbin Liu authored
[ Upstream commit d09c548d ] When mirror/redirect a skb to a different port, the ct info should be reset for reclassification. Or the pkts will match unexpected rules. For example, with following topology and commands: ----------- | veth0 -+------- | veth1 -+------- | ------------ tc qdisc add dev veth0 clsact # The same with "action mirred egress mirror dev veth1" or "action mirred ingress redirect dev veth1" tc filter add dev veth0 egress chain 1 protocol ip flower ct_state +trk action mirred ingress mirror dev veth1 tc filter add dev veth0 egress chain 0 protocol ip flower ct_state -inv action ct commit action goto chain 1 tc qdisc add dev veth1 clsact tc filter add dev veth1 ingress chain 0 protocol ip flower ct_state +trk action drop ping <remove ip via veth0> & tc -s filter show dev veth1 ingress With command 'tc -s filter show', we can find the pkts were dropped on veth1. Fixes: b57dc7c1 ("net/sched: Introduce action ct") Signed-off-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guvenc Gulce authored
[ Upstream commit 64513d26 ] SMC clients may be assigned to a different link after the initial connection between two peers was established. In such a case, the connection counter was not correctly set. Update the connection counter correctly when a smc client connection is assigned to a different smc link. Fixes: 07d51580 ("net/smc: Add connection counters for links") Signed-off-by:
Guvenc Gulce <guvenc@linux.ibm.com> Tested-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Karsten Graul authored
[ Upstream commit 8f3d65c1 ] There can be a race between the waiters for a tx work request buffer and the link down processing that finally clears the link. Although all waiters are woken up before the link is cleared there might be waiters which did not yet get back control and are still waiting. This results in an access to a cleared wait queue head. Fix this by introducing atomic reference counting around the wait calls, and wait with the link clear processing until all waiters have finished. Move the work request layer related calls into smc_wr.c and set the link state to INACTIVE before calling smcr_link_clear() in smc_llc_srv_add_link(). Fixes: 15e1b99a ("net/smc: no WR buffer wait for terminating link group") Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
Guvenc Gulce <guvenc@linux.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-