Commit 9d556bb4 authored by Mike Looijmans's avatar Mike Looijmans Committed by Sebastian Reichel
Browse files

dt-bindings: power: supply: New bindings for ltc3651-charger 



This adds the devicetree bindings documentation for the LTC3651 battery charger.

Signed-off-by: default avatarMike Looijmans <mike.looijmans@topic.nl>
Acked-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarSebastian Reichel <sebastian.reichel@collabora.co.uk>
parent 70c9fc9a

Documentation/devicetree/bindings/power/supply/ltc3651-charger.txt

0 → 100644
+27 −0
Original line number Diff line number Diff line 
ltc3651-charger



Required properties:

 - compatible: "lltc,ltc3651-charger"

 - lltc,acpr-gpios: Connect to ACPR output. See remark below.



Optional properties:

 - lltc,fault-gpios: Connect to FAULT output. See remark below.

 - lltc,chrg-gpios: Connect to CHRG output. See remark below.



The ltc3651 outputs are open-drain type and active low. The driver assumes the

GPIO reports "active" when the output is asserted, so if the pins have been

connected directly, the GPIO flags should be set to active low also.



The driver will attempt to aquire interrupts for all GPIOs to detect changes in

line state. If the system is not capabale of providing interrupts, the driver

cannot report changes and userspace will need to periodically read the sysfs

attributes to detect changes.



Example:



	charger: battery-charger {

		compatible = "lltc,ltc3651-charger";

		lltc,acpr-gpios = <&gpio0 68 GPIO_ACTIVE_LOW>;

		lltc,fault-gpios = <&gpio0 64 GPIO_ACTIVE_LOW>;

		lltc,chrg-gpios = <&gpio0 63 GPIO_ACTIVE_LOW>;

	};