- Jun 03, 2021
-
-
kernel test robot authored
[ Upstream commit 2b899f31 ] sound/usb/mixer_scarlett_gen2.c:2000:5: warning: symbol 'snd_scarlett_gen2_controls_create' was not declared. Should it be static? Fixes: 265d1a90 ("ALSA: usb-audio: scarlett2: Improve driver startup messages") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20210522180900.GA83915@f59a3af2f1d9 Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Francesco Ruggeri authored
[ Upstream commit e29f011e ] Commit dbd1759e ("ipv6: on reassembly, record frag_max_size") filled the frag_max_size field in IP6CB in the input path. The field should also be filled in case of atomic fragments. Fixes: dbd1759e ('ipv6: on reassembly, record frag_max_size') Signed-off-by:
Francesco Ruggeri <fruggeri@arista.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Aleksander Jan Bajkowski authored
[ Upstream commit c7718ee9 ] In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter. Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver ") Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit 8c7e7b84 ] If sas_notify_lldd_dev_found() fails then this code calls: sas_unregister_dev(port, dev); which removes "dev", our list iterator, from the list. This could lead to an endless loop. We need to use list_for_each_entry_safe(). Link: https://lore.kernel.org/r/YKUeq6gwfGcvvhty@mwanda Fixes: 303694ee ("[SCSI] libsas: suspend / resume support") Reviewed-by:
John Garry <john.garry@huawei.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jesse Brandeburg authored
[ Upstream commit 63e39d29 ] Check that the MTU value requested by the VF is in the supported range of MTUs before attempting to set the VF large packet enable, otherwise reject the request. This also avoids unnecessary register updates in the case of the 82599 controller. Fixes: 872844dd ("ixgbe: Enable jumbo frames support w/ SR-IOV") Co-developed-by:
Piotr Skajewski <piotrx.skajewski@intel.com> Signed-off-by:
Piotr Skajewski <piotrx.skajewski@intel.com> Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Signed-off-by:
Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jussi Maki authored
[ Upstream commit 84316ca4 ] The skb_change_head() helper did not set "skb->mac_len", which is problematic when it's used in combination with skb_redirect_peer(). Without it, redirecting a packet from a L3 device such as wireguard to the veth peer device will cause skb->data to point to the middle of the IP header on entry to tcp_v4_rcv() since the L2 header is not pulled correctly due to mac_len=0. Fixes: 3a0af8fd ("bpf: BPF for lightweight tunnel infrastructure") Signed-off-by:
Jussi Maki <joamaki@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20210519154743.2554771-2-joamaki@gmail.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit 833bc4cf ] This error path returns zero (success) but it should return -EINVAL. Fixes: 3333cb71 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwanda Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit e0112a7c ] The _nbu2ss_ep_done() function calls: list_del_init(&req->queue); which means that the loop will never exit. Fixes: ca3d253e ("Staging: emxx_udc: Iterate list using list_for_each_entry") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/YKUd0sDyjm/lkJfJ@mwanda Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Raju Rangoju authored
[ Upstream commit 88c380df ] Hardware register having the server TID base can contain invalid values when adapter is in bad state (for example, due to AER fatal error). Reading these invalid values in the register can lead to out-of-bound memory access. So, fix by using the saved server TID base when clearing filters. Fixes: b1a79360 ("cxgb4: Delete all hash and TCAM filters before resource cleanup") Signed-off-by:
Raju Rangoju <rajur@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
David Awogbemila authored
[ Upstream commit fbd4a28b ] SKBs with skb_get_queue_mapping(skb) == tx_cfg.num_queues should also be considered invalid. Fixes: f5cedc84 ("gve: Add transmit and receive support") Signed-off-by:
David Awogbemila <awogbemila@google.com> Acked-by:
Willem de Brujin <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Catherine Sullivan authored
[ Upstream commit f8178183 ] As currently written, if the driver checks for more work (via gve_tx_poll or gve_rx_poll) before the device posts work and the irq doorbell is not unmasked (via iowrite32be(GVE_IRQ_ACK | GVE_IRQ_EVENT, ...)) before the device attempts to raise an interrupt, an interrupt is lost and this could potentially lead to the traffic being completely halted. For example, if a tx queue has already been stopped, the driver won't get the chance to complete work and egress will be halted. We need a full memory barrier in the poll routine to ensure that the irq doorbell is unmasked before the driver checks for more work. Fixes: f5cedc84 ("gve: Add transmit and receive support") Signed-off-by:
Catherine Sullivan <csully@google.com> Signed-off-by:
David Awogbemila <awogbemila@google.com> Acked-by:
Willem de Brujin <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
David Awogbemila authored
[ Upstream commit 5218e919 ] When freeing notification blocks, we index priv->msix_vectors. If we failed to allocate priv->msix_vectors (see abort_with_msix_vectors) this could lead to a NULL pointer dereference if the driver is unloaded. Fixes: 893ce44d ("gve: Add basic driver framework for Compute Engine Virtual NIC") Signed-off-by:
David Awogbemila <awogbemila@google.com> Acked-by:
Willem de Brujin <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
David Awogbemila authored
[ Upstream commit e96b491a ] If we do not get the expected number of vectors from pci_enable_msix_range, we update priv->num_ntfy_blks but not priv->mgmt_msix_idx. This patch fixes this so that priv->mgmt_msix_idx is updated accordingly. Fixes: f5cedc84 ("gve: Add transmit and receive support") Signed-off-by:
David Awogbemila <awogbemila@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Catherine Sullivan authored
[ Upstream commit 5aec55b4 ] Correctly check the TX QPL was assigned and unassigned if other steps in the allocation fail. Fixes: f5cedc84 (gve: Add transmit and receive support) Signed-off-by:
Catherine Sullivan <csully@google.com> Signed-off-by:
David Awogbemila <awogbemila@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Taehee Yoo authored
[ Upstream commit 020ef930 ] mld_newpack() doesn't allow to allocate high order page, only order-0 allocation is allowed. If headroom size is too large, a kernel panic could occur in skb_put(). Test commands: ip netns del A ip netns del B ip netns add A ip netns add B ip link add veth0 type veth peer name veth1 ip link set veth0 netns A ip link set veth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set veth0 up ip netns exec A ip -6 a a 2001:db8:0::1/64 dev veth0 ip netns exec B ip link set lo up ip netns exec B ip link set veth1 up ip netns exec B ip -6 a a 2001:db8:0::2/64 dev veth1 for i in {1..99} do let A=$i-1 ip netns exec A ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::1 remote 2001:db8:$A::2 encaplimit 100 ip netns exec A ip -6 a a 2001:db8:$i::1/64 dev ip6gre$i ip netns exec A ip link set ip6gre$i up ip netns exec B ip link add ip6gre$i type ip6gre \ local 2001:db8:$A::2 remote 2001:db8:$A::1 encaplimit 100 ip netns exec B ip -6 a a 2001:db8:$i::2/64 dev ip6gre$i ip netns exec B ip link set ip6gre$i up done Splat looks like: kernel BUG at net/core/skbuff.c:110! invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI CPU: 0 PID: 7 Comm: kworker/0:1 Not tainted 5.12.0+ #891 Workqueue: ipv6_addrconf addrconf_dad_work RIP: 0010:skb_panic+0x15d/0x15f Code: 92 fe 4c 8b 4c 24 10 53 8b 4d 70 45 89 e0 48 c7 c7 00 ae 79 83 41 57 41 56 41 55 48 8b 54 24 a6 26 f9 ff <0f> 0b 48 8b 6c 24 20 89 34 24 e8 4a 4e 92 fe 8b 34 24 48 c7 c1 20 RSP: 0018:ffff88810091f820 EFLAGS: 00010282 RAX: 0000000000000089 RBX: ffff8881086e9000 RCX: 0000000000000000 RDX: 0000000000000089 RSI: 0000000000000008 RDI: ffffed1020123efb RBP: ffff888005f6eac0 R08: ffffed1022fc0031 R09: ffffed1022fc0031 R10: ffff888117e00187 R11: ffffed1022fc0030 R12: 0000000000000028 R13: ffff888008284eb0 R14: 0000000000000ed8 R15: 0000000000000ec0 FS: 0000000000000000(0000) GS:ffff888117c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f8b801c5640 CR3: 0000000033c2c006 CR4: 00000000003706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 skb_put.cold.104+0x22/0x22 ip6_mc_hdr.isra.26.constprop.46+0x12a/0x600 ? rcu_read_lock_sched_held+0x91/0xc0 mld_newpack+0x398/0x8f0 ? ip6_mc_hdr.isra.26.constprop.46+0x600/0x600 ? lock_contended+0xc40/0xc40 add_grhead.isra.33+0x280/0x380 add_grec+0x5ca/0xff0 ? mld_sendpack+0xf40/0xf40 ? lock_downgrade+0x690/0x690 mld_send_initial_cr.part.34+0xb9/0x180 ipv6_mc_dad_complete+0x15d/0x1b0 addrconf_dad_completed+0x8d2/0xbb0 ? lock_downgrade+0x690/0x690 ? addrconf_rs_timer+0x660/0x660 ? addrconf_dad_work+0x73c/0x10e0 addrconf_dad_work+0x73c/0x10e0 Allowing high order page allocation could fix this problem. Fixes: 72e09ad1 ("ipv6: avoid high order allocations") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andy Gospodarek authored
[ Upstream commit ab21494b ] Otherwise, some of the recently added HyperV VF IDs would not be recognized as VF devices and they would not initialize properly. Fixes: 7fbf359b ("bnxt_en: Add PCI IDs for Hyper-V VF devices.") Reviewed-by:
Edwin Peer <edwin.peer@broadcom.com> Signed-off-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Zhen Lei authored
[ Upstream commit 28c66b6d ] Fix to return -EPERM from the error handling case instead of 0, as done elsewhere in this function. Fixes: b6016b76 ("[BNX2]: New Broadcom gigabit network driver.") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Zhen Lei <thunder.leizhen@huawei.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Dan Carpenter authored
[ Upstream commit 31db0dbd ] In current kernels, small allocations never actually fail so this patch shouldn't affect runtime. Originally this error handling code written with the idea that if the "serial->tiocmget" allocation failed, then we would continue operating instead of bailing out early. But in later years we added an unchecked dereference on the next line. serial->tiocmget->serial_state_notification = kzalloc(); ^^^^^^^^^^^^^^^^^^ Since these allocations are never going fail in real life, this is mostly a philosophical debate, but I think bailing out early is the correct behavior that the user would want. And generally it's safer to bail as soon an error happens. Fixes: af0de130 ("usb: hso: obey DMA rules in tiocmget") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yunsheng Lin authored
[ Upstream commit dcad9ee9 ] The netdev qeueue might be stopped when byte queue limit has reached or tx hw ring is full, net_tx_action() may still be rescheduled if STATE_MISSED is set, which consumes unnecessary cpu without dequeuing and transmiting any skb because the netdev queue is stopped, see qdisc_run_end(). This patch fixes it by checking the netdev queue state before calling qdisc_run() and clearing STATE_MISSED if netdev queue is stopped during qdisc_run(), the net_tx_action() is rescheduled again when netdev qeueue is restarted, see netif_tx_wake_queue(). As there is time window between netif_xmit_frozen_or_stopped() checking and STATE_MISSED clearing, between which STATE_MISSED may set by net_tx_action() scheduled by netif_tx_wake_queue(), so set the STATE_MISSED again if netdev queue is restarted. Fixes: 6b3ba914 ("net: sched: allow qdiscs to handle locking") Reported-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yunsheng Lin authored
[ Upstream commit 102b55ee ] Currently qdisc_run() checks the STATE_DEACTIVATED of lockless qdisc before calling __qdisc_run(), which ultimately clear the STATE_MISSED when all the skb is dequeued. If STATE_DEACTIVATED is set before clearing STATE_MISSED, there may be rescheduling of net_tx_action() at the end of qdisc_run_end(), see below: CPU0(net_tx_atcion) CPU1(__dev_xmit_skb) CPU2(dev_deactivate) . . . . set STATE_MISSED . . __netif_schedule() . . . set STATE_DEACTIVATED . . qdisc_reset() . . . .<--------------- . synchronize_net() clear __QDISC_STATE_SCHED | . . . | . . . | . some_qdisc_is_busy() . | . return *false* . | . . test STATE_DEACTIVATED | . . __qdisc_run() *not* called | . . . | . . test STATE_MISS | . . __netif_schedule()--------| . . . . . . . . __qdisc_run() is not called by net_tx_atcion() in CPU0 because CPU2 has set STATE_DEACTIVATED flag during dev_deactivate(), and STATE_MISSED is only cleared in __qdisc_run(), __netif_schedule is called at the end of qdisc_run_end(), causing tx action rescheduling problem. qdisc_run() called by net_tx_action() runs in the softirq context, which should has the same semantic as the qdisc_run() called by __dev_xmit_skb() protected by rcu_read_lock_bh(). And there is a synchronize_net() between STATE_DEACTIVATED flag being set and qdisc_reset()/some_qdisc_is_busy in dev_deactivate(), we can safely bail out for the deactived lockless qdisc in net_tx_action(), and qdisc_reset() will reset all skb not dequeued yet. So add the rcu_read_lock() explicitly to protect the qdisc_run() and do the STATE_DEACTIVATED checking in net_tx_action() before calling qdisc_run_begin(). Another option is to do the checking in the qdisc_run_end(), but it will add unnecessary overhead for non-tx_action case, because __dev_queue_xmit() will not see qdisc with STATE_DEACTIVATED after synchronize_net(), the qdisc with STATE_DEACTIVATED can only be seen by net_tx_action() because of __netif_schedule(). The STATE_DEACTIVATED checking in qdisc_run() is to avoid race between net_tx_action() and qdisc_reset(), see: commit d518d2ed ("net/sched: fix race between deactivation and dequeue for NOLOCK qdisc"). As the bailout added above for deactived lockless qdisc in net_tx_action() provides better protection for the race without calling qdisc_run() at all, so remove the STATE_DEACTIVATED checking in qdisc_run(). After qdisc_reset(), there is no skb in qdisc to be dequeued, so clear the STATE_MISSED in dev_reset_queue() too. Fixes: 6b3ba914 ("net: sched: allow qdiscs to handle locking") Acked-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> V8: Clearing STATE_MISSED before calling __netif_schedule() has avoid the endless rescheduling problem, but there may still be a unnecessary rescheduling, so adjust the commit log. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Yunsheng Lin authored
[ Upstream commit a90c57f2 ] Lockless qdisc has below concurrent problem: cpu0 cpu1 . . q->enqueue . . . qdisc_run_begin() . . . dequeue_skb() . . . sch_direct_xmit() . . . . q->enqueue . qdisc_run_begin() . return and do nothing . . qdisc_run_end() . cpu1 enqueue a skb without calling __qdisc_run() because cpu0 has not released the lock yet and spin_trylock() return false for cpu1 in qdisc_run_begin(), and cpu0 do not see the skb enqueued by cpu1 when calling dequeue_skb() because cpu1 may enqueue the skb after cpu0 calling dequeue_skb() and before cpu0 calling qdisc_run_end(). Lockless qdisc has below another concurrent problem when tx_action is involved: cpu0(serving tx_action) cpu1 cpu2 . . . . q->enqueue . . qdisc_run_begin() . . dequeue_skb() . . . q->enqueue . . . . sch_direct_xmit() . . . qdisc_run_begin() . . return and do nothing . . . clear __QDISC_STATE_SCHED . . qdisc_run_begin() . . return and do nothing . . . . . . qdisc_run_end() . This patch fixes the above data race by: 1. If the first spin_trylock() return false and STATE_MISSED is not set, set STATE_MISSED and retry another spin_trylock() in case other CPU may not see STATE_MISSED after it releases the lock. 2. reschedule if STATE_MISSED is set after the lock is released at the end of qdisc_run_end(). For tx_action case, STATE_MISSED is also set when cpu1 is at the end if qdisc_run_end(), so tx_action will be rescheduled again to dequeue the skb enqueued by cpu2. Clear STATE_MISSED before retrying a dequeuing when dequeuing returns NULL in order to reduce the overhead of the second spin_trylock() and __netif_schedule() calling. Also clear the STATE_MISSED before calling __netif_schedule() at the end of qdisc_run_end() to avoid doing another round of dequeuing in the pfifo_fast_dequeue(). The performance impact of this patch, tested using pktgen and dummy netdev with pfifo_fast qdisc attached: threads without+this_patch with+this_patch delta 1 2.61Mpps 2.60Mpps -0.3% 2 3.97Mpps 3.82Mpps -3.7% 4 5.62Mpps 5.59Mpps -0.5% 8 2.78Mpps 2.77Mpps -0.3% 16 2.22Mpps 2.22Mpps -0.0% Fixes: 6b3ba914 ("net: sched: allow qdiscs to handle locking") Acked-by:
Jakub Kicinski <kuba@kernel.org> Tested-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jim Ma authored
[ Upstream commit 974271e5 ] In tls_sw_splice_read, checkout MSG_* is inappropriate, should use SPLICE_*, update tls_wait_data to accept nonblock arguments instead of flags for recvmsg and splice. Fixes: c46234eb ("tls: RX path for ktls") Signed-off-by:
Jim Ma <majinjing3@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Tao Liu authored
[ Upstream commit e4df1b0c ] We have observed meters working unexpected if traffic is 3+Gbit/s with multiple connections. now_ms is not pretected by meter->lock, we may get a negative long_delta_ms when another cpu updated meter->used, then: delta_ms = (u32)long_delta_ms; which will be a large value. band->bucket += delta_ms * band->rate; then we get a wrong band->bucket. OpenVswitch userspace datapath has fixed the same issue[1] some time ago, and we port the implementation to kernel datapath. [1] https://patchwork.ozlabs.org/project/openvswitch/patch/20191025114436.9746-1-i.maximets@ovn.org/ Fixes: 96fbc13d ("openvswitch: Add meter infrastructure") Signed-off-by:
Tao Liu <thomas.liu@ucloud.cn> Suggested-by:
Ilya Maximets <i.maximets@ovn.org> Reviewed-by:
Ilya Maximets <i.maximets@ovn.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit e1d027dd ] 'bus->mii_bus' has been allocated with 'devm_mdiobus_alloc_size()' in the probe function. So it must not be freed explicitly or there will be a double free. Remove the incorrect 'mdiobus_free' in the error handling path of the probe function and in remove function. Suggested-By:
Andrew Lunn <andrew@lunn.ch> Fixes: 35d2aeac ("phy: mdio-octeon: Use devm_mdiobus_alloc_size()") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit a93a0a15 ] 'bus->mii_bus' have been allocated with 'devm_mdiobus_alloc_size()' in the probe function. So it must not be freed explicitly or there will be a double free. Remove the incorrect 'mdiobus_free' in the remove function. Fixes: 379d7ac7 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Fugang Duan authored
[ Upstream commit 619fee9e ] If the memory allocated for cbd_base is failed, it should free the memory allocated for the queues, otherwise it causes memory leak. And if the memory allocated for the queues is failed, it can return error directly. Fixes: 59d0f746 ("net: fec: init multi queue date structure") Signed-off-by:
Fugang Duan <fugang.duan@nxp.com> Signed-off-by:
Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Paolo Abeni authored
[ Upstream commit 098116e7 ] If the owing socket is shutting down - e.g. the sock reference count already dropped to 0 and only sk_wmem_alloc is keeping the sock alive, skb_orphan_partial() becomes a no-op. When forwarding packets over veth with GRO enabled, the above causes refcount errors. This change addresses the issue with a plain skb_orphan() call in the critical scenario. Fixes: 9adc89af ("net: let skb_orphan_partial wake-up waiters.") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Farman authored
[ Upstream commit c6c82e0c ] We have a really nice flag in the channel_program struct that indicates if it had been initialized by cp_init(), and use it as a guard in the other cp accessor routines, but not for a duplicate call into cp_init(). The possibility of this occurring is low, because that flow is protected by the private->io_mutex and FSM CP_PROCESSING state. But then why bother checking it in (for example) cp_prefetch() then? Let's just be consistent and check for that in cp_init() too. Fixes: 71189f26 ("vfio-ccw: make it safe to access channel programs") Signed-off-by:
Eric Farman <farman@linux.ibm.com> Reviewed-by:
Cornelia Huck <cohuck@redhat.com> Acked-by:
Matthew Rosato <mjrosato@linux.ibm.com> Message-Id: <20210511195631.3995081-2-farman@linux.ibm.com> Signed-off-by:
Cornelia Huck <cohuck@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Richard Fitzgerald authored
[ Upstream commit 0fad605f ] cs42l42 does not support standard burst transfers so the use_single_read and use_single_write flags must be set in the regmap config. Because of this bug, the patch: commit 0a0eb567 ("ASoC: cs42l42: Minor error paths fixups") broke cs42l42 probe() because without the use_single_* flags it causes regmap to issue a burst read. However, the missing use_single_* could cause problems anyway because the regmap cache can attempt burst transfers if these flags are not set. Fixes: 2c394ca7 ("ASoC: Add support for CS42L42 codec") Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Acked-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20210511132855.27159-1-rf@opensource.cirrus.com Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vladimir Oltean authored
[ Upstream commit b94cbc90 ] DSA implements a bunch of 'standardized' ethtool statistics counters, namely tx_packets, tx_bytes, rx_packets, rx_bytes. So whatever the hardware driver returns in .get_sset_count(), we need to add 4 to that. That is ok, except that .get_sset_count() can return a negative error code, for example: b53_get_sset_count -> phy_ethtool_get_sset_count -> return -EIO -EIO is -5, and with 4 added to it, it becomes -1, aka -EPERM. One can imagine that certain error codes may even become positive, although based on code inspection I did not see instances of that. Check the error code first, if it is negative return it as-is. Based on a similar patch for dsa_master_get_strings from Dan Carpenter: https://patchwork.kernel.org/project/netdevbpf/patch/YJaSe3RPgn7gKxZv@mwanda/ Fixes: 91da11f8 ("net: Distributed Switch Architecture protocol support") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit ddb6e00f ] 'ret' is known to be 0 here. The expected error code is stored in 'tx_pipe->dma_queue', so use it instead. While at it, switch from %d to %pe which is more user friendly. Fixes: 84640e27 ("net: netcp: Add Keystone NetCP core ethernet driver") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lang Yu authored
[ Upstream commit 9c2876d5 ] When amdgpu_ib_ring_tests failed, the reset logic called amdgpu_device_ip_suspend twice, then deadlock occurred. Deadlock log: [ 805.655192] amdgpu 0000:04:00.0: amdgpu: ib ring test failed (-110). [ 806.290952] [drm] free PSP TMR buffer [ 806.319406] ============================================ [ 806.320315] WARNING: possible recursive locking detected [ 806.321225] 5.11.0-custom #1 Tainted: G W OEL [ 806.322135] -------------------------------------------- [ 806.323043] cat/2593 is trying to acquire lock: [ 806.323825] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.325668] but task is already holding lock: [ 806.326664] ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.328430] other info that might help us debug this: [ 806.329539] Possible unsafe locking scenario: [ 806.330549] CPU0 [ 806.330983] ---- [ 806.331416] lock(&adev->dm.dc_lock); [ 806.332086] lock(&adev->dm.dc_lock); [ 806.332738] *** DEADLOCK *** [ 806.333747] May be due to missing lock nesting notation [ 806.334899] 3 locks held by cat/2593: [ 806.335537] #0: ffff888100d3f1b8 (&attr->mutex){+.+.}-{3:3}, at: simple_attr_read+0x4e/0x110 [ 806.337009] #1: ffff888136b1fd78 (&adev->reset_sem){++++}-{3:3}, at: amdgpu_device_lock_adev+0x42/0x94 [amdgpu] [ 806.339018] #2: ffff888136b1cdc8 (&adev->dm.dc_lock){+.+.}-{3:3}, at: dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.340869] stack backtrace: [ 806.341621] CPU: 6 PID: 2593 Comm: cat Tainted: G W OEL 5.11.0-custom #1 [ 806.342921] Hardware name: AMD Celadon-CZN/Celadon-CZN, BIOS WLD0C23N_Weekly_20_12_2 12/23/2020 [ 806.344413] Call Trace: [ 806.344849] dump_stack+0x93/0xbd [ 806.345435] __lock_acquire.cold+0x18a/0x2cf [ 806.346179] lock_acquire+0xca/0x390 [ 806.346807] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.347813] __mutex_lock+0x9b/0x930 [ 806.348454] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.349434] ? amdgpu_device_indirect_rreg+0x58/0x70 [amdgpu] [ 806.350581] ? _raw_spin_unlock_irqrestore+0x47/0x50 [ 806.351437] ? dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.352437] ? rcu_read_lock_sched_held+0x4f/0x80 [ 806.353252] ? rcu_read_lock_sched_held+0x4f/0x80 [ 806.354064] mutex_lock_nested+0x1b/0x20 [ 806.354747] ? mutex_lock_nested+0x1b/0x20 [ 806.355457] dm_suspend+0xb8/0x1d0 [amdgpu] [ 806.356427] ? soc15_common_set_clockgating_state+0x17d/0x19 [amdgpu] [ 806.357736] amdgpu_device_ip_suspend_phase1+0x78/0xd0 [amdgpu] [ 806.360394] amdgpu_device_ip_suspend+0x21/0x70 [amdgpu] [ 806.362926] amdgpu_device_pre_asic_reset+0xb3/0x270 [amdgpu] [ 806.365560] amdgpu_device_gpu_recover.cold+0x679/0x8eb [amdgpu] Signed-off-by:
Lang Yu <Lang.Yu@amd.com> Acked-by:
Christian KÃnig <christian.koenig@amd.com> Reviewed-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
xinhui pan authored
[ Upstream commit 1e5c3738 ] looks like we forget to set ttm->sg to NULL. Hit panic below [ 1235.844104] general protection fault, probably for non-canonical address 0x6b6b6b6b6b6b7b4b: 0000 [#1] SMP DEBUG_PAGEALLOC NOPTI [ 1235.989074] Call Trace: [ 1235.991751] sg_free_table+0x17/0x20 [ 1235.995667] amdgpu_ttm_backend_unbind.cold+0x4d/0xf7 [amdgpu] [ 1236.002288] amdgpu_ttm_backend_destroy+0x29/0x130 [amdgpu] [ 1236.008464] ttm_tt_destroy+0x1e/0x30 [ttm] [ 1236.013066] ttm_bo_cleanup_memtype_use+0x51/0xa0 [ttm] [ 1236.018783] ttm_bo_release+0x262/0xa50 [ttm] [ 1236.023547] ttm_bo_put+0x82/0xd0 [ttm] [ 1236.027766] amdgpu_bo_unref+0x26/0x50 [amdgpu] [ 1236.032809] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x7aa/0xd90 [amdgpu] [ 1236.040400] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] [ 1236.046912] kfd_ioctl+0x463/0x690 [amdgpu] Signed-off-by:
xinhui pan <xinhui.pan@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jingwen Chen authored
[ Upstream commit fa7e6abc ] [Why] the gem object rfb->base.obj[0] is get according to num_planes in amdgpufb_create, but is not put according to num_planes [How] put rfb->base.obj[0] in amdgpu_fbdev_destroy according to num_planes Signed-off-by:
Jingwen Chen <Jingwen.Chen2@amd.com> Acked-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chris Park authored
[ Upstream commit 08003927 ] [Why] Active DP dongles return no EDID when dongle is connected, but VGA display is taken out. Current driver behavior does not remove the active display when this happens, and this is a gap between dongle DTP and dongle behavior. [How] For active DP dongles and non-DP scenario, disconnect sink on detection when no EDID is read due to timeout. Signed-off-by:
Chris Park <Chris.Park@amd.com> Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Stylon Wang <stylon.wang@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Steve French authored
[ Upstream commit c0d46717 ] See MS-SMB2 3.2.4.1.4, file ids in compounded requests should be set to 0xFFFFFFFFFFFFFFFF (we were treating it as u32 not u64 and setting it incorrectly). Signed-off-by:
Steve French <stfrench@microsoft.com> Reported-by:
Stefan Metzmacher <metze@samba.org> Reviewed-by:
Shyam Prasad N <sprasad@microsoft.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Teava Radu authored
[ Upstream commit 39a6172e ] Add touchscreen info for the Mediacom Winpad 7.0 W700 tablet. Tested on 5.11 hirsute. Note: it's hw clone to Wintron surftab 7. Signed-off-by:
Teava Radu <rateava@gmail.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210504185746.175461-6-hdegoede@redhat.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Andy Shevchenko authored
[ Upstream commit bc1eca60 ] The intel_punit_ipc driver might be compiled as a module. When udev handles the event of the devices appearing the intel_punit_ipc module is missing. Append MODULE_DEVICE_TABLE for ACPI case to fix the loading issue. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20210519101521.79338-1-andriy.shevchenko@linux.intel.com Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Shyam Sundar S K authored
[ Upstream commit f048630b ] Newer AMD based laptops uses AMDI0051 as the hardware id to support the airplane mode button. Adding this to the supported list. Signed-off-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20210514180047.1697543-1-Shyam-sundar.S-k@amd.com Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Josef Bacik authored
[ Upstream commit 91df99a6 ] While doing error injection testing I got the following panic kernel BUG at fs/btrfs/tree-log.c:1862! invalid opcode: 0000 [#1] SMP NOPTI CPU: 1 PID: 7836 Comm: mount Not tainted 5.13.0-rc1+ #305 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014 RIP: 0010:link_to_fixup_dir+0xd5/0xe0 RSP: 0018:ffffb5800180fa30 EFLAGS: 00010216 RAX: fffffffffffffffb RBX: 00000000fffffffb RCX: ffff8f595287faf0 RDX: ffffb5800180fa37 RSI: ffff8f5954978800 RDI: 0000000000000000 RBP: ffff8f5953af9450 R08: 0000000000000019 R09: 0000000000000001 R10: 000151f408682970 R11: 0000000120021001 R12: ffff8f5954978800 R13: ffff8f595287faf0 R14: ffff8f5953c77dd0 R15: 0000000000000065 FS: 00007fc5284c8c40(0000) GS:ffff8f59bbd00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fc5287f47c0 CR3: 000000011275e002 CR4: 0000000000370ee0 Call Trace: replay_one_buffer+0x409/0x470 ? btree_read_extent_buffer_pages+0xd0/0x110 walk_up_log_tree+0x157/0x1e0 walk_log_tree+0xa6/0x1d0 btrfs_recover_log_trees+0x1da/0x360 ? replay_one_extent+0x7b0/0x7b0 open_ctree+0x1486/0x1720 btrfs_mount_root.cold+0x12/0xea ? __kmalloc_track_caller+0x12f/0x240 legacy_get_tree+0x24/0x40 vfs_get_tree+0x22/0xb0 vfs_kern_mount.part.0+0x71/0xb0 btrfs_mount+0x10d/0x380 ? vfs_parse_fs_string+0x4d/0x90 legacy_get_tree+0x24/0x40 vfs_get_tree+0x22/0xb0 path_mount+0x433/0xa10 __x64_sys_mount+0xe3/0x120 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae We can get -EIO or any number of legitimate errors from btrfs_search_slot(), panicing here is not the appropriate response. The error path for this code handles errors properly, simply return the error. Signed-off-by:
Josef Bacik <josef@toxicpanda.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-