commit 17a82716 upstream.

In previous patches that added support for new iowarrior devices, the
handling of the report size was not done correct.

Fix that up and update the copyright date for the driver

Reworked from an original patch written by Christoph Jung.

Fixes: bab5417f ("USB: misc: iowarrior: add support for the 100 device")
Fixes: 5f6f8da2 ("USB: misc: iowarrior: add support for the 28 and 28L devices")
Fixes: 461d8deb

 ("USB: misc: iowarrior: add support for 2 OEMed devices")
Cc: stable <stable@kernel.org>
Reported-by: Christoph Jung <jung@codemercs.com>
Link: https://lore.kernel.org/r/20200726094939.1268978-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d2a4309c

 upstream.

When running qmi-firmware-update on the Sierra Wireless EM7305 in a Toshiba
laptop, it changed product ID to 0x9062 when entering QDL mode:

usb 2-4: new high-speed USB device number 78 using xhci_hcd
usb 2-4: New USB device found, idVendor=1199, idProduct=9062, bcdDevice= 0.00
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: EM7305
usb 2-4: Manufacturer: Sierra Wireless, Incorporated

The upgrade could complete after running
 # echo 1199 9062 > /sys/bus/usb-serial/drivers/qcserial/new_id

qcserial 2-4:1.0: Qualcomm USB modem converter detected
usb 2-4: Qualcomm USB modem converter now attached to ttyUSB0

Signed-off-by: Erik Ekman <erik@kryo.se>
Link: https://lore.kernel.org/r/20200717185118.3640219-1-erik@kryo.se
Cc: stable@vger.kernel.org
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch is used to fix ext4 direct I/O read error when
the read size is not aligned with block size.

Then, I will use a test to explain the error.

(1) Make a file that is not aligned with block size:
	$dd if=/dev/zero of=./test.jar bs=1000 count=3

(2) I wrote a source file named "direct_io_read_file.c" as following:

	#include <stdio.h>
	#include <stdlib.h>
	#include <unistd.h>
	#include <sys/file.h>
	#include <sys/types.h>
	#include <sys/stat.h>
	#include <string.h>
	#define BUF_SIZE 1024

	int main()
	{
		int fd;
		int ret;

		unsigned char *buf;
		ret = posix_memalign((void **)&buf, 512, BUF_SIZE);
		if (ret) {
			perror("posix_memalign failed");
			exit(1);
		}
		fd = open("./test.jar", O_RDONLY | O_DIRECT, 0755);
		if (fd < 0){
			perror("open ./test.jar failed");
			exit(1);
		}

		do {
			ret = read(fd, buf, BUF_SIZE);
			printf("ret=%d\n",ret);
			if (ret < 0) {
				perror("write test.jar failed");
			}
		} while (ret > 0);

		free(buf);
		close(fd);
	}

(3) Compile the source file:
	$gcc direct_io_read_file.c -D_GNU_SOURCE

(4) Run the test program:
	$./a.out

	The result is as following:
	ret=1024
	ret=1024
	ret=952
	ret=-1
	write test.jar failed: Invalid argument.

I have tested this program on XFS filesystem, XFS does not have
this problem, because XFS use iomap_dio_rw() to do direct I/O
read. And the comparing between read offset and file size is done
in iomap_dio_rw(), the code is as following:

	if (pos < size) {
		retval = filemap_write_and_wait_range(mapping, pos,
				pos + iov_length(iov, nr_segs) - 1);

		if (!retval) {
			retval = mapping->a_ops->direct_IO(READ, iocb,
						iov, pos, nr_segs);
		}
		...
	}

...only when "pos < size", direct I/O can be done, or 0 will be return.

I have tested the fix patch on Ext4, it is up to the mustard of
EINVAL in man2(read) as following:
	#include <unistd.h>
	ssize_t read(int fd, void *buf, size_t count);

	EINVAL
		fd is attached to an object which is unsuitable for reading;
		or the file was opened with the O_DIRECT flag, and either the
		address specified in buf, the value specified in count, or the
		current file offset is not suitably aligned.

So I think this patch can be applied to fix ext4 direct I/O error.

However Ext4 introduces direct I/O read using iomap infrastructure
on kernel 5.5, the patch is commit <b1b4705d>
("ext4: introduce direct I/O read using iomap infrastructure"),
then Ext4 will be the same as XFS, they all use iomap_dio_rw() to do direct
I/O read. So this problem does not exist on kernel 5.5 for Ext4.

>From above description, we can see this problem exists on all the kernel
versions between kernel 3.14 and kernel 5.4. It will cause the Applications
to fail to read. For example, when the search service downloads a new full
index file, the search engine is loading the previous index file and is
processing the search request, it can not use buffer io that may squeeze
the previous index file in use from pagecache, so the serch service must
use direct I/O read.

Please apply this patch on these kernel versions, or please use the method
on kernel 5.5 to fix this problem.

Fixes: 9fe55eea

 ("Fix race when checking i_size on direct i/o read")
Reviewed-by: Jan Kara <jack@suse.cz>
Co-developed-by: Wang Long <wanglong19@meituan.com>
Signed-off-by: Wang Long <wanglong19@meituan.com>
Signed-off-by: Jiang Ying <jiangying8582@126.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit c0842fbc upstream.

The addition of percpu.h to the list of includes in random.h revealed
some circular dependencies on arm64 and possibly other platforms.  This
include was added solely for the pseudo-random definitions, which have
nothing to do with the rest of the definitions in this file but are
still there for legacy reasons.

This patch moves the pseudo-random parts to linux/prandom.h and the
percpu.h include with it, which is now guarded by _LINUX_PRANDOM_H and
protected against recursive inclusion.

A further cleanup step would be to remove this from <linux/random.h>
entirely, and make people who use the prandom infrastructure include
just the new header file.  That's a bit of a churn patch, but grepping
for "prandom_" and "next_pseudo_random32" "struct rnd_state" should
catch most users.

But it turns out that that nice cleanup step is fairly painful, because
a _lot_ of code currently seems to depend on the implicit include of
<linux/random.h>, which can currently come in a lot of ways, including
such fairly core headfers as <linux/net.h>.

So the "nice cleanup" part may or may never happen.

Fixes: 1c9df907

 ("random: fix circular include dependency on arm64 after addition of percpu.h")
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 83bdc727 upstream.

It turns out that the plugin right now ends up being really unhappy
about the change from 'static' to 'extern' storage that happened in
commit f227e3ec

 ("random32: update the net random state on interrupt
and activity").

This is probably a trivial fix for the latent_entropy plugin, but for
now, just remove net_rand_state from the list of things the plugin
worries about.

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Emese Revfy <re.emese@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 1c9df907 upstream.

Daniel Díaz and Kees Cook independently reported that commit
f227e3ec

 ("random32: update the net random state on interrupt and
activity") broke arm64 due to a circular dependency on include files
since the addition of percpu.h in random.h.

The correct fix would definitely be to move all the prandom32 stuff out
of random.h but for backporting, a smaller solution is preferred.

This one replaces linux/percpu.h with asm/percpu.h, and this fixes the
problem on x86_64, arm64, arm, and mips.  Note that moving percpu.h
around didn't change anything and that removing it entirely broke
differently.  When backporting, such options might still be considered
if this patch fails to help.

[ It turns out that an alternate fix seems to be to just remove the
  troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h>
  that causes the circular dependency.

  But we might as well do the whole belt-and-suspenders thing, and
  minimize inclusion in <linux/random.h> too. Either will fix the
  problem, and both are good changes.   - Linus ]

Reported-by: Daniel Díaz <daniel.diaz@linaro.org>
Reported-by: Kees Cook <keescook@chromium.org>
Tested-by: Marc Zyngier <maz@kernel.org>
Fixes: f227e3ec


Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit aa54ea90 upstream.

Fix build error for the case:
  defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)

config: keystone_defconfig

  CC      arch/arm/kernel/signal.o
  In file included from ../include/linux/random.h:14,
                    from ../arch/arm/kernel/signal.c:8:
  ../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’:
  ../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’?
      : "Q" (*(const unsigned long *)current_stack_pointer));
                                     ^~~~~~~~~~~~~~~~~~~~~
                                     user_stack_pointer

Fixes: f227e3ec

 ("random32: update the net random state on interrupt and activity")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit f227e3ec

 upstream.

This modifies the first 32 bits out of the 128 bits of a random CPU's
net_rand_state on interrupt or CPU activity to complicate remote
observations that could lead to guessing the network RNG's internal
state.

Note that depending on some network devices' interrupt rate moderation
or binding, this re-seeding might happen on every packet or even almost
never.

In addition, with NOHZ some CPUs might not even get timer interrupts,
leaving their local state rarely updated, while they are running
networked processes making use of the random state.  For this reason, we
also perform this update in update_process_times() in order to at least
update the state when there is user or system activity, since it's the
only case we care about.

Reported-by: Amit Klein <aksecurity@gmail.com>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Tested-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit bdd65589

 upstream.

0day reported a possible circular locking dependency:

Chain exists of:
  &irq_desc_lock_class --> console_owner --> &port_lock_key

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&port_lock_key);
                               lock(console_owner);
                               lock(&port_lock_key);
  lock(&irq_desc_lock_class);

The reason for this is a printk() in the i8259 interrupt chip driver
which is invoked with the irq descriptor lock held, which reverses the
lock operations vs. printk() from arbitrary contexts.

Switch the printk() to printk_deferred() to avoid that.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87365abt2v.fsf@nanos.tec.linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d2286ba7 upstream.

Prevent setting the tscdeadline timer if the lapic is hw disabled.

Fixes: bce87cce

 (KVM: x86: consolidate different ways to test for in-kernel LAPIC)
Cc: <stable@vger.kernel.org>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1596165141-28874-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c2c63310

 ]

There's a potential race in xennet_remove(); this is what the driver is
doing upon unregistering a network device:

  1. state = read bus state
  2. if state is not "Closed":
  3.    request to set state to "Closing"
  4.    wait for state to be set to "Closing"
  5.    request to set state to "Closed"
  6.    wait for state to be set to "Closed"

If the state changes to "Closed" immediately after step 1 we are stuck
forever in step 4, because the state will never go back from "Closed" to
"Closing".

Make sure to check also for state == "Closed" in step 4 to prevent the
deadlock.

Also add a 5 sec timeout any time we wait for the bus state to change,
to avoid getting stuck forever in wait_event().

Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e6827d1a

 ]

In the implementation of uld_send(), the skb is consumed on all
execution paths except one. Release skb when returning NET_XMIT_DROP.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 372a8eaa

 ]

The ORC unwinder fails to unwind newly forked tasks which haven't yet
run on the CPU.  It correctly reads the 'ret_from_fork' instruction
pointer from the stack, but it incorrectly interprets that value as a
call stack address rather than a "signal" one, so the address gets
incorrectly decremented in the call to orc_find(), resulting in bad ORC
data.

Fix it by forcing 'ret_from_fork' frames to be signal frames.

Reported-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lkml.kernel.org/r/f91a8778dde8aae7f71884b5df2b16d552040441.1594994374.git.jpoimboe@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 0db9254d ]

This reverts commit d358def7

.

There are two issues with "i2c: cadence: Fix the hold bit setting" commit.

1. In case of combined message request from user space, when the HOLD
bit is cleared in cdns_i2c_mrecv function, a STOP condition is sent
on the bus even before the last message is started. This is because when
the HOLD bit is cleared, the FIFOS are empty and there is no pending
transfer. The STOP condition should occur only after the last message
is completed.

2. The code added by the commit is redundant. Driver is handling the
setting/clearing of HOLD bit in right way before the commit.

The setting of HOLD bit based on 'bus_hold_flag' is taken care in
cdns_i2c_master_xfer function even before cdns_i2c_msend/cdns_i2c_recv
functions.

The clearing of HOLD bit is taken care at the end of cdns_i2c_msend and
cdns_i2c_recv functions based on bus_hold_flag and byte count.
Since clearing of HOLD bit is done after the slave address is written to
the register (writing to address register triggers the message transfer),
it is ensured that STOP condition occurs at the right time after
completion of the pending transfer (last message).

Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 015c5d5e

 ]

According to the report of [1], this driver is possible to cause
the following error in ravb_tx_timeout_work().

ravb e6800000.ethernet ethernet: failed to switch device to config mode

This error means that the hardware could not change the state
from "Operation" to "Configuration" while some tx and/or rx queue
are operating. After that, ravb_config() in ravb_dmac_init() will fail,
and then any descriptors will be not allocaled anymore so that NULL
pointer dereference happens after that on ravb_start_xmit().

To fix the issue, the ravb_tx_timeout_work() should check
the return values of ravb_stop_dma() and ravb_dmac_init().
If ravb_stop_dma() fails, ravb_tx_timeout_work() re-enables TX and RX
and just exits. If ravb_dmac_init() fails, just exits.

[1]
https://lore.kernel.org/linux-renesas-soc/20200518045452.2390-1-dirk.behme@de.bosch.com/

Reported-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit b344d6a8

 ]

The kernel test bot reported[1] that using set_mask_bits on a u8 causes
the following issue on parisc:

	hppa-linux-ld: drivers/phy/ti/phy-tusb1210.o: in function `tusb1210_probe':
	>> (.text+0x2f4): undefined reference to `__cmpxchg_called_with_bad_pointer'
	>> hppa-linux-ld: (.text+0x324): undefined reference to `__cmpxchg_called_with_bad_pointer'
	hppa-linux-ld: (.text+0x354): undefined reference to `__cmpxchg_called_with_bad_pointer'

Add support for cmpxchg on u8 pointers.

[1] https://lore.kernel.org/patchwork/patch/1272617/#1468946

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Tested-by: Dave Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1e8fd3a9

 ]

The implementation of s3fwrn5_recv_frame() is supposed to consume skb on
all execution paths. Release skb before returning -ENODEV.

Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1d61e218

 ]

This is likely firmware causing this but its starting to annoy customers.
Change the message level to verbose to prevent the spam.
Note that this seems to only show up with ISCSI enabled on the HBA via the
qedi driver.

Signed-off-by: Laurence Oberman <loberman@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e0484010

 ]

On sparc32, tcflag_t is "unsigned long", unlike on all other
architectures, where it is "unsigned int":

    drivers/net/usb/hso.c: In function ‘hso_serial_set_termios’:
    include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 4 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=]
    drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’
       hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n",
       ^~~~~~~
    include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 5 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=]
    drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’
       hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n",
       ^~~~~~~

As "unsigned long" is 32-bit on sparc32, fix this by casting all tcflag_t
parameters to "unsigned int".
While at it, use "%u" to format unsigned numbers.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e692139e ]

The function invokes bpf_prog_inc(), which increases the reference
count of a bpf_prog object "rq->xdp_prog" if the object isn't NULL.

The refcount leak issues take place in two error handling paths. When
either mlx5_wq_ll_create() or mlx5_wq_cyc_create() fails, the function
simply returns the error code and forgets to drop the reference count
increased earlier, causing a reference count leak of "rq->xdp_prog".

Fix this issue by jumping to the error handling path err_rq_wq_destroy
while either function fails.

Fixes: 422d4c40

 ("net/mlx5e: RX, Split WQ objects for different RQ types")
Signed-off-by: Xin Xiong <xiongx18@fudan.edu.cn>
Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn>
Signed-off-by: Xin Tan <tanxin.ctf@gmail.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 85496a29 ]

Fix the missing clk_disable_unprepare() before return
from gemini_ethernet_port_probe() in the error handling case.

Fixes: 4d5ae32f

 ("net: ethernet: Add a driver for Gemini gigabit ethernet")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit a2ec905d ]

Fix kernel oops observed when an ext adv data is larger than 31 bytes.

This can be reproduced by setting up an advertiser with advertisement
larger than 31 bytes.  The issue is not sensitive to the advertisement
content.  In particular, this was reproduced with an advertisement of
229 bytes filled with 'A'.  See stack trace below.

This is fixed by not catching ext_adv as legacy adv are only cached to
be able to concatenate a scanable adv with its scan response before
sending it up through mgmt.

With ext_adv, this is no longer necessary.

  general protection fault: 0000 [#1] SMP PTI
  CPU: 6 PID: 205 Comm: kworker/u17:0 Not tainted 5.4.0-37-generic #41-Ubuntu
  Hardware name: Dell Inc. XPS 15 7590/0CF6RR, BIOS 1.7.0 05/11/2020
  Workqueue: hci0 hci_rx_work [bluetooth]
  RIP: 0010:hci_bdaddr_list_lookup+0x1e/0x40 [bluetooth]
  Code: ff ff e9 26 ff ff ff 0f 1f 44 00 00 0f 1f 44 00 00 55 48 8b 07 48 89 e5 48 39 c7 75 0a eb 24 48 8b 00 48 39 f8 74 1c 44 8b 06 <44> 39 40 10 75 ef 44 0f b7 4e 04 66 44 39 48 14 75 e3 38 50 16 75
  RSP: 0018:ffffbc6a40493c70 EFLAGS: 00010286
  RAX: 4141414141414141 RBX: 000000000000001b RCX: 0000000000000000
  RDX: 0000000000000000 RSI: ffff9903e76c100f RDI: ffff9904289d4b28
  RBP: ffffbc6a40493c70 R08: 0000000093570362 R09: 0000000000000000
  R10: 0000000000000000 R11: ffff9904344eae38 R12: ffff9904289d4000
  R13: 0000000000000000 R14: 00000000ffffffa3 R15: ffff9903e76c100f
  FS: 0000000000000000(0000) GS:ffff990434580000(0000) knlGS:0000000000000000
  CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
  CR2: 00007feed125a000 CR3: 00000001b860a003 CR4: 00000000003606e0
  Call Trace:
    process_adv_report+0x12e/0x560 [bluetooth]
    hci_le_meta_evt+0x7b2/0xba0 [bluetooth]
    hci_event_packet+0x1c29/0x2a90 [bluetooth]
    hci_rx_work+0x19b/0x360 [bluetooth]
    process_one_work+0x1eb/0x3b0
    worker_thread+0x4d/0x400
    kthread+0x104/0x140

Fixes: c215e939

 ("Bluetooth: Process extended ADV report event")
Reported-by: Andy Nguyen <theflow@google.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reported-by: Balakrishna Godavarthi <bgodavar@codeaurora.org>
Signed-off-by: Alain Michaud <alainm@chromium.org>
Tested-by: Sonny Sasaka <sonnysasaka@chromium.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 05fb3dbd ]

Although iph is expected to point to at least 20 bytes of valid memory,
ihl may be bogus, for example on reception of a corrupt packet. If it
happens to be less than 5, we really don't want to run away and
dereference 16GB worth of memory until it wraps back to exactly zero...

Fixes: 0e455d8e

 ("arm64: Implement optimised IP checksum helpers")
Reported-by: guodeqing <geffrey.guo@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 966a0acc ]

Commit f7b93d42 ("arm64/alternatives: use subsections for replacement
sequences") breaks LLVM's integrated assembler, because due to its
one-pass design, it cannot compute instruction sequence lengths before the
layout for the subsection has been finalized. This change fixes the build
by moving the .org directives inside the subsection, so they are processed
after the subsection layout is known.

Fixes: f7b93d42

 ("arm64/alternatives: use subsections for replacement sequences")
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/1078
Link: https://lore.kernel.org/r/20200730153701.3892953-1-samitolvanen@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5e43540c ]

A mpath object can hold reference on a list of skb that are waiting for
mpath resolution to be sent. When destroying a mpath this skb list
should be cleaned up in order to not leak memory.

Fixing that kind of leak:

unreferenced object 0xffff0000181c9300 (size 1088):
  comm "openvpn", pid 1782, jiffies 4295071698 (age 80.416s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 f9 80 36 00 00 00 00 00  ..........6.....
    02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00  ...@............
  backtrace:
    [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0
    [<000000002caaef13>] sk_prot_alloc.isra.39+0x34/0x178
    [<00000000ceeaa916>] sk_alloc+0x34/0x228
    [<00000000ca1f1d04>] inet_create+0x198/0x518
    [<0000000035626b1c>] __sock_create+0x134/0x328
    [<00000000a12b3a87>] __sys_socket+0xb0/0x158
    [<00000000ff859f23>] __arm64_sys_socket+0x40/0x58
    [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0
    [<0000000005b5157d>] el0_svc+0x8/0xc
unreferenced object 0xffff000012973a40 (size 216):
  comm "openvpn", pid 1782, jiffies 4295082137 (age 38.660s)
  hex dump (first 32 bytes):
    00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
    00 c0 06 16 00 00 ff ff 00 93 1c 18 00 00 ff ff  ................
  backtrace:
    [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0
    [<0000000023c8c8f9>] __alloc_skb+0xc0/0x2b8
    [<000000007ad950bb>] alloc_skb_with_frags+0x60/0x320
    [<00000000ef90023a>] sock_alloc_send_pskb+0x388/0x3c0
    [<00000000104fb1a3>] sock_alloc_send_skb+0x1c/0x28
    [<000000006919d2dd>] __ip_append_data+0xba4/0x11f0
    [<0000000083477587>] ip_make_skb+0x14c/0x1a8
    [<0000000024f3d592>] udp_sendmsg+0xaf0/0xcf0
    [<000000005aabe255>] inet_sendmsg+0x5c/0x80
    [<000000008651ea08>] __sys_sendto+0x15c/0x218
    [<000000003505c99b>] __arm64_sys_sendto+0x74/0x90
    [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0
    [<0000000005b5157d>] el0_svc+0x8/0xc

Fixes: 2bdaf386

 (mac80211: mesh: move path tables into if_mesh)
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://lore.kernel.org/r/20200704135419.27703-1-repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 6a01afcf ]

At ieee80211_join_mesh() some ie data could have been allocated (see
copy_mesh_setup()) and need to be cleaned up when leaving the mesh.

This fixes the following kmemleak report:

unreferenced object 0xffff0000116bc600 (size 128):
  comm "wpa_supplicant", pid 608, jiffies 4294898983 (age 293.484s)
  hex dump (first 32 bytes):
    30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00  0...............
    00 0f ac 08 00 00 00 00 c4 65 40 00 00 00 00 00  .........e@.....
  backtrace:
    [<00000000bebe439d>] __kmalloc_track_caller+0x1c0/0x330
    [<00000000a349dbe1>] kmemdup+0x28/0x50
    [<0000000075d69baa>] ieee80211_join_mesh+0x6c/0x3b8 [mac80211]
    [<00000000683bb98b>] __cfg80211_join_mesh+0x1e8/0x4f0 [cfg80211]
    [<0000000072cb507f>] nl80211_join_mesh+0x520/0x6b8 [cfg80211]
    [<0000000077e9bcf9>] genl_family_rcv_msg+0x374/0x680
    [<00000000b1bd936d>] genl_rcv_msg+0x78/0x108
    [<0000000022c53788>] netlink_rcv_skb+0xb0/0x1c0
    [<0000000011af8ec9>] genl_rcv+0x34/0x48
    [<0000000069e41f53>] netlink_unicast+0x268/0x2e8
    [<00000000a7517316>] netlink_sendmsg+0x320/0x4c0
    [<0000000069cba205>] ____sys_sendmsg+0x354/0x3a0
    [<00000000e06bab0f>] ___sys_sendmsg+0xd8/0x120
    [<0000000037340728>] __sys_sendmsg+0xa4/0xf8
    [<000000004fed9776>] __arm64_sys_sendmsg+0x44/0x58
    [<000000001c1e5647>] el0_svc_handler+0xd0/0x1a0

Fixes: c80d545d

 (mac80211: Let userspace enable and configure vendor specific path selection.)
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Link: https://lore.kernel.org/r/20200704135007.27292-1-repk@triplefau.lt
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 1d4e1eab ]

Fix HASH_OF_MAPS bug of not putting inner map pointer on bpf_map_elem_update()
operation. This is due to per-cpu extra_elems optimization, which bypassed
free_htab_elem() logic doing proper clean ups. Make sure that inner map is put
properly in optimized case as well.

Fixes: 8c290e60

 ("bpf: fix hashmap extra_elems logic")
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200729040913.2815687-1-andriin@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 27a2145d ]

RX queue IRQ mappings are disposed in both the TX IRQ and RX IRQ
error paths. Fix this and dispose of TX IRQ mappings correctly in
case of an error.

Fixes: ea22d51a

 ("ibmvnic: simplify and improve driver probe function")
Signed-off-by: Thomas Falcon <tlfalcon@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3c8ce24b ]

The lifetime of EMAD transactions (i.e., 'struct mlxsw_reg_trans') is
managed using RCU. They are freed using kfree_rcu() once the transaction
ends.

However, in case the transaction failed it is freed immediately after being
removed from the active transactions list. This is problematic because it is
still possible for a different CPU to dereference the transaction from an RCU
read-side critical section while traversing the active transaction list in
mlxsw_emad_rx_listener_func(). In which case, a use-after-free is triggered
[1].

Fix this by freeing the transaction after a grace period by calling
kfree_rcu().

[1]
BUG: KASAN: use-after-free in mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671
Read of size 8 at addr ffff88800b7964e8 by task syz-executor.2/2881

CPU: 0 PID: 2881 Comm: syz-executor.2 Not tainted 5.8.0-rc4+ #44
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014
Call Trace:
 <IRQ>
 __dump_stack lib/dump_stack.c:77 [inline]
 dump_stack+0xf6/0x16e lib/dump_stack.c:118
 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383
 __kasan_report mm/kasan/report.c:513 [inline]
 kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530
 mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671
 mlxsw_core_skb_receive+0x571/0x700 drivers/net/ethernet/mellanox/mlxsw/core.c:2061
 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline]
 mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651
 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550
 __do_softirq+0x223/0x964 kernel/softirq.c:292
 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711
 </IRQ>
 __run_on_irqstack arch/x86/include/asm/irq_stack.h:22 [inline]
 run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:48 [inline]
 do_softirq_own_stack+0x109/0x140 arch/x86/kernel/irq_64.c:77
 invoke_softirq kernel/softirq.c:387 [inline]
 __irq_exit_rcu kernel/softirq.c:417 [inline]
 irq_exit_rcu+0x16f/0x1a0 kernel/softirq.c:429
 sysvec_apic_timer_interrupt+0x4e/0xd0 arch/x86/kernel/apic/apic.c:1091
 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:587
RIP: 0010:arch_local_irq_restore arch/x86/include/asm/irqflags.h:85 [inline]
RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline]
RIP: 0010:_raw_spin_unlock_irqrestore+0x3b/0x40 kernel/locking/spinlock.c:191
Code: e8 2a c3 f4 fc 48 89 ef e8 12 96 f5 fc f6 c7 02 75 11 53 9d e8 d6 db 11 fd 65 ff 0d 1f 21 b3 56 5b 5d c3 e8 a7 d7 11 fd 53 9d <eb> ed 0f 1f 00 55 48 89 fd 65 ff 05 05 21 b3 56 ff 74 24 08 48 8d
RSP: 0018:ffff8880446ffd80 EFLAGS: 00000286
RAX: 0000000000000006 RBX: 0000000000000286 RCX: 0000000000000006
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa94ecea9
RBP: ffff888012934408 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000001 R11: fffffbfff57be301 R12: 1ffff110088dffc1
R13: ffff888037b817c0 R14: ffff88802442415a R15: ffff888024424000
 __do_sys_perf_event_open+0x1b5d/0x2bd0 kernel/events/core.c:11874
 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384
 entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x473dbd
Code: Bad RIP value.
RSP: 002b:00007f21e5e9cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000012a
RAX: ffffffffffffffda RBX: 000000000057bf00 RCX: 0000000000473dbd
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000040
RBP: 000000000057bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000003 R11: 0000000000000246 R12: 000000000057bf0c
R13: 00007ffd0493503f R14: 00000000004d0f46 R15: 00007f21e5e9cd80

Allocated by task 871:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 __kasan_kmalloc mm/kasan/common.c:494 [inline]
 __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467
 kmalloc include/linux/slab.h:555 [inline]
 kzalloc include/linux/slab.h:669 [inline]
 mlxsw_core_reg_access_emad+0x70/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1812
 mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991
 mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130
 update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173
 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
 kthread+0x355/0x470 kernel/kthread.c:291
 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293

Freed by task 871:
 save_stack+0x1b/0x40 mm/kasan/common.c:48
 set_track mm/kasan/common.c:56 [inline]
 kasan_set_free_info mm/kasan/common.c:316 [inline]
 __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455
 slab_free_hook mm/slub.c:1474 [inline]
 slab_free_freelist_hook mm/slub.c:1507 [inline]
 slab_free mm/slub.c:3072 [inline]
 kfree+0xe6/0x320 mm/slub.c:4052
 mlxsw_core_reg_access_emad+0xd45/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1819
 mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991
 mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130
 update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173
 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269
 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415
 kthread+0x355/0x470 kernel/kthread.c:291
 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293

The buggy address belongs to the object at ffff88800b796400
 which belongs to the cache kmalloc-512 of size 512
The buggy address is located 232 bytes inside of
 512-byte region [ffff88800b796400, ffff88800b796600)
The buggy address belongs to the page:
page:ffffea00002de500 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea00002de500 order:2 compound_mapcount:0 compound_pincount:0
flags: 0x100000000010200(slab|head)
raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c402500
raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff88800b796380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 ffff88800b796400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
>ffff88800b796480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
                                                          ^
 ffff88800b796500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 ffff88800b796580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: caf7297e

 ("mlxsw: core: Introduce support for asynchronous EMAD register access")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7d8e8f34 ]

The lifetime of the Rx listener item ('rxl_item') is managed using RCU,
but is dereferenced outside of RCU read-side critical section, which can
lead to a use-after-free.

Fix this by increasing the scope of the RCU read-side critical section.

Fixes: 93c1edb2

 ("mlxsw: Introduce Mellanox switch driver core")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3cab8c65 ]

It appears that not disabling a PCI device on .shutdown may lead to
a Hardware Error with particular (perhaps buggy) BIOS versions:

    mlx4_en: eth0: Close port called
    mlx4_en 0000:04:00.0: removed PHC
    reboot: Restarting system
    {1}[Hardware Error]: Hardware error from APEI Generic Hardware Error Source: 1
    {1}[Hardware Error]: event severity: fatal
    {1}[Hardware Error]:  Error 0, type: fatal
    {1}[Hardware Error]:   section_type: PCIe error
    {1}[Hardware Error]:   port_type: 4, root port
    {1}[Hardware Error]:   version: 1.16
    {1}[Hardware Error]:   command: 0x4010, status: 0x0143
    {1}[Hardware Error]:   device_id: 0000:00:02.2
    {1}[Hardware Error]:   slot: 0
    {1}[Hardware Error]:   secondary_bus: 0x04
    {1}[Hardware Error]:   vendor_id: 0x8086, device_id: 0x2f06
    {1}[Hardware Error]:   class_code: 000604
    {1}[Hardware Error]:   bridge: secondary_status: 0x2000, control: 0x0003
    {1}[Hardware Error]:   aer_uncor_status: 0x00100000, aer_uncor_mask: 0x00000000
    {1}[Hardware Error]:   aer_uncor_severity: 0x00062030
    {1}[Hardware Error]:   TLP Header: 40000018 040000ff 791f4080 00000000
[hw error repeats]
    Kernel panic - not syncing: Fatal hardware error!
    CPU: 0 PID: 2189 Comm: reboot Kdump: loaded Not tainted 5.6.x-blabla #1
    Hardware name: HP ProLiant DL380 Gen9/ProLiant DL380 Gen9, BIOS P89 05/05/2017

Fix the mlx4 driver.

This is a very similar problem to what had been fixed in:
commit 0d98ba8d ("scsi: hpsa: disable device during shutdown")
to address https://bugzilla.kernel.org/show_bug.cgi?id=199779.

Fixes: 2ba5fbd6

 ("net/mlx4_core: Handle AER flow properly")
Reported-by: Jake Lawrence <lawja@fb.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 63634aa6 ]

The interrupt URB transfer-buffer was never freed on disconnect or after
probe errors.

Fixes: 55d7de9d

 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8d8e95fd ]

Add the missing endpoint sanity check to prevent a NULL-pointer
dereference should a malicious device lack the expected endpoints.

Note that the driver has a broken endpoint-lookup helper,
lan78xx_get_endpoints(), which can end up accepting interfaces in an
altsetting without endpoints as long as *some* altsetting has a bulk-in
and a bulk-out endpoint.

Fixes: 55d7de9d

 ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Cc: Woojung.Huh@microchip.com <Woojung.Huh@microchip.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 071995c8 ]

Fix a bug where driver did not verify Hardware pin capabilities for
PTP functions.

Fixes: ee7f1220

 ("net/mlx5e: Implement 1PPS support")
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 04a8a3d0

 ]

The slow path for traced system call entries accessed a wrong memory
location to get the number of the maximum allowed system call number.
Renumber the numbered "local" label for the correct location to avoid
collisions with actual local labels.

Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Fixes: f3a83088

 ("sh: Add a few missing irqflags tracing markers.")
Signed-off-by: Rich Felker <dalias@libc.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 64f9ede2 ]

Clang 9 threw:
warning: format specifies type 'unsigned short' but the argument has \
type 'int' [-Wformat]
                typeflags, PORT_BASE, PORT_BASE + port_off);

Tested: make -C tools/testing/selftests TARGETS="net" run_tests

Fixes: 77f65ebd

 ("packet: packet fanout rollover during socket overload")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 955cbe91 ]

The signedness of char is implementation-dependent. Some systems
(including PowerPC and ARM) use unsigned char. Clang 9 threw:
warning: result of comparison of constant -1 with expression of type \
'char' is always true [-Wtautological-constant-out-of-range-compare]
                                  &arg_index)) != -1) {

Tested: make -C tools/testing/selftests TARGETS="net" run_tests

Fixes: 16e78122

 ("selftests/net: Add a test to validate behavior of rx timestamps")
Signed-off-by: Tanner Love <tannerlove@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 101dde42 ]

The commits "xfrm: Move dst->path into struct xfrm_dst"
and "net: Create and use new helper xfrm_dst_child()."
changed xfrm bundle handling under the assumption
that xdst->path and dst->child are not a NULL pointer
only if dst->xfrm is not a NULL pointer. That is true
with one exception. If the xfrm hold queue is used
to wait until a SA is installed by the key manager,
we create a dummy bundle without a valid dst->xfrm
pointer. The current xfrm bundle handling crashes
in that case. Fix this by extending the NULL check
of dst->xfrm with a test of the DST_XFRM_QUEUE flag.

Fixes: 0f6c480f ("xfrm: Move dst->path into struct xfrm_dst")
Fixes: b92cf4aa

 ("net: Create and use new helper xfrm_dst_child().")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>