Commit a190a1ce authored by Ivan T. Ivanov's avatar Ivan T. Ivanov Committed by Kumar Gala
Browse files

arm64: dts: qcom: Add initial set of PMIC and SoC pins for APQ8016 SBC board 



Add initial device configuration nodes for APQ8016 and PM8916 GPIO's.

Signed-off-by: default avatarIvan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: default avatarKumar Gala <galak@codeaurora.org>
parent 366655c9

arch/arm64/boot/dts/qcom/apq8016-sbc-pmic-pins.dtsi

0 → 100644
+30 −0
Original line number Diff line number Diff line 
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>



&pm8916_gpios {



	pinctrl-names = "default";

	pinctrl-0 = <&pm8916_gpios_default>;



	pm8916_gpios_default: default {

		usb_hub_reset_pm {

			pins = "gpio1";

			function = PMIC_GPIO_FUNC_NORMAL;

			output-low;

		};

		usb_sw_sel_pm {

			pins = "gpio2";

			function = PMIC_GPIO_FUNC_NORMAL;

			input-disable;

		};

		usr_led_3_ctrl {

			pins = "gpio3";

			function = PMIC_GPIO_FUNC_NORMAL;

			output-low;

		};

		usr_led_4_ctrl {

			pins = "gpio4";

			function = PMIC_GPIO_FUNC_NORMAL;

			output-low;

		};

	};

};

arch/arm64/boot/dts/qcom/apq8016-sbc-soc-pins.dtsi

0 → 100644
+21 −0
Original line number Diff line number Diff line 


#include <dt-bindings/gpio/gpio.h>



&msmgpio {



	pinctrl-names = "default";

	pinctrl-0 = <&soc_gpios_default>;



	soc_gpios_default: default {

		usr_led_1_ctrl_default: usr_led_1_ctrl_default {

			pins = "gpio21";

			function = "gpio";

			output-low;

		};

		usr_led_2_ctrl_default: usr_led_2_ctrl_default {

			pins = "gpio120";

			function = "gpio";

			output-low;

		};

	};

};

arch/arm64/boot/dts/qcom/apq8016-sbc.dtsi

+2 −0
Original line number Diff line number Diff line
@@ -13,6 +13,8 @@ 


#include "msm8916.dtsi"

#include "pm8916.dtsi"

#include "apq8016-sbc-soc-pins.dtsi"

#include "apq8016-sbc-pmic-pins.dtsi"



/ {

	aliases {

arch/arm64/boot/dts/qcom/msm8916.dtsi

+1 −1
Original line number Diff line number Diff line
@@ -82,7 +82,7 @@ 
			reg = <0x4ab000 0x4>;

		};



		pinctrl@1000000 {

		msmgpio: pinctrl@1000000 {

			compatible = "qcom,msm8916-pinctrl";

			reg = <0x1000000 0x300000>;

			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;