- Jun 30, 2021
-
-
Petr Mladek authored
kthread: prevent deadlock when kthread_mod_delayed_work() races with kthread_cancel_delayed_work_sync() commit 5fa54346 upstream. The system might hang with the following backtrace: schedule+0x80/0x100 schedule_timeout+0x48/0x138 wait_for_common+0xa4/0x134 wait_for_completion+0x1c/0x2c kthread_flush_work+0x114/0x1cc kthread_cancel_work_sync.llvm.16514401384283632983+0xe8/0x144 kthread_cancel_delayed_work_sync+0x18/0x2c xxxx_pm_notify+0xb0/0xd8 blocking_notifier_call_chain_robust+0x80/0x194 pm_notifier_call_chain_robust+0x28/0x4c suspend_prepare+0x40/0x260 enter_state+0x80/0x3f4 pm_suspend+0x60/0xdc state_store+0x108/0x144 kobj_attr_store+0x38/0x88 sysfs_kf_write+0x64/0xc0 kernfs_fop_write_iter+0x108/0x1d0 vfs_write+0x2f4/0x368 ksys_write+0x7c/0xec It is caused by the following race between kthread_mod_delayed_work() and kthread_cancel_delayed_work_sync(): CPU0 CPU1 Context: Thread A Context: Thread B kthread_mod_delayed_work() spin_lock() __kthread_cancel_work() spin_unlock() del_timer_sync() kthread_cancel_delayed_work_sync() spin_lock() __kthread_cancel_work() spin_unlock() del_timer_sync() spin_lock() work->canceling++ spin_unlock spin_lock() queue_delayed_work() // dwork is put into the worker->delayed_work_list spin_unlock() kthread_flush_work() // flush_work is put at the tail of the dwork wait_for_completion() Context: IRQ kthread_delayed_work_timer_fn() spin_lock() list_del_init(&work->node); spin_unlock() BANG: flush_work is not longer linked and will never get proceed. The problem is that kthread_mod_delayed_work() checks work->canceling flag before canceling the timer. A simple solution is to (re)check work->canceling after __kthread_cancel_work(). But then it is not clear what should be returned when __kthread_cancel_work() removed the work from the queue (list) and it can't queue it again with the new @delay. The return value might be used for reference counting. The caller has to know whether a new work has been queued or an existing one was replaced. The proper solution is that kthread_mod_delayed_work() will remove the work from the queue (list) _only_ when work->canceling is not set. The flag must be checked after the timer is stopped and the remaining operations can be done under worker->lock. Note that kthread_mod_delayed_work() could remove the timer and then bail out. It is fine. The other canceling caller needs to cancel the timer as well. The important thing is that the queue (list) manipulation is done atomically under worker->lock. Link: https://lkml.kernel.org/r/20210610133051.15337-3-pmladek@suse.com Fixes: 9a6b06c8 ("kthread: allow to modify delayed kthread work") Signed-off-by:
Petr Mladek <pmladek@suse.com> Reported-by:
Martin Liu <liumartin@google.com> Cc: <jenhaochen@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Petr Mladek authored
commit 34b3d534 upstream. Patch series "kthread_worker: Fix race between kthread_mod_delayed_work() and kthread_cancel_delayed_work_sync()". This patchset fixes the race between kthread_mod_delayed_work() and kthread_cancel_delayed_work_sync() including proper return value handling. This patch (of 2): Simple code refactoring as a preparation step for fixing a race between kthread_mod_delayed_work() and kthread_cancel_delayed_work_sync(). It does not modify the existing behavior. Link: https://lkml.kernel.org/r/20210610133051.15337-2-pmladek@suse.com Signed-off-by:
Petr Mladek <pmladek@suse.com> Cc: <jenhaochen@google.com> Cc: Martin Liu <liumartin@google.com> Cc: Minchan Kim <minchan@google.com> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 4ca070ef upstream. The direction of the pipe argument must match the request-type direction bit or control requests may fail depending on the host-controller-driver implementation. Control transfers without a data stage are treated as OUT requests by the USB stack and should be using usb_sndctrlpipe(). Failing to do so will now trigger a warning. Fix the OSIFI2C_SET_BIT_RATE and OSIFI2C_STOP requests which erroneously used the osif_usb_read() helper and set the IN direction bit. Reported-by:
<syzbot+9d7dadd15b8819d73f41@syzkaller.appspotmail.com> Fixes: 83e53a8f ("i2c: Add bus driver for for OSIF USB i2c device.") Cc: stable@vger.kernel.org # 3.14 Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicholas Piggin authored
commit f8be156b upstream. It's possible to create a region which maps valid but non-refcounted pages (e.g., tail pages of non-compound higher order allocations). These host pages can then be returned by gfn_to_page, gfn_to_pfn, etc., family of APIs, which take a reference to the page, which takes it from 0 to 1. When the reference is dropped, this will free the page incorrectly. Fix this by only taking a reference on valid pages if it was non-zero, which indicates it is participating in normal refcounting (and can be released with put_page). This addresses CVE-2021-22543. Signed-off-by:
Nicholas Piggin <npiggin@gmail.com> Tested-by:
Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pavel Skripkin authored
[ Upstream commit 8fd0c1b0 ] My local syzbot instance hit memory leak in nilfs2. The problem was in missing kobject_put() in nilfs_sysfs_delete_device_group(). kobject_del() does not call kobject_cleanup() for passed kobject and it leads to leaking duped kobject name if kobject_put() was not called. Fail log: BUG: memory leak unreferenced object 0xffff8880596171e0 (size 8): comm "syz-executor379", pid 8381, jiffies 4294980258 (age 21.100s) hex dump (first 8 bytes): 6c 6f 6f 70 30 00 00 00 loop0... backtrace: kstrdup+0x36/0x70 mm/util.c:60 kstrdup_const+0x53/0x80 mm/util.c:83 kvasprintf_const+0x108/0x190 lib/kasprintf.c:48 kobject_set_name_vargs+0x56/0x150 lib/kobject.c:289 kobject_add_varg lib/kobject.c:384 [inline] kobject_init_and_add+0xc9/0x160 lib/kobject.c:473 nilfs_sysfs_create_device_group+0x150/0x800 fs/nilfs2/sysfs.c:999 init_nilfs+0xe26/0x12b0 fs/nilfs2/the_nilfs.c:637 Link: https://lkml.kernel.org/r/20210612140559.20022-1-paskripkin@gmail.com Fixes: da7141fb ("nilfs2: add /sys/fs/nilfs2/<device> group") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Acked-by:
Ryusuke Konishi <konishi.ryusuke@gmail.com> Cc: Michael L. Semon <mlsemon35@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Fabien Dessenne authored
[ Upstream commit 67e2996f ] Each GPIO bank supports a variable number of lines which is usually 16, but is less in some cases : this is specified by the last argument of the "gpio-ranges" bank node property. Report to the framework, the actual number of lines, so the libgpiod gpioinfo command lists the actually existing GPIO lines. Fixes: 1dc9d289 ("pinctrl: stm32: add possibility to use gpio-ranges to declare bank range") Signed-off-by:
Fabien Dessenne <fabien.dessenne@foss.st.com> Link: https://lore.kernel.org/r/20210617144629.2557693-1-fabien.dessenne@foss.st.com Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Esben Haabendal authored
[ Upstream commit f6396341 ] As documented in Documentation/networking/driver.rst, the ndo_start_xmit method must not return NETDEV_TX_BUSY under any normal circumstances, and as recommended, we simply stop the tx queue in advance, when there is a risk that the next xmit would cause a NETDEV_TX_BUSY return. Signed-off-by:
Esben Haabendal <esben@geanix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Esben Haabendal authored
[ Upstream commit 28d9fab4 ] Add a couple of memory-barriers to ensure correct ordering of read/write access to TX BDs. In xmit_done, we should ensure that reading the additional BD fields are only done after STS_CTRL_APP0_CMPLT bit is set. When xmit_done marks the BD as free by setting APP0=0, we need to ensure that the other BD fields are reset first, so we avoid racing with the xmit path, which writes to the same fields. Finally, making sure to read APP0 of next BD after the current BD, ensures that we see all available buffers. Signed-off-by:
Esben Haabendal <esben@geanix.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Mikel Rychliski authored
[ Upstream commit cacf994a ] Although the AMD RS690 chipset has 64-bit DMA support, BIOS implementations sometimes fail to configure the memory limit registers correctly. The Acer F690GVM mainboard uses this chipset and a Marvell 88E8056 NIC. The sky2 driver programs the NIC to use 64-bit DMA, which will not work: sky2 0000:02:00.0: error interrupt status=0x8 sky2 0000:02:00.0 eth0: tx timeout sky2 0000:02:00.0 eth0: transmit ring 0 .. 22 report=0 done=0 Other drivers required by this mainboard either don't support 64-bit DMA, or have it disabled using driver specific quirks. For example, the ahci driver has quirks to enable or disable 64-bit DMA depending on the BIOS version (see ahci_sb600_enable_64bit() in ahci.c). This ahci quirk matches against the SB600 SATA controller, but the real issue is almost certainly with the RS690 PCI host that it was commonly attached to. To avoid this issue in all drivers with 64-bit DMA support, fix the configuration of the PCI host. If the kernel is aware of physical memory above 4GB, but the BIOS never configured the PCI host with this information, update the registers with our values. [bhelgaas: drop PCI_DEVICE_ID_ATI_RS690 definition] Link: https://lore.kernel.org/r/20210611214823.4898-1-mikel@mikelr.com Signed-off-by:
Mikel Rychliski <mikel@mikelr.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Peter Zijlstra authored
[ Upstream commit fb780761 ] One should only use st_shndx when >SHN_UNDEF and <SHN_LORESERVE. When SHN_XINDEX, then use .symtab_shndx. Otherwise use 0. This handles the case: st_shndx >= SHN_LORESERVE && st_shndx != SHN_XINDEX. Link: https://lore.kernel.org/lkml/20210607023839.26387-1-mark-pk.tsai@mediatek.com/ Link: https://lkml.kernel.org/r/20210616154126.2794-1-mark-pk.tsai@mediatek.com Reported-by:
Mark-PK Tsai <mark-pk.tsai@mediatek.com> Tested-by:
Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> [handle endianness of sym->st_shndx] Signed-off-by:
Mark-PK Tsai <mark-pk.tsai@mediatek.com> Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kees Cook authored
[ Upstream commit 1c200f83 ] The source (&dcbx_info->operational.params) and dest (&p_hwfn->p_dcbx_info->set.config.params) are both struct qed_dcbx_params (560 bytes), not struct qed_dcbx_admin_params (564 bytes), which is used as the memcpy() size. However it seems that struct qed_dcbx_operational_params (dcbx_info->operational)'s layout matches struct qed_dcbx_admin_params (p_hwfn->p_dcbx_info->set.config)'s 4 byte difference (3 padding, 1 byte for "valid"). On the assumption that the size is wrong (rather than the source structure type), adjust the memcpy() size argument to be 4 bytes smaller and add a BUILD_BUG_ON() to validate any changes to the structure sizes. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Fuad Tabba authored
[ Upstream commit d8ac05ea ] KVM_CHECK_EXTENSION ioctl can return any negative value on error, and not necessarily -1. Change the assertion to reflect that. Signed-off-by:
Fuad Tabba <tabba@google.com> Message-Id: <20210615150443.1183365-1-tabba@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kees Cook authored
[ Upstream commit da5ac772 ] In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. The memcpy() is copying the entire structure, not just the first array. Adjust the source argument so the compiler can do appropriate bounds checking. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kees Cook authored
[ Upstream commit 224004fb ] In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. The memcpy() is copying the entire structure, not just the first array. Adjust the source argument so the compiler can do appropriate bounds checking. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kees Cook authored
[ Upstream commit 99718abd ] In preparation for FORTIFY_SOURCE performing compile-time and run-time field bounds checking for memcpy(), memmove(), and memset(), avoid intentionally reading across neighboring array fields. The memcpy() is copying the entire structure, not just the first array. Adjust the source argument so the compiler can do appropriate bounds checking. Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit e032f7c9 ] Like prior patch, we need to annotate lockless accesses to po->ifindex For instance, packet_getname() is reading po->ifindex (twice) while another thread is able to change po->ifindex. KCSAN reported: BUG: KCSAN: data-race in packet_do_bind / packet_getname write to 0xffff888143ce3cbc of 4 bytes by task 25573 on cpu 1: packet_do_bind+0x420/0x7e0 net/packet/af_packet.c:3191 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888143ce3cbc of 4 bytes by task 25578 on cpu 0: packet_getname+0x5b/0x1a0 net/packet/af_packet.c:3525 __sys_getsockname+0x10e/0x1a0 net/socket.c:1887 __do_sys_getsockname net/socket.c:1902 [inline] __se_sys_getsockname net/socket.c:1899 [inline] __x64_sys_getsockname+0x3e/0x50 net/socket.c:1899 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000001 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25578 Comm: syz-executor.5 Not tainted 5.13.0-rc6-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit c7d2ef5d ] tpacket_snd(), packet_snd(), packet_getname() and packet_seq_show() can read po->num without holding a lock. This means other threads can change po->num at the same time. KCSAN complained about this known fact [1] Add READ_ONCE()/WRITE_ONCE() to address the issue. [1] BUG: KCSAN: data-race in packet_do_bind / packet_sendmsg write to 0xffff888131a0dcc0 of 2 bytes by task 24714 on cpu 0: packet_do_bind+0x3ab/0x7e0 net/packet/af_packet.c:3181 packet_bind+0xc3/0xd0 net/packet/af_packet.c:3255 __sys_bind+0x200/0x290 net/socket.c:1637 __do_sys_bind net/socket.c:1648 [inline] __se_sys_bind net/socket.c:1646 [inline] __x64_sys_bind+0x3d/0x50 net/socket.c:1646 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888131a0dcc0 of 2 bytes by task 24719 on cpu 1: packet_snd net/packet/af_packet.c:2899 [inline] packet_sendmsg+0x317/0x3570 net/packet/af_packet.c:3040 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmsg+0x1ed/0x270 net/socket.c:2433 __do_sys_sendmsg net/socket.c:2442 [inline] __se_sys_sendmsg net/socket.c:2440 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2440 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x1200 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24719 Comm: syz-executor.5 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pavel Skripkin authored
[ Upstream commit 58af3d3d ] Syzbot reported memory leak in tty_init_dev(). The problem was in unputted tty in ldisc_open() static int ldisc_open(struct tty_struct *tty) { ... ser->tty = tty_kref_get(tty); ... result = register_netdevice(dev); if (result) { rtnl_unlock(); free_netdev(dev); return -ENODEV; } ... } Ser pointer is netdev private_data, so after free_netdev() this pointer goes away with unputted tty reference. So, fix it by adding tty_kref_put() before freeing netdev. Reported-and-tested-by:
<syzbot+f303e045423e617d2cad@syzkaller.appspotmail.com> Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Praneeth Bajjuri authored
[ Upstream commit da9ef50f ] Current logic is performing hard reset and causing the programmed registers to be wiped out. as per datasheet: https://www.ti.com/lit/ds/symlink/dp83867cr.pdf 8.6.26 Control Register (CTRL) do SW_RESTART to perform a reset not including the registers, If performed when link is already present, it will drop the link and trigger re-auto negotiation. Signed-off-by:
Praneeth Bajjuri <praneeth@ti.com> Signed-off-by:
Geet Modi <geet.modi@ti.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit b71eaed8 ] UDP sendmsg() path can be lockless, it is possible for another thread to re-connect an change sk->sk_txhash under us. There is no serious impact, but we can use READ_ONCE()/WRITE_ONCE() pair to document the race. BUG: KCSAN: data-race in __ip4_datagram_connect / skb_set_owner_w write to 0xffff88813397920c of 4 bytes by task 30997 on cpu 1: sk_set_txhash include/net/sock.h:1937 [inline] __ip4_datagram_connect+0x69e/0x710 net/ipv4/datagram.c:75 __ip6_datagram_connect+0x551/0x840 net/ipv6/datagram.c:189 ip6_datagram_connect+0x2a/0x40 net/ipv6/datagram.c:272 inet_dgram_connect+0xfd/0x180 net/ipv4/af_inet.c:580 __sys_connect_file net/socket.c:1837 [inline] __sys_connect+0x245/0x280 net/socket.c:1854 __do_sys_connect net/socket.c:1864 [inline] __se_sys_connect net/socket.c:1861 [inline] __x64_sys_connect+0x3d/0x50 net/socket.c:1861 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88813397920c of 4 bytes by task 31039 on cpu 0: skb_set_hash_from_sk include/net/sock.h:2211 [inline] skb_set_owner_w+0x118/0x220 net/core/sock.c:2101 sock_alloc_send_pskb+0x452/0x4e0 net/core/sock.c:2359 sock_alloc_send_skb+0x2d/0x40 net/core/sock.c:2373 __ip6_append_data+0x1743/0x21a0 net/ipv6/ip6_output.c:1621 ip6_make_skb+0x258/0x420 net/ipv6/ip6_output.c:1983 udpv6_sendmsg+0x160a/0x16b0 net/ipv6/udp.c:1527 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:642 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490 __do_sys_sendmmsg net/socket.c:2519 [inline] __se_sys_sendmmsg net/socket.c:2516 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xbca3c43d -> 0xfdb309e0 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 31039 Comm: syz-executor.2 Not tainted 5.13.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zheng Yongjun authored
[ Upstream commit 9d44fa3e ] Function 'ping_queue_rcv_skb' not always return success, which will also return fail. If not check the wrong return value of it, lead to function `ping_rcv` return success. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Austin Kim authored
[ Upstream commit 80ec82e3 ] Several ethtool functions leave heap uncleared (potentially) by drivers. This will leave the unused portion of heap unchanged and might copy the full contents back to userspace. Signed-off-by:
Austin Kim <austindh.kim@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Johannes Berg authored
[ Upstream commit a9799541 ] These are not permitted by the spec, just drop them. Link: https://lore.kernel.org/r/20210609161305.23def022b750.Ibd6dd3cdce573dae262fcdc47f8ac52b883a9c50@changeid Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zheng Yongjun authored
[ Upstream commit 5ac6b198 ] When 'nla_parse_nested_deprecated' failed, it's no need to BUG() here, return -EINVAL is ok. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guillaume Ranquet authored
[ Upstream commit 90415753 ] As recommended by the doc in: Documentation/drivers-api/dmaengine/provider.rst Use GFP_NOWAIT to not deplete the emergency pool. Signed-off-by:
Guillaume Ranquet <granquet@baylibre.com> Link: https://lore.kernel.org/r/20210513192642.29446-4-granquet@baylibre.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guillaume Ranquet authored
[ Upstream commit 2537b40b ] Avoid issuing a new desc if one is still being processed as this can lead to some desc never being marked as completed. Signed-off-by:
Guillaume Ranquet <granquet@baylibre.com> Link: https://lore.kernel.org/r/20210513192642.29446-3-granquet@baylibre.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Guillaume Ranquet authored
[ Upstream commit 0a2ff58f ] The desc_free handler assumed that the desc we want to free was always the current one associated with the channel. This is seldom the case and this is causing use after free crashes in multiple places (tx/rx/terminate...). BUG: KASAN: use-after-free in mtk_uart_apdma_rx_handler+0x120/0x304 Call trace: dump_backtrace+0x0/0x1b0 show_stack+0x24/0x34 dump_stack+0xe0/0x150 print_address_description+0x8c/0x55c __kasan_report+0x1b8/0x218 kasan_report+0x14/0x20 __asan_load4+0x98/0x9c mtk_uart_apdma_rx_handler+0x120/0x304 mtk_uart_apdma_irq_handler+0x50/0x80 __handle_irq_event_percpu+0xe0/0x210 handle_irq_event+0x8c/0x184 handle_fasteoi_irq+0x1d8/0x3ac __handle_domain_irq+0xb0/0x110 gic_handle_irq+0x50/0xb8 el0_irq_naked+0x60/0x6c Allocated by task 3541: __kasan_kmalloc+0xf0/0x1b0 kasan_kmalloc+0x10/0x1c kmem_cache_alloc_trace+0x90/0x2dc mtk_uart_apdma_prep_slave_sg+0x6c/0x1a0 mtk8250_dma_rx_complete+0x220/0x2e4 vchan_complete+0x290/0x340 tasklet_action_common+0x220/0x298 tasklet_action+0x28/0x34 __do_softirq+0x158/0x35c Freed by task 3541: __kasan_slab_free+0x154/0x224 kasan_slab_free+0x14/0x24 slab_free_freelist_hook+0xf8/0x15c kfree+0xb4/0x278 mtk_uart_apdma_desc_free+0x34/0x44 vchan_complete+0x1bc/0x340 tasklet_action_common+0x220/0x298 tasklet_action+0x28/0x34 __do_softirq+0x158/0x35c The buggy address belongs to the object at ffff000063606800 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 176 bytes inside of 256-byte region [ffff000063606800, ffff000063606900) The buggy address belongs to the page: page:fffffe00016d8180 refcount:1 mapcount:0 mapping:ffff00000302f600 index:0x0 compound_mapcount: 0 flags: 0xffff00000010200(slab|head) raw: 0ffff00000010200 dead000000000100 dead000000000122 ffff00000302f600 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Signed-off-by:
Guillaume Ranquet <granquet@baylibre.com> Link: https://lore.kernel.org/r/20210513192642.29446-2-granquet@baylibre.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zou Wei authored
[ Upstream commit dea8464d ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zou Wei <zou_wei@huawei.com> Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1622442963-54095-1-git-send-email-zou_wei@huawei.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Du Cheng authored
[ Upstream commit a64b6a25 ] If the userland switches back-and-forth between NL80211_IFTYPE_OCB and NL80211_IFTYPE_ADHOC via send_msg(NL80211_CMD_SET_INTERFACE), there is a chance where the cleanup cfg80211_leave_ocb() is not called. This leads to initialization of in-use memory (e.g. init u.ibss while in-use by u.ocb) due to a shared struct/union within ieee80211_sub_if_data: struct ieee80211_sub_if_data { ... union { struct ieee80211_if_ap ap; struct ieee80211_if_vlan vlan; struct ieee80211_if_managed mgd; struct ieee80211_if_ibss ibss; // <- shares address struct ieee80211_if_mesh mesh; struct ieee80211_if_ocb ocb; // <- shares address struct ieee80211_if_mntr mntr; struct ieee80211_if_nan nan; } u; ... } Therefore add handling of otype == NL80211_IFTYPE_OCB, during cfg80211_change_iface() to perform cleanup when leaving OCB mode. link to syzkaller bug: https://syzkaller.appspot.com/bug?id=0612dbfa595bf4b9b680ff7b4948257b8e3732d5 Reported-by:
<syzbot+105896fac213f26056f9@syzkaller.appspotmail.com> Signed-off-by:
Du Cheng <ducheng2@gmail.com> Link: https://lore.kernel.org/r/20210428063941.105161-1-ducheng2@gmail.com Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Johannes Berg authored
[ Upstream commit bd18de51 ] Syzbot reports that we may be able to get into a situation where mac80211 has pending ACK frames on shutdown with hwsim. It appears that the reason for this is that syzbot uses the wmediumd hooks to intercept/injection frames, and may shut down hwsim, removing the radio(s), while frames are pending in the air simulation. Clean out the pending queue when the interface is stopped, after this the frames can't be reported back to mac80211 properly anyway. Reported-by:
<syzbot+a063bbf0b15737362592@syzkaller.appspotmail.com> Link: https://lore.kernel.org/r/20210517170429.b0f85ab0eda1.Ie42a6ec6b940c971f3441286aeaaae2fe368e29a@changeid Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Johannes Berg authored
[ Upstream commit 0ee4d555 ] Syzbot reports that it's possible to hit this from userspace, by trying to add a station before any other connection setup has been done. Instead of trying to catch this in some other way simply remove the warning, that will appropriately reject the call from userspace. Reported-by:
<syzbot+7716dbc401d9a437890d@syzkaller.appspotmail.com> Link: https://lore.kernel.org/r/20210517164715.f537da276d17.Id05f40ec8761d6a8cc2df87f1aa09c651988a586@changeid Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yu Kuai authored
[ Upstream commit 8982d48a ] pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. Fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20210517081826.1564698-4-yukuai3@huawei.com Signed-off-by:
Vinod Koul <vkoul@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Rafael J. Wysocki authored
[ Upstream commit 4d6035f9 ] Revert commit 4514d991 ("PCI: PM: Do not read power state in pci_enable_device_flags()") that is reported to cause PCI device initialization issues on some systems. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213481 Link: https://lore.kernel.org/linux-acpi/YNDoGICcg0V8HhpQ@eldamar.lan Reported-by:
Michael <phyre@rogers.com> Reported-by:
Salvatore Bonaccorso <carnil@debian.org> Fixes: 4514d991 ("PCI: PM: Do not read power state in pci_enable_device_flags()") Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Haibo Chen authored
[ Upstream commit f422316c ] Move the register operation after the clock enable, otherwise system will stuck when this driver probe. Fixes: 71d80563 ("spi: spi-nxp-fspi: fix fspi panic by unexpected interrupts") Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1623317073-25158-1-git-send-email-haibo.chen@nxp.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nathan Chancellor authored
commit e607ff63 upstream. With the latest mkimage from U-Boot 2021.04, the generic defconfigs no longer build, failing with: /usr/bin/mkimage: verify_header failed for FIT Image support with exit code 1 This is expected after the linked U-Boot commits because '@' is forbidden in the node names due to the way that libfdt treats nodes with the same prefix but different unit addresses. Switch the '@' in the node name to '-'. Drop the unit addresses from the hash and kernel child nodes because there is only one node so they do not need to have a number to differentiate them. Cc: stable@vger.kernel.org Link: https://source.denx.de/u-boot/u-boot/-/commit/79af75f7776fc20b0d7eb6afe1e27c00fdb4b9b4 Link: https://source.denx.de/u-boot/u-boot/-/commit/3f04db891a353f4b127ed57279279f851c6b4917 Suggested-by:
Simon Glass <sjg@chromium.org> Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Reviewed-by:
Tom Rini <trini@konsulko.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> [nathan: Backport to 5.4, only apply to .its.S files that exist] Signed-off-by:
Nathan Chancellor <nathan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nick Desaulniers authored
commit 311bea3c upstream. With GNU binutils 2.35+, linking with BFD produces warnings for vmlinux: aarch64-linux-gnu-ld: warning: -z norelro ignored BFD can produce this warning when the target emulation mode does not support RELRO program headers, and -z relro or -z norelro is passed. Alan Modra clarifies: The default linker emulation for an aarch64-linux ld.bfd is -maarch64linux, the default for an aarch64-elf linker is -maarch64elf. They are not equivalent. If you choose -maarch64elf you get an emulation that doesn't support -z relro. The ARCH=arm64 kernel prefers -maarch64elf, but may fall back to -maarch64linux based on the toolchain configuration. LLD will always create RELRO program header regardless of target emulation. To avoid the above warning when linking with BFD, pass -z norelro only when linking with LLD or with -maarch64linux. Fixes: 3b92fa74 ("arm64: link with -z norelro regardless of CONFIG_RELOCATABLE") Fixes: 3bbd3db8 ("arm64: relocatable: fix inconsistencies in linker script and options") Cc: <stable@vger.kernel.org> # 5.0.x- Reported-by:
kernelci.org bot <bot@kernelci.org> Reported-by:
Quentin Perret <qperret@google.com> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Reviewed-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
Ard Biesheuvel <ardb@kernel.org> Cc: Alan Modra <amodra@gmail.com> Cc: Fāng-ruì Sòng <maskray@google.com> Link: https://lore.kernel.org/r/20201218002432.788499-1-ndesaulniers@google.com Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sami Tolvanen authored
commit b744b43f upstream. Similarly to the CC_IS_CLANG config, add LD_IS_LLD to avoid GNU ld specific logic such as ld-version or ld-ifversion and gain the ability to select potential features that depend on the linker at configuration time such as LTO. Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Acked-by:
Masahiro Yamada <masahiroy@kernel.org> [nc: Reword commit message] Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Tested-by:
Sedat Dilek <sedat.dilek@gmail.com> Reviewed-by:
Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Neil Armstrong authored
commit 103a5348 upstream. It has been reported that usage of memcpy() to/from an iomem mapping is invalid, and a recent arm64 memcpy update [1] triggers a memory abort when dram-access-quirk is used on the G12A/G12B platforms. This adds a local sg_copy_to_buffer which makes usage of io versions of memcpy when dram-access-quirk is enabled. [1] 28513304 ("arm64: Import latest memcpy()/memmove() implementation") Fixes: acdc8e71 ("mmc: meson-gx: add dram-access-quirk") Reported-by:
Marek Szyprowski <m.szyprowski@samsung.com> Suggested-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20210609150230.9291-1-narmstrong@baylibre.com Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit dad7b989 upstream. When building the kernel wtih gcc-10 or higher using the CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y flag, the compiler picks a slightly different set of registers for the inline assembly in cpu_init() that subsequently results in a corrupt kernel stack as well as remaining in FIQ mode. If a banked register is used for the last argument, the wrong version of that register gets loaded into CPSR_c. When building in Arm mode, the arguments are passed as immediate values and the bug cannot happen. This got introduced when Daniel reworked the FIQ handling and was technically always broken, but happened to work with both clang and gcc before gcc-10 as long as they picked one of the lower registers. This is probably an indication that still very few people build the kernel in Thumb2 mode. Marek pointed out the problem on IRC, Arnd narrowed it down to this inline assembly and Russell pinpointed the exact bug. Change the constraints to force the final mode switch to use a non-banked register for the argument to ensure that the correct constant gets loaded. Another alternative would be to always use registers for the constant arguments to avoid the #ifdef that has now become more complex. Cc: <stable@vger.kernel.org> # v3.18+ Cc: Daniel Thompson <daniel.thompson@linaro.org> Reported-by:
Marek Vasut <marek.vasut@gmail.com> Acked-by:
Ard Biesheuvel <ardb@kernel.org> Fixes: c0e7f7ee ("ARM: 8150/3: fiq: Replace default FIQ handler") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christian König authored
commit 4b41726a upstream. We actually need to wait for the moving fence after pinning the BO to make sure that the pin is completed. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> References: https://lore.kernel.org/dri-devel/20210621151758.2347474-1-daniel.vetter@ffwll.ch/ CC: stable@kernel.org Link: https://patchwork.freedesktop.org/patch/msgid/20210622114506.106349-2-christian.koenig@amd.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-