- Jan 09, 2014
-
-
John W. Linville authored
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
-
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/nfc-fixesJohn W. Linville authored
Samuel Ortiz <sameo@linux.intel.com> says: "This is the first NFC fixes pull request for 3.13. It only contains one fix for a regression introduced with commit e29a9e2a . Without this fix, we can not establish a p2p link in target mode. Only initiator mode works." Signed-off-by:
John W. Linville <linville@tuxdriver.com>
-
- Jan 08, 2014
-
-
Erik Hugne authored
When we pull a received packet from a link's 'deferred packets' queue for processing, its 'next' pointer is not cleared, and still refers to the next packet in that queue, if any. This is incorrect, but caused no harm before commit 40ba3cdf ("tipc: message reassembly using fragment chain") was introduced. After that commit, it may sometimes lead to the following oops: general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC Modules linked in: tipc CPU: 4 PID: 0 Comm: swapper/4 Tainted: G W 3.13.0-rc2+ #6 Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 task: ffff880017af4880 ti: ffff880017aee000 task.ti: ffff880017aee000 RIP: 0010:[<ffffffff81710694>] [<ffffffff81710694>] skb_try_coalesce+0x44/0x3d0 RSP: 0018:ffff880016603a78 EFLAGS: 00010212 RAX: 6b6b6b6bd6d6d6d6 RBX: ffff880013106ac0 RCX: ffff880016603ad0 RDX: ffff880016603ad7 RSI: ffff88001223ed00 RDI: ffff880013106ac0 RBP: ffff880016603ab8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffff88001223ed00 R13: ffff880016603ad0 R14: 000000000000058c R15: ffff880012297650 FS: 0000000000000000(0000) GS:ffff880016600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 000000000805b000 CR3: 0000000011f5d000 CR4: 00000000000006e0 Stack: ffff880016603a88 ffffffff810a38ed ffff880016603aa8 ffff88001223ed00 0000000000000001 ffff880012297648 ffff880016603b68 ffff880012297650 ffff880016603b08 ffffffffa0006c51 ffff880016603b08 00ffffffa00005fc Call Trace: <IRQ> [<ffffffff810a38ed>] ? trace_hardirqs_on+0xd/0x10 [<ffffffffa0006c51>] tipc_link_recv_fragment+0xd1/0x1b0 [tipc] [<ffffffffa0007214>] tipc_recv_msg+0x4e4/0x920 [tipc] [<ffffffffa00016f0>] ? tipc_l2_rcv_msg+0x40/0x250 [tipc] [<ffffffffa000177c>] tipc_l2_rcv_msg+0xcc/0x250 [tipc] [<ffffffffa00016f0>] ? tipc_l2_rcv_msg+0x40/0x250 [tipc] [<ffffffff8171e65b>] __netif_receive_skb_core+0x80b/0xd00 [<ffffffff8171df94>] ? __netif_receive_skb_core+0x144/0xd00 [<ffffffff8171eb76>] __netif_receive_skb+0x26/0x70 [<ffffffff8171ed6d>] netif_receive_skb+0x2d/0x200 [<ffffffff8171fe70>] napi_gro_receive+0xb0/0x130 [<ffffffff815647c2>] e1000_clean_rx_irq+0x2c2/0x530 [<ffffffff81565986>] e1000_clean+0x266/0x9c0 [<ffffffff81985f7b>] ? notifier_call_chain+0x2b/0x160 [<ffffffff8171f971>] net_rx_action+0x141/0x310 [<ffffffff81051c1b>] __do_softirq+0xeb/0x480 [<ffffffff819817bb>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff810b8c42>] ? handle_fasteoi_irq+0x72/0x100 [<ffffffff81052346>] irq_exit+0x96/0xc0 [<ffffffff8198cbc3>] do_IRQ+0x63/0xe0 [<ffffffff81981def>] common_interrupt+0x6f/0x6f <EOI> This happens when the last fragment of a message has passed through the the receiving link's 'deferred packets' queue, and at least one other packet was added to that queue while it was there. After the fragment chain with the complete message has been successfully delivered to the receiving socket, it is released. Since 'next' pointer of the last fragment in the released chain now is non-NULL, we get the crash shown above. We fix this by clearing the 'next' pointer of all received packets, including those being pulled from the 'deferred' queue, before they undergo any further processing. Fixes: 40ba3cdf ("tipc: message reassembly using fragment chain") Signed-off-by:
Erik Hugne <erik.hugne@ericsson.com> Reported-by:
Ying Xue <ying.xue@windriver.com> Reviewed-by:
Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Li RongQing authored
initialise pcpu_tstats.syncp to kill the calltrace [ 11.973950] Call Trace: [ 11.973950] [<819bbaff>] dump_stack+0x48/0x60 [ 11.973950] [<819bbaff>] dump_stack+0x48/0x60 [ 11.973950] [<81078dcf>] __lock_acquire.isra.22+0x1bf/0xc10 [ 11.973950] [<81078dcf>] __lock_acquire.isra.22+0x1bf/0xc10 [ 11.973950] [<81079fa7>] lock_acquire+0x77/0xa0 [ 11.973950] [<81079fa7>] lock_acquire+0x77/0xa0 [ 11.973950] [<817ca7ab>] ? dev_get_stats+0xcb/0x130 [ 11.973950] [<817ca7ab>] ? dev_get_stats+0xcb/0x130 [ 11.973950] [<8183862d>] ip_tunnel_get_stats64+0x6d/0x230 [ 11.973950] [<8183862d>] ip_tunnel_get_stats64+0x6d/0x230 [ 11.973950] [<817ca7ab>] ? dev_get_stats+0xcb/0x130 [ 11.973950] [<817ca7ab>] ? dev_get_stats+0xcb/0x130 [ 11.973950] [<811cf8c1>] ? __nla_reserve+0x21/0xd0 [ 11.973950] [<811cf8c1>] ? __nla_reserve+0x21/0xd0 [ 11.973950] [<817ca7ab>] dev_get_stats+0xcb/0x130 [ 11.973950] [<817ca7ab>] dev_get_stats+0xcb/0x130 [ 11.973950] [<817d5409>] rtnl_fill_ifinfo+0x569/0xe20 [ 11.973950] [<817d5409>] rtnl_fill_ifinfo+0x569/0xe20 [ 11.973950] [<810352e0>] ? kvm_clock_read+0x20/0x30 [ 11.973950] [<810352e0>] ? kvm_clock_read+0x20/0x30 [ 11.973950] [<81008e38>] ? sched_clock+0x8/0x10 [ 11.973950] [<81008e38>] ? sched_clock+0x8/0x10 [ 11.973950] [<8106ba45>] ? sched_clock_local+0x25/0x170 [ 11.973950] [<8106ba45>] ? sched_clock_local+0x25/0x170 [ 11.973950] [<810da6bd>] ? __kmalloc+0x3d/0x90 [ 11.973950] [<810da6bd>] ? __kmalloc+0x3d/0x90 [ 11.973950] [<817b8c10>] ? __kmalloc_reserve.isra.41+0x20/0x70 [ 11.973950] [<817b8c10>] ? __kmalloc_reserve.isra.41+0x20/0x70 [ 11.973950] [<810da81a>] ? slob_alloc_node+0x2a/0x60 [ 11.973950] [<810da81a>] ? slob_alloc_node+0x2a/0x60 [ 11.973950] [<817b919a>] ? __alloc_skb+0x6a/0x2b0 [ 11.973950] [<817b919a>] ? __alloc_skb+0x6a/0x2b0 [ 11.973950] [<817d8795>] rtmsg_ifinfo+0x65/0xe0 [ 11.973950] [<817d8795>] rtmsg_ifinfo+0x65/0xe0 [ 11.973950] [<817cbd31>] register_netdevice+0x531/0x5a0 [ 11.973950] [<817cbd31>] register_netdevice+0x531/0x5a0 [ 11.973950] [<81892b87>] ? ip6_tnl_get_cap+0x27/0x90 [ 11.973950] [<81892b87>] ? ip6_tnl_get_cap+0x27/0x90 [ 11.973950] [<817cbdb6>] register_netdev+0x16/0x30 [ 11.973950] [<817cbdb6>] register_netdev+0x16/0x30 [ 11.973950] [<81f574a6>] vti6_init_net+0x1c4/0x1d4 [ 11.973950] [<81f574a6>] vti6_init_net+0x1c4/0x1d4 [ 11.973950] [<81f573af>] ? vti6_init_net+0xcd/0x1d4 [ 11.973950] [<81f573af>] ? vti6_init_net+0xcd/0x1d4 [ 11.973950] [<817c16df>] ops_init.constprop.11+0x17f/0x1c0 [ 11.973950] [<817c16df>] ops_init.constprop.11+0x17f/0x1c0 [ 11.973950] [<817c1779>] register_pernet_operations.isra.9+0x59/0x90 [ 11.973950] [<817c1779>] register_pernet_operations.isra.9+0x59/0x90 [ 11.973950] [<817c18d1>] register_pernet_device+0x21/0x60 [ 11.973950] [<817c18d1>] register_pernet_device+0x21/0x60 [ 11.973950] [<81f574b6>] ? vti6_init_net+0x1d4/0x1d4 [ 11.973950] [<81f574b6>] ? vti6_init_net+0x1d4/0x1d4 [ 11.973950] [<81f574c7>] vti6_tunnel_init+0x11/0x68 [ 11.973950] [<81f574c7>] vti6_tunnel_init+0x11/0x68 [ 11.973950] [<81f572a1>] ? mip6_init+0x73/0xb4 [ 11.973950] [<81f572a1>] ? mip6_init+0x73/0xb4 [ 11.973950] [<81f0cba4>] do_one_initcall+0xbb/0x15b [ 11.973950] [<81f0cba4>] do_one_initcall+0xbb/0x15b [ 11.973950] [<811a00d8>] ? sha_transform+0x528/0x1150 [ 11.973950] [<811a00d8>] ? sha_transform+0x528/0x1150 [ 11.973950] [<81f0c544>] ? repair_env_string+0x12/0x51 [ 11.973950] [<81f0c544>] ? repair_env_string+0x12/0x51 [ 11.973950] [<8105c30d>] ? parse_args+0x2ad/0x440 [ 11.973950] [<8105c30d>] ? parse_args+0x2ad/0x440 [ 11.973950] [<810546be>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 11.973950] [<810546be>] ? __usermodehelper_set_disable_depth+0x3e/0x50 [ 11.973950] [<81f0cd27>] kernel_init_freeable+0xe3/0x182 [ 11.973950] [<81f0cd27>] kernel_init_freeable+0xe3/0x182 [ 11.973950] [<81f0c532>] ? do_early_param+0x7a/0x7a [ 11.973950] [<81f0c532>] ? do_early_param+0x7a/0x7a [ 11.973950] [<819b5b1b>] kernel_init+0xb/0x100 [ 11.973950] [<819b5b1b>] kernel_init+0xb/0x100 [ 11.973950] [<819cebf7>] ret_from_kernel_thread+0x1b/0x28 [ 11.973950] [<819cebf7>] ret_from_kernel_thread+0x1b/0x28 [ 11.973950] [<819b5b10>] ? rest_init+0xc0/0xc0 [ 11.973950] [<819b5b10>] ? rest_init+0xc0/0xc0 Before 469bdcef ("ipv6: fix the use of pcpu_tstats in ip6_vti.c"), the pcpu_tstats.syncp is not used to pretect the 64bit elements of pcpu_tstats, so not appear this calltrace. Reported-by:
Fengguang Wu <fengguang.wu@intel.com> Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jan 07, 2014
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 bugfix from Ted Ts'o: "Fix a regression introduced in v3.13-rc6" * tag 'ext4_for_linus_stable' of http://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: fix bigalloc regression
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "I'm hoping this is the very last batch of networking fixes for 3.13, here goes nothing: 1) Fix crashes in VLAN's header_ops passthru. 2) Bridge multicast code needs to use BH spinlocks to prevent deadlocks with timers. From Curt Brune. 3) ipv6 tunnels lack proper synchornization when updating percpu statistics. From Li RongQing. 4) Fixes to bnx2x driver from Yaniv Rosner, Dmitry Kravkov and Michal Kalderon. 5) Avoid undefined operator evaluation order in llc code, from Daniel Borkmann. 6) Error paths in various GSO offload paths do not unwind properly, in particular they must undo any modifications they have made to the SKB. From Wei-Chun Chao. 7) Fix RX refill races during restore in virtio-net, from Jason Wang. 8) Fix SKB use after free in LLC code, from Daniel Borkmann. 9) Missing unlock and OOPS in netpoll code when VLAN tag handling fails. 10) Fix vxlan device attachment wrt ipv6, from Fan Du. 11) Don't allow creating infiniband links to non-infiniband devices, from Hangbin Liu. 12) Revert FEC phy reset active low change, it breaks things. From Fabio Estevam. 13) Fix header pointer handling in 6lowpan header building code, from Daniel Borkmann. 14) Fix RSS handling in be2net driver, from Vasundhara Volam. 15) Fix modem port indexing in HSO driver, from Dan Williams" * http://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (38 commits) bridge: use spin_lock_bh() in br_multicast_set_hash_max ipv6: don't install anycast address for /128 addresses on routers hso: fix handling of modem port SERIAL_STATE notifications isdn: Drop big endian cpp checks from telespci and hfc_pci drivers be2net: fix max_evt_qs calculation for BE3 in SR-IOV config be2net: increase the timeout value for loopback-test FW cmd be2net: disable RSS when number of RXQs is reduced to 1 via set-channels xen-netback: Include header for vmalloc net: 6lowpan: fix lowpan_header_create non-compression memcpy call fec: Revert "fec: Do not assume that PHY reset is active low" bnx2x: fix VLAN configuration for VFs. bnx2x: fix AFEX memory overflow bnx2x: Clean before update RSS arrives bnx2x: Correct number of MSI-X vectors for VFs bnx2x: limit number of interrupt vectors for 57711 qlcnic: Fix bug in Tx completion path infiniband: make sure the src net is infiniband when create new link {vxlan, inet6} Mark vxlan_dev flags with VXLAN_F_IPV6 properly cxgb4: allow large buffer size to have page size netpoll: Fix missing TXQ unlock and and OOPS. ...
-
Curt Brune authored
br_multicast_set_hash_max() is called from process context in net/bridge/br_sysfs_br.c by the sysfs store_hash_max() function. br_multicast_set_hash_max() calls spin_lock(&br->multicast_lock), which can deadlock the CPU if a softirq that also tries to take the same lock interrupts br_multicast_set_hash_max() while the lock is held . This can happen quite easily when any of the bridge multicast timers expire, which try to take the same lock. The fix here is to use spin_lock_bh(), preventing other softirqs from executing on this CPU. Steps to reproduce: 1. Create a bridge with several interfaces (I used 4). 2. Set the "multicast query interval" to a low number, like 2. 3. Enable the bridge as a multicast querier. 4. Repeatedly set the bridge hash_max parameter via sysfs. # brctl addbr br0 # brctl addif br0 eth1 eth2 eth3 eth4 # brctl setmcqi br0 2 # brctl setmcquerier br0 1 # while true ; do echo 4096 > /sys/class/net/br0/bridge/hash_max; done Signed-off-by:
Curt Brune <curt@cumulusnetworks.com> Signed-off-by:
Scott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hannes Frederic Sowa authored
It does not make sense to create an anycast address for an /128-prefix. Suppress it. As 32019e65 ("ipv6: Do not leave router anycast address for /127 prefixes.") shows we also may not leave them, because we could accidentally remove an anycast address the user has allocated or got added via another prefix. Cc: François-Xavier Le Bail <fx.lebail@yahoo.com> Cc: Thomas Haller <thaller@redhat.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dan Williams authored
The existing serial state notification handling expected older Option devices, having a hardcoded assumption that the Modem port was always USB interface #2. That isn't true for devices from the past few years. hso_serial_state_notification is a local cache of a USB Communications Interface Class SERIAL_STATE notification from the device, and the USB CDC specification (section 6.3, table 67 "Class-Specific Notifications") defines wIndex as the USB interface the event applies to. For hso devices this will always be the Modem port, as the Modem port is the only port which is set up to receive them by the driver. So instead of always expecting USB interface #2, instead validate the notification with the actual USB interface number of the Modem port. Signed-off-by:
Dan Williams <dcbw@redhat.com> Tested-by:
H. Nikolaus Schaller <hns@goldelico.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Guenter Roeck authored
With arm:allmodconfig, building the Teles PCI driver fails with telespci.c:294:2: error: #error "not running on big endian machines now" Similar, building the driver for HFC PCI-Bus cards fails with hfc_pci.c:1647:2: error: #error "not running on big endian machines now" Remove the big endian cpp check from both drivers to fix the build errors. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
-
Eric Whitney authored
Commit f5a44db5 introduced a regression on filesystems created with the bigalloc feature (cluster size > blocksize). It causes xfstests generic/006 and /013 to fail with an unexpected JBD2 failure and transaction abort that leaves the test file system in a read only state. Other xfstests run on bigalloc file systems are likely to fail as well. The cause is the accidental use of a cluster mask where a cluster offset was needed in ext4_ext_map_blocks(). Signed-off-by:
Eric Whitney <enwlinux@gmail.com>
-
David S. Miller authored
Sathya Perla says: ==================== be2net: patch set Pls apply the following bug fixes to the 'net' tree. Thanks. Suresh Reddy (2): be2net: increase the timeout value for loopback-test FW cmd be2net: fix max_evt_qs calculation for BE3 in SR-IOV config Vasundhara Volam (1): be2net: disable RSS when number of RXQs is reduced to 1 via set-channels ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Suresh Reddy authored
The driver wrongly assumes 16 EQs/vectors are available for each BE3 PF. When SR-IOV is enabled, a BE3 PF can support only a max of 8 EQs. Signed-off-by:
Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Suresh Reddy authored
The loopback test FW cmd may need upto 15 seconds to complete on certain PHYs. This patch also fixes the name of the completion variable used to synchronize FW cmd completions as it not used by the flashing cmd alone anymore. Signed-off-by:
Suresh Reddy <suresh.reddy@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vasundhara Volam authored
When *only* the default RXQ is used, the RSS policy must be disabled so that all IP and no-IP traffic is placed into the default RXQ. If not, IP traffic is dropped. Also, issue the RSS_CONFIG cmd only if FW advertises RSS capability for the interface. Signed-off-by:
Vasundhara Volam <vasundhara.volam@emulex.com> Signed-off-by:
Sathya Perla <sathya.perla@emulex.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Jan 06, 2014
-
-
Josh Boyer authored
Commit ac3d5ac2 ("xen-netback: fix guest-receive-side array sizes") added calls to vmalloc and vfree in the interface.c file without including <linux/vmalloc.h>. This causes build failures if the -Werror=implicit-function-declaration flag is passed. Signed-off-by:
Josh Boyer <jwboyer@fedoraproject.org> Acked-by:
Wei Liu <wei.liu2@citrix.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Daniel Borkmann authored
In function lowpan_header_create(), we invoke the following code construct: struct ipv6hdr *hdr; ... hdr = ipv6_hdr(skb); ... if (...) memcpy(hc06_ptr + 1, &hdr->flow_lbl[1], 2); else memcpy(hc06_ptr, &hdr, 4); Where the else path of the condition, that is, non-compression path, calls memcpy() with a pointer to struct ipv6hdr *hdr as source, thus two levels of indirection. This cannot be correct, and likely only one level of pointer was intended as source buffer for memcpy() here. Fixes: 44331fe2 ("IEEE802.15.4: 6LoWPAN basic support") Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Cc: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Cc: Werner Almesberger <werner@almesberger.net> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Fabio Estevam authored
In order to keep DT compatibility we need to revert this, otherwise the original dts files will no longer work with this driver change. This reverts commit 7a399e3a . Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Yuval Mintz says: ==================== bnx2x: Bug fixes patch series Most of what this parch series contains is SR-IOV related bug fixes. Additionally, it contains some small fixes for legacy devices/modes. Please consider applying these patches to `net'. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
If the hypervisor configures a vlan for the VF via the PF, the expected result is that only packets tagged by said vlan will be received by the VF (and that vlan will be silently removed). Due to an incorrect manipulation of vlan filters in the driver, the VF can receive untagged traffic even if the hypervisor configured some vlan for it. This patch corrects the behaviour. Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yuval Mintz authored
There are 2 different (related) flows in the slowpath configuration that utilize the same pointer and cast it to different structs; This is obviously incorrect as the intended allocated memory is that of the smaller struct, possibly causing the flow utilizing the larger struct to corrupt other slowpath configuration. Since both flows are exclusive, set the allocated memory to be a union of both structs. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Kalderon authored
When a PF receives a VF message indicating a change in RSS properties it should clean the flags' bit-fields; Otherwise, it's possible that some random values will be considered as flags by the lower layers configuring the RSS in FW. Signed-off-by:
Michal Kalderon <michals@broadcom.com> Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Michal Kalderon authored
Number of VFs in PCIe configuration space is zero-based. Driver incorrectly sets the number of VFs to be larger by one than what actually is feasible by HW, which might cause later VFs to fail to allocate their MSI-X interrupts. Signed-off-by:
Michal Kalderon <michals@broadcom.com> Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Dmitry Kravkov authored
Original straightforward division may lead to zeroing number of SB and null-pointer dereference when device is short of MSIX vectors or lacks MSIX capabilities. Reported-by:
Vladislav Zolotarov <vladz@cloudius-systems.com> Signed-off-by:
Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by:
Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by:
Ariel Elior <ariele@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds authored
Pull ARM fixes from Russell King: "Another set of small fixes for ARM, covering various areas. Laura fixed a long standing issue with virt_addr_valid() failing to handle holes in memory. Steve found a problem with dcache flushing for compound pages. I fixed another bug in footbridge stuff causing time to tick slowly, and also a problem with the AES code which can cause linker errors. A patch from Rob which fixes Xen problems induced by a lack of consistency in our naming of ioremap_cache() - which thankfully has very few users" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 7933/1: rename ioremap_cached to ioremap_cache ARM: fix "bad mode in ... handler" message for undefined instructions CRYPTO: Fix more AES build errors ARM: 7931/1: Correct virt_addr_valid ARM: 7923/1: mm: fix dcache flush logic for compound high pages ARM: fix footbridge clockevent device
-
- Jan 05, 2014
-
-
Rob Herring authored
ioremap_cache is more aligned with other architectures. There are only 2 users of this in the kernel: pxa2xx-flash and Xen. This fixes Xen build failures on arm64: drivers/tty/hvc/hvc_xen.c:233:2: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration] drivers/xen/grant-table.c:1174:3: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration] drivers/xen/xenbus/xenbus_probe.c:778:4: error: implicit declaration of function 'ioremap_cached' [-Werror=implicit-function-declaration] Signed-off-by:
Rob Herring <rob.herring@calxeda.com> Signed-off-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
The array was missing the final entry for the undefined instruction exception handler; this commit adds it. Cc: <stable@vger.kernel.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Building a multi-arch kernel results in: arch/arm/crypto/built-in.o: In function `aesbs_xts_decrypt': sha1_glue.c:(.text+0x15c8): undefined reference to `bsaes_xts_decrypt' arch/arm/crypto/built-in.o: In function `aesbs_xts_encrypt': sha1_glue.c:(.text+0x1664): undefined reference to `bsaes_xts_encrypt' arch/arm/crypto/built-in.o: In function `aesbs_ctr_encrypt': sha1_glue.c:(.text+0x184c): undefined reference to `bsaes_ctr32_encrypt_blocks' arch/arm/crypto/built-in.o: In function `aesbs_cbc_decrypt': sha1_glue.c:(.text+0x19b4): undefined reference to `bsaes_cbc_encrypt' This code is already runtime-conditional on NEON being supported, so there's no point compiling it out depending on the minimum build architecture. Acked-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds authored
Pull sparc bugfixes from David Miller: 1) Missing include can lead to build failure, from Kirill Tkhai. 2) Use dev_is_pci() where applicable, from Yijing Wang. 3) Enable irqs after we enable preemption in cpu startup path, from Kirill Tkhai. 4) Revert a __copy_{to,from}_user_inatomic change that broke iov_iter_copy_from_user_atomic() and thus several tests in xfstests and LTP. From Dave Kleikamp. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: Revert "sparc64: Fix __copy_{to,from}_user_inatomic defines." sparc64: smp_callin: Enable irqs after preemption is disabled sparc/PCI: Use dev_is_pci() to identify PCI devices sparc64: Fix build regression
-
Dave Kleikamp authored
This reverts commit 145e1c00 . This commit broke the behavior of __copy_from_user_inatomic when it is only partially successful. Instead of returning the number of bytes not copied, it now returns 1. This translates to the wrong value being returned by iov_iter_copy_from_user_atomic. xfstests generic/246 and LTP writev01 both fail on btrfs and nfs because of this. Signed-off-by:
Dave Kleikamp <dave.kleikamp@oracle.com> Cc: Hugh Dickins <hughd@google.com> Cc: David S. Miller <davem@davemloft.net> Cc: sparclinux@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Kirill Tkhai authored
Most of other architectures have below suggested order. So lets do the same to fit generic idle loop scheme better. Signed-off-by:
Kirill Tkhai <tkhai@yandex.ru> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yijing Wang authored
Use dev_is_pci() instead of checking bus type directly. Signed-off-by:
Yijing Wang <wangyijing@huawei.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
-
- Jan 04, 2014
-
-
Arron Wang authored
With commit e29a9e2a , we set the active_target pointer from nfc_dep_link_is_up() in order to support the case where the target detection and the DEP link setting are done atomically by the driver. That can only happen in initiator mode, so we need to check for that otherwise we fail to bring a p2p link in target mode. Signed-off-by:
Arron Wang <arron.wang@intel.com> Signed-off-by:
Samuel Ortiz <sameo@linux.intel.com>
-
Shahed Shaikh authored
o Driver is using common tx_clean_lock for all Tx queues. This patch adds per queue tx_clean_lock. o Driver is not updating sw_consumer while processing Tx completion when interface is going down. Fixed in this patch. Signed-off-by:
Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Hangbin Liu authored
When we create a new infiniband link with uninfiniband device, e.g. `ip link add link em1 type ipoib pkey 0x8001`. We will get a NULL pointer dereference cause other dev like Ethernet don't have struct ib_device. The code path is: rtnl_newlink |-- ipoib_new_child_link |-- __ipoib_vlan_add |-- ipoib_set_dev_features |-- ib_query_device Fix this bug by make sure the src net is infiniband when create new link. Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
fan.du authored
Even if user doesn't supply the physical netdev to attach vxlan dev to, and at the same time user want to vxlan sit top of IPv6, mark vxlan_dev flags with VXLAN_F_IPV6 to create IPv6 based socket. Otherwise kernel crashes safely every time spitting below messages, Steps to reproduce: ip link add vxlan0 type vxlan id 42 group ff0e::110 ip link set vxlan0 up [ 62.656266] BUG: unable to handle kernel NULL pointer dereference[ 62.656320] ip (3008) used greatest stack depth: 3912 bytes left at 0000000000000046 [ 62.656423] IP: [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.656525] PGD 2c966067 PUD 2c9a2067 PMD 0 [ 62.656674] Oops: 0000 [#1] SMP [ 62.656781] Modules linked in: vxlan netconsole deflate zlib_deflate af_key [ 62.657083] CPU: 1 PID: 2128 Comm: whoopsie Not tainted 3.12.0+ #182 [ 62.657083] Hardware name: innotek GmbH VirtualBox, BIOS VirtualBox 12/01/2006 [ 62.657083] task: ffff88002e2335d0 ti: ffff88002c94c000 task.ti: ffff88002c94c000 [ 62.657083] RIP: 0010:[<ffffffff816d822d>] [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.657083] RSP: 0000:ffff88002fd038f8 EFLAGS: 00210296 [ 62.657083] RAX: 0000000000000000 RBX: ffff88002fd039e0 RCX: 0000000000000000 [ 62.657083] RDX: ffff88002fd0eb68 RSI: ffff88002fd0d278 RDI: ffff88002fd0d278 [ 62.657083] RBP: ffff88002fd03918 R08: 0000000002000000 R09: 0000000000000000 [ 62.657083] R10: 00000000000001ff R11: 0000000000000000 R12: 0000000000000001 [ 62.657083] R13: ffff88002d96b480 R14: ffffffff81c8e2c0 R15: 0000000000000001 [ 62.657083] FS: 0000000000000000(0000) GS:ffff88002fd00000(0063) knlGS:00000000f693b740 [ 62.657083] CS: 0010 DS: 002b ES: 002b CR0: 0000000080050033 [ 62.657083] CR2: 0000000000000046 CR3: 000000002c9d2000 CR4: 00000000000006e0 [ 62.657083] Stack: [ 62.657083] ffff88002fd03a40 ffffffff81c8e2c0 ffff88002fd039e0 ffff88002d96b480 [ 62.657083] ffff88002fd03958 ffffffff816cac8b ffff880019277cc0 ffff8800192b5d00 [ 62.657083] ffff88002d5bc000 ffff880019277cc0 0000000000001821 0000000000000001 [ 62.657083] Call Trace: [ 62.657083] <IRQ> [ 62.657083] [<ffffffff816cac8b>] ip6_dst_lookup_tail+0xdb/0xf0 [ 62.657083] [<ffffffff816caea0>] ip6_dst_lookup+0x10/0x20 [ 62.657083] [<ffffffffa0020c13>] vxlan_xmit_one+0x193/0x9c0 [vxlan] [ 62.657083] [<ffffffff8137b3b7>] ? account+0xc7/0x1f0 [ 62.657083] [<ffffffffa0021513>] vxlan_xmit+0xd3/0x400 [vxlan] [ 62.657083] [<ffffffff8161390d>] dev_hard_start_xmit+0x49d/0x5e0 [ 62.657083] [<ffffffff81613d29>] dev_queue_xmit+0x2d9/0x480 [ 62.657083] [<ffffffff817cb854>] ? _raw_write_unlock_bh+0x14/0x20 [ 62.657083] [<ffffffff81630565>] ? eth_header+0x35/0xe0 [ 62.657083] [<ffffffff8161bc5e>] neigh_resolve_output+0x11e/0x1e0 [ 62.657083] [<ffffffff816ce0e0>] ? ip6_fragment+0xad0/0xad0 [ 62.657083] [<ffffffff816cb465>] ip6_finish_output2+0x2f5/0x470 [ 62.657083] [<ffffffff816ce166>] ip6_finish_output+0x86/0xc0 [ 62.657083] [<ffffffff816ce218>] ip6_output+0x78/0xb0 [ 62.657083] [<ffffffff816eadd6>] mld_sendpack+0x256/0x2a0 [ 62.657083] [<ffffffff816ebd8c>] mld_ifc_timer_expire+0x17c/0x290 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff81051065>] call_timer_fn+0x45/0x150 [ 62.657083] [<ffffffff816ebc10>] ? igmp6_timer_handler+0x80/0x80 [ 62.657083] [<ffffffff81052353>] run_timer_softirq+0x1f3/0x2a0 [ 62.657083] [<ffffffff8102dfd8>] ? lapic_next_event+0x18/0x20 [ 62.657083] [<ffffffff8109e36f>] ? clockevents_program_event+0x6f/0x110 [ 62.657083] [<ffffffff8104a2f6>] __do_softirq+0xd6/0x2b0 [ 62.657083] [<ffffffff8104a75e>] irq_exit+0x7e/0xa0 [ 62.657083] [<ffffffff8102ea15>] smp_apic_timer_interrupt+0x45/0x60 [ 62.657083] [<ffffffff817d3eca>] apic_timer_interrupt+0x6a/0x70 [ 62.657083] <EOI> [ 62.657083] [<ffffffff817d4a35>] ? sysenter_dispatch+0x7/0x1a [ 62.657083] Code: 4d 8b 85 a8 02 00 00 4c 89 e9 ba 03 04 00 00 48 c7 c6 c0 be 8d 81 48 c7 c7 48 35 a3 81 31 c0 e8 db 68 0e 00 49 8b 85 a8 02 00 00 <0f> b6 40 46 c0 e8 05 0f b6 c0 c1 e0 03 41 09 c4 e9 77 ff ff ff [ 62.657083] RIP [<ffffffff816d822d>] ip6_route_output+0xbd/0xe0 [ 62.657083] RSP <ffff88002fd038f8> [ 62.657083] CR2: 0000000000000046 [ 62.657083] ---[ end trace ba8a9583d7cd1934 ]--- [ 62.657083] Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by:
Fan Du <fan.du@windriver.com> Reported-by:
Ryan Whelan <rcwhelan@gmail.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thadeu Lima de Souza Cascardo authored
Since commit 52367a76 ("cxgb4/cxgb4vf: Code cleanup to enable T4 Configuration File support"), we have failures like this during cxgb4 probe: cxgb4 0000:01:00.4: bad SGE FL page buffer sizes [65536, 65536] cxgb4: probe of 0000:01:00.4 failed with error -22 This happens whenever software parameters are used, without a configuration file. That happens when the hardware was already initialized (after kexec, or after csiostor is loaded). It happens that these values are acceptable, rendering fl_pg_order equal to 0, which is the case of a hard init when the page size is equal or larger than 65536. Accepting fl_large_pg equal to fl_small_pg solves the issue, and shouldn't cause any trouble besides a possible performance reduction when smaller pages are used. And that can be fixed by a configuration file. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-