- May 23, 2020
-
-
Mark Starovoytov authored
This patch fixes an inconsistency between code and spec, which was found while working on the QoS implementation. When 8TCs are used, 2 is the maximum supported number of index bits. In a 4TC mode, we do support 3, but we shouldn't really use the bytes, which are intended for the 8TC mode. Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Starovoytov authored
This patch adds support for mqprio min_rate limiters. A2 HW supports Weighted Strict Priority (WSP) arbitration for Tx Descriptor Queue scheduling among TCs, which can be used for min_rate shaping. Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Starovoytov authored
This patch changes the order of arguments for TC weight/credit setter functions. Having the "value to be set" on the right is slightly more robust in a sense that it's more natural for the humans, so it's a bit more error-proof this way. Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Starovoytov authored
This patch changes the TC-queue mapping mechanism used on A2. Configure the A2 HW in such a way that we can keep queue index mapping exactly as it was on A1. Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Starovoytov authored
This patch adds support for automatic queue number downgrade. On A2: this is a must have, because only TC0/TC1 support more than 4Q. Other TCs support 4Qs maximum. Thus, on A2 we must downgrade the number of queues per TC to 4, if more than 2 TCs are requested. On A1: this allows using 8TCs even on systems with cpu count >= 8, when we have 8 queues by default. We will just automatically switch to 8TCx4Q mode in this case. Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Starovoytov authored
This patch adds initial support for mqprio rate limiters (max_rate only). Atlantic HW supports Rate-Shaping for time-sensitive traffic at per Traffic Class (TC) granularity. Target rate is defined by: * nominal link rate (always 10G); * rate factor (ratio between nominal rate and max allowed). Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Starovoytov authored
This patch updates TCVEC2RING to accept nic_cfg, which is needed to be able to use it from hw_atl. The name is updated to reflect the changes. Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mark Starovoytov authored
This patch adds support for per-TC queue statistics. By default (single TC), the output is the same as it used to be, e.g.: Queue[0] InPackets: 2 Queue[0] OutPackets: 8 Queue[0] Restarts: 0 Queue[0] InJumboPackets: 0 Queue[0] InLroPackets: 0 Queue[0] InErrors: 0 If several TCs are enabled, then each queue statistics line is prefixed with TC number, e.g.: TC0 Queue[0] InPackets: 6 TC0 Queue[0] OutPackets: 11 Queue numbering is end-to-end, so: TC1 Queue[4] InPackets: 0 TC1 Queue[4] OutPackets: 22 Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry Bezrukov authored
This patch adds multi-TC support. PTP is automatically disabled when the user enables more than 2 TCs, otherwise traffic on TC2 won't quite work, because it's reserved for PTP. Signed-off-by:
Dmitry Bezrukov <dbezrukov@marvell.com> Co-developed-by:
Dmitry Bogdanov <dbogdanov@marvell.com> Signed-off-by:
Dmitry Bogdanov <dbogdanov@marvell.com> Co-developed-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry Bezrukov authored
This patch contains the following changes: * add cfg->is_ptp (used for PTP enable/disable switch, which is described in more details below); * add cfg->tc_mode (A1 supports 2 HW modes only); * setup queue to TC mapping based on TC mode on A2; * remove hw_tx_tc_mode_get / hw_rx_tc_mode_get hw_ops. In the first generation of our hardware (A1), a whole traffic class is consumed for PTP handling in FW (FW uses it to send the ptp data and to send back timestamps). The 'is_ptp' flag introduced in this patch will be used in to automatically disable PTP when a conflicting configuration is detected, e.g. when multiple TCs are enabled. Signed-off-by:
Dmitry Bezrukov <dbezrukov@marvell.com> Co-developed-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry Bezrukov authored
This patch moves the PTP TC initialization into a separate function. Signed-off-by:
Dmitry Bezrukov <dbezrukov@marvell.com> Co-developed-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry Bezrukov authored
This patch contains the following changes: * access cfg via aq_nic_get_cfg() in aq_nic_start() and aq_nic_map_skb(); * call aq_nic_get_dev() just once in aq_nic_map_skb(); * move ring allocation/deallocation out of aq_vec_alloc()/aq_vec_free(); * add the missing aq_nic_deinit() in atl_resume_common(); * rename 'tcs' field to 'tcs_max' in aq_hw_caps_s to differentiate it from the 'tcs' field in aq_nic_cfg_s, which is used for the current number of TCs; * update _TC_MAX defines to the actual number of supported TCs; * move tx_tc_mode register defines slightly higher (just to keep the order of definitions); * separate variables for TX/RX buff_size in hw_atl*_hw_qos_set(); * use AQ_HW_*_TC instead of hardcoded magic numbers; * actually use the 'ret' value in aq_mdo_add_secy(); Signed-off-by:
Dmitry Bezrukov <dbezrukov@marvell.com> Co-developed-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
Igor Russkikh <irusskikh@marvell.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 100GbE Intel Wired LAN Driver Updates 2020-05-21 This series contains updates to ice driver only. Several of the changes are fixes, which could be backported to stable, of which, only one was marked for stable because of the memory leak potential. Jake exposes the information in the flash memory used for link management, which is called the netlist module. Henry and Tony add support for tunnel offloads. Brett adds promiscuous support in VF's which is based on VF trust and the new vf-true-promisc flag. Avinash fixes an issue where a transmit timeout for a queue that belongs to a PFC enabled TC is not a true transmit timeout, but because the PFC is in action. Dave fixes the check for contiguous TCs to allow for various UP2TC mapping configurations. Also fixed an issue when changing the pause parameters would could multiple link drop/down's in succession, which in turn caused the firmware to not generate a link interrupt for the driver to respond to. Anirudh (Ani) fixed a potential race condition in probe/open due to a bit being cleared too early. Lihong updates an error message to make it more meaningful instead of just printing out the numerical value of the status/error code. Also fixed an incorrect return value if deleting a filter does not find a match to delete or when adding a filter that already exists. Karol fixes casting issues and precision loss in the driver. Jesse make the sign usage more consistent in the driver by making sure all instances of vf_id are unsigned, since it can never be negative. Eric fixes a potential memory leak in ice_add_prof_id_vsig() where was not cleaning up resources properly when an error occurs. Michal to help organize the filtering code in the driver, refactor the code into a separate file and add functions to prepare the filter information. Bruce cleaned up a conditional statement that always resulted in true and provided a comment to make it more obvious. Also cleaned up redundant code checks. Tony helps with potential namespace issues by renaming a 'ice' specific function with the driver name prepended. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Roopa Prabhu says: ==================== Support for fdb ECMP nexthop groups This series introduces ecmp nexthops and nexthop groups for mac fdb entries. In subsequent patches this is used by the vxlan driver fdb entries. The use case is E-VPN multihoming [1,2,3] which requires bridged vxlan traffic to be load balanced to remote switches (vteps) belonging to the same multi-homed ethernet segment (This is analogous to a multi-homed LAG but over vxlan). Changes include new nexthop flag NHA_FDB for nexthops referenced by fdb entries. These nexthops only have ip. The patches make sure that routes dont reference such nexthops. example: $ip nexthop add id 12 via 172.16.1.2 fdb $ip nexthop add id 13 via 172.16.1.3 fdb $ip nexthop add id 102 group 12/13 fdb $bridge fdb add 02:02:00:00:00:13 dev vxlan1000 nhid 101 self [1] E-VPN https://tools.ietf.org/html/rfc7432 [2] E-VPN VxLAN: https://tools.ietf.org/html/rfc8365 [3] LPC talk with mention of nexthop groups for L2 ecmp http://vger.kernel.org/lpc_net2018_talks/scaling_bridge_fdb_database_slidesV3.pdf v4 - - fix error path free_skb in vxlan_xmit_nh - fix atomic notifier initialization issue (Reported-by:
kernel test robot <rong.a.chen@intel.com>)> The reported error was easy to locate and fix, but i was not able to re-test with the robot reproducer script due to some other issues with running the script on my test system. v3 - fix wording in selftest print as pointed out by davidA v2 - - dropped nikolays fixes for nexthop multipath null pointer deref (he will send those separately) - added negative tests for route add with fdb nexthop + a few more - Fixes for a few fdb replace conditions found during more testing - Moved to rcu_dereference_rtnl in vxlan_fdb_info and consolidate rcu dereferences - Fixes to build failures Reported-by:
kbuild test robot <lkp@intel.com> - DavidA, I am going to send a separate patch for the neighbor code validation for NDA_NH_ID if thats ok. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
This commit adds ipv4 and ipv6 fdb nexthop api tests to fib_nexthops.sh. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
vxlan driver registers for nexthop add/del notifiers to cleanup fdb entries pointing to such nexthops. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
This patch adds nexthop add/del notifiers. To be used by vxlan driver in a later patch. Could possibly be used by switchdev drivers in the future. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
Todays vxlan mac fdb entries can point to multiple remote ips (rdsts) with the sole purpose of replicating broadcast-multicast and unknown unicast packets to those remote ips. E-VPN multihoming [1,2,3] requires bridged vxlan traffic to be load balanced to remote switches (vteps) belonging to the same multi-homed ethernet segment (E-VPN multihoming is analogous to multi-homed LAG implementations, but with the inter-switch peerlink replaced with a vxlan tunnel). In other words it needs support for mac ecmp. Furthermore, for faster convergence, E-VPN multihoming needs the ability to update fdb ecmp nexthops independent of the fdb entries. New route nexthop API is perfect for this usecase. This patch extends the vxlan fdb code to take a nexthop id pointing to an ecmp nexthop group. Changes include: - New NDA_NH_ID attribute for fdbs - Use the newly added fdb nexthop groups - makes vxlan rdsts and nexthop handling code mutually exclusive - since this is a new use-case and the requirement is for ecmp nexthop groups, the fdb add and update path checks that the nexthop is really an ecmp nexthop group. This check can be relaxed in the future, if we want to introduce replication fdb nexthop groups and allow its use in lieu of current rdst lists. - fdb update requests with nexthop id's only allowed for existing fdb's that have nexthop id's - learning will not override an existing fdb entry with nexthop group - I have wrapped the switchdev offload code around the presence of rdst [1] E-VPN RFC https://tools.ietf.org/html/rfc7432 [2] E-VPN with vxlan https://tools.ietf.org/html/rfc8365 [3] http://vger.kernel.org/lpc_net2018_talks/scaling_bridge_fdb_database_slidesV3.pdf Includes a null check fix in vxlan_xmit from Nikolay v2 - Fixed build issue: Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Roopa Prabhu authored
This patch introduces ecmp nexthops and nexthop groups for mac fdb entries. In subsequent patches this is used by the vxlan driver fdb entries. The use case is E-VPN multihoming [1,2,3] which requires bridged vxlan traffic to be load balanced to remote switches (vteps) belonging to the same multi-homed ethernet segment (This is analogous to a multi-homed LAG but over vxlan). Changes include new nexthop flag NHA_FDB for nexthops referenced by fdb entries. These nexthops only have ip. This patch includes appropriate checks to avoid routes referencing such nexthops. example: $ip nexthop add id 12 via 172.16.1.2 fdb $ip nexthop add id 13 via 172.16.1.3 fdb $ip nexthop add id 102 group 12/13 fdb $bridge fdb add 02:02:00:00:00:13 dev vxlan1000 nhid 101 self [1] E-VPN https://tools.ietf.org/html/rfc7432 [2] E-VPN VxLAN: https://tools.ietf.org/html/rfc8365 [3] LPC talk with mention of nexthop groups for L2 ecmp http://vger.kernel.org/lpc_net2018_talks/scaling_bridge_fdb_database_slidesV3.pdf v4 - fixed uninitialized variable reported by kernel test robot Reported-by:
kernel test robot <rong.a.chen@intel.com> Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2020-05-21 This series contains updates to igc and e1000. Andre cleans up code that was left over from the igb driver that handled MAC address filters based on the source address, which is not currently supported. Simplifies the MAC address filtering code and prepare the igc driver for future source address support. Updated the MAC address filter internal APIs to support filters based on source address. Added support for Network Flow Classification (NFC) rules based on source MAC address. Cleaned up the 'cookie' field which is not used anywhere in the code and cleaned up a wrapper function that was not needed. Simplified the filtering code for readability and aligned the ethtool functions, so that function names were consistent. Alex provides a fix for e1000 to resolve a deadlock issue when NAPI is being disabled. Sasha does additional cleanup of the igc driver of dead code that is not used or needed. v2: Fix the function header comment in patch 3 of the series, based on the feedback from Jakub Kicinski. ==================== Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- May 22, 2020
-
-
Tony Nguyen authored
To make the function easier to identify as being part of the ice driver, prepend ice to the function name. Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
Self-explanatory. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
The variable status cannot be zero due to a prior check of it; remove this check. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Bruce Allan authored
The else conditional expression is always true due to the if conditional expression; remove it and add a comment to make it obvious still. Signed-off-by:
Bruce Allan <bruce.w.allan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Lihong Yang authored
In function ice_set_mac_address, we will remove old dev_addr before adding the new MAC. In the removing and adding process of the MAC, there is no need to return error if the check finds the to-be-removed dev_addr does not exist in the MAC filter list or the to-be-added mac already exists, keep going or return success accordingly. Signed-off-by:
Lihong Yang <lihong.yang@intel.com> Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Michal Swiatkowski authored
Move filter functions to separate file. Add functions that prepare suitable ice_fltr_info struct depending on the filter type and add this struct to earlier created list: - ice_fltr_add_mac_to_list - ice_fltr_add_vlan_to_list - ice_fltr_add_eth_to_list This functions are used in adding and removing filters. Create wrappers for functions mentioned above that alloc list, add suitable ice_fltr_info to it and call add or remove function. - ice_fltr_prepare_mac - ice_fltr_prepare_mac_and_broadcast - ice_fltr_prepare_vlan - ice_fltr_prepare_eth Signed-off-by:
Michal Swiatkowski <michal.swiatkowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Eric Joyner authored
Memory allocated in the ice_add_prof_id_vsig() function wasn't being properly freed if an error occurred inside the for-loop in the function. In particular, 'p' wasn't being freed if an error occurred before it was added to the resource list at the end of the for-loop. Signed-off-by:
Eric Joyner <eric.joyner@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jesse Brandeburg authored
The vf_id variable is dealt with in the code in inconsistent ways of sign usage, preventing compilation with -Werror=sign-compare. Fix this problem in the code by always treating vf_id as unsigned, since there are no valid values of vf_id that are negative. Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Karol Kolacinski authored
Change min() macros to min_t() which has compare type specified and it helps avoid precision loss. In some cases there was precision loss during calls or assignments. Some fields in structs were unnecessarily large and gave multiple warnings. There were also some minor type differences which are now fixed as well as some cases where a simple cast was needed. Callers were were passing data that is a u16 to ice_sched_cfg_node_bw_alloc() but the function was truncating that to a u8. Fix that by changing the function to take a u16. Signed-off-by:
Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Lihong Yang authored
When printing the ice status or AQ error codes, instead of printing out the numerical value, provide the description of the error code. This provides more info about the issue than a number. Signed-off-by:
Lihong Yang <lihong.yang@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Anirudh Venkataramanan authored
As soon as the driver registers the PF netdev, userspace utilities like NetworkManager try to bring up the associated interface. When this happens, the driver may not have finished initializing fully, resulting in a bunch of errors in the interface up flow. The driver already has a mechanism to indicate if it's not up yet; by setting the __ICE_DOWN bit in pf->state, but this bit gets cleared too early in the current flow. So clear this bit only when the driver is fully up. Also check for the same bit in the ice_open flow, and return -EBUSY if the bit is set. Also in ice_open, replace references of vsi->back with a local variable. Signed-off-by:
Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Dave Ertman authored
Currently, the ice driver is setting a PHY configuration, which causes a link drop, and then additionally it calls for a nway_reset, which restarts auto-negotiation on the link, which also causes a link drop. These two link events in such close timing is causing the FW to not be able to generate a link interrupt for the driver to respond to. Remove the unnecessary auto-negotiation restart from the set pauseparams flow. Also remove error path that would have performed an ice_down/ice_up as that is also unnecessary. Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Dave Ertman authored
The current implementation for contiguous TC check is assuming that the UPs will be mapped to TCs in a linear progressing fashion. This is obviously not always true. Change the check to allow for various UP2TC mapping configurations. Signed-off-by:
Dave Ertman <david.m.ertman@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Avinash JD authored
When there's a Tx timeout for a queue which belongs to a PFC enabled TC, then it's not because the queue is hung but because PFC is in action. In PFC, peer sends a pause frame for a specified period of time when its buffer threshold is exceeded (due to congestion). Netdev on the other hand checks if ACK is received within a specified time for a TX packet, if not, it'll invoke the tx_timeout routine. Signed-off-by:
Avinash JD <avinash.dayanand@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Brett Creeley authored
Implement promiscuous support for VF VSIs. Behaviour of promiscuous support is based on VF trust as well as the, introduced, vf-true-promisc flag. A trusted VF with vf-true-promisc disabled will be the default VSI, which means that all traffic without a matching destination MAC address in the device's internal switch will be forwarded to this VF VSI. A trusted VF with vf-true-promisc enabled will go into "true promiscuous mode". This amounts to the VF receiving all ingress and egress traffic that hits the device's internal switch. An untrusted VF will only receive traffic destined for that VF. The vf-true-promisc-support flag cannot be toggled while any VF is in promiscuous mode. This flag should be set prior to loading the iavf driver or spawning VF(s). Signed-off-by:
Brett Creeley <brett.creeley@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Tony Nguyen authored
Create a boost TCAM entry for each tunnel port in order to get a tunnel PTYPE. Update netdev feature flags and implement the appropriate logic to get and set values for hardware offloads. Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
Henry Tieman <henry.w.tieman@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
Jacob Keller authored
The flash memory for the ice hardware contains a block of information used for link management called the Netlist module. As this essentially represents another section of firmware, add its version information to the output of the driver's .info_get handler. This includes both a version and the first few bytes of a hash of the module contents. fw.netlist -> the version information extracted from the netlist module fw.netlist.build-> first 4 bytes of the hash of the contents, similar to fw.mgmt.build Signed-off-by:
Jacob Keller <jacob.e.keller@intel.com> Tested-by:
Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com>
-
David S. Miller authored
Oleksij Rempel says: ==================== provide KAPI for SQI This patches are extending ethtool netlink interface to export Signal Quality Index (SQI). SQI provided by 100Base-T1 PHYs and can be used for cable diagnostic. Compared to a typical cable tests, this value can be only used after link is established. changes v3: - rename __ethtool_get_sqi* to linkstate_get_sqi*. And move this functions to the net/ethtool/linkstate.c - protect linkstate_get_sqi* with locking changes v2: - use u32 instead of u8 for SQI - add SQI_MAX field and callbacks - some style fixes in the rst. - do not convert index to shifted index. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
This patch implements reading of the Signal Quality Index for better cable/link troubleshooting. Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Oleksij Rempel authored
Signal Quality Index is a mandatory value required by "OPEN Alliance SIG" for the 100Base-T1 PHYs [1]. This indicator can be used for cable integrity diagnostic and investigating other noise sources and implement by at least two vendors: NXP[2] and TI[3]. [1] http://www.opensig.org/download/document/218/Advanced_PHY_features_for_automotive_Ethernet_V1.0.pdf [2] https://www.nxp.com/docs/en/data-sheet/TJA1100.pdf [3] https://www.ti.com/product/DP83TC811R-Q1 Signed-off-by:
Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Michal Kubecek <mkubecek@suse.cz> Signed-off-by:
David S. Miller <davem@davemloft.net>
-