From b755706cd726e5d465c28c2cd64c618419034981 Mon Sep 17 00:00:00 2001 From: Benoit Cousson Date: Wed, 7 Dec 2011 11:47:40 -0800 Subject: [PATCH 0001/1359] ARM: OMAP2+: board-generic: Add missing handle_irq callbacks The following commit: 6b2f55d7851aa358d3a99cff344c560c4967f042, is adding the support for the CONFIG_MULTI_IRQ_HANDLER but did not update all the machine descriptors supported in the DT board-generic.c file. It thus break the DT boot on OMAP3 and OMAP4 boards. Add the proper handle_irq callbacks for OMAP3 and OMAP4 generic machine descriptors. Signed-off-by: Benoit Cousson Acked-by: Marc Zyngier Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/board-generic.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 63b54163b993..e493877957c9 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -17,6 +17,7 @@ #include #include +#include #include #include @@ -103,6 +104,7 @@ DT_MACHINE_START(OMAP242X_DT, "Generic OMAP2420 (Flattened Device Tree)") .map_io = omap242x_map_io, .init_early = omap2420_init_early, .init_irq = omap2_init_irq, + .handle_irq = omap2_intc_handle_irq, .init_machine = omap_generic_init, .timer = &omap2_timer, .dt_compat = omap242x_boards_compat, @@ -140,6 +142,7 @@ DT_MACHINE_START(OMAP3_DT, "Generic OMAP3 (Flattened Device Tree)") .map_io = omap3_map_io, .init_early = omap3430_init_early, .init_irq = omap3_init_irq, + .handle_irq = omap3_intc_handle_irq, .init_machine = omap3_init, .timer = &omap3_timer, .dt_compat = omap3_boards_compat, @@ -158,6 +161,7 @@ DT_MACHINE_START(OMAP4_DT, "Generic OMAP4 (Flattened Device Tree)") .map_io = omap4_map_io, .init_early = omap4430_init_early, .init_irq = gic_init_irq, + .handle_irq = gic_handle_irq, .init_machine = omap4_init, .timer = &omap4_timer, .dt_compat = omap4_boards_compat, -- GitLab From 23bd15ec662344dc10e9918fdd0dbc58bc71526d Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Wed, 14 Dec 2011 21:10:06 -0200 Subject: [PATCH 0002/1359] drm/i915: Fix TV Out refresh rate. TV Out refresh rate was half of the specification for almost all modes. Due to this reason pixel clock was so low for some modes causing flickering screen. Signed-off-by: Rodrigo Vivi Reviewed-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_tv.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index f3c6a9a8b081..2b1fcadbc5ce 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -417,7 +417,7 @@ static const struct tv_mode tv_modes[] = { { .name = "NTSC-M", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 3.580MHz */ @@ -460,7 +460,7 @@ static const struct tv_mode tv_modes[] = { { .name = "NTSC-443", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, /* 525 Lines, 60 Fields, 15.734KHz line, Sub-Carrier 4.43MHz */ @@ -502,7 +502,7 @@ static const struct tv_mode tv_modes[] = { { .name = "NTSC-J", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -545,7 +545,7 @@ static const struct tv_mode tv_modes[] = { { .name = "PAL-M", .clock = 108000, - .refresh = 29970, + .refresh = 59940, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -589,7 +589,7 @@ static const struct tv_mode tv_modes[] = { /* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */ .name = "PAL-N", .clock = 108000, - .refresh = 25000, + .refresh = 50000, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -634,7 +634,7 @@ static const struct tv_mode tv_modes[] = { /* 625 Lines, 50 Fields, 15.625KHz line, Sub-Carrier 4.434MHz */ .name = "PAL", .clock = 108000, - .refresh = 25000, + .refresh = 50000, .oversample = TV_OVERSAMPLE_8X, .component_only = 0, @@ -821,7 +821,7 @@ static const struct tv_mode tv_modes[] = { { .name = "1080i@50Hz", .clock = 148800, - .refresh = 25000, + .refresh = 50000, .oversample = TV_OVERSAMPLE_2X, .component_only = 1, @@ -847,7 +847,7 @@ static const struct tv_mode tv_modes[] = { { .name = "1080i@60Hz", .clock = 148800, - .refresh = 30000, + .refresh = 60000, .oversample = TV_OVERSAMPLE_2X, .component_only = 1, -- GitLab From 55a6713b3f30a5024056027e9dbf03ac8f13bfc9 Mon Sep 17 00:00:00 2001 From: Rodrigo Vivi Date: Thu, 15 Dec 2011 14:47:33 -0200 Subject: [PATCH 0003/1359] drm/i915: Removing TV Out modes. These modes are no longer needed or are not according to TV timing standards. Intel PRM Vol 3 - Display Registers Updated - Section 5 TV-Out Programming / 5.2.1 Television Standards / 5.2.1.1 Timing tables Signed-off-by: Rodrigo Vivi Reviewed-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_tv.c | 122 -------------------------------- 1 file changed, 122 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_tv.c b/drivers/gpu/drm/i915/intel_tv.c index 2b1fcadbc5ce..1571be37ce3e 100644 --- a/drivers/gpu/drm/i915/intel_tv.c +++ b/drivers/gpu/drm/i915/intel_tv.c @@ -673,78 +673,6 @@ static const struct tv_mode tv_modes[] = { .filter_table = filter_table, }, - { - .name = "480p@59.94Hz", - .clock = 107520, - .refresh = 59940, - .oversample = TV_OVERSAMPLE_4X, - .component_only = 1, - - .hsync_end = 64, .hblank_end = 122, - .hblank_start = 842, .htotal = 857, - - .progressive = true, .trilevel_sync = false, - - .vsync_start_f1 = 12, .vsync_start_f2 = 12, - .vsync_len = 12, - - .veq_ena = false, - - .vi_end_f1 = 44, .vi_end_f2 = 44, - .nbr_end = 479, - - .burst_ena = false, - - .filter_table = filter_table, - }, - { - .name = "480p@60Hz", - .clock = 107520, - .refresh = 60000, - .oversample = TV_OVERSAMPLE_4X, - .component_only = 1, - - .hsync_end = 64, .hblank_end = 122, - .hblank_start = 842, .htotal = 856, - - .progressive = true, .trilevel_sync = false, - - .vsync_start_f1 = 12, .vsync_start_f2 = 12, - .vsync_len = 12, - - .veq_ena = false, - - .vi_end_f1 = 44, .vi_end_f2 = 44, - .nbr_end = 479, - - .burst_ena = false, - - .filter_table = filter_table, - }, - { - .name = "576p", - .clock = 107520, - .refresh = 50000, - .oversample = TV_OVERSAMPLE_4X, - .component_only = 1, - - .hsync_end = 64, .hblank_end = 139, - .hblank_start = 859, .htotal = 863, - - .progressive = true, .trilevel_sync = false, - - .vsync_start_f1 = 10, .vsync_start_f2 = 10, - .vsync_len = 10, - - .veq_ena = false, - - .vi_end_f1 = 48, .vi_end_f2 = 48, - .nbr_end = 575, - - .burst_ena = false, - - .filter_table = filter_table, - }, { .name = "720p@60Hz", .clock = 148800, @@ -769,30 +697,6 @@ static const struct tv_mode tv_modes[] = { .filter_table = filter_table, }, - { - .name = "720p@59.94Hz", - .clock = 148800, - .refresh = 59940, - .oversample = TV_OVERSAMPLE_2X, - .component_only = 1, - - .hsync_end = 80, .hblank_end = 300, - .hblank_start = 1580, .htotal = 1651, - - .progressive = true, .trilevel_sync = true, - - .vsync_start_f1 = 10, .vsync_start_f2 = 10, - .vsync_len = 10, - - .veq_ena = false, - - .vi_end_f1 = 29, .vi_end_f2 = 29, - .nbr_end = 719, - - .burst_ena = false, - - .filter_table = filter_table, - }, { .name = "720p@50Hz", .clock = 148800, @@ -868,32 +772,6 @@ static const struct tv_mode tv_modes[] = { .burst_ena = false, - .filter_table = filter_table, - }, - { - .name = "1080i@59.94Hz", - .clock = 148800, - .refresh = 29970, - .oversample = TV_OVERSAMPLE_2X, - .component_only = 1, - - .hsync_end = 88, .hblank_end = 235, - .hblank_start = 2155, .htotal = 2201, - - .progressive = false, .trilevel_sync = true, - - .vsync_start_f1 = 4, .vsync_start_f2 = 5, - .vsync_len = 10, - - .veq_ena = true, .veq_start_f1 = 4, - .veq_start_f2 = 4, .veq_len = 10, - - - .vi_end_f1 = 21, .vi_end_f2 = 22, - .nbr_end = 539, - - .burst_ena = false, - .filter_table = filter_table, }, }; -- GitLab From ba68e086223a5f149f37bf8692c8cdbf1b0ba3ef Mon Sep 17 00:00:00 2001 From: Paulo Zanoni Date: Fri, 6 Jan 2012 19:45:34 -0200 Subject: [PATCH 0004/1359] drm/i915/sdvo: always set positive sync polarity This is a revert of 81a14b46846fea0741902e8d8dfcc6c6c78154c8. We already set the mode polarity using the SDVO commands with struct intel_sdvo_dtd. We have at least 3 bugs that get fixed with this patch. The documentation, despite not clear, can also be interpreted in a way that suggests this patch is needed. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=15766 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42174 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=43333 Cc: stable@kernel.org Reviewed-by: Eric Anholt Reviewed-by: Jesse Barnes Signed-off-by: Paulo Zanoni Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_sdvo.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index f7b9268df266..e334ec33a47d 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -1066,15 +1066,13 @@ static void intel_sdvo_mode_set(struct drm_encoder *encoder, /* Set the SDVO control regs. */ if (INTEL_INFO(dev)->gen >= 4) { - sdvox = 0; + /* The real mode polarity is set by the SDVO commands, using + * struct intel_sdvo_dtd. */ + sdvox = SDVO_VSYNC_ACTIVE_HIGH | SDVO_HSYNC_ACTIVE_HIGH; if (intel_sdvo->is_hdmi) sdvox |= intel_sdvo->color_range; if (INTEL_INFO(dev)->gen < 5) sdvox |= SDVO_BORDER_ENABLE; - if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC) - sdvox |= SDVO_VSYNC_ACTIVE_HIGH; - if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC) - sdvox |= SDVO_HSYNC_ACTIVE_HIGH; } else { sdvox = I915_READ(intel_sdvo->sdvo_reg); switch (intel_sdvo->sdvo_reg) { -- GitLab From a05a586239c66a256ea1fbae859e742e4c91c8d9 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Tue, 20 Dec 2011 08:54:15 -0800 Subject: [PATCH 0005/1359] drm/i915: Print debugfs object list sizes in KiB instead of bytes. They're all in increments of pages, so this just makes it easier on the eyes. Signed-off-by: Eric Anholt Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 11807989f918..f8b8ed22b4dc 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -121,11 +121,11 @@ static const char *cache_level_str(int type) static void describe_obj(struct seq_file *m, struct drm_i915_gem_object *obj) { - seq_printf(m, "%p: %s%s %8zd %04x %04x %d %d%s%s%s", + seq_printf(m, "%p: %s%s %8zdKiB %04x %04x %d %d%s%s%s", &obj->base, get_pin_flag(obj), get_tiling_flag(obj), - obj->base.size, + obj->base.size / 1024, obj->base.read_domains, obj->base.write_domain, obj->last_rendering_seqno, -- GitLab From 5e5b7fa2ad84f7806d0c7f5af8e1440bc91b4ec7 Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Sat, 7 Jan 2012 23:40:34 -0200 Subject: [PATCH 0006/1359] drm/i915: simplify pipe checking This is also handled by i915_reg.h, so just reuse this trick to reduce universe entropy. Signed-off-by: Eugeni Dodonov Reviewed-by: Jesse Barnes Reviewed-by: Cyril Brulebois Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_suspend.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 7886e4fb60e3..c0b945cdcd9a 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -28,6 +28,7 @@ #include "drm.h" #include "i915_drm.h" #include "intel_drv.h" +#include "i915_reg.h" static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) { @@ -35,7 +36,7 @@ static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) u32 dpll_reg; if (HAS_PCH_SPLIT(dev)) - dpll_reg = (pipe == PIPE_A) ? _PCH_DPLL_A : _PCH_DPLL_B; + dpll_reg = PCH_DPLL(pipe); else dpll_reg = (pipe == PIPE_A) ? _DPLL_A : _DPLL_B; -- GitLab From 07c1e8c1462fa7324de4c36ae9e55da2abd79cee Mon Sep 17 00:00:00 2001 From: Eugeni Dodonov Date: Sat, 7 Jan 2012 23:40:35 -0200 Subject: [PATCH 0007/1359] drm/i915: handle 3rd pipe We don't need to check 3rd pipe specifically, as it shares PLL with some other one. Signed-off-by: Eugeni Dodonov Reviewed-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_suspend.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index c0b945cdcd9a..30d924f447c0 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -35,6 +35,10 @@ static bool i915_pipe_enabled(struct drm_device *dev, enum pipe pipe) struct drm_i915_private *dev_priv = dev->dev_private; u32 dpll_reg; + /* On IVB, 3rd pipe shares PLL with another one */ + if (pipe > 1) + return false; + if (HAS_PCH_SPLIT(dev)) dpll_reg = PCH_DPLL(pipe); else -- GitLab From d0cd5d482b8a6dc92c6c69a5387baf72ea84f23a Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Mon, 14 Nov 2011 17:51:39 -0800 Subject: [PATCH 0008/1359] xhci: Fix USB 3.0 device restart on resume. The xHCI hub port code gets passed a zero-based port number by the USB core. It then adds one to in order to find a device slot by port number and device speed by calling xhci_find_slot_id_by_port. That function clearly states it requires a one-based port number. The xHCI port status change event handler was using a zero-based port number that it got from find_faked_portnum_from_hw_portnum, not a one-based port number. This lead to the doorbells never being rung for a device after a resume, or worse, a different device with the same speed having its doorbell rung (which could lead to bad power management in the xHCI host controller). This patch should be backported to kernels as old as 2.6.39. Signed-off-by: Sarah Sharp Acked-by: Andiry Xu Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-ring.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index b90e1386418b..5a818cbbab44 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1204,6 +1204,7 @@ static void handle_vendor_event(struct xhci_hcd *xhci, * * Returns a zero-based port number, which is suitable for indexing into each of * the split roothubs' port arrays and bus state arrays. + * Add one to it in order to call xhci_find_slot_id_by_port. */ static unsigned int find_faked_portnum_from_hw_portnum(struct usb_hcd *hcd, struct xhci_hcd *xhci, u32 port_id) @@ -1324,7 +1325,7 @@ static void handle_port_status(struct xhci_hcd *xhci, xhci_set_link_state(xhci, port_array, faked_port_index, XDEV_U0); slot_id = xhci_find_slot_id_by_port(hcd, xhci, - faked_port_index); + faked_port_index + 1); if (!slot_id) { xhci_dbg(xhci, "slot_id is zero\n"); goto cleanup; -- GitLab From e51e07e0ac7e3ff847d640f41b7527db04d4a4e7 Mon Sep 17 00:00:00 2001 From: Tkhai Kirill Date: Tue, 10 Jan 2012 13:17:03 +0000 Subject: [PATCH 0009/1359] sparc32: forced setting of mode of sun4m per-cpu timers SUN4M per-cpu timers have two modes of work. These are timer mode and counter mode. Kernel doesn't write anything to the register, which is connected with mode choice. So, the mode is chosen by bootloader. This patch forces to use timer mode from the kernel and to be independent of bootloader. I had this problem with OpenBIOS. Timers don't tick and kernel fails on QEMU, when it's compiled with SMP support. The patch fixes problem. Signed-off-by: Tkhai Kirill Acked-by: Sam Ravnborg Signed-off-by: David S. Miller --- arch/sparc/kernel/sun4m_irq.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/arch/sparc/kernel/sun4m_irq.c b/arch/sparc/kernel/sun4m_irq.c index 422c16dad1f6..e61165161dd3 100644 --- a/arch/sparc/kernel/sun4m_irq.c +++ b/arch/sparc/kernel/sun4m_irq.c @@ -399,6 +399,9 @@ static void __init sun4m_init_timers(irq_handler_t counter_fn) timers_global = (void __iomem *) (unsigned long) addr[num_cpu_timers]; + /* Every per-cpu timer works in timer mode */ + sbus_writel(0x00000000, &timers_global->timer_config); + sbus_writel((((1000000/HZ) + 1) << 10), &timers_global->l10_limit); master_l10_counter = &timers_global->l10_count; -- GitLab From 12183a20a8baf009bf570ab3db45a27fd6b1fd03 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 21 Dec 2011 23:01:20 +0100 Subject: [PATCH 0010/1359] mtd: nand: fix typo in comment Funny one :) "Heck" fits somehow, too, but I am sure it was meant to be "Check". Signed-off-by: Wolfram Sang Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/nand/nand_base.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 35b4565050f1..8a393f9e6027 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2588,7 +2588,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, instr->state = MTD_ERASING; while (len) { - /* Heck if we have a bad block, we do not erase bad blocks! */ + /* Check if we have a bad block, we do not erase bad blocks! */ if (nand_block_checkbad(mtd, ((loff_t) page) << chip->page_shift, 0, allowbbt)) { pr_warn("%s: attempt to erase a bad block at page 0x%08x\n", -- GitLab From 9398d1ce09b9009996f7d2468e1d3c785fa6feda Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 4 Jan 2012 11:18:46 +0800 Subject: [PATCH 0011/1359] mtd: gpmi-nand bugfix: reset the BCH module when it is not MX23 In MX28, if we do not reset the BCH module. The BCH module may becomes unstable when the board reboots for several thousands times. This bug has been catched in customer's production. The patch adds some comments (some from Wolfram Sang), and fixes it now. Also change gpmi_reset_block() to static. Signed-off-by: Huang Shijie Acked-by: Marek Vasut Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Cc: stable@kernel.org [3.1+] --- drivers/mtd/nand/gpmi-nand/gpmi-lib.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 2a56fc6f399a..c56f8e021b90 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -69,17 +69,19 @@ static int clear_poll_bit(void __iomem *addr, u32 mask) * [1] enable the module. * [2] reset the module. * - * In most of the cases, it's ok. But there is a hardware bug in the BCH block. + * In most of the cases, it's ok. + * But in MX23, there is a hardware bug in the BCH block (see erratum #2847). * If you try to soft reset the BCH block, it becomes unusable until * the next hard reset. This case occurs in the NAND boot mode. When the board * boots by NAND, the ROM of the chip will initialize the BCH blocks itself. * So If the driver tries to reset the BCH again, the BCH will not work anymore. - * You will see a DMA timeout in this case. + * You will see a DMA timeout in this case. The bug has been fixed + * in the following chips, such as MX28. * * To avoid this bug, just add a new parameter `just_enable` for * the mxs_reset_block(), and rewrite it here. */ -int gpmi_reset_block(void __iomem *reset_addr, bool just_enable) +static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable) { int ret; int timeout = 0x400; @@ -206,7 +208,15 @@ int bch_set_geometry(struct gpmi_nand_data *this) if (ret) goto err_out; - ret = gpmi_reset_block(r->bch_regs, true); + /* + * Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this + * chip, otherwise it will lock up. So we skip resetting BCH on the MX23. + * On the other hand, the MX28 needs the reset, because one case has been + * seen where the BCH produced ECC errors constantly after 10000 + * consecutive reboots. The latter case has not been seen on the MX23 yet, + * still we don't know if it could happen there as well. + */ + ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this)); if (ret) goto err_out; -- GitLab From bce41d601e58af12cee1398fe836e6b9a8fb5396 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 10 Jan 2012 15:32:29 +0200 Subject: [PATCH 0012/1359] jffs2: do not initialize variable unnecessarily Remove unnecessary initializer for a local variable. Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- fs/jffs2/erase.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c index a01cdad6aad1..eafb8d37a6fb 100644 --- a/fs/jffs2/erase.c +++ b/fs/jffs2/erase.c @@ -335,7 +335,7 @@ static int jffs2_block_check_erase(struct jffs2_sb_info *c, struct jffs2_erasebl void *ebuf; uint32_t ofs; size_t retlen; - int ret = -EIO; + int ret; unsigned long *wordebuf; ret = mtd_point(c->mtd, jeb->offset, c->sector_size, &retlen, -- GitLab From 8ca4013d702dae4913fbb625aabf4c2966cdf1f0 Mon Sep 17 00:00:00 2001 From: Duncan Laurie Date: Tue, 25 Oct 2011 15:42:21 -0700 Subject: [PATCH 0013/1359] CHROMIUM: i915: Add DMI override to skip CRT initialization on ZGB This is the method used to override LVDS in intel_lvds and appears to be an effective way to ensure that the driver does not enable VGA hotplug. This is the same patch from 2.6.32 kernel in R12 but ported to 2.6.38, will send upstream next. Signed-off-by: Duncan Laurie BUG=chrome-os-partner:117 TEST=Check PORT_HOTPLUG_EN to see if hotplug interrupt is disabled. Run the following command as root, specifically looking at bit 9: mmio_read32 $[$(pci_read32 0 2 0 0x10) + 0x61110] = 0x00000000 Change-Id: Id8240f9fb31d058d8d79ee72f7b4615c43893f5a Reviewed-on: http://gerrit.chromium.org/gerrit/1390 Reviewed-by: Olof Johansson Tested-by: Duncan Laurie Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_crt.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c index fee0ad02c6d0..dd729d46a61f 100644 --- a/drivers/gpu/drm/i915/intel_crt.c +++ b/drivers/gpu/drm/i915/intel_crt.c @@ -24,6 +24,7 @@ * Eric Anholt */ +#include #include #include #include "drmP.h" @@ -540,6 +541,24 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = { .destroy = intel_encoder_destroy, }; +static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id) +{ + DRM_DEBUG_KMS("Skipping CRT initialization for %s\n", id->ident); + return 1; +} + +static const struct dmi_system_id intel_no_crt[] = { + { + .callback = intel_no_crt_dmi_callback, + .ident = "ACER ZGB", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ACER"), + DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"), + }, + }, + { } +}; + void intel_crt_init(struct drm_device *dev) { struct drm_connector *connector; @@ -547,6 +566,10 @@ void intel_crt_init(struct drm_device *dev) struct intel_connector *intel_connector; struct drm_i915_private *dev_priv = dev->dev_private; + /* Skip machines without VGA that falsely report hotplug events */ + if (dmi_check_system(intel_no_crt)) + return; + crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL); if (!crt) return; -- GitLab From 44306ab302687b519a31aa498b954c1e26f95a6b Mon Sep 17 00:00:00 2001 From: Joel Sass Date: Tue, 10 Jan 2012 13:03:55 -0500 Subject: [PATCH 0014/1359] drm/i915: Add Clientron E830 to the ignore LVDS list Signed-off-by: Joel Sass Reviewed-by: Adam Jackson Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_lvds.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index e44191132ac4..798f6e1aa544 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -708,6 +708,14 @@ static const struct dmi_system_id intel_no_lvds[] = { }, }, { + .callback = intel_no_lvds_dmi_callback, + .ident = "Clientron E830", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Clientron"), + DMI_MATCH(DMI_PRODUCT_NAME, "E830"), + }, + }, + { .callback = intel_no_lvds_dmi_callback, .ident = "Asus EeeBox PC EB1007", .matches = { -- GitLab From 7885d2052bd94395e337709cfba093a41f273ff1 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 12 Jan 2012 14:51:17 -0800 Subject: [PATCH 0015/1359] drm/i915: mask transcoder select bits before setting them on LVDS The transcoder port may changed from mode set to mode set, so make sure to mask out the selection bits before setting the right ones or we'll get black screens when going from transcoder B to A. Tested-by: Vincent Vanackere Signed-off-by: Jesse Barnes Reviewed-by: Keith Packard Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2a3f707caab8..96cea08b10ce 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5808,12 +5808,15 @@ static int ironlake_crtc_mode_set(struct drm_crtc *crtc, if (is_lvds) { temp = I915_READ(PCH_LVDS); temp |= LVDS_PORT_EN | LVDS_A0A2_CLKA_POWER_UP; - if (HAS_PCH_CPT(dev)) + if (HAS_PCH_CPT(dev)) { + temp &= ~PORT_TRANS_SEL_MASK; temp |= PORT_TRANS_SEL_CPT(pipe); - else if (pipe == 1) - temp |= LVDS_PIPEB_SELECT; - else - temp &= ~LVDS_PIPEB_SELECT; + } else { + if (pipe == 1) + temp |= LVDS_PIPEB_SELECT; + else + temp &= ~LVDS_PIPEB_SELECT; + } /* set the corresponsding LVDS_BORDER bit */ temp |= dev_priv->lvds_border_bits; -- GitLab From bfe75c7e67e5f32bf446a48e0502d06d25b51752 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 13 Jan 2012 16:27:38 +0900 Subject: [PATCH 0016/1359] sh: Defer to asm-generic/device.h. Now that the hwblk use cases have been ripped out, we can revert to asm-generic/device.h for the device/platform device arch data structures. Signed-off-by: Paul Mundt --- arch/sh/include/asm/device.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/sh/include/asm/device.h b/arch/sh/include/asm/device.h index a1c9c0daec10..071bcb4d4bfd 100644 --- a/arch/sh/include/asm/device.h +++ b/arch/sh/include/asm/device.h @@ -3,9 +3,10 @@ * * This file is released under the GPLv2 */ +#ifndef __ASM_SH_DEVICE_H +#define __ASM_SH_DEVICE_H -struct dev_archdata { -}; +#include struct platform_device; /* allocate contiguous memory chunk and fill in struct resource */ @@ -14,5 +15,4 @@ int platform_resource_setup_memory(struct platform_device *pdev, void plat_early_device_setup(void); -struct pdev_archdata { -}; +#endif /* __ASM_SH_DEVICE_H */ -- GitLab From 6d7120a713300283a8b73e7d86cd1bab8b9d1971 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 13 Jan 2012 16:42:50 +0900 Subject: [PATCH 0017/1359] video: pvr2fb: Fix up spurious section mismatch warnings. pvr2fb special cases its init/exit routines which causes spurious section mismatches. Set the board_driver array __refdata to silence them. Signed-off-by: Paul Mundt --- drivers/video/pvr2fb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/video/pvr2fb.c b/drivers/video/pvr2fb.c index f9975100d56d..3a3fdc62c75b 100644 --- a/drivers/video/pvr2fb.c +++ b/drivers/video/pvr2fb.c @@ -1061,7 +1061,7 @@ static struct pvr2_board { int (*init)(void); void (*exit)(void); char name[16]; -} board_driver[] = { +} board_driver[] __refdata = { #ifdef CONFIG_SH_DREAMCAST { pvr2fb_dc_init, pvr2fb_dc_exit, "Sega DC PVR2" }, #endif -- GitLab From 96c0a2f52c45d8ec0a2b70810f4693530feaba5d Mon Sep 17 00:00:00 2001 From: Rohit Jain Date: Thu, 12 Jan 2012 12:19:44 +0530 Subject: [PATCH 0018/1359] drm/i915: VBT Parser cleanup for eDP block Support for parsing parameters for S3D support and T3 optimization support is implemented. The order for the bdb_edp struct was also made similar to that indicated in spec. Signed-off-by: Rohit Jain Reviewed-by: Shobhit Kumar Reviewed-by: Vijay A. Purushothaman Reviewed-by: Eugeni Dodonov Acked-by: Jesse Barnes Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_bios.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/intel_bios.h b/drivers/gpu/drm/i915/intel_bios.h index 8af3735e27c6..dbda6e3bdf07 100644 --- a/drivers/gpu/drm/i915/intel_bios.h +++ b/drivers/gpu/drm/i915/intel_bios.h @@ -467,8 +467,12 @@ struct edp_link_params { struct bdb_edp { struct edp_power_seq power_seqs[16]; u32 color_depth; - u32 sdrrs_msa_timing_delay; struct edp_link_params link_params[16]; + u32 sdrrs_msa_timing_delay; + + /* ith bit indicates enabled/disabled for (i+1)th panel */ + u16 edp_s3d_feature; + u16 edp_t3_optimization; } __attribute__ ((packed)); void intel_setup_bios(struct drm_device *dev); -- GitLab From 00c2064b7766c4e24af42e21da1903aedc8ca4c0 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 13 Jan 2012 15:48:39 -0800 Subject: [PATCH 0019/1359] drm/i915: sprite init failure on pre-SNB is not a failure We can call the plane init function unconditionally, but don't need to complain if it fails, since that will only happen if we're out of memory (and other things will fail) or if we're on the wrong platform (which is ok). And remove the DRM_ERRORs from the sprite code itself to avoid dmesg spam. Signed-off-by: Jesse Barnes Reviewed-by: Keith Packard Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_display.c | 9 +++------ drivers/gpu/drm/i915/intel_sprite.c | 8 ++------ 2 files changed, 5 insertions(+), 12 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 96cea08b10ce..b3b51c43dad0 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -9028,12 +9028,9 @@ void intel_modeset_init(struct drm_device *dev) for (i = 0; i < dev_priv->num_pipe; i++) { intel_crtc_init(dev, i); - if (HAS_PCH_SPLIT(dev)) { - ret = intel_plane_init(dev, i); - if (ret) - DRM_ERROR("plane %d init failed: %d\n", - i, ret); - } + ret = intel_plane_init(dev, i); + if (ret) + DRM_DEBUG_KMS("plane %d init failed: %d\n", i, ret); } /* Just disable it once at startup */ diff --git a/drivers/gpu/drm/i915/intel_sprite.c b/drivers/gpu/drm/i915/intel_sprite.c index d13989fda501..2288abf88cce 100644 --- a/drivers/gpu/drm/i915/intel_sprite.c +++ b/drivers/gpu/drm/i915/intel_sprite.c @@ -466,10 +466,8 @@ intel_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, mutex_lock(&dev->struct_mutex); ret = intel_pin_and_fence_fb_obj(dev, obj, NULL); - if (ret) { - DRM_ERROR("failed to pin object\n"); + if (ret) goto out_unlock; - } intel_plane->obj = obj; @@ -632,10 +630,8 @@ intel_plane_init(struct drm_device *dev, enum pipe pipe) unsigned long possible_crtcs; int ret; - if (!(IS_GEN6(dev) || IS_GEN7(dev))) { - DRM_ERROR("new plane code only for SNB+\n"); + if (!(IS_GEN6(dev) || IS_GEN7(dev))) return -ENODEV; - } intel_plane = kzalloc(sizeof(struct intel_plane), GFP_KERNEL); if (!intel_plane) -- GitLab From 8109021313c7a3d8947677391ce6ab9cd0bb1d28 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 13 Jan 2012 16:20:06 -0800 Subject: [PATCH 0020/1359] drm/i915: convert force_wake_get to func pointer in the gpu reset code This was forgotten in the original multi-threaded forcewake conversion: commit 8d715f0024f64ad1b1be85d8c081cf577944c847 Author: Keith Packard Date: Fri Nov 18 20:39:01 2011 -0800 drm/i915: add multi-threaded forcewake support Signed-Off-by: Daniel Vetter Reviewed-by: Eugeni Dodonov Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_drv.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 8f7187915b0d..46c36f5cafb1 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -645,7 +645,7 @@ int i915_reset(struct drm_device *dev, u8 flags) ret = gen6_do_reset(dev, flags); /* If reset with a user forcewake, try to restore */ if (atomic_read(&dev_priv->forcewake_count)) - __gen6_gt_force_wake_get(dev_priv); + dev_priv->display.force_wake_get(dev_priv); break; case 5: ret = ironlake_do_reset(dev, flags); -- GitLab From 5d53cb27d849c899136c048ec84c940ac449494b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 13 Jan 2012 10:14:12 -0800 Subject: [PATCH 0021/1359] memblock: Fix alloc failure due to dumb underflow protection in memblock_find_in_range_node() 7bd0b0f0da ("memblock: Reimplement memblock allocation using reverse free area iterator") implemented a simple top-down allocator using a reverse memblock iterator. To avoid underflow in the allocator loop, it simply raised the lower boundary to the requested size under the assumption that requested size would be far smaller than available memblocks. This causes early page table allocation failure under certain configurations in Xen. Fix it by checking for underflow directly instead of bumping up lower bound. Signed-off-by: Tejun Heo Reported-by: Konrad Rzeszutek Wilk Cc: rjw@sisk.pl Cc: xen-devel@lists.xensource.com Cc: Benjamin Herrenschmidt Cc: Andrew Morton Cc: Linus Torvalds Link: http://lkml.kernel.org/r/20120113181412.GA11112@google.com Signed-off-by: Ingo Molnar --- mm/memblock.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/mm/memblock.c b/mm/memblock.c index 2f55f19b7c86..77b5f227e1d8 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -106,14 +106,17 @@ phys_addr_t __init_memblock memblock_find_in_range_node(phys_addr_t start, if (end == MEMBLOCK_ALLOC_ACCESSIBLE) end = memblock.current_limit; - /* adjust @start to avoid underflow and allocating the first page */ - start = max3(start, size, (phys_addr_t)PAGE_SIZE); + /* avoid allocating the first page */ + start = max_t(phys_addr_t, start, PAGE_SIZE); end = max(start, end); for_each_free_mem_range_reverse(i, nid, &this_start, &this_end, NULL) { this_start = clamp(this_start, start, end); this_end = clamp(this_end, start, end); + if (this_end < size) + continue; + cand = round_down(this_end - size, align); if (cand >= this_start) return cand; -- GitLab From d8e8ed95cda1dfd6813588333d36552935eba4a1 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Thu, 15 Dec 2011 13:43:24 +1030 Subject: [PATCH 0022/1359] rcu: Make rcutorture bool parameters really bool (core code) module_param(bool) used to counter-intuitively take an int. In fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy trick. It's time to remove the int/unsigned int option. For this version it'll simply give a warning, but it'll break next kernel version. This commit makes this change to rcutorture. Signed-off-by: Rusty Russell Signed-off-by: Paul E. McKenney --- kernel/rcutorture.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c index 88f17b8a3b1d..e29edc374cec 100644 --- a/kernel/rcutorture.c +++ b/kernel/rcutorture.c @@ -56,8 +56,8 @@ static int nreaders = -1; /* # reader threads, defaults to 2*ncpus */ static int nfakewriters = 4; /* # fake writer threads */ static int stat_interval; /* Interval between stats, in seconds. */ /* Defaults to "only at end of test". */ -static int verbose; /* Print more debug info. */ -static int test_no_idle_hz; /* Test RCU's support for tickless idle CPUs. */ +static bool verbose; /* Print more debug info. */ +static bool test_no_idle_hz; /* Test RCU's support for tickless idle CPUs. */ static int shuffle_interval = 3; /* Interval between shuffles (in sec)*/ static int stutter = 5; /* Start/stop testing interval (in sec) */ static int irqreader = 1; /* RCU readers from irq (timers). */ -- GitLab From 7061ca3b6c99fc78115560b9a10227c8c5fafc45 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Tue, 20 Dec 2011 08:20:46 -0800 Subject: [PATCH 0023/1359] sched: Add "const" to is_idle_task() parameter This patch fixes a build warning in -next due to a const pointer being passed to is_idle_task(). Because is_idle_task() does not modify anything, this commit adds the "const" to is_idle_task()'s argument declaration. Reported-by: Stephen Rothwell Signed-off-by: Paul E. McKenney --- include/linux/sched.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/sched.h b/include/linux/sched.h index 4a7e4d333a27..56fa25a5b1eb 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2074,7 +2074,7 @@ extern struct task_struct *idle_task(int cpu); * is_idle_task - is the specified task an idle task? * @tsk: the task in question. */ -static inline bool is_idle_task(struct task_struct *p) +static inline bool is_idle_task(const struct task_struct *p) { return p->pid == 0; } -- GitLab From 4410030646be072b82ec1892ad5cc7d91af384d8 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 27 Dec 2011 15:04:26 +0100 Subject: [PATCH 0024/1359] rcu: Add missing __cpuinit annotation in rcutorture code "rcu: Add rcutorture CPU-hotplug capability" adds cpu hotplug operations to the rcutorture code but produces a false positive warning about section mismatches: WARNING: vmlinux.o(.text+0x1e420c): Section mismatch in reference from the function rcu_torture_onoff() to the function .cpuinit.text:cpu_up() The function rcu_torture_onoff() references the function __cpuinit cpu_up(). This is often because rcu_torture_onoff lacks a __cpuinit annotation or the annotation of cpu_up is wrong. This commit therefore adds a __cpuinit annotation so the warning goes away. Signed-off-by: Heiko Carstens Signed-off-by: Paul E. McKenney --- kernel/rcutorture.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/kernel/rcutorture.c b/kernel/rcutorture.c index e29edc374cec..a58ac285fc69 100644 --- a/kernel/rcutorture.c +++ b/kernel/rcutorture.c @@ -1399,7 +1399,7 @@ rcu_torture_shutdown(void *arg) * Execute random CPU-hotplug operations at the interval specified * by the onoff_interval. */ -static int +static int __cpuinit rcu_torture_onoff(void *arg) { int cpu; @@ -1447,7 +1447,7 @@ rcu_torture_onoff(void *arg) return 0; } -static int +static int __cpuinit rcu_torture_onoff_init(void) { if (onoff_interval <= 0) -- GitLab From 78da107a7ed14fbc6ef77ff4c41d92b11edc9036 Mon Sep 17 00:00:00 2001 From: "Shimoda, Yoshihiro" Date: Tue, 17 Jan 2012 17:49:38 +0900 Subject: [PATCH 0025/1359] sh: fix the sh_mmcif_plat_data in board-sh7757lcr The board has an eMMC chip, so we cannot remove the chip. In this case, we have to set the MMC_CAP_NONREMOVABLE to the caps parameter. Reported-by: Guennadi Liakhovetski Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt --- arch/sh/boards/board-sh7757lcr.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 0838154dd216..33dc5b6e8e17 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -222,7 +222,8 @@ static struct sh_mmcif_dma sh7757lcr_mmcif_dma = { static struct sh_mmcif_plat_data sh_mmcif_plat = { .dma = &sh7757lcr_mmcif_dma, .sup_pclk = 0x0f, - .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | + MMC_CAP_NONREMOVABLE, .ocr = MMC_VDD_32_33 | MMC_VDD_33_34, }; -- GitLab From 0df1a838d678fc6ab49f983a19e905f6a42297a0 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 17 Jan 2012 20:05:40 +0900 Subject: [PATCH 0026/1359] ARM: mach-shmobile: sh73a0 PINT IRQ base fix Bump up the sh73a0 PINT IRQ base from 768 to 800 to avoid collision with INTCS vectors for IRQ16->IRQ32 at 0x3xxx. Without this fix the sh73a0 IRQ pin handling code collides with the PINT code which results in hangs on Kota2 during boot. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/include/mach/sh73a0.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-shmobile/include/mach/sh73a0.h b/arch/arm/mach-shmobile/include/mach/sh73a0.h index 881d515a9686..cad57578ceed 100644 --- a/arch/arm/mach-shmobile/include/mach/sh73a0.h +++ b/arch/arm/mach-shmobile/include/mach/sh73a0.h @@ -515,8 +515,8 @@ enum { SHDMA_SLAVE_MMCIF_RX, }; -/* PINT interrupts are located at Linux IRQ 768 and up */ -#define SH73A0_PINT0_IRQ(irq) ((irq) + 768) -#define SH73A0_PINT1_IRQ(irq) ((irq) + 800) +/* PINT interrupts are located at Linux IRQ 800 and up */ +#define SH73A0_PINT0_IRQ(irq) ((irq) + 800) +#define SH73A0_PINT1_IRQ(irq) ((irq) + 832) #endif /* __ASM_SH73A0_H__ */ -- GitLab From e2c31b3fdd48274e9deb450e21279e54dfa02ccd Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 17 Jan 2012 20:10:49 +0900 Subject: [PATCH 0027/1359] ARM: mach-shmobile: sh73a0 IRQ sparse alloc fix Fix the sh73a0 external IRQ pin code to properly support CONFIG_SPARSE_IRQ=y by allocating IRQ descriptors for the cascaded IRQs associated with external IRQ pins. Without this fix it is impossible to request IRQ0->IRQ31 on the Kota2 board when sparse IRQs are enabled. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/intc-sh73a0.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-shmobile/intc-sh73a0.c b/arch/arm/mach-shmobile/intc-sh73a0.c index 1eda6b0b69e3..9857595eaa79 100644 --- a/arch/arm/mach-shmobile/intc-sh73a0.c +++ b/arch/arm/mach-shmobile/intc-sh73a0.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include #include @@ -445,6 +446,7 @@ void __init sh73a0_init_irq(void) setup_irq(gic_spi(1 + k), &sh73a0_irq_pin_cascade[k]); n = intcs_evt2irq(to_intc_vect(gic_spi(1 + k))); + WARN_ON(irq_alloc_desc_at(n, numa_node_id()) != n); irq_set_chip_and_handler_name(n, &intca_gic_irq_chip, handle_level_irq, "level"); set_irq_flags(n, IRQF_VALID); /* yuck */ -- GitLab From 2fde109c2d79e9791250a5d212c13055e9216a55 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 17 Jan 2012 20:14:07 +0900 Subject: [PATCH 0028/1359] ARM: mach-shmobile: IRQ driven GPIO key support for Kota2 Now when GPIO IRQs are supported on sh73a0 modify the Kota2 board code to switch from the polled "gpio-keys-polled" driver to the IRQ driven "gpio-keys" driver. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-kota2.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/arch/arm/mach-shmobile/board-kota2.c b/arch/arm/mach-shmobile/board-kota2.c index 857ceeec1bb0..c8e7ca23fc06 100644 --- a/arch/arm/mach-shmobile/board-kota2.c +++ b/arch/arm/mach-shmobile/board-kota2.c @@ -143,11 +143,10 @@ static struct gpio_keys_button gpio_buttons[] = { static struct gpio_keys_platform_data gpio_key_info = { .buttons = gpio_buttons, .nbuttons = ARRAY_SIZE(gpio_buttons), - .poll_interval = 250, /* polled for now */ }; static struct platform_device gpio_keys_device = { - .name = "gpio-keys-polled", /* polled for now */ + .name = "gpio-keys", .id = -1, .dev = { .platform_data = &gpio_key_info, -- GitLab From d5bb386d70c8e8e79c7f652a794610e01d79f33e Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Tue, 30 Aug 2011 18:26:44 +0200 Subject: [PATCH 0029/1359] ARM: mach-shmobile: simplify MMCIF DMA configuration Use the simplified method to specify MMCIF DMA slave configuration. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 11 ++--------- arch/arm/mach-shmobile/board-ap4evb.c | 12 ++---------- arch/arm/mach-shmobile/board-mackerel.c | 12 ++---------- 3 files changed, 6 insertions(+), 29 deletions(-) diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index eff8a96c75ee..729eaee5a151 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -159,19 +159,12 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; static struct sh_mmcif_plat_data sh_mmcif_platdata = { .sup_pclk = 0, .ocr = MMC_VDD_165_195, .caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device mmc_device = { diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c index aab0a349f759..eeb4d9664584 100644 --- a/arch/arm/mach-shmobile/board-ap4evb.c +++ b/arch/arm/mach-shmobile/board-ap4evb.c @@ -295,15 +295,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -311,7 +302,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd10f8e..1a955e2a334f 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -1184,15 +1184,6 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh_mmcif_dma = { - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - }, - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { .sup_pclk = 0, .ocr = MMC_VDD_165_195 | MMC_VDD_32_33 | MMC_VDD_33_34, @@ -1200,7 +1191,8 @@ static struct sh_mmcif_plat_data sh_mmcif_plat = { MMC_CAP_8_BIT_DATA | MMC_CAP_NEEDS_POLL, .get_cd = slot_cn7_get_cd, - .dma = &sh_mmcif_dma, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { -- GitLab From 48cfe37cc03f616e6c139796962e7ec677cde8a9 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 21 Dec 2011 14:20:23 -0500 Subject: [PATCH 0030/1359] target: don't allocate bio headroom in iblock We never embedd the bio into a structure, so there is no need to allocate 64 bytes of headroom per bio. Signed-off-by: Christoph Hellwig Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_iblock.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index cc8e6b58ef20..628e877381d8 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -129,7 +129,7 @@ static struct se_device *iblock_create_virtdevice( /* * These settings need to be made tunable.. */ - ib_dev->ibd_bio_set = bioset_create(32, 64); + ib_dev->ibd_bio_set = bioset_create(32, 0); if (!ib_dev->ibd_bio_set) { pr_err("IBLOCK: Unable to create bioset()\n"); return ERR_PTR(-ENOMEM); -- GitLab From 9e08e34e3735ae057eb3834da3570995811b7eb9 Mon Sep 17 00:00:00 2001 From: Marco Sanvido Date: Tue, 3 Jan 2012 17:12:57 -0800 Subject: [PATCH 0031/1359] target: Use correct preempted registration sense code The comments quote the right parts of the spec: * d) Establish a unit attention condition for the * initiator port associated with every I_T nexus * that lost its registration other than the I_T * nexus on which the PERSISTENT RESERVE OUT command * was received, with the additional sense code set * to REGISTRATIONS PREEMPTED. and * e) Establish a unit attention condition for the initiator * port associated with every I_T nexus that lost its * persistent reservation and/or registration, with the * additional sense code set to REGISTRATIONS PREEMPTED; but the actual code accidentally uses ASCQ_2AH_RESERVATIONS_PREEMPTED instead of ASCQ_2AH_REGISTRATIONS_PREEMPTED. Fix this. Signed-off-by: Marco Sanvido Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_pr.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 429ad7291664..d14860ff2508 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -3120,7 +3120,7 @@ static int core_scsi3_pro_preempt( if (!calling_it_nexus) core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A, - ASCQ_2AH_RESERVATIONS_PREEMPTED); + ASCQ_2AH_REGISTRATIONS_PREEMPTED); } spin_unlock(&pr_tmpl->registration_lock); /* @@ -3233,7 +3233,7 @@ static int core_scsi3_pro_preempt( * additional sense code set to REGISTRATIONS PREEMPTED; */ core_scsi3_ua_allocate(pr_reg_nacl, pr_res_mapped_lun, 0x2A, - ASCQ_2AH_RESERVATIONS_PREEMPTED); + ASCQ_2AH_REGISTRATIONS_PREEMPTED); } spin_unlock(&pr_tmpl->registration_lock); /* -- GitLab From 6816966a8418b980481b4dced7eddd1796b145e8 Mon Sep 17 00:00:00 2001 From: Marco Sanvido Date: Tue, 3 Jan 2012 17:12:58 -0800 Subject: [PATCH 0032/1359] target: Allow PERSISTENT RESERVE IN for non-reservation holder Initiators that aren't the active reservation holder should be able to do a PERSISTENT RESERVE IN command in all cases, so add it to the list of allowed CDBs in core_scsi3_pr_seq_non_holder(). Signed-off-by: Marco Sanvido Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_pr.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index d14860ff2508..68c71cd7a88e 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -478,6 +478,7 @@ static int core_scsi3_pr_seq_non_holder( case READ_MEDIA_SERIAL_NUMBER: case REPORT_LUNS: case REQUEST_SENSE: + case PERSISTENT_RESERVE_IN: ret = 0; /*/ Allowed CDBs */ break; default: -- GitLab From 9db9da332250dbe662995703a4dcdd692112f0c3 Mon Sep 17 00:00:00 2001 From: "roland@purestorage.com" Date: Wed, 4 Jan 2012 15:59:58 -0800 Subject: [PATCH 0033/1359] target: Don't zero pages used for data buffers Doing alloc_page(GFP_KERNEL | __GFP_ZERO) to get pages used for data buffers wastes a lot of CPU clearing pages that will be quickly be overwritten by the actual data. However, for emulated control commands such as INQUIRY and so on, the code does assume that the buffer is zeroed. To avoid this CPU overhead, skip the __GFP_ZERO for commands that are actually moving data, ie cmds that have SCF_SCSI_DATA_SG_IO_CDB set. Signed-off-by: Roland Dreier Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index d3ddd1361949..289bc0f125f9 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3516,6 +3516,7 @@ transport_generic_get_mem(struct se_cmd *cmd) u32 length = cmd->data_length; unsigned int nents; struct page *page; + gfp_t zero_flag; int i = 0; nents = DIV_ROUND_UP(length, PAGE_SIZE); @@ -3526,9 +3527,11 @@ transport_generic_get_mem(struct se_cmd *cmd) cmd->t_data_nents = nents; sg_init_table(cmd->t_data_sg, nents); + zero_flag = cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB ? 0 : __GFP_ZERO; + while (length) { u32 page_len = min_t(u32, length, PAGE_SIZE); - page = alloc_page(GFP_KERNEL | __GFP_ZERO); + page = alloc_page(GFP_KERNEL | zero_flag); if (!page) goto out; -- GitLab From 9fbc8909876a2160044e71d376848973b9bfdc3f Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 9 Jan 2012 17:54:00 -0800 Subject: [PATCH 0034/1359] target: Correct sense key for INVALID FIELD IN {PARAMETER LIST,CDB} According to SPC-4, the sense key for commands that are failed with INVALID FIELD IN PARAMETER LIST and INVALID FIELD IN CDB should be ILLEGAL REQUEST (5h) rather than ABORTED COMMAND (Bh). Without this patch, a tcm_loop LUN incorrectly gives: # sg_raw -r 1 -v /dev/sda 3 1 0 0 ff 0 Sense Information: Fixed format, current; Sense key: Aborted Command Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 0b 00 00 00 00 0a 00 00 00 00 24 00 00 00 00 00 While a real SCSI disk gives: Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 05 00 00 00 00 18 00 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 with the main point being that the real disk gives a sense key of ILLEGAL REQUEST (5h). Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 289bc0f125f9..2869fb7d2c05 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -4451,8 +4451,8 @@ int transport_send_check_condition_and_sense( /* CURRENT ERROR */ buffer[offset] = 0x70; buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10; - /* ABORTED COMMAND */ - buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* ILLEGAL REQUEST */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST; /* INVALID FIELD IN CDB */ buffer[offset+SPC_ASC_KEY_OFFSET] = 0x24; break; @@ -4460,8 +4460,8 @@ int transport_send_check_condition_and_sense( /* CURRENT ERROR */ buffer[offset] = 0x70; buffer[offset+SPC_ADD_SENSE_LEN_OFFSET] = 10; - /* ABORTED COMMAND */ - buffer[offset+SPC_SENSE_KEY_OFFSET] = ABORTED_COMMAND; + /* ILLEGAL REQUEST */ + buffer[offset+SPC_SENSE_KEY_OFFSET] = ILLEGAL_REQUEST; /* INVALID FIELD IN PARAMETER LIST */ buffer[offset+SPC_ASC_KEY_OFFSET] = 0x26; break; -- GitLab From 91ec1d3535b2acf12c599045cc19ad9be3c6a47b Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Fri, 13 Jan 2012 12:01:34 -0800 Subject: [PATCH 0035/1359] target: Add workaround for zero-length control CDB handling This patch adds a work-around for handling zero allocation length control CDBs (type SCF_SCSI_CONTROL_SG_IO_CDB) that was causing an OOPs with the following raw calls: # sg_raw -v /dev/sdd 3 0 0 0 0 0 # sg_raw -v /dev/sdd 0x1a 0 1 0 0 0 This patch will follow existing zero-length handling for data I/O and silently return with GOOD status. This addresses the zero length issue, but the proper long-term resolution for handling arbitary allocation lengths will be to refactor out data-phase handling in individual CDB emulation logic within target_core_cdb.c Reported-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 2869fb7d2c05..50d6911d4120 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3759,6 +3759,11 @@ transport_allocate_control_task(struct se_cmd *cmd) struct se_task *task; unsigned long flags; + /* Workaround for handling zero-length control CDBs */ + if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) && + !cmd->data_length) + return 0; + task = transport_generic_get_task(cmd, cmd->data_direction); if (!task) return -ENOMEM; @@ -3830,6 +3835,14 @@ int transport_generic_new_cmd(struct se_cmd *cmd) else if (!task_cdbs && (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB)) { cmd->t_state = TRANSPORT_COMPLETE; atomic_set(&cmd->t_transport_active, 1); + + if (cmd->t_task_cdb[0] == REQUEST_SENSE) { + u8 ua_asc = 0, ua_ascq = 0; + + core_scsi3_ua_clear_for_request_sense(cmd, + &ua_asc, &ua_ascq); + } + INIT_WORK(&cmd->work, target_complete_ok_work); queue_work(target_completion_wq, &cmd->work); return 0; -- GitLab From e59a41b69a8e116d5ac8c95c4222f5a971f66bbd Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 10 Jan 2012 14:16:57 +0100 Subject: [PATCH 0036/1359] target: avoid multiple outputs in scsi_dump_inquiry() The multiple calls to pr_debug() each with one letter results in a new line. This patch merges the multiple requests into one call per line so we don't have the multiple line cuts. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_transport.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-) diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 50d6911d4120..e186f7db3860 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1255,32 +1255,34 @@ static void core_setup_task_attr_emulation(struct se_device *dev) static void scsi_dump_inquiry(struct se_device *dev) { struct t10_wwn *wwn = &dev->se_sub_dev->t10_wwn; + char buf[17]; int i, device_type; /* * Print Linux/SCSI style INQUIRY formatting to the kernel ring buffer */ - pr_debug(" Vendor: "); for (i = 0; i < 8; i++) if (wwn->vendor[i] >= 0x20) - pr_debug("%c", wwn->vendor[i]); + buf[i] = wwn->vendor[i]; else - pr_debug(" "); + buf[i] = ' '; + buf[i] = '\0'; + pr_debug(" Vendor: %s\n", buf); - pr_debug(" Model: "); for (i = 0; i < 16; i++) if (wwn->model[i] >= 0x20) - pr_debug("%c", wwn->model[i]); + buf[i] = wwn->model[i]; else - pr_debug(" "); + buf[i] = ' '; + buf[i] = '\0'; + pr_debug(" Model: %s\n", buf); - pr_debug(" Revision: "); for (i = 0; i < 4; i++) if (wwn->revision[i] >= 0x20) - pr_debug("%c", wwn->revision[i]); + buf[i] = wwn->revision[i]; else - pr_debug(" "); - - pr_debug("\n"); + buf[i] = ' '; + buf[i] = '\0'; + pr_debug(" Revision: %s\n", buf); device_type = dev->transport->get_device_type(dev); pr_debug(" Type: %s ", scsi_device_type(device_type)); -- GitLab From 1dd0a0674530da61cdbfadd88c96949b483a7c19 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 10 Jan 2012 14:16:58 +0100 Subject: [PATCH 0037/1359] target: use save/restore lock primitive in core_dec_lacl_count() It may happen that uasp will free the request in irq conntext, the callchain: uasp_cmd_release() -> transport_generic_free_cmd() -> core_dec_lacl_count() where the last function enables the IRQ. Those irqs are re-disabled later (due to the spin.*irq_restore) but in between we could get hurt. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 0c5992f0d946..00159a4e781f 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -320,11 +320,12 @@ int core_free_device_list_for_node( void core_dec_lacl_count(struct se_node_acl *se_nacl, struct se_cmd *se_cmd) { struct se_dev_entry *deve; + unsigned long flags; - spin_lock_irq(&se_nacl->device_list_lock); + spin_lock_irqsave(&se_nacl->device_list_lock, flags); deve = &se_nacl->device_list[se_cmd->orig_fe_lun]; deve->deve_cmds--; - spin_unlock_irq(&se_nacl->device_list_lock); + spin_unlock_irqrestore(&se_nacl->device_list_lock, flags); } void core_update_device_list_access( -- GitLab From 8d9efe539cf78f6a90947d47100e4a86d907750f Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 11 Jan 2012 21:43:38 +0100 Subject: [PATCH 0038/1359] target: fix return code of core_tpg_.*_lun - core_tpg_pre_addlun() returns always ERR_PTR() or the pointer, never NULL. The additional check for NULL in core_dev_add_lun() is not required. - core_tpg_pre_dellun() returns always ERR_PTR() or the pointer, never NULL. The check for NULL in core_dev_del_lun() is wrong. The third argument (int *) is never used, remove it. - core_dev_add_lun() returns always NULL or the pointer, never ERR_PTR. The check for IS_ERR() is not required. (nab: Convert core_dev_add_lun() use err.h macros for failure handling to be consistent with the rest of target_core_fabric_configfs.c callers) Signed-off-by: Sebastian Andrzej Siewior Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_device.c | 19 ++++++++++--------- drivers/target/target_core_fabric_configfs.c | 4 ++-- drivers/target/target_core_internal.h | 2 +- drivers/target/target_core_tpg.c | 3 +-- 4 files changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index 00159a4e781f..de5f4fea7f62 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -1295,24 +1295,26 @@ struct se_lun *core_dev_add_lun( { struct se_lun *lun_p; u32 lun_access = 0; + int rc; if (atomic_read(&dev->dev_access_obj.obj_access_count) != 0) { pr_err("Unable to export struct se_device while dev_access_obj: %d\n", atomic_read(&dev->dev_access_obj.obj_access_count)); - return NULL; + return ERR_PTR(-EACCES); } lun_p = core_tpg_pre_addlun(tpg, lun); - if ((IS_ERR(lun_p)) || !lun_p) - return NULL; + if (IS_ERR(lun_p)) + return lun_p; if (dev->dev_flags & DF_READ_ONLY) lun_access = TRANSPORT_LUNFLAGS_READ_ONLY; else lun_access = TRANSPORT_LUNFLAGS_READ_WRITE; - if (core_tpg_post_addlun(tpg, lun_p, lun_access, dev) < 0) - return NULL; + rc = core_tpg_post_addlun(tpg, lun_p, lun_access, dev); + if (rc < 0) + return ERR_PTR(rc); pr_debug("%s_TPG[%u]_LUN[%u] - Activated %s Logical Unit from" " CORE HBA: %u\n", tpg->se_tpg_tfo->get_fabric_name(), @@ -1349,11 +1351,10 @@ int core_dev_del_lun( u32 unpacked_lun) { struct se_lun *lun; - int ret = 0; - lun = core_tpg_pre_dellun(tpg, unpacked_lun, &ret); - if (!lun) - return ret; + lun = core_tpg_pre_dellun(tpg, unpacked_lun); + if (IS_ERR(lun)) + return PTR_ERR(lun); core_tpg_post_dellun(tpg, lun); diff --git a/drivers/target/target_core_fabric_configfs.c b/drivers/target/target_core_fabric_configfs.c index 4f77cce22646..9a2ce11e1a6e 100644 --- a/drivers/target/target_core_fabric_configfs.c +++ b/drivers/target/target_core_fabric_configfs.c @@ -766,9 +766,9 @@ static int target_fabric_port_link( lun_p = core_dev_add_lun(se_tpg, dev->se_hba, dev, lun->unpacked_lun); - if (IS_ERR(lun_p) || !lun_p) { + if (IS_ERR(lun_p)) { pr_err("core_dev_add_lun() failed\n"); - ret = -EINVAL; + ret = PTR_ERR(lun_p); goto out; } diff --git a/drivers/target/target_core_internal.h b/drivers/target/target_core_internal.h index 26f135e94f6e..45001364788a 100644 --- a/drivers/target/target_core_internal.h +++ b/drivers/target/target_core_internal.h @@ -90,7 +90,7 @@ void core_tpg_wait_for_nacl_pr_ref(struct se_node_acl *); struct se_lun *core_tpg_pre_addlun(struct se_portal_group *, u32); int core_tpg_post_addlun(struct se_portal_group *, struct se_lun *, u32, void *); -struct se_lun *core_tpg_pre_dellun(struct se_portal_group *, u32, int *); +struct se_lun *core_tpg_pre_dellun(struct se_portal_group *, u32 unpacked_lun); int core_tpg_post_dellun(struct se_portal_group *, struct se_lun *); /* target_core_transport.c */ diff --git a/drivers/target/target_core_tpg.c b/drivers/target/target_core_tpg.c index b7668029bb31..06336ecd872d 100644 --- a/drivers/target/target_core_tpg.c +++ b/drivers/target/target_core_tpg.c @@ -807,8 +807,7 @@ static void core_tpg_shutdown_lun( struct se_lun *core_tpg_pre_dellun( struct se_portal_group *tpg, - u32 unpacked_lun, - int *ret) + u32 unpacked_lun) { struct se_lun *lun; -- GitLab From c1ce4bd56f2846de55043374598fd929ad3b711b Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 16 Jan 2012 16:04:15 -0800 Subject: [PATCH 0039/1359] iscsi-target: Fix reject release handling in iscsit_free_cmd() This patch addresses a bug where iscsit_free_cmd() was incorrectly calling iscsit_release_cmd() for ISCSI_OP_REJECT because iscsi_add_reject*() will overwrite the original iscsi_cmd->iscsi_opcode assignment. This bug was introduced with the following commit: commit 0be67f2ed8f577d2c72d917928394c5885fa9134 Author: Nicholas Bellinger Date: Sun Oct 9 01:48:14 2011 -0700 iscsi-target: Remove SCF_SE_LUN_CMD flag abuses and was manifesting itself as list corruption with the following: [ 131.191092] ------------[ cut here ]------------ [ 131.191092] WARNING: at lib/list_debug.c:53 __list_del_entry+0x8d/0x98() [ 131.191092] Hardware name: VMware Virtual Platform [ 131.191092] list_del corruption. prev->next should be ffff880022d3c100, but was 6b6b6b6b6b6b6b6b [ 131.191092] Modules linked in: tcm_vhost ib_srpt ib_cm ib_sa ib_mad ib_core tcm_qla2xxx qla2xxx tcm_loop tcm_fc libfc scsi_transport_fc crc32c iscsi_target_mod target_core_stgt scsi_tgt target_core_pscsi target_core_file target_core_iblock target_core_mod configfs ipv6 iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi sr_mod cdrom sd_mod e1000 ata_piix libata mptspi mptscsih mptbase [last unloaded: scsi_wait_scan] [ 131.191092] Pid: 2250, comm: iscsi_ttx Tainted: G W 3.2.0-rc4+ #42 [ 131.191092] Call Trace: [ 131.191092] [] warn_slowpath_common+0x80/0x98 [ 131.191092] [] warn_slowpath_fmt+0x41/0x43 [ 131.191092] [] __list_del_entry+0x8d/0x98 [ 131.191092] [] transport_lun_remove_cmd+0x9b/0xb7 [target_core_mod] [ 131.191092] [] transport_generic_free_cmd+0x5d/0x71 [target_core_mod] [ 131.191092] [] iscsit_free_cmd+0x1e/0x27 [iscsi_target_mod] [ 131.191092] [] iscsit_close_connection+0x14d/0x5b2 [iscsi_target_mod] [ 131.191092] [] iscsit_take_action_for_connection_exit+0xdb/0xe0 [iscsi_target_mod] [ 131.191092] [] iscsi_target_tx_thread+0x15cb/0x1608 [iscsi_target_mod] [ 131.191092] [] ? check_preempt_wakeup+0x121/0x185 [ 131.191092] [] ? __dequeue_entity+0x2e/0x33 [ 131.191092] [] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [] ? iscsit_send_text_rsp+0x25f/0x25f [iscsi_target_mod] [ 131.191092] [] ? schedule+0x55/0x57 [ 131.191092] [] kthread+0x7d/0x85 [ 131.191092] [] kernel_thread_helper+0x4/0x10 [ 131.191092] [] ? kthread_worker_fn+0x16d/0x16d [ 131.191092] [] ? gs_change+0x13/0x13 Reported-by: Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_util.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index a05ca1c4f01c..11287e1ece13 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -849,6 +849,17 @@ void iscsit_free_cmd(struct iscsi_cmd *cmd) case ISCSI_OP_SCSI_TMFUNC: transport_generic_free_cmd(&cmd->se_cmd, 1); break; + case ISCSI_OP_REJECT: + /* + * Handle special case for REJECT when iscsi_add_reject*() has + * overwritten the original iscsi_opcode assignment, and the + * associated cmd->se_cmd needs to be released. + */ + if (cmd->se_cmd.se_tfo != NULL) { + transport_generic_free_cmd(&cmd->se_cmd, 1); + break; + } + /* Fall-through */ default: iscsit_release_cmd(cmd); break; -- GitLab From cd931ee62fd0258fc85c76a7c5499fe85e0f3436 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 16 Jan 2012 17:11:54 -0800 Subject: [PATCH 0040/1359] iscsi-target: Fix double list_add with iscsit_alloc_buffs reject This patch fixes a bug where the iscsit_add_reject_from_cmd() call from a failure to iscsit_alloc_buffs() was incorrectly passing add_to_conn=1 and causing a double list_add after iscsi_cmd->i_list had already been added in iscsit_handle_scsi_cmd(). Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index ac44af165b27..6e070e0a8393 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -1061,7 +1061,7 @@ attach_cmd: if (ret < 0) return iscsit_add_reject_from_cmd( ISCSI_REASON_BOOKMARK_NO_RESOURCES, - 1, 1, buf, cmd); + 1, 0, buf, cmd); /* * Check the CmdSN against ExpCmdSN/MaxCmdSN here if * the Immediate Bit is not set, and no Immediate -- GitLab From f8d48ae52eeec906d7fb42485eb26a5d305bab0a Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sun, 15 Jan 2012 14:30:24 +0300 Subject: [PATCH 0041/1359] iscsi-target: make one-bit bitfields unsigned Signed bitfields are a problem because instead of being 1 or 0 like you'd expect they are 0 and -1. It doesn't cause a problem in this case but sparse complains: drivers/target/iscsi/iscsi_target_core.h:564:56: error: dubious one-bit signed bitfield Signed-off-by: Dan Carpenter Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_core.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index f1a02dad05a0..ebf81fdbb5c5 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -561,8 +561,8 @@ struct iscsi_conn { struct hash_desc conn_tx_hash; /* Used for scheduling TX and RX connection kthreads */ cpumask_var_t conn_cpumask; - int conn_rx_reset_cpumask:1; - int conn_tx_reset_cpumask:1; + unsigned int conn_rx_reset_cpumask:1; + unsigned int conn_tx_reset_cpumask:1; /* list_head of struct iscsi_cmd for this connection */ struct list_head conn_cmd_list; struct list_head immed_queue_list; -- GitLab From e8904dc5008ef92f0f62391d6557f03f921eeb32 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Sun, 15 Jan 2012 19:33:30 +0100 Subject: [PATCH 0042/1359] iscsi-target: Fix up a few assignments A statement such as struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess); has undefined behaviour since there are two assignments to 'na', strictly speaking (the order in which side-effects from the assignments take place is undefined since there's no intervening sequence point), and it looks unintentional in any case. Signed-off-by: Jesper Juhl Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target_erl1.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target_erl1.c b/drivers/target/iscsi/iscsi_target_erl1.c index 255c0d67e898..27901e37c125 100644 --- a/drivers/target/iscsi/iscsi_target_erl1.c +++ b/drivers/target/iscsi/iscsi_target_erl1.c @@ -1238,7 +1238,7 @@ void iscsit_mod_dataout_timer(struct iscsi_cmd *cmd) { struct iscsi_conn *conn = cmd->conn; struct iscsi_session *sess = conn->sess; - struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess); + struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess); spin_lock_bh(&cmd->dataout_timeout_lock); if (!(cmd->dataout_timer_flags & ISCSI_TF_RUNNING)) { @@ -1261,7 +1261,7 @@ void iscsit_start_dataout_timer( struct iscsi_conn *conn) { struct iscsi_session *sess = conn->sess; - struct iscsi_node_attrib *na = na = iscsit_tpg_get_node_attrib(sess); + struct iscsi_node_attrib *na = iscsit_tpg_get_node_attrib(sess); if (cmd->dataout_timer_flags & ISCSI_TF_RUNNING) return; -- GitLab From 4949314c7283ea4f9ade182ca599583b89f7edd6 Mon Sep 17 00:00:00 2001 From: Andy Grover Date: Mon, 16 Jan 2012 16:57:08 -0800 Subject: [PATCH 0043/1359] target: Allow control CDBs with data > 1 page We need to handle >1 page control cdbs, so extend the code to do a vmap if bigger than 1 page. It seems like kmap() is still preferable if just a page, fewer TLB shootdowns(?), so keep using that when possible. Rename function pair for their new scope. Signed-off-by: Andy Grover Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_alua.c | 8 ++--- drivers/target/target_core_cdb.c | 28 ++++++++-------- drivers/target/target_core_device.c | 4 +-- drivers/target/target_core_pr.c | 38 +++++++++++----------- drivers/target/target_core_pscsi.c | 4 +-- drivers/target/target_core_transport.c | 45 +++++++++++++++++++------- include/target/target_core_backend.h | 4 +-- include/target/target_core_base.h | 1 + 8 files changed, 78 insertions(+), 54 deletions(-) diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index 1b1edd14f4bf..01a2691dfb47 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -78,7 +78,7 @@ int target_emulate_report_target_port_groups(struct se_task *task) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); spin_lock(&su_dev->t10_alua.tg_pt_gps_lock); list_for_each_entry(tg_pt_gp, &su_dev->t10_alua.tg_pt_gps_list, @@ -163,7 +163,7 @@ int target_emulate_report_target_port_groups(struct se_task *task) buf[2] = ((rd_len >> 8) & 0xff); buf[3] = (rd_len & 0xff); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -194,7 +194,7 @@ int target_emulate_set_target_port_groups(struct se_task *task) cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); /* * Determine if explict ALUA via SET_TARGET_PORT_GROUPS is allowed @@ -351,7 +351,7 @@ int target_emulate_set_target_port_groups(struct se_task *task) } out: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); return 0; diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 2f2235edefff..07a3025d0622 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -83,7 +83,7 @@ target_emulate_inquiry_std(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); if (dev == tpg->tpg_virt_lun0.lun_se_dev) { buf[0] = 0x3f; /* Not connected */ @@ -134,7 +134,7 @@ target_emulate_inquiry_std(struct se_cmd *cmd) buf[4] = 31; /* Set additional length to 31 */ out: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } @@ -716,7 +716,7 @@ int target_emulate_inquiry(struct se_task *task) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = dev->transport->get_device_type(dev); @@ -733,7 +733,7 @@ int target_emulate_inquiry(struct se_task *task) ret = -EINVAL; out_unmap: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); out: if (!ret) { task->task_scsi_status = GOOD; @@ -755,7 +755,7 @@ int target_emulate_readcapacity(struct se_task *task) else blocks = (u32)blocks_long; - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = (blocks >> 24) & 0xff; buf[1] = (blocks >> 16) & 0xff; @@ -771,7 +771,7 @@ int target_emulate_readcapacity(struct se_task *task) if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws) put_unaligned_be32(0xFFFFFFFF, &buf[0]); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -785,7 +785,7 @@ int target_emulate_readcapacity_16(struct se_task *task) unsigned char *buf; unsigned long long blocks = dev->transport->get_blocks(dev); - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = (blocks >> 56) & 0xff; buf[1] = (blocks >> 48) & 0xff; @@ -806,7 +806,7 @@ int target_emulate_readcapacity_16(struct se_task *task) if (dev->se_sub_dev->se_dev_attrib.emulate_tpu || dev->se_sub_dev->se_dev_attrib.emulate_tpws) buf[14] = 0x80; - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -1019,9 +1019,9 @@ int target_emulate_modesense(struct se_task *task) offset = cmd->data_length; } - rbuf = transport_kmap_first_data_page(cmd); + rbuf = transport_kmap_data_sg(cmd); memcpy(rbuf, buf, offset); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); @@ -1043,7 +1043,7 @@ int target_emulate_request_sense(struct se_task *task) return -ENOSYS; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) { /* @@ -1089,7 +1089,7 @@ int target_emulate_request_sense(struct se_task *task) } end: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); task->task_scsi_status = GOOD; transport_complete_task(task, 1); return 0; @@ -1123,7 +1123,7 @@ int target_emulate_unmap(struct se_task *task) dl = get_unaligned_be16(&cdb[0]); bd_dl = get_unaligned_be16(&cdb[2]); - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); ptr = &buf[offset]; pr_debug("UNMAP: Sub: %s Using dl: %hu bd_dl: %hu size: %hu" @@ -1147,7 +1147,7 @@ int target_emulate_unmap(struct se_task *task) } err: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); if (!ret) { task->task_scsi_status = GOOD; transport_complete_task(task, 1); diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index de5f4fea7f62..edbcabbf85f7 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -657,7 +657,7 @@ int target_report_luns(struct se_task *se_task) unsigned char *buf; u32 cdb_offset = 0, lun_count = 0, offset = 8, i; - buf = transport_kmap_first_data_page(se_cmd); + buf = (unsigned char *) transport_kmap_data_sg(se_cmd); /* * If no struct se_session pointer is present, this struct se_cmd is @@ -695,7 +695,7 @@ int target_report_luns(struct se_task *se_task) * See SPC3 r07, page 159. */ done: - transport_kunmap_first_data_page(se_cmd); + transport_kunmap_data_sg(se_cmd); lun_count *= 8; buf[0] = ((lun_count >> 24) & 0xff); buf[1] = ((lun_count >> 16) & 0xff); diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 68c71cd7a88e..b7c779389eea 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -1535,7 +1535,7 @@ static int core_scsi3_decode_spec_i_port( tidh_new->dest_local_nexus = 1; list_add_tail(&tidh_new->dest_list, &tid_dest_list); - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); /* * For a PERSISTENT RESERVE OUT specify initiator ports payload, * first extract TransportID Parameter Data Length, and make sure @@ -1786,7 +1786,7 @@ static int core_scsi3_decode_spec_i_port( } - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); /* * Go ahead and create a registrations from tid_dest_list for the @@ -1834,7 +1834,7 @@ static int core_scsi3_decode_spec_i_port( return 0; out: - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); /* * For the failure case, release everything from tid_dest_list * including *dest_pr_reg and the configfs dependances.. @@ -3411,14 +3411,14 @@ static int core_scsi3_emulate_pro_register_and_move( * will be moved to for the TransportID containing SCSI initiator WWN * information. */ - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); rtpi = (buf[18] & 0xff) << 8; rtpi |= buf[19] & 0xff; tid_len = (buf[20] & 0xff) << 24; tid_len |= (buf[21] & 0xff) << 16; tid_len |= (buf[22] & 0xff) << 8; tid_len |= buf[23] & 0xff; - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); buf = NULL; if ((tid_len + 24) != cmd->data_length) { @@ -3470,7 +3470,7 @@ static int core_scsi3_emulate_pro_register_and_move( return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); proto_ident = (buf[24] & 0x0f); #if 0 pr_debug("SPC-3 PR REGISTER_AND_MOVE: Extracted Protocol Identifier:" @@ -3504,7 +3504,7 @@ static int core_scsi3_emulate_pro_register_and_move( goto out; } - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); buf = NULL; pr_debug("SPC-3 PR [%s] Extracted initiator %s identifier: %s" @@ -3769,13 +3769,13 @@ after_iport_check: " REGISTER_AND_MOVE\n"); } - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); core_scsi3_put_pr_reg(dest_pr_reg); return 0; out: if (buf) - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); if (dest_se_deve) core_scsi3_lunacl_undepend_item(dest_se_deve); if (dest_node_acl) @@ -3849,7 +3849,7 @@ int target_scsi3_emulate_pr_out(struct se_task *task) scope = (cdb[2] & 0xf0); type = (cdb[2] & 0x0f); - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); /* * From PERSISTENT_RESERVE_OUT parameter list (payload) */ @@ -3867,7 +3867,7 @@ int target_scsi3_emulate_pr_out(struct se_task *task) aptpl = (buf[17] & 0x01); unreg = (buf[17] & 0x02); } - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); buf = NULL; /* @@ -3967,7 +3967,7 @@ static int core_scsi3_pri_read_keys(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff); buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff); buf[2] = ((su_dev->t10_pr.pr_generation >> 8) & 0xff); @@ -4001,7 +4001,7 @@ static int core_scsi3_pri_read_keys(struct se_cmd *cmd) buf[6] = ((add_len >> 8) & 0xff); buf[7] = (add_len & 0xff); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } @@ -4027,7 +4027,7 @@ static int core_scsi3_pri_read_reservation(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff); buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff); buf[2] = ((su_dev->t10_pr.pr_generation >> 8) & 0xff); @@ -4086,7 +4086,7 @@ static int core_scsi3_pri_read_reservation(struct se_cmd *cmd) err: spin_unlock(&se_dev->dev_reservation_lock); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } @@ -4110,7 +4110,7 @@ static int core_scsi3_pri_report_capabilities(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = ((add_len << 8) & 0xff); buf[1] = (add_len & 0xff); @@ -4142,7 +4142,7 @@ static int core_scsi3_pri_report_capabilities(struct se_cmd *cmd) buf[4] |= 0x02; /* PR_TYPE_WRITE_EXCLUSIVE */ buf[5] |= 0x01; /* PR_TYPE_EXCLUSIVE_ACCESS_ALLREG */ - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } @@ -4172,7 +4172,7 @@ static int core_scsi3_pri_read_full_status(struct se_cmd *cmd) return -EINVAL; } - buf = transport_kmap_first_data_page(cmd); + buf = transport_kmap_data_sg(cmd); buf[0] = ((su_dev->t10_pr.pr_generation >> 24) & 0xff); buf[1] = ((su_dev->t10_pr.pr_generation >> 16) & 0xff); @@ -4293,7 +4293,7 @@ static int core_scsi3_pri_read_full_status(struct se_cmd *cmd) buf[6] = ((add_len >> 8) & 0xff); buf[7] = (add_len & 0xff); - transport_kunmap_first_data_page(cmd); + transport_kunmap_data_sg(cmd); return 0; } diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index d35467d42e12..8d4def30e9e8 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -693,7 +693,7 @@ static int pscsi_transport_complete(struct se_task *task) if (task->task_se_cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY) { - unsigned char *buf = transport_kmap_first_data_page(task->task_se_cmd); + unsigned char *buf = transport_kmap_data_sg(task->task_se_cmd); if (cdb[0] == MODE_SENSE_10) { if (!(buf[3] & 0x80)) @@ -703,7 +703,7 @@ static int pscsi_transport_complete(struct se_task *task) buf[2] |= 0x80; } - transport_kunmap_first_data_page(task->task_se_cmd); + transport_kunmap_data_sg(task->task_se_cmd); } } after_mode_sense: diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index e186f7db3860..cf996d81cfcb 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -3084,11 +3084,6 @@ static int transport_generic_cmd_sequencer( (cmd->se_cmd_flags & SCF_SCSI_DATA_SG_IO_CDB))) goto out_unsupported_cdb; - /* Let's limit control cdbs to a page, for simplicity's sake. */ - if ((cmd->se_cmd_flags & SCF_SCSI_CONTROL_SG_IO_CDB) && - size > PAGE_SIZE) - goto out_invalid_cdb_field; - transport_set_supported_SAM_opcode(cmd); return ret; @@ -3492,9 +3487,11 @@ int transport_generic_map_mem_to_cmd( } EXPORT_SYMBOL(transport_generic_map_mem_to_cmd); -void *transport_kmap_first_data_page(struct se_cmd *cmd) +void *transport_kmap_data_sg(struct se_cmd *cmd) { struct scatterlist *sg = cmd->t_data_sg; + struct page **pages; + int i; BUG_ON(!sg); /* @@ -3502,15 +3499,41 @@ void *transport_kmap_first_data_page(struct se_cmd *cmd) * tcm_loop who may be using a contig buffer from the SCSI midlayer for * control CDBs passed as SGLs via transport_generic_map_mem_to_cmd() */ - return kmap(sg_page(sg)) + sg->offset; + if (!cmd->t_data_nents) + return NULL; + else if (cmd->t_data_nents == 1) + return kmap(sg_page(sg)) + sg->offset; + + /* >1 page. use vmap */ + pages = kmalloc(sizeof(*pages) * cmd->t_data_nents, GFP_KERNEL); + if (!pages) + return NULL; + + /* convert sg[] to pages[] */ + for_each_sg(cmd->t_data_sg, sg, cmd->t_data_nents, i) { + pages[i] = sg_page(sg); + } + + cmd->t_data_vmap = vmap(pages, cmd->t_data_nents, VM_MAP, PAGE_KERNEL); + kfree(pages); + if (!cmd->t_data_vmap) + return NULL; + + return cmd->t_data_vmap + cmd->t_data_sg[0].offset; } -EXPORT_SYMBOL(transport_kmap_first_data_page); +EXPORT_SYMBOL(transport_kmap_data_sg); -void transport_kunmap_first_data_page(struct se_cmd *cmd) +void transport_kunmap_data_sg(struct se_cmd *cmd) { - kunmap(sg_page(cmd->t_data_sg)); + if (!cmd->t_data_nents) + return; + else if (cmd->t_data_nents == 1) + kunmap(sg_page(cmd->t_data_sg)); + + vunmap(cmd->t_data_vmap); + cmd->t_data_vmap = NULL; } -EXPORT_SYMBOL(transport_kunmap_first_data_page); +EXPORT_SYMBOL(transport_kunmap_data_sg); static int transport_generic_get_mem(struct se_cmd *cmd) diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h index 4866499bdeeb..e5e6ff98f0fa 100644 --- a/include/target/target_core_backend.h +++ b/include/target/target_core_backend.h @@ -59,7 +59,7 @@ int transport_set_vpd_ident_type(struct t10_vpd *, unsigned char *); int transport_set_vpd_ident(struct t10_vpd *, unsigned char *); /* core helpers also used by command snooping in pscsi */ -void *transport_kmap_first_data_page(struct se_cmd *); -void transport_kunmap_first_data_page(struct se_cmd *); +void *transport_kmap_data_sg(struct se_cmd *); +void transport_kunmap_data_sg(struct se_cmd *); #endif /* TARGET_CORE_BACKEND_H */ diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index daf532bc721a..dc4e345a0163 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -582,6 +582,7 @@ struct se_cmd { struct scatterlist *t_data_sg; unsigned int t_data_nents; + void *t_data_vmap; struct scatterlist *t_bidi_data_sg; unsigned int t_bidi_data_nents; -- GitLab From 2f9bc894c67dbacae5a6a9875818d2a18a918d18 Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Mon, 16 Jan 2012 23:33:48 -0800 Subject: [PATCH 0044/1359] iscsi-target: Fix discovery with INADDR_ANY and IN6ADDR_ANY_INIT This patch addresses a bug with sendtargets discovery where INADDR_ANY (0.0.0.0) + IN6ADDR_ANY_INIT ([0:0:0:0:0:0:0:0]) network portals where incorrectly being reported back to initiators instead of the address of the connecting interface. To address this, save local socket ->getname() output during iscsi login setup, and makes iscsit_build_sendtargets_response() return these TargetAddress keys when INADDR_ANY or IN6ADDR_ANY_INIT portals are in use. Reported-by: Dax Kelson Reported-by: Andy Grover Cc: David S. Miller Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/iscsi/iscsi_target.c | 37 ++++++++++++++++++++--- drivers/target/iscsi/iscsi_target_core.h | 2 ++ drivers/target/iscsi/iscsi_target_login.c | 31 ++++++++++++++++--- 3 files changed, 62 insertions(+), 8 deletions(-) diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c index 6e070e0a8393..44262908def5 100644 --- a/drivers/target/iscsi/iscsi_target.c +++ b/drivers/target/iscsi/iscsi_target.c @@ -3164,6 +3164,30 @@ static int iscsit_send_task_mgt_rsp( return 0; } +static bool iscsit_check_inaddr_any(struct iscsi_np *np) +{ + bool ret = false; + + if (np->np_sockaddr.ss_family == AF_INET6) { + const struct sockaddr_in6 sin6 = { + .sin6_addr = IN6ADDR_ANY_INIT }; + struct sockaddr_in6 *sock_in6 = + (struct sockaddr_in6 *)&np->np_sockaddr; + + if (!memcmp(sock_in6->sin6_addr.s6_addr, + sin6.sin6_addr.s6_addr, 16)) + ret = true; + } else { + struct sockaddr_in * sock_in = + (struct sockaddr_in *)&np->np_sockaddr; + + if (sock_in->sin_addr.s_addr == INADDR_ANY) + ret = true; + } + + return ret; +} + static int iscsit_build_sendtargets_response(struct iscsi_cmd *cmd) { char *payload = NULL; @@ -3213,12 +3237,17 @@ static int iscsit_build_sendtargets_response(struct iscsi_cmd *cmd) spin_lock(&tpg->tpg_np_lock); list_for_each_entry(tpg_np, &tpg->tpg_gnp_list, tpg_np_list) { + struct iscsi_np *np = tpg_np->tpg_np; + bool inaddr_any = iscsit_check_inaddr_any(np); + len = sprintf(buf, "TargetAddress=" "%s%s%s:%hu,%hu", - (tpg_np->tpg_np->np_sockaddr.ss_family == AF_INET6) ? - "[" : "", tpg_np->tpg_np->np_ip, - (tpg_np->tpg_np->np_sockaddr.ss_family == AF_INET6) ? - "]" : "", tpg_np->tpg_np->np_port, + (np->np_sockaddr.ss_family == AF_INET6) ? + "[" : "", (inaddr_any == false) ? + np->np_ip : conn->local_ip, + (np->np_sockaddr.ss_family == AF_INET6) ? + "]" : "", (inaddr_any == false) ? + np->np_port : conn->local_port, tpg->tpgt); len += 1; diff --git a/drivers/target/iscsi/iscsi_target_core.h b/drivers/target/iscsi/iscsi_target_core.h index ebf81fdbb5c5..0ec3b77a0c27 100644 --- a/drivers/target/iscsi/iscsi_target_core.h +++ b/drivers/target/iscsi/iscsi_target_core.h @@ -508,6 +508,7 @@ struct iscsi_conn { u16 cid; /* Remote TCP Port */ u16 login_port; + u16 local_port; int net_size; u32 auth_id; #define CONNFLAG_SCTP_STRUCT_FILE 0x01 @@ -527,6 +528,7 @@ struct iscsi_conn { unsigned char bad_hdr[ISCSI_HDR_LEN]; #define IPV6_ADDRESS_SPACE 48 unsigned char login_ip[IPV6_ADDRESS_SPACE]; + unsigned char local_ip[IPV6_ADDRESS_SPACE]; int conn_usage_count; int conn_waiting_on_uc; atomic_t check_immediate_queue; diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index 373b0cc6abd8..ec47a7c5966e 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -615,8 +615,8 @@ static int iscsi_post_login_handler( } pr_debug("iSCSI Login successful on CID: %hu from %s to" - " %s:%hu,%hu\n", conn->cid, conn->login_ip, np->np_ip, - np->np_port, tpg->tpgt); + " %s:%hu,%hu\n", conn->cid, conn->login_ip, + conn->local_ip, conn->local_port, tpg->tpgt); list_add_tail(&conn->conn_list, &sess->sess_conn_list); atomic_inc(&sess->nconn); @@ -658,7 +658,8 @@ static int iscsi_post_login_handler( sess->session_state = TARG_SESS_STATE_LOGGED_IN; pr_debug("iSCSI Login successful on CID: %hu from %s to %s:%hu,%hu\n", - conn->cid, conn->login_ip, np->np_ip, np->np_port, tpg->tpgt); + conn->cid, conn->login_ip, conn->local_ip, conn->local_port, + tpg->tpgt); spin_lock_bh(&sess->conn_lock); list_add_tail(&conn->conn_list, &sess->sess_conn_list); @@ -1020,6 +1021,18 @@ static int __iscsi_target_login_thread(struct iscsi_np *np) snprintf(conn->login_ip, sizeof(conn->login_ip), "%pI6c", &sock_in6.sin6_addr.in6_u); conn->login_port = ntohs(sock_in6.sin6_port); + + if (conn->sock->ops->getname(conn->sock, + (struct sockaddr *)&sock_in6, &err, 0) < 0) { + pr_err("sock_ops->getname() failed.\n"); + iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, + ISCSI_LOGIN_STATUS_TARGET_ERROR); + goto new_sess_out; + } + snprintf(conn->local_ip, sizeof(conn->local_ip), "%pI6c", + &sock_in6.sin6_addr.in6_u); + conn->local_port = ntohs(sock_in6.sin6_port); + } else { memset(&sock_in, 0, sizeof(struct sockaddr_in)); @@ -1032,6 +1045,16 @@ static int __iscsi_target_login_thread(struct iscsi_np *np) } sprintf(conn->login_ip, "%pI4", &sock_in.sin_addr.s_addr); conn->login_port = ntohs(sock_in.sin_port); + + if (conn->sock->ops->getname(conn->sock, + (struct sockaddr *)&sock_in, &err, 0) < 0) { + pr_err("sock_ops->getname() failed.\n"); + iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, + ISCSI_LOGIN_STATUS_TARGET_ERROR); + goto new_sess_out; + } + sprintf(conn->local_ip, "%pI4", &sock_in.sin_addr.s_addr); + conn->local_port = ntohs(sock_in.sin_port); } conn->network_transport = np->np_network_transport; @@ -1039,7 +1062,7 @@ static int __iscsi_target_login_thread(struct iscsi_np *np) pr_debug("Received iSCSI login request from %s on %s Network" " Portal %s:%hu\n", conn->login_ip, (conn->network_transport == ISCSI_TCP) ? "TCP" : "SCTP", - np->np_ip, np->np_port); + conn->local_ip, conn->local_port); pr_debug("Moving to TARG_CONN_STATE_IN_LOGIN.\n"); conn->conn_state = TARG_CONN_STATE_IN_LOGIN; -- GitLab From bb1acb2ee038a6c13ee99e0b9fb44dacb4a9de84 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 17 Jan 2012 18:00:56 -0800 Subject: [PATCH 0045/1359] target: Return correct ASC for unimplemented VPD pages My draft of SPC-4 says: If the device server does not implement the requested vital product data page, then the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB. Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_cdb.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 07a3025d0622..370ad13930a4 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -729,7 +729,7 @@ int target_emulate_inquiry(struct se_task *task) } pr_err("Unknown VPD Code: 0x%02x\n", cdb[2]); - cmd->scsi_sense_reason = TCM_UNSUPPORTED_SCSI_OPCODE; + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; ret = -EINVAL; out_unmap: -- GitLab From bf0053550aebe56f3bb5dd793e9de69238b5b945 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 17 Jan 2012 18:00:57 -0800 Subject: [PATCH 0046/1359] target: Fail INQUIRY commands with EVPD==0 but PAGE CODE!=0 My draft of SPC-4 says: If the PAGE CODE field is not set to zero when the EVPD bit is set to zero, the command shall be terminated with CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB. Signed-off-by: Roland Dreier Cc: Signed-off-by: Nicholas Bellinger --- drivers/target/target_core_cdb.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 370ad13930a4..a9bbf5a5cc27 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -698,6 +698,13 @@ int target_emulate_inquiry(struct se_task *task) int p, ret; if (!(cdb[1] & 0x1)) { + if (cdb[2]) { + pr_err("INQUIRY with EVPD==0 but PAGE CODE=%02x\n", + cdb[2]); + cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; + } + ret = target_emulate_inquiry_std(cmd); goto out; } -- GitLab From 482835ce02726652becc36b64522cbabc0adbeee Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 18 Jan 2012 10:24:17 +0100 Subject: [PATCH 0047/1359] sh: sh7757lcr: update to the new MMCIF DMA configuration Specifying MMCIF DMA slave IDs via a struct sh_mmcif_dma instance is deprecated. Update sh7757lcr to specify slave IDs embedded in struct sh_mmcif_plat_data. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/sh/boards/board-sh7757lcr.c | 12 ++---------- 1 file changed, 2 insertions(+), 10 deletions(-) diff --git a/arch/sh/boards/board-sh7757lcr.c b/arch/sh/boards/board-sh7757lcr.c index 33dc5b6e8e17..8d2ae109a83a 100644 --- a/arch/sh/boards/board-sh7757lcr.c +++ b/arch/sh/boards/board-sh7757lcr.c @@ -210,21 +210,13 @@ static struct resource sh_mmcif_resources[] = { }, }; -static struct sh_mmcif_dma sh7757lcr_mmcif_dma = { - .chan_priv_tx = { - .slave_id = SHDMA_SLAVE_MMCIF_TX, - }, - .chan_priv_rx = { - .slave_id = SHDMA_SLAVE_MMCIF_RX, - } -}; - static struct sh_mmcif_plat_data sh_mmcif_plat = { - .dma = &sh7757lcr_mmcif_dma, .sup_pclk = 0x0f, .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE, .ocr = MMC_VDD_32_33 | MMC_VDD_33_34, + .slave_id_tx = SHDMA_SLAVE_MMCIF_TX, + .slave_id_rx = SHDMA_SLAVE_MMCIF_RX, }; static struct platform_device sh_mmcif_device = { -- GitLab From 833218f16b1fbfdff0dbb9ac477cf0c6e85cd4f5 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 18 Jan 2012 01:44:22 -0800 Subject: [PATCH 0048/1359] sh: clock-sh7724: fixup sh_fsi clock settings sh_fsi needs HWBLK_SPU clock on sh7724 Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/sh/kernel/cpu/sh4a/clock-sh7724.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c index b3c039a5064a..70bd96646f42 100644 --- a/arch/sh/kernel/cpu/sh4a/clock-sh7724.c +++ b/arch/sh/kernel/cpu/sh4a/clock-sh7724.c @@ -343,7 +343,7 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh_mobile_ceu.1", &mstp_clks[HWBLK_CEU1]), CLKDEV_CON_ID("beu1", &mstp_clks[HWBLK_BEU1]), CLKDEV_CON_ID("2ddmac0", &mstp_clks[HWBLK_2DDMAC]), - CLKDEV_CON_ID("spu0", &mstp_clks[HWBLK_SPU]), + CLKDEV_DEV_ID("sh_fsi.0", &mstp_clks[HWBLK_SPU]), CLKDEV_CON_ID("jpu0", &mstp_clks[HWBLK_JPU]), CLKDEV_DEV_ID("sh-vou.0", &mstp_clks[HWBLK_VOU]), CLKDEV_CON_ID("beu0", &mstp_clks[HWBLK_BEU0]), -- GitLab From e0a15d5bf4e2fc46a867c43c41b6a41622f673ad Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 18 Jan 2012 18:03:39 +0100 Subject: [PATCH 0049/1359] [S390] cleanup entry point definition The vmlinux file for s390 contains a currently unused entry point, which is specified in two different locations: the linker script and the makefile. As it happens both definitions are different and the linker file is broken (_start does not exist) and the makefile specifies an entry point which makes no sense (the SALIPL loader entry point). So lets get rid of one definition (the makefile) and use the entry point of all other ipl methods (0x10000 -> startup) to be consistent. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky --- arch/s390/Makefile | 1 - arch/s390/kernel/vmlinux.lds.S | 4 ++-- 2 files changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/s390/Makefile b/arch/s390/Makefile index e9f353341693..0ad2f1e1ce9e 100644 --- a/arch/s390/Makefile +++ b/arch/s390/Makefile @@ -88,7 +88,6 @@ KBUILD_CFLAGS += -pipe -fno-strength-reduce -Wno-sign-compare KBUILD_AFLAGS += $(aflags-y) OBJCOPYFLAGS := -O binary -LDFLAGS_vmlinux := -e start head-y := arch/s390/kernel/head.o head-y += arch/s390/kernel/$(if $(CONFIG_64BIT),head64.o,head31.o) diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S index e4c79ebb40e6..21109c63eb12 100644 --- a/arch/s390/kernel/vmlinux.lds.S +++ b/arch/s390/kernel/vmlinux.lds.S @@ -9,12 +9,12 @@ #ifndef CONFIG_64BIT OUTPUT_FORMAT("elf32-s390", "elf32-s390", "elf32-s390") OUTPUT_ARCH(s390) -ENTRY(_start) +ENTRY(startup) jiffies = jiffies_64 + 4; #else OUTPUT_FORMAT("elf64-s390", "elf64-s390", "elf64-s390") OUTPUT_ARCH(s390:64-bit) -ENTRY(_start) +ENTRY(startup) jiffies = jiffies_64; #endif -- GitLab From f9f8d02fae0dc47d8868fd069bb88d12f8d1d71f Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Wed, 18 Jan 2012 18:03:40 +0100 Subject: [PATCH 0050/1359] [S390] dasd: revert LCU optimization Remove the optimization that validate server is only called once per LCU. If a device is set online we only know that we already know the LCU. But if the pathgroup was lost in between we have to do a validate server again to activate some features. Since we have no indication when a pathgroup gets lost we have to do a validate server every time a device is set online. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd_alias.c | 64 +-------------------------------- drivers/s390/block/dasd_eckd.c | 41 ++++++++------------- 2 files changed, 16 insertions(+), 89 deletions(-) diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index 553b3c5abb0a..b3beed5434e4 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -189,14 +189,12 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device) unsigned long flags; struct alias_server *server, *newserver; struct alias_lcu *lcu, *newlcu; - int is_lcu_known; struct dasd_uid uid; private = (struct dasd_eckd_private *) device->private; device->discipline->get_uid(device, &uid); spin_lock_irqsave(&aliastree.lock, flags); - is_lcu_known = 1; server = _find_server(&uid); if (!server) { spin_unlock_irqrestore(&aliastree.lock, flags); @@ -208,7 +206,6 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device) if (!server) { list_add(&newserver->server, &aliastree.serverlist); server = newserver; - is_lcu_known = 0; } else { /* someone was faster */ _free_server(newserver); @@ -226,12 +223,10 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device) if (!lcu) { list_add(&newlcu->lcu, &server->lculist); lcu = newlcu; - is_lcu_known = 0; } else { /* someone was faster */ _free_lcu(newlcu); } - is_lcu_known = 0; } spin_lock(&lcu->lock); list_add(&device->alias_list, &lcu->inactive_devices); @@ -239,64 +234,7 @@ int dasd_alias_make_device_known_to_lcu(struct dasd_device *device) spin_unlock(&lcu->lock); spin_unlock_irqrestore(&aliastree.lock, flags); - return is_lcu_known; -} - -/* - * The first device to be registered on an LCU will have to do - * some additional setup steps to configure that LCU on the - * storage server. All further devices should wait with their - * initialization until the first device is done. - * To synchronize this work, the first device will call - * dasd_alias_lcu_setup_complete when it is done, and all - * other devices will wait for it with dasd_alias_wait_for_lcu_setup. - */ -void dasd_alias_lcu_setup_complete(struct dasd_device *device) -{ - unsigned long flags; - struct alias_server *server; - struct alias_lcu *lcu; - struct dasd_uid uid; - - device->discipline->get_uid(device, &uid); - lcu = NULL; - spin_lock_irqsave(&aliastree.lock, flags); - server = _find_server(&uid); - if (server) - lcu = _find_lcu(server, &uid); - spin_unlock_irqrestore(&aliastree.lock, flags); - if (!lcu) { - DBF_EVENT_DEVID(DBF_ERR, device->cdev, - "could not find lcu for %04x %02x", - uid.ssid, uid.real_unit_addr); - WARN_ON(1); - return; - } - complete_all(&lcu->lcu_setup); -} - -void dasd_alias_wait_for_lcu_setup(struct dasd_device *device) -{ - unsigned long flags; - struct alias_server *server; - struct alias_lcu *lcu; - struct dasd_uid uid; - - device->discipline->get_uid(device, &uid); - lcu = NULL; - spin_lock_irqsave(&aliastree.lock, flags); - server = _find_server(&uid); - if (server) - lcu = _find_lcu(server, &uid); - spin_unlock_irqrestore(&aliastree.lock, flags); - if (!lcu) { - DBF_EVENT_DEVID(DBF_ERR, device->cdev, - "could not find lcu for %04x %02x", - uid.ssid, uid.real_unit_addr); - WARN_ON(1); - return; - } - wait_for_completion(&lcu->lcu_setup); + return 0; } /* diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index bbcd5e9206ee..1b6e7ea9347f 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -1534,6 +1534,10 @@ static void dasd_eckd_validate_server(struct dasd_device *device) struct dasd_eckd_private *private; int enable_pav; + private = (struct dasd_eckd_private *) device->private; + if (private->uid.type == UA_BASE_PAV_ALIAS || + private->uid.type == UA_HYPER_PAV_ALIAS) + return; if (dasd_nopav || MACHINE_IS_VM) enable_pav = 0; else @@ -1542,7 +1546,6 @@ static void dasd_eckd_validate_server(struct dasd_device *device) /* may be requested feature is not available on server, * therefore just report error and go ahead */ - private = (struct dasd_eckd_private *) device->private; DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "PSF-SSC for SSID %04x " "returned rc=%d", private->uid.ssid, rc); } @@ -1588,7 +1591,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device) struct dasd_eckd_private *private; struct dasd_block *block; struct dasd_uid temp_uid; - int is_known, rc, i; + int rc, i; int readonly; unsigned long value; @@ -1651,22 +1654,12 @@ dasd_eckd_check_characteristics(struct dasd_device *device) block->base = device; } - /* register lcu with alias handling, enable PAV if this is a new lcu */ - is_known = dasd_alias_make_device_known_to_lcu(device); - if (is_known < 0) { - rc = is_known; + /* register lcu with alias handling, enable PAV */ + rc = dasd_alias_make_device_known_to_lcu(device); + if (rc) goto out_err2; - } - /* - * dasd_eckd_validate_server is done on the first device that - * is found for an LCU. All later other devices have to wait - * for it, so they will read the correct feature codes. - */ - if (!is_known) { - dasd_eckd_validate_server(device); - dasd_alias_lcu_setup_complete(device); - } else - dasd_alias_wait_for_lcu_setup(device); + + dasd_eckd_validate_server(device); /* device may report different configuration data after LCU setup */ rc = dasd_eckd_read_conf(device); @@ -4098,7 +4091,7 @@ static int dasd_eckd_restore_device(struct dasd_device *device) { struct dasd_eckd_private *private; struct dasd_eckd_characteristics temp_rdc_data; - int is_known, rc; + int rc; struct dasd_uid temp_uid; unsigned long flags; @@ -4121,14 +4114,10 @@ static int dasd_eckd_restore_device(struct dasd_device *device) goto out_err; /* register lcu with alias handling, enable PAV if this is a new lcu */ - is_known = dasd_alias_make_device_known_to_lcu(device); - if (is_known < 0) - return is_known; - if (!is_known) { - dasd_eckd_validate_server(device); - dasd_alias_lcu_setup_complete(device); - } else - dasd_alias_wait_for_lcu_setup(device); + rc = dasd_alias_make_device_known_to_lcu(device); + if (rc) + return rc; + dasd_eckd_validate_server(device); /* RE-Read Configuration Data */ rc = dasd_eckd_read_conf(device); -- GitLab From f16330316321d1c388d13096f6858f5d2dac29dc Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Wed, 18 Jan 2012 18:03:41 +0100 Subject: [PATCH 0051/1359] [S390] dasd: revalidate server for new pathgroup If a pathgroup is established we get an event and have to revalidate the server to propagate supported features like PAV and enable them. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky --- drivers/s390/block/dasd.c | 6 ++++++ drivers/s390/block/dasd_eckd.c | 22 ++++++++++++++++++++++ drivers/s390/block/dasd_int.h | 2 ++ 3 files changed, 30 insertions(+) diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index eef27a197c00..110137e7ec81 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -3261,6 +3261,12 @@ void dasd_generic_path_event(struct ccw_device *cdev, int *path_event) device->path_data.tbvpm |= eventlpm; dasd_schedule_device_bh(device); } + if (path_event[chp] & PE_PATHGROUP_ESTABLISHED) { + DBF_DEV_EVENT(DBF_WARNING, device, "%s", + "Pathgroup re-established\n"); + if (device->discipline->kick_validate) + device->discipline->kick_validate(device); + } } dasd_put_device(device); } diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 1b6e7ea9347f..70880be26015 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -1550,6 +1550,24 @@ static void dasd_eckd_validate_server(struct dasd_device *device) "returned rc=%d", private->uid.ssid, rc); } +/* + * worker to do a validate server in case of a lost pathgroup + */ +static void dasd_eckd_do_validate_server(struct work_struct *work) +{ + struct dasd_device *device = container_of(work, struct dasd_device, + kick_validate); + dasd_eckd_validate_server(device); + dasd_put_device(device); +} + +static void dasd_eckd_kick_validate_server(struct dasd_device *device) +{ + dasd_get_device(device); + /* queue call to do_validate_server to the kernel event daemon. */ + schedule_work(&device->kick_validate); +} + static u32 get_fcx_max_data(struct dasd_device *device) { #if defined(CONFIG_64BIT) @@ -1595,6 +1613,9 @@ dasd_eckd_check_characteristics(struct dasd_device *device) int readonly; unsigned long value; + /* setup work queue for validate server*/ + INIT_WORK(&device->kick_validate, dasd_eckd_do_validate_server); + if (!ccw_device_is_pathgroup(device->cdev)) { dev_warn(&device->cdev->dev, "A channel path group could not be established\n"); @@ -4259,6 +4280,7 @@ static struct dasd_discipline dasd_eckd_discipline = { .restore = dasd_eckd_restore_device, .reload = dasd_eckd_reload_device, .get_uid = dasd_eckd_get_uid, + .kick_validate = dasd_eckd_kick_validate_server, }; static int __init diff --git a/drivers/s390/block/dasd_int.h b/drivers/s390/block/dasd_int.h index afe8c33422ed..33a6743ddc55 100644 --- a/drivers/s390/block/dasd_int.h +++ b/drivers/s390/block/dasd_int.h @@ -355,6 +355,7 @@ struct dasd_discipline { int (*reload) (struct dasd_device *); int (*get_uid) (struct dasd_device *, struct dasd_uid *); + void (*kick_validate) (struct dasd_device *); }; extern struct dasd_discipline *dasd_diag_discipline_pointer; @@ -455,6 +456,7 @@ struct dasd_device { struct work_struct kick_work; struct work_struct restore_device; struct work_struct reload_device; + struct work_struct kick_validate; struct timer_list timer; debug_info_t *debug_area; -- GitLab From 0ada2da51800a4914887a9bcf22d563be80e50be Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 18 Jan 2012 17:32:05 -0800 Subject: [PATCH 0052/1359] ARM: mach-shmobile: mackerel: use renesas_usbhs instead of r8a66597_hcd Current renesas_usbhs driver can use both USB host/gadget. This patch removes current r8a66597_hcd driver settings, and adds renesas_usbhs host driver settings for mackerel USB1 port. You can still use this port as "gadget" with small modify. Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-mackerel.c | 73 +++---------------------- 1 file changed, 9 insertions(+), 64 deletions(-) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index 9b42fbd10f8e..f0cc307df640 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include @@ -145,11 +144,6 @@ * 1-2 short | VBUS 5V | Host * open | external VBUS | Function * - * *1 - * CN31 is used as - * CONFIG_USB_R8A66597_HCD Host - * CONFIG_USB_RENESAS_USBHS Function - * * CAUTION * * renesas_usbhs driver can use external interrupt mode @@ -161,15 +155,6 @@ * mackerel can not use external interrupt (IRQ7-PORT167) mode on "USB0", * because Touchscreen is using IRQ7-PORT40. * It is impossible to use IRQ7 demux on this board. - * - * We can use external interrupt mode USB-Function on "USB1". - * USB1 can become Host by r8a66597, and become Function by renesas_usbhs. - * But don't select both drivers in same time. - * These uses same IRQ number for request_irq(), and aren't supporting - * IRQF_SHARED / IORESOURCE_IRQ_SHAREABLE. - * - * Actually these are old/new version of USB driver. - * This mean its register will be broken if it supports shared IRQ, */ /* @@ -676,51 +661,16 @@ static struct platform_device usbhs0_device = { * Use J30 to select between Host and Function. This setting * can however not be detected by software. Hotplug of USBHS1 * is provided via IRQ8. + * + * Current USB1 works as "USB Host". + * - set J30 "short" + * + * If you want to use it as "USB gadget", + * - J30 "open" + * - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET + * - add .get_vbus = usbhs_get_vbus in usbhs1_private */ #define IRQ8 evt2irq(0x0300) - -/* USBHS1 USB Host support via r8a66597_hcd */ -static void usb1_host_port_power(int port, int power) -{ - if (!power) /* only power-on is supported for now */ - return; - - /* set VBOUT/PWEN and EXTLP1 in DVSTCTR */ - __raw_writew(__raw_readw(0xE68B0008) | 0x600, 0xE68B0008); -} - -static struct r8a66597_platdata usb1_host_data = { - .on_chip = 1, - .port_power = usb1_host_port_power, -}; - -static struct resource usb1_host_resources[] = { - [0] = { - .name = "USBHS1", - .start = 0xe68b0000, - .end = 0xe68b00e6 - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = evt2irq(0x1ce0) /* USB1_USB1I0 */, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device usb1_host_device = { - .name = "r8a66597_hcd", - .id = 1, - .dev = { - .dma_mask = NULL, /* not use dma */ - .coherent_dma_mask = 0xffffffff, - .platform_data = &usb1_host_data, - }, - .num_resources = ARRAY_SIZE(usb1_host_resources), - .resource = usb1_host_resources, -}; - -/* USBHS1 USB Function support via renesas_usbhs */ - #define USB_PHY_MODE (1 << 4) #define USB_PHY_INT_EN ((1 << 3) | (1 << 2)) #define USB_PHY_ON (1 << 1) @@ -776,7 +726,7 @@ static void usbhs1_hardware_exit(struct platform_device *pdev) static int usbhs1_get_id(struct platform_device *pdev) { - return USBHS_GADGET; + return USBHS_HOST; } static u32 usbhs1_pipe_cfg[] = { @@ -807,7 +757,6 @@ static struct usbhs_private usbhs1_private = { .hardware_exit = usbhs1_hardware_exit, .get_id = usbhs1_get_id, .phy_reset = usbhs_phy_reset, - .get_vbus = usbhs_get_vbus, }, .driver_param = { .buswait_bwait = 4, @@ -1311,7 +1260,6 @@ static struct platform_device *mackerel_devices[] __initdata = { &nor_flash_device, &smc911x_device, &lcdc_device, - &usb1_host_device, &usbhs1_device, &usbhs0_device, &leds_device, @@ -1473,9 +1421,6 @@ static void __init mackerel_init(void) gpio_pull_down(GPIO_PORT167CR); /* VBUS0_1 pull down */ gpio_request(GPIO_FN_IDIN_1_113, NULL); - /* USB phy tweak to make the r8a66597_hcd host driver work */ - __raw_writew(0x8a0a, 0xe6058130); /* USBCR4 */ - /* enable FSI2 port A (ak4643) */ gpio_request(GPIO_FN_FSIAIBT, NULL); gpio_request(GPIO_FN_FSIAILR, NULL); -- GitLab From 6d9b7dd0da1b619ed5f89ff7ab4bc3188c0f7e9f Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 18 Jan 2012 16:37:07 -0800 Subject: [PATCH 0053/1359] ARM: mach-shmobile: mackerel: add ak4642 amixer settings on comment current ak4642 needs amixer settings for playing which was not needed on old kernel. This patch show it on comment area Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-mackerel.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c index f0cc307df640..c4a6a9b16d1b 100644 --- a/arch/arm/mach-shmobile/board-mackerel.c +++ b/arch/arm/mach-shmobile/board-mackerel.c @@ -192,6 +192,16 @@ * */ +/* + * FSI - AK4642 + * + * it needs amixer settings for playing + * + * amixer set "Headphone" on + * amixer set "HPOUTL Mixer DACH" on + * amixer set "HPOUTR Mixer DACH" on + */ + /* * FIXME !! * -- GitLab From df0793abb929e66606fa25f3875ff1b89de5ad32 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 19 Jan 2012 09:20:09 +0100 Subject: [PATCH 0054/1359] block,cfq: change code order cfq_slice_expired will change saved_workload_slice. It should be called first so saved_workload_slice is correctly set to 0 after workload type is changed. This fixes the code order changed by 54b466e44b1c7. Tested-by: Tetsuo Handa Signed-off-by: Shaohua Li Signed-off-by: Jens Axboe --- block/cfq-iosched.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index ee55019066a1..da21c24dbed3 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -3117,17 +3117,18 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, */ static void cfq_preempt_queue(struct cfq_data *cfqd, struct cfq_queue *cfqq) { + enum wl_type_t old_type = cfqq_type(cfqd->active_queue); + cfq_log_cfqq(cfqd, cfqq, "preempt"); + cfq_slice_expired(cfqd, 1); /* * workload type is changed, don't save slice, otherwise preempt * doesn't happen */ - if (cfqq_type(cfqd->active_queue) != cfqq_type(cfqq)) + if (old_type != cfqq_type(cfqq)) cfqq->cfqg->saved_workload_slice = 0; - cfq_slice_expired(cfqd, 1); - /* * Put the new queue at the front of the of the current list, * so we know that it will be selected next. -- GitLab From 05c30b9551f1904d9950ad0d28e65fc4ff3c8a8e Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Thu, 19 Jan 2012 09:20:10 +0100 Subject: [PATCH 0055/1359] block: fix NULL icq_cache reference Vivek reported a kernel crash: [ 94.217015] BUG: unable to handle kernel NULL pointer dereference at 000000000000001c [ 94.218004] IP: [] kmem_cache_free+0x5e/0x200 [ 94.218004] PGD 13abda067 PUD 137d52067 PMD 0 [ 94.218004] Oops: 0000 [#1] SMP DEBUG_PAGEALLOC [ 94.218004] CPU 0 [ 94.218004] Modules linked in: [last unloaded: scsi_wait_scan] [ 94.218004] [ 94.218004] Pid: 0, comm: swapper/0 Not tainted 3.2.0+ #16 Hewlett-Packard HP xw6600 Workstation/0A9Ch [ 94.218004] RIP: 0010:[] [] kmem_cache_free+0x5e/0x200 [ 94.218004] RSP: 0018:ffff88013fc03de0 EFLAGS: 00010006 [ 94.218004] RAX: ffffffff81e0d020 RBX: ffff880138b3c680 RCX: 00000001801c001b [ 94.218004] RDX: 00000000003aac1d RSI: ffff880138b3c680 RDI: ffffffff81142fae [ 94.218004] RBP: ffff88013fc03e10 R08: ffff880137830238 R09: 0000000000000001 [ 94.218004] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 [ 94.218004] R13: ffffea0004e2cf00 R14: ffffffff812f6eb6 R15: 0000000000000246 [ 94.218004] FS: 0000000000000000(0000) GS:ffff88013fc00000(0000) knlGS:0000000000000000 [ 94.218004] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [ 94.218004] CR2: 000000000000001c CR3: 00000001395ab000 CR4: 00000000000006f0 [ 94.218004] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 94.218004] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 94.218004] Process swapper/0 (pid: 0, threadinfo ffffffff81e00000, task ffffffff81e0d020) [ 94.218004] Stack: [ 94.218004] 0000000000000102 ffff88013fc0db20 ffffffff81e22700 ffff880139500f00 [ 94.218004] 0000000000000001 000000000000000a ffff88013fc03e20 ffffffff812f6eb6 [ 94.218004] ffff88013fc03e90 ffffffff810c8da2 ffffffff81e01fd8 ffff880137830240 [ 94.218004] Call Trace: [ 94.218004] [ 94.218004] [] icq_free_icq_rcu+0x16/0x20 [ 94.218004] [] __rcu_process_callbacks+0x1c2/0x420 [ 94.218004] [] rcu_process_callbacks+0x38/0x250 [ 94.218004] [] __do_softirq+0xce/0x3e0 [ 94.218004] [] ? clockevents_program_event+0x74/0x100 [ 94.218004] [] ? tick_program_event+0x24/0x30 [ 94.218004] [] call_softirq+0x1c/0x30 [ 94.218004] [] do_softirq+0x8d/0xc0 [ 94.218004] [] irq_exit+0xae/0xe0 [ 94.218004] [] smp_apic_timer_interrupt+0x6e/0x99 [ 94.218004] [] apic_timer_interrupt+0x70/0x80 Once a queue is quiesced, it's not supposed to have any elvpriv data or icq's, and elevator switching depends on that. Request alloc path followed the rule for elvpriv data but forgot apply it to icq's leading to the following crash during elevator switch. Fix it by not allocating icq's if ELVPRIV is not set for the request. Reported-by: Vivek Goyal Tested-by: Vivek Goyal Signed-off-by: Shaohua Li Acked-by: Tejun Heo Signed-off-by: Jens Axboe --- block/blk-core.c | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/block/blk-core.c b/block/blk-core.c index e6c05a97ee2b..636702575118 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -872,13 +872,15 @@ retry: spin_unlock_irq(q->queue_lock); /* create icq if missing */ - if (unlikely(et->icq_cache && !icq)) + if ((rw_flags & REQ_ELVPRIV) && unlikely(et->icq_cache && !icq)) { icq = ioc_create_icq(q, gfp_mask); + if (!icq) + goto fail_icq; + } - /* rqs are guaranteed to have icq on elv_set_request() if requested */ - if (likely(!et->icq_cache || icq)) - rq = blk_alloc_request(q, icq, rw_flags, gfp_mask); + rq = blk_alloc_request(q, icq, rw_flags, gfp_mask); +fail_icq: if (unlikely(!rq)) { /* * Allocation failed presumably due to memory. Undo anything -- GitLab From 8bd92669199be1739b0430e9e96eb98de88aee42 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Jan 2012 11:48:23 +0000 Subject: [PATCH 0056/1359] Revert "ARM: sa1100: clean up of the clock support" This reverts commit edf3ff5bac2582b57de4e7c6569fee5d7c1c0a42. This revert is necessary to revert the broken "RTC: sa1100: support sa1100, pxa and mmp soc families" change. --- arch/arm/Kconfig | 2 +- arch/arm/mach-sa1100/clock.c | 91 ++++++++++-------------------------- 2 files changed, 26 insertions(+), 67 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 24626b0419ee..bb68e65ab180 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -754,7 +754,7 @@ config ARCH_SA1100 select ARCH_HAS_CPUFREQ select CPU_FREQ select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP + select HAVE_CLK select HAVE_SCHED_CLOCK select TICK_ONESHOT select ARCH_REQUIRE_GPIOLIB diff --git a/arch/arm/mach-sa1100/clock.c b/arch/arm/mach-sa1100/clock.c index d6df9f6c9f7e..dab3c6347a8f 100644 --- a/arch/arm/mach-sa1100/clock.c +++ b/arch/arm/mach-sa1100/clock.c @@ -11,39 +11,17 @@ #include #include #include -#include -#include #include -struct clkops { - void (*enable)(struct clk *); - void (*disable)(struct clk *); - unsigned long (*getrate)(struct clk *); -}; - +/* + * Very simple clock implementation - we only have one clock to deal with. + */ struct clk { - const struct clkops *ops; - unsigned long rate; unsigned int enabled; }; -#define INIT_CLKREG(_clk, _devname, _conname) \ - { \ - .clk = _clk, \ - .dev_id = _devname, \ - .con_id = _conname, \ - } - -#define DEFINE_CLK(_name, _ops, _rate) \ -struct clk clk_##_name = { \ - .ops = _ops, \ - .rate = _rate, \ - } - -static DEFINE_SPINLOCK(clocks_lock); - -static void clk_gpio27_enable(struct clk *clk) +static void clk_gpio27_enable(void) { /* * First, set up the 3.6864MHz clock on GPIO 27 for the SA-1111: @@ -54,22 +32,38 @@ static void clk_gpio27_enable(struct clk *clk) TUCR = TUCR_3_6864MHz; } -static void clk_gpio27_disable(struct clk *clk) +static void clk_gpio27_disable(void) { TUCR = 0; GPDR &= ~GPIO_32_768kHz; GAFR &= ~GPIO_32_768kHz; } +static struct clk clk_gpio27; + +static DEFINE_SPINLOCK(clocks_lock); + +struct clk *clk_get(struct device *dev, const char *id) +{ + const char *devname = dev_name(dev); + + return strcmp(devname, "sa1111.0") ? ERR_PTR(-ENOENT) : &clk_gpio27; +} +EXPORT_SYMBOL(clk_get); + +void clk_put(struct clk *clk) +{ +} +EXPORT_SYMBOL(clk_put); + int clk_enable(struct clk *clk) { unsigned long flags; spin_lock_irqsave(&clocks_lock, flags); if (clk->enabled++ == 0) - clk->ops->enable(clk); + clk_gpio27_enable(); spin_unlock_irqrestore(&clocks_lock, flags); - return 0; } EXPORT_SYMBOL(clk_enable); @@ -82,48 +76,13 @@ void clk_disable(struct clk *clk) spin_lock_irqsave(&clocks_lock, flags); if (--clk->enabled == 0) - clk->ops->disable(clk); + clk_gpio27_disable(); spin_unlock_irqrestore(&clocks_lock, flags); } EXPORT_SYMBOL(clk_disable); unsigned long clk_get_rate(struct clk *clk) { - unsigned long rate; - - rate = clk->rate; - if (clk->ops->getrate) - rate = clk->ops->getrate(clk); - - return rate; + return 3686400; } EXPORT_SYMBOL(clk_get_rate); - -const struct clkops clk_gpio27_ops = { - .enable = clk_gpio27_enable, - .disable = clk_gpio27_disable, -}; - -static void clk_dummy_enable(struct clk *clk) { } -static void clk_dummy_disable(struct clk *clk) { } - -const struct clkops clk_dummy_ops = { - .enable = clk_dummy_enable, - .disable = clk_dummy_disable, -}; - -static DEFINE_CLK(gpio27, &clk_gpio27_ops, 3686400); -static DEFINE_CLK(dummy, &clk_dummy_ops, 0); - -static struct clk_lookup sa11xx_clkregs[] = { - INIT_CLKREG(&clk_gpio27, "sa1111.0", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), -}; - -static int __init sa11xx_clk_init(void) -{ - clkdev_add_table(sa11xx_clkregs, ARRAY_SIZE(sa11xx_clkregs)); - return 0; -} - -postcore_initcall(sa11xx_clk_init); -- GitLab From a55b5adaf403c4d032e0871ad4ee3367782f4db6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Jan 2012 11:48:51 +0000 Subject: [PATCH 0057/1359] Revert "ARM: pxa: add dummy clock for sa1100-rtc" This reverts commit 7557c175f60d8d40baf16b22caf79beadef8f081. This revert is necessary to revert the broken "RTC: sa1100: support sa1100, pxa and mmp soc families" change. --- arch/arm/mach-pxa/pxa25x.c | 2 -- arch/arm/mach-pxa/pxa27x.c | 2 -- arch/arm/mach-pxa/pxa300.c | 1 - arch/arm/mach-pxa/pxa320.c | 1 - arch/arm/mach-pxa/pxa3xx.c | 1 - arch/arm/mach-pxa/pxa95x.c | 1 - 6 files changed, 8 deletions(-) diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c index adf058fa97ee..91e4f6c03766 100644 --- a/arch/arm/mach-pxa/pxa25x.c +++ b/arch/arm/mach-pxa/pxa25x.c @@ -209,8 +209,6 @@ static struct clk_lookup pxa25x_clkregs[] = { INIT_CLKREG(&clk_pxa25x_gpio11, NULL, "GPIO11_CLK"), INIT_CLKREG(&clk_pxa25x_gpio12, NULL, "GPIO12_CLK"), INIT_CLKREG(&clk_pxa25x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static struct clk_lookup pxa25x_hwuart_clkreg = diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c index 180bd8675d4b..aed6cbcf3866 100644 --- a/arch/arm/mach-pxa/pxa27x.c +++ b/arch/arm/mach-pxa/pxa27x.c @@ -230,8 +230,6 @@ static struct clk_lookup pxa27x_clkregs[] = { INIT_CLKREG(&clk_pxa27x_im, NULL, "IMCLK"), INIT_CLKREG(&clk_pxa27x_memc, NULL, "MEMCLK"), INIT_CLKREG(&clk_pxa27x_mem, "pxa2xx-pcmcia", NULL), - INIT_CLKREG(&clk_dummy, "pxa-gpio", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; #ifdef CONFIG_PM diff --git a/arch/arm/mach-pxa/pxa300.c b/arch/arm/mach-pxa/pxa300.c index 0388eda7878a..40bb16501d86 100644 --- a/arch/arm/mach-pxa/pxa300.c +++ b/arch/arm/mach-pxa/pxa300.c @@ -89,7 +89,6 @@ static DEFINE_PXA3_CKEN(gcu, PXA300_GCU, 0, 0); static struct clk_lookup common_clkregs[] = { INIT_CLKREG(&clk_common_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static DEFINE_PXA3_CKEN(pxa310_mmc3, MMC3, 19500000, 0); diff --git a/arch/arm/mach-pxa/pxa320.c b/arch/arm/mach-pxa/pxa320.c index d487e1ff4c9a..8d614ecd8e99 100644 --- a/arch/arm/mach-pxa/pxa320.c +++ b/arch/arm/mach-pxa/pxa320.c @@ -83,7 +83,6 @@ static DEFINE_PXA3_CKEN(gcu, PXA320_GCU, 0, 0); static struct clk_lookup pxa320_clkregs[] = { INIT_CLKREG(&clk_pxa320_nand, "pxa3xx-nand", NULL), INIT_CLKREG(&clk_gcu, "pxa3xx-gcu", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), }; static int __init pxa320_init(void) diff --git a/arch/arm/mach-pxa/pxa3xx.c b/arch/arm/mach-pxa/pxa3xx.c index f107c71c7589..4f402afa6609 100644 --- a/arch/arm/mach-pxa/pxa3xx.c +++ b/arch/arm/mach-pxa/pxa3xx.c @@ -67,7 +67,6 @@ static struct clk_lookup pxa3xx_clkregs[] = { INIT_CLKREG(&clk_pxa3xx_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), INIT_CLKREG(&clk_pxa3xx_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa3xx_camera, NULL, "CAMCLK"), INIT_CLKREG(&clk_pxa3xx_ac97, NULL, "AC97CLK"), diff --git a/arch/arm/mach-pxa/pxa95x.c b/arch/arm/mach-pxa/pxa95x.c index fccc644702e6..d082a583df78 100644 --- a/arch/arm/mach-pxa/pxa95x.c +++ b/arch/arm/mach-pxa/pxa95x.c @@ -217,7 +217,6 @@ static struct clk_lookup pxa95x_clkregs[] = { INIT_CLKREG(&clk_pxa95x_pout, NULL, "CLK_POUT"), /* Power I2C clock is always on */ INIT_CLKREG(&clk_dummy, "pxa3xx-pwri2c.1", NULL), - INIT_CLKREG(&clk_dummy, "sa1100-rtc", NULL), INIT_CLKREG(&clk_pxa95x_lcd, "pxa2xx-fb", NULL), INIT_CLKREG(&clk_pxa95x_ffuart, "pxa2xx-uart.0", NULL), INIT_CLKREG(&clk_pxa95x_btuart, "pxa2xx-uart.1", NULL), -- GitLab From a0164a574a3f284f438081c53fb864d275e54560 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Jan 2012 11:55:21 +0000 Subject: [PATCH 0058/1359] Revert "RTC: sa1100: support sa1100, pxa and mmp soc families" This reverts commit 7cea00657dd4daef66ad95e976d5d67ed94cb97e. The sa1100 cleanups fatally broke the SA1100 RTC driver - the first hint that something is wrong are these compiler warnings: drivers/rtc/rtc-sa1100.c:42:1: warning: "RCNR" redefined In file included from arch/arm/mach-sa1100/include/mach/hardware.h:73, from drivers/rtc/rtc-sa1100.c:35: arch/arm/mach-sa1100/include/mach/SA-1100.h:877:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:43:1: warning: "RTAR" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:876:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:44:1: warning: "RTSR" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:879:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:45:1: warning: "RTTR" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:878:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:47:1: warning: "RTSR_HZE" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:891:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:48:1: warning: "RTSR_ALE" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:890:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:49:1: warning: "RTSR_HZ" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:889:1: warning: this is the location of the previous definition drivers/rtc/rtc-sa1100.c:50:1: warning: "RTSR_AL" redefined arch/arm/mach-sa1100/include/mach/SA-1100.h:888:1: warning: this is the location of the previous definition and the second problem, which is far more severe, are the different register layouts, resulting in the wrong registers being read on SA11x0 platforms. This patch adds: #define RCNR 0x00 /* RTC Count Register */ #define RTAR 0x04 /* RTC Alarm Register */ #define RTSR 0x08 /* RTC Status Register */ #define RTTR 0x0c /* RTC Timer Trim Register */ but the SA11x0 registers are: #define RTAR __REG(0x90010000) /* RTC Alarm Reg. */ #define RCNR __REG(0x90010004) /* RTC CouNt Reg. */ #define RTTR __REG(0x90010008) /* RTC Trim Reg. */ #define RTSR __REG(0x90010010) /* RTC Status Reg. */ --- arch/arm/mach-pxa/devices.c | 20 --- arch/arm/mach-sa1100/generic.c | 20 --- drivers/rtc/Kconfig | 2 +- drivers/rtc/rtc-sa1100.c | 256 ++++++++++----------------------- 4 files changed, 80 insertions(+), 218 deletions(-) diff --git a/arch/arm/mach-pxa/devices.c b/arch/arm/mach-pxa/devices.c index 18fd177073f4..5bc13121eac5 100644 --- a/arch/arm/mach-pxa/devices.c +++ b/arch/arm/mach-pxa/devices.c @@ -415,29 +415,9 @@ static struct resource pxa_rtc_resources[] = { }, }; -static struct resource sa1100_rtc_resources[] = { - [0] = { - .start = 0x40900000, - .end = 0x409000ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_RTC1Hz, - .end = IRQ_RTC1Hz, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_RTCAlrm, - .end = IRQ_RTCAlrm, - .flags = IORESOURCE_IRQ, - }, -}; - struct platform_device sa1100_device_rtc = { .name = "sa1100-rtc", .id = -1, - .num_resources = ARRAY_SIZE(sa1100_rtc_resources), - .resource = sa1100_rtc_resources, }; struct platform_device pxa_device_rtc = { diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index e3a28ca2a7b7..a7c0df6e670c 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -350,29 +350,9 @@ void sa11x0_register_irda(struct irda_platform_data *irda) sa11x0_register_device(&sa11x0ir_device, irda); } -static struct resource sa11x0rtc_resources[] = { - [0] = { - .start = 0x90010000, - .end = 0x900100ff, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_RTC1Hz, - .end = IRQ_RTC1Hz, - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = IRQ_RTCAlrm, - .end = IRQ_RTCAlrm, - .flags = IORESOURCE_IRQ, - }, -}; - static struct platform_device sa11x0rtc_device = { .name = "sa1100-rtc", .id = -1, - .resource = sa11x0rtc_resources, - .num_resources = ARRAY_SIZE(sa11x0rtc_resources), }; static struct platform_device *sa11x0_devices[] __initdata = { diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index e19a4031f45e..3a125b835546 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -774,7 +774,7 @@ config RTC_DRV_EP93XX config RTC_DRV_SA1100 tristate "SA11x0/PXA2xx" - depends on ARCH_SA1100 || ARCH_PXA || ARCH_MMP + depends on ARCH_SA1100 || ARCH_PXA help If you say Y here you will get access to the real time clock built into your SA11x0 or PXA2xx CPU. diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 4595d3e645a7..9683daf56d8e 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -27,42 +27,24 @@ #include #include #include +#include #include -#include -#include -#include +#include #include #include +#ifdef CONFIG_ARCH_PXA +#include +#endif + #define RTC_DEF_DIVIDER (32768 - 1) #define RTC_DEF_TRIM 0 -#define RTC_FREQ 1024 - -#define RCNR 0x00 /* RTC Count Register */ -#define RTAR 0x04 /* RTC Alarm Register */ -#define RTSR 0x08 /* RTC Status Register */ -#define RTTR 0x0c /* RTC Timer Trim Register */ - -#define RTSR_HZE (1 << 3) /* HZ interrupt enable */ -#define RTSR_ALE (1 << 2) /* RTC alarm interrupt enable */ -#define RTSR_HZ (1 << 1) /* HZ rising-edge detected */ -#define RTSR_AL (1 << 0) /* RTC alarm detected */ - -#define rtc_readl(sa1100_rtc, reg) \ - readl_relaxed((sa1100_rtc)->base + (reg)) -#define rtc_writel(sa1100_rtc, reg, value) \ - writel_relaxed((value), (sa1100_rtc)->base + (reg)) - -struct sa1100_rtc { - struct resource *ress; - void __iomem *base; - struct clk *clk; - int irq_1Hz; - int irq_Alrm; - struct rtc_device *rtc; - spinlock_t lock; /* Protects this structure */ -}; + +static const unsigned long RTC_FREQ = 1024; +static struct rtc_time rtc_alarm; +static DEFINE_SPINLOCK(sa1100_rtc_lock); + /* * Calculate the next alarm time given the requested alarm time mask * and the current time. @@ -93,23 +75,22 @@ static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) { struct platform_device *pdev = to_platform_device(dev_id); - struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev); + struct rtc_device *rtc = platform_get_drvdata(pdev); unsigned int rtsr; unsigned long events = 0; - spin_lock(&sa1100_rtc->lock); + spin_lock(&sa1100_rtc_lock); + rtsr = RTSR; /* clear interrupt sources */ - rtsr = rtc_readl(sa1100_rtc, RTSR); - rtc_writel(sa1100_rtc, RTSR, 0); - + RTSR = 0; /* Fix for a nasty initialization problem the in SA11xx RTSR register. * See also the comments in sa1100_rtc_probe(). */ if (rtsr & (RTSR_ALE | RTSR_HZE)) { /* This is the original code, before there was the if test * above. This code does not clear interrupts that were not * enabled. */ - rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ) & (rtsr >> 2)); + RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2); } else { /* For some reason, it is possible to enter this routine * without interruptions enabled, it has been tested with @@ -118,13 +99,13 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) * This situation leads to an infinite "loop" of interrupt * routine calling and as a result the processor seems to * lock on its first call to open(). */ - rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ)); + RTSR = RTSR_AL | RTSR_HZ; } /* clear alarm interrupt if it has occurred */ if (rtsr & RTSR_AL) rtsr &= ~RTSR_ALE; - rtc_writel(sa1100_rtc, RTSR, rtsr & (RTSR_ALE | RTSR_HZE)); + RTSR = rtsr & (RTSR_ALE | RTSR_HZE); /* update irq data & counter */ if (rtsr & RTSR_AL) @@ -132,100 +113,86 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) if (rtsr & RTSR_HZ) events |= RTC_UF | RTC_IRQF; - rtc_update_irq(sa1100_rtc->rtc, 1, events); + rtc_update_irq(rtc, 1, events); - spin_unlock(&sa1100_rtc->lock); + spin_unlock(&sa1100_rtc_lock); return IRQ_HANDLED; } static int sa1100_rtc_open(struct device *dev) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); int ret; + struct platform_device *plat_dev = to_platform_device(dev); + struct rtc_device *rtc = platform_get_drvdata(plat_dev); - ret = request_irq(sa1100_rtc->irq_1Hz, sa1100_rtc_interrupt, - IRQF_DISABLED, "rtc 1Hz", dev); + ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED, + "rtc 1Hz", dev); if (ret) { - dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_1Hz); + dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz); goto fail_ui; } - ret = request_irq(sa1100_rtc->irq_Alrm, sa1100_rtc_interrupt, - IRQF_DISABLED, "rtc Alrm", dev); + ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED, + "rtc Alrm", dev); if (ret) { - dev_err(dev, "IRQ %d already in use.\n", sa1100_rtc->irq_Alrm); + dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm); goto fail_ai; } - sa1100_rtc->rtc->max_user_freq = RTC_FREQ; - rtc_irq_set_freq(sa1100_rtc->rtc, NULL, RTC_FREQ); + rtc->max_user_freq = RTC_FREQ; + rtc_irq_set_freq(rtc, NULL, RTC_FREQ); return 0; fail_ai: - free_irq(sa1100_rtc->irq_1Hz, dev); + free_irq(IRQ_RTC1Hz, dev); fail_ui: return ret; } static void sa1100_rtc_release(struct device *dev) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); + spin_lock_irq(&sa1100_rtc_lock); + RTSR = 0; + spin_unlock_irq(&sa1100_rtc_lock); - spin_lock_irq(&sa1100_rtc->lock); - rtc_writel(sa1100_rtc, RTSR, 0); - spin_unlock_irq(&sa1100_rtc->lock); - - free_irq(sa1100_rtc->irq_Alrm, dev); - free_irq(sa1100_rtc->irq_1Hz, dev); + free_irq(IRQ_RTCAlrm, dev); + free_irq(IRQ_RTC1Hz, dev); } static int sa1100_rtc_alarm_irq_enable(struct device *dev, unsigned int enabled) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - unsigned int rtsr; - - spin_lock_irq(&sa1100_rtc->lock); - - rtsr = rtc_readl(sa1100_rtc, RTSR); + spin_lock_irq(&sa1100_rtc_lock); if (enabled) - rtsr |= RTSR_ALE; + RTSR |= RTSR_ALE; else - rtsr &= ~RTSR_ALE; - rtc_writel(sa1100_rtc, RTSR, rtsr); - - spin_unlock_irq(&sa1100_rtc->lock); + RTSR &= ~RTSR_ALE; + spin_unlock_irq(&sa1100_rtc_lock); return 0; } static int sa1100_rtc_read_time(struct device *dev, struct rtc_time *tm) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - - rtc_time_to_tm(rtc_readl(sa1100_rtc, RCNR), tm); + rtc_time_to_tm(RCNR, tm); return 0; } static int sa1100_rtc_set_time(struct device *dev, struct rtc_time *tm) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); unsigned long time; int ret; ret = rtc_tm_to_time(tm, &time); if (ret == 0) - rtc_writel(sa1100_rtc, RCNR, time); + RCNR = time; return ret; } static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - unsigned long time; - unsigned int rtsr; + u32 rtsr; - time = rtc_readl(sa1100_rtc, RCNR); - rtc_time_to_tm(time, &alrm->time); - rtsr = rtc_readl(sa1100_rtc, RTSR); + memcpy(&alrm->time, &rtc_alarm, sizeof(struct rtc_time)); + rtsr = RTSR; alrm->enabled = (rtsr & RTSR_ALE) ? 1 : 0; alrm->pending = (rtsr & RTSR_AL) ? 1 : 0; return 0; @@ -233,39 +200,31 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); struct rtc_time now_tm, alarm_tm; - unsigned long time, alarm; - unsigned int rtsr; - - spin_lock_irq(&sa1100_rtc->lock); + int ret; - time = rtc_readl(sa1100_rtc, RCNR); - rtc_time_to_tm(time, &now_tm); - rtc_next_alarm_time(&alarm_tm, &now_tm, &alrm->time); - rtc_tm_to_time(&alarm_tm, &alarm); - rtc_writel(sa1100_rtc, RTAR, alarm); + spin_lock_irq(&sa1100_rtc_lock); - rtsr = rtc_readl(sa1100_rtc, RTSR); + now = RCNR; + rtc_time_to_tm(now, &now_tm); + rtc_next_alarm_time(&alarm_tm, &now_tm, alrm->time); + rtc_tm_to_time(&alarm_tm, &time); + RTAR = time; if (alrm->enabled) - rtsr |= RTSR_ALE; + RTSR |= RTSR_ALE; else - rtsr &= ~RTSR_ALE; - rtc_writel(sa1100_rtc, RTSR, rtsr); + RTSR &= ~RTSR_ALE; - spin_unlock_irq(&sa1100_rtc->lock); + spin_unlock_irq(&sa1100_rtc_lock); - return 0; + return ret; } static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); + seq_printf(seq, "trim/divider\t\t: 0x%08x\n", (u32) RTTR); + seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", (u32)RTSR); - seq_printf(seq, "trim/divider\t\t: 0x%08x\n", - rtc_readl(sa1100_rtc, RTTR)); - seq_printf(seq, "RTSR\t\t\t: 0x%08x\n", - rtc_readl(sa1100_rtc, RTSR)); return 0; } @@ -282,51 +241,7 @@ static const struct rtc_class_ops sa1100_rtc_ops = { static int sa1100_rtc_probe(struct platform_device *pdev) { - struct sa1100_rtc *sa1100_rtc; - unsigned int rttr; - int ret; - - sa1100_rtc = kzalloc(sizeof(struct sa1100_rtc), GFP_KERNEL); - if (!sa1100_rtc) - return -ENOMEM; - - spin_lock_init(&sa1100_rtc->lock); - platform_set_drvdata(pdev, sa1100_rtc); - - ret = -ENXIO; - sa1100_rtc->ress = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!sa1100_rtc->ress) { - dev_err(&pdev->dev, "No I/O memory resource defined\n"); - goto err_ress; - } - - sa1100_rtc->irq_1Hz = platform_get_irq(pdev, 0); - if (sa1100_rtc->irq_1Hz < 0) { - dev_err(&pdev->dev, "No 1Hz IRQ resource defined\n"); - goto err_ress; - } - sa1100_rtc->irq_Alrm = platform_get_irq(pdev, 1); - if (sa1100_rtc->irq_Alrm < 0) { - dev_err(&pdev->dev, "No alarm IRQ resource defined\n"); - goto err_ress; - } - - ret = -ENOMEM; - sa1100_rtc->base = ioremap(sa1100_rtc->ress->start, - resource_size(sa1100_rtc->ress)); - if (!sa1100_rtc->base) { - dev_err(&pdev->dev, "Unable to map pxa RTC I/O memory\n"); - goto err_map; - } - - sa1100_rtc->clk = clk_get(&pdev->dev, NULL); - if (IS_ERR(sa1100_rtc->clk)) { - dev_err(&pdev->dev, "failed to find rtc clock source\n"); - ret = PTR_ERR(sa1100_rtc->clk); - goto err_clk; - } - clk_prepare(sa1100_rtc->clk); - clk_enable(sa1100_rtc->clk); + struct rtc_device *rtc; /* * According to the manual we should be able to let RTTR be zero @@ -335,24 +250,24 @@ static int sa1100_rtc_probe(struct platform_device *pdev) * If the clock divider is uninitialized then reset it to the * default value to get the 1Hz clock. */ - if (rtc_readl(sa1100_rtc, RTTR) == 0) { - rttr = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16); - rtc_writel(sa1100_rtc, RTTR, rttr); - dev_warn(&pdev->dev, "warning: initializing default clock" - " divider/trim value\n"); + if (RTTR == 0) { + RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16); + dev_warn(&pdev->dev, "warning: " + "initializing default clock divider/trim value\n"); /* The current RTC value probably doesn't make sense either */ - rtc_writel(sa1100_rtc, RCNR, 0); + RCNR = 0; } device_init_wakeup(&pdev->dev, 1); - sa1100_rtc->rtc = rtc_device_register(pdev->name, &pdev->dev, - &sa1100_rtc_ops, THIS_MODULE); - if (IS_ERR(sa1100_rtc->rtc)) { - dev_err(&pdev->dev, "Failed to register RTC device -> %d\n", - ret); - goto err_rtc_reg; - } + rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops, + THIS_MODULE); + + if (IS_ERR(rtc)) + return PTR_ERR(rtc); + + platform_set_drvdata(pdev, rtc); + /* Fix for a nasty initialization problem the in SA11xx RTSR register. * See also the comments in sa1100_rtc_interrupt(). * @@ -375,46 +290,33 @@ static int sa1100_rtc_probe(struct platform_device *pdev) * * Notice that clearing bit 1 and 0 is accomplished by writting ONES to * the corresponding bits in RTSR. */ - rtc_writel(sa1100_rtc, RTSR, (RTSR_AL | RTSR_HZ)); + RTSR = RTSR_AL | RTSR_HZ; return 0; - -err_rtc_reg: -err_clk: - iounmap(sa1100_rtc->base); -err_ress: -err_map: - kfree(sa1100_rtc); - return ret; } static int sa1100_rtc_remove(struct platform_device *pdev) { - struct sa1100_rtc *sa1100_rtc = platform_get_drvdata(pdev); + struct rtc_device *rtc = platform_get_drvdata(pdev); + + if (rtc) + rtc_device_unregister(rtc); - rtc_device_unregister(sa1100_rtc->rtc); - clk_disable(sa1100_rtc->clk); - clk_unprepare(sa1100_rtc->clk); - iounmap(sa1100_rtc->base); return 0; } #ifdef CONFIG_PM static int sa1100_rtc_suspend(struct device *dev) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) - enable_irq_wake(sa1100_rtc->irq_Alrm); + enable_irq_wake(IRQ_RTCAlrm); return 0; } static int sa1100_rtc_resume(struct device *dev) { - struct sa1100_rtc *sa1100_rtc = dev_get_drvdata(dev); - if (device_may_wakeup(dev)) - disable_irq_wake(sa1100_rtc->irq_Alrm); + disable_irq_wake(IRQ_RTCAlrm); return 0; } -- GitLab From 57270fcdc7925def3c80d75344467dff2bec8025 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Jan 2012 11:50:40 +0000 Subject: [PATCH 0059/1359] Revert "RTC: sa1100: remove redundant code of setting alarm" This reverts commit 42874759d7494648e42e6e0465fc9c4f3752bba4. This wasn't tested as a stand-alone patch, and it has build errors without the following patches applied: drivers/rtc/rtc-sa1100.c: In function 'sa1100_rtc_set_alarm': drivers/rtc/rtc-sa1100.c:208: error: 'now' undeclared (first use in this function) drivers/rtc/rtc-sa1100.c:208: error: (Each undeclared identifier is reported only once drivers/rtc/rtc-sa1100.c:208: error: for each function it appears in.) drivers/rtc/rtc-sa1100.c:210: error: incompatible type for argument 3 of 'rtc_next_alarm_time' drivers/rtc/rtc-sa1100.c:211: error: 'time' undeclared (first use in this function) So it too gets reverted to bring us back to a working point. --- drivers/rtc/rtc-sa1100.c | 53 +++++++++++++++++++++++++++++++--------- 1 file changed, 41 insertions(+), 12 deletions(-) diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 9683daf56d8e..cb9a585312cc 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -45,6 +45,16 @@ static const unsigned long RTC_FREQ = 1024; static struct rtc_time rtc_alarm; static DEFINE_SPINLOCK(sa1100_rtc_lock); +static inline int rtc_periodic_alarm(struct rtc_time *tm) +{ + return (tm->tm_year == -1) || + ((unsigned)tm->tm_mon >= 12) || + ((unsigned)(tm->tm_mday - 1) >= 31) || + ((unsigned)tm->tm_hour > 23) || + ((unsigned)tm->tm_min > 59) || + ((unsigned)tm->tm_sec > 59); +} + /* * Calculate the next alarm time given the requested alarm time mask * and the current time. @@ -72,6 +82,27 @@ static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, } } +static int rtc_update_alarm(struct rtc_time *alrm) +{ + struct rtc_time alarm_tm, now_tm; + unsigned long now, time; + int ret; + + do { + now = RCNR; + rtc_time_to_tm(now, &now_tm); + rtc_next_alarm_time(&alarm_tm, &now_tm, alrm); + ret = rtc_tm_to_time(&alarm_tm, &time); + if (ret != 0) + break; + + RTSR = RTSR & (RTSR_HZE|RTSR_ALE|RTSR_AL); + RTAR = time; + } while (now != RCNR); + + return ret; +} + static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) { struct platform_device *pdev = to_platform_device(dev_id); @@ -115,6 +146,9 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id) rtc_update_irq(rtc, 1, events); + if (rtsr & RTSR_AL && rtc_periodic_alarm(&rtc_alarm)) + rtc_update_alarm(&rtc_alarm); + spin_unlock(&sa1100_rtc_lock); return IRQ_HANDLED; @@ -200,21 +234,16 @@ static int sa1100_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) { - struct rtc_time now_tm, alarm_tm; int ret; spin_lock_irq(&sa1100_rtc_lock); - - now = RCNR; - rtc_time_to_tm(now, &now_tm); - rtc_next_alarm_time(&alarm_tm, &now_tm, alrm->time); - rtc_tm_to_time(&alarm_tm, &time); - RTAR = time; - if (alrm->enabled) - RTSR |= RTSR_ALE; - else - RTSR &= ~RTSR_ALE; - + ret = rtc_update_alarm(&alrm->time); + if (ret == 0) { + if (alrm->enabled) + RTSR |= RTSR_ALE; + else + RTSR &= ~RTSR_ALE; + } spin_unlock_irq(&sa1100_rtc_lock); return ret; -- GitLab From 5f76559a7736d049705400b5546d524485d5ed0d Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 18 Jan 2012 23:46:28 +0000 Subject: [PATCH 0060/1359] ARM: sa11x0: fix collie build error f408c985cefc (GPIO: sa1100: implement proper gpiolib gpio_to_irq conversion) made gpio_to_irq() a function. This breaks collie where it's used to initialize some static data. Fix that by moving the initialization to the init code. arch/arm/mach-sa1100/collie.c:139: error: initializer element is not constant arch/arm/mach-sa1100/collie.c:139: error: (near initialization for 'collie_power_resource[0].start') arch/arm/mach-sa1100/collie.c:140: error: initializer element is not constant arch/arm/mach-sa1100/collie.c:140: error: (near initialization for 'collie_power_resource[0].end') Signed-off-by: Russell King --- arch/arm/mach-sa1100/collie.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index c483912d08af..cce8763d0839 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -144,8 +144,6 @@ static struct pda_power_pdata collie_power_data = { static struct resource collie_power_resource[] = { { .name = "ac", - .start = gpio_to_irq(COLLIE_GPIO_AC_IN), - .end = gpio_to_irq(COLLIE_GPIO_AC_IN), .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE | IORESOURCE_IRQ_LOWEDGE, @@ -347,7 +345,8 @@ static void __init collie_init(void) GPSR |= _COLLIE_GPIO_UCB1x00_RESET; - + collie_power_resource[0].start = gpio_to_irq(COLLIE_GPIO_AC_IN); + collie_power_resource[0].end = gpio_to_irq(COLLIE_GPIO_AC_IN); platform_scoop_config = &collie_pcmcia_config; ret = platform_add_devices(devices, ARRAY_SIZE(devices)); -- GitLab From 7a28b5a25f212b5f17cc0c973d1b8baa16069dd5 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 18 Jan 2012 23:45:55 +0000 Subject: [PATCH 0061/1359] ARM: sa11x0: fix section mismatch in cpu-sa1100.c WARNING: arch/arm/mach-sa1100/built-in.o(.data+0x11b8): Section mismatch in reference from the variable sa1100_driver to the function .init.text:sa1100_cpu_init() The variable sa1100_driver references the function __init sa1100_cpu_init() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Russell King --- arch/arm/mach-sa1100/cpu-sa1100.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-sa1100/cpu-sa1100.c b/arch/arm/mach-sa1100/cpu-sa1100.c index aaa8acf76b7b..19b2053f5af4 100644 --- a/arch/arm/mach-sa1100/cpu-sa1100.c +++ b/arch/arm/mach-sa1100/cpu-sa1100.c @@ -228,7 +228,7 @@ static int __init sa1100_cpu_init(struct cpufreq_policy *policy) return 0; } -static struct cpufreq_driver sa1100_driver = { +static struct cpufreq_driver sa1100_driver __refdata = { .flags = CPUFREQ_STICKY, .verify = sa11x0_verify_speed, .target = sa1100_target, -- GitLab From bc2827d08cb31de5ab3a467a3e1572d8437340e6 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Jan 2012 14:35:19 +0000 Subject: [PATCH 0062/1359] ARM: fix a section mismatch warning with our use of memblock Commit 716a3dc2008 (ARM: Add arm_memblock_steal() to allocate memory away from the kernel) added a function which calls memblock_alloc(). This causes a section conflict: WARNING: vmlinux.o(.text+0xc614): Section mismatch in reference from the function arm_memblock_steal() to the function .init.text:memblock_alloc() The function arm_memblock_steal() references the function __init memblock_alloc(). Signed-off-by: Russell King --- arch/arm/mm/init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 6ec1226fc62d..5dc7d127a40f 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -310,7 +310,7 @@ static void arm_memory_present(void) static bool arm_memblock_steal_permitted = true; -phys_addr_t arm_memblock_steal(phys_addr_t size, phys_addr_t align) +phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align) { phys_addr_t phys; -- GitLab From 94ae0275d7d6cae84b3af11f9e3d88f529528ac7 Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 18 Jan 2012 19:40:13 +0000 Subject: [PATCH 0063/1359] ARM: vexpress: fix two section mismatch warnings WARNING: vmlinux.o(.text+0x1bc9c): Section mismatch in reference from the function ct_ca9x4_init_cpu_map() to the function .init.text:scu_get_core_count() The function ct_ca9x4_init_cpu_map() references the function __init scu_get_core_count(). WARNING: vmlinux.o(.text+0x1bce8): Section mismatch in reference from the function ct_ca9x4_init_cpu_map() to the function .init.text:set_smp_cross_call() The function ct_ca9x4_init_cpu_map() references the function __init set_smp_cross_call(). Signed-off-by: Russell King --- arch/arm/mach-vexpress/ct-ca9x4.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-vexpress/ct-ca9x4.c b/arch/arm/mach-vexpress/ct-ca9x4.c index 2b1e836a76ed..b1e87c184e54 100644 --- a/arch/arm/mach-vexpress/ct-ca9x4.c +++ b/arch/arm/mach-vexpress/ct-ca9x4.c @@ -217,7 +217,7 @@ static void __init ct_ca9x4_init(void) } #ifdef CONFIG_SMP -static void ct_ca9x4_init_cpu_map(void) +static void __init ct_ca9x4_init_cpu_map(void) { int i, ncores = scu_get_core_count(MMIO_P2V(A9_MPCORE_SCU)); @@ -233,7 +233,7 @@ static void ct_ca9x4_init_cpu_map(void) set_smp_cross_call(gic_raise_softirq); } -static void ct_ca9x4_smp_enable(unsigned int max_cpus) +static void __init ct_ca9x4_smp_enable(unsigned int max_cpus) { scu_enable(MMIO_P2V(A9_MPCORE_SCU)); } -- GitLab From 7deabca0acfe02b8e18f59a4c95676012f49a304 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 19 Jan 2012 15:20:58 +0000 Subject: [PATCH 0064/1359] ARM: fix rcu stalls on SMP platforms We can stall RCU processing on SMP platforms if a CPU sits in its idle loop for a long time. This happens because we don't call irq_enter() and irq_exit() around generic_smp_call_function_interrupt() and friends. Add the necessary calls, and remove the one from within ipi_timer(), so that they're all in a common place. Signed-off-by: Russell King --- arch/arm/kernel/smp.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 57db122a4f62..26cdc494ee9b 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -443,9 +443,7 @@ static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent); static void ipi_timer(void) { struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent); - irq_enter(); evt->event_handler(evt); - irq_exit(); } #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST @@ -548,7 +546,9 @@ void handle_IPI(int ipinr, struct pt_regs *regs) switch (ipinr) { case IPI_TIMER: + irq_enter(); ipi_timer(); + irq_exit(); break; case IPI_RESCHEDULE: @@ -556,15 +556,21 @@ void handle_IPI(int ipinr, struct pt_regs *regs) break; case IPI_CALL_FUNC: + irq_enter(); generic_smp_call_function_interrupt(); + irq_exit(); break; case IPI_CALL_FUNC_SINGLE: + irq_enter(); generic_smp_call_function_single_interrupt(); + irq_exit(); break; case IPI_CPU_STOP: + irq_enter(); ipi_cpu_stop(cpu); + irq_exit(); break; default: -- GitLab From a36d8e5bc27316163c9d753af5966ee92ecbec59 Mon Sep 17 00:00:00 2001 From: Kees Cook Date: Wed, 18 Jan 2012 01:57:21 +0100 Subject: [PATCH 0065/1359] ARM: 7279/1: standardize /proc/iomem "Kernel code" name All other ports use "Kernel code" to identify the Kernel text segment in /proc/iomem. Change the ARM resources to do the same. Signed-off-by: Kees Cook Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 129fbd55bde8..95653d03db7e 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -160,7 +160,7 @@ static struct resource mem_res[] = { .flags = IORESOURCE_MEM }, { - .name = "Kernel text", + .name = "Kernel code", .start = 0, .end = 0, .flags = IORESOURCE_MEM -- GitLab From 06e9905152cd124c53f571296e9904ea89c1a39a Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 13 Jan 2012 17:06:59 +0100 Subject: [PATCH 0066/1359] ARM: 7277/1: setup.c: Fix build warning by removing unneeded header file Fix the following build warning: CC arch/arm/kernel/setup.o In file included from arch/arm/kernel/setup.c:39: arch/arm/include/asm/elf.h:102:1: warning: "vmcore_elf64_check_arch" redefined In file included from arch/arm/kernel/setup.c:24: include/linux/crash_dump.h:30:1: warning: this is the location of the previous definition Since commit 93a72052 (crash_dump: export is_kdump_kernel to modules, consolidate elfcorehdr_addr, setup_elfcorehdr and saved_max_pfn) the inclusion of is no longer needed. Remove the inclusion of and the build warning is fixed. Signed-off-by: Fabio Estevam Signed-off-by: Russell King --- arch/arm/kernel/setup.c | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 95653d03db7e..ab70c9124538 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -21,7 +21,6 @@ #include #include #include -#include #include #include #include -- GitLab From 9f1f46a45a681d357d1ceedecec3671a5ae957f4 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 14 Dec 2011 13:57:03 +0100 Subject: [PATCH 0067/1359] drm/i915: protect force_wake_(get|put) with the gt_lock The problem this patch solves is that the forcewake accounting necessary for register reads is protected by dev->struct_mutex. But the hangcheck and error_capture code need to access registers without grabbing this mutex because we hold it while waiting for the gpu. So a new lock is required. Because currently the error_state capture is called from the error irq handler and the hangcheck code runs from a timer, it needs to be an irqsafe spinlock (note that the registers used by the irq handler (neglecting the error handling part) only uses registers that don't need the forcewake dance). We could tune this down to a normal spinlock when we rework the error_state capture and hangcheck code to run from a workqueue. But we don't have any read in a fastpath that needs forcewake, so I've decided to not care much about overhead. This prevents tests/gem_hangcheck_forcewake from i-g-t from killing my snb on recent kernels - something must have slightly changed the timings. On previous kernels it only trigger a WARN about the broken locking. v2: Drop the previous patch for the register writes. v3: Improve the commit message per Chris Wilson's suggestions. Signed-Off-by: Daniel Vetter Reviewed-by: Chris Wilson Reviewed-by: Eugeni Dodonov Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_debugfs.c | 8 ++++++-- drivers/gpu/drm/i915/i915_dma.c | 1 + drivers/gpu/drm/i915/i915_drv.c | 18 ++++++++++++------ drivers/gpu/drm/i915/i915_drv.h | 10 +++++++--- 4 files changed, 26 insertions(+), 11 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index f8b8ed22b4dc..a017b989b1ab 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -1398,9 +1398,13 @@ static int i915_gen6_forcewake_count_info(struct seq_file *m, void *data) struct drm_info_node *node = (struct drm_info_node *) m->private; struct drm_device *dev = node->minor->dev; struct drm_i915_private *dev_priv = dev->dev_private; + unsigned forcewake_count; - seq_printf(m, "forcewake count = %d\n", - atomic_read(&dev_priv->forcewake_count)); + spin_lock_irq(&dev_priv->gt_lock); + forcewake_count = dev_priv->forcewake_count; + spin_unlock_irq(&dev_priv->gt_lock); + + seq_printf(m, "forcewake count = %u\n", forcewake_count); return 0; } diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 5f4d5893e983..ddfe3d902b2a 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -2045,6 +2045,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) if (!IS_I945G(dev) && !IS_I945GM(dev)) pci_enable_msi(dev->pdev); + spin_lock_init(&dev_priv->gt_lock); spin_lock_init(&dev_priv->irq_lock); spin_lock_init(&dev_priv->error_lock); spin_lock_init(&dev_priv->rps_lock); diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 46c36f5cafb1..bdf6a1b36223 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -368,11 +368,12 @@ void __gen6_gt_force_wake_mt_get(struct drm_i915_private *dev_priv) */ void gen6_gt_force_wake_get(struct drm_i915_private *dev_priv) { - WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex)); + unsigned long irqflags; - /* Forcewake is atomic in case we get in here without the lock */ - if (atomic_add_return(1, &dev_priv->forcewake_count) == 1) + spin_lock_irqsave(&dev_priv->gt_lock, irqflags); + if (dev_priv->forcewake_count++ == 0) dev_priv->display.force_wake_get(dev_priv); + spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); } void __gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) @@ -392,10 +393,12 @@ void __gen6_gt_force_wake_mt_put(struct drm_i915_private *dev_priv) */ void gen6_gt_force_wake_put(struct drm_i915_private *dev_priv) { - WARN_ON(!mutex_is_locked(&dev_priv->dev->struct_mutex)); + unsigned long irqflags; - if (atomic_dec_and_test(&dev_priv->forcewake_count)) + spin_lock_irqsave(&dev_priv->gt_lock, irqflags); + if (--dev_priv->forcewake_count == 0) dev_priv->display.force_wake_put(dev_priv); + spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); } void __gen6_gt_wait_for_fifo(struct drm_i915_private *dev_priv) @@ -626,6 +629,7 @@ int i915_reset(struct drm_device *dev, u8 flags) * need to */ bool need_display = true; + unsigned long irqflags; int ret; if (!i915_try_reset) @@ -644,8 +648,10 @@ int i915_reset(struct drm_device *dev, u8 flags) case 6: ret = gen6_do_reset(dev, flags); /* If reset with a user forcewake, try to restore */ - if (atomic_read(&dev_priv->forcewake_count)) + spin_lock_irqsave(&dev_priv->gt_lock, irqflags); + if (dev_priv->forcewake_count) dev_priv->display.force_wake_get(dev_priv); + spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); break; case 5: ret = ironlake_do_reset(dev, flags); diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h index 602bc80baabb..9689ca38b2b3 100644 --- a/drivers/gpu/drm/i915/i915_drv.h +++ b/drivers/gpu/drm/i915/i915_drv.h @@ -288,7 +288,13 @@ typedef struct drm_i915_private { int relative_constants_mode; void __iomem *regs; - u32 gt_fifo_count; + /** gt_fifo_count and the subsequent register write are synchronized + * with dev->struct_mutex. */ + unsigned gt_fifo_count; + /** forcewake_count is protected by gt_lock */ + unsigned forcewake_count; + /** gt_lock is also taken in irq contexts. */ + struct spinlock gt_lock; struct intel_gmbus { struct i2c_adapter adapter; @@ -741,8 +747,6 @@ typedef struct drm_i915_private { struct drm_property *broadcast_rgb_property; struct drm_property *force_audio_property; - - atomic_t forcewake_count; } drm_i915_private_t; enum i915_cache_level { -- GitLab From b6e45f866465f42b53d803b0c574da0fc508a0e9 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 6 Jan 2012 11:34:04 -0800 Subject: [PATCH 0068/1359] drm/i915: Move reset forcewake processing to gen6_do_reset No reason to have half of the reset split from the other half. Signed-off-by: Keith Packard Reviewed-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.c | 16 +++++++++------- 1 file changed, 9 insertions(+), 7 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index bdf6a1b36223..a6fcd941e3ab 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -600,9 +600,17 @@ static int ironlake_do_reset(struct drm_device *dev, u8 flags) static int gen6_do_reset(struct drm_device *dev, u8 flags) { struct drm_i915_private *dev_priv = dev->dev_private; + int ret; + unsigned long irqflags; I915_WRITE(GEN6_GDRST, GEN6_GRDOM_FULL); - return wait_for((I915_READ(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500); + ret = wait_for((I915_READ(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500); + /* If reset with a user forcewake, try to restore */ + spin_lock_irqsave(&dev_priv->gt_lock, irqflags); + if (dev_priv->forcewake_count) + dev_priv->display.force_wake_get(dev_priv); + spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); + return ret; } /** @@ -629,7 +637,6 @@ int i915_reset(struct drm_device *dev, u8 flags) * need to */ bool need_display = true; - unsigned long irqflags; int ret; if (!i915_try_reset) @@ -647,11 +654,6 @@ int i915_reset(struct drm_device *dev, u8 flags) case 7: case 6: ret = gen6_do_reset(dev, flags); - /* If reset with a user forcewake, try to restore */ - spin_lock_irqsave(&dev_priv->gt_lock, irqflags); - if (dev_priv->forcewake_count) - dev_priv->display.force_wake_get(dev_priv); - spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); break; case 5: ret = ironlake_do_reset(dev, flags); -- GitLab From 286fed412a134e76be55899bc628c6fa59cb70da Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 6 Jan 2012 11:44:11 -0800 Subject: [PATCH 0069/1359] drm/i915: Hold gt_lock during reset This ensures that no register reads occur while the forcewake state of the hardware is indeterminate during the reset operation. Signed-off-by: Keith Packard Reviewed-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.c | 25 ++++++++++++++++++++++--- 1 file changed, 22 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index a6fcd941e3ab..062d1d27f704 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -603,12 +603,31 @@ static int gen6_do_reset(struct drm_device *dev, u8 flags) int ret; unsigned long irqflags; - I915_WRITE(GEN6_GDRST, GEN6_GRDOM_FULL); - ret = wait_for((I915_READ(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500); - /* If reset with a user forcewake, try to restore */ + /* Hold gt_lock across reset to prevent any register access + * with forcewake not set correctly + */ spin_lock_irqsave(&dev_priv->gt_lock, irqflags); + + /* Reset the chip */ + + /* GEN6_GDRST is not in the gt power well, no need to check + * for fifo space for the write or forcewake the chip for + * the read + */ + I915_WRITE_NOTRACE(GEN6_GDRST, GEN6_GRDOM_FULL); + + /* Spin waiting for the device to ack the reset request */ + ret = wait_for((I915_READ_NOTRACE(GEN6_GDRST) & GEN6_GRDOM_FULL) == 0, 500); + + /* If reset with a user forcewake, try to restore, otherwise turn it off */ if (dev_priv->forcewake_count) dev_priv->display.force_wake_get(dev_priv); + else + dev_priv->display.force_wake_put(dev_priv); + + /* Restore fifo count */ + dev_priv->gt_fifo_count = I915_READ_NOTRACE(GT_FIFO_FREE_ENTRIES); + spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); return ret; } -- GitLab From c937504e2b96af3b281b1ef859e063ef4af656c1 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Fri, 6 Jan 2012 11:48:38 -0800 Subject: [PATCH 0070/1359] drm/i915: Hold gt_lock across forcewake register reads Along with the previous patch to make the reset operation protected by the gt_lock as well, this ensures that all register read operations will occur with the forcewake hardware enabled. As an added bonus, this makes read operations more efficient by taking the spinlock only once per read instead of twice. Signed-off-by: Keith Packard Reviewed-by: Daniel Vetter --- drivers/gpu/drm/i915/i915_drv.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_drv.c b/drivers/gpu/drm/i915/i915_drv.c index 062d1d27f704..308f81913562 100644 --- a/drivers/gpu/drm/i915/i915_drv.c +++ b/drivers/gpu/drm/i915/i915_drv.c @@ -954,9 +954,14 @@ MODULE_LICENSE("GPL and additional rights"); u##x i915_read##x(struct drm_i915_private *dev_priv, u32 reg) { \ u##x val = 0; \ if (NEEDS_FORCE_WAKE((dev_priv), (reg))) { \ - gen6_gt_force_wake_get(dev_priv); \ + unsigned long irqflags; \ + spin_lock_irqsave(&dev_priv->gt_lock, irqflags); \ + if (dev_priv->forcewake_count == 0) \ + dev_priv->display.force_wake_get(dev_priv); \ val = read##y(dev_priv->regs + reg); \ - gen6_gt_force_wake_put(dev_priv); \ + if (dev_priv->forcewake_count == 0) \ + dev_priv->display.force_wake_put(dev_priv); \ + spin_unlock_irqrestore(&dev_priv->gt_lock, irqflags); \ } else { \ val = read##y(dev_priv->regs + reg); \ } \ -- GitLab From 4cd53c0c8b01fc05c3ad5b2acdad02e37d3c2f55 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Fri, 14 Dec 2012 16:01:25 +0100 Subject: [PATCH 0071/1359] drm/i915: paper over missed irq issues with force wake voodoo Two things seem to do the trick on my ivb machine here: - prevent the gt from powering down while waiting for seqno notification interrupts by grabbing the force_wake in get_irq (and dropping it in put_irq again). - ordering writes from the ring's CS by reading a CS register, ACTHD seems to work. Only the blt&bsd ring on ivb seem to be massively affected by this, but for paranoia do this dance also on the render ring and on snb (i.e. all gpus with forcewake). Tested with Eric's glCopyPixels loop which without this patch scores a missed irq every few seconds. This patch needs my forcewake rework to use a spinlock instead of dev->struct_mutex. After crawling through docs a lot I've found the following nugget: Internal doc "SNB GT PM Programming Guide", Section 4.3.1: "GT does not generate interrupts while in RC6 (by design)" So it looks like rc6 and irq generation are indeed related. v2: Improve the comment per Eugeni Dodonov's suggestion. v3: Add the documentation snipped. Also restrict the w/a to ivb only for -fixes, as suggested by Keith Packard. Cc: stable@kernel.org Cc: Eric Anholt Cc: Kenneth Graunke Cc: Eugeni Dodonov Tested-by: Eugeni Dodonov Reviewed-by: Eugeni Dodonov Signed-Off-by: Daniel Vetter Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_ringbuffer.c | 27 +++++++++++++++++++++++-- 1 file changed, 25 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index 77e729d4e4f0..fa5702c5da42 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -635,6 +635,19 @@ render_ring_add_request(struct intel_ring_buffer *ring, return 0; } +static u32 +gen6_ring_get_seqno(struct intel_ring_buffer *ring) +{ + struct drm_device *dev = ring->dev; + + /* Workaround to force correct ordering between irq and seqno writes on + * ivb (and maybe also on snb) by reading from a CS register (like + * ACTHD) before reading the status page. */ + if (IS_GEN7(dev)) + intel_ring_get_active_head(ring); + return intel_read_status_page(ring, I915_GEM_HWS_INDEX); +} + static u32 ring_get_seqno(struct intel_ring_buffer *ring) { @@ -811,6 +824,12 @@ gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag) if (!dev->irq_enabled) return false; + /* It looks like we need to prevent the gt from suspending while waiting + * for an notifiy irq, otherwise irqs seem to get lost on at least the + * blt/bsd rings on ivb. */ + if (IS_GEN7(dev)) + gen6_gt_force_wake_get(dev_priv); + spin_lock(&ring->irq_lock); if (ring->irq_refcount++ == 0) { ring->irq_mask &= ~rflag; @@ -835,6 +854,9 @@ gen6_ring_put_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag) ironlake_disable_irq(dev_priv, gflag); } spin_unlock(&ring->irq_lock); + + if (IS_GEN7(dev)) + gen6_gt_force_wake_put(dev_priv); } static bool @@ -1341,7 +1363,7 @@ static const struct intel_ring_buffer gen6_bsd_ring = { .write_tail = gen6_bsd_ring_write_tail, .flush = gen6_ring_flush, .add_request = gen6_add_request, - .get_seqno = ring_get_seqno, + .get_seqno = gen6_ring_get_seqno, .irq_get = gen6_bsd_ring_get_irq, .irq_put = gen6_bsd_ring_put_irq, .dispatch_execbuffer = gen6_ring_dispatch_execbuffer, @@ -1476,7 +1498,7 @@ static const struct intel_ring_buffer gen6_blt_ring = { .write_tail = ring_write_tail, .flush = blt_ring_flush, .add_request = gen6_add_request, - .get_seqno = ring_get_seqno, + .get_seqno = gen6_ring_get_seqno, .irq_get = blt_ring_get_irq, .irq_put = blt_ring_put_irq, .dispatch_execbuffer = gen6_ring_dispatch_execbuffer, @@ -1499,6 +1521,7 @@ int intel_init_render_ring_buffer(struct drm_device *dev) ring->flush = gen6_render_ring_flush; ring->irq_get = gen6_render_ring_get_irq; ring->irq_put = gen6_render_ring_put_irq; + ring->get_seqno = gen6_ring_get_seqno; } else if (IS_GEN5(dev)) { ring->add_request = pc_render_add_request; ring->get_seqno = pc_render_get_seqno; -- GitLab From bdfcdb63795b058bba9e78d32102b39014f649fe Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Thu, 5 Jan 2012 01:05:26 +0100 Subject: [PATCH 0072/1359] drm/i915: rip out the HWSTAM missed irq workaround With the new ducttape of much finer quality, this seems to be no longer necessary. Tested on my ivb and snb machine with the usual suspects of testcases. (v2 by keithp -- limited change to IVB only for now) Signed-Off-by: Daniel Vetter Acked-by: Ben Widawsky Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_irq.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 5d433fc11ace..5bd4361ea84d 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -1751,7 +1751,8 @@ static void ironlake_irq_preinstall(struct drm_device *dev) INIT_WORK(&dev_priv->rps_work, gen6_pm_rps_work); I915_WRITE(HWSTAM, 0xeffe); - if (IS_GEN6(dev) || IS_GEN7(dev)) { + + if (IS_GEN6(dev)) { /* Workaround stalls observed on Sandy Bridge GPUs by * making the blitter command streamer generate a * write to the Hardware Status Page for -- GitLab From 5e540a5a7fd145ff7b2cdf8779b53349287c64a9 Mon Sep 17 00:00:00 2001 From: Shawn Guo Date: Fri, 13 Jan 2012 14:18:49 +0800 Subject: [PATCH 0073/1359] ARM: imx6: add missing twd_clk for imx6q clock With commit 5def51b (ARM: 7211/1: smp_twd: get the rate from a clock) hitting mainline, if we do not have a twd_clk for lookup, we will see the following error message in boot log. smp_twd: clock not found: -2 Actually we should add this clock regardless of the error message, so that we can: * Avoid the local timer calibrating at boot time * Make the local timer cpufreq aware on imx6q Signed-off-by: Shawn Guo --- arch/arm/mach-imx/clock-imx6q.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c index 9273c2a24b54..2d88f8b9a454 100644 --- a/arch/arm/mach-imx/clock-imx6q.c +++ b/arch/arm/mach-imx/clock-imx6q.c @@ -814,6 +814,16 @@ DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg); DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg); DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg); +static unsigned long twd_clk_get_rate(struct clk *clk) +{ + return clk_get_rate(clk->parent) / 2; +} + +static struct clk twd_clk = { + .parent = &arm_clk, + .get_rate = twd_clk_get_rate, +}; + static unsigned long pll2_200m_get_rate(struct clk *clk) { return clk_get_rate(clk->parent) / 2; @@ -1894,6 +1904,7 @@ static struct clk_lookup lookups[] = { _REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk), _REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk), _REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk), + _REGISTER_CLOCK("smp_twd", NULL, twd_clk), _REGISTER_CLOCK(NULL, "ckih", ckih_clk), _REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk), _REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk), -- GitLab From eacb6ec9ae5932ea02a44268684a56e4b5996ccf Mon Sep 17 00:00:00 2001 From: Daniel Borkmann Date: Thu, 19 Jan 2012 12:37:13 +0100 Subject: [PATCH 0074/1359] microblaze: generic atomic64 support This tiny patch adds generic atomic64 support for the Microblaze architecture. The patch is against the latest linux-2.6-microblaze tree. It also fixes the kernel build for microblaze: Error log: CC kernel/trace/trace_clock.o kernel/trace/trace_clock.c:117: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'trace_counter' kernel/trace/trace_clock.c: In function 'trace_clock_counter': kernel/trace/trace_clock.c:126: error: implicit declaration of function 'atomic64_add_return' kernel/trace/trace_clock.c:126: error: 'trace_counter' undeclared (first use in this function) kernel/trace/trace_clock.c:126: error: (Each undeclared identifier is reported only once kernel/trace/trace_clock.c:126: error: for each function it appears in.) make[2]: *** [kernel/trace/trace_clock.o] Error 1 make[1]: *** [kernel/trace] Error 2 make: *** [kernel] Error 2 Signed-off-by: Ariane Keller Signed-off-by: Daniel Borkmann Signed-off-by: Michal Simek --- arch/microblaze/Kconfig | 1 + arch/microblaze/include/asm/atomic.h | 1 + 2 files changed, 2 insertions(+) diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index 74f23a460ba2..c8d6efb99dbf 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -19,6 +19,7 @@ config MICROBLAZE select GENERIC_IRQ_SHOW select GENERIC_PCI_IOMAP select GENERIC_CPU_DEVICES + select GENERIC_ATOMIC64 config SWAP def_bool n diff --git a/arch/microblaze/include/asm/atomic.h b/arch/microblaze/include/asm/atomic.h index 6d2e1d418be7..615f53992c65 100644 --- a/arch/microblaze/include/asm/atomic.h +++ b/arch/microblaze/include/asm/atomic.h @@ -2,6 +2,7 @@ #define _ASM_MICROBLAZE_ATOMIC_H #include +#include /* * Atomically test *v and decrement if it is greater than 0. -- GitLab From a5fea953bbcff57f30cf5027ae63069a869f8e31 Mon Sep 17 00:00:00 2001 From: Philippe Langlais Date: Mon, 19 Dec 2011 08:52:43 +0100 Subject: [PATCH 0075/1359] mach-ux500: musb: now musb is always in OTG mode This change is needed after 622859634 "usb: musb: drop a gigantic amount of ifdeferry", where CONFIG_USB_MUSB_PERIPHERAL & CONFIG_USB_MUSB_HOST has been removed. Signed-off-by: Philippe Langlais Acked-by: Felipe Balbi Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/usb.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/arm/mach-ux500/usb.c b/arch/arm/mach-ux500/usb.c index 0a01cbdfe063..9f9e1c203061 100644 --- a/arch/arm/mach-ux500/usb.c +++ b/arch/arm/mach-ux500/usb.c @@ -95,13 +95,7 @@ static struct musb_hdrc_config musb_hdrc_config = { }; static struct musb_hdrc_platform_data musb_platform_data = { -#if defined(CONFIG_USB_MUSB_OTG) .mode = MUSB_OTG, -#elif defined(CONFIG_USB_MUSB_PERIPHERAL) - .mode = MUSB_PERIPHERAL, -#else /* defined(CONFIG_USB_MUSB_HOST) */ - .mode = MUSB_HOST, -#endif .config = &musb_hdrc_config, .board_data = &musb_board_data, }; -- GitLab From dd821823fad54d6ccc328e2f1b9698a6f9bd8f3e Mon Sep 17 00:00:00 2001 From: srinidhi kasagar Date: Tue, 17 Jan 2012 11:29:39 +0530 Subject: [PATCH 0076/1359] mach-ux500: do not override outer.inv_all Invalidating outer cache without disabling it is a big nono, and so, remove the machine specific outer.inv_all And at the same time it does not prevent us overriding outer.disable as we do not have any such secure SMI to handle the same while kexec disables the outer cache. Signed-off-by: Srinidhi Kasagar Reviewed-by: Will Deacon Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/cache-l2x0.c | 48 +++++--------------------------- 1 file changed, 7 insertions(+), 41 deletions(-) diff --git a/arch/arm/mach-ux500/cache-l2x0.c b/arch/arm/mach-ux500/cache-l2x0.c index 122ddde00ba7..da5569d83d58 100644 --- a/arch/arm/mach-ux500/cache-l2x0.c +++ b/arch/arm/mach-ux500/cache-l2x0.c @@ -12,44 +12,6 @@ static void __iomem *l2x0_base; -static inline void ux500_cache_wait(void __iomem *reg, unsigned long mask) -{ - /* wait for the operation to complete */ - while (readl_relaxed(reg) & mask) - cpu_relax(); -} - -static inline void ux500_cache_sync(void) -{ - writel_relaxed(0, l2x0_base + L2X0_CACHE_SYNC); - ux500_cache_wait(l2x0_base + L2X0_CACHE_SYNC, 1); -} - -/* - * The L2 cache cannot be turned off in the non-secure world. - * Dummy until a secure service is in place. - */ -static void ux500_l2x0_disable(void) -{ -} - -/* - * This is only called when doing a kexec, just after turning off the L2 - * and L1 cache, and it is surrounded by a spinlock in the generic version. - * However, we're not really turning off the L2 cache right now and the - * PL310 does not support exclusive accesses (used to implement the spinlock). - * So, the invalidation needs to be done without the spinlock. - */ -static void ux500_l2x0_inv_all(void) -{ - uint32_t l2x0_way_mask = (1<<16) - 1; /* Bitmask of active ways */ - - /* invalidate all ways */ - writel_relaxed(l2x0_way_mask, l2x0_base + L2X0_INV_WAY); - ux500_cache_wait(l2x0_base + L2X0_INV_WAY, l2x0_way_mask); - ux500_cache_sync(); -} - static int __init ux500_l2x0_unlock(void) { int i; @@ -85,9 +47,13 @@ static int __init ux500_l2x0_init(void) /* 64KB way size, 8 way associativity, force WA */ l2x0_init(l2x0_base, 0x3e060000, 0xc0000fff); - /* Override invalidate function */ - outer_cache.disable = ux500_l2x0_disable; - outer_cache.inv_all = ux500_l2x0_inv_all; + /* + * We can't disable l2 as we are in non secure mode, currently + * this seems be called only during kexec path. So let's + * override outer.disable with nasty assignment until we have + * some SMI service available. + */ + outer_cache.disable = NULL; return 0; } -- GitLab From d65015f7c5c5be9fd3f5e567889c844ba81bdc9c Mon Sep 17 00:00:00 2001 From: Srinidhi KASAGAR Date: Thu, 12 Jan 2012 11:07:43 +0530 Subject: [PATCH 0077/1359] mach-ux500: enable ARM errata 764369 This applies ARM errata 764369 for all ux500 platforms. Cc: stable@kernel.org Signed-off-by: Srinidhi Kasagar Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index a3e0c8692f0d..52af00446a63 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -7,6 +7,7 @@ config UX500_SOC_COMMON select HAS_MTU select ARM_ERRATA_753970 select ARM_ERRATA_754322 + select ARM_ERRATA_764369 menu "Ux500 SoC" -- GitLab From 2ab1159e80e8f416071e9f51e4f77b9173948296 Mon Sep 17 00:00:00 2001 From: Philippe Langlais Date: Fri, 20 Jan 2012 09:20:40 +0100 Subject: [PATCH 0078/1359] mach-ux500: no MMC_CAP_SD_HIGHSPEED on Snowball MMC_CAP_SD_HIGHSPEED is not supported on Snowball board resulting on initialization errors. Cc: stable@kernel.org Signed-off-by: Mathieu Poirier Signed-off-by: Fredrik Soderstedt Signed-off-by: Philippe Langlais Signed-off-by: Linus Walleij --- arch/arm/mach-ux500/board-mop500-sdi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 23be34b3bb6e..5dde4d4ebe88 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -261,6 +261,8 @@ void __init mop500_sdi_init(void) void __init snowball_sdi_init(void) { + /* On Snowball MMC_CAP_SD_HIGHSPEED isn't supported (Hardware issue?) */ + mop500_sdi0_data.capabilities &= ~MMC_CAP_SD_HIGHSPEED; /* On-board eMMC */ db8500_add_sdi4(&mop500_sdi4_data, U8500_SDI_V2_PERIPHID); /* External Micro SD slot */ -- GitLab From 3e90772f76010c315474bde59eaca7cc4c94d645 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 28 Dec 2011 13:10:04 +0200 Subject: [PATCH 0079/1359] ARM: at91: fix at91rm9200 soc subtype handling Currently setting it to PQFP changes subtype to BGA as subtypes are swapped in at91rm9200_set_type(). Wrong subtype causes GPIO bank D not to work at all. After this fix, subtype is still set as unknown. But board code should fill it in with proper value. Another information is thus printed. Bug discovery and first implementation made by Veli-Pekka Peltola. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Cc: stable --- arch/arm/mach-at91/setup.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index 8bdcc3cb6012..f524718d14fe 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -29,9 +29,12 @@ EXPORT_SYMBOL(at91_soc_initdata); void __init at91rm9200_set_type(int type) { if (type == ARCH_REVISON_9200_PQFP) - at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; - else at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP; + else + at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA; + + pr_info("AT91: filled in soc subtype: %s\n", + at91_get_soc_subtype(&at91_soc_initdata)); } void __init at91_init_irq_default(void) -- GitLab From 08a52e1bef7974176520df4ece9aafcf7c7d9ac3 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Fri, 6 Jan 2012 16:09:37 +0100 Subject: [PATCH 0080/1359] ARM: at91: removal of CAP9 SoC family Atmel CAP9 family is not maintained well and products may be difficult to find now. It will allow to save workforce and remove LOC during current cleanup process. Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD --- Documentation/feature-removal-schedule.txt | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 1bea46a54b1c..a0ffac029a0d 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -510,3 +510,17 @@ Why: The pci_scan_bus_parented() interface creates a new root bus. The convert to using pci_scan_root_bus() so they can supply a list of bus resources when the bus is created. Who: Bjorn Helgaas + +---------------------------- + +What: The CAP9 SoC family will be removed +When: 3.4 +Files: arch/arm/mach-at91/at91cap9.c + arch/arm/mach-at91/at91cap9_devices.c + arch/arm/mach-at91/include/mach/at91cap9.h + arch/arm/mach-at91/include/mach/at91cap9_matrix.h + arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h + arch/arm/mach-at91/board-cap9adk.c +Why: The code is not actively maintained and platforms are now hard to find. +Who: Nicolas Ferre + Jean-Christophe PLAGNIOL-VILLARD -- GitLab From 6813463cebf25089053cbe25245d15908f896716 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 8 Dec 2011 16:32:00 +0100 Subject: [PATCH 0081/1359] USB: at91: fix clk_get error handling Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Acked-by: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org --- drivers/usb/host/ohci-at91.c | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+) diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 5df0b0e3392b..dc33517982a4 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -139,8 +139,23 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, } iclk = clk_get(&pdev->dev, "ohci_clk"); + if (IS_ERR(iclk)) { + dev_err(&pdev->dev, "failed to get ohci_clk\n"); + retval = PTR_ERR(iclk); + goto err3; + } fclk = clk_get(&pdev->dev, "uhpck"); + if (IS_ERR(fclk)) { + dev_err(&pdev->dev, "failed to get uhpck\n"); + retval = PTR_ERR(fclk); + goto err4; + } hclk = clk_get(&pdev->dev, "hclk"); + if (IS_ERR(hclk)) { + dev_err(&pdev->dev, "failed to get hclk\n"); + retval = PTR_ERR(hclk); + goto err5; + } at91_start_hc(pdev); ohci_hcd_init(hcd_to_ohci(hcd)); @@ -153,9 +168,12 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, at91_stop_hc(pdev); clk_put(hclk); + err5: clk_put(fclk); + err4: clk_put(iclk); + err3: iounmap(hcd->regs); err2: -- GitLab From 8134ff55646bd2c059ddfd0d479882a06d6ef09a Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 8 Dec 2011 16:32:01 +0100 Subject: [PATCH 0082/1359] ARM/USB: at91/ohci-at91: rename vbus_pin_inverted to vbus_pin_active_low Allows to configure independently the vbus_pin associated with each port. Matches usual naming scheme. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre Acked-by: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org --- arch/arm/mach-at91/include/mach/board.h | 2 +- drivers/usb/host/ohci-at91.c | 6 ++++-- 2 files changed, 5 insertions(+), 3 deletions(-) diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index d0b377b21bd7..3b33f07b1e11 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -88,7 +88,7 @@ extern void __init at91_add_device_eth(struct macb_platform_data *data); struct at91_usbh_data { u8 ports; /* number of ports on root hub */ int vbus_pin[2]; /* port power-control pin */ - u8 vbus_pin_inverted; + u8 vbus_pin_active_low[2]; u8 overcurrent_supported; int overcurrent_pin[2]; u8 overcurrent_status[2]; diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index dc33517982a4..77afabc77f9b 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -244,7 +244,8 @@ static void ohci_at91_usb_set_power(struct at91_usbh_data *pdata, int port, int if (!gpio_is_valid(pdata->vbus_pin[port])) return; - gpio_set_value(pdata->vbus_pin[port], !pdata->vbus_pin_inverted ^ enable); + gpio_set_value(pdata->vbus_pin[port], + !pdata->vbus_pin_active_low[port] ^ enable); } static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) @@ -255,7 +256,8 @@ static int ohci_at91_usb_get_power(struct at91_usbh_data *pdata, int port) if (!gpio_is_valid(pdata->vbus_pin[port])) return -EINVAL; - return gpio_get_value(pdata->vbus_pin[port]) ^ !pdata->vbus_pin_inverted; + return gpio_get_value(pdata->vbus_pin[port]) ^ + !pdata->vbus_pin_active_low[port]; } /* -- GitLab From 6522ecdcfaae90ad1d2dd868fbdf3a2ddfc5f257 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 18 Nov 2011 00:28:29 +0800 Subject: [PATCH 0083/1359] ARM: at91: fix cap9 ddrsdr register fix AT91_DDRSDRC_MODE it's 3bit add missing AT91_DDRSDRC_NR_14, AT91_DDRSDRC_DBW (16 and 32 bits support) Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre --- arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h index 976f4a6c3353..d21932dcd6fa 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h +++ b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h @@ -16,7 +16,7 @@ #define AT91CAP9_DDRSDR_H #define AT91_DDRSDRC_MR 0x00 /* Mode Register */ -#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */ +#define AT91_DDRSDRC_MODE (0x7 << 0) /* Command Mode */ #define AT91_DDRSDRC_MODE_NORMAL 0 #define AT91_DDRSDRC_MODE_NOP 1 #define AT91_DDRSDRC_MODE_PRECHARGE 2 @@ -42,6 +42,7 @@ #define AT91_DDRSDRC_NR_11 (0 << 2) #define AT91_DDRSDRC_NR_12 (1 << 2) #define AT91_DDRSDRC_NR_13 (2 << 2) +#define AT91_DDRSDRC_NR_14 (3 << 2) #define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ #define AT91_DDRSDRC_CAS_2 (2 << 4) #define AT91_DDRSDRC_CAS_3 (3 << 4) @@ -86,6 +87,9 @@ #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 #define AT91_DDRSDRC_MD_DDR 2 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 +#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ +#define AT91_DDRSDRC_DBW_32BITS (0 << 4) +#define AT91_DDRSDRC_DBW_16BITS (1 << 4) #define AT91_DDRSDRC_DLLR 0x20 /* DLL Information Register */ #define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ -- GitLab From 17d2cc25f04462fd5d835318f02fb5492576ab4b Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 18 Nov 2011 00:36:21 +0800 Subject: [PATCH 0084/1359] ARM: at91: merge at91cap9_ddrsdr.h in at91sam9_ddrsdr.h Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre --- .../mach-at91/include/mach/at91cap9_ddrsdr.h | 112 ------------------ .../mach-at91/include/mach/at91sam9_ddrsdr.h | 30 +++-- arch/arm/mach-at91/pm.h | 8 +- arch/arm/mach-at91/pm_slowclock.S | 5 +- 4 files changed, 26 insertions(+), 129 deletions(-) delete mode 100644 arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h deleted file mode 100644 index d21932dcd6fa..000000000000 --- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h +++ /dev/null @@ -1,112 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h - * - * (C) 2008 Andrew Victor - * - * DDR/SDR Controller (DDRSDRC) - System peripherals registers. - * Based on AT91CAP9 datasheet revision B. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91CAP9_DDRSDR_H -#define AT91CAP9_DDRSDR_H - -#define AT91_DDRSDRC_MR 0x00 /* Mode Register */ -#define AT91_DDRSDRC_MODE (0x7 << 0) /* Command Mode */ -#define AT91_DDRSDRC_MODE_NORMAL 0 -#define AT91_DDRSDRC_MODE_NOP 1 -#define AT91_DDRSDRC_MODE_PRECHARGE 2 -#define AT91_DDRSDRC_MODE_LMR 3 -#define AT91_DDRSDRC_MODE_REFRESH 4 -#define AT91_DDRSDRC_MODE_EXT_LMR 5 -#define AT91_DDRSDRC_MODE_DEEP 6 - -#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */ -#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */ - -#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */ -#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */ -#define AT91_DDRSDRC_NC_SDR8 (0 << 0) -#define AT91_DDRSDRC_NC_SDR9 (1 << 0) -#define AT91_DDRSDRC_NC_SDR10 (2 << 0) -#define AT91_DDRSDRC_NC_SDR11 (3 << 0) -#define AT91_DDRSDRC_NC_DDR9 (0 << 0) -#define AT91_DDRSDRC_NC_DDR10 (1 << 0) -#define AT91_DDRSDRC_NC_DDR11 (2 << 0) -#define AT91_DDRSDRC_NC_DDR12 (3 << 0) -#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */ -#define AT91_DDRSDRC_NR_11 (0 << 2) -#define AT91_DDRSDRC_NR_12 (1 << 2) -#define AT91_DDRSDRC_NR_13 (2 << 2) -#define AT91_DDRSDRC_NR_14 (3 << 2) -#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */ -#define AT91_DDRSDRC_CAS_2 (2 << 4) -#define AT91_DDRSDRC_CAS_3 (3 << 4) -#define AT91_DDRSDRC_CAS_25 (6 << 4) -#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */ -#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ - -#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ -#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ -#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */ -#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */ -#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */ -#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ -#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ -#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ -#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ - -#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ -#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */ -#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */ -#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ -#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ - -#define AT91_DDRSDRC_LPR 0x18 /* Low Power Register */ -#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ -#define AT91_DDRSDRC_LPCB_DISABLE 0 -#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 -#define AT91_DDRSDRC_LPCB_POWER_DOWN 2 -#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3 -#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */ -#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */ -#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */ -#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */ -#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */ -#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12) -#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12) -#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12) - -#define AT91_DDRSDRC_MDR 0x1C /* Memory Device Register */ -#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ -#define AT91_DDRSDRC_MD_SDR 0 -#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 -#define AT91_DDRSDRC_MD_DDR 2 -#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 -#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ -#define AT91_DDRSDRC_DBW_32BITS (0 << 4) -#define AT91_DDRSDRC_DBW_16BITS (1 << 4) - -#define AT91_DDRSDRC_DLLR 0x20 /* DLL Information Register */ -#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ -#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ -#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ -#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ -#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ -#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ -#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ -#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ -#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ - -/* Register access macros */ -#define at91_ramc_read(num, reg) \ - at91_sys_read(AT91_DDRSDRC##num + reg) -#define at91_ramc_write(num, reg, value) \ - at91_sys_write(AT91_DDRSDRC##num + reg, value) - - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h index d27b15ba8ebf..e2f8da8ce5bc 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h +++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h @@ -46,10 +46,10 @@ #define AT91_DDRSDRC_CAS_25 (6 << 4) #define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */ #define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */ -#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL */ -#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver */ -#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared */ -#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y */ +#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL [SAM9 Only] */ +#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver [SAM9 Only] */ +#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared [SAM9 Only] */ +#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */ #define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */ #define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */ @@ -59,7 +59,8 @@ #define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */ #define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */ #define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */ -#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay */ +#define AT91CAP9_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */ +#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */ #define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */ #define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */ @@ -68,13 +69,14 @@ #define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */ #define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */ -#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register */ +#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register [SAM9 Only] */ #define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */ #define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */ #define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */ #define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */ #define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */ +#define AT91CAP9_DDRSDRC_LPR 0x18 /* Low Power Register */ #define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */ #define AT91_DDRSDRC_LPCB_DISABLE 0 #define AT91_DDRSDRC_LPCB_SELF_REFRESH 1 @@ -92,32 +94,40 @@ #define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */ #define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */ +#define AT91CAP9_DDRSDRC_MDR 0x1C /* Memory Device Register */ #define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */ #define AT91_DDRSDRC_MD_SDR 0 #define AT91_DDRSDRC_MD_LOW_POWER_SDR 1 +#define AT91CAP9_DDRSDRC_MD_DDR 2 #define AT91_DDRSDRC_MD_LOW_POWER_DDR 3 -#define AT91_DDRSDRC_MD_DDR2 6 +#define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */ #define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */ #define AT91_DDRSDRC_DBW_32BITS (0 << 4) #define AT91_DDRSDRC_DBW_16BITS (1 << 4) #define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */ +#define AT91CAP9_DDRSDRC_DLL 0x20 /* DLL Information Register */ #define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */ #define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */ #define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */ +#define AT91CAP9_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */ +#define AT91CAP9_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */ +#define AT91CAP9_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */ #define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */ +#define AT91CAP9_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */ +#define AT91CAP9_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */ -#define AT91_DDRSDRC_HS 0x2C /* High Speed Register */ +#define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */ #define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */ #define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */ -#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register */ +#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register [SAM9 Only] */ #define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */ #define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */ #define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */ -#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register */ +#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register [SAM9 Only] */ #define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */ #define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */ diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h index ce9a20699111..7eb40d24242f 100644 --- a/arch/arm/mach-at91/pm.h +++ b/arch/arm/mach-at91/pm.h @@ -25,21 +25,21 @@ static inline u32 sdram_selfrefresh_enable(void) : : "r" (0)) #elif defined(CONFIG_ARCH_AT91CAP9) -#include +#include static inline u32 sdram_selfrefresh_enable(void) { u32 saved_lpr, lpr; - saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR); + saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR); lpr = saved_lpr & ~AT91_DDRSDRC_LPCB; - at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); + at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH); return saved_lpr; } -#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr) +#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr) #define wait_for_interrupt_enable() cpu_do_idle() #elif defined(CONFIG_ARCH_AT91SAM9G45) diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index f7922a436172..92dfb8461392 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -18,9 +18,8 @@ #if defined(CONFIG_ARCH_AT91RM9200) #include -#elif defined(CONFIG_ARCH_AT91CAP9) -#include -#elif defined(CONFIG_ARCH_AT91SAM9G45) +#elif defined(CONFIG_ARCH_AT91CAP9) \ + || defined(CONFIG_ARCH_AT91SAM9G45) #include #else #include -- GitLab From c017759418fa4956f995e5eb595ea353ca6d9a3c Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Tue, 29 Nov 2011 22:01:08 +0800 Subject: [PATCH 0085/1359] ARM: at91: introduce AT91_SAM9_ALT_RESET to select the at91sam9 alternative reset Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre --- arch/arm/mach-at91/Kconfig | 9 +++++++++ arch/arm/mach-at91/Makefile | 13 +++++++------ 2 files changed, 16 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 4f991f295284..4275577fddc2 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -18,6 +18,9 @@ config HAVE_AT91_USART4 config HAVE_AT91_USART5 bool +config AT91_SAM9_ALT_RESET + bool + menu "Atmel AT91 System-on-Chip" choice @@ -39,6 +42,7 @@ config ARCH_AT91SAM9260 select HAVE_AT91_USART4 select HAVE_AT91_USART5 select HAVE_NET_MACB + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9261 bool "AT91SAM9261" @@ -46,6 +50,7 @@ config ARCH_AT91SAM9261 select GENERIC_CLOCKEVENTS select HAVE_FB_ATMEL select HAVE_AT91_DBGU0 + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G10 bool "AT91SAM9G10" @@ -53,6 +58,7 @@ config ARCH_AT91SAM9G10 select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9263 bool "AT91SAM9263" @@ -61,6 +67,7 @@ config ARCH_AT91SAM9263 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9RL bool "AT91SAM9RL" @@ -69,6 +76,7 @@ config ARCH_AT91SAM9RL select HAVE_AT91_USART3 select HAVE_FB_ATMEL select HAVE_AT91_DBGU0 + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G20 bool "AT91SAM9G20" @@ -79,6 +87,7 @@ config ARCH_AT91SAM9G20 select HAVE_AT91_USART4 select HAVE_AT91_USART5 select HAVE_NET_MACB + select AT91_SAM9_ALT_RESET config ARCH_AT91SAM9G45 bool "AT91SAM9G45" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index 242174f9f355..e8e961bb5f33 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -8,15 +8,16 @@ obj-n := obj- := obj-$(CONFIG_AT91_PMC_UNIT) += clock.o +obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o # CPU-specific support obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o -obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o at91sam9_alt_reset.o -obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o +obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o +obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o -- GitLab From e9f68b5cc6160a473fc668054fd13f435fd4508b Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 18 Nov 2011 01:25:52 +0800 Subject: [PATCH 0086/1359] ARM: at91: make rstc soc independent Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre --- arch/arm/mach-at91/at91cap9.c | 1 + arch/arm/mach-at91/at91sam9260.c | 1 + arch/arm/mach-at91/at91sam9261.c | 1 + arch/arm/mach-at91/at91sam9263.c | 1 + arch/arm/mach-at91/at91sam9_alt_reset.S | 7 +++---- arch/arm/mach-at91/at91sam9g45.c | 1 + arch/arm/mach-at91/at91sam9rl.c | 1 + arch/arm/mach-at91/generic.h | 1 + arch/arm/mach-at91/include/mach/at91_rstc.h | 18 +++++++++++++++--- arch/arm/mach-at91/include/mach/at91cap9.h | 2 +- arch/arm/mach-at91/include/mach/at91sam9260.h | 2 +- arch/arm/mach-at91/include/mach/at91sam9261.h | 2 +- arch/arm/mach-at91/include/mach/at91sam9263.h | 2 +- arch/arm/mach-at91/include/mach/at91sam9g45.h | 2 +- arch/arm/mach-at91/include/mach/at91sam9rl.h | 2 +- arch/arm/mach-at91/pm.c | 9 ++------- arch/arm/mach-at91/setup.c | 9 +++++++++ 17 files changed, 42 insertions(+), 20 deletions(-) diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index edb879ac04c8..7a2309e0d984 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -331,6 +331,7 @@ static void __init at91cap9_map_io(void) static void __init at91cap9_ioremap_registers(void) { at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC); + at91_ioremap_rstc(AT91CAP9_BASE_RSTC); at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT); at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC); } diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 5e46e4a96430..d4036ba43612 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -323,6 +323,7 @@ static void __init at91sam9260_map_io(void) static void __init at91sam9260_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9260_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC); } diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index b85b9ea60170..023c2ff138df 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -281,6 +281,7 @@ static void __init at91sam9261_map_io(void) static void __init at91sam9261_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9261_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC); } diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 79e3669b1117..75e876c258af 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -301,6 +301,7 @@ static void __init at91sam9263_map_io(void) static void __init at91sam9263_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9263_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0); at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1); diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S index d3f931c5942e..518e42377171 100644 --- a/arch/arm/mach-at91/at91sam9_alt_reset.S +++ b/arch/arm/mach-at91/at91sam9_alt_reset.S @@ -23,7 +23,8 @@ .globl at91sam9_alt_restart at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants - ldr r1, .at91_va_base_rstc_cr + ldr r1, =at91_rstc_base + ldr r1, [r1] mov r2, #1 mov r3, #AT91_SDRAMC_LPCB_POWER_DOWN @@ -33,11 +34,9 @@ at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants str r2, [r0, #AT91_SDRAMC_TR] @ disable SDRAM access str r3, [r0, #AT91_SDRAMC_LPR] @ power down SDRAM - str r4, [r1] @ reset processor + str r4, [r1, #AT91_RSTC_CR] @ reset processor b . .at91_va_base_sdramc: .word AT91_VA_BASE_SYS + AT91_SDRAMC0 -.at91_va_base_rstc_cr: - .word AT91_VA_BASE_SYS + AT91_RSTC_CR diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 7032dd32cdf0..ec6a2db9ea69 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -336,6 +336,7 @@ static void __init at91sam9g45_map_io(void) static void __init at91sam9g45_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC); } diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index d6bcb1da11df..d2c91a841cb8 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -286,6 +286,7 @@ static void __init at91sam9rl_map_io(void) static void __init at91sam9rl_ioremap_registers(void) { at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC); + at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC); at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT); at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC); } diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 4866b8180d66..62e508b71ec2 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -58,6 +58,7 @@ extern void at91_irq_suspend(void); extern void at91_irq_resume(void); /* reset */ +extern void at91_ioremap_rstc(u32 base_addr); extern void at91sam9_alt_restart(char, const char *); /* shutdown */ diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h index cbd2bf052c1f..875fa336800b 100644 --- a/arch/arm/mach-at91/include/mach/at91_rstc.h +++ b/arch/arm/mach-at91/include/mach/at91_rstc.h @@ -16,13 +16,25 @@ #ifndef AT91_RSTC_H #define AT91_RSTC_H -#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */ +#ifndef __ASSEMBLY__ +extern void __iomem *at91_rstc_base; + +#define at91_rstc_read(field) \ + __raw_readl(at91_rstc_base + field) + +#define at91_rstc_write(field, value) \ + __raw_writel(value, at91_rstc_base + field); +#else +.extern at91_rstc_base +#endif + +#define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */ #define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */ #define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */ #define AT91_RSTC_EXTRST (1 << 3) /* External Reset */ #define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */ -#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */ +#define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */ #define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */ #define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */ #define AT91_RSTC_RSTTYP_GENERAL (0 << 8) @@ -33,7 +45,7 @@ #define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */ #define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */ -#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */ +#define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */ #define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */ #define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */ #define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */ diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h index 4c0e2f6011d7..61d952902f2b 100644 --- a/arch/arm/mach-at91/include/mach/at91cap9.h +++ b/arch/arm/mach-at91/include/mach/at91cap9.h @@ -83,7 +83,6 @@ #define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (cpu_is_at91cap9_revB() ? \ (0xfffffd50 - AT91_BASE_SYS) : \ (0xfffffd60 - AT91_BASE_SYS)) @@ -96,6 +95,7 @@ #define AT91CAP9_BASE_PIOB 0xfffff400 #define AT91CAP9_BASE_PIOC 0xfffff600 #define AT91CAP9_BASE_PIOD 0xfffff800 +#define AT91CAP9_BASE_RSTC 0xfffffd00 #define AT91CAP9_BASE_SHDWC 0xfffffd10 #define AT91CAP9_BASE_RTT 0xfffffd20 #define AT91CAP9_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h index f937c476bb67..fa5ca278adeb 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9260.h +++ b/arch/arm/mach-at91/include/mach/at91sam9260.h @@ -83,7 +83,6 @@ #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) #define AT91SAM9260_BASE_ECC 0xffffe800 @@ -92,6 +91,7 @@ #define AT91SAM9260_BASE_PIOA 0xfffff400 #define AT91SAM9260_BASE_PIOB 0xfffff600 #define AT91SAM9260_BASE_PIOC 0xfffff800 +#define AT91SAM9260_BASE_RSTC 0xfffffd00 #define AT91SAM9260_BASE_SHDWC 0xfffffd10 #define AT91SAM9260_BASE_RTT 0xfffffd20 #define AT91SAM9260_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h index 175604e261be..7cde2d36570e 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9261.h +++ b/arch/arm/mach-at91/include/mach/at91sam9261.h @@ -68,7 +68,6 @@ #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS) #define AT91SAM9261_BASE_SMC 0xffffec00 @@ -76,6 +75,7 @@ #define AT91SAM9261_BASE_PIOA 0xfffff400 #define AT91SAM9261_BASE_PIOB 0xfffff600 #define AT91SAM9261_BASE_PIOC 0xfffff800 +#define AT91SAM9261_BASE_RSTC 0xfffffd00 #define AT91SAM9261_BASE_SHDWC 0xfffffd10 #define AT91SAM9261_BASE_RTT 0xfffffd20 #define AT91SAM9261_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h index 80c915002d83..5949abda962b 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9263.h +++ b/arch/arm/mach-at91/include/mach/at91sam9263.h @@ -78,7 +78,6 @@ #define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) #define AT91SAM9263_BASE_ECC0 0xffffe000 @@ -91,6 +90,7 @@ #define AT91SAM9263_BASE_PIOC 0xfffff600 #define AT91SAM9263_BASE_PIOD 0xfffff800 #define AT91SAM9263_BASE_PIOE 0xfffffa00 +#define AT91SAM9263_BASE_RSTC 0xfffffd00 #define AT91SAM9263_BASE_SHDWC 0xfffffd10 #define AT91SAM9263_BASE_RTT0 0xfffffd20 #define AT91SAM9263_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h index f0c23c960dec..dd9c95ea0862 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9g45.h +++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h @@ -90,7 +90,6 @@ #define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) #define AT91SAM9G45_BASE_ECC 0xffffe200 @@ -102,6 +101,7 @@ #define AT91SAM9G45_BASE_PIOC 0xfffff600 #define AT91SAM9G45_BASE_PIOD 0xfffff800 #define AT91SAM9G45_BASE_PIOE 0xfffffa00 +#define AT91SAM9G45_BASE_RSTC 0xfffffd00 #define AT91SAM9G45_BASE_SHDWC 0xfffffd10 #define AT91SAM9G45_BASE_RTT 0xfffffd20 #define AT91SAM9G45_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h index 2bb359e60b97..d7bead7118da 100644 --- a/arch/arm/mach-at91/include/mach/at91sam9rl.h +++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h @@ -72,7 +72,6 @@ #define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS) #define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS) #define AT91_PMC (0xfffffc00 - AT91_BASE_SYS) -#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS) #define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS) #define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS) @@ -84,6 +83,7 @@ #define AT91SAM9RL_BASE_PIOB 0xfffff600 #define AT91SAM9RL_BASE_PIOC 0xfffff800 #define AT91SAM9RL_BASE_PIOD 0xfffffa00 +#define AT91SAM9RL_BASE_RSTC 0xfffffd00 #define AT91SAM9RL_BASE_SHDWC 0xfffffd10 #define AT91SAM9RL_BASE_RTT 0xfffffd20 #define AT91SAM9RL_BASE_PIT 0xfffffd30 diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 62ad95556c36..1606379ac284 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -34,7 +34,6 @@ /* * Show the reason for the previous system reset. */ -#if defined(AT91_RSTC) #include #include @@ -58,10 +57,10 @@ static void __init show_reset_status(void) char *reason, *r2 = reset; u32 reset_type, wake_type; - if (!at91_shdwc_base) + if (!at91_shdwc_base || !at91_rstc_base) return; - reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; + reset_type = at91_rstc_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP; wake_type = at91_shdwc_read(AT91_SHDW_SR); switch (reset_type) { @@ -102,10 +101,6 @@ static void __init show_reset_status(void) } pr_info("AT91: Starting after %s %s\n", reason, r2); } -#else -static void __init show_reset_status(void) {} -#endif - static int at91_pm_valid_state(suspend_state_t state) { diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index f524718d14fe..69d3fc4c46f3 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -284,6 +284,15 @@ void __init at91_ioremap_shdwc(u32 base_addr) pm_power_off = at91sam9_poweroff; } +void __iomem *at91_rstc_base; + +void __init at91_ioremap_rstc(u32 base_addr) +{ + at91_rstc_base = ioremap(base_addr, 16); + if (!at91_rstc_base) + panic("Impossible to ioremap at91_rstc_base\n"); +} + void __init at91_initialize(unsigned long main_clock) { at91_boot_soc.ioremap_registers(); -- GitLab From 14f991a730f453a1c8f114ccb686f83e158fdd92 Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Fri, 18 Nov 2011 01:41:28 +0800 Subject: [PATCH 0087/1359] ARM: at91: Fix at91sam9g45 and at91cap9 reset As on the other sam9 we need to cleanly shutdown the DDRAM before rebooting. On those SoC the SDRAM/DDRAM controller is different. So, the assembly code ends up being not cleanly combined with previous at91sam9_alt_restart function. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Acked-by: Nicolas Ferre --- arch/arm/mach-at91/Kconfig | 5 ++++ arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/at91cap9.c | 8 +----- arch/arm/mach-at91/at91sam9g45.c | 6 ---- arch/arm/mach-at91/at91sam9g45_reset.S | 40 ++++++++++++++++++++++++++ arch/arm/mach-at91/generic.h | 1 + 6 files changed, 48 insertions(+), 13 deletions(-) create mode 100644 arch/arm/mach-at91/at91sam9g45_reset.S diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 4275577fddc2..71feb00a1e99 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -21,6 +21,9 @@ config HAVE_AT91_USART5 config AT91_SAM9_ALT_RESET bool +config AT91_SAM9G45_RESET + bool + menu "Atmel AT91 System-on-Chip" choice @@ -97,6 +100,7 @@ config ARCH_AT91SAM9G45 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 + select AT91_SAM9G45_RESET config ARCH_AT91CAP9 bool "AT91CAP9" @@ -105,6 +109,7 @@ config ARCH_AT91CAP9 select HAVE_FB_ATMEL select HAVE_NET_MACB select HAVE_AT91_DBGU1 + select AT91_SAM9G45_RESET config ARCH_AT91X40 bool "AT91x40" diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile index e8e961bb5f33..705e1fbded39 100644 --- a/arch/arm/mach-at91/Makefile +++ b/arch/arm/mach-at91/Makefile @@ -9,6 +9,7 @@ obj- := obj-$(CONFIG_AT91_PMC_UNIT) += clock.o obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o +obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o # CPU-specific support obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c index 7a2309e0d984..a42edc25a87e 100644 --- a/arch/arm/mach-at91/at91cap9.c +++ b/arch/arm/mach-at91/at91cap9.c @@ -21,7 +21,6 @@ #include #include #include -#include #include "soc.h" #include "generic.h" @@ -314,11 +313,6 @@ static struct at91_gpio_bank at91cap9_gpio[] __initdata = { } }; -static void at91cap9_restart(char mode, const char *cmd) -{ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -} - /* -------------------------------------------------------------------- * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ @@ -338,7 +332,7 @@ static void __init at91cap9_ioremap_registers(void) static void __init at91cap9_initialize(void) { - arm_pm_restart = at91cap9_restart; + arm_pm_restart = at91sam9g45_restart; at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); /* Register GPIO subsystem */ diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index ec6a2db9ea69..1cb6a96b1c1e 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -18,7 +18,6 @@ #include #include #include -#include #include #include "soc.h" @@ -318,11 +317,6 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = { } }; -static void at91sam9g45_restart(char mode, const char *cmd) -{ - at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); -} - /* -------------------------------------------------------------------- * AT91SAM9G45 processor initialization * -------------------------------------------------------------------- */ diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S new file mode 100644 index 000000000000..0468be10980b --- /dev/null +++ b/arch/arm/mach-at91/at91sam9g45_reset.S @@ -0,0 +1,40 @@ +/* + * reset AT91SAM9G45 as per errata + * + * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD + * + * unless the SDRAM is cleanly shutdown before we hit the + * reset register it can be left driving the data bus and + * killing the chance of a subsequent boot from NAND + * + * GPLv2 Only + */ + +#include +#include +#include +#include + + .arm + + .globl at91sam9g45_restart + +at91sam9g45_restart: + ldr r0, .at91_va_base_sdramc0 @ preload constants + ldr r1, =at91_rstc_base + ldr r1, [r1] + + mov r2, #1 + mov r3, #AT91_DDRSDRC_LPCB_POWER_DOWN + ldr r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST + + .balign 32 @ align to cache line + + str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access + str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0 + str r4, [r1, #AT91_RSTC_CR] @ reset processor + + b . + +.at91_va_base_sdramc0: + .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 62e508b71ec2..594133451c0c 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -60,6 +60,7 @@ extern void at91_irq_resume(void); /* reset */ extern void at91_ioremap_rstc(u32 base_addr); extern void at91sam9_alt_restart(char, const char *); +extern void at91sam9g45_restart(char, const char *); /* shutdown */ extern void at91_ioremap_shdwc(u32 base_addr); -- GitLab From 6c5aa407d52e9e40c2e31a3dfa5cb19a9672bf36 Mon Sep 17 00:00:00 2001 From: "Cousson, Benoit" Date: Fri, 20 Jan 2012 16:55:04 +0100 Subject: [PATCH 0088/1359] i2c: OMAP: Fix OMAP1 build error CONFIG_OF is not defined for OMAP1 yet and thus the omap1_defconfig build generate an error for 3.3-rc1. drivers/i2c/busses/i2c-omap.c: In function 'omap_i2c_probe': drivers/i2c/busses/i2c-omap.c:1021:26: error: 'omap_i2c_of_match' undeclared (first use in this function) drivers/i2c/busses/i2c-omap.c:1021:26: note: each undeclared identifier is reported only once for each function it appears in Wrap omap_i2c_of_match with of_match_ptr() to prevent compilation error in case of OMAP1 build. Signed-off-by: Benoit Cousson Cc: Ben Dooks Signed-off-by: Tony Lindgren --- drivers/i2c/busses/i2c-omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index f713eac55047..801df6000e9b 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -1018,7 +1018,7 @@ omap_i2c_probe(struct platform_device *pdev) goto err_release_region; } - match = of_match_device(omap_i2c_of_match, &pdev->dev); + match = of_match_device(of_match_ptr(omap_i2c_of_match), &pdev->dev); if (match) { u32 freq = 100000; /* default to 100000 Hz */ -- GitLab From 7080727c207f569751e94aaed7d94e873c69115f Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Fri, 20 Jan 2012 05:38:30 -0800 Subject: [PATCH 0089/1359] ARM: OMAP2: fix omap3 touchbook kconfig warning warning: (MACH_OMAP3_TOUCHBOOK && DRM_RADEON_KMS && DRM_I915 && STUB_POULSBO && FB_BACKLIGHT && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_ASUS && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) A lot of boards need BACKLIGHT_CLASS_DEVICE for the framebuffers to work, but it's not *needed* for the device itself. It might be nice to enable it by default somewhoe if graphics stuff is enabled, but that's another story. Signed-off-by: Felipe Contreras Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a8ba7b96dcd1..782a909b3331 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -220,7 +220,6 @@ config MACH_OMAP3_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 default y - select BACKLIGHT_CLASS_DEVICE config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" -- GitLab From a075ccc6810dd2532d6bca548bd6e3b59105bd82 Mon Sep 17 00:00:00 2001 From: Felipe Contreras Date: Fri, 20 Jan 2012 05:38:31 -0800 Subject: [PATCH 0090/1359] ARM: OMAP2: fix regulator warnings warning: (MACH_OMAP_ZOOM2 && MACH_OMAP_ZOOM3 && MACH_OMAP_4430SDP && MACH_OMAP4_PANDA && TPS6105X) selects REGULATOR_FIXED_VOLTAGE which has unmet direct dependencies (REGULATOR) Signed-off-by: Felipe Contreras Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 782a909b3331..c7261082f00d 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -214,7 +214,7 @@ config MACH_OMAP3_PANDORA depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP3_TOUCHBOOK bool "OMAP3 Touch Book" @@ -265,7 +265,7 @@ config MACH_OMAP_ZOOM2 select SERIAL_8250 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" @@ -275,7 +275,7 @@ config MACH_OMAP_ZOOM3 select SERIAL_8250 select SERIAL_CORE_CONSOLE select SERIAL_8250_CONSOLE - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_CM_T35 bool "CompuLab CM-T35/CM-T3730 modules" @@ -334,7 +334,7 @@ config MACH_OMAP_4430SDP depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config MACH_OMAP4_PANDA bool "OMAP4 Panda Board" @@ -342,7 +342,7 @@ config MACH_OMAP4_PANDA depends on ARCH_OMAP4 select OMAP_PACKAGE_CBL select OMAP_PACKAGE_CBS - select REGULATOR_FIXED_VOLTAGE + select REGULATOR_FIXED_VOLTAGE if REGULATOR config OMAP3_EMU bool "OMAP3 debugging peripherals" -- GitLab From 7c655099b25c889c1268dba894fbc5d515097752 Mon Sep 17 00:00:00 2001 From: Bas van den Berg Date: Mon, 16 Jan 2012 07:46:02 +0100 Subject: [PATCH 0091/1359] ARM: davinci: DA850: remove non-existing pll1_sysclk4-7 clocks DA850: sysclk4-7 only exist for pll0. for pll1 sysclk1-3 exist. Remove the non-existing clocks. Signed-off-by: Bas van den Berg Signed-off-by: Sekhar Nori --- arch/arm/mach-davinci/da850.c | 32 -------------------------------- 1 file changed, 32 deletions(-) diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 0ed7fdb64efb..992c4c410185 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -153,34 +153,6 @@ static struct clk pll1_sysclk3 = { .div_reg = PLLDIV3, }; -static struct clk pll1_sysclk4 = { - .name = "pll1_sysclk4", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV4, -}; - -static struct clk pll1_sysclk5 = { - .name = "pll1_sysclk5", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV5, -}; - -static struct clk pll1_sysclk6 = { - .name = "pll0_sysclk6", - .parent = &pll0_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV6, -}; - -static struct clk pll1_sysclk7 = { - .name = "pll1_sysclk7", - .parent = &pll1_clk, - .flags = CLK_PLL, - .div_reg = PLLDIV7, -}; - static struct clk i2c0_clk = { .name = "i2c0", .parent = &pll0_aux_clk, @@ -397,10 +369,6 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "pll1_aux", &pll1_aux_clk), CLK(NULL, "pll1_sysclk2", &pll1_sysclk2), CLK(NULL, "pll1_sysclk3", &pll1_sysclk3), - CLK(NULL, "pll1_sysclk4", &pll1_sysclk4), - CLK(NULL, "pll1_sysclk5", &pll1_sysclk5), - CLK(NULL, "pll1_sysclk6", &pll1_sysclk6), - CLK(NULL, "pll1_sysclk7", &pll1_sysclk7), CLK("i2c_davinci.1", NULL, &i2c0_clk), CLK(NULL, "timer0", &timerp64_0_clk), CLK("watchdog", NULL, &timerp64_1_clk), -- GitLab From b469d4329cf949043f9b93a6644f2c64015ef8cd Mon Sep 17 00:00:00 2001 From: Tiejun Chen Date: Wed, 11 Jan 2012 05:51:10 +0000 Subject: [PATCH 0092/1359] kmemleak: Only scan non-zero-size areas Kmemleak should only track valid scan areas with a non-zero size. Otherwise, such area may reside just at the end of an object and kmemleak would report "Adding scan area to unknown object". Signed-off-by: Tiejun Chen Signed-off-by: Catalin Marinas --- mm/kmemleak.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index c833addd94d7..f9f7310f0fdb 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1036,7 +1036,7 @@ void __ref kmemleak_scan_area(const void *ptr, size_t size, gfp_t gfp) { pr_debug("%s(0x%p)\n", __func__, ptr); - if (atomic_read(&kmemleak_enabled) && ptr && !IS_ERR(ptr)) + if (atomic_read(&kmemleak_enabled) && ptr && size && !IS_ERR(ptr)) add_scan_area((unsigned long)ptr, size, gfp); else if (atomic_read(&kmemleak_early_log)) log_early(KMEMLEAK_SCAN_AREA, ptr, size, 0); -- GitLab From 546edd83abe4f03472d721c60011c5ff95e25474 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 6 Jan 2012 13:38:31 -0700 Subject: [PATCH 0093/1359] pinctrl: fix pinconf_pins_show iteration Commit 706e852 "pinctrl: correct a offset while enumerating pins" modified the variable used by pinconf_pin_show()'s for loop, but didn't update the for loop test expression. Signed-off-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/pinconf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index 1259872b0a1d..1892a3794b99 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -236,7 +236,7 @@ static int pinconf_pins_show(struct seq_file *s, void *what) seq_puts(s, "Format: pin (name): pinmux setting array\n"); /* The pin number can be retrived from the pin controller descriptor */ - for (i = 0; pin < pctldev->desc->npins; i++) { + for (i = 0; i < pctldev->desc->npins; i++) { struct pin_desc *desc; pin = pctldev->desc->pins[i].number; -- GitLab From b370d29ea7565a638ccf85389488364b5abb39fa Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 20 Jan 2012 10:42:40 +0000 Subject: [PATCH 0094/1359] kmemleak: Disable early logging when kmemleak is off by default Commit b6693005 (kmemleak: When the early log buffer is exceeded, report the actual number) deferred the disabling of the early logging to kmemleak_init(). However, when CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y, the early logging was no longer disabled causing __init kmemleak functions to be called even after the kernel freed the init memory. This patch disables the early logging during kmemleak_init() if kmemleak is left disabled. Reported-by: Dirk Gouders Tested-by: Dirk Gouders Tested-by: Josh Boyer Signed-off-by: Catalin Marinas --- mm/kmemleak.c | 1 + 1 file changed, 1 insertion(+) diff --git a/mm/kmemleak.c b/mm/kmemleak.c index f9f7310f0fdb..45eb6217bf38 100644 --- a/mm/kmemleak.c +++ b/mm/kmemleak.c @@ -1757,6 +1757,7 @@ void __init kmemleak_init(void) #ifdef CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF if (!kmemleak_skip_disable) { + atomic_set(&kmemleak_early_log, 0); kmemleak_disable(); return; } -- GitLab From 86b2bbfdbd1fcc4a3aa62ccd3f245c40c5ad5b85 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Fri, 20 Jan 2012 10:09:23 -0500 Subject: [PATCH 0095/1359] hwmon: (f71805f) Fix clamping of temperature limits Properly clamp temperature limits set by the user. Without this fix, attempts to write temperature limits above the maximum supported by the chip (255 degrees Celsius) would arbitrarily and unexpectedly result in the limit being set to 0 degree Celsius. Signed-off-by: Jean Delvare Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck --- drivers/hwmon/f71805f.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c index 92f949767ece..6dbfd3e516e4 100644 --- a/drivers/hwmon/f71805f.c +++ b/drivers/hwmon/f71805f.c @@ -283,11 +283,11 @@ static inline long temp_from_reg(u8 reg) static inline u8 temp_to_reg(long val) { - if (val < 0) - val = 0; - else if (val > 1000 * 0xff) - val = 0xff; - return ((val + 500) / 1000); + if (val <= 0) + return 0; + if (val >= 1000 * 0xff) + return 0xff; + return (val + 500) / 1000; } /* -- GitLab From 26dd8e0291fd699142722632c6588a438d6ef0e4 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Sat, 21 Jan 2012 00:15:23 +0900 Subject: [PATCH 0096/1359] percpu: use bitmap_clear Use bitmap_clear rather than clearing individual bits in a memory region. Signed-off-by: Akinobu Mita Acked-by: Christoph Lameter Signed-off-by: Tejun Heo --- mm/percpu-vm.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/mm/percpu-vm.c b/mm/percpu-vm.c index 12a48a88c0d8..405d331804c3 100644 --- a/mm/percpu-vm.c +++ b/mm/percpu-vm.c @@ -184,8 +184,7 @@ static void pcpu_unmap_pages(struct pcpu_chunk *chunk, page_end - page_start); } - for (i = page_start; i < page_end; i++) - __clear_bit(i, populated); + bitmap_clear(populated, page_start, page_end - page_start); } /** -- GitLab From 216f63c41cac9f9f8f181fc19be399293c8c934e Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Jan 2012 17:37:21 +0000 Subject: [PATCH 0097/1359] Revert "ARM: sa1100: Refactor mcp-sa11x0 to use platform resources." This reverts commit af9081ae64b941d32239b947882cd59ba855c5db. This revert is necessary to revert 5dd7bf59e0e8563265b3e5b33276099ef628fcc7. --- arch/arm/mach-sa1100/assabet.c | 11 --- arch/arm/mach-sa1100/cerf.c | 10 -- arch/arm/mach-sa1100/collie.c | 10 -- arch/arm/mach-sa1100/generic.c | 7 +- arch/arm/mach-sa1100/lart.c | 9 -- arch/arm/mach-sa1100/shannon.c | 10 -- arch/arm/mach-sa1100/simpad.c | 10 -- drivers/mfd/mcp-sa11x0.c | 162 +++++++++++---------------------- 8 files changed, 53 insertions(+), 176 deletions(-) diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index ebafe8aa8956..d8aa1c28353b 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -253,17 +253,6 @@ static void __init assabet_init(void) sa11x0_register_mtd(&assabet_flash_data, assabet_flash_resources, ARRAY_SIZE(assabet_flash_resources)); sa11x0_register_irda(&assabet_irda_data); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - - ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); sa11x0_register_mcp(&assabet_mcp_data); } diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index d12d0f48b1dc..fcadc4cafe9a 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -131,16 +131,6 @@ static void __init cerf_init(void) { platform_add_devices(cerf_devices, ARRAY_SIZE(cerf_devices)); sa11x0_register_mtd(&cerf_flash_data, &cerf_flash_resource, 1); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&cerf_mcp_data); } diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index c483912d08af..6b7c74b304cf 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -357,16 +357,6 @@ static void __init collie_init(void) sa11x0_register_mtd(&collie_flash_data, collie_flash_resources, ARRAY_SIZE(collie_flash_resources)); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&collie_mcp_data); sharpsl_save_param(); diff --git a/arch/arm/mach-sa1100/generic.c b/arch/arm/mach-sa1100/generic.c index e3a28ca2a7b7..480d2ea46b00 100644 --- a/arch/arm/mach-sa1100/generic.c +++ b/arch/arm/mach-sa1100/generic.c @@ -217,15 +217,10 @@ static struct platform_device sa11x0uart3_device = { static struct resource sa11x0mcp_resources[] = { [0] = { .start = __PREG(Ser4MCCR0), - .end = __PREG(Ser4MCCR0) + 0x1C - 1, + .end = __PREG(Ser4MCCR0) + 0xffff, .flags = IORESOURCE_MEM, }, [1] = { - .start = __PREG(Ser4MCCR1), - .end = __PREG(Ser4MCCR1) + 0x4 - 1, - .flags = IORESOURCE_MEM, - }, - [2] = { .start = IRQ_Ser4MCP, .end = IRQ_Ser4MCP, .flags = IORESOURCE_IRQ, diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index d117ceab6215..48a8f4ef0fcd 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -29,15 +29,6 @@ static struct mcp_plat_data lart_mcp_data = { static void __init lart_init(void) { - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&lart_mcp_data); } diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 748d34435b3f..3807c9135272 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -61,16 +61,6 @@ static struct mcp_plat_data shannon_mcp_data = { static void __init shannon_init(void) { sa11x0_register_mtd(&shannon_flash_data, &shannon_flash_resource, 1); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&shannon_mcp_data); } diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index 458ececefa58..d9b765c441f6 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -384,16 +384,6 @@ static int __init simpad_init(void) sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources, ARRAY_SIZE(simpad_flash_resources)); - - /* - * Setup the PPC unit correctly. - */ - PPDR &= ~PPC_RXD4; - PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; - PSDR |= PPC_RXD4; - PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); - sa11x0_register_mcp(&simpad_mcp_data); ret = platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index 9adc2eb69492..da4e077a1bee 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include @@ -27,19 +26,12 @@ #include #include -/* Register offsets */ -#define MCCR0 0x00 -#define MCDR0 0x08 -#define MCDR1 0x0C -#define MCDR2 0x10 -#define MCSR 0x18 -#define MCCR1 0x00 +#include + struct mcp_sa11x0 { - u32 mccr0; - u32 mccr1; - unsigned char *mccr0_base; - unsigned char *mccr1_base; + u32 mccr0; + u32 mccr1; }; #define priv(mcp) ((struct mcp_sa11x0 *)mcp_priv(mcp)) @@ -47,25 +39,25 @@ struct mcp_sa11x0 { static void mcp_sa11x0_set_telecom_divisor(struct mcp *mcp, unsigned int divisor) { - struct mcp_sa11x0 *priv = priv(mcp); + unsigned int mccr0; divisor /= 32; - priv->mccr0 &= ~0x00007f00; - priv->mccr0 |= divisor << 8; - __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0); + mccr0 = Ser4MCCR0 & ~0x00007f00; + mccr0 |= divisor << 8; + Ser4MCCR0 = mccr0; } static void mcp_sa11x0_set_audio_divisor(struct mcp *mcp, unsigned int divisor) { - struct mcp_sa11x0 *priv = priv(mcp); + unsigned int mccr0; divisor /= 32; - priv->mccr0 &= ~0x0000007f; - priv->mccr0 |= divisor; - __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0); + mccr0 = Ser4MCCR0 & ~0x0000007f; + mccr0 |= divisor; + Ser4MCCR0 = mccr0; } /* @@ -79,16 +71,12 @@ mcp_sa11x0_write(struct mcp *mcp, unsigned int reg, unsigned int val) { int ret = -ETIME; int i; - u32 mcpreg; - struct mcp_sa11x0 *priv = priv(mcp); - mcpreg = reg << 17 | MCDR2_Wr | (val & 0xffff); - __raw_writel(mcpreg, priv->mccr0_base + MCDR2); + Ser4MCDR2 = reg << 17 | MCDR2_Wr | (val & 0xffff); for (i = 0; i < 2; i++) { udelay(mcp->rw_timeout); - mcpreg = __raw_readl(priv->mccr0_base + MCSR); - if (mcpreg & MCSR_CWC) { + if (Ser4MCSR & MCSR_CWC) { ret = 0; break; } @@ -109,18 +97,13 @@ mcp_sa11x0_read(struct mcp *mcp, unsigned int reg) { int ret = -ETIME; int i; - u32 mcpreg; - struct mcp_sa11x0 *priv = priv(mcp); - mcpreg = reg << 17 | MCDR2_Rd; - __raw_writel(mcpreg, priv->mccr0_base + MCDR2); + Ser4MCDR2 = reg << 17 | MCDR2_Rd; for (i = 0; i < 2; i++) { udelay(mcp->rw_timeout); - mcpreg = __raw_readl(priv->mccr0_base + MCSR); - if (mcpreg & MCSR_CRC) { - ret = __raw_readl(priv->mccr0_base + MCDR2) - & 0xffff; + if (Ser4MCSR & MCSR_CRC) { + ret = Ser4MCDR2 & 0xffff; break; } } @@ -133,19 +116,13 @@ mcp_sa11x0_read(struct mcp *mcp, unsigned int reg) static void mcp_sa11x0_enable(struct mcp *mcp) { - struct mcp_sa11x0 *priv = priv(mcp); - - __raw_writel(-1, priv->mccr0_base + MCSR); - priv->mccr0 |= MCCR0_MCE; - __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0); + Ser4MCSR = -1; + Ser4MCCR0 |= MCCR0_MCE; } static void mcp_sa11x0_disable(struct mcp *mcp) { - struct mcp_sa11x0 *priv = priv(mcp); - - priv->mccr0 &= ~MCCR0_MCE; - __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0); + Ser4MCCR0 &= ~MCCR0_MCE; } /* @@ -165,9 +142,6 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) struct mcp_plat_data *data = pdev->dev.platform_data; struct mcp *mcp; int ret; - struct mcp_sa11x0 *priv; - struct resource *res_mem0, *res_mem1; - u32 size0, size1; if (!data) return -ENODEV; @@ -175,59 +149,46 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) if (!data->codec) return -ENODEV; - res_mem0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res_mem0) - return -ENODEV; - size0 = res_mem0->end - res_mem0->start + 1; - - res_mem1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res_mem1) - return -ENODEV; - size1 = res_mem1->end - res_mem1->start + 1; - - if (!request_mem_region(res_mem0->start, size0, "sa11x0-mcp")) + if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp")) return -EBUSY; - if (!request_mem_region(res_mem1->start, size1, "sa11x0-mcp")) { - ret = -EBUSY; - goto release; - } - mcp = mcp_host_alloc(&pdev->dev, sizeof(struct mcp_sa11x0)); if (!mcp) { ret = -ENOMEM; - goto release2; + goto release; } - priv = priv(mcp); - mcp->owner = THIS_MODULE; mcp->ops = &mcp_sa11x0; mcp->sclk_rate = data->sclk_rate; - mcp->dma_audio_rd = DDAR_DevAdd(res_mem0->start + MCDR0) - + DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev; - mcp->dma_audio_wr = DDAR_DevAdd(res_mem0->start + MCDR0) - + DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev; - mcp->dma_telco_rd = DDAR_DevAdd(res_mem0->start + MCDR1) - + DDAR_DevRd + DDAR_Brst4 + DDAR_8BitDev; - mcp->dma_telco_wr = DDAR_DevAdd(res_mem0->start + MCDR1) - + DDAR_DevWr + DDAR_Brst4 + DDAR_8BitDev; + mcp->dma_audio_rd = DMA_Ser4MCP0Rd; + mcp->dma_audio_wr = DMA_Ser4MCP0Wr; + mcp->dma_telco_rd = DMA_Ser4MCP1Rd; + mcp->dma_telco_wr = DMA_Ser4MCP1Wr; mcp->codec = data->codec; platform_set_drvdata(pdev, mcp); + if (machine_is_assabet()) { + ASSABET_BCR_set(ASSABET_BCR_CODEC_RST); + } + + /* + * Setup the PPC unit correctly. + */ + PPDR &= ~PPC_RXD4; + PPDR |= PPC_TXD4 | PPC_SCLK | PPC_SFRM; + PSDR |= PPC_RXD4; + PSDR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + PPSR &= ~(PPC_TXD4 | PPC_SCLK | PPC_SFRM); + /* * Initialise device. Note that we initially * set the sampling rate to minimum. */ - priv->mccr0_base = ioremap(res_mem0->start, size0); - priv->mccr1_base = ioremap(res_mem1->start, size1); - - __raw_writel(-1, priv->mccr0_base + MCSR); - priv->mccr1 = data->mccr1; - priv->mccr0 = data->mccr0 | 0x7f7f; - __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0); - __raw_writel(priv->mccr1, priv->mccr1_base + MCCR1); + Ser4MCSR = -1; + Ser4MCCR1 = data->mccr1; + Ser4MCCR0 = data->mccr0 | 0x7f7f; /* * Calculate the read/write timeout (us) from the bit clock @@ -241,49 +202,32 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) if (ret == 0) goto out; - release2: - release_mem_region(res_mem1->start, size1); release: - release_mem_region(res_mem0->start, size0); + release_mem_region(0x80060000, 0x60); platform_set_drvdata(pdev, NULL); out: return ret; } -static int mcp_sa11x0_remove(struct platform_device *pdev) +static int mcp_sa11x0_remove(struct platform_device *dev) { - struct mcp *mcp = platform_get_drvdata(pdev); - struct mcp_sa11x0 *priv = priv(mcp); - struct resource *res_mem; - u32 size; + struct mcp *mcp = platform_get_drvdata(dev); - platform_set_drvdata(pdev, NULL); + platform_set_drvdata(dev, NULL); mcp_host_unregister(mcp); + release_mem_region(0x80060000, 0x60); - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res_mem) { - size = res_mem->end - res_mem->start + 1; - release_mem_region(res_mem->start, size); - } - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (res_mem) { - size = res_mem->end - res_mem->start + 1; - release_mem_region(res_mem->start, size); - } - iounmap(priv->mccr0_base); - iounmap(priv->mccr1_base); return 0; } static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state) { struct mcp *mcp = platform_get_drvdata(dev); - struct mcp_sa11x0 *priv = priv(mcp); - u32 mccr0; - mccr0 = priv->mccr0 & ~MCCR0_MCE; - __raw_writel(mccr0, priv->mccr0_base + MCCR0); + priv(mcp)->mccr0 = Ser4MCCR0; + priv(mcp)->mccr1 = Ser4MCCR1; + Ser4MCCR0 &= ~MCCR0_MCE; return 0; } @@ -291,10 +235,9 @@ static int mcp_sa11x0_suspend(struct platform_device *dev, pm_message_t state) static int mcp_sa11x0_resume(struct platform_device *dev) { struct mcp *mcp = platform_get_drvdata(dev); - struct mcp_sa11x0 *priv = priv(mcp); - __raw_writel(priv->mccr0, priv->mccr0_base + MCCR0); - __raw_writel(priv->mccr1, priv->mccr1_base + MCCR1); + Ser4MCCR1 = priv(mcp)->mccr1; + Ser4MCCR0 = priv(mcp)->mccr0; return 0; } @@ -311,7 +254,6 @@ static struct platform_driver mcp_sa11x0_driver = { .resume = mcp_sa11x0_resume, .driver = { .name = "sa11x0-mcp", - .owner = THIS_MODULE, }, }; -- GitLab From 65f2e753f1eb09d3a7e2a0d16408a5433b4097b2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 20 Jan 2012 17:38:58 +0000 Subject: [PATCH 0098/1359] Revert "ARM: sa11x0: Implement autoloading of codec and codec pdata for mcp bus." This reverts commit 5dd7bf59e0e8563265b3e5b33276099ef628fcc7. Conflicts: scripts/mod/file2alias.c This change is wrong on many levels. First and foremost, it causes a regression. On boot on Assabet, which this patch gives a codec id of 'ucb1x00', it gives: ucb1x00 ID not found: 1005 0x1005 is a valid ID for the UCB1300 device. Secondly, this patch is way over the top in terms of complexity. The only device which has been seen to be connected with this MCP code is the UCB1x00 (UCB1200, UCB1300 etc) devices, and they all use the same driver. Adding a match table, requiring the codec string to match the hardware ID read out of the ID register, etc is completely over the top when we can just read the hardware ID register. --- arch/arm/mach-sa1100/assabet.c | 1 - arch/arm/mach-sa1100/cerf.c | 1 - arch/arm/mach-sa1100/collie.c | 8 +---- arch/arm/mach-sa1100/include/mach/mcp.h | 2 -- arch/arm/mach-sa1100/lart.c | 1 - arch/arm/mach-sa1100/shannon.c | 1 - arch/arm/mach-sa1100/simpad.c | 8 +---- drivers/mfd/mcp-core.c | 44 ++--------------------- drivers/mfd/mcp-sa11x0.c | 7 ++-- drivers/mfd/ucb1x00-core.c | 48 ++++++------------------- drivers/mfd/ucb1x00-ts.c | 2 +- include/linux/mfd/mcp.h | 7 ++-- include/linux/mfd/ucb1x00.h | 5 +-- include/linux/mod_devicetable.h | 11 ------ scripts/mod/file2alias.c | 10 ------ 15 files changed, 21 insertions(+), 135 deletions(-) diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index d8aa1c28353b..0c4b76ab4d8e 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -202,7 +202,6 @@ static struct irda_platform_data assabet_irda_data = { static struct mcp_plat_data assabet_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1x00", }; static void __init assabet_init(void) diff --git a/arch/arm/mach-sa1100/cerf.c b/arch/arm/mach-sa1100/cerf.c index fcadc4cafe9a..11bb6d0b9be3 100644 --- a/arch/arm/mach-sa1100/cerf.c +++ b/arch/arm/mach-sa1100/cerf.c @@ -124,7 +124,6 @@ static void __init cerf_map_io(void) static struct mcp_plat_data cerf_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1x00", }; static void __init cerf_init(void) diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 6b7c74b304cf..b9060e236def 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -27,7 +27,6 @@ #include #include #include -#include #include #include @@ -86,15 +85,10 @@ static struct scoop_pcmcia_config collie_pcmcia_config = { .num_devs = 1, }; -static struct ucb1x00_plat_data collie_ucb1x00_data = { - .gpio_base = COLLIE_TC35143_GPIO_BASE, -}; - static struct mcp_plat_data collie_mcp_data = { .mccr0 = MCCR0_ADM | MCCR0_ExtClk, .sclk_rate = 9216000, - .codec = "ucb1x00", - .codec_pdata = &collie_ucb1x00_data, + .gpio_base = COLLIE_TC35143_GPIO_BASE, }; /* diff --git a/arch/arm/mach-sa1100/include/mach/mcp.h b/arch/arm/mach-sa1100/include/mach/mcp.h index 586cec898b35..ed1a331508a7 100644 --- a/arch/arm/mach-sa1100/include/mach/mcp.h +++ b/arch/arm/mach-sa1100/include/mach/mcp.h @@ -17,8 +17,6 @@ struct mcp_plat_data { u32 mccr1; unsigned int sclk_rate; int gpio_base; - const char *codec; - void *codec_pdata; }; #endif diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c index 48a8f4ef0fcd..af4e2761f3db 100644 --- a/arch/arm/mach-sa1100/lart.c +++ b/arch/arm/mach-sa1100/lart.c @@ -24,7 +24,6 @@ static struct mcp_plat_data lart_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1x00", }; static void __init lart_init(void) diff --git a/arch/arm/mach-sa1100/shannon.c b/arch/arm/mach-sa1100/shannon.c index 3807c9135272..318b2b766a0b 100644 --- a/arch/arm/mach-sa1100/shannon.c +++ b/arch/arm/mach-sa1100/shannon.c @@ -55,7 +55,6 @@ static struct resource shannon_flash_resource = { static struct mcp_plat_data shannon_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1x00", }; static void __init shannon_init(void) diff --git a/arch/arm/mach-sa1100/simpad.c b/arch/arm/mach-sa1100/simpad.c index d9b765c441f6..e17c04d6e324 100644 --- a/arch/arm/mach-sa1100/simpad.c +++ b/arch/arm/mach-sa1100/simpad.c @@ -14,7 +14,6 @@ #include #include #include -#include #include #include @@ -188,15 +187,10 @@ static struct resource simpad_flash_resources [] = { } }; -static struct ucb1x00_plat_data simpad_ucb1x00_data = { - .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, -}; - static struct mcp_plat_data simpad_mcp_data = { .mccr0 = MCCR0_ADM, .sclk_rate = 11981000, - .codec = "ucb1300", - .codec_pdata = &simpad_ucb1x00_data, + .gpio_base = SIMPAD_UCB1X00_GPIO_BASE, }; diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index 63be60bc3455..84815f9ef636 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -26,35 +26,9 @@ #define to_mcp(d) container_of(d, struct mcp, attached_device) #define to_mcp_driver(d) container_of(d, struct mcp_driver, drv) -static const struct mcp_device_id *mcp_match_id(const struct mcp_device_id *id, - const char *codec) -{ - while (id->name[0]) { - if (strcmp(codec, id->name) == 0) - return id; - id++; - } - return NULL; -} - -const struct mcp_device_id *mcp_get_device_id(const struct mcp *mcp) -{ - const struct mcp_driver *driver = - to_mcp_driver(mcp->attached_device.driver); - - return mcp_match_id(driver->id_table, mcp->codec); -} -EXPORT_SYMBOL(mcp_get_device_id); - static int mcp_bus_match(struct device *dev, struct device_driver *drv) { - const struct mcp *mcp = to_mcp(dev); - const struct mcp_driver *driver = to_mcp_driver(drv); - - if (driver->id_table) - return !!mcp_match_id(driver->id_table, mcp->codec); - - return 0; + return 1; } static int mcp_bus_probe(struct device *dev) @@ -100,18 +74,9 @@ static int mcp_bus_resume(struct device *dev) return ret; } -static int mcp_bus_uevent(struct device *dev, struct kobj_uevent_env *env) -{ - struct mcp *mcp = to_mcp(dev); - - add_uevent_var(env, "MODALIAS=%s%s", MCP_MODULE_PREFIX, mcp->codec); - return 0; -} - static struct bus_type mcp_bus_type = { .name = "mcp", .match = mcp_bus_match, - .uevent = mcp_bus_uevent, .probe = mcp_bus_probe, .remove = mcp_bus_remove, .suspend = mcp_bus_suspend, @@ -247,14 +212,9 @@ struct mcp *mcp_host_alloc(struct device *parent, size_t size) } EXPORT_SYMBOL(mcp_host_alloc); -int mcp_host_register(struct mcp *mcp, void *pdata) +int mcp_host_register(struct mcp *mcp) { - if (!mcp->codec) - return -EINVAL; - - mcp->attached_device.platform_data = pdata; dev_set_name(&mcp->attached_device, "mcp0"); - request_module("%s%s", MCP_MODULE_PREFIX, mcp->codec); return device_register(&mcp->attached_device); } EXPORT_SYMBOL(mcp_host_register); diff --git a/drivers/mfd/mcp-sa11x0.c b/drivers/mfd/mcp-sa11x0.c index da4e077a1bee..02c53a0766c4 100644 --- a/drivers/mfd/mcp-sa11x0.c +++ b/drivers/mfd/mcp-sa11x0.c @@ -146,9 +146,6 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) if (!data) return -ENODEV; - if (!data->codec) - return -ENODEV; - if (!request_mem_region(0x80060000, 0x60, "sa11x0-mcp")) return -EBUSY; @@ -165,7 +162,7 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) mcp->dma_audio_wr = DMA_Ser4MCP0Wr; mcp->dma_telco_rd = DMA_Ser4MCP1Rd; mcp->dma_telco_wr = DMA_Ser4MCP1Wr; - mcp->codec = data->codec; + mcp->gpio_base = data->gpio_base; platform_set_drvdata(pdev, mcp); @@ -198,7 +195,7 @@ static int mcp_sa11x0_probe(struct platform_device *pdev) mcp->rw_timeout = (64 * 3 * 1000000 + mcp->sclk_rate - 1) / mcp->sclk_rate; - ret = mcp_host_register(mcp, data->codec_pdata); + ret = mcp_host_register(mcp); if (ret == 0) goto out; diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index 91c4f25e0e55..b281217334eb 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -36,15 +36,6 @@ static DEFINE_MUTEX(ucb1x00_mutex); static LIST_HEAD(ucb1x00_drivers); static LIST_HEAD(ucb1x00_devices); -static struct mcp_device_id ucb1x00_id[] = { - { "ucb1x00", 0 }, /* auto-detection */ - { "ucb1200", UCB_ID_1200 }, - { "ucb1300", UCB_ID_1300 }, - { "tc35143", UCB_ID_TC35143 }, - { } -}; -MODULE_DEVICE_TABLE(mcp, ucb1x00_id); - /** * ucb1x00_io_set_dir - set IO direction * @ucb: UCB1x00 structure describing chip @@ -536,33 +527,17 @@ static struct class ucb1x00_class = { static int ucb1x00_probe(struct mcp *mcp) { - const struct mcp_device_id *mid; struct ucb1x00 *ucb; struct ucb1x00_driver *drv; - struct ucb1x00_plat_data *pdata; unsigned int id; int ret = -ENODEV; int temp; mcp_enable(mcp); id = mcp_reg_read(mcp, UCB_ID); - mid = mcp_get_device_id(mcp); - if (mid && mid->driver_data) { - if (id != mid->driver_data) { - printk(KERN_WARNING "%s wrong ID %04x found: %04x\n", - mid->name, (unsigned int) mid->driver_data, id); - goto err_disable; - } - } else { - mid = &ucb1x00_id[1]; - while (mid->driver_data) { - if (id == mid->driver_data) - break; - mid++; - } - printk(KERN_WARNING "%s ID not found: %04x\n", - ucb1x00_id[0].name, id); + if (id != UCB_ID_1200 && id != UCB_ID_1300 && id != UCB_ID_TC35143) { + printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id); goto err_disable; } @@ -571,28 +546,28 @@ static int ucb1x00_probe(struct mcp *mcp) if (!ucb) goto err_disable; - pdata = mcp->attached_device.platform_data; + ucb->dev.class = &ucb1x00_class; ucb->dev.parent = &mcp->attached_device; - dev_set_name(&ucb->dev, mid->name); + dev_set_name(&ucb->dev, "ucb1x00"); spin_lock_init(&ucb->lock); spin_lock_init(&ucb->io_lock); sema_init(&ucb->adc_sem, 1); - ucb->id = mid; + ucb->id = id; ucb->mcp = mcp; ucb->irq = ucb1x00_detect_irq(ucb); if (ucb->irq == NO_IRQ) { - printk(KERN_ERR "%s: IRQ probe failed\n", mid->name); + printk(KERN_ERR "UCB1x00: IRQ probe failed\n"); ret = -ENODEV; goto err_free; } ucb->gpio.base = -1; - if (pdata && (pdata->gpio_base >= 0)) { + if (mcp->gpio_base != 0) { ucb->gpio.label = dev_name(&ucb->dev); - ucb->gpio.base = pdata->gpio_base; + ucb->gpio.base = mcp->gpio_base; ucb->gpio.ngpio = 10; ucb->gpio.set = ucb1x00_gpio_set; ucb->gpio.get = ucb1x00_gpio_get; @@ -605,10 +580,10 @@ static int ucb1x00_probe(struct mcp *mcp) dev_info(&ucb->dev, "gpio_base not set so no gpiolib support"); ret = request_irq(ucb->irq, ucb1x00_irq, IRQF_TRIGGER_RISING, - mid->name, ucb); + "UCB1x00", ucb); if (ret) { - printk(KERN_ERR "%s: unable to grab irq%d: %d\n", - mid->name, ucb->irq, ret); + printk(KERN_ERR "ucb1x00: unable to grab irq%d: %d\n", + ucb->irq, ret); goto err_gpio; } @@ -730,7 +705,6 @@ static struct mcp_driver ucb1x00_driver = { .remove = ucb1x00_remove, .suspend = ucb1x00_suspend, .resume = ucb1x00_resume, - .id_table = ucb1x00_id, }; static int __init ucb1x00_init(void) diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index 40ec3c118868..38ffbd50a0d2 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -382,7 +382,7 @@ static int ucb1x00_ts_add(struct ucb1x00_dev *dev) ts->adcsync = adcsync ? UCB_SYNC : UCB_NOSYNC; idev->name = "Touchscreen panel"; - idev->id.product = ts->ucb->id->driver_data; + idev->id.product = ts->ucb->id; idev->open = ucb1x00_ts_open; idev->close = ucb1x00_ts_close; diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h index 1515e64e3663..ee496708e38b 100644 --- a/include/linux/mfd/mcp.h +++ b/include/linux/mfd/mcp.h @@ -10,7 +10,6 @@ #ifndef MCP_H #define MCP_H -#include #include struct mcp_ops; @@ -27,7 +26,7 @@ struct mcp { dma_device_t dma_telco_rd; dma_device_t dma_telco_wr; struct device attached_device; - const char *codec; + int gpio_base; }; struct mcp_ops { @@ -45,11 +44,10 @@ void mcp_reg_write(struct mcp *, unsigned int, unsigned int); unsigned int mcp_reg_read(struct mcp *, unsigned int); void mcp_enable(struct mcp *); void mcp_disable(struct mcp *); -const struct mcp_device_id *mcp_get_device_id(const struct mcp *mcp); #define mcp_get_sclk_rate(mcp) ((mcp)->sclk_rate) struct mcp *mcp_host_alloc(struct device *, size_t); -int mcp_host_register(struct mcp *, void *); +int mcp_host_register(struct mcp *); void mcp_host_unregister(struct mcp *); struct mcp_driver { @@ -58,7 +56,6 @@ struct mcp_driver { void (*remove)(struct mcp *); int (*suspend)(struct mcp *, pm_message_t); int (*resume)(struct mcp *); - const struct mcp_device_id *id_table; }; int mcp_driver_register(struct mcp_driver *); diff --git a/include/linux/mfd/ucb1x00.h b/include/linux/mfd/ucb1x00.h index bc19e5fb7ea8..4321f044d1e4 100644 --- a/include/linux/mfd/ucb1x00.h +++ b/include/linux/mfd/ucb1x00.h @@ -104,9 +104,6 @@ #define UCB_MODE_DYN_VFLAG_ENA (1 << 12) #define UCB_MODE_AUD_OFF_CAN (1 << 13) -struct ucb1x00_plat_data { - int gpio_base; -}; struct ucb1x00_irq { void *devid; @@ -119,7 +116,7 @@ struct ucb1x00 { unsigned int irq; struct semaphore adc_sem; spinlock_t io_lock; - const struct mcp_device_id *id; + u16 id; u16 io_dir; u16 io_out; u16 adc_cr; diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index b29e7f6f8fa5..83ac0713ed0a 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -436,17 +436,6 @@ struct spi_device_id { __attribute__((aligned(sizeof(kernel_ulong_t)))); }; -/* mcp */ - -#define MCP_NAME_SIZE 20 -#define MCP_MODULE_PREFIX "mcp:" - -struct mcp_device_id { - char name[MCP_NAME_SIZE]; - kernel_ulong_t driver_data /* Data private to the driver */ - __attribute__((aligned(sizeof(kernel_ulong_t)))); -}; - /* dmi */ enum dmi_field { DMI_NONE, diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index c0e14b3f2306..e8c969577768 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -823,16 +823,6 @@ static int do_spi_entry(const char *filename, struct spi_device_id *id, } ADD_TO_DEVTABLE("spi", struct spi_device_id, do_spi_entry); -/* Looks like: mcp:S */ -static int do_mcp_entry(const char *filename, struct mcp_device_id *id, - char *alias) -{ - sprintf(alias, MCP_MODULE_PREFIX "%s", id->name); - - return 1; -} -ADD_TO_DEVTABLE("mcp", struct mcp_device_id, do_mcp_entry); - static const struct dmifield { const char *prefix; int field; -- GitLab From 98250221691f728b7cad6deed98866f8847e683f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 14 Jan 2012 08:49:46 +0000 Subject: [PATCH 0099/1359] MFD: mcp-core: fix complaints from the genirq layer The genirq layer complains if an interrupt handler returns with interrupts enabled. The UCB1x00 handler does just this, because ucb1x00_enable() calls mcp_enable(), which uses spin_lock_irq() rather than spin_lock_irqsave(). Convert this, and the divisor setting functions to use spin_lock_irqsave(). Signed-off-by: Russell King --- drivers/mfd/mcp-core.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-) diff --git a/drivers/mfd/mcp-core.c b/drivers/mfd/mcp-core.c index 84815f9ef636..86cc3f7841cd 100644 --- a/drivers/mfd/mcp-core.c +++ b/drivers/mfd/mcp-core.c @@ -93,9 +93,11 @@ static struct bus_type mcp_bus_type = { */ void mcp_set_telecom_divisor(struct mcp *mcp, unsigned int div) { - spin_lock_irq(&mcp->lock); + unsigned long flags; + + spin_lock_irqsave(&mcp->lock, flags); mcp->ops->set_telecom_divisor(mcp, div); - spin_unlock_irq(&mcp->lock); + spin_unlock_irqrestore(&mcp->lock, flags); } EXPORT_SYMBOL(mcp_set_telecom_divisor); @@ -108,9 +110,11 @@ EXPORT_SYMBOL(mcp_set_telecom_divisor); */ void mcp_set_audio_divisor(struct mcp *mcp, unsigned int div) { - spin_lock_irq(&mcp->lock); + unsigned long flags; + + spin_lock_irqsave(&mcp->lock, flags); mcp->ops->set_audio_divisor(mcp, div); - spin_unlock_irq(&mcp->lock); + spin_unlock_irqrestore(&mcp->lock, flags); } EXPORT_SYMBOL(mcp_set_audio_divisor); @@ -163,10 +167,11 @@ EXPORT_SYMBOL(mcp_reg_read); */ void mcp_enable(struct mcp *mcp) { - spin_lock_irq(&mcp->lock); + unsigned long flags; + spin_lock_irqsave(&mcp->lock, flags); if (mcp->use_count++ == 0) mcp->ops->enable(mcp); - spin_unlock_irq(&mcp->lock); + spin_unlock_irqrestore(&mcp->lock, flags); } EXPORT_SYMBOL(mcp_enable); -- GitLab From 8f0fc977f58c36e75e205486c1aebb9b8e4263e1 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Thu, 19 Jan 2012 21:13:47 -0800 Subject: [PATCH 0100/1359] Revert "drm/i915: Work around gen7 BLT ring synchronization issues." This reverts commit 42ff6572e5a4a7414330a4ca91f0335da67deca9. New forcewake voodoo makes this no longer necessary. Acked-by: Daniel Vetter Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/intel_ringbuffer.c | 14 -------------- 1 file changed, 14 deletions(-) diff --git a/drivers/gpu/drm/i915/intel_ringbuffer.c b/drivers/gpu/drm/i915/intel_ringbuffer.c index fa5702c5da42..1ab842c6032e 100644 --- a/drivers/gpu/drm/i915/intel_ringbuffer.c +++ b/drivers/gpu/drm/i915/intel_ringbuffer.c @@ -804,17 +804,6 @@ ring_add_request(struct intel_ring_buffer *ring, return 0; } -static bool -gen7_blt_ring_get_irq(struct intel_ring_buffer *ring) -{ - /* The BLT ring on IVB appears to have broken synchronization - * between the seqno write and the interrupt, so that the - * interrupt appears first. Returning false here makes - * i915_wait_request() do a polling loop, instead. - */ - return false; -} - static bool gen6_ring_get_irq(struct intel_ring_buffer *ring, u32 gflag, u32 rflag) { @@ -1600,8 +1589,5 @@ int intel_init_blt_ring_buffer(struct drm_device *dev) *ring = gen6_blt_ring; - if (IS_GEN7(dev)) - ring->irq_get = gen7_blt_ring_get_irq; - return intel_init_ring_buffer(dev, ring); } -- GitLab From fd45c15f13e754f3c106427e857310f3e0813951 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Fri, 20 Jan 2012 10:12:45 +0900 Subject: [PATCH 0101/1359] perf: Don't call release_callchain_buffers() if allocation fails When alloc_callchain_buffers() fails, it frees all of entries before return. In addition, calling the release_callchain_buffers() will cause a NULL pointer dereference since callchain_cpu_entries is not set. Signed-off-by: Namhyung Kim Acked-by: Frederic Weisbecker Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Link: http://lkml.kernel.org/r/1327021966-27688-1-git-send-email-namhyung.kim@lge.com Signed-off-by: Ingo Molnar --- kernel/events/callchain.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/kernel/events/callchain.c b/kernel/events/callchain.c index 057e24b665cf..6581a040f399 100644 --- a/kernel/events/callchain.c +++ b/kernel/events/callchain.c @@ -115,8 +115,6 @@ int get_callchain_buffers(void) } err = alloc_callchain_buffers(); - if (err) - release_callchain_buffers(); exit: mutex_unlock(&callchain_mutex); -- GitLab From 46cd6a7f680d14f6f80ede9f04aeb70fa83bd266 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Fri, 20 Jan 2012 10:12:46 +0900 Subject: [PATCH 0102/1359] perf: Call perf_cgroup_event_time() directly The perf_event_time() will call perf_cgroup_event_time() if @event is a cgroup event. Just do it directly and avoid the extra check.. Signed-off-by: Namhyung Kim Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Paul Mackerras Cc: Arnaldo Carvalho de Melo Link: http://lkml.kernel.org/r/1327021966-27688-2-git-send-email-namhyung.kim@lge.com Signed-off-by: Ingo Molnar --- kernel/events/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/events/core.c b/kernel/events/core.c index a8f4ac001a00..32b48c889711 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -815,7 +815,7 @@ static void update_event_times(struct perf_event *event) * here. */ if (is_cgroup_event(event)) - run_end = perf_event_time(event); + run_end = perf_cgroup_event_time(event); else if (ctx->is_active) run_end = ctx->time; else -- GitLab From 2a7f51a3e08cdaeea78d9e101a0079422a55bbc3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Jan 2012 09:28:53 +0000 Subject: [PATCH 0103/1359] MFD: mcp-core: fix mcp_priv() to be more type safe mcp_priv() does unexpected things when passed a void pointer. Make it a typed inline function, which ensures that it works correctly in these cases. Signed-off-by: Russell King --- include/linux/mfd/mcp.h | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/include/linux/mfd/mcp.h b/include/linux/mfd/mcp.h index ee496708e38b..f88c1cc0cb0f 100644 --- a/include/linux/mfd/mcp.h +++ b/include/linux/mfd/mcp.h @@ -64,6 +64,9 @@ void mcp_driver_unregister(struct mcp_driver *); #define mcp_get_drvdata(mcp) dev_get_drvdata(&(mcp)->attached_device) #define mcp_set_drvdata(mcp,d) dev_set_drvdata(&(mcp)->attached_device, d) -#define mcp_priv(mcp) ((void *)((mcp)+1)) +static inline void *mcp_priv(struct mcp *mcp) +{ + return mcp + 1; +} #endif -- GitLab From 2e95e51e184bd107380881502ea0f483c4500706 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Jan 2012 18:15:24 +0000 Subject: [PATCH 0104/1359] MFD: ucb1x00-core: fix missing restore of io output data on resume We were not restoring the UCB1x00 gpio output data on resume, resulting in incorrect GPIO output data after a resume. Add the missing register write. Signed-off-by: Russell King --- drivers/mfd/ucb1x00-core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index b281217334eb..8ebda97981e1 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -687,6 +687,7 @@ static int ucb1x00_resume(struct mcp *mcp) struct ucb1x00 *ucb = mcp_get_drvdata(mcp); struct ucb1x00_dev *dev; + ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); mutex_lock(&ucb1x00_mutex); list_for_each_entry(dev, &ucb->devs, dev_node) { -- GitLab From c23bb602af24a635d0894aa7091e184385bf8a9f Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 21 Jan 2012 18:21:50 +0000 Subject: [PATCH 0105/1359] MFD: ucb1x00-core: fix gpiolib direction_output handling gpiolib drivers should first set the output data before setting the direction to avoid putting glitches on an output signal. As an additional bonus, we tweak the code to avoid unnecessary register writes to the output and direction registers if they have no need to be updated. Signed-off-by: Russell King --- drivers/mfd/ucb1x00-core.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-) diff --git a/drivers/mfd/ucb1x00-core.c b/drivers/mfd/ucb1x00-core.c index 8ebda97981e1..febc90cdef7e 100644 --- a/drivers/mfd/ucb1x00-core.c +++ b/drivers/mfd/ucb1x00-core.c @@ -148,16 +148,22 @@ static int ucb1x00_gpio_direction_output(struct gpio_chip *chip, unsigned offset { struct ucb1x00 *ucb = container_of(chip, struct ucb1x00, gpio); unsigned long flags; + unsigned old, mask = 1 << offset; spin_lock_irqsave(&ucb->io_lock, flags); - ucb->io_dir |= (1 << offset); - ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); - + old = ucb->io_out; if (value) - ucb->io_out |= 1 << offset; + ucb->io_out |= mask; else - ucb->io_out &= ~(1 << offset); - ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); + ucb->io_out &= ~mask; + + if (old != ucb->io_out) + ucb1x00_reg_write(ucb, UCB_IO_DATA, ucb->io_out); + + if (!(ucb->io_dir & mask)) { + ucb->io_dir |= mask; + ucb1x00_reg_write(ucb, UCB_IO_DIR, ucb->io_dir); + } spin_unlock_irqrestore(&ucb->io_lock, flags); return 0; -- GitLab From aa557875cc6ed78a8c6035dffa354a09d48b16f6 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Wed, 13 Jul 2011 22:33:13 +0200 Subject: [PATCH 0106/1359] m68k/irq: Remove obsolete IRQ_FLG_* definitions The m68k core irq code stopped honoring these flags during the irq restructuring in 2006. Signed-off-by: Geert Uytterhoeven --- arch/m68k/include/asm/irq.h | 13 ------------- 1 file changed, 13 deletions(-) diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h index 6198df5ff245..d3a8acd4f1fe 100644 --- a/arch/m68k/include/asm/irq.h +++ b/arch/m68k/include/asm/irq.h @@ -49,19 +49,6 @@ #define IRQ_USER 8 -/* - * various flags for request_irq() - the Amiga now uses the standard - * mechanism like all other architectures - IRQF_DISABLED and - * IRQF_SHARED are your friends. - */ -#ifndef MACH_AMIGA_ONLY -#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */ -#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */ -#define IRQ_FLG_FAST (0x0004) -#define IRQ_FLG_SLOW (0x0008) -#define IRQ_FLG_STD (0x8000) /* internally used */ -#endif - struct irq_data; struct irq_chip; struct irq_desc; -- GitLab From d9070fc4997e255532f0519709c9326d043501b2 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Mon, 24 Oct 2011 01:11:10 +1100 Subject: [PATCH 0107/1359] macfb: fix black and white modes macfb won't init in black & white modes since fb_alloc_cmap() no longer works for zero cmap length. Fix this and also clean up a few printk's and some stylistic inconsistencies. Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven --- drivers/video/macfb.c | 60 ++++++++++++++++++++----------------------- 1 file changed, 28 insertions(+), 32 deletions(-) diff --git a/drivers/video/macfb.c b/drivers/video/macfb.c index 43207cc6cc19..fe01add3700e 100644 --- a/drivers/video/macfb.c +++ b/drivers/video/macfb.c @@ -592,12 +592,12 @@ static int __init macfb_init(void) if (!fb_info.screen_base) return -ENODEV; - printk("macfb: framebuffer at 0x%08lx, mapped to 0x%p, size %dk\n", - macfb_fix.smem_start, fb_info.screen_base, - macfb_fix.smem_len / 1024); - printk("macfb: mode is %dx%dx%d, linelength=%d\n", - macfb_defined.xres, macfb_defined.yres, - macfb_defined.bits_per_pixel, macfb_fix.line_length); + pr_info("macfb: framebuffer at 0x%08lx, mapped to 0x%p, size %dk\n", + macfb_fix.smem_start, fb_info.screen_base, + macfb_fix.smem_len / 1024); + pr_info("macfb: mode is %dx%dx%d, linelength=%d\n", + macfb_defined.xres, macfb_defined.yres, + macfb_defined.bits_per_pixel, macfb_fix.line_length); /* Fill in the available video resolution */ macfb_defined.xres_virtual = macfb_defined.xres; @@ -613,14 +613,10 @@ static int __init macfb_init(void) switch (macfb_defined.bits_per_pixel) { case 1: - /* - * XXX: I think this will catch any program that tries - * to do FBIO_PUTCMAP when the visual is monochrome. - */ macfb_defined.red.length = macfb_defined.bits_per_pixel; macfb_defined.green.length = macfb_defined.bits_per_pixel; macfb_defined.blue.length = macfb_defined.bits_per_pixel; - video_cmap_len = 0; + video_cmap_len = 2; macfb_fix.visual = FB_VISUAL_MONO01; break; case 2: @@ -660,11 +656,10 @@ static int __init macfb_init(void) macfb_fix.visual = FB_VISUAL_TRUECOLOR; break; default: - video_cmap_len = 0; - macfb_fix.visual = FB_VISUAL_MONO01; - printk("macfb: unknown or unsupported bit depth: %d\n", + pr_err("macfb: unknown or unsupported bit depth: %d\n", macfb_defined.bits_per_pixel); - break; + err = -EINVAL; + goto fail_unmap; } /* @@ -734,8 +729,8 @@ static int __init macfb_init(void) case MAC_MODEL_Q950: strcpy(macfb_fix.id, "DAFB"); macfb_setpalette = dafb_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; dafb_cmap_regs = ioremap(DAFB_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; break; /* @@ -744,8 +739,8 @@ static int __init macfb_init(void) case MAC_MODEL_LCII: strcpy(macfb_fix.id, "V8"); macfb_setpalette = v8_brazil_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; break; /* @@ -758,8 +753,8 @@ static int __init macfb_init(void) case MAC_MODEL_P600: strcpy(macfb_fix.id, "Brazil"); macfb_setpalette = v8_brazil_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; break; /* @@ -773,10 +768,10 @@ static int __init macfb_init(void) case MAC_MODEL_P520: case MAC_MODEL_P550: case MAC_MODEL_P460: - macfb_setpalette = v8_brazil_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; strcpy(macfb_fix.id, "Sonora"); + macfb_setpalette = v8_brazil_setpalette; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; break; /* @@ -786,10 +781,10 @@ static int __init macfb_init(void) */ case MAC_MODEL_IICI: case MAC_MODEL_IISI: - macfb_setpalette = rbv_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; strcpy(macfb_fix.id, "RBV"); + macfb_setpalette = rbv_setpalette; rbv_cmap_regs = ioremap(DAC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; break; /* @@ -797,10 +792,10 @@ static int __init macfb_init(void) */ case MAC_MODEL_Q840: case MAC_MODEL_C660: - macfb_setpalette = civic_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; strcpy(macfb_fix.id, "Civic"); + macfb_setpalette = civic_setpalette; civic_cmap_regs = ioremap(CIVIC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; break; @@ -809,26 +804,26 @@ static int __init macfb_init(void) * We think this may be like the LC II */ case MAC_MODEL_LC: + strcpy(macfb_fix.id, "LC"); if (vidtest) { macfb_setpalette = v8_brazil_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; } - strcpy(macfb_fix.id, "LC"); break; /* * We think this may be like the LC II */ case MAC_MODEL_CCL: + strcpy(macfb_fix.id, "Color Classic"); if (vidtest) { macfb_setpalette = v8_brazil_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; v8_brazil_cmap_regs = ioremap(DAC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; } - strcpy(macfb_fix.id, "Color Classic"); break; /* @@ -893,10 +888,10 @@ static int __init macfb_init(void) case MAC_MODEL_PB270C: case MAC_MODEL_PB280: case MAC_MODEL_PB280C: - macfb_setpalette = csc_setpalette; - macfb_defined.activate = FB_ACTIVATE_NOW; strcpy(macfb_fix.id, "CSC"); + macfb_setpalette = csc_setpalette; csc_cmap_regs = ioremap(CSC_BASE, 0x1000); + macfb_defined.activate = FB_ACTIVATE_NOW; break; default: @@ -918,8 +913,9 @@ static int __init macfb_init(void) if (err) goto fail_dealloc; - printk("fb%d: %s frame buffer device\n", - fb_info.node, fb_info.fix.id); + pr_info("fb%d: %s frame buffer device\n", + fb_info.node, fb_info.fix.id); + return 0; fail_dealloc: -- GitLab From 37be2c86f0fbd89b66792008767e688c819b7c32 Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Mon, 24 Oct 2011 01:11:23 +1100 Subject: [PATCH 0108/1359] mac_scsi: dont enable mac_scsi irq before requesting it Don't enable the SCSI irq when initialising the chip -- the irq has no handler yet. Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven --- drivers/scsi/mac_scsi.c | 6 ------ 1 file changed, 6 deletions(-) diff --git a/drivers/scsi/mac_scsi.c b/drivers/scsi/mac_scsi.c index af3a6af97cc7..737d526c0813 100644 --- a/drivers/scsi/mac_scsi.c +++ b/drivers/scsi/mac_scsi.c @@ -340,9 +340,6 @@ static void mac_scsi_reset_boot(struct Scsi_Host *instance) printk(KERN_INFO "Macintosh SCSI: resetting the SCSI bus..." ); - /* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */ - disable_irq(IRQ_MAC_SCSI); - /* get in phase */ NCR5380_write( TARGET_COMMAND_REG, PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) )); @@ -358,9 +355,6 @@ static void mac_scsi_reset_boot(struct Scsi_Host *instance) for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); ) barrier(); - /* switch on SCSI IRQ again */ - enable_irq(IRQ_MAC_SCSI); - printk(KERN_INFO " done\n" ); } #endif -- GitLab From c808d3d839ab70c87a6c9356c50569c87661378e Mon Sep 17 00:00:00 2001 From: Finn Thain Date: Mon, 24 Oct 2011 01:11:24 +1100 Subject: [PATCH 0109/1359] mac_esp: rename irq Rename the "Mac ESP" irq as "ESP" to be consistent with all the other Mac drivers and ESP drivers. Signed-off-by: Finn Thain Signed-off-by: Geert Uytterhoeven --- drivers/scsi/mac_esp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/scsi/mac_esp.c b/drivers/scsi/mac_esp.c index 4ceeace80453..70eb1f79b1ba 100644 --- a/drivers/scsi/mac_esp.c +++ b/drivers/scsi/mac_esp.c @@ -565,8 +565,7 @@ static int __devinit esp_mac_probe(struct platform_device *dev) esp_chips[dev->id] = esp; mb(); if (esp_chips[!dev->id] == NULL) { - err = request_irq(host->irq, mac_scsi_esp_intr, 0, - "Mac ESP", NULL); + err = request_irq(host->irq, mac_scsi_esp_intr, 0, "ESP", NULL); if (err < 0) { esp_chips[dev->id] = NULL; goto fail_free_priv; -- GitLab From 2a3535069e33d8b416f406c159ce924427315303 Mon Sep 17 00:00:00 2001 From: Andreas Schwab Date: Mon, 9 Jan 2012 15:10:15 +0100 Subject: [PATCH 0110/1359] m68k: Fix assembler constraint to prevent overeager gcc optimisation Passing the address of a variable as an operand to an asm statement doesn't mark the value of this variable as used, so gcc may optimize its initialisation away. Fix this by using the "m" constraint instead. Signed-off-by: Andreas Schwab Signed-off-by: Geert Uytterhoeven Cc: stable@vger.kernel.org --- arch/m68k/atari/config.c | 8 ++++---- arch/m68k/kernel/process_mm.c | 4 ++-- arch/m68k/kernel/process_no.c | 4 ++-- arch/m68k/kernel/traps.c | 36 +++++++++++++++++------------------ arch/m68k/mm/cache.c | 6 +++--- 5 files changed, 28 insertions(+), 30 deletions(-) diff --git a/arch/m68k/atari/config.c b/arch/m68k/atari/config.c index 4203d101363c..c4ac15c4f065 100644 --- a/arch/m68k/atari/config.c +++ b/arch/m68k/atari/config.c @@ -414,9 +414,9 @@ void __init config_atari(void) * FDC val = 4 -> Supervisor only */ asm volatile ("\n" " .chip 68030\n" - " pmove %0@,%/tt1\n" + " pmove %0,%/tt1\n" " .chip 68k" - : : "a" (&tt1_val)); + : : "m" (tt1_val)); } else { asm volatile ("\n" " .chip 68040\n" @@ -569,10 +569,10 @@ static void atari_reset(void) : "d0"); } else asm volatile ("\n" - " pmove %0@,%%tc\n" + " pmove %0,%%tc\n" " jmp %1@" : /* no outputs */ - : "a" (&tc_val), "a" (reset_addr)); + : "m" (tc_val), "a" (reset_addr)); } diff --git a/arch/m68k/kernel/process_mm.c b/arch/m68k/kernel/process_mm.c index 1bc223aa07ec..aa4ffb882366 100644 --- a/arch/m68k/kernel/process_mm.c +++ b/arch/m68k/kernel/process_mm.c @@ -189,8 +189,8 @@ void flush_thread(void) current->thread.fs = __USER_DS; if (!FPU_IS_EMU) asm volatile (".chip 68k/68881\n\t" - "frestore %0@\n\t" - ".chip 68k" : : "a" (&zero)); + "frestore %0\n\t" + ".chip 68k" : : "m" (zero)); } /* diff --git a/arch/m68k/kernel/process_no.c b/arch/m68k/kernel/process_no.c index 69c1803fcf1b..5e1078cabe0e 100644 --- a/arch/m68k/kernel/process_no.c +++ b/arch/m68k/kernel/process_no.c @@ -163,8 +163,8 @@ void flush_thread(void) #ifdef CONFIG_FPU if (!FPU_IS_EMU) asm volatile (".chip 68k/68881\n\t" - "frestore %0@\n\t" - ".chip 68k" : : "a" (&zero)); + "frestore %0\n\t" + ".chip 68k" : : "m" (zero)); #endif } diff --git a/arch/m68k/kernel/traps.c b/arch/m68k/kernel/traps.c index 89362f2bb56a..eb6746978083 100644 --- a/arch/m68k/kernel/traps.c +++ b/arch/m68k/kernel/traps.c @@ -552,13 +552,13 @@ static inline void bus_error030 (struct frame *fp) #ifdef DEBUG asm volatile ("ptestr %3,%2@,#7,%0\n\t" - "pmove %%psr,%1@" - : "=a&" (desc) - : "a" (&temp), "a" (addr), "d" (ssw)); + "pmove %%psr,%1" + : "=a&" (desc), "=m" (temp) + : "a" (addr), "d" (ssw)); #else asm volatile ("ptestr %2,%1@,#7\n\t" - "pmove %%psr,%0@" - : : "a" (&temp), "a" (addr), "d" (ssw)); + "pmove %%psr,%0" + : "=m" (temp) : "a" (addr), "d" (ssw)); #endif mmusr = temp; @@ -605,20 +605,18 @@ static inline void bus_error030 (struct frame *fp) !(ssw & RW) ? "write" : "read", addr, fp->ptregs.pc, ssw); asm volatile ("ptestr #1,%1@,#0\n\t" - "pmove %%psr,%0@" - : /* no outputs */ - : "a" (&temp), "a" (addr)); + "pmove %%psr,%0" + : "=m" (temp) + : "a" (addr)); mmusr = temp; printk ("level 0 mmusr is %#x\n", mmusr); #if 0 - asm volatile ("pmove %%tt0,%0@" - : /* no outputs */ - : "a" (&tlong)); + asm volatile ("pmove %%tt0,%0" + : "=m" (tlong)); printk("tt0 is %#lx, ", tlong); - asm volatile ("pmove %%tt1,%0@" - : /* no outputs */ - : "a" (&tlong)); + asm volatile ("pmove %%tt1,%0" + : "=m" (tlong)); printk("tt1 is %#lx\n", tlong); #endif #ifdef DEBUG @@ -668,13 +666,13 @@ static inline void bus_error030 (struct frame *fp) #ifdef DEBUG asm volatile ("ptestr #1,%2@,#7,%0\n\t" - "pmove %%psr,%1@" - : "=a&" (desc) - : "a" (&temp), "a" (addr)); + "pmove %%psr,%1" + : "=a&" (desc), "=m" (temp) + : "a" (addr)); #else asm volatile ("ptestr #1,%1@,#7\n\t" - "pmove %%psr,%0@" - : : "a" (&temp), "a" (addr)); + "pmove %%psr,%0" + : "=m" (temp) : "a" (addr)); #endif mmusr = temp; diff --git a/arch/m68k/mm/cache.c b/arch/m68k/mm/cache.c index 5437fff5fe07..5550aa4fd811 100644 --- a/arch/m68k/mm/cache.c +++ b/arch/m68k/mm/cache.c @@ -52,9 +52,9 @@ static unsigned long virt_to_phys_slow(unsigned long vaddr) unsigned long *descaddr; asm volatile ("ptestr %3,%2@,#7,%0\n\t" - "pmove %%psr,%1@" - : "=a&" (descaddr) - : "a" (&mmusr), "a" (vaddr), "d" (get_fs().seg)); + "pmove %%psr,%1" + : "=a&" (descaddr), "=m" (mmusr) + : "a" (vaddr), "d" (get_fs().seg)); if (mmusr & (MMU_I|MMU_B|MMU_L)) return 0; descaddr = phys_to_virt((unsigned long)descaddr); -- GitLab From 95120d5d1bc17bdec29085186b6ab3d90e92d6f3 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Sun, 22 Jan 2012 18:57:57 +0100 Subject: [PATCH 0111/1359] Correct bad gpio naming One of the GPIO names in drivers/gpio/gpio-lpc32xx.c was bad. Renaming gpi000 -> gpio00 Signed-off-by: Roland Stigge Signed-off-by: Grant Likely --- drivers/gpio/gpio-lpc32xx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpio/gpio-lpc32xx.c b/drivers/gpio/gpio-lpc32xx.c index 5b6948081f8f..ddfacc5ce56d 100644 --- a/drivers/gpio/gpio-lpc32xx.c +++ b/drivers/gpio/gpio-lpc32xx.c @@ -96,7 +96,7 @@ static const char *gpio_p2_names[LPC32XX_GPIO_P2_MAX] = { }; static const char *gpio_p3_names[LPC32XX_GPIO_P3_MAX] = { - "gpi000", "gpio01", "gpio02", "gpio03", + "gpio00", "gpio01", "gpio02", "gpio03", "gpio04", "gpio05" }; -- GitLab From 0af5e4c36e70cfd4ae96d3704a425c414f530f2a Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 22 Jan 2012 20:58:55 +0000 Subject: [PATCH 0112/1359] MFD: ucb1x00-ts: fix resume failure If the ucb1x00 touchscreen is resumed while the touchscreen is being touched, the main thread stops responding. This occurs because two things happen: 1. When we suspended, we were woken up, and executed the loop. Finding that the touchscreen was not pressed, we prepare to schedule for a maximum timeout, before being stopped in try_to_freeze(). 2. an irq occurs, we disable the irq, and mark it as disabled, and wake the thread. This wake occurs while the thread is still within __refrigerator() 3. The thread is unfrozen, and __refrigerator() sets the threads state back to INTERRUPTIBLE. We then drop into schedule_timeout() with an infinite timeout and the IRQ disabled. This prevents any further screen touches activating the thread. Fix this by using kthread_freezable_should_stop() which handles the freezing issues for us outside of the hotspot where the task state matters. Include a flag to ignore the touchscreen until it is released to avoid sending unintended data to the application. Signed-off-by: Russell King --- drivers/mfd/ucb1x00-ts.c | 32 +++++--------------------------- 1 file changed, 5 insertions(+), 27 deletions(-) diff --git a/drivers/mfd/ucb1x00-ts.c b/drivers/mfd/ucb1x00-ts.c index 38ffbd50a0d2..63a3cbdfa3f3 100644 --- a/drivers/mfd/ucb1x00-ts.c +++ b/drivers/mfd/ucb1x00-ts.c @@ -47,7 +47,6 @@ struct ucb1x00_ts { u16 x_res; u16 y_res; - unsigned int restart:1; unsigned int adcsync:1; }; @@ -207,15 +206,17 @@ static int ucb1x00_thread(void *_ts) { struct ucb1x00_ts *ts = _ts; DECLARE_WAITQUEUE(wait, current); + bool frozen, ignore = false; int valid = 0; set_freezable(); add_wait_queue(&ts->irq_wait, &wait); - while (!kthread_should_stop()) { + while (!kthread_freezable_should_stop(&frozen)) { unsigned int x, y, p; signed long timeout; - ts->restart = 0; + if (frozen) + ignore = true; ucb1x00_adc_enable(ts->ucb); @@ -258,7 +259,7 @@ static int ucb1x00_thread(void *_ts) * space. We therefore leave it to user space * to do any filtering they please. */ - if (!ts->restart) { + if (!ignore) { ucb1x00_ts_evt_add(ts, p, x, y); valid = 1; } @@ -267,8 +268,6 @@ static int ucb1x00_thread(void *_ts) timeout = HZ / 100; } - try_to_freeze(); - schedule_timeout(timeout); } @@ -340,26 +339,6 @@ static void ucb1x00_ts_close(struct input_dev *idev) ucb1x00_disable(ts->ucb); } -#ifdef CONFIG_PM -static int ucb1x00_ts_resume(struct ucb1x00_dev *dev) -{ - struct ucb1x00_ts *ts = dev->priv; - - if (ts->rtask != NULL) { - /* - * Restart the TS thread to ensure the - * TS interrupt mode is set up again - * after sleep. - */ - ts->restart = 1; - wake_up(&ts->irq_wait); - } - return 0; -} -#else -#define ucb1x00_ts_resume NULL -#endif - /* * Initialisation. @@ -425,7 +404,6 @@ static void ucb1x00_ts_remove(struct ucb1x00_dev *dev) static struct ucb1x00_driver ucb1x00_ts_driver = { .add = ucb1x00_ts_add, .remove = ucb1x00_ts_remove, - .resume = ucb1x00_ts_resume, }; static int __init ucb1x00_ts_init(void) -- GitLab From e9c688a3272fd4b659228f3880de8109a94540e2 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Sun, 22 Jan 2012 14:31:15 -0700 Subject: [PATCH 0113/1359] driver core: remove drivers/base/sys.c and include/linux/sysdev.h Now that all users of 'struct sysdev' are removed from the kernel, we can safely remove the .h and .c files for this code, to ensure that no one accidentally starts to use it again. Many thanks for Kay who did all the hard work here on making this happen. Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/base/Makefile | 2 +- drivers/base/sys.c | 383 ----------------------------------------- include/linux/sysdev.h | 164 ------------------ 3 files changed, 1 insertion(+), 548 deletions(-) delete mode 100644 drivers/base/sys.c delete mode 100644 include/linux/sysdev.h diff --git a/drivers/base/Makefile b/drivers/base/Makefile index 2c8272dd93c4..610f9997a403 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -1,6 +1,6 @@ # Makefile for the Linux device tree -obj-y := core.o sys.o bus.o dd.o syscore.o \ +obj-y := core.o bus.o dd.o syscore.o \ driver.o class.o platform.o \ cpu.o firmware.o init.o map.o devres.o \ attribute_container.o transport_class.o \ diff --git a/drivers/base/sys.c b/drivers/base/sys.c deleted file mode 100644 index 409f5ce78829..000000000000 --- a/drivers/base/sys.c +++ /dev/null @@ -1,383 +0,0 @@ -/* - * sys.c - pseudo-bus for system 'devices' (cpus, PICs, timers, etc) - * - * Copyright (c) 2002-3 Patrick Mochel - * 2002-3 Open Source Development Lab - * - * This file is released under the GPLv2 - * - * This exports a 'system' bus type. - * By default, a 'sys' bus gets added to the root of the system. There will - * always be core system devices. Devices can use sysdev_register() to - * add themselves as children of the system bus. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "base.h" - -#define to_sysdev(k) container_of(k, struct sys_device, kobj) -#define to_sysdev_attr(a) container_of(a, struct sysdev_attribute, attr) - - -static ssize_t -sysdev_show(struct kobject *kobj, struct attribute *attr, char *buffer) -{ - struct sys_device *sysdev = to_sysdev(kobj); - struct sysdev_attribute *sysdev_attr = to_sysdev_attr(attr); - - if (sysdev_attr->show) - return sysdev_attr->show(sysdev, sysdev_attr, buffer); - return -EIO; -} - - -static ssize_t -sysdev_store(struct kobject *kobj, struct attribute *attr, - const char *buffer, size_t count) -{ - struct sys_device *sysdev = to_sysdev(kobj); - struct sysdev_attribute *sysdev_attr = to_sysdev_attr(attr); - - if (sysdev_attr->store) - return sysdev_attr->store(sysdev, sysdev_attr, buffer, count); - return -EIO; -} - -static const struct sysfs_ops sysfs_ops = { - .show = sysdev_show, - .store = sysdev_store, -}; - -static struct kobj_type ktype_sysdev = { - .sysfs_ops = &sysfs_ops, -}; - - -int sysdev_create_file(struct sys_device *s, struct sysdev_attribute *a) -{ - return sysfs_create_file(&s->kobj, &a->attr); -} - - -void sysdev_remove_file(struct sys_device *s, struct sysdev_attribute *a) -{ - sysfs_remove_file(&s->kobj, &a->attr); -} - -EXPORT_SYMBOL_GPL(sysdev_create_file); -EXPORT_SYMBOL_GPL(sysdev_remove_file); - -#define to_sysdev_class(k) container_of(k, struct sysdev_class, kset.kobj) -#define to_sysdev_class_attr(a) container_of(a, \ - struct sysdev_class_attribute, attr) - -static ssize_t sysdev_class_show(struct kobject *kobj, struct attribute *attr, - char *buffer) -{ - struct sysdev_class *class = to_sysdev_class(kobj); - struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr); - - if (class_attr->show) - return class_attr->show(class, class_attr, buffer); - return -EIO; -} - -static ssize_t sysdev_class_store(struct kobject *kobj, struct attribute *attr, - const char *buffer, size_t count) -{ - struct sysdev_class *class = to_sysdev_class(kobj); - struct sysdev_class_attribute *class_attr = to_sysdev_class_attr(attr); - - if (class_attr->store) - return class_attr->store(class, class_attr, buffer, count); - return -EIO; -} - -static const struct sysfs_ops sysfs_class_ops = { - .show = sysdev_class_show, - .store = sysdev_class_store, -}; - -static struct kobj_type ktype_sysdev_class = { - .sysfs_ops = &sysfs_class_ops, -}; - -int sysdev_class_create_file(struct sysdev_class *c, - struct sysdev_class_attribute *a) -{ - return sysfs_create_file(&c->kset.kobj, &a->attr); -} -EXPORT_SYMBOL_GPL(sysdev_class_create_file); - -void sysdev_class_remove_file(struct sysdev_class *c, - struct sysdev_class_attribute *a) -{ - sysfs_remove_file(&c->kset.kobj, &a->attr); -} -EXPORT_SYMBOL_GPL(sysdev_class_remove_file); - -extern struct kset *system_kset; - -int sysdev_class_register(struct sysdev_class *cls) -{ - int retval; - - pr_debug("Registering sysdev class '%s'\n", cls->name); - - INIT_LIST_HEAD(&cls->drivers); - memset(&cls->kset.kobj, 0x00, sizeof(struct kobject)); - cls->kset.kobj.parent = &system_kset->kobj; - cls->kset.kobj.ktype = &ktype_sysdev_class; - cls->kset.kobj.kset = system_kset; - - retval = kobject_set_name(&cls->kset.kobj, "%s", cls->name); - if (retval) - return retval; - - retval = kset_register(&cls->kset); - if (!retval && cls->attrs) - retval = sysfs_create_files(&cls->kset.kobj, - (const struct attribute **)cls->attrs); - return retval; -} - -void sysdev_class_unregister(struct sysdev_class *cls) -{ - pr_debug("Unregistering sysdev class '%s'\n", - kobject_name(&cls->kset.kobj)); - if (cls->attrs) - sysfs_remove_files(&cls->kset.kobj, - (const struct attribute **)cls->attrs); - kset_unregister(&cls->kset); -} - -EXPORT_SYMBOL_GPL(sysdev_class_register); -EXPORT_SYMBOL_GPL(sysdev_class_unregister); - -static DEFINE_MUTEX(sysdev_drivers_lock); - -/* - * @dev != NULL means that we're unwinding because some drv->add() - * failed for some reason. You need to grab sysdev_drivers_lock before - * calling this. - */ -static void __sysdev_driver_remove(struct sysdev_class *cls, - struct sysdev_driver *drv, - struct sys_device *from_dev) -{ - struct sys_device *dev = from_dev; - - list_del_init(&drv->entry); - if (!cls) - return; - - if (!drv->remove) - goto kset_put; - - if (dev) - list_for_each_entry_continue_reverse(dev, &cls->kset.list, - kobj.entry) - drv->remove(dev); - else - list_for_each_entry(dev, &cls->kset.list, kobj.entry) - drv->remove(dev); - -kset_put: - kset_put(&cls->kset); -} - -/** - * sysdev_driver_register - Register auxiliary driver - * @cls: Device class driver belongs to. - * @drv: Driver. - * - * @drv is inserted into @cls->drivers to be - * called on each operation on devices of that class. The refcount - * of @cls is incremented. - */ -int sysdev_driver_register(struct sysdev_class *cls, struct sysdev_driver *drv) -{ - struct sys_device *dev = NULL; - int err = 0; - - if (!cls) { - WARN(1, KERN_WARNING "sysdev: invalid class passed to %s!\n", - __func__); - return -EINVAL; - } - - /* Check whether this driver has already been added to a class. */ - if (drv->entry.next && !list_empty(&drv->entry)) - WARN(1, KERN_WARNING "sysdev: class %s: driver (%p) has already" - " been registered to a class, something is wrong, but " - "will forge on!\n", cls->name, drv); - - mutex_lock(&sysdev_drivers_lock); - if (cls && kset_get(&cls->kset)) { - list_add_tail(&drv->entry, &cls->drivers); - - /* If devices of this class already exist, tell the driver */ - if (drv->add) { - list_for_each_entry(dev, &cls->kset.list, kobj.entry) { - err = drv->add(dev); - if (err) - goto unwind; - } - } - } else { - err = -EINVAL; - WARN(1, KERN_ERR "%s: invalid device class\n", __func__); - } - - goto unlock; - -unwind: - __sysdev_driver_remove(cls, drv, dev); - -unlock: - mutex_unlock(&sysdev_drivers_lock); - return err; -} - -/** - * sysdev_driver_unregister - Remove an auxiliary driver. - * @cls: Class driver belongs to. - * @drv: Driver. - */ -void sysdev_driver_unregister(struct sysdev_class *cls, - struct sysdev_driver *drv) -{ - mutex_lock(&sysdev_drivers_lock); - __sysdev_driver_remove(cls, drv, NULL); - mutex_unlock(&sysdev_drivers_lock); -} -EXPORT_SYMBOL_GPL(sysdev_driver_register); -EXPORT_SYMBOL_GPL(sysdev_driver_unregister); - -/** - * sysdev_register - add a system device to the tree - * @sysdev: device in question - * - */ -int sysdev_register(struct sys_device *sysdev) -{ - int error; - struct sysdev_class *cls = sysdev->cls; - - if (!cls) - return -EINVAL; - - pr_debug("Registering sys device of class '%s'\n", - kobject_name(&cls->kset.kobj)); - - /* initialize the kobject to 0, in case it had previously been used */ - memset(&sysdev->kobj, 0x00, sizeof(struct kobject)); - - /* Make sure the kset is set */ - sysdev->kobj.kset = &cls->kset; - - /* Register the object */ - error = kobject_init_and_add(&sysdev->kobj, &ktype_sysdev, NULL, - "%s%d", kobject_name(&cls->kset.kobj), - sysdev->id); - - if (!error) { - struct sysdev_driver *drv; - - pr_debug("Registering sys device '%s'\n", - kobject_name(&sysdev->kobj)); - - mutex_lock(&sysdev_drivers_lock); - /* Generic notification is implicit, because it's that - * code that should have called us. - */ - - /* Notify class auxiliary drivers */ - list_for_each_entry(drv, &cls->drivers, entry) { - if (drv->add) - drv->add(sysdev); - } - mutex_unlock(&sysdev_drivers_lock); - kobject_uevent(&sysdev->kobj, KOBJ_ADD); - } - - return error; -} - -void sysdev_unregister(struct sys_device *sysdev) -{ - struct sysdev_driver *drv; - - mutex_lock(&sysdev_drivers_lock); - list_for_each_entry(drv, &sysdev->cls->drivers, entry) { - if (drv->remove) - drv->remove(sysdev); - } - mutex_unlock(&sysdev_drivers_lock); - - kobject_put(&sysdev->kobj); -} - -EXPORT_SYMBOL_GPL(sysdev_register); -EXPORT_SYMBOL_GPL(sysdev_unregister); - -#define to_ext_attr(x) container_of(x, struct sysdev_ext_attribute, attr) - -ssize_t sysdev_store_ulong(struct sys_device *sysdev, - struct sysdev_attribute *attr, - const char *buf, size_t size) -{ - struct sysdev_ext_attribute *ea = to_ext_attr(attr); - char *end; - unsigned long new = simple_strtoul(buf, &end, 0); - if (end == buf) - return -EINVAL; - *(unsigned long *)(ea->var) = new; - /* Always return full write size even if we didn't consume all */ - return size; -} -EXPORT_SYMBOL_GPL(sysdev_store_ulong); - -ssize_t sysdev_show_ulong(struct sys_device *sysdev, - struct sysdev_attribute *attr, - char *buf) -{ - struct sysdev_ext_attribute *ea = to_ext_attr(attr); - return snprintf(buf, PAGE_SIZE, "%lx\n", *(unsigned long *)(ea->var)); -} -EXPORT_SYMBOL_GPL(sysdev_show_ulong); - -ssize_t sysdev_store_int(struct sys_device *sysdev, - struct sysdev_attribute *attr, - const char *buf, size_t size) -{ - struct sysdev_ext_attribute *ea = to_ext_attr(attr); - char *end; - long new = simple_strtol(buf, &end, 0); - if (end == buf || new > INT_MAX || new < INT_MIN) - return -EINVAL; - *(int *)(ea->var) = new; - /* Always return full write size even if we didn't consume all */ - return size; -} -EXPORT_SYMBOL_GPL(sysdev_store_int); - -ssize_t sysdev_show_int(struct sys_device *sysdev, - struct sysdev_attribute *attr, - char *buf) -{ - struct sysdev_ext_attribute *ea = to_ext_attr(attr); - return snprintf(buf, PAGE_SIZE, "%d\n", *(int *)(ea->var)); -} -EXPORT_SYMBOL_GPL(sysdev_show_int); - diff --git a/include/linux/sysdev.h b/include/linux/sysdev.h deleted file mode 100644 index 20f63d3e6144..000000000000 --- a/include/linux/sysdev.h +++ /dev/null @@ -1,164 +0,0 @@ -/** - * System devices follow a slightly different driver model. - * They don't need to do dynammic driver binding, can't be probed, - * and don't reside on any type of peripheral bus. - * So, we represent and treat them a little differently. - * - * We still have a notion of a driver for a system device, because we still - * want to perform basic operations on these devices. - * - * We also support auxiliary drivers binding to devices of a certain class. - * - * This allows configurable drivers to register themselves for devices of - * a certain type. And, it allows class definitions to reside in generic - * code while arch-specific code can register specific drivers. - * - * Auxiliary drivers registered with a NULL cls are registered as drivers - * for all system devices, and get notification calls for each device. - */ - - -#ifndef _SYSDEV_H_ -#define _SYSDEV_H_ - -#include -#include - - -struct sys_device; -struct sysdev_class_attribute; - -struct sysdev_class { - const char *name; - struct list_head drivers; - struct sysdev_class_attribute **attrs; - struct kset kset; -}; - -struct sysdev_class_attribute { - struct attribute attr; - ssize_t (*show)(struct sysdev_class *, struct sysdev_class_attribute *, - char *); - ssize_t (*store)(struct sysdev_class *, struct sysdev_class_attribute *, - const char *, size_t); -}; - -#define _SYSDEV_CLASS_ATTR(_name,_mode,_show,_store) \ -{ \ - .attr = {.name = __stringify(_name), .mode = _mode }, \ - .show = _show, \ - .store = _store, \ -} - -#define SYSDEV_CLASS_ATTR(_name,_mode,_show,_store) \ - struct sysdev_class_attribute attr_##_name = \ - _SYSDEV_CLASS_ATTR(_name,_mode,_show,_store) - - -extern int sysdev_class_register(struct sysdev_class *); -extern void sysdev_class_unregister(struct sysdev_class *); - -extern int sysdev_class_create_file(struct sysdev_class *, - struct sysdev_class_attribute *); -extern void sysdev_class_remove_file(struct sysdev_class *, - struct sysdev_class_attribute *); -/** - * Auxiliary system device drivers. - */ - -struct sysdev_driver { - struct list_head entry; - int (*add)(struct sys_device *); - int (*remove)(struct sys_device *); -}; - - -extern int sysdev_driver_register(struct sysdev_class *, struct sysdev_driver *); -extern void sysdev_driver_unregister(struct sysdev_class *, struct sysdev_driver *); - - -/** - * sys_devices can be simplified a lot from regular devices, because they're - * simply not as versatile. - */ - -struct sys_device { - u32 id; - struct sysdev_class * cls; - struct kobject kobj; -}; - -extern int sysdev_register(struct sys_device *); -extern void sysdev_unregister(struct sys_device *); - - -struct sysdev_attribute { - struct attribute attr; - ssize_t (*show)(struct sys_device *, struct sysdev_attribute *, char *); - ssize_t (*store)(struct sys_device *, struct sysdev_attribute *, - const char *, size_t); -}; - - -#define _SYSDEV_ATTR(_name, _mode, _show, _store) \ -{ \ - .attr = { .name = __stringify(_name), .mode = _mode }, \ - .show = _show, \ - .store = _store, \ -} - -#define SYSDEV_ATTR(_name, _mode, _show, _store) \ - struct sysdev_attribute attr_##_name = \ - _SYSDEV_ATTR(_name, _mode, _show, _store); - -extern int sysdev_create_file(struct sys_device *, struct sysdev_attribute *); -extern void sysdev_remove_file(struct sys_device *, struct sysdev_attribute *); - -/* Create/remove NULL terminated attribute list */ -static inline int -sysdev_create_files(struct sys_device *d, struct sysdev_attribute **a) -{ - return sysfs_create_files(&d->kobj, (const struct attribute **)a); -} - -static inline void -sysdev_remove_files(struct sys_device *d, struct sysdev_attribute **a) -{ - return sysfs_remove_files(&d->kobj, (const struct attribute **)a); -} - -struct sysdev_ext_attribute { - struct sysdev_attribute attr; - void *var; -}; - -/* - * Support for simple variable sysdev attributes. - * The pointer to the variable is stored in a sysdev_ext_attribute - */ - -/* Add more types as needed */ - -extern ssize_t sysdev_show_ulong(struct sys_device *, struct sysdev_attribute *, - char *); -extern ssize_t sysdev_store_ulong(struct sys_device *, - struct sysdev_attribute *, const char *, size_t); -extern ssize_t sysdev_show_int(struct sys_device *, struct sysdev_attribute *, - char *); -extern ssize_t sysdev_store_int(struct sys_device *, - struct sysdev_attribute *, const char *, size_t); - -#define _SYSDEV_ULONG_ATTR(_name, _mode, _var) \ - { _SYSDEV_ATTR(_name, _mode, sysdev_show_ulong, sysdev_store_ulong), \ - &(_var) } -#define SYSDEV_ULONG_ATTR(_name, _mode, _var) \ - struct sysdev_ext_attribute attr_##_name = \ - _SYSDEV_ULONG_ATTR(_name, _mode, _var); -#define _SYSDEV_INT_ATTR(_name, _mode, _var) \ - { _SYSDEV_ATTR(_name, _mode, sysdev_show_int, sysdev_store_int), \ - &(_var) } -#define SYSDEV_INT_ATTR(_name, _mode, _var) \ - struct sysdev_ext_attribute attr_##_name = \ - _SYSDEV_INT_ATTR(_name, _mode, _var); - -#endif /* _SYSDEV_H_ */ -- GitLab From f0d5375e3c7b5d7f128af03c5271c328faeb3ae7 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 20 Jan 2012 11:55:54 +0100 Subject: [PATCH 0114/1359] ARM: 7289/1: vmlinux.lds.S: do not hardcode cacheline size as 32 bytes The linker script assumes a cacheline size of 32 bytes when aligning the .data..cacheline_aligned and .data..percpu sections. This patch updates the script to use L1_CACHE_BYTES, which should be set to 64 on platforms that require it. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/vmlinux.lds.S | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index f76e75548670..1077e4ff6f3c 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -4,6 +4,7 @@ */ #include +#include #include #include #include @@ -181,7 +182,7 @@ SECTIONS } #endif - PERCPU_SECTION(32) + PERCPU_SECTION(L1_CACHE_BYTES) #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ @@ -212,8 +213,8 @@ SECTIONS #endif NOSAVE_DATA - CACHELINE_ALIGNED_DATA(32) - READ_MOSTLY_DATA(32) + CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES) + READ_MOSTLY_DATA(L1_CACHE_BYTES) /* * The exception fixup table (might need resorting at runtime) -- GitLab From 972da06470519b6eaef9776a586e2353f089de9c Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 20 Jan 2012 12:01:09 +0100 Subject: [PATCH 0115/1359] ARM: 7290/1: vmlinux.lds.S: align the exception fixup table to a 4-byte boundary The exception fixup table is currently aligned to a 32-byte boundary. Whilst this won't cause any problems, the exception_table_entry structures contain only a pair of unsigned longs, so 4-byte alignment is all that is required. If the table was walked from start to end, cacheline alignment may bring some performance benefits, but since a binary search is used, the access pattern is random and will not benefit from a stricter alignment. Acked-by: Nicolas Pitre Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/kernel/vmlinux.lds.S | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 1077e4ff6f3c..1e19691e0406 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -219,7 +219,7 @@ SECTIONS /* * The exception fixup table (might need resorting at runtime) */ - . = ALIGN(32); + . = ALIGN(4); __start___ex_table = .; #ifdef CONFIG_MMU *(__ex_table) -- GitLab From a092f2b15399bb4d1aa4e83cffe775f0c946f323 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 20 Jan 2012 12:01:10 +0100 Subject: [PATCH 0116/1359] ARM: 7291/1: cache: assume 64-byte L1 cachelines for ARMv7 CPUs To ensure correct alignment of cacheline-aligned data, the maximum cacheline size needs to be known at compile time. Since Cortex-A8 and Cortex-A15 have 64-byte cachelines (and it is likely that there will be future ARMv7 implementations with the same line size) then it makes sense to assume that CPU_V7 implies a 64-byte L1 cacheline size. For CPUs with smaller caches, this will result in some harmless padding but will help with single zImage work and avoid hitting subtle bugs with misaligned data structures. Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/Kconfig | 2 -- arch/arm/mach-mx5/Kconfig | 3 --- arch/arm/mach-omap2/Kconfig | 1 - arch/arm/mm/Kconfig | 1 + 4 files changed, 1 insertion(+), 6 deletions(-) diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index bb68e65ab180..a48aecc17eac 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -825,7 +825,6 @@ config ARCH_S5PC100 select HAVE_CLK select CLKDEV_LOOKUP select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 select ARCH_USES_GETTIMEOFFSET select HAVE_S3C2410_I2C if I2C select HAVE_S3C_RTC if RTC_CLASS @@ -842,7 +841,6 @@ config ARCH_S5PV210 select HAVE_CLK select CLKDEV_LOOKUP select CLKSRC_MMIO - select ARM_L1_CACHE_SHIFT_6 select ARCH_HAS_CPUFREQ select GENERIC_CLOCKEVENTS select HAVE_SCHED_CLOCK diff --git a/arch/arm/mach-mx5/Kconfig b/arch/arm/mach-mx5/Kconfig index af0c212e3c7b..9cf4c3c1914d 100644 --- a/arch/arm/mach-mx5/Kconfig +++ b/arch/arm/mach-mx5/Kconfig @@ -15,7 +15,6 @@ config ARCH_MX53 config SOC_IMX50 bool select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 select MXC_TZIC select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 @@ -25,7 +24,6 @@ config SOC_IMX50 config SOC_IMX51 bool select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 select MXC_TZIC select ARCH_MXC_IOMUX_V3 select ARCH_MXC_AUDMUX_V2 @@ -35,7 +33,6 @@ config SOC_IMX51 config SOC_IMX53 bool select CPU_V7 - select ARM_L1_CACHE_SHIFT_6 select MXC_TZIC select ARCH_MXC_IOMUX_V3 select ARCH_MX53 diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index a8ba7b96dcd1..41e6612ecbaf 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -33,7 +33,6 @@ config ARCH_OMAP3 default y select CPU_V7 select USB_ARCH_HAS_EHCI - select ARM_L1_CACHE_SHIFT_6 if !ARCH_OMAP4 select ARCH_HAS_OPP select PM_OPP if PM select ARM_CPU_SUSPEND if PM diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index 4cefb57d9ed2..1a3ca2488164 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -882,6 +882,7 @@ config CACHE_XSC3L2 config ARM_L1_CACHE_SHIFT_6 bool + default y if CPU_V7 help Setting ARM L1 cache line size to 64 Bytes. -- GitLab From eb50439b92b6298bf209a982f295ba9c0f7cb30b Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 20 Jan 2012 12:01:12 +0100 Subject: [PATCH 0117/1359] ARM: 7293/1: logical_cpu_map: decouple CPU mapping from SMP It turns out that the logical CPU mapping is useful even when !CONFIG_SMP for manipulation of devices like interrupt and power controllers when running a UP kernel on a CPU other than 0. This can happen when kexecing a UP image from an SMP kernel. In the future, multi-cluster systems running AMP configurations will require something similar for mapping cluster IDs, so it makes sense to decouple this logic in preparation for this support. Acked-by: Yang Bai Acked-by: Marc Zyngier Reported-by: Joerg Roedel Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/common/gic.c | 7 ++----- arch/arm/include/asm/smp.h | 6 ------ arch/arm/include/asm/smp_plat.h | 6 ++++++ arch/arm/kernel/setup.c | 14 ++++++++++++++ arch/arm/kernel/smp.c | 14 -------------- arch/arm/mach-exynos/hotplug.c | 1 + arch/arm/mach-exynos/platsmp.c | 1 + arch/arm/mach-highbank/highbank.c | 3 +-- arch/arm/mach-imx/src.c | 5 +---- arch/arm/mach-msm/hotplug.c | 1 + arch/arm/mach-msm/platsmp.c | 1 + arch/arm/mach-realview/hotplug.c | 1 + arch/arm/mach-shmobile/smp-r8a7779.c | 1 + arch/arm/mach-shmobile/smp-sh73a0.c | 1 + arch/arm/mach-ux500/hotplug.c | 1 + arch/arm/mach-ux500/platsmp.c | 1 + arch/arm/mach-vexpress/hotplug.c | 1 + arch/arm/plat-versatile/platsmp.c | 1 + 18 files changed, 35 insertions(+), 31 deletions(-) diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c index b2dc2dd7f1df..c47d6199b784 100644 --- a/arch/arm/common/gic.c +++ b/arch/arm/common/gic.c @@ -41,6 +41,7 @@ #include #include +#include #include #include @@ -352,11 +353,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic) unsigned int gic_irqs = gic->gic_irqs; struct irq_domain *domain = &gic->domain; void __iomem *base = gic_data_dist_base(gic); - u32 cpu = 0; - -#ifdef CONFIG_SMP - cpu = cpu_logical_map(smp_processor_id()); -#endif + u32 cpu = cpu_logical_map(smp_processor_id()); cpumask = 1 << cpu; cpumask |= cpumask << 8; diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index 1e5717afc4ac..ae29293270a3 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -70,12 +70,6 @@ extern void platform_secondary_init(unsigned int cpu); */ extern void platform_smp_prepare_cpus(unsigned int); -/* - * Logical CPU mapping. - */ -extern int __cpu_logical_map[NR_CPUS]; -#define cpu_logical_map(cpu) __cpu_logical_map[cpu] - /* * Initial data for bringing up a secondary CPU. */ diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h index f24c1b9e211d..558d6c80aca9 100644 --- a/arch/arm/include/asm/smp_plat.h +++ b/arch/arm/include/asm/smp_plat.h @@ -43,4 +43,10 @@ static inline int cache_ops_need_broadcast(void) } #endif +/* + * Logical CPU mapping. + */ +extern int __cpu_logical_map[]; +#define cpu_logical_map(cpu) __cpu_logical_map[cpu] + #endif diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index ab70c9124538..a255c39612ca 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -426,6 +426,20 @@ void cpu_init(void) : "r14"); } +int __cpu_logical_map[NR_CPUS]; + +void __init smp_setup_processor_id(void) +{ + int i; + u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0; + + cpu_logical_map(0) = cpu; + for (i = 1; i < NR_CPUS; ++i) + cpu_logical_map(i) = i == cpu ? 0 : i; + + printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu); +} + static void __init setup_processor(void) { struct proc_info_list *list; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 26cdc494ee9b..cdeb727527d3 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -233,20 +233,6 @@ void __ref cpu_die(void) } #endif /* CONFIG_HOTPLUG_CPU */ -int __cpu_logical_map[NR_CPUS]; - -void __init smp_setup_processor_id(void) -{ - int i; - u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0; - - cpu_logical_map(0) = cpu; - for (i = 1; i < NR_CPUS; ++i) - cpu_logical_map(i) = i == cpu ? 0 : i; - - printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu); -} - /* * Called by both boot and secondaries to move global data into * per-processor storage. diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c index da70e7e39937..dd1ad55524c9 100644 --- a/arch/arm/mach-exynos/hotplug.c +++ b/arch/arm/mach-exynos/hotplug.c @@ -16,6 +16,7 @@ #include #include +#include #include diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 683aec786b78..0f2035a1eb6e 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -23,6 +23,7 @@ #include #include +#include #include #include diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 7afbe1e55beb..8394d512a402 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -25,6 +25,7 @@ #include #include +#include #include #include #include @@ -72,9 +73,7 @@ static void __init highbank_map_io(void) void highbank_set_cpu_jump(int cpu, void *jump_addr) { -#ifdef CONFIG_SMP cpu = cpu_logical_map(cpu); -#endif writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu)); __cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16); outer_clean_range(HB_JUMP_TABLE_PHYS(cpu), diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c index 29bd1243781e..e15f1555c59b 100644 --- a/arch/arm/mach-imx/src.c +++ b/arch/arm/mach-imx/src.c @@ -15,6 +15,7 @@ #include #include #include +#include #define SRC_SCR 0x000 #define SRC_GPR1 0x020 @@ -24,10 +25,6 @@ static void __iomem *src_base; -#ifndef CONFIG_SMP -#define cpu_logical_map(cpu) 0 -#endif - void imx_enable_cpu(int cpu, bool enable) { u32 mask, val; diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c index 41c252de0215..a446fc14221f 100644 --- a/arch/arm/mach-msm/hotplug.c +++ b/arch/arm/mach-msm/hotplug.c @@ -11,6 +11,7 @@ #include #include +#include extern volatile int pen_release; diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c index 0b3e357c4c8c..db0117ec55f4 100644 --- a/arch/arm/mach-msm/platsmp.c +++ b/arch/arm/mach-msm/platsmp.c @@ -20,6 +20,7 @@ #include #include #include +#include #include diff --git a/arch/arm/mach-realview/hotplug.c b/arch/arm/mach-realview/hotplug.c index ac1aed2a8da4..eb55f05bef3a 100644 --- a/arch/arm/mach-realview/hotplug.c +++ b/arch/arm/mach-realview/hotplug.c @@ -13,6 +13,7 @@ #include #include +#include extern volatile int pen_release; diff --git a/arch/arm/mach-shmobile/smp-r8a7779.c b/arch/arm/mach-shmobile/smp-r8a7779.c index cc97ef892d1b..4fe2e9eaf501 100644 --- a/arch/arm/mach-shmobile/smp-r8a7779.c +++ b/arch/arm/mach-shmobile/smp-r8a7779.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-shmobile/smp-sh73a0.c b/arch/arm/mach-shmobile/smp-sh73a0.c index be1ade76ccc8..0d159d64a345 100644 --- a/arch/arm/mach-shmobile/smp-sh73a0.c +++ b/arch/arm/mach-shmobile/smp-sh73a0.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-ux500/hotplug.c b/arch/arm/mach-ux500/hotplug.c index 572015e57cd9..c76f0f456f04 100644 --- a/arch/arm/mach-ux500/hotplug.c +++ b/arch/arm/mach-ux500/hotplug.c @@ -13,6 +13,7 @@ #include #include +#include extern volatile int pen_release; diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index a19e398dade3..d2058ef8345f 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -19,6 +19,7 @@ #include #include +#include #include #include #include diff --git a/arch/arm/mach-vexpress/hotplug.c b/arch/arm/mach-vexpress/hotplug.c index 813ee08f96e6..3034a4dab4a1 100644 --- a/arch/arm/mach-vexpress/hotplug.c +++ b/arch/arm/mach-vexpress/hotplug.c @@ -13,6 +13,7 @@ #include #include +#include #include extern volatile int pen_release; diff --git a/arch/arm/plat-versatile/platsmp.c b/arch/arm/plat-versatile/platsmp.c index 92f18d372b69..49c7db48c7f1 100644 --- a/arch/arm/plat-versatile/platsmp.c +++ b/arch/arm/plat-versatile/platsmp.c @@ -16,6 +16,7 @@ #include #include +#include #include /* -- GitLab From 868dbf905245a524496a0535982ed21ad3be5585 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 20 Jan 2012 12:01:14 +0100 Subject: [PATCH 0118/1359] ARM: 7295/1: cortex-a7: move proc_info out of !CONFIG_ARM_LPAE block The merging of commits 1b6ba46b ("ARM: LPAE: MMU setup for the 3-level page table format") and b4244738 ("ARM: 7202/1: Add Cortex-A7 proc info") during the merge window ended up putting the Cortex-A7 proc_info into a code block guarded by !CONFIG_ARM_LPAE. This makes Cortex-A7 platforms unbootable when LPAE is enabled. This patch moves the proc_info structure for Cortex-A7 outside of the guarded block. Cc: Pawel Moll Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 20 ++++++++++---------- 1 file changed, 10 insertions(+), 10 deletions(-) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index 7e9b5bf910c1..b15597400105 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -329,16 +329,6 @@ __v7_ca5mp_proc_info: __v7_proc __v7_ca5mp_setup .size __v7_ca5mp_proc_info, . - __v7_ca5mp_proc_info - /* - * ARM Ltd. Cortex A7 processor. - */ - .type __v7_ca7mp_proc_info, #object -__v7_ca7mp_proc_info: - .long 0x410fc070 - .long 0xff0ffff0 - __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV - .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info - /* * ARM Ltd. Cortex A9 processor. */ @@ -350,6 +340,16 @@ __v7_ca9mp_proc_info: .size __v7_ca9mp_proc_info, . - __v7_ca9mp_proc_info #endif /* CONFIG_ARM_LPAE */ + /* + * ARM Ltd. Cortex A7 processor. + */ + .type __v7_ca7mp_proc_info, #object +__v7_ca7mp_proc_info: + .long 0x410fc070 + .long 0xff0ffff0 + __v7_proc __v7_ca7mp_setup, hwcaps = HWCAP_IDIV + .size __v7_ca7mp_proc_info, . - __v7_ca7mp_proc_info + /* * ARM Ltd. Cortex A15 processor. */ -- GitLab From 612539e81f655f6ac73c7af1da8701c1ee618aee Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 20 Jan 2012 12:10:18 +0100 Subject: [PATCH 0119/1359] ARM: 7296/1: proc-v7.S: remove HARVARD_CACHE preprocessor guards On v7, we use the same cache maintenance instructions for data lines as for unified lines. This was not the case for v6, where HARVARD_CACHE was defined to indicate the L1 cache topology. This patch removes the erroneous compile-time check for HARVARD_CACHE in proc-v7.S, ensuring that we perform I-side invalidation at boot. Reported-and-Acked-by: Shawn Guo Cc: stable Acked-by: Catalin Marinas Signed-off-by: Will Deacon Signed-off-by: Russell King --- arch/arm/mm/proc-v7.S | 6 ------ 1 file changed, 6 deletions(-) diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S index b15597400105..0404ccbb8aa3 100644 --- a/arch/arm/mm/proc-v7.S +++ b/arch/arm/mm/proc-v7.S @@ -148,10 +148,6 @@ ENDPROC(cpu_v7_do_resume) * Initialise TLB, Caches, and MMU state ready to switch the MMU * on. Return in r0 the new CP15 C1 control register setting. * - * We automatically detect if we have a Harvard cache, and use the - * Harvard cache control instructions insead of the unified cache - * control instructions. - * * This should be able to cover all ARMv7 cores. * * It is assumed that: @@ -251,9 +247,7 @@ __v7_setup: #endif 3: mov r10, #0 -#ifdef HARVARD_CACHE mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate -#endif dsb #ifdef CONFIG_MMU mcr p15, 0, r10, c8, c7, 0 @ invalidate I + D TLBs -- GitLab From c214455f3205fa20819da6d67a8b20609ff786e7 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Fri, 20 Jan 2012 12:24:47 +0100 Subject: [PATCH 0120/1359] ARM: 7297/1: smp_twd: make sure timer is stopped before registering it On secondary CPUs, the Timer Control Register is not reset to a sane value before the timer is registered, and the TRM doesn't seem to indicate any reset value either. In some cases, the kernel will take an interrupt too early, depending on what junk was present in the registers at reset time. The fix is to set the Timer Control Register to 0 before registering the clock_event_device and enabling the interrupt. Problem seen on VE (Cortex A5) and Tegra. Signed-off-by: Marc Zyngier Signed-off-by: Russell King --- arch/arm/kernel/smp_twd.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index c8e938553d47..4285daa077b0 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -252,6 +252,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk) else twd_calibrate_rate(); + __raw_writel(0, twd_base + TWD_TIMER_CONTROL); + clk->name = "local_timer"; clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP; -- GitLab From b3945bcbc3f9856f4b5452079bfc2b9738040a37 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 20 Jan 2012 07:54:51 +0100 Subject: [PATCH 0121/1359] ARM: 7288/1: mach-sa1100: add missing module_init() call The Jornada SSP driver is supposed to be initialized by a module_init() call, but it was missed at some merge point. Since the driver mostly pass calls through it magically works anyway, but needs to be rectified. Cc: Kristoffer Ericson Signed-off-by: Linus Walleij Signed-off-by: Russell King --- arch/arm/mach-sa1100/jornada720_ssp.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-sa1100/jornada720_ssp.c b/arch/arm/mach-sa1100/jornada720_ssp.c index f50b00bd18a0..b412fc09c80c 100644 --- a/arch/arm/mach-sa1100/jornada720_ssp.c +++ b/arch/arm/mach-sa1100/jornada720_ssp.c @@ -198,3 +198,5 @@ static int __init jornada_ssp_init(void) { return platform_driver_register(&jornadassp_driver); } + +module_init(jornada_ssp_init); -- GitLab From af1be04901e27ce669b4ecde1c953d5c939498f5 Mon Sep 17 00:00:00 2001 From: Joerg Roedel Date: Wed, 18 Jan 2012 14:03:11 +0100 Subject: [PATCH 0122/1359] iommu/amd: Work around broken IVRS tables On some systems the IVRS table does not contain all PCI devices present in the system. In case a device not present in the IVRS table is translated by the IOMMU no DMA is possible from that device by default. This patch fixes this by removing the DTE entry for every PCI device present in the system and not covered by IVRS. Cc: stable@vger.kernel.org # >= 3.0 Signed-off-by: Joerg Roedel --- drivers/iommu/amd_iommu.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/iommu/amd_iommu.c b/drivers/iommu/amd_iommu.c index cce1f03b8895..f75e0608be5b 100644 --- a/drivers/iommu/amd_iommu.c +++ b/drivers/iommu/amd_iommu.c @@ -2863,6 +2863,9 @@ static unsigned device_dma_ops_init(void) for_each_pci_dev(pdev) { if (!check_device(&pdev->dev)) { + + iommu_ignore_device(&pdev->dev); + unhandled += 1; continue; } -- GitLab From 620c231c7a7f48745094727bb612f6321cfc8844 Mon Sep 17 00:00:00 2001 From: Lucas De Marchi Date: Tue, 17 Jan 2012 14:50:51 -0200 Subject: [PATCH 0123/1359] kbuild: do not check for ancient modutils tools scripts/depmod.sh checks for the output of '-V' expecting that it has module-init-tools in it. It's a hack to prevent users from using modutils instead of module-init-tools, that only works with 2.4.x kernels. This however prints an annoying warning for kmod tool, that is currently replacing module-init-tools. Rather than putting another check for kmod's version, just remove it since users of 2.4.x kernel are unlikely to upgrade to 3.x, and if they do, let depmod fail in that case because they should know what they are doing. Signed-off-by: Lucas De Marchi Acked-by: WANG Cong Acked-By: Kay Sievers Signed-off-by: Michal Marek --- scripts/depmod.sh | 6 ------ 1 file changed, 6 deletions(-) diff --git a/scripts/depmod.sh b/scripts/depmod.sh index a27235685949..2ae481703141 100755 --- a/scripts/depmod.sh +++ b/scripts/depmod.sh @@ -9,12 +9,6 @@ fi DEPMOD=$1 KERNELRELEASE=$2 -if ! "$DEPMOD" -V 2>/dev/null | grep -q module-init-tools; then - echo "Warning: you may need to install module-init-tools" >&2 - echo "See http://www.codemonkey.org.uk/docs/post-halloween-2.6.txt" >&2 - sleep 1 -fi - if ! test -r System.map -a -x "$DEPMOD"; then exit 0 fi -- GitLab From d07a74a546981a09ba490936645fbf0d1340b96c Mon Sep 17 00:00:00 2001 From: "Dr. David Alan Gilbert" Date: Thu, 25 Aug 2011 16:13:55 -0700 Subject: [PATCH 0124/1359] dmaengine: fix missing 'cnt' in ?: in dmatest Hi, On the latest tree my compiler has started giving the warning: drivers/dma/dmatest.c:575:28: warning: the omitted middle operand in ?: will always be ?true?, suggest explicit middle operand [-Wparentheses] The following patch fixes the missing middle clause with the same fix that Nicolas Ferre used in the similar clauses. (There seems to have been a race between him fixing that and the extra clause going in a little later). I don't actually know the dmatest code/structures, nor do I own any hardware to test it on (assuming it needs a DMA engine); but this patch builds, the existing code is almost certainly wrong and the fix is the same as the corresponding lines above it. (WTH is x=y?:z legal C anyway?) Signed-off-by: Dr. David Alan Gilbert Reported-by: Dan Carpenter Reported-by: Paul Gortmaker Acked-by: Nicolas Ferre Signed-off-by: Dan Williams --- drivers/dma/dmatest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 2b8661b54eaf..24225f0fdcd8 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -599,7 +599,7 @@ static int dmatest_add_channel(struct dma_chan *chan) } if (dma_has_cap(DMA_PQ, dma_dev->cap_mask)) { cnt = dmatest_add_threads(dtc, DMA_PQ); - thread_count += cnt > 0 ?: 0; + thread_count += cnt > 0 ? cnt : 0; } pr_info("dmatest: Started %u threads using %s\n", -- GitLab From 9bf31efa84c898a0cf294bacdfe8edcac24e6318 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 18 Jan 2012 13:57:33 -0300 Subject: [PATCH 0125/1359] [media] cxd2820r: fix dvb_frontend_ops Fix bug introduced by multi-frontend to single-frontend change. * Add missing DVB-C caps * Change frontend name as single frontend does all the standards Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/cxd2820r_core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb/frontends/cxd2820r_core.c index caae7f79c837..5fe591d226f5 100644 --- a/drivers/media/dvb/frontends/cxd2820r_core.c +++ b/drivers/media/dvb/frontends/cxd2820r_core.c @@ -562,7 +562,7 @@ static const struct dvb_frontend_ops cxd2820r_ops = { .delsys = { SYS_DVBT, SYS_DVBT2, SYS_DVBC_ANNEX_A }, /* default: DVB-T/T2 */ .info = { - .name = "Sony CXD2820R (DVB-T/T2)", + .name = "Sony CXD2820R", .caps = FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | @@ -572,7 +572,9 @@ static const struct dvb_frontend_ops cxd2820r_ops = { FE_CAN_FEC_AUTO | FE_CAN_QPSK | FE_CAN_QAM_16 | + FE_CAN_QAM_32 | FE_CAN_QAM_64 | + FE_CAN_QAM_128 | FE_CAN_QAM_256 | FE_CAN_QAM_AUTO | FE_CAN_TRANSMISSION_MODE_AUTO | -- GitLab From c2bbbe7b5e79974c5ed1c828690731f6f5106bee Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Thu, 19 Jan 2012 14:46:43 -0300 Subject: [PATCH 0126/1359] [media] cxd2820r: remove unused parameter from cxd2820r_attach Fix bug introduced by multi-frontend to single-frontend change. This parameter is no longer used after multi-frontend to single-frontend change. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/anysee.c | 3 +-- drivers/media/dvb/frontends/cxd2820r.h | 6 ++---- drivers/media/dvb/frontends/cxd2820r_core.c | 3 +-- drivers/media/video/em28xx/em28xx-dvb.c | 3 +-- 4 files changed, 5 insertions(+), 10 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index ecc3addc77ec..7b77c7b29f65 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -887,8 +887,7 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap) /* attach demod */ adap->fe_adap[state->fe_id].fe = dvb_attach(cxd2820r_attach, - &anysee_cxd2820r_config, &adap->dev->i2c_adap, - NULL); + &anysee_cxd2820r_config, &adap->dev->i2c_adap); state->has_ci = true; diff --git a/drivers/media/dvb/frontends/cxd2820r.h b/drivers/media/dvb/frontends/cxd2820r.h index cf0f546aa1d1..5aa306ebb7ef 100644 --- a/drivers/media/dvb/frontends/cxd2820r.h +++ b/drivers/media/dvb/frontends/cxd2820r.h @@ -77,14 +77,12 @@ struct cxd2820r_config { (defined(CONFIG_DVB_CXD2820R_MODULE) && defined(MODULE)) extern struct dvb_frontend *cxd2820r_attach( const struct cxd2820r_config *config, - struct i2c_adapter *i2c, - struct dvb_frontend *fe + struct i2c_adapter *i2c ); #else static inline struct dvb_frontend *cxd2820r_attach( const struct cxd2820r_config *config, - struct i2c_adapter *i2c, - struct dvb_frontend *fe + struct i2c_adapter *i2c ) { printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb/frontends/cxd2820r_core.c index 5fe591d226f5..bdfa207a883e 100644 --- a/drivers/media/dvb/frontends/cxd2820r_core.c +++ b/drivers/media/dvb/frontends/cxd2820r_core.c @@ -604,8 +604,7 @@ static const struct dvb_frontend_ops cxd2820r_ops = { }; struct dvb_frontend *cxd2820r_attach(const struct cxd2820r_config *cfg, - struct i2c_adapter *i2c, - struct dvb_frontend *fe) + struct i2c_adapter *i2c) { struct cxd2820r_priv *priv = NULL; int ret; diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 9449423098e0..aabbf4854f66 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -853,8 +853,7 @@ static int em28xx_dvb_init(struct em28xx *dev) case EM28174_BOARD_PCTV_290E: dvb->fe[0] = dvb_attach(cxd2820r_attach, &em28xx_cxd2820r_config, - &dev->i2c_adap, - NULL); + &dev->i2c_adap); if (dvb->fe[0]) { /* FE 0 attach tuner */ if (!dvb_attach(tda18271_attach, -- GitLab From 46de20a78ae4b122b79fc02633e9a6c3d539ecad Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Fri, 20 Jan 2012 17:39:17 -0300 Subject: [PATCH 0127/1359] [media] anysee: fix CI init No more error that error seen when device is plugged: dvb_ca adapter 0: Invalid PC card inserted :( Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/anysee.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/media/dvb/dvb-usb/anysee.c b/drivers/media/dvb/dvb-usb/anysee.c index 7b77c7b29f65..fdee856acab0 100644 --- a/drivers/media/dvb/dvb-usb/anysee.c +++ b/drivers/media/dvb/dvb-usb/anysee.c @@ -1188,6 +1188,14 @@ static int anysee_ci_init(struct dvb_usb_device *d) if (ret) return ret; + ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 2)|(0 << 1)|(0 << 0), 0x07); + if (ret) + return ret; + + ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 2)|(1 << 1)|(1 << 0), 0x07); + if (ret) + return ret; + ret = dvb_ca_en50221_init(&d->adapter[0].dvb_adap, &state->ci, 0, 1); if (ret) return ret; -- GitLab From 72565224609a23a60d10fcdf42f87a2fa8f7b16d Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Fri, 20 Jan 2012 19:48:28 -0300 Subject: [PATCH 0128/1359] [media] cxd2820r: sleep on DVB-T/T2 delivery system switch Fix bug introduced by multi-frontend to single-frontend change. It is safer to put DVB-T parts sleeping when auto-switching to DVB-T2 and vice versa. That was original behaviour. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/frontends/cxd2820r_core.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb/frontends/cxd2820r_core.c b/drivers/media/dvb/frontends/cxd2820r_core.c index bdfa207a883e..5c7c2aaf9bf5 100644 --- a/drivers/media/dvb/frontends/cxd2820r_core.c +++ b/drivers/media/dvb/frontends/cxd2820r_core.c @@ -482,10 +482,19 @@ static enum dvbfe_search cxd2820r_search(struct dvb_frontend *fe) /* switch between DVB-T and DVB-T2 when tune fails */ if (priv->last_tune_failed) { - if (priv->delivery_system == SYS_DVBT) + if (priv->delivery_system == SYS_DVBT) { + ret = cxd2820r_sleep_t(fe); + if (ret) + goto error; + c->delivery_system = SYS_DVBT2; - else if (priv->delivery_system == SYS_DVBT2) + } else if (priv->delivery_system == SYS_DVBT2) { + ret = cxd2820r_sleep_t2(fe); + if (ret) + goto error; + c->delivery_system = SYS_DVBT; + } } /* set frontend */ -- GitLab From 03652e0ad4b140523ec5ef7fec8d2b3c7218447b Mon Sep 17 00:00:00 2001 From: Josh Wu Date: Wed, 11 Jan 2012 00:58:29 -0300 Subject: [PATCH 0129/1359] [media] V4L: atmel-isi: add clk_prepare()/clk_unprepare() functions Signed-off-by: Josh Wu Acked-by: Nicolas Ferre Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab --- drivers/media/video/atmel-isi.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c index 9fe4519176a4..ec3f6a06f9c3 100644 --- a/drivers/media/video/atmel-isi.c +++ b/drivers/media/video/atmel-isi.c @@ -922,7 +922,9 @@ static int __devexit atmel_isi_remove(struct platform_device *pdev) isi->fb_descriptors_phys); iounmap(isi->regs); + clk_unprepare(isi->mck); clk_put(isi->mck); + clk_unprepare(isi->pclk); clk_put(isi->pclk); kfree(isi); @@ -955,6 +957,10 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev) if (IS_ERR(pclk)) return PTR_ERR(pclk); + ret = clk_prepare(pclk); + if (ret) + goto err_clk_prepare_pclk; + isi = kzalloc(sizeof(struct atmel_isi), GFP_KERNEL); if (!isi) { ret = -ENOMEM; @@ -978,6 +984,10 @@ static int __devinit atmel_isi_probe(struct platform_device *pdev) goto err_clk_get; } + ret = clk_prepare(isi->mck); + if (ret) + goto err_clk_prepare_mck; + /* Set ISI_MCK's frequency, it should be faster than pixel clock */ ret = clk_set_rate(isi->mck, pdata->mck_hz); if (ret < 0) @@ -1059,10 +1069,14 @@ err_alloc_ctx: isi->fb_descriptors_phys); err_alloc_descriptors: err_set_mck_rate: + clk_unprepare(isi->mck); +err_clk_prepare_mck: clk_put(isi->mck); err_clk_get: kfree(isi); err_alloc_isi: + clk_unprepare(pclk); +err_clk_prepare_pclk: clk_put(pclk); return ret; -- GitLab From c79eba92406acc4898adcd1689fc21a6aa91ed0b Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 23 Jan 2012 13:15:22 -0200 Subject: [PATCH 0130/1359] [media] cinergyT2-fe: Fix bandwdith settings Changeset 7830bbaff9f mangled the bandwidth field for CinergyT2. Properly fill it. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/dvb/dvb-usb/cinergyT2-fe.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/media/dvb/dvb-usb/cinergyT2-fe.c b/drivers/media/dvb/dvb-usb/cinergyT2-fe.c index 8a57ed8272de..1efc028a76c9 100644 --- a/drivers/media/dvb/dvb-usb/cinergyT2-fe.c +++ b/drivers/media/dvb/dvb-usb/cinergyT2-fe.c @@ -276,14 +276,15 @@ static int cinergyt2_fe_set_frontend(struct dvb_frontend *fe) param.flags = 0; switch (fep->bandwidth_hz) { + default: case 8000000: - param.bandwidth = 0; + param.bandwidth = 8; break; case 7000000: - param.bandwidth = 1; + param.bandwidth = 7; break; case 6000000: - param.bandwidth = 2; + param.bandwidth = 6; break; } -- GitLab From 875ad3f8e7dff6bc1d053e5bfe73d8e8d2e6ae67 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 23 Jan 2012 12:49:36 -0500 Subject: [PATCH 0131/1359] SUNRPC: Fix machine creds in generic_create_cred and generic_match - generic_create_cred needs to copy the '.principal' field. - generic_match needs to ignore the groups and match on the '.principal' field. This fixes an Oops that was introduced by commit 68c9715 (SUNRPC: Clean up the RPCSEC_GSS service ticket requests) Reported-by: J. Bruce Fields Signed-off-by: Trond Myklebust Tested-by: J. Bruce Fields --- net/sunrpc/auth_generic.c | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/net/sunrpc/auth_generic.c b/net/sunrpc/auth_generic.c index 1426ec3d0a53..75762f346975 100644 --- a/net/sunrpc/auth_generic.c +++ b/net/sunrpc/auth_generic.c @@ -92,6 +92,7 @@ generic_create_cred(struct rpc_auth *auth, struct auth_cred *acred, int flags) if (gcred->acred.group_info != NULL) get_group_info(gcred->acred.group_info); gcred->acred.machine_cred = acred->machine_cred; + gcred->acred.principal = acred->principal; dprintk("RPC: allocated %s cred %p for uid %d gid %d\n", gcred->acred.machine_cred ? "machine" : "generic", @@ -123,6 +124,17 @@ generic_destroy_cred(struct rpc_cred *cred) call_rcu(&cred->cr_rcu, generic_free_cred_callback); } +static int +machine_cred_match(struct auth_cred *acred, struct generic_cred *gcred, int flags) +{ + if (!gcred->acred.machine_cred || + gcred->acred.principal != acred->principal || + gcred->acred.uid != acred->uid || + gcred->acred.gid != acred->gid) + return 0; + return 1; +} + /* * Match credentials against current process creds. */ @@ -132,9 +144,12 @@ generic_match(struct auth_cred *acred, struct rpc_cred *cred, int flags) struct generic_cred *gcred = container_of(cred, struct generic_cred, gc_base); int i; + if (acred->machine_cred) + return machine_cred_match(acred, gcred, flags); + if (gcred->acred.uid != acred->uid || gcred->acred.gid != acred->gid || - gcred->acred.machine_cred != acred->machine_cred) + gcred->acred.machine_cred != 0) goto out_nomatch; /* Optimisation in the case where pointers are identical... */ -- GitLab From 04f47a03c51c9f02fa27b0ecf4207e25c0741804 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 22 Jan 2012 14:57:25 -0500 Subject: [PATCH 0132/1359] arm: fix compile failure in mach-shmobile/board-ag5evm.c Add videodev2 header which provides V4L2_PIX_FMT_RGB565 to fix: arch/arm/mach-shmobile/board-ag5evm.c:274: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function) Signed-off-by: Paul Gortmaker Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index a4e6ca04e319..75596948029c 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include -- GitLab From f5948bac5f22e7697fc782e45bdca20a27368512 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Sun, 22 Jan 2012 21:10:02 -0800 Subject: [PATCH 0133/1359] ARM: mach-shmobile: clock-sh73a0: add DSIxPHY clock support Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/board-ag5evm.c | 16 +++- arch/arm/mach-shmobile/clock-sh73a0.c | 113 ++++++++++++++++++++++++++ 2 files changed, 125 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-shmobile/board-ag5evm.c b/arch/arm/mach-shmobile/board-ag5evm.c index 729eaee5a151..2e1334f56995 100644 --- a/arch/arm/mach-shmobile/board-ag5evm.c +++ b/arch/arm/mach-shmobile/board-ag5evm.c @@ -314,12 +314,11 @@ static struct resource mipidsi0_resources[] = { }, }; -#define DSI0PHYCR 0xe615006c static int sh_mipi_set_dot_clock(struct platform_device *pdev, void __iomem *base, int enable) { - struct clk *pck; + struct clk *pck, *phy; int ret; pck = clk_get(&pdev->dev, "dsip_clk"); @@ -328,18 +327,27 @@ static int sh_mipi_set_dot_clock(struct platform_device *pdev, goto sh_mipi_set_dot_clock_pck_err; } + phy = clk_get(&pdev->dev, "dsiphy_clk"); + if (IS_ERR(phy)) { + ret = PTR_ERR(phy); + goto sh_mipi_set_dot_clock_phy_err; + } + if (enable) { clk_set_rate(pck, clk_round_rate(pck, 24000000)); - __raw_writel(0x2a809010, DSI0PHYCR); + clk_set_rate(phy, clk_round_rate(pck, 510000000)); clk_enable(pck); + clk_enable(phy); } else { clk_disable(pck); + clk_disable(phy); } ret = 0; + clk_put(phy); +sh_mipi_set_dot_clock_phy_err: clk_put(pck); - sh_mipi_set_dot_clock_pck_err: return ret; } diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index afbead6a6e17..7727cca6136c 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -365,6 +365,114 @@ static struct clk div6_clks[DIV6_NR] = { dsi_parent, ARRAY_SIZE(dsi_parent), 12, 3), }; +/* DSI DIV */ +static unsigned long dsiphy_recalc(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + + /* FIXME */ + if (!(value & 0x000B8000)) + return clk->parent->rate; + + value &= 0x3f; + value += 1; + + if ((value < 12) || + (value > 33)) { + pr_err("DSIPHY has wrong value (%d)", value); + return 0; + } + + return clk->parent->rate / value; +} + +static long dsiphy_round_rate(struct clk *clk, unsigned long rate) +{ + return clk_rate_mult_range_round(clk, 12, 33, rate); +} + +static void dsiphy_disable(struct clk *clk) +{ + u32 value; + + value = __raw_readl(clk->mapping->base); + value &= ~0x000B8000; + + __raw_writel(value , clk->mapping->base); +} + +static int dsiphy_enable(struct clk *clk) +{ + u32 value; + int multi; + + value = __raw_readl(clk->mapping->base); + multi = (value & 0x3f) + 1; + + if ((multi < 12) || (multi > 33)) + return -EIO; + + __raw_writel(value | 0x000B8000, clk->mapping->base); + + return 0; +} + +static int dsiphy_set_rate(struct clk *clk, unsigned long rate) +{ + u32 value; + int idx; + + idx = rate / clk->parent->rate; + if ((idx < 12) || (idx > 33)) + return -EINVAL; + + idx += -1; + + value = __raw_readl(clk->mapping->base); + value = (value & ~0x3f) + idx; + + __raw_writel(value, clk->mapping->base); + + return 0; +} + +static struct clk_ops dsiphy_clk_ops = { + .recalc = dsiphy_recalc, + .round_rate = dsiphy_round_rate, + .set_rate = dsiphy_set_rate, + .enable = dsiphy_enable, + .disable = dsiphy_disable, +}; + +static struct clk_mapping dsi0phy_clk_mapping = { + .phys = DSI0PHYCR, + .len = 4, +}; + +static struct clk_mapping dsi1phy_clk_mapping = { + .phys = DSI1PHYCR, + .len = 4, +}; + +static struct clk dsi0phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI0P], /* late install */ + .mapping = &dsi0phy_clk_mapping, +}; + +static struct clk dsi1phy_clk = { + .ops = &dsiphy_clk_ops, + .parent = &div6_clks[DIV6_DSI1P], /* late install */ + .mapping = &dsi1phy_clk_mapping, +}; + +static struct clk *late_main_clks[] = { + &dsi0phy_clk, + &dsi1phy_clk, +}; + enum { MSTP001, MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100, MSTP219, @@ -429,6 +537,8 @@ static struct clk_lookup lookups[] = { CLKDEV_ICK_ID("dsit_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSIT]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.0", &div6_clks[DIV6_DSI0P]), CLKDEV_ICK_ID("dsip_clk", "sh-mipi-dsi.1", &div6_clks[DIV6_DSI1P]), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.0", &dsi0phy_clk), + CLKDEV_ICK_ID("dsiphy_clk", "sh-mipi-dsi.1", &dsi1phy_clk), /* MSTP32 clocks */ CLKDEV_DEV_ID("i2c-sh_mobile.2", &mstp_clks[MSTP001]), /* I2C2 */ @@ -504,6 +614,9 @@ void __init sh73a0_clock_init(void) if (!ret) ret = sh_clk_mstp32_register(mstp_clks, MSTP_NR); + for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++) + ret = clk_register(late_main_clks[k]); + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); if (!ret) -- GitLab From 4856f1946d1f404f6ff96857d5a895187d9caa8b Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Mon, 23 Jan 2012 15:52:03 +0100 Subject: [PATCH 0134/1359] ARM: mach-shmobile: add GPIO-to-IRQ translation to sh7372 This table is required to support the gpio_to_irq() translation. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Paul Mundt --- arch/arm/mach-shmobile/pfc-sh7372.c | 41 +++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm/mach-shmobile/pfc-sh7372.c b/arch/arm/mach-shmobile/pfc-sh7372.c index 1bd6585a6acf..336093f9210a 100644 --- a/arch/arm/mach-shmobile/pfc-sh7372.c +++ b/arch/arm/mach-shmobile/pfc-sh7372.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #define CPU_ALL_PORT(fn, pfx, sfx) \ @@ -1594,6 +1595,43 @@ static struct pinmux_data_reg pinmux_data_regs[] = { { }, }; +#define EXT_IRQ16L(n) evt2irq(0x200 + ((n) << 5)) +#define EXT_IRQ16H(n) evt2irq(0x3200 + (((n) - 16) << 5)) +static struct pinmux_irq pinmux_irqs[] = { + PINMUX_IRQ(EXT_IRQ16L(0), PORT6_FN0, PORT162_FN0), + PINMUX_IRQ(EXT_IRQ16L(1), PORT12_FN0), + PINMUX_IRQ(EXT_IRQ16L(2), PORT4_FN0, PORT5_FN0), + PINMUX_IRQ(EXT_IRQ16L(3), PORT8_FN0, PORT16_FN0), + PINMUX_IRQ(EXT_IRQ16L(4), PORT17_FN0, PORT163_FN0), + PINMUX_IRQ(EXT_IRQ16L(5), PORT18_FN0), + PINMUX_IRQ(EXT_IRQ16L(6), PORT39_FN0, PORT164_FN0), + PINMUX_IRQ(EXT_IRQ16L(7), PORT40_FN0, PORT167_FN0), + PINMUX_IRQ(EXT_IRQ16L(8), PORT41_FN0, PORT168_FN0), + PINMUX_IRQ(EXT_IRQ16L(9), PORT42_FN0, PORT169_FN0), + PINMUX_IRQ(EXT_IRQ16L(10), PORT65_FN0), + PINMUX_IRQ(EXT_IRQ16L(11), PORT67_FN0), + PINMUX_IRQ(EXT_IRQ16L(12), PORT80_FN0, PORT137_FN0), + PINMUX_IRQ(EXT_IRQ16L(13), PORT81_FN0, PORT145_FN0), + PINMUX_IRQ(EXT_IRQ16L(14), PORT82_FN0, PORT146_FN0), + PINMUX_IRQ(EXT_IRQ16L(15), PORT83_FN0, PORT147_FN0), + PINMUX_IRQ(EXT_IRQ16H(16), PORT84_FN0, PORT170_FN0), + PINMUX_IRQ(EXT_IRQ16H(17), PORT85_FN0), + PINMUX_IRQ(EXT_IRQ16H(18), PORT86_FN0), + PINMUX_IRQ(EXT_IRQ16H(19), PORT87_FN0), + PINMUX_IRQ(EXT_IRQ16H(20), PORT92_FN0), + PINMUX_IRQ(EXT_IRQ16H(21), PORT93_FN0), + PINMUX_IRQ(EXT_IRQ16H(22), PORT94_FN0), + PINMUX_IRQ(EXT_IRQ16H(23), PORT95_FN0), + PINMUX_IRQ(EXT_IRQ16H(24), PORT112_FN0), + PINMUX_IRQ(EXT_IRQ16H(25), PORT119_FN0), + PINMUX_IRQ(EXT_IRQ16H(26), PORT121_FN0, PORT172_FN0), + PINMUX_IRQ(EXT_IRQ16H(27), PORT122_FN0, PORT180_FN0), + PINMUX_IRQ(EXT_IRQ16H(28), PORT123_FN0, PORT181_FN0), + PINMUX_IRQ(EXT_IRQ16H(29), PORT129_FN0, PORT182_FN0), + PINMUX_IRQ(EXT_IRQ16H(30), PORT130_FN0, PORT183_FN0), + PINMUX_IRQ(EXT_IRQ16H(31), PORT138_FN0, PORT184_FN0), +}; + static struct pinmux_info sh7372_pinmux_info = { .name = "sh7372_pfc", .reserved_id = PINMUX_RESERVED, @@ -1614,6 +1652,9 @@ static struct pinmux_info sh7372_pinmux_info = { .gpio_data = pinmux_data, .gpio_data_size = ARRAY_SIZE(pinmux_data), + + .gpio_irq = pinmux_irqs, + .gpio_irq_size = ARRAY_SIZE(pinmux_irqs), }; void sh7372_pinmux_init(void) -- GitLab From 64dea57588f49736c2a7778292f3967c7984ab94 Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 19 Jan 2012 01:00:40 -0800 Subject: [PATCH 0135/1359] sh: clkfwk: bugfix: use clk_reparent() for div6 clocks Various problems will happen if clk parent was set up directly. it should use clk_reparent() Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/sh/clk/cpg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c index 45fee368b092..92d314a73f69 100644 --- a/drivers/sh/clk/cpg.c +++ b/drivers/sh/clk/cpg.c @@ -190,7 +190,7 @@ static int __init sh_clk_init_parent(struct clk *clk) return -EINVAL; } - clk->parent = clk->parent_table[val]; + clk_reparent(clk, clk->parent_table[val]); if (!clk->parent) { pr_err("sh_clk_init_parent: unable to set parent"); return -EINVAL; -- GitLab From f02432571ad52fcfb7e7c676d81f902a0351a8af Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Thu, 22 Dec 2011 14:03:12 +0000 Subject: [PATCH 0136/1359] ARM: tegra: dma: fix buildbreak for !CONFIG_TEGRA_SYSTEM_DMA There's no need to keep the DMA_REQ_SEL defines inside the ifdef. Fixes the following build break with CONFIG_TEGRA_SYSTEM_DMA=n: arch/arm/mach-tegra/devices.c:645: error: 'TEGRA_DMA_REQ_SEL_I2S_1' undeclared here (not in a function) arch/arm/mach-tegra/devices.c:663: error: 'TEGRA_DMA_REQ_SEL_I2S2_1' undeclared here (not in a function) arch/arm/mach-tegra/devices.c:663: error: initializer element is not constant arch/arm/mach-tegra/devices.c:663: error: (near initialization for 'i2s_resource2[1].start') arch/arm/mach-tegra/devices.c:664: error: initializer element is not constant arch/arm/mach-tegra/devices.c:664: error: (near initialization for 'i2s_resource2[1].end') Signed-off-by: Olof Johansson Acked-by: Stephen Warren --- arch/arm/mach-tegra/include/mach/dma.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/mach-tegra/include/mach/dma.h b/arch/arm/mach-tegra/include/mach/dma.h index d0132e8031a1..3c9339058bec 100644 --- a/arch/arm/mach-tegra/include/mach/dma.h +++ b/arch/arm/mach-tegra/include/mach/dma.h @@ -23,11 +23,6 @@ #include -#if defined(CONFIG_TEGRA_SYSTEM_DMA) - -struct tegra_dma_req; -struct tegra_dma_channel; - #define TEGRA_DMA_REQ_SEL_CNTR 0 #define TEGRA_DMA_REQ_SEL_I2S_2 1 #define TEGRA_DMA_REQ_SEL_I2S_1 2 @@ -56,6 +51,11 @@ struct tegra_dma_channel; #define TEGRA_DMA_REQ_SEL_OWR 25 #define TEGRA_DMA_REQ_SEL_INVALID 31 +#if defined(CONFIG_TEGRA_SYSTEM_DMA) + +struct tegra_dma_req; +struct tegra_dma_channel; + enum tegra_dma_mode { TEGRA_DMA_SHARED = 1, TEGRA_DMA_MODE_CONTINOUS = 2, -- GitLab From 68d8a781575d7be490f97eb2c403fb13b083da6a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 29 Dec 2011 06:32:29 +0200 Subject: [PATCH 0137/1359] usb: dwc3: ep0: tidy up Pending Request handling The way our code was written, we should never have a DWC3_EP_PENDING_REQUEST flag set out of a Data Phase and the code in __dwc3_gadget_ep0_queue() did not reflect that situation properly. Tidy up that case to avoid any possible mistakes when starting requests for IRQs which are long gone. Cc: stable@vger.kernel.org Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/ep0.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 2f51de57593a..74a3828cf950 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -149,20 +149,14 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, direction = !!(dep->flags & DWC3_EP0_DIR_IN); - if (dwc->ep0state == EP0_STATUS_PHASE) { - type = dwc->three_stage_setup - ? DWC3_TRBCTL_CONTROL_STATUS3 - : DWC3_TRBCTL_CONTROL_STATUS2; - } else if (dwc->ep0state == EP0_DATA_PHASE) { - type = DWC3_TRBCTL_CONTROL_DATA; - } else { - /* should never happen */ - WARN_ON(1); + if (dwc->ep0state != EP0_DATA_PHASE) { + dev_WARN(dwc->dev, "Unexpected pending request\n"); return 0; } ret = dwc3_ep0_start_trans(dwc, direction, - req->request.dma, req->request.length, type); + req->request.dma, req->request.length, + DWC3_TRBCTL_CONTROL_DATA); dep->flags &= ~(DWC3_EP_PENDING_REQUEST | DWC3_EP0_DIR_IN); } else if (dwc->delayed_status) { -- GitLab From c1084a56da255ef5385c0f587e16fdc225a5460f Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Wed, 21 Dec 2011 10:19:38 +0200 Subject: [PATCH 0138/1359] usb: otg: kill langwell_otg driver The way this driver was added by f0ae849 (usb: Add Intel Langwell USB OTG Transceiver Driver) never even compiled together with langwell_udc, and that's the only way for it to be useful. Signed-off-by: Alexander Shishkin Cc: stable@vger.kernel.org # v2.6.31+ Cc: Heikki Krogerus Cc: Greg Kroah-Hartman Cc: Alan Cox Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi --- drivers/usb/otg/Kconfig | 14 - drivers/usb/otg/Makefile | 1 - drivers/usb/otg/langwell_otg.c | 2347 ------------------------------ include/linux/usb/langwell_otg.h | 139 -- 4 files changed, 2501 deletions(-) delete mode 100644 drivers/usb/otg/langwell_otg.c delete mode 100644 include/linux/usb/langwell_otg.h diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 2a25955881fc..9105c285f594 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -86,20 +86,6 @@ config NOP_USB_XCEIV built-in with usb ip or which are autonomous and doesn't require any phy programming such as ISP1x04 etc. -config USB_LANGWELL_OTG - tristate "Intel Langwell USB OTG dual-role support" - depends on USB && PCI && INTEL_SCU_IPC - select USB_OTG - select USB_OTG_UTILS - help - Say Y here if you want to build Intel Langwell USB OTG - transciever driver in kernel. This driver implements role - switch between EHCI host driver and Langwell USB OTG - client driver. - - To compile this driver as a module, choose M here: the - module will be called langwell_otg. - config USB_MSM_OTG tristate "OTG support for Qualcomm on-chip USB controller" depends on (USB || USB_GADGET) && ARCH_MSM diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile index b2c5a9598637..41aa5098b139 100644 --- a/drivers/usb/otg/Makefile +++ b/drivers/usb/otg/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o obj-$(CONFIG_TWL6030_USB) += twl6030-usb.o -obj-$(CONFIG_USB_LANGWELL_OTG) += langwell_otg.o obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o obj-$(CONFIG_USB_ULPI) += ulpi.o obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o diff --git a/drivers/usb/otg/langwell_otg.c b/drivers/usb/otg/langwell_otg.c deleted file mode 100644 index f08f784086f7..000000000000 --- a/drivers/usb/otg/langwell_otg.c +++ /dev/null @@ -1,2347 +0,0 @@ -/* - * Intel Langwell USB OTG transceiver driver - * Copyright (C) 2008 - 2010, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ -/* This driver helps to switch Langwell OTG controller function between host - * and peripheral. It works with EHCI driver and Langwell client controller - * driver together. - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define DRIVER_DESC "Intel Langwell USB OTG transceiver driver" -#define DRIVER_VERSION "July 10, 2010" - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_AUTHOR("Henry Yuan , Hao Wu "); -MODULE_VERSION(DRIVER_VERSION); -MODULE_LICENSE("GPL"); - -static const char driver_name[] = "langwell_otg"; - -static int langwell_otg_probe(struct pci_dev *pdev, - const struct pci_device_id *id); -static void langwell_otg_remove(struct pci_dev *pdev); -static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message); -static int langwell_otg_resume(struct pci_dev *pdev); - -static int langwell_otg_set_host(struct otg_transceiver *otg, - struct usb_bus *host); -static int langwell_otg_set_peripheral(struct otg_transceiver *otg, - struct usb_gadget *gadget); -static int langwell_otg_start_srp(struct otg_transceiver *otg); - -static const struct pci_device_id pci_ids[] = {{ - .class = ((PCI_CLASS_SERIAL_USB << 8) | 0xfe), - .class_mask = ~0, - .vendor = 0x8086, - .device = 0x0811, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, -}, { /* end: all zeroes */ } -}; - -static struct pci_driver otg_pci_driver = { - .name = (char *) driver_name, - .id_table = pci_ids, - - .probe = langwell_otg_probe, - .remove = langwell_otg_remove, - - .suspend = langwell_otg_suspend, - .resume = langwell_otg_resume, -}; - -/* HSM timers */ -static inline struct langwell_otg_timer *otg_timer_initializer -(void (*function)(unsigned long), unsigned long expires, unsigned long data) -{ - struct langwell_otg_timer *timer; - timer = kmalloc(sizeof(struct langwell_otg_timer), GFP_KERNEL); - if (timer == NULL) - return timer; - - timer->function = function; - timer->expires = expires; - timer->data = data; - return timer; -} - -static struct langwell_otg_timer *a_wait_vrise_tmr, *a_aidl_bdis_tmr, - *b_se0_srp_tmr, *b_srp_init_tmr; - -static struct list_head active_timers; - -static struct langwell_otg *the_transceiver; - -/* host/client notify transceiver when event affects HNP state */ -void langwell_update_transceiver(void) -{ - struct langwell_otg *lnw = the_transceiver; - - dev_dbg(lnw->dev, "transceiver is updated\n"); - - if (!lnw->qwork) - return ; - - queue_work(lnw->qwork, &lnw->work); -} -EXPORT_SYMBOL(langwell_update_transceiver); - -static int langwell_otg_set_host(struct otg_transceiver *otg, - struct usb_bus *host) -{ - otg->host = host; - - return 0; -} - -static int langwell_otg_set_peripheral(struct otg_transceiver *otg, - struct usb_gadget *gadget) -{ - otg->gadget = gadget; - - return 0; -} - -static int langwell_otg_set_power(struct otg_transceiver *otg, - unsigned mA) -{ - return 0; -} - -/* A-device drives vbus, controlled through IPC commands */ -static int langwell_otg_set_vbus(struct otg_transceiver *otg, bool enabled) -{ - struct langwell_otg *lnw = the_transceiver; - u8 sub_id; - - dev_dbg(lnw->dev, "%s <--- %s\n", __func__, enabled ? "on" : "off"); - - if (enabled) - sub_id = 0x8; /* Turn on the VBus */ - else - sub_id = 0x9; /* Turn off the VBus */ - - if (intel_scu_ipc_simple_command(0xef, sub_id)) { - dev_dbg(lnw->dev, "Failed to set Vbus via IPC commands\n"); - return -EBUSY; - } - - dev_dbg(lnw->dev, "%s --->\n", __func__); - - return 0; -} - -/* charge vbus or discharge vbus through a resistor to ground */ -static void langwell_otg_chrg_vbus(int on) -{ - struct langwell_otg *lnw = the_transceiver; - u32 val; - - val = readl(lnw->iotg.base + CI_OTGSC); - - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VC, - lnw->iotg.base + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_VD, - lnw->iotg.base + CI_OTGSC); -} - -/* Start SRP */ -static int langwell_otg_start_srp(struct otg_transceiver *otg) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s --->\n", __func__); - - val = readl(iotg->base + CI_OTGSC); - - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HADP, - iotg->base + CI_OTGSC); - - /* Check if the data plus is finished or not */ - msleep(8); - val = readl(iotg->base + CI_OTGSC); - if (val & (OTGSC_HADP | OTGSC_DP)) - dev_dbg(lnw->dev, "DataLine SRP Error\n"); - - /* Disable interrupt - b_sess_vld */ - val = readl(iotg->base + CI_OTGSC); - val &= (~(OTGSC_BSVIE | OTGSC_BSEIE)); - writel(val, iotg->base + CI_OTGSC); - - /* Start VBus SRP, drive vbus to generate VBus pulse */ - iotg->otg.set_vbus(&iotg->otg, true); - msleep(15); - iotg->otg.set_vbus(&iotg->otg, false); - - /* Enable interrupt - b_sess_vld*/ - val = readl(iotg->base + CI_OTGSC); - dev_dbg(lnw->dev, "after VBUS pulse otgsc = %x\n", val); - - val |= (OTGSC_BSVIE | OTGSC_BSEIE); - writel(val, iotg->base + CI_OTGSC); - - /* If Vbus is valid, then update the hsm */ - if (val & OTGSC_BSV) { - dev_dbg(lnw->dev, "no b_sess_vld interrupt\n"); - - lnw->iotg.hsm.b_sess_vld = 1; - langwell_update_transceiver(); - } - - dev_dbg(lnw->dev, "%s <---\n", __func__); - return 0; -} - -/* stop SOF via bus_suspend */ -static void langwell_otg_loc_sof(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct usb_hcd *hcd; - int err; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "suspend" : "resume"); - - hcd = bus_to_hcd(lnw->iotg.otg.host); - if (on) - err = hcd->driver->bus_resume(hcd); - else - err = hcd->driver->bus_suspend(hcd); - - if (err) - dev_dbg(lnw->dev, "Fail to resume/suspend USB bus - %d\n", err); - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -static int langwell_otg_check_otgsc(void) -{ - struct langwell_otg *lnw = the_transceiver; - u32 otgsc, usbcfg; - - dev_dbg(lnw->dev, "check sync OTGSC and USBCFG registers\n"); - - otgsc = readl(lnw->iotg.base + CI_OTGSC); - usbcfg = readl(lnw->usbcfg); - - dev_dbg(lnw->dev, "OTGSC = %08x, USBCFG = %08x\n", - otgsc, usbcfg); - dev_dbg(lnw->dev, "OTGSC_AVV = %d\n", !!(otgsc & OTGSC_AVV)); - dev_dbg(lnw->dev, "USBCFG.VBUSVAL = %d\n", - !!(usbcfg & USBCFG_VBUSVAL)); - dev_dbg(lnw->dev, "OTGSC_ASV = %d\n", !!(otgsc & OTGSC_ASV)); - dev_dbg(lnw->dev, "USBCFG.AVALID = %d\n", - !!(usbcfg & USBCFG_AVALID)); - dev_dbg(lnw->dev, "OTGSC_BSV = %d\n", !!(otgsc & OTGSC_BSV)); - dev_dbg(lnw->dev, "USBCFG.BVALID = %d\n", - !!(usbcfg & USBCFG_BVALID)); - dev_dbg(lnw->dev, "OTGSC_BSE = %d\n", !!(otgsc & OTGSC_BSE)); - dev_dbg(lnw->dev, "USBCFG.SESEND = %d\n", - !!(usbcfg & USBCFG_SESEND)); - - /* Check USBCFG VBusValid/AValid/BValid/SessEnd */ - if (!!(otgsc & OTGSC_AVV) ^ !!(usbcfg & USBCFG_VBUSVAL)) { - dev_dbg(lnw->dev, "OTGSC.AVV != USBCFG.VBUSVAL\n"); - goto err; - } - if (!!(otgsc & OTGSC_ASV) ^ !!(usbcfg & USBCFG_AVALID)) { - dev_dbg(lnw->dev, "OTGSC.ASV != USBCFG.AVALID\n"); - goto err; - } - if (!!(otgsc & OTGSC_BSV) ^ !!(usbcfg & USBCFG_BVALID)) { - dev_dbg(lnw->dev, "OTGSC.BSV != USBCFG.BVALID\n"); - goto err; - } - if (!!(otgsc & OTGSC_BSE) ^ !!(usbcfg & USBCFG_SESEND)) { - dev_dbg(lnw->dev, "OTGSC.BSE != USBCFG.SESSEN\n"); - goto err; - } - - dev_dbg(lnw->dev, "OTGSC and USBCFG are synced\n"); - - return 0; - -err: - dev_warn(lnw->dev, "OTGSC isn't equal to USBCFG\n"); - return -EPIPE; -} - - -static void langwell_otg_phy_low_power(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u8 val, phcd; - int retval; - - dev_dbg(lnw->dev, "%s ---> %s mode\n", - __func__, on ? "Low power" : "Normal"); - - phcd = 0x40; - - val = readb(iotg->base + CI_HOSTPC1 + 2); - - if (on) { - /* Due to hardware issue, after set PHCD, sync will failed - * between USBCFG and OTGSC, so before set PHCD, check if - * sync is in process now. If the answer is "yes", then do - * not touch PHCD bit */ - retval = langwell_otg_check_otgsc(); - if (retval) { - dev_dbg(lnw->dev, "Skip PHCD programming..\n"); - return ; - } - - writeb(val | phcd, iotg->base + CI_HOSTPC1 + 2); - } else - writeb(val & ~phcd, iotg->base + CI_HOSTPC1 + 2); - - dev_dbg(lnw->dev, "%s <--- done\n", __func__); -} - -/* After drv vbus, add 5 ms delay to set PHCD */ -static void langwell_otg_phy_low_power_wait(int on) -{ - struct langwell_otg *lnw = the_transceiver; - - dev_dbg(lnw->dev, "add 5ms delay before programing PHCD\n"); - - mdelay(5); - langwell_otg_phy_low_power(on); -} - -/* Enable/Disable OTG interrupt */ -static void langwell_otg_intr(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off"); - - val = readl(iotg->base + CI_OTGSC); - - /* OTGSC_INT_MASK doesn't contains 1msInt */ - if (on) { - val = val | (OTGSC_INT_MASK); - writel(val, iotg->base + CI_OTGSC); - } else { - val = val & ~(OTGSC_INT_MASK); - writel(val, iotg->base + CI_OTGSC); - } - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -/* set HAAR: Hardware Assist Auto-Reset */ -static void langwell_otg_HAAR(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off"); - - val = readl(iotg->base + CI_OTGSC); - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HAAR, - iotg->base + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HAAR, - iotg->base + CI_OTGSC); - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -/* set HABA: Hardware Assist B-Disconnect to A-Connect */ -static void langwell_otg_HABA(int on) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val; - - dev_dbg(lnw->dev, "%s ---> %s\n", __func__, on ? "on" : "off"); - - val = readl(iotg->base + CI_OTGSC); - if (on) - writel((val & ~OTGSC_INTSTS_MASK) | OTGSC_HABA, - iotg->base + CI_OTGSC); - else - writel((val & ~OTGSC_INTSTS_MASK) & ~OTGSC_HABA, - iotg->base + CI_OTGSC); - - dev_dbg(lnw->dev, "%s <---\n", __func__); -} - -static int langwell_otg_check_se0_srp(int on) -{ - struct langwell_otg *lnw = the_transceiver; - int delay_time = TB_SE0_SRP * 10; - u32 val; - - dev_dbg(lnw->dev, "%s --->\n", __func__); - - do { - udelay(100); - if (!delay_time--) - break; - val = readl(lnw->iotg.base + CI_PORTSC1); - val &= PORTSC_LS; - } while (!val); - - dev_dbg(lnw->dev, "%s <---\n", __func__); - return val; -} - -/* The timeout callback function to set time out bit */ -static void set_tmout(unsigned long indicator) -{ - *(int *)indicator = 1; -} - -void langwell_otg_nsf_msg(unsigned long indicator) -{ - struct langwell_otg *lnw = the_transceiver; - - switch (indicator) { - case 2: - case 4: - case 6: - case 7: - dev_warn(lnw->dev, - "OTG:NSF-%lu - deivce not responding\n", indicator); - break; - case 3: - dev_warn(lnw->dev, - "OTG:NSF-%lu - deivce not supported\n", indicator); - break; - default: - dev_warn(lnw->dev, "Do not have this kind of NSF\n"); - break; - } -} - -/* Initialize timers */ -static int langwell_otg_init_timers(struct otg_hsm *hsm) -{ - /* HSM used timers */ - a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE, - (unsigned long)&hsm->a_wait_vrise_tmout); - if (a_wait_vrise_tmr == NULL) - return -ENOMEM; - a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS, - (unsigned long)&hsm->a_aidl_bdis_tmout); - if (a_aidl_bdis_tmr == NULL) - return -ENOMEM; - b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP, - (unsigned long)&hsm->b_se0_srp); - if (b_se0_srp_tmr == NULL) - return -ENOMEM; - b_srp_init_tmr = otg_timer_initializer(&set_tmout, TB_SRP_INIT, - (unsigned long)&hsm->b_srp_init_tmout); - if (b_srp_init_tmr == NULL) - return -ENOMEM; - - return 0; -} - -/* Free timers */ -static void langwell_otg_free_timers(void) -{ - kfree(a_wait_vrise_tmr); - kfree(a_aidl_bdis_tmr); - kfree(b_se0_srp_tmr); - kfree(b_srp_init_tmr); -} - -/* The timeout callback function to set time out bit */ -static void langwell_otg_timer_fn(unsigned long indicator) -{ - struct langwell_otg *lnw = the_transceiver; - - *(int *)indicator = 1; - - dev_dbg(lnw->dev, "kernel timer - timeout\n"); - - langwell_update_transceiver(); -} - -/* kernel timer used instead of HW based interrupt */ -static void langwell_otg_add_ktimer(enum langwell_otg_timer_type timers) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - unsigned long j = jiffies; - unsigned long data, time; - - switch (timers) { - case TA_WAIT_VRISE_TMR: - iotg->hsm.a_wait_vrise_tmout = 0; - data = (unsigned long)&iotg->hsm.a_wait_vrise_tmout; - time = TA_WAIT_VRISE; - break; - case TA_WAIT_BCON_TMR: - iotg->hsm.a_wait_bcon_tmout = 0; - data = (unsigned long)&iotg->hsm.a_wait_bcon_tmout; - time = TA_WAIT_BCON; - break; - case TA_AIDL_BDIS_TMR: - iotg->hsm.a_aidl_bdis_tmout = 0; - data = (unsigned long)&iotg->hsm.a_aidl_bdis_tmout; - time = TA_AIDL_BDIS; - break; - case TB_ASE0_BRST_TMR: - iotg->hsm.b_ase0_brst_tmout = 0; - data = (unsigned long)&iotg->hsm.b_ase0_brst_tmout; - time = TB_ASE0_BRST; - break; - case TB_SRP_INIT_TMR: - iotg->hsm.b_srp_init_tmout = 0; - data = (unsigned long)&iotg->hsm.b_srp_init_tmout; - time = TB_SRP_INIT; - break; - case TB_SRP_FAIL_TMR: - iotg->hsm.b_srp_fail_tmout = 0; - data = (unsigned long)&iotg->hsm.b_srp_fail_tmout; - time = TB_SRP_FAIL; - break; - case TB_BUS_SUSPEND_TMR: - iotg->hsm.b_bus_suspend_tmout = 0; - data = (unsigned long)&iotg->hsm.b_bus_suspend_tmout; - time = TB_BUS_SUSPEND; - break; - default: - dev_dbg(lnw->dev, "unknown timer, cannot enable it\n"); - return; - } - - lnw->hsm_timer.data = data; - lnw->hsm_timer.function = langwell_otg_timer_fn; - lnw->hsm_timer.expires = j + time * HZ / 1000; /* milliseconds */ - - add_timer(&lnw->hsm_timer); - - dev_dbg(lnw->dev, "add timer successfully\n"); -} - -/* Add timer to timer list */ -static void langwell_otg_add_timer(void *gtimer) -{ - struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer; - struct langwell_otg_timer *tmp_timer; - struct intel_mid_otg_xceiv *iotg = &the_transceiver->iotg; - u32 val32; - - /* Check if the timer is already in the active list, - * if so update timer count - */ - list_for_each_entry(tmp_timer, &active_timers, list) - if (tmp_timer == timer) { - timer->count = timer->expires; - return; - } - timer->count = timer->expires; - - if (list_empty(&active_timers)) { - val32 = readl(iotg->base + CI_OTGSC); - writel(val32 | OTGSC_1MSE, iotg->base + CI_OTGSC); - } - - list_add_tail(&timer->list, &active_timers); -} - -/* Remove timer from the timer list; clear timeout status */ -static void langwell_otg_del_timer(void *gtimer) -{ - struct langwell_otg *lnw = the_transceiver; - struct langwell_otg_timer *timer = (struct langwell_otg_timer *)gtimer; - struct langwell_otg_timer *tmp_timer, *del_tmp; - u32 val32; - - list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) - if (tmp_timer == timer) - list_del(&timer->list); - - if (list_empty(&active_timers)) { - val32 = readl(lnw->iotg.base + CI_OTGSC); - writel(val32 & ~OTGSC_1MSE, lnw->iotg.base + CI_OTGSC); - } -} - -/* Reduce timer count by 1, and find timeout conditions.*/ -static int langwell_otg_tick_timer(u32 *int_sts) -{ - struct langwell_otg *lnw = the_transceiver; - struct langwell_otg_timer *tmp_timer, *del_tmp; - int expired = 0; - - list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) { - tmp_timer->count--; - /* check if timer expires */ - if (!tmp_timer->count) { - list_del(&tmp_timer->list); - tmp_timer->function(tmp_timer->data); - expired = 1; - } - } - - if (list_empty(&active_timers)) { - dev_dbg(lnw->dev, "tick timer: disable 1ms int\n"); - *int_sts = *int_sts & ~OTGSC_1MSE; - } - return expired; -} - -static void reset_otg(void) -{ - struct langwell_otg *lnw = the_transceiver; - int delay_time = 1000; - u32 val; - - dev_dbg(lnw->dev, "reseting OTG controller ...\n"); - val = readl(lnw->iotg.base + CI_USBCMD); - writel(val | USBCMD_RST, lnw->iotg.base + CI_USBCMD); - do { - udelay(100); - if (!delay_time--) - dev_dbg(lnw->dev, "reset timeout\n"); - val = readl(lnw->iotg.base + CI_USBCMD); - val &= USBCMD_RST; - } while (val != 0); - dev_dbg(lnw->dev, "reset done.\n"); -} - -static void set_host_mode(void) -{ - struct langwell_otg *lnw = the_transceiver; - u32 val; - - reset_otg(); - val = readl(lnw->iotg.base + CI_USBMODE); - val = (val & (~USBMODE_CM)) | USBMODE_HOST; - writel(val, lnw->iotg.base + CI_USBMODE); -} - -static void set_client_mode(void) -{ - struct langwell_otg *lnw = the_transceiver; - u32 val; - - reset_otg(); - val = readl(lnw->iotg.base + CI_USBMODE); - val = (val & (~USBMODE_CM)) | USBMODE_DEVICE; - writel(val, lnw->iotg.base + CI_USBMODE); -} - -static void init_hsm(void) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val32; - - /* read OTGSC after reset */ - val32 = readl(lnw->iotg.base + CI_OTGSC); - dev_dbg(lnw->dev, "%s: OTGSC init value = 0x%x\n", __func__, val32); - - /* set init state */ - if (val32 & OTGSC_ID) { - iotg->hsm.id = 1; - iotg->otg.default_a = 0; - set_client_mode(); - iotg->otg.state = OTG_STATE_B_IDLE; - } else { - iotg->hsm.id = 0; - iotg->otg.default_a = 1; - set_host_mode(); - iotg->otg.state = OTG_STATE_A_IDLE; - } - - /* set session indicator */ - if (val32 & OTGSC_BSE) - iotg->hsm.b_sess_end = 1; - if (val32 & OTGSC_BSV) - iotg->hsm.b_sess_vld = 1; - if (val32 & OTGSC_ASV) - iotg->hsm.a_sess_vld = 1; - if (val32 & OTGSC_AVV) - iotg->hsm.a_vbus_vld = 1; - - /* defautly power the bus */ - iotg->hsm.a_bus_req = 1; - iotg->hsm.a_bus_drop = 0; - /* defautly don't request bus as B device */ - iotg->hsm.b_bus_req = 0; - /* no system error */ - iotg->hsm.a_clr_err = 0; - - langwell_otg_phy_low_power_wait(1); -} - -static void update_hsm(void) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 val32; - - /* read OTGSC */ - val32 = readl(lnw->iotg.base + CI_OTGSC); - dev_dbg(lnw->dev, "%s: OTGSC value = 0x%x\n", __func__, val32); - - iotg->hsm.id = !!(val32 & OTGSC_ID); - iotg->hsm.b_sess_end = !!(val32 & OTGSC_BSE); - iotg->hsm.b_sess_vld = !!(val32 & OTGSC_BSV); - iotg->hsm.a_sess_vld = !!(val32 & OTGSC_ASV); - iotg->hsm.a_vbus_vld = !!(val32 & OTGSC_AVV); -} - -static irqreturn_t otg_dummy_irq(int irq, void *_dev) -{ - struct langwell_otg *lnw = the_transceiver; - void __iomem *reg_base = _dev; - u32 val; - u32 int_mask = 0; - - val = readl(reg_base + CI_USBMODE); - if ((val & USBMODE_CM) != USBMODE_DEVICE) - return IRQ_NONE; - - val = readl(reg_base + CI_USBSTS); - int_mask = val & INTR_DUMMY_MASK; - - if (int_mask == 0) - return IRQ_NONE; - - /* clear hsm.b_conn here since host driver can't detect it - * otg_dummy_irq called means B-disconnect happened. - */ - if (lnw->iotg.hsm.b_conn) { - lnw->iotg.hsm.b_conn = 0; - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - } - - /* Clear interrupts */ - writel(int_mask, reg_base + CI_USBSTS); - return IRQ_HANDLED; -} - -static irqreturn_t otg_irq(int irq, void *_dev) -{ - struct langwell_otg *lnw = _dev; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - u32 int_sts, int_en; - u32 int_mask = 0; - int flag = 0; - - int_sts = readl(lnw->iotg.base + CI_OTGSC); - int_en = (int_sts & OTGSC_INTEN_MASK) >> 8; - int_mask = int_sts & int_en; - if (int_mask == 0) - return IRQ_NONE; - - if (int_mask & OTGSC_IDIS) { - dev_dbg(lnw->dev, "%s: id change int\n", __func__); - iotg->hsm.id = (int_sts & OTGSC_ID) ? 1 : 0; - dev_dbg(lnw->dev, "id = %d\n", iotg->hsm.id); - flag = 1; - } - if (int_mask & OTGSC_DPIS) { - dev_dbg(lnw->dev, "%s: data pulse int\n", __func__); - iotg->hsm.a_srp_det = (int_sts & OTGSC_DPS) ? 1 : 0; - dev_dbg(lnw->dev, "data pulse = %d\n", iotg->hsm.a_srp_det); - flag = 1; - } - if (int_mask & OTGSC_BSEIS) { - dev_dbg(lnw->dev, "%s: b session end int\n", __func__); - iotg->hsm.b_sess_end = (int_sts & OTGSC_BSE) ? 1 : 0; - dev_dbg(lnw->dev, "b_sess_end = %d\n", iotg->hsm.b_sess_end); - flag = 1; - } - if (int_mask & OTGSC_BSVIS) { - dev_dbg(lnw->dev, "%s: b session valid int\n", __func__); - iotg->hsm.b_sess_vld = (int_sts & OTGSC_BSV) ? 1 : 0; - dev_dbg(lnw->dev, "b_sess_vld = %d\n", iotg->hsm.b_sess_end); - flag = 1; - } - if (int_mask & OTGSC_ASVIS) { - dev_dbg(lnw->dev, "%s: a session valid int\n", __func__); - iotg->hsm.a_sess_vld = (int_sts & OTGSC_ASV) ? 1 : 0; - dev_dbg(lnw->dev, "a_sess_vld = %d\n", iotg->hsm.a_sess_vld); - flag = 1; - } - if (int_mask & OTGSC_AVVIS) { - dev_dbg(lnw->dev, "%s: a vbus valid int\n", __func__); - iotg->hsm.a_vbus_vld = (int_sts & OTGSC_AVV) ? 1 : 0; - dev_dbg(lnw->dev, "a_vbus_vld = %d\n", iotg->hsm.a_vbus_vld); - flag = 1; - } - - if (int_mask & OTGSC_1MSS) { - /* need to schedule otg_work if any timer is expired */ - if (langwell_otg_tick_timer(&int_sts)) - flag = 1; - } - - writel((int_sts & ~OTGSC_INTSTS_MASK) | int_mask, - lnw->iotg.base + CI_OTGSC); - if (flag) - langwell_update_transceiver(); - - return IRQ_HANDLED; -} - -static int langwell_otg_iotg_notify(struct notifier_block *nb, - unsigned long action, void *data) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = data; - int flag = 0; - - if (iotg == NULL) - return NOTIFY_BAD; - - if (lnw == NULL) - return NOTIFY_BAD; - - switch (action) { - case MID_OTG_NOTIFY_CONNECT: - dev_dbg(lnw->dev, "Lnw OTG Notify Connect Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.b_conn = 1; - else - iotg->hsm.a_conn = 1; - flag = 1; - break; - case MID_OTG_NOTIFY_DISCONN: - dev_dbg(lnw->dev, "Lnw OTG Notify Disconnect Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.b_conn = 0; - else - iotg->hsm.a_conn = 0; - flag = 1; - break; - case MID_OTG_NOTIFY_HSUSPEND: - dev_dbg(lnw->dev, "Lnw OTG Notify Host Bus suspend Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.a_suspend_req = 1; - else - iotg->hsm.b_bus_req = 0; - flag = 1; - break; - case MID_OTG_NOTIFY_HRESUME: - dev_dbg(lnw->dev, "Lnw OTG Notify Host Bus resume Event\n"); - if (iotg->otg.default_a == 1) - iotg->hsm.b_bus_resume = 1; - flag = 1; - break; - case MID_OTG_NOTIFY_CSUSPEND: - dev_dbg(lnw->dev, "Lnw OTG Notify Client Bus suspend Event\n"); - if (iotg->otg.default_a == 1) { - if (iotg->hsm.b_bus_suspend_vld == 2) { - iotg->hsm.b_bus_suspend = 1; - iotg->hsm.b_bus_suspend_vld = 0; - flag = 1; - } else { - iotg->hsm.b_bus_suspend_vld++; - flag = 0; - } - } else { - if (iotg->hsm.a_bus_suspend == 0) { - iotg->hsm.a_bus_suspend = 1; - flag = 1; - } - } - break; - case MID_OTG_NOTIFY_CRESUME: - dev_dbg(lnw->dev, "Lnw OTG Notify Client Bus resume Event\n"); - if (iotg->otg.default_a == 0) - iotg->hsm.a_bus_suspend = 0; - flag = 0; - break; - case MID_OTG_NOTIFY_HOSTADD: - dev_dbg(lnw->dev, "Lnw OTG Nofity Host Driver Add\n"); - flag = 1; - break; - case MID_OTG_NOTIFY_HOSTREMOVE: - dev_dbg(lnw->dev, "Lnw OTG Nofity Host Driver remove\n"); - flag = 1; - break; - case MID_OTG_NOTIFY_CLIENTADD: - dev_dbg(lnw->dev, "Lnw OTG Nofity Client Driver Add\n"); - flag = 1; - break; - case MID_OTG_NOTIFY_CLIENTREMOVE: - dev_dbg(lnw->dev, "Lnw OTG Nofity Client Driver remove\n"); - flag = 1; - break; - default: - dev_dbg(lnw->dev, "Lnw OTG Nofity unknown notify message\n"); - return NOTIFY_DONE; - } - - if (flag) - langwell_update_transceiver(); - - return NOTIFY_OK; -} - -static void langwell_otg_work(struct work_struct *work) -{ - struct langwell_otg *lnw; - struct intel_mid_otg_xceiv *iotg; - int retval; - struct pci_dev *pdev; - - lnw = container_of(work, struct langwell_otg, work); - iotg = &lnw->iotg; - pdev = to_pci_dev(lnw->dev); - - dev_dbg(lnw->dev, "%s: old state = %s\n", __func__, - otg_state_string(iotg->otg.state)); - - switch (iotg->otg.state) { - case OTG_STATE_UNDEFINED: - case OTG_STATE_B_IDLE: - if (!iotg->hsm.id) { - langwell_otg_del_timer(b_srp_init_tmr); - del_timer_sync(&lnw->hsm_timer); - - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - set_host_mode(); - langwell_otg_phy_low_power(1); - - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.b_sess_vld) { - langwell_otg_del_timer(b_srp_init_tmr); - del_timer_sync(&lnw->hsm_timer); - iotg->hsm.b_sess_end = 0; - iotg->hsm.a_bus_suspend = 0; - langwell_otg_chrg_vbus(0); - - if (lnw->iotg.start_peripheral) { - lnw->iotg.start_peripheral(&lnw->iotg); - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } else - dev_dbg(lnw->dev, "client driver not loaded\n"); - - } else if (iotg->hsm.b_srp_init_tmout) { - iotg->hsm.b_srp_init_tmout = 0; - dev_warn(lnw->dev, "SRP init timeout\n"); - } else if (iotg->hsm.b_srp_fail_tmout) { - iotg->hsm.b_srp_fail_tmout = 0; - iotg->hsm.b_bus_req = 0; - - /* No silence failure */ - langwell_otg_nsf_msg(6); - } else if (iotg->hsm.b_bus_req && iotg->hsm.b_sess_end) { - del_timer_sync(&lnw->hsm_timer); - /* workaround for b_se0_srp detection */ - retval = langwell_otg_check_se0_srp(0); - if (retval) { - iotg->hsm.b_bus_req = 0; - dev_dbg(lnw->dev, "LS isn't SE0, try later\n"); - } else { - /* clear the PHCD before start srp */ - langwell_otg_phy_low_power(0); - - /* Start SRP */ - langwell_otg_add_timer(b_srp_init_tmr); - iotg->otg.start_srp(&iotg->otg); - langwell_otg_del_timer(b_srp_init_tmr); - langwell_otg_add_ktimer(TB_SRP_FAIL_TMR); - - /* reset PHY low power mode here */ - langwell_otg_phy_low_power_wait(1); - } - } - break; - case OTG_STATE_B_SRP_INIT: - if (!iotg->hsm.id) { - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_chrg_vbus(0); - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.b_sess_vld) { - langwell_otg_chrg_vbus(0); - if (lnw->iotg.start_peripheral) { - lnw->iotg.start_peripheral(&lnw->iotg); - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } else - dev_dbg(lnw->dev, "client driver not loaded\n"); - } - break; - case OTG_STATE_B_PERIPHERAL: - if (!iotg->hsm.id) { - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.b_sess_vld) { - iotg->hsm.b_hnp_enable = 0; - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - iotg->otg.state = OTG_STATE_B_IDLE; - } else if (iotg->hsm.b_bus_req && iotg->otg.gadget && - iotg->otg.gadget->b_hnp_enable && - iotg->hsm.a_bus_suspend) { - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - langwell_otg_HAAR(1); - iotg->hsm.a_conn = 0; - - if (lnw->iotg.start_host) { - lnw->iotg.start_host(&lnw->iotg); - iotg->otg.state = OTG_STATE_B_WAIT_ACON; - } else - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - - iotg->hsm.a_bus_resume = 0; - langwell_otg_add_ktimer(TB_ASE0_BRST_TMR); - } - break; - - case OTG_STATE_B_WAIT_ACON: - if (!iotg->hsm.id) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - - langwell_otg_HAAR(0); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.b_sess_vld) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->hsm.b_hnp_enable = 0; - iotg->hsm.b_bus_req = 0; - - langwell_otg_chrg_vbus(0); - langwell_otg_HAAR(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - } else if (iotg->hsm.a_conn) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - langwell_otg_HAAR(0); - iotg->otg.state = OTG_STATE_B_HOST; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_resume || - iotg->hsm.b_ase0_brst_tmout) { - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - langwell_otg_HAAR(0); - langwell_otg_nsf_msg(7); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - iotg->hsm.a_bus_suspend = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.start_peripheral) - lnw->iotg.start_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver not loaded.\n"); - - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } - break; - - case OTG_STATE_B_HOST: - if (!iotg->hsm.id) { - iotg->otg.default_a = 1; - iotg->hsm.a_srp_det = 0; - - langwell_otg_chrg_vbus(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.b_sess_vld) { - iotg->hsm.b_hnp_enable = 0; - iotg->hsm.b_bus_req = 0; - - langwell_otg_chrg_vbus(0); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - } else if ((!iotg->hsm.b_bus_req) || - (!iotg->hsm.a_conn)) { - iotg->hsm.b_bus_req = 0; - langwell_otg_loc_sof(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - iotg->hsm.a_bus_suspend = 0; - - if (lnw->iotg.start_peripheral) - lnw->iotg.start_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver not loaded.\n"); - - iotg->otg.state = OTG_STATE_B_PERIPHERAL; - } - break; - - case OTG_STATE_A_IDLE: - iotg->otg.default_a = 1; - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - iotg->hsm.vbus_srp_up = 0; - - langwell_otg_chrg_vbus(0); - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_bus_drop && - (iotg->hsm.a_srp_det || iotg->hsm.a_bus_req)) { - langwell_otg_phy_low_power(0); - - /* Turn on VBus */ - iotg->otg.set_vbus(&iotg->otg, true); - - iotg->hsm.vbus_srp_up = 0; - iotg->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - iotg->otg.state = OTG_STATE_A_WAIT_VRISE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_bus_drop && iotg->hsm.a_sess_vld) { - iotg->hsm.vbus_srp_up = 1; - } else if (!iotg->hsm.a_sess_vld && iotg->hsm.vbus_srp_up) { - msleep(10); - langwell_otg_phy_low_power(0); - - /* Turn on VBus */ - iotg->otg.set_vbus(&iotg->otg, true); - iotg->hsm.a_srp_det = 1; - iotg->hsm.vbus_srp_up = 0; - iotg->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - iotg->otg.state = OTG_STATE_A_WAIT_VRISE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_sess_vld && - !iotg->hsm.vbus_srp_up) { - langwell_otg_phy_low_power(1); - } - break; - case OTG_STATE_A_WAIT_VRISE: - if (iotg->hsm.id) { - langwell_otg_del_timer(a_wait_vrise_tmr); - iotg->hsm.b_bus_req = 0; - iotg->otg.default_a = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - } else if (iotg->hsm.a_vbus_vld) { - langwell_otg_del_timer(a_wait_vrise_tmr); - iotg->hsm.b_conn = 0; - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else { - dev_dbg(lnw->dev, "host driver not loaded.\n"); - break; - } - - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } else if (iotg->hsm.a_wait_vrise_tmout) { - iotg->hsm.b_conn = 0; - if (iotg->hsm.a_vbus_vld) { - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else { - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - break; - } - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } else { - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } - } - break; - case OTG_STATE_A_WAIT_BCON: - if (iotg->hsm.id) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_vbus_vld) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (iotg->hsm.a_bus_drop || - (iotg->hsm.a_wait_bcon_tmout && - !iotg->hsm.a_bus_req)) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (iotg->hsm.b_conn) { - /* delete hsm timer for a_wait_bcon_tmr */ - del_timer_sync(&lnw->hsm_timer); - - iotg->hsm.a_suspend_req = 0; - iotg->otg.state = OTG_STATE_A_HOST; - if (iotg->hsm.a_srp_det && iotg->otg.host && - !iotg->otg.host->b_hnp_enable) { - /* SRP capable peripheral-only device */ - iotg->hsm.a_bus_req = 1; - iotg->hsm.a_srp_det = 0; - } else if (!iotg->hsm.a_bus_req && iotg->otg.host && - iotg->otg.host->b_hnp_enable) { - /* It is not safe enough to do a fast - * transition from A_WAIT_BCON to - * A_SUSPEND */ - msleep(10000); - if (iotg->hsm.a_bus_req) - break; - - if (request_irq(pdev->irq, - otg_dummy_irq, IRQF_SHARED, - driver_name, iotg->base) != 0) { - dev_dbg(lnw->dev, - "request interrupt %d fail\n", - pdev->irq); - } - - langwell_otg_HABA(1); - iotg->hsm.b_bus_resume = 0; - iotg->hsm.a_aidl_bdis_tmout = 0; - - langwell_otg_loc_sof(0); - /* clear PHCD to enable HW timer */ - langwell_otg_phy_low_power(0); - langwell_otg_add_timer(a_aidl_bdis_tmr); - iotg->otg.state = OTG_STATE_A_SUSPEND; - } else if (!iotg->hsm.a_bus_req && iotg->otg.host && - !iotg->otg.host->b_hnp_enable) { - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } - } - break; - case OTG_STATE_A_HOST: - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_drop || - (iotg->otg.host && - !iotg->otg.host->b_hnp_enable && - !iotg->hsm.a_bus_req)) { - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (!iotg->hsm.a_vbus_vld) { - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (iotg->otg.host && - iotg->otg.host->b_hnp_enable && - !iotg->hsm.a_bus_req) { - /* Set HABA to enable hardware assistance to signal - * A-connect after receiver B-disconnect. Hardware - * will then set client mode and enable URE, SLE and - * PCE after the assistance. otg_dummy_irq is used to - * clean these ints when client driver is not resumed. - */ - if (request_irq(pdev->irq, otg_dummy_irq, IRQF_SHARED, - driver_name, iotg->base) != 0) { - dev_dbg(lnw->dev, - "request interrupt %d failed\n", - pdev->irq); - } - - /* set HABA */ - langwell_otg_HABA(1); - iotg->hsm.b_bus_resume = 0; - iotg->hsm.a_aidl_bdis_tmout = 0; - langwell_otg_loc_sof(0); - /* clear PHCD to enable HW timer */ - langwell_otg_phy_low_power(0); - langwell_otg_add_timer(a_aidl_bdis_tmr); - iotg->otg.state = OTG_STATE_A_SUSPEND; - } else if (!iotg->hsm.b_conn || !iotg->hsm.a_bus_req) { - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } - break; - case OTG_STATE_A_SUSPEND: - if (iotg->hsm.id) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_req || - iotg->hsm.b_bus_resume) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - iotg->hsm.a_suspend_req = 0; - langwell_otg_loc_sof(1); - iotg->otg.state = OTG_STATE_A_HOST; - } else if (iotg->hsm.a_aidl_bdis_tmout || - iotg->hsm.a_bus_drop) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (!iotg->hsm.b_conn && iotg->otg.host && - iotg->otg.host->b_hnp_enable) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - iotg->hsm.b_bus_suspend = 0; - iotg->hsm.b_bus_suspend_vld = 0; - - /* msleep(200); */ - if (lnw->iotg.start_peripheral) - lnw->iotg.start_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver not loaded.\n"); - - langwell_otg_add_ktimer(TB_BUS_SUSPEND_TMR); - iotg->otg.state = OTG_STATE_A_PERIPHERAL; - break; - } else if (!iotg->hsm.a_vbus_vld) { - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - free_irq(pdev->irq, iotg->base); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } - break; - case OTG_STATE_A_PERIPHERAL: - if (iotg->hsm.id) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - iotg->otg.default_a = 0; - iotg->hsm.b_bus_req = 0; - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - set_client_mode(); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (!iotg->hsm.a_vbus_vld) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - langwell_otg_phy_low_power_wait(1); - iotg->otg.state = OTG_STATE_A_VBUS_ERR; - } else if (iotg->hsm.a_bus_drop) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_WAIT_VFALL; - } else if (iotg->hsm.b_bus_suspend) { - /* delete hsm timer for b_bus_suspend_tmr */ - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } else if (iotg->hsm.b_bus_suspend_tmout) { - u32 val; - val = readl(lnw->iotg.base + CI_PORTSC1); - if (!(val & PORTSC_SUSP)) - break; - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(lnw->dev, - "client driver has been removed.\n"); - - if (lnw->iotg.start_host) - lnw->iotg.start_host(&lnw->iotg); - else - dev_dbg(lnw->dev, - "host driver not loaded.\n"); - langwell_otg_add_ktimer(TA_WAIT_BCON_TMR); - iotg->otg.state = OTG_STATE_A_WAIT_BCON; - } - break; - case OTG_STATE_A_VBUS_ERR: - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - iotg->hsm.a_clr_err = 0; - iotg->hsm.a_srp_det = 0; - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_clr_err) { - iotg->hsm.a_clr_err = 0; - iotg->hsm.a_srp_det = 0; - reset_otg(); - init_hsm(); - if (iotg->otg.state == OTG_STATE_A_IDLE) - langwell_update_transceiver(); - } else { - /* FW will clear PHCD bit when any VBus - * event detected. Reset PHCD to 1 again */ - langwell_otg_phy_low_power(1); - } - break; - case OTG_STATE_A_WAIT_VFALL: - if (iotg->hsm.id) { - iotg->otg.default_a = 0; - set_client_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_B_IDLE; - langwell_update_transceiver(); - } else if (iotg->hsm.a_bus_req) { - - /* Turn on VBus */ - iotg->otg.set_vbus(&iotg->otg, true); - iotg->hsm.a_wait_vrise_tmout = 0; - langwell_otg_add_timer(a_wait_vrise_tmr); - iotg->otg.state = OTG_STATE_A_WAIT_VRISE; - } else if (!iotg->hsm.a_sess_vld) { - iotg->hsm.a_srp_det = 0; - set_host_mode(); - langwell_otg_phy_low_power(1); - iotg->otg.state = OTG_STATE_A_IDLE; - } - break; - default: - ; - } - - dev_dbg(lnw->dev, "%s: new state = %s\n", __func__, - otg_state_string(iotg->otg.state)); -} - -static ssize_t -show_registers(struct device *_dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, - "\n" - "USBCMD = 0x%08x\n" - "USBSTS = 0x%08x\n" - "USBINTR = 0x%08x\n" - "ASYNCLISTADDR = 0x%08x\n" - "PORTSC1 = 0x%08x\n" - "HOSTPC1 = 0x%08x\n" - "OTGSC = 0x%08x\n" - "USBMODE = 0x%08x\n", - readl(lnw->iotg.base + 0x30), - readl(lnw->iotg.base + 0x34), - readl(lnw->iotg.base + 0x38), - readl(lnw->iotg.base + 0x48), - readl(lnw->iotg.base + 0x74), - readl(lnw->iotg.base + 0xb4), - readl(lnw->iotg.base + 0xf4), - readl(lnw->iotg.base + 0xf8) - ); - size -= t; - next += t; - - return PAGE_SIZE - size; -} -static DEVICE_ATTR(registers, S_IRUGO, show_registers, NULL); - -static ssize_t -show_hsm(struct device *_dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - if (iotg->otg.host) - iotg->hsm.a_set_b_hnp_en = iotg->otg.host->b_hnp_enable; - - if (iotg->otg.gadget) - iotg->hsm.b_hnp_enable = iotg->otg.gadget->b_hnp_enable; - - t = scnprintf(next, size, - "\n" - "current state = %s\n" - "a_bus_resume = \t%d\n" - "a_bus_suspend = \t%d\n" - "a_conn = \t%d\n" - "a_sess_vld = \t%d\n" - "a_srp_det = \t%d\n" - "a_vbus_vld = \t%d\n" - "b_bus_resume = \t%d\n" - "b_bus_suspend = \t%d\n" - "b_conn = \t%d\n" - "b_se0_srp = \t%d\n" - "b_sess_end = \t%d\n" - "b_sess_vld = \t%d\n" - "id = \t%d\n" - "a_set_b_hnp_en = \t%d\n" - "b_srp_done = \t%d\n" - "b_hnp_enable = \t%d\n" - "a_wait_vrise_tmout = \t%d\n" - "a_wait_bcon_tmout = \t%d\n" - "a_aidl_bdis_tmout = \t%d\n" - "b_ase0_brst_tmout = \t%d\n" - "a_bus_drop = \t%d\n" - "a_bus_req = \t%d\n" - "a_clr_err = \t%d\n" - "a_suspend_req = \t%d\n" - "b_bus_req = \t%d\n" - "b_bus_suspend_tmout = \t%d\n" - "b_bus_suspend_vld = \t%d\n", - otg_state_string(iotg->otg.state), - iotg->hsm.a_bus_resume, - iotg->hsm.a_bus_suspend, - iotg->hsm.a_conn, - iotg->hsm.a_sess_vld, - iotg->hsm.a_srp_det, - iotg->hsm.a_vbus_vld, - iotg->hsm.b_bus_resume, - iotg->hsm.b_bus_suspend, - iotg->hsm.b_conn, - iotg->hsm.b_se0_srp, - iotg->hsm.b_sess_end, - iotg->hsm.b_sess_vld, - iotg->hsm.id, - iotg->hsm.a_set_b_hnp_en, - iotg->hsm.b_srp_done, - iotg->hsm.b_hnp_enable, - iotg->hsm.a_wait_vrise_tmout, - iotg->hsm.a_wait_bcon_tmout, - iotg->hsm.a_aidl_bdis_tmout, - iotg->hsm.b_ase0_brst_tmout, - iotg->hsm.a_bus_drop, - iotg->hsm.a_bus_req, - iotg->hsm.a_clr_err, - iotg->hsm.a_suspend_req, - iotg->hsm.b_bus_req, - iotg->hsm.b_bus_suspend_tmout, - iotg->hsm.b_bus_suspend_vld - ); - size -= t; - next += t; - - return PAGE_SIZE - size; -} -static DEVICE_ATTR(hsm, S_IRUGO, show_hsm, NULL); - -static ssize_t -get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", lnw->iotg.hsm.a_bus_req); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_a_bus_req(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (!iotg->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '0') { - iotg->hsm.a_bus_req = 0; - dev_dbg(lnw->dev, "User request: a_bus_req = 0\n"); - } else if (buf[0] == '1') { - /* If a_bus_drop is TRUE, a_bus_req can't be set */ - if (iotg->hsm.a_bus_drop) - return -1; - iotg->hsm.a_bus_req = 1; - dev_dbg(lnw->dev, "User request: a_bus_req = 1\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, set_a_bus_req); - -static ssize_t -get_a_bus_drop(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", lnw->iotg.hsm.a_bus_drop); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_a_bus_drop(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (!iotg->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '0') { - iotg->hsm.a_bus_drop = 0; - dev_dbg(lnw->dev, "User request: a_bus_drop = 0\n"); - } else if (buf[0] == '1') { - iotg->hsm.a_bus_drop = 1; - iotg->hsm.a_bus_req = 0; - dev_dbg(lnw->dev, "User request: a_bus_drop = 1\n"); - dev_dbg(lnw->dev, "User request: and a_bus_req = 0\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, get_a_bus_drop, set_a_bus_drop); - -static ssize_t -get_b_bus_req(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct langwell_otg *lnw = the_transceiver; - char *next; - unsigned size, t; - - next = buf; - size = PAGE_SIZE; - - t = scnprintf(next, size, "%d", lnw->iotg.hsm.b_bus_req); - size -= t; - next += t; - - return PAGE_SIZE - size; -} - -static ssize_t -set_b_bus_req(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (iotg->otg.default_a) - return -1; - - if (count > 2) - return -1; - - if (buf[0] == '0') { - iotg->hsm.b_bus_req = 0; - dev_dbg(lnw->dev, "User request: b_bus_req = 0\n"); - } else if (buf[0] == '1') { - iotg->hsm.b_bus_req = 1; - dev_dbg(lnw->dev, "User request: b_bus_req = 1\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(b_bus_req, S_IRUGO | S_IWUSR, get_b_bus_req, set_b_bus_req); - -static ssize_t -set_a_clr_err(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - - if (!iotg->otg.default_a) - return -1; - if (count > 2) - return -1; - - if (buf[0] == '1') { - iotg->hsm.a_clr_err = 1; - dev_dbg(lnw->dev, "User request: a_clr_err = 1\n"); - } - if (spin_trylock(&lnw->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&lnw->wq_lock); - } - return count; -} -static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err); - -static struct attribute *inputs_attrs[] = { - &dev_attr_a_bus_req.attr, - &dev_attr_a_bus_drop.attr, - &dev_attr_b_bus_req.attr, - &dev_attr_a_clr_err.attr, - NULL, -}; - -static struct attribute_group debug_dev_attr_group = { - .name = "inputs", - .attrs = inputs_attrs, -}; - -static int langwell_otg_probe(struct pci_dev *pdev, - const struct pci_device_id *id) -{ - unsigned long resource, len; - void __iomem *base = NULL; - int retval; - u32 val32; - struct langwell_otg *lnw; - char qname[] = "langwell_otg_queue"; - - retval = 0; - dev_dbg(&pdev->dev, "\notg controller is detected.\n"); - if (pci_enable_device(pdev) < 0) { - retval = -ENODEV; - goto done; - } - - lnw = kzalloc(sizeof *lnw, GFP_KERNEL); - if (lnw == NULL) { - retval = -ENOMEM; - goto done; - } - the_transceiver = lnw; - - /* control register: BAR 0 */ - resource = pci_resource_start(pdev, 0); - len = pci_resource_len(pdev, 0); - if (!request_mem_region(resource, len, driver_name)) { - retval = -EBUSY; - goto err; - } - lnw->region = 1; - - base = ioremap_nocache(resource, len); - if (base == NULL) { - retval = -EFAULT; - goto err; - } - lnw->iotg.base = base; - - if (!request_mem_region(USBCFG_ADDR, USBCFG_LEN, driver_name)) { - retval = -EBUSY; - goto err; - } - lnw->cfg_region = 1; - - /* For the SCCB.USBCFG register */ - base = ioremap_nocache(USBCFG_ADDR, USBCFG_LEN); - if (base == NULL) { - retval = -EFAULT; - goto err; - } - lnw->usbcfg = base; - - if (!pdev->irq) { - dev_dbg(&pdev->dev, "No IRQ.\n"); - retval = -ENODEV; - goto err; - } - - lnw->qwork = create_singlethread_workqueue(qname); - if (!lnw->qwork) { - dev_dbg(&pdev->dev, "cannot create workqueue %s\n", qname); - retval = -ENOMEM; - goto err; - } - INIT_WORK(&lnw->work, langwell_otg_work); - - /* OTG common part */ - lnw->dev = &pdev->dev; - lnw->iotg.otg.dev = lnw->dev; - lnw->iotg.otg.label = driver_name; - lnw->iotg.otg.set_host = langwell_otg_set_host; - lnw->iotg.otg.set_peripheral = langwell_otg_set_peripheral; - lnw->iotg.otg.set_power = langwell_otg_set_power; - lnw->iotg.otg.set_vbus = langwell_otg_set_vbus; - lnw->iotg.otg.start_srp = langwell_otg_start_srp; - lnw->iotg.otg.state = OTG_STATE_UNDEFINED; - - if (otg_set_transceiver(&lnw->iotg.otg)) { - dev_dbg(lnw->dev, "can't set transceiver\n"); - retval = -EBUSY; - goto err; - } - - reset_otg(); - init_hsm(); - - spin_lock_init(&lnw->lock); - spin_lock_init(&lnw->wq_lock); - INIT_LIST_HEAD(&active_timers); - retval = langwell_otg_init_timers(&lnw->iotg.hsm); - if (retval) { - dev_dbg(&pdev->dev, "Failed to init timers\n"); - goto err; - } - - init_timer(&lnw->hsm_timer); - ATOMIC_INIT_NOTIFIER_HEAD(&lnw->iotg.iotg_notifier); - - lnw->iotg_notifier.notifier_call = langwell_otg_iotg_notify; - - retval = intel_mid_otg_register_notifier(&lnw->iotg, - &lnw->iotg_notifier); - if (retval) { - dev_dbg(lnw->dev, "Failed to register notifier\n"); - goto err; - } - - if (request_irq(pdev->irq, otg_irq, IRQF_SHARED, - driver_name, lnw) != 0) { - dev_dbg(lnw->dev, "request interrupt %d failed\n", pdev->irq); - retval = -EBUSY; - goto err; - } - - /* enable OTGSC int */ - val32 = OTGSC_DPIE | OTGSC_BSEIE | OTGSC_BSVIE | - OTGSC_ASVIE | OTGSC_AVVIE | OTGSC_IDIE | OTGSC_IDPU; - writel(val32, lnw->iotg.base + CI_OTGSC); - - retval = device_create_file(&pdev->dev, &dev_attr_registers); - if (retval < 0) { - dev_dbg(lnw->dev, - "Can't register sysfs attribute: %d\n", retval); - goto err; - } - - retval = device_create_file(&pdev->dev, &dev_attr_hsm); - if (retval < 0) { - dev_dbg(lnw->dev, "Can't hsm sysfs attribute: %d\n", retval); - goto err; - } - - retval = sysfs_create_group(&pdev->dev.kobj, &debug_dev_attr_group); - if (retval < 0) { - dev_dbg(lnw->dev, - "Can't register sysfs attr group: %d\n", retval); - goto err; - } - - if (lnw->iotg.otg.state == OTG_STATE_A_IDLE) - langwell_update_transceiver(); - - return 0; - -err: - if (the_transceiver) - langwell_otg_remove(pdev); -done: - return retval; -} - -static void langwell_otg_remove(struct pci_dev *pdev) -{ - struct langwell_otg *lnw = the_transceiver; - - if (lnw->qwork) { - flush_workqueue(lnw->qwork); - destroy_workqueue(lnw->qwork); - } - intel_mid_otg_unregister_notifier(&lnw->iotg, &lnw->iotg_notifier); - langwell_otg_free_timers(); - - /* disable OTGSC interrupt as OTGSC doesn't change in reset */ - writel(0, lnw->iotg.base + CI_OTGSC); - - if (pdev->irq) - free_irq(pdev->irq, lnw); - if (lnw->usbcfg) - iounmap(lnw->usbcfg); - if (lnw->cfg_region) - release_mem_region(USBCFG_ADDR, USBCFG_LEN); - if (lnw->iotg.base) - iounmap(lnw->iotg.base); - if (lnw->region) - release_mem_region(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); - - otg_set_transceiver(NULL); - pci_disable_device(pdev); - sysfs_remove_group(&pdev->dev.kobj, &debug_dev_attr_group); - device_remove_file(&pdev->dev, &dev_attr_hsm); - device_remove_file(&pdev->dev, &dev_attr_registers); - kfree(lnw); - lnw = NULL; -} - -static void transceiver_suspend(struct pci_dev *pdev) -{ - pci_save_state(pdev); - pci_set_power_state(pdev, PCI_D3hot); - langwell_otg_phy_low_power(1); -} - -static int langwell_otg_suspend(struct pci_dev *pdev, pm_message_t message) -{ - struct langwell_otg *lnw = the_transceiver; - struct intel_mid_otg_xceiv *iotg = &lnw->iotg; - int ret = 0; - - /* Disbale OTG interrupts */ - langwell_otg_intr(0); - - if (pdev->irq) - free_irq(pdev->irq, lnw); - - /* Prevent more otg_work */ - flush_workqueue(lnw->qwork); - destroy_workqueue(lnw->qwork); - lnw->qwork = NULL; - - /* start actions */ - switch (iotg->otg.state) { - case OTG_STATE_A_WAIT_VFALL: - iotg->otg.state = OTG_STATE_A_IDLE; - case OTG_STATE_A_IDLE: - case OTG_STATE_B_IDLE: - case OTG_STATE_A_VBUS_ERR: - transceiver_suspend(pdev); - break; - case OTG_STATE_A_WAIT_VRISE: - langwell_otg_del_timer(a_wait_vrise_tmr); - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_WAIT_BCON: - del_timer_sync(&lnw->hsm_timer); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_HOST: - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_SUSPEND: - langwell_otg_del_timer(a_aidl_bdis_tmr); - langwell_otg_HABA(0); - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(lnw->dev, "host driver has been removed.\n"); - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_A_PERIPHERAL: - del_timer_sync(&lnw->hsm_timer); - - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(&pdev->dev, - "client driver has been removed.\n"); - iotg->hsm.a_srp_det = 0; - - /* Turn off VBus */ - iotg->otg.set_vbus(&iotg->otg, false); - iotg->otg.state = OTG_STATE_A_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_B_HOST: - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - iotg->hsm.b_bus_req = 0; - iotg->otg.state = OTG_STATE_B_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_B_PERIPHERAL: - if (lnw->iotg.stop_peripheral) - lnw->iotg.stop_peripheral(&lnw->iotg); - else - dev_dbg(&pdev->dev, - "client driver has been removed.\n"); - iotg->otg.state = OTG_STATE_B_IDLE; - transceiver_suspend(pdev); - break; - case OTG_STATE_B_WAIT_ACON: - /* delete hsm timer for b_ase0_brst_tmr */ - del_timer_sync(&lnw->hsm_timer); - - langwell_otg_HAAR(0); - - if (lnw->iotg.stop_host) - lnw->iotg.stop_host(&lnw->iotg); - else - dev_dbg(&pdev->dev, "host driver has been removed.\n"); - iotg->hsm.b_bus_req = 0; - iotg->otg.state = OTG_STATE_B_IDLE; - transceiver_suspend(pdev); - break; - default: - dev_dbg(lnw->dev, "error state before suspend\n"); - break; - } - - return ret; -} - -static void transceiver_resume(struct pci_dev *pdev) -{ - pci_restore_state(pdev); - pci_set_power_state(pdev, PCI_D0); -} - -static int langwell_otg_resume(struct pci_dev *pdev) -{ - struct langwell_otg *lnw = the_transceiver; - int ret = 0; - - transceiver_resume(pdev); - - lnw->qwork = create_singlethread_workqueue("langwell_otg_queue"); - if (!lnw->qwork) { - dev_dbg(&pdev->dev, "cannot create langwell otg workqueuen"); - ret = -ENOMEM; - goto error; - } - - if (request_irq(pdev->irq, otg_irq, IRQF_SHARED, - driver_name, lnw) != 0) { - dev_dbg(&pdev->dev, "request interrupt %d failed\n", pdev->irq); - ret = -EBUSY; - goto error; - } - - /* enable OTG interrupts */ - langwell_otg_intr(1); - - update_hsm(); - - langwell_update_transceiver(); - - return ret; -error: - langwell_otg_intr(0); - transceiver_suspend(pdev); - return ret; -} - -static int __init langwell_otg_init(void) -{ - return pci_register_driver(&otg_pci_driver); -} -module_init(langwell_otg_init); - -static void __exit langwell_otg_cleanup(void) -{ - pci_unregister_driver(&otg_pci_driver); -} -module_exit(langwell_otg_cleanup); diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h deleted file mode 100644 index 51f17b16d312..000000000000 --- a/include/linux/usb/langwell_otg.h +++ /dev/null @@ -1,139 +0,0 @@ -/* - * Intel Langwell USB OTG transceiver driver - * Copyright (C) 2008 - 2010, Intel Corporation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., - * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * - */ - -#ifndef __LANGWELL_OTG_H -#define __LANGWELL_OTG_H - -#include - -#define CI_USBCMD 0x30 -# define USBCMD_RST BIT(1) -# define USBCMD_RS BIT(0) -#define CI_USBSTS 0x34 -# define USBSTS_SLI BIT(8) -# define USBSTS_URI BIT(6) -# define USBSTS_PCI BIT(2) -#define CI_PORTSC1 0x74 -# define PORTSC_PP BIT(12) -# define PORTSC_LS (BIT(11) | BIT(10)) -# define PORTSC_SUSP BIT(7) -# define PORTSC_CCS BIT(0) -#define CI_HOSTPC1 0xb4 -# define HOSTPC1_PHCD BIT(22) -#define CI_OTGSC 0xf4 -# define OTGSC_DPIE BIT(30) -# define OTGSC_1MSE BIT(29) -# define OTGSC_BSEIE BIT(28) -# define OTGSC_BSVIE BIT(27) -# define OTGSC_ASVIE BIT(26) -# define OTGSC_AVVIE BIT(25) -# define OTGSC_IDIE BIT(24) -# define OTGSC_DPIS BIT(22) -# define OTGSC_1MSS BIT(21) -# define OTGSC_BSEIS BIT(20) -# define OTGSC_BSVIS BIT(19) -# define OTGSC_ASVIS BIT(18) -# define OTGSC_AVVIS BIT(17) -# define OTGSC_IDIS BIT(16) -# define OTGSC_DPS BIT(14) -# define OTGSC_1MST BIT(13) -# define OTGSC_BSE BIT(12) -# define OTGSC_BSV BIT(11) -# define OTGSC_ASV BIT(10) -# define OTGSC_AVV BIT(9) -# define OTGSC_ID BIT(8) -# define OTGSC_HABA BIT(7) -# define OTGSC_HADP BIT(6) -# define OTGSC_IDPU BIT(5) -# define OTGSC_DP BIT(4) -# define OTGSC_OT BIT(3) -# define OTGSC_HAAR BIT(2) -# define OTGSC_VC BIT(1) -# define OTGSC_VD BIT(0) -# define OTGSC_INTEN_MASK (0x7f << 24) -# define OTGSC_INT_MASK (0x5f << 24) -# define OTGSC_INTSTS_MASK (0x7f << 16) -#define CI_USBMODE 0xf8 -# define USBMODE_CM (BIT(1) | BIT(0)) -# define USBMODE_IDLE 0 -# define USBMODE_DEVICE 0x2 -# define USBMODE_HOST 0x3 -#define USBCFG_ADDR 0xff10801c -#define USBCFG_LEN 4 -# define USBCFG_VBUSVAL BIT(14) -# define USBCFG_AVALID BIT(13) -# define USBCFG_BVALID BIT(12) -# define USBCFG_SESEND BIT(11) - -#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI) - -enum langwell_otg_timer_type { - TA_WAIT_VRISE_TMR, - TA_WAIT_BCON_TMR, - TA_AIDL_BDIS_TMR, - TB_ASE0_BRST_TMR, - TB_SE0_SRP_TMR, - TB_SRP_INIT_TMR, - TB_SRP_FAIL_TMR, - TB_BUS_SUSPEND_TMR -}; - -#define TA_WAIT_VRISE 100 -#define TA_WAIT_BCON 30000 -#define TA_AIDL_BDIS 15000 -#define TB_ASE0_BRST 5000 -#define TB_SE0_SRP 2 -#define TB_SRP_INIT 100 -#define TB_SRP_FAIL 5500 -#define TB_BUS_SUSPEND 500 - -struct langwell_otg_timer { - unsigned long expires; /* Number of count increase to timeout */ - unsigned long count; /* Tick counter */ - void (*function)(unsigned long); /* Timeout function */ - unsigned long data; /* Data passed to function */ - struct list_head list; -}; - -struct langwell_otg { - struct intel_mid_otg_xceiv iotg; - struct device *dev; - - void __iomem *usbcfg; /* SCCBUSB config Reg */ - - unsigned region; - unsigned cfg_region; - - struct work_struct work; - struct workqueue_struct *qwork; - struct timer_list hsm_timer; - - spinlock_t lock; - spinlock_t wq_lock; - - struct notifier_block iotg_notifier; -}; - -static inline -struct langwell_otg *mid_xceiv_to_lnw(struct intel_mid_otg_xceiv *iotg) -{ - return container_of(iotg, struct langwell_otg, iotg); -} - -#endif /* __LANGWELL_OTG_H__ */ -- GitLab From 28bd6222544d7559edf9ff487172e45ce46e2578 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Wed, 21 Dec 2011 10:19:39 +0200 Subject: [PATCH 0139/1359] usb: gadget: langwell: drop langwell_otg support Since there is no working (or even compilable) OTG_TRANSCEIVER support for this driver, remove the dead code which depends on it at compile time. Signed-off-by: Alexander Shishkin Cc: stable@vger.kernel.org # v2.6.31+ Cc: Heikki Krogerus Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi --- drivers/usb/gadget/langwell_udc.c | 89 +------------------------------ drivers/usb/gadget/langwell_udc.h | 1 - 2 files changed, 2 insertions(+), 88 deletions(-) diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index fa0fcc11263f..34e3bf877341 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -11,11 +11,6 @@ /* #undef DEBUG */ /* #undef VERBOSE_DEBUG */ -#if defined(CONFIG_USB_LANGWELL_OTG) -#define OTG_TRANSCEIVER -#endif - - #include #include #include @@ -2315,13 +2310,9 @@ static void handle_setup_packet(struct langwell_udc *dev, if (!gadget_is_otg(&dev->gadget)) break; - else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) { + else if (setup->bRequest == USB_DEVICE_B_HNP_ENABLE) dev->gadget.b_hnp_enable = 1; -#ifdef OTG_TRANSCEIVER - if (!dev->lotg->otg.default_a) - dev->lotg->hsm.b_hnp_enable = 1; -#endif - } else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT) + else if (setup->bRequest == USB_DEVICE_A_HNP_SUPPORT) dev->gadget.a_hnp_support = 1; else if (setup->bRequest == USB_DEVICE_A_ALT_HNP_SUPPORT) @@ -2752,12 +2743,6 @@ static void handle_usb_reset(struct langwell_udc *dev) dev->usb_state = USB_STATE_ATTACHED; } -#ifdef OTG_TRANSCEIVER - /* refer to USB OTG 6.6.2.3 b_hnp_en is cleared */ - if (!dev->lotg->otg.default_a) - dev->lotg->hsm.b_hnp_enable = 0; -#endif - dev_vdbg(&dev->pdev->dev, "<--- %s()\n", __func__); } @@ -2770,29 +2755,6 @@ static void handle_bus_suspend(struct langwell_udc *dev) dev->resume_state = dev->usb_state; dev->usb_state = USB_STATE_SUSPENDED; -#ifdef OTG_TRANSCEIVER - if (dev->lotg->otg.default_a) { - if (dev->lotg->hsm.b_bus_suspend_vld == 1) { - dev->lotg->hsm.b_bus_suspend = 1; - /* notify transceiver the state changes */ - if (spin_trylock(&dev->lotg->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&dev->lotg->wq_lock); - } - } - dev->lotg->hsm.b_bus_suspend_vld++; - } else { - if (!dev->lotg->hsm.a_bus_suspend) { - dev->lotg->hsm.a_bus_suspend = 1; - /* notify transceiver the state changes */ - if (spin_trylock(&dev->lotg->wq_lock)) { - langwell_update_transceiver(); - spin_unlock(&dev->lotg->wq_lock); - } - } - } -#endif - /* report suspend to the driver */ if (dev->driver) { if (dev->driver->suspend) { @@ -2823,11 +2785,6 @@ static void handle_bus_resume(struct langwell_udc *dev) if (dev->pdev->device != 0x0829) langwell_phy_low_power(dev, 0); -#ifdef OTG_TRANSCEIVER - if (dev->lotg->otg.default_a == 0) - dev->lotg->hsm.a_bus_suspend = 0; -#endif - /* report resume to the driver */ if (dev->driver) { if (dev->driver->resume) { @@ -3020,7 +2977,6 @@ static void langwell_udc_remove(struct pci_dev *pdev) dev->done = &done; -#ifndef OTG_TRANSCEIVER /* free dTD dma_pool and dQH */ if (dev->dtd_pool) dma_pool_destroy(dev->dtd_pool); @@ -3032,7 +2988,6 @@ static void langwell_udc_remove(struct pci_dev *pdev) /* release SRAM caching */ if (dev->has_sram && dev->got_sram) sram_deinit(dev); -#endif if (dev->status_req) { kfree(dev->status_req->req.buf); @@ -3045,7 +3000,6 @@ static void langwell_udc_remove(struct pci_dev *pdev) if (dev->got_irq) free_irq(pdev->irq, dev); -#ifndef OTG_TRANSCEIVER if (dev->cap_regs) iounmap(dev->cap_regs); @@ -3055,13 +3009,6 @@ static void langwell_udc_remove(struct pci_dev *pdev) if (dev->enabled) pci_disable_device(pdev); -#else - if (dev->transceiver) { - otg_put_transceiver(dev->transceiver); - dev->transceiver = NULL; - dev->lotg = NULL; - } -#endif dev->cap_regs = NULL; @@ -3072,9 +3019,7 @@ static void langwell_udc_remove(struct pci_dev *pdev) device_remove_file(&pdev->dev, &dev_attr_langwell_udc); device_remove_file(&pdev->dev, &dev_attr_remote_wakeup); -#ifndef OTG_TRANSCEIVER pci_set_drvdata(pdev, NULL); -#endif /* free dev, wait for the release() finished */ wait_for_completion(&done); @@ -3089,9 +3034,7 @@ static int langwell_udc_probe(struct pci_dev *pdev, const struct pci_device_id *id) { struct langwell_udc *dev; -#ifndef OTG_TRANSCEIVER unsigned long resource, len; -#endif void __iomem *base = NULL; size_t size; int retval; @@ -3109,16 +3052,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, dev->pdev = pdev; dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); -#ifdef OTG_TRANSCEIVER - /* PCI device is already enabled by otg_transceiver driver */ - dev->enabled = 1; - - /* mem region and register base */ - dev->region = 1; - dev->transceiver = otg_get_transceiver(); - dev->lotg = otg_to_langwell(dev->transceiver); - base = dev->lotg->regs; -#else pci_set_drvdata(pdev, dev); /* now all the pci goodies ... */ @@ -3139,7 +3072,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, dev->region = 1; base = ioremap_nocache(resource, len); -#endif if (base == NULL) { dev_err(&dev->pdev->dev, "can't map memory\n"); retval = -EFAULT; @@ -3163,7 +3095,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, dev->got_sram = 0; dev_vdbg(&dev->pdev->dev, "dev->has_sram: %d\n", dev->has_sram); -#ifndef OTG_TRANSCEIVER /* enable SRAM caching if detected */ if (dev->has_sram && !dev->got_sram) sram_init(dev); @@ -3182,7 +3113,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, goto error; } dev->got_irq = 1; -#endif /* set stopped bit */ dev->stopped = 1; @@ -3257,10 +3187,8 @@ static int langwell_udc_probe(struct pci_dev *pdev, dev->remote_wakeup = 0; dev->dev_status = 1 << USB_DEVICE_SELF_POWERED; -#ifndef OTG_TRANSCEIVER /* reset device controller */ langwell_udc_reset(dev); -#endif /* initialize gadget structure */ dev->gadget.ops = &langwell_ops; /* usb_gadget_ops */ @@ -3268,9 +3196,6 @@ static int langwell_udc_probe(struct pci_dev *pdev, INIT_LIST_HEAD(&dev->gadget.ep_list); /* ep_list */ dev->gadget.speed = USB_SPEED_UNKNOWN; /* speed */ dev->gadget.max_speed = USB_SPEED_HIGH; /* support dual speed */ -#ifdef OTG_TRANSCEIVER - dev->gadget.is_otg = 1; /* support otg mode */ -#endif /* the "gadget" abstracts/virtualizes the controller */ dev_set_name(&dev->gadget.dev, "gadget"); @@ -3282,10 +3207,8 @@ static int langwell_udc_probe(struct pci_dev *pdev, /* controller endpoints reinit */ eps_reinit(dev); -#ifndef OTG_TRANSCEIVER /* reset ep0 dQH and endptctrl */ ep0_reset(dev); -#endif /* create dTD dma_pool resource */ dev->dtd_pool = dma_pool_create("langwell_dtd", @@ -3525,22 +3448,14 @@ static struct pci_driver langwell_pci_driver = { static int __init init(void) { -#ifdef OTG_TRANSCEIVER - return langwell_register_peripheral(&langwell_pci_driver); -#else return pci_register_driver(&langwell_pci_driver); -#endif } module_init(init); static void __exit cleanup(void) { -#ifdef OTG_TRANSCEIVER - return langwell_unregister_peripheral(&langwell_pci_driver); -#else pci_unregister_driver(&langwell_pci_driver); -#endif } module_exit(cleanup); diff --git a/drivers/usb/gadget/langwell_udc.h b/drivers/usb/gadget/langwell_udc.h index ef79e242b7b0..d6e78accaffe 100644 --- a/drivers/usb/gadget/langwell_udc.h +++ b/drivers/usb/gadget/langwell_udc.h @@ -8,7 +8,6 @@ */ #include -#include /*-------------------------------------------------------------------------*/ -- GitLab From 37fd37108449d574da11aa9055c5c8afb39ff226 Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Wed, 21 Dec 2011 10:19:40 +0200 Subject: [PATCH 0140/1359] usb: gadget: langwell: don't call gadget's disconnect() UDC core will call disconnect() and unbind() for us upon the gadget removal, so we should not do it ourselves. Otherwise, a composite gadget will explode, for example. Others might too. This was introduced during conversion to new style gadget in 2c7f0989 (usb: gadget: langwell: convert to new style). Signed-off-by: Alexander Shishkin Cc: stable@vger.kernel.org # v3.2 Cc: Heikki Krogerus Cc: Greg Kroah-Hartman Cc: linux-usb@vger.kernel.org Signed-off-by: Felipe Balbi --- drivers/usb/gadget/langwell_udc.c | 18 ++++++++---------- 1 file changed, 8 insertions(+), 10 deletions(-) diff --git a/drivers/usb/gadget/langwell_udc.c b/drivers/usb/gadget/langwell_udc.c index 34e3bf877341..e2293c1588ee 100644 --- a/drivers/usb/gadget/langwell_udc.c +++ b/drivers/usb/gadget/langwell_udc.c @@ -1517,8 +1517,7 @@ static void langwell_udc_stop(struct langwell_udc *dev) /* stop all USB activities */ -static void stop_activity(struct langwell_udc *dev, - struct usb_gadget_driver *driver) +static void stop_activity(struct langwell_udc *dev) { struct langwell_ep *ep; dev_dbg(&dev->pdev->dev, "---> %s()\n", __func__); @@ -1530,9 +1529,9 @@ static void stop_activity(struct langwell_udc *dev, } /* report disconnect; the driver is already quiesced */ - if (driver) { + if (dev->driver) { spin_unlock(&dev->lock); - driver->disconnect(&dev->gadget); + dev->driver->disconnect(&dev->gadget); spin_lock(&dev->lock); } @@ -1920,11 +1919,10 @@ static int langwell_stop(struct usb_gadget *g, /* stop all usb activities */ dev->gadget.speed = USB_SPEED_UNKNOWN; - stop_activity(dev, driver); - spin_unlock_irqrestore(&dev->lock, flags); - dev->gadget.dev.driver = NULL; dev->driver = NULL; + stop_activity(dev); + spin_unlock_irqrestore(&dev->lock, flags); device_remove_file(&dev->pdev->dev, &dev_attr_function); @@ -2724,7 +2722,7 @@ static void handle_usb_reset(struct langwell_udc *dev) dev->bus_reset = 1; /* reset all the queues, stop all USB activities */ - stop_activity(dev, dev->driver); + stop_activity(dev); dev->usb_state = USB_STATE_DEFAULT; } else { dev_vdbg(&dev->pdev->dev, "device controller reset\n"); @@ -2732,7 +2730,7 @@ static void handle_usb_reset(struct langwell_udc *dev) langwell_udc_reset(dev); /* reset all the queues, stop all USB activities */ - stop_activity(dev, dev->driver); + stop_activity(dev); /* reset ep0 dQH and endptctrl */ ep0_reset(dev); @@ -3290,7 +3288,7 @@ static int langwell_udc_suspend(struct pci_dev *pdev, pm_message_t state) spin_lock_irq(&dev->lock); /* stop all usb activities */ - stop_activity(dev, dev->driver); + stop_activity(dev); spin_unlock_irq(&dev->lock); /* free dTD dma_pool and dQH */ -- GitLab From 006896fc612f11bf0624db7814a75d0d5410855f Mon Sep 17 00:00:00 2001 From: Sekhar Nori Date: Wed, 28 Dec 2011 12:02:57 +0530 Subject: [PATCH 0141/1359] usb: musb: davinci: fix build breakage Commit 0020afb369859472a461ef4af6410732e929d402 (ARM: mach-davinci: remove mach/memory.h) removed mach/memory.h for DaVinci which broke DaVinci MUSB build. mach/memory.h is not actually needed in davinci.c, so remove it. While at it, also remove some more machine specific inclulde files which are not needed for build. Tested on DM644x EVM using USB card reader. Cc: stable@vger.kernel.org # v3.2 Signed-off-by: Sekhar Nori Signed-off-by: Felipe Balbi --- drivers/usb/musb/davinci.c | 3 --- 1 file changed, 3 deletions(-) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index f9a3f62a83b5..7c569f51212a 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -33,9 +33,6 @@ #include #include -#include -#include -#include #include #include -- GitLab From 1a0955fed11363bea66742fffc6f8ad1e6800a6d Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 10 Jan 2012 17:29:29 +0200 Subject: [PATCH 0142/1359] usb: dwc3: ep0: fix compile warning MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 34c60a7 (usb: dwc3: ep0: tidy up Pending Request handling) introduced a compile warning by leaving an unused variable. This patch fixes that warning: drivers/usb/dwc3/ep0.c: In function ‘__dwc3_gadget_ep0_queue’: drivers/usb/dwc3/ep0.c:129:8: warning: unused variable ‘type’ [-Wunused-variable] Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/ep0.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 74a3828cf950..c8df1dd967ef 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -126,7 +126,6 @@ static int __dwc3_gadget_ep0_queue(struct dwc3_ep *dep, struct dwc3_request *req) { struct dwc3 *dwc = dep->dwc; - u32 type; int ret = 0; req->request.actual = 0; -- GitLab From a85016390135d577c457876d0e905095600751de Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Wed, 4 Jan 2012 15:18:27 +0800 Subject: [PATCH 0143/1359] usb: gadget: storage: endian fix Fix some endian issues for storage gadgets. Cc: stable@vger.kernel.org Signed-off-by: Andiry Xu Signed-off-by: Felipe Balbi --- drivers/usb/gadget/storage_common.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/usb/gadget/storage_common.c b/drivers/usb/gadget/storage_common.c index c7f291a331df..85ea14e2545e 100644 --- a/drivers/usb/gadget/storage_common.c +++ b/drivers/usb/gadget/storage_common.c @@ -598,16 +598,16 @@ static __maybe_unused struct usb_ss_cap_descriptor fsg_ss_cap_desc = { | USB_5GBPS_OPERATION), .bFunctionalitySupport = USB_LOW_SPEED_OPERATION, .bU1devExitLat = USB_DEFAULT_U1_DEV_EXIT_LAT, - .bU2DevExitLat = USB_DEFAULT_U2_DEV_EXIT_LAT, + .bU2DevExitLat = cpu_to_le16(USB_DEFAULT_U2_DEV_EXIT_LAT), }; static __maybe_unused struct usb_bos_descriptor fsg_bos_desc = { .bLength = USB_DT_BOS_SIZE, .bDescriptorType = USB_DT_BOS, - .wTotalLength = USB_DT_BOS_SIZE + .wTotalLength = cpu_to_le16(USB_DT_BOS_SIZE + USB_DT_USB_EXT_CAP_SIZE - + USB_DT_USB_SS_CAP_SIZE, + + USB_DT_USB_SS_CAP_SIZE), .bNumDeviceCaps = 2, }; -- GitLab From 9e878a6bfa9e1cf70cf77caeca60a0465d77954b Mon Sep 17 00:00:00 2001 From: Paul Zimmerman Date: Mon, 16 Jan 2012 13:24:38 -0800 Subject: [PATCH 0144/1359] usb: gadget: SS Isoc endpoints use comp_desc->bMaxBurst too SuperSpeed Isoc endpoints also use the bMaxBurst value from the companion descriptor. See section 9.6.7 in the USB 3.0 spec. Signed-off-by: Paul Zimmerman Signed-off-by: Felipe Balbi --- drivers/usb/gadget/composite.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index a95de6a4a134..baaebf2830fc 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -175,13 +175,12 @@ ep_found: _ep->comp_desc = comp_desc; if (g->speed == USB_SPEED_SUPER) { switch (usb_endpoint_type(_ep->desc)) { - case USB_ENDPOINT_XFER_BULK: - case USB_ENDPOINT_XFER_INT: - _ep->maxburst = comp_desc->bMaxBurst; - break; case USB_ENDPOINT_XFER_ISOC: /* mult: bits 1:0 of bmAttributes */ _ep->mult = comp_desc->bmAttributes & 0x3; + case USB_ENDPOINT_XFER_BULK: + case USB_ENDPOINT_XFER_INT: + _ep->maxburst = comp_desc->bMaxBurst; break; default: /* Do nothing for control endpoints */ -- GitLab From 7983bc74fc0bc91f026c7ba0654b08073d843657 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 16 Jan 2012 22:42:10 +0100 Subject: [PATCH 0145/1359] usb: renesas: silence uninitialized variable report in usbhsg_recip_run_handle() In drivers/usb/renesas_usbhs/mod_gadget.c::usbhsg_recip_run_handle() the Coverity Prevent checker currently flags a warning about possibly uninitialized use of 'ret' i usbhsg_recip_run_handle(). It does this since it assumes we take one of the non-default branches in the switch and then subsequently take the false branch in the 'if (func)' case below. This exact scenario will never happen, but Coverity can't see that for some reason. This patch initializes 'ret' to '0' when it is declared which should shut up this report and won't really hurt - so why not? At least then it's clear that 'ret' is always initialized.. Signed-off-by: Jesper Juhl Signed-off-by: Felipe Balbi --- drivers/usb/renesas_usbhs/mod_gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/renesas_usbhs/mod_gadget.c b/drivers/usb/renesas_usbhs/mod_gadget.c index 528691d5f3e2..7542aa94a462 100644 --- a/drivers/usb/renesas_usbhs/mod_gadget.c +++ b/drivers/usb/renesas_usbhs/mod_gadget.c @@ -425,7 +425,7 @@ static int usbhsg_recip_run_handle(struct usbhs_priv *priv, struct usbhs_pipe *pipe; int recip = ctrl->bRequestType & USB_RECIP_MASK; int nth = le16_to_cpu(ctrl->wIndex) & USB_ENDPOINT_NUMBER_MASK; - int ret; + int ret = 0; int (*func)(struct usbhs_priv *priv, struct usbhsg_uep *uep, struct usb_ctrlrequest *ctrl); char *msg; -- GitLab From a37670b1c0f5dee021e451130653936742233457 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Fri, 13 Jan 2012 15:19:06 -0200 Subject: [PATCH 0146/1359] drivers: usb: otg: Fix dependencies for some OTG drivers Fix the following build warning: warning: (USB_LANGWELL_OTG && FSL_USB2_OTG && USB_MV_OTG) selects USB_OTG which has unmet direct dependencies (USB_SUPPORT && USB && EXPERIMENTAL && USB_SUSPEND) Signed-off-by: Fabio Estevam Signed-off-by: Felipe Balbi --- drivers/usb/otg/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 9105c285f594..76d629345418 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -110,7 +110,7 @@ config AB8500_USB config FSL_USB2_OTG bool "Freescale USB OTG Transceiver Driver" - depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 + depends on USB_EHCI_FSL && USB_GADGET_FSL_USB2 && USB_SUSPEND select USB_OTG select USB_OTG_UTILS help @@ -118,7 +118,7 @@ config FSL_USB2_OTG config USB_MV_OTG tristate "Marvell USB OTG support" - depends on USB_MV_UDC + depends on USB_MV_UDC && USB_SUSPEND select USB_OTG select USB_OTG_UTILS help -- GitLab From 118d63f7f84cd400ba537f5d318c035c95c6776d Mon Sep 17 00:00:00 2001 From: Peter Chen Date: Wed, 11 Jan 2012 13:39:07 +0800 Subject: [PATCH 0147/1359] usb: gadget: fsl_udc: fix the usage of udc->max_ep The max_ep is the number of endpoint * 2. But in dtd_complete_irq, it does again * 2, it will deference wrong memory after scanning max_ep - 1. The another similar problem is at USB_REQ_SET_FEATURE (the pipe number should be 0 and max_ep - 1). Signed-off-by: Peter Chen Signed-off-by: Matthieu castet Signed-off-by: Felipe Balbi --- drivers/usb/gadget/fsl_udc_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/gadget/fsl_udc_core.c b/drivers/usb/gadget/fsl_udc_core.c index d7ea6c076ce9..b04712f19f1e 100644 --- a/drivers/usb/gadget/fsl_udc_core.c +++ b/drivers/usb/gadget/fsl_udc_core.c @@ -1430,7 +1430,7 @@ static void setup_received_irq(struct fsl_udc *udc, int pipe = get_pipe_by_windex(wIndex); struct fsl_ep *ep; - if (wValue != 0 || wLength != 0 || pipe > udc->max_ep) + if (wValue != 0 || wLength != 0 || pipe >= udc->max_ep) break; ep = get_ep_by_pipe(udc, pipe); @@ -1673,7 +1673,7 @@ static void dtd_complete_irq(struct fsl_udc *udc) if (!bit_pos) return; - for (i = 0; i < udc->max_ep * 2; i++) { + for (i = 0; i < udc->max_ep; i++) { ep_num = i >> 1; direction = i % 2; -- GitLab From c74c930082fd407e3b9e503d855d78777a8e5a84 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Wed, 11 Jan 2012 21:42:44 +0100 Subject: [PATCH 0148/1359] usb: gadget: check for streams only for SS udcs Currently the UASP gadget fails to bind on an UDC which does not provide stream support. This is true for all udc in tree except for dummy and dwc3 since they don't support SuperSpeed. There is no need to test for the availability of stream support on those UDCs because we will never even try to use them. I think it is sane to assume that StreamSupport is always available on SuperSpeed since it is one of the key features. The host side will only allocate on SS so this part is also fine. Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/gadget/epautoconf.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index 753aa0683ac1..e0e6375ef5dd 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -126,7 +126,7 @@ ep_matches ( * descriptor and see if the EP matches it */ if (usb_endpoint_xfer_bulk(desc)) { - if (ep_comp) { + if (ep_comp && gadget->max_speed >= USB_SPEED_SUPER) { num_req_streams = ep_comp->bmAttributes & 0x1f; if (num_req_streams > ep->max_streams) return 0; -- GitLab From 4b5203f1883e2dd49273e9f91235c36a0708aad1 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 12 Jan 2012 16:09:15 -0200 Subject: [PATCH 0149/1359] usb: gadget: f_mass_storage: Use "bool" instead of "int" in fsg_module_parameters MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following build warnings: CC [M] drivers/usb/gadget/acm_ms.o drivers/usb/gadget/acm_ms.c: In function ‘__check_ro’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type drivers/usb/gadget/acm_ms.c: In function ‘__check_removable’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type drivers/usb/gadget/acm_ms.c: In function ‘__check_cdrom’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type drivers/usb/gadget/acm_ms.c: In function ‘__check_nofua’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type drivers/usb/gadget/acm_ms.c: In function ‘__check_stall’: drivers/usb/gadget/acm_ms.c:119: warning: return from incompatible pointer type CC [M] drivers/usb/gadget/mass_storage.o drivers/usb/gadget/mass_storage.c: In function ‘__check_ro’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type drivers/usb/gadget/mass_storage.c: In function ‘__check_removable’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type drivers/usb/gadget/mass_storage.c: In function ‘__check_cdrom’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type drivers/usb/gadget/mass_storage.c: In function ‘__check_nofua’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type drivers/usb/gadget/mass_storage.c: In function ‘__check_stall’: drivers/usb/gadget/mass_storage.c:94: warning: return from incompatible pointer type Declare the fsg_module_parameters fields as "bool" so that they can match the types passed in FSG_MODULE_PARAM_ARRAY macro. Since commit 493c90ef (module_param: check that bool parameters really are bool.), moduleparam.h was changed in a way that the "bool" parameter type now really requires "bool" type and no longer allows "unsigned int". Signed-off-by: Fabio Estevam Acked-by: Michal Nazarewicz Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_mass_storage.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index 6353eca1e852..ee8ceec01560 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -3123,15 +3123,15 @@ fsg_add(struct usb_composite_dev *cdev, struct usb_configuration *c, struct fsg_module_parameters { char *file[FSG_MAX_LUNS]; - int ro[FSG_MAX_LUNS]; - int removable[FSG_MAX_LUNS]; - int cdrom[FSG_MAX_LUNS]; - int nofua[FSG_MAX_LUNS]; + bool ro[FSG_MAX_LUNS]; + bool removable[FSG_MAX_LUNS]; + bool cdrom[FSG_MAX_LUNS]; + bool nofua[FSG_MAX_LUNS]; unsigned int file_count, ro_count, removable_count, cdrom_count; unsigned int nofua_count; unsigned int luns; /* nluns */ - int stall; /* can_stall */ + bool stall; /* can_stall */ }; #define _FSG_MODULE_PARAM_ARRAY(prefix, params, name, type, desc) \ -- GitLab From 24307caef4950e42e7875a901856ed8816c4679c Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 12 Jan 2012 15:22:45 +0200 Subject: [PATCH 0150/1359] usb: musb: fix shutdown while usb gadget is in use If we shutdown without stopping the gadget first or removing the cable, gadget manages to configure itself again: root@pandora /root# poweroff The system is going down NOW! Requesting system poweroff [ 47.714385] musb-hm halted. [ 48.120697] gadget: suspend [ 48.123748] gadget: reset config [ 48.127227] gadget: ecm deactivated [ 48.130981] usb0: gether_disconnect [ 48.281799] gadget: high-speed config #1: CDC Ethernet (ECM) [ 48.287872] gadget: init ecm [ 48.290985] gadget: notify connect false [ 48.295288] gadget: notify speed 425984000 This is not only unwanted, it's also happening on half-unitialized state, after musb_shutdown() has returned, which sometimes causes hardware to fail to work after reboot. Let's better properly stop gadget on shutdown too. This patch moves musb_gadget_cleanup out of musb_free(), which has 2 callsites: probe error path and musb_remove. On probe error path it was superflous since musb_gadget_cleanup is called explicitly there, and musb_remove() calls musb_shutdown(), so cleanup will get called as before. Signed-off-by: Grazvydas Ignotas Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 56cf0243979e..3d11cf64ebd1 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -981,6 +981,9 @@ static void musb_shutdown(struct platform_device *pdev) unsigned long flags; pm_runtime_get_sync(musb->controller); + + musb_gadget_cleanup(musb); + spin_lock_irqsave(&musb->lock, flags); musb_platform_disable(musb); musb_generic_disable(musb); @@ -1827,8 +1830,6 @@ static void musb_free(struct musb *musb) sysfs_remove_group(&musb->controller->kobj, &musb_attr_group); #endif - musb_gadget_cleanup(musb); - if (musb->nIrq >= 0) { if (musb->irq_wake) disable_irq_wake(musb->nIrq); -- GitLab From c09d6b51d78f5ad33417dbac9b479bd6709f9f25 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Tue, 24 Jan 2012 12:44:34 +0100 Subject: [PATCH 0151/1359] usb: dwc3: unmap the proper number of sg entries num_sgs contains the number of sgs assigned by the gadget. num_mapped_sgs contains the number of mapped sgs which may differ from the gadget's values. For dma_unmap_sg() we have to provide the value which was returned by dma_map_sg(). Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index a696bde53222..064b6e2cd411 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -101,7 +101,7 @@ void dwc3_unmap_buffer_from_dma(struct dwc3_request *req) if (req->request.num_mapped_sgs) { req->request.dma = DMA_ADDR_INVALID; dma_unmap_sg(dwc->dev, req->request.sg, - req->request.num_sgs, + req->request.num_mapped_sgs, req->direction ? DMA_TO_DEVICE : DMA_FROM_DEVICE); -- GitLab From 4d20bb1d5fe1afbdbff951c06cd3d3654fa5ceed Mon Sep 17 00:00:00 2001 From: Raymond Yau Date: Tue, 17 Jan 2012 11:41:47 +0800 Subject: [PATCH 0152/1359] ALSA: ymfpci - Don't create invalid PCM & mixers when AC97 doesn't support - check SDAC bit of AC97 primary codec when create "rear" device 3, "4ch" device 2 and "4ch Duplication" switch as the card need a four channels AC97 codec to support surround40. Signed-off-by: Raymond Yau Signed-off-by: Takashi Iwai --- sound/pci/ymfpci/ymfpci.c | 21 +++++++++++++-------- sound/pci/ymfpci/ymfpci_main.c | 21 ++++++++++++++------- 2 files changed, 27 insertions(+), 15 deletions(-) diff --git a/sound/pci/ymfpci/ymfpci.c b/sound/pci/ymfpci/ymfpci.c index e57b89e8aa89..94ab728f5ca8 100644 --- a/sound/pci/ymfpci/ymfpci.c +++ b/sound/pci/ymfpci/ymfpci.c @@ -286,17 +286,22 @@ static int __devinit snd_card_ymfpci_probe(struct pci_dev *pci, snd_card_free(card); return err; } - if ((err = snd_ymfpci_pcm_4ch(chip, 2, NULL)) < 0) { + err = snd_ymfpci_mixer(chip, rear_switch[dev]); + if (err < 0) { snd_card_free(card); return err; } - if ((err = snd_ymfpci_pcm2(chip, 3, NULL)) < 0) { - snd_card_free(card); - return err; - } - if ((err = snd_ymfpci_mixer(chip, rear_switch[dev])) < 0) { - snd_card_free(card); - return err; + if (chip->ac97->ext_id & AC97_EI_SDAC) { + err = snd_ymfpci_pcm_4ch(chip, 2, NULL); + if (err < 0) { + snd_card_free(card); + return err; + } + err = snd_ymfpci_pcm2(chip, 3, NULL); + if (err < 0) { + snd_card_free(card); + return err; + } } if ((err = snd_ymfpci_timer(chip, 0)) < 0) { snd_card_free(card); diff --git a/sound/pci/ymfpci/ymfpci_main.c b/sound/pci/ymfpci/ymfpci_main.c index 03ee4e365311..12a9a2b03387 100644 --- a/sound/pci/ymfpci/ymfpci_main.c +++ b/sound/pci/ymfpci/ymfpci_main.c @@ -1614,6 +1614,14 @@ static int snd_ymfpci_put_dup4ch(struct snd_kcontrol *kcontrol, struct snd_ctl_e return change; } +static struct snd_kcontrol_new snd_ymfpci_dup4ch __devinitdata = { + .iface = SNDRV_CTL_ELEM_IFACE_MIXER, + .name = "4ch Duplication", + .access = SNDRV_CTL_ELEM_ACCESS_READWRITE, + .info = snd_ymfpci_info_dup4ch, + .get = snd_ymfpci_get_dup4ch, + .put = snd_ymfpci_put_dup4ch, +}; static struct snd_kcontrol_new snd_ymfpci_controls[] __devinitdata = { { @@ -1642,13 +1650,6 @@ YMFPCI_DOUBLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,VOLUME), 1, YDSXGR_SPDIFLOOPVOL), YMFPCI_SINGLE(SNDRV_CTL_NAME_IEC958("",PLAYBACK,SWITCH), 0, YDSXGR_SPDIFOUTCTRL, 0), YMFPCI_SINGLE(SNDRV_CTL_NAME_IEC958("",CAPTURE,SWITCH), 0, YDSXGR_SPDIFINCTRL, 0), YMFPCI_SINGLE(SNDRV_CTL_NAME_IEC958("Loop",NONE,NONE), 0, YDSXGR_SPDIFINCTRL, 4), -{ - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "4ch Duplication", - .info = snd_ymfpci_info_dup4ch, - .get = snd_ymfpci_get_dup4ch, - .put = snd_ymfpci_put_dup4ch, -}, }; @@ -1838,6 +1839,12 @@ int __devinit snd_ymfpci_mixer(struct snd_ymfpci *chip, int rear_switch) if ((err = snd_ctl_add(chip->card, snd_ctl_new1(&snd_ymfpci_controls[idx], chip))) < 0) return err; } + if (chip->ac97->ext_id & AC97_EI_SDAC) { + kctl = snd_ctl_new1(&snd_ymfpci_dup4ch, chip); + err = snd_ctl_add(chip->card, kctl); + if (err < 0) + return err; + } /* add S/PDIF control */ if (snd_BUG_ON(!chip->pcm_spdif)) -- GitLab From 769fab2a41da4bd3c59eee38f47d6d5405738fe0 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 23 Jan 2012 21:02:57 +0100 Subject: [PATCH 0153/1359] ALSA: Fix memory leak on error in snd_compr_set_params() If copy_from_user() does not return 0 we'll leak the memory we allocated for 'params' when that variable goes out of scope. Also a small CodingStyle cleanup: Use braces on both branches of if/else when one branch needs it. Signed-off-by: Jesper Juhl Acked-by: Vinod Koul Signed-off-by: Takashi Iwai --- sound/core/compress_offload.c | 13 ++++++++----- 1 file changed, 8 insertions(+), 5 deletions(-) diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c index dac3633507c9..a68aed7fce02 100644 --- a/sound/core/compress_offload.c +++ b/sound/core/compress_offload.c @@ -441,19 +441,22 @@ snd_compr_set_params(struct snd_compr_stream *stream, unsigned long arg) params = kmalloc(sizeof(*params), GFP_KERNEL); if (!params) return -ENOMEM; - if (copy_from_user(params, (void __user *)arg, sizeof(*params))) - return -EFAULT; + if (copy_from_user(params, (void __user *)arg, sizeof(*params))) { + retval = -EFAULT; + goto out; + } retval = snd_compr_allocate_buffer(stream, params); if (retval) { - kfree(params); - return -ENOMEM; + retval = -ENOMEM; + goto out; } retval = stream->ops->set_params(stream, params); if (retval) goto out; stream->runtime->state = SNDRV_PCM_STATE_SETUP; - } else + } else { return -EPERM; + } out: kfree(params); return retval; -- GitLab From 803ab977618eae2b292cda0a97eed75f42250ddf Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 24 Jan 2012 11:39:22 +0300 Subject: [PATCH 0154/1359] cifs: NULL dereference on allocation failure We should just return directly here, the goto causes a NULL dereference. Signed-off-by: Dan Carpenter Reviewed-by: Jeff Layton Signed-off-by: Steve French --- fs/cifs/connect.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 986709a8d903..026d6464335b 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -3857,10 +3857,8 @@ cifs_construct_tcon(struct cifs_sb_info *cifs_sb, uid_t fsuid) struct smb_vol *vol_info; vol_info = kzalloc(sizeof(*vol_info), GFP_KERNEL); - if (vol_info == NULL) { - tcon = ERR_PTR(-ENOMEM); - goto out; - } + if (vol_info == NULL) + return ERR_PTR(-ENOMEM); vol_info->local_nls = cifs_sb->local_nls; vol_info->linux_uid = fsuid; -- GitLab From 7a7546b377bdaa25ac77f33d9433c59f259b9688 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Mon, 23 Jan 2012 19:32:25 +0000 Subject: [PATCH 0155/1359] x86: xen: size struct xen_spinlock to always fit in arch_spinlock_t If NR_CPUS < 256 then arch_spinlock_t is only 16 bits wide but struct xen_spinlock is 32 bits. When a spin lock is contended and xl->spinners is modified the two bytes immediately after the spin lock would be corrupted. This is a regression caused by 84eb950db13ca40a0572ce9957e14723500943d6 (x86, ticketlock: Clean up types and accessors) which reduced the size of arch_spinlock_t. Fix this by making xl->spinners a u8 if NR_CPUS < 256. A BUILD_BUG_ON() is also added to check the sizes of the two structures are compatible. In many cases this was not noticable as there would often be padding bytes after the lock (e.g., if any of CONFIG_GENERIC_LOCKBREAK, CONFIG_DEBUG_SPINLOCK, or CONFIG_DEBUG_LOCK_ALLOC were enabled). The bnx2 driver is affected. In struct bnx2, phy_lock and indirect_lock may have no padding after them. Contention on phy_lock would corrupt indirect_lock making it appear locked and the driver would deadlock. Signed-off-by: David Vrabel Signed-off-by: Jeremy Fitzhardinge Acked-by: Ian Campbell CC: stable@kernel.org #only 3.2 Signed-off-by: Konrad Rzeszutek Wilk --- arch/x86/xen/spinlock.c | 27 ++++++++++++++++++++++----- 1 file changed, 22 insertions(+), 5 deletions(-) diff --git a/arch/x86/xen/spinlock.c b/arch/x86/xen/spinlock.c index cc9b1e182fcf..d69cc6c3f808 100644 --- a/arch/x86/xen/spinlock.c +++ b/arch/x86/xen/spinlock.c @@ -116,9 +116,26 @@ static inline void spin_time_accum_blocked(u64 start) } #endif /* CONFIG_XEN_DEBUG_FS */ +/* + * Size struct xen_spinlock so it's the same as arch_spinlock_t. + */ +#if NR_CPUS < 256 +typedef u8 xen_spinners_t; +# define inc_spinners(xl) \ + asm(LOCK_PREFIX " incb %0" : "+m" ((xl)->spinners) : : "memory"); +# define dec_spinners(xl) \ + asm(LOCK_PREFIX " decb %0" : "+m" ((xl)->spinners) : : "memory"); +#else +typedef u16 xen_spinners_t; +# define inc_spinners(xl) \ + asm(LOCK_PREFIX " incw %0" : "+m" ((xl)->spinners) : : "memory"); +# define dec_spinners(xl) \ + asm(LOCK_PREFIX " decw %0" : "+m" ((xl)->spinners) : : "memory"); +#endif + struct xen_spinlock { unsigned char lock; /* 0 -> free; 1 -> locked */ - unsigned short spinners; /* count of waiting cpus */ + xen_spinners_t spinners; /* count of waiting cpus */ }; static int xen_spin_is_locked(struct arch_spinlock *lock) @@ -164,8 +181,7 @@ static inline struct xen_spinlock *spinning_lock(struct xen_spinlock *xl) wmb(); /* set lock of interest before count */ - asm(LOCK_PREFIX " incw %0" - : "+m" (xl->spinners) : : "memory"); + inc_spinners(xl); return prev; } @@ -176,8 +192,7 @@ static inline struct xen_spinlock *spinning_lock(struct xen_spinlock *xl) */ static inline void unspinning_lock(struct xen_spinlock *xl, struct xen_spinlock *prev) { - asm(LOCK_PREFIX " decw %0" - : "+m" (xl->spinners) : : "memory"); + dec_spinners(xl); wmb(); /* decrement count before restoring lock */ __this_cpu_write(lock_spinners, prev); } @@ -373,6 +388,8 @@ void xen_uninit_lock_cpu(int cpu) void __init xen_init_spinlocks(void) { + BUILD_BUG_ON(sizeof(struct xen_spinlock) > sizeof(arch_spinlock_t)); + pv_lock_ops.spin_is_locked = xen_spin_is_locked; pv_lock_ops.spin_is_contended = xen_spin_is_contended; pv_lock_ops.spin_lock = xen_spin_lock; -- GitLab From 1a5e29fc2b90daf71a60329c29a1886fd126169a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 21 Jan 2012 11:02:51 -0800 Subject: [PATCH 0156/1359] kernel-doc: fix new warnings in device.h Fix new kernel-doc warnings: Warning(include/linux/device.h:299): No description found for parameter 'name' Warning(include/linux/device.h:299): No description found for parameter 'subsys' Warning(include/linux/device.h:299): No description found for parameter 'node' Warning(include/linux/device.h:299): No description found for parameter 'add_dev' Warning(include/linux/device.h:299): No description found for parameter 'remove_dev' Warning(include/linux/device.h:685): No description found for parameter 'id' Warning(include/linux/device.h:1009): No description found for parameter '__driver' Warning(include/linux/device.h:1009): No description found for parameter '__register' Warning(include/linux/device.h:1009): No description found for parameter '__unregister' Signed-off-by: Randy Dunlap Cc: Lars-Peter Clausen Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- include/linux/device.h | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-) diff --git a/include/linux/device.h b/include/linux/device.h index 5b3adb8f9588..b63fb393aa58 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -279,11 +279,11 @@ struct device *driver_find_device(struct device_driver *drv, /** * struct subsys_interface - interfaces to device functions - * @name name of the device function - * @subsystem subsytem of the devices to attach to - * @node the list of functions registered at the subsystem - * @add device hookup to device function handler - * @remove device hookup to device function handler + * @name: name of the device function + * @subsys: subsytem of the devices to attach to + * @node: the list of functions registered at the subsystem + * @add_dev: device hookup to device function handler + * @remove_dev: device hookup to device function handler * * Simple interfaces attached to a subsystem. Multiple interfaces can * attach to a subsystem and its devices. Unlike drivers, they do not @@ -612,6 +612,7 @@ struct device_dma_parameters { * @archdata: For arch-specific additions. * @of_node: Associated device tree node. * @devt: For creating the sysfs "dev". + * @id: device instance * @devres_lock: Spinlock to protect the resource of the device. * @devres_head: The resources list of the device. * @knode_class: The node used to add the device to the class list. @@ -1003,6 +1004,10 @@ extern long sysfs_deprecated; * Each module may only use this macro once, and calling it replaces * module_init() and module_exit(). * + * @__driver: driver name + * @__register: register function for this driver type + * @__unregister: unregister function for this driver type + * * Use this macro to construct bus specific macros for registering * drivers, and do not use it on its own. */ -- GitLab From 0863b04d1578879173aacbc5c7be749fccb70809 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 21 Jan 2012 11:02:42 -0800 Subject: [PATCH 0157/1359] kernel-doc: fix new warnings in debugfs Fix new kernel-doc warnings: Warning(fs/debugfs/file.c:556): No description found for parameter 'nregs' Warning(fs/debugfs/file.c:556): Excess function parameter 'mregs' description in 'debugfs_print_regs32' Signed-off-by: Randy Dunlap Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- fs/debugfs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c index f65d4455c5e5..ef023eef0464 100644 --- a/fs/debugfs/file.c +++ b/fs/debugfs/file.c @@ -540,7 +540,7 @@ EXPORT_SYMBOL_GPL(debugfs_create_blob); * debugfs_print_regs32 - use seq_print to describe a set of registers * @s: the seq_file structure being used to generate output * @regs: an array if struct debugfs_reg32 structures - * @mregs: the length of the above array + * @nregs: the length of the above array * @base: the base address to be used in reading the registers * @prefix: a string to be prefixed to every output line * -- GitLab From 4f4ffe52e1e5ddb9708fe075aaef4424f1fb744a Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 21 Jan 2012 11:02:28 -0800 Subject: [PATCH 0158/1359] kernel-doc: fix new warnings in driver-core Fix new kernel-doc warnings: Warning(drivers/base/bus.c:925): No description found for parameter 'key' Warning(drivers/base/bus.c:1241): No description found for parameter 'subsys' Warning(drivers/base/bus.c:1241): No description found for parameter 'groups' Signed-off-by: Randy Dunlap Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- drivers/base/bus.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/base/bus.c b/drivers/base/bus.c index 99dc5921e1dd..40fb12288ce2 100644 --- a/drivers/base/bus.c +++ b/drivers/base/bus.c @@ -915,9 +915,10 @@ static BUS_ATTR(uevent, S_IWUSR, NULL, bus_uevent_store); /** * __bus_register - register a driver-core subsystem - * @bus: bus. + * @bus: bus to register + * @key: lockdep class key * - * Once we have that, we registered the bus with the kobject + * Once we have that, we register the bus with the kobject * infrastructure, then register the children subsystems it has: * the devices and drivers that belong to the subsystem. */ @@ -1220,8 +1221,8 @@ static void system_root_device_release(struct device *dev) } /** * subsys_system_register - register a subsystem at /sys/devices/system/ - * @subsys - system subsystem - * @groups - default attributes for the root device + * @subsys: system subsystem + * @groups: default attributes for the root device * * All 'system' subsystems have a /sys/devices/system/ root device * with the name of the subsystem. The root device can carry subsystem- -- GitLab From b10d5efdf7892d18b3b7d899edce2c8d9b80aea9 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 17 Jan 2012 11:39:00 -0500 Subject: [PATCH 0159/1359] Documentation update for the driver model core This patch (as1509) documents two important points regarding the use of device structures in the driver model: Structures must be initialized to all 0's before they are passed to device_initialize(). Structures must not be passed to device_add() or device_register() more than once. Although these restrictions have applied ever since the driver model was first created, they have not been mentioned anywhere. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/base/core.c b/drivers/base/core.c index 4a67cc0c8b37..ad29e928baaa 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -632,6 +632,11 @@ static void klist_children_put(struct klist_node *n) * may be used for reference counting of @dev after calling this * function. * + * All fields in @dev must be initialized by the caller to 0, except + * for those explicitly set to some other value. The simplest + * approach is to use kzalloc() to allocate the structure containing + * @dev. + * * NOTE: Use put_device() to give up your reference instead of freeing * @dev directly once you have called this function. */ @@ -930,6 +935,13 @@ int device_private_init(struct device *dev) * to the global and sibling lists for the device, then * adds it to the other relevant subsystems of the driver model. * + * Do not call this routine or device_register() more than once for + * any device structure. The driver model core is not designed to work + * with devices that get unregistered and then spring back to life. + * (Among other things, it's very hard to guarantee that all references + * to the previous incarnation of @dev have been dropped.) Allocate + * and register a fresh new struct device instead. + * * NOTE: _Never_ directly free @dev after calling this function, even * if it returned an error! Always use put_device() to give up your * reference instead. @@ -1090,6 +1102,9 @@ name_error: * have a clearly defined need to use and refcount the device * before it is added to the hierarchy. * + * For more information, see the kerneldoc for device_initialize() + * and device_add(). + * * NOTE: _Never_ directly free @dev after calling this function, even * if it returned an error! Always use put_device() to give up the * reference initialized in this function instead. -- GitLab From 543f43ce87c45220a8ffbff5ff4b60122499ce5f Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sun, 15 Jan 2012 13:31:46 +0100 Subject: [PATCH 0160/1359] Documentation: devres: add allocation functions to list of supported calls Signed-off-by: Wolfram Sang Acked-by: Grant Likely Acked-by: Tejun Heo Cc: Randy Dunlap Cc: Greg KH Signed-off-by: Greg Kroah-Hartman --- Documentation/driver-model/devres.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 10c64c8a13d4..41c0c5d1ba14 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -233,6 +233,10 @@ certainly invest a bit more effort into libata core layer). 6. List of managed interfaces ----------------------------- +MEM + devm_kzalloc() + devm_kfree() + IO region devm_request_region() devm_request_mem_region() -- GitLab From 268863f43629ef88763400d0cae4a66c754a0d23 Mon Sep 17 00:00:00 2001 From: majianpeng Date: Wed, 11 Jan 2012 15:12:06 +0000 Subject: [PATCH 0161/1359] base/core.c:fix typo in comment in function device_add Signed-off-by: majianpeng Signed-off-by: Greg Kroah-Hartman --- drivers/base/core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/base/core.c b/drivers/base/core.c index ad29e928baaa..74dda4f697f9 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -1034,7 +1034,7 @@ int device_add(struct device *dev) device_pm_add(dev); /* Notify clients of device addition. This call must come - * after dpm_sysf_add() and before kobject_uevent(). + * after dpm_sysfs_add() and before kobject_uevent(). */ if (dev->bus) blocking_notifier_call_chain(&dev->bus->p->bus_notifier, -- GitLab From 8381b5e88a19b780f19fc52b7dd67f2b05d07dca Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Mon, 23 Jan 2012 07:36:04 -0800 Subject: [PATCH 0162/1359] stable: update documentation to ask for kernel version It would save me an email round-trip asking which stable tree(s) that a patch should be applied to, so document that the tree number should be specified in the email request. Reported-by: Tomoya MORINAGA Signed-off-by: Greg Kroah-Hartman --- Documentation/stable_kernel_rules.txt | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt index 21fd05c28e73..f0ab5cf28fca 100644 --- a/Documentation/stable_kernel_rules.txt +++ b/Documentation/stable_kernel_rules.txt @@ -25,7 +25,8 @@ Procedure for submitting patches to the -stable tree: - Send the patch, after verifying that it follows the above rules, to stable@vger.kernel.org. You must note the upstream commit ID in the - changelog of your submission. + changelog of your submission, as well as the kernel version you wish + it to be applied to. - To have the patch automatically included in the stable tree, add the tag Cc: stable@vger.kernel.org in the sign-off area. Once the patch is merged it will be applied to -- GitLab From 55305afc30529143bdb5928b2154dccdf073acd5 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 10 Jan 2012 15:43:08 -0800 Subject: [PATCH 0163/1359] drivers/usb/misc/emi26.c & emi62.c: fix warnings drivers/usb/misc/emi26.c:40: warning: 'emi26_init' declared 'static' but never defined drivers/usb/misc/emi26.c:41: warning: 'emi26_exit' declared 'static' but never defined drivers/usb/misc/emi62.c:49: warning: 'emi62_init' declared 'static' but never defined drivers/usb/misc/emi62.c:50: warning: 'emi62_exit' declared 'static' but never defined Signed-off-by: Andrew Morton Signed-off-by: Paul Gortmaker Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/emi26.c | 3 --- drivers/usb/misc/emi62.c | 3 --- 2 files changed, 6 deletions(-) diff --git a/drivers/usb/misc/emi26.c b/drivers/usb/misc/emi26.c index d9b6a0355443..da97dcec1f32 100644 --- a/drivers/usb/misc/emi26.c +++ b/drivers/usb/misc/emi26.c @@ -37,9 +37,6 @@ static int emi26_set_reset(struct usb_device *dev, unsigned char reset_bit); static int emi26_load_firmware (struct usb_device *dev); static int emi26_probe(struct usb_interface *intf, const struct usb_device_id *id); static void emi26_disconnect(struct usb_interface *intf); -static int __init emi26_init (void); -static void __exit emi26_exit (void); - /* thanks to drivers/usb/serial/keyspan_pda.c code */ static int emi26_writememory (struct usb_device *dev, int address, diff --git a/drivers/usb/misc/emi62.c b/drivers/usb/misc/emi62.c index 9f39062ebb08..4e0f167a6c4e 100644 --- a/drivers/usb/misc/emi62.c +++ b/drivers/usb/misc/emi62.c @@ -46,9 +46,6 @@ static int emi62_set_reset(struct usb_device *dev, unsigned char reset_bit); static int emi62_load_firmware (struct usb_device *dev); static int emi62_probe(struct usb_interface *intf, const struct usb_device_id *id); static void emi62_disconnect(struct usb_interface *intf); -static int __init emi62_init (void); -static void __exit emi62_exit (void); - /* thanks to drivers/usb/serial/keyspan_pda.c code */ static int emi62_writememory(struct usb_device *dev, int address, -- GitLab From eb833a9e0972f60beb4ab8104ad7ef6bf30f02fc Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Tue, 10 Jan 2012 23:33:37 +0100 Subject: [PATCH 0164/1359] USB: ftdi_sio: fix TIOCSSERIAL baud_base handling MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Return EINVAL if new baud_base does not match the current one. The baud_base is device specific and can not be changed. This restores the old (pre-2005) behaviour which was changed due to a misunderstanding regarding this fact (see https://lkml.org/lkml/2005/1/20/84). Reported-by: Torbjörn Lofterud Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 01b6404df395..ff5a8e172a34 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1333,8 +1333,7 @@ static int set_serial_info(struct tty_struct *tty, goto check_and_exit; } - if ((new_serial.baud_base != priv->baud_base) && - (new_serial.baud_base < 9600)) { + if (new_serial.baud_base != priv->baud_base) { mutex_unlock(&priv->cfg_lock); return -EINVAL; } -- GitLab From 108e02b12921078a59dcacd048079ece48a4a983 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Wed, 18 Jan 2012 01:46:00 +0100 Subject: [PATCH 0165/1359] USB: ftdi_sio: fix initial baud rate Fix regression introduced by commit b1ffb4c851f1 ("USB: Fix Corruption issue in USB ftdi driver ftdi_sio.c") which caused the termios settings to no longer be initialised at open. Consequently it was no longer possible to set the port to the default speed of 9600 baud without first changing to another baud rate and back again. Reported-by: Roland Ramthun Cc: stable Signed-off-by: Johan Hovold Tested-by: Roland Ramthun Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index ff5a8e172a34..7dbdf1e7684d 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1823,6 +1823,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port) static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) { + struct ktermios dummy; struct usb_device *dev = port->serial->dev; struct ftdi_private *priv = usb_get_serial_port_data(port); int result; @@ -1841,8 +1842,10 @@ static int ftdi_open(struct tty_struct *tty, struct usb_serial_port *port) This is same behaviour as serial.c/rs_open() - Kuba */ /* ftdi_set_termios will send usb control messages */ - if (tty) - ftdi_set_termios(tty, port, tty->termios); + if (tty) { + memset(&dummy, 0, sizeof(dummy)); + ftdi_set_termios(tty, port, &dummy); + } /* Start reading from the device */ result = usb_serial_generic_open(tty, port); -- GitLab From 55f13aeae0346f0c89bfface91ad9a97653dc433 Mon Sep 17 00:00:00 2001 From: Peter Korsgaard Date: Wed, 18 Jan 2012 23:43:45 +0100 Subject: [PATCH 0166/1359] USB: ftdi_sio: add PID for TI XDS100v2 / BeagleBone A3 Port A for JTAG, port B for serial. Signed-off-by: Peter Korsgaard Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio_ids.h | 7 +++++++ 2 files changed, 9 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7dbdf1e7684d..5f42757930df 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -805,6 +805,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, TI_XDS100V2_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(FTDI_VID, HAMEG_HO820_PID) }, { USB_DEVICE(FTDI_VID, HAMEG_HO720_PID) }, { USB_DEVICE(FTDI_VID, HAMEG_HO730_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index df1d7da933ec..f35ddef72e04 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -39,6 +39,13 @@ /* www.candapter.com Ewert Energy Systems CANdapter device */ #define FTDI_CANDAPTER_PID 0x9F80 /* Product Id */ +/* + * Texas Instruments XDS100v2 JTAG / BeagleBone A3 + * http://processors.wiki.ti.com/index.php/XDS100 + * http://beagleboard.org/bone + */ +#define TI_XDS100V2_PID 0xa6d0 + #define FTDI_NXTCAM_PID 0xABB8 /* NXTCam for Mindstorms NXT */ /* US Interface Navigator (http://www.usinterface.com/) */ -- GitLab From fc216ec363f4d174932df90bbf35c77d0540e561 Mon Sep 17 00:00:00 2001 From: Peter Naulls Date: Tue, 17 Jan 2012 18:27:09 -0800 Subject: [PATCH 0167/1359] USB: serial: ftdi additional IDs I tested this against 2.6.39 in the Ubuntu kernel, however I see the IDs are not in latest 3.2 git. This adds IDs for the FTDI controller in the Rainforest Automation Zigbee dongle. Signed-off-by: Peter Naulls Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5f42757930df..104aff536b1e 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -843,6 +843,7 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(ST_VID, ST_STMCLT1030_PID), .driver_info = (kernel_ulong_t)&ftdi_stmclite_quirk }, + { USB_DEVICE(FTDI_VID, FTDI_RF_R106) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index f35ddef72e04..09237ffe2f33 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1175,3 +1175,9 @@ */ /* TagTracer MIFARE*/ #define FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID 0xF7C0 + +/* + * Rainforest Automation + */ +/* ZigBee controller */ +#define FTDI_RF_R106 0x8A28 -- GitLab From 9bef3d4197379a995fa80f81950bbbf8d32e9e8b Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 5 Jan 2012 18:21:43 -0500 Subject: [PATCH 0168/1359] serial: group all the 8250 related code together The drivers/tty/serial dir is already getting rather busy. Relocate the 8250 related drivers to their own subdir to reduce the clutter. Note that sunsu.c is not included in this move -- it is 8250-like hardware, but it does not use any of the existing infrastructure -- and does not depend on SERIAL_8250. Signed-off-by: Paul Gortmaker Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/{ => 8250}/8250.c | 0 drivers/tty/serial/{ => 8250}/8250.h | 0 drivers/tty/serial/{ => 8250}/8250_accent.c | 0 drivers/tty/serial/{ => 8250}/8250_acorn.c | 0 drivers/tty/serial/{ => 8250}/8250_boca.c | 0 drivers/tty/serial/{ => 8250}/8250_dw.c | 0 drivers/tty/serial/{ => 8250}/8250_early.c | 0 .../serial/{ => 8250}/8250_exar_st16c554.c | 0 drivers/tty/serial/{ => 8250}/8250_fourport.c | 0 drivers/tty/serial/{ => 8250}/8250_fsl.c | 0 drivers/tty/serial/{ => 8250}/8250_gsc.c | 0 drivers/tty/serial/{ => 8250}/8250_hp300.c | 0 drivers/tty/serial/{ => 8250}/8250_hub6.c | 0 drivers/tty/serial/{ => 8250}/8250_mca.c | 0 drivers/tty/serial/{ => 8250}/8250_pci.c | 0 drivers/tty/serial/{ => 8250}/8250_pnp.c | 0 drivers/tty/serial/8250/Kconfig | 280 ++++++++++++++++++ drivers/tty/serial/8250/Makefile | 20 ++ drivers/tty/serial/{ => 8250}/m32r_sio.c | 0 drivers/tty/serial/{ => 8250}/m32r_sio.h | 0 drivers/tty/serial/{ => 8250}/m32r_sio_reg.h | 0 drivers/tty/serial/{ => 8250}/serial_cs.c | 0 drivers/tty/serial/Kconfig | 274 +---------------- drivers/tty/serial/Makefile | 19 +- 24 files changed, 304 insertions(+), 289 deletions(-) rename drivers/tty/serial/{ => 8250}/8250.c (100%) rename drivers/tty/serial/{ => 8250}/8250.h (100%) rename drivers/tty/serial/{ => 8250}/8250_accent.c (100%) rename drivers/tty/serial/{ => 8250}/8250_acorn.c (100%) rename drivers/tty/serial/{ => 8250}/8250_boca.c (100%) rename drivers/tty/serial/{ => 8250}/8250_dw.c (100%) rename drivers/tty/serial/{ => 8250}/8250_early.c (100%) rename drivers/tty/serial/{ => 8250}/8250_exar_st16c554.c (100%) rename drivers/tty/serial/{ => 8250}/8250_fourport.c (100%) rename drivers/tty/serial/{ => 8250}/8250_fsl.c (100%) rename drivers/tty/serial/{ => 8250}/8250_gsc.c (100%) rename drivers/tty/serial/{ => 8250}/8250_hp300.c (100%) rename drivers/tty/serial/{ => 8250}/8250_hub6.c (100%) rename drivers/tty/serial/{ => 8250}/8250_mca.c (100%) rename drivers/tty/serial/{ => 8250}/8250_pci.c (100%) rename drivers/tty/serial/{ => 8250}/8250_pnp.c (100%) create mode 100644 drivers/tty/serial/8250/Kconfig create mode 100644 drivers/tty/serial/8250/Makefile rename drivers/tty/serial/{ => 8250}/m32r_sio.c (100%) rename drivers/tty/serial/{ => 8250}/m32r_sio.h (100%) rename drivers/tty/serial/{ => 8250}/m32r_sio_reg.h (100%) rename drivers/tty/serial/{ => 8250}/serial_cs.c (100%) diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250/8250.c similarity index 100% rename from drivers/tty/serial/8250.c rename to drivers/tty/serial/8250/8250.c diff --git a/drivers/tty/serial/8250.h b/drivers/tty/serial/8250/8250.h similarity index 100% rename from drivers/tty/serial/8250.h rename to drivers/tty/serial/8250/8250.h diff --git a/drivers/tty/serial/8250_accent.c b/drivers/tty/serial/8250/8250_accent.c similarity index 100% rename from drivers/tty/serial/8250_accent.c rename to drivers/tty/serial/8250/8250_accent.c diff --git a/drivers/tty/serial/8250_acorn.c b/drivers/tty/serial/8250/8250_acorn.c similarity index 100% rename from drivers/tty/serial/8250_acorn.c rename to drivers/tty/serial/8250/8250_acorn.c diff --git a/drivers/tty/serial/8250_boca.c b/drivers/tty/serial/8250/8250_boca.c similarity index 100% rename from drivers/tty/serial/8250_boca.c rename to drivers/tty/serial/8250/8250_boca.c diff --git a/drivers/tty/serial/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c similarity index 100% rename from drivers/tty/serial/8250_dw.c rename to drivers/tty/serial/8250/8250_dw.c diff --git a/drivers/tty/serial/8250_early.c b/drivers/tty/serial/8250/8250_early.c similarity index 100% rename from drivers/tty/serial/8250_early.c rename to drivers/tty/serial/8250/8250_early.c diff --git a/drivers/tty/serial/8250_exar_st16c554.c b/drivers/tty/serial/8250/8250_exar_st16c554.c similarity index 100% rename from drivers/tty/serial/8250_exar_st16c554.c rename to drivers/tty/serial/8250/8250_exar_st16c554.c diff --git a/drivers/tty/serial/8250_fourport.c b/drivers/tty/serial/8250/8250_fourport.c similarity index 100% rename from drivers/tty/serial/8250_fourport.c rename to drivers/tty/serial/8250/8250_fourport.c diff --git a/drivers/tty/serial/8250_fsl.c b/drivers/tty/serial/8250/8250_fsl.c similarity index 100% rename from drivers/tty/serial/8250_fsl.c rename to drivers/tty/serial/8250/8250_fsl.c diff --git a/drivers/tty/serial/8250_gsc.c b/drivers/tty/serial/8250/8250_gsc.c similarity index 100% rename from drivers/tty/serial/8250_gsc.c rename to drivers/tty/serial/8250/8250_gsc.c diff --git a/drivers/tty/serial/8250_hp300.c b/drivers/tty/serial/8250/8250_hp300.c similarity index 100% rename from drivers/tty/serial/8250_hp300.c rename to drivers/tty/serial/8250/8250_hp300.c diff --git a/drivers/tty/serial/8250_hub6.c b/drivers/tty/serial/8250/8250_hub6.c similarity index 100% rename from drivers/tty/serial/8250_hub6.c rename to drivers/tty/serial/8250/8250_hub6.c diff --git a/drivers/tty/serial/8250_mca.c b/drivers/tty/serial/8250/8250_mca.c similarity index 100% rename from drivers/tty/serial/8250_mca.c rename to drivers/tty/serial/8250/8250_mca.c diff --git a/drivers/tty/serial/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c similarity index 100% rename from drivers/tty/serial/8250_pci.c rename to drivers/tty/serial/8250/8250_pci.c diff --git a/drivers/tty/serial/8250_pnp.c b/drivers/tty/serial/8250/8250_pnp.c similarity index 100% rename from drivers/tty/serial/8250_pnp.c rename to drivers/tty/serial/8250/8250_pnp.c diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig new file mode 100644 index 000000000000..591f8018e7dd --- /dev/null +++ b/drivers/tty/serial/8250/Kconfig @@ -0,0 +1,280 @@ +# +# The 8250/16550 serial drivers. You shouldn't be in this list unless +# you somehow have an implicit or explicit dependency on SERIAL_8250. +# + +config SERIAL_8250 + tristate "8250/16550 and compatible serial support" + select SERIAL_CORE + ---help--- + This selects whether you want to include the driver for the standard + serial ports. The standard answer is Y. People who might say N + here are those that are setting up dedicated Ethernet WWW/FTP + servers, or users that have one of the various bus mice instead of a + serial mouse and don't intend to use their machine's standard serial + port for anything. (Note that the Cyclades and Stallion multi + serial port drivers do not need this driver built in for them to + work.) + + To compile this driver as a module, choose M here: the + module will be called 8250. + [WARNING: Do not compile this driver as a module if you are using + non-standard serial ports, since the configuration information will + be lost when the driver is unloaded. This limitation may be lifted + in the future.] + + BTW1: If you have a mouseman serial mouse which is not recognized by + the X window system, try running gpm first. + + BTW2: If you intend to use a software modem (also called Winmodem) + under Linux, forget it. These modems are crippled and require + proprietary drivers which are only available under Windows. + + Most people will say Y or M here, so that they can use serial mice, + modems and similar devices connecting to the standard serial ports. + +config SERIAL_8250_CONSOLE + bool "Console on 8250/16550 and compatible serial port" + depends on SERIAL_8250=y + select SERIAL_CORE_CONSOLE + ---help--- + If you say Y here, it will be possible to use a serial port as the + system console (the system console is the device which receives all + kernel messages and warnings and which allows logins in single user + mode). This could be useful if some terminal or printer is connected + to that serial port. + + Even if you say Y here, the currently visible virtual console + (/dev/tty0) will still be used as the system console by default, but + you can alter that using a kernel command line option such as + "console=ttyS1". (Try "man bootparam" or see the documentation of + your boot loader (grub or lilo or loadlin) about how to pass options + to the kernel at boot time.) + + If you don't have a VGA card installed and you say Y here, the + kernel will automatically use the first serial line, /dev/ttyS0, as + system console. + + You can set that using a kernel command line option such as + "console=uart8250,io,0x3f8,9600n8" + "console=uart8250,mmio,0xff5e0000,115200n8". + and it will switch to normal serial console when the corresponding + port is ready. + "earlycon=uart8250,io,0x3f8,9600n8" + "earlycon=uart8250,mmio,0xff5e0000,115200n8". + it will not only setup early console. + + If unsure, say N. + +config FIX_EARLYCON_MEM + bool + depends on X86 + default y + +config SERIAL_8250_GSC + tristate + depends on SERIAL_8250 && GSC + default SERIAL_8250 + +config SERIAL_8250_PCI + tristate "8250/16550 PCI device support" if EXPERT + depends on SERIAL_8250 && PCI + default SERIAL_8250 + help + This builds standard PCI serial support. You may be able to + disable this feature if you only need legacy serial support. + Saves about 9K. + +config SERIAL_8250_PNP + tristate "8250/16550 PNP device support" if EXPERT + depends on SERIAL_8250 && PNP + default SERIAL_8250 + help + This builds standard PNP serial support. You may be able to + disable this feature if you only need legacy serial support. + +config SERIAL_8250_HP300 + tristate + depends on SERIAL_8250 && HP300 + default SERIAL_8250 + +config SERIAL_8250_CS + tristate "8250/16550 PCMCIA device support" + depends on PCMCIA && SERIAL_8250 + ---help--- + Say Y here to enable support for 16-bit PCMCIA serial devices, + including serial port cards, modems, and the modem functions of + multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are + credit-card size devices often used with laptops.) + + To compile this driver as a module, choose M here: the + module will be called serial_cs. + + If unsure, say N. + +config SERIAL_8250_NR_UARTS + int "Maximum number of 8250/16550 serial ports" + depends on SERIAL_8250 + default "4" + help + Set this to the number of serial ports you want the driver + to support. This includes any ports discovered via ACPI or + PCI enumeration and any ports that may be added at run-time + via hot-plug, or any ISA multi-port serial cards. + +config SERIAL_8250_RUNTIME_UARTS + int "Number of 8250/16550 serial ports to register at runtime" + depends on SERIAL_8250 + range 0 SERIAL_8250_NR_UARTS + default "4" + help + Set this to the maximum number of serial ports you want + the kernel to register at boot time. This can be overridden + with the module parameter "nr_uarts", or boot-time parameter + 8250.nr_uarts + +config SERIAL_8250_EXTENDED + bool "Extended 8250/16550 serial driver options" + depends on SERIAL_8250 + help + If you wish to use any non-standard features of the standard "dumb" + driver, say Y here. This includes HUB6 support, shared serial + interrupts, special multiport support, support for more than the + four COM 1/2/3/4 boards, etc. + + Note that the answer to this question won't directly affect the + kernel: saying N will just cause the configurator to skip all + the questions about serial driver options. If unsure, say N. + +config SERIAL_8250_MANY_PORTS + bool "Support more than 4 legacy serial ports" + depends on SERIAL_8250_EXTENDED && !IA64 + help + Say Y here if you have dumb serial boards other than the four + standard COM 1/2/3/4 ports. This may happen if you have an AST + FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available + from ), or other custom + serial port hardware which acts similar to standard serial port + hardware. If you only use the standard COM 1/2/3/4 ports, you can + say N here to save some memory. You can also say Y if you have an + "intelligent" multiport card such as Cyclades, Digiboards, etc. + +# +# Multi-port serial cards +# + +config SERIAL_8250_FOURPORT + tristate "Support Fourport cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have an AST FourPort serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_fourport. + +config SERIAL_8250_ACCENT + tristate "Support Accent cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have an Accent Async serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_accent. + +config SERIAL_8250_BOCA + tristate "Support Boca cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have a Boca serial board. Please read the Boca + mini-HOWTO, available from + + To compile this driver as a module, choose M here: the module + will be called 8250_boca. + +config SERIAL_8250_EXAR_ST16C554 + tristate "Support Exar ST16C554/554D Quad UART" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + The Uplogix Envoy TU301 uses this Exar Quad UART. If you are + tinkering with your Envoy TU301, or have a machine with this UART, + say Y here. + + To compile this driver as a module, choose M here: the module + will be called 8250_exar_st16c554. + +config SERIAL_8250_HUB6 + tristate "Support Hub6 cards" + depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS + help + Say Y here if you have a HUB6 serial board. + + To compile this driver as a module, choose M here: the module + will be called 8250_hub6. + +# +# Misc. options/drivers. +# + +config SERIAL_8250_SHARE_IRQ + bool "Support for sharing serial interrupts" + depends on SERIAL_8250_EXTENDED + help + Some serial boards have hardware support which allows multiple dumb + serial ports on the same board to share a single IRQ. To enable + support for this in the serial driver, say Y here. + +config SERIAL_8250_DETECT_IRQ + bool "Autodetect IRQ on standard ports (unsafe)" + depends on SERIAL_8250_EXTENDED + help + Say Y here if you want the kernel to try to guess which IRQ + to use for your serial port. + + This is considered unsafe; it is far better to configure the IRQ in + a boot script using the setserial command. + + If unsure, say N. + +config SERIAL_8250_RSA + bool "Support RSA serial ports" + depends on SERIAL_8250_EXTENDED + help + ::: To be written ::: + +config SERIAL_8250_MCA + tristate "Support 8250-type ports on MCA buses" + depends on SERIAL_8250 != n && MCA + help + Say Y here if you have a MCA serial ports. + + To compile this driver as a module, choose M here: the module + will be called 8250_mca. + +config SERIAL_8250_ACORN + tristate "Acorn expansion card serial port support" + depends on ARCH_ACORN && SERIAL_8250 + help + If you have an Atomwide Serial card or Serial Port card for an Acorn + system, say Y to this option. The driver can handle 1, 2, or 3 port + cards. If unsure, say N. + +config SERIAL_8250_RM9K + bool "Support for MIPS RM9xxx integrated serial port" + depends on SERIAL_8250 != n && SERIAL_RM9000 + select SERIAL_8250_SHARE_IRQ + help + Selecting this option will add support for the integrated serial + port hardware found on MIPS RM9122 and similar processors. + If unsure, say N. + +config SERIAL_8250_FSL + bool + depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550 + default PPC + +config SERIAL_8250_DW + tristate "Support for Synopsys DesignWare 8250 quirks" + depends on SERIAL_8250 && OF + help + Selecting this option will enable handling of the extra features + present in the Synopsys DesignWare APB UART. diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile new file mode 100644 index 000000000000..867bba738908 --- /dev/null +++ b/drivers/tty/serial/8250/Makefile @@ -0,0 +1,20 @@ +# +# Makefile for the 8250 serial device drivers. +# + +obj-$(CONFIG_SERIAL_8250) += 8250.o +obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o +obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o +obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o +obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o +obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o +obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o +obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o +obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o +obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o +obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o +obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o +obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o +obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o +obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o +obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o diff --git a/drivers/tty/serial/m32r_sio.c b/drivers/tty/serial/8250/m32r_sio.c similarity index 100% rename from drivers/tty/serial/m32r_sio.c rename to drivers/tty/serial/8250/m32r_sio.c diff --git a/drivers/tty/serial/m32r_sio.h b/drivers/tty/serial/8250/m32r_sio.h similarity index 100% rename from drivers/tty/serial/m32r_sio.h rename to drivers/tty/serial/8250/m32r_sio.h diff --git a/drivers/tty/serial/m32r_sio_reg.h b/drivers/tty/serial/8250/m32r_sio_reg.h similarity index 100% rename from drivers/tty/serial/m32r_sio_reg.h rename to drivers/tty/serial/8250/m32r_sio_reg.h diff --git a/drivers/tty/serial/serial_cs.c b/drivers/tty/serial/8250/serial_cs.c similarity index 100% rename from drivers/tty/serial/serial_cs.c rename to drivers/tty/serial/8250/serial_cs.c diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index aca2386c5ef1..0bff23897509 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -5,279 +5,7 @@ menu "Serial drivers" depends on HAS_IOMEM -# -# The new 8250/16550 serial drivers -config SERIAL_8250 - tristate "8250/16550 and compatible serial support" - select SERIAL_CORE - ---help--- - This selects whether you want to include the driver for the standard - serial ports. The standard answer is Y. People who might say N - here are those that are setting up dedicated Ethernet WWW/FTP - servers, or users that have one of the various bus mice instead of a - serial mouse and don't intend to use their machine's standard serial - port for anything. (Note that the Cyclades and Stallion multi - serial port drivers do not need this driver built in for them to - work.) - - To compile this driver as a module, choose M here: the - module will be called 8250. - [WARNING: Do not compile this driver as a module if you are using - non-standard serial ports, since the configuration information will - be lost when the driver is unloaded. This limitation may be lifted - in the future.] - - BTW1: If you have a mouseman serial mouse which is not recognized by - the X window system, try running gpm first. - - BTW2: If you intend to use a software modem (also called Winmodem) - under Linux, forget it. These modems are crippled and require - proprietary drivers which are only available under Windows. - - Most people will say Y or M here, so that they can use serial mice, - modems and similar devices connecting to the standard serial ports. - -config SERIAL_8250_CONSOLE - bool "Console on 8250/16550 and compatible serial port" - depends on SERIAL_8250=y - select SERIAL_CORE_CONSOLE - ---help--- - If you say Y here, it will be possible to use a serial port as the - system console (the system console is the device which receives all - kernel messages and warnings and which allows logins in single user - mode). This could be useful if some terminal or printer is connected - to that serial port. - - Even if you say Y here, the currently visible virtual console - (/dev/tty0) will still be used as the system console by default, but - you can alter that using a kernel command line option such as - "console=ttyS1". (Try "man bootparam" or see the documentation of - your boot loader (grub or lilo or loadlin) about how to pass options - to the kernel at boot time.) - - If you don't have a VGA card installed and you say Y here, the - kernel will automatically use the first serial line, /dev/ttyS0, as - system console. - - You can set that using a kernel command line option such as - "console=uart8250,io,0x3f8,9600n8" - "console=uart8250,mmio,0xff5e0000,115200n8". - and it will switch to normal serial console when the corresponding - port is ready. - "earlycon=uart8250,io,0x3f8,9600n8" - "earlycon=uart8250,mmio,0xff5e0000,115200n8". - it will not only setup early console. - - If unsure, say N. - -config FIX_EARLYCON_MEM - bool - depends on X86 - default y - -config SERIAL_8250_GSC - tristate - depends on SERIAL_8250 && GSC - default SERIAL_8250 - -config SERIAL_8250_PCI - tristate "8250/16550 PCI device support" if EXPERT - depends on SERIAL_8250 && PCI - default SERIAL_8250 - help - This builds standard PCI serial support. You may be able to - disable this feature if you only need legacy serial support. - Saves about 9K. - -config SERIAL_8250_PNP - tristate "8250/16550 PNP device support" if EXPERT - depends on SERIAL_8250 && PNP - default SERIAL_8250 - help - This builds standard PNP serial support. You may be able to - disable this feature if you only need legacy serial support. - -config SERIAL_8250_FSL - bool - depends on SERIAL_8250_CONSOLE && PPC_UDBG_16550 - default PPC - -config SERIAL_8250_HP300 - tristate - depends on SERIAL_8250 && HP300 - default SERIAL_8250 - -config SERIAL_8250_CS - tristate "8250/16550 PCMCIA device support" - depends on PCMCIA && SERIAL_8250 - ---help--- - Say Y here to enable support for 16-bit PCMCIA serial devices, - including serial port cards, modems, and the modem functions of - multi-function Ethernet/modem cards. (PCMCIA- or PC-cards are - credit-card size devices often used with laptops.) - - To compile this driver as a module, choose M here: the - module will be called serial_cs. - - If unsure, say N. - -config SERIAL_8250_NR_UARTS - int "Maximum number of 8250/16550 serial ports" - depends on SERIAL_8250 - default "4" - help - Set this to the number of serial ports you want the driver - to support. This includes any ports discovered via ACPI or - PCI enumeration and any ports that may be added at run-time - via hot-plug, or any ISA multi-port serial cards. - -config SERIAL_8250_RUNTIME_UARTS - int "Number of 8250/16550 serial ports to register at runtime" - depends on SERIAL_8250 - range 0 SERIAL_8250_NR_UARTS - default "4" - help - Set this to the maximum number of serial ports you want - the kernel to register at boot time. This can be overridden - with the module parameter "nr_uarts", or boot-time parameter - 8250.nr_uarts - -config SERIAL_8250_EXTENDED - bool "Extended 8250/16550 serial driver options" - depends on SERIAL_8250 - help - If you wish to use any non-standard features of the standard "dumb" - driver, say Y here. This includes HUB6 support, shared serial - interrupts, special multiport support, support for more than the - four COM 1/2/3/4 boards, etc. - - Note that the answer to this question won't directly affect the - kernel: saying N will just cause the configurator to skip all - the questions about serial driver options. If unsure, say N. - -config SERIAL_8250_MANY_PORTS - bool "Support more than 4 legacy serial ports" - depends on SERIAL_8250_EXTENDED && !IA64 - help - Say Y here if you have dumb serial boards other than the four - standard COM 1/2/3/4 ports. This may happen if you have an AST - FourPort, Accent Async, Boca (read the Boca mini-HOWTO, available - from ), or other custom - serial port hardware which acts similar to standard serial port - hardware. If you only use the standard COM 1/2/3/4 ports, you can - say N here to save some memory. You can also say Y if you have an - "intelligent" multiport card such as Cyclades, Digiboards, etc. - -# -# Multi-port serial cards -# - -config SERIAL_8250_FOURPORT - tristate "Support Fourport cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have an AST FourPort serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_fourport. - -config SERIAL_8250_ACCENT - tristate "Support Accent cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have an Accent Async serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_accent. - -config SERIAL_8250_BOCA - tristate "Support Boca cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have a Boca serial board. Please read the Boca - mini-HOWTO, available from - - To compile this driver as a module, choose M here: the module - will be called 8250_boca. - -config SERIAL_8250_EXAR_ST16C554 - tristate "Support Exar ST16C554/554D Quad UART" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - The Uplogix Envoy TU301 uses this Exar Quad UART. If you are - tinkering with your Envoy TU301, or have a machine with this UART, - say Y here. - - To compile this driver as a module, choose M here: the module - will be called 8250_exar_st16c554. - -config SERIAL_8250_HUB6 - tristate "Support Hub6 cards" - depends on SERIAL_8250 != n && ISA && SERIAL_8250_MANY_PORTS - help - Say Y here if you have a HUB6 serial board. - - To compile this driver as a module, choose M here: the module - will be called 8250_hub6. - -config SERIAL_8250_SHARE_IRQ - bool "Support for sharing serial interrupts" - depends on SERIAL_8250_EXTENDED - help - Some serial boards have hardware support which allows multiple dumb - serial ports on the same board to share a single IRQ. To enable - support for this in the serial driver, say Y here. - -config SERIAL_8250_DETECT_IRQ - bool "Autodetect IRQ on standard ports (unsafe)" - depends on SERIAL_8250_EXTENDED - help - Say Y here if you want the kernel to try to guess which IRQ - to use for your serial port. - - This is considered unsafe; it is far better to configure the IRQ in - a boot script using the setserial command. - - If unsure, say N. - -config SERIAL_8250_RSA - bool "Support RSA serial ports" - depends on SERIAL_8250_EXTENDED - help - ::: To be written ::: - -config SERIAL_8250_MCA - tristate "Support 8250-type ports on MCA buses" - depends on SERIAL_8250 != n && MCA - help - Say Y here if you have a MCA serial ports. - - To compile this driver as a module, choose M here: the module - will be called 8250_mca. - -config SERIAL_8250_ACORN - tristate "Acorn expansion card serial port support" - depends on ARCH_ACORN && SERIAL_8250 - help - If you have an Atomwide Serial card or Serial Port card for an Acorn - system, say Y to this option. The driver can handle 1, 2, or 3 port - cards. If unsure, say N. - -config SERIAL_8250_RM9K - bool "Support for MIPS RM9xxx integrated serial port" - depends on SERIAL_8250 != n && SERIAL_RM9000 - select SERIAL_8250_SHARE_IRQ - help - Selecting this option will add support for the integrated serial - port hardware found on MIPS RM9122 and similar processors. - If unsure, say N. - -config SERIAL_8250_DW - tristate "Support for Synopsys DesignWare 8250 quirks" - depends on SERIAL_8250 && OF - help - Selecting this option will enable handling of the extra features - present in the Synopsys DesignWare APB UART. +source "drivers/tty/serial/8250/Kconfig" comment "Non-8250 serial port support" diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index f5b01f2ce525..a6d1ac049965 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -14,22 +14,9 @@ obj-$(CONFIG_SERIAL_SUNZILOG) += sunzilog.o obj-$(CONFIG_SERIAL_SUNSU) += sunsu.o obj-$(CONFIG_SERIAL_SUNSAB) += sunsab.o -obj-$(CONFIG_SERIAL_8250) += 8250.o -obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o -obj-$(CONFIG_SERIAL_8250_GSC) += 8250_gsc.o -obj-$(CONFIG_SERIAL_8250_PCI) += 8250_pci.o -obj-$(CONFIG_SERIAL_8250_HP300) += 8250_hp300.o -obj-$(CONFIG_SERIAL_8250_CS) += serial_cs.o -obj-$(CONFIG_SERIAL_8250_ACORN) += 8250_acorn.o -obj-$(CONFIG_SERIAL_8250_CONSOLE) += 8250_early.o -obj-$(CONFIG_SERIAL_8250_FOURPORT) += 8250_fourport.o -obj-$(CONFIG_SERIAL_8250_ACCENT) += 8250_accent.o -obj-$(CONFIG_SERIAL_8250_BOCA) += 8250_boca.o -obj-$(CONFIG_SERIAL_8250_EXAR_ST16C554) += 8250_exar_st16c554.o -obj-$(CONFIG_SERIAL_8250_HUB6) += 8250_hub6.o -obj-$(CONFIG_SERIAL_8250_MCA) += 8250_mca.o -obj-$(CONFIG_SERIAL_8250_FSL) += 8250_fsl.o -obj-$(CONFIG_SERIAL_8250_DW) += 8250_dw.o +# Now bring in any enabled 8250/16450/16550 type drivers. +obj-$(CONFIG_SERIAL_8250) += 8250/ + obj-$(CONFIG_SERIAL_AMBA_PL010) += amba-pl010.o obj-$(CONFIG_SERIAL_AMBA_PL011) += amba-pl011.o obj-$(CONFIG_SERIAL_CLPS711X) += clps711x.o -- GitLab From 791b7d7cf69de11275e4dccec2f538eec02cbff6 Mon Sep 17 00:00:00 2001 From: Renato Caldas Date: Fri, 6 Jan 2012 15:20:51 +0000 Subject: [PATCH 0169/1359] USB: serial: CP210x: Added USB-ID for the Link Instruments MSO-19 This device is a Oscilloscope/Logic Analizer/Pattern Generator/TDR, using a Silabs CP2103 USB to UART Bridge. Signed-off-by: Renato Caldas Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index fba1147ed916..c2b5d4a09b16 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -138,6 +138,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1843, 0x0200) }, /* Vaisala USB Instrument Cable */ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ { USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */ + { USB_DEVICE(0x3195, 0xF190) }, /* Link Instruments MSO-19 */ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */ { } /* Terminating Entry */ }; -- GitLab From 55b2afbb92ad92e9f6b0aa4354eb1c94589280c3 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 16 Jan 2012 00:36:48 +0100 Subject: [PATCH 0170/1359] USB: cp210x: call generic open last in open Make sure port is fully initialised before calling generic open. Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index c2b5d4a09b16..bb4290bfe59d 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -410,13 +410,10 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) return result; } - result = usb_serial_generic_open(tty, port); - if (result) - return result; - /* Configure the termios structure */ cp210x_get_termios(tty, port); - return 0; + + return usb_serial_generic_open(tty, port); } static void cp210x_close(struct usb_serial_port *port) -- GitLab From 7f482fc88ac47662228d6b1f05759797c8936a30 Mon Sep 17 00:00:00 2001 From: Preston Fick Date: Mon, 16 Jan 2012 18:14:09 -0600 Subject: [PATCH 0171/1359] USB: cp210x: fix CP2104 baudrate usage This fix changes the way baudrates are set on the CP210x devices from Silicon Labs. The CP2101/2/3 will respond to both a GET/SET_BAUDDIV command, and GET/SET_BAUDRATE command, while CP2104 and higher devices only respond to GET/SET_BAUDRATE. The current cp210x.ko driver in kernel version 3.2.0 only implements the GET/SET_BAUDDIV command. This patch implements the two new codes for the GET/SET_BAUDRATE commands. Then there is a change in the way that the baudrate is assigned or retrieved. This is done according to the CP210x USB specification in AN571. This document can be found here: http://www.silabs.com/pages/DownloadDoc.aspx?FILEURL=Support%20Documents/TechnicalDocs/AN571.pdf&src=DocumentationWebPart Sections 5.3/5.4 describe the USB packets for the old baudrate method. Sections 5.5/5.6 describe the USB packets for the new method. This patch also implements the new request scheme, and eliminates the unnecessary baudrate calculations since it uses the "actual baudrate" method. This patch solves the problem reported for the CP2104 in bug 42586, and also keeps support for all other devices (CP2101/2/3). This patchfile is also attached to the bug report on bugzilla.kernel.org. This patch has been developed and test on the 3.2.0 mainline kernel version under Ubuntu 10.11. Signed-off-by: Preston Fick [duplicate patch also sent by Johan - gregkh] Signed-off-by: Johan Hovold Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index bb4290bfe59d..f4267886e255 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -202,6 +202,8 @@ static struct usb_serial_driver cp210x_device = { #define CP210X_EMBED_EVENTS 0x15 #define CP210X_GET_EVENTSTATE 0x16 #define CP210X_SET_CHARS 0x19 +#define CP210X_GET_BAUDRATE 0x1D +#define CP210X_SET_BAUDRATE 0x1E /* CP210X_IFC_ENABLE */ #define UART_ENABLE 0x0001 @@ -465,10 +467,7 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, dbg("%s - port %d", __func__, port->number); - cp210x_get_config(port, CP210X_GET_BAUDDIV, &baud, 2); - /* Convert to baudrate */ - if (baud) - baud = cp210x_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); + cp210x_get_config(port, CP210X_GET_BAUDRATE, &baud, 4); dbg("%s - baud rate = %d", __func__, baud); *baudp = baud; @@ -597,8 +596,7 @@ static void cp210x_set_termios(struct tty_struct *tty, if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { dbg("%s - Setting baud rate to %d baud", __func__, baud); - if (cp210x_set_config_single(port, CP210X_SET_BAUDDIV, - ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { + if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud, 4)) { dbg("Baud rate requested not supported by device"); baud = tty_termios_baud_rate(old_termios); } -- GitLab From ba1960257c5980f9b58057995ce3394bd8e48ca3 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 10 Jan 2012 15:19:54 +0200 Subject: [PATCH 0172/1359] mac80211: update oper_channel on ibss join Commit 13c40c5 ("mac80211: Add HT operation modes for IBSS") broke ibss operation by mistakenly removing the local->oper_channel update (causing ibss to start on the wrong channel). fix it. Signed-off-by: Eliad Peller Acked-by: Simon Wunderlich Signed-off-by: John W. Linville --- net/mac80211/ibss.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index b3d76b756cd5..a4643969a13b 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -106,6 +106,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, sdata->drop_unencrypted = capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0; + local->oper_channel = chan; channel_type = ifibss->channel_type; if (channel_type > NL80211_CHAN_HT20 && !cfg80211_can_beacon_sec_chan(local->hw.wiphy, chan, channel_type)) -- GitLab From 405385f8ce7a2ed8f82e216d88b5282142e1288b Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Wed, 11 Jan 2012 13:11:50 +0200 Subject: [PATCH 0173/1359] mac80211: set bss_conf.idle when vif is connected __ieee80211_recalc_idle() iterates through the vifs, sets bss_conf.idle = true if they are disconnected, and increases "count" if they are not (which later gets evaluated in order to determine whether the device is idle). However, the loop doesn't set bss_conf.idle = false (along with increasing "count"), causing the device idle state and the vif idle state to get out of sync in some cases. Signed-off-by: Eliad Peller Signed-off-by: John W. Linville --- net/mac80211/iface.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index e47768cb8cb3..01a21c2f6ab3 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1314,6 +1314,7 @@ u32 __ieee80211_recalc_idle(struct ieee80211_local *local) continue; } /* count everything else */ + sdata->vif.bss_conf.idle = false; count++; } -- GitLab From b49ba04a3a0382e7314d990707c21094c410425a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 19 Jan 2012 08:20:57 -0800 Subject: [PATCH 0174/1359] iwlwifi: fix PCI-E transport "inta" race When an interrupt comes in, we read the reason bits and collect them into "trans_pcie->inta". This happens with the spinlock held. However, there's a bug resetting this variable -- that happens after the spinlock has been released. This means that it is possible for interrupts to be missed if the reset happens after some other interrupt reasons were already added to the variable. I found this by code inspection, looking for a reason that we sometimes see random commands time out. It seems possible that this causes such behaviour, but I can't say for sure right now since it happens extremely infrequently on my test systems. Cc: stable@vger.kernel.org [3.2] Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c index 752493f00406..65d1f05007be 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c +++ b/drivers/net/wireless/iwlwifi/iwl-trans-pcie-rx.c @@ -972,11 +972,11 @@ void iwl_irq_tasklet(struct iwl_trans *trans) } #endif - spin_unlock_irqrestore(&trans->shrd->lock, flags); - /* saved interrupt in inta variable now we can reset trans_pcie->inta */ trans_pcie->inta = 0; + spin_unlock_irqrestore(&trans->shrd->lock, flags); + /* Now service all interrupt bits discovered above. */ if (inta & CSR_INT_BIT_HW_ERR) { IWL_ERR(trans, "Hardware error detected. Restarting.\n"); -- GitLab From 34b76fcaee574017862ea3fa0efdcd77a9d0e57d Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 16 Jan 2012 00:36:49 +0100 Subject: [PATCH 0175/1359] USB: cp210x: fix up set_termios variables [Based on a patch from Johan, mangled by gregkh to keep things in line] Fix up the variable usage in the set_termios call. Signed-off-by: Johan Hovold Cc: Preston Fick Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index f4267886e255..1270e024bb3e 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -580,7 +580,8 @@ static void cp210x_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { unsigned int cflag, old_cflag; - unsigned int baud = 0, bits; + u32 baud; + unsigned int bits; unsigned int modem_ctl[4]; dbg("%s - port %d", __func__, port->number); @@ -596,7 +597,7 @@ static void cp210x_set_termios(struct tty_struct *tty, if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { dbg("%s - Setting baud rate to %d baud", __func__, baud); - if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud, 4)) { + if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud, sizeof(baud))) { dbg("Baud rate requested not supported by device"); baud = tty_termios_baud_rate(old_termios); } -- GitLab From be125d9c8d59560e7cc2d6e2b65c8fd233498ab7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 16 Jan 2012 00:36:50 +0100 Subject: [PATCH 0176/1359] USB: cp210x: do not map baud rates to B0 We do not implement B0 hangup yet so map low baudrates to 300bps. Signed-off-by: Johan Hovold Cc: Preston Fick Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 1270e024bb3e..ad7599ed5df9 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -363,8 +363,8 @@ static inline int cp210x_set_config_single(struct usb_serial_port *port, * Quantises the baud rate as per AN205 Table 1 */ static unsigned int cp210x_quantise_baudrate(unsigned int baud) { - if (baud <= 56) baud = 0; - else if (baud <= 300) baud = 300; + if (baud <= 300) + baud = 300; else if (baud <= 600) baud = 600; else if (baud <= 1200) baud = 1200; else if (baud <= 1800) baud = 1800; -- GitLab From e5990874e511d5bbca23b3396419480cb2ca0ee7 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 16 Jan 2012 00:36:51 +0100 Subject: [PATCH 0177/1359] USB: cp210x: clean up, refactor and document speed handling Clean up and refactor speed handling. Document baud rate handling for CP210{1,2,4,5,10}. Signed-off-by: Johan Hovold Cc: Preston Fick Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 71 +++++++++++++++++++++++++++++-------- 1 file changed, 57 insertions(+), 14 deletions(-) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index ad7599ed5df9..2d2d23933ba6 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -39,6 +39,8 @@ static void cp210x_get_termios(struct tty_struct *, struct usb_serial_port *port); static void cp210x_get_termios_port(struct usb_serial_port *port, unsigned int *cflagp, unsigned int *baudp); +static void cp210x_change_speed(struct tty_struct *, struct usb_serial_port *, + struct ktermios *); static void cp210x_set_termios(struct tty_struct *, struct usb_serial_port *, struct ktermios*); static int cp210x_tiocmget(struct tty_struct *); @@ -576,11 +578,62 @@ static void cp210x_get_termios_port(struct usb_serial_port *port, *cflagp = cflag; } +/* + * CP2101 supports the following baud rates: + * + * 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 14400, 19200, 28800, + * 38400, 56000, 57600, 115200, 128000, 230400, 460800, 921600 + * + * CP2102 and CP2103 support the following additional rates: + * + * 4000, 16000, 51200, 64000, 76800, 153600, 250000, 256000, 500000, + * 576000 + * + * The device will map a requested rate to a supported one, but the result + * of requests for rates greater than 1053257 is undefined (see AN205). + * + * CP2104, CP2105 and CP2110 support most rates up to 2M, 921k and 1M baud, + * respectively, with an error less than 1%. The actual rates are determined + * by + * + * div = round(freq / (2 x prescale x request)) + * actual = freq / (2 x prescale x div) + * + * For CP2104 and CP2105 freq is 48Mhz and prescale is 4 for request <= 365bps + * or 1 otherwise. + * For CP2110 freq is 24Mhz and prescale is 4 for request <= 300bps or 1 + * otherwise. + */ +static void cp210x_change_speed(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + u32 baud; + + baud = tty->termios->c_ospeed; + + /* This maps the requested rate to a rate valid on cp2102 or cp2103. + * + * NOTE: B0 is not implemented. + */ + baud = cp210x_quantise_baudrate(baud); + + dbg("%s - setting baud rate to %u", __func__, baud); + if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud, + sizeof(baud))) { + dev_warn(&port->dev, "failed to set baud rate to %u\n", baud); + if (old_termios) + baud = old_termios->c_ospeed; + else + baud = 9600; + } + + tty_encode_baud_rate(tty, baud, baud); +} + static void cp210x_set_termios(struct tty_struct *tty, struct usb_serial_port *port, struct ktermios *old_termios) { unsigned int cflag, old_cflag; - u32 baud; unsigned int bits; unsigned int modem_ctl[4]; @@ -591,19 +644,9 @@ static void cp210x_set_termios(struct tty_struct *tty, cflag = tty->termios->c_cflag; old_cflag = old_termios->c_cflag; - baud = cp210x_quantise_baudrate(tty_get_baud_rate(tty)); - - /* If the baud rate is to be updated*/ - if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { - dbg("%s - Setting baud rate to %d baud", __func__, - baud); - if (cp210x_set_config(port, CP210X_SET_BAUDRATE, &baud, sizeof(baud))) { - dbg("Baud rate requested not supported by device"); - baud = tty_termios_baud_rate(old_termios); - } - } - /* Report back the resulting baud rate */ - tty_encode_baud_rate(tty, baud, baud); + + if (tty->termios->c_ospeed != old_termios->c_ospeed) + cp210x_change_speed(tty, port, old_termios); /* If the number of data bits is to be updated */ if ((cflag & CSIZE) != (old_cflag & CSIZE)) { -- GitLab From cdc32fd6f7b2b2580d7f1b74563f888e4dd9eb8a Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 16 Jan 2012 00:36:52 +0100 Subject: [PATCH 0178/1359] USB: cp210x: initialise baud rate at open The newer cp2104 devices require the baud rate to be initialised after power on. Make sure it is set when port is opened. Signed-off-by: Johan Hovold Cc: Preston Fick Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 2d2d23933ba6..5c3e8592fd22 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -417,6 +417,10 @@ static int cp210x_open(struct tty_struct *tty, struct usb_serial_port *port) /* Configure the termios structure */ cp210x_get_termios(tty, port); + /* The baud rate must be initialised on cp2104 */ + if (tty) + cp210x_change_speed(tty, port, NULL); + return usb_serial_generic_open(tty, port); } -- GitLab From d1620ca9e7bb0030068c3b45b653defde8839dac Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Mon, 16 Jan 2012 00:36:53 +0100 Subject: [PATCH 0179/1359] USB: cp210x: allow more baud rates above 1Mbaud Allow more baud rates to be set in [1M,2M] baud. Signed-off-by: Johan Hovold Cc: Preston Fick Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 5c3e8592fd22..8dbf51a43c45 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -394,10 +394,10 @@ static unsigned int cp210x_quantise_baudrate(unsigned int baud) { else if (baud <= 491520) baud = 460800; else if (baud <= 567138) baud = 500000; else if (baud <= 670254) baud = 576000; - else if (baud <= 1053257) baud = 921600; - else if (baud <= 1474560) baud = 1228800; - else if (baud <= 2457600) baud = 1843200; - else baud = 3686400; + else if (baud < 1000000) + baud = 921600; + else if (baud > 2000000) + baud = 2000000; return baud; } @@ -615,7 +615,8 @@ static void cp210x_change_speed(struct tty_struct *tty, baud = tty->termios->c_ospeed; - /* This maps the requested rate to a rate valid on cp2102 or cp2103. + /* This maps the requested rate to a rate valid on cp2102 or cp2103, + * or to an arbitrary rate in [1M,2M]. * * NOTE: B0 is not implemented. */ -- GitLab From 52a749992ca6a0fd304609af40ed3bfd6cef4660 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 24 Jan 2012 12:02:38 -0800 Subject: [PATCH 0180/1359] Revert "USB: usb-skeleton.c: fix open/disconnect race" This reverts commit 26c71a79cade5ccad80e0752cd82f3518df48fb3. It's not needed, to quote Ming Lei: Looks you have queued the patch into your tree, but just now I find the patch is not needed at all, since we have had minor_rwsem(drivers/usb/core/file.c) for this purpose, please drop the patch, sorry for it. Cc: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usb-skeleton.c | 18 +----------------- 1 file changed, 1 insertion(+), 17 deletions(-) diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index 8efeae24764f..b4a71679c933 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -27,8 +27,6 @@ #define USB_SKEL_VENDOR_ID 0xfff0 #define USB_SKEL_PRODUCT_ID 0xfff0 -static DEFINE_MUTEX(skel_mutex); - /* table of devices that work with this driver */ static const struct usb_device_id skel_table[] = { { USB_DEVICE(USB_SKEL_VENDOR_ID, USB_SKEL_PRODUCT_ID) }, @@ -101,25 +99,18 @@ static int skel_open(struct inode *inode, struct file *file) goto exit; } - mutex_lock(&skel_mutex); dev = usb_get_intfdata(interface); if (!dev) { - mutex_unlock(&skel_mutex); retval = -ENODEV; goto exit; } /* increment our usage count for the device */ kref_get(&dev->kref); - mutex_unlock(&skel_mutex); /* lock the device to allow correctly handling errors * in resumption */ mutex_lock(&dev->io_mutex); - if (!dev->interface) { - retval = -ENODEV; - goto out_err; - } retval = usb_autopm_get_interface(interface); if (retval) @@ -127,11 +118,7 @@ static int skel_open(struct inode *inode, struct file *file) /* save our object in the file's private structure */ file->private_data = dev; - -out_err: mutex_unlock(&dev->io_mutex); - if (retval) - kref_put(&dev->kref, skel_delete); exit: return retval; @@ -611,6 +598,7 @@ static void skel_disconnect(struct usb_interface *interface) int minor = interface->minor; dev = usb_get_intfdata(interface); + usb_set_intfdata(interface, NULL); /* give back our minor */ usb_deregister_dev(interface, &skel_class); @@ -622,12 +610,8 @@ static void skel_disconnect(struct usb_interface *interface) usb_kill_anchored_urbs(&dev->submitted); - mutex_lock(&skel_mutex); - usb_set_intfdata(interface, NULL); - /* decrement our usage count */ kref_put(&dev->kref, skel_delete); - mutex_unlock(&skel_mutex); dev_info(&interface->dev, "USB Skeleton #%d now disconnected", minor); } -- GitLab From 6d443d8499e4e59ffb949759cdded32730f8d2f6 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 13 Jan 2012 21:32:06 -0800 Subject: [PATCH 0181/1359] usb: io_ti: Make edge_remove_sysfs_attrs the port_remove method. Calling edge_remove_sysfs_attrs from edge_disconnect is too late as the device has already been removed from sysfs. Do the simple and obvious thing and make edge_remove_sysfs_attrs the port_remove method. Signed-off-by: Eric W. Biederman Reported-by: Wolfgang Frisch Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/io_ti.c | 10 ++-------- 1 file changed, 2 insertions(+), 8 deletions(-) diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 65bf06aa591a..5818bfc3261e 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -2657,15 +2657,7 @@ cleanup: static void edge_disconnect(struct usb_serial *serial) { - int i; - struct edgeport_port *edge_port; - dbg("%s", __func__); - - for (i = 0; i < serial->num_ports; ++i) { - edge_port = usb_get_serial_port_data(serial->port[i]); - edge_remove_sysfs_attrs(edge_port->port); - } } static void edge_release(struct usb_serial *serial) @@ -2744,6 +2736,7 @@ static struct usb_serial_driver edgeport_1port_device = { .disconnect = edge_disconnect, .release = edge_release, .port_probe = edge_create_sysfs_attrs, + .port_remove = edge_remove_sysfs_attrs, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, @@ -2775,6 +2768,7 @@ static struct usb_serial_driver edgeport_2port_device = { .disconnect = edge_disconnect, .release = edge_release, .port_probe = edge_create_sysfs_attrs, + .port_remove = edge_remove_sysfs_attrs, .ioctl = edge_ioctl, .set_termios = edge_set_termios, .tiocmget = edge_tiocmget, -- GitLab From e423d7401fd0717cb56a6cf51dd8341cc3e800d2 Mon Sep 17 00:00:00 2001 From: Kentaro Matsuyama Date: Thu, 12 Jan 2012 23:07:51 +0900 Subject: [PATCH 0182/1359] USB: option: Add LG docomo L-02C Add vendor and product ID for USB 3G/LTE modem of docomo L-02C Signed-off-by: Kentaro Matsuyama Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 420d9857394a..ea126a4490cd 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -480,6 +480,10 @@ static void option_instat_callback(struct urb *urb); #define ZD_VENDOR_ID 0x0685 #define ZD_PRODUCT_7000 0x7000 +/* LG products */ +#define LG_VENDOR_ID 0x1004 +#define LG_PRODUCT_L02C 0x618f + /* some devices interfaces need special handling due to a number of reasons */ enum option_blacklist_reason { OPTION_BLACKLIST_NONE = 0, @@ -1183,6 +1187,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(YUGA_VENDOR_ID, YUGA_PRODUCT_CLU526) }, { USB_DEVICE_AND_INTERFACE_INFO(VIETTEL_VENDOR_ID, VIETTEL_PRODUCT_VT1000, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZD_VENDOR_ID, ZD_PRODUCT_7000, 0xff, 0xff, 0xff) }, + { USB_DEVICE(LG_VENDOR_ID, LG_PRODUCT_L02C) }, /* docomo L-02C modem */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- GitLab From 1097ccebe630170080c41df0edcf88e0626e9c75 Mon Sep 17 00:00:00 2001 From: Harrison Metzger Date: Sun, 15 Jan 2012 08:43:24 -0600 Subject: [PATCH 0183/1359] USB: usbsevseg: fix max length This changes the max length for the usb seven segment delcom device to 8 from 6. Delcom has both 6 and 8 variants and having 8 works fine with devices which are only 6. Signed-off-by: Harrison Metzger Signed-off-by: Stuart Pook Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/usbsevseg.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/misc/usbsevseg.c b/drivers/usb/misc/usbsevseg.c index 107bf13b1cf1..b2d82b937392 100644 --- a/drivers/usb/misc/usbsevseg.c +++ b/drivers/usb/misc/usbsevseg.c @@ -24,7 +24,7 @@ #define VENDOR_ID 0x0fc5 #define PRODUCT_ID 0x1227 -#define MAXLEN 6 +#define MAXLEN 8 /* table of devices that work with this driver */ static const struct usb_device_id id_table[] = { -- GitLab From ce597919361dcec97341151690e780eade2a9cf4 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 13 Jan 2012 21:32:59 -0800 Subject: [PATCH 0184/1359] sysfs: Complain bitterly about attempts to remove files from nonexistent directories. Recently an OOPS was observed from the usb serial io_ti driver when it tried to remove sysfs directories. Upon investigation it turns out this driver was always buggy and that a recent sysfs change had stopped guarding itself against removing attributes from sysfs directories that had already been removed. :( Historically we have been silent about attempting to files from nonexistent sysfs directories and have politely returned error codes. That has resulted in people writing broken code that ignores the error codes. Issue a kernel WARNING and a stack backtrace to make it clear in no uncertain terms that abusing sysfs is not ok, and the callers need to fix their code. This change transforms the io_ti OOPS into a more comprehensible error message and stack backtrace. Signed-off-by: Eric W. Biederman Reported-by: Wolfgang Frisch Cc: stable Signed-off-by: Greg Kroah-Hartman --- fs/sysfs/file.c | 6 ++++++ fs/sysfs/inode.c | 5 ++++- 2 files changed, 10 insertions(+), 1 deletion(-) diff --git a/fs/sysfs/file.c b/fs/sysfs/file.c index 62f4fb37789e..00012e31829d 100644 --- a/fs/sysfs/file.c +++ b/fs/sysfs/file.c @@ -493,6 +493,12 @@ int sysfs_attr_ns(struct kobject *kobj, const struct attribute *attr, const void *ns = NULL; int err; + if (!dir_sd) { + WARN(1, KERN_ERR "sysfs: kobject %s without dirent\n", + kobject_name(kobj)); + return -ENOENT; + } + err = 0; if (!sysfs_ns_type(dir_sd)) goto out; diff --git a/fs/sysfs/inode.c b/fs/sysfs/inode.c index 4a802b4a9056..85eb81683a29 100644 --- a/fs/sysfs/inode.c +++ b/fs/sysfs/inode.c @@ -318,8 +318,11 @@ int sysfs_hash_and_remove(struct sysfs_dirent *dir_sd, const void *ns, const cha struct sysfs_addrm_cxt acxt; struct sysfs_dirent *sd; - if (!dir_sd) + if (!dir_sd) { + WARN(1, KERN_WARNING "sysfs: can not remove '%s', no directory\n", + name); return -ENOENT; + } sysfs_addrm_start(&acxt, dir_sd); -- GitLab From c428b70c1e115c5649707a602742e34130d19428 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Mon, 16 Jan 2012 12:41:47 +0100 Subject: [PATCH 0185/1359] USB: cdc-wdm: updating desc->length must be protected by spin_lock MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit wdm_in_callback() will also touch this field, so we cannot change it without locking Cc: stable@vger.kernel.org Signed-off-by: Bjørn Mork Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 1c50baff7725..1f6b5c8394b4 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -467,7 +467,9 @@ retry: for (i = 0; i < desc->length - cntr; i++) desc->ubuf[i] = desc->ubuf[i + cntr]; + spin_lock_irq(&desc->iuspin); desc->length -= cntr; + spin_unlock_irq(&desc->iuspin); /* in case we had outstanding data */ if (!desc->length) clear_bit(WDM_READ, &desc->flags); -- GitLab From e8537bd2c4f325a4796da33564ddcef9489b7feb Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Mon, 16 Jan 2012 12:41:48 +0100 Subject: [PATCH 0186/1359] USB: cdc-wdm: use two mutexes to allow simultaneous read and write MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit using a separate read and write mutex for locking is sufficient to make the driver accept simultaneous read and write. This improves useability a lot. Signed-off-by: Bjørn Mork Cc: stable Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 49 +++++++++++++++++++++++-------------- 1 file changed, 31 insertions(+), 18 deletions(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 1f6b5c8394b4..023d271c2614 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -88,7 +88,8 @@ struct wdm_device { int count; dma_addr_t shandle; dma_addr_t ihandle; - struct mutex lock; + struct mutex wlock; + struct mutex rlock; wait_queue_head_t wait; struct work_struct rxwork; int werr; @@ -323,7 +324,7 @@ static ssize_t wdm_write } /* concurrent writes and disconnect */ - r = mutex_lock_interruptible(&desc->lock); + r = mutex_lock_interruptible(&desc->wlock); rv = -ERESTARTSYS; if (r) { kfree(buf); @@ -386,7 +387,7 @@ static ssize_t wdm_write out: usb_autopm_put_interface(desc->intf); outnp: - mutex_unlock(&desc->lock); + mutex_unlock(&desc->wlock); outnl: return rv < 0 ? rv : count; } @@ -399,7 +400,7 @@ static ssize_t wdm_read struct wdm_device *desc = file->private_data; - rv = mutex_lock_interruptible(&desc->lock); /*concurrent reads */ + rv = mutex_lock_interruptible(&desc->rlock); /*concurrent reads */ if (rv < 0) return -ERESTARTSYS; @@ -476,7 +477,7 @@ retry: rv = cntr; err: - mutex_unlock(&desc->lock); + mutex_unlock(&desc->rlock); return rv; } @@ -542,7 +543,8 @@ static int wdm_open(struct inode *inode, struct file *file) } intf->needs_remote_wakeup = 1; - mutex_lock(&desc->lock); + /* using write lock to protect desc->count */ + mutex_lock(&desc->wlock); if (!desc->count++) { desc->werr = 0; desc->rerr = 0; @@ -555,7 +557,7 @@ static int wdm_open(struct inode *inode, struct file *file) } else { rv = 0; } - mutex_unlock(&desc->lock); + mutex_unlock(&desc->wlock); usb_autopm_put_interface(desc->intf); out: mutex_unlock(&wdm_mutex); @@ -567,9 +569,11 @@ static int wdm_release(struct inode *inode, struct file *file) struct wdm_device *desc = file->private_data; mutex_lock(&wdm_mutex); - mutex_lock(&desc->lock); + + /* using write lock to protect desc->count */ + mutex_lock(&desc->wlock); desc->count--; - mutex_unlock(&desc->lock); + mutex_unlock(&desc->wlock); if (!desc->count) { dev_dbg(&desc->intf->dev, "wdm_release: cleanup"); @@ -667,7 +671,8 @@ next_desc: desc = kzalloc(sizeof(struct wdm_device), GFP_KERNEL); if (!desc) goto out; - mutex_init(&desc->lock); + mutex_init(&desc->rlock); + mutex_init(&desc->wlock); spin_lock_init(&desc->iuspin); init_waitqueue_head(&desc->wait); desc->wMaxCommand = maxcom; @@ -781,10 +786,12 @@ static void wdm_disconnect(struct usb_interface *intf) /* to terminate pending flushes */ clear_bit(WDM_IN_USE, &desc->flags); spin_unlock_irqrestore(&desc->iuspin, flags); - mutex_lock(&desc->lock); + mutex_lock(&desc->rlock); + mutex_lock(&desc->wlock); kill_urbs(desc); cancel_work_sync(&desc->rxwork); - mutex_unlock(&desc->lock); + mutex_unlock(&desc->wlock); + mutex_unlock(&desc->rlock); wake_up_all(&desc->wait); if (!desc->count) cleanup(desc); @@ -800,8 +807,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message) dev_dbg(&desc->intf->dev, "wdm%d_suspend\n", intf->minor); /* if this is an autosuspend the caller does the locking */ - if (!PMSG_IS_AUTO(message)) - mutex_lock(&desc->lock); + if (!PMSG_IS_AUTO(message)) { + mutex_lock(&desc->rlock); + mutex_lock(&desc->wlock); + } spin_lock_irq(&desc->iuspin); if (PMSG_IS_AUTO(message) && @@ -817,8 +826,10 @@ static int wdm_suspend(struct usb_interface *intf, pm_message_t message) kill_urbs(desc); cancel_work_sync(&desc->rxwork); } - if (!PMSG_IS_AUTO(message)) - mutex_unlock(&desc->lock); + if (!PMSG_IS_AUTO(message)) { + mutex_unlock(&desc->wlock); + mutex_unlock(&desc->rlock); + } return rv; } @@ -856,7 +867,8 @@ static int wdm_pre_reset(struct usb_interface *intf) { struct wdm_device *desc = usb_get_intfdata(intf); - mutex_lock(&desc->lock); + mutex_lock(&desc->rlock); + mutex_lock(&desc->wlock); kill_urbs(desc); /* @@ -878,7 +890,8 @@ static int wdm_post_reset(struct usb_interface *intf) int rv; rv = recover_from_urb_loss(desc); - mutex_unlock(&desc->lock); + mutex_unlock(&desc->wlock); + mutex_unlock(&desc->rlock); return 0; } -- GitLab From 62aaf24dc125d7c55c93e313d15611f152b030c7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Mon, 16 Jan 2012 15:11:57 +0100 Subject: [PATCH 0187/1359] USB: cdc-wdm: call wake_up_all to allow driver to shutdown on device removal MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit wdm_disconnect() waits for the mutex held by wdm_read() before calling wake_up_all(). This causes a deadlock, preventing device removal to complete. Do the wake_up_all() before we start waiting for the locks. Signed-off-by: Bjørn Mork Cc: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 023d271c2614..07aa67611b65 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -786,13 +786,13 @@ static void wdm_disconnect(struct usb_interface *intf) /* to terminate pending flushes */ clear_bit(WDM_IN_USE, &desc->flags); spin_unlock_irqrestore(&desc->iuspin, flags); + wake_up_all(&desc->wait); mutex_lock(&desc->rlock); mutex_lock(&desc->wlock); kill_urbs(desc); cancel_work_sync(&desc->rxwork); mutex_unlock(&desc->wlock); mutex_unlock(&desc->rlock); - wake_up_all(&desc->wait); if (!desc->count) cleanup(desc); mutex_unlock(&wdm_mutex); -- GitLab From 655e247daf52b202a6c2d0f8a06dd2051e756ce4 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Mon, 16 Jan 2012 15:11:59 +0100 Subject: [PATCH 0188/1359] USB: cdc-wdm: better allocate a buffer that is at least as big as we tell the USB core MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit As it turns out, there was a mismatch between the allocated inbuf size (desc->bMaxPacketSize0, typically something like 64) and the length we specified in the URB (desc->wMaxCommand, typically something like 2048) Signed-off-by: Bjørn Mork Cc: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 07aa67611b65..a940ad9d0d8f 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -723,7 +723,7 @@ next_desc: goto err; desc->inbuf = usb_alloc_coherent(interface_to_usbdev(intf), - desc->bMaxPacketSize0, + desc->wMaxCommand, GFP_KERNEL, &desc->response->transfer_dma); if (!desc->inbuf) -- GitLab From 2492c6e6454ff3edb11e273b071a6ea80a199c71 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 12 Jan 2012 10:55:13 +0100 Subject: [PATCH 0189/1359] drivers/usb/host/ehci-fsl.c: add missing iounmap Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // Signed-off-by: Julia Lawall Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-fsl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index e90344a17631..b556a72264d1 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -125,7 +125,7 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, */ if (pdata->init && pdata->init(pdev)) { retval = -ENODEV; - goto err3; + goto err4; } /* Enable USB controller, 83xx or 8536 */ -- GitLab From 3297f86a3d4158e052538c7b9a3dea9c855a1b42 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 24 Jan 2012 10:18:10 +0200 Subject: [PATCH 0190/1359] usb: serial: kobil_sct: fix compile warning: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the following compile warning: drivers/usb/serial/kobil_sct.c: In function ‘__check_debug’: drivers/usb/serial/kobil_sct.c:719:1: warning: return from incompatible pointer type [enabled by default] Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/kobil_sct.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 5d3beeeb5fd9..a92a3efb507b 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -38,7 +38,7 @@ #include #include "kobil_sct.h" -static int debug; +static bool debug; /* Version Information */ #define DRIVER_VERSION "21/05/2004" -- GitLab From 194b3af4eb4b7ba84e2e4274daf9f58aa958bd04 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Jan 2012 11:58:15 -0500 Subject: [PATCH 0191/1359] USB: OHCI: fix new compiler warnings MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch (as1515) fixes some unavoidably dumb compiler warnings: CC [M] drivers/usb/renesas_usbhs/mod.o In file included from drivers/usb/host/ohci-hcd.c:101:0: drivers/usb/host/ohci-dbg.c: In function ‘fill_registers_buffer’: drivers/usb/host/ohci-dbg.c:656:2: warning: the comparison will always evaluate as ‘true’ for the address of ‘next’ will never be NULL [-Waddress] drivers/usb/host/ohci-dbg.c:675:3: warning: the comparison will always evaluate as ‘true’ for the address of ‘next’ will never be NULL [-Waddress] Instead of trying to fix the macro to work under all cirumstances, just add a second macro for use in cases where the "next" argument is the address of a local variable. Unfortunately the macro cannot be replaced by a real subroutine, because there's no va_list version of ohci_dbg() or dev_dbg(). Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-dbg.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) diff --git a/drivers/usb/host/ohci-dbg.c b/drivers/usb/host/ohci-dbg.c index 5179fcd73d8a..e4bcb62b930a 100644 --- a/drivers/usb/host/ohci-dbg.c +++ b/drivers/usb/host/ohci-dbg.c @@ -82,6 +82,14 @@ urb_print(struct urb * urb, char * str, int small, int status) ohci_dbg(ohci,format, ## arg ); \ } while (0); +/* Version for use where "next" is the address of a local variable */ +#define ohci_dbg_nosw(ohci, next, size, format, arg...) \ + do { \ + unsigned s_len; \ + s_len = scnprintf(*next, *size, format, ## arg); \ + *size -= s_len; *next += s_len; \ + } while (0); + static void ohci_dump_intr_mask ( struct ohci_hcd *ohci, @@ -653,7 +661,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) /* dump driver info, then registers in spec order */ - ohci_dbg_sw (ohci, &next, &size, + ohci_dbg_nosw(ohci, &next, &size, "bus %s, device %s\n" "%s\n" "%s\n", @@ -672,7 +680,7 @@ static ssize_t fill_registers_buffer(struct debug_buffer *buf) /* hcca */ if (ohci->hcca) - ohci_dbg_sw (ohci, &next, &size, + ohci_dbg_nosw(ohci, &next, &size, "hcca frame 0x%04x\n", ohci_frame_no(ohci)); /* other registers mostly affect frame timings */ -- GitLab From 0fcd97789028e8ec286a4248c20a71eae239ba61 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 21 Jan 2012 11:02:56 -0800 Subject: [PATCH 0192/1359] kernel-doc: fix new warning in usb.h Fix new kernel-doc warning: Warning(include/linux/usb.h:1251): No description found for parameter 'num_mapped_sgs' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/linux/usb.h b/include/linux/usb.h index 27a4e16d2bf1..69d845739bc2 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1073,6 +1073,7 @@ typedef void (*usb_complete_t)(struct urb *); * which the host controller driver should use in preference to the * transfer_buffer. * @sg: scatter gather buffer list + * @num_mapped_sgs: (internal) number of mapped sg entries * @num_sgs: number of entries in the sg list * @transfer_buffer_length: How big is transfer_buffer. The transfer may * be broken up into chunks according to the current maximum packet -- GitLab From 8dd5d2f15134c17302e67d9aedb0c51e00c354b0 Mon Sep 17 00:00:00 2001 From: Lucas Kannebley Tavares Date: Mon, 9 Jan 2012 17:39:24 -0200 Subject: [PATCH 0193/1359] Updated TTY MAINTAINERS info Greg Kroah-Hartman is the current TTY maintainer, however he wouldn't appear listed as such upon running get_maintainers.pl for drivers under drivers/tty/serial. Signed-off-by: Lucas Kannebley Tavares Signed-off-by: Greg Kroah-Hartman --- MAINTAINERS | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/MAINTAINERS b/MAINTAINERS index 89b70df91f4f..a723385f9140 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -6664,7 +6664,7 @@ TTY LAYER M: Greg Kroah-Hartman S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git -F: drivers/tty/* +F: drivers/tty/ F: drivers/tty/serial/serial_core.c F: include/linux/serial_core.h F: include/linux/serial.h -- GitLab From 26aa38cafae0dbef3b2fe75ea487c83313c36d45 Mon Sep 17 00:00:00 2001 From: Lucas Kannebley Tavares Date: Mon, 9 Jan 2012 10:58:06 -0200 Subject: [PATCH 0194/1359] jsm: Fixed EEH recovery error There was an error on the jsm driver that would cause it to be unable to recover after a second error is detected. At the first error, the device recovers properly: [72521.485691] EEH: Detected PCI bus error on device 0003:02:00.0 [72521.485695] EEH: This PCI device has failed 1 times in the last hour: ... [72532.035693] ttyn3 at MMIO 0x0 (irq = 49) is a jsm [72532.105689] jsm: Port 3 added However, at the second error, it cascades until EEH disables the device: [72631.229549] Call Trace: ... [72641.725687] jsm: Port 3 added [72641.725695] EEH: Detected PCI bus error on device 0003:02:00.0 [72641.725698] EEH: This PCI device has failed 3 times in the last hour: It was caused because the PCI state was not being saved after the first restore. Therefore, at the second recovery the PCI state would not be restored. Signed-off-by: Lucas Kannebley Tavares Signed-off-by: Breno Leitao Acked-by: Thadeu Lima de Souza Cascardo Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/jsm/jsm_driver.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/tty/serial/jsm/jsm_driver.c b/drivers/tty/serial/jsm/jsm_driver.c index 7c867a046c97..7545fe1b9925 100644 --- a/drivers/tty/serial/jsm/jsm_driver.c +++ b/drivers/tty/serial/jsm/jsm_driver.c @@ -251,6 +251,7 @@ static void jsm_io_resume(struct pci_dev *pdev) struct jsm_board *brd = pci_get_drvdata(pdev); pci_restore_state(pdev); + pci_save_state(pdev); jsm_uart_port_init(brd); } -- GitLab From 0eee50af5b13e00b3fb7a5fe8480419a71b8235d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Thu, 12 Jan 2012 22:55:15 +0100 Subject: [PATCH 0195/1359] TTY: fix UV serial console regression Commit 74c2107759d (serial: Use block_til_ready helper) and its fixup 3f582b8c110 (serial: fix termios settings in open) introduced a regression on UV systems. The serial eventually freezes while being used. It's completely unpredictable and sometimes needs a heap of traffic to happen first. To reproduce this, yast installation was used as it turned out to be pretty reliable in reproducing. Especially during installation process where one doesn't have an SSH daemon running. And no monitor as the HW is completely headless. So this was fun to find. Given the machine doesn't boot on vanilla before 2.6.36 final. (And the commits above are older.) Unless there is some bad race in the code, the hardware seems to be pretty broken. Otherwise pure MSR read should not cause such a bug, or? So to prevent the bug, revert to the old behavior. I.e. read modem status only if we really have to -- for non-CLOCAL set serials. Non-CLOCAL works on this hardware OK, I tried. See? I don't. And document that shit. Signed-off-by: Jiri Slaby Cc: stable References: https://lkml.org/lkml/2011/12/6/573 References: https://bugzilla.novell.com/show_bug.cgi?id=718518 Signed-off-by: Greg Kroah-Hartman --- drivers/tty/tty_port.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/tty/tty_port.c b/drivers/tty/tty_port.c index ef9dd628ba0b..bf6e238146ae 100644 --- a/drivers/tty/tty_port.c +++ b/drivers/tty/tty_port.c @@ -227,7 +227,6 @@ int tty_port_block_til_ready(struct tty_port *port, int do_clocal = 0, retval; unsigned long flags; DEFINE_WAIT(wait); - int cd; /* block if port is in the process of being closed */ if (tty_hung_up_p(filp) || port->flags & ASYNC_CLOSING) { @@ -284,11 +283,14 @@ int tty_port_block_til_ready(struct tty_port *port, retval = -ERESTARTSYS; break; } - /* Probe the carrier. For devices with no carrier detect this - will always return true */ - cd = tty_port_carrier_raised(port); + /* + * Probe the carrier. For devices with no carrier detect + * tty_port_carrier_raised will always return true. + * Never ask drivers if CLOCAL is set, this causes troubles + * on some hardware. + */ if (!(port->flags & ASYNC_CLOSING) && - (do_clocal || cd)) + (do_clocal || tty_port_carrier_raised(port))) break; if (signal_pending(current)) { retval = -ERESTARTSYS; -- GitLab From fff24e21e17e438bf24791ed9cea7bbc02ad2dbb Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 23 Jan 2012 16:14:05 -0800 Subject: [PATCH 0196/1359] drm/i915: Correct debugfs printout for RC1e. We had two things in a row claiming to be RC6. Signed-off-by: Eric Anholt Reviewed-by: Keith Packard Reviewed-by: Ben Widawsky Reviewed-by: Eugeni Dodonov Reviewed-by: Kenneth Graunke Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index a017b989b1ab..60dcee3eda44 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -1106,7 +1106,7 @@ static int gen6_drpc_info(struct seq_file *m) seq_printf(m, "SW control enabled: %s\n", yesno((rpmodectl1 & GEN6_RP_MEDIA_MODE_MASK) == GEN6_RP_MEDIA_SW_MODE)); - seq_printf(m, "RC6 Enabled: %s\n", + seq_printf(m, "RC1e Enabled: %s\n", yesno(rcctl1 & GEN6_RC_CTL_RC1e_ENABLE)); seq_printf(m, "RC6 Enabled: %s\n", yesno(rcctl1 & GEN6_RC_CTL_RC6_ENABLE)); -- GitLab From 04115a9dee110b52a8eaa556c574022fa3bf4704 Mon Sep 17 00:00:00 2001 From: Eric Anholt Date: Mon, 23 Jan 2012 16:14:06 -0800 Subject: [PATCH 0197/1359] drm/i915: Re-enable gen7 RC6 and GPU turbo after resume. Signed-off-by: Eric Anholt Cc: stable@vger.kernel.org Reviewed-by: Keith Packard Reviewed-by: Eugeni Dodonov Reviewed-by: Kenneth Graunke Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_suspend.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c index 30d924f447c0..2b5eb229ff2c 100644 --- a/drivers/gpu/drm/i915/i915_suspend.c +++ b/drivers/gpu/drm/i915/i915_suspend.c @@ -827,7 +827,7 @@ int i915_save_state(struct drm_device *dev) if (IS_IRONLAKE_M(dev)) ironlake_disable_drps(dev); - if (IS_GEN6(dev)) + if (INTEL_INFO(dev)->gen >= 6) gen6_disable_rps(dev); /* Cache mode state */ @@ -886,7 +886,7 @@ int i915_restore_state(struct drm_device *dev) intel_init_emon(dev); } - if (IS_GEN6(dev)) { + if (INTEL_INFO(dev)->gen >= 6) { gen6_enable_rps(dev_priv); gen6_update_ring_freq(dev_priv); } -- GitLab From 075edca43b819c33bd755eaf7a3bd0e1b3279f70 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 24 Jan 2012 09:44:28 +0100 Subject: [PATCH 0198/1359] drm/i915: allow userspace forcewake references also on gen7 We need this to correctly access registers in the gt power well from userspace. Signed-Off-by: Daniel Vetter Reviewed-by: Eugeni Dodonov Reviewed-by: Keith Packard Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 60dcee3eda44..6b7204638603 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -1669,7 +1669,7 @@ static int i915_forcewake_open(struct inode *inode, struct file *file) struct drm_i915_private *dev_priv = dev->dev_private; int ret; - if (!IS_GEN6(dev)) + if (INTEL_INFO(dev)->gen < 6) return 0; ret = mutex_lock_interruptible(&dev->struct_mutex); @@ -1686,7 +1686,7 @@ int i915_forcewake_release(struct inode *inode, struct file *file) struct drm_device *dev = inode->i_private; struct drm_i915_private *dev_priv = dev->dev_private; - if (!IS_GEN6(dev)) + if (INTEL_INFO(dev)->gen < 6) return 0; /* -- GitLab From 48467a92215ced69a65c89c1b064dd84728a5ed0 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 24 Jan 2012 09:44:29 +0100 Subject: [PATCH 0199/1359] drm/i915: debugfs: show semaphore registers also on gen7 Corresponding changes to improve our error_state are pending some other patches to clean up things first. Signed-Off-by: Daniel Vetter Reviewed-by: Eugeni Dodonov Reviewed-by: Keith Packard Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_debugfs.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 6b7204638603..99f140798808 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -653,7 +653,7 @@ static int i915_ringbuffer_info(struct seq_file *m, void *data) seq_printf(m, " Size : %08x\n", ring->size); seq_printf(m, " Active : %08x\n", intel_ring_get_active_head(ring)); seq_printf(m, " NOPID : %08x\n", I915_READ_NOPID(ring)); - if (IS_GEN6(dev)) { + if (IS_GEN6(dev) || IS_GEN7(dev)) { seq_printf(m, " Sync 0 : %08x\n", I915_READ_SYNC_0(ring)); seq_printf(m, " Sync 1 : %08x\n", I915_READ_SYNC_1(ring)); } -- GitLab From 171cf94ccb4b476d1d7d694a31d0820558375132 Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 24 Jan 2012 21:33:26 +0000 Subject: [PATCH 0200/1359] PCMCIA: fix sa1111 oops on remove The sa1111 socket driver oopses when removed: Unable to handle kernel NULL pointer dereference at virtual address 000003b0 pgd = c1b40000 [000003b0] *pgd=00000000 Internal error: Oops: 41b43005 [#1] Modules linked in: CPU: 0 Not tainted (3.3.0-rc1+ #744) PC is at pcmcia_remove+0x3c/0x60 LR is at pcmcia_remove+0x34/0x60 This is because we try to dereference a NULL 's' to obtain the next pointer. Fix this. Signed-off-by: Russell King --- drivers/pcmcia/sa1111_generic.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pcmcia/sa1111_generic.c b/drivers/pcmcia/sa1111_generic.c index 59866905ea37..27f2fe3b7fb4 100644 --- a/drivers/pcmcia/sa1111_generic.c +++ b/drivers/pcmcia/sa1111_generic.c @@ -205,7 +205,8 @@ static int __devexit pcmcia_remove(struct sa1111_dev *dev) dev_set_drvdata(&dev->dev, NULL); - for (; next = s->next, s; s = next) { + for (; s; s = next) { + next = s->next; soc_pcmcia_remove_one(&s->soc); kfree(s); } -- GitLab From f54367f9de1b52000c008d3f68512f44cc392816 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 19 Jan 2012 22:35:05 +0100 Subject: [PATCH 0201/1359] Documentation/pinctrl: fix a few syntax errors in code examples MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Acked-by: Stephen Warren Signed-off-by: Uwe Kleine-König Signed-off-by: Linus Walleij --- Documentation/pinctrl.txt | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 6727b92bc2fb..5324d3199f34 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -857,42 +857,41 @@ case), we define a mapping like this: ... { - .name "2bit" + .name = "2bit" .ctrl_dev_name = "pinctrl-foo", .function = "mmc0", .group = "mmc0_1_grp", .dev_name = "foo-mmc.0", }, { - .name "4bit" + .name = "4bit" .ctrl_dev_name = "pinctrl-foo", .function = "mmc0", .group = "mmc0_1_grp", .dev_name = "foo-mmc.0", }, { - .name "4bit" + .name = "4bit" .ctrl_dev_name = "pinctrl-foo", .function = "mmc0", .group = "mmc0_2_grp", .dev_name = "foo-mmc.0", }, { - .name "8bit" + .name = "8bit" .ctrl_dev_name = "pinctrl-foo", - .function = "mmc0", .group = "mmc0_1_grp", .dev_name = "foo-mmc.0", }, { - .name "8bit" + .name = "8bit" .ctrl_dev_name = "pinctrl-foo", .function = "mmc0", .group = "mmc0_2_grp", .dev_name = "foo-mmc.0", }, { - .name "8bit" + .name = "8bit" .ctrl_dev_name = "pinctrl-foo", .function = "mmc0", .group = "mmc0_3_grp", @@ -995,7 +994,7 @@ This is enabled by simply setting the .hog_on_boot field in the map to true, like this: { - .name "POWERMAP" + .name = "POWERMAP" .ctrl_dev_name = "pinctrl-foo", .function = "power_func", .hog_on_boot = true, -- GitLab From f9d41d7cb5a3a4fe9585d47e518d779d2aef8c94 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 19 Jan 2012 22:42:48 +0100 Subject: [PATCH 0202/1359] pinctrl: unbreak error messages MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It's better to not line break error messages to allow easier grepping for them even when the line gets >80 chars. Additionally some minor reformating is done. Signed-off-by: Uwe Kleine-König Signed-off-by: Linus Walleij --- drivers/pinctrl/pinmux.c | 46 +++++++++++++++++----------------------- 1 file changed, 19 insertions(+), 27 deletions(-) diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index a76a348321bb..0b22037965b9 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -152,8 +152,7 @@ static int pin_request(struct pinctrl_dev *pctldev, status = 0; if (status) - dev_err(pctldev->dev, "->request on device %s failed " - "for pin %d\n", + dev_err(pctldev->dev, "->request on device %s failed for pin %d\n", pctldev->desc->name, pin); out_free_pin: if (status) { @@ -355,21 +354,20 @@ int __init pinmux_register_mappings(struct pinmux_map const *maps, /* First sanity check the new mapping */ for (i = 0; i < num_maps; i++) { if (!maps[i].name) { - pr_err("failed to register map %d: " - "no map name given\n", i); + pr_err("failed to register map %d: no map name given\n", + i); return -EINVAL; } if (!maps[i].ctrl_dev && !maps[i].ctrl_dev_name) { - pr_err("failed to register map %s (%d): " - "no pin control device given\n", + pr_err("failed to register map %s (%d): no pin control device given\n", maps[i].name, i); return -EINVAL; } if (!maps[i].function) { - pr_err("failed to register map %s (%d): " - "no function ID given\n", maps[i].name, i); + pr_err("failed to register map %s (%d): no function ID given\n", + maps[i].name, i); return -EINVAL; } @@ -442,8 +440,7 @@ static int acquire_pins(struct pinctrl_dev *pctldev, ret = pin_request(pctldev, pins[i], func, NULL); if (ret) { dev_err(pctldev->dev, - "could not get pin %d for function %s " - "on device %s - conflicting mux mappings?\n", + "could not get pin %d for function %s on device %s - conflicting mux mappings?\n", pins[i], func ? : "(undefined)", pinctrl_dev_get_name(pctldev)); /* On error release all taken pins */ @@ -473,8 +470,7 @@ static void release_pins(struct pinctrl_dev *pctldev, ret = pctlops->get_group_pins(pctldev, group_selector, &pins, &num_pins); if (ret) { - dev_err(pctldev->dev, "could not get pins to release for " - "group selector %d\n", + dev_err(pctldev->dev, "could not get pins to release for group selector %d\n", group_selector); return; } @@ -526,8 +522,7 @@ static int pinmux_check_pin_group(struct pinctrl_dev *pctldev, ret = pinctrl_get_group_selector(pctldev, groups[0]); if (ret < 0) { dev_err(pctldev->dev, - "function %s wants group %s but the pin " - "controller does not seem to have that group\n", + "function %s wants group %s but the pin controller does not seem to have that group\n", pmxops->get_function_name(pctldev, func_selector), groups[0]); return ret; @@ -535,8 +530,7 @@ static int pinmux_check_pin_group(struct pinctrl_dev *pctldev, if (num_groups > 1) dev_dbg(pctldev->dev, - "function %s support more than one group, " - "default-selecting first group %s (%d)\n", + "function %s support more than one group, default-selecting first group %s (%d)\n", pmxops->get_function_name(pctldev, func_selector), groups[0], ret); @@ -628,10 +622,8 @@ static int pinmux_enable_muxmap(struct pinctrl_dev *pctldev, if (pmx->pctldev && pmx->pctldev != pctldev) { dev_err(pctldev->dev, - "different pin control devices given for device %s, " - "function %s\n", - devname, - map->function); + "different pin control devices given for device %s, function %s\n", + devname, map->function); return -EINVAL; } pmx->dev = dev; @@ -695,7 +687,6 @@ static void pinmux_free_groups(struct pinmux *pmx) */ struct pinmux *pinmux_get(struct device *dev, const char *name) { - struct pinmux_map const *map = NULL; struct pinctrl_dev *pctldev = NULL; const char *devname = NULL; @@ -745,8 +736,7 @@ struct pinmux *pinmux_get(struct device *dev, const char *name) else if (map->ctrl_dev_name) devname = map->ctrl_dev_name; - pr_warning("could not find a pinctrl device for pinmux " - "function %s, fishy, they shall all have one\n", + pr_warning("could not find a pinctrl device for pinmux function %s, fishy, they shall all have one\n", map->function); pr_warning("given pinctrl device name: %s", devname ? devname : "UNDEFINED"); @@ -932,8 +922,8 @@ static int pinmux_hog_map(struct pinctrl_dev *pctldev, * without any problems, so then we can hog pinmuxes for * all devices that just want a static pin mux at this point. */ - dev_err(pctldev->dev, "map %s wants to hog a non-system " - "pinmux, this is not going to work\n", map->name); + dev_err(pctldev->dev, "map %s wants to hog a non-system pinmux, this is not going to work\n", + map->name); return -EINVAL; } @@ -1122,13 +1112,15 @@ static int pinmux_show(struct seq_file *s, void *what) seq_printf(s, "device: %s function: %s (%u),", pinctrl_dev_get_name(pmx->pctldev), - pmxops->get_function_name(pctldev, pmx->func_selector), + pmxops->get_function_name(pctldev, + pmx->func_selector), pmx->func_selector); seq_printf(s, " groups: ["); list_for_each_entry(grp, &pmx->groups, node) { seq_printf(s, " %s (%u)", - pctlops->get_group_name(pctldev, grp->group_selector), + pctlops->get_group_name(pctldev, + grp->group_selector), grp->group_selector); } seq_printf(s, " ]"); -- GitLab From 0215716083cac67ff7ea3e3efdc9943bdb462274 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 20 Jan 2012 08:17:22 -0800 Subject: [PATCH 0203/1359] pinctrl: free debugfs entries when unloading a pinmux driver We were not cleaning up properly after unloading a pinmux driver compiled as module. Signed-off-by: Tony Lindgren Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 14 +++++++++++++- drivers/pinctrl/core.h | 3 +++ 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 569bdb3ef104..d9d35fcbfc6b 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -510,10 +510,12 @@ static struct dentry *debugfs_root; static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev) { - static struct dentry *device_root; + struct dentry *device_root; device_root = debugfs_create_dir(dev_name(pctldev->dev), debugfs_root); + pctldev->device_root = device_root; + if (IS_ERR(device_root) || !device_root) { pr_warn("failed to create debugfs directory for %s\n", dev_name(pctldev->dev)); @@ -529,6 +531,11 @@ static void pinctrl_init_device_debugfs(struct pinctrl_dev *pctldev) pinconf_init_device_debugfs(device_root, pctldev); } +static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev) +{ + debugfs_remove_recursive(pctldev->device_root); +} + static void pinctrl_init_debugfs(void) { debugfs_root = debugfs_create_dir("pinctrl", NULL); @@ -553,6 +560,10 @@ static void pinctrl_init_debugfs(void) { } +static void pinctrl_remove_device_debugfs(struct pinctrl_dev *pctldev) +{ +} + #endif /** @@ -641,6 +652,7 @@ void pinctrl_unregister(struct pinctrl_dev *pctldev) if (pctldev == NULL) return; + pinctrl_remove_device_debugfs(pctldev); pinmux_unhog_maps(pctldev); /* TODO: check that no pinmuxes are still active? */ mutex_lock(&pinctrldev_list_mutex); diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h index 177a3310547f..cfa86da6b4b1 100644 --- a/drivers/pinctrl/core.h +++ b/drivers/pinctrl/core.h @@ -41,6 +41,9 @@ struct pinctrl_dev { struct device *dev; struct module *owner; void *driver_data; +#ifdef CONFIG_DEBUG_FS + struct dentry *device_root; +#endif #ifdef CONFIG_PINMUX struct mutex pinmux_hogs_lock; struct list_head pinmux_hogs; -- GitLab From 3bc4f0d8f65b396d214a31195a91c0394c5bf628 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Mon, 16 Jan 2012 15:52:36 +0530 Subject: [PATCH 0204/1359] omap-serial :Make the suspend/resume functions depend on CONFIG_PM_SLEEP. The macro SET_SYSTEM_SLEEP_PM_OPS depends CONFIG_PM_SLEEP. The patch defines the suspend and resume functions for CONFIG_PM_SLEEP instead of CONFIG_SUSPEND. Signed-off-by: Shubhrajyoti D Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index d192dcbb82f5..33e3360023b3 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1160,7 +1160,7 @@ static struct uart_driver serial_omap_reg = { .cons = OMAP_CONSOLE, }; -#ifdef CONFIG_SUSPEND +#ifdef CONFIG_PM_SLEEP static int serial_omap_suspend(struct device *dev) { struct uart_omap_port *up = dev_get_drvdata(dev); -- GitLab From b5148856a2f732e7e99edad22bb8e2037af28ad3 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Mon, 16 Jan 2012 15:52:37 +0530 Subject: [PATCH 0205/1359] omap-serial: make serial_omap_restore_context depend on CONFIG_PM_RUNTIME The function serial_omap_restore_context is called only from serial_omap_runtime_resume which depends on CONFIG_PM_RUNTIME. Make serial_omap_restore_context also compile conditionally. if CONFIG_PM_RUNTIME is not defined below warn may be seen. LD net/xfrm/built-in.o drivers/tty/serial/omap-serial.c:1524: warning: 'serial_omap_restore_context' defined but not used CC drivers/tty/vt/selection.o Acked-by: Govindraj.R Signed-off-by: Shubhrajyoti D Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 33e3360023b3..1c2426931484 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1521,6 +1521,7 @@ static void serial_omap_mdr1_errataset(struct uart_omap_port *up, u8 mdr1) } } +#ifdef CONFIG_PM_RUNTIME static void serial_omap_restore_context(struct uart_omap_port *up) { if (up->errata & UART_ERRATA_i202_MDR1_ACCESS) @@ -1550,7 +1551,6 @@ static void serial_omap_restore_context(struct uart_omap_port *up) serial_out(up, UART_OMAP_MDR1, up->mdr1); } -#ifdef CONFIG_PM_RUNTIME static int serial_omap_runtime_suspend(struct device *dev) { struct uart_omap_port *up = dev_get_drvdata(dev); -- GitLab From 0a697b22252c9d7208b5fb3e9fbd124dd229f1d2 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sat, 21 Jan 2012 00:27:40 -0700 Subject: [PATCH 0206/1359] tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode Ensure FIFO levels are set correctly in non-DMA mode (the default). This patch will cause a receive FIFO threshold interrupt to be raised when there is at least one byte in the RX FIFO. It will also cause a transmit FIFO threshold interrupt when there is only one byte remaining in the TX FIFO. These changes fix the receive interrupt problem and part of the transmit interrupt problem. A separate set of issues must be worked around for the transmit path to have a basic level of functionality; a subsequent patch will address these. DMA operation is unaffected by this patch. Signed-off-by: Paul Walmsley Cc: Tomi Valkeinen Cc: Govindraj Raja Cc: Kevin Hilman Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 35 ++++++++++++++++++++++++++++---- 1 file changed, 31 insertions(+), 4 deletions(-) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 1c2426931484..ca54f038ab45 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -46,6 +46,18 @@ #define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/ +/* SCR register bitmasks */ +#define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7) +#define OMAP_UART_SCR_TX_TRIG_GRANU1_MASK (1 << 6) + +/* FCR register bitmasks */ +#define OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT 6 +#define OMAP_UART_FCR_RX_FIFO_TRIG_MASK (0x3 << 6) +#define OMAP_UART_FCR_TX_FIFO_TRIG_SHIFT 4 + +/* TLR register bitmasks */ +#define OMAP_UART_TLR_TX_FIFO_TRIG_DMA_SHIFT 0 + static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; /* Forward declaration of functions */ @@ -694,6 +706,7 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, unsigned char efr = 0; unsigned long flags = 0; unsigned int baud, quot; + u32 tlr; switch (termios->c_cflag & CSIZE) { case CS5: @@ -811,14 +824,28 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, up->mcr = serial_in(up, UART_MCR); serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); /* FIFO ENABLE, DMA MODE */ - serial_out(up, UART_FCR, up->fcr); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + + up->scr |= OMAP_UART_SCR_TX_TRIG_GRANU1_MASK; + up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK; if (up->use_dma) { - serial_out(up, UART_TI752_TLR, 0); - up->scr |= (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8); + tlr = 0; + } else { + up->scr &= ~OMAP_UART_SCR_TX_EMPTY; + + /* Set receive FIFO threshold to 1 */ + up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK; + up->fcr |= (0x1 << OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT); + + /* Set TX FIFO threshold to "63" (actually 1) */ + up->fcr |= (0x3 << OMAP_UART_FCR_TX_FIFO_TRIG_SHIFT); + tlr = (0xf << OMAP_UART_TLR_TX_FIFO_TRIG_DMA_SHIFT); } + serial_out(up, UART_TI752_TLR, tlr); + serial_out(up, UART_FCR, up->fcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); + serial_out(up, UART_OMAP_SCR, up->scr); serial_out(up, UART_EFR, up->efr); -- GitLab From 43cf7c0bebf50d0b68aa42ae6d24cf08e3f24823 Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Sat, 21 Jan 2012 00:27:41 -0700 Subject: [PATCH 0207/1359] tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip It seems that when the transmit FIFO threshold is reached on OMAP UARTs, it does not result in a PRCM wakeup. This appears to be a silicon bug. This means that if the MPU powerdomain is in a low-power state, the MPU will not be awakened to refill the FIFO until the next interrupt from another device. The best solution, at least for the short term, would be for the OMAP serial driver to call a OMAP subarchitecture function to prevent the MPU powerdomain from entering a low power state while the FIFO has data to transmit. However, we no longer have a clean way to do this, since patches that add platform_data function pointers have been deprecated by the OMAP maintainer. So we attempt to work around this as well. The workarounds depend on the setting of CONFIG_CPU_IDLE. When CONFIG_CPU_IDLE=n, the driver will now only transmit one byte at a time. This causes the transmit FIFO threshold interrupt to stay active until there is no more data to be sent. Thus, the MPU powerdomain stays on during transmits. Aside from that energy consumption penalty, each transmitted byte results in a huge number of UART interrupts -- about five per byte. This wastes CPU time and is quite inefficient, but is probably the most expedient workaround in this case. When CONFIG_CPU_IDLE=y, there is a slightly more direct workaround: the PM QoS constraint can be abused to keep the MPU powerdomain on. This results in a normal number of interrupts, but, similar to the above workaround, wastes power by preventing the MPU from entering WFI. Future patches are planned for the 3.4 merge window to implement more efficient, but also more disruptive, workarounds to these problems. DMA operation is unaffected by this patch. Signed-off-by: Paul Walmsley Cc: Tomi Valkeinen Cc: Govindraj Raja Cc: Kevin Hilman Signed-off-by: Greg Kroah-Hartman --- arch/arm/plat-omap/include/plat/omap-serial.h | 1 + drivers/tty/serial/omap-serial.c | 51 ++++++++++++++++++- 2 files changed, 51 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 9ff444469f3d..12a64eb8c624 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -131,6 +131,7 @@ struct uart_omap_port { u32 context_loss_cnt; u32 errata; u8 wakeups_enabled; + u8 max_tx_count; struct pm_qos_request pm_qos_request; u32 latency; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index ca54f038ab45..e00ac05cfdb4 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -88,6 +88,49 @@ static inline void serial_omap_clear_fifos(struct uart_omap_port *up) serial_out(up, UART_FCR, 0); } +/** + * serial_omap_block_cpu_low_power_state - prevent MPU pwrdm from leaving ON + * @up: struct uart_omap_port * + * + * Prevent the MPU powerdomain from entering a power state lower than + * ON. (It should be sufficient to prevent it from entering INACTIVE, + * but there is presently no easy way to do this.) This works around + * a suspected silicon bug in the OMAP UART IP blocks. The UARTs should + * wake the PRCM when the transmit FIFO threshold interrupt is raised, but + * they do not. See also serial_omap_allow_cpu_low_power_state(). No + * return value. + */ +static void serial_omap_block_cpu_low_power_state(struct uart_omap_port *up) +{ +#ifdef CONFIG_CPU_IDLE + up->latency = 1; + schedule_work(&up->qos_work); +#else + up->max_tx_count = 1; +#endif +} + +/** + * serial_omap_allow_cpu_low_power_state - remove power state restriction on MPU + * @up: struct uart_omap_port * + * + * Cancel the effects of serial_omap_block_cpu_low_power_state(). + * This should allow the MPU powerdomain to enter a power state lower + * than ON, assuming the rest of the kernel is not restricting it. + * This works around a suspected silicon bug in the OMAP UART IP + * blocks. The UARTs should wake the PRCM when the transmit FIFO + * threshold interrupt is raised, but they do not. No return value. + */ +static void serial_omap_allow_cpu_low_power_state(struct uart_omap_port *up) +{ +#ifdef CONFIG_CPU_IDLE + up->latency = up->calc_latency; + schedule_work(&up->qos_work); +#else + up->max_tx_count = up->port.fifosize / 4; +#endif +} + /* * serial_omap_get_divisor - calculate divisor value * @port: uart port info @@ -163,6 +206,9 @@ static void serial_omap_stop_tx(struct uart_port *port) serial_out(up, UART_IER, up->ier); } + if (!up->use_dma) + serial_omap_allow_cpu_low_power_state(up); + pm_runtime_mark_last_busy(&up->pdev->dev); pm_runtime_put_autosuspend(&up->pdev->dev); } @@ -264,7 +310,7 @@ static void transmit_chars(struct uart_omap_port *up) serial_omap_stop_tx(&up->port); return; } - count = up->port.fifosize / 4; + count = up->max_tx_count; do { serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -297,6 +343,7 @@ static void serial_omap_start_tx(struct uart_port *port) if (!up->use_dma) { pm_runtime_get_sync(&up->pdev->dev); + serial_omap_block_cpu_low_power_state(up); serial_omap_enable_ier_thri(up); pm_runtime_mark_last_busy(&up->pdev->dev); pm_runtime_put_autosuspend(&up->pdev->dev); @@ -1421,6 +1468,8 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.fifosize = 64; up->port.ops = &serial_omap_pops; + up->max_tx_count = up->port.fifosize / 4; + if (pdev->dev.of_node) up->port.line = of_alias_get_id(pdev->dev.of_node, "serial"); else -- GitLab From 0dd2b62ada6f911fbd13e98e98f57f4edc42c604 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 10 Jan 2012 13:13:50 -0200 Subject: [PATCH 0208/1359] drivers: usb: Fix dependency for USB_HWA_HCD Fix the following build warning: warning: (USB_HWA_HCD) selects UWB_HWA which has unmet direct dependencies (UWB && USB) Signed-off-by: Fabio Estevam Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 91413cac97be..cc12dc2e5024 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -559,7 +559,7 @@ config USB_WHCI_HCD config USB_HWA_HCD tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)" depends on EXPERIMENTAL - depends on USB + depends on USB && UWB select USB_WUSB select UWB_HWA help -- GitLab From 3a0bac0676d7f433c12389fc0bc574f048f921c3 Mon Sep 17 00:00:00 2001 From: Alessandro Rubini Date: Fri, 6 Jan 2012 13:33:28 +0100 Subject: [PATCH 0209/1359] usb: add support for STA2X11 host driver Signed-off-by: Alessandro Rubini Acked-by: Giancarlo Asnaghi Cc: Alan Cox Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-pci.c | 6 ++++++ drivers/usb/host/ohci-pci.c | 4 ++++ 2 files changed, 10 insertions(+) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index f4b627d343ac..01bb7241d6ef 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -276,6 +276,9 @@ static int ehci_pci_setup(struct usb_hcd *hcd) /* Serial Bus Release Number is at PCI 0x60 offset */ pci_read_config_byte(pdev, 0x60, &ehci->sbrn); + if (pdev->vendor == PCI_VENDOR_ID_STMICRO + && pdev->device == PCI_DEVICE_ID_STMICRO_USB_HOST) + ehci->sbrn = 0x20; /* ConneXT has no sbrn register */ /* Keep this around for a while just in case some EHCI * implementation uses legacy PCI PM support. This test @@ -526,6 +529,9 @@ static const struct pci_device_id pci_ids [] = { { /* handle any USB 2.0 EHCI controller */ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_EHCI, ~0), .driver_data = (unsigned long) &ehci_pci_hc_driver, + }, { + PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_HOST), + .driver_data = (unsigned long) &ehci_pci_hc_driver, }, { /* end: all zeroes */ } }; diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 6109810cc2d3..1843bb68ac7c 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -397,6 +397,10 @@ static const struct pci_device_id pci_ids [] = { { /* handle any USB OHCI controller */ PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_OHCI, ~0), .driver_data = (unsigned long) &ohci_pci_hc_driver, + }, { + /* The device in the ConneXT I/O hub has no class reg */ + PCI_VDEVICE(STMICRO, PCI_DEVICE_ID_STMICRO_USB_OHCI), + .driver_data = (unsigned long) &ohci_pci_hc_driver, }, { /* end: all zeroes */ } }; MODULE_DEVICE_TABLE (pci, pci_ids); -- GitLab From 15699e6fafc3a90e5fdc2ef30555a04dee62286f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Fri, 20 Jan 2012 01:49:57 +0100 Subject: [PATCH 0210/1359] USB: cdc-wdm: Avoid hanging on interface with no USB_CDC_DMM_TYPE MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The probe does not strictly require the USB_CDC_DMM_TYPE descriptor, which is a good thing as it makes the driver usable on non-conforming interfaces. A user could e.g. bind to it to a CDC ECM interface by using the new_id and bind sysfs files. But this would fail with a 0 buffer length due to the missing descriptor. Fix by defining a reasonable fallback size: The minimum device receive buffer size required by the CDC WMC standard, revision 1.1 Signed-off-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index a940ad9d0d8f..d2b3cffca3f7 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -57,6 +57,8 @@ MODULE_DEVICE_TABLE (usb, wdm_ids); #define WDM_MAX 16 +/* CDC-WMC r1.1 requires wMaxCommand to be "at least 256 decimal (0x100)" */ +#define WDM_DEFAULT_BUFSIZE 256 static DEFINE_MUTEX(wdm_mutex); @@ -636,7 +638,7 @@ static int wdm_probe(struct usb_interface *intf, const struct usb_device_id *id) struct usb_cdc_dmm_desc *dmhd; u8 *buffer = intf->altsetting->extra; int buflen = intf->altsetting->extralen; - u16 maxcom = 0; + u16 maxcom = WDM_DEFAULT_BUFSIZE; if (!buffer) goto out; -- GitLab From 2053c2d1b116282038fde3d60965ac158b1b8ba2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Sun, 15 Jan 2012 12:36:16 +0100 Subject: [PATCH 0211/1359] usb: mv-otg - Fix build if CONFIG_USB is not set ERROR: "usb_remove_hcd" [drivers/usb/otg/mv_otg.ko] undefined! ERROR: "usb_add_hcd" [drivers/usb/otg/mv_otg.ko] undefined! Signed-off-by: Geert Uytterhoeven -- Inpired by drivers/usb/otg/msm_otg.c. Is this correct? drivers/usb/otg/mv_otg.c | 2 ++ 1 files changed, 2 insertions(+), 0 deletions(-) Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/mv_otg.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/usb/otg/mv_otg.c b/drivers/usb/otg/mv_otg.c index db0d4fcdc8e2..b5fbe1452ab0 100644 --- a/drivers/usb/otg/mv_otg.c +++ b/drivers/usb/otg/mv_otg.c @@ -202,6 +202,7 @@ static void mv_otg_init_irq(struct mv_otg *mvotg) static void mv_otg_start_host(struct mv_otg *mvotg, int on) { +#ifdef CONFIG_USB struct otg_transceiver *otg = &mvotg->otg; struct usb_hcd *hcd; @@ -216,6 +217,7 @@ static void mv_otg_start_host(struct mv_otg *mvotg, int on) usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); else usb_remove_hcd(hcd); +#endif /* CONFIG_USB */ } static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on) -- GitLab From 0c8b92f7f25927808fb465474e344b759bade612 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 24 Jan 2012 15:32:34 -0800 Subject: [PATCH 0212/1359] Revert "drivers: usb: Fix dependency for USB_HWA_HCD" This reverts commit 0dd2b62ada6f911fbd13e98e98f57f4edc42c604. It causes a bunch of Kconfig errors: drivers/usb/host/Kconfig:559:error: recursive dependency detected! drivers/usb/host/Kconfig:559: symbol USB_HWA_HCD depends on UWB drivers/uwb/Kconfig:5: symbol UWB is selected by USB_WUSB drivers/usb/wusbcore/Kconfig:4: symbol USB_WUSB is selected by USB_HWA_HCD showing that this really wasn't the correct fix at all. Cc: Fabio Estevam Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index cc12dc2e5024..91413cac97be 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -559,7 +559,7 @@ config USB_WHCI_HCD config USB_HWA_HCD tristate "Host Wire Adapter (HWA) driver (EXPERIMENTAL)" depends on EXPERIMENTAL - depends on USB && UWB + depends on USB select USB_WUSB select UWB_HWA help -- GitLab From 074cc73506f529f39fef32ad1c9e1d4cdd8acf6c Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 24 Jan 2012 17:16:54 -0600 Subject: [PATCH 0213/1359] qcaux: add more Pantech UML190 and UML290 ports More ports we now know how to talk to. Signed-off-by: Dan Williams Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcaux.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/usb/serial/qcaux.c b/drivers/usb/serial/qcaux.c index 30b73e68a904..a34819884c1a 100644 --- a/drivers/usb/serial/qcaux.c +++ b/drivers/usb/serial/qcaux.c @@ -36,6 +36,7 @@ #define UTSTARCOM_PRODUCT_UM175_V1 0x3712 #define UTSTARCOM_PRODUCT_UM175_V2 0x3714 #define UTSTARCOM_PRODUCT_UM175_ALLTEL 0x3715 +#define PANTECH_PRODUCT_UML190_VZW 0x3716 #define PANTECH_PRODUCT_UML290_VZW 0x3718 /* CMOTECH devices */ @@ -67,7 +68,11 @@ static struct usb_device_id id_table[] = { { USB_DEVICE_AND_INTERFACE_INFO(LG_VENDOR_ID, LG_PRODUCT_VX4400_6000, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SANYO_VENDOR_ID, SANYO_PRODUCT_KATANA_LX, 0xff, 0xff, 0x00) }, { USB_DEVICE_AND_INTERFACE_INFO(SAMSUNG_VENDOR_ID, SAMSUNG_PRODUCT_U520, 0xff, 0x00, 0x00) }, - { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML190_VZW, 0xff, 0xfe, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfd, 0xff) }, /* NMEA */ + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xfe, 0xff) }, /* WMC */ + { USB_DEVICE_AND_INTERFACE_INFO(UTSTARCOM_VENDOR_ID, PANTECH_PRODUCT_UML290_VZW, 0xff, 0xff, 0xff) }, /* DIAG */ { }, }; MODULE_DEVICE_TABLE(usb, id_table); -- GitLab From d8d8ffa477831b713ddfa2ad4d0ca545f3b567e5 Mon Sep 17 00:00:00 2001 From: Shreshtha Kumar Sahu Date: Wed, 18 Jan 2012 15:53:59 +0530 Subject: [PATCH 0214/1359] amba-pl011: do not disable RTS during shutdown In present driver, shutdown clears RTS and DTR in CR register. But the documentation "Documentation/serial/driver" suggests not to disable RTS and DTR in shutdown(). Also RTS and DTR is preserved between shutdown and startup calls, i.e. these are restored in startup if they were enabled while doing shutdown. So that if RTS and DTR are set using pl011_set_mctrl then it should continue even after shutdown->startup sequence. For throttling/unthrottling user should call pl011_set_mctrl. Signed-off-by: Shreshtha Kumar Sahu Acked-by: Linus Walleij Acked-by: Russell King Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 9ae024025ff3..ce843d058e02 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -159,6 +159,7 @@ struct uart_amba_port { unsigned int fifosize; /* vendor-specific */ unsigned int lcrh_tx; /* vendor-specific */ unsigned int lcrh_rx; /* vendor-specific */ + unsigned int old_cr; /* state during shutdown */ bool autorts; char type[12]; bool interrupt_may_hang; /* vendor-specific */ @@ -1411,7 +1412,9 @@ static int pl011_startup(struct uart_port *port) while (readw(uap->port.membase + UART01x_FR) & UART01x_FR_BUSY) barrier(); - cr = UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; + /* restore RTS and DTR */ + cr = uap->old_cr & (UART011_CR_RTS | UART011_CR_DTR); + cr |= UART01x_CR_UARTEN | UART011_CR_RXE | UART011_CR_TXE; writew(cr, uap->port.membase + UART011_CR); /* Clear pending error interrupts */ @@ -1469,6 +1472,7 @@ static void pl011_shutdown_channel(struct uart_amba_port *uap, static void pl011_shutdown(struct uart_port *port) { struct uart_amba_port *uap = (struct uart_amba_port *)port; + unsigned int cr; /* * disable all interrupts @@ -1488,9 +1492,16 @@ static void pl011_shutdown(struct uart_port *port) /* * disable the port + * disable the port. It should not disable RTS and DTR. + * Also RTS and DTR state should be preserved to restore + * it during startup(). */ uap->autorts = false; - writew(UART01x_CR_UARTEN | UART011_CR_TXE, uap->port.membase + UART011_CR); + cr = readw(uap->port.membase + UART011_CR); + uap->old_cr = cr; + cr &= UART011_CR_RTS | UART011_CR_DTR; + cr |= UART01x_CR_UARTEN | UART011_CR_TXE; + writew(cr, uap->port.membase + UART011_CR); /* * disable break condition and fifos @@ -1905,6 +1916,7 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->vendor = vendor; uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; + uap->old_cr = 0; uap->fifosize = vendor->fifosize; uap->interrupt_may_hang = vendor->interrupt_may_hang; uap->port.dev = &dev->dev; -- GitLab From ef605fdb33883d687cff5ba75095a91b313b4966 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 17 Jan 2012 11:52:28 +0100 Subject: [PATCH 0215/1359] serial: amba-pl011: lock console writes against interrupts Protect against pl011_console_write() and the interrupt for the console UART running concurrently on different CPUs. Otherwise the console_write could spin for a long time waiting for the UART to become not busy, while the other CPU continuously services UART interrupts and keeps the UART busy. The checks for sysrq and oops_in_progress are taken from 8250.c. Cc: stable Signed-off-by: Rabin Vincent Reviewed-by: Srinidhi Kasagar Reviewed-by: Bibek Basu Reviewed-by: Shreshtha Kumar Sahu Signed-off-by: Linus Walleij Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index ce843d058e02..6800f5f26241 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1751,9 +1751,19 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) { struct uart_amba_port *uap = amba_ports[co->index]; unsigned int status, old_cr, new_cr; + unsigned long flags; + int locked = 1; clk_enable(uap->clk); + local_irq_save(flags); + if (uap->port.sysrq) + locked = 0; + else if (oops_in_progress) + locked = spin_trylock(&uap->port.lock); + else + spin_lock(&uap->port.lock); + /* * First save the CR then disable the interrupts */ @@ -1773,6 +1783,10 @@ pl011_console_write(struct console *co, const char *s, unsigned int count) } while (status & UART01x_FR_BUSY); writew(old_cr, uap->port.membase + UART011_CR); + if (locked) + spin_unlock(&uap->port.lock); + local_irq_restore(flags); + clk_disable(uap->clk); } -- GitLab From a5492e6591b8fdf171236046f9d6194f9bb4062b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 21 Jan 2012 11:03:16 -0800 Subject: [PATCH 0216/1359] docbook: don't use serial_core.h in device-drivers book Fix new kernel-doc warning. This file no longer contains kernel-doc comments. Warning(include/linux/serial_core.h): no structured comments found Signed-off-by: Randy Dunlap Cc: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- Documentation/DocBook/device-drivers.tmpl | 1 - 1 file changed, 1 deletion(-) diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index b638e50cf8f6..b330b327032a 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -216,7 +216,6 @@ X!Isound/sound_firmware.c 16x50 UART Driver -!Iinclude/linux/serial_core.h !Edrivers/tty/serial/serial_core.c !Edrivers/tty/serial/8250.c -- GitLab From ecd9d34a674b671f09f55b3365d852f75a1f598b Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Sun, 22 Jan 2012 23:24:15 -0500 Subject: [PATCH 0217/1359] c2port: fix build error for duramar2150 due to missing header. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This file needs the basic headers for resource management, otherwise we will see this build error: CC [M] drivers/misc/c2port/c2port-duramar2150.o drivers/misc/c2port/c2port-duramar2150.c: In function ‘duramar2150_c2port_init’: drivers/misc/c2port/c2port-duramar2150.c:125:2: error: implicit declaration of function ‘request_region’ [-Werror=implicit-function-declaration] drivers/misc/c2port/c2port-duramar2150.c:139:2: error: implicit declaration of function ‘release_region’ [-Werror=implicit-function-declaration] Signed-off-by: Paul Gortmaker Signed-off-by: Greg Kroah-Hartman --- drivers/misc/c2port/c2port-duramar2150.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/misc/c2port/c2port-duramar2150.c b/drivers/misc/c2port/c2port-duramar2150.c index 778fc3fdfb9b..5484301d57d9 100644 --- a/drivers/misc/c2port/c2port-duramar2150.c +++ b/drivers/misc/c2port/c2port-duramar2150.c @@ -15,6 +15,7 @@ #include #include #include +#include #include #define DATA_PORT 0x325 -- GitLab From 7c5763b8453a94871d356f20df30f350f8631e8b Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 24 Jan 2012 02:11:25 -0200 Subject: [PATCH 0218/1359] drivers: misc: Remove MISC_DEVICES config option MISC_DEVICES option alone does not select any kernel code and can cause dependency build warnings, such as: warning: (KS8851 && AX88796_93CX6 && RTL8180 && RTL8187 && ADM8211 && RT2400PCI && RT2500PCI && RT61PCI && RT2800PCI && R8187SE) selects EEPROM_93CX6 which has unmet direct dependencies (MISC_DEVICES) As the current drivers/misc/Kconfig stands, it is only possible to select the drivers below if MISC_DEVICES option is selected: source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" source "drivers/misc/cb710/Kconfig" source "drivers/misc/iwmc3200top/Kconfig" source "drivers/misc/ti-st/Kconfig" source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" So remove MISC_DEVICES option so that nothing is dependant on it. Signed-off-by: Fabio Estevam Acked-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/misc/Kconfig | 17 +++-------------- drivers/mmc/host/Kconfig | 1 - drivers/net/ethernet/micrel/Kconfig | 1 - 3 files changed, 3 insertions(+), 16 deletions(-) diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 6a1a092db146..c7795096d43b 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -2,24 +2,14 @@ # Misc strange devices # -# This one has to live outside of the MISC_DEVICES conditional, -# because it may be selected by drivers/platform/x86/hp_accel. +menu "Misc devices" + config SENSORS_LIS3LV02D tristate depends on INPUT select INPUT_POLLDEV default n -menuconfig MISC_DEVICES - bool "Misc devices" - ---help--- - Say Y here to get to see options for device drivers from various - different categories. This option alone does not add any kernel code. - - If you say N, all options in this submenu will be skipped and disabled. - -if MISC_DEVICES - config AD525X_DPOT tristate "Analog Devices Digital Potentiometers" depends on (I2C || SPI) && SYSFS @@ -516,5 +506,4 @@ source "drivers/misc/ti-st/Kconfig" source "drivers/misc/lis3lv02d/Kconfig" source "drivers/misc/carma/Kconfig" source "drivers/misc/altera-stapl/Kconfig" - -endif # MISC_DEVICES +endmenu diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index cf444b0ca2cc..00fcbed1afd2 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -477,7 +477,6 @@ config MMC_SDHI config MMC_CB710 tristate "ENE CB710 MMC/SD Interface support" depends on PCI - select MISC_DEVICES select CB710_CORE help This option enables support for MMC/SD part of ENE CB710/720 Flash diff --git a/drivers/net/ethernet/micrel/Kconfig b/drivers/net/ethernet/micrel/Kconfig index 1ea811cf515b..fe42fc00d8d3 100644 --- a/drivers/net/ethernet/micrel/Kconfig +++ b/drivers/net/ethernet/micrel/Kconfig @@ -42,7 +42,6 @@ config KS8851 select NET_CORE select MII select CRC32 - select MISC_DEVICES select EEPROM_93CX6 ---help--- SPI driver for Micrel KS8851 SPI attached network chip. -- GitLab From 773598357c0baf03081cf87f2b444f97744faf1e Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Thu, 19 Jan 2012 11:28:56 -0800 Subject: [PATCH 0219/1359] serial: Fix wakeup init logic to speed up startup The synchronize_rcu() call resulting from making every serial driver wake-up capable (commit b3b708fa) slows boot down on my Tegra2x system (with CONFIG_PREEMPT disabled). But this is avoidable since it is the device_set_wakeup_enable() and then subsequence disable which causes the delay. We might as well just make the device wakeup capable but not actually enable it for wakeup until needed. Effectively the current code does this: device_set_wakeup_capable(dev, 1); device_set_wakeup_enable(dev, 1); device_set_wakeup_enable(dev, 0); We can just drop the last two lines. Before this change my boot log says: [ 0.227062] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.702928] serial8250.0: ttyS0 at MMIO 0x70006040 (irq = 69) is a Tegra after: [ 0.227264] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 0.227983] serial8250.0: ttyS0 at MMIO 0x70006040 (irq = 69) is a Tegra for saving of 450ms. Suggested-by: Rafael J. Wysocki Acked-by: Rafael J. Wysocki Signed-off-by: Simon Glass Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/serial_core.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index c7bf31a6a7e7..13056180adf5 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -2348,11 +2348,11 @@ int uart_add_one_port(struct uart_driver *drv, struct uart_port *uport) */ tty_dev = tty_register_device(drv->tty_driver, uport->line, uport->dev); if (likely(!IS_ERR(tty_dev))) { - device_init_wakeup(tty_dev, 1); - device_set_wakeup_enable(tty_dev, 0); - } else + device_set_wakeup_capable(tty_dev, 1); + } else { printk(KERN_ERR "Cannot register tty device on line %d\n", uport->line); + } /* * Ensure UPF_DEAD is not set. -- GitLab From b30b3c60a25a4afbc49167ecb6210c291178ee5f Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 25 Jan 2012 10:02:46 +0200 Subject: [PATCH 0220/1359] usb: musb: omap2430: minor cleanups. 1/ remove incorrect comment (it is a non-blocking notifier) 2/ Use correct symbolic return value for notifier 3/ Make sure otg_notifier_work is cancelled before module exit. Signed-off-by: NeilBrown Signed-off-by: Felipe Balbi --- drivers/usb/musb/omap2430.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index c27bbbf32b52..df719eae3b03 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -222,7 +222,6 @@ static inline void omap2430_low_level_init(struct musb *musb) musb_writel(musb->mregs, OTG_FORCESTDBY, l); } -/* blocking notifier support */ static int musb_otg_notifications(struct notifier_block *nb, unsigned long event, void *unused) { @@ -231,7 +230,7 @@ static int musb_otg_notifications(struct notifier_block *nb, musb->xceiv_event = event; schedule_work(&musb->otg_notifier_work); - return 0; + return NOTIFY_OK; } static void musb_otg_notifier_work(struct work_struct *data_notifier_work) @@ -386,6 +385,7 @@ static void omap2430_musb_disable(struct musb *musb) static int omap2430_musb_exit(struct musb *musb) { del_timer_sync(&musb_idle_timer); + cancel_work_sync(&musb->otg_notifier_work); omap2430_low_level_exit(musb); otg_put_transceiver(musb->xceiv); -- GitLab From 3b25eb690e8c7424eecffe1458c02b87b32aa001 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Wed, 25 Jan 2012 09:55:46 +0100 Subject: [PATCH 0221/1359] ALSA: hda - Fix silent output on ASUS A6Rp The refactoring of Realtek codec driver in 3.2 kernel caused a regression for ASUS A6Rp laptop; it doesn't give any output. The reason was that this machine has a secret master mute (or EAPD) control via NID 0x0f VREF. Setting VREF50 on this node makes the sound working again. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42588 Cc: [v3.2+] Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c95c8bde12d0..a23479926f89 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5586,6 +5586,7 @@ static const struct hda_amp_list alc861_loopbacks[] = { /* Pin config fixes */ enum { PINFIX_FSC_AMILO_PI1505, + PINFIX_ASUS_A6RP, }; static const struct alc_fixup alc861_fixups[] = { @@ -5597,9 +5598,18 @@ static const struct alc_fixup alc861_fixups[] = { { } } }, + [PINFIX_ASUS_A6RP] = { + .type = ALC_FIXUP_VERBS, + .v.verbs = (const struct hda_verb[]) { + /* node 0x0f VREF seems controlling the master output */ + { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF50 }, + { } + }, + }, }; static const struct snd_pci_quirk alc861_fixup_tbl[] = { + SND_PCI_QUIRK(0x1043, 0x1393, "ASUS A6Rp", PINFIX_ASUS_A6RP), SND_PCI_QUIRK(0x1734, 0x10c7, "FSC Amilo Pi1505", PINFIX_FSC_AMILO_PI1505), {} }; -- GitLab From a6a600d10aaddf1da38053c4c6b64f50f56176e6 Mon Sep 17 00:00:00 2001 From: Gustavo Maciel Dias Vieira Date: Tue, 24 Jan 2012 13:27:56 -0200 Subject: [PATCH 0222/1359] ALSA: hda: set mute led polarity for laptops with buggy BIOS based on SSID HP laptop models with buggy BIOS are apparently frequent, including machines with different codecs. Set the polarity of the mute led based on the SSID and include an entry for the HP Mini 110-3100. Signed-off-by: Gustavo Maciel Dias Vieira Tested-by: Predrag Ivanovic Cc: [v3.2+] Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_sigmatel.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 336cfcd324f9..948f0be2f4f3 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -4870,7 +4870,14 @@ static int find_mute_led_cfg(struct hda_codec *codec, int default_polarity) /* BIOS bug: unfilled OEM string */ if (strstr(dev->name, "HP_Mute_LED_P_G")) { set_hp_led_gpio(codec); - spec->gpio_led_polarity = 1; + switch (codec->subsystem_id) { + case 0x103c148a: + spec->gpio_led_polarity = 0; + break; + default: + spec->gpio_led_polarity = 1; + break; + } return 1; } } -- GitLab From 34ae6c96a6a7db4ed8ec0524bf7fa1086b9ab2ba Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Tue, 24 Jan 2012 11:56:02 +0100 Subject: [PATCH 0223/1359] ARM: 7298/1: realview: fix mapping of MPCore private memory region Since commit 0536bdf33faf (ARM: move iotable mappings within the vmalloc region), the RealView PB11MP cannot boot anymore. This is caused by the way the mappings are described on this platform (define replaced by hex values for clarity): { /* GIC CPU interface mapping */ .virtual = IO_ADDRESS(0x1F000100), .pfn = __phys_to_pfn(0x1F000100), .length = SZ_4K, .type = MT_DEVICE, }, { /* GIC distributor mapping */ .virtual = IO_ADDRESS(0x1F001000), .pfn = __phys_to_pfn(0x1F001000), .length = SZ_4K, .type = MT_DEVICE, } The first mapping ends up reserving two pages, and clashes with the second one, which triggers a BUG_ON in vm_area_add_early(). In order to solve this problem, treat the MPCore private memory region (containing the SCU, the GIC and the TWD) as a single region, as described in the TRM: http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0360f/CACGDJJC.html The EB11MP is converted the same way, even if it manages to avoid the problem. Tested on both PB11MP and EB11MP. Signed-off-by: Marc Zyngier Signed-off-by: Russell King --- arch/arm/mach-realview/include/mach/board-eb.h | 18 ++++++++++-------- .../mach-realview/include/mach/board-pb11mp.h | 2 ++ arch/arm/mach-realview/realview_eb.c | 11 +++-------- arch/arm/mach-realview/realview_pb11mp.c | 13 ++++--------- 4 files changed, 19 insertions(+), 25 deletions(-) diff --git a/arch/arm/mach-realview/include/mach/board-eb.h b/arch/arm/mach-realview/include/mach/board-eb.h index 794a8d91a6a6..124bce6b4d7b 100644 --- a/arch/arm/mach-realview/include/mach/board-eb.h +++ b/arch/arm/mach-realview/include/mach/board-eb.h @@ -47,21 +47,23 @@ #define REALVIEW_EB_USB_BASE 0x4F000000 /* USB */ #ifdef CONFIG_REALVIEW_EB_ARM11MP_REVB -#define REALVIEW_EB11MP_SCU_BASE 0x10100000 /* SCU registers */ -#define REALVIEW_EB11MP_GIC_CPU_BASE 0x10100100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE 0x10100600 -#define REALVIEW_EB11MP_GIC_DIST_BASE 0x10101000 /* Generic interrupt controller distributor */ +#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x1F000000 #define REALVIEW_EB11MP_L220_BASE 0x10102000 /* L220 registers */ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0xD8 /* Register offset for MPCore sysctl */ #else -#define REALVIEW_EB11MP_SCU_BASE 0x1F000000 /* SCU registers */ -#define REALVIEW_EB11MP_GIC_CPU_BASE 0x1F000100 /* Generic interrupt controller CPU interface */ -#define REALVIEW_EB11MP_TWD_BASE 0x1F000600 -#define REALVIEW_EB11MP_GIC_DIST_BASE 0x1F001000 /* Generic interrupt controller distributor */ +#define REALVIEW_EB11MP_PRIV_MEM_BASE 0x1F000000 #define REALVIEW_EB11MP_L220_BASE 0x1F002000 /* L220 registers */ #define REALVIEW_EB11MP_SYS_PLD_CTRL1 0x74 /* Register offset for MPCore sysctl */ #endif +#define REALVIEW_EB11MP_PRIV_MEM_SIZE SZ_8K +#define REALVIEW_EB11MP_PRIV_MEM_OFF(x) (REALVIEW_EB11MP_PRIV_MEM_BASE + (x)) + +#define REALVIEW_EB11MP_SCU_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0) /* SCU registers */ +#define REALVIEW_EB11MP_GIC_CPU_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x0100) /* Generic interrupt controller CPU interface */ +#define REALVIEW_EB11MP_TWD_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x0600) +#define REALVIEW_EB11MP_GIC_DIST_BASE REALVIEW_EB11MP_PRIV_MEM_OFF(0x1000) /* Generic interrupt controller distributor */ + /* * Core tile identification (REALVIEW_SYS_PROCID) */ diff --git a/arch/arm/mach-realview/include/mach/board-pb11mp.h b/arch/arm/mach-realview/include/mach/board-pb11mp.h index 7abf918b77e9..aa2d4e02ea2c 100644 --- a/arch/arm/mach-realview/include/mach/board-pb11mp.h +++ b/arch/arm/mach-realview/include/mach/board-pb11mp.h @@ -75,6 +75,8 @@ /* * Testchip peripheral and fpga gic regions */ +#define REALVIEW_TC11MP_PRIV_MEM_BASE 0x1F000000 +#define REALVIEW_TC11MP_PRIV_MEM_SIZE SZ_8K #define REALVIEW_TC11MP_SCU_BASE 0x1F000000 /* IRQ, Test chip */ #define REALVIEW_TC11MP_GIC_CPU_BASE 0x1F000100 /* Test chip interrupt controller CPU interface */ #define REALVIEW_TC11MP_TWD_BASE 0x1F000600 diff --git a/arch/arm/mach-realview/realview_eb.c b/arch/arm/mach-realview/realview_eb.c index e62962117763..9578145f2df0 100644 --- a/arch/arm/mach-realview/realview_eb.c +++ b/arch/arm/mach-realview/realview_eb.c @@ -91,14 +91,9 @@ static struct map_desc realview_eb_io_desc[] __initdata = { static struct map_desc realview_eb11mp_io_desc[] __initdata = { { - .virtual = IO_ADDRESS(REALVIEW_EB11MP_SCU_BASE), - .pfn = __phys_to_pfn(REALVIEW_EB11MP_SCU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_EB11MP_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_EB11MP_GIC_DIST_BASE), - .length = SZ_4K, + .virtual = IO_ADDRESS(REALVIEW_EB11MP_PRIV_MEM_BASE), + .pfn = __phys_to_pfn(REALVIEW_EB11MP_PRIV_MEM_BASE), + .length = REALVIEW_EB11MP_PRIV_MEM_SIZE, .type = MT_DEVICE, }, { .virtual = IO_ADDRESS(REALVIEW_EB11MP_L220_BASE), diff --git a/arch/arm/mach-realview/realview_pb11mp.c b/arch/arm/mach-realview/realview_pb11mp.c index 127a3fd42ab1..2147335f66f5 100644 --- a/arch/arm/mach-realview/realview_pb11mp.c +++ b/arch/arm/mach-realview/realview_pb11mp.c @@ -64,15 +64,10 @@ static struct map_desc realview_pb11mp_io_desc[] __initdata = { .pfn = __phys_to_pfn(REALVIEW_PB11MP_GIC_DIST_BASE), .length = SZ_4K, .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_TC11MP_GIC_CPU_BASE), - .pfn = __phys_to_pfn(REALVIEW_TC11MP_GIC_CPU_BASE), - .length = SZ_4K, - .type = MT_DEVICE, - }, { - .virtual = IO_ADDRESS(REALVIEW_TC11MP_GIC_DIST_BASE), - .pfn = __phys_to_pfn(REALVIEW_TC11MP_GIC_DIST_BASE), - .length = SZ_4K, + }, { /* Maps the SCU, GIC CPU interface, TWD, GIC DIST */ + .virtual = IO_ADDRESS(REALVIEW_TC11MP_PRIV_MEM_BASE), + .pfn = __phys_to_pfn(REALVIEW_TC11MP_PRIV_MEM_BASE), + .length = REALVIEW_TC11MP_PRIV_MEM_SIZE, .type = MT_DEVICE, }, { .virtual = IO_ADDRESS(REALVIEW_SCTL_BASE), -- GitLab From d68133b5a81bd9c4b673c2a731ac1a33a9dc0cb8 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Tue, 24 Jan 2012 16:52:52 +0100 Subject: [PATCH 0224/1359] ARM: 7299/1: ftrace: clear zero bit in reported IPs for Thumb-2 The dynamic ftrace ops startup test currently fails on Thumb-2 kernels: Testing tracer function: PASSED Testing dynamic ftrace: PASSED Testing dynamic ftrace ops #1: (0 0 0 0 0) FAILED! This is because while the addresses in the mcount records do not have the zero bit set, the IP reported by the mcount call does have it set (because it is copied from the LR). This mismatch causes the ops filtering in ftrace_ops_list_func() to not call the relevant tracers. Fix this by clearing the zero bit before adjusting the LR for the mcount instruction size. Also, combine the mov+sub into a single sub instruction. Acked-by: Dave Martin Signed-off-by: Rabin Vincent Signed-off-by: Russell King --- arch/arm/kernel/entry-common.S | 15 +++++++++------ 1 file changed, 9 insertions(+), 6 deletions(-) diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 520889cf1b5b..9fd0ba90c1d2 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -149,6 +149,11 @@ ENDPROC(ret_from_fork) #endif #endif +.macro mcount_adjust_addr rd, rn + bic \rd, \rn, #1 @ clear the Thumb bit if present + sub \rd, \rd, #MCOUNT_INSN_SIZE +.endm + .macro __mcount suffix mcount_enter ldr r0, =ftrace_trace_function @@ -173,8 +178,7 @@ ENDPROC(ret_from_fork) mcount_exit 1: mcount_get_lr r1 @ lr of instrumented func - mov r0, lr @ instrumented function - sub r0, r0, #MCOUNT_INSN_SIZE + mcount_adjust_addr r0, lr @ instrumented function adr lr, BSYM(2f) mov pc, r2 2: mcount_exit @@ -184,8 +188,7 @@ ENDPROC(ret_from_fork) mcount_enter mcount_get_lr r1 @ lr of instrumented func - mov r0, lr @ instrumented function - sub r0, r0, #MCOUNT_INSN_SIZE + mcount_adjust_addr r0, lr @ instrumented function .globl ftrace_call\suffix ftrace_call\suffix: @@ -205,11 +208,11 @@ ftrace_graph_call\suffix: #ifdef CONFIG_DYNAMIC_FTRACE @ called from __ftrace_caller, saved in mcount_enter ldr r1, [sp, #16] @ instrumented routine (func) + mcount_adjust_addr r1, r1 #else @ called from __mcount, untouched in lr - mov r1, lr @ instrumented routine (func) + mcount_adjust_addr r1, lr @ instrumented routine (func) #endif - sub r1, r1, #MCOUNT_INSN_SIZE mov r2, fp @ frame pointer bl prepare_ftrace_return mcount_exit -- GitLab From 4e7682d077d693e34a993ae7a2831b522930ebcb Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Wed, 25 Jan 2012 11:38:13 +0100 Subject: [PATCH 0225/1359] ARM: 7301/1: Rename the T() macro to TUSER() to avoid namespace conflicts This macro is used to generate unprivileged accesses (LDRT/STRT) to user space. Signed-off-by: Catalin Marinas Acked-by: Nicolas Pitre Signed-off-by: Russell King --- arch/arm/include/asm/assembler.h | 4 +- arch/arm/include/asm/domain.h | 8 ++-- arch/arm/include/asm/futex.h | 8 ++-- arch/arm/include/asm/uaccess.h | 16 +++---- arch/arm/lib/getuser.S | 12 ++--- arch/arm/lib/putuser.S | 28 +++++------ arch/arm/lib/uaccess.S | 82 ++++++++++++++++---------------- 7 files changed, 79 insertions(+), 79 deletions(-) diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index b6e65dedfd71..62f8095d46de 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -237,7 +237,7 @@ */ #ifdef CONFIG_THUMB2_KERNEL - .macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=T() + .macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER() 9999: .if \inc == 1 \instr\cond\()b\()\t\().w \reg, [\ptr, #\off] @@ -277,7 +277,7 @@ #else /* !CONFIG_THUMB2_KERNEL */ - .macro usracc, instr, reg, ptr, inc, cond, rept, abort, t=T() + .macro usracc, instr, reg, ptr, inc, cond, rept, abort, t=TUSER() .rept \rept 9999: .if \inc == 1 diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h index af18ceaacf5d..b5dc173d336f 100644 --- a/arch/arm/include/asm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -83,9 +83,9 @@ * instructions (inline assembly) */ #ifdef CONFIG_CPU_USE_DOMAINS -#define T(instr) #instr "t" +#define TUSER(instr) #instr "t" #else -#define T(instr) #instr +#define TUSER(instr) #instr #endif #else /* __ASSEMBLY__ */ @@ -95,9 +95,9 @@ * instructions */ #ifdef CONFIG_CPU_USE_DOMAINS -#define T(instr) instr ## t +#define TUSER(instr) instr ## t #else -#define T(instr) instr +#define TUSER(instr) instr #endif #endif /* __ASSEMBLY__ */ diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 253cc86318bf..7be54690aeec 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -75,9 +75,9 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, #define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1, [%3]\n" \ + "1: " TUSER(ldr) " %1, [%3]\n" \ " " insn "\n" \ - "2: " T(str) " %0, [%3]\n" \ + "2: " TUSER(str) " %0, [%3]\n" \ " mov %0, #0\n" \ __futex_atomic_ex_table("%5") \ : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ @@ -95,10 +95,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, return -EFAULT; __asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n" - "1: " T(ldr) " %1, [%4]\n" + "1: " TUSER(ldr) " %1, [%4]\n" " teq %1, %2\n" " it eq @ explicit IT needed for the 2b label\n" - "2: " T(streq) " %3, [%4]\n" + "2: " TUSER(streq) " %3, [%4]\n" __futex_atomic_ex_table("%5") : "+r" (ret), "=&r" (val) : "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT) diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index b293616a1a1a..2958976d867b 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -227,7 +227,7 @@ do { \ #define __get_user_asm_byte(x,addr,err) \ __asm__ __volatile__( \ - "1: " T(ldrb) " %1,[%2],#0\n" \ + "1: " TUSER(ldrb) " %1,[%2],#0\n" \ "2:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ @@ -263,7 +263,7 @@ do { \ #define __get_user_asm_word(x,addr,err) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1,[%2],#0\n" \ + "1: " TUSER(ldr) " %1,[%2],#0\n" \ "2:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ @@ -308,7 +308,7 @@ do { \ #define __put_user_asm_byte(x,__pu_addr,err) \ __asm__ __volatile__( \ - "1: " T(strb) " %1,[%2],#0\n" \ + "1: " TUSER(strb) " %1,[%2],#0\n" \ "2:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ @@ -341,7 +341,7 @@ do { \ #define __put_user_asm_word(x,__pu_addr,err) \ __asm__ __volatile__( \ - "1: " T(str) " %1,[%2],#0\n" \ + "1: " TUSER(str) " %1,[%2],#0\n" \ "2:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ @@ -366,10 +366,10 @@ do { \ #define __put_user_asm_dword(x,__pu_addr,err) \ __asm__ __volatile__( \ - ARM( "1: " T(str) " " __reg_oper1 ", [%1], #4\n" ) \ - ARM( "2: " T(str) " " __reg_oper0 ", [%1]\n" ) \ - THUMB( "1: " T(str) " " __reg_oper1 ", [%1]\n" ) \ - THUMB( "2: " T(str) " " __reg_oper0 ", [%1, #4]\n" ) \ + ARM( "1: " TUSER(str) " " __reg_oper1 ", [%1], #4\n" ) \ + ARM( "2: " TUSER(str) " " __reg_oper0 ", [%1]\n" ) \ + THUMB( "1: " TUSER(str) " " __reg_oper1 ", [%1]\n" ) \ + THUMB( "2: " TUSER(str) " " __reg_oper0 ", [%1, #4]\n" ) \ "3:\n" \ " .pushsection .fixup,\"ax\"\n" \ " .align 2\n" \ diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 1b049cd7a49a..11093a7c3e32 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -31,18 +31,18 @@ #include ENTRY(__get_user_1) -1: T(ldrb) r2, [r0] +1: TUSER(ldrb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_1) ENTRY(__get_user_2) #ifdef CONFIG_THUMB2_KERNEL -2: T(ldrb) r2, [r0] -3: T(ldrb) r3, [r0, #1] +2: TUSER(ldrb) r2, [r0] +3: TUSER(ldrb) r3, [r0, #1] #else -2: T(ldrb) r2, [r0], #1 -3: T(ldrb) r3, [r0] +2: TUSER(ldrb) r2, [r0], #1 +3: TUSER(ldrb) r3, [r0] #endif #ifndef __ARMEB__ orr r2, r2, r3, lsl #8 @@ -54,7 +54,7 @@ ENTRY(__get_user_2) ENDPROC(__get_user_2) ENTRY(__get_user_4) -4: T(ldr) r2, [r0] +4: TUSER(ldr) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_4) diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index c023fc11e86c..7db25990c589 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -31,7 +31,7 @@ #include ENTRY(__put_user_1) -1: T(strb) r2, [r0] +1: TUSER(strb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_1) @@ -40,19 +40,19 @@ ENTRY(__put_user_2) mov ip, r2, lsr #8 #ifdef CONFIG_THUMB2_KERNEL #ifndef __ARMEB__ -2: T(strb) r2, [r0] -3: T(strb) ip, [r0, #1] +2: TUSER(strb) r2, [r0] +3: TUSER(strb) ip, [r0, #1] #else -2: T(strb) ip, [r0] -3: T(strb) r2, [r0, #1] +2: TUSER(strb) ip, [r0] +3: TUSER(strb) r2, [r0, #1] #endif #else /* !CONFIG_THUMB2_KERNEL */ #ifndef __ARMEB__ -2: T(strb) r2, [r0], #1 -3: T(strb) ip, [r0] +2: TUSER(strb) r2, [r0], #1 +3: TUSER(strb) ip, [r0] #else -2: T(strb) ip, [r0], #1 -3: T(strb) r2, [r0] +2: TUSER(strb) ip, [r0], #1 +3: TUSER(strb) r2, [r0] #endif #endif /* CONFIG_THUMB2_KERNEL */ mov r0, #0 @@ -60,18 +60,18 @@ ENTRY(__put_user_2) ENDPROC(__put_user_2) ENTRY(__put_user_4) -4: T(str) r2, [r0] +4: TUSER(str) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_4) ENTRY(__put_user_8) #ifdef CONFIG_THUMB2_KERNEL -5: T(str) r2, [r0] -6: T(str) r3, [r0, #4] +5: TUSER(str) r2, [r0] +6: TUSER(str) r3, [r0, #4] #else -5: T(str) r2, [r0], #4 -6: T(str) r3, [r0] +5: TUSER(str) r2, [r0], #4 +6: TUSER(str) r3, [r0] #endif mov r0, #0 mov pc, lr diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S index d0ece2aeb70d..5c908b1cb8ed 100644 --- a/arch/arm/lib/uaccess.S +++ b/arch/arm/lib/uaccess.S @@ -32,11 +32,11 @@ rsb ip, ip, #4 cmp ip, #2 ldrb r3, [r1], #1 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault ldrgeb r3, [r1], #1 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault ldrgtb r3, [r1], #1 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault sub r2, r2, ip b .Lc2u_dest_aligned @@ -59,7 +59,7 @@ ENTRY(__copy_to_user) addmi ip, r2, #4 bmi .Lc2u_0nowords ldr r3, [r1], #4 -USER( T(str) r3, [r0], #4) @ May fault +USER( TUSER( str) r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT @@ -88,18 +88,18 @@ USER( T(str) r3, [r0], #4) @ May fault stmneia r0!, {r3 - r4} @ Shouldnt fault tst ip, #4 ldrne r3, [r1], #4 - T(strne) r3, [r0], #4 @ Shouldnt fault + TUSER( strne) r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 beq .Lc2u_0fupi .Lc2u_0nowords: teq ip, #0 beq .Lc2u_finished .Lc2u_nowords: cmp ip, #2 ldrb r3, [r1], #1 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault ldrgeb r3, [r1], #1 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault ldrgtb r3, [r1], #1 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault b .Lc2u_finished .Lc2u_not_enough: @@ -120,7 +120,7 @@ USER( T(strgtb) r3, [r0], #1) @ May fault mov r3, r7, pull #8 ldr r7, [r1], #4 orr r3, r3, r7, push #24 -USER( T(str) r3, [r0], #4) @ May fault +USER( TUSER( str) r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT @@ -155,18 +155,18 @@ USER( T(str) r3, [r0], #4) @ May fault movne r3, r7, pull #8 ldrne r7, [r1], #4 orrne r3, r3, r7, push #24 - T(strne) r3, [r0], #4 @ Shouldnt fault + TUSER( strne) r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 beq .Lc2u_1fupi .Lc2u_1nowords: mov r3, r7, get_byte_1 teq ip, #0 beq .Lc2u_finished cmp ip, #2 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault movge r3, r7, get_byte_2 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault movgt r3, r7, get_byte_3 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault b .Lc2u_finished .Lc2u_2fupi: subs r2, r2, #4 @@ -175,7 +175,7 @@ USER( T(strgtb) r3, [r0], #1) @ May fault mov r3, r7, pull #16 ldr r7, [r1], #4 orr r3, r3, r7, push #16 -USER( T(str) r3, [r0], #4) @ May fault +USER( TUSER( str) r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT @@ -210,18 +210,18 @@ USER( T(str) r3, [r0], #4) @ May fault movne r3, r7, pull #16 ldrne r7, [r1], #4 orrne r3, r3, r7, push #16 - T(strne) r3, [r0], #4 @ Shouldnt fault + TUSER( strne) r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 beq .Lc2u_2fupi .Lc2u_2nowords: mov r3, r7, get_byte_2 teq ip, #0 beq .Lc2u_finished cmp ip, #2 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault movge r3, r7, get_byte_3 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault ldrgtb r3, [r1], #0 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault b .Lc2u_finished .Lc2u_3fupi: subs r2, r2, #4 @@ -230,7 +230,7 @@ USER( T(strgtb) r3, [r0], #1) @ May fault mov r3, r7, pull #24 ldr r7, [r1], #4 orr r3, r3, r7, push #8 -USER( T(str) r3, [r0], #4) @ May fault +USER( TUSER( str) r3, [r0], #4) @ May fault mov ip, r0, lsl #32 - PAGE_SHIFT rsb ip, ip, #0 movs ip, ip, lsr #32 - PAGE_SHIFT @@ -265,18 +265,18 @@ USER( T(str) r3, [r0], #4) @ May fault movne r3, r7, pull #24 ldrne r7, [r1], #4 orrne r3, r3, r7, push #8 - T(strne) r3, [r0], #4 @ Shouldnt fault + TUSER( strne) r3, [r0], #4 @ Shouldnt fault ands ip, ip, #3 beq .Lc2u_3fupi .Lc2u_3nowords: mov r3, r7, get_byte_3 teq ip, #0 beq .Lc2u_finished cmp ip, #2 -USER( T(strb) r3, [r0], #1) @ May fault +USER( TUSER( strb) r3, [r0], #1) @ May fault ldrgeb r3, [r1], #1 -USER( T(strgeb) r3, [r0], #1) @ May fault +USER( TUSER( strgeb) r3, [r0], #1) @ May fault ldrgtb r3, [r1], #0 -USER( T(strgtb) r3, [r0], #1) @ May fault +USER( TUSER( strgtb) r3, [r0], #1) @ May fault b .Lc2u_finished ENDPROC(__copy_to_user) @@ -295,11 +295,11 @@ ENDPROC(__copy_to_user) .Lcfu_dest_not_aligned: rsb ip, ip, #4 cmp ip, #2 -USER( T(ldrb) r3, [r1], #1) @ May fault +USER( TUSER( ldrb) r3, [r1], #1) @ May fault strb r3, [r0], #1 -USER( T(ldrgeb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault strgeb r3, [r0], #1 -USER( T(ldrgtb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault strgtb r3, [r0], #1 sub r2, r2, ip b .Lcfu_dest_aligned @@ -322,7 +322,7 @@ ENTRY(__copy_from_user) .Lcfu_0fupi: subs r2, r2, #4 addmi ip, r2, #4 bmi .Lcfu_0nowords -USER( T(ldr) r3, [r1], #4) +USER( TUSER( ldr) r3, [r1], #4) str r3, [r0], #4 mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction rsb ip, ip, #0 @@ -351,18 +351,18 @@ USER( T(ldr) r3, [r1], #4) ldmneia r1!, {r3 - r4} @ Shouldnt fault stmneia r0!, {r3 - r4} tst ip, #4 - T(ldrne) r3, [r1], #4 @ Shouldnt fault + TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault strne r3, [r0], #4 ands ip, ip, #3 beq .Lcfu_0fupi .Lcfu_0nowords: teq ip, #0 beq .Lcfu_finished .Lcfu_nowords: cmp ip, #2 -USER( T(ldrb) r3, [r1], #1) @ May fault +USER( TUSER( ldrb) r3, [r1], #1) @ May fault strb r3, [r0], #1 -USER( T(ldrgeb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault strgeb r3, [r0], #1 -USER( T(ldrgtb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault strgtb r3, [r0], #1 b .Lcfu_finished @@ -375,7 +375,7 @@ USER( T(ldrgtb) r3, [r1], #1) @ May fault .Lcfu_src_not_aligned: bic r1, r1, #3 -USER( T(ldr) r7, [r1], #4) @ May fault +USER( TUSER( ldr) r7, [r1], #4) @ May fault cmp ip, #2 bgt .Lcfu_3fupi beq .Lcfu_2fupi @@ -383,7 +383,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault addmi ip, r2, #4 bmi .Lcfu_1nowords mov r3, r7, pull #8 -USER( T(ldr) r7, [r1], #4) @ May fault +USER( TUSER( ldr) r7, [r1], #4) @ May fault orr r3, r3, r7, push #24 str r3, [r0], #4 mov ip, r1, lsl #32 - PAGE_SHIFT @@ -418,7 +418,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault stmneia r0!, {r3 - r4} tst ip, #4 movne r3, r7, pull #8 -USER( T(ldrne) r7, [r1], #4) @ May fault +USER( TUSER( ldrne) r7, [r1], #4) @ May fault orrne r3, r3, r7, push #24 strne r3, [r0], #4 ands ip, ip, #3 @@ -438,7 +438,7 @@ USER( T(ldrne) r7, [r1], #4) @ May fault addmi ip, r2, #4 bmi .Lcfu_2nowords mov r3, r7, pull #16 -USER( T(ldr) r7, [r1], #4) @ May fault +USER( TUSER( ldr) r7, [r1], #4) @ May fault orr r3, r3, r7, push #16 str r3, [r0], #4 mov ip, r1, lsl #32 - PAGE_SHIFT @@ -474,7 +474,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault stmneia r0!, {r3 - r4} tst ip, #4 movne r3, r7, pull #16 -USER( T(ldrne) r7, [r1], #4) @ May fault +USER( TUSER( ldrne) r7, [r1], #4) @ May fault orrne r3, r3, r7, push #16 strne r3, [r0], #4 ands ip, ip, #3 @@ -486,7 +486,7 @@ USER( T(ldrne) r7, [r1], #4) @ May fault strb r3, [r0], #1 movge r3, r7, get_byte_3 strgeb r3, [r0], #1 -USER( T(ldrgtb) r3, [r1], #0) @ May fault +USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault strgtb r3, [r0], #1 b .Lcfu_finished @@ -494,7 +494,7 @@ USER( T(ldrgtb) r3, [r1], #0) @ May fault addmi ip, r2, #4 bmi .Lcfu_3nowords mov r3, r7, pull #24 -USER( T(ldr) r7, [r1], #4) @ May fault +USER( TUSER( ldr) r7, [r1], #4) @ May fault orr r3, r3, r7, push #8 str r3, [r0], #4 mov ip, r1, lsl #32 - PAGE_SHIFT @@ -529,7 +529,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault stmneia r0!, {r3 - r4} tst ip, #4 movne r3, r7, pull #24 -USER( T(ldrne) r7, [r1], #4) @ May fault +USER( TUSER( ldrne) r7, [r1], #4) @ May fault orrne r3, r3, r7, push #8 strne r3, [r0], #4 ands ip, ip, #3 @@ -539,9 +539,9 @@ USER( T(ldrne) r7, [r1], #4) @ May fault beq .Lcfu_finished cmp ip, #2 strb r3, [r0], #1 -USER( T(ldrgeb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault strgeb r3, [r0], #1 -USER( T(ldrgtb) r3, [r1], #1) @ May fault +USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault strgtb r3, [r0], #1 b .Lcfu_finished ENDPROC(__copy_from_user) -- GitLab From 9fb83526a898f14adbd3f6f52fa7126f528f15ac Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 25 Jan 2012 15:19:20 +0000 Subject: [PATCH 0226/1359] ASoC: wm5100: Make sure we switch to button reporting mode When we have identified an accessory make sure we've flagged that we've done so in order to make sure we always report buttons and don't continue to polarity flip. Signed-off-by: Mark Brown --- sound/soc/codecs/wm5100.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c index 66f0611e68b6..3f8fd3ca9454 100644 --- a/sound/soc/codecs/wm5100.c +++ b/sound/soc/codecs/wm5100.c @@ -2183,6 +2183,7 @@ static void wm5100_micd_irq(struct snd_soc_codec *codec) if (wm5100->jack_detecting) { dev_dbg(codec->dev, "Microphone detected\n"); wm5100->jack_mic = true; + wm5100->jack_detecting = false; snd_soc_jack_report(wm5100->jack, SND_JACK_HEADSET, SND_JACK_HEADSET | SND_JACK_BTN_0); @@ -2221,6 +2222,7 @@ static void wm5100_micd_irq(struct snd_soc_codec *codec) SND_JACK_BTN_0); } else if (wm5100->jack_detecting) { dev_dbg(codec->dev, "Headphone detected\n"); + wm5100->jack_detecting = false; snd_soc_jack_report(wm5100->jack, SND_JACK_HEADPHONE, SND_JACK_HEADPHONE); -- GitLab From 93b525dccf212e50a895792d79d64bdb53312f5c Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Wed, 25 Jan 2012 13:52:43 +0100 Subject: [PATCH 0227/1359] drm/i915: fixup forcewake spinlock fallout in drpc debugfs function My forcewake spinlock patches have a functional conflict with Ben Widawsky's gen6 drpc support for debugfs. Result was a benign warning about trying to read an non-atomic variabla with atomic_read. Note that the entire check is racy anyway and purely informational. Also update it to reflect the forcewake voodoo changes, the kernel can now also hold onto a forcewake reference for longer times. Signed-Off-by: Daniel Vetter Reviewed-by: Ben Widawsky Signed-off-by: Keith Packard --- drivers/gpu/drm/i915/i915_debugfs.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c index 99f140798808..deaa657292b4 100644 --- a/drivers/gpu/drm/i915/i915_debugfs.c +++ b/drivers/gpu/drm/i915/i915_debugfs.c @@ -1075,6 +1075,7 @@ static int gen6_drpc_info(struct seq_file *m) struct drm_device *dev = node->minor->dev; struct drm_i915_private *dev_priv = dev->dev_private; u32 rpmodectl1, gt_core_status, rcctl1; + unsigned forcewake_count; int count=0, ret; @@ -1082,9 +1083,13 @@ static int gen6_drpc_info(struct seq_file *m) if (ret) return ret; - if (atomic_read(&dev_priv->forcewake_count)) { - seq_printf(m, "RC information inaccurate because userspace " - "holds a reference \n"); + spin_lock_irq(&dev_priv->gt_lock); + forcewake_count = dev_priv->forcewake_count; + spin_unlock_irq(&dev_priv->gt_lock); + + if (forcewake_count) { + seq_printf(m, "RC information inaccurate because somebody " + "holds a forcewake reference \n"); } else { /* NB: we cannot use forcewake, else we read the wrong values */ while (count++ < 50 && (I915_READ_NOTRACE(FORCEWAKE_ACK) & 1)) -- GitLab From a188fcba73837f83a78dc90a44998a978f50ac83 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 25 Jan 2012 17:57:16 +0000 Subject: [PATCH 0228/1359] ASoC: wm5100: Fix microphone configuration We need to write the configuration for each microphone to a different register. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm5100.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c index 3f8fd3ca9454..fb757af19363 100644 --- a/sound/soc/codecs/wm5100.c +++ b/sound/soc/codecs/wm5100.c @@ -2612,6 +2612,13 @@ static const struct regmap_config wm5100_regmap = { .cache_type = REGCACHE_RBTREE, }; +static const unsigned int wm5100_mic_ctrl_reg[] = { + WM5100_IN1L_CONTROL, + WM5100_IN2L_CONTROL, + WM5100_IN3L_CONTROL, + WM5100_IN4L_CONTROL, +}; + static __devinit int wm5100_i2c_probe(struct i2c_client *i2c, const struct i2c_device_id *id) { @@ -2744,7 +2751,7 @@ static __devinit int wm5100_i2c_probe(struct i2c_client *i2c, } for (i = 0; i < ARRAY_SIZE(wm5100->pdata.in_mode); i++) { - regmap_update_bits(wm5100->regmap, WM5100_IN1L_CONTROL, + regmap_update_bits(wm5100->regmap, wm5100_mic_ctrl_reg[i], WM5100_IN1_MODE_MASK | WM5100_IN1_DMIC_SUP_MASK, (wm5100->pdata.in_mode[i] << -- GitLab From 1ac6d46e43a52a901dadde2a341204e9a1c9e147 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 23 Jan 2012 14:15:28 +0200 Subject: [PATCH 0229/1359] ARM: OMAP2+: hwmod data: split omap2/3 dispc hwmod class Currently OMAP2 and 3 share the same omap_hwmod_class and omap_hwmod_class_sysconfig for dispc. However, OMAP3 has sysconfig bits that OMAP2 doesn't have, so we need to split those structs into OMAP2 and OMAP3 specific versions. This patch only splits the structs, without changing the contents. This is a prerequisite for a subsequent fix. Signed-off-by: Tomi Valkeinen [paul@pwsan.com: added commit note] Signed-off-by: Paul Walmsley --- .../omap_hwmod_2xxx_3xxx_ipblock_data.c | 21 ----------------- .../mach-omap2/omap_hwmod_2xxx_ipblock_data.c | 22 ++++++++++++++++++ arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 23 ++++++++++++++++++- 3 files changed, 44 insertions(+), 22 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c index c11273da5dcc..f08e442af397 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_3xxx_ipblock_data.c @@ -55,27 +55,6 @@ struct omap_hwmod_class omap2_dss_hwmod_class = { .reset = omap_dss_reset, }; -/* - * 'dispc' class - * display controller - */ - -static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { - .rev_offs = 0x0000, - .sysc_offs = 0x0010, - .syss_offs = 0x0014, - .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), - .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | - MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), - .sysc_fields = &omap_hwmod_sysc_type1, -}; - -struct omap_hwmod_class omap2_dispc_hwmod_class = { - .name = "dispc", - .sysc = &omap2_dispc_sysc, -}; - /* * 'rfbi' class * remote frame buffer interface diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 177dee20faef..2a6729741b06 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -28,6 +28,28 @@ struct omap_hwmod_dma_info omap2xxx_dss_sdma_chs[] = { { .name = "dispc", .dma_req = 5 }, { .dma_req = -1 } }; + +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap2_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +struct omap_hwmod_class omap2_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap2_dispc_sysc, +}; + /* OMAP2xxx Timer Common */ static struct omap_hwmod_class_sysconfig omap2xxx_timer_sysc = { .rev_offs = 0x0000, diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 5324e8d93bc0..c9653099c87e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1480,6 +1480,27 @@ static struct omap_hwmod omap3xxx_dss_core_hwmod = { .masters_cnt = ARRAY_SIZE(omap3xxx_dss_masters), }; +/* + * 'dispc' class + * display controller + */ + +static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = { + .rev_offs = 0x0000, + .sysc_offs = 0x0010, + .syss_offs = 0x0014, + .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | + MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), + .sysc_fields = &omap_hwmod_sysc_type1, +}; + +static struct omap_hwmod_class omap3_dispc_hwmod_class = { + .name = "dispc", + .sysc = &omap3_dispc_sysc, +}; + /* l4_core -> dss_dispc */ static struct omap_hwmod_ocp_if omap3xxx_l4_core__dss_dispc = { .master = &omap3xxx_l4_core_hwmod, @@ -1503,7 +1524,7 @@ static struct omap_hwmod_ocp_if *omap3xxx_dss_dispc_slaves[] = { static struct omap_hwmod omap3xxx_dss_dispc_hwmod = { .name = "dss_dispc", - .class = &omap2_dispc_hwmod_class, + .class = &omap3_dispc_hwmod_class, .mpu_irqs = omap2_dispc_irqs, .main_clk = "dss1_alwon_fck", .prcm = { -- GitLab From b0a85faf0bf11862a2a466daa1b7dc1d45527e64 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 23 Jan 2012 14:15:29 +0200 Subject: [PATCH 0230/1359] ARM: OMAP3: hwmod data: add SYSC_HAS_ENAWAKEUP for dispc dispc's sysc_flags is missing SYSC_HAS_ENAWAKEUP flag. This seems to cause SYNC_LOST errors from the DSS when the power management is enabled. This patch adds the missing SYSC_HAS_ENAWAKEUP flag. Note that there are other flags missing also (clock activity, DSI's sysc flags), but as they are not critical, they will be fixed in the next merge window. Signed-off-by: Tomi Valkeinen Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index c9653099c87e..b176d44e6c94 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -1490,7 +1490,8 @@ static struct omap_hwmod_class_sysconfig omap3_dispc_sysc = { .sysc_offs = 0x0010, .syss_offs = 0x0014, .sysc_flags = (SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE | - SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE), + SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE | + SYSC_HAS_ENAWAKEUP), .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_NO | MSTANDBY_SMART), .sysc_fields = &omap_hwmod_sysc_type1, -- GitLab From 6af486e2b3d45efca7c680aa7ce3bacebe22d7aa Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Mon, 28 Nov 2011 15:45:39 +0200 Subject: [PATCH 0231/1359] ARM: OMAP4: hwmod data: Add names for DMIC memory address space To be able to get the memory resources by name from the DMIC driver (for MPU and for DMA). Without this patch, functionality that was working in 3.2 breaks in 3.3-rc1. This patch should have gone in as part of the 3.3 merge window, but was inadvertently missed. Signed-off-by: Peter Ujfalusi [paul@pwsan.com: added commit message note] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index f9f151081760..ef0524c10a84 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -1031,6 +1031,7 @@ static struct omap_hwmod_dma_info omap44xx_dmic_sdma_reqs[] = { static struct omap_hwmod_addr_space omap44xx_dmic_addrs[] = { { + .name = "mpu", .pa_start = 0x4012e000, .pa_end = 0x4012e07f, .flags = ADDR_TYPE_RT @@ -1049,6 +1050,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_abe__dmic = { static struct omap_hwmod_addr_space omap44xx_dmic_dma_addrs[] = { { + .name = "dma", .pa_start = 0x4902e000, .pa_end = 0x4902e07f, .flags = ADDR_TYPE_RT -- GitLab From 161107981df333955218bb0894f53b05b31da2ff Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 25 Jan 2012 12:57:46 -0700 Subject: [PATCH 0232/1359] ARM: OMAP2+: io: fix compilation breakage on 2420-only configs Commit 7b250aff1ce346b6c7bc0329a2350334d1c66525 ("ARM: OMAP: Avoid cpu_is_omapxxxx usage until map_io is done") breaks the build on a 2420-only config on v3.3-rc1: arch/arm/mach-omap2/built-in.o: In function `omap2430_init_early': arch/arm/mach-omap2/io.c:406: undefined reference to `omap2_set_globals_243x' arch/arm/mach-omap2/io.c:410: undefined reference to `omap243x_clockdomains_init' arch/arm/mach-omap2/io.c:411: undefined reference to `omap2430_hwmod_init' Fix by only compiling omap2420_init_early() when CONFIG_SOC_OMAP2420 is selected, and only compiling omap2430_init_early() when CONFIG_SOC_OMAP2430 is selected. Signed-off-by: Paul Walmsley Cc: Tony Lindgren --- arch/arm/mach-omap2/io.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index 3f174d51f67f..eb50c29fb644 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -388,7 +388,7 @@ static void __init omap_hwmod_init_postsetup(void) omap_pm_if_early_init(); } -#ifdef CONFIG_ARCH_OMAP2 +#ifdef CONFIG_SOC_OMAP2420 void __init omap2420_init_early(void) { omap2_set_globals_242x(); @@ -400,7 +400,9 @@ void __init omap2420_init_early(void) omap_hwmod_init_postsetup(); omap2420_clk_init(); } +#endif +#ifdef CONFIG_SOC_OMAP2430 void __init omap2430_init_early(void) { omap2_set_globals_243x(); -- GitLab From d19e8f2e44a34b2a461f67ce9d0cb5bd43197c1e Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Wed, 25 Jan 2012 12:57:49 -0700 Subject: [PATCH 0233/1359] ARM: OMAP2/3: PRM: fix missing plat/irqs.h build breakage Commit 22f51371f8c35869ed850f46aa76b6cc2b502110 ("ARM: OMAP3: pm: use prcm chain handler") breaks the build on a 2420-only config, due to a missing include for plat/irqs.h: CC arch/arm/mach-omap2/prm2xxx_3xxx.o arch/arm/mach-omap2/prm2xxx_3xxx.c:41:11: error: 'INT_34XX_PRCM_MPU_IRQ' undeclared here (not in a function) Fix by explicitly including it. Signed-off-by: Paul Walmsley Cc: Tero Kristo Cc: Kevin Hilman --- arch/arm/mach-omap2/prm2xxx_3xxx.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/prm2xxx_3xxx.c b/arch/arm/mach-omap2/prm2xxx_3xxx.c index c1c4d86a79a8..9ce765407ad5 100644 --- a/arch/arm/mach-omap2/prm2xxx_3xxx.c +++ b/arch/arm/mach-omap2/prm2xxx_3xxx.c @@ -19,6 +19,7 @@ #include "common.h" #include #include +#include #include "vp.h" -- GitLab From cf840551a884360841bd3d3ce1ad0868ff0b759a Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Wed, 18 Jan 2012 17:47:12 +0800 Subject: [PATCH 0234/1359] xHCI: Cleanup isoc transfer ring when TD length mismatch found When a TD length mismatch is found during isoc TRB enqueue, it directly returns -EINVAL. However, isoc transfer is partially enqueued at this time, and the ring should be cleared. This should be backported to kernels as old as 2.6.36, which contain the commit 522989a27c7badb608155b1f1dea3487ed431f74 "xhci: Fix failed enqueue in the middle of isoch TD." Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org --- drivers/usb/host/xhci-ring.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 5a818cbbab44..b62037bff688 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -3324,7 +3324,8 @@ static int xhci_queue_isoc_tx(struct xhci_hcd *xhci, gfp_t mem_flags, /* Check TD length */ if (running_total != td_len) { xhci_err(xhci, "ISOC TD length unmatch\n"); - return -EINVAL; + ret = -EINVAL; + goto cleanup; } } -- GitLab From 1d2f56c84f100890476e62d83062cfe9965fc7b4 Mon Sep 17 00:00:00 2001 From: Ilya Yanok Date: Wed, 28 Dec 2011 00:31:33 +0100 Subject: [PATCH 0235/1359] ARM: OMAP3: hwmod data: register dss hwmods after dss_core dss_core has to be initialized before any other DSS hwmod. Currently this is broken as dss_core is listed in chip/revision specific hwmod lists while other DSS hwmods are listed in common list which is registered first. This patch moves DSS hwmods (except for dss_core) to the separate list which is registered last to ensure that dss_core is already registered. This solves the problem with BUG() in L3 interrupt handler on boards with DSS enabled in bootloader. The long-term fix to this is to ensure modules are set up in dependency order in the hwmod core code. CC: Tomi Valkeinen CC: Archit Taneja CC: Paul Walmsley Signed-off-by: Ilya Yanok [paul@pwsan.com: add notes that this is just a temporary workaround until hwmod dependencies are added] Signed-off-by: Paul Walmsley --- arch/arm/mach-omap2/omap_hwmod_3xxx_data.c | 30 +++++++++++++++++----- 1 file changed, 24 insertions(+), 6 deletions(-) diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index b176d44e6c94..3c8dd928628e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3545,12 +3545,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_uart2_hwmod, &omap3xxx_uart3_hwmod, - /* dss class */ - &omap3xxx_dss_dispc_hwmod, - &omap3xxx_dss_dsi1_hwmod, - &omap3xxx_dss_rfbi_hwmod, - &omap3xxx_dss_venc_hwmod, - /* i2c class */ &omap3xxx_i2c1_hwmod, &omap3xxx_i2c2_hwmod, @@ -3657,6 +3651,15 @@ static __initdata struct omap_hwmod *am35xx_hwmods[] = { NULL }; +static __initdata struct omap_hwmod *omap3xxx_dss_hwmods[] = { + /* dss class */ + &omap3xxx_dss_dispc_hwmod, + &omap3xxx_dss_dsi1_hwmod, + &omap3xxx_dss_rfbi_hwmod, + &omap3xxx_dss_venc_hwmod, + NULL +}; + int __init omap3xxx_hwmod_init(void) { int r; @@ -3730,6 +3733,21 @@ int __init omap3xxx_hwmod_init(void) if (h) r = omap_hwmod_register(h); + if (r < 0) + return r; + + /* + * DSS code presumes that dss_core hwmod is handled first, + * _before_ any other DSS related hwmods so register common + * DSS hwmods last to ensure that dss_core is already registered. + * Otherwise some change things may happen, for ex. if dispc + * is handled before dss_core and DSS is enabled in bootloader + * DIPSC will be reset with outputs enabled which sometimes leads + * to unrecoverable L3 error. + * XXX The long-term fix to this is to ensure modules are set up + * in dependency order in the hwmod core code. + */ + r = omap_hwmod_register(omap3xxx_dss_hwmods); return r; } -- GitLab From 1b76d2ee4012f325ae14e0e71dad1a0835195906 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 25 Jan 2012 21:10:07 +0000 Subject: [PATCH 0236/1359] ASoC: wm8996: Mark register cache as dirty when regulators are disabled Otherwise we won't resync later. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8996.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8996.c b/sound/soc/codecs/wm8996.c index 13aa2bdaa7d7..61f7daa4d0e6 100644 --- a/sound/soc/codecs/wm8996.c +++ b/sound/soc/codecs/wm8996.c @@ -108,7 +108,7 @@ static int wm8996_regulator_event_##n(struct notifier_block *nb, \ struct wm8996_priv *wm8996 = container_of(nb, struct wm8996_priv, \ disable_nb[n]); \ if (event & REGULATOR_EVENT_DISABLE) { \ - regcache_cache_only(wm8996->regmap, true); \ + regcache_mark_dirty(wm8996->regmap); \ } \ return 0; \ } -- GitLab From 5539a102882d5ddd1bb95ea9f6f43130a789cb7f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 25 Jan 2012 21:10:21 +0000 Subject: [PATCH 0237/1359] ASoC: wm8962: Mark register cache as dirty when regulators are disabled Otherwise we won't resync later. Signed-off-by: Mark Brown --- sound/soc/codecs/wm8962.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 296de4e30d26..bda3da887d7e 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -96,7 +96,7 @@ static int wm8962_regulator_event_##n(struct notifier_block *nb, \ struct wm8962_priv *wm8962 = container_of(nb, struct wm8962_priv, \ disable_nb[n]); \ if (event & REGULATOR_EVENT_DISABLE) { \ - regcache_cache_only(wm8962->regmap, true); \ + regcache_mark_dirty(wm8962->regmap); \ } \ return 0; \ } -- GitLab From 5c1b136b7bf702e550039cb0039ec9c790c48f99 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 25 Jan 2012 21:10:33 +0000 Subject: [PATCH 0238/1359] ASoC: wm5100: Mark register cache as dirty when regulators are disabled Otherwise we won't resync later. Signed-off-by: Mark Brown --- sound/soc/codecs/wm5100.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/soc/codecs/wm5100.c b/sound/soc/codecs/wm5100.c index fb757af19363..89f2af77b1c3 100644 --- a/sound/soc/codecs/wm5100.c +++ b/sound/soc/codecs/wm5100.c @@ -1405,6 +1405,7 @@ static int wm5100_set_bias_level(struct snd_soc_codec *codec, case SND_SOC_BIAS_OFF: regcache_cache_only(wm5100->regmap, true); + regcache_mark_dirty(wm5100->regmap); if (wm5100->pdata.ldo_ena) gpio_set_value_cansleep(wm5100->pdata.ldo_ena, 0); regulator_bulk_disable(ARRAY_SIZE(wm5100->core_supplies), -- GitLab From 68315801dbf3ab2001679fd2074c9dc5dcf87dfa Mon Sep 17 00:00:00 2001 From: James Chapman Date: Wed, 25 Jan 2012 02:39:05 +0000 Subject: [PATCH 0239/1359] l2tp: l2tp_ip - fix possible oops on packet receive When a packet is received on an L2TP IP socket (L2TPv3 IP link encapsulation), the l2tpip socket's backlog_rcv function calls xfrm4_policy_check(). This is not necessary, since it was called before the skb was added to the backlog. With CONFIG_NET_NS enabled, xfrm4_policy_check() will oops if skb->dev is null, so this trivial patch removes the call. This bug has always been present, but only when CONFIG_NET_NS is enabled does it cause problems. Most users are probably using UDP encapsulation for L2TP, hence the problem has only recently surfaced. EIP: 0060:[] EFLAGS: 00210246 CPU: 0 EIP is at l2tp_ip_recvmsg+0xd4/0x2a7 EAX: 00000001 EBX: d77b5180 ECX: 00000000 EDX: 00200246 ESI: 00000000 EDI: d63cbd30 EBP: d63cbd18 ESP: d63cbcf4 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 Call Trace: [] sock_common_recvmsg+0x31/0x46 [] __sock_recvmsg_nosec+0x45/0x4d [] __sock_recvmsg+0x31/0x3b [] sock_recvmsg+0x96/0xab [] ? might_fault+0x47/0x81 [] ? might_fault+0x47/0x81 [] ? _copy_from_user+0x31/0x115 [] ? copy_from_user+0x8/0xa [] ? verify_iovec+0x3e/0x78 [] __sys_recvmsg+0x10a/0x1aa [] ? sock_recvmsg+0x0/0xab [] ? __lock_acquire+0xbdf/0xbee [] ? do_page_fault+0x193/0x375 [] ? fcheck_files+0x9b/0xca [] ? fget_light+0x2a/0x9c [] sys_recvmsg+0x2b/0x43 [] sys_socketcall+0x16d/0x1a5 [] ? trace_hardirqs_on_thunk+0xc/0x10 [] sysenter_do_call+0x12/0x38 Code: c6 05 8c ea a8 c1 01 e8 0c d4 d9 ff 85 f6 74 07 3e ff 86 80 00 00 00 b9 17 b6 2b c1 ba 01 00 00 00 b8 78 ed 48 c1 e8 23 f6 d9 ff 76 0c 68 28 e3 30 c1 68 2d 44 41 c1 e8 89 57 01 00 83 c4 0c Signed-off-by: James Chapman Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/l2tp/l2tp_ip.c | 5 ----- 1 file changed, 5 deletions(-) diff --git a/net/l2tp/l2tp_ip.c b/net/l2tp/l2tp_ip.c index d21e7ebd91ca..55670ec3cd0f 100644 --- a/net/l2tp/l2tp_ip.c +++ b/net/l2tp/l2tp_ip.c @@ -393,11 +393,6 @@ static int l2tp_ip_backlog_recv(struct sock *sk, struct sk_buff *skb) { int rc; - if (!xfrm4_policy_check(sk, XFRM_POLICY_IN, skb)) - goto drop; - - nf_reset(skb); - /* Charge it to the socket, dropping if the queue is full. */ rc = sock_queue_rcv_skb(sk, skb); if (rc < 0) -- GitLab From 2b05ad33e1e624e7f08b8676d270dc7725403b7e Mon Sep 17 00:00:00 2001 From: Flavio Leitner Date: Wed, 25 Jan 2012 08:34:51 +0000 Subject: [PATCH 0240/1359] tcp: bind() fix autoselection to share ports The current code checks for conflicts when the application requests a specific port. If there is no conflict, then the request is granted. On the other hand, the port autoselection done by the kernel fails when all ports are bound even when there is a port with no conflict available. The fix changes port autoselection to check if there is a conflict and use it if not. Signed-off-by: Flavio Leitner Signed-off-by: Marcelo Ricardo Leitner Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/inet_connection_sock.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index 2e4e24476c4c..ecd19b5a7ee2 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -128,6 +128,11 @@ again: goto have_snum; } } + if (!inet_csk(sk)->icsk_af_ops->bind_conflict(sk, tb)) { + spin_unlock(&head->lock); + snum = rover; + goto have_snum; + } goto next; } break; -- GitLab From fddb7b5761f104f034a0e708ece756d9b2eb2cac Mon Sep 17 00:00:00 2001 From: Flavio Leitner Date: Wed, 25 Jan 2012 08:34:52 +0000 Subject: [PATCH 0241/1359] tcp: bind() optimize port allocation Port autoselection finds a port and then drop the lock, then right after that, gets the hash bucket again and lock it. Fix it to go direct. Signed-off-by: Flavio Leitner Signed-off-by: Marcelo Ricardo Leitner Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/inet_connection_sock.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index ecd19b5a7ee2..19d66cefd7d3 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -123,15 +123,13 @@ again: smallest_size = tb->num_owners; smallest_rover = rover; if (atomic_read(&hashinfo->bsockets) > (high - low) + 1) { - spin_unlock(&head->lock); snum = smallest_rover; - goto have_snum; + goto tb_found; } } if (!inet_csk(sk)->icsk_af_ops->bind_conflict(sk, tb)) { - spin_unlock(&head->lock); snum = rover; - goto have_snum; + goto tb_found; } goto next; } -- GitLab From 58d7d18b5268febb8b1391c6dffc8e2aaa751fcd Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 26 Jan 2012 15:03:16 +1100 Subject: [PATCH 0242/1359] crypto: sha512 - Use binary and instead of modulus The previous patch used the modulus operator over a power of 2 unnecessarily which may produce suboptimal binary code. This patch changes changes them to binary ands instead. Signed-off-by: Herbert Xu --- crypto/sha512_generic.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/crypto/sha512_generic.c b/crypto/sha512_generic.c index 88f160b77b1f..3edebfd4dbec 100644 --- a/crypto/sha512_generic.c +++ b/crypto/sha512_generic.c @@ -78,7 +78,7 @@ static inline void LOAD_OP(int I, u64 *W, const u8 *input) static inline void BLEND_OP(int I, u64 *W) { - W[I % 16] += s1(W[(I-2) % 16]) + W[(I-7) % 16] + s0(W[(I-15) % 16]); + W[I & 15] += s1(W[(I-2) & 15]) + W[(I-7) & 15] + s0(W[(I-15) & 15]); } static void @@ -105,7 +105,7 @@ sha512_transform(u64 *state, const u8 *input) #define SHA512_16_79(i, a, b, c, d, e, f, g, h) \ BLEND_OP(i, W); \ - t1 = h + e1(e) + Ch(e, f, g) + sha512_K[i] + W[(i)%16]; \ + t1 = h + e1(e) + Ch(e, f, g) + sha512_K[i] + W[(i)&15]; \ t2 = e0(a) + Maj(a, b, c); \ d += t1; \ h = t1 + t2 -- GitLab From 5a51467b146ab7948d2f6812892eac120a30529c Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Wed, 18 Jan 2012 20:07:54 -0600 Subject: [PATCH 0243/1359] x86/uv: Fix uv_gpa_to_soc_phys_ram() shift uv_gpa_to_soc_phys_ram() was inadvertently ignoring the shift values. This fix takes the shift into account. Signed-off-by: Russ Anderson Cc: Link: http://lkml.kernel.org/r/20120119020753.GA7228@sgi.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/uv/uv_hub.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/x86/include/asm/uv/uv_hub.h b/arch/x86/include/asm/uv/uv_hub.h index 54a13aaebc40..21f7385badb8 100644 --- a/arch/x86/include/asm/uv/uv_hub.h +++ b/arch/x86/include/asm/uv/uv_hub.h @@ -318,13 +318,13 @@ uv_gpa_in_mmr_space(unsigned long gpa) /* UV global physical address --> socket phys RAM */ static inline unsigned long uv_gpa_to_soc_phys_ram(unsigned long gpa) { - unsigned long paddr = gpa & uv_hub_info->gpa_mask; + unsigned long paddr; unsigned long remap_base = uv_hub_info->lowmem_remap_base; unsigned long remap_top = uv_hub_info->lowmem_remap_top; gpa = ((gpa << uv_hub_info->m_shift) >> uv_hub_info->m_shift) | ((gpa >> uv_hub_info->n_lshift) << uv_hub_info->m_val); - gpa = gpa & uv_hub_info->gpa_mask; + paddr = gpa & uv_hub_info->gpa_mask; if (paddr >= remap_base && paddr < remap_base + remap_top) paddr -= remap_base; return paddr; -- GitLab From d2ebc71d472020bc30e29afe8c4d2a85a5b41f56 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Wed, 18 Jan 2012 09:40:47 -0600 Subject: [PATCH 0244/1359] x86/uv: Fix uninitialized spinlocks Initialize two spinlocks in tlb_uv.c and also properly define/initialize the uv_irq_lock. The lack of explicit initialization seems to be functionally harmless, but it is diagnosed when these are turned on: CONFIG_DEBUG_SPINLOCK=y CONFIG_DEBUG_MUTEXES=y CONFIG_DEBUG_LOCK_ALLOC=y CONFIG_LOCKDEP=y Signed-off-by: Cliff Wickman Cc: Cc: Dimitri Sivanich Link: http://lkml.kernel.org/r/E1RnXd1-0003wU-PM@eag09.americas.sgi.com [ Added the uv_irq_lock initialization fix by Dimitri Sivanich ] Signed-off-by: Ingo Molnar --- arch/x86/platform/uv/tlb_uv.c | 2 ++ arch/x86/platform/uv/uv_irq.c | 2 +- 2 files changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/x86/platform/uv/tlb_uv.c b/arch/x86/platform/uv/tlb_uv.c index 9be4cff00a2d..3ae0e61abd23 100644 --- a/arch/x86/platform/uv/tlb_uv.c +++ b/arch/x86/platform/uv/tlb_uv.c @@ -1851,6 +1851,8 @@ static void __init init_per_cpu_tunables(void) bcp->cong_reps = congested_reps; bcp->cong_period = congested_period; bcp->clocks_per_100_usec = usec_2_cycles(100); + spin_lock_init(&bcp->queue_lock); + spin_lock_init(&bcp->uvhub_lock); } } diff --git a/arch/x86/platform/uv/uv_irq.c b/arch/x86/platform/uv/uv_irq.c index 374a05d8ad22..f25c2765a5c9 100644 --- a/arch/x86/platform/uv/uv_irq.c +++ b/arch/x86/platform/uv/uv_irq.c @@ -25,7 +25,7 @@ struct uv_irq_2_mmr_pnode{ int irq; }; -static spinlock_t uv_irq_lock; +static DEFINE_SPINLOCK(uv_irq_lock); static struct rb_root uv_irq_root; static int uv_set_irq_affinity(struct irq_data *, const struct cpumask *, bool); -- GitLab From 3fe54564a61f72982032423d24041dca30617ca2 Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Wed, 25 Jan 2012 14:35:49 +0800 Subject: [PATCH 0245/1359] x86/numachip: Drop unnecessary conflict with EDAC EDAC detection no longer crashes multi-node systems, so don't conflict on it with NumaChip. Signed-off-by: Daniel J Blueman Cc: Steffen Persvold Link: http://lkml.kernel.org/r/1327473349-28395-1-git-send-email-daniel@numascale-asia.com Signed-off-by: Ingo Molnar --- arch/x86/Kconfig | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 864cc6e6ac8e..5bed94e189fa 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -360,7 +360,6 @@ config X86_NUMACHIP depends on NUMA depends on SMP depends on X86_X2APIC - depends on !EDAC_AMD64 ---help--- Adds support for Numascale NumaChip large-SMP systems. Needed to enable more than ~168 cores. -- GitLab From 5067cf53cac9b36d42ebb3a45bb12259d0bc1e68 Mon Sep 17 00:00:00 2001 From: Jesper Juhl Date: Mon, 23 Jan 2012 23:34:59 +0100 Subject: [PATCH 0246/1359] x86/boot-image: Don't leak phdrs in arch/x86/boot/compressed/misc.c::Parse_elf() We allocate memory with malloc(), but neglect to free it before the variable 'phdrs' goes out of scope --> leak. Signed-off-by: Jesper Juhl Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1201232332590.8772@swampdragon.chaosbits.net [ Mostly harmless. ] Signed-off-by: Ingo Molnar --- arch/x86/boot/compressed/misc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c index 3a19d04cebeb..7116dcba0c9e 100644 --- a/arch/x86/boot/compressed/misc.c +++ b/arch/x86/boot/compressed/misc.c @@ -321,6 +321,8 @@ static void parse_elf(void *output) default: /* Ignore other PT_* */ break; } } + + free(phdrs); } asmlinkage void decompress_kernel(void *rmode, memptr heap, -- GitLab From 8a093049c604ab32d94bcc5baa24f7939d5e3f7b Mon Sep 17 00:00:00 2001 From: Karol Lewandowski Date: Wed, 25 Jan 2012 10:31:45 +0100 Subject: [PATCH 0247/1359] regulator: Set apply_uV only when min and max voltages are defined apply_uV is errornously set when regulator is instantiated from device tree, even when it doesn't contain any voltage constraints. This commit fixes error: machine_constraints_voltage: CHARGER: failed to apply 0uV constraint for following regulator description in DTS: CHARGER { regulator-min-microamp = <100000>; regulator-max-microamp = <200000>; } Signed-off-by: Karol Lewandowski Signed-off-by: Kyungmin Park Signed-off-by: Mark Brown --- drivers/regulator/of_regulator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index f1651eb69648..679734d26a16 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -35,7 +35,7 @@ static void of_get_regulation_constraints(struct device_node *np, if (constraints->min_uV != constraints->max_uV) constraints->valid_ops_mask |= REGULATOR_CHANGE_VOLTAGE; /* Only one voltage? Then make sure it's set. */ - if (constraints->min_uV == constraints->max_uV) + if (min_uV && max_uV && constraints->min_uV == constraints->max_uV) constraints->apply_uV = true; uV_offset = of_get_property(np, "regulator-microvolt-offset", NULL); -- GitLab From 652847aa449cfe364d40018849223f57f31a38e2 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 20 Jan 2012 17:38:23 +0100 Subject: [PATCH 0248/1359] x86/amd: Add missing feature flag for fam15h models 10h-1fh processors That is the last one missing for those CPUs. Others were recently added with commits fb215366b3c7320ac25dca766a0152df16534932 (KVM: expose latest Intel cpu new features (BMI1/BMI2/FMA/AVX2) to guest) and commit 969df4b82904a30fef19a67398a0c854d223ea67 (x86: Report cpb and eff_freq_ro flags correctly) Signed-off-by: Andreas Herrmann Link: http://lkml.kernel.org/r/20120120163823.GC24508@alberich.amd.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/cpufeature.h | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 17c5d4bdee5e..8d67d428b0f9 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -159,6 +159,7 @@ #define X86_FEATURE_WDT (6*32+13) /* Watchdog timer */ #define X86_FEATURE_LWP (6*32+15) /* Light Weight Profiling */ #define X86_FEATURE_FMA4 (6*32+16) /* 4 operands MAC instructions */ +#define X86_FEATURE_TCE (6*32+17) /* translation cache extension */ #define X86_FEATURE_NODEID_MSR (6*32+19) /* NodeId MSR */ #define X86_FEATURE_TBM (6*32+21) /* trailing bit manipulations */ #define X86_FEATURE_TOPOEXT (6*32+22) /* topology extensions CPUID leafs */ -- GitLab From 5b68edc91cdc972c46f76f85eded7ffddc3ff5c2 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Fri, 20 Jan 2012 17:44:12 +0100 Subject: [PATCH 0249/1359] x86/microcode_amd: Add support for CPU family specific container files We've decided to provide CPU family specific container files (starting with CPU family 15h). E.g. for family 15h we have to load microcode_amd_fam15h.bin instead of microcode_amd.bin Rationale is that starting with family 15h patch size is larger than 2KB which was hard coded as maximum patch size in various microcode loaders (not just Linux). Container files which include patches larger than 2KB cause different kinds of trouble with such old patch loaders. Thus we have to ensure that the default container file provides only patches with size less than 2KB. Signed-off-by: Andreas Herrmann Cc: Borislav Petkov Cc: Link: http://lkml.kernel.org/r/20120120164412.GD24508@alberich.amd.com [ documented the naming convention and tidied the code a bit. ] Signed-off-by: Ingo Molnar --- arch/x86/kernel/microcode_amd.c | 24 ++++++++++++++++++++++-- 1 file changed, 22 insertions(+), 2 deletions(-) diff --git a/arch/x86/kernel/microcode_amd.c b/arch/x86/kernel/microcode_amd.c index fe86493f3ed1..ac0417be9131 100644 --- a/arch/x86/kernel/microcode_amd.c +++ b/arch/x86/kernel/microcode_amd.c @@ -311,13 +311,33 @@ out: return state; } +/* + * AMD microcode firmware naming convention, up to family 15h they are in + * the legacy file: + * + * amd-ucode/microcode_amd.bin + * + * This legacy file is always smaller than 2K in size. + * + * Starting at family 15h they are in family specific firmware files: + * + * amd-ucode/microcode_amd_fam15h.bin + * amd-ucode/microcode_amd_fam16h.bin + * ... + * + * These might be larger than 2K. + */ static enum ucode_state request_microcode_amd(int cpu, struct device *device) { - const char *fw_name = "amd-ucode/microcode_amd.bin"; + char fw_name[36] = "amd-ucode/microcode_amd.bin"; const struct firmware *fw; enum ucode_state ret = UCODE_NFOUND; + struct cpuinfo_x86 *c = &cpu_data(cpu); + + if (c->x86 >= 0x15) + snprintf(fw_name, sizeof(fw_name), "amd-ucode/microcode_amd_fam%.2xh.bin", c->x86); - if (request_firmware(&fw, fw_name, device)) { + if (request_firmware(&fw, (const char *)fw_name, device)) { pr_err("failed to load file %s\n", fw_name); goto out; } -- GitLab From 0eaf9f52e94f756147dbfe1faf1f77a02378dbf9 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 23 Jan 2012 13:23:08 +0200 Subject: [PATCH 0250/1359] OMAPDSS: use sync versions of pm_runtime_put omapdss doesn't work properly on system suspend. The problem seems to be the fact that omapdss uses pm_runtime_put() functions when turning off the hardware, and when system suspend is in process only sync versions are allowed. Using non-sync versions normally and sync versions when suspending would need rather ugly hacks to convey the information of suspending/not-suspending to different functions. Optimally the driver wouldn't even need to care about this, and the PM layer would handle syncing when suspend is in process. This patch changes all omapdss's pm_runtime_put calls to pm_runtime_put_sync. This fixes the suspend problem, and probably the performance penalty of always using sync versions is negligible. Signed-off-by: Tomi Valkeinen Acked-by: Kevin Hilman --- drivers/video/omap2/dss/dispc.c | 2 +- drivers/video/omap2/dss/dsi.c | 2 +- drivers/video/omap2/dss/dss.c | 2 +- drivers/video/omap2/dss/hdmi.c | 2 +- drivers/video/omap2/dss/rfbi.c | 2 +- drivers/video/omap2/dss/venc.c | 2 +- 6 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/video/omap2/dss/dispc.c b/drivers/video/omap2/dss/dispc.c index a5ec7f37c185..e1626a1d5c45 100644 --- a/drivers/video/omap2/dss/dispc.c +++ b/drivers/video/omap2/dss/dispc.c @@ -401,7 +401,7 @@ void dispc_runtime_put(void) DSSDBG("dispc_runtime_put\n"); - r = pm_runtime_put(&dispc.pdev->dev); + r = pm_runtime_put_sync(&dispc.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 511ae2a7add8..04a89a7bbaf5 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -1079,7 +1079,7 @@ void dsi_runtime_put(struct platform_device *dsidev) DSSDBG("dsi_runtime_put\n"); - r = pm_runtime_put(&dsi->pdev->dev); + r = pm_runtime_put_sync(&dsi->pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/dss.c b/drivers/video/omap2/dss/dss.c index 17033457ee89..77c2b5a32b5d 100644 --- a/drivers/video/omap2/dss/dss.c +++ b/drivers/video/omap2/dss/dss.c @@ -720,7 +720,7 @@ void dss_runtime_put(void) DSSDBG("dss_runtime_put\n"); - r = pm_runtime_put(&dss.pdev->dev); + r = pm_runtime_put_sync(&dss.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index b4c270edb915..c39f9c3a92cf 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -176,7 +176,7 @@ static void hdmi_runtime_put(void) DSSDBG("hdmi_runtime_put\n"); - r = pm_runtime_put(&hdmi.pdev->dev); + r = pm_runtime_put_sync(&hdmi.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/rfbi.c b/drivers/video/omap2/dss/rfbi.c index 814bb9500dca..55f398014f33 100644 --- a/drivers/video/omap2/dss/rfbi.c +++ b/drivers/video/omap2/dss/rfbi.c @@ -140,7 +140,7 @@ static void rfbi_runtime_put(void) DSSDBG("rfbi_runtime_put\n"); - r = pm_runtime_put(&rfbi.pdev->dev); + r = pm_runtime_put_sync(&rfbi.pdev->dev); WARN_ON(r < 0); } diff --git a/drivers/video/omap2/dss/venc.c b/drivers/video/omap2/dss/venc.c index b3e9f9091581..5c3d0f901510 100644 --- a/drivers/video/omap2/dss/venc.c +++ b/drivers/video/omap2/dss/venc.c @@ -401,7 +401,7 @@ static void venc_runtime_put(void) DSSDBG("venc_runtime_put\n"); - r = pm_runtime_put(&venc.pdev->dev); + r = pm_runtime_put_sync(&venc.pdev->dev); WARN_ON(r < 0); } -- GitLab From 575753e3bea3b67eef8e454fb87f719e3f7da599 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:04:53 +0200 Subject: [PATCH 0251/1359] OMAP: 4430SDP/Panda: use gpio_free_array to free HDMI gpios Instead of freeing the GPIOs individually, use gpio_free_array(). Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 3 +-- arch/arm/mach-omap2/board-omap4panda.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index e1fe304ce361..7bbe23ee3e35 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -614,8 +614,7 @@ static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) static void sdp4430_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(sdp4430_hdmi_gpios, ARRAY_SIZE(sdp4430_hdmi_gpios)); } static struct nokia_dsi_panel_data dsi1_panel = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 3e1c507fb01f..aeb9e88e0a2a 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -497,8 +497,7 @@ static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) { - gpio_free(HDMI_GPIO_LS_OE); - gpio_free(HDMI_GPIO_HPD); + gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); } static struct omap_dss_device omap4_panda_hdmi_device = { -- GitLab From 3932a32fcf5393f8be70ac99dc718ad7ad0a415b Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 10:49:38 +0200 Subject: [PATCH 0252/1359] OMAP: 4430SDP/Panda: rename HPD GPIO to CT_CP_HPD The GPIO 60 on 4430sdp and Panda is not HPD GPIO, as currently marked in the board files, but CT_CP_HPD, which is used to enable/disable HPD functionality. This patch renames the GPIO. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 4 ++-- arch/arm/mach-omap2/board-omap4panda.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 7bbe23ee3e35..02a4d5f3e8c8 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -52,7 +52,7 @@ #define ETH_KS8851_QUART 138 #define OMAP4_SFH7741_SENSOR_OUTPUT_GPIO 184 #define OMAP4_SFH7741_ENABLE_GPIO 188 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ #define DLP_POWER_ON_GPIO 40 @@ -596,7 +596,7 @@ static void __init omap_sfh7741prox_init(void) } static struct gpio sdp4430_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, }; diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index aeb9e88e0a2a..844e285b40a3 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -51,7 +51,7 @@ #define GPIO_HUB_NRESET 62 #define GPIO_WIFI_PMENA 43 #define GPIO_WIFI_IRQ 53 -#define HDMI_GPIO_HPD 60 /* Hot plug pin for HDMI */ +#define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ /* wl127x BT, FM, GPS connectivity chip */ @@ -479,7 +479,7 @@ int __init omap4_panda_dvi_init(void) } static struct gpio panda_hdmi_gpios[] = { - { HDMI_GPIO_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_hpd" }, + { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, }; -- GitLab From 7bb122d155f742fe2d79849090c825be7b4a247e Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 10:59:00 +0200 Subject: [PATCH 0253/1359] OMAPDSS: remove wrong HDMI HPD muxing "hdmi_hpd" pin is muxed to INPUT and PULLUP, but the pin is not currently used, and in the future when it is used, the pin is used as a GPIO and is board specific, not an OMAP4 wide thing. So remove the muxing for now. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/display.c | 4 ---- 1 file changed, 4 deletions(-) diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index ffd9bd983023..d6e65e29d83d 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -102,12 +102,8 @@ static void omap4_hdmi_mux_pads(enum omap_hdmi_flags flags) u32 reg; u16 control_i2c_1; - /* PAD0_HDMI_HPD_PAD1_HDMI_CEC */ - omap_mux_init_signal("hdmi_hpd", - OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_cec", OMAP_PIN_INPUT_PULLUP); - /* PAD0_HDMI_DDC_SCL_PAD1_HDMI_DDC_SDA */ omap_mux_init_signal("hdmi_ddc_scl", OMAP_PIN_INPUT_PULLUP); omap_mux_init_signal("hdmi_ddc_sda", -- GitLab From 78a1ad8f12db70b8b0a4548b90704de08ee216ce Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:02:36 +0200 Subject: [PATCH 0254/1359] OMAP: 4430SDP/Panda: setup HDMI GPIO muxes The HDMI GPIO pins LS_OE and CT_CP_HPD are not currently configured. This patch configures them as output pins. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 3 +++ arch/arm/mach-omap2/board-omap4panda.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 02a4d5f3e8c8..95766cdfc57f 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -821,6 +821,9 @@ static void omap_4430sdp_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 844e285b40a3..982397269360 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -538,6 +538,9 @@ void omap4_panda_display_init(void) omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP); else omap_hdmi_init(0); + + omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); } static void __init omap4_panda_init(void) -- GitLab From aa74274b464d4aa24703963ac89a0ee942d5d267 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:05:32 +0200 Subject: [PATCH 0255/1359] OMAP: 4430SDP/Panda: add HDMI HPD gpio Both Panda and 4430SDP use GPIO 63 as HDMI hot-plug-detect. Configure this GPIO in the board files. Signed-off-by: Tomi Valkeinen Acked-by: Tony Lindgren --- arch/arm/mach-omap2/board-4430sdp.c | 3 +++ arch/arm/mach-omap2/board-omap4panda.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index 95766cdfc57f..cd6ec517a929 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -54,6 +54,7 @@ #define OMAP4_SFH7741_ENABLE_GPIO 188 #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ #define DISPLAY_SEL_GPIO 59 /* LCD2/PicoDLP switch */ #define DLP_POWER_ON_GPIO 40 @@ -598,6 +599,7 @@ static void __init omap_sfh7741prox_init(void) static struct gpio sdp4430_hdmi_gpios[] = { { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int sdp4430_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -824,6 +826,7 @@ static void omap_4430sdp_display_init(void) omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } #ifdef CONFIG_OMAP_MUX diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 982397269360..e1b196361f95 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -53,6 +53,7 @@ #define GPIO_WIFI_IRQ 53 #define HDMI_GPIO_CT_CP_HPD 60 /* HPD mode enable/disable */ #define HDMI_GPIO_LS_OE 41 /* Level shifter for HDMI */ +#define HDMI_GPIO_HPD 63 /* Hotplug detect */ /* wl127x BT, FM, GPS connectivity chip */ static int wl1271_gpios[] = {46, -1, -1}; @@ -481,6 +482,7 @@ int __init omap4_panda_dvi_init(void) static struct gpio panda_hdmi_gpios[] = { { HDMI_GPIO_CT_CP_HPD, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ct_cp_hpd" }, { HDMI_GPIO_LS_OE, GPIOF_OUT_INIT_HIGH, "hdmi_gpio_ls_oe" }, + { HDMI_GPIO_HPD, GPIOF_DIR_IN, "hdmi_gpio_hpd" }, }; static int omap4_panda_panel_enable_hdmi(struct omap_dss_device *dssdev) @@ -541,6 +543,7 @@ void omap4_panda_display_init(void) omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT); omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT); + omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN); } static void __init omap4_panda_init(void) -- GitLab From c49d005b6cc8491fad5b24f82805be2d6bcbd3dd Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 17 Jan 2012 11:09:57 +0200 Subject: [PATCH 0256/1359] OMAPDSS: HDMI: PHY burnout fix A hardware bug in the OMAP4 HDMI PHY causes physical damage to the board if the HDMI PHY is kept powered on when the cable is not connected. This patch solves the problem by adding hot-plug-detection into the HDMI IP driver. This is not a real HPD support in the sense that nobody else than the IP driver gets to know about the HPD events, but is only meant to fix the HW bug. The strategy is simple: If the display device is turned off by the user, the PHY power is set to OFF. When the display device is turned on by the user, the PHY power is set either to LDOON or TXON, depending on whether the HDMI cable is connected. The reason to avoid PHY OFF when the display device is on, but the cable is disconnected, is that when the PHY is turned OFF, the HDMI IP is not "ticking" and thus the DISPC does not receive pixel clock from the HDMI IP. This would, for example, prevent any VSYNCs from happening, and would thus affect the users of omapdss. By using LDOON when the cable is disconnected we'll avoid the HW bug, but keep the HDMI working as usual from the user's point of view. Signed-off-by: Tomi Valkeinen --- arch/arm/mach-omap2/board-4430sdp.c | 5 ++ arch/arm/mach-omap2/board-omap4panda.c | 5 ++ drivers/video/omap2/dss/hdmi.c | 3 + drivers/video/omap2/dss/ti_hdmi.h | 4 ++ drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c | 68 +++++++++++++++++++++-- include/video/omapdss.h | 5 ++ 6 files changed, 86 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c index cd6ec517a929..0ce758edaad2 100644 --- a/arch/arm/mach-omap2/board-4430sdp.c +++ b/arch/arm/mach-omap2/board-4430sdp.c @@ -732,6 +732,10 @@ static void sdp4430_lcd_init(void) pr_err("%s: Could not get lcd2_reset_gpio\n", __func__); } +static struct omap_dss_hdmi_data sdp4430_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device sdp4430_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -739,6 +743,7 @@ static struct omap_dss_device sdp4430_hdmi_device = { .platform_enable = sdp4430_panel_enable_hdmi, .platform_disable = sdp4430_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &sdp4430_hdmi_data, }; static struct picodlp_panel_data sdp4430_picodlp_pdata = { diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index e1b196361f95..370c4b428888 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -502,6 +502,10 @@ static void omap4_panda_panel_disable_hdmi(struct omap_dss_device *dssdev) gpio_free_array(panda_hdmi_gpios, ARRAY_SIZE(panda_hdmi_gpios)); } +static struct omap_dss_hdmi_data omap4_panda_hdmi_data = { + .hpd_gpio = HDMI_GPIO_HPD, +}; + static struct omap_dss_device omap4_panda_hdmi_device = { .name = "hdmi", .driver_name = "hdmi_panel", @@ -509,6 +513,7 @@ static struct omap_dss_device omap4_panda_hdmi_device = { .platform_enable = omap4_panda_panel_enable_hdmi, .platform_disable = omap4_panda_panel_disable_hdmi, .channel = OMAP_DSS_CHANNEL_DIGIT, + .data = &omap4_panda_hdmi_data, }; static struct omap_dss_device *omap4_panda_dss_devices[] = { diff --git a/drivers/video/omap2/dss/hdmi.c b/drivers/video/omap2/dss/hdmi.c index c39f9c3a92cf..d7aa3b056529 100644 --- a/drivers/video/omap2/dss/hdmi.c +++ b/drivers/video/omap2/dss/hdmi.c @@ -497,6 +497,7 @@ bool omapdss_hdmi_detect(void) int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev) { + struct omap_dss_hdmi_data *priv = dssdev->data; int r = 0; DSSDBG("ENTER hdmi_display_enable\n"); @@ -509,6 +510,8 @@ int omapdss_hdmi_display_enable(struct omap_dss_device *dssdev) goto err0; } + hdmi.ip_data.hpd_gpio = priv->hpd_gpio; + r = omap_dss_start_device(dssdev); if (r) { DSSERR("failed to start device\n"); diff --git a/drivers/video/omap2/dss/ti_hdmi.h b/drivers/video/omap2/dss/ti_hdmi.h index 7503f7f619a7..50dadba5070a 100644 --- a/drivers/video/omap2/dss/ti_hdmi.h +++ b/drivers/video/omap2/dss/ti_hdmi.h @@ -126,6 +126,10 @@ struct hdmi_ip_data { const struct ti_hdmi_ip_ops *ops; struct hdmi_config cfg; struct hdmi_pll_info pll_data; + + /* ti_hdmi_4xxx_ip private data. These should be in a separate struct */ + int hpd_gpio; + bool phy_tx_enabled; }; int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data); void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data); diff --git a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c index 9af81f18f163..2d72334ca3da 100644 --- a/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c +++ b/drivers/video/omap2/dss/ti_hdmi_4xxx_ip.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "ti_hdmi_4xxx_ip.h" #include "dss.h" @@ -223,6 +224,49 @@ void ti_hdmi_4xxx_pll_disable(struct hdmi_ip_data *ip_data) hdmi_set_pll_pwr(ip_data, HDMI_PLLPWRCMD_ALLOFF); } +static int hdmi_check_hpd_state(struct hdmi_ip_data *ip_data) +{ + unsigned long flags; + bool hpd; + int r; + /* this should be in ti_hdmi_4xxx_ip private data */ + static DEFINE_SPINLOCK(phy_tx_lock); + + spin_lock_irqsave(&phy_tx_lock, flags); + + hpd = gpio_get_value(ip_data->hpd_gpio); + + if (hpd == ip_data->phy_tx_enabled) { + spin_unlock_irqrestore(&phy_tx_lock, flags); + return 0; + } + + if (hpd) + r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON); + else + r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_LDOON); + + if (r) { + DSSERR("Failed to %s PHY TX power\n", + hpd ? "enable" : "disable"); + goto err; + } + + ip_data->phy_tx_enabled = hpd; +err: + spin_unlock_irqrestore(&phy_tx_lock, flags); + return r; +} + +static irqreturn_t hpd_irq_handler(int irq, void *data) +{ + struct hdmi_ip_data *ip_data = data; + + hdmi_check_hpd_state(ip_data); + + return IRQ_HANDLED; +} + int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) { u16 r = 0; @@ -232,10 +276,6 @@ int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) if (r) return r; - r = hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_TXON); - if (r) - return r; - /* * Read address 0 in order to get the SCP reset done completed * Dummy access performed to make sure reset is done @@ -257,12 +297,32 @@ int ti_hdmi_4xxx_phy_enable(struct hdmi_ip_data *ip_data) /* Write to phy address 3 to change the polarity control */ REG_FLD_MOD(phy_base, HDMI_TXPHY_PAD_CFG_CTRL, 0x1, 27, 27); + r = request_threaded_irq(gpio_to_irq(ip_data->hpd_gpio), + NULL, hpd_irq_handler, + IRQF_DISABLED | IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, "hpd", ip_data); + if (r) { + DSSERR("HPD IRQ request failed\n"); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + return r; + } + + r = hdmi_check_hpd_state(ip_data); + if (r) { + free_irq(gpio_to_irq(ip_data->hpd_gpio), ip_data); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + return r; + } + return 0; } void ti_hdmi_4xxx_phy_disable(struct hdmi_ip_data *ip_data) { + free_irq(gpio_to_irq(ip_data->hpd_gpio), ip_data); + hdmi_set_phy_pwr(ip_data, HDMI_PHYPWRCMD_OFF); + ip_data->phy_tx_enabled = false; } static int hdmi_core_ddc_init(struct hdmi_ip_data *ip_data) diff --git a/include/video/omapdss.h b/include/video/omapdss.h index 062b3b24ff10..483f67caa7ad 100644 --- a/include/video/omapdss.h +++ b/include/video/omapdss.h @@ -590,6 +590,11 @@ struct omap_dss_device { int (*get_backlight)(struct omap_dss_device *dssdev); }; +struct omap_dss_hdmi_data +{ + int hpd_gpio; +}; + struct omap_dss_driver { struct device_driver driver; -- GitLab From 7c0c34544d71b10914f29383c119d80631f367b7 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Thu, 5 Jan 2012 19:33:08 -0200 Subject: [PATCH 0257/1359] ARM: imx: iomux-v1.h: Fix build error due to __init annotation Fix the following build error found when building imx_v4_v5_defconfig: CC arch/arm/mach-imx/mach-imx27ipcam.o In file included from arch/arm/plat-mxc/include/mach/iomux-mx27.h:23, from arch/arm/mach-imx/mach-imx27ipcam.c:22: arch/arm/plat-mxc/include/mach/iomux-v1.h:99: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'imx_iomuxv1_init' Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer --- arch/arm/plat-mxc/include/mach/iomux-v1.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/plat-mxc/include/mach/iomux-v1.h b/arch/arm/plat-mxc/include/mach/iomux-v1.h index 6fa8a707b9a0..f7d18046c04f 100644 --- a/arch/arm/plat-mxc/include/mach/iomux-v1.h +++ b/arch/arm/plat-mxc/include/mach/iomux-v1.h @@ -96,6 +96,6 @@ extern int mxc_gpio_mode(int gpio_mode); extern int mxc_gpio_setup_multiple_pins(const int *pin_list, unsigned count, const char *label); -extern int __init imx_iomuxv1_init(void __iomem *base, int numports); +extern int imx_iomuxv1_init(void __iomem *base, int numports); #endif /* __MACH_IOMUX_V1_H__ */ -- GitLab From 945f82f25f9c49b93c315e0acc6d965cb37e137f Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 12 Jan 2012 10:55:12 +0100 Subject: [PATCH 0258/1359] arch/arm/mach-imx/mach-mx53_ard.c: add missing iounmap Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // Signed-off-by: Julia Lawall Signed-off-by: Sascha Hauer --- arch/arm/mach-mx5/board-mx53_ard.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-mx5/board-mx53_ard.c index 5f224f1c3eb6..d4aac813cca8 100644 --- a/arch/arm/mach-mx5/board-mx53_ard.c +++ b/arch/arm/mach-mx5/board-mx53_ard.c @@ -189,8 +189,10 @@ static int weim_cs_config(void) return -ENOMEM; iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K); - if (!iomuxc_base) + if (!iomuxc_base) { + iounmap(weim_base); return -ENOMEM; + } /* CS1 timings for LAN9220 */ writel(0x20001, (weim_base + 0x18)); -- GitLab From de849eecd0addaa6bf60f2f7be36b30abf9ff2ae Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 20 Jan 2012 08:17:33 -0800 Subject: [PATCH 0259/1359] pinctrl: fix some pinmux typos Fix some pinmux typos so implementing pinmux drivers is a bit easier. Signed-off-by: Tony Lindgren Signed-off-by: Linus Walleij --- Documentation/pinctrl.txt | 2 +- drivers/pinctrl/pinmux.c | 9 ++------- 2 files changed, 3 insertions(+), 8 deletions(-) diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index 5324d3199f34..150fd3833d0b 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -1024,7 +1024,7 @@ it, disables and releases it, and muxes it in on the pins defined by group B: foo_switch() { - struct pinmux pmx; + struct pinmux *pmx; /* Enable on position A */ pmx = pinmux_get(&device, "spi0-pos-A"); diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index 0b22037965b9..f4f8c7e4b1c8 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -53,11 +53,6 @@ struct pinmux_group { * @dev: the device using this pinmux * @usecount: the number of active users of this mux setting, used to keep * track of nested use cases - * @pins: an array of discrete physical pins used in this mapping, taken - * from the global pin enumeration space (copied from pinmux map) - * @num_pins: the number of pins in this mapping array, i.e. the number of - * elements in .pins so we can iterate over that array (copied from - * pinmux map) * @pctldev: pin control device handling this pinmux * @func_selector: the function selector for the pinmux device handling * this pinmux @@ -409,7 +404,7 @@ int __init pinmux_register_mappings(struct pinmux_map const *maps, } /** - * acquire_pins() - acquire all the pins for a certain funcion on a pinmux + * acquire_pins() - acquire all the pins for a certain function on a pinmux * @pctldev: the device to take the pins on * @func_selector: the function selector to acquire the pins for * @group_selector: the group selector containing the pins to acquire @@ -455,7 +450,7 @@ static int acquire_pins(struct pinctrl_dev *pctldev, /** * release_pins() - release pins taken by earlier acquirement - * @pctldev: the device to free the pinx on + * @pctldev: the device to free the pins on * @group_selector: the group selector containing the pins to free */ static void release_pins(struct pinctrl_dev *pctldev, -- GitLab From 9e2551e10b5c7ba550849bd9ed519e498cc30e68 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Fri, 20 Jan 2012 07:43:53 -0800 Subject: [PATCH 0260/1359] pinctrl: fix pinmux_hog_maps when ctrl_dev_name is not set The ctrl_dev_name is optional for struct pinmux_map assuming that ctrl_dev is set. Without this patch we can get: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... (pinmux_hog_maps+0xa4/0x20c) (pinctrl_register+0x2a4/0x378) ... Fix this by adding adding a test for map->ctrl_dev. Additionally move the test for map->ctrl_dev earlier to optimize out the loop a bit. Signed-off-by: Tony Lindgren Acked-by: Stephen Warren Signed-off-by: Linus Walleij --- drivers/pinctrl/pinmux.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index f4f8c7e4b1c8..3ffa9324ed82 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -978,9 +978,12 @@ int pinmux_hog_maps(struct pinctrl_dev *pctldev) for (i = 0; i < pinmux_maps_num; i++) { struct pinmux_map const *map = &pinmux_maps[i]; - if (((map->ctrl_dev == dev) || - !strcmp(map->ctrl_dev_name, devname)) && - map->hog_on_boot) { + if (!map->hog_on_boot) + continue; + + if ((map->ctrl_dev == dev) || + (map->ctrl_dev_name && + !strcmp(map->ctrl_dev_name, devname))) { /* OK time to hog! */ ret = pinmux_hog_map(pctldev, map); if (ret) -- GitLab From b9130b776ee481acbc27a7e56d98df75680de369 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 24 Jan 2012 16:28:08 -0800 Subject: [PATCH 0261/1359] pinctrl: add checks for empty function names This is needed as otherwise we can get the following when dealing with buggy data in a pinmux driver for pinmux_search_function: Unable to handle kernel NULL pointer dereference at virtual address 00000000 ... PC is at strcmp+0xc/0x34 LR is at pinmux_get+0x350/0x8f4 ... As we need pctldev initialized to call ops->list_functions, let's initialize it before check_ops calls and pass the pctldev to the check_ops functions. Do this for both pinmux and pinconf check_ops functions. Signed-off-by: Tony Lindgren Signed-off-by: Linus Walleij --- drivers/pinctrl/core.c | 36 ++++++++++++++++++------------------ drivers/pinctrl/pinconf.c | 4 +++- drivers/pinctrl/pinconf.h | 4 ++-- drivers/pinctrl/pinmux.c | 17 ++++++++++++++++- drivers/pinctrl/pinmux.h | 4 ++-- 5 files changed, 41 insertions(+), 24 deletions(-) diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index d9d35fcbfc6b..8fe15cf15ac8 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -583,40 +583,40 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc, if (pctldesc->name == NULL) return NULL; + pctldev = kzalloc(sizeof(struct pinctrl_dev), GFP_KERNEL); + if (pctldev == NULL) + return NULL; + + /* Initialize pin control device struct */ + pctldev->owner = pctldesc->owner; + pctldev->desc = pctldesc; + pctldev->driver_data = driver_data; + INIT_RADIX_TREE(&pctldev->pin_desc_tree, GFP_KERNEL); + spin_lock_init(&pctldev->pin_desc_tree_lock); + INIT_LIST_HEAD(&pctldev->gpio_ranges); + mutex_init(&pctldev->gpio_ranges_lock); + pctldev->dev = dev; + /* If we're implementing pinmuxing, check the ops for sanity */ if (pctldesc->pmxops) { - ret = pinmux_check_ops(pctldesc->pmxops); + ret = pinmux_check_ops(pctldev); if (ret) { pr_err("%s pinmux ops lacks necessary functions\n", pctldesc->name); - return NULL; + goto out_err; } } /* If we're implementing pinconfig, check the ops for sanity */ if (pctldesc->confops) { - ret = pinconf_check_ops(pctldesc->confops); + ret = pinconf_check_ops(pctldev); if (ret) { pr_err("%s pin config ops lacks necessary functions\n", pctldesc->name); - return NULL; + goto out_err; } } - pctldev = kzalloc(sizeof(struct pinctrl_dev), GFP_KERNEL); - if (pctldev == NULL) - return NULL; - - /* Initialize pin control device struct */ - pctldev->owner = pctldesc->owner; - pctldev->desc = pctldesc; - pctldev->driver_data = driver_data; - INIT_RADIX_TREE(&pctldev->pin_desc_tree, GFP_KERNEL); - spin_lock_init(&pctldev->pin_desc_tree_lock); - INIT_LIST_HEAD(&pctldev->gpio_ranges); - mutex_init(&pctldev->gpio_ranges_lock); - pctldev->dev = dev; - /* Register all the pins */ pr_debug("try to register %d pins on %s...\n", pctldesc->npins, pctldesc->name); diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index 1892a3794b99..9fb75456824c 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -205,8 +205,10 @@ int pin_config_group_set(const char *dev_name, const char *pin_group, } EXPORT_SYMBOL(pin_config_group_set); -int pinconf_check_ops(const struct pinconf_ops *ops) +int pinconf_check_ops(struct pinctrl_dev *pctldev) { + const struct pinconf_ops *ops = pctldev->desc->confops; + /* We must be able to read out pin status */ if (!ops->pin_config_get && !ops->pin_config_group_get) return -EINVAL; diff --git a/drivers/pinctrl/pinconf.h b/drivers/pinctrl/pinconf.h index e7dc6165032a..006b77fa737e 100644 --- a/drivers/pinctrl/pinconf.h +++ b/drivers/pinctrl/pinconf.h @@ -13,7 +13,7 @@ #ifdef CONFIG_PINCONF -int pinconf_check_ops(const struct pinconf_ops *ops); +int pinconf_check_ops(struct pinctrl_dev *pctldev); void pinconf_init_device_debugfs(struct dentry *devroot, struct pinctrl_dev *pctldev); int pin_config_get_for_pin(struct pinctrl_dev *pctldev, unsigned pin, @@ -23,7 +23,7 @@ int pin_config_set_for_pin(struct pinctrl_dev *pctldev, unsigned pin, #else -static inline int pinconf_check_ops(const struct pinconf_ops *ops) +static inline int pinconf_check_ops(struct pinctrl_dev *pctldev) { return 0; } diff --git a/drivers/pinctrl/pinmux.c b/drivers/pinctrl/pinmux.c index 3ffa9324ed82..7c3193f7a044 100644 --- a/drivers/pinctrl/pinmux.c +++ b/drivers/pinctrl/pinmux.c @@ -889,8 +889,11 @@ void pinmux_disable(struct pinmux *pmx) } EXPORT_SYMBOL_GPL(pinmux_disable); -int pinmux_check_ops(const struct pinmux_ops *ops) +int pinmux_check_ops(struct pinctrl_dev *pctldev) { + const struct pinmux_ops *ops = pctldev->desc->pmxops; + unsigned selector = 0; + /* Check that we implement required operations */ if (!ops->list_functions || !ops->get_function_name || @@ -899,6 +902,18 @@ int pinmux_check_ops(const struct pinmux_ops *ops) !ops->disable) return -EINVAL; + /* Check that all functions registered have names */ + while (ops->list_functions(pctldev, selector) >= 0) { + const char *fname = ops->get_function_name(pctldev, + selector); + if (!fname) { + pr_err("pinmux ops has no name for function%u\n", + selector); + return -EINVAL; + } + selector++; + } + return 0; } diff --git a/drivers/pinctrl/pinmux.h b/drivers/pinctrl/pinmux.h index 844500b3331b..97f52223fbc2 100644 --- a/drivers/pinctrl/pinmux.h +++ b/drivers/pinctrl/pinmux.h @@ -12,7 +12,7 @@ */ #ifdef CONFIG_PINMUX -int pinmux_check_ops(const struct pinmux_ops *ops); +int pinmux_check_ops(struct pinctrl_dev *pctldev); void pinmux_init_device_debugfs(struct dentry *devroot, struct pinctrl_dev *pctldev); void pinmux_init_debugfs(struct dentry *subsys_root); @@ -21,7 +21,7 @@ void pinmux_unhog_maps(struct pinctrl_dev *pctldev); #else -static inline int pinmux_check_ops(const struct pinmux_ops *ops) +static inline int pinmux_check_ops(struct pinctrl_dev *pctldev) { return 0; } -- GitLab From b3a81520bd37a28f77cb0f7002086fb14061824d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 26 Jan 2012 15:56:16 +0100 Subject: [PATCH 0262/1359] ALSA: hda - Fix silent output on Haier W18 laptop The very same problem is seen on Haier W18 laptop with ALC861 as seen on ASUS A6Rp, which was fixed by the commit 3b25eb69. Now we just need to add a new SSID entry pointing to the same fixup. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=42656 Cc: [v3.2+] Signed-off-by: Takashi Iwai --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index a23479926f89..0db1dc49382b 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -5610,6 +5610,7 @@ static const struct alc_fixup alc861_fixups[] = { static const struct snd_pci_quirk alc861_fixup_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1393, "ASUS A6Rp", PINFIX_ASUS_A6RP), + SND_PCI_QUIRK(0x1584, 0x2b01, "Haier W18", PINFIX_ASUS_A6RP), SND_PCI_QUIRK(0x1734, 0x10c7, "FSC Amilo Pi1505", PINFIX_FSC_AMILO_PI1505), {} }; -- GitLab From 073862ba5d249c20bd5c49fc6d904ff0e1f6a672 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 26 Jan 2012 00:41:38 +0000 Subject: [PATCH 0263/1359] netns: fix net_alloc_generic() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When a new net namespace is created, we should attach to it a "struct net_generic" with enough slots (even empty), or we can hit the following BUG_ON() : [ 200.752016] kernel BUG at include/net/netns/generic.h:40! ... [ 200.752016] [] ? get_cfcnfg+0x3a/0x180 [ 200.752016] [] ? lockdep_rtnl_is_held+0x10/0x20 [ 200.752016] [] caif_device_notify+0x2e/0x530 [ 200.752016] [] notifier_call_chain+0x67/0x110 [ 200.752016] [] raw_notifier_call_chain+0x11/0x20 [ 200.752016] [] call_netdevice_notifiers+0x32/0x60 [ 200.752016] [] register_netdevice+0x196/0x300 [ 200.752016] [] register_netdev+0x19/0x30 [ 200.752016] [] loopback_net_init+0x4a/0xa0 [ 200.752016] [] ops_init+0x42/0x180 [ 200.752016] [] setup_net+0x6b/0x100 [ 200.752016] [] copy_net_ns+0x86/0x110 [ 200.752016] [] create_new_namespaces+0xd9/0x190 net_alloc_generic() should take into account the maximum index into the ptr array, as a subsystem might use net_generic() anytime. This also reduces number of reallocations in net_assign_generic() Reported-by: Sasha Levin Tested-by: Sasha Levin Signed-off-by: Eric Dumazet Cc: Sjur Brændeland Cc: Eric W. Biederman Cc: Pavel Emelyanov Signed-off-by: David S. Miller --- net/core/net_namespace.c | 31 ++++++++++++++++--------------- 1 file changed, 16 insertions(+), 15 deletions(-) diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index aefcd7acbffa..0e950fda9a0a 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -30,6 +30,20 @@ EXPORT_SYMBOL(init_net); #define INITIAL_NET_GEN_PTRS 13 /* +1 for len +2 for rcu_head */ +static unsigned int max_gen_ptrs = INITIAL_NET_GEN_PTRS; + +static struct net_generic *net_alloc_generic(void) +{ + struct net_generic *ng; + size_t generic_size = offsetof(struct net_generic, ptr[max_gen_ptrs]); + + ng = kzalloc(generic_size, GFP_KERNEL); + if (ng) + ng->len = max_gen_ptrs; + + return ng; +} + static int net_assign_generic(struct net *net, int id, void *data) { struct net_generic *ng, *old_ng; @@ -43,8 +57,7 @@ static int net_assign_generic(struct net *net, int id, void *data) if (old_ng->len >= id) goto assign; - ng = kzalloc(sizeof(struct net_generic) + - id * sizeof(void *), GFP_KERNEL); + ng = net_alloc_generic(); if (ng == NULL) return -ENOMEM; @@ -59,7 +72,6 @@ static int net_assign_generic(struct net *net, int id, void *data) * the old copy for kfree after a grace period. */ - ng->len = id; memcpy(&ng->ptr, &old_ng->ptr, old_ng->len * sizeof(void*)); rcu_assign_pointer(net->gen, ng); @@ -161,18 +173,6 @@ out_undo: goto out; } -static struct net_generic *net_alloc_generic(void) -{ - struct net_generic *ng; - size_t generic_size = sizeof(struct net_generic) + - INITIAL_NET_GEN_PTRS * sizeof(void *); - - ng = kzalloc(generic_size, GFP_KERNEL); - if (ng) - ng->len = INITIAL_NET_GEN_PTRS; - - return ng; -} #ifdef CONFIG_NET_NS static struct kmem_cache *net_cachep; @@ -483,6 +483,7 @@ again: } return error; } + max_gen_ptrs = max_t(unsigned int, max_gen_ptrs, *ops->id); } error = __register_pernet_operations(list, ops); if (error) { -- GitLab From 590dfe2f3bbbbeee806ee91bef68ba2a6afc16d2 Mon Sep 17 00:00:00 2001 From: Michal Kubecek Date: Wed, 25 Jan 2012 16:51:05 +0100 Subject: [PATCH 0264/1359] agp: fix scratch page cleanup In error cleanup of agp_backend_initialize() and in agp_backend_cleanup(), agp_destroy_page() is passed virtual address of the scratch page. This leads to a kernel warning if the initialization fails (or upon regular cleanup) as pointer to struct page should be passed instead. Signed-off-by: Michal Kubecek Signed-off-by: Dave Airlie --- drivers/char/agp/backend.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c index 4b71647782d0..317c28ce8328 100644 --- a/drivers/char/agp/backend.c +++ b/drivers/char/agp/backend.c @@ -194,10 +194,10 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge) err_out: if (bridge->driver->needs_scratch_page) { - void *va = page_address(bridge->scratch_page_page); + struct page *page = bridge->scratch_page_page; - bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); - bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); + bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_UNMAP); + bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_FREE); } if (got_gatt) bridge->driver->free_gatt_table(bridge); @@ -221,10 +221,10 @@ static void agp_backend_cleanup(struct agp_bridge_data *bridge) if (bridge->driver->agp_destroy_page && bridge->driver->needs_scratch_page) { - void *va = page_address(bridge->scratch_page_page); + struct page *page = bridge->scratch_page_page; - bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); - bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); + bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_UNMAP); + bridge->driver->agp_destroy_page(page, AGP_PAGE_DESTROY_FREE); } } -- GitLab From 4ca9b72b71f10147bd21969c1805f5b2c4ca7b7b Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Wed, 25 Jan 2012 11:50:51 +0100 Subject: [PATCH 0265/1359] sched: Fix rq->nr_uninterruptible update race KOSAKI Motohiro noticed the following race: > CPU0 CPU1 > -------------------------------------------------------- > deactivate_task() > task->state = TASK_UNINTERRUPTIBLE; > activate_task() > rq->nr_uninterruptible--; > > schedule() > deactivate_task() > rq->nr_uninterruptible++; > Kosaki-San's scenario is possible when CPU0 runs __sched_setscheduler() against CPU1's current @task. __sched_setscheduler() does a dequeue/enqueue in order to move the task to its new queue (position) to reflect the newly provided scheduling parameters. However it should be completely invariant to nr_uninterruptible accounting, sched_setscheduler() doesn't affect readyness to run, merely policy on when to run. So convert the inappropriate activate/deactivate_task usage to enqueue/dequeue_task, which avoids the nr_uninterruptible accounting. Also convert the two other sites: __migrate_task() and normalize_task() that still use activate/deactivate_task. These sites aren't really a problem since __migrate_task() will only be called on non-running task (and therefore are immume to the described problem) and normalize_task() isn't ever used on regular systems. Also remove the comments from activate/deactivate_task since they're misleading at best. Reported-by: KOSAKI Motohiro Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1327486224.2614.45.camel@laptop Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 18 ++++++------------ 1 file changed, 6 insertions(+), 12 deletions(-) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index df00cb09263e..e067df1fd01a 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -723,9 +723,6 @@ static void dequeue_task(struct rq *rq, struct task_struct *p, int flags) p->sched_class->dequeue_task(rq, p, flags); } -/* - * activate_task - move a task to the runqueue. - */ void activate_task(struct rq *rq, struct task_struct *p, int flags) { if (task_contributes_to_load(p)) @@ -734,9 +731,6 @@ void activate_task(struct rq *rq, struct task_struct *p, int flags) enqueue_task(rq, p, flags); } -/* - * deactivate_task - remove a task from the runqueue. - */ void deactivate_task(struct rq *rq, struct task_struct *p, int flags) { if (task_contributes_to_load(p)) @@ -4134,7 +4128,7 @@ recheck: on_rq = p->on_rq; running = task_current(rq, p); if (on_rq) - deactivate_task(rq, p, 0); + dequeue_task(rq, p, 0); if (running) p->sched_class->put_prev_task(rq, p); @@ -4147,7 +4141,7 @@ recheck: if (running) p->sched_class->set_curr_task(rq); if (on_rq) - activate_task(rq, p, 0); + enqueue_task(rq, p, 0); check_class_changed(rq, p, prev_class, oldprio); task_rq_unlock(rq, p, &flags); @@ -4998,9 +4992,9 @@ static int __migrate_task(struct task_struct *p, int src_cpu, int dest_cpu) * placed properly. */ if (p->on_rq) { - deactivate_task(rq_src, p, 0); + dequeue_task(rq_src, p, 0); set_task_cpu(p, dest_cpu); - activate_task(rq_dest, p, 0); + enqueue_task(rq_dest, p, 0); check_preempt_curr(rq_dest, p, 0); } done: @@ -7032,10 +7026,10 @@ static void normalize_task(struct rq *rq, struct task_struct *p) on_rq = p->on_rq; if (on_rq) - deactivate_task(rq, p, 0); + dequeue_task(rq, p, 0); __setscheduler(rq, p, SCHED_NORMAL, 0); if (on_rq) { - activate_task(rq, p, 0); + enqueue_task(rq, p, 0); resched_task(rq->curr); } -- GitLab From db7e527da41560f597ccdc4417cefa6b7657c0c0 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 11 Jan 2012 08:58:16 +0100 Subject: [PATCH 0266/1359] sched/s390: Fix compile error in sched/core.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 029632fbb7b7c9d85063cc9eb470de6c54873df3 ("sched: Make separate sched*.c translation units") removed the include of asm/mutex.h from sched.c. This breaks the combination of: CONFIG_MUTEX_SPIN_ON_OWNER=yes CONFIG_HAVE_ARCH_MUTEX_CPU_RELAX=yes like s390 without mutex debugging: CC kernel/sched/core.o kernel/sched/core.c: In function ‘mutex_spin_on_owner’: kernel/sched/core.c:3287: error: implicit declaration of function ‘arch_mutex_cpu_relax’ Lets re-add the include to kernel/sched/core.c Signed-off-by: Christian Borntraeger Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1326268696-30904-1-git-send-email-borntraeger@de.ibm.com Signed-off-by: Ingo Molnar --- kernel/sched/core.c | 1 + 1 file changed, 1 insertion(+) diff --git a/kernel/sched/core.c b/kernel/sched/core.c index e067df1fd01a..5255c9d2e053 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -74,6 +74,7 @@ #include #include +#include #ifdef CONFIG_PARAVIRT #include #endif -- GitLab From 71325960d16cd68ea0e22a8da15b2495b0f363f7 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 19 Jan 2012 18:28:57 -0800 Subject: [PATCH 0267/1359] sched/nohz: Fix nohz cpu idle load balancing state with cpu hotplug With the recent nohz scheduler changes, rq's nohz flag 'NOHZ_TICK_STOPPED' and its associated state doesn't get cleared immediately after the cpu exits idle. This gets cleared as part of the next tick seen on that cpu. For the cpu offline support, we need to clear this state manually. Fix it by registering a cpu notifier, which clears the nohz idle load balance state for this rq explicitly during the CPU_DYING notification. There won't be any nohz updates for that cpu, after the CPU_DYING notification. But lets be extra paranoid and skip updating the nohz state in the select_nohz_load_balancer() if the cpu is not in active state anymore. Reported-by: Srivatsa S. Bhat Reviewed-and-tested-by: Srivatsa S. Bhat Tested-by: Sergey Senozhatsky Signed-off-by: Suresh Siddha Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1327026538.16150.40.camel@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar --- kernel/sched/fair.c | 34 +++++++++++++++++++++++++++++----- 1 file changed, 29 insertions(+), 5 deletions(-) diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 84adb2d66cbd..7c6414fc669d 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -4866,6 +4866,15 @@ static void nohz_balancer_kick(int cpu) return; } +static inline void clear_nohz_tick_stopped(int cpu) +{ + if (unlikely(test_bit(NOHZ_TICK_STOPPED, nohz_flags(cpu)))) { + cpumask_clear_cpu(cpu, nohz.idle_cpus_mask); + atomic_dec(&nohz.nr_cpus); + clear_bit(NOHZ_TICK_STOPPED, nohz_flags(cpu)); + } +} + static inline void set_cpu_sd_state_busy(void) { struct sched_domain *sd; @@ -4904,6 +4913,12 @@ void select_nohz_load_balancer(int stop_tick) { int cpu = smp_processor_id(); + /* + * If this cpu is going down, then nothing needs to be done. + */ + if (!cpu_active(cpu)) + return; + if (stop_tick) { if (test_bit(NOHZ_TICK_STOPPED, nohz_flags(cpu))) return; @@ -4914,6 +4929,18 @@ void select_nohz_load_balancer(int stop_tick) } return; } + +static int __cpuinit sched_ilb_notifier(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + switch (action & ~CPU_TASKS_FROZEN) { + case CPU_DYING: + clear_nohz_tick_stopped(smp_processor_id()); + return NOTIFY_OK; + default: + return NOTIFY_DONE; + } +} #endif static DEFINE_SPINLOCK(balancing); @@ -5070,11 +5097,7 @@ static inline int nohz_kick_needed(struct rq *rq, int cpu) * busy tick after returning from idle, we will update the busy stats. */ set_cpu_sd_state_busy(); - if (unlikely(test_bit(NOHZ_TICK_STOPPED, nohz_flags(cpu)))) { - clear_bit(NOHZ_TICK_STOPPED, nohz_flags(cpu)); - cpumask_clear_cpu(cpu, nohz.idle_cpus_mask); - atomic_dec(&nohz.nr_cpus); - } + clear_nohz_tick_stopped(cpu); /* * None are in tickless mode and hence no need for NOHZ idle load @@ -5590,6 +5613,7 @@ __init void init_sched_fair_class(void) #ifdef CONFIG_NO_HZ zalloc_cpumask_var(&nohz.idle_cpus_mask, GFP_NOWAIT); + cpu_notifier(sched_ilb_notifier, 0); #endif #endif /* SMP */ -- GitLab From 40206dd98f066d596d4280558fc5f798165861c7 Mon Sep 17 00:00:00 2001 From: Wei Liu Date: Thu, 26 Jan 2012 07:23:23 +0000 Subject: [PATCH 0268/1359] xen-netfront: correct MAX_TX_TARGET calculation. Signed-off-by: Wei Liu Signed-off-by: David S. Miller --- drivers/net/xen-netfront.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index fa679057630f..698b905058dd 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -68,7 +68,7 @@ struct netfront_cb { #define NET_TX_RING_SIZE __CONST_RING_SIZE(xen_netif_tx, PAGE_SIZE) #define NET_RX_RING_SIZE __CONST_RING_SIZE(xen_netif_rx, PAGE_SIZE) -#define TX_MAX_TARGET min_t(int, NET_RX_RING_SIZE, 256) +#define TX_MAX_TARGET min_t(int, NET_TX_RING_SIZE, 256) struct netfront_stats { u64 rx_packets; -- GitLab From 77231abe55433aa17eca712718745275853fa66d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 20 Jan 2012 12:19:43 +0000 Subject: [PATCH 0269/1359] ASoC: wm_hubs: Enable line out VMID buffer for single ended line outputs For optimal performance the single ended line outputs require that the line output VMID buffer be enabled. Signed-off-by: Mark Brown Cc: stable@vger.kernel.org --- sound/soc/codecs/wm_hubs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/sound/soc/codecs/wm_hubs.c b/sound/soc/codecs/wm_hubs.c index 2a61094075f8..9ccc416d8cbc 100644 --- a/sound/soc/codecs/wm_hubs.c +++ b/sound/soc/codecs/wm_hubs.c @@ -613,6 +613,8 @@ SND_SOC_DAPM_INPUT("IN2RP:VXRP"), SND_SOC_DAPM_SUPPLY("MICBIAS2", WM8993_POWER_MANAGEMENT_1, 5, 0, NULL, 0), SND_SOC_DAPM_SUPPLY("MICBIAS1", WM8993_POWER_MANAGEMENT_1, 4, 0, NULL, 0), +SND_SOC_DAPM_SUPPLY("LINEOUT_VMID_BUF", WM8993_ANTIPOP1, 7, 0, NULL, 0), + SND_SOC_DAPM_MIXER("IN1L PGA", WM8993_POWER_MANAGEMENT_2, 6, 0, in1l_pga, ARRAY_SIZE(in1l_pga)), SND_SOC_DAPM_MIXER("IN1R PGA", WM8993_POWER_MANAGEMENT_2, 4, 0, @@ -834,9 +836,11 @@ static const struct snd_soc_dapm_route lineout1_diff_routes[] = { }; static const struct snd_soc_dapm_route lineout1_se_routes[] = { + { "LINEOUT1N Mixer", NULL, "LINEOUT_VMID_BUF" }, { "LINEOUT1N Mixer", "Left Output Switch", "Left Output PGA" }, { "LINEOUT1N Mixer", "Right Output Switch", "Right Output PGA" }, + { "LINEOUT1P Mixer", NULL, "LINEOUT_VMID_BUF" }, { "LINEOUT1P Mixer", "Left Output Switch", "Left Output PGA" }, { "LINEOUT1N Driver", NULL, "LINEOUT1N Mixer" }, @@ -853,9 +857,11 @@ static const struct snd_soc_dapm_route lineout2_diff_routes[] = { }; static const struct snd_soc_dapm_route lineout2_se_routes[] = { + { "LINEOUT2N Mixer", NULL, "LINEOUT_VMID_BUF" }, { "LINEOUT2N Mixer", "Left Output Switch", "Left Output PGA" }, { "LINEOUT2N Mixer", "Right Output Switch", "Right Output PGA" }, + { "LINEOUT2P Mixer", NULL, "LINEOUT_VMID_BUF" }, { "LINEOUT2P Mixer", "Right Output Switch", "Right Output PGA" }, { "LINEOUT2N Driver", NULL, "LINEOUT2N Mixer" }, -- GitLab From 8791d63af0cf113725ae4cb8cba9492814c59a93 Mon Sep 17 00:00:00 2001 From: Jarod Wilson Date: Thu, 26 Jan 2012 12:04:11 -0300 Subject: [PATCH 0270/1359] [media] imon: don't wedge hardware after early callbacks This patch is just a minor update to one titled "imon: Input from ffdc device type ignored" from Corinna Vinschen. An earlier patch to prevent an oops when we got early callbacks also has the nasty side-effect of wedging imon hardware, as we don't acknowledge the urb. Rework the check slightly here to bypass processing the packet, as the driver isn't yet fully initialized, but still acknowlege the urb and submit a new rx_urb. Do this for both interfaces -- irrelevant for ffdc hardware, but relevant for newer hardware, though newer hardware doesn't spew the constant stream of data as soon as the hardware is initialized like the older ffdc devices, so they'd be less likely to trigger this anyway... Tested with both an ffdc device and an 0042 device. Reported-by: Corinna Vinschen Signed-off-by: Jarod Wilson CC: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab --- drivers/media/rc/imon.c | 26 ++++++++++++++++++++++---- 1 file changed, 22 insertions(+), 4 deletions(-) diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index 6ed96465137a..3f175ebe2766 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -47,7 +47,7 @@ #define MOD_AUTHOR "Jarod Wilson " #define MOD_DESC "Driver for SoundGraph iMON MultiMedia IR/Display" #define MOD_NAME "imon" -#define MOD_VERSION "0.9.3" +#define MOD_VERSION "0.9.4" #define DISPLAY_MINOR_BASE 144 #define DEVICE_NAME "lcd%d" @@ -1658,9 +1658,17 @@ static void usb_rx_callback_intf0(struct urb *urb) return; ictx = (struct imon_context *)urb->context; - if (!ictx || !ictx->dev_present_intf0) + if (!ictx) return; + /* + * if we get a callback before we're done configuring the hardware, we + * can't yet process the data, as there's nowhere to send it, but we + * still need to submit a new rx URB to avoid wedging the hardware + */ + if (!ictx->dev_present_intf0) + goto out; + switch (urb->status) { case -ENOENT: /* usbcore unlink successful! */ return; @@ -1678,6 +1686,7 @@ static void usb_rx_callback_intf0(struct urb *urb) break; } +out: usb_submit_urb(ictx->rx_urb_intf0, GFP_ATOMIC); } @@ -1690,9 +1699,17 @@ static void usb_rx_callback_intf1(struct urb *urb) return; ictx = (struct imon_context *)urb->context; - if (!ictx || !ictx->dev_present_intf1) + if (!ictx) return; + /* + * if we get a callback before we're done configuring the hardware, we + * can't yet process the data, as there's nowhere to send it, but we + * still need to submit a new rx URB to avoid wedging the hardware + */ + if (!ictx->dev_present_intf1) + goto out; + switch (urb->status) { case -ENOENT: /* usbcore unlink successful! */ return; @@ -1710,6 +1727,7 @@ static void usb_rx_callback_intf1(struct urb *urb) break; } +out: usb_submit_urb(ictx->rx_urb_intf1, GFP_ATOMIC); } @@ -2242,7 +2260,7 @@ find_endpoint_failed: mutex_unlock(&ictx->lock); usb_free_urb(rx_urb); rx_urb_alloc_failed: - dev_err(ictx->dev, "unable to initialize intf0, err %d\n", ret); + dev_err(ictx->dev, "unable to initialize intf1, err %d\n", ret); return NULL; } -- GitLab From af681cad3f79ad8f7bd6cb170b70990aeef74233 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 26 Jan 2012 11:14:42 -0800 Subject: [PATCH 0271/1359] Revert "tty: serial: OMAP: transmit FIFO threshold interrupts don't wake the chip" This reverts commit 43cf7c0bebf50d0b68aa42ae6d24cf08e3f24823 as Paul wants to redo it. Cc: Paul Walmsley Cc: Tomi Valkeinen Cc: Govindraj Raja Cc: Kevin Hilman Signed-off-by: Greg Kroah-Hartman --- arch/arm/plat-omap/include/plat/omap-serial.h | 1 - drivers/tty/serial/omap-serial.c | 51 +------------------ 2 files changed, 1 insertion(+), 51 deletions(-) diff --git a/arch/arm/plat-omap/include/plat/omap-serial.h b/arch/arm/plat-omap/include/plat/omap-serial.h index 12a64eb8c624..9ff444469f3d 100644 --- a/arch/arm/plat-omap/include/plat/omap-serial.h +++ b/arch/arm/plat-omap/include/plat/omap-serial.h @@ -131,7 +131,6 @@ struct uart_omap_port { u32 context_loss_cnt; u32 errata; u8 wakeups_enabled; - u8 max_tx_count; struct pm_qos_request pm_qos_request; u32 latency; diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index e00ac05cfdb4..ca54f038ab45 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -88,49 +88,6 @@ static inline void serial_omap_clear_fifos(struct uart_omap_port *up) serial_out(up, UART_FCR, 0); } -/** - * serial_omap_block_cpu_low_power_state - prevent MPU pwrdm from leaving ON - * @up: struct uart_omap_port * - * - * Prevent the MPU powerdomain from entering a power state lower than - * ON. (It should be sufficient to prevent it from entering INACTIVE, - * but there is presently no easy way to do this.) This works around - * a suspected silicon bug in the OMAP UART IP blocks. The UARTs should - * wake the PRCM when the transmit FIFO threshold interrupt is raised, but - * they do not. See also serial_omap_allow_cpu_low_power_state(). No - * return value. - */ -static void serial_omap_block_cpu_low_power_state(struct uart_omap_port *up) -{ -#ifdef CONFIG_CPU_IDLE - up->latency = 1; - schedule_work(&up->qos_work); -#else - up->max_tx_count = 1; -#endif -} - -/** - * serial_omap_allow_cpu_low_power_state - remove power state restriction on MPU - * @up: struct uart_omap_port * - * - * Cancel the effects of serial_omap_block_cpu_low_power_state(). - * This should allow the MPU powerdomain to enter a power state lower - * than ON, assuming the rest of the kernel is not restricting it. - * This works around a suspected silicon bug in the OMAP UART IP - * blocks. The UARTs should wake the PRCM when the transmit FIFO - * threshold interrupt is raised, but they do not. No return value. - */ -static void serial_omap_allow_cpu_low_power_state(struct uart_omap_port *up) -{ -#ifdef CONFIG_CPU_IDLE - up->latency = up->calc_latency; - schedule_work(&up->qos_work); -#else - up->max_tx_count = up->port.fifosize / 4; -#endif -} - /* * serial_omap_get_divisor - calculate divisor value * @port: uart port info @@ -206,9 +163,6 @@ static void serial_omap_stop_tx(struct uart_port *port) serial_out(up, UART_IER, up->ier); } - if (!up->use_dma) - serial_omap_allow_cpu_low_power_state(up); - pm_runtime_mark_last_busy(&up->pdev->dev); pm_runtime_put_autosuspend(&up->pdev->dev); } @@ -310,7 +264,7 @@ static void transmit_chars(struct uart_omap_port *up) serial_omap_stop_tx(&up->port); return; } - count = up->max_tx_count; + count = up->port.fifosize / 4; do { serial_out(up, UART_TX, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -343,7 +297,6 @@ static void serial_omap_start_tx(struct uart_port *port) if (!up->use_dma) { pm_runtime_get_sync(&up->pdev->dev); - serial_omap_block_cpu_low_power_state(up); serial_omap_enable_ier_thri(up); pm_runtime_mark_last_busy(&up->pdev->dev); pm_runtime_put_autosuspend(&up->pdev->dev); @@ -1468,8 +1421,6 @@ static int serial_omap_probe(struct platform_device *pdev) up->port.fifosize = 64; up->port.ops = &serial_omap_pops; - up->max_tx_count = up->port.fifosize / 4; - if (pdev->dev.of_node) up->port.line = of_alias_get_id(pdev->dev.of_node, "serial"); else -- GitLab From 8a74e9ffd97dc9de063de8c02ae32db79dd60436 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 26 Jan 2012 11:15:18 -0800 Subject: [PATCH 0272/1359] Revert "tty: serial: OMAP: ensure FIFO levels are set correctly in non-DMA mode" This reverts commit 0a697b22252c9d7208b5fb3e9fbd124dd229f1d2 as Paul wants to rework it. Cc: Paul Walmsley Cc: Tomi Valkeinen Cc: Govindraj Raja Cc: Kevin Hilman Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 35 ++++---------------------------- 1 file changed, 4 insertions(+), 31 deletions(-) diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index ca54f038ab45..1c2426931484 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -46,18 +46,6 @@ #define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/ -/* SCR register bitmasks */ -#define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7) -#define OMAP_UART_SCR_TX_TRIG_GRANU1_MASK (1 << 6) - -/* FCR register bitmasks */ -#define OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT 6 -#define OMAP_UART_FCR_RX_FIFO_TRIG_MASK (0x3 << 6) -#define OMAP_UART_FCR_TX_FIFO_TRIG_SHIFT 4 - -/* TLR register bitmasks */ -#define OMAP_UART_TLR_TX_FIFO_TRIG_DMA_SHIFT 0 - static struct uart_omap_port *ui[OMAP_MAX_HSUART_PORTS]; /* Forward declaration of functions */ @@ -706,7 +694,6 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, unsigned char efr = 0; unsigned long flags = 0; unsigned int baud, quot; - u32 tlr; switch (termios->c_cflag & CSIZE) { case CS5: @@ -824,28 +811,14 @@ serial_omap_set_termios(struct uart_port *port, struct ktermios *termios, up->mcr = serial_in(up, UART_MCR); serial_out(up, UART_MCR, up->mcr | UART_MCR_TCRTLR); /* FIFO ENABLE, DMA MODE */ - - up->scr |= OMAP_UART_SCR_TX_TRIG_GRANU1_MASK; - up->scr |= OMAP_UART_SCR_RX_TRIG_GRANU1_MASK; + serial_out(up, UART_FCR, up->fcr); + serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); if (up->use_dma) { - tlr = 0; - } else { - up->scr &= ~OMAP_UART_SCR_TX_EMPTY; - - /* Set receive FIFO threshold to 1 */ - up->fcr &= ~OMAP_UART_FCR_RX_FIFO_TRIG_MASK; - up->fcr |= (0x1 << OMAP_UART_FCR_RX_FIFO_TRIG_SHIFT); - - /* Set TX FIFO threshold to "63" (actually 1) */ - up->fcr |= (0x3 << OMAP_UART_FCR_TX_FIFO_TRIG_SHIFT); - tlr = (0xf << OMAP_UART_TLR_TX_FIFO_TRIG_DMA_SHIFT); + serial_out(up, UART_TI752_TLR, 0); + up->scr |= (UART_FCR_TRIGGER_4 | UART_FCR_TRIGGER_8); } - serial_out(up, UART_TI752_TLR, tlr); - serial_out(up, UART_FCR, up->fcr); - serial_out(up, UART_LCR, UART_LCR_CONF_MODE_B); - serial_out(up, UART_OMAP_SCR, up->scr); serial_out(up, UART_EFR, up->efr); -- GitLab From 523b82e3734908fc9eff5d48de46c83e76e51641 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 26 Jan 2012 17:45:39 +0000 Subject: [PATCH 0273/1359] serial: Kill off Moorestown code All production devices operate in the Oaktrail configuration with legacy PC elements present and an ACPI BIOS. Continue stripping out the Moorestown elements from the tree leaving Medfield. Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 9 - drivers/tty/serial/Makefile | 1 - drivers/tty/serial/max3107-aava.c | 344 ------------------------------ 3 files changed, 354 deletions(-) delete mode 100644 drivers/tty/serial/max3107-aava.c diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 0bff23897509..2de99248dfae 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -264,15 +264,6 @@ config SERIAL_MAX3107 help MAX3107 chip support -config SERIAL_MAX3107_AAVA - tristate "MAX3107 AAVA platform support" - depends on X86_MRST && SERIAL_MAX3107 && GPIOLIB - select SERIAL_CORE - help - Support for the MAX3107 chip configuration found on the AAVA - platform. Includes the extra initialisation and GPIO support - neded for this device. - config SERIAL_DZ bool "DECstation DZ serial driver" depends on MACH_DECSTATION && 32BIT diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index a6d1ac049965..fef32e10c851 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -29,7 +29,6 @@ obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o obj-$(CONFIG_SERIAL_MAX3100) += max3100.o obj-$(CONFIG_SERIAL_MAX3107) += max3107.o -obj-$(CONFIG_SERIAL_MAX3107_AAVA) += max3107-aava.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o obj-$(CONFIG_SERIAL_68328) += 68328serial.o diff --git a/drivers/tty/serial/max3107-aava.c b/drivers/tty/serial/max3107-aava.c deleted file mode 100644 index aae772a71de6..000000000000 --- a/drivers/tty/serial/max3107-aava.c +++ /dev/null @@ -1,344 +0,0 @@ -/* - * max3107.c - spi uart protocol driver for Maxim 3107 - * Based on max3100.c - * by Christian Pellegrin - * and max3110.c - * by Feng Tang - * - * Copyright (C) Aavamobile 2009 - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * - * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "max3107.h" - -/* GPIO direction to input function */ -static int max3107_gpio_direction_in(struct gpio_chip *chip, unsigned offset) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[1]; /* Buffer for SPI transfer */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO configuration register */ - buf[0] = MAX3107_GPIOCFG_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO read failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - - /* Set GPIO to input */ - buf[0] &= ~(0x0001 << offset); - - /* Write new GPIO configuration register value */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO write failed\n"); - return -EIO; - } - return 0; -} - -/* GPIO direction to output function */ -static int max3107_gpio_direction_out(struct gpio_chip *chip, unsigned offset, - int value) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[2]; /* Buffer for SPI transfers */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO configuration and data registers */ - buf[0] = MAX3107_GPIOCFG_REG; - buf[1] = MAX3107_GPIODATA_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { - dev_err(&s->spi->dev, "SPI transfer gpio failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - buf[1] &= MAX3107_SPI_RX_DATA_MASK; - - /* Set GPIO to output */ - buf[0] |= (0x0001 << offset); - /* Set value */ - if (value) - buf[1] |= (0x0001 << offset); - else - buf[1] &= ~(0x0001 << offset); - - /* Write new GPIO configuration and data register values */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIOCFG_REG); - buf[1] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 4)) { - dev_err(&s->spi->dev, - "SPI transfer for GPIO conf data w failed\n"); - return -EIO; - } - return 0; -} - -/* GPIO value query function */ -static int max3107_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[1]; /* Buffer for SPI transfer */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return -EINVAL; - } - - /* Read current GPIO data register */ - buf[0] = MAX3107_GPIODATA_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 2)) { - dev_err(&s->spi->dev, "SPI transfer GPIO data r failed\n"); - return -EIO; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - - /* Return value */ - return buf[0] & (0x0001 << offset); -} - -/* GPIO value set function */ -static void max3107_gpio_set(struct gpio_chip *chip, unsigned offset, int value) -{ - struct max3107_port *s = container_of(chip, struct max3107_port, chip); - u16 buf[2]; /* Buffer for SPI transfers */ - - if (offset >= MAX3107_GPIO_COUNT) { - dev_err(&s->spi->dev, "Invalid GPIO\n"); - return; - } - - /* Read current GPIO configuration registers*/ - buf[0] = MAX3107_GPIODATA_REG; - buf[1] = MAX3107_GPIOCFG_REG; - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, (u8 *)buf, 4)) { - dev_err(&s->spi->dev, - "SPI transfer for GPIO data and config read failed\n"); - return; - } - buf[0] &= MAX3107_SPI_RX_DATA_MASK; - buf[1] &= MAX3107_SPI_RX_DATA_MASK; - - if (!(buf[1] & (0x0001 << offset))) { - /* Configured as input, can't set value */ - dev_warn(&s->spi->dev, - "Trying to set value for input GPIO\n"); - return; - } - - /* Set value */ - if (value) - buf[0] |= (0x0001 << offset); - else - buf[0] &= ~(0x0001 << offset); - - /* Write new GPIO data register value */ - buf[0] |= (MAX3107_WRITE_BIT | MAX3107_GPIODATA_REG); - /* Perform SPI transfer */ - if (max3107_rw(s, (u8 *)buf, NULL, 2)) - dev_err(&s->spi->dev, "SPI transfer GPIO data w failed\n"); -} - -/* GPIO chip data */ -static struct gpio_chip max3107_gpio_chip = { - .owner = THIS_MODULE, - .direction_input = max3107_gpio_direction_in, - .direction_output = max3107_gpio_direction_out, - .get = max3107_gpio_get, - .set = max3107_gpio_set, - .can_sleep = 1, - .base = MAX3107_GPIO_BASE, - .ngpio = MAX3107_GPIO_COUNT, -}; - -/** - * max3107_aava_reset - reset on AAVA systems - * @spi: The SPI device we are probing - * - * Reset the device ready for probing. - */ - -static int max3107_aava_reset(struct spi_device *spi) -{ - /* Reset the chip */ - if (gpio_request(MAX3107_RESET_GPIO, "max3107")) { - pr_err("Requesting RESET GPIO failed\n"); - return -EIO; - } - if (gpio_direction_output(MAX3107_RESET_GPIO, 0)) { - pr_err("Setting RESET GPIO to 0 failed\n"); - gpio_free(MAX3107_RESET_GPIO); - return -EIO; - } - msleep(MAX3107_RESET_DELAY); - if (gpio_direction_output(MAX3107_RESET_GPIO, 1)) { - pr_err("Setting RESET GPIO to 1 failed\n"); - gpio_free(MAX3107_RESET_GPIO); - return -EIO; - } - gpio_free(MAX3107_RESET_GPIO); - msleep(MAX3107_WAKEUP_DELAY); - return 0; -} - -static int max3107_aava_configure(struct max3107_port *s) -{ - int retval; - - /* Initialize GPIO chip data */ - s->chip = max3107_gpio_chip; - s->chip.label = s->spi->modalias; - s->chip.dev = &s->spi->dev; - - /* Add GPIO chip */ - retval = gpiochip_add(&s->chip); - if (retval) { - dev_err(&s->spi->dev, "Adding GPIO chip failed\n"); - return retval; - } - - /* Temporary fix for EV2 boot problems, set modem reset to 0 */ - max3107_gpio_direction_out(&s->chip, 3, 0); - return 0; -} - -#if 0 -/* This will get enabled once we have the board stuff merged for this - specific case */ - -static const struct baud_table brg13_ext[] = { - { 300, MAX3107_BRG13_B300 }, - { 600, MAX3107_BRG13_B600 }, - { 1200, MAX3107_BRG13_B1200 }, - { 2400, MAX3107_BRG13_B2400 }, - { 4800, MAX3107_BRG13_B4800 }, - { 9600, MAX3107_BRG13_B9600 }, - { 19200, MAX3107_BRG13_B19200 }, - { 57600, MAX3107_BRG13_B57600 }, - { 115200, MAX3107_BRG13_B115200 }, - { 230400, MAX3107_BRG13_B230400 }, - { 460800, MAX3107_BRG13_B460800 }, - { 921600, MAX3107_BRG13_B921600 }, - { 0, 0 } -}; - -static void max3107_aava_init(struct max3107_port *s) -{ - /*override for AAVA SC specific*/ - if (mrst_platform_id() == MRST_PLATFORM_AAVA_SC) { - if (get_koski_build_id() <= KOSKI_EV2) - if (s->ext_clk) { - s->brg_cfg = MAX3107_BRG13_B9600; - s->baud_tbl = (struct baud_table *)brg13_ext; - } - } -} -#endif - -static int __devexit max3107_aava_remove(struct spi_device *spi) -{ - struct max3107_port *s = dev_get_drvdata(&spi->dev); - - /* Remove GPIO chip */ - if (gpiochip_remove(&s->chip)) - dev_warn(&spi->dev, "Removing GPIO chip failed\n"); - - /* Then do the default remove */ - return max3107_remove(spi); -} - -/* Platform data */ -static struct max3107_plat aava_plat_data = { - .loopback = 0, - .ext_clk = 1, -/* .init = max3107_aava_init, */ - .configure = max3107_aava_configure, - .hw_suspend = max3107_hw_susp, - .polled_mode = 0, - .poll_time = 0, -}; - - -static int __devinit max3107_probe_aava(struct spi_device *spi) -{ - int err = max3107_aava_reset(spi); - if (err < 0) - return err; - return max3107_probe(spi, &aava_plat_data); -} - -/* Spi driver data */ -static struct spi_driver max3107_driver = { - .driver = { - .name = "aava-max3107", - .owner = THIS_MODULE, - }, - .probe = max3107_probe_aava, - .remove = __devexit_p(max3107_aava_remove), - .suspend = max3107_suspend, - .resume = max3107_resume, -}; - -/* Driver init function */ -static int __init max3107_init(void) -{ - return spi_register_driver(&max3107_driver); -} - -/* Driver exit function */ -static void __exit max3107_exit(void) -{ - spi_unregister_driver(&max3107_driver); -} - -module_init(max3107_init); -module_exit(max3107_exit); - -MODULE_DESCRIPTION("MAX3107 driver"); -MODULE_AUTHOR("Aavamobile"); -MODULE_ALIAS("spi:aava-max3107"); -MODULE_LICENSE("GPL v2"); -- GitLab From 2353f806c97020d4c7709f15eebb49b591f7306d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 26 Jan 2012 17:41:34 +0000 Subject: [PATCH 0274/1359] USB: ftdi_sio: Add more identifiers 0x04d8, 0x000a: Hornby Elite Signed-off-by: Alan Cox Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 7 insertions(+) diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 104aff536b1e..ad654f8208ef 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -797,6 +797,7 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(HORNBY_VID, HORNBY_ELITE_PID) }, { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 09237ffe2f33..f994503df2dd 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -531,6 +531,12 @@ #define ADI_GNICE_PID 0xF000 #define ADI_GNICEPLUS_PID 0xF001 +/* + * Hornby Elite + */ +#define HORNBY_VID 0x04D8 +#define HORNBY_ELITE_PID 0x000A + /* * RATOC REX-USB60F */ -- GitLab From b3ef051db763b640d1ff724b616ffba940896b44 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Thu, 26 Jan 2012 12:29:42 +0100 Subject: [PATCH 0275/1359] USB: Realtek cr: fix autopm scheduling while atomic Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=784345 Reported-by: Francis Moreau Reported-and-tested-by: Christian D Reported-and-tested-by: Jimmy Dorff Reported-and-tested-by: collura@ieee.org Cc: stable@vger.kernel.org # 3.2+ Signed-off-by: Stanislaw Gruszka Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/realtek_cr.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 1f62723ef1a8..d32f72061c09 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -789,7 +789,7 @@ static void rts51x_suspend_timer_fn(unsigned long data) rts51x_set_stat(chip, RTS51X_STAT_SS); /* ignore mass storage interface's children */ pm_suspend_ignore_children(&us->pusb_intf->dev, true); - usb_autopm_put_interface(us->pusb_intf); + usb_autopm_put_interface_async(us->pusb_intf); US_DEBUGP("%s: RTS51X_STAT_SS 01," "intf->pm_usage_cnt:%d, power.usage:%d\n", __func__, -- GitLab From a0701f04846eee9976e6b3eafca09f2a9d2744ef Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 25 Jan 2012 13:52:12 -0800 Subject: [PATCH 0276/1359] uwb & wusb: fix kconfig error Fix UWB/WUSB kconfig error by changing 'select' to 'depends on'. drivers/usb/wusbcore/Kconfig:4:error: recursive dependency detected! drivers/usb/wusbcore/Kconfig:4: symbol USB_WUSB is selected by USB_HWA_HCD drivers/usb/host/Kconfig:559: symbol USB_HWA_HCD depends on UWB drivers/uwb/Kconfig:5: symbol UWB is selected by USB_WUSB Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/usb/wusbcore/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/usb/wusbcore/Kconfig b/drivers/usb/wusbcore/Kconfig index 0ead8826ec79..f29fdd7f6d75 100644 --- a/drivers/usb/wusbcore/Kconfig +++ b/drivers/usb/wusbcore/Kconfig @@ -6,7 +6,7 @@ config USB_WUSB depends on EXPERIMENTAL depends on USB depends on PCI - select UWB + depends on UWB select CRYPTO select CRYPTO_BLKCIPHER select CRYPTO_CBC -- GitLab From b1375d64c539c5b76794be759b62d3f178e67c32 Mon Sep 17 00:00:00 2001 From: Jan Schmidt Date: Thu, 26 Jan 2012 15:01:11 -0500 Subject: [PATCH 0277/1359] Btrfs: fix uninit warning in backref.c Added initialization with the declaration of ret. It isn't set later on the switch-default branch (which should never be taken). Signed-off-by: Jan Schmidt Signed-off-by: Chris Mason --- fs/btrfs/backref.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/backref.c b/fs/btrfs/backref.c index b9a843226de8..633c701a287d 100644 --- a/fs/btrfs/backref.c +++ b/fs/btrfs/backref.c @@ -297,7 +297,7 @@ static int __add_delayed_refs(struct btrfs_delayed_ref_head *head, u64 seq, struct btrfs_delayed_extent_op *extent_op = head->extent_op; struct rb_node *n = &head->node.rb_node; int sgn; - int ret; + int ret = 0; if (extent_op && extent_op->update_key) btrfs_disk_key_to_cpu(info_key, &extent_op->key); @@ -392,7 +392,7 @@ static int __add_inline_refs(struct btrfs_fs_info *fs_info, struct btrfs_key *info_key, int *info_level, struct list_head *prefs) { - int ret; + int ret = 0; int slot; struct extent_buffer *leaf; struct btrfs_key key; -- GitLab From 357b9784b79924a31ccded5d9a0c688f48cc28f2 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 26 Jan 2012 15:01:11 -0500 Subject: [PATCH 0278/1359] Btrfs: make sure a bitmap has enough bytes We have only been checking for min_bytes available in bitmap entries, but we won't successfully setup a bitmap cluster unless it has at least bytes in the bitmap, so in the common case min_bytes is 4k and we want something like 2MB, so if there are a bunch of bitmap entries with less than 2mb's in them, we'll search all them anyway, which is suboptimal. Fix this check. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/free-space-cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index efe20032e4a1..6e7406932341 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -2475,7 +2475,7 @@ setup_cluster_bitmap(struct btrfs_block_group_cache *block_group, } list_for_each_entry(entry, bitmaps, list) { - if (entry->bytes < min_bytes) + if (entry->bytes < bytes) continue; ret = btrfs_bitmap_cluster(block_group, entry, cluster, offset, bytes, cont1_bytes, min_bytes); -- GitLab From 6dd70ce4eb7429c2ba6dd9fa46f78a0a2a254038 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Thu, 26 Jan 2012 15:01:11 -0500 Subject: [PATCH 0279/1359] btrfs: Fix busyloops in transaction waiting code wait_log_commit() and wait_for_writer() were using slightly different conditions for deciding whether they should call schedule() and whether they should continue in the wait loop. Thus it could happen that we busylooped when the first condition was not true while the second one was. That is burning CPU cycles needlessly and is deadly on UP machines... Signed-off-by: Jan Kara Signed-off-by: Chris Mason --- fs/btrfs/tree-log.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c index cb877e0886a7..966cc74f5d6c 100644 --- a/fs/btrfs/tree-log.c +++ b/fs/btrfs/tree-log.c @@ -1957,7 +1957,8 @@ static int wait_log_commit(struct btrfs_trans_handle *trans, finish_wait(&root->log_commit_wait[index], &wait); mutex_lock(&root->log_mutex); - } while (root->log_transid < transid + 2 && + } while (root->fs_info->last_trans_log_full_commit != + trans->transid && root->log_transid < transid + 2 && atomic_read(&root->log_commit[index])); return 0; } @@ -1966,7 +1967,8 @@ static int wait_for_writer(struct btrfs_trans_handle *trans, struct btrfs_root *root) { DEFINE_WAIT(wait); - while (atomic_read(&root->log_writers)) { + while (root->fs_info->last_trans_log_full_commit != + trans->transid && atomic_read(&root->log_writers)) { prepare_to_wait(&root->log_writer_wait, &wait, TASK_UNINTERRUPTIBLE); mutex_unlock(&root->log_mutex); -- GitLab From 8bedd51b6121c4607784d75f852828d25d119c52 Mon Sep 17 00:00:00 2001 From: Mitch Harder Date: Thu, 26 Jan 2012 15:01:11 -0500 Subject: [PATCH 0280/1359] Btrfs: Check for NULL page in extent_range_uptodate A user has encountered a NULL pointer kernel oops in btrfs when encountering media errors. The problem has been identified as an unhandled NULL pointer returned from find_get_page(). This modification simply checks for a NULL page, and returns with an error if found (the extent_range_uptodate() function returns 1 on errors). After testing this patch, the user reported that the error with the NULL pointer oops was solved. However, there is still a remaining problem with a thread becoming stuck in wait_on_page_locked(page) in the read_extent_buffer_pages(...) function in extent_io.c for (i = start_i; i < num_pages; i++) { page = extent_buffer_page(eb, i); wait_on_page_locked(page); if (!PageUptodate(page)) ret = -EIO; } This patch leaves the issue with the locked page yet to be resolved. Signed-off-by: Mitch Harder Signed-off-by: Chris Mason --- fs/btrfs/extent_io.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/btrfs/extent_io.c b/fs/btrfs/extent_io.c index 9d09a4f81875..fcf77e1ded40 100644 --- a/fs/btrfs/extent_io.c +++ b/fs/btrfs/extent_io.c @@ -3909,6 +3909,8 @@ int extent_range_uptodate(struct extent_io_tree *tree, while (start <= end) { index = start >> PAGE_CACHE_SHIFT; page = find_get_page(tree->mapping, index); + if (!page) + return 1; uptodate = PageUptodate(page); page_cache_release(page); if (!uptodate) { -- GitLab From 0b4a9d248f88e6773312f262e8185f23863d984a Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 26 Jan 2012 15:01:11 -0500 Subject: [PATCH 0281/1359] Btrfs: use cluster->window_start when allocating from a cluster bitmap We specifically set window_start in the cluster struct to indicate where the cluster starts in a bitmap, but we've been using min_start to indicate where we're searching from. This is usually the start of the blockgroup, so essentially means we're constantly searching from the start of any bitmap we find, which completely negates all the trouble we go to in order to setup a cluster. So start using window_start to make sure we actually use the area we found. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/free-space-cache.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 6e7406932341..61447a51f645 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -2242,7 +2242,7 @@ u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group, if (entry->bitmap) { ret = btrfs_alloc_from_bitmap(block_group, cluster, entry, bytes, - min_start); + cluster->window_start); if (ret == 0) { node = rb_next(&entry->offset_index); if (!node) -- GitLab From 0b485143d835c019cddc45f46e4b3873dcc9aa4e Mon Sep 17 00:00:00 2001 From: Stefan Behrens Date: Thu, 26 Jan 2012 15:01:11 -0500 Subject: [PATCH 0282/1359] Btrfs: fix warning for 32-bit build of fs/btrfs/check-integrity.c There have been 4 warnings on 32-bit build, they are herewith fixed. Signed-off-by: Stefan Behrens Signed-off-by: Chris Mason --- fs/btrfs/check-integrity.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/fs/btrfs/check-integrity.c b/fs/btrfs/check-integrity.c index ad0b3ba735b7..b669a7d8e499 100644 --- a/fs/btrfs/check-integrity.c +++ b/fs/btrfs/check-integrity.c @@ -1662,7 +1662,7 @@ static void btrfsic_process_written_block(struct btrfsic_dev_state *dev_state, block = btrfsic_block_hashtable_lookup(bdev, dev_bytenr, &state->block_hashtable); if (NULL != block) { - u64 bytenr; + u64 bytenr = 0; struct list_head *elem_ref_to; struct list_head *tmp_ref_to; @@ -2777,9 +2777,10 @@ int btrfsic_submit_bh(int rw, struct buffer_head *bh) printk(KERN_INFO "submit_bh(rw=0x%x, blocknr=%lu (bytenr %llu)," " size=%lu, data=%p, bdev=%p)\n", - rw, bh->b_blocknr, - (unsigned long long)dev_bytenr, bh->b_size, - bh->b_data, bh->b_bdev); + rw, (unsigned long)bh->b_blocknr, + (unsigned long long)dev_bytenr, + (unsigned long)bh->b_size, bh->b_data, + bh->b_bdev); btrfsic_process_written_block(dev_state, dev_bytenr, bh->b_data, bh->b_size, NULL, NULL, bh, rw); @@ -2844,7 +2845,7 @@ void btrfsic_submit_bio(int rw, struct bio *bio) printk(KERN_INFO "submit_bio(rw=0x%x, bi_vcnt=%u," " bi_sector=%lu (bytenr %llu), bi_bdev=%p)\n", - rw, bio->bi_vcnt, bio->bi_sector, + rw, bio->bi_vcnt, (unsigned long)bio->bi_sector, (unsigned long long)dev_bytenr, bio->bi_bdev); -- GitLab From 7ec31b548a17f773ab6289e795ed3a6820e8b56e Mon Sep 17 00:00:00 2001 From: Liu Bo Date: Thu, 26 Jan 2012 15:01:12 -0500 Subject: [PATCH 0283/1359] Btrfs: do not defrag a file partially xfstests 218 complains that btrfs defrags a file partially: After: 1 Write backwards sync, but contiguous - should defrag to 1 extent Before: 10 -After: 1 +After: 2 To fix this, we need to set max_to_defrag count properly. Signed-off-by: Liu Bo Signed-off-by: Chris Mason --- fs/btrfs/ioctl.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 6834be4c8709..0b06a5ca8afc 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -1066,7 +1066,7 @@ int btrfs_defrag_file(struct inode *inode, struct file *file, i = range->start >> PAGE_CACHE_SHIFT; } if (!max_to_defrag) - max_to_defrag = last_index; + max_to_defrag = last_index + 1; /* * make writeback starts from i, so the defrag range can be -- GitLab From 9e622d6bea0202e9fe267955362c01918562c09b Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Thu, 26 Jan 2012 15:01:12 -0500 Subject: [PATCH 0284/1359] Btrfs: fix enospc error caused by wrong checks of the chunk When we did sysbench test for inline files, enospc error happened easily though there was lots of free disk space which could be allocated for new chunks. Reproduce steps: # mkfs.btrfs -b $((2 * 1024 * 1024 * 1024)) # mount /mnt # ulimit -n 102400 # cd /mnt # sysbench --num-threads=1 --test=fileio --file-num=81920 \ > --file-total-size=80M --file-block-size=1K --file-io-mode=sync \ > --file-test-mode=seqwr prepare # sysbench --num-threads=1 --test=fileio --file-num=81920 \ > --file-total-size=80M --file-block-size=1K --file-io-mode=sync \ > --file-test-mode=seqwr run The reason of this bug is: Now, we can reserve space which is larger than the free space in the chunks if we have enough free disk space which can be used for new chunks. By this way, the space allocator should allocate a new chunk by force if there is no free space in the free space cache. But there are two wrong checks which break this operation. One is if (ret == -ENOSPC && num_bytes > min_alloc_size) in btrfs_reserve_extent(), it is wrong, we should try to allocate a new chunk even we fail to allocate free space by minimum allocable size. The other is if (space_info->force_alloc) force = space_info->force_alloc; in do_chunk_alloc(). It makes the allocator ignore CHUNK_ALLOC_FORCE If someone sets ->force_alloc to CHUNK_ALLOC_LIMITED, and makes the enospc error happen. Fix these two wrong checks. Especially the second one, we fix it by changing the value of CHUNK_ALLOC_LIMITED and CHUNK_ALLOC_FORCE, and make CHUNK_ALLOC_FORCE greater than CHUNK_ALLOC_LIMITED since CHUNK_ALLOC_FORCE has higher priority. And if the value which is passed in by the caller is greater than ->force_alloc, use the passed value. Signed-off-by: Miao Xie Signed-off-by: Chris Mason --- fs/btrfs/extent-tree.c | 49 +++++++++++++++++++++++------------------- 1 file changed, 27 insertions(+), 22 deletions(-) diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c index 700879ed64cf..283af7a676a3 100644 --- a/fs/btrfs/extent-tree.c +++ b/fs/btrfs/extent-tree.c @@ -34,23 +34,24 @@ #include "locking.h" #include "free-space-cache.h" -/* control flags for do_chunk_alloc's force field +/* + * control flags for do_chunk_alloc's force field * CHUNK_ALLOC_NO_FORCE means to only allocate a chunk * if we really need one. * - * CHUNK_ALLOC_FORCE means it must try to allocate one - * * CHUNK_ALLOC_LIMITED means to only try and allocate one * if we have very few chunks already allocated. This is * used as part of the clustering code to help make sure * we have a good pool of storage to cluster in, without * filling the FS with empty chunks * + * CHUNK_ALLOC_FORCE means it must try to allocate one + * */ enum { CHUNK_ALLOC_NO_FORCE = 0, - CHUNK_ALLOC_FORCE = 1, - CHUNK_ALLOC_LIMITED = 2, + CHUNK_ALLOC_LIMITED = 1, + CHUNK_ALLOC_FORCE = 2, }; /* @@ -3414,7 +3415,7 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans, again: spin_lock(&space_info->lock); - if (space_info->force_alloc) + if (force < space_info->force_alloc) force = space_info->force_alloc; if (space_info->full) { spin_unlock(&space_info->lock); @@ -5794,6 +5795,7 @@ int btrfs_reserve_extent(struct btrfs_trans_handle *trans, u64 search_end, struct btrfs_key *ins, u64 data) { + bool final_tried = false; int ret; u64 search_start = 0; @@ -5813,22 +5815,25 @@ again: search_start, search_end, hint_byte, ins, data); - if (ret == -ENOSPC && num_bytes > min_alloc_size) { - num_bytes = num_bytes >> 1; - num_bytes = num_bytes & ~(root->sectorsize - 1); - num_bytes = max(num_bytes, min_alloc_size); - do_chunk_alloc(trans, root->fs_info->extent_root, - num_bytes, data, CHUNK_ALLOC_FORCE); - goto again; - } - if (ret == -ENOSPC && btrfs_test_opt(root, ENOSPC_DEBUG)) { - struct btrfs_space_info *sinfo; - - sinfo = __find_space_info(root->fs_info, data); - printk(KERN_ERR "btrfs allocation failed flags %llu, " - "wanted %llu\n", (unsigned long long)data, - (unsigned long long)num_bytes); - dump_space_info(sinfo, num_bytes, 1); + if (ret == -ENOSPC) { + if (!final_tried) { + num_bytes = num_bytes >> 1; + num_bytes = num_bytes & ~(root->sectorsize - 1); + num_bytes = max(num_bytes, min_alloc_size); + do_chunk_alloc(trans, root->fs_info->extent_root, + num_bytes, data, CHUNK_ALLOC_FORCE); + if (num_bytes == min_alloc_size) + final_tried = true; + goto again; + } else if (btrfs_test_opt(root, ENOSPC_DEBUG)) { + struct btrfs_space_info *sinfo; + + sinfo = __find_space_info(root->fs_info, data); + printk(KERN_ERR "btrfs allocation failed flags %llu, " + "wanted %llu\n", (unsigned long long)data, + (unsigned long long)num_bytes); + dump_space_info(sinfo, num_bytes, 1); + } } trace_btrfs_reserved_extent_alloc(root, ins->objectid, ins->offset); -- GitLab From 0c4e538bccc106872d31b1514570b4dac95fb7f2 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Thu, 26 Jan 2012 15:01:12 -0500 Subject: [PATCH 0285/1359] btrfs: mask out gfp flags in releasepage btree_releasepage is a callback and can be passed unknown gfp flags and then they may end up in kmem_cache_alloc called from alloc_extent_state, slab allocator will BUG_ON when there is HIGHMEM or DMA32 flag set. This may happen when btrfs is mounted from a loop device, which masks out __GFP_IO flag. The check in try_release_extent_state 3399 if ((mask & GFP_NOFS) == GFP_NOFS) 3400 mask = GFP_NOFS; will not work and passes unfiltered flags further resulting in crash at mm/slab.c:2963 [<000000000024ae4c>] cache_alloc_refill+0x3b4/0x5c8 [<000000000024c810>] kmem_cache_alloc+0x204/0x294 [<00000000001fd3c2>] mempool_alloc+0x52/0x170 [<000003c000ced0b0>] alloc_extent_state+0x40/0xd4 [btrfs] [<000003c000cee5ae>] __clear_extent_bit+0x38a/0x4cc [btrfs] [<000003c000cee78c>] try_release_extent_state+0x9c/0xd4 [btrfs] [<000003c000cc4c66>] btree_releasepage+0x7e/0xd0 [btrfs] [<0000000000210d84>] shrink_page_list+0x6a0/0x724 [<0000000000211394>] shrink_inactive_list+0x230/0x578 [<0000000000211bb8>] shrink_list+0x6c/0x120 [<0000000000211e4e>] shrink_zone+0x1e2/0x228 [<0000000000211f24>] shrink_zones+0x90/0x254 [<0000000000213410>] do_try_to_free_pages+0xac/0x420 [<0000000000213ae0>] try_to_free_pages+0x13c/0x1b0 [<0000000000204e6c>] __alloc_pages_nodemask+0x5b4/0x9a8 [<00000000001fb04a>] grab_cache_page_write_begin+0x7e/0xe8 Signed-off-by: David Sterba Signed-off-by: Chris Mason --- fs/btrfs/disk-io.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c index da4457f84d78..4c867112b4c8 100644 --- a/fs/btrfs/disk-io.c +++ b/fs/btrfs/disk-io.c @@ -961,6 +961,13 @@ static int btree_releasepage(struct page *page, gfp_t gfp_flags) tree = &BTRFS_I(page->mapping->host)->io_tree; map = &BTRFS_I(page->mapping->host)->extent_tree; + /* + * We need to mask out eg. __GFP_HIGHMEM and __GFP_DMA32 as we're doing + * slab allocation from alloc_extent_state down the callchain where + * it'd hit a BUG_ON as those flags are not allowed. + */ + gfp_flags &= ~GFP_SLAB_BUG_MASK; + ret = try_release_extent_state(map, tree, page, gfp_flags); if (!ret) return 0; -- GitLab From 9b23062840e7c685ef0a0b561285d6e3a3b6811b Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 26 Jan 2012 15:01:12 -0500 Subject: [PATCH 0286/1359] Btrfs: advance window_start if we're using a bitmap If we span a long area in a bitmap we could end up taking a lot of time searching to the next free area if we're searching from the original window_start, so advance window_start in order to make sure we don't do any superficial searching. Thanks, Signed-off-by: Josef Bacik Signed-off-by: Chris Mason --- fs/btrfs/free-space-cache.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c index 61447a51f645..5802b1473c3d 100644 --- a/fs/btrfs/free-space-cache.c +++ b/fs/btrfs/free-space-cache.c @@ -2251,6 +2251,7 @@ u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group, offset_index); continue; } + cluster->window_start += bytes; } else { ret = entry->offset; -- GitLab From fc395b9291925b1880e0afc61274fe2f6ddc1269 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 26 Jan 2012 15:47:37 +0000 Subject: [PATCH 0287/1359] x86: Properly parenthesize cmpxchg() macro arguments Quite oddly, all of the arguments passed through from the top level macros to the second level which didn't need parentheses had them, while the only expression (involving a parameter) needing them didn't. Very recently I got bitten by the lack thereof when using something like "array + index" for the first operand, with "array" being an array more narrow than int. Signed-off-by: Jan Beulich Cc: Linus Torvalds Link: http://lkml.kernel.org/r/4F2183A9020000780006F3E6@nat28.tlf.novell.com Signed-off-by: Ingo Molnar --- arch/x86/include/asm/cmpxchg.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/x86/include/asm/cmpxchg.h b/arch/x86/include/asm/cmpxchg.h index 0c9fa2745f13..b3b733262909 100644 --- a/arch/x86/include/asm/cmpxchg.h +++ b/arch/x86/include/asm/cmpxchg.h @@ -145,13 +145,13 @@ extern void __add_wrong_size(void) #ifdef __HAVE_ARCH_CMPXCHG #define cmpxchg(ptr, old, new) \ - __cmpxchg((ptr), (old), (new), sizeof(*ptr)) + __cmpxchg(ptr, old, new, sizeof(*(ptr))) #define sync_cmpxchg(ptr, old, new) \ - __sync_cmpxchg((ptr), (old), (new), sizeof(*ptr)) + __sync_cmpxchg(ptr, old, new, sizeof(*(ptr))) #define cmpxchg_local(ptr, old, new) \ - __cmpxchg_local((ptr), (old), (new), sizeof(*ptr)) + __cmpxchg_local(ptr, old, new, sizeof(*(ptr))) #endif /* -- GitLab From b0f4c4b32c8e3aa0d44fc4dd6c40a9a9a8d66b63 Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Thu, 26 Jan 2012 08:55:34 -0500 Subject: [PATCH 0288/1359] bugs, x86: Fix printk levels for panic, softlockups and stack dumps rsyslog will display KERN_EMERG messages on a connected terminal. However, these messages are useless/undecipherable for a general user. For example, after a softlockup we get: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Stack: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Call Trace: Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ... kernel:Code: ff ff a8 08 75 25 31 d2 48 8d 86 38 e0 ff ff 48 89 d1 0f 01 c8 0f ae f0 48 8b 86 38 e0 ff ff a8 08 75 08 b1 01 4c 89 e0 0f 01 c9 ea 69 dd ff 4c 29 e8 48 89 c7 e8 0f bc da ff 49 89 c4 49 89 This happens because the printk levels for these messages are incorrect. Only an informational message should be displayed on a terminal. I modified the printk levels for various messages in the kernel and tested the output by using the drivers/misc/lkdtm.c kernel modules (ie, softlockups, panics, hard lockups, etc.) and confirmed that the console output was still the same and that the output to the terminals was correct. For example, in the case of a softlockup we now see the much more informative: Message from syslogd@intel-s3e37-04 at Jan 25 10:18:06 ... BUG: soft lockup - CPU4 stuck for 60s! instead of the above confusing messages. AFAICT, the messages no longer have to be KERN_EMERG. In the most important case of a panic we set console_verbose(). As for the other less severe cases the correct data is output to the console and /var/log/messages. Successfully tested by me using the drivers/misc/lkdtm.c module. Signed-off-by: Prarit Bhargava Cc: dzickus@redhat.com Cc: Linus Torvalds Cc: Andrew Morton Link: http://lkml.kernel.org/r/1327586134-11926-1-git-send-email-prarit@redhat.com Signed-off-by: Ingo Molnar --- arch/x86/kernel/dumpstack.c | 3 ++- arch/x86/kernel/dumpstack_64.c | 6 +++--- arch/x86/mm/fault.c | 4 ++-- kernel/watchdog.c | 2 +- lib/bug.c | 2 +- 5 files changed, 9 insertions(+), 8 deletions(-) diff --git a/arch/x86/kernel/dumpstack.c b/arch/x86/kernel/dumpstack.c index 1aae78f775fc..4025fe4f928f 100644 --- a/arch/x86/kernel/dumpstack.c +++ b/arch/x86/kernel/dumpstack.c @@ -252,7 +252,8 @@ int __kprobes __die(const char *str, struct pt_regs *regs, long err) unsigned short ss; unsigned long sp; #endif - printk(KERN_EMERG "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter); + printk(KERN_DEFAULT + "%s: %04lx [#%d] ", str, err & 0xffff, ++die_counter); #ifdef CONFIG_PREEMPT printk("PREEMPT "); #endif diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index 6d728d9284bd..42b2bca0b72c 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -269,11 +269,11 @@ void show_registers(struct pt_regs *regs) unsigned char c; u8 *ip; - printk(KERN_EMERG "Stack:\n"); + printk(KERN_DEFAULT "Stack:\n"); show_stack_log_lvl(NULL, regs, (unsigned long *)sp, - 0, KERN_EMERG); + 0, KERN_DEFAULT); - printk(KERN_EMERG "Code: "); + printk(KERN_DEFAULT "Code: "); ip = (u8 *)regs->ip - code_prologue; if (ip < (u8 *)PAGE_OFFSET || probe_kernel_address(ip, c)) { diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 9d74824a708d..f0b4caf85c1a 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -673,7 +673,7 @@ no_context(struct pt_regs *regs, unsigned long error_code, stackend = end_of_stack(tsk); if (tsk != &init_task && *stackend != STACK_END_MAGIC) - printk(KERN_ALERT "Thread overran stack, or stack corrupted\n"); + printk(KERN_EMERG "Thread overran stack, or stack corrupted\n"); tsk->thread.cr2 = address; tsk->thread.trap_no = 14; @@ -684,7 +684,7 @@ no_context(struct pt_regs *regs, unsigned long error_code, sig = 0; /* Executive summary in case the body of the oops scrolled away */ - printk(KERN_EMERG "CR2: %016lx\n", address); + printk(KERN_DEFAULT "CR2: %016lx\n", address); oops_end(flags, regs, sig); } diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 1d7bca7f4f52..d117262deba3 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -296,7 +296,7 @@ static enum hrtimer_restart watchdog_timer_fn(struct hrtimer *hrtimer) if (__this_cpu_read(soft_watchdog_warn) == true) return HRTIMER_RESTART; - printk(KERN_ERR "BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n", + printk(KERN_EMERG "BUG: soft lockup - CPU#%d stuck for %us! [%s:%d]\n", smp_processor_id(), duration, current->comm, task_pid_nr(current)); print_modules(); diff --git a/lib/bug.c b/lib/bug.c index 19552096d16b..a28c1415357c 100644 --- a/lib/bug.c +++ b/lib/bug.c @@ -169,7 +169,7 @@ enum bug_trap_type report_bug(unsigned long bugaddr, struct pt_regs *regs) return BUG_TRAP_TYPE_WARN; } - printk(KERN_EMERG "------------[ cut here ]------------\n"); + printk(KERN_DEFAULT "------------[ cut here ]------------\n"); if (file) printk(KERN_CRIT "kernel BUG at %s:%u!\n", -- GitLab From f2b3ee9e4200b32d113b1bd3c93f9a836c97357c Mon Sep 17 00:00:00 2001 From: Willem de Bruijn Date: Thu, 26 Jan 2012 10:34:35 +0000 Subject: [PATCH 0289/1359] ipv6: Fix ip_gre lockless xmits. Tunnel devices set NETIF_F_LLTX to bypass HARD_TX_LOCK. Sit and ipip set this unconditionally in ops->setup, but gre enables it conditionally after parameter passing in ops->newlink. This is not called during tunnel setup as below, however, so GRE tunnels are still taking the lock. modprobe ip_gre ip tunnel add test0 mode gre remote 10.5.1.1 dev lo ip link set test0 up ip addr add 10.6.0.1 dev test0 # cat /sys/class/net/test0/features # $DIR/test_tunnel_xmit 10 10.5.2.1 ip route add 10.5.2.0/24 dev test0 ip tunnel del test0 The newlink callback is only called in rtnl_netlink, and only if the device is new, as it calls register_netdevice internally. Gre tunnels are created at 'ip tunnel add' with ioctl SIOCADDTUNNEL, which calls ipgre_tunnel_locate, which calls register_netdev. rtnl_newlink is called at 'ip link set', but skips ops->newlink and the device is up with locking still enabled. The equivalent ipip tunnel works fine, btw (just substitute 'method gre' for 'method ipip'). On kernels before /sys/class/net/*/features was removed [1], the first commented out line returns 0x6000 with method gre, which indicates that NETIF_F_LLTX (0x1000) is not set. With ipip, it reports 0x7000. This test cannot be used on recent kernels where the sysfs file is removed (and ETHTOOL_GFEATURES does not currently work for tunnel devices, because they lack dev->ethtool_ops). The second commented out line calls a simple transmission test [2] that sends on 24 cores at maximum rate. Results of a single run: ipip: 19,372,306 gre before patch: 4,839,753 gre after patch: 19,133,873 This patch replicates the condition check in ipgre_newlink to ipgre_tunnel_locate. It works for me, both with oseq on and off. This is the first time I looked at rtnetlink and iproute2 code, though, so someone more knowledgeable should probably check the patch. Thanks. The tail of both functions is now identical, by the way. To avoid code duplication, I'll be happy to rework this and merge the two. [1] http://patchwork.ozlabs.org/patch/104610/ [2] http://kernel.googlecode.com/files/xmit_udp_parallel.c Signed-off-by: Willem de Bruijn Acked-by: Eric Dumazet Signed-off-by: David S. Miller --- net/ipv4/ip_gre.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c index 2b53a1f7abf6..6b3ca5ba4450 100644 --- a/net/ipv4/ip_gre.c +++ b/net/ipv4/ip_gre.c @@ -422,6 +422,10 @@ static struct ip_tunnel *ipgre_tunnel_locate(struct net *net, if (register_netdevice(dev) < 0) goto failed_free; + /* Can use a lockless transmit, unless we generate output sequences */ + if (!(nt->parms.o_flags & GRE_SEQ)) + dev->features |= NETIF_F_LLTX; + dev_hold(dev); ipgre_tunnel_link(ign, nt); return nt; -- GitLab From f18da14565819ba43b8321237e2426a2914cc2ef Mon Sep 17 00:00:00 2001 From: Stefan Gula Date: Thu, 26 Jan 2012 11:01:06 +0000 Subject: [PATCH 0290/1359] net: RTNETLINK adjusting values of min_ifinfo_dump_size Setting link parameters on a netdevice changes the value of if_nlmsg_size(), therefore it is necessary to recalculate min_ifinfo_dump_size. Signed-off-by: Stefan Gula Signed-off-by: David S. Miller --- net/core/rtnetlink.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index f16444bc6cbb..65aebd450027 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -1509,6 +1509,9 @@ errout: if (send_addr_notify) call_netdevice_notifiers(NETDEV_CHANGEADDR, dev); + min_ifinfo_dump_size = max_t(u16, if_nlmsg_size(dev), + min_ifinfo_dump_size); + return err; } -- GitLab From d1bb399ad03c11e792f6dea198d3b1e23061f094 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Thu, 26 Jan 2012 22:05:58 +0100 Subject: [PATCH 0291/1359] firewire: ohci: add reset packet quirk for SB Audigy The Audigy's SB1394 controller is actually from Texas Instruments and has the same bus reset packet generation bug, so it needs the same quirk entry. Signed-off-by: Clemens Ladisch Cc: 2.6.36+ Signed-off-by: Stefan Richter --- drivers/firewire/ohci.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 6628feaa7622..21250eca28d1 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -263,6 +263,7 @@ static inline struct fw_ohci *fw_ohci(struct fw_card *card) static char ohci_driver_name[] = KBUILD_MODNAME; #define PCI_DEVICE_ID_AGERE_FW643 0x5901 +#define PCI_DEVICE_ID_CREATIVE_SB1394 0x4001 #define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380 #define PCI_DEVICE_ID_TI_TSB12LV22 0x8009 #define PCI_DEVICE_ID_TI_TSB12LV26 0x8020 @@ -289,6 +290,9 @@ static const struct { {PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6, QUIRK_NO_MSI}, + {PCI_VENDOR_ID_CREATIVE, PCI_DEVICE_ID_CREATIVE_SB1394, PCI_ANY_ID, + QUIRK_RESET_PACKET}, + {PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, PCI_ANY_ID, QUIRK_NO_MSI}, -- GitLab From 9018e93948c6f8f95fbcc9fa05f6c403d6adb406 Mon Sep 17 00:00:00 2001 From: Glauber Costa Date: Thu, 26 Jan 2012 12:09:28 +0000 Subject: [PATCH 0292/1359] net: explicitly add jump_label.h header to sock.h Commit 36a1211970193ce215de50ed1e4e1272bc814df1 removed linux/module.h include statement from one of the headers that end up in net/sock.h. It was providing us with static_branch() definition implicitly, so after its removal the build got broken. To fix this, and avoid having this happening in the future, let me do the right thing and include linux/jump_label.h explicitly in sock.h. Signed-off-by: Glauber Costa Reported-by: Randy Dunlap CC: David S. Miller Signed-off-by: David S. Miller --- include/net/sock.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/net/sock.h b/include/net/sock.h index 4c69ac165e6b..91c1c8baf020 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -55,6 +55,7 @@ #include #include #include +#include #include #include -- GitLab From dbc3982ae286e934e71f0b44e78d14844a9ca83b Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Mon, 23 Jan 2012 12:18:14 +0530 Subject: [PATCH 0293/1359] ARM: OMAP2+: timer: Fix crash due to wrong arg to __omap_dm_timer_read_counter Commit 2f0778af (ARM: 7205/2: sched_clock: allow sched_clock to be selected at runtime) had a typo for the case when CONFIG_OMAP_32K_TIMER is not set. In dmtimer_read_sched_clock(), wrong argument was getting passed to __omap_dm_timer_read_counter() function call; instead of "&clksrc", we were passing "clksrc.io_base", which results into kernel crash. To reproduce kernel crash, just disable the CONFIG_OMAP_32K_TIMER config option (and DEBUG_LL) and build/boot the kernel. This will use dmtimer as a kernel clocksource and lead to kernel crash during boot - [ 0.000000] OMAP clocksource: GPTIMER2 at 26000000 Hz [ 0.000000] sched_clock: 32 bits at 26MHz, resolution 38ns, wraps every 165191ms [ 0.000000] Unable to handle kernel paging request at virtual address 00030ef1 [ 0.000000] pgd = c0004000 [ 0.000000] [00030ef1] *pgd=00000000 [ 0.000000] Internal error: Oops: 5 [#1] SMP [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 Not tainted (3.3.0-rc1-11574-g0c76665-dirty #3) [ 0.000000] PC is at dmtimer_read_sched_clock+0x18/0x4c [ 0.000000] LR is at update_sched_clock+0x10/0x84 [ 0.000000] pc : [] lr : [] psr: 200001d3 [ 0.000000] sp : c0641f38 ip : c0641e18 fp : 0000000a [ 0.000000] r10: 151c3303 r9 : 00000026 r8 : 76276259 [ 0.000000] r7 : 00028547 r6 : c065ac80 r5 : 431bde82 r4 : c0655968 [ 0.000000] r3 : 00030ef1 r2 : fb032000 r1 : 00000028 r0 : 00000001 Signed-off-by: Vaibhav Hiremath [tony@atomide.com: updated comments] Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/timer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 6eeff0e0ae01..5c9acea95761 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -270,7 +270,7 @@ static struct clocksource clocksource_gpt = { static u32 notrace dmtimer_read_sched_clock(void) { if (clksrc.reserved) - return __omap_dm_timer_read_counter(clksrc.io_base, 1); + return __omap_dm_timer_read_counter(&clksrc, 1); return 0; } -- GitLab From 8ef5d844cc3a644ea6f7665932a4307e9fad01fa Mon Sep 17 00:00:00 2001 From: Yegor Yefremov Date: Mon, 23 Jan 2012 08:32:23 +0100 Subject: [PATCH 0294/1359] ARM: OMAP2+: GPMC: fix device size setup following statement can only change device size from 8-bit(0) to 16-bit(1), but not vice versa: regval |= GPMC_CONFIG1_DEVICESIZE(wval); so as this field has 1 reserved bit, that could be used in future, just clear both bits and then OR with the desired value Signed-off-by: Yegor Yefremov Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/gpmc.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 130034bf01d5..dfffbbf4c009 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -528,7 +528,13 @@ int gpmc_cs_configure(int cs, int cmd, int wval) case GPMC_CONFIG_DEV_SIZE: regval = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1); + + /* clear 2 target bits */ + regval &= ~GPMC_CONFIG1_DEVICESIZE(3); + + /* set the proper value */ regval |= GPMC_CONFIG1_DEVICESIZE(wval); + gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, regval); break; -- GitLab From ffa1e4ede453cf92cfcd9f96f9140c21aeb319f7 Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Sun, 18 Dec 2011 02:35:47 +0200 Subject: [PATCH 0295/1359] ARM: OMAP: fix erroneous mmc2 clock change on mmc3 setup hsmmc23_before_set_reg() can set MMCSDIO2ADPCLKISEL bit, which enables internal clock for MMC2. Currently this function is also called by code handling MMC3, and if .internal_clock is set in platform data (by default it currently is), it will set MMCSDIO2ADPCLKISEL for MMC2 instead of MMC3 (MMC3 doesn't have such bit so nothing actually needs to be done). This breaks 2nd SD slot on pandora. Fix this by changing hsmmc23_before_set_reg() to only handle MMC2. Note that this removes .remux() call for MMC3, but no board currently needs it and it's also not called for MMC4 and MMC5. Signed-off-by: Grazvydas Ignotas Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/hsmmc.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index bd844af13af5..8658bd77763c 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -182,7 +182,7 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) } } -static void hsmmc23_before_set_reg(struct device *dev, int slot, +static void hsmmc2_before_set_reg(struct device *dev, int slot, int power_on, int vdd) { struct omap_mmc_platform_data *mmc = dev->platform_data; @@ -407,14 +407,13 @@ static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c, c->caps &= ~MMC_CAP_8_BIT_DATA; c->caps |= MMC_CAP_4_BIT_DATA; } - /* FALLTHROUGH */ - case 3: if (mmc->slots[0].features & HSMMC_HAS_PBIAS) { /* off-chip level shifting, or none */ - mmc->slots[0].before_set_reg = hsmmc23_before_set_reg; + mmc->slots[0].before_set_reg = hsmmc2_before_set_reg; mmc->slots[0].after_set_reg = NULL; } break; + case 3: case 4: case 5: mmc->slots[0].before_set_reg = NULL; -- GitLab From d82e5190da9057e31d6f0fe5771dfbe55ff9125f Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Thu, 12 Jan 2012 16:26:45 +0200 Subject: [PATCH 0296/1359] ARM: OMAP: fix MMC2 loopback clock handling Currently MMC2 setup code can only enable loopback clock and relies on reset value for boards that need to have it disabled. This causes a problem with certain bootloaders that always enable that clock, resulting with unwanted bootloader dependencies. Fix this by making it disable the clock if board data says so. Signed-off-by: Grazvydas Ignotas Acked-by: Igor Grinberg Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/hsmmc.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 8658bd77763c..ad0adb5a1e0e 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -175,11 +175,12 @@ static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc) { u32 reg; - if (mmc->slots[0].internal_clock) { - reg = omap_ctrl_readl(control_devconf1_offset); + reg = omap_ctrl_readl(control_devconf1_offset); + if (mmc->slots[0].internal_clock) reg |= OMAP2_MMCSDIO2ADPCLKISEL; - omap_ctrl_writel(reg, control_devconf1_offset); - } + else + reg &= ~OMAP2_MMCSDIO2ADPCLKISEL; + omap_ctrl_writel(reg, control_devconf1_offset); } static void hsmmc2_before_set_reg(struct device *dev, int slot, -- GitLab From e0feca899c9785316ec67954f1a8e84102eaaca7 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Fri, 23 Dec 2011 18:39:31 +0100 Subject: [PATCH 0297/1359] ARM: OMAP2+: arch/arm/mach-omap2/devices.c: introduce missing kfree pdata needs to be freed before leaving the function in an error case. A simplified version of the semantic match that finds the problem is as follows: (http://coccinelle.lip6.fr) // @r exists@ local idexpression x; statement S; identifier f1; position p1,p2; expression *ptr != NULL; @@ x@p1 = \(kmalloc\|kzalloc\|kcalloc\)(...); ... if (x == NULL) S <... when != x when != if (...) { <+...x...+> } x->f1 ...> ( return \(0\|<+...x...+>\|ptr\); | return@p2 ...; ) @script:python@ p1 << r.p1; p2 << r.p2; @@ print "* file: %s kmalloc %s return %s" % (p1[0].file,p1[0].line,p2[0].line) // Signed-off-by: Julia Lawall Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/devices.c | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 0b510ad01a00..283d11eae693 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -405,6 +405,7 @@ static int omap_mcspi_init(struct omap_hwmod *oh, void *unused) break; default: pr_err("Invalid McSPI Revision value\n"); + kfree(pdata); return -EINVAL; } -- GitLab From 14ea960164ecb25f7617eba33e7c7f9163e93e7c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 12 Jan 2012 10:55:17 +0100 Subject: [PATCH 0298/1359] ARM: OMAP2+: arch/arm/mach-omap2/smartreflex.c: add missing iounmap Add missing iounmap in error handling code, in a case where the function already preforms iounmap on some other execution path. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression e; statement S,S1; int ret; @@ e = \(ioremap\|ioremap_nocache\)(...) ... when != iounmap(e) if (<+...e...+>) S ... when any when != iounmap(e) *if (...) { ... when != iounmap(e) return ...; } ... when any iounmap(e); // Signed-off-by: Julia Lawall Signed-off-by: Tony Lindgren --- arch/arm/mach-omap2/smartreflex.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c index 9dd93453e563..7e755bb0ffc4 100644 --- a/arch/arm/mach-omap2/smartreflex.c +++ b/arch/arm/mach-omap2/smartreflex.c @@ -897,7 +897,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) ret = sr_late_init(sr_info); if (ret) { pr_warning("%s: Error in SR late init\n", __func__); - return ret; + goto err_iounmap; } } -- GitLab From 485bc54c3360e9c1d595c48c9c82dbd3a51e133e Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Thu, 22 Dec 2011 11:30:09 +0900 Subject: [PATCH 0299/1359] drm/exynos: use release_mem_region instead of release_resource To make a api pair of request_mem_region and release_mem_region, release_mem_region is used instead of release_resource. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_hdmi.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index f48f7ce92f5f..3429d3fd93f3 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1116,8 +1116,8 @@ err_ddc: err_iomap: iounmap(hdata->regs); err_req_region: - release_resource(hdata->regs_res); - kfree(hdata->regs_res); + release_mem_region(hdata->regs_res->start, + resource_size(hdata->regs_res)); err_resource: hdmi_resources_cleanup(hdata); err_data: @@ -1145,8 +1145,8 @@ static int __devexit hdmi_remove(struct platform_device *pdev) iounmap(hdata->regs); - release_resource(hdata->regs_res); - kfree(hdata->regs_res); + release_mem_region(hdata->regs_res->start, + resource_size(hdata->regs_res)); /* hdmiphy i2c driver */ i2c_del_driver(&hdmiphy_driver); -- GitLab From 2363dc636df34abb795c31668eeadc659e815fbd Mon Sep 17 00:00:00 2001 From: Seung-Woo Kim Date: Wed, 4 Jan 2012 15:34:32 +0900 Subject: [PATCH 0300/1359] drm/exynos: fix build dependency for DRM_EXYNOS_HDMI DRM_EXYNOS_HDMI driver and VIDEO_SAMSUNG_S5P_TV driver should be not enabled at once because they use same HW blocks. So dependency for DRM_EXYNOS_HDMI is fixed to check VIDEO_SAMSUNG_S5P_TV=n. Signed-off-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig index f9aaa56eae07..4ab915e88936 100644 --- a/drivers/gpu/drm/exynos/Kconfig +++ b/drivers/gpu/drm/exynos/Kconfig @@ -21,7 +21,7 @@ config DRM_EXYNOS_FIMD config DRM_EXYNOS_HDMI tristate "Exynos DRM HDMI" - depends on DRM_EXYNOS + depends on DRM_EXYNOS && !VIDEO_SAMSUNG_S5P_TV help Choose this option if you want to use Exynos HDMI for DRM. If M is selected, the module will be called exynos_drm_hdmi -- GitLab From a4b42dab293afdabc3e4ae57cbc743ad05af0e4b Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Mon, 16 Jan 2012 18:55:02 +0900 Subject: [PATCH 0301/1359] drm/exynos: fixed build dependency for DRM_EXYNOS_FIMD FB based FIMD and DRM based FIMD drivers use same hardware so with this patch, only one of them would be selected. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig index 4ab915e88936..b9e5266c341b 100644 --- a/drivers/gpu/drm/exynos/Kconfig +++ b/drivers/gpu/drm/exynos/Kconfig @@ -13,7 +13,7 @@ config DRM_EXYNOS config DRM_EXYNOS_FIMD tristate "Exynos DRM FIMD" - depends on DRM_EXYNOS + depends on DRM_EXYNOS && !FB_S3C default n help Choose this option if you want to use Exynos FIMD for DRM. -- GitLab From f15013033e2dd363b3ad181bfd27fa4e8e8ffda8 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Tue, 17 Jan 2012 14:08:55 +0900 Subject: [PATCH 0302/1359] MAINTAINERS: added maintainer entry for Exynos DRM Driver. I'd like to add my colleagues who dedicated to developing and improving our driver to maintainer entry. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- MAINTAINERS | 3 +++ 1 file changed, 3 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 89b70df91f4f..2387cc3b8215 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2339,6 +2339,9 @@ F: include/drm/i915* DRM DRIVERS FOR EXYNOS M: Inki Dae +M: Joonyoung Shim +M: Seung-Woo Kim +M: Kyungmin Park L: dri-devel@lists.freedesktop.org S: Supported F: drivers/gpu/drm/exynos -- GitLab From d22b086970c3ee2d327d7dfdcb436254f7f72204 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Sat, 21 Jan 2012 13:29:27 -0500 Subject: [PATCH 0303/1359] MAINTAINERS: Add hwmon entries for Wolfson The actual driver code seems to have been lost in the shuffle. Signed-off-by: Mark Brown Signed-off-by: Guenter Roeck --- MAINTAINERS | 1 + 1 file changed, 1 insertion(+) diff --git a/MAINTAINERS b/MAINTAINERS index 89b70df91f4f..8cc2d457a91b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -7357,6 +7357,7 @@ S: Supported F: Documentation/hwmon/wm83?? F: arch/arm/mach-s3c64xx/mach-crag6410* F: drivers/leds/leds-wm83*.c +F: drivers/hwmon/wm83??-hwmon.c F: drivers/input/misc/wm831x-on.c F: drivers/input/touchscreen/wm831x-ts.c F: drivers/input/touchscreen/wm97*.c -- GitLab From cba9384b3c53d1a302206f68134a6cbfbae1d686 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Fri, 20 Jan 2012 02:01:11 -0800 Subject: [PATCH 0304/1359] MAINTAINERS: Drop maintainer for MAX1668 hwmon driver David no longer has access to MAX1688 hardware, so drop him from the maintainers list. Cc: David George Signed-off-by: Guenter Roeck Acked-by: David George Acked-by: Jean Delvare --- MAINTAINERS | 7 ------- 1 file changed, 7 deletions(-) diff --git a/MAINTAINERS b/MAINTAINERS index 8cc2d457a91b..686c652e1ae1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4267,13 +4267,6 @@ S: Orphan F: drivers/video/matrox/matroxfb_* F: include/linux/matroxfb.h -MAX1668 TEMPERATURE SENSOR DRIVER -M: "David George" -L: lm-sensors@lm-sensors.org -S: Maintained -F: Documentation/hwmon/max1668 -F: drivers/hwmon/max1668.c - MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER M: "Hans J. Koch" L: lm-sensors@lm-sensors.org -- GitLab From 373af0c0c539b109ea978e96f217df0fc20aa261 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Fri, 27 Jan 2012 11:54:58 +0900 Subject: [PATCH 0305/1359] drm/exynos: fixed pm feature for fimd module. this patch separates fimd specific power on/off function from pm function and the pm interfaces will call that function for power on or off. and also removes unnecessary codes of resume function. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park --- drivers/gpu/drm/exynos/exynos_drm_fimd.c | 109 ++++++++++++----------- 1 file changed, 59 insertions(+), 50 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index ca83139cd309..b6a737d196ae 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -158,7 +158,8 @@ static void fimd_dpms(struct device *subdrv_dev, int mode) case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: case DRM_MODE_DPMS_OFF: - pm_runtime_put_sync(subdrv_dev); + if (!ctx->suspended) + pm_runtime_put_sync(subdrv_dev); break; default: DRM_DEBUG_KMS("unspecified mode %d\n", mode); @@ -734,6 +735,46 @@ static void fimd_clear_win(struct fimd_context *ctx, int win) writel(val, ctx->regs + SHADOWCON); } +static int fimd_power_on(struct fimd_context *ctx, bool enable) +{ + struct exynos_drm_subdrv *subdrv = &ctx->subdrv; + struct device *dev = subdrv->manager.dev; + + DRM_DEBUG_KMS("%s\n", __FILE__); + + if (enable != false && enable != true) + return -EINVAL; + + if (enable) { + int ret; + + ret = clk_enable(ctx->bus_clk); + if (ret < 0) + return ret; + + ret = clk_enable(ctx->lcd_clk); + if (ret < 0) { + clk_disable(ctx->bus_clk); + return ret; + } + + ctx->suspended = false; + + /* if vblank was enabled status, enable it again. */ + if (test_and_clear_bit(0, &ctx->irq_flags)) + fimd_enable_vblank(dev); + + fimd_apply(dev); + } else { + clk_disable(ctx->lcd_clk); + clk_disable(ctx->bus_clk); + + ctx->suspended = true; + } + + return 0; +} + static int __devinit fimd_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -911,39 +952,30 @@ out: #ifdef CONFIG_PM_SLEEP static int fimd_suspend(struct device *dev) { - int ret; + struct fimd_context *ctx = get_fimd_context(dev); if (pm_runtime_suspended(dev)) return 0; - ret = pm_runtime_suspend(dev); - if (ret < 0) - return ret; - - return 0; + /* + * do not use pm_runtime_suspend(). if pm_runtime_suspend() is + * called here, an error would be returned by that interface + * because the usage_count of pm runtime is more than 1. + */ + return fimd_power_on(ctx, false); } static int fimd_resume(struct device *dev) { - int ret; - - ret = pm_runtime_resume(dev); - if (ret < 0) { - DRM_ERROR("failed to resume runtime pm.\n"); - return ret; - } - - pm_runtime_disable(dev); - - ret = pm_runtime_set_active(dev); - if (ret < 0) { - DRM_ERROR("failed to active runtime pm.\n"); - pm_runtime_enable(dev); - pm_runtime_suspend(dev); - return ret; - } + struct fimd_context *ctx = get_fimd_context(dev); - pm_runtime_enable(dev); + /* + * if entered to sleep when lcd panel was on, the usage_count + * of pm runtime would still be 1 so in this case, fimd driver + * should be on directly not drawing on pm runtime interface. + */ + if (!pm_runtime_suspended(dev)) + return fimd_power_on(ctx, true); return 0; } @@ -956,39 +988,16 @@ static int fimd_runtime_suspend(struct device *dev) DRM_DEBUG_KMS("%s\n", __FILE__); - clk_disable(ctx->lcd_clk); - clk_disable(ctx->bus_clk); - - ctx->suspended = true; - return 0; + return fimd_power_on(ctx, false); } static int fimd_runtime_resume(struct device *dev) { struct fimd_context *ctx = get_fimd_context(dev); - int ret; DRM_DEBUG_KMS("%s\n", __FILE__); - ret = clk_enable(ctx->bus_clk); - if (ret < 0) - return ret; - - ret = clk_enable(ctx->lcd_clk); - if (ret < 0) { - clk_disable(ctx->bus_clk); - return ret; - } - - ctx->suspended = false; - - /* if vblank was enabled status, enable it again. */ - if (test_and_clear_bit(0, &ctx->irq_flags)) - fimd_enable_vblank(dev); - - fimd_apply(dev); - - return 0; + return fimd_power_on(ctx, true); } #endif -- GitLab From b7c9705cb799adabc0ae430943843e6c6e82617d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 27 Jan 2012 14:41:20 +0900 Subject: [PATCH 0306/1359] ARM: S3C64XX: Make s3c64xx_init_uarts() static Now that it's in common.c it's not used in multiple source files. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/common.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c index 4a7394d4bd9e..bee7dcd4df7c 100644 --- a/arch/arm/mach-s3c64xx/common.c +++ b/arch/arm/mach-s3c64xx/common.c @@ -49,7 +49,7 @@ /* uart registration process */ -void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +static void __init s3c64xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) { s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); } -- GitLab From 5d3a21990c58b68a31dcbf4c378231781c53bfc1 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Fri, 27 Jan 2012 14:43:44 +0900 Subject: [PATCH 0307/1359] ARM: S3C6410: Use device names for both I2C clocks When the S3C64xx CPUs were converted to clkdev mappings were added for the I2C controllers on them. On S3C6410 a device name is specified for I2C controller 1 but not for controller 0 which makes the code less robust as we'll falsely return the clock for controller 0 if there's an error in the request for controller 1. Improve things by registering a device name for controller 0 as well. Due to the fact that we change the numbering for controller 0 depending on if we've registered controller 1 this requires an ifdef to choose the name. Signed-off-by: Mark Brown Signed-off-by: Kukjin Kim --- arch/arm/mach-s3c64xx/clock.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 31bb27dc4aeb..aebbcc291b4e 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -138,6 +138,11 @@ static struct clk init_clocks_off[] = { .ctrlbit = S3C_CLKCON_PCLK_TSADC, }, { .name = "i2c", +#ifdef CONFIG_S3C_DEV_I2C1 + .devname = "s3c2440-i2c.0", +#else + .devname = "s3c2440-i2c", +#endif .parent = &clk_p, .enable = s3c64xx_pclk_ctrl, .ctrlbit = S3C_CLKCON_PCLK_IIC, -- GitLab From 556ef3e474dd87d627655dafdf1e7eaf4747e388 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Fri, 27 Jan 2012 14:47:45 +0900 Subject: [PATCH 0308/1359] ARM: EXYNOS: fix non-SMP builds for EXYNOS4 This patch fixes the following build issue, which happens only if SMP has been disabled: arch/arm/mach-exynos/built-in.o: In function `exynos4_pm_resume': arch/arm/mach-exynos/pm.c:387: undefined reference to `scu_enable' Signed-off-by: Marek Szyprowski Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/pm.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c index a4f61a43c7ba..2521b23553eb 100644 --- a/arch/arm/mach-exynos/pm.c +++ b/arch/arm/mach-exynos/pm.c @@ -384,7 +384,9 @@ static void exynos4_pm_resume(void) exynos4_restore_pll(); +#ifdef CONFIG_SMP scu_enable(S5P_VA_SCU); +#endif #ifdef CONFIG_CACHE_L2X0 s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save)); -- GitLab From 693cec9755e5198e0c291a4bfea6ebb1c7054550 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 27 Jan 2012 14:51:21 +0900 Subject: [PATCH 0309/1359] ARM: SAMSUNG: Fix platform data setup for I2C adapter 0 The common static default_i2c_data structure gets bus_num set by each s3c_i2c?_set_platdata() call, except for s3c_i2c0_set_platdata(). Thus if for instance s3c_i2c1_set_platdata() is called prior to s3c_i2c0_set_platdata() the I2C0 controller has bus_num set to wrong value of 1, i.e. the one from previous set_platdata call. Fix this by also setting bus_num for I2C0. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Kukjin Kim --- arch/arm/plat-samsung/devs.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/arch/arm/plat-samsung/devs.c b/arch/arm/plat-samsung/devs.c index 32a6e394db24..f10768e988d4 100644 --- a/arch/arm/plat-samsung/devs.c +++ b/arch/arm/plat-samsung/devs.c @@ -468,8 +468,10 @@ void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) { struct s3c2410_platform_i2c *npd; - if (!pd) + if (!pd) { pd = &default_i2c_data; + pd->bus_num = 0; + } npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), &s3c_device_i2c0); -- GitLab From 7cdf04d7d4c0b5b205817ceb7a21c6e07d09ce11 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Fri, 27 Jan 2012 14:56:17 +0900 Subject: [PATCH 0310/1359] ARM: EXYNOS: Remove build warning without enabling PM Fixed following build warning with exynos4_defconfig. arch/arm/mach-exynos/clock.c:33: warning: 'exynos4_clock_save' defined but not used arch/arm/mach-exynos/clock-exynos4210.c:35: warning: 'exynos4210_clock_save' defined but not used arch/arm/mach-exynos/clock-exynos4212.c:35: warning: 'exynos4212_clock_save' defined but not used Signed-off-by: Kukjin Kim --- arch/arm/mach-exynos/clock-exynos4210.c | 2 ++ arch/arm/mach-exynos/clock-exynos4212.c | 2 ++ arch/arm/mach-exynos/clock.c | 2 ++ 3 files changed, 6 insertions(+) diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c index a5823a7f249e..13312ccb2d93 100644 --- a/arch/arm/mach-exynos/clock-exynos4210.c +++ b/arch/arm/mach-exynos/clock-exynos4210.c @@ -32,6 +32,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKSRC_LCD1), @@ -42,6 +43,7 @@ static struct sleep_save exynos4210_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_IP_LCD1), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210), }; +#endif static struct clksrc_clk *sysclks[] = { /* nothing here yet */ diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c index 26a668b0d101..48af28566fa1 100644 --- a/arch/arm/mach-exynos/clock-exynos4212.c +++ b/arch/arm/mach-exynos/clock-exynos4212.c @@ -32,12 +32,14 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4212_clock_save[] = { SAVE_ITEM(S5P_CLKSRC_IMAGE), SAVE_ITEM(S5P_CLKDIV_IMAGE), SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212), SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212), }; +#endif static struct clk *clk_src_mpll_user_list[] = { [0] = &clk_fin_mpll, diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c index 5a8c42e90005..187287aa57ab 100644 --- a/arch/arm/mach-exynos/clock.c +++ b/arch/arm/mach-exynos/clock.c @@ -30,6 +30,7 @@ #include "common.h" +#ifdef CONFIG_PM_SLEEP static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKDIV_LEFTBUS), SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS), @@ -93,6 +94,7 @@ static struct sleep_save exynos4_clock_save[] = { SAVE_ITEM(S5P_CLKGATE_SCLKCPU), SAVE_ITEM(S5P_CLKGATE_IP_CPU), }; +#endif struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", -- GitLab From a1ad803322a904a250fa901020b4a4dfaf51a829 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 25 Jan 2012 22:07:05 +0100 Subject: [PATCH 0311/1359] sh: se7724: fix compile breakage Fix compilation breakage arch/sh/boards/mach-se/7724/setup.c:182: error: 'V4L2_PIX_FMT_RGB565' undeclared here (not in a function) make[3]: *** [arch/sh/boards/mach-se/7724/setup.o] Error 1 caused by commit "fbdev: sh_mobile_lcdc: Support FOURCC-based format API" Also add other missing headers, even if compilation currently succeeds because of their indirect inclusion via other headers. Signed-off-by: Guennadi Liakhovetski Acked-by: Laurent Pinchart Signed-off-by: Paul Mundt --- arch/sh/boards/mach-ap325rxa/setup.c | 1 + arch/sh/boards/mach-ecovec24/setup.c | 2 ++ arch/sh/boards/mach-kfr2r09/setup.c | 1 + arch/sh/boards/mach-migor/setup.c | 2 ++ arch/sh/boards/mach-se/7724/setup.c | 1 + 5 files changed, 7 insertions(+) diff --git a/arch/sh/boards/mach-ap325rxa/setup.c b/arch/sh/boards/mach-ap325rxa/setup.c index 6418e95c2b6b..ebd0f818a25f 100644 --- a/arch/sh/boards/mach-ap325rxa/setup.c +++ b/arch/sh/boards/mach-ap325rxa/setup.c @@ -22,6 +22,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/sh/boards/mach-ecovec24/setup.c b/arch/sh/boards/mach-ecovec24/setup.c index 033ef2ba621f..cde7c0085ced 100644 --- a/arch/sh/boards/mach-ecovec24/setup.c +++ b/arch/sh/boards/mach-ecovec24/setup.c @@ -29,9 +29,11 @@ #include #include #include +#include #include