scsi: hisi_sas: Add slave_destroy interface for v3 hw

driver inclusion
category: bugfix
bugzilla: https://gitee.com/openeuler/kernel/issues/I7BNF8


CVE: NA

----------------------------------------------------------------------

A WARNING is triggered when executing link reset of remote PHY
and rmmod SAS driver simultaneously. Following is the WARNING log:

WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0
 Call trace:
  __device_links_no_driver+0xb4/0xc0
  device_links_driver_cleanup+0xb0/0xfc
  __device_release_driver+0x198/0x23c
  device_release_driver+0x38/0x50
  bus_remove_device+0x130/0x140
  device_del+0x184/0x434
  __scsi_remove_device+0x118/0x150
  scsi_remove_target+0x1bc/0x240
  sas_rphy_remove+0x90/0x94
  sas_rphy_delete+0x24/0x3c
  sas_destruct_devices+0x64/0xa0 [libsas]
  sas_revalidate_domain+0xe4/0x150 [libsas]
  process_one_work+0x1e0/0x46c
  worker_thread+0x15c/0x464
  kthread+0x160/0x170
  ret_from_fork+0x10/0x20
 ---[ end trace 71e059eb58f85d4a ]---

During SAS phy up, link->status is set to DL_STATE_AVAILABLE in
device_links_driver_bound, then this setting influences
__device_links_no_driver() before driver rmmod and caused WARNING.

So we add the slave_destroy interface, to make sure link is removed
after flush workque.

Fixes: 16fd4a7c ("scsi: hisi_sas: Add device link between SCSI devices and hisi_hba")
Signed-off-by: Qi Liu <liuqi115@huawei.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Signed-off-by: xiabing <xiabing12@h-partners.com>