Loading Documentation/devicetree/bindings/usb/dwc3.txt +1 −0 Original line number Diff line number Diff line Loading @@ -32,6 +32,7 @@ Optional properties: - snps,tx_de_emphasis_quirk: when set core will set Tx de-emphasis value. - snps,tx_de_emphasis: the value driven to the PHY is controlled by the LTSSM during USB3 Compliance mode. - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy. This is usually a subnode to DWC3 glue to which it is connected. Loading drivers/usb/dwc3/core.c +6 −0 Original line number Diff line number Diff line Loading @@ -404,6 +404,9 @@ static void dwc3_phy_setup(struct dwc3 *dwc) if (dwc->tx_de_emphasis_quirk) reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis); if (dwc->dis_u3_susphy_quirk && dwc->is_fpga) reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); mdelay(100); Loading Loading @@ -812,6 +815,8 @@ static int dwc3_probe(struct platform_device *pdev) "snps,lfps_filter_quirk"); dwc->rx_detect_poll_quirk = of_property_read_bool(node, "snps,rx_detect_poll_quirk"); dwc->dis_u3_susphy_quirk = of_property_read_bool(node, "snps,dis_u3_susphy_quirk"); dwc->tx_de_emphasis_quirk = of_property_read_bool(node, "snps,tx_de_emphasis_quirk"); Loading @@ -834,6 +839,7 @@ static int dwc3_probe(struct platform_device *pdev) dwc->del_phy_power_chg_quirk = pdata->del_phy_power_chg_quirk; dwc->lfps_filter_quirk = pdata->lfps_filter_quirk; dwc->rx_detect_poll_quirk = pdata->rx_detect_poll_quirk; dwc->dis_u3_susphy_quirk = pdata->dis_u3_susphy_quirk; dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk; if (pdata->tx_de_emphasis) Loading drivers/usb/dwc3/core.h +2 −0 Original line number Diff line number Diff line Loading @@ -697,6 +697,7 @@ struct dwc3_scratchpad_array { * @del_phy_power_chg_quirk: set if we enable delay phy power change quirk * @lfps_filter_quirk: set if we enable LFPS filter quirk * @rx_detect_poll_quirk: set if we enable rx_detect to polling lfps quirk * @dis_u3_susphy_quirk: set if we disable usb3 suspend phy * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk * @tx_de_emphasis: Tx de-emphasis value * 0 - -6dB de-emphasis Loading Loading @@ -818,6 +819,7 @@ struct dwc3 { unsigned del_phy_power_chg_quirk:1; unsigned lfps_filter_quirk:1; unsigned rx_detect_poll_quirk:1; unsigned dis_u3_susphy_quirk:1; unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; Loading drivers/usb/dwc3/platform_data.h +1 −0 Original line number Diff line number Diff line Loading @@ -36,6 +36,7 @@ struct dwc3_platform_data { unsigned del_phy_power_chg_quirk:1; unsigned lfps_filter_quirk:1; unsigned rx_detect_poll_quirk:1; unsigned dis_u3_susphy_quirk:1; unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; Loading Loading
Documentation/devicetree/bindings/usb/dwc3.txt +1 −0 Original line number Diff line number Diff line Loading @@ -32,6 +32,7 @@ Optional properties: - snps,tx_de_emphasis_quirk: when set core will set Tx de-emphasis value. - snps,tx_de_emphasis: the value driven to the PHY is controlled by the LTSSM during USB3 Compliance mode. - snps,dis_u3_susphy_quirk: when set core will disable USB3 suspend phy. This is usually a subnode to DWC3 glue to which it is connected. Loading
drivers/usb/dwc3/core.c +6 −0 Original line number Diff line number Diff line Loading @@ -404,6 +404,9 @@ static void dwc3_phy_setup(struct dwc3 *dwc) if (dwc->tx_de_emphasis_quirk) reg |= DWC3_GUSB3PIPECTL_TX_DEEPH(dwc->tx_de_emphasis); if (dwc->dis_u3_susphy_quirk && dwc->is_fpga) reg &= ~DWC3_GUSB3PIPECTL_SUSPHY; dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), reg); mdelay(100); Loading Loading @@ -812,6 +815,8 @@ static int dwc3_probe(struct platform_device *pdev) "snps,lfps_filter_quirk"); dwc->rx_detect_poll_quirk = of_property_read_bool(node, "snps,rx_detect_poll_quirk"); dwc->dis_u3_susphy_quirk = of_property_read_bool(node, "snps,dis_u3_susphy_quirk"); dwc->tx_de_emphasis_quirk = of_property_read_bool(node, "snps,tx_de_emphasis_quirk"); Loading @@ -834,6 +839,7 @@ static int dwc3_probe(struct platform_device *pdev) dwc->del_phy_power_chg_quirk = pdata->del_phy_power_chg_quirk; dwc->lfps_filter_quirk = pdata->lfps_filter_quirk; dwc->rx_detect_poll_quirk = pdata->rx_detect_poll_quirk; dwc->dis_u3_susphy_quirk = pdata->dis_u3_susphy_quirk; dwc->tx_de_emphasis_quirk = pdata->tx_de_emphasis_quirk; if (pdata->tx_de_emphasis) Loading
drivers/usb/dwc3/core.h +2 −0 Original line number Diff line number Diff line Loading @@ -697,6 +697,7 @@ struct dwc3_scratchpad_array { * @del_phy_power_chg_quirk: set if we enable delay phy power change quirk * @lfps_filter_quirk: set if we enable LFPS filter quirk * @rx_detect_poll_quirk: set if we enable rx_detect to polling lfps quirk * @dis_u3_susphy_quirk: set if we disable usb3 suspend phy * @tx_de_emphasis_quirk: set if we enable Tx de-emphasis quirk * @tx_de_emphasis: Tx de-emphasis value * 0 - -6dB de-emphasis Loading Loading @@ -818,6 +819,7 @@ struct dwc3 { unsigned del_phy_power_chg_quirk:1; unsigned lfps_filter_quirk:1; unsigned rx_detect_poll_quirk:1; unsigned dis_u3_susphy_quirk:1; unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; Loading
drivers/usb/dwc3/platform_data.h +1 −0 Original line number Diff line number Diff line Loading @@ -36,6 +36,7 @@ struct dwc3_platform_data { unsigned del_phy_power_chg_quirk:1; unsigned lfps_filter_quirk:1; unsigned rx_detect_poll_quirk:1; unsigned dis_u3_susphy_quirk:1; unsigned tx_de_emphasis_quirk:1; unsigned tx_de_emphasis:2; Loading