- Sep 15, 2022
-
-
Isaac J. Manjarres authored
commit 25e9fbf0 upstream. Both __device_attach_driver() and __driver_attach() check the return code of the bus_type.match() function to see if the device needs to be added to the deferred probe list. After adding the device to the list, the logic attempts to bind the device to the driver anyway, as if the device had matched with the driver, which is not correct. If __device_attach_driver() detects that the device in question is not ready to match with a driver on the bus, then it doesn't make sense for the device to attempt to bind with the current driver or continue attempting to match with any of the other drivers on the bus. So, update the logic in __device_attach_driver() to reflect this. If __driver_attach() detects that a driver tried to match with a device that is not ready to match yet, then the driver should not attempt to bind with the device. However, the driver can still attempt to match and bind with other devices on the bus, as drivers can be bound to multiple devices. So, update the logic in __driver_attach() to reflect this. Fixes: 656b8035 ("ARM: 8524/1: driver cohandle -EPROBE_DEFER from bus_type.match()") Cc: stable@vger.kernel.org Cc: Saravana Kannan <saravanak@google.com> Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Saravana Kannan <saravanak@google.com> Signed-off-by:
Isaac J. Manjarres <isaacmanjarres@google.com> Link: https://lore.kernel.org/r/20220817184026.3468620-1-isaacmanjarres@google.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Krishna Kurapati authored
commit 9d4dc16e upstream. During cdrom emulation, the response to read_toc command must contain the cdrom address as the number of sectors (2048 byte sized blocks) represented either as an absolute value (when MSF bit is '0') or in terms of PMin/PSec/PFrame (when MSF bit is set to '1'). Incase of cdrom, the fsg_lun_open call sets the sector size to 2048 bytes. When MAC OS sends a read_toc request with MSF set to '1', the store_cdrom_address assumes that the address being provided is the LUN size represented in 512 byte sized blocks instead of 2048. It tries to modify the address further to convert it to 2048 byte sized blocks and store it in MSF format. This results in data transfer failures as the cdrom address being provided in the read_toc response is incorrect. Fixes: 3f565a36 ("usb: gadget: storage: adapt logic block size to bound block devices") Cc: stable@vger.kernel.org Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
Krishna Kurapati <quic_kriskura@quicinc.com> Link: https://lore.kernel.org/r/1661570110-19127-1-git-send-email-quic_kriskura@quicinc.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alan Stern authored
commit 9c6d7788 upstream. Automatic kernel fuzzing revealed a recursive locking violation in usb-storage: ============================================ WARNING: possible recursive locking detected 5.18.0 #3 Not tainted -------------------------------------------- kworker/1:3/1205 is trying to acquire lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 but task is already holding lock: ffff888018638db8 (&us_interface_key[i]){+.+.}-{3:3}, at: usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 ... stack backtrace: CPU: 1 PID: 1205 Comm: kworker/1:3 Not tainted 5.18.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Workqueue: usb_hub_wq hub_event Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 print_deadlock_bug kernel/locking/lockdep.c:2988 [inline] check_deadlock kernel/locking/lockdep.c:3031 [inline] validate_chain kernel/locking/lockdep.c:3816 [inline] __lock_acquire.cold+0x152/0x3ca kernel/locking/lockdep.c:5053 lock_acquire kernel/locking/lockdep.c:5665 [inline] lock_acquire+0x1ab/0x520 kernel/locking/lockdep.c:5630 __mutex_lock_common kernel/locking/mutex.c:603 [inline] __mutex_lock+0x14f/0x1610 kernel/locking/mutex.c:747 usb_stor_pre_reset+0x35/0x40 drivers/usb/storage/usb.c:230 usb_reset_device+0x37d/0x9a0 drivers/usb/core/hub.c:6109 r871xu_dev_remove+0x21a/0x270 drivers/staging/rtl8712/usb_intf.c:622 usb_unbind_interface+0x1bd/0x890 drivers/usb/core/driver.c:458 device_remove drivers/base/dd.c:545 [inline] device_remove+0x11f/0x170 drivers/base/dd.c:537 __device_release_driver drivers/base/dd.c:1222 [inline] device_release_driver_internal+0x1a7/0x2f0 drivers/base/dd.c:1248 usb_driver_release_interface+0x102/0x180 drivers/usb/core/driver.c:627 usb_forced_unbind_intf+0x4d/0xa0 drivers/usb/core/driver.c:1118 usb_reset_device+0x39b/0x9a0 drivers/usb/core/hub.c:6114 This turned out not to be an error in usb-storage but rather a nested device reset attempt. That is, as the rtl8712 driver was being unbound from a composite device in preparation for an unrelated USB reset (that driver does not have pre_reset or post_reset callbacks), its ->remove routine called usb_reset_device() -- thus nesting one reset call within another. Performing a reset as part of disconnect processing is a questionable practice at best. However, the bug report points out that the USB core does not have any protection against nested resets. Adding a reset_in_progress flag and testing it will prevent such errors in the future. Link: https://lore.kernel.org/all/CAB7eexKUpvX-JNiLzhXBDWgfg2T9e9_0Tw4HQ6keN==voRbP0g@mail.gmail.com/ Cc: stable@vger.kernel.org Reported-and-tested-by:
Rondreis <linhaoguo86@gmail.com> Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Link: https://lore.kernel.org/r/YwkflDxvg0KWqyZK@rowland.harvard.edu Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Josh Poimboeuf authored
commit c9305b6c upstream. Add proper alignment for .nospec_call_table and .nospec_return_table in vmlinux. [hca@linux.ibm.com]: The problem with the missing alignment of the nospec tables exist since a long time, however only since commit e6ed91fd ("s390/alternatives: remove padding generation code") and with CONFIG_RELOCATABLE=n the kernel may also crash at boot time. The above named commit reduced the size of struct alt_instr by one byte, so its new size is 11 bytes. Therefore depending on the number of cpu alternatives the size of the __alt_instructions array maybe odd, which again also causes that the addresses of the nospec tables will be odd. If the address of __nospec_call_start is odd and the kernel is compiled With CONFIG_RELOCATABLE=n the compiler may generate code that loads the address of __nospec_call_start with a 'larl' instruction. This will generate incorrect code since the 'larl' instruction only works with even addresses. In result the members of the nospec tables will be accessed with an off-by-one offset, which subsequently may lead to addressing exceptions within __nospec_revert(). Fixes: f19fbd5e ("s390: introduce execute-trampolines for branches") Signed-off-by:
Josh Poimboeuf <jpoimboe@kernel.org> Link: https://lore.kernel.org/r/8719bf1ce4a72ebdeb575200290094e9ce047bcc.1661557333.git.jpoimboe@kernel.org Cc: <stable@vger.kernel.org> # 4.16 Reviewed-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Heiko Carstens <hca@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Gerald Schaefer authored
commit 7c8d42fd upstream. The alignment check in prepare_hugepage_range() is wrong for 2 GB hugepages, it only checks for 1 MB hugepage alignment. This can result in kernel crash in __unmap_hugepage_range() at the BUG_ON(start & ~huge_page_mask(h)) alignment check, for mappings created with MAP_FIXED at unaligned address. Fix this by correctly handling multiple hugepage sizes, similar to the generic version of prepare_hugepage_range(). Fixes: d08de8e2 ("s390/mm: add support for 2GB hugepages") Cc: <stable@vger.kernel.org> # 4.8+ Acked-by:
Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by:
Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by:
Vasily Gorbik <gor@linux.ibm.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Witold Lipieta authored
commit 2aa48857 upstream. This is USB mass storage primary boot loader for code download on NXP PN7462AU. Without the quirk it is impossible to write whole memory at once as device restarts during the write due to bogus residue values reported. Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@kernel.org> Signed-off-by:
Witold Lipieta <witold.lipieta@thaumatec.com> Link: https://lore.kernel.org/r/20220809112911.462776-1-witold.lipieta@thaumatec.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thierry GUIBERT authored
commit a10bc717 upstream. Supports for ICOM F3400 and ICOM F4400 PMR radios in CDC-ACM driver enabling the AT serial port. The Vendor Id is 0x0C26 The Product ID is 0x0020 Output of lsusb : Bus 001 Device 009: ID 0c26:0020 Prolific Technology Inc. ICOM Radio Couldn't open device, some information will be missing Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 2 Communications bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0c26 Prolific Technology Inc. idProduct 0x0020 bcdDevice 0.00 iManufacturer 1 ICOM Inc. iProduct 2 ICOM Radio iSerial 3 *obfuscated* bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 0x0030 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 2 Communications bInterfaceSubClass 2 Abstract (modem) bInterfaceProtocol 1 AT-commands (v.25ter) iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x83 EP 3 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0040 1x 64 bytes bInterval 12 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 10 CDC Data bInterfaceSubClass 0 bInterfaceProtocol 0 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Signed-off-by:
Thierry GUIBERT <thierry.guibert@croix-rouge.fr> Cc: stable <stable@kernel.org> Link: https://lore.kernel.org/r/20220819081702.84118-1-thierry.guibert@croix-rouge.fr Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Heiner Kallweit authored
commit f9b995b4 upstream. Since 1599069a ("phy: core: Warn when phy_power_on is called before phy_init") the driver complains. In my case (Amlogic SoC) the warning is: phy phy-fe03e000.phy.2: phy_power_on was called before phy_init So change the order of the two calls. The same change has to be done to the order of phy_exit() and phy_power_off(). Fixes: 09a75e85 ("usb: dwc2: refactor common low-level hw code to platform.c") Cc: stable@vger.kernel.org Acked-by:
Minas Harutyunyan <hminas@synopsys.com> Acked-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/dfcc6b40-2274-4e86-e73c-5c5e6aa3e046@gmail.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Pablo Sun authored
commit c1e5c2f0 upstream. Fix incorrect pin assignment values when connecting to a monitor with Type-C receptacle instead of a plug. According to specification, an UFP_D receptacle's pin assignment should came from the UFP_D pin assignments field (bit 23:16), while an UFP_D plug's assignments are described in the DFP_D pin assignments (bit 15:8) during Mode Discovery. For example the LG 27 UL850-W is a monitor with Type-C receptacle. The monitor responds to MODE DISCOVERY command with following DisplayPort Capability flag: dp->alt->vdo=0x140045 The existing logic only take cares of UPF_D plug case, and would take the bit 15:8 for this 0x140045 case. This results in an non-existing pin assignment 0x0 in dp_altmode_configure. To fix this problem a new set of macros are introduced to take plug/receptacle differences into consideration. Fixes: 0e3bb7d6 ("usb: typec: Add driver for DisplayPort alternate mode") Cc: stable@vger.kernel.org Co-developed-by:
Pablo Sun <pablo.sun@mediatek.com> Co-developed-by:
Macpaul Lin <macpaul.lin@mediatek.com> Reviewed-by:
Guillaume Ranquet <granquet@baylibre.com> Reviewed-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
Pablo Sun <pablo.sun@mediatek.com> Signed-off-by:
Macpaul Lin <macpaul.lin@mediatek.com> Link: https://lore.kernel.org/r/20220804034803.19486-1-macpaul.lin@mediatek.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Slark Xiao authored
commit 8ffe20d0 upstream. We added PIDs for MV32-WA/WB MBIM mode before, now we need to add support for RmNet mode. Test evidence as below: T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f3 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F3 USB Mobile Broadband S: SerialNumber=d7b4be8d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=03 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=1e2d ProdID=00f4 Rev=05.04 S: Manufacturer=Cinterion S: Product=Cinterion PID 0x00F4 USB Mobile Broadband S: SerialNumber=d095087d C: #Ifs= 4 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=50 Driver=qmi_wwan I: If#=0x1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option I: If#=0x3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option Signed-off-by:
Slark Xiao <slark_xiao@163.com> [ johan: sort entries ] Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yonglin Tan authored
commit f766f3ab upstream. Add usb product id entry for the Quectel EM060K module. "MBIM mode": DIAG + NMEA + AT + MODEM + MBIM + QDSS T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030b Rev= 5.04 S: Manufacturer=Quectel S: Product=EM060K-GL S: SerialNumber=89fb57db C:* #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 8 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=40 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 8 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 9 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 9 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=8e(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#=12 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=70 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by:
Yonglin Tan <yonglin.tan@outlook.com> [ johan: mention QDSS port and sort entries ] Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yan Xinyu authored
commit 8d5fc280 upstream. Add support for OPPO R11 USB diag serial port to option driver. This phone uses Qualcomm Snapdragon 660 SoC. usb-devices output: T: Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 10 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=22d9 ProdID=276c Rev=04.04 S: Manufacturer=OPPO S: Product=SDM660-MTP _SN:09C6BCA7 S: SerialNumber=beb2c403 C: #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=500mA I: If#=0x0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=30 Driver=option I: If#=0x1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=usbfs Signed-off-by:
Yan Xinyu <sdlyyxy@bupt.edu.cn> Link: https://lore.kernel.org/r/20220714102037.4113889-1-sdlyyxy@bupt.edu.cn Link: https://lore.kernel.org/r/Yt1WfSZk03Plpnan@hovoldconsulting.com Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit ceb40384 upstream. Add the device id for Decagon Devices USB Cable Adapter. Link: https://lore.kernel.org/r/trinity-819f9db2-d3e1-40e9-a669-9c245817c046-1661523546680@msvc-mesg-web108 Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit 33e32158 upstream. After xHC controller is started, either in probe or resume, it can take a while before any of the connected usb devices are visible to the roothub due to link training. It's possible xhci driver loads, sees no acivity and suspends the host before the USB device is visible. In one testcase with a hotplugged xHC controller the host finally detected the connected USB device and generated a wake 500ms after host initial start. If hosts didn't suspend the device duringe training it probablty wouldn't take up to 500ms to detect it, but looking at specs reveal USB3 link training has a couple long timeout values, such as 120ms RxDetectQuietTimeout, and 360ms PollingLFPSTimeout. So Add a 500ms grace period that keeps polling the roothub for 500ms after start, preventing runtime suspend until USB devices are detected. Cc: stable@vger.kernel.org Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20220825150840.132216-3-mathias.nyman@linux.intel.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mika Westerberg authored
commit eb100b8f upstream. The received notification packet is held in pkg->buffer and not in pkg itself. Fix this by using the correct buffer. Fixes: 81a54b5e ("thunderbolt: Let the connection manager handle all notifications") Cc: stable@vger.kernel.org Signed-off-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Haibo Chen authored
[ Upstream commit 518e26f1 ] The regcache sync will set the cache_bypass = true, at that time, when there is regmap write operation, it will bypass the regmap cache, then the regcache sync will write back the value from cache to register, which is not as our expectation. Though regmap already use its internal lock to avoid such issue, but this driver force disable the regmap internal lock in its regmap config: disable_locking = true To avoid this issue, use the driver's own lock to do the protect in system PM. Fixes: b7657430 ("gpio: pca953x: Restore registers after suspend/resume cycle") Signed-off-by:
Haibo Chen <haibo.chen@nxp.com> Signed-off-by:
Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Armin Wolf authored
[ Upstream commit f233d2be ] The driver does not check if the cooling state passed to gpio_fan_set_cur_state() exceeds the maximum cooling state as stored in fan_data->num_speeds. Since the cooling state is later used as an array index in set_fan_speed(), an array out of bounds access can occur. This can be exploited by setting the state of the thermal cooling device to arbitrary values, causing for example a kernel oops when unavailable memory is accessed this way. Example kernel oops: [ 807.987276] Unable to handle kernel paging request at virtual address ffffff80d0588064 [ 807.987369] Mem abort info: [ 807.987398] ESR = 0x96000005 [ 807.987428] EC = 0x25: DABT (current EL), IL = 32 bits [ 807.987477] SET = 0, FnV = 0 [ 807.987507] EA = 0, S1PTW = 0 [ 807.987536] FSC = 0x05: level 1 translation fault [ 807.987570] Data abort info: [ 807.987763] ISV = 0, ISS = 0x00000005 [ 807.987801] CM = 0, WnR = 0 [ 807.987832] swapper pgtable: 4k pages, 39-bit VAs, pgdp=0000000001165000 [ 807.987872] [ffffff80d0588064] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 807.987961] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 807.987992] Modules linked in: cmac algif_hash aes_arm64 algif_skcipher af_alg bnep hci_uart btbcm bluetooth ecdh_generic ecc 8021q garp stp llc snd_soc_hdmi_codec brcmfmac vc4 brcmutil cec drm_kms_helper snd_soc_core cfg80211 snd_compress bcm2835_codec(C) snd_pcm_dmaengine syscopyarea bcm2835_isp(C) bcm2835_v4l2(C) sysfillrect v4l2_mem2mem bcm2835_mmal_vchiq(C) raspberrypi_hwmon sysimgblt videobuf2_dma_contig videobuf2_vmalloc fb_sys_fops videobuf2_memops rfkill videobuf2_v4l2 videobuf2_common i2c_bcm2835 snd_bcm2835(C) videodev snd_pcm snd_timer snd mc vc_sm_cma(C) gpio_fan uio_pdrv_genirq uio drm fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6 [ 807.988508] CPU: 0 PID: 1321 Comm: bash Tainted: G C 5.15.56-v8+ #1575 [ 807.988548] Hardware name: Raspberry Pi 3 Model B Rev 1.2 (DT) [ 807.988574] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 807.988608] pc : set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.988654] lr : gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.988691] sp : ffffffc008cf3bd0 [ 807.988710] x29: ffffffc008cf3bd0 x28: ffffff80019edac0 x27: 0000000000000000 [ 807.988762] x26: 0000000000000000 x25: 0000000000000000 x24: ffffff800747c920 [ 807.988787] x23: 000000000000000a x22: ffffff800369f000 x21: 000000001999997c [ 807.988854] x20: ffffff800369f2e8 x19: ffffff8002ae8080 x18: 0000000000000000 [ 807.988877] x17: 0000000000000000 x16: 0000000000000000 x15: 000000559e271b70 [ 807.988938] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 807.988960] x11: 0000000000000000 x10: ffffffc008cf3c20 x9 : ffffffcfb60c741c [ 807.989018] x8 : 000000000000000a x7 : 00000000ffffffc9 x6 : 0000000000000009 [ 807.989040] x5 : 000000000000002a x4 : 0000000000000000 x3 : ffffff800369f2e8 [ 807.989062] x2 : 000000000000e780 x1 : 0000000000000001 x0 : ffffff80d0588060 [ 807.989084] Call trace: [ 807.989091] set_fan_speed.part.5+0x34/0x80 [gpio_fan] [ 807.989113] gpio_fan_set_cur_state+0x34/0x50 [gpio_fan] [ 807.989199] cur_state_store+0x84/0xd0 [ 807.989221] dev_attr_store+0x20/0x38 [ 807.989262] sysfs_kf_write+0x4c/0x60 [ 807.989282] kernfs_fop_write_iter+0x130/0x1c0 [ 807.989298] new_sync_write+0x10c/0x190 [ 807.989315] vfs_write+0x254/0x378 [ 807.989362] ksys_write+0x70/0xf8 [ 807.989379] __arm64_sys_write+0x24/0x30 [ 807.989424] invoke_syscall+0x4c/0x110 [ 807.989442] el0_svc_common.constprop.3+0xfc/0x120 [ 807.989458] do_el0_svc+0x2c/0x90 [ 807.989473] el0_svc+0x24/0x60 [ 807.989544] el0t_64_sync_handler+0x90/0xb8 [ 807.989558] el0t_64_sync+0x1a0/0x1a4 [ 807.989579] Code: b9403801 f9402800 7100003f 8b35cc00 (b9400416) [ 807.989627] ---[ end trace 8ded4c918658445b ]--- Fix this by checking the cooling state and return an error if it exceeds the maximum cooling state. Tested on a Raspberry Pi 3. Fixes: b5cf88e4 ("(gpio-fan): Add thermal control hooks") Signed-off-by:
Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20220830011101.178843-1-W_Armin@gmx.de Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Stefan Wahren authored
[ Upstream commit 35f73cca ] The function raspberrypi_fw_get_rate (e.g. used for the recalc_rate hook) can fail to get the clock rate from the firmware. In this case we cannot return a signed error value, which would be casted to unsigned long. Fix this by returning 0 instead. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Link: https://lore.kernel.org/r/20220625083643.4012-1-stefan.wahren@i2se.com Fixes: 4e85e535 ("clk: bcm283x: add driver interfacing with Raspberry Pi's firmware") Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Peter Robinson authored
[ Upstream commit 99077ad6 ] Add the module alias so the rk805-pwrkey driver will autoload when built as a module. Fixes: 5a35b85c ("Input: add power key driver for Rockchip RK805 PMIC") Signed-off-by:
Peter Robinson <pbrobinson@gmail.com> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://lore.kernel.org/r/20220612225437.3628788-1-pbrobinson@gmail.com Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chen-Yu Tsai authored
[ Upstream commit 4b592061 ] In the original commit 9a34b453 ("clk: Add support for runtime PM"), the commit message mentioned that pm_runtime_put_sync() would be done at the end of clk_core_unprepare(). This mirrors the operations in clk_core_prepare() in the opposite order. However, the actual code that was added wasn't in the order the commit message described. Move clk_pm_runtime_put() to the end of clk_core_unprepare() so that it is in the correct order. Fixes: 9a34b453 ("clk: Add support for runtime PM") Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220822081424.1310926-3-wenst@chromium.org Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Stephen Boyd authored
[ Upstream commit abb5f3f4 ] This reverts commit 35b0fac8 . Alexander reports that it causes boot failures on i.MX8M Plus based boards (specifically imx8mp-tqma8mpql-mba8mpxl.dts). Reported-by:
Alexander Stein <alexander.stein@ew.tq-group.com> Cc: Chen-Yu Tsai <wenst@chromium.org> Fixes: 35b0fac8 ("clk: core: Honor CLK_OPS_PARENT_ENABLE for clk gate ops") Link: https://lore.kernel.org/r/12115951.O9o76ZdvQC@steina-w Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20220831175326.2523912-1-sboyd@kernel.org Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Chen-Yu Tsai authored
[ Upstream commit 35b0fac8 ] In the previous commits that added CLK_OPS_PARENT_ENABLE, support for this flag was only added to rate change operations (rate setting and reparent) and disabling unused subtree. It was not added to the clock gate related operations. Any hardware driver that needs it for these operations will either see bogus results, or worse, hang. This has been seen on MT8192 and MT8195, where the imp_ii2_* clk drivers set this, but dumping debugfs clk_summary would cause it to hang. Fixes: fc8726a2 ("clk: core: support clocks which requires parents enable (part 2)") Fixes: a4b3518d ("clk: core: support clocks which requires parents enable (part 1)") Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Tested-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20220822081424.1310926-2-wenst@chromium.org Signed-off-by:
Stephen Boyd <sboyd@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Colin Ian King authored
[ Upstream commit 233f5674 ] There is a spelling mistake in a gvt_vgpu_err error message. Fix it. Fixes: 695fbc08 ("drm/i915/gvt: replace the gvt_err with gvt_vgpu_err") Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
Zhi Wang <zhi.a.wang@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20220315202449.2952845-1-colin.i.king@gmail.com Reviewed-by:
Zhi Wang <zhi.a.wang@intel.com> Signed-off-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Johan Hovold authored
[ Upstream commit a872ab30 ] The Qualcomm dwc3 runtime-PM implementation checks the xhci platform-device pointer in the wakeup-interrupt handler to determine whether the controller is in host mode and if so triggers a resume. After a role switch in OTG mode the xhci platform-device would have been freed and the next wakeup from runtime suspend would access the freed memory. Note that role switching is executed from a freezable workqueue, which guarantees that the pointer is stable during suspend. Also note that runtime PM has been broken since commit 2664deb0 ("usb: dwc3: qcom: Honor wakeup enabled/disabled state"), which incidentally also prevents this issue from being triggered. Fixes: a4333c3a ("usb: dwc3: Add Qualcomm DWC3 glue driver") Cc: stable@vger.kernel.org # 4.18 Reviewed-by:
Matthias Kaehlcke <mka@chromium.org> Reviewed-by:
Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220804151001.23612-5-johan+linaro@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Carlos Llamas authored
commit a0e44c64 upstream. A transaction of type BINDER_TYPE_WEAK_HANDLE can fail to increment the reference for a node. In this case, the target proc normally releases the failed reference upon close as expected. However, if the target is dying in parallel the call will race with binder_deferred_release(), so the target could have released all of its references by now leaving the cleanup of the new failed reference unhandled. The transaction then ends and the target proc gets released making the ref->proc now a dangling pointer. Later on, ref->node is closed and we attempt to take spin_lock(&ref->proc->inner_lock), which leads to the use-after-free bug reported below. Let's fix this by cleaning up the failed reference on the spot instead of relying on the target to do so. ================================================================== BUG: KASAN: use-after-free in _raw_spin_lock+0xa8/0x150 Write of size 4 at addr ffff5ca207094238 by task kworker/1:0/590 CPU: 1 PID: 590 Comm: kworker/1:0 Not tainted 5.19.0-rc8 #10 Hardware name: linux,dummy-virt (DT) Workqueue: events binder_deferred_func Call trace: dump_backtrace.part.0+0x1d0/0x1e0 show_stack+0x18/0x70 dump_stack_lvl+0x68/0x84 print_report+0x2e4/0x61c kasan_report+0xa4/0x110 kasan_check_range+0xfc/0x1a4 __kasan_check_write+0x3c/0x50 _raw_spin_lock+0xa8/0x150 binder_deferred_func+0x5e0/0x9b0 process_one_work+0x38c/0x5f0 worker_thread+0x9c/0x694 kthread+0x188/0x190 ret_from_fork+0x10/0x20 Acked-by:
Christian Brauner (Microsoft) <brauner@kernel.org> Signed-off-by:
Carlos Llamas <cmllamas@google.com> Cc: stable <stable@kernel.org> # 4.14+ Link: https://lore.kernel.org/r/20220801182511.3371447-1-cmllamas@google.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Niek Nooijens authored
commit 001047ea upstream. works perfectly with: modprobe ftdi_sio echo "0590 00b2" | tee /sys/module/ftdi_sio/drivers/usb-serial\:ftdi_sio/new_id > /dev/null but doing this every reboot is a pain in the ass. Signed-off-by:
Niek Nooijens <niek.nooijens@omron.com> Cc: stable@vger.kernel.org Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit d245f43a upstream. The probe session-duplication overflow check incremented the session count also when there were no more available sessions so that memory beyond the fixed-size slab-allocated session array could be corrupted in fastrpc_session_alloc() on open(). Fixes: f6f9279f ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable@vger.kernel.org # 5.1 Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220829080531.29681-3-johan+linaro@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit 9baa1415 upstream. Add the missing sanity check on the probed-session count to avoid corrupting memory beyond the fixed-size slab-allocated session array when there are more than FASTRPC_MAX_SESSIONS sessions defined in the devicetree. Fixes: f6f9279f ("misc: fastrpc: Add Qualcomm fastrpc basic driver model") Cc: stable@vger.kernel.org # 5.1 Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Link: https://lore.kernel.org/r/20220829080531.29681-2-johan+linaro@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marcus Folkesson authored
commit 9e2238e3 upstream. The ADC conversion is actually not rail-to-rail but with a factor 1.5. Make use of this factor when calculating actual voltage. Fixes: 3a89b289 ("iio: adc: add support for mcp3911") Signed-off-by:
Marcus Folkesson <marcus.folkesson@gmail.com> Reviewed-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20220722130726.7627-4-marcus.folkesson@gmail.com Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tetsuo Handa authored
commit 98e01215 upstream. syzbot is reporting hung task at __input_unregister_device() [1], for iforce_close() waiting at wait_event_interruptible() with dev->mutex held is blocking input_disconnect_device() from __input_unregister_device(). It seems that the cause is simply that commit c2b27ef6 ("Input: iforce - wait for command completion when closing the device") forgot to call wake_up() after clear_bit(). Fix this problem by introducing a helper that calls clear_bit() followed by wake_up_all(). Reported-by:
syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com> Fixes: c2b27ef6 ("Input: iforce - wait for command completion when closing the device") Tested-by:
syzbot <syzbot+deb6abc36aad4008f407@syzkaller.appspotmail.com> Suggested-by:
Fabio M. De Francesco <fmdefrancesco@gmail.com> Co-developed-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Hillf Danton <hdanton@sina.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Link: https://lore.kernel.org/r/887021c3-4f13-40ce-c8b9-aa6e09faa3a7@I-love.SAKURA.ne.jp Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sherry Sun authored
commit d5a2e083 upstream. When the user initializes the uart port, and waits for the transmit engine to complete in lpuart32_set_termios(), if the UART TX fifo has dirty data and the UARTMODIR enable the flow control, the TX fifo may never be empty. So here we should disable the flow control first to make sure the transmit engin can complete. Fixes: 380c966c ("tty: serial: fsl_lpuart: add 32-bit register interface support") Cc: stable <stable@kernel.org> Signed-off-by:
Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/20220821101527.10066-1-sherry.sun@nxp.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 566f9c9f upstream. When changing the console font with ioctl(KDFONTOP) the new font size can be bigger than the previous font. A previous selection may thus now be outside of the new screen size and thus trigger out-of-bounds accesses to graphics memory if the selection is removed in vc_do_resize(). Prevent such out-of-memory accesses by dropping the selection before the various con_font_set() console handlers are called. Reported-by:
<syzbot+14b0e8f3fd1612e35350@syzkaller.appspotmail.com> Cc: stable <stable@kernel.org> Tested-by:
Khalid Masum <khalid.masum.92@gmail.com> Signed-off-by:
Helge Deller <deller@gmx.de> Link: https://lore.kernel.org/r/YuV9apZGNmGfjcor@p100 Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Masahiro Yamada authored
commit c7acee3d upstream. Christophe Leroy reported that commit 7b453719 ("kbuild: link symbol CRCs at final link, removing CONFIG_MODULE_REL_CRCS") broke mpc85xx_defconfig + CONFIG_RELOCATABLE=y. LD vmlinux SYSMAP System.map SORTTAB vmlinux CHKREL vmlinux WARNING: 451 bad relocations c0b312a9 R_PPC_UADDR32 .head.text-0x3ff9ed54 c0b312ad R_PPC_UADDR32 .head.text-0x3ffac224 c0b312b1 R_PPC_UADDR32 .head.text-0x3ffb09f4 c0b312b5 R_PPC_UADDR32 .head.text-0x3fe184dc c0b312b9 R_PPC_UADDR32 .head.text-0x3fe183a8 ... The compiler emits a bunch of R_PPC_UADDR32, which is not supported by arch/powerpc/kernel/reloc_32.S. The reason is there exists an unaligned symbol. $ powerpc-linux-gnu-nm -n vmlinux ... c0b31258 d spe_aligninfo c0b31298 d __func__.0 c0b312a9 D sys_call_table c0b319b8 d __func__.0 Commit 7b453719 is not the root cause. Even before that, I can reproduce the same issue for mpc85xx_defconfig + CONFIG_RELOCATABLE=y + CONFIG_MODVERSIONS=n. It is just that nobody noticed because when CONFIG_MODVERSIONS is enabled, a __crc_* symbol inserted before sys_call_table was hiding the unalignment issue. Adding alignment to the syscall table for ppc32 fixes the issue. Cc: stable@vger.kernel.org Reported-by:
Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Tested-by:
Christophe Leroy <christophe.leroy@csgroup.eu> [mpe: Trim change log discussion, add Cc stable] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/lkml/38605f6a-a568-f884-f06f-ea4da5b214f0@csgroup.eu/ Link: https://lore.kernel.org/r/20220820165129.1147589-1-masahiroy@kernel.org Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dan Carpenter authored
commit e230a445 upstream. _Read/Write_MACREG callbacks are NULL so the read/write_macreg_hdl() functions don't do anything except free the "pcmd" pointer. It results in a use after free. Delete them. Fixes: 2865d42c ("staging: r8712u: Add the new driver to the mainline kernel") Cc: stable <stable@kernel.org> Reported-by:
Zheng Wang <hackerzheng666@gmail.com> Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/Yw4ASqkYcUhUfoY2@kili Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Shenwei Wang authored
commit 846651ec upstream. The setting of RS485 RTS polarity is inverse in the current driver. When the property of 'rs485-rts-active-low' is enabled in the dts node, the RTS signal should be LOW during sending. Otherwise, if there is no such a property, the RTS should be HIGH during sending. Fixes: 03895cf4 ("tty: serial: fsl_lpuart: Add support for RS-485") Cc: stable <stable@kernel.org> Signed-off-by:
Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by:
Shenwei Wang <shenwei.wang@nxp.com> Link: https://lore.kernel.org/r/20220805144529.604856-1-shenwei.wang@nxp.com Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yacan Liu authored
[ Upstream commit a8424a9b ] For passive connections, the refcount increment has been done in smc_clcsock_accept()-->smc_sock_alloc(). Fixes: 3b2dec26 ("net/smc: restructure client and server code in af_smc") Signed-off-by:
Yacan Liu <liuyacan@corp.netease.com> Reviewed-by:
Tony Lu <tonylu@linux.alibaba.com> Link: https://lore.kernel.org/r/20220830152314.838736-1-liuyacan@corp.netease.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Jakub Kicinski authored
[ Upstream commit 0b4f688d ] This reverts commit 90fabae8. Patch was applied hastily, revert and let the v2 be reviewed. Fixes: 90fabae8 ("sch_cake: Return __NET_XMIT_STOLEN when consuming enqueued skb") Link: https://lore.kernel.org/all/87wnao2ha3.fsf@toke.dk/ Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 8c705212 ] challenge_timestamp can be read an written by concurrent threads. This was expected, but we need to annotate the race to avoid potential issues. Following patch moves challenge_timestamp and challenge_count to per-netns storage to provide better isolation. Fixes: 354e4aa3 ("tcp: RFC 5961 5.2 Blind Data Injection Attack Mitigation") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Toke Høiland-Jørgensen authored
[ Upstream commit 90fabae8 ] When the GSO splitting feature of sch_cake is enabled, GSO superpackets will be broken up and the resulting segments enqueued in place of the original skb. In this case, CAKE calls consume_skb() on the original skb, but still returns NET_XMIT_SUCCESS. This can confuse parent qdiscs into assuming the original skb still exists, when it really has been freed. Fix this by adding the __NET_XMIT_STOLEN flag to the return value in this case. Fixes: 0c850344 ("sch_cake: Conditionally split GSO segments") Signed-off-by:
Toke Høiland-Jørgensen <toke@toke.dk> Reported-by: zdi-disclosures@trendmicro.com # ZDI-CAN-18231 Link: https://lore.kernel.org/r/20220831092103.442868-1-toke@toke.dk Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Cong Wang authored
[ Upstream commit 8fc29ff3 ] strp_init() is called just a few lines above this csk->sk_user_data check, it also initializes strp->work etc., therefore, it is unnecessary to call strp_done() to cancel the freshly initialized work. And if sk_user_data is already used by KCM, psock->strp should not be touched, particularly strp->work state, so we need to move strp_init() after the csk->sk_user_data check. This also makes a lockdep warning reported by syzbot go away. Reported-and-tested-by:
<syzbot+9fc084a4348493ef65d2@syzkaller.appspotmail.com> Reported-by:
<syzbot+e696806ef96cdd2d87cd@syzkaller.appspotmail.com> Fixes: e5571240 ("kcm: Check if sk_user_data already set in kcm_attach") Fixes: dff8baa2 ("kcm: Call strp_stop before strp_done in kcm_attach") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Link: https://lore.kernel.org/r/20220827181314.193710-1-xiyou.wangcong@gmail.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-