diff --git a/CREDITS b/CREDITS
index 3b9e160d6f7efe52898700a41b923df2c5581413..3b7a1548aaf9c945d6c9c46f2ef310b4f2de1807 100644
--- a/CREDITS
+++ b/CREDITS
@@ -882,13 +882,12 @@ S: Blacksburg, Virginia 24061
S: USA
N: Randy Dunlap
-E: rddunlap@osdl.org
+E: rdunlap@xenotime.net
W: http://www.xenotime.net/linux/linux.html
W: http://www.linux-usb.org
D: Linux-USB subsystem, USB core/UHCI/printer/storage drivers
D: x86 SMP, ACPI, bootflag hacking
-S: 12725 SW Millikan Way, Suite 400
-S: Beaverton, Oregon 97005
+S: (ask for current address)
S: USA
N: Bob Dunlop
@@ -1881,6 +1880,13 @@ S: Schlehenweg 9
S: D-91080 Uttenreuth
S: Germany
+N: Jaya Kumar
+E: jayalk@intworks.biz
+W: http://www.intworks.biz
+D: Arc monochrome LCD framebuffer driver, x86 reboot fixups
+S: Gurgaon, India
+S: Kuala Lumpur, Malaysia
+
N: Gabor Kuti
M: seasons@falcon.sch.bme.hu
M: seasons@makosteszta.sote.hu
@@ -2374,9 +2380,10 @@ E: tmolina@cablespeed.com
D: bug fixes, documentation, minor hackery
N: James Morris
-E: jmorris@intercode.com.au
+E: jmorris@redhat.com
W: http://www.intercode.com.au/jmorris/
-D: Netfilter, Linux Security Modules (LSM).
+D: Netfilter, Linux Security Modules (LSM), SELinux, IPSec,
+D: Crypto API, general networking, miscellaneous.
S: PO Box 707
S: Spit Junction NSW 2088
S: Australia
@@ -2476,13 +2483,9 @@ S: Potsdam, New York 13676
S: USA
N: Dave Neuer
-E: dneuer@innovation-charter.com
-E: mr_fred_smoothie@yahoo.com
+E: dave.neuer@pobox.com
D: Helped implement support for Compaq's H31xx series iPAQs
D: Other mostly minor tweaks & bugfixes
-S: 325 E. Main St., Suite 3
-S: Carnegie, PA 15105
-S: USA
N: Michael Neuffer
E: mike@i-Connect.Net
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index e69b3d2e788436b0db1ecfb38245aeb4aeed0f60..87da3478fada4298d0b2d9c396904e2e3e7fa8f0 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -8,7 +8,7 @@
DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml videobook.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
- procfs-guide.xml writing_usb_driver.xml scsidrivers.xml \
+ procfs-guide.xml writing_usb_driver.xml \
sis900.xml kernel-api.xml journal-api.xml lsm.xml usb.xml \
gadget.xml libata.xml mtdnand.xml librs.xml
diff --git a/Documentation/DocBook/kernel-api.tmpl b/Documentation/DocBook/kernel-api.tmpl
index 757cef8f84918165b68a8ee67a763fb21fd342b3..bb6a0106be1100951a7b99696f9e8176bd862e7e 100644
--- a/Documentation/DocBook/kernel-api.tmpl
+++ b/Documentation/DocBook/kernel-api.tmpl
@@ -338,7 +338,6 @@ X!Earch/i386/kernel/mca.c
X!Iinclude/linux/device.h
-->
!Edrivers/base/driver.c
-!Edrivers/base/class_simple.c
!Edrivers/base/core.c
!Edrivers/base/firmware_class.c
!Edrivers/base/transport_class.c
diff --git a/Documentation/DocBook/libata.tmpl b/Documentation/DocBook/libata.tmpl
index cf2fce7707da202e7f408f40929dde7255cf742e..6df1dfd18b651fce1224fe0e127cf7e777981d34 100644
--- a/Documentation/DocBook/libata.tmpl
+++ b/Documentation/DocBook/libata.tmpl
@@ -14,7 +14,7 @@
- 2003
+ 2003-2005
Jeff Garzik
@@ -44,30 +44,38 @@
-
- Thanks
+
+ Introduction
- The bulk of the ATA knowledge comes thanks to long conversations with
- Andre Hedrick (www.linux-ide.org).
+ libATA is a library used inside the Linux kernel to support ATA host
+ controllers and devices. libATA provides an ATA driver API, class
+ transports for ATA and ATAPI devices, and SCSI<->ATA translation
+ for ATA devices according to the T10 SAT specification.
- Thanks to Alan Cox for pointing out similarities
- between SATA and SCSI, and in general for motivation to hack on
- libata.
-
-
- libata's device detection
- method, ata_pio_devchk, and in general all the early probing was
- based on extensive study of Hale Landis's probe/reset code in his
- ATADRVR driver (www.ata-atapi.com).
+ This Guide documents the libATA driver API, library functions, library
+ internals, and a couple sample ATA low-level drivers.
libata Driver API
+
+ struct ata_port_operations is defined for every low-level libata
+ hardware driver, and it controls how the low-level driver
+ interfaces with the ATA and SCSI layers.
+
+
+ FIS-based drivers will hook into the system with ->qc_prep() and
+ ->qc_issue() high-level hooks. Hardware which behaves in a manner
+ similar to PCI IDE hardware may utilize several generic helpers,
+ defining at a bare minimum the bus I/O addresses of the ATA shadow
+ register blocks.
+
struct ata_port_operations
+ Disable ATA port
void (*port_disable) (struct ata_port *);
@@ -78,6 +86,9 @@ void (*port_disable) (struct ata_port *);
unplug).
+
+
+ Post-IDENTIFY device configuration
void (*dev_config) (struct ata_port *, struct ata_device *);
@@ -88,6 +99,9 @@ void (*dev_config) (struct ata_port *, struct ata_device *);
issue of SET FEATURES - XFER MODE, and prior to operation.
+
+
+ Set PIO/DMA mode
void (*set_piomode) (struct ata_port *, struct ata_device *);
void (*set_dmamode) (struct ata_port *, struct ata_device *);
@@ -108,6 +122,9 @@ void (*post_set_mode) (struct ata_port *ap);
->set_dma_mode() is only called if DMA is possible.
+
+
+ Taskfile read/write
void (*tf_load) (struct ata_port *ap, struct ata_taskfile *tf);
void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
@@ -120,6 +137,9 @@ void (*tf_read) (struct ata_port *ap, struct ata_taskfile *tf);
taskfile register values.
+
+
+ ATA command execute
void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
@@ -129,17 +149,37 @@ void (*exec_command)(struct ata_port *ap, struct ata_taskfile *tf);
->tf_load(), to be initiated in hardware.
+
+
+ Per-cmd ATAPI DMA capabilities filter
+
+int (*check_atapi_dma) (struct ata_queued_cmd *qc);
+
+
+
+Allow low-level driver to filter ATA PACKET commands, returning a status
+indicating whether or not it is OK to use DMA for the supplied PACKET
+command.
+
+
+
+
+ Read specific ATA shadow registers
u8 (*check_status)(struct ata_port *ap);
-void (*dev_select)(struct ata_port *ap, unsigned int device);
+u8 (*check_altstatus)(struct ata_port *ap);
+u8 (*check_err)(struct ata_port *ap);
- Reads the Status ATA shadow register from hardware. On some
- hardware, this has the side effect of clearing the interrupt
- condition.
+ Reads the Status/AltStatus/Error ATA shadow register from
+ hardware. On some hardware, reading the Status register has
+ the side effect of clearing the interrupt condition.
+
+
+ Select ATA device on bus
void (*dev_select)(struct ata_port *ap, unsigned int device);
@@ -147,9 +187,13 @@ void (*dev_select)(struct ata_port *ap, unsigned int device);
Issues the low-level hardware command(s) that causes one of N
hardware devices to be considered 'selected' (active and
- available for use) on the ATA bus.
+ available for use) on the ATA bus. This generally has no
+meaning on FIS-based devices.
+
+
+ Reset ATA bus
void (*phy_reset) (struct ata_port *ap);
@@ -162,17 +206,31 @@ void (*phy_reset) (struct ata_port *ap);
functions ata_bus_reset() or sata_phy_reset() for this hook.
+
+
+ Control PCI IDE BMDMA engine
void (*bmdma_setup) (struct ata_queued_cmd *qc);
void (*bmdma_start) (struct ata_queued_cmd *qc);
+void (*bmdma_stop) (struct ata_port *ap);
+u8 (*bmdma_status) (struct ata_port *ap);
- When setting up an IDE BMDMA transaction, these hooks arm
- (->bmdma_setup) and fire (->bmdma_start) the hardware's DMA
- engine.
+When setting up an IDE BMDMA transaction, these hooks arm
+(->bmdma_setup), fire (->bmdma_start), and halt (->bmdma_stop)
+the hardware's DMA engine. ->bmdma_status is used to read the standard
+PCI IDE DMA Status register.
+
+These hooks are typically either no-ops, or simply not implemented, in
+FIS-based drivers.
+
+
+
+
+ High-level taskfile hooks
void (*qc_prep) (struct ata_queued_cmd *qc);
int (*qc_issue) (struct ata_queued_cmd *qc);
@@ -190,20 +248,26 @@ int (*qc_issue) (struct ata_queued_cmd *qc);
->qc_issue is used to make a command active, once the hardware
and S/G tables have been prepared. IDE BMDMA drivers use the
helper function ata_qc_issue_prot() for taskfile protocol-based
- dispatch. More advanced drivers roll their own ->qc_issue
- implementation, using this as the "issue new ATA command to
- hardware" hook.
+ dispatch. More advanced drivers implement their own ->qc_issue.
+
+
+ Timeout (error) handling
void (*eng_timeout) (struct ata_port *ap);
- This is a high level error handling function, called from the
- error handling thread, when a command times out.
+This is a high level error handling function, called from the
+error handling thread, when a command times out. Most newer
+hardware will implement its own error handling code here. IDE BMDMA
+drivers may use the helper function ata_eng_timeout().
+
+
+ Hardware interrupt handling
irqreturn_t (*irq_handler)(int, void *, struct pt_regs *);
void (*irq_clear) (struct ata_port *);
@@ -216,6 +280,9 @@ void (*irq_clear) (struct ata_port *);
is quiet.
+
+
+ SATA phy read/write
u32 (*scr_read) (struct ata_port *ap, unsigned int sc_reg);
void (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
@@ -227,6 +294,9 @@ void (*scr_write) (struct ata_port *ap, unsigned int sc_reg,
if ->phy_reset hook called the sata_phy_reset() helper function.
+
+
+ Init and shutdown
int (*port_start) (struct ata_port *ap);
void (*port_stop) (struct ata_port *ap);
@@ -240,15 +310,17 @@ void (*host_stop) (struct ata_host_set *host_set);
tasks.
- ->host_stop() is called when the rmmod or hot unplug process
- begins. The hook must stop all hardware interrupts, DMA
- engines, etc.
-
-
->port_stop() is called after ->host_stop(). It's sole function
is to release DMA/memory resources, now that they are no longer
actively being used.
+
+ ->host_stop() is called after all ->port_stop() calls
+have completed. The hook must finalize hardware shutdown, release DMA
+and other resources, etc.
+
+
+
@@ -279,4 +351,24 @@ void (*host_stop) (struct ata_host_set *host_set);
!Idrivers/scsi/sata_sil.c
+
+ Thanks
+
+ The bulk of the ATA knowledge comes thanks to long conversations with
+ Andre Hedrick (www.linux-ide.org), and long hours pondering the ATA
+ and SCSI specifications.
+
+
+ Thanks to Alan Cox for pointing out similarities
+ between SATA and SCSI, and in general for motivation to hack on
+ libata.
+
+
+ libata's device detection
+ method, ata_pio_devchk, and in general all the early probing was
+ based on extensive study of Hale Landis's probe/reset code in his
+ ATADRVR driver (www.ata-atapi.com).
+
+
+
diff --git a/Documentation/DocBook/scsidrivers.tmpl b/Documentation/DocBook/scsidrivers.tmpl
deleted file mode 100644
index d058e65daf19f4bb8c257e2273f4c935ccee5121..0000000000000000000000000000000000000000
--- a/Documentation/DocBook/scsidrivers.tmpl
+++ /dev/null
@@ -1,193 +0,0 @@
-
-
-
-
-
- SCSI Subsystem Interfaces
-
-
-
- Douglas
- Gilbert
-
-
- dgilbert@interlog.com
-
-
-
-
- 2003-08-11
-
-
- 2002
- 2003
- Douglas Gilbert
-
-
-
-
- This documentation is free software; you can redistribute
- it and/or modify it under the terms of the GNU General Public
- License as published by the Free Software Foundation; either
- version 2 of the License, or (at your option) any later
- version.
-
-
-
- This program is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied
- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- See the GNU General Public License for more details.
-
-
-
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
-
-
-
- For more details see the file COPYING in the source
- distribution of Linux.
-
-
-
-
-
-
-
-
- Introduction
-
-This document outlines the interface between the Linux scsi mid level
-and lower level drivers. Lower level drivers are variously called HBA
-(host bus adapter) drivers, host drivers (HD) or pseudo adapter drivers.
-The latter alludes to the fact that a lower level driver may be a
-bridge to another IO subsystem (and the "ide-scsi" driver is an example
-of this). There can be many lower level drivers active in a running
-system, but only one per hardware type. For example, the aic7xxx driver
-controls adaptec controllers based on the 7xxx chip series. Most lower
-level drivers can control one or more scsi hosts (a.k.a. scsi initiators).
-
-
-This document can been found in an ASCII text file in the linux kernel
-source: Documentation/scsi/scsi_mid_low_api.txt .
-It currently hold a little more information than this document. The
-drivers/scsi/hosts.h and
-drivers/scsi/scsi.h headers contain descriptions of members
-of important structures for the scsi subsystem.
-
-
-
-
- Driver structure
-
-Traditionally a lower level driver for the scsi subsystem has been
-at least two files in the drivers/scsi directory. For example, a
-driver called "xyz" has a header file "xyz.h" and a source file
-"xyz.c". [Actually there is no good reason why this couldn't all
-be in one file.] Some drivers that have been ported to several operating
-systems (e.g. aic7xxx which has separate files for generic and
-OS-specific code) have more than two files. Such drivers tend to have
-their own directory under the drivers/scsi directory.
-
-
-scsi_module.c is normally included at the end of a lower
-level driver. For it to work a declaration like this is needed before
-it is included:
-
- static Scsi_Host_Template driver_template = DRIVER_TEMPLATE;
- /* DRIVER_TEMPLATE should contain pointers to supported interface
- functions. Scsi_Host_Template is defined hosts.h */
- #include "scsi_module.c"
-
-
-
-The scsi_module.c assumes the name "driver_template" is appropriately
-defined. It contains 2 functions:
-
-
- init_this_scsi_driver() called during builtin and module driver
- initialization: invokes mid level's scsi_register_host()
-
-
- exit_this_scsi_driver() called during closedown: invokes
- mid level's scsi_unregister_host()
-
-
-
-
-When a new, lower level driver is being added to Linux, the following
-files (all found in the drivers/scsi directory) will need some attention:
-Makefile, Config.help and Config.in . It is probably best to look at what
-an existing lower level driver does in this regard.
-
-
-
-
- Interface Functions
-!EDocumentation/scsi/scsi_mid_low_api.txt
-
-
-
- Locks
-
-Each Scsi_Host instance has a spin_lock called Scsi_Host::default_lock
-which is initialized in scsi_register() [found in hosts.c]. Within the
-same function the Scsi_Host::host_lock pointer is initialized to point
-at default_lock with the scsi_assign_lock() function. Thereafter
-lock and unlock operations performed by the mid level use the
-Scsi_Host::host_lock pointer.
-
-
-Lower level drivers can override the use of Scsi_Host::default_lock by
-using scsi_assign_lock(). The earliest opportunity to do this would
-be in the detect() function after it has invoked scsi_register(). It
-could be replaced by a coarser grain lock (e.g. per driver) or a
-lock of equal granularity (i.e. per host). Using finer grain locks
-(e.g. per scsi device) may be possible by juggling locks in
-queuecommand().
-
-
-
-
- Changes since lk 2.4 series
-
-io_request_lock has been replaced by several finer grained locks. The lock
-relevant to lower level drivers is Scsi_Host::host_lock and there is one
-per scsi host.
-
-
-The older error handling mechanism has been removed. This means the
-lower level interface functions abort() and reset() have been removed.
-
-
-In the 2.4 series the scsi subsystem configuration descriptions were
-aggregated with the configuration descriptions from all other Linux
-subsystems in the Documentation/Configure.help file. In the 2.5 series,
-the scsi subsystem now has its own (much smaller) drivers/scsi/Config.help
-file.
-
-
-
-
- Credits
-
-The following people have contributed to this document:
-
-
-Mike Anderson andmike@us.ibm.com
-
-
-James Bottomley James.Bottomley@steeleye.com
-
-
-Patrick Mansfield patmans@us.ibm.com
-
-
-
-
-
-
diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches
index 9838d32b2fe70ac6cff1f1b6cd03785af00cab3b..4d35562b1cf976d7f63f7f555440686e44ae5db4 100644
--- a/Documentation/SubmittingPatches
+++ b/Documentation/SubmittingPatches
@@ -271,7 +271,7 @@ patch, which certifies that you wrote it or otherwise have the right to
pass it on as a open-source patch. The rules are pretty simple: if you
can certify the below:
- Developer's Certificate of Origin 1.0
+ Developer's Certificate of Origin 1.1
By making a contribution to this project, I certify that:
@@ -291,6 +291,12 @@ can certify the below:
person who certified (a), (b) or (c) and I have not modified
it.
+ (d) I understand and agree that this project and the contribution
+ are public and that a record of the contribution (including all
+ personal information I submit with it, including my sign-off) is
+ maintained indefinitely and may be redistributed consistent with
+ this project or the open source license(s) involved.
+
then you just add a line saying
Signed-off-by: Random J Developer
diff --git a/Documentation/cpu-freq/cpufreq-stats.txt b/Documentation/cpu-freq/cpufreq-stats.txt
new file mode 100644
index 0000000000000000000000000000000000000000..e2d1e760b4ba3bd382d2034286c429fe4e6979fe
--- /dev/null
+++ b/Documentation/cpu-freq/cpufreq-stats.txt
@@ -0,0 +1,128 @@
+
+ CPU frequency and voltage scaling statictics in the Linux(TM) kernel
+
+
+ L i n u x c p u f r e q - s t a t s d r i v e r
+
+ - information for users -
+
+
+ Venkatesh Pallipadi
+
+Contents
+1. Introduction
+2. Statistics Provided (with example)
+3. Configuring cpufreq-stats
+
+
+1. Introduction
+
+cpufreq-stats is a driver that provices CPU frequency statistics for each CPU.
+This statistics is provided in /sysfs as a bunch of read_only interfaces. This
+interface (when configured) will appear in a seperate directory under cpufreq
+in /sysfs (/devices/system/cpu/cpuX/cpufreq/stats/) for each CPU.
+Various statistics will form read_only files under this directory.
+
+This driver is designed to be independent of any particular cpufreq_driver
+that may be running on your CPU. So, it will work with any cpufreq_driver.
+
+
+2. Statistics Provided (with example)
+
+cpufreq stats provides following statistics (explained in detail below).
+- time_in_state
+- total_trans
+- trans_table
+
+All the statistics will be from the time the stats driver has been inserted
+to the time when a read of a particular statistic is done. Obviously, stats
+driver will not have any information about the the frequcny transitions before
+the stats driver insertion.
+
+--------------------------------------------------------------------------------
+:/sys/devices/system/cpu/cpu0/cpufreq/stats # ls -l
+total 0
+drwxr-xr-x 2 root root 0 May 14 16:06 .
+drwxr-xr-x 3 root root 0 May 14 15:58 ..
+-r--r--r-- 1 root root 4096 May 14 16:06 time_in_state
+-r--r--r-- 1 root root 4096 May 14 16:06 total_trans
+-r--r--r-- 1 root root 4096 May 14 16:06 trans_table
+--------------------------------------------------------------------------------
+
+- time_in_state
+This gives the amount of time spent in each of the frequencies supported by
+this CPU. The cat output will have " " pair in each line, which
+will mean this CPU spent usertime units of time at . Output
+will have one line for each of the supported freuencies. usertime units here
+is 10mS (similar to other time exported in /proc).
+
+--------------------------------------------------------------------------------
+:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat time_in_state
+3600000 2089
+3400000 136
+3200000 34
+3000000 67
+2800000 172488
+--------------------------------------------------------------------------------
+
+
+- total_trans
+This gives the total number of frequency transitions on this CPU. The cat
+output will have a single count which is the total number of frequency
+transitions.
+
+--------------------------------------------------------------------------------
+:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat total_trans
+20
+--------------------------------------------------------------------------------
+
+- trans_table
+This will give a fine grained information about all the CPU frequency
+transitions. The cat output here is a two dimensional matrix, where an entry
+ (row i, column j) represents the count of number of transitions from
+Freq_i to Freq_j. Freq_i is in descending order with increasing rows and
+Freq_j is in descending order with increasing columns. The output here also
+contains the actual freq values for each row and column for better readability.
+
+--------------------------------------------------------------------------------
+:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat trans_table
+ From : To
+ : 3600000 3400000 3200000 3000000 2800000
+ 3600000: 0 5 0 0 0
+ 3400000: 4 0 2 0 0
+ 3200000: 0 1 0 2 0
+ 3000000: 0 0 1 0 3
+ 2800000: 0 0 0 2 0
+--------------------------------------------------------------------------------
+
+
+3. Configuring cpufreq-stats
+
+To configure cpufreq-stats in your kernel
+Config Main Menu
+ Power management options (ACPI, APM) --->
+ CPU Frequency scaling --->
+ [*] CPU Frequency scaling
+ <*> CPU frequency translation statistics
+ [*] CPU frequency translation statistics details
+
+
+"CPU Frequency scaling" (CONFIG_CPU_FREQ) should be enabled to configure
+cpufreq-stats.
+
+"CPU frequency translation statistics" (CONFIG_CPU_FREQ_STAT) provides the
+basic statistics which includes time_in_state and total_trans.
+
+"CPU frequency translation statistics details" (CONFIG_CPU_FREQ_STAT_DETAILS)
+provides fine grained cpufreq stats by trans_table. The reason for having a
+seperate config option for trans_table is:
+- trans_table goes against the traditional /sysfs rule of one value per
+ interface. It provides a whole bunch of value in a 2 dimensional matrix
+ form.
+
+Once these two options are enabled and your CPU supports cpufrequency, you
+will be able to see the CPU frequency statistics in /sysfs.
+
+
+
+
diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt
index 1ad26d2c20ae61e0fabafefdee24ef5bb35b50e0..2f8f24eaefd9ac746f8a1e98b6e2c99abcc23b58 100644
--- a/Documentation/cpusets.txt
+++ b/Documentation/cpusets.txt
@@ -252,8 +252,7 @@ in a tasks processor placement.
There is an exception to the above. If hotplug funtionality is used
to remove all the CPUs that are currently assigned to a cpuset,
then the kernel will automatically update the cpus_allowed of all
-tasks attached to CPUs in that cpuset with the online CPUs of the
-nearest parent cpuset that still has some CPUs online. When memory
+tasks attached to CPUs in that cpuset to allow all CPUs. When memory
hotplug functionality for removing Memory Nodes is available, a
similar exception is expected to apply there as well. In general,
the kernel prefers to violate cpuset placement, over starving a task
diff --git a/Documentation/driver-model/device.txt b/Documentation/driver-model/device.txt
index 58cc5dc8fd3eac2f8851674db7909d0f56c32f79..a05ec50f8004dd65f29c87579612389f93660187 100644
--- a/Documentation/driver-model/device.txt
+++ b/Documentation/driver-model/device.txt
@@ -76,6 +76,14 @@ driver_data: Driver-specific data.
platform_data: Platform data specific to the device.
+ Example: for devices on custom boards, as typical of embedded
+ and SOC based hardware, Linux often uses platform_data to point
+ to board-specific structures describing devices and how they
+ are wired. That can include what ports are available, chip
+ variants, which GPIO pins act in what additional roles, and so
+ on. This shrinks the "Board Support Packages" (BSPs) and
+ minimizes board-specific #ifdefs in drivers.
+
current_state: Current power state of the device.
saved_state: Pointer to saved state of the device. This is usable by
diff --git a/Documentation/driver-model/driver.txt b/Documentation/driver-model/driver.txt
index 6031a68dd3f5c249ea5daf391948d058fda44fef..fabaca1ab1b0b0f56980a4802b81b7a11e1aa241 100644
--- a/Documentation/driver-model/driver.txt
+++ b/Documentation/driver-model/driver.txt
@@ -5,21 +5,17 @@ struct device_driver {
char * name;
struct bus_type * bus;
- rwlock_t lock;
- atomic_t refcount;
-
- list_t bus_list;
+ struct completion unloaded;
+ struct kobject kobj;
list_t devices;
- struct driver_dir_entry dir;
+ struct module *owner;
int (*probe) (struct device * dev);
int (*remove) (struct device * dev);
int (*suspend) (struct device * dev, pm_message_t state, u32 level);
int (*resume) (struct device * dev, u32 level);
-
- void (*release) (struct device_driver * drv);
};
@@ -51,7 +47,6 @@ being converted completely to the new model.
static struct device_driver eepro100_driver = {
.name = "eepro100",
.bus = &pci_bus_type,
- .devclass = ðernet_devclass, /* when it's implemented */
.probe = eepro100_probe,
.remove = eepro100_remove,
@@ -85,7 +80,6 @@ static struct pci_driver eepro100_driver = {
.driver = {
.name = "eepro100",
.bus = &pci_bus_type,
- .devclass = ðernet_devclass, /* when it's implemented */
.probe = eepro100_probe,
.remove = eepro100_remove,
.suspend = eepro100_suspend,
@@ -166,27 +160,32 @@ Callbacks
int (*probe) (struct device * dev);
-probe is called to verify the existence of a certain type of
-hardware. This is called during the driver binding process, after the
-bus has verified that the device ID of a device matches one of the
-device IDs supported by the driver.
-
-This callback only verifies that there actually is supported hardware
-present. It may allocate a driver-specific structure, but it should
-not do any initialization of the hardware itself. The device-specific
-structure may be stored in the device's driver_data field.
-
- int (*init) (struct device * dev);
-
-init is called during the binding stage. It is called after probe has
-successfully returned and the device has been registered with its
-class. It is responsible for initializing the hardware.
+The probe() entry is called in task context, with the bus's rwsem locked
+and the driver partially bound to the device. Drivers commonly use
+container_of() to convert "dev" to a bus-specific type, both in probe()
+and other routines. That type often provides device resource data, such
+as pci_dev.resource[] or platform_device.resources, which is used in
+addition to dev->platform_data to initialize the driver.
+
+This callback holds the driver-specific logic to bind the driver to a
+given device. That includes verifying that the device is present, that
+it's a version the driver can handle, that driver data structures can
+be allocated and initialized, and that any hardware can be initialized.
+Drivers often store a pointer to their state with dev_set_drvdata().
+When the driver has successfully bound itself to that device, then probe()
+returns zero and the driver model code will finish its part of binding
+the driver to that device.
+
+A driver's probe() may return a negative errno value to indicate that
+the driver did not bind to this device, in which case it should have
+released all reasources it allocated.
int (*remove) (struct device * dev);
-remove is called to dissociate a driver with a device. This may be
+remove is called to unbind a driver from a device. This may be
called if a device is physically removed from the system, if the
-driver module is being unloaded, or during a reboot sequence.
+driver module is being unloaded, during a reboot sequence, or
+in other cases.
It is up to the driver to determine if the device is present or
not. It should free any resources allocated specifically for the
diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop
new file mode 100644
index 0000000000000000000000000000000000000000..a50c70f9ca7208d90df90f247cf7d38110272163
--- /dev/null
+++ b/Documentation/dvb/README.flexcop
@@ -0,0 +1,205 @@
+This README escorted the skystar2-driver rewriting procedure. It describes the
+state of the new flexcop-driver set and some internals are written down here
+too.
+
+This document hopefully describes things about the flexcop and its
+device-offsprings. Goal was to write an easy-to-write and easy-to-read set of
+drivers based on the skystar2.c and other information.
+
+Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been
+touched and rewritten.
+
+History & News
+==============
+ 2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana)
+
+
+
+
+General coding processing
+=========================
+
+We should proceed as follows (as long as no one complains):
+
+0) Think before start writing code!
+
+1) rewriting the skystar2.c with the help of the flexcop register descriptions
+and splitting up the files to a pci-bus-part and a flexcop-part.
+The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the
+device-specific part and b2c2-flexcop.ko for the common flexcop-functions.
+
+2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c
+and other pci drivers)
+
+3) make some beautification (see 'Improvements when rewriting (refactoring) is
+done')
+
+4) Testing the new driver and maybe substitute the skystar2.c with it, to reach
+a wider tester audience.
+
+5) creating an usb-bus-part using the already written flexcop code for the pci
+card.
+
+Idea: create a kernel-object for the flexcop and export all important
+functions. This option saves kernel-memory, but maybe a lot of functions have
+to be exported to kernel namespace.
+
+
+Current situation
+=================
+
+0) Done :)
+1) Done (some minor issues left)
+2) Done
+3) Not ready yet, more information is necessary
+4) next to be done (see the table below)
+5) USB driver is working (yes, there are some minor issues)
+
+What seems to be ready?
+-----------------------
+
+1) Rewriting
+1a) i2c is cut off from the flexcop-pci.c and seems to work
+1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c
+1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c
+1e) eeprom (reading MAC address)
+1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me))
+1f) misc. register accesses for reading parameters (e.g. resetting, revision)
+1g) pid/mac filter (flexcop-hw-filter.c)
+1i) dvb-stuff initialization in flexcop.c (done)
+1h) dma stuff (now just using the size-irq, instead of all-together, to be done)
+1j) remove flexcop initialization from flexcop-pci.c completely (done)
+1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO')
+1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from
+non-static where possible, moved code to proper places)
+
+2) Search for errors in the leftover of flexcop-pci.c (partially done)
+5a) add MAC address reading
+5c) feeding of ISOC data to the software demux (format of the isochronous data
+and speed optimization, no real error) (thanks to Vadim Catana)
+
+What to do in the near future?
+--------------------------------------
+(no special order here)
+
+5) USB driver
+5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting)
+
+Testing changes
+---------------
+
+O = item is working
+P = item is partially working
+X = item is not working
+N = item does not apply here
+ = item need to be examined
+
+ | PCI | USB
+item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312
+-------+-------+---------+---------+-------+-------+---------+---------+-------
+1a) | O | | | | N | N | N | N
+1b) | O | | | | | | O |
+1c) | N | N | | | N | N | O |
+1d) | O | O
+1e) | O | O
+1f) | P
+1g) | O
+1h) | P |
+1i) | O | N
+1j) | O | N
+1l) | O | N
+2) | O | N
+5a) | N | O
+5b)* | N |
+5c) | N | O
+
+* - not done yet
+
+Known bugs and problems and TODO
+--------------------------------
+
+1g/h/l) when pid filtering is enabled on the pci card
+
+DMA usage currently:
+ The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first
+ address and triggers an IRQ when it's full and starts writing to the second
+ address. When the second address is full, the IRQ is triggered again, and
+ the flexcop writes to first address again, and so on.
+ The buffersize of each address is currently 640*188 bytes.
+
+ Problem is, when using hw-pid-filtering and doing some low-bandwidth
+ operation (like scanning) the buffers won't be filled enough to trigger
+ the IRQ. That's why:
+
+ When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ
+ is triggered. Is the current write address of DMA1 different to the one
+ during the last IRQ, then the data is passed to the demuxer.
+
+ There is an additional DMA-IRQ-method: packet count IRQ. This isn't
+ implemented correctly yet.
+
+ The solution is to disable HW PID filtering, but I don't know how the DVB
+ API software demux behaves on slow systems with 45MBit/s TS.
+
+Solved bugs :)
+--------------
+1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't
+working)
+SOLUTION: also index 0 was affected, because net_translation is done for
+these indexes by default
+
+5b) isochronous transfer does only work in the first attempt (for the Sky2PC
+USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really
+woke up again (don't know if this need fixes, see
+flexcop-fe-tuner.c:flexcop_sleep)
+
+NEWS: when the driver is loaded and unloaded and loaded again (w/o doing
+anything in the while the driver is loaded the first time), no transfers take
+place anymore.
+
+Improvements when rewriting (refactoring) is done
+=================================================
+
+- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control
+ (enable sleeping for other demods than dvb-s)
+- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA)
+
+Debugging
+---------
+- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it
+ with this flexcop, this is important, because i2c is now using the
+ flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for
+ that, please tell us so).
+
+Everything which is identical in the following table, can be put into a common
+flexcop-module.
+
+ PCI USB
+-------------------------------------------------------------------------------
+Different:
+Register access: accessing IO memory USB control message
+I2C bus: I2C bus of the FC USB control message
+Data transfer: DMA isochronous transfer
+EEPROM transfer: through i2c bus not clear yet
+
+Identical:
+Streaming: accessing registers
+PID Filtering: accessing registers
+Sram destinations: accessing registers
+Tuner/Demod: I2C bus
+DVB-stuff: can be written for common use
+
+Acknowledgements (just for the rewriting part)
+================
+
+Bjarne Steinsbo thought a lot in the first place of the pci part for this code
+sharing idea.
+
+Andreas Oberritter for providing a recent PCI initialization template
+(pluto2.c).
+
+Boleslaw Ciesielski for pointing out a problem with firmware loader.
+
+Vadim Catana for correcting the USB transfer.
+
+comments, critics and ideas to linux-dvb@linuxtv.org.
diff --git a/Documentation/dvb/bt8xx.txt b/Documentation/dvb/bt8xx.txt
index e3cacf4f2345e48258317bc23925e66a757a4a53..d64430bf4bb6ec5d681c2f7c30cc71905a72bd67 100644
--- a/Documentation/dvb/bt8xx.txt
+++ b/Documentation/dvb/bt8xx.txt
@@ -17,74 +17,53 @@ Because of this, you need to enable
"Device drivers" => "Multimedia devices"
=> "Video For Linux" => "BT848 Video For Linux"
+Furthermore you need to enable
+"Device drivers" => "Multimedia devices" => "Digital Video Broadcasting Devices"
+ => "DVB for Linux" "DVB Core Support" "Nebula/Pinnacle PCTV/TwinHan PCI Cards"
+
2) Loading Modules
==================
In general you need to load the bttv driver, which will handle the gpio and
-i2c communication for us. Next you need the common dvb-bt8xx device driver
-and one frontend driver.
-
-The bttv driver will HANG YOUR SYSTEM IF YOU DO NOT SPECIFY THE CORRECT
-CARD ID!
-
-(If you don't get your card running and you suspect that the card id you're
-using is wrong, have a look at "bttv-cards.c" for a list of possible card
-ids.)
-
-Pay attention to failures when you load the frontend drivers
-(e.g. dmesg, /var/log/messages).
+i2c communication for us, plus the common dvb-bt8xx device driver.
+The frontends for Nebula (nxt6000), Pinnacle PCTV (cx24110) and
+TwinHan (dst) are loaded automatically by the dvb-bt8xx device driver.
3a) Nebula / Pinnacle PCTV
--------------------------
- $ modprobe bttv i2c_hw=1 card=0x68
- $ modprobe dvb-bt8xx
-
-For Nebula cards use the "nxt6000" frontend driver:
- $ modprobe nxt6000
+ $ modprobe bttv (normally bttv is being loaded automatically by kmod)
+ $ modprobe dvb-bt8xx (or just place dvb-bt8xx in /etc/modules for automatic loading)
-For Pinnacle PCTV cards use the "cx24110" frontend driver:
- $ modprobe cx24110
-3b) TwinHan
------------
+3b) TwinHan and Clones
+--------------------------
$ modprobe bttv i2c_hw=1 card=0x71
$ modprobe dvb-bt8xx
$ modprobe dst
-The value 0x71 will override the PCI type detection for dvb-bt8xx, which
-is necessary for TwinHan cards.#
+The value 0x71 will override the PCI type detection for dvb-bt8xx,
+which is necessary for TwinHan cards.
-If you're having an older card (blue color circuit) and card=0x71 locks your
-machine, try using 0x68, too. If that does not work, ask on the DVB mailing list.
+If you're having an older card (blue color circuit) and card=0x71 locks
+your machine, try using 0x68, too. If that does not work, ask on the
+mailing list.
-The DST module takes a couple of useful parameters, in case the
-dst drivers fails to detect your type of card correctly.
+The DST module takes a couple of useful parameters.
-dst_type takes values 0 (satellite), 1 (terrestial TV), 2 (cable).
+verbose takes values 0 to 5. These values control the verbosity level.
-dst_type_flags takes bit combined values:
-1 = new tuner type packets. You can use this if your card is detected
- and you have debug and you continually see the tuner packets not
- working (make sure not a basic problem like dish alignment etc.)
+debug takes values 0 and 1. You can either disable or enable debugging.
-2 = TS 204. If your card tunes OK, but the picture is terrible, seemingly
- breaking up in one half continually, and crc fails a lot, then
- this is worth a try (or trying to turn off)
+dst_addons takes values 0 and 0x20. A value of 0 means it is a FTA card.
+0x20 means it has a Conditional Access slot.
-4 = has symdiv. Some cards, mostly without new tuner packets, require
- a symbol division algorithm. Doesn't apply to terrestial TV.
-
-You can also specify a value to have the autodetected values turned off
-(e.g. 0). The autodected values are determined bythe cards 'response
+The autodected values are determined bythe cards 'response
string' which you can see in your logs e.g.
-dst_check_ci: recognize DST-MOT
-
-or
+dst_get_device_id: Recognise [DSTMCI]
-dst_check_ci: unable to recognize DSTXCI or STXCI
--
-Authors: Richard Walker, Jamie Honan, Michael Hunold
+Authors: Richard Walker, Jamie Honan, Michael Hunold, Manu Abraham
diff --git a/Documentation/dvb/ci.txt b/Documentation/dvb/ci.txt
new file mode 100644
index 0000000000000000000000000000000000000000..62e0701b542af416092a6a4aa8cafe6f1b04f008
--- /dev/null
+++ b/Documentation/dvb/ci.txt
@@ -0,0 +1,219 @@
+* For the user
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+NOTE: This document describes the usage of the high level CI API as
+in accordance to the Linux DVB API. This is a not a documentation for the,
+existing low level CI API.
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+To utilize the High Level CI capabilities,
+
+(1*) This point is valid only for the Twinhan/clones
+ For the Twinhan/Twinhan clones, the dst_ca module handles the CI
+ hardware handling.This module is loaded automatically if a CI
+ (Common Interface, that holds the CAM (Conditional Access Module)
+ is detected.
+
+(2) one requires a userspace application, ca_zap. This small userland
+ application is in charge of sending the descrambling related information
+ to the CAM.
+
+This application requires the following to function properly as of now.
+
+ (a) Tune to a valid channel, with szap.
+ eg: $ szap -c channels.conf -r "TMC" -x
+
+ (b) a channels.conf containing a valid PMT PID
+
+ eg: TMC:11996:h:0:27500:278:512:650:321
+
+ here 278 is a valid PMT PID. the rest of the values are the
+ same ones that szap uses.
+
+ (c) after running a szap, you have to run ca_zap, for the
+ descrambler to function,
+
+ eg: $ ca_zap patched_channels.conf "TMC"
+
+ The patched means a patch to apply to scan, such that scan can
+ generate a channels.conf_with pmt, which has this PMT PID info
+ (NOTE: szap cannot use this channels.conf with the PMT_PID)
+
+
+ (d) Hopeflly Enjoy your favourite subscribed channel as you do with
+ a FTA card.
+
+(3) Currently ca_zap, and dst_test, both are meant for demonstration
+ purposes only, they can become full fledged applications if necessary.
+
+
+* Cards that fall in this category
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+At present the cards that fall in this category are the Twinhan and it's
+clones, these cards are available as VVMER, Tomato, Hercules, Orange and
+so on.
+
+* CI modules that are supported
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+The CI module support is largely dependant upon the firmware on the cards
+Some cards do support almost all of the available CI modules. There is
+nothing much that can be done in order to make additional CI modules
+working with these cards.
+
+Modules that have been tested by this driver at present are
+
+(1) Irdeto 1 and 2 from SCM
+(2) Viaccess from SCM
+(3) Dragoncam
+
+* The High level CI API
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+* For the programmer
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+With the High Level CI approach any new card with almost any random
+architecture can be implemented with this style, the definitions
+insidethe switch statement can be easily adapted for any card, thereby
+eliminating the need for any additional ioctls.
+
+The disadvantage is that the driver/hardware has to manage the rest. For
+the application programmer it would be as simple as sending/receiving an
+array to/from the CI ioctls as defined in the Linux DVB API. No changes
+have been made in the API to accomodate this feature.
+
+
+* Why the need for another CI interface ?
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+This is one of the most commonly asked question. Well a nice question.
+Strictly speaking this is not a new interface.
+
+The CI interface is defined in the DVB API in ca.h as
+
+typedef struct ca_slot_info {
+ int num; /* slot number */
+
+ int type; /* CA interface this slot supports */
+#define CA_CI 1 /* CI high level interface */
+#define CA_CI_LINK 2 /* CI link layer level interface */
+#define CA_CI_PHYS 4 /* CI physical layer level interface */
+#define CA_DESCR 8 /* built-in descrambler */
+#define CA_SC 128 /* simple smart card interface */
+
+ unsigned int flags;
+#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */
+#define CA_CI_MODULE_READY 2
+} ca_slot_info_t;
+
+
+
+This CI interface follows the CI high level interface, which is not
+implemented by most applications. Hence this area is revisited.
+
+This CI interface is quite different in the case that it tries to
+accomodate all other CI based devices, that fall into the other categories
+
+This means that this CI interface handles the EN50221 style tags in the
+Application layer only and no session management is taken care of by the
+application. The driver/hardware will take care of all that.
+
+This interface is purely an EN50221 interface exchanging APDU's. This
+means that no session management, link layer or a transport layer do
+exist in this case in the application to driver communication. It is
+as simple as that. The driver/hardware has to take care of that.
+
+
+With this High Level CI interface, the interface can be defined with the
+regular ioctls.
+
+All these ioctls are also valid for the High level CI interface
+
+#define CA_RESET _IO('o', 128)
+#define CA_GET_CAP _IOR('o', 129, ca_caps_t)
+#define CA_GET_SLOT_INFO _IOR('o', 130, ca_slot_info_t)
+#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t)
+#define CA_GET_MSG _IOR('o', 132, ca_msg_t)
+#define CA_SEND_MSG _IOW('o', 133, ca_msg_t)
+#define CA_SET_DESCR _IOW('o', 134, ca_descr_t)
+#define CA_SET_PID _IOW('o', 135, ca_pid_t)
+
+
+On querying the device, the device yields information thus
+
+CA_GET_SLOT_INFO
+----------------------------
+Command = [info]
+APP: Number=[1]
+APP: Type=[1]
+APP: flags=[1]
+APP: CI High level interface
+APP: CA/CI Module Present
+
+CA_GET_CAP
+----------------------------
+Command = [caps]
+APP: Slots=[1]
+APP: Type=[1]
+APP: Descrambler keys=[16]
+APP: Type=[1]
+
+CA_SEND_MSG
+----------------------------
+Descriptors(Program Level)=[ 09 06 06 04 05 50 ff f1]
+Found CA descriptor @ program level
+
+(20) ES type=[2] ES pid=[201] ES length =[0 (0x0)]
+(25) ES type=[4] ES pid=[301] ES length =[0 (0x0)]
+ca_message length is 25 (0x19) bytes
+EN50221 CA MSG=[ 9f 80 32 19 03 01 2d d1 f0 08 01 09 06 06 04 05 50 ff f1 02 e0 c9 00 00 04 e1 2d 00 00]
+
+
+Not all ioctl's are implemented in the driver from the API, the other
+features of the hardware that cannot be implemented by the API are achieved
+using the CA_GET_MSG and CA_SEND_MSG ioctls. An EN50221 style wrapper is
+used to exchange the data to maintain compatibility with other hardware.
+
+
+/* a message to/from a CI-CAM */
+typedef struct ca_msg {
+ unsigned int index;
+ unsigned int type;
+ unsigned int length;
+ unsigned char msg[256];
+} ca_msg_t;
+
+
+The flow of data can be described thus,
+
+
+
+
+
+ App (User)
+ -----
+ parse
+ |
+ |
+ v
+ en50221 APDU (package)
+ --------------------------------------
+ | | | High Level CI driver
+ | | |
+ | v |
+ | en50221 APDU (unpackage) |
+ | | |
+ | | |
+ | v |
+ | sanity checks |
+ | | |
+ | | |
+ | v |
+ | do (H/W dep) |
+ --------------------------------------
+ | Hardware
+ |
+ v
+
+
+
+
+The High Level CI interface uses the EN50221 DVB standard, following a
+standard ensures futureproofness.
diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware
index 3ffdcb394299f43b65f50c7df3898281504fd32c..a750f0101d9de7d15f47a13e0cc7240b3299ba1f 100644
--- a/Documentation/dvb/get_dvb_firmware
+++ b/Documentation/dvb/get_dvb_firmware
@@ -107,7 +107,7 @@ sub tda10045 {
sub tda10046 {
my $sourcefile = "tt_budget_217g.zip";
my $url = "http://www.technotrend.de/new/217g/$sourcefile";
- my $hash = "a25b579e37109af60f4a36c37893957c";
+ my $hash = "6a7e1e2f2644b162ff0502367553c72d";
my $outfile = "dvb-fe-tda10046.fw";
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@@ -115,7 +115,7 @@ sub tda10046 {
wgetfile($sourcefile, $url);
unzip($sourcefile, $tmpdir);
- extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x3f731, 24479, "$tmpdir/fwtmp");
+ extract("$tmpdir/software/OEM/PCI/App/ttlcdacc.dll", 0x3f731, 24478, "$tmpdir/fwtmp");
verify("$tmpdir/fwtmp", $hash);
copy("$tmpdir/fwtmp", $outfile);
diff --git a/Documentation/fb/intelfb.txt b/Documentation/fb/intelfb.txt
new file mode 100644
index 0000000000000000000000000000000000000000..c12d39a23c3d1b43827f2fe37a1b1776036db2d1
--- /dev/null
+++ b/Documentation/fb/intelfb.txt
@@ -0,0 +1,135 @@
+Intel 830M/845G/852GM/855GM/865G/915G Framebuffer driver
+================================================================
+
+A. Introduction
+ This is a framebuffer driver for various Intel 810/815 compatible
+graphics devices. These would include:
+
+ Intel 830M
+ Intel 810E845G
+ Intel 852GM
+ Intel 855GM
+ Intel 865G
+ Intel 915G
+
+B. List of available options
+
+ a. "video=intelfb"
+ enables the intelfb driver
+
+ Recommendation: required
+
+ b. "mode=x[-][@]"
+ select mode
+
+ Recommendation: user preference
+ (default = 1024x768-32@70)
+
+ c. "vram="
+ select amount of system RAM in MB to allocate for the video memory
+ if not enough RAM was already allocated by the BIOS.
+
+ Recommendation: 1 - 4 MB.
+ (default = 4 MB)
+
+ d. "voffset="
+ select at what offset in MB of the logical memory to allocate the
+ framebuffer memory. The intent is to avoid the memory blocks
+ used by standard graphics applications (XFree86). Depending on your
+ usage, adjust the value up or down, (0 for maximum usage, 63/127 MB
+ for the least amount). Note, an arbitrary setting may conflict
+ with XFree86.
+
+ Recommendation: do not set
+ (default = 48 MB)
+
+ e. "accel"
+ enable text acceleration. This can be enabled/reenabled anytime
+ by using 'fbset -accel true/false'.
+
+ Recommendation: enable
+ (default = set)
+
+ f. "hwcursor"
+ enable cursor acceleration.
+
+ Recommendation: enable
+ (default = set)
+
+ g. "mtrr"
+ enable MTRR. This allows data transfers to the framebuffer memory
+ to occur in bursts which can significantly increase performance.
+ Not very helpful with the intel chips because of 'shared memory'.
+
+ Recommendation: set
+ (default = set)
+
+ h. "fixed"
+ disable mode switching.
+
+ Recommendation: do not set
+ (default = not set)
+
+ The binary parameters can be unset with a "no" prefix, example "noaccel".
+ The default parameter (not named) is the mode.
+
+C. Kernel booting
+
+Separate each option/option-pair by commas (,) and the option from its value
+with an equals sign (=) as in the following:
+
+video=i810fb:option1,option2=value2
+
+Sample Usage
+------------
+
+In /etc/lilo.conf, add the line:
+
+append="video=intelfb:800x600-32@75,accel,hwcursor,vram=8"
+
+This will initialize the framebuffer to 800x600 at 32bpp and 75Hz. The
+framebuffer will use 8 MB of System RAM. hw acceleration of text and cursor
+will be enabled.
+
+D. Module options
+
+ The module parameters are essentially similar to the kernel
+parameters. The main difference is that you need to include a Boolean value
+(1 for TRUE, and 0 for FALSE) for those options which don't need a value.
+
+Example, to enable MTRR, include "mtrr=1".
+
+Sample Usage
+------------
+
+Using the same setup as described above, load the module like this:
+
+ modprobe intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1
+
+Or just add the following to /etc/modprobe.conf
+
+ options intelfb mode=800x600-32@75 vram=8 accel=1 hwcursor=1
+
+and just do a
+
+ modprobe intelfb
+
+
+E. Acknowledgment:
+
+ 1. Geert Uytterhoeven - his excellent howto and the virtual
+ framebuffer driver code made this possible.
+
+ 2. Jeff Hartmann for his agpgart code.
+
+ 3. David Dawes for his original kernel 2.4 code.
+
+ 4. The X developers. Insights were provided just by reading the
+ XFree86 source code.
+
+ 5. Antonino A. Daplas for his inspiring i810fb driver.
+
+ 6. Andrew Morton for his kernel patches maintenance.
+
+###########################
+Sylvain
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index d3c52dd24a2ae6f5a39d35d788c8831aa52f4b9c..26414bc87c6536d2015953cc6d6415719ac387ec 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -63,3 +63,33 @@ Why: Outside of Linux, the only implementations of anything even
people, who might be using implementations that I am not aware
of, to adjust to this upcoming change.
Who: Paul E. McKenney
+
+---------------------------
+
+What: IEEE1394 Audio and Music Data Transmission Protocol driver,
+ Connection Management Procedures driver
+When: November 2005
+Files: drivers/ieee1394/{amdtp,cmp}*
+Why: These are incomplete, have never worked, and are better implemented
+ in userland via raw1394 (see http://freebob.sourceforge.net/ for
+ example.)
+Who: Jody McIntyre
+
+---------------------------
+
+What: raw1394: requests of type RAW1394_REQ_ISO_SEND, RAW1394_REQ_ISO_LISTEN
+When: November 2005
+Why: Deprecated in favour of the new ioctl-based rawiso interface, which is
+ more efficient. You should really be using libraw1394 for raw1394
+ access anyway.
+Who: Jody McIntyre
+
+---------------------------
+
+What: i2c sysfs name change: in1_ref, vid deprecated in favour of cpu0_vid
+When: November 2005
+Files: drivers/i2c/chips/adm1025.c, drivers/i2c/chips/adm1026.c
+Why: Match the other drivers' name for the same function, duplicate names
+ will be available until removal of old names.
+Who: Grant Coady
+
diff --git a/Documentation/filesystems/isofs.txt b/Documentation/filesystems/isofs.txt
index f64a10506689124943a5bdd9d1b43271d62b387c..424585ff6ea1c18daf7b9f47da97edd72b72dba1 100644
--- a/Documentation/filesystems/isofs.txt
+++ b/Documentation/filesystems/isofs.txt
@@ -26,7 +26,11 @@ Mount options unique to the isofs filesystem.
mode=xxx Sets the permissions on files to xxx
nojoliet Ignore Joliet extensions if they are present.
norock Ignore Rock Ridge extensions if they are present.
- unhide Show hidden files.
+ hide Completely strip hidden files from the file system.
+ showassoc Show files marked with the 'associated' bit
+ unhide Deprecated; showing hidden files is now default;
+ If given, it is a synonym for 'showassoc' which will
+ recreate previous unhide behavior
session=x Select number of session on multisession CD
sbsector=xxx Session begins from sector xxx
diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt
index e97d024eae77e5fa9f1ac338074a24baf42680e5..988a62fae11f883b8b2ba14ba95d83490a3fc5a1 100644
--- a/Documentation/filesystems/sysfs-pci.txt
+++ b/Documentation/filesystems/sysfs-pci.txt
@@ -7,7 +7,6 @@ that support it. For example, a given bus might look like this:
|-- 0000:17:00.0
| |-- class
| |-- config
- | |-- detach_state
| |-- device
| |-- irq
| |-- local_cpus
@@ -19,7 +18,7 @@ that support it. For example, a given bus might look like this:
| |-- subsystem_device
| |-- subsystem_vendor
| `-- vendor
- `-- detach_state
+ `-- ...
The topmost element describes the PCI domain and bus number. In this case,
the domain number is 0000 and the bus number is 17 (both values are in hex).
@@ -31,7 +30,6 @@ files, each with their own function.
---- --------
class PCI class (ascii, ro)
config PCI config space (binary, rw)
- detach_state connection status (bool, rw)
device PCI device (ascii, ro)
irq IRQ number (ascii, ro)
local_cpus nearby CPU mask (cpumask, ro)
@@ -85,4 +83,4 @@ useful return codes should be provided.
Legacy resources are protected by the HAVE_PCI_LEGACY define. Platforms
wishing to support legacy functionality should define it and provide
-pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.
\ No newline at end of file
+pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 60f6c2c4d477968e2966eb152183fe1c71bc689b..dc276598a65a3784c4dd7d41470c41f288db9529 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -214,7 +214,7 @@ Other notes:
A very simple (and naive) implementation of a device attribute is:
-static ssize_t show_name(struct device * dev, char * buf)
+static ssize_t show_name(struct device *dev, struct device_attribute *attr, char *buf)
{
return sprintf(buf,"%s\n",dev->name);
}
diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt
index 417e3095fe39a65f054ece975d01e68d99d0c018..0d783c504eade32e666e7a19b6fa89f85bfb9416 100644
--- a/Documentation/filesystems/tmpfs.txt
+++ b/Documentation/filesystems/tmpfs.txt
@@ -71,8 +71,8 @@ can be changed on remount. The size parameter also accepts a suffix %
to limit this tmpfs instance to that percentage of your physical RAM:
the default, when neither size nor nr_blocks is specified, is size=50%
-If both nr_blocks (or size) and nr_inodes are set to 0, neither blocks
-nor inodes will be limited in that instance. It is generally unwise to
+If nr_blocks=0 (or size=0), blocks will not be limited in that instance;
+if nr_inodes=0, inodes will not be limited. It is generally unwise to
mount with such options, since it allows any user with write access to
use up all the memory on the machine; but enhances the scalability of
that instance in a system with many cpus making intensive use of it.
@@ -97,4 +97,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root.
Author:
Christoph Rohland , 1.12.01
Updated:
- Hugh Dickins , 01 September 2004
+ Hugh Dickins , 13 March 2005
diff --git a/Documentation/i2c/busses/i2c-sis69x b/Documentation/i2c/busses/i2c-sis69x
index 5be48769f65bdd0627b97d58ced690992b6e7ad0..b88953dfd58022aef1680c266c7438605b146fc8 100644
--- a/Documentation/i2c/busses/i2c-sis69x
+++ b/Documentation/i2c/busses/i2c-sis69x
@@ -42,7 +42,7 @@ I suspect that this driver could be made to work for the following SiS
chipsets as well: 635, and 635T. If anyone owns a board with those chips
AND is willing to risk crashing & burning an otherwise well-behaved kernel
in the name of progress... please contact me at or
-via the project's mailing list: . Please
+via the project's mailing list: . Please
send bug reports and/or success stories as well.
diff --git a/Documentation/i2c/chips/adm1021 b/Documentation/i2c/chips/adm1021
new file mode 100644
index 0000000000000000000000000000000000000000..03d02bfb3df13a8f7f06859f8669de4a905bcc88
--- /dev/null
+++ b/Documentation/i2c/chips/adm1021
@@ -0,0 +1,111 @@
+Kernel driver adm1021
+=====================
+
+Supported chips:
+ * Analog Devices ADM1021
+ Prefix: 'adm1021'
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+ Datasheet: Publicly available at the Analog Devices website
+ * Analog Devices ADM1021A/ADM1023
+ Prefix: 'adm1023'
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+ Datasheet: Publicly available at the Analog Devices website
+ * Genesys Logic GL523SM
+ Prefix: 'gl523sm'
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+ Datasheet:
+ * Intel Xeon Processor
+ Prefix: - any other - may require 'force_adm1021' parameter
+ Addresses scanned: none
+ Datasheet: Publicly available at Intel website
+ * Maxim MAX1617
+ Prefix: 'max1617'
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+ Datasheet: Publicly available at the Maxim website
+ * Maxim MAX1617A
+ Prefix: 'max1617a'
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+ Datasheet: Publicly available at the Maxim website
+ * National Semiconductor LM84
+ Prefix: 'lm84'
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+ Datasheet: Publicly available at the National Semiconductor website
+ * Philips NE1617
+ Prefix: 'max1617' (probably detected as a max1617)
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+ Datasheet: Publicly available at the Philips website
+ * Philips NE1617A
+ Prefix: 'max1617' (probably detected as a max1617)
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+ Datasheet: Publicly available at the Philips website
+ * TI THMC10
+ Prefix: 'thmc10'
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+ Datasheet: Publicly available at the TI website
+ * Onsemi MC1066
+ Prefix: 'mc1066'
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+ Datasheet: Publicly available at the Onsemi website
+
+
+Authors:
+ Frodo Looijaard ,
+ Philip Edelbrock
+
+Module Parameters
+-----------------
+
+* read_only: int
+ Don't set any values, read only mode
+
+
+Description
+-----------
+
+The chips supported by this driver are very similar. The Maxim MAX1617 is
+the oldest; it has the problem that it is not very well detectable. The
+MAX1617A solves that. The ADM1021 is a straight clone of the MAX1617A.
+Ditto for the THMC10. From here on, we will refer to all these chips as
+ADM1021-clones.
+
+The ADM1021 and MAX1617A reports a die code, which is a sort of revision
+code. This can help us pinpoint problems; it is not very useful
+otherwise.
+
+ADM1021-clones implement two temperature sensors. One of them is internal,
+and measures the temperature of the chip itself; the other is external and
+is realised in the form of a transistor-like device. A special alarm
+indicates whether the remote sensor is connected.
+
+Each sensor has its own low and high limits. When they are crossed, the
+corresponding alarm is set and remains on as long as the temperature stays
+out of range. Temperatures are measured in degrees Celsius. Measurements
+are possible between -65 and +127 degrees, with a resolution of one degree.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may already
+have disappeared!
+
+This driver only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values. It is possible to make
+ADM1021-clones do faster measurements, but there is really no good reason
+for that.
+
+Xeon support
+------------
+
+Some Xeon processors have real max1617, adm1021, or compatible chips
+within them, with two temperature sensors.
+
+Other Xeons have chips with only one sensor.
+
+If you have a Xeon, and the adm1021 module loads, and both temperatures
+appear valid, then things are good.
+
+If the adm1021 module doesn't load, you should try this:
+ modprobe adm1021 force_adm1021=BUS,ADDRESS
+ ADDRESS can only be 0x18, 0x1a, 0x29, 0x2b, 0x4c, or 0x4e.
+
+If you have dual Xeons you may have appear to have two separate
+adm1021-compatible chips, or two single-temperature sensors, at distinct
+addresses.
diff --git a/Documentation/i2c/chips/adm1025 b/Documentation/i2c/chips/adm1025
new file mode 100644
index 0000000000000000000000000000000000000000..39d2b781b5d6144f5f46eff8a5a873b908be044d
--- /dev/null
+++ b/Documentation/i2c/chips/adm1025
@@ -0,0 +1,51 @@
+Kernel driver adm1025
+=====================
+
+Supported chips:
+ * Analog Devices ADM1025, ADM1025A
+ Prefix: 'adm1025'
+ Addresses scanned: I2C 0x2c - 0x2e
+ Datasheet: Publicly available at the Analog Devices website
+ * Philips NE1619
+ Prefix: 'ne1619'
+ Addresses scanned: I2C 0x2c - 0x2d
+ Datasheet: Publicly available at the Philips website
+
+The NE1619 presents some differences with the original ADM1025:
+ * Only two possible addresses (0x2c - 0x2d).
+ * No temperature offset register, but we don't use it anyway.
+ * No INT mode for pin 16. We don't play with it anyway.
+
+Authors:
+ Chen-Yuan Wu ,
+ Jean Delvare
+
+Description
+-----------
+
+(This is from Analog Devices.) The ADM1025 is a complete system hardware
+monitor for microprocessor-based systems, providing measurement and limit
+comparison of various system parameters. Five voltage measurement inputs
+are provided, for monitoring +2.5V, +3.3V, +5V and +12V power supplies and
+the processor core voltage. The ADM1025 can monitor a sixth power-supply
+voltage by measuring its own VCC. One input (two pins) is dedicated to a
+remote temperature-sensing diode and an on-chip temperature sensor allows
+ambient temperature to be monitored.
+
+One specificity of this chip is that the pin 11 can be hardwired in two
+different manners. It can act as the +12V power-supply voltage analog
+input, or as the a fifth digital entry for the VID reading (bit 4). It's
+kind of strange since both are useful, and the reason for designing the
+chip that way is obscure at least to me. The bit 5 of the configuration
+register can be used to define how the chip is hardwired. Please note that
+it is not a choice you have to make as the user. The choice was already
+made by your motherboard's maker. If the configuration bit isn't set
+properly, you'll have a wrong +12V reading or a wrong VID reading. The way
+the driver handles that is to preserve this bit through the initialization
+process, assuming that the BIOS set it up properly beforehand. If it turns
+out not to be true in some cases, we'll provide a module parameter to force
+modes.
+
+This driver also supports the ADM1025A, which differs from the ADM1025
+only in that it has "open-drain VID inputs while the ADM1025 has on-chip
+100k pull-ups on the VID inputs". It doesn't make any difference for us.
diff --git a/Documentation/i2c/chips/adm1026 b/Documentation/i2c/chips/adm1026
new file mode 100644
index 0000000000000000000000000000000000000000..473c689d79245761ae3c1ba353391f9277222656
--- /dev/null
+++ b/Documentation/i2c/chips/adm1026
@@ -0,0 +1,93 @@
+Kernel driver adm1026
+=====================
+
+Supported chips:
+ * Analog Devices ADM1026
+ Prefix: 'adm1026'
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+ Datasheet: Publicly available at the Analog Devices website
+ http://www.analog.com/en/prod/0,,766_825_ADM1026,00.html
+
+Authors:
+ Philip Pokorny for Penguin Computing
+ Justin Thiessen
+
+Module Parameters
+-----------------
+
+* gpio_input: int array (min = 1, max = 17)
+ List of GPIO pins (0-16) to program as inputs
+* gpio_output: int array (min = 1, max = 17)
+ List of GPIO pins (0-16) to program as outputs
+* gpio_inverted: int array (min = 1, max = 17)
+ List of GPIO pins (0-16) to program as inverted
+* gpio_normal: int array (min = 1, max = 17)
+ List of GPIO pins (0-16) to program as normal/non-inverted
+* gpio_fan: int array (min = 1, max = 8)
+ List of GPIO pins (0-7) to program as fan tachs
+
+
+Description
+-----------
+
+This driver implements support for the Analog Devices ADM1026. Analog
+Devices calls it a "complete thermal system management controller."
+
+The ADM1026 implements three (3) temperature sensors, 17 voltage sensors,
+16 general purpose digital I/O lines, eight (8) fan speed sensors (8-bit),
+an analog output and a PWM output along with limit, alarm and mask bits for
+all of the above. There is even 8k bytes of EEPROM memory on chip.
+
+Temperatures are measured in degrees Celsius. There are two external
+sensor inputs and one internal sensor. Each sensor has a high and low
+limit. If the limit is exceeded, an interrupt (#SMBALERT) can be
+generated. The interrupts can be masked. In addition, there are over-temp
+limits for each sensor. If this limit is exceeded, the #THERM output will
+be asserted. The current temperature and limits have a resolution of 1
+degree.
+
+Fan rotation speeds are reported in RPM (rotations per minute) but measured
+in counts of a 22.5kHz internal clock. Each fan has a high limit which
+corresponds to a minimum fan speed. If the limit is exceeded, an interrupt
+can be generated. Each fan can be programmed to divide the reference clock
+by 1, 2, 4 or 8. Not all RPM values can accurately be represented, so some
+rounding is done. With a divider of 8, the slowest measurable speed of a
+two pulse per revolution fan is 661 RPM.
+
+There are 17 voltage sensors. An alarm is triggered if the voltage has
+crossed a programmable minimum or maximum limit. Note that minimum in this
+case always means 'closest to zero'; this is important for negative voltage
+measurements. Several inputs have integrated attenuators so they can measure
+higher voltages directly. 3.3V, 5V, 12V, -12V and battery voltage all have
+dedicated inputs. There are several inputs scaled to 0-3V full-scale range
+for SCSI terminator power. The remaining inputs are not scaled and have
+a 0-2.5V full-scale range. A 2.5V or 1.82V reference voltage is provided
+for negative voltage measurements.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may already
+have disappeared! Note that in the current implementation, all hardware
+registers are read whenever any data is read (unless it is less than 2.0
+seconds since the last update). This means that you can easily miss
+once-only alarms.
+
+The ADM1026 measures continuously. Analog inputs are measured about 4
+times a second. Fan speed measurement time depends on fan speed and
+divisor. It can take as long as 1.5 seconds to measure all fan speeds.
+
+The ADM1026 has the ability to automatically control fan speed based on the
+temperature sensor inputs. Both the PWM output and the DAC output can be
+used to control fan speed. Usually only one of these two outputs will be
+used. Write the minimum PWM or DAC value to the appropriate control
+register. Then set the low temperature limit in the tmin values for each
+temperature sensor. The range of control is fixed at 20 °C, and the
+largest difference between current and tmin of the temperature sensors sets
+the control output. See the datasheet for several example circuits for
+controlling fan speed with the PWM and DAC outputs. The fan speed sensors
+do not have PWM compensation, so it is probably best to control the fan
+voltage from the power lead rather than on the ground lead.
+
+The datasheet shows an example application with VID signals attached to
+GPIO lines. Unfortunately, the chip may not be connected to the VID lines
+in this way. The driver assumes that the chips *is* connected this way to
+get a VID voltage.
diff --git a/Documentation/i2c/chips/adm1031 b/Documentation/i2c/chips/adm1031
new file mode 100644
index 0000000000000000000000000000000000000000..130a38382b989771c33e9f8492eaca8f48f74f3d
--- /dev/null
+++ b/Documentation/i2c/chips/adm1031
@@ -0,0 +1,35 @@
+Kernel driver adm1031
+=====================
+
+Supported chips:
+ * Analog Devices ADM1030
+ Prefix: 'adm1030'
+ Addresses scanned: I2C 0x2c to 0x2e
+ Datasheet: Publicly available at the Analog Devices website
+ http://products.analog.com/products/info.asp?product=ADM1030
+
+ * Analog Devices ADM1031
+ Prefix: 'adm1031'
+ Addresses scanned: I2C 0x2c to 0x2e
+ Datasheet: Publicly available at the Analog Devices website
+ http://products.analog.com/products/info.asp?product=ADM1031
+
+Authors:
+ Alexandre d'Alton
+ Jean Delvare
+
+Description
+-----------
+
+The ADM1030 and ADM1031 are digital temperature sensors and fan controllers.
+They sense their own temperature as well as the temperature of up to one
+(ADM1030) or two (ADM1031) external diodes.
+
+All temperature values are given in degrees Celsius. Resolution is 0.5
+degree for the local temperature, 0.125 degree for the remote temperatures.
+
+Each temperature channel has its own high and low limits, plus a critical
+limit.
+
+The ADM1030 monitors a single fan speed, while the ADM1031 monitors up to
+two. Each fan channel has its own low speed limit.
diff --git a/Documentation/i2c/chips/adm9240 b/Documentation/i2c/chips/adm9240
new file mode 100644
index 0000000000000000000000000000000000000000..35f618f32896c9228c8a32a3c62b5392043237ac
--- /dev/null
+++ b/Documentation/i2c/chips/adm9240
@@ -0,0 +1,177 @@
+Kernel driver adm9240
+=====================
+
+Supported chips:
+ * Analog Devices ADM9240
+ Prefix: 'adm9240'
+ Addresses scanned: I2C 0x2c - 0x2f
+ Datasheet: Publicly available at the Analog Devices website
+ http://www.analog.com/UploadedFiles/Data_Sheets/79857778ADM9240_0.pdf
+
+ * Dallas Semiconductor DS1780
+ Prefix: 'ds1780'
+ Addresses scanned: I2C 0x2c - 0x2f
+ Datasheet: Publicly available at the Dallas Semiconductor (Maxim) website
+ http://pdfserv.maxim-ic.com/en/ds/DS1780.pdf
+
+ * National Semiconductor LM81
+ Prefix: 'lm81'
+ Addresses scanned: I2C 0x2c - 0x2f
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/ds.cgi/LM/LM81.pdf
+
+Authors:
+ Frodo Looijaard ,
+ Philip Edelbrock ,
+ Michiel Rook ,
+ Grant Coady with guidance
+ from Jean Delvare
+
+Interface
+---------
+The I2C addresses listed above assume BIOS has not changed the
+chip MSB 5-bit address. Each chip reports a unique manufacturer
+identification code as well as the chip revision/stepping level.
+
+Description
+-----------
+[From ADM9240] The ADM9240 is a complete system hardware monitor for
+microprocessor-based systems, providing measurement and limit comparison
+of up to four power supplies and two processor core voltages, plus
+temperature, two fan speeds and chassis intrusion. Measured values can
+be read out via an I2C-compatible serial System Management Bus, and values
+for limit comparisons can be programmed in over the same serial bus. The
+high speed successive approximation ADC allows frequent sampling of all
+analog channels to ensure a fast interrupt response to any out-of-limit
+measurement.
+
+The ADM9240, DS1780 and LM81 are register compatible, the following
+details are common to the three chips. Chip differences are described
+after this section.
+
+
+Measurements
+------------
+The measurement cycle
+
+The adm9240 driver will take a measurement reading no faster than once
+each two seconds. User-space may read sysfs interface faster than the
+measurement update rate and will receive cached data from the most
+recent measurement.
+
+ADM9240 has a very fast 320us temperature and voltage measurement cycle
+with independent fan speed measurement cycles counting alternating rising
+edges of the fan tacho inputs.
+
+DS1780 measurement cycle is about once per second including fan speed.
+
+LM81 measurement cycle is about once per 400ms including fan speed.
+The LM81 12-bit extended temperature measurement mode is not supported.
+
+Temperature
+-----------
+On chip temperature is reported as degrees Celsius as 9-bit signed data
+with resolution of 0.5 degrees Celsius. High and low temperature limits
+are 8-bit signed data with resolution of one degree Celsius.
+
+Temperature alarm is asserted once the temperature exceeds the high limit,
+and is cleared when the temperature falls below the temp1_max_hyst value.
+
+Fan Speed
+---------
+Two fan tacho inputs are provided, the ADM9240 gates an internal 22.5kHz
+clock via a divider to an 8-bit counter. Fan speed (rpm) is calculated by:
+
+rpm = (22500 * 60) / (count * divider)
+
+Automatic fan clock divider
+
+ * User sets 0 to fan_min limit
+ - low speed alarm is disabled
+ - fan clock divider not changed
+ - auto fan clock adjuster enabled for valid fan speed reading
+
+ * User sets fan_min limit too low
+ - low speed alarm is enabled
+ - fan clock divider set to max
+ - fan_min set to register value 254 which corresponds
+ to 664 rpm on adm9240
+ - low speed alarm will be asserted if fan speed is
+ less than minimum measurable speed
+ - auto fan clock adjuster disabled
+
+ * User sets reasonable fan speed
+ - low speed alarm is enabled
+ - fan clock divider set to suit fan_min
+ - auto fan clock adjuster enabled: adjusts fan_min
+
+ * User sets unreasonably high low fan speed limit
+ - resolution of the low speed limit may be reduced
+ - alarm will be asserted
+ - auto fan clock adjuster enabled: adjusts fan_min
+
+ * fan speed may be displayed as zero until the auto fan clock divider
+ adjuster brings fan speed clock divider back into chip measurement
+ range, this will occur within a few measurement cycles.
+
+Analog Output
+-------------
+An analog output provides a 0 to 1.25 volt signal intended for an external
+fan speed amplifier circuit. The analog output is set to maximum value on
+power up or reset. This doesn't do much on the test Intel SE440BX-2.
+
+Voltage Monitor
+
+Voltage (IN) measurement is internally scaled:
+
+ nr label nominal maximum resolution
+ mV mV mV
+ 0 +2.5V 2500 3320 13.0
+ 1 Vccp1 2700 3600 14.1
+ 2 +3.3V 3300 4380 17.2
+ 3 +5V 5000 6640 26.0
+ 4 +12V 12000 15940 62.5
+ 5 Vccp2 2700 3600 14.1
+
+The reading is an unsigned 8-bit value, nominal voltage measurement is
+represented by a reading of 192, being 3/4 of the measurement range.
+
+An alarm is asserted for any voltage going below or above the set limits.
+
+The driver reports and accepts voltage limits scaled to the above table.
+
+VID Monitor
+-----------
+The chip has five inputs to read the 5-bit VID and reports the mV value
+based on detected CPU type.
+
+Chassis Intrusion
+-----------------
+An alarm is asserted when the CI pin goes active high. The ADM9240
+Datasheet has an example of an external temperature sensor driving
+this pin. On an Intel SE440BX-2 the Chassis Intrusion header is
+connected to a normally open switch.
+
+The ADM9240 provides an internal open drain on this line, and may output
+a 20 ms active low pulse to reset an external Chassis Intrusion latch.
+
+Clear the CI latch by writing value 1 to the sysfs chassis_clear file.
+
+Alarm flags reported as 16-bit word
+
+ bit label comment
+ --- ------------- --------------------------
+ 0 +2.5 V_Error high or low limit exceeded
+ 1 VCCP_Error high or low limit exceeded
+ 2 +3.3 V_Error high or low limit exceeded
+ 3 +5 V_Error high or low limit exceeded
+ 4 Temp_Error temperature error
+ 6 FAN1_Error fan low limit exceeded
+ 7 FAN2_Error fan low limit exceeded
+ 8 +12 V_Error high or low limit exceeded
+ 9 VCCP2_Error high or low limit exceeded
+ 12 Chassis_Error CI pin went high
+
+Remaining bits are reserved and thus undefined. It is important to note
+that alarm bits may be cleared on read, user-space may latch alarms and
+provide the end-user with a method to clear alarm memory.
diff --git a/Documentation/i2c/chips/asb100 b/Documentation/i2c/chips/asb100
new file mode 100644
index 0000000000000000000000000000000000000000..ab7365e139be12767f78568e324d5dbe2793c7ab
--- /dev/null
+++ b/Documentation/i2c/chips/asb100
@@ -0,0 +1,72 @@
+Kernel driver asb100
+====================
+
+Supported Chips:
+ * Asus ASB100 and ASB100-A "Bach"
+ Prefix: 'asb100'
+ Addresses scanned: I2C 0x2d
+ Datasheet: none released
+
+Author: Mark M. Hoffman
+
+Description
+-----------
+
+This driver implements support for the Asus ASB100 and ASB100-A "Bach".
+These are custom ASICs available only on Asus mainboards. Asus refuses to
+supply a datasheet for these chips. Thanks go to many people who helped
+investigate their hardware, including:
+
+Vitaly V. Bursov
+Alexander van Kaam (author of MBM for Windows)
+Bertrik Sikken
+
+The ASB100 implements seven voltage sensors, three fan rotation speed
+sensors, four temperature sensors, VID lines and alarms. In addition to
+these, the ASB100-A also implements a single PWM controller for fans 2 and
+3 (i.e. one setting controls both.) If you have a plain ASB100, the PWM
+controller will simply not work (or maybe it will for you... it doesn't for
+me).
+
+Temperatures are measured and reported in degrees Celsius.
+
+Fan speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit.
+
+Voltage sensors (also known as IN sensors) report values in volts.
+
+The VID lines encode the core voltage value: the voltage level your
+processor should work with. This is hardcoded by the mainboard and/or
+processor itself. It is a value in volts.
+
+Alarms: (TODO question marks indicate may or may not work)
+
+0x0001 => in0 (?)
+0x0002 => in1 (?)
+0x0004 => in2
+0x0008 => in3
+0x0010 => temp1 (1)
+0x0020 => temp2
+0x0040 => fan1
+0x0080 => fan2
+0x0100 => in4
+0x0200 => in5 (?) (2)
+0x0400 => in6 (?) (2)
+0x0800 => fan3
+0x1000 => chassis switch
+0x2000 => temp3
+
+Alarm Notes:
+
+(1) This alarm will only trigger if the hysteresis value is 127C.
+I.e. it behaves the same as w83781d.
+
+(2) The min and max registers for these values appear to
+be read-only or otherwise stuck at 0x00.
+
+TODO:
+* Experiment with fan divisors > 8.
+* Experiment with temp. sensor types.
+* Are there really 13 voltage inputs? Probably not...
+* Cleanups, no doubt...
+
diff --git a/Documentation/i2c/chips/ds1621 b/Documentation/i2c/chips/ds1621
new file mode 100644
index 0000000000000000000000000000000000000000..1fee6f1e6bc5574102b04d13d5ed1fd1396f0641
--- /dev/null
+++ b/Documentation/i2c/chips/ds1621
@@ -0,0 +1,108 @@
+Kernel driver ds1621
+====================
+
+Supported chips:
+ * Dallas Semiconductor DS1621
+ Prefix: 'ds1621'
+ Addresses scanned: I2C 0x48 - 0x4f
+ Datasheet: Publicly available at the Dallas Semiconductor website
+ http://www.dalsemi.com/
+ * Dallas Semiconductor DS1625
+ Prefix: 'ds1621'
+ Addresses scanned: I2C 0x48 - 0x4f
+ Datasheet: Publicly available at the Dallas Semiconductor website
+ http://www.dalsemi.com/
+
+Authors:
+ Christian W. Zuckschwerdt
+ valuable contributions by Jan M. Sendler
+ ported to 2.6 by Aurelien Jarno
+ with the help of Jean Delvare
+
+Module Parameters
+------------------
+
+* polarity int
+ Output's polarity: 0 = active high, 1 = active low
+
+Description
+-----------
+
+The DS1621 is a (one instance) digital thermometer and thermostat. It has
+both high and low temperature limits which can be user defined (i.e.
+programmed into non-volatile on-chip registers). Temperature range is -55
+degree Celsius to +125 in 0.5 increments. You may convert this into a
+Fahrenheit range of -67 to +257 degrees with 0.9 steps. If polarity
+parameter is not provided, original value is used.
+
+As for the thermostat, behavior can also be programmed using the polarity
+toggle. On the one hand ("heater"), the thermostat output of the chip,
+Tout, will trigger when the low limit temperature is met or underrun and
+stays high until the high limit is met or exceeded. On the other hand
+("cooler"), vice versa. That way "heater" equals "active low", whereas
+"conditioner" equals "active high". Please note that the DS1621 data sheet
+is somewhat misleading in this point since setting the polarity bit does
+not simply invert Tout.
+
+A second thing is that, during extensive testing, Tout showed a tolerance
+of up to +/- 0.5 degrees even when compared against precise temperature
+readings. Be sure to have a high vs. low temperature limit gap of al least
+1.0 degree Celsius to avoid Tout "bouncing", though!
+
+As for alarms, you can read the alarm status of the DS1621 via the 'alarms'
+/sys file interface. The result consists mainly of bit 6 and 5 of the
+configuration register of the chip; bit 6 (0x40 or 64) is the high alarm
+bit and bit 5 (0x20 or 32) the low one. These bits are set when the high or
+low limits are met or exceeded and are reset by the module as soon as the
+respective temperature ranges are left.
+
+The alarm registers are in no way suitable to find out about the actual
+status of Tout. They will only tell you about its history, whether or not
+any of the limits have ever been met or exceeded since last power-up or
+reset. Be aware: When testing, it showed that the status of Tout can change
+with neither of the alarms set.
+
+Temperature conversion of the DS1621 takes up to 1000ms; internal access to
+non-volatile registers may last for 10ms or below.
+
+High Accuracy Temperature Reading
+---------------------------------
+
+As said before, the temperature issued via the 9-bit i2c-bus data is
+somewhat arbitrary. Internally, the temperature conversion is of a
+different kind that is explained (not so...) well in the DS1621 data sheet.
+To cut the long story short: Inside the DS1621 there are two oscillators,
+both of them biassed by a temperature coefficient.
+
+Higher resolution of the temperature reading can be achieved using the
+internal projection, which means taking account of REG_COUNT and REG_SLOPE
+(the driver manages them):
+
+Taken from Dallas Semiconductors App Note 068: 'Increasing Temperature
+Resolution on the DS1620' and App Note 105: 'High Resolution Temperature
+Measurement with Dallas Direct-to-Digital Temperature Sensors'
+
+- Read the 9-bit temperature and strip the LSB (Truncate the .5 degs)
+- The resulting value is TEMP_READ.
+- Then, read REG_COUNT.
+- And then, REG_SLOPE.
+
+ TEMP = TEMP_READ - 0.25 + ((REG_SLOPE - REG_COUNT) / REG_SLOPE)
+
+Note that this is what the DONE bit in the DS1621 configuration register is
+good for: Internally, one temperature conversion takes up to 1000ms. Before
+that conversion is complete you will not be able to read valid things out
+of REG_COUNT and REG_SLOPE. The DONE bit, as you may have guessed by now,
+tells you whether the conversion is complete ("done", in plain English) and
+thus, whether the values you read are good or not.
+
+The DS1621 has two modes of operation: "Continuous" conversion, which can
+be understood as the default stand-alone mode where the chip gets the
+temperature and controls external devices via its Tout pin or tells other
+i2c's about it if they care. The other mode is called "1SHOT", that means
+that it only figures out about the temperature when it is explicitly told
+to do so; this can be seen as power saving mode.
+
+Now if you want to read REG_COUNT and REG_SLOPE, you have to either stop
+the continuous conversions until the contents of these registers are valid,
+or, in 1SHOT mode, you have to have one conversion made.
diff --git a/Documentation/i2c/chips/eeprom b/Documentation/i2c/chips/eeprom
new file mode 100644
index 0000000000000000000000000000000000000000..f7e8104b5764fa277b09ef4e7c9a9ab8634719b3
--- /dev/null
+++ b/Documentation/i2c/chips/eeprom
@@ -0,0 +1,96 @@
+Kernel driver eeprom
+====================
+
+Supported chips:
+ * Any EEPROM chip in the designated address range
+ Prefix: 'eeprom'
+ Addresses scanned: I2C 0x50 - 0x57
+ Datasheets: Publicly available from:
+ Atmel (www.atmel.com),
+ Catalyst (www.catsemi.com),
+ Fairchild (www.fairchildsemi.com),
+ Microchip (www.microchip.com),
+ Philips (www.semiconductor.philips.com),
+ Rohm (www.rohm.com),
+ ST (www.st.com),
+ Xicor (www.xicor.com),
+ and others.
+
+ Chip Size (bits) Address
+ 24C01 1K 0x50 (shadows at 0x51 - 0x57)
+ 24C01A 1K 0x50 - 0x57 (Typical device on DIMMs)
+ 24C02 2K 0x50 - 0x57
+ 24C04 4K 0x50, 0x52, 0x54, 0x56
+ (additional data at 0x51, 0x53, 0x55, 0x57)
+ 24C08 8K 0x50, 0x54 (additional data at 0x51, 0x52,
+ 0x53, 0x55, 0x56, 0x57)
+ 24C16 16K 0x50 (additional data at 0x51 - 0x57)
+ Sony 2K 0x57
+
+ Atmel 34C02B 2K 0x50 - 0x57, SW write protect at 0x30-37
+ Catalyst 34FC02 2K 0x50 - 0x57, SW write protect at 0x30-37
+ Catalyst 34RC02 2K 0x50 - 0x57, SW write protect at 0x30-37
+ Fairchild 34W02 2K 0x50 - 0x57, SW write protect at 0x30-37
+ Microchip 24AA52 2K 0x50 - 0x57, SW write protect at 0x30-37
+ ST M34C02 2K 0x50 - 0x57, SW write protect at 0x30-37
+
+
+Authors:
+ Frodo Looijaard ,
+ Philip Edelbrock ,
+ Jean Delvare ,
+ Greg Kroah-Hartman ,
+ IBM Corp.
+
+Description
+-----------
+
+This is a simple EEPROM module meant to enable reading the first 256 bytes
+of an EEPROM (on a SDRAM DIMM for example). However, it will access serial
+EEPROMs on any I2C adapter. The supported devices are generically called
+24Cxx, and are listed above; however the numbering for these
+industry-standard devices may vary by manufacturer.
+
+This module was a programming exercise to get used to the new project
+organization laid out by Frodo, but it should be at least completely
+effective for decoding the contents of EEPROMs on DIMMs.
+
+DIMMS will typically contain a 24C01A or 24C02, or the 34C02 variants.
+The other devices will not be found on a DIMM because they respond to more
+than one address.
+
+DDC Monitors may contain any device. Often a 24C01, which responds to all 8
+addresses, is found.
+
+Recent Sony Vaio laptops have an EEPROM at 0x57. We couldn't get the
+specification, so it is guess work and far from being complete.
+
+The Microchip 24AA52/24LCS52, ST M34C02, and others support an additional
+software write protect register at 0x30 - 0x37 (0x20 less than the memory
+location). The chip responds to "write quick" detection at this address but
+does not respond to byte reads. If this register is present, the lower 128
+bytes of the memory array are not write protected. Any byte data write to
+this address will write protect the memory array permanently, and the
+device will no longer respond at the 0x30-37 address. The eeprom driver
+does not support this register.
+
+Lacking functionality:
+
+* Full support for larger devices (24C04, 24C08, 24C16). These are not
+typically found on a PC. These devices will appear as separate devices at
+multiple addresses.
+
+* Support for really large devices (24C32, 24C64, 24C128, 24C256, 24C512).
+These devices require two-byte address fields and are not supported.
+
+* Enable Writing. Again, no technical reason why not, but making it easy
+to change the contents of the EEPROMs (on DIMMs anyway) also makes it easy
+to disable the DIMMs (potentially preventing the computer from booting)
+until the values are restored somehow.
+
+Use:
+
+After inserting the module (and any other required SMBus/i2c modules), you
+should have some EEPROM directories in /sys/bus/i2c/devices/* of names such
+as "0-0050". Inside each of these is a series of files, the eeprom file
+contains the binary data from EEPROM.
diff --git a/Documentation/i2c/chips/fscher b/Documentation/i2c/chips/fscher
new file mode 100644
index 0000000000000000000000000000000000000000..64031659aff3123e463a004ff54fad7e55e90d34
--- /dev/null
+++ b/Documentation/i2c/chips/fscher
@@ -0,0 +1,169 @@
+Kernel driver fscher
+====================
+
+Supported chips:
+ * Fujitsu-Siemens Hermes chip
+ Prefix: 'fscher'
+ Addresses scanned: I2C 0x73
+
+Authors:
+ Reinhard Nissl based on work
+ from Hermann Jung ,
+ Frodo Looijaard ,
+ Philip Edelbrock
+
+Description
+-----------
+
+This driver implements support for the Fujitsu-Siemens Hermes chip. It is
+described in the 'Register Set Specification BMC Hermes based Systemboard'
+from Fujitsu-Siemens.
+
+The Hermes chip implements a hardware-based system management, e.g. for
+controlling fan speed and core voltage. There is also a watchdog counter on
+the chip which can trigger an alarm and even shut the system down.
+
+The chip provides three temperature values (CPU, motherboard and
+auxiliary), three voltage values (+12V, +5V and battery) and three fans
+(power supply, CPU and auxiliary).
+
+Temperatures are measured in degrees Celsius. The resolution is 1 degree.
+
+Fan rotation speeds are reported in RPM (rotations per minute). The value
+can be divided by a programmable divider (1, 2 or 4) which is stored on
+the chip.
+
+Voltage sensors (also known as "in" sensors) report their values in volts.
+
+All values are reported as final values from the driver. There is no need
+for further calculations.
+
+
+Detailed description
+--------------------
+
+Below you'll find a single line description of all the bit values. With
+this information, you're able to decode e. g. alarms, wdog, etc. To make
+use of the watchdog, you'll need to set the watchdog time and enable the
+watchdog. After that it is necessary to restart the watchdog time within
+the specified period of time, or a system reset will occur.
+
+* revision
+ READING & 0xff = 0x??: HERMES revision identification
+
+* alarms
+ READING & 0x80 = 0x80: CPU throttling active
+ READING & 0x80 = 0x00: CPU running at full speed
+
+ READING & 0x10 = 0x10: software event (see control:1)
+ READING & 0x10 = 0x00: no software event
+
+ READING & 0x08 = 0x08: watchdog event (see wdog:2)
+ READING & 0x08 = 0x00: no watchdog event
+
+ READING & 0x02 = 0x02: thermal event (see temp*:1)
+ READING & 0x02 = 0x00: no thermal event
+
+ READING & 0x01 = 0x01: fan event (see fan*:1)
+ READING & 0x01 = 0x00: no fan event
+
+ READING & 0x13 ! 0x00: ALERT LED is flashing
+
+* control
+ READING & 0x01 = 0x01: software event
+ READING & 0x01 = 0x00: no software event
+
+ WRITING & 0x01 = 0x01: set software event
+ WRITING & 0x01 = 0x00: clear software event
+
+* watchdog_control
+ READING & 0x80 = 0x80: power off on watchdog event while thermal event
+ READING & 0x80 = 0x00: watchdog power off disabled (just system reset enabled)
+
+ READING & 0x40 = 0x40: watchdog timebase 60 seconds (see also wdog:1)
+ READING & 0x40 = 0x00: watchdog timebase 2 seconds
+
+ READING & 0x10 = 0x10: watchdog enabled
+ READING & 0x10 = 0x00: watchdog disabled
+
+ WRITING & 0x80 = 0x80: enable "power off on watchdog event while thermal event"
+ WRITING & 0x80 = 0x00: disable "power off on watchdog event while thermal event"
+
+ WRITING & 0x40 = 0x40: set watchdog timebase to 60 seconds
+ WRITING & 0x40 = 0x00: set watchdog timebase to 2 seconds
+
+ WRITING & 0x20 = 0x20: disable watchdog
+
+ WRITING & 0x10 = 0x10: enable watchdog / restart watchdog time
+
+* watchdog_state
+ READING & 0x02 = 0x02: watchdog system reset occurred
+ READING & 0x02 = 0x00: no watchdog system reset occurred
+
+ WRITING & 0x02 = 0x02: clear watchdog event
+
+* watchdog_preset
+ READING & 0xff = 0x??: configured watch dog time in units (see wdog:3 0x40)
+
+ WRITING & 0xff = 0x??: configure watch dog time in units
+
+* in* (0: +5V, 1: +12V, 2: onboard 3V battery)
+ READING: actual voltage value
+
+* temp*_status (1: CPU sensor, 2: onboard sensor, 3: auxiliary sensor)
+ READING & 0x02 = 0x02: thermal event (overtemperature)
+ READING & 0x02 = 0x00: no thermal event
+
+ READING & 0x01 = 0x01: sensor is working
+ READING & 0x01 = 0x00: sensor is faulty
+
+ WRITING & 0x02 = 0x02: clear thermal event
+
+* temp*_input (1: CPU sensor, 2: onboard sensor, 3: auxiliary sensor)
+ READING: actual temperature value
+
+* fan*_status (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
+ READING & 0x04 = 0x04: fan event (fan fault)
+ READING & 0x04 = 0x00: no fan event
+
+ WRITING & 0x04 = 0x04: clear fan event
+
+* fan*_div (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
+ Divisors 2,4 and 8 are supported, both for reading and writing
+
+* fan*_pwm (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
+ READING & 0xff = 0x00: fan may be switched off
+ READING & 0xff = 0x01: fan must run at least at minimum speed (supply: 6V)
+ READING & 0xff = 0xff: fan must run at maximum speed (supply: 12V)
+ READING & 0xff = 0x??: fan must run at least at given speed (supply: 6V..12V)
+
+ WRITING & 0xff = 0x00: fan may be switched off
+ WRITING & 0xff = 0x01: fan must run at least at minimum speed (supply: 6V)
+ WRITING & 0xff = 0xff: fan must run at maximum speed (supply: 12V)
+ WRITING & 0xff = 0x??: fan must run at least at given speed (supply: 6V..12V)
+
+* fan*_input (1: power supply fan, 2: CPU fan, 3: auxiliary fan)
+ READING: actual RPM value
+
+
+Limitations
+-----------
+
+* Measuring fan speed
+It seems that the chip counts "ripples" (typical fans produce 2 ripples per
+rotation while VERAX fans produce 18) in a 9-bit register. This register is
+read out every second, then the ripple prescaler (2, 4 or 8) is applied and
+the result is stored in the 8 bit output register. Due to the limitation of
+the counting register to 9 bits, it is impossible to measure a VERAX fan
+properly (even with a prescaler of 8). At its maximum speed of 3500 RPM the
+fan produces 1080 ripples per second which causes the counting register to
+overflow twice, leading to only 186 RPM.
+
+* Measuring input voltages
+in2 ("battery") reports the voltage of the onboard lithium battery and not
++3.3V from the power supply.
+
+* Undocumented features
+Fujitsu-Siemens Computers has not documented all features of the chip so
+far. Their software, System Guard, shows that there are a still some
+features which cannot be controlled by this implementation.
diff --git a/Documentation/i2c/chips/gl518sm b/Documentation/i2c/chips/gl518sm
new file mode 100644
index 0000000000000000000000000000000000000000..ce0881883bca8ce02479342cdd037dc3daf6dfef
--- /dev/null
+++ b/Documentation/i2c/chips/gl518sm
@@ -0,0 +1,74 @@
+Kernel driver gl518sm
+=====================
+
+Supported chips:
+ * Genesys Logic GL518SM release 0x00
+ Prefix: 'gl518sm'
+ Addresses scanned: I2C 0x2c and 0x2d
+ Datasheet: http://www.genesyslogic.com/pdf
+ * Genesys Logic GL518SM release 0x80
+ Prefix: 'gl518sm'
+ Addresses scanned: I2C 0x2c and 0x2d
+ Datasheet: http://www.genesyslogic.com/pdf
+
+Authors:
+ Frodo Looijaard ,
+ Kyösti Mälkki
+ Hong-Gunn Chew
+ Jean Delvare
+
+Description
+-----------
+
+IMPORTANT:
+
+For the revision 0x00 chip, the in0, in1, and in2 values (+5V, +3V,
+and +12V) CANNOT be read. This is a limitation of the chip, not the driver.
+
+This driver supports the Genesys Logic GL518SM chip. There are at least
+two revision of this chip, which we call revision 0x00 and 0x80. Revision
+0x80 chips support the reading of all voltages and revision 0x00 only
+for VIN3.
+
+The GL518SM implements one temperature sensor, two fan rotation speed
+sensors, and four voltage sensors. It can report alarms through the
+computer speakers.
+
+Temperatures are measured in degrees Celsius. An alarm goes off while the
+temperature is above the over temperature limit, and has not yet dropped
+below the hysteresis limit. The alarm always reflects the current
+situation. Measurements are guaranteed between -10 degrees and +110
+degrees, with a accuracy of +/-3 degrees.
+
+Rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. In
+case when you have selected to turn fan1 off, no fan1 alarm is triggered.
+
+Fan readings can be divided by a programmable divider (1, 2, 4 or 8) to
+give the readings more range or accuracy. Not all RPM values can
+accurately be represented, so some rounding is done. With a divider
+of 2, the lowest representable value is around 1900 RPM.
+
+Voltage sensors (also known as VIN sensors) report their values in volts.
+An alarm is triggered if the voltage has crossed a programmable minimum or
+maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. The VDD input
+measures voltages between 0.000 and 5.865 volt, with a resolution of 0.023
+volt. The other inputs measure voltages between 0.000 and 4.845 volt, with
+a resolution of 0.019 volt. Note that revision 0x00 chips do not support
+reading the current voltage of any input except for VIN3; limit setting and
+alarms work fine, though.
+
+When an alarm is triggered, you can be warned by a beeping signal through your
+computer speaker. It is possible to enable all beeping globally, or only the
+beeping for some alarms.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once (except for temperature alarms). This means that the
+cause for the alarm may already have disappeared! Note that in the current
+implementation, all hardware registers are read whenever any data is read
+(unless it is less than 1.5 seconds since the last update). This means that
+you can easily miss once-only alarms.
+
+The GL518SM only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
diff --git a/Documentation/i2c/chips/it87 b/Documentation/i2c/chips/it87
new file mode 100644
index 0000000000000000000000000000000000000000..0d0195040d88cfcb283febdc9a0edbe2cf6f0e21
--- /dev/null
+++ b/Documentation/i2c/chips/it87
@@ -0,0 +1,96 @@
+Kernel driver it87
+==================
+
+Supported chips:
+ * IT8705F
+ Prefix: 'it87'
+ Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+ Datasheet: Publicly available at the ITE website
+ http://www.ite.com.tw/
+ * IT8712F
+ Prefix: 'it8712'
+ Addresses scanned: I2C 0x28 - 0x2f
+ from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+ Datasheet: Publicly available at the ITE website
+ http://www.ite.com.tw/
+ * SiS950 [clone of IT8705F]
+ Prefix: 'sis950'
+ Addresses scanned: from Super I/O config space, or default ISA 0x290 (8 I/O ports)
+ Datasheet: No longer be available
+
+Author: Christophe Gauthron
+
+
+Module Parameters
+-----------------
+
+* update_vbat: int
+
+ 0 if vbat should report power on value, 1 if vbat should be updated after
+ each read. Default is 0. On some boards the battery voltage is provided
+ by either the battery or the onboard power supply. Only the first reading
+ at power on will be the actual battery voltage (which the chip does
+ automatically). On other boards the battery voltage is always fed to
+ the chip so can be read at any time. Excessive reading may decrease
+ battery life but no information is given in the datasheet.
+
+* fix_pwm_polarity int
+
+ Force PWM polarity to active high (DANGEROUS). Some chips are
+ misconfigured by BIOS - PWM values would be inverted. This option tries
+ to fix this. Please contact your BIOS manufacturer and ask him for fix.
+
+Description
+-----------
+
+This driver implements support for the IT8705F, IT8712F and SiS950 chips.
+
+This driver also supports IT8712F, which adds SMBus access, and a VID
+input, used to report the Vcore voltage of the Pentium processor.
+The IT8712F additionally features VID inputs.
+
+These chips are 'Super I/O chips', supporting floppy disks, infrared ports,
+joysticks and other miscellaneous stuff. For hardware monitoring, they
+include an 'environment controller' with 3 temperature sensors, 3 fan
+rotation speed sensors, 8 voltage sensors, and associated alarms.
+
+Temperatures are measured in degrees Celsius. An alarm is triggered once
+when the Overtemperature Shutdown limit is crossed.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give the
+readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+Voltage sensors (also known as IN sensors) report their values in volts. An
+alarm is triggered if the voltage has crossed a programmable minimum or
+maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. All voltage
+inputs can measure voltages between 0 and 4.08 volts, with a resolution of
+0.016 volt. The battery voltage in8 does not have limit registers.
+
+The VID lines (IT8712F only) encode the core voltage value: the voltage
+level your processor should work with. This is hardcoded by the mainboard
+and/or processor itself. It is a value in volts.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may already
+have disappeared! Note that in the current implementation, all hardware
+registers are read whenever any data is read (unless it is less than 1.5
+seconds since the last update). This means that you can easily miss
+once-only alarms.
+
+The IT87xx only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
+
+To change sensor N to a thermistor, 'echo 2 > tempN_type' where N is 1, 2,
+or 3. To change sensor N to a thermal diode, 'echo 3 > tempN_type'.
+Give 0 for unused sensor. Any other value is invalid. To configure this at
+startup, consult lm_sensors's /etc/sensors.conf. (2 = thermistor;
+3 = thermal diode)
+
+The fan speed control features are limited to manual PWM mode. Automatic
+"Smart Guardian" mode control handling is not implemented. However
+if you want to go for "manual mode" just write 1 to pwmN_enable.
diff --git a/Documentation/i2c/chips/lm63 b/Documentation/i2c/chips/lm63
new file mode 100644
index 0000000000000000000000000000000000000000..31660bf979795a68dc6b9918e4fd1ae32cf80892
--- /dev/null
+++ b/Documentation/i2c/chips/lm63
@@ -0,0 +1,57 @@
+Kernel driver lm63
+==================
+
+Supported chips:
+ * National Semiconductor LM63
+ Prefix: 'lm63'
+ Addresses scanned: I2C 0x4c
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/pf/LM/LM63.html
+
+Author: Jean Delvare
+
+Thanks go to Tyan and especially Alex Buckingham for setting up a remote
+access to their S4882 test platform for this driver.
+ http://www.tyan.com/
+
+Description
+-----------
+
+The LM63 is a digital temperature sensor with integrated fan monitoring
+and control.
+
+The LM63 is basically an LM86 with fan speed monitoring and control
+capabilities added. It misses some of the LM86 features though:
+ - No low limit for local temperature.
+ - No critical limit for local temperature.
+ - Critical limit for remote temperature can be changed only once. We
+ will consider that the critical limit is read-only.
+
+The datasheet isn't very clear about what the tachometer reading is.
+
+An explanation from National Semiconductor: The two lower bits of the read
+value have to be masked out. The value is still 16 bit in width.
+
+All temperature values are given in degrees Celsius. Resolution is 1.0
+degree for the local temperature, 0.125 degree for the remote temperature.
+
+The fan speed is measured using a tachometer. Contrary to most chips which
+store the value in an 8-bit register and have a selectable clock divider
+to make sure that the result will fit in the register, the LM63 uses 16-bit
+value for measuring the speed of the fan. It can measure fan speeds down to
+83 RPM, at least in theory.
+
+Note that the pin used for fan monitoring is shared with an alert out
+function. Depending on how the board designer wanted to use the chip, fan
+speed monitoring will or will not be possible. The proper chip configuration
+is left to the BIOS, and the driver will blindly trust it.
+
+A PWM output can be used to control the speed of the fan. The LM63 has two
+PWM modes: manual and automatic. Automatic mode is not fully implemented yet
+(you cannot define your custom PWM/temperature curve), and mode change isn't
+supported either.
+
+The lm63 driver will not update its values more frequently than every
+second; reading them more often will do no harm, but will return 'old'
+values.
+
diff --git a/Documentation/i2c/chips/lm75 b/Documentation/i2c/chips/lm75
new file mode 100644
index 0000000000000000000000000000000000000000..8e6356fe05d78bbea5cdaf41e2def9b2f5aaf5a4
--- /dev/null
+++ b/Documentation/i2c/chips/lm75
@@ -0,0 +1,65 @@
+Kernel driver lm75
+==================
+
+Supported chips:
+ * National Semiconductor LM75
+ Prefix: 'lm75'
+ Addresses scanned: I2C 0x48 - 0x4f
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/
+ * Dallas Semiconductor DS75
+ Prefix: 'lm75'
+ Addresses scanned: I2C 0x48 - 0x4f
+ Datasheet: Publicly available at the Dallas Semiconductor website
+ http://www.maxim-ic.com/
+ * Dallas Semiconductor DS1775
+ Prefix: 'lm75'
+ Addresses scanned: I2C 0x48 - 0x4f
+ Datasheet: Publicly available at the Dallas Semiconductor website
+ http://www.maxim-ic.com/
+ * Maxim MAX6625, MAX6626
+ Prefix: 'lm75'
+ Addresses scanned: I2C 0x48 - 0x4b
+ Datasheet: Publicly available at the Maxim website
+ http://www.maxim-ic.com/
+ * Microchip (TelCom) TCN75
+ Prefix: 'lm75'
+ Addresses scanned: I2C 0x48 - 0x4f
+ Datasheet: Publicly available at the Microchip website
+ http://www.microchip.com/
+
+Author: Frodo Looijaard
+
+Description
+-----------
+
+The LM75 implements one temperature sensor. Limits can be set through the
+Overtemperature Shutdown register and Hysteresis register. Each value can be
+set and read to half-degree accuracy.
+An alarm is issued (usually to a connected LM78) when the temperature
+gets higher then the Overtemperature Shutdown value; it stays on until
+the temperature falls below the Hysteresis value.
+All temperatures are in degrees Celsius, and are guaranteed within a
+range of -55 to +125 degrees.
+
+The LM75 only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
+
+The LM75 is usually used in combination with LM78-like chips, to measure
+the temperature of the processor(s).
+
+The DS75, DS1775, MAX6625, and MAX6626 are supported as well.
+They are not distinguished from an LM75. While most of these chips
+have three additional bits of accuracy (12 vs. 9 for the LM75),
+the additional bits are not supported. Not only that, but these chips will
+not be detected if not in 9-bit precision mode (use the force parameter if
+needed).
+
+The TCN75 is supported as well, and is not distinguished from an LM75.
+
+The LM75 is essentially an industry standard; there may be other
+LM75 clones not listed here, with or without various enhancements,
+that are supported.
+
+The LM77 is not supported, contrary to what we pretended for a long time.
+Both chips are simply not compatible, value encoding differs.
diff --git a/Documentation/i2c/chips/lm77 b/Documentation/i2c/chips/lm77
new file mode 100644
index 0000000000000000000000000000000000000000..57c3a46d637096c485e31556dba357c2415d1866
--- /dev/null
+++ b/Documentation/i2c/chips/lm77
@@ -0,0 +1,22 @@
+Kernel driver lm77
+==================
+
+Supported chips:
+ * National Semiconductor LM77
+ Prefix: 'lm77'
+ Addresses scanned: I2C 0x48 - 0x4b
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/
+
+Author: Andras BALI
+
+Description
+-----------
+
+The LM77 implements one temperature sensor. The temperature
+sensor incorporates a band-gap type temperature sensor,
+10-bit ADC, and a digital comparator with user-programmable upper
+and lower limit values.
+
+Limits can be set through the Overtemperature Shutdown register and
+Hysteresis register.
diff --git a/Documentation/i2c/chips/lm78 b/Documentation/i2c/chips/lm78
new file mode 100644
index 0000000000000000000000000000000000000000..357086ed7f64e5307506c225f6c3e46db155f932
--- /dev/null
+++ b/Documentation/i2c/chips/lm78
@@ -0,0 +1,82 @@
+Kernel driver lm78
+==================
+
+Supported chips:
+ * National Semiconductor LM78
+ Prefix: 'lm78'
+ Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/
+ * National Semiconductor LM78-J
+ Prefix: 'lm78-j'
+ Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/
+ * National Semiconductor LM79
+ Prefix: 'lm79'
+ Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/
+
+Author: Frodo Looijaard
+
+Description
+-----------
+
+This driver implements support for the National Semiconductor LM78, LM78-J
+and LM79. They are described as 'Microprocessor System Hardware Monitors'.
+
+There is almost no difference between the three supported chips. Functionally,
+the LM78 and LM78-J are exactly identical. The LM79 has one more VID line,
+which is used to report the lower voltages newer Pentium processors use.
+From here on, LM7* means either of these three types.
+
+The LM7* implements one temperature sensor, three fan rotation speed sensors,
+seven voltage sensors, VID lines, alarms, and some miscellaneous stuff.
+
+Temperatures are measured in degrees Celsius. An alarm is triggered once
+when the Overtemperature Shutdown limit is crossed; it is triggered again
+as soon as it drops below the Hysteresis value. A more useful behavior
+can be found by setting the Hysteresis value to +127 degrees Celsius; in
+this case, alarms are issued during all the time when the actual temperature
+is above the Overtemperature Shutdown value. Measurements are guaranteed
+between -55 and +125 degrees, with a resolution of 1 degree.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+Voltage sensors (also known as IN sensors) report their values in volts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. All voltage
+inputs can measure voltages between 0 and 4.08 volts, with a resolution
+of 0.016 volt.
+
+The VID lines encode the core voltage value: the voltage level your processor
+should work with. This is hardcoded by the mainboard and/or processor itself.
+It is a value in volts. When it is unconnected, you will often find the
+value 3.50 V here.
+
+In addition to the alarms described above, there are a couple of additional
+ones. There is a BTI alarm, which gets triggered when an external chip has
+crossed its limits. Usually, this is connected to all LM75 chips; if at
+least one crosses its limits, this bit gets set. The CHAS alarm triggers
+if your computer case is open. The FIFO alarms should never trigger; it
+indicates an internal error. The SMI_IN alarm indicates some other chip
+has triggered an SMI interrupt. As we do not use SMI interrupts at all,
+this condition usually indicates there is a problem with some other
+device.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared! Note that in the current implementation, all
+hardware registers are read whenever any data is read (unless it is less
+than 1.5 seconds since the last update). This means that you can easily
+miss once-only alarms.
+
+The LM7* only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
diff --git a/Documentation/i2c/chips/lm80 b/Documentation/i2c/chips/lm80
new file mode 100644
index 0000000000000000000000000000000000000000..cb5b407ba3e6b04c4a4dc5c32c5ebbfa66d1ae23
--- /dev/null
+++ b/Documentation/i2c/chips/lm80
@@ -0,0 +1,56 @@
+Kernel driver lm80
+==================
+
+Supported chips:
+ * National Semiconductor LM80
+ Prefix: 'lm80'
+ Addresses scanned: I2C 0x28 - 0x2f
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/
+
+Authors:
+ Frodo Looijaard ,
+ Philip Edelbrock
+
+Description
+-----------
+
+This driver implements support for the National Semiconductor LM80.
+It is described as a 'Serial Interface ACPI-Compatible Microprocessor
+System Hardware Monitor'.
+
+The LM80 implements one temperature sensor, two fan rotation speed sensors,
+seven voltage sensors, alarms, and some miscellaneous stuff.
+
+Temperatures are measured in degrees Celsius. There are two sets of limits
+which operate independently. When the HOT Temperature Limit is crossed,
+this will cause an alarm that will be reasserted until the temperature
+drops below the HOT Hysteresis. The Overtemperature Shutdown (OS) limits
+should work in the same way (but this must be checked; the datasheet
+is unclear about this). Measurements are guaranteed between -55 and
++125 degrees. The current temperature measurement has a resolution of
+0.0625 degrees; the limits have a resolution of 1 degree.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+Voltage sensors (also known as IN sensors) report their values in volts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. All voltage
+inputs can measure voltages between 0 and 2.55 volts, with a resolution
+of 0.01 volt.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared! Note that in the current implementation, all
+hardware registers are read whenever any data is read (unless it is less
+than 2.0 seconds since the last update). This means that you can easily
+miss once-only alarms.
+
+The LM80 only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
diff --git a/Documentation/i2c/chips/lm83 b/Documentation/i2c/chips/lm83
new file mode 100644
index 0000000000000000000000000000000000000000..061d9ed8ff43d4eda0dd093b630e2699f5213f21
--- /dev/null
+++ b/Documentation/i2c/chips/lm83
@@ -0,0 +1,76 @@
+Kernel driver lm83
+==================
+
+Supported chips:
+ * National Semiconductor LM83
+ Prefix: 'lm83'
+ Addresses scanned: I2C 0x18 - 0x1a, 0x29 - 0x2b, 0x4c - 0x4e
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/pf/LM/LM83.html
+
+
+Author: Jean Delvare
+
+Description
+-----------
+
+The LM83 is a digital temperature sensor. It senses its own temperature as
+well as the temperature of up to three external diodes. It is compatible
+with many other devices such as the LM84 and all other ADM1021 clones.
+The main difference between the LM83 and the LM84 in that the later can
+only sense the temperature of one external diode.
+
+Using the adm1021 driver for a LM83 should work, but only two temperatures
+will be reported instead of four.
+
+The LM83 is only found on a handful of motherboards. Both a confirmed
+list and an unconfirmed list follow. If you can confirm or infirm the
+fact that any of these motherboards do actually have an LM83, please
+contact us. Note that the LM90 can easily be misdetected as a LM83.
+
+Confirmed motherboards:
+ SBS P014
+
+Unconfirmed motherboards:
+ Gigabyte GA-8IK1100
+ Iwill MPX2
+ Soltek SL-75DRV5
+
+The driver has been successfully tested by Magnus Forsström, who I'd
+like to thank here. More testers will be of course welcome.
+
+The fact that the LM83 is only scarcely used can be easily explained.
+Most motherboards come with more than just temperature sensors for
+health monitoring. They also have voltage and fan rotation speed
+sensors. This means that temperature-only chips are usually used as
+secondary chips coupled with another chip such as an IT8705F or similar
+chip, which provides more features. Since systems usually need three
+temperature sensors (motherboard, processor, power supply) and primary
+chips provide some temperature sensors, the secondary chip, if needed,
+won't have to handle more than two temperatures. Thus, ADM1021 clones
+are sufficient, and there is no need for a four temperatures sensor
+chip such as the LM83. The only case where using an LM83 would make
+sense is on SMP systems, such as the above-mentioned Iwill MPX2,
+because you want an additional temperature sensor for each additional
+CPU.
+
+On the SBS P014, this is different, since the LM83 is the only hardware
+monitoring chipset. One temperature sensor is used for the motherboard
+(actually measuring the LM83's own temperature), one is used for the
+CPU. The two other sensors must be used to measure the temperature of
+two other points of the motherboard. We suspect these points to be the
+north and south bridges, but this couldn't be confirmed.
+
+All temperature values are given in degrees Celsius. Local temperature
+is given within a range of 0 to +85 degrees. Remote temperatures are
+given within a range of 0 to +125 degrees. Resolution is 1.0 degree,
+accuracy is guaranteed to 3.0 degrees (see the datasheet for more
+details).
+
+Each sensor has its own high limit, but the critical limit is common to
+all four sensors. There is no hysteresis mechanism as found on most
+recent temperature sensors.
+
+The lm83 driver will not update its values more frequently than every
+other second; reading them more often will do no harm, but will return
+'old' values.
diff --git a/Documentation/i2c/chips/lm85 b/Documentation/i2c/chips/lm85
new file mode 100644
index 0000000000000000000000000000000000000000..9549237530cf8a08dbe1460f3f048802cea62567
--- /dev/null
+++ b/Documentation/i2c/chips/lm85
@@ -0,0 +1,221 @@
+Kernel driver lm85
+==================
+
+Supported chips:
+ * National Semiconductor LM85 (B and C versions)
+ Prefix: 'lm85'
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+ Datasheet: http://www.national.com/pf/LM/LM85.html
+ * Analog Devices ADM1027
+ Prefix: 'adm1027'
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+ Datasheet: http://www.analog.com/en/prod/0,,766_825_ADM1027,00.html
+ * Analog Devices ADT7463
+ Prefix: 'adt7463'
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+ Datasheet: http://www.analog.com/en/prod/0,,766_825_ADT7463,00.html
+ * SMSC EMC6D100, SMSC EMC6D101
+ Prefix: 'emc6d100'
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+ Datasheet: http://www.smsc.com/main/tools/discontinued/6d100.pdf
+ * SMSC EMC6D102
+ Prefix: 'emc6d102'
+ Addresses scanned: I2C 0x2c, 0x2d, 0x2e
+ Datasheet: http://www.smsc.com/main/catalog/emc6d102.html
+
+Authors:
+ Philip Pokorny ,
+ Frodo Looijaard ,
+ Richard Barrington ,
+ Margit Schubert-While ,
+ Justin Thiessen
+
+Description
+-----------
+
+This driver implements support for the National Semiconductor LM85 and
+compatible chips including the Analog Devices ADM1027, ADT7463 and
+SMSC EMC6D10x chips family.
+
+The LM85 uses the 2-wire interface compatible with the SMBUS 2.0
+specification. Using an analog to digital converter it measures three (3)
+temperatures and five (5) voltages. It has four (4) 16-bit counters for
+measuring fan speed. Five (5) digital inputs are provided for sampling the
+VID signals from the processor to the VRM. Lastly, there are three (3) PWM
+outputs that can be used to control fan speed.
+
+The voltage inputs have internal scaling resistors so that the following
+voltage can be measured without external resistors:
+
+ 2.5V, 3.3V, 5V, 12V, and CPU core voltage (2.25V)
+
+The temperatures measured are one internal diode, and two remote diodes.
+Remote 1 is generally the CPU temperature. These inputs are designed to
+measure a thermal diode like the one in a Pentium 4 processor in a socket
+423 or socket 478 package. They can also measure temperature using a
+transistor like the 2N3904.
+
+A sophisticated control system for the PWM outputs is designed into the
+LM85 that allows fan speed to be adjusted automatically based on any of the
+three temperature sensors. Each PWM output is individually adjustable and
+programmable. Once configured, the LM85 will adjust the PWM outputs in
+response to the measured temperatures without further host intervention.
+This feature can also be disabled for manual control of the PWM's.
+
+Each of the measured inputs (voltage, temperature, fan speed) has
+corresponding high/low limit values. The LM85 will signal an ALARM if any
+measured value exceeds either limit.
+
+The LM85 samples all inputs continuously. The lm85 driver will not read
+the registers more often than once a second. Further, configuration data is
+only read once each 5 minutes. There is twice as much config data as
+measurements, so this would seem to be a worthwhile optimization.
+
+Special Features
+----------------
+
+The LM85 has four fan speed monitoring modes. The ADM1027 has only two.
+Both have special circuitry to compensate for PWM interactions with the
+TACH signal from the fans. The ADM1027 can be configured to measure the
+speed of a two wire fan, but the input conditioning circuitry is different
+for 3-wire and 2-wire mode. For this reason, the 2-wire fan modes are not
+exposed to user control. The BIOS should initialize them to the correct
+mode. If you've designed your own ADM1027, you'll have to modify the
+init_client function and add an insmod parameter to set this up.
+
+To smooth the response of fans to changes in temperature, the LM85 has an
+optional filter for smoothing temperatures. The ADM1027 has the same
+config option but uses it to rate limit the changes to fan speed instead.
+
+The ADM1027 and ADT7463 have a 10-bit ADC and can therefore measure
+temperatures with 0.25 degC resolution. They also provide an offset to the
+temperature readings that is automatically applied during measurement.
+This offset can be used to zero out any errors due to traces and placement.
+The documentation says that the offset is in 0.25 degC steps, but in
+initial testing of the ADM1027 it was 1.00 degC steps. Analog Devices has
+confirmed this "bug". The ADT7463 is reported to work as described in the
+documentation. The current lm85 driver does not show the offset register.
+
+The ADT7463 has a THERM asserted counter. This counter has a 22.76ms
+resolution and a range of 5.8 seconds. The driver implements a 32-bit
+accumulator of the counter value to extend the range to over a year. The
+counter will stay at it's max value until read.
+
+See the vendor datasheets for more information. There is application note
+from National (AN-1260) with some additional information about the LM85.
+The Analog Devices datasheet is very detailed and describes a procedure for
+determining an optimal configuration for the automatic PWM control.
+
+The SMSC EMC6D100 & EMC6D101 monitor external voltages, temperatures, and
+fan speeds. They use this monitoring capability to alert the system to out
+of limit conditions and can automatically control the speeds of multiple
+fans in a PC or embedded system. The EMC6D101, available in a 24-pin SSOP
+package, and the EMC6D100, available in a 28-pin SSOP package, are designed
+to be register compatible. The EMC6D100 offers all the features of the
+EMC6D101 plus additional voltage monitoring and system control features.
+Unfortunately it is not possible to distinguish between the package
+versions on register level so these additional voltage inputs may read
+zero. The EMC6D102 features addtional ADC bits thus extending precision
+of voltage and temperature channels.
+
+
+Hardware Configurations
+-----------------------
+
+The LM85 can be jumpered for 3 different SMBus addresses. There are
+no other hardware configuration options for the LM85.
+
+The lm85 driver detects both LM85B and LM85C revisions of the chip. See the
+datasheet for a complete description of the differences. Other than
+identifying the chip, the driver behaves no differently with regard to
+these two chips. The LM85B is recommended for new designs.
+
+The ADM1027 and ADT7463 chips have an optional SMBALERT output that can be
+used to signal the chipset in case a limit is exceeded or the temperature
+sensors fail. Individual sensor interrupts can be masked so they won't
+trigger SMBALERT. The SMBALERT output if configured replaces one of the other
+functions (PWM2 or IN0). This functionality is not implemented in current
+driver.
+
+The ADT7463 also has an optional THERM output/input which can be connected
+to the processor PROC_HOT output. If available, the autofan control
+dynamic Tmin feature can be enabled to keep the system temperature within
+spec (just?!) with the least possible fan noise.
+
+Configuration Notes
+-------------------
+
+Besides standard interfaces driver adds following:
+
+* Temperatures and Zones
+
+Each temperature sensor is associated with a Zone. There are three
+sensors and therefore three zones (# 1, 2 and 3). Each zone has the following
+temperature configuration points:
+
+* temp#_auto_temp_off - temperature below which fans should be off or spinning very low.
+* temp#_auto_temp_min - temperature over which fans start to spin.
+* temp#_auto_temp_max - temperature when fans spin at full speed.
+* temp#_auto_temp_crit - temperature when all fans will run full speed.
+
+* PWM Control
+
+There are three PWM outputs. The LM85 datasheet suggests that the
+pwm3 output control both fan3 and fan4. Each PWM can be individually
+configured and assigned to a zone for it's control value. Each PWM can be
+configured individually according to the following options.
+
+* pwm#_auto_pwm_min - this specifies the PWM value for temp#_auto_temp_off
+ temperature. (PWM value from 0 to 255)
+
+* pwm#_auto_pwm_freq - select base frequency of PWM output. You can select
+ in range of 10.0 to 94.0 Hz in .1 Hz units.
+ (Values 100 to 940).
+
+The pwm#_auto_pwm_freq can be set to one of the following 8 values. Setting the
+frequency to a value not on this list, will result in the next higher frequency
+being selected. The actual device frequency may vary slightly from this
+specification as designed by the manufacturer. Consult the datasheet for more
+details. (PWM Frequency values: 100, 150, 230, 300, 380, 470, 620, 940)
+
+* pwm#_auto_pwm_minctl - this flags selects for temp#_auto_temp_off temperature
+ the bahaviour of fans. Write 1 to let fans spinning at
+ pwm#_auto_pwm_min or write 0 to let them off.
+
+NOTE: It has been reported that there is a bug in the LM85 that causes the flag
+to be associated with the zones not the PWMs. This contradicts all the
+published documentation. Setting pwm#_min_ctl in this case actually affects all
+PWMs controlled by zone '#'.
+
+* PWM Controlling Zone selection
+
+* pwm#_auto_channels - controls zone that is associated with PWM
+
+Configuration choices:
+
+ Value Meaning
+ ------ ------------------------------------------------
+ 1 Controlled by Zone 1
+ 2 Controlled by Zone 2
+ 3 Controlled by Zone 3
+ 23 Controlled by higher temp of Zone 2 or 3
+ 123 Controlled by highest temp of Zone 1, 2 or 3
+ 0 PWM always 0% (off)
+ -1 PWM always 100% (full on)
+ -2 Manual control (write to 'pwm#' to set)
+
+The National LM85's have two vendor specific configuration
+features. Tach. mode and Spinup Control. For more details on these,
+see the LM85 datasheet or Application Note AN-1260.
+
+The Analog Devices ADM1027 has several vendor specific enhancements.
+The number of pulses-per-rev of the fans can be set, Tach monitoring
+can be optimized for PWM operation, and an offset can be applied to
+the temperatures to compensate for systemic errors in the
+measurements.
+
+In addition to the ADM1027 features, the ADT7463 also has Tmin control
+and THERM asserted counts. Automatic Tmin control acts to adjust the
+Tmin value to maintain the measured temperature sensor at a specified
+temperature. There isn't much documentation on this feature in the
+ADT7463 data sheet. This is not supported by current driver.
diff --git a/Documentation/i2c/chips/lm87 b/Documentation/i2c/chips/lm87
new file mode 100644
index 0000000000000000000000000000000000000000..c952c57f0e11cb86230e7c9dcbd6c8b7e09dfd16
--- /dev/null
+++ b/Documentation/i2c/chips/lm87
@@ -0,0 +1,73 @@
+Kernel driver lm87
+==================
+
+Supported chips:
+ * National Semiconductor LM87
+ Prefix: 'lm87'
+ Addresses scanned: I2C 0x2c - 0x2f
+ Datasheet: http://www.national.com/pf/LM/LM87.html
+
+Authors:
+ Frodo Looijaard ,
+ Philip Edelbrock ,
+ Mark Studebaker ,
+ Stephen Rousset ,
+ Dan Eaton ,
+ Jean Delvare ,
+ Original 2.6 port Jeff Oliver
+
+Description
+-----------
+
+This driver implements support for the National Semiconductor LM87.
+
+The LM87 implements up to three temperature sensors, up to two fan
+rotation speed sensors, up to seven voltage sensors, alarms, and some
+miscellaneous stuff.
+
+Temperatures are measured in degrees Celsius. Each input has a high
+and low alarm settings. A high limit produces an alarm when the value
+goes above it, and an alarm is also produced when the value goes below
+the low limit.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+Voltage sensors (also known as IN sensors) report their values in
+volts. An alarm is triggered if the voltage has crossed a programmable
+minimum or maximum limit. Note that minimum in this case always means
+'closest to zero'; this is important for negative voltage measurements.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared! Note that in the current implementation, all
+hardware registers are read whenever any data is read (unless it is less
+than 1.0 seconds since the last update). This means that you can easily
+miss once-only alarms.
+
+The lm87 driver only updates its values each 1.0 seconds; reading it more
+often will do no harm, but will return 'old' values.
+
+
+Hardware Configurations
+-----------------------
+
+The LM87 has four pins which can serve one of two possible functions,
+depending on the hardware configuration.
+
+Some functions share pins, so not all functions are available at the same
+time. Which are depends on the hardware setup. This driver assumes that
+the BIOS configured the chip correctly. In that respect, it differs from
+the original driver (from lm_sensors for Linux 2.4), which would force the
+LM87 to an arbitrary, compile-time chosen mode, regardless of the actual
+chipset wiring.
+
+For reference, here is the list of exclusive functions:
+ - in0+in5 (default) or temp3
+ - fan1 (default) or in6
+ - fan2 (default) or in7
+ - VID lines (default) or IRQ lines (not handled by this driver)
diff --git a/Documentation/i2c/chips/lm90 b/Documentation/i2c/chips/lm90
new file mode 100644
index 0000000000000000000000000000000000000000..2c4cf39471f4d8c7a16a0decfe073d88a6615e63
--- /dev/null
+++ b/Documentation/i2c/chips/lm90
@@ -0,0 +1,121 @@
+Kernel driver lm90
+==================
+
+Supported chips:
+ * National Semiconductor LM90
+ Prefix: 'lm90'
+ Addresses scanned: I2C 0x4c
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/pf/LM/LM90.html
+ * National Semiconductor LM89
+ Prefix: 'lm99'
+ Addresses scanned: I2C 0x4c and 0x4d
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/pf/LM/LM89.html
+ * National Semiconductor LM99
+ Prefix: 'lm99'
+ Addresses scanned: I2C 0x4c and 0x4d
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/pf/LM/LM99.html
+ * National Semiconductor LM86
+ Prefix: 'lm86'
+ Addresses scanned: I2C 0x4c
+ Datasheet: Publicly available at the National Semiconductor website
+ http://www.national.com/pf/LM/LM86.html
+ * Analog Devices ADM1032
+ Prefix: 'adm1032'
+ Addresses scanned: I2C 0x4c
+ Datasheet: Publicly available at the Analog Devices website
+ http://products.analog.com/products/info.asp?product=ADM1032
+ * Analog Devices ADT7461
+ Prefix: 'adt7461'
+ Addresses scanned: I2C 0x4c
+ Datasheet: Publicly available at the Analog Devices website
+ http://products.analog.com/products/info.asp?product=ADT7461
+ Note: Only if in ADM1032 compatibility mode
+ * Maxim MAX6657
+ Prefix: 'max6657'
+ Addresses scanned: I2C 0x4c
+ Datasheet: Publicly available at the Maxim website
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
+ * Maxim MAX6658
+ Prefix: 'max6657'
+ Addresses scanned: I2C 0x4c
+ Datasheet: Publicly available at the Maxim website
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
+ * Maxim MAX6659
+ Prefix: 'max6657'
+ Addresses scanned: I2C 0x4c, 0x4d (unsupported 0x4e)
+ Datasheet: Publicly available at the Maxim website
+ http://www.maxim-ic.com/quick_view2.cfm/qv_pk/2578
+
+
+Author: Jean Delvare
+
+
+Description
+-----------
+
+The LM90 is a digital temperature sensor. It senses its own temperature as
+well as the temperature of up to one external diode. It is compatible
+with many other devices such as the LM86, the LM89, the LM99, the ADM1032,
+the MAX6657, MAX6658 and the MAX6659 all of which are supported by this driver.
+Note that there is no easy way to differentiate between the last three
+variants. The extra address and features of the MAX6659 are not supported by
+this driver. Additionally, the ADT7461 is supported if found in ADM1032
+compatibility mode.
+
+The specificity of this family of chipsets over the ADM1021/LM84
+family is that it features critical limits with hysteresis, and an
+increased resolution of the remote temperature measurement.
+
+The different chipsets of the family are not strictly identical, although
+very similar. This driver doesn't handle any specific feature for now,
+but could if there ever was a need for it. For reference, here comes a
+non-exhaustive list of specific features:
+
+LM90:
+ * Filter and alert configuration register at 0xBF.
+ * ALERT is triggered by temperatures over critical limits.
+
+LM86 and LM89:
+ * Same as LM90
+ * Better external channel accuracy
+
+LM99:
+ * Same as LM89
+ * External temperature shifted by 16 degrees down
+
+ADM1032:
+ * Consecutive alert register at 0x22.
+ * Conversion averaging.
+ * Up to 64 conversions/s.
+ * ALERT is triggered by open remote sensor.
+
+ADT7461
+ * Extended temperature range (breaks compatibility)
+ * Lower resolution for remote temperature
+
+MAX6657 and MAX6658:
+ * Remote sensor type selection
+
+MAX6659
+ * Selectable address
+ * Second critical temperature limit
+ * Remote sensor type selection
+
+All temperature values are given in degrees Celsius. Resolution
+is 1.0 degree for the local temperature, 0.125 degree for the remote
+temperature.
+
+Each sensor has its own high and low limits, plus a critical limit.
+Additionally, there is a relative hysteresis value common to both critical
+values. To make life easier to user-space applications, two absolute values
+are exported, one for each channel, but these values are of course linked.
+Only the local hysteresis can be set from user-space, and the same delta
+applies to the remote hysteresis.
+
+The lm90 driver will not update its values more frequently than every
+other second; reading them more often will do no harm, but will return
+'old' values.
+
diff --git a/Documentation/i2c/chips/lm92 b/Documentation/i2c/chips/lm92
new file mode 100644
index 0000000000000000000000000000000000000000..7705bfaa070856666a2cce8678ca8b1dac886376
--- /dev/null
+++ b/Documentation/i2c/chips/lm92
@@ -0,0 +1,37 @@
+Kernel driver lm92
+==================
+
+Supported chips:
+ * National Semiconductor LM92
+ Prefix: 'lm92'
+ Addresses scanned: I2C 0x48 - 0x4b
+ Datasheet: http://www.national.com/pf/LM/LM92.html
+ * National Semiconductor LM76
+ Prefix: 'lm92'
+ Addresses scanned: none, force parameter needed
+ Datasheet: http://www.national.com/pf/LM/LM76.html
+ * Maxim MAX6633/MAX6634/MAX6635
+ Prefix: 'lm92'
+ Addresses scanned: I2C 0x48 - 0x4b
+ MAX6633 with address in 0x40 - 0x47, 0x4c - 0x4f needs force parameter
+ and MAX6634 with address in 0x4c - 0x4f needs force parameter
+ Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074
+
+Authors:
+ Abraham van der Merwe
+ Jean Delvare
+
+
+Description
+-----------
+
+This driver implements support for the National Semiconductor LM92
+temperature sensor.
+
+Each LM92 temperature sensor supports a single temperature sensor. There are
+alarms for high, low, and critical thresholds. There's also an hysteresis to
+control the thresholds for resetting alarms.
+
+Support was added later for the LM76 and Maxim MAX6633/MAX6634/MAX6635,
+which are mostly compatible. They have not all been tested, so you
+may need to use the force parameter.
diff --git a/Documentation/i2c/chips/max1619 b/Documentation/i2c/chips/max1619
new file mode 100644
index 0000000000000000000000000000000000000000..d6f8d9cd7d7f54dd7b78fb3d2207bee09e5b4f4e
--- /dev/null
+++ b/Documentation/i2c/chips/max1619
@@ -0,0 +1,29 @@
+Kernel driver max1619
+=====================
+
+Supported chips:
+ * Maxim MAX1619
+ Prefix: 'max1619'
+ Addresses scanned: I2C 0x18-0x1a, 0x29-0x2b, 0x4c-0x4e
+ Datasheet: Publicly available at the Maxim website
+ http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf
+
+Authors:
+ Alexey Fisher ,
+ Jean Delvare
+
+Description
+-----------
+
+The MAX1619 is a digital temperature sensor. It senses its own temperature as
+well as the temperature of up to one external diode.
+
+All temperature values are given in degrees Celsius. Resolution
+is 1.0 degree for the local temperature and for the remote temperature.
+
+Only the external sensor has high and low limits.
+
+The max1619 driver will not update its values more frequently than every
+other second; reading them more often will do no harm, but will return
+'old' values.
+
diff --git a/Documentation/i2c/chips/max6875 b/Documentation/i2c/chips/max6875
new file mode 100644
index 0000000000000000000000000000000000000000..b4fb49b4181335c14bb247eed7a632692b323780
--- /dev/null
+++ b/Documentation/i2c/chips/max6875
@@ -0,0 +1,54 @@
+Kernel driver max6875
+=====================
+
+Supported chips:
+ * Maxim max6874, max6875
+ Prefixes: 'max6875'
+ Addresses scanned: 0x50, 0x52
+ Datasheets:
+ http://pdfserv.maxim-ic.com/en/ds/MAX6874-MAX6875.pdf
+
+Author: Ben Gardner
+
+
+Module Parameters
+-----------------
+
+* allow_write int
+ Set to non-zero to enable write permission:
+ *0: Read only
+ 1: Read and write
+
+
+Description
+-----------
+
+The MAXIM max6875 is a EEPROM-programmable power-supply sequencer/supervisor.
+It provides timed outputs that can be used as a watchdog, if properly wired.
+It also provides 512 bytes of user EEPROM.
+
+At reset, the max6875 reads the configuration eeprom into its configuration
+registers. The chip then begins to operate according to the values in the
+registers.
+
+See the datasheet for details on how to program the EEPROM.
+
+
+Sysfs entries
+-------------
+
+eeprom_user - 512 bytes of user-defined EEPROM space. Only writable if
+ allow_write was set and register 0x43 is 0.
+
+eeprom_config - 70 bytes of config EEPROM. Note that changes will not get
+ loaded into register space until a power cycle or device reset.
+
+reg_config - 70 bytes of register space. Any changes take affect immediately.
+
+
+General Remarks
+---------------
+
+A typical application will require that the EEPROMs be programmed once and
+never altered afterwards.
+
diff --git a/Documentation/i2c/chips/pc87360 b/Documentation/i2c/chips/pc87360
new file mode 100644
index 0000000000000000000000000000000000000000..89a8fcfa78dfa117a23db2fdd4bed90313a6cb18
--- /dev/null
+++ b/Documentation/i2c/chips/pc87360
@@ -0,0 +1,189 @@
+Kernel driver pc87360
+=====================
+
+Supported chips:
+ * National Semiconductor PC87360, PC87363, PC87364, PC87365 and PC87366
+ Prefixes: 'pc87360', 'pc87363', 'pc87364', 'pc87365', 'pc87366'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheets:
+ http://www.national.com/pf/PC/PC87360.html
+ http://www.national.com/pf/PC/PC87363.html
+ http://www.national.com/pf/PC/PC87364.html
+ http://www.national.com/pf/PC/PC87365.html
+ http://www.national.com/pf/PC/PC87366.html
+
+Authors: Jean Delvare
+
+Thanks to Sandeep Mehta, Tonko de Rooy and Daniel Ceregatti for testing.
+Thanks to Rudolf Marek for helping me investigate conversion issues.
+
+
+Module Parameters
+-----------------
+
+* init int
+ Chip initialization level:
+ 0: None
+ *1: Forcibly enable internal voltage and temperature channels, except in9
+ 2: Forcibly enable all voltage and temperature channels, except in9
+ 3: Forcibly enable all voltage and temperature channels, including in9
+
+Note that this parameter has no effect for the PC87360, PC87363 and PC87364
+chips.
+
+Also note that for the PC87366, initialization levels 2 and 3 don't enable
+all temperature channels, because some of them share pins with each other,
+so they can't be used at the same time.
+
+
+Description
+-----------
+
+The National Semiconductor PC87360 Super I/O chip contains monitoring and
+PWM control circuitry for two fans. The PC87363 chip is similar, and the
+PC87364 chip has monitoring and PWM control for a third fan.
+
+The National Semiconductor PC87365 and PC87366 Super I/O chips are complete
+hardware monitoring chipsets, not only controlling and monitoring three fans,
+but also monitoring eleven voltage inputs and two (PC87365) or up to four
+(PC87366) temperatures.
+
+ Chip #vin #fan #pwm #temp devid
+
+ PC87360 - 2 2 - 0xE1
+ PC87363 - 2 2 - 0xE8
+ PC87364 - 3 3 - 0xE4
+ PC87365 11 3 3 2 0xE5
+ PC87366 11 3 3 3-4 0xE9
+
+The driver assumes that no more than one chip is present, and one of the
+standard Super I/O addresses is used (0x2E/0x2F or 0x4E/0x4F)
+
+Fan Monitoring
+--------------
+
+Fan rotation speeds are reported in RPM (revolutions per minute). An alarm
+is triggered if the rotation speed has dropped below a programmable limit.
+A different alarm is triggered if the fan speed is too low to be measured.
+
+Fan readings are affected by a programmable clock divider, giving the
+readings more range or accuracy. Usually, users have to learn how it works,
+but this driver implements dynamic clock divider selection, so you don't
+have to care no more.
+
+For reference, here are a few values about clock dividers:
+
+ slowest accuracy highest
+ measurable around 3000 accurate
+ divider speed (RPM) RPM (RPM) speed (RPM)
+ 1 1882 18 6928
+ 2 941 37 4898
+ 4 470 74 3464
+ 8 235 150 2449
+
+For the curious, here is how the values above were computed:
+ * slowest measurable speed: clock/(255*divider)
+ * accuracy around 3000 RPM: 3000^2/clock
+ * highest accurate speed: sqrt(clock*100)
+The clock speed for the PC87360 family is 480 kHz. I arbitrarily chose 100
+RPM as the lowest acceptable accuracy.
+
+As mentioned above, you don't have to care about this no more.
+
+Note that not all RPM values can be represented, even when the best clock
+divider is selected. This is not only true for the measured speeds, but
+also for the programmable low limits, so don't be surprised if you try to
+set, say, fan1_min to 2900 and it finally reads 2909.
+
+
+Fan Control
+-----------
+
+PWM (pulse width modulation) values range from 0 to 255, with 0 meaning
+that the fan is stopped, and 255 meaning that the fan goes at full speed.
+
+Be extremely careful when changing PWM values. Low PWM values, even
+non-zero, can stop the fan, which may cause irreversible damage to your
+hardware if temperature increases too much. When changing PWM values, go
+step by step and keep an eye on temperatures.
+
+One user reported problems with PWM. Changing PWM values would break fan
+speed readings. No explanation nor fix could be found.
+
+
+Temperature Monitoring
+----------------------
+
+Temperatures are reported in degrees Celsius. Each temperature measured has
+associated low, high and overtemperature limits, each of which triggers an
+alarm when crossed.
+
+The first two temperature channels are external. The third one (PC87366
+only) is internal.
+
+The PC87366 has three additional temperature channels, based on
+thermistors (as opposed to thermal diodes for the first three temperature
+channels). For technical reasons, these channels are held by the VLM
+(voltage level monitor) logical device, not the TMS (temperature
+measurement) one. As a consequence, these temperatures are exported as
+voltages, and converted into temperatures in user-space.
+
+Note that these three additional channels share their pins with the
+external thermal diode channels, so you (physically) can't use them all at
+the same time. Although it should be possible to mix the two sensor types,
+the documents from National Semiconductor suggest that motherboard
+manufacturers should choose one type and stick to it. So you will more
+likely have either channels 1 to 3 (thermal diodes) or 3 to 6 (internal
+thermal diode, and thermistors).
+
+
+Voltage Monitoring
+------------------
+
+Voltages are reported relatively to a reference voltage, either internal or
+external. Some of them (in7:Vsb, in8:Vdd and in10:AVdd) are divided by two
+internally, you will have to compensate in sensors.conf. Others (in0 to in6)
+are likely to be divided externally. The meaning of each of these inputs as
+well as the values of the resistors used for division is left to the
+motherboard manufacturers, so you will have to document yourself and edit
+sensors.conf accordingly. National Semiconductor has a document with
+recommended resistor values for some voltages, but this still leaves much
+room for per motherboard specificities, unfortunately. Even worse,
+motherboard manufacturers don't seem to care about National Semiconductor's
+recommendations.
+
+Each voltage measured has associated low and high limits, each of which
+triggers an alarm when crossed.
+
+When available, VID inputs are used to provide the nominal CPU Core voltage.
+The driver will default to VRM 9.0, but this can be changed from user-space.
+The chipsets can handle two sets of VID inputs (on dual-CPU systems), but
+the driver will only export one for now. This may change later if there is
+a need.
+
+
+General Remarks
+---------------
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may already
+have disappeared! Note that all hardware registers are read whenever any
+data is read (unless it is less than 2 seconds since the last update, in
+which case cached values are returned instead). As a consequence, when
+a once-only alarm triggers, it may take 2 seconds for it to show, and 2
+more seconds for it to disappear.
+
+Monitoring of in9 isn't enabled at lower init levels (<3) because that
+channel measures the battery voltage (Vbat). It is a known fact that
+repeatedly sampling the battery voltage reduces its lifetime. National
+Semiconductor smartly designed their chipset so that in9 is sampled only
+once every 1024 sampling cycles (that is every 34 minutes at the default
+sampling rate), so the effect is attenuated, but still present.
+
+
+Limitations
+-----------
+
+The datasheets suggests that some values (fan mins, fan dividers)
+shouldn't be changed once the monitoring has started, but we ignore that
+recommendation. We'll reconsider if it actually causes trouble.
diff --git a/Documentation/i2c/chips/pca9539 b/Documentation/i2c/chips/pca9539
new file mode 100644
index 0000000000000000000000000000000000000000..c4fce6a135374377bcd5d6aa2277c25f5811914f
--- /dev/null
+++ b/Documentation/i2c/chips/pca9539
@@ -0,0 +1,47 @@
+Kernel driver pca9539
+=====================
+
+Supported chips:
+ * Philips PCA9539
+ Prefix: 'pca9539'
+ Addresses scanned: 0x74 - 0x77
+ Datasheet:
+ http://www.semiconductors.philips.com/acrobat/datasheets/PCA9539_2.pdf
+
+Author: Ben Gardner
+
+
+Description
+-----------
+
+The Philips PCA9539 is a 16 bit low power I/O device.
+All 16 lines can be individually configured as an input or output.
+The input sense can also be inverted.
+The 16 lines are split between two bytes.
+
+
+Sysfs entries
+-------------
+
+Each is a byte that maps to the 8 I/O bits.
+A '0' suffix is for bits 0-7, while '1' is for bits 8-15.
+
+input[01] - read the current value
+output[01] - sets the output value
+direction[01] - direction of each bit: 1=input, 0=output
+invert[01] - toggle the input bit sense
+
+input reads the actual state of the line and is always available.
+The direction defaults to input for all channels.
+
+
+General Remarks
+---------------
+
+Note that each output, direction, and invert entry controls 8 lines.
+You should use the read, modify, write sequence.
+For example. to set output bit 0 of 1.
+ val=$(cat output0)
+ val=$(( $val | 1 ))
+ echo $val > output0
+
diff --git a/Documentation/i2c/chips/pcf8574 b/Documentation/i2c/chips/pcf8574
new file mode 100644
index 0000000000000000000000000000000000000000..2752c8ce3167c523eaf14bc82d975268cd502515
--- /dev/null
+++ b/Documentation/i2c/chips/pcf8574
@@ -0,0 +1,69 @@
+Kernel driver pcf8574
+=====================
+
+Supported chips:
+ * Philips PCF8574
+ Prefix: 'pcf8574'
+ Addresses scanned: I2C 0x20 - 0x27
+ Datasheet: Publicly available at the Philips Semiconductors website
+ http://www.semiconductors.philips.com/pip/PCF8574P.html
+
+ * Philips PCF8574A
+ Prefix: 'pcf8574a'
+ Addresses scanned: I2C 0x38 - 0x3f
+ Datasheet: Publicly available at the Philips Semiconductors website
+ http://www.semiconductors.philips.com/pip/PCF8574P.html
+
+Authors:
+ Frodo Looijaard ,
+ Philip Edelbrock ,
+ Dan Eaton ,
+ Aurelien Jarno ,
+ Jean Delvare ,
+
+
+Description
+-----------
+The PCF8574(A) is an 8-bit I/O expander for the I2C bus produced by Philips
+Semiconductors. It is designed to provide a byte I2C interface to up to 16
+separate devices (8 x PCF8574 and 8 x PCF8574A).
+
+This device consists of a quasi-bidirectional port. Each of the eight I/Os
+can be independently used as an input or output. To setup an I/O as an
+input, you have to write a 1 to the corresponding output.
+
+For more informations see the datasheet.
+
+
+Accessing PCF8574(A) via /sys interface
+-------------------------------------
+
+! Be careful !
+The PCF8574(A) is plainly impossible to detect ! Stupid chip.
+So every chip with address in the interval [20..27] and [38..3f] are
+detected as PCF8574(A). If you have other chips in this address
+range, the workaround is to load this module after the one
+for your others chips.
+
+On detection (i.e. insmod, modprobe et al.), directories are being
+created for each detected PCF8574(A):
+
+/sys/bus/i2c/devices/<0>-<1>/
+where <0> is the bus the chip was detected on (e. g. i2c-0)
+and <1> the chip address ([20..27] or [38..3f]):
+
+(example: /sys/bus/i2c/devices/1-0020/)
+
+Inside these directories, there are two files each:
+read and write (and one file with chip name).
+
+The read file is read-only. Reading gives you the current I/O input
+if the corresponding output is set as 1, otherwise the current output
+value, that is to say 0.
+
+The write file is read/write. Writing a value outputs it on the I/O
+port. Reading returns the last written value.
+
+On module initialization the chip is configured as eight inputs (all
+outputs to 1), so you can connect any circuit to the PCF8574(A) without
+being afraid of short-circuit.
diff --git a/Documentation/i2c/chips/pcf8591 b/Documentation/i2c/chips/pcf8591
new file mode 100644
index 0000000000000000000000000000000000000000..5628fcf4207f787fa3ab33fc07c377f4e1c8e196
--- /dev/null
+++ b/Documentation/i2c/chips/pcf8591
@@ -0,0 +1,90 @@
+Kernel driver pcf8591
+=====================
+
+Supported chips:
+ * Philips PCF8591
+ Prefix: 'pcf8591'
+ Addresses scanned: I2C 0x48 - 0x4f
+ Datasheet: Publicly available at the Philips Semiconductor website
+ http://www.semiconductors.philips.com/pip/PCF8591P.html
+
+Authors:
+ Aurelien Jarno
+ valuable contributions by Jan M. Sendler ,
+ Jean Delvare
+
+
+Description
+-----------
+The PCF8591 is an 8-bit A/D and D/A converter (4 analog inputs and one
+analog output) for the I2C bus produced by Philips Semiconductors. It
+is designed to provide a byte I2C interface to up to 4 separate devices.
+
+The PCF8591 has 4 analog inputs programmable as single-ended or
+differential inputs :
+- mode 0 : four single ended inputs
+ Pins AIN0 to AIN3 are single ended inputs for channels 0 to 3
+
+- mode 1 : three differential inputs
+ Pins AIN3 is the common negative differential input
+ Pins AIN0 to AIN2 are positive differential inputs for channels 0 to 2
+
+- mode 2 : single ended and differential mixed
+ Pins AIN0 and AIN1 are single ended inputs for channels 0 and 1
+ Pins AIN2 is the positive differential input for channel 3
+ Pins AIN3 is the negative differential input for channel 3
+
+- mode 3 : two differential inputs
+ Pins AIN0 is the positive differential input for channel 0
+ Pins AIN1 is the negative differential input for channel 0
+ Pins AIN2 is the positive differential input for channel 1
+ Pins AIN3 is the negative differential input for channel 1
+
+See the datasheet for details.
+
+Module parameters
+-----------------
+
+* input_mode int
+
+ Analog input mode:
+ 0 = four single ended inputs
+ 1 = three differential inputs
+ 2 = single ended and differential mixed
+ 3 = two differential inputs
+
+
+Accessing PCF8591 via /sys interface
+-------------------------------------
+
+! Be careful !
+The PCF8591 is plainly impossible to detect ! Stupid chip.
+So every chip with address in the interval [48..4f] is
+detected as PCF8591. If you have other chips in this address
+range, the workaround is to load this module after the one
+for your others chips.
+
+On detection (i.e. insmod, modprobe et al.), directories are being
+created for each detected PCF8591:
+
+/sys/bus/devices/<0>-<1>/
+where <0> is the bus the chip was detected on (e. g. i2c-0)
+and <1> the chip address ([48..4f])
+
+Inside these directories, there are such files:
+in0, in1, in2, in3, out0_enable, out0_output, name
+
+Name contains chip name.
+
+The in0, in1, in2 and in3 files are RO. Reading gives the value of the
+corresponding channel. Depending on the current analog inputs configuration,
+files in2 and/or in3 do not exist. Values range are from 0 to 255 for single
+ended inputs and -128 to +127 for differential inputs (8-bit ADC).
+
+The out0_enable file is RW. Reading gives "1" for analog output enabled and
+"0" for analog output disabled. Writing accepts "0" and "1" accordingly.
+
+The out0_output file is RW. Writing a number between 0 and 255 (8-bit DAC), send
+the value to the digital-to-analog converter. Note that a voltage will
+only appears on AOUT pin if aout0_enable equals 1. Reading returns the last
+value written.
diff --git a/Documentation/i2c/chips/sis5595 b/Documentation/i2c/chips/sis5595
new file mode 100644
index 0000000000000000000000000000000000000000..b7ae36b8cdf53bc1ed82c727687543754edf9e92
--- /dev/null
+++ b/Documentation/i2c/chips/sis5595
@@ -0,0 +1,106 @@
+Kernel driver sis5595
+=====================
+
+Supported chips:
+ * Silicon Integrated Systems Corp. SiS5595 Southbridge Hardware Monitor
+ Prefix: 'sis5595'
+ Addresses scanned: ISA in PCI-space encoded address
+ Datasheet: Publicly available at the Silicon Integrated Systems Corp. site.
+
+Authors:
+ Kyösti Mälkki ,
+ Mark D. Studebaker ,
+ Aurelien Jarno 2.6 port
+
+ SiS southbridge has a LM78-like chip integrated on the same IC.
+ This driver is a customized copy of lm78.c
+
+ Supports following revisions:
+ Version PCI ID PCI Revision
+ 1 1039/0008 AF or less
+ 2 1039/0008 B0 or greater
+
+ Note: these chips contain a 0008 device which is incompatible with the
+ 5595. We recognize these by the presence of the listed
+ "blacklist" PCI ID and refuse to load.
+
+ NOT SUPPORTED PCI ID BLACKLIST PCI ID
+ 540 0008 0540
+ 550 0008 0550
+ 5513 0008 5511
+ 5581 0008 5597
+ 5582 0008 5597
+ 5597 0008 5597
+ 630 0008 0630
+ 645 0008 0645
+ 730 0008 0730
+ 735 0008 0735
+
+
+Module Parameters
+-----------------
+force_addr=0xaddr Set the I/O base address. Useful for boards
+ that don't set the address in the BIOS. Does not do a
+ PCI force; the device must still be present in lspci.
+ Don't use this unless the driver complains that the
+ base address is not set.
+ Example: 'modprobe sis5595 force_addr=0x290'
+
+
+Description
+-----------
+
+The SiS5595 southbridge has integrated hardware monitor functions. It also
+has an I2C bus, but this driver only supports the hardware monitor. For the
+I2C bus driver see i2c-sis5595.
+
+The SiS5595 implements zero or one temperature sensor, two fan speed
+sensors, four or five voltage sensors, and alarms.
+
+On the first version of the chip, there are four voltage sensors and one
+temperature sensor.
+
+On the second version of the chip, the temperature sensor (temp) and the
+fifth voltage sensor (in4) share a pin which is configurable, but not
+through the driver. Sorry. The driver senses the configuration of the pin,
+which was hopefully set by the BIOS.
+
+Temperatures are measured in degrees Celsius. An alarm is triggered once
+when the max is crossed; it is also triggered when it drops below the min
+value. Measurements are guaranteed between -55 and +125 degrees, with a
+resolution of 1 degree.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+Voltage sensors (also known as IN sensors) report their values in volts. An
+alarm is triggered if the voltage has crossed a programmable minimum or
+maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. All voltage
+inputs can measure voltages between 0 and 4.08 volts, with a resolution of
+0.016 volt.
+
+In addition to the alarms described above, there is a BTI alarm, which gets
+triggered when an external chip has crossed its limits. Usually, this is
+connected to some LM75-like chip; if at least one crosses its limits, this
+bit gets set.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may already
+have disappeared! Note that in the current implementation, all hardware
+registers are read whenever any data is read (unless it is less than 1.5
+seconds since the last update). This means that you can easily miss
+once-only alarms.
+
+The SiS5595 only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
+
+Problems
+--------
+Some chips refuse to be enabled. We don't know why.
+The driver will recognize this and print a message in dmesg.
+
diff --git a/Documentation/i2c/chips/smsc47b397.txt b/Documentation/i2c/chips/smsc47b397
similarity index 78%
rename from Documentation/i2c/chips/smsc47b397.txt
rename to Documentation/i2c/chips/smsc47b397
index 389edae7f8df7cefff3e60d172073917eadbb861..da9d80c9643286183750fd978aec69ac78e0633b 100644
--- a/Documentation/i2c/chips/smsc47b397.txt
+++ b/Documentation/i2c/chips/smsc47b397
@@ -1,7 +1,19 @@
+Kernel driver smsc47b397
+========================
+
+Supported chips:
+ * SMSC LPC47B397-NC
+ Prefix: 'smsc47b397'
+ Addresses scanned: none, address read from Super I/O config space
+ Datasheet: In this file
+
+Authors: Mark M. Hoffman
+ Utilitek Systems, Inc.
+
November 23, 2004
The following specification describes the SMSC LPC47B397-NC sensor chip
-(for which there is no public datasheet available). This document was
+(for which there is no public datasheet available). This document was
provided by Craig Kelly (In-Store Broadcast Network) and edited/corrected
by Mark M. Hoffman .
@@ -10,10 +22,10 @@ by Mark M. Hoffman .
Methods for detecting the HP SIO and reading the thermal data on a dc7100.
The thermal information on the dc7100 is contained in the SIO Hardware Monitor
-(HWM). The information is accessed through an index/data pair. The index/data
-pair is located at the HWM Base Address + 0 and the HWM Base Address + 1. The
+(HWM). The information is accessed through an index/data pair. The index/data
+pair is located at the HWM Base Address + 0 and the HWM Base Address + 1. The
HWM Base address can be obtained from Logical Device 8, registers 0x60 (MSB)
-and 0x61 (LSB). Currently we are using 0x480 for the HWM Base Address and
+and 0x61 (LSB). Currently we are using 0x480 for the HWM Base Address and
0x480 and 0x481 for the index/data pair.
Reading temperature information.
@@ -50,7 +62,7 @@ Reading the tach LSB locks the tach MSB.
The LSB Must be read first.
How to convert the tach reading to RPM.
-The tach reading (TCount) is given by: (Tach MSB * 256) + (Tach LSB)
+The tach reading (TCount) is given by: (Tach MSB * 256) + (Tach LSB)
The SIO counts the number of 90kHz (11.111us) pulses per revolution.
RPM = 60/(TCount * 11.111us)
@@ -72,20 +84,20 @@ To program the configuration registers, the following sequence must be followed:
Enter Configuration Mode
To place the chip into the Configuration State The config key (0x55) is written
-to the CONFIG PORT (0x2E).
+to the CONFIG PORT (0x2E).
Configuration Mode
In configuration mode, the INDEX PORT is located at the CONFIG PORT address and
the DATA PORT is at INDEX PORT address + 1.
-The desired configuration registers are accessed in two steps:
+The desired configuration registers are accessed in two steps:
a. Write the index of the Logical Device Number Configuration Register
(i.e., 0x07) to the INDEX PORT and then write the number of the
desired logical device to the DATA PORT.
b. Write the address of the desired configuration register within the
logical device to the INDEX PORT and then write or read the config-
- uration register through the DATA PORT.
+ uration register through the DATA PORT.
Note: If accessing the Global Configuration Registers, step (a) is not required.
@@ -96,18 +108,18 @@ The chip returns to the RUN State. (This is important).
Programming Example
The following is an example of how to read the SIO Device ID located at 0x20
-; ENTER CONFIGURATION MODE
+; ENTER CONFIGURATION MODE
MOV DX,02EH
MOV AX,055H
OUT DX,AL
-; GLOBAL CONFIGURATION REGISTER
+; GLOBAL CONFIGURATION REGISTER
MOV DX,02EH
MOV AL,20H
-OUT DX,AL
+OUT DX,AL
; READ THE DATA
MOV DX,02FH
IN AL,DX
-; EXIT CONFIGURATION MODE
+; EXIT CONFIGURATION MODE
MOV DX,02EH
MOV AX,0AAH
OUT DX,AL
@@ -122,12 +134,12 @@ Obtaining the HWM Base Address.
The following is an example of how to read the HWM Base Address located in
Logical Device 8.
-; ENTER CONFIGURATION MODE
+; ENTER CONFIGURATION MODE
MOV DX,02EH
MOV AX,055H
OUT DX,AL
-; CONFIGURE REGISTER CRE0,
-; LOGICAL DEVICE 8
+; CONFIGURE REGISTER CRE0,
+; LOGICAL DEVICE 8
MOV DX,02EH
MOV AL,07H
OUT DX,AL ;Point to LD# Config Reg
@@ -135,12 +147,12 @@ MOV DX,02FH
MOV AL, 08H
OUT DX,AL;Point to Logical Device 8
;
-MOV DX,02EH
+MOV DX,02EH
MOV AL,60H
OUT DX,AL ; Point to HWM Base Addr MSB
MOV DX,02FH
IN AL,DX ; Get MSB of HWM Base Addr
-; EXIT CONFIGURATION MODE
+; EXIT CONFIGURATION MODE
MOV DX,02EH
MOV AX,0AAH
OUT DX,AL
diff --git a/Documentation/i2c/chips/smsc47m1 b/Documentation/i2c/chips/smsc47m1
new file mode 100644
index 0000000000000000000000000000000000000000..34e6478c14256ceff5427c49953598e67a35545c
--- /dev/null
+++ b/Documentation/i2c/chips/smsc47m1
@@ -0,0 +1,52 @@
+Kernel driver smsc47m1
+======================
+
+Supported chips:
+ * SMSC LPC47B27x, LPC47M10x, LPC47M13x, LPC47M14x, LPC47M15x and LPC47M192
+ Addresses scanned: none, address read from Super I/O config space
+ Prefix: 'smsc47m1'
+ Datasheets:
+ http://www.smsc.com/main/datasheets/47b27x.pdf
+ http://www.smsc.com/main/datasheets/47m10x.pdf
+ http://www.smsc.com/main/tools/discontinued/47m13x.pdf
+ http://www.smsc.com/main/datasheets/47m14x.pdf
+ http://www.smsc.com/main/tools/discontinued/47m15x.pdf
+ http://www.smsc.com/main/datasheets/47m192.pdf
+
+Authors:
+ Mark D. Studebaker ,
+ With assistance from Bruce Allen , and his
+ fan.c program: http://www.lsc-group.phys.uwm.edu/%7Eballen/driver/
+ Gabriele Gorla ,
+ Jean Delvare
+
+Description
+-----------
+
+The Standard Microsystems Corporation (SMSC) 47M1xx Super I/O chips
+contain monitoring and PWM control circuitry for two fans.
+
+The 47M15x and 47M192 chips contain a full 'hardware monitoring block'
+in addition to the fan monitoring and control. The hardware monitoring
+block is not supported by the driver.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+PWM values are from 0 to 255.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared! Note that in the current implementation, all
+hardware registers are read whenever any data is read (unless it is less
+than 1.5 seconds since the last update). This means that you can easily
+miss once-only alarms.
+
+
+**********************
+The lm_sensors project gratefully acknowledges the support of
+Intel in the development of this driver.
diff --git a/Documentation/i2c/chips/via686a b/Documentation/i2c/chips/via686a
new file mode 100644
index 0000000000000000000000000000000000000000..b82014cb7c53f10ba376c6e7236e6f82ca82aa49
--- /dev/null
+++ b/Documentation/i2c/chips/via686a
@@ -0,0 +1,65 @@
+Kernel driver via686a
+=====================
+
+Supported chips:
+ * Via VT82C686A, VT82C686B Southbridge Integrated Hardware Monitor
+ Prefix: 'via686a'
+ Addresses scanned: ISA in PCI-space encoded address
+ Datasheet: On request through web form (http://www.via.com.tw/en/support/datasheets/)
+
+Authors:
+ Kyösti Mälkki ,
+ Mark D. Studebaker
+ Bob Dougherty
+ (Some conversion-factor data were contributed by
+ Jonathan Teh Soon Yew
+ and Alex van Kaam .)
+
+Module Parameters
+-----------------
+
+force_addr=0xaddr Set the I/O base address. Useful for Asus A7V boards
+ that don't set the address in the BIOS. Does not do a
+ PCI force; the via686a must still be present in lspci.
+ Don't use this unless the driver complains that the
+ base address is not set.
+ Example: 'modprobe via686a force_addr=0x6000'
+
+Description
+-----------
+
+The driver does not distinguish between the chips and reports
+all as a 686A.
+
+The Via 686a southbridge has integrated hardware monitor functionality.
+It also has an I2C bus, but this driver only supports the hardware monitor.
+For the I2C bus driver, see
+
+The Via 686a implements three temperature sensors, two fan rotation speed
+sensors, five voltage sensors and alarms.
+
+Temperatures are measured in degrees Celsius. An alarm is triggered once
+when the Overtemperature Shutdown limit is crossed; it is triggered again
+as soon as it drops below the hysteresis value.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8) to give
+the readings more range or accuracy. Not all RPM values can accurately be
+represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+Voltage sensors (also known as IN sensors) report their values in volts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit. Voltages are internally scalled, so each voltage channel
+has a different resolution and range.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared! Note that in the current implementation, all
+hardware registers are read whenever any data is read (unless it is less
+than 1.5 seconds since the last update). This means that you can easily
+miss once-only alarms.
+
+The driver only updates its values each 1.5 seconds; reading it more often
+will do no harm, but will return 'old' values.
diff --git a/Documentation/i2c/chips/w83627hf b/Documentation/i2c/chips/w83627hf
new file mode 100644
index 0000000000000000000000000000000000000000..78f37c2d602e0a1d9ac5f0efc6b533a77240120a
--- /dev/null
+++ b/Documentation/i2c/chips/w83627hf
@@ -0,0 +1,66 @@
+Kernel driver w83627hf
+======================
+
+Supported chips:
+ * Winbond W83627HF (ISA accesses ONLY)
+ Prefix: 'w83627hf'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf
+ * Winbond W83627THF
+ Prefix: 'w83627thf'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: http://www.winbond.com/PDF/sheet/w83627thf.pdf
+ * Winbond W83697HF
+ Prefix: 'w83697hf'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: http://www.winbond.com/PDF/sheet/697hf.pdf
+ * Winbond W83637HF
+ Prefix: 'w83637hf'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: http://www.winbond.com/PDF/sheet/w83637hf.pdf
+
+Authors:
+ Frodo Looijaard ,
+ Philip Edelbrock ,
+ Mark Studebaker ,
+ Bernhard C. Schrenk
+
+Module Parameters
+-----------------
+
+* force_addr: int
+ Initialize the ISA address of the sensors
+* force_i2c: int
+ Initialize the I2C address of the sensors
+* init: int
+ (default is 1)
+ Use 'init=0' to bypass initializing the chip.
+ Try this if your computer crashes when you load the module.
+
+Description
+-----------
+
+This driver implements support for ISA accesses *only* for
+the Winbond W83627HF, W83627THF, W83697HF and W83637HF Super I/O chips.
+We will refer to them collectively as Winbond chips.
+
+This driver supports ISA accesses, which should be more reliable
+than i2c accesses. Also, for Tyan boards which contain both a
+Super I/O chip and a second i2c-only Winbond chip (often a W83782D),
+using this driver will avoid i2c address conflicts and complex
+initialization that were required in the w83781d driver.
+
+If you really want i2c accesses for these Super I/O chips,
+use the w83781d driver. However this is not the preferred method
+now that this ISA driver has been developed.
+
+Technically, the w83627thf does not support a VID reading. However, it's
+possible or even likely that your mainboard maker has routed these signals
+to a specific set of general purpose IO pins (the Asus P4C800-E is one such
+board). The w83627thf driver now interprets these as VID. If the VID on
+your board doesn't work, first see doc/vid in the lm_sensors package. If
+that still doesn't help, email us at lm-sensors@lm-sensors.org.
+
+For further information on this driver see the w83781d driver
+documentation.
+
diff --git a/Documentation/i2c/chips/w83781d b/Documentation/i2c/chips/w83781d
new file mode 100644
index 0000000000000000000000000000000000000000..e5459333ba681041e7693ac21917c5f0350b15d3
--- /dev/null
+++ b/Documentation/i2c/chips/w83781d
@@ -0,0 +1,402 @@
+Kernel driver w83781d
+=====================
+
+Supported chips:
+ * Winbond W83781D
+ Prefix: 'w83781d'
+ Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
+ Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83781d.pdf
+ * Winbond W83782D
+ Prefix: 'w83782d'
+ Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
+ Datasheet: http://www.winbond.com/PDF/sheet/w83782d.pdf
+ * Winbond W83783S
+ Prefix: 'w83783s'
+ Addresses scanned: I2C 0x2d
+ Datasheet: http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/w83783s.pdf
+ * Winbond W83627HF
+ Prefix: 'w83627hf'
+ Addresses scanned: I2C 0x20 - 0x2f, ISA 0x290 (8 I/O ports)
+ Datasheet: http://www.winbond.com/PDF/sheet/w83627hf.pdf
+ * Asus AS99127F
+ Prefix: 'as99127f'
+ Addresses scanned: I2C 0x28 - 0x2f
+ Datasheet: Unavailable from Asus
+
+Authors:
+ Frodo Looijaard ,
+ Philip Edelbrock ,
+ Mark Studebaker
+
+Module parameters
+-----------------
+
+* init int
+ (default 1)
+ Use 'init=0' to bypass initializing the chip.
+ Try this if your computer crashes when you load the module.
+
+force_subclients=bus,caddr,saddr,saddr
+ This is used to force the i2c addresses for subclients of
+ a certain chip. Typical usage is `force_subclients=0,0x2d,0x4a,0x4b'
+ to force the subclients of chip 0x2d on bus 0 to i2c addresses
+ 0x4a and 0x4b. This parameter is useful for certain Tyan boards.
+
+Description
+-----------
+
+This driver implements support for the Winbond W83781D, W83782D, W83783S,
+W83627HF chips, and the Asus AS99127F chips. We will refer to them
+collectively as W8378* chips.
+
+There is quite some difference between these chips, but they are similar
+enough that it was sensible to put them together in one driver.
+The W83627HF chip is assumed to be identical to the ISA W83782D.
+The Asus chips are similar to an I2C-only W83782D.
+
+Chip #vin #fanin #pwm #temp wchipid vendid i2c ISA
+as99127f 7 3 0 3 0x31 0x12c3 yes no
+as99127f rev.2 (type_name = as99127f) 0x31 0x5ca3 yes no
+w83781d 7 3 0 3 0x10-1 0x5ca3 yes yes
+w83627hf 9 3 2 3 0x21 0x5ca3 yes yes(LPC)
+w83782d 9 3 2-4 3 0x30 0x5ca3 yes yes
+w83783s 5-6 3 2 1-2 0x40 0x5ca3 yes no
+
+Detection of these chips can sometimes be foiled because they can be in
+an internal state that allows no clean access. If you know the address
+of the chip, use a 'force' parameter; this will put them into a more
+well-behaved state first.
+
+The W8378* implements temperature sensors (three on the W83781D and W83782D,
+two on the W83783S), three fan rotation speed sensors, voltage sensors
+(seven on the W83781D, nine on the W83782D and six on the W83783S), VID
+lines, alarms with beep warnings, and some miscellaneous stuff.
+
+Temperatures are measured in degrees Celsius. There is always one main
+temperature sensor, and one (W83783S) or two (W83781D and W83782D) other
+sensors. An alarm is triggered for the main sensor once when the
+Overtemperature Shutdown limit is crossed; it is triggered again as soon as
+it drops below the Hysteresis value. A more useful behavior
+can be found by setting the Hysteresis value to +127 degrees Celsius; in
+this case, alarms are issued during all the time when the actual temperature
+is above the Overtemperature Shutdown value. The driver sets the
+hysteresis value for temp1 to 127 at initialization.
+
+For the other temperature sensor(s), an alarm is triggered when the
+temperature gets higher then the Overtemperature Shutdown value; it stays
+on until the temperature falls below the Hysteresis value. But on the
+W83781D, there is only one alarm that functions for both other sensors!
+Temperatures are guaranteed within a range of -55 to +125 degrees. The
+main temperature sensors has a resolution of 1 degree; the other sensor(s)
+of 0.5 degree.
+
+Fan rotation speeds are reported in RPM (rotations per minute). An alarm is
+triggered if the rotation speed has dropped below a programmable limit. Fan
+readings can be divided by a programmable divider (1, 2, 4 or 8 for the
+W83781D; 1, 2, 4, 8, 16, 32, 64 or 128 for the others) to give
+the readings more range or accuracy. Not all RPM values can accurately
+be represented, so some rounding is done. With a divider of 2, the lowest
+representable value is around 2600 RPM.
+
+Voltage sensors (also known as IN sensors) report their values in volts.
+An alarm is triggered if the voltage has crossed a programmable minimum
+or maximum limit. Note that minimum in this case always means 'closest to
+zero'; this is important for negative voltage measurements. All voltage
+inputs can measure voltages between 0 and 4.08 volts, with a resolution
+of 0.016 volt.
+
+The VID lines encode the core voltage value: the voltage level your processor
+should work with. This is hardcoded by the mainboard and/or processor itself.
+It is a value in volts. When it is unconnected, you will often find the
+value 3.50 V here.
+
+The W83782D and W83783S temperature conversion machine understands about
+several kinds of temperature probes. You can program the so-called
+beta value in the sensor files. '1' is the PII/Celeron diode, '2' is the
+TN3904 transistor, and 3435 the default thermistor value. Other values
+are (not yet) supported.
+
+In addition to the alarms described above, there is a CHAS alarm on the
+chips which triggers if your computer case is open.
+
+When an alarm goes off, you can be warned by a beeping signal through
+your computer speaker. It is possible to enable all beeping globally,
+or only the beeping for some alarms.
+
+If an alarm triggers, it will remain triggered until the hardware register
+is read at least once. This means that the cause for the alarm may
+already have disappeared! Note that in the current implementation, all
+hardware registers are read whenever any data is read (unless it is less
+than 1.5 seconds since the last update). This means that you can easily
+miss once-only alarms.
+
+The chips only update values each 1.5 seconds; reading them more often
+will do no harm, but will return 'old' values.
+
+AS99127F PROBLEMS
+-----------------
+The as99127f support was developed without the benefit of a datasheet.
+In most cases it is treated as a w83781d (although revision 2 of the
+AS99127F looks more like a w83782d).
+This support will be BETA until a datasheet is released.
+One user has reported problems with fans stopping
+occasionally.
+
+Note that the individual beep bits are inverted from the other chips.
+The driver now takes care of this so that user-space applications
+don't have to know about it.
+
+Known problems:
+ - Problems with diode/thermistor settings (supported?)
+ - One user reports fans stopping under high server load.
+ - Revision 2 seems to have 2 PWM registers but we don't know
+ how to handle them. More details below.
+
+These will not be fixed unless we get a datasheet.
+If you have problems, please lobby Asus to release a datasheet.
+Unfortunately several others have without success.
+Please do not send mail to us asking for better as99127f support.
+We have done the best we can without a datasheet.
+Please do not send mail to the author or the sensors group asking for
+a datasheet or ideas on how to convince Asus. We can't help.
+
+
+NOTES:
+-----
+ 783s has no in1 so that in[2-6] are compatible with the 781d/782d.
+
+ 783s pin is programmable for -5V or temp1; defaults to -5V,
+ no control in driver so temp1 doesn't work.
+
+ 782d and 783s datasheets differ on which is pwm1 and which is pwm2.
+ We chose to follow 782d.
+
+ 782d and 783s pin is programmable for fan3 input or pwm2 output;
+ defaults to fan3 input.
+ If pwm2 is enabled (with echo 255 1 > pwm2), then
+ fan3 will report 0.
+
+ 782d has pwm1-2 for ISA, pwm1-4 for i2c. (pwm3-4 share pins with
+ the ISA pins)
+
+Data sheet updates:
+------------------
+ - PWM clock registers:
+
+ 000: master / 512
+ 001: master / 1024
+ 010: master / 2048
+ 011: master / 4096
+ 100: master / 8192
+
+
+Answers from Winbond tech support
+---------------------------------
+>
+> 1) In the W83781D data sheet section 7.2 last paragraph, it talks about
+> reprogramming the R-T table if the Beta of the thermistor is not
+> 3435K. The R-T table is described briefly in section 8.20.
+> What formulas do I use to program a new R-T table for a given Beta?
+>
+ We are sorry that the calculation for R-T table value is
+confidential. If you have another Beta value of thermistor, we can help
+to calculate the R-T table for you. But you should give us real R-T
+Table which can be gotten by thermistor vendor. Therefore we will calculate
+them and obtain 32-byte data, and you can fill the 32-byte data to the
+register in Bank0.CR51 of W83781D.
+
+
+> 2) In the W83782D data sheet, it mentions that pins 38, 39, and 40 are
+> programmable to be either thermistor or Pentium II diode inputs.
+> How do I program them for diode inputs? I can't find any register
+> to program these to be diode inputs.
+ --> You may program Bank0 CR[5Dh] and CR[59h] registers.
+
+ CR[5Dh] bit 1(VTIN1) bit 2(VTIN2) bit 3(VTIN3)
+
+ thermistor 0 0 0
+ diode 1 1 1
+
+
+(error) CR[59h] bit 4(VTIN1) bit 2(VTIN2) bit 3(VTIN3)
+(right) CR[59h] bit 4(VTIN1) bit 5(VTIN2) bit 6(VTIN3)
+
+ PII thermal diode 1 1 1
+ 2N3904 diode 0 0 0
+
+
+Asus Clones
+-----------
+
+We have no datasheets for the Asus clones (AS99127F and ASB100 Bach).
+Here are some very useful information that were given to us by Alex Van
+Kaam about how to detect these chips, and how to read their values. He
+also gives advice for another Asus chipset, the Mozart-2 (which we
+don't support yet). Thanks Alex!
+I reworded some parts and added personal comments.
+
+# Detection:
+
+AS99127F rev.1, AS99127F rev.2 and ASB100:
+- I2C address range: 0x29 - 0x2F
+- If register 0x58 holds 0x31 then we have an Asus (either ASB100 or
+ AS99127F)
+- Which one depends on register 0x4F (manufacturer ID):
+ 0x06 or 0x94: ASB100
+ 0x12 or 0xC3: AS99127F rev.1
+ 0x5C or 0xA3: AS99127F rev.2
+ Note that 0x5CA3 is Winbond's ID (WEC), which let us think Asus get their
+ AS99127F rev.2 direct from Winbond. The other codes mean ATT and DVC,
+ respectively. ATT could stand for Asustek something (although it would be
+ very badly chosen IMHO), I don't know what DVC could stand for. Maybe
+ these codes simply aren't meant to be decoded that way.
+
+Mozart-2:
+- I2C address: 0x77
+- If register 0x58 holds 0x56 or 0x10 then we have a Mozart-2
+- Of the Mozart there are 3 types:
+ 0x58=0x56, 0x4E=0x94, 0x4F=0x36: Asus ASM58 Mozart-2
+ 0x58=0x56, 0x4E=0x94, 0x4F=0x06: Asus AS2K129R Mozart-2
+ 0x58=0x10, 0x4E=0x5C, 0x4F=0xA3: Asus ??? Mozart-2
+ You can handle all 3 the exact same way :)
+
+# Temperature sensors:
+
+ASB100:
+- sensor 1: register 0x27
+- sensor 2 & 3 are the 2 LM75's on the SMBus
+- sensor 4: register 0x17
+Remark: I noticed that on Intel boards sensor 2 is used for the CPU
+ and 4 is ignored/stuck, on AMD boards sensor 4 is the CPU and sensor 2 is
+ either ignored or a socket temperature.
+
+AS99127F (rev.1 and 2 alike):
+- sensor 1: register 0x27
+- sensor 2 & 3 are the 2 LM75's on the SMBus
+Remark: Register 0x5b is suspected to be temperature type selector. Bit 1
+ would control temp1, bit 3 temp2 and bit 5 temp3.
+
+Mozart-2:
+- sensor 1: register 0x27
+- sensor 2: register 0x13
+
+# Fan sensors:
+
+ASB100, AS99127F (rev.1 and 2 alike):
+- 3 fans, identical to the W83781D
+
+Mozart-2:
+- 2 fans only, 1350000/RPM/div
+- fan 1: register 0x28, divisor on register 0xA1 (bits 4-5)
+- fan 2: register 0x29, divisor on register 0xA1 (bits 6-7)
+
+# Voltages:
+
+This is where there is a difference between AS99127F rev.1 and 2.
+Remark: The difference is similar to the difference between
+ W83781D and W83782D.
+
+ASB100:
+in0=r(0x20)*0.016
+in1=r(0x21)*0.016
+in2=r(0x22)*0.016
+in3=r(0x23)*0.016*1.68
+in4=r(0x24)*0.016*3.8
+in5=r(0x25)*(-0.016)*3.97
+in6=r(0x26)*(-0.016)*1.666
+
+AS99127F rev.1:
+in0=r(0x20)*0.016
+in1=r(0x21)*0.016
+in2=r(0x22)*0.016
+in3=r(0x23)*0.016*1.68
+in4=r(0x24)*0.016*3.8
+in5=r(0x25)*(-0.016)*3.97
+in6=r(0x26)*(-0.016)*1.503
+
+AS99127F rev.2:
+in0=r(0x20)*0.016
+in1=r(0x21)*0.016
+in2=r(0x22)*0.016
+in3=r(0x23)*0.016*1.68
+in4=r(0x24)*0.016*3.8
+in5=(r(0x25)*0.016-3.6)*5.14+3.6
+in6=(r(0x26)*0.016-3.6)*3.14+3.6
+
+Mozart-2:
+in0=r(0x20)*0.016
+in1=255
+in2=r(0x22)*0.016
+in3=r(0x23)*0.016*1.68
+in4=r(0x24)*0.016*4
+in5=255
+in6=255
+
+
+# PWM
+
+Additional info about PWM on the AS99127F (may apply to other Asus
+chips as well) by Jean Delvare as of 2004-04-09:
+
+AS99127F revision 2 seems to have two PWM registers at 0x59 and 0x5A,
+and a temperature sensor type selector at 0x5B (which basically means
+that they swapped registers 0x59 and 0x5B when you compare with Winbond
+chips).
+Revision 1 of the chip also has the temperature sensor type selector at
+0x5B, but PWM registers have no effect.
+
+We don't know exactly how the temperature sensor type selection works.
+Looks like bits 1-0 are for temp1, bits 3-2 for temp2 and bits 5-4 for
+temp3, although it is possible that only the most significant bit matters
+each time. So far, values other than 0 always broke the readings.
+
+PWM registers seem to be split in two parts: bit 7 is a mode selector,
+while the other bits seem to define a value or threshold.
+
+When bit 7 is clear, bits 6-0 seem to hold a threshold value. If the value
+is below a given limit, the fan runs at low speed. If the value is above
+the limit, the fan runs at full speed. We have no clue as to what the limit
+represents. Note that there seem to be some inertia in this mode, speed
+changes may need some time to trigger. Also, an hysteresis mechanism is
+suspected since walking through all the values increasingly and then
+decreasingly led to slightly different limits.
+
+When bit 7 is set, bits 3-0 seem to hold a threshold value, while bits 6-4
+would not be significant. If the value is below a given limit, the fan runs
+at full speed, while if it is above the limit it runs at low speed (so this
+is the contrary of the other mode, in a way). Here again, we don't know
+what the limit is supposed to represent.
+
+One remarkable thing is that the fans would only have two or three
+different speeds (transitional states left apart), not a whole range as
+you usually get with PWM.
+
+As a conclusion, you can write 0x00 or 0x8F to the PWM registers to make
+fans run at low speed, and 0x7F or 0x80 to make them run at full speed.
+
+Please contact us if you can figure out how it is supposed to work. As
+long as we don't know more, the w83781d driver doesn't handle PWM on
+AS99127F chips at all.
+
+Additional info about PWM on the AS99127F rev.1 by Hector Martin:
+
+I've been fiddling around with the (in)famous 0x59 register and
+found out the following values do work as a form of coarse pwm:
+
+0x80 - seems to turn fans off after some time(1-2 minutes)... might be
+some form of auto-fan-control based on temp? hmm (Qfan? this mobo is an
+old ASUS, it isn't marketed as Qfan. Maybe some beta pre-attemp at Qfan
+that was dropped at the BIOS)
+0x81 - off
+0x82 - slightly "on-ner" than off, but my fans do not get to move. I can
+hear the high-pitched PWM sound that motors give off at too-low-pwm.
+0x83 - now they do move. Estimate about 70% speed or so.
+0x84-0x8f - full on
+
+Changing the high nibble doesn't seem to do much except the high bit
+(0x80) must be set for PWM to work, else the current pwm doesn't seem to
+change.
+
+My mobo is an ASUS A7V266-E. This behavior is similar to what I got
+with speedfan under Windows, where 0-15% would be off, 15-2x% (can't
+remember the exact value) would be 70% and higher would be full on.
diff --git a/Documentation/i2c/chips/w83l785ts b/Documentation/i2c/chips/w83l785ts
new file mode 100644
index 0000000000000000000000000000000000000000..1841cedc25b27d02d96d7dfac7b0763da909c8a9
--- /dev/null
+++ b/Documentation/i2c/chips/w83l785ts
@@ -0,0 +1,39 @@
+Kernel driver w83l785ts
+=======================
+
+Supported chips:
+ * Winbond W83L785TS-S
+ Prefix: 'w83l785ts'
+ Addresses scanned: I2C 0x2e
+ Datasheet: Publicly available at the Winbond USA website
+ http://www.winbond-usa.com/products/winbond_products/pdfs/PCIC/W83L785TS-S.pdf
+
+Authors:
+ Jean Delvare
+
+Description
+-----------
+
+The W83L785TS-S is a digital temperature sensor. It senses the
+temperature of a single external diode. The high limit is
+theoretically defined as 85 or 100 degrees C through a combination
+of external resistors, so the user cannot change it. Values seen so
+far suggest that the two possible limits are actually 95 and 110
+degrees C. The datasheet is rather poor and obviously inaccurate
+on several points including this one.
+
+All temperature values are given in degrees Celsius. Resolution
+is 1.0 degree. See the datasheet for details.
+
+The w83l785ts driver will not update its values more frequently than
+every other second; reading them more often will do no harm, but will
+return 'old' values.
+
+Known Issues
+------------
+
+On some systems (Asus), the BIOS is known to interfere with the driver
+and cause read errors. The driver will retry a given number of times
+(5 by default) and then give up, returning the old value (or 0 if
+there is no old value). It seems to work well enough so that you should
+not notice anything. Thanks to James Bolt for helping test this feature.
diff --git a/Documentation/i2c/porting-clients b/Documentation/i2c/porting-clients
index 56404918eabc32b50ed67cbcd6caf1b99610b7d0..a7adbdd9ea8a51aa46298cd48bdd566b1f9566d3 100644
--- a/Documentation/i2c/porting-clients
+++ b/Documentation/i2c/porting-clients
@@ -57,7 +57,7 @@ Technical changes:
Documentation/i2c/sysfs-interface for the individual files. Also
convert the units these files read and write to the specified ones.
If you need to add a new type of file, please discuss it on the
- sensors mailing list by providing a
+ sensors mailing list by providing a
patch to the Documentation/i2c/sysfs-interface file.
* [Attach] For I2C drivers, the attach function should make sure
diff --git a/Documentation/i2c/userspace-tools b/Documentation/i2c/userspace-tools
new file mode 100644
index 0000000000000000000000000000000000000000..2622aac6542221f75c72d1e6ecfb6ffd5ac97dbd
--- /dev/null
+++ b/Documentation/i2c/userspace-tools
@@ -0,0 +1,39 @@
+Introduction
+------------
+
+Most mainboards have sensor chips to monitor system health (like temperatures,
+voltages, fans speed). They are often connected through an I2C bus, but some
+are also connected directly through the ISA bus.
+
+The kernel drivers make the data from the sensor chips available in the /sys
+virtual filesystem. Userspace tools are then used to display or set or the
+data in a more friendly manner.
+
+Lm-sensors
+----------
+
+Core set of utilites that will allow you to obtain health information,
+setup monitoring limits etc. You can get them on their homepage
+http://www.lm-sensors.nu/ or as a package from your Linux distribution.
+
+If from website:
+Get lmsensors from project web site. Please note, you need only userspace
+part, so compile with "make user_install" target.
+
+General hints to get things working:
+
+0) get lm-sensors userspace utils
+1) compile all drivers in I2C section as modules in your kernel
+2) run sensors-detect script, it will tell you what modules you need to load.
+3) load them and run "sensors" command, you should see some results.
+4) fix sensors.conf, labels, limits, fan divisors
+5) if any more problems consult FAQ, or documentation
+
+Other utilites
+--------------
+
+If you want some graphical indicators of system health look for applications
+like: gkrellm, ksensors, xsensors, wmtemp, wmsensors, wmgtemp, ksysguardd,
+hardware-monitor
+
+If you are server administrator you can try snmpd or mrtgutils.
diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients
index ad27511e3c7d7c463f5fdb4ce02ea2d96bd4f0ce..f482dae81de3ec2a27b8ace0814e99d43150ca3e 100644
--- a/Documentation/i2c/writing-clients
+++ b/Documentation/i2c/writing-clients
@@ -171,45 +171,31 @@ The following lists are used internally:
normal_i2c: filled in by the module writer.
A list of I2C addresses which should normally be examined.
- normal_i2c_range: filled in by the module writer.
- A list of pairs of I2C addresses, each pair being an inclusive range of
- addresses which should normally be examined.
probe: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the address. These addresses are also probed, as if they
were in the 'normal' list.
- probe_range: insmod parameter.
- A list of triples. The first value is a bus number (-1 for any I2C bus),
- the second and third are addresses. These form an inclusive range of
- addresses that are also probed, as if they were in the 'normal' list.
ignore: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the I2C address. These addresses are never probed.
This parameter overrules 'normal' and 'probe', but not the 'force' lists.
- ignore_range: insmod parameter.
- A list of triples. The first value is a bus number (-1 for any I2C bus),
- the second and third are addresses. These form an inclusive range of
- I2C addresses that are never probed.
- This parameter overrules 'normal' and 'probe', but not the 'force' lists.
force: insmod parameter.
A list of pairs. The first value is a bus number (-1 for any I2C bus),
the second is the I2C address. A device is blindly assumed to be on
the given address, no probing is done.
-Fortunately, as a module writer, you just have to define the `normal'
-and/or `normal_range' parameters. The complete declaration could look
-like this:
+Fortunately, as a module writer, you just have to define the `normal_i2c'
+parameter. The complete declaration could look like this:
- /* Scan 0x20 to 0x2f, 0x37, and 0x40 to 0x4f */
- static unsigned short normal_i2c[] = { 0x37,I2C_CLIENT_END };
- static unsigned short normal_i2c_range[] = { 0x20, 0x2f, 0x40, 0x4f,
- I2C_CLIENT_END };
+ /* Scan 0x37, and 0x48 to 0x4f */
+ static unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+ 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
/* Magic definition of all other variables and things */
I2C_CLIENT_INSMOD;
-Note that you *have* to call the two defined variables `normal_i2c' and
-`normal_i2c_range', without any prefix!
+Note that you *have* to call the defined variable `normal_i2c',
+without any prefix!
Probing classes (sensors)
@@ -223,39 +209,17 @@ The following lists are used internally. They are all lists of integers.
normal_i2c: filled in by the module writer. Terminated by SENSORS_I2C_END.
A list of I2C addresses which should normally be examined.
- normal_i2c_range: filled in by the module writer. Terminated by
- SENSORS_I2C_END
- A list of pairs of I2C addresses, each pair being an inclusive range of
- addresses which should normally be examined.
normal_isa: filled in by the module writer. Terminated by SENSORS_ISA_END.
A list of ISA addresses which should normally be examined.
- normal_isa_range: filled in by the module writer. Terminated by
- SENSORS_ISA_END
- A list of triples. The first two elements are ISA addresses, being an
- range of addresses which should normally be examined. The third is the
- modulo parameter: only addresses which are 0 module this value relative
- to the first address of the range are actually considered.
probe: insmod parameter. Initialize this list with SENSORS_I2C_END values.
A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
the ISA bus, -1 for any I2C bus), the second is the address. These
addresses are also probed, as if they were in the 'normal' list.
- probe_range: insmod parameter. Initialize this list with SENSORS_I2C_END
- values.
- A list of triples. The first value is a bus number (SENSORS_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second and third are addresses.
- These form an inclusive range of addresses that are also probed, as
- if they were in the 'normal' list.
ignore: insmod parameter. Initialize this list with SENSORS_I2C_END values.
A list of pairs. The first value is a bus number (SENSORS_ISA_BUS for
the ISA bus, -1 for any I2C bus), the second is the I2C address. These
addresses are never probed. This parameter overrules 'normal' and
'probe', but not the 'force' lists.
- ignore_range: insmod parameter. Initialize this list with SENSORS_I2C_END
- values.
- A list of triples. The first value is a bus number (SENSORS_ISA_BUS for
- the ISA bus, -1 for any I2C bus), the second and third are addresses.
- These form an inclusive range of I2C addresses that are never probed.
- This parameter overrules 'normal' and 'probe', but not the 'force' lists.
Also used is a list of pointers to sensors_force_data structures:
force_data: insmod parameters. A list, ending with an element of which
@@ -269,16 +233,14 @@ Also used is a list of pointers to sensors_force_data structures:
So we have a generic insmod variabled `force', and chip-specific variables
`force_CHIPNAME'.
-Fortunately, as a module writer, you just have to define the `normal'
-and/or `normal_range' parameters, and define what chip names are used.
+Fortunately, as a module writer, you just have to define the `normal_i2c'
+and `normal_isa' parameters, and define what chip names are used.
The complete declaration could look like this:
- /* Scan i2c addresses 0x20 to 0x2f, 0x37, and 0x40 to 0x4f
- static unsigned short normal_i2c[] = {0x37,SENSORS_I2C_END};
- static unsigned short normal_i2c_range[] = {0x20,0x2f,0x40,0x4f,
- SENSORS_I2C_END};
+ /* Scan i2c addresses 0x37, and 0x48 to 0x4f */
+ static unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4b, 0x4c,
+ 0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
/* Scan ISA address 0x290 */
static unsigned int normal_isa[] = {0x0290,SENSORS_ISA_END};
- static unsigned int normal_isa_range[] = {SENSORS_ISA_END};
/* Define chips foo and bar, as well as all module parameters and things */
SENSORS_INSMOD_2(foo,bar);
diff --git a/Documentation/networking/generic-hdlc.txt b/Documentation/networking/generic-hdlc.txt
index 7d1dc6b884f3eeb70581820e9eeace45deb45d48..31bc8b759b755e03875426f3678e92e86a022b33 100644
--- a/Documentation/networking/generic-hdlc.txt
+++ b/Documentation/networking/generic-hdlc.txt
@@ -1,21 +1,21 @@
Generic HDLC layer
Krzysztof Halasa
-January, 2003
Generic HDLC layer currently supports:
-- Frame Relay (ANSI, CCITT and no LMI), with ARP support (no InARP).
- Normal (routed) and Ethernet-bridged (Ethernet device emulation)
- interfaces can share a single PVC.
-- raw HDLC - either IP (IPv4) interface or Ethernet device emulation.
-- Cisco HDLC,
-- PPP (uses syncppp.c),
-- X.25 (uses X.25 routines).
-
-There are hardware drivers for the following cards:
-- C101 by Moxa Technologies Co., Ltd.
-- RISCom/N2 by SDL Communications Inc.
-- and others, some not in the official kernel.
+1. Frame Relay (ANSI, CCITT, Cisco and no LMI).
+ - Normal (routed) and Ethernet-bridged (Ethernet device emulation)
+ interfaces can share a single PVC.
+ - ARP support (no InARP support in the kernel - there is an
+ experimental InARP user-space daemon available on:
+ http://www.kernel.org/pub/linux/utils/net/hdlc/).
+2. raw HDLC - either IP (IPv4) interface or Ethernet device emulation.
+3. Cisco HDLC.
+4. PPP (uses syncppp.c).
+5. X.25 (uses X.25 routines).
+
+Generic HDLC is a protocol driver only - it needs a low-level driver
+for your particular hardware.
Ethernet device emulation (using HDLC or Frame-Relay PVC) is compatible
with IEEE 802.1Q (VLANs) and 802.1D (Ethernet bridging).
@@ -24,7 +24,7 @@ with IEEE 802.1Q (VLANs) and 802.1D (Ethernet bridging).
Make sure the hdlc.o and the hardware driver are loaded. It should
create a number of "hdlc" (hdlc0 etc) network devices, one for each
WAN port. You'll need the "sethdlc" utility, get it from:
- http://hq.pm.waw.pl/hdlc/
+ http://www.kernel.org/pub/linux/utils/net/hdlc/
Compile sethdlc.c utility:
gcc -O2 -Wall -o sethdlc sethdlc.c
@@ -52,12 +52,12 @@ Setting interface:
* v35 | rs232 | x21 | t1 | e1 - sets physical interface for a given port
if the card has software-selectable interfaces
loopback - activate hardware loopback (for testing only)
-* clock ext - external clock (uses DTE RX and TX clock)
-* clock int - internal clock (provides clock signal on DCE clock output)
-* clock txint - TX internal, RX external (provides TX clock on DCE output)
-* clock txfromrx - TX clock derived from RX clock (TX clock on DCE output)
-* rate - sets clock rate in bps (not required for external clock or
- for txfromrx)
+* clock ext - both RX clock and TX clock external
+* clock int - both RX clock and TX clock internal
+* clock txint - RX clock external, TX clock internal
+* clock txfromrx - RX clock external, TX clock derived from RX clock
+* rate - sets clock rate in bps (for "int" or "txint" clock only)
+
Setting protocol:
@@ -79,7 +79,7 @@ Setting protocol:
* x25 - sets X.25 mode
* fr - Frame Relay mode
- lmi ansi / ccitt / none - LMI (link management) type
+ lmi ansi / ccitt / cisco / none - LMI (link management) type
dce - Frame Relay DCE (network) side LMI instead of default DTE (user).
It has nothing to do with clocks!
t391 - link integrity verification polling timer (in seconds) - user
@@ -119,13 +119,14 @@ or
-If you have a problem with N2 or C101 card, you can issue the "private"
-command to see port's packet descriptor rings (in kernel logs):
+If you have a problem with N2, C101 or PLX200SYN card, you can issue the
+"private" command to see port's packet descriptor rings (in kernel logs):
sethdlc hdlc0 private
-The hardware driver has to be build with CONFIG_HDLC_DEBUG_RINGS.
+The hardware driver has to be build with #define DEBUG_RINGS.
Attaching this info to bug reports would be helpful. Anyway, let me know
if you have problems using this.
-For patches and other info look at http://hq.pm.waw.pl/hdlc/
+For patches and other info look at:
+ .
diff --git a/Documentation/networking/multicast.txt b/Documentation/networking/multicast.txt
index 5049a64313d148c13a8704f4dde49e9aa24f58b7..b06c8c69266ff78f87d05940df5fd5526bedd5a6 100644
--- a/Documentation/networking/multicast.txt
+++ b/Documentation/networking/multicast.txt
@@ -47,7 +47,6 @@ ni52 <------------------ Buggy ------------------>
ni65 YES YES YES Software(#)
seeq NO NO NO N/A
sgiseek <------------------ Buggy ------------------>
-sk_g16 NO NO YES N/A
smc-ultra YES YES YES Hardware
sunlance YES YES YES Hardware
tulip YES YES YES Hardware
diff --git a/Documentation/networking/net-modules.txt b/Documentation/networking/net-modules.txt
index 3830a83513d20d9d752aa0c378d8157f48f74d15..0b27863f155c49bac2f810ec5ae9a09f6497e2e4 100644
--- a/Documentation/networking/net-modules.txt
+++ b/Documentation/networking/net-modules.txt
@@ -284,9 +284,6 @@ ppp.c:
seeq8005.c: *Not modularized*
(Probes ports: 0x300, 0x320, 0x340, 0x360)
-sk_g16.c: *Not modularized*
- (Probes ports: 0x100, 0x180, 0x208, 0x220m 0x288, 0x320, 0x328, 0x390)
-
skeleton.c: *Skeleton*
slhc.c:
diff --git a/Documentation/networking/vortex.txt b/Documentation/networking/vortex.txt
index fa12a9e4abdd2a4f23075c48ba8652c21cea27d1..80e1cb19609f552e958f7bd2259279e1a678e1cd 100644
--- a/Documentation/networking/vortex.txt
+++ b/Documentation/networking/vortex.txt
@@ -12,7 +12,7 @@ Don is no longer the prime maintainer of this version of the driver.
Please report problems to one or more of:
Andrew Morton
- Netdev mailing list
+ Netdev mailing list
Linux kernel mailing list
Please note the 'Reporting and Diagnosing Problems' section at the end
diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt
index 5d4ae9a39f1d5df7ffa644d39d0235a71b22c125..f987afe43e28e1327ee76ab4f3fdb617abfe0829 100644
--- a/Documentation/power/devices.txt
+++ b/Documentation/power/devices.txt
@@ -207,27 +207,6 @@ SYSTEM_SHUTDOWN, I do not understand this one too much. probably event
#READY_AFTER_RESUME
#
-Driver Detach Power Management
-
-The kernel now supports the ability to place a device in a low-power
-state when it is detached from its driver, which happens when its
-module is removed.
-
-Each device contains a 'detach_state' file in its sysfs directory
-which can be used to control this state. Reading from this file
-displays what the current detach state is set to. This is 0 (On) by
-default. A user may write a positive integer value to this file in the
-range of 1-4 inclusive.
-
-A value of 1-3 will indicate the device should be placed in that
-low-power state, which will cause ->suspend() to be called for that
-device. A value of 4 indicates that the device should be shutdown, so
-->shutdown() will be called for that device.
-
-The driver is responsible for reinitializing the device when the
-module is re-inserted during it's ->probe() (or equivalent) method.
-The driver core will not call any extra functions when binding the
-device to the driver.
pm_message_t meaning
diff --git a/Documentation/powerpc/hvcs.txt b/Documentation/powerpc/hvcs.txt
index c0a62e116e6e969e2e6e6cbe7b354a1e16a42fdc..dca75cbda6f8abc144afb9efcdea77b7b5f21eac 100644
--- a/Documentation/powerpc/hvcs.txt
+++ b/Documentation/powerpc/hvcs.txt
@@ -347,8 +347,8 @@ address that is created by firmware. An example vty-server sysfs entry
looks like the following:
Pow5:/sys/bus/vio/drivers/hvcs/30000004 # ls
- . current_vty devspec name partner_vtys
- .. detach_state index partner_clcs vterm_state
+ . current_vty devspec name partner_vtys
+ .. index partner_clcs vterm_state
Each entry is provided, by default with a "name" attribute. Reading the
"name" attribute will reveal the device type as shown in the following
diff --git a/Documentation/s390/CommonIO b/Documentation/s390/CommonIO
index a831d9ae5a5ef0ce6272fe08fe0d8e63e7c46ada..59d1166d41eeebc095528a84a24fa584ea0c953d 100644
--- a/Documentation/s390/CommonIO
+++ b/Documentation/s390/CommonIO
@@ -30,7 +30,7 @@ Command line parameters
device numbers (0xabcd or abcd, for 2.4 backward compatibility).
You can use the 'all' keyword to ignore all devices.
The '!' operator will cause the I/O-layer to _not_ ignore a device.
- The order on the command line is not important.
+ The command line is parsed from left to right.
For example,
cio_ignore=0.0.0023-0.0.0042,0.0.4711
@@ -72,13 +72,14 @@ Command line parameters
/proc/cio_ignore; "add , , ..." will ignore the
specified devices.
- Note: Already known devices cannot be ignored.
+ Note: While already known devices can be added to the list of devices to be
+ ignored, there will be no effect on then. However, if such a device
+ disappears and then reappeares, it will then be ignored.
- For example, if device 0.0.abcd is already known and all other devices
- 0.0.a000-0.0.afff are not known,
+ For example,
"echo add 0.0.a000-0.0.accc, 0.0.af00-0.0.afff > /proc/cio_ignore"
- will add 0.0.a000-0.0.abcc, 0.0.abce-0.0.accc and 0.0.af00-0.0.afff to the
- list of ignored devices and skip 0.0.abcd.
+ will add 0.0.a000-0.0.accc and 0.0.af00-0.0.afff to the list of ignored
+ devices.
The devices can be specified either by bus id (0.0.abcd) or, for 2.4 backward
compatibilty, by the device number in hexadecimal (0xabcd or abcd).
@@ -98,7 +99,8 @@ Command line parameters
- /proc/s390dbf/cio_trace/hex_ascii
Logs the calling of functions in the common I/O-layer and, if applicable,
- which subchannel they were called for.
+ which subchannel they were called for, as well as dumps of some data
+ structures (like irb in an error case).
The level of logging can be changed to be more or less verbose by piping to
/proc/s390dbf/cio_*/level a number between 0 and 6; see the documentation on
diff --git a/Documentation/scsi/ChangeLog.megaraid b/Documentation/scsi/ChangeLog.megaraid
index a9356c63b800f0a2a1ce8589fe6bf533e4e6acbc..5331d91432c76cb7d598165ee89db51236f27e75 100644
--- a/Documentation/scsi/ChangeLog.megaraid
+++ b/Documentation/scsi/ChangeLog.megaraid
@@ -1,3 +1,69 @@
+Release Date : Mon Mar 07 12:27:22 EST 2005 - Seokmann Ju
+Current Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
+Older Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
+
+1. Added IOCTL backward compatibility.
+ Convert megaraid_mm driver to new compat_ioctl entry points.
+ I don't have easy access to hardware, so only compile tested.
+ - Signed-off-by:Andi Kleen
+
+2. megaraid_mbox fix: wrong order of arguments in memset()
+ That, BTW, shows why cross-builds are useful-the only indication of
+ problem had been a new warning showing up in sparse output on alpha
+ build (number of exceeding 256 got truncated).
+ - Signed-off-by: Al Viro
+
+
+3. Convert pci_module_init to pci_register_driver
+ Convert from pci_module_init to pci_register_driver
+ (from:http://kerneljanitors.org/TODO)
+ - Signed-off-by: Domen Puncer
+
+4. Use the pre defined DMA mask constants from dma-mapping.h
+ Use the DMA_{64,32}BIT_MASK constants from dma-mapping.h when calling
+ pci_set_dma_mask() or pci_set_consistend_dma_mask(). See
+ http://marc.theaimsgroup.com/?t=108001993000001&r=1&w=2 for more
+ details.
+ Signed-off-by: Tobias Klauser
+ Signed-off-by: Domen Puncer
+
+5. Remove SSID checking for Dobson, Lindsay, and Verde based products.
+ Checking the SSVID/SSID for controllers which have Dobson, Lindsay,
+ and Verde is unnecessary because device ID has been assigned by LSI
+ and it is unique value. So, all controllers with these IOPs have to be
+ supported by the driver regardless SSVID/SSID.
+
+6. Date Thu, 27 Jan 2005 04:31:09 +0100
+ From Herbert Poetzl <>
+ Subject RFC: assert_spin_locked() for 2.6
+
+ Greetings!
+
+ overcautious programming will kill your kernel ;)
+ ever thought about checking a spin_lock or even
+ asserting that it must be held (maybe just for
+ spinlock debugging?) ...
+
+ there are several checks present in the kernel
+ where somebody does a variation on the following:
+
+ BUG_ON(!spin_is_locked(&some_lock));
+
+ so what's wrong about that? nothing, unless you
+ compile the code with CONFIG_DEBUG_SPINLOCK but
+ without CONFIG_SMP ... in which case the BUG()
+ will kill your kernel ...
+
+ maybe it's not advised to make such assertions,
+ but here is a solution which works for me ...
+ (compile tested for sh, x86_64 and x86, boot/run
+ tested for x86 only)
+
+ best,
+ Herbert
+
+ - Herbert Poetzl , Thu, 27 Jan 2005
+
Release Date : Thu Feb 03 12:27:22 EST 2005 - Seokmann Ju
Current Version : 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)
Older Version : 2.20.4.4 (scsi module), 2.20.2.4 (cmm module)
diff --git a/Documentation/scsi/scsi-changer.txt b/Documentation/scsi/scsi-changer.txt
new file mode 100644
index 0000000000000000000000000000000000000000..c132687b017a64ad77f5f8f2709705f32d36af05
--- /dev/null
+++ b/Documentation/scsi/scsi-changer.txt
@@ -0,0 +1,180 @@
+
+README for the SCSI media changer driver
+========================================
+
+This is a driver for SCSI Medium Changer devices, which are listed
+with "Type: Medium Changer" in /proc/scsi/scsi.
+
+This is for *real* Jukeboxes. It is *not* supported to work with
+common small CD-ROM changers, neither one-lun-per-slot SCSI changers
+nor IDE drives.
+
+Userland tools available from here:
+ http://linux.bytesex.org/misc/changer.html
+
+
+General Information
+-------------------
+
+First some words about how changers work: A changer has 2 (possibly
+more) SCSI ID's. One for the changer device which controls the robot,
+and one for the device which actually reads and writes the data. The
+later may be anything, a MOD, a CD-ROM, a tape or whatever. For the
+changer device this is a "don't care", he *only* shuffles around the
+media, nothing else.
+
+
+The SCSI changer model is complex, compared to - for example - IDE-CD
+changers. But it allows to handle nearly all possible cases. It knows
+4 different types of changer elements:
+
+ media transport - this one shuffles around the media, i.e. the
+ transport arm. Also known as "picker".
+ storage - a slot which can hold a media.
+ import/export - the same as above, but is accessable from outside,
+ i.e. there the operator (you !) can use this to
+ fill in and remove media from the changer.
+ Sometimes named "mailslot".
+ data transfer - this is the device which reads/writes, i.e. the
+ CD-ROM / Tape / whatever drive.
+
+None of these is limited to one: A huge Jukebox could have slots for
+123 CD-ROM's, 5 CD-ROM readers (and therefore 6 SCSI ID's: the changer
+and each CD-ROM) and 2 transport arms. No problem to handle.
+
+
+How it is implemented
+---------------------
+
+I implemented the driver as character device driver with a NetBSD-like
+ioctl interface. Just grabbed NetBSD's header file and one of the
+other linux SCSI device drivers as starting point. The interface
+should be source code compatible with NetBSD. So if there is any
+software (anybody knows ???) which supports a BSDish changer driver,
+it should work with this driver too.
+
+Over time a few more ioctls where added, volume tag support for example
+wasn't covered by the NetBSD ioctl API.
+
+
+Current State
+-------------
+
+Support for more than one transport arm is not implemented yet (and
+nobody asked for it so far...).
+
+I test and use the driver myself with a 35 slot cdrom jukebox from
+Grundig. I got some reports telling it works ok with tape autoloaders
+(Exabyte, HP and DEC). Some People use this driver with amanda. It
+works fine with small (11 slots) and a huge (4 MOs, 88 slots)
+magneto-optical Jukebox. Probably with lots of other changers too, most
+(but not all :-) people mail me only if it does *not* work...
+
+I don't have any device lists, neither black-list nor white-list. Thus
+it is quite useless to ask me whenever a specific device is supported or
+not. In theory every changer device which supports the SCSI-2 media
+changer command set should work out-of-the-box with this driver. If it
+doesn't, it is a bug. Either within the driver or within the firmware
+of the changer device.
+
+
+Using it
+--------
+
+This is a character device with major number is 86, so use
+"mknod /dev/sch0 c 86 0" to create the special file for the driver.
+
+If the module finds the changer, it prints some messages about the
+device [ try "dmesg" if you don't see anything ] and should show up in
+/proc/devices. If not.... some changers use ID ? / LUN 0 for the
+device and ID ? / LUN 1 for the robot mechanism. But Linux does *not*
+look for LUN's other than 0 as default, becauce there are to many
+broken devices. So you can try:
+
+ 1) echo "scsi add-single-device 0 0 ID 1" > /proc/scsi/scsi
+ (replace ID with the SCSI-ID of the device)
+ 2) boot the kernel with "max_scsi_luns=1" on the command line
+ (append="max_scsi_luns=1" in lilo.conf should do the trick)
+
+
+Trouble?
+--------
+
+If you insmod the driver with "insmod debug=1", it will be verbose and
+prints a lot of stuff to the syslog. Compiling the kernel with
+CONFIG_SCSI_CONSTANTS=y improves the quality of the error messages alot
+because the kernel will translate the error codes into human-readable
+strings then.
+
+You can display these messages with the dmesg command (or check the
+logfiles). If you email me some question becauce of a problem with the
+driver, please include these messages.
+
+
+Insmod options
+--------------
+
+debug=0/1
+ Enable debug messages (see above, default: 0).
+
+verbose=0/1
+ Be verbose (default: 1).
+
+init=0/1
+ Send INITIALIZE ELEMENT STATUS command to the changer
+ at insmod time (default: 1).
+
+timeout_init=
+ timeout for the INITIALIZE ELEMENT STATUS command
+ (default: 3600).
+
+timeout_move=
+ timeout for all other commands (default: 120).
+
+dt_id=,,...
+dt_lun=,,...
+ These two allow to specify the SCSI ID and LUN for the data
+ transfer elements. You likely don't need this as the jukebox
+ should provide this information. But some devices don't ...
+
+vendor_firsts=
+vendor_counts=
+vendor_labels=
+ These insmod options can be used to tell the driver that there
+ are some vendor-specific element types. Grundig for example
+ does this. Some jukeboxes have a printer to label fresh burned
+ CDs, which is addressed as element 0xc000 (type 5). To tell the
+ driver about this vendor-specific element, use this:
+ $ insmod ch \
+ vendor_firsts=0xc000 \
+ vendor_counts=1 \
+ vendor_labels=printer
+ All three insmod options accept up to four comma-separated
+ values, this way you can configure the element types 5-8.
+ You likely need the SCSI specs for the device in question to
+ find the correct values as they are not covered by the SCSI-2
+ standard.
+
+
+Credits
+-------
+
+I wrote this driver using the famous mailing-patches-around-the-world
+method. With (more or less) help from:
+
+ Daniel Moehwald
+ Dane Jasper
+ R. Scott Bailey
+ Jonathan Corbet
+
+Special thanks go to
+ Martin Kuehne
+for a old, second-hand (but full functional) cdrom jukebox which I use
+to develop/test driver and tools now.
+
+Have fun,
+
+ Gerd
+
+--
+Gerd Knorr
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index e41703d7d24d3f0579acccdc0b28a56da2621ff1..da176c95d0fb62618ff5c3684f5768a935f9dd0f 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -936,8 +936,7 @@ Details:
*
* Returns SUCCESS if command aborted else FAILED
*
- * Locks: struct Scsi_Host::host_lock held (with irqsave) on entry
- * and assumed to be held on return.
+ * Locks: None held
*
* Calling context: kernel thread
*
@@ -955,8 +954,7 @@ Details:
*
* Returns SUCCESS if command aborted else FAILED
*
- * Locks: struct Scsi_Host::host_lock held (with irqsave) on entry
- * and assumed to be held on return.
+ * Locks: None held
*
* Calling context: kernel thread
*
@@ -974,8 +972,7 @@ Details:
*
* Returns SUCCESS if command aborted else FAILED
*
- * Locks: struct Scsi_Host::host_lock held (with irqsave) on entry
- * and assumed to be held on return.
+ * Locks: None held
*
* Calling context: kernel thread
*
@@ -993,8 +990,7 @@ Details:
*
* Returns SUCCESS if command aborted else FAILED
*
- * Locks: struct Scsi_Host::host_lock held (with irqsave) on entry
- * and assumed to be held on return.
+ * Locks: None held
*
* Calling context: kernel thread
*
diff --git a/Documentation/sgi-ioc4.txt b/Documentation/sgi-ioc4.txt
new file mode 100644
index 0000000000000000000000000000000000000000..876c96ae38dba1402e79c11a10ff1c64eb5741fd
--- /dev/null
+++ b/Documentation/sgi-ioc4.txt
@@ -0,0 +1,45 @@
+The SGI IOC4 PCI device is a bit of a strange beast, so some notes on
+it are in order.
+
+First, even though the IOC4 performs multiple functions, such as an
+IDE controller, a serial controller, a PS/2 keyboard/mouse controller,
+and an external interrupt mechanism, it's not implemented as a
+multifunction device. The consequence of this from a software
+standpoint is that all these functions share a single IRQ, and
+they can't all register to own the same PCI device ID. To make
+matters a bit worse, some of the register blocks (and even registers
+themselves) present in IOC4 are mixed-purpose between these several
+functions, meaning that there's no clear "owning" device driver.
+
+The solution is to organize the IOC4 driver into several independent
+drivers, "ioc4", "sgiioc4", and "ioc4_serial". Note that there is no
+PS/2 controller driver as this functionality has never been wired up
+on a shipping IO card.
+
+ioc4
+====
+This is the core (or shim) driver for IOC4. It is responsible for
+initializing the basic functionality of the chip, and allocating
+the PCI resources that are shared between the IOC4 functions.
+
+This driver also provides registration functions that the other
+IOC4 drivers can call to make their presence known. Each driver
+needs to provide a probe and remove function, which are invoked
+by the core driver at appropriate times. The interface of these
+IOC4 function probe and remove operations isn't precisely the same
+as PCI device probe and remove operations, but is logically the
+same operation.
+
+sgiioc4
+=======
+This is the IDE driver for IOC4. Its name isn't very descriptive
+simply for historical reasons (it used to be the only IOC4 driver
+component). There's not much to say about it other than it hooks
+up to the ioc4 driver via the appropriate registration, probe, and
+remove functions.
+
+ioc4_serial
+===========
+This is the serial driver for IOC4. There's not much to say about it
+other than it hooks up to the ioc4 driver via the appropriate registration,
+probe, and remove functions.
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 71ef0498d5e03e3e334c3d9bdefdd1c502611291..104a994b8289fc056ac6685f8bd7720ce35289c5 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -615,9 +615,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
Module snd-hda-intel
--------------------
- Module for Intel HD Audio (ICH6, ICH6M, ICH7)
+ Module for Intel HD Audio (ICH6, ICH6M, ICH7), ATI SB450,
+ VIA VT8251/VT8237A
model - force the model name
+ position_fix - Fix DMA pointer (0 = FIFO size, 1 = none, 2 = POSBUF)
Module supports up to 8 cards.
@@ -635,6 +637,10 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
5stack 5-jack in back, 2-jack in front
5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
w810 3-jack
+ z71v 3-jack (HP shared SPDIF)
+ asus 3-jack
+ uniwill 3-jack
+ F1734 2-jack
CMI9880
minimal 3-jack in back
@@ -642,6 +648,15 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
full 6-jack in back, 2-jack in front
full_dig 6-jack in back, 2-jack in front, SPDIF I/O
allout 5-jack in back, 2-jack in front, SPDIF out
+ auto auto-config reading BIOS (default)
+
+ Note 2: If you get click noises on output, try the module option
+ position_fix=1 or 2. position_fix=1 will use the SD_LPIB
+ register value without FIFO size correction as the current
+ DMA pointer. position_fix=2 will make the driver to use
+ the position buffer instead of reading SD_LPIB register.
+ (Usually SD_LPLIB register is more accurate than the
+ position buffer.)
Module snd-hdsp
---------------
@@ -660,7 +675,19 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
module did formerly. It will allocate the buffers in advance
when any HDSP cards are found. To make the buffer
allocation sure, load snd-page-alloc module in the early
- stage of boot sequence.
+ stage of boot sequence. See "Early Buffer Allocation"
+ section.
+
+ Module snd-hdspm
+ ----------------
+
+ Module for RME HDSP MADI board.
+
+ precise_ptr - Enable precise pointer, or disable.
+ line_outs_monitor - Send playback streams to analog outs by default.
+ enable_monitor - Enable Analog Out on Channel 63/64 by default.
+
+ See hdspm.txt for details.
Module snd-ice1712
------------------
@@ -677,15 +704,19 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* TerraTec EWS 88D
* TerraTec EWX 24/96
* TerraTec DMX 6Fire
+ * TerraTec Phase 88
* Hoontech SoundTrack DSP 24
* Hoontech SoundTrack DSP 24 Value
* Hoontech SoundTrack DSP 24 Media 7.1
+ * Event Electronics, EZ8
* Digigram VX442
+ * Lionstracs, Mediastaton
model - Use the given board model, one of the following:
delta1010, dio2496, delta66, delta44, audiophile, delta410,
delta1010lt, vx442, ewx2496, ews88mt, ews88mt_new, ews88d,
- dmx6fire, dsp24, dsp24_value, dsp24_71, ez8
+ dmx6fire, dsp24, dsp24_value, dsp24_71, ez8,
+ phase88, mediastation
omni - Omni I/O support for MidiMan M-Audio Delta44/66
cs8427_timeout - reset timeout for the CS8427 chip (S/PDIF transciever)
in msec resolution, default value is 500 (0.5 sec)
@@ -694,20 +725,46 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
is not used with all Envy24 based cards (for example in the MidiMan Delta
serie).
+ Note: The supported board is detected by reading EEPROM or PCI
+ SSID (if EEPROM isn't available). You can override the
+ model by passing "model" module option in case that the
+ driver isn't configured properly or you want to try another
+ type for testing.
+
Module snd-ice1724
------------------
- Module for Envy24HT (VT/ICE1724) based PCI sound cards.
+ Module for Envy24HT (VT/ICE1724), Envy24PT (VT1720) based PCI sound cards.
* MidiMan M Audio Revolution 7.1
* AMP Ltd AUDIO2000
- * TerraTec Aureon Sky-5.1, Space-7.1
+ * TerraTec Aureon 5.1 Sky
+ * TerraTec Aureon 7.1 Space
+ * TerraTec Aureon 7.1 Universe
+ * TerraTec Phase 22
+ * TerraTec Phase 28
+ * AudioTrak Prodigy 7.1
+ * AudioTrak Prodigy 192
+ * Pontis MS300
+ * Albatron K8X800 Pro II
+ * Chaintech ZNF3-150
+ * Chaintech ZNF3-250
+ * Chaintech 9CJS
+ * Chaintech AV-710
+ * Shuttle SN25P
model - Use the given board model, one of the following:
- revo71, amp2000, prodigy71, aureon51, aureon71,
- k8x800
+ revo71, amp2000, prodigy71, prodigy192, aureon51,
+ aureon71, universe, k8x800, phase22, phase28, ms300,
+ av710
Module supports up to 8 cards and autoprobe.
+ Note: The supported board is detected by reading EEPROM or PCI
+ SSID (if EEPROM isn't available). You can override the
+ model by passing "model" module option in case that the
+ driver isn't configured properly or you want to try another
+ type for testing.
+
Module snd-intel8x0
-------------------
@@ -1026,7 +1083,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
module did formerly. It will allocate the buffers in advance
when any RME9652 cards are found. To make the buffer
allocation sure, load snd-page-alloc module in the early
- stage of boot sequence.
+ stage of boot sequence. See "Early Buffer Allocation"
+ section.
Module snd-sa11xx-uda1341 (on arm only)
---------------------------------------
@@ -1211,16 +1269,18 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
------------------
Module for AC'97 motherboards based on VIA 82C686A/686B, 8233,
- 8233A, 8233C, 8235 (south) bridge.
+ 8233A, 8233C, 8235, 8237 (south) bridge.
mpu_port - 0x300,0x310,0x320,0x330, otherwise obtain BIOS setup
[VIA686A/686B only]
joystick - Enable joystick (default off) [VIA686A/686B only]
ac97_clock - AC'97 codec clock base (default 48000Hz)
dxs_support - support DXS channels,
- 0 = auto (defalut), 1 = enable, 2 = disable,
- 3 = 48k only, 4 = no VRA
- [VIA8233/C,8235 only]
+ 0 = auto (default), 1 = enable, 2 = disable,
+ 3 = 48k only, 4 = no VRA, 5 = enable any sample
+ rate and different sample rates on different
+ channels
+ [VIA8233/C, 8235, 8237 only]
ac97_quirk - AC'97 workaround for strange hardware
See the description of intel8x0 module for details.
@@ -1232,18 +1292,23 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
default value 1.4. Then the interrupt number will be
assigned under 15. You might also upgrade your BIOS.
- Note: VIA8233/5 (not VIA8233A) can support DXS (direct sound)
+ Note: VIA8233/5/7 (not VIA8233A) can support DXS (direct sound)
channels as the first PCM. On these channels, up to 4
- streams can be played at the same time.
+ streams can be played at the same time, and the controller
+ can perform sample rate conversion with separate rates for
+ each channel.
As default (dxs_support = 0), 48k fixed rate is chosen
except for the known devices since the output is often
noisy except for 48k on some mother boards due to the
bug of BIOS.
- Please try once dxs_support=1 and if it works on other
+ Please try once dxs_support=5 and if it works on other
sample rates (e.g. 44.1kHz of mp3 playback), please let us
know the PCI subsystem vendor/device id's (output of
"lspci -nv").
- If it doesn't work, try dxs_support=4. If it still doesn't
+ If dxs_support=5 does not work, try dxs_support=4; if it
+ doesn't work too, try dxs_support=1. (dxs_support=1 is
+ usually for old motherboards. The correct implementated
+ board should work with 4 or 5.) If it still doesn't
work and the default setting is ok, dxs_support=3 is the
right choice. If the default setting doesn't work at all,
try dxs_support=2 to disable the DXS channels.
@@ -1497,6 +1562,36 @@ Proc interfaces (/proc/asound)
echo "rvplayer 0 0 block" > /proc/asound/card0/pcm0p/oss
+Early Buffer Allocation
+=======================
+
+Some drivers (e.g. hdsp) require the large contiguous buffers, and
+sometimes it's too late to find such spaces when the driver module is
+actually loaded due to memory fragmentation. You can pre-allocate the
+PCM buffers by loading snd-page-alloc module and write commands to its
+proc file in prior, for example, in the early boot stage like
+/etc/init.d/*.local scripts.
+
+Reading the proc file /proc/drivers/snd-page-alloc shows the current
+usage of page allocation. In writing, you can send the following
+commands to the snd-page-alloc driver:
+
+ - add VENDOR DEVICE MASK SIZE BUFFERS
+
+ VENDOR and DEVICE are PCI vendor and device IDs. They take
+ integer numbers (0x prefix is needed for the hex).
+ MASK is the PCI DMA mask. Pass 0 if not restricted.
+ SIZE is the size of each buffer to allocate. You can pass
+ k and m suffix for KB and MB. The max number is 16MB.
+ BUFFERS is the number of buffers to allocate. It must be greater
+ than 0. The max number is 4.
+
+ - erase
+
+ This will erase the all pre-allocated buffers which are not in
+ use.
+
+
Links
=====
diff --git a/Documentation/sound/alsa/CMIPCI.txt b/Documentation/sound/alsa/CMIPCI.txt
index 4a7df771b806c7f7728d4b72292b62478a3bcd37..1872e24442a47537d7b0497ab2ea17067dc64f16 100644
--- a/Documentation/sound/alsa/CMIPCI.txt
+++ b/Documentation/sound/alsa/CMIPCI.txt
@@ -89,19 +89,22 @@ and use the interleaved 4 channel data.
There are some control switchs affecting to the speaker connections:
-"Line-In As Rear" - As mentioned above, the line-in jack is used
- for the rear (3th and 4th channels) output.
-"Line-In As Bass" - The line-in jack is used for the bass (5th
- and 6th channels) output.
-"Mic As Center/LFE" - The mic jack is used for the bass output.
- If this switch is on, you cannot use a microphone as a capture
- source, of course.
-
+"Line-In Mode" - an enum control to change the behavior of line-in
+ jack. Either "Line-In", "Rear Output" or "Bass Output" can
+ be selected. The last item is available only with model 039
+ or newer.
+ When "Rear Output" is chosen, the surround channels 3 and 4
+ are output to line-in jack.
+"Mic-In Mode" - an enum control to change the behavior of mic-in
+ jack. Either "Mic-In" or "Center/LFE Output" can be
+ selected.
+ When "Center/LFE Output" is chosen, the center and bass
+ channels (channels 5 and 6) are output to mic-in jack.
Digital I/O
-----------
-The CM8x38 provides the excellent SPDIF capability with very chip
+The CM8x38 provides the excellent SPDIF capability with very cheap
price (yes, that's the reason I bought the card :)
The SPDIF playback and capture are done via the third PCM device
@@ -122,8 +125,9 @@ respectively, so you cannot playback both analog and digital streams
simultaneously.
To enable SPDIF output, you need to turn on "IEC958 Output Switch"
-control via mixer or alsactl. Then you'll see the red light on from
-the card so you know that's working obviously :)
+control via mixer or alsactl ("IEC958" is the official name of
+so-called S/PDIF). Then you'll see the red light on from the card so
+you know that's working obviously :)
The SPDIF input is always enabled, so you can hear SPDIF input data
from line-out with "IEC958 In Monitor" switch at any time (see
below).
@@ -205,9 +209,10 @@ In addition to the standard SB mixer, CM8x38 provides more functions.
MIDI CONTROLLER
---------------
-The MPU401-UART interface is enabled as default only for the first
-(CMIPCI) card. You need to set module option "midi_port" properly
-for the 2nd (CMIPCI) card.
+The MPU401-UART interface is disabled as default. You need to set
+module option "mpu_port" with a valid I/O port address to enable the
+MIDI support. The valid I/O ports are 0x300, 0x310, 0x320 and 0x330.
+Choose the value which doesn't conflict with other cards.
There is _no_ hardware wavetable function on this chip (except for
OPL3 synth below).
@@ -229,9 +234,11 @@ I don't know why..
Joystick and Modem
------------------
-The joystick and modem should be available by enabling the control
-switch "Joystick" and "Modem" respectively. But I myself have never
-tested them yet.
+The legacy joystick is supported. To enable the joystick support, pass
+joystick_port=1 module option. The value 1 means the auto-detection.
+If the auto-detection fails, try to pass the exact I/O address.
+
+The modem is enabled dynamically via a card control switch "Modem".
Debugging Information
diff --git a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
index e789475304b6e03b8b8e5c60c72fd8f445f65a5b..db0b7d2dc477cfc01aa0bc10282c850e0c10ae9f 100644
--- a/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
+++ b/Documentation/sound/alsa/DocBook/writing-an-alsa-driver.tmpl
@@ -371,7 +371,7 @@
create probe() callback.
create remove() callback.
create pci_driver table which contains the three pointers above.
- create init() function just calling pci_module_init() to register the pci_driver table defined above.
+ create init() function just calling pci_register_driver() to register the pci_driver table defined above.
create exit() function to call pci_unregister_driver() function.
@@ -1198,7 +1198,7 @@
/* initialization of the module */
static int __init alsa_card_mychip_init(void)
{
- return pci_module_init(&driver);
+ return pci_register_driver(&driver);
}
/* clean up the module */
@@ -1654,7 +1654,7 @@
+
+
+ Here as a first value the channel-index is taken to get/set the
+ corresponding mixer channel, where 0-63 are the input to output
+ fader and 64-127 the playback to outputs fader. Value 0
+ is channel muted 0 and 32768 an amplification of 1.
+
+ Chn 1-64
+
+ fast mixer for the ALSA-mixer utils. The diagonal of the
+ mixer-matrix is implemented from playback to output.
+
+
+ Line Out
+
+ Name -- "Line Out"
+
+ Access -- Read Write
+
+ Values -- 0 1
+
+ Switching on and off the analog out, which has nothing to do
+ with mixing or routing. the analog outs reflects channel 63,64.
+
+
+--- information (only read access):
+
+ Sample Rate
+
+ Name -- "System Sample Rate"
+
+ Access -- Read-only
+
+ getting the sample rate.
+
+
+ External Rate measured
+
+ Name -- "External Rate"
+
+ Access -- Read only
+
+
+ Should be "Autosync Rate", but Name used is
+ ALSA-Scheme. External Sample frequency liked used on Autosync is
+ reported.
+
+
+ MADI Sync Status
+
+ Name -- "MADI Sync Lock Status"
+
+ Access -- Read
+
+ Values -- 0,1,2
+
+ MADI-Input is 0=Unlocked, 1=Locked, or 2=Synced.
+
+
+ Word Clock Sync Status
+
+ Name -- "Word Clock Lock Status"
+
+ Access -- Read
+
+ Values -- 0,1,2
+
+ Word Clock Input is 0=Unlocked, 1=Locked, or 2=Synced.
+
+ AutoSync
+
+ Name -- "AutoSync Reference"
+
+ Access -- Read
+
+ Values -- "WordClock", "MADI", "None"
+
+ Sync-Reference is either "WordClock", "MADI" or none.
+
+ RX 64ch --- noch nicht implementiert
+
+ MADI-Receiver is in 64 channel mode oder 56 channel mode.
+
+
+ AB_inp --- not tested
+
+ Used input for Auto-Input.
+
+
+ actual Buffer Position --- not implemented
+
+ !!! this is a ALSA internal function, so no control is used !!!
+
+
+
+Calling Parameter:
+
+ index int array (min = 1, max = 8),
+ "Index value for RME HDSPM interface." card-index within ALSA
+
+ note: ALSA-standard
+
+ id string array (min = 1, max = 8),
+ "ID string for RME HDSPM interface."
+
+ note: ALSA-standard
+
+ enable int array (min = 1, max = 8),
+ "Enable/disable specific HDSPM sound-cards."
+
+ note: ALSA-standard
+
+ precise_ptr int array (min = 1, max = 8),
+ "Enable precise pointer, or disable."
+
+ note: Use only when the application supports this (which is a special case).
+
+ line_outs_monitor int array (min = 1, max = 8),
+ "Send playback streams to analog outs by default."
+
+
+ note: each playback channel is mixed to the same numbered output
+ channel (routed). This is against the ALSA-convention, where all
+ channels have to be muted on after loading the driver, but was
+ used before on other cards, so i historically use it again)
+
+
+
+ enable_monitor int array (min = 1, max = 8),
+ "Enable Analog Out on Channel 63/64 by default."
+
+ note: here the analog output is enabled (but not routed).
\ No newline at end of file
diff --git a/Documentation/w1/w1.generic b/Documentation/w1/w1.generic
index eace3046a8582b23beb0928fe28d698b9bf1194a..f937fbe1cacbc86ceb808a1d4ab1fe39f793a104 100644
--- a/Documentation/w1/w1.generic
+++ b/Documentation/w1/w1.generic
@@ -1,19 +1,92 @@
-Any w1 device must be connected to w1 bus master device - for example
-ds9490 usb device or w1-over-GPIO or RS232 converter.
-Driver for w1 bus master must provide several functions(you can find
-them in struct w1_bus_master definition in w1.h) which then will be
-called by w1 core to send various commands over w1 bus(by default it is
-reset and search commands). When some device is found on the bus, w1 core
-checks if driver for it's family is loaded.
-If driver is loaded w1 core creates new w1_slave object and registers it
-in the system(creates some generic sysfs files(struct w1_family_ops in
-w1_family.h), notifies any registered listener and so on...).
-It is device driver's business to provide any communication method
-upstream.
-For example w1_therm driver(ds18?20 thermal sensor family driver)
-provides temperature reading function which is bound to ->rbin() method
-of the above w1_family_ops structure.
-w1_smem - driver for simple 64bit memory cell provides ID reading
-method.
+The 1-wire (w1) subsystem
+------------------------------------------------------------------
+The 1-wire bus is a simple master-slave bus that communicates via a single
+signal wire (plus ground, so two wires).
+
+Devices communicate on the bus by pulling the signal to ground via an open
+drain output and by sampling the logic level of the signal line.
+
+The w1 subsystem provides the framework for managing w1 masters and
+communication with slaves.
+
+All w1 slave devices must be connected to a w1 bus master device.
+
+Example w1 master devices:
+ DS9490 usb device
+ W1-over-GPIO
+ DS2482 (i2c to w1 bridge)
+ Emulated devices, such as a RS232 converter, parallel port adapter, etc
+
+
+What does the w1 subsystem do?
+------------------------------------------------------------------
+When a w1 master driver registers with the w1 subsystem, the following occurs:
+
+ - sysfs entries for that w1 master are created
+ - the w1 bus is periodically searched for new slave devices
+
+When a device is found on the bus, w1 core checks if driver for it's family is
+loaded. If so, the family driver is attached to the slave.
+If there is no driver for the family, a simple sysfs entry is created
+for the slave device.
+
+
+W1 device families
+------------------------------------------------------------------
+Slave devices are handled by a driver written for a family of w1 devices.
+
+A family driver populates a struct w1_family_ops (see w1_family.h) and
+registers with the w1 subsystem.
+
+Current family drivers:
+w1_therm - (ds18?20 thermal sensor family driver)
+ provides temperature reading function which is bound to ->rbin() method
+ of the above w1_family_ops structure.
+
+w1_smem - driver for simple 64bit memory cell provides ID reading method.
You can call above methods by reading appropriate sysfs files.
+
+
+What does a w1 master driver need to implement?
+------------------------------------------------------------------
+
+The driver for w1 bus master must provide at minimum two functions.
+
+Emulated devices must provide the ability to set the output signal level
+(write_bit) and sample the signal level (read_bit).
+
+Devices that support the 1-wire natively must provide the ability to write and
+sample a bit (touch_bit) and reset the bus (reset_bus).
+
+Most hardware provides higher-level functions that offload w1 handling.
+See struct w1_bus_master definition in w1.h for details.
+
+
+w1 master sysfs interface
+------------------------------------------------------------------
+ - a directory for a found device. The format is family-serial
+bus - (standard) symlink to the w1 bus
+driver - (standard) symlink to the w1 driver
+w1_master_attempts - the number of times a search was attempted
+w1_master_max_slave_count
+ - the maximum slaves that may be attached to a master
+w1_master_name - the name of the device (w1_bus_masterX)
+w1_master_search - the number of searches left to do, -1=continual (default)
+w1_master_slave_count
+ - the number of slaves found
+w1_master_slaves - the names of the slaves, one per line
+w1_master_timeout - the delay in seconds between searches
+
+If you have a w1 bus that never changes (you don't add or remove devices),
+you can set w1_master_search to a positive value to disable searches.
+
+
+w1 slave sysfs interface
+------------------------------------------------------------------
+bus - (standard) symlink to the w1 bus
+driver - (standard) symlink to the w1 driver
+name - the device name, usually the same as the directory name
+w1_slave - (optional) a binary file whose meaning depends on the
+ family driver
+
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index 44b6eea60ecec18a090a426a3c5cbef7920b5e82..b9e6be00cadfbc1f2e767076c467ccb6f6ad28e6 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -25,6 +25,9 @@ APICs
noapictimer Don't set up the APIC timer
+ no_timer_check Don't check the IO-APIC timer. This can work around
+ problems with incorrect timer initialization on some boards.
+
Early Console
syntax: earlyprintk=vga
diff --git a/MAINTAINERS b/MAINTAINERS
index 5b8483334de1eb0e30b83dc825f8867294bc4e0c..4d44824884efc432892ddffbc48216f790e13a62 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -73,7 +73,7 @@ S: Status, one of the following:
3C359 NETWORK DRIVER
P: Mike Phillips
M: mikep@linuxtr.net
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
L: linux-tr@linuxtr.net
W: http://www.linuxtr.net
S: Maintained
@@ -81,13 +81,13 @@ S: Maintained
3C505 NETWORK DRIVER
P: Philip Blundell
M: philb@gnu.org
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
3CR990 NETWORK DRIVER
P: David Dillow
M: dave@thedillows.org
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
3W-XXXX ATA-RAID CONTROLLER DRIVER
@@ -130,7 +130,7 @@ S: Maintained
8169 10/100/1000 GIGABIT ETHERNET DRIVER
P: Francois Romieu
M: romieu@fr.zoreil.com
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
@@ -143,7 +143,7 @@ S: Maintained
8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
P: Paul Gortmaker
M: p_gortmaker@yahoo.com
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
A2232 SERIAL BOARD DRIVER
@@ -194,7 +194,7 @@ S: Maintained
ADM1025 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
S: Maintained
ADT746X FAN DRIVER
@@ -239,6 +239,12 @@ L: linux-usb-devel@lists.sourceforge.net
W: http://www.linux-usb.org/SpeedTouch/
S: Maintained
+ALI1563 I2C DRIVER
+P: Rudolf Marek
+M: r.marek@sh.cvut.cz
+L: lm-sensors@lm-sensors.org
+S: Maintained
+
ALPHA PORT
P: Richard Henderson
M: rth@twiddle.net
@@ -259,6 +265,11 @@ P: Arnaldo Carvalho de Melo
M: acme@conectiva.com.br
S: Maintained
+ARC FRAMEBUFFER DRIVER
+P: Jaya Kumar
+M: jayalk@intworks.biz
+S: Maintained
+
ARM26 ARCHITECTURE
P: Ian Molton
M: spyro@f2s.com
@@ -326,7 +337,7 @@ S: Maintained
ARPD SUPPORT
P: Jonathan Layes
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
ASUS ACPI EXTRAS DRIVER
@@ -700,7 +711,7 @@ S: Orphaned
DIGI RIGHTSWITCH NETWORK DRIVER
P: Rick Richardson
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
W: http://www.digi.com
S: Orphaned
@@ -730,6 +741,11 @@ M: tori@unhappy.mine.nu
L: linux-kernel@vger.kernel.org
S: Maintained
+DOCBOOK FOR DOCUMENTATION
+P: Martin Waitz
+M: tali@admingilde.org
+S: Maintained
+
DOUBLETALK DRIVER
P: James R. Van Zandt
M: jrv@vanzandt.mv.com
@@ -806,7 +822,7 @@ S: Maintained
ETHEREXPRESS-16 NETWORK DRIVER
P: Philip Blundell
M: philb@gnu.org
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
ETHERNET BRIDGE
@@ -869,7 +885,7 @@ S: Maintained
FRAME RELAY DLCI/FRAD (Sangoma drivers too)
P: Mike McLagan
M: mike.mclagan@linux.org
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
FREEVXFS FILESYSTEM
@@ -986,7 +1002,7 @@ P: Greg Kroah-Hartman
M: greg@kroah.com
P: Jean Delvare
M: khali@linux-fr.org
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
W: http://www.lm-sensors.nu/
S: Maintained
@@ -1023,8 +1039,8 @@ W: http://www.ia64-linux.org/
S: Maintained
SN-IA64 (Itanium) SUB-PLATFORM
-P: Jesse Barnes
-M: jbarnes@sgi.com
+P: Greg Edwards
+M: edwardsg@sgi.com
L: linux-altix@sgi.com
L: linux-ia64@vger.kernel.org
W: http://www.sgi.com/altix
@@ -1209,7 +1225,7 @@ S: Maintained
IPX NETWORK LAYER
P: Arnaldo Carvalho de Melo
M: acme@conectiva.com.br
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
IRDA SUBSYSTEM
@@ -1414,13 +1430,13 @@ S: Supported
LM83 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
S: Maintained
LM90 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
S: Maintained
LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP Dynamic Disks)
@@ -1476,7 +1492,7 @@ MARVELL MV64340 ETHERNET DRIVER
P: Manish Lachwani
M: Manish_Lachwani@pmc-sierra.com
L: linux-mips@linux-mips.org
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Supported
MATROX FRAMEBUFFER DRIVER
@@ -1586,13 +1602,13 @@ P: Andrew Morton
M: akpm@osdl.org
P: Jeff Garzik
M: jgarzik@pobox.com
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
NETWORKING [GENERAL]
P: Networking Team
-M: netdev@oss.sgi.com
-L: netdev@oss.sgi.com
+M: netdev@vger.kernel.org
+L: netdev@vger.kernel.org
S: Maintained
NETWORKING [IPv4/IPv6]
@@ -1608,7 +1624,7 @@ P: Hideaki YOSHIFUJI
M: yoshfuji@linux-ipv6.org
P: Patrick McHardy
M: kaber@coreworks.de
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
IPVS
@@ -1628,7 +1644,7 @@ NI5010 NETWORK DRIVER
P: Jan-Pascal van Best and Andreas Mohr
M: Jan-Pascal van Best
M: Andreas Mohr <100.30936@germany.net>
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER
@@ -1670,7 +1686,7 @@ P: Peter De Shrijver
M: p2@ace.ulyssis.student.kuleuven.ac.be
P: Mike Phillips
M: mikep@linuxtr.net
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
L: linux-tr@linuxtr.net
W: http://www.linuxtr.net
S: Maintained
@@ -1777,7 +1793,7 @@ S: Unmaintained
PCNET32 NETWORK DRIVER
P: Thomas Bogendörfer
M: tsbogend@alpha.franken.de
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
PHRAM MTD DRIVER
@@ -1789,7 +1805,7 @@ S: Maintained
POSIX CLOCKS and TIMERS
P: George Anzinger
M: george@mvista.com
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Supported
PNP SUPPORT
@@ -1824,7 +1840,7 @@ S: Supported
PRISM54 WIRELESS DRIVER
P: Prism54 Development Team
M: prism54-private@prism54.org
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
W: http://prism54.org
S: Maintained
@@ -2041,7 +2057,7 @@ SIS 900/7016 FAST ETHERNET DRIVER
P: Daniele Venzano
M: venza@brownhat.org
W: http://www.brownhat.org/sis900.html
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
SIS FRAMEBUFFER DRIVER
@@ -2059,7 +2075,7 @@ S: Maintained
SMSC47M1 HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
S: Odd Fixes
SMB FILESYSTEM
@@ -2100,7 +2116,7 @@ S: Maintained
SONIC NETWORK DRIVER
P: Thomas Bogendoerfer
M: tsbogend@alpha.franken.de
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Maintained
SONY VAIO CONTROL DEVICE DRIVER
@@ -2157,7 +2173,7 @@ S: Supported
SPX NETWORK LAYER
P: Jay Schulist
M: jschlst@samba.org
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
S: Supported
SRM (Alpha) environment access
@@ -2236,7 +2252,7 @@ S: Maintained
TOKEN-RING NETWORK DRIVER
P: Mike Phillips
M: mikep@linuxtr.net
-L: netdev@oss.sgi.com
+L: netdev@vger.kernel.org
L: linux-tr@linuxtr.net
W: http://www.linuxtr.net
S: Maintained
@@ -2598,7 +2614,7 @@ S: Orphan
W1 DALLAS'S 1-WIRE BUS
P: Evgeniy Polyakov
M: johnpol@2ka.mipt.ru
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
S: Maintained
W83L51xD SD/MMC CARD INTERFACE DRIVER
@@ -2611,7 +2627,7 @@ S: Maintained
W83L785TS HARDWARE MONITOR DRIVER
P: Jean Delvare
M: khali@linux-fr.org
-L: sensors@stimpy.netroedge.com
+L: lm-sensors@lm-sensors.org
S: Odd Fixes
WAN ROUTER & SANGOMA WANPIPE DRIVERS & API (X.25, FRAME RELAY, PPP, CISCO HDLC)
diff --git a/Makefile b/Makefile
index bddcb861b49bbb90bc5646a7da5c55833f4689b5..0d1e74d50067dbce4bd3dc9bcbd7954460b5da61 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 12
-EXTRAVERSION =-rc4
+EXTRAVERSION =
NAME=Woozy Numbat
# *DOCUMENTATION*
@@ -530,7 +530,7 @@ endif
include $(srctree)/arch/$(ARCH)/Makefile
# arch Makefile may override CC so keep this after arch Makefile is included
-NOSTDINC_FLAGS := -nostdinc -isystem $(shell $(CC) -print-file-name=include)
+NOSTDINC_FLAGS += -nostdinc -isystem $(shell $(CC) -print-file-name=include)
CHECKFLAGS += $(NOSTDINC_FLAGS)
# warn about C99 declaration after statement
diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c
index 64e450dddb49d55c3ddea43bb35371958f52369a..167fd89f8707aeb1b0ad59190e9fa352718d5900 100644
--- a/arch/alpha/kernel/osf_sys.c
+++ b/arch/alpha/kernel/osf_sys.c
@@ -1150,16 +1150,13 @@ osf_usleep_thread(struct timeval32 __user *sleep, struct timeval32 __user *remai
if (get_tv32(&tmp, sleep))
goto fault;
- ticks = tmp.tv_usec;
- ticks = (ticks + (1000000 / HZ) - 1) / (1000000 / HZ);
- ticks += tmp.tv_sec * HZ;
+ ticks = timeval_to_jiffies(&tmp);
current->state = TASK_INTERRUPTIBLE;
ticks = schedule_timeout(ticks);
if (remain) {
- tmp.tv_sec = ticks / HZ;
- tmp.tv_usec = ticks % HZ;
+ jiffies_to_timeval(ticks, &tmp);
if (put_tv32(remain, &tmp))
goto fault;
}
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index bf397a9f8ac29bf0438234817963075149af7d39..ee8a9ad7bbd95343f46cd20e9467e062eaf848f2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -67,10 +67,6 @@ config GENERIC_BUST_SPINLOCK
config GENERIC_ISA_DMA
bool
-config GENERIC_IOMAP
- bool
- default y
-
config FIQ
bool
@@ -202,6 +198,11 @@ config ARCH_H720X
help
This enables support for systems based on the Hynix HMS720x
+config ARCH_AAEC2000
+ bool "Agilent AAEC-2000 based"
+ help
+ This enables support for systems based on the Agilent AAEC-2000
+
endchoice
source "arch/arm/mach-clps711x/Kconfig"
@@ -234,6 +235,8 @@ source "arch/arm/mach-h720x/Kconfig"
source "arch/arm/mach-versatile/Kconfig"
+source "arch/arm/mach-aaec2000/Kconfig"
+
# Definitions to make life easier
config ARCH_ACORN
bool
@@ -277,7 +280,7 @@ config ISA_DMA_API
default y
config PCI
- bool "PCI support" if ARCH_INTEGRATOR_AP
+ bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
@@ -497,7 +500,7 @@ source "drivers/cpufreq/Kconfig"
config CPU_FREQ_SA1100
bool
- depends on CPU_FREQ && (SA1100_LART || SA1100_PLEB)
+ depends on CPU_FREQ && (SA1100_H3100 || SA1100_H3600 || SA1100_H3800 || SA1100_LART || SA1100_PLEB || SA1100_BADGE4 || SA1100_HACKKIT)
default y
config CPU_FREQ_SA1110
@@ -689,7 +692,9 @@ source "drivers/block/Kconfig"
source "drivers/acorn/block/Kconfig"
-if ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
+if PCMCIA || ARCH_CLPS7500 || ARCH_IOP3XX || ARCH_IXP4XX \
+ || ARCH_L7200 || ARCH_LH7A40X || ARCH_PXA || ARCH_RPC \
+ || ARCH_S3C2410 || ARCH_SA1100 || ARCH_SHARK || FOOTBRIDGE
source "drivers/ide/Kconfig"
endif
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 2277e3d179cc79ea84e12fc72e0676cbb9e6f46d..8330495e2448bc33f2ad7236b4fb5e4a45ebb2a1 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -97,6 +97,7 @@ textaddr-$(CONFIG_ARCH_FORTUNET) := 0xc0008000
machine-$(CONFIG_ARCH_VERSATILE) := versatile
machine-$(CONFIG_ARCH_IMX) := imx
machine-$(CONFIG_ARCH_H720X) := h720x
+ machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
ifeq ($(CONFIG_ARCH_EBSA110),y)
# This is what happens if you forget the IOCS16 line.
diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S
index 665bd2c2074303d44b7c3593125c7659cc5258f8..d3fe2533907ec1af9c812362eb91802a8af713f4 100644
--- a/arch/arm/boot/compressed/head-xscale.S
+++ b/arch/arm/boot/compressed/head-xscale.S
@@ -47,3 +47,10 @@ __XScale_start:
orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00)
#endif
+#ifdef CONFIG_ARCH_IXP2000
+ mov r1, #-1
+ mov r0, #0xd6000000
+ str r1, [r0, #0x14]
+ str r1, [r0, #0x18]
+#endif
+
diff --git a/arch/arm/common/amba.c b/arch/arm/common/amba.c
index a0507f8c33fe815838a825a6abf069e035eeaef1..c6beb751f2a93b4057a49df188d8522e1809dcdc 100644
--- a/arch/arm/common/amba.c
+++ b/arch/arm/common/amba.c
@@ -169,7 +169,7 @@ static void amba_device_release(struct device *dev)
}
#define amba_attr(name,fmt,arg...) \
-static ssize_t show_##name(struct device *_dev, char *buf) \
+static ssize_t show_##name(struct device *_dev, struct device_attribute *attr, char *buf) \
{ \
struct amba_device *dev = to_amba_device(_dev); \
return sprintf(buf, fmt, arg); \
diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c
index 5797b1b100a1bc707031a3d7f169658261f4fe36..cbf2165476b09df908799fa7660e9c9e5681ac17 100644
--- a/arch/arm/common/dmabounce.c
+++ b/arch/arm/common/dmabounce.c
@@ -30,6 +30,8 @@
#include
#include
+#include
+
#undef DEBUG
#undef STATS
@@ -91,15 +93,12 @@ static void print_alloc_stats(struct dmabounce_device_info *device_info)
static inline struct dmabounce_device_info *
find_dmabounce_dev(struct device *dev)
{
- struct list_head *entry;
-
- list_for_each(entry, &dmabounce_devs) {
- struct dmabounce_device_info *d =
- list_entry(entry, struct dmabounce_device_info, node);
+ struct dmabounce_device_info *d;
+ list_for_each_entry(d, &dmabounce_devs, node)
if (d->dev == dev)
return d;
- }
+
return NULL;
}
@@ -170,15 +169,11 @@ alloc_safe_buffer(struct dmabounce_device_info *device_info, void *ptr,
static inline struct safe_buffer *
find_safe_buffer(struct dmabounce_device_info *device_info, dma_addr_t safe_dma_addr)
{
- struct list_head *entry;
-
- list_for_each(entry, &device_info->safe_buffers) {
- struct safe_buffer *b =
- list_entry(entry, struct safe_buffer, node);
+ struct safe_buffer *b;
+ list_for_each_entry(b, &device_info->safe_buffers, node)
if (b->safe_dma_addr == safe_dma_addr)
return b;
- }
return NULL;
}
@@ -299,15 +294,26 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
__func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr),
buf->safe, (void *) buf->safe_dma_addr);
-
DO_STATS ( device_info->bounce_count++ );
- if ((dir == DMA_FROM_DEVICE) ||
- (dir == DMA_BIDIRECTIONAL)) {
+ if (dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL) {
+ unsigned long ptr;
+
dev_dbg(dev,
"%s: copy back safe %p to unsafe %p size %d\n",
__func__, buf->safe, buf->ptr, size);
memcpy(buf->ptr, buf->safe, size);
+
+ /*
+ * DMA buffers must have the same cache properties
+ * as if they were really used for DMA - which means
+ * data must be written back to RAM. Note that
+ * we don't use dmac_flush_range() here for the
+ * bidirectional case because we know the cache
+ * lines will be coherent with the data written.
+ */
+ ptr = (unsigned long)buf->ptr;
+ dmac_clean_range(ptr, ptr + size);
}
free_safe_buffer(device_info, buf);
}
diff --git a/arch/arm/common/sa1111.c b/arch/arm/common/sa1111.c
index 21fce3414ed1e2f552c83f4633066e90da57337d..38c2eb667eb9909bd0db0667d6b7461bc4c38c57 100644
--- a/arch/arm/common/sa1111.c
+++ b/arch/arm/common/sa1111.c
@@ -721,16 +721,17 @@ __sa1111_probe(struct device *me, struct resource *mem, int irq)
return ret;
}
+static int sa1111_remove_one(struct device *dev, void *data)
+{
+ device_unregister(dev);
+ return 0;
+}
+
static void __sa1111_remove(struct sa1111 *sachip)
{
- struct list_head *l, *n;
void __iomem *irqbase = sachip->base + SA1111_INTC;
- list_for_each_safe(l, n, &sachip->dev->children) {
- struct device *d = list_to_dev(l);
-
- device_unregister(d);
- }
+ device_for_each_child(sachip->dev, NULL, sa1111_remove_one);
/* disable all IRQs */
sa1111_writel(0, irqbase + SA1111_INTEN0);
diff --git a/arch/arm/common/sharpsl_param.c b/arch/arm/common/sharpsl_param.c
index c2c557a224c2af0b7c558263e920f42868795cf0..c94864c5b1af568ae3fb796f6790d4f4850de283 100644
--- a/arch/arm/common/sharpsl_param.c
+++ b/arch/arm/common/sharpsl_param.c
@@ -22,7 +22,7 @@
* them early in the boot process, then pass them to the appropriate drivers.
* Not all devices use all paramaters but the format is common to all.
*/
-#ifdef ARCH_SA1100
+#ifdef CONFIG_ARCH_SA1100
#define PARAM_BASE 0xe8ffc000
#else
#define PARAM_BASE 0xa0000a00
diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig
index 2b4059d2f8e457c05af2cba17f060b7dcf252388..5d92af975d870ae59b162d33e7ca49e56cca924d 100644
--- a/arch/arm/configs/badge4_defconfig
+++ b/arch/arm/configs/badge4_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Sat Mar 26 21:32:26 2005
+# Linux kernel version: 2.6.12-rc6-git3
+# Thu Jun 9 19:00:50 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -34,6 +35,8 @@ CONFIG_EMBEDDED=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -109,7 +112,6 @@ CONFIG_CPU_ABRT_EV4=y
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
#
# Processor Features
@@ -122,6 +124,7 @@ CONFIG_FORCE_MAX_ZONEORDER=9
# Bus support
#
CONFIG_ISA=y
+CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -131,6 +134,7 @@ CONFIG_ISA=y
#
# Kernel Features
#
+# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_DISCONTIGMEM=y
# CONFIG_LEDS is not set
@@ -152,12 +156,14 @@ CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_SA1100=y
#
# Floating point emulation
@@ -294,7 +300,6 @@ CONFIG_PARPORT_NOT_PC=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_PARIDE is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
@@ -428,7 +433,6 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -526,6 +530,7 @@ CONFIG_IRDA_ULTRA=y
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
CONFIG_SA1100_FIR=y
+# CONFIG_VIA_FIR is not set
CONFIG_BT=m
CONFIG_BT_L2CAP=m
# CONFIG_BT_SCO is not set
@@ -618,7 +623,6 @@ CONFIG_NET_WIRELESS=y
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -687,7 +691,6 @@ CONFIG_RTC=m
#
# TPM devices
#
-# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -736,6 +739,7 @@ CONFIG_I2C_ELEKTOR=m
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@@ -747,6 +751,7 @@ CONFIG_I2C_ELEKTOR=m
#
# Other I2C Chip support
#
+# CONFIG_SENSORS_DS1337 is not set
# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_SENSORS_PCF8591 is not set
@@ -871,7 +876,6 @@ CONFIG_USB_PRINTER=m
#
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
-# CONFIG_USB_STORAGE_RW_DETECT is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
@@ -954,9 +958,11 @@ CONFIG_USB_USS720=m
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
+# CONFIG_USB_SERIAL_AIRPRIME is not set
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
+# CONFIG_USB_SERIAL_CP2101 is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -985,6 +991,7 @@ CONFIG_USB_SERIAL_KEYSPAN=m
# CONFIG_USB_SERIAL_KOBIL_SCT is not set
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
+# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
diff --git a/arch/arm/configs/enp2611_defconfig b/arch/arm/configs/enp2611_defconfig
index e8f9fccffe84a02809fd5f40306ac712d4da09bf..06fae4b62774659a1b6389db4a1a5d56f5a088c2 100644
--- a/arch/arm/configs/enp2611_defconfig
+++ b/arch/arm/configs/enp2611_defconfig
@@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
#
# System Type
diff --git a/arch/arm/configs/h3600_defconfig b/arch/arm/configs/h3600_defconfig
index b4e297dd54b2286374dfa6814018fb65f03bf2cd..b9de07de80feac1f708039d39940864c5192c94b 100644
--- a/arch/arm/configs/h3600_defconfig
+++ b/arch/arm/configs/h3600_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:02:26 2005
+# Linux kernel version: 2.6.12-rc4
+# Thu Jun 9 01:59:03 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -33,6 +34,8 @@ CONFIG_KOBJECT_UEVENT=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -120,6 +123,7 @@ CONFIG_CPU_MINICACHE=y
# Bus support
#
CONFIG_ISA=y
+CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -138,6 +142,7 @@ CONFIG_PCMCIA_SA1100=y
#
# Kernel Features
#
+# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_DISCONTIGMEM=y
# CONFIG_LEDS is not set
@@ -159,12 +164,13 @@ CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+# CONFIG_CPU_FREQ_GOV_PERFORMANCE is not set
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+CONFIG_CPU_FREQ_SA1100=y
#
# Floating point emulation
@@ -298,7 +304,6 @@ CONFIG_MTD_SA1100=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
@@ -379,7 +384,6 @@ CONFIG_NET=y
# Networking options
#
# CONFIG_PACKET is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -476,6 +480,7 @@ CONFIG_IRCOMM=m
# CONFIG_SMC_IRCC_FIR is not set
# CONFIG_ALI_FIR is not set
CONFIG_SA1100_FIR=m
+# CONFIG_VIA_FIR is not set
# CONFIG_BT is not set
CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set
@@ -647,7 +652,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# TPM devices
#
-# CONFIG_TCG_TPM is not set
#
# I2C support
@@ -676,9 +680,11 @@ CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
CONFIG_FB_SOFT_CURSOR=y
+# CONFIG_FB_MACMODES is not set
# CONFIG_FB_MODE_HELPERS is not set
# CONFIG_FB_TILEBLITTING is not set
CONFIG_FB_SA1100=y
+# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_VIRTUAL is not set
#
diff --git a/arch/arm/configs/hackkit_defconfig b/arch/arm/configs/hackkit_defconfig
index 6987c8c5ddb4ac3fe28f2285f3d7b4e7f235d03f..fb41a36a5a68fe42ce39f08a3367b9abf984ac6b 100644
--- a/arch/arm/configs/hackkit_defconfig
+++ b/arch/arm/configs/hackkit_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.12-rc1-bk2
-# Mon Mar 28 00:22:34 2005
+# Linux kernel version: 2.6.12-rc6-git3
+# Thu Jun 9 20:58:58 2005
#
CONFIG_ARM=y
CONFIG_MMU=y
@@ -16,6 +16,7 @@ CONFIG_GENERIC_IOMAP=y
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
#
# General setup
@@ -34,6 +35,8 @@ CONFIG_KOBJECT_UEVENT=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+CONFIG_PRINTK=y
+CONFIG_BUG=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
@@ -109,7 +112,6 @@ CONFIG_CPU_ABRT_EV4=y
CONFIG_CPU_CACHE_V4WB=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_TLB_V4WB=y
-CONFIG_CPU_MINICACHE=y
#
# Processor Features
@@ -119,6 +121,7 @@ CONFIG_CPU_MINICACHE=y
# Bus support
#
CONFIG_ISA=y
+CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
@@ -128,6 +131,7 @@ CONFIG_ISA=y
#
# Kernel Features
#
+# CONFIG_SMP is not set
# CONFIG_PREEMPT is not set
CONFIG_DISCONTIGMEM=y
CONFIG_LEDS=y
@@ -151,12 +155,14 @@ CONFIG_CPU_FREQ_TABLE=y
# CONFIG_CPU_FREQ_DEBUG is not set
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
+# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set
-# CONFIG_CPU_FREQ_GOV_USERSPACE is not set
+CONFIG_CPU_FREQ_GOV_USERSPACE=y
# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set
+# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set
+CONFIG_CPU_FREQ_SA1100=y
#
# Floating point emulation
@@ -280,7 +286,6 @@ CONFIG_MTD_CFI_UTIL=y
#
# Block devices
#
-# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_XD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
@@ -338,7 +343,6 @@ CONFIG_NET=y
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
-# CONFIG_NETLINK_DEV is not set
CONFIG_UNIX=y
# CONFIG_NET_KEY is not set
CONFIG_INET=y
@@ -484,7 +488,6 @@ CONFIG_SERIO=y
CONFIG_SERIO_SERPORT=y
# CONFIG_SERIO_RAW is not set
# CONFIG_GAMEPORT is not set
-CONFIG_SOUND_GAMEPORT=y
#
# Character devices
@@ -533,7 +536,6 @@ CONFIG_LEGACY_PTY_COUNT=256
#
# TPM devices
#
-# CONFIG_TCG_TPM is not set
#
# I2C support
diff --git a/arch/arm/configs/ixdp2400_defconfig b/arch/arm/configs/ixdp2400_defconfig
index 4fd663ecbe39085376bfdefeea608723cee85e5d..810a450a55d22a4c1dbcc139688f937aafab9db8 100644
--- a/arch/arm/configs/ixdp2400_defconfig
+++ b/arch/arm/configs/ixdp2400_defconfig
@@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
#
# System Type
diff --git a/arch/arm/configs/ixdp2401_defconfig b/arch/arm/configs/ixdp2401_defconfig
index 6f51c98084a3500727de6283825cbf7c58a7efbe..72e1b940e975b858769ac25ce0556dee0b0d0c62 100644
--- a/arch/arm/configs/ixdp2401_defconfig
+++ b/arch/arm/configs/ixdp2401_defconfig
@@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
#
# System Type
diff --git a/arch/arm/configs/ixdp2800_defconfig b/arch/arm/configs/ixdp2800_defconfig
index 7be3521f91fc85e27053fd4fb922021dc058e45d..1592e45f027839e7967ef26c17e79bdc44bd1f64 100644
--- a/arch/arm/configs/ixdp2800_defconfig
+++ b/arch/arm/configs/ixdp2800_defconfig
@@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
#
# System Type
diff --git a/arch/arm/configs/ixdp2801_defconfig b/arch/arm/configs/ixdp2801_defconfig
index cd84a20f30f1e79b327466410d9b75b77802e551..f1afe3d09ec66c5797ed553f1de4d1c1138396ed 100644
--- a/arch/arm/configs/ixdp2801_defconfig
+++ b/arch/arm/configs/ixdp2801_defconfig
@@ -50,7 +50,13 @@ CONFIG_BASE_SMALL=0
#
# Loadable module support
#
-# CONFIG_MODULES is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_MODULE_FORCE_UNLOAD is not set
+CONFIG_OBSOLETE_MODPARM=y
+# CONFIG_MODVERSIONS is not set
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_KMOD=y
#
# System Type
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index 4a2af55e134bcdc2cb07f01fc45d85458c673d94..3e1b0327e4d7a3a9bc25920eb98f6c5ab43c4b81 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -6,7 +6,7 @@ AFLAGS_head.o := -DTEXTADDR=$(TEXTADDR) -DDATAADDR=$(DATAADDR)
# Object file lists.
-obj-y := arch.o compat.o dma.o entry-armv.o entry-common.o irq.o \
+obj-y := compat.o dma.o entry-armv.o entry-common.o irq.o \
process.o ptrace.o semaphore.o setup.o signal.o sys_arm.o \
time.o traps.o
diff --git a/arch/arm/kernel/arch.c b/arch/arm/kernel/arch.c
deleted file mode 100644
index 4e02fbeb10a6cd5a6feb399d520565b8e95986e4..0000000000000000000000000000000000000000
--- a/arch/arm/kernel/arch.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * linux/arch/arm/kernel/arch.c
- *
- * Architecture specific fixups.
- */
-#include
-#include
-#include
-
-#include
-#include
-#include
-#include
-
-unsigned int vram_size;
-
-#ifdef CONFIG_ARCH_ACORN
-
-unsigned int memc_ctrl_reg;
-unsigned int number_mfm_drives;
-
-static int __init parse_tag_acorn(const struct tag *tag)
-{
- memc_ctrl_reg = tag->u.acorn.memc_control_reg;
- number_mfm_drives = tag->u.acorn.adfsdrives;
-
- switch (tag->u.acorn.vram_pages) {
- case 512:
- vram_size += PAGE_SIZE * 256;
- case 256:
- vram_size += PAGE_SIZE * 256;
- default:
- break;
- }
-#if 0
- if (vram_size) {
- desc->video_start = 0x02000000;
- desc->video_end = 0x02000000 + vram_size;
- }
-#endif
- return 0;
-}
-
-__tagtable(ATAG_ACORN, parse_tag_acorn);
-
-#endif
diff --git a/arch/arm/kernel/ecard.c b/arch/arm/kernel/ecard.c
index 3dc15b131f532e4494e0dffa5ba4ed99fa703688..6540db6913381f4474d12594c6a84376d53724dd 100644
--- a/arch/arm/kernel/ecard.c
+++ b/arch/arm/kernel/ecard.c
@@ -866,19 +866,19 @@ static struct expansion_card *__init ecard_alloc_card(int type, int slot)
return ec;
}
-static ssize_t ecard_show_irq(struct device *dev, char *buf)
+static ssize_t ecard_show_irq(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%u\n", ec->irq);
}
-static ssize_t ecard_show_dma(struct device *dev, char *buf)
+static ssize_t ecard_show_dma(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%u\n", ec->dma);
}
-static ssize_t ecard_show_resources(struct device *dev, char *buf)
+static ssize_t ecard_show_resources(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
char *str = buf;
@@ -893,19 +893,19 @@ static ssize_t ecard_show_resources(struct device *dev, char *buf)
return str - buf;
}
-static ssize_t ecard_show_vendor(struct device *dev, char *buf)
+static ssize_t ecard_show_vendor(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%u\n", ec->cid.manufacturer);
}
-static ssize_t ecard_show_device(struct device *dev, char *buf)
+static ssize_t ecard_show_device(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%u\n", ec->cid.product);
}
-static ssize_t ecard_show_type(struct device *dev, char *buf)
+static ssize_t ecard_show_type(struct device *dev, struct device_attribute *attr, char *buf)
{
struct expansion_card *ec = ECARD_DEV(dev);
return sprintf(buf, "%s\n", ec->type == ECARD_EASI ? "EASI" : "IOC");
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 4eb36155dc93fa169b8853a75cd746566a31da49..39a6c1b0b9a32db8f578bab2d9f4156acc5d4054 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -23,49 +23,92 @@
#include "entry-header.S"
+/*
+ * Interrupt handling. Preserves r7, r8, r9
+ */
+ .macro irq_handler
+1: get_irqnr_and_base r0, r6, r5, lr
+ movne r1, sp
+ @
+ @ routine called with r0 = irq number, r1 = struct pt_regs *
+ @
+ adrne lr, 1b
+ bne asm_do_IRQ
+
+#ifdef CONFIG_SMP
+ /*
+ * XXX
+ *
+ * this macro assumes that irqstat (r6) and base (r5) are
+ * preserved from get_irqnr_and_base above
+ */
+ test_for_ipi r0, r6, r5, lr
+ movne r0, sp
+ adrne lr, 1b
+ bne do_IPI
+#endif
+
+ .endm
+
/*
* Invalid mode handlers
*/
- .macro inv_entry, sym, reason
- sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go
- stmia sp, {r0 - lr} @ Save XXX r0 - lr
- ldr r4, .LC\sym
+ .macro inv_entry, reason
+ sub sp, sp, #S_FRAME_SIZE
+ stmib sp, {r1 - lr}
mov r1, #\reason
.endm
__pabt_invalid:
- inv_entry abt, BAD_PREFETCH
- b 1f
+ inv_entry BAD_PREFETCH
+ b common_invalid
__dabt_invalid:
- inv_entry abt, BAD_DATA
- b 1f
+ inv_entry BAD_DATA
+ b common_invalid
__irq_invalid:
- inv_entry irq, BAD_IRQ
- b 1f
+ inv_entry BAD_IRQ
+ b common_invalid
__und_invalid:
- inv_entry und, BAD_UNDEFINSTR
+ inv_entry BAD_UNDEFINSTR
+
+ @
+ @ XXX fall through to common_invalid
+ @
+
+@
+@ common_invalid - generic code for failed exception (re-entrant version of handlers)
+@
+common_invalid:
+ zero_fp
+
+ ldmia r0, {r4 - r6}
+ add r0, sp, #S_PC @ here for interlock avoidance
+ mov r7, #-1 @ "" "" "" ""
+ str r4, [sp] @ save preserved r0
+ stmia r0, {r5 - r7} @ lr_,
+ @ cpsr_, "old_r0"
-1: zero_fp
- ldmia r4, {r5 - r7} @ Get XXX pc, cpsr, old_r0
- add r4, sp, #S_PC
- stmia r4, {r5 - r7} @ Save XXX pc, cpsr, old_r0
mov r0, sp
- and r2, r6, #31 @ int mode
+ and r2, r6, #0x1f
b bad_mode
/*
* SVC mode handlers
*/
- .macro svc_entry, sym
+ .macro svc_entry
sub sp, sp, #S_FRAME_SIZE
- stmia sp, {r0 - r12} @ save r0 - r12
- ldr r2, .LC\sym
- add r0, sp, #S_FRAME_SIZE
- ldmia r2, {r2 - r4} @ get pc, cpsr
- add r5, sp, #S_SP
+ stmib sp, {r1 - r12}
+
+ ldmia r0, {r1 - r3}
+ add r5, sp, #S_SP @ here for interlock avoidance
+ mov r4, #-1 @ "" "" "" ""
+ add r0, sp, #S_FRAME_SIZE @ "" "" "" ""
+ str r1, [sp] @ save the "real" r0 copied
+ @ from the exception stack
+
mov r1, lr
@
@@ -82,7 +125,7 @@ __und_invalid:
.align 5
__dabt_svc:
- svc_entry abt
+ svc_entry
@
@ get ready to re-enable interrupts if appropriate
@@ -129,28 +172,24 @@ __dabt_svc:
.align 5
__irq_svc:
- svc_entry irq
+ svc_entry
+
#ifdef CONFIG_PREEMPT
- get_thread_info r8
- ldr r9, [r8, #TI_PREEMPT] @ get preempt count
- add r7, r9, #1 @ increment it
- str r7, [r8, #TI_PREEMPT]
+ get_thread_info tsk
+ ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
+ add r7, r8, #1 @ increment it
+ str r7, [tsk, #TI_PREEMPT]
#endif
-1: get_irqnr_and_base r0, r6, r5, lr
- movne r1, sp
- @
- @ routine called with r0 = irq number, r1 = struct pt_regs *
- @
- adrne lr, 1b
- bne asm_do_IRQ
+
+ irq_handler
#ifdef CONFIG_PREEMPT
- ldr r0, [r8, #TI_FLAGS] @ get flags
+ ldr r0, [tsk, #TI_FLAGS] @ get flags
tst r0, #_TIF_NEED_RESCHED
blne svc_preempt
preempt_return:
- ldr r0, [r8, #TI_PREEMPT] @ read preempt value
+ ldr r0, [tsk, #TI_PREEMPT] @ read preempt value
+ str r8, [tsk, #TI_PREEMPT] @ restore preempt count
teq r0, r7
- str r9, [r8, #TI_PREEMPT] @ restore preempt count
strne r0, [r0, -r0] @ bug()
#endif
ldr r0, [sp, #S_PSR] @ irqs are already disabled
@@ -161,7 +200,7 @@ preempt_return:
#ifdef CONFIG_PREEMPT
svc_preempt:
- teq r9, #0 @ was preempt count = 0
+ teq r8, #0 @ was preempt count = 0
ldreq r6, .LCirq_stat
movne pc, lr @ no
ldr r0, [r6, #4] @ local_irq_count
@@ -169,9 +208,9 @@ svc_preempt:
adds r0, r0, r1
movne pc, lr
mov r7, #0 @ preempt_schedule_irq
- str r7, [r8, #TI_PREEMPT] @ expects preempt_count == 0
+ str r7, [tsk, #TI_PREEMPT] @ expects preempt_count == 0
1: bl preempt_schedule_irq @ irq en/disable is done inside
- ldr r0, [r8, #TI_FLAGS] @ get new tasks TI_FLAGS
+ ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS
tst r0, #_TIF_NEED_RESCHED
beq preempt_return @ go again
b 1b
@@ -179,7 +218,7 @@ svc_preempt:
.align 5
__und_svc:
- svc_entry und
+ svc_entry
@
@ call emulation code, which returns using r9 if it has emulated
@@ -209,7 +248,7 @@ __und_svc:
.align 5
__pabt_svc:
- svc_entry abt
+ svc_entry
@
@ re-enable interrupts if appropriate
@@ -242,12 +281,8 @@ __pabt_svc:
ldmia sp, {r0 - pc}^ @ load r0 - pc, cpsr
.align 5
-.LCirq:
- .word __temp_irq
-.LCund:
- .word __temp_und
-.LCabt:
- .word __temp_abt
+.LCcralign:
+ .word cr_alignment
#ifdef MULTI_ABORT
.LCprocfns:
.word processor
@@ -262,14 +297,18 @@ __pabt_svc:
/*
* User mode handlers
*/
- .macro usr_entry, sym
- sub sp, sp, #S_FRAME_SIZE @ Allocate frame size in one go
- stmia sp, {r0 - r12} @ save r0 - r12
- ldr r7, .LC\sym
- add r5, sp, #S_PC
- ldmia r7, {r2 - r4} @ Get USR pc, cpsr
-
-#if __LINUX_ARM_ARCH__ < 6
+ .macro usr_entry
+ sub sp, sp, #S_FRAME_SIZE
+ stmib sp, {r1 - r12}
+
+ ldmia r0, {r1 - r3}
+ add r0, sp, #S_PC @ here for interlock avoidance
+ mov r4, #-1 @ "" "" "" ""
+
+ str r1, [sp] @ save the "real" r0 copied
+ @ from the exception stack
+
+#if __LINUX_ARM_ARCH__ < 6 && !defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
@ make sure our user space atomic helper is aborted
cmp r2, #VIRT_OFFSET
bichs r3, r3, #PSR_Z_BIT
@@ -284,13 +323,13 @@ __pabt_svc:
@
@ Also, separately save sp_usr and lr_usr
@
- stmia r5, {r2 - r4}
- stmdb r5, {sp, lr}^
+ stmia r0, {r2 - r4}
+ stmdb r0, {sp, lr}^
@
@ Enable the alignment trap while in kernel mode
@
- alignment_trap r7, r0, __temp_\sym
+ alignment_trap r0
@
@ Clear FP to mark the first stack frame
@@ -300,7 +339,7 @@ __pabt_svc:
.align 5
__dabt_usr:
- usr_entry abt
+ usr_entry
@
@ Call the processor-specific abort handler:
@@ -329,30 +368,23 @@ __dabt_usr:
.align 5
__irq_usr:
- usr_entry irq
+ usr_entry
+ get_thread_info tsk
#ifdef CONFIG_PREEMPT
- get_thread_info r8
- ldr r9, [r8, #TI_PREEMPT] @ get preempt count
- add r7, r9, #1 @ increment it
- str r7, [r8, #TI_PREEMPT]
+ ldr r8, [tsk, #TI_PREEMPT] @ get preempt count
+ add r7, r8, #1 @ increment it
+ str r7, [tsk, #TI_PREEMPT]
#endif
-1: get_irqnr_and_base r0, r6, r5, lr
- movne r1, sp
- adrne lr, 1b
- @
- @ routine called with r0 = irq number, r1 = struct pt_regs *
- @
- bne asm_do_IRQ
+
+ irq_handler
#ifdef CONFIG_PREEMPT
- ldr r0, [r8, #TI_PREEMPT]
+ ldr r0, [tsk, #TI_PREEMPT]
+ str r8, [tsk, #TI_PREEMPT]
teq r0, r7
- str r9, [r8, #TI_PREEMPT]
strne r0, [r0, -r0]
- mov tsk, r8
-#else
- get_thread_info tsk
#endif
+
mov why, #0
b ret_to_user
@@ -360,7 +392,7 @@ __irq_usr:
.align 5
__und_usr:
- usr_entry und
+ usr_entry
tst r3, #PSR_T_BIT @ Thumb mode?
bne fpundefinstr @ ignore FP
@@ -476,7 +508,7 @@ fpundefinstr:
.align 5
__pabt_usr:
- usr_entry abt
+ usr_entry
enable_irq @ Enable interrupts
mov r0, r2 @ address (pc)
@@ -616,11 +648,17 @@ __kuser_helper_start:
__kuser_cmpxchg: @ 0xffff0fc0
-#if __LINUX_ARM_ARCH__ < 6
+#if defined(CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG)
-#ifdef CONFIG_SMP /* sanity check */
-#error "CONFIG_SMP on a machine supporting pre-ARMv6 processors?"
-#endif
+ /*
+ * Poor you. No fast solution possible...
+ * The kernel itself must perform the operation.
+ * A special ghost syscall is used for that (see traps.c).
+ */
+ swi #0x9ffff0
+ mov pc, lr
+
+#elif __LINUX_ARM_ARCH__ < 6
/*
* Theory of operation:
@@ -735,29 +773,41 @@ __kuser_helper_end:
*
* Common stub entry macro:
* Enter in IRQ mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
+ *
+ * SP points to a minimal amount of processor-private memory, the address
+ * of which is copied into r0 for the mode specific abort handler.
*/
- .macro vector_stub, name, sym, correction=0
+ .macro vector_stub, name, correction=0
.align 5
vector_\name:
- ldr r13, .LCs\sym
.if \correction
sub lr, lr, #\correction
.endif
- str lr, [r13] @ save lr_IRQ
+
+ @
+ @ Save r0, lr_ (parent PC) and spsr_
+ @ (parent CPSR)
+ @
+ stmia sp, {r0, lr} @ save r0, lr
mrs lr, spsr
- str lr, [r13, #4] @ save spsr_IRQ
+ str lr, [sp, #8] @ save spsr
+
@
- @ now branch to the relevant MODE handling routine
+ @ Prepare for SVC32 mode. IRQs remain disabled.
@
- mrs r13, cpsr
- bic r13, r13, #MODE_MASK
- orr r13, r13, #SVC_MODE
- msr spsr_cxsf, r13 @ switch to SVC_32 mode
+ mrs r0, cpsr
+ bic r0, r0, #MODE_MASK
+ orr r0, r0, #SVC_MODE
+ msr spsr_cxsf, r0
- and lr, lr, #15
+ @
+ @ the branch table must immediately follow this code
+ @
+ mov r0, sp
+ and lr, lr, #0x0f
ldr lr, [pc, lr, lsl #2]
- movs pc, lr @ Changes mode and branches
+ movs pc, lr @ branch to handler in SVC mode
.endm
.globl __stubs_start
@@ -765,7 +815,7 @@ __stubs_start:
/*
* Interrupt dispatcher
*/
- vector_stub irq, irq, 4
+ vector_stub irq, 4
.long __irq_usr @ 0 (USR_26 / USR_32)
.long __irq_invalid @ 1 (FIQ_26 / FIQ_32)
@@ -788,7 +838,7 @@ __stubs_start:
* Data abort dispatcher
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
*/
- vector_stub dabt, abt, 8
+ vector_stub dabt, 8
.long __dabt_usr @ 0 (USR_26 / USR_32)
.long __dabt_invalid @ 1 (FIQ_26 / FIQ_32)
@@ -811,7 +861,7 @@ __stubs_start:
* Prefetch abort dispatcher
* Enter in ABT mode, spsr = USR CPSR, lr = USR PC
*/
- vector_stub pabt, abt, 4
+ vector_stub pabt, 4
.long __pabt_usr @ 0 (USR_26 / USR_32)
.long __pabt_invalid @ 1 (FIQ_26 / FIQ_32)
@@ -834,7 +884,7 @@ __stubs_start:
* Undef instr entry dispatcher
* Enter in UND mode, spsr = SVC/USR CPSR, lr = SVC/USR PC
*/
- vector_stub und, und
+ vector_stub und
.long __und_usr @ 0 (USR_26 / USR_32)
.long __und_invalid @ 1 (FIQ_26 / FIQ_32)
@@ -888,13 +938,6 @@ vector_addrexcptn:
.LCvswi:
.word vector_swi
-.LCsirq:
- .word __temp_irq
-.LCsund:
- .word __temp_und
-.LCsabt:
- .word __temp_abt
-
.globl __stubs_end
__stubs_end:
@@ -916,23 +959,6 @@ __vectors_end:
.data
-/*
- * Do not reorder these, and do not insert extra data between...
- */
-
-__temp_irq:
- .word 0 @ saved lr_irq
- .word 0 @ saved spsr_irq
- .word -1 @ old_r0
-__temp_und:
- .word 0 @ Saved lr_und
- .word 0 @ Saved spsr_und
- .word -1 @ old_r0
-__temp_abt:
- .word 0 @ Saved lr_abt
- .word 0 @ Saved spsr_abt
- .word -1 @ old_r0
-
.globl cr_alignment
.globl cr_no_alignment
cr_alignment:
diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S
index a3d40a0e2b0479032a6d2f7126d64fb2ea626215..afef21273963a6599fde7330e555f52f302faf60 100644
--- a/arch/arm/kernel/entry-header.S
+++ b/arch/arm/kernel/entry-header.S
@@ -59,11 +59,10 @@
mov \rd, \rd, lsl #13
.endm
- .macro alignment_trap, rbase, rtemp, sym
+ .macro alignment_trap, rtemp
#ifdef CONFIG_ALIGNMENT_TRAP
-#define OFF_CR_ALIGNMENT(x) cr_alignment - x
-
- ldr \rtemp, [\rbase, #OFF_CR_ALIGNMENT(\sym)]
+ ldr \rtemp, .LCcralign
+ ldr \rtemp, [\rtemp]
mcr p15, 0, \rtemp, c1, c0
#endif
.endm
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 4733877296d41209f6e0b0dd6c5c66cf6a0f3762..bd4823c74645f0899f91d61199f000a5342be40d 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -2,6 +2,8 @@
* linux/arch/arm/kernel/head.S
*
* Copyright (C) 1994-2002 Russell King
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -165,6 +167,48 @@ __mmap_switched:
stmia r6, {r0, r4} @ Save control register values
b start_kernel
+#if defined(CONFIG_SMP)
+ .type secondary_startup, #function
+ENTRY(secondary_startup)
+ /*
+ * Common entry point for secondary CPUs.
+ *
+ * Ensure that we're in SVC mode, and IRQs are disabled. Lookup
+ * the processor type - there is no need to check the machine type
+ * as it has already been validated by the primary processor.
+ */
+ msr cpsr_c, #PSR_F_BIT | PSR_I_BIT | MODE_SVC
+ bl __lookup_processor_type
+ movs r10, r5 @ invalid processor?
+ moveq r0, #'p' @ yes, error 'p'
+ beq __error
+
+ /*
+ * Use the page tables supplied from __cpu_up.
+ */
+ adr r4, __secondary_data
+ ldmia r4, {r5, r6, r13} @ address to jump to after
+ sub r4, r4, r5 @ mmu has been enabled
+ ldr r4, [r6, r4] @ get secondary_data.pgdir
+ adr lr, __enable_mmu @ return address
+ add pc, r10, #12 @ initialise processor
+ @ (return control reg)
+
+ /*
+ * r6 = &secondary_data
+ */
+ENTRY(__secondary_switched)
+ ldr sp, [r6, #4] @ get secondary_data.stack
+ mov fp, #0
+ b secondary_start_kernel
+
+ .type __secondary_data, %object
+__secondary_data:
+ .long .
+ .long secondary_data
+ .long __secondary_switched
+#endif /* defined(CONFIG_SMP) */
+
/*
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index c2a7da3ac0f1fff7b310c8760984abfa70939299..8cf733daa8008f70090587f42be4d77c7acfc1a5 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -92,6 +92,14 @@ struct cpu_user_fns cpu_user;
struct cpu_cache_fns cpu_cache;
#endif
+struct stack {
+ u32 irq[3];
+ u32 abt[3];
+ u32 und[3];
+} ____cacheline_aligned;
+
+static struct stack stacks[NR_CPUS];
+
char elf_platform[ELF_PLATFORM_SIZE];
EXPORT_SYMBOL(elf_platform);
@@ -307,8 +315,6 @@ static void __init setup_processor(void)
cpu_name, processor_id, (int)processor_id & 15,
proc_arch[cpu_architecture()]);
- dump_cpu_info(smp_processor_id());
-
sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS);
sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
elf_hwcap = list->elf_hwcap;
@@ -316,6 +322,46 @@ static void __init setup_processor(void)
cpu_proc_init();
}
+/*
+ * cpu_init - initialise one CPU.
+ *
+ * cpu_init dumps the cache information, initialises SMP specific
+ * information, and sets up the per-CPU stacks.
+ */
+void cpu_init(void)
+{
+ unsigned int cpu = smp_processor_id();
+ struct stack *stk = &stacks[cpu];
+
+ if (cpu >= NR_CPUS) {
+ printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu);
+ BUG();
+ }
+
+ dump_cpu_info(cpu);
+
+ /*
+ * setup stacks for re-entrant exception handlers
+ */
+ __asm__ (
+ "msr cpsr_c, %1\n\t"
+ "add sp, %0, %2\n\t"
+ "msr cpsr_c, %3\n\t"
+ "add sp, %0, %4\n\t"
+ "msr cpsr_c, %5\n\t"
+ "add sp, %0, %6\n\t"
+ "msr cpsr_c, %7"
+ :
+ : "r" (stk),
+ "I" (PSR_F_BIT | PSR_I_BIT | IRQ_MODE),
+ "I" (offsetof(struct stack, irq[0])),
+ "I" (PSR_F_BIT | PSR_I_BIT | ABT_MODE),
+ "I" (offsetof(struct stack, abt[0])),
+ "I" (PSR_F_BIT | PSR_I_BIT | UND_MODE),
+ "I" (offsetof(struct stack, und[0])),
+ "I" (PSR_F_BIT | PSR_I_BIT | SVC_MODE));
+}
+
static struct machine_desc * __init setup_machine(unsigned int nr)
{
struct machine_desc *list;
@@ -349,6 +395,20 @@ static void __init early_initrd(char **p)
}
__early_param("initrd=", early_initrd);
+static void __init add_memory(unsigned long start, unsigned long size)
+{
+ /*
+ * Ensure that start/size are aligned to a page boundary.
+ * Size is appropriately rounded down, start is rounded up.
+ */
+ size -= start & ~PAGE_MASK;
+
+ meminfo.bank[meminfo.nr_banks].start = PAGE_ALIGN(start);
+ meminfo.bank[meminfo.nr_banks].size = size & PAGE_MASK;
+ meminfo.bank[meminfo.nr_banks].node = PHYS_TO_NID(start);
+ meminfo.nr_banks += 1;
+}
+
/*
* Pick out the memory size. We look for mem=size@start,
* where start and size are "size[KkMm]"
@@ -373,10 +433,7 @@ static void __init early_mem(char **p)
if (**p == '@')
start = memparse(*p + 1, p);
- meminfo.bank[meminfo.nr_banks].start = start;
- meminfo.bank[meminfo.nr_banks].size = size;
- meminfo.bank[meminfo.nr_banks].node = PHYS_TO_NID(start);
- meminfo.nr_banks += 1;
+ add_memory(start, size);
}
__early_param("mem=", early_mem);
@@ -518,11 +575,7 @@ static int __init parse_tag_mem32(const struct tag *tag)
tag->u.mem.start, tag->u.mem.size / 1024);
return -EINVAL;
}
- meminfo.bank[meminfo.nr_banks].start = tag->u.mem.start;
- meminfo.bank[meminfo.nr_banks].size = tag->u.mem.size;
- meminfo.bank[meminfo.nr_banks].node = PHYS_TO_NID(tag->u.mem.start);
- meminfo.nr_banks += 1;
-
+ add_memory(tag->u.mem.start, tag->u.mem.size);
return 0;
}
@@ -715,6 +768,8 @@ void __init setup_arch(char **cmdline_p)
paging_init(&meminfo, mdesc);
request_standard_resources(&meminfo, mdesc);
+ cpu_init();
+
/*
* Set up various architecture-specific pointers
*/
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 931919fd5121200e6c8a8cb80f696ab4dc265ae3..07ddeed61766559c1a6d12b1fb70f92608f31c8c 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -19,6 +19,7 @@
#include
#include "ptrace.h"
+#include "signal.h"
#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
@@ -35,7 +36,7 @@
#define SWI_THUMB_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_sigreturn - __NR_SYSCALL_BASE))
#define SWI_THUMB_RT_SIGRETURN (0xdf00 << 16 | 0x2700 | (__NR_rt_sigreturn - __NR_SYSCALL_BASE))
-static const unsigned long retcodes[4] = {
+const unsigned long sigreturn_codes[4] = {
SWI_SYS_SIGRETURN, SWI_THUMB_SIGRETURN,
SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN
};
@@ -500,17 +501,25 @@ setup_return(struct pt_regs *regs, struct k_sigaction *ka,
if (ka->sa.sa_flags & SA_SIGINFO)
idx += 2;
- if (__put_user(retcodes[idx], rc))
+ if (__put_user(sigreturn_codes[idx], rc))
return 1;
- /*
- * Ensure that the instruction cache sees
- * the return code written onto the stack.
- */
- flush_icache_range((unsigned long)rc,
- (unsigned long)(rc + 1));
-
- retcode = ((unsigned long)rc) + thumb;
+ if (cpsr & MODE32_BIT) {
+ /*
+ * 32-bit code can use the new high-page
+ * signal return code support.
+ */
+ retcode = KERN_SIGRETURN_CODE + (idx << 2) + thumb;
+ } else {
+ /*
+ * Ensure that the instruction cache sees
+ * the return code written onto the stack.
+ */
+ flush_icache_range((unsigned long)rc,
+ (unsigned long)(rc + 1));
+
+ retcode = ((unsigned long)rc) + thumb;
+ }
}
regs->ARM_r0 = usig;
diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h
new file mode 100644
index 0000000000000000000000000000000000000000..91d26faca62b58c6f07d9e50950cc54efaa0e9c2
--- /dev/null
+++ b/arch/arm/kernel/signal.h
@@ -0,0 +1,12 @@
+/*
+ * linux/arch/arm/kernel/signal.h
+ *
+ * Copyright (C) 2005 Russell King.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#define KERN_SIGRETURN_CODE 0xffff0500
+
+extern const unsigned long sigreturn_codes[4];
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index ecc8c3332408a1c7ed394b6badcd3b608baf156c..34892758f098c485f0b47e97083daf699a399878 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -24,6 +24,9 @@
#include
#include
#include
+#include
+#include
+#include
#include
#include
#include
@@ -36,6 +39,13 @@
cpumask_t cpu_present_mask;
cpumask_t cpu_online_map;
+/*
+ * as from 2.5, kernels no longer have an init_tasks structure
+ * so we need some other way of telling a new secondary core
+ * where to place its SVC stack
+ */
+struct secondary_data secondary_data;
+
/*
* structures for inter-processor calls
* - A collection of single bit ipi messages.
@@ -71,6 +81,8 @@ static DEFINE_SPINLOCK(smp_call_function_lock);
int __init __cpu_up(unsigned int cpu)
{
struct task_struct *idle;
+ pgd_t *pgd;
+ pmd_t *pmd;
int ret;
/*
@@ -83,12 +95,58 @@ int __init __cpu_up(unsigned int cpu)
return PTR_ERR(idle);
}
+ /*
+ * Allocate initial page tables to allow the new CPU to
+ * enable the MMU safely. This essentially means a set
+ * of our "standard" page tables, with the addition of
+ * a 1:1 mapping for the physical address of the kernel.
+ */
+ pgd = pgd_alloc(&init_mm);
+ pmd = pmd_offset(pgd, PHYS_OFFSET);
+ *pmd = __pmd((PHYS_OFFSET & PGDIR_MASK) |
+ PMD_TYPE_SECT | PMD_SECT_AP_WRITE);
+
+ /*
+ * We need to tell the secondary core where to find
+ * its stack and the page tables.
+ */
+ secondary_data.stack = (void *)idle->thread_info + THREAD_SIZE - 8;
+ secondary_data.pgdir = virt_to_phys(pgd);
+ wmb();
+
/*
* Now bring the CPU into our world.
*/
ret = boot_secondary(cpu, idle);
+ if (ret == 0) {
+ unsigned long timeout;
+
+ /*
+ * CPU was successfully started, wait for it
+ * to come online or time out.
+ */
+ timeout = jiffies + HZ;
+ while (time_before(jiffies, timeout)) {
+ if (cpu_online(cpu))
+ break;
+
+ udelay(10);
+ barrier();
+ }
+
+ if (!cpu_online(cpu))
+ ret = -EIO;
+ }
+
+ secondary_data.stack = 0;
+ secondary_data.pgdir = 0;
+
+ *pmd_offset(pgd, PHYS_OFFSET) = __pmd(0);
+ pgd_free(pgd);
+
if (ret) {
- printk(KERN_CRIT "cpu_up: processor %d failed to boot\n", cpu);
+ printk(KERN_CRIT "CPU%u: processor failed to boot\n", cpu);
+
/*
* FIXME: We need to clean up the new idle thread. --rmk
*/
@@ -97,6 +155,56 @@ int __init __cpu_up(unsigned int cpu)
return ret;
}
+/*
+ * This is the secondary CPU boot entry. We're using this CPUs
+ * idle thread stack, but a set of temporary page tables.
+ */
+asmlinkage void __init secondary_start_kernel(void)
+{
+ struct mm_struct *mm = &init_mm;
+ unsigned int cpu = smp_processor_id();
+
+ printk("CPU%u: Booted secondary processor\n", cpu);
+
+ /*
+ * All kernel threads share the same mm context; grab a
+ * reference and switch to it.
+ */
+ atomic_inc(&mm->mm_users);
+ atomic_inc(&mm->mm_count);
+ current->active_mm = mm;
+ cpu_set(cpu, mm->cpu_vm_mask);
+ cpu_switch_mm(mm->pgd, mm);
+ enter_lazy_tlb(mm, current);
+
+ cpu_init();
+
+ /*
+ * Give the platform a chance to do its own initialisation.
+ */
+ platform_secondary_init(cpu);
+
+ /*
+ * Enable local interrupts.
+ */
+ local_irq_enable();
+ local_fiq_enable();
+
+ calibrate_delay();
+
+ smp_store_cpu_info(cpu);
+
+ /*
+ * OK, now it's safe to let the boot CPU continue
+ */
+ cpu_set(cpu, cpu_online_map);
+
+ /*
+ * OK, it's off to the idle thread for us
+ */
+ cpu_idle();
+}
+
/*
* Called by both boot and secondaries to move global data into
* per-processor storage.
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 14df16b983f4ca5c1c08c804ceb3df3659bec34c..2fb0a4cfb37a4af48c2365d500608ef871197e1a 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -30,6 +30,7 @@
#include
#include "ptrace.h"
+#include "signal.h"
const char *processor_modes[]=
{ "USER_26", "FIQ_26" , "IRQ_26" , "SVC_26" , "UK4_26" , "UK5_26" , "UK6_26" , "UK7_26" ,
@@ -464,6 +465,55 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs)
#endif
return 0;
+#ifdef CONFIG_NEEDS_SYSCALL_FOR_CMPXCHG
+ /*
+ * Atomically store r1 in *r2 if *r2 is equal to r0 for user space.
+ * Return zero in r0 if *MEM was changed or non-zero if no exchange
+ * happened. Also set the user C flag accordingly.
+ * If access permissions have to be fixed up then non-zero is
+ * returned and the operation has to be re-attempted.
+ *
+ * *NOTE*: This is a ghost syscall private to the kernel. Only the
+ * __kuser_cmpxchg code in entry-armv.S should be aware of its
+ * existence. Don't ever use this from user code.
+ */
+ case 0xfff0:
+ {
+ extern void do_DataAbort(unsigned long addr, unsigned int fsr,
+ struct pt_regs *regs);
+ unsigned long val;
+ unsigned long addr = regs->ARM_r2;
+ struct mm_struct *mm = current->mm;
+ pgd_t *pgd; pmd_t *pmd; pte_t *pte;
+
+ regs->ARM_cpsr &= ~PSR_C_BIT;
+ spin_lock(&mm->page_table_lock);
+ pgd = pgd_offset(mm, addr);
+ if (!pgd_present(*pgd))
+ goto bad_access;
+ pmd = pmd_offset(pgd, addr);
+ if (!pmd_present(*pmd))
+ goto bad_access;
+ pte = pte_offset_map(pmd, addr);
+ if (!pte_present(*pte) || !pte_write(*pte))
+ goto bad_access;
+ val = *(unsigned long *)addr;
+ val -= regs->ARM_r0;
+ if (val == 0) {
+ *(unsigned long *)addr = regs->ARM_r1;
+ regs->ARM_cpsr |= PSR_C_BIT;
+ }
+ spin_unlock(&mm->page_table_lock);
+ return val;
+
+ bad_access:
+ spin_unlock(&mm->page_table_lock);
+ /* simulate a read access fault */
+ do_DataAbort(addr, 15 + (1 << 11), regs);
+ return -1;
+ }
+#endif
+
default:
/* Calls 9f00xx..9f07ff are defined to return -ENOSYS
if not implemented, rather than raising SIGILL. This
@@ -634,6 +684,14 @@ void __init trap_init(void)
memcpy((void *)0xffff0000, __vectors_start, __vectors_end - __vectors_start);
memcpy((void *)0xffff0200, __stubs_start, __stubs_end - __stubs_start);
memcpy((void *)0xffff1000 - kuser_sz, __kuser_helper_start, kuser_sz);
+
+ /*
+ * Copy signal return handlers into the vector page, and
+ * set sigreturn to be a pointer to these.
+ */
+ memcpy((void *)KERN_SIGRETURN_CODE, sigreturn_codes,
+ sizeof(sigreturn_codes));
+
flush_icache_range(0xffff0000, 0xffff0000 + PAGE_SIZE);
modify_domain(DOMAIN_USER, DOMAIN_CLIENT);
}
diff --git a/arch/arm/lib/ashldi3.c b/arch/arm/lib/ashldi3.c
index 130f5a8396695b758180c0856b336a0d7814ac18..b62875cfd8f842fdc85c4e32ee9769b93fef920c 100644
--- a/arch/arm/lib/ashldi3.c
+++ b/arch/arm/lib/ashldi3.c
@@ -31,31 +31,26 @@ Boston, MA 02111-1307, USA. */
#include "gcclib.h"
-DItype
-__ashldi3 (DItype u, word_type b)
+s64 __ashldi3(s64 u, int b)
{
- DIunion w;
- word_type bm;
- DIunion uu;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
-
- bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
- if (bm <= 0)
- {
- w.s.low = 0;
- w.s.high = (USItype)uu.s.low << -bm;
- }
- else
- {
- USItype carries = (USItype)uu.s.low >> bm;
- w.s.low = (USItype)uu.s.low << b;
- w.s.high = ((USItype)uu.s.high << b) | carries;
- }
-
- return w.ll;
+ DIunion w;
+ int bm;
+ DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(s32) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ w.s.low = 0;
+ w.s.high = (u32) uu.s.low << -bm;
+ } else {
+ u32 carries = (u32) uu.s.low >> bm;
+ w.s.low = (u32) uu.s.low << b;
+ w.s.high = ((u32) uu.s.high << b) | carries;
+ }
+
+ return w.ll;
}
-
diff --git a/arch/arm/lib/ashrdi3.c b/arch/arm/lib/ashrdi3.c
index 71625d218f8d391266c2fd8b421e87838f2c6f33..9a8600a7543faf8159d029bf5b2dce40c8802852 100644
--- a/arch/arm/lib/ashrdi3.c
+++ b/arch/arm/lib/ashrdi3.c
@@ -31,31 +31,27 @@ Boston, MA 02111-1307, USA. */
#include "gcclib.h"
-DItype
-__ashrdi3 (DItype u, word_type b)
+s64 __ashrdi3(s64 u, int b)
{
- DIunion w;
- word_type bm;
- DIunion uu;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
-
- bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
- if (bm <= 0)
- {
- /* w.s.high = 1..1 or 0..0 */
- w.s.high = uu.s.high >> (sizeof (SItype) * BITS_PER_UNIT - 1);
- w.s.low = uu.s.high >> -bm;
- }
- else
- {
- USItype carries = (USItype)uu.s.high << bm;
- w.s.high = uu.s.high >> b;
- w.s.low = ((USItype)uu.s.low >> b) | carries;
- }
-
- return w.ll;
+ DIunion w;
+ int bm;
+ DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(s32) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ /* w.s.high = 1..1 or 0..0 */
+ w.s.high = uu.s.high >> (sizeof(s32) * BITS_PER_UNIT - 1);
+ w.s.low = uu.s.high >> -bm;
+ } else {
+ u32 carries = (u32) uu.s.high << bm;
+ w.s.high = uu.s.high >> b;
+ w.s.low = ((u32) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
}
diff --git a/arch/arm/lib/gcclib.h b/arch/arm/lib/gcclib.h
index 65314a3d9e273e932be1e1a3316b25f278d9f05f..8b6dcc656de779c3b2d030f0577238fe59e41954 100644
--- a/arch/arm/lib/gcclib.h
+++ b/arch/arm/lib/gcclib.h
@@ -1,25 +1,22 @@
/* gcclib.h -- definitions for various functions 'borrowed' from gcc-2.95.3 */
/* I Molton 29/07/01 */
-#define BITS_PER_UNIT 8
-#define SI_TYPE_SIZE (sizeof (SItype) * BITS_PER_UNIT)
+#include
-typedef unsigned int UQItype __attribute__ ((mode (QI)));
-typedef int SItype __attribute__ ((mode (SI)));
-typedef unsigned int USItype __attribute__ ((mode (SI)));
-typedef int DItype __attribute__ ((mode (DI)));
-typedef int word_type __attribute__ ((mode (__word__)));
-typedef unsigned int UDItype __attribute__ ((mode (DI)));
+#define BITS_PER_UNIT 8
+#define SI_TYPE_SIZE (sizeof(s32) * BITS_PER_UNIT)
#ifdef __ARMEB__
- struct DIstruct {SItype high, low;};
+struct DIstruct {
+ s32 high, low;
+};
#else
- struct DIstruct {SItype low, high;};
+struct DIstruct {
+ s32 low, high;
+};
#endif
-typedef union
-{
- struct DIstruct s;
- DItype ll;
+typedef union {
+ struct DIstruct s;
+ s64 ll;
} DIunion;
-
diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S
index 6d1d7c27806e407f6c2efaf0c1f7fcbc16927614..5e240e452af6af66b2d9d18321009fddea82c73e 100644
--- a/arch/arm/lib/io-writesw-armv4.S
+++ b/arch/arm/lib/io-writesw-armv4.S
@@ -87,9 +87,9 @@ ENTRY(__raw_writesw)
subs r2, r2, #2
orr ip, ip, r3, push_hbyte1
strh ip, [r0]
- bpl 2b
+ bpl 1b
-3: tst r2, #1
-2: movne ip, r3, lsr #8
+ tst r2, #1
+3: movne ip, r3, lsr #8
strneh ip, [r0]
mov pc, lr
diff --git a/arch/arm/lib/longlong.h b/arch/arm/lib/longlong.h
index 179eea4edc35cc3a1180214cad63ca7e2ef807de..90ae647e4d76dadf575c4395e87affce807f0e19 100644
--- a/arch/arm/lib/longlong.h
+++ b/arch/arm/lib/longlong.h
@@ -26,18 +26,18 @@
#define __BITS4 (SI_TYPE_SIZE / 4)
#define __ll_B (1L << (SI_TYPE_SIZE / 2))
-#define __ll_lowpart(t) ((USItype) (t) % __ll_B)
-#define __ll_highpart(t) ((USItype) (t) / __ll_B)
+#define __ll_lowpart(t) ((u32) (t) % __ll_B)
+#define __ll_highpart(t) ((u32) (t) / __ll_B)
/* Define auxiliary asm macros.
1) umul_ppmm(high_prod, low_prod, multipler, multiplicand)
- multiplies two USItype integers MULTIPLER and MULTIPLICAND,
- and generates a two-part USItype product in HIGH_PROD and
+ multiplies two u32 integers MULTIPLER and MULTIPLICAND,
+ and generates a two-part u32 product in HIGH_PROD and
LOW_PROD.
- 2) __umulsidi3(a,b) multiplies two USItype integers A and B,
- and returns a UDItype product. This is just a variant of umul_ppmm.
+ 2) __umulsidi3(a,b) multiplies two u32 integers A and B,
+ and returns a u64 product. This is just a variant of umul_ppmm.
3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
denominator) divides a two-word unsigned integer, composed by the
@@ -77,23 +77,23 @@
#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
__asm__ ("adds %1, %4, %5 \n\
adc %0, %2, %3" \
- : "=r" ((USItype) (sh)), \
- "=&r" ((USItype) (sl)) \
- : "%r" ((USItype) (ah)), \
- "rI" ((USItype) (bh)), \
- "%r" ((USItype) (al)), \
- "rI" ((USItype) (bl)))
+ : "=r" ((u32) (sh)), \
+ "=&r" ((u32) (sl)) \
+ : "%r" ((u32) (ah)), \
+ "rI" ((u32) (bh)), \
+ "%r" ((u32) (al)), \
+ "rI" ((u32) (bl)))
#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
__asm__ ("subs %1, %4, %5 \n\
sbc %0, %2, %3" \
- : "=r" ((USItype) (sh)), \
- "=&r" ((USItype) (sl)) \
- : "r" ((USItype) (ah)), \
- "rI" ((USItype) (bh)), \
- "r" ((USItype) (al)), \
- "rI" ((USItype) (bl)))
+ : "=r" ((u32) (sh)), \
+ "=&r" ((u32) (sl)) \
+ : "r" ((u32) (ah)), \
+ "rI" ((u32) (bh)), \
+ "r" ((u32) (al)), \
+ "rI" ((u32) (bl)))
#define umul_ppmm(xh, xl, a, b) \
-{register USItype __t0, __t1, __t2; \
+{register u32 __t0, __t1, __t2; \
__asm__ ("%@ Inlined umul_ppmm \n\
mov %2, %5, lsr #16 \n\
mov %0, %6, lsr #16 \n\
@@ -107,14 +107,14 @@
addcs %0, %0, #65536 \n\
adds %1, %1, %3, lsl #16 \n\
adc %0, %0, %3, lsr #16" \
- : "=&r" ((USItype) (xh)), \
- "=r" ((USItype) (xl)), \
+ : "=&r" ((u32) (xh)), \
+ "=r" ((u32) (xl)), \
"=&r" (__t0), "=&r" (__t1), "=r" (__t2) \
- : "r" ((USItype) (a)), \
- "r" ((USItype) (b)));}
+ : "r" ((u32) (a)), \
+ "r" ((u32) (b)));}
#define UMUL_TIME 20
#define UDIV_TIME 100
-#endif /* __arm__ */
+#endif /* __arm__ */
#define __umulsidi3(u, v) \
({DIunion __w; \
@@ -123,14 +123,14 @@
#define __udiv_qrnnd_c(q, r, n1, n0, d) \
do { \
- USItype __d1, __d0, __q1, __q0; \
- USItype __r1, __r0, __m; \
+ u32 __d1, __d0, __q1, __q0; \
+ u32 __r1, __r0, __m; \
__d1 = __ll_highpart (d); \
__d0 = __ll_lowpart (d); \
\
__r1 = (n1) % __d1; \
__q1 = (n1) / __d1; \
- __m = (USItype) __q1 * __d0; \
+ __m = (u32) __q1 * __d0; \
__r1 = __r1 * __ll_B | __ll_highpart (n0); \
if (__r1 < __m) \
{ \
@@ -143,7 +143,7 @@
\
__r0 = __r1 % __d1; \
__q0 = __r1 / __d1; \
- __m = (USItype) __q0 * __d0; \
+ __m = (u32) __q0 * __d0; \
__r0 = __r0 * __ll_B | __ll_lowpart (n0); \
if (__r0 < __m) \
{ \
@@ -154,7 +154,7 @@
} \
__r0 -= __m; \
\
- (q) = (USItype) __q1 * __ll_B | __q0; \
+ (q) = (u32) __q1 * __ll_B | __q0; \
(r) = __r0; \
} while (0)
@@ -163,14 +163,14 @@
#define count_leading_zeros(count, x) \
do { \
- USItype __xr = (x); \
- USItype __a; \
+ u32 __xr = (x); \
+ u32 __a; \
\
if (SI_TYPE_SIZE <= 32) \
{ \
- __a = __xr < ((USItype)1<<2*__BITS4) \
- ? (__xr < ((USItype)1<<__BITS4) ? 0 : __BITS4) \
- : (__xr < ((USItype)1<<3*__BITS4) ? 2*__BITS4 : 3*__BITS4); \
+ __a = __xr < ((u32)1<<2*__BITS4) \
+ ? (__xr < ((u32)1<<__BITS4) ? 0 : __BITS4) \
+ : (__xr < ((u32)1<<3*__BITS4) ? 2*__BITS4 : 3*__BITS4); \
} \
else \
{ \
diff --git a/arch/arm/lib/lshrdi3.c b/arch/arm/lib/lshrdi3.c
index b666f1bad451047adcdf348ab2fd105d482b496f..3681f49d2b6e24c43c3d4b1670e57f2f50ebb1dd 100644
--- a/arch/arm/lib/lshrdi3.c
+++ b/arch/arm/lib/lshrdi3.c
@@ -31,31 +31,26 @@ Boston, MA 02111-1307, USA. */
#include "gcclib.h"
-DItype
-__lshrdi3 (DItype u, word_type b)
+s64 __lshrdi3(s64 u, int b)
{
- DIunion w;
- word_type bm;
- DIunion uu;
-
- if (b == 0)
- return u;
-
- uu.ll = u;
-
- bm = (sizeof (SItype) * BITS_PER_UNIT) - b;
- if (bm <= 0)
- {
- w.s.high = 0;
- w.s.low = (USItype)uu.s.high >> -bm;
- }
- else
- {
- USItype carries = (USItype)uu.s.high << bm;
- w.s.high = (USItype)uu.s.high >> b;
- w.s.low = ((USItype)uu.s.low >> b) | carries;
- }
-
- return w.ll;
+ DIunion w;
+ int bm;
+ DIunion uu;
+
+ if (b == 0)
+ return u;
+
+ uu.ll = u;
+
+ bm = (sizeof(s32) * BITS_PER_UNIT) - b;
+ if (bm <= 0) {
+ w.s.high = 0;
+ w.s.low = (u32) uu.s.high >> -bm;
+ } else {
+ u32 carries = (u32) uu.s.high << bm;
+ w.s.high = (u32) uu.s.high >> b;
+ w.s.low = ((u32) uu.s.low >> b) | carries;
+ }
+
+ return w.ll;
}
-
diff --git a/arch/arm/lib/muldi3.c b/arch/arm/lib/muldi3.c
index 44d611b1cfdbda4fcfdd5b17d0586109b249bb4a..0a3b93313f1831b24ef778f595a9d9bca0571a93 100644
--- a/arch/arm/lib/muldi3.c
+++ b/arch/arm/lib/muldi3.c
@@ -32,7 +32,7 @@ Boston, MA 02111-1307, USA. */
#include "gcclib.h"
#define umul_ppmm(xh, xl, a, b) \
-{register USItype __t0, __t1, __t2; \
+{register u32 __t0, __t1, __t2; \
__asm__ ("%@ Inlined umul_ppmm \n\
mov %2, %5, lsr #16 \n\
mov %0, %6, lsr #16 \n\
@@ -46,32 +46,27 @@ Boston, MA 02111-1307, USA. */
addcs %0, %0, #65536 \n\
adds %1, %1, %3, lsl #16 \n\
adc %0, %0, %3, lsr #16" \
- : "=&r" ((USItype) (xh)), \
- "=r" ((USItype) (xl)), \
+ : "=&r" ((u32) (xh)), \
+ "=r" ((u32) (xl)), \
"=&r" (__t0), "=&r" (__t1), "=r" (__t2) \
- : "r" ((USItype) (a)), \
- "r" ((USItype) (b)));}
-
+ : "r" ((u32) (a)), \
+ "r" ((u32) (b)));}
#define __umulsidi3(u, v) \
({DIunion __w; \
umul_ppmm (__w.s.high, __w.s.low, u, v); \
__w.ll; })
-
-DItype
-__muldi3 (DItype u, DItype v)
+s64 __muldi3(s64 u, s64 v)
{
- DIunion w;
- DIunion uu, vv;
+ DIunion w;
+ DIunion uu, vv;
- uu.ll = u,
- vv.ll = v;
+ uu.ll = u, vv.ll = v;
- w.ll = __umulsidi3 (uu.s.low, vv.s.low);
- w.s.high += ((USItype) uu.s.low * (USItype) vv.s.high
- + (USItype) uu.s.high * (USItype) vv.s.low);
+ w.ll = __umulsidi3(uu.s.low, vv.s.low);
+ w.s.high += ((u32) uu.s.low * (u32) vv.s.high
+ + (u32) uu.s.high * (u32) vv.s.low);
- return w.ll;
+ return w.ll;
}
-
diff --git a/arch/arm/lib/ucmpdi2.c b/arch/arm/lib/ucmpdi2.c
index 6c6ae63efa0254cb75476231d83cffc0ad34d7ef..57f3f2df3850147286d89f870912cf40486d2d66 100644
--- a/arch/arm/lib/ucmpdi2.c
+++ b/arch/arm/lib/ucmpdi2.c
@@ -31,21 +31,19 @@ Boston, MA 02111-1307, USA. */
#include "gcclib.h"
-word_type
-__ucmpdi2 (DItype a, DItype b)
+int __ucmpdi2(s64 a, s64 b)
{
- DIunion au, bu;
-
- au.ll = a, bu.ll = b;
-
- if ((USItype) au.s.high < (USItype) bu.s.high)
- return 0;
- else if ((USItype) au.s.high > (USItype) bu.s.high)
- return 2;
- if ((USItype) au.s.low < (USItype) bu.s.low)
- return 0;
- else if ((USItype) au.s.low > (USItype) bu.s.low)
- return 2;
- return 1;
+ DIunion au, bu;
+
+ au.ll = a, bu.ll = b;
+
+ if ((u32) au.s.high < (u32) bu.s.high)
+ return 0;
+ else if ((u32) au.s.high > (u32) bu.s.high)
+ return 2;
+ if ((u32) au.s.low < (u32) bu.s.low)
+ return 0;
+ else if ((u32) au.s.low > (u32) bu.s.low)
+ return 2;
+ return 1;
}
-
diff --git a/arch/arm/lib/udivdi3.c b/arch/arm/lib/udivdi3.c
index d25195f673f465074a96cbb1ec30f1af6f65d1b3..e343be4c66421c9b6d2524f11e7858b02db369f9 100644
--- a/arch/arm/lib/udivdi3.c
+++ b/arch/arm/lib/udivdi3.c
@@ -32,211 +32,191 @@ Boston, MA 02111-1307, USA. */
#include "gcclib.h"
#include "longlong.h"
-static const UQItype __clz_tab[] =
-{
- 0,1,2,2,3,3,3,3,4,4,4,4,4,4,4,4,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,5,
- 6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,6,
- 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
- 7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,7,
- 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
- 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
- 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
- 8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,8,
+static const u8 __clz_tab[] = {
+ 0, 1, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 4, 4, 4, 4, 5, 5, 5, 5, 5, 5, 5, 5,
+ 5, 5, 5, 5, 5, 5, 5, 5,
+ 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6, 6,
+ 6, 6, 6, 6, 6, 6, 6, 6,
+ 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+ 7, 7, 7, 7, 7, 7, 7, 7,
+ 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7, 7,
+ 7, 7, 7, 7, 7, 7, 7, 7,
+ 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8, 8,
+ 8, 8, 8, 8, 8, 8, 8, 8,
};
-UDItype
-__udivmoddi4 (UDItype n, UDItype d, UDItype *rp)
+u64 __udivmoddi4(u64 n, u64 d, u64 * rp)
{
- DIunion ww;
- DIunion nn, dd;
- DIunion rr;
- USItype d0, d1, n0, n1, n2;
- USItype q0, q1;
- USItype b, bm;
-
- nn.ll = n;
- dd.ll = d;
-
- d0 = dd.s.low;
- d1 = dd.s.high;
- n0 = nn.s.low;
- n1 = nn.s.high;
-
- if (d1 == 0)
- {
- if (d0 > n1)
- {
- /* 0q = nn / 0D */
-
- count_leading_zeros (bm, d0);
-
- if (bm != 0)
- {
- /* Normalize, i.e. make the most significant bit of the
- denominator set. */
-
- d0 = d0 << bm;
- n1 = (n1 << bm) | (n0 >> (SI_TYPE_SIZE - bm));
- n0 = n0 << bm;
- }
-
- udiv_qrnnd (q0, n0, n1, n0, d0);
- q1 = 0;
-
- /* Remainder in n0 >> bm. */
- }
- else
- {
- /* qq = NN / 0d */
-
- if (d0 == 0)
- d0 = 1 / d0; /* Divide intentionally by zero. */
-
- count_leading_zeros (bm, d0);
-
- if (bm == 0)
- {
- /* From (n1 >= d0) /\ (the most significant bit of d0 is set),
- conclude (the most significant bit of n1 is set) /\ (the
- leading quotient digit q1 = 1).
-
- This special case is necessary, not an optimization.
- (Shifts counts of SI_TYPE_SIZE are undefined.) */
-
- n1 -= d0;
- q1 = 1;
- }
- else
- {
- /* Normalize. */
-
- b = SI_TYPE_SIZE - bm;
-
- d0 = d0 << bm;
- n2 = n1 >> b;
- n1 = (n1 << bm) | (n0 >> b);
- n0 = n0 << bm;
-
- udiv_qrnnd (q1, n1, n2, n1, d0);
- }
-
- /* n1 != d0... */
-
- udiv_qrnnd (q0, n0, n1, n0, d0);
-
- /* Remainder in n0 >> bm. */
- }
-
- if (rp != 0)
- {
- rr.s.low = n0 >> bm;
- rr.s.high = 0;
- *rp = rr.ll;
- }
- }
- else
- {
- if (d1 > n1)
- {
- /* 00 = nn / DD */
-
- q0 = 0;
- q1 = 0;
-
- /* Remainder in n1n0. */
- if (rp != 0)
- {
- rr.s.low = n0;
- rr.s.high = n1;
- *rp = rr.ll;
- }
- }
- else
- {
- /* 0q = NN / dd */
-
- count_leading_zeros (bm, d1);
- if (bm == 0)
- {
- /* From (n1 >= d1) /\ (the most significant bit of d1 is set),
- conclude (the most significant bit of n1 is set) /\ (the
- quotient digit q0 = 0 or 1).
-
- This special case is necessary, not an optimization. */
-
- /* The condition on the next line takes advantage of that
- n1 >= d1 (true due to program flow). */
- if (n1 > d1 || n0 >= d0)
- {
- q0 = 1;
- sub_ddmmss (n1, n0, n1, n0, d1, d0);
- }
- else
- q0 = 0;
-
- q1 = 0;
-
- if (rp != 0)
- {
- rr.s.low = n0;
- rr.s.high = n1;
- *rp = rr.ll;
- }
- }
- else
- {
- USItype m1, m0;
- /* Normalize. */
-
- b = SI_TYPE_SIZE - bm;
-
- d1 = (d1 << bm) | (d0 >> b);
- d0 = d0 << bm;
- n2 = n1 >> b;
- n1 = (n1 << bm) | (n0 >> b);
- n0 = n0 << bm;
-
- udiv_qrnnd (q0, n1, n2, n1, d1);
- umul_ppmm (m1, m0, q0, d0);
-
- if (m1 > n1 || (m1 == n1 && m0 > n0))
- {
- q0--;
- sub_ddmmss (m1, m0, m1, m0, d1, d0);
- }
-
- q1 = 0;
-
- /* Remainder in (n1n0 - m1m0) >> bm. */
- if (rp != 0)
- {
- sub_ddmmss (n1, n0, n1, n0, m1, m0);
- rr.s.low = (n1 << b) | (n0 >> bm);
- rr.s.high = n1 >> bm;
- *rp = rr.ll;
- }
- }
- }
- }
-
- ww.s.low = q0;
- ww.s.high = q1;
- return ww.ll;
+ DIunion ww;
+ DIunion nn, dd;
+ DIunion rr;
+ u32 d0, d1, n0, n1, n2;
+ u32 q0, q1;
+ u32 b, bm;
+
+ nn.ll = n;
+ dd.ll = d;
+
+ d0 = dd.s.low;
+ d1 = dd.s.high;
+ n0 = nn.s.low;
+ n1 = nn.s.high;
+
+ if (d1 == 0) {
+ if (d0 > n1) {
+ /* 0q = nn / 0D */
+
+ count_leading_zeros(bm, d0);
+
+ if (bm != 0) {
+ /* Normalize, i.e. make the most significant bit of the
+ denominator set. */
+
+ d0 = d0 << bm;
+ n1 = (n1 << bm) | (n0 >> (SI_TYPE_SIZE - bm));
+ n0 = n0 << bm;
+ }
+
+ udiv_qrnnd(q0, n0, n1, n0, d0);
+ q1 = 0;
+
+ /* Remainder in n0 >> bm. */
+ } else {
+ /* qq = NN / 0d */
+
+ if (d0 == 0)
+ d0 = 1 / d0; /* Divide intentionally by zero. */
+
+ count_leading_zeros(bm, d0);
+
+ if (bm == 0) {
+ /* From (n1 >= d0) /\ (the most significant bit of d0 is set),
+ conclude (the most significant bit of n1 is set) /\ (the
+ leading quotient digit q1 = 1).
+
+ This special case is necessary, not an optimization.
+ (Shifts counts of SI_TYPE_SIZE are undefined.) */
+
+ n1 -= d0;
+ q1 = 1;
+ } else {
+ /* Normalize. */
+
+ b = SI_TYPE_SIZE - bm;
+
+ d0 = d0 << bm;
+ n2 = n1 >> b;
+ n1 = (n1 << bm) | (n0 >> b);
+ n0 = n0 << bm;
+
+ udiv_qrnnd(q1, n1, n2, n1, d0);
+ }
+
+ /* n1 != d0... */
+
+ udiv_qrnnd(q0, n0, n1, n0, d0);
+
+ /* Remainder in n0 >> bm. */
+ }
+
+ if (rp != 0) {
+ rr.s.low = n0 >> bm;
+ rr.s.high = 0;
+ *rp = rr.ll;
+ }
+ } else {
+ if (d1 > n1) {
+ /* 00 = nn / DD */
+
+ q0 = 0;
+ q1 = 0;
+
+ /* Remainder in n1n0. */
+ if (rp != 0) {
+ rr.s.low = n0;
+ rr.s.high = n1;
+ *rp = rr.ll;
+ }
+ } else {
+ /* 0q = NN / dd */
+
+ count_leading_zeros(bm, d1);
+ if (bm == 0) {
+ /* From (n1 >= d1) /\ (the most significant bit of d1 is set),
+ conclude (the most significant bit of n1 is set) /\ (the
+ quotient digit q0 = 0 or 1).
+
+ This special case is necessary, not an optimization. */
+
+ /* The condition on the next line takes advantage of that
+ n1 >= d1 (true due to program flow). */
+ if (n1 > d1 || n0 >= d0) {
+ q0 = 1;
+ sub_ddmmss(n1, n0, n1, n0, d1, d0);
+ } else
+ q0 = 0;
+
+ q1 = 0;
+
+ if (rp != 0) {
+ rr.s.low = n0;
+ rr.s.high = n1;
+ *rp = rr.ll;
+ }
+ } else {
+ u32 m1, m0;
+ /* Normalize. */
+
+ b = SI_TYPE_SIZE - bm;
+
+ d1 = (d1 << bm) | (d0 >> b);
+ d0 = d0 << bm;
+ n2 = n1 >> b;
+ n1 = (n1 << bm) | (n0 >> b);
+ n0 = n0 << bm;
+
+ udiv_qrnnd(q0, n1, n2, n1, d1);
+ umul_ppmm(m1, m0, q0, d0);
+
+ if (m1 > n1 || (m1 == n1 && m0 > n0)) {
+ q0--;
+ sub_ddmmss(m1, m0, m1, m0, d1, d0);
+ }
+
+ q1 = 0;
+
+ /* Remainder in (n1n0 - m1m0) >> bm. */
+ if (rp != 0) {
+ sub_ddmmss(n1, n0, n1, n0, m1, m0);
+ rr.s.low = (n1 << b) | (n0 >> bm);
+ rr.s.high = n1 >> bm;
+ *rp = rr.ll;
+ }
+ }
+ }
+ }
+
+ ww.s.low = q0;
+ ww.s.high = q1;
+ return ww.ll;
}
-UDItype
-__udivdi3 (UDItype n, UDItype d)
+u64 __udivdi3(u64 n, u64 d)
{
- return __udivmoddi4 (n, d, (UDItype *) 0);
+ return __udivmoddi4(n, d, (u64 *) 0);
}
-UDItype
-__umoddi3 (UDItype u, UDItype v)
+u64 __umoddi3(u64 u, u64 v)
{
- UDItype w;
+ u64 w;
- (void) __udivmoddi4 (u ,v, &w);
+ (void)__udivmoddi4(u, v, &w);
- return w;
+ return w;
}
-
diff --git a/arch/arm/mach-aaec2000/Kconfig b/arch/arm/mach-aaec2000/Kconfig
new file mode 100644
index 0000000000000000000000000000000000000000..5e4bef93754cc1af5e13117753b2e0fe54cebe5b
--- /dev/null
+++ b/arch/arm/mach-aaec2000/Kconfig
@@ -0,0 +1,11 @@
+if ARCH_AAEC2000
+
+menu "Agilent AAEC-2000 Implementations"
+
+config MACH_AAED2000
+ bool "Agilent AAED-2000 Development Platform"
+ select CPU_ARM920T
+
+endmenu
+
+endif
diff --git a/arch/arm/mach-aaec2000/Makefile b/arch/arm/mach-aaec2000/Makefile
new file mode 100644
index 0000000000000000000000000000000000000000..20ec83896c375992bfcae3c00c6b3952ae975643
--- /dev/null
+++ b/arch/arm/mach-aaec2000/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the linux kernel.
+#
+
+# Common support (must be linked before board specific support)
+obj-y += core.o
+
+# Specific board support
+obj-$(CONFIG_MACH_AAED2000) += aaed2000.o
diff --git a/arch/arm/mach-aaec2000/aaed2000.c b/arch/arm/mach-aaec2000/aaed2000.c
new file mode 100644
index 0000000000000000000000000000000000000000..5417ca3f462160b9938d14768fc68f2a20ad90de
--- /dev/null
+++ b/arch/arm/mach-aaec2000/aaed2000.c
@@ -0,0 +1,48 @@
+/*
+ * linux/arch/arm/mach-aaec2000/aaed2000.c
+ *
+ * Support for the Agilent AAED-2000 Development Platform.
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+#include
+
+#include "core.h"
+
+static void __init aaed2000_init_irq(void)
+{
+ aaec2000_init_irq();
+}
+
+static void __init aaed2000_map_io(void)
+{
+ aaec2000_map_io();
+}
+
+MACHINE_START(AAED2000, "Agilent AAED-2000 Development Platform")
+ MAINTAINER("Nicolas Bellido Y Ortega")
+ BOOT_MEM(0xf0000000, PIO_BASE, VIO_BASE)
+ MAPIO(aaed2000_map_io)
+ INITIRQ(aaed2000_init_irq)
+ .timer = &aaec2000_timer,
+MACHINE_END
diff --git a/arch/arm/mach-aaec2000/core.c b/arch/arm/mach-aaec2000/core.c
new file mode 100644
index 0000000000000000000000000000000000000000..fc145b3768fab5a4431f59ec45ac57536456c420
--- /dev/null
+++ b/arch/arm/mach-aaec2000/core.c
@@ -0,0 +1,157 @@
+/*
+ * linux/arch/arm/mach-aaec2000/core.c
+ *
+ * Code common to all AAEC-2000 machines
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+
+#include
+#include
+#include
+
+/*
+ * Common I/O mapping:
+ *
+ * Static virtual address mappings are as follow:
+ *
+ * 0xf8000000-0xf8001ffff: Devices connected to APB bus
+ * 0xf8002000-0xf8003ffff: Devices connected to AHB bus
+ *
+ * Below 0xe8000000 is reserved for vm allocation.
+ *
+ * The machine specific code must provide the extra mapping beside the
+ * default mapping provided here.
+ */
+static struct map_desc standard_io_desc[] __initdata = {
+ /* virtual physical length type */
+ { VIO_APB_BASE, PIO_APB_BASE, IO_APB_LENGTH, MT_DEVICE },
+ { VIO_AHB_BASE, PIO_AHB_BASE, IO_AHB_LENGTH, MT_DEVICE }
+};
+
+void __init aaec2000_map_io(void)
+{
+ iotable_init(standard_io_desc, ARRAY_SIZE(standard_io_desc));
+}
+
+/*
+ * Interrupt handling routines
+ */
+static void aaec2000_int_ack(unsigned int irq)
+{
+ IRQ_INTSR = 1 << irq;
+}
+
+static void aaec2000_int_mask(unsigned int irq)
+{
+ IRQ_INTENC |= (1 << irq);
+}
+
+static void aaec2000_int_unmask(unsigned int irq)
+{
+ IRQ_INTENS |= (1 << irq);
+}
+
+static struct irqchip aaec2000_irq_chip = {
+ .ack = aaec2000_int_ack,
+ .mask = aaec2000_int_mask,
+ .unmask = aaec2000_int_unmask,
+};
+
+void __init aaec2000_init_irq(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < NR_IRQS; i++) {
+ set_irq_handler(i, do_level_IRQ);
+ set_irq_chip(i, &aaec2000_irq_chip);
+ set_irq_flags(i, IRQF_VALID);
+ }
+
+ /* Disable all interrupts */
+ IRQ_INTENC = 0xffffffff;
+
+ /* Clear any pending interrupts */
+ IRQ_INTSR = IRQ_INTSR;
+}
+
+/*
+ * Time keeping
+ */
+/* IRQs are disabled before entering here from do_gettimeofday() */
+static unsigned long aaec2000_gettimeoffset(void)
+{
+ unsigned long ticks_to_match, elapsed, usec;
+
+ /* Get ticks before next timer match */
+ ticks_to_match = TIMER1_LOAD - TIMER1_VAL;
+
+ /* We need elapsed ticks since last match */
+ elapsed = LATCH - ticks_to_match;
+
+ /* Now, convert them to usec */
+ usec = (unsigned long)(elapsed * (tick_nsec / 1000))/LATCH;
+
+ return usec;
+}
+
+/* We enter here with IRQs enabled */
+static irqreturn_t
+aaec2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ /* TODO: Check timer accuracy */
+ write_seqlock(&xtime_lock);
+
+ timer_tick(regs);
+ TIMER1_CLEAR = 1;
+
+ write_sequnlock(&xtime_lock);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction aaec2000_timer_irq = {
+ .name = "AAEC-2000 Timer Tick",
+ .flags = SA_INTERRUPT,
+ .handler = aaec2000_timer_interrupt
+};
+
+static void __init aaec2000_timer_init(void)
+{
+ /* Disable timer 1 */
+ TIMER1_CTRL = 0;
+
+ /* We have somehow to generate a 100Hz clock.
+ * We then use the 508KHz timer in periodic mode.
+ */
+ TIMER1_LOAD = LATCH;
+ TIMER1_CLEAR = 1; /* Clear interrupt */
+
+ setup_irq(INT_TMR1_OFL, &aaec2000_timer_irq);
+
+ TIMER1_CTRL = TIMER_CTRL_ENABLE |
+ TIMER_CTRL_PERIODIC |
+ TIMER_CTRL_CLKSEL_508K;
+}
+
+struct sys_timer aaec2000_timer = {
+ .init = aaec2000_timer_init,
+ .offset = aaec2000_gettimeoffset,
+};
+
diff --git a/arch/arm/mach-aaec2000/core.h b/arch/arm/mach-aaec2000/core.h
new file mode 100644
index 0000000000000000000000000000000000000000..91893d848c165e67ff16079e9dbac8d4c626f4bf
--- /dev/null
+++ b/arch/arm/mach-aaec2000/core.h
@@ -0,0 +1,16 @@
+/*
+ * linux/arch/arm/mach-aaec2000/core.h
+ *
+ * Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+struct sys_timer;
+
+extern struct sys_timer aaec2000_timer;
+extern void __init aaec2000_map_io(void);
+extern void __init aaec2000_init_irq(void);
diff --git a/arch/arm/mach-clps7500/core.c b/arch/arm/mach-clps7500/core.c
index fdfededfd96f9d5918f184821cb750c64f97014b..0bc7da488612ade33be256f5b0ee973b5f49ca29 100644
--- a/arch/arm/mach-clps7500/core.c
+++ b/arch/arm/mach-clps7500/core.c
@@ -26,6 +26,8 @@
#include
#include
+unsigned int vram_size;
+
static void cl7500_ack_irq_a(unsigned int irq)
{
unsigned int val, mask;
diff --git a/arch/arm/mach-integrator/Makefile b/arch/arm/mach-integrator/Makefile
index 158daaf9e3b03ec1eb8a53aba1b2c73bc57776ec..ebb255bdce8aa7ed6c85f25b95a639e30b6e551c 100644
--- a/arch/arm/mach-integrator/Makefile
+++ b/arch/arm/mach-integrator/Makefile
@@ -12,3 +12,4 @@ obj-$(CONFIG_LEDS) += leds.o
obj-$(CONFIG_PCI) += pci_v3.o pci.o
obj-$(CONFIG_CPU_FREQ_INTEGRATOR) += cpu.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += impd1.o
+obj-$(CONFIG_SMP) += platsmp.o headsmp.o
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index bd17b5154311f4a1a8540f0dc105ba9996eec862..bd1e5e3c9d34b2e055f6d12763e2735b3994daf4 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -14,6 +14,7 @@
#include
#include
#include
+#include
#include
#include
@@ -221,7 +222,23 @@ integrator_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
*/
timer1->TimerClear = 1;
- timer_tick(regs);
+ /*
+ * the clock tick routines are only processed on the
+ * primary CPU
+ */
+ if (hard_smp_processor_id() == 0) {
+ timer_tick(regs);
+#ifdef CONFIG_SMP
+ smp_send_timer();
+#endif
+ }
+
+#ifdef CONFIG_SMP
+ /*
+ * this is the ARM equivalent of the APIC timer interrupt
+ */
+ update_process_times(user_mode(regs));
+#endif /* CONFIG_SMP */
write_sequnlock(&xtime_lock);
diff --git a/arch/arm/mach-integrator/headsmp.S b/arch/arm/mach-integrator/headsmp.S
new file mode 100644
index 0000000000000000000000000000000000000000..ceaa88e30d708e2aa090f44258de6e95e67a6aac
--- /dev/null
+++ b/arch/arm/mach-integrator/headsmp.S
@@ -0,0 +1,37 @@
+/*
+ * linux/arch/arm/mach-integrator/headsmp.S
+ *
+ * Copyright (c) 2003 ARM Limited
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include
+#include
+
+ __INIT
+
+/*
+ * Integrator specific entry point for secondary CPUs. This provides
+ * a "holding pen" into which all secondary cores are held until we're
+ * ready for them to initialise.
+ */
+ENTRY(integrator_secondary_startup)
+ adr r4, 1f
+ ldmia r4, {r5, r6}
+ sub r4, r4, r5
+ ldr r6, [r6, r4]
+pen: ldr r7, [r6]
+ cmp r7, r0
+ bne pen
+
+ /*
+ * we've been released from the holding pen: secondary_stack
+ * should now contain the SVC stack for this core
+ */
+ b secondary_startup
+
+1: .long .
+ .long phys_pen_release
diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c
index 3b948e8c27513f7896263a87a99123ad5394b860..e0a01eef099345efc0dd202b443867db6312cef1 100644
--- a/arch/arm/mach-integrator/integrator_cp.c
+++ b/arch/arm/mach-integrator/integrator_cp.c
@@ -83,7 +83,6 @@ static struct map_desc intcp_io_desc[] __initdata = {
{ IO_ADDRESS(INTEGRATOR_UART1_BASE), INTEGRATOR_UART1_BASE, SZ_4K, MT_DEVICE },
{ IO_ADDRESS(INTEGRATOR_DBG_BASE), INTEGRATOR_DBG_BASE, SZ_4K, MT_DEVICE },
{ IO_ADDRESS(INTEGRATOR_GPIO_BASE), INTEGRATOR_GPIO_BASE, SZ_4K, MT_DEVICE },
- { 0xfc900000, 0xc9000000, SZ_4K, MT_DEVICE },
{ 0xfca00000, 0xca000000, SZ_4K, MT_DEVICE },
{ 0xfcb00000, 0xcb000000, SZ_4K, MT_DEVICE },
};
diff --git a/arch/arm/mach-integrator/leds.c b/arch/arm/mach-integrator/leds.c
index d2c0ab21150c1cbedd3397d4b3b9854b258f2aaf..f1436e683b493f380b73814e433f5460ac1bea0f 100644
--- a/arch/arm/mach-integrator/leds.c
+++ b/arch/arm/mach-integrator/leds.c
@@ -22,6 +22,8 @@
*/
#include
#include
+#include
+#include
#include
#include
@@ -85,4 +87,4 @@ static int __init leds_init(void)
return 0;
}
-__initcall(leds_init);
+core_initcall(leds_init);
diff --git a/arch/arm/mach-integrator/platsmp.c b/arch/arm/mach-integrator/platsmp.c
new file mode 100644
index 0000000000000000000000000000000000000000..ead15dfcb53d143f587ff6aaeab52e07acfcd708
--- /dev/null
+++ b/arch/arm/mach-integrator/platsmp.c
@@ -0,0 +1,192 @@
+/*
+ * linux/arch/arm/mach-cintegrator/platsmp.c
+ *
+ * Copyright (C) 2002 ARM Ltd.
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+#include
+#include
+#include
+#include
+
+extern void integrator_secondary_startup(void);
+
+/*
+ * control for which core is the next to come out of the secondary
+ * boot "holding pen"
+ */
+volatile int __initdata pen_release = -1;
+unsigned long __initdata phys_pen_release = 0;
+
+static DEFINE_SPINLOCK(boot_lock);
+
+void __init platform_secondary_init(unsigned int cpu)
+{
+ /*
+ * the primary core may have used a "cross call" soft interrupt
+ * to get this processor out of WFI in the BootMonitor - make
+ * sure that we are no longer being sent this soft interrupt
+ */
+ smp_cross_call_done(cpumask_of_cpu(cpu));
+
+ /*
+ * if any interrupts are already enabled for the primary
+ * core (e.g. timer irq), then they will not have been enabled
+ * for us: do so
+ */
+ secondary_scan_irqs();
+
+ /*
+ * let the primary processor know we're out of the
+ * pen, then head off into the C entry point
+ */
+ pen_release = -1;
+
+ /*
+ * Synchronise with the boot thread.
+ */
+ spin_lock(&boot_lock);
+ spin_unlock(&boot_lock);
+}
+
+int __init boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ unsigned long timeout;
+
+ /*
+ * set synchronisation state between this boot processor
+ * and the secondary one
+ */
+ spin_lock(&boot_lock);
+
+ /*
+ * The secondary processor is waiting to be released from
+ * the holding pen - release it, then wait for it to flag
+ * that it has been released by resetting pen_release.
+ *
+ * Note that "pen_release" is the hardware CPU ID, whereas
+ * "cpu" is Linux's internal ID.
+ */
+ pen_release = cpu;
+
+ /*
+ * XXX
+ *
+ * This is a later addition to the booting protocol: the
+ * bootMonitor now puts secondary cores into WFI, so
+ * poke_milo() no longer gets the cores moving; we need
+ * to send a soft interrupt to wake the secondary core.
+ * Use smp_cross_call() for this, since there's little
+ * point duplicating the code here
+ */
+ smp_cross_call(cpumask_of_cpu(cpu));
+
+ timeout = jiffies + (1 * HZ);
+ while (time_before(jiffies, timeout)) {
+ if (pen_release == -1)
+ break;
+
+ udelay(10);
+ }
+
+ /*
+ * now the secondary core is starting up let it run its
+ * calibrations, then wait for it to finish
+ */
+ spin_unlock(&boot_lock);
+
+ return pen_release != -1 ? -ENOSYS : 0;
+}
+
+static void __init poke_milo(void)
+{
+ extern void secondary_startup(void);
+
+ /* nobody is to be released from the pen yet */
+ pen_release = -1;
+
+ phys_pen_release = virt_to_phys(&pen_release);
+
+ /*
+ * write the address of secondary startup into the system-wide
+ * flags register, then clear the bottom two bits, which is what
+ * BootMonitor is waiting for
+ */
+#if 1
+#define CINTEGRATOR_HDR_FLAGSS_OFFSET 0x30
+ __raw_writel(virt_to_phys(integrator_secondary_startup),
+ (IO_ADDRESS(INTEGRATOR_HDR_BASE) +
+ CINTEGRATOR_HDR_FLAGSS_OFFSET));
+#define CINTEGRATOR_HDR_FLAGSC_OFFSET 0x34
+ __raw_writel(3,
+ (IO_ADDRESS(INTEGRATOR_HDR_BASE) +
+ CINTEGRATOR_HDR_FLAGSC_OFFSET));
+#endif
+
+ mb();
+}
+
+void __init smp_prepare_cpus(unsigned int max_cpus)
+{
+ unsigned int ncores = get_core_count();
+ unsigned int cpu = smp_processor_id();
+ int i;
+
+ /* sanity check */
+ if (ncores == 0) {
+ printk(KERN_ERR
+ "Integrator/CP: strange CM count of 0? Default to 1\n");
+
+ ncores = 1;
+ }
+
+ if (ncores > NR_CPUS) {
+ printk(KERN_WARNING
+ "Integrator/CP: no. of cores (%d) greater than configured "
+ "maximum of %d - clipping\n",
+ ncores, NR_CPUS);
+ ncores = NR_CPUS;
+ }
+
+ /*
+ * start with some more config for the Boot CPU, now that
+ * the world is a bit more alive (which was not the case
+ * when smp_prepare_boot_cpu() was called)
+ */
+ smp_store_cpu_info(cpu);
+
+ /*
+ * are we trying to boot more cores than exist?
+ */
+ if (max_cpus > ncores)
+ max_cpus = ncores;
+
+ /*
+ * Initialise the present mask - this tells us which CPUs should
+ * be present.
+ */
+ for (i = 0; i < max_cpus; i++) {
+ cpu_set(i, cpu_present_mask);
+ }
+
+ /*
+ * Do we need any more CPUs? If so, then let them know where
+ * to start. Note that, on modern versions of MILO, the "poke"
+ * doesn't actually do anything until each individual core is
+ * sent a soft interrupt to get it out of WFI
+ */
+ if (max_cpus > 1)
+ poke_milo();
+}
diff --git a/arch/arm/mach-ixp2000/core.c b/arch/arm/mach-ixp2000/core.c
index 4f3c3d5c781cae9790bdede88e260853f10d7f90..fc0555596d6d70c82a0c3cefb603efc9e574d2e7 100644
--- a/arch/arm/mach-ixp2000/core.c
+++ b/arch/arm/mach-ixp2000/core.c
@@ -162,12 +162,13 @@ void __init ixp2000_map_io(void)
static unsigned ticks_per_jiffy;
static unsigned ticks_per_usec;
static unsigned next_jiffy_time;
+static volatile unsigned long *missing_jiffy_timer_csr;
unsigned long ixp2000_gettimeoffset (void)
{
unsigned long offset;
- offset = next_jiffy_time - *IXP2000_T4_CSR;
+ offset = next_jiffy_time - *missing_jiffy_timer_csr;
return offset / ticks_per_usec;
}
@@ -179,7 +180,7 @@ static int ixp2000_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
/* clear timer 1 */
ixp2000_reg_write(IXP2000_T1_CLR, 1);
- while ((next_jiffy_time - *IXP2000_T4_CSR) > ticks_per_jiffy) {
+ while ((next_jiffy_time - *missing_jiffy_timer_csr) > ticks_per_jiffy) {
timer_tick(regs);
next_jiffy_time -= ticks_per_jiffy;
}
@@ -197,20 +198,37 @@ static struct irqaction ixp2000_timer_irq = {
void __init ixp2000_init_time(unsigned long tick_rate)
{
- ixp2000_reg_write(IXP2000_T1_CLR, 0);
- ixp2000_reg_write(IXP2000_T4_CLR, 0);
-
ticks_per_jiffy = (tick_rate + HZ/2) / HZ;
ticks_per_usec = tick_rate / 1000000;
+ /*
+ * We use timer 1 as our timer interrupt.
+ */
+ ixp2000_reg_write(IXP2000_T1_CLR, 0);
ixp2000_reg_write(IXP2000_T1_CLD, ticks_per_jiffy - 1);
ixp2000_reg_write(IXP2000_T1_CTL, (1 << 7));
/*
- * We use T4 as a monotonic counter to track missed jiffies
+ * We use a second timer as a monotonic counter for tracking
+ * missed jiffies. The IXP2000 has four timers, but if we're
+ * on an A-step IXP2800, timer 2 and 3 don't work, so on those
+ * chips we use timer 4. Timer 4 is the only timer that can
+ * be used for the watchdog, so we use timer 2 if we're on a
+ * non-buggy chip.
*/
- ixp2000_reg_write(IXP2000_T4_CLD, -1);
- ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7));
+ if ((*IXP2000_PRODUCT_ID & 0x001ffef0) == 0x00000000) {
+ printk(KERN_INFO "Enabling IXP2800 erratum #25 workaround\n");
+
+ ixp2000_reg_write(IXP2000_T4_CLR, 0);
+ ixp2000_reg_write(IXP2000_T4_CLD, -1);
+ ixp2000_reg_write(IXP2000_T4_CTL, (1 << 7));
+ missing_jiffy_timer_csr = IXP2000_T4_CSR;
+ } else {
+ ixp2000_reg_write(IXP2000_T2_CLR, 0);
+ ixp2000_reg_write(IXP2000_T2_CLD, -1);
+ ixp2000_reg_write(IXP2000_T2_CTL, (1 << 7));
+ missing_jiffy_timer_csr = IXP2000_T2_CSR;
+ }
next_jiffy_time = 0xffffffff;
/* register for interrupt */
diff --git a/arch/arm/mach-pxa/lubbock.c b/arch/arm/mach-pxa/lubbock.c
index dd012d6e2f5caecabc6792b3a7cee8e08b7994d3..f2c9e0d2b24b64517efb8c69391603d4ead0c58f 100644
--- a/arch/arm/mach-pxa/lubbock.c
+++ b/arch/arm/mach-pxa/lubbock.c
@@ -15,6 +15,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -106,6 +107,35 @@ static void __init lubbock_init_irq(void)
set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
}
+#ifdef CONFIG_PM
+
+static int lubbock_irq_resume(struct sys_device *dev)
+{
+ LUB_IRQ_MASK_EN = lubbock_irq_enabled;
+ return 0;
+}
+
+static struct sysdev_class lubbock_irq_sysclass = {
+ set_kset_name("cpld_irq"),
+ .resume = lubbock_irq_resume,
+};
+
+static struct sys_device lubbock_irq_device = {
+ .cls = &lubbock_irq_sysclass,
+};
+
+static int __init lubbock_irq_device_init(void)
+{
+ int ret = sysdev_class_register(&lubbock_irq_sysclass);
+ if (ret == 0)
+ ret = sysdev_register(&lubbock_irq_device);
+ return ret;
+}
+
+device_initcall(lubbock_irq_device_init);
+
+#endif
+
static int lubbock_udc_is_connected(void)
{
return (LUB_MISC_RD & (1 << 9)) == 0;
diff --git a/arch/arm/mach-pxa/mainstone.c b/arch/arm/mach-pxa/mainstone.c
index 3f952237ae3ddd185410bb2af9b1a9bf9bb981ad..9896afca751fc580bb6692a946d014919713a1c4 100644
--- a/arch/arm/mach-pxa/mainstone.c
+++ b/arch/arm/mach-pxa/mainstone.c
@@ -15,6 +15,7 @@
#include
#include
+#include
#include
#include
#include
@@ -62,7 +63,6 @@ static struct irqchip mainstone_irq_chip = {
.unmask = mainstone_unmask_irq,
};
-
static void mainstone_irq_handler(unsigned int irq, struct irqdesc *desc,
struct pt_regs *regs)
{
@@ -100,6 +100,35 @@ static void __init mainstone_init_irq(void)
set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
}
+#ifdef CONFIG_PM
+
+static int mainstone_irq_resume(struct sys_device *dev)
+{
+ MST_INTMSKENA = mainstone_irq_enabled;
+ return 0;
+}
+
+static struct sysdev_class mainstone_irq_sysclass = {
+ set_kset_name("cpld_irq"),
+ .resume = mainstone_irq_resume,
+};
+
+static struct sys_device mainstone_irq_device = {
+ .cls = &mainstone_irq_sysclass,
+};
+
+static int __init mainstone_irq_device_init(void)
+{
+ int ret = sysdev_class_register(&mainstone_irq_sysclass);
+ if (ret == 0)
+ ret = sysdev_register(&mainstone_irq_device);
+ return ret;
+}
+
+device_initcall(mainstone_irq_device_init);
+
+#endif
+
static struct resource smc91x_resources[] = {
[0] = {
@@ -304,6 +333,15 @@ static void __init mainstone_map_io(void)
PWER = 0xC0000002;
PRER = 0x00000002;
PFER = 0x00000002;
+ /* for use I SRAM as framebuffer. */
+ PSLR |= 0xF04;
+ PCFR = 0x66;
+ /* For Keypad wakeup. */
+ KPC &=~KPC_ASACT;
+ KPC |=KPC_AS;
+ PKWR = 0x000FD000;
+ /* Need read PKWR back after set it. */
+ PKWR;
}
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
diff --git a/arch/arm/mach-pxa/pm.c b/arch/arm/mach-pxa/pm.c
index 82a4bf34c251c338cc735679a559eef2ecf4e46e..ac4dd4336160bc2d202f7059e639d83836f52bda 100644
--- a/arch/arm/mach-pxa/pm.c
+++ b/arch/arm/mach-pxa/pm.c
@@ -29,9 +29,6 @@
*/
#undef DEBUG
-extern void pxa_cpu_suspend(void);
-extern void pxa_cpu_resume(void);
-
#define SAVE(x) sleep_save[SLEEP_SAVE_##x] = x
#define RESTORE(x) x = sleep_save[SLEEP_SAVE_##x]
@@ -63,6 +60,12 @@ enum { SLEEP_SAVE_START = 0,
SLEEP_SAVE_ICMR,
SLEEP_SAVE_CKEN,
+#ifdef CONFIG_PXA27x
+ SLEEP_SAVE_MDREFR,
+ SLEEP_SAVE_PWER, SLEEP_SAVE_PCFR, SLEEP_SAVE_PRER,
+ SLEEP_SAVE_PFER, SLEEP_SAVE_PKWR,
+#endif
+
SLEEP_SAVE_CKSUM,
SLEEP_SAVE_SIZE
@@ -75,9 +78,7 @@ static int pxa_pm_enter(suspend_state_t state)
unsigned long checksum = 0;
struct timespec delta, rtc;
int i;
-
- if (state != PM_SUSPEND_MEM)
- return -EINVAL;
+ extern void pxa_cpu_pm_enter(suspend_state_t state);
#ifdef CONFIG_IWMMXT
/* force any iWMMXt context to ram **/
@@ -100,16 +101,17 @@ static int pxa_pm_enter(suspend_state_t state)
SAVE(GAFR2_L); SAVE(GAFR2_U);
#ifdef CONFIG_PXA27x
+ SAVE(MDREFR);
SAVE(GPLR3); SAVE(GPDR3); SAVE(GRER3); SAVE(GFER3); SAVE(PGSR3);
SAVE(GAFR3_L); SAVE(GAFR3_U);
+ SAVE(PWER); SAVE(PCFR); SAVE(PRER);
+ SAVE(PFER); SAVE(PKWR);
#endif
SAVE(ICMR);
ICMR = 0;
SAVE(CKEN);
- CKEN = 0;
-
SAVE(PSTR);
/* Note: wake up source are set up in each machine specific files */
@@ -123,16 +125,15 @@ static int pxa_pm_enter(suspend_state_t state)
/* Clear sleep reset status */
RCSR = RCSR_SMR;
- /* set resume return address */
- PSPR = virt_to_phys(pxa_cpu_resume);
-
/* before sleeping, calculate and save a checksum */
for (i = 0; i < SLEEP_SAVE_SIZE - 1; i++)
checksum += sleep_save[i];
sleep_save[SLEEP_SAVE_CKSUM] = checksum;
/* *** go zzz *** */
- pxa_cpu_suspend();
+ pxa_cpu_pm_enter(state);
+
+ cpu_init();
/* after sleeping, validate the checksum */
checksum = 0;
@@ -145,7 +146,7 @@ static int pxa_pm_enter(suspend_state_t state)
LUB_HEXLED = 0xbadbadc5;
#endif
while (1)
- pxa_cpu_suspend();
+ pxa_cpu_pm_enter(state);
}
/* ensure not to come back here if it wasn't intended */
@@ -162,8 +163,11 @@ static int pxa_pm_enter(suspend_state_t state)
RESTORE(PGSR0); RESTORE(PGSR1); RESTORE(PGSR2);
#ifdef CONFIG_PXA27x
+ RESTORE(MDREFR);
RESTORE(GAFR3_L); RESTORE(GAFR3_U); RESTORE_GPLEVEL(3);
RESTORE(GPDR3); RESTORE(GRER3); RESTORE(GFER3); RESTORE(PGSR3);
+ RESTORE(PWER); RESTORE(PCFR); RESTORE(PRER);
+ RESTORE(PFER); RESTORE(PKWR);
#endif
PSSR = PSSR_RDH | PSSR_PH;
@@ -197,7 +201,9 @@ unsigned long sleep_phys_sp(void *sp)
*/
static int pxa_pm_prepare(suspend_state_t state)
{
- return 0;
+ extern int pxa_cpu_pm_prepare(suspend_state_t state);
+
+ return pxa_cpu_pm_prepare(state);
}
/*
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index e887b7175ef33b8c547c04a14d6117deaf19ec49..7869c3b4e62f0447eee5737dc855b0b99afe5d10 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -16,6 +16,7 @@
* initialization stuff for PXA machines which can be overridden later if
* need be.
*/
+#include
#include
#include
#include
@@ -102,3 +103,35 @@ unsigned int get_lcdclk_frequency_10khz(void)
}
EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
+
+#ifdef CONFIG_PM
+
+int pxa_cpu_pm_prepare(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void pxa_cpu_pm_enter(suspend_state_t state)
+{
+ extern void pxa_cpu_suspend(unsigned int);
+ extern void pxa_cpu_resume(void);
+
+ CKEN = 0;
+
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ /* set resume return address */
+ PSPR = virt_to_phys(pxa_cpu_resume);
+ pxa_cpu_suspend(3);
+ break;
+ }
+}
+
+#endif
diff --git a/arch/arm/mach-pxa/pxa27x.c b/arch/arm/mach-pxa/pxa27x.c
index 7e863afefb531e5a9fe6c20d22e6e1355fb3b41d..893964fb9659bbabed5ed818377f430315915ef2 100644
--- a/arch/arm/mach-pxa/pxa27x.c
+++ b/arch/arm/mach-pxa/pxa27x.c
@@ -120,6 +120,42 @@ EXPORT_SYMBOL(get_clk_frequency_khz);
EXPORT_SYMBOL(get_memclk_frequency_10khz);
EXPORT_SYMBOL(get_lcdclk_frequency_10khz);
+#ifdef CONFIG_PM
+
+int pxa_cpu_pm_prepare(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+void pxa_cpu_pm_enter(suspend_state_t state)
+{
+ extern void pxa_cpu_standby(void);
+ extern void pxa_cpu_suspend(unsigned int);
+ extern void pxa_cpu_resume(void);
+
+ CKEN = CKEN22_MEMC | CKEN9_OSTIMER;
+
+ /* ensure voltage-change sequencer not initiated, which hangs */
+ PCFR &= ~PCFR_FVC;
+
+ /* Clear edge-detect status register. */
+ PEDR = 0xDF12FE1B;
+
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ /* set resume return address */
+ PSPR = virt_to_phys(pxa_cpu_resume);
+ pxa_cpu_suspend(3);
+ break;
+ }
+}
+
+#endif
/*
* device registration specific to PXA27x.
diff --git a/arch/arm/mach-rpc/riscpc.c b/arch/arm/mach-rpc/riscpc.c
index 815c53225cd866b3e75e40844b943847888c6767..43710688143650cee3fa3132172e14142e1a7f94 100644
--- a/arch/arm/mach-rpc/riscpc.c
+++ b/arch/arm/mach-rpc/riscpc.c
@@ -32,10 +32,7 @@
extern void rpc_init_irq(void);
-extern unsigned int vram_size;
-
-#if 0
-
+unsigned int vram_size;
unsigned int memc_ctrl_reg;
unsigned int number_mfm_drives;
@@ -63,8 +60,6 @@ static int __init parse_tag_acorn(const struct tag *tag)
__tagtable(ATAG_ACORN, parse_tag_acorn);
-#endif
-
static struct map_desc rpc_io_desc[] __initdata = {
{ SCREEN_BASE, SCREEN_START, 2*1048576, MT_DEVICE }, /* VRAM */
{ (u32)IO_BASE, IO_START, IO_SIZE , MT_DEVICE }, /* IO space */
diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/mach-s3c2410/clock.c
index e23f534d4e1d1696ff7343ad29f1ecad893f9cc1..8d986b8401c2474f3948bb3a4301c26a9784b7f1 100644
--- a/arch/arm/mach-s3c2410/clock.c
+++ b/arch/arm/mach-s3c2410/clock.c
@@ -478,7 +478,7 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
{
unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
- s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate) * 2;
+ s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate);
printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n",
print_mhz(s3c2440_clk_upll.rate));
diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c
index bc229fab86d44644fc4d3d5bc1793035f58ec4f9..c7c28890d406c25356b2643400360cb661ee1586 100644
--- a/arch/arm/mach-s3c2410/dma.c
+++ b/arch/arm/mach-s3c2410/dma.c
@@ -785,6 +785,10 @@ int s3c2410_dma_free(dmach_t channel, s3c2410_dma_client_t *client)
chan->client = NULL;
chan->in_use = 0;
+ if (chan->irq_claimed)
+ free_irq(chan->irq, (void *)chan);
+ chan->irq_claimed = 0;
+
local_irq_restore(flags);
return 0;
diff --git a/arch/arm/mach-s3c2410/s3c2440.c b/arch/arm/mach-s3c2410/s3c2440.c
index 9a8cc5ae225566e5d6d17de94df3fe79dbfe9a2c..d4c8281b55f64a5c3a7a4f2d4fef2c6433215d25 100644
--- a/arch/arm/mach-s3c2410/s3c2440.c
+++ b/arch/arm/mach-s3c2410/s3c2440.c
@@ -192,9 +192,11 @@ void __init s3c2440_map_io(struct map_desc *mach_desc, int size)
iotable_init(s3c2440_iodesc, ARRAY_SIZE(s3c2440_iodesc));
iotable_init(mach_desc, size);
+
/* rename any peripherals used differing from the s3c2410 */
- s3c_device_i2c.name = "s3c2440-i2c";
+ s3c_device_i2c.name = "s3c2440-i2c";
+ s3c_device_nand.name = "s3c2440-nand";
/* change irq for watchdog */
@@ -225,7 +227,7 @@ void __init s3c2440_init_clocks(int xtal)
break;
case S3C2440_CLKDIVN_HDIVN_2:
- hdiv = 1;
+ hdiv = 2;
break;
case S3C2440_CLKDIVN_HDIVN_4_8:
diff --git a/arch/arm/mach-sa1100/Kconfig b/arch/arm/mach-sa1100/Kconfig
index 50cde576dadfc9cf9ebe06917c43e2e054976ed9..6923316b3d0df043f4140648bdbfd58aa0691c7e 100644
--- a/arch/arm/mach-sa1100/Kconfig
+++ b/arch/arm/mach-sa1100/Kconfig
@@ -150,7 +150,7 @@ config SA1100_SSP
config H3600_SLEEVE
tristate "Compaq iPAQ Handheld sleeve support"
- depends on SA1100_H3600
+ depends on SA1100_H3100 || SA1100_H3600
help
Choose this option to enable support for extension packs (sleeves)
for the Compaq iPAQ H3XXX series of handheld computers. This option
diff --git a/arch/arm/mach-sa1100/pm.c b/arch/arm/mach-sa1100/pm.c
index 379ea5e3950f7de6794ef990a91ef89f58352e3c..59c7964cfe11d0a9b68193f5efb369c592ab1a7e 100644
--- a/arch/arm/mach-sa1100/pm.c
+++ b/arch/arm/mach-sa1100/pm.c
@@ -88,6 +88,8 @@ static int sa11x0_pm_enter(suspend_state_t state)
/* go zzz */
sa1100_cpu_suspend();
+ cpu_init();
+
/*
* Ensure not to come back here if it wasn't intended
*/
diff --git a/arch/arm/mach-versatile/Makefile b/arch/arm/mach-versatile/Makefile
index 5d608837757a8247a9cbb11ed781102b8e166b5a..ba81e70ed813ac633ab18fb305cfde4680ed2848 100644
--- a/arch/arm/mach-versatile/Makefile
+++ b/arch/arm/mach-versatile/Makefile
@@ -5,3 +5,4 @@
obj-y := core.o clock.o
obj-$(CONFIG_ARCH_VERSATILE_PB) += versatile_pb.o
obj-$(CONFIG_MACH_VERSATILE_AB) += versatile_ab.o
+obj-$(CONFIG_PCI) += pci.o
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 554e1bd30d6e631ce2959f0ccac136f4d1b325f0..6a7cbea5e098d4acf62a3966217a643656848a3b 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -196,11 +196,15 @@ static struct map_desc versatile_io_desc[] __initdata = {
#ifdef CONFIG_DEBUG_LL
{ IO_ADDRESS(VERSATILE_UART0_BASE), VERSATILE_UART0_BASE, SZ_4K, MT_DEVICE },
#endif
-#ifdef FIXME
- { PCI_MEMORY_VADDR, PHYS_PCI_MEM_BASE, SZ_16M, MT_DEVICE },
- { PCI_CONFIG_VADDR, PHYS_PCI_CONFIG_BASE, SZ_16M, MT_DEVICE },
- { PCI_V3_VADDR, PHYS_PCI_V3_BASE, SZ_512K, MT_DEVICE },
- { PCI_IO_VADDR, PHYS_PCI_IO_BASE, SZ_64K, MT_DEVICE },
+#ifdef CONFIG_PCI
+ { IO_ADDRESS(VERSATILE_PCI_CORE_BASE), VERSATILE_PCI_CORE_BASE, SZ_4K, MT_DEVICE },
+ { VERSATILE_PCI_VIRT_BASE, VERSATILE_PCI_BASE, VERSATILE_PCI_BASE_SIZE, MT_DEVICE },
+ { VERSATILE_PCI_CFG_VIRT_BASE, VERSATILE_PCI_CFG_BASE, VERSATILE_PCI_CFG_BASE_SIZE, MT_DEVICE },
+#if 0
+ { VERSATILE_PCI_VIRT_MEM_BASE0, VERSATILE_PCI_MEM_BASE0, SZ_16M, MT_DEVICE },
+ { VERSATILE_PCI_VIRT_MEM_BASE1, VERSATILE_PCI_MEM_BASE1, SZ_16M, MT_DEVICE },
+ { VERSATILE_PCI_VIRT_MEM_BASE2, VERSATILE_PCI_MEM_BASE2, SZ_16M, MT_DEVICE },
+#endif
#endif
};
@@ -543,7 +547,7 @@ static void versatile_clcd_enable(struct clcd_fb *fb)
val |= SYS_CLCD_MODE_5551;
break;
case 6:
- val |= SYS_CLCD_MODE_565_BLSB;
+ val |= SYS_CLCD_MODE_565_RLSB;
break;
case 8:
val |= SYS_CLCD_MODE_888;
diff --git a/arch/arm/mach-versatile/pci.c b/arch/arm/mach-versatile/pci.c
new file mode 100644
index 0000000000000000000000000000000000000000..d1565e851f0e01f6b6e63f73939455214c817ef0
--- /dev/null
+++ b/arch/arm/mach-versatile/pci.c
@@ -0,0 +1,360 @@
+/*
+ * linux/arch/arm/mach-versatile/pci.c
+ *
+ * (C) Copyright Koninklijke Philips Electronics NV 2004. All rights reserved.
+ * You can redistribute and/or modify this software under the terms of version 2
+ * of the GNU General Public License as published by the Free Software Foundation.
+ * THIS SOFTWARE IS PROVIDED "AS IS" WITHOUT ANY WARRANTY; WITHOUT EVEN THE IMPLIED
+ * WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ * Koninklijke Philips Electronics nor its subsidiaries is obligated to provide any support for this software.
+ *
+ * ARM Versatile PCI driver.
+ *
+ * 14/04/2005 Initial version, colin.king@philips.com
+ *
+ */
+#include
+#include
+#include
+#include
+#include
+#include
+#include