!318 net: hns3: This series bugfix for the HNS3 ethernet driver.

Merge Pull Request from: @svishen 
 
This series includes some bugfix for the HNS3 ethernet driver.
Patch 1# fix incorrect hw rss hash type of rx packet.
Fixes: 79664077 ("net: hns3: support RXD advanced layout")
Fixes: 232fc64b ("net: hns3: Add HW RSS hash information to RX skb")
Fixes: ea485867 ("net: hns3: handle the BD info on the last BD of the packet")

Patch 2# fix return value check bug of rx copybreak.
Fixes: e74a726d ("net: hns3: refactor hns3_nic_reuse_page()")
Fixes: 99f6b5fb ("net: hns3: use bounce buffer when rx page can not be reused")

Patch 3# net: hns3: fix setting incorrect phy link ksettings
for firmware in resetting process
Fixes: f5f2b3e4 ("net: hns3: add support for imp-controlled PHYs")
Fixes: c5ef83cb ("net: hns3: fix for phy_addr error in hclge_mac_mdio_config")
Fixes: 2312e050 ("net: hns3: Fix for deadlock problem occurring when unregistering ae_algo")


issue:
https://gitee.com/openeuler/kernel/issues/I65DT5


Test:
before
```
[root@localhost bin]# ethtool --reset enp53s0f0 all
ETHTOOL_RESET 0xffffffff
[150074.537297][T753377] hns3 0000:35:00.0 enp53s0f0: Setting reset type 6
[150074.539476][T753377] hns3 0000:35:00.0: received reset event, reset type is 6
Components reset:     0xffffffff[150074.542900][T753350] hns3 0000:35:00.0: global reset requested

[150074.546063][    C3] hns3 0000:35:00.0: global reset interrupt
[150074.548914][    C3] hns3 0000:35:00.1: global reset interrupt
[150074.552496][T753303] hns3 0000:35:00.1 enp53s0f1: link down
[root@localhost bin]# [150074.665230][T753303] hns3 0000:35:00.1: prepare wait ok
[150074.850640][T753350] hns3 0000:35:00.0: cleaned 0, need to clean 1
[150074.854640][T753350] hns3 0000:35:00.0: get link status cmd failed -52
[150074.857504][T753350] hns3 0000:35:00.0: failed to get phy link ksetting, ret = -16.
[150074.875240][T753350] hns3 0000:35:00.0 enp53s0f0: link down
[150074.985282][T753350] hns3 0000:35:00.0: prepare wait ok
[150075.093602][T753350] hns3 0000:35:00.0: In reset process RoCE client uninit.
[150075.101975][T753303] hns3 0000:35:00.1: In reset process RoCE client uninit.
[150075.436311][T753303] hns3 0000:35:00.1: Func clear success after reset.
[150075.438800][T753303] hns3 0000:35:00.1: Func clear success after reset.
[150075.441592][T753303] hns3 0000:35:00.1: Func clear success after reset.
[150075.443786][T753303] hns3 0000:35:00.1: Func clear success after reset.
[150075.446365][T753303] hns3 0000:35:00.1: Func clear success after reset.
[150075.447419][T753350] hns3 0000:35:00.0: Func clear success after reset.
[150075.451091][T753350] hns3 0000:35:00.0: Func clear success after reset.
[150075.453474][T753350] hns3 0000:35:00.0: Func clear success after reset.
[150075.455644][T753350] hns3 0000:35:00.0: Func clear success after reset.
[150075.458244][T753350] hns3 0000:35:00.0: Func clear success after reset.
[150076.100055][T753303] hns3 0000:35:00.1: The firmware version is 3.10.3.3
[150076.176640][T753303] hns3 0000:35:00.1: failed to set phy link ksettings, ret = -22.
[150076.180219][T753303] hns3 0000:35:00.1: failed to init tp port, ret = -22
[150076.184130][T753303] hns3 0000:35:00.1: re-schedule reset task(1)
[150076.331566][T753350] hns3 0000:35:00.0: The firmware version is 3.10.3.3
[150076.389714][T753350] hns3 0000:35:00.0: failed to set phy link ksettings, ret = -22.
[150076.392443][T753350] hns3 0000:35:00.0: failed to init tp port, ret = -22
[150076.395624][T753350] hns3 0000:35:00.0: re-schedule reset task(1)
[150076.505410][T753350] hns3 0000:35:00.0: prepare wait ok
[150076.505447][T753303] hns3 0000:35:00.1: prepare wait ok
[150076.505595][T753303] hns3 0000:35:00.1: In reset process RoCE client uninit.
[150076.507203][T753350] hns3 0000:35:00.0: In reset process RoCE client uninit.
[150076.613321][T753303] hns3 0000:35:00.1 enp53s0f1: already uninitialized
[150076.616410][T753303] hns3 0000:35:00.1: The firmware version is 3.10.3.3
[150076.672797][T753303] hns3 0000:35:00.1: failed to set phy link ksettings, ret = -22.
[150076.675727][T753303] hns3 0000:35:00.1: failed to init tp port, ret = -22
[150076.679115][T753303] hns3 0000:35:00.1: re-schedule reset task(2)
[150076.680281][T753350] hns3 0000:35:00.0 enp53s0f0: already uninitialized
[150076.685248][T753350] hns3 0000:35:00.0: The firmware version is 3.10.3.3
[150076.741248][T753350] hns3 0000:35:00.0: failed to set phy link ksettings, ret = -22.
[150076.743891][T753350] hns3 0000:35:00.0: failed to init tp port, ret = -22
[150076.746731][T753350] hns3 0000:35:00.0: re-schedule reset task(2)
[150076.853335][T753303] hns3 0000:35:00.1: prepare wait ok
[150076.855171][T753303] hns3 0000:35:00.1: In reset process RoCE client uninit.
[150076.857620][T753350] hns3 0000:35:00.0: prepare wait ok
[150076.857773][T753350] hns3 0000:35:00.0: In reset process RoCE client uninit.
[150076.965700][T753303] hns3 0000:35:00.1 enp53s0f1: already uninitialized
[150076.969398][T753303] hns3 0000:35:00.1: The firmware version is 3.10.3.3
[150077.028455][T753303] hns3 0000:35:00.1: failed to set phy link ksettings, ret = -22.
[150077.031628][T753303] hns3 0000:35:00.1: failed to init tp port, ret = -22
[150077.034743][T753303] hns3 0000:35:00.1: re-schedule reset task(3)
[150077.034959][T753350] hns3 0000:35:00.0 enp53s0f0: already uninitialized
[150077.040503][T753350] hns3 0000:35:00.0: The firmware version is 3.10.3.3
[150077.097388][T753350] hns3 0000:35:00.0: failed to set phy link ksettings, ret = -22.
[150077.099911][T753350] hns3 0000:35:00.0: failed to init tp port, ret = -22
[150077.102682][T753350] hns3 0000:35:00.0: re-schedule reset task(3)
[150077.209423][T753303] hns3 0000:35:00.1: prepare wait ok
[150077.211246][T753303] hns3 0000:35:00.1: In reset process RoCE client uninit.
[150077.213324][T753350] hns3 0000:35:00.0: prepare wait ok
[150077.213405][T753350] hns3 0000:35:00.0: In reset process RoCE client uninit.
[150077.321889][T753350] hns3 0000:35:00.0 enp53s0f0: already uninitialized
[150077.326240][T753350] hns3 0000:35:00.0: The firmware version is 3.10.3.3
[150077.380433][T753350] hns3 0000:35:00.0: failed to set phy link ksettings, ret = -22.
[150077.383371][T753350] hns3 0000:35:00.0: failed to init tp port, ret = -22
[150077.386465][T753350] hns3 0000:35:00.0: re-schedule reset task(4)
[150077.386647][T753303] hns3 0000:35:00.1 enp53s0f1: already uninitialized
[150077.391998][T753303] hns3 0000:35:00.1: The firmware version is 3.10.3.3
[150077.448488][T753303] hns3 0000:35:00.1: failed to set phy link ksettings, ret = -22.
[150077.451611][T753303] hns3 0000:35:00.1: failed to init tp port, ret = -22
[150077.454382][T753303] hns3 0000:35:00.1: re-schedule reset task(4)
[150077.561306][T753303] hns3 0000:35:00.1: prepare wait ok
[150077.561349][T753350] hns3 0000:35:00.0: prepare wait ok
[150077.561519][T753350] hns3 0000:35:00.0: In reset process RoCE client uninit.
[150077.563110][T753303] hns3 0000:35:00.1: In reset process RoCE client uninit.
[150077.670158][T753350] hns3 0000:35:00.0 enp53s0f0: already uninitialized
[150077.674054][T753350] hns3 0000:35:00.0: The firmware version is 3.10.3.3
[150077.728474][T753350] hns3 0000:35:00.0: failed to set phy link ksettings, ret = -22.
[150077.731156][T753350] hns3 0000:35:00.0: failed to init tp port, ret = -22
[150077.733575][T753350] hns3 0000:35:00.0: re-schedule reset task(5)
[150077.733778][T753303] hns3 0000:35:00.1 enp53s0f1: already uninitialized
[150077.738889][T753303] hns3 0000:35:00.1: The firmware version is 3.10.3.3
[150077.792638][T753303] hns3 0000:35:00.1: failed to set phy link ksettings, ret = -22.
[150077.795669][T753303] hns3 0000:35:00.1: failed to init tp port, ret = -22
[150077.798354][T753303] hns3 0000:35:00.1: re-schedule reset task(5)
[150077.905835][T753350] hns3 0000:35:00.0: prepare wait ok
[150077.907645][T753350] hns3 0000:35:00.0: In reset process RoCE client uninit.
[150077.909440][T753303] hns3 0000:35:00.1: prepare wait ok
[150077.911198][T753303] hns3 0000:35:00.1: In reset process RoCE client uninit.
[150078.018590][T753350] hns3 0000:35:00.0 enp53s0f0: already uninitialized
[150078.022734][T753350] hns3 0000:35:00.0: The firmware version is 3.10.3.3
[150078.076269][T753350] hns3 0000:35:00.0: failed to set phy link ksettings, ret = -22.
[150078.079143][T753350] hns3 0000:35:00.0: failed to init tp port, ret = -22
[150078.081812][T753350] hns3 0000:35:00.0: Reset fail!
[150078.081957][T753303] hns3 0000:35:00.1 enp53s0f1: already uninitialized
[150078.083730][T753350] hns3 0000:35:00.0: dump reset info:
[150078.083730][T753350] PF reset count: 0
[150078.083730][T753350] FLR reset count: 0
[150078.083730][T753350] GLOBAL reset count: 1
[150078.083730][T753350] IMP reset count: 0
[150078.083730][T753350] reset done count: 0
[150078.083730][T753350] HW reset done count: 6
[150078.083730][T753350] reset count: 6
[150078.083730][T753350] reset fail count: 5
[150078.083730][T753350] vector0 interrupt enable status: 0x1
[150078.083730][T753350] reset interrupt source: 0x0
[150078.083730][T753350] reset interrupt status: 0x0
[150078.083730][T753350] RAS interrupt status: 0x0
[150078.083730][T753350] hardware reset status: 0x0
[150078.083730][T753350] handshake status: 0x10080
[150078.083730][T753350] function reset status: 0x0
[150078.083730][T753350] hdev state: 0x802b2
[150078.086765][T753303] hns3 0000:35:00.1: The firmware version is 3.10.3.3
[150078.160671][T753303] hns3 0000:35:00.1: failed to set phy link ksettings, ret = -22.
[150078.163837][T753303] hns3 0000:35:00.1: failed to init tp port, ret = -22
[150078.166346][T753303] hns3 0000:35:00.1: Reset fail!
[150078.168266][T753303] hns3 0000:35:00.1: dump reset info:
[150078.168266][T753303] PF reset count: 0
[150078.168266][T753303] FLR reset count: 0
[150078.168266][T753303] GLOBAL reset count: 1
[150078.168266][T753303] IMP reset count: 0
[150078.168266][T753303] reset done count: 0
[150078.168266][T753303] HW reset done count: 6
[150078.168266][T753303] reset count: 6
[150078.168266][T753303] reset fail count: 5
[150078.168266][T753303] vector0 interrupt enable status: 0x1
[150078.168266][T753303] reset interrupt source: 0x0
[150078.168266][T753303] reset interrupt status: 0x0
[150078.168266][T753303] RAS interrupt status: 0x0
[150078.168266][T753303] hardware reset status: 0x0
[150078.168266][T753303] handshake status: 0x10080
[150078.168266][T753303] function reset status: 0x0
[150078.168266][T753303] hdev state: 0x802b2

[root@localhost bin]# ip a
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever
2: enp65s0f0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether e0:00:84:56:4e:38 brd ff:ff:ff:ff:ff:ff
    inet 192.168.60.11/24 scope global enp65s0f0
       valid_lft forever preferred_lft forever
4: enp65s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether e0:00:84:56:4e:39 brd ff:ff:ff:ff:ff:ff
372: enp53s0f0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether ce:04:7a:b4:9a:b1 brd ff:ff:ff:ff:ff:ff
373: enp53s0f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether 42:2f:aa:f3:50:e5 brd ff:ff:ff:ff:ff:ff
[root@localhost bin]#
```
after

```
[root@localhost pll]# ethtool --reset enp53s0f1 all
ETHTOOL_RESET 0xffffffff
[20652.651629][ T2931] hns3 0000:35:00.1 enp53s0f1: Setting reset type 6
Components reset:     0xffffffff
[root@localhost pll]# [20662.722669][    C1] hns3 0000:35:00.1: triggering reset in reset timer
[20662.725095][    C1] hns3 0000:35:00.1: received reset event, reset type is 6
[20662.728231][ T2880] hns3 0000:35:00.1: global reset requested
[20662.730430][    C1] hns3 0000:35:00.0: global reset interrupt
[20662.732888][    C1] hns3 0000:35:00.1: global reset interrupt
[20662.733803][ T2923] hns3 0000:35:00.0 enp53s0f0: link down
[20662.846863][ T2923] hns3 0000:35:00.0: prepare wait ok
[20663.028936][ T2880] hns3 0000:35:00.1: cleaned 0, need to clean 1
[20663.031251][ T2880] hns3 0000:35:00.1: get link status cmd failed -52
[20663.039432][ T2880] hns3 0000:35:00.1 enp53s0f1: link down
[20663.147103][ T2880] hns3 0000:35:00.1: prepare wait ok
[20663.312845][ T2880] hns3 0000:35:00.1: The firmware version is 3.10.3.3
[20664.260637][ T2880] hns3 0000:35:00.1: phc initializes ok!
[20664.404095][ T2880] hns3 0000:35:00.1: Reset done, hclge driver initialization finished.
[20664.536803][ T2923] hns3 0000:35:00.0: The firmware version is 3.10.3.3
[20665.484856][ T2923] hns3 0000:35:00.0: phc initializes ok!
[20665.628249][ T2923] hns3 0000:35:00.0: Reset done, hclge driver initialization finished.
[20665.875837][ T2923] hns3 0000:35:00.0 enp53s0f0: link up
[20665.881068][ T2880] hns3 0000:35:00.1 enp53s0f1: link up
```
 
 
Link:https://gitee.com/openeuler/kernel/pulls/318

 
Reviewed-by: Zheng Zengkai <zhengzengkai@huawei.com>
Reviewed-by: Yue Haibing <yuehaibing@huawei.com>
Signed-off-by: Zheng Zengkai <zhengzengkai@huawei.com>