- Feb 10, 2020
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "Two small fixes for the time(r) subsystem: - Handle a subtle race between the clocksource watchdog and a concurrent clocksource watchdog stop/start sequence correctly to prevent a timer double add bug. - Fix the file path for the core time namespace file" * tag 'timers-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: Prevent double add_timer_on() for watchdog_timer MAINTAINERS: Correct path to time namespace source file
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull interrupt fixes from Thomas Gleixner: "A set of fixes for the interrupt subsystem: - Provision only ACPI enabled redistributors on GICv3 - Use the proper command colums when building the INVALL command for the GICv3-ITS - Ensure the allocation of the L2 vPE table for GICv4.1 - Correct the GICv4.1 VPROBASER programming so it uses the proper size - A set of small GICv4.1 tidy up patches - Configuration cleanup for C-SKY interrupt chip - Clarify the function documentation for irq_set_wake() to document that the wakeup functionality is orthogonal to the irq disable/enable mechanism" * tag 'irq-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic-v3-its: Rename VPENDBASER/VPROPBASER accessors irqchip/gic-v3-its: Remove superfluous WARN_ON irqchip/gic-v4.1: Drop 'tmp' in inherit_vpe_l1_table_from_rd() irqchip/gic-v4.1: Ensure L2 vPE table is allocated at RD level irqchip/gic-v4.1: Set vpe_l1_base for all redistributors irqchip/gic-v4.1: Fix programming of GICR_VPROPBASER_4_1_SIZE genirq: Clarify that irq wake state is orthogonal to enable/disable irqchip/gic-v3-its: Reference to its_invall_cmd descriptor when building INVALL irqchip: Some Kconfig cleanup for C-SKY irqchip/gic-v3: Only provision redistributors that are enabled in ACPI
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull EFI fix from Thomas Gleixner: "A single fix for a EFI boot regression on X86 which was caused by the recent rework of the EFI memory map parsing. On systems with invalid memmap entries the cleanup function uses an value which cannot be relied on in this stage. Use the actual EFI memmap entry instead" * tag 'efi-urgent-2020-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: efi/x86: Fix boot regression on systems with invalid memmap entries
-
- Feb 09, 2020
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull misc SCSI fixes from James Bottomley: "Five small patches, all in drivers or doc, which missed the initial pull request. The qla2xxx and megaraid_sas are actual fixes and the rest are spelling and doc changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: ufs: fix spelling mistake "initilized" -> "initialized" scsi: pm80xx: fix spelling mistake "to" -> "too" scsi: MAINTAINERS: ufs: remove pedrom.sousa@synopsys.com scsi: megaraid_sas: fixup MSIx interrupt setup during resume scsi: qla2xxx: Fix unbound NVME response length
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Unbalanced locking in mwifiex_process_country_ie, from Brian Norris. 2) Fix thermal zone registration in iwlwifi, from Andrei Otcheretianski. 3) Fix double free_irq in sgi ioc3 eth, from Thomas Bogendoerfer. 4) Use after free in mptcp, from Florian Westphal. 5) Use after free in wireguard's root_remove_peer_lists, from Eric Dumazet. 6) Properly access packets heads in bonding alb code, from Eric Dumazet. 7) Fix data race in skb_queue_len(), from Qian Cai. 8) Fix regression in r8169 on some chips, from Heiner Kallweit. 9) Fix XDP program ref counting in hv_netvsc, from Haiyang Zhang. 10) Certain kinds of set link netlink operations can cause a NULL deref in the ipv6 addrconf code. Fix from Eric Dumazet. 11) Don't cancel uninitialized work queue in drop monitor, from Ido Schimmel. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits) net: thunderx: use proper interface type for RGMII mt76: mt7615: fix max_nss in mt7615_eeprom_parse_hw_cap bpf: Improve bucket_log calculation logic selftests/bpf: Test freeing sockmap/sockhash with a socket in it bpf, sockhash: Synchronize_rcu before free'ing map bpf, sockmap: Don't sleep while holding RCU lock on tear-down bpftool: Don't crash on missing xlated program instructions bpf, sockmap: Check update requirements after locking drop_monitor: Do not cancel uninitialized work item mlxsw: spectrum_dpipe: Add missing error path mlxsw: core: Add validation of hardware device types for MGPIR register mlxsw: spectrum_router: Clear offload indication from IPv6 nexthops on abort selftests: mlxsw: Add test cases for local table route replacement mlxsw: spectrum_router: Prevent incorrect replacement of local table routes net: dsa: microchip: enable module autoprobe ipv6/addrconf: fix potential NULL deref in inet6_set_link_af() dpaa_eth: support all modes with rate adapting PHYs net: stmmac: update pci platform data to use phy_interface net: stmmac: xgmac: fix missing IFF_MULTICAST checki in dwxgmac2_set_filter net: stmmac: fix missing IFF_MULTICAST check in dwmac4_set_filter ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: - Fix an existing bug in our user access handling, exposed by one of the bug fixes we merged this cycle. - A fix for a boot hang on 32-bit with CONFIG_TRACE_IRQFLAGS and the recently added CONFIG_VMAP_STACK. Thanks to: Christophe Leroy, Guenter Roeck. * tag 'powerpc-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Fix CONFIG_TRACE_IRQFLAGS with CONFIG_VMAP_STACK powerpc/futex: Fix incorrect user access blocking
-
Linus Torvalds authored
This is a merge error on my part - the driver was merged into mainline by commit c5951e7c ("Merge tag 'mips_5.6' of git://../mips/linux") over a week ago, but nobody apparently noticed that it didn't actually build due to still having a reference to the devm_ioremap_nocache() function, removed a few days earlier through commit 6a1000bd ("Merge tag 'ioremap-5.6' of git://../ioremap" ). Apparently this didn't get any build testing anywhere. Not perhaps all that surprising: it's restricted to 64-bit MIPS only, and only with the new SGI_MFD_IOC3 support enabled. I only noticed because the ioremap conflicts in the ARM SoC driver update made me check there weren't any others hiding, and I found this one. Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC late updates from Olof Johansson: "This is some material that we picked up into our tree late, or that had more complex dependencies on more than one topic branch that makes sense to keep separately. - TI support for secure accelerators and hwrng on OMAP4/5 - TI camera changes for dra7 and am437x and SGX improvement due to better reset control support on am335x, am437x and dra7 - Davinci moves to proper clocksource on DM365, and regulator/audio improvements for DM365 and DM644x eval boards" * tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (32 commits) ARM: dts: omap4-droid4: Enable hdq for droid4 ds250x 1-wire battery nvmem ARM: dts: motorola-cpcap-mapphone: Configure calibration interrupt ARM: dts: Configure interconnect target module for am437x sgx ARM: dts: Configure sgx for dra7 ARM: dts: Configure rstctrl reset for am335x SGX ARM: dts: dra7: Add ti-sysc node for VPE ARM: dts: dra7: add vpe clkctrl node ARM: dts: am43x-epos-evm: Add VPFE and OV2659 entries ARM: dts: am437x-sk-evm: Add VPFE and OV2659 entries ARM: dts: am43xx: add support for clkout1 clock arm: dts: dra76-evm: Add CAL and OV5640 nodes arm: dtsi: dra76x: Add CAL dtsi node arm: dts: dra72-evm-common: Add entries for the CSI2 cameras ARM: dts: DRA72: Add CAL dtsi node ARM: dts: dra7-l4: Add ti-sysc node for CAM ARM: OMAP: DRA7xx: Make CAM clock domain SWSUP only ARM: dts: dra7: add cam clkctrl node ARM: OMAP2+: Drop legacy platform data for omap4 des ARM: OMAP2+: Drop legacy platform data for omap4 sham ARM: OMAP2+: Drop legacy platform data for omap4 aes ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC defconfig updates from Olof Johansson: "We keep this in a separate branch to avoid cross-branch conflicts, but most of the material here is fairly boring -- some new drivers turned on for hardware since they were merged, and some refreshed files due to time having moved a lot of entries around" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits) ARM: configs: at91: enable MMC_SDHCI_OF_AT91 and MICROCHIP_PIT64B arm64: defconfig: Enable Broadcom's GENET Ethernet controller ARM: multi_v7_defconfig: Enable devfreq thermal integration ARM: exynos_defconfig: Enable devfreq thermal integration ARM: multi_v7_defconfig: Enable NFS v4.1 and v4.2 ARM: exynos_defconfig: Enable NFS v4.1 and v4.2 arm64: defconfig: Enable Actions Semi specific drivers arm64: defconfig: Enable Broadcom's STB PCIe controller arm64: defconfig: Enable CONFIG_CLK_IMX8MP by default ARM: configs: at91: enable config flags for sam9x60 SoC ARM: configs: at91: use savedefconfig arm64: defconfig: Enable tegra XUDC support ARM: defconfig: gemini: Update defconfig arm64: defconfig: enable CONFIG_ARM_QCOM_CPUFREQ_NVMEM arm64: defconfig: enable CONFIG_QCOM_CPR arm64: defconfig: Enable HFPLL arm64: defconfig: Enable CRYPTO_DEV_FSL_CAAM ARM: imx_v6_v7_defconfig: Select the TFP410 driver ARM: imx_v6_v7_defconfig: Enable NFS_V4_1 and NFS_V4_2 support arm64: defconfig: Enable ATH10K_SNOC ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms: - Nvidia: Fuse support for Tegra194, continued memory controller pieces for Tegra30 - NXP/FSL: Refactorings of QuickEngine drivers to support ARM/ARM64/PPC - NXP/FSL: i.MX8MP SoC driver pieces - TI Keystone: ring accelerator driver - Qualcomm: SCM driver cleanup/refactoring + support for new SoCs. - Xilinx ZynqMP: feature checking interface for firmware. Mailbox communication for power management - Overall support patch set for cpuidle on more complex hierarchies (PSCI-based) and misc cleanups, refactorings of Marvell, TI, other platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (166 commits) drivers: soc: xilinx: Use mailbox IPI callback dt-bindings: power: reset: xilinx: Add bindings for ipi mailbox drivers: soc: ti: knav_qmss_queue: Pass lockdep expression to RCU lists MAINTAINERS: Add brcmstb PCIe controller entry soc/tegra: fuse: Unmap registers once they are not needed anymore soc/tegra: fuse: Correct straps' address for older Tegra124 device trees soc/tegra: fuse: Warn if straps are not ready soc/tegra: fuse: Cache values of straps and Chip ID registers memory: tegra30-emc: Correct error message for timed out auto calibration memory: tegra30-emc: Firm up hardware programming sequence memory: tegra30-emc: Firm up suspend/resume sequence soc/tegra: regulators: Do nothing if voltage is unchanged memory: tegra: Correct reset value of xusb_hostr soc/tegra: fuse: Add APB DMA dependency for Tegra20 bus: tegra-aconnect: Remove PM_CLK dependency dt-bindings: mediatek: add MT6765 power dt-bindings soc: mediatek: cmdq: delete not used define memory: tegra: Add support for the Tegra194 memory controller memory: tegra: Only include support for enabled SoCs memory: tegra: Support DVFS on Tegra186 and later ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM Device-tree updates from Olof Johansson: "New SoCs: - Atmel/Microchip SAM9X60 (ARM926 SoC) - OMAP 37xx gets split into AM3703/AM3715/DM3725, who are all variants of it with different GPU/media IP configurations. - ST stm32mp15 SoCs (1-2 Cortex-A7, CAN, GPU depending on SKU) - ST Ericsson ab8505 (variant of ab8500) and db8520 (variant of db8500) - Unisoc SC9863A SoC (8x Cortex-A55 mobile chipset w/ GPU, modem) - Qualcomm SC7180 (8-core 64bit SoC, unnamed CPU class) New boards: - Allwinner: + Emlid Neutis SoM (H3 variant) + Libre Computer ALL-H3-IT + PineH64 Model B - Amlogic: + Libretech Amlogic GX PC (s905d and s912-based variants) - Atmel/Microchip: + Kizboxmini, sam9x60 EK, sama5d27 Wireless SOM (wlsom1) - Marvell: + Armada 385-based SolidRun Clearfog GTR - NXP: + Gateworks GW59xx boards based on i.MX6/6Q/6QDL + Tolino Shine 3 eBook reader (i.MX6sl) + Embedded Artists COM (i.MX7ULP) + SolidRun CLearfog CX/ITX and HoneyComb (LX2160A-based systems) + Google Coral Edge TPU (i.MX8MQ) - Rockchip: + Radxa Dalang Carrier (supports rk3288 and rk3399 SOMs) + Radxa Rock Pi N10 (RK3399Pro-based) + VMARC RK3399Pro SOM - ST: + Reference boards for stm32mp15 - ST Ericsson: + Samsung Galaxy S III mini (GT-I8190) + HREF520 reference board for DB8520 - TI OMAP: + Gen1 Amazon Echo (OMAP3630-based) - Qualcomm: + Inforce 6640 Single Board Computer (msm8996-based) + SC7180 IDP (SC7180-based)" * tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (623 commits) dt-bindings: fix compilation error of the example in marvell,mmp3-hsic-phy.yaml arm64: dts: ti: k3-am654-base-board: Add CSI2 OV5640 camera arm64: dts: ti: k3-am65-main Add CAL node arm64: dts: ti: k3-j721e-main: Add McASP nodes arm64: dts: ti: k3-am654-main: Add McASP nodes arm64: dts: ti: k3-j721e: DMA support arm64: dts: ti: k3-j721e-main: Move secure proxy and smmu under main_navss arm64: dts: ti: k3-j721e-main: Correct main NAVSS representation arm64: dts: ti: k3-j721e: Correct the address for MAIN NAVSS arm64: dts: ti: k3-am65: DMA support arm64: dts: ti: k3-am65-main: Move secure proxy under cbass_main_navss arm64: dts: ti: k3-am65-main: Correct main NAVSS representation ARM: dts: aspeed: rainier: Add UCD90320 power sequencer ARM: dts: aspeed: rainier: Switch PSUs to unknown version arm64: dts: rockchip: Kill off "simple-panel" compatibles ARM: dts: rockchip: Kill off "simple-panel" compatibles arm64: dts: rockchip: rename dwmmc node names to mmc ARM: dts: rockchip: rename dwmmc node names to mmc arm64: dts: exynos: Rename Samsung and Exynos to lowercase arm64: dts: uniphier: add reset-names to NAND controller node ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC platform updates from Olof Johansson: "Most of these are smaller fixes that have accrued, and some continued cleanup of OMAP platforms towards shared frameworks. One new SoC from Atmel/Microchip: sam9x60" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (35 commits) ARM: OMAP2+: Fix undefined reference to omap_secure_init ARM: s3c64xx: Drop unneeded select of TIMER_OF ARM: exynos: Drop unneeded select of MIGHT_HAVE_CACHE_L2X0 ARM: s3c24xx: Switch to atomic pwm API in rx1950 ARM: OMAP2+: sleep43xx: Call secure suspend/resume handlers ARM: OMAP2+: Use ARM SMC Calling Convention when OP-TEE is available ARM: OMAP2+: Introduce check for OP-TEE in omap_secure_init() ARM: OMAP2+: Add omap_secure_init callback hook for secure initialization ARM: at91: Documentation: add sam9x60 product and datasheet ARM: at91: pm: use of_device_id array to find the proper shdwc node ARM: at91: pm: use SAM9X60 PMC's compatible ARM: imx: only select ARM_ERRATA_814220 for ARMv7-A ARM: zynq: use physical cpuid in zynq_slcr_cpu_stop/start ARM: tegra: Use clk_m CPU on Tegra124 LP1 resume ARM: tegra: Modify reshift divider during LP1 ARM: tegra: Enable PLLP bypass during Tegra124 LP1 ARM: samsung: Rename Samsung and Exynos to lowercase ARM: exynos: Correct the help text for platform Kconfig option ARM: bcm: Select ARM_AMBA for ARCH_BRCMSTB ARM: brcmstb: Add debug UART entry for 7216 ...
-
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playgroundLinus Torvalds authored
Pull compat-ioctl fix from Arnd Bergmann: "One patch in the compat-ioctl series broke 32-bit rootfs for multiple people testing on 64-bit kernels. Let's fix it in -rc1 before others run into the same issue" * tag 'compat-ioctl-fix' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: compat_ioctl: fix FIONREAD on devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs file system parameter updates from Al Viro: "Saner fs_parser.c guts and data structures. The system-wide registry of syntax types (string/enum/int32/oct32/.../etc.) is gone and so is the horror switch() in fs_parse() that would have to grow another case every time something got added to that system-wide registry. New syntax types can be added by filesystems easily now, and their namespace is that of functions - not of system-wide enum members. IOW, they can be shared or kept private and if some turn out to be widely useful, we can make them common library helpers, etc., without having to do anything whatsoever to fs_parse() itself. And we already get that kind of requests - the thing that finally pushed me into doing that was "oh, and let's add one for timeouts - things like 15s or 2h". If some filesystem really wants that, let them do it. Without somebody having to play gatekeeper for the variants blessed by direct support in fs_parse(), TYVM. Quite a bit of boilerplate is gone. And IMO the data structures make a lot more sense now. -200LoC, while we are at it" * 'merge.nfs-fs_parse.1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (25 commits) tmpfs: switch to use of invalfc() cgroup1: switch to use of errorfc() et.al. procfs: switch to use of invalfc() hugetlbfs: switch to use of invalfc() cramfs: switch to use of errofc() et.al. gfs2: switch to use of errorfc() et.al. fuse: switch to use errorfc() et.al. ceph: use errorfc() and friends instead of spelling the prefix out prefix-handling analogues of errorf() and friends turn fs_param_is_... into functions fs_parse: handle optional arguments sanely fs_parse: fold fs_parameter_desc/fs_parameter_spec fs_parser: remove fs_parameter_description name field add prefix to fs_context->log ceph_parse_param(), ceph_parse_mon_ips(): switch to passing fc_log new primitive: __fs_parse() switch rbd and libceph to p_log-based primitives struct p_log, variants of warnf() et.al. taking that one instead teach logfc() to handle prefices, give it saner calling conventions get rid of cg_invalf() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc vfs updates from Al Viro: - bmap series from cmaiolino - getting rid of convolutions in copy_mount_options() (use a couple of copy_from_user() instead of the __get_user() crap) * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: saner copy_mount_options() fibmap: Reject negative block numbers fibmap: Use bmap instead of ->bmap method in ioctl_fibmap ecryptfs: drop direct calls to ->bmap cachefiles: drop direct usage of ->bmap method. fs: Enable bmap() function to properly return errors
-
Linus Torvalds authored
Merge thundering herd avoidance on pipe IO. This would have been applied for 5.5 already, but got delayed because of a user-space race condition in the GNU make jobserver code. Now that there's a new GNU make 4.3 release, and most distributions seem to have at least applied the (almost three year old) fix for the problem, let's see if people notice. And it might have been just bad random timing luck on my machine. If you do hit the race condition, things will still work, but the symptom is that you don't get nearly the expected parallelism when using "make -j<N>". The jobserver bug can definitely happen without this patch too, but seems to be easier to trigger when we no longer wake up pipe waiters unnecessarily. * pipe-exclusive-wakeup: pipe: use exclusive waits when reading or writing
-
Linus Torvalds authored
This makes the pipe code use separate wait-queues and exclusive waiting for readers and writers, avoiding a nasty thundering herd problem when there are lots of readers waiting for data on a pipe (or, less commonly, lots of writers waiting for a pipe to have space). While this isn't a common occurrence in the traditional "use a pipe as a data transport" case, where you typically only have a single reader and a single writer process, there is one common special case: using a pipe as a source of "locking tokens" rather than for data communication. In particular, the GNU make jobserver code ends up using a pipe as a way to limit parallelism, where each job consumes a token by reading a byte from the jobserver pipe, and releases the token by writing a byte back to the pipe. This pattern is fairly traditional on Unix, and works very well, but will waste a lot of time waking up a lot of processes when only a single reader needs to be woken up when a writer releases a new token. A simplified test-case of just this pipe interaction is to create 64 processes, and then pass a single token around between them (this test-case also intentionally passes another token that gets ignored to test the "wake up next" logic too, in case anybody wonders about it): #include <unistd.h> int main(int argc, char **argv) { int fd[2], counters[2]; pipe(fd); counters[0] = 0; counters[1] = -1; write(fd[1], counters, sizeof(counters)); /* 64 processes */ fork(); fork(); fork(); fork(); fork(); fork(); do { int i; read(fd[0], &i, sizeof(i)); if (i < 0) continue; counters[0] = i+1; write(fd[1], counters, (1+(i & 1)) *sizeof(int)); } while (counters[0] < 1000000); return 0; } and in a perfect world, passing that token around should only cause one context switch per transfer, when the writer of a token causes a directed wakeup of just a single reader. But with the "writer wakes all readers" model we traditionally had, on my test box the above case causes more than an order of magnitude more scheduling: instead of the expected ~1M context switches, "perf stat" shows 231,852.37 msec task-clock # 15.857 CPUs utilized 11,250,961 context-switches # 0.049 M/sec 616,304 cpu-migrations # 0.003 M/sec 1,648 page-faults # 0.007 K/sec 1,097,903,998,514 cycles # 4.735 GHz 120,781,778,352 instructions # 0.11 insn per cycle 27,997,056,043 branches # 120.754 M/sec 283,581,233 branch-misses # 1.01% of all branches 14.621273891 seconds time elapsed 0.018243000 seconds user 3.611468000 seconds sys before this commit. After this commit, I get 5,229.55 msec task-clock # 3.072 CPUs utilized 1,212,233 context-switches # 0.232 M/sec 103,951 cpu-migrations # 0.020 M/sec 1,328 page-faults # 0.254 K/sec 21,307,456,166 cycles # 4.074 GHz 12,947,819,999 instructions # 0.61 insn per cycle 2,881,985,678 branches # 551.096 M/sec 64,267,015 branch-misses # 2.23% of all branches 1.702148350 seconds time elapsed 0.004868000 seconds user 0.110786000 seconds sys instead. Much better. [ Note! This kernel improvement seems to be very good at triggering a race condition in the make jobserver (in GNU make 4.2.1) for me. It's a long known bug that was fixed back in June 2017 by GNU make commit b552b0525198 ("[SV 51159] Use a non-blocking read with pselect to avoid hangs."). But there wasn't a new release of GNU make until 4.3 on Jan 19 2020, so a number of distributions may still have the buggy version. Some have backported the fix to their 4.2.1 release, though, and even without the fix it's quite timing-dependent whether the bug actually is hit. ] Josh Triplett says: "I've been hammering on your pipe fix patch (switching to exclusive wait queues) for a month or so, on several different systems, and I've run into no issues with it. The patch *substantially* improves parallel build times on large (~100 CPU) systems, both with parallel make and with other things that use make's pipe-based jobserver. All current distributions (including stable and long-term stable distributions) have versions of GNU make that no longer have the jobserver bug" Tested-by:
Josh Triplett <josh@joshtriplett.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Arnd Bergmann authored
My final cleanup patch for sys_compat_ioctl() introduced a regression on the FIONREAD ioctl command, which is used for both regular and special files, but only works on regular files after my patch, as I had missed the warning that Al Viro put into a comment right above it. Change it back so it can work on any file again by moving the implementation to do_vfs_ioctl() instead. Fixes: 77b90401 ("compat_ioctl: simplify the implementation") Reported-and-tested-by:
Christian Zigotzky <chzigotzky@xenosoft.de> Reported-and-tested-by:
youling257 <youling257@gmail.com> Signed-off-by:
Arnd Bergmann <arnd@arndb.de>
-
- Feb 08, 2020
-
-
Thomas Gleixner authored
Merge tag 'irqchip-fixes-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes for 5.6, take #1 from Marc Zyngier: - Guarantee allocation of L2 vPE table for GICv4.1 - Fix GICv4.1 VPROPBASER programming - Numerous GICv4.1 tidy ups - Fix disabled GICv3 redistributor provisioning with ACPI - KConfig cleanup for C-SKY
-
Tim Harvey authored
The configuration of the OCTEONTX XCV_DLL_CTL register via xcv_init_hw() is such that the RGMII RX delay is bypassed leaving the RGMII TX delay enabled in the MAC: /* Configure DLL - enable or bypass * TX no bypass, RX bypass */ cfg = readq_relaxed(xcv->reg_base + XCV_DLL_CTL); cfg &= ~0xFF03; cfg |= CLKRX_BYP; writeq_relaxed(cfg, xcv->reg_base + XCV_DLL_CTL); This would coorespond to a interface type of PHY_INTERFACE_MODE_RGMII_RXID and not PHY_INTERFACE_MODE_RGMII. Fixing this allows RGMII PHY drivers to do the right thing (enable RX delay in the PHY) instead of erroneously enabling both delays in the PHY. Signed-off-by:
Tim Harvey <tharvey@gateworks.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'wireless-drivers-2020-02-08' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.6 First set of fixes for v5.6. Buffer overflow fixes to mwifiex, quite a few functionality fixes to iwlwifi and smaller fixes to other drivers. mwifiex * fix an unlock from a previous security fix * fix two buffer overflows libertas * fix two bugs from previous security fixes iwlwifi * fix module removal with multiple NICs * don't treat IGTK removal failure as an error * avoid FW crashes due to DTS measurement races * fix a potential use after free in FTM code * prevent a NULL pointer dereference in iwl_mvm_cfg_he_sta() * fix TDLS discovery * check all CPUs when trying to detect an error during resume rtw88 * fix clang warning mt76 * fix reading of max_nss value from a register ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Daniel Borkmann says: ==================== pull-request: bpf 2020-02-07 The following pull-request contains BPF updates for your *net* tree. We've added 15 non-merge commits during the last 10 day(s) which contain a total of 12 files changed, 114 insertions(+), 31 deletions(-). The main changes are: 1) Various BPF sockmap fixes related to RCU handling in the map's tear- down code, from Jakub Sitnicki. 2) Fix macro state explosion in BPF sk_storage map when calculating its bucket_log on allocation, from Martin KaFai Lau. 3) Fix potential BPF sockmap update race by rechecking socket's established state under lock, from Lorenz Bauer. 4) Fix crash in bpftool on missing xlated instructions when kptr_restrict sysctl is set, from Toke Høiland-Jørgensen. 5) Fix i40e's XSK wakeup code to return proper error in busy state and various misc fixes in xdpsock BPF sample code, from Maciej Fijalkowski. 6) Fix the way modifiers are skipped in BTF in the verifier while walking pointers to avoid program rejection, from Alexei Starovoitov. 7) Fix Makefile for runqslower BPF tool to i) rebuild on libbpf changes and ii) to fix undefined reference linker errors for older gcc version due to order of passed gcc parameters, from Yulia Kartseva and Song Liu. 8) Fix a trampoline_count BPF kselftest warning about missing braces around initializer, from Andrii Nakryiko. 9) Fix up redundant "HAVE" prefix from large INSN limit kernel probe in bpftool, from Michal Rostecki. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christophe Leroy authored
When CONFIG_PROVE_LOCKING is selected together with (now default) CONFIG_VMAP_STACK, kernel enter deadlock during boot. At the point of checking whether interrupts are enabled or not, the value of MSR saved on stack is read using the physical address of the stack. But at this point, when using VMAP stack the DATA MMU translation has already been re-enabled, leading to deadlock. Don't use the physical address of the stack when CONFIG_VMAP_STACK is set. Signed-off-by:
Christophe Leroy <christophe.leroy@c-s.fr> Reported-by:
Guenter Roeck <linux@roeck-us.net> Fixes: 02847487 ("powerpc/32: prepare for CONFIG_VMAP_STACK") Tested-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/daeacdc0dec0416d1c587cc9f9e7191ad3068dc0.1581095957.git.christophe.leroy@c-s.fr
-
Michael Ellerman authored
The early versions of our kernel user access prevention (KUAP) were written by Russell and Christophe, and didn't have separate read/write access. At some point I picked up the series and added the read/write access, but I failed to update the usages in futex.h to correctly allow read and write. However we didn't notice because of another bug which was causing the low-level code to always enable read and write. That bug was fixed recently in commit 1d8f739b ("powerpc/kuap: Fix set direction in allow/prevent_user_access()"). futex_atomic_cmpxchg_inatomic() is passed the user address as %3 and does: 1: lwarx %1, 0, %3 cmpw 0, %1, %4 bne- 3f 2: stwcx. %5, 0, %3 Which clearly loads and stores from/to %3. The logic in arch_futex_atomic_op_inuser() is similar, so fix both of them to use allow_read_write_user(). Without this fix, and with PPC_KUAP_DEBUG=y, we see eg: Bug: Read fault blocked by AMR! WARNING: CPU: 94 PID: 149215 at arch/powerpc/include/asm/book3s/64/kup-radix.h:126 __do_page_fault+0x600/0xf30 CPU: 94 PID: 149215 Comm: futex_requeue_p Tainted: G W 5.5.0-rc7-gcc9x-g4c25df5640ae #1 ... NIP [c000000000070680] __do_page_fault+0x600/0xf30 LR [c00000000007067c] __do_page_fault+0x5fc/0xf30 Call Trace: [c00020138e5637e0] [c00000000007067c] __do_page_fault+0x5fc/0xf30 (unreliable) [c00020138e5638c0] [c00000000000ada8] handle_page_fault+0x10/0x30 --- interrupt: 301 at cmpxchg_futex_value_locked+0x68/0xd0 LR = futex_lock_pi_atomic+0xe0/0x1f0 [c00020138e563bc0] [c000000000217b50] futex_lock_pi_atomic+0x80/0x1f0 (unreliable) [c00020138e563c30] [c00000000021b668] futex_requeue+0x438/0xb60 [c00020138e563d60] [c00000000021c6cc] do_futex+0x1ec/0x2b0 [c00020138e563d90] [c00000000021c8b8] sys_futex+0x128/0x200 [c00020138e563e20] [c00000000000b7ac] system_call+0x5c/0x68 Fixes: de78a9c4 ("powerpc: Add a framework for Kernel Userspace Access Protection") Cc: stable@vger.kernel.org # v5.2+ Reported-by:
<syzbot+e808452bad7c375cbee6@syzkaller-ppc64.appspotmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Christophe Leroy <christophe.leroy@c-s.fr> Link: https://lore.kernel.org/r/20200207122145.11928-1-mpe@ellerman.id.au
-
Zenghui Yu authored
V{PEND,PROP}BASER registers are actually located in VLPI_base frame of the *redistributor*. Rename their accessors to reflect this fact. No functional changes. Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-7-yuzenghui@huawei.com
-
Zenghui Yu authored
"ITS virtual pending table not cleaning" is already complained inside its_clear_vpend_valid(), there's no need to trigger a WARN_ON again. Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-6-yuzenghui@huawei.com
-
Zenghui Yu authored
The variable 'tmp' in inherit_vpe_l1_table_from_rd() is actually not needed, drop it. Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-5-yuzenghui@huawei.com
-
Zenghui Yu authored
In GICv4, we will ensure that level2 vPE table memory is allocated for the specified vpe_id on all v4 ITS, in its_alloc_vpe_table(). This still works well for the typical GICv4.1 implementation, where the new vPE table is shared between the ITSs and the RDs. To make it explicit, let us introduce allocate_vpe_l2_table() to make sure that the L2 tables are allocated on all v4.1 RDs. We're likely not need to allocate memory in it because the vPE table is shared and (L2 table is) already allocated at ITS level, except for the case where the ITS doesn't share anything (say SVPET == 0, practically unlikely but architecturally allowed). The implementation of allocate_vpe_l2_table() is mostly copied from its_alloc_table_entry(). Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-4-yuzenghui@huawei.com
-
Zenghui Yu authored
Currently, we will not set vpe_l1_page for the current RD if we can inherit the vPE configuration table from another RD (or ITS), which results in an inconsistency between RDs within the same CommonLPIAff group. Let's rename it to vpe_l1_base to indicate the base address of the vPE configuration table of this RD, and set it properly for *all* v4.1 redistributors. Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-3-yuzenghui@huawei.com
-
Zenghui Yu authored
The Size field of GICv4.1 VPROPBASER register indicates number of pages minus one and together Page_Size and Size control the vPEID width. Let's respect this requirement of the architecture. Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200206075711.1275-2-yuzenghui@huawei.com
-
Lorenzo Bianconi authored
Fix u8 cast reading max_nss from MT_TOP_STRAP_STA register in mt7615_eeprom_parse_hw_cap routine Fixes: acf5457f ("mt76: mt7615: read {tx,rx} mask from eeprom") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuseLinus Torvalds authored
Pull fuse fixes from Miklos Szeredi: - Fix a regression introduced in v5.1 that triggers WARNINGs for some fuse filesystems - Fix an xfstest failure - Allow overlayfs to be used on top of fuse/virtiofs - Code and documentation cleanups * tag 'fuse-fixes-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: use true,false for bool variable Documentation: filesystems: convert fuse to RST fuse: Support RENAME_WHITEOUT flag fuse: don't overflow LLONG_MAX with end offset fix up iter on short count in fuse_direct_io()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 fixes from Andreas Gruenbacher: - Fix a bug in Abhi Das's journal head lookup improvements that can cause a valid journal to be rejected. - Fix an O_SYNC write handling bug reported by Christoph Hellwig. * tag 'gfs2-for-5.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: fix O_SYNC write handling gfs2: move setting current->backing_dev_info gfs2: fix gfs2_find_jhead that returns uninitialized jhead with seq 0
-
git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linuxLinus Torvalds authored
Pull orangefs fix from Mike Marshall: "Debugfs fix for orangefs. Vasliy Averin noticed that 'if seq_file .next function does not change position index, read after some lseek can generate unexpected output' and sent in this fix" * tag 'for-linus-5.6-ofs1' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux: help_next should increase position index
-
git://linux-nfs.org/~bfields/linuxLinus Torvalds authored
Pull nfsd updates from Bruce Fields: "Highlights: - Server-to-server copy code from Olga. To use it, client and both servers must have support, the target server must be able to access the source server over NFSv4.2, and the target server must have the inter_copy_offload_enable module parameter set. - Improvements and bugfixes for the new filehandle cache, especially in the container case, from Trond - Also from Trond, better reporting of write errors. - Y2038 work from Arnd" * tag 'nfsd-5.6' of git://linux-nfs.org/~bfields/linux: (55 commits) sunrpc: expiry_time should be seconds not timeval nfsd: make nfsd_filecache_wq variable static nfsd4: fix double free in nfsd4_do_async_copy() nfsd: convert file cache to use over/underflow safe refcount nfsd: Define the file access mode enum for tracing nfsd: Fix a perf warning nfsd: Ensure sampling of the write verifier is atomic with the write nfsd: Ensure sampling of the commit verifier is atomic with the commit sunrpc: clean up cache entry add/remove from hashtable sunrpc: Fix potential leaks in sunrpc_cache_unhash() nfsd: Ensure exclusion between CLONE and WRITE errors nfsd: Pass the nfsd_file as arguments to nfsd4_clone_file_range() nfsd: Update the boot verifier on stable writes too. nfsd: Fix stable writes nfsd: Allow nfsd_vfs_write() to take the nfsd_file as an argument nfsd: Fix a soft lockup race in nfsd_file_mark_find_or_create() nfsd: Reduce the number of calls to nfsd_file_gc() nfsd: Schedule the laundrette regularly irrespective of file errors nfsd: Remove unused constant NFSD_FILE_LRU_RESCAN nfsd: Containerise filecache laundrette ...
-
git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds authored
Puyll NFS client updates from Anna Schumaker: "Stable bugfixes: - Fix memory leaks and corruption in readdir # v2.6.37+ - Directory page cache needs to be locked when read # v2.6.37+ New features: - Convert NFS to use the new mount API - Add "softreval" mount option to let clients use cache if server goes down - Add a config option to compile without UDP support - Limit the number of inactive delegations the client can cache at once - Improved readdir concurrency using iterate_shared() Other bugfixes and cleanups: - More 64-bit time conversions - Add additional diagnostic tracepoints - Check for holes in swapfiles, and add dependency on CONFIG_SWAP - Various xprtrdma cleanups to prepare for 5.7's changes - Several fixes for NFS writeback and commit handling - Fix acls over krb5i/krb5p mounts - Recover from premature loss of openstateids - Fix NFS v3 chacl and chmod bug - Compare creds using cred_fscmp() - Use kmemdup_nul() in more places - Optimize readdir cache page invalidation - Lease renewal and recovery fixes" * tag 'nfs-for-5.6-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (93 commits) NFSv4.0: nfs4_do_fsinfo() should not do implicit lease renewals NFSv4: try lease recovery on NFS4ERR_EXPIRED NFS: Fix memory leaks nfs: optimise readdir cache page invalidation NFS: Switch readdir to using iterate_shared() NFS: Use kmemdup_nul() in nfs_readdir_make_qstr() NFS: Directory page cache pages need to be locked when read NFS: Fix memory leaks and corruption in readdir SUNRPC: Use kmemdup_nul() in rpc_parse_scope_id() NFS: Replace various occurrences of kstrndup() with kmemdup_nul() NFSv4: Limit the total number of cached delegations NFSv4: Add accounting for the number of active delegations held NFSv4: Try to return the delegation immediately when marked for return on close NFS: Clear NFS_DELEGATION_RETURN_IF_CLOSED when the delegation is returned NFSv4: nfs_inode_evict_delegation() should set NFS_DELEGATION_RETURNING NFS: nfs_find_open_context() should use cred_fscmp() NFS: nfs_access_get_cached_rcu() should use cred_fscmp() NFSv4: pnfs_roc() must use cred_fscmp() to compare creds NFS: remove unused macros nfs: Return EINVAL rather than ERANGE for mount parse errors ...
-
Martin KaFai Lau authored
It was reported that the max_t, ilog2, and roundup_pow_of_two macros have exponential effects on the number of states in the sparse checker. This patch breaks them up by calculating the "nbuckets" first so that the "bucket_log" only needs to take ilog2(). In addition, Linus mentioned: Patch looks good, but I'd like to point out that it's not just sparse. You can see it with a simple make net/core/bpf_sk_storage.i grep 'smap->bucket_log = ' net/core/bpf_sk_storage.i | wc and see the end result: 1 365071 2686974 That's one line (the assignment line) that is 2,686,974 characters in length. Now, sparse does happen to react particularly badly to that (I didn't look to why, but I suspect it's just that evaluating all the types that don't actually ever end up getting used ends up being much more expensive than it should be), but I bet it's not good for gcc either. Fixes: 6ac99e8f ("bpf: Introduce bpf sk local storage") Reported-by:
Randy Dunlap <rdunlap@infradead.org> Reported-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Suggested-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Reviewed-by:
Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Link: https://lore.kernel.org/bpf/20200207081810.3918919-1-kafai@fb.com
-
Jakub Sitnicki authored
Commit 7e81a353 ("bpf: Sockmap, ensure sock lock held during tear down") introduced sleeping issues inside RCU critical sections and while holding a spinlock on sockmap/sockhash tear-down. There has to be at least one socket in the map for the problem to surface. This adds a test that triggers the warnings for broken locking rules. Not a fix per se, but rather tooling to verify the accompanying fixes. Run on a VM with 1 vCPU to reproduce the warnings. Fixes: 7e81a353 ("bpf: Sockmap, ensure sock lock held during tear down") Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200206111652.694507-4-jakub@cloudflare.com
-
Jakub Sitnicki authored
We need to have a synchronize_rcu before free'ing the sockhash because any outstanding psock references will have a pointer to the map and when they use it, this could trigger a use after free. This is a sister fix for sockhash, following commit 2bb90e5c ("bpf: sockmap, synchronize_rcu before free'ing map") which addressed sockmap, which comes from a manual audit. Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200206111652.694507-3-jakub@cloudflare.com
-
Jakub Sitnicki authored
rcu_read_lock is needed to protect access to psock inside sock_map_unref when tearing down the map. However, we can't afford to sleep in lock_sock while in RCU read-side critical section. Grab the RCU lock only after we have locked the socket. This fixes RCU warnings triggerable on a VM with 1 vCPU when free'ing a sockmap/sockhash that contains at least one socket: | ============================= | WARNING: suspicious RCU usage | 5.5.0-04005-g8fc91b972b73 #450 Not tainted | ----------------------------- | include/linux/rcupdate.h:272 Illegal context switch in RCU read-side critical section! | | other info that might help us debug this: | | | rcu_scheduler_active = 2, debug_locks = 1 | 4 locks held by kworker/0:1/62: | #0: ffff88813b019748 ((wq_completion)events){+.+.}, at: process_one_work+0x1d7/0x5e0 | #1: ffffc900000abe50 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x1d7/0x5e0 | #2: ffffffff82065d20 (rcu_read_lock){....}, at: sock_map_free+0x5/0x170 | #3: ffff8881368c5df8 (&stab->lock){+...}, at: sock_map_free+0x64/0x170 | | stack backtrace: | CPU: 0 PID: 62 Comm: kworker/0:1 Not tainted 5.5.0-04005-g8fc91b972b73 #450 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 | Workqueue: events bpf_map_free_deferred | Call Trace: | dump_stack+0x71/0xa0 | ___might_sleep+0x105/0x190 | lock_sock_nested+0x28/0x90 | sock_map_free+0x95/0x170 | bpf_map_free_deferred+0x58/0x80 | process_one_work+0x260/0x5e0 | worker_thread+0x4d/0x3e0 | kthread+0x108/0x140 | ? process_one_work+0x5e0/0x5e0 | ? kthread_park+0x90/0x90 | ret_from_fork+0x3a/0x50 | ============================= | WARNING: suspicious RCU usage | 5.5.0-04005-g8fc91b972b73-dirty #452 Not tainted | ----------------------------- | include/linux/rcupdate.h:272 Illegal context switch in RCU read-side critical section! | | other info that might help us debug this: | | | rcu_scheduler_active = 2, debug_locks = 1 | 4 locks held by kworker/0:1/62: | #0: ffff88813b019748 ((wq_completion)events){+.+.}, at: process_one_work+0x1d7/0x5e0 | #1: ffffc900000abe50 ((work_completion)(&map->work)){+.+.}, at: process_one_work+0x1d7/0x5e0 | #2: ffffffff82065d20 (rcu_read_lock){....}, at: sock_hash_free+0x5/0x1d0 | #3: ffff888139966e00 (&htab->buckets[i].lock){+...}, at: sock_hash_free+0x92/0x1d0 | | stack backtrace: | CPU: 0 PID: 62 Comm: kworker/0:1 Not tainted 5.5.0-04005-g8fc91b972b73-dirty #452 | Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20190727_073836-buildvm-ppc64le-16.ppc.fedoraproject.org-3.fc31 04/01/2014 | Workqueue: events bpf_map_free_deferred | Call Trace: | dump_stack+0x71/0xa0 | ___might_sleep+0x105/0x190 | lock_sock_nested+0x28/0x90 | sock_hash_free+0xec/0x1d0 | bpf_map_free_deferred+0x58/0x80 | process_one_work+0x260/0x5e0 | worker_thread+0x4d/0x3e0 | kthread+0x108/0x140 | ? process_one_work+0x5e0/0x5e0 | ? kthread_park+0x90/0x90 | ret_from_fork+0x3a/0x50 Fixes: 7e81a353 ("bpf: Sockmap, ensure sock lock held during tear down") Signed-off-by:
Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20200206111652.694507-2-jakub@cloudflare.com
-