Unverified Commit f0c88450 authored by openeuler-ci-bot's avatar openeuler-ci-bot Committed by Gitee
Browse files

!13837 update patches for sw64 architecture 

Merge Pull Request from: @guzitao 
 
These patches generally cover the following tasks:

1.add sw8a support
2.improve sw6b support
3.support pcie hotplug
4.support acpi
5.support hardware mismatch processing
6.support perf pmu
7.support KVM (CPU hotplug, memory hotplug, tlb refresh, msi_domain, clock synchronization during live migration, start non-8M RAM alignment)

Test:
All features pass the test.

Related issues:
https://gitee.com/openeuler/kernel/issues/IB73UR 
 
Link:https://gitee.com/openeuler/kernel/pulls/13837

 

Reviewed-by: default avatarZhang Peng <zhangpeng362@huawei.com>
Signed-off-by: default avatarZhang Peng <zhangpeng362@huawei.com>
parents 40450653 37a27227

arch/sw_64/Kconfig

+47 −44
Original line number Diff line number Diff line
@@ -3,6 +3,7 @@ config SW64 
	bool

	default y

	select ACPI

	select ACPI_GENERIC_GSI if ACPI

	select ACPI_MCFG if (ACPI && PCI)

	select ACPI_REDUCED_HARDWARE_ONLY

	select ARCH_ATOMIC
@@ -102,12 +103,14 @@ config SW64 
	select HAVE_RELIABLE_STACKTRACE if STACKTRACE

	select HAVE_RSEQ

	select HAVE_SYSCALL_TRACEPOINTS

	select IRQ_DOMAIN

	select IRQ_FORCED_THREADING

	select LOCK_MM_AND_FIND_VMA

	select MEMORY_HOTPLUG_SPARSE if MEMORY_HOTPLUG

	select MODULES_USE_ELF_RELA

	select NO_BOOTMEM

	select OF_EARLY_FLATTREE if OF

	select OF

	select OF_EARLY_FLATTREE

	select OLD_SIGSUSPEND

	select PCI_DOMAINS_GENERIC if PCI

	select PCI_ECAM if (ACPI && PCI)
@@ -233,7 +236,6 @@ config PLATFORM_XUELANG 
	depends on UNCORE_XUELANG

	select SPARSE_IRQ

	select SYS_HAS_EARLY_PRINTK

	select SW64_INTC_V2

	select I2C_SUNWAY if I2C

	help

	  Sunway board chipset for C3B
@@ -243,6 +245,7 @@ config PLATFORM_JUNZHANG 
	depends on UNCORE_JUNZHANG

	select SPARSE_IRQ

	select SYS_HAS_EARLY_PRINTK

	select I2C_SUNWAY if I2C

	help

	  Sunway board chipset for C4
@@ -396,12 +399,13 @@ config SCHED_SMT 
	  places. If unsure say N here.



config NR_CPUS

	int "Maximum number of CPUs (2-256)"

	range 2 256

	int "Maximum number of CPUs (2-512)"

	range 2 512

	depends on SMP

	default "64" if UNCORE_XUELANG

	default "512" if UNCORE_JUNZHANG

	help

	  SW6 support can handle a maximum of 256 CPUs.

	  SW64 support can handle a maximum of 512 CPUs.



config HOTPLUG_CPU

	bool "Support for hot-pluggable CPUs"
@@ -506,13 +510,6 @@ endmenu 


menu "Boot options"



config USE_OF

	bool "Flattened Device Tree support"

	select OF

	select IRQ_DOMAIN

	help

	  Include support for flattened device tree machine descriptions.



config BUILTIN_DTB

	bool "Embed DTB in kernel image"

	depends on OF
@@ -529,8 +526,10 @@ config BUILTIN_DTB_NAME 


config EFI

	bool "UEFI runtime support"

	depends on OF

	select UCS2_STRING

	select EFI_RUNTIME_WRAPPERS

	select EFI_PARAMS_FROM_FDT

	default y

	help

	  This option provides support for runtime services provided
@@ -556,48 +555,52 @@ config DMI 
	  firmware need to be enabled. This would require the DMI subsystem

	  to be enabled much earlier than we do on ARM, which is non-trivial.



config CMDLINE_BOOL

	bool "Built-in kernel command line"

config CMDLINE

	string "Built-in kernel command line"

	default ""

	help

	  Allow for specifying boot arguments to the kernel at

	  build time. On some systems (e.g. embedded ones), it is

	  necessary or convenient to provide some or all of the

	  kernel boot arguments with the kernel itself (that is,

	  to not rely on the boot loader to provide them.)

	  Allow for specifying boot arguments to the kernel at build

	  time. On some systems (e.g. embedded ones), it is necessary

	  or convenient to provide some or all of the kernel boot

	  arguments with the kernel itself (that is, to not rely on

	  firmware to provide them.)



	  To compile command line arguments into the kernel,

	  set this option to 'Y', then fill in the

	  boot arguments in CONFIG_CMDLINE.

	  Enter arguments here that should be compiled into the kernel

	  image. And choose how the kernel should use it later on.



	  Systems with fully functional boot loaders (i.e. non-embedded)

	  should leave this option set to 'N'.

	  In most cases, the command line (whether built-in or provided

	  by firmware) should specify the device for the root file system.



config CMDLINE

	string "Built-in kernel command string"

	depends on CMDLINE_BOOL

	default ""

choice

	prompt "Built-in kernel command line usage" if CMDLINE != ""

	default CMDLINE_FROM_FIRMWARE

	help

	  Enter arguments here that should be compiled into the kernel

	  image and used at boot time. If the boot loader provides a

	  command line at boot time, it is appended to this string to

	  form the full kernel command line, when the system boots.

	  Choose how the kernel will handle the provided built-in kernel

	  command line.



	  However, you can use the CONFIG_CMDLINE_OVERRIDE option to

	  change this behavior.

config CMDLINE_FROM_FIRMWARE

	bool "Use kernel command line provided by firmware"

	help

	  Use kernel command line provided by firmware. If the firmware

	  doesn't provide any, the built-in kernel command line provided

	  in CMDLINE will be used.



	  In most cases, the command line (whether built-in or provided

	  by the boot loader) should specify the device for the root

	  file system.

config CMDLINE_EXTEND

	bool "Extend kernel command line"

	help

	  The built-in kernel command line will be appended to the command

	  line provided by firmware. This is useful in cases where the

	  command line provided by firmware is insufficient and you don't

	  want to or cannot modify them.



config CMDLINE_OVERRIDE

	bool "Built-in command line overrides boot loader arguments"

	depends on CMDLINE_BOOL

config CMDLINE_FORCE

	bool "Always use built-in kernel command line"

	help

	  Set this option to 'Y' to have the kernel ignore the boot loader

	  command line, and use ONLY the built-in command line.

	  Always use built-in kernel command line, even if we get one

	  from firmware. This is useful in some cases. For example,

	  you need to work around broken boot loaders.



	  This is used to work around broken boot loaders. This should

	  be set to 'N' under normal conditions.

endchoice



config FORCE_MAX_ZONEORDER

	int

arch/sw_64/Makefile

+1 −1
Original line number Diff line number Diff line
@@ -28,7 +28,7 @@ endif 
CHECKFLAGS	+= -D__sw__

cflags-y	:= -pipe -ffixed-8 -mno-fp-regs #-msmall-data

ifeq ($(CONFIG_SUBARCH_C4),y)

	cflags-y += -fsw-rev

	cflags-y += -fsw-rev -fno-sw-unalign-byte

endif

cflags-y	+= $(call cc-option, -fno-jump-tables)

arch/sw_64/boot/dts/chip3.dts

+36 −34
Original line number Diff line number Diff line
@@ -10,6 +10,9 @@ 
	#address-cells = <2>;

	#size-cells = <2>;



	chosen {

	};



	soc {

		compatible = "simple-bus";

		#address-cells = <2>;
@@ -32,9 +35,14 @@ 


		};



		intc: interrupt-controller {

			compatible = "sw64,sw6_irq_controller";

		pintc: interrupt-controller {

			compatible = "sw64,pintc", "sw64,sw6_irq_controller";

			interrupt-controller;

			sw64,node = <0>;

			sw64,irq-num = <8>;

			sw64,ver = <1>;

			reg = <0x802a 0x0 0x0 0x1680>,

			      <0x8030 0x0 0x0 0x8f00>;

			#interrupt-cells = <1>;

		};
@@ -42,8 +50,11 @@ 
			compatible = "sw64,lpc_intc";

			reg = <0x8037 0x40000000 0x0 0x8000>;

			interrupt-controller;

			sw64,node = <0>;

			sw64,irq-num = <16>;

			sw64,ver = <1>;

			#interrupt-cells = <1>;

			interrupt-parent = <&intc>;

			interrupt-parent = <&pintc>;

			interrupts = <2>;

		};
@@ -52,7 +63,7 @@ 
			#size-cells = <2>;

			compatible = "sw6,sunway-apb-uart";

			reg = <0x8033 0x0 0x0 0x1000>;

			interrupt-parent=<&intc>;

			interrupt-parent=<&pintc>;

			interrupts = <3>;

			reg-shift = <9>;

			reg-io-width = <4>;
@@ -75,11 +86,11 @@ 
		i2c0@0x8031 {

			#address-cells = <2>;

			#size-cells = <2>;

			compatible = "snps,designware-i2c";

			compatible = "sunway,suntai-i2c", "snps,designware-i2c";

			reg = <0x8031 0x0 0x0 0x8000>;

			clock-frequency = <100000>;

			clocks = <&i2cclk>;

			interrupt-parent=<&intc>;

			interrupt-parent = <&pintc>;

			interrupts = <5>;

			status = "okay";

		};
@@ -87,11 +98,11 @@ 
		i2c1@0x8034 {

			#address-cells = <1>;

			#size-cells = <0>;

			compatible = "snps,designware-i2c";

			compatible = "sunway,suntai-i2c", "snps,designware-i2c";

			reg = <0x8034 0x0 0x0 0x8000>;

			clock-frequency = <100000>;

			clocks = <&i2cclk>;

			interrupt-parent=<&intc>;

			interrupt-parent = <&pintc>;

			interrupts = <6>;

			status = "okay";

		};
@@ -99,11 +110,11 @@ 
		i2c2@0x8035 {

			#address-cells = <1>;

			#size-cells = <0>;

			compatible = "snps,designware-i2c";

			compatible = "sunway,suntai-i2c", "snps,designware-i2c";

			reg = <0x8035 0x0 0x0 0x8000>;

			clock-frequency = <100000>;

			clocks = <&i2cclk>;

			interrupt-parent=<&intc>;

			interrupt-parent = <&pintc>;

			interrupts = <7>;

			status = "okay";
@@ -127,24 +138,20 @@ 
			};



		spi: spi@0x8032 {

			#address-cells = <2>;

			#size-cells = <2>;

			compatible = "sunway,chip3-spi";

			#address-cells = <1>;

			#size-cells = <0>;

			compatible = "sunway,chip-spi";

			reg = <0x8032 0x0 0x0 0x8000>;

			clocks = <&spiclk>;

			interrupt-parent=<&intc>;

			interrupts = <4>;

			poll_mode = <1>;    /* poll_mode:1  interrupt mode: 0 */

			reg-io-width = <2>;

			status = "okay";



			flash@0 {

				compatible = "winbond,w25q32dw", "jedec,spi-flash";

				compatible = "winbond,w25q32dw", "jedec,spi-nor";

				spi-max-frequency = <25000000>;

				m25p,fast-read;

				spi-cpha;

				spi-cpol;

				poll_mode = <1>; /* poll_mode:1  interrupt mode: 0 */

				reg-io-width = <2>;

				reg = <0 0 0 0 >; /* 0: flash chip selected bit */

				reg = <0>; /* 0: flash chip selected bit */



				partitions {

					compatible = "fixed-partitions";
@@ -159,14 +166,10 @@ 
			};



			flash@1 {

				compatible = "winbond,w25q32dw", "jedec,spi-flash";

				compatible = "winbond,w25q32dw", "jedec,spi-nor";

				spi-max-frequency = <25000000>;

				m25p,fast-read;

				spi-cpha;

				spi-cpol;

				poll_mode = <1>; /* poll_mode:1  interrupt mode: 0 */

				reg-io-width = <2>;

				reg = <1 0 0 0 >; /* 1: flash chip selected bit */

				reg = <1>; /* 1: flash chip selected bit */



				partitions {

					compatible = "fixed-partitions";
@@ -231,8 +234,7 @@ 
				reg = <0 0 0 0>;

				interrupt-controller;

				#interrupt-cells = <2>;

				interrupt-parent=<&intc>;

				interrupts = <0>;

				interrupts-extended = <&pintc 0>, <&pintc 1>;

			};

		};

arch/sw_64/boot/dts/chip_vt.dts

+16 −8
Original line number Diff line number Diff line
@@ -10,15 +10,21 @@ 
	#address-cells = <2>;

	#size-cells = <2>;



	chosen {

	};



	soc {

		compatible = "simple-bus";

		#address-cells = <2>;

		#size-cells = <2>;

		ranges;



		intc: interrupt-controller{

			compatible = "sw64,sw6_irq_vt_controller";

		pintc: interrupt-controller {

			compatible = "sw64,pintc_vt", "sw64,sw6_irq_vt_controller";

			interrupt-controller;

			sw64,node = <0>;

			sw64,irq-num = <16>;

			sw64,ver = <1>;

			#interrupt-cells = <1>;

		};
@@ -27,25 +33,27 @@ 
			#size-cells = <2>;

			compatible = "ns16550a";

			reg = <0x8801 0x3f8 0x0 0x10>;

			interrupt-parent=<&intc>;

			interrupt-parent = <&pintc>;

			interrupts = <12>;

			reg-shift = <0>;

			reg-io-width = <1>;

			clock-frequency = <24000000>;

			status = "okay";

		};



		misc: misc0@8036 {

			#address-cells = <2>;

			#size-cells = <2>;

			compatible = "sw6,sunway-ged";

			reg = <0x8036 0x0 0x0 0x20>;

			interrupt-parent=<&intc>;

			interrupt-parent = <&pintc>;

			interrupts = <13>;

			reg-shift = <0>;

			reg-io-width = <8>;

			clock-frequency = <24000000>;

			status = "okay";

		};



		fw_cfg: fw_cfg@8049 {

			dma-coherent;

			reg = <0x8049 0x20000000 0x0 0x18>;

arch/sw_64/boot/dts/empty.dts

+7 −4
Original line number Diff line number Diff line
@@ -10,6 +10,9 @@ 
	#address-cells = <2>;

	#size-cells = <2>;



	chosen {

	};



	soc {

	};

};