Commit fc284d63 authored by Jiri Kosina's avatar Jiri Kosina
Browse files

Merge branch 'from-rusty/modules-next' into for-4.5/core 



As agreed with Rusty, we're taking a current module-next pile through
livepatching.git, as it contains solely patches that are pre-requisity
for module page protection cleanups in livepatching. Rusty will be
restarting module-next from scratch.

Signed-off-by: default avatarJiri Kosina <jkosina@suse.cz>
parents 444f9e99 e0224418

Documentation/IPMI.txt

+5 −2
Original line number Diff line number Diff line
@@ -587,7 +587,7 @@ used to control it: 


  modprobe ipmi_watchdog timeout=<t> pretimeout=<t> action=<action type>

      preaction=<preaction type> preop=<preop type> start_now=x

      nowayout=x ifnum_to_use=n

      nowayout=x ifnum_to_use=n panic_wdt_timeout=<t>



ifnum_to_use specifies which interface the watchdog timer should use.

The default is -1, which means to pick the first one registered.
@@ -597,7 +597,9 @@ is the amount of seconds before the reset that the pre-timeout panic will 
occur (if pretimeout is zero, then pretimeout will not be enabled).  Note

that the pretimeout is the time before the final timeout.  So if the

timeout is 50 seconds and the pretimeout is 10 seconds, then the pretimeout

will occur in 40 second (10 seconds before the timeout).

will occur in 40 second (10 seconds before the timeout). The panic_wdt_timeout

is the value of timeout which is set on kernel panic, in order to let actions

such as kdump to occur during panic.



The action may be "reset", "power_cycle", or "power_off", and

specifies what to do when the timer times out, and defaults to
@@ -634,6 +636,7 @@ for configuring the watchdog: 
	ipmi_watchdog.preop=<preop type>

	ipmi_watchdog.start_now=x

	ipmi_watchdog.nowayout=x

	ipmi_watchdog.panic_wdt_timeout=<t>



The options are the same as the module parameter options.

Documentation/block/null_blk.txt

+3 −0
Original line number Diff line number Diff line
@@ -70,3 +70,6 @@ use_per_node_hctx=[0/1]: Default: 0 
     parameter.

  1: The multi-queue block layer is instantiated with a hardware dispatch

     queue for each CPU node in the system.



use_lightnvm=[0/1]: Default: 0

  Register device with LightNVM. Requires blk-mq to be used.

Documentation/i2c/busses/i2c-i801

+1 −0
Original line number Diff line number Diff line
@@ -32,6 +32,7 @@ Supported adapters: 
  * Intel Sunrise Point-LP (PCH)

  * Intel DNV (SOC)

  * Intel Broxton (SOC)

  * Intel Lewisburg (PCH)

   Datasheets: Publicly available at the Intel website



On Intel Patsburg and later chipsets, both the normal host SMBus controller

Documentation/kernel-parameters.txt

+0 −3
Original line number Diff line number Diff line
@@ -1583,9 +1583,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. 
		hwp_only

			Only load intel_pstate on systems which support

			hardware P state control (HWP) if available.

		no_acpi

			Don't use ACPI processor performance control objects

			_PSS and _PPC specified limits.



	intremap=	[X86-64, Intel-IOMMU]

			on	enable Interrupt Remapping (default)

MAINTAINERS

+17 −2
Original line number Diff line number Diff line
@@ -2449,7 +2449,9 @@ F: drivers/firmware/broadcom/* 


BROADCOM STB NAND FLASH DRIVER

M:	Brian Norris <computersforpeace@gmail.com>

M:	Kamal Dasu <kdasu.kdev@gmail.com>

L:	linux-mtd@lists.infradead.org

L:	bcm-kernel-feedback-list@broadcom.com

S:	Maintained

F:	drivers/mtd/nand/brcmnand/
@@ -2929,10 +2931,9 @@ S: Maintained 
F:	drivers/platform/x86/compal-laptop.c



CONEXANT ACCESSRUNNER USB DRIVER

M:	Simon Arlott <cxacru@fire.lp0.eu>

L:	accessrunner-general@lists.sourceforge.net

W:	http://accessrunner.sourceforge.net/

S:	Maintained

S:	Orphan

F:	drivers/usb/atm/cxacru.c



CONFIGFS
@@ -4409,6 +4410,7 @@ K: fmc_d.*register 


FPGA MANAGER FRAMEWORK

M:	Alan Tull <atull@opensource.altera.com>

R:	Moritz Fischer <moritz.fischer@ettus.com>

S:	Maintained

F:	drivers/fpga/

F:	include/linux/fpga/fpga-mgr.h
@@ -6364,6 +6366,7 @@ F: arch/*/include/asm/pmem.h 
LIGHTNVM PLATFORM SUPPORT

M:	Matias Bjorling <mb@lightnvm.io>

W:	http://github/OpenChannelSSD

L:	linux-block@vger.kernel.org

S:	Maintained

F:	drivers/lightnvm/

F:	include/linux/lightnvm.h
@@ -7902,6 +7905,18 @@ S: Maintained 
F:	net/openvswitch/

F:	include/uapi/linux/openvswitch.h



OPERATING PERFORMANCE POINTS (OPP)

M:	Viresh Kumar <vireshk@kernel.org>

M:	Nishanth Menon <nm@ti.com>

M:	Stephen Boyd <sboyd@codeaurora.org>

L:	linux-pm@vger.kernel.org

S:	Maintained

T:	git git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git

F:	drivers/base/power/opp/

F:	include/linux/pm_opp.h

F:	Documentation/power/opp.txt

F:	Documentation/devicetree/bindings/opp/



OPL4 DRIVER

M:	Clemens Ladisch <clemens@ladisch.de>

L:	alsa-devel@alsa-project.org (moderated for non-subscribers)