Commit dfcd1b6f authored by Alexander Stein's avatar Alexander Stein Committed by Shawn Guo
Browse files

arm64: dts: freescale: add initial device tree for TQMa8MQML with i.MX8MM 



This adds support for TQMa8MQML module on MBa8Mx board.

Signed-off-by: default avatarAlexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent a6e917b7

arch/arm64/boot/dts/freescale/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -40,6 +40,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-ctouch2.dtb 
dtb-$(CONFIG_ARCH_MXC) += imx8mm-icore-mx8mm-edimm2.2.dtb

dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-n801x-s.dtb

dtb-$(CONFIG_ARCH_MXC) += imx8mm-nitrogen-r2.dtb

dtb-$(CONFIG_ARCH_MXC) += imx8mm-tqma8mqml-mba8mx.dtb

dtb-$(CONFIG_ARCH_MXC) += imx8mm-var-som-symphony.dtb

dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw71xx-0x.dtb

dtb-$(CONFIG_ARCH_MXC) += imx8mm-venice-gw72xx-0x.dtb

arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml-mba8mx.dts

0 → 100644
+253 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)

/*

 * Copyright 2020-2021 TQ-Systems GmbH

 */



/dts-v1/;



#include "imx8mm-tqma8mqml.dtsi"

#include "mba8mx.dtsi"



/ {

	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML on MBa8Mx";

	compatible = "tq,imx8mm-tqma8mqml-mba8mx", "tq,imx8mm-tqma8mqml", "fsl,imx8mm";



	aliases {

		eeprom0 = &eeprom3;

		mmc0 = &usdhc3;

		mmc1 = &usdhc2;

		mmc2 = &usdhc1;

		rtc0 = &pcf85063;

		rtc1 = &snvs_rtc;

	};



	reg_usdhc2_vmmc: regulator-vmmc {

		compatible = "regulator-fixed";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;

		regulator-name = "VSD_3V3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;

		enable-active-high;

		startup-delay-us = <100>;

		off-on-delay-us = <12000>;

	};



	extcon_usbotg1: extcon-usbotg1 {

		compatible = "linux,extcon-usb-gpio";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_usb1_extcon>;

		id-gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;

	};

};



&i2c1 {

	expander2: gpio@27 {

		compatible = "nxp,pca9555";

		reg = <0x27>;

		gpio-controller;

		#gpio-cells = <2>;

		vcc-supply = <&reg_vcc_3v3>;

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_expander>;

		interrupt-parent = <&gpio1>;

		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;

		interrupt-controller;

		#interrupt-cells = <2>;

	};

};



&sai3 {

	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;

	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;

	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";

	clocks = <&clk IMX8MM_CLK_SAI3_IPG>, <&clk IMX8MM_CLK_DUMMY>,

		<&clk IMX8MM_CLK_SAI3_ROOT>, <&clk IMX8MM_CLK_DUMMY>,

		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,

		<&clk IMX8MM_AUDIO_PLL2_OUT>;

};



&tlv320aic3x04 {

	clock-names = "mclk";

	clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;

};



&uart1 {

	assigned-clocks = <&clk IMX8MM_CLK_UART1>;

	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;

};



&uart2 {

	assigned-clocks = <&clk IMX8MM_CLK_UART2>;

	assigned-clock-parents = <&clk IMX8MM_SYS_PLL1_80M>;

};



&usbotg1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_usbotg1>;

	dr_mode = "otg";

	extcon = <&extcon_usbotg1>;

	srp-disable;

	hnp-disable;

	adp-disable;

	power-active-high;

	over-current-active-low;

	status = "okay";

};



&usbotg2 {

	dr_mode = "host";

	disable-over-current;

	vbus-supply = <&reg_hub_vbus>;

	status = "okay";

};



&iomuxc {

	pinctrl_ecspi1: ecspi1grp {

		fsl,pins = <MX8MM_IOMUXC_ECSPI1_SCLK_ECSPI1_SCLK	0x00000006>,

			   <MX8MM_IOMUXC_ECSPI1_MOSI_ECSPI1_MOSI	0x00000006>,

			   <MX8MM_IOMUXC_ECSPI1_MISO_ECSPI1_MISO	0x00000006>,

			   <MX8MM_IOMUXC_ECSPI1_SS0_GPIO5_IO9		0x00000006>;

	};



	pinctrl_ecspi2: ecspi2grp {

		fsl,pins = <MX8MM_IOMUXC_ECSPI2_SCLK_ECSPI2_SCLK	0x00000006>,

			   <MX8MM_IOMUXC_ECSPI2_MOSI_ECSPI2_MOSI	0x00000006>,

			   <MX8MM_IOMUXC_ECSPI2_MISO_ECSPI2_MISO	0x00000006>,

			   <MX8MM_IOMUXC_ECSPI2_SS0_GPIO5_IO13		0x00000006>;

	};



	pinctrl_expander: expandergrp {

		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO09_GPIO1_IO9		0x94>;

	};



	pinctrl_fec1: fec1grp {

		fsl,pins = <MX8MM_IOMUXC_ENET_MDC_ENET1_MDC		0x40000002>,

			   <MX8MM_IOMUXC_ENET_MDIO_ENET1_MDIO		0x40000002>,

			   <MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3	0x14>,

			   <MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2	0x14>,

			   <MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1	0x14>,

			   <MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0	0x14>,

			   <MX8MM_IOMUXC_ENET_RD3_ENET1_RGMII_RD3	0x90>,

			   <MX8MM_IOMUXC_ENET_RD2_ENET1_RGMII_RD2	0x90>,

			   <MX8MM_IOMUXC_ENET_RD1_ENET1_RGMII_RD1	0x90>,

			   <MX8MM_IOMUXC_ENET_RD0_ENET1_RGMII_RD0	0x90>,

			   <MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC	0x14>,

			   <MX8MM_IOMUXC_ENET_RXC_ENET1_RGMII_RXC	0x90>,

			   <MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90>,

			   <MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x14>;

	};



	pinctrl_gpiobutton: gpiobuttongrp {

		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO05_GPIO1_IO5		0x84>,

			   <MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x84>,

			   <MX8MM_IOMUXC_SD1_CLK_GPIO2_IO0		0x84>;

	};



	pinctrl_gpioled: gpioledgrp {

		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO00_GPIO1_IO0		0x84>,

			   <MX8MM_IOMUXC_NAND_DQS_GPIO3_IO14		0x84>;

	};



	pinctrl_i2c2: i2c2grp {

		fsl,pins = <MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL		0x40000004>,

			   <MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA		0x40000004>;

	};



	pinctrl_i2c2_gpio: i2c2gpiogrp {

		fsl,pins = <MX8MM_IOMUXC_I2C2_SCL_GPIO5_IO16		0x40000004>,

			   <MX8MM_IOMUXC_I2C2_SDA_GPIO5_IO17		0x40000004>;

	};



	pinctrl_i2c3: i2c3grp {

		fsl,pins = <MX8MM_IOMUXC_I2C3_SCL_I2C3_SCL		0x40000004>,

			   <MX8MM_IOMUXC_I2C3_SDA_I2C3_SDA		0x40000004>;

	};



	pinctrl_i2c3_gpio: i2c3gpiogrp {

		fsl,pins = <MX8MM_IOMUXC_I2C3_SCL_GPIO5_IO18		0x40000004>,

			   <MX8MM_IOMUXC_I2C3_SDA_GPIO5_IO19		0x40000004>;

	};



	pinctrl_pwm3: pwm3grp {

		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO14_PWM3_OUT		0x14>;

	};



	pinctrl_pwm4: pwm4grp {

		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO15_PWM4_OUT		0x14>;

	};



	pinctrl_sai3: sai3grp {

		fsl,pins = <MX8MM_IOMUXC_SAI3_MCLK_SAI3_MCLK		0x94>,

			   <MX8MM_IOMUXC_SAI3_RXC_SAI3_RX_BCLK		0x94>,

			   <MX8MM_IOMUXC_SAI3_RXFS_SAI3_RX_SYNC		0x94>,

			   <MX8MM_IOMUXC_SAI3_RXD_SAI3_RX_DATA0		0x94>,

			   <MX8MM_IOMUXC_SAI3_TXFS_SAI3_TX_SYNC		0x94>,

			   <MX8MM_IOMUXC_SAI3_TXD_SAI3_TX_DATA0		0x94>,

			   <MX8MM_IOMUXC_SAI3_TXC_SAI3_TX_BCLK		0x94>;

	};



	pinctrl_uart1: uart1grp {

		fsl,pins = <MX8MM_IOMUXC_UART1_RXD_UART1_DCE_RX		0x16>,

			   <MX8MM_IOMUXC_UART1_TXD_UART1_DCE_TX		0x16>;

	};



	pinctrl_uart2: uart2grp {

		fsl,pins = <MX8MM_IOMUXC_UART2_RXD_UART2_DCE_RX		0x16>,

			   <MX8MM_IOMUXC_UART2_TXD_UART2_DCE_TX		0x16>;

	};



	pinctrl_uart3: uart3grp {

		fsl,pins = <MX8MM_IOMUXC_UART3_RXD_UART3_DCE_RX		0x16>,

			   <MX8MM_IOMUXC_UART3_TXD_UART3_DCE_TX		0x16>;

	};



	pinctrl_uart4: uart4grp {

		fsl,pins = <MX8MM_IOMUXC_UART4_RXD_UART4_DCE_RX		0x16>,

			   <MX8MM_IOMUXC_UART4_TXD_UART4_DCE_TX		0x16>;

	};



	pinctrl_usbotg1: usbotg1grp {

		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO12_USB1_OTG_PWR	0x84>,

			   <MX8MM_IOMUXC_GPIO1_IO13_USB1_OTG_OC		0x84>;

	};



	pinctrl_usb1_extcon: usb1-extcongrp {

		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO10_GPIO1_IO10		0x1c0>;

	};



	pinctrl_usdhc2_gpio: usdhc2grpgpiogrp {

		fsl,pins = <MX8MM_IOMUXC_SD2_CD_B_GPIO2_IO12		0x84>;

	};



	pinctrl_usdhc2: usdhc2grp {

		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,

			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,

			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,

			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,

			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,

			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,

			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;

	};



	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {

		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,

			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,

			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,

			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,

			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,

			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,

			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;

	};



	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {

		fsl,pins = <MX8MM_IOMUXC_SD2_CLK_USDHC2_CLK		0x1d4>,

			   <MX8MM_IOMUXC_SD2_CMD_USDHC2_CMD		0x1d4>,

			   <MX8MM_IOMUXC_SD2_DATA0_USDHC2_DATA0		0x1d4>,

			   <MX8MM_IOMUXC_SD2_DATA1_USDHC2_DATA1		0x1d4>,

			   <MX8MM_IOMUXC_SD2_DATA2_USDHC2_DATA2		0x1d4>,

			   <MX8MM_IOMUXC_SD2_DATA3_USDHC2_DATA3		0x1d4>,

			   <MX8MM_IOMUXC_GPIO1_IO04_USDHC2_VSELECT	0x84>;

	};

};

arch/arm64/boot/dts/freescale/imx8mm-tqma8mqml.dtsi

0 → 100644
+335 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)

/*

 * Copyright 2020-2021 TQ-Systems GmbH

 */



#include "imx8mm.dtsi"



/ {

	model = "TQ-Systems GmbH i.MX8MM TQMa8MxML";

	compatible = "tq,imx8mm-tqma8mqml", "fsl,imx8mm";



	memory@40000000 {

		device_type = "memory";

		/*  our minimum RAM config will be 1024 MiB */

		reg = <0x00000000 0x40000000 0 0x40000000>;

	};



	/* e-MMC IO, needed for HS modes */

	reg_vcc1v8: regulator-vcc1v8 {

		compatible = "regulator-fixed";

		regulator-name = "TQMA8MXML_VCC1V8";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

	};



	/* identical to buck4_reg, but should never change */

	reg_vcc3v3: regulator-vcc3v3 {

		compatible = "regulator-fixed";

		regulator-name = "TQMA8MXML_VCC3V3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

	};



	reserved-memory {

		#address-cells = <2>;

		#size-cells = <2>;

		ranges;



		/* global autoconfigured region for contiguous allocations */

		linux,cma {

			compatible = "shared-dma-pool";

			reusable;

			/* 640 MiB */

			size = <0 0x28000000>;

			/*  1024 - 128 MiB, our minimum RAM config will be 1024 MiB */

			alloc-ranges = <0 0x40000000 0 0x78000000>;

			linux,cma-default;

		};

	};

};



&A53_0 {

	cpu-supply = <&buck2_reg>;

};



&flexspi {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_flexspi>;

	status = "okay";



	flash0: flash@0 {

		compatible = "jedec,spi-nor";

		reg = <0>;

		#address-cells = <1>;

		#size-cells = <1>;

		spi-max-frequency = <84000000>;

		spi-tx-bus-width = <1>;

		spi-rx-bus-width = <4>;

	};

};



&gpu_2d {

	status = "okay";

};



&gpu_3d {

	status = "okay";

};



&i2c1 {

	clock-frequency = <100000>;

	pinctrl-names = "default", "gpio";

	pinctrl-0 = <&pinctrl_i2c1>;

	pinctrl-1 = <&pinctrl_i2c1_gpio>;

	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

	status = "okay";



	sensor0: temperature-sensor-eeprom@1b {

		compatible = "nxp,se97", "jedec,jc-42.4-temp";

		reg = <0x1b>;

	};



	pca9450: pmic@25 {

		compatible = "nxp,pca9450a";

		reg = <0x25>;



		/* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */

		pinctrl-0 = <&pinctrl_pmic>;

		pinctrl-names = "default";

		interrupt-parent = <&gpio1>;

		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;



		regulators {

			/* V_0V85_SOC: 0.85 */

			buck1_reg: BUCK1 {

				regulator-name = "BUCK1";

				regulator-min-microvolt = <850000>;

				regulator-max-microvolt = <850000>;

				regulator-boot-on;

				regulator-always-on;

				regulator-ramp-delay = <3125>;

			};



			/* VDD_ARM */

			buck2_reg: BUCK2 {

				regulator-name = "BUCK2";

				regulator-min-microvolt = <850000>;

				regulator-max-microvolt = <1000000>;

				regulator-boot-on;

				regulator-always-on;

				nxp,dvs-run-voltage = <950000>;

				nxp,dvs-standby-voltage = <850000>;

				regulator-ramp-delay = <3125>;

			};



			/* V_0V85_GPU / DRAM / VPU */

			buck3_reg: BUCK3 {

				regulator-name = "BUCK3";

				regulator-min-microvolt = <850000>;

				regulator-max-microvolt = <950000>;

				regulator-boot-on;

				regulator-always-on;

				regulator-ramp-delay = <3125>;

			};



			/* VCC3V3 -> VMMC, ... must not be changed */

			buck4_reg: BUCK4 {

				regulator-name = "BUCK4";

				regulator-min-microvolt = <3300000>;

				regulator-max-microvolt = <3300000>;

				regulator-boot-on;

				regulator-always-on;

			};



			/* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */

			buck5_reg: BUCK5 {

				regulator-name = "BUCK5";

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-boot-on;

				regulator-always-on;

			};



			/* V_1V1 -> RAM, ... must not be changed */

			buck6_reg: BUCK6 {

				regulator-name = "BUCK6";

				regulator-min-microvolt = <1100000>;

				regulator-max-microvolt = <1100000>;

				regulator-boot-on;

				regulator-always-on;

			};



			/* V_1V8_SNVS */

			ldo1_reg: LDO1 {

				regulator-name = "LDO1";

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-boot-on;

				regulator-always-on;

			};



			/* V_0V8_SNVS */

			ldo2_reg: LDO2 {

				regulator-name = "LDO2";

				regulator-min-microvolt = <800000>;

				regulator-max-microvolt = <850000>;

				regulator-boot-on;

				regulator-always-on;

			};



			/* V_1V8_ANA */

			ldo3_reg: LDO3 {

				regulator-name = "LDO3";

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <1800000>;

				regulator-boot-on;

				regulator-always-on;

			};



			/* V_0V9_MIPI */

			ldo4_reg: LDO4 {

				regulator-name = "LDO4";

				regulator-min-microvolt = <900000>;

				regulator-max-microvolt = <900000>;

				regulator-boot-on;

				regulator-always-on;

			};



			/* VCC SD IO - switched using SD2 VSELECT */

			ldo5_reg: LDO5 {

				regulator-name = "LDO5";

				regulator-min-microvolt = <1800000>;

				regulator-max-microvolt = <3300000>;

			};

		};

	};





	pcf85063: rtc@51 {

		compatible = "nxp,pcf85063a";

		reg = <0x51>;

		quartz-load-femtofarads = <7000>;

	};



	eeprom1: eeprom@53 {

		compatible = "nxp,se97b", "atmel,24c02";

		read-only;

		reg = <0x53>;

		pagesize = <16>;

	};



	eeprom0: eeprom@57 {

		compatible = "atmel,24c64";

		reg = <0x57>;

		pagesize = <32>;

	};

};



&usdhc3 {

	pinctrl-names = "default", "state_100mhz", "state_200mhz";

	pinctrl-0 = <&pinctrl_usdhc3>;

	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;

	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;

	bus-width = <8>;

	non-removable;

	no-sd;

	no-sdio;

	vmmc-supply = <&reg_vcc3v3>;

	vqmmc-supply = <&reg_vcc1v8>;

	status = "okay";

};



/*

 * Attention:

 * wdog reset is routed to PMIC, PMIC must be preconfigured to force POR

 * without LDO for SNVS. GPIO1_IO02 must not be used as GPIO.

 */

&wdog1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_wdog>;

	fsl,ext-reset-output;

	status = "okay";

};



&iomuxc {

	pinctrl_flexspi: flexspigrp {

		fsl,pins = <MX8MM_IOMUXC_NAND_ALE_QSPI_A_SCLK		0x82>,

			   <MX8MM_IOMUXC_NAND_CE0_B_QSPI_A_SS0_B	0x82>,

			   <MX8MM_IOMUXC_NAND_DATA00_QSPI_A_DATA0	0x82>,

			   <MX8MM_IOMUXC_NAND_DATA01_QSPI_A_DATA1	0x82>,

			   <MX8MM_IOMUXC_NAND_DATA02_QSPI_A_DATA2	0x82>,

			   <MX8MM_IOMUXC_NAND_DATA03_QSPI_A_DATA3	0x82>;

	};



	pinctrl_i2c1: i2c1grp {

		fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_I2C1_SCL		0x40000004>,

			   <MX8MM_IOMUXC_I2C1_SDA_I2C1_SDA		0x40000004>;

	};



	pinctrl_i2c1_gpio: i2c1gpiogrp {

		fsl,pins = <MX8MM_IOMUXC_I2C1_SCL_GPIO5_IO14		0x40000004>,

			   <MX8MM_IOMUXC_I2C1_SDA_GPIO5_IO15		0x40000004>;

	};



	pinctrl_pmic: pmicgrp {

		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO08_GPIO1_IO8		0x94>;

	};



	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {

		fsl,pins = <MX8MM_IOMUXC_SD2_RESET_B_GPIO2_IO19		0x84>;

	};



	pinctrl_usdhc3: usdhc3grp {

		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d4>,

			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,

			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,

			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,

			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,

			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,

			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,

			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,

			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,

			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,

			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,

			   /* option USDHC3_RESET_B not defined, only in RM */

			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;

	};



	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {

		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d2>,

			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,

			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,

			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,

			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,

			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,

			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,

			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,

			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,

			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,

			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,

			   /* option USDHC3_RESET_B not defined, only in RM */

			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;

	};



	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {

		fsl,pins = <MX8MM_IOMUXC_NAND_WE_B_USDHC3_CLK		0x1d6>,

			   <MX8MM_IOMUXC_NAND_WP_B_USDHC3_CMD		0x1d2>,

			   <MX8MM_IOMUXC_NAND_DATA04_USDHC3_DATA0	0x1d4>,

			   <MX8MM_IOMUXC_NAND_DATA05_USDHC3_DATA1	0x1d4>,

			   <MX8MM_IOMUXC_NAND_DATA06_USDHC3_DATA2	0x1d4>,

			   <MX8MM_IOMUXC_NAND_DATA07_USDHC3_DATA3	0x1d4>,

			   <MX8MM_IOMUXC_NAND_RE_B_USDHC3_DATA4		0x1d4>,

			   <MX8MM_IOMUXC_NAND_CE2_B_USDHC3_DATA5	0x1d4>,

			   <MX8MM_IOMUXC_NAND_CE3_B_USDHC3_DATA6	0x1d4>,

			   <MX8MM_IOMUXC_NAND_CLE_USDHC3_DATA7		0x1d4>,

			   <MX8MM_IOMUXC_NAND_CE1_B_USDHC3_STROBE	0x84>,

			   /* option USDHC3_RESET_B not defined, only in RM */

			   <MX8MM_IOMUXC_NAND_READY_B_GPIO3_IO16	0x84>;

	};



	pinctrl_wdog: wdoggrp {

		fsl,pins = <MX8MM_IOMUXC_GPIO1_IO02_WDOG1_WDOG_B	0x84>;

	};

};

arch/arm64/boot/dts/freescale/mba8mx.dtsi

0 → 100644
+282 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)

/*

 * Copyright 2020-2021 TQ-Systems GmbH

 */



#include <dt-bindings/net/ti-dp83867.h>



/* TQ-Systems GmbH MBa8Mx baseboard */



/ {

	beeper {

		compatible = "pwm-beeper";

		pwms = <&pwm4 0 250000 0>;

		beeper-hz = <4000>;

		amp-supply = <&reg_vcc_3v3>;

	};



	chosen {

		// bootargs = "console=ttymxc2,115200 earlycon=ec_imx6q,0x30880000,115200";

		stdout-path = &uart3;

	};



	gpio-keys {

		compatible = "gpio-keys";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_gpiobutton>;

		autorepeat;



		switch1 {

			label = "switch1";

			linux,code = <BTN_0>;

			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;

			wakeup-source;

		};



		btn2: switch2 {

			label = "switch2";

			linux,code = <BTN_1>;

			gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;

			wakeup-source;

		};



		switch3 {

			label = "switch3";

			linux,code = <BTN_2>;

			gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;

			wakeup-source;

		};

	};



	gpio_leds: gpio-leds {

		compatible = "gpio-leds";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_gpioled>;



		led1 {

			label = "led1";

			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "default-on";

		};



		led2: led2 {

			label = "led2";

			gpios = <&gpio3 14 GPIO_ACTIVE_HIGH>;

			linux,default-trigger = "heartbeat";

		};

	};



	reg_hub_vbus: regulator-hub-vbus {

		compatible = "regulator-fixed";

		regulator-name = "MBA8MX_HUB_VBUS";

		regulator-min-microvolt = <5000000>;

		regulator-max-microvolt = <5000000>;

	};



	reg_sn65dsi83_1v8: regulator-sn65dsi83-1v8 {

		compatible = "regulator-fixed";

		regulator-name = "SN65DSI83_1V8";

		regulator-min-microvolt = <1800000>;

		regulator-max-microvolt = <1800000>;

		gpio = <&expander0 5 GPIO_ACTIVE_HIGH>;

		enable-active-high;

	};



	reg_vcc_3v3: regulator-3v3 {

		compatible = "regulator-fixed";

		regulator-name = "MBA8MX_3V3";

		regulator-min-microvolt = <3300000>;

		regulator-max-microvolt = <3300000>;

	};



	sound {

		compatible = "fsl,imx-audio-tlv320aic32x4";

		model = "tqm-tlv320aic32";

		ssi-controller = <&sai3>;

		audio-codec = <&tlv320aic3x04>;

	};

};



&ecspi1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_ecspi1>;

	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;

	status = "okay";

};



&ecspi2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_ecspi2>;

	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;

	status = "okay";

};



&fec1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_fec1>;

	phy-mode = "rgmii-id";

	phy-handle = <&ethphy0>;

	phy-supply = <&reg_vcc_3v3>;

	fsl,magic-packet;

	mac-address = [ 00 00 00 00 00 00 ];

	status = "okay";



	mdio {

		#address-cells = <1>;

		#size-cells = <0>;



		ethphy0: ethernet-phy@e {

			compatible = "ethernet-phy-ieee802.3-c22";

			reg = <0xe>;

			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;

			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_50_NS>;

			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;

			ti,dp83867-rxctrl-strap-quirk;

			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;

			enet-phy-lane-no-swap;

			reset-gpios = <&expander2 7 GPIO_ACTIVE_LOW>;

			reset-assert-us = <500000>;

			reset-deassert-us = <500>;

		};

	};

};



&i2c1 {

	expander0: gpio@23 {

		compatible = "nxp,pca9555";

		reg = <0x23>;

		gpio-controller;

		#gpio-cells = <2>;

		vcc-supply = <&reg_vcc_3v3>;

		interrupt-parent = <&gpio1>;

		interrupts = <9 IRQ_TYPE_EDGE_FALLING>;

		interrupt-controller;

		#interrupt-cells = <2>;



		sd-mux-oe-hog {

			gpio-hog;

			gpios = <8 0>;

			output-low;

			line-name = "SD_MUX_EN#";

		};



		boot-cfg-oe-hog {

			gpio-hog;

			gpios = <12 0>;

			output-high;

			line-name = "BOOT_CFG_OE#";

		};



		rst-usb-hub-hog {

			gpio-hog;

			gpios = <13 0>;

			output-high;

			line-name = "RST_USB_HUB#";

		};

	};



	expander1: gpio@24 {

		compatible = "nxp,pca9555";

		reg = <0x24>;

		gpio-controller;

		#gpio-cells = <2>;

		vcc-supply = <&reg_vcc_3v3>;

	};

};



&i2c2 {

	clock-frequency = <100000>;

	pinctrl-names = "default", "gpio";

	pinctrl-0 = <&pinctrl_i2c2>;

	pinctrl-1 = <&pinctrl_i2c2_gpio>;

	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

	status = "okay";



	tlv320aic3x04: audio-codec@18 {

		compatible = "ti,tlv320aic32x4";

		reg = <0x18>;

		reset-gpios = <&expander2 0 GPIO_ACTIVE_LOW>;

		iov-supply = <&reg_vcc_3v3>;

		ldoin-supply = <&reg_vcc_3v3>;

	};



	sensor1: sensor@1f {

		compatible = "nxp,se97", "jedec,jc-42.4-temp";

		reg = <0x1f>;

	};



	eeprom3: eeprom@57 {

		compatible = "nxp,se97b", "atmel,24c02";

		reg = <0x57>;

		pagesize = <16>;

	};

};



&i2c3 {

	clock-frequency = <100000>;

	pinctrl-names = "default", "gpio";

	pinctrl-0 = <&pinctrl_i2c3>;

	pinctrl-1 = <&pinctrl_i2c3_gpio>;

	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;

	status = "okay";

};



&pwm3 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_pwm3>;

	status = "okay";

};



&pwm4 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_pwm4>;

	status = "okay";

};



&sai3 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_sai3>;

	#sound-dai-cells = <0>;

	assigned-clock-rates = <49152000>;

	status = "okay";

};



&snvs_pwrkey {

	status = "okay";

};



&uart1 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart1>;

	status = "okay";

};



&uart2 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart2>;

	status = "okay";

};



/* console */

&uart3 {

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_uart3>;

	status = "okay";

};



/* UART4 is assigned to Cortex-M4 */

&usdhc2 {

	pinctrl-names = "default", "state_100mhz", "state_200mhz";

	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;

	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;

	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;

	bus-width = <4>;

	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;

	disable-wp;

	no-mmc;

	no-sdio;

	vmmc-supply = <&reg_usdhc2_vmmc>;

	status = "okay";

};