- Sep 23, 2023
-
-
Vladimir Zapolskiy authored
[ Upstream commit 4aae44f6 ] Because LPC32xx PWM controllers have only a single output which is registered as the only PWM device/channel per controller, it is known in advance that pwm->hwpwm value is always 0. On basis of this fact simplify the code by removing operations with pwm->hwpwm, there is no controls which require channel number as input. Even though I wasn't aware at the time when I forward ported that patch, this fixes a null pointer dereference as lpc32xx->chip.pwms is NULL before devm_pwmchip_add() is called. Reported-by: Dan Carpenter <dan.carpenter@linaro.org> Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 3d2813fb ("pwm: lpc32xx: Don't modify HW state in .probe() after the PWM chip was registered") Signed-off-by: Thierry Reding <thierry.reding@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Raag Jadav authored
[ Upstream commit cf38e769 ] When built with CONFIG_INTEL_MID_WATCHDOG=m, currently the driver needs to be loaded manually, for the lack of module alias. This causes unintended resets in cases where watchdog timer is set-up by bootloader and the driver is not explicitly loaded. Add MODULE_ALIAS() to load the driver automatically at boot and avoid this issue. Fixes: 87a1ef80 ("watchdog: add Intel MID watchdog driver support") Signed-off-by: Raag Jadav <raag.jadav@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230811120220.31578-1-raag.jadav@intel.com Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Arnaldo Carvalho de Melo authored
[ Upstream commit ef23cb59 ] While debugging a segfault on 'perf lock contention' without an available perf.data file I noticed that it was basically calling: perf_session__delete(ERR_PTR(-1)) Resulting in: (gdb) run lock contention Starting program: /root/bin/perf lock contention [Thread debugging using libthread_db enabled] Using host libthread_db library "/lib64/libthread_db.so.1". failed to open perf.data: No such file or directory (try 'perf record' first) Initializing perf session failed Program received signal SIGSEGV, Segmentation fault. 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 2858 if (!session->auxtrace) (gdb) p session $1 = (struct perf_session *) 0xffffffffffffffff (gdb) bt #0 0x00000000005e7515 in auxtrace__free (session=0xffffffffffffffff) at util/auxtrace.c:2858 #1 0x000000000057bb4d in perf_session__delete (session=0xffffffffffffffff) at util/session.c:300 #2 0x000000000047c421 in __cmd_contention (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2161 #3 0x000000000047dc95 in cmd_lock (argc=0, argv=0x7fffffffe200) at builtin-lock.c:2604 #4 0x0000000000501466 in run_builtin (p=0xe597a8 <commands+552>, argc=2, argv=0x7fffffffe200) at perf.c:322 #5 0x00000000005016d5 in handle_internal_command (argc=2, argv=0x7fffffffe200) at perf.c:375 #6 0x0000000000501824 in run_argv (argcp=0x7fffffffe02c, argv=0x7fffffffe020) at perf.c:419 #7 0x0000000000501b11 in main (argc=2, argv=0x7fffffffe200) at perf.c:535 (gdb) So just set it to NULL after using PTR_ERR(session) to decode the error as perf_session__delete(NULL) is supported. The same problem was found in 'perf top' after an audit of all perf_session__new() failure handling. Fixes: 6ef81c55 ("perf session: Return error code for perf_session__new() function on failure") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com> Cc: Mukesh Ojha <mojha@codeaurora.org> Cc: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com> Cc: Shawn Landden <shawn@git.icu> Cc: Song Liu <songliubraving@fb.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com> Link: https://lore.kernel.org/lkml/ZN4Q2rxxsL08A8rd@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Sean Christopherson authored
[ Upstream commit 5df8ecfe ] Drop the explicit check on the extended CPUID level in cpu_has_svm(), the kernel's cached CPUID info will leave the entire SVM leaf unset if said leaf is not supported by hardware. Prior to using cached information, the check was needed to avoid false positives due to Intel's rather crazy CPUID behavior of returning the values of the maximum supported leaf if the specified leaf is unsupported. Fixes: 682a8108 ("x86/kvm/svm: Simplify cpu_has_svm()") Link: https://lore.kernel.org/r/20230721201859.2307736-13-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Arnaldo Carvalho de Melo authored
[ Upstream commit 979e9c9f ] In 616b14b4 ("perf build: Conditionally define NDEBUG") we started using NDEBUG=1 when DEBUG=1 isn't present, so code that is enclosed with assert() is not called. In dd317df0 ("perf build: Make binutil libraries opt in") we stopped linking against binutils-devel, for licensing reasons. Recently people asked me why annotation of BPF programs wasn't working, i.e. this: $ perf annotate bpf_prog_5280546344e3f45c_kfree_skb was returning: case SYMBOL_ANNOTATE_ERRNO__NO_LIBOPCODES_FOR_BPF: scnprintf(buf, buflen, "Please link with binutils's libopcode to enable BPF annotation"); This was on a fedora rpm, so its new enough that I had to try to test by rebuilding using BUILD_NONDISTRO=1, only to get it segfaulting on me. This combination made this libopcode function not to be called: assert(bfd_check_format(bfdf, bfd_object)); Changing it to: if (!bfd_check_format(bfdf, bfd_object)) abort(); Made it work, looking at this "check" function made me realize it changes the 'bfdf' internal state, i.e. we better call it. So stop using assert() on it, just call it and abort if it fails. Probably it is better to propagate the error, etc, but it seems it is unlikely to fail from the usage done so far and we really need to stop using libopcodes, so do the quick fix above and move on. With it we have BPF annotation back working when built with BUILD_NONDISTRO=1: ⬢[acme@toolbox perf-tools-next]$ perf annotate --stdio2 bpf_prog_5280546344e3f45c_kfree_skb | head No kallsyms or vmlinux with build-id 939bc71a1a51cdc434e60af93c7e734f7d5c0e7e was found Samples: 12 of event 'cpu-clock:ppp', 4000 Hz, Event count (approx.): 3000000, [percent: local period] bpf_prog_5280546344e3f45c_kfree_skb() bpf_prog_5280546344e3f45c_kfree_skb Percent int kfree_skb(struct trace_event_raw_kfree_skb *args) { nop 33.33 xchg %ax,%ax push %rbp mov %rsp,%rbp sub $0x180,%rsp push %rbx push %r13 ⬢[acme@toolbox perf-tools-next]$ Fixes: 6987561c ("perf annotate: Enable annotation of BPF programs") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mohamed Mahmoud <mmahmoud@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Dave Tucker <datucker@redhat.com> Cc: Derek Barbosa <debarbos@redhat.com> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/lkml/ZMrMzoQBe0yqMek1@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Konstantin Meskhidze authored
[ Upstream commit a3b7039b ] Buffer 'new_argv' is accessed without bound check after accessing with bound check via 'new_argc' index. Fixes: e298f3b4 ("kconfig: add built-in function support") Co-developed-by: Ivanov Mikhail <ivanov.mikhail1@huawei-partners.com> Signed-off-by: Konstantin Meskhidze <konstantin.meskhidze@huawei.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Fedor Pchelkin authored
commit 96562c45 upstream. It is an almost improbable error case but when page allocating loop in nfs4_get_device_info() fails then we should only free the already allocated pages, as __free_page() can't deal with NULL arguments. Found by Linux Verification Center (linuxtesting.org). Cc: stable@vger.kernel.org Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru> Reviewed-by: Benjamin Coddington <bcodding@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Lew authored
commit 8d207400 upstream. The QMI TLV value for strings in a lot of qmi element info structures account for null terminated strings with MAX_LEN + 1. If a string is actually MAX_LEN + 1 length, this will cause an out of bounds access when the NULL character is appended in decoding. Fixes: 9b8a11e8 ("soc: qcom: Introduce QMI encoder/decoder") Cc: stable@vger.kernel.org Signed-off-by: Chris Lew <quic_clew@quicinc.com> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com> Link: https://lore.kernel.org/r/20230801064712.3590128-1-quic_ipkumar@quicinc.com Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dmitry Baryshkov authored
commit 1583694b upstream. The pll0_vote clock definitely should have pll0 as a parent (instead of pll8). Fixes: 7792a8d6 ("clk: mdm9615: Add support for MDM9615 Clock Controllers") Cc: stable@kernel.org Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Link: https://lore.kernel.org/r/20230512211727.3445575-7-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson <andersson@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 358ad816 upstream. Older PA-RISC machines have LEDs which show the disk- and LAN-activity. The computation is done in software and takes quite some time, e.g. on a J6500 this may take up to 60% time of one CPU if the machine is loaded via network traffic. Since most people don't care about the LEDs, start with LEDs disabled and just show a CPU heartbeat LED. The disk and LAN LEDs can be turned on manually via /proc/pdc/led. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 4db89524 upstream. Fix the LAN receive and LAN transmit LEDs, which where swapped up to now. Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andrew Donnellan authored
commit efb78fa8 upstream. test_pages() tests the page allocator by calling alloc_pages() with different orders up to order 10. However, different architectures and platforms support different maximum contiguous allocation sizes. The default maximum allocation order (MAX_ORDER) is 10, but architectures can use CONFIG_ARCH_FORCE_MAX_ORDER to override this. On platforms where this is less than 10, test_meminit() will blow up with a WARN(). This is expected, so let's not do that. Replace the hardcoded "10" with the MAX_ORDER macro so that we test allocations up to the expected platform limit. Link: https://lkml.kernel.org/r/20230714015238.47931-1-ajd@linux.ibm.com Fixes: 5015a300 ("lib: introduce test_meminit module") Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com> Reviewed-by: Alexander Potapenko <glider@google.com> Cc: Xiaoke Wang <xkernel.wang@foxmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Zimmermann authored
commit 4cfe75f0 upstream. Fix the test for the AST2200 in the DRAM initialization. The value in ast->chip has to be compared against an enum constant instead of a numerical value. This bug got introduced when the driver was first imported into the kernel. Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 312fec14 ("drm: Initial KMS driver for AST (ASpeed Technologies) 2000 series (v2)") Cc: Dave Airlie <airlied@redhat.com> Cc: dri-devel@lists.freedesktop.org Cc: <stable@vger.kernel.org> # v3.5+ Reviewed-by: Sui Jingfeng <suijingfeng@loongson.cn> Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com> Tested-by: Jocelyn Falempe <jfalempe@redhat.com> # AST2600 Link: https://patchwork.freedesktop.org/patch/msgid/20230621130032.3568-2-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Zimmermann authored
commit f90a0e52 upstream. Do not assing the Linux device to struct fb_info.dev. The call to register_framebuffer() initializes the field to the fbdev device. Drivers should not override its value. Fixes a bug where the driver incorrectly decreases the hardware device's reference counter and leaks the fbdev device. v2: * add Fixes tag (Dan) Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Fixes: 88017bda ("ep93xx video driver") Cc: <stable@vger.kernel.org> # v2.6.32+ Reviewed-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230613110953.24176-15-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Manish Rangankar authored
commit e9105c4b upstream. User accidently passed module parameter ql2xenabledif=1 which is unsupported. However, driver still initialized which lead to guard tag errors during device discovery. Remove unsupported ql2xenabledif=1 option and validate the user input. Cc: stable@vger.kernel.org Signed-off-by: Manish Rangankar <mrangankar@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230821130045.34850-7-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Quinn Tran authored
commit 8ebaa451 upstream. Some consider noisy log as test failure. Turn off noisy message log. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230714070104.40052-8-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Quinn Tran authored
commit 5b51f35d upstream. Link up failure occurred where driver failed to see certain events from FW indicating link up (AEN 8011) and fabric login completion (AEN 8014). Without these 2 events, driver would not proceed forward to scan the fabric. The cause of this is due to delay in the receive of interrupt for Mailbox 60 that causes qla to set the fw_started flag late. The late setting of this flag causes other interrupts to be dropped. These dropped interrupts happen to be the link up (AEN 8011) and fabric login completion (AEN 8014). Set fw_started flag early to prevent interrupts being dropped. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230714070104.40052-6-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Quinn Tran authored
commit 009e7fe4 upstream. Different behavior were experienced of session being torn down vs not when TMF is timed out. When FW detects the time out, the session is torn down. When driver detects the time out, the session is not torn down. Allow TMF error to return to upper layer without session tear down. Cc: stable@vger.kernel.org Signed-off-by: Quinn Tran <qutran@marvell.com> Signed-off-by: Nilesh Javali <njavali@marvell.com> Link: https://lore.kernel.org/r/20230714070104.40052-10-njavali@marvell.com Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Quan Tian authored
commit a5e2151f upstream. __skb_get_hash_symmetric() was added to compute a symmetric hash over the protocol, addresses and transport ports, by commit eb70db87 ("packet: Use symmetric hash for PACKET_FANOUT_HASH."). It uses flow_keys_dissector_symmetric_keys as the flow_dissector to incorporate IPv4 addresses, IPv6 addresses and ports. However, it should not specify the flag as FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL, which stops further dissection when an IPv6 flow label is encountered, making transport ports not being incorporated in such case. As a consequence, the symmetric hash is based on 5-tuple for IPv4 but 3-tuple for IPv6 when flow label is present. It caused a few problems, e.g. when nft symhash and openvswitch l4_sym rely on the symmetric hash to perform load balancing as different L4 flows between two given IPv6 addresses would always get the same symmetric hash, leading to uneven traffic distribution. Removing the use of FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL makes sure the symmetric hash is based on 5-tuple for both IPv4 and IPv6 consistently. Fixes: eb70db87 ("packet: Use symmetric hash for PACKET_FANOUT_HASH.") Reported-by: Lars Ekman <uablrek@gmail.com> Closes: https://github.com/antrea-io/antrea/issues/5457 Signed-off-by: Quan Tian <qtian@vmware.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jia Yang authored
commit da62cb72 upstream. I got a use-after-free report when doing some fuzz test: If ttm_bo_init() fails, the "gbo" and "gbo->bo.base" will be freed by ttm_buffer_object_destroy() in ttm_bo_init(). But then drm_gem_vram_create() and drm_gem_vram_init() will free "gbo" and "gbo->bo.base" again. BUG: KMSAN: use-after-free in drm_vma_offset_remove+0xb3/0x150 CPU: 0 PID: 24282 Comm: syz-executor.1 Tainted: G B W 5.7.0-rc4-msan #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Ubuntu-1.8.2-1ubuntu1 04/01/2014 Call Trace: __dump_stack dump_stack+0x1c9/0x220 kmsan_report+0xf7/0x1e0 __msan_warning+0x58/0xa0 drm_vma_offset_remove+0xb3/0x150 drm_gem_free_mmap_offset drm_gem_object_release+0x159/0x180 drm_gem_vram_init drm_gem_vram_create+0x7c5/0x990 drm_gem_vram_fill_create_dumb drm_gem_vram_driver_dumb_create+0x238/0x590 drm_mode_create_dumb drm_mode_create_dumb_ioctl+0x41d/0x450 drm_ioctl_kernel+0x5a4/0x710 drm_ioctl+0xc6f/0x1240 vfs_ioctl ksys_ioctl __do_sys_ioctl __se_sys_ioctl+0x2e9/0x410 __x64_sys_ioctl+0x4a/0x70 do_syscall_64+0xb8/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x4689b9 Code: fd e0 fa ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb e0 fa ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f368fa4dc98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 000000000076bf00 RCX: 00000000004689b9 RDX: 0000000020000240 RSI: 00000000c02064b2 RDI: 0000000000000003 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00000000004d17e0 R14: 00007f368fa4e6d4 R15: 000000000076bf0c Uninit was created at: kmsan_save_stack_with_flags kmsan_internal_poison_shadow+0x66/0xd0 kmsan_slab_free+0x6e/0xb0 slab_free_freelist_hook slab_free kfree+0x571/0x30a0 drm_gem_vram_destroy ttm_buffer_object_destroy+0xc8/0x130 ttm_bo_release kref_put ttm_bo_put+0x117d/0x23e0 ttm_bo_init_reserved+0x11c0/0x11d0 ttm_bo_init+0x289/0x3f0 drm_gem_vram_init drm_gem_vram_create+0x775/0x990 drm_gem_vram_fill_create_dumb drm_gem_vram_driver_dumb_create+0x238/0x590 drm_mode_create_dumb drm_mode_create_dumb_ioctl+0x41d/0x450 drm_ioctl_kernel+0x5a4/0x710 drm_ioctl+0xc6f/0x1240 vfs_ioctl ksys_ioctl __do_sys_ioctl __se_sys_ioctl+0x2e9/0x410 __x64_sys_ioctl+0x4a/0x70 do_syscall_64+0xb8/0x160 entry_SYSCALL_64_after_hwframe+0x44/0xa9 If ttm_bo_init() fails, the "gbo" will be freed by ttm_buffer_object_destroy() in ttm_bo_init(). But then drm_gem_vram_create() and drm_gem_vram_init() will free "gbo" again. Reported-by: Hulk Robot <hulkci@huawei.com> Reported-by: butt3rflyh4ck <butterflyhuangxx@gmail.com> Cc: x kaneiki <xkaneiki@gmail.com> Signed-off-by: Jia Yang <jiayang5@huawei.com> Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20200714083238.28479-2-tzimmermann@suse.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tom Rix authored
commit 23970a1c upstream. The clang build reports this error fs/udf/inode.c:805:6: error: variable 'newblock' is used uninitialized whenever 'if' condition is true [-Werror,-Wsometimes-uninitialized] if (*err < 0) ^~~~~~~~ newblock is never set before error handling jump. Initialize newblock to 0 and remove redundant settings. Fixes: d8b39db5fab8 ("udf: Handle error when adding extent to a file") Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Tom Rix <trix@redhat.com> Signed-off-by: Jan Kara <jack@suse.cz> Message-Id: <20221230175341.1629734-1-trix@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Marco Felsch authored
[ Upstream commit 23e60c8d ] According the "USB Type-C Port Controller Interface Specification v2.0" the TCPC sets the fault status register bit-7 (AllRegistersResetToDefault) once the registers have been reset to their default values. This triggers an alert(-irq) on PTN5110 devices albeit we do mask the fault-irq, which may cause a kernel hang. Fix this generically by writing a one to the corresponding bit-7. Cc: stable@vger.kernel.org Fixes: 74e656d6 ("staging: typec: Type-C Port Controller Interface driver (tcpci)") Reported-by: "Angus Ainslie (Purism)" <angus@akkea.ca> Closes: https://lore.kernel.org/all/20190508002749.14816-2-angus@akkea.ca/ Reported-by: Christian Bach <christian.bach@scs.ch> Closes: https://lore.kernel.org/regressions/ZR0P278MB07737E5F1D48632897D51AC3EB329@ZR0P278MB0773.CHEP278.PROD.OUTLOOK.COM/t/ Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20230816172502.1155079-1-festevam@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Hugo Villeneuve authored
[ Upstream commit 2861ed4d ] The sc16is7xx_config_rs485() function is called only for the second port (index 1, channel B), causing initialization problems for the first port. For the sc16is7xx driver, port->membase and port->mapbase are not set, and their default values are 0. And we set port->iobase to the device index. This means that when the first device is registered using the uart_add_one_port() function, the following values will be in the port structure: port->membase = 0 port->mapbase = 0 port->iobase = 0 Therefore, the function uart_configure_port() in serial_core.c will exit early because of the following check: /* * If there isn't a port here, don't do anything further. */ if (!port->iobase && !port->mapbase && !port->membase) return; Typically, I2C and SPI drivers do not set port->membase and port->mapbase. The max310x driver sets port->membase to ~0 (all ones). By implementing the same change in this driver, uart_configure_port() is now correctly executed for all ports. Fixes: dfeae619 ("serial: sc16is7xx") Cc: stable@vger.kernel.org Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Reviewed-by: Lech Perczak <lech.perczak@camlingroup.com> Tested-by: Lech Perczak <lech.perczak@camlingroup.com> Link: https://lore.kernel.org/r/20230807214556.540627-2-hugo@hugovil.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Daniel Mack authored
[ Upstream commit 5da6b1c0 ] Some derivates of sc16is7xx devices expose more than one tty device to userspace. If multiple such devices exist in a system, userspace currently has no clean way to infer which tty maps to which physical line. Set the .iobase value to the relative index within the device to allow infering the order through sysfs. Signed-off-by: Daniel Mack <daniel@zonque.org> Link: https://lore.kernel.org/r/20200901120329.4176302-1-daniel@zonque.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Stable-dep-of: 2861ed4d ("serial: sc16is7xx: fix broken port 0 uart init") Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Gustavo A. R. Silva authored
commit e520d0b6 upstream. Allocate extra space for terminating element at: drivers/cpufreq/brcmstb-avs-cpufreq.c: 449 table[i].frequency = CPUFREQ_TABLE_END; and add code comment to make this clear. This fixes the following -Warray-bounds warning seen after building ARM with multi_v7_defconfig (GCC 13): In function 'brcm_avs_get_freq_table', inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15: drivers/cpufreq/brcmstb-avs-cpufreq.c:449:28: warning: array subscript 5 is outside array bounds of 'void[60]' [-Warray-bounds=] 449 | table[i].frequency = CPUFREQ_TABLE_END; In file included from include/linux/node.h:18, from include/linux/cpu.h:17, from include/linux/cpufreq.h:12, from drivers/cpufreq/brcmstb-avs-cpufreq.c:44: In function 'devm_kmalloc_array', inlined from 'devm_kcalloc' at include/linux/device.h:328:9, inlined from 'brcm_avs_get_freq_table' at drivers/cpufreq/brcmstb-avs-cpufreq.c:437:10, inlined from 'brcm_avs_cpufreq_init' at drivers/cpufreq/brcmstb-avs-cpufreq.c:623:15: include/linux/device.h:323:16: note: at offset 60 into object of size 60 allocated by 'devm_kmalloc' 323 | return devm_kmalloc(dev, bytes, flags); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This helps with the ongoing efforts to tighten the FORTIFY_SOURCE routines on memcpy() and help us make progress towards globally enabling -Warray-bounds. Link: https://github.com/KSPP/linux/issues/324 Fixes: de322e08 ("cpufreq: brcmstb-avs-cpufreq: AVS CPUfreq driver for Broadcom STB SoCs") Cc: stable@vger.kernel.org Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thomas Bourgoin authored
commit d9c83f71 upstream. We were reading the length of the scatterlist sg after copying value of tsg inside. So we are using the size of the previous scatterlist and for the first one we are using an unitialised value. Fix this by copying tsg in sg[0] before reading the size. Fixes : 8a1012d3 ("crypto: stm32 - Support for STM32 HASH module") Cc: stable@vger.kernel.org Signed-off-by: Thomas Bourgoin <thomas.bourgoin@foss.st.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sven Schnelle authored
commit ea5717cb upstream. OS installers are relying on /sys/firmware/ipl/has_secure to be present on machines supporting secure boot. This file is present for all IPL types, but not the unknown type, which prevents a secure installation when an LPAR is booted in HMC via FTP(s), because this is an unknown IPL type in linux. While at it, also add the secure file. Fixes: c9896acc ("s390/ipl: Provide has_secure sysfs attribute") Cc: stable@vger.kernel.org Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Enlin Mu authored
commit fe8c3623 upstream. After commit 30696378 ("pstore/ram: Do not treat empty buffers as valid"), initialization would assume a prz was valid after seeing that the buffer_size is zero (regardless of the buffer start position). This unchecked start value means it could be outside the bounds of the buffer, leading to future access panics when written to: sysdump_panic_event+0x3b4/0x5b8 atomic_notifier_call_chain+0x54/0x90 panic+0x1c8/0x42c die+0x29c/0x2a8 die_kernel_fault+0x68/0x78 __do_kernel_fault+0x1c4/0x1e0 do_bad_area+0x40/0x100 do_translation_fault+0x68/0x80 do_mem_abort+0x68/0xf8 el1_da+0x1c/0xc0 __raw_writeb+0x38/0x174 __memcpy_toio+0x40/0xac persistent_ram_update+0x44/0x12c persistent_ram_write+0x1a8/0x1b8 ramoops_pstore_write+0x198/0x1e8 pstore_console_write+0x94/0xe0 ... To avoid this, also check if the prz start is 0 during the initialization phase. If not, the next prz sanity check case will discover it (start > size) and zap the buffer back to a sane state. Fixes: 30696378 ("pstore/ram: Do not treat empty buffers as valid") Cc: Yunlong Xing <yunlong.xing@unisoc.com> Cc: stable@vger.kernel.org Signed-off-by: Enlin Mu <enlin.mu@unisoc.com> Link: https://lore.kernel.org/r/20230801060432.1307717-1-yunlong.xing@unisoc.com [kees: update commit log with backtrace and clarifications] Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Biggers authored
commit 919dc320 upstream. If an fsverity builtin signature is given for a file but the ".fs-verity" keyring is empty, there's no real reason to run the PKCS#7 parser. Skip this to avoid the PKCS#7 attack surface when builtin signature support is configured into the kernel but is not being used. This is a hardening improvement, not a fix per se, but I've added Fixes and Cc stable to get it out to more users. Fixes: 432434c9 ("fs-verity: support builtin file signatures") Cc: stable@vger.kernel.org Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Link: https://lore.kernel.org/r/20230820173237.2579-1-ebiggers@kernel.org Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolas Dichtel authored
commit a4f39c9f upstream. The goal is to support a bpf_redirect() from an ethernet device (ingress) to a ppp device (egress). The l2 header is added automatically by the ppp driver, thus the ethernet header should be removed. CC: stable@vger.kernel.org Fixes: 27b29f63 ("bpf: add bpf_redirect() helper") Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Tested-by: Siwar Zitouni <siwar.zitouni@6wind.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thore Sommer authored
commit ef5b52a6 upstream. When the hash algorithm for the signature is not available the digest size is 0 and the signature in the certificate is marked as unsupported. When validating a self-signed certificate, this needs to be checked, because otherwise trying to validate the signature will fail with an warning: Loading compiled-in X.509 certificates WARNING: CPU: 0 PID: 1 at crypto/rsa-pkcs1pad.c:537 \ pkcs1pad_verify+0x46/0x12c ... Problem loading in-kernel X.509 certificate (-22) Signed-off-by: Thore Sommer <public@thson.de> Cc: stable@vger.kernel.org # v4.7+ Fixes: 6c2dc5ae ("X.509: Extract signature digest and make self-signed cert checks earlier") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jann Horn authored
commit 977ad86c upstream. There was a previous attempt to fix an out-of-bounds access in the DCCP error handlers, but that fix assumed that the error handlers only want to access the first 8 bytes of the DCCP header. Actually, they also look at the DCCP sequence number, which is stored beyond 8 bytes, so an explicit pskb_may_pull() is required. Fixes: 6706a97f ("dccp: fix out of bound access in dccp_v4_err()") Fixes: 1aa9d1a0 ("ipv6: dccp: fix out of bound access in dccp_v6_err()") Cc: stable@vger.kernel.org Signed-off-by: Jann Horn <jannh@google.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alexander Aring authored
commit 7c53e847 upstream. All posix lock ops, for all lockspaces (gfs2 file systems) are sent to userspace (dlm_controld) through a single misc device. The dlm_controld daemon reads the ops from the misc device and sends them to other cluster nodes using separate, per-lockspace cluster api communication channels. The ops for a single lockspace are ordered at this level, so that the results are received in the same sequence that the requests were sent. When the results are sent back to the kernel via the misc device, they are again funneled through the single misc device for all lockspaces. When the dlm code in the kernel processes the results from the misc device, these results will be returned in the same sequence that the requests were sent, on a per-lockspace basis. A recent change in this request/reply matching code missed the "per-lockspace" check (fsid comparison) when matching request and reply, so replies could be incorrectly matched to requests from other lockspaces. Cc: stable@vger.kernel.org Reported-by: Barry Marson <bmarson@redhat.com> Fixes: 57e2c2f2 ("fs: dlm: fix mismatch of plock results from userspace") Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Helge Deller authored
commit 9f5ba4b3 upstream. The lscpu command is broken since commit cab56b51 ("parisc: Fix device names in /proc/iomem") added the PA pathname to all PA devices, includig the CPUs. lscpu parses /proc/cpuinfo and now believes it found different CPU types since every CPU is listed with an unique identifier (PA pathname). Fix this problem by simply dropping the PA pathname when listing the CPUs in /proc/cpuinfo. There is no need to show the pathname in this procfs file. Fixes: cab56b51 ("parisc: Fix device names in /proc/iomem") Signed-off-by: Helge Deller <deller@gmx.de> Cc: <stable@vger.kernel.org> # v4.9+ Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Aleksa Sarai authored
commit ccf61486 upstream. Due to an oversight in commit 1b3044e3 ("procfs: fix pthread cross-thread naming if !PR_DUMPABLE") in switching from REG to NOD, chmod operations on /proc/thread-self/comm were no longer blocked as they are on almost all other procfs files. A very similar situation with /proc/self/environ was used to as a root exploit a long time ago, but procfs has SB_I_NOEXEC so this is simply a correctness issue. Ref: https://lwn.net/Articles/191954/ Ref: 6d76fa58 ("Don't allow chmod() on the /proc/<pid>/ files") Fixes: 1b3044e3 ("procfs: fix pthread cross-thread naming if !PR_DUMPABLE") Cc: stable@vger.kernel.org # v4.7+ Signed-off-by: Aleksa Sarai <cyphar@cyphar.com> Message-Id: <20230713141001.27046-1-cyphar@cyphar.com> Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Bjorn Helgaas authored
commit 5260bd6d upstream. This reverts commit d5af729d. d5af729d ("PCI: Mark NVIDIA T4 GPUs to avoid bus reset") avoided Secondary Bus Reset on the T4 because the reset seemed to not work when the T4 was directly attached to a Root Port. But NVIDIA thinks the issue is probably related to some issue with the Root Port, not with the T4. The T4 provides neither PM nor FLR reset, so masking bus reset compromises this device for assignment scenarios. Revert d5af729d as requested by Wu Zongyong. This will leave SBR broken in the specific configuration Wu tested, as it was in v6.5, so Wu will debug that further. Link: https://lore.kernel.org/r/ZPqMCDWvITlOLHgJ@wuzongyong-alibaba Link: https://lore.kernel.org/r/20230908201104.GA305023@bhelgaas Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Jiang authored
commit 5a7693e6 upstream. ntb_transport_tx_free_entry() never returns 0 with the current calculation. If head == tail, then it would return qp->tx_max_entry. Change compare to tail >= head and when they are equal, a 0 would be returned. Fixes: e74bfeed ("NTB: Add flow control to the ntb_netdev") Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: renlonglong <ren.longlong@h3c.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Jiang authored
commit cc79bd27 upstream. The tx tail index is not reset when the link goes down. This causes the tail index to go out of sync when the link goes down and comes back up. Refactor the ntb_qp_link_down_reset() and reset the tail index as well. Fixes: 2849b5d7 ("NTB: Reset transport QP link stats on down") Reported-by: Yuan Y Lu <yuan.y.lu@intel.com> Tested-by: Yuan Y Lu <yuan.y.lu@intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Jiang authored
commit f195a1a6 upstream. Currently when the transport receive packets after netdev has closed the transport returns error and triggers tx errors to be incremented and carrier to be stopped. There is no reason to return error if the device is already closed. Drop the packet and return 0. Fixes: e26a5843 ("NTB: Split ntb_hw_intel and ntb_transport drivers") Reported-by: Yuan Y Lu <yuan.y.lu@intel.com> Tested-by: Yuan Y Lu <yuan.y.lu@intel.com> Reviewed-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
commit 86495af1 upstream. In commit 9011e49d ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules") the use of symbol_get is properly restricted to GPL-only marked symbols. This interacts oddly with the DVB logic which only uses dvb_attach() to load the dvb driver which then uses symbol_get(). Fix this up by properly marking all of the dvb_attach attach symbols as EXPORT_SYMBOL_GPL(). Fixes: 9011e49d ("modules: only allow symbol_get of EXPORT_SYMBOL_GPL modules") Cc: stable <stable@kernel.org> Reported-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: linux-media@vger.kernel.org Cc: linux-modules@vger.kernel.org Acked-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Link: https://lore.kernel.org/r/20230908092035.3815268-2-gregkh@linuxfoundation.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-