- Dec 08, 2022
-
-
Björn Töpel authored
commit 6fdd5d2f upstream. 64-bit RISC-V kernels have the kernel image mapped separately to alias the linear map. The linear map and the kernel image map are documented as "direct mapping" and "kernel" respectively in [1]. At image load time, the linear map corresponding to the kernel image is set to PAGE_READ permission, and the kernel image map is set to PAGE_READ|PAGE_EXEC. When the initmem is freed, the pages in the linear map should be restored to PAGE_READ|PAGE_WRITE, whereas the corresponding pages in the kernel image map should be restored to PAGE_READ, by removing the PAGE_EXEC permission. This is not the case. For 64-bit kernels, only the linear map is restored to its proper page permissions at initmem free, and not the kernel image map. In practise this results in that the kernel can potentially jump to dead __init code, and start executing invalid instructions, without getting an exception. Restore the freed initmem properly, by setting both the kernel image map to the correct permissions. [1] Documentation/riscv/vm-layout.rst Fixes: e5c35fa0 ("riscv: Map the kernel with correct permissions the first time") Signed-off-by:
Björn Töpel <bjorn@rivosinc.com> Reviewed-by:
Alexandre Ghiti <alex@ghiti.fr> Tested-by:
Alexandre Ghiti <alex@ghiti.fr> Link: https://lore.kernel.org/r/20221115090641.258476-1-bjorn@kernel.org Cc: stable@vger.kernel.org Signed-off-by:
Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jisheng Zhang authored
commit 74f6bb55 upstream. lkp reported a build error, I tried the config and can reproduce build error as below: VDSOLD arch/riscv/kernel/vdso/vdso.so.dbg ld.lld: error: section .note file range overlaps with .text >>> .note range is [0x7C8, 0x803] >>> .text range is [0x800, 0x1993] ld.lld: error: section .text file range overlaps with .dynamic >>> .text range is [0x800, 0x1993] >>> .dynamic range is [0x808, 0x937] ld.lld: error: section .note virtual address range overlaps with .text >>> .note range is [0x7C8, 0x803] >>> .text range is [0x800, 0x1993] Fix it by setting DISABLE_BRANCH_PROFILING which will disable branch tracing for vdso, thus avoid useless _ftrace_annotated_branch section and _ftrace_branch section. Although we can also fix it by removing the hardcoded .text begin address, but I think that's another story and should be put into another patch. Link: https://lore.kernel.org/lkml/202210122123.Cc4FPShJ-lkp@intel.com/#r Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Jisheng Zhang <jszhang@kernel.org> Link: https://lore.kernel.org/r/20221102170254.1925-1-jszhang@kernel.org Fixes: ad5d1122 ("riscv: use vDSO common flow to reduce the latency of the time-related functions") Cc: stable@vger.kernel.org Signed-off-by:
Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yuan Can authored
[ Upstream commit 9bdc112b ] As the devm_kcalloc may return NULL, the return value needs to be checked to avoid NULL poineter dereference. Fixes: d0ddfd24 ("hwmon: (asus-ec-sensors) add driver for ASUS EC") Signed-off-by:
Yuan Can <yuancan@huawei.com> Link: https://lore.kernel.org/r/20221125014329.121560-1-yuancan@huawei.com Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yang Yingliang authored
[ Upstream commit 7dec1453 ] As comment of pci_get_domain_bus_and_slot() says, it returns a pci device with refcount increment, when finish using it, the caller must decrement the reference count by calling pci_dev_put(). So call it after using to avoid refcount leak. Fixes: 14513ee6 ("hwmon: (coretemp) Use PCI host bridge ID to identify CPU if necessary") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221118093303.214163-1-yangyingliang@huawei.com Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Phil Auld authored
[ Upstream commit a89ff5f5 ] If coretemp_add_core() gets an error then pdata->core_data[indx] is already NULL and has been kfreed. Don't pass that to sysfs_remove_group() as that will crash in sysfs_remove_group(). [Shortened for readability] [91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label' <cpu offline> [91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188 [91855.165103] #PF: supervisor read access in kernel mode [91855.194506] #PF: error_code(0x0000) - not-present page [91855.224445] PGD 0 P4D 0 [91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI ... [91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80 ... [91855.796571] Call Trace: [91855.810524] coretemp_cpu_offline+0x12b/0x1dd [coretemp] [91855.841738] ? coretemp_cpu_online+0x180/0x180 [coretemp] [91855.871107] cpuhp_invoke_callback+0x105/0x4b0 [91855.893432] cpuhp_thread_fun+0x8e/0x150 ... Fix this by checking for NULL first. Signed-off-by:
Phil Auld <pauld@redhat.com> Cc: linux-hwmon@vger.kernel.org Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Jean Delvare <jdelvare@suse.com> Cc: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20221117162313.3164803-1-pauld@redhat.com Fixes: 199e0de7 ("hwmon: (coretemp) Merge pkgtemp with coretemp") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marc Dionne authored
[ Upstream commit ef4d3ea4 ] The atomic_read was accidentally replaced with atomic_inc_return, which prevents the server from getting cleaned up and causes rmmod to hang with a warning: Can't purge s=00000001 Fixes: 2757a4dc ("afs: Fix access after dec in put functions") Signed-off-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20221130174053.2665818-1-marc.dionne@auristor.com/ Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yoshihiro Shimoda authored
[ Upstream commit d66233a3 ] After system resumed on some environment board, the promiscuous mode is disabled because the SoC turned off. So, call ravb_set_rx_mode() in the ravb_resume() to fix the issue. Reported-by:
Tho Vu <tho.vu.wh@renesas.com> Fixes: 0184165b ("ravb: add sleep PM suspend/resume support") Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Link: https://lore.kernel.org/r/20221128065604.1864391-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zhengchao Shao authored
[ Upstream commit 9ed7bfc7 ] When sctp_stream_outq_migrate() is called to release stream out resources, the memory pointed to by prio_head in stream out is not released. The memory leak information is as follows: unreferenced object 0xffff88801fe79f80 (size 64): comm "sctp_repo", pid 7957, jiffies 4294951704 (age 36.480s) hex dump (first 32 bytes): 80 9f e7 1f 80 88 ff ff 80 9f e7 1f 80 88 ff ff ................ 90 9f e7 1f 80 88 ff ff 90 9f e7 1f 80 88 ff ff ................ backtrace: [<ffffffff81b215c6>] kmalloc_trace+0x26/0x60 [<ffffffff88ae517c>] sctp_sched_prio_set+0x4cc/0x770 [<ffffffff88ad64f2>] sctp_stream_init_ext+0xd2/0x1b0 [<ffffffff88aa2604>] sctp_sendmsg_to_asoc+0x1614/0x1a30 [<ffffffff88ab7ff1>] sctp_sendmsg+0xda1/0x1ef0 [<ffffffff87f765ed>] inet_sendmsg+0x9d/0xe0 [<ffffffff8754b5b3>] sock_sendmsg+0xd3/0x120 [<ffffffff8755446a>] __sys_sendto+0x23a/0x340 [<ffffffff87554651>] __x64_sys_sendto+0xe1/0x1b0 [<ffffffff89978b49>] do_syscall_64+0x39/0xb0 [<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd Link: https://syzkaller.appspot.com/bug?exrid=29c402e56c4760763cc0 Fixes: 637784ad ("sctp: introduce priority based stream scheduler") Reported-by:
<syzbot+29c402e56c4760763cc0@syzkaller.appspotmail.com> Signed-off-by:
Zhengchao Shao <shaozhengchao@huawei.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/20221126031720.378562-1-shaozhengchao@huawei.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Willem de Bruijn authored
[ Upstream commit b85f628a ] CHECKSUM_COMPLETE signals that skb->csum stores the sum over the entire packet. It does not imply that an embedded l4 checksum field has been validated. Fixes: 682f048b ("af_packet: pass checksum validation status to the user") Signed-off-by:
Willem de Bruijn <willemb@google.com> Link: https://lore.kernel.org/r/20221128161812.640098-1-willemdebruijn.kernel@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chris Mi authored
[ Upstream commit 0e682f04 ] The cited commit adds a for loop to check if each port supports lag or not. But dev is not initialized correctly. Fix it by initializing dev for each iteration. Fixes: e87c6a83 ("net/mlx5: E-switch, Fix duplicate lag creation") Signed-off-by:
Chris Mi <cmi@nvidia.com> Reported-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Link: https://lore.kernel.org/r/20221129093006.378840-2-saeed@kernel.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Shigeru Yoshida authored
[ Upstream commit 5daadc86 ] syzbot reported use-after-free in tun_detach() [1]. This causes call trace like below: ================================================================== BUG: KASAN: use-after-free in notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75 Read of size 8 at addr ffff88807324e2a8 by task syz-executor.0/3673 CPU: 0 PID: 3673 Comm: syz-executor.0 Not tainted 6.1.0-rc5-syzkaller-00044-gcc675d22e422 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x15e/0x461 mm/kasan/report.c:395 kasan_report+0xbf/0x1f0 mm/kasan/report.c:495 notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75 call_netdevice_notifiers_info+0x86/0x130 net/core/dev.c:1942 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] netdev_wait_allrefs_any net/core/dev.c:10237 [inline] netdev_run_todo+0xbc6/0x1100 net/core/dev.c:10351 tun_detach drivers/net/tun.c:704 [inline] tun_chr_close+0xe4/0x190 drivers/net/tun.c:3467 __fput+0x27c/0xa90 fs/file_table.c:320 task_work_run+0x16f/0x270 kernel/task_work.c:179 exit_task_work include/linux/task_work.h:38 [inline] do_exit+0xb3d/0x2a30 kernel/exit.c:820 do_group_exit+0xd4/0x2a0 kernel/exit.c:950 get_signal+0x21b1/0x2440 kernel/signal.c:2858 arch_do_signal_or_restart+0x86/0x2300 arch/x86/kernel/signal.c:869 exit_to_user_mode_loop kernel/entry/common.c:168 [inline] exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296 do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd The cause of the issue is that sock_put() from __tun_detach() drops last reference count for struct net, and then notifier_call_chain() from netdev_state_change() accesses that struct net. This patch fixes the issue by calling sock_put() from tun_detach() after all necessary accesses for the struct net has done. Fixes: 83c1f36f ("tun: send netlink notification when the device is modified") Reported-by:
<syzbot+106f9b687cd64ee70cd1@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?id=96eb7f1ce75ef933697f24eeab928c4a716edefe [1] Signed-off-by:
Shigeru Yoshida <syoshida@redhat.com> Link: https://lore.kernel.org/r/20221124175134.1589053-1-syoshida@redhat.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
David Howells authored
[ Upstream commit ca57f022 ] The fileserver probing code attempts to work out the best fileserver to use for a volume by retrieving the RTT calculated by AF_RXRPC for the probe call sent to each server and comparing them. Sometimes, however, no RTT estimate is available and rxrpc_kernel_get_srtt() returns false, leading good fileservers to be given an RTT of UINT_MAX and thus causing the rotation algorithm to ignore them. Fix afs_select_fileserver() to ignore rxrpc_kernel_get_srtt()'s return value and just take the estimated RTT it provides - which will be capped at 1 second. Fixes: 1d4adfaf ("rxrpc: Make rxrpc_kernel_get_srtt() indicate validity") Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Tested-by:
Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Link: https://lore.kernel.org/r/166965503999.3392585.13954054113218099395.stgit@warthog.procyon.org.uk/ Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yang Yingliang authored
[ Upstream commit cdde1560 ] I got the following report while doing device(mscc-miim) load test with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled: OF: ERROR: memory leak, expected refcount 1 instead of 2, of_node_get()/of_node_put() unbalanced - destroy cset entry: attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0 If the 'fwnode' is not an acpi node, the refcount is get in fwnode_mdiobus_phy_device_register(), but it has never been put when the device is freed in the normal path. So call fwnode_handle_put() in phy_device_release() to avoid leak. If it's an acpi node, it has never been get, but it's put in the error path, so call fwnode_handle_get() before phy_device_register() to keep get/put operation balanced. Fixes: bc1bee3b ("net: mdiobus: Introduce fwnode_mdiobus_register_phy()") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20221124150130.609420-1-yangyingliang@huawei.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
YueHaibing authored
[ Upstream commit 7e177d32 ] The skb is delivered to netif_rx() which may free it, after calling this, dereferencing skb may trigger use-after-free. Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20221125075724.27912-1-yuehaibing@huawei.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Xin Long authored
[ Upstream commit 3067bc61 ] As the call trace shows, the original skb was freed in tipc_msg_validate(), and dereferencing the old skb cb would cause an use-after-free crash. BUG: KASAN: use-after-free in tipc_crypto_rcv_complete+0x1835/0x2240 [tipc] Call Trace: <IRQ> tipc_crypto_rcv_complete+0x1835/0x2240 [tipc] tipc_crypto_rcv+0xd32/0x1ec0 [tipc] tipc_rcv+0x744/0x1150 [tipc] ... Allocated by task 47078: kmem_cache_alloc_node+0x158/0x4d0 __alloc_skb+0x1c1/0x270 tipc_buf_acquire+0x1e/0xe0 [tipc] tipc_msg_create+0x33/0x1c0 [tipc] tipc_link_build_proto_msg+0x38a/0x2100 [tipc] tipc_link_timeout+0x8b8/0xef0 [tipc] tipc_node_timeout+0x2a1/0x960 [tipc] call_timer_fn+0x2d/0x1c0 ... Freed by task 47078: tipc_msg_validate+0x7b/0x440 [tipc] tipc_crypto_rcv_complete+0x4b5/0x2240 [tipc] tipc_crypto_rcv+0xd32/0x1ec0 [tipc] tipc_rcv+0x744/0x1150 [tipc] This patch fixes it by re-fetching the skb cb from the new allocated skb after calling tipc_msg_validate(). Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication") Reported-by:
Shuang Li <shuali@redhat.com> Signed-off-by:
Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/1b1cdba762915325bd8ef9a98d0276eb673df2a5.1669398403.git.lucien.xin@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Paolo Abeni authored
[ Upstream commit b4f16665 ] Matt reported a splat at msk close time: BUG: sleeping function called from invalid context at net/mptcp/protocol.c:2877 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 155, name: packetdrill preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 4 locks held by packetdrill/155: #0: ffff888001536990 (&sb->s_type->i_mutex_key#6){+.+.}-{3:3}, at: __sock_release (net/socket.c:650) #1: ffff88800b498130 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close (net/mptcp/protocol.c:2973) #2: ffff88800b49a130 (sk_lock-AF_INET/1){+.+.}-{0:0}, at: __mptcp_close_ssk (net/mptcp/protocol.c:2363) #3: ffff88800b49a0b0 (slock-AF_INET){+...}-{2:2}, at: __lock_sock_fast (include/net/sock.h:1820) Preemption disabled at: 0x0 CPU: 1 PID: 155 Comm: packetdrill Not tainted 6.1.0-rc5 #365 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) __might_resched.cold (kernel/sched/core.c:9891) __mptcp_destroy_sock (include/linux/kernel.h:110) __mptcp_close (net/mptcp/protocol.c:2959) mptcp_subflow_queue_clean (include/net/sock.h:1777) __mptcp_close_ssk (net/mptcp/protocol.c:2363) mptcp_destroy_common (net/mptcp/protocol.c:3170) mptcp_destroy (include/net/sock.h:1495) __mptcp_destroy_sock (net/mptcp/protocol.c:2886) __mptcp_close (net/mptcp/protocol.c:2959) mptcp_close (net/mptcp/protocol.c:2974) inet_release (net/ipv4/af_inet.c:432) __sock_release (net/socket.c:651) sock_close (net/socket.c:1367) __fput (fs/file_table.c:320) task_work_run (kernel/task_work.c:181 (discriminator 1)) exit_to_user_mode_prepare (include/linux/resume_user_mode.h:49) syscall_exit_to_user_mode (kernel/entry/common.c:130) do_syscall_64 (arch/x86/entry/common.c:87) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) We can't call mptcp_close under the 'fast' socket lock variant, replace it with a sock_lock_nested() as the relevant code is already under the listening msk socket lock protection. Reported-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/316 Fixes: 30e51b92 ("mptcp: fix unreleased socket in accept queue") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Menglong Dong authored
[ Upstream commit fe948001 ] All of the subflows of a msk will be orphaned in mptcp_close(), which means the subflows are in DEAD state. After then, DATA_FIN will be sent, and the other side will response with a DATA_ACK for this DATA_FIN. However, if the other side still has pending data, the data that received on these subflows will not be passed to the msk, as they are DEAD and subflow_data_ready() will not be called in tcp_data_ready(). Therefore, these data can't be acked, and they will be retransmitted again and again, until timeout. Fix this by setting ssk->sk_socket and ssk->sk_wq to 'NULL', instead of orphaning the subflows in __mptcp_close(), as Paolo suggested. Fixes: e16163b6 ("mptcp: refactor shutdown and close") Reviewed-by:
Biao Jiang <benbjiang@tencent.com> Reviewed-by:
Mengen Sun <mengensun@tencent.com> Signed-off-by:
Menglong Dong <imagedong@tencent.com> Reviewed-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jerry Ray authored
[ Upstream commit 39f59bca ] This patch changes the reported ethtool statistics for the lan9303 family of parts covered by this driver. The TxUnderRun statistic label is renamed to RxShort to accurately reflect what stat the device is reporting. I did not reorder the statistics as that might cause problems with existing user code that are expecting the stats at a certain offset. Fixes: a1292595 ("net: dsa: add new DSA switch driver for the SMSC-LAN9303") Signed-off-by:
Jerry Ray <jerry.ray@microchip.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221128193559.6572-1-jerry.ray@microchip.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
M Chetan Kumar authored
[ Upstream commit c34ca4f3 ] skb passed to network layer contains incorrect length. In mux aggregation protocol, the datagram block received from device contains block signature, packet & datagram header. The right skb len to be calculated by subracting datagram pad len from datagram length. Whereas in mux lite protocol, the skb contains single datagram so skb len is calculated by subtracting the packet offset from datagram header. Fixes: 1f52d7b6 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
M Chetan Kumar authored
[ Upstream commit 2290a1d4 ] Peek throughput UL test is resulting in crash. If the UL transfer block free list is exhaust, the peeked skb is freed. In the next transfer freed skb is referred from UL list which results in crash. Don't free the skb if UL transfer blocks are unavailable. The pending skb will be picked for transfer on UL transfer block available. Fixes: 1f52d7b6 ("net: wwan: iosm: Enable M.2 7360 WWAN card support") Signed-off-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
M Chetan Kumar authored
[ Upstream commit 4a99e3c8 ] Fix build error reported on armhf while preparing 6.1-rc5 for Debian. iosm_ipc_protocol.c:244:36: error: passing argument 3 of 'dma_alloc_coherent' from incompatible pointer type. Change phy_ap_shm type from phys_addr_t to dma_addr_t. Fixes: faed4c6f ("net: iosm: shared memory protocol") Reported-by:
Bonaccorso Salvatore <carnil@debian.org> Signed-off-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
M Chetan Kumar authored
[ Upstream commit 985a02e7 ] sparse warnings - iosm_ipc_mux_codec.c:1474 using plain integer as NULL pointer. Use skb_trim() to reset skb tail & len. Fixes: 9413491e ("net: iosm: encode or decode datagram") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
M Chetan Kumar <m.chetan.kumar@linux.intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yuri Karpov authored
[ Upstream commit 9256db4e ] In function nixge_hw_dma_bd_release() dereference of NULL pointer priv->rx_bd_v is possible for the case of its allocation failure in nixge_hw_dma_bd_init(). Move for() loop with priv->rx_bd_v dereference under the check for its validity. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 492caffa ("net: ethernet: nixge: Add support for National Instruments XGE netdev") Signed-off-by:
Yuri Karpov <YKarpov@ispras.ru> Reviewed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Wang Hai authored
[ Upstream commit dcc14cfd ] Both p9_fd_create_tcp() and p9_fd_create_unix() will call p9_socket_open(). If the creation of p9_trans_fd fails, p9_fd_create_tcp() and p9_fd_create_unix() will return an error directly instead of releasing the cscoket, which will result in a socket leak. This patch adds sock_release() to fix the leak issue. Fixes: 6b18662e ("9p connect fixes") Signed-off-by:
Wang Hai <wanghai38@huawei.com> ACKed-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yuan Can authored
[ Upstream commit b8f79dcc ] The ntb_netdev_init_module() returns the ntb_transport_register_client() directly without checking its return value, if ntb_transport_register_client() failed, the NTB client device is not unregistered. Fix by unregister NTB client device when ntb_transport_register_client() failed. Fixes: 548c237c ("net: Add support for NTB virtual ethernet device") Signed-off-by:
Yuan Can <yuancan@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zhang Changzhong authored
[ Upstream commit 46fb6512 ] The am65_cpsw_nuss_cleanup_ndev() function calls unregister_netdev() even if register_netdev() fails, which triggers WARN_ON(1) in unregister_netdevice_many(). To fix it, make sure that unregister_netdev() is called only on registered netdev. Compile tested only. Fixes: 84b4aa49 ("net: ethernet: ti: am65-cpsw: add multi port support in mac-only mode") Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yang Yingliang authored
[ Upstream commit 369eb2c9 ] I got a null-ptr-deref report as following when doing fault injection test: BUG: kernel NULL pointer dereference, address: 0000000000000058 Oops: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 1 PID: 253 Comm: 507-spi-dm9051 Tainted: G B N 6.1.0-rc3+ Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 RIP: 0010:klist_put+0x2d/0xd0 Call Trace: <TASK> klist_remove+0xf1/0x1c0 device_release_driver_internal+0x23e/0x2d0 bus_remove_device+0x1bd/0x240 device_del+0x357/0x770 phy_device_remove+0x11/0x30 mdiobus_unregister+0xa5/0x140 release_nodes+0x6a/0xa0 devres_release_all+0xf8/0x150 device_unbind_cleanup+0x19/0xd0 //probe path: phy_device_register() device_add() phy_connect phy_attach_direct() //set device driver probe() //it's failed, driver is not bound device_bind_driver() // probe failed, it's not called //remove path: phy_device_remove() device_del() device_release_driver_internal() __device_release_driver() //dev->drv is not NULL klist_remove() <- knode_driver is not added yet, cause null-ptr-deref In phy_attach_direct(), after setting the 'dev->driver', probe() fails, device_bind_driver() is not called, so the knode_driver->n_klist is not set, then it causes null-ptr-deref in __device_release_driver() while deleting device. Fix this by setting dev->driver to NULL in the error path in phy_attach_direct(). Fixes: e1393456 ("[PATCH] PHY Layer fixup") Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lorenzo Bianconi authored
[ Upstream commit 3e8f7abc ] Fix possible out-of-bound access in ieee80211_get_rate_duration routine as reported by the following UBSAN report: UBSAN: array-index-out-of-bounds in net/mac80211/airtime.c:455:47 index 15 is out of range for type 'u16 [12]' CPU: 2 PID: 217 Comm: kworker/u32:10 Not tainted 6.1.0-060100rc3-generic Hardware name: Acer Aspire TC-281/Aspire TC-281, BIOS R01-A2 07/18/2017 Workqueue: mt76 mt76u_tx_status_data [mt76_usb] Call Trace: <TASK> show_stack+0x4e/0x61 dump_stack_lvl+0x4a/0x6f dump_stack+0x10/0x18 ubsan_epilogue+0x9/0x43 __ubsan_handle_out_of_bounds.cold+0x42/0x47 ieee80211_get_rate_duration.constprop.0+0x22f/0x2a0 [mac80211] ? ieee80211_tx_status_ext+0x32e/0x640 [mac80211] ieee80211_calc_rx_airtime+0xda/0x120 [mac80211] ieee80211_calc_tx_airtime+0xb4/0x100 [mac80211] mt76x02_send_tx_status+0x266/0x480 [mt76x02_lib] mt76x02_tx_status_data+0x52/0x80 [mt76x02_lib] mt76u_tx_status_data+0x67/0xd0 [mt76_usb] process_one_work+0x225/0x400 worker_thread+0x50/0x3e0 ? process_one_work+0x400/0x400 kthread+0xe9/0x110 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x22/0x30 Fixes: db3e1c40 ("mac80211: Import airtime calculation code from mt76") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Acked-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Johannes Berg authored
[ Upstream commit acd3c92a ] In S1G beacon frames there shouldn't be multi-BSSID elements since that's not supported, remove that to avoid a potential integer underflow and/or misparsing the frames due to the different length of the fixed part of the frame. While at it, initialize non_tx_data so we don't send garbage values to the user (even if it doesn't seem to matter now.) Reported-and-tested-by:
Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 9eaffe50 ("cfg80211: convert S1G beacon to scan results") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Johannes Berg authored
[ Upstream commit 9f16b5c8 ] For vendor elements, the code here assumes that 5 octets are present without checking. Since the element itself is already checked to fit, we only need to check the length. Reported-and-tested-by:
Sönke Huster <shuster@seemoo.tu-darmstadt.de> Fixes: 0b8fb823 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Izabela Bakollari authored
[ Upstream commit 2a838911 ] IPV6 addresses are purged when setting the number of rx/tx rings using ethtool -G. The function aq_set_ringparam calls dev_close, which removes the addresses. As a solution, call an internal function (aq_ndev_close). Fixes: c1af5427 ("net: aquantia: Ethtool based ring size configuration") Signed-off-by:
Izabela Bakollari <ibakolla@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Duoming Zhou authored
[ Upstream commit 8dbd6e4c ] The watchdog timer is used to monitor whether the process of transmitting data is timeout. If we use qlcnic driver, the dev_watchdog() that is the timer handler of watchdog timer will call qlcnic_tx_timeout() to process the timeout. But the qlcnic_tx_timeout() calls msleep(), as a result, the sleep-in-atomic-context bugs will happen. The processes are shown below: (atomic context) dev_watchdog qlcnic_tx_timeout qlcnic_83xx_idc_request_reset qlcnic_83xx_lock_driver msleep --------------------------- (atomic context) dev_watchdog qlcnic_tx_timeout qlcnic_83xx_idc_request_reset qlcnic_83xx_lock_driver qlcnic_83xx_recover_driver_lock msleep Fix by changing msleep() to mdelay(), the mdelay() is busy-waiting and the bugs could be mitigated. Fixes: 629263ac ("qlcnic: 83xx CNA inter driver communication mechanism") Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Amir Goldstein authored
[ Upstream commit 10bc8e4a ] Commit 868f9f2f ("vfs: fix copy_file_range() regression in cross-fs copies") removed fallback to generic_copy_file_range() for cross-fs cases inside vfs_copy_file_range(). To preserve behavior of nfsd and ksmbd server-side-copy, the fallback to generic_copy_file_range() was added in nfsd and ksmbd code, but that call is missing sb_start_write(), fsnotify hooks and more. Ideally, nfsd and ksmbd would pass a flag to vfs_copy_file_range() that will take care of the fallback, but that code would be subtle and we got vfs_copy_file_range() logic wrong too many times already. Instead, add a flag to explicitly request vfs_copy_file_range() to perform only generic_copy_file_range() and let nfsd and ksmbd use this flag only in the fallback path. This choise keeps the logic changes to minimum in the non-nfsd/ksmbd code paths to reduce the risk of further regressions. Fixes: 868f9f2f ("vfs: fix copy_file_range() regression in cross-fs copies") Tested-by:
Namjae Jeon <linkinjeon@kernel.org> Tested-by:
Luis Henriques <lhenriques@suse.de> Signed-off-by:
Amir Goldstein <amir73il@gmail.com> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
蒋家盛 authored
[ Upstream commit 68b4f9e0 ] Since the devm_clk_get may return error, it should be better to add check for the cdev->hclk, as same as cdev->cclk. Fixes: f524f829 ("can: m_can: Create a m_can platform framework") Signed-off-by:
Jiasheng Jiang <jiasheng@iscas.ac.cn> Link: https://lore.kernel.org/all/20221123063651.26199-1-jiasheng@iscas.ac.cn Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zhang Changzhong authored
[ Upstream commit 1eca1d4c ] In m_can_pci_remove() and error handling path of m_can_pci_probe(), m_can_class_free_dev() should be called to free resource allocated by m_can_class_allocate_dev(), otherwise there will be memleak. Fixes: cab7ffc0 ("can: m_can: add PCI glue driver for Intel Elkhart Lake") Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Reviewed-by:
Jarkko Nikula <jarkko.nikula@linux.intel.com> Link: https://lore.kernel.org/all/1668168684-6390-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zhang Changzhong authored
[ Upstream commit 709cb2f9 ] In case of register_candev() fails, clear es58x_dev->netdev[channel_idx] and add free_candev(). Otherwise es58x_free_netdevs() will unregister the netdev that has never been registered. Fixes: 85372578 ("can: etas_es58x: add core support for ETAS ES58X CAN USB interfaces") Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by:
Arunachalam Santhanam <Arunachalam.Santhanam@in.bosch.com> Acked-by:
Vincent Mailhol <mailhol.vincent@wanadoo.fr> Link: https://lore.kernel.org/all/1668413685-23354-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zhang Changzhong authored
[ Upstream commit 62ec89e7 ] Add the missing free_cc770dev() before return from cc770_isa_probe() in the register_cc770dev() error handling case. In addition, remove blanks before goto labels. Fixes: 7e02e543 ("can: cc770: legacy CC770 ISA bus driver") Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/all/1668168557-6024-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zhang Changzhong authored
[ Upstream commit 92dfd931 ] Add the missing free_sja1000dev() before return from sja1000_isa_probe() in the register_sja1000dev() error handling case. In addition, remove blanks before goto labels. Fixes: 2a6ba39a ("can: sja1000: legacy SJA1000 ISA bus driver") Signed-off-by:
Zhang Changzhong <zhangchangzhong@huawei.com> Link: https://lore.kernel.org/all/1668168521-5540-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Roi Dayan authored
[ Upstream commit 52c795af ] When having multiple dests with termination tables and second one or afterwards fails the driver reverts usage of term tables but doesn't reset the assignment in attr->dests[num_vport_dests].termtbl which case a use-after-free when releasing the rule. Fix by resetting the assignment of termtbl to null. Fixes: 10caabda ("net/mlx5e: Use termination table for VLAN push actions") Signed-off-by:
Roi Dayan <roid@nvidia.com> Reviewed-by:
Maor Dickman <maord@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
YueHaibing authored
[ Upstream commit 3f5769a0 ] If sscanf() return 0, outlen is uninitialized and used in kzalloc(), this is unexpected. We should return -EINVAL if the string is invalid. Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-