Merge tag 'regulator-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "An addition to MAINTAINERS plus a fix for a nasty bootstrapping
  problem which caused problems when we need to read the voltage of a
  regulator that is not yet available during initialization, we were not
  correctly distinguishing between this case and the case where a
  regulator is put into a bypass mode"

* tag 'regulator-fix-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: defer probe when trying to get voltage from unresolved supply
  MAINTAINERS: Add entry for Qualcomm IPQ4019 VQMMC regulator

Pull power management fixes from Rafael Wysocki:
 "These fix the device links support in runtime PM, correct mistakes in
  the cpuidle documentation, fix the handling of policy limits changes
  in the schedutil cpufreq governor, fix assorted issues in the OPP
  (operating performance points) framework and make one janitorial
  change.

  Specifics:

   - Unify the handling of managed and stateless device links in the
     runtime PM framework and prevent runtime PM references to devices
     from being leaked after device link removal (Rafael Wysocki).

   - Fix two mistakes in the cpuidle documentation (Julia Lawall).

   - Prevent the schedutil cpufreq governor from missing policy limits
     updates in some cases (Viresh Kumar).

   - Prevent static OPPs from being dropped by mistake (Viresh Kumar).

   - Prevent helper function in the OPP framework from returning
     prematurely (Viresh Kumar).

   - Prevent opp_table_lock from being held too long during removal of
     OPP tables with no more active references (Viresh Kumar).

   - Drop redundant semicolon from the Intel RAPL power capping driver
     (Tom Rix)"

* tag 'pm-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: runtime: Resume the device earlier in __device_release_driver()
  PM: runtime: Drop pm_runtime_clean_up_links()
  PM: runtime: Drop runtime PM references to supplier on link removal
  powercap/intel_rapl: remove unneeded semicolon
  Documentation: PM: cpuidle: correct path name
  Documentation: PM: cpuidle: correct typo
  cpufreq: schedutil: Don't skip freq update if need_freq_update is set
  opp: Reduce the size of critical section in _opp_table_kref_release()
  opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
  opp: Don't always remove static OPPs in _of_add_opp_table_v1()

Pull highmem initialization fix from Mike Rapoport:
 "Fix highmem initialization on arm and xtensa

  Recent refactoring of memblock iterators has broken initialization of
  highmem on arm and xtensa because it changed the way beginning and end
  of memory regions are rounded to PFNs. This fix restores the original
  behaviour"

* tag 'fixes-2020-11-05' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  ARM, xtensa: highmem: avoid clobbering non-page aligned memory reservations

Pull gfs2 fixes from Andreas Gruenbacher:
 "Various gfs2 fixes"

* tag 'gfs2-v5.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: Wake up when sd_glock_disposal becomes zero
  gfs2: Don't call cancel_delayed_work_sync from within delete work function
  gfs2: check for live vs. read-only file system in gfs2_fitrim
  gfs2: don't initialize statfs_change inodes in spectator mode
  gfs2: Split up gfs2_meta_sync into inode and rgrp versions
  gfs2: init_journal's undo directive should also undo the statfs inodes
  gfs2: Add missing truncate_inode_pages_final for sd_aspace
  gfs2: Free rd_bits later in gfs2_clear_rgrpd to fix use-after-free

Pull PCI fixes from Bjorn Helgaas:

 - Fix ACS regression that broke device pass-through (Rajat Jain)

 - Revert DesignWare ATU memory resource to use last entry to fix
   Tegra194 regression (Rob Herring)

 - Remove duplicate mvebu resource requests to fix regression on Turris
   Omnia (Rob Herring)

* tag 'pci-v5.10-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  PCI: mvebu: Fix duplicate resource requests
  PCI: dwc: Restore ATU memory resource setup to use last entry
  PCI: Always enable ACS even if no ACS Capability

* pm-cpufreq:
  cpufreq: schedutil: Don't skip freq update if need_freq_update is set

* pm-cpuidle:
  Documentation: PM: cpuidle: correct path name
  Documentation: PM: cpuidle: correct typo

* pm-opp:
  opp: Reduce the size of critical section in _opp_table_kref_release()
  opp: Fix early exit from dev_pm_opp_register_set_opp_helper()
  opp: Don't always remove static OPPs in _of_add_opp_table_v1()

* powercap:
  powercap/intel_rapl: remove unneeded semicolon

With commit 669cbc70 ("PCI: Move DT resource setup into
devm_pci_alloc_host_bridge()"), the DT 'ranges' is parsed and populated
into resources when the host bridge is allocated. The resources are
requested as well, but that happens a second time for the mvebu driver in
mvebu_pcie_parse_request_resources(). We should only be requesting the
additional resources added in mvebu_pcie_parse_request_resources().  These
are not added by default because they use custom properties rather than
standard DT address translation.

Also, the bus ranges was also populated by default, so we can remove it
from mvebu_pci_host_probe().

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209729
Fixes: 669cbc70

 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()")
Link: https://lore.kernel.org/r/20201023145252.2691779-1-robh@kernel.org
Reported-by:  <vtolkm@googlemail.com>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Russell King <linux@armlinux.org.uk>

Prior to commit 0f71c60f ("PCI: dwc: Remove storing of PCI resources"),
the DWC driver was setting up the last memory resource rather than the
first memory resource. This doesn't matter for most platforms which only
have 1 memory resource, but it broke Tegra194 which has a 2nd
(prefetchable) memory region that requires an ATU entry. The first region
on Tegra194 relies on the default 1:1 pass-thru of outbound transactions
and doesn't need an ATU entry.

Fixes: 0f71c60f

 ("PCI: dwc: Remove storing of PCI resources")
Link: https://lore.kernel.org/r/20201026154852.221483-1-robh@kernel.org
Reported-by: Vidya Sagar <vidyas@nvidia.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>

free_highpages() iterates over the free memblock regions in high
memory, and marks each page as available for the memory management
system.

Until commit cddb5ddf ("arm, xtensa: simplify initialization of
high memory pages") it rounded beginning of each region upwards and end of
each region downwards.

However, after that commit free_highmem() rounds the beginning and end of
each region downwards, and we may end up freeing a page that is
memblock_reserve()d, resulting in memory corruption.

Restore the original rounding of the region boundaries to avoid freeing
reserved pages.

Fixes: cddb5ddf

 ("arm, xtensa: simplify initialization of high memory pages")
Link: https://lore.kernel.org/r/20201029110334.4118-1-ardb@kernel.org/
Link: https://lore.kernel.org/r/20201031094345.6984-1-rppt@kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Co-developed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Max Filippov <jcmvbkbc@gmail.com>

Merge tag 'perf-tools-for-v5.10-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:
 "Only fixes and a sync of the headers so that the perf build is silent:

   - Fix visibility attribute in python module init code with newer gcc

   - Fix DRAM_BW_Use 0 issue for CLX/SKX in intel JSON vendor event
     files

   - Fix the build on new fedora by removing LTO compiler options when
     building perl support

   - Remove broken __no_tail_call attribute

   - Fix segfault when trying to trace events by cgroup

   - Fix crash with non-jited BPF progs

   - Increase buffer size in TUI browser, fixing format truncation

   - Fix printing of build-id for objects lacking one

   - Fix byte swapping for ino_generation field in MMAP2 perf.data
     records

   - Fix byte swapping for CGROUP perf.data records, for cross arch
     analysis of perf.data files

   - Fix the fast path of feature detection

   - Update kernel header copies"

* tag 'perf-tools-for-v5.10-2020-11-03' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
  tools feature: Fixup fast path feature detection
  perf tools: Add missing swap for cgroup events
  perf tools: Add missing swap for ino_generation
  perf tools: Initialize output buffer in build_id__sprintf
  perf hists browser: Increase size of 'buf' in perf_evsel__hists_browse()
  tools include UAPI: Update linux/mount.h copy
  tools headers UAPI: Update tools's copy of linux/perf_event.h
  tools kvm headers: Update KVM headers from the kernel sources
  tools UAPI: Update copy of linux/mman.h from the kernel sources
  tools arch x86: Sync the msr-index.h copy with the kernel sources
  tools x86 headers: Update required-features.h header from the kernel
  tools x86 headers: Update cpufeatures.h headers copies
  tools headers UAPI: Update fscrypt.h copy
  tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
  tools headers UAPI: Sync prctl.h with the kernel sources
  perf scripting python: Avoid declaring function pointers with a visibility attribute
  perf tools: Remove broken __no_tail_call attribute
  perf vendor events: Fix DRAM_BW_Use 0 issue for CLX/SKX
  perf trace: Fix segfault when trying to trace events by cgroup
  perf tools: Fix crash with non-jited bpf progs
  ...

Pull documentation build warning fixes from Jonathan Corbet:
 "This contains a series of warning fixes from Mauro; once applied, the
  number of warnings from the once-noisy docs build process is nearly
  zero.

  Getting to this point has required a lot of work; once there,
  hopefully we can keep things that way.

  I have packaged this as a separate pull because it does a fair amount
  of reaching outside of Documentation/. The changes are all in comments
  and in code placement. It's all been in linux-next since last week"

* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
  docs: SafeSetID: fix a warning
  amdgpu: fix a few kernel-doc markup issues
  selftests: kselftest_harness.h: fix kernel-doc markups
  drm: amdgpu_dm: fix a typo
  gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
  drm: amdgpu: kernel-doc: update some adev parameters
  docs: fs: api-summary.rst: get rid of kernel-doc include
  IB/srpt: docs: add ...

Pull documentation fixes from Jonathan Corbet:
 "A small number of fixes, plus a build tweak to respect the desire for
  silence in V=0 builds"

* tag 'docs-5.10-3' of git://git.lwn.net/linux:
  docs: fix automarkup regression on Python 2
  documentation: arm: sunxi: add Allwinner H6 documents
  scripts: kernel-doc: split typedef complex regex
  scripts: kernel-doc: fix typedef parsing
  docs: Makefile: honor V=0 for docs building

Pull x86 SEV-ES fixes from Borislav Petkov:
 "A couple of changes to the SEV-ES code to perform more stringent
  hypervisor checks before enabling encryption (Joerg Roedel)"

* tag 'x86_seves_for_v5.10_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev-es: Do not support MMIO to/from encrypted memory
  x86/head/64: Check SEV encryption before switching to kernel page-table
  x86/boot/compressed/64: Check SEV encryption in 64-bit boot-path
  x86/boot/compressed/64: Sanity-check CPUID results in the early #VC handler
  x86/boot/compressed/64: Introduce sev_status

The cleanup for the yfs_store_opaque_acl2_operation calls the wrong
function to destroy the ACL content buffer.  It's an afs_acl struct, not
a yfs_acl struct - and the free function for latter may pass invalid
pointers to kfree().

Fix this by using the afs_acl_put() function.  The yfs_acl_put()
function is then no longer used and can be removed.

	general protection fault, probably for non-canonical address 0x7ebde00000000: 0000 [#1] SMP PTI
	...
	RIP: 0010:compound_head+0x0/0x11
	...
	Call Trace:
	 virt_to_cache+0x8/0x51
	 kfree+0x5d/0x79
	 yfs_free_opaque_acl+0x16/0x29
	 afs_put_operation+0x60/0x114
	 __vfs_setxattr+0x67/0x72
	 __vfs_setxattr_noperm+0x66/0xe9
	 vfs_setxattr+0x67/0xce
	 setxattr+0x14e/0x184
	 __do_sys_fsetxattr+0x66/0x8f
	 do_syscall_64+0x2d/0x3a
	 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: e49c7b2f

 ("afs: Build an abstraction around an "operation" concept")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When using the afs.yfs.acl xattr to change an AuriStor ACL, a warning
can be generated when the request is marshalled because the buffer
pointer isn't increased after adding the last element, thereby
triggering the check at the end if the ACL wasn't empty.  This just
causes something like the following warning, but doesn't stop the call
from happening successfully:

    kAFS: YFS.StoreOpaqueACL2: Request buffer underflow (36<108)

Fix this simply by increasing the count prior to the check.

Fixes: f5e45463

 ("afs: Implement YFS ACL setting")
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

It turns out that the Python 2 re module lacks the ASCII flag, so don't try
to use it there.

Fixes: f66e47f9

 ("docs: automarkup.py: Fix regexes to solve sphinx 3 warnings")
Reported-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

Commit fc0e38da ("GFS2: Fix glock deallocation race") fixed a
sd_glock_disposal accounting bug by adding a missing atomic_dec
statement, but it failed to wake up sd_glock_wait when that decrement
causes sd_glock_disposal to reach zero.  As a consequence,
gfs2_gl_hash_clear can now run into a 10-minute timeout instead of
being woken up.  Add the missing wakeup.

Fixes: fc0e38da

 ("GFS2: Fix glock deallocation race")
Cc: stable@vger.kernel.org # v2.6.39+
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

regulator_get_voltage_rdev() is called in regulator probe() when
applying machine constraints.  The "fixed" commit exposed the problem
that non-bypassed regulators can forward the request to its parent
(like bypassed ones) supply. Return -EPROBE_DEFER when the supply
is expected but not resolved yet.

Fixes: aea6cb99

 ("regulator: resolve supply after creating regulator")
Cc: stable@vger.kernel.org
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Reported-by: Ondřej Jirman <megous@megous.com>
Reported-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Tested-by: Ondřej Jirman <megous@megous.com>
Link: https://lore.kernel.org/r/a9041d68b4d35e4a2dd71629c8a6422662acb5ee.1604351936.git.mirq-linux@rere.qmqm.pl
Signed-off-by: Mark Brown <broonie@kernel.org>

22dd1ac9 ("tools: Remove feature-libelf-mmap feature detection")
correctly simplified the this feature detection, but forgot to remove
the call to the removed function in the main() function for the
test-all.c fast path feature detection, making it fail and thus do all
the feature detection individually, fix it.

  $ cat /tmp/build/perf/feature/test-all.make.output
  test-all.c: In function ‘main’:
  test-all.c:188:2: error: implicit declaration of function ‘main_test_libelf_mmap’; did you mean ‘main_test_libelf’? [-Werror=implicit-function-declaration]
    188 |  main_test_libelf_mmap();
        |  ^~~~~~~~~~~~~~~~~~~~~
        |  main_test_libelf
  cc1: all warnings being treated as errors
  $ vim tools/build/feature/test-all.c
  $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;make V=1 -k O=/tmp/build/perf  -C tools/perf install-bin ; perf test python
  <SNIP>
  $ cat /tmp/build/perf/feature/test-all.make.output
  $

Fixes: 22dd1ac9

 ("tools: Remove feature-libelf-mmap feature detection")
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

It was missed to add a swap function for PERF_RECORD_CGROUP.

Fixes: ba78c1c5

 ("perf tools: Basic support for CGROUP event")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201102140228.303657-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We are missing swap for ino_generation field.

Fixes: 5c5e854b

 ("perf tools: Add attr->mmap2 support")
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20201101233103.3537427-2-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

We display garbage for undefined build_id objects, because we don't
initialize the output buffer.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20201101233103.3537427-1-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Making perf with gcc-9.1.1 generates the following warning:

    CC       ui/browsers/hists.o
  ui/browsers/hists.c: In function 'perf_evsel__hists_browse':
  ui/browsers/hists.c:3078:61: error: '%d' directive output may be \
  truncated writing between 1 and 11 bytes into a region of size \
  between 2 and 12 [-Werror=format-truncation=]

   3078 |       "Max event group index to sort is %d (index from 0 to %d)",
        |                                                             ^~
  ui/browsers/hists.c:3078:7: note: directive argument in the range [-2147483648, 8]
   3078 |       "Max event group index to sort is %d (index from 0 to %d)",
        |       ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  In file included from /usr/include/stdio.h:937,
                   from ui/browsers/hists.c:5:

IOW, the string in line 3078 might be too long for buf[] of 64 bytes.

Fix this by increasing the size of buf[] to 128.

Fixes: dbddf174

  ("perf report/top TUI: Support hotkeys to let user select any event for sorting")
Signed-off-by: Song Liu <songliubraving@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: stable@vger.kernel.org # v5.7+
Link: http://lore.kernel.org/lkml/20201030235431.534417-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes from:

  dab741e0

 ("Add a "nosymfollow" mount option.")

That ends up adding support for the new MS_NOSYMFOLLOW mount flag:

  $ tools/perf/trace/beauty/mount_flags.sh > before
  $ cp include/uapi/linux/mount.h tools/include/uapi/linux/mount.h
  $ tools/perf/trace/beauty/mount_flags.sh > after
  $ diff -u before after
  --- before	2020-11-03 08:51:28.117997454 -0300
  +++ after	2020-11-03 08:51:38.992218869 -0300
  @@ -7,6 +7,7 @@
   	[32 ? (ilog2(32) + 1) : 0] = "REMOUNT",
   	[64 ? (ilog2(64) + 1) : 0] = "MANDLOCK",
   	[128 ? (ilog2(128) + 1) : 0] = "DIRSYNC",
  +	[256 ? (ilog2(256) + 1) : 0] = "NOSYMFOLLOW",
   	[1024 ? (ilog2(1024) + 1) : 0] = "NOATIME",
   	[2048 ? (ilog2(2048) + 1) : 0] = "NODIRATIME",
   	[4096 ? (ilog2(4096) + 1) : 0] = "BIND",
  $

So now one can use it in --filter expressions for tracepoints.

This silences this perf build warnings:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/mount.h' differs from latest version at 'include/uapi/linux/mount.h'
  diff -u tools/include/uapi/linux/mount.h include/uapi/linux/mount.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mattias Nissler <mnissler@chromium.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The diff is just tabs versus spaces, trivial.

This silences this perf tools build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
  diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Some should cause changes in tooling, like the one adding LAST_EXCP, but
the way it is structured end up not making that happen.

The new SVM_EXIT_INVPCID should get used by arch/x86/util/kvm-stat.c,
in the svm_exit_reasons table.

The tools/perf/trace/beauty part has scripts to catch changes and
automagically create tables, like tools/perf/trace/beauty/kvm_ioctl.sh,
but changes are needed to make tools/perf/arch/x86/util/kvm-stat.c catch
those automatically.

These were handled by the existing scripts:

  $ tools/perf/trace/beauty/kvm_ioctl.sh > before
  $ cp include/uapi/linux/kvm.h tools/include/uapi/linux/kvm.h
  $ tools/perf/trace/beauty/kvm_ioctl.sh > after
  $ diff -u before after
  --- before	2020-11-03 08:43:52.910728608 -0300
  +++ after	2020-11-03 08:44:04.273959984 -0300
  @@ -89,6 +89,7 @@
   	[0xbf] = "SET_NESTED_STATE",
   	[0xc0] = "CLEAR_DIRTY_LOG",
   	[0xc1] = "GET_SUPPORTED_HV_CPUID",
  +	[0xc6] = "X86_SET_MSR_FILTER",
   	[0xe0] = "CREATE_DEVICE",
   	[0xe1] = "SET_DEVICE_ATTR",
   	[0xe2] = "GET_DEVICE_ATTR",
  $
  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > before
  $ cp include/uapi/linux/vhost.h tools/include/uapi/linux/vhost.h
  $
  $ tools/perf/trace/beauty/vhost_virtio_ioctl.sh > after
  $ diff -u before after
  --- before	2020-11-03 08:45:55.522225198 -0300
  +++ after	2020-11-03 08:46:12.881578666 -0300
  @@ -37,4 +37,5 @@
   	[0x71] = "VDPA_GET_STATUS",
   	[0x73] = "VDPA_GET_CONFIG",
   	[0x76] = "VDPA_GET_VRING_NUM",
  +	[0x78] = "VDPA_GET_IOVA_RANGE",
   };
  $

This addresses these perf build warnings:

  Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
  diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
  Warning: Kernel ABI header at 'tools/arch/s390/include/uapi/asm/sie.h' differs from latest version at 'arch/s390/include/uapi/asm/sie.h'
  diff -u tools/arch/s390/include/uapi/asm/sie.h arch/s390/include/uapi/asm/sie.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/kvm.h' differs from latest version at 'arch/x86/include/uapi/asm/kvm.h'
  diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/svm.h' differs from latest version at 'arch/x86/include/uapi/asm/svm.h'
  diff -u tools/arch/x86/include/uapi/asm/svm.h arch/x86/include/uapi/asm/svm.h
  Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h'
  diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
  Warning: Kernel ABI header at 'tools/include/uapi/linux/vhost.h' differs from latest version at 'include/uapi/linux/vhost.h'
  diff -u tools/include/uapi/linux/vhost.h include/uapi/linux/vhost.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Yarygin <yarygin@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Cornelia Huck <cornelia.huck@de.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

  e47168f3

 ("powerpc/8xx: Support 16k hugepages with 4k pages")

That don't cause any changes in tooling, just addresses this perf build
warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/mman.h' differs from latest version at 'include/uapi/linux/mman.h'
  diff -u tools/include/uapi/linux/mman.h include/uapi/linux/mman.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick up the changes in:

  29dcc60f ("x86/boot/compressed/64: Add stage1 #VC handler")
  36e1be8a ("perf/x86/amd/ibs: Fix raw sample data accumulation")
  59a854e2 ("perf/x86/intel: Support TopDown metrics on Ice Lake")
  7b2c05a1 ("perf/x86/intel: Generic support for hardware TopDown metrics")
  99e40204 ("x86/msr: Move the F15h MSRs where they belong")
  b57de6cd ("x86/sev-es: Add SEV-ES Feature Detection")
  ed7bde7a ("cpufreq: intel_pstate: Allow enable/disable energy efficiency")
  f0f2f9fe

 ("x86/msr-index: Define an IA32_PASID MSR")

That cause these changes in tooling:

  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > before
  $ cp arch/x86/include/asm/msr-index.h tools/arch/x86/include/asm/msr-index.h
  $ tools/perf/trace/beauty/tracepoints/x86_msr.sh > after
  $ diff -u before after
  --- before	2020-10-19 13:27:33.195274425 -0300
  +++ after	2020-10-19 13:27:44.144507610 -0300
  @@ -113,6 +113,8 @@
   	[0x00000309] = "CORE_PERF_FIXED_CTR0",
   	[0x0000030a] = "CORE_PERF_FIXED_CTR1",
   	[0x0000030b] = "CORE_PERF_FIXED_CTR2",
  +	[0x0000030c] = "CORE_PERF_FIXED_CTR3",
  +	[0x00000329] = "PERF_METRICS",
   	[0x00000345] = "IA32_PERF_CAPABILITIES",
   	[0x0000038d] = "CORE_PERF_FIXED_CTR_CTRL",
   	[0x0000038e] = "CORE_PERF_GLOBAL_STATUS",
  @@ -222,6 +224,7 @@
   	[0x00000774] = "HWP_REQUEST",
   	[0x00000777] = "HWP_STATUS",
   	[0x00000d90] = "IA32_BNDCFGS",
  +	[0x00000d93] = "IA32_PASID",
   	[0x00000da0] = "IA32_XSS",
   	[0x00000dc0] = "LBR_INFO_0",
   	[0x00000ffc] = "IA32_BNDCFGS_RSVD",
  @@ -279,6 +282,7 @@
   	[0xc0010115 - x86_AMD_V_KVM_MSRs_offset] = "VM_IGNNE",
   	[0xc0010117 - x86_AMD_V_KVM_MSRs_offset] = "VM_HSAVE_PA",
   	[0xc001011f - x86_AMD_V_KVM_MSRs_offset] = "AMD64_VIRT_SPEC_CTRL",
  +	[0xc0010130 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV_ES_GHCB",
   	[0xc0010131 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_SEV",
   	[0xc0010140 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_OSVW_ID_LENGTH",
   	[0xc0010141 - x86_AMD_V_KVM_MSRs_offset] = "AMD64_OSVW_STATUS",
  $

Which causes these parts of tools/perf/ to be rebuilt:

  CC       /tmp/build/perf/trace/beauty/tracepoints/x86_msr.o
  DESCEND  plugins
  GEN      /tmp/build/perf/python/perf.so
  INSTALL  trace_plugins
  LD       /tmp/build/perf/trace/beauty/tracepoints/perf-in.o
  LD       /tmp/build/perf/trace/beauty/perf-in.o
  LD       /tmp/build/perf/perf-in.o
  LINK     /tmp/build/perf/per

At some point these should just be tables read by perf on demand.

This addresses this perf tools build warning:

  diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h'

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Kim Phillips <kim.phillips@amd.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes from:

  ecac7181

 ("x86/paravirt: Use CONFIG_PARAVIRT_XXL instead of CONFIG_PARAVIRT")

That don entail any changes in tooling, just addressing these perf tools
build warning:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/required-features.h' differs from latest version at 'arch/x86/include/asm/required-features.h'
  diff -u tools/arch/x86/include/asm/required-features.h arch/x86/include/asm/required-features.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes from:

  5866e920 ("x86/cpu: Add hardware-enforced cache coherency as a CPUID feature")
  ff4f8281 ("x86/cpufeatures: Enumerate ENQCMD and ENQCMDS instructions")
  360e7c5c ("x86/cpufeatures: Add SEV-ES CPU feature")
  18ec63fa ("x86/cpufeatures: Enumerate TSX suspend load address tracking instructions")
  e48cb1a3

 ("x86/resctrl: Enumerate per-thread MBA controls")

Which don't cause any changes in tooling, just addresses these build
warnings:

  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
  diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
  Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
  diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Cc: Kyung Min Park <kyung.min.park@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To get the changes from:

  c7f0207b

 ("fscrypt: make "#define fscrypt_policy" user-only")

That don't cause any changes in tools/perf, only addresses this perf
tools build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/fscrypt.h' differs from latest version at 'include/uapi/linux/fscrypt.h'
  diff -u tools/include/uapi/linux/fscrypt.h include/uapi/linux/fscrypt.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes in:

  13149e8b ("drm/i915: add syncobj timeline support")
  cda9edd0

 ("drm/i915: introduce a mechanism to extend execbuf2")

That don't result in any changes in tooling, just silences this perf
build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
  diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To get the changes in:

  1c101da8 ("arm64: mte: Allow user control of the tag check mode via prctl()")
  af5ce952

 ("arm64: mte: Allow user control of the generated random tags via prctl()")

Which don't cause any change in tooling, only addresses this perf build
warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/prctl.h' differs from latest version at 'include/uapi/linux/prctl.h'
  diff -u tools/include/uapi/linux/prctl.h include/uapi/linux/prctl.h

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To avoid this:

  util/scripting-engines/trace-event-python.c: In function 'python_start_script':
  util/scripting-engines/trace-event-python.c:1595:2: error: 'visibility' attribute ignored [-Werror=attributes]
   1595 |  PyMODINIT_FUNC (*initfunc)(void);
        |  ^~~~~~~~~~~~~~

That started breaking when building with PYTHON=python3 and these gcc
versions (I haven't checked with the clang ones, maybe it breaks there
as well):

  # export PERF_TARBALL=http://192.168.86.5/perf/perf-5.9.0.tar.xz
  # dm  fedora:33 fedora:rawhide
     1   107.80 fedora:33         : Ok   gcc (GCC) 10.2.1 20201005 (Red Hat 10.2.1-5), clang version 11.0.0 (Fedora 11.0.0-1.fc33)
     2    92.47 fedora:rawhide    : Ok   gcc (GCC) 10.2.1 20201016 (Red Hat 10.2.1-6), clang version 11.0.0 (Fedora 11.0.0-1.fc34)
  #

Avoid that by ditching that 'initfunc' function pointer with its:

    #define Py_EXPORTED_SYMBOL _attribute_ ((visibility ("default")))
    #define PyMODINIT_FUNC Py_EXPORTED_SYMBOL PyObject*

And just call PyImport_AppendInittab() at the end of the ifdef python3
block with the functions that were being attributed to that initfunc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The GCC specific __attribute__((optimize)) attribute does not what is
commonly expected and is explicitly recommended against using in
production code by the GCC people.

Unlike what is often expected, it doesn't add to the optimization flags,
but it fully replaces them, loosing any and all optimization flags
provided by the compiler commandline.

The only guaranteed upon means of inhibiting tail-calls is by placing a
volatile asm with side-effects after the call such that the tail-call simply
cannot be done.

Given the original commit wasn't specific on which calls were the problem, this
removal might re-introduce the problem, which can then be re-analyzed and cured
properly.

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Arvind Sankar <nivedita@alum.mit.edu>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Kees Kook <keescook@chromium.org>
Cc: Martin Liška <mliska@suse.cz>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20201028081123.GT2628@hirez.programming.kicks-ass.net
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Ian reports an issue that the metric DRAM_BW_Use often remains 0.

The metric expression for DRAM_BW_Use on CLX/SKX:

"( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time"

The counts of uncore_imc/cas_count_read/ and uncore_imc/cas_count_write/
are scaled up by 64, that is to turn a count of cache lines into bytes,
the count is then divided by 1000000000 to give GB.

However, the counts of uncore_imc/cas_count_read/ and
uncore_imc/cas_count_write/ have been scaled yet.

The scale values are from sysfs, such as
/sys/devices/uncore_imc_0/events/cas_count_read.scale.
It's 6.103515625e-5 (64 / 1024.0 / 1024.0).

So if we use original metric expression, the result is not correct.

But the difficulty is, for SKL client, the counts are not scaled.

The metric expression for DRAM_BW_Use on SKL:

"64 * ( arb@event\\=0x81\\,umask\\=0x1@ + arb@event\\=0x84\\,umask\\=0x1@ ) / 1000000 / duration_time / 1000"

root@kbl-ppc:~# perf stat -M DRAM_BW_Use -a -- sleep 1

 Performance counter stats for 'system wide':

               190      arb/event=0x84,umask=0x1/ #     1.86 DRAM_BW_Use
        29,093,178      arb/event=0x81,umask=0x1/
     1,000,703,287 ns   duration_time

       1.000703287 seconds time elapsed

The result is expected.

So the easy way is just change the metric expression for CLX/SKX.
This patch changes the metric expression to:

"( ( ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) * 1048576 ) / 1000000000 ) / duration_time"

1048576 = 1024 * 1024.

Before (tested on CLX):

root@lkp-csl-2sp5 ~# perf stat -M DRAM_BW_Use -a -- sleep 1

 Performance counter stats for 'system wide':

            765.35 MiB  uncore_imc/cas_count_read/ #     0.00 DRAM_BW_Use
              5.42 MiB  uncore_imc/cas_count_write/
        1001515088 ns   duration_time

       1.001515088 seconds time elapsed

After:

root@lkp-csl-2sp5 ~# perf stat -M DRAM_BW_Use -a -- sleep 1

 Performance counter stats for 'system wide':

            767.95 MiB  uncore_imc/cas_count_read/ #     0.80 DRAM_BW_Use
              5.02 MiB  uncore_imc/cas_count_write/
        1001900010 ns   duration_time

       1.001900010 seconds time elapsed

Fixes: 038d3b53 ("perf vendor events intel: Update CascadelakeX events to v1.08")
Fixes: b5ff7f27

 ("perf vendor events: Update SkylakeX events to v1.21")
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20201023005334.7869-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

  # ./perf trace -e sched:sched_switch -G test -a sleep 1
  perf: Segmentation fault
  Obtained 11 stack frames.
  ./perf(sighandler_dump_stack+0x43) [0x55cfdc636db3]
  /lib/x86_64-linux-gnu/libc.so.6(+0x3efcf) [0x7fd23eecafcf]
  ./perf(parse_cgroups+0x36) [0x55cfdc673f36]
  ./perf(+0x3186ed) [0x55cfdc70d6ed]
  ./perf(parse_options_subcommand+0x629) [0x55cfdc70e999]
  ./perf(cmd_trace+0x9c2) [0x55cfdc5ad6d2]
  ./perf(+0x1e8ae0) [0x55cfdc5ddae0]
  ./perf(+0x1e8ded) [0x55cfdc5ddded]
  ./perf(main+0x370) [0x55cfdc556f00]
  /lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xe6) [0x7fd23eeadb96]
  ./perf(_start+0x29) [0x55cfdc557389]
  Segmentation fault
  #

 It happens because "struct trace" in option->value is passed to the
 parse_cgroups function instead of "struct evlist".

Fixes: 9ea42ba4

 ("perf trace: Support setting cgroups as targets")
Signed-off-by: Stanislav Ivanichkin <sivanichkin@yandex-team.ru>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Dmitry Monakhov <dmtrmonakhov@yandex-team.ru>
Link: http://lore.kernel.org/lkml/20201027094357.94881-1-sivanichkin@yandex-team.ru
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

The addr in PERF_RECORD_KSYMBOL events for non-jited bpf progs points to
the bpf interpreter, ie. within kernel text section. When processing the
unregister event, this causes unexpected removal of vmlinux_map,
crashing perf later in cleanup:

  # perf record -- timeout --signal=INT 2s /usr/share/bcc/tools/execsnoop
  PCOMM            PID    PPID   RET ARGS
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.208 MB perf.data (5155 samples) ]
  perf: tools/include/linux/refcount.h:131: refcount_sub_and_test: Assertion `!(new > val)' failed.
  Aborted (core dumped)

  # perf script -D|grep KSYM
  0 0xa40 [0x48]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_f958f6eb72ef5af6
  0 0xab0 [0x48]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_8c42dee26e8cd4c2
  0 0xb20 [0x48]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b530 len 0 type 1 flags 0x0 name bpf_prog_f958f6eb72ef5af6
  108563691893 0x33d98 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3b0 len 0 type 1 flags 0x0 name bpf_prog_bc5697a410556fc2_syscall__execve
  108568518458 0x34098 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3f0 len 0 type 1 flags 0x0 name bpf_prog_45e2203c2928704d_do_ret_sys_execve
  109301967895 0x34830 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3b0 len 0 type 1 flags 0x1 name bpf_prog_bc5697a410556fc2_syscall__execve
  109302007356 0x348b0 [0x58]: PERF_RECORD_KSYMBOL addr ffffffffa9b6b3f0 len 0 type 1 flags 0x1 name bpf_prog_45e2203c2928704d_do_ret_sys_execve
  perf: tools/include/linux/refcount.h:131: refcount_sub_and_test: Assertion `!(new > val)' failed.

Here the addresses match the bpf interpreter:

  # grep -e ffffffffa9b6b530 -e ffffffffa9b6b3b0 -e ffffffffa9b6b3f0 /proc/kallsyms
  ffffffffa9b6b3b0 t __bpf_prog_run224
  ffffffffa9b6b3f0 t __bpf_prog_run192
  ffffffffa9b6b530 t __bpf_prog_run32

Fix by not allowing vmlinux_map to be removed by PERF_RECORD_KSYMBOL
unregister event.

Signed-off-by: Tommi Rantala <tommi.t.rantala@nokia.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201016114718.54332-1-tommi.t.rantala@nokia.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes from:

  ecb8ac8b

 ("mm/madvise: introduce process_madvise() syscall: an external memory hinting API")

That addresses these perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
  diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
  Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
  diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

To pick the changes in:

  85367030 ("libbpf: Centralize poisoning and poison reallocarray()")
  7d9c71e1

 ("libbpf: Extract generic string hashing function for reuse")

That don't entail any changes in tools/perf.

This addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h'
  diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h

Not a kernel ABI, its just that this uses the mechanism in place for
checking kernel ABI files drift.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andriin@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>