Fix a use-after-free error that is possible if the xsk_diag interface
is used after the socket has been unbound from the device. This can
happen either due to the socket being closed or the device
disappearing. In the early days of AF_XDP, the way we tested that a
socket was not bound to a device was to simply check if the netdevice
pointer in the xsk socket structure was NULL. Later, a better system
was introduced by having an explicit state variable in the xsk socket
struct. For example, the state of a socket that is on the way to being
closed and has been unbound from the device is XSK_UNBOUND.

The commit in the Fixes tag below deleted the old way of signalling
that a socket is unbound, setting dev to NULL. This in the belief that
all code using the old way had been exterminated. That was
unfortunately not true as the xsk diagnostics code was still using the
old way and thus does not work as intended when a socket is going
down. Fix this by introducing a test against the state variable. If
the socket is in the state XSK_UNBOUND, simply abort the diagnostic's
netlink operation.

Fixes: 18b1ab7a

 ("xsk: Fix race at socket teardown")
Reported-by:  <syzbot+822d1359297e2694f873@syzkaller.appspotmail.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by:  <syzbot+822d1359297e2694f873@syzkaller.appspotmail.com>
Tested-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20230831100119.17408-1-magnus.karlsson@gmail.com

There isn't really anything other than just "BPF" at this point,
so referring to it as "eBPF" in our standards document just causes
unnecessary confusion. Let's just be consistent and use "BPF".

Suggested-by: Will Hawkins <hawkinsw@obs.cr>
Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230828155948.123405-4-void@manifault.com

As specified in the IETF BPF charter, the BPF working group has plans to
add one or more informational documents that recommend conventions and
guidelines for producing portable BPF program binaries. The
instruction-set.rst document currently contains a "Registers and calling
convention" subsection which dictates a calling convention that belongs
in an ABI document, rather than an instruction set document. Let's move
it to a new abi.rst document so we can clean it up. The abi.rst document
will of course be significantly changed and expanded upon over time. For
now, it's really just a placeholder which will contain ABI-specific
language that doesn't belong in other documents.

Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230828155948.123405-3-void@manifault.com

In commit 4d496be9

 ("bpf,docs: Create new standardization
subdirectory"), I added a standardization/ directory to the BPF
documentation, which will contain the docs that will be standardized
as part of the effort with the IETF.

I included linux-notes.rst in that directory, but I shouldn't have. It
doesn't contain anything that will be standardized. Let's move it back
to Documentation/bpf.

Signed-off-by: David Vernet <void@manifault.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230828155948.123405-2-void@manifault.com

Sockmap and sockhash maps are a collection of psocks that are
objects representing a socket plus a set of metadata needed
to manage the BPF programs associated with the socket. These
maps use the stab->lock to protect from concurrent operations
on the maps, e.g. trying to insert to objects into the array
at the same time in the same slot. Additionally, a sockhash map
has a bucket lock to protect iteration and insert/delete into
the hash entry.

Each psock has a psock->link which is a linked list of all the
maps that a psock is attached to. This allows a psock (socket)
to be included in multiple sockmap and sockhash maps. This
linked list is protected the psock->link_lock.

They _must_ be nested correctly to avoid deadlock:

  lock(stab->lock)
    : do BPF map operations and psock insert/delete
    lock(psock->link_lock)
       : add map to psock linked list of maps
    unlock(psock->link_lock)
  unlock(stab->lock)

For non PREEMPT_RT kernels both raw_spin_lock_t and spin_lock_t
are guaranteed to not sleep. But, with PREEMPT_RT kernels the
spin_lock_t variants may sleep. In the current code we have
many patterns like this:

   rcu_critical_section:
      raw_spin_lock(stab->lock)
         spin_lock(psock->link_lock) <- may sleep ouch
         spin_unlock(psock->link_lock)
      raw_spin_unlock(stab->lock)
   rcu_critical_section

Nesting spin_lock() inside a raw_spin_lock() violates locking
rules for PREEMPT_RT kernels. And additionally we do alloc(GFP_ATOMICS)
inside the stab->lock, but those might sleep on PREEMPT_RT kernels.
The result is splats like this:

./test_progs -t sockmap_basic
[   33.344330] bpf_testmod: loading out-of-tree module taints kernel.
[   33.441933]
[   33.442089] =============================
[   33.442421] [ BUG: Invalid wait context ]
[   33.442763] 6.5.0-rc5-01731-gec0ded2e0282 #4958 Tainted: G           O
[   33.443320] -----------------------------
[   33.443624] test_progs/2073 is trying to lock:
[   33.443960] ffff888102a1c290 (&psock->link_lock){....}-{3:3}, at: sock_map_update_common+0x2c2/0x3d0
[   33.444636] other info that might help us debug this:
[   33.444991] context-{5:5}
[   33.445183] 3 locks held by test_progs/2073:
[   33.445498]  #0: ffff88811a208d30 (sk_lock-AF_INET){+.+.}-{0:0}, at: sock_map_update_elem_sys+0xff/0x330
[   33.446159]  #1: ffffffff842539e0 (rcu_read_lock){....}-{1:3}, at: sock_map_update_elem_sys+0xf5/0x330
[   33.446809]  #2: ffff88810d687240 (&stab->lock){+...}-{2:2}, at: sock_map_update_common+0x177/0x3d0
[   33.447445] stack backtrace:
[   33.447655] CPU: 10 PID

To fix observe we can't readily remove the allocations (for that
we would need to use/create something similar to bpf_map_alloc). So
convert raw_spin_lock_t to spin_lock_t. We note that sock_map_update
that would trigger the allocate and potential sleep is only allowed
through sys_bpf ops and via sock_ops which precludes hw interrupts
and low level atomic sections in RT preempt kernel. On non RT
preempt kernel there are no changes here and spin locks sections
and alloc(GFP_ATOMIC) are still not sleepable.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230830053517.166611-1-john.fastabend@gmail.com

Add a section on CO-RE relocations to llvm_relo.rst. Describe relevant .BTF.ext
structure, `enum bpf_core_relo_kind` and `struct bpf_core_relo` in some detail.

Description is based on doc-strings from:

  - include/uapi/linux/bpf.h:struct bpf_core_relo
  - tools/lib/bpf/relo_core.c:__bpf_core_types_match()

Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yonghong.song@linux.dev>
Link: https://lore.kernel.org/bpf/20230826222912.2560865-2-eddyz87@gmail.com

The offset to use when calculating the target of a program-local call is
in the instruction's imm field, not its offset field.

Signed-off-by: Will Hawkins <hawkinsw@obs.cr>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Eduard Zingerman <eddyz87@gmail.com>
Acked-by: David Vernet <void@manifault.com>
Link: https://lore.kernel.org/bpf/20230826053258.1860167-1-hawkinsw@obs.cr

Occasionally, with './test_progs -j' on my vm, I will hit the
following failure:

  test_cgrp_local_storage:PASS:join_cgroup /cgrp_local_storage 0 nsec
  test_cgroup_iter_sleepable:PASS:skel_open 0 nsec
  test_cgroup_iter_sleepable:PASS:skel_load 0 nsec
  test_cgroup_iter_sleepable:PASS:attach_iter 0 nsec
  test_cgroup_iter_sleepable:PASS:iter_create 0 nsec
  test_cgroup_iter_sleepable:FAIL:cgroup_id unexpected cgroup_id: actual 1 != expected 2812
  #48/5    cgrp_local_storage/cgroup_iter_sleepable:FAIL
  #48      cgrp_local_storage:FAIL

Finally, I decided to do some investigation since the test is introduced
by myself. It turns out the reason is due to cgroup_fd with value 0.
In cgroup_iter, a cgroup_fd of value 0 means the root cgroup.

	/* from cgroup_iter.c */
        if (fd)
                cgrp = cgroup_v1v2_get_from_fd(fd);
        else if (id)
                cgrp = cgroup_get_from_id(id);
        else /* walk the entire hierarchy by default. */
                cgrp = cgroup_get_from_path("/");

That is why we got cgroup_id 1 instead of expected 2812.

Why we got a cgroup_fd 0? Nobody should really touch 'stdin' (fd 0) in
test_progs. I traced 'close' syscall with stack trace and found the root
cause, which is a bug in bpf_obj_pinning.c. Basically, the code closed
fd 0 although it should not. Fixing the bug in bpf_obj_pinning.c also
resolved the above cgroup_iter_sleepable subtest failure.

Fixes: 3b22f98e

 ("selftests/bpf: Add path_fd-based BPF_OBJ_PIN and BPF_OBJ_GET tests")
Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230827150551.1743497-1-yonghong.song@linux.dev

Currently, xsk_build_skb() is a function that builds skb in two possible
ways and then is ended with common error handling.

We can distinguish four possible error paths and handling in xsk_build_skb():

 1. sock_alloc_send_skb fails: Retry (skb is NULL).
 2. skb_store_bits fails : Free skb and retry.
 3. MAX_SKB_FRAGS exceeded: Free skb, cleanup and drop packet.
 4. alloc_page fails for frag: Retry page allocation w/o freeing skb

1] and 3] can happen in xsk_build_skb_zerocopy(), which is one of the
two code paths responsible for building skb. Common error path in
xsk_build_skb() assumes that in case errno != -EAGAIN, skb is a valid
pointer, which is wrong as kernel test robot reports that in
xsk_build_skb_zerocopy() other errno values are returned for skb being
NULL.

To fix this, set -EOVERFLOW as error when MAX_SKB_FRAGS are exceeded
and packet needs to be dropped in both xsk_build_skb() and
xsk_build_skb_zerocopy() and use this to distinguish against all other
error cases. Also, add explicit kfree_skb() for 3] so that handling
of 1], 2], and 3] becomes identical where allocation needs to be retried.

Fixes: cf24f5a5

 ("xsk: add support for AF_XDP multi-buffer on Tx path")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Tirthendu Sarkar <tirthendu.sarkar@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Closes: https://lore.kernel.org/r/202307210434.OjgqFcbB-lkp@intel.com
Link: https://lore.kernel.org/bpf/20230823144713.2231808-1-tirthendu.sarkar@intel.com

Quentin reported build warnings when building bpftool :

    link.c: In function ‘perf_config_hw_cache_str’:
    link.c:86:18: warning: comparison of unsigned expression in ‘>= 0’ is always true [-Wtype-limits]
       86 |         if ((id) >= 0 && (id) < ARRAY_SIZE(array))      \
          |                  ^~
    link.c:320:20: note: in expansion of macro ‘perf_event_name’
      320 |         hw_cache = perf_event_name(evsel__hw_cache, config & 0xff);
          |                    ^~~~~~~~~~~~~~~
    [... more of the same for the other calls to perf_event_name ...]

He also pointed out the reason and the solution:

  We're always passing unsigned, so it should be safe to drop the check on
  (id) >= 0.

Fixes: 62b57e3d

 ("bpftool: Add perf event names")
Reported-by: Quentin Monnet <quentin@isovalent.com>
Suggested-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <quentin@isovalent.com>
Closes: https://lore.kernel.org/bpf/a35d9a2d-54a0-49ec-9ed1-8fcf1369d3cc@isovalent.com
Link: https://lore.kernel.org/bpf/20230830030325.3786-1-laoar.shao@gmail.com

With latest clang18, I hit test_progs failures for the following test:

  #13/2    bpf_cookie/multi_kprobe_link_api:FAIL
  #13/3    bpf_cookie/multi_kprobe_attach_api:FAIL
  #13      bpf_cookie:FAIL
  #75      fentry_fexit:FAIL
  #76/1    fentry_test/fentry:FAIL
  #76      fentry_test:FAIL
  #80/1    fexit_test/fexit:FAIL
  #80      fexit_test:FAIL
  #110/1   kprobe_multi_test/skel_api:FAIL
  #110/2   kprobe_multi_test/link_api_addrs:FAIL
  #110/3   kprobe_multi_test/link_api_syms:FAIL
  #110/4   kprobe_multi_test/attach_api_pattern:FAIL
  #110/5   kprobe_multi_test/attach_api_addrs:FAIL
  #110/6   kprobe_multi_test/attach_api_syms:FAIL
  #110     kprobe_multi_test:FAIL

For example, for #13/2, the error messages are:

  [...]
  kprobe_multi_test_run:FAIL:kprobe_test7_result unexpected kprobe_test7_result: actual 0 != expected 1
  [...]
  kprobe_multi_test_run:FAIL:kretprobe_test7_result unexpected kretprobe_test7_result: actual 0 != expected 1

clang17 does not have this issue.

Further investigation shows that kernel func bpf_fentry_test7(), used in
the above tests, is inlined by the compiler although it is marked as
noinline.

  int noinline bpf_fentry_test7(struct bpf_fentry_test_t *arg)
  {
        return (long)arg;
  }

It is known that for simple functions like the above (e.g. just returning
a constant or an input argument), the clang compiler may still do inlining
for a noinline function. Adding 'asm volatile ("")' in the beginning of the
bpf_fentry_test7() can prevent inlining.

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Link: https://lore.kernel.org/bpf/20230826200843.2210074-1-yonghong.song@linux.dev

Pull networking updates from Paolo Abeni:
 "Core:

   - Increase size limits for to-be-sent skb frag allocations. This
     allows tun, tap devices and packet sockets to better cope with
     large writes operations

   - Store netdevs in an xarray, to simplify iterating over netdevs

   - Refactor nexthop selection for multipath routes

   - Improve sched class lifetime handling

   - Add backup nexthop ID support for bridge

   - Implement drop reasons support in openvswitch

   - Several data races annotations and fixes

   - Constify the sk parameter of routing functions

   - Prepend kernel version to netconsole message

  Protocols:

   - Implement support for TCP probing the peer being under memory
     pressure

   - Remove hard coded limitation on IPv6 specific info placement inside
     the socket struct

   - Get rid of sysctl_tcp_adv_win_scale and use an auto-estimated per
     socket scaling factor

   - Scaling-up the IPv6 expired route GC via a separated list of
     expiring routes

   - In-kernel support for the TLS alert protocol

   - Better support for UDP reuseport with connected sockets

   - Add NEXT-C-SID support for SRv6 End.X behavior, reducing the SR
     header size

   - Get rid of additional ancillary per MPTCP connection struct socket

   - Implement support for BPF-based MPTCP packet schedulers

   - Format MPTCP subtests selftests results in TAP

   - Several new SMC 2.1 features including unique experimental options,
     max connections per lgr negotiation, max links per lgr negotiation

  BPF:

   - Multi-buffer support in AF_XDP

   - Add multi uprobe BPF links for attaching multiple uprobes and usdt
     probes, which is significantly faster and saves extra fds

   - Implement an fd-based tc BPF attach API (TCX) and BPF link support
     on top of it

   - Add SO_REUSEPORT support for TC bpf_sk_assign

   - Support new instructions from cpu v4 to simplify the generated code
     and feature completeness, for x86, arm64, riscv64

   - Support defragmenting IPv(4|6) packets in BPF

   - Teach verifier actual bounds of bpf_get_smp_processor_id() and fix
     perf+libbpf issue related to custom section handling

   - Introduce bpf map element count and enable it for all program types

   - Add a BPF hook in sys_socket() to change the protocol ID from
     IPPROTO_TCP to IPPROTO_MPTCP to cover migration for legacy

   - Introduce bpf_me_mcache_free_rcu() and fix OOM under stress

   - Add uprobe support for the bpf_get_func_ip helper

   - Check skb ownership against full socket

   - Support for up to 12 arguments in BPF trampoline

   - Extend link_info for kprobe_multi and perf_event links

  Netfilter:

   - Speed-up process exit by aborting ruleset validation if a fatal
     signal is pending

   - Allow NLA_POLICY_MASK to be used with BE16/BE32 types

  Driver API:

   - Page pool optimizations, to improve data locality and cache usage

   - Introduce ndo_hwtstamp_get() and ndo_hwtstamp_set() to avoid the
     need for raw ioctl() handling in drivers

   - Simplify genetlink dump operations (doit/dumpit) providing them the
     common information already populated in struct genl_info

   - Extend and use the yaml devlink specs to [re]generate the split ops

   - Introduce devlink selective dumps, to allow SF filtering SF based
     on handle and other attributes

   - Add yaml netlink spec for netlink-raw families, allow route, link
     and address related queries via the ynl tool

   - Remove phylink legacy mode support

   - Support offload LED blinking to phy

   - Add devlink port function attributes for IPsec

  New hardware / drivers:

   - Ethernet:
      - Broadcom ASP 2.0 (72165) ethernet controller
      - MediaTek MT7988 SoC
      - Texas Instruments AM654 SoC
      - Texas Instruments IEP driver
      - Atheros qca8081 phy
      - Marvell 88Q2110 phy
      - NXP TJA1120 phy

   - WiFi:
      - MediaTek mt7981 support

   - Can:
      - Kvaser SmartFusion2 PCI Express devices
      - Allwinner T113 controllers
      - Texas Instruments tcan4552/4553 chips

   - Bluetooth:
      - Intel Gale Peak
      - Qualcomm WCN3988 and WCN7850
      - NXP AW693 and IW624
      - Mediatek MT2925

  Drivers:

   - Ethernet NICs:
      - nVidia/Mellanox:
         - mlx5:
            - support UDP encapsulation in packet offload mode
            - IPsec packet offload support in eswitch mode
            - improve aRFS observability by adding new set of counters
            - extends MACsec offload support to cover RoCE traffic
            - dynamic completion EQs
         - mlx4:
            - convert to use auxiliary bus instead of custom interface
              logic
      - Intel
         - ice:
            - implement switchdev bridge offload, even for LAG
              interfaces
            - implement SRIOV support for LAG interfaces
         - igc:
            - add support for multiple in-flight TX timestamps
      - Broadcom:
         - bnxt:
            - use the unified RX page pool buffers for XDP and non-XDP
            - use the NAPI skb allocation cache
      - OcteonTX2:
         - support Round Robin scheduling HTB offload
         - TC flower offload support for SPI field
      - Freescale:
         - add XDP_TX feature support
      - AMD:
         - ionic: add support for PCI FLR event
         - sfc:
            - basic conntrack offload
            - introduce eth, ipv4 and ipv6 pedit offloads
      - ST Microelectronics:
         - stmmac: maximze PTP timestamping resolution

   - Virtual NICs:
      - Microsoft vNIC:
         - batch ringing RX queue doorbell on receiving packets
         - add page pool for RX buffers
      - Virtio vNIC:
         - add per queue interrupt coalescing support
      - Google vNIC:
         - add queue-page-list mode support

   - Ethernet high-speed switches:
      - nVidia/Mellanox (mlxsw):
         - add port range matching tc-flower offload
         - permit enslavement to netdevices with uppers

   - Ethernet embedded switches:
      - Marvell (mv88e6xxx):
         - convert to phylink_pcs
      - Renesas:
         - r8A779fx: add speed change support
         - rzn1: enables vlan support

   - Ethernet PHYs:
      - convert mv88e6xxx to phylink_pcs

   - WiFi:
      - Qualcomm Wi-Fi 7 (ath12k):
         - extremely High Throughput (EHT) PHY support
      - RealTek (rtl8xxxu):
         - enable AP mode for: RTL8192FU, RTL8710BU (RTL8188GU),
           RTL8192EU and RTL8723BU
      - RealTek (rtw89):
         - Introduce Time Averaged SAR (TAS) support

   - Connector:
      - support for event filtering"

* tag 'net-next-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1806 commits)
  net: ethernet: mtk_wed: minor change in wed_{tx,rx}info_show
  net: ethernet: mtk_wed: add some more info in wed_txinfo_show handler
  net: stmmac: clarify difference between "interface" and "phy_interface"
  r8152: add vendor/device ID pair for D-Link DUB-E250
  devlink: move devlink_notify_register/unregister() to dev.c
  devlink: move small_ops definition into netlink.c
  devlink: move tracepoint definitions into core.c
  devlink: push linecard related code into separate file
  devlink: push rate related code into separate file
  devlink: push trap related code into separate file
  devlink: use tracepoint_enabled() helper
  devlink: push region related code into separate file
  devlink: push param related code into separate file
  devlink: push resource related code into separate file
  devlink: push dpipe related code into separate file
  devlink: move and rename devlink_dpipe_send_and_alloc_skb() helper
  devlink: push shared buffer related code into separate file
  devlink: push port related code into separate file
  devlink: push object register/unregister notifications into separate helpers
  inet: fix IP_TRANSPARENT error handling
  ...

Pull crypto updates from Herbert Xu:
 "API:
   - Move crypto engine callback from tfm ctx into algorithm object
   - Fix atomic sleep bug in crypto_destroy_instance
   - Move lib/mpi into lib/crypto

  Algorithms:
   - Add chacha20 and poly1305 implementation for powerpc p10

  Drivers:
   - Add AES skcipher and aead support to starfive
   - Add Dynamic Boost Control support to ccp
   - Add support for STM32P13 platform to stm32"

* tag 'v6.6-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (149 commits)
  Revert "dt-bindings: crypto: qcom,prng: Add SM8450"
  crypto: chelsio - Remove unused declarations
  X.509: if signature is unsupported skip validation
  crypto: qat - fix crypto capability detection for 4xxx
  crypto: drivers - Explicitly include correct DT includes
  crypto: engine - Remove crypto_engine_ctx
  crypto: zynqmp - Use new crypto_engine_op interface
  crypto: virtio - Use new crypto_engine_op interface
  crypto: stm32 - Use new crypto_engine_op interface
  crypto: jh7110 - Use new crypto_engine_op interface
  crypto: rk3288 - Use new crypto_engine_op interface
  crypto: omap - Use new crypto_engine_op interface
  crypto: keembay - Use new crypto_engine_op interface
  crypto: sl3516 - Use new crypto_engine_op interface
  crypto: caam - Use new crypto_engine_op interface
  crypto: aspeed - Remove non-standard sha512 algorithms
  crypto: aspeed - Use new crypto_engine_op interface
  crypto: amlogic - Use new crypto_engine_op interface
  crypto: sun8i-ss - Use new crypto_engine_op interface
  crypto: sun8i-ce - Use new crypto_engine_op interface
  ...

Pull gpio updates from Bartosz Golaszewski:
 "We have a lot of code refactoring using common helpers and ended up
  removing more lines then we're adding this release cycle.

  Nothing really stands out, just small updates all over the place.

  Core GPIOLIB updates:
   - wake-up poll() in user-space on device unbind
   - improve fwnode usage
   - interrupt domain handling improvements
   - correctly handle the ngpios property in gpio-mmio

  Driver cleanups:
   - remove unneeded calls to platform_set_drvdata() all around the
     place
   - remove unneeded of_match_ptr() expansions whenever a driver depends
     on CONFIG_OF
   - remove redundant calls to dev_err_probe() from gpio-omap and
     gpio-davinci

  Driver improvements:
   - use autopointers and guards from cleanup.h in gpio-sim
   - shrink code in gpio-sim using some common helpers
   - convert the idio family of drivers to using gpio-regmap
   - convert gpio-ws16c48 to using gpio-regmap
   - use devres to simplify code in gpio-pisosr and gpio-mxc
   - update gpio-sifive: support IRQ wake, improve interrupt handling,
     allow building as module
   - make gpio-ge and gpio-bcm-kona OF-independent (plus some minor
     tweaks)
   - add support for new models in gpio-pca953x and gpio-ds4520
   - add runtime PM support to gpio-mxc
   - fix a build warning in gpio-mxs
   - add support for adding pin ranges to gpio-mlxbf3
   - add counter/timer support to gpio-104-dio-48e
   - switch to dynamic GPIO base allocation in gpio-vf610
   - minor oneliners here and there

  Device-tree bindings updates:
   - enable the gpio-line-names property in snps,dw-apb and STMPE GPIO
   - document new models in fsl-imx-gpio, ds4520 and pca95xx
   - convert the bindings for brcm,kona-gpio to YAML"

* tag 'gpio-updates-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (94 commits)
  gpio: pca953x: add support for TCA9538
  dt-bindings: gpio: pca95xx: document new tca9538 chip
  gpio: pca953x: Use i2c_get_match_data()
  gpio: mlxbf3: use capital "OR" for multiple licenses in SPDX
  gpio: pcf857x: Extend match data support for OF tables
  gpio: vf610: switch to dynamic allocat GPIO base
  gpiolib: provide and use gpiod_line_state_notify()
  gpio: cdev: wake up lineevent poll() on device unbind
  gpio: cdev: wake up linereq poll() on device unbind
  gpio: cdev: wake up chardev poll() on device unbind
  gpiolib: add a second blocking notifier to struct gpio_device
  gpio: cdev: open-code to_gpio_chardev_data()
  gpiolib: rename the gpio_device notifier
  gpio: mlxbf3: Support add_pin_ranges()
  gpio: mxc: Use helper function devm_clk_get_optional_enabled()
  gpio: pca9570: fix kerneldoc
  gpio: sim: simplify code with cleanup helpers
  gpio: sim: replace memmove() + strstrip() with skip_spaces() + strim()
  gpio: sim: simplify gpio_sim_device_config_live_store()
  gpio: mxc: release the parent IRQ in runtime suspend
  ...

Pull hwmon updates from Guenter Roeck:
 "New drivers:

   - Renesas HS3001

  Chip support added to existing drivers:

   - pmbus/mp2975 driver now supports MP2971 and MP2973

  Functional improvements:

   - Additional voltage and temperature sensor support for
     NCT6798/NCT6799 in nt6755 driver

   - it87 driver now detects AMDTSI sensor type

   - dimmtemp now supports more than 32 DIMMs

  Driver removals:

   - sm665 driver removed as unsupportable and long since obsolete

  .. and minor fixes, cleanups, and simplifications in several drivers"

* tag 'hwmon-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (57 commits)
  hwmon: (tmp513) Simplify probe()
  hwmon: (tmp513) Fix the channel number in tmp51x_is_visible()
  hwmon: (mlxreg-fan) Extend number of supported fans
  hwmon: (sis5595) Do PCI error checks on own line
  hwmon: (vt8231) Do PCI error checks on own line
  hwmon: (via686a) Do PCI error checks on own line
  hwmon: pmbus: Fix -EIO seen on pli1209
  hwmon: pmbus: Drop unnecessary clear fault page
  hwmon: pmbus: Reduce clear fault page invocations
  hwmon: (nsa320-hwmon) Remove redundant of_match_ptr()
  hwmon: (pmbus/ucd9200) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (pmbus/ucd9000) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (pmbus/tps53679) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (pmbus/ibm-cffps) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (tmp513) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (max6697) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (max20730) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (lm90) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (lm85) fix Wvoid-pointer-to-enum-cast warning
  hwmon: (lm75) fix Wvoid-pointer-to-enum-cast warning
  ...

Pull MMC updates from Ulf Hansson:
 "MMC core:
   - Convert drivers to use the ->remove_new() callback
   - Propagate the removable attribute for the card's device

  MMC host:
   - Convert drivers to use the ->remove_new() callback
   - atmel-mci: Convert to gpio descriptors and cleanup the code
   - davinci: Make SDIO irq truly optional
   - renesas_sdhi: Register irqs before registering controller
   - sdhci: Simplify the sdhci_pltfm_* interface a bit
   - sdhci-esdhc-imx: Improve support for the 1.8V errata
   - sdhci-of-at91: Add support for the microchip sam9x7 variant
   - sdhci-of-dwcmshc: Add support for runtime PM
   - sdhci-pci-o2micro: Add support for the new Bayhub GG8 variant
   - sdhci-sprd: Add support for SD high-speed mode tuning
   - uniphier-sd: Register irqs before registering controller"

* tag 'mmc-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits)
  mmc: atmel-mci: Move card detect gpio polarity quirk to gpiolib
  mmc: atmel-mci: move atmel MCI header file
  mmc: atmel-mci: Convert to gpio descriptors
  mmc: sdhci-sprd: Add SD HS mode online tuning
  mmc: core: Add host specific tuning support for SD HS mode
  mmc: sdhci-of-dwcmshc: Add runtime PM operations
  mmc: sdhci-of-dwcmshc: Add error handling in dwcmshc_resume
  mmc: sdhci-esdhc-imx: improve ESDHC_FLAG_ERR010450
  mmc: sdhci-pltfm: Rename sdhci_pltfm_register()
  mmc: sdhci-pltfm: Remove sdhci_pltfm_unregister()
  mmc: sdhci-st: Use sdhci_pltfm_remove()
  mmc: sdhci-pxav2: Use sdhci_pltfm_remove()
  mmc: sdhci-of-sparx5: Use sdhci_pltfm_remove()
  mmc: sdhci-of-hlwd: Use sdhci_pltfm_remove()
  mmc: sdhci-of-esdhc: Use sdhci_pltfm_remove()
  mmc: sdhci-of-at91: Use sdhci_pltfm_remove()
  mmc: sdhci-of-arasan: Use sdhci_pltfm_remove()
  mmc: sdhci-iproc: Use sdhci_pltfm_remove()
  mmc: sdhci_f_sdh30: Use sdhci_pltfm_remove()
  mmc: sdhci-dove: Use sdhci_pltfm_remove()
  ...

Pull spi updates from Mark Brown:
 "There's been quite a lot of generic activity here, but more
  administrative than featuers. We also have a bunch of new drivers,
  including one that's part of a MFD so we pulled in the core parts of
  that:

   - Lots of work from both Yang Yingliang and Andy Shevchenko on moving
     to host/device/controller based terminology for devices.

   - QuadSPI SPI support for Allwinner sun6i.

   - New device support Cirrus Logic CS43L43, Longsoon, Qualcomm GENI
     QuPv3 and StarFive JH7110 QSPI"

* tag 'spi-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (151 commits)
  spi: at91-usart: Use PTR_ERR_OR_ZERO() to simplify code
  spi: spi-sn-f-ospi: switch to use modern name
  spi: sifive: switch to use modern name
  spi: sh: switch to use modern name
  spi: sh-sci: switch to use modern name
  spi: sh-msiof: switch to use modern name
  spi: sh-hspi: switch to use modern name
  spi: sc18is602: switch to use modern name
  spi: s3c64xx: switch to use modern name
  spi: rzv2m-csi: switch to use devm_spi_alloc_host()
  spi: rspi: switch to use spi_alloc_host()
  spi: rockchip: switch to use modern name
  spi: rockchip-sfc: switch to use modern name
  spi: realtek-rtl: switch to use devm_spi_alloc_host()
  spi: rb4xx: switch to use modern name
  spi: qup: switch to use modern name
  spi: spi-qcom-qspi: switch to use modern name
  spi: pxa2xx: switch to use modern name
  spi: ppc4xx: switch to use modern name
  spi: spl022: switch to use modern name
  ...

Pull regulator updates from Mark Brown:
 "Other than new device support and some minor fixes this has been a
  really quiet release, the only notable things are the new drivers.

  There's a couple of MFDs among the new devices so the generic parts
  are pulled in:

   - Support for Analog Devices MAX77831/57/59, Awinc AW37503, Qualcom
     PMX75 and RFGEN, RealTek RT5733, RichTek RTQ2208 and Texas
     Instruments TPS65086"

* tag 'regulator-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (68 commits)
  regulator: userspace-consumer: Drop event support for this cycle
  regulator: aw37503: Switch back to use struct i2c_driver's .probe()
  dt-bindings: regulator: qcom,rpmh-regulator: allow i, j, l, m & n as RPMh resource name suffix
  regulator: dt-bindings: Add Awinic AW37503
  regulator: aw37503: add regulator driver for Awinic AW37503
  regulator: tps65086: Select dedicated regulator config for chip variant
  mfd: tps65086: Read DEVICE ID register 1 from device
  regulator: raa215300: Update help description
  regulator: raa215300: Add missing blank space
  regulator: raa215300: Change rate from 32000->32768
  regulator: db8500-prcmu: Remove unused declaration power_state_active_is_enabled()
  regulator: raa215300: Add const definition
  regulator: raa215300: Fix resource leak in case of error
  regulator: rtq2208: Switch back to use struct i2c_driver's .probe()
  regulator: lp872x: Fix Wvoid-pointer-to-enum-cast warning
  regulator: max77857: Fix Wvoid-pointer-to-enum-cast warning
  regulator: ltc3589: Fix Wvoid-pointer-to-enum-cast warning
  regulator: qcom_rpm-regulator: Use devm_kmemdup to replace devm_kmalloc + memcpy
  regulator: tps6286x-regulator: Remove redundant of_match_ptr() macros
  regulator: pfuze100-regulator: Remove redundant of_match_ptr() macro
  ...

Pull regmap updates from Mark Brown:
 "This is a much quieter release than the past few, there's one small
  API addition that I noticed a user for in ALSA and a bunch of
  cleanups:

   - Provide an interface for determining if a register is present in
     the cache and add a user of it in ALSA.

   - Full support for dynamic allocations, following the temporary
     bodges that were done as fixes in the previous release.

   - Remove the unused and questionably working 64 bit support"

* tag 'regmap-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: Fix the type used for a bitmap pointer
  regmap: Remove dynamic allocation warnings for rbtree and maple
  regmap: rbtree: Use alloc_flags for memory allocations
  regmap: maple: Use alloc_flags for memory allocations
  regmap: Reject fast_io regmap configurations with RBTREE and MAPLE caches
  ALSA: hda: Use regcache_reg_cached() rather than open coding
  regmap: Provide test for regcache_reg_present()
  regmap: Let users check if a register is cached
  regmap: Provide user selectable option to enable regmap
  regmap: mmio: Remove unused 64-bit support code
  regmap: cache: Revert "Add 64-bit mode support"
  regmap: Revert "add 64-bit mode support" and Co.

Pull HSI update from Sebastian Reichel:

 - explicitly include correct DT includes

* tag 'hsi-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  hsi: omap_ssi: Explicitly include correct DT includes

Pull power supply and reset updates from Sebastian Reichel:

 - core: avoid duplicate hwmon device from thermal framework

 - convert multiple drivers to devm_platform_ioremap_resource

 - at91-reset: add sysfs interface to the power on reason

 - misc small fixes and improvements

* tag 'for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  power: supply: qcom_pmi8998_charger: fix charger status
  power: supply: qcom_pmi8998_charger: remove CHARGE_CONTROL_LIMIT_* props
  power: supply: qcom_pmi8998_charger: fix uninitialized variable
  power: reset: oxnas-restart: remove obsolete restart driver
  power: supply: core: Avoid duplicate hwmon device from thermal framework
  power: reset: ocelot: Convert to devm_platform_ioremap_resource()
  power: reset: msm: Convert to devm_platform_ioremap_resource()
  power: reset: gemini-poweroff: Convert to devm_platform_ioremap_resource()
  power: reset: brcm-kona: Convert to devm_platform_ioremap_resource()
  power: reset: at91-sama5d2_shdwc: Convert to devm_platform_ioremap_resource()
  power: reset: at91-poweroff: Convert to devm_platform_ioremap_resource()
  power: reset: at91-reset: add sysfs interface to the power on reason
  power: supply: bd99954: make read-only array sub_status_reg
  power: supply: bq24190: Considers FORCE_20PCT when getting IPRECHG
  power: Explicitly include correct DT includes

Pull auxdisplay update from Miguel Ojeda:

 - hd44780: move cursor home after clear display command

   The change allows to support displays like the NewHaven
   NHD-0220DZW-AG5 which has a non-standard controller.

* tag 'auxdisplay-6.6' of https://github.com/ojeda/linux:
  auxdisplay: hd44780: move cursor home after clear display command

Pull rust updates from Miguel Ojeda:
 "In terms of lines, most changes this time are on the pinned-init API
  and infrastructure. While we have a Rust version upgrade, and thus a
  bunch of changes from the vendored 'alloc' crate as usual, this time
  those do not account for many lines.

  Toolchain and infrastructure:

   - Upgrade to Rust 1.71.1. This is the second such upgrade, which is a
     smaller jump compared to the last time.

     This version allows us to remove the '__rust_*' allocator functions
     -- the compiler now generates them as expected, thus now our
     'KernelAllocator' is used.

     It also introduces the 'offset_of!' macro in the standard library
     (as an unstable feature) which we will need soon. So far, we were
     using a declarative macro as a prerequisite in some not-yet-landed
     patch series, which did not support sub-fields (i.e. nested
     structs):

         #[repr(C)]
         struct S {
             a: u16,
             b: (u8, u8),
         }

         assert_eq!(offset_of!(S, b.1), 3);

   - Upgrade to bindgen 0.65.1. This is the first time we upgrade its
     version.

     Given it is a fairly big jump, it comes with a fair number of
     improvements/changes that affect us, such as a fix needed to
     support LLVM 16 as well as proper support for '__noreturn' C
     functions, which are now mapped to return the '!' type in Rust:

         void __noreturn f(void); // C
         pub fn f() -> !;         // Rust

   - 'scripts/rust_is_available.sh' improvements and fixes.

     This series takes care of all the issues known so far and adds a
     few new checks to cover for even more cases, plus adds some more
     help texts. All this together will hopefully make problematic
     setups easier to identify and to be solved by users building the
     kernel.

     In addition, it adds a test suite which covers all branches of the
     shell script, as well as tests for the issues found so far.

   - Support rust-analyzer for out-of-tree modules too.

   - Give 'cfg's to rust-analyzer for the 'core' and 'alloc' crates.

   - Drop 'scripts/is_rust_module.sh' since it is not needed anymore.

  Macros crate:

   - New 'paste!' proc macro.

     This macro is a more flexible version of 'concat_idents!': it
     allows the resulting identifier to be used to declare new items and
     it allows to transform the identifiers before concatenating them,
     e.g.

         let x_1 = 42;
         paste!(let [<x _2>] = [<x _1>];);
         assert!(x_1 == x_2);

     The macro is then used for several of the pinned-init API changes
     in this pull.

  Pinned-init API:

   - Make '#[pin_data]' compatible with conditional compilation of
     fields, allowing to write code like:

         #[pin_data]
         pub struct Foo {
             #[cfg(CONFIG_BAR)]
             a: Bar,
             #[cfg(not(CONFIG_BAR))]
             a: Baz,
         }

   - New '#[derive(Zeroable)]' proc macro for the 'Zeroable' trait,
     which allows 'unsafe' implementations for structs where every field
     implements the 'Zeroable' trait, e.g.:

         #[derive(Zeroable)]
         pub struct DriverData {
             id: i64,
             buf_ptr: *mut u8,
             len: usize,
         }

   - Add '..Zeroable::zeroed()' syntax to the 'pin_init!' macro for
     zeroing all other fields, e.g.:

         pin_init!(Buf {
             buf: [1; 64],
             ..Zeroable::zeroed()
         });

   - New '{,pin_}init_array_from_fn()' functions to create array
     initializers given a generator function, e.g.:

         let b: Box<[usize; 1_000]> = Box::init::<Error>(
             init_array_from_fn(|i| i)
         ).unwrap();

         assert_eq!(b.len(), 1_000);
         assert_eq!(b[123], 123);

   - New '{,pin_}chain' methods for '{,Pin}Init<T, E>' that allow to
     execute a closure on the value directly after initialization, e.g.:

         let foo = init!(Foo {
             buf <- init::zeroed()
         }).chain(|foo| {
             foo.setup();
             Ok(())
         });

   - Support arbitrary paths in init macros, instead of just identifiers
     and generic types.

   - Implement the 'Zeroable' trait for the 'UnsafeCell<T>' and
     'Opaque<T>' types.

   - Make initializer values inaccessible after initialization.

   - Make guards in the init macros hygienic.

  'allocator' module:

   - Use 'krealloc_aligned()' in 'KernelAllocator::alloc' preventing
     misaligned allocations when the Rust 1.71.1 upgrade is applied
     later in this pull.

     The equivalent fix for the previous compiler version (where
     'KernelAllocator' is not yet used) was merged into 6.5 already,
     which added the 'krealloc_aligned()' function used here.

   - Implement 'KernelAllocator::{realloc, alloc_zeroed}' for
     performance, using 'krealloc_aligned()' too, which forwards the
     call to the C API.

  'types' module:

   - Make 'Opaque' be '!Unpin', removing the need to add a
     'PhantomPinned' field to Rust structs that contain C structs which
     must not be moved.

   - Make 'Opaque' use 'UnsafeCell' as the outer type, rather than
     inner.

  Documentation:

   - Suggest obtaining the source code of the Rust's 'core' library
     using the tarball instead of the repository.

  MAINTAINERS:

   - Andreas and Alice, from Samsung and Google respectively, are
     joining as reviewers of the "RUST" entry.

  As well as a few other minor changes and cleanups"

* tag 'rust-6.6' of https://github.com/Rust-for-Linux/linux: (42 commits)
  rust: init: update expanded macro explanation
  rust: init: add `{pin_}chain` functions to `{Pin}Init<T, E>`
  rust: init: make `PinInit<T, E>` a supertrait of `Init<T, E>`
  rust: init: implement `Zeroable` for `UnsafeCell<T>` and `Opaque<T>`
  rust: init: add support for arbitrary paths in init macros
  rust: init: add functions to create array initializers
  rust: init: add `..Zeroable::zeroed()` syntax for zeroing all missing fields
  rust: init: make initializer values inaccessible after initializing
  rust: init: wrap type checking struct initializers in a closure
  rust: init: make guards in the init macros hygienic
  rust: add derive macro for `Zeroable`
  rust: init: make `#[pin_data]` compatible with conditional compilation of fields
  rust: init: consolidate init macros
  docs: rust: clarify what 'rustup override' does
  docs: rust: update instructions for obtaining 'core' source
  docs: rust: add command line to rust-analyzer section
  scripts: generate_rust_analyzer: provide `cfg`s for `core` and `alloc`
  rust: bindgen: upgrade to 0.65.1
  rust: enable `no_mangle_with_rust_abi` Clippy lint
  rust: upgrade to Rust 1.71.1
  ...

Pull tpm updates from Jarkko Sakkinen:

 - Restrict linking of keys to .ima and .evm keyrings based on
   digitalSignature attribute in the certificate

 - PowerVM: load machine owner keys into the .machine [1] keyring

 - PowerVM: load module signing keys into the secondary trusted keyring
   (keys blessed by the vendor)

 - tpm_tis_spi: half-duplex transfer mode

 - tpm_tis: retry corrupted transfers

 - Apply revocation list (.mokx) to an all system keyrings (e.g.
   .machine keyring)

Link: https://blogs.oracle.com/linux/post/the-machine-keyring [1]

* tag 'tpmdd-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
  certs: Reference revocation list for all keyrings
  tpm/tpm_tis_synquacer: Use module_platform_driver macro to simplify the code
  tpm: remove redundant variable len
  tpm_tis: Resend command to recover from data transfer errors
  tpm_tis: Use responseRetry to recover from data transfer errors
  tpm_tis: Move CRC check to generic send routine
  tpm_tis_spi: Add hardware wait polling
  KEYS: Replace all non-returning strlcpy with strscpy
  integrity: PowerVM support for loading third party code signing keys
  integrity: PowerVM machine keyring enablement
  integrity: check whether imputed trust is enabled
  integrity: remove global variable from machine_keyring.c
  integrity: ignore keys failing CA restrictions on non-UEFI platform
  integrity: PowerVM support for loading CA keys on machine keyring
  integrity: Enforce digitalSignature usage in the ima and evm keyrings
  KEYS: DigitalSignature link restriction
  tpm_tis: Revert "tpm_tis: Disable interrupts on ThinkPad T490s"

Merge in late fixes to prepare for the 6.6 net-next PR.

No conflicts.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Merge tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull nolibc updates from Shuah Khan:
 "Nolibc:
   - improved portability by removing build errors with -ENOSYS
   - added syscall6() on MIPS to support pselect6() and mmap()
   - added setvbuf(), rmdir(), pipe(), pipe2()
   - add support for ppc/ppc64
   - environ is no longer optional
   - fixed frame pointer issues at -O0
   - dropped sys_stat() in favor of sys_statx()
   - centralized _start_c() to remove lots of asm code
   - switched size_t to __SIZE_TYPE__

  Selftests:
   - improved status reporting (success/warning/failure counts, path to
     log file)
   - various code cleanups (indent, unused variables, ...)
   - more consistent test numbering
   - enabled compiler warnings
   - dropped unreliable chmod_net test
   - improved reliability (create /dev/zero & /tmp, rely less on /proc)
   - new tests (brk/sbrk/mmap/munmap)
   - improved compatibility with musl
   - new run-nolibc-test target to build and run natively
   - new run-libc-test target to build and run against native libc
   - made the cmdline parser more reliable against boolean arguments
   - dropped dependency on memfd for vfprintf() test
   - nolibc-test is no longer stripped
   - added support for extending ARCH via XARCH

  Other:
   - add Thomas as co-maintainer"

* tag 'linux-kselftest-nolibc-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (103 commits)
  tools/nolibc: avoid undesired casts in the __sysret() macro
  tools/nolibc: keep brk(), sbrk(), mmap() away from __sysret()
  tools/nolibc: silence ppc64 compile warnings
  selftests/nolibc: libc-test: use HOSTCC instead of CC
  tools/nolibc: stackprotector.h: make __stack_chk_init static
  selftests/nolibc: allow report with existing test log
  selftests/nolibc: add test support for ppc64
  selftests/nolibc: add test support for ppc64le
  selftests/nolibc: add test support for ppc
  selftests/nolibc: add XARCH and ARCH mapping support
  tools/nolibc: add support for powerpc64
  tools/nolibc: add support for powerpc
  MAINTAINERS: nolibc: add myself as co-maintainer
  selftests/nolibc: enable compiler warnings
  selftests/nolibc: don't strip nolibc-test
  selftests/nolibc: prevent out of bounds access in expect_vfprintf
  selftests/nolibc: use correct return type for read() and write()
  selftests/nolibc: avoid sign-compare warnings
  selftests/nolibc: avoid unused parameter warnings
  selftests/nolibc: make functions static if possible
  ...

Merge tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit updates from Shuah Khan:

 - add support for running Rust documentation tests as KUnit tests

 - make init, str, sync, types doctests compilable/testable

 - add support for attributes API which include speed, modules
   attributes, ability to filter and report attributes

 - add support for marking tests slow using attributes API

 - add attributes API documentation

 - fix a wild-memory-access bug in kunit_filter_suites() and a possible
   memory leak in kunit_filter_suites()

 - add support for counting number of test suites in a module, list
   action to kunit test modules, and test filtering on module tests

* tag 'linux-kselftest-kunit-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (25 commits)
  kunit: fix struct kunit_attr header
  kunit: replace KUNIT_TRIGGER_STATIC_STUB maro with KUNIT_STATIC_STUB_REDIRECT
  kunit: Allow kunit test modules to use test filtering
  kunit: Make 'list' action available to kunit test modules
  kunit: Report the count of test suites in a module
  kunit: fix uninitialized variables bug in attributes filtering
  kunit: fix possible memory leak in kunit_filter_suites()
  kunit: fix wild-memory-access bug in kunit_filter_suites()
  kunit: Add documentation of KUnit test attributes
  kunit: add tests for filtering attributes
  kunit: time: Mark test as slow using test attributes
  kunit: memcpy: Mark tests as slow using test attributes
  kunit: tool: Add command line interface to filter and report attributes
  kunit: Add ability to filter attributes
  kunit: Add module attribute
  kunit: Add speed attribute
  kunit: Add test attributes API structure
  MAINTAINERS: add Rust KUnit files to the KUnit entry
  rust: support running Rust documentation tests as KUnit ones
  rust: types: make doctests compilable/testable
  ...

Merge tag 'linux-kselftest-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:
 "A mix of fixes, enhancements, and new tests. Bulk of the changes
  enhance and fix rseq and resctrl tests.

  In addition, user_events, dmabuf-heaps and perf_events are added to
  default kselftest build and test coverage. A futex test fix, enhance
  prctl test coverage, and minor fixes are included in this update"

* tag 'linux-kselftest-next-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (32 commits)
  selftests: cachestat: use proper syscall number macro
  selftests: cachestat: properly link in librt
  selftests/futex: Order calls to futex_lock_pi
  selftests: Hook more tests into the build infrastructure
  selftests/user_events: Reenable build
  selftests/filesystems: Add six consecutive 'x' characters to mktemp
  selftests/rseq: Use rseq_unqual_scalar_typeof in macros
  selftests/rseq: Fix arm64 buggy load-acquire/store-release macros
  selftests/rseq: Implement rseq_unqual_scalar_typeof
  selftests/rseq: Fix CID_ID typo in Makefile
  selftests:prctl: add set-process-name to .gitignore
  selftests:prctl: Fix make clean override warning
  selftests/resctrl: Remove test type checks from cat_val()
  selftests/resctrl: Pass the real number of tests to show_cache_info()
  selftests/resctrl: Move CAT/CMT test global vars to function they are used in
  selftests/resctrl: Don't use variable argument list for ->setup()
  selftests/resctrl: Don't pass test name to fill_buf
  selftests/resctrl: Improve parameter consistency in fill_buf
  selftests/resctrl: Remove unnecessary startptr global from fill_buf
  selftests/resctrl: Remove "malloc_and_init_memory" param from run_fill_buf()
  ...

Pull thermal control updates from Rafael Wysocki:
 "These rework the Intel DTS IOSF and the ACPI thermal drivers to pass
  tables of generic trip point structures to the core during
  initialization and make some requisite modifications in the thermal
  core, fix a few issues elsewhere and clean up code.

  This includes changes that are present in the ACPI updates too,
  because they involve both ACPI and the thermal core. The list of
  specific changes below is limited to thermal control, however.

  Specifics:

   - Make the ACPI thermal driver use its own Notify() handler (Michal
     Wilczynski)

   - Rework the ACPI thermal driver to use a table of generic trip point
     structures on top of the internal representation of trip points and
     remove thermal zone callbacks that are not necessary any more from
     that driver (Rafael Wysocki)

   - Fix a few issues in the Intel DTS IOSF thermal driver, clean up
     code in it and make it pass tables of generic trip point structures
     to the core during thermal zone registration (Rafael Wysocki)

   - Drop a redundant check from the Intel DTS IOSF thermal driver's
     "remove" routine (Zhang Rui)

   - Use module_platform_driver() to replace an open-coded counterpart
     of it in the int340x thermal driver (Yang Yingliang)

   - Fix possible uninitialized value access in __thermal_of_bind() and
     __thermal_of_unbind() (Peng Fan)

   - Make the int3400 driver use thermal zone device wrappers (Daniel
     Lezcano)

   - Remove redundant thermal zone state check from the int340x thermal
     driver (Daniel Lezcano)

   - Drop non-functional nocrt parameter from ACPI thermal (Mario
     Limonciello)

   - Explicitly include correct DT includes in the thermal core and
     drivers (Rob Herring)"

* tag 'thermal-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: intel: intel_soc_dts_iosf: Remove redundant check
  thermal: intel: int340x: simplify the code with module_platform_driver()
  thermal/of: Fix potential uninitialized value access
  thermal: intel: intel_soc_dts_iosf: Use struct thermal_trip
  thermal: intel: intel_soc_dts_iosf: Rework critical trip setup
  thermal: intel: intel_soc_dts_iosf: Add helper for resetting trip points
  thermal: intel: intel_soc_dts_iosf: Change initialization ordering
  thermal: intel: intel_soc_dts_iosf: Pass sensors to update_trip_temp()
  thermal: intel: intel_soc_dts_iosf: Untangle update_trip_temp()
  thermal: intel: intel_soc_dts_iosf: Always assume notification support
  thermal: intel: intel_soc_dts_iosf: Drop redundant symbol definition
  thermal: intel: intel_soc_dts_iosf: Always use 2 trips
  thermal: Explicitly include correct DT includes
  thermal/drivers/int340x: Do not check the thermal zone state
  thermal/drivers/int3400: Use thermal zone device wrappers

Pull power management updates from Rafael Wysocki:
 "These rework cpuidle governors to call tick_nohz_get_sleep_length()
  less often and fix one of them, rework hibernation to avoid storing
  pages filled with zeros in hibernation images, switch over some
  cpufreq drivers to use void remove callbacks, fix and clean up
  multiple cpufreq drivers, fix the devfreq core, update the cpupower
  utility and make other assorted improvements.

  Specifics:

   - Rework the menu and teo cpuidle governors to avoid calling
     tick_nohz_get_sleep_length(), which is likely to become quite
     expensive going forward, too often and improve making decisions
     regarding whether or not to stop the scheduler tick in the teo
     governor (Rafael Wysocki)

   - Improve the performance of cpufreq_stats_create_table() in some
     cases (Liao Chang)

   - Fix two issues in the amd-pstate-ut cpufreq driver (Swapnil Sapkal)

   - Use clamp() helper macro to improve the code readability in
     cpufreq_verify_within_limits() (Liao Chang)

   - Set stale CPU frequency to minimum in intel_pstate (Doug Smythies)

   - Migrate cpufreq drivers for various platforms to use void remove
     callback (Yangtao Li)

   - Add online/offline/exit hooks for Tegra driver (Sumit Gupta)

   - Explicitly include correct DT includes in cpufreq (Rob Herring)

   - Frequency domain updates for qcom-hw driver (Neil Armstrong)

   - Modify AMD pstate driver return the highest_perf value (Meng Li)

   - Generic cleanups for cppc, mediatek and powernow driver (Liao
     Chang, Konrad Dybcio)

   - Add more platforms to cpufreq-arm driver's blocklist
     (AngeloGioacchino Del Regno and Konrad Dybcio)

   - brcmstb-avs-cpufreq: Fix -Warray-bounds bug (Gustavo A. R. Silva)

   - Add device PM helpers to allow a device to remain powered-on during
     system-wide transitions (Ulf Hansson)

   - Rework hibernation memory snapshotting to avoid storing pages
     filled with zeros in hibernation image files (Brian Geffon)

   - Add check to make sure that CPU latency QoS constraints do not use
     negative values (Clive Lin)

   - Optimize rp->domains memory allocation in the Intel RAPL power
     capping driver (xiongxin)

   - Remove recursion while parsing zones in the arm_scmi power capping
     driver (Cristian Marussi)

   - Fix memory leak in devfreq_dev_release() (Boris Brezillon)

   - Rewrite devfreq_monitor_start() kerneldoc comment (Manivannan
     Sadhasivam)

   - Explicitly include correct DT includes in devfreq (Rob Herring)

   - Remove unsued pm_runtime_update_max_time_suspended() extern
     declaration (YueHaibing)

   - Add turbo-boost support to cpupower (Wyes Karny)

   - Add support for amd_pstate mode change to cpupower (Wyes Karny)

   - Fix 'cpupower idle_set' command to accept only numeric values of
     arguments (Likhitha Korrapati)

   - Clean up OPP code and add new frequency related APIs to it (Viresh
     Kumar, Manivannan Sadhasivam)

   - Convert ti cpufreq/opp bindings to json schema (Nishanth Menon)"

* tag 'pm-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (74 commits)
  cpufreq: tegra194: remove opp table in exit hook
  cpufreq: powernow-k8: Use related_cpus instead of cpus in driver.exit()
  cpufreq: tegra194: add online/offline hooks
  cpuidle: teo: Avoid unnecessary variable assignments
  cpufreq: qcom-cpufreq-hw: add support for 4 freq domains
  dt-bindings: cpufreq: qcom-hw: add a 4th frequency domain
  cpufreq: amd-pstate-ut: Fix kernel panic when loading the driver
  cpufreq: amd-pstate-ut: Remove module parameter access
  cpufreq: Use clamp() helper macro to improve the code readability
  PM: sleep: Add helpers to allow a device to remain powered-on
  PM: QoS: Add check to make sure CPU latency is non-negative
  PM: runtime: Remove unsued extern declaration of pm_runtime_update_max_time_suspended()
  cpufreq: intel_pstate: set stale CPU frequency to minimum
  cpufreq: stats: Improve the performance of cpufreq_stats_create_table()
  dt-bindings: cpufreq: Convert ti-cpufreq to json schema
  dt-bindings: opp: Convert ti-omap5-opp-supply to json schema
  OPP: Fix argument name in doc comment
  cpuidle: menu: Skip tick_nohz_get_sleep_length() call in some cases
  cpufreq: cppc: Set fie_disabled to FIE_DISABLED if fails to create kworker_fie
  cpufreq: cppc: cppc_cpufreq_get_rate() returns zero in all error cases.
  ...

Pull ACPI updates from Rafael Wysocki:
 "These include new ACPICA material, a rework of the ACPI thermal
  driver, a switch-over of the ACPI processor driver to using _OSC
  instead of (long deprecated) _PDC for CPU initialization, a rework of
  firmware notifications handling in several drivers, fixes and cleanups
  for suspend-to-idle handling on AMD systems, ACPI backlight driver
  updates and more.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20230628
     including the following changes:
      - Suppress a GCC 12 dangling-pointer warning (Philip Prindeville)
      - Reformat the ACPI_STATE_COMMON macro and its users (George Guo)
      - Replace the ternary operator with ACPI_MIN() (Jiangshan Yi)
      - Add support for _DSC as per ACPI 6.5 (Saket Dumbre)
      - Remove a duplicate macro from zephyr header (Najumon B.A)
      - Add data structures for GED and _EVT tracking (Jose Marinho)
      - Fix misspelled CDAT DSMAS define (Dave Jiang)
      - Simplify an error message in acpi_ds_result_push() (Christophe
        Jaillet)
      - Add a struct size macro related to SRAT (Dave Jiang)
      - Add AML_NO_OPERAND_RESOLVE flag to Timer (Abhishek Mainkar)
      - Add support for RISC-V external interrupt controllers in MADT
        (Sunil V L)
      - Add RHCT flags, CMO and MMU nodes (Sunil V L)
      - Change ACPICA version to 20230628 (Bob Moore)

   - Introduce new wrappers for ACPICA notify handler install/remove and
     convert multiple drivers to using their own Notify() handlers
     instead of the ACPI bus type .notify() slated for removal (Michal
     Wilczynski)

   - Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
     (Hans de Goede)

   - Put ACPI video and its child devices explicitly into D0 on boot to
     avoid platform firmware confusion (Kai-Heng Feng)

   - Add backlight=native DMI quirk for Lenovo Ideapad Z470 (Jiri Slaby)

   - Support obtaining physical CPU ID from MADT on LoongArch (Bibo Mao)

   - Convert ACPI CPU initialization to using _OSC instead of _PDC that
     has been depreceted since 2018 and dropped from the specification
     in ACPI 6.5 (Michal Wilczynski, Rafael Wysocki)

   - Drop non-functional nocrt parameter from ACPI thermal (Mario
     Limonciello)

   - Clean up the ACPI thermal driver, rework the handling of firmware
     notifications in it and make it provide a table of generic trip
     point structures to the core during initialization (Rafael Wysocki)

   - Defer enumeration of devices with _DEP pointing to IVSC (Wentong
     Wu)

   - Install SystemCMOS address space handler for ACPI000E (TAD) to meet
     platform firmware expectations on some platforms (Zhang Rui)

   - Fix finding the generic error data in the ACPi extlog driver for
     compatibility with old and new firmware interface versions
     (Xiaochun Lee)

   - Remove assorted unused declarations of functions (Yue Haibing)

   - Move AMBA bus scan handling into arm64 specific directory (Sudeep
     Holla)

   - Fix and clean up suspend-to-idle interface for AMD systems (Mario
     Limonciello, Andy Shevchenko)

   - Fix string truncation warning in pnpacpi_add_device() (Sunil V L)"

* tag 'acpi-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (66 commits)
  ACPI: x86: s2idle: Add a function to get LPS0 constraint for a device
  ACPI: x86: s2idle: Add for_each_lpi_constraint() helper
  ACPI: x86: s2idle: Add more debugging for AMD constraints parsing
  ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table
  ACPI: x86: s2idle: Catch multiple ACPI_TYPE_PACKAGE objects
  ACPI: x86: s2idle: Post-increment variables when getting constraints
  ACPI: Adjust #ifdef for *_lps0_dev use
  ACPI: TAD: Install SystemCMOS address space handler for ACPI000E
  ACPI: Remove assorted unused declarations of functions
  ACPI: extlog: Fix finding the generic error data for v3 structure
  PNP: ACPI: Fix string truncation warning
  ACPI: Remove unused extern declaration acpi_paddr_to_node()
  ACPI: video: Add backlight=native DMI quirk for Apple iMac12,1 and iMac12,2
  ACPI: video: Put ACPI video and its child devices into D0 on boot
  ACPI: processor: LoongArch: Get physical ID from MADT
  ACPI: scan: Defer enumeration of devices with a _DEP pointing to IVSC device
  ACPI: thermal: Eliminate code duplication from acpi_thermal_notify()
  ACPI: thermal: Drop unnecessary thermal zone callbacks
  ACPI: thermal: Rework thermal_get_trend()
  ACPI: thermal: Use trip point table to register thermal zones
  ...

Merge tag 'tag-chrome-platform-firmware-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform firmware update from Tzung-Bi Shih:

 - Add MAINTAINERS entry for chrome platform firmware

* tag 'tag-chrome-platform-firmware-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  MAINTAINERS: Add drivers/firmware/google/ entry

Merge tag 'tag-chrome-platform-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform updates from Tzung-Bi Shih:
 "Improvements:

  - Remove shutdown timeout on EC panic for offering the filesystem a
    chance to sync

  - Support official HID "GOOG0016" for ChromeOS ACPI

  Fixes:

  - Print hex string instead of using "%s" for ACPI_TYPE_BUFFER

  Misc:

  - Update MAINTAINERS"

* tag 'tag-chrome-platform-for-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: chromeos_acpi: print hex string for ACPI_TYPE_BUFFER
  platform/chrome: chromeos_acpi: support official HID GOOG0016
  platform/chrome: cros_ec_lpc: Remove EC panic shutdown timeout
  MAINTAINERS: update maintainers of chrome-platform

Pull xen updates from Juergen Gross:

 - a bunch of minor cleanups

 - a patch adding irqfd support for virtio backends running as user
   daemon supporting Xen guests

* tag 'for-linus-6.6-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: privcmd: Add support for irqfd
  xen/xenbus: Avoid a lockdep warning when adding a watch
  xen: Fix one kernel-doc comment
  xen: xenbus: Use helper function IS_ERR_OR_NULL()
  xen: Switch to use kmemdup() helper
  xen-pciback: Remove unused function declarations
  x86/xen: Make virt_to_pfn() a static inline
  xen: remove a confusing comment on auto-translated guest I/O
  xen/evtchn: Remove unused function declaration xen_set_affinity_evtchn()

Pull arm64 updates from Will Deacon:
 "I think we have a bit less than usual on the architecture side, but
  that's somewhat balanced out by a large crop of perf/PMU driver
  updates and extensions to our selftests.

  CPU features and system registers:

   - Advertise hinted conditional branch support (FEAT_HBC) to userspace

   - Avoid false positive "SANITY CHECK" warning when xCR registers
     differ outside of the length field

  Documentation:

   - Fix macro name typo in SME documentation

  Entry code:

   - Unmask exceptions earlier on the system call entry path

  Memory management:

   - Don't bother clearing PTE_RDONLY for dirty ptes in pte_wrprotect()
     and pte_modify()

  Perf and PMU drivers:

   - Initial support for Coresight TRBE devices on ACPI systems (the
     coresight driver changes will come later)

   - Fix hw_breakpoint single-stepping when called from bpf

   - Fixes for DDR PMU on i.MX8MP SoC

   - Add NUMA-awareness to Hisilicon PCIe PMU driver

   - Fix locking dependency issue in Arm DMC620 PMU driver

   - Workaround Hisilicon erratum 162001900 in the SMMUv3 PMU driver

   - Add support for Arm CMN-700 r3 parts to the CMN PMU driver

   - Add support for recent Arm Cortex CPU PMUs

   - Update Hisilicon PMU maintainers

  Selftests:

   - Add a bunch of new features to the hwcap test (JSCVT, PMULL, AES,
     SHA1, etc)

   - Fix SSVE test to leave streaming-mode after grabbing the signal
     context

   - Add new test for SVE vector-length changes with SME enabled

  Miscellaneous:

   - Allow compiler to warn on suspicious looking system register
     expressions

   - Work around SDEI firmware bug by aborting any running handlers on a
     kernel crash

   - Fix some harmless warnings when building with W=1

   - Remove some unused function declarations

   - Other minor fixes and cleanup"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (62 commits)
  drivers/perf: hisi: Update HiSilicon PMU maintainers
  arm_pmu: acpi: Add a representative platform device for TRBE
  arm_pmu: acpi: Refactor arm_spe_acpi_register_device()
  kselftest/arm64: Fix hwcaps selftest build
  hw_breakpoint: fix single-stepping when using bpf_overflow_handler
  arm64/sysreg: refactor deprecated strncpy
  kselftest/arm64: add jscvt feature to hwcap test
  kselftest/arm64: add pmull feature to hwcap test
  kselftest/arm64: add AES feature check to hwcap test
  kselftest/arm64: add SHA1 and related features to hwcap test
  arm64: sysreg: Generate C compiler warnings on {read,write}_sysreg_s arguments
  kselftest/arm64: build BTI tests in output directory
  perf/imx_ddr: don't enable counter0 if none of 4 counters are used
  perf/imx_ddr: speed up overflow frequency of cycle
  drivers/perf: hisi: Schedule perf session according to locality
  kselftest/arm64: fix a memleak in zt_regs_run()
  perf/arm-dmc620: Fix dmc620_pmu_irqs_lock/cpu_hotplug_lock circular lock dependency
  perf/smmuv3: Add MODULE_ALIAS for module auto loading
  perf/smmuv3: Enable HiSilicon Erratum 162001900 quirk for HIP08/09
  kselftest/arm64: Size sycall-abi buffers for the actual maximum VL
  ...

Pull m68k updates from Geert Uytterhoeven:

 - Remove <asm/export.h>

 - Miscellaneous W=1 fixes

 - defconfig updates

* tag 'm68k-for-v6.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  zorro: Include zorro.h in names.c
  m68k: Add memcmp() declaration
  m68k: Define __div64_32() to avoid a warning
  m68k: Remove <asm/export.h>
  m68k: Replace #include <asm/export.h> with #include <linux/export.h>
  m68k: defconfig: Update defconfigs for v6.5-rc1

Pull s390 updates from Heiko Carstens:

 - Add vfio-ap support to pass-through crypto devices to secure
   execution guests

 - Add API ordinal 6 support to zcrypt_ep11misc device drive, which is
   required to handle key generate and key derive (e.g. secure key to
   protected key) correctly

 - Add missing secure/has_secure sysfs files for the case where it is
   not possible to figure where a system has been booted from. Existing
   user space relies on that these files are always present

 - Fix DCSS block device driver list corruption, caused by incorrect
   error handling

 - Convert virt_to_pfn() and pfn_to_virt() from defines to static inline
   functions to enforce type checking

 - Cleanups, improvements, and minor fixes to the kernel mapping setup

 - Fix various virtual vs physical address confusions

 - Move pfault code to separate file, since it has nothing to do with
   regular fault handling

 - Move s390 documentation to Documentation/arch/ like it has been done
   for other architectures already

 - Add HAVE_FUNCTION_GRAPH_RETVAL support

 - Factor out the s390_hypfs filesystem and add a new config option for
   it. The filesystem is deprecated and as soon as all users are gone it
   can be removed some time in the not so near future

 - Remove support for old CEX2 and CEX3 crypto cards from zcrypt device
   driver

 - Add support for user-defined certificates: receive user-defined
   certificates with a diagnose call and provide them via 'cert_store'
   keyring to user space

 - Couple of other small fixes and improvements all over the place

* tag 's390-6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (66 commits)
  s390/pci: use builtin_misc_device macro to simplify the code
  s390/vfio-ap: make sure nib is shared
  KVM: s390: export kvm_s390_pv*_is_protected functions
  s390/uv: export uv_pin_shared for direct usage
  s390/vfio-ap: check for TAPQ response codes 0x35 and 0x36
  s390/vfio-ap: handle queue state change in progress on reset
  s390/vfio-ap: use work struct to verify queue reset
  s390/vfio-ap: store entire AP queue status word with the queue object
  s390/vfio-ap: remove upper limit on wait for queue reset to complete
  s390/vfio-ap: allow deconfigured queue to be passed through to a guest
  s390/vfio-ap: wait for response code 05 to clear on queue reset
  s390/vfio-ap: clean up irq resources if possible
  s390/vfio-ap: no need to check the 'E' and 'I' bits in APQSW after TAPQ
  s390/ipl: refactor deprecated strncpy
  s390/ipl: fix virtual vs physical address confusion
  s390/zcrypt_ep11misc: support API ordinal 6 with empty pin-blob
  s390/paes: fix PKEY_TYPE_EP11_AES handling for secure keyblobs
  s390/pkey: fix PKEY_TYPE_EP11_AES handling for sysfs attributes
  s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_VERIFYKEY2 IOCTL
  s390/pkey: fix PKEY_TYPE_EP11_AES handling in PKEY_KBLOB2PROTK[23]
  ...

Pull misc x86 cleanups from Ingo Molnar:
 "The following commit deserves special mention:

   22dc02f8 Revert "sched/fair: Move unused stub functions to header"

  This is in x86/cleanups, because the revert is a re-application of a
  number of cleanups that got removed inadvertedly"

[ This also effectively undoes the amd_check_microcode() microcode
  declaration change I had done in my microcode loader merge in commit
  42a7f6e3 ("Merge tag 'x86_microcode_for_v6.6_rc1' [...]").

  I picked the declaration change by Arnd from this branch instead,
  which put it in <asm/processor.h> instead of <asm/microcode.h> like I
  had done in my merge resolution   - Linus ]

* tag 'x86-cleanups-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/platform/uv: Refactor code using deprecated strncpy() interface to use strscpy()
  x86/hpet: Refactor code using deprecated strncpy() interface to use strscpy()
  x86/platform/uv: Refactor code using deprecated strcpy()/strncpy() interfaces to use strscpy()
  x86/qspinlock-paravirt: Fix missing-prototype warning
  x86/paravirt: Silence unused native_pv_lock_init() function warning
  x86/alternative: Add a __alt_reloc_selftest() prototype
  x86/purgatory: Include header for warn() declaration
  x86/asm: Avoid unneeded __div64_32 function definition
  Revert "sched/fair: Move unused stub functions to header"
  x86/apic: Hide unused safe_smp_processor_id() on 32-bit UP
  x86/cpu: Fix amd_check_microcode() declaration

Pull scheduler updates from Ingo Molnar:

 - The biggest change is introduction of a new iteration of the
   SCHED_FAIR interactivity code: the EEVDF ("Earliest Eligible Virtual
   Deadline First") scheduler

   EEVDF too is a virtual-time scheduler, with two parameters (weight
   and relative deadline), compared to CFS that had weight only. It
   completely reworks the base scheduler: placement, preemption, picking
   -- everything

   LWN.net, as usual, has a terrific writeup about EEVDF:

      https://lwn.net/Articles/925371/

   Preemption (both tick and wakeup) is driven by testing against a
   fresh pick. Because the tree is now effectively an interval tree, and
   the selection is no longer the 'leftmost' task, over-scheduling is
   less of a problem. A lot of the CFS heuristics are removed or
   replaced by more natural latency-space parameters & constructs

   In terms of expected performance regressions: we will and can fix
   everything where a 'good' workload misbehaves with the new scheduler,
   but EEVDF inevitably changes workload scheduling in a binary fashion,
   hopefully for the better in the overwhelming majority of cases, but
   in some cases it won't, especially in adversarial loads that got
   lucky with the previous code, such as some variants of hackbench. We
   are trying hard to err on the side of fixing all performance
   regressions, but we expect some inevitable post-release iterations of
   that process

 - Improve load-balancing on hybrid x86 systems: enable cluster
   scheduling (again)

 - Improve & fix bandwidth-scheduling on nohz systems

 - Improve bandwidth-throttling

 - Use lock guards to simplify and de-goto-ify control flow

 - Misc improvements, cleanups and fixes

* tag 'sched-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (43 commits)
  sched/eevdf/doc: Modify the documented knob to base_slice_ns as well
  sched/eevdf: Curb wakeup-preemption
  sched: Simplify sched_core_cpu_{starting,deactivate}()
  sched: Simplify try_steal_cookie()
  sched: Simplify sched_tick_remote()
  sched: Simplify sched_exec()
  sched: Simplify ttwu()
  sched: Simplify wake_up_if_idle()
  sched: Simplify: migrate_swap_stop()
  sched: Simplify sysctl_sched_uclamp_handler()
  sched: Simplify get_nohz_timer_target()
  sched/rt: sysctl_sched_rr_timeslice show default timeslice after reset
  sched/rt: Fix sysctl_sched_rr_timeslice intial value
  sched/fair: Block nohz tick_stop when cfs bandwidth in use
  sched, cgroup: Restore meaning to hierarchical_quota
  MAINTAINERS: Add Peter explicitly to the psi section
  sched/psi: Select KERNFS as needed
  sched/topology: Align group flags when removing degenerate domain
  sched/fair: remove util_est boosting
  sched/fair: Propagate enqueue flags into place_entity()
  ...

Pull perf event updates from Ingo Molnar:

 - AMD IBS improvements

 - Intel PMU driver updates

 - Extend core perf facilities & the ARM PMU driver to better handle ARM big.LITTLE events

 - Micro-optimize software events and the ring-buffer code

 - Misc cleanups & fixes

* tag 'perf-core-2023-08-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore: Remove unnecessary ?: operator around pcibios_err_to_errno() call
  perf/x86/intel: Add Crestmont PMU
  x86/cpu: Update Hybrids
  x86/cpu: Fix Crestmont uarch
  x86/cpu: Fix Gracemont uarch
  perf: Remove unused extern declaration arch_perf_get_page_size()
  perf: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
  arm_pmu: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
  perf/x86: Remove unused PERF_PMU_CAP_HETEROGENEOUS_CPUS capability
  arm_pmu: Add PERF_PMU_CAP_EXTENDED_HW_TYPE capability
  perf/x86/ibs: Set mem_lvl_num, mem_remote and mem_hops for data_src
  perf/mem: Add PERF_MEM_LVLNUM_NA to PERF_MEM_NA
  perf/mem: Introduce PERF_MEM_LVLNUM_UNC
  perf/ring_buffer: Use local_try_cmpxchg in __perf_output_begin
  locking/arch: Avoid variable shadowing in local_try_cmpxchg()
  perf/core: Use local64_try_cmpxchg in perf_swevent_set_period
  perf/x86: Use local64_try_cmpxchg
  perf/amd: Prevent grouping of IBS events