Commit 74415995 authored by Jakub Vanek's avatar Jakub Vanek Committed by sanglipeng
Browse files

Revert "usb: dwc3: core: Enable AutoRetry feature in the controller"

stable inclusion
from stable-v5.10.190
commit 75ad45cef6992caa3ce374f53f5b5d07221f3d97
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I928UI

Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=75ad45cef6992caa3ce374f53f5b5d07221f3d97

--------------------------------

commit 734ae15a upstream.

This reverts commit b138e23d.

AutoRetry has been found to sometimes cause controller freezes when
communicating with buggy USB devices.

This controller feature allows the controller in host mode to send
non-terminating/burst retry ACKs instead of terminating retry ACKs
to devices when a transaction error (CRC error or overflow) occurs.

Unfortunately, if the USB device continues to respond with a CRC error,
the controller will not complete endpoint-related commands while it
keeps trying to auto-retry. [3] The xHCI driver will notice this once
it tries to abort the transfer using a Stop Endpoint command and
does not receive a completion in time. [1]
This situation is reported to dmesg:

[sda] tag#29 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
[sda] tag#29 CDB: opcode=0x28 28 00 00 69 42 80 00 00 48 00
xhci-hcd: xHCI host not responding to stop endpoint command
xhci-hcd: xHCI host controller not responding, assume dead
xhci-hcd: HC died; cleaning up

Some users observed this problem on an Odroid HC2 with the JMS578
USB3-to-SATA bridge. The issue can be triggered by starting
a read-heavy workload on an attached SSD. After a while, the host
controller would die and the SSD would disappear from the system. [1]

Further analysis by Synopsys determined that controller revisions
other than the one in Odroid HC2 are also affected by this.
The recommended solution was to disable AutoRetry altogether.
This change does not have a noticeable performance impact. [2]

Revert the enablement commit. This will keep the AutoRetry bit in
the default state configured during SoC design [2].

Fixes: b138e23d ("usb: dwc3: core: Enable AutoRetry feature in the controller")
Link: https://lore.kernel.org/r/a21f34c04632d250cd0a78c7c6f4a1c9c7a43142.camel@gmail.com/ [1]
Link: https://lore.kernel.org/r/20230711214834.kyr6ulync32d4ktk@synopsys.com/ [2]
Link: https://lore.kernel.org/r/20230712225518.2smu7wse6djc7l5o@synopsys.com/

 [3]
Cc: stable@vger.kernel.org
Cc: Mauro Ribeiro <mauro.ribeiro@hardkernel.com>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Suggested-by: default avatarThinh Nguyen <Thinh.Nguyen@synopsys.com>
Signed-off-by: default avatarJakub Vanek <linuxtardis@gmail.com>
Acked-by: default avatarThinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/20230714122419.27741-1-linuxtardis@gmail.com


Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: default avatarsanglipeng <sanglipeng1@jd.com>
parent 1ea34de2
Loading
Loading
Loading
Loading
0% Loading or .
You are about to add 0 people to the discussion. Proceed with caution.
Please to comment