The register starts from 0x800 is the 16th MAC address register rather
than the first one.

Fixes: cffb13f4

 ("stmmac: extend mac addr reg and fix perfect filering")
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Rahul Lakkireddy says:

====================
cxgb4: bug fixes for ethtool flash ops

This series of patches add bug fixes in ethtool flash operations.

Patch 1 fixes an endianness issue when writing boot image to flash
after the device ID has been updated.

Patch 2 fixes sleep in atomic when writing PHY firmware to flash.

Patch 3 fixes issue with PHY firmware image not getting written to
flash when chip is still running.
-====================

Signed-off-by: David S. Miller <davem@davemloft.net>

When using firmware-assisted PHY firmware image write to flash,
halt the chip before beginning the flash write operation to allow
the running firmware to store the image persistently. Otherwise,
the running firmware will only store the PHY image in local on-chip
RAM, which will be lost after next reset.

Fixes: 4ee339e1

 ("cxgb4: add support to flash PHY image")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Before writing new PHY firmware to on-chip memory, driver queries
firmware for current running PHY firmware version, which can result
in sleep waiting for reply. So, move spinlock closer to the actual
on-chip memory write operation, instead of taking it at the callers.

Fixes: 5fff701c

 ("cxgb4: always sync access when flashing PHY firmware")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Boot images are copied to memory and updated with current underlying
device ID before flashing them to adapter. Ensure the updated images
are always flashed in Big Endian to allow the firmware to read the
new images during boot properly.

Fixes: 55088355

 ("cxgb4: add support to flash boot image")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.

Fixes: ab69bde6

 ("alx: add a simple AR816x/AR817x device driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current logic is performing hard reset and causing the programmed
registers to be wiped out.

as per datasheet: https://www.ti.com/lit/ds/symlink/dp83867cr.pdf
8.6.26 Control Register (CTRL)

do SW_RESTART to perform a reset not including the registers,
If performed when link is already present,
it will drop the link and trigger re-auto negotiation.

Signed-off-by: Praneeth Bajjuri <praneeth@ti.com>
Signed-off-by: Geet Modi <geet.modi@ti.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Mat Martineau says:

====================
mptcp: More v5.13 fixes

Here's another batch of MPTCP fixes for v5.13.

Patch 1 cleans up memory accounting between the MPTCP-level socket and
the subflows to more reliably transfer forward allocated memory under
pressure.

Patch 2 wakes up socket readers more reliably.

Patch 3 changes a WARN_ONCE to a pr_debug.

Patch 4 changes the selftests to only use syncookies in test cases where
they do not cause spurious failures.

Patch 5 modifies socket error reporting to avoid a possible soft lockup.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Maxim reported a soft lookup in subflow_error_report():

 watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0]
 RIP: 0010:native_queued_spin_lock_slowpath
 RSP: 0018:ffffa859c0003bc0 EFLAGS: 00000202
 RAX: 0000000000000101 RBX: 0000000000000001 RCX: 0000000000000000
 RDX: ffff9195c2772d88 RSI: 0000000000000000 RDI: ffff9195c2772d88
 RBP: ffff9195c2772d00 R08: 00000000000067b0 R09: c6e31da9eb1e44f4
 R10: ffff9195ef379700 R11: ffff9195edb50710 R12: ffff9195c2772d88
 R13: ffff9195f500e3d0 R14: ffff9195ef379700 R15: ffff9195ef379700
 FS:  0000000000000000(0000) GS:ffff91961f400000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000000c000407000 CR3: 0000000002988000 CR4: 00000000000006f0
 Call Trace:
  <IRQ>
 _raw_spin_lock_bh
 subflow_error_report
 mptcp_subflow_data_available
 __mptcp_move_skbs_from_subflow
 mptcp_data_ready
 tcp_data_queue
 tcp_rcv_established
 tcp_v4_do_rcv
 tcp_v4_rcv
 ip_protocol_deliver_rcu
 ip_local_deliver_finish
 __netif_receive_skb_one_core
 netif_receive_skb
 rtl8139_poll 8139too
 __napi_poll
 net_rx_action
 __do_softirq
 __irq_exit_rcu
 common_interrupt
  </IRQ>

The calling function - mptcp_subflow_data_available() - can be invoked
from different contexts:
- plain ssk socket lock
- ssk socket lock + mptcp_data_lock
- ssk socket lock + mptcp_data_lock + msk socket lock.

Since subflow_error_report() tries to acquire the mptcp_data_lock, the
latter two call chains will cause soft lookup.

This change addresses the issue moving the error reporting call to
outer functions, where the held locks list is known and the we can
acquire only the needed one.

Reported-by: Maxim Galaganov <max@internet.ru>
Fixes: 15cc1045

 ("mptcp: deliver ssk errors to msk")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/199
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Syncookie validation may fail for OoO packets, causing spurious
resets and self-tests failures, so let's force syncookie only
for tests iteration with no OoO.

Fixes: fed61c4b

 ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/198
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

warn_bad_map() produces a kernel WARN on bad input coming
from the network. Use pr_debug() to avoid spamming the system
log.

Additionally, when the right bound check fails, warn_bad_map() reports
the wrong ssn value, let's fix it.

Fixes: 648ef4b8

 ("mptcp: Implement MPTCP receive path")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/107
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently we rely on the subflow->data_avail field, which is subject to
races:

	ssk1
		skb len = 500 DSS(seq=1, len=1000, off=0)
		# data_avail == MPTCP_SUBFLOW_DATA_AVAIL

	ssk2
		skb len = 500 DSS(seq = 501, len=1000)
		# data_avail == MPTCP_SUBFLOW_DATA_AVAIL

	ssk1
		skb len = 500 DSS(seq = 1, len=1000, off =500)
		# still data_avail == MPTCP_SUBFLOW_DATA_AVAIL,
		# as the skb is covered by a pre-existing map,
		# which was in-sequence at reception time.

Instead we can explicitly check if some has been received in-sequence,
propagating the info from __mptcp_move_skbs_from_subflow().

Additionally add the 'ONCE' annotation to the 'data_avail' memory
access, as msk will read it outside the subflow socket lock.

Fixes: 648ef4b8

 ("mptcp: Implement MPTCP receive path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If the host is under sever memory pressure, and RX forward
memory allocation for the msk fails, we try to borrow the
required memory from the ingress subflow.

The current attempt is a bit flaky: if skb->truesize is less
than SK_MEM_QUANTUM, the ssk will not release any memory, and
the next schedule will fail again.

Instead, directly move the required amount of pages from the
ssk to the msk, if available

Fixes: 9c3f94e1

 ("mptcp: add missing memory scheduling in the rx path")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Fix a crash when stateful expression with its own gc callback
   is used in a set definition.

2) Skip IPv6 packets from any link-local address in IPv6 fib expression.
   Add a selftest for this scenario, from Florian Westphal.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Maxim Mikityanskiy says:

====================
Fix out of bounds when parsing TCP options

This series fixes out-of-bounds access in various places in the kernel
where parsing of TCP options takes place. Fortunately, many more
occurrences don't have this bug.

v2 changes:

synproxy: Added an early return when length < 0 to avoid calling
skb_header_pointer with negative length.

sch_cake: Added doff validation to avoid parsing garbage.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The TCP option parser in cake qdisc (cake_get_tcpopt and
cake_tcph_may_drop) could read one byte out of bounds. When the length
is 1, the execution flow gets into the loop, reads one byte of the
opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads
one more byte, which exceeds the length of 1.

This fix is inspired by commit 9609dad2 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").

v2 changes:

Added doff validation in cake_get_tcphdr to avoid parsing garbage as TCP
header. Although it wasn't strictly an out-of-bounds access (memory was
allocated), garbage values could be read where CAKE expected the TCP
header if doff was smaller than 5.

Cc: Young Xiao <92siuyang@gmail.com>
Fixes: 8b713881

 ("sch_cake: Add optional ACK filter")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TCP option parser in mptcp (mptcp_get_options) could read one byte
out of bounds. When the length is 1, the execution flow gets into the
loop, reads one byte of the opcode, and if the opcode is neither
TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the
length of 1.

This fix is inspired by commit 9609dad2 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").

Cc: Young Xiao <92siuyang@gmail.com>
Fixes: cec37a6e

 ("mptcp: Handle MP_CAPABLE options for outgoing connections")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The TCP option parser in synproxy (synproxy_parse_options) could read
one byte out of bounds. When the length is 1, the execution flow gets
into the loop, reads one byte of the opcode, and if the opcode is
neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds
the length of 1.

This fix is inspired by commit 9609dad2 ("ipv4: tcp_input: fix stack
out of bounds when parsing TCP options.").

v2 changes:

Added an early return when length < 0 to avoid calling
skb_header_pointer with negative length.

Cc: Young Xiao <92siuyang@gmail.com>
Fixes: 48b1de4c

 ("netfilter: add SYNPROXY core/target")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

There is a known race in packet_sendmsg(), addressed
in commit 32d3182c

 ("net/packet: fix race in tpacket_snd()")

Now we have data_race(), we can use it to avoid a future KCSAN warning,
as syzbot loves stressing af_packet sockets :)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

UDP sendmsg() path can be lockless, it is possible for another
thread to re-connect an change sk->sk_txhash under us.

There is no serious impact, but we can use READ_ONCE()/WRITE_ONCE()
pair to document the race.

BUG: KCSAN: data-race in __ip4_datagram_connect / skb_set_owner_w

write to 0xffff88813397920c of 4 bytes by task 30997 on cpu 1:
 sk_set_txhash include/net/sock.h:1937 [inline]
 __ip4_datagram_connect+0x69e/0x710 net/ipv4/datagram.c:75
 __ip6_datagram_connect+0x551/0x840 net/ipv6/datagram.c:189
 ip6_datagram_connect+0x2a/0x40 net/ipv6/datagram.c:272
 inet_dgram_connect+0xfd/0x180 net/ipv4/af_inet.c:580
 __sys_connect_file net/socket.c:1837 [inline]
 __sys_connect+0x245/0x280 net/socket.c:1854
 __do_sys_connect net/socket.c:1864 [inline]
 __se_sys_connect net/socket.c:1861 [inline]
 __x64_sys_connect+0x3d/0x50 net/socket.c:1861
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff88813397920c of 4 bytes by task 31039 on cpu 0:
 skb_set_hash_from_sk include/net/sock.h:2211 [inline]
 skb_set_owner_w+0x118/0x220 net/core/sock.c:2101
 sock_alloc_send_pskb+0x452/0x4e0 net/core/sock.c:2359
 sock_alloc_send_skb+0x2d/0x40 net/core/sock.c:2373
 __ip6_append_data+0x1743/0x21a0 net/ipv6/ip6_output.c:1621
 ip6_make_skb+0x258/0x420 net/ipv6/ip6_output.c:1983
 udpv6_sendmsg+0x160a/0x16b0 net/ipv6/udp.c:1527
 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:642
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
 ___sys_sendmsg net/socket.c:2404 [inline]
 __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490
 __do_sys_sendmmsg net/socket.c:2519 [inline]
 __se_sys_sendmmsg net/socket.c:2516 [inline]
 __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516
 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0xbca3c43d -> 0xfdb309e0

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 31039 Comm: syz-executor.2 Not tainted 5.13.0-rc3-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sock_error() is known to be racy. The code avoids
an atomic operation is sk_err is zero, and this field
could be changed under us, this is fine.

Sysbot reported:

BUG: KCSAN: data-race in sock_alloc_send_pskb / unix_release_sock

write to 0xffff888131855630 of 4 bytes by task 9365 on cpu 1:
 unix_release_sock+0x2e9/0x6e0 net/unix/af_unix.c:550
 unix_release+0x2f/0x50 net/unix/af_unix.c:859
 __sock_release net/socket.c:599 [inline]
 sock_close+0x6c/0x150 net/socket.c:1258
 __fput+0x25b/0x4e0 fs/file_table.c:280
 ____fput+0x11/0x20 fs/file_table.c:313
 task_work_run+0xae/0x130 kernel/task_work.c:164
 tracehook_notify_resume include/linux/tracehook.h:189 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:174 [inline]
 exit_to_user_mode_prepare+0x156/0x190 kernel/entry/common.c:208
 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline]
 syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:301
 do_syscall_64+0x56/0x90 arch/x86/entry/common.c:57
 entry_SYSCALL_64_after_hwframe+0x44/0xae

read to 0xffff888131855630 of 4 bytes by task 9385 on cpu 0:
 sock_error include/net/sock.h:2269 [inline]
 sock_alloc_send_pskb+0xe4/0x4e0 net/core/sock.c:2336
 unix_dgram_sendmsg+0x478/0x1610 net/unix/af_unix.c:1671
 unix_seqpacket_sendmsg+0xc2/0x100 net/unix/af_unix.c:2055
 sock_sendmsg_nosec net/socket.c:654 [inline]
 sock_sendmsg net/socket.c:674 [inline]
 ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350
 __sys_sendmsg_sock+0x25/0x30 net/socket.c:2416
 io_sendmsg fs/io_uring.c:4367 [inline]
 io_issue_sqe+0x231a/0x6750 fs/io_uring.c:6135
 __io_queue_sqe+0xe9/0x360 fs/io_uring.c:6414
 __io_req_task_submit fs/io_uring.c:2039 [inline]
 io_async_task_func+0x312/0x590 fs/io_uring.c:5074
 __tctx_task_work fs/io_uring.c:1910 [inline]
 tctx_task_work+0x1d4/0x3d0 fs/io_uring.c:1924
 task_work_run+0xae/0x130 kernel/task_work.c:164
 tracehook_notify_signal include/linux/tracehook.h:212 [inline]
 handle_signal_work kernel/entry/common.c:145 [inline]
 exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
 exit_to_user_mode_prepare+0xf8/0x190 kernel/entry/common.c:208
 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline]
 syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:301
 do_syscall_64+0x56/0x90 arch/x86/entry/common.c:57
 entry_SYSCALL_64_after_hwframe+0x44/0xae

value changed: 0x00000000 -> 0x00000068

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 9385 Comm: syz-executor.3 Not tainted 5.13.0-rc4-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Nikolay Aleksandrov says:

====================
net: bridge: vlan tunnel egress path fixes

These two fixes take care of tunnel_dst problems in the vlan tunnel egress
path. Patch 01 fixes a null ptr deref due to the lockless use of tunnel_dst
pointer without checking it first, and patch 02 fixes a use-after-free
issue due to wrong dst refcounting (dst_clone() -> dst_hold_safe()).

Both fix the same commit and should be queued for stable backports:
Fixes: 11538d03

 ("bridge: vlan dst_metadata hooks in ingress and egress paths")

v2: no changes, added stable list to CC
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The egress tunnel code uses dst_clone() and directly sets the result
which is wrong because the entry might have 0 refcnt or be already deleted,
causing number of problems. It also triggers the WARN_ON() in dst_hold()[1]
when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and
checking if a reference was actually taken before setting the dst.

[1] dmesg WARN_ON log and following refcnt errors
 WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
 Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net
 CPU: 5 PID: 38 Comm: ksoftirqd/5 Kdump: loaded Tainted: G        W         5.13.0-rc3+ #360
 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014
 RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge]
 Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49
 RSP: 0018:ffff8881003d39e8 EFLAGS: 00010246
 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0
 RBP: ffff8881040c6700 R08: 0000000000000000 R09: 0000000000000001
 R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000
 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401
 FS:  0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0
 Call Trace:
  br_handle_vlan+0xbc/0xca [bridge]
  __br_forward+0x23/0x164 [bridge]
  deliver_clone+0x41/0x48 [bridge]
  br_handle_frame_finish+0x36f/0x3aa [bridge]
  ? skb_dst+0x2e/0x38 [bridge]
  ? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge]
  ? br_handle_frame_finish+0x3aa/0x3aa [bridge]
  br_handle_frame+0x2c3/0x377 [bridge]
  ? __skb_pull+0x33/0x51
  ? vlan_do_receive+0x4f/0x36a
  ? br_handle_frame_finish+0x3aa/0x3aa [bridge]
  __netif_receive_skb_core+0x539/0x7c6
  ? __list_del_entry_valid+0x16e/0x1c2
  __netif_receive_skb_list_core+0x6d/0xd6
  netif_receive_skb_list_internal+0x1d9/0x1fa
  gro_normal_list+0x22/0x3e
  dev_gro_receive+0x55b/0x600
  ? detach_buf_split+0x58/0x140
  napi_gro_receive+0x94/0x12e
  virtnet_poll+0x15d/0x315 [virtio_net]
  __napi_poll+0x2c/0x1c9
  net_rx_action+0xe6/0x1fb
  __do_softirq+0x115/0x2d8
  run_ksoftirqd+0x18/0x20
  smpboot_thread_fn+0x183/0x19c
  ? smpboot_unregister_percpu_thread+0x66/0x66
  kthread+0x10a/0x10f
  ? kthread_mod_delayed_work+0xb6/0xb6
  ret_from_fork+0x22/0x30
 ---[ end trace 49f61b07f775fd2b ]---
 dst_release: dst:00000000c02d677a refcnt:-1
 dst_release underflow

Cc: stable@vger.kernel.org
Fixes: 11538d03

 ("bridge: vlan dst_metadata hooks in ingress and egress paths")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes a tunnel_dst null pointer dereference due to lockless
access in the tunnel egress path. When deleting a vlan tunnel the
tunnel_dst pointer is set to NULL without waiting a grace period (i.e.
while it's still usable) and packets egressing are dereferencing it
without checking. Use READ/WRITE_ONCE to annotate the lockless use of
tunnel_id, use RCU for accessing tunnel_dst and make sure it is read
only once and checked in the egress path. The dst is already properly RCU
protected so we don't need to do anything fancy than to make sure
tunnel_id and tunnel_dst are read only once and checked in the egress path.

Cc: stable@vger.kernel.org
Fixes: 11538d03

 ("bridge: vlan dst_metadata hooks in ingress and egress paths")
Signed-off-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Function 'ping_queue_rcv_skb' not always return success, which will
also return fail. If not check the wrong return value of it, lead to function
`ping_rcv` return success.

Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

msg_zerocopy signals if a send operation required copying with a flag
in serr->ee.ee_code.

This field can be incorrect as of the below commit, as a result of
both structs uarg and serr pointing into the same skb->cb[].

uarg->zerocopy must be read before skb->cb[] is reinitialized to hold
serr. Similar to other fields len, hi and lo, use a local variable to
temporarily hold the value.

This was not a problem before, when the value was passed as a function
argument.

Fixes: 75518851

 ("skbuff: Push status and refcounts into sock_zerocopy_callback")
Reported-by: Talal Ahmad <talalahmad@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5-fixes-2021-06-09
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

The device is able to offload either the outer header csum or inner
header csum. The driver utilizes the inner csum offload. So, prohibit
setting of tx-gre-csum-segmentation and let it be: off[fixed].

Fixes: 27299841

 ("net/mlx5e: Support TSO and TX checksum offloads for GRE tunnels")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

The device is able to offload either the outer header csum or inner
header csum. The driver utilizes the inner csum offload. Hence, block
setting of tx-udp_tnl-csum-segmentation and set it to off[fixed].

Fixes: b49663c8

 ("net/mlx5e: Add support for UDP tunnel segmentation with outer checksum offload")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

In the scenario described below, an EQ can remain in FIRED state which
can result in missing an interrupt generation.

The scenario:

device                       mlx5_core driver
------                       ----------------
EQ1.eqe generated
EQ1.MSI-X sent
EQ1.state = FIRED
EQ2.eqe generated
                             mlx5_irq()
                               polls - eq1_eqes()
                               arm eq1
                               polls - eq2_eqes()
                               arm eq2
EQ2.MSI-X sent
EQ2.state = FIRED
                              mlx5_irq()
                              polls - eq2_eqes() -- no eqes found
                              driver skips EQ arming;

->EQ2 remains fired, misses generating interrupt.

Hence, always arm the EQ by reverting the cited commit in fixes tag.

Fixes: d894892d

 ("net/mlx5: Arm only EQs with EQEs")
Signed-off-by: Shay Drory <shayd@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Steering packets to PTP-SQ should be done only if the SKB has
SKBTX_HW_TSTAMP set in the tx_flags. While here, take the function into
a header and inline it.
Set the whole condition to select the PTP-SQ to unlikely.

Fixes: 24c22dd0

 ("net/mlx5e: Add states to PTP channel")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Since the driver opens the PTP-RQ under channel 0, it appears to the
stack as if the SKB was received on rxq0. So from thew stack POV there
are still the same number of RX queues.

Fixes: 960fbfe2

 ("net/mlx5e: Allow coexistence of CQE compression and HW TS PTP")
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When changing eswitch mode, the netdev is detached from the
hardware resources. So verify dev is present in get devlink
port ndo. Otherwise, we will hit the following panic:

[241535.973539] RIP: 0010:__devlink_port_phys_port_name_get+0x13/0x1b0
[241535.976471] RSP: 0018:ffff9eaf0ae1b7c8 EFLAGS: 00010292
[241535.977471] RAX: 000000000002d370 RBX: 000000000002d370 RCX: 0000000000000000
[241535.978479] RDX: 0000000000000010 RSI: ffff9eaf0ae1b858 RDI: 000000000002d370
[241535.979482] RBP: ffff9eaf0ae1b7e0 R08: 000000000000002a R09: ffff8888d54d13da
[241535.980486] R10: 0000000000000000 R11: 0000000000000000 R12: ffff8888e6700000
[241535.981491] R13: ffff9eaf0ae1b858 R14: 0000000000000010 R15: 0000000000000000
[241535.982489] FS:  00007fd374ef3740(0000) GS:ffff88909ea00000(0000) knlGS:0000000000000000
[241535.983494] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[241535.984487] CR2: 000000000002d444 CR3: 000000089fd26006 CR4: 00000000003706e0
[241535.985502] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[241535.986499] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[241535.987477] Call Trace:
[241535.988426]  ? nla_put_64bit+0x71/0xa0
[241535.989368]  devlink_compat_phys_port_name_get+0x50/0xa0
[241535.990312]  dev_get_phys_port_name+0x4b/0x60
[241535.991252]  rtnl_fill_ifinfo+0x57b/0xcb0
[241535.992192]  rtnl_dump_ifinfo+0x58f/0x6d0
[241535.993123]  ? ksize+0x14/0x20
[241535.994033]  ? __alloc_skb+0xe8/0x250
[241535.994935]  netlink_dump+0x17c/0x300
[241535.995821]  netlink_recvmsg+0x1de/0x2c0
[241535.996677]  sock_recvmsg+0x70/0x80
[241535.997518]  ____sys_recvmsg+0x9b/0x1b0
[241535.998360]  ? iovec_from_user+0x82/0x120
[241535.999202]  ? __import_iovec+0x2c/0x130
[241536.000031]  ___sys_recvmsg+0x94/0x130
[241536.000850]  ? __handle_mm_fault+0x56d/0x6e0
[241536.001668]  __sys_recvmsg+0x5f/0xb0
[241536.002464]  ? syscall_enter_from_user_mode+0x2b/0x80
[241536.003242]  __x64_sys_recvmsg+0x1f/0x30
[241536.004008]  do_syscall_64+0x38/0x50
[241536.004767]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[241536.005532] RIP: 0033:0x7fd375014f47

Fixes: 2ff349c5

 ("net/mlx5e: Verify dev is present in some ndos")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

SW steering uses RC QP to write/read to/from ICM, hence it's not
supported when RoCE is not supported as well.

Fixes: 70605ea5

 ("net/mlx5: DR, Expose APIs for direct rule managing")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Reviewed-by: Alex Vesker <valex@nvidia.com>
Reviewed-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Check if RoCE is supported by the device before enable it in
the vport context and create all the RDMA steering objects.

Fixes: 80f09dfc

 ("net/mlx5: Eswitch, enable RoCE loopback traffic")
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When adding a hairpin flow, a firmware-side send queue is created for
the peer net device, which claims some host memory pages for its
internal ring buffer. If the peer net device is removed/unbound before
the hairpin flow is deleted, then the send queue is not destroyed which
leads to a stack trace on pci device remove:

[ 748.005230] mlx5_core 0000:08:00.2: wait_func:1094:(pid 12985): MANAGE_PAGES(0x108) timeout. Will cause a leak of a command resource
[ 748.005231] mlx5_core 0000:08:00.2: reclaim_pages:514:(pid 12985): failed reclaiming pages: err -110
[ 748.001835] mlx5_core 0000:08:00.2: mlx5_reclaim_root_pages:653:(pid 12985): failed reclaiming pages (-110) for func id 0x0
[ 748.002171] ------------[ cut here ]------------
[ 748.001177] FW pages counter is 4 after reclaiming all pages
[ 748.001186] WARNING: CPU: 1 PID: 12985 at drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:685 mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core]                      [  +0.002771] Modules linked in: cls_flower mlx5_ib mlx5_core ptp pps_core act_mirred sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_umad ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay fuse [last unloaded: pps_core]
[ 748.007225] CPU: 1 PID: 12985 Comm: tee Not tainted 5.12.0+ #1
[ 748.001376] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 748.002315] RIP: 0010:mlx5_reclaim_startup_pages+0x34b/0x460 [mlx5_core]
[ 748.001679] Code: 28 00 00 00 0f 85 22 01 00 00 48 81 c4 b0 00 00 00 31 c0 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 c7 c7 40 cc 19 a1 e8 9f 71 0e e2 <0f> 0b e9 30 ff ff ff 48 c7 c7 a0 cc 19 a1 e8 8c 71 0e e2 0f 0b e9
[ 748.003781] RSP: 0018:ffff88815220faf8 EFLAGS: 00010286
[ 748.001149] RAX: 0000000000000000 RBX: ffff8881b4900280 RCX: 0000000000000000
[ 748.001445] RDX: 0000000000000027 RSI: 0000000000000004 RDI: ffffed102a441f51
[ 748.001614] RBP: 00000000000032b9 R08: 0000000000000001 R09: ffffed1054a15ee8
[ 748.001446] R10: ffff8882a50af73b R11: ffffed1054a15ee7 R12: fffffbfff07c1e30
[ 748.001447] R13: dffffc0000000000 R14: ffff8881b492cba8 R15: 0000000000000000
[ 748.001429] FS:  00007f58bd08b580(0000) GS:ffff8882a5080000(0000) knlGS:0000000000000000
[ 748.001695] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 748.001309] CR2: 000055a026351740 CR3: 00000001d3b48006 CR4: 0000000000370ea0
[ 748.001506] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 748.001483] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 748.001654] Call Trace:
[ 748.000576]  ? mlx5_satisfy_startup_pages+0x290/0x290 [mlx5_core]
[ 748.001416]  ? mlx5_cmd_teardown_hca+0xa2/0xd0 [mlx5_core]
[ 748.001354]  ? mlx5_cmd_init_hca+0x280/0x280 [mlx5_core]
[ 748.001203]  mlx5_function_teardown+0x30/0x60 [mlx5_core]
[ 748.001275]  mlx5_uninit_one+0xa7/0xc0 [mlx5_core]
[ 748.001200]  remove_one+0x5f/0xc0 [mlx5_core]
[ 748.001075]  pci_device_remove+0x9f/0x1d0
[ 748.000833]  device_release_driver_internal+0x1e0/0x490
[ 748.001207]  unbind_store+0x19f/0x200
[ 748.000942]  ? sysfs_file_ops+0x170/0x170
[ 748.001000]  kernfs_fop_write_iter+0x2bc/0x450
[ 748.000970]  new_sync_write+0x373/0x610
[ 748.001124]  ? new_sync_read+0x600/0x600
[ 748.001057]  ? lock_acquire+0x4d6/0x700
[ 748.000908]  ? lockdep_hardirqs_on_prepare+0x400/0x400
[ 748.001126]  ? fd_install+0x1c9/0x4d0
[ 748.000951]  vfs_write+0x4d0/0x800
[ 748.000804]  ksys_write+0xf9/0x1d0
[ 748.000868]  ? __x64_sys_read+0xb0/0xb0
[ 748.000811]  ? filp_open+0x50/0x50
[ 748.000919]  ? syscall_enter_from_user_mode+0x1d/0x50
[ 748.001223]  do_syscall_64+0x3f/0x80
[ 748.000892]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 748.001026] RIP: 0033:0x7f58bcfb22f7
[ 748.000944] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
[ 748.003925] RSP: 002b:00007fffd7f2aaa8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[ 748.001732] RAX: ffffffffffffffda RBX: 000000000000000d RCX: 00007f58bcfb22f7
[ 748.001426] RDX: 000000000000000d RSI: 00007fffd7f2abc0 RDI: 0000000000000003
[ 748.001746] RBP: 00007fffd7f2abc0 R08: 0000000000000000 R09: 0000000000000001
[ 748.001631] R10: 00000000000001b6 R11: 0000000000000246 R12: 000000000000000d
[ 748.001537] R13: 00005597ac2c24a0 R14: 000000000000000d R15: 00007f58bd084700
[ 748.001564] irq event stamp: 0
[ 748.000787] hardirqs last  enabled at (0): [<0000000000000000>] 0x0
[ 748.001399] hardirqs last disabled at (0): [<ffffffff813132cf>] copy_process+0x146f/0x5eb0
[ 748.001854] softirqs last  enabled at (0): [<ffffffff8131330e>] copy_process+0x14ae/0x5eb0
[ 748.013431] softirqs last disabled at (0): [<0000000000000000>] 0x0
[ 748.001492] ---[ end trace a6fabd773d1c51ae ]---

Fix by destroying the send queue of a hairpin peer net device that is
being removed/unbound, which returns the allocated ring buffer pages to
the host.

Fixes: 4d8fcf21

 ("net/mlx5e: Avoid unbounded peer devices when unpairing TC hairpin rules")
Signed-off-by: Dima Chumak <dchumak@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Currently, IPsec feature is disabled because mlx5e_build_nic_netdev
is required to be called after mlx5e_ipsec_init. This requirement is
invalid as mlx5e_build_nic_netdev and mlx5e_ipsec_init initialize
independent resources.

Remove ipsec pointer check in mlx5e_build_nic_netdev so that the
two functions can be called at any order.

Fixes: 547eede0

 ("net/mlx5e: IPSec, Innova IPSec offload infrastructure")
Signed-off-by: Huy Nguyen <huyn@nvidia.com>
Reviewed-by: Raed Salem <raeds@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Function mlx5e_rep_neigh_update() wasn't updated to accommodate rtnl lock
removal from TC filter update path and properly handle concurrent encap
entry insertion/deletion which can lead to following use-after-free:

 [23827.464923] ==================================================================
 [23827.469446] BUG: KASAN: use-after-free in mlx5e_encap_take+0x72/0x140 [mlx5_core]
 [23827.470971] Read of size 4 at addr ffff8881d132228c by task kworker/u20:6/21635
 [23827.472251]
 [23827.472615] CPU: 9 PID: 21635 Comm: kworker/u20:6 Not tainted 5.13.0-rc3+ #5
 [23827.473788] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
 [23827.475639] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core]
 [23827.476731] Call Trace:
 [23827.477260]  dump_stack+0xbb/0x107
 [23827.477906]  print_address_description.constprop.0+0x18/0x140
 [23827.478896]  ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
 [23827.479879]  ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
 [23827.480905]  kasan_report.cold+0x7c/0xd8
 [23827.481701]  ? mlx5e_encap_take+0x72/0x140 [mlx5_core]
 [23827.482744]  kasan_check_range+0x145/0x1a0
 [23827.493112]  mlx5e_encap_take+0x72/0x140 [mlx5_core]
 [23827.494054]  ? mlx5e_tc_tun_encap_info_equal_generic+0x140/0x140 [mlx5_core]
 [23827.495296]  mlx5e_rep_neigh_update+0x41e/0x5e0 [mlx5_core]
 [23827.496338]  ? mlx5e_rep_neigh_entry_release+0xb80/0xb80 [mlx5_core]
 [23827.497486]  ? read_word_at_a_time+0xe/0x20
 [23827.498250]  ? strscpy+0xa0/0x2a0
 [23827.498889]  process_one_work+0x8ac/0x14e0
 [23827.499638]  ? lockdep_hardirqs_on_prepare+0x400/0x400
 [23827.500537]  ? pwq_dec_nr_in_flight+0x2c0/0x2c0
 [23827.501359]  ? rwlock_bug.part.0+0x90/0x90
 [23827.502116]  worker_thread+0x53b/0x1220
 [23827.502831]  ? process_one_work+0x14e0/0x14e0
 [23827.503627]  kthread+0x328/0x3f0
 [23827.504254]  ? _raw_spin_unlock_irq+0x24/0x40
 [23827.505065]  ? __kthread_bind_mask+0x90/0x90
 [23827.505912]  ret_from_fork+0x1f/0x30
 [23827.506621]
 [23827.506987] Allocated by task 28248:
 [23827.507694]  kasan_save_stack+0x1b/0x40
 [23827.508476]  __kasan_kmalloc+0x7c/0x90
 [23827.509197]  mlx5e_attach_encap+0xde1/0x1d40 [mlx5_core]
 [23827.510194]  mlx5e_tc_add_fdb_flow+0x397/0xc40 [mlx5_core]
 [23827.511218]  __mlx5e_add_fdb_flow+0x519/0xb30 [mlx5_core]
 [23827.512234]  mlx5e_configure_flower+0x191c/0x4870 [mlx5_core]
 [23827.513298]  tc_setup_cb_add+0x1d5/0x420
 [23827.514023]  fl_hw_replace_filter+0x382/0x6a0 [cls_flower]
 [23827.514975]  fl_change+0x2ceb/0x4a51 [cls_flower]
 [23827.515821]  tc_new_tfilter+0x89a/0x2070
 [23827.516548]  rtnetlink_rcv_msg+0x644/0x8c0
 [23827.517300]  netlink_rcv_skb+0x11d/0x340
 [23827.518021]  netlink_unicast+0x42b/0x700
 [23827.518742]  netlink_sendmsg+0x743/0xc20
 [23827.519467]  sock_sendmsg+0xb2/0xe0
 [23827.520131]  ____sys_sendmsg+0x590/0x770
 [23827.520851]  ___sys_sendmsg+0xd8/0x160
 [23827.521552]  __sys_sendmsg+0xb7/0x140
 [23827.522238]  do_syscall_64+0x3a/0x70
 [23827.522907]  entry_SYSCALL_64_after_hwframe+0x44/0xae
 [23827.523797]
 [23827.524163] Freed by task 25948:
 [23827.524780]  kasan_save_stack+0x1b/0x40
 [23827.525488]  kasan_set_track+0x1c/0x30
 [23827.526187]  kasan_set_free_info+0x20/0x30
 [23827.526968]  __kasan_slab_free+0xed/0x130
 [23827.527709]  slab_free_freelist_hook+0xcf/0x1d0
 [23827.528528]  kmem_cache_free_bulk+0x33a/0x6e0
 [23827.529317]  kfree_rcu_work+0x55f/0xb70
 [23827.530024]  process_one_work+0x8ac/0x14e0
 [23827.530770]  worker_thread+0x53b/0x1220
 [23827.531480]  kthread+0x328/0x3f0
 [23827.532114]  ret_from_fork+0x1f/0x30
 [23827.532785]
 [23827.533147] Last potentially related work creation:
 [23827.534007]  kasan_save_stack+0x1b/0x40
 [23827.534710]  kasan_record_aux_stack+0xab/0xc0
 [23827.535492]  kvfree_call_rcu+0x31/0x7b0
 [23827.536206]  mlx5e_tc_del_fdb_flow+0x577/0xef0 [mlx5_core]
 [23827.537305]  mlx5e_flow_put+0x49/0x80 [mlx5_core]
 [23827.538290]  mlx5e_delete_flower+0x6d1/0xe60 [mlx5_core]
 [23827.539300]  tc_setup_cb_destroy+0x18e/0x2f0
 [23827.540144]  fl_hw_destroy_filter+0x1d2/0x310 [cls_flower]
 [23827.541148]  __fl_delete+0x4dc/0x660 [cls_flower]
 [23827.541985]  fl_delete+0x97/0x160 [cls_flower]
 [23827.542782]  tc_del_tfilter+0x7ab/0x13d0
 [23827.543503]  rtnetlink_rcv_msg+0x644/0x8c0
 [23827.544257]  netlink_rcv_skb+0x11d/0x340
 [23827.544981]  netlink_unicast+0x42b/0x700
 [23827.545700]  netlink_sendmsg+0x743/0xc20
 [23827.546424]  sock_sendmsg+0xb2/0xe0
 [23827.547084]  ____sys_sendmsg+0x590/0x770
 [23827.547850]  ___sys_sendmsg+0xd8/0x160
 [23827.548606]  __sys_sendmsg+0xb7/0x140
 [23827.549303]  do_syscall_64+0x3a/0x70
 [23827.549969]  entry_SYSCALL_64_after_hwframe+0x44/0xae
 [23827.550853]
 [23827.551217] The buggy address belongs to the object at ffff8881d1322200
 [23827.551217]  which belongs to the cache kmalloc-256 of size 256
 [23827.553341] The buggy address is located 140 bytes inside of
 [23827.553341]  256-byte region [ffff8881d1322200, ffff8881d1322300)
 [23827.555747] The buggy address belongs to the page:
 [23827.556847] page:00000000898762aa refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d1320
 [23827.558651] head:00000000898762aa order:2 compound_mapcount:0 compound_pincount:0
 [23827.559961] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
 [23827.561243] raw: 002ffff800010200 dead000000000100 dead000000000122 ffff888100042b40
 [23827.562653] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000
 [23827.564112] page dumped because: kasan: bad access detected
 [23827.565439]
 [23827.565932] Memory state around the buggy address:
 [23827.566917]  ffff8881d1322180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 [23827.568485]  ffff8881d1322200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 [23827.569818] >ffff8881d1322280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
 [23827.571143]                       ^
 [23827.571879]  ffff8881d1322300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 [23827.573283]  ffff8881d1322380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
 [23827.574654] ==================================================================

Most of the necessary logic is already correctly implemented by
mlx5e_get_next_valid_encap() helper that is used in neigh stats update
handler. Make the handler generic by renaming it to
mlx5e_get_next_matching_encap() and use callback to test whether flow is
matching instead of hardcoded check for 'valid' flag value. Implement
mlx5e_get_next_valid_encap() by calling mlx5e_get_next_matching_encap()
with callback that tests encap MLX5_ENCAP_ENTRY_VALID flag. Implement new
mlx5e_get_next_init_encap() helper by calling
mlx5e_get_next_matching_encap() with callback that tests encap completion
result to be non-error and use it in mlx5e_rep_neigh_update() to safely
iterate over nhe->encap_list.

Remove encap completion logic from mlx5e_rep_update_flows() since the encap
entries passed to this function are already guaranteed to be properly
initialized by similar code in mlx5e_get_next_init_encap().

Fixes: 2a1f1768

 ("net/mlx5e: Refactor neigh update for concurrent execution")
Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When the code execute 'if (!priv->fs.arfs->wq)', the value of err is 0.
So, we use -ENOMEM to indicate that the function
create_singlethread_workqueue() return NULL.

Clean up smatch warning:
drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c:373
mlx5e_arfs_create_tables() warn: missing error code 'err'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Fixes: f6755b80

 ("net/mlx5e: Dynamic alloc arfs table for netdev when needed")
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2021-06-09

This series contains updates to ice driver only.

Maciej informs the user when XDP is not supported due to the driver
being in the 'safe mode' state. He also adds a parameter to Tx queue
configuration to resolve an issue in configuring XDP queues as it cannot
rely on using the number Tx or Rx queues.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>