- Jan 26, 2024
-
-
Pablo Neira Ayuso authored
commit 51edb2ff upstream. This should check for NULL in case memory allocation fails. Reported-by:
Julian Wiedmann <jwiedmann.dev@gmail.com> Fixes: 3b9e2ea6 ("netfilter: nft_limit: move stateful fields out of expression data") Fixes: 37f319f3 ("netfilter: nft_connlimit: move stateful fields out of expression data") Fixes: 33a24de3 ("netfilter: nft_last: move stateful fields out of expression data") Fixes: ed0a0c60 ("netfilter: nft_quota: move stateful fields out of expression data") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Link: https://lore.kernel.org/r/20220110194817.53481-1-pablo@netfilter.org Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matthew Wilcox (Oracle) authored
commit 1b151e24 upstream. The special casing was originally added in pre-git history; reproducing the commit log here: > commit a318a92567d77 > Author: Andrew Morton <akpm@osdl.org> > Date: Sun Sep 21 01:42:22 2003 -0700 > > [PATCH] Speed up direct-io hugetlbpage handling > > This patch short-circuits all the direct-io page dirtying logic for > higher-order pages. Without this, we pointlessly bounce BIOs up to > keventd all the time. In the last twenty years, compound pages have become used for more than just hugetlb. Rewrite these functions to operate on folios instead of pages and remove the special case for hugetlbfs; I don't think it's needed any more (and if it is, we can put it back in as a call to folio_test_hugetlb()). This was found by inspection; as far as I can tell, this bug can lead to pages used as the destination of a direct I/O read not being marked as dirty. If those pages are then reclaimed by the MM without being dirtied for some other reason, they won't be written out. Then when they're faulted back in, they will not contain the data they should. It'll take a pretty unusual setup to produce this problem with several races all going the wrong way. This problem predates the folio work; it could for example have been triggered by mmaping a THP in tmpfs and using that as the target of an O_DIRECT read. Fixes: 800d8c63 ("shmem: add huge pages support") Cc: <stable@vger.kernel.org> Signed-off-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marek Szyprowski authored
[ Upstream commit 990489e1 ] To properly handle ACK on the bus when transferring more than one message in polling mode, move the polling handling loop from s3c24xx_i2c_message_start() to s3c24xx_i2c_doxfer(). This way i2c_s3c_irq_nextbyte() is always executed till the end, properly acknowledging the IRQ bits and no recursive calls to i2c_s3c_irq_nextbyte() are made. While touching this, also fix finishing transfers in polling mode by using common code path and always waiting for the bus to become idle and disabled. Fixes: 117053f7 ("i2c: s3c2410: Add polling mode support") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Andi Shyti <andi.shyti@kernel.org> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Marek Szyprowski authored
[ Upstream commit 0d9cf23e ] To properly handle read transfers in polling mode, no waiting for the ACK state is needed as it will never come. Just wait a bit to ensure start state is on the bus and continue processing next bytes. Fixes: 117053f7 ("i2c: s3c2410: Add polling mode support") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by:
Chanho Park <chanho61.park@samsung.com> Reviewed-by:
Andi Shyti <andi.shyti@kernel.org> Signed-off-by:
Wolfram Sang <wsa@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nikita Zhandarovich authored
[ Upstream commit 2e7ef287 ] idev->mc_ifc_count can be written over without proper locking. Originally found by syzbot [1], fix this issue by encapsulating calls to mld_ifc_stop_work() (and mld_gq_stop_work() for good measure) with mutex_lock() and mutex_unlock() accordingly as these functions should only be called with mc_lock per their declarations. [1] BUG: KCSAN: data-race in ipv6_mc_down / mld_ifc_work write to 0xffff88813a80c832 of 1 bytes by task 3771 on cpu 0: mld_ifc_stop_work net/ipv6/mcast.c:1080 [inline] ipv6_mc_down+0x10a/0x280 net/ipv6/mcast.c:2725 addrconf_ifdown+0xe32/0xf10 net/ipv6/addrconf.c:3949 addrconf_notify+0x310/0x980 notifier_call_chain kernel/notifier.c:93 [inline] raw_notifier_call_chain+0x6b/0x1c0 kernel/notifier.c:461 __dev_notify_flags+0x205/0x3d0 dev_change_flags+0xab/0xd0 net/core/dev.c:8685 do_setlink+0x9f6/0x2430 net/core/rtnetlink.c:2916 rtnl_group_changelink net/core/rtnetlink.c:3458 [inline] __rtnl_newlink net/core/rtnetlink.c:3717 [inline] rtnl_newlink+0xbb3/0x1670 net/core/rtnetlink.c:3754 rtnetlink_rcv_msg+0x807/0x8c0 net/core/rtnetlink.c:6558 netlink_rcv_skb+0x126/0x220 net/netlink/af_netlink.c:2545 rtnetlink_rcv+0x1c/0x20 net/core/rtnetlink.c:6576 netlink_unicast_kernel net/netlink/af_netlink.c:1342 [inline] netlink_unicast+0x589/0x650 net/netlink/af_netlink.c:1368 netlink_sendmsg+0x66e/0x770 net/netlink/af_netlink.c:1910 ... write to 0xffff88813a80c832 of 1 bytes by task 22 on cpu 1: mld_ifc_work+0x54c/0x7b0 net/ipv6/mcast.c:2653 process_one_work kernel/workqueue.c:2627 [inline] process_scheduled_works+0x5b8/0xa30 kernel/workqueue.c:2700 worker_thread+0x525/0x730 kernel/workqueue.c:2781 ... Fixes: 2d9a93b4 ("mld: convert from timer to delayed work") Reported-by:
<syzbot+a9400cabb1d784e49abf@syzkaller.appspotmail.com> Link: https://lore.kernel.org/all/000000000000994e09060ebcdffb@google.com/ Signed-off-by:
Nikita Zhandarovich <n.zhandarovich@fintech.ru> Acked-by:
Taehee Yoo <ap420073@gmail.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20240117172102.12001-1-n.zhandarovich@fintech.ru Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Amit Cohen authored
[ Upstream commit b34f4de6 ] 'qos_pfc' test checks PFC behavior. The idea is to limit the traffic using a shaper somewhere in the flow of the packets. In this area, the buffer is smaller than the buffer at the beginning of the flow, so it fills up until there is no more space left. The test configures there PFC which is supposed to notice that the headroom is filling up and send PFC Xoff to indicate the transmitter to stop sending traffic for the priorities sharing this PG. The Xon/Xoff threshold is auto-configured and always equal to 2*(MTU rounded up to cell size). Even after sending the PFC Xoff packet, traffic will keep arriving until the transmitter receives and processes the PFC packet. This amount of traffic is known as the PFC delay allowance. Currently the buffer for the delay traffic is configured as 100KB. The MTU in the test is 10KB, therefore the threshold for Xoff is about 20KB. This allows 80KB extra to be stored in this buffer. 8-lane ports use two buffers among which the configured buffer is split, the Xoff threshold then applies to each buffer in parallel. The test does not take into account the behavior of 8-lane ports, when the ports are configured to 400Gbps with 8 lanes or 800Gbps with 8 lanes, packets are dropped and the test fails. Check if the relevant ports use 8 lanes, in such case double the size of the buffer, as the headroom is split half-half. Cc: Shuah Khan <shuah@kernel.org> Fixes: bfa80478 ("selftests: mlxsw: Add a PFC test") Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/23ff11b7dff031eb04a41c0f5254a2b636cd8ebb.1705502064.git.petrm@nvidia.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ido Schimmel authored
[ Upstream commit 483ae90d ] When tc filters are first added to a net device, the corresponding local port gets bound to an ACL group in the device. The group contains a list of ACLs. In turn, each ACL points to a different TCAM region where the filters are stored. During forwarding, the ACLs are sequentially evaluated until a match is found. One reason to place filters in different regions is when they are added with decreasing priorities and in an alternating order so that two consecutive filters can never fit in the same region because of their key usage. In Spectrum-2 and newer ASICs the firmware started to report that the maximum number of ACLs in a group is more than 16, but the layout of the register that configures ACL groups (PAGT) was not updated to account for that. It is therefore possible to hit stack corruption [1] in the rare case where more than 16 ACLs in a group are required. Fix by limiting the maximum ACL group size to the minimum between what the firmware reports and the maximum ACLs that fit in the PAGT register. Add a test case to make sure the machine does not crash when this condition is hit. [1] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120 [...] dump_stack_lvl+0x36/0x50 panic+0x305/0x330 __stack_chk_fail+0x15/0x20 mlxsw_sp_acl_tcam_group_update+0x116/0x120 mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110 mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fixes: c3ab4354 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Reported-by:
Orel Hagag <orelh@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Amit Cohen <amcohen@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/2d91c89afba59c22587b444994ae419dbea8d876.1705502064.git.petrm@nvidia.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ido Schimmel authored
[ Upstream commit 194ab947 ] Move the initialization and de-initialization code further below in order to avoid forward declarations in the next patch. No functional changes. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 483ae90d ("mlxsw: spectrum_acl_tcam: Fix stack corruption") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ido Schimmel authored
[ Upstream commit 61fe3b91 ] Move mutex_destroy() to the end to make the function symmetric with mlxsw_sp_acl_tcam_init(). No functional changes. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 483ae90d ("mlxsw: spectrum_acl_tcam: Fix stack corruption") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ido Schimmel authored
[ Upstream commit 65823e07 ] Pair mutex_init() with a mutex_destroy() in the error path. Found during code review. No functional changes. Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Stable-dep-of: 483ae90d ("mlxsw: spectrum_acl_tcam: Fix stack corruption") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit 2c087dfc ] Use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Stable-dep-of: 483ae90d ("mlxsw: spectrum_acl_tcam: Fix stack corruption") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Amit Cohen authored
[ Upstream commit 6d6eeabc ] Lately, a bug was found when many TC filters are added - at some point, several bugs are printed to dmesg [1] and the switch is crashed with segmentation fault. The issue starts when gen_pool_free() fails because of unexpected behavior - a try to free memory which is already freed, this leads to BUG() call which crashes the switch and makes many other bugs. Trying to track down the unexpected behavior led to a bug in eRP code. The function mlxsw_sp_acl_erp_table_alloc() gets a pointer to the allocated index, sets the value and returns an error code. When gen_pool_alloc() fails it returns address 0, we track it and return -ENOBUFS outside, BUT the call for gen_pool_alloc() already override the index in erp_table structure. This is a problem when such allocation is done as part of table expansion. This is not a new table, which will not be used in case of allocation failure. We try to expand eRP table and override the current index (non-zero) with zero. Then, it leads to an unexpected behavior when address 0 is freed twice. Note that address 0 is valid in erp_table->base_index and indeed other tables use it. gen_pool_alloc() fails in case that there is no space left in the pre-allocated pool, in our case, the pool is limited to ACL_MAX_ERPT_BANK_SIZE, which is read from hardware. When more than max erp entries are required, we exceed the limit and return an error, this error leads to "Failed to migrate vregion" print. Fix this by changing erp_table->base_index only in case of a successful allocation. Add a test case for such a scenario. Without this fix it causes segmentation fault: $ TESTS="max_erp_entries_test" ./tc_flower.sh ./tc_flower.sh: line 988: 1560 Segmentation fault tc filter del dev $h2 ingress chain $i protocol ip pref $i handle $j flower &>/dev/null [1]: kernel BUG at lib/genalloc.c:508! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 6 PID: 3531 Comm: tc Not tainted 6.7.0-rc5-custom-ga6893f479f5e #1 Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021 RIP: 0010:gen_pool_free_owner+0xc9/0xe0 ... Call Trace: <TASK> __mlxsw_sp_acl_erp_table_other_dec+0x70/0xa0 [mlxsw_spectrum] mlxsw_sp_acl_erp_mask_destroy+0xf5/0x110 [mlxsw_spectrum] objagg_obj_root_destroy+0x18/0x80 [objagg] objagg_obj_destroy+0x12c/0x130 [objagg] mlxsw_sp_acl_erp_mask_put+0x37/0x50 [mlxsw_spectrum] mlxsw_sp_acl_ctcam_region_entry_remove+0x74/0xa0 [mlxsw_spectrum] mlxsw_sp_acl_ctcam_entry_del+0x1e/0x40 [mlxsw_spectrum] mlxsw_sp_acl_tcam_ventry_del+0x78/0xd0 [mlxsw_spectrum] mlxsw_sp_flower_destroy+0x4d/0x70 [mlxsw_spectrum] mlxsw_sp_flow_block_cb+0x73/0xb0 [mlxsw_spectrum] tc_setup_cb_destroy+0xc1/0x180 fl_hw_destroy_filter+0x94/0xc0 [cls_flower] __fl_delete+0x1ac/0x1c0 [cls_flower] fl_destroy+0xc2/0x150 [cls_flower] tcf_proto_destroy+0x1a/0xa0 ... mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion Fixes: f465261a ("mlxsw: spectrum_acl: Implement common eRP core") Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/4cfca254dfc0e5d283974801a24371c7b6db5989.1705502064.git.petrm@nvidia.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Ludvig Pärsson authored
[ Upstream commit f1172f3e ] Accessing an ethernet device that is powered off or clock gated might cause the CPU to hang. Add ethnl_ops_begin/complete in ethnl_set_features() to protect against this. Fixes: 0980bfcd ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by:
Ludvig Pärsson <ludvig.parsson@axis.com> Link: https://lore.kernel.org/r/20240117-etht2-v2-1-1a96b6e8c650@axis.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Christophe JAILLET authored
[ Upstream commit 4f41d30c ] When appending "[defcmd]" to 'kdb_prompt_str', the size of the string already in the buffer should be taken into account. An option could be to switch from strncat() to strlcat() which does the correct test to avoid such an overflow. However, this actually looks as dead code, because 'defcmd_in_progress' can't be true here. See a more detailed explanation at [1]. [1]: https://lore.kernel.org/all/CAD=FV=WSh7wKN7Yp-3wWiDgX4E3isQ8uh0LCzTmd1v9Cg9j+nQ@mail.gmail.com/ Fixes: 5d5314d6 ("kdb: core for kgdb back end (1 of 2)") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Fedor Pchelkin authored
[ Upstream commit d6938c1c ] Inside decrement_ttl() upon discovering that the packet ttl has exceeded, __IP_INC_STATS and __IP6_INC_STATS macros can be called from preemptible context having the following backtrace: check_preemption_disabled: 48 callbacks suppressed BUG: using __this_cpu_add() in preemptible [00000000] code: curl/1177 caller is decrement_ttl+0x217/0x830 CPU: 5 PID: 1177 Comm: curl Not tainted 6.7.0+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0xbd/0xe0 check_preemption_disabled+0xd1/0xe0 decrement_ttl+0x217/0x830 __ip_vs_get_out_rt+0x4e0/0x1ef0 ip_vs_nat_xmit+0x205/0xcd0 ip_vs_in_hook+0x9b1/0x26a0 nf_hook_slow+0xc2/0x210 nf_hook+0x1fb/0x770 __ip_local_out+0x33b/0x640 ip_local_out+0x2a/0x490 __ip_queue_xmit+0x990/0x1d10 __tcp_transmit_skb+0x288b/0x3d10 tcp_connect+0x3466/0x5180 tcp_v4_connect+0x1535/0x1bb0 __inet_stream_connect+0x40d/0x1040 inet_stream_connect+0x57/0xa0 __sys_connect_file+0x162/0x1a0 __sys_connect+0x137/0x160 __x64_sys_connect+0x72/0xb0 do_syscall_64+0x6f/0x140 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7fe6dbbc34e0 Use the corresponding preemption-aware variants: IP_INC_STATS and IP6_INC_STATS. Found by Linux Verification Center (linuxtesting.org). Fixes: 8d8e20e2 ("ipvs: Decrement ttl") Signed-off-by:
Fedor Pchelkin <pchelkin@ispras.ru> Acked-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit 113661e0 ] It is still possible to set on the NFT_SET_CONCAT flag by specifying a set size and no field description, report EINVAL in such case. Fixes: 1b6345d4 ("netfilter: nf_tables: check NFT_SET_CONCAT flag if field_count is specified") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit 6b1ca88e ] Delete from packet path relies on the garbage collector to purge elements with NFT_SET_ELEM_DEAD_BIT on. Skip these dead elements from nf_tables_dump_setelem() path, I very rarely see tests/shell/testcases/maps/typeof_maps_add_delete reports [DUMP FAILED] showing a mismatch in the expected output with an element that should not be there. If the netlink dump happens before GC worker run, it might show dead elements in the ruleset listing. nft_rhash_get() already skips dead elements in nft_rhash_cmp(), therefore, it already does not show the element when getting a single element via netlink control plane. Fixes: 5f68718b ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit 3ce67e37 ] The set description provides the size of each field in the set whose sum should not mismatch the set key length, bail out otherwise. I did not manage to crash nft_set_pipapo with mismatch fields and set key length so far, but this is UB which must be disallowed. Fixes: f3a2181e ("netfilter: nf_tables: Support for sets with multiple ranged fields") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit 91a139ce ] Bail out if userspace provides unsupported flags, otherwise future extensions to the limit expression will be silently ignored by the kernel. Fixes: c7862a5f ("netfilter: nft_limit: allow to invert matching criteria") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Vasily Averin authored
[ Upstream commit 42193ffd ] nft_*.c files whose NFT_EXPR_STATEFUL flag is set on need to use __GFP_ACCOUNT flag for objects that are dynamically allocated from the packet path. Such objects are allocated inside nft_expr_ops->init() callbacks executed in task context while processing netlink messages. In addition, this patch adds accounting to nft_set_elem_expr_clone() used for the same purposes. Signed-off-by:
Vasily Averin <vvs@openvz.org> Acked-by:
Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Stable-dep-of: 91a139ce ("netfilter: nft_limit: do not ignore unsupported flags") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit 3b9e2ea6 ] In preparation for the rule blob representation. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Stable-dep-of: 91a139ce ("netfilter: nft_limit: do not ignore unsupported flags") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit 369b6cb5 ] From struct nft_limit to nft_limit_priv. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Stable-dep-of: 91a139ce ("netfilter: nft_limit: do not ignore unsupported flags") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit ed0a0c60 ] In preparation for the rule blob representation. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Stable-dep-of: 91a139ce ("netfilter: nft_limit: do not ignore unsupported flags") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit 33a24de3 ] In preparation for the rule blob representation. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Stable-dep-of: 91a139ce ("netfilter: nft_limit: do not ignore unsupported flags") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit 37f319f3 ] In preparation for the rule blob representation. Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Stable-dep-of: 91a139ce ("netfilter: nft_limit: do not ignore unsupported flags") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Pablo Neira Ayuso authored
[ Upstream commit 0617c3de ] Report -EINVAL in case userspace provides a unsupported set backend policy. Fixes: c50b960c ("netfilter: nf_tables: implement proper set selection") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Kunwu Chan authored
[ Upstream commit 776dac5a ] devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Fixes: 05bd97fc ("net: dsa: Add Vitesse VSC73xx DSA router driver") Signed-off-by:
Kunwu Chan <chentao@kylinos.cn> Suggested-by:
Jakub Kicinski <kuba@kernel.org> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240111072018.75971-1-chentao@kylinos.cn Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Hao Sun authored
[ Upstream commit 22c7fa17 ] For PTR_TO_FLOW_KEYS, check_flow_keys_access() only uses fixed off for validation. However, variable offset ptr alu is not prohibited for this ptr kind. So the variable offset is not checked. The following prog is accepted: func#0 @0 0: R1=ctx() R10=fp0 0: (bf) r6 = r1 ; R1=ctx() R6_w=ctx() 1: (79) r7 = *(u64 *)(r6 +144) ; R6_w=ctx() R7_w=flow_keys() 2: (b7) r8 = 1024 ; R8_w=1024 3: (37) r8 /= 1 ; R8_w=scalar() 4: (57) r8 &= 1024 ; R8_w=scalar(smin=smin32=0, smax=umax=smax32=umax32=1024,var_off=(0x0; 0x400)) 5: (0f) r7 += r8 mark_precise: frame0: last_idx 5 first_idx 0 subseq_idx -1 mark_precise: frame0: regs=r8 stack= before 4: (57) r8 &= 1024 mark_precise: frame0: regs=r8 stack= before 3: (37) r8 /= 1 mark_precise: frame0: regs=r8 stack= before 2: (b7) r8 = 1024 6: R7_w=flow_keys(smin=smin32=0,smax=umax=smax32=umax32=1024,var_off =(0x0; 0x400)) R8_w=scalar(smin=smin32=0,smax=umax=smax32=umax32=1024, var_off=(0x0; 0x400)) 6: (79) r0 = *(u64 *)(r7 +0) ; R0_w=scalar() 7: (95) exit This prog loads flow_keys to r7, and adds the variable offset r8 to r7, and finally causes out-of-bounds access: BUG: unable to handle page fault for address: ffffc90014c80038 [...] Call Trace: <TASK> bpf_dispatcher_nop_func include/linux/bpf.h:1231 [inline] __bpf_prog_run include/linux/filter.h:651 [inline] bpf_prog_run include/linux/filter.h:658 [inline] bpf_prog_run_pin_on_cpu include/linux/filter.h:675 [inline] bpf_flow_dissect+0x15f/0x350 net/core/flow_dissector.c:991 bpf_prog_test_run_flow_dissector+0x39d/0x620 net/bpf/test_run.c:1359 bpf_prog_test_run kernel/bpf/syscall.c:4107 [inline] __sys_bpf+0xf8f/0x4560 kernel/bpf/syscall.c:5475 __do_sys_bpf kernel/bpf/syscall.c:5561 [inline] __se_sys_bpf kernel/bpf/syscall.c:5559 [inline] __x64_sys_bpf+0x73/0xb0 kernel/bpf/syscall.c:5559 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x3f/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fix this by rejecting ptr alu with variable offset on flow_keys. Applying the patch rejects the program with "R7 pointer arithmetic on flow_keys prohibited". Fixes: d58e468b ("flow_dissector: implements flow dissector BPF hook") Signed-off-by:
Hao Sun <sunhao.th@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Yonghong Song <yonghong.song@linux.dev> Link: https://lore.kernel.org/bpf/20240115082028.9992-1-sunhao.th@gmail.com Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Qiang Ma authored
[ Upstream commit a23aa040 ] We found the following dmesg calltrace when testing the GMAC NIC notebook: [9.448656] ------------[ cut here ]------------ [9.448658] Unbalanced IRQ 43 wake disable [9.448673] WARNING: CPU: 3 PID: 1083 at kernel/irq/manage.c:688 irq_set_irq_wake+0xe0/0x128 [9.448717] CPU: 3 PID: 1083 Comm: ethtool Tainted: G O 4.19 #1 [9.448773] ... [9.448774] Call Trace: [9.448781] [<9000000000209b5c>] show_stack+0x34/0x140 [9.448788] [<9000000000d52700>] dump_stack+0x98/0xd0 [9.448794] [<9000000000228610>] __warn+0xa8/0x120 [9.448797] [<9000000000d2fb60>] report_bug+0x98/0x130 [9.448800] [<900000000020a418>] do_bp+0x248/0x2f0 [9.448805] [<90000000002035f4>] handle_bp_int+0x4c/0x78 [9.448808] [<900000000029ea40>] irq_set_irq_wake+0xe0/0x128 [9.448813] [<9000000000a96a7c>] stmmac_set_wol+0x134/0x150 [9.448819] [<9000000000be6ed0>] dev_ethtool+0x1368/0x2440 [9.448824] [<9000000000c08350>] dev_ioctl+0x1f8/0x3e0 [9.448827] [<9000000000bb2a34>] sock_ioctl+0x2a4/0x450 [9.448832] [<900000000046f044>] do_vfs_ioctl+0xa4/0x738 [9.448834] [<900000000046f778>] ksys_ioctl+0xa0/0xe8 [9.448837] [<900000000046f7d8>] sys_ioctl+0x18/0x28 [9.448840] [<9000000000211ab4>] syscall_common+0x20/0x34 [9.448842] ---[ end trace 40c18d9aec863c3e ]--- Multiple disable_irq_wake() calls will keep decreasing the IRQ wake_depth, When wake_depth is 0, calling disable_irq_wake() again, will report the above calltrace. Due to the need to appear in pairs, we cannot call disable_irq_wake() without calling enable_irq_wake(). Fix this by making sure there are no unbalanced disable_irq_wake() calls. Fixes: 3172d3af ("stmmac: support wake up irq from external sources (v3)") Signed-off-by:
Qiang Ma <maqianga@uniontech.com> Reviewed-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240112021249.24598-1-maqianga@uniontech.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Nikita Yushchenko authored
[ Upstream commit e327b237 ] In ravb_start_xmit(), ravb driver uses u32 variable to store result of dma_map_single() call. Since ravb hardware has 32-bit address fields in descriptors, this works properly when mapping is successful - it is platform's job to provide mapping addresses that fit into hardware limitations. However, in failure case dma_map_single() returns DMA_MAPPING_ERROR constant that is 64-bit when dma_addr_t is 64-bit. Storing this constant in u32 leads to truncation, and further call to dma_mapping_error() fails to notice the error. Fix that by storing result of dma_map_single() in a dma_addr_t variable. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Signed-off-by:
Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by:
Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 66ff70df ] syzbot reported that subflow_check_req() was using uninitialized data in subflow_check_req() [1] This is because mp_opt.token is only set when OPTION_MPTCP_MPJ_SYN is also set. While we are are it, fix mptcp_subflow_init_cookie_req() to test for OPTION_MPTCP_MPJ_ACK. [1] BUG: KMSAN: uninit-value in subflow_token_join_request net/mptcp/subflow.c:91 [inline] BUG: KMSAN: uninit-value in subflow_check_req+0x1028/0x15d0 net/mptcp/subflow.c:209 subflow_token_join_request net/mptcp/subflow.c:91 [inline] subflow_check_req+0x1028/0x15d0 net/mptcp/subflow.c:209 subflow_v6_route_req+0x269/0x410 net/mptcp/subflow.c:367 tcp_conn_request+0x153a/0x4240 net/ipv4/tcp_input.c:7164 subflow_v6_conn_request+0x3ee/0x510 tcp_rcv_state_process+0x2e1/0x4ac0 net/ipv4/tcp_input.c:6659 tcp_v6_do_rcv+0x11bf/0x1fe0 net/ipv6/tcp_ipv6.c:1669 tcp_v6_rcv+0x480b/0x4fb0 net/ipv6/tcp_ipv6.c:1900 ip6_protocol_deliver_rcu+0xda6/0x2a60 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 dst_input include/net/dst.h:461 [inline] ip6_rcv_finish+0x5db/0x870 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xda/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5532 [inline] __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5646 netif_receive_skb_internal net/core/dev.c:5732 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5791 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1555 tun_get_user+0x53af/0x66d0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2020 [inline] new_sync_write fs/read_write.c:491 [inline] vfs_write+0x8ef/0x1490 fs/read_write.c:584 ksys_write+0x20f/0x4c0 fs/read_write.c:637 __do_sys_write fs/read_write.c:649 [inline] __se_sys_write fs/read_write.c:646 [inline] __x64_sys_write+0x93/0xd0 fs/read_write.c:646 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Local variable mp_opt created at: subflow_check_req+0x6d/0x15d0 net/mptcp/subflow.c:145 subflow_v6_route_req+0x269/0x410 net/mptcp/subflow.c:367 CPU: 1 PID: 5924 Comm: syz-executor.3 Not tainted 6.7.0-rc8-syzkaller-00055-g5eff55d725a4 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Peter Krystad <peter.krystad@linux.intel.com> Cc: Matthieu Baerts <matttbe@kernel.org> Cc: Mat Martineau <martineau@kernel.org> Cc: Geliang Tang <geliang.tang@linux.dev> Reviewed-by:
Simon Horman <horms@kernel.org> Acked-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20240111194917.4044654-5-edumazet@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit be1d9d9d ] subflow_finish_connect() uses four fields (backup, join_id, thmac, none) that may contain garbage unless OPTION_MPTCP_MPJ_SYNACK has been set in mptcp_parse_option() Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Peter Krystad <peter.krystad@linux.intel.com> Cc: Matthieu Baerts <matttbe@kernel.org> Cc: Mat Martineau <martineau@kernel.org> Cc: Geliang Tang <geliang.tang@linux.dev> Reviewed-by:
Simon Horman <horms@kernel.org> Acked-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20240111194917.4044654-4-edumazet@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit c1665273 ] mp_opt->hmac contains uninitialized data unless OPTION_MPTCP_MPJ_ACK was set in mptcp_parse_option(). We must refine the condition before we call subflow_hmac_valid(). Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Peter Krystad <peter.krystad@linux.intel.com> Cc: Matthieu Baerts <matttbe@kernel.org> Cc: Mat Martineau <martineau@kernel.org> Cc: Geliang Tang <geliang.tang@linux.dev> Reviewed-by:
Simon Horman <horms@kernel.org> Acked-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20240111194917.4044654-3-edumazet@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Geliang Tang authored
[ Upstream commit 0799e21b ] The parameter 'sk' became useless since the code using it was dropped from mptcp_get_options() in the commit 8d548ea1 ("mptcp: do not set unconditionally csum_reqd on incoming opt"). Let's drop it. Signed-off-by:
Geliang Tang <geliang.tang@suse.com> Signed-off-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Stable-dep-of: c1665273 ("mptcp: strict validation before using mp_opt->hmac") Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Eric Dumazet authored
[ Upstream commit 89e23277 ] mptcp_parse_option() currently sets OPTIONS_MPTCP_MPJ, for the three possible cases handled for MPTCPOPT_MP_JOIN option. OPTIONS_MPTCP_MPJ is the combination of three flags: - OPTION_MPTCP_MPJ_SYN - OPTION_MPTCP_MPJ_SYNACK - OPTION_MPTCP_MPJ_ACK This is a problem, because backup, join_id, token, nonce and/or hmac fields could be left uninitialized in some cases. Distinguish the three cases, as following patches will need this step. Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Signed-off-by:
Eric Dumazet <edumazet@google.com> Cc: Florian Westphal <fw@strlen.de> Cc: Peter Krystad <peter.krystad@linux.intel.com> Cc: Matthieu Baerts <matttbe@kernel.org> Cc: Mat Martineau <martineau@kernel.org> Cc: Geliang Tang <geliang.tang@linux.dev> Reviewed-by:
Simon Horman <horms@kernel.org> Acked-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20240111194917.4044654-2-edumazet@google.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Claudiu Beznea authored
[ Upstream commit e398822c ] The RZ/G3S SMARC Module has 2 KSZ9131 PHYs. In this setup, the KSZ9131 PHY is used with the ravb Ethernet driver. It has been discovered that when bringing the Ethernet interface down/up continuously, e.g., with the following sh script: $ while :; do ifconfig eth0 down; ifconfig eth0 up; done the link speed and duplex are wrong after interrupting the bring down/up operation even though the Ethernet interface is up. To recover from this state the following configuration sequence is necessary (executed manually): $ ifconfig eth0 down $ ifconfig eth0 up The behavior has been identified also on the Microchip SAMA7G5-EK board which runs the macb driver and uses the same PHY. The order of PHY-related operations in ravb_open() is as follows: ravb_open() -> ravb_phy_start() -> ravb_phy_init() -> of_phy_connect() -> phy_connect_direct() -> phy_attach_direct() -> phy_init_hw() -> phydev->drv->soft_reset() phydev->drv->config_init() phydev->drv->config_intr() phy_resume() kszphy_resume() The order of PHY-related operations in ravb_close is as follows: ravb_close() -> phy_stop() -> phy_suspend() -> kszphy_suspend() -> genphy_suspend() // set BMCR_PDOWN bit in MII_BMCR In genphy_suspend() setting the BMCR_PDWN bit in MII_BMCR switches the PHY to Software Power-Down (SPD) mode (according to the KSZ9131 datasheet). Thus, when opening the interface after it has been previously closed (via ravb_close()), the phydev->drv->config_init() and phydev->drv->config_intr() reach the KSZ9131 PHY driver via the ksz9131_config_init() and kszphy_config_intr() functions. KSZ9131 specifies that the MII management interface remains operational during SPD (Software Power-Down), but (according to manual): - Only access to the standard registers (0 through 31) is supported. - Access to MMD address spaces other than MMD address space 1 is possible if the spd_clock_gate_override bit is set. - Access to MMD address space 1 is not possible. The spd_clock_gate_override bit is not used in the KSZ9131 driver. ksz9131_config_init() configures RGMII delay, pad skews and LEDs by accessesing MMD registers other than those in address space 1. The datasheet for the KSZ9131 does not specify what happens if registers from an unsupported address space are accessed while the PHY is in SPD. To fix the issue the .soft_reset method has been instantiated for KSZ9131, too. This resets the PHY to the default state before doing any configurations to it, thus switching it out of SPD. Fixes: bff5b4b3 ("net: phy: micrel: add Microchip KSZ9131 initial driver") Signed-off-by:
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Reviewed-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Sanjuán García, Jorge authored
[ Upstream commit 64e47d8a ] The value of AM65_CPSW_MAX_PACKET_SIZE represents the maximum length of a received frame. This value is written to the register AM65_CPSW_PORT_REG_RX_MAXLEN. The maximum MTU configured on the network device should then leave some room for the ethernet headers and frame check. Otherwise, if the network interface is configured to its maximum mtu possible, the frames will be larger than AM65_CPSW_MAX_PACKET_SIZE and will get dropped as oversized. The switch supports ethernet frame sizes between 64 and 2024 bytes (including VLAN) as stated in the technical reference manual, so define AM65_CPSW_MAX_PACKET_SIZE with that maximum size. Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by:
Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com> Reviewed-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Link: https://lore.kernel.org/r/20240105085530.14070-2-jorge.sanjuangarcia@duagon.com Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Lin Ma authored
[ Upstream commit b33fb5b8 ] The variable rmnet_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207 CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 nla_parse_nested_deprecated include/net/netlink.h:1248 [inline] __rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594 rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdcf2072359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359 RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003 RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000 </TASK> The buggy address belongs to the variable: rmnet_policy+0x30/0xe0 The buggy address belongs to the physical page: page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243 flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07 ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9 >ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 ^ ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9 ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 According to the comment of `nla_parse_nested_deprecated`, the maxtype should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here. Fixes: 14452ca3 ("net: qualcomm: rmnet: Export mux_id and flags to netlink") Signed-off-by:
Lin Ma <linma@zju.edu.cn> Reviewed-by:
Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Reviewed-by:
Simon Horman <horms@kernel.org> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/20240110061400.3356108-1-linma@zju.edu.cn Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Niklas Schnelle authored
[ Upstream commit 80df7d6a ] The zpci_get_max_write_size() helper is used to determine the maximum size a PCI store or load can use at a given __iomem address. For the PCI block store the following restrictions apply: 1. The dst + len must not cross a 4K boundary in the (pseudo-)MMIO space 2. len must not exceed ZPCI_MAX_WRITE_SIZE 3. len must be a multiple of 8 bytes 4. The src address must be double word (8 byte) aligned 5. The dst address must be double word (8 byte) aligned Otherwise only a normal PCI store which takes its src value from a register can be used. For these PCI store restriction 1 still applies. Similarly 1 also applies to PCI loads. It turns out zpci_max_write_size() instead implements stricter conditions which prevents PCI block stores from being used where they can and should be used. In particular instead of conditions 4 and 5 it wrongly enforces both dst and src to be size aligned. This indirectly covers condition 1 but also prevents many legal PCI block stores. On top of the functional shortcomings the zpci_get_max_write_size() is misnamed as it is used for both read and write size calculations. Rename it to zpci_get_max_io_size() and implement the listed conditions explicitly. Reviewed-by:
Matthew Rosato <mjrosato@linux.ibm.com> Fixes: cd248341 ("s390/pci: base support") Signed-off-by:
Niklas Schnelle <schnelle@linux.ibm.com> [agordeev@linux.ibm.com replaced spaces with tabs] Signed-off-by:
Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-
Siddharth Vadapalli authored
[ Upstream commit c12ca110 ] The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy() function. The PHY in this case is the Serdes. It is possible that the PCI instance is configured for two lane operation across two different Serdes instances, using one lane of each Serdes. In such a configuration, if the reference clock for one Serdes is provided by the other Serdes, it results in a race condition. After the Serdes providing the reference clock is initialized by the PCI driver by invoking its PHY APIs, it is not guaranteed that this Serdes remains powered on long enough for the PHY APIs based initialization of the dependent Serdes. In such cases, the PLL of the dependent Serdes fails to lock due to the absence of the reference clock from the former Serdes which has been powered off by the PM Core. Fix this by obtaining reference to the PHYs before invoking the PHY initialization APIs and releasing reference after the initialization is complete. Link: https://lore.kernel.org/linux-pci/20230927041845.1222080-1-s-vadapalli@ti.com Fixes: 49229238 ("PCI: keystone: Cleanup PHY handling") Signed-off-by:
Siddharth Vadapalli <s-vadapalli@ti.com> Signed-off-by:
Krzysztof Wilczyński <kwilczynski@kernel.org> Acked-by:
Ravi Gunasekaran <r-gunasekaran@ti.com> Signed-off-by:
Sasha Levin <sashal@kernel.org>
-