diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 49c051380daf1973c1dbbf494b5ee58b11ff44a7..f54273e2ac979a386e27c0174e4a9524e60eae5e 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -270,8 +270,6 @@ preempt-locking.txt - info on locking under a preemptive kernel. printk-formats.txt - how to get printk format specifiers right -prio_tree.txt - - info on radix-priority-search-tree use for indexing vmas. ramoops.txt - documentation of the ramoops oops/panic logging module. rbtree.txt diff --git a/Documentation/ABI/obsolete/proc-pid-oom_adj b/Documentation/ABI/obsolete/proc-pid-oom_adj deleted file mode 100644 index 9a3cb88ade478742e7b60cb2787bd589e210589c..0000000000000000000000000000000000000000 --- a/Documentation/ABI/obsolete/proc-pid-oom_adj +++ /dev/null @@ -1,22 +0,0 @@ -What: /proc//oom_adj -When: August 2012 -Why: /proc//oom_adj allows userspace to influence the oom killer's - badness heuristic used to determine which task to kill when the kernel - is out of memory. - - The badness heuristic has since been rewritten since the introduction of - this tunable such that its meaning is deprecated. The value was - implemented as a bitshift on a score generated by the badness() - function that did not have any precise units of measure. With the - rewrite, the score is given as a proportion of available memory to the - task allocating pages, so using a bitshift which grows the score - exponentially is, thus, impossible to tune with fine granularity. - - A much more powerful interface, /proc//oom_score_adj, was - introduced with the oom killer rewrite that allows users to increase or - decrease the badness score linearly. This interface will replace - /proc//oom_adj. - - A warning will be emitted to the kernel log if an application uses this - deprecated interface. After it is printed once, future warnings will be - suppressed until the kernel is rebooted. diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index 6cd6daefaaedeb160a6f1ac1d616de7871b38965..986946613542b4bc1852aaf671e62059d3295cea 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -12,11 +12,14 @@ Description: then closing the file. The new policy takes effect after the file ima/policy is closed. + IMA appraisal, if configured, uses these file measurements + for local measurement appraisal. + rule format: action [condition ...] - action: measure | dont_measure + action: measure | dont_measure | appraise | dont_appraise | audit condition:= base | lsm - base: [[func=] [mask=] [fsmagic=] [uid=]] + base: [[func=] [mask=] [fsmagic=] [uid=] [fowner]] lsm: [[subj_user=] [subj_role=] [subj_type=] [obj_user=] [obj_role=] [obj_type=]] @@ -24,36 +27,50 @@ Description: mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC] fsmagic:= hex value uid:= decimal value + fowner:=decimal value lsm: are LSM specific default policy: # PROC_SUPER_MAGIC dont_measure fsmagic=0x9fa0 + dont_appraise fsmagic=0x9fa0 # SYSFS_MAGIC dont_measure fsmagic=0x62656572 + dont_appraise fsmagic=0x62656572 # DEBUGFS_MAGIC dont_measure fsmagic=0x64626720 + dont_appraise fsmagic=0x64626720 # TMPFS_MAGIC dont_measure fsmagic=0x01021994 + dont_appraise fsmagic=0x01021994 + # RAMFS_MAGIC + dont_measure fsmagic=0x858458f6 + dont_appraise fsmagic=0x858458f6 # SECURITYFS_MAGIC dont_measure fsmagic=0x73636673 + dont_appraise fsmagic=0x73636673 measure func=BPRM_CHECK measure func=FILE_MMAP mask=MAY_EXEC measure func=FILE_CHECK mask=MAY_READ uid=0 + appraise fowner=0 The default policy measures all executables in bprm_check, all files mmapped executable in file_mmap, and all files - open for read by root in do_filp_open. + open for read by root in do_filp_open. The default appraisal + policy appraises all files owned by root. Examples of LSM specific definitions: SELinux: # SELINUX_MAGIC - dont_measure fsmagic=0xF97CFF8C + dont_measure fsmagic=0xf97cff8c + dont_appraise fsmagic=0xf97cff8c dont_measure obj_type=var_log_t + dont_appraise obj_type=var_log_t dont_measure obj_type=auditd_log_t + dont_appraise obj_type=auditd_log_t measure subj_user=system_u func=FILE_CHECK mask=MAY_READ measure subj_role=system_r func=FILE_CHECK mask=MAY_READ diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index 34f51100f0299cb5a96a77984def99dbfdd9367d..dff1f48d252d8f0d36aa31cccf6514cb02b3d333 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -210,3 +210,15 @@ Users: firmware assigned instance number of the PCI device that can help in understanding the firmware intended order of the PCI device. + +What: /sys/bus/pci/devices/.../d3cold_allowed +Date: July 2012 +Contact: Huang Ying +Description: + d3cold_allowed is bit to control whether the corresponding PCI + device can be put into D3Cold state. If it is cleared, the + device will never be put into D3Cold state. If it is set, the + device may be put into D3Cold state if other requirements are + satisfied too. Reading this attribute will show the current + value of d3cold_allowed bit. Writing this attribute will set + the value of d3cold_allowed bit. diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd index 3c17b62899f688c5955a3f065e966c9fc72231f7..1cf2adf46b118cd4b2f7bc2449a1065d764a2bd6 100644 --- a/Documentation/ABI/testing/sysfs-bus-rbd +++ b/Documentation/ABI/testing/sysfs-bus-rbd @@ -25,6 +25,10 @@ client_id The ceph unique client id that was assigned for this specific session. +features + + A hexadecimal encoding of the feature bits for this image. + major The block device major number. @@ -33,6 +37,11 @@ name The name of the rbd image. +image_id + + The unique id for the rbd image. (For rbd image format 1 + this is empty.) + pool The name of the storage pool where this rbd image resides. @@ -57,12 +66,6 @@ current_snap The current snapshot for which the device is mapped. -create_snap - - Create a snapshot: - - $ echo > /sys/bus/rbd/devices//snap_create - snap_* A directory per each snapshot @@ -79,4 +82,7 @@ snap_size The size of the image when this snapshot was taken. +snap_features + + A hexadecimal encoding of the feature bits for this snapshot. diff --git a/Documentation/ABI/testing/sysfs-bus-usb b/Documentation/ABI/testing/sysfs-bus-usb index 5f75f8f7df341380d8bef013ad445ae509083916..b6fbe514a869a311bea16c1918061128c8f9d6dc 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb +++ b/Documentation/ABI/testing/sysfs-bus-usb @@ -220,3 +220,10 @@ Description: If the device doesn't support LTM, the file will read "no". The file will be present for all speeds of USB devices, and will always read "no" for USB 1.1 and USB 2.0 devices. + +What: /sys/bus/usb/devices/.../(hub interface)/portX +Date: August 2012 +Contact: Lan Tianyu +Description: + The /sys/bus/usb/devices/.../(hub interface)/portX + is usb port device's sysfs directory. diff --git a/Documentation/ABI/testing/sysfs-class-extcon b/Documentation/ABI/testing/sysfs-class-extcon index 20ab361bd8c64ea2c3c313e778edc64d26352cc5..57a726232912e46ae61adfc545ace17d25023558 100644 --- a/Documentation/ABI/testing/sysfs-class-extcon +++ b/Documentation/ABI/testing/sysfs-class-extcon @@ -13,7 +13,7 @@ Description: accessory cables have such capability. For example, the 30-pin port of Nuri board (/arch/arm/mach-exynos) may have both HDMI and Charger attached, or analog audio, - video, and USB cables attached simulteneously. + video, and USB cables attached simultaneously. If there are cables mutually exclusive with each other, such binary relations may be expressed with extcon_dev's @@ -35,7 +35,7 @@ Description: The /sys/class/extcon/.../state shows and stores the cable attach/detach information of the corresponding extcon object. If the extcon object has an optional callback "show_state" - defined, the showing function is overriden with the optional + defined, the showing function is overridden with the optional callback. If the default callback for showing function is used, the @@ -46,19 +46,19 @@ Description: TA=1 EAR_JACK=0 # - In this example, the extcon device have USB_OTG and TA + In this example, the extcon device has USB_OTG and TA cables attached and HDMI and EAR_JACK cables detached. In order to update the state of an extcon device, enter a hex - state number starting with 0x. - echo 0xHEX > state + state number starting with 0x: + # echo 0xHEX > state - This updates the whole state of the extcon dev. + This updates the whole state of the extcon device. Inputs of all the methods are required to meet the - mutually_exclusive contidions if they exist. + mutually_exclusive conditions if they exist. It is recommended to use this "global" state interface if - you need to enter the value atomically. The later state + you need to set the value atomically. The later state interface associated with each cable cannot update multiple cable states of an extcon device simultaneously. @@ -73,7 +73,7 @@ What: /sys/class/extcon/.../cable.x/state Date: February 2012 Contact: MyungJoo Ham Description: - The /sys/class/extcon/.../cable.x/name shows and stores the + The /sys/class/extcon/.../cable.x/state shows and stores the state of cable "x" (integer between 0 and 31) of an extcon device. The state value is either 0 (detached) or 1 (attached). @@ -83,8 +83,8 @@ Date: December 2011 Contact: MyungJoo Ham Description: Shows the relations of mutually exclusiveness. For example, - if the mutually_exclusive array of extcon_dev is - {0x3, 0x5, 0xC, 0x0}, the, the output is: + if the mutually_exclusive array of extcon device is + {0x3, 0x5, 0xC, 0x0}, then the output is: # ls mutually_exclusive/ 0x3 0x5 diff --git a/Documentation/ABI/testing/sysfs-class-regulator b/Documentation/ABI/testing/sysfs-class-regulator index e091fa8737929966b0939e1a96e4e9fe05d89c39..bc578bc606284bf248fe87169e8cda0dbdfa4f3a 100644 --- a/Documentation/ABI/testing/sysfs-class-regulator +++ b/Documentation/ABI/testing/sysfs-class-regulator @@ -349,3 +349,24 @@ Description: This will be one of the same strings reported by the "state" attribute. + +What: /sys/class/regulator/.../bypass +Date: September 2012 +KernelVersion: 3.7 +Contact: Mark Brown +Description: + Some regulator directories will contain a field called + bypass. This indicates if the device is in bypass mode. + + This will be one of the following strings: + + 'enabled' + 'disabled' + 'unknown' + + 'enabled' means the regulator is in bypass mode. + + 'disabled' means that the regulator is regulating. + + 'unknown' means software cannot determine the state, or + the reported state is invalid. diff --git a/Documentation/ABI/testing/sysfs-devices-firmware_node b/Documentation/ABI/testing/sysfs-devices-firmware_node new file mode 100644 index 0000000000000000000000000000000000000000..46badc9ea284b80ad5584f932cea8028a132ef9b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-firmware_node @@ -0,0 +1,17 @@ +What: /sys/devices/.../firmware_node/ +Date: September 2012 +Contact: <> +Description: + The /sys/devices/.../firmware_node directory contains attributes + allowing the user space to check and modify some firmware + related properties of given device. + +What: /sys/devices/.../firmware_node/description +Date: September 2012 +Contact: Lance Ortiz +Description: + The /sys/devices/.../firmware/description attribute contains a string + that describes the device as provided by the _STR method in the ACPI + namespace. This attribute is read-only. If the device does not have + an _STR method associated with it in the ACPI namespace, this + attribute is not present. diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 5dab36448b44b84bf869b9316d50af47f00328b6..6943133afcb8388916a87e2bd66923fe26a97906 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -176,3 +176,14 @@ Description: Disable L3 cache indices All AMD processors with L3 caches provide this functionality. For details, see BKDGs at http://developer.amd.com/documentation/guides/Pages/default.aspx + + +What: /sys/devices/system/cpu/cpufreq/boost +Date: August 2012 +Contact: Linux kernel mailing list +Description: Processor frequency boosting control + + This switch controls the boost setting for the whole system. + Boosting allows the CPU and the firmware to run at a frequency + beyound it's nominal limit. + More details can be found in Documentation/cpu-freq/boost.txt diff --git a/Documentation/ABI/testing/sysfs-driver-ppi b/Documentation/ABI/testing/sysfs-driver-ppi new file mode 100644 index 0000000000000000000000000000000000000000..97a003ee058bc79e444bf8e442fa87d93b8f8af3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-ppi @@ -0,0 +1,70 @@ +What: /sys/devices/pnp0//ppi/ +Date: August 2012 +Kernel Version: 3.6 +Contact: xiaoyan.zhang@intel.com +Description: + This folder includes the attributes related with PPI (Physical + Presence Interface). Only if TPM is supported by BIOS, this + folder makes sence. The folder path can be got by command + 'find /sys/ -name 'pcrs''. For the detail information of PPI, + please refer to the PPI specification from + http://www.trustedcomputinggroup.org/ + +What: /sys/devices/pnp0//ppi/version +Date: August 2012 +Contact: xiaoyan.zhang@intel.com +Description: + This attribute shows the version of the PPI supported by the + platform. + This file is readonly. + +What: /sys/devices/pnp0//ppi/request +Date: August 2012 +Contact: xiaoyan.zhang@intel.com +Description: + This attribute shows the request for an operation to be + executed in the pre-OS environment. It is the only input from + the OS to the pre-OS environment. The request should be an + integer value range from 1 to 160, and 0 means no request. + This file can be read and written. + +What: /sys/devices/pnp0/00:/ppi/response +Date: August 2012 +Contact: xiaoyan.zhang@intel.com +Description: + This attribute shows the response to the most recent operation + request it acted upon. The format is " + : ". + This file is readonly. + +What: /sys/devices/pnp0//ppi/transition_action +Date: August 2012 +Contact: xiaoyan.zhang@intel.com +Description: + This attribute shows the platform-specific action that should + take place in order to transition to the BIOS for execution of + a requested operation. The format is ": ". + This file is readonly. + +What: /sys/devices/pnp0//ppi/tcg_operations +Date: August 2012 +Contact: xiaoyan.zhang@intel.com +Description: + This attribute shows whether it is allowed to request an + operation to be executed in the pre-OS environment by the BIOS + for the requests defined by TCG, i.e. requests from 1 to 22. + The format is " : ". + This attribute is only supported by PPI version 1.2+. + This file is readonly. + +What: /sys/devices/pnp0//ppi/vs_operations +Date: August 2012 +Contact: xiaoyan.zhang@intel.com +Description: + This attribute shows whether it is allowed to request an + operation to be executed in the pre-OS environment by the BIOS + for the verdor specific requests, i.e. requests from 128 to + 255. The format is same with tcg_operations. This attribute + is also only supported by PPI version 1.2+. + This file is readonly. diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom index 8d55a83d6921d1b8779ba72430587be42856826c..7fc781048b799a2f32bed2775d2f1fc97e8534ec 100644 --- a/Documentation/ABI/testing/sysfs-driver-wacom +++ b/Documentation/ABI/testing/sysfs-driver-wacom @@ -1,3 +1,16 @@ +WWhat: /sys/class/hidraw/hidraw*/device/oled*_img +Date: June 2012 +Contact: linux-bluetooth@vger.kernel.org +Description: + The /sys/class/hidraw/hidraw*/device/oled*_img files control + OLED mocro displays on Intuos4 Wireless tablet. Accepted image + has to contain 256 bytes (64x32 px 1 bit colour). The format + is the same as PBM image 62x32px without header (64 bits per + horizontal line, 32 lines). An example of setting OLED No. 0: + dd bs=256 count=1 if=img_file of=[path to oled0_img]/oled0_img + The attribute is read only and no local copy of the image is + stored. + What: /sys/class/hidraw/hidraw*/device/speed Date: April 2010 Kernel Version: 2.6.35 diff --git a/Documentation/ABI/testing/sysfs-fs-ext4 b/Documentation/ABI/testing/sysfs-fs-ext4 index f22ac0872ae8de41a44406edfab71384d54b830a..c631253cf85c763de6cfd347a15ce063fd71be07 100644 --- a/Documentation/ABI/testing/sysfs-fs-ext4 +++ b/Documentation/ABI/testing/sysfs-fs-ext4 @@ -96,3 +96,16 @@ Contact: "Theodore Ts'o" Description: The maximum number of megabytes the writeback code will try to write out before move on to another inode. + +What: /sys/fs/ext4//extent_max_zeroout_kb +Date: August 2012 +Contact: "Theodore Ts'o" +Description: + The maximum number of kilobytes which will be zeroed + out in preference to creating a new uninitialized + extent when manipulating an inode's extent tree. Note + that using a larger value will increase the + variability of time necessary to complete a random + write operation (since a 4k random write might turn + into a much larger write due to the zeroout + operation). diff --git a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop index 814b01354c414caf71337d115b41fc92c89769b8..b31e782bd9850628f77f683ba0f87a5ab6d169ae 100644 --- a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop +++ b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop @@ -5,4 +5,15 @@ Contact: "Ike Panhc " Description: Control the power of camera module. 1 means on, 0 means off. +What: /sys/devices/platform/ideapad/fan_mode +Date: June 2012 +KernelVersion: 3.6 +Contact: "Maxim Mikityanskiy " +Description: + Change fan mode + There are four available modes: + * 0 -> Super Silent Mode + * 1 -> Standard Mode + * 2 -> Dust Cleaning + * 4 -> Efficient Thermal Dissipation Mode diff --git a/Documentation/ABI/testing/sysfs-ptp b/Documentation/ABI/testing/sysfs-ptp index d40d2b55050239cd2669095ab909f287208f8f24..05aeedf177946a9f9eb99a9f6b4b26a488f2f74a 100644 --- a/Documentation/ABI/testing/sysfs-ptp +++ b/Documentation/ABI/testing/sysfs-ptp @@ -19,7 +19,11 @@ Date: September 2010 Contact: Richard Cochran Description: This file contains the name of the PTP hardware clock - as a human readable string. + as a human readable string. The purpose of this + attribute is to provide the user with a "friendly + name" and to help distinguish PHY based devices from + MAC based ones. The string does not necessarily have + to be any kind of unique id. What: /sys/class/ptp/ptpN/max_adjustment Date: September 2010 diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty index b138b663bf54cf545dabb88e4a158874c5d8a785..0c430150d92976260c5b40a4b4c9fedd1600fa9d 100644 --- a/Documentation/ABI/testing/sysfs-tty +++ b/Documentation/ABI/testing/sysfs-tty @@ -17,3 +17,12 @@ Description: device, like 'tty1'. The file supports poll() to detect virtual console switches. + +What: /sys/class/tty/ttyS0/uartclk +Date: Sep 2012 +Contact: Tomas Hlavacek +Description: + Shows the current uartclk value associated with the + UART port in serial_core, that is bound to TTY like ttyS0. + uartclk = 16 * baud_base + diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index cb9258b8fd35b25b8ac750b18b4237204213fbd4..495e5ba1634cac59350326485b07b7e902242ab3 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -454,6 +454,16 @@ The preferred style for long (multi-line) comments is: * with beginning and ending almost-blank lines. */ +For files in net/ and drivers/net/ the preferred style for long (multi-line) +comments is a little different. + + /* The preferred comment style for files in net/ and drivers/net + * looks like this. + * + * It is nearly the same as the generally preferred comment style, + * but there is no initial almost-blank line. + */ + It's also important to comment data, whether they are basic types or derived types. To this end, use just one data declaration per line (no commas for multiple data declarations). This leaves you room for a small comment on each diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 196b8b9dba1112b245e331a76b62e804604b191a..b0300529ab13ede1178cf51097a02da67cfcc315 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -6,11 +6,36 @@ Linux DRM Developer's Guide + + + Jesse + Barnes + Initial version + + Intel Corporation +
+ jesse.barnes@intel.com +
+ + + + Laurent + Pinchart + Driver internals + + Ideas on board SPRL +
+ laurent.pinchart@ideasonboard.com +
+ + + + 2008-2009 - - Intel Corporation (Jesse Barnes <jesse.barnes@intel.com>) - + 2012 + Intel Corporation + Laurent Pinchart @@ -20,6 +45,17 @@ the kernel source COPYING file. + + + + + 1.0 + 2012-07-13 + LP + Added extensive documentation about driver internals. + + + @@ -72,342 +108,361 @@ submission & fencing, suspend/resume support, and DMA services. - - The core of every DRM driver is struct drm_driver. Drivers - typically statically initialize a drm_driver structure, - then pass it to drm_init() at load time. - - Driver initialization - - Before calling the DRM initialization routines, the driver must - first create and fill out a struct drm_driver structure. - - - static struct drm_driver driver = { - /* Don't use MTRRs here; the Xserver or userspace app should - * deal with them for Intel hardware. - */ - .driver_features = - DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | - DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_MODESET, - .load = i915_driver_load, - .unload = i915_driver_unload, - .firstopen = i915_driver_firstopen, - .lastclose = i915_driver_lastclose, - .preclose = i915_driver_preclose, - .save = i915_save, - .restore = i915_restore, - .device_is_agp = i915_driver_device_is_agp, - .get_vblank_counter = i915_get_vblank_counter, - .enable_vblank = i915_enable_vblank, - .disable_vblank = i915_disable_vblank, - .irq_preinstall = i915_driver_irq_preinstall, - .irq_postinstall = i915_driver_irq_postinstall, - .irq_uninstall = i915_driver_irq_uninstall, - .irq_handler = i915_driver_irq_handler, - .reclaim_buffers = drm_core_reclaim_buffers, - .get_map_ofs = drm_core_get_map_ofs, - .get_reg_ofs = drm_core_get_reg_ofs, - .fb_probe = intelfb_probe, - .fb_remove = intelfb_remove, - .fb_resize = intelfb_resize, - .master_create = i915_master_create, - .master_destroy = i915_master_destroy, -#if defined(CONFIG_DEBUG_FS) - .debugfs_init = i915_debugfs_init, - .debugfs_cleanup = i915_debugfs_cleanup, -#endif - .gem_init_object = i915_gem_init_object, - .gem_free_object = i915_gem_free_object, - .gem_vm_ops = &i915_gem_vm_ops, - .ioctls = i915_ioctls, - .fops = { - .owner = THIS_MODULE, - .open = drm_open, - .release = drm_release, - .ioctl = drm_ioctl, - .mmap = drm_mmap, - .poll = drm_poll, - .fasync = drm_fasync, -#ifdef CONFIG_COMPAT - .compat_ioctl = i915_compat_ioctl, -#endif - .llseek = noop_llseek, - }, - .pci_driver = { - .name = DRIVER_NAME, - .id_table = pciidlist, - .probe = probe, - .remove = __devexit_p(drm_cleanup_pci), - }, - .name = DRIVER_NAME, - .desc = DRIVER_DESC, - .date = DRIVER_DATE, - .major = DRIVER_MAJOR, - .minor = DRIVER_MINOR, - .patchlevel = DRIVER_PATCHLEVEL, - }; - - - In the example above, taken from the i915 DRM driver, the driver - sets several flags indicating what core features it supports; - we go over the individual callbacks in later sections. Since - flags indicate which features your driver supports to the DRM - core, you need to set most of them prior to calling drm_init(). Some, - like DRIVER_MODESET can be set later based on user supplied parameters, - but that's the exception rather than the rule. - - - Driver flags - - DRIVER_USE_AGP - - Driver uses AGP interface - - - - DRIVER_REQUIRE_AGP - - Driver needs AGP interface to function. - - - - DRIVER_USE_MTRR - - - Driver uses MTRR interface for mapping memory. Deprecated. - - - - - DRIVER_PCI_DMA - - Driver is capable of PCI DMA. Deprecated. - - - - DRIVER_SG - - Driver can perform scatter/gather DMA. Deprecated. - - - - DRIVER_HAVE_DMA - Driver supports DMA. Deprecated. - - - DRIVER_HAVE_IRQDRIVER_IRQ_SHARED - - - DRIVER_HAVE_IRQ indicates whether the driver has an IRQ - handler. DRIVER_IRQ_SHARED indicates whether the device & - handler support shared IRQs (note that this is required of - PCI drivers). - - - - - DRIVER_DMA_QUEUE - - - Should be set if the driver queues DMA requests and completes them - asynchronously. Deprecated. - - - - - DRIVER_FB_DMA - - - Driver supports DMA to/from the framebuffer. Deprecated. - - - - - DRIVER_MODESET - - - Driver supports mode setting interfaces. - - - - - - In this specific case, the driver requires AGP and supports - IRQs. DMA, as discussed later, is handled by device-specific ioctls - in this case. It also supports the kernel mode setting APIs, though - unlike in the actual i915 driver source, this example unconditionally - exports KMS capability. + Driver Initialization + + At the core of every DRM driver is a drm_driver + structure. Drivers typically statically initialize a drm_driver structure, + and then pass it to one of the drm_*_init() functions + to register it with the DRM subsystem. - - - - - - Driver load - - In the previous section, we saw what a typical drm_driver - structure might look like. One of the more important fields in - the structure is the hook for the load function. - - - static struct drm_driver driver = { - ... - .load = i915_driver_load, - ... - }; - - - The load function has many responsibilities: allocating a driver - private structure, specifying supported performance counters, - configuring the device (e.g. mapping registers & command - buffers), initializing the memory manager, and setting up the - initial output configuration. - - - If compatibility is a concern (e.g. with drivers converted over - to the new interfaces from the old ones), care must be taken to - prevent device initialization and control that is incompatible with - currently active userspace drivers. For instance, if user - level mode setting drivers are in use, it would be problematic - to perform output discovery & configuration at load time. - Likewise, if user-level drivers unaware of memory management are - in use, memory management and command buffer setup may need to - be omitted. These requirements are driver-specific, and care - needs to be taken to keep both old and new applications and - libraries working. The i915 driver supports the "modeset" - module parameter to control whether advanced features are - enabled at load time or in legacy fashion. + + The drm_driver structure contains static + information that describes the driver and features it supports, and + pointers to methods that the DRM core will call to implement the DRM API. + We will first go through the drm_driver static + information fields, and will then describe individual operations in + details as they get used in later sections. - - Driver private & performance counters - - The driver private hangs off the main drm_device structure and - can be used for tracking various device-specific bits of - information, like register offsets, command buffer status, - register state for suspend/resume, etc. At load time, a - driver may simply allocate one and set drm_device.dev_priv - appropriately; it should be freed and drm_device.dev_priv set - to NULL when the driver is unloaded. - + Driver Information + + Driver Features + + Drivers inform the DRM core about their requirements and supported + features by setting appropriate flags in the + driver_features field. Since those flags + influence the DRM core behaviour since registration time, most of them + must be set to registering the drm_driver + instance. + + u32 driver_features; + + Driver Feature Flags + + DRIVER_USE_AGP + + Driver uses AGP interface, the DRM core will manage AGP resources. + + + + DRIVER_REQUIRE_AGP + + Driver needs AGP interface to function. AGP initialization failure + will become a fatal error. + + + + DRIVER_USE_MTRR + + Driver uses MTRR interface for mapping memory, the DRM core will + manage MTRR resources. Deprecated. + + + + DRIVER_PCI_DMA + + Driver is capable of PCI DMA, mapping of PCI DMA buffers to + userspace will be enabled. Deprecated. + + + + DRIVER_SG + + Driver can perform scatter/gather DMA, allocation and mapping of + scatter/gather buffers will be enabled. Deprecated. + + + + DRIVER_HAVE_DMA + + Driver supports DMA, the userspace DMA API will be supported. + Deprecated. + + + + DRIVER_HAVE_IRQDRIVER_IRQ_SHARED + + DRIVER_HAVE_IRQ indicates whether the driver has an IRQ handler. The + DRM core will automatically register an interrupt handler when the + flag is set. DRIVER_IRQ_SHARED indicates whether the device & + handler support shared IRQs (note that this is required of PCI + drivers). + + + + DRIVER_IRQ_VBL + Unused. Deprecated. + + + DRIVER_DMA_QUEUE + + Should be set if the driver queues DMA requests and completes them + asynchronously. Deprecated. + + + + DRIVER_FB_DMA + + Driver supports DMA to/from the framebuffer, mapping of frambuffer + DMA buffers to userspace will be supported. Deprecated. + + + + DRIVER_IRQ_VBL2 + Unused. Deprecated. + + + DRIVER_GEM + + Driver use the GEM memory manager. + + + + DRIVER_MODESET + + Driver supports mode setting interfaces (KMS). + + + + DRIVER_PRIME + + Driver implements DRM PRIME buffer sharing. + + + + + + Major, Minor and Patchlevel + int major; +int minor; +int patchlevel; + + The DRM core identifies driver versions by a major, minor and patch + level triplet. The information is printed to the kernel log at + initialization time and passed to userspace through the + DRM_IOCTL_VERSION ioctl. + + + The major and minor numbers are also used to verify the requested driver + API version passed to DRM_IOCTL_SET_VERSION. When the driver API changes + between minor versions, applications can call DRM_IOCTL_SET_VERSION to + select a specific version of the API. If the requested major isn't equal + to the driver major, or the requested minor is larger than the driver + minor, the DRM_IOCTL_SET_VERSION call will return an error. Otherwise + the driver's set_version() method will be called with the requested + version. + + + + Name, Description and Date + char *name; +char *desc; +char *date; + + The driver name is printed to the kernel log at initialization time, + used for IRQ registration and passed to userspace through + DRM_IOCTL_VERSION. + + + The driver description is a purely informative string passed to + userspace through the DRM_IOCTL_VERSION ioctl and otherwise unused by + the kernel. + + + The driver date, formatted as YYYYMMDD, is meant to identify the date of + the latest modification to the driver. However, as most drivers fail to + update it, its value is mostly useless. The DRM core prints it to the + kernel log at initialization time and passes it to userspace through the + DRM_IOCTL_VERSION ioctl. + + + + + Driver Load - The DRM supports several counters which may be used for rough - performance characterization. Note that the DRM stat counter - system is not often used by applications, and supporting - additional counters is completely optional. + The load method is the driver and device + initialization entry point. The method is responsible for allocating and + initializing driver private data, specifying supported performance + counters, performing resource allocation and mapping (e.g. acquiring + clocks, mapping registers or allocating command buffers), initializing + the memory manager (), installing + the IRQ handler (), setting up + vertical blanking handling (), mode + setting () and initial output + configuration (). + + If compatibility is a concern (e.g. with drivers converted over from + User Mode Setting to Kernel Mode Setting), care must be taken to prevent + device initialization and control that is incompatible with currently + active userspace drivers. For instance, if user level mode setting + drivers are in use, it would be problematic to perform output discovery + & configuration at load time. Likewise, if user-level drivers + unaware of memory management are in use, memory management and command + buffer setup may need to be omitted. These requirements are + driver-specific, and care needs to be taken to keep both old and new + applications and libraries working. + + int (*load) (struct drm_device *, unsigned long flags); - These interfaces are deprecated and should not be used. If performance - monitoring is desired, the developer should investigate and - potentially enhance the kernel perf and tracing infrastructure to export - GPU related performance information for consumption by performance - monitoring tools and applications. + The method takes two arguments, a pointer to the newly created + drm_device and flags. The flags are used to + pass the driver_data field of the device id + corresponding to the device passed to drm_*_init(). + Only PCI devices currently use this, USB and platform DRM drivers have + their load method called with flags to 0. + + Driver Private & Performance Counters + + The driver private hangs off the main + drm_device structure and can be used for + tracking various device-specific bits of information, like register + offsets, command buffer status, register state for suspend/resume, etc. + At load time, a driver may simply allocate one and set + drm_device.dev_priv + appropriately; it should be freed and + drm_device.dev_priv + set to NULL when the driver is unloaded. + + + DRM supports several counters which were used for rough performance + characterization. This stat counter system is deprecated and should not + be used. If performance monitoring is desired, the developer should + investigate and potentially enhance the kernel perf and tracing + infrastructure to export GPU related performance information for + consumption by performance monitoring tools and applications. + + + + IRQ Registration + + The DRM core tries to facilitate IRQ handler registration and + unregistration by providing drm_irq_install and + drm_irq_uninstall functions. Those functions only + support a single interrupt per device. + + + + Both functions get the device IRQ by calling + drm_dev_to_irq. This inline function will call a + bus-specific operation to retrieve the IRQ number. For platform devices, + platform_get_irq(..., 0) is used to retrieve the + IRQ number. + + + drm_irq_install starts by calling the + irq_preinstall driver operation. The operation + is optional and must make sure that the interrupt will not get fired by + clearing all pending interrupt flags or disabling the interrupt. + + + The IRQ will then be requested by a call to + request_irq. If the DRIVER_IRQ_SHARED driver + feature flag is set, a shared (IRQF_SHARED) IRQ handler will be + requested. + + + The IRQ handler function must be provided as the mandatory irq_handler + driver operation. It will get passed directly to + request_irq and thus has the same prototype as all + IRQ handlers. It will get called with a pointer to the DRM device as the + second argument. + + + Finally the function calls the optional + irq_postinstall driver operation. The operation + usually enables interrupts (excluding the vblank interrupt, which is + enabled separately), but drivers may choose to enable/disable interrupts + at a different time. + + + drm_irq_uninstall is similarly used to uninstall an + IRQ handler. It starts by waking up all processes waiting on a vblank + interrupt to make sure they don't hang, and then calls the optional + irq_uninstall driver operation. The operation + must disable all hardware interrupts. Finally the function frees the IRQ + by calling free_irq. + + + + Memory Manager Initialization + + Every DRM driver requires a memory manager which must be initialized at + load time. DRM currently contains two memory managers, the Translation + Table Manager (TTM) and the Graphics Execution Manager (GEM). + This document describes the use of the GEM memory manager only. See + for details. + + + + Miscellaneous Device Configuration + + Another task that may be necessary for PCI devices during configuration + is mapping the video BIOS. On many devices, the VBIOS describes device + configuration, LCD panel timings (if any), and contains flags indicating + device state. Mapping the BIOS can be done using the pci_map_rom() call, + a convenience function that takes care of mapping the actual ROM, + whether it has been shadowed into memory (typically at address 0xc0000) + or exists on the PCI device in the ROM BAR. Note that after the ROM has + been mapped and any necessary information has been extracted, it should + be unmapped; on many devices, the ROM address decoder is shared with + other BARs, so leaving it mapped could cause undesired behaviour like + hangs or memory corruption. + + + + - - Configuring the device - - Obviously, device configuration is device-specific. - However, there are several common operations: finding a - device's PCI resources, mapping them, and potentially setting - up an IRQ handler. - - - Finding & mapping resources is fairly straightforward. The - DRM wrapper functions, drm_get_resource_start() and - drm_get_resource_len(), may be used to find BARs on the given - drm_device struct. Once those values have been retrieved, the - driver load function can call drm_addmap() to create a new - mapping for the BAR in question. Note that you probably want a - drm_local_map_t in your driver private structure to track any - mappings you create. - - - - - if compatibility with other operating systems isn't a concern - (DRM drivers can run under various BSD variants and OpenSolaris), - native Linux calls may be used for the above, e.g. pci_resource_* - and iomap*/iounmap. See the Linux device driver book for more - info. - - - Once you have a register map, you may use the DRM_READn() and - DRM_WRITEn() macros to access the registers on your device, or - use driver-specific versions to offset into your MMIO space - relative to a driver-specific base pointer (see I915_READ for - an example). - - - If your device supports interrupt generation, you may want to - set up an interrupt handler when the driver is loaded. This - is done using the drm_irq_install() function. If your device - supports vertical blank interrupts, it should call - drm_vblank_init() to initialize the core vblank handling code before - enabling interrupts on your device. This ensures the vblank related - structures are allocated and allows the core to handle vblank events. - - - - Once your interrupt handler is registered (it uses your - drm_driver.irq_handler as the actual interrupt handling - function), you can safely enable interrupts on your device, - assuming any other state your interrupt handler uses is also - initialized. - - - Another task that may be necessary during configuration is - mapping the video BIOS. On many devices, the VBIOS describes - device configuration, LCD panel timings (if any), and contains - flags indicating device state. Mapping the BIOS can be done - using the pci_map_rom() call, a convenience function that - takes care of mapping the actual ROM, whether it has been - shadowed into memory (typically at address 0xc0000) or exists - on the PCI device in the ROM BAR. Note that after the ROM - has been mapped and any necessary information has been extracted, - it should be unmapped; on many devices, the ROM address decoder is - shared with other BARs, so leaving it mapped could cause - undesired behavior like hangs or memory corruption. - - - + + + Memory management + + Modern Linux systems require large amount of graphics memory to store + frame buffers, textures, vertices and other graphics-related data. Given + the very dynamic nature of many of that data, managing graphics memory + efficiently is thus crucial for the graphics stack and plays a central + role in the DRM infrastructure. + + + The DRM core includes two memory managers, namely Translation Table Maps + (TTM) and Graphics Execution Manager (GEM). TTM was the first DRM memory + manager to be developed and tried to be a one-size-fits-them all + solution. It provides a single userspace API to accomodate the need of + all hardware, supporting both Unified Memory Architecture (UMA) devices + and devices with dedicated video RAM (i.e. most discrete video cards). + This resulted in a large, complex piece of code that turned out to be + hard to use for driver development. + + + GEM started as an Intel-sponsored project in reaction to TTM's + complexity. Its design philosophy is completely different: instead of + providing a solution to every graphics memory-related problems, GEM + identified common code between drivers and created a support library to + share it. GEM has simpler initialization and execution requirements than + TTM, but has no video RAM management capabitilies and is thus limited to + UMA devices. + - Memory manager initialization - - In order to allocate command buffers, cursor memory, scanout - buffers, etc., as well as support the latest features provided - by packages like Mesa and the X.Org X server, your driver - should support a memory manager. - + The Translation Table Manager (TTM) - If your driver supports memory management (it should!), you - need to set that up at load time as well. How you initialize - it depends on which memory manager you're using: TTM or GEM. + TTM design background and information belongs here. TTM initialization - - TTM (for Translation Table Manager) manages video memory and - aperture space for graphics devices. TTM supports both UMA devices - and devices with dedicated video RAM (VRAM), i.e. most discrete - graphics devices. If your device has dedicated RAM, supporting - TTM is desirable. TTM also integrates tightly with your - driver-specific buffer execution function. See the radeon - driver for examples. - - - The core TTM structure is the ttm_bo_driver struct. It contains - several fields with function pointers for initializing the TTM, - allocating and freeing memory, waiting for command completion - and fence synchronization, and memory migration. See the - radeon_ttm.c file for an example of usage. + This section is outdated. + + Drivers wishing to support TTM must fill out a drm_bo_driver + structure. The structure contains several fields with function + pointers for initializing the TTM, allocating and freeing memory, + waiting for command completion and fence synchronization, and memory + migration. See the radeon_ttm.c file for an example of usage. The ttm_global_reference structure is made up of several fields: @@ -445,82 +500,1081 @@ count for the TTM, which will call your initialization function. + + + The Graphics Execution Manager (GEM) + + The GEM design approach has resulted in a memory manager that doesn't + provide full coverage of all (or even all common) use cases in its + userspace or kernel API. GEM exposes a set of standard memory-related + operations to userspace and a set of helper functions to drivers, and let + drivers implement hardware-specific operations with their own private API. + + + The GEM userspace API is described in the + GEM - the Graphics + Execution Manager article on LWN. While slightly + outdated, the document provides a good overview of the GEM API principles. + Buffer allocation and read and write operations, described as part of the + common GEM API, are currently implemented using driver-specific ioctls. + + + GEM is data-agnostic. It manages abstract buffer objects without knowing + what individual buffers contain. APIs that require knowledge of buffer + contents or purpose, such as buffer allocation or synchronization + primitives, are thus outside of the scope of GEM and must be implemented + using driver-specific ioctls. + + + On a fundamental level, GEM involves several operations: + + Memory allocation and freeing + Command execution + Aperture management at command execution time + + Buffer object allocation is relatively straightforward and largely + provided by Linux's shmem layer, which provides memory to back each + object. + + + Device-specific operations, such as command execution, pinning, buffer + read & write, mapping, and domain ownership transfers are left to + driver-specific ioctls. + + + GEM Initialization + + Drivers that use GEM must set the DRIVER_GEM bit in the struct + drm_driver + driver_features field. The DRM core will + then automatically initialize the GEM core before calling the + load operation. Behind the scene, this will + create a DRM Memory Manager object which provides an address space + pool for object allocation. + + + In a KMS configuration, drivers need to allocate and initialize a + command ring buffer following core GEM initialization if required by + the hardware. UMA devices usually have what is called a "stolen" + memory region, which provides space for the initial framebuffer and + large, contiguous memory regions required by the device. This space is + typically not managed by GEM, and must be initialized separately into + its own DRM MM object. + + - GEM initialization - - GEM is an alternative to TTM, designed specifically for UMA - devices. It has simpler initialization and execution requirements - than TTM, but has no VRAM management capability. Core GEM - is initialized by calling drm_mm_init() to create - a GTT DRM MM object, which provides an address space pool for - object allocation. In a KMS configuration, the driver - needs to allocate and initialize a command ring buffer following - core GEM initialization. A UMA device usually has what is called a - "stolen" memory region, which provides space for the initial - framebuffer and large, contiguous memory regions required by the - device. This space is not typically managed by GEM, and it must - be initialized separately into its own DRM MM object. - - - Initialization is driver-specific. In the case of Intel - integrated graphics chips like 965GM, GEM initialization can - be done by calling the internal GEM init function, - i915_gem_do_init(). Since the 965GM is a UMA device - (i.e. it doesn't have dedicated VRAM), GEM manages - making regular RAM available for GPU operations. Memory set - aside by the BIOS (called "stolen" memory by the i915 - driver) is managed by the DRM memrange allocator; the - rest of the aperture is managed by GEM. - - /* Basic memrange allocator for stolen space (aka vram) */ - drm_memrange_init(&dev_priv->vram, 0, prealloc_size); - /* Let GEM Manage from end of prealloc space to end of aperture */ - i915_gem_do_init(dev, prealloc_size, agp_size); - - - - - Once the memory manager has been set up, we may allocate the - command buffer. In the i915 case, this is also done with a - GEM function, i915_gem_init_ringbuffer(). - + GEM Objects Creation + + GEM splits creation of GEM objects and allocation of the memory that + backs them in two distinct operations. + + + GEM objects are represented by an instance of struct + drm_gem_object. Drivers usually need to extend + GEM objects with private information and thus create a driver-specific + GEM object structure type that embeds an instance of struct + drm_gem_object. + + + To create a GEM object, a driver allocates memory for an instance of its + specific GEM object type and initializes the embedded struct + drm_gem_object with a call to + drm_gem_object_init. The function takes a pointer to + the DRM device, a pointer to the GEM object and the buffer object size + in bytes. + + + GEM uses shmem to allocate anonymous pageable memory. + drm_gem_object_init will create an shmfs file of + the requested size and store it into the struct + drm_gem_object filp + field. The memory is used as either main storage for the object when the + graphics hardware uses system memory directly or as a backing store + otherwise. + + + Drivers are responsible for the actual physical pages allocation by + calling shmem_read_mapping_page_gfp for each page. + Note that they can decide to allocate pages when initializing the GEM + object, or to delay allocation until the memory is needed (for instance + when a page fault occurs as a result of a userspace memory access or + when the driver needs to start a DMA transfer involving the memory). + + + Anonymous pageable memory allocation is not always desired, for instance + when the hardware requires physically contiguous system memory as is + often the case in embedded devices. Drivers can create GEM objects with + no shmfs backing (called private GEM objects) by initializing them with + a call to drm_gem_private_object_init instead of + drm_gem_object_init. Storage for private GEM + objects must be managed by drivers. + + + Drivers that do not need to extend GEM objects with private information + can call the drm_gem_object_alloc function to + allocate and initialize a struct drm_gem_object + instance. The GEM core will call the optional driver + gem_init_object operation after initializing + the GEM object with drm_gem_object_init. + int (*gem_init_object) (struct drm_gem_object *obj); + + + No alloc-and-init function exists for private GEM objects. + + + + GEM Objects Lifetime + + All GEM objects are reference-counted by the GEM core. References can be + acquired and release by calling drm_gem_object_reference + and drm_gem_object_unreference respectively. The + caller must hold the drm_device + struct_mutex lock. As a convenience, GEM + provides the drm_gem_object_reference_unlocked and + drm_gem_object_unreference_unlocked functions that + can be called without holding the lock. + + + When the last reference to a GEM object is released the GEM core calls + the drm_driver + gem_free_object operation. That operation is + mandatory for GEM-enabled drivers and must free the GEM object and all + associated resources. + + + void (*gem_free_object) (struct drm_gem_object *obj); + Drivers are responsible for freeing all GEM object resources, including + the resources created by the GEM core. If an mmap offset has been + created for the object (in which case + drm_gem_object::map_list::map + is not NULL) it must be freed by a call to + drm_gem_free_mmap_offset. The shmfs backing store + must be released by calling drm_gem_object_release + (that function can safely be called if no shmfs backing store has been + created). + + + + GEM Objects Naming + + Communication between userspace and the kernel refers to GEM objects + using local handles, global names or, more recently, file descriptors. + All of those are 32-bit integer values; the usual Linux kernel limits + apply to the file descriptors. + + + GEM handles are local to a DRM file. Applications get a handle to a GEM + object through a driver-specific ioctl, and can use that handle to refer + to the GEM object in other standard or driver-specific ioctls. Closing a + DRM file handle frees all its GEM handles and dereferences the + associated GEM objects. + + + To create a handle for a GEM object drivers call + drm_gem_handle_create. The function takes a pointer + to the DRM file and the GEM object and returns a locally unique handle. + When the handle is no longer needed drivers delete it with a call to + drm_gem_handle_delete. Finally the GEM object + associated with a handle can be retrieved by a call to + drm_gem_object_lookup. + + + Handles don't take ownership of GEM objects, they only take a reference + to the object that will be dropped when the handle is destroyed. To + avoid leaking GEM objects, drivers must make sure they drop the + reference(s) they own (such as the initial reference taken at object + creation time) as appropriate, without any special consideration for the + handle. For example, in the particular case of combined GEM object and + handle creation in the implementation of the + dumb_create operation, drivers must drop the + initial reference to the GEM object before returning the handle. + + + GEM names are similar in purpose to handles but are not local to DRM + files. They can be passed between processes to reference a GEM object + globally. Names can't be used directly to refer to objects in the DRM + API, applications must convert handles to names and names to handles + using the DRM_IOCTL_GEM_FLINK and DRM_IOCTL_GEM_OPEN ioctls + respectively. The conversion is handled by the DRM core without any + driver-specific support. + + + Similar to global names, GEM file descriptors are also used to share GEM + objects across processes. They offer additional security: as file + descriptors must be explictly sent over UNIX domain sockets to be shared + between applications, they can't be guessed like the globally unique GEM + names. + + + Drivers that support GEM file descriptors, also known as the DRM PRIME + API, must set the DRIVER_PRIME bit in the struct + drm_driver + driver_features field, and implement the + prime_handle_to_fd and + prime_fd_to_handle operations. + + + int (*prime_handle_to_fd)(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, + uint32_t flags, int *prime_fd); + int (*prime_fd_to_handle)(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, + uint32_t *handle); + Those two operations convert a handle to a PRIME file descriptor and + vice versa. Drivers must use the kernel dma-buf buffer sharing framework + to manage the PRIME file descriptors. + + + While non-GEM drivers must implement the operations themselves, GEM + drivers must use the drm_gem_prime_handle_to_fd + and drm_gem_prime_fd_to_handle helper functions. + Those helpers rely on the driver + gem_prime_export and + gem_prime_import operations to create a dma-buf + instance from a GEM object (dma-buf exporter role) and to create a GEM + object from a dma-buf instance (dma-buf importer role). + + + struct dma_buf * (*gem_prime_export)(struct drm_device *dev, + struct drm_gem_object *obj, + int flags); + struct drm_gem_object * (*gem_prime_import)(struct drm_device *dev, + struct dma_buf *dma_buf); + These two operations are mandatory for GEM drivers that support DRM + PRIME. + + + + GEM Objects Mapping + + Because mapping operations are fairly heavyweight GEM favours + read/write-like access to buffers, implemented through driver-specific + ioctls, over mapping buffers to userspace. However, when random access + to the buffer is needed (to perform software rendering for instance), + direct access to the object can be more efficient. + + + The mmap system call can't be used directly to map GEM objects, as they + don't have their own file handle. Two alternative methods currently + co-exist to map GEM objects to userspace. The first method uses a + driver-specific ioctl to perform the mapping operation, calling + do_mmap under the hood. This is often considered + dubious, seems to be discouraged for new GEM-enabled drivers, and will + thus not be described here. + + + The second method uses the mmap system call on the DRM file handle. + void *mmap(void *addr, size_t length, int prot, int flags, int fd, + off_t offset); + DRM identifies the GEM object to be mapped by a fake offset passed + through the mmap offset argument. Prior to being mapped, a GEM object + must thus be associated with a fake offset. To do so, drivers must call + drm_gem_create_mmap_offset on the object. The + function allocates a fake offset range from a pool and stores the + offset divided by PAGE_SIZE in + obj->map_list.hash.key. Care must be taken not to + call drm_gem_create_mmap_offset if a fake offset + has already been allocated for the object. This can be tested by + obj->map_list.map being non-NULL. + + + Once allocated, the fake offset value + (obj->map_list.hash.key << PAGE_SHIFT) + must be passed to the application in a driver-specific way and can then + be used as the mmap offset argument. + + + The GEM core provides a helper method drm_gem_mmap + to handle object mapping. The method can be set directly as the mmap + file operation handler. It will look up the GEM object based on the + offset value and set the VMA operations to the + drm_driver gem_vm_ops + field. Note that drm_gem_mmap doesn't map memory to + userspace, but relies on the driver-provided fault handler to map pages + individually. + + + To use drm_gem_mmap, drivers must fill the struct + drm_driver gem_vm_ops + field with a pointer to VM operations. + + + struct vm_operations_struct *gem_vm_ops + + struct vm_operations_struct { + void (*open)(struct vm_area_struct * area); + void (*close)(struct vm_area_struct * area); + int (*fault)(struct vm_area_struct *vma, struct vm_fault *vmf); + }; + + + The open and close + operations must update the GEM object reference count. Drivers can use + the drm_gem_vm_open and + drm_gem_vm_close helper functions directly as open + and close handlers. + + + The fault operation handler is responsible for mapping individual pages + to userspace when a page fault occurs. Depending on the memory + allocation scheme, drivers can allocate pages at fault time, or can + decide to allocate memory for the GEM object at the time the object is + created. + + + Drivers that want to map the GEM object upfront instead of handling page + faults can implement their own mmap file operation handler. + + + + Dumb GEM Objects + + The GEM API doesn't standardize GEM objects creation and leaves it to + driver-specific ioctls. While not an issue for full-fledged graphics + stacks that include device-specific userspace components (in libdrm for + instance), this limit makes DRM-based early boot graphics unnecessarily + complex. + + + Dumb GEM objects partly alleviate the problem by providing a standard + API to create dumb buffers suitable for scanout, which can then be used + to create KMS frame buffers. + + + To support dumb GEM objects drivers must implement the + dumb_create, + dumb_destroy and + dumb_map_offset operations. + + + + int (*dumb_create)(struct drm_file *file_priv, struct drm_device *dev, + struct drm_mode_create_dumb *args); + + The dumb_create operation creates a GEM + object suitable for scanout based on the width, height and depth + from the struct drm_mode_create_dumb + argument. It fills the argument's handle, + pitch and size + fields with a handle for the newly created GEM object and its line + pitch and size in bytes. + + + + int (*dumb_destroy)(struct drm_file *file_priv, struct drm_device *dev, + uint32_t handle); + + The dumb_destroy operation destroys a dumb + GEM object created by dumb_create. + + + + int (*dumb_map_offset)(struct drm_file *file_priv, struct drm_device *dev, + uint32_t handle, uint64_t *offset); + + The dumb_map_offset operation associates an + mmap fake offset with the GEM object given by the handle and returns + it. Drivers must use the + drm_gem_create_mmap_offset function to + associate the fake offset as described in + . + + + + + + Memory Coherency + + When mapped to the device or used in a command buffer, backing pages + for an object are flushed to memory and marked write combined so as to + be coherent with the GPU. Likewise, if the CPU accesses an object + after the GPU has finished rendering to the object, then the object + must be made coherent with the CPU's view of memory, usually involving + GPU cache flushing of various kinds. This core CPU<->GPU + coherency management is provided by a device-specific ioctl, which + evaluates an object's current domain and performs any necessary + flushing or synchronization to put the object into the desired + coherency domain (note that the object may be busy, i.e. an active + render target; in that case, setting the domain blocks the client and + waits for rendering to complete before performing any necessary + flushing operations). + + + + Command Execution + + Perhaps the most important GEM function for GPU devices is providing a + command execution interface to clients. Client programs construct + command buffers containing references to previously allocated memory + objects, and then submit them to GEM. At that point, GEM takes care to + bind all the objects into the GTT, execute the buffer, and provide + necessary synchronization between clients accessing the same buffers. + This often involves evicting some objects from the GTT and re-binding + others (a fairly expensive operation), and providing relocation + support which hides fixed GTT offsets from clients. Clients must take + care not to submit command buffers that reference more objects than + can fit in the GTT; otherwise, GEM will reject them and no rendering + will occur. Similarly, if several objects in the buffer require fence + registers to be allocated for correct rendering (e.g. 2D blits on + pre-965 chips), care must be taken not to require more fence registers + than are available to the client. Such resource management should be + abstracted from the client in libdrm. + + + + + + Mode Setting + + Drivers must initialize the mode setting core by calling + drm_mode_config_init on the DRM device. The function + initializes the drm_device + mode_config field and never fails. Once done, + mode configuration must be setup by initializing the following fields. + + + + int min_width, min_height; +int max_width, max_height; + + Minimum and maximum width and height of the frame buffers in pixel + units. + + + + struct drm_mode_config_funcs *funcs; + Mode setting functions. + + - Output configuration + Frame Buffer Creation + struct drm_framebuffer *(*fb_create)(struct drm_device *dev, + struct drm_file *file_priv, + struct drm_mode_fb_cmd2 *mode_cmd); - The final initialization task is output configuration. This involves: - - - Finding and initializing the CRTCs, encoders, and connectors - for the device. - - - Creating an initial configuration. - - - Registering a framebuffer console driver. - - + Frame buffers are abstract memory objects that provide a source of + pixels to scanout to a CRTC. Applications explicitly request the + creation of frame buffers through the DRM_IOCTL_MODE_ADDFB(2) ioctls and + receive an opaque handle that can be passed to the KMS CRTC control, + plane configuration and page flip functions. + + + Frame buffers rely on the underneath memory manager for low-level memory + operations. When creating a frame buffer applications pass a memory + handle (or a list of memory handles for multi-planar formats) through + the drm_mode_fb_cmd2 argument. This document + assumes that the driver uses GEM, those handles thus reference GEM + objects. + + + Drivers must first validate the requested frame buffer parameters passed + through the mode_cmd argument. In particular this is where invalid + sizes, pixel formats or pitches can be caught. + + + If the parameters are deemed valid, drivers then create, initialize and + return an instance of struct drm_framebuffer. + If desired the instance can be embedded in a larger driver-specific + structure. The new instance is initialized with a call to + drm_framebuffer_init which takes a pointer to DRM + frame buffer operations (struct + drm_framebuffer_funcs). Frame buffer operations are + + + int (*create_handle)(struct drm_framebuffer *fb, + struct drm_file *file_priv, unsigned int *handle); + + Create a handle to the frame buffer underlying memory object. If + the frame buffer uses a multi-plane format, the handle will + reference the memory object associated with the first plane. + + + Drivers call drm_gem_handle_create to create + the handle. + + + + void (*destroy)(struct drm_framebuffer *framebuffer); + + Destroy the frame buffer object and frees all associated + resources. Drivers must call + drm_framebuffer_cleanup to free resources + allocated by the DRM core for the frame buffer object, and must + make sure to unreference all memory objects associated with the + frame buffer. Handles created by the + create_handle operation are released by + the DRM core. + + + + int (*dirty)(struct drm_framebuffer *framebuffer, + struct drm_file *file_priv, unsigned flags, unsigned color, + struct drm_clip_rect *clips, unsigned num_clips); + + This optional operation notifies the driver that a region of the + frame buffer has changed in response to a DRM_IOCTL_MODE_DIRTYFB + ioctl call. + + + + + + After initializing the drm_framebuffer + instance drivers must fill its width, + height, pitches, + offsets, depth, + bits_per_pixel and + pixel_format fields from the values passed + through the drm_mode_fb_cmd2 argument. They + should call the drm_helper_mode_fill_fb_struct + helper function to do so. + + + + Output Polling + void (*output_poll_changed)(struct drm_device *dev); + + This operation notifies the driver that the status of one or more + connectors has changed. Drivers that use the fb helper can just call the + drm_fb_helper_hotplug_event function to handle this + operation. + + + + + + + + KMS Initialization and Cleanup + + A KMS device is abstracted and exposed as a set of planes, CRTCs, encoders + and connectors. KMS drivers must thus create and initialize all those + objects at load time after initializing mode setting. + + + CRTCs (struct <structname>drm_crtc</structname>) + + A CRTC is an abstraction representing a part of the chip that contains a + pointer to a scanout buffer. Therefore, the number of CRTCs available + determines how many independent scanout buffers can be active at any + given time. The CRTC structure contains several fields to support this: + a pointer to some video memory (abstracted as a frame buffer object), a + display mode, and an (x, y) offset into the video memory to support + panning or configurations where one piece of video memory spans multiple + CRTCs. - Output discovery and initialization - - Several core functions exist to create CRTCs, encoders, and - connectors, namely: drm_crtc_init(), drm_connector_init(), and - drm_encoder_init(), along with several "helper" functions to - perform common tasks. - - - Connectors should be registered with sysfs once they've been - detected and initialized, using the - drm_sysfs_connector_add() function. Likewise, when they're - removed from the system, they should be destroyed with - drm_sysfs_connector_remove(). - - -CRTC Initialization + + A KMS device must create and register at least one struct + drm_crtc instance. The instance is allocated + and zeroed by the driver, possibly as part of a larger structure, and + registered with a call to drm_crtc_init with a + pointer to CRTC functions. + + + + CRTC Operations + + Set Configuration + int (*set_config)(struct drm_mode_set *set); + + Apply a new CRTC configuration to the device. The configuration + specifies a CRTC, a frame buffer to scan out from, a (x,y) position in + the frame buffer, a display mode and an array of connectors to drive + with the CRTC if possible. + + + If the frame buffer specified in the configuration is NULL, the driver + must detach all encoders connected to the CRTC and all connectors + attached to those encoders and disable them. + + + This operation is called with the mode config lock held. + + + FIXME: How should set_config interact with DPMS? If the CRTC is + suspended, should it be resumed? + + + + Page Flipping + int (*page_flip)(struct drm_crtc *crtc, struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event); + + Schedule a page flip to the given frame buffer for the CRTC. This + operation is called with the mode config mutex held. + + + Page flipping is a synchronization mechanism that replaces the frame + buffer being scanned out by the CRTC with a new frame buffer during + vertical blanking, avoiding tearing. When an application requests a page + flip the DRM core verifies that the new frame buffer is large enough to + be scanned out by the CRTC in the currently configured mode and then + calls the CRTC page_flip operation with a + pointer to the new frame buffer. + + + The page_flip operation schedules a page flip. + Once any pending rendering targetting the new frame buffer has + completed, the CRTC will be reprogrammed to display that frame buffer + after the next vertical refresh. The operation must return immediately + without waiting for rendering or page flip to complete and must block + any new rendering to the frame buffer until the page flip completes. + + + If a page flip is already pending, the + page_flip operation must return + -EBUSY. + + + To synchronize page flip to vertical blanking the driver will likely + need to enable vertical blanking interrupts. It should call + drm_vblank_get for that purpose, and call + drm_vblank_put after the page flip completes. + + + If the application has requested to be notified when page flip completes + the page_flip operation will be called with a + non-NULL event argument pointing to a + drm_pending_vblank_event instance. Upon page + flip completion the driver must fill the + event::event + sequence, tv_sec + and tv_usec fields with the associated + vertical blanking count and timestamp, add the event to the + drm_file list of events to be signaled, and wake + up any waiting process. This can be performed with + event.sequence = drm_vblank_count_and_time(..., &now); + event->event.tv_sec = now.tv_sec; + event->event.tv_usec = now.tv_usec; + + spin_lock_irqsave(&dev->event_lock, flags); + list_add_tail(&event->base.link, &event->base.file_priv->event_list); + wake_up_interruptible(&event->base.file_priv->event_wait); + spin_unlock_irqrestore(&dev->event_lock, flags); + ]]> + + + FIXME: Could drivers that don't need to wait for rendering to complete + just add the event to dev->vblank_event_list and + let the DRM core handle everything, as for "normal" vertical blanking + events? + + + While waiting for the page flip to complete, the + event->base.link list head can be used freely by + the driver to store the pending event in a driver-specific list. + + + If the file handle is closed before the event is signaled, drivers must + take care to destroy the event in their + preclose operation (and, if needed, call + drm_vblank_put). + + + + Miscellaneous + + + void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, + uint32_t start, uint32_t size); + + Apply a gamma table to the device. The operation is optional. + + + + void (*destroy)(struct drm_crtc *crtc); + + Destroy the CRTC when not needed anymore. See + . + + + + + + + + Planes (struct <structname>drm_plane</structname>) + + A plane represents an image source that can be blended with or overlayed + on top of a CRTC during the scanout process. Planes are associated with + a frame buffer to crop a portion of the image memory (source) and + optionally scale it to a destination size. The result is then blended + with or overlayed on top of a CRTC. + + + Plane Initialization + + Planes are optional. To create a plane, a KMS drivers allocates and + zeroes an instances of struct drm_plane + (possibly as part of a larger structure) and registers it with a call + to drm_plane_init. The function takes a bitmask + of the CRTCs that can be associated with the plane, a pointer to the + plane functions and a list of format supported formats. + + + + Plane Operations + + + int (*update_plane)(struct drm_plane *plane, struct drm_crtc *crtc, + struct drm_framebuffer *fb, int crtc_x, int crtc_y, + unsigned int crtc_w, unsigned int crtc_h, + uint32_t src_x, uint32_t src_y, + uint32_t src_w, uint32_t src_h); + + Enable and configure the plane to use the given CRTC and frame buffer. + + + The source rectangle in frame buffer memory coordinates is given by + the src_x, src_y, + src_w and src_h + parameters (as 16.16 fixed point values). Devices that don't support + subpixel plane coordinates can ignore the fractional part. + + + The destination rectangle in CRTC coordinates is given by the + crtc_x, crtc_y, + crtc_w and crtc_h + parameters (as integer values). Devices scale the source rectangle to + the destination rectangle. If scaling is not supported, and the source + rectangle size doesn't match the destination rectangle size, the + driver must return a -EINVAL error. + + + + int (*disable_plane)(struct drm_plane *plane); + + Disable the plane. The DRM core calls this method in response to a + DRM_IOCTL_MODE_SETPLANE ioctl call with the frame buffer ID set to 0. + Disabled planes must not be processed by the CRTC. + + + + void (*destroy)(struct drm_plane *plane); + + Destroy the plane when not needed anymore. See + . + + + + + + + Encoders (struct <structname>drm_encoder</structname>) + + An encoder takes pixel data from a CRTC and converts it to a format + suitable for any attached connectors. On some devices, it may be + possible to have a CRTC send data to more than one encoder. In that + case, both encoders would receive data from the same scanout buffer, + resulting in a "cloned" display configuration across the connectors + attached to each encoder. + + + Encoder Initialization + + As for CRTCs, a KMS driver must create, initialize and register at + least one struct drm_encoder instance. The + instance is allocated and zeroed by the driver, possibly as part of a + larger structure. + + + Drivers must initialize the struct drm_encoder + possible_crtcs and + possible_clones fields before registering the + encoder. Both fields are bitmasks of respectively the CRTCs that the + encoder can be connected to, and sibling encoders candidate for cloning. + + + After being initialized, the encoder must be registered with a call to + drm_encoder_init. The function takes a pointer to + the encoder functions and an encoder type. Supported types are + + + DRM_MODE_ENCODER_DAC for VGA and analog on DVI-I/DVI-A + + + DRM_MODE_ENCODER_TMDS for DVI, HDMI and (embedded) DisplayPort + + + DRM_MODE_ENCODER_LVDS for display panels + + + DRM_MODE_ENCODER_TVDAC for TV output (Composite, S-Video, Component, + SCART) + + + DRM_MODE_ENCODER_VIRTUAL for virtual machine displays + + + + + Encoders must be attached to a CRTC to be used. DRM drivers leave + encoders unattached at initialization time. Applications (or the fbdev + compatibility layer when implemented) are responsible for attaching the + encoders they want to use to a CRTC. + + + + Encoder Operations + + + void (*destroy)(struct drm_encoder *encoder); + + Called to destroy the encoder when not needed anymore. See + . + + + + + + + Connectors (struct <structname>drm_connector</structname>) + + A connector is the final destination for pixel data on a device, and + usually connects directly to an external display device like a monitor + or laptop panel. A connector can only be attached to one encoder at a + time. The connector is also the structure where information about the + attached display is kept, so it contains fields for display data, EDID + data, DPMS & connection status, and information about modes + supported on the attached displays. + + + Connector Initialization + + Finally a KMS driver must create, initialize, register and attach at + least one struct drm_connector instance. The + instance is created as other KMS objects and initialized by setting the + following fields. + + + + interlace_allowed + + Whether the connector can handle interlaced modes. + + + + doublescan_allowed + + Whether the connector can handle doublescan. + + + + display_info + + + Display information is filled from EDID information when a display + is detected. For non hot-pluggable displays such as flat panels in + embedded systems, the driver should initialize the + display_info.width_mm + and + display_info.height_mm + fields with the physical size of the display. + + + + polled + + Connector polling mode, a combination of + + + DRM_CONNECTOR_POLL_HPD + + The connector generates hotplug events and doesn't need to be + periodically polled. The CONNECT and DISCONNECT flags must not + be set together with the HPD flag. + + + + DRM_CONNECTOR_POLL_CONNECT + + Periodically poll the connector for connection. + + + + DRM_CONNECTOR_POLL_DISCONNECT + + Periodically poll the connector for disconnection. + + + + Set to 0 for connectors that don't support connection status + discovery. + + + + + The connector is then registered with a call to + drm_connector_init with a pointer to the connector + functions and a connector type, and exposed through sysfs with a call to + drm_sysfs_connector_add. + + + Supported connector types are + + DRM_MODE_CONNECTOR_VGA + DRM_MODE_CONNECTOR_DVII + DRM_MODE_CONNECTOR_DVID + DRM_MODE_CONNECTOR_DVIA + DRM_MODE_CONNECTOR_Composite + DRM_MODE_CONNECTOR_SVIDEO + DRM_MODE_CONNECTOR_LVDS + DRM_MODE_CONNECTOR_Component + DRM_MODE_CONNECTOR_9PinDIN + DRM_MODE_CONNECTOR_DisplayPort + DRM_MODE_CONNECTOR_HDMIA + DRM_MODE_CONNECTOR_HDMIB + DRM_MODE_CONNECTOR_TV + DRM_MODE_CONNECTOR_eDP + DRM_MODE_CONNECTOR_VIRTUAL + + + + Connectors must be attached to an encoder to be used. For devices that + map connectors to encoders 1:1, the connector should be attached at + initialization time with a call to + drm_mode_connector_attach_encoder. The driver must + also set the drm_connector + encoder field to point to the attached + encoder. + + + Finally, drivers must initialize the connectors state change detection + with a call to drm_kms_helper_poll_init. If at + least one connector is pollable but can't generate hotplug interrupts + (indicated by the DRM_CONNECTOR_POLL_CONNECT and + DRM_CONNECTOR_POLL_DISCONNECT connector flags), a delayed work will + automatically be queued to periodically poll for changes. Connectors + that can generate hotplug interrupts must be marked with the + DRM_CONNECTOR_POLL_HPD flag instead, and their interrupt handler must + call drm_helper_hpd_irq_event. The function will + queue a delayed work to check the state of all connectors, but no + periodic polling will be done. + + + + Connector Operations + + Unless otherwise state, all operations are mandatory. + + + DPMS + void (*dpms)(struct drm_connector *connector, int mode); + + The DPMS operation sets the power state of a connector. The mode + argument is one of + + DRM_MODE_DPMS_ON + DRM_MODE_DPMS_STANDBY + DRM_MODE_DPMS_SUSPEND + DRM_MODE_DPMS_OFF + + + + In all but DPMS_ON mode the encoder to which the connector is attached + should put the display in low-power mode by driving its signals + appropriately. If more than one connector is attached to the encoder + care should be taken not to change the power state of other displays as + a side effect. Low-power mode should be propagated to the encoders and + CRTCs when all related connectors are put in low-power mode. + + + + Modes + int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, + uint32_t max_height); + + Fill the mode list with all supported modes for the connector. If the + max_width and max_height + arguments are non-zero, the implementation must ignore all modes wider + than max_width or higher than + max_height. + + + The connector must also fill in this operation its + display_info + width_mm and + height_mm fields with the connected display + physical size in millimeters. The fields should be set to 0 if the value + isn't known or is not applicable (for instance for projector devices). + + + + Connection Status + + The connection status is updated through polling or hotplug events when + supported (see ). The status + value is reported to userspace through ioctls and must not be used + inside the driver, as it only gets initialized by a call to + drm_mode_getconnector from userspace. + + enum drm_connector_status (*detect)(struct drm_connector *connector, + bool force); + + Check to see if anything is attached to the connector. The + force parameter is set to false whilst polling or + to true when checking the connector due to user request. + force can be used by the driver to avoid + expensive, destructive operations during automated probing. + + + Return connector_status_connected if something is connected to the + connector, connector_status_disconnected if nothing is connected and + connector_status_unknown if the connection state isn't known. + + + Drivers should only return connector_status_connected if the connection + status has really been probed as connected. Connectors that can't detect + the connection status, or failed connection status probes, should return + connector_status_unknown. + + + + Miscellaneous + + + void (*destroy)(struct drm_connector *connector); + + Destroy the connector when not needed anymore. See + . + + + + + + + + Cleanup + + The DRM core manages its objects' lifetime. When an object is not needed + anymore the core calls its destroy function, which must clean up and + free every resource allocated for the object. Every + drm_*_init call must be matched with a + corresponding drm_*_cleanup call to cleanup CRTCs + (drm_crtc_cleanup), planes + (drm_plane_cleanup), encoders + (drm_encoder_cleanup) and connectors + (drm_connector_cleanup). Furthermore, connectors + that have been added to sysfs must be removed by a call to + drm_sysfs_connector_remove before calling + drm_connector_cleanup. + + + Connectors state change detection must be cleanup up with a call to + drm_kms_helper_poll_fini. + + + + Output discovery and initialization example + - - - In the example above (again, taken from the i915 driver), a - CRT connector and encoder combination is created. A device-specific - i2c bus is also created for fetching EDID data and - performing monitor detection. Once the process is complete, - the new connector is registered with sysfs to make its - properties available to applications. - - - Helper functions and core functions - - Since many PC-class graphics devices have similar display output - designs, the DRM provides a set of helper functions to make - output management easier. The core helper routines handle - encoder re-routing and the disabling of unused functions following - mode setting. Using the helpers is optional, but recommended for - devices with PC-style architectures (i.e. a set of display planes - for feeding pixels to encoders which are in turn routed to - connectors). Devices with more complex requirements needing - finer grained management may opt to use the core callbacks - directly. - - - [Insert typical diagram here.] [Insert OMAP style config here.] - - - - Each encoder object needs to provide: - - - A DPMS (basically on/off) function. - - - A mode-fixup function (for converting requested modes into - native hardware timings). - - - Functions (prepare, set, and commit) for use by the core DRM - helper functions. - - - Connector helpers need to provide functions (mode-fetch, validity, - and encoder-matching) for returning an ideal encoder for a given - connector. The core connector functions include a DPMS callback, - save/restore routines (deprecated), detection, mode probing, - property handling, and cleanup functions. - - - - - +}]]> + + In the example above (taken from the i915 driver), a CRTC, connector and + encoder combination is created. A device-specific i2c bus is also + created for fetching EDID data and performing monitor detection. Once + the process is complete, the new connector is registered with sysfs to + make its properties available to applications. + - + - VBlank event handling + Mid-layer Helper Functions - The DRM core exposes two vertical blank related ioctls: - - - DRM_IOCTL_WAIT_VBLANK - - - This takes a struct drm_wait_vblank structure as its argument, - and it is used to block or request a signal when a specified - vblank event occurs. - - - - - DRM_IOCTL_MODESET_CTL - - - This should be called by application level drivers before and - after mode setting, since on many devices the vertical blank - counter is reset at that time. Internally, the DRM snapshots - the last vblank count when the ioctl is called with the - _DRM_PRE_MODESET command, so that the counter won't go backwards - (which is dealt with when _DRM_POST_MODESET is used). - - - - - + The CRTC, encoder and connector functions provided by the drivers + implement the DRM API. They're called by the DRM core and ioctl handlers + to handle device state changes and configuration request. As implementing + those functions often requires logic not specific to drivers, mid-layer + helper functions are available to avoid duplicating boilerplate code. + + + The DRM core contains one mid-layer implementation. The mid-layer provides + implementations of several CRTC, encoder and connector functions (called + from the top of the mid-layer) that pre-process requests and call + lower-level functions provided by the driver (at the bottom of the + mid-layer). For instance, the + drm_crtc_helper_set_config function can be used to + fill the struct drm_crtc_funcs + set_config field. When called, it will split + the set_config operation in smaller, simpler + operations and call the driver to handle them. - To support the functions above, the DRM core provides several - helper functions for tracking vertical blank counters, and - requires drivers to provide several callbacks: - get_vblank_counter(), enable_vblank() and disable_vblank(). The - core uses get_vblank_counter() to keep the counter accurate - across interrupt disable periods. It should return the current - vertical blank event count, which is often tracked in a device - register. The enable and disable vblank callbacks should enable - and disable vertical blank interrupts, respectively. In the - absence of DRM clients waiting on vblank events, the core DRM - code uses the disable_vblank() function to disable - interrupts, which saves power. They are re-enabled again when - a client calls the vblank wait ioctl above. + To use the mid-layer, drivers call drm_crtc_helper_add, + drm_encoder_helper_add and + drm_connector_helper_add functions to install their + mid-layer bottom operations handlers, and fill the + drm_crtc_funcs, + drm_encoder_funcs and + drm_connector_funcs structures with pointers to + the mid-layer top API functions. Installing the mid-layer bottom operation + handlers is best done right after registering the corresponding KMS object. - A device that doesn't provide a count register may simply use an - internal atomic counter incremented on every vertical blank - interrupt (and then treat the enable_vblank() and disable_vblank() - callbacks as no-ops). + The mid-layer is not split between CRTC, encoder and connector operations. + To use it, a driver must provide bottom functions for all of the three KMS + entities. + + Helper Functions + + + int drm_crtc_helper_set_config(struct drm_mode_set *set); + + The drm_crtc_helper_set_config helper function + is a CRTC set_config implementation. It + first tries to locate the best encoder for each connector by calling + the connector best_encoder helper + operation. + + + After locating the appropriate encoders, the helper function will + call the mode_fixup encoder and CRTC helper + operations to adjust the requested mode, or reject it completely in + which case an error will be returned to the application. If the new + configuration after mode adjustment is identical to the current + configuration the helper function will return without performing any + other operation. + + + If the adjusted mode is identical to the current mode but changes to + the frame buffer need to be applied, the + drm_crtc_helper_set_config function will call + the CRTC mode_set_base helper operation. If + the adjusted mode differs from the current mode, or if the + mode_set_base helper operation is not + provided, the helper function performs a full mode set sequence by + calling the prepare, + mode_set and + commit CRTC and encoder helper operations, + in that order. + + + + void drm_helper_connector_dpms(struct drm_connector *connector, int mode); + + The drm_helper_connector_dpms helper function + is a connector dpms implementation that + tracks power state of connectors. To use the function, drivers must + provide dpms helper operations for CRTCs + and encoders to apply the DPMS state to the device. + + + The mid-layer doesn't track the power state of CRTCs and encoders. + The dpms helper operations can thus be + called with a mode identical to the currently active mode. + + + + int drm_helper_probe_single_connector_modes(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY); + + The drm_helper_probe_single_connector_modes helper + function is a connector fill_modes + implementation that updates the connection status for the connector + and then retrieves a list of modes by calling the connector + get_modes helper operation. + + + The function filters out modes larger than + max_width and max_height + if specified. It then calls the connector + mode_valid helper operation for each mode in + the probed list to check whether the mode is valid for the connector. + + + + + + CRTC Helper Operations + + + bool (*mode_fixup)(struct drm_crtc *crtc, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + + Let CRTCs adjust the requested mode or reject it completely. This + operation returns true if the mode is accepted (possibly after being + adjusted) or false if it is rejected. + + + The mode_fixup operation should reject the + mode if it can't reasonably use it. The definition of "reasonable" + is currently fuzzy in this context. One possible behaviour would be + to set the adjusted mode to the panel timings when a fixed-mode + panel is used with hardware capable of scaling. Another behaviour + would be to accept any input mode and adjust it to the closest mode + supported by the hardware (FIXME: This needs to be clarified). + + + + int (*mode_set_base)(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb) + + Move the CRTC on the current frame buffer (stored in + crtc->fb) to position (x,y). Any of the frame + buffer, x position or y position may have been modified. + + + This helper operation is optional. If not provided, the + drm_crtc_helper_set_config function will fall + back to the mode_set helper operation. + + + FIXME: Why are x and y passed as arguments, as they can be accessed + through crtc->x and + crtc->y? + + + + void (*prepare)(struct drm_crtc *crtc); + + Prepare the CRTC for mode setting. This operation is called after + validating the requested mode. Drivers use it to perform + device-specific operations required before setting the new mode. + + + + int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, int x, int y, + struct drm_framebuffer *old_fb); + + Set a new mode, position and frame buffer. Depending on the device + requirements, the mode can be stored internally by the driver and + applied in the commit operation, or + programmed to the hardware immediately. + + + The mode_set operation returns 0 on success + or a negative error code if an error occurs. + + + + void (*commit)(struct drm_crtc *crtc); + + Commit a mode. This operation is called after setting the new mode. + Upon return the device must use the new mode and be fully + operational. + + + + + + Encoder Helper Operations + + + bool (*mode_fixup)(struct drm_encoder *encoder, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + + FIXME: The mode argument be const, but the i915 driver modifies + mode->clock in intel_dp_mode_fixup. + + + Let encoders adjust the requested mode or reject it completely. This + operation returns true if the mode is accepted (possibly after being + adjusted) or false if it is rejected. See the + mode_fixup CRTC helper + operation for an explanation of the allowed adjustments. + + + + void (*prepare)(struct drm_encoder *encoder); + + Prepare the encoder for mode setting. This operation is called after + validating the requested mode. Drivers use it to perform + device-specific operations required before setting the new mode. + + + + void (*mode_set)(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + + Set a new mode. Depending on the device requirements, the mode can + be stored internally by the driver and applied in the + commit operation, or programmed to the + hardware immediately. + + + + void (*commit)(struct drm_encoder *encoder); + + Commit a mode. This operation is called after setting the new mode. + Upon return the device must use the new mode and be fully + operational. + + + + + + Connector Helper Operations + + + struct drm_encoder *(*best_encoder)(struct drm_connector *connector); + + Return a pointer to the best encoder for the connecter. Device that + map connectors to encoders 1:1 simply return the pointer to the + associated encoder. This operation is mandatory. + + + + int (*get_modes)(struct drm_connector *connector); + + Fill the connector's probed_modes list + by parsing EDID data with drm_add_edid_modes or + calling drm_mode_probed_add directly for every + supported mode and return the number of modes it has detected. This + operation is mandatory. + + + When adding modes manually the driver creates each mode with a call to + drm_mode_create and must fill the following fields. + + + __u32 type; + + Mode type bitmask, a combination of + + + DRM_MODE_TYPE_BUILTIN + not used? + + + DRM_MODE_TYPE_CLOCK_C + not used? + + + DRM_MODE_TYPE_CRTC_C + not used? + + + + DRM_MODE_TYPE_PREFERRED - The preferred mode for the connector + + + not used? + + + + DRM_MODE_TYPE_DEFAULT + not used? + + + DRM_MODE_TYPE_USERDEF + not used? + + + DRM_MODE_TYPE_DRIVER + + + The mode has been created by the driver (as opposed to + to user-created modes). + + + + + Drivers must set the DRM_MODE_TYPE_DRIVER bit for all modes they + create, and set the DRM_MODE_TYPE_PREFERRED bit for the preferred + mode. + + + + __u32 clock; + Pixel clock frequency in kHz unit + + + __u16 hdisplay, hsync_start, hsync_end, htotal; + __u16 vdisplay, vsync_start, vsync_end, vtotal; + Horizontal and vertical timing information + <----------------><-------------><--------------> + + //////////////////////| + ////////////////////// | + ////////////////////// |.................. ................ + _______________ + + <----- [hv]display -----> + <------------- [hv]sync_start ------------> + <--------------------- [hv]sync_end ---------------------> + <-------------------------------- [hv]total -----------------------------> +]]> + + + __u16 hskew; + __u16 vscan; + Unknown + + + __u32 flags; + + Mode flags, a combination of + + + DRM_MODE_FLAG_PHSYNC + + Horizontal sync is active high + + + + DRM_MODE_FLAG_NHSYNC + + Horizontal sync is active low + + + + DRM_MODE_FLAG_PVSYNC + + Vertical sync is active high + + + + DRM_MODE_FLAG_NVSYNC + + Vertical sync is active low + + + + DRM_MODE_FLAG_INTERLACE + + Mode is interlaced + + + + DRM_MODE_FLAG_DBLSCAN + + Mode uses doublescan + + + + DRM_MODE_FLAG_CSYNC + + Mode uses composite sync + + + + DRM_MODE_FLAG_PCSYNC + + Composite sync is active high + + + + DRM_MODE_FLAG_NCSYNC + + Composite sync is active low + + + + DRM_MODE_FLAG_HSKEW + + hskew provided (not used?) + + + + DRM_MODE_FLAG_BCAST + + not used? + + + + DRM_MODE_FLAG_PIXMUX + + not used? + + + + DRM_MODE_FLAG_DBLCLK + + not used? + + + + DRM_MODE_FLAG_CLKDIV2 + + ? + + + + + + Note that modes marked with the INTERLACE or DBLSCAN flags will be + filtered out by + drm_helper_probe_single_connector_modes if + the connector's interlace_allowed or + doublescan_allowed field is set to 0. + + + + char name[DRM_DISPLAY_MODE_LEN]; + + Mode name. The driver must call + drm_mode_set_name to fill the mode name from + hdisplay, + vdisplay and interlace flag after + filling the corresponding fields. + + + + + + The vrefresh value is computed by + drm_helper_probe_single_connector_modes. + + + When parsing EDID data, drm_add_edid_modes fill the + connector display_info + width_mm and + height_mm fields. When creating modes + manually the get_modes helper operation must + set the display_info + width_mm and + height_mm fields if they haven't been set + already (for instance at initilization time when a fixed-size panel is + attached to the connector). The mode width_mm + and height_mm fields are only used internally + during EDID parsing and should not be set when creating modes manually. + + + + int (*mode_valid)(struct drm_connector *connector, + struct drm_display_mode *mode); + + Verify whether a mode is valid for the connector. Return MODE_OK for + supported modes and one of the enum drm_mode_status values (MODE_*) + for unsupported modes. This operation is mandatory. + + + As the mode rejection reason is currently not used beside for + immediately removing the unsupported mode, an implementation can + return MODE_BAD regardless of the exact reason why the mode is not + valid. + + + Note that the mode_valid helper operation is + only called for modes detected by the device, and + not for modes set by the user through the CRTC + set_config operation. + + + + - - Memory management + + + + Vertical Blanking + + Vertical blanking plays a major role in graphics rendering. To achieve + tear-free display, users must synchronize page flips and/or rendering to + vertical blanking. The DRM API offers ioctls to perform page flips + synchronized to vertical blanking and wait for vertical blanking. + + + The DRM core handles most of the vertical blanking management logic, which + involves filtering out spurious interrupts, keeping race-free blanking + counters, coping with counter wrap-around and resets and keeping use + counts. It relies on the driver to generate vertical blanking interrupts + and optionally provide a hardware vertical blanking counter. Drivers must + implement the following operations. + + + + int (*enable_vblank) (struct drm_device *dev, int crtc); +void (*disable_vblank) (struct drm_device *dev, int crtc); + + Enable or disable vertical blanking interrupts for the given CRTC. + + + + u32 (*get_vblank_counter) (struct drm_device *dev, int crtc); + + Retrieve the value of the vertical blanking counter for the given + CRTC. If the hardware maintains a vertical blanking counter its value + should be returned. Otherwise drivers can use the + drm_vblank_count helper function to handle this + operation. + + + - The memory manager lies at the heart of many DRM operations; it - is required to support advanced client features like OpenGL - pbuffers. The DRM currently contains two memory managers: TTM - and GEM. + Drivers must initialize the vertical blanking handling core with a call to + drm_vblank_init in their + load operation. The function will set the struct + drm_device + vblank_disable_allowed field to 0. This will + keep vertical blanking interrupts enabled permanently until the first mode + set operation, where vblank_disable_allowed is + set to 1. The reason behind this is not clear. Drivers can set the field + to 1 after calling drm_vblank_init to make vertical + blanking interrupts dynamically managed from the beginning. + + Vertical blanking interrupts can be enabled by the DRM core or by drivers + themselves (for instance to handle page flipping operations). The DRM core + maintains a vertical blanking use count to ensure that the interrupts are + not disabled while a user still needs them. To increment the use count, + drivers call drm_vblank_get. Upon return vertical + blanking interrupts are guaranteed to be enabled. + + + To decrement the use count drivers call + drm_vblank_put. Only when the use count drops to zero + will the DRM core disable the vertical blanking interrupts after a delay + by scheduling a timer. The delay is accessible through the vblankoffdelay + module parameter or the drm_vblank_offdelay global + variable and expressed in milliseconds. Its default value is 5000 ms. + + + When a vertical blanking interrupt occurs drivers only need to call the + drm_handle_vblank function to account for the + interrupt. + + + Resources allocated by drm_vblank_init must be freed + with a call to drm_vblank_cleanup in the driver + unload operation handler. + + + + + + Open/Close, File Operations and IOCTLs - The Translation Table Manager (TTM) + Open and Close + int (*firstopen) (struct drm_device *); +void (*lastclose) (struct drm_device *); +int (*open) (struct drm_device *, struct drm_file *); +void (*preclose) (struct drm_device *, struct drm_file *); +void (*postclose) (struct drm_device *, struct drm_file *); + Open and close handlers. None of those methods are mandatory. + - TTM was developed by Tungsten Graphics, primarily by Thomas - Hellström, and is intended to be a flexible, high performance - graphics memory manager. + The firstopen method is called by the DRM core + when an application opens a device that has no other opened file handle. + Similarly the lastclose method is called when + the last application holding a file handle opened on the device closes + it. Both methods are mostly used for UMS (User Mode Setting) drivers to + acquire and release device resources which should be done in the + load and unload + methods for KMS drivers. - Drivers wishing to support TTM must fill out a drm_bo_driver - structure. + Note that the lastclose method is also called + at module unload time or, for hot-pluggable devices, when the device is + unplugged. The firstopen and + lastclose calls can thus be unbalanced. - TTM design background and information belongs here. + The open method is called every time the device + is opened by an application. Drivers can allocate per-file private data + in this method and store them in the struct + drm_file driver_priv + field. Note that the open method is called + before firstopen. + + + The close operation is split into preclose and + postclose methods. Drivers must stop and + cleanup all per-file operations in the preclose + method. For instance pending vertical blanking and page flip events must + be cancelled. No per-file operation is allowed on the file handle after + returning from the preclose method. + + + Finally the postclose method is called as the + last step of the close operation, right before calling the + lastclose method if no other open file handle + exists for the device. Drivers that have allocated per-file private data + in the open method should free it here. + + + The lastclose method should restore CRTC and + plane properties to default value, so that a subsequent open of the + device will not inherit state from the previous user. - - The Graphics Execution Manager (GEM) + File Operations + const struct file_operations *fops + File operations for the DRM device node. - GEM is an Intel project, authored by Eric Anholt and Keith - Packard. It provides simpler interfaces than TTM, and is well - suited for UMA devices. + Drivers must define the file operations structure that forms the DRM + userspace API entry point, even though most of those operations are + implemented in the DRM core. The open, + release and ioctl + operations are handled by + + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .unlocked_ioctl = drm_ioctl, + #ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, + #endif + - GEM-enabled drivers must provide gem_init_object() and - gem_free_object() callbacks to support the core memory - allocation routines. They should also provide several driver-specific - ioctls to support command execution, pinning, buffer - read & write, mapping, and domain ownership transfers. + Drivers that implement private ioctls that requires 32/64bit + compatibility support must provide their own + compat_ioctl handler that processes private + ioctls and calls drm_compat_ioctl for core ioctls. - On a fundamental level, GEM involves several operations: - - Memory allocation and freeing - Command execution - Aperture management at command execution time - - Buffer object allocation is relatively - straightforward and largely provided by Linux's shmem layer, which - provides memory to back each object. When mapped into the GTT - or used in a command buffer, the backing pages for an object are - flushed to memory and marked write combined so as to be coherent - with the GPU. Likewise, if the CPU accesses an object after the GPU - has finished rendering to the object, then the object must be made - coherent with the CPU's view - of memory, usually involving GPU cache flushing of various kinds. - This core CPU<->GPU coherency management is provided by a - device-specific ioctl, which evaluates an object's current domain and - performs any necessary flushing or synchronization to put the object - into the desired coherency domain (note that the object may be busy, - i.e. an active render target; in that case, setting the domain - blocks the client and waits for rendering to complete before - performing any necessary flushing operations). - - - Perhaps the most important GEM function is providing a command - execution interface to clients. Client programs construct command - buffers containing references to previously allocated memory objects, - and then submit them to GEM. At that point, GEM takes care to bind - all the objects into the GTT, execute the buffer, and provide - necessary synchronization between clients accessing the same buffers. - This often involves evicting some objects from the GTT and re-binding - others (a fairly expensive operation), and providing relocation - support which hides fixed GTT offsets from clients. Clients must - take care not to submit command buffers that reference more objects - than can fit in the GTT; otherwise, GEM will reject them and no rendering - will occur. Similarly, if several objects in the buffer require - fence registers to be allocated for correct rendering (e.g. 2D blits - on pre-965 chips), care must be taken not to require more fence - registers than are available to the client. Such resource management - should be abstracted from the client in libdrm. + The read and poll + operations provide support for reading DRM events and polling them. They + are implemented by + + .poll = drm_poll, + .read = drm_read, + .fasync = drm_fasync, + .llseek = no_llseek, + + + + The memory mapping implementation varies depending on how the driver + manages memory. Pre-GEM drivers will use drm_mmap, + while GEM-aware drivers will use drm_gem_mmap. See + . + + .mmap = drm_gem_mmap, + + + + No other file operation is supported by the DRM API. + + + + IOCTLs + struct drm_ioctl_desc *ioctls; +int num_ioctls; + Driver-specific ioctls descriptors table. + + Driver-specific ioctls numbers start at DRM_COMMAND_BASE. The ioctls + descriptors table is indexed by the ioctl number offset from the base + value. Drivers can use the DRM_IOCTL_DEF_DRV() macro to initialize the + table entries. + + + DRM_IOCTL_DEF_DRV(ioctl, func, flags) + + ioctl is the ioctl name. Drivers must define + the DRM_##ioctl and DRM_IOCTL_##ioctl macros to the ioctl number + offset from DRM_COMMAND_BASE and the ioctl number respectively. The + first macro is private to the device while the second must be exposed + to userspace in a public header. + + + func is a pointer to the ioctl handler function + compatible with the drm_ioctl_t type. + typedef int drm_ioctl_t(struct drm_device *dev, void *data, + struct drm_file *file_priv); + + + flags is a bitmask combination of the following + values. It restricts how the ioctl is allowed to be called. + + + DRM_AUTH - Only authenticated callers allowed + + + DRM_MASTER - The ioctl can only be called on the master file + handle + + + DRM_ROOT_ONLY - Only callers with the SYSADMIN capability allowed + + + DRM_CONTROL_ALLOW - The ioctl can only be called on a control + device + + + DRM_UNLOCKED - The ioctl handler will be called without locking + the DRM global mutex + + + - - - - - - Output management - - At the core of the DRM output management code is a set of - structures representing CRTCs, encoders, and connectors. - - - A CRTC is an abstraction representing a part of the chip that - contains a pointer to a scanout buffer. Therefore, the number - of CRTCs available determines how many independent scanout - buffers can be active at any given time. The CRTC structure - contains several fields to support this: a pointer to some video - memory, a display mode, and an (x, y) offset into the video - memory to support panning or configurations where one piece of - video memory spans multiple CRTCs. - - - An encoder takes pixel data from a CRTC and converts it to a - format suitable for any attached connectors. On some devices, - it may be possible to have a CRTC send data to more than one - encoder. In that case, both encoders would receive data from - the same scanout buffer, resulting in a "cloned" display - configuration across the connectors attached to each encoder. - - - A connector is the final destination for pixel data on a device, - and usually connects directly to an external display device like - a monitor or laptop panel. A connector can only be attached to - one encoder at a time. The connector is also the structure - where information about the attached display is kept, so it - contains fields for display data, EDID data, DPMS & - connection status, and information about modes supported on the - attached displays. - - - - - - Framebuffer management - - Clients need to provide a framebuffer object which provides a source - of pixels for a CRTC to deliver to the encoder(s) and ultimately the - connector(s). A framebuffer is fundamentally a driver-specific memory - object, made into an opaque handle by the DRM's addfb() function. - Once a framebuffer has been created this way, it may be passed to the - KMS mode setting routines for use in a completed configuration. - @@ -812,15 +2355,24 @@ void intel_crt_init(struct drm_device *dev) + + - Suspend/resume + Suspend/Resume + + The DRM core provides some suspend/resume code, but drivers wanting full + suspend/resume support should provide save() and restore() functions. + These are called at suspend, hibernate, or resume time, and should perform + any state save or restore required by your device across suspend or + hibernate states. + + int (*suspend) (struct drm_device *, pm_message_t state); +int (*resume) (struct drm_device *); - The DRM core provides some suspend/resume code, but drivers - wanting full suspend/resume support should provide save() and - restore() functions. These are called at suspend, - hibernate, or resume time, and should perform any state save or - restore required by your device across suspend or hibernate - states. + Those are legacy suspend and resume methods. New driver should use the + power management interface provided by their bus type (usually through + the struct device_driver dev_pm_ops) and set + these methods to NULL. @@ -833,6 +2385,35 @@ void intel_crt_init(struct drm_device *dev) + + @@ -853,6 +2434,42 @@ void intel_crt_init(struct drm_device *dev) Cover generic ioctls and sysfs layout here. We only need high-level info, since man pages should cover the rest. + + + + + VBlank event handling + + The DRM core exposes two vertical blank related ioctls: + + + DRM_IOCTL_WAIT_VBLANK + + + This takes a struct drm_wait_vblank structure as its argument, + and it is used to block or request a signal when a specified + vblank event occurs. + + + + + DRM_IOCTL_MODESET_CTL + + + This should be called by application level drivers before and + after mode setting, since on many devices the vertical blank + counter is reset at that time. Internally, the DRM snapshots + the last vblank count when the ioctl is called with the + _DRM_PRE_MODESET command, so that the counter won't go backwards + (which is dealt with when _DRM_POST_MODESET is used). + + + + + + + + diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile index 362520992ced54497deb8dca8b6fa4a60bd61125..9b7e4c55792803b1c053bc99026860a5ce56e88d 100644 --- a/Documentation/DocBook/media/Makefile +++ b/Documentation/DocBook/media/Makefile @@ -300,7 +300,7 @@ $(MEDIA_OBJ_DIR)/media-entities.tmpl: $(MEDIA_OBJ_DIR)/v4l2.xml @( \ for ident in $(IOCTLS) ; do \ entity=`echo $$ident | tr _ -` ; \ - id=`grep "$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \ + id=`grep "$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml $(MEDIA_OBJ_DIR)/media-ioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \ echo "$$ident\">" \ >>$@ ; \ diff --git a/Documentation/DocBook/media/dvb/audio.xml b/Documentation/DocBook/media/dvb/audio.xml index d64386237207a9f27867fd6e9bee02620ff4c8bb..a7ea56c71a27cc5cebcfd6ea91b8d17dfa9432c4 100644 --- a/Documentation/DocBook/media/dvb/audio.xml +++ b/Documentation/DocBook/media/dvb/audio.xml @@ -1,12 +1,16 @@ DVB Audio Device The DVB audio device controls the MPEG2 audio decoder of the DVB hardware. It can be accessed through /dev/dvb/adapter0/audio0. Data types and and -ioctl definitions can be accessed by including linux/dvb/video.h in your +ioctl definitions can be accessed by including linux/dvb/audio.h in your application. Please note that some DVB cards don’t have their own MPEG decoder, which results in the omission of the audio and video device. + +These ioctls were also used by V4L2 to control MPEG decoders implemented in V4L2. The use +of these ioctls for that purpose has been made obsolete and proper V4L2 ioctls or controls +have been created to replace that functionality.
Audio Data Types @@ -558,6 +562,8 @@ role="subsection">AUDIO_SELECT_SOURCE role="subsection">AUDIO_SET_MUTE DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; with the V4L2_DEC_CMD_START_MUTE_AUDIO flag instead. This ioctl call asks the audio device to mute the stream that is currently being @@ -730,6 +736,8 @@ role="subsection">AUDIO_SET_BYPASS_MODE role="subsection">AUDIO_CHANNEL_SELECT DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK control instead. This ioctl call asks the Audio Device to select the requested channel if possible. @@ -772,6 +780,109 @@ role="subsection">AUDIO_CHANNEL_SELECT &return-value-dvb; +
AUDIO_BILINGUAL_CHANNEL_SELECT +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. It has been replaced by +the V4L2 V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK control +for MPEG decoders controlled through V4L2. + +This ioctl call asks the Audio Device to select the requested channel for bilingual streams if possible. + + +SYNOPSIS + + +int ioctl(int fd, int request = + AUDIO_BILINGUAL_CHANNEL_SELECT, audio_channel_select_t); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_BILINGUAL_CHANNEL_SELECT for this + command. + + +audio_channel_select_t +ch + +Select the output format of the audio (mono left/right, + stereo). + + + +&return-value-dvb; + +
AUDIO_GET_PTS +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. If you need this functionality, +then please contact the linux-media mailing list (&v4l-ml;). + +This ioctl call asks the Audio Device to return the current PTS timestamp. + + +SYNOPSIS + + +int ioctl(int fd, int request = + AUDIO_GET_PTS, __u64 *pts); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_GET_PTS for this + command. + + +__u64 *pts + + +Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / ISO/IEC 13818-1. + + +The PTS should belong to the currently played +frame if possible, but may also be a value close to it +like the PTS of the last decoded frame or the last PTS +extracted by the PES parser. + + +&return-value-dvb; +
AUDIO_GET_STATUS DESCRIPTION diff --git a/Documentation/DocBook/media/dvb/ca.xml b/Documentation/DocBook/media/dvb/ca.xml index 5c4adb44b1c18a4207ac993132e823c83cac6624..85eaf4fe2931fc96cea50ba2d502a401d475c22c 100644 --- a/Documentation/DocBook/media/dvb/ca.xml +++ b/Documentation/DocBook/media/dvb/ca.xml @@ -226,4 +226,357 @@ typedef struct ca_pid {
+ +
CA_RESET +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_RESET); + + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_RESET for this command. + + +&return-value-dvb; +
+ +
CA_GET_CAP +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_GET_CAP, + ca_caps_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_GET_CAP for this command. + + +ca_caps_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_GET_SLOT_INFO +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_GET_SLOT_INFO, + ca_slot_info_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_GET_SLOT_INFO for this command. + + +ca_slot_info_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_GET_DESCR_INFO +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_GET_DESCR_INFO, + ca_descr_info_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_GET_DESCR_INFO for this command. + + +ca_descr_info_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_GET_MSG +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_GET_MSG, + ca_msg_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_GET_MSG for this command. + + +ca_msg_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_SEND_MSG +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_SEND_MSG, + ca_msg_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_SEND_MSG for this command. + + +ca_msg_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_SET_DESCR +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_SET_DESCR, + ca_descr_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_SET_DESCR for this command. + + +ca_descr_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_SET_PID +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_SET_PID, + ca_pid_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_SET_PID for this command. + + +ca_pid_t * + + +Undocumented. + + +&return-value-dvb; +
+ diff --git a/Documentation/DocBook/media/dvb/demux.xml b/Documentation/DocBook/media/dvb/demux.xml index 37c17908aa400acd225881af1acb5383e6221442..86de89cfbd676cbeda054aba040432e25c4f68d3 100644 --- a/Documentation/DocBook/media/dvb/demux.xml +++ b/Documentation/DocBook/media/dvb/demux.xml @@ -899,4 +899,232 @@ typedef enum { Invalid stc number. - + + +
DMX_GET_PES_PIDS +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_GET_PES_PIDS, + __u16[5]); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_GET_PES_PIDS for this command. + + +__u16[5] + + +Undocumented. + + +&return-value-dvb; +
+ +
DMX_GET_CAPS +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_GET_CAPS, + dmx_caps_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_GET_CAPS for this command. + + +dmx_caps_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
DMX_SET_SOURCE +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_SET_SOURCE, + dmx_source_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_SET_SOURCE for this command. + + +dmx_source_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
DMX_ADD_PID +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_ADD_PID, + __u16 *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_ADD_PID for this command. + + +__u16 * + + +Undocumented. + + +&return-value-dvb; +
+ +
DMX_REMOVE_PID +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_REMOVE_PID, + __u16 *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_REMOVE_PID for this command. + + +__u16 * + + +Undocumented. + + +&return-value-dvb; +
+ + + diff --git a/Documentation/DocBook/media/dvb/dvbapi.xml b/Documentation/DocBook/media/dvb/dvbapi.xml index 2ab6ddcfc4e095dada4e2e6eb8084003096c279a..757488b24f4f2518898f13f55de57e9d708fa575 100644 --- a/Documentation/DocBook/media/dvb/dvbapi.xml +++ b/Documentation/DocBook/media/dvb/dvbapi.xml @@ -28,7 +28,7 @@ Convergence GmbH - 2009-2011 + 2009-2012 Mauro Carvalho Chehab @@ -84,7 +84,7 @@ Added ISDB-T test originally written by Patrick Boettcher LINUX DVB API -Version 5.2 +Version 5.8 &sub-intro; diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index e633c097a8d14b954975743e67816867f5b9fdaa..957e3acaae8e9c7e0cbc6ee377885c53d2b298d1 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -194,6 +194,7 @@ get/set up to 64 properties. The actual meaning of each property is described on APSK_16, APSK_32, DQPSK, + QAM_4_NR, } fe_modulation_t; @@ -265,6 +266,7 @@ typedef enum fe_code_rate { FEC_AUTO, FEC_3_5, FEC_9_10, + FEC_2_5, } fe_code_rate_t; which correspond to error correction rates of 1/2, 2/3, etc., @@ -351,7 +353,7 @@ typedef enum fe_delivery_system { SYS_ISDBC, SYS_ATSC, SYS_ATSCMH, - SYS_DMBTH, + SYS_DTMB, SYS_CMMB, SYS_DAB, SYS_DVBT2, @@ -567,28 +569,33 @@ typedef enum fe_delivery_system { <constant>DTV_ATSCMH_RS_FRAME_MODE</constant> RS frame mode. Possible values are: + typedef enum atscmh_rs_frame_mode { ATSCMH_RSFRAME_PRI_ONLY = 0, ATSCMH_RSFRAME_PRI_SEC = 1, } atscmh_rs_frame_mode_t; +
<constant>DTV_ATSCMH_RS_FRAME_ENSEMBLE</constant> RS frame ensemble. Possible values are: + typedef enum atscmh_rs_frame_ensemble { ATSCMH_RSFRAME_ENS_PRI = 0, ATSCMH_RSFRAME_ENS_SEC = 1, } atscmh_rs_frame_ensemble_t; +
<constant>DTV_ATSCMH_RS_CODE_MODE_PRI</constant> RS code mode (primary). Possible values are: + typedef enum atscmh_rs_code_mode { ATSCMH_RSCODE_211_187 = 0, @@ -596,6 +603,7 @@ typedef enum atscmh_rs_code_mode { ATSCMH_RSCODE_235_187 = 2, } atscmh_rs_code_mode_t; +
<constant>DTV_ATSCMH_RS_CODE_MODE_SEC</constant> @@ -613,23 +621,27 @@ typedef enum atscmh_rs_code_mode { <constant>DTV_ATSCMH_SCCC_BLOCK_MODE</constant> Series Concatenated Convolutional Code Block Mode. Possible values are: + typedef enum atscmh_sccc_block_mode { ATSCMH_SCCC_BLK_SEP = 0, ATSCMH_SCCC_BLK_COMB = 1, } atscmh_sccc_block_mode_t; +
<constant>DTV_ATSCMH_SCCC_CODE_MODE_A</constant> Series Concatenated Convolutional Code Rate. Possible values are: + typedef enum atscmh_sccc_code_mode { ATSCMH_SCCC_CODE_HLF = 0, ATSCMH_SCCC_CODE_QTR = 1, } atscmh_sccc_code_mode_t; +
<constant>DTV_ATSCMH_SCCC_CODE_MODE_B</constant> @@ -725,6 +737,9 @@ typedef enum fe_guard_interval { GUARD_INTERVAL_1_128, GUARD_INTERVAL_19_128, GUARD_INTERVAL_19_256, + GUARD_INTERVAL_PN420, + GUARD_INTERVAL_PN595, + GUARD_INTERVAL_PN945, } fe_guard_interval_t; @@ -733,6 +748,7 @@ typedef enum fe_guard_interval { try to find the correct guard interval (if capable) and will use TMCC to fill in the missing parameters. 2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at present + 3) DTMB specifies PN420, PN595 and PN945.
<constant>DTV_TRANSMISSION_MODE</constant> @@ -749,6 +765,8 @@ typedef enum fe_transmit_mode { TRANSMISSION_MODE_1K, TRANSMISSION_MODE_16K, TRANSMISSION_MODE_32K, + TRANSMISSION_MODE_C1, + TRANSMISSION_MODE_C3780, } fe_transmit_mode_t; Notes: @@ -760,6 +778,7 @@ typedef enum fe_transmit_mode { use TMCC to fill in the missing parameters. 3) DVB-T specifies 2K and 8K as valid sizes. 4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K. + 5) DTMB specifies C1 and C3780.
<constant>DTV_HIERARCHY</constant> @@ -774,17 +793,28 @@ typedef enum fe_hierarchy { } fe_hierarchy_t;
-
- <constant>DTV_ISDBS_TS_ID</constant> - Currently unused. +
+ <constant>DTV_STREAM_ID</constant> + DVB-S2, DVB-T2 and ISDB-S support the transmission of several + streams on a single transport stream. + This property enables the DVB driver to handle substream filtering, + when supported by the hardware. + By default, substream filtering is disabled. + + For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255. + + For ISDB, the valid substream id range is from 1 to 65535. + + To disable it, you should use the special macro NO_STREAM_ID_FILTER. + + Note: any value outside the id range also disables filtering. +
-
- <constant>DTV_DVBT2_PLP_ID</constant> - DVB-T2 supports Physical Layer Pipes (PLP) to allow transmission of - many data types via a single multiplex. The API will soon support this - at which point this section will be expanded. +
+ <constant>DTV_DVBT2_PLP_ID_LEGACY</constant> + Obsolete, replaced with DTV_STREAM_ID.
-
+
<constant>DTV_ENUM_DELSYS</constant> A Multi standard frontend needs to advertise the delivery systems provided. Applications need to enumerate the provided delivery systems, before using @@ -796,6 +826,29 @@ typedef enum fe_hierarchy { FE_GET_INFO. In the case of a legacy frontend, the result is just the same as with FE_GET_INFO, but in a more structured format
+
+ <constant>DTV_INTERLEAVING</constant> + Interleaving mode + +enum fe_interleaving { + INTERLEAVING_NONE, + INTERLEAVING_AUTO, + INTERLEAVING_240, + INTERLEAVING_720, +}; + +
+
+ <constant>DTV_LNA</constant> + Low-noise amplifier. + Hardware might offer controllable LNA which can be set manually + using that parameter. Usually LNA could be found only from + terrestrial devices if at all. + Possible values: 0, 1, LNA_AUTO + 0, LNA off + 1, LNA on + use the special macro LNA_AUTO to set LNA auto +
Properties used on terrestrial delivery systems @@ -816,6 +869,7 @@ typedef enum fe_hierarchy { DTV_GUARD_INTERVAL DTV_TRANSMISSION_MODE DTV_HIERARCHY + DTV_LNA
@@ -838,7 +892,8 @@ typedef enum fe_hierarchy { DTV_GUARD_INTERVAL DTV_TRANSMISSION_MODE DTV_HIERARCHY - DTV_DVBT2_PLP_ID + DTV_STREAM_ID + DTV_LNA
@@ -925,13 +980,32 @@ typedef enum fe_hierarchy { DTV_ATSCMH_PRC DTV_ATSCMH_RS_FRAME_MODE DTV_ATSCMH_RS_FRAME_ENSEMBLE - DTV_ATSCMH_CODE_MODE_PRI - DTV_ATSCMH_CODE_MODE_SEC + DTV_ATSCMH_RS_CODE_MODE_PRI + DTV_ATSCMH_RS_CODE_MODE_SEC DTV_ATSCMH_SCCC_BLOCK_MODE - DTV_ATSCMH_SCCC_CODE_MODE_A - DTV_ATSCMH_SCCC_CODE_MODE_B - DTV_ATSCMH_SCCC_CODE_MODE_C - DTV_ATSCMH_SCCC_CODE_MODE_D + DTV_ATSCMH_SCCC_CODE_MODE_A + DTV_ATSCMH_SCCC_CODE_MODE_B + DTV_ATSCMH_SCCC_CODE_MODE_C + DTV_ATSCMH_SCCC_CODE_MODE_D + +
+
+ DTMB delivery system + The following parameters are valid for DTMB: + + DTV_API_VERSION + DTV_DELIVERY_SYSTEM + DTV_TUNE + DTV_CLEAR + DTV_FREQUENCY + DTV_MODULATION + DTV_BANDWIDTH_HZ + DTV_INVERSION + DTV_INNER_FEC + DTV_GUARD_INTERVAL + DTV_TRANSMISSION_MODE + DTV_INTERLEAVING + DTV_LNA
@@ -952,6 +1026,7 @@ typedef enum fe_hierarchy { DTV_INVERSION DTV_SYMBOL_RATE DTV_INNER_FEC + DTV_LNA
@@ -966,6 +1041,7 @@ typedef enum fe_hierarchy { DTV_FREQUENCY DTV_MODULATION DTV_INVERSION + DTV_LNA
@@ -999,6 +1075,7 @@ typedef enum fe_hierarchy { DTV_MODULATION DTV_PILOT DTV_ROLLOFF + DTV_STREAM_ID
@@ -1021,7 +1098,7 @@ typedef enum fe_hierarchy { DTV_SYMBOL_RATE DTV_INNER_FEC DTV_VOLTAGE - DTV_ISDBS_TS_ID + DTV_STREAM_ID
diff --git a/Documentation/DocBook/media/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml index aeaed59d0f1f5d3d9baeff4af53eb803a7b50355..426c2526a4546a5fcf8ec27561d14482fa91593e 100644 --- a/Documentation/DocBook/media/dvb/frontend.xml +++ b/Documentation/DocBook/media/dvb/frontend.xml @@ -66,7 +66,7 @@ supported via the new FE_GET_PROPERTY/FE_GET The usage of this field is deprecated, as it doesn't report all supported standards, and will provide an incomplete information for frontends that support multiple delivery systems. -Please use DTV_ENUM_DELSYS instead. +Please use DTV_ENUM_DELSYS instead.
@@ -101,6 +101,7 @@ a specific frontend type. FE_CAN_8VSB = 0x200000, FE_CAN_16VSB = 0x400000, FE_HAS_EXTENDED_CAPS = 0x800000, + FE_CAN_MULTISTREAM = 0x4000000, FE_CAN_TURBO_FEC = 0x8000000, FE_CAN_2G_MODULATION = 0x10000000, FE_NEEDS_BENDING = 0x20000000, @@ -207,18 +208,44 @@ spec. Several functions of the frontend device use the fe_status data type defined by - typedef enum fe_status { - FE_HAS_SIGNAL = 0x01, /⋆ found something above the noise level ⋆/ - FE_HAS_CARRIER = 0x02, /⋆ found a DVB signal ⋆/ - FE_HAS_VITERBI = 0x04, /⋆ FEC is stable ⋆/ - FE_HAS_SYNC = 0x08, /⋆ found sync bytes ⋆/ - FE_HAS_LOCK = 0x10, /⋆ everything's working... ⋆/ - FE_TIMEDOUT = 0x20, /⋆ no lock within the last ~2 seconds ⋆/ - FE_REINIT = 0x40 /⋆ frontend was reinitialized, ⋆/ - } fe_status_t; /⋆ application is recommned to reset ⋆/ +typedef enum fe_status { + FE_HAS_SIGNAL = 0x01, + FE_HAS_CARRIER = 0x02, + FE_HAS_VITERBI = 0x04, + FE_HAS_SYNC = 0x08, + FE_HAS_LOCK = 0x10, + FE_TIMEDOUT = 0x20, + FE_REINIT = 0x40, +} fe_status_t; -to indicate the current state and/or state changes of the frontend hardware. - +to indicate the current state and/or state changes of the frontend hardware: + + + + +FE_HAS_SIGNAL +The frontend has found something above the noise level + +FE_HAS_CARRIER +The frontend has found a DVB signal + +FE_HAS_VITERBI +The frontend FEC code is stable + +FE_HAS_SYNC +Syncronization bytes was found + +FE_HAS_LOCK +The DVB were locked and everything is working + +FE_TIMEDOUT +no lock within the last about 2 seconds + +FE_REINIT +The frontend was reinitialized, application is +recommended to reset DiSEqC, tone and parameters + +
@@ -238,7 +265,7 @@ and to add newer delivery systems. FE_GET_PROPERTY/FE_SET_PROPERTY instead, in order to be able to support the newer System Delivery like DVB-S2, DVB-T2, DVB-C2, ISDB, etc. -All kinds of parameters are combined as an union in the FrontendParameters structure: +All kinds of parameters are combined as an union in the FrontendParameters structure: struct dvb_frontend_parameters { uint32_t frequency; /⋆ (absolute) frequency in Hz for QAM/OFDM ⋆/ @@ -251,12 +278,13 @@ struct dvb_frontend_parameters { struct dvb_vsb_parameters vsb; } u; }; - + In the case of QPSK frontends the frequency field specifies the intermediate frequency, i.e. the offset which is effectively added to the local oscillator frequency (LOF) of the LNB. The intermediate frequency has to be specified in units of kHz. For QAM and OFDM frontends the frequency specifies the absolute frequency and is given in Hz. +
QPSK parameters For satellite QPSK frontends you have to use the dvb_qpsk_parameters structure: @@ -321,8 +349,8 @@ itself.
frontend code rate The possible values for the fec_inner field used on -struct dvb_qpsk_parameters and -struct dvb_qam_parameters are: +struct dvb_qpsk_parameters and +struct dvb_qam_parameters are: typedef enum fe_code_rate { @@ -347,9 +375,9 @@ detection.
frontend modulation type for QAM, OFDM and VSB For cable and terrestrial frontends, e. g. for -struct dvb_qpsk_parameters, -struct dvb_qam_parameters and -struct dvb_qam_parameters, +struct dvb_qpsk_parameters, +struct dvb_qam_parameters and +struct dvb_qam_parameters, it needs to specify the quadrature modulation mode which can be one of the following: @@ -370,8 +398,8 @@ it needs to specify the quadrature modulation mode which can be one of the follo } fe_modulation_t;
-Finally, there are several more parameters for OFDM: - +
+More OFDM parameters
Number of carriers per channel @@ -427,6 +455,7 @@ typedef enum fe_hierarchy { } fe_hierarchy_t;
+
diff --git a/Documentation/DocBook/media/dvb/intro.xml b/Documentation/DocBook/media/dvb/intro.xml index 170064a3dc8f4b3db90bb348331ec777074f84c2..2048b53d19b9e81b2a7e159dbde0ce63c1b51f98 100644 --- a/Documentation/DocBook/media/dvb/intro.xml +++ b/Documentation/DocBook/media/dvb/intro.xml @@ -205,7 +205,7 @@ a partial path like: additional include file linux/dvb/version.h exists, which defines the constant DVB_API_VERSION. This document -describes DVB_API_VERSION 5.4. +describes DVB_API_VERSION 5.8.
diff --git a/Documentation/DocBook/media/dvb/kdapi.xml b/Documentation/DocBook/media/dvb/kdapi.xml index 6c67481eaa4b8f20292d5ab9d2cdcdc4398d9f3f..6c11ec52cbeef013839fc3bf8a27c0029c56427a 100644 --- a/Documentation/DocBook/media/dvb/kdapi.xml +++ b/Documentation/DocBook/media/dvb/kdapi.xml @@ -2,7 +2,7 @@ The kernel demux API defines a driver-internal interface for registering low-level, hardware specific driver to a hardware independent demux layer. It is only of interest for DVB device driver writers. The header file for this API is named demux.h and located in -drivers/media/dvb/dvb-core. +drivers/media/dvb-core. Maintainer note: This section must be reviewed. It is probably out of date. diff --git a/Documentation/DocBook/media/dvb/net.xml b/Documentation/DocBook/media/dvb/net.xml index 67d37e5ce5979c1a8ffb160bc0993b7f264fc8ec..a193e86941b55eb85ab45beb6850c90560d7c0a7 100644 --- a/Documentation/DocBook/media/dvb/net.xml +++ b/Documentation/DocBook/media/dvb/net.xml @@ -26,4 +26,131 @@ struct dvb_net_if { DVB net Function Calls To be written… + +
NET_ADD_IF +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = NET_ADD_IF, + struct dvb_net_if *if); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals NET_ADD_IF for this command. + + +struct dvb_net_if *if + + +Undocumented. + + +&return-value-dvb; +
+ +
NET_REMOVE_IF +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = NET_REMOVE_IF); + + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals NET_REMOVE_IF for this command. + + +&return-value-dvb; +
+ +
NET_GET_IF +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = NET_GET_IF, + struct dvb_net_if *if); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals NET_GET_IF for this command. + + +struct dvb_net_if *if + + +Undocumented. + + +&return-value-dvb; +
diff --git a/Documentation/DocBook/media/dvb/video.xml b/Documentation/DocBook/media/dvb/video.xml index 25fb823226b42231f7333212c8256fd8d44a888b..3ea1ca7e785ef2b271c848442a54177b86b0245d 100644 --- a/Documentation/DocBook/media/dvb/video.xml +++ b/Documentation/DocBook/media/dvb/video.xml @@ -15,6 +15,10 @@ the audio and video device as well as the video4linux device. The ioctls that deal with SPUs (sub picture units) and navigation packets are only supported on some MPEG decoders made for DVD playback. + +These ioctls were also used by V4L2 to control MPEG decoders implemented in V4L2. The use +of these ioctls for that purpose has been made obsolete and proper V4L2 ioctls or controls +have been created to replace that functionality.
Video Data Types @@ -55,7 +59,7 @@ typedef enum {
-video stream source +video_stream_source_t The video stream source is set through the VIDEO_SELECT_SOURCE call and can take the following values, depending on whether we are replaying from an internal (demuxer) or external (user write) source. @@ -76,7 +80,7 @@ call.
-video play state +video_play_state_t The following values can be returned by the VIDEO_GET_STATUS call representing the state of video playback. @@ -90,9 +94,9 @@ typedef enum {
+struct video_command The structure must be zeroed before use by the application This ensures it can be extended safely in the future. -struct video-command struct video_command { __u32 cmd; @@ -121,7 +125,7 @@ struct video_command {
-struct video_size-t +video_size_t typedef struct { int w; @@ -217,7 +221,7 @@ bits set according to the hardwares capabilities.
-video system +video_system_t A call to VIDEO_SET_SYSTEM sets the desired video system for TV output. The following system types can be set: @@ -263,7 +267,7 @@ call expects the following format for that information:
-video SPU +struct video_spu Calling VIDEO_SET_SPU deactivates or activates SPU decoding, according to the following format: @@ -277,12 +281,12 @@ following format:
-video SPU palette +struct video_spu_palette The following structure is used to set the SPU palette by calling VIDEO_SPU_PALETTE: typedef - struct video_spu_palette{ + struct video_spu_palette { int length; uint8_t ⋆palette; } video_spu_palette_t; @@ -290,13 +294,13 @@ following format:
-video NAVI pack +struct video_navi_pack In order to get the navigational data the following structure has to be passed to the ioctl VIDEO_GET_NAVI: typedef - struct video_navi_pack{ + struct video_navi_pack { int length; /⋆ 0 ... 1024 ⋆/ uint8_t data[1024]; } video_navi_pack_t; @@ -305,7 +309,7 @@ VIDEO_GET_NAVI:
-video attributes +video_attributes_t The following attributes can be set by a call to VIDEO_SET_ATTRIBUTES: @@ -541,6 +545,8 @@ VIDEO_GET_NAVI: role="subsection">VIDEO_STOP DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; instead. This ioctl call asks the Video Device to stop playing the current stream. @@ -598,6 +604,8 @@ role="subsection">VIDEO_STOP role="subsection">VIDEO_PLAY DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; instead. This ioctl call asks the Video Device to start playing a video stream from the @@ -634,6 +642,8 @@ role="subsection">VIDEO_PLAY role="subsection">VIDEO_FREEZE DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; instead. This ioctl call suspends the live video stream being played. Decoding @@ -674,6 +684,8 @@ role="subsection">VIDEO_FREEZE role="subsection">VIDEO_CONTINUE DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; instead. This ioctl call restarts decoding and playing processes of the video stream @@ -710,6 +722,9 @@ role="subsection">VIDEO_CONTINUE role="subsection">VIDEO_SELECT_SOURCE DESCRIPTION +This ioctl is for DVB devices only. This ioctl was also supported by the +V4L2 ivtv driver, but that has been replaced by the ivtv-specific +IVTV_IOC_PASSTHROUGH_MODE ioctl. This ioctl call informs the video device which source shall be used for the input @@ -845,10 +860,160 @@ role="subsection">VIDEO_GET_STATUS &return-value-dvb; +
VIDEO_GET_FRAME_COUNT +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this +ioctl has been replaced by the V4L2_CID_MPEG_VIDEO_DEC_FRAME control. + +This ioctl call asks the Video Device to return the number of displayed frames +since the decoder was started. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_GET_FRAME_COUNT, __u64 *pts); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_FRAME_COUNT for this + command. + + +__u64 *pts + + +Returns the number of frames displayed since the decoder was started. + + + +&return-value-dvb; + +
VIDEO_GET_PTS +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this +ioctl has been replaced by the V4L2_CID_MPEG_VIDEO_DEC_PTS control. + +This ioctl call asks the Video Device to return the current PTS timestamp. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_GET_PTS, __u64 *pts); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_PTS for this + command. + + +__u64 *pts + + +Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / ISO/IEC 13818-1. + + +The PTS should belong to the currently played +frame if possible, but may also be a value close to it +like the PTS of the last decoded frame or the last PTS +extracted by the PES parser. + + +&return-value-dvb; + +
VIDEO_GET_FRAME_RATE +DESCRIPTION + + +This ioctl call asks the Video Device to return the current framerate. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_GET_FRAME_RATE, unsigned int *rate); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_FRAME_RATE for this + command. + + +unsigned int *rate + + +Returns the framerate in number of frames per 1000 seconds. + + + +&return-value-dvb; +
VIDEO_GET_EVENT DESCRIPTION +This ioctl is for DVB devices only. To get events from a V4L2 decoder use the V4L2 +&VIDIOC-DQEVENT; ioctl instead. This ioctl call returns an event of type video_event if available. If an event is @@ -914,6 +1079,152 @@ role="subsection">VIDEO_GET_EVENT +
VIDEO_COMMAND +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this +ioctl has been replaced by the &VIDIOC-DECODER-CMD; ioctl. + +This ioctl commands the decoder. The video_command struct +is a subset of the v4l2_decoder_cmd struct, so refer to the +&VIDIOC-DECODER-CMD; documentation for more information. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_COMMAND, struct video_command *cmd); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_COMMAND for this + command. + + +struct video_command *cmd + + +Commands the decoder. + + + +&return-value-dvb; + +
VIDEO_TRY_COMMAND +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this +ioctl has been replaced by the &VIDIOC-TRY-DECODER-CMD; ioctl. + +This ioctl tries a decoder command. The video_command struct +is a subset of the v4l2_decoder_cmd struct, so refer to the +&VIDIOC-TRY-DECODER-CMD; documentation for more information. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_TRY_COMMAND, struct video_command *cmd); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_TRY_COMMAND for this + command. + + +struct video_command *cmd + + +Try a decoder command. + + + +&return-value-dvb; + +
VIDEO_GET_SIZE +DESCRIPTION + + +This ioctl returns the size and aspect ratio. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_GET_SIZE, video_size_t *size); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_SIZE for this + command. + + +video_size_t *size + + +Returns the size and aspect ratio. + + + +&return-value-dvb; +
VIDEO_SET_DISPLAY_FORMAT DESCRIPTION diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml index 1078e45f189f0630c6c6ea50f74b3764dc1cea43..d2eb79e41a011a6e904ba5f81da083cec8e3b520 100644 --- a/Documentation/DocBook/media/v4l/biblio.xml +++ b/Documentation/DocBook/media/v4l/biblio.xml @@ -178,23 +178,23 @@ Signal - NTSC for Studio Applications" 1125-Line High-Definition Production" - - EN 50067 + + IEC 62106 - European Committee for Electrotechnical Standardization -(http://www.cenelec.eu) + International Electrotechnical Commission +(http://www.iec.ch) Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz - NRSC-4 + NRSC-4-B National Radio Systems Committee (http://www.nrscstandards.org) - NRSC-4: United States RBDS Standard + NRSC-4-B: United States RBDS Standard @@ -226,4 +226,44 @@ in the frequency range from 87,5 to 108,0 MHz VESA and Industry Standards and Guidelines for Computer Display Monitor Timing (DMT) + + EDID + + Video Electronics Standards Association +(http://www.vesa.org) + + VESA Enhanced Extended Display Identification Data Standard + Release A, Revision 2 + + + + HDCP + + Digital Content Protection LLC +(http://www.digital-cp.com) + + High-bandwidth Digital Content Protection System + Revision 1.3 + + + + HDMI + + HDMI Licensing LLC +(http://www.hdmi.org) + + High-Definition Multimedia Interface + Specification Version 1.4a + + + + DP + + Video Electronics Standards Association +(http://www.vesa.org) + + VESA DisplayPort Standard + Version 1, Revision 2 + + diff --git a/Documentation/DocBook/media/v4l/common.xml b/Documentation/DocBook/media/v4l/common.xml index b91d25313b631eb25fec06bf42877131af31c61e..73c6847436c99f7c7ca5fccc3f6b1c2780881afd 100644 --- a/Documentation/DocBook/media/v4l/common.xml +++ b/Documentation/DocBook/media/v4l/common.xml @@ -564,7 +564,7 @@ automatically. To query and select the standard used by the current video input or output applications call the &VIDIOC-G-STD; and &VIDIOC-S-STD; ioctl, respectively. The received -standard can be sensed with the &VIDIOC-QUERYSTD; ioctl. Note parameter of all these ioctls is a pointer to a &v4l2-std-id; type (a standard set), not an index into the standard enumeration. +standard can be sensed with the &VIDIOC-QUERYSTD; ioctl. Note that the parameter of all these ioctls is a pointer to a &v4l2-std-id; type (a standard set), not an index into the standard enumeration. An alternative to the current scheme is to use pointers to indices as arguments of VIDIOC_G_STD and VIDIOC_S_STD, the &v4l2-input; and @@ -588,30 +588,28 @@ switch to a standard by &v4l2-std-id;. Drivers must implement all video standard ioctls when the device has one or more video inputs or outputs. - Special rules apply to USB cameras where the notion of video -standards makes little sense. More generally any capture device, -output devices accordingly, which is + Special rules apply to devices such as USB cameras where the notion of video +standards makes little sense. More generally for any capture or output device +which is: incapable of capturing fields or frames at the nominal rate of the video standard, or - where timestamps refer -to the instant the field or frame was received by the driver, not the -capture time, or - - - where sequence numbers -refer to the frames received by the driver, not the captured -frames. + that does not support the video standard formats at all. Here the driver shall set the std field of &v4l2-input; and &v4l2-output; -to zero, the VIDIOC_G_STD, +to zero and the VIDIOC_G_STD, VIDIOC_S_STD, VIDIOC_QUERYSTD and VIDIOC_ENUMSTD ioctls shall return the -&EINVAL;. +&ENOTTY;. + See for a rationale. + Applications can make use of the and + flags to determine whether the video standard ioctls +are available for the device. +&ENOTTY;. See for a rationale. Probably even USB cameras follow some well known video standard. It might have been better to explicitly indicate elsewhere if a device cannot live @@ -626,9 +624,9 @@ up to normal expectations, instead of this exception. &v4l2-standard; standard; if (-1 == ioctl (fd, &VIDIOC-G-STD;, &std_id)) { - /* Note when VIDIOC_ENUMSTD always returns EINVAL this + /* Note when VIDIOC_ENUMSTD always returns ENOTTY this is no video device or it falls under the USB exception, - and VIDIOC_G_STD returning EINVAL is no error. */ + and VIDIOC_G_STD returning ENOTTY is no error. */ perror ("VIDIOC_G_STD"); exit (EXIT_FAILURE); diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index faa0fd14666a54bc2688ca176c9dee531cc5eccf..c6ae4c9d0e0c6f0ae6f9661f916bb73e3d7fc89f 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -1476,7 +1476,7 @@ follows. V4L2_BUF_TYPE_PRIVATE_BASE - V4L2_BUF_TYPE_PRIVATE + V4L2_BUF_TYPE_PRIVATE (but this is deprecated) @@ -2468,21 +2468,9 @@ that used it. It was originally scheduled for removal in 2.6.35. reserved2 and removed V4L2_BUF_FLAG_INPUT. - -
- -
- V4L2 in Linux 3.6 - Added V4L2_CAP_VIDEO_M2M and V4L2_CAP_VIDEO_M2M_MPLANE capabilities. - -
- -
- V4L2 in Linux 3.6 - Added support for frequency band enumerations: &VIDIOC-ENUM-FREQ-BANDS;. @@ -2567,29 +2555,6 @@ and may change in the future. Video Output Overlay (OSD) Interface, . - - V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY, - &v4l2-buf-type;, . - - - V4L2_CAP_VIDEO_OUTPUT_OVERLAY, -&VIDIOC-QUERYCAP; ioctl, . - - - &VIDIOC-ENUM-FRAMESIZES; and -&VIDIOC-ENUM-FRAMEINTERVALS; ioctls. - - - &VIDIOC-G-ENC-INDEX; ioctl. - - - &VIDIOC-ENCODER-CMD; and &VIDIOC-TRY-ENCODER-CMD; -ioctls. - - - &VIDIOC-DECODER-CMD; and &VIDIOC-TRY-DECODER-CMD; -ioctls. - &VIDIOC-DBG-G-REGISTER; and &VIDIOC-DBG-S-REGISTER; ioctls. @@ -2614,10 +2579,6 @@ ioctls. Sub-device selection API: &VIDIOC-SUBDEV-G-SELECTION; and &VIDIOC-SUBDEV-S-SELECTION; ioctls. - - - V4L2_CID_AUTO_FOCUS_AREA control. - Support for frequency band enumeration: &VIDIOC-ENUM-FREQ-BANDS; ioctl. diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index b0964fb4e8348853619efd3296b7821d4e6b6803..272a5f71850934e23a3c6e7ca7b5d8cc60b9784c 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -3505,7 +3505,7 @@ This encodes up to 31 pre-defined programme types. Sets the Programme Service name (PS_NAME) for transmission. It is intended for static display on a receiver. It is the primary aid to listeners in programme service -identification and selection. In Annex E of , the RDS specification, +identification and selection. In Annex E of , the RDS specification, there is a full description of the correct character encoding for Programme Service name strings. Also from RDS specification, PS is usually a single eight character text. However, it is also possible to find receivers which can scroll strings sized as 8 x N characters. So, this control must be configured @@ -3519,7 +3519,7 @@ with steps of 8 characters. The result is it must always contain a string with s what is being broadcasted. RDS Radio Text can be applied when broadcaster wishes to transmit longer PS names, programme-related information or any other text. In these cases, RadioText should be used in addition to V4L2_CID_RDS_TX_PS_NAME. The encoding for Radio Text strings is also fully described -in Annex E of . The length of Radio Text strings depends on which RDS Block is being +in Annex E of . The length of Radio Text strings depends on which RDS Block is being used to transmit it, either 32 (2A block) or 64 (2B block). However, it is also possible to find receivers which can scroll strings sized as 32 x N or 64 x N characters. So, this control must be configured with steps of 32 or 64 characters. The result is it must always contain a string with size multiple of 32 or 64. @@ -3650,7 +3650,7 @@ manually or automatically if set to zero. Unit, range and step are driver-specif For more details about RDS specification, refer to - document, from CENELEC. + document, from CENELEC.
@@ -3717,232 +3717,231 @@ interface and may change in the future. use case involving camera or individually. -
+ + Flash Control IDs + + + + + + + + + + + ID + Type + Description + + + + + + V4L2_CID_FLASH_CLASS + class + + + The FLASH class descriptor. + + + V4L2_CID_FLASH_LED_MODE + menu + + + Defines the mode of the flash LED, + the high-power white LED attached to the flash controller. + Setting this control may not be possible in presence of + some faults. See V4L2_CID_FLASH_FAULT. + + + + + + V4L2_FLASH_LED_MODE_NONE + Off. + + + V4L2_FLASH_LED_MODE_FLASH + Flash mode. + + + V4L2_FLASH_LED_MODE_TORCH + Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY. + + + + + + V4L2_CID_FLASH_STROBE_SOURCE + menu + + Defines the source of the flash LED + strobe. + + + + + + V4L2_FLASH_STROBE_SOURCE_SOFTWARE + The flash strobe is triggered by using + the V4L2_CID_FLASH_STROBE control. + + + V4L2_FLASH_STROBE_SOURCE_EXTERNAL + The flash strobe is triggered by an + external source. Typically this is a sensor, + which makes it possible to synchronises the + flash strobe start to exposure start. + + + + + + V4L2_CID_FLASH_STROBE + button + + + Strobe flash. Valid when + V4L2_CID_FLASH_LED_MODE is set to + V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE + is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this + control may not be possible in presence of some faults. + See V4L2_CID_FLASH_FAULT. + + + V4L2_CID_FLASH_STROBE_STOP + button + + Stop flash strobe immediately. + + + V4L2_CID_FLASH_STROBE_STATUS + boolean + + + Strobe status: whether the flash + is strobing at the moment or not. This is a read-only + control. + + + V4L2_CID_FLASH_TIMEOUT + integer + + + Hardware timeout for flash. The + flash strobe is stopped after this period of time has + passed from the start of the strobe. + + + V4L2_CID_FLASH_INTENSITY + integer + + + Intensity of the flash strobe when + the flash LED is in flash mode + (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps + (mA) if possible. + + + V4L2_CID_FLASH_TORCH_INTENSITY + integer + + + Intensity of the flash LED in + torch mode (V4L2_FLASH_LED_MODE_TORCH). The unit should be + milliamps (mA) if possible. Setting this control may not + be possible in presence of some faults. See + V4L2_CID_FLASH_FAULT. + + + V4L2_CID_FLASH_INDICATOR_INTENSITY + integer + + + Intensity of the indicator LED. + The indicator LED may be fully independent of the flash + LED. The unit should be microamps (uA) if possible. + + + V4L2_CID_FLASH_FAULT + bitmask + + + Faults related to the flash. The + faults tell about specific problems in the flash chip + itself or the LEDs attached to it. Faults may prevent + further use of some of the flash controls. In particular, + V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE + if the fault affects the flash LED. Exactly which faults + have such an effect is chip dependent. Reading the faults + resets the control and returns the chip to a usable state + if possible. + + + + + + V4L2_FLASH_FAULT_OVER_VOLTAGE + Flash controller voltage to the flash LED + has exceeded the limit specific to the flash + controller. + + + V4L2_FLASH_FAULT_TIMEOUT + The flash strobe was still on when + the timeout set by the user --- + V4L2_CID_FLASH_TIMEOUT control --- has expired. + Not all flash controllers may set this in all + such conditions. + + + V4L2_FLASH_FAULT_OVER_TEMPERATURE + The flash controller has overheated. + + + V4L2_FLASH_FAULT_SHORT_CIRCUIT + The short circuit protection of the flash + controller has been triggered. + + + V4L2_FLASH_FAULT_OVER_CURRENT + Current in the LED power supply has exceeded the limit + specific to the flash controller. + + + V4L2_FLASH_FAULT_INDICATOR + The flash controller has detected a short or open + circuit condition on the indicator LED. + + + + + + V4L2_CID_FLASH_CHARGE + boolean + + Enable or disable charging of the xenon + flash capacitor. + + + V4L2_CID_FLASH_READY + boolean + + + Is the flash ready to strobe? + Xenon flashes require their capacitors charged before + strobing. LED flashes often require a cooldown period + after strobe during which another strobe will not be + possible. This is a read-only control. + + + + +
+
- - - Flash Control IDs - - - - - - - - - - - ID - Type - Description - - - - - - V4L2_CID_FLASH_CLASS - class - - - The FLASH class descriptor. - - - V4L2_CID_FLASH_LED_MODE - menu - - - Defines the mode of the flash LED, - the high-power white LED attached to the flash controller. - Setting this control may not be possible in presence of - some faults. See V4L2_CID_FLASH_FAULT. - - - - - - V4L2_FLASH_LED_MODE_NONE - Off. - - - V4L2_FLASH_LED_MODE_FLASH - Flash mode. - - - V4L2_FLASH_LED_MODE_TORCH - Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY. - - - - - - V4L2_CID_FLASH_STROBE_SOURCE - menu - - Defines the source of the flash LED - strobe. - - - - - - V4L2_FLASH_STROBE_SOURCE_SOFTWARE - The flash strobe is triggered by using - the V4L2_CID_FLASH_STROBE control. - - - V4L2_FLASH_STROBE_SOURCE_EXTERNAL - The flash strobe is triggered by an - external source. Typically this is a sensor, - which makes it possible to synchronises the - flash strobe start to exposure start. - - - - - - V4L2_CID_FLASH_STROBE - button - - - Strobe flash. Valid when - V4L2_CID_FLASH_LED_MODE is set to - V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE - is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this - control may not be possible in presence of some faults. - See V4L2_CID_FLASH_FAULT. - - - V4L2_CID_FLASH_STROBE_STOP - button - - Stop flash strobe immediately. - - - V4L2_CID_FLASH_STROBE_STATUS - boolean - - - Strobe status: whether the flash - is strobing at the moment or not. This is a read-only - control. - - - V4L2_CID_FLASH_TIMEOUT - integer - - - Hardware timeout for flash. The - flash strobe is stopped after this period of time has - passed from the start of the strobe. - - - V4L2_CID_FLASH_INTENSITY - integer - - - Intensity of the flash strobe when - the flash LED is in flash mode - (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps - (mA) if possible. - - - V4L2_CID_FLASH_TORCH_INTENSITY - integer - - - Intensity of the flash LED in - torch mode (V4L2_FLASH_LED_MODE_TORCH). The unit should be - milliamps (mA) if possible. Setting this control may not - be possible in presence of some faults. See - V4L2_CID_FLASH_FAULT. - - - V4L2_CID_FLASH_INDICATOR_INTENSITY - integer - - - Intensity of the indicator LED. - The indicator LED may be fully independent of the flash - LED. The unit should be microamps (uA) if possible. - - - V4L2_CID_FLASH_FAULT - bitmask - - - Faults related to the flash. The - faults tell about specific problems in the flash chip - itself or the LEDs attached to it. Faults may prevent - further use of some of the flash controls. In particular, - V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE - if the fault affects the flash LED. Exactly which faults - have such an effect is chip dependent. Reading the faults - resets the control and returns the chip to a usable state - if possible. - - - - - - V4L2_FLASH_FAULT_OVER_VOLTAGE - Flash controller voltage to the flash LED - has exceeded the limit specific to the flash - controller. - - - V4L2_FLASH_FAULT_TIMEOUT - The flash strobe was still on when - the timeout set by the user --- - V4L2_CID_FLASH_TIMEOUT control --- has expired. - Not all flash controllers may set this in all - such conditions. - - - V4L2_FLASH_FAULT_OVER_TEMPERATURE - The flash controller has overheated. - - - V4L2_FLASH_FAULT_SHORT_CIRCUIT - The short circuit protection of the flash - controller has been triggered. - - - V4L2_FLASH_FAULT_OVER_CURRENT - Current in the LED power supply has exceeded the limit - specific to the flash controller. - - - V4L2_FLASH_FAULT_INDICATOR - The flash controller has detected a short or open - circuit condition on the indicator LED. - - - - - - V4L2_CID_FLASH_CHARGE - boolean - - Enable or disable charging of the xenon - flash capacitor. - - - V4L2_CID_FLASH_READY - boolean - - - Is the flash ready to strobe? - Xenon flashes require their capacitors charged before - strobing. LED flashes often require a cooldown period - after strobe during which another strobe will not be - possible. This is a read-only control. - - - - -
@@ -4274,4 +4273,165 @@ interface and may change in the future.
+ +
+ Digital Video Control Reference + + + Experimental + + This is an experimental interface and may + change in the future. + + + + The Digital Video control class is intended to control receivers + and transmitters for VGA, + DVI + (Digital Visual Interface), HDMI () and DisplayPort (). + These controls are generally expected to be private to the receiver or transmitter + subdevice that implements them, so they are only exposed on the + /dev/v4l-subdev* device node. + + + Note that these devices can have multiple input or output pads which are + hooked up to e.g. HDMI connectors. Even though the subdevice will receive or + transmit video from/to only one of those pads, the other pads can still be + active when it comes to EDID (Extended Display Identification Data, + ) and HDCP (High-bandwidth Digital Content + Protection System, ) processing, allowing the device + to do the fairly slow EDID/HDCP handling in advance. This allows for quick + switching between connectors. + + These pads appear in several of the controls in this section as + bitmasks, one bit for each pad. Bit 0 corresponds to pad 0, bit 1 to pad 1, + etc. The maximum value of the control is the set of valid pads. + + + Digital Video Control IDs + + + + + + + + + + + ID + Type + Description + + + + + + V4L2_CID_DV_CLASS + class + + + The Digital Video class descriptor. + + + V4L2_CID_DV_TX_HOTPLUG + bitmask + + + Many connectors have a hotplug pin which is high + if EDID information is available from the source. This control shows the + state of the hotplug pin as seen by the transmitter. + Each bit corresponds to an output pad on the transmitter. If an output pad + does not have an associated hotplug pin, then the bit for that pad will be 0. + This read-only control is applicable to DVI-D, HDMI and DisplayPort connectors. + + + + V4L2_CID_DV_TX_RXSENSE + bitmask + + + Rx Sense is the detection of pull-ups on the TMDS + clock lines. This normally means that the sink has left/entered standby (i.e. + the transmitter can sense that the receiver is ready to receive video). + Each bit corresponds to an output pad on the transmitter. If an output pad + does not have an associated Rx Sense, then the bit for that pad will be 0. + This read-only control is applicable to DVI-D and HDMI devices. + + + + V4L2_CID_DV_TX_EDID_PRESENT + bitmask + + + When the transmitter sees the hotplug signal from the + receiver it will attempt to read the EDID. If set, then the transmitter has read + at least the first block (= 128 bytes). + Each bit corresponds to an output pad on the transmitter. If an output pad + does not support EDIDs, then the bit for that pad will be 0. + This read-only control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. + + + + V4L2_CID_DV_TX_MODE + enum v4l2_dv_tx_mode + + + HDMI transmitters can transmit in DVI-D mode (just video) + or in HDMI mode (video + audio + auxiliary data). This control selects which mode + to use: V4L2_DV_TX_MODE_DVI_D or V4L2_DV_TX_MODE_HDMI. + This control is applicable to HDMI connectors. + + + + V4L2_CID_DV_TX_RGB_RANGE + enum v4l2_dv_rgb_range + + + Select the quantization range for RGB output. V4L2_DV_RANGE_AUTO + follows the RGB quantization range specified in the standard for the video interface + (ie. for HDMI). V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the standard + to be compatible with sinks that have not implemented the standard correctly + (unfortunately quite common for HDMI and DVI-D). Full range allows all possible values to be + used whereas limited range sets the range to (16 << (N-8)) - (235 << (N-8)) + where N is the number of bits per component. + This control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. + + + + V4L2_CID_DV_RX_POWER_PRESENT + bitmask + + + Detects whether the receiver receives power from the source + (e.g. HDMI carries 5V on one of the pins). This is often used to power an eeprom + which contains EDID information, such that the source can read the EDID even if + the sink is in standby/power off. + Each bit corresponds to an input pad on the transmitter. If an input pad + cannot detect whether power is present, then the bit for that pad will be 0. + This read-only control is applicable to DVI-D, HDMI and DisplayPort connectors. + + + + V4L2_CID_DV_RX_RGB_RANGE + enum v4l2_dv_rgb_range + + + Select the quantization range for RGB input. V4L2_DV_RANGE_AUTO + follows the RGB quantization range specified in the standard for the video interface + (ie. for HDMI). V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the standard + to be compatible with sources that have not implemented the standard correctly + (unfortunately quite common for HDMI and DVI-D). Full range allows all possible values to be + used whereas limited range sets the range to (16 << (N-8)) - (235 << (N-8)) + where N is the number of bits per component. + This control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. + + + + + +
+ +
diff --git a/Documentation/DocBook/media/v4l/dev-osd.xml b/Documentation/DocBook/media/v4l/dev-osd.xml index 479d9433869aff1e18fdc12d3c2aa1d0bbee772b..dd91d6134e8c950a0add05ab4e6cd45f2c04b1f7 100644 --- a/Documentation/DocBook/media/v4l/dev-osd.xml +++ b/Documentation/DocBook/media/v4l/dev-osd.xml @@ -1,13 +1,6 @@ Video Output Overlay Interface Also known as On-Screen Display (OSD) - - Experimental - - This is an experimental -interface and may change in the future. - - Some video output devices can overlay a framebuffer image onto the outgoing video signal. Applications can set up such an overlay using this interface, which borrows structures and ioctls of the - For more information see the core RDS standard + For more information see the core RDS standard and the RBDS standard . Note that the RBDS standard as is used in the USA is almost identical diff --git a/Documentation/DocBook/media/v4l/dev-subdev.xml b/Documentation/DocBook/media/v4l/dev-subdev.xml index a3d9dd093268747de3751dcc41001e1fba638b11..d15aaf83f56f433a6fa09711a5b0ba5625ed30a0 100644 --- a/Documentation/DocBook/media/v4l/dev-subdev.xml +++ b/Documentation/DocBook/media/v4l/dev-subdev.xml @@ -374,29 +374,29 @@ rectangle --- if it is supported by the hardware. - Sink pad format. The user configures the sink pad + Sink pad format. The user configures the sink pad format. This format defines the parameters of the image the - entity receives through the pad for further processing. + entity receives through the pad for further processing. - Sink pad actual crop selection. The sink pad crop - defines the crop performed to the sink pad format. + Sink pad actual crop selection. The sink pad crop + defines the crop performed to the sink pad format. - Sink pad actual compose selection. The size of the + Sink pad actual compose selection. The size of the sink pad compose rectangle defines the scaling ratio compared to the size of the sink pad crop rectangle. The location of the compose rectangle specifies the location of the actual sink compose rectangle in the sink compose bounds - rectangle. + rectangle. - Source pad actual crop selection. Crop on the source + Source pad actual crop selection. Crop on the source pad defines crop performed to the image in the sink compose - bounds rectangle. + bounds rectangle. - Source pad format. The source pad format defines the + Source pad format. The source pad format defines the output pixel format of the subdev, as well as the other parameters with the exception of the image width and height. Width and height are defined by the size of the source pad - actual crop selection. + actual crop selection. Accessing any of the above rectangles not supported by the diff --git a/Documentation/DocBook/media/v4l/gen-errors.xml b/Documentation/DocBook/media/v4l/gen-errors.xml index 5bbf3ce1973a8df5d72619ce3df4cc62de52b036..7e29a4e1f696ec0c898fa431c4ea9163b5a12de9 100644 --- a/Documentation/DocBook/media/v4l/gen-errors.xml +++ b/Documentation/DocBook/media/v4l/gen-errors.xml @@ -6,6 +6,15 @@ &cs-str; + + EAGAIN (aka EWOULDBLOCK) + The ioctl can't be handled because the device is in state where + it can't perform it. This could happen for example in case where + device is sleeping and ioctl is performed to query statistics. + It is also returned when the ioctl would need to wait + for an event, but the device was opened in non-blocking mode. + + EBADF The file descriptor is not a valid. @@ -50,22 +59,12 @@ that this request would overcommit the usb bandwidth reserved for periodic transfers (up to 80% of the USB bandwidth). - - ENOSYS or EOPNOTSUPP - Function not available for this device (dvb API only. Will likely - be replaced anytime soon by ENOTTY). - EPERM Permission denied. Can be returned if the device needs write permission, or some special capabilities is needed (e. g. root) - - EWOULDBLOCK - Operation would block. Used when the ioctl would need to wait - for an event, but the device was opened in non-blocking mode. - diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml index 1885cc0755cb48a438aadfe686857f46ee541172..97f785add841c602d179a2b131060994deeaa26d 100644 --- a/Documentation/DocBook/media/v4l/io.xml +++ b/Documentation/DocBook/media/v4l/io.xml @@ -613,8 +613,8 @@ field is independent of the timestamp and __u32 sequence - Set by the driver, counting the frames in the -sequence. + Set by the driver, counting the frames (not fields!) in +sequence. This field is set for both input and output devices. In for details. __u32 reserved2 - A place holder for future extensions and custom -(driver defined) buffer types -V4L2_BUF_TYPE_PRIVATE and higher. Applications + A place holder for future extensions. Applications should set this to 0. __u32 reserved - A place holder for future extensions and custom -(driver defined) buffer types -V4L2_BUF_TYPE_PRIVATE and higher. Applications + A place holder for future extensions. Applications should set this to 0. @@ -827,14 +823,7 @@ should set this to 0. V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY 8 Buffer for video output overlay (OSD), see . Status: Experimental. - - - V4L2_BUF_TYPE_PRIVATE - 0x80 - This and higher values are reserved for custom -(driver defined) buffer types. + linkend="osd" />. diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml index 8eace3e2e7d4d7e0176f7539341d006fdb81bd83..2d3f0b1aefe0c878b6f133987b4abf70857c9c39 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml @@ -22,8 +22,7 @@ with 10 bits per colour compressed to 8 bits each, using DPCM compression. DPCM, differential pulse-code modulation, is lossy. Each colour component consumes 8 bits of memory. In other respects - this format is similar to . + this format is similar to . diff --git a/Documentation/DocBook/media/v4l/pixfmt-yvu420m.xml b/Documentation/DocBook/media/v4l/pixfmt-yvu420m.xml new file mode 100644 index 0000000000000000000000000000000000000000..2330667907c7313372a12ef50fb3139ce19803e9 --- /dev/null +++ b/Documentation/DocBook/media/v4l/pixfmt-yvu420m.xml @@ -0,0 +1,154 @@ + + + V4L2_PIX_FMT_YVU420M ('YM21') + &manvol; + + + V4L2_PIX_FMT_YVU420M + Variation of V4L2_PIX_FMT_YVU420 + with planes non contiguous in memory. + + + + Description + + This is a multi-planar format, as opposed to a packed format. +The three components are separated into three sub-images or planes. + +The Y plane is first. The Y plane has one byte per pixel. The Cr data +constitutes the second plane which is half the width and half +the height of the Y plane (and of the image). Each Cr belongs to four +pixels, a two-by-two square of the image. For example, +Cr0 belongs to Y'00, +Y'01, Y'10, and +Y'11. The Cb data, just like the Cr plane, constitutes +the third plane. + + If the Y plane has pad bytes after each row, then the Cr +and Cb planes have half as many pad bytes after their rows. In other +words, two Cx rows (including padding) is exactly as long as one Y row +(including padding). + + V4L2_PIX_FMT_YVU420M is intended to be +used only in drivers and applications that support the multi-planar API, +described in . + + + <constant>V4L2_PIX_FMT_YVU420M</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start0 + 0: + Y'00 + Y'01 + Y'02 + Y'03 + + + start0 + 4: + Y'10 + Y'11 + Y'12 + Y'13 + + + start0 + 8: + Y'20 + Y'21 + Y'22 + Y'23 + + + start0 + 12: + Y'30 + Y'31 + Y'32 + Y'33 + + + + start1 + 0: + Cr00 + Cr01 + + + start1 + 2: + Cr10 + Cr11 + + + + start2 + 0: + Cb00 + Cb01 + + + start2 + 2: + Cb10 + Cb11 + + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + + + 0 + YY + YY + + + + C + C + + + 1 + YY + YY + + + + + + 2 + YY + YY + + + + C + C + + + 3 + YY + YY + + + + + + + + + diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml index e58934c92895f159fc3200946a0d75ed50434e84..1ddbfabe31953b34fa8f51a8dc7c515daca39a06 100644 --- a/Documentation/DocBook/media/v4l/pixfmt.xml +++ b/Documentation/DocBook/media/v4l/pixfmt.xml @@ -708,6 +708,7 @@ information. &sub-y41p; &sub-yuv420; &sub-yuv420m; + &sub-yvu420m; &sub-yuv410; &sub-yuv422p; &sub-yuv411p; diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml index e7ed5077834deaa027fe1a202a555631338dba15..4c238ce068b0aa238155037be481336d800b8c78 100644 --- a/Documentation/DocBook/media/v4l/selection-api.xml +++ b/Documentation/DocBook/media/v4l/selection-api.xml @@ -40,6 +40,7 @@ cropping and composing rectangles have the same size.
Selection targets +
Cropping and composing targets @@ -52,12 +53,12 @@ cropping and composing rectangles have the same size.
+ + See for more + information.
- See for more - information. -
Configuration @@ -216,18 +217,17 @@ composing and cropping operations by setting the appropriate targets. The V4L2 API lacks any support for composing to and cropping from an image inside a memory buffer. The application could configure a capture device to fill only a part of an image by abusing V4L2 API. Cropping a smaller image from a larger -one is achieved by setting the field -&v4l2-pix-format;::bytesperline . Introducing an image offsets -could be done by modifying field &v4l2-buffer;::m:userptr - before calling VIDIOC_QBUF . Those +one is achieved by setting the field +&v4l2-pix-format;::bytesperline. Introducing an image offsets +could be done by modifying field &v4l2-buffer;::m_userptr +before calling VIDIOC_QBUF . Those operations should be avoided because they are not portable (endianness), and do not work for macroblock and Bayer formats and mmap buffers. The selection API deals with configuration of buffer cropping/composing in a clear, intuitive and portable way. Next, with the selection API the concepts of the padded target -and constraints flags are introduced. Finally, &v4l2-crop; - and &v4l2-cropcap; have no reserved -fields. Therefore there is no way to extend their functionality. The new - &v4l2-selection; provides a lot of place for future +and constraints flags are introduced. Finally, &v4l2-crop; and &v4l2-cropcap; +have no reserved fields. Therefore there is no way to extend their functionality. +The new &v4l2-selection; provides a lot of place for future extensions. Driver developers are encouraged to implement only selection API. The former cropping API would be simulated using the new one. diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index eee6908c749fd3b6fb66e0e9ab84c9775c09509b..10ccde9d16d016d6f141f62479afa8f73753850b 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -145,9 +145,12 @@ applications. --> hv Added VIDIOC_ENUM_FREQ_BANDS. + + + 3.5 2012-05-07 - sa, sn + sa, sn, hv Added V4L2_CTRL_TYPE_INTEGER_MENU and V4L2 subdev selections API. Improved the description of V4L2_CID_COLORFX control, added V4L2_CID_COLORFX_CBCR control. @@ -158,11 +161,8 @@ applications. --> V4L2_CID_3A_LOCK, V4L2_CID_AUTO_FOCUS_START, V4L2_CID_AUTO_FOCUS_STOP, V4L2_CID_AUTO_FOCUS_STATUS and V4L2_CID_AUTO_FOCUS_RANGE. - - 2012-05-01 - hv - Added VIDIOC_ENUM_DV_TIMINGS, VIDIOC_QUERY_DV_TIMINGS and - VIDIOC_DV_TIMINGS_CAP. + Added VIDIOC_ENUM_DV_TIMINGS, VIDIOC_QUERY_DV_TIMINGS and + VIDIOC_DV_TIMINGS_CAP. @@ -472,7 +472,7 @@ and discussions on the V4L mailing list. Video for Linux Two API Specification - Revision 3.5 + Revision 3.6 &sub-common; @@ -581,6 +581,7 @@ and discussions on the V4L mailing list. &sub-subdev-enum-frame-size; &sub-subdev-enum-mbus-code; &sub-subdev-g-crop; + &sub-subdev-g-edid; &sub-subdev-g-fmt; &sub-subdev-g-frame-interval; &sub-subdev-g-selection; diff --git a/Documentation/DocBook/media/v4l/vidioc-cropcap.xml b/Documentation/DocBook/media/v4l/vidioc-cropcap.xml index f1bac2c6e9781e1079ee4ade3a732c515a1cfe42..bf7cc979fdfa6bbba9d92c0d5f7e7b68cc6a1518 100644 --- a/Documentation/DocBook/media/v4l/vidioc-cropcap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-cropcap.xml @@ -59,6 +59,9 @@ constant except when switching the video standard. Remember this switch can occur implicit when switching the video input or output. + This ioctl must be implemented for video capture or output devices that +support cropping and/or scaling and/or have non-square pixels, and for overlay devices. + struct <structname>v4l2_cropcap</structname> @@ -70,10 +73,10 @@ output. Type of the data stream, set by the application. Only these types are valid here: V4L2_BUF_TYPE_VIDEO_CAPTURE, +V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, V4L2_BUF_TYPE_VIDEO_OUTPUT, -V4L2_BUF_TYPE_VIDEO_OVERLAY, and custom (driver -defined) types with code V4L2_BUF_TYPE_PRIVATE -and higher. See . +V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE and +V4L2_BUF_TYPE_VIDEO_OVERLAY. See . struct v4l2_rect @@ -156,8 +159,7 @@ on 22 Oct 2002 subject "Re:[V4L][patches!] Re:v4l2/kernel-2.5" --> EINVAL The &v4l2-cropcap; type is -invalid. This is not permitted for video capture, output and overlay devices, -which must support VIDIOC_CROPCAP. +invalid. diff --git a/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml b/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml index 74b87f6e480aa241f751c4423060979b078db7be..9215627b04c77827e7b3195857d53c0fbdcea355 100644 --- a/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml @@ -49,13 +49,6 @@ Description - - Experimental - - This is an experimental -interface and may change in the future. - - These ioctls control an audio/video (usually MPEG-) decoder. VIDIOC_DECODER_CMD sends a command to the decoder, VIDIOC_TRY_DECODER_CMD can be used to diff --git a/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml index f431b3ba79bd70ce3e0e277908f57d1168ff2ee2..0619ca5d2d36a250dae8ffe97771c5aad1e06c85 100644 --- a/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml @@ -49,13 +49,6 @@ Description - - Experimental - - This is an experimental -interface and may change in the future. - - These ioctls control an audio/video (usually MPEG-) encoder. VIDIOC_ENCODER_CMD sends a command to the encoder, VIDIOC_TRY_ENCODER_CMD can be used to diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml index 509f0012d2a68044860eb59077b0ee6717f28e38..fced5fb0dbf013d264c8be0fc994bbd43d1620f8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml @@ -229,6 +229,12 @@ intended for the user. is out of bounds. + + ENODATA + + Digital video presets are not supported for this input or output. + + diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml index 24c3bf4fd29a46cdcd71dc3bab3991df46002fc0..b3e17c1dfaf524bd4a485d3ab7bb4ccb5cb70203 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml @@ -106,6 +106,12 @@ application. is out of bounds. + + ENODATA + + Digital video presets are not supported for this input or output. + + diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml index 81ebe48317fe57064045fc77912f1ee17dc96a25..f8dfeed34fcac79793df6303f9e70f3393033104 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml @@ -58,6 +58,9 @@ structure. Drivers fill the rest of the structure or return an incrementing by one until EINVAL is returned. + Note that after switching input or output the list of enumerated image +formats may be different. +
struct <structname>v4l2_fmtdesc</structname> @@ -78,10 +81,8 @@ Only these types are valid here: V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, V4L2_BUF_TYPE_VIDEO_OUTPUT, -V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE, -V4L2_BUF_TYPE_VIDEO_OVERLAY, and custom (driver -defined) types with code V4L2_BUF_TYPE_PRIVATE -and higher. See . +V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE and +V4L2_BUF_TYPE_VIDEO_OVERLAY. See . __u32 diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-framesizes.xml b/Documentation/DocBook/media/v4l/vidioc-enum-framesizes.xml index f77a13f486d7968e60128d31a485bde9e580bc5f..a78454b5abcd875e517418f4b803ebed1dce8b1a 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-framesizes.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-framesizes.xml @@ -50,13 +50,6 @@ and pixel format and receives a frame width and height. Description - - Experimental - - This is an experimental -interface and may change in the future. - - This ioctl allows applications to enumerate all frame sizes (&ie; width and height in pixels) that the device supports for the given pixel format. diff --git a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml index 46d5a044a537a0f2647a4755f5601f9cbfc86d5c..3c9a81305ad4af75f8c6728dbfa9a879db4e6167 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml @@ -283,7 +283,7 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009. This input supports setting DV presets by using VIDIOC_S_DV_PRESET. - V4L2_IN_CAP_CUSTOM_TIMINGS + V4L2_IN_CAP_DV_TIMINGS 0x00000002 This input supports setting video timings by using VIDIOC_S_DV_TIMINGS. diff --git a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml index 428020000ef001f4de42b70f243ac551603f1068..f4ab0798545dc7f3ff67a5d5e0d51d2c5562d90b 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml @@ -168,7 +168,7 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009. This output supports setting DV presets by using VIDIOC_S_DV_PRESET. - V4L2_OUT_CAP_CUSTOM_TIMINGS + V4L2_OUT_CAP_DV_TIMINGS 0x00000002 This output supports setting video timings by using VIDIOC_S_DV_TIMINGS. diff --git a/Documentation/DocBook/media/v4l/vidioc-enumstd.xml b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml index 3a5fc5405f96a869f0ff93262211c430dcbd4123..8065099401d16fb34a12ce6156592f2a601f3ce0 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enumstd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml @@ -378,6 +378,12 @@ system) is out of bounds. + + ENODATA + + Standard video timings are not supported for this input or output. + + diff --git a/Documentation/DocBook/media/v4l/vidioc-g-crop.xml b/Documentation/DocBook/media/v4l/vidioc-g-crop.xml index c4ff3b1887fb6b0782caf2c90c6edfa7fb64ed72..75c6a93de3c173246aff4763da48cfdc4b3ce81f 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-crop.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-crop.xml @@ -104,10 +104,8 @@ changed and VIDIOC_S_CROP returns the type Type of the data stream, set by the application. Only these types are valid here: V4L2_BUF_TYPE_VIDEO_CAPTURE, -V4L2_BUF_TYPE_VIDEO_OUTPUT, -V4L2_BUF_TYPE_VIDEO_OVERLAY, and custom (driver -defined) types with code V4L2_BUF_TYPE_PRIVATE -and higher. See . +V4L2_BUF_TYPE_VIDEO_OUTPUT and +V4L2_BUF_TYPE_VIDEO_OVERLAY. See . &v4l2-rect; diff --git a/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml b/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml index 61be9fa3803acbb707277e7e3b5527b4d681533b..b9ea37634f6ccbfe06697df5459ed5232b406543 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml @@ -77,6 +77,12 @@ If the preset is not supported, it returns an &EINVAL; VIDIOC_S_DV_PRESET,VIDIOC_S_DV_PRESET parameter was unsuitable. + + ENODATA + + Digital video presets are not supported for this input or output. + + EBUSY @@ -104,7 +110,4 @@ If the preset is not supported, it returns an &EINVAL;
- - &return-value; - diff --git a/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml index eda1a2991bbe4382f717c5407295407220250161..72369707bd77d00bd78e1546f2d8c17a1e6c0ae8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml @@ -56,7 +56,9 @@ a pointer to the &v4l2-dv-timings; structure as argument. If the ioctl is not su or the timing values are not correct, the driver returns &EINVAL;. The linux/v4l2-dv-timings.h header can be used to get the timings of the formats in the and -standards. +standards. If the current input or output does not support DV timings (e.g. if +&VIDIOC-ENUMINPUT; does not set the V4L2_IN_CAP_DV_TIMINGS flag), then +&ENODATA; is returned. @@ -70,6 +72,12 @@ standards. VIDIOC_S_DV_TIMINGS parameter was unsuitable. + + ENODATA + + Digital video timings are not supported for this input or output. + + EBUSY @@ -320,7 +328,4 @@ detected or used depends on the hardware. - - &return-value; - diff --git a/Documentation/DocBook/media/v4l/vidioc-g-enc-index.xml b/Documentation/DocBook/media/v4l/vidioc-g-enc-index.xml index 2aef02c9044e039db683f9b37307e24ae0c8eb3e..be25029a16f11dff77a39e5b026fe888db4f5ada 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-enc-index.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-enc-index.xml @@ -48,13 +48,6 @@ Description - - Experimental - - This is an experimental -interface and may change in the future. - - The VIDIOC_G_ENC_INDEX ioctl provides meta data about a compressed video stream the same or another application currently reads from the driver, which is useful for diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml index 52acff193a6f5dc651d10e5c0413c9e90e05cdbc..ee8f56e1bac0924a1cffc27462743ad24aa62088 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml @@ -81,7 +81,7 @@ the application calls the VIDIOC_S_FMT ioctl with a pointer to a v4l2_format structure the driver checks and adjusts the parameters against hardware abilities. Drivers -should not return an error code unless the input is ambiguous, this is +should not return an error code unless the type field is invalid, this is a mechanism to fathom device capabilities and to approach parameters acceptable for both the application and driver. On success the driver may program the hardware, allocate resources and generally prepare for @@ -107,6 +107,10 @@ disabling I/O or possibly time consuming hardware preparations. Although strongly recommended drivers are not required to implement this ioctl. + The format as returned by VIDIOC_TRY_FMT +must be identical to what VIDIOC_S_FMT returns for +the same input or output. + struct <structname>v4l2_format</structname> @@ -170,9 +174,7 @@ capture and output devices. __u8 raw_data[200] - Place holder for future extensions and custom -(driver defined) formats with type -V4L2_BUF_TYPE_PRIVATE and higher. + Place holder for future extensions. @@ -187,8 +189,7 @@ capture and output devices.EINVAL The &v4l2-format; type -field is invalid, the requested buffer type not supported, or the -format is not supported with this buffer type. +field is invalid or the requested buffer type not supported. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml index f83d2cdd1185419850783f18830abac424b340b8..9058224d1bbfff9c9bcbb71ca017793569a92941 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml @@ -108,9 +108,7 @@ devices.__u8raw_data[200] - A place holder for future extensions and custom -(driver defined) buffer types V4L2_BUF_TYPE_PRIVATE and -higher. + A place holder for future extensions. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml index f76d8a6d9b92df2133babc08456ac3bfc4d9c171..b11ec75e21a10ddff0ea99f16897ec4d660179be 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml @@ -152,12 +152,10 @@ satisfactory parameters have been negotiated. If constraints flags have to be violated at then ERANGE is returned. The error indicates that there exist no rectangle that satisfies the constraints. - - Selection targets and flags are documented in . -
+
Size adjustments with constraint flags. @@ -170,9 +168,9 @@ exist no rectangle that satisfies the constraints.
-
+ - +
struct <structname>v4l2_selection</structname> @@ -208,6 +206,7 @@ exist no rectangle that satisfies the constraints.
+ diff --git a/Documentation/DocBook/media/v4l/vidioc-g-std.xml b/Documentation/DocBook/media/v4l/vidioc-g-std.xml index 99ff1a016220aee8461cddf088de122057c29ecf..4a898417de28933cf319d7ea110db3c7365bf199 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-std.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-std.xml @@ -72,7 +72,9 @@ flags, being a write-only ioctl it does not return the actual new standard as the current input does not support the requested standard the driver returns an &EINVAL;. When the standard set is ambiguous drivers may return EINVAL or choose any of the requested -standards. +standards. If the current input or output does not support standard video timings (e.g. if +&VIDIOC-ENUMINPUT; does not set the V4L2_IN_CAP_STD flag), then +&ENODATA; is returned. @@ -85,6 +87,12 @@ standards. The VIDIOC_S_STD parameter was unsuitable. + + ENODATA + + Standard video timings are not supported for this input or output. + + diff --git a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml index 720395127904574b69db6dd2b042f46b3d14901b..6cc82010c7366921792eb4204655bfc92675d0bc 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml @@ -125,7 +125,7 @@ the structure refers to a radio tuner the V4L2_TUNER_CAP_NORM flags can't be used. If multiple frequency bands are supported, then capability is the union of all -capability> fields of each &v4l2-frequency-band;. +capability fields of each &v4l2-frequency-band;. @@ -354,6 +354,12 @@ radio tuners. The &VIDIOC-ENUM-FREQ-BANDS; ioctl can be used to enumerate the available frequency bands. + + V4L2_TUNER_CAP_HWSEEK_PROG_LIM + 0x0800 + The range to search when using the hardware seek functionality + is programmable, see &VIDIOC-S-HW-FREQ-SEEK; for details. + diff --git a/Documentation/DocBook/media/v4l/vidioc-qbuf.xml b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml index 77ff5be0809d13ef530ff07718e243aab98358fc..6a821a65a5aec9ce1e196261c5149b666f2e4c2e 100644 --- a/Documentation/DocBook/media/v4l/vidioc-qbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml @@ -155,6 +155,8 @@ or no buffers have been allocated yet, or the userptr or length are invalid. + + EIO VIDIOC_DQBUF failed due to an diff --git a/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml index 1bc8aeb3ff1fe2a57516f39dd54128fc4c30e116..68b49d09e2454d8e6b988521b672bdd80750e182 100644 --- a/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml +++ b/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml @@ -65,5 +65,14 @@ returned. &return-value; + + + + ENODATA + + Digital video presets are not supported for this input or output. + + + diff --git a/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml index 44935a0ffcf0bb619d40898ab0e937f0e13de82b..e185f149e0a18914538eab16e32f684ce15f145d 100644 --- a/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml +++ b/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml @@ -77,6 +77,12 @@ capabilities in order to give more precise feedback to the user. &return-value; + + ENODATA + + Digital video timings are not supported for this input or output. + + ENOLINK diff --git a/Documentation/DocBook/media/v4l/vidioc-querycap.xml b/Documentation/DocBook/media/v4l/vidioc-querycap.xml index f33dd746b66b8177b60f5a431aefc937973e5eea..4c70215ae03fee9040c0472c489753dd3d1fed9a 100644 --- a/Documentation/DocBook/media/v4l/vidioc-querycap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-querycap.xml @@ -90,11 +90,13 @@ ambiguities. __u8 bus_info[32] Location of the device in the system, a -NUL-terminated ASCII string. For example: "PCI Slot 4". This +NUL-terminated ASCII string. For example: "PCI:0000:05:06.0". This information is intended for users, to distinguish multiple -identical devices. If no such information is available the field may -simply count the devices controlled by the driver, or contain the -empty string (bus_info[0] = 0). +identical devices. If no such information is available the field must +simply count the devices controlled by the driver ("platform:vivi-000"). +The bus_info must start with "PCI:" for PCI boards, "PCIe:" for PCI Express boards, +"usb-" for USB devices, "I2C:" for i2c devices, "ISA:" for ISA devices, +"parport" for parallel port devices and "platform:" for platform devices. __u32 diff --git a/Documentation/DocBook/media/v4l/vidioc-querystd.xml b/Documentation/DocBook/media/v4l/vidioc-querystd.xml index 4b79c7c04ed6631c30adc168cf18d5e6608d8478..fe80a183d95776da5c8841ee277496f991420c6c 100644 --- a/Documentation/DocBook/media/v4l/vidioc-querystd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-querystd.xml @@ -62,5 +62,13 @@ current video input or output. &return-value; + + + ENODATA + + Standard video timings are not supported for this input or output. + + + diff --git a/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml b/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml index d7c95057bc5197e68a00ea22a388150a61702478..2b50ef2007f3cc96dc363176e2c173af96c3e2a8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml +++ b/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml @@ -109,9 +109,8 @@ as the &v4l2-format; type field. See __u32 reserved[2] - A place holder for future extensions and custom -(driver defined) buffer types V4L2_BUF_TYPE_PRIVATE and -higher. This array should be zeroed by applications. + A place holder for future extensions. This array should +be zeroed by applications. diff --git a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml index 3dd1bec6d3c74c1a6619364aaae41d85d615d17f..5b379e752194a2b096ce512e11facde121c8aabc 100644 --- a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml +++ b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml @@ -75,6 +75,9 @@ seek is started. This ioctl is supported if the V4L2_CAP_HW_FREQ_SEEK capability is set. + If this ioctl is called from a non-blocking filehandle, then &EAGAIN; is + returned and no seek takes place. + struct <structname>v4l2_hw_freq_seek</structname> @@ -157,6 +160,13 @@ one of the values in the type, fields is wrong. + + EAGAIN + + Attempted to call VIDIOC_S_HW_FREQ_SEEK + with the filehandle in non-blocking mode. + + ENODATA diff --git a/Documentation/DocBook/media/v4l/vidioc-streamon.xml b/Documentation/DocBook/media/v4l/vidioc-streamon.xml index 81cca4569050da8d789dc68973798b69fdbc8a35..716ea15e54a174be6321f19aa4be69fe00487f28 100644 --- a/Documentation/DocBook/media/v4l/vidioc-streamon.xml +++ b/Documentation/DocBook/media/v4l/vidioc-streamon.xml @@ -74,7 +74,12 @@ not transmitted yet. I/O returns to the same state as after calling stream type. This is the same as &v4l2-requestbuffers; type. - Note applications can be preempted for unknown periods right + If VIDIOC_STREAMON is called when streaming +is already in progress, or if VIDIOC_STREAMOFF is called +when streaming is already stopped, then the ioctl does nothing and 0 is +returned. + + Note that applications can be preempted for unknown periods right before or after the VIDIOC_STREAMON or VIDIOC_STREAMOFF calls, there is no notion of starting or stopping "now". Buffer timestamps can be used to diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-edid.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-edid.xml new file mode 100644 index 0000000000000000000000000000000000000000..bbd18f0e6ede8a16797782e3b0dabe04515fc1d2 --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-edid.xml @@ -0,0 +1,152 @@ + + + ioctl VIDIOC_SUBDEV_G_EDID, VIDIOC_SUBDEV_S_EDID + &manvol; + + + + VIDIOC_SUBDEV_G_EDID + VIDIOC_SUBDEV_S_EDID + Get or set the EDID of a video receiver/transmitter + + + + + + int ioctl + int fd + int request + struct v4l2_subdev_edid *argp + + + + + int ioctl + int fd + int request + const struct v4l2_subdev_edid *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_SUBDEV_G_EDID, VIDIOC_SUBDEV_S_EDID + + + + argp + + + + + + + + + Description + These ioctls can be used to get or set an EDID associated with an input pad + from a receiver or an output pad of a transmitter subdevice. + + To get the EDID data the application has to fill in the pad, + start_block, blocks and edid + fields and call VIDIOC_SUBDEV_G_EDID. The current EDID from block + start_block and of size blocks + will be placed in the memory edid points to. The edid + pointer must point to memory at least blocks * 128 bytes + large (the size of one block is 128 bytes). + + If there are fewer blocks than specified, then the driver will set blocks + to the actual number of blocks. If there are no EDID blocks available at all, then the error code + ENODATA is set. + + If blocks have to be retrieved from the sink, then this call will block until they + have been read. + + To set the EDID blocks of a receiver the application has to fill in the pad, + blocks and edid fields and set + start_block to 0. It is not possible to set part of an EDID, + it is always all or nothing. Setting the EDID data is only valid for receivers as it makes + no sense for a transmitter. + + The driver assumes that the full EDID is passed in. If there are more EDID blocks than + the hardware can handle then the EDID is not written, but instead the error code E2BIG is set + and blocks is set to the maximum that the hardware supports. + If start_block is any + value other than 0 then the error code EINVAL is set. + + To disable an EDID you set blocks to 0. Depending on the + hardware this will drive the hotplug pin low and/or block the source from reading the EDID + data in some way. In any case, the end result is the same: the EDID is no longer available. + + +
+ struct <structname>v4l2_subdev_edid</structname> + + &cs-str; + + + __u32 + pad + Pad for which to get/set the EDID blocks. + + + __u32 + start_block + Read the EDID from starting with this block. Must be 0 when setting + the EDID. + + + __u32 + blocks + The number of blocks to get or set. Must be less or equal to 256 (the + maximum number of blocks as defined by the standard). When you set the EDID and + blocks is 0, then the EDID is disabled or erased. + + + __u8 * + edid + Pointer to memory that contains the EDID. The minimum size is + blocks * 128. + + + __u32 + reserved[5] + Reserved for future extensions. Applications and drivers must + set the array to zero. + + + +
+ + + + &return-value; + + + + ENODATA + + The EDID data is not available. + + + + E2BIG + + The EDID data you provided is more than the hardware can handle. + + + + + diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml index f33cc814a01d14d07483a04051f4513ace88876c..1ba9e999af3fec1bed5a3a116f37ac0358caf4e0 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml @@ -69,23 +69,22 @@ more information on how each selection target affects the image processing pipeline inside the subdevice. -
+ Types of selection targets There are two types of selection targets: actual and bounds. The actual targets are the targets which configure the hardware. The BOUNDS target will return a rectangle that contain all possible actual rectangles. -
+ -
+ Discovering supported features To discover which targets are supported, the user can perform VIDIOC_SUBDEV_G_SELECTION on them. Any unsupported target will return EINVAL. -
Selection targets and flags are documented in . @@ -132,6 +131,7 @@ + diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl index 4e8e8985cc1722a5594efdb61c2c0a5af1294929..f2413acfe24105b00b529feca5a0490d6a9b126d 100644 --- a/Documentation/DocBook/media_api.tmpl +++ b/Documentation/DocBook/media_api.tmpl @@ -29,7 +29,7 @@ LINUX MEDIA INFRASTRUCTURE API - 2009-2011 + 2009-2012 LinuxTV Developers @@ -53,7 +53,7 @@ Foundation. A copy of the license is included in the chapter entitled video and radio straming devices, including video cameras, analog and digital TV receiver cards, AM/FM receiver cards, streaming capture devices. - It is divided into three parts. + It is divided into four parts. The first part covers radio, capture, cameras and analog TV devices. The second part covers the @@ -62,7 +62,8 @@ Foundation. A copy of the license is included in the chapter entitled in fact it covers several different video standards including DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated to documment support also for DVB-S2, ISDB-T and ISDB-S. - The third part covers Remote Controller API + The third part covers the Remote Controller API. + The fourth part covers the Media Controller API. For additional information and for the latest development code, see: http://linuxtv.org. For discussing improvements, reporting troubles, sending new drivers, etc, please mail to: Linux Media Mailing List (LMML).. @@ -87,7 +88,7 @@ Foundation. A copy of the license is included in the chapter entitled - 2009-2011 + 2009-2012 Mauro Carvalho Chehab diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt index fc103d7a04740d338bf0490a2133674c25986d59..cdb20d41a44ad8992f2f7b6e13a01d0200c67a32 100644 --- a/Documentation/RCU/checklist.txt +++ b/Documentation/RCU/checklist.txt @@ -310,6 +310,12 @@ over a rather long period of time, but improvements are always welcome! code under the influence of preempt_disable(), you instead need to use synchronize_irq() or synchronize_sched(). + This same limitation also applies to synchronize_rcu_bh() + and synchronize_srcu(), as well as to the asynchronous and + expedited forms of the three primitives, namely call_rcu(), + call_rcu_bh(), call_srcu(), synchronize_rcu_expedited(), + synchronize_rcu_bh_expedited(), and synchronize_srcu_expedited(). + 12. Any lock acquired by an RCU callback must be acquired elsewhere with softirq disabled, e.g., via spin_lock_irqsave(), spin_lock_bh(), etc. Failing to disable irq on a given diff --git a/Documentation/RCU/stallwarn.txt b/Documentation/RCU/stallwarn.txt index 523364e4e1f11bb5ecaf4477b118e570dfa79611..1927151b386bb68650e44cb8a03d767f01c8d89a 100644 --- a/Documentation/RCU/stallwarn.txt +++ b/Documentation/RCU/stallwarn.txt @@ -99,7 +99,7 @@ In kernels with CONFIG_RCU_FAST_NO_HZ, even more information is printed: INFO: rcu_preempt detected stall on CPU - 0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 drain=0 . timer=-1 + 0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 drain=0 . timer not pending (t=65000 jiffies) The "(64628 ticks this GP)" indicates that this CPU has taken more @@ -116,13 +116,13 @@ number between the two "/"s is the value of the nesting, which will be a small positive number if in the idle loop and a very large positive number (as shown above) otherwise. -For CONFIG_RCU_FAST_NO_HZ kernels, the "drain=0" indicates that the -CPU is not in the process of trying to force itself into dyntick-idle -state, the "." indicates that the CPU has not given up forcing RCU -into dyntick-idle mode (it would be "H" otherwise), and the "timer=-1" -indicates that the CPU has not recented forced RCU into dyntick-idle -mode (it would otherwise indicate the number of microseconds remaining -in this forced state). +For CONFIG_RCU_FAST_NO_HZ kernels, the "drain=0" indicates that the CPU is +not in the process of trying to force itself into dyntick-idle state, the +"." indicates that the CPU has not given up forcing RCU into dyntick-idle +mode (it would be "H" otherwise), and the "timer not pending" indicates +that the CPU has not recently forced RCU into dyntick-idle mode (it +would otherwise indicate the number of microseconds remaining in this +forced state). Multiple Warnings From One Stall diff --git a/Documentation/RCU/trace.txt b/Documentation/RCU/trace.txt index f6f15ce399036e4c03b99d9d7bd77aab7480cd98..672d19083252499cfe8ca3034f2b59a1ce0557d8 100644 --- a/Documentation/RCU/trace.txt +++ b/Documentation/RCU/trace.txt @@ -333,23 +333,23 @@ o Each element of the form "1/1 0:127 ^0" represents one struct The output of "cat rcu/rcu_pending" looks as follows: rcu_sched: - 0 np=255892 qsp=53936 rpq=85 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741 - 1 np=261224 qsp=54638 rpq=33 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792 - 2 np=237496 qsp=49664 rpq=23 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629 - 3 np=236249 qsp=48766 rpq=98 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723 - 4 np=221310 qsp=46850 rpq=7 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110 - 5 np=237332 qsp=48449 rpq=9 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456 - 6 np=219995 qsp=46718 rpq=12 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834 - 7 np=249893 qsp=49390 rpq=42 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888 + 0 np=255892 qsp=53936 rpq=85 cbr=0 cng=14417 gpc=10033 gps=24320 nn=146741 + 1 np=261224 qsp=54638 rpq=33 cbr=0 cng=25723 gpc=16310 gps=2849 nn=155792 + 2 np=237496 qsp=49664 rpq=23 cbr=0 cng=2762 gpc=45478 gps=1762 nn=136629 + 3 np=236249 qsp=48766 rpq=98 cbr=0 cng=286 gpc=48049 gps=1218 nn=137723 + 4 np=221310 qsp=46850 rpq=7 cbr=0 cng=26 gpc=43161 gps=4634 nn=123110 + 5 np=237332 qsp=48449 rpq=9 cbr=0 cng=54 gpc=47920 gps=3252 nn=137456 + 6 np=219995 qsp=46718 rpq=12 cbr=0 cng=50 gpc=42098 gps=6093 nn=120834 + 7 np=249893 qsp=49390 rpq=42 cbr=0 cng=72 gpc=38400 gps=17102 nn=144888 rcu_bh: - 0 np=146741 qsp=1419 rpq=6 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314 - 1 np=155792 qsp=12597 rpq=3 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180 - 2 np=136629 qsp=18680 rpq=1 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936 - 3 np=137723 qsp=2843 rpq=0 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863 - 4 np=123110 qsp=12433 rpq=0 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671 - 5 np=137456 qsp=4210 rpq=1 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235 - 6 np=120834 qsp=9902 rpq=2 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921 - 7 np=144888 qsp=26336 rpq=0 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542 + 0 np=146741 qsp=1419 rpq=6 cbr=0 cng=6 gpc=0 gps=0 nn=145314 + 1 np=155792 qsp=12597 rpq=3 cbr=0 cng=0 gpc=4 gps=8 nn=143180 + 2 np=136629 qsp=18680 rpq=1 cbr=0 cng=0 gpc=7 gps=6 nn=117936 + 3 np=137723 qsp=2843 rpq=0 cbr=0 cng=0 gpc=10 gps=7 nn=134863 + 4 np=123110 qsp=12433 rpq=0 cbr=0 cng=0 gpc=4 gps=2 nn=110671 + 5 np=137456 qsp=4210 rpq=1 cbr=0 cng=0 gpc=6 gps=5 nn=133235 + 6 np=120834 qsp=9902 rpq=2 cbr=0 cng=0 gpc=6 gps=3 nn=110921 + 7 np=144888 qsp=26336 rpq=0 cbr=0 cng=0 gpc=8 gps=2 nn=118542 As always, this is once again split into "rcu_sched" and "rcu_bh" portions, with CONFIG_TREE_PREEMPT_RCU kernels having an additional @@ -377,17 +377,6 @@ o "gpc" is the number of times that an old grace period had o "gps" is the number of times that a new grace period had started, but this CPU was not yet aware of it. -o "nf" is the number of times that this CPU suspected that the - current grace period had run for too long, and thus needed to - be forced. - - Please note that "forcing" consists of sending resched IPIs - to holdout CPUs. If that CPU really still is in an old RCU - read-side critical section, then we really do have to wait for it. - The assumption behing "forcing" is that the CPU is not still in - an old RCU read-side critical section, but has not yet responded - for some other reason. - o "nn" is the number of times that this CPU needed nothing. Alert readers will note that the rcu "nn" number for a given CPU very closely matches the rcu_bh "np" number for that same CPU. This diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 69ee188515e7a9c907ec243dfff21852e55a9998..bf0f6de2aa00c8d6ee482890bc2bd05434b772c2 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -873,7 +873,7 @@ d. Do you need to treat NMI handlers, hardirq handlers, and code segments with preemption disabled (whether via preempt_disable(), local_irq_save(), local_bh_disable(), or some other mechanism) as if they were explicit RCU readers? - If so, you need RCU-sched. + If so, RCU-sched is the only choice that will work for you. e. Do you need RCU grace periods to complete even in the face of softirq monopolization of one or more of the CPUs? For @@ -884,7 +884,12 @@ f. Is your workload too update-intensive for normal use of RCU, but inappropriate for other synchronization mechanisms? If so, consider SLAB_DESTROY_BY_RCU. But please be careful! -g. Otherwise, use RCU. +g. Do you need read-side critical sections that are respected + even though they are in the middle of the idle loop, during + user-mode execution, or on an offlined CPU? If so, SRCU is the + only choice that will work for you. + +h. Otherwise, use RCU. Of course, this all assumes that you have determined that RCU is in fact the right tool for your job. diff --git a/Documentation/accounting/getdelays.c b/Documentation/accounting/getdelays.c index f6318f6d7bafcdbcceee0f6eb89edc4af26b287b..6f706aca2049718c436501f56b8e33592f7f14d6 100644 --- a/Documentation/accounting/getdelays.c +++ b/Documentation/accounting/getdelays.c @@ -98,10 +98,9 @@ static int create_nl_socket(int protocol) if (rcvbufsz) if (setsockopt(fd, SOL_SOCKET, SO_RCVBUF, &rcvbufsz, sizeof(rcvbufsz)) < 0) { - fprintf(stderr, "Unable to set socket rcv buf size " - "to %d\n", + fprintf(stderr, "Unable to set socket rcv buf size to %d\n", rcvbufsz); - return -1; + goto error; } memset(&local, 0, sizeof(local)); diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt index 5f5aa16047ff4f8f5a9680101572c8afc34e799c..bfc9cb19abcd56ca23f240c9854f67e0c9f3ec0f 100644 --- a/Documentation/aoe/aoe.txt +++ b/Documentation/aoe/aoe.txt @@ -1,8 +1,16 @@ -The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ... +ATA over Ethernet is a network protocol that provides simple access to +block storage on the LAN. - http://www.coraid.com/SUPPORT/EtherDrive-HBA + http://support.coraid.com/documents/AoEr11.txt - It has many tips and hints! +The EtherDrive (R) HOWTO for 2.6 and 3.x kernels is found at ... + + http://support.coraid.com/support/linux/EtherDrive-2.6-HOWTO.html + +It has many tips and hints! Please see, especially, recommended +tunings for virtual memory: + + http://support.coraid.com/support/linux/EtherDrive-2.6-HOWTO-5.html#ss5.19 The aoetools are userland programs that are designed to work with this driver. The aoetools are on sourceforge. @@ -23,20 +31,12 @@ CREATING DEVICE NODES There is a udev-install.sh script that shows how to install these rules on your system. - If you are not using udev, two scripts are provided in - Documentation/aoe as examples of static device node creation for - using the aoe driver. - - rm -rf /dev/etherd - sh Documentation/aoe/mkdevs.sh /dev/etherd - - ... or to make just one shelf's worth of block device nodes ... - - sh Documentation/aoe/mkshelf.sh /dev/etherd 0 - There is also an autoload script that shows how to edit /etc/modprobe.d/aoe.conf to ensure that the aoe module is loaded when - necessary. + necessary. Preloading the aoe module is preferable to autoloading, + however, because AoE discovery takes a few seconds. It can be + confusing when an AoE device is not present the first time the a + command is run but appears a second later. USING DEVICE NODES @@ -51,9 +51,9 @@ USING DEVICE NODES "echo > /dev/etherd/discover" tells the driver to find out what AoE devices are available. - These character devices may disappear and be replaced by sysfs - counterparts. Using the commands in aoetools insulates users from - these implementation details. + In the future these character devices may disappear and be replaced + by sysfs counterparts. Using the commands in aoetools insulates + users from these implementation details. The block devices are named like this: @@ -76,8 +76,8 @@ USING SYSFS The netif attribute is the network interface on the localhost through which we are communicating with the remote AoE device. - There is a script in this directory that formats this information - in a convenient way. Users with aoetools can use the aoe-stat + There is a script in this directory that formats this information in + a convenient way. Users with aoetools should use the aoe-stat command. root@makki root# sh Documentation/aoe/status.sh @@ -121,3 +121,21 @@ DRIVER OPTIONS usage example for the module parameter. modprobe aoe_iflist="eth1 eth3" + + The aoe_deadsecs module parameter determines the maximum number of + seconds that the driver will wait for an AoE device to provide a + response to an AoE command. After aoe_deadsecs seconds have + elapsed, the AoE device will be marked as "down". + + The aoe_maxout module parameter has a default of 128. This is the + maximum number of unresponded packets that will be sent to an AoE + target at one time. + + The aoe_dyndevs module parameter defaults to 1, meaning that the + driver will assign a block device minor number to a discovered AoE + target based on the order of its discovery. With dynamic minor + device numbers in use, a greater range of AoE shelf and slot + addresses can be supported. Users with udev will never have to + think about minor numbers. Using aoe_dyndevs=0 allows device nodes + to be pre-created using a static minor-number scheme with the + aoe-mkshelf script in the aoetools. diff --git a/Documentation/aoe/mkdevs.sh b/Documentation/aoe/mkdevs.sh deleted file mode 100644 index 44c0ab7024328d4229ef7609c2ae34aa4e730a1f..0000000000000000000000000000000000000000 --- a/Documentation/aoe/mkdevs.sh +++ /dev/null @@ -1,41 +0,0 @@ -#!/bin/sh - -n_shelves=${n_shelves:-10} -n_partitions=${n_partitions:-16} - -if test "$#" != "1"; then - echo "Usage: sh `basename $0` {dir}" 1>&2 - echo " n_partitions=16 sh `basename $0` {dir}" 1>&2 - exit 1 -fi -dir=$1 - -MAJOR=152 - -echo "Creating AoE devnode files in $dir ..." - -set -e - -mkdir -p $dir - -# (Status info is in sysfs. See status.sh.) -# rm -f $dir/stat -# mknod -m 0400 $dir/stat c $MAJOR 1 -rm -f $dir/err -mknod -m 0400 $dir/err c $MAJOR 2 -rm -f $dir/discover -mknod -m 0200 $dir/discover c $MAJOR 3 -rm -f $dir/interfaces -mknod -m 0200 $dir/interfaces c $MAJOR 4 -rm -f $dir/revalidate -mknod -m 0200 $dir/revalidate c $MAJOR 5 -rm -f $dir/flush -mknod -m 0200 $dir/flush c $MAJOR 6 - -export n_partitions -mkshelf=`echo $0 | sed 's!mkdevs!mkshelf!'` -i=0 -while test $i -lt $n_shelves; do - sh -xc "sh $mkshelf $dir $i" - i=`expr $i + 1` -done diff --git a/Documentation/aoe/mkshelf.sh b/Documentation/aoe/mkshelf.sh deleted file mode 100644 index 32615814271cce1f90e6be56d5a26eb15c12de3d..0000000000000000000000000000000000000000 --- a/Documentation/aoe/mkshelf.sh +++ /dev/null @@ -1,28 +0,0 @@ -#! /bin/sh - -if test "$#" != "2"; then - echo "Usage: sh `basename $0` {dir} {shelfaddress}" 1>&2 - echo " n_partitions=16 sh `basename $0` {dir} {shelfaddress}" 1>&2 - exit 1 -fi -n_partitions=${n_partitions:-16} -dir=$1 -shelf=$2 -nslots=16 -maxslot=`echo $nslots 1 - p | dc` -MAJOR=152 - -set -e - -minor=`echo $nslots \* $shelf \* $n_partitions | bc` -endp=`echo $n_partitions - 1 | bc` -for slot in `seq 0 $maxslot`; do - for part in `seq 0 $endp`; do - name=e$shelf.$slot - test "$part" != "0" && name=${name}p$part - rm -f $dir/$name - mknod -m 0660 $dir/$name b $MAJOR $minor - - minor=`expr $minor + 1` - done -done diff --git a/Documentation/aoe/status.sh b/Documentation/aoe/status.sh index 751f3be514b831296b038fd343443c15d0aa5b32..eeec7baae57a8f3db9a0da1583c0e3c8e0e8408d 100644 --- a/Documentation/aoe/status.sh +++ b/Documentation/aoe/status.sh @@ -1,5 +1,8 @@ #! /bin/sh # collate and present sysfs information about AoE storage +# +# A more complete version of this script is aoe-stat, in the +# aoetools. set -e format="%8s\t%8s\t%8s\n" diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README new file mode 100644 index 0000000000000000000000000000000000000000..8f08a86e03b7a36d9ece83f1e2e2957ecfe49d8d --- /dev/null +++ b/Documentation/arm/Marvell/README @@ -0,0 +1,232 @@ +ARM Marvell SoCs +================ + +This document lists all the ARM Marvell SoCs that are currently +supported in mainline by the Linux kernel. As the Marvell families of +SoCs are large and complex, it is hard to understand where the support +for a particular SoC is available in the Linux kernel. This document +tries to help in understanding where those SoCs are supported, and to +match them with their corresponding public datasheet, when available. + +Orion family +------------ + + Flavors: + 88F5082 + 88F5181 + 88F5181L + 88F5182 + Datasheet : http://www.embeddedarm.com/documentation/third-party/MV88F5182-datasheet.pdf + Programmer's User Guide : http://www.embeddedarm.com/documentation/third-party/MV88F5182-opensource-manual.pdf + User Manual : http://www.embeddedarm.com/documentation/third-party/MV88F5182-usermanual.pdf + 88F5281 + Datasheet : http://www.ocmodshop.com/images/reviews/networking/qnap_ts409u/marvel_88f5281_data_sheet.pdf + 88F6183 + Core: Feroceon ARMv5 compatible + Linux kernel mach directory: arch/arm/mach-orion5x + Linux kernel plat directory: arch/arm/plat-orion + +Kirkwood family +--------------- + + Flavors: + 88F6282 a.k.a Armada 300 + Product Brief : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf + 88F6283 a.k.a Armada 310 + Product Brief : http://www.marvell.com/embedded-processors/armada-300/assets/armada_310.pdf + 88F6190 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6190-003_WEB.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + 88F6192 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6192-003_ver1.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F619x_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + 88F6182 + 88F6180 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6180-003_ver1.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6180_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + 88F6281 + Product Brief : http://www.marvell.com/embedded-processors/kirkwood/assets/88F6281-004_ver1.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/kirkwood/assets/HW_88F6281_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf + Homepage: http://www.marvell.com/embedded-processors/kirkwood/ + Core: Feroceon ARMv5 compatible + Linux kernel mach directory: arch/arm/mach-kirkwood + Linux kernel plat directory: arch/arm/plat-orion + +Discovery family +---------------- + + Flavors: + MV78100 + Product Brief : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78100-003_WEB.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78100_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf + MV78200 + Product Brief : http://www.marvell.com/embedded-processors/discovery-innovation/assets/MV78200-002_WEB.pdf + Hardware Spec : http://www.marvell.com/embedded-processors/discovery-innovation/assets/HW_MV78200_OpenSource.pdf + Functional Spec: http://www.marvell.com/embedded-processors/discovery-innovation/assets/FS_MV76100_78100_78200_OpenSource.pdf + MV76100 + Not supported by the Linux kernel. + + Core: Feroceon ARMv5 compatible + + Linux kernel mach directory: arch/arm/mach-mv78xx0 + Linux kernel plat directory: arch/arm/plat-orion + +EBU Armada family +----------------- + + Armada 370 Flavors: + 88F6710 + 88F6707 + 88F6W11 + + Armada XP Flavors: + MV78230 + MV78260 + MV78460 + + Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf + No public datasheet available. + + Core: Sheeva ARMv7 compatible + + Linux kernel mach directory: arch/arm/mach-mvebu + Linux kernel plat directory: none + +Avanta family +------------- + + Flavors: + 88F6510 + 88F6530P + 88F6550 + 88F6560 + Homepage : http://www.marvell.com/broadband/ + Product Brief: http://www.marvell.com/broadband/assets/Marvell_Avanta_88F6510_305_060-001_product_brief.pdf + No public datasheet available. + + Core: ARMv5 compatible + + Linux kernel mach directory: no code in mainline yet, planned for the future + Linux kernel plat directory: no code in mainline yet, planned for the future + +Dove family (application processor) +----------------------------------- + + Flavors: + 88AP510 a.k.a Armada 510 + Product Brief : http://www.marvell.com/application-processors/armada-500/assets/Marvell_Armada510_SoC.pdf + Hardware Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Hardware-Spec.pdf + Functional Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf + Homepage: http://www.marvell.com/application-processors/armada-500/ + Core: ARMv7 compatible + Directory: arch/arm/mach-dove + +PXA 2xx/3xx/93x/95x family +-------------------------- + + Flavors: + PXA21x, PXA25x, PXA26x + Application processor only + Core: ARMv5 XScale core + PXA270, PXA271, PXA272 + Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_pb.pdf + Design guide : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_design_guide.pdf + Developers manual : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_dev_man.pdf + Specification : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_emts.pdf + Specification update : http://www.marvell.com/application-processors/pxa-family/assets/pxa_27x_spec_update.pdf + Application processor only + Core: ARMv5 XScale core + PXA300, PXA310, PXA320 + PXA 300 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA300_PB_R4.pdf + PXA 310 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA310_PB_R4.pdf + PXA 320 Product Brief : http://www.marvell.com/application-processors/pxa-family/assets/PXA320_PB_R4.pdf + Design guide : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Design_Guide.pdf + Developers manual : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Developers_Manual.zip + Specifications : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_EMTS.pdf + Specification Update : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_Spec_Update.zip + Reference Manual : http://www.marvell.com/application-processors/pxa-family/assets/PXA3xx_TavorP_BootROM_Ref_Manual.pdf + Application processor only + Core: ARMv5 XScale core + PXA930, PXA935 + Application processor with Communication processor + Core: ARMv5 XScale core + PXA955 + Application processor with Communication processor + Core: ARMv7 compatible Sheeva PJ4 core + + Comments: + + * This line of SoCs originates from the XScale family developed by + Intel and acquired by Marvell in ~2006. The PXA21x, PXA25x, + PXA26x, PXA27x, PXA3xx and PXA93x were developed by Intel, while + the later PXA95x were developed by Marvell. + + * Due to their XScale origin, these SoCs have virtually nothing in + common with the other (Kirkwood, Dove, etc.) families of Marvell + SoCs, except with the MMP/MMP2 family of SoCs. + + Linux kernel mach directory: arch/arm/mach-pxa + Linux kernel plat directory: arch/arm/plat-pxa + +MMP/MMP2 family (communication processor) +----------------------------------------- + + Flavors: + PXA168, a.k.a Armada 168 + Homepage : http://www.marvell.com/application-processors/armada-100/armada-168.jsp + Product brief : http://www.marvell.com/application-processors/armada-100/assets/pxa_168_pb.pdf + Hardware manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_datasheet.pdf + Software manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_software_manual.pdf + Specification update : http://www.marvell.com/application-processors/armada-100/assets/ARMADA16x_Spec_update.pdf + Boot ROM manual : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_ref_manual.pdf + App node package : http://www.marvell.com/application-processors/armada-100/assets/armada_16x_app_note_package.pdf + Application processor only + Core: ARMv5 compatible Marvell PJ1 (Mohawk) + PXA910 + Homepage : http://www.marvell.com/communication-processors/pxa910/ + Product Brief : http://www.marvell.com/communication-processors/pxa910/assets/Marvell_PXA910_Platform-001_PB_final.pdf + Application processor with Communication processor + Core: ARMv5 compatible Marvell PJ1 (Mohawk) + MMP2, a.k.a Armada 610 + Product Brief : http://www.marvell.com/application-processors/armada-600/assets/armada610_pb.pdf + Application processor only + Core: ARMv7 compatible Sheeva PJ4 core + + Comments: + + * This line of SoCs originates from the XScale family developed by + Intel and acquired by Marvell in ~2006. All the processors of + this MMP/MMP2 family were developed by Marvell. + + * Due to their XScale origin, these SoCs have virtually nothing in + common with the other (Kirkwood, Dove, etc.) families of Marvell + SoCs, except with the PXA family of SoCs listed above. + + Linux kernel mach directory: arch/arm/mach-mmp + Linux kernel plat directory: arch/arm/plat-pxa + +Long-term plans +--------------- + + * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ and + mach-kirkwood/ into the mach-mvebu/ to support all SoCs from the + Marvell EBU (Engineering Business Unit) in a single mach- + directory. The plat-orion/ would therefore disappear. + + * Unify the mach-mmp/ and mach-pxa/ into the same mach-pxa + directory. The plat-pxa/ would therefore disappear. + +Credits +------- + + Maen Suleiman + Lior Amsalem + Thomas Petazzoni + Andrew Lunn + Nicolas Pitre + Eric Miao diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt index 816d6071669e75380dc72da99fb9a27739e0a2d8..8b46c79679c47a4577d12eb3de92b3d6f77523ef 100644 --- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt +++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt @@ -1,4 +1,4 @@ - S3C2410 GPIO Control + S3C24XX GPIO Control ==================== Introduction @@ -12,7 +12,7 @@ Introduction of the s3c2410 GPIO system, please read the Samsung provided data-sheet/users manual to find out the complete list. - See Documentation/arm/Samsung/GPIO.txt for the core implemetation. + See Documentation/arm/Samsung/GPIO.txt for the core implementation. GPIOLIB @@ -41,8 +41,8 @@ GPIOLIB GPIOLIB conversion ------------------ -If you need to convert your board or driver to use gpiolib from the exiting -s3c2410 api, then here are some notes on the process. +If you need to convert your board or driver to use gpiolib from the phased +out s3c2410 API, then here are some notes on the process. 1) If your board is exclusively using an GPIO, say to control peripheral power, then it will require to claim the gpio with gpio_request() before @@ -55,7 +55,7 @@ s3c2410 api, then here are some notes on the process. as they have the same arguments, and can either take the pin specific values, or the more generic special-function-number arguments. -3) s3c2410_gpio_pullup() changs have the problem that whilst the +3) s3c2410_gpio_pullup() changes have the problem that whilst the s3c2410_gpio_pullup(x, 1) can be easily translated to the s3c_gpio_setpull(x, S3C_GPIO_PULL_NONE), the s3c2410_gpio_pullup(x, 0) are not so easy. @@ -74,7 +74,7 @@ s3c2410 api, then here are some notes on the process. when using gpio_get_value() on an output pin (s3c2410_gpio_getpin would return the value the pin is supposed to be outputting). -6) s3c2410_gpio_getirq() should be directly replacable with the +6) s3c2410_gpio_getirq() should be directly replaceable with the gpio_to_irq() call. The s3c2410_gpio and gpio_ calls have always operated on the same gpio @@ -105,7 +105,7 @@ PIN Numbers ----------- Each pin has an unique number associated with it in regs-gpio.h, - eg S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell + e.g. S3C2410_GPA(0) or S3C2410_GPF(1). These defines are used to tell the GPIO functions which pin is to be used. With the conversion to gpiolib, there is no longer a direct conversion @@ -120,31 +120,27 @@ Configuring a pin The following function allows the configuration of a given pin to be changed. - void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int function); + void s3c_gpio_cfgpin(unsigned int pin, unsigned int function); - Eg: + e.g.: - s3c2410_gpio_cfgpin(S3C2410_GPA(0), S3C2410_GPA0_ADDR0); - s3c2410_gpio_cfgpin(S3C2410_GPE(8), S3C2410_GPE8_SDDAT1); + s3c_gpio_cfgpin(S3C2410_GPA(0), S3C_GPIO_SFN(1)); + s3c_gpio_cfgpin(S3C2410_GPE(8), S3C_GPIO_SFN(2)); which would turn GPA(0) into the lowest Address line A0, and set GPE(8) to be connected to the SDIO/MMC controller's SDDAT1 line. - The s3c_gpio_cfgpin() call is a functional replacement for this call. - Reading the current configuration --------------------------------- - The current configuration of a pin can be read by using: + The current configuration of a pin can be read by using standard + gpiolib function: - s3c2410_gpio_getcfg(unsigned int pin); + s3c_gpio_getcfg(unsigned int pin); The return value will be from the same set of values which can be - passed to s3c2410_gpio_cfgpin(). - - The s3c_gpio_getcfg() call should be a functional replacement for - this call. + passed to s3c_gpio_cfgpin(). Configuring a pull-up resistor @@ -154,61 +150,33 @@ Configuring a pull-up resistor pull-up resistors enabled. This can be configured by the following function: - void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); - - Where the to value is zero to set the pull-up off, and 1 to enable - the specified pull-up. Any other values are currently undefined. - - The s3c_gpio_setpull() offers similar functionality, but with the - ability to encode whether the pull is up or down. Currently there - is no 'just on' state, so up or down must be selected. - - -Getting the state of a PIN --------------------------- - - The state of a pin can be read by using the function: - - unsigned int s3c2410_gpio_getpin(unsigned int pin); + void s3c_gpio_setpull(unsigned int pin, unsigned int to); - This will return either zero or non-zero. Do not count on this - function returning 1 if the pin is set. + Where the to value is S3C_GPIO_PULL_NONE to set the pull-up off, + and S3C_GPIO_PULL_UP to enable the specified pull-up. Any other + values are currently undefined. - This call is now implemented by the relevant gpiolib calls, convert - your board or driver to use gpiolib. - - -Setting the state of a PIN --------------------------- - - The value an pin is outputing can be modified by using the following: - void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); +Getting and setting the state of a PIN +-------------------------------------- - Which sets the given pin to the value. Use 0 to write 0, and 1 to - set the output to 1. - - This call is now implemented by the relevant gpiolib calls, convert + These calls are now implemented by the relevant gpiolib calls, convert your board or driver to use gpiolib. Getting the IRQ number associated with a PIN -------------------------------------------- - The following function can map the given pin number to an IRQ + A standard gpiolib function can map the given pin number to an IRQ number to pass to the IRQ system. - int s3c2410_gpio_getirq(unsigned int pin); + int gpio_to_irq(unsigned int pin); Note, not all pins have an IRQ. - This call is now implemented by the relevant gpiolib calls, convert - your board or driver to use gpiolib. - -Authour +Author ------- - Ben Dooks, 03 October 2004 Copyright 2004 Ben Dooks, Simtec Electronics diff --git a/Documentation/arm/Samsung/GPIO.txt b/Documentation/arm/Samsung/GPIO.txt index 513f2562c1a3162af49dc01fdb44780b9076b51b..795adfd88081c0aed6d320396825576b014adfb6 100644 --- a/Documentation/arm/Samsung/GPIO.txt +++ b/Documentation/arm/Samsung/GPIO.txt @@ -5,14 +5,14 @@ Introduction ------------ This outlines the Samsung GPIO implementation and the architecture -specific calls provided alongisde the drivers/gpio core. +specific calls provided alongside the drivers/gpio core. S3C24XX (Legacy) ---------------- See Documentation/arm/Samsung-S3C24XX/GPIO.txt for more information -about these devices. Their implementation is being brought into line +about these devices. Their implementation has been brought into line with the core samsung implementation described in this document. @@ -29,7 +29,7 @@ GPIO numbering is synchronised between the Samsung and gpiolib system. PIN configuration ----------------- -Pin configuration is specific to the Samsung architecutre, with each SoC +Pin configuration is specific to the Samsung architecture, with each SoC registering the necessary information for the core gpio configuration implementation to configure pins as necessary. @@ -38,5 +38,3 @@ driver or machine to change gpio configuration. See arch/arm/plat-samsung/include/plat/gpio-cfg.h for more information on these functions. - - diff --git a/Documentation/arm/memory.txt b/Documentation/arm/memory.txt index 208a2d465b922ec826049243abc8c6ac2a724813..4bfb9ffbdbc1d2b389025c9c0e5d9c5402a36a29 100644 --- a/Documentation/arm/memory.txt +++ b/Documentation/arm/memory.txt @@ -51,6 +51,9 @@ ffc00000 ffefffff DMA memory mapping region. Memory returned ff000000 ffbfffff Reserved for future expansion of DMA mapping region. +fee00000 feffffff Mapping of PCI I/O space. This is a static + mapping within the vmalloc space. + VMALLOC_START VMALLOC_END-1 vmalloc() / ioremap() space. Memory returned by vmalloc/ioremap will be dynamically placed in this region. diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt new file mode 100644 index 0000000000000000000000000000000000000000..9c4d388daddc2f32411cdf341a8c7649079cbba6 --- /dev/null +++ b/Documentation/arm64/booting.txt @@ -0,0 +1,152 @@ + Booting AArch64 Linux + ===================== + +Author: Will Deacon +Date : 07 September 2012 + +This document is based on the ARM booting document by Russell King and +is relevant to all public releases of the AArch64 Linux kernel. + +The AArch64 exception model is made up of a number of exception levels +(EL0 - EL3), with EL0 and EL1 having a secure and a non-secure +counterpart. EL2 is the hypervisor level and exists only in non-secure +mode. EL3 is the highest priority level and exists only in secure mode. + +For the purposes of this document, we will use the term `boot loader' +simply to define all software that executes on the CPU(s) before control +is passed to the Linux kernel. This may include secure monitor and +hypervisor code, or it may just be a handful of instructions for +preparing a minimal boot environment. + +Essentially, the boot loader should provide (as a minimum) the +following: + +1. Setup and initialise the RAM +2. Setup the device tree +3. Decompress the kernel image +4. Call the kernel image + + +1. Setup and initialise RAM +--------------------------- + +Requirement: MANDATORY + +The boot loader is expected to find and initialise all RAM that the +kernel will use for volatile data storage in the system. It performs +this in a machine dependent manner. (It may use internal algorithms +to automatically locate and size all RAM, or it may use knowledge of +the RAM in the machine, or any other method the boot loader designer +sees fit.) + + +2. Setup the device tree +------------------------- + +Requirement: MANDATORY + +The device tree blob (dtb) must be no bigger than 2 megabytes in size +and placed at a 2-megabyte boundary within the first 512 megabytes from +the start of the kernel image. This is to allow the kernel to map the +blob using a single section mapping in the initial page tables. + + +3. Decompress the kernel image +------------------------------ + +Requirement: OPTIONAL + +The AArch64 kernel does not currently provide a decompressor and +therefore requires decompression (gzip etc.) to be performed by the boot +loader if a compressed Image target (e.g. Image.gz) is used. For +bootloaders that do not implement this requirement, the uncompressed +Image target is available instead. + + +4. Call the kernel image +------------------------ + +Requirement: MANDATORY + +The decompressed kernel image contains a 32-byte header as follows: + + u32 magic = 0x14000008; /* branch to stext, little-endian */ + u32 res0 = 0; /* reserved */ + u64 text_offset; /* Image load offset */ + u64 res1 = 0; /* reserved */ + u64 res2 = 0; /* reserved */ + +The image must be placed at the specified offset (currently 0x80000) +from the start of the system RAM and called there. The start of the +system RAM must be aligned to 2MB. + +Before jumping into the kernel, the following conditions must be met: + +- Quiesce all DMA capable devices so that memory does not get + corrupted by bogus network packets or disk data. This will save + you many hours of debug. + +- Primary CPU general-purpose register settings + x0 = physical address of device tree blob (dtb) in system RAM. + x1 = 0 (reserved for future use) + x2 = 0 (reserved for future use) + x3 = 0 (reserved for future use) + +- CPU mode + All forms of interrupts must be masked in PSTATE.DAIF (Debug, SError, + IRQ and FIQ). + The CPU must be in either EL2 (RECOMMENDED in order to have access to + the virtualisation extensions) or non-secure EL1. + +- Caches, MMUs + The MMU must be off. + Instruction cache may be on or off. + Data cache must be off and invalidated. + External caches (if present) must be configured and disabled. + +- Architected timers + CNTFRQ must be programmed with the timer frequency. + If entering the kernel at EL1, CNTHCTL_EL2 must have EL1PCTEN (bit 0) + set where available. + +- Coherency + All CPUs to be booted by the kernel must be part of the same coherency + domain on entry to the kernel. This may require IMPLEMENTATION DEFINED + initialisation to enable the receiving of maintenance operations on + each CPU. + +- System registers + All writable architected system registers at the exception level where + the kernel image will be entered must be initialised by software at a + higher exception level to prevent execution in an UNKNOWN state. + +The boot loader is expected to enter the kernel on each CPU in the +following manner: + +- The primary CPU must jump directly to the first instruction of the + kernel image. The device tree blob passed by this CPU must contain + for each CPU node: + + 1. An 'enable-method' property. Currently, the only supported value + for this field is the string "spin-table". + + 2. A 'cpu-release-addr' property identifying a 64-bit, + zero-initialised memory location. + + It is expected that the bootloader will generate these device tree + properties and insert them into the blob prior to kernel entry. + +- Any secondary CPUs must spin outside of the kernel in a reserved area + of memory (communicated to the kernel by a /memreserve/ region in the + device tree) polling their cpu-release-addr location, which must be + contained in the reserved region. A wfe instruction may be inserted + to reduce the overhead of the busy-loop and a sev will be issued by + the primary CPU. When a read of the location pointed to by the + cpu-release-addr returns a non-zero value, the CPU must jump directly + to this value. + +- Secondary CPU general-purpose register settings + x0 = 0 (reserved for future use) + x1 = 0 (reserved for future use) + x2 = 0 (reserved for future use) + x3 = 0 (reserved for future use) diff --git a/Documentation/arm64/memory.txt b/Documentation/arm64/memory.txt new file mode 100644 index 0000000000000000000000000000000000000000..dbbdcbba75a34005ced4edea51e7a9a308aec1e6 --- /dev/null +++ b/Documentation/arm64/memory.txt @@ -0,0 +1,73 @@ + Memory Layout on AArch64 Linux + ============================== + +Author: Catalin Marinas +Date : 20 February 2012 + +This document describes the virtual memory layout used by the AArch64 +Linux kernel. The architecture allows up to 4 levels of translation +tables with a 4KB page size and up to 3 levels with a 64KB page size. + +AArch64 Linux uses 3 levels of translation tables with the 4KB page +configuration, allowing 39-bit (512GB) virtual addresses for both user +and kernel. With 64KB pages, only 2 levels of translation tables are +used but the memory layout is the same. + +User addresses have bits 63:39 set to 0 while the kernel addresses have +the same bits set to 1. TTBRx selection is given by bit 63 of the +virtual address. The swapper_pg_dir contains only kernel (global) +mappings while the user pgd contains only user (non-global) mappings. +The swapper_pgd_dir address is written to TTBR1 and never written to +TTBR0. + + +AArch64 Linux memory layout: + +Start End Size Use +----------------------------------------------------------------------- +0000000000000000 0000007fffffffff 512GB user + +ffffff8000000000 ffffffbbfffcffff ~240GB vmalloc + +ffffffbbfffd0000 ffffffbcfffdffff 64KB [guard page] + +ffffffbbfffe0000 ffffffbcfffeffff 64KB PCI I/O space + +ffffffbbffff0000 ffffffbcffffffff 64KB [guard page] + +ffffffbc00000000 ffffffbdffffffff 8GB vmemmap + +ffffffbe00000000 ffffffbffbffffff ~8GB [guard, future vmmemap] + +ffffffbffc000000 ffffffbfffffffff 64MB modules + +ffffffc000000000 ffffffffffffffff 256GB memory + + +Translation table lookup with 4KB pages: + ++--------+--------+--------+--------+--------+--------+--------+--------+ +|63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0| ++--------+--------+--------+--------+--------+--------+--------+--------+ + | | | | | | + | | | | | v + | | | | | [11:0] in-page offset + | | | | +-> [20:12] L3 index + | | | +-----------> [29:21] L2 index + | | +---------------------> [38:30] L1 index + | +-------------------------------> [47:39] L0 index (not used) + +-------------------------------------------------> [63] TTBR0/1 + + +Translation table lookup with 64KB pages: + ++--------+--------+--------+--------+--------+--------+--------+--------+ +|63 56|55 48|47 40|39 32|31 24|23 16|15 8|7 0| ++--------+--------+--------+--------+--------+--------+--------+--------+ + | | | | | + | | | | v + | | | | [15:0] in-page offset + | | | +----------> [28:16] L3 index + | | +--------------------------> [41:29] L2 index (only 38:29 used) + | +-------------------------------> [47:42] L1 index (not used) + +-------------------------------------------------> [63] TTBR0/1 diff --git a/Documentation/block/00-INDEX b/Documentation/block/00-INDEX index d111e3b23db0bbc0bdf23d81c27e74158ccd9a66..d18ecd827c408d0fb42a8d8a7fc669ce88c95fc2 100644 --- a/Documentation/block/00-INDEX +++ b/Documentation/block/00-INDEX @@ -3,15 +3,21 @@ biodoc.txt - Notes on the Generic Block Layer Rewrite in Linux 2.5 capability.txt - - Generic Block Device Capability (/sys/block//capability) + - Generic Block Device Capability (/sys/block//capability) +cfq-iosched.txt + - CFQ IO scheduler tunables +data-integrity.txt + - Block data integrity deadline-iosched.txt - Deadline IO scheduler tunables ioprio.txt - Block io priorities (in CFQ scheduler) +queue-sysfs.txt + - Queue's sysfs entries request.txt - The members of struct request (in include/linux/blkdev.h) stat.txt - - Block layer statistics in /sys/block//stat + - Block layer statistics in /sys/block//stat switching-sched.txt - Switching I/O schedulers at runtime writeback_cache_control.txt diff --git a/Documentation/block/cfq-iosched.txt b/Documentation/block/cfq-iosched.txt index 6d670f570451a14c1ce4f8c2eb1c69d52736ee01..d89b4fe724d75393a003b33c22bf531252c29672 100644 --- a/Documentation/block/cfq-iosched.txt +++ b/Documentation/block/cfq-iosched.txt @@ -1,3 +1,14 @@ +CFQ (Complete Fairness Queueing) +=============================== + +The main aim of CFQ scheduler is to provide a fair allocation of the disk +I/O bandwidth for all the processes which requests an I/O operation. + +CFQ maintains the per process queue for the processes which request I/O +operation(syncronous requests). In case of asynchronous requests, all the +requests from all the processes are batched together according to their +process's I/O priority. + CFQ ioscheduler tunables ======================== @@ -25,6 +36,72 @@ there are multiple spindles behind single LUN (Host based hardware RAID controller or for storage arrays), setting slice_idle=0 might end up in better throughput and acceptable latencies. +back_seek_max +------------- +This specifies, given in Kbytes, the maximum "distance" for backward seeking. +The distance is the amount of space from the current head location to the +sectors that are backward in terms of distance. + +This parameter allows the scheduler to anticipate requests in the "backward" +direction and consider them as being the "next" if they are within this +distance from the current head location. + +back_seek_penalty +----------------- +This parameter is used to compute the cost of backward seeking. If the +backward distance of request is just 1/back_seek_penalty from a "front" +request, then the seeking cost of two requests is considered equivalent. + +So scheduler will not bias toward one or the other request (otherwise scheduler +will bias toward front request). Default value of back_seek_penalty is 2. + +fifo_expire_async +----------------- +This parameter is used to set the timeout of asynchronous requests. Default +value of this is 248ms. + +fifo_expire_sync +---------------- +This parameter is used to set the timeout of synchronous requests. Default +value of this is 124ms. In case to favor synchronous requests over asynchronous +one, this value should be decreased relative to fifo_expire_async. + +slice_async +----------- +This parameter is same as of slice_sync but for asynchronous queue. The +default value is 40ms. + +slice_async_rq +-------------- +This parameter is used to limit the dispatching of asynchronous request to +device request queue in queue's slice time. The maximum number of request that +are allowed to be dispatched also depends upon the io priority. Default value +for this is 2. + +slice_sync +---------- +When a queue is selected for execution, the queues IO requests are only +executed for a certain amount of time(time_slice) before switching to another +queue. This parameter is used to calculate the time slice of synchronous +queue. + +time_slice is computed using the below equation:- +time_slice = slice_sync + (slice_sync/5 * (4 - prio)). To increase the +time_slice of synchronous queue, increase the value of slice_sync. Default +value is 100ms. + +quantum +------- +This specifies the number of request dispatched to the device queue. In a +queue's time slice, a request will not be dispatched if the number of request +in the device exceeds this parameter. This parameter is used for synchronous +request. + +In case of storage with several disk, this setting can limit the parallel +processing of request. Therefore, increasing the value can imporve the +performace although this can cause the latency of some I/O to increase due +to more number of requests. + CFQ IOPS Mode for group scheduling =================================== Basic CFQ design is to provide priority based time slices. Higher priority diff --git a/Documentation/block/queue-sysfs.txt b/Documentation/block/queue-sysfs.txt index 6518a55273e7094f62f84a5d83467fd96b26fd26..e54ac1d53403094c59e019b1f5e5397e8f4f637d 100644 --- a/Documentation/block/queue-sysfs.txt +++ b/Documentation/block/queue-sysfs.txt @@ -9,20 +9,71 @@ These files are the ones found in the /sys/block/xxx/queue/ directory. Files denoted with a RO postfix are readonly and the RW postfix means read-write. +add_random (RW) +---------------- +This file allows to trun off the disk entropy contribution. Default +value of this file is '1'(on). + +discard_granularity (RO) +----------------------- +This shows the size of internal allocation of the device in bytes, if +reported by the device. A value of '0' means device does not support +the discard functionality. + +discard_max_bytes (RO) +---------------------- +Devices that support discard functionality may have internal limits on +the number of bytes that can be trimmed or unmapped in a single operation. +The discard_max_bytes parameter is set by the device driver to the maximum +number of bytes that can be discarded in a single operation. Discard +requests issued to the device must not exceed this limit. A discard_max_bytes +value of 0 means that the device does not support discard functionality. + +discard_zeroes_data (RO) +------------------------ +When read, this file will show if the discarded block are zeroed by the +device or not. If its value is '1' the blocks are zeroed otherwise not. + hw_sector_size (RO) ------------------- This is the hardware sector size of the device, in bytes. +iostats (RW) +------------- +This file is used to control (on/off) the iostats accounting of the +disk. + +logical_block_size (RO) +----------------------- +This is the logcal block size of the device, in bytes. + max_hw_sectors_kb (RO) ---------------------- This is the maximum number of kilobytes supported in a single data transfer. +max_integrity_segments (RO) +--------------------------- +When read, this file shows the max limit of integrity segments as +set by block layer which a hardware controller can handle. + max_sectors_kb (RW) ------------------- This is the maximum number of kilobytes that the block layer will allow for a filesystem request. Must be smaller than or equal to the maximum size allowed by the hardware. +max_segments (RO) +----------------- +Maximum number of segments of the device. + +max_segment_size (RO) +--------------------- +Maximum segment size of the device. + +minimum_io_size (RO) +-------------------- +This is the smallest preferred io size reported by the device. + nomerges (RW) ------------- This enables the user to disable the lookup logic involved with IO @@ -45,11 +96,24 @@ per-block-cgroup request pool. IOW, if there are N block cgroups, each request queue may have upto N request pools, each independently regulated by nr_requests. +optimal_io_size (RO) +-------------------- +This is the optimal io size reported by the device. + +physical_block_size (RO) +------------------------ +This is the physical block size of device, in bytes. + read_ahead_kb (RW) ------------------ Maximum number of kilobytes to read-ahead for filesystems on this block device. +rotational (RW) +--------------- +This file is used to stat if the device is of rotational type or +non-rotational type. + rq_affinity (RW) ---------------- If this option is '1', the block layer will migrate request completions to the diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index 4a0b64c605fc83cef8c945a76d08554c625dc746..9e04196c4d781f5a411b2afd329876bd255b77e4 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -29,7 +29,8 @@ CONTENTS: 3.1 Overview 3.2 Synchronization 3.3 Subsystem API -4. Questions +4. Extended attributes usage +5. Questions 1. Control Groups ================= @@ -62,9 +63,9 @@ an instance of the cgroup virtual filesystem associated with it. At any one time there may be multiple active hierarchies of task cgroups. Each hierarchy is a partition of all tasks in the system. -User level code may create and destroy cgroups by name in an +User-level code may create and destroy cgroups by name in an instance of the cgroup virtual file system, specify and query to -which cgroup a task is assigned, and list the task pids assigned to +which cgroup a task is assigned, and list the task PIDs assigned to a cgroup. Those creations and assignments only affect the hierarchy associated with that instance of the cgroup file system. @@ -72,7 +73,7 @@ On their own, the only use for cgroups is for simple job tracking. The intention is that other subsystems hook into the generic cgroup support to provide new attributes for cgroups, such as accounting/limiting the resources which processes in a cgroup can -access. For example, cpusets (see Documentation/cgroups/cpusets.txt) allows +access. For example, cpusets (see Documentation/cgroups/cpusets.txt) allow you to associate a set of CPUs and a set of memory nodes with the tasks in each cgroup. @@ -80,11 +81,11 @@ tasks in each cgroup. ---------------------------- There are multiple efforts to provide process aggregations in the -Linux kernel, mainly for resource tracking purposes. Such efforts +Linux kernel, mainly for resource-tracking purposes. Such efforts include cpusets, CKRM/ResGroups, UserBeanCounters, and virtual server namespaces. These all require the basic notion of a grouping/partitioning of processes, with newly forked processes ending -in the same group (cgroup) as their parent process. +up in the same group (cgroup) as their parent process. The kernel cgroup patch provides the minimum essential kernel mechanisms required to efficiently implement such groups. It has @@ -127,14 +128,14 @@ following lines: / \ Professors (15%) students (5%) -Browsers like Firefox/Lynx go into the WWW network class, while (k)nfsd go -into NFS network class. +Browsers like Firefox/Lynx go into the WWW network class, while (k)nfsd goes +into the NFS network class. At the same time Firefox/Lynx will share an appropriate CPU/Memory class depending on who launched it (prof/student). With the ability to classify tasks differently for different resources -(by putting those resource subsystems in different hierarchies) then +(by putting those resource subsystems in different hierarchies), the admin can easily set up a script which receives exec notifications and depending on who is launching the browser he can @@ -145,19 +146,19 @@ a separate cgroup for every browser launched and associate it with appropriate network and other resource class. This may lead to proliferation of such cgroups. -Also lets say that the administrator would like to give enhanced network +Also let's say that the administrator would like to give enhanced network access temporarily to a student's browser (since it is night and the user -wants to do online gaming :)) OR give one of the students simulation -apps enhanced CPU power, +wants to do online gaming :)) OR give one of the student's simulation +apps enhanced CPU power. -With ability to write pids directly to resource classes, it's just a -matter of : +With ability to write PIDs directly to resource classes, it's just a +matter of: # echo pid > /sys/fs/cgroup/network//tasks (after some time) # echo pid > /sys/fs/cgroup/network//tasks -Without this ability, he would have to split the cgroup into +Without this ability, the administrator would have to split the cgroup into multiple separate ones and then associate the new cgroups with the new resource classes. @@ -184,20 +185,20 @@ Control Groups extends the kernel as follows: field of each task_struct using the css_set, anchored at css_set->tasks. - - A cgroup hierarchy filesystem can be mounted for browsing and + - A cgroup hierarchy filesystem can be mounted for browsing and manipulation from user space. - - You can list all the tasks (by pid) attached to any cgroup. + - You can list all the tasks (by PID) attached to any cgroup. The implementation of cgroups requires a few, simple hooks -into the rest of the kernel, none in performance critical paths: +into the rest of the kernel, none in performance-critical paths: - in init/main.c, to initialize the root cgroups and initial css_set at system boot. - in fork and exit, to attach and detach a task from its css_set. -In addition a new file system, of type "cgroup" may be mounted, to +In addition, a new file system of type "cgroup" may be mounted, to enable browsing and modifying the cgroups presently known to the kernel. When mounting a cgroup hierarchy, you may specify a comma-separated list of subsystems to mount as the filesystem mount @@ -230,13 +231,13 @@ as the path relative to the root of the cgroup file system. Each cgroup is represented by a directory in the cgroup file system containing the following files describing that cgroup: - - tasks: list of tasks (by pid) attached to that cgroup. This list - is not guaranteed to be sorted. Writing a thread id into this file + - tasks: list of tasks (by PID) attached to that cgroup. This list + is not guaranteed to be sorted. Writing a thread ID into this file moves the thread into this cgroup. - - cgroup.procs: list of tgids in the cgroup. This list is not - guaranteed to be sorted or free of duplicate tgids, and userspace + - cgroup.procs: list of thread group IDs in the cgroup. This list is + not guaranteed to be sorted or free of duplicate TGIDs, and userspace should sort/uniquify the list if this property is required. - Writing a thread group id into this file moves all threads in that + Writing a thread group ID into this file moves all threads in that group into this cgroup. - notify_on_release flag: run the release agent on exit? - release_agent: the path to use for release notifications (this file @@ -261,7 +262,7 @@ cgroup file system directories. When a task is moved from one cgroup to another, it gets a new css_set pointer - if there's an already existing css_set with the -desired collection of cgroups then that group is reused, else a new +desired collection of cgroups then that group is reused, otherwise a new css_set is allocated. The appropriate existing css_set is located by looking into a hash table. @@ -292,7 +293,7 @@ file system) of the abandoned cgroup. This enables automatic removal of abandoned cgroups. The default value of notify_on_release in the root cgroup at system boot is disabled (0). The default value of other cgroups at creation is the current -value of their parents notify_on_release setting. The default value of +value of their parents' notify_on_release settings. The default value of a cgroup hierarchy's release_agent path is empty. 1.5 What does clone_children do ? @@ -316,7 +317,7 @@ the "cpuset" cgroup subsystem, the steps are something like: 4) Create the new cgroup by doing mkdir's and write's (or echo's) in the /sys/fs/cgroup virtual file system. 5) Start a task that will be the "founding father" of the new job. - 6) Attach that task to the new cgroup by writing its pid to the + 6) Attach that task to the new cgroup by writing its PID to the /sys/fs/cgroup/cpuset/tasks file for that cgroup. 7) fork, exec or clone the job tasks from this founding father task. @@ -344,7 +345,7 @@ and then start a subshell 'sh' in that cgroup: 2.1 Basic Usage --------------- -Creating, modifying, using the cgroups can be done through the cgroup +Creating, modifying, using cgroups can be done through the cgroup virtual filesystem. To mount a cgroup hierarchy with all available subsystems, type: @@ -441,7 +442,7 @@ You can attach the current shell task by echoing 0: # echo 0 > tasks You can use the cgroup.procs file instead of the tasks file to move all -threads in a threadgroup at once. Echoing the pid of any task in a +threads in a threadgroup at once. Echoing the PID of any task in a threadgroup to cgroup.procs causes all tasks in that threadgroup to be be attached to the cgroup. Writing 0 to cgroup.procs moves all tasks in the writing task's threadgroup. @@ -479,7 +480,7 @@ in /proc/mounts and /proc//cgroups. There is mechanism which allows to get notifications about changing status of a cgroup. -To register new notification handler you need: +To register a new notification handler you need to: - create a file descriptor for event notification using eventfd(2); - open a control file to be monitored (e.g. memory.usage_in_bytes); - write " " to cgroup.event_control. @@ -488,7 +489,7 @@ To register new notification handler you need: eventfd will be woken up by control file implementation or when the cgroup is removed. -To unregister notification handler just close eventfd. +To unregister a notification handler just close eventfd. NOTE: Support of notifications should be implemented for the control file. See documentation for the subsystem. @@ -502,7 +503,7 @@ file. See documentation for the subsystem. Each kernel subsystem that wants to hook into the generic cgroup system needs to create a cgroup_subsys object. This contains various methods, which are callbacks from the cgroup system, along -with a subsystem id which will be assigned by the cgroup system. +with a subsystem ID which will be assigned by the cgroup system. Other fields in the cgroup_subsys object include: @@ -516,7 +517,7 @@ Other fields in the cgroup_subsys object include: at system boot. Each cgroup object created by the system has an array of pointers, -indexed by subsystem id; this pointer is entirely managed by the +indexed by subsystem ID; this pointer is entirely managed by the subsystem; the generic cgroup code will never touch this pointer. 3.2 Synchronization @@ -639,7 +640,7 @@ void post_clone(struct cgroup *cgrp) Called during cgroup_create() to do any parameter initialization which might be required before a task could attach. For -example in cpusets, no task may attach before 'cpus' and 'mems' are set +example, in cpusets, no task may attach before 'cpus' and 'mems' are set up. void bind(struct cgroup *root) @@ -650,7 +651,26 @@ and root cgroup. Currently this will only involve movement between the default hierarchy (which never has sub-cgroups) and a hierarchy that is being created/destroyed (and hence has no sub-cgroups). -4. Questions +4. Extended attribute usage +=========================== + +cgroup filesystem supports certain types of extended attributes in its +directories and files. The current supported types are: + - Trusted (XATTR_TRUSTED) + - Security (XATTR_SECURITY) + +Both require CAP_SYS_ADMIN capability to set. + +Like in tmpfs, the extended attributes in cgroup filesystem are stored +using kernel memory and it's advised to keep the usage at minimum. This +is the reason why user defined extended attributes are not supported, since +any user can do it and there's no limit in the value size. + +The current known users for this feature are SELinux to limit cgroup usage +in containers and systemd for assorted meta data like main PID in a cgroup +(systemd creates a cgroup per service). + +5. Questions ============ Q: what's up with this '/bin/echo' ? @@ -660,5 +680,5 @@ A: bash's builtin 'echo' command does not check calls to write() against Q: When I attach processes, only the first of the line gets really attached ! A: We can only return one error code per call to write(). So you should also - put only ONE pid. + put only ONE PID. diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index 4372e6b8a353f3dce002ac32b84b6dd3b53a8e31..c07f7b4fb88d162ad012e69a3d77aa90d62868ff 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -18,16 +18,16 @@ from the rest of the system. The article on LWN [12] mentions some probable uses of the memory controller. The memory controller can be used to a. Isolate an application or a group of applications - Memory hungry applications can be isolated and limited to a smaller + Memory-hungry applications can be isolated and limited to a smaller amount of memory. -b. Create a cgroup with limited amount of memory, this can be used +b. Create a cgroup with a limited amount of memory; this can be used as a good alternative to booting with mem=XXXX. c. Virtualization solutions can control the amount of memory they want to assign to a virtual machine instance. d. A CD/DVD burner could control the amount of memory used by the rest of the system to ensure that burning does not fail due to lack of available memory. -e. There are several other use cases, find one or use the controller just +e. There are several other use cases; find one or use the controller just for fun (to learn and hack on the VM subsystem). Current Status: linux-2.6.34-mmotm(development version of 2010/April) @@ -38,12 +38,12 @@ Features: - optionally, memory+swap usage can be accounted and limited. - hierarchical accounting - soft limit - - moving(recharging) account at moving a task is selectable. + - moving (recharging) account at moving a task is selectable. - usage threshold notifier - oom-killer disable knob and oom-notifier - Root cgroup has no limit controls. - Kernel memory support is work in progress, and the current version provides + Kernel memory support is a work in progress, and the current version provides basically functionality. (See Section 2.7) Brief summary of control files. @@ -144,9 +144,9 @@ Figure 1 shows the important aspects of the controller 3. Each page has a pointer to the page_cgroup, which in turn knows the cgroup it belongs to -The accounting is done as follows: mem_cgroup_charge() is invoked to setup +The accounting is done as follows: mem_cgroup_charge() is invoked to set up the necessary data structures and check if the cgroup that is being charged -is over its limit. If it is then reclaim is invoked on the cgroup. +is over its limit. If it is, then reclaim is invoked on the cgroup. More details can be found in the reclaim section of this document. If everything goes well, a page meta-data-structure called page_cgroup is updated. page_cgroup has its own LRU on cgroup. @@ -163,13 +163,13 @@ for earlier. A file page will be accounted for as Page Cache when it's inserted into inode (radix-tree). While it's mapped into the page tables of processes, duplicate accounting is carefully avoided. -A RSS page is unaccounted when it's fully unmapped. A PageCache page is +An RSS page is unaccounted when it's fully unmapped. A PageCache page is unaccounted when it's removed from radix-tree. Even if RSS pages are fully unmapped (by kswapd), they may exist as SwapCache in the system until they -are really freed. Such SwapCaches also also accounted. +are really freed. Such SwapCaches are also accounted. A swapped-in page is not accounted until it's mapped. -Note: The kernel does swapin-readahead and read multiple swaps at once. +Note: The kernel does swapin-readahead and reads multiple swaps at once. This means swapped-in pages may contain pages for other tasks than a task causing page fault. So, we avoid accounting at swap-in I/O. @@ -209,7 +209,7 @@ memsw.limit_in_bytes. Example: Assume a system with 4G of swap. A task which allocates 6G of memory (by mistake) under 2G memory limitation will use all swap. In this case, setting memsw.limit_in_bytes=3G will prevent bad use of swap. -By using memsw limit, you can avoid system OOM which can be caused by swap +By using the memsw limit, you can avoid system OOM which can be caused by swap shortage. * why 'memory+swap' rather than swap. @@ -217,7 +217,7 @@ The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of memory+swap. In other words, when we want to limit the usage of swap without affecting global LRU, memory+swap limit is better than just limiting swap from -OS point of view. +an OS point of view. * What happens when a cgroup hits memory.memsw.limit_in_bytes When a cgroup hits memory.memsw.limit_in_bytes, it's useless to do swap-out @@ -236,7 +236,7 @@ an OOM routine is invoked to select and kill the bulkiest task in the cgroup. (See 10. OOM Control below.) The reclaim algorithm has not been modified for cgroups, except that -pages that are selected for reclaiming come from the per cgroup LRU +pages that are selected for reclaiming come from the per-cgroup LRU list. NOTE: Reclaim does not work for the root cgroup, since we cannot set any @@ -316,7 +316,7 @@ We can check the usage: # cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes 1216512 -A successful write to this file does not guarantee a successful set of +A successful write to this file does not guarantee a successful setting of this limit to the value written into the file. This can be due to a number of factors, such as rounding up to page boundaries or the total availability of memory on the system. The user is required to re-read @@ -350,7 +350,7 @@ Trying usual test under memory controller is always helpful. 4.1 Troubleshooting Sometimes a user might find that the application under a cgroup is -terminated by OOM killer. There are several causes for this: +terminated by the OOM killer. There are several causes for this: 1. The cgroup limit is too low (just too low to do anything useful) 2. The user is using anonymous memory and swap is turned off or too low @@ -358,7 +358,7 @@ terminated by OOM killer. There are several causes for this: A sync followed by echo 1 > /proc/sys/vm/drop_caches will help get rid of some of the pages cached in the cgroup (page cache pages). -To know what happens, disable OOM_Kill by 10. OOM Control(see below) and +To know what happens, disabling OOM_Kill as per "10. OOM Control" (below) and seeing what happens will be helpful. 4.2 Task migration @@ -399,10 +399,10 @@ About use_hierarchy, see Section 6. Almost all pages tracked by this memory cgroup will be unmapped and freed. Some pages cannot be freed because they are locked or in-use. Such pages are - moved to parent(if use_hierarchy==1) or root (if use_hierarchy==0) and this + moved to parent (if use_hierarchy==1) or root (if use_hierarchy==0) and this cgroup will be empty. - Typical use case of this interface is that calling this before rmdir(). + The typical use case for this interface is before calling rmdir(). Because rmdir() moves all pages to parent, some out-of-use page caches can be moved to the parent. If you want to avoid that, force_empty will be useful. @@ -486,7 +486,7 @@ You can reset failcnt by writing 0 to failcnt file. For efficiency, as other kernel components, memory cgroup uses some optimization to avoid unnecessary cacheline false sharing. usage_in_bytes is affected by the -method and doesn't show 'exact' value of memory(and swap) usage, it's an fuzz +method and doesn't show 'exact' value of memory (and swap) usage, it's a fuzz value for efficient access. (Of course, when necessary, it's synchronized.) If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP) value in memory.stat(see 5.2). @@ -496,8 +496,8 @@ value in memory.stat(see 5.2). This is similar to numa_maps but operates on a per-memcg basis. This is useful for providing visibility into the numa locality information within an memcg since the pages are allowed to be allocated from any physical -node. One of the usecases is evaluating application performance by -combining this information with the application's cpu allocation. +node. One of the use cases is evaluating application performance by +combining this information with the application's CPU allocation. We export "total", "file", "anon" and "unevictable" pages per-node for each memcg. The ouput format of memory.numa_stat is: @@ -561,10 +561,10 @@ are pushed back to their soft limits. If the soft limit of each control group is very high, they are pushed back as much as possible to make sure that one control group does not starve the others of memory. -Please note that soft limits is a best effort feature, it comes with +Please note that soft limits is a best-effort feature; it comes with no guarantees, but it does its best to make sure that when memory is heavily contended for, memory is allocated based on the soft limit -hints/setup. Currently soft limit based reclaim is setup such that +hints/setup. Currently soft limit based reclaim is set up such that it gets invoked from balance_pgdat (kswapd). 7.1 Interface @@ -592,7 +592,7 @@ page tables. 8.1 Interface -This feature is disabled by default. It can be enabled(and disabled again) by +This feature is disabled by default. It can be enabledi (and disabled again) by writing to memory.move_charge_at_immigrate of the destination cgroup. If you want to enable it: @@ -601,8 +601,8 @@ If you want to enable it: Note: Each bits of move_charge_at_immigrate has its own meaning about what type of charges should be moved. See 8.2 for details. -Note: Charges are moved only when you move mm->owner, IOW, a leader of a thread - group. +Note: Charges are moved only when you move mm->owner, in other words, + a leader of a thread group. Note: If we cannot find enough space for the task in the destination cgroup, we try to make space by reclaiming memory. Task migration may fail if we cannot make enough space. @@ -612,25 +612,25 @@ And if you want disable it again: # echo 0 > memory.move_charge_at_immigrate -8.2 Type of charges which can be move +8.2 Type of charges which can be moved -Each bits of move_charge_at_immigrate has its own meaning about what type of -charges should be moved. But in any cases, it must be noted that an account of -a page or a swap can be moved only when it is charged to the task's current(old) -memory cgroup. +Each bit in move_charge_at_immigrate has its own meaning about what type of +charges should be moved. But in any case, it must be noted that an account of +a page or a swap can be moved only when it is charged to the task's current +(old) memory cgroup. bit | what type of charges would be moved ? -----+------------------------------------------------------------------------ - 0 | A charge of an anonymous page(or swap of it) used by the target task. - | You must enable Swap Extension(see 2.4) to enable move of swap charges. + 0 | A charge of an anonymous page (or swap of it) used by the target task. + | You must enable Swap Extension (see 2.4) to enable move of swap charges. -----+------------------------------------------------------------------------ - 1 | A charge of file pages(normal file, tmpfs file(e.g. ipc shared memory) + 1 | A charge of file pages (normal file, tmpfs file (e.g. ipc shared memory) | and swaps of tmpfs file) mmapped by the target task. Unlike the case of - | anonymous pages, file pages(and swaps) in the range mmapped by the task + | anonymous pages, file pages (and swaps) in the range mmapped by the task | will be moved even if the task hasn't done page fault, i.e. they might | not be the task's "RSS", but other task's "RSS" that maps the same file. - | And mapcount of the page is ignored(the page can be moved even if - | page_mapcount(page) > 1). You must enable Swap Extension(see 2.4) to + | And mapcount of the page is ignored (the page can be moved even if + | page_mapcount(page) > 1). You must enable Swap Extension (see 2.4) to | enable move of swap charges. 8.3 TODO @@ -640,11 +640,11 @@ memory cgroup. 9. Memory thresholds -Memory cgroup implements memory thresholds using cgroups notification +Memory cgroup implements memory thresholds using the cgroups notification API (see cgroups.txt). It allows to register multiple memory and memsw thresholds and gets notifications when it crosses. -To register a threshold application need: +To register a threshold, an application must: - create an eventfd using eventfd(2); - open memory.usage_in_bytes or memory.memsw.usage_in_bytes; - write string like " " to @@ -659,24 +659,24 @@ It's applicable for root and non-root cgroup. memory.oom_control file is for OOM notification and other controls. -Memory cgroup implements OOM notifier using cgroup notification +Memory cgroup implements OOM notifier using the cgroup notification API (See cgroups.txt). It allows to register multiple OOM notification delivery and gets notification when OOM happens. -To register a notifier, application need: +To register a notifier, an application must: - create an eventfd using eventfd(2) - open memory.oom_control file - write string like " " to cgroup.event_control -Application will be notified through eventfd when OOM happens. -OOM notification doesn't work for root cgroup. +The application will be notified through eventfd when OOM happens. +OOM notification doesn't work for the root cgroup. -You can disable OOM-killer by writing "1" to memory.oom_control file, as: +You can disable the OOM-killer by writing "1" to memory.oom_control file, as: #echo 1 > memory.oom_control -This operation is only allowed to the top cgroup of sub-hierarchy. +This operation is only allowed to the top cgroup of a sub-hierarchy. If OOM-killer is disabled, tasks under cgroup will hang/sleep in memory cgroup's OOM-waitqueue when they request accountable memory. diff --git a/Documentation/cpu-freq/boost.txt b/Documentation/cpu-freq/boost.txt new file mode 100644 index 0000000000000000000000000000000000000000..9b4edfcf486f83c4f20b711104593865d1050449 --- /dev/null +++ b/Documentation/cpu-freq/boost.txt @@ -0,0 +1,93 @@ +Processor boosting control + + - information for users - + +Quick guide for the impatient: +-------------------- +/sys/devices/system/cpu/cpufreq/boost +controls the boost setting for the whole system. You can read and write +that file with either "0" (boosting disabled) or "1" (boosting allowed). +Reading or writing 1 does not mean that the system is boosting at this +very moment, but only that the CPU _may_ raise the frequency at it's +discretion. +-------------------- + +Introduction +------------- +Some CPUs support a functionality to raise the operating frequency of +some cores in a multi-core package if certain conditions apply, mostly +if the whole chip is not fully utilized and below it's intended thermal +budget. This is done without operating system control by a combination +of hardware and firmware. +On Intel CPUs this is called "Turbo Boost", AMD calls it "Turbo-Core", +in technical documentation "Core performance boost". In Linux we use +the term "boost" for convenience. + +Rationale for disable switch +---------------------------- + +Though the idea is to just give better performance without any user +intervention, sometimes the need arises to disable this functionality. +Most systems offer a switch in the (BIOS) firmware to disable the +functionality at all, but a more fine-grained and dynamic control would +be desirable: +1. While running benchmarks, reproducible results are important. Since + the boosting functionality depends on the load of the whole package, + single thread performance can vary. By explicitly disabling the boost + functionality at least for the benchmark's run-time the system will run + at a fixed frequency and results are reproducible again. +2. To examine the impact of the boosting functionality it is helpful + to do tests with and without boosting. +3. Boosting means overclocking the processor, though under controlled + conditions. By raising the frequency and the voltage the processor + will consume more power than without the boosting, which may be + undesirable for instance for mobile users. Disabling boosting may + save power here, though this depends on the workload. + + +User controlled switch +---------------------- + +To allow the user to toggle the boosting functionality, the acpi-cpufreq +driver exports a sysfs knob to disable it. There is a file: +/sys/devices/system/cpu/cpufreq/boost +which can either read "0" (boosting disabled) or "1" (boosting enabled). +Reading the file is always supported, even if the processor does not +support boosting. In this case the file will be read-only and always +reads as "0". Explicitly changing the permissions and writing to that +file anyway will return EINVAL. + +On supported CPUs one can write either a "0" or a "1" into this file. +This will either disable the boost functionality on all cores in the +whole system (0) or will allow the hardware to boost at will (1). + +Writing a "1" does not explicitly boost the system, but just allows the +CPU (and the firmware) to boost at their discretion. Some implementations +take external factors like the chip's temperature into account, so +boosting once does not necessarily mean that it will occur every time +even using the exact same software setup. + + +AMD legacy cpb switch +--------------------- +The AMD powernow-k8 driver used to support a very similar switch to +disable or enable the "Core Performance Boost" feature of some AMD CPUs. +This switch was instantiated in each CPU's cpufreq directory +(/sys/devices/system/cpu[0-9]*/cpufreq) and was called "cpb". +Though the per CPU existence hints at a more fine grained control, the +actual implementation only supported a system-global switch semantics, +which was simply reflected into each CPU's file. Writing a 0 or 1 into it +would pull the other CPUs to the same state. +For compatibility reasons this file and its behavior is still supported +on AMD CPUs, though it is now protected by a config switch +(X86_ACPI_CPUFREQ_CPB). On Intel CPUs this file will never be created, +even with the config option set. +This functionality is considered legacy and will be removed in some future +kernel version. + +More fine grained boosting control +---------------------------------- + +Technically it is possible to switch the boosting functionality at least +on a per package basis, for some CPUs even per core. Currently the driver +does not support it, but this may be implemented in the future. diff --git a/Documentation/cpuidle/sysfs.txt b/Documentation/cpuidle/sysfs.txt index 9d28a3406e745589383021732fe7941ed9aad1cb..b6f44f490ed7839f0963acfc0c53ed2537fa35e2 100644 --- a/Documentation/cpuidle/sysfs.txt +++ b/Documentation/cpuidle/sysfs.txt @@ -76,9 +76,17 @@ total 0 * desc : Small description about the idle state (string) -* disable : Option to disable this idle state (bool) +* disable : Option to disable this idle state (bool) -> see note below * latency : Latency to exit out of this idle state (in microseconds) * name : Name of the idle state (string) * power : Power consumed while in this idle state (in milliwatts) * time : Total time spent in this idle state (in microseconds) * usage : Number of times this state was entered (count) + +Note: +The behavior and the effect of the disable variable depends on the +implementation of a particular governor. In the ladder governor, for +example, it is not coherent, i.e. if one is disabling a light state, +then all deeper states are disabled as well, but the disable variable +does not reflect it. Likewise, if one enables a deep state but a lighter +state still is disabled, then this has no effect. diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 91f26148af79ef7949605d49d8ecf85de17888c5..fc81a7d6b0f1424169f8e710770ea685d2e3c0c6 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -1,3 +1,15 @@ +ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform) +----------------------------------------------------------------------------- +ARM's oldest Linux-supported platform with connectors for different core +tiles of ARMv4, ARMv5 and ARMv6 type. + +Required properties (in root node): + compatible = "arm,integrator-ap"; /* Application Platform */ + compatible = "arm,integrator-cp"; /* Compact Platform */ + +FPGA type interrupt controllers, see the versatile-fpga-irq binding doc. + + ARM Versatile Application and Platform Baseboards ------------------------------------------------- ARM's development hardware platform with connectors for customizable diff --git a/Documentation/devicetree/bindings/arm/bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm2835.txt new file mode 100644 index 0000000000000000000000000000000000000000..ac683480c48676153fd631d621a6527f649f652f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm2835.txt @@ -0,0 +1,8 @@ +Broadcom BCM2835 device tree bindings +------------------------------------------- + +Boards with the BCM2835 SoC shall have the following properties: + +Required root node property: + +compatible = "brcm,bcm2835"; diff --git a/Documentation/devicetree/bindings/arm/calxeda/combophy.txt b/Documentation/devicetree/bindings/arm/calxeda/combophy.txt new file mode 100644 index 0000000000000000000000000000000000000000..6622bdb2e8bcd2f78f3293bd6688d0ddc9f31d5f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/calxeda/combophy.txt @@ -0,0 +1,17 @@ +Calxeda Highbank Combination Phys for SATA + +Properties: +- compatible : Should be "calxeda,hb-combophy" +- #phy-cells: Should be 1. +- reg : Address and size for Combination Phy registers. +- phydev: device ID for programming the combophy. + +Example: + + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; + diff --git a/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt b/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt new file mode 100644 index 0000000000000000000000000000000000000000..31af1cbb60bde85fbff5d20f7e681009611fd08a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mrvl/tauros2.txt @@ -0,0 +1,17 @@ +* Marvell Tauros2 Cache + +Required properties: +- compatible : Should be "marvell,tauros2-cache". +- marvell,tauros2-cache-features : Specify the features supported for the + tauros2 cache. + The features including + CACHE_TAUROS2_PREFETCH_ON (1 << 0) + CACHE_TAUROS2_LINEFILL_BURST8 (1 << 1) + The definition can be found at + arch/arm/include/asm/hardware/cache-tauros2.h + +Example: + L2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0x3>; + }; diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt new file mode 100644 index 0000000000000000000000000000000000000000..8c5907b9cae84724ab30500cff9772838d8975d6 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/msm/timer.txt @@ -0,0 +1,38 @@ +* MSM Timer + +Properties: + +- compatible : Should at least contain "qcom,msm-timer". More specific + properties such as "qcom,msm-gpt" and "qcom,msm-dgt" specify a general + purpose timer and a debug timer respectively. + +- interrupts : Interrupt indicating a match event. + +- reg : Specifies the base address of the timer registers. The second region + specifies an optional register used to configure the clock divider. + +- clock-frequency : The frequency of the timer in Hz. + +Optional: + +- cpu-offset : per-cpu offset used when the timer is accessed without the + CPU remapping facilities. The offset is cpu-offset * cpu-nr. + +Example: + + timer@200a004 { + compatible = "qcom,msm-gpt", "qcom,msm-timer"; + interrupts = <1 2 0x301>; + reg = <0x0200a004 0x10>; + clock-frequency = <32768>; + cpu-offset = <0x40000>; + }; + + timer@200a024 { + compatible = "qcom,msm-dgt", "qcom,msm-timer"; + interrupts = <1 3 0x301>; + reg = <0x0200a024 0x10>, + <0x0200a034 0x4>; + clock-frequency = <6750000>; + cpu-offset = <0x40000>; + }; diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index ccdd0e53451fc916cd0bfe020fab31ccf52af84d..d0051a7505873e14d17c5a8718179f19475a78bc 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -36,6 +36,9 @@ Boards: - OMAP3 BeagleBoard : Low cost community board compatible = "ti,omap3-beagle", "ti,omap3" +- OMAP3 Tobi with Overo : Commercial expansion board with daughter board + compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3" + - OMAP4 SDP : Software Developement Board compatible = "ti,omap4-sdp", "ti,omap4430" diff --git a/Documentation/devicetree/bindings/arm/pmu.txt b/Documentation/devicetree/bindings/arm/pmu.txt index 1c044eb320cc4fb6ed4f269ebaaa763794c485e7..343781b9f246773ce880f9427623ebbd12202f32 100644 --- a/Documentation/devicetree/bindings/arm/pmu.txt +++ b/Documentation/devicetree/bindings/arm/pmu.txt @@ -7,8 +7,12 @@ representation in the device tree should be done as under:- Required properties: - compatible : should be one of + "arm,cortex-a15-pmu" "arm,cortex-a9-pmu" "arm,cortex-a8-pmu" + "arm,cortex-a7-pmu" + "arm,cortex-a5-pmu" + "arm,arm11mpcore-pmu" "arm,arm1176-pmu" "arm,arm1136-pmu" - interrupts : 1 combined interrupt or 1 per core. diff --git a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt new file mode 100644 index 0000000000000000000000000000000000000000..9989eda755d9bef56ac37048300fd2a879d66b60 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt @@ -0,0 +1,31 @@ +* ARM Versatile FPGA interrupt controller + +One or more FPGA IRQ controllers can be synthesized in an ARM reference board +such as the Integrator or Versatile family. The output of these different +controllers are OR:ed together and fed to the CPU tile's IRQ input. Each +instance can handle up to 32 interrupts. + +Required properties: +- compatible: "arm,versatile-fpga-irq" +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells: The number of cells to define the interrupts. Must be 1 + as the FPGA IRQ controller has no configuration options for interrupt + sources. The cell is a u32 and defines the interrupt number. +- reg: The register bank for the FPGA interrupt controller. +- clear-mask: a u32 number representing the mask written to clear all IRQs + on the controller at boot for example. +- valid-mask: a u32 number representing a bit mask determining which of + the interrupts are valid. Unconnected/unused lines are set to 0, and + the system till not make it possible for devices to request these + interrupts. + +Example: + +pic: pic@14000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x14000000 0x100>; + clear-mask = <0xffffffff>; + valid-mask = <0x003fffff>; +}; diff --git a/Documentation/devicetree/bindings/arm/vt8500.txt b/Documentation/devicetree/bindings/arm/vt8500.txt new file mode 100644 index 0000000000000000000000000000000000000000..d657832c6819e167e1b757ab43e12839b70aa569 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500.txt @@ -0,0 +1,14 @@ +VIA/Wondermedia VT8500 Platforms Device Tree Bindings +--------------------------------------- + +Boards with the VIA VT8500 SoC shall have the following properties: +Required root node property: +compatible = "via,vt8500"; + +Boards with the Wondermedia WM8505 SoC shall have the following properties: +Required root node property: +compatible = "wm,wm8505"; + +Boards with the Wondermedia WM8650 SoC shall have the following properties: +Required root node property: +compatible = "wm,wm8650"; diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt new file mode 100644 index 0000000000000000000000000000000000000000..0a4ce1051b0252bbbdeef3288b90e9913d3f16f0 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-intc.txt @@ -0,0 +1,16 @@ +VIA/Wondermedia VT8500 Interrupt Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-intc" +- reg : Should contain 1 register ranges(address and length) +- #interrupt-cells : should be <1> + +Example: + + intc: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt new file mode 100644 index 0000000000000000000000000000000000000000..521b9c7de933a15c165df3a70f2b0003b238b8a1 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-pmc.txt @@ -0,0 +1,13 @@ +VIA/Wondermedia VT8500 Power Management Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-pmc" +- reg : Should contain 1 register ranges(address and length) + +Example: + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt new file mode 100644 index 0000000000000000000000000000000000000000..901c73f0d8ef05fb54d517b807d04f80eef2e736 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/vt8500/via,vt8500-timer.txt @@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 Timer +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-timer" +- reg : Should contain 1 register ranges(address and length) +- interrupts : interrupt for the timer + +Example: + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt new file mode 100644 index 0000000000000000000000000000000000000000..0f7b9c2109f855d69b8d950675a1e8e17b836735 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/xen.txt @@ -0,0 +1,25 @@ +* Xen hypervisor device tree bindings + +Xen ARM virtual platforms shall have a top-level "hypervisor" node with +the following properties: + +- compatible: + compatible = "xen,xen-", "xen,xen"; + where is the version of the Xen ABI of the platform. + +- reg: specifies the base physical address and size of a region in + memory where the grant table should be mapped to, using an + HYPERVISOR_memory_op hypercall. The memory region is large enough to map + the whole grant table (it is larger or equal to gnttab_max_grant_frames()). + +- interrupts: the interrupt used by Xen to inject event notifications. + A GIC node is also required. + + +Example (assuming #address-cells = <2> and #size-cells = <2>): + +hypervisor { + compatible = "xen,xen-4.3", "xen,xen"; + reg = <0 0xb0000000 0 0x20000>; + interrupts = <1 15 0xf08>; +}; diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 8bb8a76d42e8c1b9cad1de552d8639045a204992..b519f9b699c30eec22d99b7398691b3b80c4c7a3 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -8,9 +8,18 @@ Required properties: - interrupts : - reg : +Optional properties: +- calxeda,port-phys: phandle-combophy and lane assignment, which maps each + SATA port to a combophy and a lane within that + combophy +- dma-coherent : Present if dma operations are coherent + Example: sata@ffe08000 { compatible = "calxeda,hb-ahci"; reg = <0xffe08000 0x1000>; interrupts = <115>; + calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1 + &combophy0 2 &combophy0 3>; + }; diff --git a/Documentation/devicetree/bindings/ata/pata-arasan.txt b/Documentation/devicetree/bindings/ata/pata-arasan.txt new file mode 100644 index 0000000000000000000000000000000000000000..95ec7f825ede7290d520e0ce4d4b06e462a5b208 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/pata-arasan.txt @@ -0,0 +1,17 @@ +* ARASAN PATA COMPACT FLASH CONTROLLER + +Required properties: +- compatible: "arasan,cf-spear1340" +- reg: Address range of the CF registers +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupt: Should contain the CF interrupt number + +Example: + + cf@fc000000 { + compatible = "arasan,cf-spear1340"; + reg = <0xfc000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + }; diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt new file mode 100644 index 0000000000000000000000000000000000000000..d2fe064a828b7d453d45876f66039e4a121f1a7c --- /dev/null +++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt @@ -0,0 +1,10 @@ +* OMAP OCP2SCP - ocp interface to scp interface + +properties: +- compatible : Should be "ti,omap-ocp2scp" +- #address-cells, #size-cells : Must be present if the device has sub-nodes +- ranges : the child address space are mapped 1:1 onto the parent address space +- ti,hwmods : must be "ocp2scp_usb_phy" + +Sub-nodes: +All the devices connected to ocp2scp are described using sub-node to ocp2scp diff --git a/Documentation/devicetree/bindings/clock/imx23-clock.txt b/Documentation/devicetree/bindings/clock/imx23-clock.txt new file mode 100644 index 0000000000000000000000000000000000000000..a0b867ef8d96f67b34df7ebdfb06e7da15e66492 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx23-clock.txt @@ -0,0 +1,76 @@ +* Clock bindings for Freescale i.MX23 + +Required properties: +- compatible: Should be "fsl,imx23-clkctrl" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX23 +clocks and IDs. + + Clock ID + ------------------ + ref_xtal 0 + pll 1 + ref_cpu 2 + ref_emi 3 + ref_pix 4 + ref_io 5 + saif_sel 6 + lcdif_sel 7 + gpmi_sel 8 + ssp_sel 9 + emi_sel 10 + cpu 11 + etm_sel 12 + cpu_pll 13 + cpu_xtal 14 + hbus 15 + xbus 16 + lcdif_div 17 + ssp_div 18 + gpmi_div 19 + emi_pll 20 + emi_xtal 21 + etm_div 22 + saif_div 23 + clk32k_div 24 + rtc 25 + adc 26 + spdif_div 27 + clk32k 28 + dri 29 + pwm 30 + filt 31 + uart 32 + ssp 33 + gpmi 34 + spdif 35 + emi 36 + saif 37 + lcdif 38 + etm 39 + usb 40 + usb_pwr 41 + +Examples: + +clks: clkctrl@80040000 { + compatible = "fsl,imx23-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + clock-output-names = + ... + "uart", /* 32 */ + ... + "end_of_list"; +}; + +auart0: serial@8006c000 { + compatible = "fsl,imx23-auart"; + reg = <0x8006c000 0x2000>; + interrupts = <24 25 23>; + clocks = <&clks 32>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/clock/imx28-clock.txt b/Documentation/devicetree/bindings/clock/imx28-clock.txt new file mode 100644 index 0000000000000000000000000000000000000000..aa2af2866fe820429d4a4faf0641b451f69106ff --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx28-clock.txt @@ -0,0 +1,99 @@ +* Clock bindings for Freescale i.MX28 + +Required properties: +- compatible: Should be "fsl,imx28-clkctrl" +- reg: Address and length of the register set +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX28 +clocks and IDs. + + Clock ID + ------------------ + ref_xtal 0 + pll0 1 + pll1 2 + pll2 3 + ref_cpu 4 + ref_emi 5 + ref_io0 6 + ref_io1 7 + ref_pix 8 + ref_hsadc 9 + ref_gpmi 10 + saif0_sel 11 + saif1_sel 12 + gpmi_sel 13 + ssp0_sel 14 + ssp1_sel 15 + ssp2_sel 16 + ssp3_sel 17 + emi_sel 18 + etm_sel 19 + lcdif_sel 20 + cpu 21 + ptp_sel 22 + cpu_pll 23 + cpu_xtal 24 + hbus 25 + xbus 26 + ssp0_div 27 + ssp1_div 28 + ssp2_div 29 + ssp3_div 30 + gpmi_div 31 + emi_pll 32 + emi_xtal 33 + lcdif_div 34 + etm_div 35 + ptp 36 + saif0_div 37 + saif1_div 38 + clk32k_div 39 + rtc 40 + lradc 41 + spdif_div 42 + clk32k 43 + pwm 44 + uart 45 + ssp0 46 + ssp1 47 + ssp2 48 + ssp3 49 + gpmi 50 + spdif 51 + emi 52 + saif0 53 + saif1 54 + lcdif 55 + etm 56 + fec 57 + can0 58 + can1 59 + usb0 60 + usb1 61 + usb0_pwr 62 + usb1_pwr 63 + enet_out 64 + +Examples: + +clks: clkctrl@80040000 { + compatible = "fsl,imx28-clkctrl"; + reg = <0x80040000 0x2000>; + #clock-cells = <1>; + clock-output-names = + ... + "uart", /* 45 */ + ... + "end_of_list"; +}; + +auart0: serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; + reg = <0x8006a000 0x2000>; + interrupts = <112 70 71>; + clocks = <&clks 45>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt new file mode 100644 index 0000000000000000000000000000000000000000..492bd991d52a45868436414318428af88457f02f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -0,0 +1,222 @@ +* Clock bindings for Freescale i.MX6 Quad + +Required properties: +- compatible: Should be "fsl,imx6q-ccm" +- reg: Address and length of the register set +- interrupts: Should contain CCM interrupt +- #clock-cells: Should be <1> + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. The following is a full list of i.MX6Q +clocks and IDs. + + Clock ID + --------------------------- + dummy 0 + ckil 1 + ckih 2 + osc 3 + pll2_pfd0_352m 4 + pll2_pfd1_594m 5 + pll2_pfd2_396m 6 + pll3_pfd0_720m 7 + pll3_pfd1_540m 8 + pll3_pfd2_508m 9 + pll3_pfd3_454m 10 + pll2_198m 11 + pll3_120m 12 + pll3_80m 13 + pll3_60m 14 + twd 15 + step 16 + pll1_sw 17 + periph_pre 18 + periph2_pre 19 + periph_clk2_sel 20 + periph2_clk2_sel 21 + axi_sel 22 + esai_sel 23 + asrc_sel 24 + spdif_sel 25 + gpu2d_axi 26 + gpu3d_axi 27 + gpu2d_core_sel 28 + gpu3d_core_sel 29 + gpu3d_shader_sel 30 + ipu1_sel 31 + ipu2_sel 32 + ldb_di0_sel 33 + ldb_di1_sel 34 + ipu1_di0_pre_sel 35 + ipu1_di1_pre_sel 36 + ipu2_di0_pre_sel 37 + ipu2_di1_pre_sel 38 + ipu1_di0_sel 39 + ipu1_di1_sel 40 + ipu2_di0_sel 41 + ipu2_di1_sel 42 + hsi_tx_sel 43 + pcie_axi_sel 44 + ssi1_sel 45 + ssi2_sel 46 + ssi3_sel 47 + usdhc1_sel 48 + usdhc2_sel 49 + usdhc3_sel 50 + usdhc4_sel 51 + enfc_sel 52 + emi_sel 53 + emi_slow_sel 54 + vdo_axi_sel 55 + vpu_axi_sel 56 + cko1_sel 57 + periph 58 + periph2 59 + periph_clk2 60 + periph2_clk2 61 + ipg 62 + ipg_per 63 + esai_pred 64 + esai_podf 65 + asrc_pred 66 + asrc_podf 67 + spdif_pred 68 + spdif_podf 69 + can_root 70 + ecspi_root 71 + gpu2d_core_podf 72 + gpu3d_core_podf 73 + gpu3d_shader 74 + ipu1_podf 75 + ipu2_podf 76 + ldb_di0_podf 77 + ldb_di1_podf 78 + ipu1_di0_pre 79 + ipu1_di1_pre 80 + ipu2_di0_pre 81 + ipu2_di1_pre 82 + hsi_tx_podf 83 + ssi1_pred 84 + ssi1_podf 85 + ssi2_pred 86 + ssi2_podf 87 + ssi3_pred 88 + ssi3_podf 89 + uart_serial_podf 90 + usdhc1_podf 91 + usdhc2_podf 92 + usdhc3_podf 93 + usdhc4_podf 94 + enfc_pred 95 + enfc_podf 96 + emi_podf 97 + emi_slow_podf 98 + vpu_axi_podf 99 + cko1_podf 100 + axi 101 + mmdc_ch0_axi_podf 102 + mmdc_ch1_axi_podf 103 + arm 104 + ahb 105 + apbh_dma 106 + asrc 107 + can1_ipg 108 + can1_serial 109 + can2_ipg 110 + can2_serial 111 + ecspi1 112 + ecspi2 113 + ecspi3 114 + ecspi4 115 + ecspi5 116 + enet 117 + esai 118 + gpt_ipg 119 + gpt_ipg_per 120 + gpu2d_core 121 + gpu3d_core 122 + hdmi_iahb 123 + hdmi_isfr 124 + i2c1 125 + i2c2 126 + i2c3 127 + iim 128 + enfc 129 + ipu1 130 + ipu1_di0 131 + ipu1_di1 132 + ipu2 133 + ipu2_di0 134 + ldb_di0 135 + ldb_di1 136 + ipu2_di1 137 + hsi_tx 138 + mlb 139 + mmdc_ch0_axi 140 + mmdc_ch1_axi 141 + ocram 142 + openvg_axi 143 + pcie_axi 144 + pwm1 145 + pwm2 146 + pwm3 147 + pwm4 148 + per1_bch 149 + gpmi_bch_apb 150 + gpmi_bch 151 + gpmi_io 152 + gpmi_apb 153 + sata 154 + sdma 155 + spba 156 + ssi1 157 + ssi2 158 + ssi3 159 + uart_ipg 160 + uart_serial 161 + usboh3 162 + usdhc1 163 + usdhc2 164 + usdhc3 165 + usdhc4 166 + vdo_axi 167 + vpu_axi 168 + cko1 169 + pll1_sys 170 + pll2_bus 171 + pll3_usb_otg 172 + pll4_audio 173 + pll5_video 174 + pll6_mlb 175 + pll7_usb_host 176 + pll8_enet 177 + ssi1_ipg 178 + ssi2_ipg 179 + ssi3_ipg 180 + rom 181 + usbphy1 182 + usbphy2 183 + ldb_di0_div_3_5 184 + ldb_di1_div_3_5 185 + +Examples: + +clks: ccm@020c4000 { + compatible = "fsl,imx6q-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = <0 87 0x04 0 88 0x04>; + #clock-cells = <1>; + clock-output-names = ... + "uart_ipg", + "uart_serial", + ...; +}; + +uart1: serial@02020000 { + compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = <0 26 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/clock/vt8500.txt b/Documentation/devicetree/bindings/clock/vt8500.txt new file mode 100644 index 0000000000000000000000000000000000000000..a880c70d0047091ab224c98422fb1a34b9f25cdb --- /dev/null +++ b/Documentation/devicetree/bindings/clock/vt8500.txt @@ -0,0 +1,72 @@ +Device Tree Clock bindings for arch-vt8500 + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of the following: + "via,vt8500-pll-clock" - for a VT8500/WM8505 PLL clock + "wm,wm8650-pll-clock" - for a WM8650 PLL clock + "via,vt8500-device-clock" - for a VT/WM device clock + +Required properties for PLL clocks: +- reg : shall be the control register offset from PMC base for the pll clock. +- clocks : shall be the input parent clock phandle for the clock. This should + be the reference clock. +- #clock-cells : from common clock binding; shall be set to 0. + +Required properties for device clocks: +- clocks : shall be the input parent clock phandle for the clock. This should + be a pll output. +- #clock-cells : from common clock binding; shall be set to 0. + + +Device Clocks + +Device clocks are required to have one or both of the following sets of +properties: + + +Gated device clocks: + +Required properties: +- enable-reg : shall be the register offset from PMC base for the enable + register. +- enable-bit : shall be the bit within enable-reg to enable/disable the clock. + + +Divisor device clocks: + +Required property: +- divisor-reg : shall be the register offset from PMC base for the divisor + register. +Optional property: +- divisor-mask : shall be the mask for the divisor register. Defaults to 0x1f + if not specified. + + +For example: + +ref25: ref25M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; +}; + +plla: plla { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x200>; +}; + +sdhc: sdhc { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x328>; + divisor-mask = <0x3f>; + enable-reg = <0x254>; + enable-bit = <18>; +}; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt new file mode 100644 index 0000000000000000000000000000000000000000..4416ccc33472c2cb270afe45ab201a5916e6a8cc --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt @@ -0,0 +1,55 @@ +Generic CPU0 cpufreq driver + +It is a generic cpufreq driver for CPU0 frequency management. It +supports both uniprocessor (UP) and symmetric multiprocessor (SMP) +systems which share clock and voltage across all CPUs. + +Both required and optional properties listed below must be defined +under node /cpus/cpu@0. + +Required properties: +- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt + for details + +Optional properties: +- clock-latency: Specify the possible maximum transition latency for clock, + in unit of nanoseconds. +- voltage-tolerance: Specify the CPU voltage tolerance in percentage. + +Examples: + +cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; + transition-latency = <61036>; /* two CLK32 periods */ + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + + cpu@2 { + compatible = "arm,cortex-a9"; + reg = <2>; + next-level-cache = <&L2>; + }; + + cpu@3 { + compatible = "arm,cortex-a9"; + reg = <3>; + next-level-cache = <&L2>; + }; +}; diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index bf57ecd5d73a6218d1310da2695f4bb977710e57..bd7ce120bc135e9eccb9f2cbdb3a38fdc15f9702 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -9,6 +9,7 @@ Copyright (C) 2008-2011 Freescale Semiconductor Inc. -Run Time Integrity Check (RTIC) Node -Run Time Integrity Check (RTIC) Memory Node -Secure Non-Volatile Storage (SNVS) Node + -Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node -Full Example NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator @@ -294,6 +295,27 @@ Secure Non-Volatile Storage (SNVS) Node address and length of the SEC4 configuration registers. + - #address-cells + Usage: required + Value type: + Definition: A standard property. Defines the number of cells + for representing physical addresses in child nodes. Must + have a value of 1. + + - #size-cells + Usage: required + Value type: + Definition: A standard property. Defines the number of cells + for representing the size of physical addresses in + child nodes. Must have a value of 1. + + - ranges + Usage: required + Value type: + Definition: A standard property. Specifies the physical address + range of the SNVS register space. A triplet that includes + the child address, parent address, & length. + - interrupts Usage: required Value type: @@ -314,10 +336,33 @@ EXAMPLE sec_mon@314000 { compatible = "fsl,sec-v4.0-mon"; reg = <0x314000 0x1000>; + ranges = <0 0x314000 0x1000>; interrupt-parent = <&mpic>; interrupts = <93 2>; }; +===================================================================== +Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node + + A SNVS child node that defines SNVS LP RTC. + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,sec-v4.0-mon-rtc-lp". + + - reg + Usage: required + Value type: + Definition: A standard property. Specifies the physical + address and length of the SNVS LP configuration registers. + +EXAMPLE + sec_mon_rtc_lp@314000 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + }; + ===================================================================== FULL EXAMPLE @@ -390,8 +435,14 @@ FULL EXAMPLE sec_mon: sec_mon@314000 { compatible = "fsl,sec-v4.0-mon"; reg = <0x314000 0x1000>; + ranges = <0 0x314000 0x1000>; interrupt-parent = <&mpic>; interrupts = <93 2>; + + sec_mon_rtc_lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + }; }; ===================================================================== diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt new file mode 100644 index 0000000000000000000000000000000000000000..47229b1a594b2479e62bf073128ee0b43476159b --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt @@ -0,0 +1,20 @@ +Marvell Cryptographic Engines And Security Accelerator + +Required properties: +- compatible : should be "marvell,orion-crypto" +- reg : base physical address of the engine and length of memory mapped + region, followed by base physical address of sram and its memory + length +- reg-names : "regs" , "sram"; +- interrupts : interrupt number + +Examples: + + crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0x4000000 0x800>; + reg-names = "regs" , "sram"; + interrupts = <22>; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt index a4cd273b2a679d0d5c4952d6a576149658570cdd..36e27d54260b37ddde16669c0294474026084b7b 100644 --- a/Documentation/devicetree/bindings/dma/arm-pl330.txt +++ b/Documentation/devicetree/bindings/dma/arm-pl330.txt @@ -9,6 +9,9 @@ Required properties: region. - interrupts: interrupt number to the cpu. +Optional properties: +- dma-coherent : Present if dma operations are coherent + Example: pdma0: pdma@12680000 { diff --git a/Documentation/devicetree/bindings/dma/mmp-dma.txt b/Documentation/devicetree/bindings/dma/mmp-dma.txt new file mode 100644 index 0000000000000000000000000000000000000000..a4fa4efa1d83a3aa7fa3a4c0e9ca99d914e7f463 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/mmp-dma.txt @@ -0,0 +1,74 @@ +* MARVELL MMP DMA controller + +Marvell Peripheral DMA Controller +Used platfroms: pxa688, pxa910, pxa3xx, etc + +Required properties: +- compatible: Should be "marvell,pdma-1.0" +- reg: Should contain DMA registers location and length. +- interrupts: Either contain all of the per-channel DMA interrupts + or one irq for pdma device +- #dma-channels: Number of DMA channels supported by the controller. + +"marvell,pdma-1.0" +Used platfroms: pxa25x, pxa27x, pxa3xx, pxa93x, pxa168, pxa910, pxa688. + +Examples: + +/* + * Each channel has specific irq + * ICU parse out irq channel from ICU register, + * while DMA controller may not able to distinguish the irq channel + * Using this method, interrupt-parent is required as demuxer + * For example, pxa688 icu register 0x128, bit 0~15 is PDMA channel irq, + * 18~21 is ADMA irq + */ +pdma: dma-controller@d4000000 { + compatible = "marvell,pdma-1.0"; + reg = <0xd4000000 0x10000>; + interrupts = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; + interrupt-parent = <&intcmux32>; + #dma-channels = <16>; + }; + +/* + * One irq for all channels + * Dmaengine driver (DMA controller) distinguish irq channel via + * parsing internal register + */ +pdma: dma-controller@d4000000 { + compatible = "marvell,pdma-1.0"; + reg = <0xd4000000 0x10000>; + interrupts = <47>; + #dma-channels = <16>; + }; + + +Marvell Two Channel DMA Controller used specifically for audio +Used platfroms: pxa688, pxa910 + +Required properties: +- compatible: Should be "marvell,adma-1.0" or "marvell,pxa910-squ" +- reg: Should contain DMA registers location and length. +- interrupts: Either contain all of the per-channel DMA interrupts + or one irq for dma device + +"marvell,adma-1.0" used on pxa688 +"marvell,pxa910-squ" used on pxa910 + +Examples: + +/* each channel has specific irq */ +adma0: dma-controller@d42a0800 { + compatible = "marvell,adma-1.0"; + reg = <0xd42a0800 0x100>; + interrupts = <18 19>; + interrupt-parent = <&intcmux32>; + }; + +/* One irq for all channels */ +squ: dma-controller@d42a0800 { + compatible = "marvell,pxa910-squ"; + reg = <0xd42a0800 0x100>; + interrupts = <46>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-74x164.txt b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt new file mode 100644 index 0000000000000000000000000000000000000000..cc2608021f2629a93eef7b92ea8aed797e5772be --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-74x164.txt @@ -0,0 +1,22 @@ +* Generic 8-bits shift register GPIO driver + +Required properties: +- compatible : Should be "fairchild,74hc595" +- reg : chip select number +- gpio-controller : Marks the device node as a gpio controller. +- #gpio-cells : Should be two. The first cell is the pin number and + the second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low +- registers-number: Number of daisy-chained shift registers + +Example: + +gpio5: gpio5@0 { + compatible = "fairchild,74hc595"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + registers-number = <4>; + spi-max-frequency = <100000>; +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio-adnp.txt b/Documentation/devicetree/bindings/gpio/gpio-adnp.txt new file mode 100644 index 0000000000000000000000000000000000000000..af66b27248375b9ed692efe831eb27c95443a2ab --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-adnp.txt @@ -0,0 +1,34 @@ +Avionic Design N-bit GPIO expander bindings + +Required properties: +- compatible: should be "ad,gpio-adnp" +- reg: The I2C slave address for this device. +- interrupt-parent: phandle of the parent interrupt controller. +- interrupts: Interrupt specifier for the controllers interrupt. +- #gpio-cells: Should be 2. The first cell is the GPIO number and the + second cell is used to specify optional parameters: + - bit 0: polarity (0: normal, 1: inverted) +- gpio-controller: Marks the device as a GPIO controller +- nr-gpios: The number of pins supported by the controller. + +The GPIO expander can optionally be used as an interrupt controller, in +which case it uses the default two cell specifier as described in +Documentation/devicetree/bindings/interrupt-controller/interrupts.txt. + +Example: + + gpioext: gpio-controller@41 { + compatible = "ad,gpio-adnp"; + reg = <0x41>; + + interrupt-parent = <&gpio>; + interrupts = <160 1>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + + nr-gpios = <64>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-fan.txt b/Documentation/devicetree/bindings/gpio/gpio-fan.txt new file mode 100644 index 0000000000000000000000000000000000000000..2dd457a3469af94baa89534c79aaacdf56e2d75e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-fan.txt @@ -0,0 +1,25 @@ +Bindings for fan connected to GPIO lines + +Required properties: +- compatible : "gpio-fan" +- gpios: Specifies the pins that map to bits in the control value, + ordered MSB-->LSB. +- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the + control value that should be set to achieve them. This array + must have the RPM values in ascending order. + +Optional properties: +- alarm-gpios: This pin going active indicates something is wrong with + the fan, and a udev event will be fired. + +Examples: + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio1 14 1 + &gpio1 13 1>; + gpio-fan,speed-map = <0 0 + 3000 1 + 6000 2>; + alarm-gpios = <&gpio1 15 1>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt new file mode 100644 index 0000000000000000000000000000000000000000..a6f3bec1da7d0f46d6f0ecf22fcec20232b354dc --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt @@ -0,0 +1,53 @@ +* Marvell EBU GPIO controller + +Required properties: + +- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio" + or "marvell,armadaxp-gpio". "marvell,orion-gpio" should be used for + Orion, Kirkwood, Dove, Discovery (except MV78200) and Armada + 370. "marvell,mv78200-gpio" should be used for the Discovery + MV78200. "marvel,armadaxp-gpio" should be used for all Armada XP + SoCs (MV78230, MV78260, MV78460). + +- reg: Address and length of the register set for the device. Only one + entry is expected, except for the "marvell,armadaxp-gpio" variant + for which two entries are expected: one for the general registers, + one for the per-cpu registers. + +- interrupts: The list of interrupts that are used for all the pins + managed by this GPIO bank. There can be more than one interrupt + (example: 1 interrupt per 8 pins on Armada XP, which means 4 + interrupts per bank of 32 GPIOs). + +- interrupt-controller: identifies the node as an interrupt controller + +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. Should be two. + The first cell is the GPIO number. + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + +- gpio-controller: marks the device node as a gpio controller + +- ngpios: number of GPIOs this controller has + +- #gpio-cells: Should be two. The first cell is the pin number. The + second cell is reserved for flags, unused at the moment. + +Example: + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt index 5375625e8cd2bdfb07e7a935286bd1d50eb873b4..f1e5dfecf55def351aa4d63fe9a241ac6d495441 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-samsung.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-samsung.txt @@ -39,3 +39,46 @@ Example: #gpio-cells = <4>; gpio-controller; }; + + +Samsung S3C24XX GPIO Controller + +Required properties: +- compatible: Compatible property value should be "samsung,s3c24xx-gpio". + +- reg: Physical base address of the controller and length of memory mapped + region. + +- #gpio-cells: Should be 3. The syntax of the gpio specifier used by client nodes + should be the following with values derived from the SoC user manual. + <[phandle of the gpio controller node] + [pin number within the gpio controller] + [mux function] + [flags and pull up/down] + + Values for gpio specifier: + - Pin number: depending on the controller a number from 0 up to 15. + - Mux function: Depending on the SoC and the gpio bank the gpio can be set + as input, output or a special function + - Flags and Pull Up/Down: the values to use differ for the individual SoCs + example S3C2416/S3C2450: + 0 - Pull Up/Down Disabled. + 1 - Pull Down Enabled. + 2 - Pull Up Enabled. + Bit 16 (0x00010000) - Input is active low. + Consult the user manual for the correct values of Mux and Pull Up/Down. + +- gpio-controller: Specifies that the node is a gpio controller. +- #address-cells: should be 1. +- #size-cells: should be 1. + +Example: + + gpa: gpio-controller@56000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "samsung,s3c24xx-gpio"; + reg = <0x56000000 0x10>; + #gpio-cells = <3>; + gpio-controller; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt index 16695d9cf1e8acd2ef460558aeaf9a52e010fb08..66788fda1db383491411364f197a39f7233f4e13 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-twl4030.txt @@ -11,6 +11,11 @@ Required properties: - interrupt-controller: Mark the device node as an interrupt controller The first cell is the GPIO number. The second cell is not used. +- ti,use-leds : Enables LEDA and LEDB outputs if set +- ti,debounce : if n-th bit is set, debounces GPIO-n +- ti,mmc-cd : if n-th bit is set, GPIO-n controls VMMC(n+1) +- ti,pullups : if n-th bit is set, set a pullup on GPIO-n +- ti,pulldowns : if n-th bit is set, set a pulldown on GPIO-n Example: @@ -20,4 +25,5 @@ twl_gpio: gpio { gpio-controller; #interrupt-cells = <2>; interrupt-controller; + ti,use-leds; }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt new file mode 100644 index 0000000000000000000000000000000000000000..f4dc5233167e8c27ff6ff32ea16c13720ea996f9 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-vt8500.txt @@ -0,0 +1,24 @@ +VIA/Wondermedia VT8500 GPIO Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-gpio", "wm,wm8505-gpio" + or "wm,wm8650-gpio" depending on your SoC +- reg : Should contain 1 register range (address and length) +- #gpio-cells : should be <3>. + 1) bank + 2) pin number + 3) flags - should be 0 + +Example: + + gpio: gpio-controller@d8110000 { + compatible = "via,vt8500-gpio"; + gpio-controller; + reg = <0xd8110000 0x10000>; + #gpio-cells = <3>; + }; + + vibrate { + gpios = <&gpio 0 1 0>; /* Bank 0, Pin 1, No flags */ + }; diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt index 9bb308abd2213c3ee061ebbf45389f4643f583ba..edc83c1c0d54bb5f7f3297593eba77f1931e3d12 100644 --- a/Documentation/devicetree/bindings/gpio/led.txt +++ b/Documentation/devicetree/bindings/gpio/led.txt @@ -8,7 +8,7 @@ node's name represents the name of the corresponding LED. LED sub-node properties: - gpios : Should specify the LED's GPIO, see "gpios property" in - Documentation/devicetree/gpio.txt. Active low LEDs should be + Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs should be indicated using flags in the GPIO specifier. - label : (optional) The label for this LED. If omitted, the label is taken from the node name (excluding the unit address). diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index 1a85f986961bf8f8d68909210d0fc8a1138d5d09..2f5322b119ebdb6116ff4c5c9b20e50a1b5fae88 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -56,3 +56,4 @@ stm,m41t00 Serial Access TIMEKEEPER stm,m41t62 Serial real-time clock (RTC) with alarm stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS ti,tsc2003 I2C Touch-Screen Controller +ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface diff --git a/Documentation/devicetree/bindings/input/gpio-keys-polled.txt b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt new file mode 100644 index 0000000000000000000000000000000000000000..313abefa37ccd7dd74cc650d38cfc0babfe5f31b --- /dev/null +++ b/Documentation/devicetree/bindings/input/gpio-keys-polled.txt @@ -0,0 +1,38 @@ +Device-Tree bindings for input/gpio_keys_polled.c keyboard driver + +Required properties: + - compatible = "gpio-keys-polled"; + - poll-interval: Poll interval time in milliseconds + +Optional properties: + - autorepeat: Boolean, Enable auto repeat feature of Linux input + subsystem. + +Each button (key) is represented as a sub-node of "gpio-keys-polled": +Subnode properties: + + - gpios: OF device-tree gpio specification. + - label: Descriptive name of the key. + - linux,code: Keycode to emit. + +Optional subnode-properties: + - linux,input-type: Specify event type this button/key generates. + If not specified defaults to <1> == EV_KEY. + - debounce-interval: Debouncing interval time in milliseconds. + If not specified defaults to 5. + - gpio-key,wakeup: Boolean, button can wake-up the system. + +Example nodes: + + gpio_keys_polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + autorepeat; + button@21 { + label = "GPIO Key UP"; + linux,code = <103>; + gpios = <&gpio1 0 1>; + }; + ... diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt b/Documentation/devicetree/bindings/input/rotary-encoder.txt new file mode 100644 index 0000000000000000000000000000000000000000..331549593ed5e031ec696cad610f3347763574b7 --- /dev/null +++ b/Documentation/devicetree/bindings/input/rotary-encoder.txt @@ -0,0 +1,36 @@ +Rotary encoder DT bindings + +Required properties: +- gpios: a spec for two GPIOs to be used + +Optional properties: +- linux,axis: the input subsystem axis to map to this rotary encoder. + Defaults to 0 (ABS_X / REL_X) +- rotary-encoder,steps: Number of steps in a full turnaround of the + encoder. Only relevant for absolute axis. Defaults to 24 which is a + typical value for such devices. +- rotary-encoder,relative-axis: register a relative axis rather than an + absolute one. Relative axis will only generate +1/-1 events on the input + device, hence no steps need to be passed. +- rotary-encoder,rollover: Automatic rollove when the rotary value becomes + greater than the specified steps or smaller than 0. For absolute axis only. +- rotary-encoder,half-period: Makes the driver work on half-period mode. + +See Documentation/input/rotary-encoder.txt for more information. + +Example: + + rotary@0 { + compatible = "rotary-encoder"; + gpios = <&gpio 19 1>, <&gpio 20 0>; /* GPIO19 is inverted */ + linux,axis = <0>; /* REL_X */ + rotary-encoder,relative-axis; + }; + + rotary@1 { + compatible = "rotary-encoder"; + gpios = <&gpio 21 0>, <&gpio 22 0>; + linux,axis = <1>; /* ABS_Y */ + rotary-encoder,steps = <24>; + rotary-encoder,rollover; + }; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt new file mode 100644 index 0000000000000000000000000000000000000000..548892c08c598990c01964a86728420a7ad0967b --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt @@ -0,0 +1,110 @@ +BCM2835 Top-Level ("ARMCTRL") Interrupt Controller + +The BCM2835 contains a custom top-level interrupt controller, which supports +72 interrupt sources using a 2-level register scheme. The interrupt +controller, or the HW block containing it, is referred to occasionally +as "armctrl" in the SoC documentation, hence naming of this binding. + +Required properties: + +- compatible : should be "brcm,bcm2835-armctrl-ic.txt" +- reg : Specifies base physical address and size of the registers. +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 2. + + The 1st cell is the interrupt bank; 0 for interrupts in the "IRQ basic + pending" register, or 1/2 respectively for interrupts in the "IRQ pending + 1/2" register. + + The 2nd cell contains the interrupt number within the bank. Valid values + are 0..7 for bank 0, and 0..31 for bank 1. + +The interrupt sources are as follows: + +Bank 0: +0: ARM_TIMER +1: ARM_MAILBOX +2: ARM_DOORBELL_0 +3: ARM_DOORBELL_1 +4: VPU0_HALTED +5: VPU1_HALTED +6: ILLEGAL_TYPE0 +7: ILLEGAL_TYPE1 + +Bank 1: +0: TIMER0 +1: TIMER1 +2: TIMER2 +3: TIMER3 +4: CODEC0 +5: CODEC1 +6: CODEC2 +7: VC_JPEG +8: ISP +9: VC_USB +10: VC_3D +11: TRANSPOSER +12: MULTICORESYNC0 +13: MULTICORESYNC1 +14: MULTICORESYNC2 +15: MULTICORESYNC3 +16: DMA0 +17: DMA1 +18: VC_DMA2 +19: VC_DMA3 +20: DMA4 +21: DMA5 +22: DMA6 +23: DMA7 +24: DMA8 +25: DMA9 +26: DMA10 +27: DMA11 +28: DMA12 +29: AUX +30: ARM +31: VPUDMA + +Bank 2: +0: HOSTPORT +1: VIDEOSCALER +2: CCP2TX +3: SDC +4: DSI0 +5: AVE +6: CAM0 +7: CAM1 +8: HDMI0 +9: HDMI1 +10: PIXELVALVE1 +11: I2CSPISLV +12: DSI1 +13: PWA0 +14: PWA1 +15: CPR +16: SMI +17: GPIO0 +18: GPIO1 +19: GPIO2 +20: GPIO3 +21: VC_I2C +22: VC_SPI +23: VC_I2SPCM +24: VC_SDIO +25: VC_UART +26: SLIMBUS +27: VEC +28: CPG +29: RNG +30: VC_ARASANSDIO +31: AVSPMON + +Example: + +intc: interrupt-controller { + compatible = "brcm,bcm2835-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-controller; + #interrupt-cells = <2>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt new file mode 100644 index 0000000000000000000000000000000000000000..72a06c0ab1db65a9e3ac0e00fc161d070130fd3d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt @@ -0,0 +1,95 @@ +Specifying interrupt information for devices +============================================ + +1) Interrupt client nodes +------------------------- + +Nodes that describe devices which generate interrupts must contain an +"interrupts" property. This property must contain a list of interrupt +specifiers, one per output interrupt. The format of the interrupt specifier is +determined by the interrupt controller to which the interrupts are routed; see +section 2 below for details. + +The "interrupt-parent" property is used to specify the controller to which +interrupts are routed and contains a single phandle referring to the interrupt +controller node. This property is inherited, so it may be specified in an +interrupt client node or in any of its parent nodes. + +2) Interrupt controller nodes +----------------------------- + +A device is marked as an interrupt controller with the "interrupt-controller" +property. This is a empty, boolean property. An additional "#interrupt-cells" +property defines the number of cells needed to specify a single interrupt. + +It is the responsibility of the interrupt controller's binding to define the +length and format of the interrupt specifier. The following two variants are +commonly used: + + a) one cell + ----------- + The #interrupt-cells property is set to 1 and the single cell defines the + index of the interrupt within the controller. + + Example: + + vic: intc@10140000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10140000 0x1000>; + }; + + sic: intc@10003000 { + compatible = "arm,versatile-sic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10003000 0x1000>; + interrupt-parent = <&vic>; + interrupts = <31>; /* Cascaded to vic */ + }; + + b) two cells + ------------ + The #interrupt-cells property is set to 2 and the first cell defines the + index of the interrupt within the controller, while the second cell is used + to specify any of the following flags: + - bits[3:0] trigger type and level flags + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + + Example: + + i2c@7000c000 { + gpioext: gpio-adnp@41 { + compatible = "ad,gpio-adnp"; + reg = <0x41>; + + interrupt-parent = <&gpio>; + interrupts = <160 1>; + + gpio-controller; + #gpio-cells = <1>; + + interrupt-controller; + #interrupt-cells = <2>; + + nr-gpios = <64>; + }; + + sx8634@2b { + compatible = "smtc,sx8634"; + reg = <0x2b>; + + interrupt-parent = <&gpioext>; + interrupts = <3 0x8>; + + #address-cells = <1>; + #size-cells = <0>; + + threshold = <0x40>; + sensitivity = <7>; + }; + }; diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt new file mode 100644 index 0000000000000000000000000000000000000000..9ceb19e0c7fde6be95d3470ce7a525ba289952ea --- /dev/null +++ b/Documentation/devicetree/bindings/lpddr2/lpddr2-timings.txt @@ -0,0 +1,52 @@ +* AC timing parameters of LPDDR2(JESD209-2) memories for a given speed-bin + +Required properties: +- compatible : Should be "jedec,lpddr2-timings" +- min-freq : minimum DDR clock frequency for the speed-bin. Type is +- max-freq : maximum DDR clock frequency for the speed-bin. Type is + +Optional properties: + +The following properties represent AC timing parameters from the memory +data-sheet of the device for a given speed-bin. All these properties are +of type and the default unit is ps (pico seconds). Parameters with +a different unit have a suffix indicating the unit such as 'tRAS-max-ns' +- tRCD +- tWR +- tRAS-min +- tRRD +- tWTR +- tXP +- tRTP +- tDQSCK-max +- tFAW +- tZQCS +- tZQinit +- tRPab +- tZQCL +- tCKESR +- tRAS-max-ns +- tDQSCK-max-derated + +Example: + +timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; +}; diff --git a/Documentation/devicetree/bindings/lpddr2/lpddr2.txt b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt new file mode 100644 index 0000000000000000000000000000000000000000..58354a075e13928f54ded8cdd80323c44c23bbbc --- /dev/null +++ b/Documentation/devicetree/bindings/lpddr2/lpddr2.txt @@ -0,0 +1,102 @@ +* LPDDR2 SDRAM memories compliant to JEDEC JESD209-2 + +Required properties: +- compatible : Should be one of - "jedec,lpddr2-nvm", "jedec,lpddr2-s2", + "jedec,lpddr2-s4" + + "ti,jedec-lpddr2-s2" should be listed if the memory part is LPDDR2-S2 type + + "ti,jedec-lpddr2-s4" should be listed if the memory part is LPDDR2-S4 type + + "ti,jedec-lpddr2-nvm" should be listed if the memory part is LPDDR2-NVM type + +- density : representing density in Mb (Mega bits) + +- io-width : representing bus width. Possible values are 8, 16, and 32 + +Optional properties: + +The following optional properties represent the minimum value of some AC +timing parameters of the DDR device in terms of number of clock cycles. +These values shall be obtained from the device data-sheet. +- tRRD-min-tck +- tWTR-min-tck +- tXP-min-tck +- tRTP-min-tck +- tCKE-min-tck +- tRPab-min-tck +- tRCD-min-tck +- tWR-min-tck +- tRASmin-min-tck +- tCKESR-min-tck +- tFAW-min-tck + +Child nodes: +- The lpddr2 node may have one or more child nodes of type "lpddr2-timings". + "lpddr2-timings" provides AC timing parameters of the device for + a given speed-bin. The user may provide the timings for as many + speed-bins as is required. Please see Documentation/devicetree/ + bindings/lpddr2/lpddr2-timings.txt for more information on "lpddr2-timings" + +Example: + +elpida_ECB240ABACN : lpddr2 { + compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4"; + density = <2048>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + }; + + timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <200000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <10000>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + }; + +} diff --git a/Documentation/devicetree/bindings/media/exynos5-gsc.txt b/Documentation/devicetree/bindings/media/exynos5-gsc.txt new file mode 100644 index 0000000000000000000000000000000000000000..0604d42f38d1941526d47ad11a958a2a83797f97 --- /dev/null +++ b/Documentation/devicetree/bindings/media/exynos5-gsc.txt @@ -0,0 +1,30 @@ +* Samsung Exynos5 G-Scaler device + +G-Scaler is used for scaling and color space conversion on EXYNOS5 SoCs. + +Required properties: +- compatible: should be "samsung,exynos5-gsc" +- reg: should contain G-Scaler physical address location and length. +- interrupts: should contain G-Scaler interrupt number + +Example: + +gsc_0: gsc@0x13e00000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e00000 0x1000>; + interrupts = <0 85 0>; +}; + +Aliases: +Each G-Scaler node should have a numbered alias in the aliases node, +in the form of gscN, N = 0...3. G-Scaler driver uses these aliases +to retrieve the device IDs using "of_alias_get_id()" call. + +Example: + +aliases { + gsc0 =&gsc_0; + gsc1 =&gsc_1; + gsc2 =&gsc_2; + gsc3 =&gsc_3; +}; diff --git a/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt new file mode 100644 index 0000000000000000000000000000000000000000..938f8e1ba2051c98302705df219da917b7e5952f --- /dev/null +++ b/Documentation/devicetree/bindings/memory-controllers/ti/emif.txt @@ -0,0 +1,55 @@ +* EMIF family of TI SDRAM controllers + +EMIF - External Memory Interface - is an SDRAM controller used in +TI SoCs. EMIF supports, based on the IP revision, one or more of +DDR2/DDR3/LPDDR2 protocols. This binding describes a given instance +of the EMIF IP and memory parts attached to it. + +Required properties: +- compatible : Should be of the form "ti,emif-" where + is the IP revision of the specific EMIF instance. + +- phy-type : indicating the DDR phy type. Following are the + allowed values + <1> : Attila PHY + <2> : Intelli PHY + +- device-handle : phandle to a "lpddr2" node representing the memory part + +- ti,hwmods : For TI hwmods processing and omap device creation + the value shall be "emif" where is the number of the EMIF + instance with base 1. + +Optional properties: +- cs1-used : Have this property if CS1 of this EMIF + instance has a memory part attached to it. If there is a memory + part attached to CS1, it should be the same type as the one on CS0, + so there is no need to give the details of this memory part. + +- cal-resistor-per-cs : Have this property if the board has one + calibration resistor per chip-select. + +- hw-caps-read-idle-ctrl: Have this property if the controller + supports read idle window programming + +- hw-caps-dll-calib-ctrl: Have this property if the controller + supports dll calibration control + +- hw-caps-ll-interface : Have this property if the controller + has a low latency interface and corresponding interrupt events + +- hw-caps-temp-alert : Have this property if the controller + has capability for generating SDRAM temperature alerts + +Example: + +emif1: emif@0x4c000000 { + compatible = "ti,emif-4d"; + ti,hwmods = "emif2"; + phy-type = <1>; + device-handle = <&elpida_ECB240ABACN>; + cs1-used; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; +}; diff --git a/Documentation/devicetree/bindings/mfd/88pm860x.txt b/Documentation/devicetree/bindings/mfd/88pm860x.txt new file mode 100644 index 0000000000000000000000000000000000000000..63f3ee33759cf0ed57e2ff1622966b0a5a847583 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/88pm860x.txt @@ -0,0 +1,85 @@ +* Marvell 88PM860x Power Management IC + +Required parent device properties: +- compatible : "marvell,88pm860x" +- reg : the I2C slave address for the 88pm860x chip +- interrupts : IRQ line for the 88pm860x chip +- interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain) +- #interrupt-cells : should be 1. + - The cell is the 88pm860x local IRQ number + +Optional parent device properties: +- marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read +- marvell,88pm860x-slave-addr: 88pm860x are two chips solution. stores the I2C address + of one chip, and this property stores the I2C address of + another chip. + +88pm860x consists of a large and varied group of sub-devices: + +Device Supply Names Description +------ ------------ ----------- +88pm860x-onkey : : On key +88pm860x-rtc : : RTC +88pm8607 : : Regulators +88pm860x-backlight : : Backlight +88pm860x-led : : Led +88pm860x-touch : : Touchscreen + +Example: + + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + interrupts = <4>; + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <1>; + + marvell,88pm860x-irq-read-clr; + marvell,88pm860x-slave-addr = <0x11>; + + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + rtc { + marvell,88pm860x-vrtc = <1>; + }; + touch { + marvell,88pm860x-gpadc-prebias = <1>; + marvell,88pm860x-gpadc-slot-cycle = <1>; + marvell,88pm860x-tsi-prebias = <6>; + marvell,88pm860x-pen-prebias = <16>; + marvell,88pm860x-pen-prechg = <2>; + marvell,88pm860x-resistor-X = <300>; + }; + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; + }; + leds { + led0-red { + marvell,88pm860x-iset = <12>; + }; + led0-green { + marvell,88pm860x-iset = <12>; + }; + led0-blue { + marvell,88pm860x-iset = <12>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/ab8500.txt b/Documentation/devicetree/bindings/mfd/ab8500.txt index 69e757a657a0e293d6d435f65c59c7ba6343e52a..ce83c8d3c00e262953b543717c00105ac92edf64 100644 --- a/Documentation/devicetree/bindings/mfd/ab8500.txt +++ b/Documentation/devicetree/bindings/mfd/ab8500.txt @@ -23,6 +23,7 @@ Device IRQ Names Supply Names Description ab8500-bm : : : Battery Manager ab8500-btemp : : : Battery Temperature ab8500-charger : : : Battery Charger +ab8500-codec : : : Audio Codec ab8500-fg : : : Fuel Gauge ab8500-gpadc : HW_CONV_END : vddadc : Analogue to Digital Converter SW_CONV_END : : @@ -52,6 +53,14 @@ Optional child device properties: supplied in the interrupts property - -supply : contains a phandle to the regulator supply node in Device Tree +Non-standard child device properties: + - Audio CODEC: + - stericsson,amic[1|2]-type-single-ended : Single-ended Analoge Mic (default: differential) + - stericsson,amic1a-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic + - stericsson,amic1b-bias-vamic2 : Analoge Mic wishes to use a non-standard Vamic + - stericsson,amic2-bias-vamic1 : Analoge Mic wishes to use a non-standard Vamic + - stericsson,earpeice-cmv : Earpeice voltage (only: 950 | 1100 | 1270 | 1580) + ab8500@5 { compatible = "stericsson,ab8500"; reg = <5>; /* mailbox 5 is i2c */ @@ -110,6 +119,12 @@ ab8500@5 { compatible = "stericsson,ab8500-pwm"; }; + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; + ab8500-regulators { compatible = "stericsson,ab8500-regulator"; diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt new file mode 100644 index 0000000000000000000000000000000000000000..fe8150bb3248e9920f8a24f4b91efe39440b38d6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/syscon.txt @@ -0,0 +1,20 @@ +* System Controller Registers R/W driver + +System controller node represents a register region containing a set +of miscellaneous registers. The registers are not cohesive enough to +represent as any specific type of device. The typical use-case is for +some other node's driver, or platform-specific code, to acquire a +reference to the syscon node (e.g. by phandle, node path, or search +using a specific compatible value), interrogate the node (or associated +OS driver) to determine the location of the registers, and access the +registers directly. + +Required properties: +- compatible: Should contain "syscon". +- reg: the register region can be accessed from syscon + +Examples: +gpr: iomuxc-gpr@020e0000 { + compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e0000 0x38>; +}; diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt index db03599ae4dcf268f0410d0b1373c3369f67351d..2e3304888ffc1c10e07b83fcec088d61dce6004d 100644 --- a/Documentation/devicetree/bindings/mfd/tps65910.txt +++ b/Documentation/devicetree/bindings/mfd/tps65910.txt @@ -59,6 +59,8 @@ Optional properties: in TPS6591X datasheet) - ti,en-gpio-sleep: enable sleep control for gpios There should be 9 entries here, one for each gpio. +- ti,system-power-controller: Telling whether or not this pmic is controlling + the system power. Regulator Optional properties: - ti,regulator-ext-sleep-control: enable external sleep @@ -79,6 +81,8 @@ Example: #interrupt-cells = <2>; interrupt-controller; + ti,system-power-controller; + ti,vmbch-threshold = 0; ti,vmbch2-threshold = 0; ti,en-ck32k-xtal; diff --git a/Documentation/devicetree/bindings/mfd/twl4030-audio.txt b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt new file mode 100644 index 0000000000000000000000000000000000000000..414d2ae0adf6e1f1baf5e6e0d85162c0cef38ca8 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt @@ -0,0 +1,46 @@ +Texas Instruments TWL family (twl4030) audio module + +The audio module inside the TWL family consist of an audio codec and a vibra +driver. + +Required properties: +- compatible : must be "ti,twl4030-audio" + +Optional properties, nodes: + +Audio functionality: +- codec { }: Need to be present if the audio functionality is used. Within this + section the following options can be used: +- ti,digimic_delay: Delay need after enabling the digimic to reduce artifacts + from the start of the recorded sample (in ms) +-ti,ramp_delay_value: HS ramp delay configuration to reduce pop noise +-ti,hs_extmute: Use external mute for HS pop reduction +-ti,hs_extmute_gpio: Use external GPIO to control the external mute +-ti,offset_cncl_path: Offset cancellation path selection, refer to TRM for the + valid values. + +Vibra functionality +- ti,enable-vibra: Need to be set to <1> if the vibra functionality is used. if + missing or it is 0, the vibra functionality is disabled. + +Example: +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + + ti,enable-vibra = <1>; + + codec { + ti,ramp_delay_value = <3>; + }; + + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt index c855240f3a0e0afec8fa3e6870f82dddde00ebcc..0f5dd709d752490815fab1a978b8c2ff1c1f383b 100644 --- a/Documentation/devicetree/bindings/mfd/twl6040.txt +++ b/Documentation/devicetree/bindings/mfd/twl6040.txt @@ -1,7 +1,7 @@ Texas Instruments TWL6040 family -The TWL6040s are 8-channel high quality low-power audio codecs providing audio -and vibra functionality on OMAP4+ platforms. +The TWL6040s are 8-channel high quality low-power audio codecs providing audio, +vibra and GPO functionality on OMAP4+ platforms. They are connected ot the host processor via i2c for commands, McPDM for audio data and commands. @@ -10,6 +10,8 @@ Required properties: - reg: must be 0x4b for i2c address - interrupts: twl6040 has one interrupt line connecteded to the main SoC - interrupt-parent: The parent interrupt controller +- gpio-controller: +- #gpio-cells = <1>: twl6040 provides GPO lines. - twl6040,audpwron-gpio: Power on GPIO line for the twl6040 - vio-supply: Regulator for the twl6040 VIO supply @@ -37,7 +39,6 @@ Example: &i2c1 { twl6040: twl@4b { compatible = "ti,twl6040"; - reg = <0x4b>; interrupts = <0 119 4>; interrupt-parent = <&gic>; @@ -60,3 +61,5 @@ Example: }; }; }; + +/include/ "twl6040.dtsi" diff --git a/Documentation/devicetree/bindings/misc/at25.txt b/Documentation/devicetree/bindings/misc/at25.txt index ab3c327929dd26c09f19272219a4c8c26b7d3dd3..1d3447165c374f673aa9a717f94f2387cfd852f1 100644 --- a/Documentation/devicetree/bindings/misc/at25.txt +++ b/Documentation/devicetree/bindings/misc/at25.txt @@ -1,21 +1,35 @@ -Atmel AT25 eeprom +EEPROMs (SPI) compatible with Atmel at25. Required properties: - compatible : "atmel,at25". - reg : chip select number - spi-max-frequency : max spi frequency to use +- pagesize : size of the eeprom page +- size : total eeprom size in bytes +- address-width : number of address bits (one of 8, 16, or 24) +Optional properties: +- spi-cpha : SPI shifted clock phase, as per spi-bus bindings. +- spi-cpol : SPI inverse clock polarity, as per spi-bus bindings. +- read-only : this parameter-less property disables writes to the eeprom + +Obsolete legacy properties are can be used in place of "size", "pagesize", +"address-width", and "read-only": - at25,byte-len : total eeprom size in bytes - at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h - at25,page-size : size of the eeprom page -Examples: -at25@0 { - compatible = "atmel,at25"; - reg = <0> - spi-max-frequency = <5000000>; +Additional compatible properties are also allowed. + +Example: + at25@0 { + compatible = "atmel,at25", "st,m95256"; + reg = <0> + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; - at25,byte-len = <0x8000>; - at25,addr-mode = <2>; - at25,page-size = <64>; -}; + pagesize = <64>; + size = <32768>; + address-width = <16>; + }; diff --git a/Documentation/devicetree/bindings/misc/ifm-csi.txt b/Documentation/devicetree/bindings/misc/ifm-csi.txt new file mode 100644 index 0000000000000000000000000000000000000000..5bdfffb0b9f7c00ffcbe6c313d5c17f2b72dab1e --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ifm-csi.txt @@ -0,0 +1,41 @@ +IFM camera sensor interface on mpc5200 LocalPlus bus + +Required properties: +- compatible: "ifm,o2d-csi" +- reg: specifies sensor chip select number and associated address range +- interrupts: external interrupt line number and interrupt sense mode + of the interrupt line signaling frame valid events +- gpios: three gpio-specifiers for "capture", "reset" and "master enable" + GPIOs (strictly in this order). +- ifm,csi-clk-handle: the phandle to a node in the DT describing the sensor + clock generator. This node is usually a general purpose timer controller. +- ifm,csi-addr-bus-width: address bus width (valid values are 16, 24, 25) +- ifm,csi-data-bus-width: data bus width (valid values are 8 and 16) +- ifm,csi-wait-cycles: sensor bus wait cycles + +Optional properties: +- ifm,csi-byte-swap: if this property is present, the byte swapping on + the bus will be enabled. + +Example: + + csi@3,0 { + compatible = "ifm,o2d-csi"; + reg = <3 0 0x00100000>; /* CS 3, 1 MiB range */ + interrupts = <1 1 2>; /* IRQ1, edge falling */ + + ifm,csi-clk-handle = <&timer7>; + gpios = <&gpio_simple 23 0 /* image_capture */ + &gpio_simple 26 0 /* image_reset */ + &gpio_simple 29 0>; /* image_master_en */ + + ifm,csi-addr-bus-width = <24>; + ifm,csi-data-bus-width = <8>; + ifm,csi-wait-cycles = <0>; + }; + +The base address of the used chip select is specified in the +ranges property of the parent localbus node, for example: + + ranges = <0 0 0xff000000 0x01000000 + 3 0 0xe3000000 0x00100000>; diff --git a/Documentation/devicetree/bindings/misc/lis302.txt b/Documentation/devicetree/bindings/misc/lis302.txt new file mode 100644 index 0000000000000000000000000000000000000000..6def86f6b053bea992004509bd812c4e56627aed --- /dev/null +++ b/Documentation/devicetree/bindings/misc/lis302.txt @@ -0,0 +1,112 @@ +LIS302 accelerometer devicetree bindings + +This device is matched via its bus drivers, and has a number of properties +that apply in on the generic device (independent from the bus). + + +Required properties for the SPI bindings: + - compatible: should be set to "st,lis3lv02d_spi" + - reg: the chipselect index + - spi-max-frequency: maximal bus speed, should be set to 1000000 unless + constrained by external circuitry + - interrupts: the interrupt generated by the device + +Required properties for the I2C bindings: + - compatible: should be set to "st,lis3lv02d" + - reg: i2c slave address + - Vdd-supply: The input supply for Vdd + - Vdd_IO-supply: The input supply for Vdd_IO + + +Optional properties for all bus drivers: + + - st,click-single-{x,y,z}: if present, tells the device to issue an + interrupt on single click events on the + x/y/z axis. + - st,click-double-{x,y,z}: if present, tells the device to issue an + interrupt on double click events on the + x/y/z axis. + - st,click-thresh-{x,y,z}: set the x/y/z axis threshold + - st,click-click-time-limit: click time limit, from 0 to 127.5msec + with step of 0.5 msec + - st,click-latency: click latency, from 0 to 255 msec with + step of 1 msec. + - st,click-window: click window, from 0 to 255 msec with + step of 1 msec. + - st,irq{1,2}-disable: disable IRQ 1/2 + - st,irq{1,2}-ff-wu-1: raise IRQ 1/2 on FF_WU_1 condition + - st,irq{1,2}-ff-wu-2: raise IRQ 1/2 on FF_WU_2 condition + - st,irq{1,2}-data-ready: raise IRQ 1/2 on data ready contition + - st,irq{1,2}-click: raise IRQ 1/2 on click condition + - st,irq-open-drain: consider IRQ lines open-drain + - st,irq-active-low: make IRQ lines active low + - st,wu-duration-1: duration register for Free-Fall/Wake-Up + interrupt 1 + - st,wu-duration-2: duration register for Free-Fall/Wake-Up + interrupt 2 + - st,wakeup-{x,y,z}-{lo,hi}: set wakeup condition on x/y/z axis for + upper/lower limit + - st,highpass-cutoff-hz=: 1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of + highpass cut-off frequency + - st,hipass{1,2}-disable: disable highpass 1/2. + - st,default-rate=: set the default rate + - st,axis-{x,y,z}=: set the axis to map to the three coordinates + - st,{min,max}-limit-{x,y,z} set the min/max limits for x/y/z axis + (used by self-test) + + +Example for a SPI device node: + + lis302@0 { + compatible = "st,lis302dl-spi"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <104 0>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + }; + +Example for a I2C device node: + + lis331dlh: lis331dlh@18 { + compatible = "st,lis331dlh", "st,lis3lv02d"; + reg = <0x18>; + Vdd-supply = <&lis3_reg>; + Vdd_IO-supply = <&lis3_reg>; + + st,click-single-x; + st,click-single-y; + st,click-single-z; + st,click-thresh-x = <10>; + st,click-thresh-y = <10>; + st,click-thresh-z = <10>; + st,irq1-click; + st,irq2-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <120>; + st,min-limit-y = <120>; + st,min-limit-z = <140>; + st,max-limit-x = <550>; + st,max-limit-y = <550>; + st,max-limit-z = <750>; + }; + diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index 70cd49b1caa8c07e71b7d0855a9469fc989cb7f6..1dd622546d06b711bf262358b387b4bb9af3f68a 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -10,8 +10,8 @@ Required properties: - compatible : Should be "fsl,-esdhc" Optional properties: -- fsl,cd-internal : Indicate to use controller internal card detection -- fsl,wp-internal : Indicate to use controller internal write protection +- fsl,cd-controller : Indicate to use controller internal card detection +- fsl,wp-controller : Indicate to use controller internal write protection Examples: @@ -19,8 +19,8 @@ esdhc@70004000 { compatible = "fsl,imx51-esdhc"; reg = <0x70004000 0x4000>; interrupts = <1>; - fsl,cd-internal; - fsl,wp-internal; + fsl,cd-controller; + fsl,wp-controller; }; esdhc@70008000 { diff --git a/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt new file mode 100644 index 0000000000000000000000000000000000000000..f1421e2bbab7387a87e1885794b9688780d6de73 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/pxa3xx-nand.txt @@ -0,0 +1,31 @@ +PXA3xx NAND DT bindings + +Required properties: + + - compatible: Should be "marvell,pxa3xx-nand" + - reg: The register base for the controller + - interrupts: The interrupt to map + - #address-cells: Set to <1> if the node includes partitions + +Optional properties: + + - marvell,nand-enable-arbiter: Set to enable the bus arbiter + - marvell,nand-keep-config: Set to keep the NAND controller config as set + by the bootloader + - num-cs: Number of chipselect lines to usw + +Example: + + nand0: nand@43100000 { + compatible = "marvell,pxa3xx-nand"; + reg = <0x43100000 90>; + interrupts = <45>; + #address-cells = <1>; + + marvell,nand-enable-arbiter; + marvell,nand-keep-config; + num-cs = <1>; + + /* partitions (optional) */ + }; + diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt index 411727a3f82d6add5a7c1ca18aa01dbd30fe0ff5..c8ae996bd8f2e4403cd8c1bd7ed7507d9379f7d7 100644 --- a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt +++ b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt @@ -6,6 +6,9 @@ Required properties: - interrupts : Should contain 3 xgmac interrupts. The 1st is main interrupt. The 2nd is pwr mgt interrupt. The 3rd is low power state interrupt. +Optional properties: +- dma-coherent : Present if dma operations are coherent + Example: ethernet@fff50000 { diff --git a/Documentation/devicetree/bindings/net/can/c_can.txt b/Documentation/devicetree/bindings/net/can/c_can.txt new file mode 100644 index 0000000000000000000000000000000000000000..8f1ae81228e3a9bc5a330398eb1c146a84948d61 --- /dev/null +++ b/Documentation/devicetree/bindings/net/can/c_can.txt @@ -0,0 +1,49 @@ +Bosch C_CAN/D_CAN controller Device Tree Bindings +------------------------------------------------- + +Required properties: +- compatible : Should be "bosch,c_can" for C_CAN controllers and + "bosch,d_can" for D_CAN controllers. +- reg : physical base address and size of the C_CAN/D_CAN + registers map +- interrupts : property with a value describing the interrupt + number + +Optional properties: +- ti,hwmods : Must be "d_can" or "c_can", n being the + instance number + +Note: "ti,hwmods" field is used to fetch the base address and irq +resources from TI, omap hwmod data base during device registration. +Future plan is to migrate hwmod data base contents into device tree +blob so that, all the required data will be used from device tree dts +file. + +Example: + +Step1: SoC common .dtsi file + + dcan1: d_can@481d0000 { + compatible = "bosch,d_can"; + reg = <0x481d0000 0x2000>; + interrupts = <55>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + +(or) + + dcan1: d_can@481d0000 { + compatible = "bosch,d_can"; + ti,hwmods = "d_can1"; + reg = <0x481d0000 0x2000>; + interrupts = <55>; + interrupt-parent = <&intc>; + status = "disabled"; + }; + +Step 2: board specific .dts file + + &dcan1 { + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/net/cpsw.txt b/Documentation/devicetree/bindings/net/cpsw.txt new file mode 100644 index 0000000000000000000000000000000000000000..dcaabe9fe869d7f029f413d6d97335549974fd05 --- /dev/null +++ b/Documentation/devicetree/bindings/net/cpsw.txt @@ -0,0 +1,109 @@ +TI SoC Ethernet Switch Controller Device Tree Bindings +------------------------------------------------------ + +Required properties: +- compatible : Should be "ti,cpsw" +- reg : physical base address and size of the cpsw + registers map +- interrupts : property with a value describing the interrupt + number +- interrupt-parent : The parent interrupt controller +- cpdma_channels : Specifies number of channels in CPDMA +- host_port_no : Specifies host port shift +- cpdma_reg_ofs : Specifies CPDMA submodule register offset +- cpdma_sram_ofs : Specifies CPDMA SRAM offset +- ale_reg_ofs : Specifies ALE submodule register offset +- ale_entries : Specifies No of entries ALE can hold +- host_port_reg_ofs : Specifies host port register offset +- hw_stats_reg_ofs : Specifies hardware statistics register offset +- bd_ram_ofs : Specifies internal desciptor RAM offset +- bd_ram_size : Specifies internal descriptor RAM size +- rx_descs : Specifies number of Rx descriptors +- mac_control : Specifies Default MAC control register content + for the specific platform +- slaves : Specifies number for slaves +- slave_reg_ofs : Specifies slave register offset +- sliver_reg_ofs : Specifies slave sliver register offset +- phy_id : Specifies slave phy id +- mac-address : Specifies slave MAC address + +Optional properties: +- ti,hwmods : Must be "cpgmac0" +- no_bd_ram : Must be 0 or 1 + +Note: "ti,hwmods" field is used to fetch the base address and irq +resources from TI, omap hwmod data base during device registration. +Future plan is to migrate hwmod data base contents into device tree +blob so that, all the required data will be used from device tree dts +file. + +Examples: + + mac: ethernet@4A100000 { + compatible = "ti,cpsw"; + reg = <0x4A100000 0x1000>; + interrupts = <55 0x4>; + interrupt-parent = <&intc>; + cpdma_channels = <8>; + host_port_no = <0>; + cpdma_reg_ofs = <0x800>; + cpdma_sram_ofs = <0xa00>; + ale_reg_ofs = <0xd00>; + ale_entries = <1024>; + host_port_reg_ofs = <0x108>; + hw_stats_reg_ofs = <0x900>; + bd_ram_ofs = <0x2000>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + cpsw_emac0: slave@0 { + slave_reg_ofs = <0x208>; + sliver_reg_ofs = <0xd80>; + phy_id = "davinci_mdio.16:00"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + cpsw_emac1: slave@1 { + slave_reg_ofs = <0x308>; + sliver_reg_ofs = <0xdc0>; + phy_id = "davinci_mdio.16:01"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; + +(or) + mac: ethernet@4A100000 { + compatible = "ti,cpsw"; + ti,hwmods = "cpgmac0"; + cpdma_channels = <8>; + host_port_no = <0>; + cpdma_reg_ofs = <0x800>; + cpdma_sram_ofs = <0xa00>; + ale_reg_ofs = <0xd00>; + ale_entries = <1024>; + host_port_reg_ofs = <0x108>; + hw_stats_reg_ofs = <0x900>; + bd_ram_ofs = <0x2000>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + cpsw_emac0: slave@0 { + slave_reg_ofs = <0x208>; + sliver_reg_ofs = <0xd80>; + phy_id = "davinci_mdio.16:00"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + cpsw_emac1: slave@1 { + slave_reg_ofs = <0x308>; + sliver_reg_ofs = <0xdc0>; + phy_id = "davinci_mdio.16:01"; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + }; diff --git a/Documentation/devicetree/bindings/net/davinci-mdio.txt b/Documentation/devicetree/bindings/net/davinci-mdio.txt new file mode 100644 index 0000000000000000000000000000000000000000..72efaaf764f728479841b9941ee4e23c0ec52487 --- /dev/null +++ b/Documentation/devicetree/bindings/net/davinci-mdio.txt @@ -0,0 +1,33 @@ +TI SoC Davinci MDIO Controller Device Tree Bindings +--------------------------------------------------- + +Required properties: +- compatible : Should be "ti,davinci_mdio" +- reg : physical base address and size of the davinci mdio + registers map +- bus_freq : Mdio Bus frequency + +Optional properties: +- ti,hwmods : Must be "davinci_mdio" + +Note: "ti,hwmods" field is used to fetch the base address and irq +resources from TI, omap hwmod data base during device registration. +Future plan is to migrate hwmod data base contents into device tree +blob so that, all the required data will be used from device tree dts +file. + +Examples: + + mdio: davinci_mdio@4A101000 { + compatible = "ti,cpsw"; + reg = <0x4A101000 0x1000>; + bus_freq = <1000000>; + }; + +(or) + + mdio: davinci_mdio@4A101000 { + compatible = "ti,cpsw"; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + }; diff --git a/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt new file mode 100644 index 0000000000000000000000000000000000000000..8516929c7251877615b0081ae6d3c971b8a0c920 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mdio-mux-mmioreg.txt @@ -0,0 +1,75 @@ +Properties for an MDIO bus multiplexer controlled by a memory-mapped device + +This is a special case of a MDIO bus multiplexer. A memory-mapped device, +like an FPGA, is used to control which child bus is connected. The mdio-mux +node must be a child of the memory-mapped device. The driver currently only +supports devices with eight-bit registers. + +Required properties in addition to the generic multiplexer properties: + +- compatible : string, must contain "mdio-mux-mmioreg" + +- reg : integer, contains the offset of the register that controls the bus + multiplexer. The size field in the 'reg' property is the size of + register, and must therefore be 1. + +- mux-mask : integer, contains an eight-bit mask that specifies which + bits in the register control the actual bus multiplexer. The + 'reg' property of each child mdio-mux node must be constrained by + this mask. + +Example: + +The FPGA node defines a memory-mapped FPGA with a register space of 0x30 bytes. +For the "EMI2" MDIO bus, register 9 (BRDCFG1) controls the mux on that bus. +A bitmask of 0x6 means that bits 1 and 2 (bit 0 is lsb) are the bits on +BRDCFG1 that control the actual mux. + + /* The FPGA node */ + fpga: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,p5020ds-fpga", "fsl,fpga-ngpixis"; + reg = <3 0 0x30>; + ranges = <0 3 0 0x30>; + + mdio-mux-emi2 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + mdio-parent-bus = <&xmdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <9 1>; // BRDCFG1 + mux-mask = <0x6>; // EMI2 + + emi2_slot1: mdio@0 { // Slot 1 XAUI (FM2) + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + + phy_xgmii_slot1: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <4>; + }; + }; + + emi2_slot2: mdio@2 { // Slot 2 XAUI (FM1) + reg = <2>; + #address-cells = <1>; + #size-cells = <0>; + + phy_xgmii_slot2: ethernet-phy@4 { + compatible = "ethernet-phy-ieee802.3-c45"; + reg = <0>; + }; + }; + }; + }; + + /* The parent MDIO bus. */ + xmdio0: mdio@f1000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,fman-xmdio"; + reg = <0xf1000 0x1000>; + interrupts = <100 1 0 0>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt new file mode 100644 index 0000000000000000000000000000000000000000..8edc20e1b09e3e1f2a8b2610d7fede5419d0b7a5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt @@ -0,0 +1,74 @@ +Broadcom BCM2835 GPIO (and pinmux) controller + +The BCM2835 GPIO module is a combined GPIO controller, (GPIO) interrupt +controller, and pinmux/control device. + +Required properties: +- compatible: "brcm,bcm2835-gpio" +- reg: Should contain the physical address of the GPIO module's registes. +- gpio-controller: Marks the device node as a GPIO controller. +- #gpio-cells : Should be two. The first cell is the pin number and the + second cell is used to specify optional parameters: + - bit 0 specifies polarity (0 for normal, 1 for inverted) +- interrupts : The interrupt outputs from the controller. One interrupt per + individual bank followed by the "all banks" interrupt. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells : Should be 2. + The first cell is the GPIO number. + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + Valid combinations are 1, 2, 3, 4, 8. + +Please refer to ../gpio/gpio.txt for a general description of GPIO bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Each pin configuration node lists the pin(s) to which it applies, and one or +more of the mux function to select on those pin(s), and pull-up/down +configuration. Each subnode only affects those parameters that are explicitly +listed. In other words, a subnode that lists only a mux function implies no +information about any pull configuration. Similarly, a subnode that lists only +a pul parameter implies no information about the mux function. + +Required subnode-properties: +- brcm,pins: An array of cells. Each cell contains the ID of a pin. Valid IDs + are the integer GPIO IDs; 0==GPIO0, 1==GPIO1, ... 53==GPIO53. + +Optional subnode-properties: +- brcm,function: Integer, containing the function to mux to the pin(s): + 0: GPIO in + 1: GPIO out + 2: alt5 + 3: alt4 + 4: alt0 + 5: alt1 + 6: alt2 + 7: alt3 +- brcm,pull: Integer, representing the pull-down/up to apply to the pin(s): + 0: none + 1: down + 2: up + +Each of brcm,function and brcm,pull may contain either a single value which +will be applied to all pins in brcm,pins, or 1 value for each entry in +brcm,pins. + +Example: + + gpio: gpio { + compatible = "brcm,bcm2835-gpio"; + reg = <0x2200000 0xb4>; + interrupts = <2 17>, <2 19>, <2 18>, <2 20>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..1183f1a3be33f8c65691b492d5b4d8efb8f07ddb --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx35-pinctrl.txt @@ -0,0 +1,984 @@ +* Freescale IMX35 IOMUX Controller + +Please refer to fsl,imx-pinctrl.txt in this directory for common binding part +and usage. + +Required properties: +- compatible: "fsl,imx35-iomuxc" +- fsl,pins: two integers array, represents a group of pins mux and config + setting. The format is fsl,pins = , PIN_FUNC_ID is a + pin working on a specific function, CONFIG is the pad setting value like + pull-up for this pin. Please refer to imx35 datasheet for the valid pad + config settings. + +CONFIG bits definition: +PAD_CTL_DRIVE_VOLAGAGE_18 (1 << 13) +PAD_CTL_DRIVE_VOLAGAGE_33 (0 << 13) +PAD_CTL_HYS (1 << 8) +PAD_CTL_PKE (1 << 7) +PAD_CTL_PUE (1 << 6) +PAD_CTL_PUS_100K_DOWN (0 << 4) +PAD_CTL_PUS_47K_UP (1 << 4) +PAD_CTL_PUS_100K_UP (2 << 4) +PAD_CTL_PUS_22K_UP (3 << 4) +PAD_CTL_ODE_CMOS (0 << 3) +PAD_CTL_ODE_OPENDRAIN (1 << 3) +PAD_CTL_DSE_NOMINAL (0 << 1) +PAD_CTL_DSE_HIGH (1 << 1) +PAD_CTL_DSE_MAX (2 << 1) +PAD_CTL_SRE_FAST (1 << 0) +PAD_CTL_SRE_SLOW (0 << 0) + +See below for available PIN_FUNC_ID for imx35: +0 MX35_PAD_CAPTURE__GPT_CAPIN1 +1 MX35_PAD_CAPTURE__GPT_CMPOUT2 +2 MX35_PAD_CAPTURE__CSPI2_SS1 +3 MX35_PAD_CAPTURE__EPIT1_EPITO +4 MX35_PAD_CAPTURE__CCM_CLK32K +5 MX35_PAD_CAPTURE__GPIO1_4 +6 MX35_PAD_COMPARE__GPT_CMPOUT1 +7 MX35_PAD_COMPARE__GPT_CAPIN2 +8 MX35_PAD_COMPARE__GPT_CMPOUT3 +9 MX35_PAD_COMPARE__EPIT2_EPITO +10 MX35_PAD_COMPARE__GPIO1_5 +11 MX35_PAD_COMPARE__SDMA_EXTDMA_2 +12 MX35_PAD_WDOG_RST__WDOG_WDOG_B +13 MX35_PAD_WDOG_RST__IPU_FLASH_STROBE +14 MX35_PAD_WDOG_RST__GPIO1_6 +15 MX35_PAD_GPIO1_0__GPIO1_0 +16 MX35_PAD_GPIO1_0__CCM_PMIC_RDY +17 MX35_PAD_GPIO1_0__OWIRE_LINE +18 MX35_PAD_GPIO1_0__SDMA_EXTDMA_0 +19 MX35_PAD_GPIO1_1__GPIO1_1 +20 MX35_PAD_GPIO1_1__PWM_PWMO +21 MX35_PAD_GPIO1_1__CSPI1_SS2 +22 MX35_PAD_GPIO1_1__SCC_TAMPER_DETECT +23 MX35_PAD_GPIO1_1__SDMA_EXTDMA_1 +24 MX35_PAD_GPIO2_0__GPIO2_0 +25 MX35_PAD_GPIO2_0__USB_TOP_USBOTG_CLK +26 MX35_PAD_GPIO3_0__GPIO3_0 +27 MX35_PAD_GPIO3_0__USB_TOP_USBH2_CLK +28 MX35_PAD_RESET_IN_B__CCM_RESET_IN_B +29 MX35_PAD_POR_B__CCM_POR_B +30 MX35_PAD_CLKO__CCM_CLKO +31 MX35_PAD_CLKO__GPIO1_8 +32 MX35_PAD_BOOT_MODE0__CCM_BOOT_MODE_0 +33 MX35_PAD_BOOT_MODE1__CCM_BOOT_MODE_1 +34 MX35_PAD_CLK_MODE0__CCM_CLK_MODE_0 +35 MX35_PAD_CLK_MODE1__CCM_CLK_MODE_1 +36 MX35_PAD_POWER_FAIL__CCM_DSM_WAKEUP_INT_26 +37 MX35_PAD_VSTBY__CCM_VSTBY +38 MX35_PAD_VSTBY__GPIO1_7 +39 MX35_PAD_A0__EMI_EIM_DA_L_0 +40 MX35_PAD_A1__EMI_EIM_DA_L_1 +41 MX35_PAD_A2__EMI_EIM_DA_L_2 +42 MX35_PAD_A3__EMI_EIM_DA_L_3 +43 MX35_PAD_A4__EMI_EIM_DA_L_4 +44 MX35_PAD_A5__EMI_EIM_DA_L_5 +45 MX35_PAD_A6__EMI_EIM_DA_L_6 +46 MX35_PAD_A7__EMI_EIM_DA_L_7 +47 MX35_PAD_A8__EMI_EIM_DA_H_8 +48 MX35_PAD_A9__EMI_EIM_DA_H_9 +49 MX35_PAD_A10__EMI_EIM_DA_H_10 +50 MX35_PAD_MA10__EMI_MA10 +51 MX35_PAD_A11__EMI_EIM_DA_H_11 +52 MX35_PAD_A12__EMI_EIM_DA_H_12 +53 MX35_PAD_A13__EMI_EIM_DA_H_13 +54 MX35_PAD_A14__EMI_EIM_DA_H2_14 +55 MX35_PAD_A15__EMI_EIM_DA_H2_15 +56 MX35_PAD_A16__EMI_EIM_A_16 +57 MX35_PAD_A17__EMI_EIM_A_17 +58 MX35_PAD_A18__EMI_EIM_A_18 +59 MX35_PAD_A19__EMI_EIM_A_19 +60 MX35_PAD_A20__EMI_EIM_A_20 +61 MX35_PAD_A21__EMI_EIM_A_21 +62 MX35_PAD_A22__EMI_EIM_A_22 +63 MX35_PAD_A23__EMI_EIM_A_23 +64 MX35_PAD_A24__EMI_EIM_A_24 +65 MX35_PAD_A25__EMI_EIM_A_25 +66 MX35_PAD_SDBA1__EMI_EIM_SDBA1 +67 MX35_PAD_SDBA0__EMI_EIM_SDBA0 +68 MX35_PAD_SD0__EMI_DRAM_D_0 +69 MX35_PAD_SD1__EMI_DRAM_D_1 +70 MX35_PAD_SD2__EMI_DRAM_D_2 +71 MX35_PAD_SD3__EMI_DRAM_D_3 +72 MX35_PAD_SD4__EMI_DRAM_D_4 +73 MX35_PAD_SD5__EMI_DRAM_D_5 +74 MX35_PAD_SD6__EMI_DRAM_D_6 +75 MX35_PAD_SD7__EMI_DRAM_D_7 +76 MX35_PAD_SD8__EMI_DRAM_D_8 +77 MX35_PAD_SD9__EMI_DRAM_D_9 +78 MX35_PAD_SD10__EMI_DRAM_D_10 +79 MX35_PAD_SD11__EMI_DRAM_D_11 +80 MX35_PAD_SD12__EMI_DRAM_D_12 +81 MX35_PAD_SD13__EMI_DRAM_D_13 +82 MX35_PAD_SD14__EMI_DRAM_D_14 +83 MX35_PAD_SD15__EMI_DRAM_D_15 +84 MX35_PAD_SD16__EMI_DRAM_D_16 +85 MX35_PAD_SD17__EMI_DRAM_D_17 +86 MX35_PAD_SD18__EMI_DRAM_D_18 +87 MX35_PAD_SD19__EMI_DRAM_D_19 +88 MX35_PAD_SD20__EMI_DRAM_D_20 +89 MX35_PAD_SD21__EMI_DRAM_D_21 +90 MX35_PAD_SD22__EMI_DRAM_D_22 +91 MX35_PAD_SD23__EMI_DRAM_D_23 +92 MX35_PAD_SD24__EMI_DRAM_D_24 +93 MX35_PAD_SD25__EMI_DRAM_D_25 +94 MX35_PAD_SD26__EMI_DRAM_D_26 +95 MX35_PAD_SD27__EMI_DRAM_D_27 +96 MX35_PAD_SD28__EMI_DRAM_D_28 +97 MX35_PAD_SD29__EMI_DRAM_D_29 +98 MX35_PAD_SD30__EMI_DRAM_D_30 +99 MX35_PAD_SD31__EMI_DRAM_D_31 +100 MX35_PAD_DQM0__EMI_DRAM_DQM_0 +101 MX35_PAD_DQM1__EMI_DRAM_DQM_1 +102 MX35_PAD_DQM2__EMI_DRAM_DQM_2 +103 MX35_PAD_DQM3__EMI_DRAM_DQM_3 +104 MX35_PAD_EB0__EMI_EIM_EB0_B +105 MX35_PAD_EB1__EMI_EIM_EB1_B +106 MX35_PAD_OE__EMI_EIM_OE +107 MX35_PAD_CS0__EMI_EIM_CS0 +108 MX35_PAD_CS1__EMI_EIM_CS1 +109 MX35_PAD_CS1__EMI_NANDF_CE3 +110 MX35_PAD_CS2__EMI_EIM_CS2 +111 MX35_PAD_CS3__EMI_EIM_CS3 +112 MX35_PAD_CS4__EMI_EIM_CS4 +113 MX35_PAD_CS4__EMI_DTACK_B +114 MX35_PAD_CS4__EMI_NANDF_CE1 +115 MX35_PAD_CS4__GPIO1_20 +116 MX35_PAD_CS5__EMI_EIM_CS5 +117 MX35_PAD_CS5__CSPI2_SS2 +118 MX35_PAD_CS5__CSPI1_SS2 +119 MX35_PAD_CS5__EMI_NANDF_CE2 +120 MX35_PAD_CS5__GPIO1_21 +121 MX35_PAD_NF_CE0__EMI_NANDF_CE0 +122 MX35_PAD_NF_CE0__GPIO1_22 +123 MX35_PAD_ECB__EMI_EIM_ECB +124 MX35_PAD_LBA__EMI_EIM_LBA +125 MX35_PAD_BCLK__EMI_EIM_BCLK +126 MX35_PAD_RW__EMI_EIM_RW +127 MX35_PAD_RAS__EMI_DRAM_RAS +128 MX35_PAD_CAS__EMI_DRAM_CAS +129 MX35_PAD_SDWE__EMI_DRAM_SDWE +130 MX35_PAD_SDCKE0__EMI_DRAM_SDCKE_0 +131 MX35_PAD_SDCKE1__EMI_DRAM_SDCKE_1 +132 MX35_PAD_SDCLK__EMI_DRAM_SDCLK +133 MX35_PAD_SDQS0__EMI_DRAM_SDQS_0 +134 MX35_PAD_SDQS1__EMI_DRAM_SDQS_1 +135 MX35_PAD_SDQS2__EMI_DRAM_SDQS_2 +136 MX35_PAD_SDQS3__EMI_DRAM_SDQS_3 +137 MX35_PAD_NFWE_B__EMI_NANDF_WE_B +138 MX35_PAD_NFWE_B__USB_TOP_USBH2_DATA_3 +139 MX35_PAD_NFWE_B__IPU_DISPB_D0_VSYNC +140 MX35_PAD_NFWE_B__GPIO2_18 +141 MX35_PAD_NFWE_B__ARM11P_TOP_TRACE_0 +142 MX35_PAD_NFRE_B__EMI_NANDF_RE_B +143 MX35_PAD_NFRE_B__USB_TOP_USBH2_DIR +144 MX35_PAD_NFRE_B__IPU_DISPB_BCLK +145 MX35_PAD_NFRE_B__GPIO2_19 +146 MX35_PAD_NFRE_B__ARM11P_TOP_TRACE_1 +147 MX35_PAD_NFALE__EMI_NANDF_ALE +148 MX35_PAD_NFALE__USB_TOP_USBH2_STP +149 MX35_PAD_NFALE__IPU_DISPB_CS0 +150 MX35_PAD_NFALE__GPIO2_20 +151 MX35_PAD_NFALE__ARM11P_TOP_TRACE_2 +152 MX35_PAD_NFCLE__EMI_NANDF_CLE +153 MX35_PAD_NFCLE__USB_TOP_USBH2_NXT +154 MX35_PAD_NFCLE__IPU_DISPB_PAR_RS +155 MX35_PAD_NFCLE__GPIO2_21 +156 MX35_PAD_NFCLE__ARM11P_TOP_TRACE_3 +157 MX35_PAD_NFWP_B__EMI_NANDF_WP_B +158 MX35_PAD_NFWP_B__USB_TOP_USBH2_DATA_7 +159 MX35_PAD_NFWP_B__IPU_DISPB_WR +160 MX35_PAD_NFWP_B__GPIO2_22 +161 MX35_PAD_NFWP_B__ARM11P_TOP_TRCTL +162 MX35_PAD_NFRB__EMI_NANDF_RB +163 MX35_PAD_NFRB__IPU_DISPB_RD +164 MX35_PAD_NFRB__GPIO2_23 +165 MX35_PAD_NFRB__ARM11P_TOP_TRCLK +166 MX35_PAD_D15__EMI_EIM_D_15 +167 MX35_PAD_D14__EMI_EIM_D_14 +168 MX35_PAD_D13__EMI_EIM_D_13 +169 MX35_PAD_D12__EMI_EIM_D_12 +170 MX35_PAD_D11__EMI_EIM_D_11 +171 MX35_PAD_D10__EMI_EIM_D_10 +172 MX35_PAD_D9__EMI_EIM_D_9 +173 MX35_PAD_D8__EMI_EIM_D_8 +174 MX35_PAD_D7__EMI_EIM_D_7 +175 MX35_PAD_D6__EMI_EIM_D_6 +176 MX35_PAD_D5__EMI_EIM_D_5 +177 MX35_PAD_D4__EMI_EIM_D_4 +178 MX35_PAD_D3__EMI_EIM_D_3 +179 MX35_PAD_D2__EMI_EIM_D_2 +180 MX35_PAD_D1__EMI_EIM_D_1 +181 MX35_PAD_D0__EMI_EIM_D_0 +182 MX35_PAD_CSI_D8__IPU_CSI_D_8 +183 MX35_PAD_CSI_D8__KPP_COL_0 +184 MX35_PAD_CSI_D8__GPIO1_20 +185 MX35_PAD_CSI_D8__ARM11P_TOP_EVNTBUS_13 +186 MX35_PAD_CSI_D9__IPU_CSI_D_9 +187 MX35_PAD_CSI_D9__KPP_COL_1 +188 MX35_PAD_CSI_D9__GPIO1_21 +189 MX35_PAD_CSI_D9__ARM11P_TOP_EVNTBUS_14 +190 MX35_PAD_CSI_D10__IPU_CSI_D_10 +191 MX35_PAD_CSI_D10__KPP_COL_2 +192 MX35_PAD_CSI_D10__GPIO1_22 +193 MX35_PAD_CSI_D10__ARM11P_TOP_EVNTBUS_15 +194 MX35_PAD_CSI_D11__IPU_CSI_D_11 +195 MX35_PAD_CSI_D11__KPP_COL_3 +196 MX35_PAD_CSI_D11__GPIO1_23 +197 MX35_PAD_CSI_D12__IPU_CSI_D_12 +198 MX35_PAD_CSI_D12__KPP_ROW_0 +199 MX35_PAD_CSI_D12__GPIO1_24 +200 MX35_PAD_CSI_D13__IPU_CSI_D_13 +201 MX35_PAD_CSI_D13__KPP_ROW_1 +202 MX35_PAD_CSI_D13__GPIO1_25 +203 MX35_PAD_CSI_D14__IPU_CSI_D_14 +204 MX35_PAD_CSI_D14__KPP_ROW_2 +205 MX35_PAD_CSI_D14__GPIO1_26 +206 MX35_PAD_CSI_D15__IPU_CSI_D_15 +207 MX35_PAD_CSI_D15__KPP_ROW_3 +208 MX35_PAD_CSI_D15__GPIO1_27 +209 MX35_PAD_CSI_MCLK__IPU_CSI_MCLK +210 MX35_PAD_CSI_MCLK__GPIO1_28 +211 MX35_PAD_CSI_VSYNC__IPU_CSI_VSYNC +212 MX35_PAD_CSI_VSYNC__GPIO1_29 +213 MX35_PAD_CSI_HSYNC__IPU_CSI_HSYNC +214 MX35_PAD_CSI_HSYNC__GPIO1_30 +215 MX35_PAD_CSI_PIXCLK__IPU_CSI_PIXCLK +216 MX35_PAD_CSI_PIXCLK__GPIO1_31 +217 MX35_PAD_I2C1_CLK__I2C1_SCL +218 MX35_PAD_I2C1_CLK__GPIO2_24 +219 MX35_PAD_I2C1_CLK__CCM_USB_BYP_CLK +220 MX35_PAD_I2C1_DAT__I2C1_SDA +221 MX35_PAD_I2C1_DAT__GPIO2_25 +222 MX35_PAD_I2C2_CLK__I2C2_SCL +223 MX35_PAD_I2C2_CLK__CAN1_TXCAN +224 MX35_PAD_I2C2_CLK__USB_TOP_USBH2_PWR +225 MX35_PAD_I2C2_CLK__GPIO2_26 +226 MX35_PAD_I2C2_CLK__SDMA_DEBUG_BUS_DEVICE_2 +227 MX35_PAD_I2C2_DAT__I2C2_SDA +228 MX35_PAD_I2C2_DAT__CAN1_RXCAN +229 MX35_PAD_I2C2_DAT__USB_TOP_USBH2_OC +230 MX35_PAD_I2C2_DAT__GPIO2_27 +231 MX35_PAD_I2C2_DAT__SDMA_DEBUG_BUS_DEVICE_3 +232 MX35_PAD_STXD4__AUDMUX_AUD4_TXD +233 MX35_PAD_STXD4__GPIO2_28 +234 MX35_PAD_STXD4__ARM11P_TOP_ARM_COREASID0 +235 MX35_PAD_SRXD4__AUDMUX_AUD4_RXD +236 MX35_PAD_SRXD4__GPIO2_29 +237 MX35_PAD_SRXD4__ARM11P_TOP_ARM_COREASID1 +238 MX35_PAD_SCK4__AUDMUX_AUD4_TXC +239 MX35_PAD_SCK4__GPIO2_30 +240 MX35_PAD_SCK4__ARM11P_TOP_ARM_COREASID2 +241 MX35_PAD_STXFS4__AUDMUX_AUD4_TXFS +242 MX35_PAD_STXFS4__GPIO2_31 +243 MX35_PAD_STXFS4__ARM11P_TOP_ARM_COREASID3 +244 MX35_PAD_STXD5__AUDMUX_AUD5_TXD +245 MX35_PAD_STXD5__SPDIF_SPDIF_OUT1 +246 MX35_PAD_STXD5__CSPI2_MOSI +247 MX35_PAD_STXD5__GPIO1_0 +248 MX35_PAD_STXD5__ARM11P_TOP_ARM_COREASID4 +249 MX35_PAD_SRXD5__AUDMUX_AUD5_RXD +250 MX35_PAD_SRXD5__SPDIF_SPDIF_IN1 +251 MX35_PAD_SRXD5__CSPI2_MISO +252 MX35_PAD_SRXD5__GPIO1_1 +253 MX35_PAD_SRXD5__ARM11P_TOP_ARM_COREASID5 +254 MX35_PAD_SCK5__AUDMUX_AUD5_TXC +255 MX35_PAD_SCK5__SPDIF_SPDIF_EXTCLK +256 MX35_PAD_SCK5__CSPI2_SCLK +257 MX35_PAD_SCK5__GPIO1_2 +258 MX35_PAD_SCK5__ARM11P_TOP_ARM_COREASID6 +259 MX35_PAD_STXFS5__AUDMUX_AUD5_TXFS +260 MX35_PAD_STXFS5__CSPI2_RDY +261 MX35_PAD_STXFS5__GPIO1_3 +262 MX35_PAD_STXFS5__ARM11P_TOP_ARM_COREASID7 +263 MX35_PAD_SCKR__ESAI_SCKR +264 MX35_PAD_SCKR__GPIO1_4 +265 MX35_PAD_SCKR__ARM11P_TOP_EVNTBUS_10 +266 MX35_PAD_FSR__ESAI_FSR +267 MX35_PAD_FSR__GPIO1_5 +268 MX35_PAD_FSR__ARM11P_TOP_EVNTBUS_11 +269 MX35_PAD_HCKR__ESAI_HCKR +270 MX35_PAD_HCKR__AUDMUX_AUD5_RXFS +271 MX35_PAD_HCKR__CSPI2_SS0 +272 MX35_PAD_HCKR__IPU_FLASH_STROBE +273 MX35_PAD_HCKR__GPIO1_6 +274 MX35_PAD_HCKR__ARM11P_TOP_EVNTBUS_12 +275 MX35_PAD_SCKT__ESAI_SCKT +276 MX35_PAD_SCKT__GPIO1_7 +277 MX35_PAD_SCKT__IPU_CSI_D_0 +278 MX35_PAD_SCKT__KPP_ROW_2 +279 MX35_PAD_FST__ESAI_FST +280 MX35_PAD_FST__GPIO1_8 +281 MX35_PAD_FST__IPU_CSI_D_1 +282 MX35_PAD_FST__KPP_ROW_3 +283 MX35_PAD_HCKT__ESAI_HCKT +284 MX35_PAD_HCKT__AUDMUX_AUD5_RXC +285 MX35_PAD_HCKT__GPIO1_9 +286 MX35_PAD_HCKT__IPU_CSI_D_2 +287 MX35_PAD_HCKT__KPP_COL_3 +288 MX35_PAD_TX5_RX0__ESAI_TX5_RX0 +289 MX35_PAD_TX5_RX0__AUDMUX_AUD4_RXC +290 MX35_PAD_TX5_RX0__CSPI2_SS2 +291 MX35_PAD_TX5_RX0__CAN2_TXCAN +292 MX35_PAD_TX5_RX0__UART2_DTR +293 MX35_PAD_TX5_RX0__GPIO1_10 +294 MX35_PAD_TX5_RX0__EMI_M3IF_CHOSEN_MASTER_0 +295 MX35_PAD_TX4_RX1__ESAI_TX4_RX1 +296 MX35_PAD_TX4_RX1__AUDMUX_AUD4_RXFS +297 MX35_PAD_TX4_RX1__CSPI2_SS3 +298 MX35_PAD_TX4_RX1__CAN2_RXCAN +299 MX35_PAD_TX4_RX1__UART2_DSR +300 MX35_PAD_TX4_RX1__GPIO1_11 +301 MX35_PAD_TX4_RX1__IPU_CSI_D_3 +302 MX35_PAD_TX4_RX1__KPP_ROW_0 +303 MX35_PAD_TX3_RX2__ESAI_TX3_RX2 +304 MX35_PAD_TX3_RX2__I2C3_SCL +305 MX35_PAD_TX3_RX2__EMI_NANDF_CE1 +306 MX35_PAD_TX3_RX2__GPIO1_12 +307 MX35_PAD_TX3_RX2__IPU_CSI_D_4 +308 MX35_PAD_TX3_RX2__KPP_ROW_1 +309 MX35_PAD_TX2_RX3__ESAI_TX2_RX3 +310 MX35_PAD_TX2_RX3__I2C3_SDA +311 MX35_PAD_TX2_RX3__EMI_NANDF_CE2 +312 MX35_PAD_TX2_RX3__GPIO1_13 +313 MX35_PAD_TX2_RX3__IPU_CSI_D_5 +314 MX35_PAD_TX2_RX3__KPP_COL_0 +315 MX35_PAD_TX1__ESAI_TX1 +316 MX35_PAD_TX1__CCM_PMIC_RDY +317 MX35_PAD_TX1__CSPI1_SS2 +318 MX35_PAD_TX1__EMI_NANDF_CE3 +319 MX35_PAD_TX1__UART2_RI +320 MX35_PAD_TX1__GPIO1_14 +321 MX35_PAD_TX1__IPU_CSI_D_6 +322 MX35_PAD_TX1__KPP_COL_1 +323 MX35_PAD_TX0__ESAI_TX0 +324 MX35_PAD_TX0__SPDIF_SPDIF_EXTCLK +325 MX35_PAD_TX0__CSPI1_SS3 +326 MX35_PAD_TX0__EMI_DTACK_B +327 MX35_PAD_TX0__UART2_DCD +328 MX35_PAD_TX0__GPIO1_15 +329 MX35_PAD_TX0__IPU_CSI_D_7 +330 MX35_PAD_TX0__KPP_COL_2 +331 MX35_PAD_CSPI1_MOSI__CSPI1_MOSI +332 MX35_PAD_CSPI1_MOSI__GPIO1_16 +333 MX35_PAD_CSPI1_MOSI__ECT_CTI_TRIG_OUT1_2 +334 MX35_PAD_CSPI1_MISO__CSPI1_MISO +335 MX35_PAD_CSPI1_MISO__GPIO1_17 +336 MX35_PAD_CSPI1_MISO__ECT_CTI_TRIG_OUT1_3 +337 MX35_PAD_CSPI1_SS0__CSPI1_SS0 +338 MX35_PAD_CSPI1_SS0__OWIRE_LINE +339 MX35_PAD_CSPI1_SS0__CSPI2_SS3 +340 MX35_PAD_CSPI1_SS0__GPIO1_18 +341 MX35_PAD_CSPI1_SS0__ECT_CTI_TRIG_OUT1_4 +342 MX35_PAD_CSPI1_SS1__CSPI1_SS1 +343 MX35_PAD_CSPI1_SS1__PWM_PWMO +344 MX35_PAD_CSPI1_SS1__CCM_CLK32K +345 MX35_PAD_CSPI1_SS1__GPIO1_19 +346 MX35_PAD_CSPI1_SS1__IPU_DIAGB_29 +347 MX35_PAD_CSPI1_SS1__ECT_CTI_TRIG_OUT1_5 +348 MX35_PAD_CSPI1_SCLK__CSPI1_SCLK +349 MX35_PAD_CSPI1_SCLK__GPIO3_4 +350 MX35_PAD_CSPI1_SCLK__IPU_DIAGB_30 +351 MX35_PAD_CSPI1_SCLK__EMI_M3IF_CHOSEN_MASTER_1 +352 MX35_PAD_CSPI1_SPI_RDY__CSPI1_RDY +353 MX35_PAD_CSPI1_SPI_RDY__GPIO3_5 +354 MX35_PAD_CSPI1_SPI_RDY__IPU_DIAGB_31 +355 MX35_PAD_CSPI1_SPI_RDY__EMI_M3IF_CHOSEN_MASTER_2 +356 MX35_PAD_RXD1__UART1_RXD_MUX +357 MX35_PAD_RXD1__CSPI2_MOSI +358 MX35_PAD_RXD1__KPP_COL_4 +359 MX35_PAD_RXD1__GPIO3_6 +360 MX35_PAD_RXD1__ARM11P_TOP_EVNTBUS_16 +361 MX35_PAD_TXD1__UART1_TXD_MUX +362 MX35_PAD_TXD1__CSPI2_MISO +363 MX35_PAD_TXD1__KPP_COL_5 +364 MX35_PAD_TXD1__GPIO3_7 +365 MX35_PAD_TXD1__ARM11P_TOP_EVNTBUS_17 +366 MX35_PAD_RTS1__UART1_RTS +367 MX35_PAD_RTS1__CSPI2_SCLK +368 MX35_PAD_RTS1__I2C3_SCL +369 MX35_PAD_RTS1__IPU_CSI_D_0 +370 MX35_PAD_RTS1__KPP_COL_6 +371 MX35_PAD_RTS1__GPIO3_8 +372 MX35_PAD_RTS1__EMI_NANDF_CE1 +373 MX35_PAD_RTS1__ARM11P_TOP_EVNTBUS_18 +374 MX35_PAD_CTS1__UART1_CTS +375 MX35_PAD_CTS1__CSPI2_RDY +376 MX35_PAD_CTS1__I2C3_SDA +377 MX35_PAD_CTS1__IPU_CSI_D_1 +378 MX35_PAD_CTS1__KPP_COL_7 +379 MX35_PAD_CTS1__GPIO3_9 +380 MX35_PAD_CTS1__EMI_NANDF_CE2 +381 MX35_PAD_CTS1__ARM11P_TOP_EVNTBUS_19 +382 MX35_PAD_RXD2__UART2_RXD_MUX +383 MX35_PAD_RXD2__KPP_ROW_4 +384 MX35_PAD_RXD2__GPIO3_10 +385 MX35_PAD_TXD2__UART2_TXD_MUX +386 MX35_PAD_TXD2__SPDIF_SPDIF_EXTCLK +387 MX35_PAD_TXD2__KPP_ROW_5 +388 MX35_PAD_TXD2__GPIO3_11 +389 MX35_PAD_RTS2__UART2_RTS +390 MX35_PAD_RTS2__SPDIF_SPDIF_IN1 +391 MX35_PAD_RTS2__CAN2_RXCAN +392 MX35_PAD_RTS2__IPU_CSI_D_2 +393 MX35_PAD_RTS2__KPP_ROW_6 +394 MX35_PAD_RTS2__GPIO3_12 +395 MX35_PAD_RTS2__AUDMUX_AUD5_RXC +396 MX35_PAD_RTS2__UART3_RXD_MUX +397 MX35_PAD_CTS2__UART2_CTS +398 MX35_PAD_CTS2__SPDIF_SPDIF_OUT1 +399 MX35_PAD_CTS2__CAN2_TXCAN +400 MX35_PAD_CTS2__IPU_CSI_D_3 +401 MX35_PAD_CTS2__KPP_ROW_7 +402 MX35_PAD_CTS2__GPIO3_13 +403 MX35_PAD_CTS2__AUDMUX_AUD5_RXFS +404 MX35_PAD_CTS2__UART3_TXD_MUX +405 MX35_PAD_RTCK__ARM11P_TOP_RTCK +406 MX35_PAD_TCK__SJC_TCK +407 MX35_PAD_TMS__SJC_TMS +408 MX35_PAD_TDI__SJC_TDI +409 MX35_PAD_TDO__SJC_TDO +410 MX35_PAD_TRSTB__SJC_TRSTB +411 MX35_PAD_DE_B__SJC_DE_B +412 MX35_PAD_SJC_MOD__SJC_MOD +413 MX35_PAD_USBOTG_PWR__USB_TOP_USBOTG_PWR +414 MX35_PAD_USBOTG_PWR__USB_TOP_USBH2_PWR +415 MX35_PAD_USBOTG_PWR__GPIO3_14 +416 MX35_PAD_USBOTG_OC__USB_TOP_USBOTG_OC +417 MX35_PAD_USBOTG_OC__USB_TOP_USBH2_OC +418 MX35_PAD_USBOTG_OC__GPIO3_15 +419 MX35_PAD_LD0__IPU_DISPB_DAT_0 +420 MX35_PAD_LD0__GPIO2_0 +421 MX35_PAD_LD0__SDMA_SDMA_DEBUG_PC_0 +422 MX35_PAD_LD1__IPU_DISPB_DAT_1 +423 MX35_PAD_LD1__GPIO2_1 +424 MX35_PAD_LD1__SDMA_SDMA_DEBUG_PC_1 +425 MX35_PAD_LD2__IPU_DISPB_DAT_2 +426 MX35_PAD_LD2__GPIO2_2 +427 MX35_PAD_LD2__SDMA_SDMA_DEBUG_PC_2 +428 MX35_PAD_LD3__IPU_DISPB_DAT_3 +429 MX35_PAD_LD3__GPIO2_3 +430 MX35_PAD_LD3__SDMA_SDMA_DEBUG_PC_3 +431 MX35_PAD_LD4__IPU_DISPB_DAT_4 +432 MX35_PAD_LD4__GPIO2_4 +433 MX35_PAD_LD4__SDMA_SDMA_DEBUG_PC_4 +434 MX35_PAD_LD5__IPU_DISPB_DAT_5 +435 MX35_PAD_LD5__GPIO2_5 +436 MX35_PAD_LD5__SDMA_SDMA_DEBUG_PC_5 +437 MX35_PAD_LD6__IPU_DISPB_DAT_6 +438 MX35_PAD_LD6__GPIO2_6 +439 MX35_PAD_LD6__SDMA_SDMA_DEBUG_PC_6 +440 MX35_PAD_LD7__IPU_DISPB_DAT_7 +441 MX35_PAD_LD7__GPIO2_7 +442 MX35_PAD_LD7__SDMA_SDMA_DEBUG_PC_7 +443 MX35_PAD_LD8__IPU_DISPB_DAT_8 +444 MX35_PAD_LD8__GPIO2_8 +445 MX35_PAD_LD8__SDMA_SDMA_DEBUG_PC_8 +446 MX35_PAD_LD9__IPU_DISPB_DAT_9 +447 MX35_PAD_LD9__GPIO2_9 +448 MX35_PAD_LD9__SDMA_SDMA_DEBUG_PC_9 +449 MX35_PAD_LD10__IPU_DISPB_DAT_10 +450 MX35_PAD_LD10__GPIO2_10 +451 MX35_PAD_LD10__SDMA_SDMA_DEBUG_PC_10 +452 MX35_PAD_LD11__IPU_DISPB_DAT_11 +453 MX35_PAD_LD11__GPIO2_11 +454 MX35_PAD_LD11__SDMA_SDMA_DEBUG_PC_11 +455 MX35_PAD_LD11__ARM11P_TOP_TRACE_4 +456 MX35_PAD_LD12__IPU_DISPB_DAT_12 +457 MX35_PAD_LD12__GPIO2_12 +458 MX35_PAD_LD12__SDMA_SDMA_DEBUG_PC_12 +459 MX35_PAD_LD12__ARM11P_TOP_TRACE_5 +460 MX35_PAD_LD13__IPU_DISPB_DAT_13 +461 MX35_PAD_LD13__GPIO2_13 +462 MX35_PAD_LD13__SDMA_SDMA_DEBUG_PC_13 +463 MX35_PAD_LD13__ARM11P_TOP_TRACE_6 +464 MX35_PAD_LD14__IPU_DISPB_DAT_14 +465 MX35_PAD_LD14__GPIO2_14 +466 MX35_PAD_LD14__SDMA_SDMA_DEBUG_EVENT_CHANNEL_0 +467 MX35_PAD_LD14__ARM11P_TOP_TRACE_7 +468 MX35_PAD_LD15__IPU_DISPB_DAT_15 +469 MX35_PAD_LD15__GPIO2_15 +470 MX35_PAD_LD15__SDMA_SDMA_DEBUG_EVENT_CHANNEL_1 +471 MX35_PAD_LD15__ARM11P_TOP_TRACE_8 +472 MX35_PAD_LD16__IPU_DISPB_DAT_16 +473 MX35_PAD_LD16__IPU_DISPB_D12_VSYNC +474 MX35_PAD_LD16__GPIO2_16 +475 MX35_PAD_LD16__SDMA_SDMA_DEBUG_EVENT_CHANNEL_2 +476 MX35_PAD_LD16__ARM11P_TOP_TRACE_9 +477 MX35_PAD_LD17__IPU_DISPB_DAT_17 +478 MX35_PAD_LD17__IPU_DISPB_CS2 +479 MX35_PAD_LD17__GPIO2_17 +480 MX35_PAD_LD17__SDMA_SDMA_DEBUG_EVENT_CHANNEL_3 +481 MX35_PAD_LD17__ARM11P_TOP_TRACE_10 +482 MX35_PAD_LD18__IPU_DISPB_DAT_18 +483 MX35_PAD_LD18__IPU_DISPB_D0_VSYNC +484 MX35_PAD_LD18__IPU_DISPB_D12_VSYNC +485 MX35_PAD_LD18__ESDHC3_CMD +486 MX35_PAD_LD18__USB_TOP_USBOTG_DATA_3 +487 MX35_PAD_LD18__GPIO3_24 +488 MX35_PAD_LD18__SDMA_SDMA_DEBUG_EVENT_CHANNEL_4 +489 MX35_PAD_LD18__ARM11P_TOP_TRACE_11 +490 MX35_PAD_LD19__IPU_DISPB_DAT_19 +491 MX35_PAD_LD19__IPU_DISPB_BCLK +492 MX35_PAD_LD19__IPU_DISPB_CS1 +493 MX35_PAD_LD19__ESDHC3_CLK +494 MX35_PAD_LD19__USB_TOP_USBOTG_DIR +495 MX35_PAD_LD19__GPIO3_25 +496 MX35_PAD_LD19__SDMA_SDMA_DEBUG_EVENT_CHANNEL_5 +497 MX35_PAD_LD19__ARM11P_TOP_TRACE_12 +498 MX35_PAD_LD20__IPU_DISPB_DAT_20 +499 MX35_PAD_LD20__IPU_DISPB_CS0 +500 MX35_PAD_LD20__IPU_DISPB_SD_CLK +501 MX35_PAD_LD20__ESDHC3_DAT0 +502 MX35_PAD_LD20__GPIO3_26 +503 MX35_PAD_LD20__SDMA_SDMA_DEBUG_CORE_STATUS_3 +504 MX35_PAD_LD20__ARM11P_TOP_TRACE_13 +505 MX35_PAD_LD21__IPU_DISPB_DAT_21 +506 MX35_PAD_LD21__IPU_DISPB_PAR_RS +507 MX35_PAD_LD21__IPU_DISPB_SER_RS +508 MX35_PAD_LD21__ESDHC3_DAT1 +509 MX35_PAD_LD21__USB_TOP_USBOTG_STP +510 MX35_PAD_LD21__GPIO3_27 +511 MX35_PAD_LD21__SDMA_DEBUG_EVENT_CHANNEL_SEL +512 MX35_PAD_LD21__ARM11P_TOP_TRACE_14 +513 MX35_PAD_LD22__IPU_DISPB_DAT_22 +514 MX35_PAD_LD22__IPU_DISPB_WR +515 MX35_PAD_LD22__IPU_DISPB_SD_D_I +516 MX35_PAD_LD22__ESDHC3_DAT2 +517 MX35_PAD_LD22__USB_TOP_USBOTG_NXT +518 MX35_PAD_LD22__GPIO3_28 +519 MX35_PAD_LD22__SDMA_DEBUG_BUS_ERROR +520 MX35_PAD_LD22__ARM11P_TOP_TRCTL +521 MX35_PAD_LD23__IPU_DISPB_DAT_23 +522 MX35_PAD_LD23__IPU_DISPB_RD +523 MX35_PAD_LD23__IPU_DISPB_SD_D_IO +524 MX35_PAD_LD23__ESDHC3_DAT3 +525 MX35_PAD_LD23__USB_TOP_USBOTG_DATA_7 +526 MX35_PAD_LD23__GPIO3_29 +527 MX35_PAD_LD23__SDMA_DEBUG_MATCHED_DMBUS +528 MX35_PAD_LD23__ARM11P_TOP_TRCLK +529 MX35_PAD_D3_HSYNC__IPU_DISPB_D3_HSYNC +530 MX35_PAD_D3_HSYNC__IPU_DISPB_SD_D_IO +531 MX35_PAD_D3_HSYNC__GPIO3_30 +532 MX35_PAD_D3_HSYNC__SDMA_DEBUG_RTBUFFER_WRITE +533 MX35_PAD_D3_HSYNC__ARM11P_TOP_TRACE_15 +534 MX35_PAD_D3_FPSHIFT__IPU_DISPB_D3_CLK +535 MX35_PAD_D3_FPSHIFT__IPU_DISPB_SD_CLK +536 MX35_PAD_D3_FPSHIFT__GPIO3_31 +537 MX35_PAD_D3_FPSHIFT__SDMA_SDMA_DEBUG_CORE_STATUS_0 +538 MX35_PAD_D3_FPSHIFT__ARM11P_TOP_TRACE_16 +539 MX35_PAD_D3_DRDY__IPU_DISPB_D3_DRDY +540 MX35_PAD_D3_DRDY__IPU_DISPB_SD_D_O +541 MX35_PAD_D3_DRDY__GPIO1_0 +542 MX35_PAD_D3_DRDY__SDMA_SDMA_DEBUG_CORE_STATUS_1 +543 MX35_PAD_D3_DRDY__ARM11P_TOP_TRACE_17 +544 MX35_PAD_CONTRAST__IPU_DISPB_CONTR +545 MX35_PAD_CONTRAST__GPIO1_1 +546 MX35_PAD_CONTRAST__SDMA_SDMA_DEBUG_CORE_STATUS_2 +547 MX35_PAD_CONTRAST__ARM11P_TOP_TRACE_18 +548 MX35_PAD_D3_VSYNC__IPU_DISPB_D3_VSYNC +549 MX35_PAD_D3_VSYNC__IPU_DISPB_CS1 +550 MX35_PAD_D3_VSYNC__GPIO1_2 +551 MX35_PAD_D3_VSYNC__SDMA_DEBUG_YIELD +552 MX35_PAD_D3_VSYNC__ARM11P_TOP_TRACE_19 +553 MX35_PAD_D3_REV__IPU_DISPB_D3_REV +554 MX35_PAD_D3_REV__IPU_DISPB_SER_RS +555 MX35_PAD_D3_REV__GPIO1_3 +556 MX35_PAD_D3_REV__SDMA_DEBUG_BUS_RWB +557 MX35_PAD_D3_REV__ARM11P_TOP_TRACE_20 +558 MX35_PAD_D3_CLS__IPU_DISPB_D3_CLS +559 MX35_PAD_D3_CLS__IPU_DISPB_CS2 +560 MX35_PAD_D3_CLS__GPIO1_4 +561 MX35_PAD_D3_CLS__SDMA_DEBUG_BUS_DEVICE_0 +562 MX35_PAD_D3_CLS__ARM11P_TOP_TRACE_21 +563 MX35_PAD_D3_SPL__IPU_DISPB_D3_SPL +564 MX35_PAD_D3_SPL__IPU_DISPB_D12_VSYNC +565 MX35_PAD_D3_SPL__GPIO1_5 +566 MX35_PAD_D3_SPL__SDMA_DEBUG_BUS_DEVICE_1 +567 MX35_PAD_D3_SPL__ARM11P_TOP_TRACE_22 +568 MX35_PAD_SD1_CMD__ESDHC1_CMD +569 MX35_PAD_SD1_CMD__MSHC_SCLK +570 MX35_PAD_SD1_CMD__IPU_DISPB_D0_VSYNC +571 MX35_PAD_SD1_CMD__USB_TOP_USBOTG_DATA_4 +572 MX35_PAD_SD1_CMD__GPIO1_6 +573 MX35_PAD_SD1_CMD__ARM11P_TOP_TRCTL +574 MX35_PAD_SD1_CLK__ESDHC1_CLK +575 MX35_PAD_SD1_CLK__MSHC_BS +576 MX35_PAD_SD1_CLK__IPU_DISPB_BCLK +577 MX35_PAD_SD1_CLK__USB_TOP_USBOTG_DATA_5 +578 MX35_PAD_SD1_CLK__GPIO1_7 +579 MX35_PAD_SD1_CLK__ARM11P_TOP_TRCLK +580 MX35_PAD_SD1_DATA0__ESDHC1_DAT0 +581 MX35_PAD_SD1_DATA0__MSHC_DATA_0 +582 MX35_PAD_SD1_DATA0__IPU_DISPB_CS0 +583 MX35_PAD_SD1_DATA0__USB_TOP_USBOTG_DATA_6 +584 MX35_PAD_SD1_DATA0__GPIO1_8 +585 MX35_PAD_SD1_DATA0__ARM11P_TOP_TRACE_23 +586 MX35_PAD_SD1_DATA1__ESDHC1_DAT1 +587 MX35_PAD_SD1_DATA1__MSHC_DATA_1 +588 MX35_PAD_SD1_DATA1__IPU_DISPB_PAR_RS +589 MX35_PAD_SD1_DATA1__USB_TOP_USBOTG_DATA_0 +590 MX35_PAD_SD1_DATA1__GPIO1_9 +591 MX35_PAD_SD1_DATA1__ARM11P_TOP_TRACE_24 +592 MX35_PAD_SD1_DATA2__ESDHC1_DAT2 +593 MX35_PAD_SD1_DATA2__MSHC_DATA_2 +594 MX35_PAD_SD1_DATA2__IPU_DISPB_WR +595 MX35_PAD_SD1_DATA2__USB_TOP_USBOTG_DATA_1 +596 MX35_PAD_SD1_DATA2__GPIO1_10 +597 MX35_PAD_SD1_DATA2__ARM11P_TOP_TRACE_25 +598 MX35_PAD_SD1_DATA3__ESDHC1_DAT3 +599 MX35_PAD_SD1_DATA3__MSHC_DATA_3 +600 MX35_PAD_SD1_DATA3__IPU_DISPB_RD +601 MX35_PAD_SD1_DATA3__USB_TOP_USBOTG_DATA_2 +602 MX35_PAD_SD1_DATA3__GPIO1_11 +603 MX35_PAD_SD1_DATA3__ARM11P_TOP_TRACE_26 +604 MX35_PAD_SD2_CMD__ESDHC2_CMD +605 MX35_PAD_SD2_CMD__I2C3_SCL +606 MX35_PAD_SD2_CMD__ESDHC1_DAT4 +607 MX35_PAD_SD2_CMD__IPU_CSI_D_2 +608 MX35_PAD_SD2_CMD__USB_TOP_USBH2_DATA_4 +609 MX35_PAD_SD2_CMD__GPIO2_0 +610 MX35_PAD_SD2_CMD__SPDIF_SPDIF_OUT1 +611 MX35_PAD_SD2_CMD__IPU_DISPB_D12_VSYNC +612 MX35_PAD_SD2_CLK__ESDHC2_CLK +613 MX35_PAD_SD2_CLK__I2C3_SDA +614 MX35_PAD_SD2_CLK__ESDHC1_DAT5 +615 MX35_PAD_SD2_CLK__IPU_CSI_D_3 +616 MX35_PAD_SD2_CLK__USB_TOP_USBH2_DATA_5 +617 MX35_PAD_SD2_CLK__GPIO2_1 +618 MX35_PAD_SD2_CLK__SPDIF_SPDIF_IN1 +619 MX35_PAD_SD2_CLK__IPU_DISPB_CS2 +620 MX35_PAD_SD2_DATA0__ESDHC2_DAT0 +621 MX35_PAD_SD2_DATA0__UART3_RXD_MUX +622 MX35_PAD_SD2_DATA0__ESDHC1_DAT6 +623 MX35_PAD_SD2_DATA0__IPU_CSI_D_4 +624 MX35_PAD_SD2_DATA0__USB_TOP_USBH2_DATA_6 +625 MX35_PAD_SD2_DATA0__GPIO2_2 +626 MX35_PAD_SD2_DATA0__SPDIF_SPDIF_EXTCLK +627 MX35_PAD_SD2_DATA1__ESDHC2_DAT1 +628 MX35_PAD_SD2_DATA1__UART3_TXD_MUX +629 MX35_PAD_SD2_DATA1__ESDHC1_DAT7 +630 MX35_PAD_SD2_DATA1__IPU_CSI_D_5 +631 MX35_PAD_SD2_DATA1__USB_TOP_USBH2_DATA_0 +632 MX35_PAD_SD2_DATA1__GPIO2_3 +633 MX35_PAD_SD2_DATA2__ESDHC2_DAT2 +634 MX35_PAD_SD2_DATA2__UART3_RTS +635 MX35_PAD_SD2_DATA2__CAN1_RXCAN +636 MX35_PAD_SD2_DATA2__IPU_CSI_D_6 +637 MX35_PAD_SD2_DATA2__USB_TOP_USBH2_DATA_1 +638 MX35_PAD_SD2_DATA2__GPIO2_4 +639 MX35_PAD_SD2_DATA3__ESDHC2_DAT3 +640 MX35_PAD_SD2_DATA3__UART3_CTS +641 MX35_PAD_SD2_DATA3__CAN1_TXCAN +642 MX35_PAD_SD2_DATA3__IPU_CSI_D_7 +643 MX35_PAD_SD2_DATA3__USB_TOP_USBH2_DATA_2 +644 MX35_PAD_SD2_DATA3__GPIO2_5 +645 MX35_PAD_ATA_CS0__ATA_CS0 +646 MX35_PAD_ATA_CS0__CSPI1_SS3 +647 MX35_PAD_ATA_CS0__IPU_DISPB_CS1 +648 MX35_PAD_ATA_CS0__GPIO2_6 +649 MX35_PAD_ATA_CS0__IPU_DIAGB_0 +650 MX35_PAD_ATA_CS0__ARM11P_TOP_MAX1_HMASTER_0 +651 MX35_PAD_ATA_CS1__ATA_CS1 +652 MX35_PAD_ATA_CS1__IPU_DISPB_CS2 +653 MX35_PAD_ATA_CS1__CSPI2_SS0 +654 MX35_PAD_ATA_CS1__GPIO2_7 +655 MX35_PAD_ATA_CS1__IPU_DIAGB_1 +656 MX35_PAD_ATA_CS1__ARM11P_TOP_MAX1_HMASTER_1 +657 MX35_PAD_ATA_DIOR__ATA_DIOR +658 MX35_PAD_ATA_DIOR__ESDHC3_DAT0 +659 MX35_PAD_ATA_DIOR__USB_TOP_USBOTG_DIR +660 MX35_PAD_ATA_DIOR__IPU_DISPB_BE0 +661 MX35_PAD_ATA_DIOR__CSPI2_SS1 +662 MX35_PAD_ATA_DIOR__GPIO2_8 +663 MX35_PAD_ATA_DIOR__IPU_DIAGB_2 +664 MX35_PAD_ATA_DIOR__ARM11P_TOP_MAX1_HMASTER_2 +665 MX35_PAD_ATA_DIOW__ATA_DIOW +666 MX35_PAD_ATA_DIOW__ESDHC3_DAT1 +667 MX35_PAD_ATA_DIOW__USB_TOP_USBOTG_STP +668 MX35_PAD_ATA_DIOW__IPU_DISPB_BE1 +669 MX35_PAD_ATA_DIOW__CSPI2_MOSI +670 MX35_PAD_ATA_DIOW__GPIO2_9 +671 MX35_PAD_ATA_DIOW__IPU_DIAGB_3 +672 MX35_PAD_ATA_DIOW__ARM11P_TOP_MAX1_HMASTER_3 +673 MX35_PAD_ATA_DMACK__ATA_DMACK +674 MX35_PAD_ATA_DMACK__ESDHC3_DAT2 +675 MX35_PAD_ATA_DMACK__USB_TOP_USBOTG_NXT +676 MX35_PAD_ATA_DMACK__CSPI2_MISO +677 MX35_PAD_ATA_DMACK__GPIO2_10 +678 MX35_PAD_ATA_DMACK__IPU_DIAGB_4 +679 MX35_PAD_ATA_DMACK__ARM11P_TOP_MAX0_HMASTER_0 +680 MX35_PAD_ATA_RESET_B__ATA_RESET_B +681 MX35_PAD_ATA_RESET_B__ESDHC3_DAT3 +682 MX35_PAD_ATA_RESET_B__USB_TOP_USBOTG_DATA_0 +683 MX35_PAD_ATA_RESET_B__IPU_DISPB_SD_D_O +684 MX35_PAD_ATA_RESET_B__CSPI2_RDY +685 MX35_PAD_ATA_RESET_B__GPIO2_11 +686 MX35_PAD_ATA_RESET_B__IPU_DIAGB_5 +687 MX35_PAD_ATA_RESET_B__ARM11P_TOP_MAX0_HMASTER_1 +688 MX35_PAD_ATA_IORDY__ATA_IORDY +689 MX35_PAD_ATA_IORDY__ESDHC3_DAT4 +690 MX35_PAD_ATA_IORDY__USB_TOP_USBOTG_DATA_1 +691 MX35_PAD_ATA_IORDY__IPU_DISPB_SD_D_IO +692 MX35_PAD_ATA_IORDY__ESDHC2_DAT4 +693 MX35_PAD_ATA_IORDY__GPIO2_12 +694 MX35_PAD_ATA_IORDY__IPU_DIAGB_6 +695 MX35_PAD_ATA_IORDY__ARM11P_TOP_MAX0_HMASTER_2 +696 MX35_PAD_ATA_DATA0__ATA_DATA_0 +697 MX35_PAD_ATA_DATA0__ESDHC3_DAT5 +698 MX35_PAD_ATA_DATA0__USB_TOP_USBOTG_DATA_2 +699 MX35_PAD_ATA_DATA0__IPU_DISPB_D12_VSYNC +700 MX35_PAD_ATA_DATA0__ESDHC2_DAT5 +701 MX35_PAD_ATA_DATA0__GPIO2_13 +702 MX35_PAD_ATA_DATA0__IPU_DIAGB_7 +703 MX35_PAD_ATA_DATA0__ARM11P_TOP_MAX0_HMASTER_3 +704 MX35_PAD_ATA_DATA1__ATA_DATA_1 +705 MX35_PAD_ATA_DATA1__ESDHC3_DAT6 +706 MX35_PAD_ATA_DATA1__USB_TOP_USBOTG_DATA_3 +707 MX35_PAD_ATA_DATA1__IPU_DISPB_SD_CLK +708 MX35_PAD_ATA_DATA1__ESDHC2_DAT6 +709 MX35_PAD_ATA_DATA1__GPIO2_14 +710 MX35_PAD_ATA_DATA1__IPU_DIAGB_8 +711 MX35_PAD_ATA_DATA1__ARM11P_TOP_TRACE_27 +712 MX35_PAD_ATA_DATA2__ATA_DATA_2 +713 MX35_PAD_ATA_DATA2__ESDHC3_DAT7 +714 MX35_PAD_ATA_DATA2__USB_TOP_USBOTG_DATA_4 +715 MX35_PAD_ATA_DATA2__IPU_DISPB_SER_RS +716 MX35_PAD_ATA_DATA2__ESDHC2_DAT7 +717 MX35_PAD_ATA_DATA2__GPIO2_15 +718 MX35_PAD_ATA_DATA2__IPU_DIAGB_9 +719 MX35_PAD_ATA_DATA2__ARM11P_TOP_TRACE_28 +720 MX35_PAD_ATA_DATA3__ATA_DATA_3 +721 MX35_PAD_ATA_DATA3__ESDHC3_CLK +722 MX35_PAD_ATA_DATA3__USB_TOP_USBOTG_DATA_5 +723 MX35_PAD_ATA_DATA3__CSPI2_SCLK +724 MX35_PAD_ATA_DATA3__GPIO2_16 +725 MX35_PAD_ATA_DATA3__IPU_DIAGB_10 +726 MX35_PAD_ATA_DATA3__ARM11P_TOP_TRACE_29 +727 MX35_PAD_ATA_DATA4__ATA_DATA_4 +728 MX35_PAD_ATA_DATA4__ESDHC3_CMD +729 MX35_PAD_ATA_DATA4__USB_TOP_USBOTG_DATA_6 +730 MX35_PAD_ATA_DATA4__GPIO2_17 +731 MX35_PAD_ATA_DATA4__IPU_DIAGB_11 +732 MX35_PAD_ATA_DATA4__ARM11P_TOP_TRACE_30 +733 MX35_PAD_ATA_DATA5__ATA_DATA_5 +734 MX35_PAD_ATA_DATA5__USB_TOP_USBOTG_DATA_7 +735 MX35_PAD_ATA_DATA5__GPIO2_18 +736 MX35_PAD_ATA_DATA5__IPU_DIAGB_12 +737 MX35_PAD_ATA_DATA5__ARM11P_TOP_TRACE_31 +738 MX35_PAD_ATA_DATA6__ATA_DATA_6 +739 MX35_PAD_ATA_DATA6__CAN1_TXCAN +740 MX35_PAD_ATA_DATA6__UART1_DTR +741 MX35_PAD_ATA_DATA6__AUDMUX_AUD6_TXD +742 MX35_PAD_ATA_DATA6__GPIO2_19 +743 MX35_PAD_ATA_DATA6__IPU_DIAGB_13 +744 MX35_PAD_ATA_DATA7__ATA_DATA_7 +745 MX35_PAD_ATA_DATA7__CAN1_RXCAN +746 MX35_PAD_ATA_DATA7__UART1_DSR +747 MX35_PAD_ATA_DATA7__AUDMUX_AUD6_RXD +748 MX35_PAD_ATA_DATA7__GPIO2_20 +749 MX35_PAD_ATA_DATA7__IPU_DIAGB_14 +750 MX35_PAD_ATA_DATA8__ATA_DATA_8 +751 MX35_PAD_ATA_DATA8__UART3_RTS +752 MX35_PAD_ATA_DATA8__UART1_RI +753 MX35_PAD_ATA_DATA8__AUDMUX_AUD6_TXC +754 MX35_PAD_ATA_DATA8__GPIO2_21 +755 MX35_PAD_ATA_DATA8__IPU_DIAGB_15 +756 MX35_PAD_ATA_DATA9__ATA_DATA_9 +757 MX35_PAD_ATA_DATA9__UART3_CTS +758 MX35_PAD_ATA_DATA9__UART1_DCD +759 MX35_PAD_ATA_DATA9__AUDMUX_AUD6_TXFS +760 MX35_PAD_ATA_DATA9__GPIO2_22 +761 MX35_PAD_ATA_DATA9__IPU_DIAGB_16 +762 MX35_PAD_ATA_DATA10__ATA_DATA_10 +763 MX35_PAD_ATA_DATA10__UART3_RXD_MUX +764 MX35_PAD_ATA_DATA10__AUDMUX_AUD6_RXC +765 MX35_PAD_ATA_DATA10__GPIO2_23 +766 MX35_PAD_ATA_DATA10__IPU_DIAGB_17 +767 MX35_PAD_ATA_DATA11__ATA_DATA_11 +768 MX35_PAD_ATA_DATA11__UART3_TXD_MUX +769 MX35_PAD_ATA_DATA11__AUDMUX_AUD6_RXFS +770 MX35_PAD_ATA_DATA11__GPIO2_24 +771 MX35_PAD_ATA_DATA11__IPU_DIAGB_18 +772 MX35_PAD_ATA_DATA12__ATA_DATA_12 +773 MX35_PAD_ATA_DATA12__I2C3_SCL +774 MX35_PAD_ATA_DATA12__GPIO2_25 +775 MX35_PAD_ATA_DATA12__IPU_DIAGB_19 +776 MX35_PAD_ATA_DATA13__ATA_DATA_13 +777 MX35_PAD_ATA_DATA13__I2C3_SDA +778 MX35_PAD_ATA_DATA13__GPIO2_26 +779 MX35_PAD_ATA_DATA13__IPU_DIAGB_20 +780 MX35_PAD_ATA_DATA14__ATA_DATA_14 +781 MX35_PAD_ATA_DATA14__IPU_CSI_D_0 +782 MX35_PAD_ATA_DATA14__KPP_ROW_0 +783 MX35_PAD_ATA_DATA14__GPIO2_27 +784 MX35_PAD_ATA_DATA14__IPU_DIAGB_21 +785 MX35_PAD_ATA_DATA15__ATA_DATA_15 +786 MX35_PAD_ATA_DATA15__IPU_CSI_D_1 +787 MX35_PAD_ATA_DATA15__KPP_ROW_1 +788 MX35_PAD_ATA_DATA15__GPIO2_28 +789 MX35_PAD_ATA_DATA15__IPU_DIAGB_22 +790 MX35_PAD_ATA_INTRQ__ATA_INTRQ +791 MX35_PAD_ATA_INTRQ__IPU_CSI_D_2 +792 MX35_PAD_ATA_INTRQ__KPP_ROW_2 +793 MX35_PAD_ATA_INTRQ__GPIO2_29 +794 MX35_PAD_ATA_INTRQ__IPU_DIAGB_23 +795 MX35_PAD_ATA_BUFF_EN__ATA_BUFFER_EN +796 MX35_PAD_ATA_BUFF_EN__IPU_CSI_D_3 +797 MX35_PAD_ATA_BUFF_EN__KPP_ROW_3 +798 MX35_PAD_ATA_BUFF_EN__GPIO2_30 +799 MX35_PAD_ATA_BUFF_EN__IPU_DIAGB_24 +800 MX35_PAD_ATA_DMARQ__ATA_DMARQ +801 MX35_PAD_ATA_DMARQ__IPU_CSI_D_4 +802 MX35_PAD_ATA_DMARQ__KPP_COL_0 +803 MX35_PAD_ATA_DMARQ__GPIO2_31 +804 MX35_PAD_ATA_DMARQ__IPU_DIAGB_25 +805 MX35_PAD_ATA_DMARQ__ECT_CTI_TRIG_IN1_4 +806 MX35_PAD_ATA_DA0__ATA_DA_0 +807 MX35_PAD_ATA_DA0__IPU_CSI_D_5 +808 MX35_PAD_ATA_DA0__KPP_COL_1 +809 MX35_PAD_ATA_DA0__GPIO3_0 +810 MX35_PAD_ATA_DA0__IPU_DIAGB_26 +811 MX35_PAD_ATA_DA0__ECT_CTI_TRIG_IN1_5 +812 MX35_PAD_ATA_DA1__ATA_DA_1 +813 MX35_PAD_ATA_DA1__IPU_CSI_D_6 +814 MX35_PAD_ATA_DA1__KPP_COL_2 +815 MX35_PAD_ATA_DA1__GPIO3_1 +816 MX35_PAD_ATA_DA1__IPU_DIAGB_27 +817 MX35_PAD_ATA_DA1__ECT_CTI_TRIG_IN1_6 +818 MX35_PAD_ATA_DA2__ATA_DA_2 +819 MX35_PAD_ATA_DA2__IPU_CSI_D_7 +820 MX35_PAD_ATA_DA2__KPP_COL_3 +821 MX35_PAD_ATA_DA2__GPIO3_2 +822 MX35_PAD_ATA_DA2__IPU_DIAGB_28 +823 MX35_PAD_ATA_DA2__ECT_CTI_TRIG_IN1_7 +824 MX35_PAD_MLB_CLK__MLB_MLBCLK +825 MX35_PAD_MLB_CLK__GPIO3_3 +826 MX35_PAD_MLB_DAT__MLB_MLBDAT +827 MX35_PAD_MLB_DAT__GPIO3_4 +828 MX35_PAD_MLB_SIG__MLB_MLBSIG +829 MX35_PAD_MLB_SIG__GPIO3_5 +830 MX35_PAD_FEC_TX_CLK__FEC_TX_CLK +831 MX35_PAD_FEC_TX_CLK__ESDHC1_DAT4 +832 MX35_PAD_FEC_TX_CLK__UART3_RXD_MUX +833 MX35_PAD_FEC_TX_CLK__USB_TOP_USBH2_DIR +834 MX35_PAD_FEC_TX_CLK__CSPI2_MOSI +835 MX35_PAD_FEC_TX_CLK__GPIO3_6 +836 MX35_PAD_FEC_TX_CLK__IPU_DISPB_D12_VSYNC +837 MX35_PAD_FEC_TX_CLK__ARM11P_TOP_EVNTBUS_0 +838 MX35_PAD_FEC_RX_CLK__FEC_RX_CLK +839 MX35_PAD_FEC_RX_CLK__ESDHC1_DAT5 +840 MX35_PAD_FEC_RX_CLK__UART3_TXD_MUX +841 MX35_PAD_FEC_RX_CLK__USB_TOP_USBH2_STP +842 MX35_PAD_FEC_RX_CLK__CSPI2_MISO +843 MX35_PAD_FEC_RX_CLK__GPIO3_7 +844 MX35_PAD_FEC_RX_CLK__IPU_DISPB_SD_D_I +845 MX35_PAD_FEC_RX_CLK__ARM11P_TOP_EVNTBUS_1 +846 MX35_PAD_FEC_RX_DV__FEC_RX_DV +847 MX35_PAD_FEC_RX_DV__ESDHC1_DAT6 +848 MX35_PAD_FEC_RX_DV__UART3_RTS +849 MX35_PAD_FEC_RX_DV__USB_TOP_USBH2_NXT +850 MX35_PAD_FEC_RX_DV__CSPI2_SCLK +851 MX35_PAD_FEC_RX_DV__GPIO3_8 +852 MX35_PAD_FEC_RX_DV__IPU_DISPB_SD_CLK +853 MX35_PAD_FEC_RX_DV__ARM11P_TOP_EVNTBUS_2 +854 MX35_PAD_FEC_COL__FEC_COL +855 MX35_PAD_FEC_COL__ESDHC1_DAT7 +856 MX35_PAD_FEC_COL__UART3_CTS +857 MX35_PAD_FEC_COL__USB_TOP_USBH2_DATA_0 +858 MX35_PAD_FEC_COL__CSPI2_RDY +859 MX35_PAD_FEC_COL__GPIO3_9 +860 MX35_PAD_FEC_COL__IPU_DISPB_SER_RS +861 MX35_PAD_FEC_COL__ARM11P_TOP_EVNTBUS_3 +862 MX35_PAD_FEC_RDATA0__FEC_RDATA_0 +863 MX35_PAD_FEC_RDATA0__PWM_PWMO +864 MX35_PAD_FEC_RDATA0__UART3_DTR +865 MX35_PAD_FEC_RDATA0__USB_TOP_USBH2_DATA_1 +866 MX35_PAD_FEC_RDATA0__CSPI2_SS0 +867 MX35_PAD_FEC_RDATA0__GPIO3_10 +868 MX35_PAD_FEC_RDATA0__IPU_DISPB_CS1 +869 MX35_PAD_FEC_RDATA0__ARM11P_TOP_EVNTBUS_4 +870 MX35_PAD_FEC_TDATA0__FEC_TDATA_0 +871 MX35_PAD_FEC_TDATA0__SPDIF_SPDIF_OUT1 +872 MX35_PAD_FEC_TDATA0__UART3_DSR +873 MX35_PAD_FEC_TDATA0__USB_TOP_USBH2_DATA_2 +874 MX35_PAD_FEC_TDATA0__CSPI2_SS1 +875 MX35_PAD_FEC_TDATA0__GPIO3_11 +876 MX35_PAD_FEC_TDATA0__IPU_DISPB_CS0 +877 MX35_PAD_FEC_TDATA0__ARM11P_TOP_EVNTBUS_5 +878 MX35_PAD_FEC_TX_EN__FEC_TX_EN +879 MX35_PAD_FEC_TX_EN__SPDIF_SPDIF_IN1 +880 MX35_PAD_FEC_TX_EN__UART3_RI +881 MX35_PAD_FEC_TX_EN__USB_TOP_USBH2_DATA_3 +882 MX35_PAD_FEC_TX_EN__GPIO3_12 +883 MX35_PAD_FEC_TX_EN__IPU_DISPB_PAR_RS +884 MX35_PAD_FEC_TX_EN__ARM11P_TOP_EVNTBUS_6 +885 MX35_PAD_FEC_MDC__FEC_MDC +886 MX35_PAD_FEC_MDC__CAN2_TXCAN +887 MX35_PAD_FEC_MDC__UART3_DCD +888 MX35_PAD_FEC_MDC__USB_TOP_USBH2_DATA_4 +889 MX35_PAD_FEC_MDC__GPIO3_13 +890 MX35_PAD_FEC_MDC__IPU_DISPB_WR +891 MX35_PAD_FEC_MDC__ARM11P_TOP_EVNTBUS_7 +892 MX35_PAD_FEC_MDIO__FEC_MDIO +893 MX35_PAD_FEC_MDIO__CAN2_RXCAN +894 MX35_PAD_FEC_MDIO__USB_TOP_USBH2_DATA_5 +895 MX35_PAD_FEC_MDIO__GPIO3_14 +896 MX35_PAD_FEC_MDIO__IPU_DISPB_RD +897 MX35_PAD_FEC_MDIO__ARM11P_TOP_EVNTBUS_8 +898 MX35_PAD_FEC_TX_ERR__FEC_TX_ERR +899 MX35_PAD_FEC_TX_ERR__OWIRE_LINE +900 MX35_PAD_FEC_TX_ERR__SPDIF_SPDIF_EXTCLK +901 MX35_PAD_FEC_TX_ERR__USB_TOP_USBH2_DATA_6 +902 MX35_PAD_FEC_TX_ERR__GPIO3_15 +903 MX35_PAD_FEC_TX_ERR__IPU_DISPB_D0_VSYNC +904 MX35_PAD_FEC_TX_ERR__ARM11P_TOP_EVNTBUS_9 +905 MX35_PAD_FEC_RX_ERR__FEC_RX_ERR +906 MX35_PAD_FEC_RX_ERR__IPU_CSI_D_0 +907 MX35_PAD_FEC_RX_ERR__USB_TOP_USBH2_DATA_7 +908 MX35_PAD_FEC_RX_ERR__KPP_COL_4 +909 MX35_PAD_FEC_RX_ERR__GPIO3_16 +910 MX35_PAD_FEC_RX_ERR__IPU_DISPB_SD_D_IO +911 MX35_PAD_FEC_CRS__FEC_CRS +912 MX35_PAD_FEC_CRS__IPU_CSI_D_1 +913 MX35_PAD_FEC_CRS__USB_TOP_USBH2_PWR +914 MX35_PAD_FEC_CRS__KPP_COL_5 +915 MX35_PAD_FEC_CRS__GPIO3_17 +916 MX35_PAD_FEC_CRS__IPU_FLASH_STROBE +917 MX35_PAD_FEC_RDATA1__FEC_RDATA_1 +918 MX35_PAD_FEC_RDATA1__IPU_CSI_D_2 +919 MX35_PAD_FEC_RDATA1__AUDMUX_AUD6_RXC +920 MX35_PAD_FEC_RDATA1__USB_TOP_USBH2_OC +921 MX35_PAD_FEC_RDATA1__KPP_COL_6 +922 MX35_PAD_FEC_RDATA1__GPIO3_18 +923 MX35_PAD_FEC_RDATA1__IPU_DISPB_BE0 +924 MX35_PAD_FEC_TDATA1__FEC_TDATA_1 +925 MX35_PAD_FEC_TDATA1__IPU_CSI_D_3 +926 MX35_PAD_FEC_TDATA1__AUDMUX_AUD6_RXFS +927 MX35_PAD_FEC_TDATA1__KPP_COL_7 +928 MX35_PAD_FEC_TDATA1__GPIO3_19 +929 MX35_PAD_FEC_TDATA1__IPU_DISPB_BE1 +930 MX35_PAD_FEC_RDATA2__FEC_RDATA_2 +931 MX35_PAD_FEC_RDATA2__IPU_CSI_D_4 +932 MX35_PAD_FEC_RDATA2__AUDMUX_AUD6_TXD +933 MX35_PAD_FEC_RDATA2__KPP_ROW_4 +934 MX35_PAD_FEC_RDATA2__GPIO3_20 +935 MX35_PAD_FEC_TDATA2__FEC_TDATA_2 +936 MX35_PAD_FEC_TDATA2__IPU_CSI_D_5 +937 MX35_PAD_FEC_TDATA2__AUDMUX_AUD6_RXD +938 MX35_PAD_FEC_TDATA2__KPP_ROW_5 +939 MX35_PAD_FEC_TDATA2__GPIO3_21 +940 MX35_PAD_FEC_RDATA3__FEC_RDATA_3 +941 MX35_PAD_FEC_RDATA3__IPU_CSI_D_6 +942 MX35_PAD_FEC_RDATA3__AUDMUX_AUD6_TXC +943 MX35_PAD_FEC_RDATA3__KPP_ROW_6 +944 MX35_PAD_FEC_RDATA3__GPIO3_22 +945 MX35_PAD_FEC_TDATA3__FEC_TDATA_3 +946 MX35_PAD_FEC_TDATA3__IPU_CSI_D_7 +947 MX35_PAD_FEC_TDATA3__AUDMUX_AUD6_TXFS +948 MX35_PAD_FEC_TDATA3__KPP_ROW_7 +949 MX35_PAD_FEC_TDATA3__GPIO3_23 +950 MX35_PAD_EXT_ARMCLK__CCM_EXT_ARMCLK +951 MX35_PAD_TEST_MODE__TCU_TEST_MODE diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt new file mode 100644 index 0000000000000000000000000000000000000000..daa7689560695d1769bdf7d2064ff1f0181873d6 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt @@ -0,0 +1,83 @@ +Lantiq FALCON pinmux controller + +Required properties: +- compatible: "lantiq,pinctrl-falcon" +- reg: Should contain the physical address and length of the gpio/pinmux + register range + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Lantiq's pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those group(s), and two pin configuration parameters: +pull-up and open-drain + +The name of each subnode is not important as long as it is unique; all subnodes +should be enumerated and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +We support 2 types of nodes. + +Definition of mux function groups: + +Required subnode-properties: +- lantiq,groups : An array of strings. Each string contains the name of a group. + Valid values for these names are listed below. +- lantiq,function: A string containing the name of the function to mux to the + group. Valid values for function names are listed below. + +Valid values for group and function names: + + mux groups: + por, ntr, ntr8k, hrst, mdio, bootled, asc0, spi, spi cs0, spi cs1, i2c, + jtag, slic, pcm, asc1 + + functions: + rst, ntr, mdio, led, asc, spi, i2c, jtag, slic, pcm + + +Definition of pin configurations: + +Required subnode-properties: +- lantiq,pins : An array of strings. Each string contains the name of a pin. + Valid values for these names are listed below. + +Optional subnode-properties: +- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. + 0: none, 1: down +- lantiq,drive-current: Boolean, enables drive-current +- lantiq,slew-rate: Boolean, enables slew-rate + +Example: + pinmux0 { + compatible = "lantiq,pinctrl-falcon"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + asc0 { + lantiq,groups = "asc0"; + lantiq,function = "asc"; + }; + ntr { + lantiq,groups = "ntr8k"; + lantiq,function = "ntr"; + }; + i2c { + lantiq,groups = "i2c"; + lantiq,function = "i2c"; + }; + hrst { + lantiq,groups = "hrst"; + lantiq,function = "rst"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt new file mode 100644 index 0000000000000000000000000000000000000000..b5469db1d7adc2d4f2ff36adf6ed75e2802fe116 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt @@ -0,0 +1,97 @@ +Lantiq XWAY pinmux controller + +Required properties: +- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9" +- reg: Should contain the physical address and length of the gpio/pinmux + register range + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Lantiq's pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those group(s), and two pin configuration parameters: +pull-up and open-drain + +The name of each subnode is not important as long as it is unique; all subnodes +should be enumerated and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +We support 2 types of nodes. + +Definition of mux function groups: + +Required subnode-properties: +- lantiq,groups : An array of strings. Each string contains the name of a group. + Valid values for these names are listed below. +- lantiq,function: A string containing the name of the function to mux to the + group. Valid values for function names are listed below. + +Valid values for group and function names: + + mux groups: + exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, + ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3, + spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2, + gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2, + req3 + + additional mux groups (XR9 only): + mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4 + + functions: + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio + + + +Definition of pin configurations: + +Required subnode-properties: +- lantiq,pins : An array of strings. Each string contains the name of a pin. + Valid values for these names are listed below. + +Optional subnode-properties: +- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. + 0: none, 1: down, 2: up. +- lantiq,open-drain: Boolean, enables open-drain on the defined pin. + +Valid values for XWAY pin names: + Pinconf pins can be referenced via the names io0-io31. + +Valid values for XR9 pin names: + Pinconf pins can be referenced via the names io0-io55. + +Example: + gpio: pinmux@E100B10 { + compatible = "lantiq,pinctrl-xway"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + pci { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + }; + conf_out { + lantiq,pins = "io4", "io5", "io6"; /* stp */ + lantiq,open-drain; + lantiq,pull = <0>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..01ef408e205f18ce5ac3c16b44e559f01f877f08 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt @@ -0,0 +1,95 @@ +* Marvell Armada 370 SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,88f6710-pinctrl" + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +name pins functions +================================================================================ +mpp0 0 gpio, uart0(rxd) +mpp1 1 gpo, uart0(txd) +mpp2 2 gpio, i2c0(sck), uart0(txd) +mpp3 3 gpio, i2c0(sda), uart0(rxd) +mpp4 4 gpio, cpu_pd(vdd) +mpp5 5 gpo, ge0(txclko), uart1(txd), spi1(clk), audio(mclk) +mpp6 6 gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo) +mpp7 7 gpo, ge0(txd1), tdm(tdx), audio(lrclk) +mpp8 8 gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk) +mpp9 9 gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo) +mpp10 10 gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi) +mpp11 11 gpio, ge0(rxd0), uart1(rxd), sd0(cmd), spi0(cs1), + sata1(prsnt), spi1(cs1) +mpp12 12 gpio, ge0(rxd1), i2c1(sda), sd0(d0), spi1(cs0), + audio(spdifi) +mpp13 13 gpio, ge0(rxd2), i2c1(sck), sd0(d1), tdm(pclk), + audio(rmclk) +mpp14 14 gpio, ge0(rxd3), pcie(clkreq0), sd0(d2), spi1(mosi), + spi0(cs2) +mpp15 15 gpio, ge0(rxctl), pcie(clkreq1), sd0(d3), spi1(miso), + spi0(cs3) +mpp16 16 gpio, ge0(rxclk), uart1(rxd), tdm(int), audio(extclk) +mpp17 17 gpo, ge(mdc) +mpp18 18 gpio, ge(mdio) +mpp19 19 gpio, ge0(txclk), ge1(txclkout), tdm(pclk) +mpp20 20 gpo, ge0(txd4), ge1(txd0) +mpp21 21 gpo, ge0(txd5), ge1(txd1), uart1(txd) +mpp22 22 gpo, ge0(txd6), ge1(txd2), uart0(rts) +mpp23 23 gpo, ge0(txd7), ge1(txd3), spi1(mosi) +mpp24 24 gpio, ge0(col), ge1(txctl), spi1(cs0) +mpp25 25 gpio, ge0(rxerr), ge1(rxd0), uart1(rxd) +mpp26 26 gpio, ge0(crs), ge1(rxd1), spi1(miso) +mpp27 27 gpio, ge0(rxd4), ge1(rxd2), uart0(cts) +mpp28 28 gpio, ge0(rxd5), ge1(rxd3) +mpp29 29 gpio, ge0(rxd6), ge1(rxctl), i2c1(sda) +mpp30 30 gpio, ge0(rxd7), ge1(rxclk), i2c1(sck) +mpp31 31 gpio, tclk, ge0(txerr) +mpp32 32 gpio, spi0(cs0) +mpp33 33 gpio, dev(bootcs), spi0(cs0) +mpp34 34 gpo, dev(wen0), spi0(mosi) +mpp35 35 gpo, dev(oen), spi0(sck) +mpp36 36 gpo, dev(a1), spi0(miso) +mpp37 37 gpo, dev(a0), sata0(prsnt) +mpp38 38 gpio, dev(ready), uart1(cts), uart0(cts) +mpp39 39 gpo, dev(ad0), audio(spdifo) +mpp40 40 gpio, dev(ad1), uart1(rts), uart0(rts) +mpp41 41 gpio, dev(ad2), uart1(rxd) +mpp42 42 gpo, dev(ad3), uart1(txd) +mpp43 43 gpo, dev(ad4), audio(bclk) +mpp44 44 gpo, dev(ad5), audio(mclk) +mpp45 45 gpo, dev(ad6), audio(lrclk) +mpp46 46 gpo, dev(ad7), audio(sdo) +mpp47 47 gpo, dev(ad8), sd0(clk), audio(spdifo) +mpp48 48 gpio, dev(ad9), uart0(rts), sd0(cmd), sata1(prsnt), + spi0(cs1) +mpp49 49 gpio, dev(ad10), pcie(clkreq1), sd0(d0), spi1(cs0), + audio(spdifi) +mpp50 50 gpio, dev(ad11), uart0(cts), sd0(d1), spi1(miso), + audio(rmclk) +mpp51 51 gpio, dev(ad12), i2c1(sda), sd0(d2), spi1(mosi) +mpp52 52 gpio, dev(ad13), i2c1(sck), sd0(d3), spi1(sck) +mpp53 53 gpio, dev(ad14), sd0(clk), tdm(pclk), spi0(cs2), + pcie(clkreq1) +mpp54 54 gpo, dev(ad15), tdm(dtx) +mpp55 55 gpio, dev(cs1), uart1(txd), tdm(rst), sata1(prsnt), + sata0(prsnt) +mpp56 56 gpio, dev(cs2), uart1(cts), uart0(cts), spi0(cs3), + pcie(clkreq0), spi1(cs1) +mpp57 57 gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt), + audio(sdo) +mpp58 58 gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk), + uart0(rts) +mpp59 59 gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk) +mpp60 60 gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rst-out), + audio(sdi) +mpp61 61 gpo, dev(wen1), uart1(txd), audio(rclk) +mpp62 62 gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0), + audio(mclk), uart0(cts) +mpp63 63 gpo, spi0(sck), tclk +mpp64 64 gpio, spi0(miso), spi0-1(cs1) +mpp65 65 gpio, spi0(mosi), spi0-1(cs2) diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..bfa0a2e5e0cb929d91f666537fe45a99199005d0 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt @@ -0,0 +1,100 @@ +* Marvell Armada XP SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,mv78230-pinctrl", "marvell,mv78260-pinctrl", + "marvell,mv78460-pinctrl" + +This driver supports all Armada XP variants, i.e. mv78230, mv78260, and mv78460. + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +* Marvell Armada XP (all variants) + +name pins functions +================================================================================ +mpp0 0 gpio, ge0(txclko), lcd(d0) +mpp1 1 gpio, ge0(txd0), lcd(d1) +mpp2 2 gpio, ge0(txd1), lcd(d2) +mpp3 3 gpio, ge0(txd2), lcd(d3) +mpp4 4 gpio, ge0(txd3), lcd(d4) +mpp5 5 gpio, ge0(txctl), lcd(d5) +mpp6 6 gpio, ge0(rxd0), lcd(d6) +mpp7 7 gpio, ge0(rxd1), lcd(d7) +mpp8 8 gpio, ge0(rxd2), lcd(d8) +mpp9 9 gpio, ge0(rxd3), lcd(d9) +mpp10 10 gpio, ge0(rxctl), lcd(d10) +mpp11 11 gpio, ge0(rxclk), lcd(d11) +mpp12 12 gpio, ge0(txd4), ge1(txd0), lcd(d12) +mpp13 13 gpio, ge0(txd5), ge1(txd1), lcd(d13) +mpp14 14 gpio, ge0(txd6), ge1(txd2), lcd(d15) +mpp15 15 gpio, ge0(txd7), ge1(txd3), lcd(d16) +mpp16 16 gpio, ge0(txd7), ge1(txd3), lcd(d16) +mpp17 17 gpio, ge0(col), ge1(txctl), lcd(d17) +mpp18 18 gpio, ge0(rxerr), ge1(rxd0), lcd(d18), ptp(trig) +mpp19 19 gpio, ge0(crs), ge1(rxd1), lcd(d19), ptp(evreq) +mpp20 20 gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk) +mpp21 21 gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat) +mpp22 22 gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt) +mpp23 23 gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt) +mpp24 24 gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst) +mpp25 25 gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk) +mpp26 26 gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd) +mpp27 27 gpio, lcd(e), tdm(dtx), ptp(trig) +mpp28 28 gpio, lcd(pwm), tdm(drx), ptp(evreq) +mpp29 29 gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd) +mpp30 30 gpio, tdm(int1), sd0(clk) +mpp31 31 gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd) +mpp32 32 gpio, tdm(int3), sd0(d0), vdd(cpu1-pd) +mpp33 33 gpio, tdm(int4), sd0(d1), mem(bat) +mpp34 34 gpio, tdm(int5), sd0(d2), sata0(prsnt) +mpp35 35 gpio, tdm(int6), sd0(d3), sata1(prsnt) +mpp36 36 gpio, spi(mosi) +mpp37 37 gpio, spi(miso) +mpp38 38 gpio, spi(sck) +mpp39 39 gpio, spi(cs0) +mpp40 40 gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd), + pcie(clkreq0) +mpp41 41 gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt), + pcie(clkreq1) +mpp42 42 gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer), + vdd(cpu0-pd) +mpp43 43 gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout), + vdd(cpu2-3-pd){1} +mpp44 44 gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2), + mem(bat) +mpp45 45 gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt) +mpp46 46 gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt) +mpp47 47 gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3), + ref(clkout) +mpp48 48 gpio, tclk, dev(burst/last) + +* Marvell Armada XP (mv78260 and mv78460 only) + +name pins functions +================================================================================ +mpp49 49 gpio, dev(we3) +mpp50 50 gpio, dev(we2) +mpp51 51 gpio, dev(ad16) +mpp52 52 gpio, dev(ad17) +mpp53 53 gpio, dev(ad18) +mpp54 54 gpio, dev(ad19) +mpp55 55 gpio, dev(ad20), vdd(cpu0-pd) +mpp56 56 gpio, dev(ad21), vdd(cpu1-pd) +mpp57 57 gpio, dev(ad22), vdd(cpu2-3-pd){1} +mpp58 58 gpio, dev(ad23) +mpp59 59 gpio, dev(ad24) +mpp60 60 gpio, dev(ad25) +mpp61 61 gpio, dev(ad26) +mpp62 62 gpio, dev(ad27) +mpp63 63 gpio, dev(ad28) +mpp64 64 gpio, dev(ad29) +mpp65 65 gpio, dev(ad30) +mpp66 66 gpio, dev(ad31) + +Notes: +* {1} vdd(cpu2-3-pd) only available on mv78460. diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..a648aaad61102e7b58feb6a0a98085b1493befa5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt @@ -0,0 +1,72 @@ +* Marvell Dove SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,dove-pinctrl" +- clocks: (optional) phandle of pdma clock + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +name pins functions +================================================================================ +mpp0 0 gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm) +mpp1 1 gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm) +mpp2 2 gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt), + uart1(rts) +mpp3 3 gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act), + uart1(cts), lcd-spi(cs1) +mpp4 4 gpio, pmu, uart3(rts), sdio1(cd), spi1(miso) +mpp5 5 gpio, pmu, uart3(cts), sdio1(wp), spi1(cs) +mpp6 6 gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi) +mpp7 7 gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck) +mpp8 8 gpio, pmu, watchdog(rstout) +mpp9 9 gpio, pmu, pex1(clkreq) +mpp10 10 gpio, pmu, ssp(sclk) +mpp11 11 gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl), + sdio1(ledctrl), pex0(clkreq) +mpp12 12 gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd), sata(act) +mpp13 13 gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp), + ssp(extclk) +mpp14 14 gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd) +mpp15 15 gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm) +mpp16 16 gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1) +mpp17 17 gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda), + ac97-1(sysclko) +mpp18 18 gpio, uart3(txd), sdio0(buspwr), ac97(sdi3), lcd0(pwm) +mpp19 19 gpio, uart3(rxd), sdio0(ledctrl), twsi(sck) +mpp20 20 gpio, sdio0(cd), sdio1(cd), spi1(miso), lcd-spi(miso), + ac97(sysclko) +mpp21 21 gpio, sdio0(wp), sdio1(wp), spi1(cs), lcd-spi(cs0), + uart1(cts), ssp(sfrm) +mpp22 22 gpio, sdio0(buspwr), sdio1(buspwr), spi1(mosi), + lcd-spi(mosi), uart1(cts), ssp(txd) +mpp23 23 gpio, sdio0(ledctrl), sdio1(ledctrl), spi1(sck), + lcd-spi(sck), ssp(sclk) +mpp_camera 24-39 gpio, camera +mpp_sdio0 40-45 gpio, sdio0 +mpp_sdio1 46-51 gpio, sdio1 +mpp_audio1 52-57 gpio, i2s1/spdifo, i2s1, spdifo, twsi, ssp/spdifo, ssp, + ssp/twsi +mpp_spi0 58-61 gpio, spi0 +mpp_uart1 62-63 gpio, uart1 +mpp_nand 64-71 gpo, nand +audio0 - i2s, ac97 +twsi - none, opt1, opt2, opt3 + +Notes: +* group "mpp_audio1" allows the following functions and gpio pins: + - gpio : gpio on pins 52-57 + - i2s1/spdifo : audio1 i2s on pins 52-55 and spdifo on 57, no gpios + - i2s1 : audio1 i2s on pins 52-55, gpio on pins 56,57 + - spdifo : spdifo on pin 57, gpio on pins 52-55 + - twsi : twsi on pins 56,57, gpio on pins 52-55 + - ssp/spdifo : ssp on pins 52-55, spdifo on pin 57, no gpios + - ssp : ssp on pins 52-55, gpio on pins 56,57 + - ssp/twsi : ssp on pins 52-55, twsi on pins 56,57, no gpios +* group "audio0" internally muxes i2s0 or ac97 controller to the dedicated + audio0 pins. +* group "twsi" internally muxes twsi controller to the dedicated or option pins. diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..361bccb7ec89bad6f23eca65a44a98466fa712ea --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt @@ -0,0 +1,279 @@ +* Marvell Kirkwood SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,88f6180-pinctrl", + "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl", + "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl" + +This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x. + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +* Marvell Kirkwood 88f6180 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig) +mpp12 12 gpo, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs) +mpp17 17 gpio, sdio(d3) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, mii(rxerr) +mpp21 21 gpio, audio(spdifi) +mpp22 22 gpio, audio(spdifo) +mpp23 23 gpio, audio(rmclk) +mpp24 24 gpio, audio(bclk) +mpp25 25 gpio, audio(sdo) +mpp26 26 gpio, audio(lrclk) +mpp27 27 gpio, audio(mclk) +mpp28 28 gpio, audio(sdi) +mpp29 29 gpio, audio(extclk) + +* Marvell Kirkwood 88f6190 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col), mii-1(rxerr) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs), sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig), sata0(act) +mpp12 12 gpo, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs) +mpp17 17 gpio, sdio(d3), sata0(prsnt) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0) +mpp21 21 gpio, ge1(txd1), sata0(act) +mpp22 22 gpio, ge1(txd2) +mpp23 23 gpio, ge1(txd3), sata0(prsnt) +mpp24 24 gpio, ge1(rxd0) +mpp25 25 gpio, ge1(rxd1) +mpp26 26 gpio, ge1(rxd2) +mpp27 27 gpio, ge1(rxd3) +mpp28 28 gpio, ge1(col) +mpp29 29 gpio, ge1(txclk) +mpp30 30 gpio, ge1(rxclk) +mpp31 31 gpio, ge1(rxclk) +mpp32 32 gpio, ge1(txclko) +mpp33 33 gpo, ge1(txclk) +mpp34 34 gpio, ge1(txen) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr) + +* Marvell Kirkwood 88f6192 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col), mii-1(rxerr), sata1(prsnt) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs), sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig), sata1(act) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig), sata0(act) +mpp12 12 gpo, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs), + sata1(act) +mpp17 17 gpio, sdio(d3), sata0(prsnt) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi), + sata1(act) +mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql), + audio(spdifo) +mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk), + sata1(prsnt) +mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql), + audio(bclk) +mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo) +mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk) +mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk) +mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi) +mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk) +mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst) +mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk) +mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs) +mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx) +mpp33 33 gpo, ge1(txclk), tdm(drx) +mpp34 34 gpio, ge1(txen), tdm(spi-cs1) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql) + +* Marvell Kirkwood 88f6281 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col), mii-1(rxerr), sata1(prsnt) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs), sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig), sata1(act) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig), sata0(act) +mpp12 12 gpio, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs), + sata1(act) +mpp17 17 gpio, sdio(d3), sata0(prsnt) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi), + sata1(act) +mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql), + audio(spdifo) +mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk), + sata1(prsnt) +mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql), + audio(bclk) +mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo) +mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk) +mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk) +mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi) +mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk) +mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst) +mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk) +mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs) +mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx) +mpp33 33 gpo, ge1(txclk), tdm(drx) +mpp34 34 gpio, ge1(txen), tdm(spi-cs1), sata1(act) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql) +mpp36 36 gpio, ts(mp0), tdm(spi-cs1), audio(spdifi) +mpp37 37 gpio, ts(mp1), tdm(tx2ql), audio(spdifo) +mpp38 38 gpio, ts(mp2), tdm(rx2ql), audio(rmclk) +mpp39 39 gpio, ts(mp3), tdm(spi-cs0), audio(bclk) +mpp40 40 gpio, ts(mp4), tdm(spi-sck), audio(sdo) +mpp41 41 gpio, ts(mp5), tdm(spi-miso), audio(lrclk) +mpp42 42 gpio, ts(mp6), tdm(spi-mosi), audio(mclk) +mpp43 43 gpio, ts(mp7), tdm(int), audio(sdi) +mpp44 44 gpio, ts(mp8), tdm(rst), audio(extclk) +mpp45 45 gpio, ts(mp9), tdm(pclk) +mpp46 46 gpio, ts(mp10), tdm(fs) +mpp47 47 gpio, ts(mp11), tdm(drx) +mpp48 48 gpio, ts(mp12), tdm(dtx) +mpp49 49 gpio, ts(mp9), tdm(rx0ql), ptp(clk) + +* Marvell Kirkwood 88f6282 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), sata1(act), lcd(hsync) +mpp5 5 gpo, nand(io7), uart0(txd), sata0(act), lcd(vsync) +mpp6 6 sysrst(out), spi(mosi) +mpp7 7 gpo, spi(cs), lcd(pwm) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), mii(col), + mii-1(rxerr), sata1(prsnt) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), mii(crs), + sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), sata1(act) +mpp11 11 gpio, spi(miso), uart0(rxd), sata0(act) +mpp12 12 gpo, sdio(clk), audio(spdifo), spi(mosi), twsi(sda) +mpp13 13 gpio, sdio(cmd), uart1(txd), audio(rmclk), lcd(pwm) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt), + audio(spdifi), audio-1(sdi) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act), + spi(cs) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs), + sata1(act), lcd(extclk) +mpp17 17 gpio, sdio(d3), sata0(prsnt), sata1(act), twsi1(sck) +mpp18 18 gpo, nand(io0), pex(clkreq) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi), + sata1(act), lcd(d0) +mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql), + audio(spdifo), lcd(d1) +mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk), + sata1(prsnt), lcd(d2) +mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql), + audio(bclk), lcd(d3) +mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo), + lcd(d4) +mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk), + lcd(d5) +mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk), + lcd(d6) +mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi), + lcd(d7) +mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk), + lcd(d8) +mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst), lcd(d9) +mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk), lcd(d10) +mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs), lcd(d11) +mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx), lcd(d12) +mpp33 33 gpo, ge1(txclk), tdm(drx), lcd(d13) +mpp34 34 gpio, ge1(txen), tdm(spi-cs1), sata1(act), lcd(d14) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql), + lcd(d15) +mpp36 36 gpio, ts(mp0), tdm(spi-cs1), audio(spdifi), twsi1(sda) +mpp37 37 gpio, ts(mp1), tdm(tx2ql), audio(spdifo), twsi1(sck) +mpp38 38 gpio, ts(mp2), tdm(rx2ql), audio(rmclk), lcd(d18) +mpp39 39 gpio, ts(mp3), tdm(spi-cs0), audio(bclk), lcd(d19) +mpp40 40 gpio, ts(mp4), tdm(spi-sck), audio(sdo), lcd(d20) +mpp41 41 gpio, ts(mp5), tdm(spi-miso), audio(lrclk), lcd(d21) +mpp42 42 gpio, ts(mp6), tdm(spi-mosi), audio(mclk), lcd(d22) +mpp43 43 gpio, ts(mp7), tdm(int), audio(sdi), lcd(d23) +mpp44 44 gpio, ts(mp8), tdm(rst), audio(extclk), lcd(clk) +mpp45 45 gpio, ts(mp9), tdm(pclk), lcd(e) +mpp46 46 gpio, ts(mp10), tdm(fs), lcd(hsync) +mpp47 47 gpio, ts(mp11), tdm(drx), lcd(vsync) +mpp48 48 gpio, ts(mp12), tdm(dtx), lcd(d16) +mpp49 49 gpo, tdm(rx0ql), pex(clkreq), lcd(d17) diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..0a26c3aa4e6d0ccc20ad78c981f52fb4733e14aa --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt @@ -0,0 +1,46 @@ +* Marvell SoC pinctrl core driver for mpp + +The pinctrl driver enables Marvell SoCs to configure the multi-purpose pins +(mpp) to a specific function. For each SoC family there is a SoC specific +driver using this core driver. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +A Marvell SoC pin configuration node is a node of a group of pins which can +be used for a specific device or function. Each node requires one or more +mpp pins or group of pins and a mpp function common to all pins. + +Required properties for pinctrl driver: +- compatible: "marvell,-pinctrl" + Please refer to each marvell,-pinctrl.txt binding doc for supported SoCs. + +Required properties for pin configuration node: +- marvell,pins: string array of mpp pins or group of pins to be muxed. +- marvell,function: string representing a function to mux to for all + marvell,pins given in this pin configuration node. The function has to be + common for all marvell,pins. Please refer to marvell,-pinctrl.txt for + valid pin/pin group names and available function names for each SoC. + +Examples: + +uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <7>; + + pinctrl-0 = <&pmx_uart1_sw>; + pinctrl-names = "default"; +}; + +pinctrl: pinctrl@d0200 { + compatible = "marvell,dove-pinctrl"; + reg = <0xd0200 0x20>; + + pmx_uart1_sw: pmx-uart1-sw { + marvell,pins = "mpp_uart1"; + marvell,function = "uart1"; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt index 5187f0dd8b2864c7bc95282b1250688f36500e5a..2c81e45f1374ccd7b5b79c1bb2872639c4d04652 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt @@ -14,10 +14,12 @@ Optional properties: - pinctrl-single,function-off : function off mode for disabled state if available and same for all registers; if not specified, disabling of pin functions is ignored +- pinctrl-single,bit-per-mux : boolean to indicate that one register controls + more than one pin -This driver assumes that there is only one register for each pin, -and uses the common pinctrl bindings as specified in the pinctrl-bindings.txt -document in this directory. +This driver assumes that there is only one register for each pin (unless the +pinctrl-single,bit-per-mux is set), and uses the common pinctrl bindings as +specified in the pinctrl-bindings.txt document in this directory. The pin configuration nodes for pinctrl-single are specified as pinctrl register offset and value pairs using pinctrl-single,pins. Only the bits @@ -31,6 +33,15 @@ device pinctrl register, and 0x118 contains the desired value of the pinctrl register. See the device example and static board pins example below for more information. +In case when one register changes more than one pin's mux the +pinctrl-single,bits need to be used which takes three parameters: + + pinctrl-single,bits = <0xdc 0x18, 0xff>; + +Where 0xdc is the offset from the pinctrl register base address for the +device pinctrl register, 0x18 is the desired value, and 0xff is the sub mask to +be used when applying this change to the register. + Example: /* SoC common file */ @@ -55,6 +66,15 @@ pmx_wkup: pinmux@4a31e040 { pinctrl-single,function-mask = <0xffff>; }; +control_devconf0: pinmux@48002274 { + compatible = "pinctrl-single"; + reg = <0x48002274 4>; /* Single register */ + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,bit-per-mux; + pinctrl-single,register-width = <32>; + pinctrl-single,function-mask = <0x5F>; +}; /* board specific .dts file */ @@ -87,6 +107,21 @@ pmx_wkup: pinmux@4a31e040 { }; }; +&control_devconf0 { + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,bits = < + 0x00 0x18 0x18 /* FSR/CLKR signal from FSX/CLKX pin */ + >; + }; + + mcbsp2_clks_pins: pinmux_mcbsp2_clks_pins { + pinctrl-single,bits = < + 0x00 0x40 0x40 /* McBSP2 CLKS from McBSP_CLKS pin */ + >; + }; + +}; + &uart2 { pinctrl-names = "default"; pinctrl-0 = <&uart2_pins>; diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..03dee50532f5c3d5f94f49fb2ee0bf44232d8fa3 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -0,0 +1,196 @@ +Samsung GPIO and Pin Mux/Config controller + +Samsung's ARM based SoC's integrates a GPIO and Pin mux/config hardware +controller. It controls the input/output settings on the available pads/pins +and also provides ability to multiplex and configure the output of various +on-chip controllers onto these pads. + +Required Properties: +- compatible: should be one of the following. + - "samsung,pinctrl-exynos4210": for Exynos4210 compatible pin-controller. + - "samsung,pinctrl-exynos5250": for Exynos5250 compatible pin-controller. + +- reg: Base address of the pin controller hardware module and length of + the address space it occupies. + +- interrupts: interrupt specifier for the controller. The format and value of + the interrupt specifier depends on the interrupt parent for the controller. + +- Pin mux/config groups as child nodes: The pin mux (selecting pin function + mode) and pin config (pull up/down, driver strength) settings are represented + as child nodes of the pin-controller node. There should be atleast one + child node and there is no limit on the count of these child nodes. + + The child node should contain a list of pin(s) on which a particular pin + function selection or pin configuration (or both) have to applied. This + list of pins is specified using the property name "samsung,pins". There + should be atleast one pin specfied for this property and there is no upper + limit on the count of pins that can be specified. The pins are specified + using pin names which are derived from the hardware manual of the SoC. As + an example, the pins in GPA0 bank of the pin controller can be represented + as "gpa0-0", "gpa0-1", "gpa0-2" and so on. The names should be in lower case. + The format of the pin names should be (as per the hardware manual) + "[pin bank name]-[pin number within the bank]". + + The pin function selection that should be applied on the pins listed in the + child node is specified using the "samsung,pin-function" property. The value + of this property that should be applied to each of the pins listed in the + "samsung,pins" property should be picked from the hardware manual of the SoC + for the specified pin group. This property is optional in the child node if + no specific function selection is desired for the pins listed in the child + node. The value of this property is used as-is to program the pin-controller + function selector register of the pin-bank. + + The child node can also optionally specify one or more of the pin + configuration that should be applied on all the pins listed in the + "samsung,pins" property of the child node. The following pin configuration + properties are supported. + + - samsung,pin-pud: Pull up/down configuration. + - samsung,pin-drv: Drive strength configuration. + - samsung,pin-pud-pdn: Pull up/down configuration in power down mode. + - samsung,pin-drv-pdn: Drive strength configuration in power down mode. + + The values specified by these config properties should be derived from the + hardware manual and these values are programmed as-is into the pin + pull up/down and driver strength register of the pin-controller. + + Note: A child should include atleast a pin function selection property or + pin configuration property (one or more) or both. + + The client nodes that require a particular pin function selection and/or + pin configuration should use the bindings listed in the "pinctrl-bindings.txt" + file. + +External GPIO and Wakeup Interrupts: + +The controller supports two types of external interrupts over gpio. The first +is the external gpio interrupt and second is the external wakeup interrupts. +The difference between the two is that the external wakeup interrupts can be +used as system wakeup events. + +A. External GPIO Interrupts: For supporting external gpio interrupts, the + following properties should be specified in the pin-controller device node. + +- interrupt-controller: identifies the controller node as interrupt-parent. +- #interrupt-cells: the value of this property should be 2. + - First Cell: represents the external gpio interrupt number local to the + external gpio interrupt space of the controller. + - Second Cell: flags to identify the type of the interrupt + - 1 = rising edge triggered + - 2 = falling edge triggered + - 3 = rising and falling edge triggered + - 4 = high level triggered + - 8 = low level triggered + +B. External Wakeup Interrupts: For supporting external wakeup interrupts, a + child node representing the external wakeup interrupt controller should be + included in the pin-controller device node. This child node should include + the following properties. + + - compatible: identifies the type of the external wakeup interrupt controller + The possible values are: + - samsung,exynos4210-wakeup-eint: represents wakeup interrupt controller + found on Samsung Exynos4210 SoC. + - interrupt-parent: phandle of the interrupt parent to which the external + wakeup interrupts are forwarded to. + - interrupt-controller: identifies the node as interrupt-parent. + - #interrupt-cells: the value of this property should be 2 + - First Cell: represents the external wakeup interrupt number local to + the external wakeup interrupt space of the controller. + - Second Cell: flags to identify the type of the interrupt + - 1 = rising edge triggered + - 2 = falling edge triggered + - 3 = rising and falling edge triggered + - 4 = high level triggered + - 8 = low level triggered + +Aliases: + +All the pin controller nodes should be represented in the aliases node using +the following format 'pinctrl{n}' where n is a unique number for the alias. + +Example 1: A pin-controller node with pin groups. + + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,pinctrl-exynos4210"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + }; + +Example 2: A pin-controller node with external wakeup interrupt controller node. + + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,pinctrl-exynos4210"; + reg = <0x11000000 0x1000>; + interrupts = <0 46 0>; + interrupt-controller; + #interrupt-cells = <2>; + + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>, + <0 32 0>; + }; + }; + +Example 3: A uart client node that supports 'default' and 'flow-control' states. + + uart@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 52 0>; + pinctrl-names = "default", "flow-control; + pinctrl-0 = <&uart0_data>; + pinctrl-1 = <&uart0_data &uart0_fctl>; + }; + +Example 4: Set up the default pin state for uart controller. + + static int s3c24xx_serial_probe(struct platform_device *pdev) { + struct pinctrl *pinctrl; + ... + ... + pinctrl = devm_pinctrl_get_select_default(&pdev->dev); + } diff --git a/Documentation/devicetree/bindings/power/opp.txt b/Documentation/devicetree/bindings/power/opp.txt new file mode 100644 index 0000000000000000000000000000000000000000..74499e5033fc16dc12afd80c090481b31a25d687 --- /dev/null +++ b/Documentation/devicetree/bindings/power/opp.txt @@ -0,0 +1,25 @@ +* Generic OPP Interface + +SoCs have a standard set of tuples consisting of frequency and +voltage pairs that the device will support per voltage domain. These +are called Operating Performance Points or OPPs. + +Properties: +- operating-points: An array of 2-tuples items, and each item consists + of frequency and voltage like . + freq: clock frequency in kHz + vol: voltage in microvolt + +Examples: + +cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; +}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt b/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt index 939a26d541f64251252a652c04270e82c96b377b..d5e370450ac0b265540f092a6e3dd9c6315c6c74 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt @@ -12,9 +12,12 @@ Properties: - #size-cells : Either one or two, depending on how large each chipselect can be. - reg : Offset and length of the register set for the device -- interrupts : IFC has two interrupts. The first one is the "common" - interrupt(CM_EVTER_STAT), and second is the NAND interrupt - (NAND_EVTER_STAT). +- interrupts: IFC may have one or two interrupts. If two interrupt + specifiers are present, the first is the "common" + interrupt (CM_EVTER_STAT), and the second is the NAND + interrupt (NAND_EVTER_STAT). If there is only one, + that interrupt reports both types of event. + - ranges : Each range corresponds to a single chipselect, and covers the entire access window as configured. diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt index b16f4a57d1116756b750a9f5523e1b1c19352ba2..11963e4d6bc478a6e70e20aa1f06a32a759dee90 100644 --- a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt @@ -11,7 +11,7 @@ Example: pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <8>; }; diff --git a/Documentation/devicetree/bindings/regulator/88pm860x.txt b/Documentation/devicetree/bindings/regulator/88pm860x.txt new file mode 100644 index 0000000000000000000000000000000000000000..1267b3e1a2cca17436442f277b850ab4635fa1eb --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/88pm860x.txt @@ -0,0 +1,30 @@ +Marvell 88PM860x regulator + +Required properties: +- compatible: "marvell,88pm860x" +- reg: I2C slave address +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the regulator-compatible + property, with valid values listed below. + +Example: + + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt new file mode 100644 index 0000000000000000000000000000000000000000..371eccd1cd6897b0395e53ad6a717b964722ba34 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8907.txt @@ -0,0 +1,69 @@ +MAX8907 regulator + +Required properties: +- compatible: "maxim,max8907" +- reg: I2C slave address +- interrupts: The interrupt output of the controller +- mbatt-supply: The input supply for MBATT, BBAT, SDBY, VRTC. +- in-v1-supply: The input supply for SD1. +- in-v2-supply: The input supply for SD2. +- in-v3-supply: The input supply for SD3. +- in1-supply: The input supply for LDO1. +... +- in20-supply: The input supply for LDO20. +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. + +Optional properties: +- maxim,system-power-controller: Boolean property indicating that the PMIC + controls the overall system power. + +The valid names for regulators are: + + sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10, + ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v, + out33v, bbat, sdby, vrtc. + +Example: + + max8907@3c { + compatible = "maxim,max8907"; + reg = <0x3c>; + interrupts = <0 86 0x4>; + + maxim,system-power-controller; + + mbatt-supply = <&some_reg>; + in-v1-supply = <&mbatt_reg>; + ... + in1-supply = <&mbatt_reg>; + ... + + regulators { + mbatt_reg: mbatt { + regulator-name = "vbat_pmu"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + sd1 { + regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sd2 { + regulator-name = "nvvdd_sv2,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; +... + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 66ece3f87bbc09d755973b7580944fea3cb60971..ecfc6ccd67ef7bb22be6bab6267bfa724211d5e9 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -11,10 +11,13 @@ Optional properties: - regulator-boot-on: bootloader/firmware enabled regulator - -supply: phandle to the parent supply/regulator node - regulator-ramp-delay: ramp delay for regulator(in uV/uS) + +Deprecated properties: - regulator-compatible: If a regulator chip contains multiple regulators, and if the chip's binding contains a child node that describes each regulator, then this property indicates which regulator - this child node is intended to configure. + this child node is intended to configure. If this property is missing, + the node's name will be used instead. Example: diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt index 0487e9675ba0675bbe6beaf5aa5526891c413ab1..d316fb895daf415efc67c733522be99d7b5941fe 100644 --- a/Documentation/devicetree/bindings/regulator/tps65217.txt +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt @@ -22,66 +22,49 @@ Example: compatible = "ti,tps65217"; regulators { - #address-cells = <1>; - #size-cells = <0>; - - dcdc1_reg: regulator@0 { - reg = <0>; - regulator-compatible = "dcdc1"; + dcdc1_reg: dcdc1 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1800000>; regulator-boot-on; regulator-always-on; }; - dcdc2_reg: regulator@1 { - reg = <1>; - regulator-compatible = "dcdc2"; + dcdc2_reg: dcdc2 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - dcdc3_reg: regulator@2 { - reg = <2>; - regulator-compatible = "dcdc3"; + dcdc3_reg: dcc3 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; - ldo1_reg: regulator@3 { - reg = <3>; - regulator-compatible = "ldo1"; + ldo1_reg: ldo1 { regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - ldo2_reg: regulator@4 { - reg = <4>; - regulator-compatible = "ldo2"; + ldo2_reg: ldo2 { regulator-min-microvolt = <900000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - ldo3_reg: regulator@5 { - reg = <5>; - regulator-compatible = "ldo3"; + ldo3_reg: ldo3 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; regulator-always-on; }; - ldo4_reg: regulator@6 { - reg = <6>; - regulator-compatible = "ldo4"; + ldo4_reg: ldo4 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; regulator-boot-on; diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt index d156e1b5db1233c5ffdb2c0f54e1f5bd6234da34..8b40cac24d93959740b828f8614736177028f066 100644 --- a/Documentation/devicetree/bindings/regulator/tps6586x.txt +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -6,20 +6,31 @@ Required properties: - interrupts: the interrupt outputs of the controller - #gpio-cells: number of cells to describe a GPIO - gpio-controller: mark the device as a GPIO controller -- regulators: list of regulators provided by this controller, must have - property "regulator-compatible" to match their hardware counterparts: - sm[0-2], ldo[0-9] and ldo_rtc -- sm0-supply: The input supply for the SM0. -- sm1-supply: The input supply for the SM1. -- sm2-supply: The input supply for the SM2. +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. + sys, sm[0-2], ldo[0-9] and ldo_rtc +- sys-supply: The input supply for SYS. +- vin-sm0-supply: The input supply for the SM0. +- vin-sm1-supply: The input supply for the SM1. +- vin-sm2-supply: The input supply for the SM2. - vinldo01-supply: The input supply for the LDO1 and LDO2 - vinldo23-supply: The input supply for the LDO2 and LDO3 - vinldo4-supply: The input supply for the LDO4 - vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8 - vinldo9-supply: The input supply for the LDO9 +Optional properties: +- ti,system-power-controller: Telling whether or not this pmic is controlling + the system power. + Each regulator is defined using the standard binding for regulators. +Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver + take care of making proper parent child relationship. + Example: pmu: tps6586x@34 { @@ -30,9 +41,12 @@ Example: #gpio-cells = <2>; gpio-controller; - sm0-supply = <&some_reg>; - sm1-supply = <&some_reg>; - sm2-supply = <&some_reg>; + ti,system-power-controller; + + sys-supply = <&some_reg>; + vin-sm0-supply = <&some_reg>; + vin-sm1-supply = <&some_reg>; + vin-sm2-supply = <&some_reg>; vinldo01-supply = <...>; vinldo23-supply = <...>; vinldo4-supply = <...>; @@ -40,103 +54,80 @@ Example: vinldo9-supply = <...>; regulators { - #address-cells = <1>; - #size-cells = <0>; + sys_reg: sys { + regulator-name = "vdd_sys"; + regulator-boot-on; + regulator-always-on; + }; - sm0_reg: regulator@0 { - reg = <0>; - regulator-compatible = "sm0"; + sm0_reg: sm0 { regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; - sm1_reg: regulator@1 { - reg = <1>; - regulator-compatible = "sm1"; + sm1_reg: sm1 { regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; - sm2_reg: regulator@2 { - reg = <2>; - regulator-compatible = "sm2"; + sm2_reg: sm2 { regulator-min-microvolt = <3000000>; regulator-max-microvolt = <4550000>; regulator-boot-on; regulator-always-on; }; - ldo0_reg: regulator@3 { - reg = <3>; - regulator-compatible = "ldo0"; + ldo0_reg: ldo0 { regulator-name = "PCIE CLK"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo1_reg: regulator@4 { - reg = <4>; - regulator-compatible = "ldo1"; + ldo1_reg: ldo1 { regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; }; - ldo2_reg: regulator@5 { - reg = <5>; - regulator-compatible = "ldo2"; + ldo2_reg: ldo2 { regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; }; - ldo3_reg: regulator@6 { - reg = <6>; - regulator-compatible = "ldo3"; + ldo3_reg: ldo3 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo4_reg: regulator@7 { - reg = <7>; - regulator-compatible = "ldo4"; + ldo4_reg: ldo4 { regulator-min-microvolt = <1700000>; regulator-max-microvolt = <2475000>; }; - ldo5_reg: regulator@8 { - reg = <8>; - regulator-compatible = "ldo5"; + ldo5_reg: ldo5 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo6_reg: regulator@9 { - reg = <9>; - regulator-compatible = "ldo6"; + ldo6_reg: ldo6 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo7_reg: regulator@10 { - reg = <10>; - regulator-compatible = "ldo7"; + ldo7_reg: ldo7 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo8_reg: regulator@11 { - reg = <11>; - regulator-compatible = "ldo8"; + ldo8_reg: ldo8 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo9_reg: regulator@12 { - reg = <12>; - regulator-compatible = "ldo9"; + ldo9_reg: ldo9 { regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; diff --git a/Documentation/devicetree/bindings/rtc/pxa-rtc.txt b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt new file mode 100644 index 0000000000000000000000000000000000000000..8c6672a1b7d7df5affc04816265e39cf08f61284 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/pxa-rtc.txt @@ -0,0 +1,14 @@ +* PXA RTC + +PXA specific RTC driver. + +Required properties: +- compatible : Should be "marvell,pxa-rtc" + +Examples: + +rtc@40900000 { + compatible = "marvell,pxa-rtc"; + reg = <0x40900000 0x3c>; + interrupts = <30 31>; +}; diff --git a/Documentation/devicetree/bindings/rtc/snvs-rtc.txt b/Documentation/devicetree/bindings/rtc/snvs-rtc.txt new file mode 100644 index 0000000000000000000000000000000000000000..fb61ed77ada36b9469416affe7de6baf53f6b67f --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/snvs-rtc.txt @@ -0,0 +1 @@ +See Documentation/devicetree/bindings/crypto/fsl-sec4.txt for details. diff --git a/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt new file mode 100644 index 0000000000000000000000000000000000000000..3c0484c4958225d8bf4d9d31cbceb1671b9582e6 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/via,vt8500-rtc.txt @@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 Realtime Clock Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-rtc" +- reg : Should contain 1 register ranges(address and length) +- interrupts : alarm interrupt + +Example: + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt new file mode 100644 index 0000000000000000000000000000000000000000..c58573b5b1a466f43e3a71a788a65f545c5728ae --- /dev/null +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -0,0 +1,35 @@ +* Freescale i.MX UART controller + +Required properties: +- compatible : should be "fsl,imx21-uart" +- reg : Address and length of the register set for the device +- interrupts : Should contain UART interrupt number + +Optional properties: +- fsl,uart-has-rtscts: indicate that RTS/CTS signals are used + +Note: Each uart controller should have an alias correctly numbered +in "aliases" node. + +Example: + +- From imx51.dtsi: +aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; +}; + +uart1: serial@73fbc000 { + compatible = "fsl,imx51-uart", "fsl,imx21-uart"; + reg = <0x73fbc000 0x4000>; + interrupts = <31>; + status = "disabled"; +} + +- From imx51-babbage.dts: +uart1: serial@73fbc000 { + fsl,uart-has-rtscts; + status = "okay"; +}; + diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt new file mode 100644 index 0000000000000000000000000000000000000000..6b222f9b8ef535b6477e6c236b4ed8ac43d2fe02 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs4270.txt @@ -0,0 +1,21 @@ +CS4270 audio CODEC + +The driver for this device currently only supports I2C. + +Required properties: + + - compatible : "cirrus,cs4270" + + - reg : the I2C address of the device for I2C + +Optional properties: + + - reset-gpio : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the codec starts. + +Example: + +codec: cs4270@48 { + compatible = "cirrus,cs4270"; + reg = <0x48>; +}; diff --git a/Documentation/devicetree/bindings/sound/cs4271.txt b/Documentation/devicetree/bindings/sound/cs4271.txt new file mode 100644 index 0000000000000000000000000000000000000000..c81b5fd5a5bc80459a1b2d626c9f20b5a86bfbe9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs4271.txt @@ -0,0 +1,36 @@ +Cirrus Logic CS4271 DT bindings + +This driver supports both the I2C and the SPI bus. + +Required properties: + + - compatible: "cirrus,cs4271" + +For required properties on SPI, please consult +Documentation/devicetree/bindings/spi/spi-bus.txt + +Required properties on I2C: + + - reg: the i2c address + + +Optional properties: + + - reset-gpio: a GPIO spec to define which pin is connected to the chip's + !RESET pin + +Examples: + + codec_i2c: cs4271@10 { + compatible = "cirrus,cs4271"; + reg = <0x10>; + reset-gpio = <&gpio 23 0>; + }; + + codec_spi: cs4271@0 { + compatible = "cirrus,cs4271"; + reg = <0x0>; + reset-gpio = <&gpio 23 0>; + spi-max-frequency = <6000000>; + }; + diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt new file mode 100644 index 0000000000000000000000000000000000000000..374e145c2ef170ceaa32055cf01836bfb3f8c3ef --- /dev/null +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt @@ -0,0 +1,45 @@ +Texas Instruments McASP controller + +Required properties: +- compatible : + "ti,dm646x-mcasp-audio" : for DM646x platforms + "ti,da830-mcasp-audio" : for both DA830 & DA850 platforms + "ti,omap2-mcasp-audio" : for OMAP2 platforms (TI81xx, AM33xx) + +- reg : Should contain McASP registers offset and length +- interrupts : Interrupt number for McASP +- op-mode : I2S/DIT ops mode. +- tdm-slots : Slots for TDM operation. +- num-serializer : Serializers used by McASP. +- serial-dir : A list of serializer pin mode. The list number should be equal + to "num-serializer" parameter. Each entry is a number indication + serializer pin direction. (0 - INACTIVE, 1 - TX, 2 - RX) + + +Optional properties: + +- ti,hwmods : Must be "mcasp", n is controller instance starting 0 +- tx-num-evt : FIFO levels. +- rx-num-evt : FIFO levels. +- sram-size-playback : size of sram to be allocated during playback +- sram-size-capture : size of sram to be allocated during capture + +Example: + +mcasp0: mcasp0@1d00000 { + compatible = "ti,da830-mcasp-audio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x100000 0x3000>; + interrupts = <82 83>; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < + 0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 0 0 + 0 0 0 1 + 2 0 0 0 >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt new file mode 100644 index 0000000000000000000000000000000000000000..65dec876cb2d792813abc050833950ef48b53a66 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt @@ -0,0 +1,91 @@ +* Texas Instruments OMAP4+ and twl6040 based audio setups + +Required properties: +- compatible: "ti,abe-twl6040" +- ti,model: Name of the sound card ( for example "SDP4430") +- ti,mclk-freq: MCLK frequency for HPPLL operation +- ti,mcpdm: phandle for the McPDM node +- ti,twl6040: phandle for the twl6040 core node +- ti,audio-routing: List of connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. + +Optional properties: +- ti,dmic: phandle for the OMAP dmic node if the machine have it connected +- ti,jack_detection: Need to be set to <1> if the board capable to detect jack + insertion, removal. + +Available audio endpoints for the audio-routing table: + +Board connectors: + * Headset Stereophone + * Earphone Spk + * Ext Spk + * Line Out + * Vibrator + * Headset Mic + * Main Handset Mic + * Sub Handset Mic + * Line In + * Digital Mic + +twl6040 pins: + * HSOL + * HSOR + * EP + * HFL + * HFR + * AUXL + * AUXR + * VIBRAL + * VIBRAR + * HSMIC + * MAINMIC + * SUBMIC + * AFML + * AFMR + + * Headset Mic Bias + * Main Mic Bias + * Digital Mic1 Bias + * Digital Mic2 Bias + +Digital mic pins: + * DMic + +Example: + +sound { + compatible = "ti,abe-twl6040"; + ti,model = "SDP4430"; + + ti,jack-detection = <1>; + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + ti,dmic = <&dmic>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Earphone Spk", "EP", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "Vibrator", "VIBRAL", + "Vibrator", "VIBRAR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "MAINMIC", "Main Handset Mic", + "Main Handset Mic", "Main Mic Bias", + "SUBMIC", "Sub Handset Mic", + "Sub Handset Mic", "Main Mic Bias", + "AFML", "Line In", + "AFMR", "Line In", + "DMic", "Digital Mic", + "Digital Mic", "Digital Mic1 Bias"; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-mcbsp.txt b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt new file mode 100644 index 0000000000000000000000000000000000000000..17cce44904564b0bf2d24cb8c77774292e203bed --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt @@ -0,0 +1,37 @@ +* Texas Instruments OMAP2+ McBSP module + +Required properties: +- compatible: "ti,omap2420-mcbsp" for McBSP on OMAP2420 + "ti,omap2430-mcbsp" for McBSP on OMAP2430 + "ti,omap3-mcbsp" for McBSP on OMAP3 + "ti,omap4-mcbsp" for McBSP on OMAP4 and newer SoC +- reg: Register location and size, for OMAP4+ as an array: + , + ; +- reg-names: Array of strings associated with the address space +- interrupts: Interrupt numbers for the McBSP port, as an array in case the + McBSP IP have more interrupt lines: + , + , + ; +- interrupt-names: Array of strings associated with the interrupt numbers +- interrupt-parent: The parent interrupt controller +- ti,buffer-size: Size of the FIFO on the port (OMAP2430 and newer SoC) +- ti,hwmods: Name of the hwmod associated to the McBSP port + +Example: + +mcbsp2: mcbsp@49022000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49022000 0xff>, + <0x49028000 0xff>; + reg-names = "mpu", "sidetone"; + interrupts = <0 17 0x4>, /* OCP compliant interrupt */ + <0 62 0x4>, /* TX interrupt */ + <0 63 0x4>, /* RX interrupt */ + <0 4 0x4>; /* Sidetone */ + interrupt-names = "common", "tx", "rx", "sidetone"; + interrupt-parent = <&intc>; + ti,buffer-size = <1280>; + ti,hwmods = "mcbsp2"; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-twl4030.txt b/Documentation/devicetree/bindings/sound/omap-twl4030.txt new file mode 100644 index 0000000000000000000000000000000000000000..6fae51c7f766fe995ba96627cde3f1bfeb661426 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-twl4030.txt @@ -0,0 +1,17 @@ +* Texas Instruments SoC with twl4030 based audio setups + +Required properties: +- compatible: "ti,omap-twl4030" +- ti,model: Name of the sound card (for example "omap3beagle") +- ti,mcbsp: phandle for the McBSP node +- ti,codec: phandle for the twl4030 audio node + +Example: + +sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; +}; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt new file mode 100644 index 0000000000000000000000000000000000000000..e7b98f41fa5fd14eba634184848529f1b519a68c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt @@ -0,0 +1,20 @@ +Texas Instruments - tlv320aic3x Codec module + +The tlv320aic3x serial control bus communicates through I2C protocols + +Required properties: +- compatible - "string" - "ti,tlv320aic3x" +- reg - - I2C slave address + + +Optional properties: + +- gpio-reset - gpio pin number used for codec reset +- ai3x-gpio-func - - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality + +Example: + +tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; +}; diff --git a/Documentation/devicetree/bindings/sound/ux500-mop500.txt b/Documentation/devicetree/bindings/sound/ux500-mop500.txt new file mode 100644 index 0000000000000000000000000000000000000000..48e071c96b465ed2bfbe599d7f322557833614af --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ux500-mop500.txt @@ -0,0 +1,39 @@ +* MOP500 Audio Machine Driver + +This node is responsible for linking together all ux500 Audio Driver components. + +Required properties: + - compatible : "stericsson,snd-soc-mop500" + +Non-standard properties: + - stericsson,cpu-dai : Phandle to the CPU-side DAI + - stericsson,audio-codec : Phandle to the Audio CODEC + - stericsson,card-name : Over-ride default card name + +Example: + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + msp1: msp@80124000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80124000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + + msp3: msp@80125000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80125000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; diff --git a/Documentation/devicetree/bindings/sound/ux500-msp.txt b/Documentation/devicetree/bindings/sound/ux500-msp.txt new file mode 100644 index 0000000000000000000000000000000000000000..99acd9c774e1df5303caf14894819c1c952cb369 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/ux500-msp.txt @@ -0,0 +1,43 @@ +* ux500 MSP (CPU-side Digital Audio Interface) + +Required properties: + - compatible :"stericsson,ux500-msp-i2s" + - reg : Physical base address and length of the device's registers. + +Optional properties: + - interrupts : The interrupt output from the device. + - interrupt-parent : The parent interrupt controller. + - -supply : Phandle to the regulator supply + +Example: + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,platform-pcm-dma = <&pcm>; + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + pcm: ux500-pcm { + compatible = "stericsson,ux500-pcm"; + }; + + msp1: msp@80124000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80124000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + + msp3: msp@80125000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80125000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + }; + + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; diff --git a/Documentation/devicetree/bindings/spi/mxs-spi.txt b/Documentation/devicetree/bindings/spi/mxs-spi.txt new file mode 100644 index 0000000000000000000000000000000000000000..e2e13957c2a4102179f4a28f7ef1bedd21e91c1c --- /dev/null +++ b/Documentation/devicetree/bindings/spi/mxs-spi.txt @@ -0,0 +1,22 @@ +* Freescale MX233/MX28 SSP/SPI + +Required properties: +- compatible: Should be "fsl,-spi", where soc is "imx23" or "imx28" +- reg: Offset and length of the register set for the device +- interrupts: Should contain SSP interrupts (error irq first, dma irq second) +- fsl,ssp-dma-channel: APBX DMA channel for the SSP + +Optional properties: +- clock-frequency : Input clock frequency to the SPI block in Hz. + Default is 160000000 Hz. + +Example: + +ssp0: ssp@80010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + reg = <0x80010000 0x2000>; + interrupts = <96 82>; + fsl,ssp-dma-channel = <0>; +}; diff --git a/Documentation/devicetree/bindings/spi/spi-bus.txt b/Documentation/devicetree/bindings/spi/spi-bus.txt index e782add2e457df2b9e22d75f799900a4d9256e7f..d2c33d0f533ec8702938b017c470faf073db9032 100644 --- a/Documentation/devicetree/bindings/spi/spi-bus.txt +++ b/Documentation/devicetree/bindings/spi/spi-bus.txt @@ -21,6 +21,9 @@ assumption that board specific platform code will be used to manage chip selects. Individual drivers can define additional properties to support describing the chip select layout. +Optional property: +- num-cs : total number of chipselects + SPI slave nodes must be children of the SPI master node and can contain the following properties. - reg - (required) chip select address of device. diff --git a/Documentation/devicetree/bindings/spi/spi-gpio.txt b/Documentation/devicetree/bindings/spi/spi-gpio.txt new file mode 100644 index 0000000000000000000000000000000000000000..8a824be15754a6b488930d60c1c7fba174ef1932 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-gpio.txt @@ -0,0 +1,29 @@ +SPI-GPIO devicetree bindings + +Required properties: + + - compatible: should be set to "spi-gpio" + - #address-cells: should be set to <0x1> + - ranges + - gpio-sck: GPIO spec for the SCK line to use + - gpio-miso: GPIO spec for the MISO line to use + - gpio-mosi: GPIO spec for the MOSI line to use + - cs-gpios: GPIOs to use for chipselect lines + - num-chipselects: number of chipselect lines + +Example: + + spi { + compatible = "spi-gpio"; + #address-cells = <0x1>; + ranges; + + gpio-sck = <&gpio 95 0>; + gpio-miso = <&gpio 98 0>; + gpio-mosi = <&gpio 97 0>; + cs-gpios = <&gpio 125 0>; + num-chipselects = <1>; + + /* clients */ + }; + diff --git a/Documentation/devicetree/bindings/spi/spi-octeon.txt b/Documentation/devicetree/bindings/spi/spi-octeon.txt new file mode 100644 index 0000000000000000000000000000000000000000..431add192342ec320b4e0718b22f45aa4f7630c5 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-octeon.txt @@ -0,0 +1,33 @@ +Cavium, Inc. OCTEON SOC SPI master controller. + +Required properties: +- compatible : "cavium,octeon-3010-spi" +- reg : The register base for the controller. +- interrupts : One interrupt, used by the controller. +- #address-cells : <1>, as required by generic SPI binding. +- #size-cells : <0>, also as required by generic SPI binding. + +Child nodes as per the generic SPI binding. + +Example: + + spi@1070000001000 { + compatible = "cavium,octeon-3010-spi"; + reg = <0x10700 0x00001000 0x0 0x100>; + interrupts = <0 58>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "st,m95256", "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; + + pagesize = <64>; + size = <32768>; + address-width = <16>; + }; + }; + diff --git a/Documentation/devicetree/bindings/spi/spi-sc18is602.txt b/Documentation/devicetree/bindings/spi/spi-sc18is602.txt new file mode 100644 index 0000000000000000000000000000000000000000..02f9033270a2467c13b68a963b292b3353a2f0df --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-sc18is602.txt @@ -0,0 +1,23 @@ +NXP SC18IS602/SCIS603 + +Required properties: + - compatible : Should be one of + "nxp,sc18is602" + "nxp,sc18is602b" + "nxp,sc18is603" + - reg: I2C bus address + +Optional properties: + - clock-frequency : external oscillator clock frequency. If not + specified, the SC18IS602 default frequency (7372000) will be used. + +The clock-frequency property is relevant and needed only if the chip has an +external oscillator (SC18IS603). + +Example: + + sc18is603@28 { + compatible = "nxp,sc18is603"; + reg = <0x28>; + clock-frequency = <14744000>; + } diff --git a/Documentation/devicetree/bindings/spi/spi_pl022.txt b/Documentation/devicetree/bindings/spi/spi_pl022.txt index 306ec3ff3c0e3be27a200ae5fdf215f483fe5eab..f158fd31cfda71a3ab69984c54cbeab3fa22bc61 100644 --- a/Documentation/devicetree/bindings/spi/spi_pl022.txt +++ b/Documentation/devicetree/bindings/spi/spi_pl022.txt @@ -6,7 +6,29 @@ Required properties: - interrupts : Should contain SPI controller interrupt Optional properties: +- num-cs : total number of chipselects - cs-gpios : should specify GPIOs used for chipselects. The gpios will be referred to as reg = in the SPI child nodes. If unspecified, a single SPI device without a chip select can be used. +- pl022,autosuspend-delay : delay in ms following transfer completion before + the runtime power management system suspends the + device. A setting of 0 indicates no delay and the + device will be suspended immediately +- pl022,rt : indicates the controller should run the message pump with realtime + priority to minimise the transfer latency on the bus (boolean) + + +SPI slave nodes must be children of the SPI master node and can +contain the following properties. + +- pl022,interface : interface type: + 0: SPI + 1: Texas Instruments Synchronous Serial Frame Format + 2: Microwire (Half Duplex) +- pl022,com-mode : polling, interrupt or dma +- pl022,rx-level-trig : Rx FIFO watermark level +- pl022,tx-level-trig : Tx FIFO watermark level +- pl022,ctrl-len : Microwire interface: Control length +- pl022,wait-state : Microwire interface: Wait state +- pl022,duplex : Microwire interface: Full/Half duplex diff --git a/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt new file mode 100644 index 0000000000000000000000000000000000000000..801d58cb6d4d39ba6bd02652ef6c8d9bde108399 --- /dev/null +++ b/Documentation/devicetree/bindings/staging/iio/adc/mxs-lradc.txt @@ -0,0 +1,15 @@ +* Freescale i.MX28 LRADC device driver + +Required properties: +- compatible: Should be "fsl,imx28-lradc" +- reg: Address and length of the register set for the device +- interrupts: Should contain the LRADC interrupts + +Examples: + + lradc@80050000 { + compatible = "fsl,imx28-lradc"; + reg = <0x80050000 0x2000>; + interrupts = <10 14 15 16 17 18 19 + 20 21 22 23 24 25>; + }; diff --git a/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt new file mode 100644 index 0000000000000000000000000000000000000000..07654f0338b68abc4df7502819993acf637268ee --- /dev/null +++ b/Documentation/devicetree/bindings/staging/imx-drm/fsl-imx-drm.txt @@ -0,0 +1,41 @@ +Freescale i.MX IPUv3 +==================== + +Required properties: +- compatible: Should be "fsl,-ipu" +- reg: should be register base and length as documented in the + datasheet +- interrupts: Should contain sync interrupt and error interrupt, + in this order. +- #crtc-cells: 1, See below + +example: + +ipu: ipu@18000000 { + #crtc-cells = <1>; + compatible = "fsl,imx53-ipu"; + reg = <0x18000000 0x080000000>; + interrupts = <11 10>; +}; + +Parallel display support +======================== + +Required properties: +- compatible: Should be "fsl,imx-parallel-display" +- crtc: the crtc this display is connected to, see below +Optional properties: +- interface_pix_fmt: How this display is connected to the + crtc. Currently supported types: "rgb24", "rgb565" +- edid: verbatim EDID data block describing attached display. +- ddc: phandle describing the i2c bus handling the display data + channel + +example: + +display@di0 { + compatible = "fsl,imx-parallel-display"; + edid = [edid-data]; + crtc = <&ipu 0>; + interface-pix-fmt = "rgb24"; +}; diff --git a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt new file mode 100644 index 0000000000000000000000000000000000000000..2de21c2acf55d022681059e3ec690b1ed623e1cd --- /dev/null +++ b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt @@ -0,0 +1,22 @@ +BCM2835 System Timer + +The System Timer peripheral provides four 32-bit timer channels and a +single 64-bit free running counter. Each channel has an output compare +register, which is compared against the 32 least significant bits of the +free running counter values, and generates an interrupt. + +Required properties: + +- compatible : should be "brcm,bcm2835-system-timer.txt" +- reg : Specifies base physical address and size of the registers. +- interrupts : A list of 4 interrupt sinks; one per timer channel. +- clock-frequency : The frequency of the clock that drives the counter, in Hz. + +Example: + +timer { + compatible = "brcm,bcm2835-system-timer"; + reg = <0x7e003000 0x1000>; + interrupts = <1 0>, <1 1>, <1 2>, <1 3>; + clock-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt b/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt new file mode 100644 index 0000000000000000000000000000000000000000..0d439dfc1aa5bad5215ec62ea583dbf97b34a5e4 --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/nxp-lpc32xx-hsuart.txt @@ -0,0 +1,14 @@ +* NXP LPC32xx SoC High Speed UART + +Required properties: +- compatible: Should be "nxp,lpc3220-hsuart" +- reg: Should contain registers location and length +- interrupts: Should contain interrupt + +Example: + + uart1: serial@40014000 { + compatible = "nxp,lpc3220-hsuart"; + reg = <0x40014000 0x1000>; + interrupts = <26 0>; + }; diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt index 0847fdeee11a5b2961731b97c017df5bf4f4f9ca..ba385f2e0ddc5777daf3f7e9d667e6727ec4c26d 100644 --- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt +++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt @@ -25,6 +25,8 @@ Optional properties: accesses to the UART (e.g. TI davinci). - used-by-rtas : set to indicate that the port is in use by the OpenFirmware RTAS and should not be registered. +- no-loopback-test: set to indicate that the port does not implements loopback + test mode Example: diff --git a/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt b/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt new file mode 100644 index 0000000000000000000000000000000000000000..5feef1ef167d3a518166899a2f50afd0aebaaf2c --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/via,vt8500-uart.txt @@ -0,0 +1,17 @@ +VIA/Wondermedia VT8500 UART Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-uart" +- reg : Should contain 1 register ranges(address and length) +- interrupts : UART interrupt +- clocks : phandle to the uart source clock (usually a 24Mhz fixed clock) + +Example: + + uart@d8210000 { + compatible = "via,vt8500-uart"; + reg = <0xd8210000 0x1040>; + interrupts = <47>; + clocks = <&ref24>; + }; diff --git a/Documentation/devicetree/bindings/usb/am33xx-usb.txt b/Documentation/devicetree/bindings/usb/am33xx-usb.txt new file mode 100644 index 0000000000000000000000000000000000000000..ca8fa56e9f03e6d5f6ad4a0f35885e9fb4fa66ed --- /dev/null +++ b/Documentation/devicetree/bindings/usb/am33xx-usb.txt @@ -0,0 +1,14 @@ +AM33XX MUSB GLUE + - compatible : Should be "ti,musb-am33xx" + - ti,hwmods : must be "usb_otg_hs" + - multipoint : Should be "1" indicating the musb controller supports + multipoint. This is a MUSB configuration-specific setting. + - num_eps : Specifies the number of endpoints. This is also a + MUSB configuration-specific setting. Should be set to "16" + - ram_bits : Specifies the ram address size. Should be set to "12" + - port0_mode : Should be "3" to represent OTG. "1" signifies HOST and "2" + represents PERIPHERAL. + - port1_mode : Should be "1" to represent HOST. "3" signifies OTG and "2" + represents PERIPHERAL. + - power : Should be "250". This signifies the controller can supply upto + 500mA when operating in host mode. diff --git a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt index 2c290418bb2dd5f802aa71c80dfd468e06d91e7f..5778b9c83bd845692a4eda281ec842eb1864ac6e 100644 --- a/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt +++ b/Documentation/devicetree/bindings/usb/ci13xxx-imx.txt @@ -7,7 +7,10 @@ Required properties: Optional properties: - fsl,usbphy: phandler of usb phy that connects to the only one port +- fsl,usbmisc: phandler of non-core register device, with one argument + that indicate usb controller index - vbus-supply: regulator for vbus +- disable-over-current: disable over current detect Examples: usb@02184000 { /* USB OTG */ @@ -15,4 +18,6 @@ usb@02184000 { /* USB OTG */ reg = <0x02184000 0x200>; interrupts = <0 43 0x04>; fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + disable-over-current; }; diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt new file mode 100644 index 0000000000000000000000000000000000000000..29a043ecda523d35e5a1becba9c4e9e748ef781e --- /dev/null +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -0,0 +1,33 @@ +OMAP GLUE + +OMAP MUSB GLUE + - compatible : Should be "ti,omap4-musb" or "ti,omap3-musb" + - ti,hwmods : must be "usb_otg_hs" + - multipoint : Should be "1" indicating the musb controller supports + multipoint. This is a MUSB configuration-specific setting. + - num_eps : Specifies the number of endpoints. This is also a + MUSB configuration-specific setting. Should be set to "16" + - ram_bits : Specifies the ram address size. Should be set to "12" + - interface_type : This is a board specific setting to describe the type of + interface between the controller and the phy. It should be "0" or "1" + specifying ULPI and UTMI respectively. + - mode : Should be "3" to represent OTG. "1" signifies HOST and "2" + represents PERIPHERAL. + - power : Should be "50". This signifies the controller can supply upto + 100mA when operating in host mode. + +SOC specific device node entry +usb_otg_hs: usb_otg_hs@4a0ab000 { + compatible = "ti,omap4-musb"; + ti,hwmods = "usb_otg_hs"; + multipoint = <1>; + num_eps = <16>; + ram_bits = <12>; +}; + +Board specific device node entry +&usb_otg_hs { + interface_type = <1>; + mode = <3>; + power = <50>; +}; diff --git a/Documentation/devicetree/bindings/usb/platform-uhci.txt b/Documentation/devicetree/bindings/usb/platform-uhci.txt new file mode 100644 index 0000000000000000000000000000000000000000..a4fb0719d157195e18c7873ef9c03ec42ff98858 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/platform-uhci.txt @@ -0,0 +1,15 @@ +Generic Platform UHCI Controller +----------------------------------------------------- + +Required properties: +- compatible : "platform-uhci" +- reg : Should contain 1 register ranges(address and length) +- interrupts : UHCI controller interrupt + +Example: + + uhci@d8007b00 { + compatible = "platform-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <43>; + }; diff --git a/Documentation/devicetree/bindings/usb/pxa-usb.txt b/Documentation/devicetree/bindings/usb/pxa-usb.txt new file mode 100644 index 0000000000000000000000000000000000000000..79729a948d5afb5d837d0901c2e05d405485bc4d --- /dev/null +++ b/Documentation/devicetree/bindings/usb/pxa-usb.txt @@ -0,0 +1,31 @@ +PXA USB controllers + +OHCI + +Required properties: + - compatible: Should be "marvell,pxa-ohci" for USB controllers + used in host mode. + +Optional properties: + - "marvell,enable-port1", "marvell,enable-port2", "marvell,enable-port3" + If present, enables the appropriate USB port of the controller. + - "marvell,port-mode" selects the mode of the ports: + 1 = PMM_NPS_MODE + 2 = PMM_GLOBAL_MODE + 3 = PMM_PERPORT_MODE + - "marvell,power-sense-low" - power sense pin is low-active. + - "marvell,power-control-low" - power control pin is low-active. + - "marvell,no-oc-protection" - disable over-current protection. + - "marvell,oc-mode-perport" - enable per-port over-current protection. + - "marvell,power_on_delay" Power On to Power Good time - in ms. + +Example: + + usb0: ohci@4c000000 { + compatible = "marvell,pxa-ohci", "usb-ohci"; + reg = <0x4c000000 0x100000>; + interrupts = <18>; + marvell,enable-port1; + marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */ + }; + diff --git a/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt new file mode 100644 index 0000000000000000000000000000000000000000..36b9aede3f40d04b4b173ffede953b3b226135ea --- /dev/null +++ b/Documentation/devicetree/bindings/usb/twlxxxx-usb.txt @@ -0,0 +1,40 @@ +USB COMPARATOR OF TWL CHIPS + +TWL6030 USB COMPARATOR + - compatible : Should be "ti,twl6030-usb" + - interrupts : Two interrupt numbers to the cpu should be specified. First + interrupt number is the otg interrupt number that raises ID interrupts when + the controller has to act as host and the second interrupt number is the + usb interrupt number that raises VBUS interrupts when the controller has to + act as device + - usb-supply : phandle to the regulator device tree node. It should be vusb + if it is twl6030 or ldousb if it is twl6025 subclass. + +twl6030-usb { + compatible = "ti,twl6030-usb"; + interrupts = < 4 10 >; +}; + +Board specific device node entry +&twl6030-usb { + usb-supply = <&vusb>; +}; + +TWL4030 USB PHY AND COMPARATOR + - compatible : Should be "ti,twl4030-usb" + - interrupts : The interrupt numbers to the cpu should be specified. First + interrupt number is the otg interrupt number that raises ID interrupts + and VBUS interrupts. The second interrupt number is optional. + - -supply : phandle to the regulator device tree node. + should be vusb1v5, vusb1v8 and vusb3v1 + - usb_mode : The mode used by the phy to connect to the controller. "1" + specifies "ULPI" mode and "2" specifies "CEA2011_3PIN" mode. + +twl4030-usb { + compatible = "ti,twl4030-usb"; + interrupts = < 10 4 >; + usb1v5-supply = <&vusb1v5>; + usb1v8-supply = <&vusb1v8>; + usb3v1-supply = <&vusb3v1>; + usb_mode = <1>; +}; diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt new file mode 100644 index 0000000000000000000000000000000000000000..80d4148cb6616fb29d9d5dc3a09fe365232f5779 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-phy.txt @@ -0,0 +1,17 @@ +USB PHY + +OMAP USB2 PHY + +Required properties: + - compatible: Should be "ti,omap-usb2" + - reg : Address and length of the register set for the device. Also +add the address of control module dev conf register until a driver for +control module is added + +This is usually a subnode of ocp2scp to which it is connected. + +usb2phy@4a0ad080 { + compatible = "ti,omap-usb2"; + reg = <0x4a0ad080 0x58>, + <0x4a002300 0x4>; +}; diff --git a/Documentation/devicetree/bindings/usb/usbmisc-imx.txt b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt new file mode 100644 index 0000000000000000000000000000000000000000..97ce94e1a6cc68ed112ceeb1d7c9da7dfbc81848 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usbmisc-imx.txt @@ -0,0 +1,14 @@ +* Freescale i.MX non-core registers + +Required properties: +- #index-cells: Cells used to descibe usb controller index. Should be <1> +- compatible: Should be one of below: + "fsl,imx6q-usbmisc" for imx6q +- reg: Should contain registers location and length + +Examples: +usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; +}; diff --git a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt new file mode 100644 index 0000000000000000000000000000000000000000..17b3ad1d97e78da7ecb8277ef86e505e494c9582 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt @@ -0,0 +1,15 @@ +VIA/Wondermedia VT8500 EHCI Controller +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-ehci" +- reg : Should contain 1 register ranges(address and length) +- interrupts : ehci controller interrupt + +Example: + + ehci@d8007900 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007900 0x200>; + interrupts = <43>; + }; diff --git a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/vt8500-ehci.txt new file mode 100644 index 0000000000000000000000000000000000000000..5fb8fd6e250cf722108516c829eac6df2225bd66 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/vt8500-ehci.txt @@ -0,0 +1,12 @@ +VIA VT8500 and Wondermedia WM8xxx SoC USB controllers. + +Required properties: + - compatible: Should be "via,vt8500-ehci" or "wm,prizm-ehci". + - reg: Address range of the ehci registers. size should be 0x200 + - interrupts: Should contain the ehci interrupt. + +usb: ehci@D8007100 { + compatible = "wm,prizm-ehci", "usb-ehci"; + reg = <0xD8007100 0x200>; + interrupts = <1>; +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index db4d3af3643c407ffad6e4ead2dd81d8c4ab36cf..9de2b9ff9d6ed6067e31c7fbe1533eb1f4a738f3 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -10,6 +10,7 @@ apm Applied Micro Circuits Corporation (APM) arm ARM Ltd. atmel Atmel Corporation bosch Bosch Sensortec GmbH +brcm Broadcom Corporation cavium Cavium, Inc. chrp Common Hardware Reference Platform cortina Cortina Systems, Inc. @@ -47,5 +48,7 @@ sirf SiRF Technology, Inc. st STMicroelectronics stericsson ST-Ericsson ti Texas Instruments +via VIA Technologies, Inc. wlf Wolfson Microelectronics +wm Wondermedia Technologies, Inc. xlnx Xilinx diff --git a/Documentation/devicetree/bindings/video/backlight/88pm860x.txt b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt new file mode 100644 index 0000000000000000000000000000000000000000..261df2799315b2b645f54454a1ef6f5e1bb42766 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt @@ -0,0 +1,15 @@ +88pm860x-backlight bindings + +Optional properties: + - marvell,88pm860x-iset: Current supplies on backlight device. + - marvell,88pm860x-pwm: PWM frequency on backlight device. + +Example: + + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; diff --git a/Documentation/devicetree/bindings/video/via,vt8500-fb.txt b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt new file mode 100644 index 0000000000000000000000000000000000000000..c870b6478ec81861ada145526dc8c0644b1806aa --- /dev/null +++ b/Documentation/devicetree/bindings/video/via,vt8500-fb.txt @@ -0,0 +1,62 @@ +VIA VT8500 Framebuffer +----------------------------------------------------- + +Required properties: +- compatible : "via,vt8500-fb" +- reg : Should contain 1 register ranges(address and length) +- interrupts : framebuffer controller interrupt +- display: a phandle pointing to the display node + +Required nodes: +- display: a display node is required to initialize the lcd panel + This should be in the board dts. +- default-mode: a videomode within the display with timing parameters + as specified below. + +Example: + + fb@d800e400 { + compatible = "via,vt8500-fb"; + reg = <0xd800e400 0x400>; + interrupts = <12>; + display = <&display>; + default-mode = <&mode0>; + }; + +VIA VT8500 Display +----------------------------------------------------- +Required properties (as per of_videomode_helper): + + - hactive, vactive: Display resolution + - hfront-porch, hback-porch, hsync-len: Horizontal Display timing parameters + in pixels + vfront-porch, vback-porch, vsync-len: Vertical display timing parameters in + lines + - clock: displayclock in Hz + - bpp: lcd panel bit-depth. + <16> for RGB565, <32> for RGB888 + +Optional properties (as per of_videomode_helper): + - width-mm, height-mm: Display dimensions in mm + - hsync-active-high (bool): Hsync pulse is active high + - vsync-active-high (bool): Vsync pulse is active high + - interlaced (bool): This is an interlaced mode + - doublescan (bool): This is a doublescan mode + +Example: + display: display@0 { + modes { + mode0: mode@0 { + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + clock = <0>; /* unused but required */ + bpp = <16>; /* non-standard but required */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt b/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt new file mode 100644 index 0000000000000000000000000000000000000000..a850fa011f029f1e6bd056bb6dca6dc684209788 --- /dev/null +++ b/Documentation/devicetree/bindings/video/wm,prizm-ge-rops.txt @@ -0,0 +1,13 @@ +VIA/Wondermedia Graphics Engine Controller +----------------------------------------------------- + +Required properties: +- compatible : "wm,prizm-ge-rops" +- reg : Should contain 1 register ranges(address and length) + +Example: + + ge_rops@d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + }; diff --git a/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt new file mode 100644 index 0000000000000000000000000000000000000000..3d325e1d11ee64fd80ebfc61a3ae45fbf390b1cc --- /dev/null +++ b/Documentation/devicetree/bindings/video/wm,wm8505-fb.txt @@ -0,0 +1,23 @@ +Wondermedia WM8505 Framebuffer +----------------------------------------------------- + +Required properties: +- compatible : "wm,wm8505-fb" +- reg : Should contain 1 register ranges(address and length) +- via,display: a phandle pointing to the display node + +Required nodes: +- display: a display node is required to initialize the lcd panel + This should be in the board dts. See definition in + Documentation/devicetree/bindings/video/via,vt8500-fb.txt +- default-mode: a videomode node as specified in + Documentation/devicetree/bindings/video/via,vt8500-fb.txt + +Example: + + fb@d8050800 { + compatible = "wm,wm8505-fb"; + reg = <0xd8050800 0x200>; + display = <&display>; + default-mode = <&mode0>; + }; diff --git a/Documentation/devicetree/bindings/w1/w1-gpio.txt b/Documentation/devicetree/bindings/w1/w1-gpio.txt new file mode 100644 index 0000000000000000000000000000000000000000..6e09c35d9f1a281a0046ed2c07dfce1f1312f48f --- /dev/null +++ b/Documentation/devicetree/bindings/w1/w1-gpio.txt @@ -0,0 +1,22 @@ +w1-gpio devicetree bindings + +Required properties: + + - compatible: "w1-gpio" + - gpios: one or two GPIO specs: + - the first one is used as data I/O pin + - the second one is optional. If specified, it is used as + enable pin for an external pin pullup. + +Optional properties: + + - linux,open-drain: if specified, the data pin is considered in + open-drain mode. + +Examples: + + onewire@0 { + compatible = "w1-gpio"; + gpios = <&gpio 126 0>, <&gpio 105 0>; + }; + diff --git a/Documentation/dontdiff b/Documentation/dontdiff index 39462cf35cd4fe946dd0f0f5668defddde60d3cf..74c25c8d8884633c7275b590a48a229482685bbd 100644 --- a/Documentation/dontdiff +++ b/Documentation/dontdiff @@ -162,7 +162,6 @@ mach-types.h machtypes.h map map_hugetlb -maui_boot.h media mconf miboot* diff --git a/Documentation/dvb/README.dvb-usb b/Documentation/dvb/README.dvb-usb index c4d963a67d6ffc1ec7e54b8d31cc7d9b41537796..8eb92264ee047163caa25738a30c09ad04d20fcc 100644 --- a/Documentation/dvb/README.dvb-usb +++ b/Documentation/dvb/README.dvb-usb @@ -30,7 +30,7 @@ with the device via the bus. The connection between the DVB-API-functionality is done via callbacks, assigned in a static device-description (struct dvb_usb_device) each device-driver has to have. -For an example have a look in drivers/media/dvb/dvb-usb/vp7045*. +For an example have a look in drivers/media/usb/dvb-usb/vp7045*. Objective is to migrate all the usb-devices (dibusb, cinergyT2, maybe the ttusb; flexcop-usb already benefits from the generic flexcop-device) to use diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index 12d3952e83d5b0305c26afba116047aabf3c2850..32bc56b13b1c7c527669d0a2525486f46115faee 100755 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -116,7 +116,7 @@ sub tda10045 { sub tda10046 { my $sourcefile = "TT_PCI_2.19h_28_11_2006.zip"; - my $url = "http://www.tt-download.com/download/updates/219/$sourcefile"; + my $url = "http://technotrend.com.ua/download/software/219/$sourcefile"; my $hash = "6a7e1e2f2644b162ff0502367553c72d"; my $outfile = "dvb-fe-tda10046.fw"; my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt deleted file mode 100644 index afaff312bf415acb59449aeb9bee4c848c197ff2..0000000000000000000000000000000000000000 --- a/Documentation/feature-removal-schedule.txt +++ /dev/null @@ -1,639 +0,0 @@ -The following is a list of files and features that are going to be -removed in the kernel source tree. Every entry should contain what -exactly is going away, why it is happening, and who is going to be doing -the work. When the feature is removed from the kernel, it should also -be removed from this file. The suggested deprecation period is 3 releases. - ---------------------------- - -What: ddebug_query="query" boot cmdline param -When: v3.8 -Why: obsoleted by dyndbg="query" and module.dyndbg="query" -Who: Jim Cromie , Jason Baron - ---------------------------- - -What: /proc/sys/vm/nr_pdflush_threads -When: 2012 -Why: Since pdflush is deprecated, the interface exported in /proc/sys/vm/ - should be removed. -Who: Wanpeng Li - ---------------------------- - -What: CONFIG_APM_CPU_IDLE, and its ability to call APM BIOS in idle -When: 2012 -Why: This optional sub-feature of APM is of dubious reliability, - and ancient APM laptops are likely better served by calling HLT. - Deleting CONFIG_APM_CPU_IDLE allows x86 to stop exporting - the pm_idle function pointer to modules. -Who: Len Brown - ----------------------------- - -What: x86_32 "no-hlt" cmdline param -When: 2012 -Why: remove a branch from idle path, simplify code used by everybody. - This option disabled the use of HLT in idle and machine_halt() - for hardware that was flakey 15-years ago. Today we have - "idle=poll" that removed HLT from idle, and so if such a machine - is still running the upstream kernel, "idle=poll" is likely sufficient. -Who: Len Brown - ----------------------------- - -What: x86 "idle=mwait" cmdline param -When: 2012 -Why: simplify x86 idle code -Who: Len Brown - ----------------------------- - -What: PRISM54 -When: 2.6.34 - -Why: prism54 FullMAC PCI / Cardbus devices used to be supported only by the - prism54 wireless driver. After Intersil stopped selling these - devices in preference for the newer more flexible SoftMAC devices - a SoftMAC device driver was required and prism54 did not support - them. The p54pci driver now exists and has been present in the kernel for - a while. This driver supports both SoftMAC devices and FullMAC devices. - The main difference between these devices was the amount of memory which - could be used for the firmware. The SoftMAC devices support a smaller - amount of memory. Because of this the SoftMAC firmware fits into FullMAC - devices's memory. p54pci supports not only PCI / Cardbus but also USB - and SPI. Since p54pci supports all devices prism54 supports - you will have a conflict. I'm not quite sure how distributions are - handling this conflict right now. prism54 was kept around due to - claims users may experience issues when using the SoftMAC driver. - Time has passed users have not reported issues. If you use prism54 - and for whatever reason you cannot use p54pci please let us know! - E-mail us at: linux-wireless@vger.kernel.org - - For more information see the p54 wiki page: - - http://wireless.kernel.org/en/users/Drivers/p54 - -Who: Luis R. Rodriguez - ---------------------------- - -What: The ieee80211_regdom module parameter -When: March 2010 / desktop catchup - -Why: This was inherited by the CONFIG_WIRELESS_OLD_REGULATORY code, - and currently serves as an option for users to define an - ISO / IEC 3166 alpha2 code for the country they are currently - present in. Although there are userspace API replacements for this - through nl80211 distributions haven't yet caught up with implementing - decent alternatives through standard GUIs. Although available as an - option through iw or wpa_supplicant its just a matter of time before - distributions pick up good GUI options for this. The ideal solution - would actually consist of intelligent designs which would do this for - the user automatically even when travelling through different countries. - Until then we leave this module parameter as a compromise. - - When userspace improves with reasonable widely-available alternatives for - this we will no longer need this module parameter. This entry hopes that - by the super-futuristically looking date of "March 2010" we will have - such replacements widely available. - -Who: Luis R. Rodriguez - ---------------------------- - -What: dev->power.power_state -When: July 2007 -Why: Broken design for runtime control over driver power states, confusing - driver-internal runtime power management with: mechanisms to support - system-wide sleep state transitions; event codes that distinguish - different phases of swsusp "sleep" transitions; and userspace policy - inputs. This framework was never widely used, and most attempts to - use it were broken. Drivers should instead be exposing domain-specific - interfaces either to kernel or to userspace. -Who: Pavel Machek - ---------------------------- - -What: /proc//oom_adj -When: August 2012 -Why: /proc//oom_adj allows userspace to influence the oom killer's - badness heuristic used to determine which task to kill when the kernel - is out of memory. - - The badness heuristic has since been rewritten since the introduction of - this tunable such that its meaning is deprecated. The value was - implemented as a bitshift on a score generated by the badness() - function that did not have any precise units of measure. With the - rewrite, the score is given as a proportion of available memory to the - task allocating pages, so using a bitshift which grows the score - exponentially is, thus, impossible to tune with fine granularity. - - A much more powerful interface, /proc//oom_score_adj, was - introduced with the oom killer rewrite that allows users to increase or - decrease the badness score linearly. This interface will replace - /proc//oom_adj. - - A warning will be emitted to the kernel log if an application uses this - deprecated interface. After it is printed once, future warnings will be - suppressed until the kernel is rebooted. - ---------------------------- - -What: remove EXPORT_SYMBOL(kernel_thread) -When: August 2006 -Files: arch/*/kernel/*_ksyms.c -Check: kernel_thread -Why: kernel_thread is a low-level implementation detail. Drivers should - use the API instead which shields them from - implementation details and provides a higherlevel interface that - prevents bugs and code duplication -Who: Christoph Hellwig - ---------------------------- - -What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports - (temporary transition config option provided until then) - The transition config option will also be removed at the same time. -When: before 2.6.19 -Why: Unused symbols are both increasing the size of the kernel binary - and are often a sign of "wrong API" -Who: Arjan van de Ven - ---------------------------- - -What: PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment -When: October 2008 -Why: The stacking of class devices makes these values misleading and - inconsistent. - Class devices should not carry any of these properties, and bus - devices have SUBSYTEM and DRIVER as a replacement. -Who: Kay Sievers - ---------------------------- - -What: ACPI procfs interface -When: July 2008 -Why: ACPI sysfs conversion should be finished by January 2008. - ACPI procfs interface will be removed in July 2008 so that - there is enough time for the user space to catch up. -Who: Zhang Rui - ---------------------------- - -What: CONFIG_ACPI_PROCFS_POWER -When: 2.6.39 -Why: sysfs I/F for ACPI power devices, including AC and Battery, - has been working in upstream kernel since 2.6.24, Sep 2007. - In 2.6.37, we make the sysfs I/F always built in and this option - disabled by default. - Remove this option and the ACPI power procfs interface in 2.6.39. -Who: Zhang Rui - ---------------------------- - -What: /proc/acpi/event -When: February 2008 -Why: /proc/acpi/event has been replaced by events via the input layer - and netlink since 2.6.23. -Who: Len Brown - ---------------------------- - -What: i386/x86_64 bzImage symlinks -When: April 2010 - -Why: The i386/x86_64 merge provides a symlink to the old bzImage - location so not yet updated user space tools, e.g. package - scripts, do not break. -Who: Thomas Gleixner - ---------------------------- - -What: GPIO autorequest on gpio_direction_{input,output}() in gpiolib -When: February 2010 -Why: All callers should use explicit gpio_request()/gpio_free(). - The autorequest mechanism in gpiolib was provided mostly as a - migration aid for legacy GPIO interfaces (for SOC based GPIOs). - Those users have now largely migrated. Platforms implementing - the GPIO interfaces without using gpiolib will see no changes. -Who: David Brownell ---------------------------- - -What: b43 support for firmware revision < 410 -When: The schedule was July 2008, but it was decided that we are going to keep the - code as long as there are no major maintanance headaches. - So it _could_ be removed _any_ time now, if it conflicts with something new. -Why: The support code for the old firmware hurts code readability/maintainability - and slightly hurts runtime performance. Bugfixes for the old firmware - are not provided by Broadcom anymore. -Who: Michael Buesch - ---------------------------- - -What: Ability for non root users to shm_get hugetlb pages based on mlock - resource limits -When: 2.6.31 -Why: Non root users need to be part of /proc/sys/vm/hugetlb_shm_group or - have CAP_IPC_LOCK to be able to allocate shm segments backed by - huge pages. The mlock based rlimit check to allow shm hugetlb is - inconsistent with mmap based allocations. Hence it is being - deprecated. -Who: Ravikiran Thirumalai - ---------------------------- - -What: sysfs ui for changing p4-clockmod parameters -When: September 2009 -Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and - e088e4c9cdb618675874becb91b2fd581ee707e6. - Removal is subject to fixing any remaining bugs in ACPI which may - cause the thermal throttling not to happen at the right time. -Who: Dave Jones , Matthew Garrett - ------------------------------ - -What: fakephp and associated sysfs files in /sys/bus/pci/slots/ -When: 2011 -Why: In 2.6.27, the semantics of /sys/bus/pci/slots was redefined to - represent a machine's physical PCI slots. The change in semantics - had userspace implications, as the hotplug core no longer allowed - drivers to create multiple sysfs files per physical slot (required - for multi-function devices, e.g.). fakephp was seen as a developer's - tool only, and its interface changed. Too late, we learned that - there were some users of the fakephp interface. - - In 2.6.30, the original fakephp interface was restored. At the same - time, the PCI core gained the ability that fakephp provided, namely - function-level hot-remove and hot-add. - - Since the PCI core now provides the same functionality, exposed in: - - /sys/bus/pci/rescan - /sys/bus/pci/devices/.../remove - /sys/bus/pci/devices/.../rescan - - there is no functional reason to maintain fakephp as well. - - We will keep the existing module so that 'modprobe fakephp' will - present the old /sys/bus/pci/slots/... interface for compatibility, - but users are urged to migrate their applications to the API above. - - After a reasonable transition period, we will remove the legacy - fakephp interface. -Who: Alex Chiang - ---------------------------- - -What: CONFIG_RFKILL_INPUT -When: 2.6.33 -Why: Should be implemented in userspace, policy daemon. -Who: Johannes Berg - ----------------------------- - -What: sound-slot/service-* module aliases and related clutters in - sound/sound_core.c -When: August 2010 -Why: OSS sound_core grabs all legacy minors (0-255) of SOUND_MAJOR - (14) and requests modules using custom sound-slot/service-* - module aliases. The only benefit of doing this is allowing - use of custom module aliases which might as well be considered - a bug at this point. This preemptive claiming prevents - alternative OSS implementations. - - Till the feature is removed, the kernel will be requesting - both sound-slot/service-* and the standard char-major-* module - aliases and allow turning off the pre-claiming selectively via - CONFIG_SOUND_OSS_CORE_PRECLAIM and soundcore.preclaim_oss - kernel parameter. - - After the transition phase is complete, both the custom module - aliases and switches to disable it will go away. This removal - will also allow making ALSA OSS emulation independent of - sound_core. The dependency will be broken then too. -Who: Tejun Heo - ----------------------------- - -What: sysfs-class-rfkill state file -When: Feb 2014 -Files: net/rfkill/core.c -Why: Documented as obsolete since Feb 2010. This file is limited to 3 - states while the rfkill drivers can have 4 states. -Who: anybody or Florian Mickler - ----------------------------- - -What: sysfs-class-rfkill claim file -When: Feb 2012 -Files: net/rfkill/core.c -Why: It is not possible to claim an rfkill driver since 2007. This is - Documented as obsolete since Feb 2010. -Who: anybody or Florian Mickler - ----------------------------- - -What: iwlwifi 50XX module parameters -When: 3.0 -Why: The "..50" modules parameters were used to configure 5000 series and - up devices; different set of module parameters also available for 4965 - with same functionalities. Consolidate both set into single place - in drivers/net/wireless/iwlwifi/iwl-agn.c - -Who: Wey-Yi Guy - ----------------------------- - -What: iwl4965 alias support -When: 3.0 -Why: Internal alias support has been present in module-init-tools for some - time, the MODULE_ALIAS("iwl4965") boilerplate aliases can be removed - with no impact. - -Who: Wey-Yi Guy - ---------------------------- - -What: xt_NOTRACK -Files: net/netfilter/xt_NOTRACK.c -When: April 2011 -Why: Superseded by xt_CT -Who: Netfilter developer team - ----------------------------- - -What: IRQF_DISABLED -When: 2.6.36 -Why: The flag is a NOOP as we run interrupt handlers with interrupts disabled -Who: Thomas Gleixner - ----------------------------- - -What: PCI DMA unmap state API -When: August 2012 -Why: PCI DMA unmap state API (include/linux/pci-dma.h) was replaced - with DMA unmap state API (DMA unmap state API can be used for - any bus). -Who: FUJITA Tomonori - ----------------------------- - -What: iwlwifi disable_hw_scan module parameters -When: 3.0 -Why: Hareware scan is the prefer method for iwlwifi devices for - scanning operation. Remove software scan support for all the - iwlwifi devices. - -Who: Wey-Yi Guy - ----------------------------- - -What: Legacy, non-standard chassis intrusion detection interface. -When: June 2011 -Why: The adm9240, w83792d and w83793 hardware monitoring drivers have - legacy interfaces for chassis intrusion detection. A standard - interface has been added to each driver, so the legacy interface - can be removed. -Who: Jean Delvare - ----------------------------- - -What: i2c_driver.attach_adapter - i2c_driver.detach_adapter -When: September 2011 -Why: These legacy callbacks should no longer be used as i2c-core offers - a variety of preferable alternative ways to instantiate I2C devices. -Who: Jean Delvare - ----------------------------- - -What: Opening a radio device node will no longer automatically switch the - tuner mode from tv to radio. -When: 3.3 -Why: Just opening a V4L device should not change the state of the hardware - like that. It's very unexpected and against the V4L spec. Instead, you - switch to radio mode by calling VIDIOC_S_FREQUENCY. This is the second - and last step of the move to consistent handling of tv and radio tuners. -Who: Hans Verkuil - ----------------------------- - -What: CONFIG_CFG80211_WEXT -When: as soon as distributions ship new wireless tools, ie. wpa_supplicant 1.0 - and NetworkManager/connman/etc. that are able to use nl80211 -Why: Wireless extensions are deprecated, and userland tools are moving to - using nl80211. New drivers are no longer using wireless extensions, - and while there might still be old drivers, both new drivers and new - userland no longer needs them and they can't be used for an feature - developed in the past couple of years. As such, compatibility with - wireless extensions in new drivers will be removed. -Who: Johannes Berg - ----------------------------- - -What: g_file_storage driver -When: 3.8 -Why: This driver has been superseded by g_mass_storage. -Who: Alan Stern - ----------------------------- - -What: threeg and interface sysfs files in /sys/devices/platform/acer-wmi -When: 2012 -Why: In 3.0, we can now autodetect internal 3G device and already have - the threeg rfkill device. So, we plan to remove threeg sysfs support - for it's no longer necessary. - - We also plan to remove interface sysfs file that exposed which ACPI-WMI - interface that was used by acer-wmi driver. It will replaced by - information log when acer-wmi initial. -Who: Lee, Chun-Yi - ---------------------------- - -What: /sys/devices/platform/_UDC_/udc/_UDC_/is_dualspeed file and - is_dualspeed line in /sys/devices/platform/ci13xxx_*/udc/device file. -When: 3.8 -Why: The is_dualspeed file is superseded by maximum_speed in the same - directory and is_dualspeed line in device file is superseded by - max_speed line in the same file. - - The maximum_speed/max_speed specifies maximum speed supported by UDC. - To check if dualspeeed is supported, check if the value is >= 3. - Various possible speeds are defined in . -Who: Michal Nazarewicz - ----------------------------- - -What: The XFS nodelaylog mount option -When: 3.3 -Why: The delaylog mode that has been the default since 2.6.39 has proven - stable, and the old code is in the way of additional improvements in - the log code. -Who: Christoph Hellwig - ----------------------------- - -What: iwlagn alias support -When: 3.5 -Why: The iwlagn module has been renamed iwlwifi. The alias will be around - for backward compatibility for several cycles and then dropped. -Who: Don Fry - ----------------------------- - -What: pci_scan_bus_parented() -When: 3.5 -Why: The pci_scan_bus_parented() interface creates a new root bus. The - bus is created with default resources (ioport_resource and - iomem_resource) that are always wrong, so we rely on arch code to - correct them later. Callers of pci_scan_bus_parented() should - convert to using pci_scan_root_bus() so they can supply a list of - bus resources when the bus is created. -Who: Bjorn Helgaas - ----------------------------- - -What: Low Performance USB Block driver ("CONFIG_BLK_DEV_UB") -When: 3.6 -Why: This driver provides support for USB storage devices like "USB - sticks". As of now, it is deactivated in Debian, Fedora and - Ubuntu. All current users can switch over to usb-storage - (CONFIG_USB_STORAGE) which only drawback is the additional SCSI - stack. -Who: Sebastian Andrzej Siewior - ----------------------------- - -What: get_robust_list syscall -When: 2013 -Why: There appear to be no production users of the get_robust_list syscall, - and it runs the risk of leaking address locations, allowing the bypass - of ASLR. It was only ever intended for debugging, so it should be - removed. -Who: Kees Cook - ----------------------------- - -What: Removing the pn544 raw driver. -When: 3.6 -Why: With the introduction of the NFC HCI and SHDL kernel layers, pn544.c - is being replaced by pn544_hci.c which is accessible through the netlink - and socket NFC APIs. Moreover, pn544.c is outdated and does not seem to - work properly with the latest Android stacks. - Having 2 drivers for the same hardware is confusing and as such we - should only keep the one following the kernel NFC APIs. -Who: Samuel Ortiz - ----------------------------- - -What: setitimer accepts user NULL pointer (value) -When: 3.6 -Why: setitimer is not returning -EFAULT if user pointer is NULL. This - violates the spec. -Who: Sasikantha Babu - ----------------------------- - -What: remove bogus DV presets V4L2_DV_1080I29_97, V4L2_DV_1080I30 and - V4L2_DV_1080I25 -When: 3.6 -Why: These HDTV formats do not exist and were added by a confused mind - (that was me, to be precise...) -Who: Hans Verkuil - ----------------------------- - -What: V4L2_CID_HCENTER, V4L2_CID_VCENTER V4L2 controls -When: 3.7 -Why: The V4L2_CID_VCENTER, V4L2_CID_HCENTER controls have been deprecated - for about 4 years and they are not used by any mainline driver. - There are newer controls (V4L2_CID_PAN*, V4L2_CID_TILT*) that provide - similar functionality. -Who: Sylwester Nawrocki - ----------------------------- - -What: cgroup option updates via remount -When: March 2013 -Why: Remount currently allows changing bound subsystems and - release_agent. Rebinding is hardly useful as it only works - when the hierarchy is empty and release_agent itself should be - replaced with conventional fsnotify. - ----------------------------- - -What: xt_recent rev 0 -When: 2013 -Who: Pablo Neira Ayuso -Files: net/netfilter/xt_recent.c - ----------------------------- - -What: KVM debugfs statistics -When: 2013 -Why: KVM tracepoints provide mostly equivalent information in a much more - flexible fashion. - ----------------------------- - -What: at91-mci driver ("CONFIG_MMC_AT91") -When: 3.7 -Why: There are two mci drivers: at91-mci and atmel-mci. The PDC support - was added to atmel-mci as a first step to support more chips. - Then at91-mci was kept only for old IP versions (on at91rm9200 and - at91sam9261). The support of these IP versions has just been added - to atmel-mci, so atmel-mci can be used for all chips. -Who: Ludovic Desroches - ----------------------------- - -What: net/wanrouter/ -When: June 2013 -Why: Unsupported/unmaintained/unused since 2.6 - ----------------------------- - -What: V4L2 selections API target rectangle and flags unification, the - following definitions will be removed: V4L2_SEL_TGT_CROP_ACTIVE, - V4L2_SEL_TGT_COMPOSE_ACTIVE, V4L2_SUBDEV_SEL_*, V4L2_SUBDEV_SEL_FLAG_* - in favor of common V4L2_SEL_TGT_* and V4L2_SEL_FLAG_* definitions. - For more details see include/linux/v4l2-common.h. -When: 3.8 -Why: The regular V4L2 selections and the subdev selection API originally - defined distinct names for the target rectangles and flags - V4L2_SEL_* - and V4L2_SUBDEV_SEL_*. Although, it turned out that the meaning of these - target rectangles is virtually identical and the APIs were consolidated - to use single set of names - V4L2_SEL_*. This didn't involve any ABI - changes. Alias definitions were created for the original ones to avoid - any instabilities in the user space interface. After few cycles these - backward compatibility definitions will be removed. -Who: Sylwester Nawrocki - ----------------------------- - -What: Using V4L2_CAP_VIDEO_CAPTURE and V4L2_CAP_VIDEO_OUTPUT flags - to indicate a V4L2 memory-to-memory device capability -When: 3.8 -Why: New drivers should use new V4L2_CAP_VIDEO_M2M capability flag - to indicate a V4L2 video memory-to-memory (M2M) device and - applications can now identify a M2M video device by checking - for V4L2_CAP_VIDEO_M2M, with VIDIOC_QUERYCAP ioctl. Using ORed - V4L2_CAP_VIDEO_CAPTURE and V4L2_CAP_VIDEO_OUTPUT flags for M2M - devices is ambiguous and may lead, for example, to identifying - a M2M device as a video capture or output device. -Who: Sylwester Nawrocki - ----------------------------- - -What: OMAP private DMA implementation -When: 2013 -Why: We have a DMA engine implementation; all users should be updated - to use this rather than persisting with the old APIs. The old APIs - block merging the old DMA engine implementation into the DMA - engine driver. -Who: Russell King , - Santosh Shilimkar - ----------------------------- diff --git a/Documentation/filesystems/debugfs.txt b/Documentation/filesystems/debugfs.txt index 7a34f827989c1fe5c1f3c29bebf57d101150322c..3a863f6927281bf4e672cf1b8bbeb341c112cb37 100644 --- a/Documentation/filesystems/debugfs.txt +++ b/Documentation/filesystems/debugfs.txt @@ -15,8 +15,8 @@ Debugfs is typically mounted with a command like: mount -t debugfs none /sys/kernel/debug (Or an equivalent /etc/fstab line). -The debugfs root directory is accessible by anyone by default. To -restrict access to the tree the "uid", "gid" and "mode" mount +The debugfs root directory is accessible only to the root user by +default. To change access to the tree the "uid", "gid" and "mode" mount options can be used. Note that the debugfs API is exported GPL-only to modules. diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 1b7f9acbcbbe450c8d0f3f8a16d592275c61a5dd..104322bf378c314061ae906433e0e81a9abde7e0 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -375,6 +375,16 @@ dioread_nolock locking. If the dioread_nolock option is specified Because of the restrictions this options comprises it is off by default (e.g. dioread_lock). +max_dir_size_kb=n This limits the size of directories so that any + attempt to expand them beyond the specified + limit in kilobytes will cause an ENOSPC error. + This is useful in memory constrained + environments, where a very large directory can + cause severe performance problems or even + provoke the Out Of Memory killer. (For example, + if there is only 512mb memory available, a 176mb + directory may seriously cramp the system's style.) + i_version Enable 64-bit inode version support. This option is off by default. diff --git a/Documentation/filesystems/jfs.txt b/Documentation/filesystems/jfs.txt index 26ebde77e821cecf11062032dfec702513eecd66..f7433355394abf95aa32ea2590e4fe749b32435e 100644 --- a/Documentation/filesystems/jfs.txt +++ b/Documentation/filesystems/jfs.txt @@ -3,6 +3,7 @@ IBM's Journaled File System (JFS) for Linux JFS Homepage: http://jfs.sourceforge.net/ The following mount options are supported: +(*) == default iocharset=name Character set to use for converting from Unicode to ASCII. The default is to do no conversion. Use @@ -21,12 +22,12 @@ nointegrity Do not write to the journal. The primary use of this option from backup media. The integrity of the volume is not guaranteed if the system abnormally abends. -integrity Default. Commit metadata changes to the journal. Use this - option to remount a volume where the nointegrity option was +integrity(*) Commit metadata changes to the journal. Use this option to + remount a volume where the nointegrity option was previously specified in order to restore normal behavior. errors=continue Keep going on a filesystem error. -errors=remount-ro Default. Remount the filesystem read-only on an error. +errors=remount-ro(*) Remount the filesystem read-only on an error. errors=panic Panic and halt the machine if an error occurs. uid=value Override on-disk uid with specified value @@ -35,7 +36,17 @@ umask=value Override on-disk umask with specified octal value. For directories, the execute bit will be set if the corresponding read bit is set. -Please send bugs, comments, cards and letters to shaggy@linux.vnet.ibm.com. +discard=minlen This enables/disables the use of discard/TRIM commands. +discard The discard/TRIM commands are sent to the underlying +nodiscard(*) block device when blocks are freed. This is useful for SSD + devices and sparse/thinly-provisioned LUNs. The FITRIM ioctl + command is also available together with the nodiscard option. + The value of minlen specifies the minimum blockcount, when + a TRIM command to the block device is considered usefull. + When no value is given to the discard option, it defaults to + 64 blocks, which means 256KiB in JFS. + The minlen value of discard overrides the minlen value given + on an FITRIM ioctl(). The JFS mailing list can be subscribed to by using the link labeled "Mail list Subscribe" at our web page http://jfs.sourceforge.net/ diff --git a/Documentation/filesystems/nfs/nfsroot.txt b/Documentation/filesystems/nfs/nfsroot.txt index ffdd9d866ad76cb4bb21553e238a45c8fd3d3c7d..2d66ed688125f894bae223c7e50fa85327ade534 100644 --- a/Documentation/filesystems/nfs/nfsroot.txt +++ b/Documentation/filesystems/nfs/nfsroot.txt @@ -78,7 +78,8 @@ nfsroot=[:][,] flags = hard, nointr, noposix, cto, ac -ip=:::::: +ip=::::::: + : This parameter tells the kernel how to configure IP addresses of devices and also how to set up the IP routing table. It was originally called @@ -158,6 +159,13 @@ ip=:::::: Default: any + IP address of first nameserver. + Value gets exported by /proc/net/pnp which is often linked + on embedded systems by /etc/resolv.conf. + + IP address of secound nameserver. + Same as above. + nfsrootdebug diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index fb0a6aeb936c86237fe19bcdf630339fc43ad348..a1793d670cd01bd374eddf54ffdfc768504291ff 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -33,7 +33,7 @@ Table of Contents 2 Modifying System Parameters 3 Per-Process Parameters - 3.1 /proc//oom_adj & /proc//oom_score_adj - Adjust the oom-killer + 3.1 /proc//oom_score_adj - Adjust the oom-killer score 3.2 /proc//oom_score - Display current oom-killer score 3.3 /proc//io - Display the IO accounting fields @@ -1320,10 +1320,10 @@ of the kernel. CHAPTER 3: PER-PROCESS PARAMETERS ------------------------------------------------------------------------------ -3.1 /proc//oom_adj & /proc//oom_score_adj- Adjust the oom-killer score +3.1 /proc//oom_score_adj- Adjust the oom-killer score -------------------------------------------------------------------------------- -These file can be used to adjust the badness heuristic used to select which +This file can be used to adjust the badness heuristic used to select which process gets killed in out of memory conditions. The badness heuristic assigns a value to each candidate task ranging from 0 @@ -1361,22 +1361,10 @@ same system, cpuset, mempolicy, or memory controller resources to use at least equivalent to discounting 50% of the task's allowed memory from being considered as scoring against the task. -For backwards compatibility with previous kernels, /proc//oom_adj may also -be used to tune the badness score. Its acceptable values range from -16 -(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17 -(OOM_DISABLE) to disable oom killing entirely for that task. Its value is -scaled linearly with /proc//oom_score_adj. - -Writing to /proc//oom_score_adj or /proc//oom_adj will change the -other with its scaled value. - The value of /proc//oom_score_adj may be reduced no lower than the last value set by a CAP_SYS_RESOURCE process. To reduce the value any lower requires CAP_SYS_RESOURCE. -NOTICE: /proc//oom_adj is deprecated and will be removed, please see -Documentation/feature-removal-schedule.txt. - Caveat: when a parent task is selected, the oom killer will sacrifice any first generation children with separate address spaces instead, if possible. This avoids servers and important system daemons from being killed and loses the @@ -1387,9 +1375,7 @@ minimal amount of work. ------------------------------------------------------------- This file can be used to check the current score used by the oom-killer is for -any given . Use it together with /proc//oom_adj to tune which -process should be killed in an out-of-memory situation. - +any given . 3.3 /proc//io - Display the IO accounting fields ------------------------------------------------------- diff --git a/Documentation/filesystems/vfat.txt b/Documentation/filesystems/vfat.txt index ead764b2728f8a20731ece907475b1966a35ce86..de1e6c4dccff047766f1bfc1801319ef28cdf0d1 100644 --- a/Documentation/filesystems/vfat.txt +++ b/Documentation/filesystems/vfat.txt @@ -137,6 +137,17 @@ errors=panic|continue|remount-ro without doing anything or remount the partition in read-only mode (default behavior). +discard -- If set, issues discard/TRIM commands to the block + device when blocks are freed. This is useful for SSD devices + and sparse/thinly-provisoned LUNs. + +nfs -- This option maintains an index (cache) of directory + inodes by i_logstart which is used by the nfs-related code to + improve look-ups. + + Enable this only if you want to export the FAT filesystem + over NFS + : 0,1,yes,no,true,false TODO diff --git a/Documentation/hid/hid-sensor.txt b/Documentation/hid/hid-sensor.txt new file mode 100755 index 0000000000000000000000000000000000000000..948b0989c4335c408cd220cd64d58133d4b1a906 --- /dev/null +++ b/Documentation/hid/hid-sensor.txt @@ -0,0 +1,140 @@ + +HID Sensors Framework +====================== +HID sensor framework provides necessary interfaces to implement sensor drivers, +which are connected to a sensor hub. The sensor hub is a HID device and it provides +a report descriptor conforming to HID 1.12 sensor usage tables. + +Description from the HID 1.12 "HID Sensor Usages" specification: +"Standardization of HID usages for sensors would allow (but not require) sensor +hardware vendors to provide a consistent Plug And Play interface at the USB boundary, +thereby enabling some operating systems to incorporate common device drivers that +could be reused between vendors, alleviating any need for the vendors to provide +the drivers themselves." + +This specification describes many usage IDs, which describe the type of sensor +and also the individual data fields. Each sensor can have variable number of +data fields. The length and order is specified in the report descriptor. For +example a part of report descriptor can look like: + + INPUT(1)[INPUT] + .. + Field(2) + Physical(0020.0073) + Usage(1) + 0020.045f + Logical Minimum(-32767) + Logical Maximum(32767) + Report Size(8) + Report Count(1) + Report Offset(16) + Flags(Variable Absolute) +.. +.. + +The report is indicating "sensor page (0x20)" contains an accelerometer-3D (0x73). +This accelerometer-3D has some fields. Here for example field 2 is motion intensity +(0x045f) with a logical minimum value of -32767 and logical maximum of 32767. The +order of fields and length of each field is important as the input event raw +data will use this format. + + +Implementation +================= + +This specification defines many different types of sensors with different sets of +data fields. It is difficult to have a common input event to user space applications, +for different sensors. For example an accelerometer can send X,Y and Z data, whereas +an ambient light sensor can send illumination data. +So the implementation has two parts: +- Core hid driver +- Individual sensor processing part (sensor drivers) + +Core driver +----------- +The core driver registers (hid-sensor-hub) registers as a HID driver. It parses +report descriptors and identifies all the sensors present. It adds an MFD device +with name HID-SENSOR-xxxx (where xxxx is usage id from the specification). +For example +HID-SENSOR-200073 is registered for an Accelerometer 3D driver. +So if any driver with this name is inserted, then the probe routine for that +function will be called. So an accelerometer processing driver can register +with this name and will be probed if there is an accelerometer-3D detected. + +The core driver provides a set of APIs which can be used by the processing +drivers to register and get events for that usage id. Also it provides parsing +functions, which get and set each input/feature/output report. + +Individual sensor processing part (sensor drivers) +----------- +The processing driver will use an interface provided by the core driver to parse +the report and get the indexes of the fields and also can get events. This driver +can use IIO interface to use the standard ABI defined for a type of sensor. + + +Core driver Interface +===================== + +Callback structure: +Each processing driver can use this structure to set some callbacks. + int (*suspend)(..): Callback when HID suspend is received + int (*resume)(..): Callback when HID resume is received + int (*capture_sample)(..): Capture a sample for one of its data fields + int (*send_event)(..): One complete event is received which can have + multiple data fields. + +Registration functions: +int sensor_hub_register_callback(struct hid_sensor_hub_device *hsdev, + u32 usage_id, + struct hid_sensor_hub_callbacks *usage_callback): + +Registers callbacks for an usage id. The callback functions are not allowed +to sleep. + + +int sensor_hub_remove_callback(struct hid_sensor_hub_device *hsdev, + u32 usage_id): + +Removes callbacks for an usage id. + + +Parsing function: +int sensor_hub_input_get_attribute_info(struct hid_sensor_hub_device *hsdev, + u8 type, + u32 usage_id, u32 attr_usage_id, + struct hid_sensor_hub_attribute_info *info); + +A processing driver can look for some field of interest and check if it exists +in a report descriptor. If it exists it will store necessary information +so that fields can be set or get individually. +These indexes avoid searching every time and getting field index to get or set. + + +Set Feature report +int sensor_hub_set_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, + u32 field_index, s32 value); + +This interface is used to set a value for a field in feature report. For example +if there is a field report_interval, which is parsed by a call to +sensor_hub_input_get_attribute_info before, then it can directly set that individual +field. + + +int sensor_hub_get_feature(struct hid_sensor_hub_device *hsdev, u32 report_id, + u32 field_index, s32 *value); + +This interface is used to get a value for a field in input report. For example +if there is a field report_interval, which is parsed by a call to +sensor_hub_input_get_attribute_info before, then it can directly get that individual +field value. + + +int sensor_hub_input_attr_get_raw_value(struct hid_sensor_hub_device *hsdev, + u32 usage_id, + u32 attr_usage_id, u32 report_id); + +This is used to get a particular field value through input reports. For example +accelerometer wants to poll X axis value, then it can call this function with +the usage id of X axis. HID sensors can provide events, so this is not necessary +to poll for any field. If there is some new sample, the core driver will call +registered callback function to process the sample. diff --git a/Documentation/hwmon/adt7410 b/Documentation/hwmon/adt7410 new file mode 100644 index 0000000000000000000000000000000000000000..96004000dc2a3ef0d622cbccb6c48aa422a0ed9f --- /dev/null +++ b/Documentation/hwmon/adt7410 @@ -0,0 +1,51 @@ +Kernel driver adt7410 +===================== + +Supported chips: + * Analog Devices ADT7410 + Prefix: 'adt7410' + Addresses scanned: I2C 0x48 - 0x4B + Datasheet: Publicly available at the Analog Devices website + http://www.analog.com/static/imported-files/data_sheets/ADT7410.pdf + +Author: Hartmut Knaack + +Description +----------- + +The ADT7410 is a temperature sensor with rated temperature range of -55°C to ++150°C. It has a high accuracy of +/-0.5°C and can be operated at a resolution +of 13 bits (0.0625°C) or 16 bits (0.0078°C). The sensor provides an INT pin to +indicate that a minimum or maximum temperature set point has been exceeded, as +well as a critical temperature (CT) pin to indicate that the critical +temperature set point has been exceeded. Both pins can be set up with a common +hysteresis of 0°C - 15°C and a fault queue, ranging from 1 to 4 events. Both +pins can individually set to be active-low or active-high, while the whole +device can either run in comparator mode or interrupt mode. The ADT7410 +supports continous temperature sampling, as well as sampling one temperature +value per second or even justget one sample on demand for power saving. +Besides, it can completely power down its ADC, if power management is +required. + +Configuration Notes +------------------- + +Since the device uses one hysteresis value, which is an offset to minimum, +maximum and critical temperature, it can only be set for temp#_max_hyst. +However, temp#_min_hyst and temp#_crit_hyst show their corresponding +hysteresis. +The device is set to 16 bit resolution and comparator mode. + +sysfs-Interface +--------------- + +temp#_input - temperature input +temp#_min - temperature minimum setpoint +temp#_max - temperature maximum setpoint +temp#_crit - critical temperature setpoint +temp#_min_hyst - hysteresis for temperature minimum (read-only) +temp#_max_hyst - hysteresis for temperature maximum (read/write) +temp#_crit_hyst - hysteresis for critical temperature (read-only) +temp#_min_alarm - temperature minimum alarm flag +temp#_max_alarm - temperature maximum alarm flag +temp#_crit_alarm - critical temperature alarm flag diff --git a/Documentation/hwmon/ina2xx b/Documentation/hwmon/ina2xx index f50a6cc27616b2b16cf2af6f050cc17c3bf1cbb7..03444f9d833fa4a6e19bc1bec8385cc6f1a00df7 100644 --- a/Documentation/hwmon/ina2xx +++ b/Documentation/hwmon/ina2xx @@ -8,12 +8,24 @@ Supported chips: Datasheet: Publicly available at the Texas Instruments website http://www.ti.com/ + * Texas Instruments INA220 + Prefix: 'ina220' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website + http://www.ti.com/ + * Texas Instruments INA226 Prefix: 'ina226' Addresses: I2C 0x40 - 0x4f Datasheet: Publicly available at the Texas Instruments website http://www.ti.com/ + * Texas Instruments INA230 + Prefix: 'ina230' + Addresses: I2C 0x40 - 0x4f + Datasheet: Publicly available at the Texas Instruments website + http://www.ti.com/ + Author: Lothar Felten Description @@ -23,7 +35,13 @@ The INA219 is a high-side current shunt and power monitor with an I2C interface. The INA219 monitors both shunt drop and supply voltage, with programmable conversion times and filtering. +The INA220 is a high or low side current shunt and power monitor with an I2C +interface. The INA220 monitors both shunt drop and supply voltage. + The INA226 is a current shunt and power monitor with an I2C interface. The INA226 monitors both a shunt voltage drop and bus supply voltage. +The INA230 is a high or low side current shunt and power monitor with an I2C +interface. The INA230 monitors both a shunt voltage drop and bus supply voltage. + The shunt value in micro-ohms can be set via platform data. diff --git a/Documentation/hwmon/lm70 b/Documentation/hwmon/lm70 index 0d240291e3cc4a142d23bf8122e28ece51fd2d4b..86d182942c51498524429f34e7ed979b68dc75b3 100644 --- a/Documentation/hwmon/lm70 +++ b/Documentation/hwmon/lm70 @@ -6,6 +6,10 @@ Supported chips: Datasheet: http://www.national.com/pf/LM/LM70.html * Texas Instruments TMP121/TMP123 Information: http://focus.ti.com/docs/prod/folders/print/tmp121.html + * National Semiconductor LM71 + Datasheet: http://www.ti.com/product/LM71 + * National Semiconductor LM74 + Datasheet: http://www.ti.com/product/LM74 Author: Kaiwan N Billimoria @@ -31,9 +35,11 @@ As a real (in-tree) example of this "SPI protocol driver" interfacing with a "SPI master controller driver", see drivers/spi/spi_lm70llp.c and its associated documentation. -The TMP121/TMP123 are very similar; main differences are 4 wire SPI inter- -face (read only) and 13-bit temperature data (0.0625 degrees celsius reso- -lution). +The LM74 and TMP121/TMP123 are very similar; main difference is 13-bit +temperature data (0.0625 degrees celsius resolution). + +The LM71 is also very similar; main difference is 14-bit temperature +data (0.03125 degrees celsius resolution). Thanks to --------- diff --git a/Documentation/hwmon/max197 b/Documentation/hwmon/max197 new file mode 100644 index 0000000000000000000000000000000000000000..8d89b9009df868e90c3dd6aba287dd28d4f8d251 --- /dev/null +++ b/Documentation/hwmon/max197 @@ -0,0 +1,60 @@ +Maxim MAX197 driver +=================== + +Author: + * Vivien Didelot + +Supported chips: + * Maxim MAX197 + Prefix: 'max197' + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX197.pdf + + * Maxim MAX199 + Prefix: 'max199' + Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX199.pdf + +Description +----------- + +The A/D converters MAX197, and MAX199 are both 8-Channel, Multi-Range, 5V, +12-Bit DAS with 8+4 Bus Interface and Fault Protection. + +The available ranges for the MAX197 are {0,-5V} to 5V, and {0,-10V} to 10V, +while they are {0,-2V} to 2V, and {0,-4V} to 4V on the MAX199. + +Platform data +------------- + +The MAX197 platform data (defined in linux/platform_data/max197.h) should be +filled with a pointer to a conversion function, defined like: + + int convert(u8 ctrl); + +ctrl is the control byte to write to start a new conversion. +On success, the function must return the 12-bit raw value read from the chip, +or a negative error code otherwise. + +Control byte format: + +Bit Name Description +7,6 PD1,PD0 Clock and Power-Down modes +5 ACQMOD Internal or External Controlled Acquisition +4 RNG Full-scale voltage magnitude at the input +3 BIP Unipolar or Bipolar conversion mode +2,1,0 A2,A1,A0 Channel + +Sysfs interface +--------------- + +* in[0-7]_input: The conversion value for the corresponding channel. + RO + +* in[0-7]_min: The lower limit (in mV) for the corresponding channel. + For the MAX197, it will be adjusted to -10000, -5000, or 0. + For the MAX199, it will be adjusted to -4000, -2000, or 0. + RW + +* in[0-7]_max: The higher limit (in mV) for the corresponding channel. + For the MAX197, it will be adjusted to 0, 5000, or 10000. + For the MAX199, it will be adjusted to 0, 2000, or 4000. + RW diff --git a/Documentation/hwmon/mcp3021 b/Documentation/hwmon/mcp3021 index 325fd87e81b22e64a5b0ddaf07647a559b14f730..74a6b72adf5fe4378f692c42e598e80c690fc473 100644 --- a/Documentation/hwmon/mcp3021 +++ b/Documentation/hwmon/mcp3021 @@ -5,18 +5,25 @@ Supported chips: * Microchip Technology MCP3021 Prefix: 'mcp3021' Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/21805a.pdf + * Microchip Technology MCP3221 + Prefix: 'mcp3221' + Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/21732c.pdf -Author: Mingkai Hu +Authors: + Mingkai Hu + Sven Schuchmann Description ----------- -This driver implements support for the Microchip Technology MCP3021 chip. +This driver implements support for the Microchip Technology MCP3021 and +MCP3221 chip. The Microchip Technology Inc. MCP3021 is a successive approximation A/D -converter (ADC) with 10-bit resolution. -This device provides one single-ended input with very low power consumption. -Communication to the MCP3021 is performed using a 2-wire I2C compatible -interface. Standard (100 kHz) and Fast (400 kHz) I2C modes are available. -The default I2C device address is 0x4d (contact the Microchip factory for -additional address options). +converter (ADC) with 10-bit resolution. The MCP3221 has 12-bit resolution. + +These devices provide one single-ended input with very low power consumption. +Communication to the MCP3021/MCP3221 is performed using a 2-wire I2C +compatible interface. Standard (100 kHz) and Fast (400 kHz) I2C modes are +available. The default I2C device address is 0x4d (contact the Microchip +factory for additional address options). diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 615142da4ef64c6ec8ae87893425046a1564e786..157416e78cc4168859c89c88b13bcfeb71c4848f 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -21,6 +21,7 @@ Supported adapters: * Intel DH89xxCC (PCH) * Intel Panther Point (PCH) * Intel Lynx Point (PCH) + * Intel Lynx Point-LP (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 2e758b0e94564042d14d1d763d6a11fc998c181d..b88f91ae580ef53c72b5081d93f392c4b9d05278 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -20,7 +20,10 @@ Supported adapters: Datasheet: available on http://linux.via.com.tw * VIA Technologies, Inc. VX855/VX875 - Datasheet: Availability unknown + Datasheet: available on http://linux.via.com.tw + + * VIA Technologies, Inc. VX900 + Datasheet: available on http://linux.via.com.tw Authors: Kyösti Mälkki , @@ -57,6 +60,7 @@ Your lspci -n listing must show one of these : device 1106:8324 (CX700) device 1106:8353 (VX800/VX820) device 1106:8409 (VX855/VX875) + device 1106:8410 (VX900) If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. diff --git a/Documentation/i2c/muxes/i2c-mux-gpio b/Documentation/i2c/muxes/i2c-mux-gpio index bd9b2299b73992036f39bdbaf4af2667eba0e575..d4d91a53fc39b4c4acd99b6964cf3c2129d601ab 100644 --- a/Documentation/i2c/muxes/i2c-mux-gpio +++ b/Documentation/i2c/muxes/i2c-mux-gpio @@ -63,3 +63,21 @@ static struct platform_device myboard_i2cmux = { .platform_data = &myboard_i2cmux_data, }, }; + +If you don't know the absolute GPIO pin numbers at registration time, +you can instead provide a chip name (.chip_name) and relative GPIO pin +numbers, and the i2c-gpio-mux driver will do the work for you, +including deferred probing if the GPIO chip isn't immediately +available. + +Device Registration +------------------- + +When registering your i2c-gpio-mux device, you should pass the number +of any GPIO pin it uses as the device ID. This guarantees that every +instance has a different ID. + +Alternatively, if you don't need a stable device name, you can simply +pass PLATFORM_DEVID_AUTO as the device ID, and the platform core will +assign a dynamic ID to your device. If you do not know the absolute +GPIO pin numbers at registration time, this is even the only option. diff --git a/Documentation/ia64/aliasing-test.c b/Documentation/ia64/aliasing-test.c index 5caa2af33207917369c1cae917c07384ddc2837c..62a190d45f389335a9366f3240f5b214863eb838 100644 --- a/Documentation/ia64/aliasing-test.c +++ b/Documentation/ia64/aliasing-test.c @@ -132,6 +132,7 @@ static int read_rom(char *path) rc = write(fd, "1", 2); if (rc <= 0) { + close(fd); perror("write"); return -1; } diff --git a/Documentation/infiniband/ipoib.txt b/Documentation/infiniband/ipoib.txt index 64eeb55d0c09d05f6ec5788a150ddcf2119fdfd8..f2cfe265e836e082727a4c5004d1fed264d5d526 100644 --- a/Documentation/infiniband/ipoib.txt +++ b/Documentation/infiniband/ipoib.txt @@ -24,6 +24,9 @@ Partitions and P_Keys The P_Key for any interface is given by the "pkey" file, and the main interface for a subinterface is in "parent." + Child interface create/delete can also be done using IPoIB's + rtnl_link_ops, where childs created using either way behave the same. + Datagram vs Connected modes The IPoIB driver supports two modes of operation: datagram and diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 849b771c5e03620799cbdce625e16bab7ffa275b..2152b0e7237db87a60ef4897a949974f0c2b8d2d 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -178,7 +178,6 @@ Code Seq#(hex) Include File Comments 'V' C0 linux/ivtv.h conflict! 'V' C0 media/davinci/vpfe_capture.h conflict! 'V' C0 media/si4713.h conflict! -'V' C0-CF drivers/media/video/mxb.h conflict! 'W' 00-1F linux/watchdog.h conflict! 'W' 00-1F linux/wanrouter.h conflict! 'W' 00-3F sound/asound.h conflict! @@ -204,8 +203,6 @@ Code Seq#(hex) Include File Comments 'c' A0-AF arch/x86/include/asm/msr.h conflict! 'd' 00-FF linux/char/drm/drm/h conflict! 'd' 02-40 pcmcia/ds.h conflict! -'d' 10-3F drivers/media/video/dabusb.h conflict! -'d' C0-CF drivers/media/video/saa7191.h conflict! 'd' F0-FF linux/digi1.h 'e' all linux/digi1.h conflict! 'e' 00-1F drivers/net/irda/irtty-sir.h conflict! @@ -267,9 +264,7 @@ Code Seq#(hex) Include File Comments 'v' 00-1F linux/ext2_fs.h conflict! 'v' 00-1F linux/fs.h conflict! 'v' 00-0F linux/sonypi.h conflict! -'v' C0-DF media/pwc-ioctl.h conflict! 'v' C0-FF linux/meye.h conflict! -'v' D0-DF drivers/media/video/cpia2/cpia2dev.h conflict! 'w' all CERN SCI driver 'y' 00-1F packet based user level communications diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index ab0a984530d87848435571d857b201484591f73c..ec9ae67086911efa3022b912f1a30bfeb3aea976 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -45,7 +45,7 @@ This document describes the Linux kernel Makefiles. === 7 Kbuild syntax for exported headers --- 7.1 header-y - --- 7.2 objhdr-y + --- 7.2 genhdr-y --- 7.3 destination-y --- 7.4 generic-y @@ -1282,15 +1282,15 @@ See subsequent chapter for the syntax of the Kbuild file. Subdirectories are visited before their parent directories. - --- 7.2 objhdr-y + --- 7.2 genhdr-y - objhdr-y specifies generated files to be exported. + genhdr-y specifies generated files to be exported. Generated files are special as they need to be looked up in another directory when doing 'make O=...' builds. Example: #include/linux/Kbuild - objhdr-y += version.h + genhdr-y += version.h --- 7.3 destination-y diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index ad7e2e5088c126ce48e0362d1f3296f3e8b55d2b..f777fa96243db4130771cb2dbd85e1a952ef683f 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1051,6 +1051,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted. ihash_entries= [KNL] Set number of hash buckets for inode cache. + ima_appraise= [IMA] appraise integrity measurements + Format: { "off" | "enforce" | "fix" } + default: "enforce" + + ima_appraise_tcb [IMA] + The builtin appraise policy appraises all files + owned by uid=0. + ima_audit= [IMA] Format: { "0" | "1" } 0 -- integrity auditing messages. (Default) @@ -1350,6 +1358,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted. * nohrst, nosrst, norst: suppress hard, soft and both resets. + * rstonce: only attempt one reset during + hot-unplug link recovery + * dump_id: dump IDENTIFY data. If there are multiple matching configurations changing @@ -1812,8 +1823,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. noexec=on: enable non-executable mappings (default) noexec=off: disable non-executable mappings + nosmap [X86] + Disable SMAP (Supervisor Mode Access Prevention) + even if it is supported by processor. + nosmep [X86] - Disable SMEP (Supervisor Mode Execution Protection) + Disable SMEP (Supervisor Mode Execution Prevention) even if it is supported by processor. noexec32 [X86-64] @@ -1833,6 +1848,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. and restore using xsave. The kernel will fallback to enabling legacy floating-point and sse state. + eagerfpu= [X86] + on enable eager fpu restore + off disable eager fpu restore + auto selects the default scheme, which automatically + enables eagerfpu restore for xsaveopt. + nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or wfi(ARM) instruction doesn't work correctly and not to use it. This is also useful when using JTAG debugger. @@ -2385,6 +2406,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted. rcutree.rcu_cpu_stall_timeout= [KNL,BOOT] Set timeout for RCU CPU stall warning messages. + rcutree.jiffies_till_first_fqs= [KNL,BOOT] + Set delay from grace-period initialization to + first attempt to force quiescent states. + Units are jiffies, minimum value is zero, + and maximum value is HZ. + + rcutree.jiffies_till_next_fqs= [KNL,BOOT] + Set delay between subsequent attempts to force + quiescent states. Units are jiffies, minimum + value is one, and maximum value is HZ. + rcutorture.fqs_duration= [KNL,BOOT] Set duration of force_quiescent_state bursts. @@ -2638,9 +2670,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. smart2= [HW] Format: [,[,...,]] - smp-alt-once [X86-32,SMP] On a hotplug CPU system, only - attempt to substitute SMP alternatives once at boot. - smsc-ircc2.nopnp [HW] Don't use PNP to discover SMC devices smsc-ircc2.ircc_cfg= [HW] Device configuration I/O port smsc-ircc2.ircc_sir= [HW] SIR base I/O port diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index 49578cf1aea5c34f9172db17e43bfa24a099b650..c5182bb2c16c3c2142db906e11cfc604a290f564 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -284,9 +284,11 @@ instead, it is associated with the ktype. So let us introduce struct kobj_type: struct kobj_type { - void (*release)(struct kobject *); + void (*release)(struct kobject *kobj); const struct sysfs_ops *sysfs_ops; - struct attribute **default_attrs; + struct attribute **default_attrs; + const struct kobj_ns_type_operations *(*child_ns_type)(struct kobject *kobj); + const void *(*namespace)(struct kobject *kobj); }; This structure is used to describe a particular type of kobject (or, more diff --git a/Documentation/memory.txt b/Documentation/memory.txt deleted file mode 100644 index 802efe58647c677df31bb01e943d5174205d28a3..0000000000000000000000000000000000000000 --- a/Documentation/memory.txt +++ /dev/null @@ -1,33 +0,0 @@ -There are several classic problems related to memory on Linux -systems. - - 1) There are some motherboards that will not cache above - a certain quantity of memory. If you have one of these - motherboards, your system will be SLOWER, not faster - as you add more memory. Consider exchanging your - motherboard. - -All of these problems can be addressed with the "mem=XXXM" boot option -(where XXX is the size of RAM to use in megabytes). -It can also tell Linux to use less memory than is actually installed. -If you use "mem=" on a machine with PCI, consider using "memmap=" to avoid -physical address space collisions. - -See the documentation of your boot loader (LILO, grub, loadlin, etc.) about -how to pass options to the kernel. - -There are other memory problems which Linux cannot deal with. Random -corruption of memory is usually a sign of serious hardware trouble. -Try: - - * Reducing memory settings in the BIOS to the most conservative - timings. - - * Adding a cooling fan. - - * Not overclocking your CPU. - - * Having the memory tested in a memory tester or exchanged - with the vendor. Consider testing it with memtest86 yourself. - - * Exchanging your CPU, cache, or motherboard for one that works. diff --git a/Documentation/misc-devices/lis3lv02d b/Documentation/misc-devices/lis3lv02d index f1a4ec840f86f2623ea53723286ed036532dc050..af815b9ba413afc6ba3e21beac2d613e771e0bdb 100644 --- a/Documentation/misc-devices/lis3lv02d +++ b/Documentation/misc-devices/lis3lv02d @@ -4,7 +4,8 @@ Kernel driver lis3lv02d Supported chips: * STMicroelectronics LIS3LV02DL, LIS3LV02DQ (12 bits precision) - * STMicroelectronics LIS302DL, LIS3L02DQ, LIS331DL (8 bits) + * STMicroelectronics LIS302DL, LIS3L02DQ, LIS331DL (8 bits) and + LIS331DLH (16 bits) Authors: Yan Burman diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt index 8f3ae4a6147e2c114849296e37809317671db057..a173d2a879f5cf7619b221148edbbac4789bbe8a 100644 --- a/Documentation/networking/batman-adv.txt +++ b/Documentation/networking/batman-adv.txt @@ -75,9 +75,10 @@ folder: There is a special folder for debugging information: -# ls /sys/kernel/debug/batman_adv/bat0/ -# bla_claim_table log socket transtable_local -# gateways originators transtable_global vis_data +# ls /sys/kernel/debug/batman_adv/bat0/ +# bla_backbone_table log transtable_global +# bla_claim_table originators transtable_local +# gateways socket vis_data Some of the files contain all sort of status information regard- ing the mesh network. For example, you can view the table of diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 6b1c7110534e31bb2e04acd1505a07f6dd4db481..10a015c384b844b946ae8d7b71b81abc7fd33c79 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -752,12 +752,22 @@ xmit_hash_policy protocol information to generate the hash. Uses XOR of hardware MAC addresses and IP addresses to - generate the hash. The formula is + generate the hash. The IPv4 formula is (((source IP XOR dest IP) AND 0xffff) XOR ( source MAC XOR destination MAC )) modulo slave count + The IPv6 formula is + + hash = (source ip quad 2 XOR dest IP quad 2) XOR + (source ip quad 3 XOR dest IP quad 3) XOR + (source ip quad 4 XOR dest IP quad 4) + + (((hash >> 24) XOR (hash >> 16) XOR (hash >> 8) XOR hash) + XOR (source MAC XOR destination MAC)) + modulo slave count + This algorithm will place all traffic to a particular network peer on the same slave. For non-IP traffic, the formula is the same as for the layer2 transmit @@ -778,19 +788,29 @@ xmit_hash_policy slaves, although a single connection will not span multiple slaves. - The formula for unfragmented TCP and UDP packets is + The formula for unfragmented IPv4 TCP and UDP packets is ((source port XOR dest port) XOR ((source IP XOR dest IP) AND 0xffff) modulo slave count - For fragmented TCP or UDP packets and all other IP - protocol traffic, the source and destination port + The formula for unfragmented IPv6 TCP and UDP packets is + + hash = (source port XOR dest port) XOR + ((source ip quad 2 XOR dest IP quad 2) XOR + (source ip quad 3 XOR dest IP quad 3) XOR + (source ip quad 4 XOR dest IP quad 4)) + + ((hash >> 24) XOR (hash >> 16) XOR (hash >> 8) XOR hash) + modulo slave count + + For fragmented TCP or UDP packets and all other IPv4 and + IPv6 protocol traffic, the source and destination port information is omitted. For non-IP traffic, the formula is the same as for the layer2 transmit hash policy. - This policy is intended to mimic the behavior of + The IPv4 policy is intended to mimic the behavior of certain switches, notably Cisco switches with PFC2 as well as some Foundry and IBM products. diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index ca447b35b8333106cdd19649d943d80cdb12cc1e..c7fc10724948629c98100b19250f8ee07d9dcd73 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -439,7 +439,9 @@ tcp_stdurg - BOOLEAN tcp_synack_retries - INTEGER Number of times SYNACKs for a passive TCP connection attempt will be retransmitted. Should not be higher than 255. Default value - is 5, which corresponds to ~180seconds. + is 5, which corresponds to 31seconds till the last retransmission + with the current initial RTO of 1second. With this the final timeout + for a passive TCP connection will happen after 63seconds. tcp_syncookies - BOOLEAN Only valid when the kernel was compiled with CONFIG_SYNCOOKIES @@ -465,20 +467,37 @@ tcp_syncookies - BOOLEAN tcp_fastopen - INTEGER Enable TCP Fast Open feature (draft-ietf-tcpm-fastopen) to send data in the opening SYN packet. To use this feature, the client application - must not use connect(). Instead, it should use sendmsg() or sendto() - with MSG_FASTOPEN flag which performs a TCP handshake automatically. - - The values (bitmap) are: - 1: Enables sending data in the opening SYN on the client - 5: Enables sending data in the opening SYN on the client regardless - of cookie availability. + must use sendmsg() or sendto() with MSG_FASTOPEN flag rather than + connect() to perform a TCP handshake automatically. + + The values (bitmap) are + 1: Enables sending data in the opening SYN on the client. + 2: Enables TCP Fast Open on the server side, i.e., allowing data in + a SYN packet to be accepted and passed to the application before + 3-way hand shake finishes. + 4: Send data in the opening SYN regardless of cookie availability and + without a cookie option. + 0x100: Accept SYN data w/o validating the cookie. + 0x200: Accept data-in-SYN w/o any cookie option present. + 0x400/0x800: Enable Fast Open on all listeners regardless of the + TCP_FASTOPEN socket option. The two different flags designate two + different ways of setting max_qlen without the TCP_FASTOPEN socket + option. Default: 0 + Note that the client & server side Fast Open flags (1 and 2 + respectively) must be also enabled before the rest of flags can take + effect. + + See include/net/tcp.h and the code for more details. + tcp_syn_retries - INTEGER Number of times initial SYNs for an active TCP connection attempt will be retransmitted. Should not be higher than 255. Default value - is 5, which corresponds to ~180seconds. + is 6, which corresponds to 63seconds till the last restransmission + with the current initial RTO of 1second. With this the final timeout + for an active TCP connection attempt will happen after 127seconds. tcp_timestamps - BOOLEAN Enable timestamps as defined in RFC1323. diff --git a/Documentation/networking/netconsole.txt b/Documentation/networking/netconsole.txt index 8d022073e3ef53933898c6756c3abf6d50104a79..2e9e0ae2cd453dc3ac0a605c1a40baf1096cf42f 100644 --- a/Documentation/networking/netconsole.txt +++ b/Documentation/networking/netconsole.txt @@ -51,8 +51,23 @@ Built-in netconsole starts immediately after the TCP stack is initialized and attempts to bring up the supplied dev at the supplied address. -The remote host can run either 'netcat -u -l -p ', -'nc -l -u ' or syslogd. +The remote host has several options to receive the kernel messages, +for example: + +1) syslogd + +2) netcat + + On distributions using a BSD-based netcat version (e.g. Fedora, + openSUSE and Ubuntu) the listening port must be specified without + the -p switch: + + 'nc -u -l -p ' / 'nc -u -l ' or + 'netcat -u -l -p ' / 'netcat -u -l ' + +3) socat + + 'socat udp-recv: -' Dynamic reconfiguration: ======================== diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt index c676b9cedbd0d90a802ce82c09e49a219560570c..ef9ee71b4d7fcc71a38dc94454828e74a606cded 100644 --- a/Documentation/networking/stmmac.txt +++ b/Documentation/networking/stmmac.txt @@ -173,7 +173,6 @@ Where: For MDIO bus The we have: struct stmmac_mdio_bus_data { - int bus_id; int (*phy_reset)(void *priv); unsigned int phy_mask; int *irqs; @@ -181,7 +180,6 @@ For MDIO bus The we have: }; Where: - o bus_id: bus identifier; o phy_reset: hook to reset the phy device attached to the bus. o phy_mask: phy mask passed when register the MDIO bus within the driver. o irqs: list of IRQs, one per PHY. @@ -230,9 +228,6 @@ there are two MAC cores: one MAC is for MDIO Bus/PHY emulation with fixed_link support. static struct stmmac_mdio_bus_data stmmac1_mdio_bus = { - .bus_id = 1, - | - |-> phy device on the bus_id 1 .phy_reset = phy_reset; | |-> function to provide the phy_reset on this board diff --git a/Documentation/networking/vxlan.txt b/Documentation/networking/vxlan.txt new file mode 100644 index 0000000000000000000000000000000000000000..5b34b762d7d5139a8cf0a9a8eacf739cae279a5b --- /dev/null +++ b/Documentation/networking/vxlan.txt @@ -0,0 +1,47 @@ +Virtual eXtensible Local Area Networking documentation +====================================================== + +The VXLAN protocol is a tunnelling protocol that is designed to +solve the problem of limited number of available VLAN's (4096). +With VXLAN identifier is expanded to 24 bits. + +It is a draft RFC standard, that is implemented by Cisco Nexus, +Vmware and Brocade. The protocol runs over UDP using a single +destination port (still not standardized by IANA). +This document describes the Linux kernel tunnel device, +there is also an implantation of VXLAN for Openvswitch. + +Unlike most tunnels, a VXLAN is a 1 to N network, not just point +to point. A VXLAN device can either dynamically learn the IP address +of the other end, in a manner similar to a learning bridge, or the +forwarding entries can be configured statically. + +The management of vxlan is done in a similar fashion to it's +too closest neighbors GRE and VLAN. Configuring VXLAN requires +the version of iproute2 that matches the kernel release +where VXLAN was first merged upstream. + +1. Create vxlan device + # ip li add vxlan0 type vxlan id 42 group 239.1.1.1 dev eth1 + +This creates a new device (vxlan0). The device uses the +the multicast group 239.1.1.1 over eth1 to handle packets where +no entry is in the forwarding table. + +2. Delete vxlan device + # ip link delete vxlan0 + +3. Show vxlan info + # ip -d show vxlan0 + +It is possible to create, destroy and display the vxlan +forwarding table using the new bridge command. + +1. Create forwarding table entry + # bridge fdb add to 00:17:42:8a:b4:05 dst 192.19.0.2 dev vxlan0 + +2. Delete forwarding table entry + # bridge fdb delete 00:17:42:8a:b4:05 + +3. Show forwarding table + # bridge fdb show dev vxlan0 diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index e40f4b4e1977c73d1f6984c705c1065878ad4ad4..3b4ee5328868cea31b024ad9631a286886826c60 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -289,6 +289,11 @@ Interaction with the GPIO subsystem The GPIO drivers may want to perform operations of various types on the same physical pins that are also registered as pin controller pins. +First and foremost, the two subsystems can be used as completely orthogonal, +see the section named "pin control requests from drivers" and +"drivers needing both pin control and GPIOs" below for details. But in some +situations a cross-subsystem mapping between pins and GPIOs is needed. + Since the pin controller subsystem have its pinspace local to the pin controller we need a mapping so that the pin control subsystem can figure out which pin controller handles control of a certain GPIO pin. Since a single @@ -359,6 +364,7 @@ will get an pin number into its handled number range. Further it is also passed the range ID value, so that the pin controller knows which range it should deal with. + PINMUX interfaces ================= @@ -840,9 +846,9 @@ static unsigned long i2c_pin_configs[] = { static struct pinctrl_map __initdata mapping[] = { PIN_MAP_MUX_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", "i2c0"), - PIN_MAP_MUX_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs), - PIN_MAP_MUX_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs), - PIN_MAP_MUX_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0sda", i2c_pin_configs), + PIN_MAP_CONFIGS_GROUP("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0", i2c_grp_configs), + PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0scl", i2c_pin_configs), + PIN_MAP_CONFIGS_PIN("foo-i2c.0", PINCTRL_STATE_DEFAULT, "pinctrl-foo", "i2c0sda", i2c_pin_configs), }; Finally, some devices expect the mapping table to contain certain specific @@ -960,8 +966,8 @@ all get selected, and they all get enabled and disable simultaneously by the pinmux core. -Pinmux requests from drivers -============================ +Pin control requests from drivers +================================= Generally it is discouraged to let individual drivers get and enable pin control. So if possible, handle the pin control in platform code or some other @@ -969,6 +975,11 @@ place where you have access to all the affected struct device * pointers. In some cases where a driver needs to e.g. switch between different mux mappings at runtime this is not possible. +A typical case is if a driver needs to switch bias of pins from normal +operation and going to sleep, moving from the PINCTRL_STATE_DEFAULT to +PINCTRL_STATE_SLEEP at runtime, re-biasing or even re-muxing pins to save +current in sleep mode. + A driver may request a certain control state to be activated, usually just the default state like this: @@ -1058,6 +1069,51 @@ registered. Thus make sure that the error path in your driver gracefully cleans up and is ready to retry the probing later in the startup process. +Drivers needing both pin control and GPIOs +========================================== + +Again, it is discouraged to let drivers lookup and select pin control states +themselves, but again sometimes this is unavoidable. + +So say that your driver is fetching its resources like this: + +#include +#include + +struct pinctrl *pinctrl; +int gpio; + +pinctrl = devm_pinctrl_get_select_default(&dev); +gpio = devm_gpio_request(&dev, 14, "foo"); + +Here we first request a certain pin state and then request GPIO 14 to be +used. If you're using the subsystems orthogonally like this, you should +nominally always get your pinctrl handle and select the desired pinctrl +state BEFORE requesting the GPIO. This is a semantic convention to avoid +situations that can be electrically unpleasant, you will certainly want to +mux in and bias pins in a certain way before the GPIO subsystems starts to +deal with them. + +The above can be hidden: using pinctrl hogs, the pin control driver may be +setting up the config and muxing for the pins when it is probing, +nevertheless orthogonal to the GPIO subsystem. + +But there are also situations where it makes sense for the GPIO subsystem +to communicate directly with with the pinctrl subsystem, using the latter +as a back-end. This is when the GPIO driver may call out to the functions +described in the section "Pin control interaction with the GPIO subsystem" +above. This only involves per-pin multiplexing, and will be completely +hidden behind the gpio_*() function namespace. In this case, the driver +need not interact with the pin control subsystem at all. + +If a pin control driver and a GPIO driver is dealing with the same pins +and the use cases involve multiplexing, you MUST implement the pin controller +as a back-end for the GPIO driver like this, unless your hardware design +is such that the GPIO controller can override the pin controller's +multiplexing state through hardware without the need to interact with the +pin control system. + + System pin control hogging ========================== diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index 2f0ddc15b5ac3621a4caaa7933cfbc656b47016b..9c647bd7c5a9cf108746647b8f97ec4b70afe1ab 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -81,6 +81,9 @@ This defines trickle and fast charges. For batteries that are already charged or discharging, 'n/a' can be displayed (or 'unknown', if the status is not known). +AUTHENTIC - indicates the power supply (battery or charger) connected +to the platform is authentic(1) or non authentic(0). + HEALTH - represents health of the battery, values corresponds to POWER_SUPPLY_HEALTH_*, defined in battery.h. @@ -113,8 +116,12 @@ be negative; there is no empty or full value. It is only useful for relative, time-based measurements. CONSTANT_CHARGE_CURRENT - constant charge current programmed by charger. +CONSTANT_CHARGE_CURRENT_MAX - maximum charge current supported by the +power supply object. CONSTANT_CHARGE_VOLTAGE - constant charge voltage programmed by charger. +CONSTANT_CHARGE_VOLTAGE_MAX - maximum charge voltage supported by the +power supply object. ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index 92341b84250dfaf137b89376c115597a4bd9c222..0b4b63e7e9b63053d3b44a827a803f4314af9527 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -53,7 +53,7 @@ before suspend (it is limited to 500 MB by default). Article about goals and implementation of Software Suspend for Linux ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ -Author: G‚ábor Kuti +Author: Gábor Kuti Last revised: 2003-10-20 by Pavel Machek Idea and goals to achieve diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 7561d7ed8e11ef25a9a1fb479492148b6f038d5d..8ffb274367c7a4867b1930c9c5bd60ff475bfffb 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -69,6 +69,7 @@ MAC/FDDI addresses: %pMR 05:04:03:02:01:00 %pMF 00-01-02-03-04-05 %pm 000102030405 + %pmR 050403020100 For printing 6-byte MAC/FDDI addresses in hex notation. The 'M' and 'm' specifiers result in a printed address with ('M') or without ('m') byte diff --git a/Documentation/prio_tree.txt b/Documentation/prio_tree.txt deleted file mode 100644 index 3aa68f9a117b19cac846aabd769d53d46f657e82..0000000000000000000000000000000000000000 --- a/Documentation/prio_tree.txt +++ /dev/null @@ -1,107 +0,0 @@ -The prio_tree.c code indexes vmas using 3 different indexes: - * heap_index = vm_pgoff + vm_size_in_pages : end_vm_pgoff - * radix_index = vm_pgoff : start_vm_pgoff - * size_index = vm_size_in_pages - -A regular radix-priority-search-tree indexes vmas using only heap_index and -radix_index. The conditions for indexing are: - * ->heap_index >= ->left->heap_index && - ->heap_index >= ->right->heap_index - * if (->heap_index == ->left->heap_index) - then ->radix_index < ->left->radix_index; - * if (->heap_index == ->right->heap_index) - then ->radix_index < ->right->radix_index; - * nodes are hashed to left or right subtree using radix_index - similar to a pure binary radix tree. - -A regular radix-priority-search-tree helps to store and query -intervals (vmas). However, a regular radix-priority-search-tree is only -suitable for storing vmas with different radix indices (vm_pgoff). - -Therefore, the prio_tree.c extends the regular radix-priority-search-tree -to handle many vmas with the same vm_pgoff. Such vmas are handled in -2 different ways: 1) All vmas with the same radix _and_ heap indices are -linked using vm_set.list, 2) if there are many vmas with the same radix -index, but different heap indices and if the regular radix-priority-search -tree cannot index them all, we build an overflow-sub-tree that indexes such -vmas using heap and size indices instead of heap and radix indices. For -example, in the figure below some vmas with vm_pgoff = 0 (zero) are -indexed by regular radix-priority-search-tree whereas others are pushed -into an overflow-subtree. Note that all vmas in an overflow-sub-tree have -the same vm_pgoff (radix_index) and if necessary we build different -overflow-sub-trees to handle each possible radix_index. For example, -in figure we have 3 overflow-sub-trees corresponding to radix indices -0, 2, and 4. - -In the final tree the first few (prio_tree_root->index_bits) levels -are indexed using heap and radix indices whereas the overflow-sub-trees below -those levels (i.e. levels prio_tree_root->index_bits + 1 and higher) are -indexed using heap and size indices. In overflow-sub-trees the size_index -is used for hashing the nodes to appropriate places. - -Now, an example prio_tree: - - vmas are represented [radix_index, size_index, heap_index] - i.e., [start_vm_pgoff, vm_size_in_pages, end_vm_pgoff] - -level prio_tree_root->index_bits = 3 ------ - _ - 0 [0,7,7] | - / \ | - ------------------ ------------ | Regular - / \ | radix priority - 1 [1,6,7] [4,3,7] | search tree - / \ / \ | - ------- ----- ------ ----- | heap-and-radix - / \ / \ | indexed - 2 [0,6,6] [2,5,7] [5,2,7] [6,1,7] | - / \ / \ / \ / \ | - 3 [0,5,5] [1,5,6] [2,4,6] [3,4,7] [4,2,6] [5,1,6] [6,0,6] [7,0,7] | - / / / _ - / / / _ - 4 [0,4,4] [2,3,5] [4,1,5] | - / / / | - 5 [0,3,3] [2,2,4] [4,0,4] | Overflow-sub-trees - / / | - 6 [0,2,2] [2,1,3] | heap-and-size - / / | indexed - 7 [0,1,1] [2,0,2] | - / | - 8 [0,0,0] | - _ - -Note that we use prio_tree_root->index_bits to optimize the height -of the heap-and-radix indexed tree. Since prio_tree_root->index_bits is -set according to the maximum end_vm_pgoff mapped, we are sure that all -bits (in vm_pgoff) above prio_tree_root->index_bits are 0 (zero). Therefore, -we only use the first prio_tree_root->index_bits as radix_index. -Whenever index_bits is increased in prio_tree_expand, we shuffle the tree -to make sure that the first prio_tree_root->index_bits levels of the tree -is indexed properly using heap and radix indices. - -We do not optimize the height of overflow-sub-trees using index_bits. -The reason is: there can be many such overflow-sub-trees and all of -them have to be suffled whenever the index_bits increases. This may involve -walking the whole prio_tree in prio_tree_insert->prio_tree_expand code -path which is not desirable. Hence, we do not optimize the height of the -heap-and-size indexed overflow-sub-trees using prio_tree->index_bits. -Instead the overflow sub-trees are indexed using full BITS_PER_LONG bits -of size_index. This may lead to skewed sub-trees because most of the -higher significant bits of the size_index are likely to be 0 (zero). In -the example above, all 3 overflow-sub-trees are skewed. This may marginally -affect the performance. However, processes rarely map many vmas with the -same start_vm_pgoff but different end_vm_pgoffs. Therefore, we normally -do not require overflow-sub-trees to index all vmas. - -From the above discussion it is clear that the maximum height of -a prio_tree can be prio_tree_root->index_bits + BITS_PER_LONG. -However, in most of the common cases we do not need overflow-sub-trees, -so the tree height in the common cases will be prio_tree_root->index_bits. - -It is fair to mention here that the prio_tree_root->index_bits -is increased on demand, however, the index_bits is not decreased when -vmas are removed from the prio_tree. That's tricky to do. Hence, it's -left as a home work problem. - - diff --git a/Documentation/ramoops.txt b/Documentation/ramoops.txt index 197ad59ab9bf71cbcfbec783680105967ead06a7..69b3cac4749d76811be9c39a6e3605023a7639fd 100644 --- a/Documentation/ramoops.txt +++ b/Documentation/ramoops.txt @@ -102,9 +102,7 @@ related hangs. The functions call chain log is stored in a "ftrace-ramoops" file. Here is an example of usage: # mount -t debugfs debugfs /sys/kernel/debug/ - # cd /sys/kernel/debug/tracing - # echo function > current_tracer - # echo 1 > options/func_pstore + # echo 1 > /sys/kernel/debug/pstore/record_ftrace # reboot -f [...] # mount -t pstore pstore /mnt/ diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt index 8d32d85a523439381273879f363163370bab7a25..61b6c48871a0163a12e4faec50064f61c819b5c6 100644 --- a/Documentation/rbtree.txt +++ b/Documentation/rbtree.txt @@ -193,24 +193,55 @@ Example: Support for Augmented rbtrees ----------------------------- -Augmented rbtree is an rbtree with "some" additional data stored in each node. -This data can be used to augment some new functionality to rbtree. -Augmented rbtree is an optional feature built on top of basic rbtree -infrastructure. An rbtree user who wants this feature will have to call the -augmentation functions with the user provided augmentation callback -when inserting and erasing nodes. - -On insertion, the user must call rb_augment_insert() once the new node is in -place. This will cause the augmentation function callback to be called for -each node between the new node and the root which has been affected by the -insertion. - -When erasing a node, the user must call rb_augment_erase_begin() first to -retrieve the deepest node on the rebalance path. Then, after erasing the -original node, the user must call rb_augment_erase_end() with the deepest -node found earlier. This will cause the augmentation function to be called -for each affected node between the deepest node and the root. - +Augmented rbtree is an rbtree with "some" additional data stored in +each node, where the additional data for node N must be a function of +the contents of all nodes in the subtree rooted at N. This data can +be used to augment some new functionality to rbtree. Augmented rbtree +is an optional feature built on top of basic rbtree infrastructure. +An rbtree user who wants this feature will have to call the augmentation +functions with the user provided augmentation callback when inserting +and erasing nodes. + +C files implementing augmented rbtree manipulation must include + instead of . Note that +linux/rbtree_augmented.h exposes some rbtree implementations details +you are not expected to rely on; please stick to the documented APIs +there and do not include from header files +either so as to minimize chances of your users accidentally relying on +such implementation details. + +On insertion, the user must update the augmented information on the path +leading to the inserted node, then call rb_link_node() as usual and +rb_augment_inserted() instead of the usual rb_insert_color() call. +If rb_augment_inserted() rebalances the rbtree, it will callback into +a user provided function to update the augmented information on the +affected subtrees. + +When erasing a node, the user must call rb_erase_augmented() instead of +rb_erase(). rb_erase_augmented() calls back into user provided functions +to updated the augmented information on affected subtrees. + +In both cases, the callbacks are provided through struct rb_augment_callbacks. +3 callbacks must be defined: + +- A propagation callback, which updates the augmented value for a given + node and its ancestors, up to a given stop point (or NULL to update + all the way to the root). + +- A copy callback, which copies the augmented value for a given subtree + to a newly assigned subtree root. + +- A tree rotation callback, which copies the augmented value for a given + subtree to a newly assigned subtree root AND recomputes the augmented + information for the former subtree root. + +The compiled code for rb_erase_augmented() may inline the propagation and +copy callbacks, which results in a large function, so each augmented rbtree +user should have a single rb_erase_augmented() call site in order to limit +compiled code size. + + +Sample usage: Interval tree is an example of augmented rb tree. Reference - "Introduction to Algorithms" by Cormen, Leiserson, Rivest and Stein. @@ -230,26 +261,132 @@ and its immediate children. And this will be used in O(log n) lookup for lowest match (lowest start address among all possible matches) with something like: -find_lowest_match(lo, hi, node) +struct interval_tree_node * +interval_tree_first_match(struct rb_root *root, + unsigned long start, unsigned long last) { - lowest_match = NULL; - while (node) { - if (max_hi(node->left) > lo) { - // Lowest overlap if any must be on left side - node = node->left; - } else if (overlap(lo, hi, node)) { - lowest_match = node; - break; - } else if (lo > node->lo) { - // Lowest overlap if any must be on right side - node = node->right; - } else { - break; + struct interval_tree_node *node; + + if (!root->rb_node) + return NULL; + node = rb_entry(root->rb_node, struct interval_tree_node, rb); + + while (true) { + if (node->rb.rb_left) { + struct interval_tree_node *left = + rb_entry(node->rb.rb_left, + struct interval_tree_node, rb); + if (left->__subtree_last >= start) { + /* + * Some nodes in left subtree satisfy Cond2. + * Iterate to find the leftmost such node N. + * If it also satisfies Cond1, that's the match + * we are looking for. Otherwise, there is no + * matching interval as nodes to the right of N + * can't satisfy Cond1 either. + */ + node = left; + continue; + } } + if (node->start <= last) { /* Cond1 */ + if (node->last >= start) /* Cond2 */ + return node; /* node is leftmost match */ + if (node->rb.rb_right) { + node = rb_entry(node->rb.rb_right, + struct interval_tree_node, rb); + if (node->__subtree_last >= start) + continue; + } + } + return NULL; /* No match */ + } +} + +Insertion/removal are defined using the following augmented callbacks: + +static inline unsigned long +compute_subtree_last(struct interval_tree_node *node) +{ + unsigned long max = node->last, subtree_last; + if (node->rb.rb_left) { + subtree_last = rb_entry(node->rb.rb_left, + struct interval_tree_node, rb)->__subtree_last; + if (max < subtree_last) + max = subtree_last; + } + if (node->rb.rb_right) { + subtree_last = rb_entry(node->rb.rb_right, + struct interval_tree_node, rb)->__subtree_last; + if (max < subtree_last) + max = subtree_last; + } + return max; +} + +static void augment_propagate(struct rb_node *rb, struct rb_node *stop) +{ + while (rb != stop) { + struct interval_tree_node *node = + rb_entry(rb, struct interval_tree_node, rb); + unsigned long subtree_last = compute_subtree_last(node); + if (node->__subtree_last == subtree_last) + break; + node->__subtree_last = subtree_last; + rb = rb_parent(&node->rb); } - return lowest_match; } -Finding exact match will be to first find lowest match and then to follow -successor nodes looking for exact match, until the start of a node is beyond -the hi value we are looking for. +static void augment_copy(struct rb_node *rb_old, struct rb_node *rb_new) +{ + struct interval_tree_node *old = + rb_entry(rb_old, struct interval_tree_node, rb); + struct interval_tree_node *new = + rb_entry(rb_new, struct interval_tree_node, rb); + + new->__subtree_last = old->__subtree_last; +} + +static void augment_rotate(struct rb_node *rb_old, struct rb_node *rb_new) +{ + struct interval_tree_node *old = + rb_entry(rb_old, struct interval_tree_node, rb); + struct interval_tree_node *new = + rb_entry(rb_new, struct interval_tree_node, rb); + + new->__subtree_last = old->__subtree_last; + old->__subtree_last = compute_subtree_last(old); +} + +static const struct rb_augment_callbacks augment_callbacks = { + augment_propagate, augment_copy, augment_rotate +}; + +void interval_tree_insert(struct interval_tree_node *node, + struct rb_root *root) +{ + struct rb_node **link = &root->rb_node, *rb_parent = NULL; + unsigned long start = node->start, last = node->last; + struct interval_tree_node *parent; + + while (*link) { + rb_parent = *link; + parent = rb_entry(rb_parent, struct interval_tree_node, rb); + if (parent->__subtree_last < last) + parent->__subtree_last = last; + if (start < parent->start) + link = &parent->rb.rb_left; + else + link = &parent->rb.rb_right; + } + + node->__subtree_last = last; + rb_link_node(&node->rb, rb_parent, link); + rb_insert_augmented(&node->rb, root, &augment_callbacks); +} + +void interval_tree_remove(struct interval_tree_node *node, + struct rb_root *root) +{ + rb_erase_augmented(&node->rb, root, &augment_callbacks); +} diff --git a/Documentation/remoteproc.txt b/Documentation/remoteproc.txt index 23a09b884bc76398a6a82bb68933dcba84b4231a..e6469fdcf89a0344b017f90c821019750d8e9039 100644 --- a/Documentation/remoteproc.txt +++ b/Documentation/remoteproc.txt @@ -129,6 +129,13 @@ int dummy_rproc_example(struct rproc *my_rproc) Returns 0 on success and -EINVAL if @rproc isn't valid. + void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type) + - Report a crash in a remoteproc + This function must be called every time a crash is detected by the + platform specific rproc implementation. This should not be called from a + non-remoteproc driver. This function can be called from atomic/interrupt + context. + 5. Implementation callbacks These callbacks should be provided by platform-specific remoteproc diff --git a/Documentation/rtc.txt b/Documentation/rtc.txt index 250160469d83e65c3a5235ee7b00b83b40abb68d..32aa4002de4a9fbd9fe64045119f811df47886ae 100644 --- a/Documentation/rtc.txt +++ b/Documentation/rtc.txt @@ -119,8 +119,9 @@ three different userspace interfaces: * /sys/class/rtc/rtcN ... sysfs attributes support readonly access to some RTC attributes. - * /proc/driver/rtc ... the first RTC (rtc0) may expose itself - using a procfs interface. More information is (currently) shown + * /proc/driver/rtc ... the system clock RTC may expose itself + using a procfs interface. If there is no RTC for the system clock, + rtc0 is used by default. More information is (currently) shown here than through sysfs. The RTC Class framework supports a wide variety of RTCs, ranging from those diff --git a/Documentation/scheduler/sched-arch.txt b/Documentation/scheduler/sched-arch.txt index 28aa1075e291c40e832db64a113e8328ff6b2a06..b1b8587b86f0cc8153c2cedda5a3308f980828aa 100644 --- a/Documentation/scheduler/sched-arch.txt +++ b/Documentation/scheduler/sched-arch.txt @@ -17,16 +17,6 @@ you must `#define __ARCH_WANT_UNLOCKED_CTXSW` in a header file Unlocked context switches introduce only a very minor performance penalty to the core scheduler implementation in the CONFIG_SMP case. -2. Interrupt status -By default, the switch_to arch function is called with interrupts -disabled. Interrupts may be enabled over the call if it is likely to -introduce a significant interrupt latency by adding the line -`#define __ARCH_WANT_INTERRUPTS_ON_CTXSW` in the same place as for -unlocked context switches. This define also implies -`__ARCH_WANT_UNLOCKED_CTXSW`. See arch/arm/include/asm/system.h for an -example. - - CPU idle ======== Your cpu_idle routines need to obey the following rules: diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 80441ab608e4f04f530119db621ec9e7941545ac..3a3079411a3dc953c59cb75b8391906b2fb74df3 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -1,3 +1,13 @@ +Release Date : Tue. Jun 17, 2012 17:00:00 PST 2012 - + (emaild-id:megaraidlinux@lsi.com) + Adam Radford/Kashyap Desai +Current Version : 00.00.06.18-rc1 +Old Version : 00.00.06.15-rc1 + 1. Fix Copyright dates. + 2. Add throttlequeuedepth module parameter. + 3. Add resetwaittime module parameter. + 4. Move poll_aen_lock initializer. +------------------------------------------------------------------------------- Release Date : Mon. Mar 19, 2012 17:00:00 PST 2012 - (emaild-id:megaraidlinux@lsi.com) Adam Radford diff --git a/Documentation/scsi/LICENSE.qla2xxx b/Documentation/scsi/LICENSE.qla2xxx index ce0fdf349a8159b8f68c0b110567578d9503514f..27a91cf43d6d66ce4137e9335988175b096423a4 100644 --- a/Documentation/scsi/LICENSE.qla2xxx +++ b/Documentation/scsi/LICENSE.qla2xxx @@ -1,4 +1,4 @@ -Copyright (c) 2003-2011 QLogic Corporation +Copyright (c) 2003-2012 QLogic Corporation QLogic Linux FC-FCoE Driver This program includes a device driver for Linux 3.x. diff --git a/Documentation/scsi/LICENSE.qla4xxx b/Documentation/scsi/LICENSE.qla4xxx index ab899591ecb7a93dfe6c8b936042c3b8f400bd42..78c169f0d7c6b5ac0988195bb10d47446993ce4f 100644 --- a/Documentation/scsi/LICENSE.qla4xxx +++ b/Documentation/scsi/LICENSE.qla4xxx @@ -1,4 +1,4 @@ -Copyright (c) 2003-2011 QLogic Corporation +Copyright (c) 2003-2012 QLogic Corporation QLogic Linux iSCSI Driver This program includes a device driver for Linux 3.x. diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt index 685bf3582abe6104f367a76d48e03c5185bce911..f346abbdd6ff3a7aa16acb197e4dbe7b57d469ea 100644 --- a/Documentation/scsi/st.txt +++ b/Documentation/scsi/st.txt @@ -112,10 +112,8 @@ attempted). MINOR NUMBERS -The tape driver currently supports 128 drives by default. This number -can be increased by editing st.h and recompiling the driver if -necessary. The upper limit is 2^17 drives if 4 modes for each drive -are used. +The tape driver currently supports up to 2^17 drives if 4 modes for +each drive are used. The minor numbers consist of the following bit fields: diff --git a/Documentation/security/Smack.txt b/Documentation/security/Smack.txt index a416479b8a1c23d6755cd5354027159af832a4dc..8a177e4b6e21237e0e03f0410acb70d9282ce014 100644 --- a/Documentation/security/Smack.txt +++ b/Documentation/security/Smack.txt @@ -28,12 +28,11 @@ Smack kernels use the CIPSO IP option. Some network configurations are intolerant of IP options and can impede access to systems that use them as Smack does. -The current git repositories for Smack user space are: +The current git repository for Smack user space is: - git@gitorious.org:meego-platform-security/smackutil.git - git@gitorious.org:meego-platform-security/libsmack.git + git://github.com/smack-team/smack.git -These should make and install on most modern distributions. +This should make and install on most modern distributions. There are three commands included in smackutil: smackload - properly formats data for writing to /smack/load @@ -194,6 +193,9 @@ onlycap these capabilities are effective at for processes with any label. The value is set by writing the desired label to the file or cleared by writing "-" to the file. +revoke-subject + Writing a Smack label here sets the access to '-' for all access + rules with that subject label. You can add access rules in /etc/smack/accesses. They take the form: diff --git a/Documentation/serial/00-INDEX b/Documentation/serial/00-INDEX index e09468ad3cb16f97f4ef3075b5f743dd258fb01b..f7b0c7dc25ef283cc3fe689a4c6f4124c1114e70 100644 --- a/Documentation/serial/00-INDEX +++ b/Documentation/serial/00-INDEX @@ -2,8 +2,6 @@ - this file. README.cycladesZ - info on Cyclades-Z firmware loading. -computone.txt - - info on Computone Intelliport II/Plus Multiport Serial Driver. digiepca.txt - info on Digi Intl. {PC,PCI,EISA}Xx and Xem series cards. hayes-esp.txt diff --git a/Documentation/serial/computone.txt b/Documentation/serial/computone.txt deleted file mode 100644 index a6a1158ea2ba9839e64b84bfa94ee4e960da90d9..0000000000000000000000000000000000000000 --- a/Documentation/serial/computone.txt +++ /dev/null @@ -1,520 +0,0 @@ -NOTE: This is an unmaintained driver. It is not guaranteed to work due to -changes made in the tty layer in 2.6. If you wish to take over maintenance of -this driver, contact Michael Warfield . - -Changelog: ----------- -11-01-2001: Original Document - -10-29-2004: Minor misspelling & format fix, update status of driver. - James Nelson - -Computone Intelliport II/Plus Multiport Serial Driver ------------------------------------------------------ - -Release Notes For Linux Kernel 2.2 and higher. -These notes are for the drivers which have already been integrated into the -kernel and have been tested on Linux kernels 2.0, 2.2, 2.3, and 2.4. - -Version: 1.2.14 -Date: 11/01/2001 -Historical Author: Andrew Manison -Primary Author: Doug McNash - -This file assumes that you are using the Computone drivers which are -integrated into the kernel sources. For updating the drivers or installing -drivers into kernels which do not already have Computone drivers, please -refer to the instructions in the README.computone file in the driver patch. - - -1. INTRODUCTION - -This driver supports the entire family of Intelliport II/Plus controllers -with the exception of the MicroChannel controllers. It does not support -products previous to the Intelliport II. - -This driver was developed on the v2.0.x Linux tree and has been tested up -to v2.4.14; it will probably not work with earlier v1.X kernels,. - - -2. QUICK INSTALLATION - -Hardware - If you have an ISA card, find a free interrupt and io port. - List those in use with `cat /proc/interrupts` and - `cat /proc/ioports`. Set the card dip switches to a free - address. You may need to configure your BIOS to reserve an - irq for an ISA card. PCI and EISA parameters are set - automagically. Insert card into computer with the power off - before or after drivers installation. - - Note the hardware address from the Computone ISA cards installed into - the system. These are required for editing ip2.c or editing - /etc/modprobe.d/*.conf, or for specification on the modprobe - command line. - - Note that the /etc/modules.conf should be used for older (pre-2.6) - kernels. - -Software - - -Module installation: - -a) Determine free irq/address to use if any (configure BIOS if need be) -b) Run "make config" or "make menuconfig" or "make xconfig" - Select (m) module for CONFIG_COMPUTONE under character - devices. CONFIG_PCI and CONFIG_MODULES also may need to be set. -c) Set address on ISA cards then: - edit /usr/src/linux/drivers/char/ip2.c if needed - or - edit config file in /etc/modprobe.d/ if needed (module). - or both to match this setting. -d) Run "make modules" -e) Run "make modules_install" -f) Run "/sbin/depmod -a" -g) install driver using `modprobe ip2 ` (options listed below) -h) run ip2mkdev (either the script below or the binary version) - - -Kernel installation: - -a) Determine free irq/address to use if any (configure BIOS if need be) -b) Run "make config" or "make menuconfig" or "make xconfig" - Select (y) kernel for CONFIG_COMPUTONE under character - devices. CONFIG_PCI may need to be set if you have PCI bus. -c) Set address on ISA cards then: - edit /usr/src/linux/drivers/char/ip2.c - (Optional - may be specified on kernel command line now) -d) Run "make zImage" or whatever target you prefer. -e) mv /usr/src/linux/arch/x86/boot/zImage to /boot. -f) Add new config for this kernel into /etc/lilo.conf, run "lilo" - or copy to a floppy disk and boot from that floppy disk. -g) Reboot using this kernel -h) run ip2mkdev (either the script below or the binary version) - -Kernel command line options: - -When compiling the driver into the kernel, io and irq may be -compiled into the driver by editing ip2.c and setting the values for -io and irq in the appropriate array. An alternative is to specify -a command line parameter to the kernel at boot up. - - ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 - -Note that this order is very different from the specifications for the -modload parameters which have separate IRQ and IO specifiers. - -The io port also selects PCI (1) and EISA (2) boards. - - io=0 No board - io=1 PCI board - io=2 EISA board - else ISA board io address - -You only need to specify the boards which are present. - - Examples: - - 2 PCI boards: - - ip2=1,0,1,0 - - 1 ISA board at 0x310 irq 5: - - ip2=0x310,5 - -This can be added to and "append" option in lilo.conf similar to this: - - append="ip2=1,0,1,0" - - -3. INSTALLATION - -Previously, the driver sources were packaged with a set of patch files -to update the character drivers' makefile and configuration file, and other -kernel source files. A build script (ip2build) was included which applies -the patches if needed, and build any utilities needed. -What you receive may be a single patch file in conventional kernel -patch format build script. That form can also be applied by -running patch -p1 < ThePatchFile. Otherwise run ip2build. - -The driver can be installed as a module (recommended) or built into the -kernel. This is selected as for other drivers through the `make config` -command from the root of the Linux source tree. If the driver is built -into the kernel you will need to edit the file ip2.c to match the boards -you are installing. See that file for instructions. If the driver is -installed as a module the configuration can also be specified on the -modprobe command line as follows: - - modprobe ip2 irq=irq1,irq2,irq3,irq4 io=addr1,addr2,addr3,addr4 - -where irqnum is one of the valid Intelliport II interrupts (3,4,5,7,10,11, -12,15) and addr1-4 are the base addresses for up to four controllers. If -the irqs are not specified the driver uses the default in ip2.c (which -selects polled mode). If no base addresses are specified the defaults in -ip2.c are used. If you are autoloading the driver module with kerneld or -kmod the base addresses and interrupt number must also be set in ip2.c -and recompile or just insert and options line in /etc/modprobe.d/*.conf or both. -The options line is equivalent to the command line and takes precedence over -what is in ip2.c. - -config sample to put /etc/modprobe.d/*.conf: - options ip2 io=1,0x328 irq=1,10 - alias char-major-71 ip2 - alias char-major-72 ip2 - alias char-major-73 ip2 - -The equivalent in ip2.c: - -static int io[IP2_MAX_BOARDS]= { 1, 0x328, 0, 0 }; -static int irq[IP2_MAX_BOARDS] = { 1, 10, -1, -1 }; - -The equivalent for the kernel command line (in lilo.conf): - - append="ip2=1,1,0x328,10" - - -Note: Both io and irq should be updated to reflect YOUR system. An "io" - address of 1 or 2 indicates a PCI or EISA card in the board table. - The PCI or EISA irq will be assigned automatically. - -Specifying an invalid or in-use irq will default the driver into -running in polled mode for that card. If all irq entries are 0 then -all cards will operate in polled mode. - -If you select the driver as part of the kernel run : - - make zlilo (or whatever you do to create a bootable kernel) - -If you selected a module run : - - make modules && make modules_install - -The utility ip2mkdev (see 5 and 7 below) creates all the device nodes -required by the driver. For a device to be created it must be configured -in the driver and the board must be installed. Only devices corresponding -to real IntelliPort II ports are created. With multiple boards and expansion -boxes this will leave gaps in the sequence of device names. ip2mkdev uses -Linux tty naming conventions: ttyF0 - ttyF255 for normal devices, and -cuf0 - cuf255 for callout devices. - - -4. USING THE DRIVERS - -As noted above, the driver implements the ports in accordance with Linux -conventions, and the devices should be interchangeable with the standard -serial devices. (This is a key point for problem reporting: please make -sure that what you are trying do works on the ttySx/cuax ports first; then -tell us what went wrong with the ip2 ports!) - -Higher speeds can be obtained using the setserial utility which remaps -38,400 bps (extb) to 57,600 bps, 115,200 bps, or a custom speed. -Intelliport II installations using the PowerPort expansion module can -use the custom speed setting to select the highest speeds: 153,600 bps, -230,400 bps, 307,200 bps, 460,800bps and 921,600 bps. The base for -custom baud rate configuration is fixed at 921,600 for cards/expansion -modules with ST654's and 115200 for those with Cirrus CD1400's. This -corresponds to the maximum bit rates those chips are capable. -For example if the baud base is 921600 and the baud divisor is 18 then -the custom rate is 921600/18 = 51200 bps. See the setserial man page for -complete details. Of course if stty accepts the higher rates now you can -use that as well as the standard ioctls(). - - -5. ip2mkdev and assorted utilities... - -Several utilities, including the source for a binary ip2mkdev utility are -available under .../drivers/char/ip2. These can be build by changing to -that directory and typing "make" after the kernel has be built. If you do -not wish to compile the binary utilities, the shell script below can be -cut out and run as "ip2mkdev" to create the necessary device files. To -use the ip2mkdev script, you must have procfs enabled and the proc file -system mounted on /proc. - - -6. NOTES - -This is a release version of the driver, but it is impossible to test it -in all configurations of Linux. If there is any anomalous behaviour that -does not match the standard serial port's behaviour please let us know. - - -7. ip2mkdev shell script - -Previously, this script was simply attached here. It is now attached as a -shar archive to make it easier to extract the script from the documentation. -To create the ip2mkdev shell script change to a convenient directory (/tmp -works just fine) and run the following command: - - unshar Documentation/serial/computone.txt - (This file) - -You should now have a file ip2mkdev in your current working directory with -permissions set to execute. Running that script with then create the -necessary devices for the Computone boards, interfaces, and ports which -are present on you system at the time it is run. - - -#!/bin/sh -# This is a shell archive (produced by GNU sharutils 4.2.1). -# To extract the files from this archive, save it to some FILE, remove -# everything before the `!/bin/sh' line above, then type `sh FILE'. -# -# Made on 2001-10-29 10:32 EST by . -# Source directory was `/home2/src/tmp'. -# -# Existing files will *not* be overwritten unless `-c' is specified. -# -# This shar contains: -# length mode name -# ------ ---------- ------------------------------------------ -# 4251 -rwxr-xr-x ip2mkdev -# -save_IFS="${IFS}" -IFS="${IFS}:" -gettext_dir=FAILED -locale_dir=FAILED -first_param="$1" -for dir in $PATH -do - if test "$gettext_dir" = FAILED && test -f $dir/gettext \ - && ($dir/gettext --version >/dev/null 2>&1) - then - set `$dir/gettext --version 2>&1` - if test "$3" = GNU - then - gettext_dir=$dir - fi - fi - if test "$locale_dir" = FAILED && test -f $dir/shar \ - && ($dir/shar --print-text-domain-dir >/dev/null 2>&1) - then - locale_dir=`$dir/shar --print-text-domain-dir` - fi -done -IFS="$save_IFS" -if test "$locale_dir" = FAILED || test "$gettext_dir" = FAILED -then - echo=echo -else - TEXTDOMAINDIR=$locale_dir - export TEXTDOMAINDIR - TEXTDOMAIN=sharutils - export TEXTDOMAIN - echo="$gettext_dir/gettext -s" -fi -if touch -am -t 200112312359.59 $$.touch >/dev/null 2>&1 && test ! -f 200112312359.59 -a -f $$.touch; then - shar_touch='touch -am -t $1$2$3$4$5$6.$7 "$8"' -elif touch -am 123123592001.59 $$.touch >/dev/null 2>&1 && test ! -f 123123592001.59 -a ! -f 123123592001.5 -a -f $$.touch; then - shar_touch='touch -am $3$4$5$6$1$2.$7 "$8"' -elif touch -am 1231235901 $$.touch >/dev/null 2>&1 && test ! -f 1231235901 -a -f $$.touch; then - shar_touch='touch -am $3$4$5$6$2 "$8"' -else - shar_touch=: - echo - $echo 'WARNING: not restoring timestamps. Consider getting and' - $echo "installing GNU \`touch', distributed in GNU File Utilities..." - echo -fi -rm -f 200112312359.59 123123592001.59 123123592001.5 1231235901 $$.touch -# -if mkdir _sh17581; then - $echo 'x -' 'creating lock directory' -else - $echo 'failed to create lock directory' - exit 1 -fi -# ============= ip2mkdev ============== -if test -f 'ip2mkdev' && test "$first_param" != -c; then - $echo 'x -' SKIPPING 'ip2mkdev' '(file already exists)' -else - $echo 'x -' extracting 'ip2mkdev' '(text)' - sed 's/^X//' << 'SHAR_EOF' > 'ip2mkdev' && -#!/bin/sh - -# -# ip2mkdev -# -# Make or remove devices as needed for Computone Intelliport drivers -# -# First rule! If the dev file exists and you need it, don't mess -# with it. That prevents us from screwing up open ttys, ownership -# and permissions on a running system! -# -# This script will NOT remove devices that no longer exist if their -# board or interface box has been removed. If you want to get rid -# of them, you can manually do an "rm -f /dev/ttyF* /dev/cuaf*" -# before running this script. Running this script will then recreate -# all the valid devices. -# -# Michael H. Warfield -# /\/\|=mhw=|\/\/ -# mhw@wittsend.com -# -# Updated 10/29/2000 for version 1.2.13 naming convention -# under devfs. /\/\|=mhw=|\/\/ -# -# Updated 03/09/2000 for devfs support in ip2 drivers. /\/\|=mhw=|\/\/ -# -X -if test -d /dev/ip2 ; then -# This is devfs mode... We don't do anything except create symlinks -# from the real devices to the old names! -X cd /dev -X echo "Creating symbolic links to devfs devices" -X for i in `ls ip2` ; do -X if test ! -L ip2$i ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f ip2$i -X ln -s ip2/$i ip2$i -X fi -X done -X for i in `( cd tts ; ls F* )` ; do -X if test ! -L tty$i ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f tty$i -X ln -s tts/$i tty$i -X fi -X done -X for i in `( cd cua ; ls F* )` ; do -X DEVNUMBER=`expr $i : 'F\(.*\)'` -X if test ! -L cuf$DEVNUMBER ; then -X # Remove it incase it wasn't a symlink (old device) -X rm -f cuf$DEVNUMBER -X ln -s cua/$i cuf$DEVNUMBER -X fi -X done -X exit 0 -fi -X -if test ! -f /proc/tty/drivers -then -X echo "\ -Unable to check driver status. -Make sure proc file system is mounted." -X -X exit 255 -fi -X -if test ! -f /proc/tty/driver/ip2 -then -X echo "\ -Unable to locate ip2 proc file. -Attempting to load driver" -X -X if /sbin/insmod ip2 -X then -X if test ! -f /proc/tty/driver/ip2 -X then -X echo "\ -Unable to locate ip2 proc file after loading driver. -Driver initialization failure or driver version error. -" -X exit 255 -X fi -X else -X echo "Unable to load ip2 driver." -X exit 255 -X fi -fi -X -# Ok... So we got the driver loaded and we can locate the procfs files. -# Next we need our major numbers. -X -TTYMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/tt/!d' -e 's/.*tt[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` -CUAMAJOR=`sed -e '/^ip2/!d' -e '/\/dev\/cu/!d' -e 's/.*cu[^ ]*[ ]*\([0-9]*\)[ ]*.*/\1/' < /proc/tty/drivers` -BRDMAJOR=`sed -e '/^Driver: /!d' -e 's/.*IMajor=\([0-9]*\)[ ]*.*/\1/' < /proc/tty/driver/ip2` -X -echo "\ -TTYMAJOR = $TTYMAJOR -CUAMAJOR = $CUAMAJOR -BRDMAJOR = $BRDMAJOR -" -X -# Ok... Now we should know our major numbers, if appropriate... -# Now we need our boards and start the device loops. -X -grep '^Board [0-9]:' /proc/tty/driver/ip2 | while read token number type alltherest -do -X # The test for blank "type" will catch the stats lead-in lines -X # if they exist in the file -X if test "$type" = "vacant" -o "$type" = "Vacant" -o "$type" = "" -X then -X continue -X fi -X -X BOARDNO=`expr "$number" : '\([0-9]\):'` -X PORTS=`expr "$alltherest" : '.*ports=\([0-9]*\)' | tr ',' ' '` -X MINORS=`expr "$alltherest" : '.*minors=\([0-9,]*\)' | tr ',' ' '` -X -X if test "$BOARDNO" = "" -o "$PORTS" = "" -X then -# This may be a bug. We should at least get this much information -X echo "Unable to process board line" -X continue -X fi -X -X if test "$MINORS" = "" -X then -# Silently skip this one. This board seems to have no boxes -X continue -X fi -X -X echo "board $BOARDNO: $type ports = $PORTS; port numbers = $MINORS" -X -X if test "$BRDMAJOR" != "" -X then -X BRDMINOR=`expr $BOARDNO \* 4` -X STSMINOR=`expr $BRDMINOR + 1` -X if test ! -c /dev/ip2ipl$BOARDNO ; then -X mknod /dev/ip2ipl$BOARDNO c $BRDMAJOR $BRDMINOR -X fi -X if test ! -c /dev/ip2stat$BOARDNO ; then -X mknod /dev/ip2stat$BOARDNO c $BRDMAJOR $STSMINOR -X fi -X fi -X -X if test "$TTYMAJOR" != "" -X then -X PORTNO=$BOARDBASE -X -X for PORTNO in $MINORS -X do -X if test ! -c /dev/ttyF$PORTNO ; then -X # We got the hardware but no device - make it -X mknod /dev/ttyF$PORTNO c $TTYMAJOR $PORTNO -X fi -X done -X fi -X -X if test "$CUAMAJOR" != "" -X then -X PORTNO=$BOARDBASE -X -X for PORTNO in $MINORS -X do -X if test ! -c /dev/cuf$PORTNO ; then -X # We got the hardware but no device - make it -X mknod /dev/cuf$PORTNO c $CUAMAJOR $PORTNO -X fi -X done -X fi -done -X -Xexit 0 -SHAR_EOF - (set 20 01 10 29 10 32 01 'ip2mkdev'; eval "$shar_touch") && - chmod 0755 'ip2mkdev' || - $echo 'restore of' 'ip2mkdev' 'failed' - if ( md5sum --help 2>&1 | grep 'sage: md5sum \[' ) >/dev/null 2>&1 \ - && ( md5sum --version 2>&1 | grep -v 'textutils 1.12' ) >/dev/null; then - md5sum -c << SHAR_EOF >/dev/null 2>&1 \ - || $echo 'ip2mkdev:' 'MD5 check failed' -cb5717134509f38bad9fde6b1f79b4a4 ip2mkdev -SHAR_EOF - else - shar_count="`LC_ALL= LC_CTYPE= LANG= wc -c < 'ip2mkdev'`" - test 4251 -eq "$shar_count" || - $echo 'ip2mkdev:' 'original size' '4251,' 'current size' "$shar_count!" - fi -fi -rm -fr _sh17581 -exit 0 diff --git a/Documentation/smsc_ece1099.txt b/Documentation/smsc_ece1099.txt new file mode 100644 index 0000000000000000000000000000000000000000..6b492e82b43d98b93020e033ea1b108adbbf6033 --- /dev/null +++ b/Documentation/smsc_ece1099.txt @@ -0,0 +1,56 @@ +What is smsc-ece1099? +---------------------- + +The ECE1099 is a 40-Pin 3.3V Keyboard Scan Expansion +or GPIO Expansion device. The device supports a keyboard +scan matrix of 23x8. The device is connected to a Master +via the SMSC BC-Link interface or via the SMBus. +Keypad scan Input(KSI) and Keypad Scan Output(KSO) signals +are multiplexed with GPIOs. + +Interrupt generation +-------------------- + +Interrupts can be generated by an edge detection on a GPIO +pin or an edge detection on one of the bus interface pins. +Interrupts can also be detected on the keyboard scan interface. +The bus interrupt pin (BC_INT# or SMBUS_INT#) is asserted if +any bit in one of the Interrupt Status registers is 1 and +the corresponding Interrupt Mask bit is also 1. + +In order for software to determine which device is the source +of an interrupt, it should first read the Group Interrupt Status Register +to determine which Status register group is a source for the interrupt. +Software should read both the Status register and the associated Mask register, +then AND the two values together. Bits that are 1 in the result of the AND +are active interrupts. Software clears an interrupt by writing a 1 to the +corresponding bit in the Status register. + +Communication Protocol +---------------------- + +- SMbus slave Interface + The host processor communicates with the ECE1099 device + through a series of read/write registers via the SMBus + interface. SMBus is a serial communication protocol between + a computer host and its peripheral devices. The SMBus data + rate is 10KHz minimum to 400 KHz maximum + +- Slave Bus Interface + The ECE1099 device SMBus implementation is a subset of the + SMBus interface to the host. The device is a slave-only SMBus device. + The implementation in the device is a subset of SMBus since it + only supports four protocols. + + The Write Byte, Read Byte, Send Byte, and Receive Byte protocols are the + only valid SMBus protocols for the device. + +- BC-LinkTM Interface + The BC-Link is a proprietary bus that allows communication + between a Master device and a Companion device. The Master + device uses this serial bus to read and write registers + located on the Companion device. The bus comprises three signals, + BC_CLK, BC_DAT and BC_INT#. The Master device always provides the + clock, BC_CLK, and the Companion device is the source for an + independent asynchronous interrupt signal, BC_INT#. The ECE1099 + supports BC-Link speeds up to 24MHz. diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 4e4d0bc9816f9d25f1c185d795f98b476bb50a2c..d90d8ec2853df3e49e18edefc1bffd8995826403 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -860,8 +860,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. [Multiple options for each card instance] model - force the model name - position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF, - 3 = VIACOMBO, 4 = COMBO) + position_fix - Fix DMA pointer + -1 = system default: choose appropriate one per controller + hardware + 0 = auto: falls back to LPIB when POSBUF doesn't work + 1 = use LPIB + 2 = POSBUF: use position buffer + 3 = VIACOMBO: VIA-specific workaround for capture + 4 = COMBO: use LPIB for playback, auto for capture stream probe_mask - Bitmask to probe codecs (default = -1, meaning all slots) When the bit 8 (0x100) is set, the lower 8 bits are used as the "fixed" codec slots; i.e. the driver probes the diff --git a/Documentation/sound/alsa/Channel-Mapping-API.txt b/Documentation/sound/alsa/Channel-Mapping-API.txt new file mode 100644 index 0000000000000000000000000000000000000000..3c43d1a4ca0ea88e91ac62b86d942fadf69888a6 --- /dev/null +++ b/Documentation/sound/alsa/Channel-Mapping-API.txt @@ -0,0 +1,153 @@ +ALSA PCM channel-mapping API +============================ + Takashi Iwai + +GENERAL +------- + +The channel mapping API allows user to query the possible channel maps +and the current channel map, also optionally to modify the channel map +of the current stream. + +A channel map is an array of position for each PCM channel. +Typically, a stereo PCM stream has a channel map of + { front_left, front_right } +while a 4.0 surround PCM stream has a channel map of + { front left, front right, rear left, rear right }. + +The problem, so far, was that we had no standard channel map +explicitly, and applications had no way to know which channel +corresponds to which (speaker) position. Thus, applications applied +wrong channels for 5.1 outputs, and you hear suddenly strange sound +from rear. Or, some devices secretly assume that center/LFE is the +third/fourth channels while others that C/LFE as 5th/6th channels. + +Also, some devices such as HDMI are configurable for different speaker +positions even with the same number of total channels. However, there +was no way to specify this because of lack of channel map +specification. These are the main motivations for the new channel +mapping API. + + +DESIGN +------ + +Actually, "the channel mapping API" doesn't introduce anything new in +the kernel/user-space ABI perspective. It uses only the existing +control element features. + +As a ground design, each PCM substream may contain a control element +providing the channel mapping information and configuration. This +element is specified by: + iface = SNDRV_CTL_ELEM_IFACE_PCM + name = "Playback Channel Map" or "Capture Channel Map" + device = the same device number for the assigned PCM substream + index = the same index number for the assigned PCM substream + +Note the name is different depending on the PCM substream direction. + +Each control element provides at least the TLV read operation and the +read operation. Optionally, the write operation can be provided to +allow user to change the channel map dynamically. + +* TLV + +The TLV operation gives the list of available channel +maps. A list item of a channel map is usually a TLV of + type data-bytes ch0 ch1 ch2... +where type is the TLV type value, the second argument is the total +bytes (not the numbers) of channel values, and the rest are the +position value for each channel. + +As a TLV type, either SNDRV_CTL_TLVT_CHMAP_FIXED, +SNDRV_CTL_TLV_CHMAP_VAR or SNDRV_CTL_TLVT_CHMAP_PAIRED can be used. +The _FIXED type is for a channel map with the fixed channel position +while the latter two are for flexible channel positions. _VAR type is +for a channel map where all channels are freely swappable and _PAIRED +type is where pair-wise channels are swappable. For example, when you +have {FL/FR/RL/RR} channel map, _PAIRED type would allow you to swap +only {RL/RR/FL/FR} while _VAR type would allow even swapping FL and +RR. + +These new TLV types are defined in sound/tlv.h. + +The available channel position values are defined in sound/asound.h, +here is a cut: + +/* channel positions */ +enum { + SNDRV_CHMAP_UNKNOWN = 0, + SNDRV_CHMAP_NA, /* N/A, silent */ + SNDRV_CHMAP_MONO, /* mono stream */ + /* this follows the alsa-lib mixer channel value + 3 */ + SNDRV_CHMAP_FL, /* front left */ + SNDRV_CHMAP_FR, /* front right */ + SNDRV_CHMAP_RL, /* rear left */ + SNDRV_CHMAP_RR, /* rear right */ + SNDRV_CHMAP_FC, /* front center */ + SNDRV_CHMAP_LFE, /* LFE */ + SNDRV_CHMAP_SL, /* side left */ + SNDRV_CHMAP_SR, /* side right */ + SNDRV_CHMAP_RC, /* rear center */ + /* new definitions */ + SNDRV_CHMAP_FLC, /* front left center */ + SNDRV_CHMAP_FRC, /* front right center */ + SNDRV_CHMAP_RLC, /* rear left center */ + SNDRV_CHMAP_RRC, /* rear right center */ + SNDRV_CHMAP_FLW, /* front left wide */ + SNDRV_CHMAP_FRW, /* front right wide */ + SNDRV_CHMAP_FLH, /* front left high */ + SNDRV_CHMAP_FCH, /* front center high */ + SNDRV_CHMAP_FRH, /* front right high */ + SNDRV_CHMAP_TC, /* top center */ + SNDRV_CHMAP_TFL, /* top front left */ + SNDRV_CHMAP_TFR, /* top front right */ + SNDRV_CHMAP_TFC, /* top front center */ + SNDRV_CHMAP_TRL, /* top rear left */ + SNDRV_CHMAP_TRR, /* top rear right */ + SNDRV_CHMAP_TRC, /* top rear center */ + SNDRV_CHMAP_LAST = SNDRV_CHMAP_TRC, +}; + +When a PCM stream can provide more than one channel map, you can +provide multiple channel maps in a TLV container type. The TLV data +to be returned will contain such as: + SNDRV_CTL_TLVT_CONTAINER 96 + SNDRV_CTL_TLVT_CHMAP_FIXED 4 SNDRV_CHMAP_FC + SNDRV_CTL_TLVT_CHMAP_FIXED 8 SNDRV_CHMAP_FL SNDRV_CHMAP_FR + SNDRV_CTL_TLVT_CHMAP_FIXED 16 NDRV_CHMAP_FL SNDRV_CHMAP_FR \ + SNDRV_CHMAP_RL SNDRV_CHMAP_RR + +The channel position is provided in LSB 16bits. The upper bits are +used for bit flags. + +#define SNDRV_CHMAP_POSITION_MASK 0xffff +#define SNDRV_CHMAP_PHASE_INVERSE (0x01 << 16) +#define SNDRV_CHMAP_DRIVER_SPEC (0x02 << 16) + +SNDRV_CHMAP_PHASE_INVERSE indicates the channel is phase inverted, +(thus summing left and right channels would result in almost silence). +Some digital mic devices have this. + +When SNDRV_CHMAP_DRIVER_SPEC is set, all the channel position values +don't follow the standard definition above but driver-specific. + +* READ OPERATION + +The control read operation is for providing the current channel map of +the given stream. The control element returns an integer array +containing the position of each channel. + +When this is performed before the number of the channel is specified +(i.e. hw_params is set), it should return all channels set to +UNKNOWN. + +* WRITE OPERATION + +The control write operation is optional, and only for devices that can +change the channel configuration on the fly, such as HDMI. User needs +to pass an integer value containing the valid channel positions for +all channels of the assigned PCM substream. + +This operation is allowed only at PCM PREPARED state. When called in +other states, it shall return an error. diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index a92bba8168435bc731ce8db34530d55639fa8def..16dfe57f173167c9df59bfdc6c1cefff9db2fa0f 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -74,7 +74,8 @@ CMI9880 AD1882 / AD1882A ================ - 3stack 3-stack mode (default) + 3stack 3-stack mode + 3stack-automute 3-stack with automute front HP (default) 6stack 6-stack mode AD1884A / AD1883 / AD1984A / AD1984B diff --git a/Documentation/spi/ep93xx_spi b/Documentation/spi/ep93xx_spi index d8eb01c15db1cc9cf801138a87e21a7464ad0045..832ddce6e5fb461a6950e6d0b0639f4d8f473b72 100644 --- a/Documentation/spi/ep93xx_spi +++ b/Documentation/spi/ep93xx_spi @@ -26,7 +26,7 @@ arch/arm/mach-ep93xx/ts72xx.c: #include #include -#include +#include /* this is our GPIO line used for chip select */ #define MMC_CHIP_SELECT_GPIO EP93XX_GPIO_LINE_EGPIO9 diff --git a/Documentation/spi/spi-sc18is602 b/Documentation/spi/spi-sc18is602 new file mode 100644 index 0000000000000000000000000000000000000000..a45702865a38a011a5aebbf64a3cc810e2d6a106 --- /dev/null +++ b/Documentation/spi/spi-sc18is602 @@ -0,0 +1,36 @@ +Kernel driver spi-sc18is602 +=========================== + +Supported chips: + * NXP SI18IS602/602B/603 + Datasheet: http://www.nxp.com/documents/data_sheet/SC18IS602_602B_603.pdf + +Author: + Guenter Roeck + + +Description +----------- + +This driver provides connects a NXP SC18IS602/603 I2C-bus to SPI bridge to the +kernel's SPI core subsystem. + +The driver does not probe for supported chips, since the SI18IS602/603 does not +support Chip ID registers. You will have to instantiate the devices explicitly. +Please see Documentation/i2c/instantiating-devices for details. + + +Usage Notes +----------- + +This driver requires the I2C adapter driver to support raw I2C messages. I2C +adapter drivers which can only handle the SMBus protocol are not supported. + +The maximum SPI message size supported by SC18IS602/603 is 200 bytes. Attempts +to initiate longer transfers will fail with -EINVAL. EEPROM read operations and +similar large accesses have to be split into multiple chunks of no more than +200 bytes per SPI message (128 bytes of data per message is recommended). This +means that programs such as "cp" or "od", which automatically use large block +sizes to access a device, can not be used directly to read data from EEPROM. +Programs such as dd, where the block size can be specified, should be used +instead. diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 6d78841fd41677d4f81dbcb53eed7ab8602cddb4..2907ba6c3607dfd557e3e4533413b0bea8518a60 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -181,6 +181,8 @@ core_pattern is used to specify a core dumpfile pattern name. %p pid %u uid %g gid + %d dump mode, matches PR_SET_DUMPABLE and + /proc/sys/fs/suid_dumpable %s signal number %t UNIX time of dump %h hostname diff --git a/Documentation/trace/kprobetrace.txt b/Documentation/trace/kprobetrace.txt index d0d0bb9e3e25653ce46189a046f622d207c0dbc9..d68ea5fc812b0fdffc11085a3966c39d8b6f58e8 100644 --- a/Documentation/trace/kprobetrace.txt +++ b/Documentation/trace/kprobetrace.txt @@ -12,7 +12,7 @@ kprobes can probe (this means, all functions body except for __kprobes functions). Unlike the Tracepoint based event, this can be added and removed dynamically, on the fly. -To enable this feature, build your kernel with CONFIG_KPROBE_TRACING=y. +To enable this feature, build your kernel with CONFIG_KPROBE_EVENT=y. Similar to the events tracer, this doesn't need to be activated via current_tracer. Instead of that, add probe points via diff --git a/Documentation/usb/persist.txt b/Documentation/usb/persist.txt index 074b159b77c20344aaa0a4abf7becc8603a2a065..35d70eda9ad627bf0eff7c1193f91fb451126e5b 100644 --- a/Documentation/usb/persist.txt +++ b/Documentation/usb/persist.txt @@ -155,6 +155,9 @@ If the kernel gets fooled in this way, it's almost certain to cause data corruption and to crash your system. You'll have no one to blame but yourself. +For those devices with avoid_reset_quirk attribute being set, persist +maybe fail because they may morph after reset. + YOU HAVE BEEN WARNED! USE AT YOUR OWN RISK! That having been said, most of the time there shouldn't be any trouble diff --git a/Documentation/vfio.txt b/Documentation/vfio.txt index 0cb6685c802904c0d7becccb00e3a00321bfb928..8eda3635a17da0e8d610a01e88d928a68f833f93 100644 --- a/Documentation/vfio.txt +++ b/Documentation/vfio.txt @@ -133,7 +133,7 @@ character devices for this group: $ lspci -n -s 0000:06:0d.0 06:0d.0 0401: 1102:0002 (rev 08) # echo 0000:06:0d.0 > /sys/bus/pci/devices/0000:06:0d.0/driver/unbind -# echo 1102 0002 > /sys/bus/pci/drivers/vfio/new_id +# echo 1102 0002 > /sys/bus/pci/drivers/vfio-pci/new_id Now we need to look at what other devices are in the group to free it for use by VFIO: diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 652aecd131998a7d2958a6a7cc2978e0eeeaa9ae..1299b5e82d7f42450e12eef450dbf6a650823428 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -35,3 +35,4 @@ 34 -> TerraTec Cinergy T PCIe Dual [153b:117e] 35 -> TeVii S471 [d471:9022] 36 -> Hauppauge WinTV-HVR1255 [0070:2259] + 37 -> Prof Revolution DVB-S2 8000 [8000:3034] diff --git a/Documentation/video4linux/CQcam.txt b/Documentation/video4linux/CQcam.txt index 6e680fec1e9c1d5e43a39e3e160572beb7c1b4c2..0b69e4ee8e312d8dd8e26489b706f83aa6851382 100644 --- a/Documentation/video4linux/CQcam.txt +++ b/Documentation/video4linux/CQcam.txt @@ -18,7 +18,7 @@ Table of Contents 1.0 Introduction - The file ../../drivers/media/video/c-qcam.c is a device driver for + The file ../../drivers/media/parport/c-qcam.c is a device driver for the Logitech (nee Connectix) parallel port interface color CCD camera. This is a fairly inexpensive device for capturing images. Logitech does not currently provide information for developers, but many people diff --git a/Documentation/video4linux/README.davinci-vpbe b/Documentation/video4linux/README.davinci-vpbe index 7a460b0685bb6cfe8d2f631de9ee7a24d9031401..dc9a297f49c3fb0551294b0b89e9b70e0446b1b9 100644 --- a/Documentation/video4linux/README.davinci-vpbe +++ b/Documentation/video4linux/README.davinci-vpbe @@ -5,22 +5,22 @@ File partitioning ----------------- V4L2 display device driver - drivers/media/video/davinci/vpbe_display.c - drivers/media/video/davinci/vpbe_display.h + drivers/media/platform/davinci/vpbe_display.c + drivers/media/platform/davinci/vpbe_display.h VPBE display controller - drivers/media/video/davinci/vpbe.c - drivers/media/video/davinci/vpbe.h + drivers/media/platform/davinci/vpbe.c + drivers/media/platform/davinci/vpbe.h VPBE venc sub device driver - drivers/media/video/davinci/vpbe_venc.c - drivers/media/video/davinci/vpbe_venc.h - drivers/media/video/davinci/vpbe_venc_regs.h + drivers/media/platform/davinci/vpbe_venc.c + drivers/media/platform/davinci/vpbe_venc.h + drivers/media/platform/davinci/vpbe_venc_regs.h VPBE osd driver - drivers/media/video/davinci/vpbe_osd.c - drivers/media/video/davinci/vpbe_osd.h - drivers/media/video/davinci/vpbe_osd_regs.h + drivers/media/platform/davinci/vpbe_osd.c + drivers/media/platform/davinci/vpbe_osd.h + drivers/media/platform/davinci/vpbe_osd_regs.h Functional partitioning ----------------------- diff --git a/Documentation/video4linux/fimc.txt b/Documentation/video4linux/fimc.txt index eb049708f3e4b10b3464f6eb2f149651cd722893..fd02d9a4930a35bee8407b8fb701a617c7b93d5a 100644 --- a/Documentation/video4linux/fimc.txt +++ b/Documentation/video4linux/fimc.txt @@ -10,7 +10,7 @@ data from LCD controller (FIMD) through the SoC internal writeback data path. There are multiple FIMC instances in the SoCs (up to 4), having slightly different capabilities, like pixel alignment constraints, rotator availability, LCD writeback support, etc. The driver is located at -drivers/media/video/s5p-fimc directory. +drivers/media/platform/s5p-fimc directory. 1. Supported SoCs ================= @@ -36,21 +36,21 @@ Not currently supported: ===================== - media device driver - drivers/media/video/s5p-fimc/fimc-mdevice.[ch] + drivers/media/platform/s5p-fimc/fimc-mdevice.[ch] - camera capture video device driver - drivers/media/video/s5p-fimc/fimc-capture.c + drivers/media/platform/s5p-fimc/fimc-capture.c - MIPI-CSI2 receiver subdev - drivers/media/video/s5p-fimc/mipi-csis.[ch] + drivers/media/platform/s5p-fimc/mipi-csis.[ch] - video post-processor (mem-to-mem) - drivers/media/video/s5p-fimc/fimc-core.c + drivers/media/platform/s5p-fimc/fimc-core.c - common files - drivers/media/video/s5p-fimc/fimc-core.h - drivers/media/video/s5p-fimc/fimc-reg.h - drivers/media/video/s5p-fimc/regs-fimc.h + drivers/media/platform/s5p-fimc/fimc-core.h + drivers/media/platform/s5p-fimc/fimc-reg.h + drivers/media/platform/s5p-fimc/regs-fimc.h 4. User space interfaces ======================== diff --git a/Documentation/video4linux/omap3isp.txt b/Documentation/video4linux/omap3isp.txt index 5dd1439b61fd512b94b3404f959e824ab3816f4d..b9a9f83b1587f40008b3201890f973205d743f80 100644 --- a/Documentation/video4linux/omap3isp.txt +++ b/Documentation/video4linux/omap3isp.txt @@ -12,7 +12,7 @@ Introduction ============ This file documents the Texas Instruments OMAP 3 Image Signal Processor (ISP) -driver located under drivers/media/video/omap3isp. The original driver was +driver located under drivers/media/platform/omap3isp. The original driver was written by Texas Instruments but since that it has been rewritten (twice) at Nokia. diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt index 43da22b8972869c7d283d751674d6633d7cd822d..54270df99d5c2f1794c4fcd537eec05fd525d031 100644 --- a/Documentation/video4linux/v4l2-controls.txt +++ b/Documentation/video4linux/v4l2-controls.txt @@ -594,7 +594,11 @@ handler and finally add the first handler to the second. For example: v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...); v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...); v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...); - v4l2_ctrl_add_handler(&video_ctrl_handler, &radio_ctrl_handler); + v4l2_ctrl_add_handler(&video_ctrl_handler, &radio_ctrl_handler, NULL); + +The last argument to v4l2_ctrl_add_handler() is a filter function that allows +you to filter which controls will be added. Set it to NULL if you want to add +all controls. Or you can add specific controls to a handler: diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 89318be6c1d2117581b0dfbb5fc478370c8e0f5a..32bfe926e8d77717e67a9e485ca89b398f5c26a8 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -583,11 +583,19 @@ You should also set these fields: - name: set to something descriptive and unique. +- vfl_dir: set this to VFL_DIR_RX for capture devices (VFL_DIR_RX has value 0, + so this is normally already the default), set to VFL_DIR_TX for output + devices and VFL_DIR_M2M for mem2mem (codec) devices. + - fops: set to the v4l2_file_operations struct. - ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance (highly recommended to use this and it might become compulsory in the - future!), then set this to your v4l2_ioctl_ops struct. + future!), then set this to your v4l2_ioctl_ops struct. The vfl_type and + vfl_dir fields are used to disable ops that do not match the type/dir + combination. E.g. VBI ops are disabled for non-VBI nodes, and output ops + are disabled for a capture device. This makes it possible to provide + just one v4l2_ioctl_ops struct for both vbi and video nodes. - lock: leave to NULL if you want to do all the locking in the driver. Otherwise you give it a pointer to a struct mutex_lock and before the @@ -1054,4 +1062,4 @@ The first event type in the class is reserved for future use, so the first available event type is 'class base + 1'. An example on how the V4L2 events may be used can be found in the OMAP -3 ISP driver (drivers/media/video/omap3isp). +3 ISP driver (drivers/media/platform/omap3isp). diff --git a/Documentation/video4linux/videobuf b/Documentation/video4linux/videobuf index 1d00d7f15b8f730ee4de10ca2f9f28d5a529eadc..3ffe9e960b6f65e1be78e2480573389f1d940f6c 100644 --- a/Documentation/video4linux/videobuf +++ b/Documentation/video4linux/videobuf @@ -349,7 +349,7 @@ again. Developers who are interested in more information can go into the relevant header files; there are a few low-level functions declared there which have not been talked about here. Also worthwhile is the vivi driver -(drivers/media/video/vivi.c), which is maintained as an example of how V4L2 +(drivers/media/platform/vivi.c), which is maintained as an example of how V4L2 drivers should be written. Vivi only uses the vmalloc() API, but it's good enough to get started with. Note also that all of these calls are exported GPL-only, so they will not be available to non-GPL kernel modules. diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index bf33aaa4c59f8f2e507fdd3e9c32528b16e831d1..f6ec3a92e62148087b8ac0764e8f916e175d8eb8 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -857,7 +857,8 @@ struct kvm_userspace_memory_region { }; /* for kvm_memory_region::flags */ -#define KVM_MEM_LOG_DIRTY_PAGES 1UL +#define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0) +#define KVM_MEM_READONLY (1UL << 1) This ioctl allows the user to create or modify a guest physical memory slot. When changing an existing slot, it may be moved in the guest @@ -873,14 +874,17 @@ It is recommended that the lower 21 bits of guest_phys_addr and userspace_addr be identical. This allows large pages in the guest to be backed by large pages in the host. -The flags field supports just one flag, KVM_MEM_LOG_DIRTY_PAGES, which -instructs kvm to keep track of writes to memory within the slot. See -the KVM_GET_DIRTY_LOG ioctl. +The flags field supports two flag, KVM_MEM_LOG_DIRTY_PAGES, which instructs +kvm to keep track of writes to memory within the slot. See KVM_GET_DIRTY_LOG +ioctl. The KVM_CAP_READONLY_MEM capability indicates the availability of the +KVM_MEM_READONLY flag. When this flag is set for a memory region, KVM only +allows read accesses. Writes will be posted to userspace as KVM_EXIT_MMIO +exits. -When the KVM_CAP_SYNC_MMU capability, changes in the backing of the memory -region are automatically reflected into the guest. For example, an mmap() -that affects the region will be made visible immediately. Another example -is madvise(MADV_DROP). +When the KVM_CAP_SYNC_MMU capability is available, changes in the backing of +the memory region are automatically reflected into the guest. For example, an +mmap() that affects the region will be made visible immediately. Another +example is madvise(MADV_DROP). It is recommended to use this API instead of the KVM_SET_MEMORY_REGION ioctl. The KVM_SET_MEMORY_REGION does not allow fine grained control over memory @@ -1946,6 +1950,19 @@ the guest using the specified gsi pin. The irqfd is removed using the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd and kvm_irqfd.gsi. +With KVM_CAP_IRQFD_RESAMPLE, KVM_IRQFD supports a de-assert and notify +mechanism allowing emulation of level-triggered, irqfd-based +interrupts. When KVM_IRQFD_FLAG_RESAMPLE is set the user must pass an +additional eventfd in the kvm_irqfd.resamplefd field. When operating +in resample mode, posting of an interrupt through kvm_irq.fd asserts +the specified gsi in the irqchip. When the irqchip is resampled, such +as from an EOI, the gsi is de-asserted and the user is notifed via +kvm_irqfd.resamplefd. It is the user's responsibility to re-queue +the interrupt if the device making use of it still requires service. +Note that closing the resamplefd is not sufficient to disable the +irqfd. The KVM_IRQFD_FLAG_RESAMPLE is only necessary on assignment +and need not be specified with KVM_IRQFD_FLAG_DEASSIGN. + 4.76 KVM_PPC_ALLOCATE_HTAB Capability: KVM_CAP_PPC_ALLOC_HTAB diff --git a/Documentation/virtual/kvm/hypercalls.txt b/Documentation/virtual/kvm/hypercalls.txt new file mode 100644 index 0000000000000000000000000000000000000000..ea113b5d87a4a8530fcc32f57a4da78c6e9e7281 --- /dev/null +++ b/Documentation/virtual/kvm/hypercalls.txt @@ -0,0 +1,66 @@ +Linux KVM Hypercall: +=================== +X86: + KVM Hypercalls have a three-byte sequence of either the vmcall or the vmmcall + instruction. The hypervisor can replace it with instructions that are + guaranteed to be supported. + + Up to four arguments may be passed in rbx, rcx, rdx, and rsi respectively. + The hypercall number should be placed in rax and the return value will be + placed in rax. No other registers will be clobbered unless explicitly stated + by the particular hypercall. + +S390: + R2-R7 are used for parameters 1-6. In addition, R1 is used for hypercall + number. The return value is written to R2. + + S390 uses diagnose instruction as hypercall (0x500) along with hypercall + number in R1. + + PowerPC: + It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers. + Return value is placed in R3. + + KVM hypercalls uses 4 byte opcode, that are patched with 'hypercall-instructions' + property inside the device tree's /hypervisor node. + For more information refer to Documentation/virtual/kvm/ppc-pv.txt + +KVM Hypercalls Documentation +=========================== +The template for each hypercall is: +1. Hypercall name. +2. Architecture(s) +3. Status (deprecated, obsolete, active) +4. Purpose + +1. KVM_HC_VAPIC_POLL_IRQ +------------------------ +Architecture: x86 +Status: active +Purpose: Trigger guest exit so that the host can check for pending +interrupts on reentry. + +2. KVM_HC_MMU_OP +------------------------ +Architecture: x86 +Status: deprecated. +Purpose: Support MMU operations such as writing to PTE, +flushing TLB, release PT. + +3. KVM_HC_FEATURES +------------------------ +Architecture: PPC +Status: active +Purpose: Expose hypercall availability to the guest. On x86 platforms, cpuid +used to enumerate which hypercalls are available. On PPC, either device tree +based lookup ( which is also what EPAPR dictates) OR KVM specific enumeration +mechanism (which is this hypercall) can be used. + +4. KVM_HC_PPC_MAP_MAGIC_PAGE +------------------------ +Architecture: PPC +Status: active +Purpose: To enable communication between the hypervisor and guest there is a +shared page that contains parts of supervisor visible register state. +The guest can map this shared page to access its supervisor register through +memory using this hypercall. diff --git a/Documentation/virtual/kvm/msr.txt b/Documentation/virtual/kvm/msr.txt index 730471048583b9a034a78eb1da4b805373f29c25..6d470ae7b073a2fa13e2f28d741166cbc346e42f 100644 --- a/Documentation/virtual/kvm/msr.txt +++ b/Documentation/virtual/kvm/msr.txt @@ -34,9 +34,12 @@ MSR_KVM_WALL_CLOCK_NEW: 0x4b564d00 time information and check that they are both equal and even. An odd version indicates an in-progress update. - sec: number of seconds for wallclock. + sec: number of seconds for wallclock at time of boot. - nsec: number of nanoseconds for wallclock. + nsec: number of nanoseconds for wallclock at time of boot. + + In order to get the current wallclock time, the system_time from + MSR_KVM_SYSTEM_TIME_NEW needs to be added. Note that although MSRs are per-CPU entities, the effect of this particular MSR is global. @@ -82,20 +85,25 @@ MSR_KVM_SYSTEM_TIME_NEW: 0x4b564d01 time at the time this structure was last updated. Unit is nanoseconds. - tsc_to_system_mul: a function of the tsc frequency. One has - to multiply any tsc-related quantity by this value to get - a value in nanoseconds, besides dividing by 2^tsc_shift + tsc_to_system_mul: multiplier to be used when converting + tsc-related quantity to nanoseconds - tsc_shift: cycle to nanosecond divider, as a power of two, to - allow for shift rights. One has to shift right any tsc-related - quantity by this value to get a value in nanoseconds, besides - multiplying by tsc_to_system_mul. + tsc_shift: shift to be used when converting tsc-related + quantity to nanoseconds. This shift will ensure that + multiplication with tsc_to_system_mul does not overflow. + A positive value denotes a left shift, a negative value + a right shift. - With this information, guests can derive per-CPU time by - doing: + The conversion from tsc to nanoseconds involves an additional + right shift by 32 bits. With this information, guests can + derive per-CPU time by doing: time = (current_tsc - tsc_timestamp) - time = (time * tsc_to_system_mul) >> tsc_shift + if (tsc_shift >= 0) + time <<= tsc_shift; + else + time >>= -tsc_shift; + time = (time * tsc_to_system_mul) >> 32 time = time + system_time flags: bits in this field indicate extended capabilities diff --git a/Documentation/virtual/kvm/ppc-pv.txt b/Documentation/virtual/kvm/ppc-pv.txt index 4911cf95c67e51507118139a7d20897f67fbd888..4cd076febb0239452db01b8e127d6f810081efbb 100644 --- a/Documentation/virtual/kvm/ppc-pv.txt +++ b/Documentation/virtual/kvm/ppc-pv.txt @@ -174,3 +174,25 @@ following: That way we can inject an arbitrary amount of code as replacement for a single instruction. This allows us to check for pending interrupts when setting EE=1 for example. + +Hypercall ABIs in KVM on PowerPC +================================= +1) KVM hypercalls (ePAPR) + +These are ePAPR compliant hypercall implementation (mentioned above). Even +generic hypercalls are implemented here, like the ePAPR idle hcall. These are +available on all targets. + +2) PAPR hypercalls + +PAPR hypercalls are needed to run server PowerPC PAPR guests (-M pseries in QEMU). +These are the same hypercalls that pHyp, the POWER hypervisor implements. Some of +them are handled in the kernel, some are handled in user space. This is only +available on book3s_64. + +3) OSI hypercalls + +Mac-on-Linux is another user of KVM on PowerPC, which has its own hypercall (long +before KVM). This is supported to maintain compatibility. All these hypercalls get +forwarded to user space. This is only useful on book3s_32, but can be used with +book3s_64 as well. diff --git a/Documentation/vm/hugetlbpage.txt b/Documentation/vm/hugetlbpage.txt index f8551b3879f8442350a94b9f88377961ed8e8abd..4ac359b7aa176d1d1b61a100bc196332d842029b 100644 --- a/Documentation/vm/hugetlbpage.txt +++ b/Documentation/vm/hugetlbpage.txt @@ -299,11 +299,17 @@ map_hugetlb.c. ******************************************************************* /* - * hugepage-shm: see Documentation/vm/hugepage-shm.c + * map_hugetlb: see tools/testing/selftests/vm/map_hugetlb.c */ ******************************************************************* /* - * hugepage-mmap: see Documentation/vm/hugepage-mmap.c + * hugepage-shm: see tools/testing/selftests/vm/hugepage-shm.c + */ + +******************************************************************* + +/* + * hugepage-mmap: see tools/testing/selftests/vm/hugepage-mmap.c */ diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt index fa206cccf89f8577a8a44ff84d0836b06b712cb5..a68db7692ee8f96e9cf2092510fd1b5be903a497 100644 --- a/Documentation/vm/unevictable-lru.txt +++ b/Documentation/vm/unevictable-lru.txt @@ -197,12 +197,8 @@ the pages are also "rescued" from the unevictable list in the process of freeing them. page_evictable() also checks for mlocked pages by testing an additional page -flag, PG_mlocked (as wrapped by PageMlocked()). If the page is NOT mlocked, -and a non-NULL VMA is supplied, page_evictable() will check whether the VMA is -VM_LOCKED via is_mlocked_vma(). is_mlocked_vma() will SetPageMlocked() and -update the appropriate statistics if the vma is VM_LOCKED. This method allows -efficient "culling" of pages in the fault path that are being faulted in to -VM_LOCKED VMAs. +flag, PG_mlocked (as wrapped by PageMlocked()), which is set when a page is +faulted into a VM_LOCKED vma, or found in a vma being VM_LOCKED. VMSCAN'S HANDLING OF UNEVICTABLE PAGES @@ -371,8 +367,8 @@ mlock_fixup() filters several classes of "special" VMAs: mlock_fixup() will call make_pages_present() in the hugetlbfs VMA range to allocate the huge pages and populate the ptes. -3) VMAs with VM_DONTEXPAND or VM_RESERVED are generally userspace mappings of - kernel pages, such as the VDSO page, relay channel pages, etc. These pages +3) VMAs with VM_DONTEXPAND are generally userspace mappings of kernel pages, + such as the VDSO page, relay channel pages, etc. These pages are inherently unevictable and are not managed on the LRU lists. mlock_fixup() treats these VMAs the same as hugetlbfs VMAs. It calls make_pages_present() to populate the ptes. @@ -651,7 +647,7 @@ PAGE RECLAIM IN shrink_*_list() ------------------------------- shrink_active_list() culls any obviously unevictable pages - i.e. -!page_evictable(page, NULL) - diverting these to the unevictable list. +!page_evictable(page) - diverting these to the unevictable list. However, shrink_active_list() only sees unevictable pages that made it onto the active/inactive lru lists. Note that these pages do not have PageUnevictable set - otherwise they would be on the unevictable list and shrink_active_list diff --git a/Documentation/w1/slaves/w1_therm b/Documentation/w1/slaves/w1_therm index 0403aaaba878edd18473ef7a536b38cfac4784c5..874a8ca93feb95c9783d9a41b3f89136b7485516 100644 --- a/Documentation/w1/slaves/w1_therm +++ b/Documentation/w1/slaves/w1_therm @@ -3,6 +3,7 @@ Kernel driver w1_therm Supported chips: * Maxim ds18*20 based temperature sensors. + * Maxim ds1825 based temperature sensors. Author: Evgeniy Polyakov @@ -15,6 +16,7 @@ supported family codes: W1_THERM_DS18S20 0x10 W1_THERM_DS1822 0x22 W1_THERM_DS18B20 0x28 +W1_THERM_DS1825 0x3B Support is provided through the sysfs w1_slave file. Each open and read sequence will initiate a temperature conversion then provide two diff --git a/Documentation/watchdog/src/watchdog-test.c b/Documentation/watchdog/src/watchdog-test.c index 73ff5cc93e05db4c93321464cb8ae948571a18fe..3da822967ee0e13d1a2dbcd88d2d75f5a4aca370 100644 --- a/Documentation/watchdog/src/watchdog-test.c +++ b/Documentation/watchdog/src/watchdog-test.c @@ -31,7 +31,7 @@ static void keep_alive(void) * or "-e" to enable the card. */ -void term(int sig) +static void term(int sig) { close(fd); fprintf(stderr, "Stopping watchdog ticks...\n"); diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt index c54b4f503e2a00e0d45a6ae7ae92533b5d3468af..de38429beb719e66617c2b256de863d2a7f322c6 100644 --- a/Documentation/x86/x86_64/boot-options.txt +++ b/Documentation/x86/x86_64/boot-options.txt @@ -50,6 +50,13 @@ Machine check monarchtimeout: Sets the time in us to wait for other CPUs on machine checks. 0 to disable. + mce=bios_cmci_threshold + Don't overwrite the bios-set CMCI threshold. This boot option + prevents Linux from overwriting the CMCI threshold set by the + bios. Without this option, Linux always sets the CMCI + threshold to 1. Enabling this may make memory predictive failure + analysis less effective if the bios sets thresholds for memory + errors since we will not see details for all errors. nomce (for compatibility with i386): same as mce=off diff --git a/Documentation/zh_CN/arm/Booting b/Documentation/zh_CN/arm/Booting new file mode 100644 index 0000000000000000000000000000000000000000..6158a64df80c5147f2b1c516bf7fa7caa8a9361d --- /dev/null +++ b/Documentation/zh_CN/arm/Booting @@ -0,0 +1,175 @@ +Chinese translated version of Documentation/arm/Booting + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Maintainer: Russell King +Chinese maintainer: Fu Wei +--------------------------------------------------------------------- +Documentation/arm/Booting 的中文翻译 + +如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 +交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题，请联系中文版维护者。 + +英文版维护者： Russell King +中文版维护者： 傅炜 Fu Wei +中文版翻译者： 傅炜 Fu Wei +中文版校译者： 傅炜 Fu Wei + +以下为正文 +--------------------------------------------------------------------- + + 启动 ARM Linux + ============== + +作者：Russell King +日期：2002年5月18日 + +以下文档适用于 2.4.18-rmk6 及以上版本。 + +为了启动 ARM Linux，你需要一个引导装载程序（boot loader）， +它是一个在主内核启动前运行的一个小程序。引导装载程序需要初始化各种 +设备，并最终调用 Linux 内核，将信息传递给内核。 + +从本质上讲，引导装载程序应提供（至少）以下功能： + +1、设置和初始化 RAM。 +2、初始化一个串口。 +3、检测机器的类型（machine type）。 +4、设置内核标签列表（tagged list）。 +5、调用内核映像。 + + +1、设置和初始化 RAM +------------------- + +现有的引导加载程序: 强制 +新开发的引导加载程序: 强制 + +引导装载程序应该找到并初始化系统中所有内核用于保持系统变量数据的 RAM。 +这个操作的执行是设备依赖的。（它可能使用内部算法来自动定位和计算所有 +RAM，或可能使用对这个设备已知的 RAM 信息，还可能使用任何引导装载程序 +设计者想到的匹配方法。） + + +2、初始化一个串口 +----------------------------- + +现有的引导加载程序: 可选、建议 +新开发的引导加载程序: 可选、建议 + +引导加载程序应该初始化并使能一个目标板上的串口。这允许内核串口驱动 +自动检测哪个串口用于内核控制台。(一般用于调试或与目标板通信。) + +作为替代方案，引导加载程序也可以通过标签列表传递相关的'console=' +选项给内核以指定某个串口，而串口数据格式的选项在以下文档中描述： + + Documentation/kernel-parameters.txt。 + + +3、检测机器类型 +-------------------------- + +现有的引导加载程序: 可选 +新开发的引导加载程序: 强制 + +引导加载程序应该通过某些方式检测自身所处的机器类型。这是一个硬件 +代码或通过查看所连接的硬件用某些算法得到，这些超出了本文档的范围。 +引导加载程序最终必须能提供一个 MACH_TYPE_xxx 值给内核。 +(详见 linux/arch/arm/tools/mach-types )。 + +4、设置启动数据 +------------------ + +现有的引导加载程序: 可选、强烈建议 +新开发的引导加载程序: 强制 + +引导加载程序必须提供标签列表或者 dtb 映像以传递配置数据给内核。启动 +数据的物理地址通过寄存器 r2 传递给内核。 + +4a、设置内核标签列表 +-------------------------------- + +bootloader 必须创建和初始化内核标签列表。一个有效的标签列表以 +ATAG_CORE 标签开始，并以 ATAG_NONE 标签结束。ATAG_CORE 标签可以是 +空的，也可以是非空。一个空 ATAG_CORE 标签其 size 域设置为 +‘2’(0x00000002)。ATAG_NONE 标签的 size 域必须设置为零。 + +在列表中可以保存任意数量的标签。对于一个重复的标签是追加到之前标签 +所携带的信息之后，还是会覆盖原来的信息，是未定义的。某些标签的行为 +是前者，其他是后者。 + +bootloader 必须传递一个系统内存的位置和最小值，以及根文件系统位置。 +因此，最小的标签列表如下所示： + + +-----------+ +基地址 -> | ATAG_CORE | | + +-----------+ | + | ATAG_MEM | | 地址增长方向 + +-----------+ | + | ATAG_NONE | | + +-----------+ v + +标签列表应该保存在系统的 RAM 中。 + +标签列表必须置于内核自解压和 initrd'bootp' 程序都不会覆盖的内存区。 +建议放在 RAM 的头 16KiB 中。 + +4b、设置设备树 +------------------------- + +bootloader 必须以 64bit 地址对齐的形式加载一个设备树映像(dtb)到系统 +RAM 中，并用启动数据初始化它。dtb 格式在文档 +Documentation/devicetree/booting-without-of.txt 中。内核将会在 +dtb 物理地址处查找 dtb 魔数值（0xd00dfeed），以确定 dtb 是否已经代替 +标签列表被传递进来。 + +bootloader 必须传递一个系统内存的位置和最小值，以及根文件系统位置。 +dtb 必须置于内核自解压不会覆盖的内存区。建议将其放置于 RAM 的头 16KiB +中。但是不可将其放置于“0”物理地址处，因为内核认为：r2 中为 0，意味着 +没有标签列表和 dtb 传递过来。 + +5、调用内核映像 +--------------------------- + +现有的引导加载程序: 强制 +新开发的引导加载程序: 强制 + +调用内核映像 zImage 有两个选择。如果 zImge 保存在 flash 中，且是为了 +在 flash 中直接运行而被正确链接的。这样引导加载程序就可以在 flash 中 +直接调用 zImage。 + +zImage 也可以被放在系统 RAM（任意位置）中被调用。注意：内核使用映像 +基地址的前 16KB RAM 空间来保存页表。建议将映像置于 RAM 的 32KB 处。 + +对于以上任意一种情况，都必须符合以下启动状态： + +- 停止所有 DMA 设备，这样内存数据就不会因为虚假网络包或磁盘数据而被破坏。 + 这可能可以节省你许多的调试时间。 + +- CPU 寄存器配置 + r0 = 0， + r1 = （在上面 3 中获取的）机器类型码。 + r2 = 标签列表在系统 RAM 中的物理地址，或 + 设备树块(dtb)在系统 RAM 中的物理地址 + +- CPU 模式 + 所有形式的中断必须被禁止 (IRQs 和 FIQs) + CPU 必须处于 SVC 模式。(对于 Angel 调试有特例存在) + +- 缓存，MMUs + MMU 必须关闭。 + 指令缓存开启或关闭都可以。 + 数据缓存必须关闭。 + +- 引导加载程序应该通过直接跳转到内核映像的第一条指令来调用内核映像。 + + 对于支持 ARM 指令集的 CPU，跳入内核入口时必须处在 ARM 状态，即使 + 对于 Thumb-2 内核也是如此。 + + 对于仅支持 Thumb 指令集的 CPU，比如 Cortex-M 系列的 CPU，跳入 + 内核入口时必须处于 Thumb 状态。 diff --git a/Documentation/zh_CN/basic_profiling.txt b/Documentation/zh_CN/basic_profiling.txt new file mode 100644 index 0000000000000000000000000000000000000000..1e6bf0bdf8f54a017e1c98514a8ff0641d98c707 --- /dev/null +++ b/Documentation/zh_CN/basic_profiling.txt @@ -0,0 +1,71 @@ +Chinese translated version of Documentation/basic_profiling + +If you have any comment or update to the content, please post to LKML directly. +However, if you have problem communicating in English you can also ask the +Chinese maintainer for help. Contact the Chinese maintainer, if this +translation is outdated or there is problem with translation. + +Chinese maintainer: Liang Xie +--------------------------------------------------------------------- +Documentation/basic_profiling的中文翻译 + +如果想评论或更新本文的内容，请直接发信到LKML。如果你使用英文交流有困难的话，也可 +以向中文版维护者求助。如果本翻译更新不及时或者翻译存在问题，请联系中文版维护者。 + +中文版维护者： 谢良 Liang Xie +中文版翻译者： 谢良 Liang Xie +中文版校译者： +以下为正文 +--------------------------------------------------------------------- + +下面这些说明指令都是非常基础的，如果你想进一步了解请阅读相关专业文档：） +请不要再在本文档增加新的内容，但可以修复文档中的错误：）(mbligh@aracnet.com) +感谢John Levon，Dave Hansen等在撰写时的帮助 + + 用于表示要测量的目标 +请先确保您已经有正确的System.map / vmlinux配置！ + +对于linux系统来说，配置vmlinuz最容易的方法可能就是使用“make install”，然后修改 +/sbin/installkernel将vmlinux拷贝到/boot目录，而System.map通常是默认安装好的 + +Readprofile +----------- +2.6系列内核需要版本相对较新的readprofile，比如util-linux 2.12a中包含的，可以从: + +http://www.kernel.org/pub/linux/utils/util-linux/ 下载 + +大部分linux发行版已经包含了. + +启用readprofile需要在kernel启动命令行增加”profile=2“ + +clear readprofile -r + +dump output readprofile -m /boot/System.map > captured_profile + +Oprofile +-------- + +从http://oprofile.sourceforge.net/获取源代码（请参考Changes以获取匹配的版本） +在kernel启动命令行增加“idle=poll” + +配置CONFIG_PROFILING=y和CONFIG_OPROFILE=y然后重启进入新kernel + +./configure --with-kernel-support +make install + +想得到好的测量结果，请确保启用了本地APIC特性。如果opreport显示有0Hz CPU， +说明APIC特性没有开启。另外注意idle=poll选项可能有损性能。 + +One time setup: + opcontrol --setup --vmlinux=/boot/vmlinux + +clear opcontrol --reset +start opcontrol --start + +stop opcontrol --stop +dump output opreport > output_file + +如果只看kernel相关的报告结果，请运行命令 opreport -l /boot/vmlinux > output_file + +通过reset选项可以清理过期统计数据，相当于重启的效果。 + diff --git a/Documentation/zh_CN/filesystems/sysfs.txt b/Documentation/zh_CN/filesystems/sysfs.txt new file mode 100644 index 0000000000000000000000000000000000000000..e230eaa331226901582f33d030af73499a9b9f5d --- /dev/null +++ b/Documentation/zh_CN/filesystems/sysfs.txt @@ -0,0 +1,372 @@ +Chinese translated version of Documentation/filesystems/sysfs.txt + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Maintainer: Patrick Mochel + Mike Murphy +Chinese maintainer: Fu Wei +--------------------------------------------------------------------- +Documentation/filesystems/sysfs.txt 的中文翻译 + +如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 +交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题，请联系中文版维护者。 +英文版维护者： Patrick Mochel + Mike Murphy +中文版维护者： 傅炜 Fu Wei +中文版翻译者： 傅炜 Fu Wei +中文版校译者： 傅炜 Fu Wei + + +以下为正文 +--------------------------------------------------------------------- +sysfs - 用于导出内核对象(kobject)的文件系统 + +Patrick Mochel +Mike Murphy + +修订: 16 August 2011 +原始版本: 10 January 2003 + + +sysfs 简介: +~~~~~~~~~~ + +sysfs 是一个最初基于 ramfs 且位于内存的文件系统。它提供导出内核 +数据结构及其属性，以及它们之间的关联到用户空间的方法。 + +sysfs 始终与 kobject 的底层结构紧密相关。请阅读 +Documentation/kobject.txt 文档以获得更多关于 kobject 接口的 +信息。 + + +使用 sysfs +~~~~~~~~~~~ + +只要内核配置中定义了 CONFIG_SYSFS ，sysfs 总是被编译进内核。你可 +通过以下命令挂载它: + + mount -t sysfs sysfs /sys + + +创建目录 +~~~~~~~~ + +任何 kobject 在系统中注册，就会有一个目录在 sysfs 中被创建。这个 +目录是作为该 kobject 的父对象所在目录的子目录创建的，以准确地传递 +内核的对象层次到用户空间。sysfs 中的顶层目录代表着内核对象层次的 +共同祖先；例如：某些对象属于某个子系统。 + +Sysfs 在与其目录关联的 sysfs_dirent 对象中内部保存一个指向实现 +目录的 kobject 的指针。以前，这个 kobject 指针被 sysfs 直接用于 +kobject 文件打开和关闭的引用计数。而现在的 sysfs 实现中，kobject +引用计数只能通过 sysfs_schedule_callback() 函数直接修改。 + + +属性 +~~~~ + +kobject 的属性可在文件系统中以普通文件的形式导出。Sysfs 为属性定义 +了面向文件 I/O 操作的方法，以提供对内核属性的读写。 + + +属性应为 ASCII 码文本文件。以一个文件只存储一个属性值为宜。但一个 +文件只包含一个属性值可能影响效率，所以一个包含相同数据类型的属性值 +数组也被广泛地接受。 + +混合类型、表达多行数据以及一些怪异的数据格式会遭到强烈反对。这样做是 +很丢脸的,而且其代码会在未通知作者的情况下被重写。 + + +一个简单的属性结构定义如下: + +struct attribute { + char * name; + struct module *owner; + umode_t mode; +}; + + +int sysfs_create_file(struct kobject * kobj, const struct attribute * attr); +void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr); + + +一个单独的属性结构并不包含读写其属性值的方法。子系统最好为增删特定 +对象类型的属性定义自己的属性结构体和封装函数。 + +例如:驱动程序模型定义的 device_attribute 结构体如下: + +struct device_attribute { + struct attribute attr; + ssize_t (*show)(struct device *dev, struct device_attribute *attr, + char *buf); + ssize_t (*store)(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); +}; + +int device_create_file(struct device *, const struct device_attribute *); +void device_remove_file(struct device *, const struct device_attribute *); + +为了定义设备属性，同时定义了一下辅助宏: + +#define DEVICE_ATTR(_name, _mode, _show, _store) \ +struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store) + +例如:声明 + +static DEVICE_ATTR(foo, S_IWUSR | S_IRUGO, show_foo, store_foo); + +等同于如下代码： + +static struct device_attribute dev_attr_foo = { + .attr = { + .name = "foo", + .mode = S_IWUSR | S_IRUGO, + .show = show_foo, + .store = store_foo, + }, +}; + + +子系统特有的回调函数 +~~~~~~~~~~~~~~~~~~~ + +当一个子系统定义一个新的属性类型时，必须实现一系列的 sysfs 操作， +以帮助读写调用实现属性所有者的显示和储存方法。 + +struct sysfs_ops { + ssize_t (*show)(struct kobject *, struct attribute *, char *); + ssize_t (*store)(struct kobject *, struct attribute *, const char *, size_t); +}; + +[子系统应已经定义了一个 struct kobj_type 结构体作为这个类型的 +描述符，并在此保存 sysfs_ops 的指针。更多的信息参见 kobject 的 +文档] + +sysfs 会为这个类型调用适当的方法。当一个文件被读写时，这个方法会 +将一般的kobject 和 attribute 结构体指针转换为适当的指针类型后 +调用相关联的函数。 + + +示例: + +#define to_dev(obj) container_of(obj, struct device, kobj) +#define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr) + +static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr, + char *buf) +{ + struct device_attribute *dev_attr = to_dev_attr(attr); + struct device *dev = to_dev(kobj); + ssize_t ret = -EIO; + + if (dev_attr->show) + ret = dev_attr->show(dev, dev_attr, buf); + if (ret >= (ssize_t)PAGE_SIZE) { + print_symbol("dev_attr_show: %s returned bad count\n", + (unsigned long)dev_attr->show); + } + return ret; +} + + + +读写属性数据 +~~~~~~~~~~~~ + +在声明属性时，必须指定 show() 或 store() 方法，以实现属性的 +读或写。这些方法的类型应该和以下的设备属性定义一样简单。 + +ssize_t (*show)(struct device *dev, struct device_attribute *attr, char *buf); +ssize_t (*store)(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); + +也就是说,他们应只以一个处理对象、一个属性和一个缓冲指针作为参数。 + +sysfs 会分配一个大小为 (PAGE_SIZE) 的缓冲区并传递给这个方法。 +Sysfs 将会为每次读写操作调用一次这个方法。这使得这些方法在执行时 +会出现以下的行为: + +- 在读方面（read(2)），show() 方法应该填充整个缓冲区。回想属性 + 应只导出了一个属性值或是一个同类型属性值的数组，所以这个代价将 + 不会不太高。 + + 这使得用户空间可以局部地读和任意的向前搜索整个文件。如果用户空间 + 向后搜索到零或使用‘0’偏移执行一个pread(2)操作，show()方法将 + 再次被调用，以重新填充缓存。 + +- 在写方面（write(2)），sysfs 希望在第一次写操作时得到整个缓冲区。 + 之后 Sysfs 传递整个缓冲区给 store() 方法。 + + 当要写 sysfs 文件时，用户空间进程应首先读取整个文件，修该想要 + 改变的值，然后回写整个缓冲区。 + + 在读写属性值时，属性方法的执行应操作相同的缓冲区。 + +注记: + +- 写操作导致的 show() 方法重载，会忽略当前文件位置。 + +- 缓冲区应总是 PAGE_SIZE 大小。对于i386，这个值为4096。 + +- show() 方法应该返回写入缓冲区的字节数，也就是 snprintf()的 + 返回值。 + +- show() 应始终使用 snprintf()。 + +- store() 应返回缓冲区的已用字节数。如果整个缓存都已填满，只需返回 + count 参数。 + +- show() 或 store() 可以返回错误值。当得到一个非法值，必须返回一个 + 错误值。 + +- 一个传递给方法的对象将会通过 sysfs 调用对象内嵌的引用计数固定在 + 内存中。尽管如此，对象代表的物理实体(如设备)可能已不存在。如有必要， + 应该实现一个检测机制。 + +一个简单的(未经实验证实的)设备属性实现如下： + +static ssize_t show_name(struct device *dev, struct device_attribute *attr, + char *buf) +{ + return scnprintf(buf, PAGE_SIZE, "%s\n", dev->name); +} + +static ssize_t store_name(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + snprintf(dev->name, sizeof(dev->name), "%.*s", + (int)min(count, sizeof(dev->name) - 1), buf); + return count; +} + +static DEVICE_ATTR(name, S_IRUGO, show_name, store_name); + + +（注意：真正的实现不允许用户空间设置设备名。） + +顶层目录布局 +~~~~~~~~~~~~ + +sysfs 目录的安排显示了内核数据结构之间的关系。 + +顶层 sysfs 目录如下: + +block/ +bus/ +class/ +dev/ +devices/ +firmware/ +net/ +fs/ + +devices/ 包含了一个设备树的文件系统表示。他直接映射了内部的内核 +设备树，反映了设备的层次结构。 + +bus/ 包含了内核中各种总线类型的平面目录布局。每个总线目录包含两个 +子目录: + + devices/ + drivers/ + +devices/ 包含了系统中出现的每个设备的符号链接，他们指向 root/ 下的 +设备目录。 + +drivers/ 包含了每个已为特定总线上的设备而挂载的驱动程序的目录(这里 +假定驱动没有跨越多个总线类型)。 + +fs/ 包含了一个为文件系统设立的目录。现在每个想要导出属性的文件系统必须 +在 fs/ 下创建自己的层次结构(参见Documentation/filesystems/fuse.txt)。 + +dev/ 包含两个子目录： char/ 和 block/。在这两个子目录中，有以 +: 格式命名的符号链接。这些符号链接指向 sysfs 目录 +中相应的设备。/sys/dev 提供一个通过一个 stat(2) 操作结果，查找 +设备 sysfs 接口快捷的方法。 + +更多有关 driver-model 的特性信息可以在 Documentation/driver-model/ +中找到。 + + +TODO: 完成这一节。 + + +当前接口 +~~~~~~~~ + +以下的接口层普遍存在于当前的sysfs中: + +- 设备 (include/linux/device.h) +---------------------------------- +结构体: + +struct device_attribute { + struct attribute attr; + ssize_t (*show)(struct device *dev, struct device_attribute *attr, + char *buf); + ssize_t (*store)(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count); +}; + +声明: + +DEVICE_ATTR(_name, _mode, _show, _store); + +增/删属性: + +int device_create_file(struct device *dev, const struct device_attribute * attr); +void device_remove_file(struct device *dev, const struct device_attribute * attr); + + +- 总线驱动程序 (include/linux/device.h) +-------------------------------------- +结构体: + +struct bus_attribute { + struct attribute attr; + ssize_t (*show)(struct bus_type *, char * buf); + ssize_t (*store)(struct bus_type *, const char * buf, size_t count); +}; + +声明: + +BUS_ATTR(_name, _mode, _show, _store) + +增/删属性: + +int bus_create_file(struct bus_type *, struct bus_attribute *); +void bus_remove_file(struct bus_type *, struct bus_attribute *); + + +- 设备驱动程序 (include/linux/device.h) +----------------------------------------- + +结构体: + +struct driver_attribute { + struct attribute attr; + ssize_t (*show)(struct device_driver *, char * buf); + ssize_t (*store)(struct device_driver *, const char * buf, + size_t count); +}; + +声明: + +DRIVER_ATTR(_name, _mode, _show, _store) + +增/删属性： + +int driver_create_file(struct device_driver *, const struct driver_attribute *); +void driver_remove_file(struct device_driver *, const struct driver_attribute *); + + +文档 +~~~~ + +sysfs 目录结构以及其中包含的属性定义了一个内核与用户空间之间的 ABI。 +对于任何 ABI，其自身的稳定和适当的文档是非常重要的。所有新的 sysfs +属性必须在 Documentation/ABI 中有文档。详见 Documentation/ABI/README。 diff --git a/Documentation/zh_CN/gpio.txt b/Documentation/zh_CN/gpio.txt new file mode 100644 index 0000000000000000000000000000000000000000..4fa7b4e6f856ab163f7403b8c0a3aceb57ce9764 --- /dev/null +++ b/Documentation/zh_CN/gpio.txt @@ -0,0 +1,658 @@ +Chinese translated version of Documentation/gpio.txt + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Maintainer: Grant Likely + Linus Walleij +Chinese maintainer: Fu Wei +--------------------------------------------------------------------- +Documentation/gpio.txt 的中文翻译 + +如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 +交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题，请联系中文版维护者。 +英文版维护者： Grant Likely + Linus Walleij +中文版维护者： 傅炜 Fu Wei +中文版翻译者： 傅炜 Fu Wei +中文版校译者： 傅炜 Fu Wei + + +以下为正文 +--------------------------------------------------------------------- +GPIO 接口 + +本文档提供了一个在Linux下访问GPIO的公约概述。 + +这些函数以 gpio_* 作为前缀。其他的函数不允许使用这样的前缀或相关的 +__gpio_* 前缀。 + + +什么是GPIO? +========== +"通用输入/输出口"(GPIO)是一个灵活的由软件控制的数字信号。他们可 +由多种芯片提供,且对于从事嵌入式和定制硬件的 Linux 开发者来说是 +比较熟悉。每个GPIO 都代表一个连接到特定引脚或球栅阵列(BGA)封装中 +“球珠”的一个位。电路板原理图显示了 GPIO 与外部硬件的连接关系。 +驱动可以编写成通用代码，以使板级启动代码可传递引脚配置数据给驱动。 + +片上系统 (SOC) 处理器对 GPIO 有很大的依赖。在某些情况下,每个 +非专用引脚都可配置为 GPIO,且大多数芯片都最少有一些 GPIO。 +可编程逻辑器件(类似 FPGA) 可以方便地提供 GPIO。像电源管理和 +音频编解码器这样的多功能芯片经常留有一些这样的引脚来帮助那些引脚 +匮乏的 SOC。同时还有通过 I2C 或 SPI 串行总线连接的“GPIO扩展器” +芯片。大多数 PC 的南桥有一些拥有 GPIO 能力的引脚 (只有BIOS +固件才知道如何使用他们)。 + +GPIO 的实际功能因系统而异。通常用法有: + + - 输出值可写 (高电平=1，低电平=0)。一些芯片也有如何驱动这些值的选项, + 例如只允许输出一个值、支持“线与”及其他取值类似的模式(值得注意的是 + “开漏”信号) + + - 输入值可读(1、0)。一些芯片支持引脚在配置为“输出”时回读，这对于类似 + “线与”的情况(以支持双向信号)是非常有用的。GPIO 控制器可能有输入 + 去毛刺/消抖逻辑,这有时需要软件控制。 + + - 输入通常可作为 IRQ 信号,一般是沿触发,但有时是电平触发。这样的 IRQ + 可能配置为系统唤醒事件,以将系统从低功耗状态下唤醒。 + + - 通常一个 GPIO 根据不同产品电路板的需求,可以配置为输入或输出,也有仅 + 支持单向的。 + + - 大部分 GPIO 可以在持有自旋锁时访问,但是通常由串行总线扩展的 GPIO + 不允许持有自旋锁。但某些系统也支持这种类型。 + +对于给定的电路板,每个 GPIO 都用于某个特定的目的,如监控 MMC/SD 卡的 +插入/移除、检测卡的写保护状态、驱动 LED、配置收发器、模拟串行总线、 +复位硬件看门狗、感知开关状态等等。 + + +GPIO 公约 +========= +注意,这个叫做“公约”，因为这不是强制性的，不遵循这个公约是无伤大雅的， +因为此时可移植性并不重要。GPIO 常用于板级特定的电路逻辑,甚至可能 +随着电路板的版本而改变，且不可能在不同走线的电路板上使用。仅有在少数 +功能上才具有可移植性，其他功能是平台特定。这也是由于“胶合”的逻辑造成的。 + +此外，这不需要任何的执行框架，只是一个接口。某个平台可能通过一个简单地 +访问芯片寄存器的内联函数来实现它，其他平台可能通过委托一系列不同的GPIO +控制器的抽象函数来实现它。(有一些可选的代码能支持这种策略的实现,本文档 +后面会介绍，但作为 GPIO 接口的客户端驱动程序必须与它的实现无关。) + +也就是说,如果在他们的平台上支持这个公约，驱动应尽可能的使用它。平台 +必须在 Kconfig 中声明对 GENERIC_GPIO的支持 (布尔型 true)，并提供 +一个 文件。那些调用标准 GPIO 函数的驱动应该在 Kconfig +入口中声明依赖GENERIC_GPIO。当驱动包含文件: + + #include + +则 GPIO 函数是可用,无论是“真实代码”还是经优化过的语句。如果你遵守 +这个公约，当你的代码完成后，对其他的开发者来说会更容易看懂和维护。 + +注意，这些操作包含所用平台的 I/O 屏障代码，驱动无须显式地调用他们。 + + +标识 GPIO +--------- +GPIO 是通过无符号整型来标识的,范围是 0 到 MAX_INT。保留“负”数 +用于其他目的,例如标识信号“在这个板子上不可用”或指示错误。未接触底层 +硬件的代码会忽略这些整数。 + +平台会定义这些整数的用法,且通常使用 #define 来定义 GPIO，这样 +板级特定的启动代码可以直接关联相应的原理图。相对来说，驱动应该仅使用 +启动代码传递过来的 GPIO 编号，使用 platform_data 保存板级特定 +引脚配置数据 (同时还有其他须要的板级特定数据)，避免可能出现的问题。 + +例如一个平台使用编号 32-159 来标识 GPIO,而在另一个平台使用编号0-63 +标识一组 GPIO 控制器,64-79标识另一类 GPIO 控制器,且在一个含有 +FPGA 的特定板子上使用 80-95。编号不一定要连续,那些平台中，也可以 +使用编号2000-2063来标识一个 I2C 接口的 GPIO 扩展器中的 GPIO。 + +如果你要初始化一个带有无效 GPIO 编号的结构体,可以使用一些负编码 +(如"-EINVAL")，那将使其永远不会是有效。来测试这样一个结构体中的编号 +是否关联一个 GPIO，你可使用以下断言: + + int gpio_is_valid(int number); + +如果编号不存在，则请求和释放 GPIO 的函数将拒绝执行相关操作(见下文)。 +其他编号也可能被拒绝,比如一个编号可能存在，但暂时在给定的电路上不可用。 + +一个平台是否支持多个 GPIO 控制器为平台特定的实现问题，就像是否可以 +在 GPIO 编号空间中有“空洞”和是否可以在运行时添加新的控制器一样。 +这些问题会影响其他事情，包括相邻的 GPIO 编号是否存在等。 + +使用 GPIO +--------- +对于一个 GPIO，系统应该做的第一件事情就是通过 gpio_request() +函数分配它，见下文。 + +接下来是设置I/O方向，这通常是在板级启动代码中为所使用的 GPIO 设置 +platform_device 时完成。 + + /* 设置为输入或输出, 返回 0 或负的错误代码 */ + int gpio_direction_input(unsigned gpio); + int gpio_direction_output(unsigned gpio, int value); + +返回值为零代表成功，否则返回一个负的错误代码。这个返回值需要检查，因为 +get/set(获取/设置)函数调用没法返回错误,且有可能是配置错误。通常， +你应该在进程上下文中调用这些函数。然而,对于自旋锁安全的 GPIO，在板子 +启动的早期、进程启动前使用他们也是可以的。 + +对于作为输出的 GPIO，为其提供初始输出值，对于避免在系统启动期间出现 +信号毛刺是很有帮助的。 + +为了与传统的 GPIO 接口兼容, 在设置一个 GPIO 方向时，如果它还未被申请， +则隐含了申请那个 GPIO 的操作(见下文)。这种兼容性正在从可选的 gpiolib +框架中移除。 + +如果这个 GPIO 编码不存在，或者特定的 GPIO 不能用于那种模式，则方向 +设置可能失败。依赖启动固件来正确地设置方向通常是一个坏主意，因为它可能 +除了启动Linux，并没有做更多的验证工作。(同理, 板子的启动代码可能需要 +将这个复用的引脚设置为 GPIO，并正确地配置上拉/下拉电阻。) + + +访问自旋锁安全的 GPIO +------------------- +大多数 GPIO 控制器可以通过内存读/写指令来访问。这些指令不会休眠,可以 +安全地在硬(非线程)中断例程和类似的上下文中完成。 + +对于那些用 gpio_cansleep()测试总是返回失败的 GPIO(见下文)，使用 +以下的函数访问: + + /* GPIO 输入:返回零或非零 */ + int gpio_get_value(unsigned gpio); + + /* GPIO 输出 */ + void gpio_set_value(unsigned gpio, int value); + +GPIO值是布尔值，零表示低电平，非零表示高电平。当读取一个输出引脚的值时， +返回值应该是引脚上的值。这个值不总是和输出值相符，因为存在开漏输出信号和 +输出延迟问题。 + +以上的 get/set 函数无错误返回值，因为之前 gpio_direction_*()应已检查过 +其是否为“无效GPIO”。此外，还需要注意的是并不是所有平台都可以从输出引脚 +中读取数据，对于不能读取的引脚应总返回零。另外，对那些在原子上下文中无法 +安全访问的 GPIO (译者注：因为访问可能导致休眠)使用这些函数是不合适的 +(见下文)。 + +在 GPIO 编号(还有输出、值)为常数的情况下,鼓励通过平台特定的实现来优化 +这两个函数来访问 GPIO 值。这种情况(读写一个硬件寄存器)下只需要几条指令 +是很正常的,且无须自旋锁。这种优化函数比起那些在子程序上花费许多指令的 +函数可以使得模拟接口(译者注:例如 GPIO 模拟 I2C、1-wire 或 SPI)的 +应用(在空间和时间上都)更具效率。 + + +访问可能休眠的 GPIO +----------------- +某些 GPIO 控制器必须通过基于总线(如 I2C 或 SPI)的消息访问。读或写这些 +GPIO 值的命令需要等待其信息排到队首才发送命令，再获得其反馈。期间需要 +休眠，这不能在 IRQ 例程(中断上下文)中执行。 + +支持此类 GPIO 的平台通过以下函数返回非零值来区分出这种 GPIO。(此函数需要 +一个之前通过 gpio_request 分配到的有效 GPIO 编号): + + int gpio_cansleep(unsigned gpio); + +为了访问这种 GPIO,内核定义了一套不同的函数: + + /* GPIO 输入:返回零或非零 ,可能会休眠 */ + int gpio_get_value_cansleep(unsigned gpio); + + /* GPIO 输出,可能会休眠 */ + void gpio_set_value_cansleep(unsigned gpio, int value); + + +访问这样的 GPIO 需要一个允许休眠的上下文，例如线程 IRQ 处理例程，并用以上的 +访问函数替换那些没有 cansleep()后缀的自旋锁安全访问函数。 + +除了这些访问函数可能休眠，且它们操作的 GPIO 不能在硬件 IRQ 处理例程中访问的 +事实，这些处理例程实际上和自旋锁安全的函数是一样的。 + +** 除此之外 ** 调用设置和配置此类 GPIO 的函数也必须在允许休眠的上下文中， +因为它们可能也需要访问 GPIO 控制器芯片: (这些设置函数通常在板级启动代码或者 +驱动探测/断开代码中，所以这是一个容易满足的约束条件。) + + gpio_direction_input() + gpio_direction_output() + gpio_request() + +## gpio_request_one() +## gpio_request_array() +## gpio_free_array() + + gpio_free() + gpio_set_debounce() + + + +声明和释放 GPIO +---------------------------- +为了有助于捕获系统配置错误,定义了两个函数。 + + /* 申请 GPIO, 返回 0 或负的错误代码. + * 非空标签可能有助于诊断. + */ + int gpio_request(unsigned gpio, const char *label); + + /* 释放之前声明的 GPIO */ + void gpio_free(unsigned gpio); + +将无效的 GPIO 编码传递给 gpio_request()会导致失败，申请一个已使用这个 +函数声明过的 GPIO 也会失败。gpio_request()的返回值必须检查。你应该在 +进程上下文中调用这些函数。然而,对于自旋锁安全的 GPIO,在板子启动的早期、 +进入进程之前是可以申请的。 + +这个函数完成两个基本的目标。一是标识那些实际上已作为 GPIO 使用的信号线， +这样便于更好地诊断;系统可能需要服务几百个可用的 GPIO，但是对于任何一个 +给定的电路板通常只有一些被使用。另一个目的是捕获冲突，查明错误:如两个或 +更多驱动错误地认为他们已经独占了某个信号线,或是错误地认为移除一个管理着 +某个已激活信号的驱动是安全的。也就是说，申请 GPIO 的作用类似一种锁机制。 + +某些平台可能也使用 GPIO 作为电源管理激活信号(例如通过关闭未使用芯片区和 +简单地关闭未使用时钟)。 + +对于 GPIO 使用 pinctrl 子系统已知的引脚，子系统应该被告知其使用情况； +一个 gpiolib 驱动的 .request()操作应调用 pinctrl_request_gpio()， +而 gpiolib 驱动的 .free()操作应调用 pinctrl_free_gpio()。pinctrl +子系统允许 pinctrl_request_gpio()在某个引脚或引脚组以复用形式“属于” +一个设备时都成功返回。 + +任何须将 GPIO 信号导向适当引脚的引脚复用硬件的编程应该发生在 GPIO +驱动的 .direction_input()或 .direction_output()函数中，以及 +任何输出 GPIO 值的设置之后。这样可使从引脚特殊功能到 GPIO 的转换 +不会在引脚产生毛刺波形。有时当用一个 GPIO 实现其信号驱动一个非 GPIO +硬件模块的解决方案时，就需要这种机制。 + +某些平台允许部分或所有 GPIO 信号使用不同的引脚。类似的，GPIO 或引脚的 +其他方面也需要配置，如上拉/下拉。平台软件应该在对这些 GPIO 调用 +gpio_request()前将这类细节配置好，例如使用 pinctrl 子系统的映射表， +使得 GPIO 的用户无须关注这些细节。 + +还有一个值得注意的是在释放 GPIO 前，你必须停止使用它。 + + +注意:申请一个 GPIO 并没有以任何方式配置它，只不过标识那个 GPIO 处于使用 +状态。必须有另外的代码来处理引脚配置(如控制 GPIO 使用的引脚、上拉/下拉)。 +考虑到大多数情况下声明 GPIO 之后就会立即配置它们,所以定义了以下三个辅助函数: + + /* 申请一个 GPIO 信号, 同时通过特定的'flags'初始化配置, + * 其他和 gpio_request()的参数和返回值相同 + * + */ + int gpio_request_one(unsigned gpio, unsigned long flags, const char *label); + + /* 在单个函数中申请多个 GPIO + */ + int gpio_request_array(struct gpio *array, size_t num); + + /* 在单个函数中释放多个 GPIO + */ + void gpio_free_array(struct gpio *array, size_t num); + +这里 'flags' 当前定义可指定以下属性: + + * GPIOF_DIR_IN - 配置方向为输入 + * GPIOF_DIR_OUT - 配置方向为输出 + + * GPIOF_INIT_LOW - 在作为输出时,初始值为低电平 + * GPIOF_INIT_HIGH - 在作为输出时,初始值为高电平 + * GPIOF_OPEN_DRAIN - gpio引脚为开漏信号 + * GPIOF_OPEN_SOURCE - gpio引脚为源极开路信号 + + * GPIOF_EXPORT_DIR_FIXED - 将 gpio 导出到 sysfs，并保持方向 + * GPIOF_EXPORT_DIR_CHANGEABLE - 同样是导出, 但允许改变方向 + +因为 GPIOF_INIT_* 仅有在配置为输出的时候才存在,所以有效的组合为: + + * GPIOF_IN - 配置为输入 + * GPIOF_OUT_INIT_LOW - 配置为输出,并初始化为低电平 + * GPIOF_OUT_INIT_HIGH - 配置为输出,并初始化为高电平 + +当设置 flag 为 GPIOF_OPEN_DRAIN 时，则假设引脚是开漏信号。这样的引脚 +将不会在输出模式下置1。这样的引脚需要连接上拉电阻。通过使能这个标志，gpio库 +将会在被要求输出模式下置1时将引脚变为输入状态来使引脚置高。引脚在输出模式下 +通过置0使其输出低电平。 + +当设置 flag 为 GPIOF_OPEN_SOURCE 时，则假设引脚为源极开路信号。这样的引脚 +将不会在输出模式下置0。这样的引脚需要连接下拉电阻。通过使能这个标志，gpio库 +将会在被要求输出模式下置0时将引脚变为输入状态来使引脚置低。引脚在输出模式下 +通过置1使其输出高电平。 + +将来这些标志可能扩展到支持更多的属性。 + +更进一步,为了更简单地声明/释放多个 GPIO,'struct gpio'被引进来封装所有 +这三个领域: + + struct gpio { + unsigned gpio; + unsigned long flags; + const char *label; + }; + +一个典型的用例: + + static struct gpio leds_gpios[] = { + { 32, GPIOF_OUT_INIT_HIGH, "Power LED" }, /* 默认开启 */ + { 33, GPIOF_OUT_INIT_LOW, "Green LED" }, /* 默认关闭 */ + { 34, GPIOF_OUT_INIT_LOW, "Red LED" }, /* 默认关闭 */ + { 35, GPIOF_OUT_INIT_LOW, "Blue LED" }, /* 默认关闭 */ + { ... }, + }; + + err = gpio_request_one(31, GPIOF_IN, "Reset Button"); + if (err) + ... + + err = gpio_request_array(leds_gpios, ARRAY_SIZE(leds_gpios)); + if (err) + ... + + gpio_free_array(leds_gpios, ARRAY_SIZE(leds_gpios)); + + +GPIO 映射到 IRQ +-------------------- +GPIO 编号是无符号整数;IRQ 编号也是。这些构成了两个逻辑上不同的命名空间 +(GPIO 0 不一定使用 IRQ 0)。你可以通过以下函数在它们之间实现映射: + + /* 映射 GPIO 编号到 IRQ 编号 */ + int gpio_to_irq(unsigned gpio); + + /* 映射 IRQ 编号到 GPIO 编号 (尽量避免使用) */ + int irq_to_gpio(unsigned irq); + +它们的返回值为对应命名空间的相关编号，或是负的错误代码(如果无法映射)。 +(例如,某些 GPIO 无法做为 IRQ 使用。)以下的编号错误是未经检测的:使用一个 +未通过 gpio_direction_input()配置为输入的 GPIO 编号，或者使用一个 +并非来源于gpio_to_irq()的 IRQ 编号。 + +这两个映射函数可能会在信号编号的加减计算过程上花些时间。它们不可休眠。 + +gpio_to_irq()返回的非错误值可以传递给 request_irq()或者 free_irq()。 +它们通常通过板级特定的初始化代码存放到平台设备的 IRQ 资源中。注意:IRQ +触发选项是 IRQ 接口的一部分，如 IRQF_TRIGGER_FALLING，系统唤醒能力 +也是如此。 + +irq_to_gpio()返回的非错误值大多数通常可以被 gpio_get_value()所使用， +比如在 IRQ 是沿触发时初始化或更新驱动状态。注意某些平台不支持反映射,所以 +你应该尽量避免使用它。 + + +模拟开漏信号 +---------------------------- +有时在只有低电平信号作为实际驱动结果(译者注:多个输出连接于一点，逻辑电平 +结果为所有输出的逻辑与)的时候,共享的信号线需要使用“开漏”信号。(该术语 +适用于 CMOS 管；而 TTL 用“集电极开路”。)一个上拉电阻使信号为高电平。这 +有时被称为“线与”。实际上，从负逻辑(低电平为真)的角度来看，这是一个“线或”。 + +一个开漏信号的常见例子是共享的低电平使能 IRQ 信号线。此外,有时双向数据总线 +信号也使用漏极开路信号。 + +某些 GPIO 控制器直接支持开漏输出，还有许多不支持。当你需要开漏信号，但 +硬件又不直接支持的时候，一个常用的方法是用任何即可作输入也可作输出的 GPIO +引脚来模拟: + + LOW: gpio_direction_output(gpio, 0) ... 这代码驱动信号并覆盖 + 上拉配置。 + + HIGH: gpio_direction_input(gpio) ... 这代码关闭输出,所以上拉电阻 + (或其他的一些器件)控制了信号。 + +如果你将信号线“驱动”为高电平，但是 gpio_get_value(gpio)报告了一个 +低电平(在适当的上升时间后)，你就可以知道是其他的一些组件将共享信号线拉低了。 +这不一定是错误的。一个常见的例子就是 I2C 时钟的延长：一个需要较慢时钟的 +从设备延迟 SCK 的上升沿，而 I2C 主设备相应地调整其信号传输速率。 + + +这些公约忽略了什么? +================ +这些公约忽略的最大一件事就是引脚复用，因为这属于高度芯片特定的属性且 +没有可移植性。某个平台可能不需要明确的复用信息；有的对于任意给定的引脚 +可能只有两个功能选项；有的可能每个引脚有八个功能选项；有的可能可以将 +几个引脚中的任何一个作为给定的 GPIO。(是的，这些例子都来自于当前运行 +Linux 的系统。) + +在某些系统中,与引脚复用相关的是配置和使能集成的上、下拉模式。并不是所有 +平台都支持这种模式,或者不会以相同的方式来支持这种模式；且任何给定的电路板 +可能使用外置的上拉(或下拉)电阻,这时芯片上的就不应该使用。(当一个电路需要 +5kOhm 的拉动电阻,芯片上的 100 kOhm 电阻就不能做到。)同样的，驱动能力 +(2 mA vs 20 mA)和电压(1.8V vs 3.3V)是平台特定问题,就像模型一样在 +可配置引脚和 GPIO 之间(没)有一一对应的关系。 + +还有其他一些系统特定的机制没有在这里指出，例如上述的输入去毛刺和线与输出 +选项。硬件可能支持批量读或写 GPIO，但是那一般是配置相关的：对于处于同一 +块区(bank)的GPIO。(GPIO 通常以 16 或 32 个组成一个区块，一个给定的 +片上系统一般有几个这样的区块。)某些系统可以通过输出 GPIO 触发 IRQ， +或者从并非以 GPIO 管理的引脚取值。这些机制的相关代码没有必要具有可移植性。 + +当前，动态定义 GPIO 并不是标准的，例如作为配置一个带有某些 GPIO 扩展器的 +附加电路板的副作用。 + +GPIO 实现者的框架 (可选) +===================== +前面提到了，有一个可选的实现框架，让平台使用相同的编程接口，更加简单地支持 +不同种类的 GPIO 控制器。这个框架称为"gpiolib"。 + +作为一个辅助调试功能，如果 debugfs 可用，就会有一个 /sys/kernel/debug/gpio +文件。通过这个框架，它可以列出所有注册的控制器,以及当前正在使用中的 GPIO +的状态。 + + +控制器驱动: gpio_chip +------------------- +在框架中每个 GPIO 控制器都包装为一个 "struct gpio_chip"，他包含了 +该类型的每个控制器的常用信息: + + - 设置 GPIO 方向的方法 + - 用于访问 GPIO 值的方法 + - 告知调用其方法是否可能休眠的标志 + - 可选的 debugfs 信息导出方法 (显示类似上拉配置一样的额外状态) + - 诊断标签 + +也包含了来自 device.platform_data 的每个实例的数据：它第一个 GPIO 的 +编号和它可用的 GPIO 的数量。 + +实现 gpio_chip 的代码应支持多控制器实例，这可能使用驱动模型。那些代码要 +配置每个 gpio_chip，并发起gpiochip_add()。卸载一个 GPIO 控制器很少见， +但在必要的时候可以使用 gpiochip_remove()。 + +大部分 gpio_chip 是一个实例特定结构体的一部分，而并不将 GPIO 接口单独 +暴露出来,比如编址、电源管理等。类似编解码器这样的芯片会有复杂的非 GPIO +状态。 + +任何一个 debugfs 信息导出方法通常应该忽略还未申请作为 GPIO 的信号线。 +他们可以使用 gpiochip_is_requested()测试，当这个 GPIO 已经申请过了 +就返回相关的标签，否则返回 NULL。 + + +平台支持 +------- +为了支持这个框架，一个平台的 Kconfig 文件将会 "select"(选择) +ARCH_REQUIRE_GPIOLIB 或 ARCH_WANT_OPTIONAL_GPIOLIB，并让它的 + 包含 ，同时定义三个方法: +gpio_get_value()、gpio_set_value()和 gpio_cansleep()。 + +它也应提供一个 ARCH_NR_GPIOS 的定义值，这样可以更好地反映该平台 GPIO +的实际数量,节省静态表的空间。(这个定义值应该包含片上系统内建 GPIO 和 +GPIO 扩展器中的数据。) + +ARCH_REQUIRE_GPIOLIB 意味着 gpiolib 核心在这个构架中将总是编译进内核。 + +ARCH_WANT_OPTIONAL_GPIOLIB 意味着 gpiolib 核心默认关闭,且用户可以 +使能它,并将其编译进内核(可选)。 + +如果这些选项都没被选择,该平台就不通过 GPIO-lib 支持 GPIO,且代码不可以 +被用户使能。 + +以下这些方法的实现可以直接使用框架代码,并总是通过 gpio_chip 调度: + + #define gpio_get_value __gpio_get_value + #define gpio_set_value __gpio_set_value + #define gpio_cansleep __gpio_cansleep + +这些定义可以用更理想的实现方法替代，那就是使用经过逻辑优化的内联函数来访问 +基于特定片上系统的 GPIO。例如,若引用的 GPIO (寄存器位偏移)是常量“12”， +读取或设置它可能只需少则两或三个指令，且不会休眠。当这样的优化无法实现时， +那些函数必须使用框架提供的代码，那就至少要几十条指令才可以实现。对于用 GPIO +模拟的 I/O 接口, 如此精简指令是很有意义的。 + +对于片上系统，平台特定代码为片上 GPIO 每个区(bank)定义并注册 gpio_chip +实例。那些 GPIO 应该根据芯片厂商的文档进行编码/标签,并直接和电路板原理图 +对应。他们应该开始于零并终止于平台特定的限制。这些 GPIO(代码)通常从 +arch_initcall()或者更早的地方集成进平台初始化代码，使这些 GPIO 总是可用， +且他们通常可以作为 IRQ 使用。 + +板级支持 +------- +对于外部 GPIO 控制器(例如 I2C 或 SPI 扩展器、专用芯片、多功能器件、FPGA +或 CPLD)，大多数常用板级特定代码都可以注册控制器设备，并保证他们的驱动知道 +gpiochip_add()所使用的 GPIO 编号。他们的起始编号通常跟在平台特定的 GPIO +编号之后。 + +例如板级启动代码应该创建结构体指明芯片公开的 GPIO 范围，并使用 platform_data +将其传递给每个 GPIO 扩展器芯片。然后芯片驱动中的 probe()例程可以将这个 +数据传递给 gpiochip_add()。 + +初始化顺序很重要。例如，如果一个设备依赖基于 I2C 的(扩展)GPIO，那么它的 +probe()例程就应该在那个 GPIO 有效以后才可以被调用。这意味着设备应该在 +GPIO 可以工作之后才可被注册。解决这类依赖的的一种方法是让这种 gpio_chip +控制器向板级特定代码提供 setup()和 teardown()回调函数。一旦所有必须的 +资源可用之后，这些板级特定的回调函数将会注册设备，并可以在这些 GPIO 控制器 +设备变成无效时移除它们。 + + +用户空间的 Sysfs 接口(可选) +======================== +使用“gpiolib”实现框架的平台可以选择配置一个 GPIO 的 sysfs 用户接口。 +这不同于 debugfs 接口，因为它提供的是对 GPIO方向和值的控制，而不只显示 +一个GPIO 的状态摘要。此外,它可以出现在没有调试支持的产品级系统中。 + +例如，通过适当的系统硬件文档，用户空间可以知道 GIOP #23 控制 Flash +存储器的写保护(用于保护其中 Bootloader 分区)。产品的系统升级可能需要 +临时解除这个保护：首先导入一个 GPIO，改变其输出状态，然后在重新使能写保护 +前升级代码。通常情况下,GPIO #23 是不会被触及的，并且内核也不需要知道他。 + +根据适当的硬件文档，某些系统的用户空间 GPIO 可以用于确定系统配置数据， +这些数据是标准内核不知道的。在某些任务中，简单的用户空间 GPIO 驱动可能是 +系统真正需要的。 + +注意：标准内核驱动中已经存在通用的“LED 和按键”GPIO 任务，分别是: +"leds-gpio" 和 "gpio_keys"。请使用这些来替代直接访问 GPIO，因为集成在 +内核框架中的这类驱动比你在用户空间的代码更好。 + + +Sysfs 中的路径 +-------------- +在/sys/class/gpio 中有 3 类入口: + + - 用于在用户空间控制 GPIO 的控制接口; + + - GPIOs 本身;以及 + + - GPIO 控制器 ("gpio_chip" 实例)。 + +除了这些标准的文件,还包含“device”符号链接。 + +控制接口是只写的: + + /sys/class/gpio/ + + "export" ... 用户空间可以通过写其编号到这个文件，要求内核导出 + 一个 GPIO 的控制到用户空间。 + + 例如: 如果内核代码没有申请 GPIO #19,"echo 19 > export" + 将会为 GPIO #19 创建一个 "gpio19" 节点。 + + "unexport" ... 导出到用户空间的逆操作。 + + 例如: "echo 19 > unexport" 将会移除使用"export"文件导出的 + "gpio19" 节点。 + +GPIO 信号的路径类似 /sys/class/gpio/gpio42/ (对于 GPIO #42 来说)， +并有如下的读/写属性: + + /sys/class/gpio/gpioN/ + + "direction" ... 读取得到 "in" 或 "out"。这个值通常运行写入。 + 写入"out" 时,其引脚的默认输出为低电平。为了确保无故障运行， + "low" 或 "high" 的电平值应该写入 GPIO 的配置，作为初始输出值。 + + 注意:如果内核不支持改变 GPIO 的方向，或者在导出时内核代码没有 + 明确允许用户空间可以重新配置 GPIO 方向，那么这个属性将不存在。 + + "value" ... 读取得到 0 (低电平) 或 1 (高电平)。如果 GPIO 配置为 + 输出,这个值允许写操作。任何非零值都以高电平看待。 + + 如果引脚可以配置为中断信号，且如果已经配置了产生中断的模式 + （见"edge"的描述），你可以对这个文件使用轮询操作(poll(2))， + 且轮询操作会在任何中断触发时返回。如果你使用轮询操作(poll(2))， + 请在 events 中设置 POLLPRI 和 POLLERR。如果你使用轮询操作 + (select(2))，请在 exceptfds 设置你期望的文件描述符。在 + 轮询操作(poll(2))返回之后，既可以通过 lseek(2)操作读取 + sysfs 文件的开始部分，也可以关闭这个文件并重新打开它来读取数据。 + + "edge" ... 读取得到“none”、“rising”、“falling”或者“both”。 + 将这些字符串写入这个文件可以选择沿触发模式，会使得轮询操作 + (select(2))在"value"文件中返回。 + + 这个文件仅有在这个引脚可以配置为可产生中断输入引脚时，才存在。 + + "active_low" ... 读取得到 0 (假) 或 1 (真)。写入任何非零值可以 + 翻转这个属性的(读写)值。已存在或之后通过"edge"属性设置了"rising" + 和 "falling" 沿触发模式的轮询操作(poll(2))将会遵循这个设置。 + +GPIO 控制器的路径类似 /sys/class/gpio/gpiochip42/ (对于从#42 GPIO +开始实现控制的控制器),并有着以下只读属性: + + /sys/class/gpio/gpiochipN/ + + "base" ... 与以上的 N 相同,代表此芯片管理的第一个 GPIO 的编号 + + "label" ... 用于诊断 (并不总是只有唯一值) + + "ngpio" ... 此控制器所管理的 GPIO 数量(而 GPIO 编号从 N 到 + N + ngpio - 1) + +大多数情况下,电路板的文档应当标明每个 GPIO 的使用目的。但是那些编号并不总是 +固定的,例如在扩展卡上的 GPIO会根据所使用的主板或所在堆叠架构中其他的板子而 +有所不同。在这种情况下,你可能需要使用 gpiochip 节点(尽可能地结合电路图)来 +确定给定信号所用的 GPIO 编号。 + + +从内核代码中导出 +------------- +内核代码可以明确地管理那些已通过 gpio_request()申请的 GPIO 的导出: + + /* 导出 GPIO 到用户空间 */ + int gpio_export(unsigned gpio, bool direction_may_change); + + /* gpio_export()的逆操作 */ + void gpio_unexport(); + + /* 创建一个 sysfs 连接到已导出的 GPIO 节点 */ + int gpio_export_link(struct device *dev, const char *name, + unsigned gpio) + + /* 改变 sysfs 中的一个 GPIO 节点的极性 */ + int gpio_sysfs_set_active_low(unsigned gpio, int value); + +在一个内核驱动申请一个 GPIO 之后，它可以通过 gpio_export()使其在 sysfs +接口中可见。该驱动可以控制信号方向是否可修改。这有助于防止用户空间代码无意间 +破坏重要的系统状态。 + +这个明确的导出有助于(通过使某些实验更容易来)调试，也可以提供一个始终存在的接口， +与文档配合作为板级支持包的一部分。 + +在 GPIO 被导出之后，gpio_export_link()允许在 sysfs 文件系统的任何地方 +创建一个到这个 GPIO sysfs 节点的符号链接。这样驱动就可以通过一个描述性的 +名字，在 sysfs 中他们所拥有的设备下提供一个(到这个 GPIO sysfs 节点的)接口。 + +驱动可以使用 gpio_sysfs_set_active_low() 来在用户空间隐藏电路板之间 +GPIO 线的极性差异。这个仅对 sysfs 接口起作用。极性的改变可以在 gpio_export() +前后进行,且之前使能的轮询操作(poll(2))支持(上升或下降沿)将会被重新配置来遵循 +这个设置。 diff --git a/Documentation/zh_CN/video4linux/omap3isp.txt b/Documentation/zh_CN/video4linux/omap3isp.txt new file mode 100644 index 0000000000000000000000000000000000000000..67ffbf352ae0c252d67d8c262d4a416de97ce6f7 --- /dev/null +++ b/Documentation/zh_CN/video4linux/omap3isp.txt @@ -0,0 +1,277 @@ +Chinese translated version of Documentation/video4linux/omap3isp.txt + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Maintainer: Laurent Pinchart + Sakari Ailus + David Cohen +Chinese maintainer: Fu Wei +--------------------------------------------------------------------- +Documentation/video4linux/omap3isp.txt 的中文翻译 + +如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 +交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题，请联系中文版维护者。 +英文版维护者： Laurent Pinchart + Sakari Ailus + David Cohen +中文版维护者： 傅炜 Fu Wei +中文版翻译者： 傅炜 Fu Wei +中文版校译者： 傅炜 Fu Wei + + +以下为正文 +--------------------------------------------------------------------- +OMAP 3 图像信号处理器 (ISP) 驱动 + +Copyright (C) 2010 Nokia Corporation +Copyright (C) 2009 Texas Instruments, Inc. + +联系人: Laurent Pinchart + Sakari Ailus + David Cohen + + +介绍 +=== + +本文档介绍了由 drivers/media/video/omap3isp 加载的德州仪器 +（TI）OMAP 3 图像信号处理器 (ISP) 驱动。原始驱动由德州仪器（TI） +编写，但此后由诺基亚重写了两次。 + +驱动已在以下 OMAP 3 系列的芯片中成功使用： + + 3430 + 3530 + 3630 + +驱动实现了 V4L2、媒体控制器和 v4l2_subdev 接口。支持内核中使用 +v4l2_subdev 接口的传感器、镜头和闪光灯驱动。 + + +拆分为子设备 +========== + +OMAP 3 ISP 被拆分为 V4L2 子设备，ISP中的每个模块都由一个子设备 +来表示。每个子设备向用户空间提供一个 V4L2 子设备接口。 + + OMAP3 ISP CCP2 + OMAP3 ISP CSI2a + OMAP3 ISP CCDC + OMAP3 ISP preview + OMAP3 ISP resizer + OMAP3 ISP AEWB + OMAP3 ISP AF + OMAP3 ISP histogram + +ISP 中每个可能的连接都通过一个链接嵌入到媒体控制器接口中。详见例程 [2]。 + + +控制 OMAP 3 ISP +============== + +通常，对 OMAP 3 ISP 的配置会在下一帧起始时生效。在传感器垂直消隐期间， +模块变为空闲时完成配置。在内存到内存的操作中，视频管道一次处理一帧。 +应用配置应在帧间完成。 + +ISP 中的所有模块，除 CSI-2 和 （可能存在的）CCP2 接收器外，都必须 +接收完整的帧数据。因此，传感器必须保证从不发送部分帧数据给ISP。 + +Autoidle（自动空闲）功能至少在 3430 的 ISP 模块中确实存在一些问题。 +当 omap3isp 模块参数 autoidle 非零时，autoidle（自动空闲）功能 +仅在 3630 中启用了。 + + +事件机制 +====== + +OMAP 3 ISP 驱动在 CCDC 和统计（AEWB、AF 和 直方图）子设备中支持 +V4L2 事件机制接口。 + +CCDC 子设备通过 HS_VS 中断，处理 V4L2_EVENT_FRAME_SYNC 类型 +事件，用于告知帧起始。早期版本的驱动则使用 V4L2_EVENT_OMAP3ISP_HS_VS。 +当在 CCDC 模块中接收到起始帧的第一行时，会准确地触发事件。这个事件 +可以在 CCDC 子设备中“订阅”。 + +（当使用并行接口时，必须注意正确地配置 VS 信号极性。而当使用串行接收时 +这个会自动校正。） + +每个统计子设备都可以产生事件。每当一个统计缓冲区可由用户空间应用程序 +通过 VIDIOC_OMAP3ISP_STAT_REQ IOCTL 操作获取时，就会产生一个 +事件。当前存在以下事件： + + V4L2_EVENT_OMAP3ISP_AEWB + V4L2_EVENT_OMAP3ISP_AF + V4L2_EVENT_OMAP3ISP_HIST + +这些 ioctl 的事件数据类型为 struct omap3isp_stat_event_status +结构体。如果出现计算错误的统计，也同样会产生一个事件，但没有相关的统计 +数据缓冲区。这种情况下 omap3isp_stat_event_status.buf_err 会被 +设置为非零值。 + + +私有 IOCTL +========== + +OMAP 3 ISP 驱动支持标准的 V4L2 IOCTL 以及可能存在且实用的控制。但 +ISP 提供的许多功能都不在标准 IOCTL 之列，例如 gamma（伽马）表和统计 +数据采集配置等。 + +通常，会有一个私有 ioctl 用于配置每个包含硬件依赖功能的模块。 + +支持以下私有 IOCTL： + + VIDIOC_OMAP3ISP_CCDC_CFG + VIDIOC_OMAP3ISP_PRV_CFG + VIDIOC_OMAP3ISP_AEWB_CFG + VIDIOC_OMAP3ISP_HIST_CFG + VIDIOC_OMAP3ISP_AF_CFG + VIDIOC_OMAP3ISP_STAT_REQ + VIDIOC_OMAP3ISP_STAT_EN + +在 include/linux/omap3isp.h 中描述了这些 ioctl 使用的参数结构体。 +与特定 ISP 模块相关的 ISP 自身的详细功能在技术参考手册 (TRMs)中有 +描述，详见文档结尾。 + +虽然在不使用任何私有 IOCTL 的情况下使用 ISP 驱动是可能的，但这样无法 +获得最佳的图像质量。AEWB、AF 和 直方图（译者注：一般用于自动曝光和增益 +控制，以及图像均衡等）模块无法在未使用适当的私有 IOCTL 配置的情况下使用。 + + +CCDC 和 preview（预览）模块 IOCTL +=============================== + +VIDIOC_OMAP3ISP_CCDC_CFG 和 VIDIOC_OMAP3ISP_PRV_CFG IOCTL +被分别用于配置、启用和禁用 CCDC 和 preview（预览）模块的功能。在它们 +所控制的模块中，两个 IOCTL 控制多种功能。VIDIOC_OMAP3ISP_CCDC_CFG IOCTL +接受一个指向 omap3isp_ccdc_update_config 结构体的指针作为它的参数。 +同样的，VIDIOC_OMAP3ISP_PRV_CFG 接受一个指向 omap3isp_prev_update_config +结构体的指针。以上两个结构体定义位于 [1]。 + +这些结构体中的 update 域标识是否针对指定的功能更新配置，而 flag 域 +则标识是启用还是禁用此功能。 + +update 和 flag 位接受以下掩码值。CCDC 和 preview（预览）模块的 +每个单独功能都与一个 flag 关联（禁用或启用；在结构体中 flag 域的 +一部分）和一个指向功能配置数据的指针。 + +对于 VIDIOC_OMAP3ISP_CCDC_CFG，下面列出了 update 和 flag 域 +中的有效值。 这些值可能会在同一个 IOCTL 调用中配置多个功能。 + + OMAP3ISP_CCDC_ALAW + OMAP3ISP_CCDC_LPF + OMAP3ISP_CCDC_BLCLAMP + OMAP3ISP_CCDC_BCOMP + OMAP3ISP_CCDC_FPC + OMAP3ISP_CCDC_CULL + OMAP3ISP_CCDC_CONFIG_LSC + OMAP3ISP_CCDC_TBL_LSC + +针对 VIDIOC_OMAP3ISP_PRV_CFG 的相应值如下： + + OMAP3ISP_PREV_LUMAENH + OMAP3ISP_PREV_INVALAW + OMAP3ISP_PREV_HRZ_MED + OMAP3ISP_PREV_CFA + OMAP3ISP_PREV_CHROMA_SUPP + OMAP3ISP_PREV_WB + OMAP3ISP_PREV_BLKADJ + OMAP3ISP_PREV_RGB2RGB + OMAP3ISP_PREV_COLOR_CONV + OMAP3ISP_PREV_YC_LIMIT + OMAP3ISP_PREV_DEFECT_COR + OMAP3ISP_PREV_GAMMABYPASS + OMAP3ISP_PREV_DRK_FRM_CAPTURE + OMAP3ISP_PREV_DRK_FRM_SUBTRACT + OMAP3ISP_PREV_LENS_SHADING + OMAP3ISP_PREV_NF + OMAP3ISP_PREV_GAMMA + +在启用某个功能的时候，相关的配置数据指针不可为 NULL。在禁用某个功能时， +配置数据指针会被忽略。 + + +统计模块 IOCTL +============= + +统计子设备相较于其他子设备提供了更多动态配置选项。在图像处理流水线处于 +工作状态时，它们可以被启用、禁用和重配。 + +统计模块总是从 CCDC 中获取输入的图像数据（由于直方图内存读取未实现）。 +统计数据可由用户通过统计子设备节点使用私有 IOCTL 获取。 + +AEWB、AF 和 直方图子设备提供的私有 IOCTL 极大程度上反应了 ISP 硬件 +提供的寄存器级接口。有些方面纯粹和驱动程序的实现相关，这些将在下面讨论。 + +VIDIOC_OMAP3ISP_STAT_EN +----------------------- + +这个私有 IOCTL 启用/禁用 一个统计模块。如果这个申请在视频流启动前完成， +它将在视频流水线开始工作时生效。如果视频流水线已经处于工作状态了，它将在 +CCDC 变为空闲时生效。 + +VIDIOC_OMAP3ISP_AEWB_CFG, VIDIOC_OMAP3ISP_HIST_CFG and VIDIOC_OMAP3ISP_AF_CFG +----------------------------------------------------------------------------- + +这些 IOCTL 用于配置模块。它们要求用户应用程序对硬件有深入的认识。对 +大多数域的解释可以在 OMAP 的 TRM 中找到。以下两个域对于以上所有的 +私有 IOCTL 配置都很常见，由于他们没有在 TRM 中提及，故需要对其有 +更好的认识。 + +omap3isp_[h3a_af/h3a_aewb/hist]_config.buf_size: + +模块在内部处理自身缓冲。对模块数据输出所必需的缓存大小依赖于已申请的配置。 +虽然驱动支持在视频流工作时重新配置，但对于所需缓存量大于模块启用时内部 +所分配数量的情况，则不支持重新配置。在这种情况下将返回 -EBUSY。为了避免 +此类状况，无论是禁用/重配/启用模块，还是第一次配置时申请必须的缓存大小， +都应在模块禁用的情况下进行。 + +内部缓冲分配的大小需综合考虑所申请配置的最小缓存量以及 buf_size 域中 +所设的值。如果 buf_size 域在[minimum（最小值）, maximum（最大值）] +缓冲大小范围之外，则应该将其调整到其范围中。驱动则会选择最大值。正确的 +buf_size 值将回写到用户应用程序中。 + +omap3isp_[h3a_af/h3a_aewb/hist]_config.config_counter: + +由于配置并未在申请之后同步生效，驱动必须提供一个跟踪这类信息的方法， +以提供更准确的数据。在一个配置被申请之后，返回到用户空间应用程序的 +config_counter 是一个与其配置相关的唯一值。当用户应用程序接收到 +一个缓冲可用或一个新的缓冲申请事件时，这个 config_counter 用于 +一个缓冲数据和一个配置的匹配。 + +VIDIOC_OMAP3ISP_STAT_REQ +------------------------ + +将内部缓冲队列中最早的数据发送到用户空间，然后丢弃此缓冲区。 +omap3isp_stat_data.frame_number 域与视频缓冲的 field_count +域相匹配。 + + +技术参考手册 (TRMs) 和其他文档 +========================== + +OMAP 3430 TRM: + +参考于 2011-03-05. + +OMAP 35xx TRM: + 参考于 2011-03-05. + +OMAP 3630 TRM: + +参考于 2011-03-05. + +DM 3730 TRM: + 参考于 2011-03-06. + + +参考资料 +======= + +[1] include/linux/omap3isp.h + +[2] http://git.ideasonboard.org/?p=media-ctl.git;a=summary diff --git a/Documentation/zh_CN/video4linux/v4l2-framework.txt b/Documentation/zh_CN/video4linux/v4l2-framework.txt new file mode 100644 index 0000000000000000000000000000000000000000..3e74f13af4266d8d7aab3b3910b93a73bc1b5b71 --- /dev/null +++ b/Documentation/zh_CN/video4linux/v4l2-framework.txt @@ -0,0 +1,983 @@ +Chinese translated version of Documentation/video4linux/v4l2-framework.txt + +If you have any comment or update to the content, please contact the +original document maintainer directly. However, if you have a problem +communicating in English you can also ask the Chinese maintainer for +help. Contact the Chinese maintainer if this translation is outdated +or if there is a problem with the translation. + +Maintainer: Mauro Carvalho Chehab +Chinese maintainer: Fu Wei +--------------------------------------------------------------------- +Documentation/video4linux/v4l2-framework.txt 的中文翻译 + +如果想评论或更新本文的内容，请直接联系原文档的维护者。如果你使用英文 +交流有困难的话，也可以向中文版维护者求助。如果本翻译更新不及时或者翻 +译存在问题，请联系中文版维护者。 +英文版维护者： Mauro Carvalho Chehab +中文版维护者： 傅炜 Fu Wei +中文版翻译者： 傅炜 Fu Wei +中文版校译者： 傅炜 Fu Wei + + +以下为正文 +--------------------------------------------------------------------- +V4L2 驱动框架概览 +============== + +本文档描述 V4L2 框架所提供的各种结构和它们之间的关系。 + + +介绍 +---- + +大部分现代 V4L2 设备由多个 IC 组成，在 /dev 下导出多个设备节点， +并同时创建非 V4L2 设备（如 DVB、ALSA、FB、I2C 和红外输入设备）。 +由于这种硬件的复杂性，V4L2 驱动也变得非常复杂。 + +尤其是 V4L2 必须支持 IC 实现音视频的多路复用和编解码，这就更增加了其 +复杂性。通常这些 IC 通过一个或多个 I2C 总线连接到主桥驱动器，但也可 +使用其他总线。这些设备称为“子设备”。 + +长期以来，这个框架仅限于通过 video_device 结构体创建 V4L 设备节点， +并使用 video_buf 处理视频缓冲（注：本文不讨论 video_buf 框架）。 + +这意味着所有驱动必须自己设置设备实例并连接到子设备。其中一部分要正确地 +完成是比较复杂的，使得许多驱动都没有正确地实现。 + +由于框架的缺失，有很多通用代码都不可重复利用。 + +因此，这个框架构建所有驱动都需要的基本结构块，而统一的框架将使通用代码 +创建成实用函数并在所有驱动中共享变得更加容易。 + + +驱动结构 +------- + +所有 V4L2 驱动都有如下结构： + +1) 每个设备实例的结构体--包含其设备状态。 + +2) 初始化和控制子设备的方法（如果有）。 + +3) 创建 V4L2 设备节点 (/dev/videoX、/dev/vbiX 和 /dev/radioX) + 并跟踪设备节点的特定数据。 + +4) 特定文件句柄结构体--包含每个文件句柄的数据。 + +5) 视频缓冲处理。 + +以下是它们的初略关系图： + + device instances（设备实例） + | + +-sub-device instances（子设备实例） + | + \-V4L2 device nodes（V4L2 设备节点） + | + \-filehandle instances（文件句柄实例） + + +框架结构 +------- + +该框架非常类似驱动结构：它有一个 v4l2_device 结构用于保存设备 +实例的数据；一个 v4l2_subdev 结构体代表子设备实例；video_device +结构体保存 V4L2 设备节点的数据；将来 v4l2_fh 结构体将跟踪文件句柄 +实例（暂未尚未实现）。 + +V4L2 框架也可与媒体框架整合（可选的）。如果驱动设置了 v4l2_device +结构体的 mdev 域，子设备和视频节点的入口将自动出现在媒体框架中。 + + +v4l2_device 结构体 +---------------- + +每个设备实例都通过 v4l2_device (v4l2-device.h)结构体来表示。 +简单设备可以仅分配这个结构体，但在大多数情况下，都会将这个结构体 +嵌入到一个更大的结构体中。 + +你必须注册这个设备实例： + + v4l2_device_register(struct device *dev, struct v4l2_device *v4l2_dev); + +注册操作将会初始化 v4l2_device 结构体。如果 dev->driver_data 域 +为 NULL，就将其指向 v4l2_dev。 + +需要与媒体框架整合的驱动必须手动设置 dev->driver_data，指向包含 +v4l2_device 结构体实例的驱动特定设备结构体。这可以在注册 V4L2 设备 +实例前通过 dev_set_drvdata() 函数完成。同时必须设置 v4l2_device +结构体的 mdev 域，指向适当的初始化并注册过的 media_device 实例。 + +如果 v4l2_dev->name 为空，则它将被设置为从 dev 中衍生出的值（为了 +更加精确，形式为驱动名后跟 bus_id）。如果你在调用 v4l2_device_register +前已经设置好了，则不会被修改。如果 dev 为 NULL，则你*必须*在调用 +v4l2_device_register 前设置 v4l2_dev->name。 + +你可以基于驱动名和驱动的全局 atomic_t 类型的实例编号，通过 +v4l2_device_set_name() 设置 name。这样会生成类似 ivtv0、ivtv1 等 +名字。若驱动名以数字结尾，则会在编号和驱动名间插入一个破折号，如： +cx18-0、cx18-1 等。此函数返回实例编号。 + +第一个 “dev” 参数通常是一个指向 pci_dev、usb_interface 或 +platform_device 的指针。很少使其为 NULL，除非是一个ISA设备或者 +当一个设备创建了多个 PCI 设备，使得 v4l2_dev 无法与一个特定的父设备 +关联。 + +你也可以提供一个 notify() 回调，使子设备可以调用它实现事件通知。 +但这个设置与子设备相关。子设备支持的任何通知必须在 +include/media/.h 中定义一个消息头。 + +注销 v4l2_device 使用如下函数： + + v4l2_device_unregister(struct v4l2_device *v4l2_dev); + +如果 dev->driver_data 域指向 v4l2_dev，将会被重置为 NULL。注销同时 +会自动从设备中注销所有子设备。 + +如果你有一个热插拔设备（如USB设备），则当断开发生时，父设备将无效。 +由于 v4l2_device 有一个指向父设备的指针必须被清除，同时标志父设备 +已消失，所以必须调用以下函数： + + v4l2_device_disconnect(struct v4l2_device *v4l2_dev); + +这个函数并*不*注销子设备，因此你依然要调用 v4l2_device_unregister() +函数。如果你的驱动器并非热插拔的，就没有必要调用 v4l2_device_disconnect()。 + +有时你需要遍历所有被特定驱动注册的设备。这通常发生在多个设备驱动使用 +同一个硬件的情况下。如：ivtvfb 驱动是一个使用 ivtv 硬件的帧缓冲驱动， +同时 alsa 驱动也使用此硬件。 + +你可以使用如下例程遍历所有注册的设备： + +static int callback(struct device *dev, void *p) +{ + struct v4l2_device *v4l2_dev = dev_get_drvdata(dev); + + /* 测试这个设备是否已经初始化 */ + if (v4l2_dev == NULL) + return 0; + ... + return 0; +} + +int iterate(void *p) +{ + struct device_driver *drv; + int err; + + /* 在PCI 总线上查找ivtv驱动。 + pci_bus_type是全局的. 对于USB总线使用usb_bus_type。 */ + drv = driver_find("ivtv", &pci_bus_type); + /* 遍历所有的ivtv设备实例 */ + err = driver_for_each_device(drv, NULL, p, callback); + put_driver(drv); + return err; +} + +有时你需要一个设备实例的运行计数。这个通常用于映射一个设备实例到一个 +模块选择数组的索引。 + +推荐方法如下： + +static atomic_t drv_instance = ATOMIC_INIT(0); + +static int __devinit drv_probe(struct pci_dev *pdev, + const struct pci_device_id *pci_id) +{ + ... + state->instance = atomic_inc_return(&drv_instance) - 1; +} + +如果你有多个设备节点，对于热插拔设备，知道何时注销 v4l2_device 结构体 +就比较困难。为此 v4l2_device 有引用计数支持。当调用 video_register_device +时增加引用计数，而设备节点释放时减小引用计数。当引用计数为零，则 +v4l2_device 的release() 回调将被执行。你就可以在此时做最后的清理工作。 + +如果创建了其他设备节点（比如 ALSA），则你可以通过以下函数手动增减 +引用计数： + +void v4l2_device_get(struct v4l2_device *v4l2_dev); + +或: + +int v4l2_device_put(struct v4l2_device *v4l2_dev); + +由于引用技术初始化为 1 ，你也需要在 disconnect() 回调（对于 USB 设备）中 +调用 v4l2_device_put，或者 remove() 回调（例如对于 PCI 设备），否则 +引用计数将永远不会为 0 。 + +v4l2_subdev结构体 +------------------ + +许多驱动需要与子设备通信。这些设备可以完成各种任务，但通常他们负责 +音视频复用和编解码。如网络摄像头的子设备通常是传感器和摄像头控制器。 + +这些一般为 I2C 接口设备，但并不一定都是。为了给驱动提供调用子设备的 +统一接口，v4l2_subdev 结构体（v4l2-subdev.h）产生了。 + +每个子设备驱动都必须有一个 v4l2_subdev 结构体。这个结构体可以单独 +代表一个简单的子设备，也可以嵌入到一个更大的结构体中，与更多设备状态 +信息保存在一起。通常有一个下级设备结构体（比如：i2c_client）包含了 +内核创建的设备数据。建议使用 v4l2_set_subdevdata() 将这个结构体的 +指针保存在 v4l2_subdev 的私有数据域(dev_priv)中。这使得通过 v4l2_subdev +找到实际的低层总线特定设备数据变得容易。 + +你同时需要一个从低层结构体获取 v4l2_subdev 指针的方法。对于常用的 +i2c_client 结构体，i2c_set_clientdata() 函数可用于保存一个 v4l2_subdev +指针；对于其他总线你可能需要使用其他相关函数。 + +桥驱动中也应保存每个子设备的私有数据，比如一个指向特定桥的各设备私有 +数据的指针。为此 v4l2_subdev 结构体提供主机私有数据域(host_priv)， +并可通过 v4l2_get_subdev_hostdata() 和 v4l2_set_subdev_hostdata() +访问。 + +从总线桥驱动的视角，驱动加载子设备模块并以某种方式获得 v4l2_subdev +结构体指针。对于 i2c 总线设备相对简单：调用 i2c_get_clientdata()。 +对于其他总线也需要做类似的操作。针对 I2C 总线上的子设备辅助函数帮你 +完成了大部分复杂的工作。 + +每个 v4l2_subdev 都包含子设备驱动需要实现的函数指针（如果对此设备 +不适用，可为NULL）。由于子设备可完成许多不同的工作，而在一个庞大的 +函数指针结构体中通常仅有少数有用的函数实现其功能肯定不合适。所以， +函数指针根据其实现的功能被分类，每一类都有自己的函数指针结构体。 + +顶层函数指针结构体包含了指向各类函数指针结构体的指针，如果子设备驱动 +不支持该类函数中的任何一个功能，则指向该类结构体的指针为NULL。 + +这些结构体定义如下： + +struct v4l2_subdev_core_ops { + int (*g_chip_ident)(struct v4l2_subdev *sd, struct v4l2_dbg_chip_ident *chip); + int (*log_status)(struct v4l2_subdev *sd); + int (*init)(struct v4l2_subdev *sd, u32 val); + ... +}; + +struct v4l2_subdev_tuner_ops { + ... +}; + +struct v4l2_subdev_audio_ops { + ... +}; + +struct v4l2_subdev_video_ops { + ... +}; + +struct v4l2_subdev_pad_ops { + ... +}; + +struct v4l2_subdev_ops { + const struct v4l2_subdev_core_ops *core; + const struct v4l2_subdev_tuner_ops *tuner; + const struct v4l2_subdev_audio_ops *audio; + const struct v4l2_subdev_video_ops *video; + const struct v4l2_subdev_pad_ops *video; +}; + +其中 core（核心）函数集通常可用于所有子设备，其他类别的实现依赖于 +子设备。如视频设备可能不支持音频操作函数，反之亦然。 + +这样的设置在限制了函数指针数量的同时，还使增加新的操作函数和分类 +变得较为容易。 + +子设备驱动可使用如下函数初始化 v4l2_subdev 结构体： + + v4l2_subdev_init(sd, &ops); + +然后，你必须用一个唯一的名字初始化 subdev->name，并初始化模块的 +owner 域。若使用 i2c 辅助函数，这些都会帮你处理好。 + +若需同媒体框架整合，你必须调用 media_entity_init() 初始化 v4l2_subdev +结构体中的 media_entity 结构体（entity 域）： + + struct media_pad *pads = &my_sd->pads; + int err; + + err = media_entity_init(&sd->entity, npads, pads, 0); + +pads 数组必须预先初始化。无须手动设置 media_entity 的 type 和 +name 域，但如有必要，revision 域必须初始化。 + +当（任何）子设备节点被打开/关闭，对 entity 的引用将被自动获取/释放。 + +在子设备被注销之后，不要忘记清理 media_entity 结构体： + + media_entity_cleanup(&sd->entity); + +如果子设备驱动趋向于处理视频并整合进了媒体框架，必须使用 v4l2_subdev_pad_ops +替代 v4l2_subdev_video_ops 实现格式相关的功能。 + +这种情况下，子设备驱动应该设置 link_validate 域，以提供它自身的链接 +验证函数。链接验证函数应对管道（两端链接的都是 V4L2 子设备）中的每个 +链接调用。驱动还要负责验证子设备和视频节点间格式配置的正确性。 + +如果 link_validate 操作没有设置，默认的 v4l2_subdev_link_validate_default() +函数将会被调用。这个函数保证宽、高和媒体总线像素格式在链接的收发两端 +都一致。子设备驱动除了它们自己的检测外，也可以自由使用这个函数以执行 +上面提到的检查。 + +设备（桥）驱动程序必须向 v4l2_device 注册 v4l2_subdev： + + int err = v4l2_device_register_subdev(v4l2_dev, sd); + +如果子设备模块在它注册前消失，这个操作可能失败。在这个函数成功返回后， +subdev->dev 域就指向了 v4l2_device。 + +如果 v4l2_device 父设备的 mdev 域为非 NULL 值，则子设备实体将被自动 +注册为媒体设备。 + +注销子设备则可用如下函数： + + v4l2_device_unregister_subdev(sd); + +此后，子设备模块就可卸载，且 sd->dev == NULL。 + +注册之设备后，可通过以下方式直接调用其操作函数： + + err = sd->ops->core->g_chip_ident(sd, &chip); + +但使用如下宏会比较容易且合适： + + err = v4l2_subdev_call(sd, core, g_chip_ident, &chip); + +这个宏将会做 NULL 指针检查，如果 subdev 为 NULL，则返回-ENODEV；如果 +subdev->core 或 subdev->core->g_chip_ident 为 NULL，则返回 -ENOIOCTLCMD； +否则将返回 subdev->ops->core->g_chip_ident ops 调用的实际结果。 + +有时也可能同时调用所有或一系列子设备的某个操作函数： + + v4l2_device_call_all(v4l2_dev, 0, core, g_chip_ident, &chip); + +任何不支持此操作的子设备都会被跳过，并忽略错误返回值。但如果你需要 +检查出错码，则可使用如下函数： + + err = v4l2_device_call_until_err(v4l2_dev, 0, core, g_chip_ident, &chip); + +除 -ENOIOCTLCMD 外的任何错误都会跳出循环并返回错误值。如果（除 -ENOIOCTLCMD +外）没有错误发生，则返回 0。 + +对于以上两个函数的第二个参数为组 ID。如果为 0，则所有子设备都会执行 +这个操作。如果为非 0 值，则只有那些组 ID 匹配的子设备才会执行此操作。 +在桥驱动注册一个子设备前，可以设置 sd->grp_id 为任何期望值（默认值为 +0）。这个值属于桥驱动，且子设备驱动将不会修改和使用它。 + +组 ID 赋予了桥驱动更多对于如何调用回调的控制。例如，电路板上有多个 +音频芯片，每个都有改变音量的能力。但当用户想要改变音量的时候，通常 +只有一个会被实际使用。你可以对这样的子设备设置组 ID 为（例如 AUDIO_CONTROLLER） +并在调用 v4l2_device_call_all() 时指定它为组 ID 值。这就保证了只有 +需要的子设备才会执行这个回调。 + +如果子设备需要通知它的 v4l2_device 父设备一个事件，可以调用 +v4l2_subdev_notify(sd, notification, arg)。这个宏检查是否有一个 +notify() 回调被注册，如果没有，返回 -ENODEV。否则返回 notify() 调用 +结果。 + +使用 v4l2_subdev 的好处在于它是一个通用结构体，且不包含任何底层硬件 +信息。所有驱动可以包含多个 I2C 总线的子设备，但也有子设备是通过 GPIO +控制。这个区别仅在配置设备时有关系，一旦子设备注册完成，对于 v4l2 +子系统来说就完全透明了。 + + +V4L2 子设备用户空间API +-------------------- + +除了通过 v4l2_subdev_ops 结构导出的内核 API，V4L2 子设备也可以直接 +通过用户空间应用程序来控制。 + +可以在 /dev 中创建名为 v4l-subdevX 设备节点，以通过其直接访问子设备。 +如果子设备支持用户空间直接配置，必须在注册前设置 V4L2_SUBDEV_FL_HAS_DEVNODE +标志。 + +注册子设备之后， v4l2_device 驱动会通过调用 v4l2_device_register_subdev_nodes() +函数为所有已注册并设置了 V4L2_SUBDEV_FL_HAS_DEVNODE 的子设备创建 +设备节点。这些设备节点会在子设备注销时自动删除。 + +这些设备节点处理 V4L2 API 的一个子集。 + +VIDIOC_QUERYCTRL +VIDIOC_QUERYMENU +VIDIOC_G_CTRL +VIDIOC_S_CTRL +VIDIOC_G_EXT_CTRLS +VIDIOC_S_EXT_CTRLS +VIDIOC_TRY_EXT_CTRLS + + 这些 ioctls 控制与 V4L2 中定义的一致。他们行为相同，唯一的 + 不同是他们只处理子设备的控制实现。根据驱动程序，这些控制也 + 可以通过一个（或多个） V4L2 设备节点访问。 + +VIDIOC_DQEVENT +VIDIOC_SUBSCRIBE_EVENT +VIDIOC_UNSUBSCRIBE_EVENT + + 这些 ioctls 事件与 V4L2 中定义的一致。他们行为相同，唯一的 + 不同是他们只处理子设备产生的事件。根据驱动程序，这些事件也 + 可以通过一个（或多个） V4L2 设备节点上报。 + + 要使用事件通知的子设备驱动，在注册子设备前必须在 v4l2_subdev::flags + 中设置 V4L2_SUBDEV_USES_EVENTS 并在 v4l2_subdev::nevents + 中初始化事件队列深度。注册完成后，事件会在 v4l2_subdev::devnode + 设备节点中像通常一样被排队。 + + 为正确支持事件机制，poll() 文件操作也应被实现。 + +私有 ioctls + + 不在以上列表中的所有 ioctls 会通过 core::ioctl 操作直接传递 + 给子设备驱动。 + + +I2C 子设备驱动 +------------- + +由于这些驱动很常见，所以内特提供了特定的辅助函数(v4l2-common.h)让这些 +设备的使用更加容易。 + +添加 v4l2_subdev 支持的推荐方法是让 I2C 驱动将 v4l2_subdev 结构体 +嵌入到为每个 I2C 设备实例创建的状态结构体中。而最简单的设备没有状态 +结构体，此时可以直接创建一个 v4l2_subdev 结构体。 + +一个典型的状态结构体如下所示（‘chipname’用芯片名代替）： + +struct chipname_state { + struct v4l2_subdev sd; + ... /* 附加的状态域*/ +}; + +初始化 v4l2_subdev 结构体的方法如下： + + v4l2_i2c_subdev_init(&state->sd, client, subdev_ops); + +这个函数将填充 v4l2_subdev 结构体中的所有域，并保证 v4l2_subdev 和 +i2c_client 都指向彼此。 + +同时，你也应该为从 v4l2_subdev 指针找到 chipname_state 结构体指针 +添加一个辅助内联函数。 + +static inline struct chipname_state *to_state(struct v4l2_subdev *sd) +{ + return container_of(sd, struct chipname_state, sd); +} + +使用以下函数可以通过 v4l2_subdev 结构体指针获得 i2c_client 结构体 +指针： + + struct i2c_client *client = v4l2_get_subdevdata(sd); + +而以下函数则相反，通过 i2c_client 结构体指针获得 v4l2_subdev 结构体 +指针： + + struct v4l2_subdev *sd = i2c_get_clientdata(client); + +当 remove()函数被调用前，必须保证先调用 v4l2_device_unregister_subdev(sd)。 +此操作将会从桥驱动中注销子设备。即使子设备没有注册，调用此函数也是 +安全的。 + +必须这样做的原因是：当桥驱动注销 i2c 适配器时，remove()回调函数 +会被那个适配器上的 i2c 设备调用。此后，相应的 v4l2_subdev 结构体 +就不存在了，所有它们必须先被注销。在 remove()回调函数中调用 +v4l2_device_unregister_subdev(sd)，可以保证执行总是正确的。 + + +桥驱动也有一些辅组函数可用： + +struct v4l2_subdev *sd = v4l2_i2c_new_subdev(v4l2_dev, adapter, + "module_foo", "chipid", 0x36, NULL); + +这个函数会加载给定的模块（如果没有模块需要加载，可以为 NULL）， +并用给定的 i2c 适配器结构体指针（i2c_adapter）和 器件地址（chip/address） +作为参数调用 i2c_new_device()。如果一切顺利，则就在 v4l2_device +中注册了子设备。 + +你也可以利用 v4l2_i2c_new_subdev()的最后一个参数，传递一个可能的 +I2C 地址数组，让函数自动探测。这些探测地址只有在前一个参数为 0 的 +情况下使用。非零参数意味着你知道准确的 i2c 地址，所以此时无须进行 +探测。 + +如果出错，两个函数都返回 NULL。 + +注意：传递给 v4l2_i2c_new_subdev()的 chipid 通常与模块名一致。 +它允许你指定一个芯片的变体，比如“saa7114”或“saa7115”。一般通过 +i2c 驱动自动探测。chipid 的使用是在今后需要深入了解的事情。这个与 +i2c 驱动不同，较容易混淆。要知道支持哪些芯片变体，你可以查阅 i2c +驱动代码的 i2c_device_id 表，上面列出了所有可能支持的芯片。 + +还有两个辅助函数： + +v4l2_i2c_new_subdev_cfg：这个函数添加新的 irq 和 platform_data +参数，并有‘addr’和‘probed_addrs’参数：如果 addr 非零，则被使用 +（不探测变体），否则 probed_addrs 中的地址将用于自动探测。 + +例如：以下代码将会探测地址（0x10）： + +struct v4l2_subdev *sd = v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, + "module_foo", "chipid", 0, NULL, 0, I2C_ADDRS(0x10)); + +v4l2_i2c_new_subdev_board 使用一个 i2c_board_info 结构体，将其 +替代 irq、platform_data 和 add r参数传递给 i2c 驱动。 + +如果子设备支持 s_config 核心操作，这个操作会在子设备配置好之后以 irq 和 +platform_data 为参数调用。早期的 v4l2_i2c_new_(probed_)subdev 函数 +同样也会调用 s_config，但仅在 irq 为 0 且 platform_data 为 NULL 时。 + +video_device结构体 +----------------- + +在 /dev 目录下的实际设备节点根据 video_device 结构体(v4l2-dev.h) +创建。此结构体既可以动态分配也可以嵌入到一个更大的结构体中。 + +动态分配方法如下： + + struct video_device *vdev = video_device_alloc(); + + if (vdev == NULL) + return -ENOMEM; + + vdev->release = video_device_release; + +如果将其嵌入到一个大结构体中，则必须自己实现 release()回调。 + + struct video_device *vdev = &my_vdev->vdev; + + vdev->release = my_vdev_release; + +release()回调必须被设置，且在最后一个 video_device 用户退出之后 +被调用。 + +默认的 video_device_release()回调只是调用 kfree 来释放之前分配的 +内存。 + +你应该设置这些域： + +- v4l2_dev: 设置为 v4l2_device 父设备。 + +- name: 设置为唯一的描述性设备名。 + +- fops: 设置为已有的 v4l2_file_operations 结构体。 + +- ioctl_ops: 如果你使用v4l2_ioctl_ops 来简化 ioctl 的维护 + (强烈建议使用，且将来可能变为强制性的!)，然后设置你自己的 + v4l2_ioctl_ops 结构体. + +- lock: 如果你要在驱动中实现所有的锁操作，则设为 NULL 。否则 + 就要设置一个指向 struct mutex_lock 结构体的指针，这个锁将 + 在 unlocked_ioctl 文件操作被调用前由内核获得，并在调用返回后 + 释放。详见下一节。 + +- prio: 保持对优先级的跟踪。用于实现 VIDIOC_G/S_PRIORITY。如果 + 设置为 NULL，则会使用 v4l2_device 中的 v4l2_prio_state 结构体。 + 如果要对每个设备节点（组）实现独立的优先级，可以将其指向自己 + 实现的 v4l2_prio_state 结构体。 + +- parent: 仅在使用 NULL 作为父设备结构体参数注册 v4l2_device 时 + 设置此参数。只有在一个硬件设备包含多一个 PCI 设备，共享同一个 + v4l2_device 核心时才会发生。 + + cx88 驱动就是一个例子：一个 v4l2_device 结构体核心，被一个裸的 + 视频 PCI 设备(cx8800)和一个 MPEG PCI 设备(cx8802)共用。由于 + v4l2_device 无法与特定的 PCI 设备关联，所有没有设置父设备。但当 + video_device 配置后，就知道使用哪个父 PCI 设备了。 + +- flags：可选。如果你要让框架处理设置 VIDIOC_G/S_PRIORITY ioctls， + 请设置 V4L2_FL_USE_FH_PRIO。这要求你使用 v4l2_fh 结构体。 + 一旦所有驱动使用了核心的优先级处理，最终这个标志将消失。但现在它 + 必须被显式设置。 + +如果你使用 v4l2_ioctl_ops，则应该在 v4l2_file_operations 结构体中 +设置 .unlocked_ioctl 指向 video_ioctl2。 + +请勿使用 .ioctl！它已被废弃，今后将消失。 + +某些情况下你要告诉核心：你在 v4l2_ioctl_ops 指定的某个函数应被忽略。 +你可以在 video_device_register 被调用前通过以下函数标记这个 ioctls。 + +void v4l2_disable_ioctl(struct video_device *vdev, unsigned int cmd); + +基于外部因素（例如某个板卡已被使用），在不创建新结构体的情况下，你想 +要关闭 v4l2_ioctl_ops 中某个特性往往需要这个机制。 + +v4l2_file_operations 结构体是 file_operations 的一个子集。其主要 +区别在于：因 inode 参数从未被使用，它将被忽略。 + +如果需要与媒体框架整合，你必须通过调用 media_entity_init() 初始化 +嵌入在 video_device 结构体中的 media_entity（entity 域）结构体： + + struct media_pad *pad = &my_vdev->pad; + int err; + + err = media_entity_init(&vdev->entity, 1, pad, 0); + +pads 数组必须预先初始化。没有必要手动设置 media_entity 的 type 和 +name 域。 + +当（任何）子设备节点被打开/关闭，对 entity 的引用将被自动获取/释放。 + +v4l2_file_operations 与锁 +-------------------------- + +你可以在 video_device 结构体中设置一个指向 mutex_lock 的指针。通常 +这既可是一个顶层互斥锁也可为设备节点自身的互斥锁。默认情况下，此锁 +用于 unlocked_ioctl，但为了使用 ioctls 你通过以下函数可禁用锁定： + + void v4l2_disable_ioctl_locking(struct video_device *vdev, unsigned int cmd); + +例如: v4l2_disable_ioctl_locking(vdev, VIDIOC_DQBUF); + +你必须在注册 video_device 前调用这个函数。 + +特别是对于 USB 驱动程序，某些命令（如设置控制）需要很长的时间，可能 +需要自行为缓冲区队列的 ioctls 实现锁定。 + +如果你需要更细粒度的锁，你必须设置 mutex_lock 为 NULL，并完全自己实现 +锁机制。 + +这完全由驱动开发者决定使用何种方法。然而，如果你的驱动存在长延时操作 +（例如，改变 USB 摄像头的曝光时间可能需要较长时间），而你又想让用户 +在等待长延时操作完成期间做其他的事，则你最好自己实现锁机制。 + +如果指定一个锁，则所有 ioctl 操作将在这个锁的作用下串行执行。如果你 +使用 videobuf，则必须将同一个锁传递给 videobuf 队列初始化函数；如 +videobuf 必须等待一帧的到达，则可临时解锁并在这之后重新上锁。如果驱动 +也在代码执行期间等待，则可做同样的工作（临时解锁，再上锁）让其他进程 +可以在第一个进程阻塞时访问设备节点。 + +在使用 videobuf2 的情况下，必须实现 wait_prepare 和 wait_finish 回调 +在适当的时候解锁/加锁。进一步来说，如果你在 video_device 结构体中使用 +锁，则必须在 wait_prepare 和 wait_finish 中对这个互斥锁进行解锁/加锁。 + +热插拔的断开实现也必须在调用 v4l2_device_disconnect 前获得锁。 + +video_device注册 +--------------- + +接下来你需要注册视频设备：这会为你创建一个字符设备。 + + err = video_register_device(vdev, VFL_TYPE_GRABBER, -1); + if (err) { + video_device_release(vdev); /* or kfree(my_vdev); */ + return err; + } + +如果 v4l2_device 父设备的 mdev 域为非 NULL 值，视频设备实体将自动 +注册为媒体设备。 + +注册哪种设备是根据类型（type）参数。存在以下类型： + +VFL_TYPE_GRABBER: 用于视频输入/输出设备的 videoX +VFL_TYPE_VBI: 用于垂直消隐数据的 vbiX (例如，隐藏式字幕，图文电视) +VFL_TYPE_RADIO: 用于广播调谐器的 radioX + +最后一个参数让你确定一个所控制设备的设备节点号数量(例如 videoX 中的 X)。 +通常你可以传入-1，让 v4l2 框架自己选择第一个空闲的编号。但是有时用户 +需要选择一个特定的节点号。驱动允许用户通过驱动模块参数选择一个特定的 +设备节点号是很普遍的。这个编号将会传递给这个函数，且 video_register_device +将会试图选择这个设备节点号。如果这个编号被占用，下一个空闲的设备节点 +编号将被选中，并向内核日志中发送一个警告信息。 + +另一个使用场景是当驱动创建多个设备时。这种情况下，对不同的视频设备在 +编号上使用不同的范围是很有用的。例如，视频捕获设备从 0 开始，视频 +输出设备从 16 开始。所以你可以使用最后一个参数来指定设备节点号最小值， +而 v4l2 框架会试图选择第一个的空闲编号（等于或大于你提供的编号）。 +如果失败，则它会就选择第一个空闲的编号。 + +由于这种情况下，你会忽略无法选择特定设备节点号的警告，则可调用 +video_register_device_no_warn() 函数避免警告信息的产生。 + +只要设备节点被创建，一些属性也会同时创建。在 /sys/class/video4linux +目录中你会找到这些设备。例如进入其中的 video0 目录，你会看到‘name’和 +‘index’属性。‘name’属性值就是 video_device 结构体中的‘name’域。 + +‘index’属性值就是设备节点的索引值：每次调用 video_register_device()， +索引值都递增 1 。第一个视频设备节点总是从索引值 0 开始。 + +用户可以设置 udev 规则，利用索引属性生成花哨的设备名（例如：用‘mpegX’ +代表 MPEG 视频捕获设备节点）。 + +在设备成功注册后，就可以使用这些域： + +- vfl_type: 传递给 video_register_device 的设备类型。 +- minor: 已指派的次设备号。 +- num: 设备节点编号 (例如 videoX 中的 X)。 +- index: 设备索引号。 + +如果注册失败，你必须调用 video_device_release() 来释放已分配的 +video_device 结构体；如果 video_device 是嵌入在自己创建的结构体中， +你也必须释放它。vdev->release() 回调不会在注册失败之后被调用， +你也不应试图在注册失败后注销设备。 + + +video_device 注销 +---------------- + +当视频设备节点已被移除，不论是卸载驱动还是USB设备断开，你都应注销 +它们： + + video_unregister_device(vdev); + +这个操作将从 sysfs 中移除设备节点（导致 udev 将其从 /dev 中移除）。 + +video_unregister_device() 返回之后，就无法完成打开操作。尽管如此， +USB 设备的情况则不同，某些应用程序可能依然打开着其中一个已注销设备 +节点。所以在注销之后，所有文件操作（当然除了 release ）也应返回错误值。 + +当最后一个视频设备节点的用户退出，则 vdev->release() 回调会被调用， +并且你可以做最后的清理操作。 + +不要忘记清理与视频设备相关的媒体入口（如果被初始化过）： + + media_entity_cleanup(&vdev->entity); + +这可以在 release 回调中完成。 + + +video_device 辅助函数 +--------------------- + +一些有用的辅助函数如下： + +- file/video_device 私有数据 + +你可以用以下函数在 video_device 结构体中设置/获取驱动私有数据： + +void *video_get_drvdata(struct video_device *vdev); +void video_set_drvdata(struct video_device *vdev, void *data); + +注意：在调用 video_register_device() 前执行 video_set_drvdata() +是安全的。 + +而以下函数： + +struct video_device *video_devdata(struct file *file); + +返回 file 结构体中拥有的的 video_device 指针。 + +video_drvdata 辅助函数结合了 video_get_drvdata 和 video_devdata +的功能： + +void *video_drvdata(struct file *file); + +你可以使用如下代码从 video_device 结构体中获取 v4l2_device 结构体 +指针： + +struct v4l2_device *v4l2_dev = vdev->v4l2_dev; + +- 设备节点名 + +video_device 设备节点在内核中的名称可以通过以下函数获得 + +const char *video_device_node_name(struct video_device *vdev); + +这个名字被用户空间工具（例如 udev）作为提示信息使用。应尽可能使用 +此功能，而非访问 video_device::num 和 video_device::minor 域。 + + +视频缓冲辅助函数 +--------------- + +v4l2 核心 API 提供了一个处理视频缓冲的标准方法(称为“videobuf”)。 +这些方法使驱动可以通过统一的方式实现 read()、mmap() 和 overlay()。 +目前在设备上支持视频缓冲的方法有分散/聚集 DMA(videobuf-dma-sg)、 +线性 DMA(videobuf-dma-contig)以及大多用于 USB 设备的用 vmalloc +分配的缓冲(videobuf-vmalloc)。 + +请参阅 Documentation/video4linux/videobuf，以获得更多关于 videobuf +层的使用信息。 + +v4l2_fh 结构体 +------------- + +v4l2_fh 结构体提供一个保存用于 V4L2 框架的文件句柄特定数据的简单方法。 +如果 video_device 的 flag 设置了 V4L2_FL_USE_FH_PRIO 标志，新驱动 +必须使用 v4l2_fh 结构体，因为它也用于实现优先级处理（VIDIOC_G/S_PRIORITY）。 + +v4l2_fh 的用户（位于 V4l2 框架中，并非驱动）可通过测试 +video_device->flags 中的 V4L2_FL_USES_V4L2_FH 位得知驱动是否使用 +v4l2_fh 作为他的 file->private_data 指针。这个位会在调用 v4l2_fh_init() +时被设置。 + +v4l2_fh 结构体作为驱动自身文件句柄结构体的一部分被分配，且驱动在 +其打开函数中将 file->private_data 指向它。 + +在许多情况下，v4l2_fh 结构体会嵌入到一个更大的结构体中。这钟情况下， +应该在 open() 中调用 v4l2_fh_init+v4l2_fh_add，并在 release() 中 +调用 v4l2_fh_del+v4l2_fh_exit。 + +驱动可以通过使用 container_of 宏提取他们自己的文件句柄结构体。例如： + +struct my_fh { + int blah; + struct v4l2_fh fh; +}; + +... + +int my_open(struct file *file) +{ + struct my_fh *my_fh; + struct video_device *vfd; + int ret; + + ... + + my_fh = kzalloc(sizeof(*my_fh), GFP_KERNEL); + + ... + + v4l2_fh_init(&my_fh->fh, vfd); + + ... + + file->private_data = &my_fh->fh; + v4l2_fh_add(&my_fh->fh); + return 0; +} + +int my_release(struct file *file) +{ + struct v4l2_fh *fh = file->private_data; + struct my_fh *my_fh = container_of(fh, struct my_fh, fh); + + ... + v4l2_fh_del(&my_fh->fh); + v4l2_fh_exit(&my_fh->fh); + kfree(my_fh); + return 0; +} + +以下是 v4l2_fh 函数使用的简介： + +void v4l2_fh_init(struct v4l2_fh *fh, struct video_device *vdev) + + 初始化文件句柄。这*必须*在驱动的 v4l2_file_operations->open() + 函数中执行。 + +void v4l2_fh_add(struct v4l2_fh *fh) + + 添加一个 v4l2_fh 到 video_device 文件句柄列表。一旦文件句柄 + 初始化完成就必须调用。 + +void v4l2_fh_del(struct v4l2_fh *fh) + + 从 video_device() 中解除文件句柄的关联。文件句柄的退出函数也 + 将被调用。 + +void v4l2_fh_exit(struct v4l2_fh *fh) + + 清理文件句柄。在清理完 v4l2_fh 后，相关内存会被释放。 + + +如果 v4l2_fh 不是嵌入在其他结构体中的，则可以用这些辅助函数： + +int v4l2_fh_open(struct file *filp) + + 分配一个 v4l2_fh 结构体空间，初始化并将其添加到 file 结构体相关的 + video_device 结构体中。 + +int v4l2_fh_release(struct file *filp) + + 从 file 结构体相关的 video_device 结构体中删除 v4l2_fh ，清理 + v4l2_fh 并释放空间。 + +这两个函数可以插入到 v4l2_file_operation 的 open() 和 release() +操作中。 + + +某些驱动需要在第一个文件句柄打开和最后一个文件句柄关闭的时候做些 +工作。所以加入了两个辅助函数以检查 v4l2_fh 结构体是否是相关设备 +节点打开的唯一文件句柄。 + +int v4l2_fh_is_singular(struct v4l2_fh *fh) + + 如果此文件句柄是唯一打开的文件句柄，则返回 1 ，否则返回 0 。 + +int v4l2_fh_is_singular_file(struct file *filp) + + 功能相同，但通过 filp->private_data 调用 v4l2_fh_is_singular。 + + +V4L2 事件机制 +----------- + +V4L2 事件机制提供了一个通用的方法将事件传递到用户空间。驱动必须使用 +v4l2_fh 才能支持 V4L2 事件机制。 + + +事件通过一个类型和选择 ID 来定义。ID 对应一个 V4L2 对象，例如 +一个控制 ID。如果未使用，则 ID 为 0。 + +当用户订阅一个事件，驱动会为此分配一些 kevent 结构体。所以每个 +事件组（类型、ID）都会有自己的一套 kevent 结构体。这保证了如果 +一个驱动短时间内产生了许多同类事件，不会覆盖其他类型的事件。 + +但如果你收到的事件数量大于同类事件 kevent 的保存数量，则最早的 +事件将被丢弃，并加入新事件。 + +此外，v4l2_subscribed_event 结构体内部有可供驱动设置的 merge() 和 +replace() 回调，这些回调会在新事件产生且没有多余空间的时候被调用。 +replace() 回调让你可以将早期事件的净荷替换为新事件的净荷，将早期 +净荷的相关数据合并到替换进来的新净荷中。当该类型的事件仅分配了一个 +kevent 结构体时，它将被调用。merge() 回调让你可以合并最早的事件净荷 +到在它之后的那个事件净荷中。当该类型的事件分配了两个或更多 kevent +结构体时，它将被调用。 + +这种方法不会有状态信息丢失，只会导致中间步骤信息丢失。 + + +关于 replace/merge 回调的一个不错的例子在 v4l2-event.c 中：用于 +控制事件的 ctrls_replace() 和 ctrls_merge() 回调。 + +注意：这些回调可以在中断上下文中调用，所以它们必须尽快完成并退出。 + +有用的函数： + +void v4l2_event_queue(struct video_device *vdev, const struct v4l2_event *ev) + + 将事件加入视频设备的队列。驱动仅负责填充 type 和 data 域。 + 其他域由 V4L2 填充。 + +int v4l2_event_subscribe(struct v4l2_fh *fh, + struct v4l2_event_subscription *sub, unsigned elems, + const struct v4l2_subscribed_event_ops *ops) + + video_device->ioctl_ops->vidioc_subscribe_event 必须检测驱动能 + 产生特定 id 的事件。然后调用 v4l2_event_subscribe() 来订阅该事件。 + + elems 参数是该事件的队列大小。若为 0，V4L2 框架将会（根据事件类型） + 填充默认值。 + + ops 参数允许驱动指定一系列回调： + * add: 当添加一个新监听者时调用（重复订阅同一个事件，此回调 + 仅被执行一次）。 + * del: 当一个监听者停止监听时调用。 + * replace: 用‘新’事件替换‘早期‘事件。 + * merge: 将‘早期‘事件合并到‘新’事件中。 + 这四个调用都是可选的，如果不想指定任何回调，则 ops 可为 NULL。 + +int v4l2_event_unsubscribe(struct v4l2_fh *fh, + struct v4l2_event_subscription *sub) + + v4l2_ioctl_ops 结构体中的 vidioc_unsubscribe_event 回调函数。 + 驱动程序可以直接使用 v4l2_event_unsubscribe() 实现退订事件过程。 + + 特殊的 V4L2_EVENT_ALL 类型，可用于退订所有事件。驱动可能在特殊 + 情况下需要做此操作。 + +int v4l2_event_pending(struct v4l2_fh *fh) + + 返回未决事件的数量。有助于实现轮询（poll）操作。 + +事件通过 poll 系统调用传递到用户空间。驱动可用 +v4l2_fh->wait (wait_queue_head_t 类型)作为参数调用 poll_wait()。 + +事件分为标准事件和私有事件。新的标准事件必须使用可用的最小事件类型 +编号。驱动必须从他们本类型的编号起始处分配事件。类型的编号起始为 +V4L2_EVENT_PRIVATE_START + n * 1000 ，其中 n 为可用最小编号。每个 +类型中的第一个事件类型编号是为以后的使用保留的，所以第一个可用事件 +类型编号是‘class base + 1’。 + +V4L2 事件机制的使用实例可以在 OMAP3 ISP 的驱动 +(drivers/media/video/omap3isp)中找到。 diff --git a/MAINTAINERS b/MAINTAINERS index 0709df21b8a25c8199f7814dee3973e105f56aa5..eae3cd86831e2bda0f1416096a9957e94bfa7677 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -184,6 +184,16 @@ S: Maintained F: Documentation/filesystems/9p.txt F: fs/9p/ +A8293 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/a8293* + AACRAID SCSI RAID DRIVER M: Adaptec OEM Raid Solutions L: linux-scsi@vger.kernel.org @@ -391,6 +401,26 @@ M: Riccardo Facchetti S: Maintained F: sound/oss/aedsp16.c +AF9013 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/af9013* + +AF9033 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/af9033* + AFFS FILE SYSTEM L: linux-fsdevel@vger.kernel.org S: Orphan @@ -572,7 +602,7 @@ F: drivers/net/appletalk/ F: net/appletalk/ ARASAN COMPACT FLASH PATA CONTROLLER -M: Viresh Kumar +M: Viresh Kumar L: linux-ide@vger.kernel.org S: Maintained F: include/linux/pata_arasan_cf_data.h @@ -595,7 +625,6 @@ M: Will Deacon S: Maintained F: arch/arm/kernel/perf_event* F: arch/arm/oprofile/common.c -F: arch/arm/kernel/pmu.c F: arch/arm/include/asm/pmu.h F: arch/arm/kernel/hw_breakpoint.c F: arch/arm/include/asm/hw_breakpoint.h @@ -658,13 +687,6 @@ W: http://www.linux4sam.org S: Supported F: arch/arm/mach-at91/ -ARM/BCMRING ARM ARCHITECTURE -M: Jiandong Zheng -M: Scott Branden -L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) -S: Maintained -F: arch/arm/mach-bcmring - ARM/CALXEDA HIGHBANK ARCHITECTURE M: Rob Herring L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -768,6 +790,7 @@ S: Maintained T: git git://git.pengutronix.de/git/imx/linux-2.6.git F: arch/arm/mach-imx/ F: arch/arm/plat-mxc/ +F: arch/arm/configs/imx*_defconfig ARM/FREESCALE IMX6 M: Shawn Guo @@ -904,6 +927,12 @@ W: http://www.digriz.org.uk/ts78xx/kernel S: Maintained F: arch/arm/mach-orion5x/ts78xx-* +ARM/MICREL KS8695 ARCHITECTURE +M: Greg Ungerer +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +F: arch/arm/mach-ks8695 +S: Odd Fixes + ARM/MIOA701 MACHINE SUPPORT M: Robert Jarzmik L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -1064,7 +1093,7 @@ L: linux-media@vger.kernel.org S: Maintained F: arch/arm/plat-s5p/dev-fimc* F: arch/arm/plat-samsung/include/plat/*fimc* -F: drivers/media/video/s5p-fimc/ +F: drivers/media/platform/s5p-fimc/ ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT M: Kyungmin Park @@ -1074,7 +1103,7 @@ L: linux-arm-kernel@lists.infradead.org L: linux-media@vger.kernel.org S: Maintained F: arch/arm/plat-s5p/dev-mfc.c -F: drivers/media/video/s5p-mfc/ +F: drivers/media/platform/s5p-mfc/ ARM/SAMSUNG S5P SERIES TV SUBSYSTEM SUPPORT M: Kyungmin Park @@ -1082,7 +1111,7 @@ M: Tomasz Stanislawski L: linux-arm-kernel@lists.infradead.org L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/video/s5p-tv/ +F: drivers/media/platform/s5p-tv/ ARM/SHMOBILE ARM ARCHITECTURE M: Paul Mundt @@ -1200,6 +1229,12 @@ S: Maintained F: arch/arm/mach-pxa/z2.c F: arch/arm/mach-pxa/include/mach/z2.h +ARM64 PORT (AARCH64 ARCHITECTURE) +M: Catalin Marinas +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm64/ + ASC7621 HARDWARE MONITOR DRIVER M: George Joseph L: lm-sensors@lm-sensors.org @@ -1241,7 +1276,7 @@ F: include/linux/i2c/at24.h ATA OVER ETHERNET (AOE) DRIVER M: "Ed L. Cashin" -W: http://www.coraid.com/support/linux +W: http://support.coraid.com/support/linux S: Supported F: Documentation/aoe/ F: drivers/block/aoe/ @@ -1348,7 +1383,7 @@ ATMEL ISI DRIVER M: Josh Wu L: linux-media@vger.kernel.org S: Supported -F: drivers/media/video/atmel-isi.c +F: drivers/media/platform/atmel-isi.c F: include/media/atmel-isi.h ATMEL LCDFB DRIVER @@ -1604,6 +1639,16 @@ L: netdev@vger.kernel.org S: Supported F: drivers/net/ethernet/broadcom/bnx2x/ +BROADCOM BCM2835 ARM ARCHICTURE +M: Stephen Warren +L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers) +T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git +S: Maintained +F: arch/arm/mach-bcm2835/ +F: arch/arm/boot/dts/bcm2835* +F: arch/arm/configs/bcm2835_defconfig +F: drivers/*/*bcm2835* + BROADCOM TG3 GIGABIT ETHERNET DRIVER M: Matt Carlson M: Michael Chan @@ -1636,7 +1681,6 @@ F: drivers/bcma/ F: include/linux/bcma/ BROCADE BFA FC SCSI DRIVER -M: Jing Huang M: Krishna C Gudipati L: linux-scsi@vger.kernel.org S: Supported @@ -1686,7 +1730,7 @@ W: http://linuxtv.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained F: Documentation/video4linux/bttv/ -F: drivers/media/video/bt8xx/bttv* +F: drivers/media/pci/bt8xx/bttv* C-MEDIA CMI8788 DRIVER M: Clemens Ladisch @@ -1716,7 +1760,7 @@ L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained F: Documentation/video4linux/cafe_ccic -F: drivers/media/video/marvell-ccic/ +F: drivers/media/platform/marvell-ccic/ CAIF NETWORK LAYER M: Sjur Braendeland @@ -2105,7 +2149,17 @@ W: http://linuxtv.org W: http://www.ivtvdriver.org/index.php/Cx18 S: Maintained F: Documentation/video4linux/cx18.txt -F: drivers/media/video/cx18/ +F: drivers/media/pci/cx18/ + +CXD2820R MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/cxd2820r* CXGB3 ETHERNET DRIVER (CXGB3) M: Divy Le Ray @@ -2208,7 +2262,7 @@ S: Maintained F: drivers/scsi/tmscsim.* DC395x SCSI driver -M: Oliver Neukum +M: Oliver Neukum M: Ali Akcaagac M: Jamie Lenehan W: http://twibble.org/dist/dc395x/ @@ -2460,6 +2514,117 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/wan/dscc4.c +DVB_USB_AF9015 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/af9015* + +DVB_USB_AF9035 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/af9035* + +DVB_USB_ANYSEE MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/anysee* + +DVB_USB_AU6610 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/au6610* + +DVB_USB_CE6230 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/ce6230* + +DVB_USB_CXUSB MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/cxusb* + +DVB_USB_CYPRESS_FIRMWARE MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/cypress_firmware* + +DVB_USB_EC168 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/ec168* + +DVB_USB_MXL111SF MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/mxl111sf.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/mxl111sf* + +DVB_USB_RTL28XXU MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/rtl28xxu* + +DVB_USB_V2 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/dvb_usb* +F: drivers/media/usb/dvb-usb-v2/usb_urb.c + DYNAMIC DEBUG M: Jason Baron S: Maintained @@ -2471,6 +2636,16 @@ M: "Maciej W. Rozycki" S: Maintained F: drivers/tty/serial/dz.* +E4000 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/e4000* + EATA-DMA SCSI DRIVER M: Michael Neuffer L: linux-eata@i-connect.net @@ -2499,6 +2674,16 @@ S: Maintained F: include/linux/netfilter_bridge/ebt_*.h F: net/bridge/netfilter/ebt*.c +EC100 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/ec100* + ECRYPT FILE SYSTEM M: Tyler Hicks M: Dustin Kirkland @@ -2618,6 +2803,18 @@ T: git git://git.alsa-project.org/alsa-kernel.git S: Maintained F: sound/usb/misc/ua101.c +EXTENSIBLE FIRMWARE INTERFACE (EFI) +M: Matt Fleming +L: linux-efi@vger.kernel.org +S: Maintained +F: Documentation/x86/efi-stub.txt +F: arch/ia64/kernel/efi.c +F: arch/x86/boot/compressed/eboot.[ch] +F: arch/x86/include/asm/efi.h +F: arch/x86/platform/efi/* +F: drivers/firmware/efivars.c +F: include/linux/efi*.h + EFIFB FRAMEBUFFER DRIVER L: linux-fbdev@vger.kernel.org M: Peter Jones @@ -2769,8 +2966,18 @@ FC0011 TUNER DRIVER M: Michael Buesch L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/common/tuners/fc0011.h -F: drivers/media/common/tuners/fc0011.c +F: drivers/media/tuners/fc0011.h +F: drivers/media/tuners/fc0011.c + +FC2580 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/fc2580* FANOTIFY M: Eric Paris @@ -2850,7 +3057,9 @@ F: include/linux/firewire*.h F: tools/firewire/ FIRMWARE LOADER (request_firmware) -S: Orphan +M: Ming Lei +L: linux-kernel@vger.kernel.org +S: Maintained F: Documentation/firmware_class/ F: drivers/base/firmware*.c F: include/linux/firmware.h @@ -2998,7 +3207,7 @@ M: Kyungmin Park M: Heungjun Kim L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/video/m5mols/ +F: drivers/media/i2c/m5mols/ F: include/media/m5mols.h FUJITSU TABLET EXTRAS @@ -3096,6 +3305,7 @@ T: git git://git.secretlab.ca/git/linux-2.6.git F: Documentation/gpio.txt F: drivers/gpio/ F: include/linux/gpio* +F: include/asm-generic/gpio.h GRE DEMULTIPLEXER DRIVER M: Dmitry Kozlov @@ -3115,49 +3325,56 @@ M: Frank Zago L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/finepix.c +F: drivers/media/usb/gspca/finepix.c GSPCA GL860 SUBDRIVER M: Olivier Lorin L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/gl860/ +F: drivers/media/usb/gspca/gl860/ GSPCA M5602 SUBDRIVER M: Erik Andren L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/m5602/ +F: drivers/media/usb/gspca/m5602/ GSPCA PAC207 SONIXB SUBDRIVER M: Hans de Goede L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/pac207.c +F: drivers/media/usb/gspca/pac207.c GSPCA SN9C20X SUBDRIVER M: Brian Johnson L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/sn9c20x.c +F: drivers/media/usb/gspca/sn9c20x.c GSPCA T613 SUBDRIVER M: Leandro Costantino L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/t613.c +F: drivers/media/usb/gspca/t613.c GSPCA USB WEBCAM DRIVER M: Hans de Goede L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/ +F: drivers/media/usb/gspca/ + +STK1160 USB VIDEO CAPTURE DRIVER +M: Ezequiel Garcia +L: linux-media@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git +S: Maintained +F: drivers/media/usb/stk1160/ HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER M: Frank Seidel @@ -3211,6 +3428,16 @@ L: linux-parisc@vger.kernel.org S: Maintained F: sound/parisc/harmony.* +HD29L2 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/hd29l2* + HEWLETT-PACKARD SMART2 RAID DRIVER M: Chirag Kantharia L: iss_storagedev@hp.com @@ -3379,7 +3606,7 @@ M: "Wolfram Sang (embedded platforms)" L: linux-i2c@vger.kernel.org W: http://i2c.wiki.kernel.org/ T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/ -T: git git://git.fluff.org/bjdooks/linux.git +T: git git://git.pengutronix.de/git/wsa/linux.git S: Maintained F: Documentation/i2c/ F: drivers/i2c/ @@ -3411,6 +3638,18 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux.git S: Maintained F: arch/ia64/ +IBM Power in-Nest Crypto Acceleration +M: Kent Yoder +L: linux-crypto@vger.kernel.org +S: Supported +F: drivers/crypto/nx/ + +IBM Power 842 compression accelerator +M: Robert Jennings +S: Supported +F: drivers/crypto/nx/nx-842.c +F: include/linux/nx842.h + IBM Power Linux RAID adapter M: Brian King S: Supported @@ -3422,6 +3661,13 @@ L: netdev@vger.kernel.org S: Supported F: drivers/net/ethernet/ibm/ibmveth.* +IBM Power Virtual SCSI/FC Device Drivers +M: Robert Jennings +L: linux-scsi@vger.kernel.org +S: Supported +F: drivers/scsi/ibmvscsi/ +X: drivers/scsi/ibmvscsi/ibmvstgt.c + IBM ServeRAID RAID DRIVER P: Jack Hammer M: Dave Jeffery @@ -3543,11 +3789,12 @@ K: \b(ABS|SYN)_MT_ INTEL C600 SERIES SAS CONTROLLER DRIVER M: Intel SCU Linux support +M: Lukasz Dorau +M: Maciej Patelczyk M: Dave Jiang -M: Ed Nadolski L: linux-scsi@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git -S: Maintained +T: git git://git.code.sf.net/p/intel-sas/isci +S: Supported F: drivers/scsi/isci/ F: firmware/isci/ @@ -3657,11 +3904,12 @@ F: Documentation/networking/README.ipw2200 F: drivers/net/wireless/ipw2x00/ INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT) -M: Joseph Cihula +M: Richard L Maliszewski +M: Gang Wei M: Shane Wang L: tboot-devel@lists.sourceforge.net W: http://tboot.sourceforge.net -T: Mercurial http://www.bughost.org/repos.hg/tboot.hg +T: hg http://tboot.hg.sourceforge.net:8000/hgroot/tboot/tboot S: Supported F: Documentation/intel_txt.txt F: include/linux/tboot.h @@ -3856,7 +4104,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://www.ivtvdriver.org S: Maintained F: Documentation/video4linux/*.ivtv -F: drivers/media/video/ivtv/ +F: drivers/media/pci/ivtv/ F: include/linux/ivtv* JC42.4 TEMPERATURE SENSOR DRIVER @@ -4150,6 +4398,26 @@ W: http://legousb.sourceforge.net/ S: Maintained F: drivers/usb/misc/legousbtower.c +LG2160 MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/dvb-frontends/lg2160.* + +LGDT3305 MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/dvb-frontends/lgdt3305.* + LGUEST M: Rusty Russell L: lguest@lists.ozlabs.org @@ -4528,7 +4796,7 @@ S: Supported F: arch/microblaze/ MICROTEK X6 SCANNER -M: Oliver Neukum +M: Oliver Neukum S: Maintained F: drivers/usb/image/microtek.* @@ -4552,7 +4820,7 @@ MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER W: http://popies.net/meye/ S: Orphan F: Documentation/video4linux/meye.txt -F: drivers/media/video/meye.* +F: drivers/media/pci/meye/ F: include/linux/meye.h MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER @@ -4616,6 +4884,16 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git S: Maintained F: drivers/usb/musb/ +MXL5007T MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/tuners/mxl5007t.* + MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE) M: Andrew Gallatin L: netdev@vger.kernel.org @@ -4788,6 +5066,7 @@ M: Lauro Ramos Venancio M: Aloisio Almeida Jr M: Samuel Ortiz L: linux-wireless@vger.kernel.org +L: linux-nfc@lists.01.org (moderated for non-subscribers) S: Maintained F: net/nfc/ F: include/linux/nfc.h @@ -4955,7 +5234,7 @@ OMAP IMAGE SIGNAL PROCESSOR (ISP) M: Laurent Pinchart L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/video/omap3isp/* +F: drivers/media/platform/omap3isp/ OMAP USB SUPPORT M: Felipe Balbi @@ -4996,7 +5275,7 @@ M: Jonathan Corbet L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/ov7670.c +F: drivers/media/i2c/ov7670.c ONENAND FLASH DRIVER M: Kyungmin Park @@ -5030,6 +5309,7 @@ S: Maintained F: Documentation/devicetree F: drivers/of F: include/linux/of*.h +F: scripts/dtc K: of_get_property K: of_match_table @@ -5215,7 +5495,7 @@ F: include/linux/i2c-algo-pca.h F: include/linux/i2c-pca-platform.h PCDP - PRIMARY CONSOLE AND DEBUG PORT -M: Khalid Aziz +M: Khalid Aziz S: Maintained F: drivers/firmware/pcdp.* @@ -5311,6 +5591,12 @@ L: linux-mtd@lists.infradead.org S: Maintained F: drivers/mtd/devices/phram.c +PICOLCD HID DRIVER +M: Bruno Prémont +L: linux-input@vger.kernel.org +S: Maintained +F: drivers/hid/hid-picolcd* + PICOXCELL SUPPORT M: Jamie Iles L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -5492,13 +5778,25 @@ L: cbe-oss-dev@lists.ozlabs.org S: Maintained F: drivers/block/ps3vram.c +PSTORE FILESYSTEM +M: Anton Vorontsov +M: Colin Cross +M: Kees Cook +M: Tony Luck +S: Maintained +T: git git://git.infradead.org/users/cbou/linux-pstore.git +F: fs/pstore/ +F: include/linux/pstore* +F: drivers/firmware/efivars.c +F: drivers/acpi/apei/erst.c + PTP HARDWARE CLOCK SUPPORT M: Richard Cochran S: Maintained W: http://linuxptp.sourceforge.net/ F: Documentation/ABI/testing/sysfs-ptp F: Documentation/ptp/* -F: drivers/net/gianfar_ptp.c +F: drivers/net/ethernet/freescale/gianfar_ptp.c F: drivers/net/phy/dp83640* F: drivers/ptp/* F: include/linux/ptp_cl* @@ -5521,7 +5819,7 @@ W: http://www.isely.net/pvrusb2/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained F: Documentation/video4linux/README.pvrusb2 -F: drivers/media/video/pvrusb2/ +F: drivers/media/usb/pvrusb2/ PWM SUBSYSTEM M: Thierry Reding @@ -5534,6 +5832,8 @@ F: Documentation/devicetree/bindings/pwm/ F: include/linux/pwm.h F: include/linux/of_pwm.h F: drivers/pwm/ +F: drivers/video/backlight/pwm_bl.c +F: include/linux/pwm_backlight.h PXA2xx/PXA3xx SUPPORT M: Eric Miao @@ -5629,6 +5929,16 @@ F: fs/qnx4/ F: include/linux/qnx4_fs.h F: include/linux/qnxtypes.h +QT1010 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/qt1010* + QUALCOMM HEXAGON ARCHITECTURE M: Richard Kuo L: linux-hexagon@vger.kernel.org @@ -5795,6 +6105,16 @@ F: include/linux/rose.h F: include/net/rose.h F: net/rose/ +RTL2830 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/rtl2830* + RTL8180 WIRELESS DRIVER M: "John W. Linville" L: linux-wireless@vger.kernel.org @@ -5889,9 +6209,9 @@ L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://www.mihu.de/linux/saa7146 S: Maintained -F: drivers/media/common/saa7146* -F: drivers/media/video/*7146* -F: include/media/*7146* +F: drivers/media/common/saa7146/ +F: drivers/media/pci/saa7146/ +F: include/media/saa7146* SAMSUNG LAPTOP DRIVER M: Corentin Chary @@ -5928,7 +6248,7 @@ S: Maintained F: drivers/tty/serial SYNOPSYS DESIGNWARE DMAC DRIVER -M: Viresh Kumar +M: Viresh Kumar S: Maintained F: include/linux/dw_dmac.h F: drivers/dma/dw_dmac_regs.h @@ -5952,7 +6272,7 @@ M: Huang Shijie M: Kang Yong M: Zhang Xiaobing S: Supported -F: drivers/media/video/tlg2300 +F: drivers/media/usb/tlg2300 SC1200 WDT DRIVER M: Zwane Mwaikambo @@ -6076,7 +6396,7 @@ S: Maintained F: drivers/mmc/host/sdhci-s3c.c SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER -M: Viresh Kumar +M: Viresh Kumar L: spear-devel@list.st.com L: linux-mmc@vger.kernel.org S: Maintained @@ -6340,8 +6660,9 @@ M: Guennadi Liakhovetski L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: include/media/v4l2* -F: drivers/media/video/v4l2* +F: include/media/soc* +F: drivers/media/i2c/soc_camera/ +F: drivers/media/platform/soc_camera/ SOEKRIS NET48XX LED SUPPORT M: Chris Boot @@ -6441,7 +6762,7 @@ S: Maintained F: include/linux/compiler.h SPEAR PLATFORM SUPPORT -M: Viresh Kumar +M: Viresh Kumar M: Shiraz Hashim L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -6450,7 +6771,7 @@ S: Maintained F: arch/arm/plat-spear/ SPEAR13XX MACHINE SUPPORT -M: Viresh Kumar +M: Viresh Kumar M: Shiraz Hashim L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -6459,7 +6780,7 @@ S: Maintained F: arch/arm/mach-spear13xx/ SPEAR3XX MACHINE SUPPORT -M: Viresh Kumar +M: Viresh Kumar M: Shiraz Hashim L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -6470,7 +6791,7 @@ F: arch/arm/mach-spear3xx/ SPEAR6XX MACHINE SUPPORT M: Rajeev Kumar M: Shiraz Hashim -M: Viresh Kumar +M: Viresh Kumar L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear @@ -6478,7 +6799,7 @@ S: Maintained F: arch/arm/mach-spear6xx/ SPEAR CLOCK FRAMEWORK SUPPORT -M: Viresh Kumar +M: Viresh Kumar L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear @@ -6718,6 +7039,14 @@ S: Maintained F: Documentation/svga.txt F: arch/x86/boot/video* +SWIOTLB SUBSYSTEM +M: Konrad Rzeszutek Wilk +L: linux-kernel@vger.kernel.org +S: Supported +F: lib/swiotlb.c +F: arch/*/kernel/pci-swiotlb.c +F: include/linux/swiotlb.h + SYSV FILESYSTEM M: Christoph Hellwig S: Maintained @@ -6759,6 +7088,66 @@ W: http://tcp-lp-mod.sourceforge.net/ S: Maintained F: net/ipv4/tcp_lp.c +TDA10071 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/tda10071* + +TDA18212 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/tda18212* + +TDA18218 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/tda18218* + +TDA18271 MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/tuners/tda18271* + +TDA827x MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/tuners/tda8290.* + +TDA8290 MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/tuners/tda8290.* + TEAM DRIVER M: Jiri Pirko L: netdev@vger.kernel.org @@ -6767,14 +7156,14 @@ F: drivers/net/team/ F: include/linux/if_team.h TEGRA SUPPORT -M: Colin Cross -M: Olof Johansson M: Stephen Warren L: linux-tegra@vger.kernel.org Q: http://patchwork.ozlabs.org/project/linux-tegra/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra.git S: Supported F: arch/arm/mach-tegra +F: arch/arm/boot/dts/tegra* +F: arch/arm/configs/tegra_defconfig TEHUTI ETHERNET DRIVER M: Andy Gospodarek @@ -6789,6 +7178,8 @@ F: drivers/char/tlclk.c TENSILICA XTENSA PORT (xtensa) M: Chris Zankel +M: Max Filippov +L: linux-xtensa@linux-xtensa.org S: Maintained F: arch/xtensa/ @@ -6949,6 +7340,16 @@ F: include/linux/serial_core.h F: include/linux/serial.h F: include/linux/tty.h +TUA9001 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/tua9001* + TULIP NETWORK DRIVERS M: Grant Grundler L: netdev@vger.kernel.org @@ -7066,8 +7467,14 @@ F: drivers/mtd/ubi/ F: include/linux/mtd/ubi.h F: include/mtd/ubi-user.h +UNSORTED BLOCK IMAGES (UBI) Fastmap +M: Richard Weinberger +L: linux-mtd@lists.infradead.org +S: Maintained +F: drivers/mtd/ubi/fastmap.c + USB ACM DRIVER -M: Oliver Neukum +M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: Documentation/usb/acm.txt @@ -7088,7 +7495,7 @@ S: Supported F: drivers/block/ub.c USB CDC ETHERNET DRIVER -M: Oliver Neukum +M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: drivers/net/usb/cdc_*.c @@ -7121,15 +7528,6 @@ S: Maintained F: Documentation/usb/ehci.txt F: drivers/usb/host/ehci* -USB ET61X[12]51 DRIVER -M: Luca Risolia -L: linux-usb@vger.kernel.org -L: linux-media@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git -W: http://www.linux-projects.org -S: Maintained -F: drivers/media/video/et61x251/ - USB GADGET/PERIPHERAL SUBSYSTEM M: Felipe Balbi L: linux-usb@vger.kernel.org @@ -7161,7 +7559,7 @@ F: drivers/usb/host/isp116x* F: include/linux/usb/isp116x.h USB KAWASAKI LSI DRIVER -M: Oliver Neukum +M: Oliver Neukum L: linux-usb@vger.kernel.org S: Maintained F: drivers/usb/serial/kl5kusb105.* @@ -7279,6 +7677,12 @@ W: http://www.connecttech.com S: Supported F: drivers/usb/serial/whiteheat* +USB SMSC75XX ETHERNET DRIVER +M: Steve Glendinning +L: netdev@vger.kernel.org +S: Maintained +F: drivers/net/usb/smsc75xx.* + USB SMSC95XX ETHERNET DRIVER M: Steve Glendinning L: netdev@vger.kernel.org @@ -7293,7 +7697,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://www.linux-projects.org S: Maintained F: Documentation/video4linux/sn9c102.txt -F: drivers/media/video/sn9c102/ +F: drivers/media/usb/sn9c102/ USB SUBSYSTEM M: Greg Kroah-Hartman @@ -7328,17 +7732,7 @@ L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://www.ideasonboard.org/uvc/ S: Maintained -F: drivers/media/video/uvc/ - -USB W996[87]CF DRIVER -M: Luca Risolia -L: linux-usb@vger.kernel.org -L: linux-media@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git -W: http://www.linux-projects.org -S: Maintained -F: Documentation/video4linux/w9968cf.txt -F: drivers/media/video/w996* +F: drivers/media/usb/uvc/ USB WIRELESS RNDIS DRIVER (rndis_wlan) M: Jussi Kivilinna @@ -7367,7 +7761,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://royale.zerezo.com/zr364xx/ S: Maintained F: Documentation/video4linux/zr364xx.txt -F: drivers/media/video/zr364xx.c +F: drivers/media/usb/zr364xx/ USER-MODE LINUX (UML) M: Jeff Dike @@ -7425,7 +7819,7 @@ M: Marek Szyprowski M: Kyungmin Park L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/video/videobuf2-* +F: drivers/media/v4l2-core/videobuf2-* F: include/media/videobuf2-* VIRTIO CONSOLE DRIVER @@ -7661,23 +8055,28 @@ S: Supported F: Documentation/hwmon/wm83?? F: arch/arm/mach-s3c64xx/mach-crag6410* F: drivers/clk/clk-wm83*.c +F: drivers/extcon/extcon-arizona.c F: drivers/leds/leds-wm83*.c F: drivers/gpio/gpio-*wm*.c +F: drivers/gpio/gpio-arizona.c F: drivers/hwmon/wm83??-hwmon.c F: drivers/input/misc/wm831x-on.c F: drivers/input/touchscreen/wm831x-ts.c F: drivers/input/touchscreen/wm97*.c -F: drivers/mfd/wm8*.c +F: drivers/mfd/arizona* +F: drivers/mfd/wm*.c F: drivers/power/wm83*.c F: drivers/rtc/rtc-wm83*.c F: drivers/regulator/wm8*.c F: drivers/video/backlight/wm83*_bl.c F: drivers/watchdog/wm83*_wdt.c +F: include/linux/mfd/arizona/ F: include/linux/mfd/wm831x/ F: include/linux/mfd/wm8350/ F: include/linux/mfd/wm8400* F: include/linux/wm97xx.h F: include/sound/wm????.h +F: sound/soc/codecs/arizona.? F: sound/soc/codecs/wm* WORKQUEUE @@ -7732,6 +8131,13 @@ F: drivers/xen/ F: arch/x86/include/asm/xen/ F: include/xen/ +XEN HYPERVISOR ARM +M: Stefano Stabellini +L: xen-devel@lists.xensource.com (moderated for non-subscribers) +S: Supported +F: arch/arm/xen/ +F: arch/arm/include/asm/xen/ + XEN NETWORK BACKEND DRIVER M: Ian Campbell L: xen-devel@lists.xensource.com (moderated for non-subscribers) @@ -7822,7 +8228,7 @@ L: linux-media@vger.kernel.org W: http://mjpeg.sourceforge.net/driver-zoran/ T: Mercurial http://linuxtv.org/hg/v4l-dvb S: Odd Fixes -F: drivers/media/video/zoran/ +F: drivers/media/pci/zoran/ ZS DECSTATION Z85C30 SERIAL DRIVER M: "Maciej W. Rozycki" diff --git a/Makefile b/Makefile index 9cc77acfc88166ee9ce2b59bf4101d654188f73b..86eb6acb3978c81121746356290ca1d7e82d0c4e 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 3 PATCHLEVEL = 6 SUBLEVEL = 0 -EXTRAVERSION = -rc2 -NAME = Saber-toothed Squirrel +EXTRAVERSION = +NAME = Terrified Chipmunk # *DOCUMENTATION* # To see a list of typical targets execute "make help" @@ -350,12 +350,22 @@ AFLAGS_KERNEL = CFLAGS_GCOV = -fprofile-arcs -ftest-coverage +# Use USERINCLUDE when you must reference the UAPI directories only. +USERINCLUDE := \ + -I$(srctree)/arch/$(hdr-arch)/include/uapi \ + -Iarch/$(hdr-arch)/include/generated/uapi \ + -I$(srctree)/include/uapi \ + -Iinclude/generated/uapi \ + -include $(srctree)/include/linux/kconfig.h + # Use LINUXINCLUDE when you must reference the include/ directory. # Needed to be compatible with the O= option -LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include \ - -Iarch/$(hdr-arch)/include/generated -Iinclude \ - $(if $(KBUILD_SRC), -I$(srctree)/include) \ - -include $(srctree)/include/linux/kconfig.h +LINUXINCLUDE := \ + -I$(srctree)/arch/$(hdr-arch)/include \ + -Iarch/$(hdr-arch)/include/generated \ + $(if $(KBUILD_SRC), -I$(srctree)/include) \ + -Iinclude \ + $(USERINCLUDE) KBUILD_CPPFLAGS := -D__KERNEL__ @@ -437,9 +447,11 @@ asm-generic: # Detect when mixed targets is specified, and make a second invocation # of make so .config is not included in this case either (for *config). +version_h := include/generated/uapi/linux/version.h + no-dot-config-targets := clean mrproper distclean \ cscope gtags TAGS tags help %docs check% coccicheck \ - include/linux/version.h headers_% archheaders archscripts \ + $(version_h) headers_% archheaders archscripts \ kernelversion %src-pkg config-targets := 0 @@ -609,7 +621,11 @@ KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) endif ifdef CONFIG_FUNCTION_TRACER -KBUILD_CFLAGS += -pg +ifdef CONFIG_HAVE_FENTRY +CC_USING_FENTRY := $(call cc-option, -mfentry -DCC_USING_FENTRY) +endif +KBUILD_CFLAGS += -pg $(CC_USING_FENTRY) +KBUILD_AFLAGS += $(CC_USING_FENTRY) ifdef CONFIG_DYNAMIC_FTRACE ifdef CONFIG_HAVE_C_RECORDMCOUNT BUILD_C_RECORDMCOUNT := y @@ -805,7 +821,7 @@ endif # prepare2 creates a makefile if using a separate output directory prepare2: prepare3 outputmakefile asm-generic -prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \ +prepare1: prepare2 $(version_h) include/generated/utsrelease.h \ include/config/auto.conf $(cmd_crmodverdir) @@ -838,7 +854,7 @@ define filechk_version.h echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) endef -include/linux/version.h: $(srctree)/Makefile FORCE +$(version_h): $(srctree)/Makefile FORCE $(call filechk,version.h) include/generated/utsrelease.h: include/config/kernel.release FORCE @@ -883,7 +899,7 @@ PHONY += archscripts archscripts: PHONY += __headers -__headers: include/linux/version.h scripts_basic asm-generic archheaders archscripts FORCE +__headers: $(version_h) scripts_basic asm-generic archheaders archscripts FORCE $(Q)$(MAKE) $(build)=scripts build_unifdef PHONY += headers_install_all @@ -892,10 +908,10 @@ headers_install_all: PHONY += headers_install headers_install: __headers - $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \ - $(error Headers not exportable for the $(SRCARCH) architecture)) - $(Q)$(MAKE) $(hdr-inst)=include - $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) + $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \ + $(error Headers not exportable for the $(SRCARCH) architecture)) + $(Q)$(MAKE) $(hdr-inst)=include/uapi + $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) PHONY += headers_check_all headers_check_all: headers_install_all @@ -903,8 +919,8 @@ headers_check_all: headers_install_all PHONY += headers_check headers_check: headers_install - $(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1 - $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1 + $(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1 + $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1 # --------------------------------------------------------------------------- # Modules @@ -993,8 +1009,7 @@ CLEAN_DIRS += $(MODVERDIR) # Directories & files removed with 'make mrproper' MRPROPER_DIRS += include/config usr/include include/generated \ arch/*/include/generated -MRPROPER_FILES += .config .config.old .version .old_version \ - include/linux/version.h \ +MRPROPER_FILES += .config .config.old .version .old_version $(version_h) \ Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS # clean - Delete most, but leave enough to build external modules diff --git a/README b/README index 9beaed0ed620b31495a89c79fd12f7f926f7d902..f32710a817fc392262f5f890cb637e5e0b1b5d1a 100644 --- a/README +++ b/README @@ -206,6 +206,24 @@ CONFIGURING the kernel: "make randconfig" Create a ./.config file by setting symbol values to random values. + "make localmodconfig" Create a config based on current config and + loaded modules (lsmod). Disables any module + option that is not needed for the loaded modules. + + To create a localmodconfig for another machine, + store the lsmod of that machine into a file + and pass it in as a LSMOD parameter. + + target$ lsmod > /tmp/mylsmod + target$ scp /tmp/mylsmod host:/tmp + + host$ make LSMOD=/tmp/mylsmod localmodconfig + + The above also works when cross compiling. + + "make localyesconfig" Similar to localmodconfig, except it will convert + all module options to built in (=y) options. + You can find more information on using the Linux kernel config tools in Documentation/kbuild/kconfig.txt. diff --git a/arch/Kconfig b/arch/Kconfig index 72f2fa189cc5200bb98143c6b35de8ffc9e0aaee..550cce4dd64840a2f0be048ffb046b6d4a2dafae 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -222,6 +222,19 @@ config HAVE_PERF_EVENTS_NMI subsystem. Also has support for calculating CPU cycle events to determine how many clock cycles in a given period. +config HAVE_PERF_REGS + bool + help + Support selective register dumps for perf events. This includes + bit-mapping of each registers and a unique architecture id. + +config HAVE_PERF_USER_STACK_DUMP + bool + help + Support user stack dumps for perf event samples. This needs + access to the user stack pointer which is not unified across + architectures. + config HAVE_ARCH_JUMP_LABEL bool @@ -281,4 +294,26 @@ config SECCOMP_FILTER See Documentation/prctl/seccomp_filter.txt for details. +config HAVE_RCU_USER_QS + bool + help + Provide kernel entry/exit hooks necessary for userspace + RCU extended quiescent state. Syscalls need to be wrapped inside + rcu_user_exit()-rcu_user_enter() through the slow path using + TIF_NOHZ flag. Exceptions handlers must be wrapped as well. Irqs + are already protected inside rcu_irq_enter/rcu_irq_exit() but + preemption or signal handling on irq exit still need to be protected. + +config HAVE_VIRT_CPU_ACCOUNTING + bool + +config HAVE_IRQ_TIME_ACCOUNTING + bool + help + Archs need to ensure they use a high enough resolution clock to + support irq time accounting and then call enable_sched_clock_irqtime(). + +config HAVE_ARCH_TRANSPARENT_HUGEPAGE + bool + source "kernel/gcov/Kconfig" diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index d5b9b5e645cc7ad6ee66984d78434b306bc1aa13..9944dedee5b1b1b31abf08599a44421333bd9290 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -18,6 +18,8 @@ config ALPHA select ARCH_HAVE_NMI_SAFE_CMPXCHG select GENERIC_SMP_IDLE_THREAD select GENERIC_CMOS_UPDATE + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild index e423defed91e30cb68bf51863fe105caffe7f016..d97d66334e6f87fa4d3024e9a98e0517ccadc8a1 100644 --- a/arch/alpha/include/asm/Kbuild +++ b/arch/alpha/include/asm/Kbuild @@ -1,5 +1,7 @@ include include/asm-generic/Kbuild.asm +generic-y += clkdev.h + header-y += compiler.h header-y += console.h header-y += fpu.h diff --git a/arch/alpha/include/asm/atomic.h b/arch/alpha/include/asm/atomic.h index 3bb7ffeae3bc610010bb54a3eaba698c513c0c7d..c2cbe4fc391cd7d77d319cb0cbeabd19f7e5ecbb 100644 --- a/arch/alpha/include/asm/atomic.h +++ b/arch/alpha/include/asm/atomic.h @@ -14,8 +14,8 @@ */ -#define ATOMIC_INIT(i) ( (atomic_t) { (i) } ) -#define ATOMIC64_INIT(i) ( (atomic64_t) { (i) } ) +#define ATOMIC_INIT(i) { (i) } +#define ATOMIC64_INIT(i) { (i) } #define atomic_read(v) (*(volatile int *)&(v)->counter) #define atomic64_read(v) (*(volatile long *)&(v)->counter) diff --git a/arch/alpha/include/asm/fpu.h b/arch/alpha/include/asm/fpu.h index db00f7885faad8949db38886e5ebd798440f63f5..e477bcd5b94aaa3055486564c2ab2d54a5e44934 100644 --- a/arch/alpha/include/asm/fpu.h +++ b/arch/alpha/include/asm/fpu.h @@ -1,7 +1,9 @@ #ifndef __ASM_ALPHA_FPU_H #define __ASM_ALPHA_FPU_H +#ifdef __KERNEL__ #include +#endif /* * Alpha floating-point control register defines: diff --git a/arch/alpha/include/asm/ptrace.h b/arch/alpha/include/asm/ptrace.h index fd698a174f26a9358a2c8e63b663c68bc47a56c1..b87755a1955482f9a46282749ed68755afca4973 100644 --- a/arch/alpha/include/asm/ptrace.h +++ b/arch/alpha/include/asm/ptrace.h @@ -76,7 +76,10 @@ struct switch_stack { #define task_pt_regs(task) \ ((struct pt_regs *) (task_stack_page(task) + 2*PAGE_SIZE) - 1) -#define force_successful_syscall_return() (task_pt_regs(current)->r0 = 0) +#define current_pt_regs() \ + ((struct pt_regs *) ((char *)current_thread_info() + 2*PAGE_SIZE) - 1) + +#define force_successful_syscall_return() (current_pt_regs()->r0 = 0) #endif diff --git a/arch/alpha/include/asm/socket.h b/arch/alpha/include/asm/socket.h index dcb221a4b5be3505686b05fb3060307cde68f29b..7d2f75be932e6d16e4ceba058fe0e0c769a8be32 100644 --- a/arch/alpha/include/asm/socket.h +++ b/arch/alpha/include/asm/socket.h @@ -76,9 +76,11 @@ /* Instruct lower device to use last 4-bytes of skb data as FCS */ #define SO_NOFCS 43 +#ifdef __KERNEL__ /* O_NONBLOCK clashes with the bits used for socket types. Therefore we * have to define SOCK_NONBLOCK to a different value here. */ #define SOCK_NONBLOCK 0x40000000 +#endif /* __KERNEL__ */ #endif /* _ASM_SOCKET_H */ diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h index b49ec2f8d6e3e0220e4009793387c917f1b8e090..766fdfde2b7aa0329cc42681f2fb907b08ce9064 100644 --- a/arch/alpha/include/asm/uaccess.h +++ b/arch/alpha/include/asm/uaccess.h @@ -433,36 +433,12 @@ clear_user(void __user *to, long len) #undef __module_address #undef __module_call -/* Returns: -EFAULT if exception before terminator, N if the entire - buffer filled, else strlen. */ +#define user_addr_max() \ + (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL) -extern long __strncpy_from_user(char *__to, const char __user *__from, long __to_len); - -extern inline long -strncpy_from_user(char *to, const char __user *from, long n) -{ - long ret = -EFAULT; - if (__access_ok((unsigned long)from, 0, get_fs())) - ret = __strncpy_from_user(to, from, n); - return ret; -} - -/* Returns: 0 if bad, string length+1 (memory size) of string if ok */ -extern long __strlen_user(const char __user *); - -extern inline long strlen_user(const char __user *str) -{ - return access_ok(VERIFY_READ,str,0) ? __strlen_user(str) : 0; -} - -/* Returns: 0 if exception before NUL or reaching the supplied limit (N), - * a value greater than N if the limit would be exceeded, else strlen. */ -extern long __strnlen_user(const char __user *, long); - -extern inline long strnlen_user(const char __user *str, long n) -{ - return access_ok(VERIFY_READ,str,0) ? __strnlen_user(str, n) : 0; -} +extern long strncpy_from_user(char *dest, const char __user *src, long count); +extern __must_check long strlen_user(const char __user *str); +extern __must_check long strnlen_user(const char __user *str, long n); /* * About the exception table: diff --git a/arch/alpha/include/asm/unistd.h b/arch/alpha/include/asm/unistd.h index 633b23b0664ab2a4a075d648d26547dbc911a65d..a31a78eac9b99962cf6b55df76b1066cdcaf7b2b 100644 --- a/arch/alpha/include/asm/unistd.h +++ b/arch/alpha/include/asm/unistd.h @@ -465,10 +465,12 @@ #define __NR_setns 501 #define __NR_accept4 502 #define __NR_sendmmsg 503 +#define __NR_process_vm_readv 504 +#define __NR_process_vm_writev 505 #ifdef __KERNEL__ -#define NR_SYSCALLS 504 +#define NR_SYSCALLS 506 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_STAT64 diff --git a/arch/alpha/include/asm/word-at-a-time.h b/arch/alpha/include/asm/word-at-a-time.h new file mode 100644 index 0000000000000000000000000000000000000000..6b340d0f1521c3ad9c4edf984abe60982ae24c04 --- /dev/null +++ b/arch/alpha/include/asm/word-at-a-time.h @@ -0,0 +1,55 @@ +#ifndef _ASM_WORD_AT_A_TIME_H +#define _ASM_WORD_AT_A_TIME_H + +#include + +/* + * word-at-a-time interface for Alpha. + */ + +/* + * We do not use the word_at_a_time struct on Alpha, but it needs to be + * implemented to humour the generic code. + */ +struct word_at_a_time { + const unsigned long unused; +}; + +#define WORD_AT_A_TIME_CONSTANTS { 0 } + +/* Return nonzero if val has a zero */ +static inline unsigned long has_zero(unsigned long val, unsigned long *bits, const struct word_at_a_time *c) +{ + unsigned long zero_locations = __kernel_cmpbge(0, val); + *bits = zero_locations; + return zero_locations; +} + +static inline unsigned long prep_zero_mask(unsigned long val, unsigned long bits, const struct word_at_a_time *c) +{ + return bits; +} + +#define create_zero_mask(bits) (bits) + +static inline unsigned long find_zero(unsigned long bits) +{ +#if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67) + /* Simple if have CIX instructions */ + return __kernel_cttz(bits); +#else + unsigned long t1, t2, t3; + /* Retain lowest set bit only */ + bits &= -bits; + /* Binary search for lowest set bit */ + t1 = bits & 0xf0; + t2 = bits & 0xcc; + t3 = bits & 0xaa; + if (t1) t1 = 4; + if (t2) t2 = 2; + if (t3) t3 = 1; + return t1 + t2 + t3; +#endif +} + +#endif /* _ASM_WORD_AT_A_TIME_H */ diff --git a/arch/alpha/include/uapi/asm/Kbuild b/arch/alpha/include/uapi/asm/Kbuild new file mode 100644 index 0000000000000000000000000000000000000000..baebb3da1d44160fc6f6f259886656e6f494b167 --- /dev/null +++ b/arch/alpha/include/uapi/asm/Kbuild @@ -0,0 +1,3 @@ +# UAPI Header export list +include include/uapi/asm-generic/Kbuild.asm + diff --git a/arch/alpha/kernel/alpha_ksyms.c b/arch/alpha/kernel/alpha_ksyms.c index d96e742d4dc2c9d139e021ee34aae81eeabdda55..15fa821d09cd38ff58ea5390439617ee2ff4a2eb 100644 --- a/arch/alpha/kernel/alpha_ksyms.c +++ b/arch/alpha/kernel/alpha_ksyms.c @@ -52,7 +52,6 @@ EXPORT_SYMBOL(alpha_write_fp_reg_s); /* entry.S */ EXPORT_SYMBOL(kernel_thread); -EXPORT_SYMBOL(kernel_execve); /* Networking helper routines. */ EXPORT_SYMBOL(csum_tcpudp_magic); @@ -74,8 +73,6 @@ EXPORT_SYMBOL(alpha_fp_emul); */ EXPORT_SYMBOL(__copy_user); EXPORT_SYMBOL(__do_clear_user); -EXPORT_SYMBOL(__strncpy_from_user); -EXPORT_SYMBOL(__strnlen_user); /* * SMP-specific symbols. diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S index 6d159cee5f2f43a48bc9aac8355069a3e588ef7f..ec0da0567ab515e6203d2310a9d960be7d4fc0e7 100644 --- a/arch/alpha/kernel/entry.S +++ b/arch/alpha/kernel/entry.S @@ -663,58 +663,6 @@ kernel_thread: br ret_to_kernel .end kernel_thread -/* - * kernel_execve(path, argv, envp) - */ - .align 4 - .globl kernel_execve - .ent kernel_execve -kernel_execve: - /* We can be called from a module. */ - ldgp $gp, 0($27) - lda $sp, -(32+SIZEOF_PT_REGS+8)($sp) - .frame $sp, 32+SIZEOF_PT_REGS+8, $26, 0 - stq $26, 0($sp) - stq $16, 8($sp) - stq $17, 16($sp) - stq $18, 24($sp) - .prologue 1 - - lda $16, 32($sp) - lda $17, 0 - lda $18, SIZEOF_PT_REGS - bsr $26, memset !samegp - - /* Avoid the HAE being gratuitously wrong, which would cause us - to do the whole turn off interrupts thing and restore it. */ - ldq $2, alpha_mv+HAE_CACHE - stq $2, 152+32($sp) - - ldq $16, 8($sp) - ldq $17, 16($sp) - ldq $18, 24($sp) - lda $19, 32($sp) - bsr $26, do_execve !samegp - - ldq $26, 0($sp) - bne $0, 1f /* error! */ - - /* Move the temporary pt_regs struct from its current location - to the top of the kernel stack frame. See copy_thread for - details for a normal process. */ - lda $16, 0x4000 - SIZEOF_PT_REGS($8) - lda $17, 32($sp) - lda $18, SIZEOF_PT_REGS - bsr $26, memmove !samegp - - /* Take that over as our new stack frame and visit userland! */ - lda $sp, 0x4000 - SIZEOF_PT_REGS($8) - br $31, ret_from_sys_call - -1: lda $sp, 32+SIZEOF_PT_REGS+8($sp) - ret -.end kernel_execve - /* * Special system calls. Most of these are special in that they either @@ -796,115 +744,6 @@ sys_rt_sigreturn: br ret_from_sys_call .end sys_rt_sigreturn - .align 4 - .globl sys_sethae - .ent sys_sethae -sys_sethae: - .prologue 0 - stq $16, 152($sp) - ret -.end sys_sethae - - .align 4 - .globl osf_getpriority - .ent osf_getpriority -osf_getpriority: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - jsr $26, sys_getpriority - - ldq $26, 0($sp) - blt $0, 1f - - /* Return value is the unbiased priority, i.e. 20 - prio. - This does result in negative return values, so signal - no error by writing into the R0 slot. */ - lda $1, 20 - stq $31, 16($sp) - subl $1, $0, $0 - unop - -1: lda $sp, 16($sp) - ret -.end osf_getpriority - - .align 4 - .globl sys_getxuid - .ent sys_getxuid -sys_getxuid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_UID($3) - ldl $1, CRED_EUID($3) - stq $1, 80($sp) - ret -.end sys_getxuid - - .align 4 - .globl sys_getxgid - .ent sys_getxgid -sys_getxgid: - .prologue 0 - ldq $2, TI_TASK($8) - ldq $3, TASK_CRED($2) - ldl $0, CRED_GID($3) - ldl $1, CRED_EGID($3) - stq $1, 80($sp) - ret -.end sys_getxgid - - .align 4 - .globl sys_getxpid - .ent sys_getxpid -sys_getxpid: - .prologue 0 - ldq $2, TI_TASK($8) - - /* See linux/kernel/timer.c sys_getppid for discussion - about this loop. */ - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - ldl $0, TASK_TGID($2) -1: ldl $1, TASK_TGID($4) -#ifdef CONFIG_SMP - mov $4, $5 - mb - ldq $3, TASK_GROUP_LEADER($2) - ldq $4, TASK_REAL_PARENT($3) - cmpeq $4, $5, $5 - beq $5, 1b -#endif - stq $1, 80($sp) - ret -.end sys_getxpid - - .align 4 - .globl sys_alpha_pipe - .ent sys_alpha_pipe -sys_alpha_pipe: - lda $sp, -16($sp) - stq $26, 0($sp) - .prologue 0 - - mov $31, $17 - lda $16, 8($sp) - jsr $26, do_pipe_flags - - ldq $26, 0($sp) - bne $0, 1f - - /* The return values are in $0 and $20. */ - ldl $1, 12($sp) - ldl $0, 8($sp) - - stq $1, 80+16($sp) -1: lda $sp, 16($sp) - ret -.end sys_alpha_pipe - .align 4 .globl sys_execve .ent sys_execve diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 98a103621af6c24e04c219b318281d412ce5018d..63e77e3944ced280724c964b7690502341383695 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -145,27 +145,24 @@ SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd, long __user *, basep) { int error; - struct file *file; + struct fd arg = fdget(fd); struct osf_dirent_callback buf; - error = -EBADF; - file = fget(fd); - if (!file) - goto out; + if (!arg.file) + return -EBADF; buf.dirent = dirent; buf.basep = basep; buf.count = count; buf.error = 0; - error = vfs_readdir(file, osf_filldir, &buf); + error = vfs_readdir(arg.file, osf_filldir, &buf); if (error >= 0) error = buf.error; if (count != buf.count) error = count - buf.count; - fput(file); - out: + fdput(arg); return error; } @@ -278,8 +275,8 @@ linux_to_osf_stat(struct kstat *lstat, struct osf_stat __user *osf_stat) tmp.st_dev = lstat->dev; tmp.st_mode = lstat->mode; tmp.st_nlink = lstat->nlink; - tmp.st_uid = lstat->uid; - tmp.st_gid = lstat->gid; + tmp.st_uid = from_kuid_munged(current_user_ns(), lstat->uid); + tmp.st_gid = from_kgid_munged(current_user_ns(), lstat->gid); tmp.st_rdev = lstat->rdev; tmp.st_ldev = lstat->rdev; tmp.st_size = lstat->size; @@ -1404,3 +1401,52 @@ SYSCALL_DEFINE3(osf_writev, unsigned long, fd, } #endif + +SYSCALL_DEFINE2(osf_getpriority, int, which, int, who) +{ + int prio = sys_getpriority(which, who); + if (prio >= 0) { + /* Return value is the unbiased priority, i.e. 20 - prio. + This does result in negative return values, so signal + no error */ + force_successful_syscall_return(); + prio = 20 - prio; + } + return prio; +} + +SYSCALL_DEFINE0(getxuid) +{ + current_pt_regs()->r20 = sys_geteuid(); + return sys_getuid(); +} + +SYSCALL_DEFINE0(getxgid) +{ + current_pt_regs()->r20 = sys_getegid(); + return sys_getgid(); +} + +SYSCALL_DEFINE0(getxpid) +{ + current_pt_regs()->r20 = sys_getppid(); + return sys_getpid(); +} + +SYSCALL_DEFINE0(alpha_pipe) +{ + int fd[2]; + int res = do_pipe_flags(fd, 0); + if (!res) { + /* The return values are in $0 and $20. */ + current_pt_regs()->r20 = fd[1]; + res = fd[0]; + } + return res; +} + +SYSCALL_DEFINE1(sethae, unsigned long, val) +{ + current_pt_regs()->hae = val; + return 0; +} diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c index 53649c7d0068f19e4b66b7cf8a6012ad5519f7b3..b51f7b4818cd07117308d645abfae4a91eeb0aa3 100644 --- a/arch/alpha/kernel/pci-sysfs.c +++ b/arch/alpha/kernel/pci-sysfs.c @@ -26,7 +26,7 @@ static int hose_mmap_page_range(struct pci_controller *hose, base = sparse ? hose->sparse_io_base : hose->dense_io_base; vma->vm_pgoff += base >> PAGE_SHIFT; - vma->vm_flags |= (VM_IO | VM_RESERVED); + vma->vm_flags |= VM_IO | VM_DONTEXPAND | VM_DONTDUMP; return io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, vma->vm_end - vma->vm_start, diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index 9816d5a4d176ff938561f88eae5119145a830bf3..ef757147cbf9ae2e63c74c44a7c01d9528db9e10 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -256,12 +256,6 @@ pcibios_fixup_bus(struct pci_bus *bus) } } -void __init -pcibios_update_irq(struct pci_dev *dev, int irq) -{ - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); -} - int pcibios_enable_device(struct pci_dev *dev, int mask) { diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 153d3fce3e8e9b4adc84c64fe63483d815a1ec59..83638aa096d562d803a8ffb3632dbb971db6da3d 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -54,9 +55,12 @@ cpu_idle(void) /* FIXME -- EV6 and LCA45 know how to power down the CPU. */ + rcu_idle_enter(); while (!need_resched()) cpu_relax(); - schedule(); + + rcu_idle_exit(); + schedule_preempt_disabled(); } } @@ -455,3 +459,22 @@ get_wchan(struct task_struct *p) } return pc; } + +int kernel_execve(const char *path, const char *const argv[], const char *const envp[]) +{ + /* Avoid the HAE being gratuitously wrong, which would cause us + to do the whole turn off interrupts thing and restore it. */ + struct pt_regs regs = {.hae = alpha_mv.hae_cache}; + int err = do_execve(path, argv, envp, ®s); + if (!err) { + struct pt_regs *p = current_pt_regs(); + /* copy regs to normal position and off to userland we go... */ + *p = regs; + __asm__ __volatile__ ( + "mov %0, $sp;" + "br $31, ret_from_sys_call" + : : "r"(p)); + } + return err; +} +EXPORT_SYMBOL(kernel_execve); diff --git a/arch/alpha/kernel/smp.c b/arch/alpha/kernel/smp.c index 35ddc02bfa4a46312359d456e36c365816ecf2a3..a41ad90a97a692b039a2e8dbee2f57aa4b1a3300 100644 --- a/arch/alpha/kernel/smp.c +++ b/arch/alpha/kernel/smp.c @@ -166,6 +166,7 @@ smp_callin(void) DBGS(("smp_callin: commencing CPU %d current %p active_mm %p\n", cpuid, current, current->active_mm)); + preempt_disable(); /* Do nothing. */ cpu_idle(); } diff --git a/arch/alpha/kernel/srmcons.c b/arch/alpha/kernel/srmcons.c index 3ea809430eda0f3ea018df2b540a75614846ce05..5d5865204a1d4739b0836bed605b5220192ad1b7 100644 --- a/arch/alpha/kernel/srmcons.c +++ b/arch/alpha/kernel/srmcons.c @@ -223,6 +223,7 @@ srmcons_init(void) driver->subtype = SYSTEM_TYPE_SYSCONS; driver->init_termios = tty_std_termios; tty_set_operations(driver, &srmcons_ops); + tty_port_link_device(&srmcons_singleton.port, driver, 0); err = tty_register_driver(driver); if (err) { put_tty_driver(driver); diff --git a/arch/alpha/kernel/systbls.S b/arch/alpha/kernel/systbls.S index 87835235f114bd3d6619c8985833046b368eea96..2ac6b45c3e0005d542a084bfabcc652b4747f75e 100644 --- a/arch/alpha/kernel/systbls.S +++ b/arch/alpha/kernel/systbls.S @@ -111,7 +111,7 @@ sys_call_table: .quad sys_socket .quad sys_connect .quad sys_accept - .quad osf_getpriority /* 100 */ + .quad sys_osf_getpriority /* 100 */ .quad sys_send .quad sys_recv .quad sys_sigreturn @@ -522,6 +522,8 @@ sys_call_table: .quad sys_setns .quad sys_accept4 .quad sys_sendmmsg + .quad sys_process_vm_readv + .quad sys_process_vm_writev /* 505 */ .size sys_call_table, . - sys_call_table .type sys_call_table, @object diff --git a/arch/alpha/lib/Makefile b/arch/alpha/lib/Makefile index c0a83ab62b785f332d817b9f5b0036545295b640..59660743237cc489b4e4eef405e92ab66f7b25e8 100644 --- a/arch/alpha/lib/Makefile +++ b/arch/alpha/lib/Makefile @@ -31,8 +31,6 @@ lib-y = __divqu.o __remqu.o __divlu.o __remlu.o \ $(ev6-y)memchr.o \ $(ev6-y)copy_user.o \ $(ev6-y)clear_user.o \ - $(ev6-y)strncpy_from_user.o \ - $(ev67-y)strlen_user.o \ $(ev6-y)csum_ipv6_magic.o \ $(ev6-y)clear_page.o \ $(ev6-y)copy_page.o \ diff --git a/arch/alpha/lib/ev6-strncpy_from_user.S b/arch/alpha/lib/ev6-strncpy_from_user.S deleted file mode 100644 index d2e28178caccc8b59fb2aea43b88e2934e54a7db..0000000000000000000000000000000000000000 --- a/arch/alpha/lib/ev6-strncpy_from_user.S +++ /dev/null @@ -1,424 +0,0 @@ -/* - * arch/alpha/lib/ev6-strncpy_from_user.S - * 21264 version contributed by Rick Gorton - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * A bunch of instructions got moved and temp registers were changed - * to aid in scheduling. Control flow was also re-arranged to eliminate - * branches, and to provide longer code sequences to enable better scheduling. - * A total rewrite (using byte load/stores for start & tail sequences) - * is desirable, but very difficult to do without a from-scratch rewrite. - * Save that for the future. - */ - - -#include -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 4 -__strncpy_from_user: - and a0, 7, t3 # E : find dest misalignment - beq a2, $zerolength # U : - - /* Are source and destination co-aligned? */ - mov a0, v0 # E : save the string start - xor a0, a1, t4 # E : - EX( ldq_u t1, 0(a1) ) # L : Latency=3 load first quadword - ldq_u t0, 0(a0) # L : load first (partial) aligned dest quadword - - addq a2, t3, a2 # E : bias count by dest misalignment - subq a2, 1, a3 # E : - addq zero, 1, t10 # E : - and t4, 7, t4 # E : misalignment between the two - - and a3, 7, t6 # E : number of tail bytes - sll t10, t6, t10 # E : t10 = bitmask of last count byte - bne t4, $unaligned # U : - lda t2, -1 # E : build a mask against false zero - - /* - * We are co-aligned; take care of a partial first word. - * On entry to this basic block: - * t0 == the first destination word for masking back in - * t1 == the first source word. - */ - - srl a3, 3, a2 # E : a2 = loop counter = (count - 1)/8 - addq a1, 8, a1 # E : - mskqh t2, a1, t2 # U : detection in the src word - nop - - /* Create the 1st output word and detect 0's in the 1st input word. */ - mskqh t1, a1, t3 # U : - mskql t0, a1, t0 # U : assemble the first output word - ornot t1, t2, t2 # E : - nop - - cmpbge zero, t2, t8 # E : bits set iff null found - or t0, t3, t0 # E : - beq a2, $a_eoc # U : - bne t8, $a_eos # U : 2nd branch in a quad. Bad. - - /* On entry to this basic block: - * t0 == a source quad not containing a null. - * a0 - current aligned destination address - * a1 - current aligned source address - * a2 - count of quadwords to move. - * NOTE: Loop improvement - unrolling this is going to be - * a huge win, since we're going to stall otherwise. - * Fix this later. For _really_ large copies, look - * at using wh64 on a look-ahead basis. See the code - * in clear_user.S and copy_user.S. - * Presumably, since (a0) and (a1) do not overlap (by C definition) - * Lots of nops here: - * - Separate loads from stores - * - Keep it to 1 branch/quadpack so the branch predictor - * can train. - */ -$a_loop: - stq_u t0, 0(a0) # L : - addq a0, 8, a0 # E : - nop - subq a2, 1, a2 # E : - - EX( ldq_u t0, 0(a1) ) # L : - addq a1, 8, a1 # E : - cmpbge zero, t0, t8 # E : Stall 2 cycles on t0 - beq a2, $a_eoc # U : - - beq t8, $a_loop # U : - nop - nop - nop - - /* Take care of the final (partial) word store. At this point - * the end-of-count bit is set in t8 iff it applies. - * - * On entry to this basic block we have: - * t0 == the source word containing the null - * t8 == the cmpbge mask that found it. - */ -$a_eos: - negq t8, t12 # E : find low bit set - and t8, t12, t12 # E : - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t12, t6, t8 # E : - zapnot t0, t8, t0 # U : clear src bytes > null - zap t1, t8, t1 # U : clear dst bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # L : - br $finish_up # L0 : - nop - nop - - /* Add the end-of-count bit to the eos detection bitmask. */ - .align 4 -$a_eoc: - or t10, t8, t8 - br $a_eos - nop - nop - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 4 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # L : load second src word - addq a1, 8, a1 # E : - mskql t0, a0, t0 # U : mask trailing garbage in dst - extqh t2, a1, t4 # U : - - or t1, t4, t1 # E : first aligned src word complete - mskqh t1, a0, t1 # U : mask leading garbage in src - or t0, t1, t0 # E : first output word complete - or t0, t6, t6 # E : mask original data for zero test - - cmpbge zero, t6, t8 # E : - beq a2, $u_eocfin # U : - bne t8, $u_final # U : bad news - 2nd branch in a quad - lda t6, -1 # E : mask out the bits we have - - mskql t6, a1, t6 # U : already seen - stq_u t0, 0(a0) # L : store first output word - or t6, t2, t2 # E : - cmpbge zero, t2, t8 # E : find nulls in second partial - - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - bne t8, $u_late_head_exit # U : - nop - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # U : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # L : read next high-order source word - addq a1, 8, a1 # E : - cmpbge zero, t2, t8 # E : - - beq a2, $u_eoc # U : - bne t8, $u_eos # U : - nop - nop - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - /* - * Extra nops here: - * separate load quads from store quads - * only one branch/quad to permit predictor training - */ - - .align 4 -$u_loop: - extqh t2, a1, t0 # U : extract high bits for current word - addq a1, 8, a1 # E : - extql t2, a1, t3 # U : extract low bits for next time - addq a0, 8, a0 # E : - - or t0, t1, t0 # E : current dst word now complete - EX( ldq_u t2, 0(a1) ) # L : load high word for next time - subq a2, 1, a2 # E : - nop - - stq_u t0, -8(a0) # L : save the current word - mov t3, t1 # E : - cmpbge zero, t2, t8 # E : test new word for eos - beq a2, $u_eoc # U : - - beq t8, $u_loop # U : - nop - nop - nop - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ - .align 4 -$u_eos: - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : first (partial) source word complete - cmpbge zero, t0, t8 # E : is the null in this first bit? - nop - - bne t8, $u_final # U : - stq_u t0, 0(a0) # L : the null was in the high-order bits - addq a0, 8, a0 # E : - subq a2, 1, a2 # E : - - .align 4 -$u_late_head_exit: - extql t2, a1, t0 # U : - cmpbge zero, t0, t8 # E : - or t8, t10, t6 # E : - cmoveq a2, t6, t8 # E : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ - .align 4 -$u_final: - negq t8, t6 # E : isolate low bit set - and t6, t8, t12 # E : - ldq_u t1, 0(a0) # L : - subq t12, 1, t6 # E : - - or t6, t12, t8 # E : - zapnot t0, t8, t0 # U : kill source bytes > null - zap t1, t8, t1 # U : kill dest bytes <= null - or t0, t1, t0 # E : - - stq_u t0, 0(a0) # E : - br $finish_up # U : - nop - nop - - .align 4 -$u_eoc: # end-of-count - extqh t2, a1, t0 # U : - or t0, t1, t0 # E : - cmpbge zero, t0, t8 # E : - nop - - .align 4 -$u_eocfin: # end-of-count, final word - or t10, t8, t8 # E : - br $u_final # U : - nop - nop - - /* Unaligned copy entry point. */ - .align 4 -$unaligned: - - srl a3, 3, a2 # U : a2 = loop counter = (count - 1)/8 - and a0, 7, t4 # E : find dest misalignment - and a1, 7, t5 # E : find src misalignment - mov zero, t0 # E : - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t6 # E : - beq t4, 1f # U : - ldq_u t0, 0(a0) # L : - lda t6, -1 # E : - - mskql t6, a0, t6 # E : - nop - nop - nop - - .align 4 -1: - subq a1, t4, a1 # E : sub dest misalignment from src addr - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - cmplt t4, t5, t12 # E : - extql t1, a1, t1 # U : shift src into place - lda t2, -1 # E : for creating masks later - - beq t12, $u_head # U : - mskqh t2, t5, t2 # U : begin src byte validity mask - cmpbge zero, t1, t8 # E : is there a zero? - nop - - extql t2, a1, t2 # U : - or t8, t10, t5 # E : test for end-of-count too - cmpbge zero, t2, t3 # E : - cmoveq a2, t5, t8 # E : Latency=2, extra map slot - - nop # E : goes with cmov - andnot t8, t3, t8 # E : - beq t8, $u_head # U : - nop - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # L : - negq t8, t6 # E : build bitmask of bytes <= zero - mskqh t1, t4, t1 # U : - and t6, t8, t12 # E : - - subq t12, 1, t6 # E : - or t6, t12, t8 # E : - zapnot t2, t8, t2 # U : prepare source word; mirror changes - zapnot t1, t8, t1 # U : to source validity mask - - andnot t0, t2, t0 # E : zero place for source to reside - or t0, t1, t0 # E : and put it there - stq_u t0, 0(a0) # L : - nop - - .align 4 -$finish_up: - zapnot t0, t12, t4 # U : was last byte written null? - and t12, 0xf0, t3 # E : binary search for the address of the - cmovne t4, 1, t4 # E : Latency=2, extra map slot - nop # E : with cmovne - - and t12, 0xcc, t2 # E : last byte written - and t12, 0xaa, t1 # E : - cmovne t3, 4, t3 # E : Latency=2, extra map slot - nop # E : with cmovne - - bic a0, 7, t0 - cmovne t2, 2, t2 # E : Latency=2, extra map slot - nop # E : with cmovne - nop - - cmovne t1, 1, t1 # E : Latency=2, extra map slot - nop # E : with cmovne - addq t0, t3, t0 # E : - addq t1, t2, t1 # E : - - addq t0, t1, t0 # E : - addq t0, t4, t0 # add one if we filled the buffer - subq t0, v0, v0 # find string length - ret # L0 : - - .align 4 -$zerolength: - nop - nop - nop - clr v0 - -$exception: - nop - nop - nop - ret - - .end __strncpy_from_user diff --git a/arch/alpha/lib/ev67-strlen_user.S b/arch/alpha/lib/ev67-strlen_user.S deleted file mode 100644 index 57e0d77b81a6955a41f6cf3a16f6bd4537debd65..0000000000000000000000000000000000000000 --- a/arch/alpha/lib/ev67-strlen_user.S +++ /dev/null @@ -1,107 +0,0 @@ -/* - * arch/alpha/lib/ev67-strlen_user.S - * 21264 version contributed by Rick Gorton - * - * Return the length of the string including the NULL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - * - * Much of the information about 21264 scheduling/coding comes from: - * Compiler Writer's Guide for the Alpha 21264 - * abbreviated as 'CWG' in other comments here - * ftp.digital.com/pub/Digital/info/semiconductor/literature/dsc-library.html - * Scheduling notation: - * E - either cluster - * U - upper subcluster; U0 - subcluster U0; U1 - subcluster U1 - * L - lower subcluster; L0 - subcluster L0; L1 - subcluster L1 - * Try not to change the actual algorithm if possible for consistency. - */ - -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 4 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - nop - nop - nop - - .globl __strnlen_user - - .align 4 -__strnlen_user: - .prologue 0 - EX( ldq_u t0, 0(a0) ) # L : load first quadword (a0 may be misaligned) - lda t1, -1(zero) # E : - - insqh t1, a0, t1 # U : - andnot a0, 7, v0 # E : - or t1, t0, t0 # E : - subq a0, 1, a0 # E : get our +1 for the return - - cmpbge zero, t0, t1 # E : t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 # E : - subq a0, v0, t0 # E : - bne t1, $found # U : - - addq t2, t0, t2 # E : - addq a1, 1, a1 # E : - nop # E : - nop # E : - - .align 4 -$loop: ble t2, $limit # U : - EX( ldq t0, 8(v0) ) # L : - nop # E : - nop # E : - - cmpbge zero, t0, t1 # E : - subq t2, 8, t2 # E : - addq v0, 8, v0 # E : addr += 8 - beq t1, $loop # U : - -$found: cttz t1, t2 # U0 : - addq v0, t2, v0 # E : - subq v0, a0, v0 # E : - ret # L0 : - -$exception: - nop - nop - nop - ret - - .align 4 # currently redundant -$limit: - nop - nop - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strlen_user.S b/arch/alpha/lib/strlen_user.S deleted file mode 100644 index 508a18e96479a94768a8a6c1fe0f1ea80737a830..0000000000000000000000000000000000000000 --- a/arch/alpha/lib/strlen_user.S +++ /dev/null @@ -1,91 +0,0 @@ -/* - * arch/alpha/lib/strlen_user.S - * - * Return the length of the string including the NUL terminator - * (strlen+1) or zero if an error occurred. - * - * In places where it is critical to limit the processing time, - * and the data is not trusted, strnlen_user() should be used. - * It will return a value greater than its second argument if - * that limit would be exceeded. This implementation is allowed - * to access memory beyond the limit, but will not cross a page - * boundary when doing so. - */ - -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda v0, $exception-99b(zero); \ - .previous - - - .set noreorder - .set noat - .text - - .globl __strlen_user - .ent __strlen_user - .frame sp, 0, ra - - .align 3 -__strlen_user: - ldah a1, 32767(zero) # do not use plain strlen_user() for strings - # that might be almost 2 GB long; you should - # be using strnlen_user() instead - - .globl __strnlen_user - - .align 3 -__strnlen_user: - .prologue 0 - - EX( ldq_u t0, 0(a0) ) # load first quadword (a0 may be misaligned) - lda t1, -1(zero) - insqh t1, a0, t1 - andnot a0, 7, v0 - or t1, t0, t0 - subq a0, 1, a0 # get our +1 for the return - cmpbge zero, t0, t1 # t1 <- bitmask: bit i == 1 <==> i-th byte == 0 - subq a1, 7, t2 - subq a0, v0, t0 - bne t1, $found - - addq t2, t0, t2 - addq a1, 1, a1 - - .align 3 -$loop: ble t2, $limit - EX( ldq t0, 8(v0) ) - subq t2, 8, t2 - addq v0, 8, v0 # addr += 8 - cmpbge zero, t0, t1 - beq t1, $loop - -$found: negq t1, t2 # clear all but least set bit - and t1, t2, t1 - - and t1, 0xf0, t2 # binary search for that set bit - and t1, 0xcc, t3 - and t1, 0xaa, t4 - cmovne t2, 4, t2 - cmovne t3, 2, t3 - cmovne t4, 1, t4 - addq t2, t3, t2 - addq v0, t4, v0 - addq v0, t2, v0 - nop # dual issue next two on ev4 and ev5 - subq v0, a0, v0 -$exception: - ret - - .align 3 # currently redundant -$limit: - subq a1, t2, v0 - ret - - .end __strlen_user diff --git a/arch/alpha/lib/strncpy_from_user.S b/arch/alpha/lib/strncpy_from_user.S deleted file mode 100644 index 73ee21160ff7428f5da6192a971971f3cf60b82d..0000000000000000000000000000000000000000 --- a/arch/alpha/lib/strncpy_from_user.S +++ /dev/null @@ -1,339 +0,0 @@ -/* - * arch/alpha/lib/strncpy_from_user.S - * Contributed by Richard Henderson (rth@tamu.edu) - * - * Just like strncpy except in the return value: - * - * -EFAULT if an exception occurs before the terminator is copied. - * N if the buffer filled. - * - * Otherwise the length of the string is returned. - */ - - -#include -#include - - -/* Allow an exception for an insn; exit if we get one. */ -#define EX(x,y...) \ - 99: x,##y; \ - .section __ex_table,"a"; \ - .long 99b - .; \ - lda $31, $exception-99b($0); \ - .previous - - - .set noat - .set noreorder - .text - - .globl __strncpy_from_user - .ent __strncpy_from_user - .frame $30, 0, $26 - .prologue 0 - - .align 3 -$aligned: - /* On entry to this basic block: - t0 == the first destination word for masking back in - t1 == the first source word. */ - - /* Create the 1st output word and detect 0's in the 1st input word. */ - lda t2, -1 # e1 : build a mask against false zero - mskqh t2, a1, t2 # e0 : detection in the src word - mskqh t1, a1, t3 # e0 : - ornot t1, t2, t2 # .. e1 : - mskql t0, a1, t0 # e0 : assemble the first output word - cmpbge zero, t2, t8 # .. e1 : bits set iff null found - or t0, t3, t0 # e0 : - beq a2, $a_eoc # .. e1 : - bne t8, $a_eos # .. e1 : - - /* On entry to this basic block: - t0 == a source word not containing a null. */ - -$a_loop: - stq_u t0, 0(a0) # e0 : - addq a0, 8, a0 # .. e1 : - EX( ldq_u t0, 0(a1) ) # e0 : - addq a1, 8, a1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t0, t8 # .. e1 (stall) - beq a2, $a_eoc # e1 : - beq t8, $a_loop # e1 : - - /* Take care of the final (partial) word store. At this point - the end-of-count bit is set in t8 iff it applies. - - On entry to this basic block we have: - t0 == the source word containing the null - t8 == the cmpbge mask that found it. */ - -$a_eos: - negq t8, t12 # e0 : find low bit set - and t8, t12, t12 # e1 (stall) - - /* For the sake of the cache, don't read a destination word - if we're not going to need it. */ - and t12, 0x80, t6 # e0 : - bne t6, 1f # .. e1 (zdb) - - /* We're doing a partial word store and so need to combine - our source and original destination words. */ - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t12, t6, t8 # e0 : - unop # - zapnot t0, t8, t0 # e0 : clear src bytes > null - zap t1, t8, t1 # .. e1 : clear dst bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) - br $finish_up - - /* Add the end-of-count bit to the eos detection bitmask. */ -$a_eoc: - or t10, t8, t8 - br $a_eos - - /*** The Function Entry Point ***/ - .align 3 -__strncpy_from_user: - mov a0, v0 # save the string start - beq a2, $zerolength - - /* Are source and destination co-aligned? */ - xor a0, a1, t1 # e0 : - and a0, 7, t0 # .. e1 : find dest misalignment - and t1, 7, t1 # e0 : - addq a2, t0, a2 # .. e1 : bias count by dest misalignment - subq a2, 1, a2 # e0 : - and a2, 7, t2 # e1 : - srl a2, 3, a2 # e0 : a2 = loop counter = (count - 1)/8 - addq zero, 1, t10 # .. e1 : - sll t10, t2, t10 # e0 : t10 = bitmask of last count byte - bne t1, $unaligned # .. e1 : - - /* We are co-aligned; take care of a partial first word. */ - - EX( ldq_u t1, 0(a1) ) # e0 : load first src word - addq a1, 8, a1 # .. e1 : - - beq t0, $aligned # avoid loading dest word if not needed - ldq_u t0, 0(a0) # e0 : - br $aligned # .. e1 : - - -/* The source and destination are not co-aligned. Align the destination - and cope. We have to be very careful about not reading too much and - causing a SEGV. */ - - .align 3 -$u_head: - /* We know just enough now to be able to assemble the first - full source word. We can still find a zero at the end of it - that prevents us from outputting the whole thing. - - On entry to this basic block: - t0 == the first dest word, unmasked - t1 == the shifted low bits of the first source word - t6 == bytemask that is -1 in dest word bytes */ - - EX( ldq_u t2, 8(a1) ) # e0 : load second src word - addq a1, 8, a1 # .. e1 : - mskql t0, a0, t0 # e0 : mask trailing garbage in dst - extqh t2, a1, t4 # e0 : - or t1, t4, t1 # e1 : first aligned src word complete - mskqh t1, a0, t1 # e0 : mask leading garbage in src - or t0, t1, t0 # e0 : first output word complete - or t0, t6, t6 # e1 : mask original data for zero test - cmpbge zero, t6, t8 # e0 : - beq a2, $u_eocfin # .. e1 : - bne t8, $u_final # e1 : - - lda t6, -1 # e1 : mask out the bits we have - mskql t6, a1, t6 # e0 : already seen - stq_u t0, 0(a0) # e0 : store first output word - or t6, t2, t2 # .. e1 : - cmpbge zero, t2, t8 # e0 : find nulls in second partial - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e0 : - bne t8, $u_late_head_exit # .. e1 : - - /* Finally, we've got all the stupid leading edge cases taken care - of and we can set up to enter the main loop. */ - - extql t2, a1, t1 # e0 : position hi-bits of lo word - EX( ldq_u t2, 8(a1) ) # .. e1 : read next high-order source word - addq a1, 8, a1 # e0 : - cmpbge zero, t2, t8 # e1 (stall) - beq a2, $u_eoc # e1 : - bne t8, $u_eos # e1 : - - /* Unaligned copy main loop. In order to avoid reading too much, - the loop is structured to detect zeros in aligned source words. - This has, unfortunately, effectively pulled half of a loop - iteration out into the head and half into the tail, but it does - prevent nastiness from accumulating in the very thing we want - to run as fast as possible. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word - - We further know that t2 does not contain a null terminator. */ - - .align 3 -$u_loop: - extqh t2, a1, t0 # e0 : extract high bits for current word - addq a1, 8, a1 # .. e1 : - extql t2, a1, t3 # e0 : extract low bits for next time - addq a0, 8, a0 # .. e1 : - or t0, t1, t0 # e0 : current dst word now complete - EX( ldq_u t2, 0(a1) ) # .. e1 : load high word for next time - stq_u t0, -8(a0) # e0 : save the current word - mov t3, t1 # .. e1 : - subq a2, 1, a2 # e0 : - cmpbge zero, t2, t8 # .. e1 : test new word for eos - beq a2, $u_eoc # e1 : - beq t8, $u_loop # e1 : - - /* We've found a zero somewhere in the source word we just read. - If it resides in the lower half, we have one (probably partial) - word to write out, and if it resides in the upper half, we - have one full and one partial word left to write out. - - On entry to this basic block: - t1 == the shifted high-order bits from the previous source word - t2 == the unshifted current source word. */ -$u_eos: - extqh t2, a1, t0 # e0 : - or t0, t1, t0 # e1 : first (partial) source word complete - - cmpbge zero, t0, t8 # e0 : is the null in this first bit? - bne t8, $u_final # .. e1 (zdb) - - stq_u t0, 0(a0) # e0 : the null was in the high-order bits - addq a0, 8, a0 # .. e1 : - subq a2, 1, a2 # e1 : - -$u_late_head_exit: - extql t2, a1, t0 # .. e0 : - cmpbge zero, t0, t8 # e0 : - or t8, t10, t6 # e1 : - cmoveq a2, t6, t8 # e0 : - nop # .. e1 : - - /* Take care of a final (probably partial) result word. - On entry to this basic block: - t0 == assembled source word - t8 == cmpbge mask that found the null. */ -$u_final: - negq t8, t6 # e0 : isolate low bit set - and t6, t8, t12 # e1 : - - and t12, 0x80, t6 # e0 : avoid dest word load if we can - bne t6, 1f # .. e1 (zdb) - - ldq_u t1, 0(a0) # e0 : - subq t12, 1, t6 # .. e1 : - or t6, t12, t8 # e0 : - zapnot t0, t8, t0 # .. e1 : kill source bytes > null - zap t1, t8, t1 # e0 : kill dest bytes <= null - or t0, t1, t0 # e1 : - -1: stq_u t0, 0(a0) # e0 : - br $finish_up - -$u_eoc: # end-of-count - extqh t2, a1, t0 - or t0, t1, t0 - cmpbge zero, t0, t8 - -$u_eocfin: # end-of-count, final word - or t10, t8, t8 - br $u_final - - /* Unaligned copy entry point. */ - .align 3 -$unaligned: - - EX( ldq_u t1, 0(a1) ) # e0 : load first source word - - and a0, 7, t4 # .. e1 : find dest misalignment - and a1, 7, t5 # e0 : find src misalignment - - /* Conditionally load the first destination word and a bytemask - with 0xff indicating that the destination byte is sacrosanct. */ - - mov zero, t0 # .. e1 : - mov zero, t6 # e0 : - beq t4, 1f # .. e1 : - ldq_u t0, 0(a0) # e0 : - lda t6, -1 # .. e1 : - mskql t6, a0, t6 # e0 : -1: - subq a1, t4, a1 # .. e1 : sub dest misalignment from src addr - - /* If source misalignment is larger than dest misalignment, we need - extra startup checks to avoid SEGV. */ - - cmplt t4, t5, t12 # e1 : - extql t1, a1, t1 # .. e0 : shift src into place - lda t2, -1 # e0 : for creating masks later - beq t12, $u_head # e1 : - - mskqh t2, t5, t2 # e0 : begin src byte validity mask - cmpbge zero, t1, t8 # .. e1 : is there a zero? - extql t2, a1, t2 # e0 : - or t8, t10, t5 # .. e1 : test for end-of-count too - cmpbge zero, t2, t3 # e0 : - cmoveq a2, t5, t8 # .. e1 : - andnot t8, t3, t8 # e0 : - beq t8, $u_head # .. e1 (zdb) - - /* At this point we've found a zero in the first partial word of - the source. We need to isolate the valid source data and mask - it into the original destination data. (Incidentally, we know - that we'll need at least one byte of that original dest word.) */ - - ldq_u t0, 0(a0) # e0 : - negq t8, t6 # .. e1 : build bitmask of bytes <= zero - mskqh t1, t4, t1 # e0 : - and t6, t8, t12 # .. e1 : - subq t12, 1, t6 # e0 : - or t6, t12, t8 # e1 : - - zapnot t2, t8, t2 # e0 : prepare source word; mirror changes - zapnot t1, t8, t1 # .. e1 : to source validity mask - - andnot t0, t2, t0 # e0 : zero place for source to reside - or t0, t1, t0 # e1 : and put it there - stq_u t0, 0(a0) # e0 : - -$finish_up: - zapnot t0, t12, t4 # was last byte written null? - cmovne t4, 1, t4 - - and t12, 0xf0, t3 # binary search for the address of the - and t12, 0xcc, t2 # last byte written - and t12, 0xaa, t1 - bic a0, 7, t0 - cmovne t3, 4, t3 - cmovne t2, 2, t2 - cmovne t1, 1, t1 - addq t0, t3, t0 - addq t1, t2, t1 - addq t0, t1, t0 - addq t0, t4, t0 # add one if we filled the buffer - - subq t0, v0, v0 # find string length - ret - -$zerolength: - clr v0 -$exception: - ret - - .end __strncpy_from_user diff --git a/arch/alpha/mm/fault.c b/arch/alpha/mm/fault.c index 5eecab1a84efd3430deab218698ab3dab91c0e6a..0c4132dd3507a0b62b3c40c2fc6fd4065a325262 100644 --- a/arch/alpha/mm/fault.c +++ b/arch/alpha/mm/fault.c @@ -89,6 +89,8 @@ do_page_fault(unsigned long address, unsigned long mmcsr, const struct exception_table_entry *fixup; int fault, si_code = SEGV_MAPERR; siginfo_t info; + unsigned int flags = (FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE | + (cause > 0 ? FAULT_FLAG_WRITE : 0)); /* As of EV6, a load into $31/$f31 is a prefetch, and never faults (or is suppressed by the PALcode). Support that for older CPUs @@ -114,6 +116,7 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto vmalloc_fault; #endif +retry: down_read(&mm->mmap_sem); vma = find_vma(mm, address); if (!vma) @@ -144,8 +147,11 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* If for any reason at all we couldn't handle the fault, make sure we exit gracefully rather than endlessly redo the fault. */ - fault = handle_mm_fault(mm, vma, address, cause > 0 ? FAULT_FLAG_WRITE : 0); - up_read(&mm->mmap_sem); + fault = handle_mm_fault(mm, vma, address, flags); + + if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current)) + return; + if (unlikely(fault & VM_FAULT_ERROR)) { if (fault & VM_FAULT_OOM) goto out_of_memory; @@ -153,10 +159,26 @@ do_page_fault(unsigned long address, unsigned long mmcsr, goto do_sigbus; BUG(); } - if (fault & VM_FAULT_MAJOR) - current->maj_flt++; - else - current->min_flt++; + + if (flags & FAULT_FLAG_ALLOW_RETRY) { + if (fault & VM_FAULT_MAJOR) + current->maj_flt++; + else + current->min_flt++; + if (fault & VM_FAULT_RETRY) { + flags &= ~FAULT_FLAG_ALLOW_RETRY; + + /* No need to up_read(&mm->mmap_sem) as we would + * have already released it in __lock_page_or_retry + * in mm/filemap.c. + */ + + goto retry; + } + } + + up_read(&mm->mmap_sem); + return; /* Something tried to access memory that isn't in our memory map. @@ -186,12 +208,14 @@ do_page_fault(unsigned long address, unsigned long mmcsr, /* We ran out of memory, or some other thing happened to us that made us unable to handle the page fault gracefully. */ out_of_memory: + up_read(&mm->mmap_sem); if (!user_mode(regs)) goto no_context; pagefault_out_of_memory(); return; do_sigbus: + up_read(&mm->mmap_sem); /* Send a sigbus, regardless of whether we were in kernel or user mode. */ info.si_signo = SIGBUS; diff --git a/arch/alpha/oprofile/common.c b/arch/alpha/oprofile/common.c index a0a5d27aa2150e48c840cfcdae78f43f5bc8c4dd..b8ce18f485d3ecce23d9903138eeb930ab62cb4d 100644 --- a/arch/alpha/oprofile/common.c +++ b/arch/alpha/oprofile/common.c @@ -12,6 +12,7 @@ #include #include #include +#include #include "op_impl.h" diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index e91c7cdc6fe5c5ae370fa8be0f3a3c51a0b49beb..2867a7742306c3b9d3de7edbfd3d4f546e9c8cca 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -6,7 +6,7 @@ config ARM select HAVE_DMA_API_DEBUG select HAVE_IDE if PCI || ISA || PCMCIA select HAVE_DMA_ATTRS - select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7) + select HAVE_DMA_CONTIGUOUS if MMU select HAVE_MEMBLOCK select RTC_LIB select SYS_SUPPORTS_APM_EMULATION @@ -16,6 +16,7 @@ config ARM select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB select HAVE_ARCH_TRACEHOOK + select HAVE_SYSCALL_TRACEPOINTS select HAVE_KPROBES if !XIP_KERNEL select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) @@ -24,6 +25,7 @@ config ARM select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) select ARCH_BINFMT_ELF_RANDOMIZE_PIE select HAVE_GENERIC_DMA_COHERENT + select HAVE_DEBUG_KMEMLEAK select HAVE_KERNEL_GZIP select HAVE_KERNEL_LZO select HAVE_KERNEL_LZMA @@ -38,7 +40,7 @@ config ARM select HARDIRQS_SW_RESEND select GENERIC_IRQ_PROBE select GENERIC_IRQ_SHOW - select GENERIC_IRQ_PROBE + select HAVE_UID16 select ARCH_WANT_IPC_PARSE_VERSION select HARDIRQS_SW_RESEND select CPU_PM if (SUSPEND || CPU_IDLE) @@ -126,11 +128,6 @@ config TRACE_IRQFLAGS_SUPPORT bool default y -config GENERIC_LOCKBREAK - bool - default y - depends on SMP && PREEMPT - config RWSEM_GENERIC_SPINLOCK bool default y @@ -208,6 +205,13 @@ config ARM_PATCH_PHYS_VIRT this feature (eg, building a kernel for a single machine) and you need to shrink the kernel to the minimal size. +config NEED_MACH_GPIO_H + bool + help + Select this when mach/gpio.h is required to provide special + definitions for this platform. The need for mach/gpio.h should + be avoided when possible. + config NEED_MACH_IO_H bool help @@ -253,39 +257,29 @@ config MMU # choice prompt "ARM system type" - default ARCH_VERSATILE + default ARCH_MULTIPLATFORM -config ARCH_SOCFPGA - bool "Altera SOCFPGA family" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_AMBA - select ARM_GIC - select CACHE_L2X0 - select CLKDEV_LOOKUP +config ARCH_MULTIPLATFORM + bool "Allow multiple platforms to be selected" + select ARM_PATCH_PHYS_VIRT + select AUTO_ZRELADDR select COMMON_CLK - select CPU_V7 - select DW_APB_TIMER - select DW_APB_TIMER_OF - select GENERIC_CLOCKEVENTS - select GPIO_PL061 if GPIOLIB - select HAVE_ARM_SCU + select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF - help - This enables support for Altera SOCFPGA Cyclone V platform + depends on MMU config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARM_AMBA select ARCH_HAS_CPUFREQ select COMMON_CLK - select CLK_VERSATILE + select COMMON_CLK_VERSATILE select HAVE_TCM select ICST select GENERIC_CLOCKEVENTS select PLAT_VERSATILE select PLAT_VERSATILE_FPGA_IRQ - select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select SPARSE_IRQ select MULTI_IRQ_HANDLER @@ -295,13 +289,12 @@ config ARCH_INTEGRATOR config ARCH_REALVIEW bool "ARM Ltd. RealView family" select ARM_AMBA - select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV + select COMMON_CLK + select COMMON_CLK_VERSATILE select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE - select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB @@ -318,7 +311,6 @@ config ARCH_VERSATILE select ICST select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB - select NEED_MACH_IO_H if PCI select PLAT_VERSATILE select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD @@ -327,69 +319,41 @@ config ARCH_VERSATILE help This enables support for ARM Ltd Versatile board. -config ARCH_VEXPRESS - bool "ARM Ltd. Versatile Express family" - select ARCH_WANT_OPTIONAL_GPIOLIB - select ARM_AMBA - select ARM_TIMER_SP804 - select CLKDEV_LOOKUP - select COMMON_CLK - select GENERIC_CLOCKEVENTS - select HAVE_CLK - select HAVE_PATA_PLATFORM - select ICST - select NO_IOPORT - select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD - select REGULATOR_FIXED_VOLTAGE if REGULATOR - help - This enables support for the ARM Ltd Versatile Express boards. - config ARCH_AT91 bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB select HAVE_CLK select CLKDEV_LOOKUP select IRQ_DOMAIN + select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD help This enables support for systems based on Atmel AT91RM9200 and AT91SAM9* processors. -config ARCH_BCMRING - bool "Broadcom BCMRING" - depends on MMU - select CPU_V6 - select ARM_AMBA - select ARM_TIMER_SP804 - select CLKDEV_LOOKUP - select GENERIC_CLOCKEVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB - help - Support for Broadcom's BCMRing platform. - -config ARCH_HIGHBANK - bool "Calxeda Highbank-based" +config ARCH_BCM2835 + bool "Broadcom BCM2835 family" select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA - select ARM_GIC + select ARM_ERRATA_411920 select ARM_TIMER_SP804 - select CACHE_L2X0 select CLKDEV_LOOKUP select COMMON_CLK - select CPU_V7 + select CPU_V6 select GENERIC_CLOCKEVENTS - select HAVE_ARM_SCU - select HAVE_SMP + select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF help - Support for the Calxeda Highbank SoC based boards. + This enables support for the Broadcom BCM2835 SoC. This SoC is + use in the Raspberry Pi, and Roku 2 devices. config ARCH_CLPS711X bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" select CPU_ARM720T select ARCH_USES_GETTIMEOFFSET + select COMMON_CLK + select CLKDEV_LOOKUP select NEED_MACH_MEMORY_H help Support for Cirrus Logic 711x/721x/731x based boards. @@ -413,21 +377,19 @@ config ARCH_GEMINI help Support for the Cortina Systems Gemini family SoCs -config ARCH_PRIMA2 - bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" - select CPU_V7 +config ARCH_SIRF + bool "CSR SiRF" select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP + select COMMON_CLK select GENERIC_IRQ_CHIP select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_SIRF select USE_OF - select ZONE_DMA help - Support for CSR SiRFSoC ARM Cortex A9 Platform + Support for CSR SiRFprimaII/Marco/Polo platforms config ARCH_EBSA110 bool "EBSA-110" @@ -462,7 +424,7 @@ config ARCH_FOOTBRIDGE select FOOTBRIDGE select GENERIC_CLOCKEVENTS select HAVE_IDE - select NEED_MACH_IO_H + select NEED_MACH_IO_H if !MMU select NEED_MACH_MEMORY_H help Support for systems based on the DC21285 companion chip @@ -489,7 +451,9 @@ config ARCH_MXS select CLKSRC_MMIO select COMMON_CLK select HAVE_CLK_PREPARE + select MULTI_IRQ_HANDLER select PINCTRL + select SPARSE_IRQ select USE_OF help Support for Freescale MXS-based family of processors @@ -519,7 +483,6 @@ config ARCH_IOP13XX select PCI select ARCH_SUPPORTS_MSI select VMSPLIT_1G - select NEED_MACH_IO_H select NEED_MACH_MEMORY_H select NEED_RET_TO_USER help @@ -529,6 +492,7 @@ config ARCH_IOP32X bool "IOP32x-based" depends on MMU select CPU_XSCALE + select NEED_MACH_GPIO_H select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP @@ -542,6 +506,7 @@ config ARCH_IOP33X bool "IOP33x-based" depends on MMU select CPU_XSCALE + select NEED_MACH_GPIO_H select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP @@ -564,26 +529,14 @@ config ARCH_IXP4XX help Support for Intel's IXP4XX (XScale) family of processors. -config ARCH_MVEBU - bool "Marvell SOCs with Device Tree support" - select GENERIC_CLOCKEVENTS - select MULTI_IRQ_HANDLER - select SPARSE_IRQ - select CLKSRC_MMIO - select GENERIC_IRQ_CHIP - select IRQ_DOMAIN - select COMMON_CLK - help - Support for the Marvell SoC Family with device tree support - config ARCH_DOVE bool "Marvell Dove" select CPU_V7 - select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H - select PLAT_ORION + select MIGHT_HAVE_PCI + select PLAT_ORION_LEGACY + select USB_ARCH_HAS_EHCI help Support for the Marvell Dove SoC 88AP510 @@ -593,8 +546,7 @@ config ARCH_KIRKWOOD select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H - select PLAT_ORION + select PLAT_ORION_LEGACY help Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. @@ -620,8 +572,7 @@ config ARCH_MV78XX0 select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H - select PLAT_ORION + select PLAT_ORION_LEGACY help Support for the following Marvell MV78xx0 series SoCs: MV781x0, MV782x0. @@ -633,8 +584,7 @@ config ARCH_ORION5X select PCI select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS - select NEED_MACH_IO_H - select PLAT_ORION + select PLAT_ORION_LEGACY help Support for the following Marvell Orion 5x series SoCs: Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), @@ -651,6 +601,7 @@ config ARCH_MMP select PLAT_PXA select SPARSE_IRQ select GENERIC_ALLOCATOR + select NEED_MACH_GPIO_H help Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. @@ -658,8 +609,9 @@ config ARCH_KS8695 bool "Micrel/Kendin KS8695" select CPU_ARM922T select ARCH_REQUIRE_GPIOLIB - select ARCH_USES_GETTIMEOFFSET select NEED_MACH_MEMORY_H + select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. @@ -689,40 +641,13 @@ config ARCH_TEGRA select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 - select NEED_MACH_IO_H if PCI select ARCH_HAS_CPUFREQ select USE_OF + select COMMON_CLK help This enables support for NVIDIA Tegra based systems (Tegra APX, Tegra 6xx and Tegra 2 series). -config ARCH_PICOXCELL - bool "Picochip picoXcell" - select ARCH_REQUIRE_GPIOLIB - select ARM_PATCH_PHYS_VIRT - select ARM_VIC - select CPU_V6K - select DW_APB_TIMER - select DW_APB_TIMER_OF - select GENERIC_CLOCKEVENTS - select GENERIC_GPIO - select HAVE_TCM - select NO_IOPORT - select SPARSE_IRQ - select USE_OF - help - This enables support for systems based on the Picochip picoXcell - family of Femtocell devices. The picoxcell support requires device tree - for all boards. - -config ARCH_PNX4008 - bool "Philips Nexperia PNX4008 Mobile" - select CPU_ARM926T - select CLKDEV_LOOKUP - select ARCH_USES_GETTIMEOFFSET - help - This enables support for Philips PNX4008 mobile platform. - config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU @@ -739,6 +664,7 @@ config ARCH_PXA select MULTI_IRQ_HANDLER select ARM_CPU_SUSPEND if PM select HAVE_IDE + select NEED_MACH_GPIO_H help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. @@ -801,6 +727,7 @@ config ARCH_SA1100 select CLKDEV_LOOKUP select ARCH_REQUIRE_GPIOLIB select HAVE_IDE + select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H select SPARSE_IRQ help @@ -816,6 +743,7 @@ config ARCH_S3C24XX select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_GPIO_H select NEED_MACH_IO_H help Samsung S3C2410, S3C2412, S3C2413, S3C2416, S3C2440, S3C2442, S3C2443 @@ -843,6 +771,7 @@ config ARCH_S3C64XX select SAMSUNG_GPIOLIB_4BIT select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_GPIO_H help Samsung S3C64XX series based systems @@ -857,6 +786,7 @@ config ARCH_S5P64X0 select GENERIC_CLOCKEVENTS select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS + select NEED_MACH_GPIO_H help Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, SMDK6450. @@ -871,6 +801,7 @@ config ARCH_S5PC100 select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_GPIO_H help Samsung S5PC100 series based systems @@ -888,6 +819,7 @@ config ARCH_S5PV210 select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H help Samsung S5PV210/S5PC110 series based systems @@ -905,6 +837,7 @@ config ARCH_EXYNOS select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG + select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H help Support for SAMSUNG's EXYNOS SoCs (EXYNOS4/5) @@ -918,7 +851,6 @@ config ARCH_SHARK select PCI select ARCH_USES_GETTIMEOFFSET select NEED_MACH_MEMORY_H - select NEED_MACH_IO_H help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (). @@ -937,6 +869,7 @@ config ARCH_U300 select COMMON_CLK select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select SPARSE_IRQ help Support for ST-Ericsson U300 series mobile platforms. @@ -962,6 +895,7 @@ config ARCH_NOMADIK select COMMON_CLK select GENERIC_CLOCKEVENTS select PINCTRL + select PINCTRL_STN8815 select MIGHT_HAVE_CACHE_L2X0 select ARCH_REQUIRE_GPIOLIB help @@ -977,6 +911,7 @@ config ARCH_DAVINCI select GENERIC_ALLOCATOR select GENERIC_IRQ_CHIP select ARCH_HAS_HOLES_MEMORYMODEL + select NEED_MACH_GPIO_H help Support for TI's DaVinci platform. @@ -989,6 +924,7 @@ config ARCH_OMAP select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select ARCH_HAS_HOLES_MEMORYMODEL + select NEED_MACH_GPIO_H help Support for TI's OMAP platform (OMAP1/2/3/4). @@ -1011,6 +947,10 @@ config ARCH_VT8500 select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB + select USE_OF + select COMMON_CLK + select HAVE_CLK + select CLKDEV_LOOKUP help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. @@ -1028,6 +968,50 @@ config ARCH_ZYNQ Support for Xilinx Zynq ARM Cortex A9 Platform endchoice +menu "Multiple platform selection" + depends on ARCH_MULTIPLATFORM + +comment "CPU Core family selection" + +config ARCH_MULTI_V4 + bool "ARMv4 based platforms (FA526, StrongARM)" + select ARCH_MULTI_V4_V5 + depends on !ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V4T + bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" + select ARCH_MULTI_V4_V5 + depends on !ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V5 + bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" + select ARCH_MULTI_V4_V5 + depends on !ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V4_V5 + bool + +config ARCH_MULTI_V6 + bool "ARMv6 based platforms (ARM11, Scorpion, ...)" + select CPU_V6 + select ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V7 + bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)" + select CPU_V7 + select ARCH_VEXPRESS + default y + select ARCH_MULTI_V6_V7 + +config ARCH_MULTI_V6_V7 + bool + +config ARCH_MULTI_CPU_AUTO + def_bool !(ARCH_MULTI_V4 || ARCH_MULTI_V4T || ARCH_MULTI_V6_V7) + select ARCH_MULTI_V5 + +endmenu + # # This is sorted alphabetically by mach-* pathname. However, plat-* # Kconfigs may be included either alphabetically (according to the @@ -1037,8 +1021,6 @@ source "arch/arm/mach-mvebu/Kconfig" source "arch/arm/mach-at91/Kconfig" -source "arch/arm/mach-bcmring/Kconfig" - source "arch/arm/mach-clps711x/Kconfig" source "arch/arm/mach-cns3xxx/Kconfig" @@ -1055,6 +1037,8 @@ source "arch/arm/mach-gemini/Kconfig" source "arch/arm/mach-h720x/Kconfig" +source "arch/arm/mach-highbank/Kconfig" + source "arch/arm/mach-integrator/Kconfig" source "arch/arm/mach-iop32x/Kconfig" @@ -1090,6 +1074,8 @@ source "arch/arm/mach-omap2/Kconfig" source "arch/arm/mach-orion5x/Kconfig" +source "arch/arm/mach-picoxcell/Kconfig" + source "arch/arm/mach-pxa/Kconfig" source "arch/arm/plat-pxa/Kconfig" @@ -1102,6 +1088,8 @@ source "arch/arm/mach-sa1100/Kconfig" source "arch/arm/plat-samsung/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" +source "arch/arm/mach-socfpga/Kconfig" + source "arch/arm/plat-spear/Kconfig" source "arch/arm/mach-s3c24xx/Kconfig" @@ -1124,6 +1112,8 @@ source "arch/arm/mach-exynos/Kconfig" source "arch/arm/mach-shmobile/Kconfig" +source "arch/arm/mach-prima2/Kconfig" + source "arch/arm/mach-tegra/Kconfig" source "arch/arm/mach-u300/Kconfig" @@ -1135,8 +1125,6 @@ source "arch/arm/mach-versatile/Kconfig" source "arch/arm/mach-vexpress/Kconfig" source "arch/arm/plat-versatile/Kconfig" -source "arch/arm/mach-vt8500/Kconfig" - source "arch/arm/mach-w90x900/Kconfig" # Definitions to make life easier @@ -1154,6 +1142,10 @@ config PLAT_ORION select IRQ_DOMAIN select COMMON_CLK +config PLAT_ORION_LEGACY + bool + select PLAT_ORION + config PLAT_PXA bool @@ -1185,12 +1177,6 @@ config XSCALE_PMU depends on CPU_XSCALE default y -config CPU_HAS_PMU - depends on (CPU_V6 || CPU_V6K || CPU_V7 || XSCALE_PMU) && \ - (!ARCH_OMAP3 || OMAP3_EMU) - default y - bool - config MULTI_IRQ_HANDLER bool help @@ -1419,6 +1405,16 @@ config PL310_ERRATA_769419 on systems with an outer cache, the store buffer is drained explicitly. +config ARM_ERRATA_775420 + bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" + depends on CPU_V7 + help + This option enables the workaround for the 775420 Cortex-A9 (r2p2, + r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance + operation aborts with MMU exception, it might cause the processor + to deadlock. This workaround puts DSB before executing ISB if + an abort may occur on cache maintenance. + endmenu source "arch/arm/common/Kconfig" @@ -1629,6 +1625,7 @@ config ARCH_NR_GPIO default 355 if ARCH_U8500 default 264 if MACH_H4700 default 512 if SOC_OMAP5 + default 288 if ARCH_VT8500 default 0 help Maximum number of GPIOs in the system. @@ -1763,7 +1760,7 @@ config HIGHPTE config HW_PERF_EVENTS bool "Enable hardware performance counter support for perf events" - depends on PERF_EVENTS && CPU_HAS_PMU + depends on PERF_EVENTS default y help Enable hardware performance counter support for perf events. If @@ -1787,59 +1784,6 @@ config FORCE_MAX_ZONEORDER This config option is actually maximum order plus one. For example, a value of 11 means that the largest free memory block is 2^10 pages. -config LEDS - bool "Timer and CPU usage LEDs" - depends on ARCH_CDB89712 || ARCH_EBSA110 || \ - ARCH_EBSA285 || ARCH_INTEGRATOR || \ - ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \ - ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \ - ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \ - ARCH_AT91 || ARCH_DAVINCI || \ - ARCH_KS8695 || MACH_RD88F5182 || ARCH_REALVIEW - help - If you say Y here, the LEDs on your machine will be used - to provide useful information about your current system status. - - If you are compiling a kernel for a NetWinder or EBSA-285, you will - be able to select which LEDs are active using the options below. If - you are compiling a kernel for the EBSA-110 or the LART however, the - red LED will simply flash regularly to indicate that the system is - still functional. It is safe to say Y here if you have a CATS - system, but the driver will do nothing. - -config LEDS_TIMER - bool "Timer LED" if (!ARCH_CDB89712 && !ARCH_OMAP) || \ - OMAP_OSK_MISTRAL || MACH_OMAP_H2 \ - || MACH_OMAP_PERSEUS2 - depends on LEDS - depends on !GENERIC_CLOCKEVENTS - default y if ARCH_EBSA110 - help - If you say Y here, one of the system LEDs (the green one on the - NetWinder, the amber one on the EBSA285, or the red one on the LART) - will flash regularly to indicate that the system is still - operational. This is mainly useful to kernel hackers who are - debugging unstable kernels. - - The LART uses the same LED for both Timer LED and CPU usage LED - functions. You may choose to use both, but the Timer LED function - will overrule the CPU usage LED. - -config LEDS_CPU - bool "CPU usage LED" if (!ARCH_CDB89712 && !ARCH_EBSA110 && \ - !ARCH_OMAP) \ - || OMAP_OSK_MISTRAL || MACH_OMAP_H2 \ - || MACH_OMAP_PERSEUS2 - depends on LEDS - help - If you say Y here, the red LED will be used to give a good real - time indication of CPU usage, by lighting whenever the idle task - is not currently executing. - - The LART uses the same LED for both Timer LED and CPU usage LED - functions. You may choose to use both, but the Timer LED function - will overrule the CPU usage LED. - config ALIGNMENT_TRAP bool depends on CPU_CP15_MMU @@ -1855,8 +1799,8 @@ config ALIGNMENT_TRAP configuration it is safe to say N, otherwise say Y. config UACCESS_WITH_MEMCPY - bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)" - depends on MMU && EXPERIMENTAL + bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()" + depends on MMU default y if CPU_FEROCEON help Implement faster copy_to_user and clear_user methods for CPU @@ -1897,11 +1841,15 @@ config CC_STACKPROTECTOR neutralized via a kernel panic. This feature requires gcc version 4.2 or above. -config DEPRECATED_PARAM_STRUCT - bool "Provide old way to pass kernel parameters" +config XEN_DOM0 + def_bool y + depends on XEN + +config XEN + bool "Xen guest support on ARM (EXPERIMENTAL)" + depends on EXPERIMENTAL && ARM && OF help - This was deprecated in 2001 and announced to live on for 5 years. - Some old boot loaders still use this way. + Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. endmenu @@ -1915,6 +1863,23 @@ config USE_OF help Include support for flattened device tree machine descriptions. +config ATAGS + bool "Support for the traditional ATAGS boot data passing" if USE_OF + default y + help + This is the traditional way of passing data to the kernel at boot + time. If you are solely relying on the flattened device tree (or + the ARM_ATAG_DTB_COMPAT option) then you may unselect this option + to remove ATAGS support from your kernel binary. If unsure, + leave this to y. + +config DEPRECATED_PARAM_STRUCT + bool "Provide old way to pass kernel parameters" + depends on ATAGS + help + This was deprecated in 2001 and announced to live on for 5 years. + Some old boot loaders still use this way. + # Compressed boot loader in ROM. Yes, we really want to ask about # TEXT and BSS so we preserve their values in the config files. config ZBOOT_ROM_TEXT @@ -2041,6 +2006,7 @@ config CMDLINE choice prompt "Kernel command line type" if CMDLINE != "" default CMDLINE_FROM_BOOTLOADER + depends on ATAGS config CMDLINE_FROM_BOOTLOADER bool "Use bootloader kernel arguments if available" @@ -2066,7 +2032,7 @@ endchoice config XIP_KERNEL bool "Kernel Execute-In-Place from ROM" - depends on !ZBOOT_ROM && !ARM_LPAE + depends on !ZBOOT_ROM && !ARM_LPAE && !ARCH_MULTIPLATFORM help Execute-In-Place allows the kernel to run from non-volatile storage directly addressable by the CPU, such as NOR flash. This saves RAM @@ -2110,7 +2076,7 @@ config KEXEC config ATAGS_PROC bool "Export atags in procfs" - depends on KEXEC + depends on ATAGS && KEXEC default y help Should the atags used to boot the kernel be exported in an "atags" @@ -2150,6 +2116,7 @@ source "drivers/cpufreq/Kconfig" config CPU_FREQ_IMX tristate "CPUfreq driver for i.MX CPUs" depends on ARCH_MXC && CPU_FREQ + select CPU_FREQ_TABLE help This enables the CPUfreq driver for i.MX CPUs. @@ -2318,7 +2285,7 @@ menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE - depends on !ARCH_S5PC100 && !ARCH_TEGRA + depends on !ARCH_S5PC100 depends on CPU_ARM920T || CPU_ARM926T || CPU_SA1100 || \ CPU_V6 || CPU_V6K || CPU_V7 || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK def_bool y diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index f15f82bf3a50f808005af479ff9c334f100c1044..b0f3857b3a4c647714a4d748726524e20f01bd4c 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -224,6 +224,20 @@ choice Say Y here if you want kernel low-level debugging support on i.MX6Q UART4. + config DEBUG_MMP_UART2 + bool "Kernel low-level debugging message via MMP UART2" + depends on ARCH_MMP + help + Say Y here if you want kernel low-level debugging support + on MMP UART2. + + config DEBUG_MMP_UART3 + bool "Kernel low-level debugging message via MMP UART3" + depends on ARCH_MMP + help + Say Y here if you want kernel low-level debugging support + on MMP UART3. + config DEBUG_MSM_UART1 bool "Kernel low-level debugging messages via MSM UART1" depends on ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50 @@ -261,6 +275,20 @@ choice Say Y here if you want the debug print routines to direct their output to the serial port on MSM 8960 devices. + config DEBUG_MVEBU_UART + bool "Kernel low-level debugging messages via MVEBU UART" + depends on ARCH_MVEBU + help + Say Y here if you want kernel low-level debugging support + on MVEBU based platforms. + + config DEBUG_PICOXCELL_UART + depends on ARCH_PICOXCELL + bool "Use PicoXcell UART for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on PicoXcell based platforms. + config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" depends on ARCH_REALVIEW @@ -310,6 +338,13 @@ choice The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_SOCFPGA_UART + depends on ARCH_SOCFPGA + bool "Use SOCFPGA UART for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on SOCFPGA based platforms. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -338,6 +373,7 @@ choice config DEBUG_LL_UART_NONE bool "No low-level debugging UART" + depends on !ARCH_MULTIPLATFORM help Say Y here if your platform doesn't provide a UART option below. This relies on your platform choosing the right UART @@ -356,15 +392,15 @@ choice is nothing connected to read from the DCC. config DEBUG_SEMIHOSTING - bool "Kernel low-level debug output via semihosting I" + bool "Kernel low-level debug output via semihosting I/O" help Semihosting enables code running on an ARM target to use the I/O facilities on a host debugger/emulator through a - simple SVC calls. The host debugger or emulator must have + simple SVC call. The host debugger or emulator must have semihosting enabled for the special svc call to be trapped otherwise the kernel will crash. - This is known to work with OpenOCD, as wellas + This is known to work with OpenOCD, as well as ARM's Fast Models, or any other controlling environment that implements semihosting. @@ -373,6 +409,17 @@ choice endchoice +config DEBUG_LL_INCLUDE + string + default "debug/icedcc.S" if DEBUG_ICEDCC + default "debug/highbank.S" if DEBUG_HIGHBANK_UART + default "debug/mvebu.S" if DEBUG_MVEBU_UART + default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART + default "debug/socfpga.S" if DEBUG_SOCFPGA_UART + default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ + DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 + default "mach/debug-macro.S" + config EARLY_PRINTK bool "Early printk" depends on DEBUG_LL diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 30eae87ead6d4b245bc6707040645f5182464e90..f023e3acdfbd8c7c17335cfa9518df05119f4ab7 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -135,84 +135,78 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000 # Machine directory name. This list is sorted alphanumerically # by CONFIG_* macro name. -machine-$(CONFIG_ARCH_AT91) := at91 -machine-$(CONFIG_ARCH_BCMRING) := bcmring -machine-$(CONFIG_ARCH_CLPS711X) := clps711x -machine-$(CONFIG_ARCH_CNS3XXX) := cns3xxx -machine-$(CONFIG_ARCH_DAVINCI) := davinci -machine-$(CONFIG_ARCH_DOVE) := dove -machine-$(CONFIG_ARCH_EBSA110) := ebsa110 -machine-$(CONFIG_ARCH_EP93XX) := ep93xx -machine-$(CONFIG_ARCH_GEMINI) := gemini -machine-$(CONFIG_ARCH_H720X) := h720x -machine-$(CONFIG_ARCH_HIGHBANK) := highbank -machine-$(CONFIG_ARCH_INTEGRATOR) := integrator -machine-$(CONFIG_ARCH_IOP13XX) := iop13xx -machine-$(CONFIG_ARCH_IOP32X) := iop32x -machine-$(CONFIG_ARCH_IOP33X) := iop33x -machine-$(CONFIG_ARCH_IXP4XX) := ixp4xx -machine-$(CONFIG_ARCH_KIRKWOOD) := kirkwood -machine-$(CONFIG_ARCH_KS8695) := ks8695 -machine-$(CONFIG_ARCH_LPC32XX) := lpc32xx -machine-$(CONFIG_ARCH_MMP) := mmp -machine-$(CONFIG_ARCH_MSM) := msm -machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 -machine-$(CONFIG_ARCH_IMX_V4_V5) := imx -machine-$(CONFIG_ARCH_IMX_V6_V7) := imx -machine-$(CONFIG_ARCH_MXS) := mxs -machine-$(CONFIG_ARCH_MVEBU) := mvebu -machine-$(CONFIG_ARCH_NETX) := netx -machine-$(CONFIG_ARCH_NOMADIK) := nomadik -machine-$(CONFIG_ARCH_OMAP1) := omap1 -machine-$(CONFIG_ARCH_OMAP2PLUS) := omap2 -machine-$(CONFIG_ARCH_ORION5X) := orion5x -machine-$(CONFIG_ARCH_PICOXCELL) := picoxcell -machine-$(CONFIG_ARCH_PNX4008) := pnx4008 -machine-$(CONFIG_ARCH_PRIMA2) := prima2 -machine-$(CONFIG_ARCH_PXA) := pxa -machine-$(CONFIG_ARCH_REALVIEW) := realview -machine-$(CONFIG_ARCH_RPC) := rpc -machine-$(CONFIG_ARCH_S3C24XX) := s3c24xx s3c2412 s3c2440 -machine-$(CONFIG_ARCH_S3C64XX) := s3c64xx -machine-$(CONFIG_ARCH_S5P64X0) := s5p64x0 -machine-$(CONFIG_ARCH_S5PC100) := s5pc100 -machine-$(CONFIG_ARCH_S5PV210) := s5pv210 -machine-$(CONFIG_ARCH_EXYNOS4) := exynos -machine-$(CONFIG_ARCH_EXYNOS5) := exynos -machine-$(CONFIG_ARCH_SA1100) := sa1100 -machine-$(CONFIG_ARCH_SHARK) := shark -machine-$(CONFIG_ARCH_SHMOBILE) := shmobile -machine-$(CONFIG_ARCH_TEGRA) := tegra -machine-$(CONFIG_ARCH_U300) := u300 -machine-$(CONFIG_ARCH_U8500) := ux500 -machine-$(CONFIG_ARCH_VERSATILE) := versatile -machine-$(CONFIG_ARCH_VEXPRESS) := vexpress -machine-$(CONFIG_ARCH_VT8500) := vt8500 -machine-$(CONFIG_ARCH_W90X900) := w90x900 -machine-$(CONFIG_FOOTBRIDGE) := footbridge -machine-$(CONFIG_ARCH_SOCFPGA) := socfpga -machine-$(CONFIG_MACH_SPEAR1310) := spear13xx -machine-$(CONFIG_MACH_SPEAR1340) := spear13xx -machine-$(CONFIG_MACH_SPEAR300) := spear3xx -machine-$(CONFIG_MACH_SPEAR310) := spear3xx -machine-$(CONFIG_MACH_SPEAR320) := spear3xx -machine-$(CONFIG_MACH_SPEAR600) := spear6xx -machine-$(CONFIG_ARCH_ZYNQ) := zynq +machine-$(CONFIG_ARCH_AT91) += at91 +machine-$(CONFIG_ARCH_BCM2835) += bcm2835 +machine-$(CONFIG_ARCH_CLPS711X) += clps711x +machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx +machine-$(CONFIG_ARCH_DAVINCI) += davinci +machine-$(CONFIG_ARCH_DOVE) += dove +machine-$(CONFIG_ARCH_EBSA110) += ebsa110 +machine-$(CONFIG_ARCH_EP93XX) += ep93xx +machine-$(CONFIG_ARCH_GEMINI) += gemini +machine-$(CONFIG_ARCH_H720X) += h720x +machine-$(CONFIG_ARCH_HIGHBANK) += highbank +machine-$(CONFIG_ARCH_INTEGRATOR) += integrator +machine-$(CONFIG_ARCH_IOP13XX) += iop13xx +machine-$(CONFIG_ARCH_IOP32X) += iop32x +machine-$(CONFIG_ARCH_IOP33X) += iop33x +machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx +machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood +machine-$(CONFIG_ARCH_KS8695) += ks8695 +machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx +machine-$(CONFIG_ARCH_MMP) += mmp +machine-$(CONFIG_ARCH_MSM) += msm +machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0 +machine-$(CONFIG_ARCH_MXC) += imx +machine-$(CONFIG_ARCH_MXS) += mxs +machine-$(CONFIG_ARCH_MVEBU) += mvebu +machine-$(CONFIG_ARCH_NETX) += netx +machine-$(CONFIG_ARCH_NOMADIK) += nomadik +machine-$(CONFIG_ARCH_OMAP1) += omap1 +machine-$(CONFIG_ARCH_OMAP2PLUS) += omap2 +machine-$(CONFIG_ARCH_ORION5X) += orion5x +machine-$(CONFIG_ARCH_PICOXCELL) += picoxcell +machine-$(CONFIG_ARCH_PRIMA2) += prima2 +machine-$(CONFIG_ARCH_PXA) += pxa +machine-$(CONFIG_ARCH_REALVIEW) += realview +machine-$(CONFIG_ARCH_RPC) += rpc +machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx s3c2412 s3c2440 +machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx +machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0 +machine-$(CONFIG_ARCH_S5PC100) += s5pc100 +machine-$(CONFIG_ARCH_S5PV210) += s5pv210 +machine-$(CONFIG_ARCH_EXYNOS) += exynos +machine-$(CONFIG_ARCH_SA1100) += sa1100 +machine-$(CONFIG_ARCH_SHARK) += shark +machine-$(CONFIG_ARCH_SHMOBILE) += shmobile +machine-$(CONFIG_ARCH_TEGRA) += tegra +machine-$(CONFIG_ARCH_U300) += u300 +machine-$(CONFIG_ARCH_U8500) += ux500 +machine-$(CONFIG_ARCH_VERSATILE) += versatile +machine-$(CONFIG_ARCH_VEXPRESS) += vexpress +machine-$(CONFIG_ARCH_VT8500) += vt8500 +machine-$(CONFIG_ARCH_W90X900) += w90x900 +machine-$(CONFIG_FOOTBRIDGE) += footbridge +machine-$(CONFIG_ARCH_SOCFPGA) += socfpga +machine-$(CONFIG_ARCH_SPEAR13XX) += spear13xx +machine-$(CONFIG_ARCH_SPEAR3XX) += spear3xx +machine-$(CONFIG_MACH_SPEAR600) += spear6xx +machine-$(CONFIG_ARCH_ZYNQ) += zynq # Platform directory name. This list is sorted alphanumerically # by CONFIG_* macro name. -plat-$(CONFIG_ARCH_MXC) := mxc -plat-$(CONFIG_ARCH_OMAP) := omap -plat-$(CONFIG_ARCH_S3C64XX) := samsung -plat-$(CONFIG_ARCH_ZYNQ) := versatile -plat-$(CONFIG_PLAT_IOP) := iop -plat-$(CONFIG_PLAT_NOMADIK) := nomadik -plat-$(CONFIG_PLAT_ORION) := orion -plat-$(CONFIG_PLAT_PXA) := pxa -plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx samsung -plat-$(CONFIG_PLAT_S5P) := samsung -plat-$(CONFIG_PLAT_SPEAR) := spear -plat-$(CONFIG_PLAT_VERSATILE) := versatile +plat-$(CONFIG_ARCH_MXC) += mxc +plat-$(CONFIG_ARCH_OMAP) += omap +plat-$(CONFIG_ARCH_S3C64XX) += samsung +plat-$(CONFIG_ARCH_ZYNQ) += versatile +plat-$(CONFIG_PLAT_IOP) += iop +plat-$(CONFIG_PLAT_NOMADIK) += nomadik +plat-$(CONFIG_PLAT_ORION) += orion +plat-$(CONFIG_PLAT_PXA) += pxa +plat-$(CONFIG_PLAT_S3C24XX) += s3c24xx samsung +plat-$(CONFIG_PLAT_S5P) += samsung +plat-$(CONFIG_PLAT_SPEAR) += spear +plat-$(CONFIG_PLAT_VERSATILE) += versatile ifeq ($(CONFIG_ARCH_EBSA110),y) # This is what happens if you forget the IOCS16 line. @@ -230,15 +224,20 @@ MACHINE := arch/arm/mach-$(word 1,$(machine-y))/ else MACHINE := endif +ifeq ($(CONFIG_ARCH_MULTIPLATFORM),y) +MACHINE := +endif machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y)) +ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y) ifeq ($(KBUILD_SRC),) KBUILD_CPPFLAGS += $(patsubst %,-I%include,$(machdirs) $(platdirs)) else KBUILD_CPPFLAGS += $(patsubst %,-I$(srctree)/%include,$(machdirs) $(platdirs)) endif +endif export TEXT_OFFSET GZFLAGS MMUEXT @@ -251,10 +250,12 @@ endif core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ +core-$(CONFIG_XEN) += arch/arm/xen/ # If we have a machine-specific directory, then include it in the build. core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ core-y += arch/arm/net/ +core-y += arch/arm/crypto/ core-y += $(machdirs) $(platdirs) drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ @@ -268,7 +269,12 @@ else KBUILD_IMAGE := zImage endif -all: $(KBUILD_IMAGE) +# Build the DT binary blobs if we have OF configured +ifeq ($(CONFIG_USE_OF),y) +KBUILD_DTBS := dtbs +endif + +all: $(KBUILD_IMAGE) $(KBUILD_DTBS) boot := arch/arm/boot @@ -284,10 +290,10 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -%.dtb: +%.dtb: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -dtbs: +dtbs: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ # We use MRPROPER_FILES and CLEAN_FILES now @@ -306,7 +312,7 @@ define archhelp echo ' uImage - U-Boot wrapped zImage' echo ' bootpImage - Combined zImage and initial RAM disk' echo ' (supply initrd image via make variable INITRD=)' - echo ' dtbs - Build device tree blobs for enabled boards' + echo '* dtbs - Build device tree blobs for enabled boards' echo ' install - Install uncompressed kernel' echo ' zinstall - Install compressed kernel' echo ' uinstall - Install U-Boot wrapped compressed kernel' diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index c877087d2000cf054be2c086f3de957555f46066..3fdab016aa5cfdc9132813f4c5be44348fb1c539 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -15,6 +15,8 @@ ifneq ($(MACHINE),) include $(srctree)/$(MACHINE)/Makefile.boot endif +include $(srctree)/arch/arm/boot/dts/Makefile + # Note: the following conditions must always be true: # ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET) # PARAMS_PHYS must be within 4MB of ZRELADDR diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c index f41b38cafce80b046217364df5947926dfccf46b..9deb56a702ce743e1534b55054b7d1ba5685e28c 100644 --- a/arch/arm/boot/compressed/decompress.c +++ b/arch/arm/boot/compressed/decompress.c @@ -32,6 +32,9 @@ extern void error(char *); # define Tracecv(c,x) #endif +/* Not needed, but used in some headers pulled in by decompressors */ +extern char * strstr(const char * s1, const char *s2); + #ifdef CONFIG_KERNEL_GZIP #include "../../../../lib/decompress_inflate.c" #endif diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index b8c64b80bafc848032dfff366a9ac4428a7f82b5..bc67cbff39448ff84a3f0c14cd22876975ee1965 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -653,16 +653,21 @@ __armv7_mmu_cache_on: mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs #endif mrc p15, 0, r0, c1, c0, 0 @ read control reg + bic r0, r0, #1 << 28 @ clear SCTLR.TRE orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer #ifdef CONFIG_MMU #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables #endif + mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg orrne r0, r0, #1 @ MMU enabled movne r1, #0xfffffffd @ domain 0 = client + bic r6, r6, #1 << 31 @ 32-bit translation system + bic r6, r6, #3 << 0 @ use only ttbr0 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer mcrne p15, 0, r1, c3, c0, 0 @ load domain access control + mcrne p15, 0, r6, c2, c0, 2 @ load ttb control #endif mcr p15, 0, r0, c7, c5, 4 @ ISB mcr p15, 0, r0, c1, c0, 0 @ load control register diff --git a/arch/arm/boot/compressed/misc.c b/arch/arm/boot/compressed/misc.c index 8e2a8fca5ed205bcbfda7faafa1eb0d7628a863b..df899834d84ed688a8e77e90e0b584789aba6243 100644 --- a/arch/arm/boot/compressed/misc.c +++ b/arch/arm/boot/compressed/misc.c @@ -25,7 +25,13 @@ unsigned int __machine_arch_type; static void putstr(const char *ptr); extern void error(char *x); +#ifdef CONFIG_ARCH_MULTIPLATFORM +static inline void putc(int c) {} +static inline void flush(void) {} +static inline void arch_decomp_setup(void) {} +#else #include +#endif #ifdef CONFIG_DEBUG_ICEDCC diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..29f541f0e6530dde50cea5006cd2bbffc99ccfbf --- /dev/null +++ b/arch/arm/boot/dts/Makefile @@ -0,0 +1,108 @@ +ifeq ($(CONFIG_OF),y) + +dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \ + at91sam9263ek.dtb \ + at91sam9g20ek_2mmc.dtb \ + at91sam9g20ek.dtb \ + at91sam9g25ek.dtb \ + at91sam9m10g45ek.dtb \ + at91sam9n12ek.dtb \ + ethernut5.dtb \ + evk-pro3.dtb \ + kizbox.dtb \ + tny_a9260.dtb \ + tny_a9263.dtb \ + tny_a9g20.dtb \ + usb_a9260.dtb \ + usb_a9263.dtb \ + usb_a9g20.dtb +dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ + dove-cubox.dtb \ + dove-dove-db.dtb +dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ + exynos4210-smdkv310.dtb \ + exynos4210-trats.dtb \ + exynos5250-smdk5250.dtb +dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb +dtb-$(CONFIG_ARCH_IMX5) += imx51-babbage.dtb \ + imx53-ard.dtb \ + imx53-evk.dtb \ + imx53-qsb.dtb \ + imx53-smd.dtb +dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ + imx6q-sabrelite.dtb \ + imx6q-sabresd.dtb +dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb +dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ + kirkwood-dns325.dtb \ + kirkwood-dockstar.dtb \ + kirkwood-dreamplug.dtb \ + kirkwood-goflexnet.dtb \ + kirkwood-ib62x0.dtb \ + kirkwood-iconnect.dtb \ + kirkwood-iomega_ix2_200.dtb \ + kirkwood-km_kirkwood.dtb \ + kirkwood-lschlv2.dtb \ + kirkwood-lsxhl.dtb \ + kirkwood-ts219-6281.dtb \ + kirkwood-ts219-6282.dtb +dtb-$(CONFIG_ARCH_MSM) += msm8660-surf.dtb \ + msm8960-cdp.dtb +dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ + armada-xp-db.dtb +dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \ + imx53-ard.dtb \ + imx53-evk.dtb \ + imx53-qsb.dtb \ + imx53-smd.dtb \ + imx6q-arm2.dtb \ + imx6q-sabrelite.dtb \ + imx6q-sabresd.dtb +dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \ + imx23-olinuxino.dtb \ + imx23-stmp378x_devb.dtb \ + imx28-apx4devkit.dtb \ + imx28-cfa10036.dtb \ + imx28-cfa10049.dtb \ + imx28-evk.dtb \ + imx28-m28evk.dtb \ + imx28-tx28.dtb +dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ + omap3-beagle-xm.dtb \ + omap3-evm.dtb \ + omap3-tobi.dtb \ + omap4-panda.dtb \ + omap4-pandaES.dtb \ + omap4-var_som.dtb \ + omap4-sdp.dtb \ + omap5-evm.dtb +dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb +dtb-$(CONFIG_ARCH_U8500) += snowball.dtb +dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ + r8a7740-armadillo800eva.dtb \ + sh73a0-kzm9g.dtb +dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \ + spear1340-evb.dtb +dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \ + spear310-evb.dtb \ + spear320-evb.dtb +dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb +dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ + tegra20-medcom-wide.dtb \ + tegra20-paz00.dtb \ + tegra20-plutux.dtb \ + tegra20-seaboard.dtb \ + tegra20-tec.dtb \ + tegra20-trimslice.dtb \ + tegra20-ventana.dtb \ + tegra20-whistler.dtb \ + tegra30-cardhu-a02.dtb \ + tegra30-cardhu-a04.dtb +dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ + vexpress-v2p-ca9.dtb \ + vexpress-v2p-ca15-tc1.dtb \ + vexpress-v2p-ca15_a7.dtb \ + xenvm-4.2.dtb + +endif diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index a9af4db7234cae6be39556547b005683b3f47ba0..c634f87e230e110422f246e9228a6a26cbbcb6cb 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -17,4 +17,64 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + ocp { + uart1: serial@44e09000 { + status = "okay"; + }; + + i2c1: i2c@44e0b000 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + }; + }; +}; + +/include/ "tps65217.dtsi" + +&tps { + regulators { + dcdc1_reg: regulator@0 { + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + regulator-always-on; + }; + }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index d6a97d9eff7289c0200b665980260397f85cc946..185d6325a458856768dde864a8c6f9921d9fd88f 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -17,4 +17,104 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + ocp { + uart1: serial@44e09000 { + status = "okay"; + }; + + i2c1: i2c@44e0b000 { + status = "okay"; + clock-frequency = <400000>; + + tps: tps@2d { + reg = <0x2d>; + }; + }; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; +}; + +/include/ "tps65910.dtsi" + +&tps { + vcc1-supply = <&vbat>; + vcc2-supply = <&vbat>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vrtc_reg: regulator@0 { + regulator-always-on; + }; + + vio_reg: regulator@1 { + regulator-always-on; + }; + + vdd1_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1312500>; + regulator-boot-on; + regulator-always-on; + }; + + vdd2_reg: regulator@3 { + /* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912500>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + regulator-always-on; + }; + + vdd3_reg: regulator@4 { + regulator-always-on; + }; + + vdig1_reg: regulator@5 { + regulator-always-on; + }; + + vdig2_reg: regulator@6 { + regulator-always-on; + }; + + vpll_reg: regulator@7 { + regulator-always-on; + }; + + vdac_reg: regulator@8 { + regulator-always-on; + }; + + vaux1_reg: regulator@9 { + regulator-always-on; + }; + + vaux2_reg: regulator@10 { + regulator-always-on; + }; + + vaux33_reg: regulator@11 { + regulator-always-on; + }; + + vmmc_reg: regulator@12 { + regulator-always-on; + }; + }; }; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 59509c48d7e5a5c2474f73ac028f73537e0a6659..bb31bff0199830e989ef39259a89b20b4eb5b4a5 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -69,90 +69,146 @@ #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x44e07000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <96>; }; - gpio2: gpio@4804C000 { + gpio2: gpio@4804c000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x4804c000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <98>; }; - gpio3: gpio@481AC000 { + gpio3: gpio@481ac000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x481ac000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <32>; }; - gpio4: gpio@481AE000 { + gpio4: gpio@481ae000 { compatible = "ti,omap4-gpio"; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <1>; + reg = <0x481ae000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <62>; }; - uart1: serial@44E09000 { + uart1: serial@44e09000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart1"; clock-frequency = <48000000>; + reg = <0x44e09000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <72>; + status = "disabled"; }; uart2: serial@48022000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart2"; clock-frequency = <48000000>; + reg = <0x48022000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <73>; + status = "disabled"; }; uart3: serial@48024000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart3"; clock-frequency = <48000000>; + reg = <0x48024000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <74>; + status = "disabled"; }; - uart4: serial@481A6000 { + uart4: serial@481a6000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart4"; clock-frequency = <48000000>; + reg = <0x481a6000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <44>; + status = "disabled"; }; - uart5: serial@481A8000 { + uart5: serial@481a8000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart5"; clock-frequency = <48000000>; + reg = <0x481a8000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <45>; + status = "disabled"; }; - uart6: serial@481AA000 { + uart6: serial@481aa000 { compatible = "ti,omap3-uart"; ti,hwmods = "uart6"; clock-frequency = <48000000>; + reg = <0x481aa000 0x2000>; + interrupt-parent = <&intc>; + interrupts = <46>; + status = "disabled"; }; - i2c1: i2c@44E0B000 { + i2c1: i2c@44e0b000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; + reg = <0x44e0b000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <70>; + status = "disabled"; }; - i2c2: i2c@4802A000 { + i2c2: i2c@4802a000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; + reg = <0x4802a000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <71>; + status = "disabled"; }; - i2c3: i2c@4819C000 { + i2c3: i2c@4819c000 { compatible = "ti,omap4-i2c"; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; + reg = <0x4819c000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <30>; + status = "disabled"; + }; + + wdt2: wdt@44e35000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + reg = <0x44e35000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <91>; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 6b6b932a5a7dc291c4414ef1fc01404bfff06724..16cc82cdaa817aef1cb2e235c93b8412ddfb7af8 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -63,6 +63,11 @@ reg = <0xd0020300 0x30>; interrupts = <37>, <38>, <39>, <40>; }; + + addr-decoding@d0020000 { + compatible = "marvell,armada-addr-decoding-controller"; + reg = <0xd0020000 0x258>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 3228ccc83332f4e0bbe2bb94d4ed750afcea4fa2..2069151afe01583ecb07c07f7f3cb91477a889d9 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -21,6 +21,12 @@ model = "Marvell Armada 370 family SoC"; compatible = "marvell,armada370", "marvell,armada-370-xp"; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + mpic: interrupt-controller@d0020000 { reg = <0xd0020a00 0x1d0>, <0xd0021870 0x58>; @@ -31,5 +37,43 @@ compatible = "marvell,armada-370-xp-system-controller"; reg = <0xd0018200 0x100>; }; + + pinctrl { + compatible = "marvell,mv88f6710-pinctrl"; + reg = <0xd0018000 0x38>; + }; + + gpio0: gpio@d0018100 { + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; + + gpio2: gpio@d0018180 { + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; + ngpios = <2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <91>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index f97040d4258d97bc81bd2608d8faf320eed3e37c..b1fc728515e9c739ae272004c86a5e6ec1de393e 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -14,11 +14,11 @@ */ /dts-v1/; -/include/ "armada-xp.dtsi" +/include/ "armada-xp-mv78460.dtsi" / { model = "Marvell Armada XP Evaluation Board"; - compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp"; + compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..ea355192be6f0e25968a7b05d1a42cbe4c5dacd3 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -0,0 +1,57 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada XP MV78230 SoC that are not + * common to all Armada XP SoCs. + */ + +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP MV78230 SoC"; + compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + }; + + soc { + pinctrl { + compatible = "marvell,mv78230-pinctrl"; + reg = <0xd0018000 0x38>; + }; + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; + ngpios = <17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <20>, <21>, <22>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..2057863f3dfa5c81e586a4fea92308ff9d3c2bca --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -0,0 +1,70 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada XP MV78260 SoC that are not + * common to all Armada XP SoCs. + */ + +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP MV78260 SoC"; + compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + + soc { + pinctrl { + compatible = "marvell,mv78260-pinctrl"; + reg = <0xd0018000 0x38>; + }; + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <20>, <21>, <22>, <23>; + }; + + gpio2: gpio@d0018180 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018180 0x40>, + <0xd0018870 0x30>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..ffac98373792dd3755226ef9cd664a6dcd507175 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -0,0 +1,70 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada XP MV78460 SoC that are not + * common to all Armada XP SoCs. + */ + +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP MV78460 SoC"; + compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + + soc { + pinctrl { + compatible = "marvell,mv78460-pinctrl"; + reg = <0xd0018000 0x38>; + }; + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <20>, <21>, <22>, <23>; + }; + + gpio2: gpio@d0018180 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018180 0x40>, + <0xd0018870 0x30>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <24>; + }; + }; + }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 66389c1c6f6297e50c8ae3b944d7311dcbb26b6c..7c95f76398de401ac166af8f32d4a34a6b918e79 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -104,6 +104,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -113,6 +114,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -122,6 +124,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index b460d6ce9eb592da5191871b40b2d3433156bcef..195019b7ca0e046073361a587862c885c8fbfb7e 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -95,6 +95,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff400 { @@ -104,6 +105,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff600 { @@ -113,6 +115,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffff800 { @@ -122,6 +125,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioE: gpio@fffffa00 { @@ -131,6 +135,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@ffffee00 { diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 7829a4d0cb22e2b4c010def2ca689e46c7682044..96514c134e54bafd1540c5f55524411b09f1e7a8 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -15,7 +15,7 @@ compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9"; chosen { - bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; + bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs"; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index bafa8806fc17293e3bddc28aff5b4829f677c178..63751b1e744b42611f8e74d17738ccd69dd1efe1 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -113,6 +113,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff400 { @@ -122,6 +123,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff600 { @@ -131,6 +133,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffff800 { @@ -140,6 +143,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioE: gpio@fffffa00 { @@ -149,6 +153,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@ffffee00 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index bfac0dfc332c7d10bc3fe2f87458ec728c48b885..ef9336ae9614f85ffb0ce2348b69fc06b0f756e5 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -107,6 +107,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -116,6 +117,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -125,6 +127,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffffa00 { @@ -134,6 +137,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 4a18c393b1360f490c9796f3c598d349338ed2f5..8a387a8d61b745fc763c9e13f015896bc3e2bff7 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -115,6 +115,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -124,6 +125,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -133,6 +135,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffffa00 { @@ -142,6 +145,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts new file mode 100644 index 0000000000000000000000000000000000000000..7dd860f83f96650bbab24c2ba40fb92cb79bc49f --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -0,0 +1,12 @@ +/dts-v1/; +/memreserve/ 0x0c000000 0x04000000; +/include/ "bcm2835.dtsi" + +/ { + compatible = "raspberrypi,model-b", "brcm,bcm2835"; + model = "Raspberry Pi Model B"; + + memory { + reg = <0 0x10000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..0b619398532c3151dab7656aea148ff62231c217 --- /dev/null +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -0,0 +1,39 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "brcm,bcm2835"; + model = "BCM2835"; + interrupt-parent = <&intc>; + + chosen { + bootargs = "earlyprintk console=ttyAMA0"; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x7e000000 0x20000000 0x02000000>; + + timer { + compatible = "brcm,bcm2835-system-timer"; + reg = <0x7e003000 0x1000>; + interrupts = <1 0>, <1 1>, <1 2>, <1 3>; + clock-frequency = <1000000>; + }; + + intc: interrupt-controller { + compatible = "brcm,bcm2835-armctrl-ic"; + reg = <0x7e00b200 0x200>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + uart@20201000 { + compatible = "brcm,bcm2835-pl011", "arm,pl011", "arm,primecell"; + reg = <0x7e201000 0x1000>; + interrupts = <2 25>; + clock-frequency = <3000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi similarity index 88% rename from arch/arm/boot/dts/db8500.dtsi rename to arch/arm/boot/dts/dbx5x0.dtsi index 3180a9c588b921d21ac9cea8b28e1c91b634686b..748ba7aa746cde3e14b8f04105f2dbd86fc6b214 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -194,6 +194,8 @@ interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; + interrupt-controller; + #interrupt-cells = <2>; ranges; prcmu-timer-4@80157450 { @@ -330,6 +332,7 @@ ab8500@5 { compatible = "stericsson,ab8500"; reg = <5>; /* mailbox 5 is i2c */ + interrupt-parent = <&intc>; interrupts = <0 40 0x4>; interrupt-controller; #interrupt-cells = <2>; @@ -371,7 +374,7 @@ }; ab8500-ponkey { - compatible = "stericsson,ab8500-ponkey"; + compatible = "stericsson,ab8500-poweron-key"; interrupts = <6 0x4 7 0x4>; interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; @@ -389,6 +392,12 @@ compatible = "stericsson,ab8500-debug"; }; + codec: ab8500-codec { + compatible = "stericsson,ab8500-codec"; + + stericsson,earpeice-cmv = <950>; /* Units in mV. */ + }; + ab8500-regulators { compatible = "stericsson,ab8500-regulator"; @@ -471,48 +480,63 @@ }; i2c@80004000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80004000 0x1000>; interrupts = <0 21 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@80122000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80122000 0x1000>; interrupts = <0 22 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@80128000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80128000 0x1000>; interrupts = <0 55 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@80110000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x80110000 0x1000>; interrupts = <0 12 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; i2c@8012a000 { - compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c", "arm,primecell"; reg = <0x8012a000 0x1000>; interrupts = <0 51 0x4>; #address-cells = <1>; #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; }; ssp@80002000 { compatible = "arm,pl022", "arm,primecell"; - reg = <80002000 0x1000>; + reg = <0x80002000 0x1000>; interrupts = <0 14 0x4>; #address-cells = <1>; #size-cells = <0>; @@ -580,6 +604,39 @@ status = "disabled"; }; + msp0: msp@80123000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80123000 0x1000>; + interrupts = <0 31 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + + msp1: msp@80124000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80124000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + + // HDMI sound + msp2: msp@80117000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80117000 0x1000>; + interrupts = <0 98 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + + msp3: msp@80125000 { + compatible = "stericsson,ux500-msp-i2s"; + reg = <0x80125000 0x1000>; + interrupts = <0 62 0x4>; + v-ape-supply = <&db8500_vape_reg>; + status = "disabled"; + }; + external-bus@50000000 { compatible = "simple-bus"; reg = <0x50000000 0x4000000>; diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts new file mode 100644 index 0000000000000000000000000000000000000000..61a8062e56de00f741ce83582257dcb9e1f7b630 --- /dev/null +++ b/arch/arm/boot/dts/dove-cm-a510.dts @@ -0,0 +1,38 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "Compulab CM-A510"; + compatible = "compulab,cm-a510", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; +}; + +&uart0 { status = "okay"; }; +&uart1 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sdio1 { status = "okay"; }; +&sata0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Winbond W25Q32BV */ + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts new file mode 100644 index 0000000000000000000000000000000000000000..0adbd5a38095fb8340253ea351d4156d2993b0cf --- /dev/null +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -0,0 +1,42 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "SolidRun CuBox"; + compatible = "solidrun,cubox", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpio0 18 1>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&uart0 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sata0 { status = "okay"; }; +&i2c0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Winbond W25Q32BV */ + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts new file mode 100644 index 0000000000000000000000000000000000000000..e5a920beab450546a3231941d11c756495b1c516 --- /dev/null +++ b/arch/arm/boot/dts/dove-dove-db.dts @@ -0,0 +1,38 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "Marvell DB-MV88AP510-BP Development Board"; + compatible = "marvell,dove-db", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; +}; + +&uart0 { status = "okay"; }; +&uart1 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sdio1 { status = "okay"; }; +&sata0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash ST-M25P32-VMF6P */ + spi-flash@0 { + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..96fb824b5e6ecb3dd26481dcdbd3d67bb691772d --- /dev/null +++ b/arch/arm/boot/dts/dove.dtsi @@ -0,0 +1,143 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "marvell,dove"; + model = "Marvell Armada 88AP510 SoC"; + + interrupt-parent = <&intc>; + + intc: interrupt-controller { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf1020204 0x04>, + <0xf1020214 0x04>; + }; + + mbus@f1000000 { + compatible = "simple-bus"; + ranges = <0 0xf1000000 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <7>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <8>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart2: serial@12200 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <9>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart3: serial@12300 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <10>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + wdt: wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + }; + + gpio0: gpio@d0400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0400 0x20>; + ngpio = <32>; + interrupts = <12>, <13>, <14>, <60>; + }; + + gpio1: gpio@d0420 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0420 0x20>; + ngpio = <32>; + interrupts = <61>; + }; + + gpio2: gpio@e8400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xe8400 0x0c>; + ngpio = <8>; + }; + + spi0: spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <6>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + spi1: spi@14600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <5>; + reg = <0x14600 0x28>; + status = "disabled"; + }; + + i2c0: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11>; + clock-frequency = <400000>; + timeout-ms = <1000>; + status = "disabled"; + }; + + sdio0: sdio@92000 { + compatible = "marvell,dove-sdhci"; + reg = <0x92000 0x100>; + interrupts = <35>, <37>; + status = "disabled"; + }; + + sdio1: sdio@90000 { + compatible = "marvell,dove-sdhci"; + reg = <0x90000 0x100>; + interrupts = <36>, <38>; + status = "disabled"; + }; + + sata0: sata@a0000 { + compatible = "marvell,orion-sata"; + reg = <0xa0000 0x2400>; + interrupts = <62>; + nr-ports = <1>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts index d79b28d9c963b0a5ae53d217c888258c897684a2..a4ba31b23c88606379bec02dfca9fd6b86fb09ef 100644 --- a/arch/arm/boot/dts/ea3250.dts +++ b/arch/arm/boot/dts/ea3250.dts @@ -166,9 +166,116 @@ #size-cells = <0>; autorepeat; button@21 { - label = "GPIO Key UP"; + label = "Interrupt Key"; linux,code = <103>; gpios = <&gpio 4 1 0>; /* GPI_P3 1 */ }; + key1 { + label = "KEY1"; + linux,code = <1>; + gpios = <&pca9532 0 0>; + }; + key2 { + label = "KEY2"; + linux,code = <2>; + gpios = <&pca9532 1 0>; + }; + key3 { + label = "KEY3"; + linux,code = <3>; + gpios = <&pca9532 2 0>; + }; + key4 { + label = "KEY4"; + linux,code = <4>; + gpios = <&pca9532 3 0>; + }; + joy0 { + label = "Joystick Key 0"; + linux,code = <10>; + gpios = <&gpio 2 0 0>; /* P2.0 */ + }; + joy1 { + label = "Joystick Key 1"; + linux,code = <11>; + gpios = <&gpio 2 1 0>; /* P2.1 */ + }; + joy2 { + label = "Joystick Key 2"; + linux,code = <12>; + gpios = <&gpio 2 2 0>; /* P2.2 */ + }; + joy3 { + label = "Joystick Key 3"; + linux,code = <13>; + gpios = <&gpio 2 3 0>; /* P2.3 */ + }; + joy4 { + label = "Joystick Key 4"; + linux,code = <14>; + gpios = <&gpio 2 4 0>; /* P2.4 */ + }; + }; + + leds { + compatible = "gpio-leds"; + + /* LEDs on OEM Board */ + + led1 { + gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */ + linux,default-trigger = "timer"; + default-state = "off"; + }; + + led2 { + gpios = <&gpio 2 10 1>; /* P2.10, active low */ + default-state = "off"; + }; + + led3 { + gpios = <&gpio 2 11 1>; /* P2.11, active low */ + default-state = "off"; + }; + + led4 { + gpios = <&gpio 2 12 1>; /* P2.12, active low */ + default-state = "off"; + }; + + /* LEDs on Base Board */ + + lede1 { + gpios = <&pca9532 8 0>; + default-state = "off"; + }; + lede2 { + gpios = <&pca9532 9 0>; + default-state = "off"; + }; + lede3 { + gpios = <&pca9532 10 0>; + default-state = "off"; + }; + lede4 { + gpios = <&pca9532 11 0>; + default-state = "off"; + }; + lede5 { + gpios = <&pca9532 12 0>; + default-state = "off"; + }; + lede6 { + gpios = <&pca9532 13 0>; + default-state = "off"; + }; + lede7 { + gpios = <&pca9532 14 0>; + default-state = "off"; + }; + lede8 { + gpios = <&pca9532 15 0>; + default-state = "off"; + }; }; }; diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..f97f70f83374cd4baad62eaccb99624bb0bdc205 --- /dev/null +++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi @@ -0,0 +1,67 @@ +/* + * Common devices used in different OMAP boards + */ + +/ { + elpida_ECB240ABACN: lpddr2 { + compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4"; + density = <2048>; + io-width = <32>; + + tRPab-min-tck = <3>; + tRCD-min-tck = <3>; + tWR-min-tck = <3>; + tRASmin-min-tck = <3>; + tRRD-min-tck = <2>; + tWTR-min-tck = <2>; + tXP-min-tck = <2>; + tRTP-min-tck = <2>; + tCKE-min-tck = <3>; + tCKESR-min-tck = <3>; + tFAW-min-tck = <8>; + + timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <400000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <7500>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + + timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 { + compatible = "jedec,lpddr2-timings"; + min-freq = <10000000>; + max-freq = <200000000>; + tRPab = <21000>; + tRCD = <18000>; + tWR = <15000>; + tRAS-min = <42000>; + tRRD = <10000>; + tWTR = <10000>; + tXP = <7500>; + tRTP = <7500>; + tCKESR = <15000>; + tDQSCK-max = <5500>; + tFAW = <50000>; + tZQCS = <90000>; + tZQCL = <360000>; + tZQinit = <1000000>; + tRAS-max-ns = <70000>; + tDQSCK-max-derated = <6000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..a26c3dd582695f8d5d59cf98a7eb252d5a4f2cfc --- /dev/null +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -0,0 +1,248 @@ +/* + * Samsung's Exynos4 SoC series common device tree source + * + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2010-2011 Linaro Ltd. + * www.linaro.org + * + * Samsung's Exynos4 SoC series device nodes are listed in this file. Particular + * SoCs from Exynos4 series can include this file and provide values for SoCs + * specfic bindings. + * + * Note: This file does not include device nodes for all the controllers in + * Exynos4 SoCs. As device tree coverage for Exynos4 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + }; + + gic:interrupt-controller@10490000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x10490000 0x1000>, <0x10480000 0x100>; + }; + + combiner:interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10440000 0x1000>; + }; + + watchdog@10060000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0x10060000 0x100>; + interrupts = <0 43 0>; + status = "disabled"; + }; + + rtc@10070000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0x10070000 0x100>; + interrupts = <0 44 0>, <0 45 0>; + status = "disabled"; + }; + + keypad@100A0000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0x100A0000 0x100>; + interrupts = <0 109 0>; + status = "disabled"; + }; + + sdhci@12510000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12510000 0x100>; + interrupts = <0 73 0>; + status = "disabled"; + }; + + sdhci@12520000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12520000 0x100>; + interrupts = <0 74 0>; + status = "disabled"; + }; + + sdhci@12530000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12530000 0x100>; + interrupts = <0 75 0>; + status = "disabled"; + }; + + sdhci@12540000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12540000 0x100>; + interrupts = <0 76 0>; + status = "disabled"; + }; + + serial@13800000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13800000 0x100>; + interrupts = <0 52 0>; + status = "disabled"; + }; + + serial@13810000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13810000 0x100>; + interrupts = <0 53 0>; + status = "disabled"; + }; + + serial@13820000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13820000 0x100>; + interrupts = <0 54 0>; + status = "disabled"; + }; + + serial@13830000 { + compatible = "samsung,exynos4210-uart"; + reg = <0x13830000 0x100>; + interrupts = <0 55 0>; + status = "disabled"; + }; + + i2c@13860000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13860000 0x100>; + interrupts = <0 58 0>; + status = "disabled"; + }; + + i2c@13870000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13870000 0x100>; + interrupts = <0 59 0>; + status = "disabled"; + }; + + i2c@13880000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13880000 0x100>; + interrupts = <0 60 0>; + status = "disabled"; + }; + + i2c@13890000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x13890000 0x100>; + interrupts = <0 61 0>; + status = "disabled"; + }; + + i2c@138A0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138A0000 0x100>; + interrupts = <0 62 0>; + status = "disabled"; + }; + + i2c@138B0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138B0000 0x100>; + interrupts = <0 63 0>; + status = "disabled"; + }; + + i2c@138C0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138C0000 0x100>; + interrupts = <0 64 0>; + status = "disabled"; + }; + + i2c@138D0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "samsung,s3c2440-i2c"; + reg = <0x138D0000 0x100>; + interrupts = <0 65 0>; + status = "disabled"; + }; + + spi_0: spi@13920000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13920000 0x100>; + interrupts = <0 66 0>; + tx-dma-channel = <&pdma0 7>; /* preliminary */ + rx-dma-channel = <&pdma0 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi_1: spi@13930000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13930000 0x100>; + interrupts = <0 67 0>; + tx-dma-channel = <&pdma1 7>; /* preliminary */ + rx-dma-channel = <&pdma1 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi_2: spi@13940000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13940000 0x100>; + interrupts = <0 68 0>; + tx-dma-channel = <&pdma0 9>; /* preliminary */ + rx-dma-channel = <&pdma0 8>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@12680000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12680000 0x1000>; + interrupts = <0 35 0>; + }; + + pdma1: pdma@12690000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x12690000 0x1000>; + interrupts = <0 36 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index 0c49caa099786b4c247831da4b539da7a32711ab..3e68f52e8454431d90c5bd1d47de5b791ce56b2e 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -40,6 +40,7 @@ <&gpk2 4 2 3 3>, <&gpk2 5 2 3 3>, <&gpk2 6 2 3 3>; + status = "okay"; }; sdhci@12510000 { @@ -53,6 +54,7 @@ <&gpk0 4 2 3 3>, <&gpk0 5 2 3 3>, <&gpk0 6 2 3 3>; + status = "okay"; }; gpio_keys { @@ -62,88 +64,45 @@ up { label = "Up"; - gpios = <&gpx2 0 0 0 2>; + gpios = <&gpx2 0 0 0x10000 2>; linux,code = <103>; + gpio-key,wakeup; }; down { label = "Down"; - gpios = <&gpx2 1 0 0 2>; + gpios = <&gpx2 1 0 0x10000 2>; linux,code = <108>; + gpio-key,wakeup; }; back { label = "Back"; - gpios = <&gpx1 7 0 0 2>; + gpios = <&gpx1 7 0 0x10000 2>; linux,code = <158>; + gpio-key,wakeup; }; home { label = "Home"; - gpios = <&gpx1 6 0 0 2>; + gpios = <&gpx1 6 0 0x10000 2>; linux,code = <102>; + gpio-key,wakeup; }; menu { label = "Menu"; - gpios = <&gpx1 5 0 0 2>; + gpios = <&gpx1 5 0 0x10000 2>; linux,code = <139>; + gpio-key,wakeup; }; }; - keypad@100A0000 { - status = "disabled"; - }; - - sdhci@12520000 { - status = "disabled"; - }; - - sdhci@12540000 { - status = "disabled"; - }; - - i2c@13860000 { - status = "disabled"; - }; - - i2c@13870000 { - status = "disabled"; - }; - - i2c@13880000 { - status = "disabled"; - }; - - i2c@13890000 { - status = "disabled"; - }; - - i2c@138A0000 { - status = "disabled"; - }; - - i2c@138B0000 { - status = "disabled"; - }; - - i2c@138C0000 { - status = "disabled"; - }; - - i2c@138D0000 { - status = "disabled"; - }; - - spi_0: spi@13920000 { - status = "disabled"; - }; - - spi_1: spi@13930000 { - status = "disabled"; - }; - - spi_2: spi@13940000 { - status = "disabled"; + leds { + compatible = "gpio-leds"; + status { + gpios = <&gpx1 3 0 0x10000 2>; + linux,default-trigger = "heartbeat"; + }; }; }; diff --git a/arch/arm/boot/dts/exynos4210-pinctrl.dtsi b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..b12cf272ad0deb82c0c856de71338dd8242944e9 --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-pinctrl.dtsi @@ -0,0 +1,457 @@ +/* + * Samsung's Exynos4210 SoC pin-mux and pin-config device tree source + * + * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * Copyright (c) 2011-2012 Linaro Ltd. + * www.linaro.org + * + * Samsung's Exynos4210 SoC pin-mux and pin-config optiosn are listed as device + * tree nodes are listed in this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/ { + pinctrl@11400000 { + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart_audio_a: uart-audio-a { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c3_bus: i2c3-bus { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart_audio_b: uart-audio-b { + samsung,pins = "gpa1-4", "gpa1-5"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c4_bus: i2c4-bus { + samsung,pins = "gpb-2", "gpb-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c5_bus: i2c5-bus { + samsung,pins = "gpb-6", "gpb-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ac97_bus: ac97-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2c6_bus: i2c6-bus { + samsung,pins = "gpc1-3", "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c7_bus: i2c7-bus { + samsung,pins = "gpd0-2", "gpd0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@11000000 { + sd0_clk: sd0-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd4_clk: sd4-clk { + samsung,pins = "gpk0-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd4_cmd: sd4-cmd { + samsung,pins = "gpk0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd4_cd: sd4-cd { + samsung,pins = "gpk0-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd4_bus1: sd4-bus-width1 { + samsung,pins = "gpk0-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd4_bus4: sd4-bus-width4 { + samsung,pins = "gpk0-3", "gpk0-4", "gpk0-5", "gpk0-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd4_bus8: sd4-bus-width8 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <4>; + samsung,pin-drv = <0>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpk1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpk1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpk1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpk1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpk1-3", "gpk1-4", "gpk1-5", "gpk1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpk2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpk2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpk2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpk2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpk2-3", "gpk2-4", "gpk2-5", "gpk2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd2_bus8: sd2-bus-width8 { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd3_clk: sd3-clk { + samsung,pins = "gpk3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd3_cmd: sd3-cmd { + samsung,pins = "gpk3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd3_cd: sd3-cd { + samsung,pins = "gpk3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd3_bus1: sd3-bus-width1 { + samsung,pins = "gpk3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pins = "gpk3-3", "gpk3-4", "gpk3-5", "gpk3-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + eint0: ext-int0 { + samsung,pins = "gpx0-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint8: ext-int8 { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint15: ext-int15 { + samsung,pins = "gpx1-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint16: ext-int16 { + samsung,pins = "gpx2-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint31: ext-int31 { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; + + pinctrl@03860000 { + i2s0_bus: i2s0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4", "gpz-5", "gpz-6"; + samsung,pin-function = <0x2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm0_bus: pcm0-bus { + samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3", + "gpz-4"; + samsung,pin-function = <0x3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 1beccc8f14ff948c622a6af681141221139ba021..63610c3ba3afbeffbeee894d2ea75e3b8ed24709 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -26,7 +26,7 @@ }; chosen { - bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc"; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; sdhci@12530000 { @@ -40,6 +40,7 @@ <&gpk2 4 2 3 3>, <&gpk2 5 2 3 3>, <&gpk2 6 2 3 3>; + status = "okay"; }; keypad@100A0000 { @@ -47,6 +48,7 @@ samsung,keypad-num-columns = <8>; linux,keypad-no-autorepeat; linux,keypad-wakeup; + status = "okay"; row-gpios = <&gpx2 0 3 3 0>, <&gpx2 1 3 3 0>; @@ -128,6 +130,7 @@ samsung,i2c-max-bus-freq = <20000>; gpios = <&gpd1 0 2 3 0>, <&gpd1 1 2 3 0>; + status = "okay"; eeprom@50 { compatible = "samsung,24ad0xd1"; @@ -140,58 +143,11 @@ }; }; - sdhci@12510000 { - status = "disabled"; - }; - - sdhci@12520000 { - status = "disabled"; - }; - - sdhci@12540000 { - status = "disabled"; - }; - - i2c@13870000 { - status = "disabled"; - }; - - i2c@13880000 { - status = "disabled"; - }; - - i2c@13890000 { - status = "disabled"; - }; - - i2c@138A0000 { - status = "disabled"; - }; - - i2c@138B0000 { - status = "disabled"; - }; - - i2c@138C0000 { - status = "disabled"; - }; - - i2c@138D0000 { - status = "disabled"; - }; - - spi_0: spi@13920000 { - status = "disabled"; - }; - - spi_1: spi@13930000 { - status = "disabled"; - }; - spi_2: spi@13940000 { gpios = <&gpc1 1 5 3 0>, <&gpc1 3 5 3 0>, <&gpc1 4 5 3 0>; + status = "okay"; w25x80@0 { #address-cells = <1>; diff --git a/arch/arm/boot/dts/exynos4210-trats.dts b/arch/arm/boot/dts/exynos4210-trats.dts new file mode 100644 index 0000000000000000000000000000000000000000..73567b843e72ae28e9ba4e721c8607a6135bf288 --- /dev/null +++ b/arch/arm/boot/dts/exynos4210-trats.dts @@ -0,0 +1,237 @@ +/* + * Samsung's Exynos4210 based Trats board device tree source + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Device tree source file for Samsung's Trats board which is based on + * Samsung's Exynos4210 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +/include/ "exynos4210.dtsi" + +/ { + model = "Samsung Trats based on Exynos4210"; + compatible = "samsung,trats", "samsung,exynos4210"; + + memory { + reg = <0x40000000 0x20000000 + 0x60000000 0x20000000>; + }; + + chosen { + bootargs = "console=ttySAC2,115200N8 root=/dev/mmcblk0p5 rootwait earlyprintk panic=5"; + }; + + vemmc_reg: voltage-regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VMEM_VDD_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpk0 2 1 0 0>; + enable-active-high; + }; + + sdhci_emmc: sdhci@12510000 { + bus-width = <8>; + non-removable; + broken-voltage; + gpios = <&gpk0 0 2 0 3>, + <&gpk0 1 2 0 3>, + <&gpk0 3 2 2 3>, + <&gpk0 4 2 2 3>, + <&gpk0 5 2 2 3>, + <&gpk0 6 2 2 3>, + <&gpk1 3 3 3 3>, + <&gpk1 4 3 3 3>, + <&gpk1 5 3 3 3>, + <&gpk1 6 3 3 3>; + vmmc-supply = <&vemmc_reg>; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + + i2c@138B0000 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-slave-addr = <0x10>; + samsung,i2c-max-bus-freq = <100000>; + gpios = <&gpb 6 3 3 0>, + <&gpb 7 3 3 0>; + status = "okay"; + + max8997_pmic@66 { + compatible = "maxim,max8997-pmic"; + + reg = <0x66>; + + max8997,pmic-buck1-uses-gpio-dvs; + max8997,pmic-buck2-uses-gpio-dvs; + max8997,pmic-buck5-uses-gpio-dvs; + + max8997,pmic-ignore-gpiodvs-side-effect; + max8997,pmic-buck125-default-dvs-idx = <0>; + + max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>, + <&gpx0 6 1 0 0>, + <&gpl0 0 1 0 0>; + + max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>, + <1250000>, <1200000>, + <1150000>, <1100000>, + <1000000>, <950000>; + + max8997,pmic-buck2-dvs-voltage = <1100000>, <1000000>, + <950000>, <900000>, + <1100000>, <1000000>, + <950000>, <900000>; + + max8997,pmic-buck5-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>, + <1200000>, <1200000>; + + regulators { + valive_reg: LDO2 { + regulator-name = "VALIVE_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vusb_reg: LDO3 { + regulator-name = "VUSB_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + vmipi_reg: LDO4 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vpda_reg: LDO6 { + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcam_reg: LDO7 { + regulator-name = "CAM_ISP_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vusbdac_reg: LDO8 { + regulator-name = "VUSB/VDAC_3.3V_C210"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vccpda_reg: LDO9 { + regulator-name = "VCC_2.8V_PDA"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + vpll_reg: LDO10 { + regulator-name = "VPLL_1.1V_C210"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + vcclcd_reg: LDO13 { + regulator-name = "VCC_3.3V_LCD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + vlcd_reg: LDO15 { + regulator-name = "VLCD_2.2V"; + regulator-min-microvolt = <2200000>; + regulator-max-microvolt = <2200000>; + }; + + camsensor_reg: LDO16 { + regulator-name = "CAM_SENSOR_IO_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + vddq_reg: LDO21 { + regulator-name = "VDDQ_M1M2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + varm_breg: BUCK1 { + regulator-name = "VARM_1.2V_C210"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + vint_breg: BUCK2 { + regulator-name = "VINT_1.1V_C210"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + camisp_breg: BUCK4 { + regulator-name = "CAM_ISP_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + vmem_breg: BUCK5 { + regulator-name = "VMEM_1.2V_C210"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vccsub_breg: BUCK7 { + regulator-name = "VCC_SUB_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + safe1_sreg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-always-on; + }; + + safe2_sreg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 02891fe876e43bbbdb947aae28840baa7f9fa860..214c557eda7f7119584df481bde074c43a3611d4 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -19,199 +19,60 @@ * published by the Free Software Foundation. */ -/include/ "skeleton.dtsi" +/include/ "exynos4.dtsi" +/include/ "exynos4210-pinctrl.dtsi" / { compatible = "samsung,exynos4210"; - interrupt-parent = <&gic>; aliases { - spi0 = &spi_0; - spi1 = &spi_1; - spi2 = &spi_2; + pinctrl0 = &pinctrl_0; + pinctrl1 = &pinctrl_1; + pinctrl2 = &pinctrl_2; }; gic:interrupt-controller@10490000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; cpu-offset = <0x8000>; - reg = <0x10490000 0x1000>, <0x10480000 0x100>; }; combiner:interrupt-controller@10440000 { - compatible = "samsung,exynos4210-combiner"; - #interrupt-cells = <2>; - interrupt-controller; - reg = <0x10440000 0x1000>; interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; }; - watchdog@10060000 { - compatible = "samsung,s3c2410-wdt"; - reg = <0x10060000 0x100>; - interrupts = <0 43 0>; - }; - - rtc@10070000 { - compatible = "samsung,s3c6410-rtc"; - reg = <0x10070000 0x100>; - interrupts = <0 44 0>, <0 45 0>; - }; - - keypad@100A0000 { - compatible = "samsung,s5pv210-keypad"; - reg = <0x100A0000 0x100>; - interrupts = <0 109 0>; - }; - - sdhci@12510000 { - compatible = "samsung,exynos4210-sdhci"; - reg = <0x12510000 0x100>; - interrupts = <0 73 0>; - }; - - sdhci@12520000 { - compatible = "samsung,exynos4210-sdhci"; - reg = <0x12520000 0x100>; - interrupts = <0 74 0>; - }; - - sdhci@12530000 { - compatible = "samsung,exynos4210-sdhci"; - reg = <0x12530000 0x100>; - interrupts = <0 75 0>; - }; - - sdhci@12540000 { - compatible = "samsung,exynos4210-sdhci"; - reg = <0x12540000 0x100>; - interrupts = <0 76 0>; - }; - - serial@13800000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13800000 0x100>; - interrupts = <0 52 0>; - }; - - serial@13810000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13810000 0x100>; - interrupts = <0 53 0>; - }; - - serial@13820000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13820000 0x100>; - interrupts = <0 54 0>; - }; - - serial@13830000 { - compatible = "samsung,exynos4210-uart"; - reg = <0x13830000 0x100>; - interrupts = <0 55 0>; - }; - - i2c@13860000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13860000 0x100>; - interrupts = <0 58 0>; - }; - - i2c@13870000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13870000 0x100>; - interrupts = <0 59 0>; - }; - - i2c@13880000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13880000 0x100>; - interrupts = <0 60 0>; - }; - - i2c@13890000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x13890000 0x100>; - interrupts = <0 61 0>; - }; - - i2c@138A0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x138A0000 0x100>; - interrupts = <0 62 0>; - }; - - i2c@138B0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x138B0000 0x100>; - interrupts = <0 63 0>; - }; - - i2c@138C0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x138C0000 0x100>; - interrupts = <0 64 0>; - }; - - i2c@138D0000 { - compatible = "samsung,s3c2440-i2c"; - reg = <0x138D0000 0x100>; - interrupts = <0 65 0>; - }; - - spi_0: spi@13920000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13920000 0x100>; - interrupts = <0 66 0>; - tx-dma-channel = <&pdma0 7>; /* preliminary */ - rx-dma-channel = <&pdma0 6>; /* preliminary */ - #address-cells = <1>; - #size-cells = <0>; - }; - - spi_1: spi@13930000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13930000 0x100>; - interrupts = <0 67 0>; - tx-dma-channel = <&pdma1 7>; /* preliminary */ - rx-dma-channel = <&pdma1 6>; /* preliminary */ - #address-cells = <1>; - #size-cells = <0>; - }; - - spi_2: spi@13940000 { - compatible = "samsung,exynos4210-spi"; - reg = <0x13940000 0x100>; - interrupts = <0 68 0>; - tx-dma-channel = <&pdma0 9>; /* preliminary */ - rx-dma-channel = <&pdma0 8>; /* preliminary */ - #address-cells = <1>; - #size-cells = <0>; + pinctrl_0: pinctrl@11400000 { + compatible = "samsung,pinctrl-exynos4210"; + reg = <0x11400000 0x1000>; + interrupts = <0 47 0>; + interrupt-controller; + #interrupt-cells = <2>; }; - amba { - #address-cells = <1>; - #size-cells = <1>; - compatible = "arm,amba-bus"; - interrupt-parent = <&gic>; - ranges; + pinctrl_1: pinctrl@11000000 { + compatible = "samsung,pinctrl-exynos4210"; + reg = <0x11000000 0x1000>; + interrupts = <0 46 0>; + interrupt-controller; + #interrupt-cells = <2>; - pdma0: pdma@12680000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12680000 0x1000>; - interrupts = <0 35 0>; + wakup_eint: wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 0>, <0 17 0>, <0 18 0>, <0 19 0>, + <0 20 0>, <0 21 0>, <0 22 0>, <0 23 0>, + <0 24 0>, <0 25 0>, <0 26 0>, <0 27 0>, + <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>, + <0 32 0>; }; + }; - pdma1: pdma@12690000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x12690000 0x1000>; - interrupts = <0 36 0>; - }; + pinctrl_2: pinctrl@03860000 { + compatible = "samsung,pinctrl-exynos4210"; + reg = <0x03860000 0x1000>; }; gpio-controllers { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 8a5e348793c765e8caf189004f8c04848378206d..a352df403b7a5586ad1b2a47cb51c9eca0e89b0e 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -16,12 +16,19 @@ model = "SAMSUNG SMDK5250 board based on EXYNOS5250"; compatible = "samsung,smdk5250", "samsung,exynos5250"; + aliases { + mshc0 = &dwmmc_0; + mshc1 = &dwmmc_1; + mshc2 = &dwmmc_2; + mshc3 = &dwmmc_3; + }; + memory { reg = <0x40000000 0x80000000>; }; chosen { - bootargs = "root=/dev/ram0 rw ramdisk=8192 console=ttySAC1,115200"; + bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc"; }; i2c@12C60000 { @@ -72,6 +79,56 @@ status = "disabled"; }; + dwmmc_0: dwmmc0@12200000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; + + slot@0 { + reg = <0>; + bus-width = <8>; + gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, + <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, + <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, + <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, + <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; + }; + }; + + dwmmc_1: dwmmc1@12210000 { + status = "disabled"; + }; + + dwmmc_2: dwmmc2@12220000 { + num-slots = <1>; + supports-highspeed; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3 3>; + samsung,dw-mshc-ddr-timing = <1 2 3>; + + slot@0 { + reg = <0>; + bus-width = <4>; + samsung,cd-pinmux-gpio = <&gpc3 2 2 3 3>; + gpios = <&gpc3 0 2 0 3>, <&gpc3 1 2 0 3>, + <&gpc3 3 2 3 3>, <&gpc3 4 2 3 3>, + <&gpc3 5 2 3 3>, <&gpc3 6 2 3 3>, + <&gpc4 3 3 3 3>, <&gpc4 3 3 3 3>, + <&gpc4 5 3 3 3>, <&gpc4 6 3 3 3>; + }; + }; + + dwmmc_3: dwmmc3@12230000 { + status = "disabled"; + }; + spi_0: spi@12d20000 { status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 004aaa8d123cd66fed607c7c45ebc5827cd018dd..dddfd6e444dcb1edbcb1d6f94617e6d29f87e5c7 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -27,6 +27,10 @@ spi0 = &spi_0; spi1 = &spi_1; spi2 = &spi_2; + gsc0 = &gsc_0; + gsc1 = &gsc_1; + gsc2 = &gsc_2; + gsc3 = &gsc_3; }; gic:interrupt-controller@10481000 { @@ -182,6 +186,38 @@ #size-cells = <0>; }; + dwmmc0@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc1@12210000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12210000 0x1000>; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc2@12220000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12220000 0x1000>; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc3@12230000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12230000 0x1000>; + interrupts = <0 78 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + amba { #address-cells = <1>; #size-cells = <1>; @@ -460,4 +496,28 @@ #gpio-cells = <4>; }; }; + + gsc_0: gsc@0x13e00000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e00000 0x1000>; + interrupts = <0 85 0>; + }; + + gsc_1: gsc@0x13e10000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e10000 0x1000>; + interrupts = <0 86 0>; + }; + + gsc_2: gsc@0x13e20000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e20000 0x1000>; + interrupts = <0 87 0>; + }; + + gsc_3: gsc@0x13e30000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e30000 0x1000>; + interrupts = <0 88 0>; + }; }; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 9fecf1ae777bac14b2770c0cf09dd601e85b73b8..0c6fc34821f93f336fd705626c35da8b9cbba9f3 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -121,6 +121,10 @@ compatible = "calxeda,hb-ahci"; reg = <0xffe08000 0x10000>; interrupts = <0 83 4>; + calxeda,port-phys = <&combophy5 0 &combophy0 0 + &combophy0 1 &combophy0 2 + &combophy0 3>; + dma-coherent; }; sdhci@ffe0e000 { @@ -306,5 +310,19 @@ reg = <0xfff51000 0x1000>; interrupts = <0 80 4 0 81 4 0 82 4>; }; + + combophy0: combo-phy@fff58000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff58000 0x1000>; + phydev = <5>; + }; + + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; }; }; diff --git a/arch/arm/boot/dts/hrefv60plus.dts b/arch/arm/boot/dts/hrefv60plus.dts new file mode 100644 index 0000000000000000000000000000000000000000..2131d77dc9c924adc0c8a0062e552a644dd542d6 --- /dev/null +++ b/arch/arm/boot/dts/hrefv60plus.dts @@ -0,0 +1,95 @@ +/* + * Copyright 2012 ST-Ericsson AB + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "dbx5x0.dtsi" + +/ { + model = "ST-Ericsson HREF platform with Device Tree"; + compatible = "st-ericsson,hrefv60+"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + soc-u9500 { + uart@80120000 { + status = "okay"; + }; + + uart@80121000 { + status = "okay"; + }; + + uart@80007000 { + status = "okay"; + }; + + i2c@80004000 { + tc3589x@42 { + compatible = "tc3589x"; + reg = <0x42>; + interrupt-parent = <&gpio6>; + interrupts = <25 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + + tc3589x_gpio: tc3589x_gpio { + compatible = "tc3589x-gpio"; + interrupts = <0 0x1>; + + interrupt-controller; + #interrupt-cells = <2>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + tps61052@33 { + compatible = "tps61052"; + reg = <0x33>; + }; + }; + + i2c@80128000 { + lp5521@0x33 { + compatible = "lp5521"; + reg = <0x33>; + }; + + lp5521@0x34 { + compatible = "lp5521"; + reg = <0x34>; + }; + + bh1780@0x29 { + compatible = "rohm,bh1780gli"; + reg = <0x33>; + }; + }; + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + msp1: msp@80124000 { + status = "okay"; + }; + + msp3: msp@80125000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index e3486f486b405cfb74cb1dcbe41f808a49f5e658..035c13f9d3c05b3410dfb13ae7c50325712e550e 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -42,12 +42,13 @@ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */ 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts index 20912b1d8893bada21336eb75c062c4a7b5db88c..384d8b66f337e1ceec0388a9e49e6eeae5ffadce 100644 --- a/arch/arm/boot/dts/imx23-olinuxino.dts +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -31,6 +31,22 @@ bus-width = <4>; status = "okay"; }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2013 /* MX23_PAD_SSP1_DETECT__GPIO_2_1 */ + 0x0113 /* MX23_PAD_GPMI_ALE__GPIO_0_17 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; }; apbx@80040000 { @@ -39,6 +55,47 @@ pinctrl-0 = <&duart_pins_a>; status = "okay"; }; + + auart0: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + startup-delay-us = <300>; /* LAN9215 requires a POR of 200us minimum */ + gpio = <&gpio0 17 0>; + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "green"; + gpios = <&gpio2 1 0>; + linux,default-trigger = "default-on"; }; }; }; diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts index 757a327ff3e8a6fd50897e3217a6118a2da80631..85c3864b6a56a92de2a85d52ddb35bcc1ce15c4f 100644 --- a/arch/arm/boot/dts/imx23-stmp378x_devb.dts +++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts @@ -36,7 +36,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index e6138310e5ced961a269b903fadcfff6869c7be2..9ca4ca70c1bcb8f680fde33b924045eb6666839d 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -43,7 +43,7 @@ ranges; icoll: interrupt-controller@80000000 { - compatible = "fsl,imx23-icoll", "fsl,mxs-icoll"; + compatible = "fsl,imx23-icoll", "fsl,icoll"; interrupt-controller; #interrupt-cells = <1>; reg = <0x80000000 0x2000>; @@ -52,6 +52,7 @@ dma-apbh@80004000 { compatible = "fsl,imx23-dma-apbh"; reg = <0x80004000 0x2000>; + clocks = <&clks 15>; }; ecc@80008000 { @@ -67,6 +68,7 @@ reg-names = "gpmi-nand", "bch"; interrupts = <13>, <56>; interrupt-names = "gpmi-dma", "bch"; + clocks = <&clks 34>; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -74,6 +76,7 @@ ssp0: ssp@80010000 { reg = <0x80010000 0x2000>; interrupts = <15 14>; + clocks = <&clks 33>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; @@ -140,6 +143,17 @@ fsl,pull-up = <0>; }; + auart0_2pins_a: auart0-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x01e2 /* MX23_PAD_I2C_SCL__AUART1_TX */ + 0x01f2 /* MX23_PAD_I2C_SDA__AUART1_RX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + gpmi_pins_a: gpmi-nand@0 { reg = <0>; fsl,pinmux-ids = < @@ -183,7 +197,6 @@ 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ - 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ >; fsl,drive-strength = <1>; @@ -280,6 +293,7 @@ dma-apbx@80024000 { compatible = "fsl,imx23-dma-apbx"; reg = <0x80024000 0x2000>; + clocks = <&clks 16>; }; dcp@80028000 { @@ -306,12 +320,14 @@ compatible = "fsl,imx23-lcdif"; reg = <0x80030000 2000>; interrupts = <46 45>; + clocks = <&clks 38>; status = "disabled"; }; ssp1: ssp@80034000 { reg = <0x80034000 0x2000>; interrupts = <2 20>; + clocks = <&clks 33>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; @@ -329,9 +345,10 @@ reg = <0x80040000 0x40000>; ranges; - clkctl@80040000 { + clks: clkctrl@80040000 { + compatible = "fsl,imx23-clkctrl"; reg = <0x80040000 0x2000>; - status = "disabled"; + #clock-cells = <1>; }; saif0: saif@80042000 { @@ -383,20 +400,23 @@ pwm: pwm@80064000 { compatible = "fsl,imx23-pwm"; reg = <0x80064000 0x2000>; + clocks = <&clks 30>; #pwm-cells = <2>; fsl,pwm-number = <5>; status = "disabled"; }; timrot@80068000 { + compatible = "fsl,imx23-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; - status = "disabled"; + interrupts = <28 29 30 31>; }; auart0: serial@8006c000 { compatible = "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <24 25 23>; + clocks = <&clks 32>; status = "disabled"; }; @@ -404,6 +424,7 @@ compatible = "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <59 60 58>; + clocks = <&clks 32>; status = "disabled"; }; @@ -411,11 +432,15 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x80070000 0x2000>; interrupts = <0>; + clocks = <&clks 32>, <&clks 16>; + clock-names = "uart", "apb_pclk"; status = "disabled"; }; - usbphy@8007c000 { + usbphy0: usbphy@8007c000 { + compatible = "fsl,imx23-usbphy"; reg = <0x8007c000 0x2000>; + clocks = <&clks 41>; status = "disabled"; }; }; @@ -428,8 +453,12 @@ reg = <0x80080000 0x80000>; ranges; - usbctrl@80080000 { + usb0: usb@80080000 { + compatible = "fsl,imx23-usb", "fsl,imx27-usb"; reg = <0x80080000 0x40000>; + interrupts = <11>; + fsl,usbphy = <&usbphy0>; + clocks = <&clks 40>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore.dts b/arch/arm/boot/dts/imx27-phytec-phycore.dts index 2b0ff60247a41468a6d3cb5886b1bba25f7e1506..af50469e34b2931306acf88a3d8ea289253388e2 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore.dts @@ -23,10 +23,6 @@ soc { aipi@10000000 { /* aipi */ - wdog@10002000 { - status = "okay"; - }; - serial@1000a000 { fsl,uart-has-rtscts; status = "okay"; @@ -49,7 +45,7 @@ i2c@1001d000 { clock-frequency = <400000>; status = "okay"; - at24@4c { + at24@52 { compatible = "at,24c32"; pagesize = <32>; reg = <0x52>; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 5303ab680a3461614e324b27ed455f7da01b253d..3e54f1498841ca7ff3da6636cabd7d9274e3bd65 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -62,7 +62,6 @@ compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; reg = <0x10002000 0x4000>; interrupts = <27>; - status = "disabled"; }; uart1: serial@1000a000 { diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts index b383417a558f4b07ee55e85157d44ebc180c7bf7..5171667a7763f47cc967efdf7481e0eb73e4090c 100644 --- a/arch/arm/boot/dts/imx28-apx4devkit.dts +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -37,7 +37,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ diff --git a/arch/arm/boot/dts/imx28-cfa10049.dts b/arch/arm/boot/dts/imx28-cfa10049.dts new file mode 100644 index 0000000000000000000000000000000000000000..05c892e931e31521b462f2b0075bc20b00d4511e --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10049.dts @@ -0,0 +1,99 @@ +/* + * Copyright 2012 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/* + * The CFA-10049 is an expansion board for the CFA-10036 module, thus we + * need to include the CFA-10036 DTS. + */ +/include/ "imx28-cfa10036.dts" + +/ { + model = "Crystalfontz CFA-10049 Board"; + compatible = "crystalfontz,cfa10049", "crystalfontz,cfa10036", "fsl,imx28"; + + apb@80000000 { + apbh@80000000 { + pinctrl@80018000 { + spi3_pins_cfa10049: spi3-cfa10049@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0181 /* MX28_PAD_GPMI_RDN__SSP3_SCK */ + 0x01c1 /* MX28_PAD_GPMI_RESETN__SSP3_CMD */ + 0x0111 /* MX28_PAD_GPMI_CE1N__SSP3_D3 */ + 0x01a2 /* MX28_PAD_GPMI_ALE__SSP3_D4 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + }; + + ssp3: ssp@80016000 { + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi3_pins_cfa10049>; + status = "okay"; + + gpio5: gpio5@0 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + registers-number = <2>; + spi-max-frequency = <100000>; + }; + + gpio6: gpio6@1 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <1>; + registers-number = <4>; + spi-max-frequency = <100000>; + }; + + }; + }; + + apbx@80040000 { + i2c1: i2c@8005a000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + }; + }; + + ahb@80080000 { + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-0 = <&usbphy1_pins_a>; + pinctrl-names = "default"; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio0 7 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index 773c0e84d1fb54cb1724c03e0101b0053d483bee..a0ad71ca3a4402a40c39d5a2d2050208cf9d6089 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -46,11 +46,28 @@ wp-gpios = <&gpio0 28 0>; }; + ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "sst,sst25vf016b"; + spi-max-frequency = <40000000>; + reg = <0>; + }; + }; + pinctrl@80018000 { pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */ @@ -128,6 +145,10 @@ status = "okay"; }; + lradc@80050000 { + status = "okay"; + }; + i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; @@ -140,6 +161,12 @@ VDDIO-supply = <®_3p3v>; }; + + at24@51 { + compatible = "at24,24c32"; + pagesize = <32>; + reg = <0x51>; + }; }; pwm: pwm@80064000 { diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index 183a3fd2d859cdd680511e196e6b9c0af625a287..3bab6b00c52d5addc324a1bf536c2e33cf661296 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -23,6 +23,8 @@ apb@80000000 { apbh@80000000 { gpmi-nand@8000c000 { + #address-cells = <1>; + #size-cells = <1>; pinctrl-names = "default"; pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; status = "okay"; @@ -61,19 +63,40 @@ &mmc0_cd_cfg &mmc0_sck_cfg>; bus-width = <8>; - wp-gpios = <&gpio3 10 1>; + wp-gpios = <&gpio3 10 0>; + vmmc-supply = <®_vddio_sd0>; status = "okay"; }; + ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx28-spi"; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_pins_a>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "m25p80"; + spi-max-frequency = <40000000>; + reg = <0>; + }; + }; + pinctrl@80018000 { pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < + 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ 0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */ 0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */ + 0x30c3 /* MX28_PAD_AUART3_RX__GPIO_3_12 */ + 0x30d3 /* MX28_PAD_AUART3_TX__GPIO_3_13 */ >; fsl,drive-strength = <0>; fsl,voltage = <1>; @@ -129,6 +152,7 @@ i2c0: i2c@80058000 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; + clock-frequency = <400000>; status = "okay"; sgtl5000: codec@0a { @@ -151,32 +175,51 @@ }; }; + lradc@80050000 { + status = "okay"; + }; + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; status = "okay"; }; - auart0: serial@8006a000 { - pinctrl-names = "default"; - pinctrl-0 = <&auart0_2pins_a>; + usbphy0: usbphy@8007c000 { status = "okay"; }; - auart3: serial@80070000 { + usbphy1: usbphy@8007e000 { + status = "okay"; + }; + + auart0: serial@8006a000 { pinctrl-names = "default"; - pinctrl-0 = <&auart3_pins_a>; + pinctrl-0 = <&auart0_2pins_a>; status = "okay"; }; }; }; ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usbphy0_pins_a>; + status = "okay"; + }; + + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&usbphy1_pins_a>; + status = "okay"; + }; + mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; - phy-reset-gpios = <&gpio3 11 0>; status = "okay"; }; @@ -198,6 +241,30 @@ regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 12 0>; + }; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 13 0>; + }; }; sound { diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts index 62bf767409a6f96a1c3641324f1d40c167e21aab..37be532f00550bf868b3265d1a7d7362b3443a35 100644 --- a/arch/arm/boot/dts/imx28-tx28.dts +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -25,7 +25,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hog_pins_a>; - hog_pins_a: hog-gpios@0 { + hog_pins_a: hog@0 { reg = <0>; fsl,pinmux-ids = < 0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */ @@ -34,6 +34,24 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + mac0_pins_gpio: mac0-gpio-mode@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x4003 /* MX28_PAD_ENET0_MDC__GPIO_4_0 */ + 0x4013 /* MX28_PAD_ENET0_MDIO__GPIO_4_1 */ + 0x4023 /* MX28_PAD_ENET0_RX_EN__GPIO_4_2 */ + 0x4033 /* MX28_PAD_ENET0_RXD0__GPIO_4_3 */ + 0x4043 /* MX28_PAD_ENET0_RXD1__GPIO_4_4 */ + 0x4063 /* MX28_PAD_ENET0_TX_EN__GPIO_4_6 */ + 0x4073 /* MX28_PAD_ENET0_TXD0__GPIO_4_7 */ + 0x4083 /* MX28_PAD_ENET0_TXD1__GPIO_4_8 */ + 0x4103 /* MX28_PAD_ENET_CLK__GPIO_4_16 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; }; }; @@ -72,8 +90,9 @@ ahb@80080000 { mac0: ethernet@800f0000 { phy-mode = "rmii"; - pinctrl-names = "default"; + pinctrl-names = "default", "gpio_mode"; pinctrl-0 = <&mac0_pins_a>; + pinctrl-1 = <&mac0_pins_gpio>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 3fa6d190fab4f9a2c1c4c47abc8904bce199b0da..59fbfba23df8b237c6e775ef109106227a802903 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -27,6 +27,8 @@ serial2 = &auart2; serial3 = &auart3; serial4 = &auart4; + ethernet0 = &mac0; + ethernet1 = &mac1; }; cpus { @@ -50,7 +52,7 @@ ranges; icoll: interrupt-controller@80000000 { - compatible = "fsl,imx28-icoll", "fsl,mxs-icoll"; + compatible = "fsl,imx28-icoll", "fsl,icoll"; interrupt-controller; #interrupt-cells = <1>; reg = <0x80000000 0x2000>; @@ -65,6 +67,7 @@ dma-apbh@80004000 { compatible = "fsl,imx28-dma-apbh"; reg = <0x80004000 0x2000>; + clocks = <&clks 25>; }; perfmon@80006000 { @@ -81,34 +84,47 @@ reg-names = "gpmi-nand", "bch"; interrupts = <88>, <41>; interrupt-names = "gpmi-dma", "bch"; + clocks = <&clks 50>; fsl,gpmi-dma-channel = <4>; status = "disabled"; }; ssp0: ssp@80010000 { + #address-cells = <1>; + #size-cells = <0>; reg = <0x80010000 0x2000>; interrupts = <96 82>; + clocks = <&clks 46>; fsl,ssp-dma-channel = <0>; status = "disabled"; }; ssp1: ssp@80012000 { + #address-cells = <1>; + #size-cells = <0>; reg = <0x80012000 0x2000>; interrupts = <97 83>; + clocks = <&clks 47>; fsl,ssp-dma-channel = <1>; status = "disabled"; }; ssp2: ssp@80014000 { + #address-cells = <1>; + #size-cells = <0>; reg = <0x80014000 0x2000>; interrupts = <98 84>; + clocks = <&clks 48>; fsl,ssp-dma-channel = <2>; status = "disabled"; }; ssp3: ssp@80016000 { + #address-cells = <1>; + #size-cells = <0>; reg = <0x80016000 0x2000>; interrupts = <99 85>; + clocks = <&clks 49>; fsl,ssp-dma-channel = <3>; status = "disabled"; }; @@ -410,6 +426,28 @@ fsl,pull-up = <1>; }; + i2c0_pins_b: i2c0@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3001 /* MX28_PAD_AUART0_RX__I2C0_SCL */ + 0x3011 /* MX28_PAD_AUART0_TX__I2C0_SDA */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + i2c1_pins_a: i2c1@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3101 /* MX28_PAD_PWM0__I2C1_SCL */ + 0x3111 /* MX28_PAD_PWM1__I2C1_SDA */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + saif0_pins_a: saif0@0 { reg = <0>; fsl,pinmux-ids = < @@ -453,6 +491,16 @@ fsl,pull-up = <0>; }; + pwm4_pins_a: pwm4@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31d0 /* MX28_PAD_PWM4__PWM_4 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + lcdif_24bit_pins_a: lcdif-24bit@0 { reg = <0>; fsl,pinmux-ids = < @@ -507,6 +555,49 @@ fsl,voltage = <1>; fsl,pull-up = <0>; }; + + spi2_pins_a: spi2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2100 /* MX28_PAD_SSP2_SCK__SSP2_SCK */ + 0x2110 /* MX28_PAD_SSP2_MOSI__SSP2_CMD */ + 0x2120 /* MX28_PAD_SSP2_MISO__SSP2_D0 */ + 0x2130 /* MX28_PAD_SSP2_SS0__SSP2_D3 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + usbphy0_pins_a: usbphy0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2152 /* MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */ + >; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + usbphy0_pins_b: usbphy0@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3061 /* MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */ + >; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + usbphy1_pins_a: usbphy1@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2142 /* MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */ + >; + fsl,drive-strength = <2>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; }; digctl@8001c000 { @@ -523,6 +614,7 @@ dma-apbx@80024000 { compatible = "fsl,imx28-dma-apbx"; reg = <0x80024000 0x2000>; + clocks = <&clks 26>; }; dcp@80028000 { @@ -551,6 +643,7 @@ compatible = "fsl,imx28-lcdif"; reg = <0x80030000 0x2000>; interrupts = <38 86>; + clocks = <&clks 55>; status = "disabled"; }; @@ -558,6 +651,8 @@ compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80032000 0x2000>; interrupts = <8>; + clocks = <&clks 58>, <&clks 58>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -565,6 +660,8 @@ compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80034000 0x2000>; interrupts = <9>; + clocks = <&clks 59>, <&clks 59>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -611,15 +708,17 @@ reg = <0x80040000 0x40000>; ranges; - clkctl@80040000 { + clks: clkctrl@80040000 { + compatible = "fsl,imx28-clkctrl"; reg = <0x80040000 0x2000>; - status = "disabled"; + #clock-cells = <1>; }; saif0: saif@80042000 { compatible = "fsl,imx28-saif"; reg = <0x80042000 0x2000>; interrupts = <59 80>; + clocks = <&clks 53>; fsl,saif-dma-channel = <4>; status = "disabled"; }; @@ -633,12 +732,16 @@ compatible = "fsl,imx28-saif"; reg = <0x80046000 0x2000>; interrupts = <58 81>; + clocks = <&clks 54>; fsl,saif-dma-channel = <5>; status = "disabled"; }; lradc@80050000 { + compatible = "fsl,imx28-lradc"; reg = <0x80050000 0x2000>; + interrupts = <10 14 15 16 17 18 19 + 20 21 22 23 24 25>; status = "disabled"; }; @@ -677,20 +780,23 @@ pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; reg = <0x80064000 0x2000>; + clocks = <&clks 44>; #pwm-cells = <2>; fsl,pwm-number = <8>; status = "disabled"; }; timrot@80068000 { + compatible = "fsl,imx28-timrot", "fsl,timrot"; reg = <0x80068000 0x2000>; - status = "disabled"; + interrupts = <48 49 50 51>; }; auart0: serial@8006a000 { compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; + clocks = <&clks 45>; status = "disabled"; }; @@ -698,6 +804,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <113 72 73>; + clocks = <&clks 45>; status = "disabled"; }; @@ -705,6 +812,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <114 74 75>; + clocks = <&clks 45>; status = "disabled"; }; @@ -712,6 +820,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; interrupts = <115 76 77>; + clocks = <&clks 45>; status = "disabled"; }; @@ -719,6 +828,7 @@ compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; interrupts = <116 78 79>; + clocks = <&clks 45>; status = "disabled"; }; @@ -726,18 +836,22 @@ compatible = "arm,pl011", "arm,primecell"; reg = <0x80074000 0x1000>; interrupts = <47>; + clocks = <&clks 45>, <&clks 26>; + clock-names = "uart", "apb_pclk"; status = "disabled"; }; usbphy0: usbphy@8007c000 { compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007c000 0x2000>; + clocks = <&clks 62>; status = "disabled"; }; usbphy1: usbphy@8007e000 { compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007e000 0x2000>; + clocks = <&clks 63>; status = "disabled"; }; }; @@ -754,6 +868,7 @@ compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80080000 0x10000>; interrupts = <93>; + clocks = <&clks 60>; fsl,usbphy = <&usbphy0>; status = "disabled"; }; @@ -762,6 +877,7 @@ compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80090000 0x10000>; interrupts = <92>; + clocks = <&clks 61>; fsl,usbphy = <&usbphy1>; status = "disabled"; }; @@ -775,6 +891,8 @@ compatible = "fsl,imx28-fec"; reg = <0x800f0000 0x4000>; interrupts = <101>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; status = "disabled"; }; @@ -782,6 +900,8 @@ compatible = "fsl,imx28-fec"; reg = <0x800f4000 0x4000>; interrupts = <102>; + clocks = <&clks 57>, <&clks 57>; + clock-names = "ipg", "ahb"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index cd86177a3ea21aa1dbe3d0dcea633b50661e5552..cbd2b1c7487bcf5a50e9254b851f2415530846ec 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -25,23 +25,31 @@ aips@70000000 { /* aips-1 */ spba@70000000 { esdhc@70004000 { /* ESDHC1 */ - fsl,cd-internal; - fsl,wp-internal; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; + fsl,cd-controller; + fsl,wp-controller; status = "okay"; }; esdhc@70008000 { /* ESDHC2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; cd-gpios = <&gpio1 6 0>; wp-gpios = <&gpio1 5 0>; status = "okay"; }; uart3: serial@7000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; fsl,uart-has-rtscts; status = "okay"; }; ecspi@70010000 { /* ECSPI1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio4 24 0>, <&gpio4 25 0>; status = "okay"; @@ -169,31 +177,43 @@ }; }; - wdog@73f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@73fa8000 { - compatible = "fsl,imx51-iomuxc-babbage"; - reg = <0x73fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 694 0x20d5 /* MX51_PAD_GPIO1_0__SD1_CD */ + 697 0x20d5 /* MX51_PAD_GPIO1_1__SD1_WP */ + 737 0x100 /* MX51_PAD_GPIO1_5__GPIO1_5 */ + 740 0x100 /* MX51_PAD_GPIO1_6__GPIO1_6 */ + 121 0x5 /* MX51_PAD_EIM_A27__GPIO2_21 */ + 402 0x85 /* MX51_PAD_CSPI1_SS0__GPIO4_24 */ + 405 0x85 /* MX51_PAD_CSPI1_SS1__GPIO4_25 */ + >; + }; + }; }; uart1: serial@73fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; fsl,uart-has-rtscts; status = "okay"; }; uart2: serial@73fc0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; status = "okay"; }; }; aips@80000000 { /* aips-2 */ - sdma@83fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; - }; - i2c@83fc4000 { /* I2C2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; status = "okay"; sgtl5000: codec@0a { @@ -206,10 +226,14 @@ }; audmux@83fd0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; status = "okay"; }; ethernet@83fec000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; phy-mode = "mii"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index aaa0c0a4ca8fa0e18dafecf4fac9308ed7330513..75d069fcf8979d9684d2c979badaacdb3d3a7876 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -130,6 +130,34 @@ }; }; + usb@73f80000 { + compatible = "fsl,imx51-usb", "fsl,imx27-usb"; + reg = <0x73f80000 0x0200>; + interrupts = <18>; + status = "disabled"; + }; + + usb@73f80200 { + compatible = "fsl,imx51-usb", "fsl,imx27-usb"; + reg = <0x73f80200 0x0200>; + interrupts = <14>; + status = "disabled"; + }; + + usb@73f80400 { + compatible = "fsl,imx51-usb", "fsl,imx27-usb"; + reg = <0x73f80400 0x0200>; + interrupts = <16>; + status = "disabled"; + }; + + usb@73f80600 { + compatible = "fsl,imx51-usb", "fsl,imx27-usb"; + reg = <0x73f80600 0x0200>; + interrupts = <17>; + status = "disabled"; + }; + gpio1: gpio@73f84000 { compatible = "fsl,imx51-gpio", "fsl,imx35-gpio"; reg = <0x73f84000 0x4000>; @@ -174,7 +202,6 @@ compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f98000 0x4000>; interrupts = <58>; - status = "disabled"; }; wdog@73f9c000 { /* WDOG2 */ @@ -184,6 +211,122 @@ status = "disabled"; }; + iomuxc@73fa8000 { + compatible = "fsl,imx51-iomuxc"; + reg = <0x73fa8000 0x4000>; + + audmux { + pinctrl_audmux_1: audmuxgrp-1 { + fsl,pins = < + 384 0x80000000 /* MX51_PAD_AUD3_BB_TXD__AUD3_TXD */ + 386 0x80000000 /* MX51_PAD_AUD3_BB_RXD__AUD3_RXD */ + 389 0x80000000 /* MX51_PAD_AUD3_BB_CK__AUD3_TXC */ + 391 0x80000000 /* MX51_PAD_AUD3_BB_FS__AUD3_TXFS */ + >; + }; + }; + + fec { + pinctrl_fec_1: fecgrp-1 { + fsl,pins = < + 128 0x80000000 /* MX51_PAD_EIM_EB2__FEC_MDIO */ + 134 0x80000000 /* MX51_PAD_EIM_EB3__FEC_RDATA1 */ + 146 0x80000000 /* MX51_PAD_EIM_CS2__FEC_RDATA2 */ + 152 0x80000000 /* MX51_PAD_EIM_CS3__FEC_RDATA3 */ + 158 0x80000000 /* MX51_PAD_EIM_CS4__FEC_RX_ER */ + 165 0x80000000 /* MX51_PAD_EIM_CS5__FEC_CRS */ + 206 0x80000000 /* MX51_PAD_NANDF_RB2__FEC_COL */ + 213 0x80000000 /* MX51_PAD_NANDF_RB3__FEC_RX_CLK */ + 293 0x80000000 /* MX51_PAD_NANDF_D9__FEC_RDATA0 */ + 298 0x80000000 /* MX51_PAD_NANDF_D8__FEC_TDATA0 */ + 225 0x80000000 /* MX51_PAD_NANDF_CS2__FEC_TX_ER */ + 231 0x80000000 /* MX51_PAD_NANDF_CS3__FEC_MDC */ + 237 0x80000000 /* MX51_PAD_NANDF_CS4__FEC_TDATA1 */ + 243 0x80000000 /* MX51_PAD_NANDF_CS5__FEC_TDATA2 */ + 250 0x80000000 /* MX51_PAD_NANDF_CS6__FEC_TDATA3 */ + 255 0x80000000 /* MX51_PAD_NANDF_CS7__FEC_TX_EN */ + 260 0x80000000 /* MX51_PAD_NANDF_RDY_INT__FEC_TX_CLK */ + >; + }; + }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + 398 0x185 /* MX51_PAD_CSPI1_MISO__ECSPI1_MISO */ + 394 0x185 /* MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI */ + 409 0x185 /* MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK */ + >; + }; + }; + + esdhc1 { + pinctrl_esdhc1_1: esdhc1grp-1 { + fsl,pins = < + 666 0x400020d5 /* MX51_PAD_SD1_CMD__SD1_CMD */ + 669 0x20d5 /* MX51_PAD_SD1_CLK__SD1_CLK */ + 672 0x20d5 /* MX51_PAD_SD1_DATA0__SD1_DATA0 */ + 678 0x20d5 /* MX51_PAD_SD1_DATA1__SD1_DATA1 */ + 684 0x20d5 /* MX51_PAD_SD1_DATA2__SD1_DATA2 */ + 691 0x20d5 /* MX51_PAD_SD1_DATA3__SD1_DATA3 */ + >; + }; + }; + + esdhc2 { + pinctrl_esdhc2_1: esdhc2grp-1 { + fsl,pins = < + 704 0x400020d5 /* MX51_PAD_SD2_CMD__SD2_CMD */ + 707 0x20d5 /* MX51_PAD_SD2_CLK__SD2_CLK */ + 710 0x20d5 /* MX51_PAD_SD2_DATA0__SD2_DATA0 */ + 712 0x20d5 /* MX51_PAD_SD2_DATA1__SD2_DATA1 */ + 715 0x20d5 /* MX51_PAD_SD2_DATA2__SD2_DATA2 */ + 719 0x20d5 /* MX51_PAD_SD2_DATA3__SD2_DATA3 */ + >; + }; + }; + + i2c2 { + pinctrl_i2c2_1: i2c2grp-1 { + fsl,pins = < + 449 0x400001ed /* MX51_PAD_KEY_COL4__I2C2_SCL */ + 454 0x400001ed /* MX51_PAD_KEY_COL5__I2C2_SDA */ + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + 413 0x1c5 /* MX51_PAD_UART1_RXD__UART1_RXD */ + 416 0x1c5 /* MX51_PAD_UART1_TXD__UART1_TXD */ + 418 0x1c5 /* MX51_PAD_UART1_RTS__UART1_RTS */ + 420 0x1c5 /* MX51_PAD_UART1_CTS__UART1_CTS */ + >; + }; + }; + + uart2 { + pinctrl_uart2_1: uart2grp-1 { + fsl,pins = < + 423 0x1c5 /* MX51_PAD_UART2_RXD__UART2_RXD */ + 426 0x1c5 /* MX51_PAD_UART2_TXD__UART2_TXD */ + >; + }; + }; + + uart3 { + pinctrl_uart3_1: uart3grp-1 { + fsl,pins = < + 54 0x1c5 /* MX51_PAD_EIM_D25__UART3_RXD */ + 59 0x1c5 /* MX51_PAD_EIM_D26__UART3_TXD */ + 65 0x1c5 /* MX51_PAD_EIM_D27__UART3_RTS */ + 49 0x1c5 /* MX51_PAD_EIM_D24__UART3_CTS */ + >; + }; + }; + }; + uart1: serial@73fbc000 { compatible = "fsl,imx51-uart", "fsl,imx21-uart"; reg = <0x73fbc000 0x4000>; @@ -219,6 +362,7 @@ compatible = "fsl,imx51-sdma", "fsl,imx35-sdma"; reg = <0x83fb0000 0x4000>; interrupts = <6>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin"; }; cspi@83fc0000 { diff --git a/arch/arm/boot/dts/imx53-ard.dts b/arch/arm/boot/dts/imx53-ard.dts index da895e93a999113e0585905126dd980f3029e80b..4be76f223526c648035f737e15f7c1ed2048285b 100644 --- a/arch/arm/boot/dts/imx53-ard.dts +++ b/arch/arm/boot/dts/imx53-ard.dts @@ -25,31 +25,66 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_2>; cd-gpios = <&gpio1 1 0>; wp-gpios = <&gpio1 9 0>; status = "okay"; }; }; - wdog@53f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@53fa8000 { - compatible = "fsl,imx53-iomuxc-ard"; - reg = <0x53fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1077 0x80000000 /* MX53_PAD_GPIO_1__GPIO1_1 */ + 1085 0x80000000 /* MX53_PAD_GPIO_9__GPIO1_9 */ + 486 0x80000000 /* MX53_PAD_EIM_EB3__GPIO2_31 */ + 739 0x80000000 /* MX53_PAD_GPIO_10__GPIO4_0 */ + 218 0x80000000 /* MX53_PAD_DISP0_DAT16__GPIO5_10 */ + 226 0x80000000 /* MX53_PAD_DISP0_DAT17__GPIO5_11 */ + 233 0x80000000 /* MX53_PAD_DISP0_DAT18__GPIO5_12 */ + 241 0x80000000 /* MX53_PAD_DISP0_DAT19__GPIO5_13 */ + 429 0x80000000 /* MX53_PAD_EIM_D16__EMI_WEIM_D_16 */ + 435 0x80000000 /* MX53_PAD_EIM_D17__EMI_WEIM_D_17 */ + 441 0x80000000 /* MX53_PAD_EIM_D18__EMI_WEIM_D_18 */ + 448 0x80000000 /* MX53_PAD_EIM_D19__EMI_WEIM_D_19 */ + 456 0x80000000 /* MX53_PAD_EIM_D20__EMI_WEIM_D_20 */ + 464 0x80000000 /* MX53_PAD_EIM_D21__EMI_WEIM_D_21 */ + 471 0x80000000 /* MX53_PAD_EIM_D22__EMI_WEIM_D_22 */ + 477 0x80000000 /* MX53_PAD_EIM_D23__EMI_WEIM_D_23 */ + 492 0x80000000 /* MX53_PAD_EIM_D24__EMI_WEIM_D_24 */ + 500 0x80000000 /* MX53_PAD_EIM_D25__EMI_WEIM_D_25 */ + 508 0x80000000 /* MX53_PAD_EIM_D26__EMI_WEIM_D_26 */ + 516 0x80000000 /* MX53_PAD_EIM_D27__EMI_WEIM_D_27 */ + 524 0x80000000 /* MX53_PAD_EIM_D28__EMI_WEIM_D_28 */ + 532 0x80000000 /* MX53_PAD_EIM_D29__EMI_WEIM_D_29 */ + 540 0x80000000 /* MX53_PAD_EIM_D30__EMI_WEIM_D_30 */ + 548 0x80000000 /* MX53_PAD_EIM_D31__EMI_WEIM_D_31 */ + 637 0x80000000 /* MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0 */ + 642 0x80000000 /* MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1 */ + 647 0x80000000 /* MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2 */ + 652 0x80000000 /* MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3 */ + 657 0x80000000 /* MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4 */ + 662 0x80000000 /* MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5 */ + 667 0x80000000 /* MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6 */ + 611 0x80000000 /* MX53_PAD_EIM_OE__EMI_WEIM_OE */ + 616 0x80000000 /* MX53_PAD_EIM_RW__EMI_WEIM_RW */ + 607 0x80000000 /* MX53_PAD_EIM_CS1__EMI_WEIM_CS_1 */ + >; + }; + }; }; uart1: serial@53fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_2>; status = "okay"; }; }; - - aips@60000000 { /* AIPS2 */ - sdma@63fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; - }; - }; }; eim-cs1@f4000000 { diff --git a/arch/arm/boot/dts/imx53-evk.dts b/arch/arm/boot/dts/imx53-evk.dts index 9c798034675e647726df90d6a981cecba89b93ff..a124d1e25258784645fd596be19558afd19ce176 100644 --- a/arch/arm/boot/dts/imx53-evk.dts +++ b/arch/arm/boot/dts/imx53-evk.dts @@ -25,12 +25,16 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; cd-gpios = <&gpio3 13 0>; wp-gpios = <&gpio3 14 0>; status = "okay"; }; ecspi@50010000 { /* ECSPI1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; status = "okay"; @@ -56,32 +60,45 @@ }; esdhc@50020000 { /* ESDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; cd-gpios = <&gpio3 11 0>; wp-gpios = <&gpio3 12 0>; status = "okay"; }; }; - wdog@53f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@53fa8000 { - compatible = "fsl,imx53-iomuxc-evk"; - reg = <0x53fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ + 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ + 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ + 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 705 0x80000000 /* MX53_PAD_EIM_DA14__GPIO3_14 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ + >; + }; + }; }; uart1: serial@53fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; status = "okay"; }; }; aips@60000000 { /* AIPS2 */ - sdma@63fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; - }; - i2c@63fc4000 { /* I2C2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; status = "okay"; pmic: mc13892@08 { @@ -96,6 +113,8 @@ }; ethernet@63fec000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53-qsb.dts b/arch/arm/boot/dts/imx53-qsb.dts index 2d803a9a69496d4b165dc849667c4c5bd26cb1a8..08948af86d1a096611465ab453755e0636fa3e2d 100644 --- a/arch/arm/boot/dts/imx53-qsb.dts +++ b/arch/arm/boot/dts/imx53-qsb.dts @@ -25,6 +25,8 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; cd-gpios = <&gpio3 13 0>; status = "okay"; }; @@ -35,32 +37,46 @@ }; esdhc@50020000 { /* ESDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; cd-gpios = <&gpio3 11 0>; wp-gpios = <&gpio3 12 0>; status = "okay"; }; }; - wdog@53f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@53fa8000 { - compatible = "fsl,imx53-iomuxc-qsb"; - reg = <0x53fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1071 0x80000000 /* MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK */ + 1141 0x80000000 /* MX53_PAD_GPIO_8__GPIO1_8 */ + 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ + 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ + 693 0x80000000 /* MX53_PAD_EIM_DA11__GPIO3_11 */ + 697 0x80000000 /* MX53_PAD_EIM_DA12__GPIO3_12 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + 873 0x80000000 /* MX53_PAD_PATA_DA_1__GPIO7_7 */ + >; + }; + }; }; uart1: serial@53fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; status = "okay"; }; }; aips@60000000 { /* AIPS2 */ - sdma@63fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; - }; - i2c@63fc4000 { /* I2C2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; status = "okay"; sgtl5000: codec@0a { @@ -72,6 +88,8 @@ }; i2c@63fc8000 { /* I2C1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; status = "okay"; accelerometer: mma8450@1c { @@ -158,10 +176,14 @@ }; audmux@63fd0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_1>; status = "okay"; }; ethernet@63fec000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53-smd.dts b/arch/arm/boot/dts/imx53-smd.dts index 08091029168e9bf9d224a1101b458f60c9e847dc..06c68580c842586f4846860c2875854dd347ee82 100644 --- a/arch/arm/boot/dts/imx53-smd.dts +++ b/arch/arm/boot/dts/imx53-smd.dts @@ -25,22 +25,30 @@ aips@50000000 { /* AIPS1 */ spba@50000000 { esdhc@50004000 { /* ESDHC1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1_1>; cd-gpios = <&gpio3 13 0>; wp-gpios = <&gpio4 11 0>; status = "okay"; }; esdhc@50008000 { /* ESDHC2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc2_1>; non-removable; status = "okay"; }; uart3: serial@5000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3_1>; fsl,uart-has-rtscts; status = "okay"; }; ecspi@50010000 { /* ECSPI1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; fsl,spi-num-chipselects = <2>; cs-gpios = <&gpio2 30 0>, <&gpio3 19 0>; status = "okay"; @@ -72,35 +80,49 @@ }; esdhc@50020000 { /* ESDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc3_1>; non-removable; status = "okay"; }; }; - wdog@53f98000 { /* WDOG1 */ - status = "okay"; - }; - iomuxc@53fa8000 { - compatible = "fsl,imx53-iomuxc-smd"; - reg = <0x53fa8000 0x4000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 982 0x80000000 /* MX53_PAD_PATA_DATA14__GPIO2_14 */ + 989 0x80000000 /* MX53_PAD_PATA_DATA15__GPIO2_15 */ + 424 0x80000000 /* MX53_PAD_EIM_EB2__GPIO2_30 */ + 701 0x80000000 /* MX53_PAD_EIM_DA13__GPIO3_13 */ + 449 0x80000000 /* MX53_PAD_EIM_D19__GPIO3_19 */ + 43 0x80000000 /* MX53_PAD_KEY_ROW2__GPIO4_11 */ + 868 0x80000000 /* MX53_PAD_PATA_DA_0__GPIO7_6 */ + >; + }; + }; }; uart1: serial@53fbc000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; status = "okay"; }; uart2: serial@53fc0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2_1>; status = "okay"; }; }; aips@60000000 { /* AIPS2 */ - sdma@63fb0000 { - fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; - }; - i2c@63fc4000 { /* I2C2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2_1>; status = "okay"; codec: sgtl5000@0a { @@ -120,6 +142,8 @@ }; i2c@63fc8000 { /* I2C1 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_1>; status = "okay"; accelerometer: mma8450@1c { @@ -139,6 +163,8 @@ }; ethernet@63fec000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec_1>; phy-mode = "rmii"; phy-reset-gpios = <&gpio7 6 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index dc00c62acc8aefc5f52c7b96a3195ac3e4cf7394..76ebb1ad2675334d38674fda586c9dee87d0cef8 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -135,6 +135,34 @@ }; }; + usb@53f80000 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80000 0x0200>; + interrupts = <18>; + status = "disabled"; + }; + + usb@53f80200 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80200 0x0200>; + interrupts = <14>; + status = "disabled"; + }; + + usb@53f80400 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80400 0x0200>; + interrupts = <16>; + status = "disabled"; + }; + + usb@53f80600 { + compatible = "fsl,imx53-usb", "fsl,imx27-usb"; + reg = <0x53f80600 0x0200>; + interrupts = <17>; + status = "disabled"; + }; + gpio1: gpio@53f84000 { compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53f84000 0x4000>; @@ -179,7 +207,6 @@ compatible = "fsl,imx53-wdt", "fsl,imx21-wdt"; reg = <0x53f98000 0x4000>; interrupts = <58>; - status = "disabled"; }; wdog@53f9c000 { /* WDOG2 */ @@ -189,6 +216,161 @@ status = "disabled"; }; + iomuxc@53fa8000 { + compatible = "fsl,imx53-iomuxc"; + reg = <0x53fa8000 0x4000>; + + audmux { + pinctrl_audmux_1: audmuxgrp-1 { + fsl,pins = < + 10 0x80000000 /* MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC */ + 17 0x80000000 /* MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD */ + 23 0x80000000 /* MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS */ + 30 0x80000000 /* MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD */ + >; + }; + }; + + fec { + pinctrl_fec_1: fecgrp-1 { + fsl,pins = < + 820 0x80000000 /* MX53_PAD_FEC_MDC__FEC_MDC */ + 779 0x80000000 /* MX53_PAD_FEC_MDIO__FEC_MDIO */ + 786 0x80000000 /* MX53_PAD_FEC_REF_CLK__FEC_TX_CLK */ + 791 0x80000000 /* MX53_PAD_FEC_RX_ER__FEC_RX_ER */ + 796 0x80000000 /* MX53_PAD_FEC_CRS_DV__FEC_RX_DV */ + 799 0x80000000 /* MX53_PAD_FEC_RXD1__FEC_RDATA_1 */ + 804 0x80000000 /* MX53_PAD_FEC_RXD0__FEC_RDATA_0 */ + 808 0x80000000 /* MX53_PAD_FEC_TX_EN__FEC_TX_EN */ + 811 0x80000000 /* MX53_PAD_FEC_TXD1__FEC_TDATA_1 */ + 816 0x80000000 /* MX53_PAD_FEC_TXD0__FEC_TDATA_0 */ + >; + }; + }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + 433 0x80000000 /* MX53_PAD_EIM_D16__ECSPI1_SCLK */ + 439 0x80000000 /* MX53_PAD_EIM_D17__ECSPI1_MISO */ + 445 0x80000000 /* MX53_PAD_EIM_D18__ECSPI1_MOSI */ + >; + }; + }; + + esdhc1 { + pinctrl_esdhc1_1: esdhc1grp-1 { + fsl,pins = < + 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */ + 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */ + 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */ + 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */ + 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */ + 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */ + >; + }; + + pinctrl_esdhc1_2: esdhc1grp-2 { + fsl,pins = < + 995 0x1d5 /* MX53_PAD_SD1_DATA0__ESDHC1_DAT0 */ + 1000 0x1d5 /* MX53_PAD_SD1_DATA1__ESDHC1_DAT1 */ + 1010 0x1d5 /* MX53_PAD_SD1_DATA2__ESDHC1_DAT2 */ + 1024 0x1d5 /* MX53_PAD_SD1_DATA3__ESDHC1_DAT3 */ + 941 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC1_DAT4 */ + 948 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC1_DAT5 */ + 955 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC1_DAT6 */ + 962 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC1_DAT7 */ + 1005 0x1d5 /* MX53_PAD_SD1_CMD__ESDHC1_CMD */ + 1018 0x1d5 /* MX53_PAD_SD1_CLK__ESDHC1_CLK */ + >; + }; + }; + + esdhc2 { + pinctrl_esdhc2_1: esdhc2grp-1 { + fsl,pins = < + 1038 0x1d5 /* MX53_PAD_SD2_CMD__ESDHC2_CMD */ + 1032 0x1d5 /* MX53_PAD_SD2_CLK__ESDHC2_CLK */ + 1062 0x1d5 /* MX53_PAD_SD2_DATA0__ESDHC2_DAT0 */ + 1056 0x1d5 /* MX53_PAD_SD2_DATA1__ESDHC2_DAT1 */ + 1050 0x1d5 /* MX53_PAD_SD2_DATA2__ESDHC2_DAT2 */ + 1044 0x1d5 /* MX53_PAD_SD2_DATA3__ESDHC2_DAT3 */ + >; + }; + }; + + esdhc3 { + pinctrl_esdhc3_1: esdhc3grp-1 { + fsl,pins = < + 943 0x1d5 /* MX53_PAD_PATA_DATA8__ESDHC3_DAT0 */ + 950 0x1d5 /* MX53_PAD_PATA_DATA9__ESDHC3_DAT1 */ + 957 0x1d5 /* MX53_PAD_PATA_DATA10__ESDHC3_DAT2 */ + 964 0x1d5 /* MX53_PAD_PATA_DATA11__ESDHC3_DAT3 */ + 893 0x1d5 /* MX53_PAD_PATA_DATA0__ESDHC3_DAT4 */ + 900 0x1d5 /* MX53_PAD_PATA_DATA1__ESDHC3_DAT5 */ + 906 0x1d5 /* MX53_PAD_PATA_DATA2__ESDHC3_DAT6 */ + 912 0x1d5 /* MX53_PAD_PATA_DATA3__ESDHC3_DAT7 */ + 857 0x1d5 /* MX53_PAD_PATA_RESET_B__ESDHC3_CMD */ + 863 0x1d5 /* MX53_PAD_PATA_IORDY__ESDHC3_CLK */ + >; + }; + }; + + i2c1 { + pinctrl_i2c1_1: i2c1grp-1 { + fsl,pins = < + 333 0xc0000000 /* MX53_PAD_CSI0_DAT8__I2C1_SDA */ + 341 0xc0000000 /* MX53_PAD_CSI0_DAT9__I2C1_SCL */ + >; + }; + }; + + i2c2 { + pinctrl_i2c2_1: i2c2grp-1 { + fsl,pins = < + 61 0xc0000000 /* MX53_PAD_KEY_ROW3__I2C2_SDA */ + 53 0xc0000000 /* MX53_PAD_KEY_COL3__I2C2_SCL */ + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + 346 0x1c5 /* MX53_PAD_CSI0_DAT10__UART1_TXD_MUX */ + 354 0x1c5 /* MX53_PAD_CSI0_DAT11__UART1_RXD_MUX */ + >; + }; + + pinctrl_uart1_2: uart1grp-2 { + fsl,pins = < + 828 0x1c5 /* MX53_PAD_PATA_DIOW__UART1_TXD_MUX */ + 832 0x1c5 /* MX53_PAD_PATA_DMACK__UART1_RXD_MUX */ + >; + }; + }; + + uart2 { + pinctrl_uart2_1: uart2grp-1 { + fsl,pins = < + 841 0x1c5 /* MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX */ + 836 0x1c5 /* MX53_PAD_PATA_DMARQ__UART2_TXD_MUX */ + >; + }; + }; + + uart3 { + pinctrl_uart3_1: uart3grp-1 { + fsl,pins = < + 884 0x1c5 /* MX53_PAD_PATA_CS_0__UART3_TXD_MUX */ + 888 0x1c5 /* MX53_PAD_PATA_CS_1__UART3_RXD_MUX */ + 875 0x1c5 /* MX53_PAD_PATA_DA_1__UART3_CTS */ + 880 0x1c5 /* MX53_PAD_PATA_DA_2__UART3_RTS */ + >; + }; + }; + }; + uart1: serial@53fbc000 { compatible = "fsl,imx53-uart", "fsl,imx21-uart"; reg = <0x53fbc000 0x4000>; @@ -203,6 +385,20 @@ status = "disabled"; }; + can1: can@53fc8000 { + compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + reg = <0x53fc8000 0x4000>; + interrupts = <82>; + status = "disabled"; + }; + + can2: can@53fcc000 { + compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan"; + reg = <0x53fcc000 0x4000>; + interrupts = <83>; + status = "disabled"; + }; + gpio5: gpio@53fdc000 { compatible = "fsl,imx53-gpio", "fsl,imx35-gpio"; reg = <0x53fdc000 0x4000>; @@ -277,6 +473,7 @@ compatible = "fsl,imx53-sdma", "fsl,imx35-sdma"; reg = <0x63fb0000 0x4000>; interrupts = <6>; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin"; }; cspi@63fc0000 { diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index d792581672cc0ca1710ffaa232f9837f29e722b6..15df4c105e89c3b0ac20c7c0800307f4aa644a62 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -28,8 +28,27 @@ status = "disabled"; /* gpmi nand conflicts with SD */ }; + aips-bus@02000000 { /* AIPS1 */ + iomuxc@020e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 176 0x80000000 /* MX6Q_PAD_EIM_D25__GPIO_3_25 */ + 1363 0x80000000 /* MX6Q_PAD_NANDF_CS0__GPIO_6_11 */ + 1369 0x80000000 /* MX6Q_PAD_NANDF_CS1__GPIO_6_14 */ + >; + }; + }; + }; + }; + aips-bus@02100000 { /* AIPS2 */ ethernet@02188000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_2>; phy-mode = "rgmii"; status = "okay"; }; @@ -52,6 +71,8 @@ }; uart4: serial@021f0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4_1>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index 72f30f3e6171b4b737d122333c03a25a37189ddb..d152328285a1387b32b9353cf84f579b20a2a813 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -46,15 +46,20 @@ iomuxc@020e0000 { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpio_hog>; + pinctrl-0 = <&pinctrl_hog>; - gpios { - pinctrl_gpio_hog: gpiohog { + hog { + pinctrl_hog: hoggrp { fsl,pins = < - 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ - 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ - 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ - >; + 1450 0x80000000 /* MX6Q_PAD_NANDF_D6__GPIO_2_6 */ + 1458 0x80000000 /* MX6Q_PAD_NANDF_D7__GPIO_2_7 */ + 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ + 152 0x80000000 /* MX6Q_PAD_EIM_D23__GPIO_3_23 */ + 1262 0x80000000 /* MX6Q_PAD_SD3_DAT5__GPIO_7_0 */ + 1270 0x1f0b0 /* MX6Q_PAD_SD3_DAT4__GPIO_7_1 */ + 953 0x80000000 /* MX6Q_PAD_GPIO_0__CCM_CLKO */ + >; }; }; }; @@ -63,6 +68,9 @@ aips-bus@02100000 { /* AIPS2 */ usb@02184000 { /* USB OTG */ vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_1>; + disable-over-current; status = "okay"; }; @@ -71,12 +79,16 @@ }; ethernet@02188000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; phy-mode = "rgmii"; phy-reset-gpios = <&gpio3 23 0>; status = "okay"; }; usdhc@02198000 { /* uSDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_2>; cd-gpios = <&gpio7 0 0>; wp-gpios = <&gpio7 1 0>; vmmc-supply = <®_3p3v>; @@ -84,6 +96,8 @@ }; usdhc@0219c000 { /* uSDHC4 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4_2>; cd-gpios = <&gpio2 6 0>; wp-gpios = <&gpio2 7 0>; vmmc-supply = <®_3p3v>; @@ -99,7 +113,7 @@ uart2: serial@021e8000 { status = "okay"; pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_serial2_1>; + pinctrl-0 = <&pinctrl_uart2_1>; }; i2c@021a0000 { /* I2C1 */ @@ -111,6 +125,7 @@ codec: sgtl5000@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; + clocks = <&clks 169>; VDDA-supply = <®_2p5v>; VDDIO-supply = <®_3p3v>; }; diff --git a/arch/arm/boot/dts/imx6q-sabresd.dts b/arch/arm/boot/dts/imx6q-sabresd.dts index 07509a181178f66231fd33ace4e93628d496266c..e596c28c214d22fcabb237cef02239664a2cb0e4 100644 --- a/arch/arm/boot/dts/imx6q-sabresd.dts +++ b/arch/arm/boot/dts/imx6q-sabresd.dts @@ -22,28 +22,51 @@ }; soc { - aips-bus@02000000 { /* AIPS1 */ spba-bus@02000000 { uart1: serial@02020000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1_1>; status = "okay"; }; }; + + iomuxc@020e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + hog { + pinctrl_hog: hoggrp { + fsl,pins = < + 1402 0x80000000 /* MX6Q_PAD_NANDF_D0__GPIO_2_0 */ + 1410 0x80000000 /* MX6Q_PAD_NANDF_D1__GPIO_2_1 */ + 1418 0x80000000 /* MX6Q_PAD_NANDF_D2__GPIO_2_2 */ + 1426 0x80000000 /* MX6Q_PAD_NANDF_D3__GPIO_2_3 */ + >; + }; + }; + }; }; aips-bus@02100000 { /* AIPS2 */ ethernet@02188000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_1>; phy-mode = "rgmii"; status = "okay"; }; usdhc@02194000 { /* uSDHC2 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2_1>; cd-gpios = <&gpio2 2 0>; wp-gpios = <&gpio2 3 0>; status = "okay"; }; usdhc@02198000 { /* uSDHC3 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3_1>; cd-gpios = <&gpio2 0 0>; wp-gpios = <&gpio2 1 0>; status = "okay"; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index fd57079f71a95281d107da8df2328c37df8cc1d6..f3990b04fecf4661216c9cf321dc817c72e1a0b7 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -97,18 +97,23 @@ dma-apbh@00110000 { compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; reg = <0x00110000 0x2000>; + clocks = <&clks 106>; }; gpmi-nand@00112000 { - compatible = "fsl,imx6q-gpmi-nand"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x00112000 0x2000>, <0x00114000 0x2000>; - reg-names = "gpmi-nand", "bch"; - interrupts = <0 13 0x04>, <0 15 0x04>; - interrupt-names = "gpmi-dma", "bch"; - fsl,gpmi-dma-channel = <0>; - status = "disabled"; + compatible = "fsl,imx6q-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00112000 0x2000>, <0x00114000 0x2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <0 13 0x04>, <0 15 0x04>; + interrupt-names = "gpmi-dma", "bch"; + clocks = <&clks 152>, <&clks 153>, <&clks 151>, + <&clks 150>, <&clks 149>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + fsl,gpmi-dma-channel = <0>; + status = "disabled"; }; timer@00a00600 { @@ -150,6 +155,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02008000 0x4000>; interrupts = <0 31 0x04>; + clocks = <&clks 112>, <&clks 112>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -159,6 +166,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x0200c000 0x4000>; interrupts = <0 32 0x04>; + clocks = <&clks 113>, <&clks 113>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -168,6 +177,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02010000 0x4000>; interrupts = <0 33 0x04>; + clocks = <&clks 114>, <&clks 114>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -177,6 +188,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02014000 0x4000>; interrupts = <0 34 0x04>; + clocks = <&clks 115>, <&clks 115>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -186,6 +199,8 @@ compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02018000 0x4000>; interrupts = <0 35 0x04>; + clocks = <&clks 116>, <&clks 116>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -193,6 +208,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -205,6 +222,7 @@ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 0x04>; + clocks = <&clks 178>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <38 37>; status = "disabled"; @@ -214,6 +232,7 @@ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 0x04>; + clocks = <&clks 179>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <42 41>; status = "disabled"; @@ -223,6 +242,7 @@ compatible = "fsl,imx6q-ssi","fsl,imx21-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 0x04>; + clocks = <&clks 180>; fsl,fifo-depth = <15>; fsl,ssi-dma-events = <46 45>; status = "disabled"; @@ -362,24 +382,26 @@ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 0x04>; - status = "disabled"; + clocks = <&clks 0>; }; wdog@020c0000 { /* WDOG2 */ compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 0x04>; + clocks = <&clks 0>; status = "disabled"; }; - ccm@020c4000 { + clks: ccm@020c4000 { compatible = "fsl,imx6q-ccm"; reg = <0x020c4000 0x4000>; interrupts = <0 87 0x04 0 88 0x04>; + #clock-cells = <1>; }; - anatop@020c8000 { - compatible = "fsl,imx6q-anatop"; + anatop: anatop@020c8000 { + compatible = "fsl,imx6q-anatop", "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; @@ -472,12 +494,14 @@ compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; + clocks = <&clks 182>; }; usbphy2: usbphy@020ca000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = <0 45 0x04>; + clocks = <&clks 183>; }; snvs@020cc000 { @@ -507,6 +531,11 @@ interrupts = <0 89 0x04 0 90 0x04>; }; + gpr: iomuxc-gpr@020e0000 { + compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e0000 0x38>; + }; + iomuxc@020e0000 { compatible = "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; @@ -514,86 +543,207 @@ /* shared pinctrl settings */ audmux { pinctrl_audmux_1: audmux-1 { - fsl,pins = <18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */ - 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */ - 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */ - 3 0x80000000>; /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */ + fsl,pins = < + 18 0x80000000 /* MX6Q_PAD_SD2_DAT0__AUDMUX_AUD4_RXD */ + 1586 0x80000000 /* MX6Q_PAD_SD2_DAT3__AUDMUX_AUD4_TXC */ + 11 0x80000000 /* MX6Q_PAD_SD2_DAT2__AUDMUX_AUD4_TXD */ + 3 0x80000000 /* MX6Q_PAD_SD2_DAT1__AUDMUX_AUD4_TXFS */ + >; + }; + }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = < + 101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ + 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ + 94 0x100b1 /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ + >; + }; + }; + + enet { + pinctrl_enet_1: enetgrp-1 { + fsl,pins = < + 695 0x1b0b0 /* MX6Q_PAD_ENET_MDIO__ENET_MDIO */ + 756 0x1b0b0 /* MX6Q_PAD_ENET_MDC__ENET_MDC */ + 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */ + 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */ + 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */ + 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */ + 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */ + 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */ + 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */ + 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */ + 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */ + 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */ + 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */ + 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */ + 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ + >; + }; + + pinctrl_enet_2: enetgrp-2 { + fsl,pins = < + 890 0x1b0b0 /* MX6Q_PAD_KEY_COL1__ENET_MDIO */ + 909 0x1b0b0 /* MX6Q_PAD_KEY_COL2__ENET_MDC */ + 24 0x1b0b0 /* MX6Q_PAD_RGMII_TXC__ENET_RGMII_TXC */ + 30 0x1b0b0 /* MX6Q_PAD_RGMII_TD0__ENET_RGMII_TD0 */ + 34 0x1b0b0 /* MX6Q_PAD_RGMII_TD1__ENET_RGMII_TD1 */ + 39 0x1b0b0 /* MX6Q_PAD_RGMII_TD2__ENET_RGMII_TD2 */ + 44 0x1b0b0 /* MX6Q_PAD_RGMII_TD3__ENET_RGMII_TD3 */ + 56 0x1b0b0 /* MX6Q_PAD_RGMII_TX_CTL__RGMII_TX_CTL */ + 702 0x1b0b0 /* MX6Q_PAD_ENET_REF_CLK__ENET_TX_CLK */ + 74 0x1b0b0 /* MX6Q_PAD_RGMII_RXC__ENET_RGMII_RXC */ + 52 0x1b0b0 /* MX6Q_PAD_RGMII_RD0__ENET_RGMII_RD0 */ + 61 0x1b0b0 /* MX6Q_PAD_RGMII_RD1__ENET_RGMII_RD1 */ + 66 0x1b0b0 /* MX6Q_PAD_RGMII_RD2__ENET_RGMII_RD2 */ + 70 0x1b0b0 /* MX6Q_PAD_RGMII_RD3__ENET_RGMII_RD3 */ + 48 0x1b0b0 /* MX6Q_PAD_RGMII_RX_CTL__RGMII_RX_CTL */ + >; }; }; gpmi-nand { pinctrl_gpmi_nand_1: gpmi-nand-1 { - fsl,pins = <1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */ - 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */ - 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */ - 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */ - 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */ - 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */ - 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */ - 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */ - 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */ - 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */ - 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */ - 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */ - 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */ - 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */ - 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */ - 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */ - 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */ - 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */ - 1463 0x00b1>; /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */ + fsl,pins = < + 1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */ + 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */ + 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */ + 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */ + 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */ + 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */ + 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */ + 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */ + 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */ + 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */ + 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */ + 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */ + 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */ + 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */ + 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */ + 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */ + 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */ + 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */ + 1463 0x00b1 /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */ + >; }; }; i2c1 { pinctrl_i2c1_1: i2c1grp-1 { - fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ - 196 0x4001b8b1>; /* MX6Q_PAD_EIM_D28__I2C1_SDA */ + fsl,pins = < + 137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ + 196 0x4001b8b1 /* MX6Q_PAD_EIM_D28__I2C1_SDA */ + >; + }; + }; + + uart1 { + pinctrl_uart1_1: uart1grp-1 { + fsl,pins = < + 1140 0x1b0b1 /* MX6Q_PAD_CSI0_DAT10__UART1_TXD */ + 1148 0x1b0b1 /* MX6Q_PAD_CSI0_DAT11__UART1_RXD */ + >; }; }; - serial2 { - pinctrl_serial2_1: serial2grp-1 { - fsl,pins = <183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */ - 191 0x1b0b1>; /* MX6Q_PAD_EIM_D27__UART2_RXD */ + uart2 { + pinctrl_uart2_1: uart2grp-1 { + fsl,pins = < + 183 0x1b0b1 /* MX6Q_PAD_EIM_D26__UART2_TXD */ + 191 0x1b0b1 /* MX6Q_PAD_EIM_D27__UART2_RXD */ + >; + }; + }; + + uart4 { + pinctrl_uart4_1: uart4grp-1 { + fsl,pins = < + 877 0x1b0b1 /* MX6Q_PAD_KEY_COL0__UART4_TXD */ + 885 0x1b0b1 /* MX6Q_PAD_KEY_ROW0__UART4_RXD */ + >; + }; + }; + + usbotg { + pinctrl_usbotg_1: usbotggrp-1 { + fsl,pins = < + 1592 0x17059 /* MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID */ + >; + }; + }; + + usdhc2 { + pinctrl_usdhc2_1: usdhc2grp-1 { + fsl,pins = < + 1577 0x17059 /* MX6Q_PAD_SD2_CMD__USDHC2_CMD */ + 1569 0x10059 /* MX6Q_PAD_SD2_CLK__USDHC2_CLK */ + 16 0x17059 /* MX6Q_PAD_SD2_DAT0__USDHC2_DAT0 */ + 0 0x17059 /* MX6Q_PAD_SD2_DAT1__USDHC2_DAT1 */ + 8 0x17059 /* MX6Q_PAD_SD2_DAT2__USDHC2_DAT2 */ + 1583 0x17059 /* MX6Q_PAD_SD2_DAT3__USDHC2_DAT3 */ + 1430 0x17059 /* MX6Q_PAD_NANDF_D4__USDHC2_DAT4 */ + 1438 0x17059 /* MX6Q_PAD_NANDF_D5__USDHC2_DAT5 */ + 1446 0x17059 /* MX6Q_PAD_NANDF_D6__USDHC2_DAT6 */ + 1454 0x17059 /* MX6Q_PAD_NANDF_D7__USDHC2_DAT7 */ + >; }; }; usdhc3 { pinctrl_usdhc3_1: usdhc3grp-1 { - fsl,pins = <1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ - 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ - 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ - 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ - 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ - 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ - 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */ - 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */ - 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */ - 1241 0x17059>; /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */ + fsl,pins = < + 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ + 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ + 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ + 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ + 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ + 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ + 1265 0x17059 /* MX6Q_PAD_SD3_DAT4__USDHC3_DAT4 */ + 1257 0x17059 /* MX6Q_PAD_SD3_DAT5__USDHC3_DAT5 */ + 1249 0x17059 /* MX6Q_PAD_SD3_DAT6__USDHC3_DAT6 */ + 1241 0x17059 /* MX6Q_PAD_SD3_DAT7__USDHC3_DAT7 */ + >; + }; + + pinctrl_usdhc3_2: usdhc3grp-2 { + fsl,pins = < + 1273 0x17059 /* MX6Q_PAD_SD3_CMD__USDHC3_CMD */ + 1281 0x10059 /* MX6Q_PAD_SD3_CLK__USDHC3_CLK */ + 1289 0x17059 /* MX6Q_PAD_SD3_DAT0__USDHC3_DAT0 */ + 1297 0x17059 /* MX6Q_PAD_SD3_DAT1__USDHC3_DAT1 */ + 1305 0x17059 /* MX6Q_PAD_SD3_DAT2__USDHC3_DAT2 */ + 1312 0x17059 /* MX6Q_PAD_SD3_DAT3__USDHC3_DAT3 */ + >; }; }; usdhc4 { pinctrl_usdhc4_1: usdhc4grp-1 { - fsl,pins = <1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ - 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ - 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ - 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ - 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ - 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ - 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */ - 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */ - 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */ - 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ + fsl,pins = < + 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ + 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ + 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ + 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ + 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ + 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ + 1493 0x17059 /* MX6Q_PAD_SD4_DAT4__USDHC4_DAT4 */ + 1501 0x17059 /* MX6Q_PAD_SD4_DAT5__USDHC4_DAT5 */ + 1509 0x17059 /* MX6Q_PAD_SD4_DAT6__USDHC4_DAT6 */ + 1517 0x17059 /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ + >; }; - }; - ecspi1 { - pinctrl_ecspi1_1: ecspi1grp-1 { - fsl,pins = <101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ - 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ - 94 0x100b1>; /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ + pinctrl_usdhc4_2: usdhc4grp-2 { + fsl,pins = < + 1386 0x17059 /* MX6Q_PAD_SD4_CMD__USDHC4_CMD */ + 1392 0x10059 /* MX6Q_PAD_SD4_CLK__USDHC4_CLK */ + 1462 0x17059 /* MX6Q_PAD_SD4_DAT0__USDHC4_DAT0 */ + 1470 0x17059 /* MX6Q_PAD_SD4_DAT1__USDHC4_DAT1 */ + 1478 0x17059 /* MX6Q_PAD_SD4_DAT2__USDHC4_DAT2 */ + 1486 0x17059 /* MX6Q_PAD_SD4_DAT3__USDHC4_DAT3 */ + >; }; }; }; @@ -612,6 +762,9 @@ compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 0x04>; + clocks = <&clks 155>, <&clks 155>; + clock-names = "ipg", "ahb"; + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q-to1.bin"; }; }; @@ -635,7 +788,9 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = <0 43 0x04>; + clocks = <&clks 162>; fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; status = "disabled"; }; @@ -643,7 +798,9 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = <0 40 0x04>; + clocks = <&clks 162>; fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; status = "disabled"; }; @@ -651,6 +808,8 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = <0 41 0x04>; + clocks = <&clks 162>; + fsl,usbmisc = <&usbmisc 2>; status = "disabled"; }; @@ -658,13 +817,24 @@ compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184600 0x200>; interrupts = <0 42 0x04>; + clocks = <&clks 162>; + fsl,usbmisc = <&usbmisc 3>; status = "disabled"; }; + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + clocks = <&clks 162>; + }; + ethernet@02188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; interrupts = <0 118 0x04 0 119 0x04>; + clocks = <&clks 117>, <&clks 117>; + clock-names = "ipg", "ahb"; status = "disabled"; }; @@ -677,6 +847,8 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 0x04>; + clocks = <&clks 163>, <&clks 163>, <&clks 163>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -684,6 +856,8 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 0x04>; + clocks = <&clks 164>, <&clks 164>, <&clks 164>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -691,6 +865,8 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 0x04>; + clocks = <&clks 165>, <&clks 165>, <&clks 165>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -698,6 +874,8 @@ compatible = "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 0x04>; + clocks = <&clks 166>, <&clks 166>, <&clks 166>; + clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -707,6 +885,7 @@ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; reg = <0x021a0000 0x4000>; interrupts = <0 36 0x04>; + clocks = <&clks 125>; status = "disabled"; }; @@ -716,6 +895,7 @@ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; reg = <0x021a4000 0x4000>; interrupts = <0 37 0x04>; + clocks = <&clks 126>; status = "disabled"; }; @@ -725,6 +905,7 @@ compatible = "fsl,imx6q-i2c", "fsl,imx1-i2c"; reg = <0x021a8000 0x4000>; interrupts = <0 38 0x04>; + clocks = <&clks 127>; status = "disabled"; }; @@ -788,6 +969,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; interrupts = <0 27 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -795,6 +978,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; interrupts = <0 28 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -802,6 +987,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; interrupts = <0 29 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; @@ -809,6 +996,8 @@ compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; interrupts = <0 30 0x04>; + clocks = <&clks 160>, <&clks 161>; + clock-names = "ipg", "per"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..813b91d7bea25f58288e1a5dc783734af0789f2c --- /dev/null +++ b/arch/arm/boot/dts/integrator.dtsi @@ -0,0 +1,76 @@ +/* + * SoC core Device Tree for the ARM Integrator platforms + */ + +/include/ "skeleton.dtsi" + +/ { + timer@13000000 { + reg = <0x13000000 0x100>; + interrupt-parent = <&pic>; + interrupts = <5>; + }; + + timer@13000100 { + reg = <0x13000100 0x100>; + interrupt-parent = <&pic>; + interrupts = <6>; + }; + + timer@13000200 { + reg = <0x13000200 0x100>; + interrupt-parent = <&pic>; + interrupts = <7>; + }; + + pic@14000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x14000000 0x100>; + clear-mask = <0xffffffff>; + }; + + flash@24000000 { + compatible = "cfi-flash"; + reg = <0x24000000 0x02000000>; + }; + + fpga { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&pic>; + + /* + * These PrimeCells are in the same locations and using the + * same interrupts in all Integrators, however the silicon + * version deployed is different. + */ + rtc@15000000 { + reg = <0x15000000 0x1000>; + interrupts = <8>; + }; + + uart@16000000 { + reg = <0x16000000 0x1000>; + interrupts = <1>; + }; + + uart@17000000 { + reg = <0x17000000 0x1000>; + interrupts = <2>; + }; + + kmi@18000000 { + reg = <0x18000000 0x1000>; + interrupts = <3>; + }; + + kmi@19000000 { + reg = <0x19000000 0x1000>; + interrupts = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts new file mode 100644 index 0000000000000000000000000000000000000000..61767757b50a6fa60c399901a4fc7e1c0f0ebf2a --- /dev/null +++ b/arch/arm/boot/dts/integratorap.dts @@ -0,0 +1,68 @@ +/* + * Device Tree for the ARM Integrator/AP platform + */ + +/dts-v1/; +/include/ "integrator.dtsi" + +/ { + model = "ARM Integrator/AP"; + compatible = "arm,integrator-ap"; + + aliases { + arm,timer-primary = &timer2; + arm,timer-secondary = &timer1; + }; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk"; + }; + + timer0: timer@13000000 { + compatible = "arm,integrator-timer"; + }; + + timer1: timer@13000100 { + compatible = "arm,integrator-timer"; + }; + + timer2: timer@13000200 { + compatible = "arm,integrator-timer"; + }; + + pic: pic@14000000 { + valid-mask = <0x003fffff>; + }; + + fpga { + /* + * The Integator/AP predates the idea to have magic numbers + * identifying the PrimeCell in hardware, thus we have to + * supply these from the device tree. + */ + rtc: rtc@15000000 { + compatible = "arm,pl030", "arm,primecell"; + arm,primecell-periphid = <0x00041030>; + }; + + uart0: uart@16000000 { + compatible = "arm,pl010", "arm,primecell"; + arm,primecell-periphid = <0x00041010>; + }; + + uart1: uart@17000000 { + compatible = "arm,pl010", "arm,primecell"; + arm,primecell-periphid = <0x00041010>; + }; + + kmi0: kmi@18000000 { + compatible = "arm,pl050", "arm,primecell"; + arm,primecell-periphid = <0x00041050>; + }; + + kmi1: kmi@19000000 { + compatible = "arm,pl050", "arm,primecell"; + arm,primecell-periphid = <0x00041050>; + }; + }; +}; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts new file mode 100644 index 0000000000000000000000000000000000000000..2dd5e4e48481bf386ee42691bce1ebe4d679aff4 --- /dev/null +++ b/arch/arm/boot/dts/integratorcp.dts @@ -0,0 +1,110 @@ +/* + * Device Tree for the ARM Integrator/CP platform + */ + +/dts-v1/; +/include/ "integrator.dtsi" + +/ { + model = "ARM Integrator/CP"; + compatible = "arm,integrator-cp"; + + aliases { + arm,timer-primary = &timer2; + arm,timer-secondary = &timer1; + }; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk"; + }; + + timer0: timer@13000000 { + compatible = "arm,sp804", "arm,primecell"; + }; + + timer1: timer@13000100 { + compatible = "arm,sp804", "arm,primecell"; + }; + + timer2: timer@13000200 { + compatible = "arm,sp804", "arm,primecell"; + }; + + pic: pic@14000000 { + valid-mask = <0x1fc003ff>; + }; + + cic: cic@10000040 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x10000040 0x100>; + clear-mask = <0xffffffff>; + valid-mask = <0x00000007>; + }; + + sic: sic@ca000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0xca000000 0x100>; + clear-mask = <0x00000fff>; + valid-mask = <0x00000fff>; + }; + + ethernet@c8000000 { + compatible = "smsc,lan91c111"; + reg = <0xc8000000 0x10>; + interrupt-parent = <&pic>; + interrupts = <27>; + }; + + fpga { + /* + * These PrimeCells are at the same location and using + * the same interrupts in all Integrators, but in the CP + * slightly newer versions are deployed. + */ + rtc@15000000 { + compatible = "arm,pl031", "arm,primecell"; + }; + + uart@16000000 { + compatible = "arm,pl011", "arm,primecell"; + }; + + uart@17000000 { + compatible = "arm,pl011", "arm,primecell"; + }; + + kmi@18000000 { + compatible = "arm,pl050", "arm,primecell"; + }; + + kmi@19000000 { + compatible = "arm,pl050", "arm,primecell"; + }; + + /* + * These PrimeCells are only available on the Integrator/CP + */ + mmc@1c000000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x1c000000 0x1000>; + interrupts = <23 24>; + max-frequency = <515633>; + }; + + aaci@1d000000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x1d000000 0x1000>; + interrupts = <25>; + }; + + clcd@c0000000 { + compatible = "arm,pl110", "arm,primecell"; + reg = <0xC0000000 0x1000>; + interrupts = <22>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 7408655f91b500cc5f4a4fc283c6bb30c7c43eac..9b32d0272825fcb172c0ef720c30f74c4202e0f5 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -25,6 +25,16 @@ }; }; + gpio_fan { + /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ + compatible = "gpio-fan"; + gpios = <&gpio1 14 1 + &gpio1 13 1>; + gpio-fan,speed-map = <0 0 + 3000 1 + 6000 2>; + }; + ocp@f1000000 { sata@80000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts new file mode 100644 index 0000000000000000000000000000000000000000..08a582414b88272f04e94207b0ad3463bb4fbff6 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -0,0 +1,57 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Seagate FreeAgent Dockstar"; + compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "data"; + reg = <0x0500000 0xfb00000>; + }; + }; + }; + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio1 14 1>; + linux,default-trigger = "default-on"; + }; + fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 52d9470451069f5445661c79ffa902a7cc49eee1..d97cd9d4753e298689f3e9331eb7945569b416cd 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -12,7 +12,7 @@ }; chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot)"; + bootargs = "console=ttyS0,115200n8 earlyprintk"; linux,initrd-start = <0x4500040>; linux,initrd-end = <0x4800000>; }; @@ -30,7 +30,37 @@ clock-frequency = <200000000>; status = "ok"; }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0xc0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + }; + + partition@100000 { + label = "zImage"; + reg = <0x100000 0x300000>; + }; + + partition@540000 { + label = "initrd"; + reg = <0x540000 0x300000>; + }; + + partition@980000 { + label = "boot"; + reg = <0x980000 0x1f400000>; + }; + }; }; + gpio-leds { compatible = "gpio-leds"; @@ -41,9 +71,13 @@ }; power-blue { label = "power:blue"; - gpios = <&gpio1 11 0>; + gpios = <&gpio1 10 0>; linux,default-trigger = "timer"; }; + power-red { + label = "power:red"; + gpios = <&gpio1 11 0>; + }; usb1 { label = "usb1:blue"; gpios = <&gpio1 12 0>; @@ -65,4 +99,22 @@ gpios = <&gpio1 16 0>; }; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "OTB Button"; + linux,code = <133>; + gpios = <&gpio1 3 1>; + debounce-interval = <100>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio0 12 1>; + debounce-interval = <100>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts new file mode 100644 index 0000000000000000000000000000000000000000..865aeec40a268da8f2a0b2ab3416ccbad4da90f5 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -0,0 +1,105 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Iomega StorCenter ix2-200"; + compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + + lm63: lm63@4c { + compatible = "national,lm63"; + reg = <0x4c>; + }; + }; + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { + label = "uInitrd"; + reg = <0x540000 0x1000000>; + }; + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + gpio-leds { + compatible = "gpio-leds"; + + power_led { + label = "status:white:power_led"; + gpios = <&gpio0 16 0>; + linux,default-trigger = "default-on"; + }; + health_led1 { + label = "status:red:health_led"; + gpios = <&gpio1 5 0>; + }; + health_led2 { + label = "status:white:health_led"; + gpios = <&gpio1 4 0>; + }; + backup_led { + label = "status:blue:backup_led"; + gpios = <&gpio0 15 0>; + }; + }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + Power { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio0 14 1>; + }; + Reset { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio0 12 1>; + }; + OTB { + label = "OTB Button"; + linux,code = <133>; + gpios = <&gpio1 3 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts new file mode 100644 index 0000000000000000000000000000000000000000..75bdb93fed26a9b4d2843d4a230a5389d2f0af46 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -0,0 +1,29 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Keymile Kirkwood Reference Design"; + compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "ok"; + chip-delay = <25>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index cef9616f330aa06fc75769a79fbcf62211b3fea7..4e5b8154a5be5d95535cd5eb9d66f894670c0946 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -14,7 +14,8 @@ ocp@f1000000 { compatible = "simple-bus"; - ranges = <0 0xf1000000 0x4000000>; + ranges = <0x00000000 0xf1000000 0x4000000 + 0xf5000000 0xf5000000 0x0000400>; #address-cells = <1>; #size-cells = <1>; @@ -105,5 +106,14 @@ clock-frequency = <100000>; status = "disabled"; }; + + crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0xf5000000 0x800>; + reg-names = "regs", "sram"; + interrupts = <22>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/mmp2.dtsi b/arch/arm/boot/dts/mmp2.dtsi index 80f74e256408dcf7cf1f34dcfa9594b1d629f238..0514fb41627e1130a52d3c4ed56ff81ea23d68d0 100644 --- a/arch/arm/boot/dts/mmp2.dtsi +++ b/arch/arm/boot/dts/mmp2.dtsi @@ -26,6 +26,11 @@ interrupt-parent = <&intc>; ranges; + L2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0x3>; + }; + axi@d4200000 { /* AXI */ compatible = "mrvl,axi-bus", "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/msm8660-surf.dts b/arch/arm/boot/dts/msm8660-surf.dts index 45bc4bb04e5745969184b9baa3e78e4d4c5402f3..31f2157cd7d700beeaf904cc0f4bfa2bd0783492 100644 --- a/arch/arm/boot/dts/msm8660-surf.dts +++ b/arch/arm/boot/dts/msm8660-surf.dts @@ -7,7 +7,7 @@ compatible = "qcom,msm8660-surf", "qcom,msm8660"; interrupt-parent = <&intc>; - intc: interrupt-controller@02080000 { + intc: interrupt-controller@2080000 { compatible = "qcom,msm-8660-qgic"; interrupt-controller; #interrupt-cells = <3>; @@ -15,6 +15,23 @@ < 0x02081000 0x1000 >; }; + timer@2000004 { + compatible = "qcom,msm-gpt", "qcom,msm-timer"; + interrupts = <1 1 0x301>; + reg = <0x02000004 0x10>; + clock-frequency = <32768>; + cpu-offset = <0x40000>; + }; + + timer@2000024 { + compatible = "qcom,msm-dgt", "qcom,msm-timer"; + interrupts = <1 0 0x301>; + reg = <0x02000024 0x10>, + <0x02000034 0x4>; + clock-frequency = <6750000>; + cpu-offset = <0x40000>; + }; + serial@19c400000 { compatible = "qcom,msm-hsuart", "qcom,msm-uart"; reg = <0x19c40000 0x1000>, diff --git a/arch/arm/boot/dts/msm8960-cdp.dts b/arch/arm/boot/dts/msm8960-cdp.dts new file mode 100644 index 0000000000000000000000000000000000000000..9e621b5ad3ddf4e1996ef3cb2c72e3cfbdbe0a4a --- /dev/null +++ b/arch/arm/boot/dts/msm8960-cdp.dts @@ -0,0 +1,41 @@ +/dts-v1/; + +/include/ "skeleton.dtsi" + +/ { + model = "Qualcomm MSM8960 CDP"; + compatible = "qcom,msm8960-cdp", "qcom,msm8960"; + interrupt-parent = <&intc>; + + intc: interrupt-controller@2000000 { + compatible = "qcom,msm-qgic2"; + interrupt-controller; + #interrupt-cells = <3>; + reg = < 0x02000000 0x1000 >, + < 0x02002000 0x1000 >; + }; + + timer@200a004 { + compatible = "qcom,msm-gpt", "qcom,msm-timer"; + interrupts = <1 2 0x301>; + reg = <0x0200a004 0x10>; + clock-frequency = <32768>; + cpu-offset = <0x80000>; + }; + + timer@200a024 { + compatible = "qcom,msm-dgt", "qcom,msm-timer"; + interrupts = <1 1 0x301>; + reg = <0x0200a024 0x10>, + <0x0200a034 0x4>; + clock-frequency = <6750000>; + cpu-offset = <0x80000>; + }; + + serial@19c400000 { + compatible = "qcom,msm-hsuart", "qcom,msm-uart"; + reg = <0x16440000 0x1000>, + <0x16400000 0x1000>; + interrupts = <0 154 0x0>; + }; +}; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts index 25b50b759dec6e4246869b55fc2b329f30de0b68..77b84e17c477a838eff092f2368c9b678d9447e0 100644 --- a/arch/arm/boot/dts/omap2420-h4.dts +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -7,7 +7,7 @@ */ /dts-v1/; -/include/ "omap2.dtsi" +/include/ "omap2420.dtsi" / { model = "TI OMAP2420 H4 board"; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..bfd76b4a0ddc95cc1c4d8d381c2420530dfd4a36 --- /dev/null +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -0,0 +1,48 @@ +/* + * Device Tree Source for OMAP2420 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap2.dtsi" + +/ { + compatible = "ti,omap2420", "ti,omap2"; + + ocp { + omap2420_pmx: pinmux@48000030 { + compatible = "ti,omap2420-padconf", "pinctrl-single"; + reg = <0x48000030 0x0113>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <8>; + pinctrl-single,function-mask = <0x3f>; + }; + + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap2420-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <59>, /* TX interrupt */ + <60>; /* RX interrupt */ + interrupt-names = "tx", "rx"; + interrupt-parent = <&intc>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@48076000 { + compatible = "ti,omap2420-mcbsp"; + reg = <0x48076000 0xff>; + reg-names = "mpu"; + interrupts = <62>, /* TX interrupt */ + <63>; /* RX interrupt */ + interrupt-names = "tx", "rx"; + interrupt-parent = <&intc>; + ti,hwmods = "mcbsp2"; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..4565d9750f4d82198646260c91d2fb497e6eb597 --- /dev/null +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -0,0 +1,92 @@ +/* + * Device Tree Source for OMAP243x SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap2.dtsi" + +/ { + compatible = "ti,omap2430", "ti,omap2"; + + ocp { + omap2430_pmx: pinmux@49002030 { + compatible = "ti,omap2430-padconf", "pinctrl-single"; + reg = <0x49002030 0x0154>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <8>; + pinctrl-single,function-mask = <0x3f>; + }; + + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <64>, /* OCP compliant interrupt */ + <59>, /* TX interrupt */ + <60>, /* RX interrupt */ + <61>; /* RX overflow interrupt */ + interrupt-names = "common", "tx", "rx", "rx_overflow"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@48076000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48076000 0xff>; + reg-names = "mpu"; + interrupts = <16>, /* OCP compliant interrupt */ + <62>, /* TX interrupt */ + <63>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@4808c000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x4808c000 0xff>; + reg-names = "mpu"; + interrupts = <17>, /* OCP compliant interrupt */ + <89>, /* TX interrupt */ + <90>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@4808e000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x4808e000 0xff>; + reg-names = "mpu"; + interrupts = <18>, /* OCP compliant interrupt */ + <54>, /* TX interrupt */ + <55>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + + mcbsp5: mcbsp@48096000 { + compatible = "ti,omap2430-mcbsp"; + reg = <0x48096000 0xff>; + reg-names = "mpu"; + interrupts = <19>, /* OCP compliant interrupt */ + <81>, /* TX interrupt */ + <82>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp5"; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts similarity index 52% rename from arch/arm/boot/dts/omap3-beagle.dts rename to arch/arm/boot/dts/omap3-beagle-xm.dts index cdcb98c7e0753b055c3388bd5f170950ba2964a2..c38cf76df81f2eaf3a3dfd9e1a8d3910f84f2067 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -7,16 +7,44 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap36xx.dtsi" / { - model = "TI OMAP3 BeagleBoard"; - compatible = "ti,omap3-beagle", "ti,omap3"; + model = "TI OMAP3 BeagleBoard xM"; + compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3"; memory { device_type = "memory"; reg = <0x80000000 0x20000000>; /* 512 MB */ }; + + leds { + compatible = "gpio-leds"; + pmu_stat { + label = "beagleboard::pmu_stat"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + }; + + heartbeat { + label = "beagleboard::usr0"; + gpios = <&gpio5 22 0>; /* 150 -> D6 LED */ + linux,default-trigger = "heartbeat"; + }; + + mmc { + label = "beagleboard::usr1"; + gpios = <&gpio5 21 0>; /* 149 -> D7 LED */ + linux,default-trigger = "mmc0"; + }; + }; + + sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; + }; }; &i2c1 { @@ -27,11 +55,17 @@ interrupts = <7>; /* SYS_NIRQ cascaded to intc */ interrupt-parent = <&intc>; - vsim: regulator@10 { + vsim: regulator-vsim { compatible = "ti,twl4030-vsim"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3000000>; }; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + codec { + }; + }; }; }; @@ -67,3 +101,15 @@ &mmc3 { status = "disabled"; }; + +&twl_gpio { + ti,use-leds; + /* pullups: BIT(1) */ + ti,pullups = <0x000002>; + /* + * pulldowns: + * BIT(2), BIT(6), BIT(7), BIT(8), BIT(13) + * BIT(15), BIT(16), BIT(17) + */ + ti,pulldowns = <0x03a1c4>; +}; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index f349ee9182ce6b12390f74718c9a978b84acd817..e8ba1c247a39bf28622276e07a75bf6137baf463 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -17,6 +17,15 @@ device_type = "memory"; reg = <0x80000000 0x10000000>; /* 256 MB */ }; + + leds { + compatible = "gpio-leds"; + ledb { + label = "omap3evm::ledb"; + gpios = <&twl_gpio 19 0>; /* LEDB */ + linux,default-trigger = "default-on"; + }; + }; }; &i2c1 { @@ -46,3 +55,7 @@ reg = <0x5c>; }; }; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..89808ce016734dd8436e75ae5dad38523ce56671 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -0,0 +1,57 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * The Gumstix Overo must be combined with an expansion board. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + leds { + compatible = "gpio-leds"; + overo { + label = "overo:blue:COM"; + gpios = <&twl_gpio 19 0>; + linux,default-trigger = "mmc0"; + }; + }; +}; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +/* i2c2 pins are used for gpio */ +&i2c2 { + status = "disabled"; +}; + +/* on board microSD slot */ +&mmc1 { + vmmc-supply = <&vmmc1>; + bus-width = <4>; +}; + +/* optional on board WiFi */ +&mmc2 { + bus-width = <4>; +}; + +&twl_gpio { + ti,use-leds; +}; diff --git a/arch/arm/boot/dts/omap3-tobi.dts b/arch/arm/boot/dts/omap3-tobi.dts new file mode 100644 index 0000000000000000000000000000000000000000..a13d12de77ffe72bc2f41b53e5e41d813657f36a --- /dev/null +++ b/arch/arm/boot/dts/omap3-tobi.dts @@ -0,0 +1,35 @@ +/* + * Copyright (C) 2012 Florian Vaussard, EPFL Mobots group + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Tobi expansion board is manufactured by Gumstix Inc. + */ + +/include/ "omap3-overo.dtsi" + +/ { + model = "TI OMAP3 Gumstix Overo on Tobi"; + compatible = "ti,omap3-tobi", "ti,omap3-overo", "ti,omap3"; + + leds { + compatible = "gpio-leds"; + heartbeat { + label = "overo:red:gpio21"; + gpios = <&gpio1 21 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&i2c3 { + clock-frequency = <100000>; +}; + +&mmc3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 810947198208c1fc8b476522b873ccb4136d4e6e..f38ea8771b44fb1b1ffe71830e74bed6d628ef66 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -17,7 +17,6 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; - serial3 = &uart4; }; cpus { @@ -69,6 +68,24 @@ reg = <0x48200000 0x1000>; }; + omap3_pmx_core: pinmux@48002030 { + compatible = "ti,omap3-padconf", "pinctrl-single"; + reg = <0x48002030 0x05cc>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + + omap3_pmx_wkup: pinmux@0x48002a58 { + compatible = "ti,omap3-padconf", "pinctrl-single"; + reg = <0x48002a58 0x5c>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + gpio1: gpio@48310000 { compatible = "ti,omap3-gpio"; ti,hwmods = "gpio1"; @@ -141,12 +158,6 @@ clock-frequency = <48000000>; }; - uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; - i2c1: i2c@48070000 { compatible = "ti,omap3-i2c"; #address-cells = <1>; @@ -220,5 +231,74 @@ compatible = "ti,omap3-wdt"; ti,hwmods = "wd_timer2"; }; + + mcbsp1: mcbsp@48074000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x48074000 0xff>; + reg-names = "mpu"; + interrupts = <16>, /* OCP compliant interrupt */ + <59>, /* TX interrupt */ + <60>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@49022000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49022000 0xff>, + <0x49028000 0xff>; + reg-names = "mpu", "sidetone"; + interrupts = <17>, /* OCP compliant interrupt */ + <62>, /* TX interrupt */ + <63>, /* RX interrupt */ + <4>; /* Sidetone */ + interrupt-names = "common", "tx", "rx", "sidetone"; + interrupt-parent = <&intc>; + ti,buffer-size = <1280>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@49024000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49024000 0xff>, + <0x4902a000 0xff>; + reg-names = "mpu", "sidetone"; + interrupts = <22>, /* OCP compliant interrupt */ + <89>, /* TX interrupt */ + <90>, /* RX interrupt */ + <5>; /* Sidetone */ + interrupt-names = "common", "tx", "rx", "sidetone"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@49026000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49026000 0xff>; + reg-names = "mpu"; + interrupts = <23>, /* OCP compliant interrupt */ + <54>, /* TX interrupt */ + <55>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + + mcbsp5: mcbsp@48096000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x48096000 0xff>; + reg-names = "mpu"; + interrupts = <27>, /* OCP compliant interrupt */ + <81>, /* TX interrupt */ + <82>; /* RX interrupt */ + interrupt-names = "common", "tx", "rx"; + interrupt-parent = <&intc>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp5"; + }; }; }; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..96bf0287cb9f92028b14b4f7e2c093d8fac57d5e --- /dev/null +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -0,0 +1,25 @@ +/* + * Device Tree Source for OMAP3 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap3.dtsi" + +/ { + aliases { + serial3 = &uart4; + }; + + ocp { + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 9880c12877b3f5347ef4d5c84cdfadeb028a67d1..20b966ee1bb3cfd7addfbb4d07fb0391bc41dc42 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap4.dtsi" +/include/ "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 PandaBoard"; @@ -126,3 +127,13 @@ ti,non-removable; bus-width = <4>; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 72216e932fc0c7c8d5632a0df5173d7bfe05bbe8..94a23b39033ddcd9458b631ae894926ca420b422 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -8,6 +8,7 @@ /dts-v1/; /include/ "omap4.dtsi" +/include/ "elpida_ecb240abacn.dtsi" / { model = "TI OMAP4 SDP board"; @@ -18,7 +19,7 @@ reg = <0x80000000 0x40000000>; /* 1 GB */ }; - vdd_eth: fixedregulator@0 { + vdd_eth: fixedregulator-vdd-eth { compatible = "regulator-fixed"; regulator-name = "VDD_ETH"; regulator-min-microvolt = <3300000>; @@ -28,7 +29,7 @@ regulator-boot-on; }; - vbat: fixedregulator@2 { + vbat: fixedregulator-vbat { compatible = "regulator-fixed"; regulator-name = "VBAT"; regulator-min-microvolt = <3750000>; @@ -115,6 +116,33 @@ }; }; +&omap4_pmx_core { + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */ + 0xda 0 /* uart2_rts.uart2_rts OUTPUT | MODE0 */ + 0xdc 0x118 /* uart2_rx.uart2_rx INPUT_PULLUP | MODE0 */ + 0xde 0 /* uart2_tx.uart2_tx OUTPUT | MODE0 */ + >; + }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + 0x100 0x118 /* uart3_cts_rctx.uart3_cts_rctx INPUT_PULLUP | MODE0 */ + 0x102 0 /* uart3_rts_sd.uart3_rts_sd OUTPUT | MODE0 */ + 0x104 0x100 /* uart3_rx_irrx.uart3_rx_irrx INPUT | MODE0 */ + 0x106 0 /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + >; + }; + + uart4_pins: pinmux_uart4_pins { + pinctrl-single,pins = < + 0x11c 0x100 /* uart4_rx.uart4_rx INPUT | MODE0 */ + 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */ + >; + }; +}; + &i2c1 { clock-frequency = <400000>; @@ -226,3 +254,98 @@ bus-width = <4>; ti,non-removable; }; + +&emif1 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&emif2 { + cs1-used; + device-handle = <&elpida_ECB240ABACN>; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <0x00000012 /* KEY_E */ + 0x00010013 /* KEY_R */ + 0x00020014 /* KEY_T */ + 0x00030066 /* KEY_HOME */ + 0x0004003f /* KEY_F5 */ + 0x000500f0 /* KEY_UNKNOWN */ + 0x00060017 /* KEY_I */ + 0x0007002a /* KEY_LEFTSHIFT */ + 0x01000020 /* KEY_D*/ + 0x01010021 /* KEY_F */ + 0x01020022 /* KEY_G */ + 0x010300e7 /* KEY_SEND */ + 0x01040040 /* KEY_F6 */ + 0x010500f0 /* KEY_UNKNOWN */ + 0x01060025 /* KEY_K */ + 0x0107001c /* KEY_ENTER */ + 0x0200002d /* KEY_X */ + 0x0201002e /* KEY_C */ + 0x0202002f /* KEY_V */ + 0x0203006b /* KEY_END */ + 0x02040041 /* KEY_F7 */ + 0x020500f0 /* KEY_UNKNOWN */ + 0x02060034 /* KEY_DOT */ + 0x0207003a /* KEY_CAPSLOCK */ + 0x0300002c /* KEY_Z */ + 0x0301004e /* KEY_KPLUS */ + 0x03020030 /* KEY_B */ + 0x0303003b /* KEY_F1 */ + 0x03040042 /* KEY_F8 */ + 0x030500f0 /* KEY_UNKNOWN */ + 0x03060018 /* KEY_O */ + 0x03070039 /* KEY_SPACE */ + 0x04000011 /* KEY_W */ + 0x04010015 /* KEY_Y */ + 0x04020016 /* KEY_U */ + 0x0403003c /* KEY_F2 */ + 0x04040073 /* KEY_VOLUMEUP */ + 0x040500f0 /* KEY_UNKNOWN */ + 0x04060026 /* KEY_L */ + 0x04070069 /* KEY_LEFT */ + 0x0500001f /* KEY_S */ + 0x05010023 /* KEY_H */ + 0x05020024 /* KEY_J */ + 0x0503003d /* KEY_F3 */ + 0x05040043 /* KEY_F9 */ + 0x05050072 /* KEY_VOLUMEDOWN */ + 0x05060032 /* KEY_M */ + 0x0507006a /* KEY_RIGHT */ + 0x06000010 /* KEY_Q */ + 0x0601001e /* KEY_A */ + 0x06020031 /* KEY_N */ + 0x0603009e /* KEY_BACK */ + 0x0604000e /* KEY_BACKSPACE */ + 0x060500f0 /* KEY_UNKNOWN */ + 0x06060019 /* KEY_P */ + 0x06070067 /* KEY_UP */ + 0x07000094 /* KEY_PROG1 */ + 0x07010095 /* KEY_PROG2 */ + 0x070200ca /* KEY_PROG3 */ + 0x070300cb /* KEY_PROG4 */ + 0x0704003e /* KEY_F4 */ + 0x070500f0 /* KEY_UNKNOWN */ + 0x07060160 /* KEY_OK */ + 0x0707006c>; /* KEY_DOWN */ + linux,input-no-autorepeat; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&uart4_pins>; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 04cbbcb6ff91796ac78dfd2e15035ad32a9c89e1..3883f94fdbd0ed29430ec35815689ae4ff692cc5 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -30,12 +30,35 @@ cpus { cpu@0 { compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; }; cpu@1 { compatible = "arm,cortex-a9"; + next-level-cache = <&L2>; }; }; + gic: interrupt-controller@48241000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48241000 0x1000>, + <0x48240100 0x0100>; + }; + + L2: l2-cache-controller@48242000 { + compatible = "arm,pl310-cache"; + reg = <0x48242000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + local-timer@0x48240600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x48240600 0x20>; + interrupts = <1 13 0x304>; + }; + /* * The soc node represents the soc top level view. It is uses for IPs * that are not memory mapped in the MPU view or for the MPU itself. @@ -61,30 +84,6 @@ /* * XXX: Use a flat representation of the OMAP4 interconnect. * The real OMAP interconnect network is quite complex. - * - * MPU -+-- MPU_PRIVATE - GIC, L2 - * | - * +----------------+----------+ - * | | | - * + +- EMIF - DDR | - * | | | - * | + +--------+ - * | | | - * | +- L4_ABE - AESS, MCBSP, TIMERs... - * | | - * +- L3_MAIN --+- L4_CORE - IPs... - * | - * +- L4_PER - IPs... - * | - * +- L4_CFG -+- L4_WKUP - IPs... - * | | - * | +- IPs... - * +- IPU ----+ - * | | - * +- DSP ----+ - * | | - * +- DSS ----+ - * * Since that will not bring real advantage to represent that in DT for * the moment, just use a fake OCP bus entry to represent the whole bus * hierarchy. @@ -96,16 +95,27 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; - gic: interrupt-controller@48241000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x48241000 0x1000>, - <0x48240100 0x0100>; + omap4_pmx_core: pinmux@4a100040 { + compatible = "ti,omap4-padconf", "pinctrl-single"; + reg = <0x4a100040 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + omap4_pmx_wkup: pinmux@4a31e040 { + compatible = "ti,omap4-padconf", "pinctrl-single"; + reg = <0x4a31e040 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; }; gpio1: gpio@4a310000 { compatible = "ti,omap4-gpio"; + reg = <0x4a310000 0x200>; + interrupts = <0 29 0x4>; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -115,6 +125,8 @@ gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; + reg = <0x48055000 0x200>; + interrupts = <0 30 0x4>; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -124,6 +136,8 @@ gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; + reg = <0x48057000 0x200>; + interrupts = <0 31 0x4>; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -133,6 +147,8 @@ gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; + reg = <0x48059000 0x200>; + interrupts = <0 32 0x4>; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -142,6 +158,8 @@ gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; + reg = <0x4805b000 0x200>; + interrupts = <0 33 0x4>; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -151,6 +169,8 @@ gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; + reg = <0x4805d000 0x200>; + interrupts = <0 34 0x4>; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -160,30 +180,40 @@ uart1: serial@4806a000 { compatible = "ti,omap4-uart"; + reg = <0x4806a000 0x100>; + interrupts = <0 72 0x4>; ti,hwmods = "uart1"; clock-frequency = <48000000>; }; uart2: serial@4806c000 { compatible = "ti,omap4-uart"; + reg = <0x4806c000 0x100>; + interrupts = <0 73 0x4>; ti,hwmods = "uart2"; clock-frequency = <48000000>; }; uart3: serial@48020000 { compatible = "ti,omap4-uart"; + reg = <0x48020000 0x100>; + interrupts = <0 74 0x4>; ti,hwmods = "uart3"; clock-frequency = <48000000>; }; uart4: serial@4806e000 { compatible = "ti,omap4-uart"; + reg = <0x4806e000 0x100>; + interrupts = <0 70 0x4>; ti,hwmods = "uart4"; clock-frequency = <48000000>; }; i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; + reg = <0x48070000 0x100>; + interrupts = <0 56 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -191,6 +221,8 @@ i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; + reg = <0x48072000 0x100>; + interrupts = <0 57 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -198,6 +230,8 @@ i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; + reg = <0x48060000 0x100>; + interrupts = <0 61 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -205,6 +239,8 @@ i2c4: i2c@48350000 { compatible = "ti,omap4-i2c"; + reg = <0x48350000 0x100>; + interrupts = <0 62 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -212,6 +248,8 @@ mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; + reg = <0x48098000 0x200>; + interrupts = <0 65 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -220,6 +258,8 @@ mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; + reg = <0x4809a000 0x200>; + interrupts = <0 66 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -228,6 +268,8 @@ mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; + reg = <0x480b8000 0x200>; + interrupts = <0 91 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -236,6 +278,8 @@ mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; + reg = <0x480ba000 0x200>; + interrupts = <0 48 0x4>; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; @@ -244,6 +288,8 @@ mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; + reg = <0x4809c000 0x400>; + interrupts = <0 83 0x4>; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -251,30 +297,40 @@ mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480b4000 0x400>; + interrupts = <0 86 0x4>; ti,hwmods = "mmc2"; ti,needs-special-reset; }; mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480ad000 0x400>; + interrupts = <0 94 0x4>; ti,hwmods = "mmc3"; ti,needs-special-reset; }; mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d1000 0x400>; + interrupts = <0 96 0x4>; ti,hwmods = "mmc4"; ti,needs-special-reset; }; mmc5: mmc@480d5000 { compatible = "ti,omap4-hsmmc"; + reg = <0x480d5000 0x400>; + interrupts = <0 59 0x4>; ti,hwmods = "mmc5"; ti,needs-special-reset; }; wdt2: wdt@4a314000 { compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + reg = <0x4a314000 0x80>; + interrupts = <0 80 0x4>; ti,hwmods = "wd_timer2"; }; @@ -282,6 +338,7 @@ compatible = "ti,omap4-mcpdm"; reg = <0x40132000 0x7f>, /* MPU private access */ <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; interrupts = <0 112 0x4>; interrupt-parent = <&gic>; ti,hwmods = "mcpdm"; @@ -291,9 +348,95 @@ compatible = "ti,omap4-dmic"; reg = <0x4012e000 0x7f>, /* MPU private access */ <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; interrupts = <0 114 0x4>; interrupt-parent = <&gic>; ti,hwmods = "dmic"; }; + + mcbsp1: mcbsp@40122000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40122000 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 17 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@40124000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40124000 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 22 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@40126000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40126000 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 23 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; + + mcbsp4: mcbsp@48096000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x48096000 0xff>; /* L4 Interconnect */ + reg-names = "mpu"; + interrupts = <0 16 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp4"; + }; + + keypad: keypad@4a31c000 { + compatible = "ti,omap4-keypad"; + reg = <0x4a31c000 0x80>; + interrupts = <0 120 0x4>; + reg-names = "mpu"; + ti,hwmods = "kbd"; + }; + + emif1: emif@4c000000 { + compatible = "ti,emif-4d"; + reg = <0x4c000000 0x100>; + interrupts = <0 110 0x4>; + ti,hwmods = "emif1"; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + emif2: emif@4d000000 { + compatible = "ti,emif-4d"; + reg = <0x4d000000 0x100>; + interrupts = <0 111 0x4>; + ti,hwmods = "emif2"; + phy-type = <1>; + hw-caps-read-idle-ctrl; + hw-caps-ll-interface; + hw-caps-temp-alert; + }; + + ocp2scp { + compatible = "ti,omap-ocp2scp"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "ocp2scp_usb_phy"; + }; }; }; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 200c39ad1c8225508f369dbdecfb3f75b18395d1..9c41a3f311aab25bd5e098d15c8f4cb5d5ee3695 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -17,4 +17,68 @@ device_type = "memory"; reg = <0x80000000 0x40000000>; /* 1 GB */ }; + + vmmcsd_fixed: fixedregulator-mmcsd { + compatible = "regulator-fixed"; + regulator-name = "vmmcsd_fixed"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + +}; + +&mmc1 { + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <4>; +}; + +&mmc2 { + vmmc-supply = <&vmmcsd_fixed>; + bus-width = <8>; + ti,non-removable; +}; + +&mmc3 { + bus-width = <4>; + ti,non-removable; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + status = "disabled"; +}; + +&i2c2 { + clock-frequency = <400000>; + + /* Pressure Sensor */ + bmp085@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; + + /* Temperature Sensor */ + tmp102@48{ + compatible = "ti,tmp102"; + reg = <0x48>; + }; +}; + +&keypad { + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = <0x02020073 /* VOLUP */ + 0x02030072 /* VOLDOWM */ + 0x020400e7 /* SEND */ + 0x02050066 /* HOME */ + 0x0206006b /* END */ + 0x020700d9>; /* SEARCH */ + linux,input-no-autorepeat; }; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 57e527083746ed93a69624c0009af7ad548bca67..5db33f481a331c29fb344ab304d0d6e0030c2686 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -33,9 +33,21 @@ cpus { cpu@0 { compatible = "arm,cortex-a15"; + timer { + compatible = "arm,armv7-timer"; + /* 14th PPI IRQ, active low level-sensitive */ + interrupts = <1 14 0x308>; + clock-frequency = <6144000>; + }; }; cpu@1 { compatible = "arm,cortex-a15"; + timer { + compatible = "arm,armv7-timer"; + /* 14th PPI IRQ, active low level-sensitive */ + interrupts = <1 14 0x308>; + clock-frequency = <6144000>; + }; }; }; @@ -145,6 +157,41 @@ #interrupt-cells = <1>; }; + i2c1: i2c@48070000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + }; + + i2c2: i2c@48072000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + }; + + i2c3: i2c@48060000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + }; + + i2c4: i2c@4807A000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c4"; + }; + + i2c5: i2c@4807C000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c5"; + }; + uart1: serial@4806a000 { compatible = "ti,omap4-uart"; ti,hwmods = "uart1"; @@ -180,5 +227,97 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; }; + + mmc1: mmc@4809c000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc1"; + ti,dual-volt; + ti,needs-special-reset; + }; + + mmc2: mmc@480b4000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc2"; + ti,needs-special-reset; + }; + + mmc3: mmc@480ad000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc3"; + ti,needs-special-reset; + }; + + mmc4: mmc@480d1000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc4"; + ti,needs-special-reset; + }; + + mmc5: mmc@480d5000 { + compatible = "ti,omap4-hsmmc"; + ti,hwmods = "mmc5"; + ti,needs-special-reset; + }; + + keypad: keypad@4ae1c000 { + compatible = "ti,omap4-keypad"; + ti,hwmods = "kbd"; + }; + + mcpdm: mcpdm@40132000 { + compatible = "ti,omap4-mcpdm"; + reg = <0x40132000 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 112 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "mcpdm"; + }; + + dmic: dmic@4012e000 { + compatible = "ti,omap4-dmic"; + reg = <0x4012e000 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 114 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "dmic"; + }; + + mcbsp1: mcbsp@40122000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40122000 0xff>, /* MPU private access */ + <0x49022000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 17 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp1"; + }; + + mcbsp2: mcbsp@40124000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40124000 0xff>, /* MPU private access */ + <0x49024000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 22 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp2"; + }; + + mcbsp3: mcbsp@40126000 { + compatible = "ti,omap4-mcbsp"; + reg = <0x40126000 0xff>, /* MPU private access */ + <0x49026000 0xff>; /* L3 Interconnect */ + reg-names = "mpu", "dma"; + interrupts = <0 23 0x4>; + interrupt-names = "common"; + interrupt-parent = <&gic>; + ti,buffer-size = <128>; + ti,hwmods = "mcbsp3"; + }; }; }; diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts index 802ec5b2fd00d0d40977624a9ae382b55e416b76..90fdbd77f2740f36c09a3daeaa359625107e8fe8 100644 --- a/arch/arm/boot/dts/phy3250.dts +++ b/arch/arm/boot/dts/phy3250.dts @@ -135,13 +135,11 @@ ssp0: ssp@20084000 { #address-cells = <1>; #size-cells = <0>; - pl022,num-chipselects = <1>; + num-cs = <1>; cs-gpios = <&gpio 3 5 0>; eeprom: at25@0 { - pl022,hierarchy = <0>; pl022,interface = <0>; - pl022,slave-tx-disable = <0>; pl022,com-mode = <0>; pl022,rx-level-trig = <1>; pl022,tx-level-trig = <1>; @@ -191,16 +189,14 @@ leds { compatible = "gpio-leds"; - led0 { - gpios = <&gpio 5 1 1>; /* GPO_P3 1, GPIO 80, active low */ - linux,default-trigger = "heartbeat"; + led0 { /* red */ + gpios = <&gpio 5 1 0>; /* GPO_P3 1, GPIO 80, active high */ default-state = "off"; }; - led1 { - gpios = <&gpio 5 14 1>; /* GPO_P3 14, GPIO 93, active low */ - linux,default-trigger = "timer"; - default-state = "off"; + led1 { /* green */ + gpios = <&gpio 5 14 0>; /* GPO_P3 14, GPIO 93, active high */ + linux,default-trigger = "heartbeat"; }; }; }; diff --git a/arch/arm/boot/dts/prima2-cb.dts b/arch/arm/boot/dts/prima2-cb.dts deleted file mode 100644 index 34ae3a64ba255a871791e48d7d6cf9edc723e0e2..0000000000000000000000000000000000000000 --- a/arch/arm/boot/dts/prima2-cb.dts +++ /dev/null @@ -1,424 +0,0 @@ -/dts-v1/; -/ { - model = "SiRF Prima2 eVB"; - compatible = "sirf,prima2-cb", "sirf,prima2"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - - memory { - reg = <0x00000000 0x20000000>; - }; - - chosen { - bootargs = "mem=512M real_root=/dev/mmcblk0p2 console=ttyS0 panel=1 bootsplash=true bpp=16 androidboot.console=ttyS1"; - linux,stdout-path = &uart1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - reg = <0x0>; - d-cache-line-size = <32>; - i-cache-line-size = <32>; - d-cache-size = <32768>; - i-cache-size = <32768>; - /* from bootloader */ - timebase-frequency = <0>; - bus-frequency = <0>; - clock-frequency = <0>; - }; - }; - - axi { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x40000000 0x40000000 0x80000000>; - - l2-cache-controller@80040000 { - compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache"; - reg = <0x80040000 0x1000>; - interrupts = <59>; - arm,tag-latency = <1 1 1>; - arm,data-latency = <1 1 1>; - arm,filter-ranges = <0 0x40000000>; - }; - - intc: interrupt-controller@80020000 { - #interrupt-cells = <1>; - interrupt-controller; - compatible = "sirf,prima2-intc"; - reg = <0x80020000 0x1000>; - }; - - sys-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x88000000 0x88000000 0x40000>; - - clock-controller@88000000 { - compatible = "sirf,prima2-clkc"; - reg = <0x88000000 0x1000>; - interrupts = <3>; - }; - - reset-controller@88010000 { - compatible = "sirf,prima2-rstc"; - reg = <0x88010000 0x1000>; - }; - - rsc-controller@88020000 { - compatible = "sirf,prima2-rsc"; - reg = <0x88020000 0x1000>; - }; - }; - - mem-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x90000000 0x90000000 0x10000>; - - memory-controller@90000000 { - compatible = "sirf,prima2-memc"; - reg = <0x90000000 0x10000>; - interrupts = <27>; - }; - }; - - disp-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x90010000 0x90010000 0x30000>; - - display@90010000 { - compatible = "sirf,prima2-lcd"; - reg = <0x90010000 0x20000>; - interrupts = <30>; - }; - - vpp@90020000 { - compatible = "sirf,prima2-vpp"; - reg = <0x90020000 0x10000>; - interrupts = <31>; - }; - }; - - graphics-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x98000000 0x98000000 0x8000000>; - - graphics@98000000 { - compatible = "powervr,sgx531"; - reg = <0x98000000 0x8000000>; - interrupts = <6>; - }; - }; - - multimedia-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xa0000000 0xa0000000 0x8000000>; - - multimedia@a0000000 { - compatible = "sirf,prima2-video-codec"; - reg = <0xa0000000 0x8000000>; - interrupts = <5>; - }; - }; - - dsp-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xa8000000 0xa8000000 0x2000000>; - - dspif@a8000000 { - compatible = "sirf,prima2-dspif"; - reg = <0xa8000000 0x10000>; - interrupts = <9>; - }; - - gps@a8010000 { - compatible = "sirf,prima2-gps"; - reg = <0xa8010000 0x10000>; - interrupts = <7>; - }; - - dsp@a9000000 { - compatible = "sirf,prima2-dsp"; - reg = <0xa9000000 0x1000000>; - interrupts = <8>; - }; - }; - - peri-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xb0000000 0xb0000000 0x180000>; - - timer@b0020000 { - compatible = "sirf,prima2-tick"; - reg = <0xb0020000 0x1000>; - interrupts = <0>; - }; - - nand@b0030000 { - compatible = "sirf,prima2-nand"; - reg = <0xb0030000 0x10000>; - interrupts = <41>; - }; - - audio@b0040000 { - compatible = "sirf,prima2-audio"; - reg = <0xb0040000 0x10000>; - interrupts = <35>; - }; - - uart0: uart@b0050000 { - cell-index = <0>; - compatible = "sirf,prima2-uart"; - reg = <0xb0050000 0x10000>; - interrupts = <17>; - }; - - uart1: uart@b0060000 { - cell-index = <1>; - compatible = "sirf,prima2-uart"; - reg = <0xb0060000 0x10000>; - interrupts = <18>; - }; - - uart2: uart@b0070000 { - cell-index = <2>; - compatible = "sirf,prima2-uart"; - reg = <0xb0070000 0x10000>; - interrupts = <19>; - }; - - usp0: usp@b0080000 { - cell-index = <0>; - compatible = "sirf,prima2-usp"; - reg = <0xb0080000 0x10000>; - interrupts = <20>; - }; - - usp1: usp@b0090000 { - cell-index = <1>; - compatible = "sirf,prima2-usp"; - reg = <0xb0090000 0x10000>; - interrupts = <21>; - }; - - usp2: usp@b00a0000 { - cell-index = <2>; - compatible = "sirf,prima2-usp"; - reg = <0xb00a0000 0x10000>; - interrupts = <22>; - }; - - dmac0: dma-controller@b00b0000 { - cell-index = <0>; - compatible = "sirf,prima2-dmac"; - reg = <0xb00b0000 0x10000>; - interrupts = <12>; - }; - - dmac1: dma-controller@b0160000 { - cell-index = <1>; - compatible = "sirf,prima2-dmac"; - reg = <0xb0160000 0x10000>; - interrupts = <13>; - }; - - vip@b00C0000 { - compatible = "sirf,prima2-vip"; - reg = <0xb00C0000 0x10000>; - }; - - spi0: spi@b00d0000 { - cell-index = <0>; - compatible = "sirf,prima2-spi"; - reg = <0xb00d0000 0x10000>; - interrupts = <15>; - }; - - spi1: spi@b0170000 { - cell-index = <1>; - compatible = "sirf,prima2-spi"; - reg = <0xb0170000 0x10000>; - interrupts = <16>; - }; - - i2c0: i2c@b00e0000 { - cell-index = <0>; - compatible = "sirf,prima2-i2c"; - reg = <0xb00e0000 0x10000>; - interrupts = <24>; - }; - - i2c1: i2c@b00f0000 { - cell-index = <1>; - compatible = "sirf,prima2-i2c"; - reg = <0xb00f0000 0x10000>; - interrupts = <25>; - }; - - tsc@b0110000 { - compatible = "sirf,prima2-tsc"; - reg = <0xb0110000 0x10000>; - interrupts = <33>; - }; - - gpio: gpio-controller@b0120000 { - #gpio-cells = <2>; - #interrupt-cells = <2>; - compatible = "sirf,prima2-gpio-pinmux"; - reg = <0xb0120000 0x10000>; - gpio-controller; - interrupt-controller; - }; - - pwm@b0130000 { - compatible = "sirf,prima2-pwm"; - reg = <0xb0130000 0x10000>; - }; - - efusesys@b0140000 { - compatible = "sirf,prima2-efuse"; - reg = <0xb0140000 0x10000>; - }; - - pulsec@b0150000 { - compatible = "sirf,prima2-pulsec"; - reg = <0xb0150000 0x10000>; - interrupts = <48>; - }; - - pci-iobg { - compatible = "sirf,prima2-pciiobg", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x56000000 0x56000000 0x1b00000>; - - sd0: sdhci@56000000 { - cell-index = <0>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56000000 0x100000>; - interrupts = <38>; - }; - - sd1: sdhci@56100000 { - cell-index = <1>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56100000 0x100000>; - interrupts = <38>; - }; - - sd2: sdhci@56200000 { - cell-index = <2>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56200000 0x100000>; - interrupts = <23>; - }; - - sd3: sdhci@56300000 { - cell-index = <3>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56300000 0x100000>; - interrupts = <23>; - }; - - sd4: sdhci@56400000 { - cell-index = <4>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56400000 0x100000>; - interrupts = <39>; - }; - - sd5: sdhci@56500000 { - cell-index = <5>; - compatible = "sirf,prima2-sdhc"; - reg = <0x56500000 0x100000>; - interrupts = <39>; - }; - - pci-copy@57900000 { - compatible = "sirf,prima2-pcicp"; - reg = <0x57900000 0x100000>; - interrupts = <40>; - }; - - rom-interface@57a00000 { - compatible = "sirf,prima2-romif"; - reg = <0x57a00000 0x100000>; - }; - }; - }; - - rtc-iobg { - compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x80030000 0x10000>; - - gpsrtc@1000 { - compatible = "sirf,prima2-gpsrtc"; - reg = <0x1000 0x1000>; - interrupts = <55 56 57>; - }; - - sysrtc@2000 { - compatible = "sirf,prima2-sysrtc"; - reg = <0x2000 0x1000>; - interrupts = <52 53 54>; - }; - - pwrc@3000 { - compatible = "sirf,prima2-pwrc"; - reg = <0x3000 0x1000>; - interrupts = <32>; - }; - }; - - uus-iobg { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0xb8000000 0xb8000000 0x40000>; - - usb0: usb@b00e0000 { - compatible = "chipidea,ci13611a-prima2"; - reg = <0xb8000000 0x10000>; - interrupts = <10>; - }; - - usb1: usb@b00f0000 { - compatible = "chipidea,ci13611a-prima2"; - reg = <0xb8010000 0x10000>; - interrupts = <11>; - }; - - sata@b00f0000 { - compatible = "synopsys,dwc-ahsata"; - reg = <0xb8020000 0x10000>; - interrupts = <37>; - }; - - security@b00f0000 { - compatible = "sirf,prima2-security"; - reg = <0xb8030000 0x10000>; - interrupts = <42>; - }; - }; - }; -}; diff --git a/arch/arm/boot/dts/prima2-evb.dts b/arch/arm/boot/dts/prima2-evb.dts new file mode 100644 index 0000000000000000000000000000000000000000..57286b4e7b87e78f850af1bcb6150ea680e56fd6 --- /dev/null +++ b/arch/arm/boot/dts/prima2-evb.dts @@ -0,0 +1,37 @@ +/* + * DTS file for CSR SiRFprimaII Evaluation Board + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "prima2.dtsi" + +/ { + model = "CSR SiRFprimaII Evaluation Board"; + compatible = "sirf,prima2", "sirf,prima2-cb"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + axi { + peri-iobg { + uart@b0060000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_a>; + }; + spi@b00d0000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins_a>; + }; + spi@b0170000 { + pinctrl-names = "default"; + pinctrl-0 = <&spi1_pins_a>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..055fca542120bec47b150430144145d9b9c2a46f --- /dev/null +++ b/arch/arm/boot/dts/prima2.dtsi @@ -0,0 +1,640 @@ +/* + * DTS file for CSR SiRFprimaII SoC + * + * Copyright (c) 2012 Cambridge Silicon Radio Limited, a CSR plc group company. + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" +/ { + compatible = "sirf,prima2"; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + reg = <0x0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <32768>; + i-cache-size = <32768>; + /* from bootloader */ + timebase-frequency = <0>; + bus-frequency = <0>; + clock-frequency = <0>; + }; + }; + + axi { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x40000000 0x40000000 0x80000000>; + + l2-cache-controller@80040000 { + compatible = "arm,pl310-cache", "sirf,prima2-pl310-cache"; + reg = <0x80040000 0x1000>; + interrupts = <59>; + arm,tag-latency = <1 1 1>; + arm,data-latency = <1 1 1>; + arm,filter-ranges = <0 0x40000000>; + }; + + intc: interrupt-controller@80020000 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "sirf,prima2-intc"; + reg = <0x80020000 0x1000>; + }; + + sys-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x88000000 0x88000000 0x40000>; + + clock-controller@88000000 { + compatible = "sirf,prima2-clkc"; + reg = <0x88000000 0x1000>; + interrupts = <3>; + }; + + reset-controller@88010000 { + compatible = "sirf,prima2-rstc"; + reg = <0x88010000 0x1000>; + }; + + rsc-controller@88020000 { + compatible = "sirf,prima2-rsc"; + reg = <0x88020000 0x1000>; + }; + }; + + mem-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x90000000 0x90000000 0x10000>; + + memory-controller@90000000 { + compatible = "sirf,prima2-memc"; + reg = <0x90000000 0x10000>; + interrupts = <27>; + }; + }; + + disp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x90010000 0x90010000 0x30000>; + + display@90010000 { + compatible = "sirf,prima2-lcd"; + reg = <0x90010000 0x20000>; + interrupts = <30>; + }; + + vpp@90020000 { + compatible = "sirf,prima2-vpp"; + reg = <0x90020000 0x10000>; + interrupts = <31>; + }; + }; + + graphics-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x98000000 0x98000000 0x8000000>; + + graphics@98000000 { + compatible = "powervr,sgx531"; + reg = <0x98000000 0x8000000>; + interrupts = <6>; + }; + }; + + multimedia-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xa0000000 0xa0000000 0x8000000>; + + multimedia@a0000000 { + compatible = "sirf,prima2-video-codec"; + reg = <0xa0000000 0x8000000>; + interrupts = <5>; + }; + }; + + dsp-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xa8000000 0xa8000000 0x2000000>; + + dspif@a8000000 { + compatible = "sirf,prima2-dspif"; + reg = <0xa8000000 0x10000>; + interrupts = <9>; + }; + + gps@a8010000 { + compatible = "sirf,prima2-gps"; + reg = <0xa8010000 0x10000>; + interrupts = <7>; + }; + + dsp@a9000000 { + compatible = "sirf,prima2-dsp"; + reg = <0xa9000000 0x1000000>; + interrupts = <8>; + }; + }; + + peri-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb0000000 0xb0000000 0x180000>; + + timer@b0020000 { + compatible = "sirf,prima2-tick"; + reg = <0xb0020000 0x1000>; + interrupts = <0>; + }; + + nand@b0030000 { + compatible = "sirf,prima2-nand"; + reg = <0xb0030000 0x10000>; + interrupts = <41>; + }; + + audio@b0040000 { + compatible = "sirf,prima2-audio"; + reg = <0xb0040000 0x10000>; + interrupts = <35>; + }; + + uart0: uart@b0050000 { + cell-index = <0>; + compatible = "sirf,prima2-uart"; + reg = <0xb0050000 0x10000>; + interrupts = <17>; + }; + + uart1: uart@b0060000 { + cell-index = <1>; + compatible = "sirf,prima2-uart"; + reg = <0xb0060000 0x10000>; + interrupts = <18>; + }; + + uart2: uart@b0070000 { + cell-index = <2>; + compatible = "sirf,prima2-uart"; + reg = <0xb0070000 0x10000>; + interrupts = <19>; + }; + + usp0: usp@b0080000 { + cell-index = <0>; + compatible = "sirf,prima2-usp"; + reg = <0xb0080000 0x10000>; + interrupts = <20>; + }; + + usp1: usp@b0090000 { + cell-index = <1>; + compatible = "sirf,prima2-usp"; + reg = <0xb0090000 0x10000>; + interrupts = <21>; + }; + + usp2: usp@b00a0000 { + cell-index = <2>; + compatible = "sirf,prima2-usp"; + reg = <0xb00a0000 0x10000>; + interrupts = <22>; + }; + + dmac0: dma-controller@b00b0000 { + cell-index = <0>; + compatible = "sirf,prima2-dmac"; + reg = <0xb00b0000 0x10000>; + interrupts = <12>; + }; + + dmac1: dma-controller@b0160000 { + cell-index = <1>; + compatible = "sirf,prima2-dmac"; + reg = <0xb0160000 0x10000>; + interrupts = <13>; + }; + + vip@b00C0000 { + compatible = "sirf,prima2-vip"; + reg = <0xb00C0000 0x10000>; + }; + + spi0: spi@b00d0000 { + cell-index = <0>; + compatible = "sirf,prima2-spi"; + reg = <0xb00d0000 0x10000>; + interrupts = <15>; + }; + + spi1: spi@b0170000 { + cell-index = <1>; + compatible = "sirf,prima2-spi"; + reg = <0xb0170000 0x10000>; + interrupts = <16>; + }; + + i2c0: i2c@b00e0000 { + cell-index = <0>; + compatible = "sirf,prima2-i2c"; + reg = <0xb00e0000 0x10000>; + interrupts = <24>; + }; + + i2c1: i2c@b00f0000 { + cell-index = <1>; + compatible = "sirf,prima2-i2c"; + reg = <0xb00f0000 0x10000>; + interrupts = <25>; + }; + + tsc@b0110000 { + compatible = "sirf,prima2-tsc"; + reg = <0xb0110000 0x10000>; + interrupts = <33>; + }; + + gpio: pinctrl@b0120000 { + #gpio-cells = <2>; + #interrupt-cells = <2>; + compatible = "sirf,prima2-pinctrl"; + reg = <0xb0120000 0x10000>; + interrupts = <43 44 45 46 47>; + gpio-controller; + interrupt-controller; + + lcd_16pins_a: lcd0@0 { + lcd { + sirf,pins = "lcd_16bitsgrp"; + sirf,function = "lcd_16bits"; + }; + }; + lcd_18pins_a: lcd0@1 { + lcd { + sirf,pins = "lcd_18bitsgrp"; + sirf,function = "lcd_18bits"; + }; + }; + lcd_24pins_a: lcd0@2 { + lcd { + sirf,pins = "lcd_24bitsgrp"; + sirf,function = "lcd_24bits"; + }; + }; + lcdrom_pins_a: lcdrom0@0 { + lcd { + sirf,pins = "lcdromgrp"; + sirf,function = "lcdrom"; + }; + }; + uart0_pins_a: uart0@0 { + uart { + sirf,pins = "uart0grp"; + sirf,function = "uart0"; + }; + }; + uart1_pins_a: uart1@0 { + uart { + sirf,pins = "uart1grp"; + sirf,function = "uart1"; + }; + }; + uart2_pins_a: uart2@0 { + uart { + sirf,pins = "uart2grp"; + sirf,function = "uart2"; + }; + }; + uart2_noflow_pins_a: uart2@1 { + uart { + sirf,pins = "uart2_nostreamctrlgrp"; + sirf,function = "uart2_nostreamctrl"; + }; + }; + spi0_pins_a: spi0@0 { + spi { + sirf,pins = "spi0grp"; + sirf,function = "spi0"; + }; + }; + spi1_pins_a: spi1@0 { + spi { + sirf,pins = "spi1grp"; + sirf,function = "spi1"; + }; + }; + i2c0_pins_a: i2c0@0 { + i2c { + sirf,pins = "i2c0grp"; + sirf,function = "i2c0"; + }; + }; + i2c1_pins_a: i2c1@0 { + i2c { + sirf,pins = "i2c1grp"; + sirf,function = "i2c1"; + }; + }; + pwm0_pins_a: pwm0@0 { + pwm { + sirf,pins = "pwm0grp"; + sirf,function = "pwm0"; + }; + }; + pwm1_pins_a: pwm1@0 { + pwm { + sirf,pins = "pwm1grp"; + sirf,function = "pwm1"; + }; + }; + pwm2_pins_a: pwm2@0 { + pwm { + sirf,pins = "pwm2grp"; + sirf,function = "pwm2"; + }; + }; + pwm3_pins_a: pwm3@0 { + pwm { + sirf,pins = "pwm3grp"; + sirf,function = "pwm3"; + }; + }; + gps_pins_a: gps@0 { + gps { + sirf,pins = "gpsgrp"; + sirf,function = "gps"; + }; + }; + vip_pins_a: vip@0 { + vip { + sirf,pins = "vipgrp"; + sirf,function = "vip"; + }; + }; + sdmmc0_pins_a: sdmmc0@0 { + sdmmc0 { + sirf,pins = "sdmmc0grp"; + sirf,function = "sdmmc0"; + }; + }; + sdmmc1_pins_a: sdmmc1@0 { + sdmmc1 { + sirf,pins = "sdmmc1grp"; + sirf,function = "sdmmc1"; + }; + }; + sdmmc2_pins_a: sdmmc2@0 { + sdmmc2 { + sirf,pins = "sdmmc2grp"; + sirf,function = "sdmmc2"; + }; + }; + sdmmc3_pins_a: sdmmc3@0 { + sdmmc3 { + sirf,pins = "sdmmc3grp"; + sirf,function = "sdmmc3"; + }; + }; + sdmmc4_pins_a: sdmmc4@0 { + sdmmc4 { + sirf,pins = "sdmmc4grp"; + sirf,function = "sdmmc4"; + }; + }; + sdmmc5_pins_a: sdmmc5@0 { + sdmmc5 { + sirf,pins = "sdmmc5grp"; + sirf,function = "sdmmc5"; + }; + }; + i2s_pins_a: i2s@0 { + i2s { + sirf,pins = "i2sgrp"; + sirf,function = "i2s"; + }; + }; + ac97_pins_a: ac97@0 { + ac97 { + sirf,pins = "ac97grp"; + sirf,function = "ac97"; + }; + }; + nand_pins_a: nand@0 { + nand { + sirf,pins = "nandgrp"; + sirf,function = "nand"; + }; + }; + usp0_pins_a: usp0@0 { + usp0 { + sirf,pins = "usp0grp"; + sirf,function = "usp0"; + }; + }; + usp1_pins_a: usp1@0 { + usp1 { + sirf,pins = "usp1grp"; + sirf,function = "usp1"; + }; + }; + usp2_pins_a: usp2@0 { + usp2 { + sirf,pins = "usp2grp"; + sirf,function = "usp2"; + }; + }; + usb0_utmi_drvbus_pins_a: usb0_utmi_drvbus@0 { + usb0_utmi_drvbus { + sirf,pins = "usb0_utmi_drvbusgrp"; + sirf,function = "usb0_utmi_drvbus"; + }; + }; + usb1_utmi_drvbus_pins_a: usb1_utmi_drvbus@0 { + usb1_utmi_drvbus { + sirf,pins = "usb1_utmi_drvbusgrp"; + sirf,function = "usb1_utmi_drvbus"; + }; + }; + warm_rst_pins_a: warm_rst@0 { + warm_rst { + sirf,pins = "warm_rstgrp"; + sirf,function = "warm_rst"; + }; + }; + pulse_count_pins_a: pulse_count@0 { + pulse_count { + sirf,pins = "pulse_countgrp"; + sirf,function = "pulse_count"; + }; + }; + cko0_rst_pins_a: cko0_rst@0 { + cko0_rst { + sirf,pins = "cko0_rstgrp"; + sirf,function = "cko0_rst"; + }; + }; + cko1_rst_pins_a: cko1_rst@0 { + cko1_rst { + sirf,pins = "cko1_rstgrp"; + sirf,function = "cko1_rst"; + }; + }; + }; + + pwm@b0130000 { + compatible = "sirf,prima2-pwm"; + reg = <0xb0130000 0x10000>; + }; + + efusesys@b0140000 { + compatible = "sirf,prima2-efuse"; + reg = <0xb0140000 0x10000>; + }; + + pulsec@b0150000 { + compatible = "sirf,prima2-pulsec"; + reg = <0xb0150000 0x10000>; + interrupts = <48>; + }; + + pci-iobg { + compatible = "sirf,prima2-pciiobg", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x56000000 0x56000000 0x1b00000>; + + sd0: sdhci@56000000 { + cell-index = <0>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56000000 0x100000>; + interrupts = <38>; + }; + + sd1: sdhci@56100000 { + cell-index = <1>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56100000 0x100000>; + interrupts = <38>; + }; + + sd2: sdhci@56200000 { + cell-index = <2>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56200000 0x100000>; + interrupts = <23>; + }; + + sd3: sdhci@56300000 { + cell-index = <3>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56300000 0x100000>; + interrupts = <23>; + }; + + sd4: sdhci@56400000 { + cell-index = <4>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56400000 0x100000>; + interrupts = <39>; + }; + + sd5: sdhci@56500000 { + cell-index = <5>; + compatible = "sirf,prima2-sdhc"; + reg = <0x56500000 0x100000>; + interrupts = <39>; + }; + + pci-copy@57900000 { + compatible = "sirf,prima2-pcicp"; + reg = <0x57900000 0x100000>; + interrupts = <40>; + }; + + rom-interface@57a00000 { + compatible = "sirf,prima2-romif"; + reg = <0x57a00000 0x100000>; + }; + }; + }; + + rtc-iobg { + compatible = "sirf,prima2-rtciobg", "sirf-prima2-rtciobg-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x80030000 0x10000>; + + gpsrtc@1000 { + compatible = "sirf,prima2-gpsrtc"; + reg = <0x1000 0x1000>; + interrupts = <55 56 57>; + }; + + sysrtc@2000 { + compatible = "sirf,prima2-sysrtc"; + reg = <0x2000 0x1000>; + interrupts = <52 53 54>; + }; + + pwrc@3000 { + compatible = "sirf,prima2-pwrc"; + reg = <0x3000 0x1000>; + interrupts = <32>; + }; + }; + + uus-iobg { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0xb8000000 0xb8000000 0x40000>; + + usb0: usb@b00e0000 { + compatible = "chipidea,ci13611a-prima2"; + reg = <0xb8000000 0x10000>; + interrupts = <10>; + }; + + usb1: usb@b00f0000 { + compatible = "chipidea,ci13611a-prima2"; + reg = <0xb8010000 0x10000>; + interrupts = <11>; + }; + + sata@b00f0000 { + compatible = "synopsys,dwc-ahsata"; + reg = <0xb8020000 0x10000>; + interrupts = <37>; + }; + + security@b00f0000 { + compatible = "sirf,prima2-security"; + reg = <0xb8030000 0x10000>; + interrupts = <42>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..d7c5d721a5c78fdea12fd8cff9abc7af0985f1e7 --- /dev/null +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -0,0 +1,14 @@ +/* The pxa3xx skeleton simply augments the 2xx version */ +/include/ "pxa2xx.dtsi" + +/ { + model = "Marvell PXA27x familiy SoC"; + compatible = "marvell,pxa27x"; + + pxabus { + pxairq: interrupt-controller@40d00000 { + marvell,intc-priority; + marvell,intc-nr-irqs = <34>; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..f18aad35e8b356bae596aaac27d2a2502684faf8 --- /dev/null +++ b/arch/arm/boot/dts/pxa2xx.dtsi @@ -0,0 +1,132 @@ +/* + * pxa2xx.dtsi - Device Tree Include file for Marvell PXA2xx family SoC + * + * Copyright (C) 2011 Marek Vasut + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Marvell PXA2xx family SoC"; + compatible = "marvell,pxa2xx"; + interrupt-parent = <&pxairq>; + + aliases { + serial0 = &ffuart; + serial1 = &btuart; + serial2 = &stuart; + serial3 = &hwuart; + i2c0 = &pwri2c; + i2c1 = &pxai2c1; + }; + + cpus { + cpu@0 { + compatible = "arm,xscale"; + }; + }; + + pxabus { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pxairq: interrupt-controller@40d00000 { + #interrupt-cells = <1>; + compatible = "marvell,pxa-intc"; + interrupt-controller; + interrupt-parent; + marvell,intc-nr-irqs = <32>; + reg = <0x40d00000 0xd0>; + }; + + gpio: gpio@40e00000 { + compatible = "mrvl,pxa-gpio"; + #address-cells = <0x1>; + #size-cells = <0x1>; + reg = <0x40e00000 0x10000>; + gpio-controller; + #gpio-cells = <0x2>; + interrupts = <10>; + interrupt-names = "gpio_mux"; + interrupt-controller; + #interrupt-cells = <0x2>; + ranges; + + gcb0: gpio@40e00000 { + reg = <0x40e00000 0x4>; + }; + + gcb1: gpio@40e00004 { + reg = <0x40e00004 0x4>; + }; + + gcb2: gpio@40e00008 { + reg = <0x40e00008 0x4>; + }; + gcb3: gpio@40e0000c { + reg = <0x40e0000c 0x4>; + }; + }; + + ffuart: uart@40100000 { + compatible = "mrvl,pxa-uart"; + reg = <0x40100000 0x30>; + interrupts = <22>; + status = "disabled"; + }; + + btuart: uart@40200000 { + compatible = "mrvl,pxa-uart"; + reg = <0x40200000 0x30>; + interrupts = <21>; + status = "disabled"; + }; + + stuart: uart@40700000 { + compatible = "mrvl,pxa-uart"; + reg = <0x40700000 0x30>; + interrupts = <20>; + status = "disabled"; + }; + + hwuart: uart@41100000 { + compatible = "mrvl,pxa-uart"; + reg = <0x41100000 0x30>; + interrupts = <7>; + status = "disabled"; + }; + + pxai2c1: i2c@40301680 { + compatible = "mrvl,pxa-i2c"; + reg = <0x40301680 0x30>; + interrupts = <18>; + #address-cells = <0x1>; + #size-cells = <0>; + status = "disabled"; + }; + + usb0: ohci@4c000000 { + compatible = "mrvl,pxa-ohci"; + reg = <0x4c000000 0x10000>; + interrupts = <3>; + status = "disabled"; + }; + + mmc0: mmc@41100000 { + compatible = "mrvl,pxa-mmc"; + reg = <0x41100000 0x1000>; + interrupts = <23>; + status = "disabled"; + }; + + rtc@40900000 { + compatible = "marvell,pxa-rtc"; + reg = <0x40900000 0x3c>; + interrupts = <30 31>; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa3xx.dtsi b/arch/arm/boot/dts/pxa3xx.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..f9d92da86783d75d00788b3104abd995c6022bce --- /dev/null +++ b/arch/arm/boot/dts/pxa3xx.dtsi @@ -0,0 +1,32 @@ +/* The pxa3xx skeleton simply augments the 2xx version */ +/include/ "pxa2xx.dtsi" + +/ { + model = "Marvell PXA3xx familiy SoC"; + compatible = "marvell,pxa3xx"; + + pxabus { + pwri2c: i2c@40f500c0 { + compatible = "mrvl,pwri2c"; + reg = <0x40f500c0 0x30>; + interrupts = <6>; + #address-cells = <0x1>; + #size-cells = <0>; + status = "disabled"; + }; + + nand0: nand@43100000 { + compatible = "marvell,pxa3xx-nand"; + reg = <0x43100000 90>; + interrupts = <45>; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + pxairq: interrupt-controller@40d00000 { + marvell,intc-priority; + marvell,intc-nr-irqs = <56>; + }; + }; +}; diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts index e92be5a474e76f9bff3bb98e93682bc0c431a7d1..595492aa505372047aab605aff58b043f16896f6 100644 --- a/arch/arm/boot/dts/pxa910-dkb.dts +++ b/arch/arm/boot/dts/pxa910-dkb.dts @@ -29,6 +29,143 @@ }; twsi1: i2c@d4011000 { status = "okay"; + + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + interrupts = <4>; + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <1>; + + marvell,88pm860x-irq-read-clr; + marvell,88pm860x-slave-addr = <0x11>; + + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + regulator-always-on; + }; + LDO2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO5 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO13 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + rtc { + marvell,88pm860x-vrtc = <1>; + }; + touch { + marvell,88pm860x-gpadc-prebias = <1>; + marvell,88pm860x-gpadc-slot-cycle = <1>; + marvell,88pm860x-tsi-prebias = <6>; + marvell,88pm860x-pen-prebias = <16>; + marvell,88pm860x-pen-prechg = <2>; + marvell,88pm860x-resistor-X = <300>; + }; + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; + }; + leds { + led0-red { + marvell,88pm860x-iset = <12>; + }; + led0-green { + marvell,88pm860x-iset = <12>; + }; + led0-blue { + marvell,88pm860x-iset = <12>; + }; + }; + }; }; rtc: rtc@d4010000 { status = "okay"; diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi index aebf32de73b4ea31c44e2d18fd1c6f75c578488e..825aaca33034d9f23e63ade23bd611a38c3a6f9d 100644 --- a/arch/arm/boot/dts/pxa910.dtsi +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -25,6 +25,11 @@ interrupt-parent = <&intc>; ranges; + L2: l2-cache { + compatible = "marvell,tauros2-cache"; + marvell,tauros2-cache-features = <0x3>; + }; + axi@d4200000 { /* AXI */ compatible = "mrvl,axi-bus", "simple-bus"; #address-cells = <1>; @@ -115,6 +120,8 @@ twsi1: i2c@d4011000 { compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xd4011000 0x1000>; interrupts = <7>; mrvl,i2c-fast-mode; @@ -123,6 +130,8 @@ twsi2: i2c@d4037000 { compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xd4037000 0x1000>; interrupts = <54>; status = "disabled"; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index 7e334d4cae217c8584032666b4301325944786ed..702c0baa6004bb9bddba8bbe5c19f008c31bbce0 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "db8500.dtsi" +/include/ "dbx5x0.dtsi" / { model = "Calao Systems Snowball platform with device tree"; @@ -83,6 +83,22 @@ }; soc-u9500 { + + sound { + compatible = "stericsson,snd-soc-mop500"; + + stericsson,cpu-dai = <&msp1 &msp3>; + stericsson,audio-codec = <&codec>; + }; + + msp1: msp@80124000 { + status = "okay"; + }; + + msp3: msp@80125000 { + status = "okay"; + }; + external-bus@50000000 { status = "okay"; @@ -111,7 +127,6 @@ mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; - #gpio-cells = <1>; cd-gpios = <&gpio6 26 0x4>; // 218 cd-inverted; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index f146dbf6f7f8c40f0a453d0e2d09887943ceef3f..c3ef1ad26b6a29b0f86124fc7fcb2276aa08a034 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -275,6 +275,160 @@ i2c@7000d000 { status = "okay"; clock-frequency = <400000>; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + regulator@4 { + reg = <4>; + regulator-compatible = "ldo0"; + regulator-name = "vdd_ldo0,vddio_pex_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out,vdd_cell"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; }; pmc { @@ -310,6 +464,72 @@ bus-width = <8>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pmic 0 0>; + }; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&pmic 1 0>; + enable-active-high; + }; + + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd_1v05"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + gpio = <&pmic 2 0>; + enable-active-high; + /* Hack until board-harmony-pcie.c is removed */ + status = "disabled"; + }; + + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "vdd_pnl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio 22 0>; /* gpio PC6 */ + enable-active-high; + }; + + regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio 176 0>; /* gpio PW0 */ + enable-active-high; + }; + }; + sound { compatible = "nvidia,tegra-audio-wm8903-harmony", "nvidia,tegra-audio-wm8903"; diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts new file mode 100644 index 0000000000000000000000000000000000000000..a2d6d6541f83ebc8bf3e73d7cff4b0b1848959ef --- /dev/null +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -0,0 +1,58 @@ +/dts-v1/; + +/include/ "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Medcom-Wide board"; + compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20"; + + i2c@7000c000 { + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <187 0x04>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff + 0xffffffff + 0 + 0xffffffff + 0xffffffff>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + + sound { + compatible = "ad,tegra-audio-wm8903-medcom-wide", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "Avionic Design Medcom-Wide"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 684a9e1ff7e9c05d1479c071e3d4658c652337ee..ddf287f52d498dd5bfe6d5451e019f64dda6f20c 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -272,12 +272,170 @@ status = "okay"; clock-frequency = <400000>; + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&p5valw_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "+1.2vs_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "+1.0vs_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "+3.7vs_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "+1.1vs_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "+1.2vs_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "+3.3vs_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "+1.8vs_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "+2.85vs_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + /* + * Research indicates this should be + * 1.8v; other boards that use this + * rail for the same purpose need it + * set to 1.8v. The schematic signal + * name is incorrect; perhaps copied + * from an incorrect NVIDIA reference. + */ + regulator-name = "+2.85vs_ldo6,avdd_vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "+3.3vs_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "+1.8vs_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "+2.85vs_ldo9,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "+3.3vs_rtc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + adt7461@4c { compatible = "adi,adt7461"; reg = <0x4c>; }; }; + pmc { + nvidia,invert-interrupt; + }; + usb@c5000000 { status = "okay"; }; @@ -325,6 +483,21 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + p5valw_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "+5valw"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; + sound { compatible = "nvidia,tegra-audio-alc5632-paz00", "nvidia,tegra-audio-alc5632"; diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts new file mode 100644 index 0000000000000000000000000000000000000000..331a3ef24d591d0f84d04fce3d92d82d40742955 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -0,0 +1,50 @@ +/dts-v1/; + +/include/ "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Plutux board"; + compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20"; + + i2c@7000c000 { + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <187 0x04>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff + 0xffffffff + 0 + 0xffffffff + 0xffffffff>; + }; + }; + + sound { + compatible = "ad,tegra-audio-plutux", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "Avionic Design Plutux"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 85e621ab2968d2947bf0b6dac96a305d5afbf614..e60dc7124e9271b41c7fa27734cee825a3805365 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -374,6 +374,154 @@ status = "okay"; clock-frequency = <400000>; + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sm0,vdd_core"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sm1,vdd_cpu"; + regulator-min-microvolt = <1125000>; + regulator-max-microvolt = <1125000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out,vdd_cell"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + temperature-sensor@4c { compatible = "nct1008"; reg = <0x4c>; @@ -387,6 +535,10 @@ }; }; + pmc { + nvidia,invert-interrupt; + }; + memory-controller@0x7000f400 { emc-table@190000 { reg = <190000>; @@ -473,6 +625,40 @@ }; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pmic 0 0>; + }; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&pmic 1 0>; + enable-active-high; + }; + }; + sound { compatible = "nvidia,tegra-audio-wm8903-seaboard", "nvidia,tegra-audio-wm8903"; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..f18cec9f6a77ae0614c010b785ad5e2017c6c219 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -0,0 +1,449 @@ +/include/ "tegra20.dtsi" + +/ { + model = "Avionic Design Tamonten SOM"; + compatible = "ad,tamonten", "nvidia,tegra20"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ata { + nvidia,pins = "ata"; + nvidia,function = "ide"; + }; + atb { + nvidia,pins = "atb", "gma", "gme"; + nvidia,function = "sdio4"; + }; + atc { + nvidia,pins = "atc"; + nvidia,function = "nand"; + }; + atd { + nvidia,pins = "atd", "ate", "gmb", "gmd", "gpu", + "spia", "spib", "spic"; + nvidia,function = "gmi"; + }; + cdev1 { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + }; + cdev2 { + nvidia,pins = "cdev2"; + nvidia,function = "pllp_out4"; + }; + crtp { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + }; + csus { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + }; + dap1 { + nvidia,pins = "dap1"; + nvidia,function = "dap1"; + }; + dap2 { + nvidia,pins = "dap2"; + nvidia,function = "dap2"; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + }; + dap4 { + nvidia,pins = "dap4"; + nvidia,function = "dap4"; + }; + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + dta { + nvidia,pins = "dta", "dtd"; + nvidia,function = "sdio2"; + }; + dtb { + nvidia,pins = "dtb", "dtc", "dte"; + nvidia,function = "rsvd1"; + }; + dtf { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + }; + gmc { + nvidia,pins = "gmc"; + nvidia,function = "uartd"; + }; + gpu7 { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + }; + gpv { + nvidia,pins = "gpv", "slxa", "slxk"; + nvidia,function = "pcie"; + }; + hdint { + nvidia,pins = "hdint", "pta"; + nvidia,function = "hdmi"; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + }; + irrx { + nvidia,pins = "irrx", "irtx"; + nvidia,function = "uarta"; + }; + kbca { + nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", + "kbce", "kbcf"; + nvidia,function = "kbc"; + }; + lcsn { + nvidia,pins = "lcsn", "ld0", "ld1", "ld2", + "ld3", "ld4", "ld5", "ld6", "ld7", + "ld8", "ld9", "ld10", "ld11", "ld12", + "ld13", "ld14", "ld15", "ld16", "ld17", + "ldc", "ldi", "lhp0", "lhp1", "lhp2", + "lhs", "lm0", "lm1", "lpp", "lpw0", + "lpw1", "lpw2", "lsc0", "lsc1", "lsck", + "lsda", "lsdi", "lspi", "lvp0", "lvp1", + "lvs"; + nvidia,function = "displaya"; + }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + }; + rm { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + }; + sdb { + nvidia,pins = "sdb", "sdc", "sdd"; + nvidia,function = "pwm"; + }; + sdio1 { + nvidia,pins = "sdio1"; + nvidia,function = "sdio1"; + }; + slxc { + nvidia,pins = "slxc", "slxd"; + nvidia,function = "spdif"; + }; + spid { + nvidia,pins = "spid", "spie", "spif"; + nvidia,function = "spi1"; + }; + spig { + nvidia,pins = "spig", "spih"; + nvidia,function = "spi2_alt"; + }; + uaa { + nvidia,pins = "uaa", "uab", "uda"; + nvidia,function = "ulpi"; + }; + uad { + nvidia,pins = "uad"; + nvidia,function = "irda"; + }; + uca { + nvidia,pins = "uca", "ucb"; + nvidia,function = "uartc"; + }; + conf_ata { + nvidia,pins = "ata", "atb", "atc", "atd", "ate", + "cdev1", "cdev2", "dap1", "dtb", "gma", + "gmb", "gmc", "gmd", "gme", "gpu7", + "gpv", "i2cp", "pta", "rm", "slxa", + "slxk", "spia", "spib", "uac"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + conf_ck32 { + nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", + "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; + nvidia,pull = <0>; + }; + conf_csus { + nvidia,pins = "csus", "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; + conf_crtp { + nvidia,pins = "crtp", "dap2", "dap3", "dap4", + "dtc", "dte", "dtf", "gpu", "sdio1", + "slxc", "slxd", "spdi", "spdo", "spig", + "uda"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + conf_ddc { + nvidia,pins = "ddc", "dta", "dtd", "kbca", + "kbcb", "kbcc", "kbcd", "kbce", "kbcf", + "sdc"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + conf_hdint { + nvidia,pins = "hdint", "lcsn", "ldc", "lm1", + "lpw1", "lsc1", "lsck", "lsda", "lsdi", + "lvp0", "owc", "sdb"; + nvidia,tristate = <1>; + }; + conf_irrx { + nvidia,pins = "irrx", "irtx", "sdd", "spic", + "spie", "spih", "uaa", "uab", "uad", + "uca", "ucb"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + }; + conf_lc { + nvidia,pins = "lc", "ls"; + nvidia,pull = <2>; + }; + conf_ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldi", "lhp0", + "lhp1", "lhp2", "lhs", "lm0", "lpp", + "lpw0", "lpw2", "lsc0", "lspi", "lvp1", + "lvs", "pmc"; + nvidia,tristate = <0>; + }; + conf_ld17_0 { + nvidia,pins = "ld17_0", "ld19_18", "ld21_20", + "ld23_22"; + nvidia,pull = <1>; + }; + }; + }; + + i2s@70002800 { + status = "okay"; + }; + + serial@70006300 { + clock-frequency = <216000000>; + status = "okay"; + }; + + i2c@7000c000 { + clock-frequency = <400000>; + status = "okay"; + }; + + i2c@7000d000 { + clock-frequency = <400000>; + status = "okay"; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sys_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sys_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sys_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + regulator@4 { + reg = <4>; + regulator-compatible = "ldo0"; + regulator-name = "vdd_ldo0,vddio_pex_clk"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac"; + /* + * According to the Tegra 2 Automotive + * DataSheet, a typical value for this + * would be 2.8V, but the PMIC only + * supports 2.85V. + */ + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,vdd_ddr_rx,avdd_cam"; + /* + * According to the Tegra 2 Automotive + * DataSheet, a typical value for this + * would be 2.8V, but the PMIC only + * supports 2.85V. + */ + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; + + pmc { + nvidia,invert-interrupt; + }; + + usb@c5008000 { + status = "okay"; + }; + + sdhci@c8000600 { + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + bus-width = <4>; + status = "okay"; + }; + + regulators { + compatible = "simple-bus"; + + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts new file mode 100644 index 0000000000000000000000000000000000000000..9aff31b0fe4a5c156b38c8d6a6b38ea172ca8081 --- /dev/null +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -0,0 +1,53 @@ +/dts-v1/; + +/include/ "tegra20-tamonten.dtsi" + +/ { + model = "Avionic Design Tamonten Evaluation Carrier"; + compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20"; + + i2c@7000c000 { + clock-frequency = <400000>; + status = "okay"; + + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <187 0x04>; + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff + 0xffffffff + 0 + 0xffffffff + 0xffffffff>; + }; + }; + + sound { + compatible = "ad,tegra-audio-wm8903-tec", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "Avionic Design TEC"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index be90544e6b590ca44b81aa0b119eb1dca504238c..3e5952fcfbc55cc5db7cb514c42191aef2ea28b0 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -289,6 +289,158 @@ i2c@7000d000 { status = "okay"; clock-frequency = <400000>; + + pmic: tps6586x@34 { + compatible = "ti,tps6586x"; + reg = <0x34>; + interrupts = <0 86 0x4>; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + sys-supply = <&vdd_5v0_reg>; + vin-sm0-supply = <&sys_reg>; + vin-sm1-supply = <&sys_reg>; + vin-sm2-supply = <&sys_reg>; + vinldo01-supply = <&sm2_reg>; + vinldo23-supply = <&sm2_reg>; + vinldo4-supply = <&sm2_reg>; + vinldo678-supply = <&sm2_reg>; + vinldo9-supply = <&sm2_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + sys_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sys"; + regulator-name = "vdd_sys"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sm0"; + regulator-name = "vdd_sm0,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sm1"; + regulator-name = "vdd_sm1,vdd_cpu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sm2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sm2"; + regulator-name = "vdd_sm2,vin_ldo*"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + regulator-always-on; + }; + + /* LDO0 is not connected to anything */ + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_ldo1,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_ldo2,vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo3"; + regulator-name = "vdd_ldo3,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_ldo4,avdd_osc,vddio_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo5"; + regulator-name = "vdd_ldo5,vcore_mmc"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo6"; + regulator-name = "vdd_ldo6,avdd_vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ldo8,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo9"; + regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo_rtc"; + regulator-name = "vdd_rtc_out,vdd_cell"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; + }; + + pmc { + nvidia,invert-interrupt; }; usb@c5000000 { @@ -317,6 +469,60 @@ bus-width = <8>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_1v5"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + gpio = <&pmic 0 0>; + }; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + gpio = <&pmic 1 0>; + enable-active-high; + }; + + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd_pnl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio 22 0>; /* gpio PC6 */ + enable-active-high; + }; + + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpio = <&gpio 176 0>; /* gpio PW0 */ + enable-active-high; + }; + }; + sound { compatible = "nvidia,tegra-audio-wm8903-ventana", "nvidia,tegra-audio-wm8903"; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index 6916310bf58f8534af4abe705f0cbc757238b5aa..c636d002d6d8a104c779bdd4c2f94fcc6cda99d7 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -261,6 +261,286 @@ gpio-controller; #gpio-cells = <2>; }; + + max8907@3c { + compatible = "maxim,max8907"; + reg = <0x3c>; + interrupts = <0 86 0x4>; + + maxim,system-power-controller; + + mbatt-supply = <&usb0_vbus_reg>; + in-v1-supply = <&mbatt_reg>; + in-v2-supply = <&mbatt_reg>; + in-v3-supply = <&mbatt_reg>; + in1-supply = <&mbatt_reg>; + in2-supply = <&nvvdd_sv3_reg>; + in3-supply = <&mbatt_reg>; + in4-supply = <&mbatt_reg>; + in5-supply = <&mbatt_reg>; + in6-supply = <&mbatt_reg>; + in7-supply = <&mbatt_reg>; + in8-supply = <&mbatt_reg>; + in9-supply = <&mbatt_reg>; + in10-supply = <&mbatt_reg>; + in11-supply = <&mbatt_reg>; + in12-supply = <&mbatt_reg>; + in13-supply = <&mbatt_reg>; + in14-supply = <&mbatt_reg>; + in15-supply = <&mbatt_reg>; + in16-supply = <&mbatt_reg>; + in17-supply = <&nvvdd_sv3_reg>; + in18-supply = <&nvvdd_sv3_reg>; + in19-supply = <&mbatt_reg>; + in20-supply = <&mbatt_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + mbatt_reg: regulator@0 { + reg = <0>; + regulator-compatible = "mbatt"; + regulator-name = "vbat_pmu"; + regulator-always-on; + }; + + regulator@1 { + reg = <1>; + regulator-compatible = "sd1"; + regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + regulator@2 { + reg = <2>; + regulator-compatible = "sd2"; + regulator-name = "nvvdd_sv2,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + nvvdd_sv3_reg: regulator@3 { + reg = <3>; + regulator-compatible = "sd3"; + regulator-name = "nvvdd_sv3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@4 { + reg = <4>; + regulator-compatible = "ldo1"; + regulator-name = "nvvdd_ldo1,vddio_rx_ddr,vcore_acc"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@5 { + reg = <5>; + regulator-compatible = "ldo2"; + regulator-name = "nvvdd_ldo2,avdd_pll*"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + regulator@6 { + reg = <6>; + regulator-compatible = "ldo3"; + regulator-name = "nvvdd_ldo3,vcom_1v8b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + regulator@7 { + reg = <7>; + regulator-compatible = "ldo4"; + regulator-name = "nvvdd_ldo4,avdd_usb*"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + regulator@8 { + reg = <8>; + regulator-compatible = "ldo5"; + regulator-name = "nvvdd_ldo5,vcore_mmc,avdd_lcd1,vddio_1wire"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + regulator@9 { + reg = <9>; + regulator-compatible = "ldo6"; + regulator-name = "nvvdd_ldo6,avdd_hdmi_pll"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@10 { + reg = <10>; + regulator-compatible = "ldo7"; + regulator-name = "nvvdd_ldo7,avddio_audio"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + regulator@11 { + reg = <11>; + regulator-compatible = "ldo8"; + regulator-name = "nvvdd_ldo8,vcom_3v0,vcore_cmps"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + regulator@12 { + reg = <12>; + regulator-compatible = "ldo9"; + regulator-name = "nvvdd_ldo9,avdd_cam*"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + regulator@13 { + reg = <13>; + regulator-compatible = "ldo10"; + regulator-name = "nvvdd_ldo10,avdd_usb_ic_3v0"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + regulator@14 { + reg = <14>; + regulator-compatible = "ldo11"; + regulator-name = "nvvdd_ldo11,vddio_pex_clk,vcom_33,avdd_hdmi"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@15 { + reg = <15>; + regulator-compatible = "ldo12"; + regulator-name = "nvvdd_ldo12,vddio_sdio"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + regulator@16 { + reg = <16>; + regulator-compatible = "ldo13"; + regulator-name = "nvvdd_ldo13,vcore_phtn,vdd_af"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + regulator@17 { + reg = <17>; + regulator-compatible = "ldo14"; + regulator-name = "nvvdd_ldo14,avdd_vdac"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + regulator@18 { + reg = <18>; + regulator-compatible = "ldo15"; + regulator-name = "nvvdd_ldo15,vcore_temp,vddio_hdcp"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + regulator@19 { + reg = <19>; + regulator-compatible = "ldo16"; + regulator-name = "nvvdd_ldo16,vdd_dbrtr"; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + }; + + regulator@20 { + reg = <20>; + regulator-compatible = "ldo17"; + regulator-name = "nvvdd_ldo17,vddio_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + regulator@21 { + reg = <21>; + regulator-compatible = "ldo18"; + regulator-name = "nvvdd_ldo18,vddio_vi,vcore_cam*"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + regulator@22 { + reg = <22>; + regulator-compatible = "ldo19"; + regulator-name = "nvvdd_ldo19,avdd_lcd2,vddio_lx"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + regulator@23 { + reg = <23>; + regulator-compatible = "ldo20"; + regulator-name = "nvvdd_ldo20,vddio_ddr_1v2,vddio_hsic,vcom_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + regulator@24 { + reg = <24>; + regulator-compatible = "out5v"; + regulator-name = "usb0_vbus_reg"; + }; + + regulator@25 { + reg = <25>; + regulator-compatible = "out33v"; + regulator-name = "pmu_out3v3"; + }; + + regulator@26 { + reg = <26>; + regulator-compatible = "bbat"; + regulator-name = "pmu_bbat"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <2400000>; + regulator-always-on; + }; + + regulator@27 { + reg = <27>; + regulator-compatible = "sdby"; + regulator-name = "vdd_aon"; + regulator-always-on; + }; + + regulator@28 { + reg = <28>; + regulator-compatible = "vrtc"; + regulator-name = "vrtc,pmu_vccadc"; + regulator-always-on; + }; + }; + }; + }; + + pmc { + nvidia,invert-interrupt; }; usb@c5000000 { @@ -284,6 +564,21 @@ bus-width = <8>; }; + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb0_vbus_reg: regulator { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + }; + sound { compatible = "nvidia,tegra-audio-wm8753-whistler", "nvidia,tegra-audio-wm8753"; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 405d1673904e53805a11551693446b55cfa1831c..67a6cd910b9612d0a3aa7d206f1570a709a1226e 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -123,7 +123,7 @@ status = "disabled"; }; - pwm { + pwm: pwm { compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts new file mode 100644 index 0000000000000000000000000000000000000000..dd4222f00eca9b4dc82637976283235906d1b708 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -0,0 +1,87 @@ +/dts-v1/; + +/include/ "tegra30-cardhu.dtsi" + +/* This dts file support the cardhu A02 version of board */ + +/ { + model = "NVIDIA Tegra30 Cardhu A02 evaluation board"; + compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30"; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + ddr_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 6 0>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "sys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 7 0>; + }; + + usb1_vbus_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 68 0>; /* GPIO PI4 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + usb3_vbus_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 63 0>; /* GPIO PH7 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + vdd_5v0_reg: regulator@104 { + compatible = "regulator-fixed"; + reg = <104>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pmic 2 0>; + }; + + vdd_bl_reg: regulator@105 { + compatible = "regulator-fixed"; + reg = <105>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 83 0>; /* GPIO PK3 */ + }; + }; +}; + diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts new file mode 100644 index 0000000000000000000000000000000000000000..0828f097ca860490b7edd786b619bf889535014a --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -0,0 +1,98 @@ +/dts-v1/; + +/include/ "tegra30-cardhu.dtsi" + +/* This dts file support the cardhu A04 and later versions of board */ + +/ { + model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board"; + compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30"; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + ddr_reg: regulator@100 { + compatible = "regulator-fixed"; + regulator-name = "ddr"; + reg = <100>; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 7 0>; + }; + + sys_3v3_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "sys_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&pmic 6 0>; + }; + + usb1_vbus_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 238 0>; /* GPIO PDD6 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + usb3_vbus_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 236 0>; /* GPIO PDD4 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + + vdd_5v0_reg: regulator@104 { + compatible = "regulator-fixed"; + reg = <104>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&pmic 8 0>; + }; + + vdd_bl_reg: regulator@105 { + compatible = "regulator-fixed"; + reg = <105>; + regulator-name = "vdd_bl"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 234 0>; /* GPIO PDD2 */ + }; + + vdd_bl2_reg: regulator@106 { + compatible = "regulator-fixed"; + reg = <106>; + regulator-name = "vdd_bl2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 232 0>; /* GPIO PDD0 */ + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts deleted file mode 100644 index c169bced131e32038f4523f599c054b22690bdb6..0000000000000000000000000000000000000000 --- a/arch/arm/boot/dts/tegra30-cardhu.dts +++ /dev/null @@ -1,171 +0,0 @@ -/dts-v1/; - -/include/ "tegra30.dtsi" - -/ { - model = "NVIDIA Tegra30 Cardhu evaluation board"; - compatible = "nvidia,cardhu", "nvidia,tegra30"; - - memory { - reg = <0x80000000 0x40000000>; - }; - - pinmux { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - sdmmc1_clk_pz0 { - nvidia,pins = "sdmmc1_clk_pz0"; - nvidia,function = "sdmmc1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - sdmmc1_cmd_pz1 { - nvidia,pins = "sdmmc1_cmd_pz1", - "sdmmc1_dat0_py7", - "sdmmc1_dat1_py6", - "sdmmc1_dat2_py5", - "sdmmc1_dat3_py4"; - nvidia,function = "sdmmc1"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - }; - sdmmc4_clk_pcc4 { - nvidia,pins = "sdmmc4_clk_pcc4", - "sdmmc4_rst_n_pcc3"; - nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - sdmmc4_dat0_paa0 { - nvidia,pins = "sdmmc4_dat0_paa0", - "sdmmc4_dat1_paa1", - "sdmmc4_dat2_paa2", - "sdmmc4_dat3_paa3", - "sdmmc4_dat4_paa4", - "sdmmc4_dat5_paa5", - "sdmmc4_dat6_paa6", - "sdmmc4_dat7_paa7"; - nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - }; - dap2_fs_pa2 { - nvidia,pins = "dap2_fs_pa2", - "dap2_sclk_pa3", - "dap2_din_pa4", - "dap2_dout_pa5"; - nvidia,function = "i2s1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - }; - }; - }; - - serial@70006000 { - status = "okay"; - clock-frequency = <408000000>; - }; - - i2c@7000c000 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c400 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000c500 { - status = "okay"; - clock-frequency = <100000>; - - /* ALS and Proximity sensor */ - isl29028@44 { - compatible = "isil,isl29028"; - reg = <0x44>; - interrupt-parent = <&gpio>; - interrupts = <88 0x04>; /*gpio PL0 */ - }; - }; - - i2c@7000c700 { - status = "okay"; - clock-frequency = <100000>; - }; - - i2c@7000d000 { - status = "okay"; - clock-frequency = <100000>; - - wm8903: wm8903@1a { - compatible = "wlf,wm8903"; - reg = <0x1a>; - interrupt-parent = <&gpio>; - interrupts = <179 0x04>; /* gpio PW3 */ - - gpio-controller; - #gpio-cells = <2>; - - micdet-cfg = <0>; - micdet-delay = <100>; - gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; - }; - - tps62361 { - compatible = "ti,tps62361"; - reg = <0x60>; - - regulator-name = "tps62361-vout"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - ti,vsel0-state-high; - ti,vsel1-state-high; - }; - }; - - ahub { - i2s@70080400 { - status = "okay"; - }; - }; - - sdhci@78000000 { - status = "okay"; - cd-gpios = <&gpio 69 0>; /* gpio PI5 */ - wp-gpios = <&gpio 155 0>; /* gpio PT3 */ - power-gpios = <&gpio 31 0>; /* gpio PD7 */ - bus-width = <4>; - }; - - sdhci@78000600 { - status = "okay"; - bus-width = <8>; - }; - - sound { - compatible = "nvidia,tegra-audio-wm8903-cardhu", - "nvidia,tegra-audio-wm8903"; - nvidia,model = "NVIDIA Tegra Cardhu"; - - nvidia,audio-routing = - "Headphone Jack", "HPOUTR", - "Headphone Jack", "HPOUTL", - "Int Spk", "ROP", - "Int Spk", "RON", - "Int Spk", "LOP", - "Int Spk", "LON", - "Mic Jack", "MICBIAS", - "IN1L", "Mic Jack"; - - nvidia,i2s-controller = <&tegra_i2s1>; - nvidia,audio-codec = <&wm8903>; - - nvidia,spkr-en-gpios = <&wm8903 2 0>; - nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ - }; -}; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..d10c9c5a3606df6fe6923a64557cc7e749015d1b --- /dev/null +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -0,0 +1,475 @@ +/include/ "tegra30.dtsi" + +/** + * This file contains common DT entry for all fab version of Cardhu. + * There is multiple fab version of Cardhu starting from A01 to A07. + * Cardhu fab version A01 and A03 are not supported. Cardhu fab version + * A02 will have different sets of GPIOs for fixed regulator compare to + * Cardhu fab version A04. The Cardhu fab version A05, A06, A07 are + * compatible with fab version A04. Based on Cardhu fab version, the + * related dts file need to be chosen like for Cardhu fab version A02, + * use tegra30-cardhu-a02.dts, Cardhu fab version A04 and later, use + * tegra30-cardhu-a04.dts. + * The identification of board is done in two ways, by looking the sticker + * on PCB and by reading board id eeprom. + * The stciker will have number like 600-81291-1000-002 C.3. In this 4th + * number is the fab version like here it is 002 and hence fab version A02. + * The (downstream internal) U-Boot of Cardhu display the board-id as + * follows: + * BoardID: 0C5B, SKU: 0A01, Fab: 02, Rev: 45.00 + * In this Fab version is 02 i.e. A02. + * The BoardID I2C eeprom is interfaced through i2c5 (pwr_i2c address 0x56). + * The location 0x8 of this eeprom contains the Fab version. It is 1 byte + * wide. + */ + +/ { + model = "NVIDIA Tegra30 Cardhu evaluation board"; + compatible = "nvidia,cardhu", "nvidia,tegra30"; + + memory { + reg = <0x80000000 0x40000000>; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + dap2_fs_pa2 { + nvidia,pins = "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5"; + nvidia,function = "i2s1"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + }; + }; + + serial@70006000 { + status = "okay"; + clock-frequency = <408000000>; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + + /* ALS and Proximity sensor */ + isl29028@44 { + compatible = "isil,isl29028"; + reg = <0x44>; + interrupt-parent = <&gpio>; + interrupts = <88 0x04>; /*gpio PL0 */ + }; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + wm8903: wm8903@1a { + compatible = "wlf,wm8903"; + reg = <0x1a>; + interrupt-parent = <&gpio>; + interrupts = <179 0x04>; /* gpio PW3 */ + + gpio-controller; + #gpio-cells = <2>; + + micdet-cfg = <0>; + micdet-delay = <100>; + gpio-cfg = <0xffffffff 0xffffffff 0 0xffffffff 0xffffffff>; + }; + + tps62361 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + }; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = <0 86 0x4>; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&vdd_ac_bat_reg>; + vcc2-supply = <&vdd_ac_bat_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&vdd_5v0_reg>; + vcc5-supply = <&vdd_ac_bat_reg>; + vcc6-supply = <&vdd2_reg>; + vcc7-supply = <&vdd_ac_bat_reg>; + vccio-supply = <&vdd_ac_bat_reg>; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vdd1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "vdd1"; + regulator-name = "vddio_ddr_1v2"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "vdd2"; + regulator-name = "vdd_1v5_gen"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + }; + + vddctrl_reg: regulator@2 { + reg = <2>; + regulator-compatible = "vddctrl"; + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vio_reg: regulator@3 { + reg = <3>; + regulator-compatible = "vio"; + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo1_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo1"; + regulator-name = "vdd_pexa,vdd_pexb"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo2_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo2"; + regulator-name = "vdd_sata,avdd_plle"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* LDO3 is not connected to anything */ + + ldo4_reg: regulator@7 { + reg = <7>; + regulator-compatible = "ldo4"; + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo5_reg: regulator@8 { + reg = <8>; + regulator-compatible = "ldo5"; + regulator-name = "vddio_sdmmc,avdd_vdac"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo6_reg: regulator@9 { + reg = <9>; + regulator-compatible = "ldo6"; + regulator-name = "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo7_reg: regulator@10 { + reg = <10>; + regulator-compatible = "ldo7"; + regulator-name = "vdd_pllm,x,u,a_p_c_s"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo8_reg: regulator@11 { + reg = <11>; + regulator-compatible = "ldo8"; + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + }; + + ahub { + i2s@70080400 { + status = "okay"; + }; + }; + + pmc { + status = "okay"; + nvidia,invert-interrupt; + }; + + sdhci@78000000 { + status = "okay"; + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 155 0>; /* gpio PT3 */ + power-gpios = <&gpio 31 0>; /* gpio PD7 */ + bus-width = <4>; + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_ac_bat_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + cam_1v8_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "cam_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + enable-active-high; + gpio = <&gpio 220 0>; /* gpio PBB4 */ + vin-supply = <&vio_reg>; + }; + + cp_5v_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "cp_5v"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + regulator-always-on; + enable-active-high; + gpio = <&pmic 0 0>; /* PMIC TPS65911 GPIO0 */ + }; + + emmc_3v3_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "emmc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 25 0>; /* gpio PD1 */ + vin-supply = <&sys_3v3_reg>; + }; + + modem_3v3_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "modem_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 30 0>; /* gpio PD6 */ + }; + + pex_hvdd_3v3_reg: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "pex_hvdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 95 0>; /* gpio PL7 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam1_ldo_reg: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "vdd_cam1_ldo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&gpio 142 0>; /* gpio PR6 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam2_ldo_reg: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "vdd_cam2_ldo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + enable-active-high; + gpio = <&gpio 143 0>; /* gpio PR7 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_cam3_ldo_reg: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "vdd_cam3_ldo"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 144 0>; /* gpio PS0 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_com_reg: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "vdd_com"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 24 0>; /* gpio PD0 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_fuse_3v3_reg: regulator@10 { + compatible = "regulator-fixed"; + reg = <10>; + regulator-name = "vdd_fuse_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&gpio 94 0>; /* gpio PL6 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_pnl1_reg: regulator@11 { + compatible = "regulator-fixed"; + reg = <11>; + regulator-name = "vdd_pnl1"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&gpio 92 0>; /* gpio PL4 */ + vin-supply = <&sys_3v3_reg>; + }; + + vdd_vid_reg: regulator@12 { + compatible = "regulator-fixed"; + reg = <12>; + regulator-name = "vddio_vid"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio 152 0>; /* GPIO PT0 */ + gpio-open-drain; + vin-supply = <&vdd_5v0_reg>; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-wm8903-cardhu", + "nvidia,tegra-audio-wm8903"; + nvidia,model = "NVIDIA Tegra Cardhu"; + + nvidia,audio-routing = + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "Int Spk", "ROP", + "Int Spk", "RON", + "Int Spk", "LOP", + "Int Spk", "LON", + "Mic Jack", "MICBIAS", + "IN1L", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&wm8903>; + + nvidia,spkr-en-gpios = <&wm8903 2 0>; + nvidia,hp-det-gpios = <&gpio 178 0>; /* gpio PW2 */ + }; +}; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 3e4334d14efb4d70bdd88e46c44dc4b6af1e7cf2..b1497c7d7d6851db3753c1210e974cb9e47888c2 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -117,7 +117,7 @@ status = "disabled"; }; - pwm { + pwm: pwm { compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; diff --git a/arch/arm/boot/dts/tps65217.dtsi b/arch/arm/boot/dts/tps65217.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..a63272422d769363d3cdc2c5d7b76d870b091d12 --- /dev/null +++ b/arch/arm/boot/dts/tps65217.dtsi @@ -0,0 +1,56 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65217.pdf + */ + +&tps { + compatible = "ti,tps65217"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "dcdc1"; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "dcdc2"; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + regulator-compatible = "dcdc3"; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-compatible = "ldo1"; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo2"; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo3"; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-compatible = "ldo4"; + }; + }; +}; diff --git a/arch/arm/boot/dts/tps65910.dtsi b/arch/arm/boot/dts/tps65910.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..92693a89160e3714b3bbaadd9b4d19db35d1e422 --- /dev/null +++ b/arch/arm/boot/dts/tps65910.dtsi @@ -0,0 +1,86 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Integrated Power Management Chip + * http://www.ti.com/lit/ds/symlink/tps65910.pdf + */ + +&tps { + compatible = "ti,tps65910"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + vrtc_reg: regulator@0 { + reg = <0>; + regulator-compatible = "vrtc"; + }; + + vio_reg: regulator@1 { + reg = <1>; + regulator-compatible = "vio"; + }; + + vdd1_reg: regulator@2 { + reg = <2>; + regulator-compatible = "vdd1"; + }; + + vdd2_reg: regulator@3 { + reg = <3>; + regulator-compatible = "vdd2"; + }; + + vdd3_reg: regulator@4 { + reg = <4>; + regulator-compatible = "vdd3"; + }; + + vdig1_reg: regulator@5 { + reg = <5>; + regulator-compatible = "vdig1"; + }; + + vdig2_reg: regulator@6 { + reg = <6>; + regulator-compatible = "vdig2"; + }; + + vpll_reg: regulator@7 { + reg = <7>; + regulator-compatible = "vpll"; + }; + + vdac_reg: regulator@8 { + reg = <8>; + regulator-compatible = "vdac"; + }; + + vaux1_reg: regulator@9 { + reg = <9>; + regulator-compatible = "vaux1"; + }; + + vaux2_reg: regulator@10 { + reg = <10>; + regulator-compatible = "vaux2"; + }; + + vaux33_reg: regulator@11 { + reg = <11>; + regulator-compatible = "vaux33"; + }; + + vmmc_reg: regulator@12 { + reg = <12>; + regulator-compatible = "vmmc"; + }; + }; +}; diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi index 22f4d1394ed351905f24de4b88c4fec67fea71d9..ff000172c93c42306c42fb15446b378a24596ed4 100644 --- a/arch/arm/boot/dts/twl4030.dtsi +++ b/arch/arm/boot/dts/twl4030.dtsi @@ -19,19 +19,19 @@ interrupts = <11>; }; - vdac: regulator@0 { + vdac: regulator-vdac { compatible = "ti,twl4030-vdac"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vpll2: regulator@1 { + vpll2: regulator-vpll2 { compatible = "ti,twl4030-vpll2"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; }; - vmmc1: regulator@2 { + vmmc1: regulator-vmmc1 { compatible = "ti,twl4030-vmmc1"; regulator-min-microvolt = <1850000>; regulator-max-microvolt = <3150000>; diff --git a/arch/arm/boot/dts/twl6030.dtsi b/arch/arm/boot/dts/twl6030.dtsi index 3b2f3510d7eb91ca5ce520692682ad26aca89d31..123e2c40218a4385361d6175d5259a77cb46199a 100644 --- a/arch/arm/boot/dts/twl6030.dtsi +++ b/arch/arm/boot/dts/twl6030.dtsi @@ -20,67 +20,70 @@ interrupts = <11>; }; - vaux1: regulator@0 { + vaux1: regulator-vaux1 { compatible = "ti,twl6030-vaux1"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; }; - vaux2: regulator@1 { + vaux2: regulator-vaux2 { compatible = "ti,twl6030-vaux2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <2800000>; }; - vaux3: regulator@2 { + vaux3: regulator-vaux3 { compatible = "ti,twl6030-vaux3"; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3000000>; }; - vmmc: regulator@3 { + vmmc: regulator-vmmc { compatible = "ti,twl6030-vmmc"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3000000>; }; - vpp: regulator@4 { + vpp: regulator-vpp { compatible = "ti,twl6030-vpp"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <2500000>; }; - vusim: regulator@5 { + vusim: regulator-vusim { compatible = "ti,twl6030-vusim"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <2900000>; }; - vdac: regulator@6 { + vdac: regulator-vdac { compatible = "ti,twl6030-vdac"; }; - vana: regulator@7 { + vana: regulator-vana { compatible = "ti,twl6030-vana"; }; - vcxio: regulator@8 { + vcxio: regulator-vcxio { compatible = "ti,twl6030-vcxio"; + regulator-always-on; }; - vusb: regulator@9 { + vusb: regulator-vusb { compatible = "ti,twl6030-vusb"; }; - v1v8: regulator@10 { + v1v8: regulator-v1v8 { compatible = "ti,twl6030-v1v8"; + regulator-always-on; }; - v2v1: regulator@11 { + v2v1: regulator-v2v1 { compatible = "ti,twl6030-v2v1"; + regulator-always-on; }; - clk32kg: regulator@12 { + clk32kg: regulator-clk32kg { compatible = "ti,twl6030-clk32kg"; }; }; diff --git a/arch/arm/boot/dts/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500-bv07.dts new file mode 100644 index 0000000000000000000000000000000000000000..567cf4e8ab84e49551667e8f68f986675b15a1a7 --- /dev/null +++ b/arch/arm/boot/dts/vt8500-bv07.dts @@ -0,0 +1,36 @@ +/* + * vt8500-bv07.dts - Device tree file for Benign BV07 Netbook + * + * Copyright (C) 2012 Tony Prisk + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "vt8500.dtsi" + +/ { + model = "Benign BV07 Netbook"; + + /* + * Display node is based on Sascha Hauer's patch on dri-devel. + * Added a bpp property to calculate the size of the framebuffer + * until the binding is formalized. + */ + display: display@0 { + modes { + mode0: mode@0 { + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + clock = <0>; /* unused but required */ + bpp = <16>; /* non-standard but required */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/vt8500.dtsi b/arch/arm/boot/dts/vt8500.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..d8645e990b21a023c1535c43c656f5b1250d6dec --- /dev/null +++ b/arch/arm/boot/dts/vt8500.dtsi @@ -0,0 +1,116 @@ +/* + * vt8500.dtsi - Device tree file for VIA VT8500 SoC + * + * Copyright (C) 2012 Tony Prisk + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "via,vt8500"; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&intc>; + + intc: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; + + gpio: gpio-controller@d8110000 { + compatible = "via,vt8500-gpio"; + gpio-controller; + reg = <0xd8110000 0x10000>; + #gpio-cells = <3>; + }; + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ref24: ref24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + }; + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; + + ehci@d8007900 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007900 0x200>; + interrupts = <43>; + }; + + uhci@d8007b00 { + compatible = "platform-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <43>; + }; + + fb@d800e400 { + compatible = "via,vt8500-fb"; + reg = <0xd800e400 0x400>; + interrupts = <12>; + display = <&display>; + default-mode = <&mode0>; + }; + + ge_rops@d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + }; + + uart@d8200000 { + compatible = "via,vt8500-uart"; + reg = <0xd8200000 0x1040>; + interrupts = <32>; + clocks = <&ref24>; + }; + + uart@d82b0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82b0000 0x1040>; + interrupts = <33>; + clocks = <&ref24>; + }; + + uart@d8210000 { + compatible = "via,vt8500-uart"; + reg = <0xd8210000 0x1040>; + interrupts = <47>; + clocks = <&ref24>; + }; + + uart@d82c0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82c0000 0x1040>; + interrupts = <50>; + clocks = <&ref24>; + }; + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8505-ref.dts b/arch/arm/boot/dts/wm8505-ref.dts new file mode 100644 index 0000000000000000000000000000000000000000..fd4e248074c676a43d965338f210f1e3ea6fa673 --- /dev/null +++ b/arch/arm/boot/dts/wm8505-ref.dts @@ -0,0 +1,36 @@ +/* + * wm8505-ref.dts - Device tree file for Wondermedia WM8505 reference netbook + * + * Copyright (C) 2012 Tony Prisk + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "wm8505.dtsi" + +/ { + model = "Wondermedia WM8505 Netbook"; + + /* + * Display node is based on Sascha Hauer's patch on dri-devel. + * Added a bpp property to calculate the size of the framebuffer + * until the binding is formalized. + */ + display: display@0 { + modes { + mode0: mode@0 { + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + clock = <0>; /* unused but required */ + bpp = <32>; /* non-standard but required */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8505.dtsi b/arch/arm/boot/dts/wm8505.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..b459691655ab653182817134a5b358696bab18d8 --- /dev/null +++ b/arch/arm/boot/dts/wm8505.dtsi @@ -0,0 +1,143 @@ +/* + * wm8505.dtsi - Device tree file for Wondermedia WM8505 SoC + * + * Copyright (C) 2012 Tony Prisk + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "wm,wm8505"; + + cpus { + cpu@0 { + compatible = "arm,arm926ejs"; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&intc0>; + + intc0: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; + + /* Secondary IC cascaded to intc0 */ + intc1: interrupt-controller@d8150000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xD8150000 0x10000>; + interrupts = <56 57 58 59 60 61 62 63>; + }; + + gpio: gpio-controller@d8110000 { + compatible = "wm,wm8505-gpio"; + gpio-controller; + reg = <0xd8110000 0x10000>; + #gpio-cells = <3>; + }; + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ref24: ref24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + }; + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; + + ehci@d8007100 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007100 0x200>; + interrupts = <43>; + }; + + uhci@d8007300 { + compatible = "platform-uhci"; + reg = <0xd8007300 0x200>; + interrupts = <43>; + }; + + fb@d8050800 { + compatible = "wm,wm8505-fb"; + reg = <0xd8050800 0x200>; + display = <&display>; + default-mode = <&mode0>; + }; + + ge_rops@d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + }; + + uart@d8200000 { + compatible = "via,vt8500-uart"; + reg = <0xd8200000 0x1040>; + interrupts = <32>; + clocks = <&ref24>; + }; + + uart@d82b0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82b0000 0x1040>; + interrupts = <33>; + clocks = <&ref24>; + }; + + uart@d8210000 { + compatible = "via,vt8500-uart"; + reg = <0xd8210000 0x1040>; + interrupts = <47>; + clocks = <&ref24>; + }; + + uart@d82c0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82c0000 0x1040>; + interrupts = <50>; + clocks = <&ref24>; + }; + + uart@d8370000 { + compatible = "via,vt8500-uart"; + reg = <0xd8370000 0x1040>; + interrupts = <31>; + clocks = <&ref24>; + }; + + uart@d8380000 { + compatible = "via,vt8500-uart"; + reg = <0xd8380000 0x1040>; + interrupts = <30>; + clocks = <&ref24>; + }; + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8650-mid.dts b/arch/arm/boot/dts/wm8650-mid.dts new file mode 100644 index 0000000000000000000000000000000000000000..cefd938f842fe6192e90a2c244b05730c11383a5 --- /dev/null +++ b/arch/arm/boot/dts/wm8650-mid.dts @@ -0,0 +1,36 @@ +/* + * wm8650-mid.dts - Device tree file for Wondermedia WM8650-MID Tablet + * + * Copyright (C) 2012 Tony Prisk + * + * Licensed under GPLv2 or later + */ + +/dts-v1/; +/include/ "wm8650.dtsi" + +/ { + model = "Wondermedia WM8650-MID Tablet"; + + /* + * Display node is based on Sascha Hauer's patch on dri-devel. + * Added a bpp property to calculate the size of the framebuffer + * until the binding is formalized. + */ + display: display@0 { + modes { + mode0: mode@0 { + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hfront-porch = <40>; + hsync-len = <0>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <1>; + clock = <0>; /* unused but required */ + bpp = <16>; /* non-standard but required */ + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..83b9467559bba0552fc6ec0ddb7c63a1a4f7cc6e --- /dev/null +++ b/arch/arm/boot/dts/wm8650.dtsi @@ -0,0 +1,147 @@ +/* + * wm8650.dtsi - Device tree file for Wondermedia WM8650 SoC + * + * Copyright (C) 2012 Tony Prisk + * + * Licensed under GPLv2 or later + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "wm,wm8650"; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + interrupt-parent = <&intc0>; + + intc0: interrupt-controller@d8140000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + reg = <0xd8140000 0x10000>; + #interrupt-cells = <1>; + }; + + /* Secondary IC cascaded to intc0 */ + intc1: interrupt-controller@d8150000 { + compatible = "via,vt8500-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xD8150000 0x10000>; + interrupts = <56 57 58 59 60 61 62 63>; + }; + + gpio: gpio-controller@d8110000 { + compatible = "wm,wm8650-gpio"; + gpio-controller; + reg = <0xd8110000 0x10000>; + #gpio-cells = <3>; + }; + + pmc@d8130000 { + compatible = "via,vt8500-pmc"; + reg = <0xd8130000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ref25: ref25M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + }; + + ref24: ref24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + plla: plla { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x200>; + }; + + pllb: pllb { + #clock-cells = <0>; + compatible = "wm,wm8650-pll-clock"; + clocks = <&ref25>; + reg = <0x204>; + }; + + arm: arm { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&plla>; + divisor-reg = <0x300>; + }; + + sdhc: sdhc { + #clock-cells = <0>; + compatible = "via,vt8500-device-clock"; + clocks = <&pllb>; + divisor-reg = <0x328>; + divisor-mask = <0x3f>; + enable-reg = <0x254>; + enable-bit = <18>; + }; + }; + }; + + timer@d8130100 { + compatible = "via,vt8500-timer"; + reg = <0xd8130100 0x28>; + interrupts = <36>; + }; + + ehci@d8007900 { + compatible = "via,vt8500-ehci"; + reg = <0xd8007900 0x200>; + interrupts = <43>; + }; + + uhci@d8007b00 { + compatible = "platform-uhci"; + reg = <0xd8007b00 0x200>; + interrupts = <43>; + }; + + fb@d8050800 { + compatible = "wm,wm8505-fb"; + reg = <0xd8050800 0x200>; + display = <&display>; + default-mode = <&mode0>; + }; + + ge_rops@d8050400 { + compatible = "wm,prizm-ge-rops"; + reg = <0xd8050400 0x100>; + }; + + uart@d8200000 { + compatible = "via,vt8500-uart"; + reg = <0xd8200000 0x1040>; + interrupts = <32>; + clocks = <&ref24>; + }; + + uart@d82b0000 { + compatible = "via,vt8500-uart"; + reg = <0xd82b0000 0x1040>; + interrupts = <33>; + clocks = <&ref24>; + }; + + rtc@d8100000 { + compatible = "via,vt8500-rtc"; + reg = <0xd8100000 0x10000>; + interrupts = <48>; + }; + }; +}; diff --git a/arch/arm/boot/dts/xenvm-4.2.dts b/arch/arm/boot/dts/xenvm-4.2.dts new file mode 100644 index 0000000000000000000000000000000000000000..ec3f9528e180c75e42b633104fb537ced0762691 --- /dev/null +++ b/arch/arm/boot/dts/xenvm-4.2.dts @@ -0,0 +1,68 @@ +/* + * Xen Virtual Machine for unprivileged guests + * + * Based on ARM Ltd. Versatile Express CoreTile Express (single CPU) + * Cortex-A15 MPCore (V2P-CA15) + * + */ + +/dts-v1/; + +/ { + model = "XENVM-4.2"; + compatible = "xen,xenvm-4.2", "xen,xenvm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { + /* this field is going to be adjusted by the hypervisor */ + bootargs = "console=hvc0 root=/dev/xvda"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* this field is going to be adjusted by the hypervisor */ + reg = <0 0x80000000 0 0x08000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x100>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + hypervisor { + compatible = "xen,xen-4.2", "xen,xen"; + /* this field is going to be adjusted by the hypervisor */ + reg = <0 0xb0000000 0 0x20000>; + /* this field is going to be adjusted by the hypervisor */ + interrupts = <1 15 0xf08>; + }; + + motherboard { + arm,v2m-memory-map = "rs1"; + }; +}; diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig index 2afdf67c2127184c335763aa845dd0fbb8a6558f..c285a9d777d933847a4ec3c9d8bf3e00ba2c18a5 100644 --- a/arch/arm/configs/afeb9260_defconfig +++ b/arch/arm/configs/afeb9260_defconfig @@ -39,7 +39,6 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_ATMEL_SSC=y diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 7d8718468e0dff1ec28b63014f6c56ec62650d10..f78d259f8d23d900d4a2abb6461f8921ce74389c 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -33,7 +33,7 @@ CONFIG_AEABI=y CONFIG_FORCE_MAX_ZONEORDER=13 CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096" +CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw" CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y CONFIG_VFP=y @@ -85,6 +85,7 @@ CONFIG_SERIAL_SH_SCI_NR_UARTS=8 CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y +CONFIG_I2C_GPIO=y CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set CONFIG_MEDIA_SUPPORT=y @@ -120,6 +121,8 @@ CONFIG_USB_ETH=m CONFIG_MMC=y CONFIG_MMC_SDHI=y CONFIG_MMC_SH_MMCIF=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_S35390A=y CONFIG_DMADEVICES=y CONFIG_SH_DMAE=y CONFIG_UIO=y diff --git a/arch/arm/configs/at91rm9200_defconfig b/arch/arm/configs/at91rm9200_defconfig index d54e2acd3ab16616814feaa1fcdbf9e712be5e9d..4ae57a34a582b704d9484bd41ec37fc49ac2f2e2 100644 --- a/arch/arm/configs/at91rm9200_defconfig +++ b/arch/arm/configs/at91rm9200_defconfig @@ -232,7 +232,7 @@ CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_USB_MASS_STORAGE=m CONFIG_MMC=y -CONFIG_MMC_AT91=y +CONFIG_MMC_ATMELMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/configs/at91sam9261_defconfig b/arch/arm/configs/at91sam9261_defconfig index ade6b2f231164b00c1fc22ede4866e47d2aee485..1e8712ef062e42733552cd948810b4b984e2e5d1 100644 --- a/arch/arm/configs/at91sam9261_defconfig +++ b/arch/arm/configs/at91sam9261_defconfig @@ -128,7 +128,7 @@ CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y -CONFIG_MMC_AT91=m +CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/configs/at91sam9263_defconfig b/arch/arm/configs/at91sam9263_defconfig index 1cf96264cba1456ad4a7ae54daeb414479c3e684..d2050cada82d650334de0b44523efe6a5bcc1159 100644 --- a/arch/arm/configs/at91sam9263_defconfig +++ b/arch/arm/configs/at91sam9263_defconfig @@ -61,7 +61,6 @@ CONFIG_MTD_DATAFLASH=y CONFIG_MTD_BLOCK2MTD=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y CONFIG_MTD_UBI=y CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y @@ -138,7 +137,7 @@ CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y CONFIG_SDIO_UART=m -CONFIG_MMC_AT91=m +CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_ATMEL_PWM=y diff --git a/arch/arm/configs/at91sam9g20_defconfig b/arch/arm/configs/at91sam9g20_defconfig index 994d331b231956b0edd5d6e01a773beeda32fa60..e1b0e80b54a5693b792bfe2acaceb9be695c1c86 100644 --- a/arch/arm/configs/at91sam9g20_defconfig +++ b/arch/arm/configs/at91sam9g20_defconfig @@ -99,7 +99,7 @@ CONFIG_USB_GADGETFS=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y -CONFIG_MMC_AT91=m +CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/configs/at91sam9rl_defconfig b/arch/arm/configs/at91sam9rl_defconfig index ad562ee64209cd08e57f9b31160c089b810d7c11..7cf87856d63ca2738112d59f336f615ec3ce36d5 100644 --- a/arch/arm/configs/at91sam9rl_defconfig +++ b/arch/arm/configs/at91sam9rl_defconfig @@ -60,7 +60,7 @@ CONFIG_AT91SAM9X_WATCHDOG=y CONFIG_FB=y CONFIG_FB_ATMEL=y CONFIG_MMC=y -CONFIG_MMC_AT91=m +CONFIG_MMC_ATMELMCI=m CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AT91SAM9=y CONFIG_EXT2_FS=y diff --git a/arch/arm/configs/bcm2835_defconfig b/arch/arm/configs/bcm2835_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..7aea70253c6341fbdcfb34cb42603ff32ff6227a --- /dev/null +++ b/arch/arm/configs/bcm2835_defconfig @@ -0,0 +1,95 @@ +CONFIG_EXPERIMENTAL=y +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_BSD_PROCESS_ACCT_V3=y +CONFIG_FHANDLE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_LOG_BUF_SHIFT=18 +CONFIG_CGROUP_FREEZER=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CPUSETS=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_CGROUP_PERF=y +CONFIG_CFS_BANDWIDTH=y +CONFIG_RT_GROUP_SCHED=y +CONFIG_NAMESPACES=y +CONFIG_SCHED_AUTOGROUP=y +CONFIG_RELAY=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_RD_BZIP2=y +CONFIG_RD_LZMA=y +CONFIG_RD_XZ=y +CONFIG_RD_LZO=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_KALLSYMS_ALL=y +CONFIG_EMBEDDED=y +# CONFIG_COMPAT_BRK is not set +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_JUMP_LABEL=y +# CONFIG_BLOCK is not set +CONFIG_ARCH_BCM2835=y +CONFIG_PREEMPT_VOLUNTARY=y +CONFIG_AEABI=y +CONFIG_COMPACTION=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=65536 +CONFIG_CLEANCACHE=y +CONFIG_SECCOMP=y +CONFIG_CC_STACKPROTECTOR=y +CONFIG_KEXEC=y +CONFIG_CRASH_DUMP=y +CONFIG_VFP=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +# CONFIG_SUSPEND is not set +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_SERIO is not set +# CONFIG_VT is not set +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_DEVKMEM is not set +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_TTY_PRINTK=y +# CONFIG_HW_RANDOM is not set +# CONFIG_HWMON is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_IOMMU_SUPPORT is not set +# CONFIG_FILE_LOCKING is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +# CONFIG_PROC_FS is not set +# CONFIG_SYSFS is not set +# CONFIG_MISC_FILESYSTEMS is not set +CONFIG_PRINTK_TIME=y +# CONFIG_ENABLE_WARN_DEPRECATED is not set +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_UNUSED_SYMBOLS=y +CONFIG_LOCKUP_DETECTOR=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_MEMORY_INIT=y +CONFIG_BOOT_PRINTK_DELAY=y +CONFIG_SCHED_TRACER=y +CONFIG_STACK_TRACER=y +CONFIG_FUNCTION_PROFILER=y +CONFIG_DYNAMIC_DEBUG=y +CONFIG_KGDB=y +CONFIG_KGDB_KDB=y +CONFIG_TEST_KSTRTOX=y +CONFIG_STRICT_DEVMEM=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +# CONFIG_XZ_DEC_X86 is not set +# CONFIG_XZ_DEC_POWERPC is not set +# CONFIG_XZ_DEC_IA64 is not set +# CONFIG_XZ_DEC_ARM is not set +# CONFIG_XZ_DEC_ARMTHUMB is not set +# CONFIG_XZ_DEC_SPARC is not set diff --git a/arch/arm/configs/bcmring_defconfig b/arch/arm/configs/bcmring_defconfig deleted file mode 100644 index 6c389d94db71ba59db4fc47cef995b50e7e2ac1c..0000000000000000000000000000000000000000 --- a/arch/arm/configs/bcmring_defconfig +++ /dev/null @@ -1,78 +0,0 @@ -CONFIG_EXPERIMENTAL=y -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -CONFIG_SYSVIPC=y -CONFIG_EXPERT=y -CONFIG_KALLSYMS_EXTRA_PASS=y -# CONFIG_HOTPLUG is not set -# CONFIG_ELF_CORE is not set -# CONFIG_EPOLL is not set -# CONFIG_SIGNALFD is not set -# CONFIG_TIMERFD is not set -# CONFIG_EVENTFD is not set -# CONFIG_AIO is not set -CONFIG_PERF_EVENTS=y -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set -# CONFIG_COMPAT_BRK is not set -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_BCMRING=y -CONFIG_BCM_ZRELADDR=0x8000 -CONFIG_CPU_32v6K=y -CONFIG_NO_HZ=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_UACCESS_WITH_MEMCPY=y -CONFIG_ZBOOT_ROM_TEXT=0x0e000000 -CONFIG_ZBOOT_ROM_BSS=0x0ea00000 -CONFIG_ZBOOT_ROM=y -CONFIG_NET=y -# CONFIG_WIRELESS is not set -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_CFI_I2 is not set -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_BCM_UMI=y -CONFIG_MTD_NAND_BCM_UMI_HWCS=y -# CONFIG_MISC_DEVICES is not set -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_CONSOLE_TRANSLATIONS is not set -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_AMBA_PL011=y -CONFIG_SERIAL_AMBA_PL011_CONSOLE=y -CONFIG_LEGACY_PTY_COUNT=64 -# CONFIG_HW_RANDOM is not set -# CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_FILE_LOCKING is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -# CONFIG_PROC_PAGE_MONITOR is not set -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_SUMMARY=y -CONFIG_JFFS2_FS_XATTR=y -# CONFIG_JFFS2_FS_SECURITY is not set -# CONFIG_NETWORK_FILESYSTEMS is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_HEADERS_CHECK=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -# CONFIG_ARM_UNWIND is not set diff --git a/arch/arm/configs/cpu9260_defconfig b/arch/arm/configs/cpu9260_defconfig index bbf729e2fb6f3f353588af389fffb929531d9aa8..921480c23b9813b8274d38cace24c6ea46961f05 100644 --- a/arch/arm/configs/cpu9260_defconfig +++ b/arch/arm/configs/cpu9260_defconfig @@ -82,7 +82,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_MMC=y -CONFIG_MMC_AT91=m +CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/configs/cpu9g20_defconfig b/arch/arm/configs/cpu9g20_defconfig index e7d7942927f388e4f794af9f61ee0539980dd8bc..ea116cbdffa1c7f9f60ac466fec45388094fc577 100644 --- a/arch/arm/configs/cpu9g20_defconfig +++ b/arch/arm/configs/cpu9g20_defconfig @@ -82,7 +82,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_MMC=y -CONFIG_MMC_AT91=m +CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 3c9f32f9b6b4dc6e5b77884deaa216c87684919c..66aa7a6db884c14668be9f20a6d27166c85a8c1f 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -32,9 +32,7 @@ CONFIG_MACH_VPR200=y CONFIG_MACH_IMX51_DT=y CONFIG_MACH_MX51_3DS=y CONFIG_MACH_EUKREA_CPUIMX51SD=y -CONFIG_MACH_MX51_EFIKAMX=y -CONFIG_MACH_MX51_EFIKASB=y -CONFIG_MACH_IMX53_DT=y +CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_MXC_PWM=y CONFIG_SMP=y @@ -42,7 +40,6 @@ CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_DEFAULT_MMAP_MIN_ADDR=32768 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" CONFIG_VFP=y CONFIG_NEON=y @@ -179,6 +176,9 @@ CONFIG_SND_SOC_IMX_MC13783=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_MXS_PHY=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index aeb3af541fedc8bf1b31f25a712426bb38ed5af8..74eee0c78f283dddb7ef36e37d95baf849860870 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,5 +1,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=19 CONFIG_PROFILING=y CONFIG_OPROFILE=y @@ -15,9 +17,19 @@ CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_ESATA_SHEEVAPLUG=y CONFIG_MACH_GURUPLUG=y -CONFIG_MACH_DOCKSTAR=y +CONFIG_MACH_DREAMPLUG_DT=y +CONFIG_MACH_ICONNECT_DT=y +CONFIG_MACH_DLINK_KIRKWOOD_DT=y +CONFIG_MACH_IB62X0_DT=y +CONFIG_MACH_TS219_DT=y +CONFIG_MACH_DOCKSTAR_DT=y +CONFIG_MACH_GOFLEXNET_DT=y +CONFIG_MACH_LSXL_DT=y +CONFIG_MACH_IOMEGA_IX2_200_DT=y +CONFIG_MACH_KM_KIRKWOOD_DT=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y +CONFIG_MACH_DOCKSTAR=y CONFIG_MACH_OPENRD_BASE=y CONFIG_MACH_OPENRD_CLIENT=y CONFIG_MACH_OPENRD_ULTIMATE=y @@ -29,8 +41,6 @@ CONFIG_MACH_NET2BIG_V2=y CONFIG_MACH_NET5BIG_V2=y CONFIG_MACH_T5325=y # CONFIG_CPU_FEROCEON_OLD_ID is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set @@ -47,13 +57,11 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_NET_PKTGEN=m CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -69,7 +77,6 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ORION=y CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m @@ -78,22 +85,21 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_NET_PCI=y +CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_MV643XX_ETH=y -# CONFIG_NETDEV_10000 is not set +CONFIG_MARVELL_PHY=y CONFIG_LIBERTAS=y CONFIG_LIBERTAS_SDIO=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set +CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set @@ -103,7 +109,8 @@ CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set +CONFIG_WATCHDOG=y +CONFIG_ORION_WATCHDOG=y CONFIG_HID_DRAGONRISE=y CONFIG_HID_GYRATION=y CONFIG_HID_TWINHAN=y @@ -119,10 +126,8 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DATAFAB=y @@ -148,7 +153,6 @@ CONFIG_MV_XOR=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -158,7 +162,6 @@ CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y @@ -171,11 +174,8 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m diff --git a/arch/arm/configs/kzm9d_defconfig b/arch/arm/configs/kzm9d_defconfig index 26146ffea1a50d2860ffcc2b647da7ea8c8a3bcb..8c49df66cac3401d73d71fd41ad573259b3de036 100644 --- a/arch/arm/configs/kzm9d_defconfig +++ b/arch/arm/configs/kzm9d_defconfig @@ -8,6 +8,7 @@ CONFIG_LOG_BUF_SHIFT=16 CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y CONFIG_SLAB=y # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set diff --git a/arch/arm/configs/kzm9g_defconfig b/arch/arm/configs/kzm9g_defconfig index 2388c86106277dccb08e0c24820a6e4a0a733630..c88b57886e791906f8f21459df939718a95be0b6 100644 --- a/arch/arm/configs/kzm9g_defconfig +++ b/arch/arm/configs/kzm9g_defconfig @@ -14,6 +14,7 @@ CONFIG_NAMESPACES=y CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y +CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_MODULES=y CONFIG_MODULE_FORCE_LOAD=y @@ -22,7 +23,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_SHMOBILE=y -CONFIG_KEYBOARD_GPIO_POLLED=y CONFIG_ARCH_SH73A0=y CONFIG_MACH_KZM9G=y CONFIG_MEMORY_START=0x41000000 @@ -70,6 +70,7 @@ CONFIG_INPUT_SPARSEKMAP=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y # CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ST1232=y diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index e42a0e3d4c3a6466375e492eaf5759c0cc0bff30..92386b20bd096cf27a9410c29e8e8822d2554964 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -133,7 +133,6 @@ CONFIG_SND_DEBUG_VERBOSE=y # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set CONFIG_SND_SOC=y -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y @@ -149,6 +148,7 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_PCA9532=y CONFIG_LEDS_PCA9532_GPIO=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y @@ -161,10 +161,13 @@ CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_LPC32XX=y CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y CONFIG_STAGING=y CONFIG_LPC32XX_ADC=y -CONFIG_MAX517=y CONFIG_IIO=y +CONFIG_MAX517=y +CONFIG_PWM=y +CONFIG_PWM_LPC32XX=y CONFIG_EXT2_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index 864f9a5c39dd218c00ed6757702f522e1e8504ee..53382b6c8bb43345ae75b8f1ea39ab509d161980 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -1,13 +1,14 @@ # CONFIG_ARM_PATCH_PHYS_VIRT is not set CONFIG_EXPERIMENTAL=y CONFIG_KERNEL_LZMA=y +CONFIG_NO_HZ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y -# CONFIG_BLOCK is not set +# CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_SHMOBILE=y CONFIG_ARCH_R8A7779=y CONFIG_MACH_MARZEN=y @@ -21,7 +22,6 @@ CONFIG_ARM_ERRATA_458693=y CONFIG_ARM_ERRATA_460075=y CONFIG_ARM_ERRATA_743622=y CONFIG_ARM_ERRATA_754322=y -CONFIG_NO_HZ=y CONFIG_SMP=y # CONFIG_ARM_CPU_TOPOLOGY is not set CONFIG_AEABI=y @@ -29,13 +29,16 @@ CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel" +CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on" CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM_RUNTIME=y CONFIG_NET=y +CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" @@ -68,17 +71,21 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_RCAR_THERMAL=y CONFIG_SSB=y -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +CONFIG_MMC_SDHI=y CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_IOMMU_SUPPORT is not set -# CONFIG_FILE_LOCKING is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INFO_REDUCED=y diff --git a/arch/arm/configs/mmp2_defconfig b/arch/arm/configs/mmp2_defconfig index 5a584520db2fcfbed8193d7fd65309a90eb9facf..f1cb95e58af030ca1225e1e6272dbb9361b90557 100644 --- a/arch/arm/configs/mmp2_defconfig +++ b/arch/arm/configs/mmp2_defconfig @@ -16,7 +16,7 @@ CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255" +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on console=ttyS2,38400 mem=128M user_debug=255 earlyprintk" CONFIG_VFP=y CONFIG_NET=y CONFIG_PACKET=y @@ -90,6 +90,9 @@ CONFIG_DEBUG_INFO=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_DYNAMIC_DEBUG is not set CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_DEBUG_MMP_UART3=y +CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_ERRORS=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..159f75fc4377a81b9cc515667d8a88bfb8bb4627 --- /dev/null +++ b/arch/arm/configs/multi_v7_defconfig @@ -0,0 +1,57 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_ARCH_MVEBU=y +CONFIG_MACH_ARMADA_370=y +CONFIG_MACH_ARMADA_XP=y +CONFIG_ARCH_HIGHBANK=y +CONFIG_ARCH_SOCFPGA=y +# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set +CONFIG_ARM_ERRATA_754322=y +CONFIG_SMP=y +CONFIG_ARM_ARCH_TIMER=y +CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_HIGHPTE=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_NET=y +CONFIG_ATA=y +CONFIG_SATA_HIGHBANK=y +CONFIG_NETDEVICES=y +CONFIG_NET_CALXEDA_XGMAC=y +CONFIG_SMSC911X=y +CONFIG_STMMAC_ETH=y +CONFIG_SERIO_AMBAKMI=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_DW=y +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_IPMI_HANDLER=y +CONFIG_IPMI_SI=y +CONFIG_I2C=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_GPIOLIB=y +CONFIG_FB=y +CONFIG_FB_ARMCLCD=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_USB=y +CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_STORAGE=y +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_EDAC=y +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_HIGHBANK_MC=y +CONFIG_EDAC_HIGHBANK_L2=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_PL031=y +CONFIG_DMADEVICES=y +CONFIG_PL330_DMA=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 2e86b31c33cf1cab3afe20243c085e26104e574a..7bcf850eddcd7f2c843c0b297eda1f24125cc03c 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -21,6 +21,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 4edcfb4e4deeea476d9b5007779153d2281643b8..048aaca60814c99d2143edee134d128ba9264a08 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -23,12 +23,6 @@ CONFIG_BLK_DEV_INTEGRITY=y # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_MXS=y CONFIG_MACH_MXS_DT=y -CONFIG_MACH_MX23EVK=y -CONFIG_MACH_MX28EVK=y -CONFIG_MACH_STMP378X_DEVB=y -CONFIG_MACH_TX28=y -CONFIG_MACH_M28EVK=y -CONFIG_MACH_APX4DEVKIT=y # CONFIG_ARM_THUMB is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -59,6 +53,9 @@ CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set # CONFIG_BLK_DEV is not set CONFIG_MTD=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_M25P80 CONFIG_MTD_NAND=y CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_NETDEVICES=y @@ -88,13 +85,13 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MXS=y CONFIG_SPI=y CONFIG_SPI_GPIO=m +CONFIG_SPI_MXS=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set # CONFIG_MFD_SUPPORT is not set CONFIG_DISPLAY_SUPPORT=m # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y @@ -109,14 +106,45 @@ CONFIG_SND_SOC_I2C_AND_SPI=y CONFIG_SND_SOC_SGTL5000=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_FB=y +CONFIG_FB_MXS=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_PWM=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_LOGO=y +CONFIG_USB=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_STORAGE=y +CONFIG_USB_MXS_PHY=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y CONFIG_MMC=y CONFIG_MMC_MXS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=m CONFIG_RTC_DRV_STMP=y CONFIG_DMADEVICES=y CONFIG_MXS_DMA=y +CONFIG_STAGING=y +CONFIG_MXS_LRADC=y +CONFIG_IIO_SYSFS_TRIGGER=y CONFIG_COMMON_CLK_DEBUG=y +CONFIG_IIO=y +CONFIG_PWM=y +CONFIG_PWM_MXS=y CONFIG_EXT3_FS=y # CONFIG_DNOTIFY is not set CONFIG_FSCACHE=m diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index e58edc36b4066bdba9dcdd4112d5ae29c15c8f5e..62303043db9cf5913938e74c6ec5c6c66bd0d62d 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -123,6 +123,7 @@ CONFIG_HW_RANDOM=y CONFIG_I2C_CHARDEV=y CONFIG_SPI=y CONFIG_SPI_OMAP24XX=y +CONFIG_PINCTRL_SINGLE=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_TWL4030=y diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig deleted file mode 100644 index 35a31ccacc32ac04c847ae13e9ee6a573e03fc31..0000000000000000000000000000000000000000 --- a/arch/arm/configs/pnx4008_defconfig +++ /dev/null @@ -1,472 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSVIPC=y -CONFIG_POSIX_MQUEUE=y -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_AUDIT=y -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_BLK_DEV_INITRD=y -CONFIG_EXPERT=y -CONFIG_SLAB=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_ARCH_PNX4008=y -CONFIG_PREEMPT=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="mem=64M console=ttyS0,115200" -CONFIG_FPE_NWFPE=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m -CONFIG_PM=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -CONFIG_IP_MROUTE=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_IPV6_PRIVACY=y -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_TUNNEL=m -CONFIG_NETFILTER=y -CONFIG_IP_VS=m -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m -CONFIG_IP_VS_FTP=m -CONFIG_IP_NF_QUEUE=m -CONFIG_IP6_NF_QUEUE=m -CONFIG_DECNET_NF_GRABULATOR=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_IP_SCTP=m -CONFIG_ATM=y -CONFIG_ATM_CLIP=y -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -CONFIG_BRIDGE=m -CONFIG_VLAN_8021Q=m -CONFIG_DECNET=m -CONFIG_LLC2=m -CONFIG_IPX=m -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -CONFIG_IPDDP_DECAP=y -CONFIG_X25=m -CONFIG_LAPB=m -CONFIG_ECONET=m -CONFIG_ECONET_AUNUDP=y -CONFIG_ECONET_NATIVE=y -CONFIG_WAN_ROUTER=m -CONFIG_NET_SCHED=y -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_PKTGEN=m -CONFIG_MTD=y -CONFIG_MTD_CONCAT=y -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTD_DOC2000=m -CONFIG_MTD_DOC2001=m -CONFIG_MTD_DOC2001PLUS=m -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_CRYPTOLOOP=y -CONFIG_BLK_DEV_NBD=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_CDROM_PKTCDVD=m -CONFIG_EEPROM_LEGACY=m -CONFIG_SCSI=m -CONFIG_BLK_DEV_SD=m -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_MULTI_LUN=y -CONFIG_SCSI_CONSTANTS=y -CONFIG_SCSI_LOGGING=y -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_DEBUG=m -CONFIG_NETDEVICES=y -CONFIG_DUMMY=m -CONFIG_BONDING=m -CONFIG_EQUALIZER=m -CONFIG_TUN=m -CONFIG_NET_ETHERNET=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_USBNET=m -# CONFIG_USB_NET_CDC_SUBSET is not set -CONFIG_WAN=y -CONFIG_HDLC=m -CONFIG_HDLC_RAW=m -CONFIG_HDLC_RAW_ETH=m -CONFIG_HDLC_CISCO=m -CONFIG_HDLC_FR=m -CONFIG_HDLC_PPP=m -CONFIG_HDLC_X25=m -CONFIG_DLCI=m -CONFIG_WAN_ROUTER_DRIVERS=m -CONFIG_LAPBETHER=m -CONFIG_X25_ASY=m -CONFIG_ATM_TCP=m -CONFIG_PPP=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPP_FILTER=y -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_MPPE=m -CONFIG_PPPOE=m -CONFIG_PPPOATM=m -CONFIG_SLIP=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -CONFIG_SLIP_MODE_SLIP6=y -CONFIG_NETCONSOLE=m -# CONFIG_INPUT_MOUSEDEV is not set -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m -CONFIG_INPUT_EVBUG=m -CONFIG_KEYBOARD_LKKBD=m -CONFIG_KEYBOARD_NEWTON=m -CONFIG_KEYBOARD_SUNKBD=m -CONFIG_KEYBOARD_XTKBD=m -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_VSXXXAA=m -CONFIG_INPUT_JOYSTICK=y -CONFIG_JOYSTICK_ANALOG=m -CONFIG_JOYSTICK_A3D=m -CONFIG_JOYSTICK_ADI=m -CONFIG_JOYSTICK_COBRA=m -CONFIG_JOYSTICK_GF2K=m -CONFIG_JOYSTICK_GRIP=m -CONFIG_JOYSTICK_GRIP_MP=m -CONFIG_JOYSTICK_GUILLEMOT=m -CONFIG_JOYSTICK_INTERACT=m -CONFIG_JOYSTICK_SIDEWINDER=m -CONFIG_JOYSTICK_TMDC=m -CONFIG_JOYSTICK_IFORCE=m -CONFIG_JOYSTICK_IFORCE_USB=y -CONFIG_JOYSTICK_IFORCE_232=y -CONFIG_JOYSTICK_WARRIOR=m -CONFIG_JOYSTICK_MAGELLAN=m -CONFIG_JOYSTICK_SPACEORB=m -CONFIG_JOYSTICK_SPACEBALL=m -CONFIG_JOYSTICK_STINGER=m -CONFIG_JOYSTICK_JOYDUMP=m -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_GUNZE=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_UINPUT=m -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_RAW=m -CONFIG_GAMEPORT_NS558=m -CONFIG_GAMEPORT_L4=m -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_RSA=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -# CONFIG_HWMON is not set -CONFIG_WATCHDOG=y -CONFIG_SOFT_WATCHDOG=m -CONFIG_USBPCWATCHDOG=m -# CONFIG_VGA_CONSOLE is not set -CONFIG_SOUND=m -CONFIG_SND=m -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_DUMMY=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_MTPAV=m -CONFIG_SND_SERIAL_U16550=m -CONFIG_SND_MPU401=m -CONFIG_SND_USB_AUDIO=m -CONFIG_SOUND_PRIME=m -CONFIG_USB_HID=m -CONFIG_USB_HIDDEV=y -CONFIG_USB_KBD=m -CONFIG_USB_MOUSE=m -CONFIG_USB=y -CONFIG_USB_DEVICEFS=y -CONFIG_USB_MON=y -CONFIG_USB_SL811_HCD=m -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=m -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_RIO500=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_LED=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_TEST=m -CONFIG_USB_ATM=m -CONFIG_USB_SPEEDTOUCH=m -CONFIG_USB_GADGET=m -CONFIG_USB_GADGET_DUMMY_HCD=y -CONFIG_USB_ZERO=m -CONFIG_USB_ETH=m -CONFIG_USB_GADGETFS=m -CONFIG_USB_FILE_STORAGE=m -CONFIG_USB_G_SERIAL=m -CONFIG_MMC=m -CONFIG_EXT2_FS=y -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_REISERFS_FS=m -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_STATISTICS=y -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -CONFIG_XFS_RT=y -CONFIG_INOTIFY=y -CONFIG_QUOTA=y -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_AUTOFS_FS=m -CONFIG_AUTOFS4_FS=m -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_NTFS_FS=m -CONFIG_TMPFS=y -CONFIG_ADFS_FS=m -CONFIG_AFFS_FS=m -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -CONFIG_BEFS_FS=m -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=m -CONFIG_CRAMFS=y -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_ROMFS_FS=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -CONFIG_NFS_V4=y -CONFIG_ROOT_NFS=y -CONFIG_NFSD=m -CONFIG_NFSD_V4=y -CONFIG_RPCSEC_GSS_SPKM3=m -CONFIG_SMB_FS=m -CONFIG_CIFS=m -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -CONFIG_PARTITION_ADVANCED=y -CONFIG_ACORN_PARTITION=y -CONFIG_ACORN_PARTITION_ICS=y -CONFIG_ACORN_PARTITION_RISCIX=y -CONFIG_OSF_PARTITION=y -CONFIG_AMIGA_PARTITION=y -CONFIG_ATARI_PARTITION=y -CONFIG_MAC_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -CONFIG_LDM_PARTITION=y -CONFIG_SGI_PARTITION=y -CONFIG_ULTRIX_PARTITION=y -CONFIG_SUN_PARTITION=y -CONFIG_NLS_DEFAULT="cp437" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_MUTEXES=y -# CONFIG_DEBUG_BUGVERBOSE is not set -CONFIG_SECURITY=y -CONFIG_CRYPTO_NULL=m -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_MD4=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_SHA256=m -CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m -CONFIG_CRYPTO_ANUBIS=m -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_SERPENT=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRC16=m diff --git a/arch/arm/configs/prima2_defconfig b/arch/arm/configs/prima2_defconfig index c328ac65479a6486ecd01562cead013634510ac8..807d4e2acb17c7261927565fe9f799939ef850d7 100644 --- a/arch/arm/configs/prima2_defconfig +++ b/arch/arm/configs/prima2_defconfig @@ -1,4 +1,6 @@ CONFIG_EXPERIMENTAL=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_RELAY=y CONFIG_BLK_DEV_INITRD=y CONFIG_KALLSYMS_ALL=y @@ -8,9 +10,7 @@ CONFIG_MODULE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y CONFIG_BSD_DISKLABEL=y CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_ARCH_PRIMA2=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y +CONFIG_ARCH_SIRF=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_KEXEC=y @@ -36,7 +36,6 @@ CONFIG_SPI=y CONFIG_SPI_SIRF=y CONFIG_SPI_SPIDEV=y # CONFIG_HWMON is not set -# CONFIG_HID_SUPPORT is not set CONFIG_USB_GADGET=y CONFIG_USB_FILE_STORAGE=m CONFIG_USB_MASS_STORAGE=m diff --git a/arch/arm/configs/pxa910_defconfig b/arch/arm/configs/pxa910_defconfig index 1cd381e1d47d9e9c0b53cda80dfe26ebea19e93d..191118caa5c0c37c2dad31dccda5e4994fe527a6 100644 --- a/arch/arm/configs/pxa910_defconfig +++ b/arch/arm/configs/pxa910_defconfig @@ -17,7 +17,7 @@ CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M" +CONFIG_CMDLINE="root=/dev/nfs rootfstype=nfs nfsroot=192.168.2.100:/nfsroot/ ip=192.168.2.101:192.168.2.100::255.255.255.0::eth0:on console=ttyS0,115200 mem=128M earlyprintk" CONFIG_FPE_NWFPE=y CONFIG_NET=y CONFIG_PACKET=y @@ -66,5 +66,7 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y +CONFIG_DEBUG_MMP_UART2=y +CONFIG_EARLY_PRINTK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig index 9160f3b7751faab0478784d0669b85afe9bcdd98..42d5db1876ab5ec3f782b179c563718da1c92036 100644 --- a/arch/arm/configs/qil-a9260_defconfig +++ b/arch/arm/configs/qil-a9260_defconfig @@ -50,7 +50,6 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y CONFIG_BLK_DEV_LOOP=y # CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y @@ -87,7 +86,7 @@ CONFIG_USB_STORAGE=y CONFIG_USB_GADGET=y CONFIG_USB_ETH=m CONFIG_MMC=y -CONFIG_MMC_AT91=m +CONFIG_MMC_ATMELMCI=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index ba6a515086b56b7b05deecc1ea91cb6d61fd6275..3a186d653dac2e7e5feaebe745ab15e1c65c0fea 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -9,11 +9,14 @@ CONFIG_ARCH_S3C64XX=y CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_MACH_SMDK6400=y CONFIG_MACH_ANW6410=y +CONFIG_MACH_MINI6410=y +CONFIG_MACH_REAL6410=y CONFIG_MACH_SMDK6410=y CONFIG_MACH_NCP=y CONFIG_MACH_HMT=y CONFIG_MACH_SMARTQ5=y CONFIG_MACH_SMARTQ7=y +CONFIG_MACH_WLF_CRAGG_6410=y CONFIG_CPU_32v6K=y CONFIG_AEABI=y CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144" diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig index ecf2531523a11bbcf34c8fd1b48ca3d7be5041dc..b4384af1bea66688b8464c171e3c2bc924a73a2c 100644 --- a/arch/arm/configs/sam9_l9260_defconfig +++ b/arch/arm/configs/sam9_l9260_defconfig @@ -39,7 +39,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_RESERVE=3 +CONFIG_MTD_UBI_BEB_LIMIT=25 CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/arm/configs/stamp9g20_defconfig b/arch/arm/configs/stamp9g20_defconfig index d5e260b8b16066314e645d1fb313b6e3f3cbac0d..52f1488591c7bb5724e848b8caa706973fa314d4 100644 --- a/arch/arm/configs/stamp9g20_defconfig +++ b/arch/arm/configs/stamp9g20_defconfig @@ -100,7 +100,6 @@ CONFIG_USB_ETH=m CONFIG_USB_FILE_STORAGE=m CONFIG_USB_G_SERIAL=m CONFIG_MMC=y -# CONFIG_MMC_AT91 is not set CONFIG_MMC_ATMELMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index db2245353f0f936aee5b86614e496aaafa044694..e2184f6c20b3d3e6eeb9338794fb37375a7d9709 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -24,11 +24,11 @@ CONFIG_EFI_PARTITION=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_TEGRA=y +CONFIG_GPIO_PCA953X=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y -CONFIG_MACH_HARMONY=y -CONFIG_MACH_PAZ00=y -CONFIG_MACH_TRIMSLICE=y +CONFIG_TEGRA_PCI=y +CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA=y CONFIG_TEGRA_EMC_SCALING_ENABLE=y CONFIG_SMP=y CONFIG_PREEMPT=y @@ -67,7 +67,18 @@ CONFIG_INET6_IPCOMP=y CONFIG_IPV6_MIP6=y CONFIG_IPV6_TUNNEL=y CONFIG_IPV6_MULTIPLE_TABLES=y -# CONFIG_WIRELESS is not set +CONFIG_BT=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_BNEP=y +CONFIG_BT_HIDP=y +CONFIG_BT_HCIBTUSB=m +CONFIG_CFG80211=y +CONFIG_MAC80211=y +CONFIG_RFKILL=y +CONFIG_RFKILL_INPUT=y +CONFIG_RFKILL_GPIO=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y @@ -87,7 +98,8 @@ CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y -# CONFIG_WLAN is not set +CONFIG_RT2X00=y +CONFIG_RT2800USB=m CONFIG_INPUT_EVDEV=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y @@ -105,25 +117,31 @@ CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_TEGRA=y CONFIG_SPI=y CONFIG_SPI_TEGRA=y -CONFIG_GPIO_TPS65910=y +CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_TPS6586X=y +CONFIG_GPIO_TPS65910=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_SBS=y CONFIG_SENSORS_LM90=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y +CONFIG_MFD_MAX8907=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_TPS62360=y CONFIG_REGULATOR_TPS6586X=y CONFIG_REGULATOR_TPS65910=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m CONFIG_SOUND=y CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_DRIVERS is not set -# CONFIG_SND_PCI is not set # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set # CONFIG_SND_USB is not set @@ -136,15 +154,29 @@ CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_TEGRA=y +CONFIG_USB_ACM=y +CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_DRV_MAX8907=y +CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_TEGRA=y +CONFIG_DMADEVICES=y +CONFIG_TEGRA20_APB_DMA=y CONFIG_STAGING=y CONFIG_SENSORS_ISL29018=y CONFIG_SENSORS_ISL29028=y @@ -152,10 +184,14 @@ CONFIG_SENSORS_AK8975=y CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y +CONFIG_NVEC_POWER=y +CONFIG_NVEC_PAZ00=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_MEMORY=y CONFIG_IIO=y +CONFIG_PWM=y +CONFIG_PWM_TEGRA=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -168,6 +204,7 @@ CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y @@ -186,8 +223,6 @@ CONFIG_DEBUG_VM=y CONFIG_DEBUG_SG=y CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_TWOFISH=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_TEGRA_AES=y diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig index 2d4f661d1cf6e757739429a4ba7730ea7be14eeb..da6845493caabae29842d959f0b80bdcc1bd7790 100644 --- a/arch/arm/configs/u8500_defconfig +++ b/arch/arm/configs/u8500_defconfig @@ -86,6 +86,7 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_LM3530=y CONFIG_LEDS_LP5521=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_AB8500=y CONFIG_RTC_DRV_PL031=y diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig index 2e39f38b9627197fc3b6cf6338ad665b7acc5ae6..a1501e1e1a90bcb1717475538ca8840b9d2aff26 100644 --- a/arch/arm/configs/usb-a9260_defconfig +++ b/arch/arm/configs/usb-a9260_defconfig @@ -49,7 +49,6 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y -CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y CONFIG_BLK_DEV_LOOP=y # CONFIG_MISC_DEVICES is not set CONFIG_SCSI=y diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..a2c83851bc90a29f5f1d06415cb4a0db4dd726e1 --- /dev/null +++ b/arch/arm/crypto/Makefile @@ -0,0 +1,9 @@ +# +# Arch-specific CryptoAPI modules. +# + +obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o +obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o + +aes-arm-y := aes-armv4.o aes_glue.o +sha1-arm-y := sha1-armv4-large.o sha1_glue.o diff --git a/arch/arm/crypto/aes-armv4.S b/arch/arm/crypto/aes-armv4.S new file mode 100644 index 0000000000000000000000000000000000000000..e59b1d505d6c84ca738351a478901582e1f2ad0b --- /dev/null +++ b/arch/arm/crypto/aes-armv4.S @@ -0,0 +1,1112 @@ +#define __ARM_ARCH__ __LINUX_ARM_ARCH__ +@ ==================================================================== +@ Written by Andy Polyakov for the OpenSSL +@ project. The module is, however, dual licensed under OpenSSL and +@ CRYPTOGAMS licenses depending on where you obtain it. For further +@ details see http://www.openssl.org/~appro/cryptogams/. +@ ==================================================================== + +@ AES for ARMv4 + +@ January 2007. +@ +@ Code uses single 1K S-box and is >2 times faster than code generated +@ by gcc-3.4.1. This is thanks to unique feature of ARMv4 ISA, which +@ allows to merge logical or arithmetic operation with shift or rotate +@ in one instruction and emit combined result every cycle. The module +@ is endian-neutral. The performance is ~42 cycles/byte for 128-bit +@ key [on single-issue Xscale PXA250 core]. + +@ May 2007. +@ +@ AES_set_[en|de]crypt_key is added. + +@ July 2010. +@ +@ Rescheduling for dual-issue pipeline resulted in 12% improvement on +@ Cortex A8 core and ~25 cycles per byte processed with 128-bit key. + +@ February 2011. +@ +@ Profiler-assisted and platform-specific optimization resulted in 16% +@ improvement on Cortex A8 core and ~21.5 cycles per byte. + +@ A little glue here to select the correct code below for the ARM CPU +@ that is being targetted. + +.text +.code 32 + +.type AES_Te,%object +.align 5 +AES_Te: +.word 0xc66363a5, 0xf87c7c84, 0xee777799, 0xf67b7b8d +.word 0xfff2f20d, 0xd66b6bbd, 0xde6f6fb1, 0x91c5c554 +.word 0x60303050, 0x02010103, 0xce6767a9, 0x562b2b7d +.word 0xe7fefe19, 0xb5d7d762, 0x4dababe6, 0xec76769a +.word 0x8fcaca45, 0x1f82829d, 0x89c9c940, 0xfa7d7d87 +.word 0xeffafa15, 0xb25959eb, 0x8e4747c9, 0xfbf0f00b +.word 0x41adadec, 0xb3d4d467, 0x5fa2a2fd, 0x45afafea +.word 0x239c9cbf, 0x53a4a4f7, 0xe4727296, 0x9bc0c05b +.word 0x75b7b7c2, 0xe1fdfd1c, 0x3d9393ae, 0x4c26266a +.word 0x6c36365a, 0x7e3f3f41, 0xf5f7f702, 0x83cccc4f +.word 0x6834345c, 0x51a5a5f4, 0xd1e5e534, 0xf9f1f108 +.word 0xe2717193, 0xabd8d873, 0x62313153, 0x2a15153f +.word 0x0804040c, 0x95c7c752, 0x46232365, 0x9dc3c35e +.word 0x30181828, 0x379696a1, 0x0a05050f, 0x2f9a9ab5 +.word 0x0e070709, 0x24121236, 0x1b80809b, 0xdfe2e23d +.word 0xcdebeb26, 0x4e272769, 0x7fb2b2cd, 0xea75759f +.word 0x1209091b, 0x1d83839e, 0x582c2c74, 0x341a1a2e +.word 0x361b1b2d, 0xdc6e6eb2, 0xb45a5aee, 0x5ba0a0fb +.word 0xa45252f6, 0x763b3b4d, 0xb7d6d661, 0x7db3b3ce +.word 0x5229297b, 0xdde3e33e, 0x5e2f2f71, 0x13848497 +.word 0xa65353f5, 0xb9d1d168, 0x00000000, 0xc1eded2c +.word 0x40202060, 0xe3fcfc1f, 0x79b1b1c8, 0xb65b5bed +.word 0xd46a6abe, 0x8dcbcb46, 0x67bebed9, 0x7239394b +.word 0x944a4ade, 0x984c4cd4, 0xb05858e8, 0x85cfcf4a +.word 0xbbd0d06b, 0xc5efef2a, 0x4faaaae5, 0xedfbfb16 +.word 0x864343c5, 0x9a4d4dd7, 0x66333355, 0x11858594 +.word 0x8a4545cf, 0xe9f9f910, 0x04020206, 0xfe7f7f81 +.word 0xa05050f0, 0x783c3c44, 0x259f9fba, 0x4ba8a8e3 +.word 0xa25151f3, 0x5da3a3fe, 0x804040c0, 0x058f8f8a +.word 0x3f9292ad, 0x219d9dbc, 0x70383848, 0xf1f5f504 +.word 0x63bcbcdf, 0x77b6b6c1, 0xafdada75, 0x42212163 +.word 0x20101030, 0xe5ffff1a, 0xfdf3f30e, 0xbfd2d26d +.word 0x81cdcd4c, 0x180c0c14, 0x26131335, 0xc3ecec2f +.word 0xbe5f5fe1, 0x359797a2, 0x884444cc, 0x2e171739 +.word 0x93c4c457, 0x55a7a7f2, 0xfc7e7e82, 0x7a3d3d47 +.word 0xc86464ac, 0xba5d5de7, 0x3219192b, 0xe6737395 +.word 0xc06060a0, 0x19818198, 0x9e4f4fd1, 0xa3dcdc7f +.word 0x44222266, 0x542a2a7e, 0x3b9090ab, 0x0b888883 +.word 0x8c4646ca, 0xc7eeee29, 0x6bb8b8d3, 0x2814143c +.word 0xa7dede79, 0xbc5e5ee2, 0x160b0b1d, 0xaddbdb76 +.word 0xdbe0e03b, 0x64323256, 0x743a3a4e, 0x140a0a1e +.word 0x924949db, 0x0c06060a, 0x4824246c, 0xb85c5ce4 +.word 0x9fc2c25d, 0xbdd3d36e, 0x43acacef, 0xc46262a6 +.word 0x399191a8, 0x319595a4, 0xd3e4e437, 0xf279798b +.word 0xd5e7e732, 0x8bc8c843, 0x6e373759, 0xda6d6db7 +.word 0x018d8d8c, 0xb1d5d564, 0x9c4e4ed2, 0x49a9a9e0 +.word 0xd86c6cb4, 0xac5656fa, 0xf3f4f407, 0xcfeaea25 +.word 0xca6565af, 0xf47a7a8e, 0x47aeaee9, 0x10080818 +.word 0x6fbabad5, 0xf0787888, 0x4a25256f, 0x5c2e2e72 +.word 0x381c1c24, 0x57a6a6f1, 0x73b4b4c7, 0x97c6c651 +.word 0xcbe8e823, 0xa1dddd7c, 0xe874749c, 0x3e1f1f21 +.word 0x964b4bdd, 0x61bdbddc, 0x0d8b8b86, 0x0f8a8a85 +.word 0xe0707090, 0x7c3e3e42, 0x71b5b5c4, 0xcc6666aa +.word 0x904848d8, 0x06030305, 0xf7f6f601, 0x1c0e0e12 +.word 0xc26161a3, 0x6a35355f, 0xae5757f9, 0x69b9b9d0 +.word 0x17868691, 0x99c1c158, 0x3a1d1d27, 0x279e9eb9 +.word 0xd9e1e138, 0xebf8f813, 0x2b9898b3, 0x22111133 +.word 0xd26969bb, 0xa9d9d970, 0x078e8e89, 0x339494a7 +.word 0x2d9b9bb6, 0x3c1e1e22, 0x15878792, 0xc9e9e920 +.word 0x87cece49, 0xaa5555ff, 0x50282878, 0xa5dfdf7a +.word 0x038c8c8f, 0x59a1a1f8, 0x09898980, 0x1a0d0d17 +.word 0x65bfbfda, 0xd7e6e631, 0x844242c6, 0xd06868b8 +.word 0x824141c3, 0x299999b0, 0x5a2d2d77, 0x1e0f0f11 +.word 0x7bb0b0cb, 0xa85454fc, 0x6dbbbbd6, 0x2c16163a +@ Te4[256] +.byte 0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5 +.byte 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76 +.byte 0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0 +.byte 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0 +.byte 0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc +.byte 0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15 +.byte 0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a +.byte 0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75 +.byte 0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0 +.byte 0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84 +.byte 0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b +.byte 0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf +.byte 0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85 +.byte 0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8 +.byte 0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5 +.byte 0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2 +.byte 0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17 +.byte 0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73 +.byte 0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88 +.byte 0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb +.byte 0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c +.byte 0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79 +.byte 0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9 +.byte 0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08 +.byte 0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6 +.byte 0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a +.byte 0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e +.byte 0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e +.byte 0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94 +.byte 0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf +.byte 0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68 +.byte 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16 +@ rcon[] +.word 0x01000000, 0x02000000, 0x04000000, 0x08000000 +.word 0x10000000, 0x20000000, 0x40000000, 0x80000000 +.word 0x1B000000, 0x36000000, 0, 0, 0, 0, 0, 0 +.size AES_Te,.-AES_Te + +@ void AES_encrypt(const unsigned char *in, unsigned char *out, +@ const AES_KEY *key) { +.global AES_encrypt +.type AES_encrypt,%function +.align 5 +AES_encrypt: + sub r3,pc,#8 @ AES_encrypt + stmdb sp!,{r1,r4-r12,lr} + mov r12,r0 @ inp + mov r11,r2 + sub r10,r3,#AES_encrypt-AES_Te @ Te +#if __ARM_ARCH__<7 + ldrb r0,[r12,#3] @ load input data in endian-neutral + ldrb r4,[r12,#2] @ manner... + ldrb r5,[r12,#1] + ldrb r6,[r12,#0] + orr r0,r0,r4,lsl#8 + ldrb r1,[r12,#7] + orr r0,r0,r5,lsl#16 + ldrb r4,[r12,#6] + orr r0,r0,r6,lsl#24 + ldrb r5,[r12,#5] + ldrb r6,[r12,#4] + orr r1,r1,r4,lsl#8 + ldrb r2,[r12,#11] + orr r1,r1,r5,lsl#16 + ldrb r4,[r12,#10] + orr r1,r1,r6,lsl#24 + ldrb r5,[r12,#9] + ldrb r6,[r12,#8] + orr r2,r2,r4,lsl#8 + ldrb r3,[r12,#15] + orr r2,r2,r5,lsl#16 + ldrb r4,[r12,#14] + orr r2,r2,r6,lsl#24 + ldrb r5,[r12,#13] + ldrb r6,[r12,#12] + orr r3,r3,r4,lsl#8 + orr r3,r3,r5,lsl#16 + orr r3,r3,r6,lsl#24 +#else + ldr r0,[r12,#0] + ldr r1,[r12,#4] + ldr r2,[r12,#8] + ldr r3,[r12,#12] +#ifdef __ARMEL__ + rev r0,r0 + rev r1,r1 + rev r2,r2 + rev r3,r3 +#endif +#endif + bl _armv4_AES_encrypt + + ldr r12,[sp],#4 @ pop out +#if __ARM_ARCH__>=7 +#ifdef __ARMEL__ + rev r0,r0 + rev r1,r1 + rev r2,r2 + rev r3,r3 +#endif + str r0,[r12,#0] + str r1,[r12,#4] + str r2,[r12,#8] + str r3,[r12,#12] +#else + mov r4,r0,lsr#24 @ write output in endian-neutral + mov r5,r0,lsr#16 @ manner... + mov r6,r0,lsr#8 + strb r4,[r12,#0] + strb r5,[r12,#1] + mov r4,r1,lsr#24 + strb r6,[r12,#2] + mov r5,r1,lsr#16 + strb r0,[r12,#3] + mov r6,r1,lsr#8 + strb r4,[r12,#4] + strb r5,[r12,#5] + mov r4,r2,lsr#24 + strb r6,[r12,#6] + mov r5,r2,lsr#16 + strb r1,[r12,#7] + mov r6,r2,lsr#8 + strb r4,[r12,#8] + strb r5,[r12,#9] + mov r4,r3,lsr#24 + strb r6,[r12,#10] + mov r5,r3,lsr#16 + strb r2,[r12,#11] + mov r6,r3,lsr#8 + strb r4,[r12,#12] + strb r5,[r12,#13] + strb r6,[r12,#14] + strb r3,[r12,#15] +#endif +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r12,pc} +#else + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.size AES_encrypt,.-AES_encrypt + +.type _armv4_AES_encrypt,%function +.align 2 +_armv4_AES_encrypt: + str lr,[sp,#-4]! @ push lr + ldmia r11!,{r4-r7} + eor r0,r0,r4 + ldr r12,[r11,#240-16] + eor r1,r1,r5 + eor r2,r2,r6 + eor r3,r3,r7 + sub r12,r12,#1 + mov lr,#255 + + and r7,lr,r0 + and r8,lr,r0,lsr#8 + and r9,lr,r0,lsr#16 + mov r0,r0,lsr#24 +.Lenc_loop: + ldr r4,[r10,r7,lsl#2] @ Te3[s0>>0] + and r7,lr,r1,lsr#16 @ i0 + ldr r5,[r10,r8,lsl#2] @ Te2[s0>>8] + and r8,lr,r1 + ldr r6,[r10,r9,lsl#2] @ Te1[s0>>16] + and r9,lr,r1,lsr#8 + ldr r0,[r10,r0,lsl#2] @ Te0[s0>>24] + mov r1,r1,lsr#24 + + ldr r7,[r10,r7,lsl#2] @ Te1[s1>>16] + ldr r8,[r10,r8,lsl#2] @ Te3[s1>>0] + ldr r9,[r10,r9,lsl#2] @ Te2[s1>>8] + eor r0,r0,r7,ror#8 + ldr r1,[r10,r1,lsl#2] @ Te0[s1>>24] + and r7,lr,r2,lsr#8 @ i0 + eor r5,r5,r8,ror#8 + and r8,lr,r2,lsr#16 @ i1 + eor r6,r6,r9,ror#8 + and r9,lr,r2 + ldr r7,[r10,r7,lsl#2] @ Te2[s2>>8] + eor r1,r1,r4,ror#24 + ldr r8,[r10,r8,lsl#2] @ Te1[s2>>16] + mov r2,r2,lsr#24 + + ldr r9,[r10,r9,lsl#2] @ Te3[s2>>0] + eor r0,r0,r7,ror#16 + ldr r2,[r10,r2,lsl#2] @ Te0[s2>>24] + and r7,lr,r3 @ i0 + eor r1,r1,r8,ror#8 + and r8,lr,r3,lsr#8 @ i1 + eor r6,r6,r9,ror#16 + and r9,lr,r3,lsr#16 @ i2 + ldr r7,[r10,r7,lsl#2] @ Te3[s3>>0] + eor r2,r2,r5,ror#16 + ldr r8,[r10,r8,lsl#2] @ Te2[s3>>8] + mov r3,r3,lsr#24 + + ldr r9,[r10,r9,lsl#2] @ Te1[s3>>16] + eor r0,r0,r7,ror#24 + ldr r7,[r11],#16 + eor r1,r1,r8,ror#16 + ldr r3,[r10,r3,lsl#2] @ Te0[s3>>24] + eor r2,r2,r9,ror#8 + ldr r4,[r11,#-12] + eor r3,r3,r6,ror#8 + + ldr r5,[r11,#-8] + eor r0,r0,r7 + ldr r6,[r11,#-4] + and r7,lr,r0 + eor r1,r1,r4 + and r8,lr,r0,lsr#8 + eor r2,r2,r5 + and r9,lr,r0,lsr#16 + eor r3,r3,r6 + mov r0,r0,lsr#24 + + subs r12,r12,#1 + bne .Lenc_loop + + add r10,r10,#2 + + ldrb r4,[r10,r7,lsl#2] @ Te4[s0>>0] + and r7,lr,r1,lsr#16 @ i0 + ldrb r5,[r10,r8,lsl#2] @ Te4[s0>>8] + and r8,lr,r1 + ldrb r6,[r10,r9,lsl#2] @ Te4[s0>>16] + and r9,lr,r1,lsr#8 + ldrb r0,[r10,r0,lsl#2] @ Te4[s0>>24] + mov r1,r1,lsr#24 + + ldrb r7,[r10,r7,lsl#2] @ Te4[s1>>16] + ldrb r8,[r10,r8,lsl#2] @ Te4[s1>>0] + ldrb r9,[r10,r9,lsl#2] @ Te4[s1>>8] + eor r0,r7,r0,lsl#8 + ldrb r1,[r10,r1,lsl#2] @ Te4[s1>>24] + and r7,lr,r2,lsr#8 @ i0 + eor r5,r8,r5,lsl#8 + and r8,lr,r2,lsr#16 @ i1 + eor r6,r9,r6,lsl#8 + and r9,lr,r2 + ldrb r7,[r10,r7,lsl#2] @ Te4[s2>>8] + eor r1,r4,r1,lsl#24 + ldrb r8,[r10,r8,lsl#2] @ Te4[s2>>16] + mov r2,r2,lsr#24 + + ldrb r9,[r10,r9,lsl#2] @ Te4[s2>>0] + eor r0,r7,r0,lsl#8 + ldrb r2,[r10,r2,lsl#2] @ Te4[s2>>24] + and r7,lr,r3 @ i0 + eor r1,r1,r8,lsl#16 + and r8,lr,r3,lsr#8 @ i1 + eor r6,r9,r6,lsl#8 + and r9,lr,r3,lsr#16 @ i2 + ldrb r7,[r10,r7,lsl#2] @ Te4[s3>>0] + eor r2,r5,r2,lsl#24 + ldrb r8,[r10,r8,lsl#2] @ Te4[s3>>8] + mov r3,r3,lsr#24 + + ldrb r9,[r10,r9,lsl#2] @ Te4[s3>>16] + eor r0,r7,r0,lsl#8 + ldr r7,[r11,#0] + ldrb r3,[r10,r3,lsl#2] @ Te4[s3>>24] + eor r1,r1,r8,lsl#8 + ldr r4,[r11,#4] + eor r2,r2,r9,lsl#16 + ldr r5,[r11,#8] + eor r3,r6,r3,lsl#24 + ldr r6,[r11,#12] + + eor r0,r0,r7 + eor r1,r1,r4 + eor r2,r2,r5 + eor r3,r3,r6 + + sub r10,r10,#2 + ldr pc,[sp],#4 @ pop and return +.size _armv4_AES_encrypt,.-_armv4_AES_encrypt + +.global private_AES_set_encrypt_key +.type private_AES_set_encrypt_key,%function +.align 5 +private_AES_set_encrypt_key: +_armv4_AES_set_encrypt_key: + sub r3,pc,#8 @ AES_set_encrypt_key + teq r0,#0 + moveq r0,#-1 + beq .Labrt + teq r2,#0 + moveq r0,#-1 + beq .Labrt + + teq r1,#128 + beq .Lok + teq r1,#192 + beq .Lok + teq r1,#256 + movne r0,#-1 + bne .Labrt + +.Lok: stmdb sp!,{r4-r12,lr} + sub r10,r3,#_armv4_AES_set_encrypt_key-AES_Te-1024 @ Te4 + + mov r12,r0 @ inp + mov lr,r1 @ bits + mov r11,r2 @ key + +#if __ARM_ARCH__<7 + ldrb r0,[r12,#3] @ load input data in endian-neutral + ldrb r4,[r12,#2] @ manner... + ldrb r5,[r12,#1] + ldrb r6,[r12,#0] + orr r0,r0,r4,lsl#8 + ldrb r1,[r12,#7] + orr r0,r0,r5,lsl#16 + ldrb r4,[r12,#6] + orr r0,r0,r6,lsl#24 + ldrb r5,[r12,#5] + ldrb r6,[r12,#4] + orr r1,r1,r4,lsl#8 + ldrb r2,[r12,#11] + orr r1,r1,r5,lsl#16 + ldrb r4,[r12,#10] + orr r1,r1,r6,lsl#24 + ldrb r5,[r12,#9] + ldrb r6,[r12,#8] + orr r2,r2,r4,lsl#8 + ldrb r3,[r12,#15] + orr r2,r2,r5,lsl#16 + ldrb r4,[r12,#14] + orr r2,r2,r6,lsl#24 + ldrb r5,[r12,#13] + ldrb r6,[r12,#12] + orr r3,r3,r4,lsl#8 + str r0,[r11],#16 + orr r3,r3,r5,lsl#16 + str r1,[r11,#-12] + orr r3,r3,r6,lsl#24 + str r2,[r11,#-8] + str r3,[r11,#-4] +#else + ldr r0,[r12,#0] + ldr r1,[r12,#4] + ldr r2,[r12,#8] + ldr r3,[r12,#12] +#ifdef __ARMEL__ + rev r0,r0 + rev r1,r1 + rev r2,r2 + rev r3,r3 +#endif + str r0,[r11],#16 + str r1,[r11,#-12] + str r2,[r11,#-8] + str r3,[r11,#-4] +#endif + + teq lr,#128 + bne .Lnot128 + mov r12,#10 + str r12,[r11,#240-16] + add r6,r10,#256 @ rcon + mov lr,#255 + +.L128_loop: + and r5,lr,r3,lsr#24 + and r7,lr,r3,lsr#16 + ldrb r5,[r10,r5] + and r8,lr,r3,lsr#8 + ldrb r7,[r10,r7] + and r9,lr,r3 + ldrb r8,[r10,r8] + orr r5,r5,r7,lsl#24 + ldrb r9,[r10,r9] + orr r5,r5,r8,lsl#16 + ldr r4,[r6],#4 @ rcon[i++] + orr r5,r5,r9,lsl#8 + eor r5,r5,r4 + eor r0,r0,r5 @ rk[4]=rk[0]^... + eor r1,r1,r0 @ rk[5]=rk[1]^rk[4] + str r0,[r11],#16 + eor r2,r2,r1 @ rk[6]=rk[2]^rk[5] + str r1,[r11,#-12] + eor r3,r3,r2 @ rk[7]=rk[3]^rk[6] + str r2,[r11,#-8] + subs r12,r12,#1 + str r3,[r11,#-4] + bne .L128_loop + sub r2,r11,#176 + b .Ldone + +.Lnot128: +#if __ARM_ARCH__<7 + ldrb r8,[r12,#19] + ldrb r4,[r12,#18] + ldrb r5,[r12,#17] + ldrb r6,[r12,#16] + orr r8,r8,r4,lsl#8 + ldrb r9,[r12,#23] + orr r8,r8,r5,lsl#16 + ldrb r4,[r12,#22] + orr r8,r8,r6,lsl#24 + ldrb r5,[r12,#21] + ldrb r6,[r12,#20] + orr r9,r9,r4,lsl#8 + orr r9,r9,r5,lsl#16 + str r8,[r11],#8 + orr r9,r9,r6,lsl#24 + str r9,[r11,#-4] +#else + ldr r8,[r12,#16] + ldr r9,[r12,#20] +#ifdef __ARMEL__ + rev r8,r8 + rev r9,r9 +#endif + str r8,[r11],#8 + str r9,[r11,#-4] +#endif + + teq lr,#192 + bne .Lnot192 + mov r12,#12 + str r12,[r11,#240-24] + add r6,r10,#256 @ rcon + mov lr,#255 + mov r12,#8 + +.L192_loop: + and r5,lr,r9,lsr#24 + and r7,lr,r9,lsr#16 + ldrb r5,[r10,r5] + and r8,lr,r9,lsr#8 + ldrb r7,[r10,r7] + and r9,lr,r9 + ldrb r8,[r10,r8] + orr r5,r5,r7,lsl#24 + ldrb r9,[r10,r9] + orr r5,r5,r8,lsl#16 + ldr r4,[r6],#4 @ rcon[i++] + orr r5,r5,r9,lsl#8 + eor r9,r5,r4 + eor r0,r0,r9 @ rk[6]=rk[0]^... + eor r1,r1,r0 @ rk[7]=rk[1]^rk[6] + str r0,[r11],#24 + eor r2,r2,r1 @ rk[8]=rk[2]^rk[7] + str r1,[r11,#-20] + eor r3,r3,r2 @ rk[9]=rk[3]^rk[8] + str r2,[r11,#-16] + subs r12,r12,#1 + str r3,[r11,#-12] + subeq r2,r11,#216 + beq .Ldone + + ldr r7,[r11,#-32] + ldr r8,[r11,#-28] + eor r7,r7,r3 @ rk[10]=rk[4]^rk[9] + eor r9,r8,r7 @ rk[11]=rk[5]^rk[10] + str r7,[r11,#-8] + str r9,[r11,#-4] + b .L192_loop + +.Lnot192: +#if __ARM_ARCH__<7 + ldrb r8,[r12,#27] + ldrb r4,[r12,#26] + ldrb r5,[r12,#25] + ldrb r6,[r12,#24] + orr r8,r8,r4,lsl#8 + ldrb r9,[r12,#31] + orr r8,r8,r5,lsl#16 + ldrb r4,[r12,#30] + orr r8,r8,r6,lsl#24 + ldrb r5,[r12,#29] + ldrb r6,[r12,#28] + orr r9,r9,r4,lsl#8 + orr r9,r9,r5,lsl#16 + str r8,[r11],#8 + orr r9,r9,r6,lsl#24 + str r9,[r11,#-4] +#else + ldr r8,[r12,#24] + ldr r9,[r12,#28] +#ifdef __ARMEL__ + rev r8,r8 + rev r9,r9 +#endif + str r8,[r11],#8 + str r9,[r11,#-4] +#endif + + mov r12,#14 + str r12,[r11,#240-32] + add r6,r10,#256 @ rcon + mov lr,#255 + mov r12,#7 + +.L256_loop: + and r5,lr,r9,lsr#24 + and r7,lr,r9,lsr#16 + ldrb r5,[r10,r5] + and r8,lr,r9,lsr#8 + ldrb r7,[r10,r7] + and r9,lr,r9 + ldrb r8,[r10,r8] + orr r5,r5,r7,lsl#24 + ldrb r9,[r10,r9] + orr r5,r5,r8,lsl#16 + ldr r4,[r6],#4 @ rcon[i++] + orr r5,r5,r9,lsl#8 + eor r9,r5,r4 + eor r0,r0,r9 @ rk[8]=rk[0]^... + eor r1,r1,r0 @ rk[9]=rk[1]^rk[8] + str r0,[r11],#32 + eor r2,r2,r1 @ rk[10]=rk[2]^rk[9] + str r1,[r11,#-28] + eor r3,r3,r2 @ rk[11]=rk[3]^rk[10] + str r2,[r11,#-24] + subs r12,r12,#1 + str r3,[r11,#-20] + subeq r2,r11,#256 + beq .Ldone + + and r5,lr,r3 + and r7,lr,r3,lsr#8 + ldrb r5,[r10,r5] + and r8,lr,r3,lsr#16 + ldrb r7,[r10,r7] + and r9,lr,r3,lsr#24 + ldrb r8,[r10,r8] + orr r5,r5,r7,lsl#8 + ldrb r9,[r10,r9] + orr r5,r5,r8,lsl#16 + ldr r4,[r11,#-48] + orr r5,r5,r9,lsl#24 + + ldr r7,[r11,#-44] + ldr r8,[r11,#-40] + eor r4,r4,r5 @ rk[12]=rk[4]^... + ldr r9,[r11,#-36] + eor r7,r7,r4 @ rk[13]=rk[5]^rk[12] + str r4,[r11,#-16] + eor r8,r8,r7 @ rk[14]=rk[6]^rk[13] + str r7,[r11,#-12] + eor r9,r9,r8 @ rk[15]=rk[7]^rk[14] + str r8,[r11,#-8] + str r9,[r11,#-4] + b .L256_loop + +.Ldone: mov r0,#0 + ldmia sp!,{r4-r12,lr} +.Labrt: tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +.size private_AES_set_encrypt_key,.-private_AES_set_encrypt_key + +.global private_AES_set_decrypt_key +.type private_AES_set_decrypt_key,%function +.align 5 +private_AES_set_decrypt_key: + str lr,[sp,#-4]! @ push lr +#if 0 + @ kernel does both of these in setkey so optimise this bit out by + @ expecting the key to already have the enc_key work done (see aes_glue.c) + bl _armv4_AES_set_encrypt_key +#else + mov r0,#0 +#endif + teq r0,#0 + ldrne lr,[sp],#4 @ pop lr + bne .Labrt + + stmdb sp!,{r4-r12} + + ldr r12,[r2,#240] @ AES_set_encrypt_key preserves r2, + mov r11,r2 @ which is AES_KEY *key + mov r7,r2 + add r8,r2,r12,lsl#4 + +.Linv: ldr r0,[r7] + ldr r1,[r7,#4] + ldr r2,[r7,#8] + ldr r3,[r7,#12] + ldr r4,[r8] + ldr r5,[r8,#4] + ldr r6,[r8,#8] + ldr r9,[r8,#12] + str r0,[r8],#-16 + str r1,[r8,#16+4] + str r2,[r8,#16+8] + str r3,[r8,#16+12] + str r4,[r7],#16 + str r5,[r7,#-12] + str r6,[r7,#-8] + str r9,[r7,#-4] + teq r7,r8 + bne .Linv + ldr r0,[r11,#16]! @ prefetch tp1 + mov r7,#0x80 + mov r8,#0x1b + orr r7,r7,#0x8000 + orr r8,r8,#0x1b00 + orr r7,r7,r7,lsl#16 + orr r8,r8,r8,lsl#16 + sub r12,r12,#1 + mvn r9,r7 + mov r12,r12,lsl#2 @ (rounds-1)*4 + +.Lmix: and r4,r0,r7 + and r1,r0,r9 + sub r4,r4,r4,lsr#7 + and r4,r4,r8 + eor r1,r4,r1,lsl#1 @ tp2 + + and r4,r1,r7 + and r2,r1,r9 + sub r4,r4,r4,lsr#7 + and r4,r4,r8 + eor r2,r4,r2,lsl#1 @ tp4 + + and r4,r2,r7 + and r3,r2,r9 + sub r4,r4,r4,lsr#7 + and r4,r4,r8 + eor r3,r4,r3,lsl#1 @ tp8 + + eor r4,r1,r2 + eor r5,r0,r3 @ tp9 + eor r4,r4,r3 @ tpe + eor r4,r4,r1,ror#24 + eor r4,r4,r5,ror#24 @ ^= ROTATE(tpb=tp9^tp2,8) + eor r4,r4,r2,ror#16 + eor r4,r4,r5,ror#16 @ ^= ROTATE(tpd=tp9^tp4,16) + eor r4,r4,r5,ror#8 @ ^= ROTATE(tp9,24) + + ldr r0,[r11,#4] @ prefetch tp1 + str r4,[r11],#4 + subs r12,r12,#1 + bne .Lmix + + mov r0,#0 +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r12,pc} +#else + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.size private_AES_set_decrypt_key,.-private_AES_set_decrypt_key + +.type AES_Td,%object +.align 5 +AES_Td: +.word 0x51f4a750, 0x7e416553, 0x1a17a4c3, 0x3a275e96 +.word 0x3bab6bcb, 0x1f9d45f1, 0xacfa58ab, 0x4be30393 +.word 0x2030fa55, 0xad766df6, 0x88cc7691, 0xf5024c25 +.word 0x4fe5d7fc, 0xc52acbd7, 0x26354480, 0xb562a38f +.word 0xdeb15a49, 0x25ba1b67, 0x45ea0e98, 0x5dfec0e1 +.word 0xc32f7502, 0x814cf012, 0x8d4697a3, 0x6bd3f9c6 +.word 0x038f5fe7, 0x15929c95, 0xbf6d7aeb, 0x955259da +.word 0xd4be832d, 0x587421d3, 0x49e06929, 0x8ec9c844 +.word 0x75c2896a, 0xf48e7978, 0x99583e6b, 0x27b971dd +.word 0xbee14fb6, 0xf088ad17, 0xc920ac66, 0x7dce3ab4 +.word 0x63df4a18, 0xe51a3182, 0x97513360, 0x62537f45 +.word 0xb16477e0, 0xbb6bae84, 0xfe81a01c, 0xf9082b94 +.word 0x70486858, 0x8f45fd19, 0x94de6c87, 0x527bf8b7 +.word 0xab73d323, 0x724b02e2, 0xe31f8f57, 0x6655ab2a +.word 0xb2eb2807, 0x2fb5c203, 0x86c57b9a, 0xd33708a5 +.word 0x302887f2, 0x23bfa5b2, 0x02036aba, 0xed16825c +.word 0x8acf1c2b, 0xa779b492, 0xf307f2f0, 0x4e69e2a1 +.word 0x65daf4cd, 0x0605bed5, 0xd134621f, 0xc4a6fe8a +.word 0x342e539d, 0xa2f355a0, 0x058ae132, 0xa4f6eb75 +.word 0x0b83ec39, 0x4060efaa, 0x5e719f06, 0xbd6e1051 +.word 0x3e218af9, 0x96dd063d, 0xdd3e05ae, 0x4de6bd46 +.word 0x91548db5, 0x71c45d05, 0x0406d46f, 0x605015ff +.word 0x1998fb24, 0xd6bde997, 0x894043cc, 0x67d99e77 +.word 0xb0e842bd, 0x07898b88, 0xe7195b38, 0x79c8eedb +.word 0xa17c0a47, 0x7c420fe9, 0xf8841ec9, 0x00000000 +.word 0x09808683, 0x322bed48, 0x1e1170ac, 0x6c5a724e +.word 0xfd0efffb, 0x0f853856, 0x3daed51e, 0x362d3927 +.word 0x0a0fd964, 0x685ca621, 0x9b5b54d1, 0x24362e3a +.word 0x0c0a67b1, 0x9357e70f, 0xb4ee96d2, 0x1b9b919e +.word 0x80c0c54f, 0x61dc20a2, 0x5a774b69, 0x1c121a16 +.word 0xe293ba0a, 0xc0a02ae5, 0x3c22e043, 0x121b171d +.word 0x0e090d0b, 0xf28bc7ad, 0x2db6a8b9, 0x141ea9c8 +.word 0x57f11985, 0xaf75074c, 0xee99ddbb, 0xa37f60fd +.word 0xf701269f, 0x5c72f5bc, 0x44663bc5, 0x5bfb7e34 +.word 0x8b432976, 0xcb23c6dc, 0xb6edfc68, 0xb8e4f163 +.word 0xd731dcca, 0x42638510, 0x13972240, 0x84c61120 +.word 0x854a247d, 0xd2bb3df8, 0xaef93211, 0xc729a16d +.word 0x1d9e2f4b, 0xdcb230f3, 0x0d8652ec, 0x77c1e3d0 +.word 0x2bb3166c, 0xa970b999, 0x119448fa, 0x47e96422 +.word 0xa8fc8cc4, 0xa0f03f1a, 0x567d2cd8, 0x223390ef +.word 0x87494ec7, 0xd938d1c1, 0x8ccaa2fe, 0x98d40b36 +.word 0xa6f581cf, 0xa57ade28, 0xdab78e26, 0x3fadbfa4 +.word 0x2c3a9de4, 0x5078920d, 0x6a5fcc9b, 0x547e4662 +.word 0xf68d13c2, 0x90d8b8e8, 0x2e39f75e, 0x82c3aff5 +.word 0x9f5d80be, 0x69d0937c, 0x6fd52da9, 0xcf2512b3 +.word 0xc8ac993b, 0x10187da7, 0xe89c636e, 0xdb3bbb7b +.word 0xcd267809, 0x6e5918f4, 0xec9ab701, 0x834f9aa8 +.word 0xe6956e65, 0xaaffe67e, 0x21bccf08, 0xef15e8e6 +.word 0xbae79bd9, 0x4a6f36ce, 0xea9f09d4, 0x29b07cd6 +.word 0x31a4b2af, 0x2a3f2331, 0xc6a59430, 0x35a266c0 +.word 0x744ebc37, 0xfc82caa6, 0xe090d0b0, 0x33a7d815 +.word 0xf104984a, 0x41ecdaf7, 0x7fcd500e, 0x1791f62f +.word 0x764dd68d, 0x43efb04d, 0xccaa4d54, 0xe49604df +.word 0x9ed1b5e3, 0x4c6a881b, 0xc12c1fb8, 0x4665517f +.word 0x9d5eea04, 0x018c355d, 0xfa877473, 0xfb0b412e +.word 0xb3671d5a, 0x92dbd252, 0xe9105633, 0x6dd64713 +.word 0x9ad7618c, 0x37a10c7a, 0x59f8148e, 0xeb133c89 +.word 0xcea927ee, 0xb761c935, 0xe11ce5ed, 0x7a47b13c +.word 0x9cd2df59, 0x55f2733f, 0x1814ce79, 0x73c737bf +.word 0x53f7cdea, 0x5ffdaa5b, 0xdf3d6f14, 0x7844db86 +.word 0xcaaff381, 0xb968c43e, 0x3824342c, 0xc2a3405f +.word 0x161dc372, 0xbce2250c, 0x283c498b, 0xff0d9541 +.word 0x39a80171, 0x080cb3de, 0xd8b4e49c, 0x6456c190 +.word 0x7bcb8461, 0xd532b670, 0x486c5c74, 0xd0b85742 +@ Td4[256] +.byte 0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38 +.byte 0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb +.byte 0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87 +.byte 0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb +.byte 0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d +.byte 0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e +.byte 0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2 +.byte 0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25 +.byte 0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16 +.byte 0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92 +.byte 0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda +.byte 0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84 +.byte 0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a +.byte 0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06 +.byte 0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02 +.byte 0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b +.byte 0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea +.byte 0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73 +.byte 0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85 +.byte 0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e +.byte 0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89 +.byte 0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b +.byte 0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20 +.byte 0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4 +.byte 0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31 +.byte 0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f +.byte 0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d +.byte 0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef +.byte 0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0 +.byte 0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61 +.byte 0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26 +.byte 0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d +.size AES_Td,.-AES_Td + +@ void AES_decrypt(const unsigned char *in, unsigned char *out, +@ const AES_KEY *key) { +.global AES_decrypt +.type AES_decrypt,%function +.align 5 +AES_decrypt: + sub r3,pc,#8 @ AES_decrypt + stmdb sp!,{r1,r4-r12,lr} + mov r12,r0 @ inp + mov r11,r2 + sub r10,r3,#AES_decrypt-AES_Td @ Td +#if __ARM_ARCH__<7 + ldrb r0,[r12,#3] @ load input data in endian-neutral + ldrb r4,[r12,#2] @ manner... + ldrb r5,[r12,#1] + ldrb r6,[r12,#0] + orr r0,r0,r4,lsl#8 + ldrb r1,[r12,#7] + orr r0,r0,r5,lsl#16 + ldrb r4,[r12,#6] + orr r0,r0,r6,lsl#24 + ldrb r5,[r12,#5] + ldrb r6,[r12,#4] + orr r1,r1,r4,lsl#8 + ldrb r2,[r12,#11] + orr r1,r1,r5,lsl#16 + ldrb r4,[r12,#10] + orr r1,r1,r6,lsl#24 + ldrb r5,[r12,#9] + ldrb r6,[r12,#8] + orr r2,r2,r4,lsl#8 + ldrb r3,[r12,#15] + orr r2,r2,r5,lsl#16 + ldrb r4,[r12,#14] + orr r2,r2,r6,lsl#24 + ldrb r5,[r12,#13] + ldrb r6,[r12,#12] + orr r3,r3,r4,lsl#8 + orr r3,r3,r5,lsl#16 + orr r3,r3,r6,lsl#24 +#else + ldr r0,[r12,#0] + ldr r1,[r12,#4] + ldr r2,[r12,#8] + ldr r3,[r12,#12] +#ifdef __ARMEL__ + rev r0,r0 + rev r1,r1 + rev r2,r2 + rev r3,r3 +#endif +#endif + bl _armv4_AES_decrypt + + ldr r12,[sp],#4 @ pop out +#if __ARM_ARCH__>=7 +#ifdef __ARMEL__ + rev r0,r0 + rev r1,r1 + rev r2,r2 + rev r3,r3 +#endif + str r0,[r12,#0] + str r1,[r12,#4] + str r2,[r12,#8] + str r3,[r12,#12] +#else + mov r4,r0,lsr#24 @ write output in endian-neutral + mov r5,r0,lsr#16 @ manner... + mov r6,r0,lsr#8 + strb r4,[r12,#0] + strb r5,[r12,#1] + mov r4,r1,lsr#24 + strb r6,[r12,#2] + mov r5,r1,lsr#16 + strb r0,[r12,#3] + mov r6,r1,lsr#8 + strb r4,[r12,#4] + strb r5,[r12,#5] + mov r4,r2,lsr#24 + strb r6,[r12,#6] + mov r5,r2,lsr#16 + strb r1,[r12,#7] + mov r6,r2,lsr#8 + strb r4,[r12,#8] + strb r5,[r12,#9] + mov r4,r3,lsr#24 + strb r6,[r12,#10] + mov r5,r3,lsr#16 + strb r2,[r12,#11] + mov r6,r3,lsr#8 + strb r4,[r12,#12] + strb r5,[r12,#13] + strb r6,[r12,#14] + strb r3,[r12,#15] +#endif +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r12,pc} +#else + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.size AES_decrypt,.-AES_decrypt + +.type _armv4_AES_decrypt,%function +.align 2 +_armv4_AES_decrypt: + str lr,[sp,#-4]! @ push lr + ldmia r11!,{r4-r7} + eor r0,r0,r4 + ldr r12,[r11,#240-16] + eor r1,r1,r5 + eor r2,r2,r6 + eor r3,r3,r7 + sub r12,r12,#1 + mov lr,#255 + + and r7,lr,r0,lsr#16 + and r8,lr,r0,lsr#8 + and r9,lr,r0 + mov r0,r0,lsr#24 +.Ldec_loop: + ldr r4,[r10,r7,lsl#2] @ Td1[s0>>16] + and r7,lr,r1 @ i0 + ldr r5,[r10,r8,lsl#2] @ Td2[s0>>8] + and r8,lr,r1,lsr#16 + ldr r6,[r10,r9,lsl#2] @ Td3[s0>>0] + and r9,lr,r1,lsr#8 + ldr r0,[r10,r0,lsl#2] @ Td0[s0>>24] + mov r1,r1,lsr#24 + + ldr r7,[r10,r7,lsl#2] @ Td3[s1>>0] + ldr r8,[r10,r8,lsl#2] @ Td1[s1>>16] + ldr r9,[r10,r9,lsl#2] @ Td2[s1>>8] + eor r0,r0,r7,ror#24 + ldr r1,[r10,r1,lsl#2] @ Td0[s1>>24] + and r7,lr,r2,lsr#8 @ i0 + eor r5,r8,r5,ror#8 + and r8,lr,r2 @ i1 + eor r6,r9,r6,ror#8 + and r9,lr,r2,lsr#16 + ldr r7,[r10,r7,lsl#2] @ Td2[s2>>8] + eor r1,r1,r4,ror#8 + ldr r8,[r10,r8,lsl#2] @ Td3[s2>>0] + mov r2,r2,lsr#24 + + ldr r9,[r10,r9,lsl#2] @ Td1[s2>>16] + eor r0,r0,r7,ror#16 + ldr r2,[r10,r2,lsl#2] @ Td0[s2>>24] + and r7,lr,r3,lsr#16 @ i0 + eor r1,r1,r8,ror#24 + and r8,lr,r3,lsr#8 @ i1 + eor r6,r9,r6,ror#8 + and r9,lr,r3 @ i2 + ldr r7,[r10,r7,lsl#2] @ Td1[s3>>16] + eor r2,r2,r5,ror#8 + ldr r8,[r10,r8,lsl#2] @ Td2[s3>>8] + mov r3,r3,lsr#24 + + ldr r9,[r10,r9,lsl#2] @ Td3[s3>>0] + eor r0,r0,r7,ror#8 + ldr r7,[r11],#16 + eor r1,r1,r8,ror#16 + ldr r3,[r10,r3,lsl#2] @ Td0[s3>>24] + eor r2,r2,r9,ror#24 + + ldr r4,[r11,#-12] + eor r0,r0,r7 + ldr r5,[r11,#-8] + eor r3,r3,r6,ror#8 + ldr r6,[r11,#-4] + and r7,lr,r0,lsr#16 + eor r1,r1,r4 + and r8,lr,r0,lsr#8 + eor r2,r2,r5 + and r9,lr,r0 + eor r3,r3,r6 + mov r0,r0,lsr#24 + + subs r12,r12,#1 + bne .Ldec_loop + + add r10,r10,#1024 + + ldr r5,[r10,#0] @ prefetch Td4 + ldr r6,[r10,#32] + ldr r4,[r10,#64] + ldr r5,[r10,#96] + ldr r6,[r10,#128] + ldr r4,[r10,#160] + ldr r5,[r10,#192] + ldr r6,[r10,#224] + + ldrb r0,[r10,r0] @ Td4[s0>>24] + ldrb r4,[r10,r7] @ Td4[s0>>16] + and r7,lr,r1 @ i0 + ldrb r5,[r10,r8] @ Td4[s0>>8] + and r8,lr,r1,lsr#16 + ldrb r6,[r10,r9] @ Td4[s0>>0] + and r9,lr,r1,lsr#8 + + ldrb r7,[r10,r7] @ Td4[s1>>0] + ldrb r1,[r10,r1,lsr#24] @ Td4[s1>>24] + ldrb r8,[r10,r8] @ Td4[s1>>16] + eor r0,r7,r0,lsl#24 + ldrb r9,[r10,r9] @ Td4[s1>>8] + eor r1,r4,r1,lsl#8 + and r7,lr,r2,lsr#8 @ i0 + eor r5,r5,r8,lsl#8 + and r8,lr,r2 @ i1 + ldrb r7,[r10,r7] @ Td4[s2>>8] + eor r6,r6,r9,lsl#8 + ldrb r8,[r10,r8] @ Td4[s2>>0] + and r9,lr,r2,lsr#16 + + ldrb r2,[r10,r2,lsr#24] @ Td4[s2>>24] + eor r0,r0,r7,lsl#8 + ldrb r9,[r10,r9] @ Td4[s2>>16] + eor r1,r8,r1,lsl#16 + and r7,lr,r3,lsr#16 @ i0 + eor r2,r5,r2,lsl#16 + and r8,lr,r3,lsr#8 @ i1 + ldrb r7,[r10,r7] @ Td4[s3>>16] + eor r6,r6,r9,lsl#16 + ldrb r8,[r10,r8] @ Td4[s3>>8] + and r9,lr,r3 @ i2 + + ldrb r9,[r10,r9] @ Td4[s3>>0] + ldrb r3,[r10,r3,lsr#24] @ Td4[s3>>24] + eor r0,r0,r7,lsl#16 + ldr r7,[r11,#0] + eor r1,r1,r8,lsl#8 + ldr r4,[r11,#4] + eor r2,r9,r2,lsl#8 + ldr r5,[r11,#8] + eor r3,r6,r3,lsl#24 + ldr r6,[r11,#12] + + eor r0,r0,r7 + eor r1,r1,r4 + eor r2,r2,r5 + eor r3,r3,r6 + + sub r10,r10,#1024 + ldr pc,[sp],#4 @ pop and return +.size _armv4_AES_decrypt,.-_armv4_AES_decrypt +.asciz "AES for ARMv4, CRYPTOGAMS by " +.align 2 diff --git a/arch/arm/crypto/aes_glue.c b/arch/arm/crypto/aes_glue.c new file mode 100644 index 0000000000000000000000000000000000000000..59f7877ead6ac9ee3f8a31b43c6e0458de26cd8f --- /dev/null +++ b/arch/arm/crypto/aes_glue.c @@ -0,0 +1,108 @@ +/* + * Glue Code for the asm optimized version of the AES Cipher Algorithm + */ + +#include +#include +#include + +#define AES_MAXNR 14 + +typedef struct { + unsigned int rd_key[4 *(AES_MAXNR + 1)]; + int rounds; +} AES_KEY; + +struct AES_CTX { + AES_KEY enc_key; + AES_KEY dec_key; +}; + +asmlinkage void AES_encrypt(const u8 *in, u8 *out, AES_KEY *ctx); +asmlinkage void AES_decrypt(const u8 *in, u8 *out, AES_KEY *ctx); +asmlinkage int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key); +asmlinkage int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key); + +static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) +{ + struct AES_CTX *ctx = crypto_tfm_ctx(tfm); + AES_encrypt(src, dst, &ctx->enc_key); +} + +static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) +{ + struct AES_CTX *ctx = crypto_tfm_ctx(tfm); + AES_decrypt(src, dst, &ctx->dec_key); +} + +static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, + unsigned int key_len) +{ + struct AES_CTX *ctx = crypto_tfm_ctx(tfm); + + switch (key_len) { + case AES_KEYSIZE_128: + key_len = 128; + break; + case AES_KEYSIZE_192: + key_len = 192; + break; + case AES_KEYSIZE_256: + key_len = 256; + break; + default: + tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; + } + + if (private_AES_set_encrypt_key(in_key, key_len, &ctx->enc_key) == -1) { + tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; + } + /* private_AES_set_decrypt_key expects an encryption key as input */ + ctx->dec_key = ctx->enc_key; + if (private_AES_set_decrypt_key(in_key, key_len, &ctx->dec_key) == -1) { + tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; + } + return 0; +} + +static struct crypto_alg aes_alg = { + .cra_name = "aes", + .cra_driver_name = "aes-asm", + .cra_priority = 200, + .cra_flags = CRYPTO_ALG_TYPE_CIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct AES_CTX), + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(aes_alg.cra_list), + .cra_u = { + .cipher = { + .cia_min_keysize = AES_MIN_KEY_SIZE, + .cia_max_keysize = AES_MAX_KEY_SIZE, + .cia_setkey = aes_set_key, + .cia_encrypt = aes_encrypt, + .cia_decrypt = aes_decrypt + } + } +}; + +static int __init aes_init(void) +{ + return crypto_register_alg(&aes_alg); +} + +static void __exit aes_fini(void) +{ + crypto_unregister_alg(&aes_alg); +} + +module_init(aes_init); +module_exit(aes_fini); + +MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm (ASM)"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("aes"); +MODULE_ALIAS("aes-asm"); +MODULE_AUTHOR("David McCullough "); diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S new file mode 100644 index 0000000000000000000000000000000000000000..7050ab133b9da66561d53f46f07f5974a16ccf7c --- /dev/null +++ b/arch/arm/crypto/sha1-armv4-large.S @@ -0,0 +1,503 @@ +#define __ARM_ARCH__ __LINUX_ARM_ARCH__ +@ ==================================================================== +@ Written by Andy Polyakov for the OpenSSL +@ project. The module is, however, dual licensed under OpenSSL and +@ CRYPTOGAMS licenses depending on where you obtain it. For further +@ details see http://www.openssl.org/~appro/cryptogams/. +@ ==================================================================== + +@ sha1_block procedure for ARMv4. +@ +@ January 2007. + +@ Size/performance trade-off +@ ==================================================================== +@ impl size in bytes comp cycles[*] measured performance +@ ==================================================================== +@ thumb 304 3212 4420 +@ armv4-small 392/+29% 1958/+64% 2250/+96% +@ armv4-compact 740/+89% 1552/+26% 1840/+22% +@ armv4-large 1420/+92% 1307/+19% 1370/+34%[***] +@ full unroll ~5100/+260% ~1260/+4% ~1300/+5% +@ ==================================================================== +@ thumb = same as 'small' but in Thumb instructions[**] and +@ with recurring code in two private functions; +@ small = detached Xload/update, loops are folded; +@ compact = detached Xload/update, 5x unroll; +@ large = interleaved Xload/update, 5x unroll; +@ full unroll = interleaved Xload/update, full unroll, estimated[!]; +@ +@ [*] Manually counted instructions in "grand" loop body. Measured +@ performance is affected by prologue and epilogue overhead, +@ i-cache availability, branch penalties, etc. +@ [**] While each Thumb instruction is twice smaller, they are not as +@ diverse as ARM ones: e.g., there are only two arithmetic +@ instructions with 3 arguments, no [fixed] rotate, addressing +@ modes are limited. As result it takes more instructions to do +@ the same job in Thumb, therefore the code is never twice as +@ small and always slower. +@ [***] which is also ~35% better than compiler generated code. Dual- +@ issue Cortex A8 core was measured to process input block in +@ ~990 cycles. + +@ August 2010. +@ +@ Rescheduling for dual-issue pipeline resulted in 13% improvement on +@ Cortex A8 core and in absolute terms ~870 cycles per input block +@ [or 13.6 cycles per byte]. + +@ February 2011. +@ +@ Profiler-assisted and platform-specific optimization resulted in 10% +@ improvement on Cortex A8 core and 12.2 cycles per byte. + +.text + +.global sha1_block_data_order +.type sha1_block_data_order,%function + +.align 2 +sha1_block_data_order: + stmdb sp!,{r4-r12,lr} + add r2,r1,r2,lsl#6 @ r2 to point at the end of r1 + ldmia r0,{r3,r4,r5,r6,r7} +.Lloop: + ldr r8,.LK_00_19 + mov r14,sp + sub sp,sp,#15*4 + mov r5,r5,ror#30 + mov r6,r6,ror#30 + mov r7,r7,ror#30 @ [6] +.L_00_15: +#if __ARM_ARCH__<7 + ldrb r10,[r1,#2] + ldrb r9,[r1,#3] + ldrb r11,[r1,#1] + add r7,r8,r7,ror#2 @ E+=K_00_19 + ldrb r12,[r1],#4 + orr r9,r9,r10,lsl#8 + eor r10,r5,r6 @ F_xx_xx + orr r9,r9,r11,lsl#16 + add r7,r7,r3,ror#27 @ E+=ROR(A,27) + orr r9,r9,r12,lsl#24 +#else + ldr r9,[r1],#4 @ handles unaligned + add r7,r8,r7,ror#2 @ E+=K_00_19 + eor r10,r5,r6 @ F_xx_xx + add r7,r7,r3,ror#27 @ E+=ROR(A,27) +#ifdef __ARMEL__ + rev r9,r9 @ byte swap +#endif +#endif + and r10,r4,r10,ror#2 + add r7,r7,r9 @ E+=X[i] + eor r10,r10,r6,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r7,r7,r10 @ E+=F_00_19(B,C,D) +#if __ARM_ARCH__<7 + ldrb r10,[r1,#2] + ldrb r9,[r1,#3] + ldrb r11,[r1,#1] + add r6,r8,r6,ror#2 @ E+=K_00_19 + ldrb r12,[r1],#4 + orr r9,r9,r10,lsl#8 + eor r10,r4,r5 @ F_xx_xx + orr r9,r9,r11,lsl#16 + add r6,r6,r7,ror#27 @ E+=ROR(A,27) + orr r9,r9,r12,lsl#24 +#else + ldr r9,[r1],#4 @ handles unaligned + add r6,r8,r6,ror#2 @ E+=K_00_19 + eor r10,r4,r5 @ F_xx_xx + add r6,r6,r7,ror#27 @ E+=ROR(A,27) +#ifdef __ARMEL__ + rev r9,r9 @ byte swap +#endif +#endif + and r10,r3,r10,ror#2 + add r6,r6,r9 @ E+=X[i] + eor r10,r10,r5,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r6,r6,r10 @ E+=F_00_19(B,C,D) +#if __ARM_ARCH__<7 + ldrb r10,[r1,#2] + ldrb r9,[r1,#3] + ldrb r11,[r1,#1] + add r5,r8,r5,ror#2 @ E+=K_00_19 + ldrb r12,[r1],#4 + orr r9,r9,r10,lsl#8 + eor r10,r3,r4 @ F_xx_xx + orr r9,r9,r11,lsl#16 + add r5,r5,r6,ror#27 @ E+=ROR(A,27) + orr r9,r9,r12,lsl#24 +#else + ldr r9,[r1],#4 @ handles unaligned + add r5,r8,r5,ror#2 @ E+=K_00_19 + eor r10,r3,r4 @ F_xx_xx + add r5,r5,r6,ror#27 @ E+=ROR(A,27) +#ifdef __ARMEL__ + rev r9,r9 @ byte swap +#endif +#endif + and r10,r7,r10,ror#2 + add r5,r5,r9 @ E+=X[i] + eor r10,r10,r4,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r5,r5,r10 @ E+=F_00_19(B,C,D) +#if __ARM_ARCH__<7 + ldrb r10,[r1,#2] + ldrb r9,[r1,#3] + ldrb r11,[r1,#1] + add r4,r8,r4,ror#2 @ E+=K_00_19 + ldrb r12,[r1],#4 + orr r9,r9,r10,lsl#8 + eor r10,r7,r3 @ F_xx_xx + orr r9,r9,r11,lsl#16 + add r4,r4,r5,ror#27 @ E+=ROR(A,27) + orr r9,r9,r12,lsl#24 +#else + ldr r9,[r1],#4 @ handles unaligned + add r4,r8,r4,ror#2 @ E+=K_00_19 + eor r10,r7,r3 @ F_xx_xx + add r4,r4,r5,ror#27 @ E+=ROR(A,27) +#ifdef __ARMEL__ + rev r9,r9 @ byte swap +#endif +#endif + and r10,r6,r10,ror#2 + add r4,r4,r9 @ E+=X[i] + eor r10,r10,r3,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r4,r4,r10 @ E+=F_00_19(B,C,D) +#if __ARM_ARCH__<7 + ldrb r10,[r1,#2] + ldrb r9,[r1,#3] + ldrb r11,[r1,#1] + add r3,r8,r3,ror#2 @ E+=K_00_19 + ldrb r12,[r1],#4 + orr r9,r9,r10,lsl#8 + eor r10,r6,r7 @ F_xx_xx + orr r9,r9,r11,lsl#16 + add r3,r3,r4,ror#27 @ E+=ROR(A,27) + orr r9,r9,r12,lsl#24 +#else + ldr r9,[r1],#4 @ handles unaligned + add r3,r8,r3,ror#2 @ E+=K_00_19 + eor r10,r6,r7 @ F_xx_xx + add r3,r3,r4,ror#27 @ E+=ROR(A,27) +#ifdef __ARMEL__ + rev r9,r9 @ byte swap +#endif +#endif + and r10,r5,r10,ror#2 + add r3,r3,r9 @ E+=X[i] + eor r10,r10,r7,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r3,r3,r10 @ E+=F_00_19(B,C,D) + teq r14,sp + bne .L_00_15 @ [((11+4)*5+2)*3] +#if __ARM_ARCH__<7 + ldrb r10,[r1,#2] + ldrb r9,[r1,#3] + ldrb r11,[r1,#1] + add r7,r8,r7,ror#2 @ E+=K_00_19 + ldrb r12,[r1],#4 + orr r9,r9,r10,lsl#8 + eor r10,r5,r6 @ F_xx_xx + orr r9,r9,r11,lsl#16 + add r7,r7,r3,ror#27 @ E+=ROR(A,27) + orr r9,r9,r12,lsl#24 +#else + ldr r9,[r1],#4 @ handles unaligned + add r7,r8,r7,ror#2 @ E+=K_00_19 + eor r10,r5,r6 @ F_xx_xx + add r7,r7,r3,ror#27 @ E+=ROR(A,27) +#ifdef __ARMEL__ + rev r9,r9 @ byte swap +#endif +#endif + and r10,r4,r10,ror#2 + add r7,r7,r9 @ E+=X[i] + eor r10,r10,r6,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r7,r7,r10 @ E+=F_00_19(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r6,r8,r6,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r4,r5 @ F_xx_xx + mov r9,r9,ror#31 + add r6,r6,r7,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r3,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r6,r6,r9 @ E+=X[i] + eor r10,r10,r5,ror#2 @ F_00_19(B,C,D) + add r6,r6,r10 @ E+=F_00_19(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r5,r8,r5,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r3,r4 @ F_xx_xx + mov r9,r9,ror#31 + add r5,r5,r6,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r7,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r5,r5,r9 @ E+=X[i] + eor r10,r10,r4,ror#2 @ F_00_19(B,C,D) + add r5,r5,r10 @ E+=F_00_19(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r4,r8,r4,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r7,r3 @ F_xx_xx + mov r9,r9,ror#31 + add r4,r4,r5,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r6,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r4,r4,r9 @ E+=X[i] + eor r10,r10,r3,ror#2 @ F_00_19(B,C,D) + add r4,r4,r10 @ E+=F_00_19(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r3,r8,r3,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r6,r7 @ F_xx_xx + mov r9,r9,ror#31 + add r3,r3,r4,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r5,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r3,r3,r9 @ E+=X[i] + eor r10,r10,r7,ror#2 @ F_00_19(B,C,D) + add r3,r3,r10 @ E+=F_00_19(B,C,D) + + ldr r8,.LK_20_39 @ [+15+16*4] + sub sp,sp,#25*4 + cmn sp,#0 @ [+3], clear carry to denote 20_39 +.L_20_39_or_60_79: + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r7,r8,r7,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r5,r6 @ F_xx_xx + mov r9,r9,ror#31 + add r7,r7,r3,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + eor r10,r4,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r7,r7,r9 @ E+=X[i] + add r7,r7,r10 @ E+=F_20_39(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r6,r8,r6,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r4,r5 @ F_xx_xx + mov r9,r9,ror#31 + add r6,r6,r7,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + eor r10,r3,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r6,r6,r9 @ E+=X[i] + add r6,r6,r10 @ E+=F_20_39(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r5,r8,r5,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r3,r4 @ F_xx_xx + mov r9,r9,ror#31 + add r5,r5,r6,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + eor r10,r7,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r5,r5,r9 @ E+=X[i] + add r5,r5,r10 @ E+=F_20_39(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r4,r8,r4,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r7,r3 @ F_xx_xx + mov r9,r9,ror#31 + add r4,r4,r5,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + eor r10,r6,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r4,r4,r9 @ E+=X[i] + add r4,r4,r10 @ E+=F_20_39(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r3,r8,r3,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r6,r7 @ F_xx_xx + mov r9,r9,ror#31 + add r3,r3,r4,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + eor r10,r5,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r3,r3,r9 @ E+=X[i] + add r3,r3,r10 @ E+=F_20_39(B,C,D) + teq r14,sp @ preserve carry + bne .L_20_39_or_60_79 @ [+((12+3)*5+2)*4] + bcs .L_done @ [+((12+3)*5+2)*4], spare 300 bytes + + ldr r8,.LK_40_59 + sub sp,sp,#20*4 @ [+2] +.L_40_59: + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r7,r8,r7,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r5,r6 @ F_xx_xx + mov r9,r9,ror#31 + add r7,r7,r3,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r4,r10,ror#2 @ F_xx_xx + and r11,r5,r6 @ F_xx_xx + add r7,r7,r9 @ E+=X[i] + add r7,r7,r10 @ E+=F_40_59(B,C,D) + add r7,r7,r11,ror#2 + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r6,r8,r6,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r4,r5 @ F_xx_xx + mov r9,r9,ror#31 + add r6,r6,r7,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r3,r10,ror#2 @ F_xx_xx + and r11,r4,r5 @ F_xx_xx + add r6,r6,r9 @ E+=X[i] + add r6,r6,r10 @ E+=F_40_59(B,C,D) + add r6,r6,r11,ror#2 + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r5,r8,r5,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r3,r4 @ F_xx_xx + mov r9,r9,ror#31 + add r5,r5,r6,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r7,r10,ror#2 @ F_xx_xx + and r11,r3,r4 @ F_xx_xx + add r5,r5,r9 @ E+=X[i] + add r5,r5,r10 @ E+=F_40_59(B,C,D) + add r5,r5,r11,ror#2 + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r4,r8,r4,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r7,r3 @ F_xx_xx + mov r9,r9,ror#31 + add r4,r4,r5,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r6,r10,ror#2 @ F_xx_xx + and r11,r7,r3 @ F_xx_xx + add r4,r4,r9 @ E+=X[i] + add r4,r4,r10 @ E+=F_40_59(B,C,D) + add r4,r4,r11,ror#2 + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r3,r8,r3,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r6,r7 @ F_xx_xx + mov r9,r9,ror#31 + add r3,r3,r4,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r5,r10,ror#2 @ F_xx_xx + and r11,r6,r7 @ F_xx_xx + add r3,r3,r9 @ E+=X[i] + add r3,r3,r10 @ E+=F_40_59(B,C,D) + add r3,r3,r11,ror#2 + teq r14,sp + bne .L_40_59 @ [+((12+5)*5+2)*4] + + ldr r8,.LK_60_79 + sub sp,sp,#20*4 + cmp sp,#0 @ set carry to denote 60_79 + b .L_20_39_or_60_79 @ [+4], spare 300 bytes +.L_done: + add sp,sp,#80*4 @ "deallocate" stack frame + ldmia r0,{r8,r9,r10,r11,r12} + add r3,r8,r3 + add r4,r9,r4 + add r5,r10,r5,ror#2 + add r6,r11,r6,ror#2 + add r7,r12,r7,ror#2 + stmia r0,{r3,r4,r5,r6,r7} + teq r1,r2 + bne .Lloop @ [+18], total 1307 + +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r12,pc} +#else + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.align 2 +.LK_00_19: .word 0x5a827999 +.LK_20_39: .word 0x6ed9eba1 +.LK_40_59: .word 0x8f1bbcdc +.LK_60_79: .word 0xca62c1d6 +.size sha1_block_data_order,.-sha1_block_data_order +.asciz "SHA1 block transform for ARMv4, CRYPTOGAMS by " +.align 2 diff --git a/arch/arm/crypto/sha1_glue.c b/arch/arm/crypto/sha1_glue.c new file mode 100644 index 0000000000000000000000000000000000000000..76cd976230bc4b7558c18a50daaa5278fe85565f --- /dev/null +++ b/arch/arm/crypto/sha1_glue.c @@ -0,0 +1,179 @@ +/* + * Cryptographic API. + * Glue code for the SHA1 Secure Hash Algorithm assembler implementation + * + * This file is based on sha1_generic.c and sha1_ssse3_glue.c + * + * Copyright (c) Alan Smithee. + * Copyright (c) Andrew McDonald + * Copyright (c) Jean-Francois Dive + * Copyright (c) Mathias Krause + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +struct SHA1_CTX { + uint32_t h0,h1,h2,h3,h4; + u64 count; + u8 data[SHA1_BLOCK_SIZE]; +}; + +asmlinkage void sha1_block_data_order(struct SHA1_CTX *digest, + const unsigned char *data, unsigned int rounds); + + +static int sha1_init(struct shash_desc *desc) +{ + struct SHA1_CTX *sctx = shash_desc_ctx(desc); + memset(sctx, 0, sizeof(*sctx)); + sctx->h0 = SHA1_H0; + sctx->h1 = SHA1_H1; + sctx->h2 = SHA1_H2; + sctx->h3 = SHA1_H3; + sctx->h4 = SHA1_H4; + return 0; +} + + +static int __sha1_update(struct SHA1_CTX *sctx, const u8 *data, + unsigned int len, unsigned int partial) +{ + unsigned int done = 0; + + sctx->count += len; + + if (partial) { + done = SHA1_BLOCK_SIZE - partial; + memcpy(sctx->data + partial, data, done); + sha1_block_data_order(sctx, sctx->data, 1); + } + + if (len - done >= SHA1_BLOCK_SIZE) { + const unsigned int rounds = (len - done) / SHA1_BLOCK_SIZE; + sha1_block_data_order(sctx, data + done, rounds); + done += rounds * SHA1_BLOCK_SIZE; + } + + memcpy(sctx->data, data + done, len - done); + return 0; +} + + +static int sha1_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct SHA1_CTX *sctx = shash_desc_ctx(desc); + unsigned int partial = sctx->count % SHA1_BLOCK_SIZE; + int res; + + /* Handle the fast case right here */ + if (partial + len < SHA1_BLOCK_SIZE) { + sctx->count += len; + memcpy(sctx->data + partial, data, len); + return 0; + } + res = __sha1_update(sctx, data, len, partial); + return res; +} + + +/* Add padding and return the message digest. */ +static int sha1_final(struct shash_desc *desc, u8 *out) +{ + struct SHA1_CTX *sctx = shash_desc_ctx(desc); + unsigned int i, index, padlen; + __be32 *dst = (__be32 *)out; + __be64 bits; + static const u8 padding[SHA1_BLOCK_SIZE] = { 0x80, }; + + bits = cpu_to_be64(sctx->count << 3); + + /* Pad out to 56 mod 64 and append length */ + index = sctx->count % SHA1_BLOCK_SIZE; + padlen = (index < 56) ? (56 - index) : ((SHA1_BLOCK_SIZE+56) - index); + /* We need to fill a whole block for __sha1_update() */ + if (padlen <= 56) { + sctx->count += padlen; + memcpy(sctx->data + index, padding, padlen); + } else { + __sha1_update(sctx, padding, padlen, index); + } + __sha1_update(sctx, (const u8 *)&bits, sizeof(bits), 56); + + /* Store state in digest */ + for (i = 0; i < 5; i++) + dst[i] = cpu_to_be32(((u32 *)sctx)[i]); + + /* Wipe context */ + memset(sctx, 0, sizeof(*sctx)); + return 0; +} + + +static int sha1_export(struct shash_desc *desc, void *out) +{ + struct SHA1_CTX *sctx = shash_desc_ctx(desc); + memcpy(out, sctx, sizeof(*sctx)); + return 0; +} + + +static int sha1_import(struct shash_desc *desc, const void *in) +{ + struct SHA1_CTX *sctx = shash_desc_ctx(desc); + memcpy(sctx, in, sizeof(*sctx)); + return 0; +} + + +static struct shash_alg alg = { + .digestsize = SHA1_DIGEST_SIZE, + .init = sha1_init, + .update = sha1_update, + .final = sha1_final, + .export = sha1_export, + .import = sha1_import, + .descsize = sizeof(struct SHA1_CTX), + .statesize = sizeof(struct SHA1_CTX), + .base = { + .cra_name = "sha1", + .cra_driver_name= "sha1-asm", + .cra_priority = 150, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}; + + +static int __init sha1_mod_init(void) +{ + return crypto_register_shash(&alg); +} + + +static void __exit sha1_mod_fini(void) +{ + crypto_unregister_shash(&alg); +} + + +module_init(sha1_mod_init); +module_exit(sha1_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm (ARM)"); +MODULE_ALIAS("sha1"); +MODULE_AUTHOR("David McCullough "); diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 960abceb8e14dd878fd7b5cf979a3c318021f0f4..8a7196ca5106a46ea1c7c30825306f11cb355108 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -5,16 +5,33 @@ header-y += hwcap.h generic-y += auxvec.h generic-y += bitsperlong.h generic-y += cputime.h +generic-y += current.h generic-y += emergency-restart.h generic-y += errno.h +generic-y += exec.h generic-y += ioctl.h +generic-y += ipcbuf.h generic-y += irq_regs.h generic-y += kdebug.h generic-y += local.h generic-y += local64.h +generic-y += msgbuf.h +generic-y += param.h +generic-y += parport.h generic-y += percpu.h generic-y += poll.h generic-y += resource.h generic-y += sections.h +generic-y += segment.h +generic-y += sembuf.h +generic-y += serial.h +generic-y += shmbuf.h generic-y += siginfo.h generic-y += sizes.h +generic-y += socket.h +generic-y += sockios.h +generic-y += termbits.h +generic-y += termios.h +generic-y += timex.h +generic-y += types.h +generic-y += unaligned.h diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index 62e75475e57eaa804f209585673eb20e4b776437..d40229d9a1c98f839e1cf52e359502babea2c5dd 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -2,11 +2,12 @@ #define __ASMARM_ARCH_TIMER_H #include +#include #ifdef CONFIG_ARM_ARCH_TIMER -#define ARCH_HAS_READ_CURRENT_TIMER int arch_timer_of_register(void); int arch_timer_sched_clock_init(void); +struct timecounter *arch_timer_get_timecounter(void); #else static inline int arch_timer_of_register(void) { @@ -17,6 +18,11 @@ static inline int arch_timer_sched_clock_init(void) { return -ENXIO; } + +static inline struct timecounter *arch_timer_get_timecounter(void) +{ + return NULL; +} #endif #endif diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 03fb93621d0d6046b7b416c9c4328437380fd843..5c8b3bf4d8252f1013af6fea25848ce9c41dcfeb 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -320,4 +320,12 @@ .size \name , . - \name .endm + .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req +#ifndef CONFIG_CPU_USE_DOMAINS + adds \tmp, \addr, #\size - 1 + sbcccs \tmp, \tmp, \limit + bcs \bad +#endif + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h index 05112380dc5398dd47cbd9fb6adf564f96a4c94c..8dcd9c702d90c9c352d85595d0ea8f83a42f215e 100644 --- a/arch/arm/include/asm/barrier.h +++ b/arch/arm/include/asm/barrier.h @@ -44,10 +44,9 @@ #define rmb() dsb() #define wmb() mb() #else -#include -#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) +#define mb() barrier() +#define rmb() barrier() +#define wmb() barrier() #endif #ifndef CONFIG_SMP diff --git a/arch/arm/include/asm/current.h b/arch/arm/include/asm/current.h deleted file mode 100644 index 75d21e2a3ff7b2b02d122ac1a08b0155cd86dd1b..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/current.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ASMARM_CURRENT_H -#define _ASMARM_CURRENT_H - -#include - -static inline struct task_struct *get_current(void) __attribute_const__; - -static inline struct task_struct *get_current(void) -{ - return current_thread_info()->task; -} - -#define current (get_current()) - -#endif /* _ASMARM_CURRENT_H */ diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h index dc6145120de32d8e1d583f45bbef878365a752e5..ab98fdd083bd35064c8e10d04ec041e21c694432 100644 --- a/arch/arm/include/asm/delay.h +++ b/arch/arm/include/asm/delay.h @@ -15,6 +15,11 @@ #ifndef __ASSEMBLY__ +struct delay_timer { + unsigned long (*read_current_timer)(void); + unsigned long freq; +}; + extern struct arm_delay_ops { void (*delay)(unsigned long); void (*const_udelay)(unsigned long); @@ -56,6 +61,10 @@ extern void __loop_delay(unsigned long loops); extern void __loop_udelay(unsigned long usecs); extern void __loop_const_udelay(unsigned long); +/* Delay-loop timer registration. */ +#define ARCH_HAS_READ_CURRENT_TIMER +extern void register_current_timer_delay(const struct delay_timer *timer); + #endif /* __ASSEMBLY__ */ #endif /* defined(_ARM_DELAY_H) */ diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 2ae842df455180d3bcd445d339ecd332d3b36c4e..23004847bb057becd348b5d1e870235b633acedd 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -13,6 +13,7 @@ #define DMA_ERROR_CODE (~0) extern struct dma_map_ops arm_dma_ops; +extern struct dma_map_ops arm_coherent_dma_ops; static inline struct dma_map_ops *get_dma_ops(struct device *dev) { @@ -202,6 +203,13 @@ static inline void dma_free_writecombine(struct device *dev, size_t size, return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs); } +/* + * This can be called during early boot to increase the size of the atomic + * coherent DMA pool above the default value of 256KiB. It must be called + * before postcore_initcall. + */ +extern void __init init_dma_coherent_pool_size(unsigned long size); + /* * This can be called during boot to increase the size of the consistent * DMA region above it's default value of 2MB. It must be called before the diff --git a/arch/arm/include/asm/exec.h b/arch/arm/include/asm/exec.h deleted file mode 100644 index 7c4fbef72b3a2d444ea4b2d618cc322be5ffc18c..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/exec.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARM_EXEC_H -#define __ASM_ARM_EXEC_H - -#define arch_align_stack(x) (x) - -#endif /* __ASM_ARM_EXEC_H */ diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index 7e30874377e67bede33d1f4a047bfc4f1de65fc0..4f8d2c0dc4419f702449132e46ae7f89bcf2865a 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -110,19 +110,19 @@ #endif #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) -//# ifdef _CACHE +# ifdef _CACHE # define MULTI_CACHE 1 -//# else -//# define _CACHE v6 -//# endif +# else +# define _CACHE v6 +# endif #endif #if defined(CONFIG_CPU_V7) -//# ifdef _CACHE +# ifdef _CACHE # define MULTI_CACHE 1 -//# else -//# define _CACHE v7 -//# endif +# else +# define _CACHE v7 +# endif #endif #if !defined(_CACHE) && !defined(MULTI_CACHE) diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h index c402e9b31f4c61148ee5466b29f9ec176f11b78f..477e0206e016d1a5075692059fab1d83715ee315 100644 --- a/arch/arm/include/asm/gpio.h +++ b/arch/arm/include/asm/gpio.h @@ -6,7 +6,9 @@ #endif /* not all ARM platforms necessarily support this API ... */ +#ifdef CONFIG_NEED_MACH_GPIO_H #include +#endif #ifndef __ARM_GPIOLIB_COMPLEX /* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */ diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h index 436e60b2cf7a1bad5893ef33e3efac1791cb7ef5..2740c2a2df639361617f6fe484ead14f8625eaf2 100644 --- a/arch/arm/include/asm/hardirq.h +++ b/arch/arm/include/asm/hardirq.h @@ -5,7 +5,7 @@ #include #include -#define NR_IPI 5 +#define NR_IPI 6 typedef struct { unsigned int __softirq_pending; diff --git a/arch/arm/include/asm/hardware/cache-tauros2.h b/arch/arm/include/asm/hardware/cache-tauros2.h index 538f17ca905b1a7c9818496ee4ed50acd9f970a0..295e2e40151b12c0d2ad3ad2c3ced4f8de54e76a 100644 --- a/arch/arm/include/asm/hardware/cache-tauros2.h +++ b/arch/arm/include/asm/hardware/cache-tauros2.h @@ -8,4 +8,7 @@ * warranty of any kind, whether express or implied. */ -extern void __init tauros2_init(void); +#define CACHE_TAUROS2_PREFETCH_ON (1 << 0) +#define CACHE_TAUROS2_LINEFILL_BURST8 (1 << 1) + +extern void __init tauros2_init(unsigned int features); diff --git a/arch/arm/include/asm/hardware/iop3xx.h b/arch/arm/include/asm/hardware/iop3xx.h index 2ff2c75a46391344689893b3132b714ca96b8020..02fe2fbe2477078b4fa8da59c6f2a416fdb71913 100644 --- a/arch/arm/include/asm/hardware/iop3xx.h +++ b/arch/arm/include/asm/hardware/iop3xx.h @@ -217,18 +217,8 @@ extern int iop3xx_get_init_atu(void); #define IOP3XX_PCI_LOWER_MEM_PA 0x80000000 #define IOP3XX_PCI_MEM_WINDOW_SIZE 0x08000000 -#define IOP3XX_PCI_IO_WINDOW_SIZE 0x00010000 #define IOP3XX_PCI_LOWER_IO_PA 0x90000000 -#define IOP3XX_PCI_LOWER_IO_VA 0xfe000000 -#define IOP3XX_PCI_LOWER_IO_BA 0x90000000 -#define IOP3XX_PCI_UPPER_IO_PA (IOP3XX_PCI_LOWER_IO_PA +\ - IOP3XX_PCI_IO_WINDOW_SIZE - 1) -#define IOP3XX_PCI_UPPER_IO_VA (IOP3XX_PCI_LOWER_IO_VA +\ - IOP3XX_PCI_IO_WINDOW_SIZE - 1) -#define IOP3XX_PCI_IO_PHYS_TO_VIRT(addr) (((u32) (addr) -\ - IOP3XX_PCI_LOWER_IO_PA) +\ - IOP3XX_PCI_LOWER_IO_VA) - +#define IOP3XX_PCI_LOWER_IO_BA 0x00000000 #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/hardware/linkup-l1110.h b/arch/arm/include/asm/hardware/linkup-l1110.h deleted file mode 100644 index 7ec91168a576701f0023327a0ccc77d313455925..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/hardware/linkup-l1110.h +++ /dev/null @@ -1,48 +0,0 @@ -/* -* -* Definitions for H3600 Handheld Computer -* -* Copyright 2001 Compaq Computer Corporation. -* -* Use consistent with the GNU GPL is permitted, -* provided that this copyright notice is -* preserved in its entirety in all copies and derived works. -* -* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, -* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS -* FITNESS FOR ANY PARTICULAR PURPOSE. -* -* Author: Jamey Hicks. -* -*/ - -/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */ - -/* PC Card Status Register */ -#define LINKUP_PRS_S1 (1 << 0) /* voltage control bits S1-S4 */ -#define LINKUP_PRS_S2 (1 << 1) -#define LINKUP_PRS_S3 (1 << 2) -#define LINKUP_PRS_S4 (1 << 3) -#define LINKUP_PRS_BVD1 (1 << 4) -#define LINKUP_PRS_BVD2 (1 << 5) -#define LINKUP_PRS_VS1 (1 << 6) -#define LINKUP_PRS_VS2 (1 << 7) -#define LINKUP_PRS_RDY (1 << 8) -#define LINKUP_PRS_CD1 (1 << 9) -#define LINKUP_PRS_CD2 (1 << 10) - -/* PC Card Command Register */ -#define LINKUP_PRC_S1 (1 << 0) -#define LINKUP_PRC_S2 (1 << 1) -#define LINKUP_PRC_S3 (1 << 2) -#define LINKUP_PRC_S4 (1 << 3) -#define LINKUP_PRC_RESET (1 << 4) -#define LINKUP_PRC_APOE (1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */ -#define LINKUP_PRC_CFE (1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */ -#define LINKUP_PRC_SOE (1 << 7) /* signal output driver enable */ -#define LINKUP_PRC_SSP (1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */ -#define LINKUP_PRC_MBZ (1 << 15) /* must be zero */ - -struct linkup_l1110 { - volatile short prc; -}; diff --git a/arch/arm/include/asm/hypervisor.h b/arch/arm/include/asm/hypervisor.h new file mode 100644 index 0000000000000000000000000000000000000000..b90d9e523d6f218663dcc7a54a48def5c8dae7c4 --- /dev/null +++ b/arch/arm/include/asm/hypervisor.h @@ -0,0 +1,6 @@ +#ifndef _ASM_ARM_HYPERVISOR_H +#define _ASM_ARM_HYPERVISOR_H + +#include + +#endif diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 815c669fec0a1f52665120604c774dbb6e9b2e41..35c1ed89b93652688dc99ede919b55b0d5051b1d 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -47,13 +47,68 @@ extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen); extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); -#define __raw_writeb(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned char __force *)(a) = (v))) -#define __raw_writew(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))) -#define __raw_writel(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned int __force *)(a) = (v))) +#if __LINUX_ARM_ARCH__ < 6 +/* + * Half-word accesses are problematic with RiscPC due to limitations of + * the bus. Rather than special-case the machine, just let the compiler + * generate the access for CPUs prior to ARMv6. + */ +#define __raw_readw(a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a)) +#define __raw_writew(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))) +#else +/* + * When running under a hypervisor, we want to avoid I/O accesses with + * writeback addressing modes as these incur a significant performance + * overhead (the address generation must be emulated in software). + */ +static inline void __raw_writew(u16 val, volatile void __iomem *addr) +{ + asm volatile("strh %1, %0" + : "+Qo" (*(volatile u16 __force *)addr) + : "r" (val)); +} + +static inline u16 __raw_readw(const volatile void __iomem *addr) +{ + u16 val; + asm volatile("ldrh %1, %0" + : "+Qo" (*(volatile u16 __force *)addr), + "=r" (val)); + return val; +} +#endif + +static inline void __raw_writeb(u8 val, volatile void __iomem *addr) +{ + asm volatile("strb %1, %0" + : "+Qo" (*(volatile u8 __force *)addr) + : "r" (val)); +} + +static inline void __raw_writel(u32 val, volatile void __iomem *addr) +{ + asm volatile("str %1, %0" + : "+Qo" (*(volatile u32 __force *)addr) + : "r" (val)); +} + +static inline u8 __raw_readb(const volatile void __iomem *addr) +{ + u8 val; + asm volatile("ldrb %1, %0" + : "+Qo" (*(volatile u8 __force *)addr), + "=r" (val)); + return val; +} -#define __raw_readb(a) (__chk_io_ptr(a), *(volatile unsigned char __force *)(a)) -#define __raw_readw(a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a)) -#define __raw_readl(a) (__chk_io_ptr(a), *(volatile unsigned int __force *)(a)) +static inline u32 __raw_readl(const volatile void __iomem *addr) +{ + u32 val; + asm volatile("ldr %1, %0" + : "+Qo" (*(volatile u32 __force *)addr), + "=r" (val)); + return val; +} /* * Architecture ioremap implementation. @@ -113,11 +168,19 @@ static inline void __iomem *__typesafe_io(unsigned long addr) #define __iowmb() do { } while (0) #endif +/* PCI fixed i/o mapping */ +#define PCI_IO_VIRT_BASE 0xfee00000 + +extern int pci_ioremap_io(unsigned int offset, phys_addr_t phys_addr); + /* * Now, pick up the machine-defined IO definitions */ #ifdef CONFIG_NEED_MACH_IO_H #include +#elif defined(CONFIG_PCI) +#define IO_SPACE_LIMIT ((resource_size_t)0xfffff) +#define __io(a) __typesafe_io(PCI_IO_VIRT_BASE + ((a) & IO_SPACE_LIMIT)) #else #define __io(a) __typesafe_io((a) & IO_SPACE_LIMIT) #endif diff --git a/arch/arm/include/asm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h deleted file mode 100644 index 84c7e51cb6d0befd2b3c013c8bbbbaad6ae02297..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include diff --git a/arch/arm/include/asm/leds.h b/arch/arm/include/asm/leds.h deleted file mode 100644 index c545739f39b7e5761b7611431fd9db55183a5841..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/leds.h +++ /dev/null @@ -1,50 +0,0 @@ -/* - * arch/arm/include/asm/leds.h - * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Event-driven interface for LEDs on machines - * Added led_start and led_stop- Alex Holden, 28th Dec 1998. - */ -#ifndef ASM_ARM_LEDS_H -#define ASM_ARM_LEDS_H - - -typedef enum { - led_idle_start, - led_idle_end, - led_timer, - led_start, - led_stop, - led_claim, /* override idle & timer leds */ - led_release, /* restore idle & timer leds */ - led_start_timer_mode, - led_stop_timer_mode, - led_green_on, - led_green_off, - led_amber_on, - led_amber_off, - led_red_on, - led_red_off, - led_blue_on, - led_blue_off, - /* - * I want this between led_timer and led_start, but - * someone has decided to export this to user space - */ - led_halted -} led_event_t; - -/* Use this routine to handle LEDs */ - -#ifdef CONFIG_LEDS -extern void (*leds_event)(led_event_t); -#else -#define leds_event(e) -#endif - -#endif diff --git a/arch/arm/include/asm/mach/arch.h b/arch/arm/include/asm/mach/arch.h index 0b1c94b8c65226a85b2a8e696ec51c7cfaea6527..917d4fcfd9b4a9512bc26ba9539e5994154e6728 100644 --- a/arch/arm/include/asm/mach/arch.h +++ b/arch/arm/include/asm/mach/arch.h @@ -14,6 +14,12 @@ struct tag; struct meminfo; struct sys_timer; struct pt_regs; +struct smp_operations; +#ifdef CONFIG_SMP +#define smp_ops(ops) (&(ops)) +#else +#define smp_ops(ops) (struct smp_operations *)NULL +#endif struct machine_desc { unsigned int nr; /* architecture number */ @@ -35,6 +41,7 @@ struct machine_desc { unsigned char reserve_lp1 :1; /* never has lp1 */ unsigned char reserve_lp2 :1; /* never has lp2 */ char restart_mode; /* default restart mode */ + struct smp_operations *smp; /* SMP operations */ void (*fixup)(struct tag *, char **, struct meminfo *); void (*reserve)(void);/* reserve mem blocks */ diff --git a/arch/arm/include/asm/mach/map.h b/arch/arm/include/asm/mach/map.h index a6efcdd6fd25135803d906329675f989e3fdb8ea..195ac2f9d3d3b1eaaebca8a2b5260fb41f4e27e0 100644 --- a/arch/arm/include/asm/mach/map.h +++ b/arch/arm/include/asm/mach/map.h @@ -9,6 +9,9 @@ * * Page table mapping constructs and function prototypes */ +#ifndef __ASM_MACH_MAP_H +#define __ASM_MACH_MAP_H + #include struct map_desc { @@ -34,6 +37,8 @@ struct map_desc { #ifdef CONFIG_MMU extern void iotable_init(struct map_desc *, int); +extern void vm_reserve_area_early(unsigned long addr, unsigned long size, + void *caller); struct mem_type; extern const struct mem_type *get_mem_type(unsigned int type); @@ -44,4 +49,7 @@ extern int ioremap_page(unsigned long virt, unsigned long phys, const struct mem_type *mtype); #else #define iotable_init(map,num) do { } while (0) +#define vm_reserve_area_early(a,s,c) do { } while (0) +#endif + #endif diff --git a/arch/arm/include/asm/mach/pci.h b/arch/arm/include/asm/mach/pci.h index 26c511fddf8fdc10ceea18e333de4e1320966e9e..db9fedb57f2c4284d2d456ee0eef29270580579c 100644 --- a/arch/arm/include/asm/mach/pci.h +++ b/arch/arm/include/asm/mach/pci.h @@ -11,6 +11,8 @@ #ifndef __ASM_MACH_PCI_H #define __ASM_MACH_PCI_H +#include + struct pci_sys_data; struct pci_ops; struct pci_bus; @@ -42,6 +44,8 @@ struct pci_sys_data { unsigned long io_offset; /* bus->cpu IO mapping offset */ struct pci_bus *bus; /* PCI bus */ struct list_head resources; /* root bus resources (apertures) */ + struct resource io_res; + char io_res_name[12]; /* Bridge swizzling */ u8 (*swizzle)(struct pci_dev *, u8 *); /* IRQ mapping */ @@ -54,6 +58,15 @@ struct pci_sys_data { */ void pci_common_init(struct hw_pci *); +/* + * Setup early fixed I/O mapping. + */ +#if defined(CONFIG_PCI) +extern void pci_map_io_early(unsigned long pfn); +#else +static inline void pci_map_io_early(unsigned long pfn) {} +#endif + /* * PCI controllers */ diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index e965f1b560f11e3a504814183c98f8f1b11bbf25..73cf03aa981e1b665d9a40f4f80847335ca49441 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x) #define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) #endif #endif +#endif /* __ASSEMBLY__ */ #ifndef PHYS_OFFSET #ifdef PLAT_PHYS_OFFSET @@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x) #endif #endif +#ifndef __ASSEMBLY__ + /* * PFNs are used to describe any physical page; this means * PFN 0 == physical address 0. @@ -272,14 +275,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x) #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) -/* - * Optional coherency support. Currently used only by selected - * Intel XSC3-based systems. - */ -#ifndef arch_is_coherent -#define arch_is_coherent() 0 -#endif - #endif #include diff --git a/arch/arm/include/asm/msgbuf.h b/arch/arm/include/asm/msgbuf.h deleted file mode 100644 index 33b35b946eaaea5e4b4b74c6da35a918f7c6a6a6..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ASMARM_MSGBUF_H -#define _ASMARM_MSGBUF_H - -/* - * The msqid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASMARM_MSGBUF_H */ diff --git a/arch/arm/include/asm/mutex.h b/arch/arm/include/asm/mutex.h index b1479fd04a951f1d82d55f77fd01cb9f0b072f38..87c044910fe0a2274cc7198cdcbe00ca76d05795 100644 --- a/arch/arm/include/asm/mutex.h +++ b/arch/arm/include/asm/mutex.h @@ -9,8 +9,13 @@ #define _ASM_MUTEX_H /* * On pre-ARMv6 hardware this results in a swp-based implementation, - * which is the most efficient. For ARMv6+, we emit a pair of exclusive - * accesses instead. + * which is the most efficient. For ARMv6+, we have exclusive memory + * accessors and use atomic_dec to avoid the extra xchg operations + * on the locking slowpaths. */ +#if __LINUX_ARM_ARCH__ < 6 #include +#else +#include #endif +#endif /* _ASM_MUTEX_H */ diff --git a/arch/arm/mach-mxs/include/mach/entry-macro.S b/arch/arm/include/asm/opcodes-virt.h similarity index 59% rename from arch/arm/mach-mxs/include/mach/entry-macro.S rename to arch/arm/include/asm/opcodes-virt.h index 0c14259705b9c95af2aef87524004d0f0e5a1b4c..b85665a96f8e329e2dc2494da1afb831f80f07e4 100644 --- a/arch/arm/mach-mxs/include/mach/entry-macro.S +++ b/arch/arm/include/asm/opcodes-virt.h @@ -1,7 +1,6 @@ /* - * Low-level IRQ helper macros for Freescale MXS-based - * - * Copyright (C) 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. + * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions + * Copyright (C) 2012 Linaro Limited * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -17,19 +16,14 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ +#ifndef __ASM_ARM_OPCODES_VIRT_H +#define __ASM_ARM_OPCODES_VIRT_H -#include - -#define MXS_ICOLL_VBASE MXS_IO_ADDRESS(MXS_ICOLL_BASE_ADDR) -#define HW_ICOLL_STAT_OFFSET 0x70 +#include - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base, #HW_ICOLL_STAT_OFFSET] - cmp \irqnr, #0x7F - strne \irqnr, [\base] - moveqs \irqnr, #0 - .endm +#define __HVC(imm16) __inst_arm_thumb32( \ + 0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) & 0x000F), \ + 0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF) \ +) - .macro get_irqnr_preamble, base, tmp - ldr \base, =MXS_ICOLL_VBASE - .endm +#endif /* ! __ASM_ARM_OPCODES_VIRT_H */ diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h index 19c48deda70f1b759b94b3a852dc0b4f207adfd8..74e211a6fb2442b1e35750065923a148e63e37e3 100644 --- a/arch/arm/include/asm/opcodes.h +++ b/arch/arm/include/asm/opcodes.h @@ -18,6 +18,33 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); #define ARM_OPCODE_CONDTEST_UNCOND 2 +/* + * Assembler opcode byteswap helpers. + * These are only intended for use by this header: don't use them directly, + * because they will be suboptimal in most cases. + */ +#define ___asm_opcode_swab32(x) ( \ + (((x) << 24) & 0xFF000000) \ + | (((x) << 8) & 0x00FF0000) \ + | (((x) >> 8) & 0x0000FF00) \ + | (((x) >> 24) & 0x000000FF) \ +) +#define ___asm_opcode_swab16(x) ( \ + (((x) << 8) & 0xFF00) \ + | (((x) >> 8) & 0x00FF) \ +) +#define ___asm_opcode_swahb32(x) ( \ + (((x) << 8) & 0xFF00FF00) \ + | (((x) >> 8) & 0x00FF00FF) \ +) +#define ___asm_opcode_swahw32(x) ( \ + (((x) << 16) & 0xFFFF0000) \ + | (((x) >> 16) & 0x0000FFFF) \ +) +#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF) +#define ___asm_opcode_identity16(x) ((x) & 0xFFFF) + + /* * Opcode byteswap helpers * @@ -41,39 +68,163 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not * represent any valid Thumb-2 instruction. For this range, * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false. + * + * The ___asm variants are intended only for use by this header, in situations + * involving inline assembler. For .S files, the normal __opcode_*() macros + * should do the right thing. */ +#ifdef __ASSEMBLY__ -#ifndef __ASSEMBLY__ +#define ___opcode_swab32(x) ___asm_opcode_swab32(x) +#define ___opcode_swab16(x) ___asm_opcode_swab16(x) +#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x) +#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x) +#define ___opcode_identity32(x) ___asm_opcode_identity32(x) +#define ___opcode_identity16(x) ___asm_opcode_identity16(x) + +#else /* ! __ASSEMBLY__ */ #include #include +#define ___opcode_swab32(x) swab32(x) +#define ___opcode_swab16(x) swab16(x) +#define ___opcode_swahb32(x) swahb32(x) +#define ___opcode_swahw32(x) swahw32(x) +#define ___opcode_identity32(x) ((u32)(x)) +#define ___opcode_identity16(x) ((u16)(x)) + +#endif /* ! __ASSEMBLY__ */ + + #ifdef CONFIG_CPU_ENDIAN_BE8 -#define __opcode_to_mem_arm(x) swab32(x) -#define __opcode_to_mem_thumb16(x) swab16(x) -#define __opcode_to_mem_thumb32(x) swahb32(x) -#else -#define __opcode_to_mem_arm(x) ((u32)(x)) -#define __opcode_to_mem_thumb16(x) ((u16)(x)) -#define __opcode_to_mem_thumb32(x) swahw32(x) + +#define __opcode_to_mem_arm(x) ___opcode_swab32(x) +#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x) +#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x) +#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x) +#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x) +#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x) + +#else /* ! CONFIG_CPU_ENDIAN_BE8 */ + +#define __opcode_to_mem_arm(x) ___opcode_identity32(x) +#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x) +#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x) +#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x) +#ifndef CONFIG_CPU_ENDIAN_BE32 +/* + * On BE32 systems, using 32-bit accesses to store Thumb instructions will not + * work in all cases, due to alignment constraints. For now, a correct + * version is not provided for BE32. + */ +#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x) +#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x) #endif +#endif /* ! CONFIG_CPU_ENDIAN_BE8 */ + #define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x) #define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x) +#ifndef CONFIG_CPU_ENDIAN_BE32 #define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x) +#endif /* Operations specific to Thumb opcodes */ /* Instruction size checks: */ -#define __opcode_is_thumb32(x) ((u32)(x) >= 0xE8000000UL) -#define __opcode_is_thumb16(x) ((u32)(x) < 0xE800UL) +#define __opcode_is_thumb32(x) ( \ + ((x) & 0xF8000000) == 0xE8000000 \ + || ((x) & 0xF0000000) == 0xF0000000 \ +) +#define __opcode_is_thumb16(x) ( \ + ((x) & 0xFFFF0000) == 0 \ + && !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) == 0xF000) \ +) /* Operations to construct or split 32-bit Thumb instructions: */ -#define __opcode_thumb32_first(x) ((u16)((x) >> 16)) -#define __opcode_thumb32_second(x) ((u16)(x)) -#define __opcode_thumb32_compose(first, second) \ - (((u32)(u16)(first) << 16) | (u32)(u16)(second)) +#define __opcode_thumb32_first(x) (___opcode_identity16((x) >> 16)) +#define __opcode_thumb32_second(x) (___opcode_identity16(x)) +#define __opcode_thumb32_compose(first, second) ( \ + (___opcode_identity32(___opcode_identity16(first)) << 16) \ + | ___opcode_identity32(___opcode_identity16(second)) \ +) +#define ___asm_opcode_thumb32_first(x) (___asm_opcode_identity16((x) >> 16)) +#define ___asm_opcode_thumb32_second(x) (___asm_opcode_identity16(x)) +#define ___asm_opcode_thumb32_compose(first, second) ( \ + (___asm_opcode_identity32(___asm_opcode_identity16(first)) << 16) \ + | ___asm_opcode_identity32(___asm_opcode_identity16(second)) \ +) -#endif /* __ASSEMBLY__ */ +/* + * Opcode injection helpers + * + * In rare cases it is necessary to assemble an opcode which the + * assembler does not support directly, or which would normally be + * rejected because of the CFLAGS or AFLAGS used to build the affected + * file. + * + * Before using these macros, consider carefully whether it is feasible + * instead to change the build flags for your file, or whether it really + * makes sense to support old assembler versions when building that + * particular kernel feature. + * + * The macros defined here should only be used where there is no viable + * alternative. + * + * + * __inst_arm(x): emit the specified ARM opcode + * __inst_thumb16(x): emit the specified 16-bit Thumb opcode + * __inst_thumb32(x): emit the specified 32-bit Thumb opcode + * + * __inst_arm_thumb16(arm, thumb): emit either the specified arm or + * 16-bit Thumb opcode, depending on whether an ARM or Thumb-2 + * kernel is being built + * + * __inst_arm_thumb32(arm, thumb): emit either the specified arm or + * 32-bit Thumb opcode, depending on whether an ARM or Thumb-2 + * kernel is being built + * + * + * Note that using these macros directly is poor practice. Instead, you + * should use them to define human-readable wrapper macros to encode the + * instructions that you care about. In code which might run on ARMv7 or + * above, you can usually use the __inst_arm_thumb{16,32} macros to + * specify the ARM and Thumb alternatives at the same time. This ensures + * that the correct opcode gets emitted depending on the instruction set + * used for the kernel build. + * + * Look at opcodes-virt.h for an example of how to use these macros. + */ +#include + +#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x)) +#define __inst_thumb32(x) ___inst_thumb32( \ + ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(x)), \ + ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second(x)) \ +) +#define __inst_thumb16(x) ___inst_thumb16(___asm_opcode_to_mem_thumb16(x)) + +#ifdef CONFIG_THUMB2_KERNEL +#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \ + __inst_thumb16(thumb_opcode) +#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \ + __inst_thumb32(thumb_opcode) +#else +#define __inst_arm_thumb16(arm_opcode, thumb_opcode) __inst_arm(arm_opcode) +#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode) +#endif + +/* Helpers for the helpers. Don't use these directly. */ +#ifdef __ASSEMBLY__ +#define ___inst_arm(x) .long x +#define ___inst_thumb16(x) .short x +#define ___inst_thumb32(first, second) .short first, second +#else +#define ___inst_arm(x) ".long " __stringify(x) "\n\t" +#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t" +#define ___inst_thumb32(first, second) \ + ".short " __stringify(first) ", " __stringify(second) "\n\t" +#endif #endif /* __ASM_ARM_OPCODES_H */ diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index ecf901902e448719120c921413ada640baa5794e..812a4944e78343469a2216327a746f37ce01b98c 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -19,7 +19,7 @@ #ifndef CONFIG_MMU -#include "page-nommu.h" +#include #else diff --git a/arch/arm/include/asm/param.h b/arch/arm/include/asm/param.h deleted file mode 100644 index 8b24bf94c06baac0e054c88c402e1ac01eed4bb1..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/param.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/include/asm/param.h - * - * Copyright (C) 1995-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_PARAM_H -#define __ASM_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* User interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#else -# define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -/* max length of hostname */ -#define MAXHOSTNAMELEN 64 - -#endif - diff --git a/arch/arm/include/asm/parport.h b/arch/arm/include/asm/parport.h deleted file mode 100644 index 26e94b09035a77bcdaf49405b9e83607b7af8704..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/parport.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/include/asm/parport.h: ARM-specific parport initialisation - * - * Copyright (C) 1999, 2000 Tim Waugh - * - * This file should only be included by drivers/parport/parport_pc.c. - */ - -#ifndef __ASMARM_PARPORT_H -#define __ASMARM_PARPORT_H - -static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); -static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) -{ - return parport_pc_find_isa_ports (autoirq, autodma); -} - -#endif /* !(_ASMARM_PARPORT_H) */ diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index e074948d81431cec24598e088a696202d52f1615..625cd621a436db1d24d1d9ee53dffe0fe0ff70d8 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -12,6 +12,13 @@ #ifndef __ARM_PERF_EVENT_H__ #define __ARM_PERF_EVENT_H__ -/* Nothing to see here... */ +/* + * The ARMv7 CPU PMU supports up to 32 event counters. + */ +#define ARMPMU_MAX_HWEVENTS 32 + +#define HW_OP_UNSUPPORTED 0xFFFF +#define C(_x) PERF_COUNT_HW_CACHE_##_x +#define CACHE_OP_UNSUPPORTED 0xFFFF #endif /* __ARM_PERF_EVENT_H__ */ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index f66626d71e7d1a304ad2c750fc4b00be9a436901..08c12312a1f9c97ca2cf4e5480197d68c657cdd0 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -16,7 +16,7 @@ #ifndef CONFIG_MMU #include -#include "pgtable-nommu.h" +#include #else @@ -195,6 +195,18 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) +#define pte_none(pte) (!pte_val(pte)) +#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) +#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) +#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) +#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) +#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) +#define pte_special(pte) (0) + +#define pte_present_user(pte) \ + ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ + (L_PTE_PRESENT | L_PTE_USER)) + #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) { @@ -206,25 +218,15 @@ extern void __sync_icache_dcache(pte_t pteval); static inline void set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval) { - if (addr >= TASK_SIZE) - set_pte_ext(ptep, pteval, 0); - else { + unsigned long ext = 0; + + if (addr < TASK_SIZE && pte_present_user(pteval)) { __sync_icache_dcache(pteval); - set_pte_ext(ptep, pteval, PTE_EXT_NG); + ext |= PTE_EXT_NG; } -} -#define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) -#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) -#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) -#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) -#define pte_special(pte) (0) - -#define pte_present_user(pte) \ - ((pte_val(pte) & (L_PTE_PRESENT | L_PTE_USER)) == \ - (L_PTE_PRESENT | L_PTE_USER)) + set_pte_ext(ptep, pteval, ext); +} #define PTE_BIT_FUNC(fn,op) \ static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } @@ -251,13 +253,13 @@ static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) * * 3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1 * 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 - * <--------------- offset --------------------> <- type --> 0 0 0 + * <--------------- offset ----------------------> < type -> 0 0 0 * - * This gives us up to 63 swap files and 32GB per swap file. Note that + * This gives us up to 31 swap files and 64GB per swap file. Note that * the offset field is always non-zero. */ #define __SWP_TYPE_SHIFT 3 -#define __SWP_TYPE_BITS 6 +#define __SWP_TYPE_BITS 5 #define __SWP_TYPE_MASK ((1 << __SWP_TYPE_BITS) - 1) #define __SWP_OFFSET_SHIFT (__SWP_TYPE_BITS + __SWP_TYPE_SHIFT) diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index 4432305f4a2aa1b2e89bf69beaf032929816f78d..a26170dce02e4b735ddab00a5ead32883e07b1b2 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -15,15 +15,6 @@ #include #include -/* - * Types of PMUs that can be accessed directly and require mutual - * exclusion between profiling tools. - */ -enum arm_pmu_type { - ARM_PMU_DEVICE_CPU = 0, - ARM_NUM_PMU_DEVICES, -}; - /* * struct arm_pmu_platdata - ARM PMU platform data * @@ -31,54 +22,24 @@ enum arm_pmu_type { * interrupt and passed the address of the low level handler, * and can be used to implement any platform specific handling * before or after calling it. - * @enable_irq: an optional handler which will be called after - * request_irq and be used to handle some platform specific - * irq enablement - * @disable_irq: an optional handler which will be called before - * free_irq and be used to handle some platform specific - * irq disablement + * @runtime_resume: an optional handler which will be called by the + * runtime PM framework following a call to pm_runtime_get(). + * Note that if pm_runtime_get() is called more than once in + * succession this handler will only be called once. + * @runtime_suspend: an optional handler which will be called by the + * runtime PM framework following a call to pm_runtime_put(). + * Note that if pm_runtime_get() is called more than once in + * succession this handler will only be called following the + * final call to pm_runtime_put() that actually disables the + * hardware. */ struct arm_pmu_platdata { irqreturn_t (*handle_irq)(int irq, void *dev, irq_handler_t pmu_handler); - void (*enable_irq)(int irq); - void (*disable_irq)(int irq); + int (*runtime_resume)(struct device *dev); + int (*runtime_suspend)(struct device *dev); }; -#ifdef CONFIG_CPU_HAS_PMU - -/** - * reserve_pmu() - reserve the hardware performance counters - * - * Reserve the hardware performance counters in the system for exclusive use. - * Returns 0 on success or -EBUSY if the lock is already held. - */ -extern int -reserve_pmu(enum arm_pmu_type type); - -/** - * release_pmu() - Relinquish control of the performance counters - * - * Release the performance counters and allow someone else to use them. - */ -extern void -release_pmu(enum arm_pmu_type type); - -#else /* CONFIG_CPU_HAS_PMU */ - -#include - -static inline int -reserve_pmu(enum arm_pmu_type type) -{ - return -ENODEV; -} - -static inline void -release_pmu(enum arm_pmu_type type) { } - -#endif /* CONFIG_CPU_HAS_PMU */ - #ifdef CONFIG_HW_PERF_EVENTS /* The events for a given PMU register set. */ @@ -103,7 +64,6 @@ struct pmu_hw_events { struct arm_pmu { struct pmu pmu; - enum arm_pmu_type type; cpumask_t active_irqs; char *name; irqreturn_t (*handle_irq)(int irq_num, void *dev); @@ -118,6 +78,8 @@ struct arm_pmu { void (*start)(void); void (*stop)(void); void (*reset)(void *); + int (*request_irq)(irq_handler_t handler); + void (*free_irq)(void); int (*map_event)(struct perf_event *event); int num_events; atomic_t active_events; @@ -129,7 +91,9 @@ struct arm_pmu { #define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu)) -int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type); +extern const struct dev_pm_ops armpmu_dev_pm_ops; + +int armpmu_register(struct arm_pmu *armpmu, char *name, int type); u64 armpmu_event_update(struct perf_event *event, struct hw_perf_event *hwc, @@ -139,6 +103,13 @@ int armpmu_event_set_period(struct perf_event *event, struct hw_perf_event *hwc, int idx); +int armpmu_map_event(struct perf_event *event, + const unsigned (*event_map)[PERF_COUNT_HW_MAX], + const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX], + u32 raw_event_mask); + #endif /* CONFIG_HW_PERF_EVENTS */ #endif /* __ARM_PMU_H__ */ diff --git a/arch/arm/include/asm/sched_clock.h b/arch/arm/include/asm/sched_clock.h index e3f7572634381bd28fbf3225eb375788431ee3fc..05b8e82ec9f5b66744305de1094df1115fc92798 100644 --- a/arch/arm/include/asm/sched_clock.h +++ b/arch/arm/include/asm/sched_clock.h @@ -10,5 +10,7 @@ extern void sched_clock_postinit(void); extern void setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate); +extern void setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate); #endif diff --git a/arch/arm/include/asm/segment.h b/arch/arm/include/asm/segment.h deleted file mode 100644 index 9e24c21f630491f01fa9106d53d14dc72808e1e0..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/segment.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_ARM_SEGMENT_H -#define __ASM_ARM_SEGMENT_H - -#define __KERNEL_CS 0x0 -#define __KERNEL_DS 0x0 - -#define __USER_CS 0x1 -#define __USER_DS 0x1 - -#endif /* __ASM_ARM_SEGMENT_H */ - diff --git a/arch/arm/include/asm/sembuf.h b/arch/arm/include/asm/sembuf.h deleted file mode 100644 index 1c0283954289f8f5327787245bfbaa8aa8901710..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASMARM_SEMBUF_H -#define _ASMARM_SEMBUF_H - -/* - * The semid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASMARM_SEMBUF_H */ diff --git a/arch/arm/include/asm/serial.h b/arch/arm/include/asm/serial.h deleted file mode 100644 index ebb049091e26033502dec932ab9015486c713894..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/serial.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/include/asm/serial.h - * - * Copyright (C) 1996 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 15-10-1996 RMK Created - */ - -#ifndef __ASM_SERIAL_H -#define __ASM_SERIAL_H - -#define BASE_BAUD (1843200 / 16) - -#endif diff --git a/arch/arm/include/asm/shmbuf.h b/arch/arm/include/asm/shmbuf.h deleted file mode 100644 index 2e5c67ba1c97ba129324260b3ca40330b275c819..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASMARM_SHMBUF_H -#define _ASMARM_SHMBUF_H - -/* - * The shmid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASMARM_SHMBUF_H */ diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index ae29293270a3d8c298f5359c17ff64443882729d..2e3be16c676687bec85e10f62f159f5a61c69194 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -60,15 +60,6 @@ extern int boot_secondary(unsigned int cpu, struct task_struct *); */ asmlinkage void secondary_start_kernel(void); -/* - * Perform platform specific initialisation of the specified CPU. - */ -extern void platform_secondary_init(unsigned int cpu); - -/* - * Initialize cpu_possible map, and enable coherency - */ -extern void platform_smp_prepare_cpus(unsigned int); /* * Initial data for bringing up a secondary CPU. @@ -79,18 +70,47 @@ struct secondary_data { void *stack; }; extern struct secondary_data secondary_data; +extern volatile int pen_release; extern int __cpu_disable(void); -extern int platform_cpu_disable(unsigned int cpu); extern void __cpu_die(unsigned int cpu); extern void cpu_die(void); -extern void platform_cpu_die(unsigned int cpu); -extern int platform_cpu_kill(unsigned int cpu); -extern void platform_cpu_enable(unsigned int cpu); - extern void arch_send_call_function_single_ipi(int cpu); extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); +struct smp_operations { +#ifdef CONFIG_SMP + /* + * Setup the set of possible CPUs (via set_cpu_possible) + */ + void (*smp_init_cpus)(void); + /* + * Initialize cpu_possible map, and enable coherency + */ + void (*smp_prepare_cpus)(unsigned int max_cpus); + + /* + * Perform platform specific initialisation of the specified CPU. + */ + void (*smp_secondary_init)(unsigned int cpu); + /* + * Boot a secondary CPU, and assign it the specified idle task. + * This also gives us the initial stack to use for this CPU. + */ + int (*smp_boot_secondary)(unsigned int cpu, struct task_struct *idle); +#ifdef CONFIG_HOTPLUG_CPU + int (*cpu_kill)(unsigned int cpu); + void (*cpu_die)(unsigned int cpu); + int (*cpu_disable)(unsigned int cpu); +#endif +#endif +}; + +/* + * set platform specific SMP operations + */ +extern void smp_set_ops(struct smp_operations *); + #endif /* ifndef __ASM_ARM_SMP_H */ diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h deleted file mode 100644 index 6433cadb6ed411ee0ca809d06b2d82e53731e1a7..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/socket.h +++ /dev/null @@ -1,72 +0,0 @@ -#ifndef _ASMARM_SOCKET_H -#define _ASMARM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#define SO_PROTOCOL 38 -#define SO_DOMAIN 39 - -#define SO_RXQ_OVFL 40 - -#define SO_WIFI_STATUS 41 -#define SCM_WIFI_STATUS SO_WIFI_STATUS -#define SO_PEEK_OFF 42 - -/* Instruct lower device to use last 4-bytes of skb data as FCS */ -#define SO_NOFCS 43 - -#endif /* _ASM_SOCKET_H */ diff --git a/arch/arm/include/asm/sockios.h b/arch/arm/include/asm/sockios.h deleted file mode 100644 index a2588a2512dfc76aee67f9b9e27b0b07cf4525f9..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ARCH_ARM_SOCKIOS_H -#define __ARCH_ARM_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif diff --git a/arch/arm/include/asm/sync_bitops.h b/arch/arm/include/asm/sync_bitops.h new file mode 100644 index 0000000000000000000000000000000000000000..63479eecbf769e122169e813f8e948e7e5126a90 --- /dev/null +++ b/arch/arm/include/asm/sync_bitops.h @@ -0,0 +1,27 @@ +#ifndef __ASM_SYNC_BITOPS_H__ +#define __ASM_SYNC_BITOPS_H__ + +#include +#include + +/* sync_bitops functions are equivalent to the SMP implementation of the + * original functions, independently from CONFIG_SMP being defined. + * + * We need them because _set_bit etc are not SMP safe if !CONFIG_SMP. But + * under Xen you might be communicating with a completely external entity + * who might be on another CPU (e.g. two uniprocessor guests communicating + * via event channels and grant tables). So we need a variant of the bit + * ops which are SMP safe even on a UP kernel. + */ + +#define sync_set_bit(nr, p) _set_bit(nr, p) +#define sync_clear_bit(nr, p) _clear_bit(nr, p) +#define sync_change_bit(nr, p) _change_bit(nr, p) +#define sync_test_and_set_bit(nr, p) _test_and_set_bit(nr, p) +#define sync_test_and_clear_bit(nr, p) _test_and_clear_bit(nr, p) +#define sync_test_and_change_bit(nr, p) _test_and_change_bit(nr, p) +#define sync_test_bit(nr, addr) test_bit(nr, addr) +#define sync_cmpxchg cmpxchg + + +#endif diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h index c334a23ddf75917b659c15eb0d854c94bf41f977..9fdded6b108971412c3f92a13be48724313b3512 100644 --- a/arch/arm/include/asm/syscall.h +++ b/arch/arm/include/asm/syscall.h @@ -8,6 +8,11 @@ #define _ASM_ARM_SYSCALL_H #include +#include + +#include + +#define NR_syscalls (__NR_syscalls) extern const unsigned long sys_call_table[]; diff --git a/arch/arm/include/asm/termbits.h b/arch/arm/include/asm/termbits.h deleted file mode 100644 index 704135d28d1d3a90d7d5bf32a0744bdf0c3383d9..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/termbits.h +++ /dev/null @@ -1,198 +0,0 @@ -#ifndef __ASM_ARM_TERMBITS_H -#define __ASM_ARM_TERMBITS_H - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ASM_ARM_TERMBITS_H */ diff --git a/arch/arm/include/asm/termios.h b/arch/arm/include/asm/termios.h deleted file mode 100644 index 293e3f1bc3f22c3c41e0ffd62d77ce9f9c66da70..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/termios.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef __ASM_ARM_TERMIOS_H -#define __ASM_ARM_TERMIOS_H - -#include -#include - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* __ASM_ARM_TERMIOS_H */ diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index af7b0bda3355d9af850ae722b2b1f55277ef6e67..f71cdab18b87589beb5d4df33bcae80483e71536 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -59,7 +59,9 @@ struct thread_info { __u32 syscall; /* syscall number */ __u8 used_cp[16]; /* thread used copro */ unsigned long tp_value; +#ifdef CONFIG_CRUNCH struct crunch_state crunchstate; +#endif union fp_state fpstate __attribute__((aligned(8))); union vfp_state vfpstate; #ifdef CONFIG_ARM_THUMBEE @@ -148,6 +150,7 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_SYSCALL_TRACE 8 #define TIF_SYSCALL_AUDIT 9 +#define TIF_SYSCALL_TRACEPOINT 10 #define TIF_POLLING_NRFLAG 16 #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ @@ -160,12 +163,13 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) /* Checks for any syscall work in entry-common.S */ -#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT) +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT) /* * Change these and you break ASM code in entry-common.S diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h index ce119442277c4cbcc895a3c10fce03133925853d..83f2aa83899c4b14cede7dd798178655884c951f 100644 --- a/arch/arm/include/asm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -12,15 +12,13 @@ #ifndef _ASMARM_TIMEX_H #define _ASMARM_TIMEX_H -#include +#ifdef CONFIG_ARCH_MULTIPLATFORM +#define CLOCK_TICK_RATE 1000000 +#else #include +#endif typedef unsigned long cycles_t; - -#ifdef ARCH_HAS_READ_CURRENT_TIMER #define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; }) -#else -#define get_cycles() (0) -#endif #endif diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 314d4664eae7d9976a5fe656f74918cb8d15ab8b..99a19512ee26e2e5d99135d21f10d8b99e606226 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -199,6 +199,9 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, { pgtable_page_dtor(pte); +#ifdef CONFIG_ARM_LPAE + tlb_add_flush(tlb, addr); +#else /* * With the classic ARM MMU, a pte page has two corresponding pmd * entries, each covering 1MB. @@ -206,6 +209,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, addr &= PMD_MASK; tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE); tlb_add_flush(tlb, addr + SZ_1M); +#endif tlb_remove_page(tlb, pte); } diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h deleted file mode 100644 index 28beab917ffc7741f967c53a1803d662fa648cac..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/types.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_ARM_TYPES_H -#define __ASM_ARM_TYPES_H - -#include - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#endif /* __KERNEL__ */ - -#endif - diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 479a6352e0b5075911e91a4e0b60b7e9443fd4fd..77bd79f2ffdbd0344d096ca7fb2db809fb52d387 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -101,28 +101,39 @@ extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); -#define __get_user_x(__r2,__p,__e,__s,__i...) \ +#define __GUP_CLOBBER_1 "lr", "cc" +#ifdef CONFIG_CPU_USE_DOMAINS +#define __GUP_CLOBBER_2 "ip", "lr", "cc" +#else +#define __GUP_CLOBBER_2 "lr", "cc" +#endif +#define __GUP_CLOBBER_4 "lr", "cc" + +#define __get_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%1", "r2") \ + __asmeq("%3", "r1") \ "bl __get_user_" #__s \ : "=&r" (__e), "=r" (__r2) \ - : "0" (__p) \ - : __i, "cc") + : "0" (__p), "r" (__l) \ + : __GUP_CLOBBER_##__s) -#define get_user(x,p) \ +#define __get_user_check(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ register unsigned long __r2 asm("r2"); \ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __get_user_x(__r2, __p, __e, 1, "lr"); \ - break; \ + __get_user_x(__r2, __p, __e, __l, 1); \ + break; \ case 2: \ - __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \ + __get_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __get_user_x(__r2, __p, __e, 4, "lr"); \ + __get_user_x(__r2, __p, __e, __l, 4); \ break; \ default: __e = __get_user_bad(); break; \ } \ @@ -130,42 +141,57 @@ extern int __get_user_4(void *); __e; \ }) +#define get_user(x,p) \ + ({ \ + might_fault(); \ + __get_user_check(x,p); \ + }) + extern int __put_user_1(void *, unsigned int); extern int __put_user_2(void *, unsigned int); extern int __put_user_4(void *, unsigned int); extern int __put_user_8(void *, unsigned long long); -#define __put_user_x(__r2,__p,__e,__s) \ +#define __put_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%2", "r2") \ + __asmeq("%3", "r1") \ "bl __put_user_" #__s \ : "=&r" (__e) \ - : "0" (__p), "r" (__r2) \ + : "0" (__p), "r" (__r2), "r" (__l) \ : "ip", "lr", "cc") -#define put_user(x,p) \ +#define __put_user_check(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __r2 asm("r2") = (x); \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __put_user_x(__r2, __p, __e, 1); \ + __put_user_x(__r2, __p, __e, __l, 1); \ break; \ case 2: \ - __put_user_x(__r2, __p, __e, 2); \ + __put_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __put_user_x(__r2, __p, __e, 4); \ + __put_user_x(__r2, __p, __e, __l, 4); \ break; \ case 8: \ - __put_user_x(__r2, __p, __e, 8); \ + __put_user_x(__r2, __p, __e, __l, 8); \ break; \ default: __e = __put_user_bad(); break; \ } \ __e; \ }) +#define put_user(x,p) \ + ({ \ + might_fault(); \ + __put_user_check(x,p); \ + }) + #else /* CONFIG_MMU */ /* @@ -219,6 +245,7 @@ do { \ unsigned long __gu_addr = (unsigned long)(ptr); \ unsigned long __gu_val; \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ @@ -300,6 +327,7 @@ do { \ unsigned long __pu_addr = (unsigned long)(ptr); \ __typeof__(*(ptr)) __pu_val = (x); \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h deleted file mode 100644 index 44593a8949038d18f566a821b6c0d99161de43a5..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/unaligned.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_ARM_UNALIGNED_H -#define _ASM_ARM_UNALIGNED_H - -#include -#include -#include - -/* - * Select endianness - */ -#ifndef __ARMEB__ -#define get_unaligned __get_unaligned_le -#define put_unaligned __put_unaligned_le -#else -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be -#endif - -#endif /* _ASM_ARM_UNALIGNED_H */ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 0cab47d4a83ff97a23c7a9d2975cfb855a687e3e..d9ff5cc3a5060177be581772cf22ead601ad4f65 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -404,6 +404,15 @@ #define __NR_setns (__NR_SYSCALL_BASE+375) #define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) #define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) + /* 378 for kcmp */ + +/* + * This may need to be greater than __NR_last_syscall+1 in order to + * account for the padding in the syscall table + */ +#ifdef __KERNEL__ +#define __NR_syscalls (380) +#endif /* __KERNEL__ */ /* * The following SWIs are ARM private. @@ -483,6 +492,7 @@ */ #define __IGNORE_fadvise64_64 #define __IGNORE_migrate_pages +#define __IGNORE_kcmp #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h index 3d5fc41ae8d38a7743b3bee9c55490135c19dcea..a7aadbd9a6dd2a1cbe18de85d6998c0ce0d8f53f 100644 --- a/arch/arm/include/asm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -5,7 +5,7 @@ */ #include -#include "vfp.h" +#include @ Macros to allow building with old toolkits (with no VFP support) .macro VFPFMRX, rd, sysreg, cond diff --git a/arch/arm/include/asm/xen/events.h b/arch/arm/include/asm/xen/events.h new file mode 100644 index 0000000000000000000000000000000000000000..94b4e9020b0227465953e3332624424cbc520653 --- /dev/null +++ b/arch/arm/include/asm/xen/events.h @@ -0,0 +1,18 @@ +#ifndef _ASM_ARM_XEN_EVENTS_H +#define _ASM_ARM_XEN_EVENTS_H + +#include + +enum ipi_vector { + XEN_PLACEHOLDER_VECTOR, + + /* Xen IPIs go here */ + XEN_NR_IPIS, +}; + +static inline int xen_irqs_disabled(struct pt_regs *regs) +{ + return raw_irqs_disabled_flags(regs->ARM_cpsr); +} + +#endif /* _ASM_ARM_XEN_EVENTS_H */ diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h new file mode 100644 index 0000000000000000000000000000000000000000..8a823253d775d83337bab6e833d30949e553e49d --- /dev/null +++ b/arch/arm/include/asm/xen/hypercall.h @@ -0,0 +1,69 @@ +/****************************************************************************** + * hypercall.h + * + * Linux-specific hypervisor handling. + * + * Stefano Stabellini , Citrix, 2012 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation; or, when distributed + * separately from the Linux kernel or incorporated into other + * software packages, subject to the following license: + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this source file (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, modify, + * merge, publish, distribute, sublicense, and/or sell copies of the Software, + * and to permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#ifndef _ASM_ARM_XEN_HYPERCALL_H +#define _ASM_ARM_XEN_HYPERCALL_H + +#include + +long privcmd_call(unsigned call, unsigned long a1, + unsigned long a2, unsigned long a3, + unsigned long a4, unsigned long a5); +int HYPERVISOR_xen_version(int cmd, void *arg); +int HYPERVISOR_console_io(int cmd, int count, char *str); +int HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count); +int HYPERVISOR_sched_op(int cmd, void *arg); +int HYPERVISOR_event_channel_op(int cmd, void *arg); +unsigned long HYPERVISOR_hvm_op(int op, void *arg); +int HYPERVISOR_memory_op(unsigned int cmd, void *arg); +int HYPERVISOR_physdev_op(int cmd, void *arg); + +static inline void +MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va, + unsigned int new_val, unsigned long flags) +{ + BUG(); +} + +static inline void +MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req, + int count, int *success_count, domid_t domid) +{ + BUG(); +} + +static inline int +HYPERVISOR_multicall(void *call_list, int nr_calls) +{ + BUG(); +} +#endif /* _ASM_ARM_XEN_HYPERCALL_H */ diff --git a/arch/arm/include/asm/xen/hypervisor.h b/arch/arm/include/asm/xen/hypervisor.h new file mode 100644 index 0000000000000000000000000000000000000000..d7ab99a0c9ebe2499b2c4defca40c0cb4a893358 --- /dev/null +++ b/arch/arm/include/asm/xen/hypervisor.h @@ -0,0 +1,19 @@ +#ifndef _ASM_ARM_XEN_HYPERVISOR_H +#define _ASM_ARM_XEN_HYPERVISOR_H + +extern struct shared_info *HYPERVISOR_shared_info; +extern struct start_info *xen_start_info; + +/* Lazy mode for batching updates / context switch */ +enum paravirt_lazy_mode { + PARAVIRT_LAZY_NONE, + PARAVIRT_LAZY_MMU, + PARAVIRT_LAZY_CPU, +}; + +static inline enum paravirt_lazy_mode paravirt_get_lazy_mode(void) +{ + return PARAVIRT_LAZY_NONE; +} + +#endif /* _ASM_ARM_XEN_HYPERVISOR_H */ diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h new file mode 100644 index 0000000000000000000000000000000000000000..ae05e56dd17d6eb2e270117172dbc327f27b82d2 --- /dev/null +++ b/arch/arm/include/asm/xen/interface.h @@ -0,0 +1,73 @@ +/****************************************************************************** + * Guest OS interface to ARM Xen. + * + * Stefano Stabellini , Citrix, 2012 + */ + +#ifndef _ASM_ARM_XEN_INTERFACE_H +#define _ASM_ARM_XEN_INTERFACE_H + +#include + +#define uint64_aligned_t uint64_t __attribute__((aligned(8))) + +#define __DEFINE_GUEST_HANDLE(name, type) \ + typedef struct { union { type *p; uint64_aligned_t q; }; } \ + __guest_handle_ ## name + +#define DEFINE_GUEST_HANDLE_STRUCT(name) \ + __DEFINE_GUEST_HANDLE(name, struct name) +#define DEFINE_GUEST_HANDLE(name) __DEFINE_GUEST_HANDLE(name, name) +#define GUEST_HANDLE(name) __guest_handle_ ## name + +#define set_xen_guest_handle(hnd, val) \ + do { \ + if (sizeof(hnd) == 8) \ + *(uint64_t *)&(hnd) = 0; \ + (hnd).p = val; \ + } while (0) + +#ifndef __ASSEMBLY__ +/* Explicitly size integers that represent pfns in the interface with + * Xen so that we can have one ABI that works for 32 and 64 bit guests. */ +typedef uint64_t xen_pfn_t; +typedef uint64_t xen_ulong_t; +/* Guest handles for primitive C types. */ +__DEFINE_GUEST_HANDLE(uchar, unsigned char); +__DEFINE_GUEST_HANDLE(uint, unsigned int); +__DEFINE_GUEST_HANDLE(ulong, unsigned long); +DEFINE_GUEST_HANDLE(char); +DEFINE_GUEST_HANDLE(int); +DEFINE_GUEST_HANDLE(long); +DEFINE_GUEST_HANDLE(void); +DEFINE_GUEST_HANDLE(uint64_t); +DEFINE_GUEST_HANDLE(uint32_t); +DEFINE_GUEST_HANDLE(xen_pfn_t); + +/* Maximum number of virtual CPUs in multi-processor guests. */ +#define MAX_VIRT_CPUS 1 + +struct arch_vcpu_info { }; +struct arch_shared_info { }; + +/* TODO: Move pvclock definitions some place arch independent */ +struct pvclock_vcpu_time_info { + u32 version; + u32 pad0; + u64 tsc_timestamp; + u64 system_time; + u32 tsc_to_system_mul; + s8 tsc_shift; + u8 flags; + u8 pad[2]; +} __attribute__((__packed__)); /* 32 bytes */ + +/* It is OK to have a 12 bytes struct with no padding because it is packed */ +struct pvclock_wall_clock { + u32 version; + u32 sec; + u32 nsec; +} __attribute__((__packed__)); +#endif + +#endif /* _ASM_ARM_XEN_INTERFACE_H */ diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h new file mode 100644 index 0000000000000000000000000000000000000000..174202318dfff2779ece119e7b45949b82f429e0 --- /dev/null +++ b/arch/arm/include/asm/xen/page.h @@ -0,0 +1,82 @@ +#ifndef _ASM_ARM_XEN_PAGE_H +#define _ASM_ARM_XEN_PAGE_H + +#include +#include + +#include +#include + +#include + +#define pfn_to_mfn(pfn) (pfn) +#define phys_to_machine_mapping_valid (1) +#define mfn_to_pfn(mfn) (mfn) +#define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT)) + +#define pte_mfn pte_pfn +#define mfn_pte pfn_pte + +/* Xen machine address */ +typedef struct xmaddr { + phys_addr_t maddr; +} xmaddr_t; + +/* Xen pseudo-physical address */ +typedef struct xpaddr { + phys_addr_t paddr; +} xpaddr_t; + +#define XMADDR(x) ((xmaddr_t) { .maddr = (x) }) +#define XPADDR(x) ((xpaddr_t) { .paddr = (x) }) + +static inline xmaddr_t phys_to_machine(xpaddr_t phys) +{ + unsigned offset = phys.paddr & ~PAGE_MASK; + return XMADDR(PFN_PHYS(pfn_to_mfn(PFN_DOWN(phys.paddr))) | offset); +} + +static inline xpaddr_t machine_to_phys(xmaddr_t machine) +{ + unsigned offset = machine.maddr & ~PAGE_MASK; + return XPADDR(PFN_PHYS(mfn_to_pfn(PFN_DOWN(machine.maddr))) | offset); +} +/* VIRT <-> MACHINE conversion */ +#define virt_to_machine(v) (phys_to_machine(XPADDR(__pa(v)))) +#define virt_to_pfn(v) (PFN_DOWN(__pa(v))) +#define virt_to_mfn(v) (pfn_to_mfn(virt_to_pfn(v))) +#define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT)) + +static inline xmaddr_t arbitrary_virt_to_machine(void *vaddr) +{ + /* TODO: assuming it is mapped in the kernel 1:1 */ + return virt_to_machine(vaddr); +} + +/* TODO: this shouldn't be here but it is because the frontend drivers + * are using it (its rolled in headers) even though we won't hit the code path. + * So for right now just punt with this. + */ +static inline pte_t *lookup_address(unsigned long address, unsigned int *level) +{ + BUG(); + return NULL; +} + +static inline int m2p_add_override(unsigned long mfn, struct page *page, + struct gnttab_map_grant_ref *kmap_op) +{ + return 0; +} + +static inline int m2p_remove_override(struct page *page, bool clear_pte) +{ + return 0; +} + +static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + BUG(); + return false; +} +#endif /* _ASM_ARM_XEN_PAGE_H */ diff --git a/arch/arm/mach-highbank/include/mach/debug-macro.S b/arch/arm/include/debug/highbank.S similarity index 83% rename from arch/arm/mach-highbank/include/mach/debug-macro.S rename to arch/arm/include/debug/highbank.S index cb57fe5bcd04118a4df466000ef132eadd2bd1f2..8cad4322a5a23d660a9465efafc31911d033b9f6 100644 --- a/arch/arm/mach-highbank/include/mach/debug-macro.S +++ b/arch/arm/include/debug/highbank.S @@ -10,10 +10,8 @@ */ .macro addruart,rp,rv,tmp - movw \rv, #0x6000 - movt \rv, #0xfee3 - movw \rp, #0x6000 - movt \rp, #0xfff3 + ldr \rv, =0xfee36000 + ldr \rp, =0xfff36000 .endm #include diff --git a/arch/arm/include/debug/icedcc.S b/arch/arm/include/debug/icedcc.S new file mode 100644 index 0000000000000000000000000000000000000000..43afcb021fa37be2b6aa490a72e4785d063b3bbf --- /dev/null +++ b/arch/arm/include/debug/icedcc.S @@ -0,0 +1,90 @@ +/* + * arch/arm/include/debug/icedcc.S + * + * Copyright (C) 1994-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + + @@ debug using ARM EmbeddedICE DCC channel + + .macro addruart, rp, rv, tmp + .endm + +#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) + + .macro senduart, rd, rx + mcr p14, 0, \rd, c0, c5, 0 + .endm + + .macro busyuart, rd, rx +1001: + mrc p14, 0, \rx, c0, c1, 0 + tst \rx, #0x20000000 + beq 1001b + .endm + + .macro waituart, rd, rx + mov \rd, #0x2000000 +1001: + subs \rd, \rd, #1 + bmi 1002f + mrc p14, 0, \rx, c0, c1, 0 + tst \rx, #0x20000000 + bne 1001b +1002: + .endm + +#elif defined(CONFIG_CPU_XSCALE) + + .macro senduart, rd, rx + mcr p14, 0, \rd, c8, c0, 0 + .endm + + .macro busyuart, rd, rx +1001: + mrc p14, 0, \rx, c14, c0, 0 + tst \rx, #0x10000000 + beq 1001b + .endm + + .macro waituart, rd, rx + mov \rd, #0x10000000 +1001: + subs \rd, \rd, #1 + bmi 1002f + mrc p14, 0, \rx, c14, c0, 0 + tst \rx, #0x10000000 + bne 1001b +1002: + .endm + +#else + + .macro senduart, rd, rx + mcr p14, 0, \rd, c1, c0, 0 + .endm + + .macro busyuart, rd, rx +1001: + mrc p14, 0, \rx, c0, c0, 0 + tst \rx, #2 + beq 1001b + + .endm + + .macro waituart, rd, rx + mov \rd, #0x2000000 +1001: + subs \rd, \rd, #1 + bmi 1002f + mrc p14, 0, \rx, c0, c0, 0 + tst \rx, #2 + bne 1001b +1002: + .endm + +#endif /* CONFIG_CPU_V6 */ diff --git a/arch/arm/mach-mvebu/include/mach/debug-macro.S b/arch/arm/include/debug/mvebu.S similarity index 86% rename from arch/arm/mach-mvebu/include/mach/debug-macro.S rename to arch/arm/include/debug/mvebu.S index 22825760c7e13f71decdc97bc35244811e85c470..865c6d02b332f891ff612cc25bf1208547c1df80 100644 --- a/arch/arm/mach-mvebu/include/mach/debug-macro.S +++ b/arch/arm/include/debug/mvebu.S @@ -11,7 +11,8 @@ * published by the Free Software Foundation. */ -#include +#define ARMADA_370_XP_REGS_PHYS_BASE 0xd0000000 +#define ARMADA_370_XP_REGS_VIRT_BASE 0xfeb00000 .macro addruart, rp, rv, tmp ldr \rp, =ARMADA_370_XP_REGS_PHYS_BASE diff --git a/arch/arm/mach-picoxcell/include/mach/debug-macro.S b/arch/arm/include/debug/picoxcell.S similarity index 89% rename from arch/arm/mach-picoxcell/include/mach/debug-macro.S rename to arch/arm/include/debug/picoxcell.S index 58d4ee3ae9499d062cd68e972596dbc6f0ffc521..7419deb1b948f1b8954a6579db72b951b30880bb 100644 --- a/arch/arm/mach-picoxcell/include/mach/debug-macro.S +++ b/arch/arm/include/debug/picoxcell.S @@ -9,10 +9,10 @@ * accesses to the 8250. */ #include -#include -#include #define UART_SHIFT 2 +#define PICOXCELL_UART1_BASE 0x80230000 +#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000) .macro addruart, rp, rv, tmp ldr \rv, =PHYS_TO_IO(PICOXCELL_UART1_BASE) diff --git a/arch/arm/mach-socfpga/include/mach/debug-macro.S b/arch/arm/include/debug/socfpga.S similarity index 100% rename from arch/arm/mach-socfpga/include/mach/debug-macro.S rename to arch/arm/include/debug/socfpga.S diff --git a/arch/arm/mach-vexpress/include/mach/debug-macro.S b/arch/arm/include/debug/vexpress.S similarity index 100% rename from arch/arm/mach-vexpress/include/mach/debug-macro.S rename to arch/arm/include/debug/vexpress.S diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild new file mode 100644 index 0000000000000000000000000000000000000000..baebb3da1d44160fc6f6f259886656e6f494b167 --- /dev/null +++ b/arch/arm/include/uapi/asm/Kbuild @@ -0,0 +1,3 @@ +# UAPI Header export list +include include/uapi/asm-generic/Kbuild.asm + diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index 7ad2d5cf700825892278c55920ded6f77e60558e..5dfef9d97ed92b960d8d359997a20108759d60c8 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -19,9 +19,10 @@ obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \ process.o ptrace.o return_address.o sched_clock.o \ setup.o signal.o stacktrace.o sys_arm.o time.o traps.o -obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o +obj-$(CONFIG_ATAGS) += atags_parse.o +obj-$(CONFIG_ATAGS_PROC) += atags_proc.o +obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o -obj-$(CONFIG_LEDS) += leds.o obj-$(CONFIG_OC_ETM) += etm.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_ISA_DMA_API) += dma.o @@ -52,7 +53,6 @@ test-kprobes-objs += kprobes-test-thumb.o else test-kprobes-objs += kprobes-test-arm.o endif -obj-$(CONFIG_ATAGS_PROC) += atags.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_KGDB) += kgdb.o @@ -69,8 +69,7 @@ obj-$(CONFIG_CPU_XSC3) += xscale-cp0.o obj-$(CONFIG_CPU_MOHAWK) += xscale-cp0.o obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o obj-$(CONFIG_IWMMXT) += iwmmxt.o -obj-$(CONFIG_CPU_HAS_PMU) += pmu.o -obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o +obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o perf_event_cpu.o AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c index cf258807160d6506cbfdb21df74758f75de04dfe..c8ef20747ee75a5b0426c8338b2bfb068e2d376e 100644 --- a/arch/arm/kernel/arch_timer.c +++ b/arch/arm/kernel/arch_timer.c @@ -21,18 +21,28 @@ #include #include +#include #include #include #include #include static unsigned long arch_timer_rate; -static int arch_timer_ppi; -static int arch_timer_ppi2; + +enum ppi_nr { + PHYS_SECURE_PPI, + PHYS_NONSECURE_PPI, + VIRT_PPI, + HYP_PPI, + MAX_TIMER_PPI +}; + +static int arch_timer_ppi[MAX_TIMER_PPI]; static struct clock_event_device __percpu **arch_timer_evt; +static struct delay_timer arch_delay_timer; -extern void init_current_timer_delay(unsigned long freq); +static bool arch_timer_use_virtual = true; /* * Architected system timer support. @@ -46,50 +56,104 @@ extern void init_current_timer_delay(unsigned long freq); #define ARCH_TIMER_REG_FREQ 1 #define ARCH_TIMER_REG_TVAL 2 -static void arch_timer_reg_write(int reg, u32 val) +#define ARCH_TIMER_PHYS_ACCESS 0 +#define ARCH_TIMER_VIRT_ACCESS 1 + +/* + * These register accessors are marked inline so the compiler can + * nicely work out which register we want, and chuck away the rest of + * the code. At least it does so with a recent GCC (4.6.3). + */ +static inline void arch_timer_reg_write(const int access, const int reg, u32 val) { - switch (reg) { - case ARCH_TIMER_REG_CTRL: - asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val)); - break; - case ARCH_TIMER_REG_TVAL: - asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val)); - break; + if (access == ARCH_TIMER_PHYS_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val)); + break; + } + } + + if (access == ARCH_TIMER_VIRT_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mcr p15, 0, %0, c14, c3, 1" : : "r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mcr p15, 0, %0, c14, c3, 0" : : "r" (val)); + break; + } } isb(); } -static u32 arch_timer_reg_read(int reg) +static inline u32 arch_timer_reg_read(const int access, const int reg) { - u32 val; + u32 val = 0; + + if (access == ARCH_TIMER_PHYS_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val)); + break; + case ARCH_TIMER_REG_FREQ: + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val)); + break; + } + } - switch (reg) { - case ARCH_TIMER_REG_CTRL: - asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val)); - break; - case ARCH_TIMER_REG_FREQ: - asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val)); - break; - case ARCH_TIMER_REG_TVAL: - asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val)); - break; - default: - BUG(); + if (access == ARCH_TIMER_VIRT_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mrc p15, 0, %0, c14, c3, 1" : "=r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mrc p15, 0, %0, c14, c3, 0" : "=r" (val)); + break; + } } return val; } -static irqreturn_t arch_timer_handler(int irq, void *dev_id) +static inline cycle_t arch_timer_counter_read(const int access) { - struct clock_event_device *evt = *(struct clock_event_device **)dev_id; - unsigned long ctrl; + cycle_t cval = 0; + + if (access == ARCH_TIMER_PHYS_ACCESS) + asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (cval)); + + if (access == ARCH_TIMER_VIRT_ACCESS) + asm volatile("mrrc p15, 1, %Q0, %R0, c14" : "=r" (cval)); + + return cval; +} + +static inline cycle_t arch_counter_get_cntpct(void) +{ + return arch_timer_counter_read(ARCH_TIMER_PHYS_ACCESS); +} - ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL); +static inline cycle_t arch_counter_get_cntvct(void) +{ + return arch_timer_counter_read(ARCH_TIMER_VIRT_ACCESS); +} + +static irqreturn_t inline timer_handler(const int access, + struct clock_event_device *evt) +{ + unsigned long ctrl; + ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL); if (ctrl & ARCH_TIMER_CTRL_IT_STAT) { ctrl |= ARCH_TIMER_CTRL_IT_MASK; - arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl); + arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl); evt->event_handler(evt); return IRQ_HANDLED; } @@ -97,63 +161,100 @@ static irqreturn_t arch_timer_handler(int irq, void *dev_id) return IRQ_NONE; } -static void arch_timer_disable(void) +static irqreturn_t arch_timer_handler_virt(int irq, void *dev_id) { - unsigned long ctrl; + struct clock_event_device *evt = *(struct clock_event_device **)dev_id; - ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL); - ctrl &= ~ARCH_TIMER_CTRL_ENABLE; - arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl); + return timer_handler(ARCH_TIMER_VIRT_ACCESS, evt); } -static void arch_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) +static irqreturn_t arch_timer_handler_phys(int irq, void *dev_id) { + struct clock_event_device *evt = *(struct clock_event_device **)dev_id; + + return timer_handler(ARCH_TIMER_PHYS_ACCESS, evt); +} + +static inline void timer_set_mode(const int access, int mode) +{ + unsigned long ctrl; switch (mode) { case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: - arch_timer_disable(); + ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL); + ctrl &= ~ARCH_TIMER_CTRL_ENABLE; + arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl); break; default: break; } } -static int arch_timer_set_next_event(unsigned long evt, - struct clock_event_device *unused) +static void arch_timer_set_mode_virt(enum clock_event_mode mode, + struct clock_event_device *clk) { - unsigned long ctrl; + timer_set_mode(ARCH_TIMER_VIRT_ACCESS, mode); +} - ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL); +static void arch_timer_set_mode_phys(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + timer_set_mode(ARCH_TIMER_PHYS_ACCESS, mode); +} + +static inline void set_next_event(const int access, unsigned long evt) +{ + unsigned long ctrl; + ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL); ctrl |= ARCH_TIMER_CTRL_ENABLE; ctrl &= ~ARCH_TIMER_CTRL_IT_MASK; + arch_timer_reg_write(access, ARCH_TIMER_REG_TVAL, evt); + arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl); +} - arch_timer_reg_write(ARCH_TIMER_REG_TVAL, evt); - arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl); +static int arch_timer_set_next_event_virt(unsigned long evt, + struct clock_event_device *unused) +{ + set_next_event(ARCH_TIMER_VIRT_ACCESS, evt); + return 0; +} +static int arch_timer_set_next_event_phys(unsigned long evt, + struct clock_event_device *unused) +{ + set_next_event(ARCH_TIMER_PHYS_ACCESS, evt); return 0; } static int __cpuinit arch_timer_setup(struct clock_event_device *clk) { - /* Be safe... */ - arch_timer_disable(); - clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP; clk->name = "arch_sys_timer"; clk->rating = 450; - clk->set_mode = arch_timer_set_mode; - clk->set_next_event = arch_timer_set_next_event; - clk->irq = arch_timer_ppi; + if (arch_timer_use_virtual) { + clk->irq = arch_timer_ppi[VIRT_PPI]; + clk->set_mode = arch_timer_set_mode_virt; + clk->set_next_event = arch_timer_set_next_event_virt; + } else { + clk->irq = arch_timer_ppi[PHYS_SECURE_PPI]; + clk->set_mode = arch_timer_set_mode_phys; + clk->set_next_event = arch_timer_set_next_event_phys; + } + + clk->set_mode(CLOCK_EVT_MODE_SHUTDOWN, NULL); clockevents_config_and_register(clk, arch_timer_rate, 0xf, 0x7fffffff); *__this_cpu_ptr(arch_timer_evt) = clk; - enable_percpu_irq(clk->irq, 0); - if (arch_timer_ppi2) - enable_percpu_irq(arch_timer_ppi2, 0); + if (arch_timer_use_virtual) + enable_percpu_irq(arch_timer_ppi[VIRT_PPI], 0); + else { + enable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], 0); + if (arch_timer_ppi[PHYS_NONSECURE_PPI]) + enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], 0); + } return 0; } @@ -173,8 +274,8 @@ static int arch_timer_available(void) return -ENXIO; if (arch_timer_rate == 0) { - arch_timer_reg_write(ARCH_TIMER_REG_CTRL, 0); - freq = arch_timer_reg_read(ARCH_TIMER_REG_FREQ); + freq = arch_timer_reg_read(ARCH_TIMER_PHYS_ACCESS, + ARCH_TIMER_REG_FREQ); /* Check the timer frequency. */ if (freq == 0) { @@ -185,52 +286,57 @@ static int arch_timer_available(void) arch_timer_rate = freq; } - pr_info_once("Architected local timer running at %lu.%02luMHz.\n", - arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100); + pr_info_once("Architected local timer running at %lu.%02luMHz (%s).\n", + arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100, + arch_timer_use_virtual ? "virt" : "phys"); return 0; } -static inline cycle_t arch_counter_get_cntpct(void) +static u32 notrace arch_counter_get_cntpct32(void) { - u32 cvall, cvalh; - - asm volatile("mrrc p15, 0, %0, %1, c14" : "=r" (cvall), "=r" (cvalh)); + cycle_t cnt = arch_counter_get_cntpct(); - return ((cycle_t) cvalh << 32) | cvall; -} - -static inline cycle_t arch_counter_get_cntvct(void) -{ - u32 cvall, cvalh; - - asm volatile("mrrc p15, 1, %0, %1, c14" : "=r" (cvall), "=r" (cvalh)); - - return ((cycle_t) cvalh << 32) | cvall; + /* + * The sched_clock infrastructure only knows about counters + * with at most 32bits. Forget about the upper 24 bits for the + * time being... + */ + return (u32)cnt; } static u32 notrace arch_counter_get_cntvct32(void) { - cycle_t cntvct = arch_counter_get_cntvct(); + cycle_t cnt = arch_counter_get_cntvct(); /* * The sched_clock infrastructure only knows about counters * with at most 32bits. Forget about the upper 24 bits for the * time being... */ - return (u32)(cntvct & (u32)~0); + return (u32)cnt; } static cycle_t arch_counter_read(struct clocksource *cs) { + /* + * Always use the physical counter for the clocksource. + * CNTHCTL.PL1PCTEN must be set to 1. + */ return arch_counter_get_cntpct(); } -int read_current_timer(unsigned long *timer_val) +static unsigned long arch_timer_read_current_timer(void) { - if (!arch_timer_rate) - return -ENXIO; - *timer_val = arch_counter_get_cntpct(); - return 0; + return arch_counter_get_cntpct(); +} + +static cycle_t arch_counter_read_cc(const struct cyclecounter *cc) +{ + /* + * Always use the physical counter for the clocksource. + * CNTHCTL.PL1PCTEN must be set to 1. + */ + return arch_counter_get_cntpct(); } static struct clocksource clocksource_counter = { @@ -241,14 +347,32 @@ static struct clocksource clocksource_counter = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static struct cyclecounter cyclecounter = { + .read = arch_counter_read_cc, + .mask = CLOCKSOURCE_MASK(56), +}; + +static struct timecounter timecounter; + +struct timecounter *arch_timer_get_timecounter(void) +{ + return &timecounter; +} + static void __cpuinit arch_timer_stop(struct clock_event_device *clk) { pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n", clk->irq, smp_processor_id()); - disable_percpu_irq(clk->irq); - if (arch_timer_ppi2) - disable_percpu_irq(arch_timer_ppi2); - arch_timer_set_mode(CLOCK_EVT_MODE_UNUSED, clk); + + if (arch_timer_use_virtual) + disable_percpu_irq(arch_timer_ppi[VIRT_PPI]); + else { + disable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI]); + if (arch_timer_ppi[PHYS_NONSECURE_PPI]) + disable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI]); + } + + clk->set_mode(CLOCK_EVT_MODE_UNUSED, clk); } static struct local_timer_ops arch_timer_ops __cpuinitdata = { @@ -261,36 +385,48 @@ static struct clock_event_device arch_timer_global_evt; static int __init arch_timer_register(void) { int err; + int ppi; err = arch_timer_available(); if (err) - return err; + goto out; arch_timer_evt = alloc_percpu(struct clock_event_device *); - if (!arch_timer_evt) - return -ENOMEM; + if (!arch_timer_evt) { + err = -ENOMEM; + goto out; + } clocksource_register_hz(&clocksource_counter, arch_timer_rate); + cyclecounter.mult = clocksource_counter.mult; + cyclecounter.shift = clocksource_counter.shift; + timecounter_init(&timecounter, &cyclecounter, + arch_counter_get_cntpct()); + + if (arch_timer_use_virtual) { + ppi = arch_timer_ppi[VIRT_PPI]; + err = request_percpu_irq(ppi, arch_timer_handler_virt, + "arch_timer", arch_timer_evt); + } else { + ppi = arch_timer_ppi[PHYS_SECURE_PPI]; + err = request_percpu_irq(ppi, arch_timer_handler_phys, + "arch_timer", arch_timer_evt); + if (!err && arch_timer_ppi[PHYS_NONSECURE_PPI]) { + ppi = arch_timer_ppi[PHYS_NONSECURE_PPI]; + err = request_percpu_irq(ppi, arch_timer_handler_phys, + "arch_timer", arch_timer_evt); + if (err) + free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], + arch_timer_evt); + } + } - err = request_percpu_irq(arch_timer_ppi, arch_timer_handler, - "arch_timer", arch_timer_evt); if (err) { pr_err("arch_timer: can't register interrupt %d (%d)\n", - arch_timer_ppi, err); + ppi, err); goto out_free; } - if (arch_timer_ppi2) { - err = request_percpu_irq(arch_timer_ppi2, arch_timer_handler, - "arch_timer", arch_timer_evt); - if (err) { - pr_err("arch_timer: can't register interrupt %d (%d)\n", - arch_timer_ppi2, err); - arch_timer_ppi2 = 0; - goto out_free_irq; - } - } - err = local_timer_register(&arch_timer_ops); if (err) { /* @@ -302,21 +438,29 @@ static int __init arch_timer_register(void) arch_timer_global_evt.cpumask = cpumask_of(0); err = arch_timer_setup(&arch_timer_global_evt); } - if (err) goto out_free_irq; - init_current_timer_delay(arch_timer_rate); + /* Use the architected timer for the delay loop. */ + arch_delay_timer.read_current_timer = &arch_timer_read_current_timer; + arch_delay_timer.freq = arch_timer_rate; + register_current_timer_delay(&arch_delay_timer); return 0; out_free_irq: - free_percpu_irq(arch_timer_ppi, arch_timer_evt); - if (arch_timer_ppi2) - free_percpu_irq(arch_timer_ppi2, arch_timer_evt); + if (arch_timer_use_virtual) + free_percpu_irq(arch_timer_ppi[VIRT_PPI], arch_timer_evt); + else { + free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], + arch_timer_evt); + if (arch_timer_ppi[PHYS_NONSECURE_PPI]) + free_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], + arch_timer_evt); + } out_free: free_percpu(arch_timer_evt); - +out: return err; } @@ -329,6 +473,7 @@ int __init arch_timer_of_register(void) { struct device_node *np; u32 freq; + int i; np = of_find_matching_node(NULL, arch_timer_of_match); if (!np) { @@ -340,22 +485,40 @@ int __init arch_timer_of_register(void) if (!of_property_read_u32(np, "clock-frequency", &freq)) arch_timer_rate = freq; - arch_timer_ppi = irq_of_parse_and_map(np, 0); - arch_timer_ppi2 = irq_of_parse_and_map(np, 1); - pr_info("arch_timer: found %s irqs %d %d\n", - np->name, arch_timer_ppi, arch_timer_ppi2); + for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) + arch_timer_ppi[i] = irq_of_parse_and_map(np, i); + + /* + * If no interrupt provided for virtual timer, we'll have to + * stick to the physical timer. It'd better be accessible... + */ + if (!arch_timer_ppi[VIRT_PPI]) { + arch_timer_use_virtual = false; + + if (!arch_timer_ppi[PHYS_SECURE_PPI] || + !arch_timer_ppi[PHYS_NONSECURE_PPI]) { + pr_warn("arch_timer: No interrupt available, giving up\n"); + return -EINVAL; + } + } return arch_timer_register(); } int __init arch_timer_sched_clock_init(void) { + u32 (*cnt32)(void); int err; err = arch_timer_available(); if (err) return err; - setup_sched_clock(arch_counter_get_cntvct32, 32, arch_timer_rate); + if (arch_timer_use_virtual) + cnt32 = arch_counter_get_cntvct32; + else + cnt32 = arch_counter_get_cntpct32; + + setup_sched_clock(cnt32, 32, arch_timer_rate); return 0; } diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 1429d8989fb90defcd8ba22fb18493a2206f658d..c985b481192c2643e938425a57e3e6fc9866ba90 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -59,10 +59,12 @@ int main(void) DEFINE(TI_USED_CP, offsetof(struct thread_info, used_cp)); DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value)); DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate)); +#ifdef CONFIG_VFP DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate)); #ifdef CONFIG_SMP DEFINE(VFP_CPU, offsetof(union vfp_state, hard.cpu)); #endif +#endif #ifdef CONFIG_ARM_THUMBEE DEFINE(TI_THUMBEE_STATE, offsetof(struct thread_info, thumbee_state)); #endif diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h index e5f028d214a11a2fbffd53161a98ebaf59d8740e..9edc9692332d1a368a293f38e0a9543c2102a751 100644 --- a/arch/arm/kernel/atags.h +++ b/arch/arm/kernel/atags.h @@ -3,3 +3,17 @@ extern void save_atags(struct tag *tags); #else static inline void save_atags(struct tag *tags) { } #endif + +void convert_to_tag_list(struct tag *tags); + +#ifdef CONFIG_ATAGS +struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr); +#else +static inline struct machine_desc * +setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr) +{ + early_print("no ATAGS support: can't continue\n"); + while (true); + unreachable(); +} +#endif diff --git a/arch/arm/kernel/compat.c b/arch/arm/kernel/atags_compat.c similarity index 99% rename from arch/arm/kernel/compat.c rename to arch/arm/kernel/atags_compat.c index 925652318b8b5df4cb7dce4383b99cee2640285b..5236ad38f417996e837ac45f4f9b4ae237c98c72 100644 --- a/arch/arm/kernel/compat.c +++ b/arch/arm/kernel/atags_compat.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/kernel/compat.c + * linux/arch/arm/kernel/atags_compat.c * * Copyright (C) 2001 Russell King * @@ -26,7 +26,7 @@ #include -#include "compat.h" +#include "atags.h" /* * Usage: diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c new file mode 100644 index 0000000000000000000000000000000000000000..14512e6931d87957b718445dd25b31283315a222 --- /dev/null +++ b/arch/arm/kernel/atags_parse.c @@ -0,0 +1,238 @@ +/* + * Tag parsing. + * + * Copyright (C) 1995-2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * This is the traditional way of passing data to the kernel at boot time. Rather + * than passing a fixed inflexible structure to the kernel, we pass a list + * of variable-sized tags to the kernel. The first tag must be a ATAG_CORE + * tag for the list to be recognised (to distinguish the tagged list from + * a param_struct). The list is terminated with a zero-length tag (this tag + * is not parsed in any way). + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "atags.h" + +static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; + +#ifndef MEM_SIZE +#define MEM_SIZE (16*1024*1024) +#endif + +static struct { + struct tag_header hdr1; + struct tag_core core; + struct tag_header hdr2; + struct tag_mem32 mem; + struct tag_header hdr3; +} default_tags __initdata = { + { tag_size(tag_core), ATAG_CORE }, + { 1, PAGE_SIZE, 0xff }, + { tag_size(tag_mem32), ATAG_MEM }, + { MEM_SIZE }, + { 0, ATAG_NONE } +}; + +static int __init parse_tag_core(const struct tag *tag) +{ + if (tag->hdr.size > 2) { + if ((tag->u.core.flags & 1) == 0) + root_mountflags &= ~MS_RDONLY; + ROOT_DEV = old_decode_dev(tag->u.core.rootdev); + } + return 0; +} + +__tagtable(ATAG_CORE, parse_tag_core); + +static int __init parse_tag_mem32(const struct tag *tag) +{ + return arm_add_memory(tag->u.mem.start, tag->u.mem.size); +} + +__tagtable(ATAG_MEM, parse_tag_mem32); + +#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) +static int __init parse_tag_videotext(const struct tag *tag) +{ + screen_info.orig_x = tag->u.videotext.x; + screen_info.orig_y = tag->u.videotext.y; + screen_info.orig_video_page = tag->u.videotext.video_page; + screen_info.orig_video_mode = tag->u.videotext.video_mode; + screen_info.orig_video_cols = tag->u.videotext.video_cols; + screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx; + screen_info.orig_video_lines = tag->u.videotext.video_lines; + screen_info.orig_video_isVGA = tag->u.videotext.video_isvga; + screen_info.orig_video_points = tag->u.videotext.video_points; + return 0; +} + +__tagtable(ATAG_VIDEOTEXT, parse_tag_videotext); +#endif + +#ifdef CONFIG_BLK_DEV_RAM +static int __init parse_tag_ramdisk(const struct tag *tag) +{ + extern int rd_size, rd_image_start, rd_prompt, rd_doload; + + rd_image_start = tag->u.ramdisk.start; + rd_doload = (tag->u.ramdisk.flags & 1) == 0; + rd_prompt = (tag->u.ramdisk.flags & 2) == 0; + + if (tag->u.ramdisk.size) + rd_size = tag->u.ramdisk.size; + + return 0; +} + +__tagtable(ATAG_RAMDISK, parse_tag_ramdisk); +#endif + +static int __init parse_tag_serialnr(const struct tag *tag) +{ + system_serial_low = tag->u.serialnr.low; + system_serial_high = tag->u.serialnr.high; + return 0; +} + +__tagtable(ATAG_SERIAL, parse_tag_serialnr); + +static int __init parse_tag_revision(const struct tag *tag) +{ + system_rev = tag->u.revision.rev; + return 0; +} + +__tagtable(ATAG_REVISION, parse_tag_revision); + +static int __init parse_tag_cmdline(const struct tag *tag) +{ +#if defined(CONFIG_CMDLINE_EXTEND) + strlcat(default_command_line, " ", COMMAND_LINE_SIZE); + strlcat(default_command_line, tag->u.cmdline.cmdline, + COMMAND_LINE_SIZE); +#elif defined(CONFIG_CMDLINE_FORCE) + pr_warning("Ignoring tag cmdline (using the default kernel command line)\n"); +#else + strlcpy(default_command_line, tag->u.cmdline.cmdline, + COMMAND_LINE_SIZE); +#endif + return 0; +} + +__tagtable(ATAG_CMDLINE, parse_tag_cmdline); + +/* + * Scan the tag table for this tag, and call its parse function. + * The tag table is built by the linker from all the __tagtable + * declarations. + */ +static int __init parse_tag(const struct tag *tag) +{ + extern struct tagtable __tagtable_begin, __tagtable_end; + struct tagtable *t; + + for (t = &__tagtable_begin; t < &__tagtable_end; t++) + if (tag->hdr.tag == t->tag) { + t->parse(tag); + break; + } + + return t < &__tagtable_end; +} + +/* + * Parse all tags in the list, checking both the global and architecture + * specific tag tables. + */ +static void __init parse_tags(const struct tag *t) +{ + for (; t->hdr.size; t = tag_next(t)) + if (!parse_tag(t)) + printk(KERN_WARNING + "Ignoring unrecognised tag 0x%08x\n", + t->hdr.tag); +} + +static void __init squash_mem_tags(struct tag *tag) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM) + tag->hdr.tag = ATAG_NONE; +} + +struct machine_desc * __init setup_machine_tags(phys_addr_t __atags_pointer, + unsigned int machine_nr) +{ + struct tag *tags = (struct tag *)&default_tags; + struct machine_desc *mdesc = NULL, *p; + char *from = default_command_line; + + default_tags.mem.start = PHYS_OFFSET; + + /* + * locate machine in the list of supported machines. + */ + for_each_machine_desc(p) + if (machine_nr == p->nr) { + printk("Machine: %s\n", p->name); + mdesc = p; + break; + } + + if (!mdesc) { + early_print("\nError: unrecognized/unsupported machine ID" + " (r1 = 0x%08x).\n\n", machine_nr); + dump_machine_table(); /* does not return */ + } + + if (__atags_pointer) + tags = phys_to_virt(__atags_pointer); + else if (mdesc->atag_offset) + tags = (void *)(PAGE_OFFSET + mdesc->atag_offset); + +#if defined(CONFIG_DEPRECATED_PARAM_STRUCT) + /* + * If we have the old style parameters, convert them to + * a tag list. + */ + if (tags->hdr.tag != ATAG_CORE) + convert_to_tag_list(tags); +#endif + if (tags->hdr.tag != ATAG_CORE) { + early_print("Warning: Neither atags nor dtb found\n"); + tags = (struct tag *)&default_tags; + } + + if (mdesc->fixup) + mdesc->fixup(tags, &from, &meminfo); + + if (tags->hdr.tag == ATAG_CORE) { + if (meminfo.nr_banks != 0) + squash_mem_tags(tags); + save_atags(tags); + parse_tags(tags); + } + + /* parse_early_param needs a boot_command_line */ + strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); + + return mdesc; +} diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags_proc.c similarity index 100% rename from arch/arm/kernel/atags.c rename to arch/arm/kernel/atags_proc.c diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 2b2f25e7fef5f07f545f8f5f0b9866a945a9026a..9b722612553ddbe3c03257b0e3d3fc8b6d939939 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -13,6 +13,7 @@ #include #include +#include #include static int debug_pci; @@ -270,15 +271,6 @@ static void __devinit pci_fixup_it8152(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8152, pci_fixup_it8152); - - -void __devinit pcibios_update_irq(struct pci_dev *dev, int irq) -{ - if (debug_pci) - printk("PCI: Assigning IRQ %02d to %s\n", irq, pci_name(dev)); - pci_write_config_byte(dev, PCI_INTERRUPT_LINE, irq); -} - /* * If the bus contains any of these devices, then we must not turn on * parity checking of any kind. Currently this is CyberPro 20x0 only. @@ -423,6 +415,38 @@ static int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) return irq; } +static int __init pcibios_init_resources(int busnr, struct pci_sys_data *sys) +{ + int ret; + struct pci_host_bridge_window *window; + + if (list_empty(&sys->resources)) { + pci_add_resource_offset(&sys->resources, + &iomem_resource, sys->mem_offset); + } + + list_for_each_entry(window, &sys->resources, list) { + if (resource_type(window->res) == IORESOURCE_IO) + return 0; + } + + sys->io_res.start = (busnr * SZ_64K) ? : pcibios_min_io; + sys->io_res.end = (busnr + 1) * SZ_64K - 1; + sys->io_res.flags = IORESOURCE_IO; + sys->io_res.name = sys->io_res_name; + sprintf(sys->io_res_name, "PCI%d I/O", busnr); + + ret = request_resource(&ioport_resource, &sys->io_res); + if (ret) { + pr_err("PCI: unable to allocate I/O port region (%d)\n", ret); + return ret; + } + pci_add_resource_offset(&sys->resources, &sys->io_res, + sys->io_offset); + + return 0; +} + static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head) { struct pci_sys_data *sys = NULL; @@ -445,11 +469,10 @@ static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head) ret = hw->setup(nr, sys); if (ret > 0) { - if (list_empty(&sys->resources)) { - pci_add_resource_offset(&sys->resources, - &ioport_resource, sys->io_offset); - pci_add_resource_offset(&sys->resources, - &iomem_resource, sys->mem_offset); + ret = pcibios_init_resources(nr, sys); + if (ret) { + kfree(sys); + break; } if (hw->scan) @@ -627,3 +650,15 @@ int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma, return 0; } + +void __init pci_map_io_early(unsigned long pfn) +{ + struct map_desc pci_io_desc = { + .virtual = PCI_IO_VIRT_BASE, + .type = MT_DEVICE, + .length = SZ_64K, + }; + + pci_io_desc.pfn = pfn; + iotable_init(&pci_io_desc, 1); +} diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 463ff4a0ec8acaa69372b8abd40a39260ee91736..e337879595e565e5666cbd8ac0c40a4a72908c0e 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -387,6 +387,7 @@ /* 375 */ CALL(sys_setns) CALL(sys_process_vm_readv) CALL(sys_process_vm_writev) + CALL(sys_ni_syscall) /* reserved for sys_kcmp */ #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/compat.h b/arch/arm/kernel/compat.h deleted file mode 100644 index 39264ab1b9c640cd81447f4a54ec1f19c118fede..0000000000000000000000000000000000000000 --- a/arch/arm/kernel/compat.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * linux/arch/arm/kernel/compat.h - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern void convert_to_tag_list(struct tag *tags); diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index c45522c36787fd3c62240076337a7cda2fee5489..66f711b2e0e856fa6485f96bc26f32f3c661c767 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -20,90 +20,9 @@ * references to these in a production kernel! */ -#if defined(CONFIG_DEBUG_ICEDCC) - @@ debug using ARM EmbeddedICE DCC channel - - .macro addruart, rp, rv, tmp - .endm - -#if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) || defined(CONFIG_CPU_V7) - - .macro senduart, rd, rx - mcr p14, 0, \rd, c0, c5, 0 - .endm - - .macro busyuart, rd, rx -1001: - mrc p14, 0, \rx, c0, c1, 0 - tst \rx, #0x20000000 - beq 1001b - .endm - - .macro waituart, rd, rx - mov \rd, #0x2000000 -1001: - subs \rd, \rd, #1 - bmi 1002f - mrc p14, 0, \rx, c0, c1, 0 - tst \rx, #0x20000000 - bne 1001b -1002: - .endm - -#elif defined(CONFIG_CPU_XSCALE) - - .macro senduart, rd, rx - mcr p14, 0, \rd, c8, c0, 0 - .endm - - .macro busyuart, rd, rx -1001: - mrc p14, 0, \rx, c14, c0, 0 - tst \rx, #0x10000000 - beq 1001b - .endm - - .macro waituart, rd, rx - mov \rd, #0x10000000 -1001: - subs \rd, \rd, #1 - bmi 1002f - mrc p14, 0, \rx, c14, c0, 0 - tst \rx, #0x10000000 - bne 1001b -1002: - .endm - -#else - - .macro senduart, rd, rx - mcr p14, 0, \rd, c1, c0, 0 - .endm - - .macro busyuart, rd, rx -1001: - mrc p14, 0, \rx, c0, c0, 0 - tst \rx, #2 - beq 1001b - - .endm - - .macro waituart, rd, rx - mov \rd, #0x2000000 -1001: - subs \rd, \rd, #1 - bmi 1002f - mrc p14, 0, \rx, c0, c0, 0 - tst \rx, #2 - bne 1001b -1002: - .endm - -#endif /* CONFIG_CPU_V6 */ - -#elif !defined(CONFIG_DEBUG_SEMIHOSTING) -#include -#endif /* CONFIG_DEBUG_ICEDCC */ +#if !defined(CONFIG_DEBUG_SEMIHOSTING) +#include CONFIG_DEBUG_LL_INCLUDE +#endif #ifdef CONFIG_MMU .macro addruart_current, rx, tmp1, tmp2 diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 978eac57e04a783f8901a16986f6d88f96f125ba..f45987037bf1c4467396799a117245cfede3d0d1 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -94,6 +94,15 @@ ENDPROC(ret_from_fork) .equ NR_syscalls,0 #define CALL(x) .equ NR_syscalls,NR_syscalls+1 #include "calls.S" + +/* + * Ensure that the system call table is equal to __NR_syscalls, + * which is the value the rest of the system sees + */ +.ifne NR_syscalls - __NR_syscalls +.error "__NR_syscalls is not equal to the size of the syscall table" +.endif + #undef CALL #define CALL(x) .long x diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 3db960e20cb8f0059adf749214849f4a9ba61c8c..9874d074119118f1d42abeee662beaa3433ca052 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -23,8 +23,8 @@ #include #include -#ifdef CONFIG_DEBUG_LL -#include +#if defined(CONFIG_DEBUG_LL) && !defined(CONFIG_DEBUG_SEMIHOSTING) +#include CONFIG_DEBUG_LL_INCLUDE #endif /* diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index ba386bd94107642d9819a7d8bafb7ba04e92b83f..281bf3301241fba2a1ce1baafeaf3020b7cd57ff 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -159,6 +159,12 @@ static int debug_arch_supported(void) arch >= ARM_DEBUG_ARCH_V7_1; } +/* Can we determine the watchpoint access type from the fsr? */ +static int debug_exception_updates_fsr(void) +{ + return 0; +} + /* Determine number of WRP registers available. */ static int get_num_wrp_resources(void) { @@ -604,13 +610,14 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) /* Aligned */ break; case 1: - /* Allow single byte watchpoint. */ - if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) - break; case 2: /* Allow halfword watchpoints and breakpoints. */ if (info->ctrl.len == ARM_BREAKPOINT_LEN_2) break; + case 3: + /* Allow single byte watchpoint. */ + if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) + break; default: ret = -EINVAL; goto out; @@ -619,18 +626,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) info->address &= ~alignment_mask; info->ctrl.len <<= offset; - /* - * Currently we rely on an overflow handler to take - * care of single-stepping the breakpoint when it fires. - * In the case of userspace breakpoints on a core with V7 debug, - * we can use the mismatch feature as a poor-man's hardware - * single-step, but this only works for per-task breakpoints. - */ - if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) || - !core_has_mismatch_brps() || !bp->hw.bp_target)) { - pr_warning("overflow handler required but none found\n"); - ret = -EINVAL; + if (!bp->overflow_handler) { + /* + * Mismatch breakpoints are required for single-stepping + * breakpoints. + */ + if (!core_has_mismatch_brps()) + return -EINVAL; + + /* We don't allow mismatch breakpoints in kernel space. */ + if (arch_check_bp_in_kernelspace(bp)) + return -EPERM; + + /* + * Per-cpu breakpoints are not supported by our stepping + * mechanism. + */ + if (!bp->hw.bp_target) + return -EINVAL; + + /* + * We only support specific access types if the fsr + * reports them. + */ + if (!debug_exception_updates_fsr() && + (info->ctrl.type == ARM_BREAKPOINT_LOAD || + info->ctrl.type == ARM_BREAKPOINT_STORE)) + return -EINVAL; } + out: return ret; } @@ -706,10 +730,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr, goto unlock; /* Check that the access type matches. */ - access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W : - HW_BREAKPOINT_R; - if (!(access & hw_breakpoint_type(wp))) - goto unlock; + if (debug_exception_updates_fsr()) { + access = (fsr & ARM_FSR_ACCESS_MASK) ? + HW_BREAKPOINT_W : HW_BREAKPOINT_R; + if (!(access & hw_breakpoint_type(wp))) + goto unlock; + } /* We have a winner. */ info->trigger = addr; diff --git a/arch/arm/kernel/leds.c b/arch/arm/kernel/leds.c deleted file mode 100644 index 1911dae19e4f6947c9f1401e3894c0b3cce72f77..0000000000000000000000000000000000000000 --- a/arch/arm/kernel/leds.c +++ /dev/null @@ -1,121 +0,0 @@ -/* - * LED support code, ripped out of arch/arm/kernel/time.c - * - * Copyright (C) 1994-2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include -#include -#include -#include -#include - -#include - -static void dummy_leds_event(led_event_t evt) -{ -} - -void (*leds_event)(led_event_t) = dummy_leds_event; - -struct leds_evt_name { - const char name[8]; - int on; - int off; -}; - -static const struct leds_evt_name evt_names[] = { - { "amber", led_amber_on, led_amber_off }, - { "blue", led_blue_on, led_blue_off }, - { "green", led_green_on, led_green_off }, - { "red", led_red_on, led_red_off }, -}; - -static ssize_t leds_store(struct device *dev, - struct device_attribute *attr, - const char *buf, size_t size) -{ - int ret = -EINVAL, len = strcspn(buf, " "); - - if (len > 0 && buf[len] == '\0') - len--; - - if (strncmp(buf, "claim", len) == 0) { - leds_event(led_claim); - ret = size; - } else if (strncmp(buf, "release", len) == 0) { - leds_event(led_release); - ret = size; - } else { - int i; - - for (i = 0; i < ARRAY_SIZE(evt_names); i++) { - if (strlen(evt_names[i].name) != len || - strncmp(buf, evt_names[i].name, len) != 0) - continue; - if (strncmp(buf+len, " on", 3) == 0) { - leds_event(evt_names[i].on); - ret = size; - } else if (strncmp(buf+len, " off", 4) == 0) { - leds_event(evt_names[i].off); - ret = size; - } - break; - } - } - return ret; -} - -static DEVICE_ATTR(event, 0200, NULL, leds_store); - -static struct bus_type leds_subsys = { - .name = "leds", - .dev_name = "leds", -}; - -static struct device leds_device = { - .id = 0, - .bus = &leds_subsys, -}; - -static int leds_suspend(void) -{ - leds_event(led_stop); - return 0; -} - -static void leds_resume(void) -{ - leds_event(led_start); -} - -static void leds_shutdown(void) -{ - leds_event(led_halted); -} - -static struct syscore_ops leds_syscore_ops = { - .shutdown = leds_shutdown, - .suspend = leds_suspend, - .resume = leds_resume, -}; - -static int __init leds_init(void) -{ - int ret; - ret = subsys_system_register(&leds_subsys, NULL); - if (ret == 0) - ret = device_register(&leds_device); - if (ret == 0) - ret = device_create_file(&leds_device, &dev_attr_event); - if (ret == 0) - register_syscore_ops(&leds_syscore_ops); - return ret; -} - -device_initcall(leds_init); - -EXPORT_SYMBOL(leds_event); diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index dfcdb9f7c1261143f93c31846ed372269a4b4783..e29c3337ca8142aeb6f4bb755e3947d6aecd4fbe 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -8,7 +8,9 @@ #include #include #include +#include #include +#include #include #include #include @@ -32,6 +34,29 @@ static atomic_t waiting_for_crash_ipi; int machine_kexec_prepare(struct kimage *image) { + struct kexec_segment *current_segment; + __be32 header; + int i, err; + + /* + * No segment at default ATAGs address. try to locate + * a dtb using magic. + */ + for (i = 0; i < image->nr_segments; i++) { + current_segment = &image->segment[i]; + + err = memblock_is_region_memory(current_segment->mem, + current_segment->memsz); + if (err) + return - EINVAL; + + err = get_user(header, (__be32*)current_segment->buf); + if (err) + return err; + + if (be32_to_cpu(header) == OF_DT_HEADER) + kexec_boot_atags = current_segment->mem; + } return 0; } @@ -122,7 +147,9 @@ void machine_kexec(struct kimage *image) kexec_start_address = image->start; kexec_indirection_page = page_list; kexec_mach_type = machine_arch_type; - kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; + if (!kexec_boot_atags) + kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; + /* copy our kernel relocation code to the control code page */ memcpy(reboot_code_buffer, diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index ab243b87118da54628c25b0069ecc52cc0d2f717..93971b1a4f0bb0d38eebd573f8618e994273b079 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -12,68 +12,15 @@ */ #define pr_fmt(fmt) "hw perfevents: " fmt -#include -#include #include -#include -#include #include -#include +#include #include -#include -#include #include #include #include -/* - * ARMv6 supports a maximum of 3 events, starting from index 0. If we add - * another platform that supports more, we need to increase this to be the - * largest of all platforms. - * - * ARMv7 supports up to 32 events: - * cycle counter CCNT + 31 events counters CNT0..30. - * Cortex-A8 has 1+4 counters, Cortex-A9 has 1+6 counters. - */ -#define ARMPMU_MAX_HWEVENTS 32 - -static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events); -static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask); -static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events); - -#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu)) - -/* Set at runtime when we know what CPU type we are. */ -static struct arm_pmu *cpu_pmu; - -const char *perf_pmu_name(void) -{ - if (!cpu_pmu) - return NULL; - - return cpu_pmu->pmu.name; -} -EXPORT_SYMBOL_GPL(perf_pmu_name); - -int perf_num_counters(void) -{ - int max_events = 0; - - if (cpu_pmu != NULL) - max_events = cpu_pmu->num_events; - - return max_events; -} -EXPORT_SYMBOL_GPL(perf_num_counters); - -#define HW_OP_UNSUPPORTED 0xFFFF - -#define C(_x) \ - PERF_COUNT_HW_CACHE_##_x - -#define CACHE_OP_UNSUPPORTED 0xFFFF - static int armpmu_map_cache_event(const unsigned (*cache_map) [PERF_COUNT_HW_CACHE_MAX] @@ -104,7 +51,7 @@ armpmu_map_cache_event(const unsigned (*cache_map) } static int -armpmu_map_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) +armpmu_map_hw_event(const unsigned (*event_map)[PERF_COUNT_HW_MAX], u64 config) { int mapping = (*event_map)[config]; return mapping == HW_OP_UNSUPPORTED ? -ENOENT : mapping; @@ -116,19 +63,20 @@ armpmu_map_raw_event(u32 raw_event_mask, u64 config) return (int)(config & raw_event_mask); } -static int map_cpu_event(struct perf_event *event, - const unsigned (*event_map)[PERF_COUNT_HW_MAX], - const unsigned (*cache_map) - [PERF_COUNT_HW_CACHE_MAX] - [PERF_COUNT_HW_CACHE_OP_MAX] - [PERF_COUNT_HW_CACHE_RESULT_MAX], - u32 raw_event_mask) +int +armpmu_map_event(struct perf_event *event, + const unsigned (*event_map)[PERF_COUNT_HW_MAX], + const unsigned (*cache_map) + [PERF_COUNT_HW_CACHE_MAX] + [PERF_COUNT_HW_CACHE_OP_MAX] + [PERF_COUNT_HW_CACHE_RESULT_MAX], + u32 raw_event_mask) { u64 config = event->attr.config; switch (event->attr.type) { case PERF_TYPE_HARDWARE: - return armpmu_map_event(event_map, config); + return armpmu_map_hw_event(event_map, config); case PERF_TYPE_HW_CACHE: return armpmu_map_cache_event(cache_map, config); case PERF_TYPE_RAW: @@ -222,7 +170,6 @@ armpmu_stop(struct perf_event *event, int flags) */ if (!(hwc->state & PERF_HES_STOPPED)) { armpmu->disable(hwc, hwc->idx); - barrier(); /* why? */ armpmu_event_update(event, hwc, hwc->idx); hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE; } @@ -350,99 +297,41 @@ validate_group(struct perf_event *event) return 0; } -static irqreturn_t armpmu_platform_irq(int irq, void *dev) +static irqreturn_t armpmu_dispatch_irq(int irq, void *dev) { struct arm_pmu *armpmu = (struct arm_pmu *) dev; struct platform_device *plat_device = armpmu->plat_device; struct arm_pmu_platdata *plat = dev_get_platdata(&plat_device->dev); - return plat->handle_irq(irq, dev, armpmu->handle_irq); + if (plat && plat->handle_irq) + return plat->handle_irq(irq, dev, armpmu->handle_irq); + else + return armpmu->handle_irq(irq, dev); } static void armpmu_release_hardware(struct arm_pmu *armpmu) { - int i, irq, irqs; - struct platform_device *pmu_device = armpmu->plat_device; - struct arm_pmu_platdata *plat = - dev_get_platdata(&pmu_device->dev); - - irqs = min(pmu_device->num_resources, num_possible_cpus()); - - for (i = 0; i < irqs; ++i) { - if (!cpumask_test_and_clear_cpu(i, &armpmu->active_irqs)) - continue; - irq = platform_get_irq(pmu_device, i); - if (irq >= 0) { - if (plat && plat->disable_irq) - plat->disable_irq(irq); - free_irq(irq, armpmu); - } - } - - release_pmu(armpmu->type); + armpmu->free_irq(); + pm_runtime_put_sync(&armpmu->plat_device->dev); } static int armpmu_reserve_hardware(struct arm_pmu *armpmu) { - struct arm_pmu_platdata *plat; - irq_handler_t handle_irq; - int i, err, irq, irqs; + int err; struct platform_device *pmu_device = armpmu->plat_device; if (!pmu_device) return -ENODEV; - err = reserve_pmu(armpmu->type); + pm_runtime_get_sync(&pmu_device->dev); + err = armpmu->request_irq(armpmu_dispatch_irq); if (err) { - pr_warning("unable to reserve pmu\n"); + armpmu_release_hardware(armpmu); return err; } - plat = dev_get_platdata(&pmu_device->dev); - if (plat && plat->handle_irq) - handle_irq = armpmu_platform_irq; - else - handle_irq = armpmu->handle_irq; - - irqs = min(pmu_device->num_resources, num_possible_cpus()); - if (irqs < 1) { - pr_err("no irqs for PMUs defined\n"); - return -ENODEV; - } - - for (i = 0; i < irqs; ++i) { - err = 0; - irq = platform_get_irq(pmu_device, i); - if (irq < 0) - continue; - - /* - * If we have a single PMU interrupt that we can't shift, - * assume that we're running on a uniprocessor machine and - * continue. Otherwise, continue without this interrupt. - */ - if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) { - pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n", - irq, i); - continue; - } - - err = request_irq(irq, handle_irq, - IRQF_DISABLED | IRQF_NOBALANCING, - "arm-pmu", armpmu); - if (err) { - pr_err("unable to request IRQ%d for ARM PMU counters\n", - irq); - armpmu_release_hardware(armpmu); - return err; - } else if (plat && plat->enable_irq) - plat->enable_irq(irq); - - cpumask_set_cpu(i, &armpmu->active_irqs); - } - return 0; } @@ -581,6 +470,32 @@ static void armpmu_disable(struct pmu *pmu) armpmu->stop(); } +#ifdef CONFIG_PM_RUNTIME +static int armpmu_runtime_resume(struct device *dev) +{ + struct arm_pmu_platdata *plat = dev_get_platdata(dev); + + if (plat && plat->runtime_resume) + return plat->runtime_resume(dev); + + return 0; +} + +static int armpmu_runtime_suspend(struct device *dev) +{ + struct arm_pmu_platdata *plat = dev_get_platdata(dev); + + if (plat && plat->runtime_suspend) + return plat->runtime_suspend(dev); + + return 0; +} +#endif + +const struct dev_pm_ops armpmu_dev_pm_ops = { + SET_RUNTIME_PM_OPS(armpmu_runtime_suspend, armpmu_runtime_resume, NULL) +}; + static void __init armpmu_init(struct arm_pmu *armpmu) { atomic_set(&armpmu->active_events, 0); @@ -598,174 +513,14 @@ static void __init armpmu_init(struct arm_pmu *armpmu) }; } -int __init armpmu_register(struct arm_pmu *armpmu, char *name, int type) +int armpmu_register(struct arm_pmu *armpmu, char *name, int type) { armpmu_init(armpmu); + pr_info("enabled with %s PMU driver, %d counters available\n", + armpmu->name, armpmu->num_events); return perf_pmu_register(&armpmu->pmu, name, type); } -/* Include the PMU-specific implementations. */ -#include "perf_event_xscale.c" -#include "perf_event_v6.c" -#include "perf_event_v7.c" - -/* - * Ensure the PMU has sane values out of reset. - * This requires SMP to be available, so exists as a separate initcall. - */ -static int __init -cpu_pmu_reset(void) -{ - if (cpu_pmu && cpu_pmu->reset) - return on_each_cpu(cpu_pmu->reset, NULL, 1); - return 0; -} -arch_initcall(cpu_pmu_reset); - -/* - * PMU platform driver and devicetree bindings. - */ -static struct of_device_id armpmu_of_device_ids[] = { - {.compatible = "arm,cortex-a9-pmu"}, - {.compatible = "arm,cortex-a8-pmu"}, - {.compatible = "arm,arm1136-pmu"}, - {.compatible = "arm,arm1176-pmu"}, - {}, -}; - -static struct platform_device_id armpmu_plat_device_ids[] = { - {.name = "arm-pmu"}, - {}, -}; - -static int __devinit armpmu_device_probe(struct platform_device *pdev) -{ - if (!cpu_pmu) - return -ENODEV; - - cpu_pmu->plat_device = pdev; - return 0; -} - -static struct platform_driver armpmu_driver = { - .driver = { - .name = "arm-pmu", - .of_match_table = armpmu_of_device_ids, - }, - .probe = armpmu_device_probe, - .id_table = armpmu_plat_device_ids, -}; - -static int __init register_pmu_driver(void) -{ - return platform_driver_register(&armpmu_driver); -} -device_initcall(register_pmu_driver); - -static struct pmu_hw_events *armpmu_get_cpu_events(void) -{ - return &__get_cpu_var(cpu_hw_events); -} - -static void __init cpu_pmu_init(struct arm_pmu *armpmu) -{ - int cpu; - for_each_possible_cpu(cpu) { - struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu); - events->events = per_cpu(hw_events, cpu); - events->used_mask = per_cpu(used_mask, cpu); - raw_spin_lock_init(&events->pmu_lock); - } - armpmu->get_hw_events = armpmu_get_cpu_events; - armpmu->type = ARM_PMU_DEVICE_CPU; -} - -/* - * PMU hardware loses all context when a CPU goes offline. - * When a CPU is hotplugged back in, since some hardware registers are - * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading - * junk values out of them. - */ -static int __cpuinit pmu_cpu_notify(struct notifier_block *b, - unsigned long action, void *hcpu) -{ - if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) - return NOTIFY_DONE; - - if (cpu_pmu && cpu_pmu->reset) - cpu_pmu->reset(NULL); - - return NOTIFY_OK; -} - -static struct notifier_block __cpuinitdata pmu_cpu_notifier = { - .notifier_call = pmu_cpu_notify, -}; - -/* - * CPU PMU identification and registration. - */ -static int __init -init_hw_perf_events(void) -{ - unsigned long cpuid = read_cpuid_id(); - unsigned long implementor = (cpuid & 0xFF000000) >> 24; - unsigned long part_number = (cpuid & 0xFFF0); - - /* ARM Ltd CPUs. */ - if (0x41 == implementor) { - switch (part_number) { - case 0xB360: /* ARM1136 */ - case 0xB560: /* ARM1156 */ - case 0xB760: /* ARM1176 */ - cpu_pmu = armv6pmu_init(); - break; - case 0xB020: /* ARM11mpcore */ - cpu_pmu = armv6mpcore_pmu_init(); - break; - case 0xC080: /* Cortex-A8 */ - cpu_pmu = armv7_a8_pmu_init(); - break; - case 0xC090: /* Cortex-A9 */ - cpu_pmu = armv7_a9_pmu_init(); - break; - case 0xC050: /* Cortex-A5 */ - cpu_pmu = armv7_a5_pmu_init(); - break; - case 0xC0F0: /* Cortex-A15 */ - cpu_pmu = armv7_a15_pmu_init(); - break; - case 0xC070: /* Cortex-A7 */ - cpu_pmu = armv7_a7_pmu_init(); - break; - } - /* Intel CPUs [xscale]. */ - } else if (0x69 == implementor) { - part_number = (cpuid >> 13) & 0x7; - switch (part_number) { - case 1: - cpu_pmu = xscale1pmu_init(); - break; - case 2: - cpu_pmu = xscale2pmu_init(); - break; - } - } - - if (cpu_pmu) { - pr_info("enabled with %s PMU driver, %d counters available\n", - cpu_pmu->name, cpu_pmu->num_events); - cpu_pmu_init(cpu_pmu); - register_cpu_notifier(&pmu_cpu_notifier); - armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW); - } else { - pr_info("no hardware support available\n"); - } - - return 0; -} -early_initcall(init_hw_perf_events); - /* * Callchain handling code. */ diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c new file mode 100644 index 0000000000000000000000000000000000000000..8d7d8d4de9d68ae8a8540335e525bf339b4f1354 --- /dev/null +++ b/arch/arm/kernel/perf_event_cpu.c @@ -0,0 +1,295 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * Copyright (C) 2012 ARM Limited + * + * Author: Will Deacon + */ +#define pr_fmt(fmt) "CPU PMU: " fmt + +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +/* Set at runtime when we know what CPU type we are. */ +static struct arm_pmu *cpu_pmu; + +static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events); +static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask); +static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events); + +/* + * Despite the names, these two functions are CPU-specific and are used + * by the OProfile/perf code. + */ +const char *perf_pmu_name(void) +{ + if (!cpu_pmu) + return NULL; + + return cpu_pmu->pmu.name; +} +EXPORT_SYMBOL_GPL(perf_pmu_name); + +int perf_num_counters(void) +{ + int max_events = 0; + + if (cpu_pmu != NULL) + max_events = cpu_pmu->num_events; + + return max_events; +} +EXPORT_SYMBOL_GPL(perf_num_counters); + +/* Include the PMU-specific implementations. */ +#include "perf_event_xscale.c" +#include "perf_event_v6.c" +#include "perf_event_v7.c" + +static struct pmu_hw_events *cpu_pmu_get_cpu_events(void) +{ + return &__get_cpu_var(cpu_hw_events); +} + +static void cpu_pmu_free_irq(void) +{ + int i, irq, irqs; + struct platform_device *pmu_device = cpu_pmu->plat_device; + + irqs = min(pmu_device->num_resources, num_possible_cpus()); + + for (i = 0; i < irqs; ++i) { + if (!cpumask_test_and_clear_cpu(i, &cpu_pmu->active_irqs)) + continue; + irq = platform_get_irq(pmu_device, i); + if (irq >= 0) + free_irq(irq, cpu_pmu); + } +} + +static int cpu_pmu_request_irq(irq_handler_t handler) +{ + int i, err, irq, irqs; + struct platform_device *pmu_device = cpu_pmu->plat_device; + + if (!pmu_device) + return -ENODEV; + + irqs = min(pmu_device->num_resources, num_possible_cpus()); + if (irqs < 1) { + pr_err("no irqs for PMUs defined\n"); + return -ENODEV; + } + + for (i = 0; i < irqs; ++i) { + err = 0; + irq = platform_get_irq(pmu_device, i); + if (irq < 0) + continue; + + /* + * If we have a single PMU interrupt that we can't shift, + * assume that we're running on a uniprocessor machine and + * continue. Otherwise, continue without this interrupt. + */ + if (irq_set_affinity(irq, cpumask_of(i)) && irqs > 1) { + pr_warning("unable to set irq affinity (irq=%d, cpu=%u)\n", + irq, i); + continue; + } + + err = request_irq(irq, handler, IRQF_NOBALANCING, "arm-pmu", + cpu_pmu); + if (err) { + pr_err("unable to request IRQ%d for ARM PMU counters\n", + irq); + return err; + } + + cpumask_set_cpu(i, &cpu_pmu->active_irqs); + } + + return 0; +} + +static void __devinit cpu_pmu_init(struct arm_pmu *cpu_pmu) +{ + int cpu; + for_each_possible_cpu(cpu) { + struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu); + events->events = per_cpu(hw_events, cpu); + events->used_mask = per_cpu(used_mask, cpu); + raw_spin_lock_init(&events->pmu_lock); + } + + cpu_pmu->get_hw_events = cpu_pmu_get_cpu_events; + cpu_pmu->request_irq = cpu_pmu_request_irq; + cpu_pmu->free_irq = cpu_pmu_free_irq; + + /* Ensure the PMU has sane values out of reset. */ + if (cpu_pmu && cpu_pmu->reset) + on_each_cpu(cpu_pmu->reset, NULL, 1); +} + +/* + * PMU hardware loses all context when a CPU goes offline. + * When a CPU is hotplugged back in, since some hardware registers are + * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading + * junk values out of them. + */ +static int __cpuinit cpu_pmu_notify(struct notifier_block *b, + unsigned long action, void *hcpu) +{ + if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING) + return NOTIFY_DONE; + + if (cpu_pmu && cpu_pmu->reset) + cpu_pmu->reset(NULL); + + return NOTIFY_OK; +} + +static struct notifier_block __cpuinitdata cpu_pmu_hotplug_notifier = { + .notifier_call = cpu_pmu_notify, +}; + +/* + * PMU platform driver and devicetree bindings. + */ +static struct of_device_id __devinitdata cpu_pmu_of_device_ids[] = { + {.compatible = "arm,cortex-a15-pmu", .data = armv7_a15_pmu_init}, + {.compatible = "arm,cortex-a9-pmu", .data = armv7_a9_pmu_init}, + {.compatible = "arm,cortex-a8-pmu", .data = armv7_a8_pmu_init}, + {.compatible = "arm,cortex-a7-pmu", .data = armv7_a7_pmu_init}, + {.compatible = "arm,cortex-a5-pmu", .data = armv7_a5_pmu_init}, + {.compatible = "arm,arm11mpcore-pmu", .data = armv6mpcore_pmu_init}, + {.compatible = "arm,arm1176-pmu", .data = armv6pmu_init}, + {.compatible = "arm,arm1136-pmu", .data = armv6pmu_init}, + {}, +}; + +static struct platform_device_id __devinitdata cpu_pmu_plat_device_ids[] = { + {.name = "arm-pmu"}, + {}, +}; + +/* + * CPU PMU identification and probing. + */ +static struct arm_pmu *__devinit probe_current_pmu(void) +{ + struct arm_pmu *pmu = NULL; + int cpu = get_cpu(); + unsigned long cpuid = read_cpuid_id(); + unsigned long implementor = (cpuid & 0xFF000000) >> 24; + unsigned long part_number = (cpuid & 0xFFF0); + + pr_info("probing PMU on CPU %d\n", cpu); + + /* ARM Ltd CPUs. */ + if (0x41 == implementor) { + switch (part_number) { + case 0xB360: /* ARM1136 */ + case 0xB560: /* ARM1156 */ + case 0xB760: /* ARM1176 */ + pmu = armv6pmu_init(); + break; + case 0xB020: /* ARM11mpcore */ + pmu = armv6mpcore_pmu_init(); + break; + case 0xC080: /* Cortex-A8 */ + pmu = armv7_a8_pmu_init(); + break; + case 0xC090: /* Cortex-A9 */ + pmu = armv7_a9_pmu_init(); + break; + case 0xC050: /* Cortex-A5 */ + pmu = armv7_a5_pmu_init(); + break; + case 0xC0F0: /* Cortex-A15 */ + pmu = armv7_a15_pmu_init(); + break; + case 0xC070: /* Cortex-A7 */ + pmu = armv7_a7_pmu_init(); + break; + } + /* Intel CPUs [xscale]. */ + } else if (0x69 == implementor) { + part_number = (cpuid >> 13) & 0x7; + switch (part_number) { + case 1: + pmu = xscale1pmu_init(); + break; + case 2: + pmu = xscale2pmu_init(); + break; + } + } + + put_cpu(); + return pmu; +} + +static int __devinit cpu_pmu_device_probe(struct platform_device *pdev) +{ + const struct of_device_id *of_id; + struct arm_pmu *(*init_fn)(void); + struct device_node *node = pdev->dev.of_node; + + if (cpu_pmu) { + pr_info("attempt to register multiple PMU devices!"); + return -ENOSPC; + } + + if (node && (of_id = of_match_node(cpu_pmu_of_device_ids, pdev->dev.of_node))) { + init_fn = of_id->data; + cpu_pmu = init_fn(); + } else { + cpu_pmu = probe_current_pmu(); + } + + if (!cpu_pmu) + return -ENODEV; + + cpu_pmu->plat_device = pdev; + cpu_pmu_init(cpu_pmu); + register_cpu_notifier(&cpu_pmu_hotplug_notifier); + armpmu_register(cpu_pmu, cpu_pmu->name, PERF_TYPE_RAW); + + return 0; +} + +static struct platform_driver cpu_pmu_driver = { + .driver = { + .name = "arm-pmu", + .pm = &armpmu_dev_pm_ops, + .of_match_table = cpu_pmu_of_device_ids, + }, + .probe = cpu_pmu_device_probe, + .id_table = cpu_pmu_plat_device_ids, +}; + +static int __init register_pmu_driver(void) +{ + return platform_driver_register(&cpu_pmu_driver); +} +device_initcall(register_pmu_driver); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index c90fcb2b69676b1f462c5be0160de35d9b2f1b26..6ccc0797174555ebc805a1aabe0bd77941badef0 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -645,7 +645,7 @@ armv6mpcore_pmu_disable_event(struct hw_perf_event *hwc, static int armv6_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv6_perf_map, + return armpmu_map_event(event, &armv6_perf_map, &armv6_perf_cache_map, 0xFF); } @@ -664,7 +664,7 @@ static struct arm_pmu armv6pmu = { .max_period = (1LLU << 32) - 1, }; -static struct arm_pmu *__init armv6pmu_init(void) +static struct arm_pmu *__devinit armv6pmu_init(void) { return &armv6pmu; } @@ -679,7 +679,7 @@ static struct arm_pmu *__init armv6pmu_init(void) static int armv6mpcore_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv6mpcore_perf_map, + return armpmu_map_event(event, &armv6mpcore_perf_map, &armv6mpcore_perf_cache_map, 0xFF); } @@ -698,17 +698,17 @@ static struct arm_pmu armv6mpcore_pmu = { .max_period = (1LLU << 32) - 1, }; -static struct arm_pmu *__init armv6mpcore_pmu_init(void) +static struct arm_pmu *__devinit armv6mpcore_pmu_init(void) { return &armv6mpcore_pmu; } #else -static struct arm_pmu *__init armv6pmu_init(void) +static struct arm_pmu *__devinit armv6pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv6mpcore_pmu_init(void) +static struct arm_pmu *__devinit armv6mpcore_pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index f04070bd21838dd9146d694066d756d2bb1e753a..bd4b090ebcfd8e2b6132a5d2e52a9eb890a34ea9 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -1204,31 +1204,31 @@ static void armv7pmu_reset(void *info) static int armv7_a8_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a8_perf_map, + return armpmu_map_event(event, &armv7_a8_perf_map, &armv7_a8_perf_cache_map, 0xFF); } static int armv7_a9_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a9_perf_map, + return armpmu_map_event(event, &armv7_a9_perf_map, &armv7_a9_perf_cache_map, 0xFF); } static int armv7_a5_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a5_perf_map, + return armpmu_map_event(event, &armv7_a5_perf_map, &armv7_a5_perf_cache_map, 0xFF); } static int armv7_a15_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a15_perf_map, + return armpmu_map_event(event, &armv7_a15_perf_map, &armv7_a15_perf_cache_map, 0xFF); } static int armv7_a7_map_event(struct perf_event *event) { - return map_cpu_event(event, &armv7_a7_perf_map, + return armpmu_map_event(event, &armv7_a7_perf_map, &armv7_a7_perf_cache_map, 0xFF); } @@ -1245,7 +1245,7 @@ static struct arm_pmu armv7pmu = { .max_period = (1LLU << 32) - 1, }; -static u32 __init armv7_read_num_pmnc_events(void) +static u32 __devinit armv7_read_num_pmnc_events(void) { u32 nb_cnt; @@ -1256,7 +1256,7 @@ static u32 __init armv7_read_num_pmnc_events(void) return nb_cnt + 1; } -static struct arm_pmu *__init armv7_a8_pmu_init(void) +static struct arm_pmu *__devinit armv7_a8_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A8"; armv7pmu.map_event = armv7_a8_map_event; @@ -1264,7 +1264,7 @@ static struct arm_pmu *__init armv7_a8_pmu_init(void) return &armv7pmu; } -static struct arm_pmu *__init armv7_a9_pmu_init(void) +static struct arm_pmu *__devinit armv7_a9_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A9"; armv7pmu.map_event = armv7_a9_map_event; @@ -1272,7 +1272,7 @@ static struct arm_pmu *__init armv7_a9_pmu_init(void) return &armv7pmu; } -static struct arm_pmu *__init armv7_a5_pmu_init(void) +static struct arm_pmu *__devinit armv7_a5_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A5"; armv7pmu.map_event = armv7_a5_map_event; @@ -1280,7 +1280,7 @@ static struct arm_pmu *__init armv7_a5_pmu_init(void) return &armv7pmu; } -static struct arm_pmu *__init armv7_a15_pmu_init(void) +static struct arm_pmu *__devinit armv7_a15_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A15"; armv7pmu.map_event = armv7_a15_map_event; @@ -1289,7 +1289,7 @@ static struct arm_pmu *__init armv7_a15_pmu_init(void) return &armv7pmu; } -static struct arm_pmu *__init armv7_a7_pmu_init(void) +static struct arm_pmu *__devinit armv7_a7_pmu_init(void) { armv7pmu.name = "ARMv7 Cortex-A7"; armv7pmu.map_event = armv7_a7_map_event; @@ -1298,27 +1298,27 @@ static struct arm_pmu *__init armv7_a7_pmu_init(void) return &armv7pmu; } #else -static struct arm_pmu *__init armv7_a8_pmu_init(void) +static struct arm_pmu *__devinit armv7_a8_pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv7_a9_pmu_init(void) +static struct arm_pmu *__devinit armv7_a9_pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv7_a5_pmu_init(void) +static struct arm_pmu *__devinit armv7_a5_pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv7_a15_pmu_init(void) +static struct arm_pmu *__devinit armv7_a15_pmu_init(void) { return NULL; } -static struct arm_pmu *__init armv7_a7_pmu_init(void) +static struct arm_pmu *__devinit armv7_a7_pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index f759fe0bab632303b34484001ca2b6a9e91452f1..426e19f380a2f935b7b1c9706a6c50613ce4e272 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -430,7 +430,7 @@ xscale1pmu_write_counter(int counter, u32 val) static int xscale_map_event(struct perf_event *event) { - return map_cpu_event(event, &xscale_perf_map, + return armpmu_map_event(event, &xscale_perf_map, &xscale_perf_cache_map, 0xFF); } @@ -449,7 +449,7 @@ static struct arm_pmu xscale1pmu = { .max_period = (1LLU << 32) - 1, }; -static struct arm_pmu *__init xscale1pmu_init(void) +static struct arm_pmu *__devinit xscale1pmu_init(void) { return &xscale1pmu; } @@ -816,17 +816,17 @@ static struct arm_pmu xscale2pmu = { .max_period = (1LLU << 32) - 1, }; -static struct arm_pmu *__init xscale2pmu_init(void) +static struct arm_pmu *__devinit xscale2pmu_init(void) { return &xscale2pmu; } #else -static struct arm_pmu *__init xscale1pmu_init(void) +static struct arm_pmu *__devinit xscale1pmu_init(void) { return NULL; } -static struct arm_pmu *__init xscale2pmu_init(void) +static struct arm_pmu *__devinit xscale2pmu_init(void) { return NULL; } diff --git a/arch/arm/kernel/pmu.c b/arch/arm/kernel/pmu.c deleted file mode 100644 index 2334bf8a650a16a35d5849a4b6c309d5f19eb1f1..0000000000000000000000000000000000000000 --- a/arch/arm/kernel/pmu.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * linux/arch/arm/kernel/pmu.c - * - * Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles - * Copyright (C) 2010 ARM Ltd, Will Deacon - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#include -#include -#include - -#include - -/* - * PMU locking to ensure mutual exclusion between different subsystems. - */ -static unsigned long pmu_lock[BITS_TO_LONGS(ARM_NUM_PMU_DEVICES)]; - -int -reserve_pmu(enum arm_pmu_type type) -{ - return test_and_set_bit_lock(type, pmu_lock) ? -EBUSY : 0; -} -EXPORT_SYMBOL_GPL(reserve_pmu); - -void -release_pmu(enum arm_pmu_type type) -{ - clear_bit_unlock(type, pmu_lock); -} -EXPORT_SYMBOL_GPL(release_pmu); diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 693b744fd572f163f053c9fef42d563e246e04d3..04eea22d7958637f17456c7e2f37ac7b71e8e182 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -31,9 +31,9 @@ #include #include #include +#include #include -#include #include #include #include @@ -189,7 +189,7 @@ void cpu_idle(void) while (1) { tick_nohz_idle_enter(); rcu_idle_enter(); - leds_event(led_idle_start); + ledtrig_cpu(CPU_LED_IDLE_START); while (!need_resched()) { #ifdef CONFIG_HOTPLUG_CPU if (cpu_is_offline(smp_processor_id())) @@ -220,7 +220,7 @@ void cpu_idle(void) } else local_irq_enable(); } - leds_event(led_idle_end); + ledtrig_cpu(CPU_LED_IDLE_END); rcu_idle_exit(); tick_nohz_idle_exit(); schedule_preempt_disabled(); diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 3e0fc5f7ed4b05cb09df7c58f7098492176a568b..739db3a1b2d279216336025d88586d3ffd07a0e0 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -30,6 +30,9 @@ #include #include +#define CREATE_TRACE_POINTS +#include + #define REG_PC 15 #define REG_PSR 16 /* @@ -918,11 +921,11 @@ static int ptrace_syscall_trace(struct pt_regs *regs, int scno, { unsigned long ip; + current_thread_info()->syscall = scno; + if (!test_thread_flag(TIF_SYSCALL_TRACE)) return scno; - current_thread_info()->syscall = scno; - /* * IP is used to denote syscall entry/exit: * IP = 0 -> entry, =1 -> exit @@ -941,15 +944,19 @@ static int ptrace_syscall_trace(struct pt_regs *regs, int scno, asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) { - int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER); + scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER); + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) + trace_sys_enter(regs, scno); audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); - return ret; + return scno; } asmlinkage int syscall_trace_exit(struct pt_regs *regs, int scno) { - int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT); + scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT); + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) + trace_sys_exit(regs, scno); audit_syscall_exit(regs); - return ret; + return scno; } diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index 27d186abbc06f8aa3aa6310faa5b67039d447f03..e21bac20d90da1558000125586623bdb9cbe328c 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -21,10 +22,15 @@ struct clock_data { u32 epoch_cyc_copy; u32 mult; u32 shift; + bool suspended; + bool needs_suspend; }; static void sched_clock_poll(unsigned long wrap_ticks); static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0); +static int irqtime = -1; + +core_param(irqtime, irqtime, int, 0400); static struct clock_data cd = { .mult = NSEC_PER_SEC / HZ, @@ -49,6 +55,9 @@ static unsigned long long cyc_to_sched_clock(u32 cyc, u32 mask) u64 epoch_ns; u32 epoch_cyc; + if (cd.suspended) + return cd.epoch_ns; + /* * Load the epoch_cyc and epoch_ns atomically. We do this by * ensuring that we always write epoch_cyc, epoch_ns and @@ -98,6 +107,13 @@ static void sched_clock_poll(unsigned long wrap_ticks) update_sched_clock(); } +void __init setup_sched_clock_needs_suspend(u32 (*read)(void), int bits, + unsigned long rate) +{ + setup_sched_clock(read, bits, rate); + cd.needs_suspend = true; +} + void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) { unsigned long r, w; @@ -145,6 +161,10 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) */ cd.epoch_ns = 0; + /* Enable IRQ time accounting if we have a fast enough sched_clock */ + if (irqtime > 0 || (irqtime == -1 && rate >= 1000000)) + enable_sched_clock_irqtime(); + pr_debug("Registered %pF as sched_clock source\n", read); } @@ -169,11 +189,23 @@ void __init sched_clock_postinit(void) static int sched_clock_suspend(void) { sched_clock_poll(sched_clock_timer.data); + if (cd.needs_suspend) + cd.suspended = true; return 0; } +static void sched_clock_resume(void) +{ + if (cd.needs_suspend) { + cd.epoch_cyc = read_sched_clock(); + cd.epoch_cyc_copy = cd.epoch_cyc; + cd.suspended = false; + } +} + static struct syscore_ops sched_clock_ops = { .suspend = sched_clock_suspend, + .resume = sched_clock_resume, }; static int __init sched_clock_syscore_init(void) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index a81dcecc734388f7745e399e38504645f4e0e758..febafa0f552d6a75e2bc51755054a8b6e68cf5a8 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -21,11 +21,9 @@ #include #include #include -#include #include #include #include -#include #include #include #include @@ -56,15 +54,9 @@ #include #include -#if defined(CONFIG_DEPRECATED_PARAM_STRUCT) -#include "compat.h" -#endif #include "atags.h" #include "tcm.h" -#ifndef MEM_SIZE -#define MEM_SIZE (16*1024*1024) -#endif #if defined(CONFIG_FPE_NWFPE) || defined(CONFIG_FPE_FASTFPE) char fpe_type[8]; @@ -145,7 +137,6 @@ static const char *machine_name; static char __initdata cmd_line[COMMAND_LINE_SIZE]; struct machine_desc *machine_desc __initdata; -static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } }; #define ENDIANNESS ((char)endian_test.l) @@ -583,21 +574,6 @@ static int __init early_mem(char *p) } early_param("mem", early_mem); -static void __init -setup_ramdisk(int doload, int prompt, int image_start, unsigned int rd_sz) -{ -#ifdef CONFIG_BLK_DEV_RAM - extern int rd_size, rd_image_start, rd_prompt, rd_doload; - - rd_image_start = image_start; - rd_prompt = prompt; - rd_doload = doload; - - if (rd_sz) - rd_size = rd_sz; -#endif -} - static void __init request_standard_resources(struct machine_desc *mdesc) { struct memblock_region *region; @@ -643,35 +619,6 @@ static void __init request_standard_resources(struct machine_desc *mdesc) request_resource(&ioport_resource, &lp2); } -/* - * Tag parsing. - * - * This is the new way of passing data to the kernel at boot time. Rather - * than passing a fixed inflexible structure to the kernel, we pass a list - * of variable-sized tags to the kernel. The first tag must be a ATAG_CORE - * tag for the list to be recognised (to distinguish the tagged list from - * a param_struct). The list is terminated with a zero-length tag (this tag - * is not parsed in any way). - */ -static int __init parse_tag_core(const struct tag *tag) -{ - if (tag->hdr.size > 2) { - if ((tag->u.core.flags & 1) == 0) - root_mountflags &= ~MS_RDONLY; - ROOT_DEV = old_decode_dev(tag->u.core.rootdev); - } - return 0; -} - -__tagtable(ATAG_CORE, parse_tag_core); - -static int __init parse_tag_mem32(const struct tag *tag) -{ - return arm_add_memory(tag->u.mem.start, tag->u.mem.size); -} - -__tagtable(ATAG_MEM, parse_tag_mem32); - #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) struct screen_info screen_info = { .orig_video_lines = 30, @@ -681,116 +628,7 @@ struct screen_info screen_info = { .orig_video_isVGA = 1, .orig_video_points = 8 }; - -static int __init parse_tag_videotext(const struct tag *tag) -{ - screen_info.orig_x = tag->u.videotext.x; - screen_info.orig_y = tag->u.videotext.y; - screen_info.orig_video_page = tag->u.videotext.video_page; - screen_info.orig_video_mode = tag->u.videotext.video_mode; - screen_info.orig_video_cols = tag->u.videotext.video_cols; - screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx; - screen_info.orig_video_lines = tag->u.videotext.video_lines; - screen_info.orig_video_isVGA = tag->u.videotext.video_isvga; - screen_info.orig_video_points = tag->u.videotext.video_points; - return 0; -} - -__tagtable(ATAG_VIDEOTEXT, parse_tag_videotext); -#endif - -static int __init parse_tag_ramdisk(const struct tag *tag) -{ - setup_ramdisk((tag->u.ramdisk.flags & 1) == 0, - (tag->u.ramdisk.flags & 2) == 0, - tag->u.ramdisk.start, tag->u.ramdisk.size); - return 0; -} - -__tagtable(ATAG_RAMDISK, parse_tag_ramdisk); - -static int __init parse_tag_serialnr(const struct tag *tag) -{ - system_serial_low = tag->u.serialnr.low; - system_serial_high = tag->u.serialnr.high; - return 0; -} - -__tagtable(ATAG_SERIAL, parse_tag_serialnr); - -static int __init parse_tag_revision(const struct tag *tag) -{ - system_rev = tag->u.revision.rev; - return 0; -} - -__tagtable(ATAG_REVISION, parse_tag_revision); - -static int __init parse_tag_cmdline(const struct tag *tag) -{ -#if defined(CONFIG_CMDLINE_EXTEND) - strlcat(default_command_line, " ", COMMAND_LINE_SIZE); - strlcat(default_command_line, tag->u.cmdline.cmdline, - COMMAND_LINE_SIZE); -#elif defined(CONFIG_CMDLINE_FORCE) - pr_warning("Ignoring tag cmdline (using the default kernel command line)\n"); -#else - strlcpy(default_command_line, tag->u.cmdline.cmdline, - COMMAND_LINE_SIZE); #endif - return 0; -} - -__tagtable(ATAG_CMDLINE, parse_tag_cmdline); - -/* - * Scan the tag table for this tag, and call its parse function. - * The tag table is built by the linker from all the __tagtable - * declarations. - */ -static int __init parse_tag(const struct tag *tag) -{ - extern struct tagtable __tagtable_begin, __tagtable_end; - struct tagtable *t; - - for (t = &__tagtable_begin; t < &__tagtable_end; t++) - if (tag->hdr.tag == t->tag) { - t->parse(tag); - break; - } - - return t < &__tagtable_end; -} - -/* - * Parse all tags in the list, checking both the global and architecture - * specific tag tables. - */ -static void __init parse_tags(const struct tag *t) -{ - for (; t->hdr.size; t = tag_next(t)) - if (!parse_tag(t)) - printk(KERN_WARNING - "Ignoring unrecognised tag 0x%08x\n", - t->hdr.tag); -} - -/* - * This holds our defaults. - */ -static struct init_tags { - struct tag_header hdr1; - struct tag_core core; - struct tag_header hdr2; - struct tag_mem32 mem; - struct tag_header hdr3; -} init_tags __initdata = { - { tag_size(tag_core), ATAG_CORE }, - { 1, PAGE_SIZE, 0xff }, - { tag_size(tag_mem32), ATAG_MEM }, - { MEM_SIZE }, - { 0, ATAG_NONE } -}; static int __init customize_machine(void) { @@ -858,78 +696,6 @@ static void __init reserve_crashkernel(void) static inline void reserve_crashkernel(void) {} #endif /* CONFIG_KEXEC */ -static void __init squash_mem_tags(struct tag *tag) -{ - for (; tag->hdr.size; tag = tag_next(tag)) - if (tag->hdr.tag == ATAG_MEM) - tag->hdr.tag = ATAG_NONE; -} - -static struct machine_desc * __init setup_machine_tags(unsigned int nr) -{ - struct tag *tags = (struct tag *)&init_tags; - struct machine_desc *mdesc = NULL, *p; - char *from = default_command_line; - - init_tags.mem.start = PHYS_OFFSET; - - /* - * locate machine in the list of supported machines. - */ - for_each_machine_desc(p) - if (nr == p->nr) { - printk("Machine: %s\n", p->name); - mdesc = p; - break; - } - - if (!mdesc) { - early_print("\nError: unrecognized/unsupported machine ID" - " (r1 = 0x%08x).\n\n", nr); - dump_machine_table(); /* does not return */ - } - - if (__atags_pointer) - tags = phys_to_virt(__atags_pointer); - else if (mdesc->atag_offset) - tags = (void *)(PAGE_OFFSET + mdesc->atag_offset); - -#if defined(CONFIG_DEPRECATED_PARAM_STRUCT) - /* - * If we have the old style parameters, convert them to - * a tag list. - */ - if (tags->hdr.tag != ATAG_CORE) - convert_to_tag_list(tags); -#endif - - if (tags->hdr.tag != ATAG_CORE) { -#if defined(CONFIG_OF) - /* - * If CONFIG_OF is set, then assume this is a reasonably - * modern system that should pass boot parameters - */ - early_print("Warning: Neither atags nor dtb found\n"); -#endif - tags = (struct tag *)&init_tags; - } - - if (mdesc->fixup) - mdesc->fixup(tags, &from, &meminfo); - - if (tags->hdr.tag == ATAG_CORE) { - if (meminfo.nr_banks != 0) - squash_mem_tags(tags); - save_atags(tags); - parse_tags(tags); - } - - /* parse_early_param needs a boot_command_line */ - strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); - - return mdesc; -} - static int __init meminfo_cmp(const void *_a, const void *_b) { const struct membank *a = _a, *b = _b; @@ -944,7 +710,7 @@ void __init setup_arch(char **cmdline_p) setup_processor(); mdesc = setup_machine_fdt(__atags_pointer); if (!mdesc) - mdesc = setup_machine_tags(machine_arch_type); + mdesc = setup_machine_tags(__atags_pointer, machine_arch_type); machine_desc = mdesc; machine_name = mdesc->name; @@ -977,8 +743,10 @@ void __init setup_arch(char **cmdline_p) unflatten_device_tree(); #ifdef CONFIG_SMP - if (is_smp()) + if (is_smp()) { + smp_set_ops(mdesc->smp); smp_init_cpus(); + } #endif reserve_crashkernel(); diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index ebd8ad274d76bb82488240e9543d7a1d99b5c674..d100eacdb7983f8e490a8dc88d4f830b7fab3b8c 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -19,14 +19,15 @@ #include #include #include -#include #include #include #include #include #include +#include #include +#include #include #include #include @@ -42,6 +43,7 @@ #include #include #include +#include /* * as from 2.5, kernels no longer have an init_tasks structure @@ -50,8 +52,15 @@ */ struct secondary_data secondary_data; +/* + * control for which core is the next to come out of the secondary + * boot "holding pen" + */ +volatile int __cpuinitdata pen_release = -1; + enum ipi_msg_type { - IPI_TIMER = 2, + IPI_WAKEUP, + IPI_TIMER, IPI_RESCHEDULE, IPI_CALL_FUNC, IPI_CALL_FUNC_SINGLE, @@ -60,6 +69,14 @@ enum ipi_msg_type { static DECLARE_COMPLETION(cpu_running); +static struct smp_operations smp_ops; + +void __init smp_set_ops(struct smp_operations *ops) +{ + if (ops) + smp_ops = *ops; +}; + int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle) { int ret; @@ -100,13 +117,64 @@ int __cpuinit __cpu_up(unsigned int cpu, struct task_struct *idle) return ret; } +/* platform specific SMP operations */ +void __init smp_init_cpus(void) +{ + if (smp_ops.smp_init_cpus) + smp_ops.smp_init_cpus(); +} + +static void __init platform_smp_prepare_cpus(unsigned int max_cpus) +{ + if (smp_ops.smp_prepare_cpus) + smp_ops.smp_prepare_cpus(max_cpus); +} + +static void __cpuinit platform_secondary_init(unsigned int cpu) +{ + if (smp_ops.smp_secondary_init) + smp_ops.smp_secondary_init(cpu); +} + +int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + if (smp_ops.smp_boot_secondary) + return smp_ops.smp_boot_secondary(cpu, idle); + return -ENOSYS; +} + #ifdef CONFIG_HOTPLUG_CPU static void percpu_timer_stop(void); +static int platform_cpu_kill(unsigned int cpu) +{ + if (smp_ops.cpu_kill) + return smp_ops.cpu_kill(cpu); + return 1; +} + +static void platform_cpu_die(unsigned int cpu) +{ + if (smp_ops.cpu_die) + smp_ops.cpu_die(cpu); +} + +static int platform_cpu_disable(unsigned int cpu) +{ + if (smp_ops.cpu_disable) + return smp_ops.cpu_disable(cpu); + + /* + * By default, allow disabling all CPUs except the first one, + * since this is special on a lot of platforms, e.g. because + * of clock tick interrupts. + */ + return cpu == 0 ? -EPERM : 0; +} /* * __cpu_disable runs on the processor to be shutdown. */ -int __cpu_disable(void) +int __cpuinit __cpu_disable(void) { unsigned int cpu = smp_processor_id(); int ret; @@ -149,7 +217,7 @@ static DECLARE_COMPLETION(cpu_died); * called on the thread which is asking for a CPU to be shutdown - * waits until shutdown has completed, or it is timed out. */ -void __cpu_die(unsigned int cpu) +void __cpuinit __cpu_die(unsigned int cpu) { if (!wait_for_completion_timeout(&cpu_died, msecs_to_jiffies(5000))) { pr_err("CPU%u: cpu didn't die\n", cpu); @@ -347,7 +415,8 @@ void arch_send_call_function_single_ipi(int cpu) } static const char *ipi_types[NR_IPI] = { -#define S(x,s) [x - IPI_TIMER] = s +#define S(x,s) [x] = s + S(IPI_WAKEUP, "CPU wakeup interrupts"), S(IPI_TIMER, "Timer broadcast interrupts"), S(IPI_RESCHEDULE, "Rescheduling interrupts"), S(IPI_CALL_FUNC, "Function call interrupts"), @@ -500,10 +569,13 @@ void handle_IPI(int ipinr, struct pt_regs *regs) unsigned int cpu = smp_processor_id(); struct pt_regs *old_regs = set_irq_regs(regs); - if (ipinr >= IPI_TIMER && ipinr < IPI_TIMER + NR_IPI) - __inc_irq_stat(cpu, ipi_irqs[ipinr - IPI_TIMER]); + if (ipinr < NR_IPI) + __inc_irq_stat(cpu, ipi_irqs[ipinr]); switch (ipinr) { + case IPI_WAKEUP: + break; + case IPI_TIMER: irq_enter(); ipi_timer(); @@ -584,3 +656,56 @@ int setup_profiling_timer(unsigned int multiplier) { return -EINVAL; } + +#ifdef CONFIG_CPU_FREQ + +static DEFINE_PER_CPU(unsigned long, l_p_j_ref); +static DEFINE_PER_CPU(unsigned long, l_p_j_ref_freq); +static unsigned long global_l_p_j_ref; +static unsigned long global_l_p_j_ref_freq; + +static int cpufreq_callback(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct cpufreq_freqs *freq = data; + int cpu = freq->cpu; + + if (freq->flags & CPUFREQ_CONST_LOOPS) + return NOTIFY_OK; + + if (!per_cpu(l_p_j_ref, cpu)) { + per_cpu(l_p_j_ref, cpu) = + per_cpu(cpu_data, cpu).loops_per_jiffy; + per_cpu(l_p_j_ref_freq, cpu) = freq->old; + if (!global_l_p_j_ref) { + global_l_p_j_ref = loops_per_jiffy; + global_l_p_j_ref_freq = freq->old; + } + } + + if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || + (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || + (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) { + loops_per_jiffy = cpufreq_scale(global_l_p_j_ref, + global_l_p_j_ref_freq, + freq->new); + per_cpu(cpu_data, cpu).loops_per_jiffy = + cpufreq_scale(per_cpu(l_p_j_ref, cpu), + per_cpu(l_p_j_ref_freq, cpu), + freq->new); + } + return NOTIFY_OK; +} + +static struct notifier_block cpufreq_notifier = { + .notifier_call = cpufreq_callback, +}; + +static int __init register_cpufreq_notifier(void) +{ + return cpufreq_register_notifier(&cpufreq_notifier, + CPUFREQ_TRANSITION_NOTIFIER); +} +core_initcall(register_cpufreq_notifier); + +#endif diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index fef42b21cecba517e67e8ed74ef8c88d3cfd2afd..e1f906989bb8161963d8a714073a8d84a8e2c2e6 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -96,7 +95,52 @@ static void twd_timer_stop(struct clock_event_device *clk) disable_percpu_irq(clk->irq); } -#ifdef CONFIG_CPU_FREQ +#ifdef CONFIG_COMMON_CLK + +/* + * Updates clockevent frequency when the cpu frequency changes. + * Called on the cpu that is changing frequency with interrupts disabled. + */ +static void twd_update_frequency(void *new_rate) +{ + twd_timer_rate = *((unsigned long *) new_rate); + + clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate); +} + +static int twd_rate_change(struct notifier_block *nb, + unsigned long flags, void *data) +{ + struct clk_notifier_data *cnd = data; + + /* + * The twd clock events must be reprogrammed to account for the new + * frequency. The timer is local to a cpu, so cross-call to the + * changing cpu. + */ + if (flags == POST_RATE_CHANGE) + smp_call_function(twd_update_frequency, + (void *)&cnd->new_rate, 1); + + return NOTIFY_OK; +} + +static struct notifier_block twd_clk_nb = { + .notifier_call = twd_rate_change, +}; + +static int twd_clk_init(void) +{ + if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) + return clk_notifier_register(twd_clk, &twd_clk_nb); + + return 0; +} +core_initcall(twd_clk_init); + +#elif defined (CONFIG_CPU_FREQ) + +#include /* * Updates clockevent frequency when the cpu frequency changes. diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index af2afb019672afdb5d3654f12c799f69799a1dbc..09be0c3c906965822d206b4268a97fbe275bc5f8 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -25,7 +25,6 @@ #include #include -#include #include #include #include @@ -80,21 +79,6 @@ u32 arch_gettimeoffset(void) } #endif /* CONFIG_ARCH_USES_GETTIMEOFFSET */ -#ifdef CONFIG_LEDS_TIMER -static inline void do_leds(void) -{ - static unsigned int count = HZ/2; - - if (--count == 0) { - count = HZ/2; - leds_event(led_timer); - } -} -#else -#define do_leds() -#endif - - #ifndef CONFIG_GENERIC_CLOCKEVENTS /* * Kernel system timer support. @@ -102,7 +86,6 @@ static inline void do_leds(void) void timer_tick(void) { profile_tick(CPU_PROFILING); - do_leds(); xtime_update(1); #ifndef CONFIG_SMP update_process_times(user_mode(get_irq_regs())); diff --git a/arch/arm/kernel/topology.c b/arch/arm/kernel/topology.c index 198b08456e905e42d1c09819083c003d9a59e988..26c12c6440fcde02a3829f1ed3e1035f16ed6338 100644 --- a/arch/arm/kernel/topology.c +++ b/arch/arm/kernel/topology.c @@ -321,7 +321,7 @@ void store_cpu_topology(unsigned int cpuid) * init_cpu_topology is called at boot when only one cpu is running * which prevent simultaneous write access to cpu_topology array */ -void init_cpu_topology(void) +void __init init_cpu_topology(void) { unsigned int cpu; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f7945218b8c63a722cf08badc229345d7083b052..b0179b89a04ce26062184aaf23f86c521fb3009c 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -420,20 +420,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) #endif instr = *(u32 *) pc; } else if (thumb_mode(regs)) { - get_user(instr, (u16 __user *)pc); + if (get_user(instr, (u16 __user *)pc)) + goto die_sig; if (is_wide_instruction(instr)) { unsigned int instr2; - get_user(instr2, (u16 __user *)pc+1); + if (get_user(instr2, (u16 __user *)pc+1)) + goto die_sig; instr <<= 16; instr |= instr2; } - } else { - get_user(instr, (u32 __user *)pc); + } else if (get_user(instr, (u32 __user *)pc)) { + goto die_sig; } if (call_undef_hook(regs, instr) == 0) return; +die_sig: #ifdef CONFIG_DEBUG_USER if (user_debug & UDBG_UNDEFINED) { printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n", diff --git a/arch/arm/lib/Makefile b/arch/arm/lib/Makefile index 2473fd1fd51cfa50ef02985e6e8d83c5f97119c8..af72969820b4951448c9d95135383ae9d8387cde 100644 --- a/arch/arm/lib/Makefile +++ b/arch/arm/lib/Makefile @@ -16,13 +16,30 @@ lib-y := backtrace.o changebit.o csumipv6.o csumpartial.o \ call_with_stack.o mmu-y := clear_user.o copy_page.o getuser.o putuser.o -mmu-y += copy_from_user.o copy_to_user.o + +# the code in uaccess.S is not preemption safe and +# probably faster on ARMv3 only +ifeq ($(CONFIG_PREEMPT),y) + mmu-y += copy_from_user.o copy_to_user.o +else +ifneq ($(CONFIG_CPU_32v3),y) + mmu-y += copy_from_user.o copy_to_user.o +else + mmu-y += uaccess.o +endif +endif # using lib_ here won't override already available weak symbols obj-$(CONFIG_UACCESS_WITH_MEMCPY) += uaccess_with_memcpy.o -lib-$(CONFIG_MMU) += $(mmu-y) -lib-y += io-readsw-armv4.o io-writesw-armv4.o +lib-$(CONFIG_MMU) += $(mmu-y) + +ifeq ($(CONFIG_CPU_32v3),y) + lib-y += io-readsw-armv3.o io-writesw-armv3.o +else + lib-y += io-readsw-armv4.o io-writesw-armv4.o +endif + lib-$(CONFIG_ARCH_RPC) += ecard.o io-acorn.o floppydma.o lib-$(CONFIG_ARCH_SHARK) += io-shark.o diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index d6dacc69254e47ddca3f399cc6f37eef12b073d8..9d0a30032d7f0f2ae50f0cbe9eebb80d6da827a3 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -34,7 +34,18 @@ struct arm_delay_ops arm_delay_ops = { .udelay = __loop_udelay, }; -#ifdef ARCH_HAS_READ_CURRENT_TIMER +static const struct delay_timer *delay_timer; +static bool delay_calibrated; + +int read_current_timer(unsigned long *timer_val) +{ + if (!delay_timer) + return -ENXIO; + + *timer_val = delay_timer->read_current_timer(); + return 0; +} + static void __timer_delay(unsigned long cycles) { cycles_t start = get_cycles(); @@ -55,17 +66,24 @@ static void __timer_udelay(unsigned long usecs) __timer_const_udelay(usecs * UDELAY_MULT); } -void __init init_current_timer_delay(unsigned long freq) +void __init register_current_timer_delay(const struct delay_timer *timer) { - pr_info("Switching to timer-based delay loop\n"); - lpj_fine = freq / HZ; - arm_delay_ops.delay = __timer_delay; - arm_delay_ops.const_udelay = __timer_const_udelay; - arm_delay_ops.udelay = __timer_udelay; + if (!delay_calibrated) { + pr_info("Switching to timer-based delay loop\n"); + delay_timer = timer; + lpj_fine = timer->freq / HZ; + loops_per_jiffy = lpj_fine; + arm_delay_ops.delay = __timer_delay; + arm_delay_ops.const_udelay = __timer_const_udelay; + arm_delay_ops.udelay = __timer_udelay; + delay_calibrated = true; + } else { + pr_info("Ignoring duplicate/late registration of read_current_timer delay\n"); + } } unsigned long __cpuinit calibrate_delay_is_known(void) { + delay_calibrated = true; return lpj_fine; } -#endif diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 11093a7c3e32289e95a8c100cc01ef2bbb8d7101..9b06bb41fca659b9bbfc2f996e703ce2b8c315aa 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -16,8 +16,9 @@ * __get_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * Outputs: r0 is the error code - * r2, r3 contains the zero-extended value + * r2 contains the zero-extended value * lr corrupted * * No other registers must be altered. (see @@ -27,33 +28,39 @@ * Note also that it is intended that __get_user_bad is not global. */ #include +#include #include #include ENTRY(__get_user_1) + check_uaccess r0, 1, r1, r2, __get_user_bad 1: TUSER(ldrb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_1) ENTRY(__get_user_2) -#ifdef CONFIG_THUMB2_KERNEL -2: TUSER(ldrb) r2, [r0] -3: TUSER(ldrb) r3, [r0, #1] + check_uaccess r0, 2, r1, r2, __get_user_bad +#ifdef CONFIG_CPU_USE_DOMAINS +rb .req ip +2: ldrbt r2, [r0], #1 +3: ldrbt rb, [r0], #0 #else -2: TUSER(ldrb) r2, [r0], #1 -3: TUSER(ldrb) r3, [r0] +rb .req r0 +2: ldrb r2, [r0] +3: ldrb rb, [r0, #1] #endif #ifndef __ARMEB__ - orr r2, r2, r3, lsl #8 + orr r2, r2, rb, lsl #8 #else - orr r2, r3, r2, lsl #8 + orr r2, rb, r2, lsl #8 #endif mov r0, #0 mov pc, lr ENDPROC(__get_user_2) ENTRY(__get_user_4) + check_uaccess r0, 4, r1, r2, __get_user_bad 4: TUSER(ldr) r2, [r0] mov r0, #0 mov pc, lr diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S new file mode 100644 index 0000000000000000000000000000000000000000..88487c8c4f2353f7f512bd6dbecb019e93e72004 --- /dev/null +++ b/arch/arm/lib/io-readsw-armv3.S @@ -0,0 +1,106 @@ +/* + * linux/arch/arm/lib/io-readsw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + +.Linsw_bad_alignment: + adr r0, .Linsw_bad_align_msg + mov r2, lr + b panic +.Linsw_bad_align_msg: + .asciz "insw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Linsw_align: tst r1, #1 + bne .Linsw_bad_alignment + + ldr r3, [r0] + strb r3, [r1], #1 + mov r3, r3, lsr #8 + strb r3, [r1], #1 + + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_readsw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Linsw_align + +.Linsw_aligned: mov ip, #0xff + orr ip, ip, ip, lsl #8 + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_insw_8 + +.Linsw_8_lp: ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + ldr r5, [r0] + and r5, r5, ip + ldr r6, [r0] + orr r5, r5, r6, lsl #16 + + ldr r6, [r0] + and r6, r6, ip + ldr lr, [r0] + orr r6, r6, lr, lsl #16 + + stmia r1!, {r3 - r6} + + subs r2, r2, #8 + bpl .Linsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_insw_8: tst r2, #4 + beq .Lno_insw_4 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + ldr r4, [r0] + and r4, r4, ip + ldr r5, [r0] + orr r4, r4, r5, lsl #16 + + stmia r1!, {r3, r4} + +.Lno_insw_4: tst r2, #2 + beq .Lno_insw_2 + + ldr r3, [r0] + and r3, r3, ip + ldr r4, [r0] + orr r3, r3, r4, lsl #16 + + str r3, [r1], #4 + +.Lno_insw_2: tst r2, #1 + ldrne r3, [r0] + strneb r3, [r1], #1 + movne r3, r3, lsr #8 + strneb r3, [r1] + + ldmfd sp!, {r4, r5, r6, pc} + + diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S new file mode 100644 index 0000000000000000000000000000000000000000..49b800419e32ca6b6dbed9c27d0ee4e3960b639b --- /dev/null +++ b/arch/arm/lib/io-writesw-armv3.S @@ -0,0 +1,126 @@ +/* + * linux/arch/arm/lib/io-writesw-armv3.S + * + * Copyright (C) 1995-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include +#include + +.Loutsw_bad_alignment: + adr r0, .Loutsw_bad_align_msg + mov r2, lr + b panic +.Loutsw_bad_align_msg: + .asciz "outsw: bad buffer alignment (0x%p, lr=0x%08lX)\n" + .align + +.Loutsw_align: tst r1, #1 + bne .Loutsw_bad_alignment + + add r1, r1, #2 + + ldr r3, [r1, #-4] + mov r3, r3, lsr #16 + orr r3, r3, r3, lsl #16 + str r3, [r0] + subs r2, r2, #1 + moveq pc, lr + +ENTRY(__raw_writesw) + teq r2, #0 @ do we have to check for the zero len? + moveq pc, lr + tst r1, #3 + bne .Loutsw_align + + stmfd sp!, {r4, r5, r6, lr} + + subs r2, r2, #8 + bmi .Lno_outsw_8 + +.Loutsw_8_lp: ldmia r1!, {r3, r4, r5, r6} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r5, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r5, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r6, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r6, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + subs r2, r2, #8 + bpl .Loutsw_8_lp + + tst r2, #7 + ldmeqfd sp!, {r4, r5, r6, pc} + +.Lno_outsw_8: tst r2, #4 + beq .Lno_outsw_4 + + ldmia r1!, {r3, r4} + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + + mov ip, r4, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r4, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_4: tst r2, #2 + beq .Lno_outsw_2 + + ldr r3, [r1], #4 + + mov ip, r3, lsl #16 + orr ip, ip, ip, lsr #16 + str ip, [r0] + + mov ip, r3, lsr #16 + orr ip, ip, ip, lsl #16 + str ip, [r0] + +.Lno_outsw_2: tst r2, #1 + + ldrne r3, [r1] + + movne ip, r3, lsl #16 + orrne ip, ip, ip, lsr #16 + strne ip, [r0] + + ldmfd sp!, {r4, r5, r6, pc} diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 7db25990c589f3d98554d9aee47cf7b5c3c486fd..3d73dcb959b0da83bc8affe3a781b7fcbdb17752 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -16,6 +16,7 @@ * __put_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * r2, r3 contains the value * Outputs: r0 is the error code * lr corrupted @@ -27,16 +28,19 @@ * Note also that it is intended that __put_user_bad is not global. */ #include +#include #include #include ENTRY(__put_user_1) + check_uaccess r0, 1, r1, ip, __put_user_bad 1: TUSER(strb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_1) ENTRY(__put_user_2) + check_uaccess r0, 2, r1, ip, __put_user_bad mov ip, r2, lsr #8 #ifdef CONFIG_THUMB2_KERNEL #ifndef __ARMEB__ @@ -60,12 +64,14 @@ ENTRY(__put_user_2) ENDPROC(__put_user_2) ENTRY(__put_user_4) + check_uaccess r0, 4, r1, ip, __put_user_bad 4: TUSER(str) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_4) ENTRY(__put_user_8) + check_uaccess r0, 8, r1, ip, __put_user_bad #ifdef CONFIG_THUMB2_KERNEL 5: TUSER(str) r2, [r0] 6: TUSER(str) r3, [r0, #4] diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S new file mode 100644 index 0000000000000000000000000000000000000000..5c908b1cb8ed5db3eeabfb89f7f659f99d2d6f76 --- /dev/null +++ b/arch/arm/lib/uaccess.S @@ -0,0 +1,564 @@ +/* + * linux/arch/arm/lib/uaccess.S + * + * Copyright (C) 1995, 1996,1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Routines to block copy data to/from user memory + * These are highly optimised both for the 4k page size + * and for various alignments. + */ +#include +#include +#include +#include + + .text + +#define PAGE_SHIFT 12 + +/* Prototype: int __copy_to_user(void *to, const char *from, size_t n) + * Purpose : copy a block to user memory from kernel memory + * Params : to - user memory + * : from - kernel memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ + +.Lc2u_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + sub r2, r2, ip + b .Lc2u_dest_aligned + +ENTRY(__copy_to_user) + stmfd sp!, {r2, r4 - r7, lr} + cmp r2, #4 + blt .Lc2u_not_enough + ands ip, r0, #3 + bne .Lc2u_dest_not_aligned +.Lc2u_dest_aligned: + + ands ip, r1, #3 + bne .Lc2u_src_not_aligned +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lc2u_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_0nowords + ldr r3, [r1], #4 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lc2u_0rem8lp + +.Lc2u_0cpy8lp: ldmia r1!, {r3 - r6} + stmia r0!, {r3 - r6} @ Shouldnt fault + ldmia r1!, {r3 - r6} + subs ip, ip, #32 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_0cpy8lp + +.Lc2u_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} + stmgeia r0!, {r3 - r6} @ Shouldnt fault + tst ip, #8 + ldmneia r1!, {r3 - r4} + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + ldrne r3, [r1], #4 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_0fupi +.Lc2u_0nowords: teq ip, #0 + beq .Lc2u_finished +.Lc2u_nowords: cmp ip, #2 + ldrb r3, [r1], #1 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #1 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_not_enough: + movs ip, r2 + bne .Lc2u_nowords +.Lc2u_finished: mov r0, #0 + ldmfd sp!, {r2, r4 - r7, pc} + +.Lc2u_src_not_aligned: + bic r1, r1, #3 + ldr r7, [r1], #4 + cmp ip, #2 + bgt .Lc2u_3fupi + beq .Lc2u_2fupi +.Lc2u_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_1nowords + mov r3, r7, pull #8 + ldr r7, [r1], #4 + orr r3, r3, r7, push #24 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_1rem8lp + +.Lc2u_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_1cpy8lp + +.Lc2u_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #8 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #24 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_1fupi +.Lc2u_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_2 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + movgt r3, r7, get_byte_3 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_2nowords + mov r3, r7, pull #16 + ldr r7, [r1], #4 + orr r3, r3, r7, push #16 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_2rem8lp + +.Lc2u_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_2cpy8lp + +.Lc2u_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #16 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #16 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_2fupi +.Lc2u_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + movge r3, r7, get_byte_3 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished + +.Lc2u_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lc2u_3nowords + mov r3, r7, pull #24 + ldr r7, [r1], #4 + orr r3, r3, r7, push #8 +USER( TUSER( str) r3, [r0], #4) @ May fault + mov ip, r0, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lc2u_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lc2u_3rem8lp + +.Lc2u_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} + subs ip, ip, #16 + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} @ Shouldnt fault + bpl .Lc2u_3cpy8lp + +.Lc2u_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} @ Shouldnt fault + tst ip, #4 + movne r3, r7, pull #24 + ldrne r7, [r1], #4 + orrne r3, r3, r7, push #8 + TUSER( strne) r3, [r0], #4 @ Shouldnt fault + ands ip, ip, #3 + beq .Lc2u_3fupi +.Lc2u_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lc2u_finished + cmp ip, #2 +USER( TUSER( strb) r3, [r0], #1) @ May fault + ldrgeb r3, [r1], #1 +USER( TUSER( strgeb) r3, [r0], #1) @ May fault + ldrgtb r3, [r1], #0 +USER( TUSER( strgtb) r3, [r0], #1) @ May fault + b .Lc2u_finished +ENDPROC(__copy_to_user) + + .pushsection .fixup,"ax" + .align 0 +9001: ldmfd sp!, {r0, r4 - r7, pc} + .popsection + +/* Prototype: unsigned long __copy_from_user(void *to,const void *from,unsigned long n); + * Purpose : copy a block from user memory to kernel memory + * Params : to - kernel memory + * : from - user memory + * : n - number of bytes to copy + * Returns : Number of bytes NOT copied. + */ +.Lcfu_dest_not_aligned: + rsb ip, ip, #4 + cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + sub r2, r2, ip + b .Lcfu_dest_aligned + +ENTRY(__copy_from_user) + stmfd sp!, {r0, r2, r4 - r7, lr} + cmp r2, #4 + blt .Lcfu_not_enough + ands ip, r0, #3 + bne .Lcfu_dest_not_aligned +.Lcfu_dest_aligned: + ands ip, r1, #3 + bne .Lcfu_src_not_aligned + +/* + * Seeing as there has to be at least 8 bytes to copy, we can + * copy one word, and force a user-mode page fault... + */ + +.Lcfu_0fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_0nowords +USER( TUSER( ldr) r3, [r1], #4) + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_0fupi +/* + * ip = max no. of bytes to copy before needing another "strt" insn + */ + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #32 + blt .Lcfu_0rem8lp + +.Lcfu_0cpy8lp: ldmia r1!, {r3 - r6} @ Shouldnt fault + stmia r0!, {r3 - r6} + ldmia r1!, {r3 - r6} @ Shouldnt fault + subs ip, ip, #32 + stmia r0!, {r3 - r6} + bpl .Lcfu_0cpy8lp + +.Lcfu_0rem8lp: cmn ip, #16 + ldmgeia r1!, {r3 - r6} @ Shouldnt fault + stmgeia r0!, {r3 - r6} + tst ip, #8 + ldmneia r1!, {r3 - r4} @ Shouldnt fault + stmneia r0!, {r3 - r4} + tst ip, #4 + TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_0fupi +.Lcfu_0nowords: teq ip, #0 + beq .Lcfu_finished +.Lcfu_nowords: cmp ip, #2 +USER( TUSER( ldrb) r3, [r1], #1) @ May fault + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_not_enough: + movs ip, r2 + bne .Lcfu_nowords +.Lcfu_finished: mov r0, #0 + add sp, sp, #8 + ldmfd sp!, {r4 - r7, pc} + +.Lcfu_src_not_aligned: + bic r1, r1, #3 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + cmp ip, #2 + bgt .Lcfu_3fupi + beq .Lcfu_2fupi +.Lcfu_1fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_1nowords + mov r3, r7, pull #8 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #24 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_1fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_1rem8lp + +.Lcfu_1cpy8lp: mov r3, r7, pull #8 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #24 + mov r4, r4, pull #8 + orr r4, r4, r5, push #24 + mov r5, r5, pull #8 + orr r5, r5, r6, push #24 + mov r6, r6, pull #8 + orr r6, r6, r7, push #24 + stmia r0!, {r3 - r6} + bpl .Lcfu_1cpy8lp + +.Lcfu_1rem8lp: tst ip, #8 + movne r3, r7, pull #8 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #24 + movne r4, r4, pull #8 + orrne r4, r4, r7, push #24 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #8 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #24 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_1fupi +.Lcfu_1nowords: mov r3, r7, get_byte_1 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_2 + strgeb r3, [r0], #1 + movgt r3, r7, get_byte_3 + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_2fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_2nowords + mov r3, r7, pull #16 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #16 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_2fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_2rem8lp + + +.Lcfu_2cpy8lp: mov r3, r7, pull #16 + ldmia r1!, {r4 - r7} @ Shouldnt fault + subs ip, ip, #16 + orr r3, r3, r4, push #16 + mov r4, r4, pull #16 + orr r4, r4, r5, push #16 + mov r5, r5, pull #16 + orr r5, r5, r6, push #16 + mov r6, r6, pull #16 + orr r6, r6, r7, push #16 + stmia r0!, {r3 - r6} + bpl .Lcfu_2cpy8lp + +.Lcfu_2rem8lp: tst ip, #8 + movne r3, r7, pull #16 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #16 + movne r4, r4, pull #16 + orrne r4, r4, r7, push #16 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #16 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #16 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_2fupi +.Lcfu_2nowords: mov r3, r7, get_byte_2 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 + movge r3, r7, get_byte_3 + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished + +.Lcfu_3fupi: subs r2, r2, #4 + addmi ip, r2, #4 + bmi .Lcfu_3nowords + mov r3, r7, pull #24 +USER( TUSER( ldr) r7, [r1], #4) @ May fault + orr r3, r3, r7, push #8 + str r3, [r0], #4 + mov ip, r1, lsl #32 - PAGE_SHIFT + rsb ip, ip, #0 + movs ip, ip, lsr #32 - PAGE_SHIFT + beq .Lcfu_3fupi + cmp r2, ip + movlt ip, r2 + sub r2, r2, ip + subs ip, ip, #16 + blt .Lcfu_3rem8lp + +.Lcfu_3cpy8lp: mov r3, r7, pull #24 + ldmia r1!, {r4 - r7} @ Shouldnt fault + orr r3, r3, r4, push #8 + mov r4, r4, pull #24 + orr r4, r4, r5, push #8 + mov r5, r5, pull #24 + orr r5, r5, r6, push #8 + mov r6, r6, pull #24 + orr r6, r6, r7, push #8 + stmia r0!, {r3 - r6} + subs ip, ip, #16 + bpl .Lcfu_3cpy8lp + +.Lcfu_3rem8lp: tst ip, #8 + movne r3, r7, pull #24 + ldmneia r1!, {r4, r7} @ Shouldnt fault + orrne r3, r3, r4, push #8 + movne r4, r4, pull #24 + orrne r4, r4, r7, push #8 + stmneia r0!, {r3 - r4} + tst ip, #4 + movne r3, r7, pull #24 +USER( TUSER( ldrne) r7, [r1], #4) @ May fault + orrne r3, r3, r7, push #8 + strne r3, [r0], #4 + ands ip, ip, #3 + beq .Lcfu_3fupi +.Lcfu_3nowords: mov r3, r7, get_byte_3 + teq ip, #0 + beq .Lcfu_finished + cmp ip, #2 + strb r3, [r0], #1 +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault + strgeb r3, [r0], #1 +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault + strgtb r3, [r0], #1 + b .Lcfu_finished +ENDPROC(__copy_from_user) + + .pushsection .fixup,"ax" + .align 0 + /* + * We took an exception. r0 contains a pointer to + * the byte not copied. + */ +9001: ldr r2, [sp], #4 @ void *to + sub r2, r0, r2 @ bytes copied + ldr r1, [sp], #4 @ unsigned long count + subs r4, r1, r2 @ bytes left to copy + movne r1, r4 + blne __memzero + mov r0, r4 + ldmfd sp!, {r4 - r7, pc} + .popsection + diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 30bb7332e30b99a8d45a7c20ed10d9f26ce4e9f2..5309f9b6aabceedca1fe5da89d94b00226013ac8 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -12,27 +12,3 @@ else params_phys-y := 0x20000100 initrd_phys-y := 0x20410000 endif - -# Keep dtb files sorted alphabetically for each SoC -# sam9260 -dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb -# sam9263 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb -# sam9g20 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb -dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb -# sam9g45 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb -# sam9n12 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9n12ek.dtb -# sam9x5 -dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 01fb7325fecce0ef9a015835ff846655b3b4af11..9ac427a702da3d5cc25f380ededa12dcbcd73ed9 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -294,9 +294,9 @@ void __init at91_add_device_cf(struct at91_cf_data *data) {} * MMC / SD * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; +static struct mci_platform_data mmc_data; static struct resource mmc_resources[] = { [0] = { @@ -312,7 +312,7 @@ static struct resource mmc_resources[] = { }; static struct platform_device at91rm9200_mmc_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = -1, .dev = { .dma_mask = &mmc_dmamask, @@ -323,53 +323,69 @@ static struct platform_device at91rm9200_mmc_device = { .num_resources = ARRAY_SIZE(mmc_resources), }; -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) { + unsigned int i; + unsigned int slot_count = 0; + if (!data) return; - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PA27, 0); + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { - if (data->slot_b) { - /* CMD */ - at91_set_B_periph(AT91_PIN_PA8, 1); + if (!data->slot[i].bus_width) + continue; - /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA9, 1); - if (data->wire4) { - at91_set_B_periph(AT91_PIN_PA10, 1); - at91_set_B_periph(AT91_PIN_PA11, 1); - at91_set_B_periph(AT91_PIN_PA12, 1); + /* input/irq */ + if (gpio_is_valid(data->slot[i].detect_pin)) { + at91_set_gpio_input(data->slot[i].detect_pin, 1); + at91_set_deglitch(data->slot[i].detect_pin, 1); } - } else { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA28, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA29, 1); - if (data->wire4) { - at91_set_B_periph(AT91_PIN_PB3, 1); - at91_set_B_periph(AT91_PIN_PB4, 1); - at91_set_B_periph(AT91_PIN_PB5, 1); + if (gpio_is_valid(data->slot[i].wp_pin)) + at91_set_gpio_input(data->slot[i].wp_pin, 1); + + switch (i) { + case 0: /* slot A */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA28, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA29, 1); + if (data->slot[i].bus_width == 4) { + at91_set_B_periph(AT91_PIN_PB3, 1); + at91_set_B_periph(AT91_PIN_PB4, 1); + at91_set_B_periph(AT91_PIN_PB5, 1); + } + slot_count++; + break; + case 1: /* slot B */ + /* CMD */ + at91_set_B_periph(AT91_PIN_PA8, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_B_periph(AT91_PIN_PA9, 1); + if (data->slot[i].bus_width == 4) { + at91_set_B_periph(AT91_PIN_PA10, 1); + at91_set_B_periph(AT91_PIN_PA11, 1); + at91_set_B_periph(AT91_PIN_PA12, 1); + } + slot_count++; + break; + default: + printk(KERN_ERR + "AT91: SD/MMC slot %d not available\n", i); + break; + } + if (slot_count) { + /* CLK */ + at91_set_A_periph(AT91_PIN_PA27, 0); + + mmc_data = *data; + platform_device_register(&at91rm9200_mmc_device); } } - mmc_data = *data; - platform_device_register(&at91rm9200_mmc_device); } #else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} #endif diff --git a/arch/arm/mach-at91/at91rm9200_time.c b/arch/arm/mach-at91/at91rm9200_time.c index 104ca40d8d18908cb463e7ae1cd56790c926d971..aaa443b48c91f121e2f698792fb94bb4d6e2afa6 100644 --- a/arch/arm/mach-at91/at91rm9200_time.c +++ b/arch/arm/mach-at91/at91rm9200_time.c @@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void) at91_st_read(AT91_ST_SR); /* Make IRQs happen for the system timer */ - setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq); + setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq); /* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used * directly for the clocksource and all clockevents, after adjusting diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 7b9c2ba396edb854cfd78ddef676250a751e60bc..af50ff3281c7153b46ec054d3aa2c14488ea2fbb 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -208,93 +208,11 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {} #endif -/* -------------------------------------------------------------------- - * MMC / SD - * -------------------------------------------------------------------- */ - -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) -static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; - -static struct resource mmc_resources[] = { - [0] = { - .start = AT91SAM9260_BASE_MCI, - .end = AT91SAM9260_BASE_MCI + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, - .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device at91sam9260_mmc_device = { - .name = "at91_mci", - .id = -1, - .dev = { - .dma_mask = &mmc_dmamask, - .coherent_dma_mask = DMA_BIT_MASK(32), - .platform_data = &mmc_data, - }, - .resource = mmc_resources, - .num_resources = ARRAY_SIZE(mmc_resources), -}; - -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) -{ - if (!data) - return; - - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PA8, 0); - - if (data->slot_b) { - /* CMD */ - at91_set_B_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_B_periph(AT91_PIN_PA5, 1); - at91_set_B_periph(AT91_PIN_PA4, 1); - at91_set_B_periph(AT91_PIN_PA3, 1); - } - } else { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA7, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA6, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA9, 1); - at91_set_A_periph(AT91_PIN_PA10, 1); - at91_set_A_periph(AT91_PIN_PA11, 1); - } - } - - mmc_data = *data; - platform_device_register(&at91sam9260_mmc_device); -} -#else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} -#endif - /* -------------------------------------------------------------------- * MMC / SD Slot for Atmel MCI Driver * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); static struct mci_platform_data mmc_data; @@ -726,6 +644,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, }, }; @@ -744,10 +664,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9260_rtt_device.num_resources = 2; + at91sam9260_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9260_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 8df5c1bdff92f1d1194fa9d64da61e2aa9bc2598..11e9fa835cde2e296f5c585a43fc8f1aecf48cff 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -137,9 +137,9 @@ void __init at91_add_device_udc(struct at91_udc_data *data) {} * MMC / SD * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; +static struct mci_platform_data mmc_data; static struct resource mmc_resources[] = { [0] = { @@ -155,7 +155,7 @@ static struct resource mmc_resources[] = { }; static struct platform_device at91sam9261_mmc_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = -1, .dev = { .dma_mask = &mmc_dmamask, @@ -166,40 +166,40 @@ static struct platform_device at91sam9261_mmc_device = { .num_resources = ARRAY_SIZE(mmc_resources), }; -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) { if (!data) return; - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_B_periph(AT91_PIN_PA2, 0); - - /* CMD */ - at91_set_B_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_B_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_B_periph(AT91_PIN_PA4, 1); - at91_set_B_periph(AT91_PIN_PA5, 1); - at91_set_B_periph(AT91_PIN_PA6, 1); - } + if (data->slot[0].bus_width) { + /* input/irq */ + if (gpio_is_valid(data->slot[0].detect_pin)) { + at91_set_gpio_input(data->slot[0].detect_pin, 1); + at91_set_deglitch(data->slot[0].detect_pin, 1); + } + if (gpio_is_valid(data->slot[0].wp_pin)) + at91_set_gpio_input(data->slot[0].wp_pin, 1); + + /* CLK */ + at91_set_B_periph(AT91_PIN_PA2, 0); - mmc_data = *data; - platform_device_register(&at91sam9261_mmc_device); + /* CMD */ + at91_set_B_periph(AT91_PIN_PA1, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_B_periph(AT91_PIN_PA0, 1); + if (data->slot[0].bus_width == 4) { + at91_set_B_periph(AT91_PIN_PA4, 1); + at91_set_B_periph(AT91_PIN_PA5, 1); + at91_set_B_periph(AT91_PIN_PA6, 1); + } + + mmc_data = *data; + platform_device_register(&at91sam9261_mmc_device); + } } #else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} #endif @@ -609,6 +609,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -626,10 +628,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9261_rtt_device.num_resources = 2; + at91sam9261_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9261_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 84b38105231e91a52df082f3828f2042c1178201..144ef5de51b6beaf3b989801277aabe94aefe97b 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -188,8 +188,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_ID("hclk", &macb_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.0", &mmc0_clk), - CLKDEV_CON_DEV_ID("mci_clk", "at91_mci.1", &mmc1_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk), + CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index eb6bbf86fb9f597cc7424a52b459bb04ecff2326..7c0898fe20fa5850d174f69b2d43f48c645a6a30 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -218,9 +218,9 @@ void __init at91_add_device_eth(struct macb_platform_data *data) {} * MMC / SD * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc0_data, mmc1_data; +static struct mci_platform_data mmc0_data, mmc1_data; static struct resource mmc0_resources[] = { [0] = { @@ -236,7 +236,7 @@ static struct resource mmc0_resources[] = { }; static struct platform_device at91sam9263_mmc0_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = 0, .dev = { .dma_mask = &mmc_dmamask, @@ -261,7 +261,7 @@ static struct resource mmc1_resources[] = { }; static struct platform_device at91sam9263_mmc1_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = 1, .dev = { .dma_mask = &mmc_dmamask, @@ -272,85 +272,110 @@ static struct platform_device at91sam9263_mmc1_device = { .num_resources = ARRAY_SIZE(mmc1_resources), }; -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) { + unsigned int i; + unsigned int slot_count = 0; + if (!data) return; - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); + for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { - if (mmc_id == 0) { /* MCI0 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA12, 0); + if (!data->slot[i].bus_width) + continue; - if (data->slot_b) { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA16, 1); + /* input/irq */ + if (gpio_is_valid(data->slot[i].detect_pin)) { + at91_set_gpio_input(data->slot[i].detect_pin, + 1); + at91_set_deglitch(data->slot[i].detect_pin, + 1); + } + if (gpio_is_valid(data->slot[i].wp_pin)) + at91_set_gpio_input(data->slot[i].wp_pin, 1); + + if (mmc_id == 0) { /* MCI0 */ + switch (i) { + case 0: /* slot A */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA1, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA0, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA3, 1); + at91_set_A_periph(AT91_PIN_PA4, 1); + at91_set_A_periph(AT91_PIN_PA5, 1); + } + slot_count++; + break; + case 1: /* slot B */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA16, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA17, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA18, 1); + at91_set_A_periph(AT91_PIN_PA19, 1); + at91_set_A_periph(AT91_PIN_PA20, 1); + } + slot_count++; + break; + default: + printk(KERN_ERR + "AT91: SD/MMC slot %d not available\n", i); + break; + } + if (slot_count) { + /* CLK */ + at91_set_A_periph(AT91_PIN_PA12, 0); - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA17, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA18, 1); - at91_set_A_periph(AT91_PIN_PA19, 1); - at91_set_A_periph(AT91_PIN_PA20, 1); + mmc0_data = *data; + platform_device_register(&at91sam9263_mmc0_device); } - } else { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); + } else if (mmc_id == 1) { /* MCI1 */ + switch (i) { + case 0: /* slot A */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA7, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA8, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA9, 1); + at91_set_A_periph(AT91_PIN_PA10, 1); + at91_set_A_periph(AT91_PIN_PA11, 1); + } + slot_count++; + break; + case 1: /* slot B */ + /* CMD */ + at91_set_A_periph(AT91_PIN_PA21, 1); + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA22, 1); + if (data->slot[i].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA23, 1); + at91_set_A_periph(AT91_PIN_PA24, 1); + at91_set_A_periph(AT91_PIN_PA25, 1); + } + slot_count++; + break; + default: + printk(KERN_ERR + "AT91: SD/MMC slot %d not available\n", i); + break; } - } + if (slot_count) { + /* CLK */ + at91_set_A_periph(AT91_PIN_PA6, 0); - mmc0_data = *data; - platform_device_register(&at91sam9263_mmc0_device); - } else { /* MCI1 */ - /* CLK */ - at91_set_A_periph(AT91_PIN_PA6, 0); - - if (data->slot_b) { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA21, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA22, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA23, 1); - at91_set_A_periph(AT91_PIN_PA24, 1); - at91_set_A_periph(AT91_PIN_PA25, 1); - } - } else { - /* CMD */ - at91_set_A_periph(AT91_PIN_PA7, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA8, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA9, 1); - at91_set_A_periph(AT91_PIN_PA10, 1); - at91_set_A_periph(AT91_PIN_PA11, 1); + mmc1_data = *data; + platform_device_register(&at91sam9263_mmc1_device); } } - - mmc1_data = *data; - platform_device_register(&at91sam9263_mmc1_device); } } #else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} #endif /* -------------------------------------------------------------------- @@ -990,6 +1015,8 @@ static struct resource rtt0_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1006,6 +1033,8 @@ static struct resource rtt1_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1027,14 +1056,14 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed only for the chosen RTT: * GPBR will serve as the storage for RTC time offset */ - at91sam9263_rtt0_device.num_resources = 2; + at91sam9263_rtt0_device.num_resources = 3; at91sam9263_rtt1_device.num_resources = 1; pdev = &at91sam9263_rtt0_device; r = rtt0_resources; break; case 1: at91sam9263_rtt0_device.num_resources = 1; - at91sam9263_rtt1_device.num_resources = 2; + at91sam9263_rtt1_device.num_resources = 3; pdev = &at91sam9263_rtt1_device; r = rtt1_resources; break; @@ -1047,6 +1076,8 @@ static void __init at91_add_device_rtt_rtc(void) pdev->name = "rtc-at91sam9"; r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; r[1].end = r[1].start + 3; + r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 06073996a38241d50fb1595c52017a50567d7e44..e4c3b3709204256297f6887ed89ab74847159841 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -31,7 +31,7 @@ #include #include #include -#include +#include #include #include @@ -1293,6 +1293,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -1310,10 +1312,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9g45_rtt_device.num_resources = 2; + at91sam9g45_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9G45_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index f09fff932172ffec238c10714331d7c8970a53e1..deafea0e493dd41c9a20e52acab75baca1badbf0 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -22,7 +22,7 @@ #include #include #include -#include +#include #include "generic.h" @@ -161,9 +161,9 @@ void __init at91_add_device_usba(struct usba_platform_data *data) {} * MMC / SD * -------------------------------------------------------------------- */ -#if defined(CONFIG_MMC_AT91) || defined(CONFIG_MMC_AT91_MODULE) +#if IS_ENABLED(CONFIG_MMC_ATMELMCI) static u64 mmc_dmamask = DMA_BIT_MASK(32); -static struct at91_mmc_data mmc_data; +static struct mci_platform_data mmc_data; static struct resource mmc_resources[] = { [0] = { @@ -179,7 +179,7 @@ static struct resource mmc_resources[] = { }; static struct platform_device at91sam9rl_mmc_device = { - .name = "at91_mci", + .name = "atmel_mci", .id = -1, .dev = { .dma_mask = &mmc_dmamask, @@ -190,40 +190,40 @@ static struct platform_device at91sam9rl_mmc_device = { .num_resources = ARRAY_SIZE(mmc_resources), }; -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) { if (!data) return; - /* input/irq */ - if (gpio_is_valid(data->det_pin)) { - at91_set_gpio_input(data->det_pin, 1); - at91_set_deglitch(data->det_pin, 1); - } - if (gpio_is_valid(data->wp_pin)) - at91_set_gpio_input(data->wp_pin, 1); - if (gpio_is_valid(data->vcc_pin)) - at91_set_gpio_output(data->vcc_pin, 0); - - /* CLK */ - at91_set_A_periph(AT91_PIN_PA2, 0); - - /* CMD */ - at91_set_A_periph(AT91_PIN_PA1, 1); - - /* DAT0, maybe DAT1..DAT3 */ - at91_set_A_periph(AT91_PIN_PA0, 1); - if (data->wire4) { - at91_set_A_periph(AT91_PIN_PA3, 1); - at91_set_A_periph(AT91_PIN_PA4, 1); - at91_set_A_periph(AT91_PIN_PA5, 1); + if (data->slot[0].bus_width) { + /* input/irq */ + if (gpio_is_valid(data->slot[0].detect_pin)) { + at91_set_gpio_input(data->slot[0].detect_pin, 1); + at91_set_deglitch(data->slot[0].detect_pin, 1); + } + if (gpio_is_valid(data->slot[0].wp_pin)) + at91_set_gpio_input(data->slot[0].wp_pin, 1); + + /* CLK */ + at91_set_A_periph(AT91_PIN_PA2, 0); + + /* CMD */ + at91_set_A_periph(AT91_PIN_PA1, 1); + + /* DAT0, maybe DAT1..DAT3 */ + at91_set_A_periph(AT91_PIN_PA0, 1); + if (data->slot[0].bus_width == 4) { + at91_set_A_periph(AT91_PIN_PA3, 1); + at91_set_A_periph(AT91_PIN_PA4, 1); + at91_set_A_periph(AT91_PIN_PA5, 1); + } + + mmc_data = *data; + platform_device_register(&at91sam9rl_mmc_device); } - - mmc_data = *data; - platform_device_register(&at91sam9rl_mmc_device); } #else -void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {} +void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {} #endif @@ -688,6 +688,8 @@ static struct resource rtt_resources[] = { .flags = IORESOURCE_MEM, }, { .flags = IORESOURCE_MEM, + }, { + .flags = IORESOURCE_IRQ, } }; @@ -705,10 +707,12 @@ static void __init at91_add_device_rtt_rtc(void) * The second resource is needed: * GPBR will serve as the storage for RTC time offset */ - at91sam9rl_rtt_device.num_resources = 2; + at91sam9rl_rtt_device.num_resources = 3; rtt_resources[1].start = AT91SAM9RL_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR; rtt_resources[1].end = rtt_resources[1].start + 3; + rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS; + rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS; } #else static void __init at91_add_device_rtt_rtc(void) diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 46090e642d8eb00b7fe93e05b70c9ea62dc9c8c3..6bd7300a2bc507855f28153e5871a4fcb6c4d5ed 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -47,7 +47,7 @@ static void at91x40_idle(void) * Disable the processor clock. The processor will be automatically * re-enabled by an interrupt or by a reset. */ - __raw_writel(AT91_PS_CR_CPU, AT91_PS_CR); + __raw_writel(AT91_PS_CR_CPU, AT91_IO_P2V(AT91_PS_CR)); cpu_do_idle(); } diff --git a/arch/arm/mach-at91/at91x40_time.c b/arch/arm/mach-at91/at91x40_time.c index 6ca680a1d5d112bb32cfa347c08c845f4d24ff6f..ee06d7bcdf76b79daa8feb5e1f5f9929a9e22f1c 100644 --- a/arch/arm/mach-at91/at91x40_time.c +++ b/arch/arm/mach-at91/at91x40_time.c @@ -29,10 +29,10 @@ #include #define at91_tc_read(field) \ - __raw_readl(AT91_TC + field) + __raw_readl(AT91_IO_P2V(AT91_TC) + field) #define at91_tc_write(field, value) \ - __raw_writel(value, AT91_TC + field); + __raw_writel(value, AT91_IO_P2V(AT91_TC) + field); /* * 3 counter/timer units present. diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index de7be193181795cb210e5865df30e6fb8babb0d8..93a832f7023230a8fba9f9ed8eb740fc89736c1b 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -133,12 +133,12 @@ static struct atmel_nand_data __initdata afeb9260_nand_data = { /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata afeb9260_mmc_data = { - .det_pin = AT91_PIN_PC9, - .wp_pin = AT91_PIN_PC4, - .slot_b = 1, - .wire4 = 1, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata afeb9260_mci0_data = { + .slot[1] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PC9, + .wp_pin = AT91_PIN_PC4, + }, }; @@ -199,7 +199,7 @@ static void __init afeb9260_board_init(void) at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */ at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */ /* MMC */ - at91_add_device_mmc(0, &afeb9260_mmc_data); + at91_add_device_mci(0, &afeb9260_mci0_data); /* I2C */ at91_add_device_i2c(afeb9260_i2c_devices, ARRAY_SIZE(afeb9260_i2c_devices)); diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index a5b002f32a6162e98e6ae5335fcdbec2eb911332..71d8f362a1d588ad017c43c0ccf4a3a93798b208 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -71,12 +71,12 @@ static struct at91_udc_data __initdata carmeva_udc_data = { // .vcc_pin = -EINVAL, // }; -static struct at91_mmc_data __initdata carmeva_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = AT91_PIN_PB10, - .wp_pin = AT91_PIN_PC14, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata carmeva_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB10, + .wp_pin = AT91_PIN_PC14, + }, }; static struct spi_board_info carmeva_spi_devices[] = { @@ -150,7 +150,7 @@ static void __init carmeva_board_init(void) /* Compact Flash */ // at91_add_device_cf(&carmeva_cf_data); /* MMC */ - at91_add_device_mmc(0, &carmeva_mmc_data); + at91_add_device_mci(0, &carmeva_mci0_data); /* LEDs */ at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds)); } diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index ecbc13b594de05ed2877d27eab08b91db16cf475..e71c473316e32f8c93ba4068ef6da1a57899c0f7 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -254,8 +254,7 @@ static struct gpio_led cpu9krea_leds[] = { static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = { { - I2C_BOARD_INFO("rtc-ds1307", 0x68), - .type = "ds1339", + I2C_BOARD_INFO("ds1339", 0x68), }, }; @@ -312,12 +311,12 @@ static void __init cpu9krea_add_device_buttons(void) /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata cpu9krea_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = AT91_PIN_PA29, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata cpu9krea_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PA29, + .wp_pin = -EINVAL, + }, }; static void __init cpu9krea_board_init(void) @@ -359,7 +358,7 @@ static void __init cpu9krea_board_init(void) /* Ethernet */ at91_add_device_eth(&cpu9krea_macb_data); /* MMC */ - at91_add_device_mmc(0, &cpu9krea_mmc_data); + at91_add_device_mci(0, &cpu9krea_mci0_data); /* I2C */ at91_add_device_i2c(cpu9krea_i2c_devices, ARRAY_SIZE(cpu9krea_i2c_devices)); diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 2e6d043c82f202e352b426e0ac699a74b15fbdcd..2cbd1a2b6c35d33bed32f776f52e640742611fc8 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -78,11 +78,12 @@ static struct at91_udc_data __initdata cpuat91_udc_data = { .pullup_pin = AT91_PIN_PC14, }; -static struct at91_mmc_data __initdata cpuat91_mmc_data = { - .det_pin = AT91_PIN_PC2, - .wire4 = 1, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata cpuat91_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PC2, + .wp_pin = -EINVAL, + }, }; static struct physmap_flash_data cpuat91_flash_data = { @@ -168,7 +169,7 @@ static void __init cpuat91_board_init(void) /* USB Device */ at91_add_device_udc(&cpuat91_udc_data); /* MMC */ - at91_add_device_mmc(0, &cpuat91_mmc_data); + at91_add_device_mci(0, &cpuat91_mci0_data); /* I2C */ at91_add_device_i2c(NULL, 0); /* Platform devices */ diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index 462bc319cbc589b2bc86d80c4ebcce642ac7bc33..3e37437a7a613222245df1f297e18cde4a02dc97 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -87,12 +87,12 @@ static struct at91_cf_data __initdata csb337_cf_data = { .rst_pin = AT91_PIN_PD2, }; -static struct at91_mmc_data __initdata csb337_mmc_data = { - .det_pin = AT91_PIN_PD5, - .slot_b = 0, - .wire4 = 1, - .wp_pin = AT91_PIN_PD6, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata csb337_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PD5, + .wp_pin = AT91_PIN_PD6, + }, }; static struct spi_board_info csb337_spi_devices[] = { @@ -220,8 +220,6 @@ static struct gpio_led csb_leds[] = { static void __init csb337_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); /* Serial */ /* DBGU on ttyS0 */ at91_register_uart(0, 0, 0); @@ -240,7 +238,7 @@ static void __init csb337_board_init(void) /* SPI */ at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices)); /* MMC */ - at91_add_device_mmc(0, &csb337_mmc_data); + at91_add_device_mci(0, &csb337_mci0_data); /* NOR flash */ platform_device_register(&csb_flash); /* LEDs */ diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index d1e1f3fc0a47a06d912eddc622048b0663c8be8d..0cfac16ee9d5e75392ebd025e21521c34f33d3ab 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -70,12 +70,12 @@ static struct at91_cf_data __initdata eb9200_cf_data = { .rst_pin = AT91_PIN_PC5, }; -static struct at91_mmc_data __initdata eb9200_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata eb9200_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; static struct i2c_board_info __initdata eb9200_i2c_devices[] = { @@ -113,7 +113,7 @@ static void __init eb9200_board_init(void) at91_add_device_spi(NULL, 0); /* MMC */ /* only supports 1 or 4 bit interface, not wired through to SPI */ - at91_add_device_mmc(0, &eb9200_mmc_data); + at91_add_device_mci(0, &eb9200_mci0_data); } MACHINE_START(ATEB9200, "Embest ATEB9200") diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 9c24cb25707c61dae73275d31c4c669af20528cd..3d931ffac4bf01d647c586c428627bb2be903f03 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -64,12 +64,12 @@ static struct at91_usbh_data __initdata ecb_at91usbh_data = { .overcurrent_pin= {-EINVAL, -EINVAL}, }; -static struct at91_mmc_data __initdata ecb_at91mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ecbat91_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; @@ -138,11 +138,20 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = { }, }; +/* + * LEDs + */ +static struct gpio_led ecb_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PC7, + .active_low = 1, + .default_trigger = "heartbeat", + } +}; + static void __init ecb_at91board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -161,10 +170,13 @@ static void __init ecb_at91board_init(void) at91_add_device_i2c(NULL, 0); /* MMC */ - at91_add_device_mmc(0, &ecb_at91mmc_data); + at91_add_device_mci(0, &ecbat91_mci0_data); /* SPI */ at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices)); + + /* LEDs */ + at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds)); } MACHINE_START(ECBAT91, "emQbit's ECB_AT91") diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 82bdfde3405f52d0ef1fd34507b12bd4bfe56466..d93658a2b12828a14e70cbdacd418498f13c7f0f 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -56,12 +56,12 @@ static struct at91_udc_data __initdata eco920_udc_data = { .pullup_pin = AT91_PIN_PB13, }; -static struct at91_mmc_data __initdata eco920_mmc_data = { - .slot_b = 0, - .wire4 = 0, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata eco920_mci0_data = { + .slot[0] = { + .bus_width = 1, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; static struct physmap_flash_data eco920_flash_data = { @@ -93,10 +93,26 @@ static struct spi_board_info eco920_spi_devices[] = { }, }; +/* + * LEDs + */ +static struct gpio_led eco920_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PB0, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* D2 */ + .name = "led2", + .gpio = AT91_PIN_PB1, + .active_low = 1, + .default_trigger = "timer", + } +}; + static void __init eco920_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); /* DBGU on ttyS0. (Rx & Tx only */ at91_register_uart(0, 0, 0); at91_add_device_serial(); @@ -104,7 +120,7 @@ static void __init eco920_board_init(void) at91_add_device_usbh(&eco920_usbh_data); at91_add_device_udc(&eco920_udc_data); - at91_add_device_mmc(0, &eco920_mmc_data); + at91_add_device_mci(0, &eco920_mci0_data); platform_device_register(&eco920_flash); at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1) @@ -127,6 +143,8 @@ static void __init eco920_board_init(void) ); at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices)); + /* LEDs */ + at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds)); } MACHINE_START(ECO920, "eco920") diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 6cc83a87d77cf9422e958f9526720842de343cb9..fa98abacb1ba9ed18418ab107bdc27cbae645540 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -75,12 +75,12 @@ static struct spi_board_info flexibity_spi_devices[] = { }; /* MCI (SD/MMC) */ -static struct at91_mmc_data __initdata flexibity_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = AT91_PIN_PC9, - .wp_pin = AT91_PIN_PC4, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata flexibity_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PC9, + .wp_pin = AT91_PIN_PC4, + }, }; /* LEDs */ @@ -152,7 +152,7 @@ static void __init flexibity_board_init(void) at91_add_device_spi(flexibity_spi_devices, ARRAY_SIZE(flexibity_spi_devices)); /* MMC */ - at91_add_device_mmc(0, &flexibity_mmc_data); + at91_add_device_mci(0, &flexibity_mci0_data); /* LEDs */ at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds)); } diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 69ab1247ef81263fb430de41d5c025263de5cb9e..6e47071d820639042fd3905437ee236b3b2b1d44 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -86,7 +86,7 @@ static struct at91_udc_data __initdata foxg20_udc_data = { * SPI devices. */ static struct spi_board_info foxg20_spi_devices[] = { -#if !defined(CONFIG_MMC_AT91) +#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) { .modalias = "mtd_dataflash", .chip_select = 1, @@ -109,12 +109,12 @@ static struct macb_platform_data __initdata foxg20_macb_data = { * MCI (SD/MMC) * det_pin, wp_pin and vcc_pin are not connected */ -static struct at91_mmc_data __initdata foxg20_mmc_data = { - .slot_b = 1, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata foxg20_mci0_data = { + .slot[1] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; @@ -247,7 +247,7 @@ static void __init foxg20_board_init(void) /* Ethernet */ at91_add_device_eth(&foxg20_macb_data); /* MMC */ - at91_add_device_mmc(0, &foxg20_mmc_data); + at91_add_device_mci(0, &foxg20_mci0_data); /* I2C */ at91_add_device_i2c(foxg20_i2c_devices, ARRAY_SIZE(foxg20_i2c_devices)); /* LEDs */ diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index 64c1dbf88a07bfe602f9c8c29071bff1ba5db774..86050da3ba53deb09efb650c019ebb03ee8ff6f0 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -66,11 +66,20 @@ static struct at91_udc_data __initdata kafa_udc_data = { .pullup_pin = AT91_PIN_PB7, }; +/* + * LEDs + */ +static struct gpio_led kafa_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PB4, + .active_low = 1, + .default_trigger = "heartbeat", + }, +}; + static void __init kafa_board_init(void) { - /* Set up the LEDs */ - at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -88,6 +97,8 @@ static void __init kafa_board_init(void) at91_add_device_i2c(NULL, 0); /* SPI */ at91_add_device_spi(NULL, 0); + /* LEDs */ + at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds)); } MACHINE_START(KAFA, "Sperry-Sun KAFA") diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index 5d96cb85175f9a6bce00c7b30ce12fa5d46b5821..abe9fed7a3e087b8fc1abe16d0c3731f702e665b 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -69,12 +69,12 @@ static struct at91_udc_data __initdata kb9202_udc_data = { .pullup_pin = AT91_PIN_PB22, }; -static struct at91_mmc_data __initdata kb9202_mmc_data = { - .det_pin = AT91_PIN_PB2, - .slot_b = 0, - .wire4 = 1, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata kb9202_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB2, + .wp_pin = -EINVAL, + }, }; static struct mtd_partition __initdata kb9202_nand_partition[] = { @@ -96,11 +96,26 @@ static struct atmel_nand_data __initdata kb9202_nand_data = { .num_parts = ARRAY_SIZE(kb9202_nand_partition), }; +/* + * LEDs + */ +static struct gpio_led kb9202_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PC19, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* D2 */ + .name = "led2", + .gpio = AT91_PIN_PC18, + .active_low = 1, + .default_trigger = "timer", + } +}; + static void __init kb9202_board_init(void) { - /* Set up the LEDs */ - at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -121,13 +136,15 @@ static void __init kb9202_board_init(void) /* USB Device */ at91_add_device_udc(&kb9202_udc_data); /* MMC */ - at91_add_device_mmc(0, &kb9202_mmc_data); + at91_add_device_mci(0, &kb9202_mci0_data); /* I2C */ at91_add_device_i2c(NULL, 0); /* SPI */ at91_add_device_spi(NULL, 0); /* NAND */ at91_add_device_nand(&kb9202_nand_data); + /* LEDs */ + at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds)); } MACHINE_START(KB9200, "KB920x") diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index 18103c5d993ce24c148887d5bfc60331f4cb556d..9cda3fd346ae3e4657cf415b6dbe1e4040c20db5 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -138,11 +138,12 @@ static struct spi_board_info neocore926_spi_devices[] = { /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata neocore926_mmc_data = { - .wire4 = 1, - .det_pin = AT91_PIN_PE18, - .wp_pin = AT91_PIN_PE19, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata neocore926_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PE18, + .wp_pin = AT91_PIN_PE19, + }, }; @@ -354,7 +355,7 @@ static void __init neocore926_board_init(void) neocore926_add_device_ts(); /* MMC */ - at91_add_device_mmc(1, &neocore926_mmc_data); + at91_add_device_mci(0, &neocore926_mci0_data); /* Ethernet */ at91_add_device_eth(&neocore926_macb_data); diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index 127065504508c8fd5bffd4f00d778339fe497788..f83e1de699e626daec82ce5cd0307236b7d51174 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -62,12 +62,12 @@ static struct at91_usbh_data __initdata picotux200_usbh_data = { .overcurrent_pin= {-EINVAL, -EINVAL}, }; -static struct at91_mmc_data __initdata picotux200_mmc_data = { - .det_pin = AT91_PIN_PB27, - .slot_b = 0, - .wire4 = 1, - .wp_pin = AT91_PIN_PA17, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata picotux200_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB27, + .wp_pin = AT91_PIN_PA17, + }, }; #define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0 @@ -112,7 +112,7 @@ static void __init picotux200_board_init(void) at91_add_device_i2c(NULL, 0); /* MMC */ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(0, &picotux200_mmc_data); + at91_add_device_mci(0, &picotux200_mci0_data); /* NOR Flash */ platform_device_register(&picotux200_flash); } diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index bf351e285422684cc71644e090ea428c766c556b..799f214edebe5a82a20a5a2af44eb6bef98afca8 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -156,12 +156,12 @@ static void __init ek_add_device_nand(void) /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ek_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; /* @@ -245,7 +245,7 @@ static void __init ek_board_init(void) /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &ek_mci0_data); /* Push Buttons */ ek_add_device_buttons(); /* LEDs */ diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index cc2bf9796073bcb096883059c7cced4153287a91..66338e7ebfba69b1ce5f6b3b1fe669cbffb7c8fe 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -77,12 +77,12 @@ static struct at91_cf_data __initdata dk_cf_data = { }; #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD -static struct at91_mmc_data __initdata dk_mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata dk_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; #endif @@ -177,9 +177,6 @@ static struct gpio_led dk_leds[] = { static void __init dk_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -208,7 +205,7 @@ static void __init dk_board_init(void) #else /* MMC */ at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(0, &dk_mmc_data); + at91_add_device_mci(0, &dk_mci0_data); #endif /* NAND */ at91_add_device_nand(&dk_nand_data); diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 62e19e64c9d3f52dc0d5ca8e2470dfe9cfc1918e..5d1b5729dc69189d7a98589505d6221100f08cff 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -70,12 +70,12 @@ static struct at91_udc_data __initdata ek_udc_data = { }; #ifndef CONFIG_MTD_AT91_DATAFLASH_CARD -static struct at91_mmc_data __initdata ek_mmc_data = { - .det_pin = AT91_PIN_PB27, - .slot_b = 0, - .wire4 = 1, - .wp_pin = AT91_PIN_PA17, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ek_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB27, + .wp_pin = AT91_PIN_PA17, + } }; #endif @@ -148,9 +148,6 @@ static struct gpio_led ek_leds[] = { static void __init ek_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -177,7 +174,7 @@ static void __init ek_board_init(void) #else /* MMC */ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &ek_mci0_data); #endif /* NOR Flash */ platform_device_register(&ek_flash); diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index c3b43aefdb7597d2f71dc5e8e40e054019b891f6..a0ecf04e9ae3d233a94dab1ddf90749a5272f2dc 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -58,11 +58,12 @@ static struct at91_usbh_data rsi_ews_usbh_data __initdata = { /* * SD/MC */ -static struct at91_mmc_data rsi_ews_mmc_data __initdata = { - .slot_b = 0, - .wire4 = 1, - .det_pin = AT91_PIN_PB27, - .wp_pin = AT91_PIN_PB29, +static struct mci_platform_data __initdata rsi_ews_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB27, + .wp_pin = AT91_PIN_PB29, + }, }; /* @@ -185,9 +186,6 @@ static struct platform_device rsiews_nor_flash = { */ static void __init rsi_ews_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ /* This one is for debugging */ @@ -215,7 +213,7 @@ static void __init rsi_ews_board_init(void) at91_add_device_spi(rsi_ews_spi_devices, ARRAY_SIZE(rsi_ews_spi_devices)); /* MMC */ - at91_add_device_mmc(0, &rsi_ews_mmc_data); + at91_add_device_mci(0, &rsi_ews_mci0_data); /* NOR Flash */ platform_device_register(&rsiews_nor_flash); /* LEDs */ diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index 7bf6da70d7d56bbe735156f5c72add8a5441338b..c5f01acce3c03bb057f5df5c460b92f466185fac 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -73,7 +73,7 @@ static struct at91_udc_data __initdata ek_udc_data = { * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -#if !defined(CONFIG_MMC_AT91) +#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 1, @@ -158,19 +158,34 @@ static void __init ek_add_device_nand(void) /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 1, - .wire4 = 1, - .det_pin = AT91_PIN_PC8, - .wp_pin = AT91_PIN_PC4, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ek_mci0_data = { + .slot[1] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PC8, + .wp_pin = AT91_PIN_PC4, + }, +}; + +/* + * LEDs + */ +static struct gpio_led ek_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PA9, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* D2 */ + .name = "led2", + .gpio = AT91_PIN_PA6, + .active_low = 1, + .default_trigger = "timer", + } }; static void __init ek_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -194,9 +209,11 @@ static void __init ek_board_init(void) /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &ek_mci0_data); /* I2C */ at91_add_device_i2c(NULL, 0); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 889c1bf71eb596d2efd28fc76d086f2d87a42b9d..8cd6e679fbe071d9269d710b214197388209373c 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -108,7 +108,7 @@ static void __init at73c213_set_clk(struct at73c213_board_info *info) {} * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -#if !defined(CONFIG_MMC_AT91) +#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 1, @@ -211,12 +211,12 @@ static void __init ek_add_device_nand(void) /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 1, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata ek_mci0_data = { + .slot[1] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; @@ -329,7 +329,7 @@ static void __init ek_board_init(void) /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &ek_mci0_data); /* I2C */ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices)); /* SSC (to AT73C213) */ diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 2269be5fa3841075539fd106746ce7c7cc88776d..27b3af1a3047e4bcf209e602f1fcc23a1561de0d 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -340,11 +340,12 @@ static struct spi_board_info ek_spi_devices[] = { * MCI (SD/MMC) * det_pin, wp_pin and vcc_pin are not connected */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = -EINVAL, + .wp_pin = -EINVAL, + }, }; #endif /* CONFIG_SPI_ATMEL_* */ @@ -569,9 +570,6 @@ static struct gpio_led ek_leds[] = { static void __init ek_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -598,7 +596,7 @@ static void __init ek_board_init(void) at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX); #else /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &mci0_data); #endif /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 82adf581afc2eb48868ea1d3198685bff22d457a..073e17403d982dad660126f0323754d0b36532c4 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -141,11 +141,12 @@ static struct spi_board_info ek_spi_devices[] = { /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .wire4 = 1, - .det_pin = AT91_PIN_PE18, - .wp_pin = AT91_PIN_PE19, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata mci1_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PE18, + .wp_pin = AT91_PIN_PE19, + }, }; @@ -420,7 +421,7 @@ static void __init ek_board_init(void) /* Touchscreen */ ek_add_device_ts(); /* MMC */ - at91_add_device_mmc(1, &ek_mmc_data); + at91_add_device_mci(1, &mci1_data); /* Ethernet */ at91_add_device_eth(&ek_macb_data); /* NAND */ diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 4ea4ee00364b44fd2fe1ef693d72e08e57a734e9..3ab2b86a3762a67da9b808386d39c51fb8cd2544 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -92,7 +92,7 @@ static struct at91_udc_data __initdata ek_udc_data = { * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -#if !(defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_AT91)) +#if !IS_ENABLED(CONFIG_MMC_ATMELMCI) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 1, @@ -199,7 +199,6 @@ static void __init ek_add_device_nand(void) * MCI (SD/MMC) * wp_pin and vcc_pin are not connected */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) static struct mci_platform_data __initdata ek_mmc_data = { .slot[1] = { .bus_width = 4, @@ -208,28 +207,15 @@ static struct mci_platform_data __initdata ek_mmc_data = { }, }; -#else -static struct at91_mmc_data __initdata ek_mmc_data = { - .slot_b = 1, /* Only one slot so use slot B */ - .wire4 = 1, - .det_pin = AT91_PIN_PC9, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, -}; -#endif static void __init ek_add_device_mmc(void) { -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) if (ek_have_2mmc()) { ek_mmc_data.slot[0].bus_width = 4; ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2; ek_mmc_data.slot[0].wp_pin = -1; } at91_add_device_mci(0, &ek_mmc_data); -#else - at91_add_device_mmc(0, &ek_mmc_data); -#endif } /* diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index e7dc3ead7045f3f938c65729263a71be5050dafb..fb89ea92e3f24bc0f52934c18aec7528b43c643d 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -56,11 +56,12 @@ static struct usba_platform_data __initdata ek_usba_udc_data = { /* * MCI (SD/MMC) */ -static struct at91_mmc_data __initdata ek_mmc_data = { - .wire4 = 1, - .det_pin = AT91_PIN_PA15, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PA15, + .wp_pin = -EINVAL, + }, }; @@ -303,7 +304,7 @@ static void __init ek_board_init(void) /* SPI */ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); /* MMC */ - at91_add_device_mmc(0, &ek_mmc_data); + at91_add_device_mci(0, &mci0_data); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); /* AC97 */ diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index 29eae1626bf79ffa1ca4c4bf562d6ef255b81f82..c3fb31d5116e95daa3125974546b3628ad3770c9 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -83,7 +83,6 @@ static void __init add_device_nand(void) * MCI (SD/MMC) * det_pin, wp_pin and vcc_pin are not connected */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) static struct mci_platform_data __initdata mmc_data = { .slot[0] = { .bus_width = 4, @@ -91,15 +90,6 @@ static struct mci_platform_data __initdata mmc_data = { .wp_pin = -1, }, }; -#else -static struct at91_mmc_data __initdata mmc_data = { - .slot_b = 0, - .wire4 = 1, - .det_pin = -EINVAL, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, -}; -#endif /* @@ -223,11 +213,7 @@ void __init stamp9g20_board_init(void) /* NAND */ add_device_nand(); /* MMC */ -#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE) at91_add_device_mci(0, &mmc_data); -#else - at91_add_device_mmc(0, &mmc_data); -#endif /* W1 */ add_w1(); } diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index c1476b9fe7b91a98ef279e4be2ecd250300bb1fc..6ea069b5733584b5a0fc68dd2cc61665763258c9 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -109,14 +109,12 @@ static struct mmc_spi_platform_data at91_mmc_spi_pdata = { * SPI devices. */ static struct spi_board_info usb_a9263_spi_devices[] = { -#if !defined(CONFIG_MMC_AT91) { /* DataFlash chip */ .modalias = "mtd_dataflash", .chip_select = 0, .max_speed_hz = 15 * 1000 * 1000, .bus_num = 0, } -#endif }; static struct spi_board_info usb_a9g20_spi_devices[] = { diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index 516d340549d8db4c4ffe0a5ff461aee9cb7e6175..f162fdfd66ebda1f9df3ce1f4c747eadb60656ea 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -119,11 +119,12 @@ static struct at91_udc_data __initdata yl9200_udc_data = { /* * MMC */ -static struct at91_mmc_data __initdata yl9200_mmc_data = { - .det_pin = AT91_PIN_PB9, - .wire4 = 1, - .wp_pin = -EINVAL, - .vcc_pin = -EINVAL, +static struct mci_platform_data __initdata yl9200_mci0_data = { + .slot[0] = { + .bus_width = 4, + .detect_pin = AT91_PIN_PB9, + .wp_pin = -EINVAL, + }, }; /* @@ -541,9 +542,6 @@ void __init yl9200_add_device_video(void) {} static void __init yl9200_board_init(void) { - /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ - at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -568,7 +566,7 @@ static void __init yl9200_board_init(void) /* I2C */ at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices)); /* MMC */ - at91_add_device_mmc(0, &yl9200_mmc_data); + at91_add_device_mci(0, &yl9200_mci0_data); /* NAND */ at91_add_device_nand(&yl9200_nand_data); /* NOR Flash */ diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index de2ec6b8fea7693555c2b25367b4efb1e06cae25..33361505c0cd70cc3171f64ec4d5306670b2cd4b 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -63,6 +63,12 @@ EXPORT_SYMBOL_GPL(at91_pmc_base); #define cpu_has_300M_plla() (cpu_is_at91sam9g10()) +#define cpu_has_240M_plla() (cpu_is_at91sam9261() \ + || cpu_is_at91sam9263() \ + || cpu_is_at91sam9rl()) + +#define cpu_has_210M_plla() (cpu_is_at91sam9260()) + #define cpu_has_pllb() (!(cpu_is_at91sam9rl() \ || cpu_is_at91sam9g45() \ || cpu_is_at91sam9x5() \ @@ -619,7 +625,7 @@ fail: return 0; } -static struct clk *const standard_pmc_clocks[] __initdata = { +static struct clk *const standard_pmc_clocks[] __initconst = { /* four primary clocks */ &clk32k, &main_clk, @@ -706,6 +712,12 @@ static int __init at91_pmc_init(unsigned long main_clock) } else if (cpu_has_800M_plla()) { if (plla.rate_hz > 800000000) pll_overclock = true; + } else if (cpu_has_240M_plla()) { + if (plla.rate_hz > 240000000) + pll_overclock = true; + } else if (cpu_has_210M_plla()) { + if (plla.rate_hz > 210000000) + pll_overclock = true; } else { if (plla.rate_hz > 209000000) pll_overclock = true; diff --git a/arch/arm/mach-at91/include/mach/atmel-mci.h b/arch/arm/mach-at91/include/mach/atmel-mci.h index 998cb0c07135649b8b766af6c64e50d82ae8c92f..cd580a12e9042622b0fd8f478a61d71f5784e9c5 100644 --- a/arch/arm/mach-at91/include/mach/atmel-mci.h +++ b/arch/arm/mach-at91/include/mach/atmel-mci.h @@ -1,7 +1,7 @@ #ifndef __MACH_ATMEL_MCI_H #define __MACH_ATMEL_MCI_H -#include +#include /** * struct mci_dma_data - DMA data for MCI interface diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 369afc2ffc5b972934872aa9266c8a8b774e9bec..c55a4364ffb433867aa150485880f7467081625f 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -187,7 +187,6 @@ struct at91_can_data { extern void __init at91_add_device_can(struct at91_can_data *data); /* LEDs */ -extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); diff --git a/arch/arm/mach-at91/include/mach/hardware.h b/arch/arm/mach-at91/include/mach/hardware.h index 09242b67d277593aaf7208cdf07e351fe48f90ae..711a7892d331624fc6fa8315460720f4c9c89b63 100644 --- a/arch/arm/mach-at91/include/mach/hardware.h +++ b/arch/arm/mach-at91/include/mach/hardware.h @@ -67,13 +67,13 @@ * to 0xFEF78000 .. 0xFF000000. (544Kb) */ #define AT91_IO_PHYS_BASE 0xFFF78000 -#define AT91_IO_VIRT_BASE (0xFF000000 - AT91_IO_SIZE) +#define AT91_IO_VIRT_BASE IOMEM(0xFF000000 - AT91_IO_SIZE) #else /* * Identity mapping for the non MMU case. */ #define AT91_IO_PHYS_BASE AT91_BASE_SYS -#define AT91_IO_VIRT_BASE AT91_IO_PHYS_BASE +#define AT91_IO_VIRT_BASE IOMEM(AT91_IO_PHYS_BASE) #endif #define AT91_IO_SIZE (0xFFFFFFFF - AT91_IO_PHYS_BASE + 1) diff --git a/arch/arm/mach-at91/include/mach/uncompress.h b/arch/arm/mach-at91/include/mach/uncompress.h index 6f6118d1576aa8a48189db75e9ad907d1a896e74..97ad68a826f8559595d133104fa3fd53f891b4cd 100644 --- a/arch/arm/mach-at91/include/mach/uncompress.h +++ b/arch/arm/mach-at91/include/mach/uncompress.h @@ -94,7 +94,7 @@ static const u32 uarts_sam9x5[] = { 0, }; -static inline const u32* decomp_soc_detect(u32 dbgu_base) +static inline const u32* decomp_soc_detect(void __iomem *dbgu_base) { u32 cidr, socid; @@ -142,10 +142,10 @@ static inline void arch_decomp_setup(void) int i = 0; const u32* usarts; - usarts = decomp_soc_detect(AT91_BASE_DBGU0); + usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU0); if (!usarts) - usarts = decomp_soc_detect(AT91_BASE_DBGU1); + usarts = decomp_soc_detect((void __iomem *)AT91_BASE_DBGU1); if (!usarts) { at91_uart = NULL; return; diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 8dfafe76ffe6298f822ad2b4d3ea64ebf0243337..1b1e62b5f41be1e8b3249cb0961c19b43bbcf417 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -90,108 +90,3 @@ void __init at91_pwm_leds(struct gpio_led *leds, int nr) #else void __init at91_pwm_leds(struct gpio_led *leds, int nr){} #endif - - -/* ------------------------------------------------------------------------- */ - -#if defined(CONFIG_LEDS) - -#include - -/* - * Old ARM-specific LED framework; not fully functional when generic time is - * in use. - */ - -static u8 at91_leds_cpu; -static u8 at91_leds_timer; - -static inline void at91_led_on(unsigned int led) -{ - at91_set_gpio_value(led, 0); -} - -static inline void at91_led_off(unsigned int led) -{ - at91_set_gpio_value(led, 1); -} - -static inline void at91_led_toggle(unsigned int led) -{ - unsigned long is_off = at91_get_gpio_value(led); - if (is_off) - at91_led_on(led); - else - at91_led_off(led); -} - - -/* - * Handle LED events. - */ -static void at91_leds_event(led_event_t evt) -{ - unsigned long flags; - - local_irq_save(flags); - - switch(evt) { - case led_start: /* System startup */ - at91_led_on(at91_leds_cpu); - break; - - case led_stop: /* System stop / suspend */ - at91_led_off(at91_leds_cpu); - break; - -#ifdef CONFIG_LEDS_TIMER - case led_timer: /* Every 50 timer ticks */ - at91_led_toggle(at91_leds_timer); - break; -#endif - -#ifdef CONFIG_LEDS_CPU - case led_idle_start: /* Entering idle state */ - at91_led_off(at91_leds_cpu); - break; - - case led_idle_end: /* Exit idle state */ - at91_led_on(at91_leds_cpu); - break; -#endif - - default: - break; - } - - local_irq_restore(flags); -} - - -static int __init leds_init(void) -{ - if (!at91_leds_timer || !at91_leds_cpu) - return -ENODEV; - - leds_event = at91_leds_event; - - leds_event(led_start); - return 0; -} - -__initcall(leds_init); - - -void __init at91_init_leds(u8 cpu_led, u8 timer_led) -{ - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); - - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; -} - -#else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} -#endif diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 944bffb08991366a453b1036eff75d19094b6ffd..e6f52de1062fd960fbd3fc015fb5c8e2211ba91f 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -73,7 +73,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length) { struct map_desc *desc = &sram_desc[bank]; - desc->virtual = AT91_IO_VIRT_BASE - length; + desc->virtual = (unsigned long)AT91_IO_VIRT_BASE - length; if (bank > 0) desc->virtual -= sram_desc[bank - 1].length; @@ -88,7 +88,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length) } static struct map_desc at91_io_desc __initdata = { - .virtual = AT91_VA_BASE_SYS, + .virtual = (unsigned long)AT91_VA_BASE_SYS, .pfn = __phys_to_pfn(AT91_BASE_SYS), .length = SZ_16K, .type = MT_DEVICE, diff --git a/arch/arm/mach-bcm2835/Makefile b/arch/arm/mach-bcm2835/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..4c3892fe02c3ddf3eb93e5cc66e4526b768ec790 --- /dev/null +++ b/arch/arm/mach-bcm2835/Makefile @@ -0,0 +1 @@ +obj-y += bcm2835.o diff --git a/arch/arm/mach-bcm2835/Makefile.boot b/arch/arm/mach-bcm2835/Makefile.boot new file mode 100644 index 0000000000000000000000000000000000000000..2d30e17f5b6987e45cdce393ec03615a6b15ed60 --- /dev/null +++ b/arch/arm/mach-bcm2835/Makefile.boot @@ -0,0 +1,3 @@ + zreladdr-y := 0x00008000 +params_phys-y := 0x00000100 +initrd_phys-y := 0x00800000 diff --git a/arch/arm/mach-bcm2835/bcm2835.c b/arch/arm/mach-bcm2835/bcm2835.c new file mode 100644 index 0000000000000000000000000000000000000000..f6fea493357171fe362e8b4dbbdb75a6121ddf70 --- /dev/null +++ b/arch/arm/mach-bcm2835/bcm2835.c @@ -0,0 +1,64 @@ +/* + * Copyright (C) 2010 Broadcom + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include + +#include +#include + +#include + +static struct map_desc io_map __initdata = { + .virtual = BCM2835_PERIPH_VIRT, + .pfn = __phys_to_pfn(BCM2835_PERIPH_PHYS), + .length = BCM2835_PERIPH_SIZE, + .type = MT_DEVICE +}; + +void __init bcm2835_map_io(void) +{ + iotable_init(&io_map, 1); +} + +void __init bcm2835_init(void) +{ + int ret; + + bcm2835_init_clocks(); + + ret = of_platform_populate(NULL, of_default_bus_match_table, NULL, + NULL); + if (ret) { + pr_err("of_platform_populate failed: %d\n", ret); + BUG(); + } +} + +static const char * const bcm2835_compat[] = { + "brcm,bcm2835", + NULL +}; + +DT_MACHINE_START(BCM2835, "BCM2835") + .map_io = bcm2835_map_io, + .init_irq = bcm2835_init_irq, + .handle_irq = bcm2835_handle_irq, + .init_machine = bcm2835_init, + .timer = &bcm2835_timer, + .dt_compat = bcm2835_compat +MACHINE_END diff --git a/arch/arm/mach-picoxcell/include/mach/map.h b/arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h similarity index 57% rename from arch/arm/mach-picoxcell/include/mach/map.h rename to arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h index c06afad218bbdd5f8a6ba13429773699a7cf8137..d4dfcf7a9cda417e382a37e15fb70fe058113947 100644 --- a/arch/arm/mach-picoxcell/include/mach/map.h +++ b/arch/arm/mach-bcm2835/include/mach/bcm2835_soc.h @@ -1,5 +1,8 @@ /* - * Copyright (c) 2011 Picochip Ltd., Jamie Iles + * Copyright (C) 2012 Stephen Warren + * + * Derived from code: + * Copyright (C) 2010 Broadcom * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -11,15 +14,16 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ -#ifndef __PICOXCELL_MAP_H__ -#define __PICOXCELL_MAP_H__ -#define PHYS_TO_IO(x) (((x) & 0x00ffffff) | 0xfe000000) +#ifndef __MACH_BCM2835_BCM2835_SOC_H__ +#define __MACH_BCM2835_BCM2835_SOC_H__ -#ifdef __ASSEMBLY__ -#define IO_ADDRESS(x) PHYS_TO_IO((x)) -#else -#define IO_ADDRESS(x) (void __iomem __force *)(PHYS_TO_IO((x))) -#endif +#include -#endif /* __PICOXCELL_MAP_H__ */ +#define BCM2835_PERIPH_PHYS 0x20000000 +#define BCM2835_PERIPH_VIRT 0xf0000000 +#define BCM2835_PERIPH_SIZE SZ_16M +#define BCM2835_DEBUG_PHYS 0x20201000 +#define BCM2835_DEBUG_VIRT 0xf0201000 + +#endif diff --git a/arch/arm/mach-bcm2835/include/mach/debug-macro.S b/arch/arm/mach-bcm2835/include/mach/debug-macro.S new file mode 100644 index 0000000000000000000000000000000000000000..8a161e44ae28c8a3811cf2d4dcb7c6f2e35558fe --- /dev/null +++ b/arch/arm/mach-bcm2835/include/mach/debug-macro.S @@ -0,0 +1,21 @@ +/* + * Debugging macro include header + * + * Copyright (C) 2010 Broadcom + * Copyright (C) 1994-1999 Russell King + * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include + + .macro addruart, rp, rv, tmp + ldr \rp, =BCM2835_DEBUG_PHYS + ldr \rv, =BCM2835_DEBUG_VIRT + .endm + +#include diff --git a/arch/arm/mach-pnx4008/include/mach/param.h b/arch/arm/mach-bcm2835/include/mach/timex.h similarity index 81% rename from arch/arm/mach-pnx4008/include/mach/param.h rename to arch/arm/mach-bcm2835/include/mach/timex.h index 6ea02f2176b7e7d69918864fed74b0afacc97ab4..6d021e136ae3a3254a5fa8060d557d0dff77c903 100644 --- a/arch/arm/mach-pnx4008/include/mach/param.h +++ b/arch/arm/mach-bcm2835/include/mach/timex.h @@ -1,7 +1,7 @@ /* - * arch/arm/mach-pnx4008/include/mach/param.h + * BCM2835 system clock frequency * - * Copyright (C) 1999 ARM Limited + * Copyright (C) 2010 Broadcom * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -18,4 +18,9 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#define HZ 100 +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +#define CLOCK_TICK_RATE (1000000) + +#endif diff --git a/arch/arm/mach-bcm2835/include/mach/uncompress.h b/arch/arm/mach-bcm2835/include/mach/uncompress.h new file mode 100644 index 0000000000000000000000000000000000000000..cc46dcc72377ea8960cb6ce6932122df1b29a68f --- /dev/null +++ b/arch/arm/mach-bcm2835/include/mach/uncompress.h @@ -0,0 +1,45 @@ +/* + * Copyright (C) 2010 Broadcom + * Copyright (C) 2003 ARM Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include + +#define UART0_BASE BCM2835_DEBUG_PHYS + +#define BCM2835_UART_DR IOMEM(UART0_BASE + UART01x_DR) +#define BCM2835_UART_FR IOMEM(UART0_BASE + UART01x_FR) +#define BCM2835_UART_CR IOMEM(UART0_BASE + UART011_CR) + +static inline void putc(int c) +{ + while (__raw_readl(BCM2835_UART_FR) & UART01x_FR_TXFF) + barrier(); + + __raw_writel(c, BCM2835_UART_DR); +} + +static inline void flush(void) +{ + int fr; + + do { + fr = __raw_readl(BCM2835_UART_FR); + barrier(); + } while ((fr & (UART011_FR_TXFE | UART01x_FR_BUSY)) != UART011_FR_TXFE); +} + +#define arch_decomp_setup() +#define arch_decomp_wdog() diff --git a/arch/arm/mach-bcmring/Kconfig b/arch/arm/mach-bcmring/Kconfig deleted file mode 100644 index 9170d16dca508835c4e5f2b1abdfac35b1545d5a..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/Kconfig +++ /dev/null @@ -1,19 +0,0 @@ -choice - prompt "Processor selection in BCMRING family of devices" - depends on ARCH_BCMRING - default ARCH_BCM11107 - -config ARCH_FPGA11107 - bool "FPGA11107" - -config ARCH_BCM11107 - bool "BCM11107" -endchoice - -menu "BCMRING Options" - depends on ARCH_BCMRING - -config BCM_ZRELADDR - hex "Compressed ZREL ADDR" - -endmenu diff --git a/arch/arm/mach-bcmring/Makefile b/arch/arm/mach-bcmring/Makefile deleted file mode 100644 index f8d9fcedf91740146990cbbbcf4114e38b58ecfd..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Makefile for the linux kernel. -# - -# Object file lists. - -obj-y := arch.o mm.o irq.o clock.o core.o timer.o dma.o -obj-y += csp/ diff --git a/arch/arm/mach-bcmring/Makefile.boot b/arch/arm/mach-bcmring/Makefile.boot deleted file mode 100644 index aef2467757fa9afbb0e08803d9a35f5bc3a2a61a..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/Makefile.boot +++ /dev/null @@ -1,6 +0,0 @@ -# Address where decompressor will be written and eventually executed. -# -# default to SDRAM -zreladdr-y += $(CONFIG_BCM_ZRELADDR) -params_phys-y := 0x00000800 - diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c deleted file mode 100644 index 45c97b1ee9b1d59ba923a69b50e94337b48da993..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/arch.c +++ /dev/null @@ -1,199 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include - -#include "core.h" - -HW_DECLARE_SPINLOCK(arch) -HW_DECLARE_SPINLOCK(gpio) -#if defined(CONFIG_DEBUG_SPINLOCK) - EXPORT_SYMBOL(bcmring_gpio_reg_lock); -#endif - -/* sysctl */ -static int bcmring_arch_warm_reboot; /* do a warm reboot on hard reset */ - -static void bcmring_restart(char mode, const char *cmd) -{ - printk("arch_reset:%c %x\n", mode, bcmring_arch_warm_reboot); - - if (mode == 'h') { - /* Reboot configured in proc entry */ - if (bcmring_arch_warm_reboot) { - printk("warm reset\n"); - /* Issue Warm reset (do not reset ethernet switch, keep alive) */ - chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_WARM); - } else { - /* Force reset of everything */ - printk("force reset\n"); - chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT); - } - } else { - /* Force reset of everything */ - printk("force reset\n"); - chipcHw_reset(chipcHw_REG_SOFT_RESET_CHIP_SOFT); - } -} - -static struct ctl_table_header *bcmring_sysctl_header; - -static struct ctl_table bcmring_sysctl_warm_reboot[] = { - { - .procname = "warm", - .data = &bcmring_arch_warm_reboot, - .maxlen = sizeof(int), - .mode = 0644, - .proc_handler = proc_dointvec}, - {} -}; - -static struct ctl_table bcmring_sysctl_reboot[] = { - { - .procname = "reboot", - .mode = 0555, - .child = bcmring_sysctl_warm_reboot}, - {} -}; - -static struct resource nand_resource[] = { - [0] = { - .start = MM_ADDR_IO_NAND, - .end = MM_ADDR_IO_NAND + 0x1000 - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device nand_device = { - .name = "bcm-nand", - .id = -1, - .resource = nand_resource, - .num_resources = ARRAY_SIZE(nand_resource), -}; - -static struct resource pmu_resource = { - .start = IRQ_PMUIRQ, - .end = IRQ_PMUIRQ, - .flags = IORESOURCE_IRQ, -}; - -static struct platform_device pmu_device = { - .name = "arm-pmu", - .id = ARM_PMU_DEVICE_CPU, - .resource = &pmu_resource, - .num_resources = 1, -}; - - -static struct platform_device *devices[] __initdata = { - &nand_device, - &pmu_device, -}; - -/**************************************************************************** -* -* Called from the customize_machine function in arch/arm/kernel/setup.c -* -* The customize_machine function is tagged as an arch_initcall -* (see include/linux/init.h for the order that the various init sections -* are called in. -* -*****************************************************************************/ -static void __init bcmring_init_machine(void) -{ - - bcmring_sysctl_header = register_sysctl_table(bcmring_sysctl_reboot); - - /* Enable spread spectrum */ - chipcHw_enableSpreadSpectrum(); - - platform_add_devices(devices, ARRAY_SIZE(devices)); - - bcmring_amba_init(); - - dma_init(); -} - -/**************************************************************************** -* -* Called from setup_arch (in arch/arm/kernel/setup.c) to fixup any tags -* passed in by the boot loader. -* -*****************************************************************************/ - -static void __init bcmring_fixup(struct tag *t, char **cmdline, - struct meminfo *mi) { -#ifdef CONFIG_BLK_DEV_INITRD - printk(KERN_NOTICE "bcmring_fixup\n"); - t->hdr.tag = ATAG_CORE; - t->hdr.size = tag_size(tag_core); - t->u.core.flags = 0; - t->u.core.pagesize = PAGE_SIZE; - t->u.core.rootdev = 31 << 8 | 0; - t = tag_next(t); - - t->hdr.tag = ATAG_MEM; - t->hdr.size = tag_size(tag_mem32); - t->u.mem.start = CFG_GLOBAL_RAM_BASE; - t->u.mem.size = CFG_GLOBAL_RAM_SIZE; - - t = tag_next(t); - - t->hdr.tag = ATAG_NONE; - t->hdr.size = 0; -#endif -} - -/**************************************************************************** -* -* Machine Description -* -*****************************************************************************/ - -MACHINE_START(BCMRING, "BCMRING") - /* Maintainer: Broadcom Corporation */ - .fixup = bcmring_fixup, - .map_io = bcmring_map_io, - .init_early = bcmring_init_early, - .init_irq = bcmring_init_irq, - .timer = &bcmring_timer, - .init_machine = bcmring_init_machine, - .restart = bcmring_restart, -MACHINE_END diff --git a/arch/arm/mach-bcmring/clock.c b/arch/arm/mach-bcmring/clock.c deleted file mode 100644 index ad237a42d265ec6033c85d7684f16940551c17ad..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/clock.c +++ /dev/null @@ -1,223 +0,0 @@ -/***************************************************************************** -* Copyright 2001 - 2009 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "clock.h" - -#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY) -#define clk_is_pll1(x) ((x)->type & CLK_TYPE_PLL1) -#define clk_is_pll2(x) ((x)->type & CLK_TYPE_PLL2) -#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE) -#define clk_is_bypassable(x) ((x)->type & CLK_TYPE_BYPASSABLE) - -#define clk_is_using_xtal(x) ((x)->mode & CLK_MODE_XTAL) - -static DEFINE_SPINLOCK(clk_lock); - -static void __clk_enable(struct clk *clk) -{ - if (!clk) - return; - - /* enable parent clock first */ - if (clk->parent) - __clk_enable(clk->parent); - - if (clk->use_cnt++ == 0) { - if (clk_is_pll1(clk)) { /* PLL1 */ - chipcHw_pll1Enable(clk->rate_hz, 0); - } else if (clk_is_pll2(clk)) { /* PLL2 */ - chipcHw_pll2Enable(clk->rate_hz); - } else if (clk_is_using_xtal(clk)) { /* source is crystal */ - if (!clk_is_primary(clk)) - chipcHw_bypassClockEnable(clk->csp_id); - } else { /* source is PLL */ - chipcHw_setClockEnable(clk->csp_id); - } - } -} - -int clk_enable(struct clk *clk) -{ - unsigned long flags; - - if (!clk) - return -EINVAL; - - spin_lock_irqsave(&clk_lock, flags); - __clk_enable(clk); - spin_unlock_irqrestore(&clk_lock, flags); - - return 0; -} -EXPORT_SYMBOL(clk_enable); - -static void __clk_disable(struct clk *clk) -{ - if (!clk) - return; - - BUG_ON(clk->use_cnt == 0); - - if (--clk->use_cnt == 0) { - if (clk_is_pll1(clk)) { /* PLL1 */ - chipcHw_pll1Disable(); - } else if (clk_is_pll2(clk)) { /* PLL2 */ - chipcHw_pll2Disable(); - } else if (clk_is_using_xtal(clk)) { /* source is crystal */ - if (!clk_is_primary(clk)) - chipcHw_bypassClockDisable(clk->csp_id); - } else { /* source is PLL */ - chipcHw_setClockDisable(clk->csp_id); - } - } - - if (clk->parent) - __clk_disable(clk->parent); -} - -void clk_disable(struct clk *clk) -{ - unsigned long flags; - - if (!clk) - return; - - spin_lock_irqsave(&clk_lock, flags); - __clk_disable(clk); - spin_unlock_irqrestore(&clk_lock, flags); -} -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - if (!clk) - return 0; - - return clk->rate_hz; -} -EXPORT_SYMBOL(clk_get_rate); - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - unsigned long actual; - unsigned long rate_hz; - - if (!clk) - return -EINVAL; - - if (!clk_is_programmable(clk)) - return -EINVAL; - - if (clk->use_cnt) - return -EBUSY; - - spin_lock_irqsave(&clk_lock, flags); - actual = clk->parent->rate_hz; - rate_hz = min(actual, rate); - spin_unlock_irqrestore(&clk_lock, flags); - - return rate_hz; -} -EXPORT_SYMBOL(clk_round_rate); - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - unsigned long flags; - unsigned long actual; - unsigned long rate_hz; - - if (!clk) - return -EINVAL; - - if (!clk_is_programmable(clk)) - return -EINVAL; - - if (clk->use_cnt) - return -EBUSY; - - spin_lock_irqsave(&clk_lock, flags); - actual = clk->parent->rate_hz; - rate_hz = min(actual, rate); - rate_hz = chipcHw_setClockFrequency(clk->csp_id, rate_hz); - clk->rate_hz = rate_hz; - spin_unlock_irqrestore(&clk_lock, flags); - - return 0; -} -EXPORT_SYMBOL(clk_set_rate); - -struct clk *clk_get_parent(struct clk *clk) -{ - if (!clk) - return NULL; - - return clk->parent; -} -EXPORT_SYMBOL(clk_get_parent); - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - unsigned long flags; - struct clk *old_parent; - - if (!clk || !parent) - return -EINVAL; - - if (!clk_is_primary(parent) || !clk_is_bypassable(clk)) - return -EINVAL; - - /* if more than one user, parent is not allowed */ - if (clk->use_cnt > 1) - return -EBUSY; - - if (clk->parent == parent) - return 0; - - spin_lock_irqsave(&clk_lock, flags); - old_parent = clk->parent; - clk->parent = parent; - if (clk_is_using_xtal(parent)) - clk->mode |= CLK_MODE_XTAL; - else - clk->mode &= (~CLK_MODE_XTAL); - - /* if clock is active */ - if (clk->use_cnt != 0) { - clk->use_cnt--; - /* enable clock with the new parent */ - __clk_enable(clk); - /* disable the old parent */ - __clk_disable(old_parent); - } - spin_unlock_irqrestore(&clk_lock, flags); - - return 0; -} -EXPORT_SYMBOL(clk_set_parent); diff --git a/arch/arm/mach-bcmring/clock.h b/arch/arm/mach-bcmring/clock.h deleted file mode 100644 index 5e0b9813897366ba42fe17401457d920b00b2a2e..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/clock.h +++ /dev/null @@ -1,33 +0,0 @@ -/***************************************************************************** -* Copyright 2001 - 2009 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ -#include - -#define CLK_TYPE_PRIMARY 1 /* primary clock must NOT have a parent */ -#define CLK_TYPE_PLL1 2 /* PPL1 */ -#define CLK_TYPE_PLL2 4 /* PPL2 */ -#define CLK_TYPE_PROGRAMMABLE 8 /* programmable clock rate */ -#define CLK_TYPE_BYPASSABLE 16 /* parent can be changed */ - -#define CLK_MODE_XTAL 1 /* clock source is from crystal */ - -struct clk { - const char *name; /* clock name */ - unsigned int type; /* clock type */ - unsigned int mode; /* current mode */ - volatile int use_bypass; /* indicate if it's in bypass mode */ - chipcHw_CLOCK_e csp_id; /* clock ID for CSP CHIPC */ - unsigned long rate_hz; /* clock rate in Hz */ - unsigned int use_cnt; /* usage count */ - struct clk *parent; /* parent clock */ -}; diff --git a/arch/arm/mach-bcmring/core.c b/arch/arm/mach-bcmring/core.c deleted file mode 100644 index adbfb1994582ee1352a511501279f5b58c378bfc..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/core.c +++ /dev/null @@ -1,228 +0,0 @@ -/* - * derived from linux/arch/arm/mach-versatile/core.c - * linux/arch/arm/mach-bcmring/core.c - * - * Copyright (C) 1999 - 2003 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* Portions copyright Broadcom 2008 */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include - -#include "clock.h" - -#include -#include -#include -#include - -static AMBA_APB_DEVICE(uartA, "uartA", 0, MM_ADDR_IO_UARTA, {IRQ_UARTA}, NULL); -static AMBA_APB_DEVICE(uartB, "uartB", 0, MM_ADDR_IO_UARTB, {IRQ_UARTB}, NULL); - -static struct clk pll1_clk = { - .name = "PLL1", - .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL1, - .rate_hz = 2000000000, - .use_cnt = 7, -}; - -static struct clk uart_clk = { - .name = "UART", - .type = CLK_TYPE_PROGRAMMABLE, - .csp_id = chipcHw_CLOCK_UART, - .rate_hz = HW_CFG_UART_CLK_HZ, - .parent = &pll1_clk, -}; - -static struct clk dummy_apb_pclk = { - .name = "BUSCLK", - .type = CLK_TYPE_PRIMARY, - .mode = CLK_MODE_XTAL, -}; - -/* Timer 0 - 25 MHz, Timer3 at bus clock rate, typically 150-166 MHz */ -#if defined(CONFIG_ARCH_FPGA11107) -/* fpga cpu/bus are currently 30 times slower so scale frequency as well to */ -/* slow down Linux's sense of time */ -#define TIMER0_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30) -#define TIMER1_FREQUENCY_MHZ (tmrHw_LOW_FREQUENCY_MHZ * 30) -#define TIMER3_FREQUENCY_MHZ (tmrHw_HIGH_FREQUENCY_MHZ * 30) -#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000 * 30) -#else -#define TIMER0_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ -#define TIMER1_FREQUENCY_MHZ tmrHw_LOW_FREQUENCY_MHZ -#define TIMER3_FREQUENCY_MHZ tmrHw_HIGH_FREQUENCY_MHZ -#define TIMER3_FREQUENCY_KHZ (tmrHw_HIGH_FREQUENCY_HZ / 1000) -#endif - -static struct clk sp804_timer012_clk = { - .name = "sp804-timer-0,1,2", - .type = CLK_TYPE_PRIMARY, - .mode = CLK_MODE_XTAL, - .rate_hz = TIMER1_FREQUENCY_MHZ * 1000000, -}; - -static struct clk sp804_timer3_clk = { - .name = "sp804-timer-3", - .type = CLK_TYPE_PRIMARY, - .mode = CLK_MODE_XTAL, - .rate_hz = TIMER3_FREQUENCY_KHZ * 1000, -}; - -static struct clk_lookup lookups[] = { - { /* Bus clock */ - .con_id = "apb_pclk", - .clk = &dummy_apb_pclk, - }, { /* UART0 */ - .dev_id = "uarta", - .clk = &uart_clk, - }, { /* UART1 */ - .dev_id = "uartb", - .clk = &uart_clk, - }, { /* SP804 timer 0 */ - .dev_id = "sp804", - .con_id = "timer0", - .clk = &sp804_timer012_clk, - }, { /* SP804 timer 1 */ - .dev_id = "sp804", - .con_id = "timer1", - .clk = &sp804_timer012_clk, - }, { /* SP804 timer 3 */ - .dev_id = "sp804", - .con_id = "timer3", - .clk = &sp804_timer3_clk, - } -}; - -static struct amba_device *amba_devs[] __initdata = { - &uartA_device, - &uartB_device, -}; - -void __init bcmring_amba_init(void) -{ - int i; - u32 bus_clock; - -/* Linux is run initially in non-secure mode. Secure peripherals */ -/* generate FIQ, and must be handled in secure mode. Until we have */ -/* a linux security monitor implementation, keep everything in */ -/* non-secure mode. */ - chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_SPU); - secHw_setUnsecure(secHw_BLK_MASK_CHIP_CONTROL | - secHw_BLK_MASK_KEY_SCAN | - secHw_BLK_MASK_TOUCH_SCREEN | - secHw_BLK_MASK_UART0 | - secHw_BLK_MASK_UART1 | - secHw_BLK_MASK_WATCHDOG | - secHw_BLK_MASK_SPUM | - secHw_BLK_MASK_DDR2 | - secHw_BLK_MASK_SPU | - secHw_BLK_MASK_PKA | - secHw_BLK_MASK_RNG | - secHw_BLK_MASK_RTC | - secHw_BLK_MASK_OTP | - secHw_BLK_MASK_BOOT | - secHw_BLK_MASK_MPU | - secHw_BLK_MASK_TZCTRL | secHw_BLK_MASK_INTR); - - /* Only the devices attached to the AMBA bus are enabled just before the bus is */ - /* scanned and the drivers are loaded. The clocks need to be on for the AMBA bus */ - /* driver to access these blocks. The bus is probed, and the drivers are loaded. */ - /* FIXME Need to remove enable of PIF once CLCD clock enable used properly in FPGA. */ - bus_clock = chipcHw_REG_BUS_CLOCK_GE - | chipcHw_REG_BUS_CLOCK_SDIO0 | chipcHw_REG_BUS_CLOCK_SDIO1; - - chipcHw_busInterfaceClockEnable(bus_clock); - - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } -} - -/* - * Where is the timer (VA)? - */ -#define TIMER0_VA_BASE ((void __iomem *)MM_IO_BASE_TMR) -#define TIMER1_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x20)) -#define TIMER2_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x40)) -#define TIMER3_VA_BASE ((void __iomem *)(MM_IO_BASE_TMR + 0x60)) - -static int __init bcmring_clocksource_init(void) -{ - /* setup timer1 as free-running clocksource */ - sp804_clocksource_init(TIMER1_VA_BASE, "timer1"); - - /* setup timer3 as free-running clocksource */ - sp804_clocksource_init(TIMER3_VA_BASE, "timer3"); - - return 0; -} - -/* - * Set up timer interrupt, and return the current time in seconds. - */ -void __init bcmring_init_timer(void) -{ - printk(KERN_INFO "bcmring_init_timer\n"); - /* - * Initialise to a known state (all timers off) - */ - writel(0, TIMER0_VA_BASE + TIMER_CTRL); - writel(0, TIMER1_VA_BASE + TIMER_CTRL); - writel(0, TIMER2_VA_BASE + TIMER_CTRL); - writel(0, TIMER3_VA_BASE + TIMER_CTRL); - - /* - * Make irqs happen for the system timer - */ - bcmring_clocksource_init(); - - sp804_clockevents_init(TIMER0_VA_BASE, IRQ_TIMER0, "timer0"); -} - -struct sys_timer bcmring_timer = { - .init = bcmring_init_timer, -}; - -void __init bcmring_init_early(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -} diff --git a/arch/arm/mach-bcmring/core.h b/arch/arm/mach-bcmring/core.h deleted file mode 100644 index e0e02c48f9b10299d2a96e5f05074de5c2cfce89..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/core.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * linux/arch/arm/mach-versatile/core.h - * - * Copyright (C) 2004 ARM Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -/* Portions copyright Broadcom 2008 */ -#ifndef __ASM_ARCH_BCMRING_H -#define __ASM_ARCH_BCMRING_H - -void __init bcmring_amba_init(void); -void __init bcmring_map_io(void); -void __init bcmring_init_irq(void); -void __init bcmring_init_early(void); - -extern struct sys_timer bcmring_timer; -#endif diff --git a/arch/arm/mach-bcmring/csp/Makefile b/arch/arm/mach-bcmring/csp/Makefile deleted file mode 100644 index 648c0377530e5514c4b435c34eda06f4876032be..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/csp/Makefile +++ /dev/null @@ -1,3 +0,0 @@ -obj-y += dmac/ -obj-y += tmr/ -obj-y += chipc/ diff --git a/arch/arm/mach-bcmring/csp/chipc/Makefile b/arch/arm/mach-bcmring/csp/chipc/Makefile deleted file mode 100644 index 673952768ee59003de6f7bafd13035f9bb3cc065..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/csp/chipc/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y += chipcHw.o chipcHw_str.o chipcHw_reset.o chipcHw_init.o diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw.c deleted file mode 100644 index 96273ff349562b58ef62c1840d1fa4ac945d21d8..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw.c +++ /dev/null @@ -1,776 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file chipcHw.c -* -* @brief Low level Various CHIP clock controlling routines -* -* @note -* -* These routines provide basic clock controlling functionality only. -*/ -/****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include -#include - -#include -#include - -#include -#include - -/* ---- Private Constants and Types --------------------------------------- */ - -/* VPM alignment algorithm uses this */ -#define MAX_PHASE_ADJUST_COUNT 0xFFFF /* Max number of times allowed to adjust the phase */ -#define MAX_PHASE_ALIGN_ATTEMPTS 10 /* Max number of attempt to align the phase */ - -/* Local definition of clock type */ -#define PLL_CLOCK 1 /* PLL Clock */ -#define NON_PLL_CLOCK 2 /* Divider clock */ - -static int chipcHw_divide(int num, int denom) - __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Set clock fequency for miscellaneous configurable clocks -* -* This function sets clock frequency -* -* @return Configured clock frequency in hertz -* -*/ -/****************************************************************************/ -chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ - ) { - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; - volatile uint32_t *pDependentClock = (uint32_t *) 0x0; - uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */ - uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */ - uint32_t dependentClockType = 0; - uint32_t vcoHz = 0; - - /* Get VCO frequencies */ - if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { - uint64_t adjustFreq = 0; - - vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); - - /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */ - adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz * - (uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC)); - vcoFreqPll1Hz += (uint32_t) adjustFreq; - } else { - vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); - } - vcoFreqPll2Hz = - chipcHw_XTAL_FREQ_Hz * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); - - switch (clock) { - case chipcHw_CLOCK_DDR: - pPLLReg = &pChipcHw->DDRClock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ARM: - pPLLReg = &pChipcHw->ARMClock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ESW: - pPLLReg = &pChipcHw->ESWClock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_VPM: - pPLLReg = &pChipcHw->VPMClock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ESW125: - pPLLReg = &pChipcHw->ESW125Clock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_UART: - pPLLReg = &pChipcHw->UARTClock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_SDIO0: - pPLLReg = &pChipcHw->SDIO0Clock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_SDIO1: - pPLLReg = &pChipcHw->SDIO1Clock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_SPI: - pPLLReg = &pChipcHw->SPIClock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ETM: - pPLLReg = &pChipcHw->ETMClock; - vcoHz = vcoFreqPll1Hz; - break; - case chipcHw_CLOCK_USB: - pPLLReg = &pChipcHw->USBClock; - vcoHz = vcoFreqPll2Hz; - break; - case chipcHw_CLOCK_LCD: - pPLLReg = &pChipcHw->LCDClock; - vcoHz = vcoFreqPll2Hz; - break; - case chipcHw_CLOCK_APM: - pPLLReg = &pChipcHw->APMClock; - vcoHz = vcoFreqPll2Hz; - break; - case chipcHw_CLOCK_BUS: - pClockCtrl = &pChipcHw->ACLKClock; - pDependentClock = &pChipcHw->ARMClock; - vcoHz = vcoFreqPll1Hz; - dependentClockType = PLL_CLOCK; - break; - case chipcHw_CLOCK_OTP: - pClockCtrl = &pChipcHw->OTPClock; - break; - case chipcHw_CLOCK_I2C: - pClockCtrl = &pChipcHw->I2CClock; - break; - case chipcHw_CLOCK_I2S0: - pClockCtrl = &pChipcHw->I2S0Clock; - break; - case chipcHw_CLOCK_RTBUS: - pClockCtrl = &pChipcHw->RTBUSClock; - pDependentClock = &pChipcHw->ACLKClock; - dependentClockType = NON_PLL_CLOCK; - break; - case chipcHw_CLOCK_APM100: - pClockCtrl = &pChipcHw->APM100Clock; - pDependentClock = &pChipcHw->APMClock; - vcoHz = vcoFreqPll2Hz; - dependentClockType = PLL_CLOCK; - break; - case chipcHw_CLOCK_TSC: - pClockCtrl = &pChipcHw->TSCClock; - break; - case chipcHw_CLOCK_LED: - pClockCtrl = &pChipcHw->LEDClock; - break; - case chipcHw_CLOCK_I2S1: - pClockCtrl = &pChipcHw->I2S1Clock; - break; - } - - if (pPLLReg) { - /* Obtain PLL clock frequency */ - if (*pPLLReg & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { - /* Return crystal clock frequency when bypassed */ - return chipcHw_XTAL_FREQ_Hz; - } else if (clock == chipcHw_CLOCK_DDR) { - /* DDR frequency is configured in PLLDivider register */ - return chipcHw_divide (vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256)); - } else { - /* From chip revision number B0, LCD clock is internally divided by 2 */ - if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) { - vcoHz >>= 1; - } - /* Obtain PLL clock frequency using VCO dividers */ - return chipcHw_divide(vcoHz, ((*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*pPLLReg & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); - } - } else if (pClockCtrl) { - /* Obtain divider clock frequency */ - uint32_t div; - uint32_t freq = 0; - - if (*pClockCtrl & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { - /* Return crystal clock frequency when bypassed */ - return chipcHw_XTAL_FREQ_Hz; - } else if (pDependentClock) { - /* Identify the dependent clock frequency */ - switch (dependentClockType) { - case PLL_CLOCK: - if (*pDependentClock & chipcHw_REG_PLL_CLOCK_BYPASS_SELECT) { - /* Use crystal clock frequency when dependent PLL clock is bypassed */ - freq = chipcHw_XTAL_FREQ_Hz; - } else { - /* Obtain PLL clock frequency using VCO dividers */ - div = *pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK; - freq = div ? chipcHw_divide(vcoHz, div) : 0; - } - break; - case NON_PLL_CLOCK: - if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) { - freq = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS); - } else { - if (*pDependentClock & chipcHw_REG_DIV_CLOCK_BYPASS_SELECT) { - /* Use crystal clock frequency when dependent divider clock is bypassed */ - freq = chipcHw_XTAL_FREQ_Hz; - } else { - /* Obtain divider clock frequency using XTAL dividers */ - div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK; - freq = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, (div ? div : 256)); - } - } - break; - } - } else { - /* Dependent on crystal clock */ - freq = chipcHw_XTAL_FREQ_Hz; - } - - div = *pClockCtrl & chipcHw_REG_DIV_CLOCK_DIV_MASK; - return chipcHw_divide(freq, (div ? div : 256)); - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Set clock fequency for miscellaneous configurable clocks -* -* This function sets clock frequency -* -* @return Configured clock frequency in Hz -* -*/ -/****************************************************************************/ -chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */ - uint32_t freq /* [ IN ] Clock frequency in Hz */ - ) { - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; - volatile uint32_t *pDependentClock = (uint32_t *) 0x0; - uint32_t vcoFreqPll1Hz = 0; /* Effective VCO frequency for PLL1 in Hz */ - uint32_t desVcoFreqPll1Hz = 0; /* Desired VCO frequency for PLL1 in Hz */ - uint32_t vcoFreqPll2Hz = 0; /* Effective VCO frequency for PLL2 in Hz */ - uint32_t dependentClockType = 0; - uint32_t vcoHz = 0; - uint32_t desVcoHz = 0; - - /* Get VCO frequencies */ - if ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { - uint64_t adjustFreq = 0; - - vcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); - - /* Adjusted frequency due to chipcHw_REG_PLL_DIVIDER_NDIV_f_SS */ - adjustFreq = (uint64_t) chipcHw_XTAL_FREQ_Hz * - (uint64_t) chipcHw_REG_PLL_DIVIDER_NDIV_f_SS * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, (chipcHw_REG_PLL_PREDIVIDER_P2 * (uint64_t) chipcHw_REG_PLL_DIVIDER_FRAC)); - vcoFreqPll1Hz += (uint32_t) adjustFreq; - - /* Desired VCO frequency */ - desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - (((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) + 1); - } else { - vcoFreqPll1Hz = desVcoFreqPll1Hz = chipcHw_XTAL_FREQ_Hz * - chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); - } - vcoFreqPll2Hz = chipcHw_XTAL_FREQ_Hz * chipcHw_divide(chipcHw_REG_PLL_PREDIVIDER_P1, chipcHw_REG_PLL_PREDIVIDER_P2) * - ((pChipcHw->PLLPreDivider2 & chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK) >> - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT); - - switch (clock) { - case chipcHw_CLOCK_DDR: - /* Configure the DDR_ctrl:BUS ratio settings */ - { - REG_LOCAL_IRQ_SAVE; - /* Dvide DDR_phy by two to obtain DDR_ctrl clock */ - pChipcHw->DDRClock = (pChipcHw->DDRClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((((freq / 2) / chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) - << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT); - REG_LOCAL_IRQ_RESTORE; - } - pPLLReg = &pChipcHw->DDRClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ARM: - pPLLReg = &pChipcHw->ARMClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ESW: - pPLLReg = &pChipcHw->ESWClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_VPM: - /* Configure the VPM:BUS ratio settings */ - { - REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK) | ((chipcHw_divide (freq, chipcHw_getClockFrequency(chipcHw_CLOCK_BUS)) - 1) - << chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT); - REG_LOCAL_IRQ_RESTORE; - } - pPLLReg = &pChipcHw->VPMClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ESW125: - pPLLReg = &pChipcHw->ESW125Clock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_UART: - pPLLReg = &pChipcHw->UARTClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_SDIO0: - pPLLReg = &pChipcHw->SDIO0Clock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_SDIO1: - pPLLReg = &pChipcHw->SDIO1Clock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_SPI: - pPLLReg = &pChipcHw->SPIClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_ETM: - pPLLReg = &pChipcHw->ETMClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - break; - case chipcHw_CLOCK_USB: - pPLLReg = &pChipcHw->USBClock; - vcoHz = vcoFreqPll2Hz; - desVcoHz = vcoFreqPll2Hz; - break; - case chipcHw_CLOCK_LCD: - pPLLReg = &pChipcHw->LCDClock; - vcoHz = vcoFreqPll2Hz; - desVcoHz = vcoFreqPll2Hz; - break; - case chipcHw_CLOCK_APM: - pPLLReg = &pChipcHw->APMClock; - vcoHz = vcoFreqPll2Hz; - desVcoHz = vcoFreqPll2Hz; - break; - case chipcHw_CLOCK_BUS: - pClockCtrl = &pChipcHw->ACLKClock; - pDependentClock = &pChipcHw->ARMClock; - vcoHz = vcoFreqPll1Hz; - desVcoHz = desVcoFreqPll1Hz; - dependentClockType = PLL_CLOCK; - break; - case chipcHw_CLOCK_OTP: - pClockCtrl = &pChipcHw->OTPClock; - break; - case chipcHw_CLOCK_I2C: - pClockCtrl = &pChipcHw->I2CClock; - break; - case chipcHw_CLOCK_I2S0: - pClockCtrl = &pChipcHw->I2S0Clock; - break; - case chipcHw_CLOCK_RTBUS: - pClockCtrl = &pChipcHw->RTBUSClock; - pDependentClock = &pChipcHw->ACLKClock; - dependentClockType = NON_PLL_CLOCK; - break; - case chipcHw_CLOCK_APM100: - pClockCtrl = &pChipcHw->APM100Clock; - pDependentClock = &pChipcHw->APMClock; - vcoHz = vcoFreqPll2Hz; - desVcoHz = vcoFreqPll2Hz; - dependentClockType = PLL_CLOCK; - break; - case chipcHw_CLOCK_TSC: - pClockCtrl = &pChipcHw->TSCClock; - break; - case chipcHw_CLOCK_LED: - pClockCtrl = &pChipcHw->LEDClock; - break; - case chipcHw_CLOCK_I2S1: - pClockCtrl = &pChipcHw->I2S1Clock; - break; - } - - if (pPLLReg) { - /* Select XTAL as bypass source */ - reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_SOURCE_GPIO); - reg32_modify_or(pPLLReg, chipcHw_REG_PLL_CLOCK_BYPASS_SELECT); - /* For DDR settings use only the PLL divider clock */ - if (pPLLReg == &pChipcHw->DDRClock) { - /* Set M1DIV for PLL1, which controls the DDR clock */ - reg32_write(&pChipcHw->PLLDivider, (pChipcHw->PLLDivider & 0x00FFFFFF) | ((chipcHw_REG_PLL_DIVIDER_MDIV (desVcoHz, freq)) << 24)); - /* Calculate expected frequency */ - freq = chipcHw_divide(vcoHz, (((pChipcHw->PLLDivider & 0xFF000000) >> 24) ? ((pChipcHw->PLLDivider & 0xFF000000) >> 24) : 256)); - } else { - /* From chip revision number B0, LCD clock is internally divided by 2 */ - if ((pPLLReg == &pChipcHw->LCDClock) && (chipcHw_getChipRevisionNumber() != chipcHw_REV_NUMBER_A0)) { - desVcoHz >>= 1; - vcoHz >>= 1; - } - /* Set MDIV to change the frequency */ - reg32_modify_and(pPLLReg, ~(chipcHw_REG_PLL_CLOCK_MDIV_MASK)); - reg32_modify_or(pPLLReg, chipcHw_REG_PLL_DIVIDER_MDIV(desVcoHz, freq)); - /* Calculate expected frequency */ - freq = chipcHw_divide(vcoHz, ((*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) ? (*(pPLLReg) & chipcHw_REG_PLL_CLOCK_MDIV_MASK) : 256)); - } - /* Wait for for atleast 200ns as per the protocol to change frequency */ - udelay(1); - /* Do not bypass */ - reg32_modify_and(pPLLReg, ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT); - /* Return the configured frequency */ - return freq; - } else if (pClockCtrl) { - uint32_t divider = 0; - - /* Divider clock should not be bypassed */ - reg32_modify_and(pClockCtrl, - ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT); - - /* Identify the clock source */ - if (pDependentClock) { - switch (dependentClockType) { - case PLL_CLOCK: - divider = chipcHw_divide(chipcHw_divide (desVcoHz, (*pDependentClock & chipcHw_REG_PLL_CLOCK_MDIV_MASK)), freq); - break; - case NON_PLL_CLOCK: - { - uint32_t sourceClock = 0; - - if (pDependentClock == (uint32_t *) &pChipcHw->ACLKClock) { - sourceClock = chipcHw_getClockFrequency (chipcHw_CLOCK_BUS); - } else { - uint32_t div = *pDependentClock & chipcHw_REG_DIV_CLOCK_DIV_MASK; - sourceClock = chipcHw_divide (chipcHw_XTAL_FREQ_Hz, ((div) ? div : 256)); - } - divider = chipcHw_divide(sourceClock, freq); - } - break; - } - } else { - divider = chipcHw_divide(chipcHw_XTAL_FREQ_Hz, freq); - } - - if (divider) { - REG_LOCAL_IRQ_SAVE; - /* Set the divider to obtain the required frequency */ - *pClockCtrl = (*pClockCtrl & (~chipcHw_REG_DIV_CLOCK_DIV_MASK)) | (((divider > 256) ? chipcHw_REG_DIV_CLOCK_DIV_256 : divider) & chipcHw_REG_DIV_CLOCK_DIV_MASK); - REG_LOCAL_IRQ_RESTORE; - return freq; - } - } - - return 0; -} - -EXPORT_SYMBOL(chipcHw_setClockFrequency); - -/****************************************************************************/ -/** -* @brief Set VPM clock in sync with BUS clock for Chip Rev #A0 -* -* This function does the phase adjustment between VPM and BUS clock -* -* @return >= 0 : On success (# of adjustment required) -* -1 : On failure -* -*/ -/****************************************************************************/ -static int vpmPhaseAlignA0(void) -{ - uint32_t phaseControl; - uint32_t phaseValue; - uint32_t prevPhaseComp; - int iter = 0; - int adjustCount = 0; - int count = 0; - - for (iter = 0; (iter < MAX_PHASE_ALIGN_ATTEMPTS) && (adjustCount < MAX_PHASE_ADJUST_COUNT); iter++) { - phaseControl = (pChipcHw->VPMClock & chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT; - phaseValue = 0; - prevPhaseComp = 0; - - /* Step 1: Look for falling PH_COMP transition */ - - /* Read the contents of VPM Clock resgister */ - phaseValue = pChipcHw->VPMClock; - do { - /* Store previous value of phase comparator */ - prevPhaseComp = phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP; - /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); - /* Wait atleast 20 ns */ - udelay(1); - /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - /* Read the contents of VPM Clock resgister. */ - phaseValue = pChipcHw->VPMClock; - - if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) { - phaseControl = (0x3F & (phaseControl - 1)); - } else { - /* Increment to the Phase count value for next write, if Phase is not stable. */ - phaseControl = (0x3F & (phaseControl + 1)); - } - /* Count number of adjustment made */ - adjustCount++; - } while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || /* Look for a transition */ - ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && /* Look for a falling edge */ - (adjustCount < MAX_PHASE_ADJUST_COUNT) /* Do not exceed the limit while trying */ - ); - - if (adjustCount >= MAX_PHASE_ADJUST_COUNT) { - /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */ - return -1; - } - - /* Step 2: Keep moving forward to make sure falling PH_COMP transition was valid */ - - for (count = 0; (count < 5) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) { - phaseControl = (0x3F & (phaseControl + 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); - /* Wait atleast 20 ns */ - udelay(1); - /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; - /* Count number of adjustment made */ - adjustCount++; - } - - if (adjustCount >= MAX_PHASE_ADJUST_COUNT) { - /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */ - return -1; - } - - if (count != 5) { - /* Detected false transition */ - continue; - } - - /* Step 3: Keep moving backward to make sure falling PH_COMP transition was stable */ - - for (count = 0; (count < 3) && ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0); count++) { - phaseControl = (0x3F & (phaseControl - 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); - /* Wait atleast 20 ns */ - udelay(1); - /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; - /* Count number of adjustment made */ - adjustCount++; - } - - if (adjustCount >= MAX_PHASE_ADJUST_COUNT) { - /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */ - return -1; - } - - if (count != 3) { - /* Detected noisy transition */ - continue; - } - - /* Step 4: Keep moving backward before the original transition took place. */ - - for (count = 0; (count < 5); count++) { - phaseControl = (0x3F & (phaseControl - 1)); - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); - /* Wait atleast 20 ns */ - udelay(1); - /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - phaseValue = pChipcHw->VPMClock; - /* Count number of adjustment made */ - adjustCount++; - } - - if (adjustCount >= MAX_PHASE_ADJUST_COUNT) { - /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */ - return -1; - } - - if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0) { - /* Detected false transition */ - continue; - } - - /* Step 5: Re discover the valid transition */ - - do { - /* Store previous value of phase comparator */ - prevPhaseComp = phaseValue; - /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); - /* Wait atleast 20 ns */ - udelay(1); - /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= - chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - /* Read the contents of VPM Clock resgister. */ - phaseValue = pChipcHw->VPMClock; - - if ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) == 0x0) { - phaseControl = (0x3F & (phaseControl - 1)); - } else { - /* Increment to the Phase count value for next write, if Phase is not stable. */ - phaseControl = (0x3F & (phaseControl + 1)); - } - - /* Count number of adjustment made */ - adjustCount++; - } while (((prevPhaseComp == (phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP)) || ((phaseValue & chipcHw_REG_PLL_CLOCK_PHASE_COMP) != 0x0)) && (adjustCount < MAX_PHASE_ADJUST_COUNT)); - - if (adjustCount >= MAX_PHASE_ADJUST_COUNT) { - /* Failed to align VPM phase after MAX_PHASE_ADJUST_COUNT tries */ - return -1; - } else { - /* Valid phase must have detected */ - break; - } - } - - /* For VPM Phase should be perfectly aligned. */ - phaseControl = (((pChipcHw->VPMClock >> chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT) - 1) & 0x3F); - { - REG_LOCAL_IRQ_SAVE; - - pChipcHw->VPMClock = (pChipcHw->VPMClock & ~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT); - /* Load new phase value */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - - REG_LOCAL_IRQ_RESTORE; - } - /* Return the status */ - return (int)adjustCount; -} - -/****************************************************************************/ -/** -* @brief Set VPM clock in sync with BUS clock -* -* This function does the phase adjustment between VPM and BUS clock -* -* @return >= 0 : On success (# of adjustment required) -* -1 : On failure -* -*/ -/****************************************************************************/ -int chipcHw_vpmPhaseAlign(void) -{ - - if (chipcHw_getChipRevisionNumber() == chipcHw_REV_NUMBER_A0) { - return vpmPhaseAlignA0(); - } else { - uint32_t phaseControl = chipcHw_getVpmPhaseControl(); - uint32_t phaseValue = 0; - int adjustCount = 0; - - /* Disable VPM access */ - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; - /* Disable HW VPM phase alignment */ - chipcHw_vpmHwPhaseAlignDisable(); - /* Enable SW VPM phase alignment */ - chipcHw_vpmSwPhaseAlignEnable(); - /* Adjust VPM phase */ - while (adjustCount < MAX_PHASE_ADJUST_COUNT) { - phaseValue = chipcHw_getVpmHwPhaseAlignStatus(); - - /* Adjust phase control value */ - if (phaseValue > 0xF) { - /* Increment phase control value */ - phaseControl++; - } else if (phaseValue < 0xF) { - /* Decrement phase control value */ - phaseControl--; - } else { - /* Enable VPM access */ - pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; - /* Return adjust count */ - return adjustCount; - } - /* Change the value of PH_CTRL. */ - reg32_write(&pChipcHw->VPMClock, (pChipcHw->VPMClock & (~chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK)) | (phaseControl << chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT)); - /* Wait atleast 20 ns */ - udelay(1); - /* Toggle the LOAD_CH after phase control is written. */ - pChipcHw->VPMClock ^= chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE; - /* Count adjustment */ - adjustCount++; - } - } - - /* Disable VPM access */ - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE; - return -1; -} - -/****************************************************************************/ -/** -* @brief Local Divide function -* -* This function does the divide -* -* @return divide value -* -*/ -/****************************************************************************/ -static int chipcHw_divide(int num, int denom) -{ - int r; - int t = 1; - - /* Shift denom and t up to the largest value to optimize algorithm */ - /* t contains the units of each divide */ - while ((denom & 0x40000000) == 0) { /* fails if denom=0 */ - denom = denom << 1; - t = t << 1; - } - - /* Initialize the result */ - r = 0; - - do { - /* Determine if there exists a positive remainder */ - if ((num - denom) >= 0) { - /* Accumlate t to the result and calculate a new remainder */ - num = num - denom; - r = r + t; - } - /* Continue to shift denom and shift t down to 0 */ - denom = denom >> 1; - t = t >> 1; - } while (t != 0); - - return r; -} diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c deleted file mode 100644 index 367df75d4bb332407f01bfe502f48b450be30401..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_init.c +++ /dev/null @@ -1,293 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file chipcHw_init.c -* -* @brief Low level CHIPC PLL configuration functions -* -* @note -* -* These routines provide basic PLL controlling functionality only. -*/ -/****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include -#include - -#include -#include - -#include -#include -/* ---- Private Constants and Types --------------------------------------- */ - -/* - Calculation for NDIV_i to obtain VCO frequency - ----------------------------------------------- - - Freq_vco = Freq_ref * (P2 / P1) * (PLL_NDIV_i + PLL_NDIV_f) - for Freq_vco = VCO_FREQ_MHz - Freq_ref = chipcHw_XTAL_FREQ_Hz - PLL_P1 = PLL_P2 = 1 - and - PLL_NDIV_f = 0 - - We get: - PLL_NDIV_i = Freq_vco / Freq_ref = VCO_FREQ_MHz / chipcHw_XTAL_FREQ_Hz - - Calculation for PLL MDIV to obtain frequency Freq_x for channel x - ----------------------------------------------------------------- - Freq_x = chipcHw_XTAL_FREQ_Hz * PLL_NDIV_i / PLL_MDIV_x = VCO_FREQ_MHz / PLL_MDIV_x - - PLL_MDIV_x = VCO_FREQ_MHz / Freq_x -*/ - -/* ---- Private Variables ------------------------------------------------- */ -/****************************************************************************/ -/** -* @brief Initializes the PLL2 -* -* This function initializes the PLL2 -* -*/ -/****************************************************************************/ -void chipcHw_pll2Enable(uint32_t vcoFreqHz) -{ - uint32_t pllPreDivider2 = 0; - - { - REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig2 = - chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET; - - pllPreDivider2 = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN | - chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER | - (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) << - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) | - (chipcHw_REG_PLL_PREDIVIDER_P1 << - chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) | - (chipcHw_REG_PLL_PREDIVIDER_P2 << - chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT); - - /* Enable CHIPC registers to control the PLL */ - pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE; - - /* Set pre divider to get desired VCO frequency */ - pChipcHw->PLLPreDivider2 = pllPreDivider2; - /* Set NDIV Frac */ - pChipcHw->PLLDivider2 = chipcHw_REG_PLL_DIVIDER_NDIV_f; - - /* This has to be removed once the default values are fixed for PLL2. */ - pChipcHw->PLLControl12 = 0x38000700; - pChipcHw->PLLControl22 = 0x00000015; - - /* Reset PLL2 */ - if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) { - pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; - } else { - pChipcHw->PLLConfig2 = chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_VCO_800_1600 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; - } - REG_LOCAL_IRQ_RESTORE; - } - - /* Insert certain amount of delay before deasserting ARESET. */ - udelay(1); - - { - REG_LOCAL_IRQ_SAVE; - /* Remove analog reset and Power on the PLL */ - pChipcHw->PLLConfig2 &= - ~(chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_POWER_DOWN); - - REG_LOCAL_IRQ_RESTORE; - - } - - /* Wait until PLL is locked */ - while (!(pChipcHw->PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED)) - ; - - { - REG_LOCAL_IRQ_SAVE; - /* Remove digital reset */ - pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_D_RESET; - - REG_LOCAL_IRQ_RESTORE; - } -} - -EXPORT_SYMBOL(chipcHw_pll2Enable); - -/****************************************************************************/ -/** -* @brief Initializes the PLL1 -* -* This function initializes the PLL1 -* -*/ -/****************************************************************************/ -void chipcHw_pll1Enable(uint32_t vcoFreqHz, chipcHw_SPREAD_SPECTRUM_e ssSupport) -{ - uint32_t pllPreDivider = 0; - - { - REG_LOCAL_IRQ_SAVE; - - pChipcHw->PLLConfig = - chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET; - /* Setting VCO frequency */ - if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) { - pllPreDivider = - chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 | - ((chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) - - 1) << chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) | - (chipcHw_REG_PLL_PREDIVIDER_P1 << - chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) | - (chipcHw_REG_PLL_PREDIVIDER_P2 << - chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT); - } else { - pllPreDivider = chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN | - chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER | - (chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vcoFreqHz) << - chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT) | - (chipcHw_REG_PLL_PREDIVIDER_P1 << - chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT) | - (chipcHw_REG_PLL_PREDIVIDER_P2 << - chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT); - } - - /* Enable CHIPC registers to control the PLL */ - pChipcHw->PLLStatus |= chipcHw_REG_PLL_STATUS_CONTROL_ENABLE; - - /* Set pre divider to get desired VCO frequency */ - pChipcHw->PLLPreDivider = pllPreDivider; - /* Set NDIV Frac */ - if (ssSupport == chipcHw_SPREAD_SPECTRUM_ALLOW) { - pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV | - chipcHw_REG_PLL_DIVIDER_NDIV_f_SS; - } else { - pChipcHw->PLLDivider = chipcHw_REG_PLL_DIVIDER_M1DIV | - chipcHw_REG_PLL_DIVIDER_NDIV_f; - } - - /* Reset PLL1 */ - if (vcoFreqHz > chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ) { - pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_VCO_1601_3200 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; - } else { - pChipcHw->PLLConfig = chipcHw_REG_PLL_CONFIG_D_RESET | - chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_VCO_800_1600 | - chipcHw_REG_PLL_CONFIG_POWER_DOWN; - } - - REG_LOCAL_IRQ_RESTORE; - - /* Insert certain amount of delay before deasserting ARESET. */ - udelay(1); - - { - REG_LOCAL_IRQ_SAVE; - /* Remove analog reset and Power on the PLL */ - pChipcHw->PLLConfig &= - ~(chipcHw_REG_PLL_CONFIG_A_RESET | - chipcHw_REG_PLL_CONFIG_POWER_DOWN); - REG_LOCAL_IRQ_RESTORE; - } - - /* Wait until PLL is locked */ - while (!(pChipcHw->PLLStatus & chipcHw_REG_PLL_STATUS_LOCKED) - || !(pChipcHw-> - PLLStatus2 & chipcHw_REG_PLL_STATUS_LOCKED)) - ; - - /* Remove digital reset */ - { - REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_D_RESET; - REG_LOCAL_IRQ_RESTORE; - } - } -} - -EXPORT_SYMBOL(chipcHw_pll1Enable); - -/****************************************************************************/ -/** -* @brief Initializes the chipc module -* -* This function initializes the PLLs and core system clocks -* -*/ -/****************************************************************************/ - -void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initialization parameter */ - ) { -#if !(defined(__KERNEL__) && !defined(STANDALONE)) - delay_init(); -#endif - - /* Do not program PLL, when warm reset */ - if (!(chipcHw_getStickyBits() & chipcHw_REG_STICKY_CHIP_WARM_RESET)) { - chipcHw_pll1Enable(initParam->pllVcoFreqHz, - initParam->ssSupport); - chipcHw_pll2Enable(initParam->pll2VcoFreqHz); - } else { - /* Clear sticky bits */ - chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_WARM_RESET); - } - /* Clear sticky bits */ - chipcHw_clearStickyBits(chipcHw_REG_STICKY_CHIP_SOFT_RESET); - - /* Before configuring the ARM clock, atleast we need to make sure BUS clock maintains the proper ratio with ARM clock */ - pChipcHw->ACLKClock = - (pChipcHw-> - ACLKClock & ~chipcHw_REG_ACLKClock_CLK_DIV_MASK) | (initParam-> - armBusRatio & - chipcHw_REG_ACLKClock_CLK_DIV_MASK); - - /* Set various core component frequencies. The order in which this is done is important for some. */ - /* The RTBUS (DDR PHY) is derived from the BUS, and the BUS from the ARM, and VPM needs to know BUS */ - /* frequency to find its ratio with the BUS. Hence we must set the ARM first, followed by the BUS, */ - /* then VPM and RTBUS. */ - - chipcHw_setClockFrequency(chipcHw_CLOCK_ARM, - initParam->busClockFreqHz * - initParam->armBusRatio); - chipcHw_setClockFrequency(chipcHw_CLOCK_BUS, initParam->busClockFreqHz); - chipcHw_setClockFrequency(chipcHw_CLOCK_VPM, - initParam->busClockFreqHz * - initParam->vpmBusRatio); - chipcHw_setClockFrequency(chipcHw_CLOCK_DDR, - initParam->busClockFreqHz * - initParam->ddrBusRatio); - chipcHw_setClockFrequency(chipcHw_CLOCK_RTBUS, - initParam->busClockFreqHz / 2); -} diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c deleted file mode 100644 index 2671d8896bbb5202e788218de8ad3ec0f963f119..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_reset.c +++ /dev/null @@ -1,124 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ -#include -#include -#include -#include -#include - -/* ---- Private Constants and Types --------------------------------------- */ -/* ---- Private Variables ------------------------------------------------- */ -void chipcHw_reset_run_from_aram(void); - -typedef void (*RUNFUNC) (void); - -/****************************************************************************/ -/** -* @brief warmReset -* -* @note warmReset configures the clocks which are not reset back to the state -* required to execute on reset. To do so we need to copy the code into internal -* memory to change the ARM clock while we are not executing from DDR. -*/ -/****************************************************************************/ -void chipcHw_reset(uint32_t mask) -{ - int i = 0; - RUNFUNC runFunc = (RUNFUNC) (unsigned long)MM_ADDR_IO_ARAM; - - /* Disable all interrupts */ - intcHw_irq_disable(INTCHW_INTC0, 0xffffffff); - intcHw_irq_disable(INTCHW_INTC1, 0xffffffff); - intcHw_irq_disable(INTCHW_SINTC, 0xffffffff); - - { - REG_LOCAL_IRQ_SAVE; - if (mask & chipcHw_REG_SOFT_RESET_CHIP_SOFT) { - chipcHw_softReset(chipcHw_REG_SOFT_RESET_CHIP_SOFT); - } - /* Bypass the PLL clocks before reboot */ - pChipcHw->UARTClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT; - pChipcHw->SPIClock |= chipcHw_REG_PLL_CLOCK_BYPASS_SELECT; - - /* Copy the chipcHw_warmReset_run_from_aram function into ARAM */ - do { - ((uint32_t *) MM_IO_BASE_ARAM)[i] = - ((uint32_t *) &chipcHw_reset_run_from_aram)[i]; - i++; - } while (((uint32_t *) MM_IO_BASE_ARAM)[i - 1] != 0xe1a0f00f); /* 0xe1a0f00f == asm ("mov r15, r15"); */ - - CSP_CACHE_FLUSH_ALL; - - /* run the function from ARAM */ - runFunc(); - - /* Code will never get here, but include it to balance REG_LOCAL_IRQ_SAVE above */ - REG_LOCAL_IRQ_RESTORE; - } -} - -/* This function must run from internal memory */ -void chipcHw_reset_run_from_aram(void) -{ -/* Make sure, pipeline is filled with instructions coming from ARAM */ -__asm (" nop \n\t" - " nop \n\t" -#if defined(__KERNEL__) && !defined(STANDALONE) - " MRC p15,#0x0,r0,c1,c0,#0 \n\t" - " BIC r0,r0,#0xd \n\t" - " MCR p15,#0x0,r0,c1,c0,#0 \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" -#endif - " nop \n\t" - " nop \n\t" -/* Bypass the ARM clock and switch to XTAL clock */ - " MOV r2,#0x80000000 \n\t" - " LDR r3,[r2,#8] \n\t" - " ORR r3,r3,#0x20000 \n\t" - " STR r3,[r2,#8] \n\t" - - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" - " nop \n\t" -/* Issue reset */ - " MOV r3,#0x2 \n\t" - " STR r3,[r2,#0x80] \n\t" -/* End here */ - " MOV pc,pc \n\t"); -/* 0xe1a0f00f == asm ("mov r15, r15"); */ -} diff --git a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c b/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c deleted file mode 100644 index 54ad964fe94ca4146922921d4e6a5fc40b00ff2d..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/csp/chipc/chipcHw_str.c +++ /dev/null @@ -1,64 +0,0 @@ -/***************************************************************************** -* Copyright 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ -/****************************************************************************/ -/** -* @file chipcHw_str.c -* -* @brief Contains strings which are useful to linux and csp -* -* @note -*/ -/****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ - -#include - -/* ---- Private Constants and Types --------------------------------------- */ - -static const char *gMuxStr[] = { - "GPIO", /* 0 */ - "KeyPad", /* 1 */ - "I2C-Host", /* 2 */ - "SPI", /* 3 */ - "Uart", /* 4 */ - "LED-Mtx-P", /* 5 */ - "LED-Mtx-S", /* 6 */ - "SDIO-0", /* 7 */ - "SDIO-1", /* 8 */ - "PCM", /* 9 */ - "I2S", /* 10 */ - "ETM", /* 11 */ - "Debug", /* 12 */ - "Misc", /* 13 */ - "0xE", /* 14 */ - "0xF", /* 15 */ -}; - -/****************************************************************************/ -/** -* @brief Retrieves a string representation of the mux setting for a pin. -* -* @return Pointer to a character string. -*/ -/****************************************************************************/ - -const char *chipcHw_getGpioPinFunctionStr(int pin) -{ - if ((pin < 0) || (pin >= chipcHw_GPIO_COUNT)) { - return ""; - } - - return gMuxStr[chipcHw_getGpioPinFunction(pin)]; -} diff --git a/arch/arm/mach-bcmring/csp/dmac/Makefile b/arch/arm/mach-bcmring/csp/dmac/Makefile deleted file mode 100644 index fb1104fe56b228108c5b110d74282f6a90523beb..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/csp/dmac/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y += dmacHw.o dmacHw_extra.o \ No newline at end of file diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw.c deleted file mode 100644 index 6b9be2e98e510967293097b69f1eba1965462cc5..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw.c +++ /dev/null @@ -1,917 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dmacHw.c -* -* @brief Low level DMA controller driver routines -* -* @note -* -* These routines provide basic DMA functionality only. -*/ -/****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ -#include -#include -#include - -#include -#include -#include -#include - -/* ---- External Function Prototypes ------------------------------------- */ - -/* Allocate DMA control blocks */ -dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT]; - -uint32_t dmaChannelCount_0 = dmacHw_MAX_CHANNEL_COUNT / 2; -uint32_t dmaChannelCount_1 = dmacHw_MAX_CHANNEL_COUNT / 2; - -/****************************************************************************/ -/** -* @brief Get maximum FIFO for a DMA channel -* -* @return Maximum allowable FIFO size -* -* -*/ -/****************************************************************************/ -static uint32_t GetFifoSize(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ) { - uint32_t val = 0; - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - dmacHw_MISC_t *pMiscReg = - (dmacHw_MISC_t *) dmacHw_REG_MISC_BASE(pCblk->module); - - switch (pCblk->channel) { - case 0: - val = (pMiscReg->CompParm2.lo & 0x70000000) >> 28; - break; - case 1: - val = (pMiscReg->CompParm3.hi & 0x70000000) >> 28; - break; - case 2: - val = (pMiscReg->CompParm3.lo & 0x70000000) >> 28; - break; - case 3: - val = (pMiscReg->CompParm4.hi & 0x70000000) >> 28; - break; - case 4: - val = (pMiscReg->CompParm4.lo & 0x70000000) >> 28; - break; - case 5: - val = (pMiscReg->CompParm5.hi & 0x70000000) >> 28; - break; - case 6: - val = (pMiscReg->CompParm5.lo & 0x70000000) >> 28; - break; - case 7: - val = (pMiscReg->CompParm6.hi & 0x70000000) >> 28; - break; - } - - if (val <= 0x4) { - return 8 << val; - } else { - dmacHw_ASSERT(0); - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Program channel register to initiate transfer -* -* @return void -* -* -* @note -* - Descriptor buffer MUST ALWAYS be flushed before calling this function -* - This function should also be called from ISR to program the channel with -* pending descriptors -*/ -/****************************************************************************/ -void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor /* [ IN ] Descriptor buffer */ - ) { - dmacHw_DESC_RING_t *pRing; - dmacHw_DESC_t *pProg; - dmacHw_CBLK_t *pCblk; - - pCblk = dmacHw_HANDLE_TO_CBLK(handle); - pRing = dmacHw_GET_DESC_RING(pDescriptor); - - if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) { - /* Not safe yet to program the channel */ - return; - } - - if (pCblk->varDataStarted) { - if (pCblk->descUpdated) { - pCblk->descUpdated = 0; - pProg = - (dmacHw_DESC_t *) ((uint32_t) - dmacHw_REG_LLP(pCblk->module, - pCblk->channel) + - pRing->virt2PhyOffset); - - /* Load descriptor if not loaded */ - if (!(pProg->ctl.hi & dmacHw_REG_CTL_DONE)) { - dmacHw_SET_SAR(pCblk->module, pCblk->channel, - pProg->sar); - dmacHw_SET_DAR(pCblk->module, pCblk->channel, - pProg->dar); - dmacHw_REG_CTL_LO(pCblk->module, - pCblk->channel) = - pProg->ctl.lo; - dmacHw_REG_CTL_HI(pCblk->module, - pCblk->channel) = - pProg->ctl.hi; - } else if (pProg == (dmacHw_DESC_t *) pRing->pEnd->llp) { - /* Return as end descriptor is processed */ - return; - } else { - dmacHw_ASSERT(0); - } - } else { - return; - } - } else { - if (pConfig->transferMode == dmacHw_TRANSFER_MODE_PERIODIC) { - /* Do not make a single chain, rather process one descriptor at a time */ - pProg = pRing->pHead; - /* Point to the next descriptor for next iteration */ - dmacHw_NEXT_DESC(pRing, pHead); - } else { - /* Return if no more pending descriptor */ - if (pRing->pEnd == NULL) { - return; - } - - pProg = pRing->pProg; - if (pConfig->transferMode == - dmacHw_TRANSFER_MODE_CONTINUOUS) { - /* Make sure a complete ring can be formed */ - dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pEnd-> - llp == pRing->pProg); - /* Make sure pProg pointing to the pHead */ - dmacHw_ASSERT((dmacHw_DESC_t *) pRing->pProg == - pRing->pHead); - /* Make a complete ring */ - do { - pRing->pProg->ctl.lo |= - (dmacHw_REG_CTL_LLP_DST_EN | - dmacHw_REG_CTL_LLP_SRC_EN); - pRing->pProg = - (dmacHw_DESC_t *) pRing->pProg->llp; - } while (pRing->pProg != pRing->pHead); - } else { - /* Make a single long chain */ - while (pRing->pProg != pRing->pEnd) { - pRing->pProg->ctl.lo |= - (dmacHw_REG_CTL_LLP_DST_EN | - dmacHw_REG_CTL_LLP_SRC_EN); - pRing->pProg = - (dmacHw_DESC_t *) pRing->pProg->llp; - } - } - } - - /* Program the channel registers */ - dmacHw_SET_SAR(pCblk->module, pCblk->channel, pProg->sar); - dmacHw_SET_DAR(pCblk->module, pCblk->channel, pProg->dar); - dmacHw_SET_LLP(pCblk->module, pCblk->channel, - (uint32_t) pProg - pRing->virt2PhyOffset); - dmacHw_REG_CTL_LO(pCblk->module, pCblk->channel) = - pProg->ctl.lo; - dmacHw_REG_CTL_HI(pCblk->module, pCblk->channel) = - pProg->ctl.hi; - if (pRing->pEnd) { - /* Remember the descriptor to use next */ - pRing->pProg = (dmacHw_DESC_t *) pRing->pEnd->llp; - } - /* Indicate no more pending descriptor */ - pRing->pEnd = (dmacHw_DESC_t *) NULL; - } - /* Start DMA operation */ - dmacHw_DMA_START(pCblk->module, pCblk->channel); -} - -/****************************************************************************/ -/** -* @brief Initializes DMA -* -* This function initializes DMA CSP driver -* -* @note -* Must be called before using any DMA channel -*/ -/****************************************************************************/ -void dmacHw_initDma(void) -{ - - uint32_t i = 0; - - dmaChannelCount_0 = dmacHw_GET_NUM_CHANNEL(0); - dmaChannelCount_1 = dmacHw_GET_NUM_CHANNEL(1); - - /* Enable access to the DMA block */ - chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC0); - chipcHw_busInterfaceClockEnable(chipcHw_REG_BUS_CLOCK_DMAC1); - - if ((dmaChannelCount_0 + dmaChannelCount_1) > dmacHw_MAX_CHANNEL_COUNT) { - dmacHw_ASSERT(0); - } - - memset((void *)dmacHw_gCblk, 0, - sizeof(dmacHw_CBLK_t) * (dmaChannelCount_0 + dmaChannelCount_1)); - for (i = 0; i < dmaChannelCount_0; i++) { - dmacHw_gCblk[i].module = 0; - dmacHw_gCblk[i].channel = i; - } - for (i = 0; i < dmaChannelCount_1; i++) { - dmacHw_gCblk[i + dmaChannelCount_0].module = 1; - dmacHw_gCblk[i + dmaChannelCount_0].channel = i; - } -} - -/****************************************************************************/ -/** -* @brief Exit function for DMA -* -* This function isolates DMA from the system -* -*/ -/****************************************************************************/ -void dmacHw_exitDma(void) -{ - /* Disable access to the DMA block */ - chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC0); - chipcHw_busInterfaceClockDisable(chipcHw_REG_BUS_CLOCK_DMAC1); -} - -/****************************************************************************/ -/** -* @brief Gets a handle to a DMA channel -* -* This function returns a handle, representing a control block of a particular DMA channel -* -* @return -1 - On Failure -* handle - On Success, representing a channel control block -* -* @note -* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro -*/ -/****************************************************************************/ -dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */ - ) { - int idx; - - switch ((channelId >> 8)) { - case 0: - dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_0); - idx = (channelId & 0xff); - break; - case 1: - dmacHw_ASSERT((channelId & 0xff) < dmaChannelCount_1); - idx = dmaChannelCount_0 + (channelId & 0xff); - break; - default: - dmacHw_ASSERT(0); - return (dmacHw_HANDLE_t) -1; - } - - return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[idx]); -} - -/****************************************************************************/ -/** -* @brief Initializes a DMA channel for use -* -* This function initializes and resets a DMA channel for use -* -* @return -1 - On Failure -* 0 - On Success -* -* @note -* None -*/ -/****************************************************************************/ -int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - int module = pCblk->module; - int channel = pCblk->channel; - - /* Reinitialize the control block */ - memset((void *)pCblk, 0, sizeof(dmacHw_CBLK_t)); - pCblk->module = module; - pCblk->channel = channel; - - /* Enable DMA controller */ - dmacHw_DMA_ENABLE(pCblk->module); - /* Reset DMA channel */ - dmacHw_RESET_CONTROL_LO(pCblk->module, pCblk->channel); - dmacHw_RESET_CONTROL_HI(pCblk->module, pCblk->channel); - dmacHw_RESET_CONFIG_LO(pCblk->module, pCblk->channel); - dmacHw_RESET_CONFIG_HI(pCblk->module, pCblk->channel); - - /* Clear all raw interrupt status */ - dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel); - dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel); - dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel); - - /* Mask event specific interrupts */ - dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel); - dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel); - dmacHw_STRAN_INT_DISABLE(pCblk->module, pCblk->channel); - dmacHw_DTRAN_INT_DISABLE(pCblk->module, pCblk->channel); - dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel); - - return 0; -} - -/****************************************************************************/ -/** -* @brief Finds amount of memory required to form a descriptor ring -* -* -* @return Number of bytes required to form a descriptor ring -* -* -*/ -/****************************************************************************/ -uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */ - ) { - /* Need extra 4 byte to ensure 32 bit alignment */ - return (descCnt * sizeof(dmacHw_DESC_t)) + sizeof(dmacHw_DESC_RING_t) + - sizeof(uint32_t); -} - -/****************************************************************************/ -/** -* @brief Initializes descriptor ring -* -* This function will initializes the descriptor ring of a DMA channel -* -* -* @return -1 - On failure -* 0 - On success -* @note -* - "len" parameter should be obtained from "dmacHw_descriptorLen" -* - Descriptor buffer MUST be 32 bit aligned and uncached as it is -* accessed by ARM and DMA -*/ -/****************************************************************************/ -int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */ - uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */ - uint32_t len, /* [ IN ] Size of the pBuf */ - uint32_t num /* [ IN ] Number of descriptor in the ring */ - ) { - uint32_t i; - dmacHw_DESC_RING_t *pRing; - dmacHw_DESC_t *pDesc; - - /* Check the alignment of the descriptor */ - if ((uint32_t) pDescriptorVirt & 0x00000003) { - dmacHw_ASSERT(0); - return -1; - } - - /* Check if enough space has been allocated for descriptor ring */ - if (len < dmacHw_descriptorLen(num)) { - return -1; - } - - pRing = dmacHw_GET_DESC_RING(pDescriptorVirt); - pRing->pHead = - (dmacHw_DESC_t *) ((uint32_t) pRing + sizeof(dmacHw_DESC_RING_t)); - pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead; - pRing->pProg = dmacHw_DESC_INIT; - /* Initialize link item chain, starting from the head */ - pDesc = pRing->pHead; - /* Find the offset between virtual to physical address */ - pRing->virt2PhyOffset = (uint32_t) pDescriptorVirt - descriptorPhyAddr; - - /* Form the descriptor ring */ - for (i = 0; i < num - 1; i++) { - /* Clear link list item */ - memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t)); - /* Point to the next item in the physical address */ - pDesc->llpPhy = (uint32_t) (pDesc + 1) - pRing->virt2PhyOffset; - /* Point to the next item in the virtual address */ - pDesc->llp = (uint32_t) (pDesc + 1); - /* Mark descriptor is ready to use */ - pDesc->ctl.hi = dmacHw_DESC_FREE; - /* Look into next link list item */ - pDesc++; - } - - /* Clear last link list item */ - memset((void *)pDesc, 0, sizeof(dmacHw_DESC_t)); - /* Last item pointing to the first item in the - physical address to complete the ring */ - pDesc->llpPhy = (uint32_t) pRing->pHead - pRing->virt2PhyOffset; - /* Last item pointing to the first item in the - virtual address to complete the ring - */ - pDesc->llp = (uint32_t) pRing->pHead; - /* Mark descriptor is ready to use */ - pDesc->ctl.hi = dmacHw_DESC_FREE; - /* Set the number of descriptors in the ring */ - pRing->num = num; - return 0; -} - -/****************************************************************************/ -/** -* @brief Configure DMA channel -* -* @return 0 : On success -* -1 : On failure -*/ -/****************************************************************************/ -int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - uint32_t cfgHigh = 0; - int srcTrSize; - int dstTrSize; - - pCblk->varDataStarted = 0; - pCblk->userData = NULL; - - /* Configure - - Burst transaction when enough data in available in FIFO - - AHB Access protection 1 - - Source and destination peripheral ports - */ - cfgHigh = - dmacHw_REG_CFG_HI_FIFO_ENOUGH | dmacHw_REG_CFG_HI_AHB_HPROT_1 | - dmacHw_SRC_PERI_INTF(pConfig-> - srcPeripheralPort) | - dmacHw_DST_PERI_INTF(pConfig->dstPeripheralPort); - /* Set priority */ - dmacHw_SET_CHANNEL_PRIORITY(pCblk->module, pCblk->channel, - pConfig->channelPriority); - - if (pConfig->dstStatusRegisterAddress != 0) { - /* Destination status update enable */ - cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_DST_STAT; - /* Configure status registers */ - dmacHw_SET_DSTATAR(pCblk->module, pCblk->channel, - pConfig->dstStatusRegisterAddress); - } - - if (pConfig->srcStatusRegisterAddress != 0) { - /* Source status update enable */ - cfgHigh |= dmacHw_REG_CFG_HI_UPDATE_SRC_STAT; - /* Source status update enable */ - dmacHw_SET_SSTATAR(pCblk->module, pCblk->channel, - pConfig->srcStatusRegisterAddress); - } - /* Configure the config high register */ - dmacHw_GET_CONFIG_HI(pCblk->module, pCblk->channel) = cfgHigh; - - /* Clear all raw interrupt status */ - dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel); - dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel); - dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel); - - /* Configure block interrupt */ - if (pConfig->blockTransferInterrupt == dmacHw_INTERRUPT_ENABLE) { - dmacHw_BLOCK_INT_ENABLE(pCblk->module, pCblk->channel); - } else { - dmacHw_BLOCK_INT_DISABLE(pCblk->module, pCblk->channel); - } - /* Configure complete transfer interrupt */ - if (pConfig->completeTransferInterrupt == dmacHw_INTERRUPT_ENABLE) { - dmacHw_TRAN_INT_ENABLE(pCblk->module, pCblk->channel); - } else { - dmacHw_TRAN_INT_DISABLE(pCblk->module, pCblk->channel); - } - /* Configure error interrupt */ - if (pConfig->errorInterrupt == dmacHw_INTERRUPT_ENABLE) { - dmacHw_ERROR_INT_ENABLE(pCblk->module, pCblk->channel); - } else { - dmacHw_ERROR_INT_DISABLE(pCblk->module, pCblk->channel); - } - /* Configure gather register */ - if (pConfig->srcGatherWidth) { - srcTrSize = - dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth); - if (! - ((pConfig->srcGatherWidth % srcTrSize) - && (pConfig->srcGatherJump % srcTrSize))) { - dmacHw_REG_SGR_LO(pCblk->module, pCblk->channel) = - ((pConfig->srcGatherWidth / - srcTrSize) << 20) | (pConfig->srcGatherJump / - srcTrSize); - } else { - return -1; - } - } - /* Configure scatter register */ - if (pConfig->dstScatterWidth) { - dstTrSize = - dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth); - if (! - ((pConfig->dstScatterWidth % dstTrSize) - && (pConfig->dstScatterJump % dstTrSize))) { - dmacHw_REG_DSR_LO(pCblk->module, pCblk->channel) = - ((pConfig->dstScatterWidth / - dstTrSize) << 20) | (pConfig->dstScatterJump / - dstTrSize); - } else { - return -1; - } - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Indicates whether DMA transfer is in progress or completed -* -* @return DMA transfer status -* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing -* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed -* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error -* -*/ -/****************************************************************************/ -dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - - if (CHANNEL_BUSY(pCblk->module, pCblk->channel)) { - return dmacHw_TRANSFER_STATUS_BUSY; - } else if (dmacHw_REG_INT_RAW_ERROR(pCblk->module) & - (0x00000001 << pCblk->channel)) { - return dmacHw_TRANSFER_STATUS_ERROR; - } - - return dmacHw_TRANSFER_STATUS_DONE; -} - -/****************************************************************************/ -/** -* @brief Set descriptors for known data length -* -* When DMA has to work as a flow controller, this function prepares the -* descriptor chain to transfer data -* -* from: -* - Memory to memory -* - Peripheral to memory -* - Memory to Peripheral -* - Peripheral to Peripheral -* -* @return -1 - On failure -* 0 - On success -* -*/ -/****************************************************************************/ -int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */ - void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */ - size_t dataLen /* [ IN ] Data length in bytes */ - ) { - dmacHw_TRANSACTION_WIDTH_e dstTrWidth; - dmacHw_TRANSACTION_WIDTH_e srcTrWidth; - dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor); - dmacHw_DESC_t *pStart; - dmacHw_DESC_t *pProg; - int srcTs = 0; - int blkTs = 0; - int oddSize = 0; - int descCount = 0; - int count = 0; - int dstTrSize = 0; - int srcTrSize = 0; - uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE; - - dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth); - srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth); - - /* Skip Tx if buffer is NULL or length is unknown */ - if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) { - /* Do not initiate transfer */ - return -1; - } - - /* Ensure scatter and gather are transaction aligned */ - if ((pConfig->srcGatherWidth % srcTrSize) - || (pConfig->dstScatterWidth % dstTrSize)) { - return -2; - } - - /* - Background 1: DMAC can not perform DMA if source and destination addresses are - not properly aligned with the channel's transaction width. So, for successful - DMA transfer, transaction width must be set according to the alignment of the - source and destination address. - */ - - /* Adjust destination transaction width if destination address is not aligned properly */ - dstTrWidth = pConfig->dstMaxTransactionWidth; - while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) { - dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth); - dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth); - } - - /* Adjust source transaction width if source address is not aligned properly */ - srcTrWidth = pConfig->srcMaxTransactionWidth; - while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) { - srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth); - srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth); - } - - /* Find the maximum transaction per descriptor */ - if (pConfig->maxDataPerBlock - && ((pConfig->maxDataPerBlock / srcTrSize) < - dmacHw_MAX_BLOCKSIZE)) { - maxBlockSize = pConfig->maxDataPerBlock / srcTrSize; - } - - /* Find number of source transactions needed to complete the DMA transfer */ - srcTs = dataLen / srcTrSize; - /* Find the odd number of bytes that need to be transferred as single byte transaction width */ - if (srcTs && (dstTrSize > srcTrSize)) { - oddSize = dataLen % dstTrSize; - /* Adjust source transaction count due to "oddSize" */ - srcTs = srcTs - (oddSize / srcTrSize); - } else { - oddSize = dataLen % srcTrSize; - } - /* Adjust "descCount" due to "oddSize" */ - if (oddSize) { - descCount++; - } - /* Find the number of descriptor needed for total "srcTs" */ - if (srcTs) { - descCount += ((srcTs - 1) / maxBlockSize) + 1; - } - - /* Check the availability of "descCount" discriptors in the ring */ - pProg = pRing->pHead; - for (count = 0; (descCount <= pRing->num) && (count < descCount); - count++) { - if ((pProg->ctl.hi & dmacHw_DESC_FREE) == 0) { - /* Sufficient descriptors are not available */ - return -3; - } - pProg = (dmacHw_DESC_t *) pProg->llp; - } - - /* Remember the link list item to program the channel registers */ - pStart = pProg = pRing->pHead; - /* Make a link list with "descCount(=count)" number of descriptors */ - while (count) { - /* Reset channel control information */ - pProg->ctl.lo = 0; - /* Enable source gather if configured */ - if (pConfig->srcGatherWidth) { - pProg->ctl.lo |= dmacHw_REG_CTL_SG_ENABLE; - } - /* Enable destination scatter if configured */ - if (pConfig->dstScatterWidth) { - pProg->ctl.lo |= dmacHw_REG_CTL_DS_ENABLE; - } - /* Set source and destination address */ - pProg->sar = (uint32_t) pSrcAddr; - pProg->dar = (uint32_t) pDstAddr; - /* Use "devCtl" to mark that user memory need to be freed later if needed */ - if (pProg == pRing->pHead) { - pProg->devCtl = dmacHw_FREE_USER_MEMORY; - } else { - pProg->devCtl = 0; - } - - blkTs = srcTs; - - /* Special treatmeant for last descriptor */ - if (count == 1) { - /* Mark the last descriptor */ - pProg->ctl.lo &= - ~(dmacHw_REG_CTL_LLP_DST_EN | - dmacHw_REG_CTL_LLP_SRC_EN); - /* Treatment for odd data bytes */ - if (oddSize) { - /* Adjust for single byte transaction width */ - switch (pConfig->transferType) { - case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM: - dstTrWidth = - dmacHw_DST_TRANSACTION_WIDTH_8; - blkTs = - (oddSize / srcTrSize) + - ((oddSize % srcTrSize) ? 1 : 0); - break; - case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL: - srcTrWidth = - dmacHw_SRC_TRANSACTION_WIDTH_8; - blkTs = oddSize; - break; - case dmacHw_TRANSFER_TYPE_MEM_TO_MEM: - srcTrWidth = - dmacHw_SRC_TRANSACTION_WIDTH_8; - dstTrWidth = - dmacHw_DST_TRANSACTION_WIDTH_8; - blkTs = oddSize; - break; - case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL: - /* Do not adjust the transaction width */ - break; - } - } else { - srcTs -= blkTs; - } - } else { - if (srcTs / maxBlockSize) { - blkTs = maxBlockSize; - } - /* Remaining source transactions for next iteration */ - srcTs -= blkTs; - } - /* Must have a valid source transactions */ - dmacHw_ASSERT(blkTs > 0); - /* Set control information */ - if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) { - pProg->ctl.lo |= pConfig->transferType | - pConfig->srcUpdate | - pConfig->dstUpdate | - srcTrWidth | - dstTrWidth | - pConfig->srcMaxBurstWidth | - pConfig->dstMaxBurstWidth | - pConfig->srcMasterInterface | - pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN; - } else { - uint32_t transferType = 0; - switch (pConfig->transferType) { - case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM: - transferType = dmacHw_REG_CTL_TTFC_PM_PERI; - break; - case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL: - transferType = dmacHw_REG_CTL_TTFC_MP_PERI; - break; - default: - dmacHw_ASSERT(0); - } - pProg->ctl.lo |= transferType | - pConfig->srcUpdate | - pConfig->dstUpdate | - srcTrWidth | - dstTrWidth | - pConfig->srcMaxBurstWidth | - pConfig->dstMaxBurstWidth | - pConfig->srcMasterInterface | - pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN; - } - - /* Set block transaction size */ - pProg->ctl.hi = blkTs & dmacHw_REG_CTL_BLOCK_TS_MASK; - /* Look for next descriptor */ - if (count > 1) { - /* Point to the next descriptor */ - pProg = (dmacHw_DESC_t *) pProg->llp; - - /* Update source and destination address for next iteration */ - switch (pConfig->transferType) { - case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM: - if (pConfig->dstScatterWidth) { - pDstAddr = - (char *)pDstAddr + - blkTs * srcTrSize + - (((blkTs * srcTrSize) / - pConfig->dstScatterWidth) * - pConfig->dstScatterJump); - } else { - pDstAddr = - (char *)pDstAddr + - blkTs * srcTrSize; - } - break; - case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL: - if (pConfig->srcGatherWidth) { - pSrcAddr = - (char *)pDstAddr + - blkTs * srcTrSize + - (((blkTs * srcTrSize) / - pConfig->srcGatherWidth) * - pConfig->srcGatherJump); - } else { - pSrcAddr = - (char *)pSrcAddr + - blkTs * srcTrSize; - } - break; - case dmacHw_TRANSFER_TYPE_MEM_TO_MEM: - if (pConfig->dstScatterWidth) { - pDstAddr = - (char *)pDstAddr + - blkTs * srcTrSize + - (((blkTs * srcTrSize) / - pConfig->dstScatterWidth) * - pConfig->dstScatterJump); - } else { - pDstAddr = - (char *)pDstAddr + - blkTs * srcTrSize; - } - - if (pConfig->srcGatherWidth) { - pSrcAddr = - (char *)pDstAddr + - blkTs * srcTrSize + - (((blkTs * srcTrSize) / - pConfig->srcGatherWidth) * - pConfig->srcGatherJump); - } else { - pSrcAddr = - (char *)pSrcAddr + - blkTs * srcTrSize; - } - break; - case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL: - /* Do not adjust the address */ - break; - default: - dmacHw_ASSERT(0); - } - } else { - /* At the end of transfer "srcTs" must be zero */ - dmacHw_ASSERT(srcTs == 0); - } - count--; - } - - /* Remember the descriptor to initialize the registers */ - if (pRing->pProg == dmacHw_DESC_INIT) { - pRing->pProg = pStart; - } - /* Indicate that the descriptor is updated */ - pRing->pEnd = pProg; - /* Head pointing to the next descriptor */ - pRing->pHead = (dmacHw_DESC_t *) pProg->llp; - /* Update Tail pointer if destination is a peripheral, - because no one is going to read from the pTail - */ - if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) { - pRing->pTail = pRing->pHead; - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Provides DMA controller attributes -* -* -* @return DMA controller attributes -* -* @note -* None -*/ -/****************************************************************************/ -uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controller attribute of type dmacHw_CONTROLLER_ATTRIB_e */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - - switch (attr) { - case dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM: - return dmacHw_GET_NUM_CHANNEL(pCblk->module); - case dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE: - return (1 << - (dmacHw_GET_MAX_BLOCK_SIZE - (pCblk->module, pCblk->module) + 2)) - 8; - case dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM: - return dmacHw_GET_NUM_INTERFACE(pCblk->module); - case dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH: - return 32 << dmacHw_GET_CHANNEL_DATA_WIDTH(pCblk->module, - pCblk->channel); - case dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE: - return GetFifoSize(handle); - } - dmacHw_ASSERT(0); - return 0; -} diff --git a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c b/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c deleted file mode 100644 index a1f328357aa4b91b0f0d49f7b1b944de01cc6e8a..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/csp/dmac/dmacHw_extra.c +++ /dev/null @@ -1,1017 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dmacHw_extra.c -* -* @brief Extra Low level DMA controller driver routines -* -* @note -* -* These routines provide basic DMA functionality only. -*/ -/****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include - -#include -#include -#include - -extern dmacHw_CBLK_t dmacHw_gCblk[dmacHw_MAX_CHANNEL_COUNT]; /* Declared in dmacHw.c */ - -/* ---- External Function Prototypes ------------------------------------- */ - -/* ---- Internal Use Function Prototypes --------------------------------- */ -/****************************************************************************/ -/** -* @brief Overwrites data length in the descriptor -* -* This function overwrites data length in the descriptor -* -* -* @return void -* -* @note -* This is only used for PCM channel -*/ -/****************************************************************************/ -void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - size_t dataLen /* [ IN ] Data length in bytes */ - ); - -/****************************************************************************/ -/** -* @brief Helper function to display DMA registers -* -* @return void -* -* -* @note -* None -*/ -/****************************************************************************/ -static void DisplayRegisterContents(int module, /* [ IN ] DMA Controller unit (0-1) */ - int channel, /* [ IN ] DMA Channel (0-7) / -1(all) */ - int (*fpPrint) (const char *, ...) /* [ IN ] Callback to the print function */ - ) { - int chan; - - (*fpPrint) ("Displaying register content \n\n"); - (*fpPrint) ("Module %d: Interrupt raw transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_RAW_TRAN(module))); - (*fpPrint) ("Module %d: Interrupt raw block 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_RAW_BLOCK(module))); - (*fpPrint) ("Module %d: Interrupt raw src transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_RAW_STRAN(module))); - (*fpPrint) ("Module %d: Interrupt raw dst transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_RAW_DTRAN(module))); - (*fpPrint) ("Module %d: Interrupt raw error 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_RAW_ERROR(module))); - (*fpPrint) ("--------------------------------------------------\n"); - (*fpPrint) ("Module %d: Interrupt stat transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_STAT_TRAN(module))); - (*fpPrint) ("Module %d: Interrupt stat block 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_STAT_BLOCK(module))); - (*fpPrint) ("Module %d: Interrupt stat src transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_STAT_STRAN(module))); - (*fpPrint) ("Module %d: Interrupt stat dst transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_STAT_DTRAN(module))); - (*fpPrint) ("Module %d: Interrupt stat error 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_STAT_ERROR(module))); - (*fpPrint) ("--------------------------------------------------\n"); - (*fpPrint) ("Module %d: Interrupt mask transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_MASK_TRAN(module))); - (*fpPrint) ("Module %d: Interrupt mask block 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_MASK_BLOCK(module))); - (*fpPrint) ("Module %d: Interrupt mask src transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_MASK_STRAN(module))); - (*fpPrint) ("Module %d: Interrupt mask dst transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_MASK_DTRAN(module))); - (*fpPrint) ("Module %d: Interrupt mask error 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_MASK_ERROR(module))); - (*fpPrint) ("--------------------------------------------------\n"); - (*fpPrint) ("Module %d: Interrupt clear transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_CLEAR_TRAN(module))); - (*fpPrint) ("Module %d: Interrupt clear block 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_CLEAR_BLOCK(module))); - (*fpPrint) ("Module %d: Interrupt clear src transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_CLEAR_STRAN(module))); - (*fpPrint) ("Module %d: Interrupt clear dst transfer 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_CLEAR_DTRAN(module))); - (*fpPrint) ("Module %d: Interrupt clear error 0x%X\n", - module, (uint32_t) (dmacHw_REG_INT_CLEAR_ERROR(module))); - (*fpPrint) ("--------------------------------------------------\n"); - (*fpPrint) ("Module %d: SW source req 0x%X\n", - module, (uint32_t) (dmacHw_REG_SW_HS_SRC_REQ(module))); - (*fpPrint) ("Module %d: SW dest req 0x%X\n", - module, (uint32_t) (dmacHw_REG_SW_HS_DST_REQ(module))); - (*fpPrint) ("Module %d: SW source signal 0x%X\n", - module, (uint32_t) (dmacHw_REG_SW_HS_SRC_SGL_REQ(module))); - (*fpPrint) ("Module %d: SW dest signal 0x%X\n", - module, (uint32_t) (dmacHw_REG_SW_HS_DST_SGL_REQ(module))); - (*fpPrint) ("Module %d: SW source last 0x%X\n", - module, (uint32_t) (dmacHw_REG_SW_HS_SRC_LST_REQ(module))); - (*fpPrint) ("Module %d: SW dest last 0x%X\n", - module, (uint32_t) (dmacHw_REG_SW_HS_DST_LST_REQ(module))); - (*fpPrint) ("--------------------------------------------------\n"); - (*fpPrint) ("Module %d: misc config 0x%X\n", - module, (uint32_t) (dmacHw_REG_MISC_CFG(module))); - (*fpPrint) ("Module %d: misc channel enable 0x%X\n", - module, (uint32_t) (dmacHw_REG_MISC_CH_ENABLE(module))); - (*fpPrint) ("Module %d: misc ID 0x%X\n", - module, (uint32_t) (dmacHw_REG_MISC_ID(module))); - (*fpPrint) ("Module %d: misc test 0x%X\n", - module, (uint32_t) (dmacHw_REG_MISC_TEST(module))); - - if (channel == -1) { - for (chan = 0; chan < 8; chan++) { - (*fpPrint) - ("--------------------------------------------------\n"); - (*fpPrint) - ("Module %d: Channel %d Source 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_SAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Destination 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_DAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d LLP 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_LLP(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Control (LO) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CTL_LO(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Control (HI) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CTL_HI(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Source Stats 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_SSTAT(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Dest Stats 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_DSTAT(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Source Stats Addr 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_SSTATAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Dest Stats Addr 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_DSTATAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Config (LO) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CFG_LO(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Config (HI) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CFG_HI(module, chan))); - } - } else { - chan = channel; - (*fpPrint) - ("--------------------------------------------------\n"); - (*fpPrint) - ("Module %d: Channel %d Source 0x%X\n", - module, chan, (uint32_t) (dmacHw_REG_SAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Destination 0x%X\n", - module, chan, (uint32_t) (dmacHw_REG_DAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d LLP 0x%X\n", - module, chan, (uint32_t) (dmacHw_REG_LLP(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Control (LO) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CTL_LO(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Control (HI) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CTL_HI(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Source Stats 0x%X\n", - module, chan, (uint32_t) (dmacHw_REG_SSTAT(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Dest Stats 0x%X\n", - module, chan, (uint32_t) (dmacHw_REG_DSTAT(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Source Stats Addr 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_SSTATAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Dest Stats Addr 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_DSTATAR(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Config (LO) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CFG_LO(module, chan))); - (*fpPrint) - ("Module %d: Channel %d Config (HI) 0x%X\n", - module, chan, - (uint32_t) (dmacHw_REG_CFG_HI(module, chan))); - } -} - -/****************************************************************************/ -/** -* @brief Helper function to display descriptor ring -* -* @return void -* -* -* @note -* None -*/ -/****************************************************************************/ -static void DisplayDescRing(void *pDescriptor, /* [ IN ] Descriptor buffer */ - int (*fpPrint) (const char *, ...) /* [ IN ] Callback to the print function */ - ) { - dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor); - dmacHw_DESC_t *pStart; - - if (pRing->pHead == NULL) { - return; - } - - pStart = pRing->pHead; - - while ((dmacHw_DESC_t *) pStart->llp != pRing->pHead) { - if (pStart == pRing->pHead) { - (*fpPrint) ("Head\n"); - } - if (pStart == pRing->pTail) { - (*fpPrint) ("Tail\n"); - } - if (pStart == pRing->pProg) { - (*fpPrint) ("Prog\n"); - } - if (pStart == pRing->pEnd) { - (*fpPrint) ("End\n"); - } - if (pStart == pRing->pFree) { - (*fpPrint) ("Free\n"); - } - (*fpPrint) ("0x%X:\n", (uint32_t) pStart); - (*fpPrint) ("sar 0x%0X\n", pStart->sar); - (*fpPrint) ("dar 0x%0X\n", pStart->dar); - (*fpPrint) ("llp 0x%0X\n", pStart->llp); - (*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo); - (*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi); - (*fpPrint) ("sstat 0x%0X\n", pStart->sstat); - (*fpPrint) ("dstat 0x%0X\n", pStart->dstat); - (*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl); - - pStart = (dmacHw_DESC_t *) pStart->llp; - } - if (pStart == pRing->pHead) { - (*fpPrint) ("Head\n"); - } - if (pStart == pRing->pTail) { - (*fpPrint) ("Tail\n"); - } - if (pStart == pRing->pProg) { - (*fpPrint) ("Prog\n"); - } - if (pStart == pRing->pEnd) { - (*fpPrint) ("End\n"); - } - if (pStart == pRing->pFree) { - (*fpPrint) ("Free\n"); - } - (*fpPrint) ("0x%X:\n", (uint32_t) pStart); - (*fpPrint) ("sar 0x%0X\n", pStart->sar); - (*fpPrint) ("dar 0x%0X\n", pStart->dar); - (*fpPrint) ("llp 0x%0X\n", pStart->llp); - (*fpPrint) ("ctl.lo 0x%0X\n", pStart->ctl.lo); - (*fpPrint) ("ctl.hi 0x%0X\n", pStart->ctl.hi); - (*fpPrint) ("sstat 0x%0X\n", pStart->sstat); - (*fpPrint) ("dstat 0x%0X\n", pStart->dstat); - (*fpPrint) ("devCtl 0x%0X\n", pStart->devCtl); -} - -/****************************************************************************/ -/** -* @brief Check if DMA channel is the flow controller -* -* @return 1 : If DMA is a flow controller -* 0 : Peripheral is the flow controller -* -* @note -* None -*/ -/****************************************************************************/ -static inline int DmaIsFlowController(void *pDescriptor /* [ IN ] Descriptor buffer */ - ) { - uint32_t ttfc = - (dmacHw_GET_DESC_RING(pDescriptor))->pTail->ctl. - lo & dmacHw_REG_CTL_TTFC_MASK; - - switch (ttfc) { - case dmacHw_REG_CTL_TTFC_MM_DMAC: - case dmacHw_REG_CTL_TTFC_MP_DMAC: - case dmacHw_REG_CTL_TTFC_PM_DMAC: - case dmacHw_REG_CTL_TTFC_PP_DMAC: - return 1; - } - - return 0; -} - -/****************************************************************************/ -/** -* @brief Overwrites data length in the descriptor -* -* This function overwrites data length in the descriptor -* -* -* @return void -* -* @note -* This is only used for PCM channel -*/ -/****************************************************************************/ -void dmacHw_setDataLength(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - size_t dataLen /* [ IN ] Data length in bytes */ - ) { - dmacHw_DESC_t *pProg; - dmacHw_DESC_t *pHead; - int srcTs = 0; - int srcTrSize = 0; - - pHead = (dmacHw_GET_DESC_RING(pDescriptor))->pHead; - pProg = pHead; - - srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth); - srcTs = dataLen / srcTrSize; - do { - pProg->ctl.hi = srcTs & dmacHw_REG_CTL_BLOCK_TS_MASK; - pProg = (dmacHw_DESC_t *) pProg->llp; - } while (pProg != pHead); -} - -/****************************************************************************/ -/** -* @brief Clears the interrupt -* -* This function clears the DMA channel specific interrupt -* -* -* @return void -* -* @note -* Must be called under the context of ISR -*/ -/****************************************************************************/ -void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - - dmacHw_TRAN_INT_CLEAR(pCblk->module, pCblk->channel); - dmacHw_BLOCK_INT_CLEAR(pCblk->module, pCblk->channel); - dmacHw_ERROR_INT_CLEAR(pCblk->module, pCblk->channel); -} - -/****************************************************************************/ -/** -* @brief Returns the cause of channel specific DMA interrupt -* -* This function returns the cause of interrupt -* -* @return Interrupt status, each bit representing a specific type of interrupt -* -* @note -* Should be called under the context of ISR -*/ -/****************************************************************************/ -dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - dmacHw_INTERRUPT_STATUS_e status = dmacHw_INTERRUPT_STATUS_NONE; - - if (dmacHw_REG_INT_STAT_TRAN(pCblk->module) & - ((0x00000001 << pCblk->channel))) { - status |= dmacHw_INTERRUPT_STATUS_TRANS; - } - if (dmacHw_REG_INT_STAT_BLOCK(pCblk->module) & - ((0x00000001 << pCblk->channel))) { - status |= dmacHw_INTERRUPT_STATUS_BLOCK; - } - if (dmacHw_REG_INT_STAT_ERROR(pCblk->module) & - ((0x00000001 << pCblk->channel))) { - status |= dmacHw_INTERRUPT_STATUS_ERROR; - } - - return status; -} - -/****************************************************************************/ -/** -* @brief Indentifies a DMA channel causing interrupt -* -* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e -* -* @return NULL : No channel causing DMA interrupt -* ! NULL : Handle to a channel causing DMA interrupt -* @note -* dmacHw_clearInterrupt() must be called with a valid handle after calling this function -*/ -/****************************************************************************/ -dmacHw_HANDLE_t dmacHw_getInterruptSource(void) -{ - uint32_t i; - - for (i = 0; i < dmaChannelCount_0 + dmaChannelCount_1; i++) { - if ((dmacHw_REG_INT_STAT_TRAN(dmacHw_gCblk[i].module) & - ((0x00000001 << dmacHw_gCblk[i].channel))) - || (dmacHw_REG_INT_STAT_BLOCK(dmacHw_gCblk[i].module) & - ((0x00000001 << dmacHw_gCblk[i].channel))) - || (dmacHw_REG_INT_STAT_ERROR(dmacHw_gCblk[i].module) & - ((0x00000001 << dmacHw_gCblk[i].channel))) - ) { - return dmacHw_CBLK_TO_HANDLE(&dmacHw_gCblk[i]); - } - } - return dmacHw_CBLK_TO_HANDLE(NULL); -} - -/****************************************************************************/ -/** -* @brief Estimates number of descriptor needed to perform certain DMA transfer -* -* -* @return On failure : -1 -* On success : Number of descriptor count -* -* -*/ -/****************************************************************************/ -int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */ - void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */ - size_t dataLen /* [ IN ] Data length in bytes */ - ) { - int srcTs = 0; - int oddSize = 0; - int descCount = 0; - int dstTrSize = 0; - int srcTrSize = 0; - uint32_t maxBlockSize = dmacHw_MAX_BLOCKSIZE; - dmacHw_TRANSACTION_WIDTH_e dstTrWidth; - dmacHw_TRANSACTION_WIDTH_e srcTrWidth; - - dstTrSize = dmacHw_GetTrWidthInBytes(pConfig->dstMaxTransactionWidth); - srcTrSize = dmacHw_GetTrWidthInBytes(pConfig->srcMaxTransactionWidth); - - /* Skip Tx if buffer is NULL or length is unknown */ - if ((pSrcAddr == NULL) || (pDstAddr == NULL) || (dataLen == 0)) { - /* Do not initiate transfer */ - return -1; - } - - /* Ensure scatter and gather are transaction aligned */ - if (pConfig->srcGatherWidth % srcTrSize - || pConfig->dstScatterWidth % dstTrSize) { - return -1; - } - - /* - Background 1: DMAC can not perform DMA if source and destination addresses are - not properly aligned with the channel's transaction width. So, for successful - DMA transfer, transaction width must be set according to the alignment of the - source and destination address. - */ - - /* Adjust destination transaction width if destination address is not aligned properly */ - dstTrWidth = pConfig->dstMaxTransactionWidth; - while (dmacHw_ADDRESS_MASK(dstTrSize) & (uint32_t) pDstAddr) { - dstTrWidth = dmacHw_GetNextTrWidth(dstTrWidth); - dstTrSize = dmacHw_GetTrWidthInBytes(dstTrWidth); - } - - /* Adjust source transaction width if source address is not aligned properly */ - srcTrWidth = pConfig->srcMaxTransactionWidth; - while (dmacHw_ADDRESS_MASK(srcTrSize) & (uint32_t) pSrcAddr) { - srcTrWidth = dmacHw_GetNextTrWidth(srcTrWidth); - srcTrSize = dmacHw_GetTrWidthInBytes(srcTrWidth); - } - - /* Find the maximum transaction per descriptor */ - if (pConfig->maxDataPerBlock - && ((pConfig->maxDataPerBlock / srcTrSize) < - dmacHw_MAX_BLOCKSIZE)) { - maxBlockSize = pConfig->maxDataPerBlock / srcTrSize; - } - - /* Find number of source transactions needed to complete the DMA transfer */ - srcTs = dataLen / srcTrSize; - /* Find the odd number of bytes that need to be transferred as single byte transaction width */ - if (srcTs && (dstTrSize > srcTrSize)) { - oddSize = dataLen % dstTrSize; - /* Adjust source transaction count due to "oddSize" */ - srcTs = srcTs - (oddSize / srcTrSize); - } else { - oddSize = dataLen % srcTrSize; - } - /* Adjust "descCount" due to "oddSize" */ - if (oddSize) { - descCount++; - } - - /* Find the number of descriptor needed for total "srcTs" */ - if (srcTs) { - descCount += ((srcTs - 1) / maxBlockSize) + 1; - } - - return descCount; -} - -/****************************************************************************/ -/** -* @brief Check the existence of pending descriptor -* -* This function confirmes if there is any pending descriptor in the chain -* to program the channel -* -* @return 1 : Channel need to be programmed with pending descriptor -* 0 : No more pending descriptor to programe the channel -* -* @note -* - This function should be called from ISR in case there are pending -* descriptor to program the channel. -* -* Example: -* -* dmac_isr () -* { -* ... -* if (dmacHw_descriptorPending (handle)) -* { -* dmacHw_initiateTransfer (handle); -* } -* } -* -*/ -/****************************************************************************/ -uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *pDescriptor /* [ IN ] Descriptor buffer */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor); - - /* Make sure channel is not busy */ - if (!CHANNEL_BUSY(pCblk->module, pCblk->channel)) { - /* Check if pEnd is not processed */ - if (pRing->pEnd) { - /* Something left for processing */ - return 1; - } - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Program channel register to stop transfer -* -* Ensures the channel is not doing any transfer after calling this function -* -* @return void -* -*/ -/****************************************************************************/ -void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ) { - dmacHw_CBLK_t *pCblk; - - pCblk = dmacHw_HANDLE_TO_CBLK(handle); - - /* Stop the channel */ - dmacHw_DMA_STOP(pCblk->module, pCblk->channel); -} - -/****************************************************************************/ -/** -* @brief Deallocates source or destination memory, allocated -* -* This function can be called to deallocate data memory that was DMAed successfully -* -* @return On failure : -1 -* On success : Number of buffer freed -* -* @note -* This function will be called ONLY, when source OR destination address is pointing -* to dynamic memory -*/ -/****************************************************************************/ -int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */ - ) { - dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor); - uint32_t count = 0; - - if (fpFree == NULL) { - return -1; - } - - while ((pRing->pFree != pRing->pTail) - && (pRing->pFree->ctl.lo & dmacHw_DESC_FREE)) { - if (pRing->pFree->devCtl == dmacHw_FREE_USER_MEMORY) { - /* Identify, which memory to free */ - if (dmacHw_DST_IS_MEMORY(pConfig->transferType)) { - (*fpFree) ((void *)pRing->pFree->dar); - } else { - /* Destination was a peripheral */ - (*fpFree) ((void *)pRing->pFree->sar); - } - /* Unmark user memory to indicate it is freed */ - pRing->pFree->devCtl = ~dmacHw_FREE_USER_MEMORY; - } - dmacHw_NEXT_DESC(pRing, pFree); - - count++; - } - - return count; -} - -/****************************************************************************/ -/** -* @brief Prepares descriptor ring, when source peripheral working as a flow controller -* -* This function will update the discriptor ring by allocating buffers, when source peripheral -* has to work as a flow controller to transfer data from: -* - Peripheral to memory. -* -* @return On failure : -1 -* On success : Number of descriptor updated -* -* -* @note -* Channel must be configured for peripheral to memory transfer -* -*/ -/****************************************************************************/ -int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - uint32_t srcAddr, /* [ IN ] Source peripheral address */ - void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */ - int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */ - int num /* [ IN ] Number of descriptor to set */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - dmacHw_DESC_t *pProg = NULL; - dmacHw_DESC_t *pLast = NULL; - dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor); - uint32_t dstAddr; - uint32_t controlParam; - int i; - - dmacHw_ASSERT(pConfig->transferType == - dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM); - - if (num > pRing->num) { - return -1; - } - - pLast = pRing->pEnd; /* Last descriptor updated */ - pProg = pRing->pHead; /* First descriptor in the new list */ - - controlParam = pConfig->srcUpdate | - pConfig->dstUpdate | - pConfig->srcMaxTransactionWidth | - pConfig->dstMaxTransactionWidth | - pConfig->srcMasterInterface | - pConfig->dstMasterInterface | - pConfig->srcMaxBurstWidth | - pConfig->dstMaxBurstWidth | - dmacHw_REG_CTL_TTFC_PM_PERI | - dmacHw_REG_CTL_LLP_DST_EN | - dmacHw_REG_CTL_LLP_SRC_EN | dmacHw_REG_CTL_INT_EN; - - for (i = 0; i < num; i++) { - /* Allocate Rx buffer only for idle descriptor */ - if (((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) || - ((dmacHw_DESC_t *) pRing->pHead->llp == pRing->pTail) - ) { - /* Rx descriptor is not idle */ - break; - } - /* Set source address */ - pRing->pHead->sar = srcAddr; - if (fpAlloc) { - /* Allocate memory for buffer in descriptor */ - dstAddr = (uint32_t) (*fpAlloc) (len); - /* Check the destination address */ - if (dstAddr == 0) { - if (i == 0) { - /* Not a single descriptor is available */ - return -1; - } - break; - } - /* Set destination address */ - pRing->pHead->dar = dstAddr; - } - /* Set control information */ - pRing->pHead->ctl.lo = controlParam; - /* Use "devCtl" to mark the memory that need to be freed later */ - pRing->pHead->devCtl = dmacHw_FREE_USER_MEMORY; - /* Descriptor is now owned by the channel */ - pRing->pHead->ctl.hi = 0; - /* Remember the descriptor last updated */ - pRing->pEnd = pRing->pHead; - /* Update next descriptor */ - dmacHw_NEXT_DESC(pRing, pHead); - } - - /* Mark the end of the list */ - pRing->pEnd->ctl.lo &= - ~(dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN); - /* Connect the list */ - if (pLast != pProg) { - pLast->ctl.lo |= - dmacHw_REG_CTL_LLP_DST_EN | dmacHw_REG_CTL_LLP_SRC_EN; - } - /* Mark the descriptors are updated */ - pCblk->descUpdated = 1; - if (!pCblk->varDataStarted) { - /* LLP must be pointing to the first descriptor */ - dmacHw_SET_LLP(pCblk->module, pCblk->channel, - (uint32_t) pProg - pRing->virt2PhyOffset); - /* Channel, handling variable data started */ - pCblk->varDataStarted = 1; - } - - return i; -} - -/****************************************************************************/ -/** -* @brief Read data DMAed to memory -* -* This function will read data that has been DMAed to memory while transferring from: -* - Memory to memory -* - Peripheral to memory -* -* @param handle - -* @param ppBbuf - -* @param pLen - -* -* @return 0 - No more data is available to read -* 1 - More data might be available to read -* -*/ -/****************************************************************************/ -int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void **ppBbuf, /* [ OUT ] Data received */ - size_t *pLlen /* [ OUT ] Length of the data received */ - ) { - dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor); - - (void)handle; - - if (pConfig->transferMode != dmacHw_TRANSFER_MODE_CONTINUOUS) { - if (((pRing->pTail->ctl.hi & dmacHw_DESC_FREE) == 0) || - (pRing->pTail == pRing->pHead) - ) { - /* No receive data available */ - *ppBbuf = (char *)NULL; - *pLlen = 0; - - return 0; - } - } - - /* Return read buffer and length */ - *ppBbuf = (char *)pRing->pTail->dar; - - /* Extract length of the received data */ - if (DmaIsFlowController(pDescriptor)) { - uint32_t srcTrSize = 0; - - switch (pRing->pTail->ctl.lo & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) { - case dmacHw_REG_CTL_SRC_TR_WIDTH_8: - srcTrSize = 1; - break; - case dmacHw_REG_CTL_SRC_TR_WIDTH_16: - srcTrSize = 2; - break; - case dmacHw_REG_CTL_SRC_TR_WIDTH_32: - srcTrSize = 4; - break; - case dmacHw_REG_CTL_SRC_TR_WIDTH_64: - srcTrSize = 8; - break; - default: - dmacHw_ASSERT(0); - } - /* Calculate length from the block size */ - *pLlen = - (pRing->pTail->ctl.hi & dmacHw_REG_CTL_BLOCK_TS_MASK) * - srcTrSize; - } else { - /* Extract length from the source peripheral */ - *pLlen = pRing->pTail->sstat; - } - - /* Advance tail to next descriptor */ - dmacHw_NEXT_DESC(pRing, pTail); - - return 1; -} - -/****************************************************************************/ -/** -* @brief Set descriptor carrying control information -* -* This function will be used to send specific control information to the device -* using the DMA channel -* -* -* @return -1 - On failure -* 0 - On success -* -* @note -* None -*/ -/****************************************************************************/ -int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - uint32_t ctlAddress, /* [ IN ] Address of the device control register */ - uint32_t control /* [ IN ] Device control information */ - ) { - dmacHw_DESC_RING_t *pRing = dmacHw_GET_DESC_RING(pDescriptor); - - if (ctlAddress == 0) { - return -1; - } - - /* Check the availability of descriptors in the ring */ - if ((pRing->pHead->ctl.hi & dmacHw_DESC_FREE) == 0) { - return -1; - } - /* Set control information */ - pRing->pHead->devCtl = control; - /* Set source and destination address */ - pRing->pHead->sar = (uint32_t) &pRing->pHead->devCtl; - pRing->pHead->dar = ctlAddress; - /* Set control parameters */ - if (pConfig->flowControler == dmacHw_FLOW_CONTROL_DMA) { - pRing->pHead->ctl.lo = pConfig->transferType | - dmacHw_SRC_ADDRESS_UPDATE_MODE_INC | - dmacHw_DST_ADDRESS_UPDATE_MODE_INC | - dmacHw_SRC_TRANSACTION_WIDTH_32 | - pConfig->dstMaxTransactionWidth | - dmacHw_SRC_BURST_WIDTH_0 | - dmacHw_DST_BURST_WIDTH_0 | - pConfig->srcMasterInterface | - pConfig->dstMasterInterface | dmacHw_REG_CTL_INT_EN; - } else { - uint32_t transferType = 0; - switch (pConfig->transferType) { - case dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM: - transferType = dmacHw_REG_CTL_TTFC_PM_PERI; - break; - case dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL: - transferType = dmacHw_REG_CTL_TTFC_MP_PERI; - break; - default: - dmacHw_ASSERT(0); - } - pRing->pHead->ctl.lo = transferType | - dmacHw_SRC_ADDRESS_UPDATE_MODE_INC | - dmacHw_DST_ADDRESS_UPDATE_MODE_INC | - dmacHw_SRC_TRANSACTION_WIDTH_32 | - pConfig->dstMaxTransactionWidth | - dmacHw_SRC_BURST_WIDTH_0 | - dmacHw_DST_BURST_WIDTH_0 | - pConfig->srcMasterInterface | - pConfig->dstMasterInterface | - pConfig->flowControler | dmacHw_REG_CTL_INT_EN; - } - - /* Set block transaction size to one 32 bit transaction */ - pRing->pHead->ctl.hi = dmacHw_REG_CTL_BLOCK_TS_MASK & 1; - - /* Remember the descriptor to initialize the registers */ - if (pRing->pProg == dmacHw_DESC_INIT) { - pRing->pProg = pRing->pHead; - } - pRing->pEnd = pRing->pHead; - - /* Advance the descriptor */ - dmacHw_NEXT_DESC(pRing, pHead); - - /* Update Tail pointer if destination is a peripheral */ - if (!dmacHw_DST_IS_MEMORY(pConfig->transferType)) { - pRing->pTail = pRing->pHead; - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Sets channel specific user data -* -* This function associates user data to a specific DMA channel -* -*/ -/****************************************************************************/ -void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *userData /* [ IN ] User data */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - - pCblk->userData = userData; -} - -/****************************************************************************/ -/** -* @brief Gets channel specific user data -* -* This function returns user data specific to a DMA channel -* -* @return user data -*/ -/****************************************************************************/ -void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - - return pCblk->userData; -} - -/****************************************************************************/ -/** -* @brief Resets descriptor control information -* -* @return void -*/ -/****************************************************************************/ -void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */ - ) { - int i; - dmacHw_DESC_RING_t *pRing; - dmacHw_DESC_t *pDesc; - - pRing = dmacHw_GET_DESC_RING(pDescriptor); - pDesc = pRing->pHead; - - for (i = 0; i < pRing->num; i++) { - /* Mark descriptor is ready to use */ - pDesc->ctl.hi = dmacHw_DESC_FREE; - /* Look into next link list item */ - pDesc++; - } - pRing->pFree = pRing->pTail = pRing->pEnd = pRing->pHead; - pRing->pProg = dmacHw_DESC_INIT; -} - -/****************************************************************************/ -/** -* @brief Displays channel specific registers and other control parameters -* -* @return void -* -* -* @note -* None -*/ -/****************************************************************************/ -void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */ - ) { - dmacHw_CBLK_t *pCblk = dmacHw_HANDLE_TO_CBLK(handle); - - DisplayRegisterContents(pCblk->module, pCblk->channel, fpPrint); - DisplayDescRing(pDescriptor, fpPrint); -} diff --git a/arch/arm/mach-bcmring/csp/tmr/Makefile b/arch/arm/mach-bcmring/csp/tmr/Makefile deleted file mode 100644 index 244a61ab769731815482c8e65fb578ea809e46ba..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/csp/tmr/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-y += tmrHw.o diff --git a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c b/arch/arm/mach-bcmring/csp/tmr/tmrHw.c deleted file mode 100644 index 16225e43f3c33dde11e0ab8d2761142b214cbf46..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/csp/tmr/tmrHw.c +++ /dev/null @@ -1,576 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file tmrHw.c -* -* @brief Low level Timer driver routines -* -* @note -* -* These routines provide basic timer functionality only. -*/ -/****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include - -#include -#include - -#define tmrHw_ASSERT(a) if (!(a)) *(char *)0 = 0 -#define tmrHw_MILLISEC_PER_SEC (1000) - -#define tmrHw_LOW_1_RESOLUTION_COUNT (tmrHw_LOW_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC) -#define tmrHw_LOW_1_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_1_RESOLUTION_COUNT) -#define tmrHw_LOW_16_RESOLUTION_COUNT (tmrHw_LOW_1_RESOLUTION_COUNT / 16) -#define tmrHw_LOW_16_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_16_RESOLUTION_COUNT) -#define tmrHw_LOW_256_RESOLUTION_COUNT (tmrHw_LOW_1_RESOLUTION_COUNT / 256) -#define tmrHw_LOW_256_MAX_MILLISEC (0xFFFFFFFF / tmrHw_LOW_256_RESOLUTION_COUNT) - -#define tmrHw_HIGH_1_RESOLUTION_COUNT (tmrHw_HIGH_RESOLUTION_CLOCK / tmrHw_MILLISEC_PER_SEC) -#define tmrHw_HIGH_1_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_1_RESOLUTION_COUNT) -#define tmrHw_HIGH_16_RESOLUTION_COUNT (tmrHw_HIGH_1_RESOLUTION_COUNT / 16) -#define tmrHw_HIGH_16_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_16_RESOLUTION_COUNT) -#define tmrHw_HIGH_256_RESOLUTION_COUNT (tmrHw_HIGH_1_RESOLUTION_COUNT / 256) -#define tmrHw_HIGH_256_MAX_MILLISEC (0xFFFFFFFF / tmrHw_HIGH_256_RESOLUTION_COUNT) - -static void ResetTimer(tmrHw_ID_t timerId) - __attribute__ ((section(".aramtext"))); -static int tmrHw_divide(int num, int denom) - __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Get timer capability -* -* This function returns various capabilities/attributes of a timer -* -* @return Capability -* -*/ -/****************************************************************************/ -uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_CAPABILITY_e capability /* [ IN ] Timer capability */ -) { - switch (capability) { - case tmrHw_CAPABILITY_CLOCK: - return (timerId <= - 1) ? tmrHw_LOW_RESOLUTION_CLOCK : - tmrHw_HIGH_RESOLUTION_CLOCK; - case tmrHw_CAPABILITY_RESOLUTION: - return 32; - default: - return 0; - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Resets a timer -* -* This function initializes timer -* -* @return void -* -*/ -/****************************************************************************/ -static void ResetTimer(tmrHw_ID_t timerId /* [ IN ] Timer Id */ -) { - /* Reset timer */ - pTmrHw[timerId].LoadValue = 0; - pTmrHw[timerId].CurrentValue = 0xFFFFFFFF; - pTmrHw[timerId].Control = 0; - pTmrHw[timerId].BackgroundLoad = 0; - /* Always configure as a 32 bit timer */ - pTmrHw[timerId].Control |= tmrHw_CONTROL_32BIT; - /* Clear interrupt only if raw status interrupt is set */ - if (pTmrHw[timerId].RawInterruptStatus) { - pTmrHw[timerId].InterruptClear = 0xFFFFFFFF; - } -} - -/****************************************************************************/ -/** -* @brief Sets counter value for an interval in ms -* -* @return On success: Effective counter value set -* On failure: 0 -* -*/ -/****************************************************************************/ -static tmrHw_INTERVAL_t SetTimerPeriod(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */ -) { - uint32_t scale = 0; - uint32_t count = 0; - - if (timerId == 0 || timerId == 1) { - if (msec <= tmrHw_LOW_1_MAX_MILLISEC) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1; - scale = tmrHw_LOW_1_RESOLUTION_COUNT; - } else if (msec <= tmrHw_LOW_16_MAX_MILLISEC) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16; - scale = tmrHw_LOW_16_RESOLUTION_COUNT; - } else if (msec <= tmrHw_LOW_256_MAX_MILLISEC) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256; - scale = tmrHw_LOW_256_RESOLUTION_COUNT; - } else { - return 0; - } - - count = msec * scale; - /* Set counter value */ - pTmrHw[timerId].LoadValue = count; - pTmrHw[timerId].BackgroundLoad = count; - - } else if (timerId == 2 || timerId == 3) { - if (msec <= tmrHw_HIGH_1_MAX_MILLISEC) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1; - scale = tmrHw_HIGH_1_RESOLUTION_COUNT; - } else if (msec <= tmrHw_HIGH_16_MAX_MILLISEC) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16; - scale = tmrHw_HIGH_16_RESOLUTION_COUNT; - } else if (msec <= tmrHw_HIGH_256_MAX_MILLISEC) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256; - scale = tmrHw_HIGH_256_RESOLUTION_COUNT; - } else { - return 0; - } - - count = msec * scale; - /* Set counter value */ - pTmrHw[timerId].LoadValue = count; - pTmrHw[timerId].BackgroundLoad = count; - } - return count / scale; -} - -/****************************************************************************/ -/** -* @brief Configures a periodic timer in terms of timer interrupt rate -* -* This function initializes a periodic timer to generate specific number of -* timer interrupt per second -* -* @return On success: Effective timer frequency -* On failure: 0 -* -*/ -/****************************************************************************/ -tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_RATE_t rate /* [ IN ] Number of timer interrupt per second */ -) { - uint32_t resolution = 0; - uint32_t count = 0; - ResetTimer(timerId); - - /* Set timer mode periodic */ - pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC; - pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT; - /* Set timer in highest resolution */ - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1; - - if (rate && (timerId == 0 || timerId == 1)) { - if (rate > tmrHw_LOW_RESOLUTION_CLOCK) { - return 0; - } - resolution = tmrHw_LOW_RESOLUTION_CLOCK; - } else if (rate && (timerId == 2 || timerId == 3)) { - if (rate > tmrHw_HIGH_RESOLUTION_CLOCK) { - return 0; - } else { - resolution = tmrHw_HIGH_RESOLUTION_CLOCK; - } - } else { - return 0; - } - /* Find the counter value */ - count = resolution / rate; - /* Set counter value */ - pTmrHw[timerId].LoadValue = count; - pTmrHw[timerId].BackgroundLoad = count; - - return resolution / count; -} - -/****************************************************************************/ -/** -* @brief Configures a periodic timer to generate timer interrupt after -* certain time interval -* -* This function initializes a periodic timer to generate timer interrupt -* after every time interval in millisecond -* -* @return On success: Effective interval set in milli-second -* On failure: 0 -* -*/ -/****************************************************************************/ -tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */ -) { - ResetTimer(timerId); - - /* Set timer mode periodic */ - pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC; - pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT; - - return SetTimerPeriod(timerId, msec); -} - -/****************************************************************************/ -/** -* @brief Configures a periodic timer to generate timer interrupt just once -* after certain time interval -* -* This function initializes a periodic timer to generate a single ticks after -* certain time interval in millisecond -* -* @return On success: Effective interval set in milli-second -* On failure: 0 -* -*/ -/****************************************************************************/ -tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_INTERVAL_t msec /* [ IN ] Interval in milli-second */ -) { - ResetTimer(timerId); - - /* Set timer mode oneshot */ - pTmrHw[timerId].Control |= tmrHw_CONTROL_PERIODIC; - pTmrHw[timerId].Control |= tmrHw_CONTROL_ONESHOT; - - return SetTimerPeriod(timerId, msec); -} - -/****************************************************************************/ -/** -* @brief Configures a timer to run as a free running timer -* -* This function initializes a timer to run as a free running timer -* -* @return Timer resolution (count / sec) -* -*/ -/****************************************************************************/ -tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - uint32_t divider /* [ IN ] Dividing the clock frequency */ -) { - uint32_t scale = 0; - - ResetTimer(timerId); - /* Set timer as free running mode */ - pTmrHw[timerId].Control &= ~tmrHw_CONTROL_PERIODIC; - pTmrHw[timerId].Control &= ~tmrHw_CONTROL_ONESHOT; - - if (divider >= 64) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_256; - scale = 256; - } else if (divider >= 8) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_16; - scale = 16; - } else { - pTmrHw[timerId].Control |= tmrHw_CONTROL_PRESCALE_1; - scale = 1; - } - - if (timerId == 0 || timerId == 1) { - return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, scale); - } else if (timerId == 2 || timerId == 3) { - return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, scale); - } - - return 0; -} - -/****************************************************************************/ -/** -* @brief Starts a timer -* -* This function starts a preconfigured timer -* -* @return -1 - On Failure -* 0 - On Success -* -*/ -/****************************************************************************/ -int tmrHw_startTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_TIMER_ENABLE; - return 0; -} - -/****************************************************************************/ -/** -* @brief Stops a timer -* -* This function stops a running timer -* -* @return -1 - On Failure -* 0 - On Success -* -*/ -/****************************************************************************/ -int tmrHw_stopTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - pTmrHw[timerId].Control &= ~tmrHw_CONTROL_TIMER_ENABLE; - return 0; -} - -/****************************************************************************/ -/** -* @brief Gets current timer count -* -* This function returns the current timer value -* -* @return Current downcounting timer value -* -*/ -/****************************************************************************/ -uint32_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - /* return 32 bit timer value */ - switch (pTmrHw[timerId].Control & tmrHw_CONTROL_MODE_MASK) { - case tmrHw_CONTROL_FREE_RUNNING: - if (pTmrHw[timerId].CurrentValue) { - return tmrHw_MAX_COUNT - pTmrHw[timerId].CurrentValue; - } - break; - case tmrHw_CONTROL_PERIODIC: - case tmrHw_CONTROL_ONESHOT: - return pTmrHw[timerId].BackgroundLoad - - pTmrHw[timerId].CurrentValue; - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Gets timer count rate -* -* This function returns the number of counts per second -* -* @return Count rate -* -*/ -/****************************************************************************/ -tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - uint32_t divider = 0; - - switch (pTmrHw[timerId].Control & tmrHw_CONTROL_PRESCALE_MASK) { - case tmrHw_CONTROL_PRESCALE_1: - divider = 1; - break; - case tmrHw_CONTROL_PRESCALE_16: - divider = 16; - break; - case tmrHw_CONTROL_PRESCALE_256: - divider = 256; - break; - default: - tmrHw_ASSERT(0); - } - - if (timerId == 0 || timerId == 1) { - return tmrHw_divide(tmrHw_LOW_RESOLUTION_CLOCK, divider); - } else { - return tmrHw_divide(tmrHw_HIGH_RESOLUTION_CLOCK, divider); - } - return 0; -} - -/****************************************************************************/ -/** -* @brief Enables timer interrupt -* -* This function enables the timer interrupt -* -* @return N/A -* -*/ -/****************************************************************************/ -void tmrHw_enableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - pTmrHw[timerId].Control |= tmrHw_CONTROL_INTERRUPT_ENABLE; -} - -/****************************************************************************/ -/** -* @brief Disables timer interrupt -* -* This function disable the timer interrupt -* -* @return N/A -* -*/ -/****************************************************************************/ -void tmrHw_disableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - pTmrHw[timerId].Control &= ~tmrHw_CONTROL_INTERRUPT_ENABLE; -} - -/****************************************************************************/ -/** -* @brief Clears the interrupt -* -* This function clears the timer interrupt -* -* @return N/A -* -* @note -* Must be called under the context of ISR -*/ -/****************************************************************************/ -void tmrHw_clearInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - pTmrHw[timerId].InterruptClear = 0x1; -} - -/****************************************************************************/ -/** -* @brief Gets the interrupt status -* -* This function returns timer interrupt status -* -* @return Interrupt status -*/ -/****************************************************************************/ -tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) { - if (pTmrHw[timerId].InterruptStatus) { - return tmrHw_INTERRUPT_STATUS_SET; - } else { - return tmrHw_INTERRUPT_STATUS_UNSET; - } -} - -/****************************************************************************/ -/** -* @brief Indentifies a timer causing interrupt -* -* This functions returns a timer causing interrupt -* -* @return 0xFFFFFFFF : No timer causing an interrupt -* ! 0xFFFFFFFF : timer causing an interrupt -* @note -* tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function -*/ -/****************************************************************************/ -tmrHw_ID_t tmrHw_getInterruptSource(void /* void */ -) { - int i; - - for (i = 0; i < tmrHw_TIMER_NUM_COUNT; i++) { - if (pTmrHw[i].InterruptStatus) { - return i; - } - } - - return 0xFFFFFFFF; -} - -/****************************************************************************/ -/** -* @brief Displays specific timer registers -* -* -* @return void -* -*/ -/****************************************************************************/ -void tmrHw_printDebugInfo(tmrHw_ID_t timerId, /* [ IN ] Timer id */ - int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */ -) { - (*fpPrint) ("Displaying register contents \n\n"); - (*fpPrint) ("Timer %d: Load value 0x%X\n", timerId, - pTmrHw[timerId].LoadValue); - (*fpPrint) ("Timer %d: Background load value 0x%X\n", timerId, - pTmrHw[timerId].BackgroundLoad); - (*fpPrint) ("Timer %d: Control 0x%X\n", timerId, - pTmrHw[timerId].Control); - (*fpPrint) ("Timer %d: Interrupt clear 0x%X\n", timerId, - pTmrHw[timerId].InterruptClear); - (*fpPrint) ("Timer %d: Interrupt raw interrupt 0x%X\n", timerId, - pTmrHw[timerId].RawInterruptStatus); - (*fpPrint) ("Timer %d: Interrupt status 0x%X\n", timerId, - pTmrHw[timerId].InterruptStatus); -} - -/****************************************************************************/ -/** -* @brief Use a timer to perform a busy wait delay for a number of usecs. -* -* @return N/A -*/ -/****************************************************************************/ -void tmrHw_udelay(tmrHw_ID_t timerId, /* [ IN ] Timer id */ - unsigned long usecs /* [ IN ] usec to delay */ -) { - tmrHw_RATE_t usec_tick_rate; - tmrHw_COUNT_t start_time; - tmrHw_COUNT_t delta_time; - - start_time = tmrHw_GetCurrentCount(timerId); - usec_tick_rate = tmrHw_divide(tmrHw_getCountRate(timerId), 1000000); - delta_time = usecs * usec_tick_rate; - - /* Busy wait */ - while (delta_time > (tmrHw_GetCurrentCount(timerId) - start_time)) - ; -} - -/****************************************************************************/ -/** -* @brief Local Divide function -* -* This function does the divide -* -* @return divide value -* -*/ -/****************************************************************************/ -static int tmrHw_divide(int num, int denom) -{ - int r; - int t = 1; - - /* Shift denom and t up to the largest value to optimize algorithm */ - /* t contains the units of each divide */ - while ((denom & 0x40000000) == 0) { /* fails if denom=0 */ - denom = denom << 1; - t = t << 1; - } - - /* Initialize the result */ - r = 0; - - do { - /* Determine if there exists a positive remainder */ - if ((num - denom) >= 0) { - /* Accumlate t to the result and calculate a new remainder */ - num = num - denom; - r = r + t; - } - /* Continue to shift denom and shift t down to 0 */ - denom = denom >> 1; - t = t >> 1; - } while (t != 0); - return r; -} diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c deleted file mode 100644 index e5fd241fccdc4b5c93e982ed503c6e43f45bac9b..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/dma.c +++ /dev/null @@ -1,1518 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dma.c -* -* @brief Implements the DMA interface. -*/ -/****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - -/* ---- Public Variables ------------------------------------------------- */ - -/* ---- Private Constants and Types -------------------------------------- */ - -#define MAKE_HANDLE(controllerIdx, channelIdx) (((controllerIdx) << 4) | (channelIdx)) - -#define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f) -#define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f) - - -/* ---- Private Variables ------------------------------------------------ */ - -static DMA_Global_t gDMA; -static struct proc_dir_entry *gDmaDir; - -#include "dma_device.c" - -/* ---- Private Function Prototypes -------------------------------------- */ - -/* ---- Functions ------------------------------------------------------- */ - -/****************************************************************************/ -/** -* Displays information for /proc/dma/channels -*/ -/****************************************************************************/ - -static int dma_proc_read_channels(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - int controllerIdx; - int channelIdx; - int limit = count - 200; - int len = 0; - DMA_Channel_t *channel; - - if (down_interruptible(&gDMA.lock) < 0) { - return -ERESTARTSYS; - } - - for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS; - controllerIdx++) { - for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS; - channelIdx++) { - if (len >= limit) { - break; - } - - channel = - &gDMA.controller[controllerIdx].channel[channelIdx]; - - len += - sprintf(buf + len, "%d:%d ", controllerIdx, - channelIdx); - - if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) != - 0) { - len += - sprintf(buf + len, "Dedicated for %s ", - DMA_gDeviceAttribute[channel-> - devType].name); - } else { - len += sprintf(buf + len, "Shared "); - } - - if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) != 0) { - len += sprintf(buf + len, "No ISR "); - } - - if ((channel->flags & DMA_CHANNEL_FLAG_LARGE_FIFO) != 0) { - len += sprintf(buf + len, "Fifo: 128 "); - } else { - len += sprintf(buf + len, "Fifo: 64 "); - } - - if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) { - len += - sprintf(buf + len, "InUse by %s", - DMA_gDeviceAttribute[channel-> - devType].name); -#if (DMA_DEBUG_TRACK_RESERVATION) - len += - sprintf(buf + len, " (%s:%d)", - channel->fileName, - channel->lineNum); -#endif - } else { - len += sprintf(buf + len, "Avail "); - } - - if (channel->lastDevType != DMA_DEVICE_NONE) { - len += - sprintf(buf + len, "Last use: %s ", - DMA_gDeviceAttribute[channel-> - lastDevType]. - name); - } - - len += sprintf(buf + len, "\n"); - } - } - up(&gDMA.lock); - *eof = 1; - - return len; -} - -/****************************************************************************/ -/** -* Displays information for /proc/dma/devices -*/ -/****************************************************************************/ - -static int dma_proc_read_devices(char *buf, char **start, off_t offset, - int count, int *eof, void *data) -{ - int limit = count - 200; - int len = 0; - int devIdx; - - if (down_interruptible(&gDMA.lock) < 0) { - return -ERESTARTSYS; - } - - for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) { - DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx]; - - if (devAttr->name == NULL) { - continue; - } - - if (len >= limit) { - break; - } - - len += sprintf(buf + len, "%-12s ", devAttr->name); - - if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) { - len += - sprintf(buf + len, "Dedicated %d:%d ", - devAttr->dedicatedController, - devAttr->dedicatedChannel); - } else { - len += sprintf(buf + len, "Shared DMA:"); - if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA0) != 0) { - len += sprintf(buf + len, "0"); - } - if ((devAttr->flags & DMA_DEVICE_FLAG_ON_DMA1) != 0) { - len += sprintf(buf + len, "1"); - } - len += sprintf(buf + len, " "); - } - if ((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) { - len += sprintf(buf + len, "NoISR "); - } - if ((devAttr->flags & DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) != 0) { - len += sprintf(buf + len, "Allow-128 "); - } - - len += - sprintf(buf + len, - "Xfer #: %Lu Ticks: %Lu Bytes: %Lu DescLen: %u\n", - devAttr->numTransfers, devAttr->transferTicks, - devAttr->transferBytes, - devAttr->ring.bytesAllocated); - - } - - up(&gDMA.lock); - *eof = 1; - - return len; -} - -/****************************************************************************/ -/** -* Determines if a DMA_Device_t is "valid". -* -* @return -* TRUE - dma device is valid -* FALSE - dma device isn't valid -*/ -/****************************************************************************/ - -static inline int IsDeviceValid(DMA_Device_t device) -{ - return (device >= 0) && (device < DMA_NUM_DEVICE_ENTRIES); -} - -/****************************************************************************/ -/** -* Translates a DMA handle into a pointer to a channel. -* -* @return -* non-NULL - pointer to DMA_Channel_t -* NULL - DMA Handle was invalid -*/ -/****************************************************************************/ - -static inline DMA_Channel_t *HandleToChannel(DMA_Handle_t handle) -{ - int controllerIdx; - int channelIdx; - - controllerIdx = CONTROLLER_FROM_HANDLE(handle); - channelIdx = CHANNEL_FROM_HANDLE(handle); - - if ((controllerIdx > DMA_NUM_CONTROLLERS) - || (channelIdx > DMA_NUM_CHANNELS)) { - return NULL; - } - return &gDMA.controller[controllerIdx].channel[channelIdx]; -} - -/****************************************************************************/ -/** -* Interrupt handler which is called to process DMA interrupts. -*/ -/****************************************************************************/ - -static irqreturn_t dma_interrupt_handler(int irq, void *dev_id) -{ - DMA_Channel_t *channel; - DMA_DeviceAttribute_t *devAttr; - int irqStatus; - - channel = (DMA_Channel_t *) dev_id; - - /* Figure out why we were called, and knock down the interrupt */ - - irqStatus = dmacHw_getInterruptStatus(channel->dmacHwHandle); - dmacHw_clearInterrupt(channel->dmacHwHandle); - - if ((channel->devType < 0) - || (channel->devType > DMA_NUM_DEVICE_ENTRIES)) { - printk(KERN_ERR "dma_interrupt_handler: Invalid devType: %d\n", - channel->devType); - return IRQ_NONE; - } - devAttr = &DMA_gDeviceAttribute[channel->devType]; - - /* Update stats */ - - if ((irqStatus & dmacHw_INTERRUPT_STATUS_TRANS) != 0) { - devAttr->transferTicks += - (timer_get_tick_count() - devAttr->transferStartTime); - } - - if ((irqStatus & dmacHw_INTERRUPT_STATUS_ERROR) != 0) { - printk(KERN_ERR - "dma_interrupt_handler: devType :%d DMA error (%s)\n", - channel->devType, devAttr->name); - } else { - devAttr->numTransfers++; - devAttr->transferBytes += devAttr->numBytes; - } - - /* Call any installed handler */ - - if (devAttr->devHandler != NULL) { - devAttr->devHandler(channel->devType, irqStatus, - devAttr->userData); - } - - return IRQ_HANDLED; -} - -/****************************************************************************/ -/** -* Allocates memory to hold a descriptor ring. The descriptor ring then -* needs to be populated by making one or more calls to -* dna_add_descriptors. -* -* The returned descriptor ring will be automatically initialized. -* -* @return -* 0 Descriptor ring was allocated successfully -* -EINVAL Invalid parameters passed in -* -ENOMEM Unable to allocate memory for the desired number of descriptors. -*/ -/****************************************************************************/ - -int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to populate */ - int numDescriptors /* Number of descriptors that need to be allocated. */ - ) { - size_t bytesToAlloc = dmacHw_descriptorLen(numDescriptors); - - if ((ring == NULL) || (numDescriptors <= 0)) { - return -EINVAL; - } - - ring->physAddr = 0; - ring->descriptorsAllocated = 0; - ring->bytesAllocated = 0; - - ring->virtAddr = dma_alloc_writecombine(NULL, - bytesToAlloc, - &ring->physAddr, - GFP_KERNEL); - if (ring->virtAddr == NULL) { - return -ENOMEM; - } - - ring->bytesAllocated = bytesToAlloc; - ring->descriptorsAllocated = numDescriptors; - - return dma_init_descriptor_ring(ring, numDescriptors); -} - -EXPORT_SYMBOL(dma_alloc_descriptor_ring); - -/****************************************************************************/ -/** -* Releases the memory which was previously allocated for a descriptor ring. -*/ -/****************************************************************************/ - -void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring /* Descriptor to release */ - ) { - if (ring->virtAddr != NULL) { - dma_free_writecombine(NULL, - ring->bytesAllocated, - ring->virtAddr, ring->physAddr); - } - - ring->bytesAllocated = 0; - ring->descriptorsAllocated = 0; - ring->virtAddr = NULL; - ring->physAddr = 0; -} - -EXPORT_SYMBOL(dma_free_descriptor_ring); - -/****************************************************************************/ -/** -* Initializes a descriptor ring, so that descriptors can be added to it. -* Once a descriptor ring has been allocated, it may be reinitialized for -* use with additional/different regions of memory. -* -* Note that if 7 descriptors are allocated, it's perfectly acceptable to -* initialize the ring with a smaller number of descriptors. The amount -* of memory allocated for the descriptor ring will not be reduced, and -* the descriptor ring may be reinitialized later -* -* @return -* 0 Descriptor ring was initialized successfully -* -ENOMEM The descriptor which was passed in has insufficient space -* to hold the desired number of descriptors. -*/ -/****************************************************************************/ - -int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to initialize */ - int numDescriptors /* Number of descriptors to initialize. */ - ) { - if (ring->virtAddr == NULL) { - return -EINVAL; - } - if (dmacHw_initDescriptor(ring->virtAddr, - ring->physAddr, - ring->bytesAllocated, numDescriptors) < 0) { - printk(KERN_ERR - "dma_init_descriptor_ring: dmacHw_initDescriptor failed\n"); - return -ENOMEM; - } - - return 0; -} - -EXPORT_SYMBOL(dma_init_descriptor_ring); - -/****************************************************************************/ -/** -* Determines the number of descriptors which would be required for a -* transfer of the indicated memory region. -* -* This function also needs to know which DMA device this transfer will -* be destined for, so that the appropriate DMA configuration can be retrieved. -* DMA parameters such as transfer width, and whether this is a memory-to-memory -* or memory-to-peripheral, etc can all affect the actual number of descriptors -* required. -* -* @return -* > 0 Returns the number of descriptors required for the indicated transfer -* -ENODEV - Device handed in is invalid. -* -EINVAL Invalid parameters -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_calculate_descriptor_count(DMA_Device_t device, /* DMA Device that this will be associated with */ - dma_addr_t srcData, /* Place to get data to write to device */ - dma_addr_t dstData, /* Pointer to device data address */ - size_t numBytes /* Number of bytes to transfer to the device */ - ) { - int numDescriptors; - DMA_DeviceAttribute_t *devAttr; - - if (!IsDeviceValid(device)) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[device]; - - numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config, - (void *)srcData, - (void *)dstData, - numBytes); - if (numDescriptors < 0) { - printk(KERN_ERR - "dma_calculate_descriptor_count: dmacHw_calculateDescriptorCount failed\n"); - return -EINVAL; - } - - return numDescriptors; -} - -EXPORT_SYMBOL(dma_calculate_descriptor_count); - -/****************************************************************************/ -/** -* Adds a region of memory to the descriptor ring. Note that it may take -* multiple descriptors for each region of memory. It is the callers -* responsibility to allocate a sufficiently large descriptor ring. -* -* @return -* 0 Descriptors were added successfully -* -ENODEV Device handed in is invalid. -* -EINVAL Invalid parameters -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_add_descriptors(DMA_DescriptorRing_t *ring, /* Descriptor ring to add descriptors to */ - DMA_Device_t device, /* DMA Device that descriptors are for */ - dma_addr_t srcData, /* Place to get data (memory or device) */ - dma_addr_t dstData, /* Place to put data (memory or device) */ - size_t numBytes /* Number of bytes to transfer to the device */ - ) { - int rc; - DMA_DeviceAttribute_t *devAttr; - - if (!IsDeviceValid(device)) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[device]; - - rc = dmacHw_setDataDescriptor(&devAttr->config, - ring->virtAddr, - (void *)srcData, - (void *)dstData, numBytes); - if (rc < 0) { - printk(KERN_ERR - "dma_add_descriptors: dmacHw_setDataDescriptor failed with code: %d\n", - rc); - return -ENOMEM; - } - - return 0; -} - -EXPORT_SYMBOL(dma_add_descriptors); - -/****************************************************************************/ -/** -* Sets the descriptor ring associated with a device. -* -* Once set, the descriptor ring will be associated with the device, even -* across channel request/free calls. Passing in a NULL descriptor ring -* will release any descriptor ring currently associated with the device. -* -* Note: If you call dma_transfer, or one of the other dma_alloc_ functions -* the descriptor ring may be released and reallocated. -* -* Note: This function will release the descriptor memory for any current -* descriptor ring associated with this device. -* -* @return -* 0 Descriptors were added successfully -* -ENODEV Device handed in is invalid. -*/ -/****************************************************************************/ - -int dma_set_device_descriptor_ring(DMA_Device_t device, /* Device to update the descriptor ring for. */ - DMA_DescriptorRing_t *ring /* Descriptor ring to add descriptors to */ - ) { - DMA_DeviceAttribute_t *devAttr; - - if (!IsDeviceValid(device)) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[device]; - - /* Free the previously allocated descriptor ring */ - - dma_free_descriptor_ring(&devAttr->ring); - - if (ring != NULL) { - /* Copy in the new one */ - - devAttr->ring = *ring; - } - - /* Set things up so that if dma_transfer is called then this descriptor */ - /* ring will get freed. */ - - devAttr->prevSrcData = 0; - devAttr->prevDstData = 0; - devAttr->prevNumBytes = 0; - - return 0; -} - -EXPORT_SYMBOL(dma_set_device_descriptor_ring); - -/****************************************************************************/ -/** -* Retrieves the descriptor ring associated with a device. -* -* @return -* 0 Descriptors were added successfully -* -ENODEV Device handed in is invalid. -*/ -/****************************************************************************/ - -int dma_get_device_descriptor_ring(DMA_Device_t device, /* Device to retrieve the descriptor ring for. */ - DMA_DescriptorRing_t *ring /* Place to store retrieved ring */ - ) { - DMA_DeviceAttribute_t *devAttr; - - memset(ring, 0, sizeof(*ring)); - - if (!IsDeviceValid(device)) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[device]; - - *ring = devAttr->ring; - - return 0; -} - -EXPORT_SYMBOL(dma_get_device_descriptor_ring); - -/****************************************************************************/ -/** -* Configures a DMA channel. -* -* @return -* >= 0 - Initialization was successful. -* -* -EBUSY - Device is currently being used. -* -ENODEV - Device handed in is invalid. -*/ -/****************************************************************************/ - -static int ConfigChannel(DMA_Handle_t handle) -{ - DMA_Channel_t *channel; - DMA_DeviceAttribute_t *devAttr; - int controllerIdx; - - channel = HandleToChannel(handle); - if (channel == NULL) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[channel->devType]; - controllerIdx = CONTROLLER_FROM_HANDLE(handle); - - if ((devAttr->flags & DMA_DEVICE_FLAG_PORT_PER_DMAC) != 0) { - if (devAttr->config.transferType == - dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL) { - devAttr->config.dstPeripheralPort = - devAttr->dmacPort[controllerIdx]; - } else if (devAttr->config.transferType == - dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) { - devAttr->config.srcPeripheralPort = - devAttr->dmacPort[controllerIdx]; - } - } - - if (dmacHw_configChannel(channel->dmacHwHandle, &devAttr->config) != 0) { - printk(KERN_ERR "ConfigChannel: dmacHw_configChannel failed\n"); - return -EIO; - } - - return 0; -} - -/****************************************************************************/ -/** -* Initializes all of the data structures associated with the DMA. -* @return -* >= 0 - Initialization was successful. -* -* -EBUSY - Device is currently being used. -* -ENODEV - Device handed in is invalid. -*/ -/****************************************************************************/ - -int dma_init(void) -{ - int rc = 0; - int controllerIdx; - int channelIdx; - DMA_Device_t devIdx; - DMA_Channel_t *channel; - DMA_Handle_t dedicatedHandle; - - memset(&gDMA, 0, sizeof(gDMA)); - - sema_init(&gDMA.lock, 0); - init_waitqueue_head(&gDMA.freeChannelQ); - - /* Initialize the Hardware */ - - dmacHw_initDma(); - - /* Start off by marking all of the DMA channels as shared. */ - - for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS; - controllerIdx++) { - for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS; - channelIdx++) { - channel = - &gDMA.controller[controllerIdx].channel[channelIdx]; - - channel->flags = 0; - channel->devType = DMA_DEVICE_NONE; - channel->lastDevType = DMA_DEVICE_NONE; - -#if (DMA_DEBUG_TRACK_RESERVATION) - channel->fileName = ""; - channel->lineNum = 0; -#endif - - channel->dmacHwHandle = - dmacHw_getChannelHandle(dmacHw_MAKE_CHANNEL_ID - (controllerIdx, - channelIdx)); - dmacHw_initChannel(channel->dmacHwHandle); - } - } - - /* Record any special attributes that channels may have */ - - gDMA.controller[0].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO; - gDMA.controller[0].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO; - gDMA.controller[1].channel[0].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO; - gDMA.controller[1].channel[1].flags |= DMA_CHANNEL_FLAG_LARGE_FIFO; - - /* Now walk through and record the dedicated channels. */ - - for (devIdx = 0; devIdx < DMA_NUM_DEVICE_ENTRIES; devIdx++) { - DMA_DeviceAttribute_t *devAttr = &DMA_gDeviceAttribute[devIdx]; - - if (((devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) != 0) - && ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0)) { - printk(KERN_ERR - "DMA Device: %s Can only request NO_ISR for dedicated devices\n", - devAttr->name); - rc = -EINVAL; - goto out; - } - - if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) { - /* This is a dedicated device. Mark the channel as being reserved. */ - - if (devAttr->dedicatedController >= DMA_NUM_CONTROLLERS) { - printk(KERN_ERR - "DMA Device: %s DMA Controller %d is out of range\n", - devAttr->name, - devAttr->dedicatedController); - rc = -EINVAL; - goto out; - } - - if (devAttr->dedicatedChannel >= DMA_NUM_CHANNELS) { - printk(KERN_ERR - "DMA Device: %s DMA Channel %d is out of range\n", - devAttr->name, - devAttr->dedicatedChannel); - rc = -EINVAL; - goto out; - } - - dedicatedHandle = - MAKE_HANDLE(devAttr->dedicatedController, - devAttr->dedicatedChannel); - channel = HandleToChannel(dedicatedHandle); - - if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) != - 0) { - printk - ("DMA Device: %s attempting to use same DMA Controller:Channel (%d:%d) as %s\n", - devAttr->name, - devAttr->dedicatedController, - devAttr->dedicatedChannel, - DMA_gDeviceAttribute[channel->devType]. - name); - rc = -EBUSY; - goto out; - } - - channel->flags |= DMA_CHANNEL_FLAG_IS_DEDICATED; - channel->devType = devIdx; - - if (devAttr->flags & DMA_DEVICE_FLAG_NO_ISR) { - channel->flags |= DMA_CHANNEL_FLAG_NO_ISR; - } - - /* For dedicated channels, we can go ahead and configure the DMA channel now */ - /* as well. */ - - ConfigChannel(dedicatedHandle); - } - } - - /* Go through and register the interrupt handlers */ - - for (controllerIdx = 0; controllerIdx < DMA_NUM_CONTROLLERS; - controllerIdx++) { - for (channelIdx = 0; channelIdx < DMA_NUM_CHANNELS; - channelIdx++) { - channel = - &gDMA.controller[controllerIdx].channel[channelIdx]; - - if ((channel->flags & DMA_CHANNEL_FLAG_NO_ISR) == 0) { - snprintf(channel->name, sizeof(channel->name), - "dma %d:%d %s", controllerIdx, - channelIdx, - channel->devType == - DMA_DEVICE_NONE ? "" : - DMA_gDeviceAttribute[channel->devType]. - name); - - rc = - request_irq(IRQ_DMA0C0 + - (controllerIdx * - DMA_NUM_CHANNELS) + - channelIdx, - dma_interrupt_handler, - IRQF_DISABLED, channel->name, - channel); - if (rc != 0) { - printk(KERN_ERR - "request_irq for IRQ_DMA%dC%d failed\n", - controllerIdx, channelIdx); - } - } - } - } - - /* Create /proc/dma/channels and /proc/dma/devices */ - - gDmaDir = proc_mkdir("dma", NULL); - - if (gDmaDir == NULL) { - printk(KERN_ERR "Unable to create /proc/dma\n"); - } else { - create_proc_read_entry("channels", 0, gDmaDir, - dma_proc_read_channels, NULL); - create_proc_read_entry("devices", 0, gDmaDir, - dma_proc_read_devices, NULL); - } - -out: - - up(&gDMA.lock); - - return rc; -} - -/****************************************************************************/ -/** -* Reserves a channel for use with @a dev. If the device is setup to use -* a shared channel, then this function will block until a free channel -* becomes available. -* -* @return -* >= 0 - A valid DMA Handle. -* -EBUSY - Device is currently being used. -* -ENODEV - Device handed in is invalid. -*/ -/****************************************************************************/ - -#if (DMA_DEBUG_TRACK_RESERVATION) -DMA_Handle_t dma_request_channel_dbg - (DMA_Device_t dev, const char *fileName, int lineNum) -#else -DMA_Handle_t dma_request_channel(DMA_Device_t dev) -#endif -{ - DMA_Handle_t handle; - DMA_DeviceAttribute_t *devAttr; - DMA_Channel_t *channel; - int controllerIdx; - int controllerIdx2; - int channelIdx; - - if (down_interruptible(&gDMA.lock) < 0) { - return -ERESTARTSYS; - } - - if ((dev < 0) || (dev >= DMA_NUM_DEVICE_ENTRIES)) { - handle = -ENODEV; - goto out; - } - devAttr = &DMA_gDeviceAttribute[dev]; - -#if (DMA_DEBUG_TRACK_RESERVATION) - { - char *s; - - s = strrchr(fileName, '/'); - if (s != NULL) { - fileName = s + 1; - } - } -#endif - if ((devAttr->flags & DMA_DEVICE_FLAG_IN_USE) != 0) { - /* This device has already been requested and not been freed */ - - printk(KERN_ERR "%s: device %s is already requested\n", - __func__, devAttr->name); - handle = -EBUSY; - goto out; - } - - if ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) != 0) { - /* This device has a dedicated channel. */ - - channel = - &gDMA.controller[devAttr->dedicatedController]. - channel[devAttr->dedicatedChannel]; - if ((channel->flags & DMA_CHANNEL_FLAG_IN_USE) != 0) { - handle = -EBUSY; - goto out; - } - - channel->flags |= DMA_CHANNEL_FLAG_IN_USE; - devAttr->flags |= DMA_DEVICE_FLAG_IN_USE; - -#if (DMA_DEBUG_TRACK_RESERVATION) - channel->fileName = fileName; - channel->lineNum = lineNum; -#endif - handle = - MAKE_HANDLE(devAttr->dedicatedController, - devAttr->dedicatedChannel); - goto out; - } - - /* This device needs to use one of the shared channels. */ - - handle = DMA_INVALID_HANDLE; - while (handle == DMA_INVALID_HANDLE) { - /* Scan through the shared channels and see if one is available */ - - for (controllerIdx2 = 0; controllerIdx2 < DMA_NUM_CONTROLLERS; - controllerIdx2++) { - /* Check to see if we should try on controller 1 first. */ - - controllerIdx = controllerIdx2; - if ((devAttr-> - flags & DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST) != 0) { - controllerIdx = 1 - controllerIdx; - } - - /* See if the device is available on the controller being tested */ - - if ((devAttr-> - flags & (DMA_DEVICE_FLAG_ON_DMA0 << controllerIdx)) - != 0) { - for (channelIdx = 0; - channelIdx < DMA_NUM_CHANNELS; - channelIdx++) { - channel = - &gDMA.controller[controllerIdx]. - channel[channelIdx]; - - if (((channel-> - flags & - DMA_CHANNEL_FLAG_IS_DEDICATED) == - 0) - && - ((channel-> - flags & DMA_CHANNEL_FLAG_IN_USE) - == 0)) { - if (((channel-> - flags & - DMA_CHANNEL_FLAG_LARGE_FIFO) - != 0) - && - ((devAttr-> - flags & - DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO) - == 0)) { - /* This channel is a large fifo - don't tie it up */ - /* with devices that we don't want using it. */ - - continue; - } - - channel->flags |= - DMA_CHANNEL_FLAG_IN_USE; - channel->devType = dev; - devAttr->flags |= - DMA_DEVICE_FLAG_IN_USE; - -#if (DMA_DEBUG_TRACK_RESERVATION) - channel->fileName = fileName; - channel->lineNum = lineNum; -#endif - handle = - MAKE_HANDLE(controllerIdx, - channelIdx); - - /* Now that we've reserved the channel - we can go ahead and configure it */ - - if (ConfigChannel(handle) != 0) { - handle = -EIO; - printk(KERN_ERR - "dma_request_channel: ConfigChannel failed\n"); - } - goto out; - } - } - } - } - - /* No channels are currently available. Let's wait for one to free up. */ - - { - DEFINE_WAIT(wait); - - prepare_to_wait(&gDMA.freeChannelQ, &wait, - TASK_INTERRUPTIBLE); - up(&gDMA.lock); - schedule(); - finish_wait(&gDMA.freeChannelQ, &wait); - - if (signal_pending(current)) { - /* We don't currently hold gDMA.lock, so we return directly */ - - return -ERESTARTSYS; - } - } - - if (down_interruptible(&gDMA.lock)) { - return -ERESTARTSYS; - } - } - -out: - up(&gDMA.lock); - - return handle; -} - -/* Create both _dbg and non _dbg functions for modules. */ - -#if (DMA_DEBUG_TRACK_RESERVATION) -#undef dma_request_channel -DMA_Handle_t dma_request_channel(DMA_Device_t dev) -{ - return dma_request_channel_dbg(dev, __FILE__, __LINE__); -} - -EXPORT_SYMBOL(dma_request_channel_dbg); -#endif -EXPORT_SYMBOL(dma_request_channel); - -/****************************************************************************/ -/** -* Frees a previously allocated DMA Handle. -*/ -/****************************************************************************/ - -int dma_free_channel(DMA_Handle_t handle /* DMA handle. */ - ) { - int rc = 0; - DMA_Channel_t *channel; - DMA_DeviceAttribute_t *devAttr; - - if (down_interruptible(&gDMA.lock) < 0) { - return -ERESTARTSYS; - } - - channel = HandleToChannel(handle); - if (channel == NULL) { - rc = -EINVAL; - goto out; - } - - devAttr = &DMA_gDeviceAttribute[channel->devType]; - - if ((channel->flags & DMA_CHANNEL_FLAG_IS_DEDICATED) == 0) { - channel->lastDevType = channel->devType; - channel->devType = DMA_DEVICE_NONE; - } - channel->flags &= ~DMA_CHANNEL_FLAG_IN_USE; - devAttr->flags &= ~DMA_DEVICE_FLAG_IN_USE; - -out: - up(&gDMA.lock); - - wake_up_interruptible(&gDMA.freeChannelQ); - - return rc; -} - -EXPORT_SYMBOL(dma_free_channel); - -/****************************************************************************/ -/** -* Determines if a given device has been configured as using a shared -* channel. -* -* @return -* 0 Device uses a dedicated channel -* > zero Device uses a shared channel -* < zero Error code -*/ -/****************************************************************************/ - -int dma_device_is_channel_shared(DMA_Device_t device /* Device to check. */ - ) { - DMA_DeviceAttribute_t *devAttr; - - if (!IsDeviceValid(device)) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[device]; - - return ((devAttr->flags & DMA_DEVICE_FLAG_IS_DEDICATED) == 0); -} - -EXPORT_SYMBOL(dma_device_is_channel_shared); - -/****************************************************************************/ -/** -* Allocates buffers for the descriptors. This is normally done automatically -* but needs to be done explicitly when initiating a dma from interrupt -* context. -* -* @return -* 0 Descriptors were allocated successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_alloc_descriptors(DMA_Handle_t handle, /* DMA Handle */ - dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */ - dma_addr_t srcData, /* Place to get data to write to device */ - dma_addr_t dstData, /* Pointer to device data address */ - size_t numBytes /* Number of bytes to transfer to the device */ - ) { - DMA_Channel_t *channel; - DMA_DeviceAttribute_t *devAttr; - int numDescriptors; - size_t ringBytesRequired; - int rc = 0; - - channel = HandleToChannel(handle); - if (channel == NULL) { - return -ENODEV; - } - - devAttr = &DMA_gDeviceAttribute[channel->devType]; - - if (devAttr->config.transferType != transferType) { - return -EINVAL; - } - - /* Figure out how many descriptors we need. */ - - /* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */ - /* srcData, dstData, numBytes); */ - - numDescriptors = dmacHw_calculateDescriptorCount(&devAttr->config, - (void *)srcData, - (void *)dstData, - numBytes); - if (numDescriptors < 0) { - printk(KERN_ERR "%s: dmacHw_calculateDescriptorCount failed\n", - __func__); - return -EINVAL; - } - - /* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */ - /* a new one. */ - - ringBytesRequired = dmacHw_descriptorLen(numDescriptors); - - /* printk("ringBytesRequired: %d\n", ringBytesRequired); */ - - if (ringBytesRequired > devAttr->ring.bytesAllocated) { - /* Make sure that this code path is never taken from interrupt context. */ - /* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */ - /* allocation needs to have already been done. */ - - might_sleep(); - - /* Free the old descriptor ring and allocate a new one. */ - - dma_free_descriptor_ring(&devAttr->ring); - - /* And allocate a new one. */ - - rc = - dma_alloc_descriptor_ring(&devAttr->ring, - numDescriptors); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_alloc_descriptor_ring(%d) failed\n", - __func__, numDescriptors); - return rc; - } - /* Setup the descriptor for this transfer */ - - if (dmacHw_initDescriptor(devAttr->ring.virtAddr, - devAttr->ring.physAddr, - devAttr->ring.bytesAllocated, - numDescriptors) < 0) { - printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", - __func__); - return -EINVAL; - } - } else { - /* We've already got enough ring buffer allocated. All we need to do is reset */ - /* any control information, just in case the previous DMA was stopped. */ - - dmacHw_resetDescriptorControl(devAttr->ring.virtAddr); - } - - /* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */ - /* as last time, then we don't need to call setDataDescriptor again. */ - - if (dmacHw_setDataDescriptor(&devAttr->config, - devAttr->ring.virtAddr, - (void *)srcData, - (void *)dstData, numBytes) < 0) { - printk(KERN_ERR "%s: dmacHw_setDataDescriptor failed\n", - __func__); - return -EINVAL; - } - - /* Remember the critical information for this transfer so that we can eliminate */ - /* another call to dma_alloc_descriptors if the caller reuses the same buffers */ - - devAttr->prevSrcData = srcData; - devAttr->prevDstData = dstData; - devAttr->prevNumBytes = numBytes; - - return 0; -} - -EXPORT_SYMBOL(dma_alloc_descriptors); - -/****************************************************************************/ -/** -* Allocates and sets up descriptors for a double buffered circular buffer. -* -* This is primarily intended to be used for things like the ingress samples -* from a microphone. -* -* @return -* > 0 Number of descriptors actually allocated. -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */ - dma_addr_t srcData, /* Physical address of source data */ - dma_addr_t dstData1, /* Physical address of first destination buffer */ - dma_addr_t dstData2, /* Physical address of second destination buffer */ - size_t numBytes /* Number of bytes in each destination buffer */ - ) { - DMA_Channel_t *channel; - DMA_DeviceAttribute_t *devAttr; - int numDst1Descriptors; - int numDst2Descriptors; - int numDescriptors; - size_t ringBytesRequired; - int rc = 0; - - channel = HandleToChannel(handle); - if (channel == NULL) { - return -ENODEV; - } - - devAttr = &DMA_gDeviceAttribute[channel->devType]; - - /* Figure out how many descriptors we need. */ - - /* printk("srcData: 0x%08x dstData: 0x%08x, numBytes: %d\n", */ - /* srcData, dstData, numBytes); */ - - numDst1Descriptors = - dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData, - (void *)dstData1, numBytes); - if (numDst1Descriptors < 0) { - return -EINVAL; - } - numDst2Descriptors = - dmacHw_calculateDescriptorCount(&devAttr->config, (void *)srcData, - (void *)dstData2, numBytes); - if (numDst2Descriptors < 0) { - return -EINVAL; - } - numDescriptors = numDst1Descriptors + numDst2Descriptors; - /* printk("numDescriptors: %d\n", numDescriptors); */ - - /* Check to see if we can reuse the existing descriptor ring, or if we need to allocate */ - /* a new one. */ - - ringBytesRequired = dmacHw_descriptorLen(numDescriptors); - - /* printk("ringBytesRequired: %d\n", ringBytesRequired); */ - - if (ringBytesRequired > devAttr->ring.bytesAllocated) { - /* Make sure that this code path is never taken from interrupt context. */ - /* It's OK for an interrupt to initiate a DMA transfer, but the descriptor */ - /* allocation needs to have already been done. */ - - might_sleep(); - - /* Free the old descriptor ring and allocate a new one. */ - - dma_free_descriptor_ring(&devAttr->ring); - - /* And allocate a new one. */ - - rc = - dma_alloc_descriptor_ring(&devAttr->ring, - numDescriptors); - if (rc < 0) { - printk(KERN_ERR - "%s: dma_alloc_descriptor_ring(%d) failed\n", - __func__, ringBytesRequired); - return rc; - } - } - - /* Setup the descriptor for this transfer. Since this function is used with */ - /* CONTINUOUS DMA operations, we need to reinitialize every time, otherwise */ - /* setDataDescriptor will keep trying to append onto the end. */ - - if (dmacHw_initDescriptor(devAttr->ring.virtAddr, - devAttr->ring.physAddr, - devAttr->ring.bytesAllocated, - numDescriptors) < 0) { - printk(KERN_ERR "%s: dmacHw_initDescriptor failed\n", __func__); - return -EINVAL; - } - - /* dma_alloc/free both set the prevSrc/DstData to 0. If they happen to be the same */ - /* as last time, then we don't need to call setDataDescriptor again. */ - - if (dmacHw_setDataDescriptor(&devAttr->config, - devAttr->ring.virtAddr, - (void *)srcData, - (void *)dstData1, numBytes) < 0) { - printk(KERN_ERR "%s: dmacHw_setDataDescriptor 1 failed\n", - __func__); - return -EINVAL; - } - if (dmacHw_setDataDescriptor(&devAttr->config, - devAttr->ring.virtAddr, - (void *)srcData, - (void *)dstData2, numBytes) < 0) { - printk(KERN_ERR "%s: dmacHw_setDataDescriptor 2 failed\n", - __func__); - return -EINVAL; - } - - /* You should use dma_start_transfer rather than dma_transfer_xxx so we don't */ - /* try to make the 'prev' variables right. */ - - devAttr->prevSrcData = 0; - devAttr->prevDstData = 0; - devAttr->prevNumBytes = 0; - - return numDescriptors; -} - -EXPORT_SYMBOL(dma_alloc_double_dst_descriptors); - -/****************************************************************************/ -/** -* Initiates a transfer when the descriptors have already been setup. -* -* This is a special case, and normally, the dma_transfer_xxx functions should -* be used. -* -* @return -* 0 Transfer was started successfully -* -ENODEV Invalid handle -*/ -/****************************************************************************/ - -int dma_start_transfer(DMA_Handle_t handle) -{ - DMA_Channel_t *channel; - DMA_DeviceAttribute_t *devAttr; - - channel = HandleToChannel(handle); - if (channel == NULL) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[channel->devType]; - - dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config, - devAttr->ring.virtAddr); - - /* Since we got this far, everything went successfully */ - - return 0; -} - -EXPORT_SYMBOL(dma_start_transfer); - -/****************************************************************************/ -/** -* Stops a previously started DMA transfer. -* -* @return -* 0 Transfer was stopped successfully -* -ENODEV Invalid handle -*/ -/****************************************************************************/ - -int dma_stop_transfer(DMA_Handle_t handle) -{ - DMA_Channel_t *channel; - - channel = HandleToChannel(handle); - if (channel == NULL) { - return -ENODEV; - } - - dmacHw_stopTransfer(channel->dmacHwHandle); - - return 0; -} - -EXPORT_SYMBOL(dma_stop_transfer); - -/****************************************************************************/ -/** -* Waits for a DMA to complete by polling. This function is only intended -* to be used for testing. Interrupts should be used for most DMA operations. -*/ -/****************************************************************************/ - -int dma_wait_transfer_done(DMA_Handle_t handle) -{ - DMA_Channel_t *channel; - dmacHw_TRANSFER_STATUS_e status; - - channel = HandleToChannel(handle); - if (channel == NULL) { - return -ENODEV; - } - - while ((status = - dmacHw_transferCompleted(channel->dmacHwHandle)) == - dmacHw_TRANSFER_STATUS_BUSY) { - ; - } - - if (status == dmacHw_TRANSFER_STATUS_ERROR) { - printk(KERN_ERR "%s: DMA transfer failed\n", __func__); - return -EIO; - } - return 0; -} - -EXPORT_SYMBOL(dma_wait_transfer_done); - -/****************************************************************************/ -/** -* Initiates a DMA, allocating the descriptors as required. -* -* @return -* 0 Transfer was started successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV) -*/ -/****************************************************************************/ - -int dma_transfer(DMA_Handle_t handle, /* DMA Handle */ - dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */ - dma_addr_t srcData, /* Place to get data to write to device */ - dma_addr_t dstData, /* Pointer to device data address */ - size_t numBytes /* Number of bytes to transfer to the device */ - ) { - DMA_Channel_t *channel; - DMA_DeviceAttribute_t *devAttr; - int rc = 0; - - channel = HandleToChannel(handle); - if (channel == NULL) { - return -ENODEV; - } - - devAttr = &DMA_gDeviceAttribute[channel->devType]; - - if (devAttr->config.transferType != transferType) { - return -EINVAL; - } - - /* We keep track of the information about the previous request for this */ - /* device, and if the attributes match, then we can use the descriptors we setup */ - /* the last time, and not have to reinitialize everything. */ - - { - rc = - dma_alloc_descriptors(handle, transferType, srcData, - dstData, numBytes); - if (rc != 0) { - return rc; - } - } - - /* And kick off the transfer */ - - devAttr->numBytes = numBytes; - devAttr->transferStartTime = timer_get_tick_count(); - - dmacHw_initiateTransfer(channel->dmacHwHandle, &devAttr->config, - devAttr->ring.virtAddr); - - /* Since we got this far, everything went successfully */ - - return 0; -} - -EXPORT_SYMBOL(dma_transfer); - -/****************************************************************************/ -/** -* Set the callback function which will be called when a transfer completes. -* If a NULL callback function is set, then no callback will occur. -* -* @note @a devHandler will be called from IRQ context. -* -* @return -* 0 - Success -* -ENODEV - Device handed in is invalid. -*/ -/****************************************************************************/ - -int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. */ - DMA_DeviceHandler_t devHandler, /* Function to call when the DMA completes */ - void *userData /* Pointer which will be passed to devHandler. */ - ) { - DMA_DeviceAttribute_t *devAttr; - unsigned long flags; - - if (!IsDeviceValid(dev)) { - return -ENODEV; - } - devAttr = &DMA_gDeviceAttribute[dev]; - - local_irq_save(flags); - - devAttr->userData = userData; - devAttr->devHandler = devHandler; - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(dma_set_device_handler); diff --git a/arch/arm/mach-bcmring/dma_device.c b/arch/arm/mach-bcmring/dma_device.c deleted file mode 100644 index ca0ad736870bbf940687bbe1662b218d4c9a40c6..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/dma_device.c +++ /dev/null @@ -1,593 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dma_device.c -* -* @brief private array of DMA_DeviceAttribute_t -*/ -/****************************************************************************/ - -DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES] = { - [DMA_DEVICE_MEM_TO_MEM] = /* MEM 2 MEM */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1, - .name = "mem-to-mem", - .config = { - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - - }, - }, - [DMA_DEVICE_VPM_MEM_TO_MEM] = /* VPM */ - { - .flags = DMA_DEVICE_FLAG_IS_DEDICATED | DMA_DEVICE_FLAG_NO_ISR, - .name = "vpm", - .dedicatedController = 0, - .dedicatedChannel = 0, - /* reserve DMA0:0 for VPM */ - }, - [DMA_DEVICE_NAND_MEM_TO_MEM] = /* NAND */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1, - .name = "nand", - .config = { - .srcPeripheralPort = 0, - .dstPeripheralPort = 0, - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_6, - }, - }, - [DMA_DEVICE_PIF_MEM_TO_DEV] = /* PIF TX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1 - | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO - | DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST | DMA_DEVICE_FLAG_PORT_PER_DMAC, - .name = "pif_tx", - .dmacPort = {14, 5}, - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - /* dstPeripheralPort = 5 or 14 */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8, - .maxDataPerBlock = 16256, - }, - }, - [DMA_DEVICE_PIF_DEV_TO_MEM] = /* PIF RX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1 - | DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO - /* DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST */ - | DMA_DEVICE_FLAG_PORT_PER_DMAC, - .name = "pif_rx", - .dmacPort = {14, 5}, - .config = { - /* srcPeripheralPort = 5 or 14 */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8, - .maxDataPerBlock = 16256, - }, - }, - [DMA_DEVICE_I2S0_DEV_TO_MEM] = /* I2S RX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "i2s0_rx", - .config = { - .srcPeripheralPort = 0, /* SRC: I2S0 */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0, - .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS, - }, - }, - [DMA_DEVICE_I2S0_MEM_TO_DEV] = /* I2S TX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "i2s0_tx", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 1, /* DST: I2S0 */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - }, - }, - [DMA_DEVICE_I2S1_DEV_TO_MEM] = /* I2S1 RX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA1, - .name = "i2s1_rx", - .config = { - .srcPeripheralPort = 2, /* SRC: I2S1 */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_16, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0, - .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS, - }, - }, - [DMA_DEVICE_I2S1_MEM_TO_DEV] = /* I2S1 TX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA1, - .name = "i2s1_tx", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 3, /* DST: I2S1 */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_16, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - }, - }, - [DMA_DEVICE_ESW_MEM_TO_DEV] = /* ESW TX */ - { - .name = "esw_tx", - .flags = DMA_DEVICE_FLAG_IS_DEDICATED, - .dedicatedController = 1, - .dedicatedChannel = 3, - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 1, /* DST: ESW (MTP) */ - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_DISABLE, - /* DMAx_AHB_SSTATARy */ - .srcStatusRegisterAddress = 0x00000000, - /* DMAx_AHB_DSTATARy */ - .dstStatusRegisterAddress = 0x30490010, - /* DMAx_AHB_CFGy */ - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - /* DMAx_AHB_CTLy */ - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_0, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - }, - }, - [DMA_DEVICE_ESW_DEV_TO_MEM] = /* ESW RX */ - { - .name = "esw_rx", - .flags = DMA_DEVICE_FLAG_IS_DEDICATED, - .dedicatedController = 1, - .dedicatedChannel = 2, - .config = { - .srcPeripheralPort = 0, /* SRC: ESW (PTM) */ - .dstPeripheralPort = 0, /* DST: memory */ - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_DISABLE, - /* DMAx_AHB_SSTATARy */ - .srcStatusRegisterAddress = 0x30480010, - /* DMAx_AHB_DSTATARy */ - .dstStatusRegisterAddress = 0x00000000, - /* DMAx_AHB_CFGy */ - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - /* DMAx_AHB_CTLy */ - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_0, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - }, - }, - [DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM] = /* APM Codec A Ingress */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "apm_a_rx", - .config = { - .srcPeripheralPort = 2, /* SRC: Codec A Ingress FIFO */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS, - }, - }, - [DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV] = /* APM Codec A Egress */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "apm_a_tx", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 3, /* DST: Codec A Egress FIFO */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - }, - }, - [DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM] = /* APM Codec B Ingress */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "apm_b_rx", - .config = { - .srcPeripheralPort = 4, /* SRC: Codec B Ingress FIFO */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS, - }, - }, - [DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV] = /* APM Codec B Egress */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "apm_b_tx", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 5, /* DST: Codec B Egress FIFO */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - }, - }, - [DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM] = /* APM Codec C Ingress */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA1, - .name = "apm_c_rx", - .config = { - .srcPeripheralPort = 4, /* SRC: Codec C Ingress FIFO */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS, - }, - }, - [DMA_DEVICE_APM_PCM0_DEV_TO_MEM] = /* PCM0 RX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "pcm0_rx", - .config = { - .srcPeripheralPort = 12, /* SRC: PCM0 */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS, - }, - }, - [DMA_DEVICE_APM_PCM0_MEM_TO_DEV] = /* PCM0 TX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0, - .name = "pcm0_tx", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 13, /* DST: PCM0 */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - }, - }, - [DMA_DEVICE_APM_PCM1_DEV_TO_MEM] = /* PCM1 RX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA1, - .name = "pcm1_rx", - .config = { - .srcPeripheralPort = 14, /* SRC: PCM1 */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_4, - .blockTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_CONTINUOUS, - }, - }, - [DMA_DEVICE_APM_PCM1_MEM_TO_DEV] = /* PCM1 TX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA1, - .name = "pcm1_tx", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 15, /* DST: PCM1 */ - .srcStatusRegisterAddress = 0, - .dstStatusRegisterAddress = 0, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_4, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - }, - }, - [DMA_DEVICE_SPUM_DEV_TO_MEM] = /* SPUM RX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1, - .name = "spum_rx", - .config = { - .srcPeripheralPort = 6, /* SRC: Codec A Ingress FIFO */ - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - /* Busrt size **MUST** be 16 for SPUM to work */ - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - /* on the RX side, SPU needs to be the flow controller */ - .flowControler = dmacHw_FLOW_CONTROL_PERIPHERAL, - }, - }, - [DMA_DEVICE_SPUM_MEM_TO_DEV] = /* SPUM TX */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1, - .name = "spum_tx", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .dstPeripheralPort = 7, /* DST: SPUM */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2, - .blockTransferInterrupt = dmacHw_INTERRUPT_DISABLE, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_32, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_32, - /* Busrt size **MUST** be 16 for SPUM to work */ - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_16, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_16, - .transferMode = dmacHw_TRANSFER_MODE_PERREQUEST, - }, - }, - [DMA_DEVICE_MEM_TO_VRAM] = /* MEM 2 VRAM */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1, - .name = "mem-to-vram", - .config = { - .srcPeripheralPort = 0, /* SRC: memory */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_1, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_2, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8, - }, - }, - [DMA_DEVICE_VRAM_TO_MEM] = /* VRAM 2 MEM */ - { - .flags = DMA_DEVICE_FLAG_ON_DMA0 | DMA_DEVICE_FLAG_ON_DMA1, - .name = "vram-to-mem", - .config = { - .dstPeripheralPort = 0, /* DST: memory */ - .srcStatusRegisterAddress = 0x00000000, - .dstStatusRegisterAddress = 0x00000000, - .srcUpdate = dmacHw_SRC_ADDRESS_UPDATE_MODE_INC, - .dstUpdate = dmacHw_DST_ADDRESS_UPDATE_MODE_INC, - .transferType = dmacHw_TRANSFER_TYPE_MEM_TO_MEM, - .srcMasterInterface = dmacHw_SRC_MASTER_INTERFACE_2, - .dstMasterInterface = dmacHw_DST_MASTER_INTERFACE_1, - .completeTransferInterrupt = dmacHw_INTERRUPT_ENABLE, - .errorInterrupt = dmacHw_INTERRUPT_ENABLE, - .channelPriority = dmacHw_CHANNEL_PRIORITY_7, - .srcMaxTransactionWidth = dmacHw_SRC_TRANSACTION_WIDTH_64, - .dstMaxTransactionWidth = dmacHw_DST_TRANSACTION_WIDTH_64, - .srcMaxBurstWidth = dmacHw_SRC_BURST_WIDTH_8, - .dstMaxBurstWidth = dmacHw_DST_BURST_WIDTH_8, - }, - }, -}; -EXPORT_SYMBOL(DMA_gDeviceAttribute); /* primarily for dma-test.c */ diff --git a/arch/arm/mach-bcmring/include/cfg_global.h b/arch/arm/mach-bcmring/include/cfg_global.h deleted file mode 100644 index f01da877148efc635fa5ac8b09dcc01ed99b2dbd..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/cfg_global.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _CFG_GLOBAL_H_ -#define _CFG_GLOBAL_H_ - -#include - -#define CFG_GLOBAL_CHIP BCM11107 -#define CFG_GLOBAL_CHIP_FAMILY CFG_GLOBAL_CHIP_FAMILY_BCMRING -#define CFG_GLOBAL_CHIP_REV 0xB0 -#define CFG_GLOBAL_RAM_SIZE 0x10000000 -#define CFG_GLOBAL_RAM_BASE 0x00000000 -#define CFG_GLOBAL_RAM_RESERVED_SIZE 0x000000 - -#endif /* _CFG_GLOBAL_H_ */ diff --git a/arch/arm/mach-bcmring/include/cfg_global_defines.h b/arch/arm/mach-bcmring/include/cfg_global_defines.h deleted file mode 100644 index b5beb0b3073490d0000e8883a9bf352fc1e8509a..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/cfg_global_defines.h +++ /dev/null @@ -1,40 +0,0 @@ -/***************************************************************************** -* Copyright 2006 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CFG_GLOBAL_DEFINES_H -#define CFG_GLOBAL_DEFINES_H - -/* CHIP */ -#define BCM1103 1 - -#define BCM1191 4 -#define BCM2153 5 -#define BCM2820 6 - -#define BCM2826 8 -#define FPGA11107 9 -#define BCM11107 10 -#define BCM11109 11 -#define BCM11170 12 -#define BCM11110 13 -#define BCM11211 14 - -/* CFG_GLOBAL_CHIP_FAMILY types */ -#define CFG_GLOBAL_CHIP_FAMILY_NONE 0 -#define CFG_GLOBAL_CHIP_FAMILY_BCM116X 2 -#define CFG_GLOBAL_CHIP_FAMILY_BCMRING 4 -#define CFG_GLOBAL_CHIP_FAMILY_BCM1103 8 - -#define IMAGE_HEADER_SIZE_CHECKSUM 4 -#endif diff --git a/arch/arm/mach-bcmring/include/csp/cache.h b/arch/arm/mach-bcmring/include/csp/cache.h deleted file mode 100644 index caa20e59db99a346b49c0fa7e53f78079a0a4a19..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/csp/cache.h +++ /dev/null @@ -1,35 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CSP_CACHE_H -#define CSP_CACHE_H - -/* ---- Include Files ---------------------------------------------------- */ - -#include - -/* ---- Public Constants and Types --------------------------------------- */ - -#if defined(__KERNEL__) && !defined(STANDALONE) -#include - -#define CSP_CACHE_FLUSH_ALL flush_cache_all() - -#else - -#define CSP_CACHE_FLUSH_ALL - -#endif - -#endif /* CSP_CACHE_H */ diff --git a/arch/arm/mach-bcmring/include/csp/delay.h b/arch/arm/mach-bcmring/include/csp/delay.h deleted file mode 100644 index 8b3d803672938cab619a73be7f9cd18b4d5d7d3b..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/csp/delay.h +++ /dev/null @@ -1,36 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - -#ifndef CSP_DELAY_H -#define CSP_DELAY_H - -/* ---- Include Files ---------------------------------------------------- */ - -/* Some CSP routines require use of the following delay routines. Use the OS */ -/* version if available, otherwise use a CSP specific definition. */ -/* void udelay(unsigned long usecs); */ -/* void mdelay(unsigned long msecs); */ - -#if defined(__KERNEL__) && !defined(STANDALONE) - #include -#else - #include -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* CSP_DELAY_H */ diff --git a/arch/arm/mach-bcmring/include/csp/dmacHw.h b/arch/arm/mach-bcmring/include/csp/dmacHw.h deleted file mode 100644 index e6a1dc484ca728f761a1a57c7cc73b0448371750..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/csp/dmacHw.h +++ /dev/null @@ -1,596 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dmacHw.h -* -* @brief API definitions for low level DMA controller driver -* -*/ -/****************************************************************************/ -#ifndef _DMACHW_H -#define _DMACHW_H - -#include - -#include -#include - -/* Define DMA Channel ID using DMA controller number (m) and channel number (c). - - System specific channel ID should be defined as follows - - For example: - - #include - ... - #define systemHw_LCD_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,5) - #define systemHw_SWITCH_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,0) - #define systemHw_SWITCH_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,1) - #define systemHw_APM_RX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,3) - #define systemHw_APM_TX_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,4) - ... - #define systemHw_SHARED1_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,4) - #define systemHw_SHARED2_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(1,5) - #define systemHw_SHARED3_CHANNEL_ID dmacHw_MAKE_CHANNEL_ID(0,6) - ... -*/ -#define dmacHw_MAKE_CHANNEL_ID(m, c) (m << 8 | c) - -typedef enum { - dmacHw_CHANNEL_PRIORITY_0 = dmacHw_REG_CFG_LO_CH_PRIORITY_0, /* Channel priority 0. Lowest priority DMA channel */ - dmacHw_CHANNEL_PRIORITY_1 = dmacHw_REG_CFG_LO_CH_PRIORITY_1, /* Channel priority 1 */ - dmacHw_CHANNEL_PRIORITY_2 = dmacHw_REG_CFG_LO_CH_PRIORITY_2, /* Channel priority 2 */ - dmacHw_CHANNEL_PRIORITY_3 = dmacHw_REG_CFG_LO_CH_PRIORITY_3, /* Channel priority 3 */ - dmacHw_CHANNEL_PRIORITY_4 = dmacHw_REG_CFG_LO_CH_PRIORITY_4, /* Channel priority 4 */ - dmacHw_CHANNEL_PRIORITY_5 = dmacHw_REG_CFG_LO_CH_PRIORITY_5, /* Channel priority 5 */ - dmacHw_CHANNEL_PRIORITY_6 = dmacHw_REG_CFG_LO_CH_PRIORITY_6, /* Channel priority 6 */ - dmacHw_CHANNEL_PRIORITY_7 = dmacHw_REG_CFG_LO_CH_PRIORITY_7 /* Channel priority 7. Highest priority DMA channel */ -} dmacHw_CHANNEL_PRIORITY_e; - -/* Source destination master interface */ -typedef enum { - dmacHw_SRC_MASTER_INTERFACE_1 = dmacHw_REG_CTL_SMS_1, /* Source DMA master interface 1 */ - dmacHw_SRC_MASTER_INTERFACE_2 = dmacHw_REG_CTL_SMS_2, /* Source DMA master interface 2 */ - dmacHw_DST_MASTER_INTERFACE_1 = dmacHw_REG_CTL_DMS_1, /* Destination DMA master interface 1 */ - dmacHw_DST_MASTER_INTERFACE_2 = dmacHw_REG_CTL_DMS_2 /* Destination DMA master interface 2 */ -} dmacHw_MASTER_INTERFACE_e; - -typedef enum { - dmacHw_SRC_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_SRC_TR_WIDTH_8, /* Source 8 bit (1 byte) per transaction */ - dmacHw_SRC_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_SRC_TR_WIDTH_16, /* Source 16 bit (2 byte) per transaction */ - dmacHw_SRC_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_SRC_TR_WIDTH_32, /* Source 32 bit (4 byte) per transaction */ - dmacHw_SRC_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_SRC_TR_WIDTH_64, /* Source 64 bit (8 byte) per transaction */ - dmacHw_DST_TRANSACTION_WIDTH_8 = dmacHw_REG_CTL_DST_TR_WIDTH_8, /* Destination 8 bit (1 byte) per transaction */ - dmacHw_DST_TRANSACTION_WIDTH_16 = dmacHw_REG_CTL_DST_TR_WIDTH_16, /* Destination 16 bit (2 byte) per transaction */ - dmacHw_DST_TRANSACTION_WIDTH_32 = dmacHw_REG_CTL_DST_TR_WIDTH_32, /* Destination 32 bit (4 byte) per transaction */ - dmacHw_DST_TRANSACTION_WIDTH_64 = dmacHw_REG_CTL_DST_TR_WIDTH_64 /* Destination 64 bit (8 byte) per transaction */ -} dmacHw_TRANSACTION_WIDTH_e; - -typedef enum { - dmacHw_SRC_BURST_WIDTH_0 = dmacHw_REG_CTL_SRC_MSIZE_0, /* Source No burst */ - dmacHw_SRC_BURST_WIDTH_4 = dmacHw_REG_CTL_SRC_MSIZE_4, /* Source 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_SRC_BURST_WIDTH_8 = dmacHw_REG_CTL_SRC_MSIZE_8, /* Source 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_SRC_BURST_WIDTH_16 = dmacHw_REG_CTL_SRC_MSIZE_16, /* Source 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_DST_BURST_WIDTH_0 = dmacHw_REG_CTL_DST_MSIZE_0, /* Destination No burst */ - dmacHw_DST_BURST_WIDTH_4 = dmacHw_REG_CTL_DST_MSIZE_4, /* Destination 4 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_DST_BURST_WIDTH_8 = dmacHw_REG_CTL_DST_MSIZE_8, /* Destination 8 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ - dmacHw_DST_BURST_WIDTH_16 = dmacHw_REG_CTL_DST_MSIZE_16 /* Destination 16 X dmacHw_TRANSACTION_WIDTH_xxx bytes per burst */ -} dmacHw_BURST_WIDTH_e; - -typedef enum { - dmacHw_TRANSFER_TYPE_MEM_TO_MEM = dmacHw_REG_CTL_TTFC_MM_DMAC, /* Memory to memory transfer */ - dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM = dmacHw_REG_CTL_TTFC_PM_DMAC, /* Peripheral to memory transfer */ - dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_MP_DMAC, /* Memory to peripheral transfer */ - dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_PERIPHERAL = dmacHw_REG_CTL_TTFC_PP_DMAC /* Peripheral to peripheral transfer */ -} dmacHw_TRANSFER_TYPE_e; - -typedef enum { - dmacHw_TRANSFER_MODE_PERREQUEST, /* Block transfer per DMA request */ - dmacHw_TRANSFER_MODE_CONTINUOUS, /* Continuous transfer of streaming data */ - dmacHw_TRANSFER_MODE_PERIODIC /* Periodic transfer of streaming data */ -} dmacHw_TRANSFER_MODE_e; - -typedef enum { - dmacHw_SRC_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_SINC_INC, /* Increment source address after every transaction */ - dmacHw_SRC_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_SINC_DEC, /* Decrement source address after every transaction */ - dmacHw_DST_ADDRESS_UPDATE_MODE_INC = dmacHw_REG_CTL_DINC_INC, /* Increment destination address after every transaction */ - dmacHw_DST_ADDRESS_UPDATE_MODE_DEC = dmacHw_REG_CTL_DINC_DEC, /* Decrement destination address after every transaction */ - dmacHw_SRC_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_SINC_NC, /* No change in source address after every transaction */ - dmacHw_DST_ADDRESS_UPDATE_MODE_NC = dmacHw_REG_CTL_DINC_NC /* No change in destination address after every transaction */ -} dmacHw_ADDRESS_UPDATE_MODE_e; - -typedef enum { - dmacHw_FLOW_CONTROL_DMA, /* DMA working as flow controller (default) */ - dmacHw_FLOW_CONTROL_PERIPHERAL /* Peripheral working as flow controller */ -} dmacHw_FLOW_CONTROL_e; - -typedef enum { - dmacHw_TRANSFER_STATUS_BUSY, /* DMA Transfer ongoing */ - dmacHw_TRANSFER_STATUS_DONE, /* DMA Transfer completed */ - dmacHw_TRANSFER_STATUS_ERROR /* DMA Transfer error */ -} dmacHw_TRANSFER_STATUS_e; - -typedef enum { - dmacHw_INTERRUPT_DISABLE, /* Interrupt disable */ - dmacHw_INTERRUPT_ENABLE /* Interrupt enable */ -} dmacHw_INTERRUPT_e; - -typedef enum { - dmacHw_INTERRUPT_STATUS_NONE = 0x0, /* No DMA interrupt */ - dmacHw_INTERRUPT_STATUS_TRANS = 0x1, /* End of DMA transfer interrupt */ - dmacHw_INTERRUPT_STATUS_BLOCK = 0x2, /* End of block transfer interrupt */ - dmacHw_INTERRUPT_STATUS_ERROR = 0x4 /* Error interrupt */ -} dmacHw_INTERRUPT_STATUS_e; - -typedef enum { - dmacHw_CONTROLLER_ATTRIB_CHANNEL_NUM, /* Number of DMA channel */ - dmacHw_CONTROLLER_ATTRIB_CHANNEL_MAX_BLOCK_SIZE, /* Maximum channel burst size */ - dmacHw_CONTROLLER_ATTRIB_MASTER_INTF_NUM, /* Number of DMA master interface */ - dmacHw_CONTROLLER_ATTRIB_CHANNEL_BUS_WIDTH, /* Channel Data bus width */ - dmacHw_CONTROLLER_ATTRIB_CHANNEL_FIFO_SIZE /* Channel FIFO size */ -} dmacHw_CONTROLLER_ATTRIB_e; - -typedef unsigned long dmacHw_HANDLE_t; /* DMA channel handle */ -typedef uint32_t dmacHw_ID_t; /* DMA channel Id. Must be created using - "dmacHw_MAKE_CHANNEL_ID" macro - */ -/* DMA channel configuration parameters */ -typedef struct { - uint32_t srcPeripheralPort; /* Source peripheral port */ - uint32_t dstPeripheralPort; /* Destination peripheral port */ - uint32_t srcStatusRegisterAddress; /* Source status register address */ - uint32_t dstStatusRegisterAddress; /* Destination status register address of type */ - - uint32_t srcGatherWidth; /* Number of bytes gathered before successive gather opearation */ - uint32_t srcGatherJump; /* Number of bytes jumpped before successive gather opearation */ - uint32_t dstScatterWidth; /* Number of bytes sacattered before successive scatter opearation */ - uint32_t dstScatterJump; /* Number of bytes jumpped before successive scatter opearation */ - uint32_t maxDataPerBlock; /* Maximum number of bytes to be transferred per block/descrptor. - 0 = Maximum possible. - */ - - dmacHw_ADDRESS_UPDATE_MODE_e srcUpdate; /* Source address update mode */ - dmacHw_ADDRESS_UPDATE_MODE_e dstUpdate; /* Destination address update mode */ - dmacHw_TRANSFER_TYPE_e transferType; /* DMA transfer type */ - dmacHw_TRANSFER_MODE_e transferMode; /* DMA transfer mode */ - dmacHw_MASTER_INTERFACE_e srcMasterInterface; /* DMA source interface */ - dmacHw_MASTER_INTERFACE_e dstMasterInterface; /* DMA destination interface */ - dmacHw_TRANSACTION_WIDTH_e srcMaxTransactionWidth; /* Source transaction width */ - dmacHw_TRANSACTION_WIDTH_e dstMaxTransactionWidth; /* Destination transaction width */ - dmacHw_BURST_WIDTH_e srcMaxBurstWidth; /* Source burst width */ - dmacHw_BURST_WIDTH_e dstMaxBurstWidth; /* Destination burst width */ - dmacHw_INTERRUPT_e blockTransferInterrupt; /* Block trsnafer interrupt */ - dmacHw_INTERRUPT_e completeTransferInterrupt; /* Complete DMA trsnafer interrupt */ - dmacHw_INTERRUPT_e errorInterrupt; /* Error interrupt */ - dmacHw_CHANNEL_PRIORITY_e channelPriority; /* Channel priority */ - dmacHw_FLOW_CONTROL_e flowControler; /* Data flow controller */ -} dmacHw_CONFIG_t; - -/****************************************************************************/ -/** -* @brief Initializes DMA -* -* This function initializes DMA CSP driver -* -* @note -* Must be called before using any DMA channel -*/ -/****************************************************************************/ -void dmacHw_initDma(void); - -/****************************************************************************/ -/** -* @brief Exit function for DMA -* -* This function isolates DMA from the system -* -*/ -/****************************************************************************/ -void dmacHw_exitDma(void); - -/****************************************************************************/ -/** -* @brief Gets a handle to a DMA channel -* -* This function returns a handle, representing a control block of a particular DMA channel -* -* @return -1 - On Failure -* handle - On Success, representing a channel control block -* -* @note -* None Channel ID must be created using "dmacHw_MAKE_CHANNEL_ID" macro -*/ -/****************************************************************************/ -dmacHw_HANDLE_t dmacHw_getChannelHandle(dmacHw_ID_t channelId /* [ IN ] DMA Channel Id */ - ); - -/****************************************************************************/ -/** -* @brief Initializes a DMA channel for use -* -* This function initializes and resets a DMA channel for use -* -* @return -1 - On Failure -* 0 - On Success -* -* @note -* None -*/ -/****************************************************************************/ -int dmacHw_initChannel(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Estimates number of descriptor needed to perform certain DMA transfer -* -* -* @return On failure : -1 -* On success : Number of descriptor count -* -* -*/ -/****************************************************************************/ -int dmacHw_calculateDescriptorCount(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */ - void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */ - size_t dataLen /* [ IN ] Data length in bytes */ - ); - -/****************************************************************************/ -/** -* @brief Initializes descriptor ring -* -* This function will initializes the descriptor ring of a DMA channel -* -* -* @return -1 - On failure -* 0 - On success -* @note -* - "len" parameter should be obtained from "dmacHw_descriptorLen" -* - Descriptor buffer MUST be 32 bit aligned and uncached as it -* is accessed by ARM and DMA -*/ -/****************************************************************************/ -int dmacHw_initDescriptor(void *pDescriptorVirt, /* [ IN ] Virtual address of uncahced buffer allocated to form descriptor ring */ - uint32_t descriptorPhyAddr, /* [ IN ] Physical address of pDescriptorVirt (descriptor buffer) */ - uint32_t len, /* [ IN ] Size of the pBuf */ - uint32_t num /* [ IN ] Number of descriptor in the ring */ - ); - -/****************************************************************************/ -/** -* @brief Finds amount of memory required to form a descriptor ring -* -* -* @return Number of bytes required to form a descriptor ring -* -* -* @note -* None -*/ -/****************************************************************************/ -uint32_t dmacHw_descriptorLen(uint32_t descCnt /* [ IN ] Number of descriptor in the ring */ - ); - -/****************************************************************************/ -/** -* @brief Configure DMA channel -* -* @return 0 : On success -* -1 : On failure -*/ -/****************************************************************************/ -int dmacHw_configChannel(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig /* [ IN ] Configuration settings */ - ); - -/****************************************************************************/ -/** -* @brief Set descriptors for known data length -* -* When DMA has to work as a flow controller, this function prepares the -* descriptor chain to transfer data -* -* from: -* - Memory to memory -* - Peripheral to memory -* - Memory to Peripheral -* - Peripheral to Peripheral -* -* @return -1 - On failure -* 0 - On success -* -*/ -/****************************************************************************/ -int dmacHw_setDataDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void *pSrcAddr, /* [ IN ] Source (Peripheral/Memory) address */ - void *pDstAddr, /* [ IN ] Destination (Peripheral/Memory) address */ - size_t dataLen /* [ IN ] Length in bytes */ - ); - -/****************************************************************************/ -/** -* @brief Indicates whether DMA transfer is in progress or completed -* -* @return DMA transfer status -* dmacHw_TRANSFER_STATUS_BUSY: DMA Transfer ongoing -* dmacHw_TRANSFER_STATUS_DONE: DMA Transfer completed -* dmacHw_TRANSFER_STATUS_ERROR: DMA Transfer error -* -*/ -/****************************************************************************/ -dmacHw_TRANSFER_STATUS_e dmacHw_transferCompleted(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Set descriptor carrying control information -* -* This function will be used to send specific control information to the device -* using the DMA channel -* -* -* @return -1 - On failure -* 0 - On success -* -* @note -* None -*/ -/****************************************************************************/ -int dmacHw_setControlDescriptor(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - uint32_t ctlAddress, /* [ IN ] Address of the device control register */ - uint32_t control /* [ IN ] Device control information */ - ); - -/****************************************************************************/ -/** -* @brief Read data DMA transferred to memory -* -* This function will read data that has been DMAed to memory while transferring from: -* - Memory to memory -* - Peripheral to memory -* -* @return 0 - No more data is available to read -* 1 - More data might be available to read -* -*/ -/****************************************************************************/ -int dmacHw_readTransferredData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void **ppBbuf, /* [ OUT ] Data received */ - size_t *pLlen /* [ OUT ] Length of the data received */ - ); - -/****************************************************************************/ -/** -* @brief Prepares descriptor ring, when source peripheral working as a flow controller -* -* This function will form the descriptor ring by allocating buffers, when source peripheral -* has to work as a flow controller to transfer data from: -* - Peripheral to memory. -* -* @return -1 - On failure -* 0 - On success -* -* -* @note -* None -*/ -/****************************************************************************/ -int dmacHw_setVariableDataDescriptor(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - uint32_t srcAddr, /* [ IN ] Source peripheral address */ - void *(*fpAlloc) (int len), /* [ IN ] Function pointer that provides destination memory */ - int len, /* [ IN ] Number of bytes "fpAlloc" will allocate for destination */ - int num /* [ IN ] Number of descriptor to set */ - ); - -/****************************************************************************/ -/** -* @brief Program channel register to initiate transfer -* -* @return void -* -* -* @note -* - Descriptor buffer MUST ALWAYS be flushed before calling this function -* - This function should also be called from ISR to program the channel with -* pending descriptors -*/ -/****************************************************************************/ -void dmacHw_initiateTransfer(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor /* [ IN ] Descriptor buffer */ - ); - -/****************************************************************************/ -/** -* @brief Resets descriptor control information -* -* @return void -*/ -/****************************************************************************/ -void dmacHw_resetDescriptorControl(void *pDescriptor /* [ IN ] Descriptor buffer */ - ); - -/****************************************************************************/ -/** -* @brief Program channel register to stop transfer -* -* Ensures the channel is not doing any transfer after calling this function -* -* @return void -* -*/ -/****************************************************************************/ -void dmacHw_stopTransfer(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Check the existence of pending descriptor -* -* This function confirmes if there is any pending descriptor in the chain -* to program the channel -* -* @return 1 : Channel need to be programmed with pending descriptor -* 0 : No more pending descriptor to programe the channel -* -* @note -* - This function should be called from ISR in case there are pending -* descriptor to program the channel. -* -* Example: -* -* dmac_isr () -* { -* ... -* if (dmacHw_descriptorPending (handle)) -* { -* dmacHw_initiateTransfer (handle); -* } -* } -* -*/ -/****************************************************************************/ -uint32_t dmacHw_descriptorPending(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *pDescriptor /* [ IN ] Descriptor buffer */ - ); - -/****************************************************************************/ -/** -* @brief Deallocates source or destination memory, allocated -* -* This function can be called to deallocate data memory that was DMAed successfully -* -* @return -1 - On failure -* 0 - On success -* -* @note -* This function will be called ONLY, when source OR destination address is pointing -* to dynamic memory -*/ -/****************************************************************************/ -int dmacHw_freeMem(dmacHw_CONFIG_t *pConfig, /* [ IN ] Configuration settings */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - void (*fpFree) (void *) /* [ IN ] Function pointer to free data memory */ - ); - -/****************************************************************************/ -/** -* @brief Clears the interrupt -* -* This function clears the DMA channel specific interrupt -* -* @return N/A -* -* @note -* Must be called under the context of ISR -*/ -/****************************************************************************/ -void dmacHw_clearInterrupt(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Returns the cause of channel specific DMA interrupt -* -* This function returns the cause of interrupt -* -* @return Interrupt status, each bit representing a specific type of interrupt -* of type dmacHw_INTERRUPT_STATUS_e -* @note -* This function should be called under the context of ISR -*/ -/****************************************************************************/ -dmacHw_INTERRUPT_STATUS_e dmacHw_getInterruptStatus(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Indentifies a DMA channel causing interrupt -* -* This functions returns a channel causing interrupt of type dmacHw_INTERRUPT_STATUS_e -* -* @return NULL : No channel causing DMA interrupt -* ! NULL : Handle to a channel causing DMA interrupt -* @note -* dmacHw_clearInterrupt() must be called with a valid handle after calling this function -*/ -/****************************************************************************/ -dmacHw_HANDLE_t dmacHw_getInterruptSource(void); - -/****************************************************************************/ -/** -* @brief Sets channel specific user data -* -* This function associates user data to a specific DMA channel -* -*/ -/****************************************************************************/ -void dmacHw_setChannelUserData(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *userData /* [ IN ] User data */ - ); - -/****************************************************************************/ -/** -* @brief Gets channel specific user data -* -* This function returns user data specific to a DMA channel -* -* @return user data -*/ -/****************************************************************************/ -void *dmacHw_getChannelUserData(dmacHw_HANDLE_t handle /* [ IN ] DMA Channel handle */ - ); - -/****************************************************************************/ -/** -* @brief Displays channel specific registers and other control parameters -* -* -* @return void -* -* @note -* None -*/ -/****************************************************************************/ -void dmacHw_printDebugInfo(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - void *pDescriptor, /* [ IN ] Descriptor buffer */ - int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */ - ); - -/****************************************************************************/ -/** -* @brief Provides DMA controller attributes -* -* -* @return DMA controller attributes -* -* @note -* None -*/ -/****************************************************************************/ -uint32_t dmacHw_getDmaControllerAttribute(dmacHw_HANDLE_t handle, /* [ IN ] DMA Channel handle */ - dmacHw_CONTROLLER_ATTRIB_e attr /* [ IN ] DMA Controller attribute of type dmacHw_CONTROLLER_ATTRIB_e */ - ); - -#endif /* _DMACHW_H */ diff --git a/arch/arm/mach-bcmring/include/csp/errno.h b/arch/arm/mach-bcmring/include/csp/errno.h deleted file mode 100644 index 51357dd5b6667926fe7c8c7f85e1f4283cd8d798..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/csp/errno.h +++ /dev/null @@ -1,32 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CSP_ERRNO_H -#define CSP_ERRNO_H - -/* ---- Include Files ---------------------------------------------------- */ - -#if defined(__KERNEL__) -#include -#elif defined(CSP_SIMULATION) -#include -#else -#include -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* CSP_ERRNO_H */ diff --git a/arch/arm/mach-bcmring/include/csp/intcHw.h b/arch/arm/mach-bcmring/include/csp/intcHw.h deleted file mode 100644 index 1c639c8ee08f3394c04e7feabad23c13118b10a4..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/csp/intcHw.h +++ /dev/null @@ -1,40 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - -/****************************************************************************/ -/** -* @file intcHw.h -* -* @brief generic interrupt controller API -* -* @note -* None -*/ -/****************************************************************************/ - -#ifndef _INTCHW_H -#define _INTCHW_H - -/* ---- Include Files ---------------------------------------------------- */ -#include - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ -static inline void intcHw_irq_disable(void *basep, uint32_t mask); -static inline void intcHw_irq_enable(void *basep, uint32_t mask); - -#endif /* _INTCHW_H */ - diff --git a/arch/arm/mach-bcmring/include/csp/module.h b/arch/arm/mach-bcmring/include/csp/module.h deleted file mode 100644 index c30d2a5975a6978d3f08f377b8102ec46cb3057b..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/csp/module.h +++ /dev/null @@ -1,32 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - -#ifndef CSP_MODULE_H -#define CSP_MODULE_H - -/* ---- Include Files ---------------------------------------------------- */ - -#ifdef __KERNEL__ - #include -#else - #define EXPORT_SYMBOL(symbol) -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - - -#endif /* CSP_MODULE_H */ diff --git a/arch/arm/mach-bcmring/include/csp/reg.h b/arch/arm/mach-bcmring/include/csp/reg.h deleted file mode 100644 index 56654d23c3d7cbba4bc7fb61607c64be6be4dc24..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/csp/reg.h +++ /dev/null @@ -1,114 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file reg.h -* -* @brief Generic register definitions used in CSP -*/ -/****************************************************************************/ - -#ifndef CSP_REG_H -#define CSP_REG_H - -/* ---- Include Files ---------------------------------------------------- */ - -#include - -/* ---- Public Constants and Types --------------------------------------- */ - -#define __REG32(x) (*((volatile uint32_t *)(x))) -#define __REG16(x) (*((volatile uint16_t *)(x))) -#define __REG8(x) (*((volatile uint8_t *) (x))) - -/* Macros used to define a sequence of reserved registers. The start / end */ -/* are byte offsets in the particular register definition, with the "end" */ -/* being the offset of the next un-reserved register. E.g. if offsets */ -/* 0x10 through to 0x1f are reserved, then this reserved area could be */ -/* specified as follows. */ -/* typedef struct */ -/* { */ -/* uint32_t reg1; offset 0x00 */ -/* uint32_t reg2; offset 0x04 */ -/* uint32_t reg3; offset 0x08 */ -/* uint32_t reg4; offset 0x0c */ -/* REG32_RSVD(0x10, 0x20); */ -/* uint32_t reg5; offset 0x20 */ -/* ... */ -/* } EXAMPLE_REG_t; */ -#define REG8_RSVD(start, end) uint8_t rsvd_##start[(end - start) / sizeof(uint8_t)] -#define REG16_RSVD(start, end) uint16_t rsvd_##start[(end - start) / sizeof(uint16_t)] -#define REG32_RSVD(start, end) uint32_t rsvd_##start[(end - start) / sizeof(uint32_t)] - -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -/* Note: When protecting multiple statements, the REG_LOCAL_IRQ_SAVE and */ -/* REG_LOCAL_IRQ_RESTORE must be enclosed in { } to allow the */ -/* flags variable to be declared locally. */ -/* e.g. */ -/* statement1; */ -/* { */ -/* REG_LOCAL_IRQ_SAVE; */ -/* */ -/* REG_LOCAL_IRQ_RESTORE; */ -/* } */ -/* statement2; */ -/* */ - -#if defined(__KERNEL__) && !defined(STANDALONE) -#include -#include - -#define REG_LOCAL_IRQ_SAVE HW_DECLARE_SPINLOCK(reg32) \ - unsigned long flags; HW_IRQ_SAVE(reg32, flags) - -#define REG_LOCAL_IRQ_RESTORE HW_IRQ_RESTORE(reg32, flags) - -#else - -#define REG_LOCAL_IRQ_SAVE -#define REG_LOCAL_IRQ_RESTORE - -#endif - -static inline void reg32_modify_and(volatile uint32_t *reg, uint32_t value) -{ - REG_LOCAL_IRQ_SAVE; - *reg &= value; - REG_LOCAL_IRQ_RESTORE; -} - -static inline void reg32_modify_or(volatile uint32_t *reg, uint32_t value) -{ - REG_LOCAL_IRQ_SAVE; - *reg |= value; - REG_LOCAL_IRQ_RESTORE; -} - -static inline void reg32_modify_mask(volatile uint32_t *reg, uint32_t mask, - uint32_t value) -{ - REG_LOCAL_IRQ_SAVE; - *reg = (*reg & mask) | value; - REG_LOCAL_IRQ_RESTORE; -} - -static inline void reg32_write(volatile uint32_t *reg, uint32_t value) -{ - *reg = value; -} - -#endif /* CSP_REG_H */ diff --git a/arch/arm/mach-bcmring/include/csp/secHw.h b/arch/arm/mach-bcmring/include/csp/secHw.h deleted file mode 100644 index b9d7e0732dfc2406a682c0f32bf3ad3907d1062c..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/csp/secHw.h +++ /dev/null @@ -1,65 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file secHw.h -* -* @brief Definitions for accessing low level security features -* -*/ -/****************************************************************************/ -#ifndef SECHW_H -#define SECHW_H - -typedef void (*secHw_FUNC_t) (void); - -typedef enum { - secHw_MODE_SECURE = 0x0, /* Switches processor into secure mode */ - secHw_MODE_NONSECURE = 0x1 /* Switches processor into non-secure mode */ -} secHw_MODE; - -/****************************************************************************/ -/** -* @brief Requesting to execute the function in secure mode -* -* This function requests the given function to run in secure mode -* -*/ -/****************************************************************************/ -void secHw_RunSecure(secHw_FUNC_t /* Function to run in secure mode */ - ); - -/****************************************************************************/ -/** -* @brief Sets the mode -* -* his function sets the processor mode (secure/non-secure) -* -*/ -/****************************************************************************/ -void secHw_SetMode(secHw_MODE /* Processor mode */ - ); - -/****************************************************************************/ -/** -* @brief Get the current mode -* -* This function retieves the processor mode (secure/non-secure) -* -*/ -/****************************************************************************/ -void secHw_GetMode(secHw_MODE *); - -#endif /* SECHW_H */ diff --git a/arch/arm/mach-bcmring/include/csp/stdint.h b/arch/arm/mach-bcmring/include/csp/stdint.h deleted file mode 100644 index 3a8718bbf7009a826329abc2f4530994d5e9784a..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/csp/stdint.h +++ /dev/null @@ -1,30 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CSP_STDINT_H -#define CSP_STDINT_H - -/* ---- Include Files ---------------------------------------------------- */ - -#ifdef __KERNEL__ -#include -#else -#include -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* CSP_STDINT_H */ diff --git a/arch/arm/mach-bcmring/include/csp/string.h b/arch/arm/mach-bcmring/include/csp/string.h deleted file mode 100644 index ad9e4005f14178a6fc027e86de7ba0bed151cef1..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/csp/string.h +++ /dev/null @@ -1,34 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - - -#ifndef CSP_STRING_H -#define CSP_STRING_H - -/* ---- Include Files ---------------------------------------------------- */ - -#ifdef __KERNEL__ - #include -#else - #include -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - - -#endif /* CSP_STRING_H */ - diff --git a/arch/arm/mach-bcmring/include/csp/tmrHw.h b/arch/arm/mach-bcmring/include/csp/tmrHw.h deleted file mode 100644 index 2cbb530db8ea98eed1b2222570537e7db1d8ed95..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/csp/tmrHw.h +++ /dev/null @@ -1,263 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file tmrHw.h -* -* @brief API definitions for low level Timer driver -* -*/ -/****************************************************************************/ -#ifndef _TMRHW_H -#define _TMRHW_H - -#include - -typedef uint32_t tmrHw_ID_t; /* Timer ID */ -typedef uint32_t tmrHw_COUNT_t; /* Timer count */ -typedef uint32_t tmrHw_INTERVAL_t; /* Timer interval */ -typedef uint32_t tmrHw_RATE_t; /* Timer event (count/interrupt) rate */ - -typedef enum { - tmrHw_INTERRUPT_STATUS_SET, /* Interrupted */ - tmrHw_INTERRUPT_STATUS_UNSET /* No Interrupt */ -} tmrHw_INTERRUPT_STATUS_e; - -typedef enum { - tmrHw_CAPABILITY_CLOCK, /* Clock speed in HHz */ - tmrHw_CAPABILITY_RESOLUTION /* Timer resolution in bits */ -} tmrHw_CAPABILITY_e; - -/****************************************************************************/ -/** -* @brief Get timer capability -* -* This function returns various capabilities/attributes of a timer -* -* @return Numeric capability -* -*/ -/****************************************************************************/ -uint32_t tmrHw_getTimerCapability(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_CAPABILITY_e capability /* [ IN ] Timer capability */ -); - -/****************************************************************************/ -/** -* @brief Configures a periodic timer in terms of timer interrupt rate -* -* This function initializes a periodic timer to generate specific number of -* timer interrupt per second -* -* @return On success: Effective timer frequency -* On failure: 0 -* -*/ -/****************************************************************************/ -tmrHw_RATE_t tmrHw_setPeriodicTimerRate(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_RATE_t rate /* [ IN ] Number of timer interrupt per second */ -); - -/****************************************************************************/ -/** -* @brief Configures a periodic timer to generate timer interrupt after -* certain time interval -* -* This function initializes a periodic timer to generate timer interrupt -* after every time interval in millisecond -* -* @return On success: Effective interval set in mili-second -* On failure: 0 -* -*/ -/****************************************************************************/ -tmrHw_INTERVAL_t tmrHw_setPeriodicTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_INTERVAL_t msec /* [ IN ] Interval in mili-second */ -); - -/****************************************************************************/ -/** -* @brief Configures a periodic timer to generate timer interrupt just once -* after certain time interval -* -* This function initializes a periodic timer to generate a single ticks after -* certain time interval in millisecond -* -* @return On success: Effective interval set in mili-second -* On failure: 0 -* -*/ -/****************************************************************************/ -tmrHw_INTERVAL_t tmrHw_setOneshotTimerInterval(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - tmrHw_INTERVAL_t msec /* [ IN ] Interval in mili-second */ -); - -/****************************************************************************/ -/** -* @brief Configures a timer to run as a free running timer -* -* This function initializes a timer to run as a free running timer -* -* @return Timer resolution (count / sec) -* -*/ -/****************************************************************************/ -tmrHw_RATE_t tmrHw_setFreeRunningTimer(tmrHw_ID_t timerId, /* [ IN ] Timer Id */ - uint32_t divider /* [ IN ] Dividing the clock frequency */ -) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Starts a timer -* -* This function starts a preconfigured timer -* -* @return -1 - On Failure -* 0 - On Success -*/ -/****************************************************************************/ -int tmrHw_startTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Stops a timer -* -* This function stops a running timer -* -* @return -1 - On Failure -* 0 - On Success -*/ -/****************************************************************************/ -int tmrHw_stopTimer(tmrHw_ID_t timerId /* [ IN ] Timer id */ -); - -/****************************************************************************/ -/** -* @brief Gets current timer count -* -* This function returns the current timer value -* -* @return Current downcounting timer value -* -*/ -/****************************************************************************/ -tmrHw_COUNT_t tmrHw_GetCurrentCount(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Gets timer count rate -* -* This function returns the number of counts per second -* -* @return Count rate -* -*/ -/****************************************************************************/ -tmrHw_RATE_t tmrHw_getCountRate(tmrHw_ID_t timerId /* [ IN ] Timer id */ -) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Enables timer interrupt -* -* This function enables the timer interrupt -* -* @return N/A -* -*/ -/****************************************************************************/ -void tmrHw_enableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */ -); - -/****************************************************************************/ -/** -* @brief Disables timer interrupt -* -* This function disable the timer interrupt -* -* @return N/A -*/ -/****************************************************************************/ -void tmrHw_disableInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */ -); - -/****************************************************************************/ -/** -* @brief Clears the interrupt -* -* This function clears the timer interrupt -* -* @return N/A -* -* @note -* Must be called under the context of ISR -*/ -/****************************************************************************/ -void tmrHw_clearInterrupt(tmrHw_ID_t timerId /* [ IN ] Timer id */ -); - -/****************************************************************************/ -/** -* @brief Gets the interrupt status -* -* This function returns timer interrupt status -* -* @return Interrupt status -*/ -/****************************************************************************/ -tmrHw_INTERRUPT_STATUS_e tmrHw_getInterruptStatus(tmrHw_ID_t timerId /* [ IN ] Timer id */ -); - -/****************************************************************************/ -/** -* @brief Indentifies a timer causing interrupt -* -* This functions returns a timer causing interrupt -* -* @return 0xFFFFFFFF : No timer causing an interrupt -* ! 0xFFFFFFFF : timer causing an interrupt -* @note -* tmrHw_clearIntrrupt() must be called with a valid timer id after calling this function -*/ -/****************************************************************************/ -tmrHw_ID_t tmrHw_getInterruptSource(void); - -/****************************************************************************/ -/** -* @brief Displays specific timer registers -* -* -* @return void -* -*/ -/****************************************************************************/ -void tmrHw_printDebugInfo(tmrHw_ID_t timerId, /* [ IN ] Timer id */ - int (*fpPrint) (const char *, ...) /* [ IN ] Print callback function */ -); - -/****************************************************************************/ -/** -* @brief Use a timer to perform a busy wait delay for a number of usecs. -* -* @return N/A -*/ -/****************************************************************************/ -void tmrHw_udelay(tmrHw_ID_t timerId, /* [ IN ] Timer id */ - unsigned long usecs /* [ IN ] usec to delay */ -) __attribute__ ((section(".aramtext"))); - -#endif /* _TMRHW_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap.h b/arch/arm/mach-bcmring/include/mach/csp/cap.h deleted file mode 100644 index 30fa2d540630b7a8df43cff4a72bcc2b0a3d1667..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/cap.h +++ /dev/null @@ -1,63 +0,0 @@ -/***************************************************************************** -* Copyright 2009 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CAP_H -#define CAP_H - -/* ---- Include Files ---------------------------------------------------- */ -/* ---- Public Constants and Types --------------------------------------- */ -typedef enum { - CAP_NOT_PRESENT = 0, - CAP_PRESENT -} CAP_RC_T; - -typedef enum { - CAP_VPM, - CAP_ETH_PHY, - CAP_ETH_GMII, - CAP_ETH_SGMII, - CAP_USB, - CAP_TSC, - CAP_EHSS, - CAP_SDIO, - CAP_UARTB, - CAP_KEYPAD, - CAP_CLCD, - CAP_GE, - CAP_LEDM, - CAP_BBL, - CAP_VDEC, - CAP_PIF, - CAP_APM, - CAP_SPU, - CAP_PKA, - CAP_RNG, -} CAP_CAPABILITY_T; - -typedef enum { - CAP_LCD_WVGA = 0, - CAP_LCD_VGA = 0x1, - CAP_LCD_WQVGA = 0x2, - CAP_LCD_QVGA = 0x3 -} CAP_LCD_RES_T; - -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index); -static inline uint32_t cap_getMaxArmSpeedHz(void); -static inline uint32_t cap_getMaxVpmSpeedHz(void); -static inline CAP_LCD_RES_T cap_getMaxLcdRes(void); - -#endif diff --git a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h b/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h deleted file mode 100644 index 933ce68ed90b4980ae3720c363c9e1d8590b6037..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/cap_inline.h +++ /dev/null @@ -1,409 +0,0 @@ -/***************************************************************************** -* Copyright 2009 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CAP_INLINE_H -#define CAP_INLINE_H - -/* ---- Include Files ---------------------------------------------------- */ -#include -#include - -/* ---- Public Constants and Types --------------------------------------- */ -#define CAP_CONFIG0_VPM_DIS 0x00000001 -#define CAP_CONFIG0_ETH_PHY0_DIS 0x00000002 -#define CAP_CONFIG0_ETH_PHY1_DIS 0x00000004 -#define CAP_CONFIG0_ETH_GMII0_DIS 0x00000008 -#define CAP_CONFIG0_ETH_GMII1_DIS 0x00000010 -#define CAP_CONFIG0_ETH_SGMII0_DIS 0x00000020 -#define CAP_CONFIG0_ETH_SGMII1_DIS 0x00000040 -#define CAP_CONFIG0_USB0_DIS 0x00000080 -#define CAP_CONFIG0_USB1_DIS 0x00000100 -#define CAP_CONFIG0_TSC_DIS 0x00000200 -#define CAP_CONFIG0_EHSS0_DIS 0x00000400 -#define CAP_CONFIG0_EHSS1_DIS 0x00000800 -#define CAP_CONFIG0_SDIO0_DIS 0x00001000 -#define CAP_CONFIG0_SDIO1_DIS 0x00002000 -#define CAP_CONFIG0_UARTB_DIS 0x00004000 -#define CAP_CONFIG0_KEYPAD_DIS 0x00008000 -#define CAP_CONFIG0_CLCD_DIS 0x00010000 -#define CAP_CONFIG0_GE_DIS 0x00020000 -#define CAP_CONFIG0_LEDM_DIS 0x00040000 -#define CAP_CONFIG0_BBL_DIS 0x00080000 -#define CAP_CONFIG0_VDEC_DIS 0x00100000 -#define CAP_CONFIG0_PIF_DIS 0x00200000 -#define CAP_CONFIG0_RESERVED1_DIS 0x00400000 -#define CAP_CONFIG0_RESERVED2_DIS 0x00800000 - -#define CAP_CONFIG1_APMA_DIS 0x00000001 -#define CAP_CONFIG1_APMB_DIS 0x00000002 -#define CAP_CONFIG1_APMC_DIS 0x00000004 -#define CAP_CONFIG1_CLCD_RES_MASK 0x00000600 -#define CAP_CONFIG1_CLCD_RES_SHIFT 9 -#define CAP_CONFIG1_CLCD_RES_WVGA (CAP_LCD_WVGA << CAP_CONFIG1_CLCD_RES_SHIFT) -#define CAP_CONFIG1_CLCD_RES_VGA (CAP_LCD_VGA << CAP_CONFIG1_CLCD_RES_SHIFT) -#define CAP_CONFIG1_CLCD_RES_WQVGA (CAP_LCD_WQVGA << CAP_CONFIG1_CLCD_RES_SHIFT) -#define CAP_CONFIG1_CLCD_RES_QVGA (CAP_LCD_QVGA << CAP_CONFIG1_CLCD_RES_SHIFT) - -#define CAP_CONFIG2_SPU_DIS 0x00000010 -#define CAP_CONFIG2_PKA_DIS 0x00000020 -#define CAP_CONFIG2_RNG_DIS 0x00000080 - -#if (CFG_GLOBAL_CHIP == BCM11107) -#define capConfig0 0 -#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA -#define capConfig2 0 -#define CAP_APM_MAX_NUM_CHANS 3 -#elif (CFG_GLOBAL_CHIP == FPGA11107) -#define capConfig0 0 -#define capConfig1 CAP_CONFIG1_CLCD_RES_WVGA -#define capConfig2 0 -#define CAP_APM_MAX_NUM_CHANS 3 -#elif (CFG_GLOBAL_CHIP == BCM11109) -#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS) -#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA) -#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS) -#define CAP_APM_MAX_NUM_CHANS 2 -#elif (CFG_GLOBAL_CHIP == BCM11170) -#define capConfig0 (CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_USB0_DIS | CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_CLCD_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS) -#define capConfig1 (CAP_CONFIG1_APMC_DIS | CAP_CONFIG1_CLCD_RES_WQVGA) -#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS) -#define CAP_APM_MAX_NUM_CHANS 2 -#elif (CFG_GLOBAL_CHIP == BCM11110) -#define capConfig0 (CAP_CONFIG0_USB1_DIS | CAP_CONFIG0_TSC_DIS | CAP_CONFIG0_EHSS1_DIS | CAP_CONFIG0_SDIO0_DIS | CAP_CONFIG0_SDIO1_DIS | CAP_CONFIG0_UARTB_DIS | CAP_CONFIG0_GE_DIS | CAP_CONFIG0_BBL_DIS | CAP_CONFIG0_VDEC_DIS) -#define capConfig1 CAP_CONFIG1_APMC_DIS -#define capConfig2 (CAP_CONFIG2_SPU_DIS | CAP_CONFIG2_PKA_DIS) -#define CAP_APM_MAX_NUM_CHANS 2 -#elif (CFG_GLOBAL_CHIP == BCM11211) -#define capConfig0 (CAP_CONFIG0_ETH_PHY0_DIS | CAP_CONFIG0_ETH_GMII0_DIS | CAP_CONFIG0_ETH_GMII1_DIS | CAP_CONFIG0_ETH_SGMII0_DIS | CAP_CONFIG0_ETH_SGMII1_DIS | CAP_CONFIG0_CLCD_DIS) -#define capConfig1 CAP_CONFIG1_APMC_DIS -#define capConfig2 0 -#define CAP_APM_MAX_NUM_CHANS 2 -#else -#error CFG_GLOBAL_CHIP type capabilities not defined -#endif - -#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107)) -#define CAP_HW_CFG_ARM_CLK_HZ 500000000 -#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110)) -#define CAP_HW_CFG_ARM_CLK_HZ 300000000 -#elif (CFG_GLOBAL_CHIP == BCM11211) -#define CAP_HW_CFG_ARM_CLK_HZ 666666666 -#else -#error CFG_GLOBAL_CHIP type capabilities not defined -#endif - -#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107)) -#define CAP_HW_CFG_VPM_CLK_HZ 333333333 -#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110)) -#define CAP_HW_CFG_VPM_CLK_HZ 200000000 -#else -#error CFG_GLOBAL_CHIP type capabilities not defined -#endif - -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -/**************************************************************************** -* cap_isPresent - -* -* PURPOSE: -* Determines if the chip has a certain capability present -* -* PARAMETERS: -* capability - type of capability to determine if present -* -* RETURNS: -* CAP_PRESENT or CAP_NOT_PRESENT -****************************************************************************/ -static inline CAP_RC_T cap_isPresent(CAP_CAPABILITY_T capability, int index) -{ - CAP_RC_T returnVal = CAP_NOT_PRESENT; - - switch (capability) { - case CAP_VPM: - { - if (!(capConfig0 & CAP_CONFIG0_VPM_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_ETH_PHY: - { - if ((index == 0) - && (!(capConfig0 & CAP_CONFIG0_ETH_PHY0_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 1) - && (!(capConfig0 & CAP_CONFIG0_ETH_PHY1_DIS))) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_ETH_GMII: - { - if ((index == 0) - && (!(capConfig0 & CAP_CONFIG0_ETH_GMII0_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 1) - && (!(capConfig0 & CAP_CONFIG0_ETH_GMII1_DIS))) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_ETH_SGMII: - { - if ((index == 0) - && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII0_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 1) - && (!(capConfig0 & CAP_CONFIG0_ETH_SGMII1_DIS))) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_USB: - { - if ((index == 0) - && (!(capConfig0 & CAP_CONFIG0_USB0_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 1) - && (!(capConfig0 & CAP_CONFIG0_USB1_DIS))) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_TSC: - { - if (!(capConfig0 & CAP_CONFIG0_TSC_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_EHSS: - { - if ((index == 0) - && (!(capConfig0 & CAP_CONFIG0_EHSS0_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 1) - && (!(capConfig0 & CAP_CONFIG0_EHSS1_DIS))) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_SDIO: - { - if ((index == 0) - && (!(capConfig0 & CAP_CONFIG0_SDIO0_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 1) - && (!(capConfig0 & CAP_CONFIG0_SDIO1_DIS))) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_UARTB: - { - if (!(capConfig0 & CAP_CONFIG0_UARTB_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_KEYPAD: - { - if (!(capConfig0 & CAP_CONFIG0_KEYPAD_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_CLCD: - { - if (!(capConfig0 & CAP_CONFIG0_CLCD_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_GE: - { - if (!(capConfig0 & CAP_CONFIG0_GE_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_LEDM: - { - if (!(capConfig0 & CAP_CONFIG0_LEDM_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_BBL: - { - if (!(capConfig0 & CAP_CONFIG0_BBL_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_VDEC: - { - if (!(capConfig0 & CAP_CONFIG0_VDEC_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_PIF: - { - if (!(capConfig0 & CAP_CONFIG0_PIF_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_APM: - { - if ((index == 0) - && (!(capConfig1 & CAP_CONFIG1_APMA_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 1) - && (!(capConfig1 & CAP_CONFIG1_APMB_DIS))) { - returnVal = CAP_PRESENT; - } - if ((index == 2) - && (!(capConfig1 & CAP_CONFIG1_APMC_DIS))) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_SPU: - { - if (!(capConfig2 & CAP_CONFIG2_SPU_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_PKA: - { - if (!(capConfig2 & CAP_CONFIG2_PKA_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - case CAP_RNG: - { - if (!(capConfig2 & CAP_CONFIG2_RNG_DIS)) { - returnVal = CAP_PRESENT; - } - } - break; - - default: - { - } - break; - } - return returnVal; -} - -/**************************************************************************** -* cap_getMaxArmSpeedHz - -* -* PURPOSE: -* Determines the maximum speed of the ARM CPU -* -* PARAMETERS: -* none -* -* RETURNS: -* clock speed in Hz that the ARM processor is able to run at -****************************************************************************/ -static inline uint32_t cap_getMaxArmSpeedHz(void) -{ -#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == FPGA11107)) - return 500000000; -#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110)) - return 300000000; -#elif (CFG_GLOBAL_CHIP == BCM11211) - return 666666666; -#else -#error CFG_GLOBAL_CHIP type capabilities not defined -#endif -} - -/**************************************************************************** -* cap_getMaxVpmSpeedHz - -* -* PURPOSE: -* Determines the maximum speed of the VPM -* -* PARAMETERS: -* none -* -* RETURNS: -* clock speed in Hz that the VPM is able to run at -****************************************************************************/ -static inline uint32_t cap_getMaxVpmSpeedHz(void) -{ -#if ((CFG_GLOBAL_CHIP == BCM11107) || (CFG_GLOBAL_CHIP == BCM11211) || (CFG_GLOBAL_CHIP == FPGA11107)) - return 333333333; -#elif ((CFG_GLOBAL_CHIP == BCM11109) || (CFG_GLOBAL_CHIP == BCM11170) || (CFG_GLOBAL_CHIP == BCM11110)) - return 200000000; -#else -#error CFG_GLOBAL_CHIP type capabilities not defined -#endif -} - -/**************************************************************************** -* cap_getMaxLcdRes - -* -* PURPOSE: -* Determines the maximum LCD resolution capabilities -* -* PARAMETERS: -* none -* -* RETURNS: -* CAP_LCD_WVGA, CAP_LCD_VGA, CAP_LCD_WQVGA or CAP_LCD_QVGA -* -****************************************************************************/ -static inline CAP_LCD_RES_T cap_getMaxLcdRes(void) -{ - return (CAP_LCD_RES_T) - ((capConfig1 & CAP_CONFIG1_CLCD_RES_MASK) >> - CAP_CONFIG1_CLCD_RES_SHIFT); -} - -#endif diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h deleted file mode 100644 index 161973385faf51ac2c98f80d46ab11dd9eed9d7d..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_def.h +++ /dev/null @@ -1,1123 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CHIPC_DEF_H -#define CHIPC_DEF_H - -/* ---- Include Files ----------------------------------------------------- */ - -#include -#include -#include -#include - -/* ---- Public Constants and Types ---------------------------------------- */ - -/* Set 1 to configure DDR/VPM phase alignment by HW */ -#define chipcHw_DDR_HW_PHASE_ALIGN 0 -#define chipcHw_VPM_HW_PHASE_ALIGN 0 - -typedef uint32_t chipcHw_freq; - -/* Configurable miscellaneous clocks */ -typedef enum { - chipcHw_CLOCK_DDR, /* DDR PHY Clock */ - chipcHw_CLOCK_ARM, /* ARM Clock */ - chipcHw_CLOCK_ESW, /* Ethernet Switch Clock */ - chipcHw_CLOCK_VPM, /* VPM Clock */ - chipcHw_CLOCK_ESW125, /* Ethernet MII Clock */ - chipcHw_CLOCK_UART, /* UART Clock */ - chipcHw_CLOCK_SDIO0, /* SDIO 0 Clock */ - chipcHw_CLOCK_SDIO1, /* SDIO 1 Clock */ - chipcHw_CLOCK_SPI, /* SPI Clock */ - chipcHw_CLOCK_ETM, /* ARM ETM Clock */ - - chipcHw_CLOCK_BUS, /* BUS Clock */ - chipcHw_CLOCK_OTP, /* OTP Clock */ - chipcHw_CLOCK_I2C, /* I2C Host Clock */ - chipcHw_CLOCK_I2S0, /* I2S 0 Host Clock */ - chipcHw_CLOCK_RTBUS, /* DDR PHY Configuration Clock */ - chipcHw_CLOCK_APM100, /* APM100 Clock */ - chipcHw_CLOCK_TSC, /* Touch screen Clock */ - chipcHw_CLOCK_LED, /* LED Clock */ - - chipcHw_CLOCK_USB, /* USB Clock */ - chipcHw_CLOCK_LCD, /* LCD CLock */ - chipcHw_CLOCK_APM, /* APM Clock */ - - chipcHw_CLOCK_I2S1, /* I2S 1 Host Clock */ -} chipcHw_CLOCK_e; - -/* System booting strap options */ -typedef enum { - chipcHw_BOOT_DEVICE_UART = chipcHw_STRAPS_BOOT_DEVICE_UART, - chipcHw_BOOT_DEVICE_SERIAL_FLASH = - chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH, - chipcHw_BOOT_DEVICE_NOR_FLASH_16 = - chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16, - chipcHw_BOOT_DEVICE_NAND_FLASH_8 = - chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8, - chipcHw_BOOT_DEVICE_NAND_FLASH_16 = - chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16 -} chipcHw_BOOT_DEVICE_e; - -/* System booting modes */ -typedef enum { - chipcHw_BOOT_MODE_NORMAL = chipcHw_STRAPS_BOOT_MODE_NORMAL, - chipcHw_BOOT_MODE_DBG_SW = chipcHw_STRAPS_BOOT_MODE_DBG_SW, - chipcHw_BOOT_MODE_DBG_BOOT = chipcHw_STRAPS_BOOT_MODE_DBG_BOOT, - chipcHw_BOOT_MODE_NORMAL_QUIET = chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET -} chipcHw_BOOT_MODE_e; - -/* NAND Flash page size strap options */ -typedef enum { - chipcHw_NAND_PAGESIZE_512 = chipcHw_STRAPS_NAND_PAGESIZE_512, - chipcHw_NAND_PAGESIZE_2048 = chipcHw_STRAPS_NAND_PAGESIZE_2048, - chipcHw_NAND_PAGESIZE_4096 = chipcHw_STRAPS_NAND_PAGESIZE_4096, - chipcHw_NAND_PAGESIZE_EXT = chipcHw_STRAPS_NAND_PAGESIZE_EXT -} chipcHw_NAND_PAGESIZE_e; - -/* GPIO Pin function */ -typedef enum { - chipcHw_GPIO_FUNCTION_KEYPAD = chipcHw_REG_GPIO_MUX_KEYPAD, - chipcHw_GPIO_FUNCTION_I2CH = chipcHw_REG_GPIO_MUX_I2CH, - chipcHw_GPIO_FUNCTION_SPI = chipcHw_REG_GPIO_MUX_SPI, - chipcHw_GPIO_FUNCTION_UART = chipcHw_REG_GPIO_MUX_UART, - chipcHw_GPIO_FUNCTION_LEDMTXP = chipcHw_REG_GPIO_MUX_LEDMTXP, - chipcHw_GPIO_FUNCTION_LEDMTXS = chipcHw_REG_GPIO_MUX_LEDMTXS, - chipcHw_GPIO_FUNCTION_SDIO0 = chipcHw_REG_GPIO_MUX_SDIO0, - chipcHw_GPIO_FUNCTION_SDIO1 = chipcHw_REG_GPIO_MUX_SDIO1, - chipcHw_GPIO_FUNCTION_PCM = chipcHw_REG_GPIO_MUX_PCM, - chipcHw_GPIO_FUNCTION_I2S = chipcHw_REG_GPIO_MUX_I2S, - chipcHw_GPIO_FUNCTION_ETM = chipcHw_REG_GPIO_MUX_ETM, - chipcHw_GPIO_FUNCTION_DEBUG = chipcHw_REG_GPIO_MUX_DEBUG, - chipcHw_GPIO_FUNCTION_MISC = chipcHw_REG_GPIO_MUX_MISC, - chipcHw_GPIO_FUNCTION_GPIO = chipcHw_REG_GPIO_MUX_GPIO -} chipcHw_GPIO_FUNCTION_e; - -/* PIN Output slew rate */ -typedef enum { - chipcHw_PIN_SLEW_RATE_HIGH = chipcHw_REG_SLEW_RATE_HIGH, - chipcHw_PIN_SLEW_RATE_NORMAL = chipcHw_REG_SLEW_RATE_NORMAL -} chipcHw_PIN_SLEW_RATE_e; - -/* PIN Current drive strength */ -typedef enum { - chipcHw_PIN_CURRENT_STRENGTH_2mA = chipcHw_REG_CURRENT_STRENGTH_2mA, - chipcHw_PIN_CURRENT_STRENGTH_4mA = chipcHw_REG_CURRENT_STRENGTH_4mA, - chipcHw_PIN_CURRENT_STRENGTH_6mA = chipcHw_REG_CURRENT_STRENGTH_6mA, - chipcHw_PIN_CURRENT_STRENGTH_8mA = chipcHw_REG_CURRENT_STRENGTH_8mA, - chipcHw_PIN_CURRENT_STRENGTH_10mA = chipcHw_REG_CURRENT_STRENGTH_10mA, - chipcHw_PIN_CURRENT_STRENGTH_12mA = chipcHw_REG_CURRENT_STRENGTH_12mA -} chipcHw_PIN_CURRENT_STRENGTH_e; - -/* PIN Pull up register settings */ -typedef enum { - chipcHw_PIN_PULL_NONE = chipcHw_REG_PULL_NONE, - chipcHw_PIN_PULL_UP = chipcHw_REG_PULL_UP, - chipcHw_PIN_PULL_DOWN = chipcHw_REG_PULL_DOWN -} chipcHw_PIN_PULL_e; - -/* PIN input type settings */ -typedef enum { - chipcHw_PIN_INPUTTYPE_CMOS = chipcHw_REG_INPUTTYPE_CMOS, - chipcHw_PIN_INPUTTYPE_ST = chipcHw_REG_INPUTTYPE_ST -} chipcHw_PIN_INPUTTYPE_e; - -/* Allow/Disalow the support of spread spectrum */ -typedef enum { - chipcHw_SPREAD_SPECTRUM_DISALLOW, /* Spread spectrum support is not allowed */ - chipcHw_SPREAD_SPECTRUM_ALLOW /* Spread spectrum support is allowed */ -} chipcHw_SPREAD_SPECTRUM_e; - -typedef struct { - chipcHw_SPREAD_SPECTRUM_e ssSupport; /* Allow/Disalow to support spread spectrum. - If supported, call chipcHw_enableSpreadSpectrum () - to activate the spread spectrum with desired spread. */ - uint32_t pllVcoFreqHz; /* PLL VCO frequency in Hz */ - uint32_t pll2VcoFreqHz; /* PLL2 VCO frequency in Hz */ - uint32_t busClockFreqHz; /* Bus clock frequency in Hz */ - uint32_t armBusRatio; /* ARM clock : Bus clock */ - uint32_t vpmBusRatio; /* VPM clock : Bus clock */ - uint32_t ddrBusRatio; /* DDR clock : Bus clock */ -} chipcHw_INIT_PARAM_t; - -/* CHIP revision number */ -typedef enum { - chipcHw_REV_NUMBER_A0 = chipcHw_REG_REV_A0, - chipcHw_REV_NUMBER_B0 = chipcHw_REG_REV_B0 -} chipcHw_REV_NUMBER_e; - -typedef enum { - chipcHw_VPM_HW_PHASE_INTR_DISABLE = chipcHw_REG_VPM_INTR_DISABLE, - chipcHw_VPM_HW_PHASE_INTR_FAST = chipcHw_REG_VPM_INTR_FAST, - chipcHw_VPM_HW_PHASE_INTR_MEDIUM = chipcHw_REG_VPM_INTR_MEDIUM, - chipcHw_VPM_HW_PHASE_INTR_SLOW = chipcHw_REG_VPM_INTR_SLOW -} chipcHw_VPM_HW_PHASE_INTR_e; - -typedef enum { - chipcHw_DDR_HW_PHASE_MARGIN_STRICT, /* Strict margin for DDR phase align condition */ - chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM, /* Medium margin for DDR phase align condition */ - chipcHw_DDR_HW_PHASE_MARGIN_WIDE /* Wider margin for DDR phase align condition */ -} chipcHw_DDR_HW_PHASE_MARGIN_e; - -typedef enum { - chipcHw_VPM_HW_PHASE_MARGIN_STRICT, /* Strict margin for VPM phase align condition */ - chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM, /* Medium margin for VPM phase align condition */ - chipcHw_VPM_HW_PHASE_MARGIN_WIDE /* Wider margin for VPM phase align condition */ -} chipcHw_VPM_HW_PHASE_MARGIN_e; - -#define chipcHw_XTAL_FREQ_Hz 25000000 /* Reference clock frequency in Hz */ - -/* Programmable pin defines */ -#define chipcHw_PIN_GPIO(n) ((((n) >= 0) && ((n) < (chipcHw_GPIO_COUNT))) ? (n) : 0xFFFFFFFF) - /* GPIO pin 0 - 60 */ -#define chipcHw_PIN_UARTTXD (chipcHw_GPIO_COUNT + 0) /* UART Transmit */ -#define chipcHw_PIN_NVI_A (chipcHw_GPIO_COUNT + 1) /* NVI Interface */ -#define chipcHw_PIN_NVI_D (chipcHw_GPIO_COUNT + 2) /* NVI Interface */ -#define chipcHw_PIN_NVI_OEB (chipcHw_GPIO_COUNT + 3) /* NVI Interface */ -#define chipcHw_PIN_NVI_WEB (chipcHw_GPIO_COUNT + 4) /* NVI Interface */ -#define chipcHw_PIN_NVI_CS (chipcHw_GPIO_COUNT + 5) /* NVI Interface */ -#define chipcHw_PIN_NVI_NAND_CSB (chipcHw_GPIO_COUNT + 6) /* NVI Interface */ -#define chipcHw_PIN_NVI_FLASHWP (chipcHw_GPIO_COUNT + 7) /* NVI Interface */ -#define chipcHw_PIN_NVI_NAND_RDYB (chipcHw_GPIO_COUNT + 8) /* NVI Interface */ -#define chipcHw_PIN_CL_DATA_0_17 (chipcHw_GPIO_COUNT + 9) /* LCD Data 0 - 17 */ -#define chipcHw_PIN_CL_DATA_18_20 (chipcHw_GPIO_COUNT + 10) /* LCD Data 18 - 20 */ -#define chipcHw_PIN_CL_DATA_21_23 (chipcHw_GPIO_COUNT + 11) /* LCD Data 21 - 23 */ -#define chipcHw_PIN_CL_POWER (chipcHw_GPIO_COUNT + 12) /* LCD Power */ -#define chipcHw_PIN_CL_ACK (chipcHw_GPIO_COUNT + 13) /* LCD Ack */ -#define chipcHw_PIN_CL_FP (chipcHw_GPIO_COUNT + 14) /* LCD FP */ -#define chipcHw_PIN_CL_LP (chipcHw_GPIO_COUNT + 15) /* LCD LP */ -#define chipcHw_PIN_UARTRXD (chipcHw_GPIO_COUNT + 16) /* UART Receive */ - -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -/****************************************************************************/ -/** -* @brief Initializes the clock module -* -*/ -/****************************************************************************/ -void chipcHw_Init(chipcHw_INIT_PARAM_t *initParam /* [ IN ] Misc chip initialization parameter */ - ) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Enables the PLL1 -* -* This function enables the PLL1 -* -*/ -/****************************************************************************/ -void chipcHw_pll1Enable(uint32_t vcoFreqHz, /* [ IN ] VCO frequency in Hz */ - chipcHw_SPREAD_SPECTRUM_e ssSupport /* [ IN ] SS status */ - ) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Enables the PLL2 -* -* This function enables the PLL2 -* -*/ -/****************************************************************************/ -void chipcHw_pll2Enable(uint32_t vcoFreqHz /* [ IN ] VCO frequency in Hz */ - ) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Disable the PLL1 -* -*/ -/****************************************************************************/ -static inline void chipcHw_pll1Disable(void); - -/****************************************************************************/ -/** -* @brief Disable the PLL2 -* -*/ -/****************************************************************************/ -static inline void chipcHw_pll2Disable(void); - -/****************************************************************************/ -/** -* @brief Set clock fequency for miscellaneous configurable clocks -* -* This function sets clock frequency -* -* @return Configured clock frequency in KHz -* -*/ -/****************************************************************************/ -chipcHw_freq chipcHw_getClockFrequency(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ - ) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Set clock fequency for miscellaneous configurable clocks -* -* This function sets clock frequency -* -* @return Configured clock frequency in Hz -* -*/ -/****************************************************************************/ -chipcHw_freq chipcHw_setClockFrequency(chipcHw_CLOCK_e clock, /* [ IN ] Configurable clock */ - uint32_t freq /* [ IN ] Clock frequency in Hz */ - ) __attribute__ ((section(".aramtext"))); - -/****************************************************************************/ -/** -* @brief Set VPM clock in sync with BUS clock -* -* This function does the phase adjustment between VPM and BUS clock -* -* @return >= 0 : On success ( # of adjustment required ) -* -1 : On failure -*/ -/****************************************************************************/ -int chipcHw_vpmPhaseAlign(void); - -/****************************************************************************/ -/** -* @brief Enables core a clock of a certain device -* -* This function enables a core clock -* -* @return void -* -* @note Doesnot affect the bus interface clock -*/ -/****************************************************************************/ -static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ - ); - -/****************************************************************************/ -/** -* @brief Disabled a core clock of a certain device -* -* This function disables a core clock -* -* @return void -* -* @note Doesnot affect the bus interface clock -*/ -/****************************************************************************/ -static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ - ); - -/****************************************************************************/ -/** -* @brief Enables bypass clock of a certain device -* -* This function enables bypass clock -* -* @note Doesnot affect the bus interface clock -*/ -/****************************************************************************/ -static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ - ); - -/****************************************************************************/ -/** -* @brief Disabled bypass clock of a certain device -* -* This function disables bypass clock -* -* @note Doesnot affect the bus interface clock -*/ -/****************************************************************************/ -static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock /* [ IN ] Configurable clock */ - ); - -/****************************************************************************/ -/** -* @brief Get Numeric Chip ID -* -* This function returns Chip ID that includes the revison number -* -* @return Complete numeric Chip ID -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getChipId(void); - -/****************************************************************************/ -/** -* @brief Get Chip Product ID -* -* This function returns Chip Product ID -* -* @return Chip Product ID -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getChipProductId(void); - -/****************************************************************************/ -/** -* @brief Get revision number -* -* This function returns revision number of the chip -* -* @return Revision number -*/ -/****************************************************************************/ -static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void); - -/****************************************************************************/ -/** -* @brief Enables bus interface clock -* -* Enables bus interface clock of various device -* -* @return void -* -* @note use chipcHw_REG_BUS_CLOCK_XXXX -*/ -/****************************************************************************/ -static inline void chipcHw_busInterfaceClockEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_BUS_CLOCK_XXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Disables bus interface clock -* -* Disables bus interface clock of various device -* -* @return void -* -* @note use chipcHw_REG_BUS_CLOCK_XXXX -*/ -/****************************************************************************/ -static inline void chipcHw_busInterfaceClockDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_BUS_CLOCK_XXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Enables various audio channels -* -* Enables audio channel -* -* @return void -* -* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_audioChannelEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_AUDIO_CHANNEL_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Disables various audio channels -* -* Disables audio channel -* -* @return void -* -* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_audioChannelDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_AUDIO_CHANNEL_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Soft resets devices -* -* Soft resets various devices -* -* @return void -* -* @note use chipcHw_REG_SOFT_RESET_XXXXXX defines -*/ -/****************************************************************************/ -static inline void chipcHw_softReset(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */ - ); - -static inline void chipcHw_softResetDisable(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */ - ); - -static inline void chipcHw_softResetEnable(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_SOFT_RESET_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Configures misc CHIP functionality -* -* Configures CHIP functionality -* -* @return void -* -* @note use chipcHw_REG_MISC_CTRL_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_miscControl(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */ - ); - -static inline void chipcHw_miscControlDisable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */ - ); - -static inline void chipcHw_miscControlEnable(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_MISC_CTRL_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Set OTP options -* -* Set OTP options -* -* @return void -* -* @note use chipcHw_REG_OTP_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_setOTPOption(uint64_t mask /* [ IN ] Bit map of type chipcHw_REG_OTP_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Get sticky bits -* -* @return Sticky bit options of type chipcHw_REG_STICKY_XXXXXX -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getStickyBits(void); - -/****************************************************************************/ -/** -* @brief Set sticky bits -* -* @return void -* -* @note use chipcHw_REG_STICKY_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_setStickyBits(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Clear sticky bits -* -* @return void -* -* @note use chipcHw_REG_STICKY_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_clearStickyBits(uint32_t mask /* [ IN ] Bit map of type chipcHw_REG_STICKY_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Get software override strap options -* -* Retrieves software override strap options -* -* @return Software override strap value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getSoftStraps(void); - -/****************************************************************************/ -/** -* @brief Set software override strap options -* -* set software override strap options -* -* @return nothing -* -*/ -/****************************************************************************/ -static inline void chipcHw_setSoftStraps(uint32_t strapOptions); - -/****************************************************************************/ -/** -* @brief Get pin strap options -* -* Retrieves pin strap options -* -* @return Pin strap value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getPinStraps(void); - -/****************************************************************************/ -/** -* @brief Get valid pin strap options -* -* Retrieves valid pin strap options -* -* @return valid Pin strap value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getValidStraps(void); - -/****************************************************************************/ -/** -* @brief Initialize valid pin strap options -* -* Retrieves valid pin strap options by copying HW strap options to soft register -* (if chipcHw_STRAPS_SOFT_OVERRIDE not set) -* -* @return nothing -* -*/ -/****************************************************************************/ -static inline void chipcHw_initValidStraps(void); - -/****************************************************************************/ -/** -* @brief Get status (enabled/disabled) of bus interface clock -* -* This function returns the status of devices' bus interface clock -* -* @return Bus interface clock -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getBusInterfaceClockStatus(void); - -/****************************************************************************/ -/** -* @brief Get boot device -* -* This function returns the device type used in booting the system -* -* @return Boot device of type chipcHw_BOOT_DEVICE_e -* -*/ -/****************************************************************************/ -static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void); - -/****************************************************************************/ -/** -* @brief Get boot mode -* -* This function returns the way the system was booted -* -* @return Boot mode of type chipcHw_BOOT_MODE_e -* -*/ -/****************************************************************************/ -static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void); - -/****************************************************************************/ -/** -* @brief Get NAND flash page size -* -* This function returns the NAND device page size -* -* @return Boot NAND device page size -* -*/ -/****************************************************************************/ -static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void); - -/****************************************************************************/ -/** -* @brief Get NAND flash address cycle configuration -* -* This function returns the NAND flash address cycle configuration -* -* @return 0 = Do not extra address cycle, 1 = Add extra cycle -* -*/ -/****************************************************************************/ -static inline int chipcHw_getNandExtraCycle(void); - -/****************************************************************************/ -/** -* @brief Activates PIF interface -* -* This function activates PIF interface by taking control of LCD pins -* -* @note -* When activated, LCD pins will be defined as follows for PIF operation -* -* CLD[17:0] = pif_data[17:0] -* CLD[23:18] = pif_address[5:0] -* CLPOWER = pif_wr_str -* CLCP = pif_rd_str -* CLAC = pif_hat1 -* CLFP = pif_hrdy1 -* CLLP = pif_hat2 -* GPIO[42] = pif_hrdy2 -* -* In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_activatePifInterface(void); - -/****************************************************************************/ -/** -* @brief Activates LCD interface -* -* This function activates LCD interface -* -* @note -* When activated, LCD pins will be defined as follows -* -* CLD[17:0] = LCD data -* CLD[23:18] = LCD data -* CLPOWER = LCD power -* CLCP = -* CLAC = LCD ack -* CLFP = -* CLLP = -*/ -/****************************************************************************/ -static inline void chipcHw_activateLcdInterface(void); - -/****************************************************************************/ -/** -* @brief Deactivates PIF/LCD interface -* -* This function deactivates PIF/LCD interface -* -* @note -* When deactivated LCD pins will be in rti-stated -* -*/ -/****************************************************************************/ -static inline void chipcHw_deactivatePifLcdInterface(void); - -/****************************************************************************/ -/** -* @brief Get to know the configuration of GPIO pin -* -*/ -/****************************************************************************/ -static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin /* GPIO Pin number */ - ); - -/****************************************************************************/ -/** -* @brief Configure GPIO pin function -* -*/ -/****************************************************************************/ -static inline void chipcHw_setGpioPinFunction(int pin, /* GPIO Pin number */ - chipcHw_GPIO_FUNCTION_e func /* Configuration function */ - ); - -/****************************************************************************/ -/** -* @brief Set Pin slew rate -* -* This function sets the slew of individual pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_setPinSlewRate(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */ - chipcHw_PIN_SLEW_RATE_e slewRate /* Pin slew rate */ - ); - -/****************************************************************************/ -/** -* @brief Set Pin output drive current -* -* This function sets output drive current of individual pin -* -* Note: Avoid the use of the word 'current' since linux headers define this -* to be the current task. -*/ -/****************************************************************************/ -static inline void chipcHw_setPinOutputCurrent(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */ - chipcHw_PIN_CURRENT_STRENGTH_e curr /* Pin current rating */ - ); - -/****************************************************************************/ -/** -* @brief Set Pin pullup register -* -* This function sets pullup register of individual pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_setPinPullup(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */ - chipcHw_PIN_PULL_e pullup /* Pullup register settings */ - ); - -/****************************************************************************/ -/** -* @brief Set Pin input type -* -* This function sets input type of individual Pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_setPinInputType(uint32_t pin, /* Pin of type chipcHw_PIN_XXXXX */ - chipcHw_PIN_INPUTTYPE_e inputType /* Pin input type */ - ); - -/****************************************************************************/ -/** -* @brief Retrieves a string representation of the mux setting for a pin. -* -* @return Pointer to a character string. -*/ -/****************************************************************************/ - -const char *chipcHw_getGpioPinFunctionStr(int pin); - -/****************************************************************************/ -/** @brief issue warmReset - */ -/****************************************************************************/ -void chipcHw_reset(uint32_t mask); - -/****************************************************************************/ -/** @brief clock reconfigure - */ -/****************************************************************************/ -void chipcHw_clockReconfig(uint32_t busHz, uint32_t armRatio, uint32_t vpmRatio, - uint32_t ddrRatio); - -/****************************************************************************/ -/** -* @brief Enable Spread Spectrum -* -* @note chipcHw_Init() must be called earlier -*/ -/****************************************************************************/ -static inline void chipcHw_enableSpreadSpectrum(void); - -/****************************************************************************/ -/** -* @brief Disable Spread Spectrum -* -*/ -/****************************************************************************/ -static inline void chipcHw_disableSpreadSpectrum(void); - -/****************************************************************************/ -/** @brief Checks if software strap is enabled - * - * @return 1 : When enable - * 0 : When disable - */ -/****************************************************************************/ -static inline int chipcHw_isSoftwareStrapsEnable(void); - -/****************************************************************************/ -/** @brief Enable software strap - */ -/****************************************************************************/ -static inline void chipcHw_softwareStrapsEnable(void); - -/****************************************************************************/ -/** @brief Disable software strap - */ -/****************************************************************************/ -static inline void chipcHw_softwareStrapsDisable(void); - -/****************************************************************************/ -/** @brief PLL test enable - */ -/****************************************************************************/ -static inline void chipcHw_pllTestEnable(void); - -/****************************************************************************/ -/** @brief PLL2 test enable - */ -/****************************************************************************/ -static inline void chipcHw_pll2TestEnable(void); - -/****************************************************************************/ -/** @brief PLL test disable - */ -/****************************************************************************/ -static inline void chipcHw_pllTestDisable(void); - -/****************************************************************************/ -/** @brief PLL2 test disable - */ -/****************************************************************************/ -static inline void chipcHw_pll2TestDisable(void); - -/****************************************************************************/ -/** @brief Get PLL test status - */ -/****************************************************************************/ -static inline int chipcHw_isPllTestEnable(void); - -/****************************************************************************/ -/** @brief Get PLL2 test status - */ -/****************************************************************************/ -static inline int chipcHw_isPll2TestEnable(void); - -/****************************************************************************/ -/** @brief PLL test select - */ -/****************************************************************************/ -static inline void chipcHw_pllTestSelect(uint32_t val); - -/****************************************************************************/ -/** @brief PLL2 test select - */ -/****************************************************************************/ -static inline void chipcHw_pll2TestSelect(uint32_t val); - -/****************************************************************************/ -/** @brief Get PLL test selected option - */ -/****************************************************************************/ -static inline uint8_t chipcHw_getPllTestSelected(void); - -/****************************************************************************/ -/** @brief Get PLL2 test selected option - */ -/****************************************************************************/ -static inline uint8_t chipcHw_getPll2TestSelected(void); - -/****************************************************************************/ -/** -* @brief Enables DDR SW phase alignment interrupt -*/ -/****************************************************************************/ -static inline void chipcHw_ddrPhaseAlignInterruptEnable(void); - -/****************************************************************************/ -/** -* @brief Disables DDR SW phase alignment interrupt -*/ -/****************************************************************************/ -static inline void chipcHw_ddrPhaseAlignInterruptDisable(void); - -/****************************************************************************/ -/** -* @brief Set VPM SW phase alignment interrupt mode -* -* This function sets VPM phase alignment interrupt -* -*/ -/****************************************************************************/ -static inline void -chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode); - -/****************************************************************************/ -/** -* @brief Enable DDR phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrSwPhaseAlignEnable(void); - -/****************************************************************************/ -/** -* @brief Disable DDR phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrSwPhaseAlignDisable(void); - -/****************************************************************************/ -/** -* @brief Enable DDR phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignEnable(void); - -/****************************************************************************/ -/** -* @brief Disable DDR phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignDisable(void); - -/****************************************************************************/ -/** -* @brief Enable VPM phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmSwPhaseAlignEnable(void); - -/****************************************************************************/ -/** -* @brief Disable VPM phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmSwPhaseAlignDisable(void); - -/****************************************************************************/ -/** -* @brief Enable VPM phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignEnable(void); - -/****************************************************************************/ -/** -* @brief Disable VPM phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignDisable(void); - -/****************************************************************************/ -/** -* @brief Set DDR phase alignment margin in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin /* Margin alinging DDR phase */ - ); - -/****************************************************************************/ -/** -* @brief Set VPM phase alignment margin in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin /* Margin alinging VPM phase */ - ); - -/****************************************************************************/ -/** -* @brief Checks DDR phase aligned status done by HW -* -* @return 1: When aligned -* 0: When not aligned -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_isDdrHwPhaseAligned(void); - -/****************************************************************************/ -/** -* @brief Checks VPM phase aligned status done by HW -* -* @return 1: When aligned -* 0: When not aligned -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_isVpmHwPhaseAligned(void); - -/****************************************************************************/ -/** -* @brief Get DDR phase aligned status done by HW -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void); - -/****************************************************************************/ -/** -* @brief Get VPM phase aligned status done by HW -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void); - -/****************************************************************************/ -/** -* @brief Get DDR phase control value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getDdrPhaseControl(void); - -/****************************************************************************/ -/** -* @brief Get VPM phase control value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getVpmPhaseControl(void); - -/****************************************************************************/ -/** -* @brief DDR phase alignment timeout count -* -* @note If HW fails to perform the phase alignment, it will trigger -* a DDR phase alignment timeout interrupt. -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle /* Timeout in bus cycle */ - ); - -/****************************************************************************/ -/** -* @brief VPM phase alignment timeout count -* -* @note If HW fails to perform the phase alignment, it will trigger -* a VPM phase alignment timeout interrupt. -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle /* Timeout in bus cycle */ - ); - -/****************************************************************************/ -/** -* @brief DDR phase alignment timeout interrupt enable -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void); - -/****************************************************************************/ -/** -* @brief VPM phase alignment timeout interrupt enable -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void); - -/****************************************************************************/ -/** -* @brief DDR phase alignment timeout interrupt disable -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void); - -/****************************************************************************/ -/** -* @brief VPM phase alignment timeout interrupt disable -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void); - -/****************************************************************************/ -/** -* @brief Clear DDR phase alignment timeout interrupt -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void); - -/****************************************************************************/ -/** -* @brief Clear VPM phase alignment timeout interrupt -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void); - -/* ---- Private Constants and Types -------------------------------------- */ - -#endif /* CHIPC_DEF_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h deleted file mode 100644 index 03238c299001a9893dffc80561cca43664a4d404..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_inline.h +++ /dev/null @@ -1,1673 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef CHIPC_INLINE_H -#define CHIPC_INLINE_H - -/* ---- Include Files ----------------------------------------------------- */ - -#include -#include -#include -#include - -/* ---- Private Constants and Types --------------------------------------- */ -typedef enum { - chipcHw_OPTYPE_BYPASS, /* Bypass operation */ - chipcHw_OPTYPE_OUTPUT /* Output operation */ -} chipcHw_OPTYPE_e; - -/* ---- Public Constants and Types ---------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------- */ -/* ---- Public Function Prototypes ---------------------------------------- */ -/* ---- Private Function Prototypes --------------------------------------- */ -static inline void chipcHw_setClock(chipcHw_CLOCK_e clock, - chipcHw_OPTYPE_e type, int mode); - -/****************************************************************************/ -/** -* @brief Get Numeric Chip ID -* -* This function returns Chip ID that includes the revison number -* -* @return Complete numeric Chip ID -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getChipId(void) -{ - return pChipcHw->ChipId; -} - -/****************************************************************************/ -/** -* @brief Enable Spread Spectrum -* -* @note chipcHw_Init() must be called earlier -*/ -/****************************************************************************/ -static inline void chipcHw_enableSpreadSpectrum(void) -{ - if ((pChipcHw-> - PLLPreDivider & chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK) != - chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER) { - ddrcReg_PHY_ADDR_CTL_REGP->ssCfg = - (0xFFFF << ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT) | - (ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK << - ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT); - ddrcReg_PHY_ADDR_CTL_REGP->ssCtl |= - ddrcReg_PHY_ADDR_SS_CTRL_ENABLE; - } -} - -/****************************************************************************/ -/** -* @brief Disable Spread Spectrum -* -*/ -/****************************************************************************/ -static inline void chipcHw_disableSpreadSpectrum(void) -{ - ddrcReg_PHY_ADDR_CTL_REGP->ssCtl &= ~ddrcReg_PHY_ADDR_SS_CTRL_ENABLE; -} - -/****************************************************************************/ -/** -* @brief Get Chip Product ID -* -* This function returns Chip Product ID -* -* @return Chip Product ID -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getChipProductId(void) -{ - return (pChipcHw-> - ChipId & chipcHw_REG_CHIPID_BASE_MASK) >> - chipcHw_REG_CHIPID_BASE_SHIFT; -} - -/****************************************************************************/ -/** -* @brief Get revision number -* -* This function returns revision number of the chip -* -* @return Revision number -*/ -/****************************************************************************/ -static inline chipcHw_REV_NUMBER_e chipcHw_getChipRevisionNumber(void) -{ - return pChipcHw->ChipId & chipcHw_REG_CHIPID_REV_MASK; -} - -/****************************************************************************/ -/** -* @brief Enables bus interface clock -* -* Enables bus interface clock of various device -* -* @return void -* -* @note use chipcHw_REG_BUS_CLOCK_XXXX for mask -*/ -/****************************************************************************/ -static inline void chipcHw_busInterfaceClockEnable(uint32_t mask) -{ - reg32_modify_or(&pChipcHw->BusIntfClock, mask); -} - -/****************************************************************************/ -/** -* @brief Disables bus interface clock -* -* Disables bus interface clock of various device -* -* @return void -* -* @note use chipcHw_REG_BUS_CLOCK_XXXX -*/ -/****************************************************************************/ -static inline void chipcHw_busInterfaceClockDisable(uint32_t mask) -{ - reg32_modify_and(&pChipcHw->BusIntfClock, ~mask); -} - -/****************************************************************************/ -/** -* @brief Get status (enabled/disabled) of bus interface clock -* -* This function returns the status of devices' bus interface clock -* -* @return Bus interface clock -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getBusInterfaceClockStatus(void) -{ - return pChipcHw->BusIntfClock; -} - -/****************************************************************************/ -/** -* @brief Enables various audio channels -* -* Enables audio channel -* -* @return void -* -* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_audioChannelEnable(uint32_t mask) -{ - reg32_modify_or(&pChipcHw->AudioEnable, mask); -} - -/****************************************************************************/ -/** -* @brief Disables various audio channels -* -* Disables audio channel -* -* @return void -* -* @note use chipcHw_REG_AUDIO_CHANNEL_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_audioChannelDisable(uint32_t mask) -{ - reg32_modify_and(&pChipcHw->AudioEnable, ~mask); -} - -/****************************************************************************/ -/** -* @brief Soft resets devices -* -* Soft resets various devices -* -* @return void -* -* @note use chipcHw_REG_SOFT_RESET_XXXXXX defines -*/ -/****************************************************************************/ -static inline void chipcHw_softReset(uint64_t mask) -{ - chipcHw_softResetEnable(mask); - chipcHw_softResetDisable(mask); -} - -static inline void chipcHw_softResetDisable(uint64_t mask) -{ - uint32_t ctrl1 = (uint32_t) mask; - uint32_t ctrl2 = (uint32_t) (mask >> 32); - - /* Deassert module soft reset */ - REG_LOCAL_IRQ_SAVE; - pChipcHw->SoftReset1 ^= ctrl1; - pChipcHw->SoftReset2 ^= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)); - REG_LOCAL_IRQ_RESTORE; -} - -static inline void chipcHw_softResetEnable(uint64_t mask) -{ - uint32_t ctrl1 = (uint32_t) mask; - uint32_t ctrl2 = (uint32_t) (mask >> 32); - uint32_t unhold = 0; - - REG_LOCAL_IRQ_SAVE; - pChipcHw->SoftReset1 |= ctrl1; - /* Mask out unhold request bits */ - pChipcHw->SoftReset2 |= (ctrl2 & (~chipcHw_REG_SOFT_RESET_UNHOLD_MASK)); - - /* Process unhold requests */ - if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD) { - unhold = chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD; - } - - if (ctrl2 & chipcHw_REG_SOFT_RESET_VPM_UNHOLD) { - unhold |= chipcHw_REG_SOFT_RESET_VPM_HOLD; - } - - if (ctrl2 & chipcHw_REG_SOFT_RESET_ARM_UNHOLD) { - unhold |= chipcHw_REG_SOFT_RESET_ARM_HOLD; - } - - if (unhold) { - /* Make sure unhold request is effective */ - pChipcHw->SoftReset1 &= ~unhold; - } - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Configures misc CHIP functionality -* -* Configures CHIP functionality -* -* @return void -* -* @note use chipcHw_REG_MISC_CTRL_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_miscControl(uint32_t mask) -{ - reg32_write(&pChipcHw->MiscCtrl, mask); -} - -static inline void chipcHw_miscControlDisable(uint32_t mask) -{ - reg32_modify_and(&pChipcHw->MiscCtrl, ~mask); -} - -static inline void chipcHw_miscControlEnable(uint32_t mask) -{ - reg32_modify_or(&pChipcHw->MiscCtrl, mask); -} - -/****************************************************************************/ -/** -* @brief Set OTP options -* -* Set OTP options -* -* @return void -* -* @note use chipcHw_REG_OTP_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_setOTPOption(uint64_t mask) -{ - uint32_t ctrl1 = (uint32_t) mask; - uint32_t ctrl2 = (uint32_t) (mask >> 32); - - reg32_modify_or(&pChipcHw->SoftOTP1, ctrl1); - reg32_modify_or(&pChipcHw->SoftOTP2, ctrl2); -} - -/****************************************************************************/ -/** -* @brief Get sticky bits -* -* @return Sticky bit options of type chipcHw_REG_STICKY_XXXXXX -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getStickyBits(void) -{ - return pChipcHw->Sticky; -} - -/****************************************************************************/ -/** -* @brief Set sticky bits -* -* @return void -* -* @note use chipcHw_REG_STICKY_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_setStickyBits(uint32_t mask) -{ - uint32_t bits = 0; - - REG_LOCAL_IRQ_SAVE; - if (mask & chipcHw_REG_STICKY_POR_BROM) { - bits |= chipcHw_REG_STICKY_POR_BROM; - } else { - uint32_t sticky; - sticky = pChipcHw->Sticky; - - if ((mask & chipcHw_REG_STICKY_BOOT_DONE) - && (sticky & chipcHw_REG_STICKY_BOOT_DONE) == 0) { - bits |= chipcHw_REG_STICKY_BOOT_DONE; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_1) - && (sticky & chipcHw_REG_STICKY_GENERAL_1) == 0) { - bits |= chipcHw_REG_STICKY_GENERAL_1; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_2) - && (sticky & chipcHw_REG_STICKY_GENERAL_2) == 0) { - bits |= chipcHw_REG_STICKY_GENERAL_2; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_3) - && (sticky & chipcHw_REG_STICKY_GENERAL_3) == 0) { - bits |= chipcHw_REG_STICKY_GENERAL_3; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_4) - && (sticky & chipcHw_REG_STICKY_GENERAL_4) == 0) { - bits |= chipcHw_REG_STICKY_GENERAL_4; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_5) - && (sticky & chipcHw_REG_STICKY_GENERAL_5) == 0) { - bits |= chipcHw_REG_STICKY_GENERAL_5; - } - } - pChipcHw->Sticky = bits; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Clear sticky bits -* -* @return void -* -* @note use chipcHw_REG_STICKY_XXXXXX -*/ -/****************************************************************************/ -static inline void chipcHw_clearStickyBits(uint32_t mask) -{ - uint32_t bits = 0; - - REG_LOCAL_IRQ_SAVE; - if (mask & - (chipcHw_REG_STICKY_BOOT_DONE | chipcHw_REG_STICKY_GENERAL_1 | - chipcHw_REG_STICKY_GENERAL_2 | chipcHw_REG_STICKY_GENERAL_3 | - chipcHw_REG_STICKY_GENERAL_4 | chipcHw_REG_STICKY_GENERAL_5)) { - uint32_t sticky = pChipcHw->Sticky; - - if ((mask & chipcHw_REG_STICKY_BOOT_DONE) - && (sticky & chipcHw_REG_STICKY_BOOT_DONE)) { - bits = chipcHw_REG_STICKY_BOOT_DONE; - mask &= ~chipcHw_REG_STICKY_BOOT_DONE; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_1) - && (sticky & chipcHw_REG_STICKY_GENERAL_1)) { - bits |= chipcHw_REG_STICKY_GENERAL_1; - mask &= ~chipcHw_REG_STICKY_GENERAL_1; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_2) - && (sticky & chipcHw_REG_STICKY_GENERAL_2)) { - bits |= chipcHw_REG_STICKY_GENERAL_2; - mask &= ~chipcHw_REG_STICKY_GENERAL_2; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_3) - && (sticky & chipcHw_REG_STICKY_GENERAL_3)) { - bits |= chipcHw_REG_STICKY_GENERAL_3; - mask &= ~chipcHw_REG_STICKY_GENERAL_3; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_4) - && (sticky & chipcHw_REG_STICKY_GENERAL_4)) { - bits |= chipcHw_REG_STICKY_GENERAL_4; - mask &= ~chipcHw_REG_STICKY_GENERAL_4; - } - if ((mask & chipcHw_REG_STICKY_GENERAL_5) - && (sticky & chipcHw_REG_STICKY_GENERAL_5)) { - bits |= chipcHw_REG_STICKY_GENERAL_5; - mask &= ~chipcHw_REG_STICKY_GENERAL_5; - } - } - pChipcHw->Sticky = bits | mask; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Get software strap value -* -* Retrieves software strap value -* -* @return Software strap value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getSoftStraps(void) -{ - return pChipcHw->SoftStraps; -} - -/****************************************************************************/ -/** -* @brief Set software override strap options -* -* set software override strap options -* -* @return nothing -* -*/ -/****************************************************************************/ -static inline void chipcHw_setSoftStraps(uint32_t strapOptions) -{ - reg32_write(&pChipcHw->SoftStraps, strapOptions); -} - -/****************************************************************************/ -/** -* @brief Get Pin Strap Options -* -* This function returns the raw boot strap options -* -* @return strap options -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getPinStraps(void) -{ - return pChipcHw->PinStraps; -} - -/****************************************************************************/ -/** -* @brief Get Valid Strap Options -* -* This function returns the valid raw boot strap options -* -* @return strap options -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getValidStraps(void) -{ - uint32_t softStraps; - - /* - ** Always return the SoftStraps - bootROM calls chipcHw_initValidStraps - ** which copies HW straps to soft straps if there is no override - */ - softStraps = chipcHw_getSoftStraps(); - - return softStraps; -} - -/****************************************************************************/ -/** -* @brief Initialize valid pin strap options -* -* Retrieves valid pin strap options by copying HW strap options to soft register -* (if chipcHw_STRAPS_SOFT_OVERRIDE not set) -* -* @return nothing -* -*/ -/****************************************************************************/ -static inline void chipcHw_initValidStraps(void) -{ - uint32_t softStraps; - - REG_LOCAL_IRQ_SAVE; - softStraps = chipcHw_getSoftStraps(); - - if ((softStraps & chipcHw_STRAPS_SOFT_OVERRIDE) == 0) { - /* Copy HW straps to software straps */ - chipcHw_setSoftStraps(chipcHw_getPinStraps()); - } - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Get boot device -* -* This function returns the device type used in booting the system -* -* @return Boot device of type chipcHw_BOOT_DEVICE -* -*/ -/****************************************************************************/ -static inline chipcHw_BOOT_DEVICE_e chipcHw_getBootDevice(void) -{ - return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_DEVICE_MASK; -} - -/****************************************************************************/ -/** -* @brief Get boot mode -* -* This function returns the way the system was booted -* -* @return Boot mode of type chipcHw_BOOT_MODE -* -*/ -/****************************************************************************/ -static inline chipcHw_BOOT_MODE_e chipcHw_getBootMode(void) -{ - return chipcHw_getValidStraps() & chipcHw_STRAPS_BOOT_MODE_MASK; -} - -/****************************************************************************/ -/** -* @brief Get NAND flash page size -* -* This function returns the NAND device page size -* -* @return Boot NAND device page size -* -*/ -/****************************************************************************/ -static inline chipcHw_NAND_PAGESIZE_e chipcHw_getNandPageSize(void) -{ - return chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_PAGESIZE_MASK; -} - -/****************************************************************************/ -/** -* @brief Get NAND flash address cycle configuration -* -* This function returns the NAND flash address cycle configuration -* -* @return 0 = Do not extra address cycle, 1 = Add extra cycle -* -*/ -/****************************************************************************/ -static inline int chipcHw_getNandExtraCycle(void) -{ - if (chipcHw_getValidStraps() & chipcHw_STRAPS_NAND_EXTRA_CYCLE) { - return 1; - } else { - return 0; - } -} - -/****************************************************************************/ -/** -* @brief Activates PIF interface -* -* This function activates PIF interface by taking control of LCD pins -* -* @note -* When activated, LCD pins will be defined as follows for PIF operation -* -* CLD[17:0] = pif_data[17:0] -* CLD[23:18] = pif_address[5:0] -* CLPOWER = pif_wr_str -* CLCP = pif_rd_str -* CLAC = pif_hat1 -* CLFP = pif_hrdy1 -* CLLP = pif_hat2 -* GPIO[42] = pif_hrdy2 -* -* In PIF mode, "pif_hrdy2" overrides other shared function for GPIO[42] pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_activatePifInterface(void) -{ - reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_PIF_PIN_ENABLE); -} - -/****************************************************************************/ -/** -* @brief Activates LCD interface -* -* This function activates LCD interface -* -* @note -* When activated, LCD pins will be defined as follows -* -* CLD[17:0] = LCD data -* CLD[23:18] = LCD data -* CLPOWER = LCD power -* CLCP = -* CLAC = LCD ack -* CLFP = -* CLLP = -*/ -/****************************************************************************/ -static inline void chipcHw_activateLcdInterface(void) -{ - reg32_write(&pChipcHw->LcdPifMode, chipcHw_REG_LCD_PIN_ENABLE); -} - -/****************************************************************************/ -/** -* @brief Deactivates PIF/LCD interface -* -* This function deactivates PIF/LCD interface -* -* @note -* When deactivated LCD pins will be in rti-stated -* -*/ -/****************************************************************************/ -static inline void chipcHw_deactivatePifLcdInterface(void) -{ - reg32_write(&pChipcHw->LcdPifMode, 0); -} - -/****************************************************************************/ -/** -* @brief Select GE2 -* -* This function select GE2 as the graphic engine -* -*/ -/****************************************************************************/ -static inline void chipcHw_selectGE2(void) -{ - reg32_modify_and(&pChipcHw->MiscCtrl, ~chipcHw_REG_MISC_CTRL_GE_SEL); -} - -/****************************************************************************/ -/** -* @brief Select GE3 -* -* This function select GE3 as the graphic engine -* -*/ -/****************************************************************************/ -static inline void chipcHw_selectGE3(void) -{ - reg32_modify_or(&pChipcHw->MiscCtrl, chipcHw_REG_MISC_CTRL_GE_SEL); -} - -/****************************************************************************/ -/** -* @brief Get to know the configuration of GPIO pin -* -*/ -/****************************************************************************/ -static inline chipcHw_GPIO_FUNCTION_e chipcHw_getGpioPinFunction(int pin) -{ - return (*((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) & - (chipcHw_REG_GPIO_MUX_MASK << - chipcHw_REG_GPIO_MUX_POSITION(pin))) >> - chipcHw_REG_GPIO_MUX_POSITION(pin); -} - -/****************************************************************************/ -/** -* @brief Configure GPIO pin function -* -*/ -/****************************************************************************/ -static inline void chipcHw_setGpioPinFunction(int pin, - chipcHw_GPIO_FUNCTION_e func) -{ - REG_LOCAL_IRQ_SAVE; - *((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) &= - ~(chipcHw_REG_GPIO_MUX_MASK << chipcHw_REG_GPIO_MUX_POSITION(pin)); - *((uint32_t *) chipcHw_REG_GPIO_MUX(pin)) |= - func << chipcHw_REG_GPIO_MUX_POSITION(pin); - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Set Pin slew rate -* -* This function sets the slew of individual pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_setPinSlewRate(uint32_t pin, - chipcHw_PIN_SLEW_RATE_e slewRate) -{ - REG_LOCAL_IRQ_SAVE; - *((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) &= - ~(chipcHw_REG_SLEW_RATE_MASK << - chipcHw_REG_SLEW_RATE_POSITION(pin)); - *((uint32_t *) chipcHw_REG_SLEW_RATE(pin)) |= - (uint32_t) slewRate << chipcHw_REG_SLEW_RATE_POSITION(pin); - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Set Pin output drive current -* -* This function sets output drive current of individual pin -* -* Note: Avoid the use of the word 'current' since linux headers define this -* to be the current task. -*/ -/****************************************************************************/ -static inline void chipcHw_setPinOutputCurrent(uint32_t pin, - chipcHw_PIN_CURRENT_STRENGTH_e - curr) -{ - REG_LOCAL_IRQ_SAVE; - *((uint32_t *) chipcHw_REG_CURRENT(pin)) &= - ~(chipcHw_REG_CURRENT_MASK << chipcHw_REG_CURRENT_POSITION(pin)); - *((uint32_t *) chipcHw_REG_CURRENT(pin)) |= - (uint32_t) curr << chipcHw_REG_CURRENT_POSITION(pin); - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Set Pin pullup register -* -* This function sets pullup register of individual pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_setPinPullup(uint32_t pin, chipcHw_PIN_PULL_e pullup) -{ - REG_LOCAL_IRQ_SAVE; - *((uint32_t *) chipcHw_REG_PULLUP(pin)) &= - ~(chipcHw_REG_PULLUP_MASK << chipcHw_REG_PULLUP_POSITION(pin)); - *((uint32_t *) chipcHw_REG_PULLUP(pin)) |= - (uint32_t) pullup << chipcHw_REG_PULLUP_POSITION(pin); - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Set Pin input type -* -* This function sets input type of individual pin -* -*/ -/****************************************************************************/ -static inline void chipcHw_setPinInputType(uint32_t pin, - chipcHw_PIN_INPUTTYPE_e inputType) -{ - REG_LOCAL_IRQ_SAVE; - *((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) &= - ~(chipcHw_REG_INPUTTYPE_MASK << - chipcHw_REG_INPUTTYPE_POSITION(pin)); - *((uint32_t *) chipcHw_REG_INPUTTYPE(pin)) |= - (uint32_t) inputType << chipcHw_REG_INPUTTYPE_POSITION(pin); - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Power up the USB PHY -* -* This function powers up the USB PHY -* -*/ -/****************************************************************************/ -static inline void chipcHw_powerUpUsbPhy(void) -{ - reg32_modify_and(&pChipcHw->MiscCtrl, - chipcHw_REG_MISC_CTRL_USB_POWERON); -} - -/****************************************************************************/ -/** -* @brief Power down the USB PHY -* -* This function powers down the USB PHY -* -*/ -/****************************************************************************/ -static inline void chipcHw_powerDownUsbPhy(void) -{ - reg32_modify_or(&pChipcHw->MiscCtrl, - chipcHw_REG_MISC_CTRL_USB_POWEROFF); -} - -/****************************************************************************/ -/** -* @brief Set the 2nd USB as host -* -* This function sets the 2nd USB as host -* -*/ -/****************************************************************************/ -static inline void chipcHw_setUsbHost(void) -{ - reg32_modify_or(&pChipcHw->MiscCtrl, - chipcHw_REG_MISC_CTRL_USB_MODE_HOST); -} - -/****************************************************************************/ -/** -* @brief Set the 2nd USB as device -* -* This function sets the 2nd USB as device -* -*/ -/****************************************************************************/ -static inline void chipcHw_setUsbDevice(void) -{ - reg32_modify_and(&pChipcHw->MiscCtrl, - chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE); -} - -/****************************************************************************/ -/** -* @brief Lower layer function to enable/disable a clock of a certain device -* -* This function enables/disables a core clock -* -*/ -/****************************************************************************/ -static inline void chipcHw_setClock(chipcHw_CLOCK_e clock, - chipcHw_OPTYPE_e type, int mode) -{ - volatile uint32_t *pPLLReg = (uint32_t *) 0x0; - volatile uint32_t *pClockCtrl = (uint32_t *) 0x0; - - switch (clock) { - case chipcHw_CLOCK_DDR: - pPLLReg = &pChipcHw->DDRClock; - break; - case chipcHw_CLOCK_ARM: - pPLLReg = &pChipcHw->ARMClock; - break; - case chipcHw_CLOCK_ESW: - pPLLReg = &pChipcHw->ESWClock; - break; - case chipcHw_CLOCK_VPM: - pPLLReg = &pChipcHw->VPMClock; - break; - case chipcHw_CLOCK_ESW125: - pPLLReg = &pChipcHw->ESW125Clock; - break; - case chipcHw_CLOCK_UART: - pPLLReg = &pChipcHw->UARTClock; - break; - case chipcHw_CLOCK_SDIO0: - pPLLReg = &pChipcHw->SDIO0Clock; - break; - case chipcHw_CLOCK_SDIO1: - pPLLReg = &pChipcHw->SDIO1Clock; - break; - case chipcHw_CLOCK_SPI: - pPLLReg = &pChipcHw->SPIClock; - break; - case chipcHw_CLOCK_ETM: - pPLLReg = &pChipcHw->ETMClock; - break; - case chipcHw_CLOCK_USB: - pPLLReg = &pChipcHw->USBClock; - if (type == chipcHw_OPTYPE_OUTPUT) { - if (mode) { - reg32_modify_and(pPLLReg, - ~chipcHw_REG_PLL_CLOCK_POWER_DOWN); - } else { - reg32_modify_or(pPLLReg, - chipcHw_REG_PLL_CLOCK_POWER_DOWN); - } - } - break; - case chipcHw_CLOCK_LCD: - pPLLReg = &pChipcHw->LCDClock; - if (type == chipcHw_OPTYPE_OUTPUT) { - if (mode) { - reg32_modify_and(pPLLReg, - ~chipcHw_REG_PLL_CLOCK_POWER_DOWN); - } else { - reg32_modify_or(pPLLReg, - chipcHw_REG_PLL_CLOCK_POWER_DOWN); - } - } - break; - case chipcHw_CLOCK_APM: - pPLLReg = &pChipcHw->APMClock; - if (type == chipcHw_OPTYPE_OUTPUT) { - if (mode) { - reg32_modify_and(pPLLReg, - ~chipcHw_REG_PLL_CLOCK_POWER_DOWN); - } else { - reg32_modify_or(pPLLReg, - chipcHw_REG_PLL_CLOCK_POWER_DOWN); - } - } - break; - case chipcHw_CLOCK_BUS: - pClockCtrl = &pChipcHw->ACLKClock; - break; - case chipcHw_CLOCK_OTP: - pClockCtrl = &pChipcHw->OTPClock; - break; - case chipcHw_CLOCK_I2C: - pClockCtrl = &pChipcHw->I2CClock; - break; - case chipcHw_CLOCK_I2S0: - pClockCtrl = &pChipcHw->I2S0Clock; - break; - case chipcHw_CLOCK_RTBUS: - pClockCtrl = &pChipcHw->RTBUSClock; - break; - case chipcHw_CLOCK_APM100: - pClockCtrl = &pChipcHw->APM100Clock; - break; - case chipcHw_CLOCK_TSC: - pClockCtrl = &pChipcHw->TSCClock; - break; - case chipcHw_CLOCK_LED: - pClockCtrl = &pChipcHw->LEDClock; - break; - case chipcHw_CLOCK_I2S1: - pClockCtrl = &pChipcHw->I2S1Clock; - break; - } - - if (pPLLReg) { - switch (type) { - case chipcHw_OPTYPE_OUTPUT: - /* PLL clock output enable/disable */ - if (mode) { - if (clock == chipcHw_CLOCK_DDR) { - /* DDR clock enable is inverted */ - reg32_modify_and(pPLLReg, - ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE); - } else { - reg32_modify_or(pPLLReg, - chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE); - } - } else { - if (clock == chipcHw_CLOCK_DDR) { - /* DDR clock disable is inverted */ - reg32_modify_or(pPLLReg, - chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE); - } else { - reg32_modify_and(pPLLReg, - ~chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE); - } - } - break; - case chipcHw_OPTYPE_BYPASS: - /* PLL clock bypass enable/disable */ - if (mode) { - reg32_modify_or(pPLLReg, - chipcHw_REG_PLL_CLOCK_BYPASS_SELECT); - } else { - reg32_modify_and(pPLLReg, - ~chipcHw_REG_PLL_CLOCK_BYPASS_SELECT); - } - break; - } - } else if (pClockCtrl) { - switch (type) { - case chipcHw_OPTYPE_OUTPUT: - if (mode) { - reg32_modify_or(pClockCtrl, - chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE); - } else { - reg32_modify_and(pClockCtrl, - ~chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE); - } - break; - case chipcHw_OPTYPE_BYPASS: - if (mode) { - reg32_modify_or(pClockCtrl, - chipcHw_REG_DIV_CLOCK_BYPASS_SELECT); - } else { - reg32_modify_and(pClockCtrl, - ~chipcHw_REG_DIV_CLOCK_BYPASS_SELECT); - } - break; - } - } -} - -/****************************************************************************/ -/** -* @brief Disables a core clock of a certain device -* -* This function disables a core clock -* -* @note no change in power consumption -*/ -/****************************************************************************/ -static inline void chipcHw_setClockDisable(chipcHw_CLOCK_e clock) -{ - - /* Disable output of the clock */ - chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 0); -} - -/****************************************************************************/ -/** -* @brief Enable a core clock of a certain device -* -* This function enables a core clock -* -* @note no change in power consumption -*/ -/****************************************************************************/ -static inline void chipcHw_setClockEnable(chipcHw_CLOCK_e clock) -{ - - /* Enable output of the clock */ - chipcHw_setClock(clock, chipcHw_OPTYPE_OUTPUT, 1); -} - -/****************************************************************************/ -/** -* @brief Enables bypass clock of a certain device -* -* This function enables bypass clock -* -* @note Doesnot affect the bus interface clock -*/ -/****************************************************************************/ -static inline void chipcHw_bypassClockEnable(chipcHw_CLOCK_e clock) -{ - /* Enable bypass clock */ - chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 1); -} - -/****************************************************************************/ -/** -* @brief Disabled bypass clock of a certain device -* -* This function disables bypass clock -* -* @note Doesnot affect the bus interface clock -*/ -/****************************************************************************/ -static inline void chipcHw_bypassClockDisable(chipcHw_CLOCK_e clock) -{ - /* Disable bypass clock */ - chipcHw_setClock(clock, chipcHw_OPTYPE_BYPASS, 0); - -} - -/****************************************************************************/ -/** @brief Checks if software strap is enabled - * - * @return 1 : When enable - * 0 : When disable - */ -/****************************************************************************/ -static inline int chipcHw_isSoftwareStrapsEnable(void) -{ - return pChipcHw->SoftStraps & 0x00000001; -} - -/****************************************************************************/ -/** @brief Enable software strap - */ -/****************************************************************************/ -static inline void chipcHw_softwareStrapsEnable(void) -{ - reg32_modify_or(&pChipcHw->SoftStraps, 0x00000001); -} - -/****************************************************************************/ -/** @brief Disable software strap - */ -/****************************************************************************/ -static inline void chipcHw_softwareStrapsDisable(void) -{ - reg32_modify_and(&pChipcHw->SoftStraps, (~0x00000001)); -} - -/****************************************************************************/ -/** @brief PLL test enable - */ -/****************************************************************************/ -static inline void chipcHw_pllTestEnable(void) -{ - reg32_modify_or(&pChipcHw->PLLConfig, - chipcHw_REG_PLL_CONFIG_TEST_ENABLE); -} - -/****************************************************************************/ -/** @brief PLL2 test enable - */ -/****************************************************************************/ -static inline void chipcHw_pll2TestEnable(void) -{ - reg32_modify_or(&pChipcHw->PLLConfig2, - chipcHw_REG_PLL_CONFIG_TEST_ENABLE); -} - -/****************************************************************************/ -/** @brief PLL test disable - */ -/****************************************************************************/ -static inline void chipcHw_pllTestDisable(void) -{ - reg32_modify_and(&pChipcHw->PLLConfig, - ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE); -} - -/****************************************************************************/ -/** @brief PLL2 test disable - */ -/****************************************************************************/ -static inline void chipcHw_pll2TestDisable(void) -{ - reg32_modify_and(&pChipcHw->PLLConfig2, - ~chipcHw_REG_PLL_CONFIG_TEST_ENABLE); -} - -/****************************************************************************/ -/** @brief Get PLL test status - */ -/****************************************************************************/ -static inline int chipcHw_isPllTestEnable(void) -{ - return pChipcHw->PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; -} - -/****************************************************************************/ -/** @brief Get PLL2 test status - */ -/****************************************************************************/ -static inline int chipcHw_isPll2TestEnable(void) -{ - return pChipcHw->PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_ENABLE; -} - -/****************************************************************************/ -/** @brief PLL test select - */ -/****************************************************************************/ -static inline void chipcHw_pllTestSelect(uint32_t val) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK; - pChipcHw->PLLConfig |= - (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** @brief PLL2 test select - */ -/****************************************************************************/ -static inline void chipcHw_pll2TestSelect(uint32_t val) -{ - - REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig2 &= ~chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK; - pChipcHw->PLLConfig2 |= - (val) << chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** @brief Get PLL test selected option - */ -/****************************************************************************/ -static inline uint8_t chipcHw_getPllTestSelected(void) -{ - return (uint8_t) ((pChipcHw-> - PLLConfig & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) - >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT); -} - -/****************************************************************************/ -/** @brief Get PLL2 test selected option - */ -/****************************************************************************/ -static inline uint8_t chipcHw_getPll2TestSelected(void) -{ - return (uint8_t) ((pChipcHw-> - PLLConfig2 & chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK) - >> chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT); -} - -/****************************************************************************/ -/** -* @brief Disable the PLL1 -* -*/ -/****************************************************************************/ -static inline void chipcHw_pll1Disable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig |= chipcHw_REG_PLL_CONFIG_POWER_DOWN; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Disable the PLL2 -* -*/ -/****************************************************************************/ -static inline void chipcHw_pll2Disable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->PLLConfig2 |= chipcHw_REG_PLL_CONFIG_POWER_DOWN; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Enables DDR SW phase alignment interrupt -*/ -/****************************************************************************/ -static inline void chipcHw_ddrPhaseAlignInterruptEnable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->Spare1 |= chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Disables DDR SW phase alignment interrupt -*/ -/****************************************************************************/ -static inline void chipcHw_ddrPhaseAlignInterruptDisable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Set VPM SW phase alignment interrupt mode -* -* This function sets VPM phase alignment interrupt -*/ -/****************************************************************************/ -static inline void -chipcHw_vpmPhaseAlignInterruptMode(chipcHw_VPM_HW_PHASE_INTR_e mode) -{ - REG_LOCAL_IRQ_SAVE; - if (mode == chipcHw_VPM_HW_PHASE_INTR_DISABLE) { - pChipcHw->Spare1 &= ~chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE; - } else { - pChipcHw->Spare1 |= chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE; - } - pChipcHw->VPMPhaseCtrl2 = - (pChipcHw-> - VPMPhaseCtrl2 & ~(chipcHw_REG_VPM_INTR_SELECT_MASK << - chipcHw_REG_VPM_INTR_SELECT_SHIFT)) | mode; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Enable DDR phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrSwPhaseAlignEnable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Disable DDR phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrSwPhaseAlignDisable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Enable DDR phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignEnable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->DDRPhaseCtrl1 |= chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Disable DDR phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignDisable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->DDRPhaseCtrl1 &= ~chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Enable VPM phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmSwPhaseAlignEnable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Disable VPM phase alignment in software -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmSwPhaseAlignDisable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Enable VPM phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignEnable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl1 |= chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Disable VPM phase alignment in hardware -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignDisable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl1 &= ~chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Set DDR phase alignment margin in hardware -* -*/ -/****************************************************************************/ -static inline void -chipcHw_setDdrHwPhaseAlignMargin(chipcHw_DDR_HW_PHASE_MARGIN_e margin) -{ - uint32_t ge = 0; - uint32_t le = 0; - - switch (margin) { - case chipcHw_DDR_HW_PHASE_MARGIN_STRICT: - ge = 0x0F; - le = 0x0F; - break; - case chipcHw_DDR_HW_PHASE_MARGIN_MEDIUM: - ge = 0x03; - le = 0x3F; - break; - case chipcHw_DDR_HW_PHASE_MARGIN_WIDE: - ge = 0x01; - le = 0x7F; - break; - } - - { - REG_LOCAL_IRQ_SAVE; - - pChipcHw->DDRPhaseCtrl1 &= - ~((chipcHw_REG_DDR_PHASE_VALUE_GE_MASK << - chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT) - || (chipcHw_REG_DDR_PHASE_VALUE_LE_MASK << - chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT)); - - pChipcHw->DDRPhaseCtrl1 |= - ((ge << chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT) - || (le << chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT)); - - REG_LOCAL_IRQ_RESTORE; - } -} - -/****************************************************************************/ -/** -* @brief Set VPM phase alignment margin in hardware -* -*/ -/****************************************************************************/ -static inline void -chipcHw_setVpmHwPhaseAlignMargin(chipcHw_VPM_HW_PHASE_MARGIN_e margin) -{ - uint32_t ge = 0; - uint32_t le = 0; - - switch (margin) { - case chipcHw_VPM_HW_PHASE_MARGIN_STRICT: - ge = 0x0F; - le = 0x0F; - break; - case chipcHw_VPM_HW_PHASE_MARGIN_MEDIUM: - ge = 0x03; - le = 0x3F; - break; - case chipcHw_VPM_HW_PHASE_MARGIN_WIDE: - ge = 0x01; - le = 0x7F; - break; - } - - { - REG_LOCAL_IRQ_SAVE; - - pChipcHw->VPMPhaseCtrl1 &= - ~((chipcHw_REG_VPM_PHASE_VALUE_GE_MASK << - chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT) - || (chipcHw_REG_VPM_PHASE_VALUE_LE_MASK << - chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT)); - - pChipcHw->VPMPhaseCtrl1 |= - ((ge << chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT) - || (le << chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT)); - - REG_LOCAL_IRQ_RESTORE; - } -} - -/****************************************************************************/ -/** -* @brief Checks DDR phase aligned status done by HW -* -* @return 1: When aligned -* 0: When not aligned -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_isDdrHwPhaseAligned(void) -{ - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_ALIGNED) ? 1 : 0; -} - -/****************************************************************************/ -/** -* @brief Checks VPM phase aligned status done by HW -* -* @return 1: When aligned -* 0: When not aligned -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_isVpmHwPhaseAligned(void) -{ - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_ALIGNED) ? 1 : 0; -} - -/****************************************************************************/ -/** -* @brief Get DDR phase aligned status done by HW -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getDdrHwPhaseAlignStatus(void) -{ - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_STATUS_MASK) >> - chipcHw_REG_DDR_PHASE_STATUS_SHIFT; -} - -/****************************************************************************/ -/** -* @brief Get VPM phase aligned status done by HW -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getVpmHwPhaseAlignStatus(void) -{ - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_STATUS_MASK) >> - chipcHw_REG_VPM_PHASE_STATUS_SHIFT; -} - -/****************************************************************************/ -/** -* @brief Get DDR phase control value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getDdrPhaseControl(void) -{ - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_DDR_PHASE_CTRL_MASK) >> - chipcHw_REG_DDR_PHASE_CTRL_SHIFT; -} - -/****************************************************************************/ -/** -* @brief Get VPM phase control value -* -*/ -/****************************************************************************/ -static inline uint32_t chipcHw_getVpmPhaseControl(void) -{ - return (pChipcHw-> - PhaseAlignStatus & chipcHw_REG_VPM_PHASE_CTRL_MASK) >> - chipcHw_REG_VPM_PHASE_CTRL_SHIFT; -} - -/****************************************************************************/ -/** -* @brief DDR phase alignment timeout count -* -* @note If HW fails to perform the phase alignment, it will trigger -* a DDR phase alignment timeout interrupt. -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeout(uint32_t busCycle) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->DDRPhaseCtrl2 &= - ~(chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK << - chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT); - pChipcHw->DDRPhaseCtrl2 |= - (busCycle & chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK) << - chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief VPM phase alignment timeout count -* -* @note If HW fails to perform the phase alignment, it will trigger -* a VPM phase alignment timeout interrupt. -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeout(uint32_t busCycle) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl2 &= - ~(chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK << - chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT); - pChipcHw->VPMPhaseCtrl2 |= - (busCycle & chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK) << - chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Clear DDR phase alignment timeout interrupt -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(void) -{ - REG_LOCAL_IRQ_SAVE; - /* Clear timeout interrupt service bit */ - pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_INTR_SERVICED; - pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_INTR_SERVICED; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief Clear VPM phase alignment timeout interrupt -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(void) -{ - REG_LOCAL_IRQ_SAVE; - /* Clear timeout interrupt service bit */ - pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_INTR_SERVICED; - pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_INTR_SERVICED; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief DDR phase alignment timeout interrupt enable -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptEnable(void) -{ - REG_LOCAL_IRQ_SAVE; - chipcHw_ddrHwPhaseAlignTimeoutInterruptClear(); /* Recommended */ - /* Enable timeout interrupt */ - pChipcHw->DDRPhaseCtrl2 |= chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief VPM phase alignment timeout interrupt enable -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptEnable(void) -{ - REG_LOCAL_IRQ_SAVE; - chipcHw_vpmHwPhaseAlignTimeoutInterruptClear(); /* Recommended */ - /* Enable timeout interrupt */ - pChipcHw->VPMPhaseCtrl2 |= chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief DDR phase alignment timeout interrupt disable -* -*/ -/****************************************************************************/ -static inline void chipcHw_ddrHwPhaseAlignTimeoutInterruptDisable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->DDRPhaseCtrl2 &= ~chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -/****************************************************************************/ -/** -* @brief VPM phase alignment timeout interrupt disable -* -*/ -/****************************************************************************/ -static inline void chipcHw_vpmHwPhaseAlignTimeoutInterruptDisable(void) -{ - REG_LOCAL_IRQ_SAVE; - pChipcHw->VPMPhaseCtrl2 &= ~chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE; - REG_LOCAL_IRQ_RESTORE; -} - -#endif /* CHIPC_INLINE_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h deleted file mode 100644 index b162448f613c969a0bc002df3a8b33c2899eaef3..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/chipcHw_reg.h +++ /dev/null @@ -1,530 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file chipcHw_reg.h -* -* @brief Definitions for low level chip control registers -* -*/ -/****************************************************************************/ -#ifndef CHIPCHW_REG_H -#define CHIPCHW_REG_H - -#include -#include -#include - -#define chipcHw_BASE_ADDRESS MM_IO_BASE_CHIPC - -typedef struct { - uint32_t ChipId; /* Chip ID */ - uint32_t DDRClock; /* PLL1 Channel 1 for DDR clock */ - uint32_t ARMClock; /* PLL1 Channel 2 for ARM clock */ - uint32_t ESWClock; /* PLL1 Channel 3 for ESW system clock */ - uint32_t VPMClock; /* PLL1 Channel 4 for VPM clock */ - uint32_t ESW125Clock; /* PLL1 Channel 5 for ESW 125MHz clock */ - uint32_t UARTClock; /* PLL1 Channel 6 for UART clock */ - uint32_t SDIO0Clock; /* PLL1 Channel 7 for SDIO 0 clock */ - uint32_t SDIO1Clock; /* PLL1 Channel 8 for SDIO 1 clock */ - uint32_t SPIClock; /* PLL1 Channel 9 for SPI master Clock */ - uint32_t ETMClock; /* PLL1 Channel 10 for ARM ETM Clock */ - - uint32_t ACLKClock; /* ACLK Clock (Divider) */ - uint32_t OTPClock; /* OTP Clock (Divider) */ - uint32_t I2CClock; /* I2C Clock (CK_13m) (Divider) */ - uint32_t I2S0Clock; /* I2S0 Clock (Divider) */ - uint32_t RTBUSClock; /* RTBUS (DDR PHY Config.) Clock (Divider) */ - uint32_t pad1; - uint32_t APM100Clock; /* APM 100MHz CLK Clock (Divider) */ - uint32_t TSCClock; /* TSC Clock (Divider) */ - uint32_t LEDClock; /* LED Clock (Divider) */ - - uint32_t USBClock; /* PLL2 Channel 1 for USB clock */ - uint32_t LCDClock; /* PLL2 Channel 2 for LCD clock */ - uint32_t APMClock; /* PLL2 Channel 3 for APM 200 MHz clock */ - - uint32_t BusIntfClock; /* Bus interface clock */ - - uint32_t PLLStatus; /* PLL status register (PLL1) */ - uint32_t PLLConfig; /* PLL configuration register (PLL1) */ - uint32_t PLLPreDivider; /* PLL pre-divider control register (PLL1) */ - uint32_t PLLDivider; /* PLL divider control register (PLL1) */ - uint32_t PLLControl1; /* PLL analog control register #1 (PLL1) */ - uint32_t PLLControl2; /* PLL analog control register #2 (PLL1) */ - - uint32_t I2S1Clock; /* I2S1 Clock */ - uint32_t AudioEnable; /* Enable/ disable audio channel */ - uint32_t SoftReset1; /* Reset blocks */ - uint32_t SoftReset2; /* Reset blocks */ - uint32_t Spare1; /* Phase align interrupts */ - uint32_t Sticky; /* Sticky bits */ - uint32_t MiscCtrl; /* Misc. control */ - uint32_t pad3[3]; - - uint32_t PLLStatus2; /* PLL status register (PLL2) */ - uint32_t PLLConfig2; /* PLL configuration register (PLL2) */ - uint32_t PLLPreDivider2; /* PLL pre-divider control register (PLL2) */ - uint32_t PLLDivider2; /* PLL divider control register (PLL2) */ - uint32_t PLLControl12; /* PLL analog control register #1 (PLL2) */ - uint32_t PLLControl22; /* PLL analog control register #2 (PLL2) */ - - uint32_t DDRPhaseCtrl1; /* DDR Clock Phase Alignment control1 */ - uint32_t VPMPhaseCtrl1; /* VPM Clock Phase Alignment control1 */ - uint32_t PhaseAlignStatus; /* DDR/VPM Clock Phase Alignment Status */ - uint32_t PhaseCtrlStatus; /* DDR/VPM Clock HW DDR/VPM ph_ctrl and load_ch Status */ - uint32_t DDRPhaseCtrl2; /* DDR Clock Phase Alignment control2 */ - uint32_t VPMPhaseCtrl2; /* VPM Clock Phase Alignment control2 */ - uint32_t pad4[9]; - - uint32_t SoftOTP1; /* Software OTP control */ - uint32_t SoftOTP2; /* Software OTP control */ - uint32_t SoftStraps; /* Software strap */ - uint32_t PinStraps; /* Pin Straps */ - uint32_t DiffOscCtrl; /* Diff oscillator control */ - uint32_t DiagsCtrl; /* Diagnostic control */ - uint32_t DiagsOutputCtrl; /* Diagnostic output enable */ - uint32_t DiagsReadBackCtrl; /* Diagnostic read back control */ - - uint32_t LcdPifMode; /* LCD/PIF Pin Sharing MUX Mode */ - - uint32_t GpioMux_0_7; /* Pin Sharing MUX0 Control */ - uint32_t GpioMux_8_15; /* Pin Sharing MUX1 Control */ - uint32_t GpioMux_16_23; /* Pin Sharing MUX2 Control */ - uint32_t GpioMux_24_31; /* Pin Sharing MUX3 Control */ - uint32_t GpioMux_32_39; /* Pin Sharing MUX4 Control */ - uint32_t GpioMux_40_47; /* Pin Sharing MUX5 Control */ - uint32_t GpioMux_48_55; /* Pin Sharing MUX6 Control */ - uint32_t GpioMux_56_63; /* Pin Sharing MUX7 Control */ - - uint32_t GpioSR_0_7; /* Slew rate for GPIO 0 - 7 */ - uint32_t GpioSR_8_15; /* Slew rate for GPIO 8 - 15 */ - uint32_t GpioSR_16_23; /* Slew rate for GPIO 16 - 23 */ - uint32_t GpioSR_24_31; /* Slew rate for GPIO 24 - 31 */ - uint32_t GpioSR_32_39; /* Slew rate for GPIO 32 - 39 */ - uint32_t GpioSR_40_47; /* Slew rate for GPIO 40 - 47 */ - uint32_t GpioSR_48_55; /* Slew rate for GPIO 48 - 55 */ - uint32_t GpioSR_56_63; /* Slew rate for GPIO 56 - 63 */ - uint32_t MiscSR_0_7; /* Slew rate for MISC 0 - 7 */ - uint32_t MiscSR_8_15; /* Slew rate for MISC 8 - 15 */ - - uint32_t GpioPull_0_15; /* Pull up registers for GPIO 0 - 15 */ - uint32_t GpioPull_16_31; /* Pull up registers for GPIO 16 - 31 */ - uint32_t GpioPull_32_47; /* Pull up registers for GPIO 32 - 47 */ - uint32_t GpioPull_48_63; /* Pull up registers for GPIO 48 - 63 */ - uint32_t MiscPull_0_15; /* Pull up registers for MISC 0 - 15 */ - - uint32_t GpioInput_0_31; /* Input type for GPIO 0 - 31 */ - uint32_t GpioInput_32_63; /* Input type for GPIO 32 - 63 */ - uint32_t MiscInput_0_15; /* Input type for MISC 0 - 16 */ -} chipcHw_REG_t; - -#define pChipcHw ((volatile chipcHw_REG_t *) chipcHw_BASE_ADDRESS) -#define pChipcPhysical ((volatile chipcHw_REG_t *) MM_ADDR_IO_CHIPC) - -#define chipcHw_REG_CHIPID_BASE_MASK 0xFFFFF000 -#define chipcHw_REG_CHIPID_BASE_SHIFT 12 -#define chipcHw_REG_CHIPID_REV_MASK 0x00000FFF -#define chipcHw_REG_REV_A0 0xA00 -#define chipcHw_REG_REV_B0 0x0B0 - -#define chipcHw_REG_PLL_STATUS_CONTROL_ENABLE 0x80000000 /* Allow controlling PLL registers */ -#define chipcHw_REG_PLL_STATUS_LOCKED 0x00000001 /* PLL is settled */ -#define chipcHw_REG_PLL_CONFIG_D_RESET 0x00000008 /* Digital reset */ -#define chipcHw_REG_PLL_CONFIG_A_RESET 0x00000004 /* Analog reset */ -#define chipcHw_REG_PLL_CONFIG_BYPASS_ENABLE 0x00000020 /* Bypass enable */ -#define chipcHw_REG_PLL_CONFIG_OUTPUT_ENABLE 0x00000010 /* Output enable */ -#define chipcHw_REG_PLL_CONFIG_POWER_DOWN 0x00000001 /* Power down */ -#define chipcHw_REG_PLL_CONFIG_VCO_SPLIT_FREQ 1600000000 /* 1.6GHz VCO split frequency */ -#define chipcHw_REG_PLL_CONFIG_VCO_800_1600 0x00000000 /* VCO range 800-1600 MHz */ -#define chipcHw_REG_PLL_CONFIG_VCO_1601_3200 0x00000080 /* VCO range 1601-3200 MHz */ -#define chipcHw_REG_PLL_CONFIG_TEST_ENABLE 0x00010000 /* PLL test output enable */ -#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_MASK 0x003E0000 /* Mask to set test values */ -#define chipcHw_REG_PLL_CONFIG_TEST_SELECT_SHIFT 17 - -#define chipcHw_REG_PLL_CLOCK_PHASE_COMP 0x00800000 /* Phase comparator output */ -#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_MASK 0x00300000 /* Clock to bus ratio mask */ -#define chipcHw_REG_PLL_CLOCK_TO_BUS_RATIO_SHIFT 20 /* Number of bits to be shifted */ -#define chipcHw_REG_PLL_CLOCK_POWER_DOWN 0x00080000 /* PLL channel power down */ -#define chipcHw_REG_PLL_CLOCK_SOURCE_GPIO 0x00040000 /* Use GPIO as source */ -#define chipcHw_REG_PLL_CLOCK_BYPASS_SELECT 0x00020000 /* Select bypass clock */ -#define chipcHw_REG_PLL_CLOCK_OUTPUT_ENABLE 0x00010000 /* Clock gated ON */ -#define chipcHw_REG_PLL_CLOCK_PHASE_UPDATE_ENABLE 0x00008000 /* Clock phase update enable */ -#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_SHIFT 8 /* Number of bits to be shifted */ -#define chipcHw_REG_PLL_CLOCK_PHASE_CONTROL_MASK 0x00003F00 /* Phase control mask */ -#define chipcHw_REG_PLL_CLOCK_MDIV_MASK 0x000000FF /* Clock post divider mask - - 00000000 = divide-by-256 - 00000001 = divide-by-1 - 00000010 = divide-by-2 - 00000011 = divide-by-3 - 00000100 = divide-by-4 - 00000101 = divide-by-5 - 00000110 = divide-by-6 - . - . - 11111011 = divide-by-251 - 11111100 = divide-by-252 - 11111101 = divide-by-253 - 11111110 = divide-by-254 - */ - -#define chipcHw_REG_DIV_CLOCK_SOURCE_OTHER 0x00040000 /* NON-PLL clock source select */ -#define chipcHw_REG_DIV_CLOCK_BYPASS_SELECT 0x00020000 /* NON-PLL clock bypass enable */ -#define chipcHw_REG_DIV_CLOCK_OUTPUT_ENABLE 0x00010000 /* NON-PLL clock output enable */ -#define chipcHw_REG_DIV_CLOCK_DIV_MASK 0x000000FF /* NON-PLL clock post-divide mask */ -#define chipcHw_REG_DIV_CLOCK_DIV_256 0x00000000 /* NON-PLL clock post-divide by 256 */ - -#define chipcHw_REG_PLL_PREDIVIDER_P1_SHIFT 0 -#define chipcHw_REG_PLL_PREDIVIDER_P2_SHIFT 4 -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_SHIFT 8 -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MASK 0x0001FF00 -#define chipcHw_REG_PLL_PREDIVIDER_POWER_DOWN 0x02000000 -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASK 0x00700000 /* Divider mask */ -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_INTEGER 0x00000000 /* Integer-N Mode */ -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_UNIT 0x00100000 /* MASH Sigma-Delta Modulator Unit Mode */ -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_UNIT 0x00200000 /* MFB Sigma-Delta Modulator Unit Mode */ -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MASH_1_8 0x00300000 /* MASH Sigma-Delta Modulator 1/8 Mode */ -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_MODE_MFB_1_8 0x00400000 /* MFB Sigma-Delta Modulator 1/8 Mode */ - -#define chipcHw_REG_PLL_PREDIVIDER_NDIV_i(vco) ((vco) / chipcHw_XTAL_FREQ_Hz) -#define chipcHw_REG_PLL_PREDIVIDER_P1 1 -#define chipcHw_REG_PLL_PREDIVIDER_P2 1 - -#define chipcHw_REG_PLL_DIVIDER_M1DIV 0x03000000 -#define chipcHw_REG_PLL_DIVIDER_FRAC 0x00FFFFFF /* Fractional divider */ - -#define chipcHw_REG_PLL_DIVIDER_NDIV_f_SS (0x00FFFFFF) /* To attain spread with max frequency */ - -#define chipcHw_REG_PLL_DIVIDER_NDIV_f 0 /* ndiv_frac = chipcHw_REG_PLL_DIVIDER_NDIV_f / - chipcHw_REG_PLL_DIVIDER_FRAC - = 0, when SS is disable - */ - -#define chipcHw_REG_PLL_DIVIDER_MDIV(vco, Hz) ((chipcHw_divide((vco), (Hz)) > 255) ? 0 : chipcHw_divide((vco), (Hz))) - -#define chipcHw_REG_ACLKClock_CLK_DIV_MASK 0x3 - -/* System booting strap options */ -#define chipcHw_STRAPS_SOFT_OVERRIDE 0x00000001 /* Software Strap Override */ - -#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_8 0x00000000 /* 8 bit NAND FLASH Boot */ -#define chipcHw_STRAPS_BOOT_DEVICE_NOR_FLASH_16 0x00000002 /* 16 bit NOR FLASH Boot */ -#define chipcHw_STRAPS_BOOT_DEVICE_SERIAL_FLASH 0x00000004 /* Serial FLASH Boot */ -#define chipcHw_STRAPS_BOOT_DEVICE_NAND_FLASH_16 0x00000006 /* 16 bit NAND FLASH Boot */ -#define chipcHw_STRAPS_BOOT_DEVICE_UART 0x00000008 /* UART Boot */ -#define chipcHw_STRAPS_BOOT_DEVICE_MASK 0x0000000E /* Mask */ - -/* System boot option */ -#define chipcHw_STRAPS_BOOT_OPTION_BROM 0x00000000 /* Boot from Boot ROM */ -#define chipcHw_STRAPS_BOOT_OPTION_ARAM 0x00000020 /* Boot from ARAM */ -#define chipcHw_STRAPS_BOOT_OPTION_NOR 0x00000030 /* Boot from NOR flash */ - -/* NAND Flash page size strap options */ -#define chipcHw_STRAPS_NAND_PAGESIZE_512 0x00000000 /* NAND FLASH page size of 512 bytes */ -#define chipcHw_STRAPS_NAND_PAGESIZE_2048 0x00000040 /* NAND FLASH page size of 2048 bytes */ -#define chipcHw_STRAPS_NAND_PAGESIZE_4096 0x00000080 /* NAND FLASH page size of 4096 bytes */ -#define chipcHw_STRAPS_NAND_PAGESIZE_EXT 0x000000C0 /* NAND FLASH page of extened size */ -#define chipcHw_STRAPS_NAND_PAGESIZE_MASK 0x000000C0 /* Mask */ - -#define chipcHw_STRAPS_NAND_EXTRA_CYCLE 0x00000400 /* NAND FLASH address cycle configuration */ -#define chipcHw_STRAPS_REBOOT_TO_UART 0x00000800 /* Reboot to UART on error */ - -/* Secure boot mode strap options */ -#define chipcHw_STRAPS_BOOT_MODE_NORMAL 0x00000000 /* Normal Boot */ -#define chipcHw_STRAPS_BOOT_MODE_DBG_SW 0x00000100 /* Software debugging Boot */ -#define chipcHw_STRAPS_BOOT_MODE_DBG_BOOT 0x00000200 /* Boot rom debugging Boot */ -#define chipcHw_STRAPS_BOOT_MODE_NORMAL_QUIET 0x00000300 /* Normal Boot (Quiet BootRom) */ -#define chipcHw_STRAPS_BOOT_MODE_MASK 0x00000300 /* Mask */ - -/* Slave Mode straps */ -#define chipcHw_STRAPS_I2CS 0x02000000 /* I2C Slave */ -#define chipcHw_STRAPS_SPIS 0x01000000 /* SPI Slave */ - -/* Strap pin options */ -#define chipcHw_REG_SW_STRAPS ((pChipcHw->PinStraps & 0x0000FC00) >> 10) - -/* PIF/LCD pin sharing defines */ -#define chipcHw_REG_LCD_PIN_ENABLE 0x00000001 /* LCD Controller is used and the pins have LCD functions */ -#define chipcHw_REG_PIF_PIN_ENABLE 0x00000002 /* LCD pins are used to perform PIF functions */ - -#define chipcHw_GPIO_COUNT 61 /* Number of GPIO pin accessible thorugh CHIPC */ - -/* NOTE: Any changes to these constants will require a corresponding change to chipcHw_str.c */ -#define chipcHw_REG_GPIO_MUX_KEYPAD 0x00000001 /* GPIO mux for Keypad */ -#define chipcHw_REG_GPIO_MUX_I2CH 0x00000002 /* GPIO mux for I2CH */ -#define chipcHw_REG_GPIO_MUX_SPI 0x00000003 /* GPIO mux for SPI */ -#define chipcHw_REG_GPIO_MUX_UART 0x00000004 /* GPIO mux for UART */ -#define chipcHw_REG_GPIO_MUX_LEDMTXP 0x00000005 /* GPIO mux for LEDMTXP */ -#define chipcHw_REG_GPIO_MUX_LEDMTXS 0x00000006 /* GPIO mux for LEDMTXS */ -#define chipcHw_REG_GPIO_MUX_SDIO0 0x00000007 /* GPIO mux for SDIO0 */ -#define chipcHw_REG_GPIO_MUX_SDIO1 0x00000008 /* GPIO mux for SDIO1 */ -#define chipcHw_REG_GPIO_MUX_PCM 0x00000009 /* GPIO mux for PCM */ -#define chipcHw_REG_GPIO_MUX_I2S 0x0000000A /* GPIO mux for I2S */ -#define chipcHw_REG_GPIO_MUX_ETM 0x0000000B /* GPIO mux for ETM */ -#define chipcHw_REG_GPIO_MUX_DEBUG 0x0000000C /* GPIO mux for DEBUG */ -#define chipcHw_REG_GPIO_MUX_MISC 0x0000000D /* GPIO mux for MISC */ -#define chipcHw_REG_GPIO_MUX_GPIO 0x00000000 /* GPIO mux for GPIO */ -#define chipcHw_REG_GPIO_MUX(pin) (&pChipcHw->GpioMux_0_7 + ((pin) >> 3)) -#define chipcHw_REG_GPIO_MUX_POSITION(pin) (((pin) & 0x00000007) << 2) -#define chipcHw_REG_GPIO_MUX_MASK 0x0000000F /* Mask */ - -#define chipcHw_REG_SLEW_RATE_HIGH 0x00000000 /* High speed slew rate */ -#define chipcHw_REG_SLEW_RATE_NORMAL 0x00000008 /* Normal slew rate */ - /* Pins beyond 42 are defined by skipping 8 bits within the register */ -#define chipcHw_REG_SLEW_RATE(pin) (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3))) -#define chipcHw_REG_SLEW_RATE_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2)) -#define chipcHw_REG_SLEW_RATE_MASK 0x00000008 /* Mask */ - -#define chipcHw_REG_CURRENT_STRENGTH_2mA 0x00000001 /* Current driving strength 2 milli ampere */ -#define chipcHw_REG_CURRENT_STRENGTH_4mA 0x00000002 /* Current driving strength 4 milli ampere */ -#define chipcHw_REG_CURRENT_STRENGTH_6mA 0x00000004 /* Current driving strength 6 milli ampere */ -#define chipcHw_REG_CURRENT_STRENGTH_8mA 0x00000005 /* Current driving strength 8 milli ampere */ -#define chipcHw_REG_CURRENT_STRENGTH_10mA 0x00000006 /* Current driving strength 10 milli ampere */ -#define chipcHw_REG_CURRENT_STRENGTH_12mA 0x00000007 /* Current driving strength 12 milli ampere */ -#define chipcHw_REG_CURRENT_MASK 0x00000007 /* Mask */ - /* Pins beyond 42 are defined by skipping 8 bits */ -#define chipcHw_REG_CURRENT(pin) (((pin) > 42) ? (&pChipcHw->GpioSR_0_7 + (((pin) + 2) >> 3)) : (&pChipcHw->GpioSR_0_7 + ((pin) >> 3))) -#define chipcHw_REG_CURRENT_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x00000007) << 2) : (((pin) & 0x00000007) << 2)) - -#define chipcHw_REG_PULL_NONE 0x00000000 /* No pull up register */ -#define chipcHw_REG_PULL_UP 0x00000001 /* Pull up register enable */ -#define chipcHw_REG_PULL_DOWN 0x00000002 /* Pull down register enable */ -#define chipcHw_REG_PULLUP_MASK 0x00000003 /* Mask */ - /* Pins beyond 42 are defined by skipping 4 bits */ -#define chipcHw_REG_PULLUP(pin) (((pin) > 42) ? (&pChipcHw->GpioPull_0_15 + (((pin) + 2) >> 4)) : (&pChipcHw->GpioPull_0_15 + ((pin) >> 4))) -#define chipcHw_REG_PULLUP_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x0000000F) << 1) : (((pin) & 0x0000000F) << 1)) - -#define chipcHw_REG_INPUTTYPE_CMOS 0x00000000 /* Normal CMOS logic */ -#define chipcHw_REG_INPUTTYPE_ST 0x00000001 /* High speed Schmitt Trigger */ -#define chipcHw_REG_INPUTTYPE_MASK 0x00000001 /* Mask */ - /* Pins beyond 42 are defined by skipping 2 bits */ -#define chipcHw_REG_INPUTTYPE(pin) (((pin) > 42) ? (&pChipcHw->GpioInput_0_31 + (((pin) + 2) >> 5)) : (&pChipcHw->GpioInput_0_31 + ((pin) >> 5))) -#define chipcHw_REG_INPUTTYPE_POSITION(pin) (((pin) > 42) ? ((((pin) + 2) & 0x0000001F)) : (((pin) & 0x0000001F))) - -/* Device connected to the bus clock */ -#define chipcHw_REG_BUS_CLOCK_ARM 0x00000001 /* Bus interface clock for ARM */ -#define chipcHw_REG_BUS_CLOCK_VDEC 0x00000002 /* Bus interface clock for VDEC */ -#define chipcHw_REG_BUS_CLOCK_ARAM 0x00000004 /* Bus interface clock for ARAM */ -#define chipcHw_REG_BUS_CLOCK_HPM 0x00000008 /* Bus interface clock for HPM */ -#define chipcHw_REG_BUS_CLOCK_DDRC 0x00000010 /* Bus interface clock for DDRC */ -#define chipcHw_REG_BUS_CLOCK_DMAC0 0x00000020 /* Bus interface clock for DMAC0 */ -#define chipcHw_REG_BUS_CLOCK_DMAC1 0x00000040 /* Bus interface clock for DMAC1 */ -#define chipcHw_REG_BUS_CLOCK_NVI 0x00000080 /* Bus interface clock for NVI */ -#define chipcHw_REG_BUS_CLOCK_ESW 0x00000100 /* Bus interface clock for ESW */ -#define chipcHw_REG_BUS_CLOCK_GE 0x00000200 /* Bus interface clock for GE */ -#define chipcHw_REG_BUS_CLOCK_I2CH 0x00000400 /* Bus interface clock for I2CH */ -#define chipcHw_REG_BUS_CLOCK_I2S0 0x00000800 /* Bus interface clock for I2S0 */ -#define chipcHw_REG_BUS_CLOCK_I2S1 0x00001000 /* Bus interface clock for I2S1 */ -#define chipcHw_REG_BUS_CLOCK_VRAM 0x00002000 /* Bus interface clock for VRAM */ -#define chipcHw_REG_BUS_CLOCK_CLCD 0x00004000 /* Bus interface clock for CLCD */ -#define chipcHw_REG_BUS_CLOCK_LDK 0x00008000 /* Bus interface clock for LDK */ -#define chipcHw_REG_BUS_CLOCK_LED 0x00010000 /* Bus interface clock for LED */ -#define chipcHw_REG_BUS_CLOCK_OTP 0x00020000 /* Bus interface clock for OTP */ -#define chipcHw_REG_BUS_CLOCK_PIF 0x00040000 /* Bus interface clock for PIF */ -#define chipcHw_REG_BUS_CLOCK_SPU 0x00080000 /* Bus interface clock for SPU */ -#define chipcHw_REG_BUS_CLOCK_SDIO0 0x00100000 /* Bus interface clock for SDIO0 */ -#define chipcHw_REG_BUS_CLOCK_SDIO1 0x00200000 /* Bus interface clock for SDIO1 */ -#define chipcHw_REG_BUS_CLOCK_SPIH 0x00400000 /* Bus interface clock for SPIH */ -#define chipcHw_REG_BUS_CLOCK_SPIS 0x00800000 /* Bus interface clock for SPIS */ -#define chipcHw_REG_BUS_CLOCK_UART0 0x01000000 /* Bus interface clock for UART0 */ -#define chipcHw_REG_BUS_CLOCK_UART1 0x02000000 /* Bus interface clock for UART1 */ -#define chipcHw_REG_BUS_CLOCK_BBL 0x04000000 /* Bus interface clock for BBL */ -#define chipcHw_REG_BUS_CLOCK_I2CS 0x08000000 /* Bus interface clock for I2CS */ -#define chipcHw_REG_BUS_CLOCK_USBH 0x10000000 /* Bus interface clock for USB Host */ -#define chipcHw_REG_BUS_CLOCK_USBD 0x20000000 /* Bus interface clock for USB Device */ -#define chipcHw_REG_BUS_CLOCK_BROM 0x40000000 /* Bus interface clock for Boot ROM */ -#define chipcHw_REG_BUS_CLOCK_TSC 0x80000000 /* Bus interface clock for Touch screen */ - -/* Software resets defines */ -#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_HOLD 0x0000000080000000ULL /* Reset Global VPM and hold */ -#define chipcHw_REG_SOFT_RESET_VPM_HOLD 0x0000000040000000ULL /* Reset VPM and hold */ -#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL 0x0000000020000000ULL /* Reset Global VPM */ -#define chipcHw_REG_SOFT_RESET_VPM 0x0000000010000000ULL /* Reset VPM */ -#define chipcHw_REG_SOFT_RESET_KEYPAD 0x0000000008000000ULL /* Reset Key pad */ -#define chipcHw_REG_SOFT_RESET_LED 0x0000000004000000ULL /* Reset LED */ -#define chipcHw_REG_SOFT_RESET_SPU 0x0000000002000000ULL /* Reset SPU */ -#define chipcHw_REG_SOFT_RESET_RNG 0x0000000001000000ULL /* Reset RNG */ -#define chipcHw_REG_SOFT_RESET_PKA 0x0000000000800000ULL /* Reset PKA */ -#define chipcHw_REG_SOFT_RESET_LCD 0x0000000000400000ULL /* Reset LCD */ -#define chipcHw_REG_SOFT_RESET_PIF 0x0000000000200000ULL /* Reset PIF */ -#define chipcHw_REG_SOFT_RESET_I2CS 0x0000000000100000ULL /* Reset I2C Slave */ -#define chipcHw_REG_SOFT_RESET_I2CH 0x0000000000080000ULL /* Reset I2C Host */ -#define chipcHw_REG_SOFT_RESET_SDIO1 0x0000000000040000ULL /* Reset SDIO 1 */ -#define chipcHw_REG_SOFT_RESET_SDIO0 0x0000000000020000ULL /* Reset SDIO 0 */ -#define chipcHw_REG_SOFT_RESET_BBL 0x0000000000010000ULL /* Reset BBL */ -#define chipcHw_REG_SOFT_RESET_I2S1 0x0000000000008000ULL /* Reset I2S1 */ -#define chipcHw_REG_SOFT_RESET_I2S0 0x0000000000004000ULL /* Reset I2S0 */ -#define chipcHw_REG_SOFT_RESET_SPIS 0x0000000000002000ULL /* Reset SPI Slave */ -#define chipcHw_REG_SOFT_RESET_SPIH 0x0000000000001000ULL /* Reset SPI Host */ -#define chipcHw_REG_SOFT_RESET_GPIO1 0x0000000000000800ULL /* Reset GPIO block 1 */ -#define chipcHw_REG_SOFT_RESET_GPIO0 0x0000000000000400ULL /* Reset GPIO block 0 */ -#define chipcHw_REG_SOFT_RESET_UART1 0x0000000000000200ULL /* Reset UART 1 */ -#define chipcHw_REG_SOFT_RESET_UART0 0x0000000000000100ULL /* Reset UART 0 */ -#define chipcHw_REG_SOFT_RESET_NVI 0x0000000000000080ULL /* Reset NVI */ -#define chipcHw_REG_SOFT_RESET_WDOG 0x0000000000000040ULL /* Reset Watch dog */ -#define chipcHw_REG_SOFT_RESET_TMR 0x0000000000000020ULL /* Reset Timer */ -#define chipcHw_REG_SOFT_RESET_ETM 0x0000000000000010ULL /* Reset ETM */ -#define chipcHw_REG_SOFT_RESET_ARM_HOLD 0x0000000000000008ULL /* Reset ARM and HOLD */ -#define chipcHw_REG_SOFT_RESET_ARM 0x0000000000000004ULL /* Reset ARM */ -#define chipcHw_REG_SOFT_RESET_CHIP_WARM 0x0000000000000002ULL /* Chip warm reset */ -#define chipcHw_REG_SOFT_RESET_CHIP_SOFT 0x0000000000000001ULL /* Chip soft reset */ -#define chipcHw_REG_SOFT_RESET_VDEC 0x0000100000000000ULL /* Video decoder */ -#define chipcHw_REG_SOFT_RESET_GE 0x0000080000000000ULL /* Graphics engine */ -#define chipcHw_REG_SOFT_RESET_OTP 0x0000040000000000ULL /* Reset OTP */ -#define chipcHw_REG_SOFT_RESET_USB2 0x0000020000000000ULL /* Reset USB2 */ -#define chipcHw_REG_SOFT_RESET_USB1 0x0000010000000000ULL /* Reset USB 1 */ -#define chipcHw_REG_SOFT_RESET_USB 0x0000008000000000ULL /* Reset USB 1 and USB2 soft reset */ -#define chipcHw_REG_SOFT_RESET_ESW 0x0000004000000000ULL /* Reset Ethernet switch */ -#define chipcHw_REG_SOFT_RESET_ESWCLK 0x0000002000000000ULL /* Reset Ethernet switch clock */ -#define chipcHw_REG_SOFT_RESET_DDRPHY 0x0000001000000000ULL /* Reset DDR Physical */ -#define chipcHw_REG_SOFT_RESET_DDR 0x0000000800000000ULL /* Reset DDR Controller */ -#define chipcHw_REG_SOFT_RESET_TSC 0x0000000400000000ULL /* Reset Touch screen */ -#define chipcHw_REG_SOFT_RESET_PCM 0x0000000200000000ULL /* Reset PCM device */ -#define chipcHw_REG_SOFT_RESET_APM 0x0000200100000000ULL /* Reset APM device */ - -#define chipcHw_REG_SOFT_RESET_VPM_GLOBAL_UNHOLD 0x8000000000000000ULL /* Unhold Global VPM */ -#define chipcHw_REG_SOFT_RESET_VPM_UNHOLD 0x4000000000000000ULL /* Unhold VPM */ -#define chipcHw_REG_SOFT_RESET_ARM_UNHOLD 0x2000000000000000ULL /* Unhold ARM reset */ -#define chipcHw_REG_SOFT_RESET_UNHOLD_MASK 0xF000000000000000ULL /* Mask to handle unhold request */ - -/* Audio channel control defines */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_ALL 0x00000001 /* Enable all audio channel */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_A 0x00000002 /* Enable channel A */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_B 0x00000004 /* Enable channel B */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_C 0x00000008 /* Enable channel C */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_NTP_CLOCK 0x00000010 /* Enable NTP clock */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM0_CLOCK 0x00000020 /* Enable PCM0 clock */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_PCM1_CLOCK 0x00000040 /* Enable PCM1 clock */ -#define chipcHw_REG_AUDIO_CHANNEL_ENABLE_APM_CLOCK 0x00000080 /* Enable APM clock */ - -/* Misc. chip control defines */ -#define chipcHw_REG_MISC_CTRL_GE_SEL 0x00040000 /* Select GE2/GE3 */ -#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_ONCHIP 0x00000000 /* Use on chip clock for I2S1 */ -#define chipcHw_REG_MISC_CTRL_I2S1_CLOCK_GPIO 0x00020000 /* Use external clock via GPIO pin 26 for I2S1 */ -#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_ONCHIP 0x00000000 /* Use on chip clock for I2S0 */ -#define chipcHw_REG_MISC_CTRL_I2S0_CLOCK_GPIO 0x00010000 /* Use external clock via GPIO pin 45 for I2S0 */ -#define chipcHw_REG_MISC_CTRL_ARM_CP15_DISABLE 0x00008000 /* Disable ARM CP15 bit */ -#define chipcHw_REG_MISC_CTRL_RTC_DISABLE 0x00000008 /* Disable RTC registers */ -#define chipcHw_REG_MISC_CTRL_BBRAM_DISABLE 0x00000004 /* Disable Battery Backed RAM */ -#define chipcHw_REG_MISC_CTRL_USB_MODE_HOST 0x00000002 /* Set USB as host */ -#define chipcHw_REG_MISC_CTRL_USB_MODE_DEVICE 0xFFFFFFFD /* Set USB as device */ -#define chipcHw_REG_MISC_CTRL_USB_POWERON 0xFFFFFFFE /* Power up USB */ -#define chipcHw_REG_MISC_CTRL_USB_POWEROFF 0x00000001 /* Power down USB */ - -/* OTP configuration defines */ -#define chipcHw_REG_OTP_SECURITY_OFF 0x0000020000000000ULL /* Security support is OFF */ -#define chipcHw_REG_OTP_SPU_SLOW 0x0000010000000000ULL /* Limited SPU throughput */ -#define chipcHw_REG_OTP_LCD_SPEED 0x0000000600000000ULL /* Set VPM speed one */ -#define chipcHw_REG_OTP_VPM_SPEED_1 0x0000000100000000ULL /* Set VPM speed one */ -#define chipcHw_REG_OTP_VPM_SPEED_0 0x0000000080000000ULL /* Set VPM speed zero */ -#define chipcHw_REG_OTP_AXI_SPEED 0x0000000060000000ULL /* Set maximum AXI bus speed */ -#define chipcHw_REG_OTP_APM_DISABLE 0x000000001F000000ULL /* Disable APM */ -#define chipcHw_REG_OTP_PIF_DISABLE 0x0000000000200000ULL /* Disable PIF */ -#define chipcHw_REG_OTP_VDEC_DISABLE 0x0000000000100000ULL /* Disable Video decoder */ -#define chipcHw_REG_OTP_BBL_DISABLE 0x0000000000080000ULL /* Disable RTC and BBRAM */ -#define chipcHw_REG_OTP_LED_DISABLE 0x0000000000040000ULL /* Disable LED */ -#define chipcHw_REG_OTP_GE_DISABLE 0x0000000000020000ULL /* Disable Graphics Engine */ -#define chipcHw_REG_OTP_LCD_DISABLE 0x0000000000010000ULL /* Disable LCD */ -#define chipcHw_REG_OTP_KEYPAD_DISABLE 0x0000000000008000ULL /* Disable keypad */ -#define chipcHw_REG_OTP_UART_DISABLE 0x0000000000004000ULL /* Disable UART */ -#define chipcHw_REG_OTP_SDIOH_DISABLE 0x0000000000003000ULL /* Disable SDIO host */ -#define chipcHw_REG_OTP_HSS_DISABLE 0x0000000000000C00ULL /* Disable HSS */ -#define chipcHw_REG_OTP_TSC_DISABLE 0x0000000000000200ULL /* Disable touch screen */ -#define chipcHw_REG_OTP_USB_DISABLE 0x0000000000000180ULL /* Disable USB */ -#define chipcHw_REG_OTP_SGMII_DISABLE 0x0000000000000060ULL /* Disable SGMII */ -#define chipcHw_REG_OTP_ETH_DISABLE 0x0000000000000018ULL /* Disable gigabit ethernet */ -#define chipcHw_REG_OTP_ETH_PHY_DISABLE 0x0000000000000006ULL /* Disable ethernet PHY */ -#define chipcHw_REG_OTP_VPM_DISABLE 0x0000000000000001ULL /* Disable VPM */ - -/* Sticky bit defines */ -#define chipcHw_REG_STICKY_BOOT_DONE 0x00000001 /* Boot done */ -#define chipcHw_REG_STICKY_SOFT_RESET 0x00000002 /* ARM soft reset */ -#define chipcHw_REG_STICKY_GENERAL_1 0x00000004 /* General purpose bit 1 */ -#define chipcHw_REG_STICKY_GENERAL_2 0x00000008 /* General purpose bit 2 */ -#define chipcHw_REG_STICKY_GENERAL_3 0x00000010 /* General purpose bit 3 */ -#define chipcHw_REG_STICKY_GENERAL_4 0x00000020 /* General purpose bit 4 */ -#define chipcHw_REG_STICKY_GENERAL_5 0x00000040 /* General purpose bit 5 */ -#define chipcHw_REG_STICKY_POR_BROM 0x00000080 /* Special sticky bit for security - set in BROM to avoid other modes being entered */ -#define chipcHw_REG_STICKY_ARM_RESET 0x00000100 /* ARM reset */ -#define chipcHw_REG_STICKY_CHIP_SOFT_RESET 0x00000200 /* Chip soft reset */ -#define chipcHw_REG_STICKY_CHIP_WARM_RESET 0x00000400 /* Chip warm reset */ -#define chipcHw_REG_STICKY_WDOG_RESET 0x00000800 /* Watchdog reset */ -#define chipcHw_REG_STICKY_OTP_RESET 0x00001000 /* OTP reset */ - - /* HW phase alignment defines *//* Spare1 register definitions */ -#define chipcHw_REG_SPARE1_DDR_PHASE_INTR_ENABLE 0x80000000 /* Enable DDR phase align panic interrupt */ -#define chipcHw_REG_SPARE1_VPM_PHASE_INTR_ENABLE 0x40000000 /* Enable VPM phase align panic interrupt */ -#define chipcHw_REG_SPARE1_VPM_BUS_ACCESS_ENABLE 0x00000002 /* Enable access to VPM using system BUS */ -#define chipcHw_REG_SPARE1_DDR_BUS_ACCESS_ENABLE 0x00000001 /* Enable access to DDR using system BUS */ - /* DDRPhaseCtrl1 register definitions */ -#define chipcHw_REG_DDR_SW_PHASE_CTRL_ENABLE 0x80000000 /* Enable DDR SW phase alignment */ -#define chipcHw_REG_DDR_HW_PHASE_CTRL_ENABLE 0x40000000 /* Enable DDR HW phase alignment */ -#define chipcHw_REG_DDR_PHASE_VALUE_GE_MASK 0x0000007F /* DDR lower threshold for phase alignment */ -#define chipcHw_REG_DDR_PHASE_VALUE_GE_SHIFT 23 -#define chipcHw_REG_DDR_PHASE_VALUE_LE_MASK 0x0000007F /* DDR upper threshold for phase alignment */ -#define chipcHw_REG_DDR_PHASE_VALUE_LE_SHIFT 16 -#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_MASK 0x0000FFFF /* BUS Cycle to wait to run next DDR phase alignment */ -#define chipcHw_REG_DDR_PHASE_ALIGN_WAIT_CYCLE_SHIFT 0 - /* VPMPhaseCtrl1 register definitions */ -#define chipcHw_REG_VPM_SW_PHASE_CTRL_ENABLE 0x80000000 /* Enable VPM SW phase alignment */ -#define chipcHw_REG_VPM_HW_PHASE_CTRL_ENABLE 0x40000000 /* Enable VPM HW phase alignment */ -#define chipcHw_REG_VPM_PHASE_VALUE_GE_MASK 0x0000007F /* VPM lower threshold for phase alignment */ -#define chipcHw_REG_VPM_PHASE_VALUE_GE_SHIFT 23 -#define chipcHw_REG_VPM_PHASE_VALUE_LE_MASK 0x0000007F /* VPM upper threshold for phase alignment */ -#define chipcHw_REG_VPM_PHASE_VALUE_LE_SHIFT 16 -#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_MASK 0x0000FFFF /* BUS Cycle to wait to complete the VPM phase alignment */ -#define chipcHw_REG_VPM_PHASE_ALIGN_WAIT_CYCLE_SHIFT 0 - /* PhaseAlignStatus register definitions */ -#define chipcHw_REG_DDR_TIMEOUT_INTR_STATUS 0x80000000 /* DDR time out interrupt status */ -#define chipcHw_REG_DDR_PHASE_STATUS_MASK 0x0000007F /* DDR phase status value */ -#define chipcHw_REG_DDR_PHASE_STATUS_SHIFT 24 -#define chipcHw_REG_DDR_PHASE_ALIGNED 0x00800000 /* DDR Phase aligned status */ -#define chipcHw_REG_DDR_LOAD 0x00400000 /* Load DDR phase status */ -#define chipcHw_REG_DDR_PHASE_CTRL_MASK 0x0000003F /* DDR phase control value */ -#define chipcHw_REG_DDR_PHASE_CTRL_SHIFT 16 -#define chipcHw_REG_VPM_TIMEOUT_INTR_STATUS 0x80000000 /* VPM time out interrupt status */ -#define chipcHw_REG_VPM_PHASE_STATUS_MASK 0x0000007F /* VPM phase status value */ -#define chipcHw_REG_VPM_PHASE_STATUS_SHIFT 8 -#define chipcHw_REG_VPM_PHASE_ALIGNED 0x00000080 /* VPM Phase aligned status */ -#define chipcHw_REG_VPM_LOAD 0x00000040 /* Load VPM phase status */ -#define chipcHw_REG_VPM_PHASE_CTRL_MASK 0x0000003F /* VPM phase control value */ -#define chipcHw_REG_VPM_PHASE_CTRL_SHIFT 0 - /* DDRPhaseCtrl2 register definitions */ -#define chipcHw_REG_DDR_INTR_SERVICED 0x02000000 /* Acknowledge that interrupt was serviced */ -#define chipcHw_REG_DDR_TIMEOUT_INTR_ENABLE 0x01000000 /* Enable time out interrupt */ -#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_MASK 0x0000000F /* Wait before toggling load_ch */ -#define chipcHw_REG_DDR_LOAD_COUNT_PHASE_CTRL_SHIFT 20 -#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_MASK 0x0000000F /* Total wait to settle ph_ctrl and load_ch */ -#define chipcHw_REG_DDR_TOTAL_LOAD_COUNT_CTRL_SHIFT 16 -#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_MASK 0x0000FFFF /* Time out value for DDR HW phase alignment */ -#define chipcHw_REG_DDR_PHASE_TIMEOUT_COUNT_SHIFT 0 - /* VPMPhaseCtrl2 register definitions */ -#define chipcHw_REG_VPM_INTR_SELECT_MASK 0x00000003 /* Interrupt select */ -#define chipcHw_REG_VPM_INTR_SELECT_SHIFT 26 -#define chipcHw_REG_VPM_INTR_DISABLE 0x00000000 -#define chipcHw_REG_VPM_INTR_FAST (0x1 << chipcHw_REG_VPM_INTR_SELECT_SHIFT) -#define chipcHw_REG_VPM_INTR_MEDIUM (0x2 << chipcHw_REG_VPM_INTR_SELECT_SHIFT) -#define chipcHw_REG_VPM_INTR_SLOW (0x3 << chipcHw_REG_VPM_INTR_SELECT_SHIFT) -#define chipcHw_REG_VPM_INTR_SERVICED 0x02000000 /* Acknowledge that interrupt was serviced */ -#define chipcHw_REG_VPM_TIMEOUT_INTR_ENABLE 0x01000000 /* Enable time out interrupt */ -#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_MASK 0x0000000F /* Wait before toggling load_ch */ -#define chipcHw_REG_VPM_LOAD_COUNT_PHASE_CTRL_SHIFT 20 -#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_MASK 0x0000000F /* Total wait cycle to settle ph_ctrl and load_ch */ -#define chipcHw_REG_VPM_TOTAL_LOAD_COUNT_CTRL_SHIFT 16 -#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_MASK 0x0000FFFF /* Time out value for VPM HW phase alignment */ -#define chipcHw_REG_VPM_PHASE_TIMEOUT_COUNT_SHIFT 0 - -#endif /* CHIPCHW_REG_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h b/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h deleted file mode 100644 index f1b68e26fa6dec7ec7b06f0c5bb654f149244243..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/ddrcReg.h +++ /dev/null @@ -1,872 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file ddrcReg.h -* -* @brief Register definitions for BCMRING DDR2 Controller and PHY -* -*/ -/****************************************************************************/ - -#ifndef DDRC_REG_H -#define DDRC_REG_H - -#ifdef __cplusplus -extern "C" { -#endif - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include - -#include - -/* ---- Public Constants and Types --------------------------------------- */ - -/*********************************************************************/ -/* DDR2 Controller (ARM PL341) register definitions */ -/*********************************************************************/ - -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ -/* ARM PL341 DDR2 configuration registers, offset 0x000 */ -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ - - typedef struct { - uint32_t memcStatus; - uint32_t memcCmd; - uint32_t directCmd; - uint32_t memoryCfg; - uint32_t refreshPrd; - uint32_t casLatency; - uint32_t writeLatency; - uint32_t tMrd; - uint32_t tRas; - uint32_t tRc; - uint32_t tRcd; - uint32_t tRfc; - uint32_t tRp; - uint32_t tRrd; - uint32_t tWr; - uint32_t tWtr; - uint32_t tXp; - uint32_t tXsr; - uint32_t tEsr; - uint32_t memoryCfg2; - uint32_t memoryCfg3; - uint32_t tFaw; - } ddrcReg_CTLR_MEMC_REG_t; - -#define ddrcReg_CTLR_MEMC_REG_OFFSET 0x0000 -#define ddrcReg_CTLR_MEMC_REGP ((volatile ddrcReg_CTLR_MEMC_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_MEMC_REG_OFFSET)) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_MEMC_STATUS_BANKS_MASK (0x3 << 12) -#define ddrcReg_CTLR_MEMC_STATUS_BANKS_4 (0x0 << 12) -#define ddrcReg_CTLR_MEMC_STATUS_BANKS_8 (0x3 << 12) - -#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_MASK (0x3 << 10) -#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_0 (0x0 << 10) -#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_1 (0x1 << 10) -#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_2 (0x2 << 10) -#define ddrcReg_CTLR_MEMC_STATUS_MONITORS_4 (0x3 << 10) - -#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_MASK (0x3 << 7) -#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_1 (0x0 << 7) -#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_2 (0x1 << 7) -#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_3 (0x2 << 7) -#define ddrcReg_CTLR_MEMC_STATUS_CHIPS_4 (0x3 << 7) - -#define ddrcReg_CTLR_MEMC_STATUS_TYPE_MASK (0x7 << 4) -#define ddrcReg_CTLR_MEMC_STATUS_TYPE_DDR2 (0x5 << 4) - -#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_MASK (0x3 << 2) -#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_16 (0x0 << 2) -#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_32 (0x1 << 2) -#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_64 (0x2 << 2) -#define ddrcReg_CTLR_MEMC_STATUS_WIDTH_128 (0x3 << 2) - -#define ddrcReg_CTLR_MEMC_STATUS_STATE_MASK (0x3 << 0) -#define ddrcReg_CTLR_MEMC_STATUS_STATE_CONFIG (0x0 << 0) -#define ddrcReg_CTLR_MEMC_STATUS_STATE_READY (0x1 << 0) -#define ddrcReg_CTLR_MEMC_STATUS_STATE_PAUSED (0x2 << 0) -#define ddrcReg_CTLR_MEMC_STATUS_STATE_LOWPWR (0x3 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_MEMC_CMD_MASK (0x7 << 0) -#define ddrcReg_CTLR_MEMC_CMD_GO (0x0 << 0) -#define ddrcReg_CTLR_MEMC_CMD_SLEEP (0x1 << 0) -#define ddrcReg_CTLR_MEMC_CMD_WAKEUP (0x2 << 0) -#define ddrcReg_CTLR_MEMC_CMD_PAUSE (0x3 << 0) -#define ddrcReg_CTLR_MEMC_CMD_CONFIGURE (0x4 << 0) -#define ddrcReg_CTLR_MEMC_CMD_ACTIVE_PAUSE (0x7 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT 20 -#define ddrcReg_CTLR_DIRECT_CMD_CHIP_MASK (0x3 << ddrcReg_CTLR_DIRECT_CMD_CHIP_SHIFT) - -#define ddrcReg_CTLR_DIRECT_CMD_TYPE_PRECHARGEALL (0x0 << 18) -#define ddrcReg_CTLR_DIRECT_CMD_TYPE_AUTOREFRESH (0x1 << 18) -#define ddrcReg_CTLR_DIRECT_CMD_TYPE_MODEREG (0x2 << 18) -#define ddrcReg_CTLR_DIRECT_CMD_TYPE_NOP (0x3 << 18) - -#define ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT 16 -#define ddrcReg_CTLR_DIRECT_CMD_BANK_MASK (0x3 << ddrcReg_CTLR_DIRECT_CMD_BANK_SHIFT) - -#define ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT 0 -#define ddrcReg_CTLR_DIRECT_CMD_ADDR_MASK (0x1ffff << ddrcReg_CTLR_DIRECT_CMD_ADDR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_MASK (0x3 << 21) -#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_1 (0x0 << 21) -#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_2 (0x1 << 21) -#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_3 (0x2 << 21) -#define ddrcReg_CTLR_MEMORY_CFG_CHIP_CNT_4 (0x3 << 21) - -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_MASK (0x7 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_3_0 (0x0 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_4_1 (0x1 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_5_2 (0x2 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_6_3 (0x3 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_7_4 (0x4 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_8_5 (0x5 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_9_6 (0x6 << 18) -#define ddrcReg_CTLR_MEMORY_CFG_QOS_ARID_10_7 (0x7 << 18) - -#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_MASK (0x7 << 15) -#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_4 (0x2 << 15) -#define ddrcReg_CTLR_MEMORY_CFG_BURST_LEN_8 (0x3 << 15) /* @note Not supported in PL341 */ - -#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_ENABLE (0x1 << 13) - -#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT 7 -#define ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_MASK (0x3f << ddrcReg_CTLR_MEMORY_CFG_PWRDOWN_CYCLES_SHIFT) - -#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_MASK (0x7 << 3) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_11 (0x0 << 3) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_12 (0x1 << 3) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_13 (0x2 << 3) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_14 (0x3 << 3) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_15 (0x4 << 3) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_ROW_BITS_16 (0x5 << 3) - -#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_MASK (0x7 << 0) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_9 (0x1 << 0) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_10 (0x2 << 0) -#define ddrcReg_CTLR_MEMORY_CFG_AXI_COL_BITS_11 (0x3 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_REFRESH_PRD_SHIFT 0 -#define ddrcReg_CTLR_REFRESH_PRD_MASK (0x7fff << ddrcReg_CTLR_REFRESH_PRD_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_CAS_LATENCY_SHIFT 1 -#define ddrcReg_CTLR_CAS_LATENCY_MASK (0x7 << ddrcReg_CTLR_CAS_LATENCY_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_WRITE_LATENCY_SHIFT 0 -#define ddrcReg_CTLR_WRITE_LATENCY_MASK (0x7 << ddrcReg_CTLR_WRITE_LATENCY_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_MRD_SHIFT 0 -#define ddrcReg_CTLR_T_MRD_MASK (0x7f << ddrcReg_CTLR_T_MRD_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_RAS_SHIFT 0 -#define ddrcReg_CTLR_T_RAS_MASK (0x1f << ddrcReg_CTLR_T_RAS_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_RC_SHIFT 0 -#define ddrcReg_CTLR_T_RC_MASK (0x1f << ddrcReg_CTLR_T_RC_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT 8 -#define ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_MASK (0x7 << ddrcReg_CTLR_T_RCD_SCHEDULE_DELAY_SHIFT) - -#define ddrcReg_CTLR_T_RCD_SHIFT 0 -#define ddrcReg_CTLR_T_RCD_MASK (0x7 << ddrcReg_CTLR_T_RCD_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT 8 -#define ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_MASK (0x7f << ddrcReg_CTLR_T_RFC_SCHEDULE_DELAY_SHIFT) - -#define ddrcReg_CTLR_T_RFC_SHIFT 0 -#define ddrcReg_CTLR_T_RFC_MASK (0x7f << ddrcReg_CTLR_T_RFC_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT 8 -#define ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_MASK (0x7 << ddrcReg_CTLR_T_RP_SCHEDULE_DELAY_SHIFT) - -#define ddrcReg_CTLR_T_RP_SHIFT 0 -#define ddrcReg_CTLR_T_RP_MASK (0xf << ddrcReg_CTLR_T_RP_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_RRD_SHIFT 0 -#define ddrcReg_CTLR_T_RRD_MASK (0xf << ddrcReg_CTLR_T_RRD_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_WR_SHIFT 0 -#define ddrcReg_CTLR_T_WR_MASK (0x7 << ddrcReg_CTLR_T_WR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_WTR_SHIFT 0 -#define ddrcReg_CTLR_T_WTR_MASK (0x7 << ddrcReg_CTLR_T_WTR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_XP_SHIFT 0 -#define ddrcReg_CTLR_T_XP_MASK (0xff << ddrcReg_CTLR_T_XP_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_XSR_SHIFT 0 -#define ddrcReg_CTLR_T_XSR_MASK (0xff << ddrcReg_CTLR_T_XSR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_ESR_SHIFT 0 -#define ddrcReg_CTLR_T_ESR_MASK (0xff << ddrcReg_CTLR_T_ESR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_MASK (0x3 << 6) -#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_16BITS (0 << 6) -#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_32BITS (1 << 6) -#define ddrcReg_CTLR_MEMORY_CFG2_WIDTH_64BITS (2 << 6) - -#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_MASK (0x3 << 4) -#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_2 (0 << 4) -#define ddrcReg_CTLR_MEMORY_CFG2_AXI_BANK_BITS_3 (3 << 4) - -#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_LOW (0 << 3) -#define ddrcReg_CTLR_MEMORY_CFG2_CKE_INIT_STATE_HIGH (1 << 3) - -#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_LOW (0 << 2) -#define ddrcReg_CTLR_MEMORY_CFG2_DQM_INIT_STATE_HIGH (1 << 2) - -#define ddrcReg_CTLR_MEMORY_CFG2_CLK_MASK (0x3 << 0) -#define ddrcReg_CTLR_MEMORY_CFG2_CLK_ASYNC (0 << 0) -#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_LE_M (1 << 0) -#define ddrcReg_CTLR_MEMORY_CFG2_CLK_SYNC_A_GT_M (3 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT 0 -#define ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_MASK (0x7 << ddrcReg_CTLR_MEMORY_CFG3_REFRESH_TO_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT 8 -#define ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_MASK (0x1f << ddrcReg_CTLR_T_FAW_SCHEDULE_DELAY_SHIFT) - -#define ddrcReg_CTLR_T_FAW_PERIOD_SHIFT 0 -#define ddrcReg_CTLR_T_FAW_PERIOD_MASK (0x1f << ddrcReg_CTLR_T_FAW_PERIOD_SHIFT) - -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ -/* ARM PL341 AXI ID QOS configuration registers, offset 0x100 */ -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ - -#define ddrcReg_CTLR_QOS_CNT 16 -#define ddrcReg_CTLR_QOS_MAX (ddrcReg_CTLR_QOS_CNT - 1) - - typedef struct { - uint32_t cfg[ddrcReg_CTLR_QOS_CNT]; - } ddrcReg_CTLR_QOS_REG_t; - -#define ddrcReg_CTLR_QOS_REG_OFFSET 0x100 -#define ddrcReg_CTLR_QOS_REGP ((volatile ddrcReg_CTLR_QOS_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_QOS_REG_OFFSET)) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_QOS_CFG_MAX_SHIFT 2 -#define ddrcReg_CTLR_QOS_CFG_MAX_MASK (0xff << ddrcReg_CTLR_QOS_CFG_MAX_SHIFT) - -#define ddrcReg_CTLR_QOS_CFG_MIN_SHIFT 1 -#define ddrcReg_CTLR_QOS_CFG_MIN_MASK (1 << ddrcReg_CTLR_QOS_CFG_MIN_SHIFT) - -#define ddrcReg_CTLR_QOS_CFG_ENABLE (1 << 0) - -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ -/* ARM PL341 Memory chip configuration registers, offset 0x200 */ -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ - -#define ddrcReg_CTLR_CHIP_CNT 4 -#define ddrcReg_CTLR_CHIP_MAX (ddrcReg_CTLR_CHIP_CNT - 1) - - typedef struct { - uint32_t cfg[ddrcReg_CTLR_CHIP_CNT]; - } ddrcReg_CTLR_CHIP_REG_t; - -#define ddrcReg_CTLR_CHIP_REG_OFFSET 0x200 -#define ddrcReg_CTLR_CHIP_REGP ((volatile ddrcReg_CTLR_CHIP_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_CHIP_REG_OFFSET)) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_MASK (1 << 16) -#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_ROW_BANK_COL (0 << 16) -#define ddrcReg_CTLR_CHIP_CFG_MEM_ORG_BANK_ROW_COL (1 << 16) - -#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT 8 -#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_MASK (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MATCH_SHIFT) - -#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT 0 -#define ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_MASK (0xff << ddrcReg_CTLR_CHIP_CFG_AXI_ADDR_MASK_SHIFT) - -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ -/* ARM PL341 User configuration registers, offset 0x300 */ -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ - -#define ddrcReg_CTLR_USER_OUTPUT_CNT 2 - - typedef struct { - uint32_t input; - uint32_t output[ddrcReg_CTLR_USER_OUTPUT_CNT]; - uint32_t feature; - } ddrcReg_CTLR_USER_REG_t; - -#define ddrcReg_CTLR_USER_REG_OFFSET 0x300 -#define ddrcReg_CTLR_USER_REGP ((volatile ddrcReg_CTLR_USER_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_USER_REG_OFFSET)) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT 0 -#define ddrcReg_CTLR_USER_INPUT_STATUS_MASK (0xff << ddrcReg_CTLR_USER_INPUT_STATUS_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT 0 -#define ddrcReg_CTLR_USER_OUTPUT_CFG_MASK (0xff << ddrcReg_CTLR_USER_OUTPUT_CFG_SHIFT) - -#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT 1 -#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_MASK (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT) -#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_BP134 (0 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT) -#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301 (1 << ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_SHIFT) -#define ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_USER_OUTPUT_0_CFG_SYNC_BRIDGE_PL301 - -/* ----------------------------------------------------- */ - -#define ddrcReg_CTLR_FEATURE_WRITE_BLOCK_DISABLE (1 << 2) -#define ddrcReg_CTLR_FEATURE_EARLY_BURST_RSP_DISABLE (1 << 0) - -/*********************************************************************/ -/* Broadcom DDR23 PHY register definitions */ -/*********************************************************************/ - -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ -/* Broadcom DDR23 PHY Address and Control register definitions */ -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ - - typedef struct { - uint32_t revision; - uint32_t pmCtl; - REG32_RSVD(0x0008, 0x0010); - uint32_t pllStatus; - uint32_t pllCfg; - uint32_t pllPreDiv; - uint32_t pllDiv; - uint32_t pllCtl1; - uint32_t pllCtl2; - uint32_t ssCtl; - uint32_t ssCfg; - uint32_t vdlStatic; - uint32_t vdlDynamic; - uint32_t padIdle; - uint32_t pvtComp; - uint32_t padDrive; - uint32_t clkRgltrCtl; - } ddrcReg_PHY_ADDR_CTL_REG_t; - -#define ddrcReg_PHY_ADDR_CTL_REG_OFFSET 0x0400 -#define ddrcReg_PHY_ADDR_CTL_REGP ((volatile ddrcReg_PHY_ADDR_CTL_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_ADDR_CTL_REG_OFFSET)) - -/* @todo These SS definitions are duplicates of ones below */ - -#define ddrcReg_PHY_ADDR_SS_CTRL_ENABLE 0x00000001 -#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_MASK 0xFFFF0000 -#define ddrcReg_PHY_ADDR_SS_CFG_CYCLE_PER_TICK_SHIFT 16 -#define ddrcReg_PHY_ADDR_SS_CFG_MIN_CYCLE_PER_TICK 10 /* Higher the value, lower the SS modulation frequency */ -#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_MASK 0x0000FFFF -#define ddrcReg_PHY_ADDR_SS_CFG_NDIV_AMPLITUDE_SHIFT 0 - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT 8 -#define ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_MASK (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MAJOR_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_MASK (0xff << ddrcReg_PHY_ADDR_CTL_REVISION_MINOR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_CLK_PM_CTL_DDR_CLK_DISABLE (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PLL_STATUS_LOCKED (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_DIV2_CLK_RESET (1 << 31) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT 17 -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_SEL_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_TEST_ENABLE (1 << 16) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT 12 -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_CFG_BGAP_ADJ_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_VCO_RNG (1 << 7) -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CH1_PWRDWN (1 << 6) -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_BYPASS_ENABLE (1 << 5) -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_CLKOUT_ENABLE (1 << 4) -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_D_RESET (1 << 3) -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_A_RESET (1 << 2) -#define ddrcReg_PHY_ADDR_CTL_PLL_CFG_PWRDWN (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_DITHER_MFB (1 << 26) -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_PWRDWN (1 << 25) - -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT 20 -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_MODE_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT 8 -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_MASK (0x1ff << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_INT_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT 4 -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P2_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PLL_PRE_DIV_P1_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT 24 -#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_MASK (0xff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_M1_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_MASK (0xffffff << ddrcReg_PHY_ADDR_CTL_PLL_DIV_FRAC_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT 30 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_TESTA_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT 27 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XS_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT 24 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_KVCO_XF_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT 22 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LPF_BW_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_LF_ORDER (0x1 << 21) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT 19 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CN_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT 17 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RN_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT 15 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CP_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT 13 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_CZ_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT 10 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_MASK (0x7 << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_RZ_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT 5 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICPX_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_MASK (0x1f << ddrcReg_PHY_ADDR_CTL_PLL_CTL1_ICP_OFF_SHIFT) - -/* ----------------------------------------------------- */ -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT 4 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_PTAP_ADJ_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT 2 -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_PLL_CTL2_CTAP_ADJ_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_LOWCUR_ENABLE (0x1 << 1) -#define ddrcReg_PHY_ADDR_CTL_PLL_CTL2_BIASIN_ENABLE (0x1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PLL_SS_EN_ENABLE (0x1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT 16 -#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_MASK (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_CYC_PER_TICK_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_MASK (0xffff << ddrcReg_PHY_ADDR_CTL_PLL_SS_CFG_NDIV_AMP_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FORCE (1 << 20) -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_ENABLE (1 << 16) - -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT 12 -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_FALL_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT 8 -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_RISE_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_MASK (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_STATIC_OVR_STEP_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_ENABLE (1 << 16) - -#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT 12 -#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_FALL_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT 8 -#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_MASK (0x3 << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_RISE_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_MASK (0x3f << ddrcReg_PHY_ADDR_CTL_VDL_DYNAMIC_OVR_STEP_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_ENABLE (1u << 31) -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_RXENB_DISABLE (1 << 8) -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_IDDQ_DISABLE (1 << 6) -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_REB_DISABLE (1 << 5) -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CTL_OEB_DISABLE (1 << 4) -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_IDDQ_DISABLE (1 << 2) -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_REB_DISABLE (1 << 1) -#define ddrcReg_PHY_ADDR_CTL_PAD_IDLE_CKE_OEB_DISABLE (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_DONE (1 << 30) -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_DONE (1 << 29) -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_DONE (1 << 28) -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_AUTO_ENABLE (1 << 27) -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_SAMPLE_ENABLE (1 << 26) -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_OVR_ENABLE (1 << 25) -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_OVR_ENABLE (1 << 24) - -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT 20 -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_PD_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT 16 -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ND_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT 12 -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_PD_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT 8 -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_ADDR_ND_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT 4 -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_PD_SHIFT) - -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT 0 -#define ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_MASK (0xf << ddrcReg_PHY_ADDR_CTL_PVT_COMP_DQ_ND_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_RT60B (1 << 4) -#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SEL_SSTL18 (1 << 3) -#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELTXDRV_CI (1 << 2) -#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SELRXDRV (1 << 1) -#define ddrcReg_PHY_ADDR_CTL_PAD_DRIVE_SLEW (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_HALF (1 << 1) -#define ddrcReg_PHY_ADDR_CTL_CLK_RGLTR_CTL_PWR_OFF (1 << 0) - -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ -/* Broadcom DDR23 PHY Byte Lane register definitions */ -/* -------------------------------------------------------------------- */ -/* -------------------------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_CNT 2 -#define ddrcReg_PHY_BYTE_LANE_MAX (ddrcReg_CTLR_BYTE_LANE_CNT - 1) - -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT 8 - - typedef struct { - uint32_t revision; - uint32_t vdlCalibrate; - uint32_t vdlStatus; - REG32_RSVD(0x000c, 0x0010); - uint32_t vdlOverride[ddrcReg_PHY_BYTE_LANE_VDL_OVR_CNT]; - uint32_t readCtl; - uint32_t readStatus; - uint32_t readClear; - uint32_t padIdleCtl; - uint32_t padDriveCtl; - uint32_t padClkCtl; - uint32_t writeCtl; - uint32_t clkRegCtl; - } ddrcReg_PHY_BYTE_LANE_REG_t; - -/* There are 2 instances of the byte Lane registers, one for each byte lane. */ -#define ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET 0x0500 -#define ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET 0x0600 - -#define ddrcReg_PHY_BYTE_LANE_1_REGP ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_1_REG_OFFSET)) -#define ddrcReg_PHY_BYTE_LANE_2_REGP ((volatile ddrcReg_PHY_BYTE_LANE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_PHY_BYTE_LANE_2_REG_OFFSET)) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT 8 -#define ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_MASK (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MAJOR_SHIFT) - -#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT 0 -#define ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_MASK (0xff << ddrcReg_PHY_BYTE_LANE_REVISION_MINOR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_2CYCLE (1 << 4) -#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_CLK_1CYCLE (0 << 4) - -#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_TEST (1 << 3) -#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ALWAYS (1 << 2) -#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_ONCE (1 << 1) -#define ddrcReg_PHY_BYTE_LANE_VDL_CALIB_FAST (1 << 0) - -/* ----------------------------------------------------- */ - -/* The byte lane VDL status calibTotal[9:0] is comprised of [9:4] step value, [3:2] fine fall */ -/* and [1:0] fine rise. Note that calibTotal[9:0] is located at bit 4 in the VDL status */ -/* register. The fine rise and fall are no longer used, so add some definitions for just */ -/* the step setting to simplify things. */ - -#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT 8 -#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_MASK (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_STEP_SHIFT) - -#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT 4 -#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_MASK (0x3ff << ddrcReg_PHY_BYTE_LANE_VDL_STATUS_TOTAL_SHIFT) - -#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_LOCK (1 << 1) -#define ddrcReg_PHY_BYTE_LANE_VDL_STATUS_IDLE (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_ENABLE (1 << 16) - -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT 12 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_FALL_SHIFT) - -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT 8 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_VDL_OVR_RISE_SHIFT) - -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT 0 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_MASK (0x3f << ddrcReg_PHY_BYTE_LANE_VDL_OVR_STEP_SHIFT) - -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_P 0 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_DQS_N 1 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_READ_EN 2 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_STATIC_WRITE_DQ_DQM 3 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_P 4 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_DQS_N 5 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_READ_EN 6 -#define ddrcReg_PHY_BYTE_LANE_VDL_OVR_IDX_DYNAMIC_WRITE_DQ_DQM 7 - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT 8 -#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_MASK (0x3 << ddrcReg_PHY_BYTE_LANE_READ_CTL_DELAY_SHIFT) - -#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ENABLE (1 << 3) -#define ddrcReg_PHY_BYTE_LANE_READ_CTL_DQ_ODT_ADJUST (1 << 2) -#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ENABLE (1 << 1) -#define ddrcReg_PHY_BYTE_LANE_READ_CTL_RD_ODT_ADJUST (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT 0 -#define ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_MASK (0xf << ddrcReg_PHY_BYTE_LANE_READ_STATUS_ERROR_SHIFT) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_READ_CLEAR_STATUS (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_ENABLE (1u << 31) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_RXENB_DISABLE (1 << 19) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_IDDQ_DISABLE (1 << 18) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_REB_DISABLE (1 << 17) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DM_OEB_DISABLE (1 << 16) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_RXENB_DISABLE (1 << 15) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_IDDQ_DISABLE (1 << 14) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_REB_DISABLE (1 << 13) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQ_OEB_DISABLE (1 << 12) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_RXENB_DISABLE (1 << 11) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_IDDQ_DISABLE (1 << 10) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_REB_DISABLE (1 << 9) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_READ_ENB_OEB_DISABLE (1 << 8) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_RXENB_DISABLE (1 << 7) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_IDDQ_DISABLE (1 << 6) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_REB_DISABLE (1 << 5) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_DQS_OEB_DISABLE (1 << 4) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_RXENB_DISABLE (1 << 3) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_IDDQ_DISABLE (1 << 2) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_REB_DISABLE (1 << 1) -#define ddrcReg_PHY_BYTE_LANE_PAD_IDLE_CTL_CLK_OEB_DISABLE (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B_DDR_READ_ENB (1 << 5) -#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_RT60B (1 << 4) -#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SEL_SSTL18 (1 << 3) -#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELTXDRV_CI (1 << 2) -#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SELRXDRV (1 << 1) -#define ddrcReg_PHY_BYTE_LANE_PAD_DRIVE_CTL_SLEW (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_PAD_CLK_CTL_DISABLE (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_WRITE_CTL_PREAMBLE_DDR3 (1 << 0) - -/* ----------------------------------------------------- */ - -#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_HALF (1 << 1) -#define ddrcReg_PHY_BYTE_LANE_CLK_REG_CTL_PWR_OFF (1 << 0) - -/*********************************************************************/ -/* ARM PL341 DDRC to Broadcom DDR23 PHY glue register definitions */ -/*********************************************************************/ - - typedef struct { - uint32_t cfg; - uint32_t actMonCnt; - uint32_t ctl; - uint32_t lbistCtl; - uint32_t lbistSeed; - uint32_t lbistStatus; - uint32_t tieOff; - uint32_t actMonClear; - uint32_t status; - uint32_t user; - } ddrcReg_CTLR_PHY_GLUE_REG_t; - -#define ddrcReg_CTLR_PHY_GLUE_OFFSET 0x0700 -#define ddrcReg_CTLR_PHY_GLUE_REGP ((volatile ddrcReg_CTLR_PHY_GLUE_REG_t *) (MM_IO_BASE_DDRC + ddrcReg_CTLR_PHY_GLUE_OFFSET)) - -/* ----------------------------------------------------- */ - -/* DDR2 / AXI block phase alignment interrupt control */ -#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT 18 -#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_MASK (0x3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_OFF (0 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_TIGHT (1 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_MEDIUM (2 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_INT_ON_LOOSE (3 << ddrcReg_CTLR_PHY_GLUE_CFG_INT_SHIFT) - -#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT 17 -#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_DIFFERENTIAL (0 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_CMOS (1 << ddrcReg_CTLR_PHY_GLUE_CFG_PLL_REFCLK_SHIFT) - -#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT 16 -#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_DEEP (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_HW_FIXED_ALIGNMENT_DISABLED ddrcReg_CTLR_PHY_GLUE_CFG_DIV2CLK_TREE_SHALLOW - -#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT 15 -#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_BP134 (0 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_REGISTERED ddrcReg_CTLR_PHY_GLUE_CFG_SYNC_BRIDGE_PL301 - -/* Software control of PHY VDL updates from control register settings. Bit 13 enables the use of Bit 14. */ -/* If software control is not enabled, then updates occur when a refresh command is issued by the hardware */ -/* controller. If 2 chips selects are being used, then software control must be enabled. */ -#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_LOAD (1 << 14) -#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_VDL_UPDATE_SW_CTL_ENABLE (1 << 13) - -/* Use these to bypass a pipeline stage. By default the ADDR is off but the BYTE LANE in / out are on. */ -#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_ADDR_CTL_IN_BYPASS_PIPELINE_STAGE (1 << 12) -#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_IN_BYPASS_PIPELINE_STAGE (1 << 11) -#define ddrcReg_CTLR_PHY_GLUE_CFG_PHY_BYTE_LANE_OUT_BYPASS_PIPELINE_STAGE (1 << 10) - -/* Chip select count */ -#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT 9 -#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_MASK (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_1 (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_2 (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CS_CNT_SHIFT) - -#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT 8 -#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_ASYNC (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SYNC (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CLK_SHIFT) - -#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT 7 -#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_LOW (0 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_HIGH (1 << ddrcReg_CTLR_PHY_GLUE_CFG_CKE_INIT_SHIFT) - -#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT 6 -#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_LOW (0 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT) -#define ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_HIGH (1 << ddrcReg_CTLR_PHY_GLUE_CFG_DQM_INIT_SHIFT) - -#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT 0 -#define ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_MASK (0x7 << ddrcReg_CTLR_PHY_GLUE_CFG_CAS_LATENCY_SHIFT) - -/* ----------------------------------------------------- */ -#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT 0 -#define ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_MASK (0x7f << ddrcReg_CTLR_PHY_GLUE_STATUS_PHASE_SHIFT) - -/* ---- Public Function Prototypes --------------------------------------- */ - -#ifdef __cplusplus -} /* end extern "C" */ -#endif -#endif /* DDRC_REG_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h deleted file mode 100644 index d67e2f8c22de0c261c72c837bef0bca0be22e102..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_priv.h +++ /dev/null @@ -1,145 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dmacHw_priv.h -* -* @brief Private Definitions for low level DMA driver -* -*/ -/****************************************************************************/ - -#ifndef _DMACHW_PRIV_H -#define _DMACHW_PRIV_H - -#include - -/* Data type for DMA Link List Item */ -typedef struct { - uint32_t sar; /* Source Address Register. - Address must be aligned to CTLx.SRC_TR_WIDTH. */ - uint32_t dar; /* Destination Address Register. - Address must be aligned to CTLx.DST_TR_WIDTH. */ - uint32_t llpPhy; /* LLP contains the physical address of the next descriptor for block chaining using linked lists. - Address MUST be aligned to a 32-bit boundary. */ - dmacHw_REG64_t ctl; /* Control Register. 64 bits */ - uint32_t sstat; /* Source Status Register */ - uint32_t dstat; /* Destination Status Register */ - uint32_t devCtl; /* Device specific control information */ - uint32_t llp; /* LLP contains the virtual address of the next descriptor for block chaining using linked lists. */ -} dmacHw_DESC_t; - -/* - * Descriptor ring pointers - */ -typedef struct { - int num; /* Number of link items */ - dmacHw_DESC_t *pHead; /* Head of descriptor ring (for writing) */ - dmacHw_DESC_t *pTail; /* Tail of descriptor ring (for reading) */ - dmacHw_DESC_t *pProg; /* Descriptor to program the channel (for programming the channel register) */ - dmacHw_DESC_t *pEnd; /* End of current descriptor chain */ - dmacHw_DESC_t *pFree; /* Descriptor to free memory (freeing dynamic memory) */ - uint32_t virt2PhyOffset; /* Virtual to physical address offset for the descriptor ring */ -} dmacHw_DESC_RING_t; - -/* - * DMA channel control block - */ -typedef struct { - uint32_t module; /* DMA controller module (0-1) */ - uint32_t channel; /* DMA channel (0-7) */ - volatile uint32_t varDataStarted; /* Flag indicating variable data channel is enabled */ - volatile uint32_t descUpdated; /* Flag to indicate descriptor update is complete */ - void *userData; /* Channel specifc user data */ -} dmacHw_CBLK_t; - -#define dmacHw_ASSERT(a) if (!(a)) while (1) -#define dmacHw_MAX_CHANNEL_COUNT 16 -#define dmacHw_FREE_USER_MEMORY 0xFFFFFFFF -#define dmacHw_DESC_FREE dmacHw_REG_CTL_DONE -#define dmacHw_DESC_INIT ((dmacHw_DESC_t *) 0xFFFFFFFF) -#define dmacHw_MAX_BLOCKSIZE 4064 -#define dmacHw_GET_DESC_RING(addr) (dmacHw_DESC_RING_t *)(addr) -#define dmacHw_ADDRESS_MASK(byte) ((byte) - 1) -#define dmacHw_NEXT_DESC(rp, dp) ((rp)->dp = (dmacHw_DESC_t *)(rp)->dp->llp) -#define dmacHw_HANDLE_TO_CBLK(handle) ((dmacHw_CBLK_t *) (handle)) -#define dmacHw_CBLK_TO_HANDLE(cblkp) ((dmacHw_HANDLE_t) (cblkp)) -#define dmacHw_DST_IS_MEMORY(tt) (((tt) == dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM) || ((tt) == dmacHw_TRANSFER_TYPE_MEM_TO_MEM)) ? 1 : 0 - -/****************************************************************************/ -/** -* @brief Get next available transaction width -* -* -* @return On success : Next available transaction width -* On failure : dmacHw_TRANSACTION_WIDTH_8 -* -* @note -* None -*/ -/****************************************************************************/ -static inline dmacHw_TRANSACTION_WIDTH_e dmacHw_GetNextTrWidth(dmacHw_TRANSACTION_WIDTH_e tw /* [ IN ] Current transaction width */ - ) { - if (tw & dmacHw_REG_CTL_SRC_TR_WIDTH_MASK) { - return ((tw >> dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT) - - 1) << dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT; - } else if (tw & dmacHw_REG_CTL_DST_TR_WIDTH_MASK) { - return ((tw >> dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT) - - 1) << dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT; - } - - /* Default return */ - return dmacHw_SRC_TRANSACTION_WIDTH_8; -} - -/****************************************************************************/ -/** -* @brief Get number of bytes per transaction -* -* @return Number of bytes per transaction -* -* -* @note -* None -*/ -/****************************************************************************/ -static inline int dmacHw_GetTrWidthInBytes(dmacHw_TRANSACTION_WIDTH_e tw /* [ IN ] Transaction width */ - ) { - int width = 1; - switch (tw) { - case dmacHw_SRC_TRANSACTION_WIDTH_8: - width = 1; - break; - case dmacHw_SRC_TRANSACTION_WIDTH_16: - case dmacHw_DST_TRANSACTION_WIDTH_16: - width = 2; - break; - case dmacHw_SRC_TRANSACTION_WIDTH_32: - case dmacHw_DST_TRANSACTION_WIDTH_32: - width = 4; - break; - case dmacHw_SRC_TRANSACTION_WIDTH_64: - case dmacHw_DST_TRANSACTION_WIDTH_64: - width = 8; - break; - default: - dmacHw_ASSERT(0); - } - - /* Default transaction width */ - return width; -} - -#endif /* _DMACHW_PRIV_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h deleted file mode 100644 index f1ecf96f2da56980f5d03ce9bd67eb277ae47ae2..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/dmacHw_reg.h +++ /dev/null @@ -1,406 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dmacHw_reg.h -* -* @brief Definitions for low level DMA registers -* -*/ -/****************************************************************************/ - -#ifndef _DMACHW_REG_H -#define _DMACHW_REG_H - -#include -#include - -/* Data type for 64 bit little endian register */ -typedef struct { - volatile uint32_t lo; /* Lower 32 bit in little endian mode */ - volatile uint32_t hi; /* Upper 32 bit in little endian mode */ -} dmacHw_REG64_t; - -/* Data type representing DMA channel registers */ -typedef struct { - dmacHw_REG64_t ChannelSar; /* Source Address Register. 64 bits (upper 32 bits are reserved) - Address must be aligned to CTLx.SRC_TR_WIDTH. - */ - dmacHw_REG64_t ChannelDar; /* Destination Address Register.64 bits (upper 32 bits are reserved) - Address must be aligned to CTLx.DST_TR_WIDTH. - */ - dmacHw_REG64_t ChannelLlp; /* Link List Pointer.64 bits (upper 32 bits are reserved) - LLP contains the pointer to the next LLI for block chaining using linked lists. - If LLPis set to 0x0, then transfers using linked lists are not enabled. - Address MUST be aligned to a 32-bit boundary. - */ - dmacHw_REG64_t ChannelCtl; /* Control Register. 64 bits */ - dmacHw_REG64_t ChannelSstat; /* Source Status Register */ - dmacHw_REG64_t ChannelDstat; /* Destination Status Register */ - dmacHw_REG64_t ChannelSstatAddr; /* Source Status Address Register */ - dmacHw_REG64_t ChannelDstatAddr; /* Destination Status Address Register */ - dmacHw_REG64_t ChannelConfig; /* Channel Configuration Register */ - dmacHw_REG64_t SrcGather; /* Source gather register */ - dmacHw_REG64_t DstScatter; /* Destination scatter register */ -} dmacHw_CH_REG_t; - -/* Data type for RAW interrupt status registers */ -typedef struct { - dmacHw_REG64_t RawTfr; /* Raw Status for IntTfr Interrupt */ - dmacHw_REG64_t RawBlock; /* Raw Status for IntBlock Interrupt */ - dmacHw_REG64_t RawSrcTran; /* Raw Status for IntSrcTran Interrupt */ - dmacHw_REG64_t RawDstTran; /* Raw Status for IntDstTran Interrupt */ - dmacHw_REG64_t RawErr; /* Raw Status for IntErr Interrupt */ -} dmacHw_INT_RAW_t; - -/* Data type for interrupt status registers */ -typedef struct { - dmacHw_REG64_t StatusTfr; /* Status for IntTfr Interrupt */ - dmacHw_REG64_t StatusBlock; /* Status for IntBlock Interrupt */ - dmacHw_REG64_t StatusSrcTran; /* Status for IntSrcTran Interrupt */ - dmacHw_REG64_t StatusDstTran; /* Status for IntDstTran Interrupt */ - dmacHw_REG64_t StatusErr; /* Status for IntErr Interrupt */ -} dmacHw_INT_STATUS_t; - -/* Data type for interrupt mask registers*/ -typedef struct { - dmacHw_REG64_t MaskTfr; /* Mask for IntTfr Interrupt */ - dmacHw_REG64_t MaskBlock; /* Mask for IntBlock Interrupt */ - dmacHw_REG64_t MaskSrcTran; /* Mask for IntSrcTran Interrupt */ - dmacHw_REG64_t MaskDstTran; /* Mask for IntDstTran Interrupt */ - dmacHw_REG64_t MaskErr; /* Mask for IntErr Interrupt */ -} dmacHw_INT_MASK_t; - -/* Data type for interrupt clear registers */ -typedef struct { - dmacHw_REG64_t ClearTfr; /* Clear for IntTfr Interrupt */ - dmacHw_REG64_t ClearBlock; /* Clear for IntBlock Interrupt */ - dmacHw_REG64_t ClearSrcTran; /* Clear for IntSrcTran Interrupt */ - dmacHw_REG64_t ClearDstTran; /* Clear for IntDstTran Interrupt */ - dmacHw_REG64_t ClearErr; /* Clear for IntErr Interrupt */ - dmacHw_REG64_t StatusInt; /* Status for each interrupt type */ -} dmacHw_INT_CLEAR_t; - -/* Data type for software handshaking registers */ -typedef struct { - dmacHw_REG64_t ReqSrcReg; /* Source Software Transaction Request Register */ - dmacHw_REG64_t ReqDstReg; /* Destination Software Transaction Request Register */ - dmacHw_REG64_t SglReqSrcReg; /* Single Source Transaction Request Register */ - dmacHw_REG64_t SglReqDstReg; /* Single Destination Transaction Request Register */ - dmacHw_REG64_t LstSrcReg; /* Last Source Transaction Request Register */ - dmacHw_REG64_t LstDstReg; /* Last Destination Transaction Request Register */ -} dmacHw_SW_HANDSHAKE_t; - -/* Data type for misc. registers */ -typedef struct { - dmacHw_REG64_t DmaCfgReg; /* DMA Configuration Register */ - dmacHw_REG64_t ChEnReg; /* DMA Channel Enable Register */ - dmacHw_REG64_t DmaIdReg; /* DMA ID Register */ - dmacHw_REG64_t DmaTestReg; /* DMA Test Register */ - dmacHw_REG64_t Reserved0; /* Reserved */ - dmacHw_REG64_t Reserved1; /* Reserved */ - dmacHw_REG64_t CompParm6; /* Component Parameter 6 */ - dmacHw_REG64_t CompParm5; /* Component Parameter 5 */ - dmacHw_REG64_t CompParm4; /* Component Parameter 4 */ - dmacHw_REG64_t CompParm3; /* Component Parameter 3 */ - dmacHw_REG64_t CompParm2; /* Component Parameter 2 */ - dmacHw_REG64_t CompParm1; /* Component Parameter 1 */ - dmacHw_REG64_t CompId; /* Compoent ID */ -} dmacHw_MISC_t; - -/* Base registers */ -#define dmacHw_0_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA0 /* DMAC 0 module's base address */ -#define dmacHw_1_MODULE_BASE_ADDR (char *) MM_IO_BASE_DMA1 /* DMAC 1 module's base address */ - -extern uint32_t dmaChannelCount_0; -extern uint32_t dmaChannelCount_1; - -/* Define channel specific registers */ -#define dmacHw_CHAN_BASE(module, chan) ((dmacHw_CH_REG_t *) ((char *)((module) ? dmacHw_1_MODULE_BASE_ADDR : dmacHw_0_MODULE_BASE_ADDR) + ((chan) * sizeof(dmacHw_CH_REG_t)))) - -/* Raw interrupt status registers */ -#define dmacHw_REG_INT_RAW_BASE(module) ((char *)dmacHw_CHAN_BASE((module), ((module) ? dmaChannelCount_1 : dmaChannelCount_0))) -#define dmacHw_REG_INT_RAW_TRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawTfr.lo) -#define dmacHw_REG_INT_RAW_BLOCK(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawBlock.lo) -#define dmacHw_REG_INT_RAW_STRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawSrcTran.lo) -#define dmacHw_REG_INT_RAW_DTRAN(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawDstTran.lo) -#define dmacHw_REG_INT_RAW_ERROR(module) (((dmacHw_INT_RAW_t *) dmacHw_REG_INT_RAW_BASE((module)))->RawErr.lo) - -/* Interrupt status registers */ -#define dmacHw_REG_INT_STAT_BASE(module) ((char *)(dmacHw_REG_INT_RAW_BASE((module)) + sizeof(dmacHw_INT_RAW_t))) -#define dmacHw_REG_INT_STAT_TRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusTfr.lo) -#define dmacHw_REG_INT_STAT_BLOCK(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusBlock.lo) -#define dmacHw_REG_INT_STAT_STRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusSrcTran.lo) -#define dmacHw_REG_INT_STAT_DTRAN(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusDstTran.lo) -#define dmacHw_REG_INT_STAT_ERROR(module) (((dmacHw_INT_STATUS_t *) dmacHw_REG_INT_STAT_BASE((module)))->StatusErr.lo) - -/* Interrupt status registers */ -#define dmacHw_REG_INT_MASK_BASE(module) ((char *)(dmacHw_REG_INT_STAT_BASE((module)) + sizeof(dmacHw_INT_STATUS_t))) -#define dmacHw_REG_INT_MASK_TRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskTfr.lo) -#define dmacHw_REG_INT_MASK_BLOCK(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskBlock.lo) -#define dmacHw_REG_INT_MASK_STRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskSrcTran.lo) -#define dmacHw_REG_INT_MASK_DTRAN(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskDstTran.lo) -#define dmacHw_REG_INT_MASK_ERROR(module) (((dmacHw_INT_MASK_t *) dmacHw_REG_INT_MASK_BASE((module)))->MaskErr.lo) - -/* Interrupt clear registers */ -#define dmacHw_REG_INT_CLEAR_BASE(module) ((char *)(dmacHw_REG_INT_MASK_BASE((module)) + sizeof(dmacHw_INT_MASK_t))) -#define dmacHw_REG_INT_CLEAR_TRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearTfr.lo) -#define dmacHw_REG_INT_CLEAR_BLOCK(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearBlock.lo) -#define dmacHw_REG_INT_CLEAR_STRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearSrcTran.lo) -#define dmacHw_REG_INT_CLEAR_DTRAN(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearDstTran.lo) -#define dmacHw_REG_INT_CLEAR_ERROR(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->ClearErr.lo) -#define dmacHw_REG_INT_STATUS(module) (((dmacHw_INT_CLEAR_t *) dmacHw_REG_INT_CLEAR_BASE((module)))->StatusInt.lo) - -/* Software handshaking registers */ -#define dmacHw_REG_SW_HS_BASE(module) ((char *)(dmacHw_REG_INT_CLEAR_BASE((module)) + sizeof(dmacHw_INT_CLEAR_t))) -#define dmacHw_REG_SW_HS_SRC_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->ReqDstReg.lo) -#define dmacHw_REG_SW_HS_SRC_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_SGL_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->SglReqDstReg.lo) -#define dmacHw_REG_SW_HS_SRC_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstSrcReg.lo) -#define dmacHw_REG_SW_HS_DST_LST_REQ(module) (((dmacHw_SW_HANDSHAKE_t *) dmacHw_REG_SW_HS_BASE((module)))->LstDstReg.lo) - -/* Miscellaneous registers */ -#define dmacHw_REG_MISC_BASE(module) ((char *)(dmacHw_REG_SW_HS_BASE((module)) + sizeof(dmacHw_SW_HANDSHAKE_t))) -#define dmacHw_REG_MISC_CFG(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaCfgReg.lo) -#define dmacHw_REG_MISC_CH_ENABLE(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->ChEnReg.lo) -#define dmacHw_REG_MISC_ID(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaIdReg.lo) -#define dmacHw_REG_MISC_TEST(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->DmaTestReg.lo) -#define dmacHw_REG_MISC_COMP_PARAM1_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.lo) -#define dmacHw_REG_MISC_COMP_PARAM1_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm1.hi) -#define dmacHw_REG_MISC_COMP_PARAM2_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.lo) -#define dmacHw_REG_MISC_COMP_PARAM2_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm2.hi) -#define dmacHw_REG_MISC_COMP_PARAM3_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.lo) -#define dmacHw_REG_MISC_COMP_PARAM3_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm3.hi) -#define dmacHw_REG_MISC_COMP_PARAM4_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.lo) -#define dmacHw_REG_MISC_COMP_PARAM4_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm4.hi) -#define dmacHw_REG_MISC_COMP_PARAM5_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.lo) -#define dmacHw_REG_MISC_COMP_PARAM5_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm5.hi) -#define dmacHw_REG_MISC_COMP_PARAM6_LO(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.lo) -#define dmacHw_REG_MISC_COMP_PARAM6_HI(module) (((dmacHw_MISC_t *) dmacHw_REG_MISC_BASE((module)))->CompParm6.hi) - -/* Channel control registers */ -#define dmacHw_REG_SAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSar.lo) -#define dmacHw_REG_DAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDar.lo) -#define dmacHw_REG_LLP(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelLlp.lo) - -#define dmacHw_REG_CTL_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.lo) -#define dmacHw_REG_CTL_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelCtl.hi) - -#define dmacHw_REG_SSTAT(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSstat.lo) -#define dmacHw_REG_DSTAT(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDstat.lo) -#define dmacHw_REG_SSTATAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelSstatAddr.lo) -#define dmacHw_REG_DSTATAR(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelDstatAddr.lo) - -#define dmacHw_REG_CFG_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.lo) -#define dmacHw_REG_CFG_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->ChannelConfig.hi) - -#define dmacHw_REG_SGR_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->SrcGather.lo) -#define dmacHw_REG_SGR_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->SrcGather.hi) - -#define dmacHw_REG_DSR_LO(module, chan) (dmacHw_CHAN_BASE((module), (chan))->DstScatter.lo) -#define dmacHw_REG_DSR_HI(module, chan) (dmacHw_CHAN_BASE((module), (chan))->DstScatter.hi) - -#define INT_STATUS_MASK(channel) (0x00000001 << (channel)) -#define CHANNEL_BUSY(mod, channel) (dmacHw_REG_MISC_CH_ENABLE((mod)) & (0x00000001 << (channel))) - -/* Bit mask for REG_DMACx_CTL_LO */ - -#define dmacHw_REG_CTL_INT_EN 0x00000001 /* Channel interrupt enable */ - -#define dmacHw_REG_CTL_DST_TR_WIDTH_MASK 0x0000000E /* Destination transaction width mask */ -#define dmacHw_REG_CTL_DST_TR_WIDTH_SHIFT 1 -#define dmacHw_REG_CTL_DST_TR_WIDTH_8 0x00000000 /* Destination transaction width 8 bit */ -#define dmacHw_REG_CTL_DST_TR_WIDTH_16 0x00000002 /* Destination transaction width 16 bit */ -#define dmacHw_REG_CTL_DST_TR_WIDTH_32 0x00000004 /* Destination transaction width 32 bit */ -#define dmacHw_REG_CTL_DST_TR_WIDTH_64 0x00000006 /* Destination transaction width 64 bit */ - -#define dmacHw_REG_CTL_SRC_TR_WIDTH_MASK 0x00000070 /* Source transaction width mask */ -#define dmacHw_REG_CTL_SRC_TR_WIDTH_SHIFT 4 -#define dmacHw_REG_CTL_SRC_TR_WIDTH_8 0x00000000 /* Source transaction width 8 bit */ -#define dmacHw_REG_CTL_SRC_TR_WIDTH_16 0x00000010 /* Source transaction width 16 bit */ -#define dmacHw_REG_CTL_SRC_TR_WIDTH_32 0x00000020 /* Source transaction width 32 bit */ -#define dmacHw_REG_CTL_SRC_TR_WIDTH_64 0x00000030 /* Source transaction width 64 bit */ - -#define dmacHw_REG_CTL_DS_ENABLE 0x00040000 /* Destination scatter enable */ -#define dmacHw_REG_CTL_SG_ENABLE 0x00020000 /* Source gather enable */ - -#define dmacHw_REG_CTL_DINC_MASK 0x00000180 /* Destination address inc/dec mask */ -#define dmacHw_REG_CTL_DINC_INC 0x00000000 /* Destination address increment */ -#define dmacHw_REG_CTL_DINC_DEC 0x00000080 /* Destination address decrement */ -#define dmacHw_REG_CTL_DINC_NC 0x00000100 /* Destination address no change */ - -#define dmacHw_REG_CTL_SINC_MASK 0x00000600 /* Source address inc/dec mask */ -#define dmacHw_REG_CTL_SINC_INC 0x00000000 /* Source address increment */ -#define dmacHw_REG_CTL_SINC_DEC 0x00000200 /* Source address decrement */ -#define dmacHw_REG_CTL_SINC_NC 0x00000400 /* Source address no change */ - -#define dmacHw_REG_CTL_DST_MSIZE_MASK 0x00003800 /* Destination burst transaction length */ -#define dmacHw_REG_CTL_DST_MSIZE_0 0x00000000 /* No Destination burst */ -#define dmacHw_REG_CTL_DST_MSIZE_4 0x00000800 /* Destination burst transaction length 4 */ -#define dmacHw_REG_CTL_DST_MSIZE_8 0x00001000 /* Destination burst transaction length 8 */ -#define dmacHw_REG_CTL_DST_MSIZE_16 0x00001800 /* Destination burst transaction length 16 */ - -#define dmacHw_REG_CTL_SRC_MSIZE_MASK 0x0001C000 /* Source burst transaction length */ -#define dmacHw_REG_CTL_SRC_MSIZE_0 0x00000000 /* No Source burst */ -#define dmacHw_REG_CTL_SRC_MSIZE_4 0x00004000 /* Source burst transaction length 4 */ -#define dmacHw_REG_CTL_SRC_MSIZE_8 0x00008000 /* Source burst transaction length 8 */ -#define dmacHw_REG_CTL_SRC_MSIZE_16 0x0000C000 /* Source burst transaction length 16 */ - -#define dmacHw_REG_CTL_TTFC_MASK 0x00700000 /* Transfer type and flow controller */ -#define dmacHw_REG_CTL_TTFC_MM_DMAC 0x00000000 /* Memory to Memory with DMAC as flow controller */ -#define dmacHw_REG_CTL_TTFC_MP_DMAC 0x00100000 /* Memory to Peripheral with DMAC as flow controller */ -#define dmacHw_REG_CTL_TTFC_PM_DMAC 0x00200000 /* Peripheral to Memory with DMAC as flow controller */ -#define dmacHw_REG_CTL_TTFC_PP_DMAC 0x00300000 /* Peripheral to Peripheral with DMAC as flow controller */ -#define dmacHw_REG_CTL_TTFC_PM_PERI 0x00400000 /* Peripheral to Memory with Peripheral as flow controller */ -#define dmacHw_REG_CTL_TTFC_PP_SPERI 0x00500000 /* Peripheral to Peripheral with Source Peripheral as flow controller */ -#define dmacHw_REG_CTL_TTFC_MP_PERI 0x00600000 /* Memory to Peripheral with Peripheral as flow controller */ -#define dmacHw_REG_CTL_TTFC_PP_DPERI 0x00700000 /* Peripheral to Peripheral with Destination Peripheral as flow controller */ - -#define dmacHw_REG_CTL_DMS_MASK 0x01800000 /* Destination AHB master interface */ -#define dmacHw_REG_CTL_DMS_1 0x00000000 /* Destination AHB master interface 1 */ -#define dmacHw_REG_CTL_DMS_2 0x00800000 /* Destination AHB master interface 2 */ - -#define dmacHw_REG_CTL_SMS_MASK 0x06000000 /* Source AHB master interface */ -#define dmacHw_REG_CTL_SMS_1 0x00000000 /* Source AHB master interface 1 */ -#define dmacHw_REG_CTL_SMS_2 0x02000000 /* Source AHB master interface 2 */ - -#define dmacHw_REG_CTL_LLP_DST_EN 0x08000000 /* Block chaining enable for destination side */ -#define dmacHw_REG_CTL_LLP_SRC_EN 0x10000000 /* Block chaining enable for source side */ - -/* Bit mask for REG_DMACx_CTL_HI */ -#define dmacHw_REG_CTL_BLOCK_TS_MASK 0x00000FFF /* Block transfer size */ -#define dmacHw_REG_CTL_DONE 0x00001000 /* Block trasnfer done */ - -/* Bit mask for REG_DMACx_CFG_LO */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_SHIFT 5 /* Channel priority shift */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_MASK 0x000000E0 /* Channel priority mask */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_0 0x00000000 /* Channel priority 0 */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_1 0x00000020 /* Channel priority 1 */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_2 0x00000040 /* Channel priority 2 */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_3 0x00000060 /* Channel priority 3 */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_4 0x00000080 /* Channel priority 4 */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_5 0x000000A0 /* Channel priority 5 */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_6 0x000000C0 /* Channel priority 6 */ -#define dmacHw_REG_CFG_LO_CH_PRIORITY_7 0x000000E0 /* Channel priority 7 */ - -#define dmacHw_REG_CFG_LO_CH_SUSPEND 0x00000100 /* Channel suspend */ -#define dmacHw_REG_CFG_LO_CH_FIFO_EMPTY 0x00000200 /* Channel FIFO empty */ -#define dmacHw_REG_CFG_LO_DST_CH_SW_HS 0x00000400 /* Destination channel SW handshaking */ -#define dmacHw_REG_CFG_LO_SRC_CH_SW_HS 0x00000800 /* Source channel SW handshaking */ - -#define dmacHw_REG_CFG_LO_CH_LOCK_MASK 0x00003000 /* Channel locking mask */ -#define dmacHw_REG_CFG_LO_CH_LOCK_DMA 0x00000000 /* Channel lock over the entire DMA transfer operation */ -#define dmacHw_REG_CFG_LO_CH_LOCK_BLOCK 0x00001000 /* Channel lock over the block transfer operation */ -#define dmacHw_REG_CFG_LO_CH_LOCK_TRANS 0x00002000 /* Channel lock over the transaction */ -#define dmacHw_REG_CFG_LO_CH_LOCK_ENABLE 0x00010000 /* Channel lock enable */ - -#define dmacHw_REG_CFG_LO_BUS_LOCK_MASK 0x0000C000 /* Bus locking mask */ -#define dmacHw_REG_CFG_LO_BUS_LOCK_DMA 0x00000000 /* Bus lock over the entire DMA transfer operation */ -#define dmacHw_REG_CFG_LO_BUS_LOCK_BLOCK 0x00004000 /* Bus lock over the block transfer operation */ -#define dmacHw_REG_CFG_LO_BUS_LOCK_TRANS 0x00008000 /* Bus lock over the transaction */ -#define dmacHw_REG_CFG_LO_BUS_LOCK_ENABLE 0x00020000 /* Bus lock enable */ - -#define dmacHw_REG_CFG_LO_DST_HS_POLARITY_LOW 0x00040000 /* Destination channel handshaking signal polarity low */ -#define dmacHw_REG_CFG_LO_SRC_HS_POLARITY_LOW 0x00080000 /* Source channel handshaking signal polarity low */ - -#define dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK 0x3FF00000 /* Maximum AMBA burst length */ - -#define dmacHw_REG_CFG_LO_AUTO_RELOAD_SRC 0x40000000 /* Source address auto reload */ -#define dmacHw_REG_CFG_LO_AUTO_RELOAD_DST 0x80000000 /* Destination address auto reload */ - -/* Bit mask for REG_DMACx_CFG_HI */ -#define dmacHw_REG_CFG_HI_FC_DST_READY 0x00000001 /* Source transaction request is serviced when destination is ready */ -#define dmacHw_REG_CFG_HI_FIFO_ENOUGH 0x00000002 /* Initiate burst transaction when enough data in available in FIFO */ - -#define dmacHw_REG_CFG_HI_AHB_HPROT_MASK 0x0000001C /* AHB protection mask */ -#define dmacHw_REG_CFG_HI_AHB_HPROT_1 0x00000004 /* AHB protection 1 */ -#define dmacHw_REG_CFG_HI_AHB_HPROT_2 0x00000008 /* AHB protection 2 */ -#define dmacHw_REG_CFG_HI_AHB_HPROT_3 0x00000010 /* AHB protection 3 */ - -#define dmacHw_REG_CFG_HI_UPDATE_DST_STAT 0x00000020 /* Destination status update enable */ -#define dmacHw_REG_CFG_HI_UPDATE_SRC_STAT 0x00000040 /* Source status update enable */ - -#define dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK 0x00000780 /* Source peripheral hardware interface mask */ -#define dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK 0x00007800 /* Destination peripheral hardware interface mask */ - -/* DMA Configuration Parameters */ -#define dmacHw_REG_COMP_PARAM_NUM_CHANNELS 0x00000700 /* Number of channels */ -#define dmacHw_REG_COMP_PARAM_NUM_INTERFACE 0x00001800 /* Number of master interface */ -#define dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE 0x0000000f /* Maximum brust size */ -#define dmacHw_REG_COMP_PARAM_DATA_WIDTH 0x00006000 /* Data transfer width */ - -/* Define GET/SET macros to program the registers */ -#define dmacHw_SET_SAR(module, channel, addr) (dmacHw_REG_SAR((module), (channel)) = (uint32_t) (addr)) -#define dmacHw_SET_DAR(module, channel, addr) (dmacHw_REG_DAR((module), (channel)) = (uint32_t) (addr)) -#define dmacHw_SET_LLP(module, channel, ptr) (dmacHw_REG_LLP((module), (channel)) = (uint32_t) (ptr)) - -#define dmacHw_GET_SSTAT(module, channel) (dmacHw_REG_SSTAT((module), (channel))) -#define dmacHw_GET_DSTAT(module, channel) (dmacHw_REG_DSTAT((module), (channel))) - -#define dmacHw_SET_SSTATAR(module, channel, addr) (dmacHw_REG_SSTATAR((module), (channel)) = (uint32_t) (addr)) -#define dmacHw_SET_DSTATAR(module, channel, addr) (dmacHw_REG_DSTATAR((module), (channel)) = (uint32_t) (addr)) - -#define dmacHw_SET_CONTROL_LO(module, channel, ctl) (dmacHw_REG_CTL_LO((module), (channel)) |= (ctl)) -#define dmacHw_RESET_CONTROL_LO(module, channel) (dmacHw_REG_CTL_LO((module), (channel)) = 0) -#define dmacHw_GET_CONTROL_LO(module, channel) (dmacHw_REG_CTL_LO((module), (channel))) - -#define dmacHw_SET_CONTROL_HI(module, channel, ctl) (dmacHw_REG_CTL_HI((module), (channel)) |= (ctl)) -#define dmacHw_RESET_CONTROL_HI(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) = 0) -#define dmacHw_GET_CONTROL_HI(module, channel) (dmacHw_REG_CTL_HI((module), (channel))) - -#define dmacHw_GET_BLOCK_SIZE(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_BLOCK_TS_MASK) -#define dmacHw_DMA_COMPLETE(module, channel) (dmacHw_REG_CTL_HI((module), (channel)) & dmacHw_REG_CTL_DONE) - -#define dmacHw_SET_CONFIG_LO(module, channel, cfg) (dmacHw_REG_CFG_LO((module), (channel)) |= (cfg)) -#define dmacHw_RESET_CONFIG_LO(module, channel) (dmacHw_REG_CFG_LO((module), (channel)) = 0) -#define dmacHw_GET_CONFIG_LO(module, channel) (dmacHw_REG_CFG_LO((module), (channel))) -#define dmacHw_SET_AMBA_BUSRT_LEN(module, channel, len) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) | (((len) << 20) & dmacHw_REG_CFG_LO_MAX_AMBA_BURST_LEN_MASK)) -#define dmacHw_SET_CHANNEL_PRIORITY(module, channel, prio) (dmacHw_REG_CFG_LO((module), (channel)) = (dmacHw_REG_CFG_LO((module), (channel)) & ~(dmacHw_REG_CFG_LO_CH_PRIORITY_MASK)) | (prio)) -#define dmacHw_SET_AHB_HPROT(module, channel, protect) (dmacHw_REG_CFG_HI(module, channel) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_AHB_HPROT_MASK)) | (protect)) - -#define dmacHw_SET_CONFIG_HI(module, channel, cfg) (dmacHw_REG_CFG_HI((module), (channel)) |= (cfg)) -#define dmacHw_RESET_CONFIG_HI(module, channel) (dmacHw_REG_CFG_HI((module), (channel)) = 0) -#define dmacHw_GET_CONFIG_HI(module, channel) (dmacHw_REG_CFG_HI((module), (channel))) -#define dmacHw_SET_SRC_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) | (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK)) -#define dmacHw_SRC_PERI_INTF(intf) (((intf) << 7) & dmacHw_REG_CFG_HI_SRC_PERI_INTF_MASK) -#define dmacHw_SET_DST_PERI_INTF(module, channel, intf) (dmacHw_REG_CFG_HI((module), (channel)) = (dmacHw_REG_CFG_HI((module), (channel)) & ~(dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) | (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK)) -#define dmacHw_DST_PERI_INTF(intf) (((intf) << 11) & dmacHw_REG_CFG_HI_DST_PERI_INTF_MASK) - -#define dmacHw_DMA_START(module, channel) (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel))) -#define dmacHw_DMA_STOP(module, channel) (dmacHw_REG_MISC_CH_ENABLE((module)) = (0x00000001 << ((channel) + 8))) -#define dmacHw_DMA_ENABLE(module) (dmacHw_REG_MISC_CFG((module)) = 1) -#define dmacHw_DMA_DISABLE(module) (dmacHw_REG_MISC_CFG((module)) = 0) - -#define dmacHw_TRAN_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel))) -#define dmacHw_BLOCK_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel))) -#define dmacHw_ERROR_INT_ENABLE(module, channel) (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8)) | (0x00000001 << (channel))) - -#define dmacHw_TRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_TRAN((module)) = (0x00000001 << ((channel) + 8))) -#define dmacHw_BLOCK_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_BLOCK((module)) = (0x00000001 << ((channel) + 8))) -#define dmacHw_ERROR_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_ERROR((module)) = (0x00000001 << ((channel) + 8))) -#define dmacHw_STRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_STRAN((module)) = (0x00000001 << ((channel) + 8))) -#define dmacHw_DTRAN_INT_DISABLE(module, channel) (dmacHw_REG_INT_MASK_DTRAN((module)) = (0x00000001 << ((channel) + 8))) - -#define dmacHw_TRAN_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_TRAN((module)) = (0x00000001 << (channel))) -#define dmacHw_BLOCK_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_BLOCK((module)) = (0x00000001 << (channel))) -#define dmacHw_ERROR_INT_CLEAR(module, channel) (dmacHw_REG_INT_CLEAR_ERROR((module)) = (0x00000001 << (channel))) - -#define dmacHw_GET_NUM_CHANNEL(module) (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_CHANNELS) >> 8) + 1) -#define dmacHw_GET_NUM_INTERFACE(module) (((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_NUM_INTERFACE) >> 11) + 1) -#define dmacHw_GET_MAX_BLOCK_SIZE(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_LO((module)) >> (4 * (channel))) & dmacHw_REG_COMP_PARAM_MAX_BLK_SIZE) -#define dmacHw_GET_CHANNEL_DATA_WIDTH(module, channel) ((dmacHw_REG_MISC_COMP_PARAM1_HI((module)) & dmacHw_REG_COMP_PARAM_DATA_WIDTH) >> 13) - -#endif /* _DMACHW_REG_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h b/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h deleted file mode 100644 index cfa91bed9d3477303c4462855f2609177b8859a0..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/hw_cfg.h +++ /dev/null @@ -1,73 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - - -#ifndef CSP_HW_CFG_H -#define CSP_HW_CFG_H - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include - -#if defined(__KERNEL__) -#include -#else -#include -#endif - -/* Some items that can be defined externally, but will be set to default values */ -/* if they are not defined. */ -/* HW_CFG_PLL_SPREAD_SPECTRUM_DISABLE Default undefined and SS is enabled. */ -/* HW_CFG_SDRAM_CAS_LATENCY 5 Default 5, Values [3..6] */ -/* HW_CFG_SDRAM_CHIP_SELECT_CNT 1 Default 1, Vaules [1..2] */ -/* HW_CFG_SDRAM_SPEED_GRADE 667 Default 667, Values [400,533,667,800] */ -/* HW_CFG_SDRAM_WIDTH_BITS 16 Default 16, Vaules [8,16] */ -/* HW_CFG_SDRAM_ADDR_BRC Default undefined and Row-Bank-Col (RBC) addressing used. Define to use Bank-Row-Col (BRC). */ -/* HW_CFG_SDRAM_CLK_ASYNC Default undefined and DDR clock is synchronous with AXI BUS clock. Define for ASYNC mode. */ - -#if defined(CFG_GLOBAL_CHIP) - #if (CFG_GLOBAL_CHIP == FPGA11107) - #define HW_CFG_BUS_CLK_HZ 5000000 - #define HW_CFG_DDR_CTLR_CLK_HZ 10000000 - #define HW_CFG_DDR_PHY_OMIT - #define HW_CFG_UART_CLK_HZ 7500000 - #else - #define HW_CFG_PLL_VCO_HZ 2000000000 - #define HW_CFG_PLL2_VCO_HZ 1800000000 - #define HW_CFG_ARM_CLK_HZ CAP_HW_CFG_ARM_CLK_HZ - #define HW_CFG_BUS_CLK_HZ 166666666 - #define HW_CFG_DDR_CTLR_CLK_HZ 333333333 - #define HW_CFG_DDR_PHY_CLK_HZ (2 * HW_CFG_DDR_CTLR_CLK_HZ) - #define HW_CFG_UART_CLK_HZ 142857142 - #define HW_CFG_VPM_CLK_HZ CAP_HW_CFG_VPM_CLK_HZ - #endif -#else - #define HW_CFG_PLL_VCO_HZ 1800000000 - #define HW_CFG_PLL2_VCO_HZ 1800000000 - #define HW_CFG_ARM_CLK_HZ 450000000 - #define HW_CFG_BUS_CLK_HZ 150000000 - #define HW_CFG_DDR_CTLR_CLK_HZ 300000000 - #define HW_CFG_DDR_PHY_CLK_HZ (2 * HW_CFG_DDR_CTLR_CLK_HZ) - #define HW_CFG_UART_CLK_HZ 150000000 - #define HW_CFG_VPM_CLK_HZ 300000000 -#endif - -/* ---- Public Constants and Types --------------------------------------- */ -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - - -#endif /* CSP_HW_CFG_H */ - diff --git a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h deleted file mode 100644 index 0aeb6a6fe7f8917b206993364455947564a78778..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/intcHw_reg.h +++ /dev/null @@ -1,246 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file intcHw_reg.h -* -* @brief platform specific interrupt controller bit assignments -* -* @note -* None -*/ -/****************************************************************************/ - -#ifndef _INTCHW_REG_H -#define _INTCHW_REG_H - -/* ---- Include Files ---------------------------------------------------- */ -#include -#include -#include - -/* ---- Public Constants and Types --------------------------------------- */ - -#define INTCHW_NUM_IRQ_PER_INTC 32 /* Maximum number of interrupt controllers */ -#define INTCHW_NUM_INTC 3 - -/* Defines for interrupt controllers. This simplifies and cleans up the function calls. */ -#define INTCHW_INTC0 ((void *)MM_IO_BASE_INTC0) -#define INTCHW_INTC1 ((void *)MM_IO_BASE_INTC1) -#define INTCHW_SINTC ((void *)MM_IO_BASE_SINTC) - -/* INTC0 - interrupt controller 0 */ -#define INTCHW_INTC0_PIF_BITNUM 31 /* Peripheral interface interrupt */ -#define INTCHW_INTC0_CLCD_BITNUM 30 /* LCD Controller interrupt */ -#define INTCHW_INTC0_GE_BITNUM 29 /* Graphic engine interrupt */ -#define INTCHW_INTC0_APM_BITNUM 28 /* Audio process module interrupt */ -#define INTCHW_INTC0_ESW_BITNUM 27 /* Ethernet switch interrupt */ -#define INTCHW_INTC0_SPIH_BITNUM 26 /* SPI host interrupt */ -#define INTCHW_INTC0_TIMER3_BITNUM 25 /* Timer3 interrupt */ -#define INTCHW_INTC0_TIMER2_BITNUM 24 /* Timer2 interrupt */ -#define INTCHW_INTC0_TIMER1_BITNUM 23 /* Timer1 interrupt */ -#define INTCHW_INTC0_TIMER0_BITNUM 22 /* Timer0 interrupt */ -#define INTCHW_INTC0_SDIOH1_BITNUM 21 /* SDIO1 host interrupt */ -#define INTCHW_INTC0_SDIOH0_BITNUM 20 /* SDIO0 host interrupt */ -#define INTCHW_INTC0_USBD_BITNUM 19 /* USB device interrupt */ -#define INTCHW_INTC0_USBH1_BITNUM 18 /* USB1 host interrupt */ -#define INTCHW_INTC0_USBHD2_BITNUM 17 /* USB host2/device2 interrupt */ -#define INTCHW_INTC0_VPM_BITNUM 16 /* Voice process module interrupt */ -#define INTCHW_INTC0_DMA1C7_BITNUM 15 /* DMA1 channel 7 interrupt */ -#define INTCHW_INTC0_DMA1C6_BITNUM 14 /* DMA1 channel 6 interrupt */ -#define INTCHW_INTC0_DMA1C5_BITNUM 13 /* DMA1 channel 5 interrupt */ -#define INTCHW_INTC0_DMA1C4_BITNUM 12 /* DMA1 channel 4 interrupt */ -#define INTCHW_INTC0_DMA1C3_BITNUM 11 /* DMA1 channel 3 interrupt */ -#define INTCHW_INTC0_DMA1C2_BITNUM 10 /* DMA1 channel 2 interrupt */ -#define INTCHW_INTC0_DMA1C1_BITNUM 9 /* DMA1 channel 1 interrupt */ -#define INTCHW_INTC0_DMA1C0_BITNUM 8 /* DMA1 channel 0 interrupt */ -#define INTCHW_INTC0_DMA0C7_BITNUM 7 /* DMA0 channel 7 interrupt */ -#define INTCHW_INTC0_DMA0C6_BITNUM 6 /* DMA0 channel 6 interrupt */ -#define INTCHW_INTC0_DMA0C5_BITNUM 5 /* DMA0 channel 5 interrupt */ -#define INTCHW_INTC0_DMA0C4_BITNUM 4 /* DMA0 channel 4 interrupt */ -#define INTCHW_INTC0_DMA0C3_BITNUM 3 /* DMA0 channel 3 interrupt */ -#define INTCHW_INTC0_DMA0C2_BITNUM 2 /* DMA0 channel 2 interrupt */ -#define INTCHW_INTC0_DMA0C1_BITNUM 1 /* DMA0 channel 1 interrupt */ -#define INTCHW_INTC0_DMA0C0_BITNUM 0 /* DMA0 channel 0 interrupt */ - -#define INTCHW_INTC0_PIF (1< -#endif - -/* ---- Public Constants and Types --------------------------------------- */ - -/* Memory Map address definitions */ - -#define MM_ADDR_DDR 0x00000000 - -#define MM_ADDR_IO_VPM_EXTMEM_RSVD 0x0F000000 /* 16 MB - Reserved external memory for VPM use */ - -#define MM_ADDR_IO_FLASHC 0x20000000 -#define MM_ADDR_IO_BROM 0x30000000 -#define MM_ADDR_IO_ARAM 0x30100000 /* 64 KB - extra cycle latency - WS switch */ -#define MM_ADDR_IO_DMA0 0x30200000 -#define MM_ADDR_IO_DMA1 0x30300000 -#define MM_ADDR_IO_ESW 0x30400000 -#define MM_ADDR_IO_CLCD 0x30500000 -#define MM_ADDR_IO_PIF 0x30580000 -#define MM_ADDR_IO_APM 0x30600000 -#define MM_ADDR_IO_SPUM 0x30700000 -#define MM_ADDR_IO_VPM_PROG 0x30800000 -#define MM_ADDR_IO_VPM_DATA 0x30A00000 -#define MM_ADDR_IO_VRAM 0x40000000 /* 64 KB - security block in front of it */ -#define MM_ADDR_IO_CHIPC 0x80000000 -#define MM_ADDR_IO_UMI 0x80001000 -#define MM_ADDR_IO_NAND 0x80001800 -#define MM_ADDR_IO_LEDM 0x80002000 -#define MM_ADDR_IO_PWM 0x80002040 -#define MM_ADDR_IO_VINTC 0x80003000 -#define MM_ADDR_IO_GPIO0 0x80004000 -#define MM_ADDR_IO_GPIO1 0x80004800 -#define MM_ADDR_IO_I2CS 0x80005000 -#define MM_ADDR_IO_SPIS 0x80006000 -#define MM_ADDR_IO_HPM 0x80007400 -#define MM_ADDR_IO_HPM_REMAP 0x80007800 -#define MM_ADDR_IO_TZPC 0x80008000 -#define MM_ADDR_IO_MPU 0x80009000 -#define MM_ADDR_IO_SPUMP 0x8000a000 -#define MM_ADDR_IO_PKA 0x8000b000 -#define MM_ADDR_IO_RNG 0x8000c000 -#define MM_ADDR_IO_KEYC 0x8000d000 -#define MM_ADDR_IO_BBL 0x8000e000 -#define MM_ADDR_IO_OTP 0x8000f000 -#define MM_ADDR_IO_I2S0 0x80010000 -#define MM_ADDR_IO_I2S1 0x80011000 -#define MM_ADDR_IO_UARTA 0x80012000 -#define MM_ADDR_IO_UARTB 0x80013000 -#define MM_ADDR_IO_I2CH 0x80014020 -#define MM_ADDR_IO_SPIH 0x80015000 -#define MM_ADDR_IO_TSC 0x80016000 -#define MM_ADDR_IO_TMR 0x80017000 -#define MM_ADDR_IO_WATCHDOG 0x80017800 -#define MM_ADDR_IO_ETM 0x80018000 -#define MM_ADDR_IO_DDRC 0x80019000 -#define MM_ADDR_IO_SINTC 0x80100000 -#define MM_ADDR_IO_INTC0 0x80200000 -#define MM_ADDR_IO_INTC1 0x80201000 -#define MM_ADDR_IO_GE 0x80300000 -#define MM_ADDR_IO_USB_CTLR0 0x80400000 -#define MM_ADDR_IO_USB_CTLR1 0x80410000 -#define MM_ADDR_IO_USB_PHY 0x80420000 -#define MM_ADDR_IO_SDIOH0 0x80500000 -#define MM_ADDR_IO_SDIOH1 0x80600000 -#define MM_ADDR_IO_VDEC 0x80700000 - -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* _MM_ADDR_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h b/arch/arm/mach-bcmring/include/mach/csp/mm_io.h deleted file mode 100644 index de92ec6a01aa4136a2862732703d475ba4dfc517..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/mm_io.h +++ /dev/null @@ -1,147 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file mm_io.h -* -* @brief Memory Map I/O definitions -* -* @note -* None -*/ -/****************************************************************************/ - -#ifndef _MM_IO_H -#define _MM_IO_H - -/* ---- Include Files ---------------------------------------------------- */ -#include - -#if !defined(CSP_SIMULATION) -#include -#endif - -/* ---- Public Constants and Types --------------------------------------- */ - -#if defined(CONFIG_MMU) - -/* This macro is referenced in - * Phys to Virtual 0xNyxxxxxx => 0xFNxxxxxx - * This macro is referenced in - * - * Assume VPM address is the last x MB of memory. For VPM, map to - * 0xf0000000 and up. - */ - -#ifndef MM_IO_PHYS_TO_VIRT -#ifdef __ASSEMBLY__ -#define MM_IO_PHYS_TO_VIRT(phys) (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF)) -#else -#define MM_IO_PHYS_TO_VIRT(phys) (((phys) == MM_ADDR_IO_VPM_EXTMEM_RSVD) ? 0xF0000000 : \ - (0xF0000000 | (((phys) >> 4) & 0x0F000000) | ((phys) & 0xFFFFFF))) -#endif -#endif - -/* Virtual to Physical 0xFNxxxxxx => 0xN0xxxxxx */ - -#ifndef MM_IO_VIRT_TO_PHYS -#ifdef __ASSEMBLY__ -#define MM_IO_VIRT_TO_PHYS(virt) ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF)) -#else -#define MM_IO_VIRT_TO_PHYS(virt) (((virt) == 0xF0000000) ? MM_ADDR_IO_VPM_EXTMEM_RSVD : \ - ((((virt) & 0x0F000000) << 4) | ((virt) & 0xFFFFFF))) -#endif -#endif - -#else - -#ifndef MM_IO_PHYS_TO_VIRT -#define MM_IO_PHYS_TO_VIRT(phys) (phys) -#endif - -#ifndef MM_IO_VIRT_TO_PHYS -#define MM_IO_VIRT_TO_PHYS(virt) (virt) -#endif - -#endif - -/* Registers in 0xExxxxxxx that should be moved to 0xFxxxxxxx */ -#define MM_IO_BASE_FLASHC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_FLASHC) -#define MM_IO_BASE_NAND MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_NAND) -#define MM_IO_BASE_UMI MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UMI) - -#define MM_IO_START MM_ADDR_IO_FLASHC /* Physical beginning of IO mapped memory */ -#define MM_IO_BASE MM_IO_BASE_FLASHC /* Virtual beginning of IO mapped memory */ - -#define MM_IO_BASE_BROM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BROM) -#define MM_IO_BASE_ARAM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ARAM) -#define MM_IO_BASE_DMA0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA0) -#define MM_IO_BASE_DMA1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DMA1) -#define MM_IO_BASE_ESW MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ESW) -#define MM_IO_BASE_CLCD MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CLCD) -#define MM_IO_BASE_PIF MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PIF) -#define MM_IO_BASE_APM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_APM) -#define MM_IO_BASE_SPUM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUM) -#define MM_IO_BASE_VPM_PROG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_PROG) -#define MM_IO_BASE_VPM_DATA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_DATA) - -#define MM_IO_BASE_VRAM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VRAM) - -#define MM_IO_BASE_CHIPC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_CHIPC) -#define MM_IO_BASE_DDRC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_DDRC) -#define MM_IO_BASE_LEDM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_LEDM) -#define MM_IO_BASE_PWM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PWM) -#define MM_IO_BASE_VINTC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VINTC) -#define MM_IO_BASE_GPIO0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO0) -#define MM_IO_BASE_GPIO1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GPIO1) -#define MM_IO_BASE_TMR MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TMR) -#define MM_IO_BASE_WATCHDOG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_WATCHDOG) -#define MM_IO_BASE_ETM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_ETM) -#define MM_IO_BASE_HPM MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM) -#define MM_IO_BASE_HPM_REMAP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_HPM_REMAP) -#define MM_IO_BASE_TZPC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TZPC) -#define MM_IO_BASE_MPU MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_MPU) -#define MM_IO_BASE_SPUMP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPUMP) -#define MM_IO_BASE_PKA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_PKA) -#define MM_IO_BASE_RNG MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_RNG) -#define MM_IO_BASE_KEYC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_KEYC) -#define MM_IO_BASE_BBL MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_BBL) -#define MM_IO_BASE_OTP MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_OTP) -#define MM_IO_BASE_I2S0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S0) -#define MM_IO_BASE_I2S1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2S1) -#define MM_IO_BASE_UARTA MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTA) -#define MM_IO_BASE_UARTB MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_UARTB) -#define MM_IO_BASE_I2CH MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CH) -#define MM_IO_BASE_SPIH MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIH) -#define MM_IO_BASE_TSC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_TSC) -#define MM_IO_BASE_I2CS MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_I2CS) -#define MM_IO_BASE_SPIS MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SPIS) -#define MM_IO_BASE_SINTC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SINTC) -#define MM_IO_BASE_INTC0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC0) -#define MM_IO_BASE_INTC1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_INTC1) -#define MM_IO_BASE_GE MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_GE) -#define MM_IO_BASE_USB_CTLR0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR0) -#define MM_IO_BASE_USB_CTLR1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_CTLR1) -#define MM_IO_BASE_USB_PHY MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_USB_PHY) -#define MM_IO_BASE_SDIOH0 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH0) -#define MM_IO_BASE_SDIOH1 MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_SDIOH1) -#define MM_IO_BASE_VDEC MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VDEC) - -#define MM_IO_BASE_VPM_EXTMEM_RSVD MM_IO_PHYS_TO_VIRT(MM_ADDR_IO_VPM_EXTMEM_RSVD) - -/* ---- Public Variable Externs ------------------------------------------ */ -/* ---- Public Function Prototypes --------------------------------------- */ - -#endif /* _MM_IO_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h deleted file mode 100644 index d15f5f3ec2d8d68d8801bb694ddddb5e0f8418d7..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/secHw_def.h +++ /dev/null @@ -1,100 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file secHw_def.h -* -* @brief Definitions for configuring/testing secure blocks -* -* @note -* None -*/ -/****************************************************************************/ - -#ifndef SECHW_DEF_H -#define SECHW_DEF_H - -#include - -/* Bit mask for various secure device */ -#define secHw_BLK_MASK_CHIP_CONTROL 0x00000001 -#define secHw_BLK_MASK_KEY_SCAN 0x00000002 -#define secHw_BLK_MASK_TOUCH_SCREEN 0x00000004 -#define secHw_BLK_MASK_UART0 0x00000008 -#define secHw_BLK_MASK_UART1 0x00000010 -#define secHw_BLK_MASK_WATCHDOG 0x00000020 -#define secHw_BLK_MASK_SPUM 0x00000040 -#define secHw_BLK_MASK_DDR2 0x00000080 -#define secHw_BLK_MASK_EXT_MEM 0x00000100 -#define secHw_BLK_MASK_ESW 0x00000200 -#define secHw_BLK_MASK_SPU 0x00010000 -#define secHw_BLK_MASK_PKA 0x00020000 -#define secHw_BLK_MASK_RNG 0x00040000 -#define secHw_BLK_MASK_RTC 0x00080000 -#define secHw_BLK_MASK_OTP 0x00100000 -#define secHw_BLK_MASK_BOOT 0x00200000 -#define secHw_BLK_MASK_MPU 0x00400000 -#define secHw_BLK_MASK_TZCTRL 0x00800000 -#define secHw_BLK_MASK_INTR 0x01000000 - -/* Trustzone register set */ -typedef struct { - volatile uint32_t status; /* read only - reflects status of writes of 2 write registers */ - volatile uint32_t setUnsecure; /* write only. reads back as 0 */ - volatile uint32_t setSecure; /* write only. reads back as 0 */ -} secHw_TZREG_t; - -/* There are 2 register sets. The first is for the lower 16 bits, the 2nd */ -/* is for the higher 16 bits. */ - -typedef enum { - secHw_IDX_LS = 0, - secHw_IDX_MS = 1, - secHw_IDX_NUM -} secHw_IDX_e; - -typedef struct { - volatile secHw_TZREG_t reg[secHw_IDX_NUM]; -} secHw_REGS_t; - -/****************************************************************************/ -/** -* @brief Configures a device as a secure device -* -*/ -/****************************************************************************/ -static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Configures a device as a non-secure device -* -*/ -/****************************************************************************/ -static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */ - ); - -/****************************************************************************/ -/** -* @brief Get the trustzone status for all components. 1 = non-secure, 0 = secure -* -*/ -/****************************************************************************/ -static inline uint32_t secHw_getStatus(void); - -#include - -#endif /* SECHW_DEF_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h b/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h deleted file mode 100644 index 9cd6a032ab716394dba50986a3a72b2da55f7bd4..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/secHw_inline.h +++ /dev/null @@ -1,79 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file secHw_inline.h -* -* @brief Definitions for configuring/testing secure blocks -* -* @note -* None -*/ -/****************************************************************************/ - -#ifndef SECHW_INLINE_H -#define SECHW_INLINE_H - -/****************************************************************************/ -/** -* @brief Configures a device as a secure device -* -*/ -/****************************************************************************/ -static inline void secHw_setSecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */ - ) { - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; - - if (mask & 0x0000FFFF) { - regp->reg[secHw_IDX_LS].setSecure = mask & 0x0000FFFF; - } - - if (mask & 0xFFFF0000) { - regp->reg[secHw_IDX_MS].setSecure = mask >> 16; - } -} - -/****************************************************************************/ -/** -* @brief Configures a device as a non-secure device -* -*/ -/****************************************************************************/ -static inline void secHw_setUnsecure(uint32_t mask /* mask of type secHw_BLK_MASK_XXXXXX */ - ) { - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; - - if (mask & 0x0000FFFF) { - regp->reg[secHw_IDX_LS].setUnsecure = mask & 0x0000FFFF; - } - if (mask & 0xFFFF0000) { - regp->reg[secHw_IDX_MS].setUnsecure = mask >> 16; - } -} - -/****************************************************************************/ -/** -* @brief Get the trustzone status for all components. 1 = non-secure, 0 = secure -* -*/ -/****************************************************************************/ -static inline uint32_t secHw_getStatus(void) -{ - secHw_REGS_t *regp = (secHw_REGS_t *) MM_IO_BASE_TZPC; - - return (regp->reg[1].status << 16) + regp->reg[0].status; -} - -#endif /* SECHW_INLINE_H */ diff --git a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h b/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h deleted file mode 100644 index 3080ac7239a10e582d8dac9a1a6947692edadfb6..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/csp/tmrHw_reg.h +++ /dev/null @@ -1,82 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file tmrHw_reg.h -* -* @brief Definitions for low level Timer registers -* -*/ -/****************************************************************************/ -#ifndef _TMRHW_REG_H -#define _TMRHW_REG_H - -#include -#include -/* Base address */ -#define tmrHw_MODULE_BASE_ADDR MM_IO_BASE_TMR - -/* -This platform has four different timers running at different clock speed - -Timer one (Timer ID 0) runs at 25 MHz -Timer two (Timer ID 1) runs at 25 MHz -Timer three (Timer ID 2) runs at 150 MHz -Timer four (Timer ID 3) runs at 150 MHz -*/ -#define tmrHw_LOW_FREQUENCY_MHZ 25 /* Always 25MHz from XTAL */ -#define tmrHw_LOW_FREQUENCY_HZ 25000000 - -#if defined(CFG_GLOBAL_CHIP) && (CFG_GLOBAL_CHIP == FPGA11107) -#define tmrHw_HIGH_FREQUENCY_MHZ 150 /* Always 150MHz for FPGA */ -#define tmrHw_HIGH_FREQUENCY_HZ 150000000 -#else -#define tmrHw_HIGH_FREQUENCY_HZ HW_CFG_BUS_CLK_HZ -#define tmrHw_HIGH_FREQUENCY_MHZ (HW_CFG_BUS_CLK_HZ / 1000000) -#endif - -#define tmrHw_LOW_RESOLUTION_CLOCK tmrHw_LOW_FREQUENCY_HZ -#define tmrHw_HIGH_RESOLUTION_CLOCK tmrHw_HIGH_FREQUENCY_HZ -#define tmrHw_MAX_COUNT (0xFFFFFFFF) /* maximum number of count a timer can count */ -#define tmrHw_TIMER_NUM_COUNT (4) /* Number of timer module supported */ - -typedef struct { - uint32_t LoadValue; /* Load value for timer */ - uint32_t CurrentValue; /* Current value for timer */ - uint32_t Control; /* Control register */ - uint32_t InterruptClear; /* Interrupt clear register */ - uint32_t RawInterruptStatus; /* Raw interrupt status */ - uint32_t InterruptStatus; /* Masked interrupt status */ - uint32_t BackgroundLoad; /* Background load value */ - uint32_t padding; /* Padding register */ -} tmrHw_REG_t; - -/* Control bot masks */ -#define tmrHw_CONTROL_TIMER_ENABLE 0x00000080 -#define tmrHw_CONTROL_PERIODIC 0x00000040 -#define tmrHw_CONTROL_INTERRUPT_ENABLE 0x00000020 -#define tmrHw_CONTROL_PRESCALE_MASK 0x0000000C -#define tmrHw_CONTROL_PRESCALE_1 0x00000000 -#define tmrHw_CONTROL_PRESCALE_16 0x00000004 -#define tmrHw_CONTROL_PRESCALE_256 0x00000008 -#define tmrHw_CONTROL_32BIT 0x00000002 -#define tmrHw_CONTROL_ONESHOT 0x00000001 -#define tmrHw_CONTROL_FREE_RUNNING 0x00000000 - -#define tmrHw_CONTROL_MODE_MASK (tmrHw_CONTROL_PERIODIC | tmrHw_CONTROL_ONESHOT) - -#define pTmrHw ((volatile tmrHw_REG_t *)tmrHw_MODULE_BASE_ADDR) - -#endif /* _TMRHW_REG_H */ diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h deleted file mode 100644 index 72543781207b2f2a70e5bfbe5d84f44bec3239a7..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/dma.h +++ /dev/null @@ -1,630 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/****************************************************************************/ -/** -* @file dma.h -* -* @brief API definitions for the linux DMA interface. -*/ -/****************************************************************************/ - -#if !defined(ASM_ARM_ARCH_BCMRING_DMA_H) -#define ASM_ARM_ARCH_BCMRING_DMA_H - -/* ---- Include Files ---------------------------------------------------- */ - -#include -#include -#include -#include - -/* ---- Constants and Types ---------------------------------------------- */ - -/* If DMA_DEBUG_TRACK_RESERVATION is set to a non-zero value, then the filename */ -/* and line number of the reservation request will be recorded in the channel table */ - -#define DMA_DEBUG_TRACK_RESERVATION 1 - -#define DMA_NUM_CONTROLLERS 2 -#define DMA_NUM_CHANNELS 8 /* per controller */ - -typedef enum { - DMA_DEVICE_MEM_TO_MEM, /* For memory to memory transfers */ - DMA_DEVICE_I2S0_DEV_TO_MEM, - DMA_DEVICE_I2S0_MEM_TO_DEV, - DMA_DEVICE_I2S1_DEV_TO_MEM, - DMA_DEVICE_I2S1_MEM_TO_DEV, - DMA_DEVICE_APM_CODEC_A_DEV_TO_MEM, - DMA_DEVICE_APM_CODEC_A_MEM_TO_DEV, - DMA_DEVICE_APM_CODEC_B_DEV_TO_MEM, - DMA_DEVICE_APM_CODEC_B_MEM_TO_DEV, - DMA_DEVICE_APM_CODEC_C_DEV_TO_MEM, /* Additional mic input for beam-forming */ - DMA_DEVICE_APM_PCM0_DEV_TO_MEM, - DMA_DEVICE_APM_PCM0_MEM_TO_DEV, - DMA_DEVICE_APM_PCM1_DEV_TO_MEM, - DMA_DEVICE_APM_PCM1_MEM_TO_DEV, - DMA_DEVICE_SPUM_DEV_TO_MEM, - DMA_DEVICE_SPUM_MEM_TO_DEV, - DMA_DEVICE_SPIH_DEV_TO_MEM, - DMA_DEVICE_SPIH_MEM_TO_DEV, - DMA_DEVICE_UART_A_DEV_TO_MEM, - DMA_DEVICE_UART_A_MEM_TO_DEV, - DMA_DEVICE_UART_B_DEV_TO_MEM, - DMA_DEVICE_UART_B_MEM_TO_DEV, - DMA_DEVICE_PIF_MEM_TO_DEV, - DMA_DEVICE_PIF_DEV_TO_MEM, - DMA_DEVICE_ESW_DEV_TO_MEM, - DMA_DEVICE_ESW_MEM_TO_DEV, - DMA_DEVICE_VPM_MEM_TO_MEM, - DMA_DEVICE_CLCD_MEM_TO_MEM, - DMA_DEVICE_NAND_MEM_TO_MEM, - DMA_DEVICE_MEM_TO_VRAM, - DMA_DEVICE_VRAM_TO_MEM, - - /* Add new entries before this line. */ - - DMA_NUM_DEVICE_ENTRIES, - DMA_DEVICE_NONE = 0xff, /* Special value to indicate that no device is currently assigned. */ - -} DMA_Device_t; - -/**************************************************************************** -* -* The DMA_Handle_t is the primary object used by callers of the API. -* -*****************************************************************************/ - -#define DMA_INVALID_HANDLE ((DMA_Handle_t) -1) - -typedef int DMA_Handle_t; - -/**************************************************************************** -* -* The DMA_DescriptorRing_t contains a ring of descriptors which is used -* to point to regions of memory. -* -*****************************************************************************/ - -typedef struct { - void *virtAddr; /* Virtual Address of the descriptor ring */ - dma_addr_t physAddr; /* Physical address of the descriptor ring */ - int descriptorsAllocated; /* Number of descriptors allocated in the descriptor ring */ - size_t bytesAllocated; /* Number of bytes allocated in the descriptor ring */ - -} DMA_DescriptorRing_t; - -/**************************************************************************** -* -* The DMA_DeviceAttribute_t contains information which describes a -* particular DMA device (or peripheral). -* -* It is anticipated that the arrary of DMA_DeviceAttribute_t's will be -* statically initialized. -* -*****************************************************************************/ - -/* The device handler is called whenever a DMA operation completes. The reaon */ -/* for it to be called will be a bitmask with one or more of the following bits */ -/* set. */ - -#define DMA_HANDLER_REASON_BLOCK_COMPLETE dmacHw_INTERRUPT_STATUS_BLOCK -#define DMA_HANDLER_REASON_TRANSFER_COMPLETE dmacHw_INTERRUPT_STATUS_TRANS -#define DMA_HANDLER_REASON_ERROR dmacHw_INTERRUPT_STATUS_ERROR - -typedef void (*DMA_DeviceHandler_t) (DMA_Device_t dev, int reason, - void *userData); - -#define DMA_DEVICE_FLAG_ON_DMA0 0x00000001 -#define DMA_DEVICE_FLAG_ON_DMA1 0x00000002 -#define DMA_DEVICE_FLAG_PORT_PER_DMAC 0x00000004 /* If set, it means that the port used on DMAC0 is different from the port used on DMAC1 */ -#define DMA_DEVICE_FLAG_ALLOC_DMA1_FIRST 0x00000008 /* If set, allocate from DMA1 before allocating from DMA0 */ -#define DMA_DEVICE_FLAG_IS_DEDICATED 0x00000100 -#define DMA_DEVICE_FLAG_NO_ISR 0x00000200 -#define DMA_DEVICE_FLAG_ALLOW_LARGE_FIFO 0x00000400 -#define DMA_DEVICE_FLAG_IN_USE 0x00000800 /* If set, device is in use on a channel */ - -/* Note: Some DMA devices can be used from multiple DMA Controllers. The bitmask is used to */ -/* determine which DMA controllers a given device can be used from, and the interface */ -/* array determeines the actual interface number to use for a given controller. */ - -typedef struct { - uint32_t flags; /* Bitmask of DMA_DEVICE_FLAG_xxx constants */ - uint8_t dedicatedController; /* Controller number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */ - uint8_t dedicatedChannel; /* Channel number to use if DMA_DEVICE_FLAG_IS_DEDICATED is set. */ - const char *name; /* Will show up in the /proc entry */ - - uint32_t dmacPort[DMA_NUM_CONTROLLERS]; /* Specifies the port number when DMA_DEVICE_FLAG_PORT_PER_DMAC flag is set */ - - dmacHw_CONFIG_t config; /* Configuration to use when DMA'ing using this device */ - - void *userData; /* Passed to the devHandler */ - DMA_DeviceHandler_t devHandler; /* Called when DMA operations finish. */ - - timer_tick_count_t transferStartTime; /* Time the current transfer was started */ - - /* The following statistical information will be collected and presented in a proc entry. */ - /* Note: With a contiuous bandwidth of 1 Gb/sec, it would take 584 years to overflow */ - /* a 64 bit counter. */ - - uint64_t numTransfers; /* Number of DMA transfers performed */ - uint64_t transferTicks; /* Total time spent doing DMA transfers (measured in timer_tick_count_t's) */ - uint64_t transferBytes; /* Total bytes transferred */ - uint32_t timesBlocked; /* Number of times a channel was unavailable */ - uint32_t numBytes; /* Last transfer size */ - - /* It's not possible to free memory which is allocated for the descriptors from within */ - /* the ISR. So make the presumption that a given device will tend to use the */ - /* same sized buffers over and over again, and we keep them around. */ - - DMA_DescriptorRing_t ring; /* Ring of descriptors allocated for this device */ - - /* We stash away some of the information from the previous transfer. If back-to-back */ - /* transfers are performed from the same buffer, then we don't have to keep re-initializing */ - /* the descriptor buffers. */ - - uint32_t prevNumBytes; - dma_addr_t prevSrcData; - dma_addr_t prevDstData; - -} DMA_DeviceAttribute_t; - -/**************************************************************************** -* -* DMA_Channel_t, DMA_Controller_t, and DMA_State_t are really internal -* data structures and don't belong in this header file, but are included -* merely for discussion. -* -* By the time this is implemented, these structures will be moved out into -* the appropriate C source file instead. -* -*****************************************************************************/ - -/**************************************************************************** -* -* The DMA_Channel_t contains state information about each DMA channel. Some -* of the channels are dedicated. Non-dedicated channels are shared -* amongst the other devices. -* -*****************************************************************************/ - -#define DMA_CHANNEL_FLAG_IN_USE 0x00000001 -#define DMA_CHANNEL_FLAG_IS_DEDICATED 0x00000002 -#define DMA_CHANNEL_FLAG_NO_ISR 0x00000004 -#define DMA_CHANNEL_FLAG_LARGE_FIFO 0x00000008 - -typedef struct { - uint32_t flags; /* bitmask of DMA_CHANNEL_FLAG_xxx constants */ - DMA_Device_t devType; /* Device this channel is currently reserved for */ - DMA_Device_t lastDevType; /* Device type that used this previously */ - char name[20]; /* Name passed onto request_irq */ - -#if (DMA_DEBUG_TRACK_RESERVATION) - const char *fileName; /* Place where channel reservation took place */ - int lineNum; /* Place where channel reservation took place */ -#endif - dmacHw_HANDLE_t dmacHwHandle; /* low level channel handle. */ - -} DMA_Channel_t; - -/**************************************************************************** -* -* The DMA_Controller_t contains state information about each DMA controller. -* -* The freeChannelQ is stored in the controller data structure rather than -* the channel data structure since several of the devices are accessible -* from multiple controllers, and there is no way to know which controller -* will become available first. -* -*****************************************************************************/ - -typedef struct { - DMA_Channel_t channel[DMA_NUM_CHANNELS]; - -} DMA_Controller_t; - -/**************************************************************************** -* -* The DMA_Global_t contains all of the global state information used by -* the DMA code. -* -* Callers which need to allocate a shared channel will be queued up -* on the freeChannelQ until a channel becomes available. -* -*****************************************************************************/ - -typedef struct { - struct semaphore lock; /* acquired when manipulating table entries */ - wait_queue_head_t freeChannelQ; - - DMA_Controller_t controller[DMA_NUM_CONTROLLERS]; - -} DMA_Global_t; - -/* ---- Variable Externs ------------------------------------------------- */ - -extern DMA_DeviceAttribute_t DMA_gDeviceAttribute[DMA_NUM_DEVICE_ENTRIES]; - -/* ---- Function Prototypes ---------------------------------------------- */ - -#if defined(__KERNEL__) - -/****************************************************************************/ -/** -* Initializes the DMA module. -* -* @return -* 0 - Success -* < 0 - Error -*/ -/****************************************************************************/ - -int dma_init(void); - -#if (DMA_DEBUG_TRACK_RESERVATION) -DMA_Handle_t dma_request_channel_dbg(DMA_Device_t dev, const char *fileName, - int lineNum); -#define dma_request_channel(dev) dma_request_channel_dbg(dev, __FILE__, __LINE__) -#else - -/****************************************************************************/ -/** -* Reserves a channel for use with @a dev. If the device is setup to use -* a shared channel, then this function will block until a free channel -* becomes available. -* -* @return -* >= 0 - A valid DMA Handle. -* -EBUSY - Device is currently being used. -* -ENODEV - Device handed in is invalid. -*/ -/****************************************************************************/ - -DMA_Handle_t dma_request_channel(DMA_Device_t dev /* Device to use with the allocated channel. */ - ); -#endif - -/****************************************************************************/ -/** -* Frees a previously allocated DMA Handle. -* -* @return -* 0 - DMA Handle was released successfully. -* -EINVAL - Invalid DMA handle -*/ -/****************************************************************************/ - -int dma_free_channel(DMA_Handle_t channel /* DMA handle. */ - ); - -/****************************************************************************/ -/** -* Determines if a given device has been configured as using a shared -* channel. -* -* @return boolean -* 0 Device uses a dedicated channel -* non-zero Device uses a shared channel -*/ -/****************************************************************************/ - -int dma_device_is_channel_shared(DMA_Device_t dev /* Device to check. */ - ); - -/****************************************************************************/ -/** -* Allocates memory to hold a descriptor ring. The descriptor ring then -* needs to be populated by making one or more calls to -* dna_add_descriptors. -* -* The returned descriptor ring will be automatically initialized. -* -* @return -* 0 Descriptor ring was allocated successfully -* -ENOMEM Unable to allocate memory for the desired number of descriptors. -*/ -/****************************************************************************/ - -int dma_alloc_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to populate */ - int numDescriptors /* Number of descriptors that need to be allocated. */ - ); - -/****************************************************************************/ -/** -* Releases the memory which was previously allocated for a descriptor ring. -*/ -/****************************************************************************/ - -void dma_free_descriptor_ring(DMA_DescriptorRing_t *ring /* Descriptor to release */ - ); - -/****************************************************************************/ -/** -* Initializes a descriptor ring, so that descriptors can be added to it. -* Once a descriptor ring has been allocated, it may be reinitialized for -* use with additional/different regions of memory. -* -* Note that if 7 descriptors are allocated, it's perfectly acceptable to -* initialize the ring with a smaller number of descriptors. The amount -* of memory allocated for the descriptor ring will not be reduced, and -* the descriptor ring may be reinitialized later -* -* @return -* 0 Descriptor ring was initialized successfully -* -ENOMEM The descriptor which was passed in has insufficient space -* to hold the desired number of descriptors. -*/ -/****************************************************************************/ - -int dma_init_descriptor_ring(DMA_DescriptorRing_t *ring, /* Descriptor ring to initialize */ - int numDescriptors /* Number of descriptors to initialize. */ - ); - -/****************************************************************************/ -/** -* Determines the number of descriptors which would be required for a -* transfer of the indicated memory region. -* -* This function also needs to know which DMA device this transfer will -* be destined for, so that the appropriate DMA configuration can be retrieved. -* DMA parameters such as transfer width, and whether this is a memory-to-memory -* or memory-to-peripheral, etc can all affect the actual number of descriptors -* required. -* -* @return -* > 0 Returns the number of descriptors required for the indicated transfer -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_calculate_descriptor_count(DMA_Device_t device, /* DMA Device that this will be associated with */ - dma_addr_t srcData, /* Place to get data to write to device */ - dma_addr_t dstData, /* Pointer to device data address */ - size_t numBytes /* Number of bytes to transfer to the device */ - ); - -/****************************************************************************/ -/** -* Adds a region of memory to the descriptor ring. Note that it may take -* multiple descriptors for each region of memory. It is the callers -* responsibility to allocate a sufficiently large descriptor ring. -* -* @return -* 0 Descriptors were added successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_add_descriptors(DMA_DescriptorRing_t *ring, /* Descriptor ring to add descriptors to */ - DMA_Device_t device, /* DMA Device that descriptors are for */ - dma_addr_t srcData, /* Place to get data (memory or device) */ - dma_addr_t dstData, /* Place to put data (memory or device) */ - size_t numBytes /* Number of bytes to transfer to the device */ - ); - -/****************************************************************************/ -/** -* Sets the descriptor ring associated with a device. -* -* Once set, the descriptor ring will be associated with the device, even -* across channel request/free calls. Passing in a NULL descriptor ring -* will release any descriptor ring currently associated with the device. -* -* Note: If you call dma_transfer, or one of the other dma_alloc_ functions -* the descriptor ring may be released and reallocated. -* -* Note: This function will release the descriptor memory for any current -* descriptor ring associated with this device. -*/ -/****************************************************************************/ - -int dma_set_device_descriptor_ring(DMA_Device_t device, /* Device to update the descriptor ring for. */ - DMA_DescriptorRing_t *ring /* Descriptor ring to add descriptors to */ - ); - -/****************************************************************************/ -/** -* Retrieves the descriptor ring associated with a device. -*/ -/****************************************************************************/ - -int dma_get_device_descriptor_ring(DMA_Device_t device, /* Device to retrieve the descriptor ring for. */ - DMA_DescriptorRing_t *ring /* Place to store retrieved ring */ - ); - -/****************************************************************************/ -/** -* Allocates buffers for the descriptors. This is normally done automatically -* but needs to be done explicitly when initiating a dma from interrupt -* context. -* -* @return -* 0 Descriptors were allocated successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_alloc_descriptors(DMA_Handle_t handle, /* DMA Handle */ - dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */ - dma_addr_t srcData, /* Place to get data to write to device */ - dma_addr_t dstData, /* Pointer to device data address */ - size_t numBytes /* Number of bytes to transfer to the device */ - ); - -/****************************************************************************/ -/** -* Allocates and sets up descriptors for a double buffered circular buffer. -* -* This is primarily intended to be used for things like the ingress samples -* from a microphone. -* -* @return -* > 0 Number of descriptors actually allocated. -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -* -ENOMEM Memory exhausted -*/ -/****************************************************************************/ - -int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */ - dma_addr_t srcData, /* Physical address of source data */ - dma_addr_t dstData1, /* Physical address of first destination buffer */ - dma_addr_t dstData2, /* Physical address of second destination buffer */ - size_t numBytes /* Number of bytes in each destination buffer */ - ); - -/****************************************************************************/ -/** -* Initiates a transfer when the descriptors have already been setup. -* -* This is a special case, and normally, the dma_transfer_xxx functions should -* be used. -* -* @return -* 0 Transfer was started successfully -* -ENODEV Invalid handle -*/ -/****************************************************************************/ - -int dma_start_transfer(DMA_Handle_t handle); - -/****************************************************************************/ -/** -* Stops a previously started DMA transfer. -* -* @return -* 0 Transfer was stopped successfully -* -ENODEV Invalid handle -*/ -/****************************************************************************/ - -int dma_stop_transfer(DMA_Handle_t handle); - -/****************************************************************************/ -/** -* Waits for a DMA to complete by polling. This function is only intended -* to be used for testing. Interrupts should be used for most DMA operations. -*/ -/****************************************************************************/ - -int dma_wait_transfer_done(DMA_Handle_t handle); - -/****************************************************************************/ -/** -* Initiates a DMA transfer -* -* @return -* 0 Transfer was started successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -*/ -/****************************************************************************/ - -int dma_transfer(DMA_Handle_t handle, /* DMA Handle */ - dmacHw_TRANSFER_TYPE_e transferType, /* Type of transfer being performed */ - dma_addr_t srcData, /* Place to get data to write to device */ - dma_addr_t dstData, /* Pointer to device data address */ - size_t numBytes /* Number of bytes to transfer to the device */ - ); - -/****************************************************************************/ -/** -* Initiates a transfer from memory to a device. -* -* @return -* 0 Transfer was started successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _DEV_TO_MEM and not _MEM_TO_DEV) -*/ -/****************************************************************************/ - -static inline int dma_transfer_to_device(DMA_Handle_t handle, /* DMA Handle */ - dma_addr_t srcData, /* Place to get data to write to device (physical address) */ - dma_addr_t dstData, /* Pointer to device data address (physical address) */ - size_t numBytes /* Number of bytes to transfer to the device */ - ) { - return dma_transfer(handle, - dmacHw_TRANSFER_TYPE_MEM_TO_PERIPHERAL, - srcData, dstData, numBytes); -} - -/****************************************************************************/ -/** -* Initiates a transfer from a device to memory. -* -* @return -* 0 Transfer was started successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device is _MEM_TO_DEV and not _DEV_TO_MEM) -*/ -/****************************************************************************/ - -static inline int dma_transfer_from_device(DMA_Handle_t handle, /* DMA Handle */ - dma_addr_t srcData, /* Pointer to the device data address (physical address) */ - dma_addr_t dstData, /* Place to store data retrieved from the device (physical address) */ - size_t numBytes /* Number of bytes to retrieve from the device */ - ) { - return dma_transfer(handle, - dmacHw_TRANSFER_TYPE_PERIPHERAL_TO_MEM, - srcData, dstData, numBytes); -} - -/****************************************************************************/ -/** -* Initiates a memory to memory transfer. -* -* @return -* 0 Transfer was started successfully -* -EINVAL Invalid device type for this kind of transfer -* (i.e. the device wasn't DMA_DEVICE_MEM_TO_MEM) -*/ -/****************************************************************************/ - -static inline int dma_transfer_mem_to_mem(DMA_Handle_t handle, /* DMA Handle */ - dma_addr_t srcData, /* Place to transfer data from (physical address) */ - dma_addr_t dstData, /* Place to transfer data to (physical address) */ - size_t numBytes /* Number of bytes to transfer */ - ) { - return dma_transfer(handle, - dmacHw_TRANSFER_TYPE_MEM_TO_MEM, - srcData, dstData, numBytes); -} - -/****************************************************************************/ -/** -* Set the callback function which will be called when a transfer completes. -* If a NULL callback function is set, then no callback will occur. -* -* @note @a devHandler will be called from IRQ context. -* -* @return -* 0 - Success -* -ENODEV - Device handed in is invalid. -*/ -/****************************************************************************/ - -int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for. */ - DMA_DeviceHandler_t devHandler, /* Function to call when the DMA completes */ - void *userData /* Pointer which will be passed to devHandler. */ - ); - -#endif - -#endif /* ASM_ARM_ARCH_BCMRING_DMA_H */ diff --git a/arch/arm/mach-bcmring/include/mach/entry-macro.S b/arch/arm/mach-bcmring/include/mach/entry-macro.S deleted file mode 100644 index 2f316f0e6e69950f15e4532f22f1a7814a2d5841..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/entry-macro.S +++ /dev/null @@ -1,76 +0,0 @@ -/***************************************************************************** -* Copyright 2006 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/* - * - * Low-level IRQ helper macros for BCMRing-based platforms - * - */ -#include -#include -#include - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \base, =(MM_IO_BASE_INTC0) - ldr \irqstat, [\base, #0] @ get status - ldr \irqnr, [\base, #0x10] @ mask with enable register - ands \irqstat, \irqstat, \irqnr - mov \irqnr, #IRQ_INTC0_START - cmp \irqstat, #0 - bne 1001f - - ldr \base, =(MM_IO_BASE_INTC1) - ldr \irqstat, [\base, #0] @ get status - ldr \irqnr, [\base, #0x10] @ mask with enable register - ands \irqstat, \irqstat, \irqnr - mov \irqnr, #IRQ_INTC1_START - cmp \irqstat, #0 - bne 1001f - - ldr \base, =(MM_IO_BASE_SINTC) - ldr \irqstat, [\base, #0] @ get status - ldr \irqnr, [\base, #0x10] @ mask with enable register - ands \irqstat, \irqstat, \irqnr - mov \irqnr, #0xffffffff @ code meaning no interrupt bits set - cmp \irqstat, #0 - beq 1002f - - mov \irqnr, #IRQ_SINTC_START @ something is set, so fixup return value - -1001: - movs \tmp, \irqstat, lsl #16 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #16 - - movs \tmp, \irqstat, lsl #8 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #8 - - movs \tmp, \irqstat, lsl #4 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #4 - - movs \tmp, \irqstat, lsl #2 - movne \irqstat, \tmp - addeq \irqnr, \irqnr, #2 - - movs \tmp, \irqstat, lsl #1 - addeq \irqnr, \irqnr, #1 - orrs \base, \base, #1 - -1002: @ irqnr will be set to 0xffffffff if no irq bits are set - .endm - - .macro get_irqnr_preamble, base, tmp - .endm diff --git a/arch/arm/mach-bcmring/include/mach/hardware.h b/arch/arm/mach-bcmring/include/mach/hardware.h deleted file mode 100644 index 6ae20a649a97ba9b55dd32a423312feae57e5f7b..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/hardware.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * - * This file contains the hardware definitions of the BCMRing. - * - * Copyright (C) 1999 ARM Limited. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARCH_HARDWARE_H -#define __ASM_ARCH_HARDWARE_H - -#include -#include -#include - -/* Hardware addresses of major areas. - * *_START is the physical address - * *_SIZE is the size of the region - * *_BASE is the virtual address - */ -#define RAM_START PHYS_OFFSET - -#define RAM_SIZE (CFG_GLOBAL_RAM_SIZE-CFG_GLOBAL_RAM_SIZE_RESERVED) -#define RAM_BASE PAGE_OFFSET - -/* Macros to make managing spinlocks a bit more controlled in terms of naming. */ -/* See reg_gpio.h, reg_irq.h, arch.c, gpio.c for example usage. */ -#if defined(__KERNEL__) -#define HW_DECLARE_SPINLOCK(name) DEFINE_SPINLOCK(bcmring_##name##_reg_lock); -#define HW_EXTERN_SPINLOCK(name) extern spinlock_t bcmring_##name##_reg_lock; -#define HW_IRQ_SAVE(name, val) spin_lock_irqsave(&bcmring_##name##_reg_lock, (val)) -#define HW_IRQ_RESTORE(name, val) spin_unlock_irqrestore(&bcmring_##name##_reg_lock, (val)) -#else -#define HW_DECLARE_SPINLOCK(name) -#define HW_EXTERN_SPINLOCK(name) -#define HW_IRQ_SAVE(name, val) {(void)(name); (void)(val); } -#define HW_IRQ_RESTORE(name, val) {(void)(name); (void)(val); } -#endif - -#ifndef HW_IO_PHYS_TO_VIRT -#define HW_IO_PHYS_TO_VIRT MM_IO_PHYS_TO_VIRT -#endif -#define HW_IO_VIRT_TO_PHYS MM_IO_VIRT_TO_PHYS - -#endif diff --git a/arch/arm/mach-bcmring/include/mach/irqs.h b/arch/arm/mach-bcmring/include/mach/irqs.h deleted file mode 100644 index b279b825d4a7ad0e6d1ac57cc0e096d050b64394..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/irqs.h +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Copyright (C) 2007 Broadcom - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#if !defined(ARCH_BCMRING_IRQS_H) -#define ARCH_BCMRING_IRQS_H - -/* INTC0 - interrupt controller 0 */ -#define IRQ_INTC0_START 0 -#define IRQ_DMA0C0 0 /* DMA0 channel 0 interrupt */ -#define IRQ_DMA0C1 1 /* DMA0 channel 1 interrupt */ -#define IRQ_DMA0C2 2 /* DMA0 channel 2 interrupt */ -#define IRQ_DMA0C3 3 /* DMA0 channel 3 interrupt */ -#define IRQ_DMA0C4 4 /* DMA0 channel 4 interrupt */ -#define IRQ_DMA0C5 5 /* DMA0 channel 5 interrupt */ -#define IRQ_DMA0C6 6 /* DMA0 channel 6 interrupt */ -#define IRQ_DMA0C7 7 /* DMA0 channel 7 interrupt */ -#define IRQ_DMA1C0 8 /* DMA1 channel 0 interrupt */ -#define IRQ_DMA1C1 9 /* DMA1 channel 1 interrupt */ -#define IRQ_DMA1C2 10 /* DMA1 channel 2 interrupt */ -#define IRQ_DMA1C3 11 /* DMA1 channel 3 interrupt */ -#define IRQ_DMA1C4 12 /* DMA1 channel 4 interrupt */ -#define IRQ_DMA1C5 13 /* DMA1 channel 5 interrupt */ -#define IRQ_DMA1C6 14 /* DMA1 channel 6 interrupt */ -#define IRQ_DMA1C7 15 /* DMA1 channel 7 interrupt */ -#define IRQ_VPM 16 /* Voice process module interrupt */ -#define IRQ_USBHD2 17 /* USB host2/device2 interrupt */ -#define IRQ_USBH1 18 /* USB1 host interrupt */ -#define IRQ_USBD 19 /* USB device interrupt */ -#define IRQ_SDIOH0 20 /* SDIO0 host interrupt */ -#define IRQ_SDIOH1 21 /* SDIO1 host interrupt */ -#define IRQ_TIMER0 22 /* Timer0 interrupt */ -#define IRQ_TIMER1 23 /* Timer1 interrupt */ -#define IRQ_TIMER2 24 /* Timer2 interrupt */ -#define IRQ_TIMER3 25 /* Timer3 interrupt */ -#define IRQ_SPIH 26 /* SPI host interrupt */ -#define IRQ_ESW 27 /* Ethernet switch interrupt */ -#define IRQ_APM 28 /* Audio process module interrupt */ -#define IRQ_GE 29 /* Graphic engine interrupt */ -#define IRQ_CLCD 30 /* LCD Controller interrupt */ -#define IRQ_PIF 31 /* Peripheral interface interrupt */ -#define IRQ_INTC0_END 31 - -/* INTC1 - interrupt controller 1 */ -#define IRQ_INTC1_START 32 -#define IRQ_GPIO0 32 /* 0 GPIO bit 31//0 combined interrupt */ -#define IRQ_GPIO1 33 /* 1 GPIO bit 64//32 combined interrupt */ -#define IRQ_I2S0 34 /* 2 I2S0 interrupt */ -#define IRQ_I2S1 35 /* 3 I2S1 interrupt */ -#define IRQ_I2CH 36 /* 4 I2C host interrupt */ -#define IRQ_I2CS 37 /* 5 I2C slave interrupt */ -#define IRQ_SPIS 38 /* 6 SPI slave interrupt */ -#define IRQ_GPHY 39 /* 7 Gigabit Phy interrupt */ -#define IRQ_FLASHC 40 /* 8 Flash controller interrupt */ -#define IRQ_COMMTX 41 /* 9 ARM DDC transmit interrupt */ -#define IRQ_COMMRX 42 /* 10 ARM DDC receive interrupt */ -#define IRQ_PMUIRQ 43 /* 11 ARM performance monitor interrupt */ -#define IRQ_UARTB 44 /* 12 UARTB */ -#define IRQ_WATCHDOG 45 /* 13 Watchdog timer interrupt */ -#define IRQ_UARTA 46 /* 14 UARTA */ -#define IRQ_TSC 47 /* 15 Touch screen controller interrupt */ -#define IRQ_KEYC 48 /* 16 Key pad controller interrupt */ -#define IRQ_DMPU 49 /* 17 DDR2 memory partition interrupt */ -#define IRQ_VMPU 50 /* 18 VRAM memory partition interrupt */ -#define IRQ_FMPU 51 /* 19 Flash memory parition unit interrupt */ -#define IRQ_RNG 52 /* 20 Random number generator interrupt */ -#define IRQ_RTC0 53 /* 21 Real time clock periodic interrupt */ -#define IRQ_RTC1 54 /* 22 Real time clock one-shot interrupt */ -#define IRQ_SPUM 55 /* 23 Secure process module interrupt */ -#define IRQ_VDEC 56 /* 24 Hantro video decoder interrupt */ -#define IRQ_RTC2 57 /* 25 Real time clock tamper interrupt */ -#define IRQ_DDRP 58 /* 26 DDR Panic interrupt */ -#define IRQ_INTC1_END 58 - -/* SINTC secure int controller */ -#define IRQ_SINTC_START 59 -#define IRQ_SEC_WATCHDOG 59 /* 0 Watchdog timer interrupt */ -#define IRQ_SEC_UARTA 60 /* 1 UARTA interrupt */ -#define IRQ_SEC_TSC 61 /* 2 Touch screen controller interrupt */ -#define IRQ_SEC_KEYC 62 /* 3 Key pad controller interrupt */ -#define IRQ_SEC_DMPU 63 /* 4 DDR2 memory partition interrupt */ -#define IRQ_SEC_VMPU 64 /* 5 VRAM memory partition interrupt */ -#define IRQ_SEC_FMPU 65 /* 6 Flash memory parition unit interrupt */ -#define IRQ_SEC_RNG 66 /* 7 Random number generator interrupt */ -#define IRQ_SEC_RTC0 67 /* 8 Real time clock periodic interrupt */ -#define IRQ_SEC_RTC1 68 /* 9 Real time clock one-shot interrupt */ -#define IRQ_SEC_SPUM 69 /* 10 Secure process module interrupt */ -#define IRQ_SEC_TIMER0 70 /* 11 Secure timer0 interrupt */ -#define IRQ_SEC_TIMER1 71 /* 12 Secure timer1 interrupt */ -#define IRQ_SEC_TIMER2 72 /* 13 Secure timer2 interrupt */ -#define IRQ_SEC_TIMER3 73 /* 14 Secure timer3 interrupt */ -#define IRQ_SEC_RTC2 74 /* 15 Real time clock tamper interrupt */ - -#define IRQ_SINTC_END 74 - -/* Note: there are 3 INTC registers of 32 bits each. So internal IRQs could go from 0-95 */ -/* Since IRQs are typically viewed in decimal, we start the gpio based IRQs off at 100 */ -/* to make the mapping easy for humans to decipher. */ - -#define IRQ_GPIO_0 100 - -#define NUM_INTERNAL_IRQS (IRQ_SINTC_END+1) - -/* I couldn't get the gpioHw_reg.h file to be included cleanly, so I hardcoded it */ -/* define NUM_GPIO_IRQS GPIOHW_TOTAL_NUM_PINS */ -#define NUM_GPIO_IRQS 62 - -#define NR_IRQS (IRQ_GPIO_0 + NUM_GPIO_IRQS) - -#define IRQ_UNKNOWN -1 - -/* Tune these bits to preclude noisy or unsupported interrupt sources as required. */ -#define IRQ_INTC0_VALID_MASK 0xffffffff -#define IRQ_INTC1_VALID_MASK 0x07ffffff -#define IRQ_SINTC_VALID_MASK 0x0000ffff - -#endif /* ARCH_BCMRING_IRQS_H */ diff --git a/arch/arm/mach-bcmring/include/mach/memory_settings.h b/arch/arm/mach-bcmring/include/mach/memory_settings.h deleted file mode 100644 index ce5cd16f2ac4a80ef53dd00f6f21d6337a31348d..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/memory_settings.h +++ /dev/null @@ -1,67 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#ifndef MEMORY_SETTINGS_H -#define MEMORY_SETTINGS_H - -/* ---- Include Files ---------------------------------------- */ -/* ---- Constants and Types ---------------------------------- */ - -/* Memory devices */ -/* NAND Flash timing for 166 MHz setting */ -#define HW_CFG_NAND_tBTA (5 << 16) /* Bus turnaround cycle (n) 0-7 (30 ns) */ -#define HW_CFG_NAND_tWP (4 << 11) /* Write pulse width cycle (n+1) 0-31 (25 ns) */ -#define HW_CFG_NAND_tWR (1 << 9) /* Write recovery cycle (n+1) 0-3 (10 ns) */ -#define HW_CFG_NAND_tAS (0 << 7) /* Write address setup cycle (n+1) 0-3 ( 0 ns) */ -#define HW_CFG_NAND_tOE (3 << 5) /* Output enable delay cycle (n) 0-3 (15 ns) */ -#define HW_CFG_NAND_tRC (7 << 0) /* Read access cycle (n+2) 0-31 (50 ns) */ - -#define HW_CFG_NAND_TCR (HW_CFG_NAND_tBTA \ - | HW_CFG_NAND_tWP \ - | HW_CFG_NAND_tWR \ - | HW_CFG_NAND_tAS \ - | HW_CFG_NAND_tOE \ - | HW_CFG_NAND_tRC) - -/* NOR Flash timing for 166 MHz setting */ -#define HW_CFG_NOR_TPRC_TWLC (0 << 19) /* Page read access cycle / Burst write latency (n+2 / n+1) (max 25ns) */ -#define HW_CFG_NOR_TBTA (0 << 16) /* Bus turnaround cycle (n) (DNA) */ -#define HW_CFG_NOR_TWP (6 << 11) /* Write pulse width cycle (n+1) (35ns) */ -#define HW_CFG_NOR_TWR (0 << 9) /* Write recovery cycle (n+1) (0ns) */ -#define HW_CFG_NOR_TAS (0 << 7) /* Write address setup cycle (n+1) (0ns) */ -#define HW_CFG_NOR_TOE (0 << 5) /* Output enable delay cycle (n) (max 25ns) */ -#define HW_CFG_NOR_TRC_TLC (0x10 << 0) /* Read access cycle / Burst read latency (n+2 / n+1) (100ns) */ - -#define HW_CFG_FLASH0_TCR (HW_CFG_NOR_TPRC_TWLC \ - | HW_CFG_NOR_TBTA \ - | HW_CFG_NOR_TWP \ - | HW_CFG_NOR_TWR \ - | HW_CFG_NOR_TAS \ - | HW_CFG_NOR_TOE \ - | HW_CFG_NOR_TRC_TLC) - -#define HW_CFG_FLASH1_TCR HW_CFG_FLASH0_TCR -#define HW_CFG_FLASH2_TCR HW_CFG_FLASH0_TCR - -/* SDRAM Settings */ -/* #define HW_CFG_SDRAM_CAS_LATENCY 5 Default 5, Values [3..6] */ -/* #define HW_CFG_SDRAM_CHIP_SELECT_CNT 1 Default 1, Vaules [1..2] */ -/* #define HW_CFG_SDRAM_SPEED_GRADE 667 Default 667, Values [400,533,667,800] */ -/* #define HW_CFG_SDRAM_WIDTH_BITS 16 Default 16, Vaules [8,16] */ -#define HW_CFG_SDRAM_SIZE_BYTES 0x10000000 /* Total memory, not per device size */ - -/* ---- Variable Externs ------------------------------------- */ -/* ---- Function Prototypes ---------------------------------- */ - -#endif /* MEMORY_SETTINGS_H */ diff --git a/arch/arm/mach-bcmring/include/mach/reg_nand.h b/arch/arm/mach-bcmring/include/mach/reg_nand.h deleted file mode 100644 index 387376ffb56bee3503c32fc89d1154b6292c6912..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/reg_nand.h +++ /dev/null @@ -1,66 +0,0 @@ -/***************************************************************************** -* Copyright 2001 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/* -* -***************************************************************************** -* -* REG_NAND.h -* -* PURPOSE: -* -* This file contains definitions for the nand registers: -* -* NOTES: -* -*****************************************************************************/ - -#if !defined(__ASM_ARCH_REG_NAND_H) -#define __ASM_ARCH_REG_NAND_H - -/* ---- Include Files ---------------------------------------------------- */ -#include -#include - -/* ---- Constants and Types ---------------------------------------------- */ - -#define HW_NAND_BASE MM_IO_BASE_NAND /* NAND Flash */ - -/* DMA accesses by the bootstrap need hard nonvirtual addresses */ -#define REG_NAND_CMD __REG16(HW_NAND_BASE + 0) -#define REG_NAND_ADDR __REG16(HW_NAND_BASE + 4) - -#define REG_NAND_PHYS_DATA16 (HW_NAND_BASE + 8) -#define REG_NAND_PHYS_DATA8 (HW_NAND_BASE + 8) -#define REG_NAND_DATA16 __REG16(REG_NAND_PHYS_DATA16) -#define REG_NAND_DATA8 __REG8(REG_NAND_PHYS_DATA8) - -/* use appropriate offset to make sure it start at the 1K boundary */ -#define REG_NAND_PHYS_DATA_DMA (HW_NAND_BASE + 0x400) -#define REG_NAND_DATA_DMA __REG32(REG_NAND_PHYS_DATA_DMA) - -/* Linux DMA requires physical address of the data register */ -#define REG_NAND_DATA16_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA16) -#define REG_NAND_DATA8_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA8) -#define REG_NAND_DATA_PADDR HW_IO_VIRT_TO_PHYS(REG_NAND_PHYS_DATA_DMA) - -#define NAND_BUS_16BIT() (0) -#define NAND_BUS_8BIT() (!NAND_BUS_16BIT()) - -/* Register offsets */ -#define REG_NAND_CMD_OFFSET (0) -#define REG_NAND_ADDR_OFFSET (4) -#define REG_NAND_DATA8_OFFSET (8) - -#endif diff --git a/arch/arm/mach-bcmring/include/mach/reg_umi.h b/arch/arm/mach-bcmring/include/mach/reg_umi.h deleted file mode 100644 index 0992842caa77fc919e81f21dfbc66a68a2b9c2b4..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/reg_umi.h +++ /dev/null @@ -1,237 +0,0 @@ -/***************************************************************************** -* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/* -* -***************************************************************************** -* -* REG_UMI.h -* -* PURPOSE: -* -* This file contains definitions for the nand registers: -* -* NOTES: -* -*****************************************************************************/ - -#if !defined(__ASM_ARCH_REG_UMI_H) -#define __ASM_ARCH_REG_UMI_H - -/* ---- Include Files ---------------------------------------------------- */ -#include -#include - -/* ---- Constants and Types ---------------------------------------------- */ - -/* Unified Memory Interface Ctrl Register */ -#define HW_UMI_BASE MM_IO_BASE_UMI - -/* Flash bank 0 timing and control register */ -#define REG_UMI_FLASH0_TCR __REG32(HW_UMI_BASE + 0x00) -/* Flash bank 1 timing and control register */ -#define REG_UMI_FLASH1_TCR __REG32(HW_UMI_BASE + 0x04) -/* Flash bank 2 timing and control register */ -#define REG_UMI_FLASH2_TCR __REG32(HW_UMI_BASE + 0x08) -/* MMD interface and control register */ -#define REG_UMI_MMD_ICR __REG32(HW_UMI_BASE + 0x0c) -/* NAND timing and control register */ -#define REG_UMI_NAND_TCR __REG32(HW_UMI_BASE + 0x18) -/* NAND ready/chip select register */ -#define REG_UMI_NAND_RCSR __REG32(HW_UMI_BASE + 0x1c) -/* NAND ECC control & status register */ -#define REG_UMI_NAND_ECC_CSR __REG32(HW_UMI_BASE + 0x20) -/* NAND ECC data register XXB2B1B0 */ -#define REG_UMI_NAND_ECC_DATA __REG32(HW_UMI_BASE + 0x24) -/* BCH ECC Parameter N */ -#define REG_UMI_BCH_N __REG32(HW_UMI_BASE + 0x40) -/* BCH ECC Parameter T */ -#define REG_UMI_BCH_K __REG32(HW_UMI_BASE + 0x44) -/* BCH ECC Parameter K */ -#define REG_UMI_BCH_T __REG32(HW_UMI_BASE + 0x48) -/* BCH ECC Contro Status */ -#define REG_UMI_BCH_CTRL_STATUS __REG32(HW_UMI_BASE + 0x4C) -/* BCH WR ECC 31:0 */ -#define REG_UMI_BCH_WR_ECC_0 __REG32(HW_UMI_BASE + 0x50) -/* BCH WR ECC 63:32 */ -#define REG_UMI_BCH_WR_ECC_1 __REG32(HW_UMI_BASE + 0x54) -/* BCH WR ECC 95:64 */ -#define REG_UMI_BCH_WR_ECC_2 __REG32(HW_UMI_BASE + 0x58) -/* BCH WR ECC 127:96 */ -#define REG_UMI_BCH_WR_ECC_3 __REG32(HW_UMI_BASE + 0x5c) -/* BCH WR ECC 155:128 */ -#define REG_UMI_BCH_WR_ECC_4 __REG32(HW_UMI_BASE + 0x60) -/* BCH Read Error Location 1,0 */ -#define REG_UMI_BCH_RD_ERR_LOC_1_0 __REG32(HW_UMI_BASE + 0x64) -/* BCH Read Error Location 3,2 */ -#define REG_UMI_BCH_RD_ERR_LOC_3_2 __REG32(HW_UMI_BASE + 0x68) -/* BCH Read Error Location 5,4 */ -#define REG_UMI_BCH_RD_ERR_LOC_5_4 __REG32(HW_UMI_BASE + 0x6c) -/* BCH Read Error Location 7,6 */ -#define REG_UMI_BCH_RD_ERR_LOC_7_6 __REG32(HW_UMI_BASE + 0x70) -/* BCH Read Error Location 9,8 */ -#define REG_UMI_BCH_RD_ERR_LOC_9_8 __REG32(HW_UMI_BASE + 0x74) -/* BCH Read Error Location 11,10 */ -#define REG_UMI_BCH_RD_ERR_LOC_B_A __REG32(HW_UMI_BASE + 0x78) - -/* REG_UMI_FLASH0/1/2_TCR, REG_UMI_SRAM0/1_TCR bits */ -/* Enable wait pin during burst write or read */ -#define REG_UMI_TCR_WAITEN 0x80000000 -/* Enable mem ctrlr to work with ext mem of lower freq than AHB clk */ -#define REG_UMI_TCR_LOWFREQ 0x40000000 -/* 1=synch write, 0=async write */ -#define REG_UMI_TCR_MEMTYPE_SYNCWRITE 0x20000000 -/* 1=synch read, 0=async read */ -#define REG_UMI_TCR_MEMTYPE_SYNCREAD 0x10000000 -/* 1=page mode read, 0=normal mode read */ -#define REG_UMI_TCR_MEMTYPE_PAGEREAD 0x08000000 -/* page size/burst size (wrap only) */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_MASK 0x07000000 -/* 4 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_4 0x00000000 -/* 8 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_8 0x01000000 -/* 16 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_16 0x02000000 -/* 32 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_32 0x03000000 -/* 64 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_64 0x04000000 -/* 128 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_128 0x05000000 -/* 256 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_256 0x06000000 -/* 512 word */ -#define REG_UMI_TCR_MEMTYPE_PGSZ_512 0x07000000 -/* Page read access cycle / Burst write latency (n+2 / n+1) */ -#define REG_UMI_TCR_TPRC_TWLC_MASK 0x00f80000 -/* Bus turnaround cycle (n) */ -#define REG_UMI_TCR_TBTA_MASK 0x00070000 -/* Write pulse width cycle (n+1) */ -#define REG_UMI_TCR_TWP_MASK 0x0000f800 -/* Write recovery cycle (n+1) */ -#define REG_UMI_TCR_TWR_MASK 0x00000600 -/* Write address setup cycle (n+1) */ -#define REG_UMI_TCR_TAS_MASK 0x00000180 -/* Output enable delay cycle (n) */ -#define REG_UMI_TCR_TOE_MASK 0x00000060 -/* Read access cycle / Burst read latency (n+2 / n+1) */ -#define REG_UMI_TCR_TRC_TLC_MASK 0x0000001f - -/* REG_UMI_MMD_ICR bits */ -/* Flash write protection pin control */ -#define REG_UMI_MMD_ICR_FLASH_WP 0x8000 -/* Extend hold time for sram0, sram1 csn (39 MHz operation) */ -#define REG_UMI_MMD_ICR_XHCS 0x4000 -/* Enable SDRAM 2 interface control */ -#define REG_UMI_MMD_ICR_SDRAM2EN 0x2000 -/* Enable merge of flash banks 0/1 to 512 MBit bank */ -#define REG_UMI_MMD_ICR_INST512 0x1000 -/* Enable merge of flash banks 1/2 to 512 MBit bank */ -#define REG_UMI_MMD_ICR_DATA512 0x0800 -/* Enable SDRAM interface control */ -#define REG_UMI_MMD_ICR_SDRAMEN 0x0400 -/* Polarity of busy state of Burst Wait Signal */ -#define REG_UMI_MMD_ICR_WAITPOL 0x0200 -/* Enable burst clock stopped when not accessing external burst flash/sram */ -#define REG_UMI_MMD_ICR_BCLKSTOP 0x0100 -/* Enable the peri1_csn to replace flash1_csn in 512 Mb flash mode */ -#define REG_UMI_MMD_ICR_PERI1EN 0x0080 -/* Enable the peri2_csn to replace sdram_csn */ -#define REG_UMI_MMD_ICR_PERI2EN 0x0040 -/* Enable the peri3_csn to replace sdram2_csn */ -#define REG_UMI_MMD_ICR_PERI3EN 0x0020 -/* Enable sram bank1 for H/W controlled MRS */ -#define REG_UMI_MMD_ICR_MRSB1 0x0010 -/* Enable sram bank0 for H/W controlled MRS */ -#define REG_UMI_MMD_ICR_MRSB0 0x0008 -/* Polarity for assert3ed state of H/W controlled MRS */ -#define REG_UMI_MMD_ICR_MRSPOL 0x0004 -/* 0: S/W controllable ZZ/MRS/CRE/P-Mode pin */ -/* 1: H/W controlled ZZ/MRS/CRE/P-Mode, same timing as CS */ -#define REG_UMI_MMD_ICR_MRSMODE 0x0002 -/* MRS state for S/W controlled mode */ -#define REG_UMI_MMD_ICR_MRSSTATE 0x0001 - -/* REG_UMI_NAND_TCR bits */ -/* Enable software to control CS */ -#define REG_UMI_NAND_TCR_CS_SWCTRL 0x80000000 -/* 16-bit nand wordsize if set */ -#define REG_UMI_NAND_TCR_WORD16 0x40000000 -/* Bus turnaround cycle (n) */ -#define REG_UMI_NAND_TCR_TBTA_MASK 0x00070000 -/* Write pulse width cycle (n+1) */ -#define REG_UMI_NAND_TCR_TWP_MASK 0x0000f800 -/* Write recovery cycle (n+1) */ -#define REG_UMI_NAND_TCR_TWR_MASK 0x00000600 -/* Write address setup cycle (n+1) */ -#define REG_UMI_NAND_TCR_TAS_MASK 0x00000180 -/* Output enable delay cycle (n) */ -#define REG_UMI_NAND_TCR_TOE_MASK 0x00000060 -/* Read access cycle (n+2) */ -#define REG_UMI_NAND_TCR_TRC_TLC_MASK 0x0000001f - -/* REG_UMI_NAND_RCSR bits */ -/* Status: Ready=1, Busy=0 */ -#define REG_UMI_NAND_RCSR_RDY 0x02 -/* Keep CS asserted during operation */ -#define REG_UMI_NAND_RCSR_CS_ASSERTED 0x01 - -/* REG_UMI_NAND_ECC_CSR bits */ -/* Interrupt status - read-only */ -#define REG_UMI_NAND_ECC_CSR_NANDINT 0x80000000 -/* Read: Status of ECC done, Write: clear ECC interrupt */ -#define REG_UMI_NAND_ECC_CSR_ECCINT_RAW 0x00800000 -/* Read: Status of R/B, Write: clear R/B interrupt */ -#define REG_UMI_NAND_ECC_CSR_RBINT_RAW 0x00400000 -/* 1 = Enable ECC Interrupt */ -#define REG_UMI_NAND_ECC_CSR_ECCINT_ENABLE 0x00008000 -/* 1 = Assert interrupt at rising edge of R/B_ */ -#define REG_UMI_NAND_ECC_CSR_RBINT_ENABLE 0x00004000 -/* Calculate ECC by 0=512 bytes, 1=256 bytes */ -#define REG_UMI_NAND_ECC_CSR_256BYTE 0x00000080 -/* Enable ECC in hardware */ -#define REG_UMI_NAND_ECC_CSR_ECC_ENABLE 0x00000001 - -/* REG_UMI_BCH_CTRL_STATUS bits */ -/* Shift to Indicate Number of correctable errors detected */ -#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR_SHIFT 20 -/* Indicate Number of correctable errors detected */ -#define REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR 0x00F00000 -/* Indicate Errors detected during read but uncorrectable */ -#define REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR 0x00080000 -/* Indicate Errors detected during read and are correctable */ -#define REG_UMI_BCH_CTRL_STATUS_CORR_ERR 0x00040000 -/* Flag indicates BCH's ECC status of read process are valid */ -#define REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID 0x00020000 -/* Flag indicates BCH's ECC status of write process are valid */ -#define REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID 0x00010000 -/* Pause ECC calculation */ -#define REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC 0x00000010 -/* Enable Interrupt */ -#define REG_UMI_BCH_CTRL_STATUS_INT_EN 0x00000004 -/* Enable ECC during read */ -#define REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN 0x00000002 -/* Enable ECC during write */ -#define REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN 0x00000001 -/* Mask for location */ -#define REG_UMI_BCH_ERR_LOC_MASK 0x00001FFF -/* location within a byte */ -#define REG_UMI_BCH_ERR_LOC_BYTE 0x00000007 -/* location within a word */ -#define REG_UMI_BCH_ERR_LOC_WORD 0x00000018 -/* location within a page (512 byte) */ -#define REG_UMI_BCH_ERR_LOC_PAGE 0x00001FE0 -#define REG_UMI_BCH_ERR_LOC_ADDR(index) (__REG32(HW_UMI_BASE + 0x64 + (index / 2)*4) >> ((index % 2) * 16)) -#endif diff --git a/arch/arm/mach-bcmring/include/mach/timer.h b/arch/arm/mach-bcmring/include/mach/timer.h deleted file mode 100644 index 5a94bbb032b69551c566c76c70c6e9fc1302fd82..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/timer.h +++ /dev/null @@ -1,77 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/* -* -***************************************************************************** -* -* timer.h -* -* PURPOSE: -* -* -* -* NOTES: -* -*****************************************************************************/ - -#if !defined(BCM_LINUX_TIMER_H) -#define BCM_LINUX_TIMER_H - -#if defined(__KERNEL__) - -/* ---- Include Files ---------------------------------------------------- */ -/* ---- Constants and Types ---------------------------------------------- */ - -typedef unsigned int timer_tick_count_t; -typedef unsigned int timer_tick_rate_t; -typedef unsigned int timer_msec_t; - -/* ---- Variable Externs ------------------------------------------------- */ -/* ---- Function Prototypes ---------------------------------------------- */ - -/**************************************************************************** -* -* timer_get_tick_count -* -* -***************************************************************************/ -timer_tick_count_t timer_get_tick_count(void); - -/**************************************************************************** -* -* timer_get_tick_rate -* -* -***************************************************************************/ -timer_tick_rate_t timer_get_tick_rate(void); - -/**************************************************************************** -* -* timer_get_msec -* -* -***************************************************************************/ -timer_msec_t timer_get_msec(void); - -/**************************************************************************** -* -* timer_ticks_to_msec -* -* -***************************************************************************/ -timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks); - -#endif /* __KERNEL__ */ -#endif /* BCM_LINUX_TIMER_H */ diff --git a/arch/arm/mach-bcmring/include/mach/timex.h b/arch/arm/mach-bcmring/include/mach/timex.h deleted file mode 100644 index 40d033ec5892316b886150bc21e6eab9bd51587e..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/timex.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * - * Integrator architecture timex specifications - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -/* - * Specifies the number of ticks per second - */ -#define CLOCK_TICK_RATE 100000 /* REG_SMT_TICKS_PER_SEC */ diff --git a/arch/arm/mach-bcmring/include/mach/uncompress.h b/arch/arm/mach-bcmring/include/mach/uncompress.h deleted file mode 100644 index 9c9821b779774efaffcb6718921adc9aae85687c..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/include/mach/uncompress.h +++ /dev/null @@ -1,43 +0,0 @@ -/***************************************************************************** -* Copyright 2005 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ -#include - -#define BCMRING_UART_0_DR (*(volatile unsigned int *)MM_ADDR_IO_UARTA) -#define BCMRING_UART_0_FR (*(volatile unsigned int *)(MM_ADDR_IO_UARTA + 0x18)) -/* - * This does not append a newline - */ -static inline void putc(int c) -{ - /* Send out UARTA */ - while (BCMRING_UART_0_FR & (1 << 5)) - ; - - BCMRING_UART_0_DR = c; -} - - -static inline void flush(void) -{ - /* Wait for the tx fifo to be empty */ - while ((BCMRING_UART_0_FR & (1 << 7)) == 0) - ; - - /* Wait for the final character to be sent on the txd line */ - while (BCMRING_UART_0_FR & (1 << 3)) - ; -} - -#define arch_decomp_setup() -#define arch_decomp_wdog() diff --git a/arch/arm/mach-bcmring/irq.c b/arch/arm/mach-bcmring/irq.c deleted file mode 100644 index 437fa683bcb23bed8470bc9d6fa8f6fcc9faa52c..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/irq.c +++ /dev/null @@ -1,126 +0,0 @@ -/* - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include -#include -#include - -#include -#include - -#include -#include -#include - -static void bcmring_mask_irq0(struct irq_data *d) -{ - writel(1 << (d->irq - IRQ_INTC0_START), - MM_IO_BASE_INTC0 + INTCHW_INTENCLEAR); -} - -static void bcmring_unmask_irq0(struct irq_data *d) -{ - writel(1 << (d->irq - IRQ_INTC0_START), - MM_IO_BASE_INTC0 + INTCHW_INTENABLE); -} - -static void bcmring_mask_irq1(struct irq_data *d) -{ - writel(1 << (d->irq - IRQ_INTC1_START), - MM_IO_BASE_INTC1 + INTCHW_INTENCLEAR); -} - -static void bcmring_unmask_irq1(struct irq_data *d) -{ - writel(1 << (d->irq - IRQ_INTC1_START), - MM_IO_BASE_INTC1 + INTCHW_INTENABLE); -} - -static void bcmring_mask_irq2(struct irq_data *d) -{ - writel(1 << (d->irq - IRQ_SINTC_START), - MM_IO_BASE_SINTC + INTCHW_INTENCLEAR); -} - -static void bcmring_unmask_irq2(struct irq_data *d) -{ - writel(1 << (d->irq - IRQ_SINTC_START), - MM_IO_BASE_SINTC + INTCHW_INTENABLE); -} - -static struct irq_chip bcmring_irq0_chip = { - .name = "ARM-INTC0", - .irq_ack = bcmring_mask_irq0, - .irq_mask = bcmring_mask_irq0, /* mask a specific interrupt, blocking its delivery. */ - .irq_unmask = bcmring_unmask_irq0, /* unmaks an interrupt */ -}; - -static struct irq_chip bcmring_irq1_chip = { - .name = "ARM-INTC1", - .irq_ack = bcmring_mask_irq1, - .irq_mask = bcmring_mask_irq1, - .irq_unmask = bcmring_unmask_irq1, -}; - -static struct irq_chip bcmring_irq2_chip = { - .name = "ARM-SINTC", - .irq_ack = bcmring_mask_irq2, - .irq_mask = bcmring_mask_irq2, - .irq_unmask = bcmring_unmask_irq2, -}; - -static void vic_init(void __iomem *base, struct irq_chip *chip, - unsigned int irq_start, unsigned int vic_sources) -{ - unsigned int i; - for (i = 0; i < 32; i++) { - unsigned int irq = irq_start + i; - irq_set_chip(irq, chip); - irq_set_chip_data(irq, base); - - if (vic_sources & (1 << i)) { - irq_set_handler(irq, handle_level_irq); - set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); - } - } - writel(0, base + INTCHW_INTSELECT); - writel(0, base + INTCHW_INTENABLE); - writel(~0, base + INTCHW_INTENCLEAR); - writel(0, base + INTCHW_IRQSTATUS); - writel(~0, base + INTCHW_SOFTINTCLEAR); -} - -void __init bcmring_init_irq(void) -{ - vic_init((void __iomem *)MM_IO_BASE_INTC0, &bcmring_irq0_chip, - IRQ_INTC0_START, IRQ_INTC0_VALID_MASK); - vic_init((void __iomem *)MM_IO_BASE_INTC1, &bcmring_irq1_chip, - IRQ_INTC1_START, IRQ_INTC1_VALID_MASK); - vic_init((void __iomem *)MM_IO_BASE_SINTC, &bcmring_irq2_chip, - IRQ_SINTC_START, IRQ_SINTC_VALID_MASK); - - /* special cases */ - if (INTCHW_INTC1_GPIO0 & IRQ_INTC1_VALID_MASK) { - irq_set_handler(IRQ_GPIO0, handle_simple_irq); - } - if (INTCHW_INTC1_GPIO1 & IRQ_INTC1_VALID_MASK) { - irq_set_handler(IRQ_GPIO1, handle_simple_irq); - } -} diff --git a/arch/arm/mach-bcmring/mm.c b/arch/arm/mach-bcmring/mm.c deleted file mode 100644 index 1adec78ec940ef7a620a23e88752a1f6c0c2d642..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/mm.c +++ /dev/null @@ -1,60 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#include -#include -#include -#include - -#include -#include - -#define IO_DESC(va, sz) { .virtual = va, \ - .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \ - .length = sz, \ - .type = MT_DEVICE } - -#define MEM_DESC(va, sz) { .virtual = va, \ - .pfn = __phys_to_pfn(HW_IO_VIRT_TO_PHYS(va)), \ - .length = sz, \ - .type = MT_MEMORY } - -static struct map_desc bcmring_io_desc[] __initdata = { - IO_DESC(MM_IO_BASE_NAND, SZ_64K), /* phys:0x28000000-0x28000FFF virt:0xE8000000-0xE8000FFF size:0x00010000 */ - IO_DESC(MM_IO_BASE_UMI, SZ_64K), /* phys:0x2C000000-0x2C000FFF virt:0xEC000000-0xEC000FFF size:0x00010000 */ - - IO_DESC(MM_IO_BASE_BROM, SZ_64K), /* phys:0x30000000-0x3000FFFF virt:0xF3000000-0xF300FFFF size:0x00010000 */ - MEM_DESC(MM_IO_BASE_ARAM, SZ_1M), /* phys:0x31000000-0x31FFFFFF virt:0xF3100000-0xF31FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_DMA0, SZ_1M), /* phys:0x32000000-0x32FFFFFF virt:0xF3200000-0xF32FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_DMA1, SZ_1M), /* phys:0x33000000-0x33FFFFFF virt:0xF3300000-0xF33FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_ESW, SZ_1M), /* phys:0x34000000-0x34FFFFFF virt:0xF3400000-0xF34FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_CLCD, SZ_1M), /* phys:0x35000000-0x35FFFFFF virt:0xF3500000-0xF35FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_APM, SZ_1M), /* phys:0x36000000-0x36FFFFFF virt:0xF3600000-0xF36FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_SPUM, SZ_1M), /* phys:0x37000000-0x37FFFFFF virt:0xF3700000-0xF37FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_VPM_PROG, SZ_1M), /* phys:0x38000000-0x38FFFFFF virt:0xF3800000-0xF38FFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_VPM_DATA, SZ_1M), /* phys:0x3A000000-0x3AFFFFFF virt:0xF3A00000-0xF3AFFFFF size:0x01000000 */ - - IO_DESC(MM_IO_BASE_VRAM, SZ_64K), /* phys:0x40000000-0x4000FFFF virt:0xF4000000-0xF400FFFF size:0x00010000 */ - IO_DESC(MM_IO_BASE_CHIPC, SZ_16M), /* phys:0x80000000-0x80FFFFFF virt:0xF8000000-0xF8FFFFFF size:0x01000000 */ - IO_DESC(MM_IO_BASE_VPM_EXTMEM_RSVD, - SZ_16M), /* phys:0x0F000000-0x0FFFFFFF virt:0xF0000000-0xF0FFFFFF size:0x01000000 */ -}; - -void __init bcmring_map_io(void) -{ - - iotable_init(bcmring_io_desc, ARRAY_SIZE(bcmring_io_desc)); - /* Maximum DMA memory allowed is 14M */ - init_consistent_dma_size(14 << 20); -} diff --git a/arch/arm/mach-bcmring/timer.c b/arch/arm/mach-bcmring/timer.c deleted file mode 100644 index af9c3d7e2a0cbb6758b9acbc6e343498f06ee0bf..0000000000000000000000000000000000000000 --- a/arch/arm/mach-bcmring/timer.c +++ /dev/null @@ -1,61 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2008 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -#include -#include -#include - -#include -/* The core.c file initializes timers 1 and 3 as a linux clocksource. */ -/* The real time clock should probably be the real linux clocksource. */ -/* In the meantime, this file should agree with core.c as to the */ -/* profiling timer. If the clocksource is moved to rtc later, then */ -/* we can init the profiling timer here instead. */ - -/* Timer 1 provides 25MHz resolution syncrhonized to scheduling and APM timing */ -/* Timer 3 provides bus freqeuncy sychronized to ACLK, but spread spectrum will */ -/* affect synchronization with scheduling and APM timing. */ - -#define PROF_TIMER 1 - -timer_tick_rate_t timer_get_tick_rate(void) -{ - return tmrHw_getCountRate(PROF_TIMER); -} - -timer_tick_count_t timer_get_tick_count(void) -{ - return tmrHw_GetCurrentCount(PROF_TIMER); /* change downcounter to upcounter */ -} - -timer_msec_t timer_ticks_to_msec(timer_tick_count_t ticks) -{ - static int tickRateMsec; - - if (tickRateMsec == 0) { - tickRateMsec = timer_get_tick_rate() / 1000; - } - - return ticks / tickRateMsec; -} - -timer_msec_t timer_get_msec(void) -{ - return timer_ticks_to_msec(timer_get_tick_count()); -} - -EXPORT_SYMBOL(timer_get_tick_count); -EXPORT_SYMBOL(timer_ticks_to_msec); -EXPORT_SYMBOL(timer_get_tick_rate); -EXPORT_SYMBOL(timer_get_msec); diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index ea036d6215815b9d277c19902468d75b07d586e8..e6135363765a014fb4566b403f4619b3adaf4dee 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -16,12 +16,6 @@ config ARCH_CDB89712 The board includes 2 serial ports, Ethernet, IRDA, and expansion headers. It comes with 16 MB SDRAM and 8 MB flash ROM. -config ARCH_CEIVA - bool "CEIVA" - help - Say Y here if you intend to run this kernel on the Ceiva/Polaroid - PhotoMax Digital Picture Frame. - config ARCH_CLEP7312 bool "CLEP7312" help diff --git a/arch/arm/mach-clps711x/Makefile b/arch/arm/mach-clps711x/Makefile index f2f0256232e3bbbf4f4ac045697e2151f7be7db7..6da6940b3656afe6df6b8136f7be11e21302de5e 100644 --- a/arch/arm/mach-clps711x/Makefile +++ b/arch/arm/mach-clps711x/Makefile @@ -9,12 +9,9 @@ obj-m := obj-n := obj- := -obj-$(CONFIG_ARCH_CEIVA) += ceiva.o obj-$(CONFIG_ARCH_AUTCPU12) += autcpu12.o obj-$(CONFIG_ARCH_CDB89712) += cdb89712.o obj-$(CONFIG_ARCH_CLEP7312) += clep7312.o obj-$(CONFIG_ARCH_EDB7211) += edb7211-arch.o edb7211-mm.o obj-$(CONFIG_ARCH_FORTUNET) += fortunet.o obj-$(CONFIG_ARCH_P720T) += p720t.o -leds-$(CONFIG_ARCH_P720T) += p720t-leds.o -obj-$(CONFIG_LEDS) += $(leds-y) diff --git a/arch/arm/mach-clps711x/ceiva.c b/arch/arm/mach-clps711x/ceiva.c deleted file mode 100644 index a70147e347ac99516990871761e1c8d72c69aba5..0000000000000000000000000000000000000000 --- a/arch/arm/mach-clps711x/ceiva.c +++ /dev/null @@ -1,64 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/arch-ceiva.c - * - * Copyright (C) 2002, Rob Scott - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include - -#include -#include -#include - -#include - -#include -#include -#include -#include - -#include - -#include "common.h" - -static struct map_desc ceiva_io_desc[] __initdata = { - /* SED1355 controlled video RAM & registers */ - { - .virtual = CEIVA_VIRT_SED1355, - .pfn = __phys_to_pfn(CEIVA_PHYS_SED1355), - .length = SZ_2M, - .type = MT_DEVICE - } -}; - - -static void __init ceiva_map_io(void) -{ - clps711x_map_io(); - iotable_init(ceiva_io_desc, ARRAY_SIZE(ceiva_io_desc)); -} - - -MACHINE_START(CEIVA, "CEIVA/Polaroid Photo MAX Digital Picture Frame") - /* Maintainer: Rob Scott */ - .atag_offset = 0x100, - .map_io = ceiva_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, - .restart = clps711x_restart, -MACHINE_END diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index f15293bd797437805dd7fcf20a6ac062512144ec..509243d89a32aafdb2644c1e5d33753efb921465 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -19,24 +19,25 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ -#include -#include +#include #include #include -#include #include -#include +#include +#include +#include #include -#include -#include -#include -#include -#include #include #include #include +#include + +static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh, + *clk_tint, *clk_spi; +static unsigned long latch; + /* * This maps the generic CLPS711x registers */ @@ -166,8 +167,8 @@ void __init clps711x_init_irq(void) static unsigned long clps711x_gettimeoffset(void) { unsigned long hwticks; - hwticks = LATCH - (clps_readl(TC2D) & 0xffff); /* since last underflow */ - return (hwticks * (tick_nsec / 1000)) / LATCH; + hwticks = latch - (clps_readl(TC2D) & 0xffff); + return (hwticks * (tick_nsec / 1000)) / latch; } /* @@ -185,15 +186,71 @@ static struct irqaction clps711x_timer_irq = { .handler = p720t_timer_interrupt, }; +static void add_fixed_clk(struct clk *clk, const char *name, int rate) +{ + clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate); + clk_register_clkdev(clk, name, NULL); +} + static void __init clps711x_timer_init(void) { - unsigned int syscon; + int osc, ext, pll, cpu, bus, timl, timh, uart, spi; + u32 tmp; + + osc = 3686400; + ext = 13000000; + + tmp = clps_readl(PLLR) >> 24; + if (tmp) + pll = (osc * tmp) / 2; + else + pll = 73728000; /* Default value */ + + tmp = clps_readl(SYSFLG2); + if (tmp & SYSFLG2_CKMODE) { + cpu = ext; + bus = cpu; + spi = 135400; + } else { + cpu = pll; + if (cpu >= 36864000) + bus = cpu / 2; + else + bus = 36864000 / 2; + spi = cpu / 576; + } + + uart = bus / 10; + + if (tmp & SYSFLG2_CKMODE) { + tmp = clps_readl(SYSCON2); + if (tmp & SYSCON2_OSTB) + timh = ext / 26; + else + timh = 541440; + } else + timh = cpu / 144; + + timl = timh / 256; + + /* All clocks are fixed */ + add_fixed_clk(clk_pll, "pll", pll); + add_fixed_clk(clk_bus, "bus", bus); + add_fixed_clk(clk_uart, "uart", uart); + add_fixed_clk(clk_timerl, "timer_lf", timl); + add_fixed_clk(clk_timerh, "timer_hf", timh); + add_fixed_clk(clk_tint, "tint", 64); + add_fixed_clk(clk_spi, "spi", spi); + + pr_info("CPU frequency set at %i Hz.\n", cpu); + + latch = (timh + HZ / 2) / HZ; - syscon = clps_readl(SYSCON1); - syscon |= SYSCON1_TC2S | SYSCON1_TC2M; - clps_writel(syscon, SYSCON1); + tmp = clps_readl(SYSCON1); + tmp |= SYSCON1_TC2S | SYSCON1_TC2M; + clps_writel(tmp, SYSCON1); - clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */ + clps_writel(latch - 1, TC2D); setup_irq(IRQ_TC2OI, &clps711x_timer_irq); } diff --git a/arch/arm/mach-clps711x/include/mach/clps711x.h b/arch/arm/mach-clps711x/include/mach/clps711x.h index 1dd806f2847eae3fa67646fd015841dd88c1d3f2..c82e21ca49c758f30b260a1230d64e93ccf502c0 100644 --- a/arch/arm/mach-clps711x/include/mach/clps711x.h +++ b/arch/arm/mach-clps711x/include/mach/clps711x.h @@ -31,8 +31,8 @@ #define PBDDR (0x0041) #define PCDDR (0x0042) #define PDDDR (0x0043) -#define PEDR (0x0080) -#define PEDDR (0x00c0) +#define PEDR (0x0083) +#define PEDDR (0x00c3) #define SYSCON1 (0x0100) #define SYSFLG1 (0x0140) #define MEMCFG1 (0x0180) @@ -77,7 +77,7 @@ #define KBDEOI (0x1700) #define DAIR (0x2000) -#define DAIR0 (0x2040) +#define DAIDR0 (0x2040) #define DAIDR1 (0x2080) #define DAIDR2 (0x20c0) #define DAISR (0x2100) @@ -191,8 +191,7 @@ #define UBRLCR_WRDLEN8 (3 << 17) #define UBRLCR_WRDLEN_MASK (3 << 17) -#define SYNCIO_FRMLEN(x) (((x) & 0x3f) << 7) -#define SYNCIO_CFGLEN(x) ((x) & 0x7f) +#define SYNCIO_FRMLEN(x) (((x) & 0x1f) << 8) #define SYNCIO_SMCKEN (1 << 13) #define SYNCIO_TXFRMEN (1 << 14) diff --git a/arch/arm/mach-clps711x/include/mach/debug-macro.S b/arch/arm/mach-clps711x/include/mach/debug-macro.S index 118b3d9305730c2d213e15bd9fc1a10e773735b2..cb3684f8dae01ec887083388220f0e0a7696ca27 100644 --- a/arch/arm/mach-clps711x/include/mach/debug-macro.S +++ b/arch/arm/mach-clps711x/include/mach/debug-macro.S @@ -28,17 +28,11 @@ .endm .macro waituart,rd,rx -1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx - tst \rd, #1 << 11 @ UBUSYx - bne 1001b .endm .macro busyuart,rd,rx - tst \rx, #0x1000 @ UART2 does not have CTS here - bne 1002f 1001: ldr \rd, [\rx, #0x0140] @ SYSFLGx - tst \rd, #1 << 8 @ CTS + tst \rd, #1 << 11 @ UBUSYx bne 1001b -1002: .endm diff --git a/arch/arm/mach-clps711x/include/mach/hardware.h b/arch/arm/mach-clps711x/include/mach/hardware.h index 13a64fcd7dd1d737ee478f0646bd6d5ef046fd78..8497775d6ee5d8f8da9a5cda8356b01677e7f5eb 100644 --- a/arch/arm/mach-clps711x/include/mach/hardware.h +++ b/arch/arm/mach-clps711x/include/mach/hardware.h @@ -116,7 +116,6 @@ #endif /* CONFIG_ARCH_EDB7211 */ - /* * Relevant bits in port D, which controls power to the various parts of * the LCD on the EDB7211. @@ -125,51 +124,4 @@ #define EDB_PD2_LCDEN (1<<2) #define EDB_PD3_LCDBL (1<<3) - -#if defined (CONFIG_ARCH_CEIVA) - -/* - * The two flash banks are wired to chip selects 0 and 1. This is the mapping - * for them. - * - * nCS0 and nCS1 are at 0x70000000 and 0x60000000, respectively, when running - * in jumpered boot mode. - */ -#define CEIVA_PHYS_FLASH1 CS0_PHYS_BASE /* physical */ -#define CEIVA_PHYS_FLASH2 CS1_PHYS_BASE /* physical */ - -#define CEIVA_VIRT_FLASH1 (0xfa000000) /* virtual */ -#define CEIVA_VIRT_FLASH2 (0xfb000000) /* virtual */ - -#define CEIVA_FLASH_SIZE 0x100000 -#define CEIVA_FLASH_WIDTH 2 - -/* - * SED1355 LCD controller - */ -#define CEIVA_PHYS_SED1355 CS2_PHYS_BASE -#define CEIVA_VIRT_SED1355 (0xfc000000) - -/* - * Relevant bits in port D, which controls power to the various parts of - * the LCD on the Ceiva Photo Max, and reset to the LCD controller. - */ - -// Reset line to SED1355 (must be high to operate) -#define CEIVA_PD1_LCDRST (1<<1) -// LCD panel enable (set to one, to enable LCD) -#define CEIVA_PD4_LCDEN (1<<4) -// Backlight (set to one, to turn on backlight -#define CEIVA_PD5_LCDBL (1<<5) - -/* - * Relevant bits in port B, which report the status of the buttons. - */ - -// White button -#define CEIVA_PB4_WHT_BTN (1<<4) -// Black button -#define CEIVA_PB0_BLK_BTN (1<<0) -#endif // #if defined (CONFIG_ARCH_CEIVA) - #endif diff --git a/arch/arm/mach-clps711x/include/mach/timex.h b/arch/arm/mach-clps711x/include/mach/timex.h index ac8823ccff9397c4510099bb426699c875bc03fd..de6fd192d1c33b5db0c6715592fd76e2334dcf34 100644 --- a/arch/arm/mach-clps711x/include/mach/timex.h +++ b/arch/arm/mach-clps711x/include/mach/timex.h @@ -1,23 +1,2 @@ -/* - * arch/arm/mach-clps711x/include/mach/timex.h - * - * Prospector 720T architecture timex specifications - * - * Copyright (C) 2000 Deep Blue Solutions Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - +/* Bogus value */ #define CLOCK_TICK_RATE 512000 diff --git a/arch/arm/mach-clps711x/p720t-leds.c b/arch/arm/mach-clps711x/p720t-leds.c deleted file mode 100644 index bbc449fbe14a42fee5e8da951171f4f53f89a6ad..0000000000000000000000000000000000000000 --- a/arch/arm/mach-clps711x/p720t-leds.c +++ /dev/null @@ -1,63 +0,0 @@ -/* - * linux/arch/arm/mach-clps711x/leds.c - * - * Integrator LED control routines - * - * Copyright (C) 2000 Deep Blue Solutions Ltd - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#include -#include -#include - -#include -#include -#include - -static void p720t_leds_event(led_event_t ledevt) -{ - unsigned long flags; - u32 pddr; - - local_irq_save(flags); - switch(ledevt) { - case led_idle_start: - break; - - case led_idle_end: - break; - - case led_timer: - pddr = clps_readb(PDDR); - clps_writeb(pddr ^ 1, PDDR); - break; - - default: - break; - } - - local_irq_restore(flags); -} - -static int __init leds_init(void) -{ - if (machine_is_p720t()) - leds_event = p720t_leds_event; - - return 0; -} - -arch_initcall(leds_init); diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index f266d90b9efc0e8a4cc79b92b8ece9214c31c2e7..b752b586fc2fd2c822677dd8009bd6256a998863 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -23,6 +23,8 @@ #include #include #include +#include +#include #include #include @@ -34,6 +36,8 @@ #include #include +#include + #include "common.h" /* @@ -107,6 +111,64 @@ static void __init p720t_init_early(void) } } +/* + * LED controled by CPLD + */ +#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) +static void p720t_led_set(struct led_classdev *cdev, + enum led_brightness b) +{ + u8 reg = clps_readb(PDDR); + + if (b != LED_OFF) + reg |= 0x1; + else + reg &= ~0x1; + + clps_writeb(reg, PDDR); +} + +static enum led_brightness p720t_led_get(struct led_classdev *cdev) +{ + u8 reg = clps_readb(PDDR); + + return (reg & 0x1) ? LED_FULL : LED_OFF; +} + +static int __init p720t_leds_init(void) +{ + + struct led_classdev *cdev; + int ret; + + if (!machine_is_p720t()) + return -ENODEV; + + cdev = kzalloc(sizeof(*cdev), GFP_KERNEL); + if (!cdev) + return -ENOMEM; + + cdev->name = "p720t:0"; + cdev->brightness_set = p720t_led_set; + cdev->brightness_get = p720t_led_get; + cdev->default_trigger = "heartbeat"; + + ret = led_classdev_register(NULL, cdev); + if (ret < 0) { + kfree(cdev); + return ret; + } + + return 0; +} + +/* + * Since we may have triggers on any subsystem, defer registration + * until after subsystem_init. + */ +fs_initcall(p720t_leds_init); +#endif + MACHINE_START(P720T, "ARM-Prospector720T") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, diff --git a/arch/arm/mach-davinci/aemif.c b/arch/arm/mach-davinci/aemif.c index 1ce70a91f2e95bc5f6f44dc5d97a85a70f5bf028..f091a9010c2fb3b36ece218f87a228057edac487 100644 --- a/arch/arm/mach-davinci/aemif.c +++ b/arch/arm/mach-davinci/aemif.c @@ -15,7 +15,7 @@ #include #include -#include +#include /* Timing value configuration */ diff --git a/arch/arm/mach-davinci/asp.h b/arch/arm/mach-davinci/asp.h new file mode 100644 index 0000000000000000000000000000000000000000..d9b2acd12393ab0e8f4968403ce5ad901553d146 --- /dev/null +++ b/arch/arm/mach-davinci/asp.h @@ -0,0 +1,49 @@ +/* + * TI DaVinci Audio definitions + */ +#ifndef __ASM_ARCH_DAVINCI_ASP_H +#define __ASM_ARCH_DAVINCI_ASP_H + +/* Bases of dm644x and dm355 register banks */ +#define DAVINCI_ASP0_BASE 0x01E02000 +#define DAVINCI_ASP1_BASE 0x01E04000 + +/* Bases of dm365 register banks */ +#define DAVINCI_DM365_ASP0_BASE 0x01D02000 + +/* Bases of dm646x register banks */ +#define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000 +#define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800 + +/* Bases of da850/da830 McASP0 register banks */ +#define DAVINCI_DA8XX_MCASP0_REG_BASE 0x01D00000 + +/* Bases of da830 McASP1 register banks */ +#define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000 + +/* EDMA channels of dm644x and dm355 */ +#define DAVINCI_DMA_ASP0_TX 2 +#define DAVINCI_DMA_ASP0_RX 3 +#define DAVINCI_DMA_ASP1_TX 8 +#define DAVINCI_DMA_ASP1_RX 9 + +/* EDMA channels of dm646x */ +#define DAVINCI_DM646X_DMA_MCASP0_AXEVT0 6 +#define DAVINCI_DM646X_DMA_MCASP0_AREVT0 9 +#define DAVINCI_DM646X_DMA_MCASP1_AXEVT1 12 + +/* EDMA channels of da850/da830 McASP0 */ +#define DAVINCI_DA8XX_DMA_MCASP0_AREVT 0 +#define DAVINCI_DA8XX_DMA_MCASP0_AXEVT 1 + +/* EDMA channels of da830 McASP1 */ +#define DAVINCI_DA830_DMA_MCASP1_AREVT 2 +#define DAVINCI_DA830_DMA_MCASP1_AXEVT 3 + +/* Interrupts */ +#define DAVINCI_ASP0_RX_INT IRQ_MBRINT +#define DAVINCI_ASP0_TX_INT IRQ_MBXINT +#define DAVINCI_ASP1_RX_INT IRQ_MBRINT +#define DAVINCI_ASP1_TX_INT IRQ_MBXINT + +#endif /* __ASM_ARCH_DAVINCI_ASP_H */ diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c index 0031864e7f116908b23b94a0a7a1df8d13e33b69..95b5e102ceb1c34aaceb2031c59eea3e1e52e985 100644 --- a/arch/arm/mach-davinci/board-da830-evm.c +++ b/arch/arm/mach-davinci/board-da830-evm.c @@ -28,11 +28,11 @@ #include #include -#include +#include #include -#include -#include -#include +#include +#include +#include #define DA830_EVM_PHY_ID "" /* diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 0149fb453be3cd0f83b48cc4290d02d35038925c..1295e616ceee7e32a5b31d62b3cf52a4286578b3 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -40,10 +40,10 @@ #include #include -#include +#include #include -#include -#include +#include +#include #define DA850_EVM_PHY_ID "davinci_mdio-0:00" #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c index 1c7b1f46a8f3c3c42284c6e954526fe8b555fa2b..88ebea89abdf9cbbd9233527057397d297436b7b 100644 --- a/arch/arm/mach-davinci/board-dm355-evm.c +++ b/arch/arm/mach-davinci/board-dm355-evm.c @@ -26,11 +26,11 @@ #include #include -#include +#include #include -#include -#include -#include +#include +#include +#include #include "davinci.h" diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c index 8e7703213b0822102c8475afe9405865ec6ba8f6..2f88103c64595c1f68a3ad9f7ca026e0b8644741 100644 --- a/arch/arm/mach-davinci/board-dm355-leopard.c +++ b/arch/arm/mach-davinci/board-dm355-leopard.c @@ -23,11 +23,11 @@ #include #include -#include +#include #include -#include -#include -#include +#include +#include +#include #include "davinci.h" diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c index 688a9c556dc9081e518627095ad94f62724a98ad..1b4a8adcfdc9f1f86f87079c8ab8b009e0bc105a 100644 --- a/arch/arm/mach-davinci/board-dm365-evm.c +++ b/arch/arm/mach-davinci/board-dm365-evm.c @@ -33,11 +33,11 @@ #include #include -#include +#include #include -#include -#include -#include +#include +#include +#include #include diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index d34ed55912b2efd1217a0cb8d5a84bc5b271e232..ca72fc4b8ccaac489b3e5e4e800e84e73730149e 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -31,13 +31,13 @@ #include #include -#include +#include #include #include -#include -#include -#include -#include +#include +#include +#include +#include #include "davinci.h" diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 958679a20e13d3ec018e5b974ae35e1e17d400c0..9944367b4931b9a630a5bd91db7d6e784aebf75f 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -38,11 +38,11 @@ #include #include -#include -#include +#include +#include #include #include -#include +#include #include "davinci.h" #include "clock.h" diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c index beecde3a1d2f9a830362cb89aa9d6e7a249b9ae6..43e4a0d663fa8f15b002a50c0f7ac6a903b337b3 100644 --- a/arch/arm/mach-davinci/board-mityomapl138.c +++ b/arch/arm/mach-davinci/board-mityomapl138.c @@ -26,9 +26,9 @@ #include #include #include -#include +#include #include -#include +#include #define MITYOMAPL138_PHY_ID "" diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c index f6b9fc70161b43338772a9f092b589aecfb021df..144bf31d68ddd16a6fec1e3260f462d8ef1140f9 100644 --- a/arch/arm/mach-davinci/board-neuros-osd2.c +++ b/arch/arm/mach-davinci/board-neuros-osd2.c @@ -31,12 +31,12 @@ #include #include -#include +#include #include #include -#include -#include -#include +#include +#include +#include #include "davinci.h" diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c index 9078acf94bacfe211c8ec3ff24a427eae6f11895..6957787fa7f397a5670872c6b6562af60838aa32 100644 --- a/arch/arm/mach-davinci/board-sffsdr.c +++ b/arch/arm/mach-davinci/board-sffsdr.c @@ -36,10 +36,10 @@ #include #include -#include +#include #include #include -#include +#include #include "davinci.h" diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index ac4e003ad86336e61cb4774a0934f437bbfdfaca..be3099733b1fb2ab6eb857998cb4a2838a49ff70 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -88,7 +88,7 @@ static struct davinci_mmc_config mmc_config = { .version = MMC_CTLR_VERSION_1, }; -static const short sdio1_pins[] __initdata = { +static const short sdio1_pins[] __initconst = { TNETV107X_SDIO1_CLK_1, TNETV107X_SDIO1_CMD_1, TNETV107X_SDIO1_DATA0_1, TNETV107X_SDIO1_DATA1_1, TNETV107X_SDIO1_DATA2_1, TNETV107X_SDIO1_DATA3_1, @@ -96,12 +96,12 @@ static const short sdio1_pins[] __initdata = { -1 }; -static const short uart1_pins[] __initdata = { +static const short uart1_pins[] __initconst = { TNETV107X_UART1_RD, TNETV107X_UART1_TD, -1 }; -static const short ssp_pins[] __initdata = { +static const short ssp_pins[] __initconst = { TNETV107X_SSP0_0, TNETV107X_SSP0_1, TNETV107X_SSP0_2, TNETV107X_SSP1_0, TNETV107X_SSP1_1, TNETV107X_SSP1_2, TNETV107X_SSP1_3, -1 diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index deee5c2da7546b987be46b596b00bef4bbf04d1f..510648e0394b80d4f6186f93ae4516f7624d7dbb 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -838,7 +838,7 @@ static const struct mux_config da830_pins[] = { #endif }; -const short da830_emif25_pins[] __initdata = { +const short da830_emif25_pins[] __initconst = { DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3, DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7, DA830_EMA_D_8, DA830_EMA_D_9, DA830_EMA_D_10, DA830_EMA_D_11, @@ -853,19 +853,19 @@ const short da830_emif25_pins[] __initdata = { -1 }; -const short da830_spi0_pins[] __initdata = { +const short da830_spi0_pins[] __initconst = { DA830_SPI0_SOMI_0, DA830_SPI0_SIMO_0, DA830_SPI0_CLK, DA830_NSPI0_ENA, DA830_NSPI0_SCS_0, -1 }; -const short da830_spi1_pins[] __initdata = { +const short da830_spi1_pins[] __initconst = { DA830_SPI1_SOMI_0, DA830_SPI1_SIMO_0, DA830_SPI1_CLK, DA830_NSPI1_ENA, DA830_NSPI1_SCS_0, -1 }; -const short da830_mmc_sd_pins[] __initdata = { +const short da830_mmc_sd_pins[] __initconst = { DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2, DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5, DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK, @@ -873,32 +873,32 @@ const short da830_mmc_sd_pins[] __initdata = { -1 }; -const short da830_uart0_pins[] __initdata = { +const short da830_uart0_pins[] __initconst = { DA830_NUART0_CTS, DA830_NUART0_RTS, DA830_UART0_RXD, DA830_UART0_TXD, -1 }; -const short da830_uart1_pins[] __initdata = { +const short da830_uart1_pins[] __initconst = { DA830_UART1_RXD, DA830_UART1_TXD, -1 }; -const short da830_uart2_pins[] __initdata = { +const short da830_uart2_pins[] __initconst = { DA830_UART2_RXD, DA830_UART2_TXD, -1 }; -const short da830_usb20_pins[] __initdata = { +const short da830_usb20_pins[] __initconst = { DA830_USB0_DRVVBUS, DA830_USB_REFCLKIN, -1 }; -const short da830_usb11_pins[] __initdata = { +const short da830_usb11_pins[] __initconst = { DA830_USB_REFCLKIN, -1 }; -const short da830_uhpi_pins[] __initdata = { +const short da830_uhpi_pins[] __initconst = { DA830_UHPI_HD_0, DA830_UHPI_HD_1, DA830_UHPI_HD_2, DA830_UHPI_HD_3, DA830_UHPI_HD_4, DA830_UHPI_HD_5, DA830_UHPI_HD_6, DA830_UHPI_HD_7, DA830_UHPI_HD_8, DA830_UHPI_HD_9, DA830_UHPI_HD_10, DA830_UHPI_HD_11, @@ -909,14 +909,14 @@ const short da830_uhpi_pins[] __initdata = { -1 }; -const short da830_cpgmac_pins[] __initdata = { +const short da830_cpgmac_pins[] __initconst = { DA830_RMII_TXD_0, DA830_RMII_TXD_1, DA830_RMII_TXEN, DA830_RMII_CRS_DV, DA830_RMII_RXD_0, DA830_RMII_RXD_1, DA830_RMII_RXER, DA830_MDIO_CLK, DA830_MDIO_D, -1 }; -const short da830_emif3c_pins[] __initdata = { +const short da830_emif3c_pins[] __initconst = { DA830_EMB_SDCKE, DA830_EMB_CLK_GLUE, DA830_EMB_CLK, DA830_NEMB_CS_0, DA830_NEMB_CAS, DA830_NEMB_RAS, DA830_NEMB_WE, DA830_EMB_BA_1, DA830_EMB_BA_0, DA830_EMB_A_0, DA830_EMB_A_1, DA830_EMB_A_2, @@ -935,7 +935,7 @@ const short da830_emif3c_pins[] __initdata = { -1 }; -const short da830_mcasp0_pins[] __initdata = { +const short da830_mcasp0_pins[] __initconst = { DA830_AHCLKX0, DA830_ACLKX0, DA830_AFSX0, DA830_AHCLKR0, DA830_ACLKR0, DA830_AFSR0, DA830_AMUTE0, DA830_AXR0_0, DA830_AXR0_1, DA830_AXR0_2, DA830_AXR0_3, @@ -945,7 +945,7 @@ const short da830_mcasp0_pins[] __initdata = { -1 }; -const short da830_mcasp1_pins[] __initdata = { +const short da830_mcasp1_pins[] __initconst = { DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_ACLKR1, DA830_AFSR1, DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_3, @@ -954,24 +954,24 @@ const short da830_mcasp1_pins[] __initdata = { -1 }; -const short da830_mcasp2_pins[] __initdata = { +const short da830_mcasp2_pins[] __initconst = { DA830_AHCLKX2, DA830_ACLKX2, DA830_AFSX2, DA830_AHCLKR2, DA830_ACLKR2, DA830_AFSR2, DA830_AMUTE2, DA830_AXR2_0, DA830_AXR2_1, DA830_AXR2_2, DA830_AXR2_3, -1 }; -const short da830_i2c0_pins[] __initdata = { +const short da830_i2c0_pins[] __initconst = { DA830_I2C0_SDA, DA830_I2C0_SCL, -1 }; -const short da830_i2c1_pins[] __initdata = { +const short da830_i2c1_pins[] __initconst = { DA830_I2C1_SCL, DA830_I2C1_SDA, -1 }; -const short da830_lcdcntl_pins[] __initdata = { +const short da830_lcdcntl_pins[] __initconst = { DA830_LCD_D_0, DA830_LCD_D_1, DA830_LCD_D_2, DA830_LCD_D_3, DA830_LCD_D_4, DA830_LCD_D_5, DA830_LCD_D_6, DA830_LCD_D_7, DA830_LCD_D_8, DA830_LCD_D_9, DA830_LCD_D_10, DA830_LCD_D_11, @@ -981,34 +981,34 @@ const short da830_lcdcntl_pins[] __initdata = { -1 }; -const short da830_pwm_pins[] __initdata = { +const short da830_pwm_pins[] __initconst = { DA830_ECAP0_APWM0, DA830_ECAP1_APWM1, DA830_EPWM0B, DA830_EPWM0A, DA830_EPWMSYNCI, DA830_EPWMSYNC0, DA830_ECAP2_APWM2, DA830_EHRPWMGLUETZ, DA830_EPWM2B, DA830_EPWM2A, DA830_EPWM1B, DA830_EPWM1A, -1 }; -const short da830_ecap0_pins[] __initdata = { +const short da830_ecap0_pins[] __initconst = { DA830_ECAP0_APWM0, -1 }; -const short da830_ecap1_pins[] __initdata = { +const short da830_ecap1_pins[] __initconst = { DA830_ECAP1_APWM1, -1 }; -const short da830_ecap2_pins[] __initdata = { +const short da830_ecap2_pins[] __initconst = { DA830_ECAP2_APWM2, -1 }; -const short da830_eqep0_pins[] __initdata = { +const short da830_eqep0_pins[] __initconst = { DA830_EQEP0I, DA830_EQEP0S, DA830_EQEP0A, DA830_EQEP0B, -1 }; -const short da830_eqep1_pins[] __initdata = { +const short da830_eqep1_pins[] __initconst = { DA830_EQEP1I, DA830_EQEP1S, DA830_EQEP1A, DA830_EQEP1B, -1 }; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index b44dc844e15e0c2ce8c404486c75494749dfec51..6676dee7104ec6abdbc1b31fa82ae801a119a492 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -576,17 +576,17 @@ static const struct mux_config da850_pins[] = { #endif }; -const short da850_i2c0_pins[] __initdata = { +const short da850_i2c0_pins[] __initconst = { DA850_I2C0_SDA, DA850_I2C0_SCL, -1 }; -const short da850_i2c1_pins[] __initdata = { +const short da850_i2c1_pins[] __initconst = { DA850_I2C1_SCL, DA850_I2C1_SDA, -1 }; -const short da850_lcdcntl_pins[] __initdata = { +const short da850_lcdcntl_pins[] __initconst = { DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index 8db0fc6809ddd11c6874dbdf709044fad84ee06f..12d544befcfa36554d70931fcf0048e01ab212bd 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -22,10 +22,10 @@ #include #include #include - -#include -#include +#include +#include #include +#include #include #include diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 783eab6845c4ea6d56e0a9575b9e9cb89e5eaf84..bd2f72b414bce03c87b4921e2962ff709cf815e4 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -24,6 +24,7 @@ #include #include "clock.h" +#include "asp.h" #define DA8XX_TPCC_BASE 0x01c00000 #define DA8XX_TPTC0_BASE 0x01c08000 @@ -505,15 +506,8 @@ static struct platform_device da850_mcasp_device = { .resource = da850_mcasp_resources, }; -static struct platform_device davinci_pcm_device = { - .name = "davinci-pcm-audio", - .id = -1, -}; - void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) { - platform_device_register(&davinci_pcm_device); - /* DA830/OMAP-L137 has 3 instances of McASP */ if (cpu_is_davinci_da830() && id == 1) { da830_mcasp1_device.dev.platform_data = pdata; diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index d2f9666284a70868dcfe42346657c56fa82f9f9f..4c48a36ee567d6a98b2eb5d0a56ef9b51f2121b0 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -15,12 +15,12 @@ #include #include -#include +#include #include #include #include #include -#include +#include #include #include "davinci.h" @@ -313,16 +313,6 @@ static void davinci_init_wdt(void) /*-------------------------------------------------------------------------*/ -static struct platform_device davinci_pcm_device = { - .name = "davinci-pcm-audio", - .id = -1, -}; - -static void davinci_init_pcm(void) -{ - platform_device_register(&davinci_pcm_device); -} - /*-------------------------------------------------------------------------*/ struct davinci_timer_instance davinci_timer_instance[2] = { @@ -345,7 +335,6 @@ static int __init davinci_init_devices(void) /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - davinci_init_pcm(); davinci_init_wdt(); return 0; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index 678cd99b7336151b474580ccbb7eb1fe2ccfead5..a255434908dbcfebb1a1b8a3a946860db7e9f4bf 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -26,13 +26,13 @@ #include #include #include -#include -#include +#include #include #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" #define DM355_UART2_BASE (IO_PHYS + 0x206000) diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index a50d49de1883394e5cc29ba317becb0ee5e6ceb7..b680c832e0ba87758f1f29aeb502109ce2699268 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -29,14 +29,14 @@ #include #include #include -#include -#include -#include +#include +#include #include #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index c8b866657fcbf1a2d240c3711fce4bba1093c775..0755d466221a6aad1b3c93056f5e39e314cfc034 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -23,12 +23,12 @@ #include #include #include -#include #include #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" /* * Device specific clocks diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 9eb87c1d1edd1e1deacefc64d240469987e2f0d6..97c0f8e555bd454edb83c4612bf31153816fa9e0 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -24,12 +24,12 @@ #include #include #include -#include #include #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" #define DAVINCI_VPIF_BASE (0x01C12000) diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index a2f1f274f1897f40bf4ae85f5f1bfc91063cf8e3..c9ee723c56f35a78628dc0a4a78c08bd63a4f6c3 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -16,15 +16,15 @@ #include #include #include +#include #include #include -#include -#include -#include -#include #include -#include +#include +#include +#include +#include extern void __iomem *da8xx_syscfg0_base; extern void __iomem *da8xx_syscfg1_base; diff --git a/arch/arm/mach-davinci/include/mach/tnetv107x.h b/arch/arm/mach-davinci/include/mach/tnetv107x.h index 83e5926f3c46966f29b01c227d343a64dc12a7da..1656a02e3edaf036026ce7c7d6e624982dd2d840 100644 --- a/arch/arm/mach-davinci/include/mach/tnetv107x.h +++ b/arch/arm/mach-davinci/include/mach/tnetv107x.h @@ -36,8 +36,8 @@ #include #include -#include -#include +#include +#include #include struct tnetv107x_device_info { diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 23d2b6d9fa63bd17bd1b81ebd10673f920aaff9e..f77b95336e2bd7b3d378c9539fa1b7d60b28a4bd 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -10,7 +10,7 @@ #include #include #include -#include +#include #define DAVINCI_USB_OTG_BASE 0x01c64000 diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index dd937c526a458980eac6ac03b352f8f548f070dd..00154e74ce6b11d892840315ddedd9366b73e86d 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -15,6 +15,13 @@ config MACH_CM_A510 Say 'Y' here if you want your kernel to support the CompuLab CM-A510 Board. +config MACH_DOVE_DT + bool "Marvell Dove Flattened Device Tree" + select USE_OF + help + Say 'Y' here if you want your kernel to support the + Marvell Dove using flattened device tree. + endmenu endif diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile index fa0f018560600b0e4a3d335240e805db4b482d7c..5e683baf96cffc53e0ac8410be6e7505d4fb8557 100644 --- a/arch/arm/mach-dove/Makefile +++ b/arch/arm/mach-dove/Makefile @@ -1,4 +1,4 @@ -obj-y += common.o addr-map.o irq.o pcie.o mpp.o - +obj-y += common.o addr-map.o irq.o mpp.o +obj-$(CONFIG_PCI) += pcie.o obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o obj-$(CONFIG_MACH_CM_A510) += cm-a510.o diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 4db5de54b6a7e1658639dc8888a79ec8cede8cc7..b37bef1d5ffad9828f6734eb9a50262327ea950d 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -16,6 +16,8 @@ #include #include #include +#include +#include #include #include #include @@ -24,41 +26,30 @@ #include #include #include +#include #include #include #include #include -#include +#include #include #include #include "common.h" -static int get_tclk(void); - /***************************************************************************** * I/O Address Mapping ****************************************************************************/ static struct map_desc dove_io_desc[] __initdata = { { - .virtual = DOVE_SB_REGS_VIRT_BASE, + .virtual = (unsigned long) DOVE_SB_REGS_VIRT_BASE, .pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE), .length = DOVE_SB_REGS_SIZE, .type = MT_DEVICE, }, { - .virtual = DOVE_NB_REGS_VIRT_BASE, + .virtual = (unsigned long) DOVE_NB_REGS_VIRT_BASE, .pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE), .length = DOVE_NB_REGS_SIZE, .type = MT_DEVICE, - }, { - .virtual = DOVE_PCIE0_IO_VIRT_BASE, - .pfn = __phys_to_pfn(DOVE_PCIE0_IO_PHYS_BASE), - .length = DOVE_PCIE0_IO_SIZE, - .type = MT_DEVICE, - }, { - .virtual = DOVE_PCIE1_IO_VIRT_BASE, - .pfn = __phys_to_pfn(DOVE_PCIE1_IO_PHYS_BASE), - .length = DOVE_PCIE1_IO_SIZE, - .type = MT_DEVICE, }, }; @@ -70,14 +61,69 @@ void __init dove_map_io(void) /***************************************************************************** * CLK tree ****************************************************************************/ +static int dove_tclk; + +static DEFINE_SPINLOCK(gating_lock); static struct clk *tclk; -static void __init clk_init(void) +static struct clk __init *dove_register_gate(const char *name, + const char *parent, u8 bit_idx) { - tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT, - get_tclk()); + return clk_register_gate(NULL, name, parent, 0, + (void __iomem *)CLOCK_GATING_CONTROL, + bit_idx, 0, &gating_lock); +} - orion_clkdev_init(tclk); +static void __init dove_clk_init(void) +{ + struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1; + struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma; + struct clk *xor0, *xor1, *ge, *gephy; + + tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT, + dove_tclk); + + usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0); + usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1); + sata = dove_register_gate("sata", "tclk", CLOCK_GATING_BIT_SATA); + pex0 = dove_register_gate("pex0", "tclk", CLOCK_GATING_BIT_PCIE0); + pex1 = dove_register_gate("pex1", "tclk", CLOCK_GATING_BIT_PCIE1); + sdio0 = dove_register_gate("sdio0", "tclk", CLOCK_GATING_BIT_SDIO0); + sdio1 = dove_register_gate("sdio1", "tclk", CLOCK_GATING_BIT_SDIO1); + nand = dove_register_gate("nand", "tclk", CLOCK_GATING_BIT_NAND); + camera = dove_register_gate("camera", "tclk", CLOCK_GATING_BIT_CAMERA); + i2s0 = dove_register_gate("i2s0", "tclk", CLOCK_GATING_BIT_I2S0); + i2s1 = dove_register_gate("i2s1", "tclk", CLOCK_GATING_BIT_I2S1); + crypto = dove_register_gate("crypto", "tclk", CLOCK_GATING_BIT_CRYPTO); + ac97 = dove_register_gate("ac97", "tclk", CLOCK_GATING_BIT_AC97); + pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA); + xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0); + xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1); + gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY); + ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE); + + orion_clkdev_add(NULL, "orion_spi.0", tclk); + orion_clkdev_add(NULL, "orion_spi.1", tclk); + orion_clkdev_add(NULL, "orion_wdt", tclk); + orion_clkdev_add(NULL, "mv64xxx_i2c.0", tclk); + + orion_clkdev_add(NULL, "orion-ehci.0", usb0); + orion_clkdev_add(NULL, "orion-ehci.1", usb1); + orion_clkdev_add(NULL, "mv643xx_eth.0", ge); + orion_clkdev_add("0", "sata_mv.0", sata); + orion_clkdev_add("0", "pcie", pex0); + orion_clkdev_add("1", "pcie", pex1); + orion_clkdev_add(NULL, "sdhci-dove.0", sdio0); + orion_clkdev_add(NULL, "sdhci-dove.1", sdio1); + orion_clkdev_add(NULL, "orion_nand", nand); + orion_clkdev_add(NULL, "cafe1000-ccic.0", camera); + orion_clkdev_add(NULL, "kirkwood-i2s.0", i2s0); + orion_clkdev_add(NULL, "kirkwood-i2s.1", i2s1); + orion_clkdev_add(NULL, "mv_crypto", crypto); + orion_clkdev_add(NULL, "dove-ac97", ac97); + orion_clkdev_add(NULL, "dove-pdma", pdma); + orion_clkdev_add(NULL, "mv_xor_shared.0", xor0); + orion_clkdev_add(NULL, "mv_xor_shared.1", xor1); } /***************************************************************************** @@ -102,7 +148,8 @@ void __init dove_ehci1_init(void) void __init dove_ge00_init(struct mv643xx_eth_platform_data *eth_data) { orion_ge00_init(eth_data, DOVE_GE00_PHYS_BASE, - IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR); + IRQ_DOVE_GE00_SUM, IRQ_DOVE_GE00_ERR, + 1600); } /***************************************************************************** @@ -187,22 +234,31 @@ void __init dove_init_early(void) orion_time_set_base(TIMER_VIRT_BASE); } -static int get_tclk(void) +static int __init dove_find_tclk(void) { - /* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */ return 166666667; } static void __init dove_timer_init(void) { + dove_tclk = dove_find_tclk(); orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, - IRQ_DOVE_BRIDGE, get_tclk()); + IRQ_DOVE_BRIDGE, dove_tclk); } struct sys_timer dove_timer = { .init = dove_timer_init, }; +/***************************************************************************** + * Cryptographic Engines and Security Accelerator (CESA) + ****************************************************************************/ +void __init dove_crypto_init(void) +{ + orion_crypto_init(DOVE_CRYPT_PHYS_BASE, DOVE_CESA_PHYS_BASE, + DOVE_CESA_SIZE, IRQ_DOVE_CRYPTO); +} + /***************************************************************************** * XOR 0 ****************************************************************************/ @@ -284,16 +340,16 @@ void __init dove_sdio1_init(void) void __init dove_init(void) { - printk(KERN_INFO "Dove 88AP510 SoC, "); - printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); + pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", + (dove_tclk + 499999) / 1000000); #ifdef CONFIG_CACHE_TAUROS2 - tauros2_init(); + tauros2_init(0); #endif dove_setup_cpu_mbus(); /* Setup root of clk tree */ - clk_init(); + dove_clk_init(); /* internal devices that every board has */ dove_rtc_init(); @@ -316,3 +372,67 @@ void dove_restart(char mode, const char *cmd) while (1) ; } + +#if defined(CONFIG_MACH_DOVE_DT) +/* + * Auxdata required until real OF clock provider + */ +struct of_dev_auxdata dove_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL), + OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), + OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL), + OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL), + OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL), + {}, +}; + +static struct mv643xx_eth_platform_data dove_dt_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, +}; + +static void __init dove_dt_init(void) +{ + pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", + (dove_tclk + 499999) / 1000000); + +#ifdef CONFIG_CACHE_TAUROS2 + tauros2_init(); +#endif + dove_setup_cpu_mbus(); + + /* Setup root of clk tree */ + dove_clk_init(); + + /* Internal devices not ported to DT yet */ + dove_rtc_init(); + dove_xor0_init(); + dove_xor1_init(); + + dove_ge00_init(&dove_dt_ge00_data); + dove_ehci0_init(); + dove_ehci1_init(); + dove_pcie_init(1, 1); + dove_crypto_init(); + + of_platform_populate(NULL, of_default_bus_match_table, + dove_auxdata_lookup, NULL); +} + +static const char * const dove_dt_board_compat[] = { + "marvell,dove", + NULL +}; + +DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") + .map_io = dove_map_io, + .init_early = dove_init_early, + .init_irq = orion_dt_init_irq, + .timer = &dove_timer, + .init_machine = dove_dt_init, + .restart = dove_restart, + .dt_compat = dove_dt_board_compat, +MACHINE_END +#endif diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h index 6432a3ba864b7058ecc81dcc3df5b90f897bb4d5..1a233404b7355990fd1158da7e598e8f3125c541 100644 --- a/arch/arm/mach-dove/common.h +++ b/arch/arm/mach-dove/common.h @@ -26,7 +26,11 @@ void dove_init_irq(void); void dove_setup_cpu_mbus(void); void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data); void dove_sata_init(struct mv_sata_platform_data *sata_data); +#ifdef CONFIG_PCI void dove_pcie_init(int init_port0, int init_port1); +#else +static inline void dove_pcie_init(int init_port0, int init_port1) { } +#endif void dove_ehci0_init(void); void dove_ehci1_init(void); void dove_uart0_init(void); diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h index f953bb54aa9d31d590791d97aaaf770aaaecfd93..99f259e8cf33133b73f2b9712746cf7ade80fcbb 100644 --- a/arch/arm/mach-dove/include/mach/bridge-regs.h +++ b/arch/arm/mach-dove/include/mach/bridge-regs.h @@ -13,22 +13,22 @@ #include -#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0000) +#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0000) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) #define CPU_CTRL_PCIE0_LINK 0x00000001 #define CPU_RESET 0x00000002 #define CPU_CTRL_PCIE1_LINK 0x00000008 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) #define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) #define SOFT_RESET 0x00000001 #define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) #define IRQ_CAUSE_LOW_OFF 0x0000 #define IRQ_MASK_LOW_OFF 0x0004 #define FIQ_MASK_LOW_OFF 0x0008 @@ -47,9 +47,9 @@ #define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF) #define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF) -#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c) +#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE + 0x011c) -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) #endif diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index d52b0ef313b7e53c2efa6de67d0ddeddc4790ca5..661725e3115a5d37433aabb93cbf0be37a5049a8 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -25,7 +25,7 @@ */ #define DOVE_CESA_PHYS_BASE 0xc8000000 -#define DOVE_CESA_VIRT_BASE 0xfdb00000 +#define DOVE_CESA_VIRT_BASE IOMEM(0xfdb00000) #define DOVE_CESA_SIZE SZ_1M #define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000 @@ -38,101 +38,99 @@ #define DOVE_BOOTROM_SIZE SZ_128M #define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000 -#define DOVE_SCRATCHPAD_VIRT_BASE 0xfdd00000 +#define DOVE_SCRATCHPAD_VIRT_BASE IOMEM(0xfdd00000) #define DOVE_SCRATCHPAD_SIZE SZ_1M #define DOVE_SB_REGS_PHYS_BASE 0xf1000000 -#define DOVE_SB_REGS_VIRT_BASE 0xfde00000 +#define DOVE_SB_REGS_VIRT_BASE IOMEM(0xfde00000) #define DOVE_SB_REGS_SIZE SZ_8M #define DOVE_NB_REGS_PHYS_BASE 0xf1800000 -#define DOVE_NB_REGS_VIRT_BASE 0xfe600000 +#define DOVE_NB_REGS_VIRT_BASE IOMEM(0xfe600000) #define DOVE_NB_REGS_SIZE SZ_8M #define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000 -#define DOVE_PCIE0_IO_VIRT_BASE 0xfee00000 #define DOVE_PCIE0_IO_BUS_BASE 0x00000000 -#define DOVE_PCIE0_IO_SIZE SZ_1M +#define DOVE_PCIE0_IO_SIZE SZ_64K #define DOVE_PCIE1_IO_PHYS_BASE 0xf2100000 -#define DOVE_PCIE1_IO_VIRT_BASE 0xfef00000 -#define DOVE_PCIE1_IO_BUS_BASE 0x00100000 -#define DOVE_PCIE1_IO_SIZE SZ_1M +#define DOVE_PCIE1_IO_BUS_BASE 0x00010000 +#define DOVE_PCIE1_IO_SIZE SZ_64K /* * Dove Core Registers Map */ /* SPI, I2C, UART */ -#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x11000) -#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12000) -#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12000) -#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12100) -#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12100) -#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12200) -#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12200) -#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12300) -#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12300) -#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x10600) -#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x14600) +#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x11000) +#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12000) +#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12000) +#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12100) +#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12100) +#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12200) +#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12200) +#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12300) +#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12300) +#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x10600) +#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x14600) /* North-South Bridge */ -#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000) +#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x20000) +#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x20000) /* Cryptographic Engine */ -#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000) +#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x30000) /* PCIe 0 */ -#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x40000) +#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x40000) /* USB */ -#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x50000) -#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x51000) +#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x50000) +#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x51000) /* XOR 0 Engine */ -#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60800) -#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60800) -#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60A00) -#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60A00) +#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60800) +#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60800) +#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60A00) +#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60A00) /* XOR 1 Engine */ -#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60900) -#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60900) -#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60B00) -#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60B00) +#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60900) +#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60900) +#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60B00) +#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60B00) /* Gigabit Ethernet */ -#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x70000) +#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x70000) /* PCIe 1 */ -#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x80000) +#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x80000) /* CAFE */ -#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x92000) -#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x90000) -#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x94000) -#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x98000) +#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x92000) +#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x90000) +#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x94000) +#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x98000) /* SATA */ -#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xa0000) +#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xa0000) /* I2S/SPDIF */ -#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb0000) -#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb4000) +#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb0000) +#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb4000) /* NAND Flash Controller */ -#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xc0000) +#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xc0000) /* MPP, GPIO, Reset Sampling */ -#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200) +#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0200) #define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10) -#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014) -#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018) -#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400) -#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0420) -#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe8400) -#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c) +#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE + 0x014) +#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE + 0x018) +#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0400) +#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0420) +#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe8400) +#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe803c) #define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1) #define DOVE_NAND_GPIO_EN (1 << 0) #define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40) @@ -144,44 +142,44 @@ #define DOVE_SD0_GPIO_SEL (1 << 0) /* Power Management */ -#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000) +#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0000) #define DOVE_PMU_SIG_CTRL (DOVE_PMU_VIRT_BASE + 0x802c) /* Real Time Clock */ -#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500) +#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xd8500) /* AC97 */ -#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe0000) -#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe0000) +#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe0000) +#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe0000) /* Peripheral DMA */ -#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe4000) -#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe4000) +#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe4000) +#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe4000) -#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C) +#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE + 0xe802C) #define DOVE_TWSI_ENABLE_OPTION1 (1 << 7) -#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030) +#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE + 0xe8030) #define DOVE_TWSI_ENABLE_OPTION2 (1 << 20) #define DOVE_TWSI_ENABLE_OPTION3 (1 << 21) #define DOVE_TWSI_OPTION3_GPIO (1 << 22) -#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xec000) -#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034) +#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xec000) +#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE + 0xe8034) #define DOVE_SSP_ON_AU1 (1 << 0) #define DOVE_SSP_CLOCK_ENABLE (1 << 1) #define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11) /* Memory Controller */ -#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE | 0x00000) +#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE + 0x00000) /* LCD Controller */ -#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000) -#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x20000) -#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000) -#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x30000) +#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000) +#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x20000) +#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000) +#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x30000) /* Graphic Engine */ -#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x40000) +#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x40000) /* Video Engine */ -#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x400000) +#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x400000) #endif diff --git a/arch/arm/mach-dove/include/mach/gpio.h b/arch/arm/mach-dove/include/mach/gpio.h deleted file mode 100644 index e7e5101e35a5587ec9f8d88ad008198937edcfea..0000000000000000000000000000000000000000 --- a/arch/arm/mach-dove/include/mach/gpio.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/gpio.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include diff --git a/arch/arm/mach-dove/include/mach/io.h b/arch/arm/mach-dove/include/mach/io.h deleted file mode 100644 index 29c8b85355a5243db77f468d32d80d6695993468..0000000000000000000000000000000000000000 --- a/arch/arm/mach-dove/include/mach/io.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/mach-dove/include/mach/io.h - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#ifndef __ASM_ARCH_IO_H -#define __ASM_ARCH_IO_H - -#include "dove.h" - -#define IO_SPACE_LIMIT 0xffffffff - -#define __io(a) ((void __iomem *)(((a) - DOVE_PCIE0_IO_BUS_BASE) + \ - DOVE_PCIE0_IO_VIRT_BASE)) - -#endif diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h index 3ad9f946a9e8f8ef416aee2c4e8f5f29eb757c8c..7bcd0dfce4b1ce51b8b0e1bfc96ebcf9a0167d12 100644 --- a/arch/arm/mach-dove/include/mach/pm.h +++ b/arch/arm/mach-dove/include/mach/pm.h @@ -13,24 +13,42 @@ #include #define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38) -#define CLOCK_GATING_USB0_MASK (1 << 0) -#define CLOCK_GATING_USB1_MASK (1 << 1) -#define CLOCK_GATING_GBE_MASK (1 << 2) -#define CLOCK_GATING_SATA_MASK (1 << 3) -#define CLOCK_GATING_PCIE0_MASK (1 << 4) -#define CLOCK_GATING_PCIE1_MASK (1 << 5) -#define CLOCK_GATING_SDIO0_MASK (1 << 8) -#define CLOCK_GATING_SDIO1_MASK (1 << 9) -#define CLOCK_GATING_NAND_MASK (1 << 10) -#define CLOCK_GATING_CAMERA_MASK (1 << 11) -#define CLOCK_GATING_I2S0_MASK (1 << 12) -#define CLOCK_GATING_I2S1_MASK (1 << 13) -#define CLOCK_GATING_CRYPTO_MASK (1 << 15) -#define CLOCK_GATING_AC97_MASK (1 << 21) -#define CLOCK_GATING_PDMA_MASK (1 << 22) -#define CLOCK_GATING_XOR0_MASK (1 << 23) -#define CLOCK_GATING_XOR1_MASK (1 << 24) -#define CLOCK_GATING_GIGA_PHY_MASK (1 << 30) +#define CLOCK_GATING_BIT_USB0 0 +#define CLOCK_GATING_BIT_USB1 1 +#define CLOCK_GATING_BIT_GBE 2 +#define CLOCK_GATING_BIT_SATA 3 +#define CLOCK_GATING_BIT_PCIE0 4 +#define CLOCK_GATING_BIT_PCIE1 5 +#define CLOCK_GATING_BIT_SDIO0 8 +#define CLOCK_GATING_BIT_SDIO1 9 +#define CLOCK_GATING_BIT_NAND 10 +#define CLOCK_GATING_BIT_CAMERA 11 +#define CLOCK_GATING_BIT_I2S0 12 +#define CLOCK_GATING_BIT_I2S1 13 +#define CLOCK_GATING_BIT_CRYPTO 15 +#define CLOCK_GATING_BIT_AC97 21 +#define CLOCK_GATING_BIT_PDMA 22 +#define CLOCK_GATING_BIT_XOR0 23 +#define CLOCK_GATING_BIT_XOR1 24 +#define CLOCK_GATING_BIT_GIGA_PHY 30 +#define CLOCK_GATING_USB0_MASK (1 << CLOCK_GATING_BIT_USB0) +#define CLOCK_GATING_USB1_MASK (1 << CLOCK_GATING_BIT_USB1) +#define CLOCK_GATING_GBE_MASK (1 << CLOCK_GATING_BIT_GBE) +#define CLOCK_GATING_SATA_MASK (1 << CLOCK_GATING_BIT_SATA) +#define CLOCK_GATING_PCIE0_MASK (1 << CLOCK_GATING_BIT_PCIE0) +#define CLOCK_GATING_PCIE1_MASK (1 << CLOCK_GATING_BIT_PCIE1) +#define CLOCK_GATING_SDIO0_MASK (1 << CLOCK_GATING_BIT_SDIO0) +#define CLOCK_GATING_SDIO1_MASK (1 << CLOCK_GATING_BIT_SDIO1) +#define CLOCK_GATING_NAND_MASK (1 << CLOCK_GATING_BIT_NAND) +#define CLOCK_GATING_CAMERA_MASK (1 << CLOCK_GATING_BIT_CAMERA) +#define CLOCK_GATING_I2S0_MASK (1 << CLOCK_GATING_BIT_I2S0) +#define CLOCK_GATING_I2S1_MASK (1 << CLOCK_GATING_BIT_I2S1) +#define CLOCK_GATING_CRYPTO_MASK (1 << CLOCK_GATING_BIT_CRYPTO) +#define CLOCK_GATING_AC97_MASK (1 << CLOCK_GATING_BIT_AC97) +#define CLOCK_GATING_PDMA_MASK (1 << CLOCK_GATING_BIT_PDMA) +#define CLOCK_GATING_XOR0_MASK (1 << CLOCK_GATING_BIT_XOR0) +#define CLOCK_GATING_XOR1_MASK (1 << CLOCK_GATING_BIT_XOR1) +#define CLOCK_GATING_GIGA_PHY_MASK (1 << CLOCK_GATING_BIT_GIGA_PHY) #define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50) #define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54) diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 9bc97a5baaa8d25a4e0f8e8901c7821d03dfc4d5..087711524e8a29d1e0d2de7c919bd705976ddbd7 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -18,6 +18,7 @@ #include #include #include +#include #include "common.h" static void pmu_irq_mask(struct irq_data *d) @@ -99,19 +100,19 @@ void __init dove_init_irq(void) { int i; - orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); - orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); + orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); + orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); /* * Initialize gpiolib for GPIOs 0-71. */ - orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0, + orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, IRQ_DOVE_GPIO_START, gpio0_irqs); - orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0, + orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 32, gpio1_irqs); - orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0, + orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 64, gpio2_irqs); /* diff --git a/arch/arm/mach-dove/mpp.c b/arch/arm/mach-dove/mpp.c index 7f70afc26f91b0f0e47a4056251c33d2d1211d61..60bd729a1ba5c590a324855215ce549dcc93b086 100644 --- a/arch/arm/mach-dove/mpp.c +++ b/arch/arm/mach-dove/mpp.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "mpp.h" struct dove_mpp_grp { diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index 47921b0cdc65177e8b198e6d441301cd6a00cd1e..bb15b26041cb7d6bd13a5ca4d5532cb66632e2cc 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -26,9 +26,8 @@ struct pcie_port { u8 root_bus_nr; void __iomem *base; spinlock_t conf_lock; - char io_space_name[16]; char mem_space_name[16]; - struct resource res[2]; + struct resource res; }; static struct pcie_port pcie_port[2]; @@ -53,24 +52,10 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) orion_pcie_setup(pp->base); - /* - * IORESOURCE_IO - */ - snprintf(pp->io_space_name, sizeof(pp->io_space_name), - "PCIe %d I/O", pp->index); - pp->io_space_name[sizeof(pp->io_space_name) - 1] = 0; - pp->res[0].name = pp->io_space_name; - if (pp->index == 0) { - pp->res[0].start = DOVE_PCIE0_IO_PHYS_BASE; - pp->res[0].end = pp->res[0].start + DOVE_PCIE0_IO_SIZE - 1; - } else { - pp->res[0].start = DOVE_PCIE1_IO_PHYS_BASE; - pp->res[0].end = pp->res[0].start + DOVE_PCIE1_IO_SIZE - 1; - } - pp->res[0].flags = IORESOURCE_IO; - if (request_resource(&ioport_resource, &pp->res[0])) - panic("Request PCIe IO resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[0], sys->io_offset); + if (pp->index == 0) + pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE0_IO_PHYS_BASE); + else + pci_ioremap_io(sys->busnr * SZ_64K, DOVE_PCIE1_IO_PHYS_BASE); /* * IORESOURCE_MEM @@ -78,18 +63,18 @@ static int __init dove_pcie_setup(int nr, struct pci_sys_data *sys) snprintf(pp->mem_space_name, sizeof(pp->mem_space_name), "PCIe %d MEM", pp->index); pp->mem_space_name[sizeof(pp->mem_space_name) - 1] = 0; - pp->res[1].name = pp->mem_space_name; + pp->res.name = pp->mem_space_name; if (pp->index == 0) { - pp->res[1].start = DOVE_PCIE0_MEM_PHYS_BASE; - pp->res[1].end = pp->res[1].start + DOVE_PCIE0_MEM_SIZE - 1; + pp->res.start = DOVE_PCIE0_MEM_PHYS_BASE; + pp->res.end = pp->res.start + DOVE_PCIE0_MEM_SIZE - 1; } else { - pp->res[1].start = DOVE_PCIE1_MEM_PHYS_BASE; - pp->res[1].end = pp->res[1].start + DOVE_PCIE1_MEM_SIZE - 1; + pp->res.start = DOVE_PCIE1_MEM_PHYS_BASE; + pp->res.end = pp->res.start + DOVE_PCIE1_MEM_SIZE - 1; } - pp->res[1].flags = IORESOURCE_MEM; - if (request_resource(&iomem_resource, &pp->res[1])) + pp->res.flags = IORESOURCE_MEM; + if (request_resource(&iomem_resource, &pp->res)) panic("Request PCIe Memory resource failed\n"); - pci_add_resource_offset(&sys->resources, &pp->res[1], sys->mem_offset); + pci_add_resource_offset(&sys->resources, &pp->res, sys->mem_offset); return 1; } @@ -197,20 +182,20 @@ static struct hw_pci dove_pci __initdata = { .map_irq = dove_pcie_map_irq, }; -static void __init add_pcie_port(int index, unsigned long base) +static void __init add_pcie_port(int index, void __iomem *base) { printk(KERN_INFO "Dove PCIe port %d: ", index); - if (orion_pcie_link_up((void __iomem *)base)) { + if (orion_pcie_link_up(base)) { struct pcie_port *pp = &pcie_port[num_pcie_ports++]; printk(KERN_INFO "link up\n"); pp->index = index; pp->root_bus_nr = -1; - pp->base = (void __iomem *)base; + pp->base = base; spin_lock_init(&pp->conf_lock); - memset(pp->res, 0, sizeof(pp->res)); + memset(&pp->res, 0, sizeof(pp->res)); } else { printk(KERN_INFO "link down, ignoring\n"); } diff --git a/arch/arm/mach-ebsa110/Makefile b/arch/arm/mach-ebsa110/Makefile index 6520ac83580260f7c134e465bf43c0e336c5a5b9..935e4af01a2769a7ab83282bda801389f36a4d50 100644 --- a/arch/arm/mach-ebsa110/Makefile +++ b/arch/arm/mach-ebsa110/Makefile @@ -4,9 +4,7 @@ # Object file lists. -obj-y := core.o io.o +obj-y := core.o io.o leds.o obj-m := obj-n := obj- := - -obj-$(CONFIG_LEDS) += leds.o diff --git a/arch/arm/mach-ebsa110/core.c b/arch/arm/mach-ebsa110/core.c index 6f8068692edf151ea4cbe01afc266fd334df5df8..f0fe6b5350e2abe1ca646a84c7b5997eaa0612ba 100644 --- a/arch/arm/mach-ebsa110/core.c +++ b/arch/arm/mach-ebsa110/core.c @@ -74,22 +74,22 @@ static struct map_desc ebsa110_io_desc[] __initdata = { * sparse external-decode ISAIO space */ { /* IRQ_STAT/IRQ_MCLR */ - .virtual = IRQ_STAT, + .virtual = (unsigned long)IRQ_STAT, .pfn = __phys_to_pfn(TRICK4_PHYS), .length = TRICK4_SIZE, .type = MT_DEVICE }, { /* IRQ_MASK/IRQ_MSET */ - .virtual = IRQ_MASK, + .virtual = (unsigned long)IRQ_MASK, .pfn = __phys_to_pfn(TRICK3_PHYS), .length = TRICK3_SIZE, .type = MT_DEVICE }, { /* SOFT_BASE */ - .virtual = SOFT_BASE, + .virtual = (unsigned long)SOFT_BASE, .pfn = __phys_to_pfn(TRICK1_PHYS), .length = TRICK1_SIZE, .type = MT_DEVICE }, { /* PIT_BASE */ - .virtual = PIT_BASE, + .virtual = (unsigned long)PIT_BASE, .pfn = __phys_to_pfn(TRICK0_PHYS), .length = TRICK0_SIZE, .type = MT_DEVICE diff --git a/arch/arm/mach-ebsa110/core.h b/arch/arm/mach-ebsa110/core.h index c93c9e43012dfc836ec00dd3ac2e6ce8ed952a24..afe137ee172eb63026cafa34ca15823ff93dcc3a 100644 --- a/arch/arm/mach-ebsa110/core.h +++ b/arch/arm/mach-ebsa110/core.h @@ -31,11 +31,11 @@ #define TRICK7_PHYS 0xf3c00000 /* Virtual addresses */ -#define PIT_BASE 0xfc000000 /* trick 0 */ -#define SOFT_BASE 0xfd000000 /* trick 1 */ -#define IRQ_MASK 0xfe000000 /* trick 3 - read */ -#define IRQ_MSET 0xfe000000 /* trick 3 - write */ -#define IRQ_STAT 0xff000000 /* trick 4 - read */ -#define IRQ_MCLR 0xff000000 /* trick 4 - write */ +#define PIT_BASE IOMEM(0xfc000000) /* trick 0 */ +#define SOFT_BASE IOMEM(0xfd000000) /* trick 1 */ +#define IRQ_MASK IOMEM(0xfe000000) /* trick 3 - read */ +#define IRQ_MSET IOMEM(0xfe000000) /* trick 3 - write */ +#define IRQ_STAT IOMEM(0xff000000) /* trick 4 - read */ +#define IRQ_MCLR IOMEM(0xff000000) /* trick 4 - write */ #endif diff --git a/arch/arm/mach-ebsa110/leds.c b/arch/arm/mach-ebsa110/leds.c index 99e14e3625003568f46f42bf1da6720163b1f588..0398258c20cd52f392bd0d312a07faeef582b2fc 100644 --- a/arch/arm/mach-ebsa110/leds.c +++ b/arch/arm/mach-ebsa110/leds.c @@ -1,52 +1,71 @@ /* - * linux/arch/arm/mach-ebsa110/leds.c + * Driver for the LED found on the EBSA110 machine + * Based on Versatile and RealView machine LED code * - * Copyright (C) 1998 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * EBSA-110 LED control routines. We use the led as follows: - * - * - Red - toggles state every 50 timer interrupts + * License terms: GNU General Public License (GPL) version 2 + * Author: Bryan Wu */ -#include -#include +#include #include +#include +#include +#include -#include -#include #include #include "core.h" -static spinlock_t leds_lock; - -static void ebsa110_leds_event(led_event_t ledevt) +#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) +static void ebsa110_led_set(struct led_classdev *cdev, + enum led_brightness b) { - unsigned long flags; + u8 reg = __raw_readb(SOFT_BASE); - spin_lock_irqsave(&leds_lock, flags); + if (b != LED_OFF) + reg |= 0x80; + else + reg &= ~0x80; - switch(ledevt) { - case led_timer: - *(volatile unsigned char *)SOFT_BASE ^= 128; - break; + __raw_writeb(reg, SOFT_BASE); +} - default: - break; - } +static enum led_brightness ebsa110_led_get(struct led_classdev *cdev) +{ + u8 reg = __raw_readb(SOFT_BASE); - spin_unlock_irqrestore(&leds_lock, flags); + return (reg & 0x80) ? LED_FULL : LED_OFF; } -static int __init leds_init(void) +static int __init ebsa110_leds_init(void) { - if (machine_is_ebsa110()) - leds_event = ebsa110_leds_event; + + struct led_classdev *cdev; + int ret; + + if (!machine_is_ebsa110()) + return -ENODEV; + + cdev = kzalloc(sizeof(*cdev), GFP_KERNEL); + if (!cdev) + return -ENOMEM; + + cdev->name = "ebsa110:0"; + cdev->brightness_set = ebsa110_led_set; + cdev->brightness_get = ebsa110_led_get; + cdev->default_trigger = "heartbeat"; + + ret = led_classdev_register(NULL, cdev); + if (ret < 0) { + kfree(cdev); + return ret; + } return 0; } -__initcall(leds_init); +/* + * Since we may have triggers on any subsystem, defer registration + * until after subsystem_init. + */ +fs_initcall(ebsa110_leds_init); +#endif diff --git a/arch/arm/mach-ep93xx/adssphere.c b/arch/arm/mach-ep93xx/adssphere.c index a472777e9eba4523acd0386af0595715c9bb16ee..41383bf03d4bcc1161aa8fc617786b5d5ead783a 100644 --- a/arch/arm/mach-ep93xx/adssphere.c +++ b/arch/arm/mach-ep93xx/adssphere.c @@ -13,6 +13,7 @@ #include #include #include +#include #include diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 4afe52aaaff3573e97e6d46ba479b56303445f89..e85bf17f2d2aee7b512aefd097dc9ed7fe63fdaf 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -36,9 +36,9 @@ #include #include -#include -#include -#include +#include +#include +#include #include #include diff --git a/arch/arm/mach-ep93xx/dma.c b/arch/arm/mach-ep93xx/dma.c index 16976d7bdc8a18bbe62694d01070bcea29f8c01a..d8bfd02f5047f732af84cae4483bd57be12edeb0 100644 --- a/arch/arm/mach-ep93xx/dma.c +++ b/arch/arm/mach-ep93xx/dma.c @@ -25,7 +25,7 @@ #include #include -#include +#include #include #include "soc.h" diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index 337ab7cf4c16fc81391883c435e2be66d1f44298..b8f53d57a2994c0972a07f80fdbf923f6b736ca1 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -35,8 +35,8 @@ #include #include -#include -#include +#include +#include #include #include diff --git a/arch/arm/mach-ep93xx/gesbc9312.c b/arch/arm/mach-ep93xx/gesbc9312.c index 437c3411115513156bf252c569a22ac636f3de0a..7fd705b5efe4890895800c97bf1cd9f6703b6b7a 100644 --- a/arch/arm/mach-ep93xx/gesbc9312.c +++ b/arch/arm/mach-ep93xx/gesbc9312.c @@ -13,6 +13,7 @@ #include #include #include +#include #include diff --git a/arch/arm/mach-ep93xx/simone.c b/arch/arm/mach-ep93xx/simone.c index 33dc07917417d4b5caf89c600ea9885c05fbb0bf..0eb3f17a6fa2ec3424c94740713305e8e433190b 100644 --- a/arch/arm/mach-ep93xx/simone.c +++ b/arch/arm/mach-ep93xx/simone.c @@ -22,7 +22,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-ep93xx/snappercl15.c b/arch/arm/mach-ep93xx/snappercl15.c index 01abd3516a772ef93afe3d68c0556f587b1bb180..50043eef1cf24001cc41323a9dd55355aeee3f68 100644 --- a/arch/arm/mach-ep93xx/snappercl15.c +++ b/arch/arm/mach-ep93xx/snappercl15.c @@ -28,7 +28,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-ep93xx/ts72xx.c b/arch/arm/mach-ep93xx/ts72xx.c index 75cab2d7ec73a6a4a4619d606a2f9c506501a957..3c4c233391dc43b0d730c80d60e5bdd3319418db 100644 --- a/arch/arm/mach-ep93xx/ts72xx.c +++ b/arch/arm/mach-ep93xx/ts72xx.c @@ -21,7 +21,6 @@ #include #include -#include #include #include @@ -29,30 +28,31 @@ #include #include "soc.h" +#include "ts72xx.h" static struct map_desc ts72xx_io_desc[] __initdata = { { - .virtual = TS72XX_MODEL_VIRT_BASE, + .virtual = (unsigned long)TS72XX_MODEL_VIRT_BASE, .pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE), .length = TS72XX_MODEL_SIZE, .type = MT_DEVICE, }, { - .virtual = TS72XX_OPTIONS_VIRT_BASE, + .virtual = (unsigned long)TS72XX_OPTIONS_VIRT_BASE, .pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE), .length = TS72XX_OPTIONS_SIZE, .type = MT_DEVICE, }, { - .virtual = TS72XX_OPTIONS2_VIRT_BASE, + .virtual = (unsigned long)TS72XX_OPTIONS2_VIRT_BASE, .pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE), .length = TS72XX_OPTIONS2_SIZE, .type = MT_DEVICE, }, { - .virtual = TS72XX_RTC_INDEX_VIRT_BASE, + .virtual = (unsigned long)TS72XX_RTC_INDEX_VIRT_BASE, .pfn = __phys_to_pfn(TS72XX_RTC_INDEX_PHYS_BASE), .length = TS72XX_RTC_INDEX_SIZE, .type = MT_DEVICE, }, { - .virtual = TS72XX_RTC_DATA_VIRT_BASE, + .virtual = (unsigned long)TS72XX_RTC_DATA_VIRT_BASE, .pfn = __phys_to_pfn(TS72XX_RTC_DATA_PHYS_BASE), .length = TS72XX_RTC_DATA_SIZE, .type = MT_DEVICE, diff --git a/arch/arm/mach-ep93xx/include/mach/ts72xx.h b/arch/arm/mach-ep93xx/ts72xx.h similarity index 89% rename from arch/arm/mach-ep93xx/include/mach/ts72xx.h rename to arch/arm/mach-ep93xx/ts72xx.h index f1397a13e76b87b563b4343c848a023f57e71f09..071feaa30adc6094a995738a0b812a7f0b7b5a34 100644 --- a/arch/arm/mach-ep93xx/include/mach/ts72xx.h +++ b/arch/arm/mach-ep93xx/ts72xx.h @@ -14,7 +14,7 @@ */ #define TS72XX_MODEL_PHYS_BASE 0x22000000 -#define TS72XX_MODEL_VIRT_BASE 0xfebff000 +#define TS72XX_MODEL_VIRT_BASE IOMEM(0xfebff000) #define TS72XX_MODEL_SIZE 0x00001000 #define TS72XX_MODEL_TS7200 0x00 @@ -26,7 +26,7 @@ #define TS72XX_OPTIONS_PHYS_BASE 0x22400000 -#define TS72XX_OPTIONS_VIRT_BASE 0xfebfe000 +#define TS72XX_OPTIONS_VIRT_BASE IOMEM(0xfebfe000) #define TS72XX_OPTIONS_SIZE 0x00001000 #define TS72XX_OPTIONS_COM2_RS485 0x02 @@ -34,18 +34,18 @@ #define TS72XX_OPTIONS2_PHYS_BASE 0x22800000 -#define TS72XX_OPTIONS2_VIRT_BASE 0xfebfd000 +#define TS72XX_OPTIONS2_VIRT_BASE IOMEM(0xfebfd000) #define TS72XX_OPTIONS2_SIZE 0x00001000 #define TS72XX_OPTIONS2_TS9420 0x04 #define TS72XX_OPTIONS2_TS9420_BOOT 0x02 -#define TS72XX_RTC_INDEX_VIRT_BASE 0xfebf9000 +#define TS72XX_RTC_INDEX_VIRT_BASE IOMEM(0xfebf9000) #define TS72XX_RTC_INDEX_PHYS_BASE 0x10800000 #define TS72XX_RTC_INDEX_SIZE 0x00001000 -#define TS72XX_RTC_DATA_VIRT_BASE 0xfebf8000 +#define TS72XX_RTC_DATA_VIRT_BASE IOMEM(0xfebf8000) #define TS72XX_RTC_DATA_PHYS_BASE 0x11700000 #define TS72XX_RTC_DATA_SIZE 0x00001000 diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c index 2905a4929bdc86972e66fa9a1e581681007e7772..ba92e25e3016163abbc8b83ef11f4753e0ffc940 100644 --- a/arch/arm/mach-ep93xx/vision_ep9307.c +++ b/arch/arm/mach-ep93xx/vision_ep9307.c @@ -30,8 +30,8 @@ #include #include -#include -#include +#include +#include #include #include diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index b5b4c8c9db11adfe4a78d642a910207846abffbe..4372075c551f922380dbd66467221584cd8c902c 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -221,6 +221,7 @@ config MACH_SMDKV310 select EXYNOS4_SETUP_KEYPAD select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY + select S3C24XX_PWM help Machine support for Samsung SMDKV310 @@ -348,6 +349,7 @@ config MACH_ORIGEN select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY + select S3C24XX_PWM help Machine support for ORIGEN based on Samsung EXYNOS4210 @@ -383,6 +385,7 @@ config MACH_SMDK4212 select EXYNOS4_SETUP_KEYPAD select EXYNOS4_SETUP_SDHCI select EXYNOS4_SETUP_USB_PHY + select S3C24XX_PWM help Machine support for Samsung SMDK4212 @@ -405,6 +408,8 @@ config MACH_EXYNOS4_DT select USE_OF select ARM_AMBA select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD + select PINCTRL + select PINCTRL_EXYNOS4 help Machine support for Samsung Exynos4 machine with device tree enabled. Select this if a fdt blob is available for the Exynos4 SoC based board. @@ -418,8 +423,8 @@ config MACH_EXYNOS5_DT select USE_OF select ARM_AMBA help - Machine support for Samsung Exynos4 machine with device tree enabled. - Select this if a fdt blob is available for the EXYNOS4 SoC based board. + Machine support for Samsung EXYNOS5 machine with device tree enabled. + Select this if a fdt blob is available for the EXYNOS5 SoC based board. if ARCH_EXYNOS4 diff --git a/arch/arm/mach-exynos/Makefile.boot b/arch/arm/mach-exynos/Makefile.boot index 31bd181b0514e2221f14fe3c8f778697ab8f32a3..b9862e22bf10a3ecc4ccca0c6e7ece16f3f3a2bb 100644 --- a/arch/arm/mach-exynos/Makefile.boot +++ b/arch/arm/mach-exynos/Makefile.boot @@ -1,5 +1,2 @@ zreladdr-y += 0x40008000 params_phys-y := 0x40000100 - -dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb -dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index 2f51293c18757712621bb26723f10d1ced8099dd..6a45c9a9abe9115503ffcac36c4baca4d22c563f 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -500,6 +500,10 @@ static struct clk exynos4_init_clocks_off[] = { .devname = "exynos4-fimc.3", .enable = exynos4_clk_ip_cam_ctrl, .ctrlbit = (1 << 3), + }, { + .name = "tsi", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 4), }, { .name = "hsmmc", .devname = "exynos4-sdhci.0", @@ -529,6 +533,14 @@ static struct clk exynos4_init_clocks_off[] = { .parent = &exynos4_clk_aclk_133.clk, .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 9), + }, { + .name = "onenand", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 15), + }, { + .name = "nfcon", + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 16), }, { .name = "dac", .devname = "s5p-sdo", @@ -614,6 +626,25 @@ static struct clk exynos4_init_clocks_off[] = { .devname = "samsung-i2s.2", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 21), + }, { + .name = "pcm", + .devname = "samsung-pcm.1", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 22), + }, { + .name = "pcm", + .devname = "samsung-pcm.2", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 23), + }, { + .name = "slimbus", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 25), + }, { + .name = "spdif", + .devname = "samsung-spdif", + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 26), }, { .name = "ac97", .devname = "samsung-ac97", diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index 774533c670667c1a7a8e16986e7ababa841ee48e..c44ca1ee1b8d0196de2ac413bad5af226bc83bc9 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -166,11 +166,6 @@ static int exynos5_clk_ip_gen_ctrl(struct clk *clk, int enable) return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GEN, clk, enable); } -static int exynos5_clk_ip_gps_ctrl(struct clk *clk, int enable) -{ - return s5p_gatectrl(EXYNOS5_CLKGATE_IP_GPS, clk, enable); -} - static int exynos5_clk_ip_mfc_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(EXYNOS5_CLKGATE_IP_MFC, clk, enable); @@ -552,6 +547,68 @@ static struct clksrc_clk exynos5_clk_aclk_66 = { .reg_div = { .reg = EXYNOS5_CLKDIV_TOP0, .shift = 0, .size = 3 }, }; +static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid = { + .clk = { + .name = "mout_aclk_300_gscl_mid", + }, + .sources = &exynos5_clkset_aclk, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 24, .size = 1 }, +}; + +static struct clk *exynos5_clkset_aclk_300_mid1_list[] = { + [0] = &exynos5_clk_sclk_vpll.clk, + [1] = &exynos5_clk_mout_cpll.clk, +}; + +static struct clksrc_sources exynos5_clkset_aclk_300_gscl_mid1 = { + .sources = exynos5_clkset_aclk_300_mid1_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_mid1_list), +}; + +static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl_mid1 = { + .clk = { + .name = "mout_aclk_300_gscl_mid1", + }, + .sources = &exynos5_clkset_aclk_300_gscl_mid1, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP1, .shift = 12, .size = 1 }, +}; + +static struct clk *exynos5_clkset_aclk_300_gscl_list[] = { + [0] = &exynos5_clk_mout_aclk_300_gscl_mid.clk, + [1] = &exynos5_clk_mout_aclk_300_gscl_mid1.clk, +}; + +static struct clksrc_sources exynos5_clkset_aclk_300_gscl = { + .sources = exynos5_clkset_aclk_300_gscl_list, + .nr_sources = ARRAY_SIZE(exynos5_clkset_aclk_300_gscl_list), +}; + +static struct clksrc_clk exynos5_clk_mout_aclk_300_gscl = { + .clk = { + .name = "mout_aclk_300_gscl", + }, + .sources = &exynos5_clkset_aclk_300_gscl, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP0, .shift = 25, .size = 1 }, +}; + +static struct clk *exynos5_clk_src_gscl_300_list[] = { + [0] = &clk_ext_xtal_mux, + [1] = &exynos5_clk_mout_aclk_300_gscl.clk, +}; + +static struct clksrc_sources exynos5_clk_src_gscl_300 = { + .sources = exynos5_clk_src_gscl_300_list, + .nr_sources = ARRAY_SIZE(exynos5_clk_src_gscl_300_list), +}; + +static struct clksrc_clk exynos5_clk_aclk_300_gscl = { + .clk = { + .name = "aclk_300_gscl", + }, + .sources = &exynos5_clk_src_gscl_300, + .reg_src = { .reg = EXYNOS5_CLKSRC_TOP3, .shift = 10, .size = 1 }, +}; + static struct clk exynos5_init_clocks_off[] = { { .name = "timers", @@ -569,34 +626,29 @@ static struct clk exynos5_init_clocks_off[] = { .enable = exynos5_clk_ip_peris_ctrl, .ctrlbit = (1 << 19), }, { - .name = "hsmmc", - .devname = "exynos4-sdhci.0", + .name = "biu", /* bus interface unit clock */ + .devname = "dw_mmc.0", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 12), }, { - .name = "hsmmc", - .devname = "exynos4-sdhci.1", + .name = "biu", + .devname = "dw_mmc.1", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 13), }, { - .name = "hsmmc", - .devname = "exynos4-sdhci.2", + .name = "biu", + .devname = "dw_mmc.2", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 14), }, { - .name = "hsmmc", - .devname = "exynos4-sdhci.3", + .name = "biu", + .devname = "dw_mmc.3", .parent = &exynos5_clk_aclk_200.clk, .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 15), - }, { - .name = "dwmci", - .parent = &exynos5_clk_aclk_200.clk, - .enable = exynos5_clk_ip_fsys_ctrl, - .ctrlbit = (1 << 16), }, { .name = "sata", .devname = "ahci", @@ -671,10 +723,6 @@ static struct clk exynos5_init_clocks_off[] = { .name = "usbotg", .enable = exynos5_clk_ip_fsys_ctrl, .ctrlbit = (1 << 7), - }, { - .name = "gps", - .enable = exynos5_clk_ip_gps_ctrl, - .ctrlbit = ((1 << 3) | (1 << 2) | (1 << 0)), }, { .name = "nfcon", .enable = exynos5_clk_ip_fsys_ctrl, @@ -763,6 +811,26 @@ static struct clk exynos5_init_clocks_off[] = { .parent = &exynos5_clk_aclk_66.clk, .enable = exynos5_clk_ip_peric_ctrl, .ctrlbit = (1 << 18), + }, { + .name = "gscl", + .devname = "exynos-gsc.0", + .enable = exynos5_clk_ip_gscl_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "gscl", + .devname = "exynos-gsc.1", + .enable = exynos5_clk_ip_gscl_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "gscl", + .devname = "exynos-gsc.2", + .enable = exynos5_clk_ip_gscl_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "gscl", + .devname = "exynos-gsc.3", + .enable = exynos5_clk_ip_gscl_ctrl, + .ctrlbit = (1 << 3), }, { .name = SYSMMU_CLOCK_NAME, .devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0), @@ -891,6 +959,13 @@ static struct clk exynos5_clk_mdma1 = { .ctrlbit = (1 << 4), }; +static struct clk exynos5_clk_fimd1 = { + .name = "fimd", + .devname = "exynos5-fb.1", + .enable = exynos5_clk_ip_disp1_ctrl, + .ctrlbit = (1 << 0), +}; + struct clk *exynos5_clkset_group_list[] = { [0] = &clk_ext_xtal_mux, [1] = NULL, @@ -1015,8 +1090,8 @@ static struct clksrc_clk exynos5_clk_sclk_uart3 = { static struct clksrc_clk exynos5_clk_sclk_mmc0 = { .clk = { - .name = "sclk_mmc", - .devname = "exynos4-sdhci.0", + .name = "ciu", /* card interface unit clock */ + .devname = "dw_mmc.0", .parent = &exynos5_clk_dout_mmc0.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 0), @@ -1026,8 +1101,8 @@ static struct clksrc_clk exynos5_clk_sclk_mmc0 = { static struct clksrc_clk exynos5_clk_sclk_mmc1 = { .clk = { - .name = "sclk_mmc", - .devname = "exynos4-sdhci.1", + .name = "ciu", + .devname = "dw_mmc.1", .parent = &exynos5_clk_dout_mmc1.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 4), @@ -1037,8 +1112,8 @@ static struct clksrc_clk exynos5_clk_sclk_mmc1 = { static struct clksrc_clk exynos5_clk_sclk_mmc2 = { .clk = { - .name = "sclk_mmc", - .devname = "exynos4-sdhci.2", + .name = "ciu", + .devname = "dw_mmc.2", .parent = &exynos5_clk_dout_mmc2.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 8), @@ -1048,8 +1123,8 @@ static struct clksrc_clk exynos5_clk_sclk_mmc2 = { static struct clksrc_clk exynos5_clk_sclk_mmc3 = { .clk = { - .name = "sclk_mmc", - .devname = "exynos4-sdhci.3", + .name = "ciu", + .devname = "dw_mmc.3", .parent = &exynos5_clk_dout_mmc3.clk, .enable = exynos5_clksrc_mask_fsys_ctrl, .ctrlbit = (1 << 12), @@ -1120,26 +1195,20 @@ static struct clksrc_clk exynos5_clk_sclk_spi2 = { .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 }, }; +struct clksrc_clk exynos5_clk_sclk_fimd1 = { + .clk = { + .name = "sclk_fimd", + .devname = "exynos5-fb.1", + .enable = exynos5_clksrc_mask_disp1_0_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 }, +}; + static struct clksrc_clk exynos5_clksrcs[] = { { - .clk = { - .name = "sclk_dwmci", - .parent = &exynos5_clk_dout_mmc4.clk, - .enable = exynos5_clksrc_mask_fsys_ctrl, - .ctrlbit = (1 << 16), - }, - .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS3, .shift = 8, .size = 8 }, - }, { - .clk = { - .name = "sclk_fimd", - .devname = "s3cfb.1", - .enable = exynos5_clksrc_mask_disp1_0_ctrl, - .ctrlbit = (1 << 0), - }, - .sources = &exynos5_clkset_group, - .reg_src = { .reg = EXYNOS5_CLKSRC_DISP1_0, .shift = 0, .size = 4 }, - .reg_div = { .reg = EXYNOS5_CLKDIV_DISP1_0, .shift = 0, .size = 4 }, - }, { .clk = { .name = "aclk_266_gscl", }, @@ -1225,6 +1294,10 @@ static struct clksrc_clk *exynos5_sysclks[] = { &exynos5_clk_aclk_266, &exynos5_clk_aclk_200, &exynos5_clk_aclk_166, + &exynos5_clk_aclk_300_gscl, + &exynos5_clk_mout_aclk_300_gscl, + &exynos5_clk_mout_aclk_300_gscl_mid, + &exynos5_clk_mout_aclk_300_gscl_mid1, &exynos5_clk_aclk_66_pre, &exynos5_clk_aclk_66, &exynos5_clk_dout_mmc0, @@ -1240,12 +1313,14 @@ static struct clksrc_clk *exynos5_sysclks[] = { &exynos5_clk_mdout_spi0, &exynos5_clk_mdout_spi1, &exynos5_clk_mdout_spi2, + &exynos5_clk_sclk_fimd1, }; static struct clk *exynos5_clk_cdev[] = { &exynos5_clk_pdma0, &exynos5_clk_pdma1, &exynos5_clk_mdma1, + &exynos5_clk_fimd1, }; static struct clksrc_clk *exynos5_clksrc_cdev[] = { @@ -1274,6 +1349,7 @@ static struct clk_lookup exynos5_clk_lookup[] = { CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1), CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1), + CLKDEV_INIT("exynos5-fb.1", "lcd", &exynos5_clk_fimd1), }; static unsigned long exynos5_epll_get_rate(struct clk *clk) diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 4eb39cdf75eab7b524ab090af5179315797107ce..715b690e5009608c9d9bfa42b1bb6e2d595b79ee 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -980,6 +980,32 @@ static int __init exynos_init_irq_eint(void) { int irq; +#ifdef CONFIG_PINCTRL_SAMSUNG + /* + * The Samsung pinctrl driver provides an integrated gpio/pinmux/pinconf + * functionality along with support for external gpio and wakeup + * interrupts. If the samsung pinctrl driver is enabled and includes + * the wakeup interrupt support, then the setting up external wakeup + * interrupts here can be skipped. This check here is temporary to + * allow exynos4 platforms that do not use Samsung pinctrl driver to + * co-exist with platforms that do. When all of the Samsung Exynos4 + * platforms switch over to using the pinctrl driver, the wakeup + * interrupt support code here can be completely removed. + */ + struct device_node *pctrl_np, *wkup_np; + const char *pctrl_compat = "samsung,pinctrl-exynos4210"; + const char *wkup_compat = "samsung,exynos4210-wakeup-eint"; + + for_each_compatible_node(pctrl_np, NULL, pctrl_compat) { + if (of_device_is_available(pctrl_np)) { + wkup_np = of_find_compatible_node(pctrl_np, NULL, + wkup_compat); + if (wkup_np) + return -ENODEV; + } + } +#endif + if (soc_is_exynos5250()) exynos_eint_base = ioremap(EXYNOS5_PA_GPIO1, SZ_4K); else diff --git a/arch/arm/mach-exynos/common.h b/arch/arm/mach-exynos/common.h index aed2eeb065179f46f5d9b374974020b96e0a05a2..dac146df79ac870fc02bb1d014d920ff9b2b1d60 100644 --- a/arch/arm/mach-exynos/common.h +++ b/arch/arm/mach-exynos/common.h @@ -14,6 +14,7 @@ extern struct sys_timer exynos4_timer; +struct map_desc; void exynos_init_io(struct map_desc *mach_desc, int size); void exynos4_init_irq(void); void exynos5_init_irq(void); @@ -59,4 +60,8 @@ void exynos4212_register_clocks(void); #define exynos4212_register_clocks() #endif +extern struct smp_operations exynos_smp_ops; + +extern void exynos_cpu_die(unsigned int cpu); + #endif /* __ARCH_ARM_MACH_EXYNOS_COMMON_H */ diff --git a/arch/arm/mach-exynos/dev-audio.c b/arch/arm/mach-exynos/dev-audio.c index b33a5b67b547a4b14b67c17e91cfc4404f8c9bd4..ae321c7cb15ffbbb8b233719b442d1f920cabdfd 100644 --- a/arch/arm/mach-exynos/dev-audio.c +++ b/arch/arm/mach-exynos/dev-audio.c @@ -16,7 +16,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-exynos/dev-ohci.c b/arch/arm/mach-exynos/dev-ohci.c index b8e75300c77d83883970d6d621a85e358c294a7d..14ed7951a2c64262f1528b85df3224528851437e 100644 --- a/arch/arm/mach-exynos/dev-ohci.c +++ b/arch/arm/mach-exynos/dev-ohci.c @@ -15,7 +15,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index 9c17a0a43858d84df39cab4ddc8d417ba1b644a5..f4d7dd20cdacdb31c2f99ea7b9c05b62e5b0a8ee 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -21,7 +21,7 @@ #include -extern volatile int pen_release; +#include "common.h" static inline void cpu_enter_lowpower(void) { @@ -95,17 +95,12 @@ static inline void platform_do_lowpower(unsigned int cpu, int *spurious) } } -int platform_cpu_kill(unsigned int cpu) -{ - return 1; -} - /* * platform-specific code to shutdown a CPU * * Called with IRQs disabled */ -void platform_cpu_die(unsigned int cpu) +void __ref exynos_cpu_die(unsigned int cpu) { int spurious = 0; @@ -124,12 +119,3 @@ void platform_cpu_die(unsigned int cpu) if (spurious) pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious); } - -int platform_cpu_disable(unsigned int cpu) -{ - /* - * we don't allow CPU 0 to be shutdown (it is still too special - * e.g. clock tick interrupts) - */ - return cpu == 0 ? -EPERM : 0; -} diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index c72b675b3e4b98f07dd26353d1dcbb3ee7ae12e6..8480849affb922789d73b597c81b76c6778a16ba 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -89,7 +89,7 @@ #define EXYNOS4_PA_L2CC 0x10502000 #define EXYNOS4_PA_MDMA0 0x10810000 -#define EXYNOS4_PA_MDMA1 0x12840000 +#define EXYNOS4_PA_MDMA1 0x12850000 #define EXYNOS4_PA_PDMA0 0x12680000 #define EXYNOS4_PA_PDMA1 0x12690000 #define EXYNOS5_PA_MDMA0 0x10800000 @@ -121,6 +121,11 @@ #define EXYNOS4_PA_SYSMMU_MFC_L 0x13620000 #define EXYNOS4_PA_SYSMMU_MFC_R 0x13630000 +#define EXYNOS5_PA_GSC0 0x13E00000 +#define EXYNOS5_PA_GSC1 0x13E10000 +#define EXYNOS5_PA_GSC2 0x13E20000 +#define EXYNOS5_PA_GSC3 0x13E30000 + #define EXYNOS5_PA_SYSMMU_MDMA1 0x10A40000 #define EXYNOS5_PA_SYSMMU_SSS 0x10A50000 #define EXYNOS5_PA_SYSMMU_2D 0x10A60000 @@ -131,7 +136,6 @@ #define EXYNOS5_PA_SYSMMU_JPEG 0x11F20000 #define EXYNOS5_PA_SYSMMU_IOP 0x12360000 #define EXYNOS5_PA_SYSMMU_RTIC 0x12370000 -#define EXYNOS5_PA_SYSMMU_GPS 0x12630000 #define EXYNOS5_PA_SYSMMU_ISP 0x13260000 #define EXYNOS5_PA_SYSMMU_DRC 0x12370000 #define EXYNOS5_PA_SYSMMU_SCALERC 0x13280000 @@ -173,6 +177,10 @@ #define EXYNOS4_PA_HSMMC(x) (0x12510000 + ((x) * 0x10000)) #define EXYNOS4_PA_DWMCI 0x12550000 +#define EXYNOS5_PA_DWMCI0 0x12200000 +#define EXYNOS5_PA_DWMCI1 0x12210000 +#define EXYNOS5_PA_DWMCI2 0x12220000 +#define EXYNOS5_PA_DWMCI3 0x12230000 #define EXYNOS4_PA_HSOTG 0x12480000 #define EXYNOS4_PA_USB_HSPHY 0x125B0000 diff --git a/arch/arm/mach-exynos/include/mach/sysmmu.h b/arch/arm/mach-exynos/include/mach/sysmmu.h index 998daf2add92d9548733bc21ebe2bc167fcbe8f0..88a4543b00012ce67e433c12190d885a829e50e3 100644 --- a/arch/arm/mach-exynos/include/mach/sysmmu.h +++ b/arch/arm/mach-exynos/include/mach/sysmmu.h @@ -58,7 +58,7 @@ static inline void platform_set_sysmmu( #endif #else /* !CONFIG_EXYNOS_DEV_SYSMMU */ -#define platform_set_sysmmu(dev, sysmmu) do { } while (0) +#define platform_set_sysmmu(sysmmu, dev) do { } while (0) #endif #define SYSMMU_CLOCK_DEVNAME(ipname, id) (SYSMMU_DEVNAME_BASE "." #id) diff --git a/arch/arm/mach-exynos/mach-armlex4210.c b/arch/arm/mach-exynos/mach-armlex4210.c index 5a3daa0168d85450b0aa3777fb965249d79ba735..3f37a5e8a1f450d4d4e6797d0570c51df5b2805c 100644 --- a/arch/arm/mach-exynos/mach-armlex4210.c +++ b/arch/arm/mach-exynos/mach-armlex4210.c @@ -199,6 +199,7 @@ static void __init armlex4210_machine_init(void) MACHINE_START(ARMLEX4210, "ARMLEX4210") /* Maintainer: Alim Akhtar */ .atag_offset = 0x100, + .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = armlex4210_map_io, .handle_irq = gic_handle_irq, diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index b2b5d5faa74854adea983f3b2b1b085b6d133540..e58d786faf78c773636f10b168415df2c0ac61ef 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -1,5 +1,5 @@ /* - * Samsung's Exynos4210 flattened device tree enabled machine + * Samsung's EXYNOS4 flattened device tree enabled machine * * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -36,7 +36,7 @@ * at some point, the drivers should be capable of parsing all the platform * data from the device tree. */ -static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { +static const struct of_dev_auxdata exynos4_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART0, "exynos4210-uart.0", NULL), OF_DEV_AUXDATA("samsung,exynos4210-uart", EXYNOS4_PA_UART1, @@ -55,6 +55,20 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { "exynos4-sdhci.3", NULL), OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0), "s3c2440-i2c.0", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(1), + "s3c2440-i2c.1", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(2), + "s3c2440-i2c.2", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(3), + "s3c2440-i2c.3", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(4), + "s3c2440-i2c.4", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(5), + "s3c2440-i2c.5", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(6), + "s3c2440-i2c.6", NULL), + OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(7), + "s3c2440-i2c.7", NULL), OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0, "exynos4210-spi.0", NULL), OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1, @@ -66,19 +80,19 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { {}, }; -static void __init exynos4210_dt_map_io(void) +static void __init exynos4_dt_map_io(void) { exynos_init_io(NULL, 0); s3c24xx_init_clocks(24000000); } -static void __init exynos4210_dt_machine_init(void) +static void __init exynos4_dt_machine_init(void) { of_platform_populate(NULL, of_default_bus_match_table, - exynos4210_auxdata_lookup, NULL); + exynos4_auxdata_lookup, NULL); } -static char const *exynos4210_dt_compat[] __initdata = { +static char const *exynos4_dt_compat[] __initdata = { "samsung,exynos4210", NULL }; @@ -86,11 +100,11 @@ static char const *exynos4210_dt_compat[] __initdata = { DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)") /* Maintainer: Thomas Abraham */ .init_irq = exynos4_init_irq, - .map_io = exynos4210_dt_map_io, + .map_io = exynos4_dt_map_io, .handle_irq = gic_handle_irq, - .init_machine = exynos4210_dt_machine_init, + .init_machine = exynos4_dt_machine_init, .init_late = exynos_init_late, .timer = &exynos4_timer, - .dt_compat = exynos4210_dt_compat, + .dt_compat = exynos4_dt_compat, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index ef770bc2318fcbd074387a6c5278a007f169773d..db1cd8eacf2820caeeb8700c8fca0a0d35951703 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -47,6 +47,14 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "s3c2440-i2c.0", NULL), OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1), "s3c2440-i2c.1", NULL), + OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI0, + "dw_mmc.0", NULL), + OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI1, + "dw_mmc.1", NULL), + OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI2, + "dw_mmc.2", NULL), + OF_DEV_AUXDATA("samsung,exynos5250-dw-mshc", EXYNOS5_PA_DWMCI3, + "dw_mmc.3", NULL), OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0, "exynos4210-spi.0", NULL), OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1, @@ -56,6 +64,14 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL), + OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC0, + "exynos-gsc.0", NULL), + OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC1, + "exynos-gsc.1", NULL), + OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC2, + "exynos-gsc.2", NULL), + OF_DEV_AUXDATA("samsung,exynos5-gsc", EXYNOS5_PA_GSC3, + "exynos-gsc.3", NULL), {}, }; @@ -79,6 +95,7 @@ static char const *exynos5250_dt_compat[] __initdata = { DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)") /* Maintainer: Kukjin Kim */ .init_irq = exynos5_init_irq, + .smp = smp_ops(exynos_smp_ops), .map_io = exynos5250_dt_map_io, .handle_irq = gic_handle_irq, .init_machine = exynos5250_dt_machine_init, diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index ea785fcaf6c3262892f26dc6a3a7264d22a2e3d3..480cd78f1920da5a1fdd62a0593b2231923ea53d 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -45,14 +45,14 @@ #include #include #include -#include +#include #include #include -#include +#include #include #include #include -#include +#include #include @@ -1383,6 +1383,7 @@ static void __init nuri_machine_init(void) MACHINE_START(NURI, "NURI") /* Maintainer: Kyungmin Park */ .atag_offset = 0x100, + .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = nuri_map_io, .handle_irq = gic_handle_irq, diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index 5ca80307d6d7789c9fe1781dd6d56658f64f72e5..67b50bb89c0f7d83deb9fd42fcba58e4c4b0b489 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #include #include @@ -35,15 +36,16 @@ #include #include #include -#include -#include +#include +#include #include #include #include #include #include +#include -#include +#include #include #include @@ -613,6 +615,10 @@ static struct platform_device origen_lcd_hv070wsa = { .dev.platform_data = &origen_lcd_hv070wsa_data, }; +static struct pwm_lookup origen_pwm_lookup[] = { + PWM_LOOKUP("s3c24xx-pwm.0", 0, "pwm-backlight.0", NULL), +}; + #ifdef CONFIG_DRM_EXYNOS static struct exynos_drm_fimd_pdata drm_fimd_pdata = { .panel = { @@ -734,6 +740,11 @@ static void __init origen_bt_setup(void) s3c_gpio_setpull(EXYNOS4_GPX2(2), S3C_GPIO_PULL_NONE); } +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + static void s5p_tv_setup(void) { /* Direct HPD to HDMI chip */ @@ -781,6 +792,7 @@ static void __init origen_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); #ifdef CONFIG_DRM_EXYNOS s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; @@ -791,6 +803,7 @@ static void __init origen_machine_init(void) platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); + pwm_add_table(origen_pwm_lookup, ARRAY_SIZE(origen_pwm_lookup)); samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data); origen_bt_setup(); @@ -799,6 +812,7 @@ static void __init origen_machine_init(void) MACHINE_START(ORIGEN, "ORIGEN") /* Maintainer: JeongHyeon Kim */ .atag_offset = 0x100, + .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = origen_map_io, .handle_irq = gic_handle_irq, diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index b26beb13ebef40ff03bb524a6a8a9e8733e7efe9..7a265d1a82d3e6e172799fe2dfc52d16b4217f7c 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -32,7 +33,7 @@ #include #include #include -#include +#include #include #include #include @@ -222,6 +223,10 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = { .pwm_period_ns = 1000, }; +static struct pwm_lookup smdk4x12_pwm_lookup[] = { + PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL), +}; + static uint32_t smdk4x12_keymap[] __initdata = { /* KEY(row, col, keycode) */ KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3), @@ -349,6 +354,7 @@ static void __init smdk4x12_machine_init(void) ARRAY_SIZE(smdk4x12_i2c_devs7)); samsung_bl_set(&smdk4x12_bl_gpio_info, &smdk4x12_bl_data); + pwm_add_table(smdk4x12_pwm_lookup, ARRAY_SIZE(smdk4x12_pwm_lookup)); samsung_keypad_set_platdata(&smdk4x12_keypad_data); @@ -370,6 +376,7 @@ static void __init smdk4x12_machine_init(void) MACHINE_START(SMDK4212, "SMDK4212") /* Maintainer: Kukjin Kim */ .atag_offset = 0x100, + .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = smdk4x12_map_io, .handle_irq = gic_handle_irq, @@ -383,6 +390,7 @@ MACHINE_START(SMDK4412, "SMDK4412") /* Maintainer: Kukjin Kim */ /* Maintainer: Changhwan Youn */ .atag_offset = 0x100, + .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = smdk4x12_map_io, .handle_irq = gic_handle_irq, diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 3cfa688d274a8bda5b5657924509d9d0726f41f6..c15d2238ceb017e40b44206951c26e4aaa7ff39c 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -34,15 +35,16 @@ #include #include #include -#include +#include #include #include #include -#include +#include #include +#include #include -#include +#include #include #include "common.h" @@ -354,6 +356,15 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +/* I2C module and id for HDMIPHY */ +static struct i2c_board_info hdmiphy_info = { + I2C_BOARD_INFO("hdmiphy-exynos4210", 0x38), +}; + +static struct pwm_lookup smdkv310_pwm_lookup[] = { + PWM_LOOKUP("s3c24xx-pwm.1", 0, "pwm-backlight.0", NULL), +}; + static void s5p_tv_setup(void) { /* direct HPD to HDMI chip */ @@ -388,10 +399,13 @@ static void __init smdkv310_machine_init(void) s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); + s5p_hdmi_set_platdata(&hdmiphy_info, NULL, 0); samsung_keypad_set_platdata(&smdkv310_keypad_data); samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data); + pwm_add_table(smdkv310_pwm_lookup, ARRAY_SIZE(smdkv310_pwm_lookup)); + #ifdef CONFIG_DRM_EXYNOS s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; exynos4_fimd0_gpio_setup_24bpp(); @@ -410,6 +424,7 @@ MACHINE_START(SMDKV310, "SMDKV310") /* Maintainer: Kukjin Kim */ /* Maintainer: Changhwan Youn */ .atag_offset = 0x100, + .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = smdkv310_map_io, .handle_irq = gic_handle_irq, @@ -422,6 +437,7 @@ MACHINE_END MACHINE_START(SMDKC210, "SMDKC210") /* Maintainer: Kukjin Kim */ .atag_offset = 0x100, + .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = smdkv310_map_io, .handle_irq = gic_handle_irq, diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index 4d1f40d44ed19686f129113e5903a9f137e139e6..98d3aced2289d246f42903dd2881d6f83054b5a6 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -34,7 +34,7 @@ #include #include #include -#include +#include #include #include #include @@ -43,7 +43,7 @@ #include #include #include -#include +#include #include @@ -1155,6 +1155,7 @@ static void __init universal_machine_init(void) MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") /* Maintainer: Kyungmin Park */ .atag_offset = 0x100, + .smp = smp_ops(exynos_smp_ops), .init_irq = exynos4_init_irq, .map_io = universal_map_io, .handle_irq = gic_handle_irq, diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 36c3984aaa47909e5e02b12a317cbe1f373897e2..f93d820ecab5793863c11d8c62b057aca7930f82 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -32,18 +32,13 @@ #include +#include "common.h" + extern void exynos4_secondary_startup(void); #define CPU1_BOOT_REG (samsung_rev() == EXYNOS4210_REV_1_1 ? \ S5P_INFORM5 : S5P_VA_SYSRAM) -/* - * control for which core is the next to come out of the secondary - * boot "holding pen" - */ - -volatile int __cpuinitdata pen_release = -1; - /* * Write pen_release in a way that is guaranteed to be visible to all * observers, irrespective of whether they're taking part in coherency @@ -64,7 +59,7 @@ static void __iomem *scu_base_addr(void) static DEFINE_SPINLOCK(boot_lock); -void __cpuinit platform_secondary_init(unsigned int cpu) +static void __cpuinit exynos_secondary_init(unsigned int cpu) { /* * if any interrupts are already enabled for the primary @@ -86,7 +81,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) spin_unlock(&boot_lock); } -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct *idle) { unsigned long timeout; @@ -139,7 +134,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) __raw_writel(virt_to_phys(exynos4_secondary_startup), CPU1_BOOT_REG); - gic_raise_softirq(cpumask_of(cpu), 1); + gic_raise_softirq(cpumask_of(cpu), 0); if (pen_release == -1) break; @@ -161,7 +156,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * which may be present or become present in the system. */ -void __init smp_init_cpus(void) +static void __init exynos_smp_init_cpus(void) { void __iomem *scu_base = scu_base_addr(); unsigned int i, ncores; @@ -184,7 +179,7 @@ void __init smp_init_cpus(void) set_smp_cross_call(gic_raise_softirq); } -void __init platform_smp_prepare_cpus(unsigned int max_cpus) +static void __init exynos_smp_prepare_cpus(unsigned int max_cpus) { if (!soc_is_exynos5250()) scu_enable(scu_base_addr()); @@ -198,3 +193,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) __raw_writel(virt_to_phys(exynos4_secondary_startup), CPU1_BOOT_REG); } + +struct smp_operations exynos_smp_ops __initdata = { + .smp_init_cpus = exynos_smp_init_cpus, + .smp_prepare_cpus = exynos_smp_prepare_cpus, + .smp_secondary_init = exynos_secondary_init, + .smp_boot_secondary = exynos_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = exynos_cpu_die, +#endif +}; diff --git a/arch/arm/mach-exynos/setup-i2c0.c b/arch/arm/mach-exynos/setup-i2c0.c index b90d94c17f7cbc7af586304047dd07e0f58d0496..5700f23629f7b62de31e9dc49765663dcf8e7911 100644 --- a/arch/arm/mach-exynos/setup-i2c0.c +++ b/arch/arm/mach-exynos/setup-i2c0.c @@ -14,7 +14,7 @@ struct platform_device; /* don't need the contents */ #include -#include +#include #include #include diff --git a/arch/arm/mach-exynos/setup-i2c1.c b/arch/arm/mach-exynos/setup-i2c1.c index fd7235a43f6e5d65038ab5239d11040a529cf49c..8d2279cc85dcc02ee64d6cb4a0073ad3ae854eb7 100644 --- a/arch/arm/mach-exynos/setup-i2c1.c +++ b/arch/arm/mach-exynos/setup-i2c1.c @@ -13,7 +13,7 @@ struct platform_device; /* don't need the contents */ #include -#include +#include #include void s3c_i2c1_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-exynos/setup-i2c2.c b/arch/arm/mach-exynos/setup-i2c2.c index 2694b19e8b37d83481ea6133c16fe3d9d5a6e685..0ed62fc42a7787cc28a12b6dfae53e02f8d24965 100644 --- a/arch/arm/mach-exynos/setup-i2c2.c +++ b/arch/arm/mach-exynos/setup-i2c2.c @@ -13,7 +13,7 @@ struct platform_device; /* don't need the contents */ #include -#include +#include #include void s3c_i2c2_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-exynos/setup-i2c3.c b/arch/arm/mach-exynos/setup-i2c3.c index 379bd306993f1e0e2894a6b81f09ca7758535d81..7787fd26076b5f07df4724e8d7a8c77f242669ec 100644 --- a/arch/arm/mach-exynos/setup-i2c3.c +++ b/arch/arm/mach-exynos/setup-i2c3.c @@ -13,7 +13,7 @@ struct platform_device; /* don't need the contents */ #include -#include +#include #include void s3c_i2c3_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-exynos/setup-i2c4.c b/arch/arm/mach-exynos/setup-i2c4.c index 9f3c04855b76eace120cf9c63eea371fd9141d59..edc847f89826b4deda460c67e49614dff443bb4e 100644 --- a/arch/arm/mach-exynos/setup-i2c4.c +++ b/arch/arm/mach-exynos/setup-i2c4.c @@ -13,7 +13,7 @@ struct platform_device; /* don't need the contents */ #include -#include +#include #include void s3c_i2c4_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-exynos/setup-i2c5.c b/arch/arm/mach-exynos/setup-i2c5.c index 77e1a1e57c762b927b61b2325cc8fa209c244be8..d88af7f75954d0d303a07d0c070c535ccc4575f6 100644 --- a/arch/arm/mach-exynos/setup-i2c5.c +++ b/arch/arm/mach-exynos/setup-i2c5.c @@ -13,7 +13,7 @@ struct platform_device; /* don't need the contents */ #include -#include +#include #include void s3c_i2c5_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-exynos/setup-i2c6.c b/arch/arm/mach-exynos/setup-i2c6.c index 284d12b7af0efbde5e318ddee0b8c9b8c3ca2c18..c590286c9d3a237b2fe3b2a166284e64e99a7368 100644 --- a/arch/arm/mach-exynos/setup-i2c6.c +++ b/arch/arm/mach-exynos/setup-i2c6.c @@ -13,7 +13,7 @@ struct platform_device; /* don't need the contents */ #include -#include +#include #include void s3c_i2c6_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-exynos/setup-i2c7.c b/arch/arm/mach-exynos/setup-i2c7.c index b7611ee359a209e498209f6ea1f8848afc50db59..1bba75568a5fabd426c2528b74570b5988cf7cfd 100644 --- a/arch/arm/mach-exynos/setup-i2c7.c +++ b/arch/arm/mach-exynos/setup-i2c7.c @@ -13,7 +13,7 @@ struct platform_device; /* don't need the contents */ #include -#include +#include #include void s3c_i2c7_cfg_gpio(struct platform_device *dev) diff --git a/arch/arm/mach-footbridge/Makefile b/arch/arm/mach-footbridge/Makefile index 3afb1b25946f96b88b5390ab2ec59414b53ba5b5..0b64dd430d6150317288302c94f3b11fa0f1762e 100644 --- a/arch/arm/mach-footbridge/Makefile +++ b/arch/arm/mach-footbridge/Makefile @@ -14,15 +14,11 @@ pci-$(CONFIG_ARCH_EBSA285_HOST) += ebsa285-pci.o pci-$(CONFIG_ARCH_NETWINDER) += netwinder-pci.o pci-$(CONFIG_ARCH_PERSONAL_SERVER) += personal-pci.o -leds-$(CONFIG_ARCH_EBSA285) += ebsa285-leds.o -leds-$(CONFIG_ARCH_NETWINDER) += netwinder-leds.o - obj-$(CONFIG_ARCH_CATS) += cats-hw.o isa-timer.o obj-$(CONFIG_ARCH_EBSA285) += ebsa285.o dc21285-timer.o obj-$(CONFIG_ARCH_NETWINDER) += netwinder-hw.o isa-timer.o obj-$(CONFIG_ARCH_PERSONAL_SERVER) += personal.o dc21285-timer.o obj-$(CONFIG_PCI) +=$(pci-y) -obj-$(CONFIG_LEDS) +=$(leds-y) obj-$(CONFIG_ISA) += isa.o isa-rtc.o diff --git a/arch/arm/mach-footbridge/common.c b/arch/arm/mach-footbridge/common.c index 3e6aaa6361da5095761b0adcd6a5d04549481bc4..a42b369bc43914ba9e00e7eff8e800278d2daef1 100644 --- a/arch/arm/mach-footbridge/common.c +++ b/arch/arm/mach-footbridge/common.c @@ -15,7 +15,7 @@ #include #include #include - + #include #include #include @@ -26,6 +26,7 @@ #include #include +#include #include "common.h" @@ -175,11 +176,6 @@ static struct map_desc ebsa285_host_io_desc[] __initdata = { .pfn = __phys_to_pfn(DC21285_PCI_IACK), .length = PCIIACK_SIZE, .type = MT_DEVICE, - }, { - .virtual = PCIO_BASE, - .pfn = __phys_to_pfn(DC21285_PCI_IO), - .length = PCIO_SIZE, - .type = MT_DEVICE, }, #endif }; @@ -196,8 +192,10 @@ void __init footbridge_map_io(void) * Now, work out what we've got to map in addition on this * platform. */ - if (footbridge_cfn_mode()) + if (footbridge_cfn_mode()) { iotable_init(ebsa285_host_io_desc, ARRAY_SIZE(ebsa285_host_io_desc)); + pci_map_io_early(__phys_to_pfn(DC21285_PCI_IO)); + } } void footbridge_restart(char mode, const char *cmd) diff --git a/arch/arm/mach-footbridge/dc21285.c b/arch/arm/mach-footbridge/dc21285.c index 9d62e338102486e38c1aa4a84af64da8a5434887..a7cd2cf5e08de32c2ceafc508559d3201919dcc4 100644 --- a/arch/arm/mach-footbridge/dc21285.c +++ b/arch/arm/mach-footbridge/dc21285.c @@ -276,8 +276,8 @@ int __init dc21285_setup(int nr, struct pci_sys_data *sys) sys->mem_offset = DC21285_PCI_MEM; - pci_add_resource_offset(&sys->resources, - &ioport_resource, sys->io_offset); + pci_ioremap_io(0, DC21285_PCI_IO); + pci_add_resource_offset(&sys->resources, &res[0], sys->mem_offset); pci_add_resource_offset(&sys->resources, &res[1], sys->mem_offset); @@ -298,7 +298,7 @@ void __init dc21285_preinit(void) mem_size = (unsigned int)high_memory - PAGE_OFFSET; for (mem_mask = 0x00100000; mem_mask < 0x10000000; mem_mask <<= 1) if (mem_mask >= mem_size) - break; + break; /* * These registers need to be set up whether we're the @@ -350,14 +350,6 @@ void __init dc21285_preinit(void) "PCI data parity", NULL); if (cfn_mode) { - static struct resource csrio; - - csrio.flags = IORESOURCE_IO; - csrio.name = "Footbridge"; - - allocate_resource(&ioport_resource, &csrio, 128, - 0xff00, 0xffff, 128, NULL, NULL); - /* * Map our SDRAM at a known address in PCI space, just in case * the firmware had other ideas. Using a nonzero base is @@ -365,7 +357,7 @@ void __init dc21285_preinit(void) * in the range 0x000a0000 to 0x000c0000. (eg, S3 cards). */ *CSR_PCICSRBASE = 0xf4000000; - *CSR_PCICSRIOBASE = csrio.start; + *CSR_PCICSRIOBASE = 0; *CSR_PCISDRAMBASE = __virt_to_bus(PAGE_OFFSET); *CSR_PCIROMBASE = 0; *CSR_PCICMD = PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | diff --git a/arch/arm/mach-footbridge/ebsa285-leds.c b/arch/arm/mach-footbridge/ebsa285-leds.c deleted file mode 100644 index 5bd266754b95f4eb571fd91eb14087418430039a..0000000000000000000000000000000000000000 --- a/arch/arm/mach-footbridge/ebsa285-leds.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * linux/arch/arm/mach-footbridge/ebsa285-leds.c - * - * Copyright (C) 1998-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * EBSA-285 control routines. - * - * The EBSA-285 uses the leds as follows: - * - Green - toggles state every 50 timer interrupts - * - Amber - On if system is not idle - * - Red - currently unused - * - * Changelog: - * 02-05-1999 RMK Various cleanups - */ -#include -#include -#include -#include - -#include -#include -#include - -#define LED_STATE_ENABLED 1 -#define LED_STATE_CLAIMED 2 -static char led_state; -static char hw_led_state; - -static DEFINE_SPINLOCK(leds_lock); - -static void ebsa285_leds_event(led_event_t evt) -{ - unsigned long flags; - - spin_lock_irqsave(&leds_lock, flags); - - switch (evt) { - case led_start: - hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN; -#ifndef CONFIG_LEDS_CPU - hw_led_state |= XBUS_LED_AMBER; -#endif - led_state |= LED_STATE_ENABLED; - break; - - case led_stop: - led_state &= ~LED_STATE_ENABLED; - break; - - case led_claim: - led_state |= LED_STATE_CLAIMED; - hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER; - break; - - case led_release: - led_state &= ~LED_STATE_CLAIMED; - hw_led_state = XBUS_LED_RED | XBUS_LED_GREEN | XBUS_LED_AMBER; - break; - -#ifdef CONFIG_LEDS_TIMER - case led_timer: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state ^= XBUS_LED_GREEN; - break; -#endif - -#ifdef CONFIG_LEDS_CPU - case led_idle_start: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state |= XBUS_LED_AMBER; - break; - - case led_idle_end: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state &= ~XBUS_LED_AMBER; - break; -#endif - - case led_halted: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state &= ~XBUS_LED_RED; - break; - - case led_green_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~XBUS_LED_GREEN; - break; - - case led_green_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= XBUS_LED_GREEN; - break; - - case led_amber_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~XBUS_LED_AMBER; - break; - - case led_amber_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= XBUS_LED_AMBER; - break; - - case led_red_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~XBUS_LED_RED; - break; - - case led_red_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= XBUS_LED_RED; - break; - - default: - break; - } - - if (led_state & LED_STATE_ENABLED) - *XBUS_LEDS = hw_led_state; - - spin_unlock_irqrestore(&leds_lock, flags); -} - -static int __init leds_init(void) -{ - if (machine_is_ebsa285()) - leds_event = ebsa285_leds_event; - - leds_event(led_start); - - return 0; -} - -__initcall(leds_init); diff --git a/arch/arm/mach-footbridge/ebsa285.c b/arch/arm/mach-footbridge/ebsa285.c index 27716a7e5fc16c88eab0bbf2bb4ad9a9f7b1df00..b09551ef89ca39163c7fa4823af36be57ca4f92c 100644 --- a/arch/arm/mach-footbridge/ebsa285.c +++ b/arch/arm/mach-footbridge/ebsa285.c @@ -5,6 +5,8 @@ */ #include #include +#include +#include #include #include @@ -13,6 +15,85 @@ #include "common.h" +/* LEDs */ +#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) +struct ebsa285_led { + struct led_classdev cdev; + u8 mask; +}; + +/* + * The triggers lines up below will only be used if the + * LED triggers are compiled in. + */ +static const struct { + const char *name; + const char *trigger; +} ebsa285_leds[] = { + { "ebsa285:amber", "heartbeat", }, + { "ebsa285:green", "cpu0", }, + { "ebsa285:red",}, +}; + +static void ebsa285_led_set(struct led_classdev *cdev, + enum led_brightness b) +{ + struct ebsa285_led *led = container_of(cdev, + struct ebsa285_led, cdev); + + if (b != LED_OFF) + *XBUS_LEDS |= led->mask; + else + *XBUS_LEDS &= ~led->mask; +} + +static enum led_brightness ebsa285_led_get(struct led_classdev *cdev) +{ + struct ebsa285_led *led = container_of(cdev, + struct ebsa285_led, cdev); + + return (*XBUS_LEDS & led->mask) ? LED_FULL : LED_OFF; +} + +static int __init ebsa285_leds_init(void) +{ + int i; + + if (machine_is_ebsa285()) + return -ENODEV; + + /* 3 LEDS All ON */ + *XBUS_LEDS |= XBUS_LED_AMBER | XBUS_LED_GREEN | XBUS_LED_RED; + + for (i = 0; i < ARRAY_SIZE(ebsa285_leds); i++) { + struct ebsa285_led *led; + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (!led) + break; + + led->cdev.name = ebsa285_leds[i].name; + led->cdev.brightness_set = ebsa285_led_set; + led->cdev.brightness_get = ebsa285_led_get; + led->cdev.default_trigger = ebsa285_leds[i].trigger; + led->mask = BIT(i); + + if (led_classdev_register(NULL, &led->cdev) < 0) { + kfree(led); + break; + } + } + + return 0; +} + +/* + * Since we may have triggers on any subsystem, defer registration + * until after subsystem_init. + */ +fs_initcall(ebsa285_leds_init); +#endif + MACHINE_START(EBSA285, "EBSA285") /* Maintainer: Russell King */ .atag_offset = 0x100, diff --git a/arch/arm/mach-footbridge/include/mach/debug-macro.S b/arch/arm/mach-footbridge/include/mach/debug-macro.S index e5acde25ffc5492249a3fefb52b6ef83d53a099b..c169f0c99b2a323ad2f88ff0f9d20fac4579a064 100644 --- a/arch/arm/mach-footbridge/include/mach/debug-macro.S +++ b/arch/arm/mach-footbridge/include/mach/debug-macro.S @@ -17,7 +17,8 @@ /* For NetWinder debugging */ .macro addruart, rp, rv, tmp mov \rp, #0x000003f8 - orr \rv, \rp, #0xff000000 @ virtual + orr \rv, \rp, #0xfe000000 @ virtual + orr \rv, \rv, #0x00e00000 @ virtual orr \rp, \rp, #0x7c000000 @ physical .endm diff --git a/arch/arm/mach-footbridge/include/mach/io.h b/arch/arm/mach-footbridge/include/mach/io.h index aba531eebbc6723cfe5ea69c31634caac46a160b..aba46388cc0c16ef450d66483e1e8ca78b123cf0 100644 --- a/arch/arm/mach-footbridge/include/mach/io.h +++ b/arch/arm/mach-footbridge/include/mach/io.h @@ -14,18 +14,10 @@ #ifndef __ASM_ARM_ARCH_IO_H #define __ASM_ARM_ARCH_IO_H -#ifdef CONFIG_MMU -#define MMU_IO(a, b) (a) -#else -#define MMU_IO(a, b) (b) -#endif - -#define PCIO_SIZE 0x00100000 -#define PCIO_BASE MMU_IO(0xff000000, 0x7c000000) - /* - * Translation of various region addresses to virtual addresses + * Translation of various i/o addresses to host addresses for !CONFIG_MMU */ +#define PCIO_BASE 0x7c000000 #define __io(a) ((void __iomem *)(PCIO_BASE + (a))) #endif diff --git a/arch/arm/mach-footbridge/netwinder-hw.c b/arch/arm/mach-footbridge/netwinder-hw.c index cac9f67e7da7e195f4bdb98aaa5d0f1808315c22..d2d14339c6c4b9cda4382a9c946ca847a0ce69b1 100644 --- a/arch/arm/mach-footbridge/netwinder-hw.c +++ b/arch/arm/mach-footbridge/netwinder-hw.c @@ -12,9 +12,10 @@ #include #include #include +#include +#include #include -#include #include #include #include @@ -27,13 +28,6 @@ #define GP1_IO_BASE 0x338 #define GP2_IO_BASE 0x33a - -#ifdef CONFIG_LEDS -#define DEFAULT_LEDS 0 -#else -#define DEFAULT_LEDS GPIO_GREEN_LED -#endif - /* * Winbond WB83977F accessibility stuff */ @@ -611,15 +605,9 @@ static void __init rwa010_init(void) static int __init nw_hw_init(void) { if (machine_is_netwinder()) { - unsigned long flags; - wb977_init(); cpld_init(); rwa010_init(); - - raw_spin_lock_irqsave(&nw_gpio_lock, flags); - nw_gpio_modify_op(GPIO_RED_LED|GPIO_GREEN_LED, DEFAULT_LEDS); - raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); } return 0; } @@ -672,6 +660,102 @@ static void netwinder_restart(char mode, const char *cmd) } } +/* LEDs */ +#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS) +struct netwinder_led { + struct led_classdev cdev; + u8 mask; +}; + +/* + * The triggers lines up below will only be used if the + * LED triggers are compiled in. + */ +static const struct { + const char *name; + const char *trigger; +} netwinder_leds[] = { + { "netwinder:green", "heartbeat", }, + { "netwinder:red", "cpu0", }, +}; + +/* + * The LED control in Netwinder is reversed: + * - setting bit means turn off LED + * - clearing bit means turn on LED + */ +static void netwinder_led_set(struct led_classdev *cdev, + enum led_brightness b) +{ + struct netwinder_led *led = container_of(cdev, + struct netwinder_led, cdev); + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&nw_gpio_lock, flags); + reg = nw_gpio_read(); + if (b != LED_OFF) + reg &= ~led->mask; + else + reg |= led->mask; + nw_gpio_modify_op(led->mask, reg); + spin_unlock_irqrestore(&nw_gpio_lock, flags); +} + +static enum led_brightness netwinder_led_get(struct led_classdev *cdev) +{ + struct netwinder_led *led = container_of(cdev, + struct netwinder_led, cdev); + unsigned long flags; + u32 reg; + + spin_lock_irqsave(&nw_gpio_lock, flags); + reg = nw_gpio_read(); + spin_unlock_irqrestore(&nw_gpio_lock, flags); + + return (reg & led->mask) ? LED_OFF : LED_FULL; +} + +static int __init netwinder_leds_init(void) +{ + int i; + + if (!machine_is_netwinder()) + return -ENODEV; + + for (i = 0; i < ARRAY_SIZE(netwinder_leds); i++) { + struct netwinder_led *led; + + led = kzalloc(sizeof(*led), GFP_KERNEL); + if (!led) + break; + + led->cdev.name = netwinder_leds[i].name; + led->cdev.brightness_set = netwinder_led_set; + led->cdev.brightness_get = netwinder_led_get; + led->cdev.default_trigger = netwinder_leds[i].trigger; + + if (i == 0) + led->mask = GPIO_GREEN_LED; + else + led->mask = GPIO_RED_LED; + + if (led_classdev_register(NULL, &led->cdev) < 0) { + kfree(led); + break; + } + } + + return 0; +} + +/* + * Since we may have triggers on any subsystem, defer registration + * until after subsystem_init. + */ +fs_initcall(netwinder_leds_init); +#endif + MACHINE_START(NETWINDER, "Rebel-NetWinder") /* Maintainer: Russell King/Rebel.com */ .atag_offset = 0x100, diff --git a/arch/arm/mach-footbridge/netwinder-leds.c b/arch/arm/mach-footbridge/netwinder-leds.c deleted file mode 100644 index 5a2bd89cbdca56837e6781051c515d99a717b907..0000000000000000000000000000000000000000 --- a/arch/arm/mach-footbridge/netwinder-leds.c +++ /dev/null @@ -1,138 +0,0 @@ -/* - * linux/arch/arm/mach-footbridge/netwinder-leds.c - * - * Copyright (C) 1998-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * NetWinder LED control routines. - * - * The Netwinder uses the leds as follows: - * - Green - toggles state every 50 timer interrupts - * - Red - On if the system is not idle - * - * Changelog: - * 02-05-1999 RMK Various cleanups - */ -#include -#include -#include -#include - -#include -#include -#include - -#define LED_STATE_ENABLED 1 -#define LED_STATE_CLAIMED 2 -static char led_state; -static char hw_led_state; - -static DEFINE_RAW_SPINLOCK(leds_lock); - -static void netwinder_leds_event(led_event_t evt) -{ - unsigned long flags; - - raw_spin_lock_irqsave(&leds_lock, flags); - - switch (evt) { - case led_start: - led_state |= LED_STATE_ENABLED; - hw_led_state = GPIO_GREEN_LED; - break; - - case led_stop: - led_state &= ~LED_STATE_ENABLED; - break; - - case led_claim: - led_state |= LED_STATE_CLAIMED; - hw_led_state = 0; - break; - - case led_release: - led_state &= ~LED_STATE_CLAIMED; - hw_led_state = 0; - break; - -#ifdef CONFIG_LEDS_TIMER - case led_timer: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state ^= GPIO_GREEN_LED; - break; -#endif - -#ifdef CONFIG_LEDS_CPU - case led_idle_start: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state &= ~GPIO_RED_LED; - break; - - case led_idle_end: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state |= GPIO_RED_LED; - break; -#endif - - case led_halted: - if (!(led_state & LED_STATE_CLAIMED)) - hw_led_state |= GPIO_RED_LED; - break; - - case led_green_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= GPIO_GREEN_LED; - break; - - case led_green_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~GPIO_GREEN_LED; - break; - - case led_amber_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= GPIO_GREEN_LED | GPIO_RED_LED; - break; - - case led_amber_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~(GPIO_GREEN_LED | GPIO_RED_LED); - break; - - case led_red_on: - if (led_state & LED_STATE_CLAIMED) - hw_led_state |= GPIO_RED_LED; - break; - - case led_red_off: - if (led_state & LED_STATE_CLAIMED) - hw_led_state &= ~GPIO_RED_LED; - break; - - default: - break; - } - - raw_spin_unlock_irqrestore(&leds_lock, flags); - - if (led_state & LED_STATE_ENABLED) { - raw_spin_lock_irqsave(&nw_gpio_lock, flags); - nw_gpio_modify_op(GPIO_RED_LED | GPIO_GREEN_LED, hw_led_state); - raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); - } -} - -static int __init leds_init(void) -{ - if (machine_is_netwinder()) - leds_event = netwinder_leds_event; - - leds_event(led_start); - - return 0; -} - -__initcall(leds_init); diff --git a/arch/arm/mach-gemini/irq.c b/arch/arm/mach-gemini/irq.c index ca70e5fcc7ac12cbd519d9d8a1b246253fe7f12a..020852d3bdd8bd002710e79aba3e036074fefd55 100644 --- a/arch/arm/mach-gemini/irq.c +++ b/arch/arm/mach-gemini/irq.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #define IRQ_SOURCE(base_addr) (base_addr + 0x00) diff --git a/arch/arm/mach-highbank/Kconfig b/arch/arm/mach-highbank/Kconfig new file mode 100644 index 0000000000000000000000000000000000000000..0e1d0a42a3eab7f44d454b91121944fe52f81dff --- /dev/null +++ b/arch/arm/mach-highbank/Kconfig @@ -0,0 +1,15 @@ +config ARCH_HIGHBANK + bool "Calxeda ECX-1000 (Highbank)" if ARCH_MULTI_V7 + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_GIC + select ARM_TIMER_SP804 + select CACHE_L2X0 + select CLKDEV_LOOKUP + select COMMON_CLK + select CPU_V7 + select GENERIC_CLOCKEVENTS + select HAVE_ARM_SCU + select HAVE_SMP + select SPARSE_IRQ + select USE_OF diff --git a/arch/arm/mach-highbank/Makefile.boot b/arch/arm/mach-highbank/Makefile.boot deleted file mode 100644 index dae9661a7689cbddb84e90e08d96c1d406eed32a..0000000000000000000000000000000000000000 --- a/arch/arm/mach-highbank/Makefile.boot +++ /dev/null @@ -1 +0,0 @@ -zreladdr-y := 0x00008000 diff --git a/arch/arm/mach-highbank/core.h b/arch/arm/mach-highbank/core.h index 141ed5171826acbc3caa6a1b7e843f2737361f65..286ec82a4f631ede71b725cf2f7a519e1824a05d 100644 --- a/arch/arm/mach-highbank/core.h +++ b/arch/arm/mach-highbank/core.h @@ -8,4 +8,13 @@ extern void highbank_lluart_map_io(void); static inline void highbank_lluart_map_io(void) {} #endif +#ifdef CONFIG_PM_SLEEP +extern void highbank_pm_init(void); +#else +static inline void highbank_pm_init(void) {} +#endif + extern void highbank_smc1(int fn, int arg); +extern void highbank_cpu_die(unsigned int cpu); + +extern struct smp_operations highbank_smp_ops; diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index d75b0a78d88ab94a85512cc3de2116ea3a710743..40e36a50304c9bdb8994fc0e9ac91b5c06a44578 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -15,6 +15,7 @@ */ #include #include +#include #include #include #include @@ -23,6 +24,7 @@ #include #include #include +#include #include #include @@ -149,9 +151,60 @@ static void highbank_power_off(void) cpu_do_idle(); } +static int highbank_platform_notifier(struct notifier_block *nb, + unsigned long event, void *__dev) +{ + struct resource *res; + int reg = -1; + struct device *dev = __dev; + + if (event != BUS_NOTIFY_ADD_DEVICE) + return NOTIFY_DONE; + + if (of_device_is_compatible(dev->of_node, "calxeda,hb-ahci")) + reg = 0xc; + else if (of_device_is_compatible(dev->of_node, "calxeda,hb-sdhci")) + reg = 0x18; + else if (of_device_is_compatible(dev->of_node, "arm,pl330")) + reg = 0x20; + else if (of_device_is_compatible(dev->of_node, "calxeda,hb-xgmac")) { + res = platform_get_resource(to_platform_device(dev), + IORESOURCE_MEM, 0); + if (res) { + if (res->start == 0xfff50000) + reg = 0; + else if (res->start == 0xfff51000) + reg = 4; + } + } + + if (reg < 0) + return NOTIFY_DONE; + + if (of_property_read_bool(dev->of_node, "dma-coherent")) { + writel(0xff31, sregs_base + reg); + set_dma_ops(dev, &arm_coherent_dma_ops); + } else + writel(0, sregs_base + reg); + + return NOTIFY_OK; +} + +static struct notifier_block highbank_amba_nb = { + .notifier_call = highbank_platform_notifier, +}; + +static struct notifier_block highbank_platform_nb = { + .notifier_call = highbank_platform_notifier, +}; + static void __init highbank_init(void) { pm_power_off = highbank_power_off; + highbank_pm_init(); + + bus_register_notifier(&platform_bus_type, &highbank_platform_nb); + bus_register_notifier(&amba_bustype, &highbank_amba_nb); of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } @@ -162,6 +215,7 @@ static const char *highbank_match[] __initconst = { }; DT_MACHINE_START(HIGHBANK, "Highbank") + .smp = smp_ops(highbank_smp_ops), .map_io = highbank_map_io, .init_irq = highbank_init_irq, .timer = &highbank_timer, diff --git a/arch/arm/mach-highbank/hotplug.c b/arch/arm/mach-highbank/hotplug.c index 977cebbea580e0b255f22a96415ae42598202cc1..2c1b8c3c8e4543d75f1e947fc28b78f8ed117ca3 100644 --- a/arch/arm/mach-highbank/hotplug.c +++ b/arch/arm/mach-highbank/hotplug.c @@ -24,16 +24,11 @@ extern void secondary_startup(void); -int platform_cpu_kill(unsigned int cpu) -{ - return 1; -} - /* * platform-specific code to shutdown a CPU * */ -void platform_cpu_die(unsigned int cpu) +void __ref highbank_cpu_die(unsigned int cpu) { flush_cache_all(); @@ -45,12 +40,3 @@ void platform_cpu_die(unsigned int cpu) /* We should never return from idle */ panic("highbank: cpu %d unexpectedly exit from shutdown\n", cpu); } - -int platform_cpu_disable(unsigned int cpu) -{ - /* - * CPU0 should not be shut down via hotplug. cpu_idle can WFI - * or a proper shutdown or hibernate should be used. - */ - return cpu == 0 ? -EPERM : 0; -} diff --git a/arch/arm/mach-highbank/include/mach/gpio.h b/arch/arm/mach-highbank/include/mach/gpio.h deleted file mode 100644 index 40a8c178f10d9e85a2873c83247c3f2fe553f408..0000000000000000000000000000000000000000 --- a/arch/arm/mach-highbank/include/mach/gpio.h +++ /dev/null @@ -1 +0,0 @@ -/* empty */ diff --git a/arch/arm/mach-highbank/include/mach/timex.h b/arch/arm/mach-highbank/include/mach/timex.h deleted file mode 100644 index 88dac7a55a979403a5f0982814079f23cba7cbce..0000000000000000000000000000000000000000 --- a/arch/arm/mach-highbank/include/mach/timex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __MACH_TIMEX_H -#define __MACH_TIMEX_H - -#define CLOCK_TICK_RATE 1000000 - -#endif diff --git a/arch/arm/mach-highbank/include/mach/uncompress.h b/arch/arm/mach-highbank/include/mach/uncompress.h deleted file mode 100644 index bbe20e6963251f03faf63df9c8132ab1160913b0..0000000000000000000000000000000000000000 --- a/arch/arm/mach-highbank/include/mach/uncompress.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __MACH_UNCOMPRESS_H -#define __MACH_UNCOMPRESS_H - -#define putc(c) -#define flush() -#define arch_decomp_setup() -#define arch_decomp_wdog() - -#endif diff --git a/arch/arm/mach-highbank/platsmp.c b/arch/arm/mach-highbank/platsmp.c index d01364c72b4545e1aad51a8dcc816e93f10f9e17..fa9560ec6e7018e0dbb0a7dcf0650bcaa7e785ad 100644 --- a/arch/arm/mach-highbank/platsmp.c +++ b/arch/arm/mach-highbank/platsmp.c @@ -25,12 +25,12 @@ extern void secondary_startup(void); -void __cpuinit platform_secondary_init(unsigned int cpu) +static void __cpuinit highbank_secondary_init(unsigned int cpu) { gic_secondary_init(0); } -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +static int __cpuinit highbank_boot_secondary(unsigned int cpu, struct task_struct *idle) { gic_raise_softirq(cpumask_of(cpu), 0); return 0; @@ -40,7 +40,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. */ -void __init smp_init_cpus(void) +static void __init highbank_smp_init_cpus(void) { unsigned int i, ncores; @@ -61,7 +61,7 @@ void __init smp_init_cpus(void) set_smp_cross_call(gic_raise_softirq); } -void __init platform_smp_prepare_cpus(unsigned int max_cpus) +static void __init highbank_smp_prepare_cpus(unsigned int max_cpus) { int i; @@ -76,3 +76,13 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus) for (i = 1; i < max_cpus; i++) highbank_set_cpu_jump(i, secondary_startup); } + +struct smp_operations highbank_smp_ops __initdata = { + .smp_init_cpus = highbank_smp_init_cpus, + .smp_prepare_cpus = highbank_smp_prepare_cpus, + .smp_secondary_init = highbank_secondary_init, + .smp_boot_secondary = highbank_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = highbank_cpu_die, +#endif +}; diff --git a/arch/arm/mach-highbank/pm.c b/arch/arm/mach-highbank/pm.c index 33b3beb899820c46a17859176a065ce70de5544a..de866f21331f4ed4c2258723ccbd9b24f1886eb7 100644 --- a/arch/arm/mach-highbank/pm.c +++ b/arch/arm/mach-highbank/pm.c @@ -47,9 +47,7 @@ static const struct platform_suspend_ops highbank_pm_ops = { .valid = suspend_valid_only_mem, }; -static int __init highbank_pm_init(void) +void __init highbank_pm_init(void) { suspend_set_ops(&highbank_pm_ops); - return 0; } -module_init(highbank_pm_init); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index afd542ad6f97d97cca788c4604a10e69d4625540..32197c117afe0b3c80656325ddafbdfdfc4f3e68 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -101,13 +101,8 @@ config SOC_IMX51 select SOC_IMX5 select ARCH_MX5 select ARCH_MX51 - -config SOC_IMX53 - bool - select SOC_IMX5 - select ARCH_MX5 - select ARCH_MX53 - select HAVE_CAN_FLEXCAN if CAN + select PINCTRL + select PINCTRL_IMX51 if ARCH_IMX_V4_V5 @@ -303,6 +298,7 @@ config MACH_MX27_3DS select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_I2C select IMX_HAVE_PLATFORM_IMX_KEYPAD + select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_UART select IMX_HAVE_PLATFORM_MX2_CAMERA select IMX_HAVE_PLATFORM_MXC_EHCI @@ -561,7 +557,6 @@ config MACH_BUG config MACH_IMX31_DT bool "Support i.MX31 platforms from device tree" select SOC_IMX31 - select USE_OF help Include support for Freescale i.MX31 based platforms using the device tree for discovery. @@ -737,95 +732,19 @@ config MACH_EUKREA_MBIMXSD51_BASEBOARD endchoice -config MX51_EFIKA_COMMON - bool - select SOC_IMX51 - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_PATA_IMX - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select MXC_ULPI if USB_ULPI +comment "Device tree only" -config MACH_MX51_EFIKAMX - bool "Support MX51 Genesi Efika MX nettop" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika MX nettop. This includes specific - configurations for the board and its peripherals. - -config MACH_MX51_EFIKASB - bool "Support MX51 Genesi Efika Smartbook" - select LEDS_GPIO_REGISTER - select MX51_EFIKA_COMMON - help - Include support for Genesi Efika Smartbook. This includes specific - configurations for the board and its peripherals. - -comment "i.MX53 machines:" - -config MACH_IMX53_DT - bool "Support i.MX53 platforms from device tree" - select SOC_IMX53 - select MACH_MX53_ARD - select MACH_MX53_EVK - select MACH_MX53_LOCO - select MACH_MX53_SMD - help - Include support for Freescale i.MX53 based platforms - using the device tree for discovery - -config MACH_MX53_EVK - bool "Support MX53 EVK platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_SPI_IMX - select LEDS_GPIO_REGISTER - help - Include support for MX53 EVK platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_SMD - bool "Support MX53 SMD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - help - Include support for MX53 SMD platform. This includes specific - configurations for the board and its peripherals. - -config MACH_MX53_LOCO - bool "Support MX53 LOCO platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS - select LEDS_GPIO_REGISTER - help - Include support for MX53 LOCO platform. This includes specific - configurations for the board and its peripherals. +config SOC_IMX53 + bool "i.MX53 support" + select SOC_IMX5 + select ARCH_MX5 + select ARCH_MX53 + select HAVE_CAN_FLEXCAN if CAN + select PINCTRL + select PINCTRL_IMX53 -config MACH_MX53_ARD - bool "Support MX53 ARD platforms" - select SOC_IMX53 - select IMX_HAVE_PLATFORM_IMX2_WDT - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select IMX_HAVE_PLATFORM_GPIO_KEYS help - Include support for MX53 ARD platform. This includes specific - configurations for the board and its peripherals. - -comment "i.MX6 family:" + This enables support for Freescale i.MX53 processor. config SOC_IMX6Q bool "i.MX6 Quad support" @@ -839,7 +758,7 @@ config SOC_IMX6Q select HAVE_IMX_MMDC select HAVE_IMX_SRC select HAVE_SMP - select MFD_ANATOP + select MFD_SYSCON select PINCTRL select PINCTRL_IMX6Q diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 07f7c226e4cfe6eec6181e5e506655223c2f1e1a..895754aeb4f33f856a12009989743d02a894176c 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -9,10 +9,11 @@ obj-$(CONFIG_SOC_IMX27) += clk-imx27.o mm-imx27.o ehci-imx27.o obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci-imx31.o pm-imx3.o obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o +imx5-pm-$(CONFIG_PM) += pm-imx5.o +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clk-imx51-imx53.o ehci-imx5.o $(imx5-pm-y) cpu_op-mx51.o obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ - clk-pfd.o clk-busy.o + clk-pfd.o clk-busy.o clk.o # Support for CMOS sensor interface obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o @@ -70,29 +71,21 @@ obj-$(CONFIG_DEBUG_LL) += lluart.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -obj-$(CONFIG_CPU_V7) += head-v7.o -AFLAGS_head-v7.o :=-Wa,-march=armv7-a -obj-$(CONFIG_SMP) += platsmp.o +AFLAGS_headsmp.o :=-Wa,-march=armv7-a +obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o obj-$(CONFIG_SOC_IMX6Q) += clk-imx6q.o mach-imx6q.o ifeq ($(CONFIG_PM),y) -obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o +obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o headsmp.o endif # i.MX5 based machines obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o -obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o -obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o -obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o -obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd51-baseboard.o -obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o -obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o -obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o -obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o +obj-$(CONFIG_SOC_IMX53) += mach-imx53.o diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot index 05541cf4a87873968064bab7ba90a2cb875bc7dc..b27815de8473326788c96d08e2e57de1a54ec608 100644 --- a/arch/arm/mach-imx/Makefile.boot +++ b/arch/arm/mach-imx/Makefile.boot @@ -37,10 +37,3 @@ initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000 zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000 params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100 initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000 - -dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb -dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \ - imx53-qsb.dtb imx53-smd.dtb -dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ - imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb \ diff --git a/arch/arm/mach-imx/clk-imx21.c b/arch/arm/mach-imx/clk-imx21.c index ea13e61bd5f36163d3b1372c16dbc0ae7c0d90a5..cf65148bc519a036b1dc8b7e4e5d6c9b57920c5a 100644 --- a/arch/arm/mach-imx/clk-imx21.c +++ b/arch/arm/mach-imx/clk-imx21.c @@ -23,7 +23,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index fdd8cc87c9feee388ca8a94b0fb46fa20305f33a..d20d4795f4eaebeb633c73ec441c36a661949a47 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -222,10 +222,8 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0"); clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1"); clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0"); @@ -243,6 +241,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma"); clk_register_clkdev(clk[iim_ipg], "iim", NULL); - mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); + mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1); return 0; } diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index f69ca4680049dd9f253e30eec5fc1690569f8d0d..3b6b640eed247ea1b7848c7a7fa01801f0190cde 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -239,8 +239,8 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "imx-ssi.0"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "imx-ssi.1"); clk_register_clkdev(clk[nfc_baud_gate], NULL, "mxc_nand.0"); - clk_register_clkdev(clk[vpu_baud_gate], "per", "imx-vpu"); - clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "imx-vpu"); + clk_register_clkdev(clk[vpu_baud_gate], "per", "coda-imx27.0"); + clk_register_clkdev(clk[vpu_ahb_gate], "ahb", "coda-imx27.0"); clk_register_clkdev(clk[dma_ahb_gate], "ahb", "imx-dma"); clk_register_clkdev(clk[dma_ipg_gate], "ipg", "imx-dma"); clk_register_clkdev(clk[fec_ipg_gate], "ipg", "imx27-fec.0"); diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index c6422fb10bae37756693f3323f79df62e4fc932e..177259b523cda0e8ba704c8b2a523e6bf95c2411 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -62,8 +62,8 @@ enum mx35_clks { kpp_gate, mlb_gate, mshc_gate, owire_gate, pwm_gate, rngc_gate, rtc_gate, rtic_gate, scc_gate, sdma_gate, spba_gate, spdif_gate, ssi1_gate, ssi2_gate, uart1_gate, uart2_gate, uart3_gate, usbotg_gate, - wdog_gate, max_gate, admux_gate, csi_gate, iim_gate, gpu2d_gate, - clk_max + wdog_gate, max_gate, admux_gate, csi_gate, csi_div, csi_sel, iim_gate, + gpu2d_gate, clk_max }; static struct clk *clk[clk_max]; @@ -142,6 +142,9 @@ int __init mx35_clocks_init() clk[nfc_div] = imx_clk_divider("nfc_div", "ahb", base + MX35_CCM_PDR4, 28, 4); + clk[csi_sel] = imx_clk_mux("csi_sel", base + MX35_CCM_PDR2, 7, 1, std_sel, ARRAY_SIZE(std_sel)); + clk[csi_div] = imx_clk_divider("csi_div", "csi_sel", base + MX35_CCM_PDR2, 16, 6); + clk[asrc_gate] = imx_clk_gate2("asrc_gate", "ipg", base + MX35_CCM_CGR0, 0); clk[pata_gate] = imx_clk_gate2("pata_gate", "ipg", base + MX35_CCM_CGR0, 2); clk[audmux_gate] = imx_clk_gate2("audmux_gate", "ipg", base + MX35_CCM_CGR0, 4); @@ -192,7 +195,7 @@ int __init mx35_clocks_init() clk[max_gate] = imx_clk_gate2("max_gate", "dummy", base + MX35_CCM_CGR2, 26); clk[admux_gate] = imx_clk_gate2("admux_gate", "ipg", base + MX35_CCM_CGR2, 30); - clk[csi_gate] = imx_clk_gate2("csi_gate", "ipg", base + MX35_CCM_CGR3, 0); + clk[csi_gate] = imx_clk_gate2("csi_gate", "csi_div", base + MX35_CCM_CGR3, 0); clk[iim_gate] = imx_clk_gate2("iim_gate", "ipg", base + MX35_CCM_CGR3, 2); clk[gpu2d_gate] = imx_clk_gate2("gpu2d_gate", "ahb", base + MX35_CCM_CGR3, 4); @@ -228,12 +231,11 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[i2c3_gate], NULL, "imx-i2c.2"); clk_register_clkdev(clk[ipu_gate], NULL, "ipu-core"); clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); + clk_register_clkdev(clk[kpp_gate], NULL, "imx-keypad"); clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1"); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); /* i.mx35 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); @@ -255,6 +257,7 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[usbotg_gate], "ahb", "fsl-usb2-udc"); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); clk_register_clkdev(clk[nfc_div], NULL, "mxc_nand.0"); + clk_register_clkdev(clk[csi_gate], NULL, "mx3-camera.0"); clk_prepare_enable(clk[spba_gate]); clk_prepare_enable(clk[gpio1_gate]); diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index e81f17a70f0092574410c731454c09f9bce84c84..a0bf84803eacee45978fc1b1deef41076db17f19 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -39,16 +39,17 @@ static const char *ssi_ext2_com_sels[] = { "ssi_ext2_podf", "ssi2_root_gate", }; static const char *emi_slow_sel[] = { "main_bus", "ahb", }; static const char *usb_phy_sel_str[] = { "osc", "usb_phy_podf", }; static const char *mx51_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "tve_di", }; -static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0", }; +static const char *mx53_ipu_di0_sel[] = { "di_pred", "osc", "ckih1", "di_pll4_podf", "dummy", "ldb_di0_gate", }; static const char *mx53_ldb_di0_sel[] = { "pll3_sw", "pll4_sw", }; static const char *mx51_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", }; -static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1", }; +static const char *mx53_ipu_di1_sel[] = { "di_pred", "osc", "ckih1", "tve_di", "ipp_di1", "ldb_di1_gate", }; static const char *mx53_ldb_di1_sel[] = { "pll3_sw", "pll4_sw", }; static const char *mx51_tve_ext_sel[] = { "osc", "ckih1", }; static const char *mx53_tve_ext_sel[] = { "pll4_sw", "ckih1", }; static const char *tve_sel[] = { "tve_pred", "tve_ext_sel", }; static const char *ipu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", }; static const char *vpu_sel[] = { "axi_a", "axi_b", "emi_slow_gate", "ahb", }; +static const char *mx53_can_sel[] = { "ipg", "ckih1", "ckih2", "lp_apm", }; enum imx5_clks { dummy, ckil, osc, ckih1, ckih2, ahb, ipg, axi_a, axi_b, uart_pred, @@ -82,6 +83,7 @@ enum imx5_clks { ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate, ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate, epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate, + can_sel, can1_serial_gate, can1_ipg_gate, clk_max }; @@ -422,8 +424,12 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk[esdhc4_per_gate] = imx_clk_gate2("esdhc4_per_gate", "esdhc_d_sel", MXC_CCM_CCGR3, 14); clk[usb_phy1_gate] = imx_clk_gate2("usb_phy1_gate", "usb_phy_sel", MXC_CCM_CCGR4, 10); clk[usb_phy2_gate] = imx_clk_gate2("usb_phy2_gate", "usb_phy_sel", MXC_CCM_CCGR4, 12); - clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "ipg", MXC_CCM_CCGR4, 6); - clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 8); + clk[can_sel] = imx_clk_mux("can_sel", MXC_CCM_CSCMR2, 6, 2, + mx53_can_sel, ARRAY_SIZE(mx53_can_sel)); + clk[can1_serial_gate] = imx_clk_gate2("can1_serial_gate", "can_sel", MXC_CCM_CCGR6, 22); + clk[can1_ipg_gate] = imx_clk_gate2("can1_ipg_gate", "ipg", MXC_CCM_CCGR6, 20); + clk[can2_serial_gate] = imx_clk_gate2("can2_serial_gate", "can_sel", MXC_CCM_CCGR4, 8); + clk[can2_ipg_gate] = imx_clk_gate2("can2_ipg_gate", "ipg", MXC_CCM_CCGR4, 6); clk[i2c3_gate] = imx_clk_gate2("i2c3_gate", "per_root", MXC_CCM_CCGR1, 22); for (i = 0; i < ARRAY_SIZE(clk); i++) @@ -457,6 +463,10 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi"); clk_register_clkdev(clk[nfc_gate], NULL, "63fdb000.nand"); + clk_register_clkdev(clk[can1_ipg_gate], "ipg", "53fc8000.can"); + clk_register_clkdev(clk[can1_serial_gate], "per", "53fc8000.can"); + clk_register_clkdev(clk[can2_ipg_gate], "ipg", "53fcc000.can"); + clk_register_clkdev(clk[can2_serial_gate], "per", "53fcc000.can"); /* set SDHC root clock to 200MHZ*/ clk_set_rate(clk[esdhc_a_podf], 200000000); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index ea89520b6e223fd3ab4db3227574c7299605e265..3ec242f3341ee7d6f64be258a75faadc16da6d29 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -152,11 +152,12 @@ enum mx6q_clks { ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, ldb_di0_div_3_5, ldb_di1_div_3_5, clk_max }; static struct clk *clk[clk_max]; +static struct clk_onecell_data clk_data; static enum mx6q_clks const clks_init_on[] __initconst = { mmdc_ch0_axi, rom, @@ -288,8 +289,10 @@ int __init mx6q_clocks_init(void) clk[gpu3d_shader] = imx_clk_divider("gpu3d_shader", "gpu3d_shader_sel", base + 0x18, 29, 3); clk[ipu1_podf] = imx_clk_divider("ipu1_podf", "ipu1_sel", base + 0x3c, 11, 3); clk[ipu2_podf] = imx_clk_divider("ipu2_podf", "ipu2_sel", base + 0x3c, 16, 3); - clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_sel", base + 0x20, 10, 1); - clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_sel", base + 0x20, 11, 1); + clk[ldb_di0_div_3_5] = imx_clk_fixed_factor("ldb_di0_div_3_5", "ldb_di0_sel", 2, 7); + clk[ldb_di0_podf] = imx_clk_divider("ldb_di0_podf", "ldb_di0_div_3_5", base + 0x20, 10, 1); + clk[ldb_di1_div_3_5] = imx_clk_fixed_factor("ldb_di1_div_3_5", "ldb_di1_sel", 2, 7); + clk[ldb_di1_podf] = imx_clk_divider("ldb_di1_podf", "ldb_di1_div_3_5", base + 0x20, 11, 1); clk[ipu1_di0_pre] = imx_clk_divider("ipu1_di0_pre", "ipu1_di0_pre_sel", base + 0x34, 3, 3); clk[ipu1_di1_pre] = imx_clk_divider("ipu1_di1_pre", "ipu1_di1_pre_sel", base + 0x34, 12, 3); clk[ipu2_di0_pre] = imx_clk_divider("ipu2_di0_pre", "ipu2_di0_pre_sel", base + 0x38, 3, 3); @@ -392,52 +395,24 @@ int __init mx6q_clocks_init(void) pr_err("i.MX6q clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); + clk_data.clks = clk; + clk_data.clk_num = ARRAY_SIZE(clk); + of_clk_add_provider(np, of_clk_src_onecell_get, &clk_data); + clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); clk_register_clkdev(clk[twd], NULL, "smp_twd"); - clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh"); - clk_register_clkdev(clk[per1_bch], "per1_bch", "112000.gpmi-nand"); - clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", "112000.gpmi-nand"); - clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", "112000.gpmi-nand"); - clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", "112000.gpmi-nand"); - clk_register_clkdev(clk[gpmi_io], "gpmi_io", "112000.gpmi-nand"); - clk_register_clkdev(clk[usboh3], NULL, "2184000.usb"); - clk_register_clkdev(clk[usboh3], NULL, "2184200.usb"); - clk_register_clkdev(clk[usboh3], NULL, "2184400.usb"); - clk_register_clkdev(clk[usboh3], NULL, "2184600.usb"); - clk_register_clkdev(clk[usbphy1], NULL, "20c9000.usbphy"); - clk_register_clkdev(clk[usbphy2], NULL, "20ca000.usbphy"); - clk_register_clkdev(clk[uart_serial], "per", "2020000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial"); - clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21e8000.serial"); - clk_register_clkdev(clk[uart_serial], "per", "21ec000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21ec000.serial"); - clk_register_clkdev(clk[uart_serial], "per", "21f0000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21f0000.serial"); - clk_register_clkdev(clk[uart_serial], "per", "21f4000.serial"); - clk_register_clkdev(clk[uart_ipg], "ipg", "21f4000.serial"); - clk_register_clkdev(clk[enet], NULL, "2188000.ethernet"); - clk_register_clkdev(clk[usdhc1], NULL, "2190000.usdhc"); - clk_register_clkdev(clk[usdhc2], NULL, "2194000.usdhc"); - clk_register_clkdev(clk[usdhc3], NULL, "2198000.usdhc"); - clk_register_clkdev(clk[usdhc4], NULL, "219c000.usdhc"); - clk_register_clkdev(clk[i2c1], NULL, "21a0000.i2c"); - clk_register_clkdev(clk[i2c2], NULL, "21a4000.i2c"); - clk_register_clkdev(clk[i2c3], NULL, "21a8000.i2c"); - clk_register_clkdev(clk[ecspi1], NULL, "2008000.ecspi"); - clk_register_clkdev(clk[ecspi2], NULL, "200c000.ecspi"); - clk_register_clkdev(clk[ecspi3], NULL, "2010000.ecspi"); - clk_register_clkdev(clk[ecspi4], NULL, "2014000.ecspi"); - clk_register_clkdev(clk[ecspi5], NULL, "2018000.ecspi"); - clk_register_clkdev(clk[sdma], NULL, "20ec000.sdma"); - clk_register_clkdev(clk[dummy], NULL, "20bc000.wdog"); - clk_register_clkdev(clk[dummy], NULL, "20c0000.wdog"); - clk_register_clkdev(clk[ssi1_ipg], NULL, "2028000.ssi"); clk_register_clkdev(clk[cko1_sel], "cko1_sel", NULL); clk_register_clkdev(clk[ahb], "ahb", NULL); clk_register_clkdev(clk[cko1], "cko1", NULL); + /* + * The gpmi needs 100MHz frequency in the EDO/Sync mode, + * We can not get the 100MHz from the pll2_pfd0_352m. + * So choose pll2_pfd2_396m as enfc_sel's parent. + */ + clk_set_parent(clk[enfc_sel], clk[pll2_pfd2_396m]); + for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clk[clks_init_on[i]]); diff --git a/arch/arm/mach-imx/clk-pllv1.c b/arch/arm/mach-imx/clk-pllv1.c index 2d856f9ccf59086cf73ffdf22a1a290fc1f33a37..02be73178912f14e53af58b26c700413c8402ba8 100644 --- a/arch/arm/mach-imx/clk-pllv1.c +++ b/arch/arm/mach-imx/clk-pllv1.c @@ -6,7 +6,7 @@ #include #include #include -#include + #include "clk.h" /** @@ -29,8 +29,53 @@ static unsigned long clk_pllv1_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) { struct clk_pllv1 *pll = to_clk_pllv1(hw); + long long ll; + int mfn_abs; + unsigned int mfi, mfn, mfd, pd; + u32 reg; + unsigned long rate; + + reg = readl(pll->base); + + /* + * Get the resulting clock rate from a PLL register value and the input + * frequency. PLLs with this register layout can be found on i.MX1, + * i.MX21, i.MX27 and i,MX31 + * + * mfi + mfn / (mfd + 1) + * f = 2 * f_ref * -------------------- + * pd + 1 + */ + + mfi = (reg >> 10) & 0xf; + mfn = reg & 0x3ff; + mfd = (reg >> 16) & 0x3ff; + pd = (reg >> 26) & 0xf; + + mfi = mfi <= 5 ? 5 : mfi; + + mfn_abs = mfn; + + /* + * On all i.MXs except i.MX1 and i.MX21 mfn is a 10bit + * 2's complements number + */ + if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200) + mfn_abs = 0x400 - mfn; + + rate = parent_rate * 2; + rate /= pd + 1; + + ll = (unsigned long long)rate * mfn_abs; + + do_div(ll, mfd + 1); + + if (!cpu_is_mx1() && !cpu_is_mx21() && mfn >= 0x200) + ll = -ll; + + ll = (rate * mfi) + ll; - return mxc_decode_pll(readl(pll->base), parent_rate); + return ll; } struct clk_ops clk_pllv1_ops = { diff --git a/arch/arm/mach-imx/clk.c b/arch/arm/mach-imx/clk.c new file mode 100644 index 0000000000000000000000000000000000000000..f5e8be8e7f117eef958d2ff9ffb64af469712cda --- /dev/null +++ b/arch/arm/mach-imx/clk.c @@ -0,0 +1,3 @@ +#include + +DEFINE_SPINLOCK(imx_ccm_lock); diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 1bf64fe2523c5b58b264d7f6cead63568cf2d8af..5f2d8acca25f9e57430b39a7c9ef122d4e7043d6 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -3,7 +3,8 @@ #include #include -#include + +extern spinlock_t imx_ccm_lock; struct clk *imx_clk_pllv1(const char *name, const char *parent, void __iomem *base); diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 436c5720fe6a40255a2c3bc5ab05378c23855e02..04822932cdd1d13c260b4e950ccb51dec9f4ff39 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -17,6 +17,10 @@ extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data; #define imx27_add_fsl_usb2_udc(pdata) \ imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata) +extern const struct imx_imx27_coda_data imx27_coda_data; +#define imx27_add_coda() \ + imx_add_imx27_coda(&imx27_coda_data) + extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data; #define imx27_add_imx2_wdt() \ imx_add_imx2_wdt(&imx27_imx2_wdt_data) diff --git a/arch/arm/mach-imx/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h deleted file mode 100644 index 77e0db96c4483c4592099fb7639678a180f84190..0000000000000000000000000000000000000000 --- a/arch/arm/mach-imx/devices-imx53.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - * Copyright (C) 2010 Yong Shen. - * - * This program is free software; you can redistribute it and/or modify it under - * the terms of the GNU General Public License version 2 as published by the - * Free Software Foundation. - */ -#include -#include - -extern const struct imx_fec_data imx53_fec_data; -#define imx53_add_fec(pdata) \ - imx_add_fec(&imx53_fec_data, pdata) - -extern const struct imx_imx_uart_1irq_data imx53_imx_uart_data[]; -#define imx53_add_imx_uart(id, pdata) \ - imx_add_imx_uart_1irq(&imx53_imx_uart_data[id], pdata) - - -extern const struct imx_imx_i2c_data imx53_imx_i2c_data[]; -#define imx53_add_imx_i2c(id, pdata) \ - imx_add_imx_i2c(&imx53_imx_i2c_data[id], pdata) - -extern const struct imx_sdhci_esdhc_imx_data imx53_sdhci_esdhc_imx_data[]; -#define imx53_add_sdhci_esdhc_imx(id, pdata) \ - imx_add_sdhci_esdhc_imx(&imx53_sdhci_esdhc_imx_data[id], pdata) - -extern const struct imx_spi_imx_data imx53_ecspi_data[]; -#define imx53_add_ecspi(id, pdata) \ - imx_add_spi_imx(&imx53_ecspi_data[id], pdata) - -extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[]; -#define imx53_add_imx2_wdt(id) \ - imx_add_imx2_wdt(&imx53_imx2_wdt_data[id]) - -extern const struct imx_imx_ssi_data imx53_imx_ssi_data[]; -#define imx53_add_imx_ssi(id, pdata) \ - imx_add_imx_ssi(&imx53_imx_ssi_data[id], pdata) - -extern const struct imx_imx_keypad_data imx53_imx_keypad_data; -#define imx53_add_imx_keypad(pdata) \ - imx_add_imx_keypad(&imx53_imx_keypad_data, pdata) - -extern const struct imx_pata_imx_data imx53_pata_imx_data; -#define imx53_add_pata_imx() \ - imx_add_pata_imx(&imx53_pata_imx_data) - -extern struct platform_device *__init imx53_add_ahci_imx(void); diff --git a/arch/arm/mach-imx/efika.h b/arch/arm/mach-imx/efika.h deleted file mode 100644 index 014aa985faaeb128f960dc48a0d84ef298813d89..0000000000000000000000000000000000000000 --- a/arch/arm/mach-imx/efika.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _EFIKA_H -#define _EFIKA_H - -#define EFIKA_WLAN_EN IMX_GPIO_NR(2, 16) -#define EFIKA_WLAN_RESET IMX_GPIO_NR(2, 10) -#define EFIKA_USB_PHY_RESET IMX_GPIO_NR(2, 9) - -void __init efika_board_common_init(void); - -#endif diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c index 05bb41d99728b3911ea6cfb8203a08cece9bdba7..412c583a24b01a7e35fc976572cdafc50e08e13e 100644 --- a/arch/arm/mach-imx/ehci-imx25.c +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -17,7 +17,7 @@ #include #include -#include +#include #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx27.c b/arch/arm/mach-imx/ehci-imx27.c index fa69419eabdd2c4c5dc5c0bc5d7e902f091f6be8..cd6e1f81508d2351152094f9c7d24a95fce4a848 100644 --- a/arch/arm/mach-imx/ehci-imx27.c +++ b/arch/arm/mach-imx/ehci-imx27.c @@ -17,7 +17,7 @@ #include #include -#include +#include #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx31.c b/arch/arm/mach-imx/ehci-imx31.c index faad0f15ac7f0684787dc1e8247cba06d87ec770..9a880c78af34081bdca578f8da106d86770054bf 100644 --- a/arch/arm/mach-imx/ehci-imx31.c +++ b/arch/arm/mach-imx/ehci-imx31.c @@ -17,7 +17,7 @@ #include #include -#include +#include #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index 73574c30cf50ca97c337eaa4ec9bd58d7a2c9dab..779e16eb65cb49aeaa58af79b19aac4e08b9bb47 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -17,7 +17,7 @@ #include #include -#include +#include #define USBCTRL_OTGBASE_OFFSET 0x600 diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c index a6a4afb0ad62d8a6738d70cc81137b5a2f014571..cf8d00e5cce13a778af20eded054b75aa9427c09 100644 --- a/arch/arm/mach-imx/ehci-imx5.c +++ b/arch/arm/mach-imx/ehci-imx5.c @@ -17,7 +17,7 @@ #include #include -#include +#include #define MXC_OTG_OFFSET 0 #define MXC_H1_OFFSET 0x200 diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index fd3177f9e79ad2be616fb4d70b1f71f48daf9fdf..98aef571b9f839de8111cb8cb19e3dfe595b5adb 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -348,4 +348,5 @@ void __init eukrea_mbimx27_baseboard_init(void) imx27_add_imx_keypad(&eukrea_mbimx27_keymap_data); gpio_led_register_device(-1, &eukrea_mbimx27_gpio_led_info); + imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c index dfd2da87c2df1e3214a6fac5bfca0ec18dee3193..0b84666792f05f7192954b3a57b2256d7e341031 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd25-baseboard.c @@ -306,4 +306,5 @@ void __init eukrea_mbimxsd25_baseboard_init(void) platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); imx_add_gpio_keys(&eukrea_mbimxsd_button_data); + imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 6e9dd12a6961cf8bf7e6fc8cf8053a12ca13fd32..c6532a007d468ae68658c213d3656ee483cc2dfd 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -315,4 +315,5 @@ void __init eukrea_mbimxsd35_baseboard_init(void) platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); gpio_led_register_device(-1, &eukrea_mbimxsd_led_info); imx_add_gpio_keys(&eukrea_mbimxsd_button_data); + imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); } diff --git a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c index 96a24b73dc2309fc109c346524d22e39b84e3b67..8b0de30d7a3f3d2dba60032367b4b548657804b4 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd51-baseboard.c @@ -228,4 +228,5 @@ void __init eukrea_mbimxsd51_baseboard_init(void) gpio_led_register_device(-1, &eukrea_mbimxsd51_led_info); imx_add_gpio_keys(&eukrea_mbimxsd51_button_data); + imx_add_platform_device("eukrea_tlv320", 0, NULL, 0, NULL, 0); } diff --git a/arch/arm/mach-imx/head-v7.S b/arch/arm/mach-imx/headsmp.S similarity index 100% rename from arch/arm/mach-imx/head-v7.S rename to arch/arm/mach-imx/headsmp.S diff --git a/arch/arm/mach-imx/hotplug.c b/arch/arm/mach-imx/hotplug.c index 20ed2d56c1af6a3109ff3ea10843cda25d2a289e..b07b778dc9a80c7e06a8b462d8b110f744623020 100644 --- a/arch/arm/mach-imx/hotplug.c +++ b/arch/arm/mach-imx/hotplug.c @@ -15,11 +15,6 @@ #include #include -int platform_cpu_kill(unsigned int cpu) -{ - return 1; -} - static inline void cpu_enter_lowpower(void) { unsigned int v; @@ -42,43 +37,17 @@ static inline void cpu_enter_lowpower(void) : "cc"); } -static inline void cpu_leave_lowpower(void) -{ - unsigned int v; - - asm volatile( - "mrc p15, 0, %0, c1, c0, 0\n" - " orr %0, %0, %1\n" - " mcr p15, 0, %0, c1, c0, 0\n" - " mrc p15, 0, %0, c1, c0, 1\n" - " orr %0, %0, %2\n" - " mcr p15, 0, %0, c1, c0, 1\n" - : "=&r" (v) - : "Ir" (CR_C), "Ir" (0x40) - : "cc"); -} - /* * platform-specific code to shutdown a CPU * * Called with IRQs disabled */ -void platform_cpu_die(unsigned int cpu) +void imx_cpu_die(unsigned int cpu) { cpu_enter_lowpower(); imx_enable_cpu(cpu, false); - cpu_do_idle(); - cpu_leave_lowpower(); - /* We should never return from idle */ - panic("cpu %d unexpectedly exit from shutdown\n", cpu); -} - -int platform_cpu_disable(unsigned int cpu) -{ - /* - * we don't allow CPU 0 to be shutdown (it is still too special - * e.g. clock tick interrupts) - */ - return cpu == 0 ? -EPERM : 0; + /* spin here until hardware takes it down */ + while (1) + ; } diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index d4067fe363575955739c22d2f59ef142d97f6669..f233b4bb2342ded80353a25a8ad253b60fd7620d 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -13,7 +13,6 @@ #include #include #include -#include #include #include #include @@ -44,27 +43,8 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static const struct of_device_id imx51_iomuxc_of_match[] __initconst = { - { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, }, - { /* sentinel */ } -}; - static void __init imx51_dt_init(void) { - struct device_node *node; - const struct of_device_id *of_id; - void (*func)(void); - - pinctrl_provide_dummies(); - - node = of_find_matching_node(NULL, imx51_iomuxc_of_match); - if (node) { - of_id = of_match_node(imx51_iomuxc_of_match, node); - func = of_id->data; - func(); - of_node_put(node); - } - of_platform_populate(NULL, of_default_bus_match_table, imx51_auxdata_lookup, NULL); } @@ -79,7 +59,6 @@ static struct sys_timer imx51_timer = { }; static const char *imx51_dt_board_compat[] __initdata = { - "fsl,imx51-babbage", "fsl,imx51", NULL }; diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 2c6ab3273f9e4d4a419e54a4f7cde417fdb213a6..5985ed1b8c9875cffc99ab74233147912ae01eca 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -526,7 +526,8 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_nand(&armadillo5x0_nand_board_info); /* set NAND page size to 2k if not configured via boot mode pins */ - __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); + __raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) | + (1 << 30), mx3_ccm_base + MXC_CCM_RCSR); /* RTC */ /* Get RTC IRQ and register the chip */ diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index f264ddddd47c395404203cdebf43b7dc2206abb0..141756f00ae5c8733795855bd31b994c8609a496 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -32,13 +32,14 @@ #include #include #include -#include +#include #include #include #include #include #include #include +#include #include #include #include @@ -58,6 +59,11 @@ #define EXPBOARD_BIT1 (GPIO_PORTD + 27) #define EXPBOARD_BIT0 (GPIO_PORTD + 28) +#define AMP_GAIN_0 (GPIO_PORTF + 9) +#define AMP_GAIN_1 (GPIO_PORTF + 8) +#define AMP_MUTE_SDL (GPIO_PORTE + 5) +#define AMP_MUTE_SDR (GPIO_PORTF + 7) + static const int visstrim_m10_pins[] __initconst = { /* UART1 (console) */ PE12_PF_UART1_TXD, @@ -139,6 +145,11 @@ static const int visstrim_m10_pins[] __initconst = { EXPBOARD_BIT2 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, EXPBOARD_BIT1 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, EXPBOARD_BIT0 | GPIO_GPIO | GPIO_IN | GPIO_PUEN, + /* Audio AMP control */ + AMP_GAIN_0 | GPIO_GPIO | GPIO_OUT, + AMP_GAIN_1 | GPIO_GPIO | GPIO_OUT, + AMP_MUTE_SDL | GPIO_GPIO | GPIO_OUT, + AMP_MUTE_SDR | GPIO_GPIO | GPIO_OUT, }; static struct gpio visstrim_m10_version_gpios[] = { @@ -166,6 +177,26 @@ static const struct gpio visstrim_m10_gpios[] __initconst = { .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW, .label = "usbotg_cs", }, + { + .gpio = AMP_GAIN_0, + .flags = GPIOF_DIR_OUT, + .label = "amp-gain-0", + }, + { + .gpio = AMP_GAIN_1, + .flags = GPIOF_DIR_OUT, + .label = "amp-gain-1", + }, + { + .gpio = AMP_MUTE_SDL, + .flags = GPIOF_DIR_OUT, + .label = "amp-mute-sdl", + }, + { + .gpio = AMP_MUTE_SDR, + .flags = GPIOF_DIR_OUT, + .label = "amp-mute-sdr", + }, }; /* Camera */ @@ -233,10 +264,8 @@ static void __init visstrim_camera_init(void) static void __init visstrim_reserve(void) { /* reserve 4 MiB for mx2-camera */ - mx2_camera_base = memblock_alloc(MX2_CAMERA_BUF_SIZE, + mx2_camera_base = arm_memblock_steal(3 * MX2_CAMERA_BUF_SIZE, MX2_CAMERA_BUF_SIZE); - memblock_free(mx2_camera_base, MX2_CAMERA_BUF_SIZE); - memblock_remove(mx2_camera_base, MX2_CAMERA_BUF_SIZE); } /* GPIOs used as events for applications */ @@ -405,6 +434,55 @@ static const struct imx_ssi_platform_data visstrim_m10_ssi_pdata __initconst = { .flags = IMX_SSI_DMA | IMX_SSI_SYN, }; +/* coda */ + +static void __init visstrim_coda_init(void) +{ + struct platform_device *pdev; + int dma; + + pdev = imx27_add_coda(); + dma = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base + MX2_CAMERA_BUF_SIZE, + mx2_camera_base + MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) + return; +} + +/* DMA deinterlace */ +static struct platform_device visstrim_deinterlace = { + .name = "m2m-deinterlace", + .id = 0, +}; + +static void __init visstrim_deinterlace_init(void) +{ + int ret = -ENOMEM; + struct platform_device *pdev = &visstrim_deinterlace; + int dma; + + ret = platform_device_register(pdev); + + dma = dma_declare_coherent_memory(&pdev->dev, + mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE, + mx2_camera_base + 2 * MX2_CAMERA_BUF_SIZE, + MX2_CAMERA_BUF_SIZE, + DMA_MEMORY_MAP | DMA_MEMORY_EXCLUSIVE); + if (!(dma & DMA_MEMORY_MAP)) + return; +} + + +/* Audio */ +static const struct snd_mx27vis_platform_data snd_mx27vis_pdata __initconst = { + .amp_gain0_gpio = AMP_GAIN_0, + .amp_gain1_gpio = AMP_GAIN_1, + .amp_mutel_gpio = AMP_MUTE_SDL, + .amp_muter_gpio = AMP_MUTE_SDR, +}; + static void __init visstrim_m10_revision(void) { int exp_version = 0; @@ -463,11 +541,14 @@ static void __init visstrim_m10_board_init(void) imx27_add_fec(NULL); imx_add_gpio_keys(&visstrim_gpio_keys_platform_data); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx_add_platform_device("mx27vis", 0, NULL, 0, NULL, 0); + imx_add_platform_device("mx27vis", 0, NULL, 0, &snd_mx27vis_pdata, + sizeof(snd_mx27vis_pdata)); platform_device_register_resndata(NULL, "soc-camera-pdrv", 0, NULL, 0, &iclink_tvp5150, sizeof(iclink_tvp5150)); gpio_led_register_device(0, &visstrim_m10_led_data); + visstrim_deinterlace_init(); visstrim_camera_init(); + visstrim_coda_init(); } static void __init visstrim_m10_timer_init(void) diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/mach-imx53.c similarity index 81% rename from arch/arm/mach-imx/imx53-dt.c rename to arch/arm/mach-imx/mach-imx53.c index 1b7a2fc36591e1806af4345be6f00fbec9bd70a8..29711e95579f7cb5a28bf9e29f359b14f78a7133 100644 --- a/arch/arm/mach-imx/imx53-dt.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -51,14 +50,6 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static const struct of_device_id imx53_iomuxc_of_match[] __initconst = { - { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, }, - { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, }, - { .compatible = "fsl,imx53-iomuxc-qsb", .data = imx53_qsb_common_init, }, - { .compatible = "fsl,imx53-iomuxc-smd", .data = imx53_smd_common_init, }, - { /* sentinel */ } -}; - static void __init imx53_qsb_init(void) { struct clk *clk; @@ -74,20 +65,6 @@ static void __init imx53_qsb_init(void) static void __init imx53_dt_init(void) { - struct device_node *node; - const struct of_device_id *of_id; - void (*func)(void); - - pinctrl_provide_dummies(); - - node = of_find_matching_node(NULL, imx53_iomuxc_of_match); - if (node) { - of_id = of_match_node(imx53_iomuxc_of_match, node); - func = of_id->data; - func(); - of_node_put(node); - } - if (of_machine_is_compatible("fsl,imx53-qsb")) imx53_qsb_init(); @@ -105,10 +82,6 @@ static struct sys_timer imx53_timer = { }; static const char *imx53_dt_board_compat[] __initdata = { - "fsl,imx53-ard", - "fsl,imx53-evk", - "fsl,imx53-qsb", - "fsl,imx53-smd", "fsl,imx53", NULL }; diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index 5ec0608f2a764a9be584ea1bebbe1339f981a259..47c91f7185d2fb7cdef048388e5cf82620e68a87 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -22,10 +22,10 @@ #include #include #include -#include #include +#include #include -#include +#include #include #include #include @@ -71,7 +71,7 @@ soft: /* For imx6q sabrelite board: set KSZ9021RN RGMII pad skew */ static int ksz9021rn_phy_fixup(struct phy_device *phydev) { - if (IS_ENABLED(CONFIG_PHYLIB)) { + if (IS_BUILTIN(CONFIG_PHYLIB)) { /* min rx data delay */ phy_write(phydev, 0x0b, 0x8105); phy_write(phydev, 0x0c, 0x0000); @@ -100,7 +100,6 @@ static void __init imx6q_sabrelite_cko1_setup(void) clk_set_parent(cko1_sel, ahb); rate = clk_round_rate(cko1, 16000000); clk_set_rate(cko1, rate); - clk_register_clkdev(cko1, NULL, "0-000a"); put_clk: if (!IS_ERR(cko1_sel)) clk_put(cko1_sel); @@ -112,7 +111,7 @@ put_clk: static void __init imx6q_sabrelite_init(void) { - if (IS_ENABLED(CONFIG_PHYLIB)) + if (IS_BUILTIN(CONFIG_PHYLIB)) phy_register_fixup_for_uid(PHY_ID_KSZ9021, MICREL_PHY_ID_MASK, ksz9021rn_phy_fixup); imx6q_sabrelite_cko1_setup(); @@ -120,20 +119,7 @@ static void __init imx6q_sabrelite_init(void) static void __init imx6q_usb_init(void) { - struct device_node *np; - struct platform_device *pdev = NULL; - struct anatop *adata = NULL; - - np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); - if (np) - pdev = of_find_device_by_node(np); - if (pdev) - adata = platform_get_drvdata(pdev); - if (!adata) { - if (np) - of_node_put(np); - return; - } + struct regmap *anatop; #define HW_ANADIG_USB1_CHRG_DETECT 0x000001b0 #define HW_ANADIG_USB2_CHRG_DETECT 0x00000210 @@ -141,30 +127,25 @@ static void __init imx6q_usb_init(void) #define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x00100000 #define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x00080000 - /* - * The external charger detector needs to be disabled, - * or the signal at DP will be poor - */ - anatop_write_reg(adata, HW_ANADIG_USB1_CHRG_DETECT, - BM_ANADIG_USB_CHRG_DETECT_EN_B - | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B, - ~0); - anatop_write_reg(adata, HW_ANADIG_USB2_CHRG_DETECT, - BM_ANADIG_USB_CHRG_DETECT_EN_B | - BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B, - ~0); - - of_node_put(np); + anatop = syscon_regmap_lookup_by_compatible("fsl,imx6q-anatop"); + if (!IS_ERR(anatop)) { + /* + * The external charger detector needs to be disabled, + * or the signal at DP will be poor + */ + regmap_write(anatop, HW_ANADIG_USB1_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B + | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); + regmap_write(anatop, HW_ANADIG_USB2_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B | + BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B); + } else { + pr_warn("failed to find fsl,imx6q-anatop regmap\n"); + } } static void __init imx6q_init_machine(void) { - /* - * This should be removed when all imx6q boards have pinctrl - * states for devices defined in device tree. - */ - pinctrl_provide_dummies(); - if (of_machine_is_compatible("fsl,imx6q-sabrelite")) imx6q_sabrelite_init(); @@ -218,14 +199,12 @@ static struct sys_timer imx6q_timer = { }; static const char *imx6q_dt_compat[] __initdata = { - "fsl,imx6q-arm2", - "fsl,imx6q-sabrelite", - "fsl,imx6q-sabresd", "fsl,imx6q", NULL, }; DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)") + .smp = smp_ops(imx_smp_ops), .map_io = imx6q_map_io, .init_irq = imx6q_init_irq, .handle_irq = imx6q_handle_irq, diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 5d08533ab2c77d50109c670dc071063c9c0da34c..0330078ff7880a34c94e275c19d128b989762355 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -36,7 +36,6 @@ #include #include -#include #include #include #include @@ -259,13 +258,13 @@ static void __init kzm_board_init(void) */ static struct map_desc kzm_io_desc[] __initdata = { { - .virtual = MX31_CS4_BASE_ADDR_VIRT, + .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), .length = MX31_CS4_SIZE, .type = MT_DEVICE }, { - .virtual = MX31_CS5_BASE_ADDR_VIRT, + .virtual = (unsigned long)MX31_CS5_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS5_BASE_ADDR), .length = MX31_CS5_SIZE, .type = MT_DEVICE diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index 58c24c1a7ab70ac26e47db241e882800a2cf9cc5..05996f39005c2dfcd2a6eb1df57b4fc92b2abc03 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -158,6 +158,11 @@ static const int mx27pdk_pins[] __initconst = { PB21_PF_CSI_HSYNC, CSI_PWRDWN | GPIO_GPIO | GPIO_OUT, CSI_RESET | GPIO_GPIO | GPIO_OUT, + /* SSI4 */ + PC16_PF_SSI4_FS, + PC17_PF_SSI4_RXD, + PC18_PF_SSI4_TXD, + PC19_PF_SSI4_CLK, }; static struct gpio mx27_3ds_camera_gpios[] = { @@ -329,13 +334,24 @@ static struct mc13xxx_regulator_init_data mx27_3ds_regulators[] = { }; /* MC13783 */ +static struct mc13xxx_codec_platform_data mx27_3ds_codec = { + .dac_ssi_port = MC13783_SSI1_PORT, + .adc_ssi_port = MC13783_SSI1_PORT, +}; + static struct mc13xxx_platform_data mc13783_pdata = { .regulators = { .regulators = mx27_3ds_regulators, .num_regulators = ARRAY_SIZE(mx27_3ds_regulators), }, - .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC, + .flags = MC13XXX_USE_TOUCHSCREEN | MC13XXX_USE_RTC | + MC13XXX_USE_CODEC, + .codec = &mx27_3ds_codec, +}; + +static struct imx_ssi_platform_data mx27_3ds_ssi_pdata = { + .flags = IMX_SSI_DMA | IMX_SSI_NET, }; /* SPI */ @@ -512,6 +528,9 @@ static void __init mx27pdk_init(void) } imx27_add_mx2_camera(&mx27_3ds_cam_pdata); + imx27_add_imx_ssi(0, &mx27_3ds_ssi_pdata); + + imx_add_platform_device("imx_mc13783", 0, NULL, 0, NULL, 0); } static void __init mx27pdk_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index d37f4809c5565abacb594f7693991ce726412092..e774b07f48d33c70c0a678f3547fc8d1962d15bf 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -540,7 +540,7 @@ static void __init mxc_init_audio(void) */ static struct map_desc mx31ads_io_desc[] __initdata = { { - .virtual = MX31_CS4_BASE_ADDR_VIRT, + .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), .length = CS4_CS8900_MMIO_START, .type = MT_DEVICE diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index c8785b39eaed20432166db3a0d24b49a4f416bc0..ef57cff5abfbf8bd72607e23395963bbe5d4d895 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -207,7 +207,7 @@ static struct platform_device physmap_flash_device = { */ static struct map_desc mx31lite_io_desc[] __initdata = { { - .virtual = MX31_CS4_BASE_ADDR_VIRT, + .virtual = (unsigned long)MX31_CS4_BASE_ADDR_VIRT, .pfn = __phys_to_pfn(MX31_CS4_BASE_ADDR), .length = MX31_CS4_SIZE, .type = MT_DEVICE diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index d46290b288eda7a6d6b0f26d5ed3f89c8f9195b6..459e754ef8c9162accb2d6b5c698af67cc52fa4d 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -47,7 +47,7 @@ #include #include #include -#include +#include #include "devices-imx31.h" diff --git a/arch/arm/mach-imx/mach-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c deleted file mode 100644 index 8d09c0126cabeb505a269f79c1131e9ffb5debd5..0000000000000000000000000000000000000000 --- a/arch/arm/mach-imx/mach-mx51_efikamx.c +++ /dev/null @@ -1,300 +0,0 @@ -/* - * Copyright (C) 2010 Linaro Limited - * - * based on code from the following - * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. - * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -#include "devices-imx51.h" -#include "efika.h" - -#define EFIKAMX_PCBID0 IMX_GPIO_NR(3, 16) -#define EFIKAMX_PCBID1 IMX_GPIO_NR(3, 17) -#define EFIKAMX_PCBID2 IMX_GPIO_NR(3, 11) - -#define EFIKAMX_BLUE_LED IMX_GPIO_NR(3, 13) -#define EFIKAMX_GREEN_LED IMX_GPIO_NR(3, 14) -#define EFIKAMX_RED_LED IMX_GPIO_NR(3, 15) - -#define EFIKAMX_POWER_KEY IMX_GPIO_NR(2, 31) - -/* board 1.1 doesn't have same reset gpio */ -#define EFIKAMX_RESET1_1 IMX_GPIO_NR(3, 2) -#define EFIKAMX_RESET IMX_GPIO_NR(1, 4) - -#define EFIKAMX_POWEROFF IMX_GPIO_NR(4, 13) - -#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6) - -/* the pci ids pin have pull up. they're driven low according to board id */ -#define MX51_PAD_PCBID0 IOMUX_PAD(0x518, 0x130, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) -#define MX51_PAD_PCBID1 IOMUX_PAD(0x51C, 0x134, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) -#define MX51_PAD_PCBID2 IOMUX_PAD(0x504, 0x128, 3, 0x0, 0, PAD_CTL_PUS_100K_UP) -#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE) - -static iomux_v3_cfg_t mx51efikamx_pads[] = { - /* board id */ - MX51_PAD_PCBID0, - MX51_PAD_PCBID1, - MX51_PAD_PCBID2, - - /* leds */ - MX51_PAD_CSI1_D9__GPIO3_13, - MX51_PAD_CSI1_VSYNC__GPIO3_14, - MX51_PAD_CSI1_HSYNC__GPIO3_15, - - /* power key */ - MX51_PAD_PWRKEY, - - /* reset */ - MX51_PAD_DI1_PIN13__GPIO3_2, - MX51_PAD_GPIO1_4__GPIO1_4, - - /* power off */ - MX51_PAD_CSI2_VSYNC__GPIO4_13, -}; - -/* PCBID2 PCBID1 PCBID0 STATE - 1 1 1 ER1:rev1.1 - 1 1 0 ER2:rev1.2 - 1 0 1 ER3:rev1.3 - 1 0 0 ER4:rev1.4 -*/ -static void __init mx51_efikamx_board_id(void) -{ - int id; - - /* things are taking time to settle */ - msleep(150); - - gpio_request(EFIKAMX_PCBID0, "pcbid0"); - gpio_direction_input(EFIKAMX_PCBID0); - gpio_request(EFIKAMX_PCBID1, "pcbid1"); - gpio_direction_input(EFIKAMX_PCBID1); - gpio_request(EFIKAMX_PCBID2, "pcbid2"); - gpio_direction_input(EFIKAMX_PCBID2); - - id = gpio_get_value(EFIKAMX_PCBID0) ? 1 : 0; - id |= (gpio_get_value(EFIKAMX_PCBID1) ? 1 : 0) << 1; - id |= (gpio_get_value(EFIKAMX_PCBID2) ? 1 : 0) << 2; - - switch (id) { - case 7: - system_rev = 0x11; - break; - case 6: - system_rev = 0x12; - break; - case 5: - system_rev = 0x13; - break; - case 4: - system_rev = 0x14; - break; - default: - system_rev = 0x10; - break; - } - - if ((system_rev == 0x10) - || (system_rev == 0x12) - || (system_rev == 0x14)) { - printk(KERN_WARNING - "EfikaMX: Unsupported board revision 1.%u!\n", - system_rev & 0xf); - } -} - -static struct gpio_led mx51_efikamx_leds[] __initdata = { - { - .name = "efikamx:green", - .default_trigger = "default-on", - .gpio = EFIKAMX_GREEN_LED, - }, - { - .name = "efikamx:red", - .default_trigger = "ide-disk", - .gpio = EFIKAMX_RED_LED, - }, - { - .name = "efikamx:blue", - .default_trigger = "mmc0", - .gpio = EFIKAMX_BLUE_LED, - }, -}; - -static const struct gpio_led_platform_data - mx51_efikamx_leds_data __initconst = { - .leds = mx51_efikamx_leds, - .num_leds = ARRAY_SIZE(mx51_efikamx_leds), -}; - -static struct esdhc_platform_data sd_pdata = { - .cd_type = ESDHC_CD_CONTROLLER, - .wp_type = ESDHC_WP_CONTROLLER, -}; - -static struct gpio_keys_button mx51_efikamx_powerkey[] = { - { - .code = KEY_POWER, - .gpio = EFIKAMX_POWER_KEY, - .type = EV_PWR, - .desc = "Power Button (CM)", - .wakeup = 1, - .debounce_interval = 10, /* ms */ - }, -}; - -static const struct gpio_keys_platform_data mx51_efikamx_powerkey_data __initconst = { - .buttons = mx51_efikamx_powerkey, - .nbuttons = ARRAY_SIZE(mx51_efikamx_powerkey), -}; - -static void mx51_efikamx_restart(char mode, const char *cmd) -{ - if (system_rev == 0x11) - gpio_direction_output(EFIKAMX_RESET1_1, 0); - else - gpio_direction_output(EFIKAMX_RESET, 0); -} - -static struct regulator *pwgt1, *pwgt2, *coincell; - -static void mx51_efikamx_power_off(void) -{ - if (!IS_ERR(coincell)) - regulator_disable(coincell); - - if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { - regulator_disable(pwgt2); - regulator_disable(pwgt1); - } - gpio_direction_output(EFIKAMX_POWEROFF, 1); -} - -static int __init mx51_efikamx_power_init(void) -{ - pwgt1 = regulator_get(NULL, "pwgt1"); - pwgt2 = regulator_get(NULL, "pwgt2"); - if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { - regulator_enable(pwgt1); - regulator_enable(pwgt2); - } - gpio_request(EFIKAMX_POWEROFF, "poweroff"); - pm_power_off = mx51_efikamx_power_off; - - /* enable coincell charger. maybe need a small power driver ? */ - coincell = regulator_get(NULL, "coincell"); - if (!IS_ERR(coincell)) { - regulator_set_voltage(coincell, 3000000, 3000000); - regulator_enable(coincell); - } - - regulator_has_full_constraints(); - - return 0; -} - -static void __init mx51_efikamx_init_late(void) -{ - imx51_init_late(); - mx51_efikamx_power_init(); -} - -static void __init mx51_efikamx_init(void) -{ - imx51_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(mx51efikamx_pads, - ARRAY_SIZE(mx51efikamx_pads)); - efika_board_common_init(); - - mx51_efikamx_board_id(); - - /* on < 1.2 boards both SD controllers are used */ - if (system_rev < 0x12) { - imx51_add_sdhci_esdhc_imx(0, NULL); - imx51_add_sdhci_esdhc_imx(1, &sd_pdata); - mx51_efikamx_leds[2].default_trigger = "mmc1"; - } else - imx51_add_sdhci_esdhc_imx(0, &sd_pdata); - - gpio_led_register_device(-1, &mx51_efikamx_leds_data); - imx_add_gpio_keys(&mx51_efikamx_powerkey_data); - - if (system_rev == 0x11) { - gpio_request(EFIKAMX_RESET1_1, "reset"); - gpio_direction_output(EFIKAMX_RESET1_1, 1); - } else { - gpio_request(EFIKAMX_RESET, "reset"); - gpio_direction_output(EFIKAMX_RESET, 1); - } - - /* - * enable wifi by default only on mx - * sb and mx have same wlan pin but the value to enable it are - * different :/ - */ - gpio_request(EFIKA_WLAN_EN, "wlan_en"); - gpio_direction_output(EFIKA_WLAN_EN, 0); - msleep(10); - - gpio_request(EFIKA_WLAN_RESET, "wlan_rst"); - gpio_direction_output(EFIKA_WLAN_RESET, 0); - msleep(10); - gpio_set_value(EFIKA_WLAN_RESET, 1); -} - -static void __init mx51_efikamx_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 24576000); -} - -static struct sys_timer mx51_efikamx_timer = { - .init = mx51_efikamx_timer_init, -}; - -MACHINE_START(MX51_EFIKAMX, "Genesi Efika MX (Smarttop)") - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .timer = &mx51_efikamx_timer, - .init_machine = mx51_efikamx_init, - .init_late = mx51_efikamx_init_late, - .restart = mx51_efikamx_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c deleted file mode 100644 index fdbd181b97efaf015378a3b35c44bd80197404e6..0000000000000000000000000000000000000000 --- a/arch/arm/mach-imx/mach-mx51_efikasb.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * Copyright (C) Arnaud Patard - * - * based on code from the following - * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. - * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -#include "devices-imx51.h" -#include "efika.h" - -#define EFIKASB_USBH2_STP IMX_GPIO_NR(2, 20) -#define EFIKASB_GREEN_LED IMX_GPIO_NR(1, 3) -#define EFIKASB_WHITE_LED IMX_GPIO_NR(2, 25) -#define EFIKASB_PCBID0 IMX_GPIO_NR(2, 28) -#define EFIKASB_PCBID1 IMX_GPIO_NR(2, 29) -#define EFIKASB_PWRKEY IMX_GPIO_NR(2, 31) -#define EFIKASB_LID IMX_GPIO_NR(3, 14) -#define EFIKASB_POWEROFF IMX_GPIO_NR(4, 13) -#define EFIKASB_RFKILL IMX_GPIO_NR(3, 1) - -#define MX51_PAD_PWRKEY IOMUX_PAD(0x48c, 0x0f8, 1, 0x0, 0, PAD_CTL_PUS_100K_UP | PAD_CTL_PKE) -#define MX51_PAD_SD1_CD IOMUX_PAD(0x47c, 0x0e8, 1, __NA_, 0, MX51_ESDHC_PAD_CTRL) - -static iomux_v3_cfg_t mx51efikasb_pads[] = { - /* USB HOST2 */ - MX51_PAD_EIM_D16__USBH2_DATA0, - MX51_PAD_EIM_D17__USBH2_DATA1, - MX51_PAD_EIM_D18__USBH2_DATA2, - MX51_PAD_EIM_D19__USBH2_DATA3, - MX51_PAD_EIM_D20__USBH2_DATA4, - MX51_PAD_EIM_D21__USBH2_DATA5, - MX51_PAD_EIM_D22__USBH2_DATA6, - MX51_PAD_EIM_D23__USBH2_DATA7, - MX51_PAD_EIM_A24__USBH2_CLK, - MX51_PAD_EIM_A25__USBH2_DIR, - MX51_PAD_EIM_A26__USBH2_STP, - MX51_PAD_EIM_A27__USBH2_NXT, - - /* leds */ - MX51_PAD_EIM_CS0__GPIO2_25, - MX51_PAD_GPIO1_3__GPIO1_3, - - /* pcb id */ - MX51_PAD_EIM_CS3__GPIO2_28, - MX51_PAD_EIM_CS4__GPIO2_29, - - /* lid */ - MX51_PAD_CSI1_VSYNC__GPIO3_14, - - /* power key*/ - MX51_PAD_PWRKEY, - - /* wifi/bt button */ - MX51_PAD_DI1_PIN12__GPIO3_1, - - /* power off */ - MX51_PAD_CSI2_VSYNC__GPIO4_13, - - /* wdog reset */ - MX51_PAD_GPIO1_4__WDOG1_WDOG_B, - - /* BT */ - MX51_PAD_EIM_A17__GPIO2_11, - - MX51_PAD_SD1_CD, -}; - -static int initialize_usbh2_port(struct platform_device *pdev) -{ - iomux_v3_cfg_t usbh2stp = MX51_PAD_EIM_A26__USBH2_STP; - iomux_v3_cfg_t usbh2gpio = MX51_PAD_EIM_A26__GPIO2_20; - - mxc_iomux_v3_setup_pad(usbh2gpio); - gpio_request(EFIKASB_USBH2_STP, "usbh2_stp"); - gpio_direction_output(EFIKASB_USBH2_STP, 0); - msleep(1); - gpio_set_value(EFIKASB_USBH2_STP, 1); - msleep(1); - - gpio_free(EFIKASB_USBH2_STP); - mxc_iomux_v3_setup_pad(usbh2stp); - - mdelay(10); - - return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD); -} - -static struct mxc_usbh_platform_data usbh2_config __initdata = { - .init = initialize_usbh2_port, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static void __init mx51_efikasb_usb(void) -{ - usbh2_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND); - if (usbh2_config.otg) - imx51_add_mxc_ehci_hs(2, &usbh2_config); -} - -static const struct gpio_led mx51_efikasb_leds[] __initconst = { - { - .name = "efikasb:green", - .default_trigger = "default-on", - .gpio = EFIKASB_GREEN_LED, - .active_low = 1, - }, - { - .name = "efikasb:white", - .default_trigger = "caps", - .gpio = EFIKASB_WHITE_LED, - }, -}; - -static const struct gpio_led_platform_data - mx51_efikasb_leds_data __initconst = { - .leds = mx51_efikasb_leds, - .num_leds = ARRAY_SIZE(mx51_efikasb_leds), -}; - -static struct gpio_keys_button mx51_efikasb_keys[] = { - { - .code = KEY_POWER, - .gpio = EFIKASB_PWRKEY, - .type = EV_KEY, - .desc = "Power Button", - .wakeup = 1, - .active_low = 1, - }, - { - .code = SW_LID, - .gpio = EFIKASB_LID, - .type = EV_SW, - .desc = "Lid Switch", - .active_low = 1, - }, - { - .code = KEY_RFKILL, - .gpio = EFIKASB_RFKILL, - .type = EV_KEY, - .desc = "rfkill", - .active_low = 1, - }, -}; - -static const struct gpio_keys_platform_data mx51_efikasb_keys_data __initconst = { - .buttons = mx51_efikasb_keys, - .nbuttons = ARRAY_SIZE(mx51_efikasb_keys), -}; - -static struct esdhc_platform_data sd0_pdata = { -#define EFIKASB_SD1_CD IMX_GPIO_NR(2, 27) - .cd_gpio = EFIKASB_SD1_CD, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_CONTROLLER, -}; - -static struct esdhc_platform_data sd1_pdata = { - .cd_type = ESDHC_CD_CONTROLLER, - .wp_type = ESDHC_WP_CONTROLLER, -}; - -static struct regulator *pwgt1, *pwgt2; - -static void mx51_efikasb_power_off(void) -{ - gpio_set_value(EFIKA_USB_PHY_RESET, 0); - - if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { - regulator_disable(pwgt2); - regulator_disable(pwgt1); - } - gpio_direction_output(EFIKASB_POWEROFF, 1); -} - -static int __init mx51_efikasb_power_init(void) -{ - pwgt1 = regulator_get(NULL, "pwgt1"); - pwgt2 = regulator_get(NULL, "pwgt2"); - if (!IS_ERR(pwgt1) && !IS_ERR(pwgt2)) { - regulator_enable(pwgt1); - regulator_enable(pwgt2); - } - gpio_request(EFIKASB_POWEROFF, "poweroff"); - pm_power_off = mx51_efikasb_power_off; - - regulator_has_full_constraints(); - - return 0; -} - -static void __init mx51_efikasb_init_late(void) -{ - imx51_init_late(); - mx51_efikasb_power_init(); -} - -/* 01 R1.3 board - 10 R2.0 board */ -static void __init mx51_efikasb_board_id(void) -{ - int id; - - gpio_request(EFIKASB_PCBID0, "pcb id0"); - gpio_direction_input(EFIKASB_PCBID0); - gpio_request(EFIKASB_PCBID1, "pcb id1"); - gpio_direction_input(EFIKASB_PCBID1); - - id = gpio_get_value(EFIKASB_PCBID0) ? 1 : 0; - id |= (gpio_get_value(EFIKASB_PCBID1) ? 1 : 0) << 1; - - switch (id) { - default: - break; - case 1: - system_rev = 0x13; - break; - case 2: - system_rev = 0x20; - break; - } -} - -static void __init efikasb_board_init(void) -{ - imx51_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(mx51efikasb_pads, - ARRAY_SIZE(mx51efikasb_pads)); - efika_board_common_init(); - - mx51_efikasb_board_id(); - mx51_efikasb_usb(); - imx51_add_sdhci_esdhc_imx(0, &sd0_pdata); - imx51_add_sdhci_esdhc_imx(1, &sd1_pdata); - - gpio_led_register_device(-1, &mx51_efikasb_leds_data); - imx_add_gpio_keys(&mx51_efikasb_keys_data); -} - -static void __init mx51_efikasb_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 24576000); -} - -static struct sys_timer mx51_efikasb_timer = { - .init = mx51_efikasb_timer_init, -}; - -MACHINE_START(MX51_EFIKASB, "Genesi Efika MX (Smartbook)") - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .init_machine = efikasb_board_init, - .init_late = mx51_efikasb_init_late, - .timer = &mx51_efikasb_timer, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c deleted file mode 100644 index 6c28e65f424d012ad4217793c8c04c31e4aacc14..0000000000000000000000000000000000000000 --- a/arch/arm/mach-imx/mach-mx53_ard.c +++ /dev/null @@ -1,272 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include "devices-imx53.h" - -#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31) -#define ARD_SD1_CD IMX_GPIO_NR(1, 1) -#define ARD_SD1_WP IMX_GPIO_NR(1, 9) -#define ARD_I2CPORTEXP_B IMX_GPIO_NR(2, 3) -#define ARD_VOLUMEDOWN IMX_GPIO_NR(4, 0) -#define ARD_HOME IMX_GPIO_NR(5, 10) -#define ARD_BACK IMX_GPIO_NR(5, 11) -#define ARD_PROG IMX_GPIO_NR(5, 12) -#define ARD_VOLUMEUP IMX_GPIO_NR(5, 13) - -static iomux_v3_cfg_t mx53_ard_pads[] = { - /* UART1 */ - MX53_PAD_PATA_DIOW__UART1_TXD_MUX, - MX53_PAD_PATA_DMACK__UART1_RXD_MUX, - /* WEIM for CS1 */ - MX53_PAD_EIM_EB3__GPIO2_31, /* ETHERNET_INT_B */ - MX53_PAD_EIM_D16__EMI_WEIM_D_16, - MX53_PAD_EIM_D17__EMI_WEIM_D_17, - MX53_PAD_EIM_D18__EMI_WEIM_D_18, - MX53_PAD_EIM_D19__EMI_WEIM_D_19, - MX53_PAD_EIM_D20__EMI_WEIM_D_20, - MX53_PAD_EIM_D21__EMI_WEIM_D_21, - MX53_PAD_EIM_D22__EMI_WEIM_D_22, - MX53_PAD_EIM_D23__EMI_WEIM_D_23, - MX53_PAD_EIM_D24__EMI_WEIM_D_24, - MX53_PAD_EIM_D25__EMI_WEIM_D_25, - MX53_PAD_EIM_D26__EMI_WEIM_D_26, - MX53_PAD_EIM_D27__EMI_WEIM_D_27, - MX53_PAD_EIM_D28__EMI_WEIM_D_28, - MX53_PAD_EIM_D29__EMI_WEIM_D_29, - MX53_PAD_EIM_D30__EMI_WEIM_D_30, - MX53_PAD_EIM_D31__EMI_WEIM_D_31, - MX53_PAD_EIM_DA0__EMI_NAND_WEIM_DA_0, - MX53_PAD_EIM_DA1__EMI_NAND_WEIM_DA_1, - MX53_PAD_EIM_DA2__EMI_NAND_WEIM_DA_2, - MX53_PAD_EIM_DA3__EMI_NAND_WEIM_DA_3, - MX53_PAD_EIM_DA4__EMI_NAND_WEIM_DA_4, - MX53_PAD_EIM_DA5__EMI_NAND_WEIM_DA_5, - MX53_PAD_EIM_DA6__EMI_NAND_WEIM_DA_6, - MX53_PAD_EIM_OE__EMI_WEIM_OE, - MX53_PAD_EIM_RW__EMI_WEIM_RW, - MX53_PAD_EIM_CS1__EMI_WEIM_CS_1, - /* SDHC1 */ - MX53_PAD_SD1_CMD__ESDHC1_CMD, - MX53_PAD_SD1_CLK__ESDHC1_CLK, - MX53_PAD_SD1_DATA0__ESDHC1_DAT0, - MX53_PAD_SD1_DATA1__ESDHC1_DAT1, - MX53_PAD_SD1_DATA2__ESDHC1_DAT2, - MX53_PAD_SD1_DATA3__ESDHC1_DAT3, - MX53_PAD_PATA_DATA8__ESDHC1_DAT4, - MX53_PAD_PATA_DATA9__ESDHC1_DAT5, - MX53_PAD_PATA_DATA10__ESDHC1_DAT6, - MX53_PAD_PATA_DATA11__ESDHC1_DAT7, - MX53_PAD_GPIO_1__GPIO1_1, - MX53_PAD_GPIO_9__GPIO1_9, - /* I2C2 */ - MX53_PAD_EIM_EB2__I2C2_SCL, - MX53_PAD_KEY_ROW3__I2C2_SDA, - /* I2C3 */ - MX53_PAD_GPIO_3__I2C3_SCL, - MX53_PAD_GPIO_16__I2C3_SDA, - /* GPIO */ - MX53_PAD_DISP0_DAT16__GPIO5_10, /* home */ - MX53_PAD_DISP0_DAT17__GPIO5_11, /* back */ - MX53_PAD_DISP0_DAT18__GPIO5_12, /* prog */ - MX53_PAD_DISP0_DAT19__GPIO5_13, /* vol up */ - MX53_PAD_GPIO_10__GPIO4_0, /* vol down */ -}; - -#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \ -{ \ - .gpio = gpio_num, \ - .type = EV_KEY, \ - .code = ev_code, \ - .active_low = act_low, \ - .desc = "btn " descr, \ - .wakeup = wake, \ -} - -static struct gpio_keys_button ard_buttons[] = { - GPIO_BUTTON(ARD_HOME, KEY_HOME, 1, "home", 0), - GPIO_BUTTON(ARD_BACK, KEY_BACK, 1, "back", 0), - GPIO_BUTTON(ARD_PROG, KEY_PROGRAM, 1, "program", 0), - GPIO_BUTTON(ARD_VOLUMEUP, KEY_VOLUMEUP, 1, "volume-up", 0), - GPIO_BUTTON(ARD_VOLUMEDOWN, KEY_VOLUMEDOWN, 1, "volume-down", 0), -}; - -static const struct gpio_keys_platform_data ard_button_data __initconst = { - .buttons = ard_buttons, - .nbuttons = ARRAY_SIZE(ard_buttons), -}; - -static struct resource ard_smsc911x_resources[] = { - { - .start = MX53_CS1_64MB_BASE_ADDR, - .end = MX53_CS1_64MB_BASE_ADDR + SZ_32M - 1, - .flags = IORESOURCE_MEM, - }, - { - /* irq number is run-time assigned */ - .flags = IORESOURCE_IRQ, - }, -}; - -struct smsc911x_platform_config ard_smsc911x_config = { - .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, - .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL, - .flags = SMSC911X_USE_32BIT, -}; - -static struct platform_device ard_smsc_lan9220_device = { - .name = "smsc911x", - .id = -1, - .num_resources = ARRAY_SIZE(ard_smsc911x_resources), - .resource = ard_smsc911x_resources, - .dev = { - .platform_data = &ard_smsc911x_config, - }, -}; - -static const struct esdhc_platform_data mx53_ard_sd1_data __initconst = { - .cd_gpio = ARD_SD1_CD, - .wp_gpio = ARD_SD1_WP, -}; - -static struct imxi2c_platform_data mx53_ard_i2c2_data = { - .bitrate = 50000, -}; - -static struct imxi2c_platform_data mx53_ard_i2c3_data = { - .bitrate = 400000, -}; - -static void __init mx53_ard_io_init(void) -{ - gpio_request(ARD_ETHERNET_INT_B, "eth-int-b"); - gpio_direction_input(ARD_ETHERNET_INT_B); - - gpio_request(ARD_I2CPORTEXP_B, "i2cptexp-rst"); - gpio_direction_output(ARD_I2CPORTEXP_B, 1); -} - -/* Config CS1 settings for ethernet controller */ -static int weim_cs_config(void) -{ - u32 reg; - void __iomem *weim_base, *iomuxc_base; - - weim_base = ioremap(MX53_WEIM_BASE_ADDR, SZ_4K); - if (!weim_base) - return -ENOMEM; - - iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K); - if (!iomuxc_base) { - iounmap(weim_base); - return -ENOMEM; - } - - /* CS1 timings for LAN9220 */ - writel(0x20001, (weim_base + 0x18)); - writel(0x0, (weim_base + 0x1C)); - writel(0x16000202, (weim_base + 0x20)); - writel(0x00000002, (weim_base + 0x24)); - writel(0x16002082, (weim_base + 0x28)); - writel(0x00000000, (weim_base + 0x2C)); - writel(0x00000000, (weim_base + 0x90)); - - /* specify 64 MB on CS1 and CS0 on GPR1 */ - reg = readl(iomuxc_base + 0x4); - reg &= ~0x3F; - reg |= 0x1B; - writel(reg, (iomuxc_base + 0x4)); - - iounmap(iomuxc_base); - iounmap(weim_base); - - return 0; -} - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vdd33a", "smsc911x"), - REGULATOR_SUPPLY("vddvario", "smsc911x"), -}; - -void __init imx53_ard_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx53_ard_pads, - ARRAY_SIZE(mx53_ard_pads)); - weim_cs_config(); -} - -static struct platform_device *devices[] __initdata = { - &ard_smsc_lan9220_device, -}; - -static void __init mx53_ard_board_init(void) -{ - imx53_soc_init(); - imx53_add_imx_uart(0, NULL); - - imx53_ard_common_init(); - mx53_ard_io_init(); - regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - ard_smsc911x_resources[1].start = gpio_to_irq(ARD_ETHERNET_INT_B); - ard_smsc911x_resources[1].end = gpio_to_irq(ARD_ETHERNET_INT_B); - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx53_add_sdhci_esdhc_imx(0, &mx53_ard_sd1_data); - imx53_add_imx2_wdt(0); - imx53_add_imx_i2c(1, &mx53_ard_i2c2_data); - imx53_add_imx_i2c(2, &mx53_ard_i2c3_data); - imx_add_gpio_keys(&ard_button_data); - imx53_add_ahci_imx(); -} - -static void __init mx53_ard_timer_init(void) -{ - mx53_clocks_init(32768, 24000000, 22579200, 0); -} - -static struct sys_timer mx53_ard_timer = { - .init = mx53_ard_timer_init, -}; - -MACHINE_START(MX53_ARD, "Freescale MX53 ARD Board") - .map_io = mx53_map_io, - .init_early = imx53_init_early, - .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, - .timer = &mx53_ard_timer, - .init_machine = mx53_ard_board_init, - .init_late = imx53_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c deleted file mode 100644 index 09fe2197b4919e51cc5016e4f44a4049342816b3..0000000000000000000000000000000000000000 --- a/arch/arm/mach-imx/mach-mx53_evk.c +++ /dev/null @@ -1,179 +0,0 @@ -/* - * Copyright (C) 2010-2011 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2010 Yong Shen. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define MX53_EVK_FEC_PHY_RST IMX_GPIO_NR(7, 6) -#define EVK_ECSPI1_CS0 IMX_GPIO_NR(2, 30) -#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19) -#define MX53EVK_LED IMX_GPIO_NR(7, 7) - -#include "devices-imx53.h" - -static iomux_v3_cfg_t mx53_evk_pads[] = { - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, - MX53_PAD_PATA_DIOR__UART2_RTS, - MX53_PAD_PATA_INTRQ__UART2_CTS, - - MX53_PAD_PATA_CS_0__UART3_TXD_MUX, - MX53_PAD_PATA_CS_1__UART3_RXD_MUX, - - MX53_PAD_EIM_D16__ECSPI1_SCLK, - MX53_PAD_EIM_D17__ECSPI1_MISO, - MX53_PAD_EIM_D18__ECSPI1_MOSI, - - /* ecspi chip select lines */ - MX53_PAD_EIM_EB2__GPIO2_30, - MX53_PAD_EIM_D19__GPIO3_19, - /* LED */ - MX53_PAD_PATA_DA_1__GPIO7_7, -}; - -static const struct imxuart_platform_data mx53_evk_uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const struct gpio_led mx53evk_leds[] __initconst = { - { - .name = "green", - .default_trigger = "heartbeat", - .gpio = MX53EVK_LED, - }, -}; - -static const struct gpio_led_platform_data mx53evk_leds_data __initconst = { - .leds = mx53evk_leds, - .num_leds = ARRAY_SIZE(mx53evk_leds), -}; - -static inline void mx53_evk_init_uart(void) -{ - imx53_add_imx_uart(0, NULL); - imx53_add_imx_uart(1, &mx53_evk_uart_pdata); - imx53_add_imx_uart(2, NULL); -} - -static const struct imxi2c_platform_data mx53_evk_i2c_data __initconst = { - .bitrate = 100000, -}; - -static inline void mx53_evk_fec_reset(void) -{ - int ret; - - /* reset FEC PHY */ - ret = gpio_request_one(MX53_EVK_FEC_PHY_RST, GPIOF_OUT_INIT_LOW, - "fec-phy-reset"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); - return; - } - msleep(1); - gpio_set_value(MX53_EVK_FEC_PHY_RST, 1); -} - -static const struct fec_platform_data mx53_evk_fec_pdata __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static struct spi_board_info mx53_evk_spi_board_info[] __initdata = { - { - .modalias = "mtd_dataflash", - .max_speed_hz = 25000000, - .bus_num = 0, - .chip_select = 1, - .mode = SPI_MODE_0, - .platform_data = NULL, - }, -}; - -static int mx53_evk_spi_cs[] = { - EVK_ECSPI1_CS0, - EVK_ECSPI1_CS1, -}; - -static const struct spi_imx_master mx53_evk_spi_data __initconst = { - .chipselect = mx53_evk_spi_cs, - .num_chipselect = ARRAY_SIZE(mx53_evk_spi_cs), -}; - -void __init imx53_evk_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx53_evk_pads, - ARRAY_SIZE(mx53_evk_pads)); -} - -static void __init mx53_evk_board_init(void) -{ - imx53_soc_init(); - imx53_evk_common_init(); - - mx53_evk_init_uart(); - mx53_evk_fec_reset(); - imx53_add_fec(&mx53_evk_fec_pdata); - - imx53_add_imx_i2c(0, &mx53_evk_i2c_data); - imx53_add_imx_i2c(1, &mx53_evk_i2c_data); - - imx53_add_sdhci_esdhc_imx(0, NULL); - imx53_add_sdhci_esdhc_imx(1, NULL); - - spi_register_board_info(mx53_evk_spi_board_info, - ARRAY_SIZE(mx53_evk_spi_board_info)); - imx53_add_ecspi(0, &mx53_evk_spi_data); - imx53_add_imx2_wdt(0); - gpio_led_register_device(-1, &mx53evk_leds_data); -} - -static void __init mx53_evk_timer_init(void) -{ - mx53_clocks_init(32768, 24000000, 22579200, 0); -} - -static struct sys_timer mx53_evk_timer = { - .init = mx53_evk_timer_init, -}; - -MACHINE_START(MX53_EVK, "Freescale MX53 EVK Board") - .map_io = mx53_map_io, - .init_early = imx53_init_early, - .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, - .timer = &mx53_evk_timer, - .init_machine = mx53_evk_board_init, - .init_late = imx53_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c deleted file mode 100644 index 8abe23c1d3c893fc191110717fd8131eea10ab41..0000000000000000000000000000000000000000 --- a/arch/arm/mach-imx/mach-mx53_loco.c +++ /dev/null @@ -1,321 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include "devices-imx53.h" - -#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8) -#define MX53_LOCO_UI1 IMX_GPIO_NR(2, 14) -#define MX53_LOCO_UI2 IMX_GPIO_NR(2, 15) -#define LOCO_FEC_PHY_RST IMX_GPIO_NR(7, 6) -#define LOCO_LED IMX_GPIO_NR(7, 7) -#define LOCO_SD3_CD IMX_GPIO_NR(3, 11) -#define LOCO_SD3_WP IMX_GPIO_NR(3, 12) -#define LOCO_SD1_CD IMX_GPIO_NR(3, 13) -#define LOCO_ACCEL_EN IMX_GPIO_NR(6, 14) - -static iomux_v3_cfg_t mx53_loco_pads[] = { - /* FEC */ - MX53_PAD_FEC_MDC__FEC_MDC, - MX53_PAD_FEC_MDIO__FEC_MDIO, - MX53_PAD_FEC_REF_CLK__FEC_TX_CLK, - MX53_PAD_FEC_RX_ER__FEC_RX_ER, - MX53_PAD_FEC_CRS_DV__FEC_RX_DV, - MX53_PAD_FEC_RXD1__FEC_RDATA_1, - MX53_PAD_FEC_RXD0__FEC_RDATA_0, - MX53_PAD_FEC_TX_EN__FEC_TX_EN, - MX53_PAD_FEC_TXD1__FEC_TDATA_1, - MX53_PAD_FEC_TXD0__FEC_TDATA_0, - /* FEC_nRST */ - MX53_PAD_PATA_DA_0__GPIO7_6, - /* FEC_nINT */ - MX53_PAD_PATA_DATA4__GPIO2_4, - /* AUDMUX5 */ - MX53_PAD_KEY_COL0__AUDMUX_AUD5_TXC, - MX53_PAD_KEY_ROW0__AUDMUX_AUD5_TXD, - MX53_PAD_KEY_COL1__AUDMUX_AUD5_TXFS, - MX53_PAD_KEY_ROW1__AUDMUX_AUD5_RXD, - /* I2C1 */ - MX53_PAD_CSI0_DAT8__I2C1_SDA, - MX53_PAD_CSI0_DAT9__I2C1_SCL, - MX53_PAD_NANDF_CS1__GPIO6_14, /* Accelerometer Enable */ - /* I2C2 */ - MX53_PAD_KEY_COL3__I2C2_SCL, - MX53_PAD_KEY_ROW3__I2C2_SDA, - /* SD1 */ - MX53_PAD_SD1_CMD__ESDHC1_CMD, - MX53_PAD_SD1_CLK__ESDHC1_CLK, - MX53_PAD_SD1_DATA0__ESDHC1_DAT0, - MX53_PAD_SD1_DATA1__ESDHC1_DAT1, - MX53_PAD_SD1_DATA2__ESDHC1_DAT2, - MX53_PAD_SD1_DATA3__ESDHC1_DAT3, - /* SD1_CD */ - MX53_PAD_EIM_DA13__GPIO3_13, - /* SD3 */ - MX53_PAD_PATA_DATA8__ESDHC3_DAT0, - MX53_PAD_PATA_DATA9__ESDHC3_DAT1, - MX53_PAD_PATA_DATA10__ESDHC3_DAT2, - MX53_PAD_PATA_DATA11__ESDHC3_DAT3, - MX53_PAD_PATA_DATA0__ESDHC3_DAT4, - MX53_PAD_PATA_DATA1__ESDHC3_DAT5, - MX53_PAD_PATA_DATA2__ESDHC3_DAT6, - MX53_PAD_PATA_DATA3__ESDHC3_DAT7, - MX53_PAD_PATA_IORDY__ESDHC3_CLK, - MX53_PAD_PATA_RESET_B__ESDHC3_CMD, - /* SD3_CD */ - MX53_PAD_EIM_DA11__GPIO3_11, - /* SD3_WP */ - MX53_PAD_EIM_DA12__GPIO3_12, - /* VGA */ - MX53_PAD_EIM_OE__IPU_DI1_PIN7, - MX53_PAD_EIM_RW__IPU_DI1_PIN8, - /* DISPLB */ - MX53_PAD_EIM_D20__IPU_SER_DISP0_CS, - MX53_PAD_EIM_D21__IPU_DISPB0_SER_CLK, - MX53_PAD_EIM_D22__IPU_DISPB0_SER_DIN, - MX53_PAD_EIM_D23__IPU_DI0_D0_CS, - /* DISP0_POWER_EN */ - MX53_PAD_EIM_D24__GPIO3_24, - /* DISP0 DET INT */ - MX53_PAD_EIM_D31__GPIO3_31, - /* LVDS */ - MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3, - MX53_PAD_LVDS0_CLK_P__LDB_LVDS0_CLK, - MX53_PAD_LVDS0_TX2_P__LDB_LVDS0_TX2, - MX53_PAD_LVDS0_TX1_P__LDB_LVDS0_TX1, - MX53_PAD_LVDS0_TX0_P__LDB_LVDS0_TX0, - MX53_PAD_LVDS1_TX3_P__LDB_LVDS1_TX3, - MX53_PAD_LVDS1_TX2_P__LDB_LVDS1_TX2, - MX53_PAD_LVDS1_CLK_P__LDB_LVDS1_CLK, - MX53_PAD_LVDS1_TX1_P__LDB_LVDS1_TX1, - MX53_PAD_LVDS1_TX0_P__LDB_LVDS1_TX0, - /* I2C1 */ - MX53_PAD_CSI0_DAT8__I2C1_SDA, - MX53_PAD_CSI0_DAT9__I2C1_SCL, - /* UART1 */ - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - /* CSI0 */ - MX53_PAD_CSI0_DAT12__IPU_CSI0_D_12, - MX53_PAD_CSI0_DAT13__IPU_CSI0_D_13, - MX53_PAD_CSI0_DAT14__IPU_CSI0_D_14, - MX53_PAD_CSI0_DAT15__IPU_CSI0_D_15, - MX53_PAD_CSI0_DAT16__IPU_CSI0_D_16, - MX53_PAD_CSI0_DAT17__IPU_CSI0_D_17, - MX53_PAD_CSI0_DAT18__IPU_CSI0_D_18, - MX53_PAD_CSI0_DAT19__IPU_CSI0_D_19, - MX53_PAD_CSI0_VSYNC__IPU_CSI0_VSYNC, - MX53_PAD_CSI0_MCLK__IPU_CSI0_HSYNC, - MX53_PAD_CSI0_PIXCLK__IPU_CSI0_PIXCLK, - /* DISPLAY */ - MX53_PAD_DI0_DISP_CLK__IPU_DI0_DISP_CLK, - MX53_PAD_DI0_PIN15__IPU_DI0_PIN15, - MX53_PAD_DI0_PIN2__IPU_DI0_PIN2, - MX53_PAD_DI0_PIN3__IPU_DI0_PIN3, - MX53_PAD_DISP0_DAT0__IPU_DISP0_DAT_0, - MX53_PAD_DISP0_DAT1__IPU_DISP0_DAT_1, - MX53_PAD_DISP0_DAT2__IPU_DISP0_DAT_2, - MX53_PAD_DISP0_DAT3__IPU_DISP0_DAT_3, - MX53_PAD_DISP0_DAT4__IPU_DISP0_DAT_4, - MX53_PAD_DISP0_DAT5__IPU_DISP0_DAT_5, - MX53_PAD_DISP0_DAT6__IPU_DISP0_DAT_6, - MX53_PAD_DISP0_DAT7__IPU_DISP0_DAT_7, - MX53_PAD_DISP0_DAT8__IPU_DISP0_DAT_8, - MX53_PAD_DISP0_DAT9__IPU_DISP0_DAT_9, - MX53_PAD_DISP0_DAT10__IPU_DISP0_DAT_10, - MX53_PAD_DISP0_DAT11__IPU_DISP0_DAT_11, - MX53_PAD_DISP0_DAT12__IPU_DISP0_DAT_12, - MX53_PAD_DISP0_DAT13__IPU_DISP0_DAT_13, - MX53_PAD_DISP0_DAT14__IPU_DISP0_DAT_14, - MX53_PAD_DISP0_DAT15__IPU_DISP0_DAT_15, - MX53_PAD_DISP0_DAT16__IPU_DISP0_DAT_16, - MX53_PAD_DISP0_DAT17__IPU_DISP0_DAT_17, - MX53_PAD_DISP0_DAT18__IPU_DISP0_DAT_18, - MX53_PAD_DISP0_DAT19__IPU_DISP0_DAT_19, - MX53_PAD_DISP0_DAT20__IPU_DISP0_DAT_20, - MX53_PAD_DISP0_DAT21__IPU_DISP0_DAT_21, - MX53_PAD_DISP0_DAT22__IPU_DISP0_DAT_22, - MX53_PAD_DISP0_DAT23__IPU_DISP0_DAT_23, - /* Audio CLK*/ - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK, - /* PWM */ - MX53_PAD_GPIO_1__PWM2_PWMO, - /* SPDIF */ - MX53_PAD_GPIO_7__SPDIF_PLOCK, - MX53_PAD_GPIO_17__SPDIF_OUT1, - /* GPIO */ - MX53_PAD_PATA_DA_1__GPIO7_7, /* LED */ - MX53_PAD_PATA_DA_2__GPIO7_8, - MX53_PAD_PATA_DATA5__GPIO2_5, - MX53_PAD_PATA_DATA6__GPIO2_6, - MX53_PAD_PATA_DATA14__GPIO2_14, - MX53_PAD_PATA_DATA15__GPIO2_15, - MX53_PAD_PATA_INTRQ__GPIO7_2, - MX53_PAD_EIM_WAIT__GPIO5_0, - MX53_PAD_NANDF_WP_B__GPIO6_9, - MX53_PAD_NANDF_RB0__GPIO6_10, - MX53_PAD_NANDF_CS1__GPIO6_14, - MX53_PAD_NANDF_CS2__GPIO6_15, - MX53_PAD_NANDF_CS3__GPIO6_16, - MX53_PAD_GPIO_5__GPIO1_5, - MX53_PAD_GPIO_16__GPIO7_11, - MX53_PAD_GPIO_8__GPIO1_8, -}; - -#define GPIO_BUTTON(gpio_num, ev_code, act_low, descr, wake) \ -{ \ - .gpio = gpio_num, \ - .type = EV_KEY, \ - .code = ev_code, \ - .active_low = act_low, \ - .desc = "btn " descr, \ - .wakeup = wake, \ -} - -static struct gpio_keys_button loco_buttons[] = { - GPIO_BUTTON(MX53_LOCO_POWER, KEY_POWER, 1, "power", 0), - GPIO_BUTTON(MX53_LOCO_UI1, KEY_VOLUMEUP, 1, "volume-up", 0), - GPIO_BUTTON(MX53_LOCO_UI2, KEY_VOLUMEDOWN, 1, "volume-down", 0), -}; - -static const struct gpio_keys_platform_data loco_button_data __initconst = { - .buttons = loco_buttons, - .nbuttons = ARRAY_SIZE(loco_buttons), -}; - -static const struct esdhc_platform_data mx53_loco_sd1_data __initconst = { - .cd_gpio = LOCO_SD1_CD, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_NONE, -}; - -static const struct esdhc_platform_data mx53_loco_sd3_data __initconst = { - .cd_gpio = LOCO_SD3_CD, - .wp_gpio = LOCO_SD3_WP, - .cd_type = ESDHC_CD_GPIO, - .wp_type = ESDHC_WP_GPIO, -}; - -static inline void mx53_loco_fec_reset(void) -{ - int ret; - - /* reset FEC PHY */ - ret = gpio_request(LOCO_FEC_PHY_RST, "fec-phy-reset"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); - return; - } - gpio_direction_output(LOCO_FEC_PHY_RST, 0); - msleep(1); - gpio_set_value(LOCO_FEC_PHY_RST, 1); -} - -static const struct fec_platform_data mx53_loco_fec_data __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct imxi2c_platform_data mx53_loco_i2c_data __initconst = { - .bitrate = 100000, -}; - -static const struct gpio_led mx53loco_leds[] __initconst = { - { - .name = "green", - .default_trigger = "heartbeat", - .gpio = LOCO_LED, - }, -}; - -static const struct gpio_led_platform_data mx53loco_leds_data __initconst = { - .leds = mx53loco_leds, - .num_leds = ARRAY_SIZE(mx53loco_leds), -}; - -void __init imx53_qsb_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx53_loco_pads, - ARRAY_SIZE(mx53_loco_pads)); -} - -static struct i2c_board_info mx53loco_i2c_devices[] = { - { - I2C_BOARD_INFO("mma8450", 0x1C), - }, -}; - -static void __init mx53_loco_board_init(void) -{ - int ret; - imx53_soc_init(); - imx53_qsb_common_init(); - - imx53_add_imx_uart(0, NULL); - mx53_loco_fec_reset(); - imx53_add_fec(&mx53_loco_fec_data); - imx53_add_imx2_wdt(0); - - ret = gpio_request_one(LOCO_ACCEL_EN, GPIOF_OUT_INIT_HIGH, "accel_en"); - if (ret) - pr_err("Cannot request ACCEL_EN pin: %d\n", ret); - - i2c_register_board_info(0, mx53loco_i2c_devices, - ARRAY_SIZE(mx53loco_i2c_devices)); - imx53_add_imx_i2c(0, &mx53_loco_i2c_data); - imx53_add_imx_i2c(1, &mx53_loco_i2c_data); - imx53_add_sdhci_esdhc_imx(0, &mx53_loco_sd1_data); - imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data); - imx_add_gpio_keys(&loco_button_data); - gpio_led_register_device(-1, &mx53loco_leds_data); - imx53_add_ahci_imx(); -} - -static void __init mx53_loco_timer_init(void) -{ - mx53_clocks_init(32768, 24000000, 0, 0); -} - -static struct sys_timer mx53_loco_timer = { - .init = mx53_loco_timer_init, -}; - -MACHINE_START(MX53_LOCO, "Freescale MX53 LOCO Board") - .map_io = mx53_map_io, - .init_early = imx53_init_early, - .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, - .timer = &mx53_loco_timer, - .init_machine = mx53_loco_board_init, - .init_late = imx53_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mach-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c deleted file mode 100644 index b15d6a6d3b6873c77e13283ba9103f4da3e62091..0000000000000000000000000000000000000000 --- a/arch/arm/mach-imx/mach-mx53_smd.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved. - */ - -/* - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include "devices-imx53.h" - -#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6) -#define MX53_SMD_SATA_PWR_EN IMX_GPIO_NR(3, 3) - -static iomux_v3_cfg_t mx53_smd_pads[] = { - MX53_PAD_CSI0_DAT10__UART1_TXD_MUX, - MX53_PAD_CSI0_DAT11__UART1_RXD_MUX, - - MX53_PAD_PATA_BUFFER_EN__UART2_RXD_MUX, - MX53_PAD_PATA_DMARQ__UART2_TXD_MUX, - - MX53_PAD_PATA_CS_0__UART3_TXD_MUX, - MX53_PAD_PATA_CS_1__UART3_RXD_MUX, - MX53_PAD_PATA_DA_1__UART3_CTS, - MX53_PAD_PATA_DA_2__UART3_RTS, - /* I2C1 */ - MX53_PAD_CSI0_DAT8__I2C1_SDA, - MX53_PAD_CSI0_DAT9__I2C1_SCL, - /* SD1 */ - MX53_PAD_SD1_CMD__ESDHC1_CMD, - MX53_PAD_SD1_CLK__ESDHC1_CLK, - MX53_PAD_SD1_DATA0__ESDHC1_DAT0, - MX53_PAD_SD1_DATA1__ESDHC1_DAT1, - MX53_PAD_SD1_DATA2__ESDHC1_DAT2, - MX53_PAD_SD1_DATA3__ESDHC1_DAT3, - /* SD2 */ - MX53_PAD_SD2_CMD__ESDHC2_CMD, - MX53_PAD_SD2_CLK__ESDHC2_CLK, - MX53_PAD_SD2_DATA0__ESDHC2_DAT0, - MX53_PAD_SD2_DATA1__ESDHC2_DAT1, - MX53_PAD_SD2_DATA2__ESDHC2_DAT2, - MX53_PAD_SD2_DATA3__ESDHC2_DAT3, - /* SD3 */ - MX53_PAD_PATA_DATA8__ESDHC3_DAT0, - MX53_PAD_PATA_DATA9__ESDHC3_DAT1, - MX53_PAD_PATA_DATA10__ESDHC3_DAT2, - MX53_PAD_PATA_DATA11__ESDHC3_DAT3, - MX53_PAD_PATA_DATA0__ESDHC3_DAT4, - MX53_PAD_PATA_DATA1__ESDHC3_DAT5, - MX53_PAD_PATA_DATA2__ESDHC3_DAT6, - MX53_PAD_PATA_DATA3__ESDHC3_DAT7, - MX53_PAD_PATA_IORDY__ESDHC3_CLK, - MX53_PAD_PATA_RESET_B__ESDHC3_CMD, -}; - -static const struct imxuart_platform_data mx53_smd_uart_data __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static inline void mx53_smd_init_uart(void) -{ - imx53_add_imx_uart(0, NULL); - imx53_add_imx_uart(1, NULL); - imx53_add_imx_uart(2, &mx53_smd_uart_data); -} - -static inline void mx53_smd_fec_reset(void) -{ - int ret; - - /* reset FEC PHY */ - ret = gpio_request(SMD_FEC_PHY_RST, "fec-phy-reset"); - if (ret) { - printk(KERN_ERR"failed to get GPIO_FEC_PHY_RESET: %d\n", ret); - return; - } - gpio_direction_output(SMD_FEC_PHY_RST, 0); - msleep(1); - gpio_set_value(SMD_FEC_PHY_RST, 1); -} - -static const struct fec_platform_data mx53_smd_fec_data __initconst = { - .phy = PHY_INTERFACE_MODE_RMII, -}; - -static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = { - .bitrate = 100000, -}; - -static inline void mx53_smd_ahci_pwr_on(void) -{ - int ret; - - /* Enable SATA PWR */ - ret = gpio_request_one(MX53_SMD_SATA_PWR_EN, - GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr"); - if (ret) { - pr_err("failed to enable SATA_PWR_EN: %d\n", ret); - return; - } -} - -void __init imx53_smd_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx53_smd_pads, - ARRAY_SIZE(mx53_smd_pads)); -} - -static void __init mx53_smd_board_init(void) -{ - imx53_soc_init(); - imx53_smd_common_init(); - - mx53_smd_init_uart(); - mx53_smd_fec_reset(); - imx53_add_fec(&mx53_smd_fec_data); - imx53_add_imx2_wdt(0); - imx53_add_imx_i2c(0, &mx53_smd_i2c_data); - imx53_add_sdhci_esdhc_imx(0, NULL); - imx53_add_sdhci_esdhc_imx(1, NULL); - imx53_add_sdhci_esdhc_imx(2, NULL); - mx53_smd_ahci_pwr_on(); - imx53_add_ahci_imx(); -} - -static void __init mx53_smd_timer_init(void) -{ - mx53_clocks_init(32768, 24000000, 22579200, 0); -} - -static struct sys_timer mx53_smd_timer = { - .init = mx53_smd_timer_init, -}; - -MACHINE_START(MX53_SMD, "Freescale MX53 SMD Board") - .map_io = mx53_map_io, - .init_early = imx53_init_early, - .init_irq = mx53_init_irq, - .handle_irq = imx53_handle_irq, - .timer = &mx53_smd_timer, - .init_machine = mx53_smd_board_init, - .init_late = imx53_init_late, - .restart = mxc_restart, -MACHINE_END diff --git a/arch/arm/mach-imx/mm-imx5.c b/arch/arm/mach-imx/mm-imx5.c index 52d8f534be101e90eacdf66df7997eb55c3dbaad..acb0aadb425541baabff4dc82f7d6a0b34c8ad09 100644 --- a/arch/arm/mach-imx/mm-imx5.c +++ b/arch/arm/mach-imx/mm-imx5.c @@ -128,25 +128,6 @@ static struct sdma_platform_data imx51_sdma_pdata __initdata = { .script_addrs = &imx51_sdma_script, }; -static struct sdma_script_start_addrs imx53_sdma_script __initdata = { - .ap_2_ap_addr = 642, - .app_2_mcu_addr = 683, - .mcu_2_app_addr = 747, - .uart_2_mcu_addr = 817, - .shp_2_mcu_addr = 891, - .mcu_2_shp_addr = 960, - .uartsh_2_mcu_addr = 1032, - .spdif_2_mcu_addr = 1100, - .mcu_2_spdif_addr = 1134, - .firi_2_mcu_addr = 1193, - .mcu_2_firi_addr = 1290, -}; - -static struct sdma_platform_data imx53_sdma_pdata __initdata = { - .fw_name = "sdma-imx53.bin", - .script_addrs = &imx53_sdma_script, -}; - static const struct resource imx50_audmux_res[] __initconst = { DEFINE_RES_MEM(MX50_AUDMUX_BASE_ADDR, SZ_16K), }; @@ -155,10 +136,6 @@ static const struct resource imx51_audmux_res[] __initconst = { DEFINE_RES_MEM(MX51_AUDMUX_BASE_ADDR, SZ_16K), }; -static const struct resource imx53_audmux_res[] __initconst = { - DEFINE_RES_MEM(MX53_AUDMUX_BASE_ADDR, SZ_16K), -}; - void __init imx50_soc_init(void) { /* i.mx50 has the i.mx35 type gpio */ @@ -196,30 +173,6 @@ void __init imx51_soc_init(void) ARRAY_SIZE(imx51_audmux_res)); } -void __init imx53_soc_init(void) -{ - /* i.mx53 has the i.mx35 type gpio */ - mxc_register_gpio("imx35-gpio", 0, MX53_GPIO1_BASE_ADDR, SZ_16K, MX53_INT_GPIO1_LOW, MX53_INT_GPIO1_HIGH); - mxc_register_gpio("imx35-gpio", 1, MX53_GPIO2_BASE_ADDR, SZ_16K, MX53_INT_GPIO2_LOW, MX53_INT_GPIO2_HIGH); - mxc_register_gpio("imx35-gpio", 2, MX53_GPIO3_BASE_ADDR, SZ_16K, MX53_INT_GPIO3_LOW, MX53_INT_GPIO3_HIGH); - mxc_register_gpio("imx35-gpio", 3, MX53_GPIO4_BASE_ADDR, SZ_16K, MX53_INT_GPIO4_LOW, MX53_INT_GPIO4_HIGH); - mxc_register_gpio("imx35-gpio", 4, MX53_GPIO5_BASE_ADDR, SZ_16K, MX53_INT_GPIO5_LOW, MX53_INT_GPIO5_HIGH); - mxc_register_gpio("imx35-gpio", 5, MX53_GPIO6_BASE_ADDR, SZ_16K, MX53_INT_GPIO6_LOW, MX53_INT_GPIO6_HIGH); - mxc_register_gpio("imx35-gpio", 6, MX53_GPIO7_BASE_ADDR, SZ_16K, MX53_INT_GPIO7_LOW, MX53_INT_GPIO7_HIGH); - - pinctrl_provide_dummies(); - /* i.mx53 has the i.mx35 type sdma */ - imx_add_imx_sdma("imx35-sdma", MX53_SDMA_BASE_ADDR, MX53_INT_SDMA, &imx53_sdma_pdata); - - /* Setup AIPS registers */ - imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS1_BASE_ADDR)); - imx_set_aips(MX53_IO_ADDRESS(MX53_AIPS2_BASE_ADDR)); - - /* i.mx53 has the i.mx31 type audmux */ - platform_device_register_simple("imx31-audmux", 0, imx53_audmux_res, - ARRAY_SIZE(imx53_audmux_res)); -} - void __init imx51_init_late(void) { mx51_neon_fixup(); diff --git a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c index b09ee12a4ff0b7af7976d9c6967b519253ed8d33..fb38436ca67fe6c03b28a61818f76fb04a73e4b4 100644 --- a/arch/arm/mach-imx/mx1-camera-fiq-ksym.c +++ b/arch/arm/mach-imx/mx1-camera-fiq-ksym.c @@ -11,7 +11,7 @@ #include #include -#include +#include /* IMX camera FIQ handler */ EXPORT_SYMBOL(mx1_camera_sof_fiq_start); diff --git a/arch/arm/mach-imx/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c deleted file mode 100644 index ee870c49bc636c5f95f3aa01bd6cc1602fb6d1c5..0000000000000000000000000000000000000000 --- a/arch/arm/mach-imx/mx51_efika.c +++ /dev/null @@ -1,633 +0,0 @@ -/* - * based on code from the following - * Copyright 2009-2010 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2009-2010 Pegatron Corporation. All Rights Reserved. - * Copyright 2009-2010 Genesi USA, Inc. All Rights Reserved. - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include - -#include "devices-imx51.h" -#include "efika.h" -#include "cpu_op-mx51.h" - -#define MX51_USB_CTRL_1_OFFSET 0x10 -#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) -#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 - -#define EFIKAMX_USB_HUB_RESET IMX_GPIO_NR(1, 5) -#define EFIKAMX_USBH1_STP IMX_GPIO_NR(1, 27) - -#define EFIKAMX_SPI_CS0 IMX_GPIO_NR(4, 24) -#define EFIKAMX_SPI_CS1 IMX_GPIO_NR(4, 25) - -#define EFIKAMX_PMIC IMX_GPIO_NR(1, 6) - -static iomux_v3_cfg_t mx51efika_pads[] = { - /* UART1 */ - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, - - /* SD 1 */ - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - - /* SD 2 */ - MX51_PAD_SD2_CMD__SD2_CMD, - MX51_PAD_SD2_CLK__SD2_CLK, - MX51_PAD_SD2_DATA0__SD2_DATA0, - MX51_PAD_SD2_DATA1__SD2_DATA1, - MX51_PAD_SD2_DATA2__SD2_DATA2, - MX51_PAD_SD2_DATA3__SD2_DATA3, - - /* SD/MMC WP/CD */ - MX51_PAD_GPIO1_0__SD1_CD, - MX51_PAD_GPIO1_1__SD1_WP, - MX51_PAD_GPIO1_7__SD2_WP, - MX51_PAD_GPIO1_8__SD2_CD, - - /* spi */ - MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI, - MX51_PAD_CSPI1_MISO__ECSPI1_MISO, - MX51_PAD_CSPI1_SS0__GPIO4_24, - MX51_PAD_CSPI1_SS1__GPIO4_25, - MX51_PAD_CSPI1_RDY__ECSPI1_RDY, - MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK, - MX51_PAD_GPIO1_6__GPIO1_6, - - /* USB HOST1 */ - MX51_PAD_USBH1_CLK__USBH1_CLK, - MX51_PAD_USBH1_DIR__USBH1_DIR, - MX51_PAD_USBH1_NXT__USBH1_NXT, - MX51_PAD_USBH1_DATA0__USBH1_DATA0, - MX51_PAD_USBH1_DATA1__USBH1_DATA1, - MX51_PAD_USBH1_DATA2__USBH1_DATA2, - MX51_PAD_USBH1_DATA3__USBH1_DATA3, - MX51_PAD_USBH1_DATA4__USBH1_DATA4, - MX51_PAD_USBH1_DATA5__USBH1_DATA5, - MX51_PAD_USBH1_DATA6__USBH1_DATA6, - MX51_PAD_USBH1_DATA7__USBH1_DATA7, - - /* USB HUB RESET */ - MX51_PAD_GPIO1_5__GPIO1_5, - - /* WLAN */ - MX51_PAD_EIM_A22__GPIO2_16, - MX51_PAD_EIM_A16__GPIO2_10, - - /* USB PHY RESET */ - MX51_PAD_EIM_D27__GPIO2_9, -}; - -/* Serial ports */ -static const struct imxuart_platform_data uart_pdata = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -/* This function is board specific as the bit mask for the plldiv will also - * be different for other Freescale SoCs, thus a common bitmask is not - * possible and cannot get place in /plat-mxc/ehci.c. - */ -static int initialize_otg_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); - - /* Set the PHY clock to 19.2MHz */ - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; - v |= MX51_USB_PLL_DIV_19_2_MHZ; - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_INTERNAL_PHY); -} - -static const struct mxc_usbh_platform_data dr_utmi_config __initconst = { - .init = initialize_otg_port, - .portsc = MXC_EHCI_UTMI_16BIT, -}; - -static int initialize_usbh1_port(struct platform_device *pdev) -{ - iomux_v3_cfg_t usbh1stp = MX51_PAD_USBH1_STP__USBH1_STP; - iomux_v3_cfg_t usbh1gpio = MX51_PAD_USBH1_STP__GPIO1_27; - u32 v; - void __iomem *usb_base; - void __iomem *socregs_base; - - mxc_iomux_v3_setup_pad(usbh1gpio); - gpio_request(EFIKAMX_USBH1_STP, "usbh1_stp"); - gpio_direction_output(EFIKAMX_USBH1_STP, 0); - msleep(1); - gpio_set_value(EFIKAMX_USBH1_STP, 1); - msleep(1); - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - socregs_base = (void __iomem *)(usb_base + MX5_USBOTHER_REGS_OFFSET); - - /* The clock for the USBH1 ULPI port will come externally */ - /* from the PHY. */ - v = __raw_readl(socregs_base + MX51_USB_CTRL_1_OFFSET); - __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, - socregs_base + MX51_USB_CTRL_1_OFFSET); - - iounmap(usb_base); - - gpio_free(EFIKAMX_USBH1_STP); - mxc_iomux_v3_setup_pad(usbh1stp); - - mdelay(10); - - return mx51_initialize_usb_hw(pdev->id, MXC_EHCI_ITC_NO_THRESHOLD); -} - -static struct mxc_usbh_platform_data usbh1_config __initdata = { - .init = initialize_usbh1_port, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static void mx51_efika_hubreset(void) -{ - gpio_request(EFIKAMX_USB_HUB_RESET, "usb_hub_rst"); - gpio_direction_output(EFIKAMX_USB_HUB_RESET, 1); - msleep(1); - gpio_set_value(EFIKAMX_USB_HUB_RESET, 0); - msleep(1); - gpio_set_value(EFIKAMX_USB_HUB_RESET, 1); -} - -static void __init mx51_efika_usb(void) -{ - mx51_efika_hubreset(); - - /* pulling it low, means no USB at all... */ - gpio_request(EFIKA_USB_PHY_RESET, "usb_phy_reset"); - gpio_direction_output(EFIKA_USB_PHY_RESET, 0); - msleep(1); - gpio_set_value(EFIKA_USB_PHY_RESET, 1); - - usbh1_config.otg = imx_otg_ulpi_create(ULPI_OTG_DRVVBUS | - ULPI_OTG_DRVVBUS_EXT | ULPI_OTG_EXTVBUSIND); - - imx51_add_mxc_ehci_otg(&dr_utmi_config); - if (usbh1_config.otg) - imx51_add_mxc_ehci_hs(1, &usbh1_config); -} - -static struct mtd_partition mx51_efika_spi_nor_partitions[] = { - { - .name = "u-boot", - .offset = 0, - .size = SZ_256K, - }, - { - .name = "config", - .offset = MTDPART_OFS_APPEND, - .size = SZ_64K, - }, -}; - -static struct flash_platform_data mx51_efika_spi_flash_data = { - .name = "spi_flash", - .parts = mx51_efika_spi_nor_partitions, - .nr_parts = ARRAY_SIZE(mx51_efika_spi_nor_partitions), - .type = "sst25vf032b", -}; - -static struct regulator_consumer_supply sw1_consumers[] = { - { - .supply = "cpu_vcc", - } -}; - -static struct regulator_consumer_supply vdig_consumers[] = { - /* sgtl5000 */ - REGULATOR_SUPPLY("VDDA", "1-000a"), - REGULATOR_SUPPLY("VDDD", "1-000a"), -}; - -static struct regulator_consumer_supply vvideo_consumers[] = { - /* sgtl5000 */ - REGULATOR_SUPPLY("VDDIO", "1-000a"), -}; - -static struct regulator_consumer_supply vsd_consumers[] = { - REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.0"), - REGULATOR_SUPPLY("vmmc", "sdhci-esdhc-imx51.1"), -}; - -static struct regulator_consumer_supply pwgt1_consumer[] = { - { - .supply = "pwgt1", - } -}; - -static struct regulator_consumer_supply pwgt2_consumer[] = { - { - .supply = "pwgt2", - } -}; - -static struct regulator_consumer_supply coincell_consumer[] = { - { - .supply = "coincell", - } -}; - -static struct regulator_init_data sw1_init = { - .constraints = { - .name = "SW1", - .min_uV = 600000, - .max_uV = 1375000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .valid_modes_mask = 0, - .always_on = 1, - .boot_on = 1, - .state_mem = { - .uV = 850000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - }, - .num_consumer_supplies = ARRAY_SIZE(sw1_consumers), - .consumer_supplies = sw1_consumers, -}; - -static struct regulator_init_data sw2_init = { - .constraints = { - .name = "SW2", - .min_uV = 900000, - .max_uV = 1850000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - .state_mem = { - .uV = 950000, - .mode = REGULATOR_MODE_NORMAL, - .enabled = 1, - }, - } -}; - -static struct regulator_init_data sw3_init = { - .constraints = { - .name = "SW3", - .min_uV = 1100000, - .max_uV = 1850000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - } -}; - -static struct regulator_init_data sw4_init = { - .constraints = { - .name = "SW4", - .min_uV = 1100000, - .max_uV = 1850000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .always_on = 1, - .boot_on = 1, - } -}; - -static struct regulator_init_data viohi_init = { - .constraints = { - .name = "VIOHI", - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vusb_init = { - .constraints = { - .name = "VUSB", - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data swbst_init = { - .constraints = { - .name = "SWBST", - } -}; - -static struct regulator_init_data vdig_init = { - .constraints = { - .name = "VDIG", - .min_uV = 1050000, - .max_uV = 1800000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(vdig_consumers), - .consumer_supplies = vdig_consumers, -}; - -static struct regulator_init_data vpll_init = { - .constraints = { - .name = "VPLL", - .min_uV = 1050000, - .max_uV = 1800000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vusb2_init = { - .constraints = { - .name = "VUSB2", - .min_uV = 2400000, - .max_uV = 2775000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vvideo_init = { - .constraints = { - .name = "VVIDEO", - .min_uV = 2775000, - .max_uV = 2775000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .apply_uV = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(vvideo_consumers), - .consumer_supplies = vvideo_consumers, -}; - -static struct regulator_init_data vaudio_init = { - .constraints = { - .name = "VAUDIO", - .min_uV = 2300000, - .max_uV = 3000000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - } -}; - -static struct regulator_init_data vsd_init = { - .constraints = { - .name = "VSD", - .min_uV = 1800000, - .max_uV = 3150000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(vsd_consumers), - .consumer_supplies = vsd_consumers, -}; - -static struct regulator_init_data vcam_init = { - .constraints = { - .name = "VCAM", - .min_uV = 2500000, - .max_uV = 3000000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | - REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, - .valid_modes_mask = REGULATOR_MODE_FAST | REGULATOR_MODE_NORMAL, - .boot_on = 1, - } -}; - -static struct regulator_init_data vgen1_init = { - .constraints = { - .name = "VGEN1", - .min_uV = 1200000, - .max_uV = 3150000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vgen2_init = { - .constraints = { - .name = "VGEN2", - .min_uV = 1200000, - .max_uV = 3150000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data vgen3_init = { - .constraints = { - .name = "VGEN3", - .min_uV = 1800000, - .max_uV = 2900000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - .boot_on = 1, - .always_on = 1, - } -}; - -static struct regulator_init_data gpo1_init = { - .constraints = { - .name = "GPO1", - } -}; - -static struct regulator_init_data gpo2_init = { - .constraints = { - .name = "GPO2", - } -}; - -static struct regulator_init_data gpo3_init = { - .constraints = { - .name = "GPO3", - } -}; - -static struct regulator_init_data gpo4_init = { - .constraints = { - .name = "GPO4", - } -}; - -static struct regulator_init_data pwgt1_init = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(pwgt1_consumer), - .consumer_supplies = pwgt1_consumer, -}; - -static struct regulator_init_data pwgt2_init = { - .constraints = { - .valid_ops_mask = REGULATOR_CHANGE_STATUS, - .boot_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(pwgt2_consumer), - .consumer_supplies = pwgt2_consumer, -}; - -static struct regulator_init_data vcoincell_init = { - .constraints = { - .name = "COINCELL", - .min_uV = 3000000, - .max_uV = 3000000, - .valid_ops_mask = - REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(coincell_consumer), - .consumer_supplies = coincell_consumer, -}; - -static struct mc13xxx_regulator_init_data mx51_efika_regulators[] = { - { .id = MC13892_SW1, .init_data = &sw1_init }, - { .id = MC13892_SW2, .init_data = &sw2_init }, - { .id = MC13892_SW3, .init_data = &sw3_init }, - { .id = MC13892_SW4, .init_data = &sw4_init }, - { .id = MC13892_SWBST, .init_data = &swbst_init }, - { .id = MC13892_VIOHI, .init_data = &viohi_init }, - { .id = MC13892_VPLL, .init_data = &vpll_init }, - { .id = MC13892_VDIG, .init_data = &vdig_init }, - { .id = MC13892_VSD, .init_data = &vsd_init }, - { .id = MC13892_VUSB2, .init_data = &vusb2_init }, - { .id = MC13892_VVIDEO, .init_data = &vvideo_init }, - { .id = MC13892_VAUDIO, .init_data = &vaudio_init }, - { .id = MC13892_VCAM, .init_data = &vcam_init }, - { .id = MC13892_VGEN1, .init_data = &vgen1_init }, - { .id = MC13892_VGEN2, .init_data = &vgen2_init }, - { .id = MC13892_VGEN3, .init_data = &vgen3_init }, - { .id = MC13892_VUSB, .init_data = &vusb_init }, - { .id = MC13892_GPO1, .init_data = &gpo1_init }, - { .id = MC13892_GPO2, .init_data = &gpo2_init }, - { .id = MC13892_GPO3, .init_data = &gpo3_init }, - { .id = MC13892_GPO4, .init_data = &gpo4_init }, - { .id = MC13892_PWGT1SPI, .init_data = &pwgt1_init }, - { .id = MC13892_PWGT2SPI, .init_data = &pwgt2_init }, - { .id = MC13892_VCOINCELL, .init_data = &vcoincell_init }, -}; - -static struct mc13xxx_platform_data mx51_efika_mc13892_data = { - .flags = MC13XXX_USE_RTC, - .regulators = { - .num_regulators = ARRAY_SIZE(mx51_efika_regulators), - .regulators = mx51_efika_regulators, - }, -}; - -static struct spi_board_info mx51_efika_spi_board_info[] __initdata = { - { - .modalias = "m25p80", - .max_speed_hz = 25000000, - .bus_num = 0, - .chip_select = 1, - .platform_data = &mx51_efika_spi_flash_data, - .irq = -1, - }, - { - .modalias = "mc13892", - .max_speed_hz = 1000000, - .bus_num = 0, - .chip_select = 0, - .platform_data = &mx51_efika_mc13892_data, - /* irq number is run-time assigned */ - }, -}; - -static int mx51_efika_spi_cs[] = { - EFIKAMX_SPI_CS0, - EFIKAMX_SPI_CS1, -}; - -static const struct spi_imx_master mx51_efika_spi_pdata __initconst = { - .chipselect = mx51_efika_spi_cs, - .num_chipselect = ARRAY_SIZE(mx51_efika_spi_cs), -}; - -void __init efika_board_common_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mx51efika_pads, - ARRAY_SIZE(mx51efika_pads)); - imx51_add_imx_uart(0, &uart_pdata); - mx51_efika_usb(); - - /* FIXME: comes from original code. check this. */ - if (mx51_revision() < IMX_CHIP_REVISION_2_0) - sw2_init.constraints.state_mem.uV = 1100000; - else if (mx51_revision() == IMX_CHIP_REVISION_2_0) { - sw2_init.constraints.state_mem.uV = 1250000; - sw1_init.constraints.state_mem.uV = 1000000; - } - if (machine_is_mx51_efikasb()) - vgen1_init.constraints.max_uV = 1200000; - - gpio_request(EFIKAMX_PMIC, "pmic irq"); - gpio_direction_input(EFIKAMX_PMIC); - mx51_efika_spi_board_info[1].irq = gpio_to_irq(EFIKAMX_PMIC); - spi_register_board_info(mx51_efika_spi_board_info, - ARRAY_SIZE(mx51_efika_spi_board_info)); - imx51_add_ecspi(0, &mx51_efika_spi_pdata); - - imx51_add_pata_imx(); - -#if defined(CONFIG_CPU_FREQ_IMX) - get_cpu_op = mx51_get_cpu_op; -#endif -} diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index ab98c6fec9ebc642fc541916c7c3f596394cf26d..2ac43e1a2dfd0b2028d13702b63b654656f8ea7c 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -41,7 +41,7 @@ void __init imx_scu_map_io(void) scu_base = IMX_IO_ADDRESS(base); } -void __cpuinit platform_secondary_init(unsigned int cpu) +static void __cpuinit imx_secondary_init(unsigned int cpu) { /* * if any interrupts are already enabled for the primary @@ -51,7 +51,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu) gic_secondary_init(0); } -int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) +static int __cpuinit imx_boot_secondary(unsigned int cpu, struct task_struct *idle) { imx_set_cpu_jump(cpu, v7_secondary_startup); imx_enable_cpu(cpu, true); @@ -62,7 +62,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle) * Initialise the CPU possible map early - this describes the CPUs * which may be present or become present in the system. */ -void __init smp_init_cpus(void) +static void __init imx_smp_init_cpus(void) { int i, ncores; @@ -79,7 +79,17 @@ void imx_smp_prepare(void) scu_enable(scu_base); } -void __init platform_smp_prepare_cpus(unsigned int max_cpus) +static void __init imx_smp_prepare_cpus(unsigned int max_cpus) { imx_smp_prepare(); } + +struct smp_operations imx_smp_ops __initdata = { + .smp_init_cpus = imx_smp_init_cpus, + .smp_prepare_cpus = imx_smp_prepare_cpus, + .smp_secondary_init = imx_secondary_init, + .smp_boot_secondary = imx_boot_secondary, +#ifdef CONFIG_HOTPLUG_CPU + .cpu_die = imx_cpu_die, +#endif +}; diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile index ebeef966e1f50544a54bfc43b70d86d616b19e01..5521d18bf19afce7d1c4244623262471bc08b044 100644 --- a/arch/arm/mach-integrator/Makefile +++ b/arch/arm/mach-integrator/Makefile @@ -4,11 +4,10 @@ # Object file lists. -obj-y := core.o lm.o +obj-y := core.o lm.o leds.o obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o -obj-$(CONFIG_LEDS) += leds.o obj-$(CONFIG_PCI) += pci_v3.o pci.o obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h index 899561d8db285c475459799b03b4dd7619c8273b..c3ff21b5ea24ececc1d2bb8a5f94b152464034e2 100644 --- a/arch/arm/mach-integrator/common.h +++ b/arch/arm/mach-integrator/common.h @@ -1,3 +1,6 @@ +#include +extern struct amba_pl010_data integrator_uart_data; void integrator_init_early(void); +int integrator_init(bool is_cp); void integrator_reserve(void); void integrator_restart(char, const char *); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index 3fa6c51390da0723ab904e17aed5a2dc7b869afe..ea22a17246d702722958ed0dbb96b63d8e45ae1a 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -28,12 +28,13 @@ #include #include -#include #include #include #include -static struct amba_pl010_data integrator_uart_data; +#include "common.h" + +#ifdef CONFIG_ATAGS #define INTEGRATOR_RTC_IRQ { IRQ_RTCINT } #define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 } @@ -61,7 +62,7 @@ static struct amba_device *amba_devs[] __initdata = { &kmi1_device, }; -static int __init integrator_init(void) +int __init integrator_init(bool is_cp) { int i; @@ -70,7 +71,7 @@ static int __init integrator_init(void) * hard-code them. The Integator/CP and forward have proper cell IDs. * Else we leave them undefined to the bus driver can autoprobe them. */ - if (machine_is_integrator()) { + if (!is_cp) { rtc_device.periphid = 0x00041030; uart0_device.periphid = 0x00041010; uart1_device.periphid = 0x00041010; @@ -86,7 +87,7 @@ static int __init integrator_init(void) return 0; } -arch_initcall(integrator_init); +#endif /* * On the Integrator platform, the port RTS and DTR are provided by @@ -95,17 +96,20 @@ arch_initcall(integrator_init); * UART0 7 6 * UART1 5 4 */ -#define SC_CTRLC IO_ADDRESS(INTEGRATOR_SC_CTRLC) -#define SC_CTRLS IO_ADDRESS(INTEGRATOR_SC_CTRLS) +#define SC_CTRLC __io_address(INTEGRATOR_SC_CTRLC) +#define SC_CTRLS __io_address(INTEGRATOR_SC_CTRLS) static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) { unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; + u32 phybase = dev->res.start; - if (dev == &uart0_device) { + if (phybase == INTEGRATOR_UART0_BASE) { + /* UART0 */ rts_mask = 1 << 4; dtr_mask = 1 << 5; } else { + /* UART1 */ rts_mask = 1 << 6; dtr_mask = 1 << 7; } @@ -124,12 +128,10 @@ static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *bas __raw_writel(ctrlc, SC_CTRLC); } -static struct amba_pl010_data integrator_uart_data = { +struct amba_pl010_data integrator_uart_data = { .set_mctrl = integrator_uart_set_mctrl, }; -#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL) - static DEFINE_RAW_SPINLOCK(cm_lock); /** diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c index fbb4577798954717775016c34c9aa49b734c17fe..590c192cdf4d43f58e6eafc7670048f2ea2247fe 100644 --- a/arch/arm/mach-integrator/cpu.c +++ b/arch/arm/mach-integrator/cpu.c @@ -25,10 +25,10 @@ static struct cpufreq_driver integrator_driver; -#define CM_ID IO_ADDRESS(INTEGRATOR_HDR_ID) -#define CM_OSC IO_ADDRESS(INTEGRATOR_HDR_OSC) -#define CM_STAT IO_ADDRESS(INTEGRATOR_HDR_STAT) -#define CM_LOCK IO_ADDRESS(INTEGRATOR_HDR_LOCK) +#define CM_ID __io_address(INTEGRATOR_HDR_ID) +#define CM_OSC __io_address(INTEGRATOR_HDR_OSC) +#define CM_STAT __io_address(INTEGRATOR_HDR_STAT) +#define CM_LOCK __io_address(INTEGRATOR_HDR_LOCK) static const struct icst_params lclk_params = { .ref = 24000000, diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h index 445d57adb043afa2a23c681f9cdfda610b6bb7cd..1a78692e32a4bc5d42432180ff67f75a885ce084 100644 --- a/arch/arm/mach-integrator/include/mach/cm.h +++ b/arch/arm/mach-integrator/include/mach/cm.h @@ -3,6 +3,8 @@ */ void cm_control(u32, u32); +#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL) + #define CM_CTRL_LED (1 << 0) #define CM_CTRL_nMBDET (1 << 1) #define CM_CTRL_REMAP (1 << 2) diff --git a/arch/arm/mach-integrator/include/mach/io.h b/arch/arm/mach-integrator/include/mach/io.h deleted file mode 100644 index 8de70de3dd0a3fd57b3de3aa2ee0a862098eb916..0000000000000000000000000000000000000000 --- a/arch/arm/mach-integrator/include/mach/io.h +++ /dev/null @@ -1,33 +0,0 @@ -/* - * arch/arm/mach-integrator/include/mach/io.h - * - * Copyright (C) 1999 ARM Limited - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ -#ifndef __ASM_ARM_ARCH_IO_H -#define __ASM_ARM_ARCH_IO_H - -/* - * WARNING: this has to mirror definitions in platform.h - */ -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 -#define PCI_IO_VADDR 0xee000000 - -#define __io(a) ((void __iomem *)(PCI_IO_VADDR + (a))) - -#endif diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index ec467baade097c5ebcadc1699a879e7758b2874a..4c034752685152a84ad80b6b64cea298317984fc 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -324,6 +324,10 @@ */ #define PHYS_PCI_V3_BASE 0x62000000 +#define PCI_MEMORY_VADDR 0xe8000000 +#define PCI_CONFIG_VADDR 0xec000000 +#define PCI_V3_VADDR 0xed000000 + /* ------------------------------------------------------------------------ * Integrator Interrupt Controllers * ------------------------------------------------------------------------ diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 3b2267529f5e308cc1c47c048375ffedd5a60f9a..d5b5435a09aed30896817ce1930c1af6ab4aa88a 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -34,6 +34,9 @@ #include #include #include +#include +#include +#include #include