- Jul 15, 2020
-
-
Laurence Oberman authored
This is likely firmware causing this but its starting to annoy customers. Change the message level to verbose to prevent the spam. Note that this seems to only show up with ISCSI enabled on the HBA via the qedi driver. Signed-off-by:
Laurence Oberman <loberman@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Pisati authored
During setup(): ... for ns in h0 r1 h1 h2 h3 do create_ns ${ns} done ... while in cleanup(): ... for n in h1 r1 h2 h3 h4 do ip netns del ${n} 2>/dev/null done ... and after removing the stderr redirection in cleanup(): $ sudo ./fib_nexthop_multiprefix.sh ... TEST: IPv4: host 0 to host 3, mtu 1400 [ OK ] TEST: IPv6: host 0 to host 3, mtu 1400 [ OK ] Cannot remove namespace file "/run/netns/h4": No such file or directory $ echo $? 1 and a non-zero return code, make kselftests fail (even if the test itself is fine): ... not ok 34 selftests: net: fib_nexthop_multiprefix.sh # exit=1 ... Signed-off-by:
Paolo Pisati <paolo.pisati@canonical.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Maxim Kochetkov authored
If there is no valid MAC address in the device tree, use a random MAC address. Signed-off-by:
Maxim Kochetkov <fido_max@inbox.ru> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Christophe JAILLET authored
The size used when calling 'pci_alloc_consistent()' and 'pci_free_consistent()' should match. Fix it and have it consistent with the corresponding call in 'rr_close()'. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jul 14, 2020
-
-
David S. Miller authored
Merge tag 'wireless-drivers-2020-07-13' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers Kalle Valo says: ==================== wireless-drivers fixes for v5.8 First set of fixes for v5.8. Various important fixes for iwlwifi and mt76. iwlwifi * fix sleeping under RCU * fix a kernel crash when using compressed firmware images mt76 * tx queueing fixes for mt7615/22/63 * locking fix * fix a crash during watchdog reset * fix memory leaks ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Wei Yongjun authored
KASAN report null-ptr-deref error when register_netdev() failed: KASAN: null-ptr-deref in range [0x00000000000003c0-0x00000000000003c7] CPU: 2 PID: 422 Comm: ip Not tainted 5.8.0-rc4+ #12 Call Trace: ip6gre_init_net+0x4ab/0x580 ? ip6gre_tunnel_uninit+0x3f0/0x3f0 ops_init+0xa8/0x3c0 setup_net+0x2de/0x7e0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? ops_init+0x3c0/0x3c0 ? kasan_unpoison_shadow+0x33/0x40 ? __kasan_kmalloc.constprop.0+0xc2/0xd0 copy_net_ns+0x27d/0x530 create_new_namespaces+0x382/0xa30 unshare_nsproxy_namespaces+0xa1/0x1d0 ksys_unshare+0x39c/0x780 ? walk_process_tree+0x2a0/0x2a0 ? trace_hardirqs_on+0x4a/0x1b0 ? _raw_spin_unlock_irq+0x1f/0x30 ? syscall_trace_enter+0x1a7/0x330 ? do_syscall_64+0x1c/0xa0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x56/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ip6gre_tunnel_uninit() has set 'ign->fb_tunnel_dev' to NULL, later access to ign->fb_tunnel_dev cause null-ptr-deref. Fix it by saving 'ign->fb_tunnel_dev' to local variable ndev. Fixes: dafabb65 ("ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Geert Uytterhoeven authored
On sparc32, tcflag_t is "unsigned long", unlike on all other architectures, where it is "unsigned int": drivers/net/usb/hso.c: In function ‘hso_serial_set_termios’: include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 4 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=] drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’ hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n", ^~~~~~~ include/linux/kern_levels.h:5:18: warning: format ‘%d’ expects argument of type ‘unsigned int’, but argument 5 has type ‘tcflag_t {aka long unsigned int}’ [-Wformat=] drivers/net/usb/hso.c:1393:3: note: in expansion of macro ‘hso_dbg’ hso_dbg(0x16, "Termios called with: cflags new[%d] - old[%d]\n", ^~~~~~~ As "unsigned long" is 32-bit on sparc32, fix this by casting all tcflag_t parameters to "unsigned int". While at it, use "%u" to format unsigned numbers. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jul 13, 2020
-
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: 3 bug fixes. 2 Fixes related to PHY/link settings. The last one fixes the sizing of the completion ring. Please also queue for -stable. Thanks. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The current completion ring sizing formula is wrong with TPA enabled. The formula assumes that the number of TPA completions are bound by the RX ring size, but that's not true. TPA_START completions are immediately recycled so they are not bound by the RX ring size. We must add bp->max_tpa to the worst case maximum RX and TPA completions. The completion ring can overflow because of this mistake. This will cause hardware to disable the completion ring when this happens, leading to RX and TX traffic to stall on that ring. This issue is generally exposed only when the RX ring size is set very small. Fix the formula by adding bp->max_tpa to the number of RX completions if TPA is enabled. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver."); Reviewed-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
In a shared port PHY configuration, async event is received when any of the port modifies the configuration. Ethtool link settings should be initialised after updated PHY configuration from firmware. Fixes: b1613e78 ("bnxt_en: Add async. event logic for PHY configuration changes.") Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
The driver was modified to not rely on rtnl lock to protect link settings about 2 years ago. The pause setting was missed when making that change. Fix it by acquiring link_lock mutex before calling bnxt_hwrm_set_pause(). Fixes: e2dc9b6e ("bnxt_en: Don't use rtnl lock to protect link change logic in workqueue.") Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jul 11, 2020
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimmLinus Torvalds authored
Pull libnvdimm fix from Dan Williams: "A one-line Fix for key ring search permissions to address a regression from -rc1" * tag 'libnvdimm-fix-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: libnvdimm/security: Fix key lookup permissions
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Four cifs/smb3 fixes: the three for stable fix problems found recently with change notification including a reference count leak" * tag '5.8-rc4-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: update internal module version number cifs: fix reference leak for tlink smb3: fix unneeded error message on change notify cifs: remove the retry in cifs_poxis_lock_set smb3: fix access denied on change notify request to some servers
-
git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linuxLinus Torvalds authored
Pull coding style terminology documentation from Dan Williams: "The discussion has tapered off as well as the incoming ack, review, and sign-off tags. I did not see a reason to wait for the next merge window" * tag 'inclusive-terminology' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/linux: CodingStyle: Inclusive Terminology
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking BPF programs, from Maciej Żenczykowski. 2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu Mariappan. 3) Slay memory leak in nl80211 bss color attribute parsing code, from Luca Coelho. 4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin. 5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric Dumazet. 6) xsk code dips too deeply into DMA mapping implementation internals. Add dma_need_sync and use it. From Christoph Hellwig 7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko. 8) Check for disallowed attributes when loading flow dissector BPF programs. From Lorenz Bauer. 9) Correct packet injection to L3 tunnel devices via AF_PACKET, from Jason A. Donenfeld. 10) Don't advertise checksum offload on ipa devices that don't support it. From Alex Elder. 11) Resolve several issues in TCP MD5 signature support. Missing memory barriers, bogus options emitted when using syncookies, and failure to allow md5 key changes in established states. All from Eric Dumazet. 12) Fix interface leak in hsr code, from Taehee Yoo. 13) VF reset fixes in hns3 driver, from Huazhong Tan. 14) Make loopback work again with ipv6 anycast, from David Ahern. 15) Fix TX starvation under high load in fec driver, from Tobias Waldekranz. 16) MLD2 payload lengths not checked properly in bridge multicast code, from Linus Lüssing. 17) Packet scheduler code that wants to find the inner protocol currently only works for one level of VLAN encapsulation. Allow Q-in-Q situations to work properly here, from Toke Høiland-Jørgensen. 18) Fix route leak in l2tp, from Xin Long. 19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport support and various protocols. From Martin KaFai Lau. 20) Fix socket cgroup v2 reference counting in some situations, from Cong Wang. 21) Cure memory leak in mlx5 connection tracking offload support, from Eli Britstein. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits) mlxsw: pci: Fix use-after-free in case of failed devlink reload mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON() net: macb: fix call to pm_runtime in the suspend/resume functions net: macb: fix macb_suspend() by removing call to netif_carrier_off() net: macb: fix macb_get/set_wol() when moving to phylink net: macb: mark device wake capable when "magic-packet" property present net: macb: fix wakeup test in runtime suspend/resume routines bnxt_en: fix NULL dereference in case SR-IOV configuration fails libbpf: Fix libbpf hashmap on (I)LP32 architectures net/mlx5e: CT: Fix memory leak in cleanup net/mlx5e: Fix port buffers cell size value net/mlx5e: Fix 50G per lane indication net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash net/mlx5e: Fix VXLAN configuration restore after function reload net/mlx5e: Fix usage of rcu-protected pointer net/mxl5e: Verify that rpriv is not NULL net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode net/mlx5: Fix eeprom support for SFP module cgroup: Fix sock_cgroup_data on big-endian. selftests: bpf: Fix detach from sockmap tests ...
-
Nathan Chancellor authored
CONFIG_CC_IS_GCC is undefined when Clang is used, which breaks the build (see our Travis link below). Clang 8 was chosen as a minimum version for this check because there were some improvements around __builtin_constant_p in that release. In reality, MIPS was not even buildable until clang 9 so that check was not technically necessary. Just remove all compiler checks and just assume that we have a working compiler. Fixes: d4e60453 ("Restore gcc check in mips asm/unroll.h") Link: https://travis-ci.com/github/ClangBuiltLinux/continuous-integration/jobs/359642821 Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: Various fixes Fix two issues found by syzkaller. Patch #1 removes inappropriate usage of WARN_ON() following memory allocation failure. Constantly triggered when syzkaller injects faults. Patch #2 fixes a use-after-free that can be triggered by 'devlink dev info' following a failed devlink reload. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
In case devlink reload failed, it is possible to trigger a use-after-free when querying the kernel for device info via 'devlink dev info' [1]. This happens because as part of the reload error path the PCI command interface is de-initialized and its mailboxes are freed. When the devlink '->info_get()' callback is invoked the device is queried via the command interface and the freed mailboxes are accessed. Fix this by initializing the command interface once during probe and not during every reload. This is consistent with the other bus used by mlxsw (i.e., 'mlxsw_i2c') and also allows user space to query the running firmware version (for example) from the device after a failed reload. [1] BUG: KASAN: use-after-free in memcpy include/linux/string.h:406 [inline] BUG: KASAN: use-after-free in mlxsw_pci_cmd_exec+0x177/0xa60 drivers/net/ethernet/mellanox/mlxsw/pci.c:1675 Write of size 4096 at addr ffff88810ae32000 by task syz-executor.1/2355 CPU: 1 PID: 2355 Comm: syz-executor.1 Not tainted 5.8.0-rc2+ #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x14e/0x1b0 mm/kasan/generic.c:192 memcpy+0x39/0x60 mm/kasan/common.c:106 memcpy include/linux/string.h:406 [inline] mlxsw_pci_cmd_exec+0x177/0xa60 drivers/net/ethernet/mellanox/mlxsw/pci.c:1675 mlxsw_cmd_exec+0x249/0x550 drivers/net/ethernet/mellanox/mlxsw/core.c:2335 mlxsw_cmd_access_reg drivers/net/ethernet/mellanox/mlxsw/cmd.h:859 [inline] mlxsw_core_reg_access_cmd drivers/net/ethernet/mellanox/mlxsw/core.c:1938 [inline] mlxsw_core_reg_access+0x2f6/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1985 mlxsw_reg_query drivers/net/ethernet/mellanox/mlxsw/core.c:2000 [inline] mlxsw_devlink_info_get+0x17f/0x6e0 drivers/net/ethernet/mellanox/mlxsw/core.c:1090 devlink_nl_info_fill.constprop.0+0x13c/0x2d0 net/core/devlink.c:4588 devlink_nl_cmd_info_get_dumpit+0x246/0x460 net/core/devlink.c:4648 genl_lock_dumpit+0x85/0xc0 net/netlink/genetlink.c:575 netlink_dump+0x515/0xe50 net/netlink/af_netlink.c:2245 __netlink_dump_start+0x53d/0x830 net/netlink/af_netlink.c:2353 genl_family_rcv_msg_dumpit.isra.0+0x296/0x300 net/netlink/genetlink.c:638 genl_family_rcv_msg net/netlink/genetlink.c:733 [inline] genl_rcv_msg+0x78d/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: a9c8336f ("mlxsw: core: Add support for devlink info command") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
We should not trigger a warning when a memory allocation fails. Remove the WARN_ON(). The warning is constantly triggered by syzkaller when it is injecting faults: [ 2230.758664] FAULT_INJECTION: forcing a failure. [ 2230.758664] name failslab, interval 1, probability 0, space 0, times 0 [ 2230.762329] CPU: 3 PID: 1407 Comm: syz-executor.0 Not tainted 5.8.0-rc2+ #28 ... [ 2230.898175] WARNING: CPU: 3 PID: 1407 at drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:6265 mlxsw_sp_router_fib_event+0xfad/0x13e0 [ 2230.898179] Kernel panic - not syncing: panic_on_warn set ... [ 2230.898183] CPU: 3 PID: 1407 Comm: syz-executor.0 Not tainted 5.8.0-rc2+ #28 [ 2230.898190] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Fixes: 3057224e ("mlxsw: spectrum_router: Implement FIB offload in deferred work") Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Reviewed-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Nicolas Ferre says: ==================== net: macb: Wake-on-Lan magic packet fixes and GEM handling Here is a split series to fix WoL magic-packet on the current macb driver. Only fixes in this one based on current net/master. Changes in v5: - Addressed the error code returned by phylink_ethtool_set_wol() as suggested by Russell. If PHY handles WoL, MAC doesn't stay in the way. - Removed Florian's tag on 3/5 because of the above changes. - Correct the "Fixes" tag on 1/5. Changes in v4: - Pure bug fix series for 'net'. GEM addition and MACB update removed: will be sent later. Changes in v3: - Revert some of the v2 changes done in macb_resume(). Now the resume function supports in-depth re-configuration of the controller in order to deal with deeper sleep states. Basically as it was before changes introduced by this series - Tested for non-regression with our deeper Power Management mode which cuts power to the controller completely Changes in v2: - Add patch 4/7 ("net: macb: fix macb_suspend() by removing call to netif_carrier_off()") needed for keeping phy state consistent - Add patch 5/7 ("net: macb: fix call to pm_runtime in the suspend/resume functions") that prevent putting the macb in runtime pm suspend mode when WoL is used - Collect review tags on 3 first patches from Florian: Thanks! - Review of macb_resume() function - Addition of pm_wakeup_event() in both MACB and GEM WoL IRQ handlers ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Ferre authored
The calls to pm_runtime_force_suspend/resume() functions are only relevant if the device is not configured to act as a WoL wakeup source. Add the device_may_wakeup() test before calling them. Fixes: 3e2a5e15 ("net: macb: add wake-on-lan support via magic packet") Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Harini Katakam <harini.katakam@xilinx.com> Cc: Sergio Prado <sergio.prado@e-labworks.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Ferre authored
As we now use the phylink call to phylink_stop() in the non-WoL path, there is no need for this call to netif_carrier_off() anymore. It can disturb the underlying phylink FSM. Fixes: 7897b071 ("net: macb: convert to phylink") Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Harini Katakam <harini.katakam@xilinx.com> Cc: Antoine Tenart <antoine.tenart@bootlin.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Ferre authored
Keep previous function goals and integrate phylink actions to them. phylink_ethtool_get_wol() is not enough to figure out if Ethernet driver supports Wake-on-Lan. Initialization of "supported" and "wolopts" members is done in phylink function, no need to keep them in calling function. phylink_ethtool_set_wol() return value is considered and determines if the MAC has to handle WoL or not. The case where the PHY doesn't implement WoL leads to the MAC configuring it to provide this feature. Fixes: 7897b071 ("net: macb: convert to phylink") Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Harini Katakam <harini.katakam@xilinx.com> Cc: Antoine Tenart <antoine.tenart@bootlin.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Ferre authored
Change the way the "magic-packet" DT property is handled in the macb_probe() function, matching DT binding documentation. Now we mark the device as "wakeup capable" instead of calling the device_init_wakeup() function that would enable the wakeup source. For Ethernet WoL, enabling the wakeup_source is done by using ethtool and associated macb_set_wol() function that already calls device_set_wakeup_enable() for this purpose. That would reduce power consumption by cutting more clocks if "magic-packet" property is set but WoL is not configured by ethtool. Fixes: 3e2a5e15 ("net: macb: add wake-on-lan support via magic packet") Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Harini Katakam <harini.katakam@xilinx.com> Cc: Sergio Prado <sergio.prado@e-labworks.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Ferre authored
Use the proper struct device pointer to check if the wakeup flag and wakeup source are positioned. Use the one passed by function call which is equivalent to &bp->dev->dev.parent. It's preventing the trigger of a spurious interrupt in case the Wake-on-Lan feature is used. Fixes: d54f89af ("net: macb: Add pm runtime support") Cc: Claudiu Beznea <claudiu.beznea@microchip.com> Cc: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Davide Caratti authored
we need to set 'active_vfs' back to 0, if something goes wrong during the allocation of SR-IOV resources: otherwise, further VF configurations will wrongly assume that bp->pf.vf[x] are valid memory locations, and commands like the ones in the following sequence: # echo 2 >/sys/bus/pci/devices/${ADDR}/sriov_numvfs # ip link set dev ens1f0np0 up # ip link set dev ens1f0np0 vf 0 trust on will cause a kernel crash similar to this: bnxt_en 0000:3b:00.0: not enough MMIO resources for SR-IOV BUG: kernel NULL pointer dereference, address: 0000000000000014 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 43 PID: 2059 Comm: ip Tainted: G I 5.8.0-rc2.upstream+ #871 Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 2.2.11 06/13/2019 RIP: 0010:bnxt_set_vf_trust+0x5b/0x110 [bnxt_en] Code: 44 24 58 31 c0 e8 f5 fb ff ff 85 c0 0f 85 b6 00 00 00 48 8d 1c 5b 41 89 c6 b9 0b 00 00 00 48 c1 e3 04 49 03 9c 24 f0 0e 00 00 <8b> 43 14 89 c2 83 c8 10 83 e2 ef 45 84 ed 49 89 e5 0f 44 c2 4c 89 RSP: 0018:ffffac6246a1f570 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 000000000000000b RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffff98b28f538900 RBP: ffff98b28f538900 R08: 0000000000000000 R09: 0000000000000008 R10: ffffffffb9515be0 R11: ffffac6246a1f678 R12: ffff98b28f538000 R13: 0000000000000001 R14: 0000000000000000 R15: ffffffffc05451e0 FS: 00007fde0f688800(0000) GS:ffff98baffd40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000014 CR3: 000000104bb0a003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: do_setlink+0x994/0xfe0 __rtnl_newlink+0x544/0x8d0 rtnl_newlink+0x47/0x70 rtnetlink_rcv_msg+0x29f/0x350 netlink_rcv_skb+0x4a/0x110 netlink_unicast+0x21d/0x300 netlink_sendmsg+0x329/0x450 sock_sendmsg+0x5b/0x60 ____sys_sendmsg+0x204/0x280 ___sys_sendmsg+0x88/0xd0 __sys_sendmsg+0x5e/0xa0 do_syscall_64+0x47/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Reported-by:
Fei Liu <feliu@redhat.com> CC: Jonathan Toppins <jtoppins@redhat.com> CC: Michael Chan <michael.chan@broadcom.com> Signed-off-by:
Davide Caratti <dcaratti@redhat.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Acked-by:
Jonathan Toppins <jtoppins@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2020-07-09 The following pull-request contains BPF updates for your *net* tree. We've added 4 non-merge commits during the last 1 day(s) which contain a total of 4 files changed, 26 insertions(+), 15 deletions(-). The main changes are: 1) fix crash in libbpf on 32-bit archs, from Jakub and Andrii. 2) fix crash when l2tp and bpf_sk_reuseport conflict, from Martin. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxDavid S. Miller authored
Saeed Mahameed says: ==================== mlx5 fixes 2020-07-02 This series introduces some fixes to mlx5 driver. V1->v2: - Drop "ip -s" patch and mirred device hold reference patch. - Will revise them in a later submission. Please pull and let me know if there is any problem. For -stable v5.2 ('net/mlx5: Fix eeprom support for SFP module') For -stable v5.4 ('net/mlx5e: Fix 50G per lane indication') For -stable v5.5 ('net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash') ('net/mlx5e: Fix VXLAN configuration restore after function reload') For -stable v5.7 ('net/mlx5e: CT: Fix memory leak in cleanup') ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "Small update, a few more merge window bugs and normal driver bug fixes: - Two merge window regressions in mlx5: a error path bug found by syzkaller and some lost code during a rework preventing ipoib from working in some configurations - Silence clang compilation warning in OPA related code - Fix a long standing race condition in ib_nl for ACM - Resolve when the HFI1 is shutdown" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/mlx5: Set PD pointers for the error flow unwind IB/mlx5: Fix 50G per lane indication RDMA/siw: Fix reporting vendor_part_id IB/sa: Resolv use-after-free in ib_nl_make_request() IB/hfi1: Do not destroy link_wq when the device is shut down IB/hfi1: Do not destroy hfi1_wq when the device is shut down RDMA/mlx5: Fix legacy IPoIB QP initialization IB/hfi1: Add explicit cast OPA_MTU_8192 to 'enum ib_mtu'
-
Linus Torvalds authored
Merge tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "TPM2 test changes to run on python3 and kselftest framework fix to incorrect return type" * tag 'linux-kselftest-fixes-5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kselftest: ksft_test_num return type should be unsigned selftests: tpm: upgrade TPM2 tests from Python 2 to Python 3
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: - Fix memleak for error path in registered files (Yang) - Export CQ overflow state in flags, necessary to fix a case where liburing doesn't know if it needs to enter the kernel (Xiaoguang) - Fix for a regression in when user memory is accounted freed, causing issues with back-to-back ring exit + init if the ulimit -l setting is very tight. * tag 'io_uring-5.8-2020-07-10' of git://git.kernel.dk/linux-block: io_uring: account user memory freed when exit has been queued io_uring: fix memleak in io_sqe_files_register() io_uring: fix memleak in __io_sqe_files_update() io_uring: export cq overflow status to userspace
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - Fix for inflight accounting, which affects only dm (Ming) - Fix documentation error for bfq (Yufen) - Fix memory leak for nbd (Zheng) * tag 'block-5.8-2020-07-10' of git://git.kernel.dk/linux-block: nbd: Fix memory leak in nbd_add_socket blk-mq: consider non-idle request as "inflight" in blk_mq_rq_inflight() docs: block: update and fix tiny error for bfq
-
git://git.infradead.org/users/hch/miscLinus Torvalds authored
Pull in-kernel read and write op cleanups from Christoph Hellwig: "Cleanup in-kernel read and write operations Reshuffle the (__)kernel_read and (__)kernel_write helpers, and ensure all users of in-kernel file I/O use them if they don't use iov_iter based methods already. The new WARN_ONs in combination with syzcaller already found a missing input validation in 9p. The fix should be on your way through the maintainer ASAP". [ This is prep-work for the real changes coming 5.9 ] * tag 'cleanup-kernel_read_write' of git://git.infradead.org/users/hch/misc: fs: remove __vfs_read fs: implement kernel_read using __kernel_read integrity/ima: switch to using __kernel_read fs: add a __kernel_read helper fs: remove __vfs_write fs: implement kernel_write using __kernel_write fs: check FMODE_WRITE in __kernel_write fs: unexport __kernel_write bpfilter: switch to kernel_write autofs: switch to kernel_write cachefiles: switch to kernel_write
-
git://git.infradead.org/users/hch/dma-mappingLinus Torvalds authored
Pull dma-mapping fixes from Christoph Hellwig: - add a warning when the atomic pool is depleted (David Rientjes) - protect the parameters of the new scatterlist helper macros (Marek Szyprowski ) * tag 'dma-mapping-5.8-5' of git://git.infradead.org/users/hch/dma-mapping: scatterlist: protect parameters of the sg_table related macros dma-mapping: warn when coherent pool is depleted
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlLinus Torvalds authored
Pull pin control fixes from Linus Walleij: - Fix an issue in the AMD driver for the UART0 group - Fix a glitch issue in the Baytrail pin controller * tag 'pinctrl-v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: baytrail: Fix pin being driven low for a while on gpiod_get(..., GPIOD_OUT_HIGH) pinctrl: amd: fix npins for uart0 in kerncz_groups
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Some GPIO fixes, most of them for the PCA953x that Andy worked hard to fix up. - Fix two runtime PM errorpath problems in the Arizona GPIO driver. - Fix three interrupt issues in the PCA953x driver. - Fix the automatic address increment handling in the PCA953x driver again. - Add a quirk to the PCA953x that fixes a problem in the Intel Galileo Gen 2" * tag 'gpio-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: pca953x: Fix GPIO resource leak on Intel Galileo Gen 2 gpio: pca953x: disable regmap locking for automatic address incrementing gpio: pca953x: Fix direction setting when configure an IRQ gpio: pca953x: Override IRQ for one of the expanders on Galileo Gen 2 gpio: pca953x: Synchronize interrupt handler properly gpio: arizona: put pm_runtime in case of failure gpio: arizona: handle pm_runtime_get_sync failure case
-
- Jul 10, 2020
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2Linus Torvalds authored
Pull gfs2 fixes from Andreas Gruenbacher: "Fix gfs2 readahead deadlocks by adding a IOCB_NOIO flag that allows gfs2 to use the generic fiel read iterator functions without having to worry about being called back while holding locks". * tag 'gfs2-v5.8-rc4.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2: gfs2: Rework read and page fault locking fs: Add IOCB_NOIO flag for generic_file_read_iter
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Will Deacon: "An unfortunately large collection of arm64 fixes for -rc5. Some of this is absolutely trivial, but the alternatives, vDSO and CPU errata workaround fixes are significant. At least people are finding and fixing these things, I suppose. - Fix workaround for CPU erratum #1418040 to disable the compat vDSO - Fix Oops when single-stepping with KGDB - Fix memory attributes for hypervisor device mappings at EL2 - Fix memory leak in PSCI and remove useless variable assignment - Fix up some comments and asm labels in our entry code - Fix broken register table formatting in our generated html docs - Fix missing NULL sentinel in CPU errata workaround list - Fix patching of branches in alternative instruction sections" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64/alternatives: don't patch up internal branches arm64: Add missing sentinel to erratum_1463225 arm64: Documentation: Fix broken table in generated HTML arm64: kgdb: Fix single-step exception handling oops arm64: entry: Tidy up block comments and label numbers arm64: Rework ARM_ERRATUM_1414080 handling arm64: arch_timer: Disable the compat vdso for cores affected by ARM64_WORKAROUND_1418040 arm64: arch_timer: Allow an workaround descriptor to disable compat vdso arm64: Introduce a way to disable the 32bit vdso arm64: entry: Fix the typo in the comment of el1_dbg() drivers/firmware/psci: Assign @err directly in hotplug_tests() drivers/firmware/psci: Fix memory leakage in alloc_init_cpu_groups() KVM: arm64: Fix definition of PAGE_HYP_DEVICE
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Heiko Carstens: "This is mainly due to the fact that Gerald Schaefer's and also my old email addresses currently do not work any longer. Therefore we decided to switch to new email addresses and reflect that in the MAINTAINERS file. - Update email addresses in MAINTAINERS file and add .mailmap entries for Gerald Schaefer and Heiko Carstens. - Fix huge pte soft dirty copying" * tag 's390-5.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: MAINTAINERS: update email address for Gerald Schaefer MAINTAINERS: update email address for Heiko Carstens s390/mm: fix huge pte soft dirty copying
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull vkm fixes from Paolo Bonzini: "Two simple but important bugfixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: MIPS: Fix build errors for 32bit kernel KVM: nVMX: fixes for preemption timer migration
-