diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 9b1f6ca100d1de96e9071193f90a3cbf6d81e34c..0a08126d30942bad2f59d11e09c9c651c8f5e63b 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -6,7 +6,7 @@
# To add a new book the only step required is to add the book to the
# list of DOCBOOKS.
-DOCBOOKS := wanbook.xml z8530book.xml mcabook.xml \
+DOCBOOKS := z8530book.xml mcabook.xml \
kernel-hacking.xml kernel-locking.xml deviceiobook.xml \
procfs-guide.xml writing_usb_driver.xml networking.xml \
kernel-api.xml filesystems.xml lsm.xml usb.xml kgdb.xml \
diff --git a/Documentation/DocBook/networking.tmpl b/Documentation/DocBook/networking.tmpl
index f24f9e85e4aeba788d7b4557bf19d93efaa7dc99..627707a3cb9d66406ba40a356cf000772de97701 100644
--- a/Documentation/DocBook/networking.tmpl
+++ b/Documentation/DocBook/networking.tmpl
@@ -98,9 +98,6 @@
X!Enet/core/wireless.c
-->
- Synchronous PPP
-!Edrivers/net/wan/syncppp.c
-
diff --git a/Documentation/DocBook/wanbook.tmpl b/Documentation/DocBook/wanbook.tmpl
deleted file mode 100644
index 8c93db122f049a13177b5d5f612d8da3f12aeaad..0000000000000000000000000000000000000000
--- a/Documentation/DocBook/wanbook.tmpl
+++ /dev/null
@@ -1,99 +0,0 @@
-
-
-
-
-
- Synchronous PPP and Cisco HDLC Programming Guide
-
-
-
- Alan
- Cox
-
-
- alan@lxorguk.ukuu.org.uk
-
-
-
-
-
-
- 2000
- Alan Cox
-
-
-
-
- This documentation is free software; you can redistribute
- it and/or modify it under the terms of the GNU General Public
- License as published by the Free Software Foundation; either
- version 2 of the License, or (at your option) any later
- version.
-
-
-
- This program is distributed in the hope that it will be
- useful, but WITHOUT ANY WARRANTY; without even the implied
- warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- See the GNU General Public License for more details.
-
-
-
- You should have received a copy of the GNU General Public
- License along with this program; if not, write to the Free
- Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
-
-
-
- For more details see the file COPYING in the source
- distribution of Linux.
-
-
-
-
-
-
-
- Introduction
-
- The syncppp drivers in Linux provide a fairly complete
- implementation of Cisco HDLC and a minimal implementation of
- PPP. The longer term goal is to switch the PPP layer to the
- generic PPP interface that is new in Linux 2.3.x. The API should
- remain unchanged when this is done, but support will then be
- available for IPX, compression and other PPP features
-
-
-
- Known Bugs And Assumptions
-
-
- PPP is minimal
-
-
- The current PPP implementation is very basic, although sufficient
- for most wan usages.
-
-
-
- Cisco HDLC Quirks
-
-
- Currently we do not end all packets with the correct Cisco multicast
- or unicast flags. Nothing appears to mind too much but this should
- be corrected.
-
-
-
-
-
-
-
-
- Public Functions Provided
-!Edrivers/net/wan/syncppp.c
-
-
-
diff --git a/Documentation/RCU/rculist_nulls.txt b/Documentation/RCU/rculist_nulls.txt
new file mode 100644
index 0000000000000000000000000000000000000000..239f542d48baa9425f29a54b6b43f00468d986c2
--- /dev/null
+++ b/Documentation/RCU/rculist_nulls.txt
@@ -0,0 +1,167 @@
+Using hlist_nulls to protect read-mostly linked lists and
+objects using SLAB_DESTROY_BY_RCU allocations.
+
+Please read the basics in Documentation/RCU/listRCU.txt
+
+Using special makers (called 'nulls') is a convenient way
+to solve following problem :
+
+A typical RCU linked list managing objects which are
+allocated with SLAB_DESTROY_BY_RCU kmem_cache can
+use following algos :
+
+1) Lookup algo
+--------------
+rcu_read_lock()
+begin:
+obj = lockless_lookup(key);
+if (obj) {
+ if (!try_get_ref(obj)) // might fail for free objects
+ goto begin;
+ /*
+ * Because a writer could delete object, and a writer could
+ * reuse these object before the RCU grace period, we
+ * must check key after geting the reference on object
+ */
+ if (obj->key != key) { // not the object we expected
+ put_ref(obj);
+ goto begin;
+ }
+}
+rcu_read_unlock();
+
+Beware that lockless_lookup(key) cannot use traditional hlist_for_each_entry_rcu()
+but a version with an additional memory barrier (smp_rmb())
+
+lockless_lookup(key)
+{
+ struct hlist_node *node, *next;
+ for (pos = rcu_dereference((head)->first);
+ pos && ({ next = pos->next; smp_rmb(); prefetch(next); 1; }) &&
+ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });
+ pos = rcu_dereference(next))
+ if (obj->key == key)
+ return obj;
+ return NULL;
+
+And note the traditional hlist_for_each_entry_rcu() misses this smp_rmb() :
+
+ struct hlist_node *node;
+ for (pos = rcu_dereference((head)->first);
+ pos && ({ prefetch(pos->next); 1; }) &&
+ ({ tpos = hlist_entry(pos, typeof(*tpos), member); 1; });
+ pos = rcu_dereference(pos->next))
+ if (obj->key == key)
+ return obj;
+ return NULL;
+}
+
+Quoting Corey Minyard :
+
+"If the object is moved from one list to another list in-between the
+ time the hash is calculated and the next field is accessed, and the
+ object has moved to the end of a new list, the traversal will not
+ complete properly on the list it should have, since the object will
+ be on the end of the new list and there's not a way to tell it's on a
+ new list and restart the list traversal. I think that this can be
+ solved by pre-fetching the "next" field (with proper barriers) before
+ checking the key."
+
+2) Insert algo :
+----------------
+
+We need to make sure a reader cannot read the new 'obj->obj_next' value
+and previous value of 'obj->key'. Or else, an item could be deleted
+from a chain, and inserted into another chain. If new chain was empty
+before the move, 'next' pointer is NULL, and lockless reader can
+not detect it missed following items in original chain.
+
+/*
+ * Please note that new inserts are done at the head of list,
+ * not in the middle or end.
+ */
+obj = kmem_cache_alloc(...);
+lock_chain(); // typically a spin_lock()
+obj->key = key;
+atomic_inc(&obj->refcnt);
+/*
+ * we need to make sure obj->key is updated before obj->next
+ */
+smp_wmb();
+hlist_add_head_rcu(&obj->obj_node, list);
+unlock_chain(); // typically a spin_unlock()
+
+
+3) Remove algo
+--------------
+Nothing special here, we can use a standard RCU hlist deletion.
+But thanks to SLAB_DESTROY_BY_RCU, beware a deleted object can be reused
+very very fast (before the end of RCU grace period)
+
+if (put_last_reference_on(obj) {
+ lock_chain(); // typically a spin_lock()
+ hlist_del_init_rcu(&obj->obj_node);
+ unlock_chain(); // typically a spin_unlock()
+ kmem_cache_free(cachep, obj);
+}
+
+
+
+--------------------------------------------------------------------------
+With hlist_nulls we can avoid extra smp_rmb() in lockless_lookup()
+and extra smp_wmb() in insert function.
+
+For example, if we choose to store the slot number as the 'nulls'
+end-of-list marker for each slot of the hash table, we can detect
+a race (some writer did a delete and/or a move of an object
+to another chain) checking the final 'nulls' value if
+the lookup met the end of chain. If final 'nulls' value
+is not the slot number, then we must restart the lookup at
+the begining. If the object was moved to same chain,
+then the reader doesnt care : It might eventually
+scan the list again without harm.
+
+
+1) lookup algo
+
+ head = &table[slot];
+ rcu_read_lock();
+begin:
+ hlist_nulls_for_each_entry_rcu(obj, node, head, member) {
+ if (obj->key == key) {
+ if (!try_get_ref(obj)) // might fail for free objects
+ goto begin;
+ if (obj->key != key) { // not the object we expected
+ put_ref(obj);
+ goto begin;
+ }
+ goto out;
+ }
+/*
+ * if the nulls value we got at the end of this lookup is
+ * not the expected one, we must restart lookup.
+ * We probably met an item that was moved to another chain.
+ */
+ if (get_nulls_value(node) != slot)
+ goto begin;
+ obj = NULL;
+
+out:
+ rcu_read_unlock();
+
+2) Insert function :
+--------------------
+
+/*
+ * Please note that new inserts are done at the head of list,
+ * not in the middle or end.
+ */
+obj = kmem_cache_alloc(cachep);
+lock_chain(); // typically a spin_lock()
+obj->key = key;
+atomic_set(&obj->refcnt, 1);
+/*
+ * insert obj in RCU way (readers might be traversing chain)
+ */
+hlist_nulls_add_head_rcu(&obj->obj_node, list);
+unlock_chain(); // typically a spin_unlock()
diff --git a/Documentation/controllers/cpuacct.txt b/Documentation/controllers/cpuacct.txt
new file mode 100644
index 0000000000000000000000000000000000000000..bb775fbe43d78f6f5083f03a7986d9edf9012a05
--- /dev/null
+++ b/Documentation/controllers/cpuacct.txt
@@ -0,0 +1,32 @@
+CPU Accounting Controller
+-------------------------
+
+The CPU accounting controller is used to group tasks using cgroups and
+account the CPU usage of these groups of tasks.
+
+The CPU accounting controller supports multi-hierarchy groups. An accounting
+group accumulates the CPU usage of all of its child groups and the tasks
+directly present in its group.
+
+Accounting groups can be created by first mounting the cgroup filesystem.
+
+# mkdir /cgroups
+# mount -t cgroup -ocpuacct none /cgroups
+
+With the above step, the initial or the parent accounting group
+becomes visible at /cgroups. At bootup, this group includes all the
+tasks in the system. /cgroups/tasks lists the tasks in this cgroup.
+/cgroups/cpuacct.usage gives the CPU time (in nanoseconds) obtained by
+this group which is essentially the CPU time obtained by all the tasks
+in the system.
+
+New accounting groups can be created under the parent group /cgroups.
+
+# cd /cgroups
+# mkdir g1
+# echo $$ > g1
+
+The above steps create a new group g1 and move the current shell
+process (bash) into it. CPU time consumed by this bash and its children
+can be obtained from g1/cpuacct.usage and the same is accumulated in
+/cgroups/cpuacct.usage also.
diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index 4f3f3840320e30eaa0650e9197725b7d6e811b4e..e3443ddcfb890028cc8f1a9576a029c35d200154 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -93,10 +93,8 @@ Several "PowerBook" and "iBook2" notebooks are supported.
1.5 SuperH
----------
-The following SuperH processors are supported by cpufreq:
-
-SH-3
-SH-4
+All SuperH processors supporting rate rounding through the clock
+framework are supported by cpufreq.
1.6 Blackfin
------------
diff --git a/Documentation/credentials.txt b/Documentation/credentials.txt
new file mode 100644
index 0000000000000000000000000000000000000000..df03169782ea1811cc46ac93a82fad09aaeec8c8
--- /dev/null
+++ b/Documentation/credentials.txt
@@ -0,0 +1,582 @@
+ ====================
+ CREDENTIALS IN LINUX
+ ====================
+
+By: David Howells
+
+Contents:
+
+ (*) Overview.
+
+ (*) Types of credentials.
+
+ (*) File markings.
+
+ (*) Task credentials.
+
+ - Immutable credentials.
+ - Accessing task credentials.
+ - Accessing another task's credentials.
+ - Altering credentials.
+ - Managing credentials.
+
+ (*) Open file credentials.
+
+ (*) Overriding the VFS's use of credentials.
+
+
+========
+OVERVIEW
+========
+
+There are several parts to the security check performed by Linux when one
+object acts upon another:
+
+ (1) Objects.
+
+ Objects are things in the system that may be acted upon directly by
+ userspace programs. Linux has a variety of actionable objects, including:
+
+ - Tasks
+ - Files/inodes
+ - Sockets
+ - Message queues
+ - Shared memory segments
+ - Semaphores
+ - Keys
+
+ As a part of the description of all these objects there is a set of
+ credentials. What's in the set depends on the type of object.
+
+ (2) Object ownership.
+
+ Amongst the credentials of most objects, there will be a subset that
+ indicates the ownership of that object. This is used for resource
+ accounting and limitation (disk quotas and task rlimits for example).
+
+ In a standard UNIX filesystem, for instance, this will be defined by the
+ UID marked on the inode.
+
+ (3) The objective context.
+
+ Also amongst the credentials of those objects, there will be a subset that
+ indicates the 'objective context' of that object. This may or may not be
+ the same set as in (2) - in standard UNIX files, for instance, this is the
+ defined by the UID and the GID marked on the inode.
+
+ The objective context is used as part of the security calculation that is
+ carried out when an object is acted upon.
+
+ (4) Subjects.
+
+ A subject is an object that is acting upon another object.
+
+ Most of the objects in the system are inactive: they don't act on other
+ objects within the system. Processes/tasks are the obvious exception:
+ they do stuff; they access and manipulate things.
+
+ Objects other than tasks may under some circumstances also be subjects.
+ For instance an open file may send SIGIO to a task using the UID and EUID
+ given to it by a task that called fcntl(F_SETOWN) upon it. In this case,
+ the file struct will have a subjective context too.
+
+ (5) The subjective context.
+
+ A subject has an additional interpretation of its credentials. A subset
+ of its credentials forms the 'subjective context'. The subjective context
+ is used as part of the security calculation that is carried out when a
+ subject acts.
+
+ A Linux task, for example, has the FSUID, FSGID and the supplementary
+ group list for when it is acting upon a file - which are quite separate
+ from the real UID and GID that normally form the objective context of the
+ task.
+
+ (6) Actions.
+
+ Linux has a number of actions available that a subject may perform upon an
+ object. The set of actions available depends on the nature of the subject
+ and the object.
+
+ Actions include reading, writing, creating and deleting files; forking or
+ signalling and tracing tasks.
+
+ (7) Rules, access control lists and security calculations.
+
+ When a subject acts upon an object, a security calculation is made. This
+ involves taking the subjective context, the objective context and the
+ action, and searching one or more sets of rules to see whether the subject
+ is granted or denied permission to act in the desired manner on the
+ object, given those contexts.
+
+ There are two main sources of rules:
+
+ (a) Discretionary access control (DAC):
+
+ Sometimes the object will include sets of rules as part of its
+ description. This is an 'Access Control List' or 'ACL'. A Linux
+ file may supply more than one ACL.
+
+ A traditional UNIX file, for example, includes a permissions mask that
+ is an abbreviated ACL with three fixed classes of subject ('user',
+ 'group' and 'other'), each of which may be granted certain privileges
+ ('read', 'write' and 'execute' - whatever those map to for the object
+ in question). UNIX file permissions do not allow the arbitrary
+ specification of subjects, however, and so are of limited use.
+
+ A Linux file might also sport a POSIX ACL. This is a list of rules
+ that grants various permissions to arbitrary subjects.
+
+ (b) Mandatory access control (MAC):
+
+ The system as a whole may have one or more sets of rules that get
+ applied to all subjects and objects, regardless of their source.
+ SELinux and Smack are examples of this.
+
+ In the case of SELinux and Smack, each object is given a label as part
+ of its credentials. When an action is requested, they take the
+ subject label, the object label and the action and look for a rule
+ that says that this action is either granted or denied.
+
+
+====================
+TYPES OF CREDENTIALS
+====================
+
+The Linux kernel supports the following types of credentials:
+
+ (1) Traditional UNIX credentials.
+
+ Real User ID
+ Real Group ID
+
+ The UID and GID are carried by most, if not all, Linux objects, even if in
+ some cases it has to be invented (FAT or CIFS files for example, which are
+ derived from Windows). These (mostly) define the objective context of
+ that object, with tasks being slightly different in some cases.
+
+ Effective, Saved and FS User ID
+ Effective, Saved and FS Group ID
+ Supplementary groups
+
+ These are additional credentials used by tasks only. Usually, an
+ EUID/EGID/GROUPS will be used as the subjective context, and real UID/GID
+ will be used as the objective. For tasks, it should be noted that this is
+ not always true.
+
+ (2) Capabilities.
+
+ Set of permitted capabilities
+ Set of inheritable capabilities
+ Set of effective capabilities
+ Capability bounding set
+
+ These are only carried by tasks. They indicate superior capabilities
+ granted piecemeal to a task that an ordinary task wouldn't otherwise have.
+ These are manipulated implicitly by changes to the traditional UNIX
+ credentials, but can also be manipulated directly by the capset() system
+ call.
+
+ The permitted capabilities are those caps that the process might grant
+ itself to its effective or permitted sets through capset(). This
+ inheritable set might also be so constrained.
+
+ The effective capabilities are the ones that a task is actually allowed to
+ make use of itself.
+
+ The inheritable capabilities are the ones that may get passed across
+ execve().
+
+ The bounding set limits the capabilities that may be inherited across
+ execve(), especially when a binary is executed that will execute as UID 0.
+
+ (3) Secure management flags (securebits).
+
+ These are only carried by tasks. These govern the way the above
+ credentials are manipulated and inherited over certain operations such as
+ execve(). They aren't used directly as objective or subjective
+ credentials.
+
+ (4) Keys and keyrings.
+
+ These are only carried by tasks. They carry and cache security tokens
+ that don't fit into the other standard UNIX credentials. They are for
+ making such things as network filesystem keys available to the file
+ accesses performed by processes, without the necessity of ordinary
+ programs having to know about security details involved.
+
+ Keyrings are a special type of key. They carry sets of other keys and can
+ be searched for the desired key. Each process may subscribe to a number
+ of keyrings:
+
+ Per-thread keying
+ Per-process keyring
+ Per-session keyring
+
+ When a process accesses a key, if not already present, it will normally be
+ cached on one of these keyrings for future accesses to find.
+
+ For more information on using keys, see Documentation/keys.txt.
+
+ (5) LSM
+
+ The Linux Security Module allows extra controls to be placed over the
+ operations that a task may do. Currently Linux supports two main
+ alternate LSM options: SELinux and Smack.
+
+ Both work by labelling the objects in a system and then applying sets of
+ rules (policies) that say what operations a task with one label may do to
+ an object with another label.
+
+ (6) AF_KEY
+
+ This is a socket-based approach to credential management for networking
+ stacks [RFC 2367]. It isn't discussed by this document as it doesn't
+ interact directly with task and file credentials; rather it keeps system
+ level credentials.
+
+
+When a file is opened, part of the opening task's subjective context is
+recorded in the file struct created. This allows operations using that file
+struct to use those credentials instead of the subjective context of the task
+that issued the operation. An example of this would be a file opened on a
+network filesystem where the credentials of the opened file should be presented
+to the server, regardless of who is actually doing a read or a write upon it.
+
+
+=============
+FILE MARKINGS
+=============
+
+Files on disk or obtained over the network may have annotations that form the
+objective security context of that file. Depending on the type of filesystem,
+this may include one or more of the following:
+
+ (*) UNIX UID, GID, mode;
+
+ (*) Windows user ID;
+
+ (*) Access control list;
+
+ (*) LSM security label;
+
+ (*) UNIX exec privilege escalation bits (SUID/SGID);
+
+ (*) File capabilities exec privilege escalation bits.
+
+These are compared to the task's subjective security context, and certain
+operations allowed or disallowed as a result. In the case of execve(), the
+privilege escalation bits come into play, and may allow the resulting process
+extra privileges, based on the annotations on the executable file.
+
+
+================
+TASK CREDENTIALS
+================
+
+In Linux, all of a task's credentials are held in (uid, gid) or through
+(groups, keys, LSM security) a refcounted structure of type 'struct cred'.
+Each task points to its credentials by a pointer called 'cred' in its
+task_struct.
+
+Once a set of credentials has been prepared and committed, it may not be
+changed, barring the following exceptions:
+
+ (1) its reference count may be changed;
+
+ (2) the reference count on the group_info struct it points to may be changed;
+
+ (3) the reference count on the security data it points to may be changed;
+
+ (4) the reference count on any keyrings it points to may be changed;
+
+ (5) any keyrings it points to may be revoked, expired or have their security
+ attributes changed; and
+
+ (6) the contents of any keyrings to which it points may be changed (the whole
+ point of keyrings being a shared set of credentials, modifiable by anyone
+ with appropriate access).
+
+To alter anything in the cred struct, the copy-and-replace principle must be
+adhered to. First take a copy, then alter the copy and then use RCU to change
+the task pointer to make it point to the new copy. There are wrappers to aid
+with this (see below).
+
+A task may only alter its _own_ credentials; it is no longer permitted for a
+task to alter another's credentials. This means the capset() system call is no
+longer permitted to take any PID other than the one of the current process.
+Also keyctl_instantiate() and keyctl_negate() functions no longer permit
+attachment to process-specific keyrings in the requesting process as the
+instantiating process may need to create them.
+
+
+IMMUTABLE CREDENTIALS
+---------------------
+
+Once a set of credentials has been made public (by calling commit_creds() for
+example), it must be considered immutable, barring two exceptions:
+
+ (1) The reference count may be altered.
+
+ (2) Whilst the keyring subscriptions of a set of credentials may not be
+ changed, the keyrings subscribed to may have their contents altered.
+
+To catch accidental credential alteration at compile time, struct task_struct
+has _const_ pointers to its credential sets, as does struct file. Furthermore,
+certain functions such as get_cred() and put_cred() operate on const pointers,
+thus rendering casts unnecessary, but require to temporarily ditch the const
+qualification to be able to alter the reference count.
+
+
+ACCESSING TASK CREDENTIALS
+--------------------------
+
+A task being able to alter only its own credentials permits the current process
+to read or replace its own credentials without the need for any form of locking
+- which simplifies things greatly. It can just call:
+
+ const struct cred *current_cred()
+
+to get a pointer to its credentials structure, and it doesn't have to release
+it afterwards.
+
+There are convenience wrappers for retrieving specific aspects of a task's
+credentials (the value is simply returned in each case):
+
+ uid_t current_uid(void) Current's real UID
+ gid_t current_gid(void) Current's real GID
+ uid_t current_euid(void) Current's effective UID
+ gid_t current_egid(void) Current's effective GID
+ uid_t current_fsuid(void) Current's file access UID
+ gid_t current_fsgid(void) Current's file access GID
+ kernel_cap_t current_cap(void) Current's effective capabilities
+ void *current_security(void) Current's LSM security pointer
+ struct user_struct *current_user(void) Current's user account
+
+There are also convenience wrappers for retrieving specific associated pairs of
+a task's credentials:
+
+ void current_uid_gid(uid_t *, gid_t *);
+ void current_euid_egid(uid_t *, gid_t *);
+ void current_fsuid_fsgid(uid_t *, gid_t *);
+
+which return these pairs of values through their arguments after retrieving
+them from the current task's credentials.
+
+
+In addition, there is a function for obtaining a reference on the current
+process's current set of credentials:
+
+ const struct cred *get_current_cred(void);
+
+and functions for getting references to one of the credentials that don't
+actually live in struct cred:
+
+ struct user_struct *get_current_user(void);
+ struct group_info *get_current_groups(void);
+
+which get references to the current process's user accounting structure and
+supplementary groups list respectively.
+
+Once a reference has been obtained, it must be released with put_cred(),
+free_uid() or put_group_info() as appropriate.
+
+
+ACCESSING ANOTHER TASK'S CREDENTIALS
+------------------------------------
+
+Whilst a task may access its own credentials without the need for locking, the
+same is not true of a task wanting to access another task's credentials. It
+must use the RCU read lock and rcu_dereference().
+
+The rcu_dereference() is wrapped by:
+
+ const struct cred *__task_cred(struct task_struct *task);
+
+This should be used inside the RCU read lock, as in the following example:
+
+ void foo(struct task_struct *t, struct foo_data *f)
+ {
+ const struct cred *tcred;
+ ...
+ rcu_read_lock();
+ tcred = __task_cred(t);
+ f->uid = tcred->uid;
+ f->gid = tcred->gid;
+ f->groups = get_group_info(tcred->groups);
+ rcu_read_unlock();
+ ...
+ }
+
+A function need not get RCU read lock to use __task_cred() if it is holding a
+spinlock at the time as this implicitly holds the RCU read lock.
+
+Should it be necessary to hold another task's credentials for a long period of
+time, and possibly to sleep whilst doing so, then the caller should get a
+reference on them using:
+
+ const struct cred *get_task_cred(struct task_struct *task);
+
+This does all the RCU magic inside of it. The caller must call put_cred() on
+the credentials so obtained when they're finished with.
+
+There are a couple of convenience functions to access bits of another task's
+credentials, hiding the RCU magic from the caller:
+
+ uid_t task_uid(task) Task's real UID
+ uid_t task_euid(task) Task's effective UID
+
+If the caller is holding a spinlock or the RCU read lock at the time anyway,
+then:
+
+ __task_cred(task)->uid
+ __task_cred(task)->euid
+
+should be used instead. Similarly, if multiple aspects of a task's credentials
+need to be accessed, RCU read lock or a spinlock should be used, __task_cred()
+called, the result stored in a temporary pointer and then the credential
+aspects called from that before dropping the lock. This prevents the
+potentially expensive RCU magic from being invoked multiple times.
+
+Should some other single aspect of another task's credentials need to be
+accessed, then this can be used:
+
+ task_cred_xxx(task, member)
+
+where 'member' is a non-pointer member of the cred struct. For instance:
+
+ uid_t task_cred_xxx(task, suid);
+
+will retrieve 'struct cred::suid' from the task, doing the appropriate RCU
+magic. This may not be used for pointer members as what they point to may
+disappear the moment the RCU read lock is dropped.
+
+
+ALTERING CREDENTIALS
+--------------------
+
+As previously mentioned, a task may only alter its own credentials, and may not
+alter those of another task. This means that it doesn't need to use any
+locking to alter its own credentials.
+
+To alter the current process's credentials, a function should first prepare a
+new set of credentials by calling:
+
+ struct cred *prepare_creds(void);
+
+this locks current->cred_replace_mutex and then allocates and constructs a
+duplicate of the current process's credentials, returning with the mutex still
+held if successful. It returns NULL if not successful (out of memory).
+
+The mutex prevents ptrace() from altering the ptrace state of a process whilst
+security checks on credentials construction and changing is taking place as
+the ptrace state may alter the outcome, particularly in the case of execve().
+
+The new credentials set should be altered appropriately, and any security
+checks and hooks done. Both the current and the proposed sets of credentials
+are available for this purpose as current_cred() will return the current set
+still at this point.
+
+
+When the credential set is ready, it should be committed to the current process
+by calling:
+
+ int commit_creds(struct cred *new);
+
+This will alter various aspects of the credentials and the process, giving the
+LSM a chance to do likewise, then it will use rcu_assign_pointer() to actually
+commit the new credentials to current->cred, it will release
+current->cred_replace_mutex to allow ptrace() to take place, and it will notify
+the scheduler and others of the changes.
+
+This function is guaranteed to return 0, so that it can be tail-called at the
+end of such functions as sys_setresuid().
+
+Note that this function consumes the caller's reference to the new credentials.
+The caller should _not_ call put_cred() on the new credentials afterwards.
+
+Furthermore, once this function has been called on a new set of credentials,
+those credentials may _not_ be changed further.
+
+
+Should the security checks fail or some other error occur after prepare_creds()
+has been called, then the following function should be invoked:
+
+ void abort_creds(struct cred *new);
+
+This releases the lock on current->cred_replace_mutex that prepare_creds() got
+and then releases the new credentials.
+
+
+A typical credentials alteration function would look something like this:
+
+ int alter_suid(uid_t suid)
+ {
+ struct cred *new;
+ int ret;
+
+ new = prepare_creds();
+ if (!new)
+ return -ENOMEM;
+
+ new->suid = suid;
+ ret = security_alter_suid(new);
+ if (ret < 0) {
+ abort_creds(new);
+ return ret;
+ }
+
+ return commit_creds(new);
+ }
+
+
+MANAGING CREDENTIALS
+--------------------
+
+There are some functions to help manage credentials:
+
+ (*) void put_cred(const struct cred *cred);
+
+ This releases a reference to the given set of credentials. If the
+ reference count reaches zero, the credentials will be scheduled for
+ destruction by the RCU system.
+
+ (*) const struct cred *get_cred(const struct cred *cred);
+
+ This gets a reference on a live set of credentials, returning a pointer to
+ that set of credentials.
+
+ (*) struct cred *get_new_cred(struct cred *cred);
+
+ This gets a reference on a set of credentials that is under construction
+ and is thus still mutable, returning a pointer to that set of credentials.
+
+
+=====================
+OPEN FILE CREDENTIALS
+=====================
+
+When a new file is opened, a reference is obtained on the opening task's
+credentials and this is attached to the file struct as 'f_cred' in place of
+'f_uid' and 'f_gid'. Code that used to access file->f_uid and file->f_gid
+should now access file->f_cred->fsuid and file->f_cred->fsgid.
+
+It is safe to access f_cred without the use of RCU or locking because the
+pointer will not change over the lifetime of the file struct, and nor will the
+contents of the cred struct pointed to, barring the exceptions listed above
+(see the Task Credentials section).
+
+
+=======================================
+OVERRIDING THE VFS'S USE OF CREDENTIALS
+=======================================
+
+Under some circumstances it is desirable to override the credentials used by
+the VFS, and that can be done by calling into such as vfs_mkdir() with a
+different set of credentials. This is done in the following places:
+
+ (*) sys_faccessat().
+
+ (*) do_coredump().
+
+ (*) nfs4recover.c.
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index c28a2ac88f9d9ed1457ab0c04324e3cf20fe986f..dc7c681e532cacf9fbf9ec0f692e9fb2bd5740e7 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -120,13 +120,6 @@ Who: Christoph Hellwig
---------------------------
-What: eepro100 network driver
-When: January 2007
-Why: replaced by the e100 driver
-Who: Adrian Bunk
-
----------------------------
-
What: Unused EXPORT_SYMBOL/EXPORT_SYMBOL_GPL exports
(temporary transition config option provided until then)
The transition config option will also be removed at the same time.
@@ -244,18 +237,6 @@ Who: Michael Buesch
---------------------------
-What: init_mm export
-When: 2.6.26
-Why: Not used in-tree. The current out-of-tree users used it to
- work around problems in the CPA code which should be resolved
- by now. One usecase was described to provide verification code
- of the CPA operation. That's a good idea in general, but such
- code / infrastructure should be in the kernel and not in some
- out-of-tree driver.
-Who: Thomas Gleixner
-
-----------------------------
-
What: usedac i386 kernel parameter
When: 2.6.27
Why: replaced by allowdac and no dac combination
diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt
index bb1b0dd3bfcbcc919bea2fbdf706607608f915c5..71df353e367c9e8c3f2833fe7114c875a6d49d3b 100644
--- a/Documentation/filesystems/proc.txt
+++ b/Documentation/filesystems/proc.txt
@@ -1339,10 +1339,13 @@ nmi_watchdog
Enables/Disables the NMI watchdog on x86 systems. When the value is non-zero
the NMI watchdog is enabled and will continuously test all online cpus to
-determine whether or not they are still functioning properly.
+determine whether or not they are still functioning properly. Currently,
+passing "nmi_watchdog=" parameter at boot time is required for this function
+to work.
-Because the NMI watchdog shares registers with oprofile, by disabling the NMI
-watchdog, oprofile may have more registers to utilize.
+If LAPIC NMI watchdog method is in use (nmi_watchdog=2 kernel parameter), the
+NMI watchdog shares registers with oprofile. By disabling the NMI watchdog,
+oprofile may have more registers to utilize.
msgmni
------
diff --git a/Documentation/ftrace.txt b/Documentation/ftrace.txt
index 9cc4d685dde583464cbfbd9c7448358c2de90ef3..803b1318b13da11242a3558123d28293d3ee4378 100644
--- a/Documentation/ftrace.txt
+++ b/Documentation/ftrace.txt
@@ -82,7 +82,7 @@ of ftrace. Here is a list of some of the key files:
tracer is not adding more data, they will display
the same information every time they are read.
- iter_ctrl: This file lets the user control the amount of data
+ trace_options: This file lets the user control the amount of data
that is displayed in one of the above output
files.
@@ -94,10 +94,10 @@ of ftrace. Here is a list of some of the key files:
only be recorded if the latency is greater than
the value in this file. (in microseconds)
- trace_entries: This sets or displays the number of bytes each CPU
+ buffer_size_kb: This sets or displays the number of kilobytes each CPU
buffer can hold. The tracer buffers are the same size
for each CPU. The displayed number is the size of the
- CPU buffer and not total size of all buffers. The
+ CPU buffer and not total size of all buffers. The
trace buffers are allocated in pages (blocks of memory
that the kernel uses for allocation, usually 4 KB in size).
If the last page allocated has room for more bytes
@@ -127,6 +127,8 @@ of ftrace. Here is a list of some of the key files:
be traced. If a function exists in both set_ftrace_filter
and set_ftrace_notrace, the function will _not_ be traced.
+ set_ftrace_pid: Have the function tracer only trace a single thread.
+
available_filter_functions: This lists the functions that ftrace
has processed and can trace. These are the function
names that you can pass to "set_ftrace_filter" or
@@ -316,23 +318,23 @@ The above is mostly meaningful for kernel developers.
The rest is the same as the 'trace' file.
-iter_ctrl
----------
+trace_options
+-------------
-The iter_ctrl file is used to control what gets printed in the trace
+The trace_options file is used to control what gets printed in the trace
output. To see what is available, simply cat the file:
- cat /debug/tracing/iter_ctrl
+ cat /debug/tracing/trace_options
print-parent nosym-offset nosym-addr noverbose noraw nohex nobin \
- noblock nostacktrace nosched-tree
+ noblock nostacktrace nosched-tree nouserstacktrace nosym-userobj
To disable one of the options, echo in the option prepended with "no".
- echo noprint-parent > /debug/tracing/iter_ctrl
+ echo noprint-parent > /debug/tracing/trace_options
To enable an option, leave off the "no".
- echo sym-offset > /debug/tracing/iter_ctrl
+ echo sym-offset > /debug/tracing/trace_options
Here are the available options:
@@ -378,6 +380,20 @@ Here are the available options:
When a trace is recorded, so is the stack of functions.
This allows for back traces of trace sites.
+ userstacktrace - This option changes the trace.
+ It records a stacktrace of the current userspace thread.
+
+ sym-userobj - when user stacktrace are enabled, look up which object the
+ address belongs to, and print a relative address
+ This is especially useful when ASLR is on, otherwise you don't
+ get a chance to resolve the address to object/file/line after the app is no
+ longer running
+
+ The lookup is performed when you read trace,trace_pipe,latency_trace. Example:
+
+ a.out-1623 [000] 40874.465068: /root/a.out[+0x480] <-/root/a.out[+0
+x494] <- /root/a.out[+0x4a8] <- /lib/libc-2.7.so[+0x1e1a6]
+
sched-tree - TBD (any users??)
@@ -1059,6 +1075,83 @@ For simple one time traces, the above is sufficent. For anything else,
a search through /proc/mounts may be needed to find where the debugfs
file-system is mounted.
+
+Single thread tracing
+---------------------
+
+By writing into /debug/tracing/set_ftrace_pid you can trace a
+single thread. For example:
+
+# cat /debug/tracing/set_ftrace_pid
+no pid
+# echo 3111 > /debug/tracing/set_ftrace_pid
+# cat /debug/tracing/set_ftrace_pid
+3111
+# echo function > /debug/tracing/current_tracer
+# cat /debug/tracing/trace | head
+ # tracer: function
+ #
+ # TASK-PID CPU# TIMESTAMP FUNCTION
+ # | | | | |
+ yum-updatesd-3111 [003] 1637.254676: finish_task_switch <-thread_return
+ yum-updatesd-3111 [003] 1637.254681: hrtimer_cancel <-schedule_hrtimeout_range
+ yum-updatesd-3111 [003] 1637.254682: hrtimer_try_to_cancel <-hrtimer_cancel
+ yum-updatesd-3111 [003] 1637.254683: lock_hrtimer_base <-hrtimer_try_to_cancel
+ yum-updatesd-3111 [003] 1637.254685: fget_light <-do_sys_poll
+ yum-updatesd-3111 [003] 1637.254686: pipe_poll <-do_sys_poll
+# echo -1 > /debug/tracing/set_ftrace_pid
+# cat /debug/tracing/trace |head
+ # tracer: function
+ #
+ # TASK-PID CPU# TIMESTAMP FUNCTION
+ # | | | | |
+ ##### CPU 3 buffer started ####
+ yum-updatesd-3111 [003] 1701.957688: free_poll_entry <-poll_freewait
+ yum-updatesd-3111 [003] 1701.957689: remove_wait_queue <-free_poll_entry
+ yum-updatesd-3111 [003] 1701.957691: fput <-free_poll_entry
+ yum-updatesd-3111 [003] 1701.957692: audit_syscall_exit <-sysret_audit
+ yum-updatesd-3111 [003] 1701.957693: path_put <-audit_syscall_exit
+
+If you want to trace a function when executing, you could use
+something like this simple program:
+
+#include
+#include
+#include
+#include
+#include
+#include
+
+int main (int argc, char **argv)
+{
+ if (argc < 1)
+ exit(-1);
+
+ if (fork() > 0) {
+ int fd, ffd;
+ char line[64];
+ int s;
+
+ ffd = open("/debug/tracing/current_tracer", O_WRONLY);
+ if (ffd < 0)
+ exit(-1);
+ write(ffd, "nop", 3);
+
+ fd = open("/debug/tracing/set_ftrace_pid", O_WRONLY);
+ s = sprintf(line, "%d\n", getpid());
+ write(fd, line, s);
+
+ write(ffd, "function", 8);
+
+ close(fd);
+ close(ffd);
+
+ execvp(argv[1], argv+1);
+ }
+
+ return 0;
+}
+
dynamic ftrace
--------------
@@ -1158,7 +1251,11 @@ These are the only wild cards which are supported.
* will not work.
- # echo hrtimer_* > /debug/tracing/set_ftrace_filter
+Note: It is better to use quotes to enclose the wild cards, otherwise
+ the shell may expand the parameters into names of files in the local
+ directory.
+
+ # echo 'hrtimer_*' > /debug/tracing/set_ftrace_filter
Produces:
@@ -1213,7 +1310,7 @@ Again, now we want to append.
# echo sys_nanosleep > /debug/tracing/set_ftrace_filter
# cat /debug/tracing/set_ftrace_filter
sys_nanosleep
- # echo hrtimer_* >> /debug/tracing/set_ftrace_filter
+ # echo 'hrtimer_*' >> /debug/tracing/set_ftrace_filter
# cat /debug/tracing/set_ftrace_filter
hrtimer_run_queues
hrtimer_run_pending
@@ -1299,41 +1396,29 @@ trace entries
-------------
Having too much or not enough data can be troublesome in diagnosing
-an issue in the kernel. The file trace_entries is used to modify
+an issue in the kernel. The file buffer_size_kb is used to modify
the size of the internal trace buffers. The number listed
is the number of entries that can be recorded per CPU. To know
the full size, multiply the number of possible CPUS with the
number of entries.
- # cat /debug/tracing/trace_entries
-65620
+ # cat /debug/tracing/buffer_size_kb
+1408 (units kilobytes)
Note, to modify this, you must have tracing completely disabled. To do that,
echo "nop" into the current_tracer. If the current_tracer is not set
to "nop", an EINVAL error will be returned.
# echo nop > /debug/tracing/current_tracer
- # echo 100000 > /debug/tracing/trace_entries
- # cat /debug/tracing/trace_entries
-100045
-
-
-Notice that we echoed in 100,000 but the size is 100,045. The entries
-are held in individual pages. It allocates the number of pages it takes
-to fulfill the request. If more entries may fit on the last page
-then they will be added.
-
- # echo 1 > /debug/tracing/trace_entries
- # cat /debug/tracing/trace_entries
-85
-
-This shows us that 85 entries can fit in a single page.
+ # echo 10000 > /debug/tracing/buffer_size_kb
+ # cat /debug/tracing/buffer_size_kb
+10000 (units kilobytes)
The number of pages which will be allocated is limited to a percentage
of available memory. Allocating too much will produce an error.
- # echo 1000000000000 > /debug/tracing/trace_entries
+ # echo 1000000000000 > /debug/tracing/buffer_size_kb
-bash: echo: write error: Cannot allocate memory
- # cat /debug/tracing/trace_entries
+ # cat /debug/tracing/buffer_size_kb
85
diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt
index 7a7753321a263f62c2a00c9d0e348716e701ac2c..51104f9194a54feb64058f4b8f35f3b4d7cbc88f 100644
--- a/Documentation/kbuild/makefiles.txt
+++ b/Documentation/kbuild/makefiles.txt
@@ -383,6 +383,20 @@ more details, with real examples.
to prerequisites are referenced with $(src) (because they are not
generated files).
+ $(kecho)
+ echoing information to user in a rule is often a good practice
+ but when execution "make -s" one does not expect to see any output
+ except for warnings/errors.
+ To support this kbuild define $(kecho) which will echo out the
+ text following $(kecho) to stdout except if "make -s" is used.
+
+ Example:
+ #arch/blackfin/boot/Makefile
+ $(obj)/vmImage: $(obj)/vmlinux.gz
+ $(call if_changed,uimage)
+ @$(kecho) 'Kernel: $@ is ready'
+
+
--- 3.11 $(CC) support functions
The kernel may be built with several different versions of
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index e0f346d201edb70fae654c55f6be842c4465a5ff..a2d8805c03d5588f317a9677add758c94051e6a6 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -89,6 +89,7 @@ parameter is applicable:
SPARC Sparc architecture is enabled.
SWSUSP Software suspend (hibernation) is enabled.
SUSPEND System suspend states are enabled.
+ FTRACE Function tracing enabled.
TS Appropriate touchscreen support is enabled.
USB USB support is enabled.
USBHID USB Human Interface Device support is enabled.
@@ -220,14 +221,17 @@ and is between 256 and 4096 characters. It is defined in the file
Bits in debug_level correspond to a level in
ACPI_DEBUG_PRINT statements, e.g.,
ACPI_DEBUG_PRINT((ACPI_DB_INFO, ...
- See Documentation/acpi/debug.txt for more information
- about debug layers and levels.
+ The debug_level mask defaults to "info". See
+ Documentation/acpi/debug.txt for more information about
+ debug layers and levels.
+ Enable processor driver info messages:
+ acpi.debug_layer=0x20000000
+ Enable PCI/PCI interrupt routing info messages:
+ acpi.debug_layer=0x400000
Enable AML "Debug" output, i.e., stores to the Debug
object while interpreting AML:
acpi.debug_layer=0xffffffff acpi.debug_level=0x2
- Enable PCI/PCI interrupt routing info messages:
- acpi.debug_layer=0x400000 acpi.debug_level=0x4
Enable all messages related to ACPI hardware:
acpi.debug_layer=0x2 acpi.debug_level=0xffffffff
@@ -750,6 +754,14 @@ and is between 256 and 4096 characters. It is defined in the file
parameter will force ia64_sal_cache_flush to call
ia64_pal_cache_flush instead of SAL_CACHE_FLUSH.
+ ftrace=[tracer]
+ [ftrace] will set and start the specified tracer
+ as early as possible in order to facilitate early
+ boot debugging.
+
+ ftrace_dump_on_oops
+ [ftrace] will dump the trace buffers on oops.
+
gamecon.map[2|3]=
[HW,JOY] Multisystem joystick and NES/SNES/PSX pad
support via parallel port (up to 5 devices per port)
@@ -811,6 +823,9 @@ and is between 256 and 4096 characters. It is defined in the file
hlt [BUGS=ARM,SH]
+ hvc_iucv= [S390] Number of z/VM IUCV Hypervisor console (HVC)
+ back-ends. Valid parameters: 0..8
+
i8042.debug [HW] Toggle i8042 debug mode
i8042.direct [HW] Put keyboard port into non-translated mode
i8042.dumbkbd [HW] Pretend that controller can only read data from
@@ -1393,7 +1408,20 @@ and is between 256 and 4096 characters. It is defined in the file
when a NMI is triggered.
Format: [state][,regs][,debounce][,die]
- nmi_watchdog= [KNL,BUGS=X86-32] Debugging features for SMP kernels
+ nmi_watchdog= [KNL,BUGS=X86-32,X86-64] Debugging features for SMP kernels
+ Format: [panic,][num]
+ Valid num: 0,1,2
+ 0 - turn nmi_watchdog off
+ 1 - use the IO-APIC timer for the NMI watchdog
+ 2 - use the local APIC for the NMI watchdog using
+ a performance counter. Note: This will use one performance
+ counter and the local APIC's performance vector.
+ When panic is specified panic when an NMI watchdog timeout occurs.
+ This is useful when you use a panic=... timeout and need the box
+ quickly up again.
+ Instead of 1 and 2 it is possible to use the following
+ symbolic names: lapic and ioapic
+ Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic
no387 [BUGS=X86-32] Tells the kernel to use the 387 maths
emulation library even if a 387 maths coprocessor
@@ -1449,6 +1477,10 @@ and is between 256 and 4096 characters. It is defined in the file
instruction doesn't work correctly and not to
use it.
+ no_file_caps Tells the kernel not to honor file capabilities. The
+ only way then for a file to be executed with privilege
+ is to be setuid root or executed by root.
+
nohalt [IA-64] Tells the kernel not to use the power saving
function PAL_HALT_LIGHT when idle. This increases
power-consumption. On the positive side, it reduces
@@ -1626,6 +1658,17 @@ and is between 256 and 4096 characters. It is defined in the file
nomsi [MSI] If the PCI_MSI kernel config parameter is
enabled, this kernel boot option can be used to
disable the use of MSI interrupts system-wide.
+ noioapicquirk [APIC] Disable all boot interrupt quirks.
+ Safety option to keep boot IRQs enabled. This
+ should never be necessary.
+ ioapicreroute [APIC] Enable rerouting of boot IRQs to the
+ primary IO-APIC for bridges that cannot disable
+ boot IRQs. This fixes a source of spurious IRQs
+ when the system masks IRQs.
+ noioapicreroute [APIC] Disable workaround that uses the
+ boot IRQ equivalent of an IRQ that connects to
+ a chipset where boot IRQs cannot be disabled.
+ The opposite of ioapicreroute.
biosirq [X86-32] Use PCI BIOS calls to get the interrupt
routing table. These calls are known to be buggy
on several machines and they hang the machine
@@ -2165,6 +2208,9 @@ and is between 256 and 4096 characters. It is defined in the file
st= [HW,SCSI] SCSI tape parameters (buffers, etc.)
See Documentation/scsi/st.txt.
+ stacktrace [FTRACE]
+ Enabled the stack tracer on boot up.
+
sti= [PARISC,HW]
Format:
Set the STI (builtin display/keyboard on the HP-PARISC
@@ -2249,12 +2295,27 @@ and is between 256 and 4096 characters. It is defined in the file
See comment before function dc390_setup() in
drivers/scsi/tmscsim.c.
+ topology= [S390]
+ Format: {off | on}
+ Specify if the kernel should make use of the cpu
+ topology informations if the hardware supports these.
+ The scheduler will make use of these informations and
+ e.g. base its process migration decisions on it.
+ Default is off.
+
tp720= [HW,PS2]
trix= [HW,OSS] MediaTrix AudioTrix Pro
Format:
,,,,,,,,
+ tsc= Disable clocksource-must-verify flag for TSC.
+ Format:
+ [x86] reliable: mark tsc clocksource as reliable, this
+ disables clocksource verification at runtime.
+ Used to enable high-resolution timer mode on older
+ hardware, and in virtualized environment.
+
turbografx.map[2|3]= [HW,JOY]
TurboGraFX parallel port interface
Format:
diff --git a/Documentation/markers.txt b/Documentation/markers.txt
index 089f6138fcd94249a6444ca3a932a50c263098e1..d2b3d0e91b26d21423d8202668ac8d512558e7dd 100644
--- a/Documentation/markers.txt
+++ b/Documentation/markers.txt
@@ -51,11 +51,16 @@ to call) for the specific marker through marker_probe_register() and can be
activated by calling marker_arm(). Marker deactivation can be done by calling
marker_disarm() as many times as marker_arm() has been called. Removing a probe
is done through marker_probe_unregister(); it will disarm the probe.
-marker_synchronize_unregister() must be called before the end of the module exit
-function to make sure there is no caller left using the probe. This, and the
-fact that preemption is disabled around the probe call, make sure that probe
-removal and module unload are safe. See the "Probe example" section below for a
-sample probe module.
+
+marker_synchronize_unregister() must be called between probe unregistration and
+the first occurrence of
+- the end of module exit function,
+ to make sure there is no caller left using the probe;
+- the free of any resource used by the probes,
+ to make sure the probes wont be accessing invalid data.
+This, and the fact that preemption is disabled around the probe call, make sure
+that probe removal and module unload are safe. See the "Probe example" section
+below for a sample probe module.
The marker mechanism supports inserting multiple instances of the same marker.
Markers can be put in inline functions, inlined static functions, and
@@ -70,6 +75,20 @@ a printk warning which identifies the inconsistency:
"Format mismatch for probe probe_name (format), marker (format)"
+Another way to use markers is to simply define the marker without generating any
+function call to actually call into the marker. This is useful in combination
+with tracepoint probes in a scheme like this :
+
+void probe_tracepoint_name(unsigned int arg1, struct task_struct *tsk);
+
+DEFINE_MARKER_TP(marker_eventname, tracepoint_name, probe_tracepoint_name,
+ "arg1 %u pid %d");
+
+notrace void probe_tracepoint_name(unsigned int arg1, struct task_struct *tsk)
+{
+ struct marker *marker = &GET_MARKER(kernel_irq_entry);
+ /* write data to trace buffers ... */
+}
* Probe / marker example
diff --git a/Documentation/networking/README.ipw2200 b/Documentation/networking/README.ipw2200
index 4f2a40f1dbc629837463a96695759e3848f41c68..80c728522c4c7a0482d1804689f87869d9c404c0 100644
--- a/Documentation/networking/README.ipw2200
+++ b/Documentation/networking/README.ipw2200
@@ -147,7 +147,7 @@ Where the supported parameter are:
driver. If disabled, the driver will not attempt to scan
for and associate to a network until it has been configured with
one or more properties for the target network, for example configuring
- the network SSID. Default is 1 (auto-associate)
+ the network SSID. Default is 0 (do not auto-associate)
Example: % modprobe ipw2200 associate=0
diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt
index 688dfe1e6b70f75a36d84f30dda2234c53664be0..5ede7473b4251e43e53c5053e144cf12f3d6032a 100644
--- a/Documentation/networking/bonding.txt
+++ b/Documentation/networking/bonding.txt
@@ -194,6 +194,48 @@ or, for backwards compatibility, the option value. E.g.,
The parameters are as follows:
+ad_select
+
+ Specifies the 802.3ad aggregation selection logic to use. The
+ possible values and their effects are:
+
+ stable or 0
+
+ The active aggregator is chosen by largest aggregate
+ bandwidth.
+
+ Reselection of the active aggregator occurs only when all
+ slaves of the active aggregator are down or the active
+ aggregator has no slaves.
+
+ This is the default value.
+
+ bandwidth or 1
+
+ The active aggregator is chosen by largest aggregate
+ bandwidth. Reselection occurs if:
+
+ - A slave is added to or removed from the bond
+
+ - Any slave's link state changes
+
+ - Any slave's 802.3ad association state changes
+
+ - The bond's adminstrative state changes to up
+
+ count or 2
+
+ The active aggregator is chosen by the largest number of
+ ports (slaves). Reselection occurs as described under the
+ "bandwidth" setting, above.
+
+ The bandwidth and count selection policies permit failover of
+ 802.3ad aggregations when partial failure of the active aggregator
+ occurs. This keeps the aggregator with the highest availability
+ (either in bandwidth or in number of ports) active at all times.
+
+ This option was added in bonding version 3.4.0.
+
arp_interval
Specifies the ARP link monitoring frequency in milliseconds.
@@ -551,6 +593,16 @@ num_grat_arp
affects only the active-backup mode. This option was added for
bonding version 3.3.0.
+num_unsol_na
+
+ Specifies the number of unsolicited IPv6 Neighbor Advertisements
+ to be issued after a failover event. One unsolicited NA is issued
+ immediately after the failover.
+
+ The valid range is 0 - 255; the default value is 1. This option
+ affects only the active-backup mode. This option was added for
+ bonding version 3.4.0.
+
primary
A string (eth0, eth2, etc) specifying which slave is the
@@ -922,17 +974,19 @@ USERCTL=no
NETMASK, NETWORK and BROADCAST) to match your network configuration.
For later versions of initscripts, such as that found with Fedora
-7 and Red Hat Enterprise Linux version 5 (or later), it is possible, and,
-indeed, preferable, to specify the bonding options in the ifcfg-bond0
+7 (or later) and Red Hat Enterprise Linux version 5 (or later), it is possible,
+and, indeed, preferable, to specify the bonding options in the ifcfg-bond0
file, e.g. a line of the format:
-BONDING_OPTS="mode=active-backup arp_interval=60 arp_ip_target=+192.168.1.254"
+BONDING_OPTS="mode=active-backup arp_interval=60 arp_ip_target=192.168.1.254"
will configure the bond with the specified options. The options
specified in BONDING_OPTS are identical to the bonding module parameters
-except for the arp_ip_target field. Each target should be included as a
-separate option and should be preceded by a '+' to indicate it should be
-added to the list of queried targets, e.g.,
+except for the arp_ip_target field when using versions of initscripts older
+than and 8.57 (Fedora 8) and 8.45.19 (Red Hat Enterprise Linux 5.2). When
+using older versions each target should be included as a separate option and
+should be preceded by a '+' to indicate it should be added to the list of
+queried targets, e.g.,
arp_ip_target=+192.168.1.1 arp_ip_target=+192.168.1.2
@@ -940,7 +994,7 @@ added to the list of queried targets, e.g.,
options via BONDING_OPTS, it is not necessary to edit /etc/modules.conf or
/etc/modprobe.conf.
- For older versions of initscripts that do not support
+ For even older versions of initscripts that do not support
BONDING_OPTS, it is necessary to edit /etc/modules.conf (or
/etc/modprobe.conf, depending upon your distro) to load the bonding module
with your desired options when the bond0 interface is brought up. The
diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt
index 39131a3c78f8826bb9949ddf25ff50e591904028..7a3bb1abb8304a1fe7222e354e43164a7a7635bb 100644
--- a/Documentation/networking/dccp.txt
+++ b/Documentation/networking/dccp.txt
@@ -57,6 +57,24 @@ can be set before calling bind().
DCCP_SOCKOPT_GET_CUR_MPS is read-only and retrieves the current maximum packet
size (application payload size) in bytes, see RFC 4340, section 14.
+DCCP_SOCKOPT_AVAILABLE_CCIDS is also read-only and returns the list of CCIDs
+supported by the endpoint (see include/linux/dccp.h for symbolic constants).
+The caller needs to provide a sufficiently large (> 2) array of type uint8_t.
+
+DCCP_SOCKOPT_CCID is write-only and sets both the TX and RX CCIDs at the same
+time, combining the operation of the next two socket options. This option is
+preferrable over the latter two, since often applications will use the same
+type of CCID for both directions; and mixed use of CCIDs is not currently well
+understood. This socket option takes as argument at least one uint8_t value, or
+an array of uint8_t values, which must match available CCIDS (see above). CCIDs
+must be registered on the socket before calling connect() or listen().
+
+DCCP_SOCKOPT_TX_CCID is read/write. It returns the current CCID (if set) or sets
+the preference list for the TX CCID, using the same format as DCCP_SOCKOPT_CCID.
+Please note that the getsockopt argument type here is `int', not uint8_t.
+
+DCCP_SOCKOPT_RX_CCID is analogous to DCCP_SOCKOPT_TX_CCID, but for the RX CCID.
+
DCCP_SOCKOPT_SERVER_TIMEWAIT enables the server (listening socket) to hold
timewait state when closing the connection (RFC 4340, 8.3). The usual case is
that the closing server sends a CloseReq, whereupon the client holds timewait
@@ -115,20 +133,12 @@ retries2
importance for retransmitted acknowledgments and feature negotiation,
data packets are never retransmitted. Analogue of tcp_retries2.
-send_ndp = 1
- Whether or not to send NDP count options (sec. 7.7.2).
-
-send_ackvec = 1
- Whether or not to send Ack Vector options (sec. 11.5).
-
-ack_ratio = 2
- The default Ack Ratio (sec. 11.3) to use.
-
tx_ccid = 2
- Default CCID for the sender-receiver half-connection.
+ Default CCID for the sender-receiver half-connection. Depending on the
+ choice of CCID, the Send Ack Vector feature is enabled automatically.
rx_ccid = 2
- Default CCID for the receiver-sender half-connection.
+ Default CCID for the receiver-sender half-connection; see tx_ccid.
seq_window = 100
The initial sequence window (sec. 7.5.2).
diff --git a/Documentation/networking/driver.txt b/Documentation/networking/driver.txt
index ea72d2e66ca81a62fa493b695ed0e5cf94fc92a4..03283daa64fef72360667fb979a256aa10a3bb91 100644
--- a/Documentation/networking/driver.txt
+++ b/Documentation/networking/driver.txt
@@ -13,7 +13,7 @@ Transmit path guidelines:
static int drv_hard_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
- struct drv *dp = dev->priv;
+ struct drv *dp = netdev_priv(dev);
lock_tx(dp);
...
diff --git a/Documentation/networking/generic-hdlc.txt b/Documentation/networking/generic-hdlc.txt
index 31bc8b759b755e03875426f3678e92e86a022b33..4eb3cc40b702e33d7fa6f059555a2d7876c7a981 100644
--- a/Documentation/networking/generic-hdlc.txt
+++ b/Documentation/networking/generic-hdlc.txt
@@ -3,15 +3,15 @@ Krzysztof Halasa
Generic HDLC layer currently supports:
-1. Frame Relay (ANSI, CCITT, Cisco and no LMI).
+1. Frame Relay (ANSI, CCITT, Cisco and no LMI)
- Normal (routed) and Ethernet-bridged (Ethernet device emulation)
interfaces can share a single PVC.
- ARP support (no InARP support in the kernel - there is an
experimental InARP user-space daemon available on:
http://www.kernel.org/pub/linux/utils/net/hdlc/).
-2. raw HDLC - either IP (IPv4) interface or Ethernet device emulation.
-3. Cisco HDLC.
-4. PPP (uses syncppp.c).
+2. raw HDLC - either IP (IPv4) interface or Ethernet device emulation
+3. Cisco HDLC
+4. PPP
5. X.25 (uses X.25 routines).
Generic HDLC is a protocol driver only - it needs a low-level driver
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index d84932650fd3e926cc11d5fa0bcaee6cc8a8cd33..c7712787933c1734c98a0191db23d9cb2886d0f8 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -27,6 +27,12 @@ min_adv_mss - INTEGER
The advertised MSS depends on the first hop route MTU, but will
never be lower than this setting.
+rt_cache_rebuild_count - INTEGER
+ The per net-namespace route cache emergency rebuild threshold.
+ Any net-namespace having its route cache rebuilt due to
+ a hash bucket chain being too long more than this many times
+ will have its route caching disabled
+
IP Fragmentation:
ipfrag_high_thresh - INTEGER
diff --git a/Documentation/networking/mac80211_hwsim/README b/Documentation/networking/mac80211_hwsim/README
index 2ff8ccb8dc3715dd343c5229b8c6ded98dde7d03..24ac91d56698d626fb266556c5b0c3b9fd212fa9 100644
--- a/Documentation/networking/mac80211_hwsim/README
+++ b/Documentation/networking/mac80211_hwsim/README
@@ -50,10 +50,6 @@ associates with the AP. hostapd and wpa_supplicant are used to take
care of WPA2-PSK authentication. In addition, hostapd is also
processing access point side of association.
-Please note that the current Linux kernel does not enable AP mode, so a
-simple patch is needed to enable AP mode selection:
-http://johannes.sipsolutions.net/patches/kernel/all/LATEST/006-allow-ap-vlan-modes.patch
-
# Build mac80211_hwsim as part of kernel configuration
@@ -65,3 +61,8 @@ hostapd hostapd.conf
# Run wpa_supplicant (station) for wlan1
wpa_supplicant -Dwext -iwlan1 -c wpa_supplicant.conf
+
+
+More test cases are available in hostap.git:
+git://w1.fi/srv/git/hostap.git and mac80211_hwsim/tests subdirectory
+(http://w1.fi/gitweb/gitweb.cgi?p=hostap.git;a=tree;f=mac80211_hwsim/tests)
diff --git a/Documentation/networking/netdevices.txt b/Documentation/networking/netdevices.txt
index d0f71fc7f7829b1dfb9dfc689afe0978bec53c76..a2ab6a0b116d96ff8e6198154d5f455cac2fec5e 100644
--- a/Documentation/networking/netdevices.txt
+++ b/Documentation/networking/netdevices.txt
@@ -18,7 +18,7 @@ There are routines in net_init.c to handle the common cases of
alloc_etherdev, alloc_netdev. These reserve extra space for driver
private data which gets freed when the network device is freed. If
separately allocated data is attached to the network device
-(dev->priv) then it is up to the module exit handler to free that.
+(netdev_priv(dev)) then it is up to the module exit handler to free that.
MTU
===
diff --git a/Documentation/networking/regulatory.txt b/Documentation/networking/regulatory.txt
index a96989a8ff351c0a409187819175461cfa44f456..dcf31648414ad8423e934851bea5ee38b0d09f2f 100644
--- a/Documentation/networking/regulatory.txt
+++ b/Documentation/networking/regulatory.txt
@@ -131,11 +131,13 @@ are expected to do this during initialization.
r = zd_reg2alpha2(mac->regdomain, alpha2);
if (!r)
- regulatory_hint(hw->wiphy, alpha2, NULL);
+ regulatory_hint(hw->wiphy, alpha2);
Example code - drivers providing a built in regulatory domain:
--------------------------------------------------------------
+[NOTE: This API is not currently available, it can be added when required]
+
If you have regulatory information you can obtain from your
driver and you *need* to use this we let you build a regulatory domain
structure and pass it to the wireless core. To do this you should
@@ -167,7 +169,6 @@ struct ieee80211_regdomain mydriver_jp_regdom = {
Then in some part of your code after your wiphy has been registered:
- int r;
struct ieee80211_regdomain *rd;
int size_of_regd;
int num_rules = mydriver_jp_regdom.n_reg_rules;
@@ -178,17 +179,12 @@ Then in some part of your code after your wiphy has been registered:
rd = kzalloc(size_of_regd, GFP_KERNEL);
if (!rd)
- return -ENOMEM;
+ return -ENOMEM;
memcpy(rd, &mydriver_jp_regdom, sizeof(struct ieee80211_regdomain));
- for (i=0; i < num_rules; i++) {
- memcpy(&rd->reg_rules[i], &mydriver_jp_regdom.reg_rules[i],
- sizeof(struct ieee80211_reg_rule));
- }
- r = regulatory_hint(hw->wiphy, NULL, rd);
- if (r) {
- kfree(rd);
- return r;
- }
-
+ for (i=0; i < num_rules; i++)
+ memcpy(&rd->reg_rules[i],
+ &mydriver_jp_regdom.reg_rules[i],
+ sizeof(struct ieee80211_reg_rule));
+ regulatory_struct_hint(rd);
diff --git a/Documentation/nmi_watchdog.txt b/Documentation/nmi_watchdog.txt
index 90aa4531cb67343b03b396610aa0db77c1d1e0ba..bf9f80a982829ae06062e9cc118762335936ad4a 100644
--- a/Documentation/nmi_watchdog.txt
+++ b/Documentation/nmi_watchdog.txt
@@ -69,6 +69,11 @@ to the overall system performance.
On x86 nmi_watchdog is disabled by default so you have to enable it with
a boot time parameter.
+It's possible to disable the NMI watchdog in run-time by writing "0" to
+/proc/sys/kernel/nmi_watchdog. Writing "1" to the same file will re-enable
+the NMI watchdog. Notice that you still need to use "nmi_watchdog=" parameter
+at boot time.
+
NOTE: In kernels prior to 2.4.2-ac18 the NMI-oopser is enabled unconditionally
on x86 SMP boxes.
diff --git a/Documentation/powerpc/dts-bindings/fsl/tsec.txt b/Documentation/powerpc/dts-bindings/fsl/tsec.txt
index cf55fa4112d2736de01e0989c5f11d417346326a..7fa4b27574b5f54aabb1c9839e61fcf9f053c0ad 100644
--- a/Documentation/powerpc/dts-bindings/fsl/tsec.txt
+++ b/Documentation/powerpc/dts-bindings/fsl/tsec.txt
@@ -2,8 +2,8 @@
The MDIO is a bus to which the PHY devices are connected. For each
device that exists on this bus, a child node should be created. See
-the definition of the PHY node below for an example of how to define
-a PHY.
+the definition of the PHY node in booting-without-of.txt for an example
+of how to define a PHY.
Required properties:
- reg : Offset and length of the register set for the device
@@ -21,6 +21,14 @@ Example:
};
};
+* TBI Internal MDIO bus
+
+As of this writing, every tsec is associated with an internal TBI PHY.
+This PHY is accessed through the local MDIO bus. These buses are defined
+similarly to the mdio buses, except they are compatible with "fsl,gianfar-tbi".
+The TBI PHYs underneath them are similar to normal PHYs, but the reg property
+is considered instructive, rather than descriptive. The reg property should
+be chosen so it doesn't interfere with other PHYs on the bus.
* Gianfar-compatible ethernet nodes
diff --git a/Documentation/rfkill.txt b/Documentation/rfkill.txt
index b65f0799df485dfea9d0346a3d3ede5c7fc5afba..4d3ee317a4a3e84181047ab417a3e2a88c4995bc 100644
--- a/Documentation/rfkill.txt
+++ b/Documentation/rfkill.txt
@@ -191,12 +191,20 @@ Userspace input handlers (uevents) or kernel input handlers (rfkill-input):
to tell the devices registered with the rfkill class to change
their state (i.e. translates the input layer event into real
action).
+
* rfkill-input implements EPO by handling EV_SW SW_RFKILL_ALL 0
(power off all transmitters) in a special way: it ignores any
overrides and local state cache and forces all transmitters to the
RFKILL_STATE_SOFT_BLOCKED state (including those which are already
- supposed to be BLOCKED). Note that the opposite event (power on all
- transmitters) is handled normally.
+ supposed to be BLOCKED).
+ * rfkill EPO will remain active until rfkill-input receives an
+ EV_SW SW_RFKILL_ALL 1 event. While the EPO is active, transmitters
+ are locked in the blocked state (rfkill will refuse to unblock them).
+ * rfkill-input implements different policies that the user can
+ select for handling EV_SW SW_RFKILL_ALL 1. It will unlock rfkill,
+ and either do nothing (leave transmitters blocked, but now unlocked),
+ restore the transmitters to their state before the EPO, or unblock
+ them all.
Userspace uevent handler or kernel platform-specific drivers hooked to the
rfkill notifier chain:
@@ -331,11 +339,9 @@ class to get a sysfs interface :-)
correct event for your switch/button. These events are emergency power-off
events when they are trying to turn the transmitters off. An example of an
input device which SHOULD generate *_RFKILL_ALL events is the wireless-kill
-switch in a laptop which is NOT a hotkey, but a real switch that kills radios
-in hardware, even if the O.S. has gone to lunch. An example of an input device
-which SHOULD NOT generate *_RFKILL_ALL events by default, is any sort of hot
-key that does nothing by itself, as well as any hot key that is type-specific
-(e.g. the one for WLAN).
+switch in a laptop which is NOT a hotkey, but a real sliding/rocker switch.
+An example of an input device which SHOULD NOT generate *_RFKILL_ALL events by
+default, is any sort of hot key that is type-specific (e.g. the one for WLAN).
3.1 Guidelines for wireless device drivers
diff --git a/Documentation/scheduler/sched-arch.txt b/Documentation/scheduler/sched-arch.txt
index 941615a9769b91ea0cee31723023c600645db67d..d43dbcbd163b4d45e3479614149c780b5e12778f 100644
--- a/Documentation/scheduler/sched-arch.txt
+++ b/Documentation/scheduler/sched-arch.txt
@@ -8,7 +8,7 @@ Context switch
By default, the switch_to arch function is called with the runqueue
locked. This is usually not a problem unless switch_to may need to
take the runqueue lock. This is usually due to a wake up operation in
-the context switch. See include/asm-ia64/system.h for an example.
+the context switch. See arch/ia64/include/asm/system.h for an example.
To request the scheduler call switch_to with the runqueue unlocked,
you must `#define __ARCH_WANT_UNLOCKED_CTXSW` in a header file
@@ -23,7 +23,7 @@ disabled. Interrupts may be enabled over the call if it is likely to
introduce a significant interrupt latency by adding the line
`#define __ARCH_WANT_INTERRUPTS_ON_CTXSW` in the same place as for
unlocked context switches. This define also implies
-`__ARCH_WANT_UNLOCKED_CTXSW`. See include/asm-arm/system.h for an
+`__ARCH_WANT_UNLOCKED_CTXSW`. See arch/arm/include/asm/system.h for an
example.
diff --git a/Documentation/scheduler/sched-design-CFS.txt b/Documentation/scheduler/sched-design-CFS.txt
index eb471c7a905eda60bc83cbf9eeb03e807356606b..8398ca4ff4ede1e4671f334bdb417e4787593aec 100644
--- a/Documentation/scheduler/sched-design-CFS.txt
+++ b/Documentation/scheduler/sched-design-CFS.txt
@@ -273,3 +273,24 @@ task groups and modify their CPU share using the "cgroups" pseudo filesystem.
# #Launch gmplayer (or your favourite movie player)
# echo > multimedia/tasks
+
+8. Implementation note: user namespaces
+
+User namespaces are intended to be hierarchical. But they are currently
+only partially implemented. Each of those has ramifications for CFS.
+
+First, since user namespaces are hierarchical, the /sys/kernel/uids
+presentation is inadequate. Eventually we will likely want to use sysfs
+tagging to provide private views of /sys/kernel/uids within each user
+namespace.
+
+Second, the hierarchical nature is intended to support completely
+unprivileged use of user namespaces. So if using user groups, then
+we want the users in a user namespace to be children of the user
+who created it.
+
+That is currently unimplemented. So instead, every user in a new
+user namespace will receive 1024 shares just like any user in the
+initial user namespace. Note that at the moment creation of a new
+user namespace requires each of CAP_SYS_ADMIN, CAP_SETUID, and
+CAP_SETGID.
diff --git a/Documentation/sh/kgdb.txt b/Documentation/sh/kgdb.txt
deleted file mode 100644
index 05b4ba89d28ca27f4cde52797475d9f8e13caf7e..0000000000000000000000000000000000000000
--- a/Documentation/sh/kgdb.txt
+++ /dev/null
@@ -1,179 +0,0 @@
-
-This file describes the configuration and behavior of KGDB for the SH
-kernel. Based on a description from Henry Bell , it
-has been modified to account for quirks in the current implementation.
-
-Version
-=======
-
-This version of KGDB was written for 2.4.xx kernels for the SH architecture.
-Further documentation is available from the linux-sh project website.
-
-
-Debugging Setup: Host
-======================
-
-The two machines will be connected together via a serial line - this
-should be a null modem cable i.e. with a twist.
-
-On your DEVELOPMENT machine, go to your kernel source directory and
-build the kernel, enabling KGDB support in the "kernel hacking" section.
-This includes the KGDB code, and also makes the kernel be compiled with
-the "-g" option set -- necessary for debugging.
-
-To install this new kernel, use the following installation procedure.
-
-Decide on which tty port you want the machines to communicate, then
-cable them up back-to-back using the null modem. On the DEVELOPMENT
-machine, you may wish to create an initialization file called .gdbinit
-(in the kernel source directory or in your home directory) to execute
-commonly-used commands at startup.
-
-A minimal .gdbinit might look like this:
-
- file vmlinux
- set remotebaud 115200
- target remote /dev/ttyS0
-
-Change the "target" definition so that it specifies the tty port that
-you intend to use. Change the "remotebaud" definition to match the
-data rate that you are going to use for the com line (115200 is the
-default).
-
-Debugging Setup: Target
-========================
-
-By default, the KGDB stub will communicate with the host GDB using
-ttySC1 at 115200 baud, 8 databits, no parity; these defaults can be
-changed in the kernel configuration. As the kernel starts up, KGDB will
-initialize so that breakpoints, kernel segfaults, and so forth will
-generally enter the debugger.
-
-This behavior can be modified by including the "kgdb" option in the
-kernel command line; this option has the general form:
-
- kgdb=,
-
-The indicates the port to use, and can optionally specify
-baud, parity and databits -- e.g. "ttySC0,9600N8" or "ttySC1,19200".
-
-The can be "halt" or "disabled". The "halt" action enters the
-debugger via a breakpoint as soon as kgdb is initialized; the "disabled"
-action causes kgdb to ignore kernel segfaults and such until explicitly
-entered by a breakpoint in the code or by external action (sysrq or NMI).
-
-(Both and can appear alone, w/o the separating comma.)
-
-For example, if you wish to debug early in kernel startup code, you
-might specify the halt option:
-
- kgdb=halt
-
-Boot the TARGET machine, which will appear to hang.
-
-On your DEVELOPMENT machine, cd to the source directory and run the gdb
-program. (This is likely to be a cross GDB which runs on your host but
-is built for an SH target.) If everything is working correctly you
-should see gdb print out a few lines indicating that a breakpoint has
-been taken. It will actually show a line of code in the target kernel
-inside the gdbstub activation code.
-
-NOTE: BE SURE TO TERMINATE OR SUSPEND any other host application which
-may be using the same serial port (for example, a terminal emulator you
-have been using to connect to the target boot code.) Otherwise, data
-from the target may not all get to GDB!
-
-You can now use whatever gdb commands you like to set breakpoints.
-Enter "continue" to start your target machine executing again. At this
-point the target system will run at full speed until it encounters
-your breakpoint or gets a segment violation in the kernel, or whatever.
-
-Serial Ports: KGDB, Console
-============================
-
-This version of KGDB may not gracefully handle conflict with other
-drivers in the kernel using the same port. If KGDB is configured on the
-same port (and with the same parameters) as the kernel console, or if
-CONFIG_SH_KGDB_CONSOLE is configured, things should be fine (though in
-some cases console messages may appear twice through GDB). But if the
-KGDB port is not the kernel console and used by another serial driver
-which assumes different serial parameters (e.g. baud rate) KGDB may not
-recover.
-
-Also, when KGDB is entered via sysrq-g (requires CONFIG_KGDB_SYSRQ) and
-the kgdb port uses the same port as the console, detaching GDB will not
-restore the console to working order without the port being re-opened.
-
-Another serious consequence of this is that GDB currently CANNOT break
-into KGDB externally (e.g. via ^C or ); unless a breakpoint or
-error is encountered, the only way to enter KGDB after the initial halt
-(see above) is via NMI (CONFIG_KGDB_NMI) or sysrq-g (CONFIG_KGDB_SYSRQ).
-
-Code is included for the basic Hitachi Solution Engine boards to allow
-the use of ttyS0 for KGDB if desired; this is less robust, but may be
-useful in some cases. (This cannot be selected using the config file,
-but only through the kernel command line, e.g. "kgdb=ttyS0", though the
-configured defaults for baud rate etc. still apply if not overridden.)
-
-If gdbstub Does Not Work
-========================
-
-If it doesn't work, you will have to troubleshoot it. Do the easy
-things first like double checking your cabling and data rates. You
-might try some non-kernel based programs to see if the back-to-back
-connection works properly. Just something simple like cat /etc/hosts
-/dev/ttyS0 on one machine and cat /dev/ttyS0 on the other will tell you
-if you can send data from one machine to the other. There is no point
-in tearing out your hair in the kernel if the line doesn't work.
-
-If you need to debug the GDB/KGDB communication itself, the gdb commands
-"set debug remote 1" and "set debug serial 1" may be useful, but be
-warned: they produce a lot of output.
-
-Threads
-=======
-
-Each process in a target machine is seen as a gdb thread. gdb thread related
-commands (info threads, thread n) can be used. CONFIG_KGDB_THREAD must
-be defined for this to work.
-
-In this version, kgdb reports PID_MAX (32768) as the process ID for the
-idle process (pid 0), since GDB does not accept 0 as an ID.
-
-Detaching (exiting KGDB)
-=========================
-
-There are two ways to resume full-speed target execution: "continue" and
-"detach". With "continue", GDB inserts any specified breakpoints in the
-target code and resumes execution; the target is still in "gdb mode".
-If a breakpoint or other debug event (e.g. NMI) happens, the target
-halts and communicates with GDB again, which is waiting for it.
-
-With "detach", GDB does *not* insert any breakpoints; target execution
-is resumed and GDB stops communicating (does not wait for the target).
-In this case, the target is no longer in "gdb mode" -- for example,
-console messages no longer get sent separately to the KGDB port, or
-encapsulated for GDB. If a debug event (e.g. NMI) occurs, the target
-will re-enter "gdb mode" and will display this fact on the console; you
-must give a new "target remote" command to gdb.
-
-NOTE: TO AVOID LOSSING CONSOLE MESSAGES IN CASE THE KERNEL CONSOLE AND
-KGDB USING THE SAME PORT, THE TARGET WAITS FOR ANY INPUT CHARACTER ON
-THE KGDB PORT AFTER A DETACH COMMAND. For example, after the detach you
-could start a terminal emulator on the same host port and enter a ;
-however, this program must then be terminated or suspended in order to
-use GBD again if KGDB is re-entered.
-
-
-Acknowledgements
-================
-
-This code was mostly generated by Henry Bell ;
-largely from KGDB by Amit S. Kale - extracts from
-code by Glenn Engel, Jim Kingdon, David Grothe , Tigran
-Aivazian , William Gatliff , Ben
-Lee, Steve Chamberlain and Benoit Miller are also
-included.
-
-Jeremy Siegel
-
diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt
index 394d7d378dc74daf6899621d2bca0c37cdd598cf..841a9365d5fdd67b5018c7551ff7bb2433056c8a 100644
--- a/Documentation/sound/alsa/ALSA-Configuration.txt
+++ b/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -757,6 +757,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
model - force the model name
position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF)
probe_mask - Bitmask to probe codecs (default = -1, meaning all slots)
+ probe_only - Only probing and no codec initialization (default=off);
+ Useful to check the initial codec status for debugging
bdl_pos_adj - Specifies the DMA IRQ timing delay in samples.
Passing -1 will make the driver to choose the appropriate
value based on the controller chip.
@@ -772,327 +774,23 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
This module supports multiple cards and autoprobe.
+ See Documentation/sound/alsa/HD-Audio.txt for more details about
+ HD-audio driver.
+
Each codec may have a model table for different configurations.
If your machine isn't listed there, the default (usually minimal)
configuration is set up. You can pass "model=" option to
specify a certain model in such a case. There are different
- models depending on the codec chip.
-
- Model name Description
- ---------- -----------
- ALC880
- 3stack 3-jack in back and a headphone out
- 3stack-digout 3-jack in back, a HP out and a SPDIF out
- 5stack 5-jack in back, 2-jack in front
- 5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
- 6stack 6-jack in back, 2-jack in front
- 6stack-digout 6-jack with a SPDIF out
- w810 3-jack
- z71v 3-jack (HP shared SPDIF)
- asus 3-jack (ASUS Mobo)
- asus-w1v ASUS W1V
- asus-dig ASUS with SPDIF out
- asus-dig2 ASUS with SPDIF out (using GPIO2)
- uniwill 3-jack
- fujitsu Fujitsu Laptops (Pi1536)
- F1734 2-jack
- lg LG laptop (m1 express dual)
- lg-lw LG LW20/LW25 laptop
- tcl TCL S700
- clevo Clevo laptops (m520G, m665n)
- medion Medion Rim 2150
- test for testing/debugging purpose, almost all controls can be
- adjusted. Appearing only when compiled with
- $CONFIG_SND_DEBUG=y
- auto auto-config reading BIOS (default)
-
- ALC260
- hp HP machines
- hp-3013 HP machines (3013-variant)
- hp-dc7600 HP DC7600
- fujitsu Fujitsu S7020
- acer Acer TravelMate
- will Will laptops (PB V7900)
- replacer Replacer 672V
- basic fixed pin assignment (old default model)
- test for testing/debugging purpose, almost all controls can
- adjusted. Appearing only when compiled with
- $CONFIG_SND_DEBUG=y
- auto auto-config reading BIOS (default)
-
- ALC262
- fujitsu Fujitsu Laptop
- hp-bpc HP xw4400/6400/8400/9400 laptops
- hp-bpc-d7000 HP BPC D7000
- hp-tc-t5735 HP Thin Client T5735
- hp-rp5700 HP RP5700
- benq Benq ED8
- benq-t31 Benq T31
- hippo Hippo (ATI) with jack detection, Sony UX-90s
- hippo_1 Hippo (Benq) with jack detection
- sony-assamd Sony ASSAMD
- toshiba-s06 Toshiba S06
- toshiba-rx1 Toshiba RX1
- ultra Samsung Q1 Ultra Vista model
- lenovo-3000 Lenovo 3000 y410
- nec NEC Versa S9100
- basic fixed pin assignment w/o SPDIF
- auto auto-config reading BIOS (default)
-
- ALC267/268
- quanta-il1 Quanta IL1 mini-notebook
- 3stack 3-stack model
- toshiba Toshiba A205
- acer Acer laptops
- acer-aspire Acer Aspire One
- dell Dell OEM laptops (Vostro 1200)
- zepto Zepto laptops
- test for testing/debugging purpose, almost all controls can
- adjusted. Appearing only when compiled with
- $CONFIG_SND_DEBUG=y
- auto auto-config reading BIOS (default)
-
- ALC269
- basic Basic preset
- quanta Quanta FL1
- eeepc-p703 ASUS Eeepc P703 P900A
- eeepc-p901 ASUS Eeepc P901 S101
-
- ALC662/663
- 3stack-dig 3-stack (2-channel) with SPDIF
- 3stack-6ch 3-stack (6-channel)
- 3stack-6ch-dig 3-stack (6-channel) with SPDIF
- 6stack-dig 6-stack with SPDIF
- lenovo-101e Lenovo laptop
- eeepc-p701 ASUS Eeepc P701
- eeepc-ep20 ASUS Eeepc EP20
- ecs ECS/Foxconn mobo
- m51va ASUS M51VA
- g71v ASUS G71V
- h13 ASUS H13
- g50v ASUS G50V
- asus-mode1 ASUS
- asus-mode2 ASUS
- asus-mode3 ASUS
- asus-mode4 ASUS
- asus-mode5 ASUS
- asus-mode6 ASUS
- auto auto-config reading BIOS (default)
-
- ALC882/885
- 3stack-dig 3-jack with SPDIF I/O
- 6stack-dig 6-jack digital with SPDIF I/O
- arima Arima W820Di1
- targa Targa T8, MSI-1049 T8
- asus-a7j ASUS A7J
- asus-a7m ASUS A7M
- macpro MacPro support
- mbp3 Macbook Pro rev3
- imac24 iMac 24'' with jack detection
- w2jc ASUS W2JC
- auto auto-config reading BIOS (default)
-
- ALC883/888
- 3stack-dig 3-jack with SPDIF I/O
- 6stack-dig 6-jack digital with SPDIF I/O
- 3stack-6ch 3-jack 6-channel
- 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
- 6stack-dig-demo 6-jack digital for Intel demo board
- acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
- acer-aspire Acer Aspire 9810
- medion Medion Laptops
- medion-md2 Medion MD2
- targa-dig Targa/MSI
- targa-2ch-dig Targs/MSI with 2-channel
- laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
- lenovo-101e Lenovo 101E
- lenovo-nb0763 Lenovo NB0763
- lenovo-ms7195-dig Lenovo MS7195
- lenovo-sky Lenovo Sky
- haier-w66 Haier W66
- 3stack-hp HP machines with 3stack (Lucknow, Samba boards)
- 6stack-dell Dell machines with 6stack (Inspiron 530)
- mitac Mitac 8252D
- clevo-m720 Clevo M720 laptop series
- fujitsu-pi2515 Fujitsu AMILO Pi2515
- 3stack-6ch-intel Intel DG33* boards
- auto auto-config reading BIOS (default)
-
- ALC861/660
- 3stack 3-jack
- 3stack-dig 3-jack with SPDIF I/O
- 6stack-dig 6-jack with SPDIF I/O
- 3stack-660 3-jack (for ALC660)
- uniwill-m31 Uniwill M31 laptop
- toshiba Toshiba laptop support
- asus Asus laptop support
- asus-laptop ASUS F2/F3 laptops
- auto auto-config reading BIOS (default)
-
- ALC861VD/660VD
- 3stack 3-jack
- 3stack-dig 3-jack with SPDIF OUT
- 6stack-dig 6-jack with SPDIF OUT
- 3stack-660 3-jack (for ALC660VD)
- 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD)
- lenovo Lenovo 3000 C200
- dallas Dallas laptops
- hp HP TX1000
- auto auto-config reading BIOS (default)
-
- CMI9880
- minimal 3-jack in back
- min_fp 3-jack in back, 2-jack in front
- full 6-jack in back, 2-jack in front
- full_dig 6-jack in back, 2-jack in front, SPDIF I/O
- allout 5-jack in back, 2-jack in front, SPDIF out
- auto auto-config reading BIOS (default)
-
- AD1882 / AD1882A
- 3stack 3-stack mode (default)
- 6stack 6-stack mode
-
- AD1884A / AD1883 / AD1984A / AD1984B
- desktop 3-stack desktop (default)
- laptop laptop with HP jack sensing
- mobile mobile devices with HP jack sensing
- thinkpad Lenovo Thinkpad X300
-
- AD1884
- N/A
-
- AD1981
- basic 3-jack (default)
- hp HP nx6320
- thinkpad Lenovo Thinkpad T60/X60/Z60
- toshiba Toshiba U205
-
- AD1983
- N/A
-
- AD1984
- basic default configuration
- thinkpad Lenovo Thinkpad T61/X61
- dell Dell T3400
-
- AD1986A
- 6stack 6-jack, separate surrounds (default)
- 3stack 3-stack, shared surrounds
- laptop 2-channel only (FSC V2060, Samsung M50)
- laptop-eapd 2-channel with EAPD (Samsung R65, ASUS A6J)
- laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
- ultra 2-channel with EAPD (Samsung Ultra tablet PC)
-
- AD1988/AD1988B/AD1989A/AD1989B
- 6stack 6-jack
- 6stack-dig ditto with SPDIF
- 3stack 3-jack
- 3stack-dig ditto with SPDIF
- laptop 3-jack with hp-jack automute
- laptop-dig ditto with SPDIF
- auto auto-config reading BIOS (default)
-
- Conexant 5045
- laptop-hpsense Laptop with HP sense (old model laptop)
- laptop-micsense Laptop with Mic sense (old model fujitsu)
- laptop-hpmicsense Laptop with HP and Mic senses
- benq Benq R55E
- test for testing/debugging purpose, almost all controls
- can be adjusted. Appearing only when compiled with
- $CONFIG_SND_DEBUG=y
-
- Conexant 5047
- laptop Basic Laptop config
- laptop-hp Laptop config for some HP models (subdevice 30A5)
- laptop-eapd Laptop config with EAPD support
- test for testing/debugging purpose, almost all controls
- can be adjusted. Appearing only when compiled with
- $CONFIG_SND_DEBUG=y
-
- Conexant 5051
- laptop Basic Laptop config (default)
- hp HP Spartan laptop
-
- STAC9200
- ref Reference board
- dell-d21 Dell (unknown)
- dell-d22 Dell (unknown)
- dell-d23 Dell (unknown)
- dell-m21 Dell Inspiron 630m, Dell Inspiron 640m
- dell-m22 Dell Latitude D620, Dell Latitude D820
- dell-m23 Dell XPS M1710, Dell Precision M90
- dell-m24 Dell Latitude 120L
- dell-m25 Dell Inspiron E1505n
- dell-m26 Dell Inspiron 1501
- dell-m27 Dell Inspiron E1705/9400
- gateway Gateway laptops with EAPD control
- panasonic Panasonic CF-74
-
- STAC9205/9254
- ref Reference board
- dell-m42 Dell (unknown)
- dell-m43 Dell Precision
- dell-m44 Dell Inspiron
-
- STAC9220/9221
- ref Reference board
- 3stack D945 3stack
- 5stack D945 5stack + SPDIF
- intel-mac-v1 Intel Mac Type 1
- intel-mac-v2 Intel Mac Type 2
- intel-mac-v3 Intel Mac Type 3
- intel-mac-v4 Intel Mac Type 4
- intel-mac-v5 Intel Mac Type 5
- intel-mac-auto Intel Mac (detect type according to subsystem id)
- macmini Intel Mac Mini (equivalent with type 3)
- macbook Intel Mac Book (eq. type 5)
- macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)
- macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3)
- imac-intel Intel iMac (eq. type 2)
- imac-intel-20 Intel iMac (newer version) (eq. type 3)
- dell-d81 Dell (unknown)
- dell-d82 Dell (unknown)
- dell-m81 Dell (unknown)
- dell-m82 Dell XPS M1210
-
- STAC9202/9250/9251
- ref Reference board, base config
- m2-2 Some Gateway MX series laptops
- m6 Some Gateway NX series laptops
- pa6 Gateway NX860 series
-
- STAC9227/9228/9229/927x
- ref Reference board
- ref-no-jd Reference board without HP/Mic jack detection
- 3stack D965 3stack
- 5stack D965 5stack + SPDIF
- dell-3stack Dell Dimension E520
- dell-bios Fixes with Dell BIOS setup
-
- STAC92HD71B*
- ref Reference board
- dell-m4-1 Dell desktops
- dell-m4-2 Dell desktops
- dell-m4-3 Dell desktops
-
- STAC92HD73*
- ref Reference board
- no-jd BIOS setup but without jack-detection
- dell-m6-amic Dell desktops/laptops with analog mics
- dell-m6-dmic Dell desktops/laptops with digital mics
- dell-m6 Dell desktops/laptops with both type of mics
-
- STAC9872
- vaio Setup for VAIO FE550G/SZ110
- vaio-ar Setup for VAIO AR
+ models depending on the codec chip. The list of available models
+ is found in HD-Audio-Models.txt
The model name "genric" is treated as a special case. When this
model is given, the driver uses the generic codec parser without
"codec-patch". It's sometimes good for testing and debugging.
If the default configuration doesn't work and one of the above
- matches with your device, report it together with the PCI
- subsystem ID (output of "lspci -nv") to ALSA BTS or alsa-devel
+ matches with your device, report it together with alsa-info.sh
+ output (with --no-upload option) to kernel bugzilla or alsa-devel
ML (see the section "Links and Addresses").
power_save and power_save_controller options are for power-saving
@@ -1652,7 +1350,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
* AuzenTech X-Meridian
* Bgears b-Enspirer
* Club3D Theatron DTS
- * HT-Omega Claro
+ * HT-Omega Claro (plus)
+ * HT-Omega Claro halo (XT)
* Razer Barracuda AC-1
* Sondigo Inferno
@@ -2409,8 +2108,11 @@ Links and Addresses
ALSA project homepage
http://www.alsa-project.org
- ALSA Bug Tracking System
- https://bugtrack.alsa-project.org/bugs/
+ Kernel Bugzilla
+ http://bugzilla.kernel.org/
ALSA Developers ML
mailto:alsa-devel@alsa-project.org
+
+ alsa-info.sh script
+ http://www.alsa-project.org/alsa-info.sh
diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt
new file mode 100644
index 0000000000000000000000000000000000000000..4b7ac21ea9eb15eb3c6ef4a350e3b640d998b1e2
--- /dev/null
+++ b/Documentation/sound/alsa/HD-Audio-Models.txt
@@ -0,0 +1,348 @@
+ Model name Description
+ ---------- -----------
+ALC880
+======
+ 3stack 3-jack in back and a headphone out
+ 3stack-digout 3-jack in back, a HP out and a SPDIF out
+ 5stack 5-jack in back, 2-jack in front
+ 5stack-digout 5-jack in back, 2-jack in front, a SPDIF out
+ 6stack 6-jack in back, 2-jack in front
+ 6stack-digout 6-jack with a SPDIF out
+ w810 3-jack
+ z71v 3-jack (HP shared SPDIF)
+ asus 3-jack (ASUS Mobo)
+ asus-w1v ASUS W1V
+ asus-dig ASUS with SPDIF out
+ asus-dig2 ASUS with SPDIF out (using GPIO2)
+ uniwill 3-jack
+ fujitsu Fujitsu Laptops (Pi1536)
+ F1734 2-jack
+ lg LG laptop (m1 express dual)
+ lg-lw LG LW20/LW25 laptop
+ tcl TCL S700
+ clevo Clevo laptops (m520G, m665n)
+ medion Medion Rim 2150
+ test for testing/debugging purpose, almost all controls can be
+ adjusted. Appearing only when compiled with
+ $CONFIG_SND_DEBUG=y
+ auto auto-config reading BIOS (default)
+
+ALC260
+======
+ hp HP machines
+ hp-3013 HP machines (3013-variant)
+ hp-dc7600 HP DC7600
+ fujitsu Fujitsu S7020
+ acer Acer TravelMate
+ will Will laptops (PB V7900)
+ replacer Replacer 672V
+ basic fixed pin assignment (old default model)
+ test for testing/debugging purpose, almost all controls can
+ adjusted. Appearing only when compiled with
+ $CONFIG_SND_DEBUG=y
+ auto auto-config reading BIOS (default)
+
+ALC262
+======
+ fujitsu Fujitsu Laptop
+ hp-bpc HP xw4400/6400/8400/9400 laptops
+ hp-bpc-d7000 HP BPC D7000
+ hp-tc-t5735 HP Thin Client T5735
+ hp-rp5700 HP RP5700
+ benq Benq ED8
+ benq-t31 Benq T31
+ hippo Hippo (ATI) with jack detection, Sony UX-90s
+ hippo_1 Hippo (Benq) with jack detection
+ sony-assamd Sony ASSAMD
+ toshiba-s06 Toshiba S06
+ toshiba-rx1 Toshiba RX1
+ ultra Samsung Q1 Ultra Vista model
+ lenovo-3000 Lenovo 3000 y410
+ nec NEC Versa S9100
+ basic fixed pin assignment w/o SPDIF
+ auto auto-config reading BIOS (default)
+
+ALC267/268
+==========
+ quanta-il1 Quanta IL1 mini-notebook
+ 3stack 3-stack model
+ toshiba Toshiba A205
+ acer Acer laptops
+ acer-dmic Acer laptops with digital-mic
+ acer-aspire Acer Aspire One
+ dell Dell OEM laptops (Vostro 1200)
+ zepto Zepto laptops
+ test for testing/debugging purpose, almost all controls can
+ adjusted. Appearing only when compiled with
+ $CONFIG_SND_DEBUG=y
+ auto auto-config reading BIOS (default)
+
+ALC269
+======
+ basic Basic preset
+ quanta Quanta FL1
+ eeepc-p703 ASUS Eeepc P703 P900A
+ eeepc-p901 ASUS Eeepc P901 S101
+ fujitsu FSC Amilo
+ auto auto-config reading BIOS (default)
+
+ALC662/663
+==========
+ 3stack-dig 3-stack (2-channel) with SPDIF
+ 3stack-6ch 3-stack (6-channel)
+ 3stack-6ch-dig 3-stack (6-channel) with SPDIF
+ 6stack-dig 6-stack with SPDIF
+ lenovo-101e Lenovo laptop
+ eeepc-p701 ASUS Eeepc P701
+ eeepc-ep20 ASUS Eeepc EP20
+ ecs ECS/Foxconn mobo
+ m51va ASUS M51VA
+ g71v ASUS G71V
+ h13 ASUS H13
+ g50v ASUS G50V
+ asus-mode1 ASUS
+ asus-mode2 ASUS
+ asus-mode3 ASUS
+ asus-mode4 ASUS
+ asus-mode5 ASUS
+ asus-mode6 ASUS
+ auto auto-config reading BIOS (default)
+
+ALC882/885
+==========
+ 3stack-dig 3-jack with SPDIF I/O
+ 6stack-dig 6-jack digital with SPDIF I/O
+ arima Arima W820Di1
+ targa Targa T8, MSI-1049 T8
+ asus-a7j ASUS A7J
+ asus-a7m ASUS A7M
+ macpro MacPro support
+ mbp3 Macbook Pro rev3
+ imac24 iMac 24'' with jack detection
+ w2jc ASUS W2JC
+ auto auto-config reading BIOS (default)
+
+ALC883/888
+==========
+ 3stack-dig 3-jack with SPDIF I/O
+ 6stack-dig 6-jack digital with SPDIF I/O
+ 3stack-6ch 3-jack 6-channel
+ 3stack-6ch-dig 3-jack 6-channel with SPDIF I/O
+ 6stack-dig-demo 6-jack digital for Intel demo board
+ acer Acer laptops (Travelmate 3012WTMi, Aspire 5600, etc)
+ acer-aspire Acer Aspire 9810
+ acer-aspire-4930g Acer Aspire 4930G
+ medion Medion Laptops
+ medion-md2 Medion MD2
+ targa-dig Targa/MSI
+ targa-2ch-dig Targs/MSI with 2-channel
+ laptop-eapd 3-jack with SPDIF I/O and EAPD (Clevo M540JE, M550JE)
+ lenovo-101e Lenovo 101E
+ lenovo-nb0763 Lenovo NB0763
+ lenovo-ms7195-dig Lenovo MS7195
+ lenovo-sky Lenovo Sky
+ haier-w66 Haier W66
+ 3stack-hp HP machines with 3stack (Lucknow, Samba boards)
+ 6stack-dell Dell machines with 6stack (Inspiron 530)
+ mitac Mitac 8252D
+ clevo-m720 Clevo M720 laptop series
+ fujitsu-pi2515 Fujitsu AMILO Pi2515
+ fujitsu-xa3530 Fujitsu AMILO XA3530
+ 3stack-6ch-intel Intel DG33* boards
+ auto auto-config reading BIOS (default)
+
+ALC861/660
+==========
+ 3stack 3-jack
+ 3stack-dig 3-jack with SPDIF I/O
+ 6stack-dig 6-jack with SPDIF I/O
+ 3stack-660 3-jack (for ALC660)
+ uniwill-m31 Uniwill M31 laptop
+ toshiba Toshiba laptop support
+ asus Asus laptop support
+ asus-laptop ASUS F2/F3 laptops
+ auto auto-config reading BIOS (default)
+
+ALC861VD/660VD
+==============
+ 3stack 3-jack
+ 3stack-dig 3-jack with SPDIF OUT
+ 6stack-dig 6-jack with SPDIF OUT
+ 3stack-660 3-jack (for ALC660VD)
+ 3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD)
+ lenovo Lenovo 3000 C200
+ dallas Dallas laptops
+ hp HP TX1000
+ asus-v1s ASUS V1Sn
+ auto auto-config reading BIOS (default)
+
+CMI9880
+=======
+ minimal 3-jack in back
+ min_fp 3-jack in back, 2-jack in front
+ full 6-jack in back, 2-jack in front
+ full_dig 6-jack in back, 2-jack in front, SPDIF I/O
+ allout 5-jack in back, 2-jack in front, SPDIF out
+ auto auto-config reading BIOS (default)
+
+AD1882 / AD1882A
+================
+ 3stack 3-stack mode (default)
+ 6stack 6-stack mode
+
+AD1884A / AD1883 / AD1984A / AD1984B
+====================================
+ desktop 3-stack desktop (default)
+ laptop laptop with HP jack sensing
+ mobile mobile devices with HP jack sensing
+ thinkpad Lenovo Thinkpad X300
+
+AD1884
+======
+ N/A
+
+AD1981
+======
+ basic 3-jack (default)
+ hp HP nx6320
+ thinkpad Lenovo Thinkpad T60/X60/Z60
+ toshiba Toshiba U205
+
+AD1983
+======
+ N/A
+
+AD1984
+======
+ basic default configuration
+ thinkpad Lenovo Thinkpad T61/X61
+ dell Dell T3400
+
+AD1986A
+=======
+ 6stack 6-jack, separate surrounds (default)
+ 3stack 3-stack, shared surrounds
+ laptop 2-channel only (FSC V2060, Samsung M50)
+ laptop-eapd 2-channel with EAPD (ASUS A6J)
+ laptop-automute 2-channel with EAPD and HP-automute (Lenovo N100)
+ ultra 2-channel with EAPD (Samsung Ultra tablet PC)
+ samsung 2-channel with EAPD (Samsung R65)
+
+AD1988/AD1988B/AD1989A/AD1989B
+==============================
+ 6stack 6-jack
+ 6stack-dig ditto with SPDIF
+ 3stack 3-jack
+ 3stack-dig ditto with SPDIF
+ laptop 3-jack with hp-jack automute
+ laptop-dig ditto with SPDIF
+ auto auto-config reading BIOS (default)
+
+Conexant 5045
+=============
+ laptop-hpsense Laptop with HP sense (old model laptop)
+ laptop-micsense Laptop with Mic sense (old model fujitsu)
+ laptop-hpmicsense Laptop with HP and Mic senses
+ benq Benq R55E
+ test for testing/debugging purpose, almost all controls
+ can be adjusted. Appearing only when compiled with
+ $CONFIG_SND_DEBUG=y
+
+Conexant 5047
+=============
+ laptop Basic Laptop config
+ laptop-hp Laptop config for some HP models (subdevice 30A5)
+ laptop-eapd Laptop config with EAPD support
+ test for testing/debugging purpose, almost all controls
+ can be adjusted. Appearing only when compiled with
+ $CONFIG_SND_DEBUG=y
+
+Conexant 5051
+=============
+ laptop Basic Laptop config (default)
+ hp HP Spartan laptop
+
+STAC9200
+========
+ ref Reference board
+ dell-d21 Dell (unknown)
+ dell-d22 Dell (unknown)
+ dell-d23 Dell (unknown)
+ dell-m21 Dell Inspiron 630m, Dell Inspiron 640m
+ dell-m22 Dell Latitude D620, Dell Latitude D820
+ dell-m23 Dell XPS M1710, Dell Precision M90
+ dell-m24 Dell Latitude 120L
+ dell-m25 Dell Inspiron E1505n
+ dell-m26 Dell Inspiron 1501
+ dell-m27 Dell Inspiron E1705/9400
+ gateway Gateway laptops with EAPD control
+ panasonic Panasonic CF-74
+
+STAC9205/9254
+=============
+ ref Reference board
+ dell-m42 Dell (unknown)
+ dell-m43 Dell Precision
+ dell-m44 Dell Inspiron
+
+STAC9220/9221
+=============
+ ref Reference board
+ 3stack D945 3stack
+ 5stack D945 5stack + SPDIF
+ intel-mac-v1 Intel Mac Type 1
+ intel-mac-v2 Intel Mac Type 2
+ intel-mac-v3 Intel Mac Type 3
+ intel-mac-v4 Intel Mac Type 4
+ intel-mac-v5 Intel Mac Type 5
+ intel-mac-auto Intel Mac (detect type according to subsystem id)
+ macmini Intel Mac Mini (equivalent with type 3)
+ macbook Intel Mac Book (eq. type 5)
+ macbook-pro-v1 Intel Mac Book Pro 1st generation (eq. type 3)
+ macbook-pro Intel Mac Book Pro 2nd generation (eq. type 3)
+ imac-intel Intel iMac (eq. type 2)
+ imac-intel-20 Intel iMac (newer version) (eq. type 3)
+ dell-d81 Dell (unknown)
+ dell-d82 Dell (unknown)
+ dell-m81 Dell (unknown)
+ dell-m82 Dell XPS M1210
+
+STAC9202/9250/9251
+==================
+ ref Reference board, base config
+ m2-2 Some Gateway MX series laptops
+ m6 Some Gateway NX series laptops
+ pa6 Gateway NX860 series
+
+STAC9227/9228/9229/927x
+=======================
+ ref Reference board
+ ref-no-jd Reference board without HP/Mic jack detection
+ 3stack D965 3stack
+ 5stack D965 5stack + SPDIF
+ dell-3stack Dell Dimension E520
+ dell-bios Fixes with Dell BIOS setup
+
+STAC92HD71B*
+============
+ ref Reference board
+ dell-m4-1 Dell desktops
+ dell-m4-2 Dell desktops
+ dell-m4-3 Dell desktops
+
+STAC92HD73*
+===========
+ ref Reference board
+ no-jd BIOS setup but without jack-detection
+ dell-m6-amic Dell desktops/laptops with analog mics
+ dell-m6-dmic Dell desktops/laptops with digital mics
+ dell-m6 Dell desktops/laptops with both type of mics
+
+STAC92HD83*
+===========
+ ref Reference board
+
+STAC9872
+========
+ vaio Setup for VAIO FE550G/SZ110
+ vaio-ar Setup for VAIO AR
diff --git a/Documentation/sound/alsa/HD-Audio.txt b/Documentation/sound/alsa/HD-Audio.txt
new file mode 100644
index 0000000000000000000000000000000000000000..8d68fff7183945a6b2dba6386ff4cf7da7ea5753
--- /dev/null
+++ b/Documentation/sound/alsa/HD-Audio.txt
@@ -0,0 +1,577 @@
+MORE NOTES ON HD-AUDIO DRIVER
+=============================
+ Takashi Iwai
+
+
+GENERAL
+-------
+
+HD-audio is the new standard on-board audio component on modern PCs
+after AC97. Although Linux has been supporting HD-audio since long
+time ago, there are often problems with new machines. A part of the
+problem is broken BIOS, and the rest is the driver implementation.
+This document explains the brief trouble-shooting and debugging
+methods for the HD-audio hardware.
+
+The HD-audio component consists of two parts: the controller chip and
+the codec chips on the HD-audio bus. Linux provides a single driver
+for all controllers, snd-hda-intel. Although the driver name contains
+a word of a well-known harware vendor, it's not specific to it but for
+all controller chips by other companies. Since the HD-audio
+controllers are supposed to be compatible, the single snd-hda-driver
+should work in most cases. But, not surprisingly, there are known
+bugs and issues specific to each controller type. The snd-hda-intel
+driver has a bunch of workarounds for these as described below.
+
+A controller may have multiple codecs. Usually you have one audio
+codec and optionally one modem codec. In theory, there might be
+multiple audio codecs, e.g. for analog and digital outputs, and the
+driver might not work properly because of conflict of mixer elements.
+This should be fixed in future if such hardware really exists.
+
+The snd-hda-intel driver has several different codec parsers depending
+on the codec. It has a generic parser as a fallback, but this
+functionality is fairly limited until now. Instead of the generic
+parser, usually the codec-specific parser (coded in patch_*.c) is used
+for the codec-specific implementations. The details about the
+codec-specific problems are explained in the later sections.
+
+If you are interested in the deep debugging of HD-audio, read the
+HD-audio specification at first. The specification is found on
+Intel's web page, for example:
+
+- http://www.intel.com/standards/hdaudio/
+
+
+HD-AUDIO CONTROLLER
+-------------------
+
+DMA-Position Problem
+~~~~~~~~~~~~~~~~~~~~
+The most common problem of the controller is the inaccurate DMA
+pointer reporting. The DMA pointer for playback and capture can be
+read in two ways, either via a LPIB register or via a position-buffer
+map. As default the driver tries to read from the io-mapped
+position-buffer, and falls back to LPIB if the position-buffer appears
+dead. However, this detection isn't perfect on some devices. In such
+a case, you can change the default method via `position_fix` option.
+
+`position_fix=1` means to use LPIB method explicitly.
+`position_fix=2` means to use the position-buffer. 0 is the default
+value, the automatic check and fallback to LPIB as described in the
+above. If you get a problem of repeated sounds, this option might
+help.
+
+In addition to that, every controller is known to be broken regarding
+the wake-up timing. It wakes up a few samples before actually
+processing the data on the buffer. This caused a lot of problems, for
+example, with ALSA dmix or JACK. Since 2.6.27 kernel, the driver puts
+an artificial delay to the wake up timing. This delay is controlled
+via `bdl_pos_adj` option.
+
+When `bdl_pos_adj` is a negative value (as default), it's assigned to
+an appropriate value depending on the controller chip. For Intel
+chips, it'd be 1 while it'd be 32 for others. Usually this works.
+Only in case it doesn't work and you get warning messages, you should
+change this parameter to other values.
+
+
+Codec-Probing Problem
+~~~~~~~~~~~~~~~~~~~~~
+A less often but a more severe problem is the codec probing. When
+BIOS reports the available codec slots wrongly, the driver gets
+confused and tries to access the non-existing codec slot. This often
+results in the total screw-up, and destructs the further communication
+with the codec chips. The symptom appears usually as error messages
+like:
+------------------------------------------------------------------------
+ hda_intel: azx_get_response timeout, switching to polling mode:
+ last cmd=0x12345678
+ hda_intel: azx_get_response timeout, switching to single_cmd mode:
+ last cmd=0x12345678
+------------------------------------------------------------------------
+
+The first line is a warning, and this is usually relatively harmless.
+It means that the codec response isn't notified via an IRQ. The
+driver uses explicit polling method to read the response. It gives
+very slight CPU overhead, but you'd unlikely notice it.
+
+The second line is, however, a fatal error. If this happens, usually
+it means that something is really wrong. Most likely you are
+accessing a non-existing codec slot.
+
+Thus, if the second error message appears, try to narrow the probed
+codec slots via `probe_mask` option. It's a bitmask, and each bit
+corresponds to the codec slot. For example, to probe only the first
+slot, pass `probe_mask=1`. For the first and the third slots, pass
+`probe_mask=5` (where 5 = 1 | 4), and so on.
+
+Since 2.6.29 kernel, the driver has a more robust probing method, so
+this error might happen rarely, though.
+
+
+Interrupt Handling
+~~~~~~~~~~~~~~~~~~
+In rare but some cases, the interrupt isn't properly handled as
+default. You would notice this by the DMA transfer error reported by
+ALSA PCM core, for example. Using MSI might help in such a case.
+Pass `enable_msi=1` option for enabling MSI.
+
+
+HD-AUDIO CODEC
+--------------
+
+Model Option
+~~~~~~~~~~~~
+The most common problem regarding the HD-audio driver is the
+unsupported codec features or the mismatched device configuration.
+Most of codec-specific code has several preset models, either to
+override the BIOS setup or to provide more comprehensive features.
+
+The driver checks PCI SSID and looks through the static configuration
+table until any matching entry is found. If you have a new machine,
+you may see a message like below:
+------------------------------------------------------------------------
+ hda_codec: Unknown model for ALC880, trying auto-probe from BIOS...
+------------------------------------------------------------------------
+Even if you see such a message, DON'T PANIC. Take a deep breath and
+keep your towel. First of all, it's an informational message, no
+warning, no error. This means that the PCI SSID of your device isn't
+listed in the known preset model (white-)list. But, this doesn't mean
+that the driver is broken. Many codec-drivers provide the automatic
+configuration mechanism based on the BIOS setup.
+
+The HD-audio codec has usually "pin" widgets, and BIOS sets the default
+configuration of each pin, which indicates the location, the
+connection type, the jack color, etc. The HD-audio driver can guess
+the right connection judging from these default configuration values.
+However -- some codec-support codes, such as patch_analog.c, don't
+support the automatic probing (yet as of 2.6.28). And, BIOS is often,
+yes, pretty often broken. It sets up wrong values and screws up the
+driver.
+
+The preset model is provided basically to overcome such a situation.
+When the matching preset model is found in the white-list, the driver
+assumes the static configuration of that preset and builds the mixer
+elements and PCM streams based on the static information. Thus, if
+you have a newer machine with a slightly different PCI SSID from the
+existing one, you may have a good chance to re-use the same model.
+You can pass the `model` option to specify the preset model instead of
+PCI SSID look-up.
+
+What `model` option values are available depends on the codec chip.
+Check your codec chip from the codec proc file (see "Codec Proc-File"
+section below). It will show the vendor/product name of your codec
+chip. Then, see Documentation/sound/alsa/HD-Audio-Modelstxt file,
+the section of HD-audio driver. You can find a list of codecs
+and `model` options belonging to each codec. For example, for Realtek
+ALC262 codec chip, pass `model=ultra` for devices that are compatible
+with Samsung Q1 Ultra.
+
+Thus, the first thing you can do for any brand-new, unsupported and
+non-working HD-audio hardware is to check HD-audio codec and several
+different `model` option values. If you have a luck, some of them
+might suit with your device well.
+
+Some codecs such as ALC880 have a special model option `model=test`.
+This configures the driver to provide as many mixer controls as
+possible for every single pin feature except for the unsolicited
+events (and maybe some other specials). Adjust each mixer element and
+try the I/O in the way of trial-and-error until figuring out the whole
+I/O pin mappings.
+
+Note that `model=generic` has a special meaning. It means to use the
+generic parser regardless of the codec. Usually the codec-specific
+parser is much better than the generic parser (as now). Thus this
+option is more about the debugging purpose.
+
+
+Speaker and Headphone Output
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+One of the most frequent (and obvious) bugs with HD-audio is the
+silent output from either or both of a built-in speaker and a
+headphone jack. In general, you should try a headphone output at
+first. A speaker output often requires more additional controls like
+the external amplifier bits. Thus a headphone output has a slightly
+better chance.
+
+Before making a bug report, double-check whether the mixer is set up
+correctly. The recent version of snd-hda-intel driver provides mostly
+"Master" volume control as well as "Front" volume (where Front
+indicates the front-channels). In addition, there can be individual
+"Headphone" and "Speaker" controls.
+
+Ditto for the speaker output. There can be "External Amplifier"
+switch on some codecs. Turn on this if present.
+
+Another related problem is the automatic mute of speaker output by
+headphone plugging. This feature is implemented in most cases, but
+not on every preset model or codec-support code.
+
+In anyway, try a different model option if you have such a problem.
+Some other models may match better and give you more matching
+functionality. If none of the available models works, send a bug
+report. See the bug report section for details.
+
+If you are masochistic enough to debug the driver problem, note the
+following:
+
+- The speaker (and the headphone, too) output often requires the
+ external amplifier. This can be set usually via EAPD verb or a
+ certain GPIO. If the codec pin supports EAPD, you have a better
+ chance via SET_EAPD_BTL verb (0x70c). On others, GPIO pin (mostly
+ it's either GPIO0 or GPIO1) may turn on/off EAPD.
+- Some Realtek codecs require special vendor-specific coefficients to
+ turn on the amplifier. See patch_realtek.c.
+- IDT codecs may have extra power-enable/disable controls on each
+ analog pin. See patch_sigmatel.c.
+- Very rare but some devices don't accept the pin-detection verb until
+ triggered. Issuing GET_PIN_SENSE verb (0xf09) may result in the
+ codec-communication stall. Some examples are found in
+ patch_realtek.c.
+
+
+Capture Problems
+~~~~~~~~~~~~~~~~
+The capture problems are often because of missing setups of mixers.
+Thus, before submitting a bug report, make sure that you set up the
+mixer correctly. For example, both "Capture Volume" and "Capture
+Switch" have to be set properly in addition to the right "Capture
+Source" or "Input Source" selection. Some devices have "Mic Boost"
+volume or switch.
+
+When the PCM device is opened via "default" PCM (without pulse-audio
+plugin), you'll likely have "Digital Capture Volume" control as well.
+This is provided for the extra gain/attenuation of the signal in
+software, especially for the inputs without the hardware volume
+control such as digital microphones. Unless really needed, this
+should be set to exactly 50%, corresponding to 0dB -- neither extra
+gain nor attenuation. When you use "hw" PCM, i.e., a raw access PCM,
+this control will have no influence, though.
+
+It's known that some codecs / devices have fairly bad analog circuits,
+and the recorded sound contains a certain DC-offset. This is no bug
+of the driver.
+
+Most of modern laptops have no analog CD-input connection. Thus, the
+recording from CD input won't work in many cases although the driver
+provides it as the capture source. Use CDDA instead.
+
+The automatic switching of the built-in and external mic per plugging
+is implemented on some codec models but not on every model. Partly
+because of my laziness but mostly lack of testers. Feel free to
+submit the improvement patch to the author.
+
+
+Direct Debugging
+~~~~~~~~~~~~~~~~
+If no model option gives you a better result, and you are a tough guy
+to fight against evil, try debugging via hitting the raw HD-audio
+codec verbs to the device. Some tools are available: hda-emu and
+hda-analyzer. The detailed description is found in the sections
+below. You'd need to enable hwdep for using these tools. See "Kernel
+Configuration" section.
+
+
+OTHER ISSUES
+------------
+
+Kernel Configuration
+~~~~~~~~~~~~~~~~~~~~
+In general, I recommend you to enable the sound debug option,
+`CONFIG_SND_DEBUG=y`, no matter whether you are debugging or not.
+This enables snd_printd() macro and others, and you'll get additional
+kernel messages at probing.
+
+In addition, you can enable `CONFIG_SND_DEBUG_VERBOSE=y`. But this
+will give you far more messages. Thus turn this on only when you are
+sure to want it.
+
+Don't forget to turn on the appropriate `CONFIG_SND_HDA_CODEC_*`
+options. Note that each of them corresponds to the codec chip, not
+the controller chip. Thus, even if lspci shows the Nvidia controller,
+you may need to choose the option for other vendors. If you are
+unsure, just select all yes.
+
+`CONFIG_SND_HDA_HWDEP` is a useful option for debugging the driver.
+When this is enabled, the driver creates hardware-dependent devices
+(one per each codec), and you have a raw access to the device via
+these device files. For example, `hwC0D2` will be created for the
+codec slot #2 of the first card (#0). For debug-tools such as
+hda-verb and hda-analyzer, the hwdep device has to be enabled.
+Thus, it'd be better to turn this on always.
+
+`CONFIG_SND_HDA_RECONFIG` is a new option, and this depends on the
+hwdep option above. When enabled, you'll have some sysfs files under
+the corresponding hwdep directory. See "HD-audio reconfiguration"
+section below.
+
+`CONFIG_SND_HDA_POWER_SAVE` option enables the power-saving feature.
+See "Power-saving" section below.
+
+
+Codec Proc-File
+~~~~~~~~~~~~~~~
+The codec proc-file is a treasure-chest for debugging HD-audio.
+It shows most of useful information of each codec widget.
+
+The proc file is located in /proc/asound/card*/codec#*, one file per
+each codec slot. You can know the codec vendor, product id and
+names, the type of each widget, capabilities and so on.
+This file, however, doesn't show the jack sensing state, so far. This
+is because the jack-sensing might be depending on the trigger state.
+
+This file will be picked up by the debug tools, and also it can be fed
+to the emulator as the primary codec information. See the debug tools
+section below.
+
+This proc file can be also used to check whether the generic parser is
+used. When the generic parser is used, the vendor/product ID name
+will appear as "Realtek ID 0262", instead of "Realtek ALC262".
+
+
+HD-Audio Reconfiguration
+~~~~~~~~~~~~~~~~~~~~~~~~
+This is an experimental feature to allow you re-configure the HD-audio
+codec dynamically without reloading the driver. The following sysfs
+files are available under each codec-hwdep device directory (e.g.
+/sys/class/sound/hwC0D0):
+
+vendor_id::
+ Shows the 32bit codec vendor-id hex number. You can change the
+ vendor-id value by writing to this file.
+subsystem_id::
+ Shows the 32bit codec subsystem-id hex number. You can change the
+ subsystem-id value by writing to this file.
+revision_id::
+ Shows the 32bit codec revision-id hex number. You can change the
+ revision-id value by writing to this file.
+afg::
+ Shows the AFG ID. This is read-only.
+mfg::
+ Shows the MFG ID. This is read-only.
+name::
+ Shows the codec name string. Can be changed by writing to this
+ file.
+modelname::
+ Shows the currently set `model` option. Can be changed by writing
+ to this file.
+init_verbs::
+ The extra verbs to execute at initialization. You can add a verb by
+ writing to this file. Pass tree numbers, nid, verb and parameter.
+hints::
+ Shows hint strings for codec parsers for any use. Right now it's
+ not used.
+reconfig::
+ Triggers the codec re-configuration. When any value is written to
+ this file, the driver re-initialize and parses the codec tree
+ again. All the changes done by the sysfs entries above are taken
+ into account.
+clear::
+ Resets the codec, removes the mixer elements and PCM stuff of the
+ specified codec, and clear all init verbs and hints.
+
+
+Power-Saving
+~~~~~~~~~~~~
+The power-saving is a kind of auto-suspend of the device. When the
+device is inactive for a certain time, the device is automatically
+turned off to save the power. The time to go down is specified via
+`power_save` module option, and this option can be changed dynamically
+via sysfs.
+
+The power-saving won't work when the analog loopback is enabled on
+some codecs. Make sure that you mute all unneeded signal routes when
+you want the power-saving.
+
+The power-saving feature might cause audible click noises at each
+power-down/up depending on the device. Some of them might be
+solvable, but some are hard, I'm afraid. Some distros such as
+openSUSE enables the power-saving feature automatically when the power
+cable is unplugged. Thus, if you hear noises, suspect first the
+power-saving. See /sys/module/snd_hda_intel/parameters/power_save to
+check the current value. If it's non-zero, the feature is turned on.
+
+
+Development Tree
+~~~~~~~~~~~~~~~~
+The latest development codes for HD-audio are found on sound git tree:
+
+- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
+
+The master branch or for-next branches can be used as the main
+development branches in general while the HD-audio specific patches
+are committed in topic/hda branch.
+
+If you are using the latest Linus tree, it'd be better to pull the
+above GIT tree onto it. If you are using the older kernels, an easy
+way to try the latest ALSA code is to build from the snapshot
+tarball. There are daily tarballs and the latest snapshot tarball.
+All can be built just like normal alsa-driver release packages, that
+is, installed via the usual spells: configure, make and make
+install(-modules). See INSTALL in the package. The snapshot tarballs
+are found at:
+
+- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/snapshot/
+
+
+Sending a Bug Report
+~~~~~~~~~~~~~~~~~~~~
+If any model or module options don't work for your device, it's time
+to send a bug report to the developers. Give the following in your
+bug report:
+
+- Hardware vendor, product and model names
+- Kernel version (and ALSA-driver version if you built externally)
+- `alsa-info.sh` output; run with `--no-upload` option. See the
+ section below about alsa-info
+
+If it's a regression, at best, send alsa-info outputs of both working
+and non-working kernels. This is really helpful because we can
+compare the codec registers directly.
+
+Send a bug report either the followings:
+
+kernel-bugzilla::
+ http://bugme.linux-foundation.org/
+alsa-devel ML::
+ alsa-devel@alsa-project.org
+
+
+DEBUG TOOLS
+-----------
+
+This section describes some tools available for debugging HD-audio
+problems.
+
+alsa-info
+~~~~~~~~~
+The script `alsa-info.sh` is a very useful tool to gather the audio
+device information. You can fetch the latest version from:
+
+- http://www.alsa-project.org/alsa-info.sh
+
+Run this script as root, and it will gather the important information
+such as the module lists, module parameters, proc file contents
+including the codec proc files, mixer outputs and the control
+elements. As default, it will store the information onto a web server
+on alsa-project.org. But, if you send a bug report, it'd be better to
+run with `--no-upload` option, and attach the generated file.
+
+There are some other useful options. See `--help` option output for
+details.
+
+
+hda-verb
+~~~~~~~~
+hda-verb is a tiny program that allows you to access the HD-audio
+codec directly. You can execute a raw HD-audio codec verb with this.
+This program accesses the hwdep device, thus you need to enable the
+kernel config `CONFIG_SND_HDA_HWDEP=y` beforehand.
+
+The hda-verb program takes four arguments: the hwdep device file, the
+widget NID, the verb and the parameter. When you access to the codec
+on the slot 2 of the card 0, pass /dev/snd/hwC0D2 to the first
+argument, typically. (However, the real path name depends on the
+system.)
+
+The second parameter is the widget number-id to access. The third
+parameter can be either a hex/digit number or a string corresponding
+to a verb. Similarly, the last parameter is the value to write, or
+can be a string for the parameter type.
+
+------------------------------------------------------------------------
+ % hda-verb /dev/snd/hwC0D0 0x12 0x701 2
+ nid = 0x12, verb = 0x701, param = 0x2
+ value = 0x0
+
+ % hda-verb /dev/snd/hwC0D0 0x0 PARAMETERS VENDOR_ID
+ nid = 0x0, verb = 0xf00, param = 0x0
+ value = 0x10ec0262
+
+ % hda-verb /dev/snd/hwC0D0 2 set_a 0xb080
+ nid = 0x2, verb = 0x300, param = 0xb080
+ value = 0x0
+------------------------------------------------------------------------
+
+Although you can issue any verbs with this program, the driver state
+won't be always updated. For example, the volume values are usually
+cached in the driver, and thus changing the widget amp value directly
+via hda-verb won't change the mixer value.
+
+The hda-verb program is found in the ftp directory:
+
+- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+
+Also a git repository is available:
+
+- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/hda-verb.git
+
+See README file in the tarball for more details about hda-verb
+program.
+
+
+hda-analyzer
+~~~~~~~~~~~~
+hda-analyzer provides a graphical interface to access the raw HD-audio
+control, based on pyGTK2 binding. It's a more powerful version of
+hda-verb. The program gives you an easy-to-use GUI stuff for showing
+the widget information and adjusting the amp values, as well as the
+proc-compatible output.
+
+The hda-analyzer is a part of alsa.git repository in
+alsa-project.org:
+
+- http://git.alsa-project.org/?p=alsa.git;a=tree;f=hda-analyzer
+
+
+Codecgraph
+~~~~~~~~~~
+Codecgraph is a utility program to generate a graph and visualizes the
+codec-node connection of a codec chip. It's especially useful when
+you analyze or debug a codec without a proper datasheet. The program
+parses the given codec proc file and converts to SVG via graphiz
+program.
+
+The tarball and GIT trees are found in the web page at:
+
+- http://helllabs.org/codecgraph/
+
+
+hda-emu
+~~~~~~~
+hda-emu is an HD-audio emulator. The main purpose of this program is
+to debug an HD-audio codec without the real hardware. Thus, it
+doesn't emulate the behavior with the real audio I/O, but it just
+dumps the codec register changes and the ALSA-driver internal changes
+at probing and operating the HD-audio driver.
+
+The program requires a codec proc-file to simulate. Get a proc file
+for the target codec beforehand, or pick up an example codec from the
+codec proc collections in the tarball. Then, run the program with the
+proc file, and the hda-emu program will start parsing the codec file
+and simulates the HD-audio driver:
+
+------------------------------------------------------------------------
+ % hda-emu codecs/stac9200-dell-d820-laptop
+ # Parsing..
+ hda_codec: Unknown model for STAC9200, using BIOS defaults
+ hda_codec: pin nid 08 bios pin config 40c003fa
+ ....
+------------------------------------------------------------------------
+
+The program gives you only a very dumb command-line interface. You
+can get a proc-file dump at the current state, get a list of control
+(mixer) elements, set/get the control element value, simulate the PCM
+operation, the jack plugging simulation, etc.
+
+The package is found in:
+
+- ftp://ftp.kernel.org/pub/linux/kernel/people/tiwai/misc/
+
+A git repository is available:
+
+- git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/hda-emu.git
+
+See README file in the tarball for more details about hda-emu
+program.
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index f738b296440a55a3a3cc86b0f0039bff1c2d2067..bba2dbb79d81c10d71bbc5b0879f6d3745d1543d 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -153,6 +153,16 @@ card*/codec#*
Shows the general codec information and the attribute of each
widget node.
+card*/eld#*
+ Available for HDMI or DisplayPort interfaces.
+ Shows ELD(EDID Like Data) info retrieved from the attached HDMI sink,
+ and describes its audio capabilities and configurations.
+
+ Some ELD fields may be modified by doing `echo name hex_value > eld#*`.
+ Only do this if you are sure the HDMI sink provided value is wrong.
+ And if that makes your HDMI audio work, please report to us so that we
+ can fix it in future kernel releases.
+
Sequencer Information
---------------------
diff --git a/Documentation/sound/alsa/soc/machine.txt b/Documentation/sound/alsa/soc/machine.txt
index f370e7db86af6a970de14433523af4b1ca71d390..bab7711ce96311470a3eddb9a9500772b02a777e 100644
--- a/Documentation/sound/alsa/soc/machine.txt
+++ b/Documentation/sound/alsa/soc/machine.txt
@@ -9,7 +9,7 @@ the audio subsystem with the kernel as a platform device and is represented by
the following struct:-
/* SoC machine */
-struct snd_soc_machine {
+struct snd_soc_card {
char *name;
int (*probe)(struct platform_device *pdev);
@@ -67,10 +67,10 @@ static struct snd_soc_dai_link corgi_dai = {
.ops = &corgi_ops,
};
-struct snd_soc_machine then sets up the machine with it's DAIs. e.g.
+struct snd_soc_card then sets up the machine with it's DAIs. e.g.
/* corgi audio machine driver */
-static struct snd_soc_machine snd_soc_machine_corgi = {
+static struct snd_soc_card snd_soc_corgi = {
.name = "Corgi",
.dai_link = &corgi_dai,
.num_links = 1,
@@ -90,7 +90,7 @@ static struct wm8731_setup_data corgi_wm8731_setup = {
/* corgi audio subsystem */
static struct snd_soc_device corgi_snd_devdata = {
- .machine = &snd_soc_machine_corgi,
+ .machine = &snd_soc_corgi,
.platform = &pxa2xx_soc_platform,
.codec_dev = &soc_codec_dev_wm8731,
.codec_data = &corgi_wm8731_setup,
diff --git a/Documentation/tracepoints.txt b/Documentation/tracepoints.txt
index 5d354e16749447c667934ecd4c8f4fe5ee3da36c..6f0a044f5b5e51e27f2bdae2cd6d68123eb98bd7 100644
--- a/Documentation/tracepoints.txt
+++ b/Documentation/tracepoints.txt
@@ -3,28 +3,30 @@
Mathieu Desnoyers
-This document introduces Linux Kernel Tracepoints and their use. It provides
-examples of how to insert tracepoints in the kernel and connect probe functions
-to them and provides some examples of probe functions.
+This document introduces Linux Kernel Tracepoints and their use. It
+provides examples of how to insert tracepoints in the kernel and
+connect probe functions to them and provides some examples of probe
+functions.
* Purpose of tracepoints
-A tracepoint placed in code provides a hook to call a function (probe) that you
-can provide at runtime. A tracepoint can be "on" (a probe is connected to it) or
-"off" (no probe is attached). When a tracepoint is "off" it has no effect,
-except for adding a tiny time penalty (checking a condition for a branch) and
-space penalty (adding a few bytes for the function call at the end of the
-instrumented function and adds a data structure in a separate section). When a
-tracepoint is "on", the function you provide is called each time the tracepoint
-is executed, in the execution context of the caller. When the function provided
-ends its execution, it returns to the caller (continuing from the tracepoint
-site).
+A tracepoint placed in code provides a hook to call a function (probe)
+that you can provide at runtime. A tracepoint can be "on" (a probe is
+connected to it) or "off" (no probe is attached). When a tracepoint is
+"off" it has no effect, except for adding a tiny time penalty
+(checking a condition for a branch) and space penalty (adding a few
+bytes for the function call at the end of the instrumented function
+and adds a data structure in a separate section). When a tracepoint
+is "on", the function you provide is called each time the tracepoint
+is executed, in the execution context of the caller. When the function
+provided ends its execution, it returns to the caller (continuing from
+the tracepoint site).
You can put tracepoints at important locations in the code. They are
lightweight hooks that can pass an arbitrary number of parameters,
-which prototypes are described in a tracepoint declaration placed in a header
-file.
+which prototypes are described in a tracepoint declaration placed in a
+header file.
They can be used for tracing and performance accounting.
@@ -42,14 +44,16 @@ In include/trace/subsys.h :
#include
-DEFINE_TRACE(subsys_eventname,
- TPPTOTO(int firstarg, struct task_struct *p),
+DECLARE_TRACE(subsys_eventname,
+ TPPROTO(int firstarg, struct task_struct *p),
TPARGS(firstarg, p));
In subsys/file.c (where the tracing statement must be added) :
#include
+DEFINE_TRACE(subsys_eventname);
+
void somefct(void)
{
...
@@ -61,31 +65,41 @@ Where :
- subsys_eventname is an identifier unique to your event
- subsys is the name of your subsystem.
- eventname is the name of the event to trace.
-- TPPTOTO(int firstarg, struct task_struct *p) is the prototype of the function
- called by this tracepoint.
-- TPARGS(firstarg, p) are the parameters names, same as found in the prototype.
-Connecting a function (probe) to a tracepoint is done by providing a probe
-(function to call) for the specific tracepoint through
-register_trace_subsys_eventname(). Removing a probe is done through
-unregister_trace_subsys_eventname(); it will remove the probe sure there is no
-caller left using the probe when it returns. Probe removal is preempt-safe
-because preemption is disabled around the probe call. See the "Probe example"
-section below for a sample probe module.
-
-The tracepoint mechanism supports inserting multiple instances of the same
-tracepoint, but a single definition must be made of a given tracepoint name over
-all the kernel to make sure no type conflict will occur. Name mangling of the
-tracepoints is done using the prototypes to make sure typing is correct.
-Verification of probe type correctness is done at the registration site by the
-compiler. Tracepoints can be put in inline functions, inlined static functions,
-and unrolled loops as well as regular functions.
-
-The naming scheme "subsys_event" is suggested here as a convention intended
-to limit collisions. Tracepoint names are global to the kernel: they are
-considered as being the same whether they are in the core kernel image or in
-modules.
+- TPPROTO(int firstarg, struct task_struct *p) is the prototype of the
+ function called by this tracepoint.
+- TPARGS(firstarg, p) are the parameters names, same as found in the
+ prototype.
+
+Connecting a function (probe) to a tracepoint is done by providing a
+probe (function to call) for the specific tracepoint through
+register_trace_subsys_eventname(). Removing a probe is done through
+unregister_trace_subsys_eventname(); it will remove the probe.
+
+tracepoint_synchronize_unregister() must be called before the end of
+the module exit function to make sure there is no caller left using
+the probe. This, and the fact that preemption is disabled around the
+probe call, make sure that probe removal and module unload are safe.
+See the "Probe example" section below for a sample probe module.
+
+The tracepoint mechanism supports inserting multiple instances of the
+same tracepoint, but a single definition must be made of a given
+tracepoint name over all the kernel to make sure no type conflict will
+occur. Name mangling of the tracepoints is done using the prototypes
+to make sure typing is correct. Verification of probe type correctness
+is done at the registration site by the compiler. Tracepoints can be
+put in inline functions, inlined static functions, and unrolled loops
+as well as regular functions.
+
+The naming scheme "subsys_event" is suggested here as a convention
+intended to limit collisions. Tracepoint names are global to the
+kernel: they are considered as being the same whether they are in the
+core kernel image or in modules.
+
+If the tracepoint has to be used in kernel modules, an
+EXPORT_TRACEPOINT_SYMBOL_GPL() or EXPORT_TRACEPOINT_SYMBOL() can be
+used to export the defined tracepoints.
* Probe / tracepoint example
diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt
index 83c0033ee9e01d26866494b58115a1da9b2c429a..fcdc62b3c3d8d8d1b826c04ce70a3bf9ea0b2a9b 100644
--- a/Documentation/x86/boot.txt
+++ b/Documentation/x86/boot.txt
@@ -349,7 +349,7 @@ Protocol: 2.00+
3 SYSLINUX
4 EtherBoot
5 ELILO
- 7 GRuB
+ 7 GRUB
8 U-BOOT
9 Xen
A Gujin
@@ -537,8 +537,8 @@ Type: read
Offset/size: 0x248/4
Protocol: 2.08+
- If non-zero then this field contains the offset from the end of the
- real-mode code to the payload.
+ If non-zero then this field contains the offset from the beginning
+ of the protected-mode code to the payload.
The payload may be compressed. The format of both the compressed and
uncompressed data should be determined using the standard magic
diff --git a/Documentation/x86/pat.txt b/Documentation/x86/pat.txt
index c93ff5f4c0ddc0e979daa1ad0e950c8c1c6e31c1..cf08c9fff3cdaa62b2217f8e4526d9a7cc88fbec 100644
--- a/Documentation/x86/pat.txt
+++ b/Documentation/x86/pat.txt
@@ -80,6 +80,30 @@ pci proc | -- | -- | WC |
| | | |
-------------------------------------------------------------------
+Advanced APIs for drivers
+-------------------------
+A. Exporting pages to users with remap_pfn_range, io_remap_pfn_range,
+vm_insert_pfn
+
+Drivers wanting to export some pages to userspace do it by using mmap
+interface and a combination of
+1) pgprot_noncached()
+2) io_remap_pfn_range() or remap_pfn_range() or vm_insert_pfn()
+
+With PAT support, a new API pgprot_writecombine is being added. So, drivers can
+continue to use the above sequence, with either pgprot_noncached() or
+pgprot_writecombine() in step 1, followed by step 2.
+
+In addition, step 2 internally tracks the region as UC or WC in memtype
+list in order to ensure no conflicting mapping.
+
+Note that this set of APIs only works with IO (non RAM) regions. If driver
+wants to export a RAM region, it has to do set_memory_uc() or set_memory_wc()
+as step 0 above and also track the usage of those pages and use set_memory_wb()
+before the page is freed to free pool.
+
+
+
Notes:
-- in the above table mean "Not suggested usage for the API". Some of the --'s
diff --git a/Documentation/x86/x86_64/boot-options.txt b/Documentation/x86/x86_64/boot-options.txt
index f6d561a1a9b2d3d022baf17bb05138485fb32130..34c13040a718f6febbccadc1f32bc24f4a060664 100644
--- a/Documentation/x86/x86_64/boot-options.txt
+++ b/Documentation/x86/x86_64/boot-options.txt
@@ -79,17 +79,6 @@ Timing
Report when timer interrupts are lost because some code turned off
interrupts for too long.
- nmi_watchdog=NUMBER[,panic]
- NUMBER can be:
- 0 don't use an NMI watchdog
- 1 use the IO-APIC timer for the NMI watchdog
- 2 use the local APIC for the NMI watchdog using a performance counter. Note
- This will use one performance counter and the local APIC's performance
- vector.
- When panic is specified panic when an NMI watchdog timeout occurs.
- This is useful when you use a panic=... timeout and need the box
- quickly up again.
-
nohpet
Don't use the HPET timer.
diff --git a/Documentation/x86/x86_64/mm.txt b/Documentation/x86/x86_64/mm.txt
index efce7509736911434e299d0fe63e344c70d7b1e3..29b52b14d0b43950fa79f3948b1fbe4789396fbf 100644
--- a/Documentation/x86/x86_64/mm.txt
+++ b/Documentation/x86/x86_64/mm.txt
@@ -6,7 +6,7 @@ Virtual memory map with 4 level page tables:
0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
hole caused by [48:63] sign extension
ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole
-ffff810000000000 - ffffc0ffffffffff (=46 bits) direct mapping of all phys. memory
+ffff880000000000 - ffffc0ffffffffff (=57 TB) direct mapping of all phys. memory
ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole
ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space
ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB)
diff --git a/MAINTAINERS b/MAINTAINERS
index c42a567e010c7db73ef761370179e346867aaf3e..08d0ab7fa1615b093864bf30444a4427109b6d00 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -742,7 +742,7 @@ M: jirislaby@gmail.com
P: Nick Kossifidis
M: mickflemm@gmail.com
P: Luis R. Rodriguez
-M: mcgrof@gmail.com
+M: lrodriguez@atheros.com
P: Bob Copeland
M: me@bobcopeland.com
L: linux-wireless@vger.kernel.org
@@ -1607,11 +1607,6 @@ L: acpi4asus-user@lists.sourceforge.net
W: http://sourceforge.net/projects/acpi4asus
S: Maintained
-EEPRO100 NETWORK DRIVER
-P: Andrey V. Savochkin
-M: saw@saw.sw.com.sg
-S: Maintained
-
EFS FILESYSTEM
W: http://aeschi.ch.eu.org/efs/
S: Orphan
@@ -1849,7 +1844,7 @@ P: Haavard Skinnemoen
M: hskinnemoen@atmel.com
S: Supported
-GENERIC HDLC DRIVER, N2, C101, PCI200SYN and WANXL DRIVERS
+GENERIC HDLC (WAN) DRIVERS
P: Krzysztof Halasa
M: khc@pm.waw.pl
W: http://www.kernel.org/pub/linux/utils/net/hdlc/
@@ -2248,6 +2243,11 @@ M: dan.j.williams@intel.com
L: linux-kernel@vger.kernel.org
S: Supported
+INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
+P: Krzysztof Halasa
+M: khc@pm.waw.pl
+S: Maintained
+
INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
P: Deepak Saxena
M: dsaxena@plexity.net
@@ -3614,16 +3614,26 @@ L: linux-hams@vger.kernel.org
W: http://www.linux-ax25.org/
S: Maintained
-RTL818X WIRELESS DRIVER
-P: Michael Wu
-M: flamingice@sourmilk.net
-P: Andrea Merello
-M: andreamrl@tiscali.it
+RTL8180 WIRELESS DRIVER
+P: John W. Linville
+M: linville@tuxdriver.com
L: linux-wireless@vger.kernel.org
W: http://linuxwireless.org/
-T: git kernel.org:/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
+T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-testing.git
S: Maintained
+RTL8187 WIRELESS DRIVER
+P: Herton Ronaldo Krzesinski
+M: herton@mandriva.com.br
+P: Hin-Tak Leung
+M htl10@users.sourceforge.net
+P: Larry Finger
+M: Larry.Finger@lwfinger.net
+L: linux-wireless@vger.kernel.org
+W: http://linuxwireless.org/
+T: git kernel.org:/pub/scm/linux/kernel/git/linville/wireless-testing.git
+S: Maintained
+
S3 SAVAGE FRAMEBUFFER DRIVER
P: Antonino Daplas
M: adaplas@gmail.com
@@ -3913,6 +3923,18 @@ M: mhoffman@lightlink.com
L: lm-sensors@lm-sensors.org
S: Maintained
+SMSC911x ETHERNET DRIVER
+P: Steve Glendinning
+M: steve.glendinning@smsc.com
+L: netdev@vger.kernel.org
+S: Supported
+
+SMSC9420 PCI ETHERNET DRIVER
+P: Steve Glendinning
+M: steve.glendinning@smsc.com
+L: netdev@vger.kernel.org
+S: Supported
+
SMX UIO Interface
P: Ben Nizette
M: bn@niasdigital.com
@@ -3977,7 +3999,7 @@ M: tiwai@suse.de
L: alsa-devel@alsa-project.org (subscribers-only)
S: Maintained
-SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT
+SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
P: Liam Girdwood
M: lrg@slimlogic.co.uk
P: Mark Brown
@@ -4529,7 +4551,7 @@ S: Maintained
USB VIDEO CLASS
P: Laurent Pinchart
M: laurent.pinchart@skynet.be
-L: linux-uvc-devel@lists.berlios.de
+L: linux-uvc-devel@lists.berlios.de (subscribers-only)
L: video4linux-list@redhat.com
W: http://linux-uvc.berlios.de
S: Maintained
diff --git a/Makefile b/Makefile
index 4c8d79710b84b9c6d58b36cd2269e3c5622765f0..09ff7d81809a79fe7ff04a4b29a66eb9cfe10648 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 28
-EXTRAVERSION = -rc9
+EXTRAVERSION =
NAME = Erotic Pickled Herring
# *DOCUMENTATION*
@@ -336,7 +336,7 @@ LINUXINCLUDE := -Iinclude \
-I$(srctree)/arch/$(hdr-arch)/include \
-include include/linux/autoconf.h
-KBUILD_CPPFLAGS := -D__KERNEL__ $(LINUXINCLUDE)
+KBUILD_CPPFLAGS := -D__KERNEL__
KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common \
@@ -439,7 +439,11 @@ ifeq ($(config-targets),1)
include $(srctree)/arch/$(SRCARCH)/Makefile
export KBUILD_DEFCONFIG KBUILD_KCONFIG
-config %config: scripts_basic outputmakefile FORCE
+config: scripts_basic outputmakefile FORCE
+ $(Q)mkdir -p include/linux include/config
+ $(Q)$(MAKE) $(build)=scripts/kconfig $@
+
+%config: scripts_basic outputmakefile FORCE
$(Q)mkdir -p include/linux include/config
$(Q)$(MAKE) $(build)=scripts/kconfig $@
@@ -600,20 +604,25 @@ export INSTALL_PATH ?= /boot
MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE)
export MODLIB
-#
-# INSTALL_MOD_STRIP, if defined, will cause modules to be
-# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then
-# the default option --strip-debug will be used. Otherwise,
-# INSTALL_MOD_STRIP will used as the options to the strip command.
+strip-symbols := $(srctree)/scripts/strip-symbols \
+ $(wildcard $(srctree)/arch/$(ARCH)/scripts/strip-symbols)
+#
+# INSTALL_MOD_STRIP, if defined, will cause modules to be stripped while
+# they get installed. If INSTALL_MOD_STRIP is '1', then the default
+# options (see below) will be used. Otherwise, INSTALL_MOD_STRIP will
+# be used as the option(s) to the objcopy command.
ifdef INSTALL_MOD_STRIP
ifeq ($(INSTALL_MOD_STRIP),1)
-mod_strip_cmd = $(STRIP) --strip-debug
+mod_strip_cmd = $(OBJCOPY) --strip-debug
+ifeq ($(CONFIG_KALLSYMS_ALL),$(CONFIG_KALLSYMS_STRIP_GENERATED))
+mod_strip_cmd += --wildcard $(addprefix --strip-symbols ,$(strip-symbols))
+endif
else
-mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP)
+mod_strip_cmd = $(OBJCOPY) $(INSTALL_MOD_STRIP)
endif # INSTALL_MOD_STRIP=1
else
-mod_strip_cmd = true
+mod_strip_cmd = false
endif # INSTALL_MOD_STRIP
export mod_strip_cmd
@@ -743,6 +752,7 @@ last_kallsyms := 2
endif
kallsyms.o := .tmp_kallsyms$(last_kallsyms).o
+kallsyms.h := $(wildcard include/config/kallsyms/*.h) $(wildcard include/config/kallsyms/*/*.h)
define verify_kallsyms
$(Q)$(if $($(quiet)cmd_sysmap), \
@@ -767,24 +777,41 @@ endef
# Generate .S file with all kernel symbols
quiet_cmd_kallsyms = KSYM $@
- cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \
- $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@
+ cmd_kallsyms = { test $* -eq 0 || $(NM) -n $<; } \
+ | $(KALLSYMS) $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) >$@
-.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE
+quiet_cmd_kstrip = STRIP $@
+ cmd_kstrip = $(OBJCOPY) --wildcard $(addprefix --strip$(if $(CONFIG_RELOCATABLE),-unneeded)-symbols ,$(filter %/scripts/strip-symbols,$^)) $< $@
+
+$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): KBUILD_AFLAGS += -Wa,--strip-local-absolute
+$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): %.o: %.S scripts FORCE
$(call if_changed_dep,as_o_S)
-.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS)
+ifeq ($(CONFIG_KALLSYMS_STRIP_GENERATED),y)
+strip-ext := .stripped
+endif
+
+.tmp_kallsyms%.S: .tmp_vmlinux%$(strip-ext) $(KALLSYMS) $(kallsyms.h)
$(call cmd,kallsyms)
+# make -jN seems to have problems with intermediate files, see bug #3330.
+.SECONDARY: $(foreach n,1 2 3,.tmp_vmlinux$(n).stripped)
+.tmp_vmlinux%.stripped: .tmp_vmlinux% $(strip-symbols) $(kallsyms.h)
+ $(call cmd,kstrip)
+
+ifneq ($(CONFIG_DEBUG_INFO),y)
+.tmp_vmlinux%: LDFLAGS_vmlinux += -S
+endif
# .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version
-.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE
- $(call if_changed_rule,ksym_ld)
+.tmp_vmlinux%: $(vmlinux-lds) $(vmlinux-all) FORCE
+ $(if $(filter 1,$*),$(call if_changed_rule,ksym_ld),$(call if_changed,vmlinux__))
-.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE
- $(call if_changed,vmlinux__)
+.tmp_vmlinux0$(strip-ext):
+ $(Q)echo "placeholder" >$@
-.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE
- $(call if_changed,vmlinux__)
+.tmp_vmlinux1: .tmp_kallsyms0.o
+.tmp_vmlinux2: .tmp_kallsyms1.o
+.tmp_vmlinux3: .tmp_kallsyms2.o
# Needs to visit scripts/ before $(KALLSYMS) can be used.
$(KALLSYMS): scripts ;
@@ -926,7 +953,7 @@ PHONY += prepare archprepare prepare0 prepare1 prepare2 prepare3
# 2) Create the include2 directory, used for the second asm symlink
prepare3: include/config/kernel.release
ifneq ($(KBUILD_SRC),)
- @echo ' Using $(srctree) as source for kernel'
+ @$(kecho) ' Using $(srctree) as source for kernel'
$(Q)if [ -f $(srctree)/.config -o -d $(srctree)/include/config ]; then \
echo " $(srctree) is not clean, please run 'make mrproper'";\
echo " in the '$(srctree)' directory.";\
@@ -983,7 +1010,7 @@ endef
# directory for generated filesas used by some architectures.
define create-symlink
if [ ! -L include/asm ]; then \
- echo ' SYMLINK $@ -> include/asm-$(SRCARCH)'; \
+ $(kecho) ' SYMLINK $@ -> include/asm-$(SRCARCH)'; \
if [ ! -d include/asm-$(SRCARCH) ]; then \
mkdir -p include/asm-$(SRCARCH); \
fi; \
@@ -1022,6 +1049,10 @@ include/linux/version.h: $(srctree)/Makefile FORCE
include/linux/utsrelease.h: include/config/kernel.release FORCE
$(call filechk,utsrelease.h)
+PHONY += headerdep
+headerdep:
+ $(Q)find include/ -name '*.h' | xargs --max-args 1 scripts/headerdep.pl
+
# ---------------------------------------------------------------------------
PHONY += depend dep
@@ -1096,7 +1127,7 @@ all: modules
PHONY += modules
modules: $(vmlinux-dirs) $(if $(KBUILD_BUILTIN),vmlinux)
$(Q)$(AWK) '!x[$$0]++' $(vmlinux-dirs:%=$(objtree)/%/modules.order) > $(objtree)/modules.order
- @echo ' Building modules, stage 2.';
+ @$(kecho) ' Building modules, stage 2.';
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.fwinst obj=firmware __fw_modbuild
@@ -1270,7 +1301,8 @@ help:
@echo ' versioncheck - Sanity check on version.h usage'
@echo ' includecheck - Check for duplicate included header files'
@echo ' export_report - List the usages of all exported symbols'
- @echo ' headers_check - Sanity check on exported headers'; \
+ @echo ' headers_check - Sanity check on exported headers'
+ @echo ' headerdep - Detect inclusion cycles in headers'; \
echo ''
@echo 'Kernel packaging:'
@$(MAKE) $(build)=$(package-dir) help
@@ -1360,7 +1392,7 @@ $(module-dirs): crmodverdir $(objtree)/Module.symvers
$(Q)$(MAKE) $(build)=$(patsubst _module_%,%,$@)
modules: $(module-dirs)
- @echo ' Building modules, stage 2.';
+ @$(kecho) ' Building modules, stage 2.';
$(Q)$(MAKE) -f $(srctree)/scripts/Makefile.modpost
PHONY += modules_install
@@ -1409,123 +1441,12 @@ endif # KBUILD_EXTMOD
# Generate tags for editors
# ---------------------------------------------------------------------------
+quiet_cmd_tags = GEN $@
+ cmd_tags = $(CONFIG_SHELL) $(srctree)/scripts/tags.sh $@
-#We want __srctree to totally vanish out when KBUILD_OUTPUT is not set
-#(which is the most common case IMHO) to avoid unneeded clutter in the big tags file.
-#Adding $(srctree) adds about 20M on i386 to the size of the output file!
-
-ifeq ($(src),$(obj))
-__srctree =
-else
-__srctree = $(srctree)/
-endif
-
-ifeq ($(ALLSOURCE_ARCHS),)
-ifeq ($(ARCH),um)
-ALLINCLUDE_ARCHS := $(ARCH) $(SUBARCH)
-else
-ALLINCLUDE_ARCHS := $(SRCARCH)
-endif
-else
-#Allow user to specify only ALLSOURCE_PATHS on the command line, keeping existing behaviour.
-ALLINCLUDE_ARCHS := $(ALLSOURCE_ARCHS)
-endif
-
-ALLSOURCE_ARCHS := $(SRCARCH)
-
-define find-sources
- ( for arch in $(ALLSOURCE_ARCHS) ; do \
- find $(__srctree)arch/$${arch} $(RCS_FIND_IGNORE) \
- -wholename $(__srctree)arch/$${arch}/include/asm -type d -prune \
- -o -name $1 -print; \
- done ; \
- find $(__srctree)security/selinux/include $(RCS_FIND_IGNORE) \
- -name $1 -print; \
- find $(__srctree)include $(RCS_FIND_IGNORE) \
- \( -name config -o -name 'asm-*' \) -prune \
- -o -name $1 -print; \
- for arch in $(ALLINCLUDE_ARCHS) ; do \
- test -e $(__srctree)include/asm-$${arch} && \
- find $(__srctree)include/asm-$${arch} $(RCS_FIND_IGNORE) \
- -name $1 -print; \
- test -e $(__srctree)arch/$${arch}/include/asm && \
- find $(__srctree)arch/$${arch}/include/asm $(RCS_FIND_IGNORE) \
- -name $1 -print; \
- done ; \
- find $(__srctree)include/asm-generic $(RCS_FIND_IGNORE) \
- -name $1 -print; \
- find $(__srctree) $(RCS_FIND_IGNORE) \
- \( -name include -o -name arch -o -name '.tmp_*' \) -prune -o \
- -name $1 -print; \
- )
-endef
-
-define all-sources
- $(call find-sources,'*.[chS]')
-endef
-define all-kconfigs
- $(call find-sources,'Kconfig*')
-endef
-define all-defconfigs
- $(call find-sources,'defconfig')
-endef
-
-define xtags
- if $1 --version 2>&1 | grep -iq exuberant; then \
- $(all-sources) | xargs $1 -a \
- -I __initdata,__exitdata,__acquires,__releases \
- -I __read_mostly,____cacheline_aligned,____cacheline_aligned_in_smp,____cacheline_internodealigned_in_smp \
- -I EXPORT_SYMBOL,EXPORT_SYMBOL_GPL \
- --extra=+f --c-kinds=+px \
- --regex-asm='/^ENTRY\(([^)]*)\).*/\1/'; \
- $(all-kconfigs) | xargs $1 -a \
- --langdef=kconfig \
- --language-force=kconfig \
- --regex-kconfig='/^[[:blank:]]*(menu|)config[[:blank:]]+([[:alnum:]_]+)/\2/'; \
- $(all-defconfigs) | xargs -r $1 -a \
- --langdef=dotconfig \
- --language-force=dotconfig \
- --regex-dotconfig='/^#?[[:blank:]]*(CONFIG_[[:alnum:]_]+)/\1/'; \
- elif $1 --version 2>&1 | grep -iq emacs; then \
- $(all-sources) | xargs $1 -a; \
- $(all-kconfigs) | xargs $1 -a \
- --regex='/^[ \t]*\(\(menu\)*config\)[ \t]+\([a-zA-Z0-9_]+\)/\3/'; \
- $(all-defconfigs) | xargs -r $1 -a \
- --regex='/^#?[ \t]?\(CONFIG_[a-zA-Z0-9_]+\)/\1/'; \
- else \
- $(all-sources) | xargs $1 -a; \
- fi
-endef
-
-quiet_cmd_cscope-file = FILELST cscope.files
- cmd_cscope-file = (echo \-k; echo \-q; $(all-sources)) > cscope.files
-
-quiet_cmd_cscope = MAKE cscope.out
- cmd_cscope = cscope -b -f cscope.out
-
-cscope: FORCE
- $(call cmd,cscope-file)
- $(call cmd,cscope)
-
-quiet_cmd_TAGS = MAKE $@
-define cmd_TAGS
- rm -f $@; \
- $(call xtags,etags)
-endef
-
-TAGS: FORCE
- $(call cmd,TAGS)
-
-quiet_cmd_tags = MAKE $@
-define cmd_tags
- rm -f $@; \
- $(call xtags,ctags)
-endef
-
-tags: FORCE
+tags TAGS cscope: FORCE
$(call cmd,tags)
-
# Scripts to check various things for consistency
# ---------------------------------------------------------------------------
@@ -1604,7 +1525,11 @@ endif
$(Q)$(MAKE) $(build)=$(build-dir) $(target-dir)$(notdir $@)
# Modules
-/ %/: prepare scripts FORCE
+/: prepare scripts FORCE
+ $(cmd_crmodverdir)
+ $(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
+ $(build)=$(build-dir)
+%/: prepare scripts FORCE
$(cmd_crmodverdir)
$(Q)$(MAKE) KBUILD_MODULES=$(if $(CONFIG_MODULES),1) \
$(build)=$(build-dir)
@@ -1638,7 +1563,7 @@ cmd_crmodverdir = $(Q)mkdir -p $(MODVERDIR) \
$(if $(KBUILD_MODULES),; rm -f $(MODVERDIR)/*)
a_flags = -Wp,-MD,$(depfile) $(KBUILD_AFLAGS) $(AFLAGS_KERNEL) \
- $(NOSTDINC_FLAGS) $(KBUILD_CPPFLAGS) \
+ $(NOSTDINC_FLAGS) $(LINUXINCLUDE) $(KBUILD_CPPFLAGS) \
$(modkern_aflags) $(EXTRA_AFLAGS) $(AFLAGS_$(basetarget).o)
quiet_cmd_as_o_S = AS $@
diff --git a/arch/alpha/kernel/asm-offsets.c b/arch/alpha/kernel/asm-offsets.c
index 4b18cd94d59d5060acfac02ad276101579ca481a..6ff8886e7e22b9c4af281abe417a99a88596a3d1 100644
--- a/arch/alpha/kernel/asm-offsets.c
+++ b/arch/alpha/kernel/asm-offsets.c
@@ -19,15 +19,18 @@ void foo(void)
BLANK();
DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
- DEFINE(TASK_UID, offsetof(struct task_struct, uid));
- DEFINE(TASK_EUID, offsetof(struct task_struct, euid));
- DEFINE(TASK_GID, offsetof(struct task_struct, gid));
- DEFINE(TASK_EGID, offsetof(struct task_struct, egid));
+ DEFINE(TASK_CRED, offsetof(struct task_struct, cred));
DEFINE(TASK_REAL_PARENT, offsetof(struct task_struct, real_parent));
DEFINE(TASK_GROUP_LEADER, offsetof(struct task_struct, group_leader));
DEFINE(TASK_TGID, offsetof(struct task_struct, tgid));
BLANK();
+ DEFINE(CRED_UID, offsetof(struct cred, uid));
+ DEFINE(CRED_EUID, offsetof(struct cred, euid));
+ DEFINE(CRED_GID, offsetof(struct cred, gid));
+ DEFINE(CRED_EGID, offsetof(struct cred, egid));
+ BLANK();
+
DEFINE(SIZEOF_PT_REGS, sizeof(struct pt_regs));
DEFINE(PT_PTRACED, PT_PTRACED);
DEFINE(CLONE_VM, CLONE_VM);
diff --git a/arch/alpha/kernel/entry.S b/arch/alpha/kernel/entry.S
index 5fc61e281ac77724cbcf0270b4269dd4559a686b..f77345bc66a975ff244c2e4b83be931fbc50a096 100644
--- a/arch/alpha/kernel/entry.S
+++ b/arch/alpha/kernel/entry.S
@@ -850,8 +850,9 @@ osf_getpriority:
sys_getxuid:
.prologue 0
ldq $2, TI_TASK($8)
- ldl $0, TASK_UID($2)
- ldl $1, TASK_EUID($2)
+ ldq $3, TASK_CRED($2)
+ ldl $0, CRED_UID($3)
+ ldl $1, CRED_EUID($3)
stq $1, 80($sp)
ret
.end sys_getxuid
@@ -862,8 +863,9 @@ sys_getxuid:
sys_getxgid:
.prologue 0
ldq $2, TI_TASK($8)
- ldl $0, TASK_GID($2)
- ldl $1, TASK_EGID($2)
+ ldq $3, TASK_CRED($2)
+ ldl $0, CRED_GID($3)
+ ldl $1, CRED_EGID($3)
stq $1, 80($sp)
ret
.end sys_getxgid
diff --git a/arch/arm/mach-ixp4xx/fsg-setup.c b/arch/arm/mach-ixp4xx/fsg-setup.c
index e7c6386782ede189976cb4cb6b59fa2b7af97497..5add22fc98999ac57b0da0f688926b4f65c0dcfc 100644
--- a/arch/arm/mach-ixp4xx/fsg-setup.c
+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -177,7 +177,6 @@ static irqreturn_t fsg_reset_handler(int irq, void *dev_id)
static void __init fsg_init(void)
{
- DECLARE_MAC_BUF(mac_buf);
uint8_t __iomem *f;
ixp4xx_sys_init();
@@ -256,10 +255,10 @@ static void __init fsg_init(void)
#endif
iounmap(f);
}
- printk(KERN_INFO "FSG: Using MAC address %s for port 0\n",
- print_mac(mac_buf, fsg_plat_eth[0].hwaddr));
- printk(KERN_INFO "FSG: Using MAC address %s for port 1\n",
- print_mac(mac_buf, fsg_plat_eth[1].hwaddr));
+ printk(KERN_INFO "FSG: Using MAC address %pM for port 0\n",
+ fsg_plat_eth[0].hwaddr);
+ printk(KERN_INFO "FSG: Using MAC address %pM for port 1\n",
+ fsg_plat_eth[1].hwaddr);
}
diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
index 1e52b95cede5518db0b73630cf65d2bc46f82315..0cbe6ceb67c5a012837221f8e9a95509689dea94 100644
--- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h
+++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h
@@ -12,6 +12,8 @@
#include
#include
+#define DEBUG_QMGR 0
+
#define HALF_QUEUES 32
#define QUEUES 64 /* only 32 lower queues currently supported */
#define MAX_QUEUE_LENGTH 4 /* in dwords */
@@ -61,22 +63,51 @@ void qmgr_enable_irq(unsigned int queue);
void qmgr_disable_irq(unsigned int queue);
/* request_ and release_queue() must be called from non-IRQ context */
+
+#if DEBUG_QMGR
+extern char qmgr_queue_descs[QUEUES][32];
+
int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
unsigned int nearly_empty_watermark,
- unsigned int nearly_full_watermark);
+ unsigned int nearly_full_watermark,
+ const char *desc_format, const char* name);
+#else
+int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
+ unsigned int nearly_empty_watermark,
+ unsigned int nearly_full_watermark);
+#define qmgr_request_queue(queue, len, nearly_empty_watermark, \
+ nearly_full_watermark, desc_format, name) \
+ __qmgr_request_queue(queue, len, nearly_empty_watermark, \
+ nearly_full_watermark)
+#endif
+
void qmgr_release_queue(unsigned int queue);
static inline void qmgr_put_entry(unsigned int queue, u32 val)
{
extern struct qmgr_regs __iomem *qmgr_regs;
+#if DEBUG_QMGR
+ BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
+
+ printk(KERN_DEBUG "Queue %s(%i) put %X\n",
+ qmgr_queue_descs[queue], queue, val);
+#endif
__raw_writel(val, &qmgr_regs->acc[queue][0]);
}
static inline u32 qmgr_get_entry(unsigned int queue)
{
+ u32 val;
extern struct qmgr_regs __iomem *qmgr_regs;
- return __raw_readl(&qmgr_regs->acc[queue][0]);
+ val = __raw_readl(&qmgr_regs->acc[queue][0]);
+#if DEBUG_QMGR
+ BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */
+
+ printk(KERN_DEBUG "Queue %s(%i) get %X\n",
+ qmgr_queue_descs[queue], queue, val);
+#endif
+ return val;
}
static inline int qmgr_get_stat1(unsigned int queue)
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
index c6cb069a5a83cea283e94dfc906f1ae81558a320..bfddc73d0a200b358b80761891106e5237b22799 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
@@ -14,8 +14,6 @@
#include
#include
-#define DEBUG 0
-
struct qmgr_regs __iomem *qmgr_regs;
static struct resource *mem_res;
static spinlock_t qmgr_lock;
@@ -23,6 +21,10 @@ static u32 used_sram_bitmap[4]; /* 128 16-dword pages */
static void (*irq_handlers[HALF_QUEUES])(void *pdev);
static void *irq_pdevs[HALF_QUEUES];
+#if DEBUG_QMGR
+char qmgr_queue_descs[QUEUES][32];
+#endif
+
void qmgr_set_irq(unsigned int queue, int src,
void (*handler)(void *pdev), void *pdev)
{
@@ -70,6 +72,7 @@ void qmgr_disable_irq(unsigned int queue)
spin_lock_irqsave(&qmgr_lock, flags);
__raw_writel(__raw_readl(&qmgr_regs->irqen[0]) & ~(1 << queue),
&qmgr_regs->irqen[0]);
+ __raw_writel(1 << queue, &qmgr_regs->irqstat[0]); /* clear */
spin_unlock_irqrestore(&qmgr_lock, flags);
}
@@ -81,9 +84,16 @@ static inline void shift_mask(u32 *mask)
mask[0] <<= 1;
}
+#if DEBUG_QMGR
int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
unsigned int nearly_empty_watermark,
- unsigned int nearly_full_watermark)
+ unsigned int nearly_full_watermark,
+ const char *desc_format, const char* name)
+#else
+int __qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
+ unsigned int nearly_empty_watermark,
+ unsigned int nearly_full_watermark)
+#endif
{
u32 cfg, addr = 0, mask[4]; /* in 16-dwords */
int err;
@@ -151,12 +161,13 @@ int qmgr_request_queue(unsigned int queue, unsigned int len /* dwords */,
used_sram_bitmap[2] |= mask[2];
used_sram_bitmap[3] |= mask[3];
__raw_writel(cfg | (addr << 14), &qmgr_regs->sram[queue]);
- spin_unlock_irq(&qmgr_lock);
-
-#if DEBUG
- printk(KERN_DEBUG "qmgr: requested queue %i, addr = 0x%02X\n",
- queue, addr);
+#if DEBUG_QMGR
+ snprintf(qmgr_queue_descs[queue], sizeof(qmgr_queue_descs[0]),
+ desc_format, name);
+ printk(KERN_DEBUG "qmgr: requested queue %s(%i) addr = 0x%02X\n",
+ qmgr_queue_descs[queue], queue, addr);
#endif
+ spin_unlock_irq(&qmgr_lock);
return 0;
err:
@@ -189,6 +200,11 @@ void qmgr_release_queue(unsigned int queue)
while (addr--)
shift_mask(mask);
+#if DEBUG_QMGR
+ printk(KERN_DEBUG "qmgr: releasing queue %s(%i)\n",
+ qmgr_queue_descs[queue], queue);
+ qmgr_queue_descs[queue][0] = '\x0';
+#endif
__raw_writel(0, &qmgr_regs->sram[queue]);
used_sram_bitmap[0] &= ~mask[0];
@@ -199,9 +215,10 @@ void qmgr_release_queue(unsigned int queue)
spin_unlock_irq(&qmgr_lock);
module_put(THIS_MODULE);
-#if DEBUG
- printk(KERN_DEBUG "qmgr: released queue %i\n", queue);
-#endif
+
+ while ((addr = qmgr_get_entry(queue)))
+ printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n",
+ queue, addr);
}
static int qmgr_init(void)
@@ -272,5 +289,10 @@ EXPORT_SYMBOL(qmgr_regs);
EXPORT_SYMBOL(qmgr_set_irq);
EXPORT_SYMBOL(qmgr_enable_irq);
EXPORT_SYMBOL(qmgr_disable_irq);
+#if DEBUG_QMGR
+EXPORT_SYMBOL(qmgr_queue_descs);
EXPORT_SYMBOL(qmgr_request_queue);
+#else
+EXPORT_SYMBOL(__qmgr_request_queue);
+#endif
EXPORT_SYMBOL(qmgr_release_queue);
diff --git a/arch/arm/mach-ixp4xx/nas100d-setup.c b/arch/arm/mach-ixp4xx/nas100d-setup.c
index 0acd95ecf27ef39e716a2c27cf470e30c666c640..921c947b5b6b33f170f279525cf8e87dfc0697a4 100644
--- a/arch/arm/mach-ixp4xx/nas100d-setup.c
+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
@@ -231,7 +231,6 @@ static irqreturn_t nas100d_reset_handler(int irq, void *dev_id)
static void __init nas100d_init(void)
{
- DECLARE_MAC_BUF(mac_buf);
uint8_t __iomem *f;
int i;
@@ -294,8 +293,8 @@ static void __init nas100d_init(void)
#endif
iounmap(f);
}
- printk(KERN_INFO "NAS100D: Using MAC address %s for port 0\n",
- print_mac(mac_buf, nas100d_plat_eth[0].hwaddr));
+ printk(KERN_INFO "NAS100D: Using MAC address %pM for port 0\n",
+ nas100d_plat_eth[0].hwaddr);
}
diff --git a/arch/arm/mach-ixp4xx/nslu2-setup.c b/arch/arm/mach-ixp4xx/nslu2-setup.c
index bc9d920ae54f0f28a58597682abcc0e9c0c99c5e..ff6a08d02cc42e8b050c3c91eced3b490ec92877 100644
--- a/arch/arm/mach-ixp4xx/nslu2-setup.c
+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
@@ -220,7 +220,6 @@ static struct sys_timer nslu2_timer = {
static void __init nslu2_init(void)
{
- DECLARE_MAC_BUF(mac_buf);
uint8_t __iomem *f;
int i;
@@ -275,8 +274,8 @@ static void __init nslu2_init(void)
#endif
iounmap(f);
}
- printk(KERN_INFO "NSLU2: Using MAC address %s for port 0\n",
- print_mac(mac_buf, nslu2_plat_eth[0].hwaddr));
+ printk(KERN_INFO "NSLU2: Using MAC address %pM for port 0\n",
+ nslu2_plat_eth[0].hwaddr);
}
diff --git a/arch/arm/mach-pxa/include/mach/palmasoc.h b/arch/arm/mach-pxa/include/mach/palmasoc.h
new file mode 100644
index 0000000000000000000000000000000000000000..6c4b1f7de20aa1f7e84bedc127e820e18f50ad21
--- /dev/null
+++ b/arch/arm/mach-pxa/include/mach/palmasoc.h
@@ -0,0 +1,13 @@
+#ifndef _INCLUDE_PALMASOC_H_
+#define _INCLUDE_PALMASOC_H_
+struct palm27x_asoc_info {
+ int jack_gpio;
+};
+
+#ifdef CONFIG_SND_PXA2XX_SOC_PALM27X
+void __init palm27x_asoc_set_pdata(struct palm27x_asoc_info *data);
+#else
+static inline void palm27x_asoc_set_pdata(struct palm27x_asoc_info *data) {}
+#endif
+
+#endif
diff --git a/arch/blackfin/boot/Makefile b/arch/blackfin/boot/Makefile
index 522f3c12406041128bdfedc6639bcfbfa7893f05..e028d13481a93660c9843cde769517500c8046f5 100644
--- a/arch/blackfin/boot/Makefile
+++ b/arch/blackfin/boot/Makefile
@@ -25,7 +25,7 @@ $(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
$(obj)/vmImage: $(obj)/vmlinux.gz
$(call if_changed,uimage)
- @echo 'Kernel: $@ is ready'
+ @$(kecho) 'Kernel: $@ is ready'
install:
sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
diff --git a/arch/ia64/Kconfig b/arch/ia64/Kconfig
index 6bd91ed7cd03a8366d35745a499ea89c9daf93a6..7fa8f615ba6e7edaec647959f8d4623fcab4bad5 100644
--- a/arch/ia64/Kconfig
+++ b/arch/ia64/Kconfig
@@ -99,7 +99,7 @@ config GENERIC_IOMAP
bool
default y
-config SCHED_NO_NO_OMIT_FRAME_POINTER
+config SCHED_OMIT_FRAME_POINTER
bool
default y
diff --git a/arch/ia64/hp/sim/simeth.c b/arch/ia64/hp/sim/simeth.c
index 3d47839a0c488c5625bb6903b68e74d31b0489e8..e4d8fde68103b84a18492b1a0d1a9a47c8fd9011 100644
--- a/arch/ia64/hp/sim/simeth.c
+++ b/arch/ia64/hp/sim/simeth.c
@@ -167,6 +167,15 @@ netdev_read(int fd, unsigned char *buf, unsigned int len)
return ia64_ssc(fd, __pa(buf), len, 0, SSC_NETDEV_RECV);
}
+static const struct net_device_ops simeth_netdev_ops = {
+ .ndo_open = simeth_open,
+ .ndo_stop = simeth_close,
+ .ndo_start_xmit = simeth_tx,
+ .ndo_get_stats = simeth_get_stats,
+ .ndo_set_multicast_list = set_multicast_list, /* not yet used */
+
+};
+
/*
* Function shared with module code, so cannot be in init section
*
@@ -206,14 +215,10 @@ simeth_probe1(void)
memcpy(dev->dev_addr, mac_addr, sizeof(mac_addr));
- local = dev->priv;
+ local = netdev_priv(dev);
local->simfd = fd; /* keep track of underlying file descriptor */
- dev->open = simeth_open;
- dev->stop = simeth_close;
- dev->hard_start_xmit = simeth_tx;
- dev->get_stats = simeth_get_stats;
- dev->set_multicast_list = set_multicast_list; /* no yet used */
+ dev->netdev_ops = &simeth_netdev_ops;
err = register_netdev(dev);
if (err) {
@@ -325,7 +330,7 @@ simeth_device_event(struct notifier_block *this,unsigned long event, void *ptr)
* we get DOWN then UP.
*/
- local = dev->priv;
+ local = netdev_priv(dev);
/* now do it for real */
r = event == NETDEV_UP ?
netdev_attach(local->simfd, dev->irq, ntohl(ifa->ifa_local)):
@@ -380,7 +385,7 @@ frame_print(unsigned char *from, unsigned char *frame, int len)
static int
simeth_tx(struct sk_buff *skb, struct net_device *dev)
{
- struct simeth_local *local = dev->priv;
+ struct simeth_local *local = netdev_priv(dev);
#if 0
/* ensure we have at least ETH_ZLEN bytes (min frame size) */
@@ -443,7 +448,7 @@ simeth_rx(struct net_device *dev)
int len;
int rcv_count = SIMETH_RECV_MAX;
- local = dev->priv;
+ local = netdev_priv(dev);
/*
* the loop concept has been borrowed from other drivers
* looks to me like it's a throttling thing to avoid pushing to many
@@ -507,7 +512,7 @@ simeth_interrupt(int irq, void *dev_id)
static struct net_device_stats *
simeth_get_stats(struct net_device *dev)
{
- struct simeth_local *local = dev->priv;
+ struct simeth_local *local = netdev_priv(dev);
return &local->stats;
}
diff --git a/arch/ia64/ia32/sys_ia32.c b/arch/ia64/ia32/sys_ia32.c
index 5e92ae00bdbba8403ee69ddd12d33ca44ce34699..16ef61a91d95810de82668fa23eefbd2d993a25c 100644
--- a/arch/ia64/ia32/sys_ia32.c
+++ b/arch/ia64/ia32/sys_ia32.c
@@ -1767,25 +1767,24 @@ groups16_from_user(struct group_info *group_info, short __user *grouplist)
asmlinkage long
sys32_getgroups16 (int gidsetsize, short __user *grouplist)
{
+ const struct cred *cred = current_cred();
int i;
if (gidsetsize < 0)
return -EINVAL;
- get_group_info(current->group_info);
- i = current->group_info->ngroups;
+ i = cred->group_info->ngroups;
if (gidsetsize) {
if (i > gidsetsize) {
i = -EINVAL;
goto out;
}
- if (groups16_to_user(grouplist, current->group_info)) {
+ if (groups16_to_user(grouplist, cred->group_info)) {
i = -EFAULT;
goto out;
}
}
out:
- put_group_info(current->group_info);
return i;
}
diff --git a/arch/ia64/kernel/mca_drv.c b/arch/ia64/kernel/mca_drv.c
index fab1d21a4f2c1cfe4443aa8812518d4a6bfeaeb6..f94aaa86933fd81f0b347466907e16bdfcf10781 100644
--- a/arch/ia64/kernel/mca_drv.c
+++ b/arch/ia64/kernel/mca_drv.c
@@ -158,7 +158,7 @@ mca_handler_bh(unsigned long paddr, void *iip, unsigned long ipsr)
ia64_mlogbuf_dump();
printk(KERN_ERR "OS_MCA: process [cpu %d, pid: %d, uid: %d, "
"iip: %p, psr: 0x%lx,paddr: 0x%lx](%s) encounters MCA.\n",
- raw_smp_processor_id(), current->pid, current->uid,
+ raw_smp_processor_id(), current->pid, current_uid(),
iip, ipsr, paddr, current->comm);
spin_lock(&mca_bh_lock);
diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c
index 6543a5547c84669434e5d4dbc3d962400a714f57..0e499757309bfbdab35d1233126e4259d9f42bdd 100644
--- a/arch/ia64/kernel/perfmon.c
+++ b/arch/ia64/kernel/perfmon.c
@@ -2220,8 +2220,8 @@ pfm_alloc_file(pfm_context_t *ctx)
DPRINT(("new inode ino=%ld @%p\n", inode->i_ino, inode));
inode->i_mode = S_IFCHR|S_IRUGO;
- inode->i_uid = current->fsuid;
- inode->i_gid = current->fsgid;
+ inode->i_uid = current_fsuid();
+ inode->i_gid = current_fsgid();
sprintf(name, "[%lu]", inode->i_ino);
this.name = name;
@@ -2399,22 +2399,33 @@ error_kmem:
static int
pfm_bad_permissions(struct task_struct *task)
{
+ const struct cred *tcred;
+ uid_t uid = current_uid();
+ gid_t gid = current_gid();
+ int ret;
+
+ rcu_read_lock();
+ tcred = __task_cred(task);
+
/* inspired by ptrace_attach() */
DPRINT(("cur: uid=%d gid=%d task: euid=%d suid=%d uid=%d egid=%d sgid=%d\n",
- current->uid,
- current->gid,
- task->euid,
- task->suid,
- task->uid,
- task->egid,
- task->sgid));
-
- return ((current->uid != task->euid)
- || (current->uid != task->suid)
- || (current->uid != task->uid)
- || (current->gid != task->egid)
- || (current->gid != task->sgid)
- || (current->gid != task->gid)) && !capable(CAP_SYS_PTRACE);
+ uid,
+ gid,
+ tcred->euid,
+ tcred->suid,
+ tcred->uid,
+ tcred->egid,
+ tcred->sgid));
+
+ ret = ((uid != tcred->euid)
+ || (uid != tcred->suid)
+ || (uid != tcred->uid)
+ || (gid != tcred->egid)
+ || (gid != tcred->sgid)
+ || (gid != tcred->gid)) && !capable(CAP_SYS_PTRACE);
+
+ rcu_read_unlock();
+ return ret;
}
static int
diff --git a/arch/ia64/kernel/signal.c b/arch/ia64/kernel/signal.c
index e12500a9c44390b025feeb0b670baac1c1ffd523..e1821ca4c7dfddea3827102e2bd63a016e1162f3 100644
--- a/arch/ia64/kernel/signal.c
+++ b/arch/ia64/kernel/signal.c
@@ -229,7 +229,7 @@ ia64_rt_sigreturn (struct sigscratch *scr)
si.si_errno = 0;
si.si_code = SI_KERNEL;
si.si_pid = task_pid_vnr(current);
- si.si_uid = current->uid;
+ si.si_uid = current_uid();
si.si_addr = sc;
force_sig_info(SIGSEGV, &si, current);
return retval;
@@ -326,7 +326,7 @@ force_sigsegv_info (int sig, void __user *addr)
si.si_errno = 0;
si.si_code = SI_KERNEL;
si.si_pid = task_pid_vnr(current);
- si.si_uid = current->uid;
+ si.si_uid = current_uid();
si.si_addr = addr;
force_sig_info(SIGSEGV, &si, current);
return 0;
diff --git a/arch/m32r/Kconfig b/arch/m32r/Kconfig
index dbaed4a638153bc43c5fa4d6e138039bb5cca8df..29047d5c259aa9a2f9622bf15f9baa1e3d21dfcc 100644
--- a/arch/m32r/Kconfig
+++ b/arch/m32r/Kconfig
@@ -273,7 +273,7 @@ config GENERIC_CALIBRATE_DELAY
bool
default y
-config SCHED_NO_NO_OMIT_FRAME_POINTER
+config SCHED_OMIT_FRAME_POINTER
bool
default y
diff --git a/arch/m68k/fpsp040/setox.S b/arch/m68k/fpsp040/setox.S
index 145af5447581f1f3719549dd9cf7494c02dc44be..f1acf7e36d6b826c77c167efdefaa5729b140977 100644
--- a/arch/m68k/fpsp040/setox.S
+++ b/arch/m68k/fpsp040/setox.S
@@ -36,9 +36,9 @@
| depending on their values, the program may run faster or slower --
| but no worse than 10% slower even in the extreme cases.
|
-| The program setoxm1 takes approximately ???/??? cycles for input
+| The program setoxm1 takes approximately ??? / ??? cycles for input
| argument X, 0.25 <= |X| < 70log2. For |X| < 0.25, it takes
-| approximately ???/??? cycles. For the less common arguments,
+| approximately ??? / ??? cycles. For the less common arguments,
| depending on their values, the program may run faster or slower --
| but no worse than 10% slower even in the extreme cases.
|
diff --git a/arch/m68k/mac/baboon.c b/arch/m68k/mac/baboon.c
index c7b25b0aacffab1a7f6212cf9e83103d2dd8198c..245d16d078ad817c93bacf94fc15f72803e8e337 100644
--- a/arch/m68k/mac/baboon.c
+++ b/arch/m68k/mac/baboon.c
@@ -18,11 +18,14 @@
#include
#include
-/* #define DEBUG_BABOON */
/* #define DEBUG_IRQS */
+extern void mac_enable_irq(unsigned int);
+extern void mac_disable_irq(unsigned int);
+
int baboon_present;
static volatile struct baboon *baboon;
+static unsigned char baboon_disabled;
#if 0
extern int macide_ack_intr(struct ata_channel *);
@@ -88,34 +91,51 @@ static irqreturn_t baboon_irq(int irq, void *dev_id)
void __init baboon_register_interrupts(void)
{
- request_irq(IRQ_NUBUS_C, baboon_irq, IRQ_FLG_LOCK|IRQ_FLG_FAST,
- "baboon", (void *) baboon);
+ baboon_disabled = 0;
+ request_irq(IRQ_NUBUS_C, baboon_irq, 0, "baboon", (void *)baboon);
}
-void baboon_irq_enable(int irq) {
+/*
+ * The means for masking individual baboon interrupts remains a mystery, so
+ * enable the umbrella interrupt only when no baboon interrupt is disabled.
+ */
+
+void baboon_irq_enable(int irq)
+{
+ int irq_idx = IRQ_IDX(irq);
+
#ifdef DEBUG_IRQUSE
printk("baboon_irq_enable(%d)\n", irq);
#endif
- /* FIXME: figure out how to mask and unmask baboon interrupt sources */
- enable_irq(IRQ_NUBUS_C);
+
+ baboon_disabled &= ~(1 << irq_idx);
+ if (!baboon_disabled)
+ mac_enable_irq(IRQ_NUBUS_C);
}
-void baboon_irq_disable(int irq) {
+void baboon_irq_disable(int irq)
+{
+ int irq_idx = IRQ_IDX(irq);
+
#ifdef DEBUG_IRQUSE
printk("baboon_irq_disable(%d)\n", irq);
#endif
- disable_irq(IRQ_NUBUS_C);
+
+ baboon_disabled |= 1 << irq_idx;
+ if (baboon_disabled)
+ mac_disable_irq(IRQ_NUBUS_C);
}
-void baboon_irq_clear(int irq) {
- int irq_idx = IRQ_IDX(irq);
+void baboon_irq_clear(int irq)
+{
+ int irq_idx = IRQ_IDX(irq);
baboon->mb_ifr &= ~(1 << irq_idx);
}
int baboon_irq_pending(int irq)
{
- int irq_idx = IRQ_IDX(irq);
+ int irq_idx = IRQ_IDX(irq);
return baboon->mb_ifr & (1 << irq_idx);
}
diff --git a/arch/m68k/mac/config.c b/arch/m68k/mac/config.c
index c45e18449f321b820f08dc12409dfadc0083cf60..8819b97be32401b096587de6dcdda41e504a1749 100644
--- a/arch/m68k/mac/config.c
+++ b/arch/m68k/mac/config.c
@@ -162,10 +162,7 @@ void __init config_mac(void)
mach_init_IRQ = mac_init_IRQ;
mach_get_model = mac_get_model;
mach_gettimeoffset = mac_gettimeoffset;
-#warning move to adb/via init
-#if 0
mach_hwclk = mac_hwclk;
-#endif
mach_set_clock_mmss = mac_set_clock_mmss;
mach_reset = mac_reset;
mach_halt = mac_poweroff;
diff --git a/arch/m68k/mac/debug.c b/arch/m68k/mac/debug.c
index 2165740786a551f2cb975d0fd359a79366ff08ad..65dd77a742a341c493a64982b16a0ec5de60d445 100644
--- a/arch/m68k/mac/debug.c
+++ b/arch/m68k/mac/debug.c
@@ -24,7 +24,6 @@
#define BOOTINFO_COMPAT_1_0
#include
#include
-#include
#include
extern unsigned long mac_videobase;
diff --git a/arch/m68k/mac/macints.c b/arch/m68k/mac/macints.c
index ecddac4a02b95abc11f80dbff860d2bdaea32fbd..82e560c076ce31e1cf82968ac3622f7c58c9a135 100644
--- a/arch/m68k/mac/macints.c
+++ b/arch/m68k/mac/macints.c
@@ -127,7 +127,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -215,8 +214,8 @@ irqreturn_t mac_debug_handler(int, void *);
/* #define DEBUG_MACINTS */
-static void mac_enable_irq(unsigned int irq);
-static void mac_disable_irq(unsigned int irq);
+void mac_enable_irq(unsigned int irq);
+void mac_disable_irq(unsigned int irq);
static struct irq_controller mac_irq_controller = {
.name = "mac",
@@ -275,7 +274,7 @@ void __init mac_init_IRQ(void)
* These routines are just dispatchers to the VIA/OSS/PSC routines.
*/
-static void mac_enable_irq(unsigned int irq)
+void mac_enable_irq(unsigned int irq)
{
int irq_src = IRQ_SRC(irq);
@@ -308,7 +307,7 @@ static void mac_enable_irq(unsigned int irq)
}
}
-static void mac_disable_irq(unsigned int irq)
+void mac_disable_irq(unsigned int irq)
{
int irq_src = IRQ_SRC(irq);
diff --git a/arch/m68k/mac/misc.c b/arch/m68k/mac/misc.c
index 56d1f5676ade43628f578c8786dd1e3bf7d1f818..a44c7086ab39a3b9352f2b3c5f0202b9e57bd471 100644
--- a/arch/m68k/mac/misc.c
+++ b/arch/m68k/mac/misc.c
@@ -93,7 +93,7 @@ static void cuda_write_pram(int offset, __u8 data)
#define cuda_write_pram NULL
#endif
-#ifdef CONFIG_ADB_PMU68K
+#if 0 /* def CONFIG_ADB_PMU68K */
static long pmu_read_time(void)
{
struct adb_request req;
@@ -148,7 +148,7 @@ static void pmu_write_pram(int offset, __u8 data)
#define pmu_write_pram NULL
#endif
-#ifdef CONFIG_ADB_MACIISI
+#if 0 /* def CONFIG_ADB_MACIISI */
extern int maciisi_request(struct adb_request *req,
void (*done)(struct adb_request *), int nbytes, ...);
@@ -717,13 +717,18 @@ int mac_hwclk(int op, struct rtc_time *t)
unmktime(now, 0,
&t->tm_year, &t->tm_mon, &t->tm_mday,
&t->tm_hour, &t->tm_min, &t->tm_sec);
+#if 0
printk("mac_hwclk: read %04d-%02d-%-2d %02d:%02d:%02d\n",
- t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
+ t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
+ t->tm_hour, t->tm_min, t->tm_sec);
+#endif
} else { /* write */
+#if 0
printk("mac_hwclk: tried to write %04d-%02d-%-2d %02d:%02d:%02d\n",
- t->tm_year + 1900, t->tm_mon + 1, t->tm_mday, t->tm_hour, t->tm_min, t->tm_sec);
+ t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
+ t->tm_hour, t->tm_min, t->tm_sec);
+#endif
-#if 0 /* it trashes my rtc */
now = mktime(t->tm_year + 1900, t->tm_mon + 1, t->tm_mday,
t->tm_hour, t->tm_min, t->tm_sec);
@@ -742,7 +747,6 @@ int mac_hwclk(int op, struct rtc_time *t)
case MAC_ADB_IISI:
maciisi_write_time(now);
}
-#endif
}
return 0;
}
diff --git a/arch/m68k/mac/oss.c b/arch/m68k/mac/oss.c
index 43d83e054b8e455888671e3b30b1f4240de501a7..8426501119ca82bf641b3098c4a726d696cc26bb 100644
--- a/arch/m68k/mac/oss.c
+++ b/arch/m68k/mac/oss.c
@@ -21,7 +21,6 @@
#include
#include
-#include
#include
#include
#include
diff --git a/arch/m68k/mac/via.c b/arch/m68k/mac/via.c
index 1bdb03c73c0f4d2c70d9e4251eb6b3280ed8ae9f..f01d418e64fed5c1fa6c67f9566577d774ec2785 100644
--- a/arch/m68k/mac/via.c
+++ b/arch/m68k/mac/via.c
@@ -32,15 +32,10 @@
#include
#include
#include
-#include
#include
#include
volatile __u8 *via1, *via2;
-#if 0
-/* See note in mac_via.h about how this is possibly not useful */
-volatile long *via_memory_bogon=(long *)&via_memory_bogon;
-#endif
int rbv_present;
int via_alt_mapping;
EXPORT_SYMBOL(via_alt_mapping);
@@ -66,7 +61,7 @@ static int gIER,gIFR,gBufA,gBufB;
#define MAC_CLOCK_LOW (MAC_CLOCK_TICK&0xFF)
#define MAC_CLOCK_HIGH (MAC_CLOCK_TICK>>8)
-/* To disable a NuBus slot on Quadras we make the slot IRQ lines outputs, set
+/* To disable a NuBus slot on Quadras we make that slot IRQ line an output set
* high. On RBV we just use the slot interrupt enable register. On Macs with
* genuine VIA chips we must use nubus_disabled to keep track of disabled slot
* interrupts. When any slot IRQ is disabled we mask the (edge triggered) CA1
@@ -180,7 +175,7 @@ void __init via_init(void)
via1[vT1CH] = 0;
via1[vT2CL] = 0;
via1[vT2CH] = 0;
- via1[vACR] &= 0x3F;
+ via1[vACR] &= ~0xC0; /* setup T1 timer with no PB7 output */
via1[vACR] &= ~0x03; /* disable port A & B latches */
/*
@@ -203,40 +198,41 @@ void __init via_init(void)
/* Everything below this point is VIA2/RBV only... */
- if (oss_present) return;
+ if (oss_present)
+ return;
-#if 1
/* Some machines support an alternate IRQ mapping that spreads */
/* Ethernet and Sound out to their own autolevel IRQs and moves */
/* VIA1 to level 6. A/UX uses this mapping and we do too. Note */
/* that the IIfx emulates this alternate mapping using the OSS. */
- switch(macintosh_config->ident) {
- case MAC_MODEL_P475:
- case MAC_MODEL_P475F:
- case MAC_MODEL_P575:
- case MAC_MODEL_Q605:
- case MAC_MODEL_Q605_ACC:
- case MAC_MODEL_C610:
- case MAC_MODEL_Q610:
- case MAC_MODEL_Q630:
- case MAC_MODEL_C650:
- case MAC_MODEL_Q650:
- case MAC_MODEL_Q700:
- case MAC_MODEL_Q800:
- case MAC_MODEL_Q900:
- case MAC_MODEL_Q950:
+ via_alt_mapping = 0;
+ if (macintosh_config->via_type == MAC_VIA_QUADRA)
+ switch (macintosh_config->ident) {
+ case MAC_MODEL_C660:
+ case MAC_MODEL_Q840:
+ /* not applicable */
+ break;
+ case MAC_MODEL_P588:
+ case MAC_MODEL_TV:
+ case MAC_MODEL_PB140:
+ case MAC_MODEL_PB145:
+ case MAC_MODEL_PB160:
+ case MAC_MODEL_PB165:
+ case MAC_MODEL_PB165C:
+ case MAC_MODEL_PB170:
+ case MAC_MODEL_PB180:
+ case MAC_MODEL_PB180C:
+ case MAC_MODEL_PB190:
+ case MAC_MODEL_PB520:
+ /* not yet tested */
+ break;
+ default:
via_alt_mapping = 1;
via1[vDirB] |= 0x40;
via1[vBufB] &= ~0x40;
break;
- default:
- via_alt_mapping = 0;
- break;
- }
-#else
- via_alt_mapping = 0;
-#endif
+ }
/*
* Now initialize VIA2. For RBV we just kill all interrupts;
@@ -252,14 +248,17 @@ void __init via_init(void)
via2[vT1CH] = 0;
via2[vT2CL] = 0;
via2[vT2CH] = 0;
- via2[vACR] &= 0x3F;
+ via2[vACR] &= ~0xC0; /* setup T1 timer with no PB7 output */
via2[vACR] &= ~0x03; /* disable port A & B latches */
}
/*
- * Set vPCR for SCSI interrupts (but not on RBV)
+ * Set vPCR for control line interrupts (but not on RBV)
*/
if (!rbv_present) {
+ /* For all VIA types, CA1 (SLOTS IRQ) and CB1 (ASC IRQ)
+ * are made negative edge triggered here.
+ */
if (macintosh_config->scsi_type == MAC_SCSI_OLD) {
/* CB2 (IRQ) indep. input, positive edge */
/* CA2 (DRQ) indep. input, positive edge */
@@ -466,21 +465,6 @@ irqreturn_t via1_irq(int irq, void *dev_id)
++irq_num;
irq_bit <<= 1;
} while (events >= irq_bit);
-
-#if 0 /* freakin' pmu is doing weird stuff */
- if (!oss_present) {
- /* This (still) seems to be necessary to get IDE
- working. However, if you enable VBL interrupts,
- you're screwed... */
- /* FIXME: should we check the SLOTIRQ bit before
- pulling this stunt? */
- /* No, it won't be set. that's why we're doing this. */
- via_irq_disable(IRQ_MAC_NUBUS);
- via_irq_clear(IRQ_MAC_NUBUS);
- m68k_handle_int(IRQ_MAC_NUBUS);
- via_irq_enable(IRQ_MAC_NUBUS);
- }
-#endif
return IRQ_HANDLED;
}
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index f4af967a6b3081173b9183d8e735d133382072c5..a5255e7c79e004001a8f55c82e33d964198b403f 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -653,7 +653,7 @@ config GENERIC_CMOS_UPDATE
bool
default y
-config SCHED_NO_NO_OMIT_FRAME_POINTER
+config SCHED_OMIT_FRAME_POINTER
bool
default y
diff --git a/arch/mips/include/asm/byteorder.h b/arch/mips/include/asm/byteorder.h
index 2988d29a0867f4c0ce187040e710e3c87344030d..33790b9e0cc0d46ee41f0ec8d3f3dbf181c8a9fc 100644
--- a/arch/mips/include/asm/byteorder.h
+++ b/arch/mips/include/asm/byteorder.h
@@ -50,9 +50,8 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x)
static inline __attribute_const__ __u64 __arch_swab64(__u64 x)
{
__asm__(
- " dsbh %0, %1 \n"
- " dshd %0, %0 \n"
- " drotr %0, %0, 32 \n"
+ " dsbh %0, %1\n"
+ " dshd %0, %0"
: "=r" (x)
: "r" (x));
diff --git a/arch/mips/include/asm/elf.h b/arch/mips/include/asm/elf.h
index a8eac1697b3ddcf05dccc71d42267c549cc40904..d58f128aa747be974ac10ffd5fb1749d3292f505 100644
--- a/arch/mips/include/asm/elf.h
+++ b/arch/mips/include/asm/elf.h
@@ -232,7 +232,7 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
*/
#ifdef __MIPSEB__
#define ELF_DATA ELFDATA2MSB
-#elif __MIPSEL__
+#elif defined(__MIPSEL__)
#define ELF_DATA ELFDATA2LSB
#endif
#define ELF_ARCH EM_MIPS
diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c
index b0591ae0ce566456ed7c88eaa955d191a17bcaaa..fd6e512240347aac0a17b848cd9e1b42657badaf 100644
--- a/arch/mips/kernel/kspd.c
+++ b/arch/mips/kernel/kspd.c
@@ -174,8 +174,8 @@ static unsigned int translate_open_flags(int flags)
static void sp_setfsuidgid( uid_t uid, gid_t gid)
{
- current->fsuid = uid;
- current->fsgid = gid;
+ current->cred->fsuid = uid;
+ current->cred->fsgid = gid;
key_fsuid_changed(current);
key_fsgid_changed(current);
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index dc9eb72ed9de956164f557b0757496dae6638c2e..5e77a3a21f98e7926cc789915ad65bbe64911a1a 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -51,6 +51,7 @@ asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
int retval;
struct task_struct *p;
struct thread_info *ti;
+ uid_t euid;
if (len < sizeof(new_mask))
return -EINVAL;
@@ -76,9 +77,9 @@ asmlinkage long mipsmt_sys_sched_setaffinity(pid_t pid, unsigned int len,
*/
get_task_struct(p);
+ euid = current_euid();
retval = -EPERM;
- if ((current->euid != p->euid) && (current->euid != p->uid) &&
- !capable(CAP_SYS_NICE)) {
+ if (euid != p->euid && euid != p->uid && !capable(CAP_SYS_NICE)) {
read_unlock(&tasklist_lock);
goto out_unlock;
}
diff --git a/arch/mips/kernel/vpe.c b/arch/mips/kernel/vpe.c
index a1b3da6bad5cb17c577712ac4bf83f439b5d7292..010b27e01f7bf9c03dd1b55c64fe15ca69c14100 100644
--- a/arch/mips/kernel/vpe.c
+++ b/arch/mips/kernel/vpe.c
@@ -1085,8 +1085,8 @@ static int vpe_open(struct inode *inode, struct file *filp)
v->load_addr = NULL;
v->len = 0;
- v->uid = filp->f_uid;
- v->gid = filp->f_gid;
+ v->uid = filp->f_cred->fsuid;
+ v->gid = filp->f_cred->fsgid;
#ifdef CONFIG_MIPS_APSP_KSPD
/* get kspd to tell us when a syscall_exit happens */
diff --git a/arch/parisc/include/asm/tlbflush.h b/arch/parisc/include/asm/tlbflush.h
index b72ec66db699e56f0985ebd6d88d82a7ceb14411..1f6fd4fc05b91b518f4f574b3ada13ddd24b285a 100644
--- a/arch/parisc/include/asm/tlbflush.h
+++ b/arch/parisc/include/asm/tlbflush.h
@@ -44,9 +44,12 @@ static inline void flush_tlb_mm(struct mm_struct *mm)
{
BUG_ON(mm == &init_mm); /* Should never happen */
-#ifdef CONFIG_SMP
+#if 1 || defined(CONFIG_SMP)
flush_tlb_all();
#else
+ /* FIXME: currently broken, causing space id and protection ids
+ * to go out of sync, resulting in faults on userspace accesses.
+ */
if (mm) {
if (mm->context != 0)
free_sid(mm->context);
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index 06213d1d6d958f54d8a3139f9443aab13a5bbaed..f82544225e8e8b43b8ca76664101a849d1e8a7f7 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -182,7 +182,7 @@ give_sigsegv:
si.si_errno = 0;
si.si_code = SI_KERNEL;
si.si_pid = task_pid_vnr(current);
- si.si_uid = current->uid;
+ si.si_uid = current_uid();
si.si_addr = &frame->uc;
force_sig_info(SIGSEGV, &si, current);
return;
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 525c13a4de93ede9cd9451569d41cd20760b3636..79f25cef32dfe72b0d230ce6642ce95c747f080d 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -141,7 +141,7 @@ config GENERIC_NVRAM
bool
default y if PPC32
-config SCHED_NO_NO_OMIT_FRAME_POINTER
+config SCHED_OMIT_FRAME_POINTER
bool
default y
@@ -285,6 +285,10 @@ config IOMMU_VMERGE
config IOMMU_HELPER
def_bool PPC64
+config PPC_NEED_DMA_SYNC_OPS
+ def_bool y
+ depends on NOT_COHERENT_CACHE
+
config HOTPLUG_CPU
bool "Support for enabling/disabling CPUs"
depends on SMP && HOTPLUG && EXPERIMENTAL && (PPC_PSERIES || PPC_PMAC)
@@ -322,7 +326,7 @@ config KEXEC
config CRASH_DUMP
bool "Build a kdump crash kernel"
- depends on PPC_MULTIPLATFORM && PPC64 && RELOCATABLE
+ depends on (PPC64 && RELOCATABLE) || 6xx
help
Build a kernel suitable for use as a kdump capture kernel.
The same kernel binary can be used as production kernel and dump
@@ -401,23 +405,53 @@ config PPC_HAS_HASH_64K
depends on PPC64
default n
-config PPC_64K_PAGES
- bool "64k page size"
- depends on PPC64
- select PPC_HAS_HASH_64K
+choice
+ prompt "Page size"
+ default PPC_4K_PAGES
help
- This option changes the kernel logical page size to 64k. On machines
- without processor support for 64k pages, the kernel will simulate
- them by loading each individual 4k page on demand transparently,
- while on hardware with such support, it will be used to map
- normal application pages.
+ Select the kernel logical page size. Increasing the page size
+ will reduce software overhead at each page boundary, allow
+ hardware prefetch mechanisms to be more effective, and allow
+ larger dma transfers increasing IO efficiency and reducing
+ overhead. However the utilization of memory will increase.
+ For example, each cached file will using a multiple of the
+ page size to hold its contents and the difference between the
+ end of file and the end of page is wasted.
+
+ Some dedicated systems, such as software raid serving with
+ accelerated calculations, have shown significant increases.
+
+ If you configure a 64 bit kernel for 64k pages but the
+ processor does not support them, then the kernel will simulate
+ them with 4k pages, loading them on demand, but with the
+ reduced software overhead and larger internal fragmentation.
+ For the 32 bit kernel, a large page option will not be offered
+ unless it is supported by the configured processor.
+
+ If unsure, choose 4K_PAGES.
+
+config PPC_4K_PAGES
+ bool "4k page size"
+
+config PPC_16K_PAGES
+ bool "16k page size" if 44x
+
+config PPC_64K_PAGES
+ bool "64k page size" if 44x || PPC_STD_MMU_64
+ select PPC_HAS_HASH_64K if PPC_STD_MMU_64
+
+endchoice
config FORCE_MAX_ZONEORDER
int "Maximum zone order"
- range 9 64 if PPC_64K_PAGES
- default "9" if PPC_64K_PAGES
- range 13 64 if PPC64 && !PPC_64K_PAGES
- default "13" if PPC64 && !PPC_64K_PAGES
+ range 9 64 if PPC_STD_MMU_64 && PPC_64K_PAGES
+ default "9" if PPC_STD_MMU_64 && PPC_64K_PAGES
+ range 13 64 if PPC_STD_MMU_64 && !PPC_64K_PAGES
+ default "13" if PPC_STD_MMU_64 && !PPC_64K_PAGES
+ range 9 64 if PPC_STD_MMU_32 && PPC_16K_PAGES
+ default "9" if PPC_STD_MMU_32 && PPC_16K_PAGES
+ range 7 64 if PPC_STD_MMU_32 && PPC_64K_PAGES
+ default "7" if PPC_STD_MMU_32 && PPC_64K_PAGES
range 11 64
default "11"
help
@@ -437,7 +471,7 @@ config FORCE_MAX_ZONEORDER
config PPC_SUBPAGE_PROT
bool "Support setting protections for 4k subpages"
- depends on PPC_64K_PAGES
+ depends on PPC_STD_MMU_64 && PPC_64K_PAGES
help
This option adds support for a system call to allow user programs
to set access permissions (read/write, readonly, or no access)
diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug
index 15eb27861fc713c1b02995fd030bc139652b24d2..08f7cc0a1953a2c3bae6c88e165f44e50379c23d 100644
--- a/arch/powerpc/Kconfig.debug
+++ b/arch/powerpc/Kconfig.debug
@@ -2,6 +2,15 @@ menu "Kernel hacking"
source "lib/Kconfig.debug"
+config PRINT_STACK_DEPTH
+ int "Stack depth to print" if DEBUG_KERNEL
+ default 64
+ help
+ This option allows you to set the stack depth that the kernel
+ prints in stack traces. This can be useful if your display is
+ too small and stack traces cause important information to
+ scroll off the screen.
+
config DEBUG_STACKOVERFLOW
bool "Check for stack overflows"
depends on DEBUG_KERNEL
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 1f06670699404aafb55cb990b148bd4ba4a14f41..72d17f50e54fa7befc6b920fb781d393dd04a98a 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -107,7 +107,6 @@ KBUILD_CFLAGS += $(call cc-option,-mno-altivec)
# (We use all available options to help semi-broken compilers)
KBUILD_CFLAGS += $(call cc-option,-mno-spe)
KBUILD_CFLAGS += $(call cc-option,-mspe=no)
-KBUILD_CFLAGS += $(call cc-option,-mabi=no-spe)
# Enable unit-at-a-time mode when possible. It shrinks the
# kernel considerably.
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 3d3daa674299038072e3d8e7f2d36f3181b5cb1f..f32829937aad4a8a60ed5aa521d94537cfd10510 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -194,6 +194,7 @@ image-$(CONFIG_PPC_MAPLE) += zImage.pseries
image-$(CONFIG_PPC_IBM_CELL_BLADE) += zImage.pseries
image-$(CONFIG_PPC_PS3) += dtbImage.ps3
image-$(CONFIG_PPC_CELLEB) += zImage.pseries
+image-$(CONFIG_PPC_CELL_QPACE) += zImage.pseries
image-$(CONFIG_PPC_CHRP) += zImage.chrp
image-$(CONFIG_PPC_EFIKA) += zImage.chrp
image-$(CONFIG_PPC_PMAC) += zImage.pmac
diff --git a/arch/powerpc/boot/devtree.c b/arch/powerpc/boot/devtree.c
index 5d12336dc3609d9d0cb9df0089f273ffc7fabe77..a7e21a35c03af6a7bd584cccf6b140f85157d7cf 100644
--- a/arch/powerpc/boot/devtree.c
+++ b/arch/powerpc/boot/devtree.c
@@ -213,7 +213,7 @@ static int find_range(u32 *reg, u32 *ranges, int nregaddr,
u32 range_addr[MAX_ADDR_CELLS];
u32 range_size[MAX_ADDR_CELLS];
- copy_val(range_addr, ranges + i, naddr);
+ copy_val(range_addr, ranges + i, nregaddr);
copy_val(range_size, ranges + i + nregaddr + naddr, nsize);
if (compare_reg(reg, range_addr, range_size))
diff --git a/arch/powerpc/boot/dts/asp834x-redboot.dts b/arch/powerpc/boot/dts/asp834x-redboot.dts
index 6235fca445de43ec0418cc2beb8c0bf91919bff3..524af7ef9f26742e388aa7b6f21adbe75df2b8e5 100644
--- a/arch/powerpc/boot/dts/asp834x-redboot.dts
+++ b/arch/powerpc/boot/dts/asp834x-redboot.dts
@@ -199,8 +199,26 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
@@ -210,6 +228,7 @@
local-mac-address = [ 00 08 e5 11 32 33 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
linux,network-index = <0>;
};
@@ -223,6 +242,7 @@
local-mac-address = [ 00 08 e5 11 32 34 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
linux,network-index = <1>;
};
diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts
index 6ce0cc2c0208e311e7924903d511f1c998a9ce4c..aa68911f6560a21449d19c283d0c0388016c5429 100644
--- a/arch/powerpc/boot/dts/bamboo.dts
+++ b/arch/powerpc/boot/dts/bamboo.dts
@@ -269,7 +269,8 @@
* later cannot be changed. Chip supports a second
* IO range but we don't use it for now
*/
- ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x20000000
+ ranges = <0x02000000 0x00000000 0xa0000000 0x00000000 0xa0000000 0x00000000 0x40000000
+ 0x02000000 0x00000000 0x00000000 0x00000000 0xe0000000 0x00000000 0x00100000
0x01000000 0x00000000 0x00000000 0x00000000 0xe8000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
diff --git a/arch/powerpc/boot/dts/canyonlands.dts b/arch/powerpc/boot/dts/canyonlands.dts
index 79fe412c11c9c0d0dfcf14b737492095129c4197..8b5ba8261a36ad54d80863881da214d3bc273d71 100644
--- a/arch/powerpc/boot/dts/canyonlands.dts
+++ b/arch/powerpc/boot/dts/canyonlands.dts
@@ -40,6 +40,7 @@
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
+ next-level-cache = <&L2C0>;
};
};
@@ -104,6 +105,16 @@
dcr-reg = <0x00c 0x002>;
};
+ L2C0: l2c {
+ compatible = "ibm,l2-cache-460ex", "ibm,l2-cache";
+ dcr-reg = <0x020 0x008 /* Internal SRAM DCR's */
+ 0x030 0x008>; /* L2 cache DCR's */
+ cache-line-size = <32>; /* 32 bytes */
+ cache-size = <262144>; /* L2, 256K */
+ interrupt-parent = <&UIC1>;
+ interrupts = <11 1>;
+ };
+
plb {
compatible = "ibm,plb-460ex", "ibm,plb4";
#address-cells = <2>;
@@ -343,6 +354,7 @@
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000d 0x80000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000c 0x0ee00000 0x00000000 0x00100000
0x01000000 0x00000000 0x00000000 0x0000000c 0x08000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
@@ -373,6 +385,7 @@
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x00000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000f 0x00000000 0x00000000 0x00100000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80000000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
@@ -414,6 +427,7 @@
* later cannot be changed
*/
ranges = <0x02000000 0x00000000 0x80000000 0x0000000e 0x80000000 0x00000000 0x80000000
+ 0x02000000 0x00000000 0x00000000 0x0000000f 0x00100000 0x00000000 0x00100000
0x01000000 0x00000000 0x00000000 0x0000000f 0x80010000 0x00000000 0x00010000>;
/* Inbound 2GB range starting at 0 */
diff --git a/arch/powerpc/boot/dts/gef_sbc610.dts b/arch/powerpc/boot/dts/gef_sbc610.dts
index e48cfa740c8aebaa35cb1cc7453bf0e607ea64a9..9708b3423bbdc11615a481f572af7792e38d0bbe 100644
--- a/arch/powerpc/boot/dts/gef_sbc610.dts
+++ b/arch/powerpc/boot/dts/gef_sbc610.dts
@@ -98,6 +98,12 @@
interrupt-parent = <&mpic>;
};
+ gef_gpio: gpio@7,14000 {
+ #gpio-cells = <2>;
+ compatible = "gef,sbc610-gpio";
+ reg = <0x7 0x14000 0x24>;
+ gpio-controller;
+ };
};
soc@fef00000 {
@@ -119,6 +125,11 @@
interrupt-parent = <&mpic>;
dfsrr;
+ rtc@51 {
+ compatible = "epson,rx8581";
+ reg = <0x00000051>;
+ };
+
eti@6b {
compatible = "dallas,ds1682";
reg = <0x6b>;
diff --git a/arch/powerpc/boot/dts/ksi8560.dts b/arch/powerpc/boot/dts/ksi8560.dts
index 49737589ffc81f65778a2dbf4a8476427ab49e09..3bfff47418db434c1520637b557d7812ad62b9ae 100644
--- a/arch/powerpc/boot/dts/ksi8560.dts
+++ b/arch/powerpc/boot/dts/ksi8560.dts
@@ -141,8 +141,26 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+
enet0: ethernet@24000 {
device_type = "network";
model = "TSEC";
@@ -152,6 +170,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&PHY1>;
};
@@ -164,6 +183,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&PHY2>;
};
diff --git a/arch/powerpc/boot/dts/kuroboxHD.dts b/arch/powerpc/boot/dts/kuroboxHD.dts
index 2e5a1a1812b6343fa2e82f806a3b99527c9354b7..8d725d10882f3959e82c6271640d8fc4cf32b60d 100644
--- a/arch/powerpc/boot/dts/kuroboxHD.dts
+++ b/arch/powerpc/boot/dts/kuroboxHD.dts
@@ -76,7 +76,6 @@ XXXX add flash parts, rtc, ??
interrupt-parent = <&mpic>;
rtc@32 {
- device_type = "rtc";
compatible = "ricoh,rs5c372a";
reg = <0x32>;
};
diff --git a/arch/powerpc/boot/dts/kuroboxHG.dts b/arch/powerpc/boot/dts/kuroboxHG.dts
index e4916e69ad31fc33d9768875d679252a996144b1..b13a11eb81b01883769451405aca54a0cfe730b6 100644
--- a/arch/powerpc/boot/dts/kuroboxHG.dts
+++ b/arch/powerpc/boot/dts/kuroboxHG.dts
@@ -76,7 +76,6 @@ XXXX add flash parts, rtc, ??
interrupt-parent = <&mpic>;
rtc@32 {
- device_type = "rtc";
compatible = "ricoh,rs5c372a";
reg = <0x32>;
};
diff --git a/arch/powerpc/boot/dts/lite5200.dts b/arch/powerpc/boot/dts/lite5200.dts
index 2cf9a8768f4482218fe71eb1c2f368aeb3f9220f..3f7a5dce8de0bc397bde3177927cd65667118f1f 100644
--- a/arch/powerpc/boot/dts/lite5200.dts
+++ b/arch/powerpc/boot/dts/lite5200.dts
@@ -130,7 +130,6 @@
rtc@800 { // Real time clock
compatible = "fsl,mpc5200-rtc";
- device_type = "rtc";
reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
interrupt-parent = <&mpc5200_pic>;
diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts
index 7bd5b9c399b8fe2933c171cb7c7790b1f0cb54a3..63e3bb48e843980953aa844b64862e7910f4a3f6 100644
--- a/arch/powerpc/boot/dts/lite5200b.dts
+++ b/arch/powerpc/boot/dts/lite5200b.dts
@@ -130,7 +130,6 @@
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
- device_type = "rtc";
reg = <0x800 0x100>;
interrupts = <1 5 0 1 6 0>;
interrupt-parent = <&mpc5200_pic>;
diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts
index 9e3c921be16473b79934384b6145c97b17a3e186..52ba6f98b27311d351c114118cc4333a06474396 100644
--- a/arch/powerpc/boot/dts/motionpro.dts
+++ b/arch/powerpc/boot/dts/motionpro.dts
@@ -248,7 +248,6 @@
fsl5200-clocking;
rtc@68 {
- device_type = "rtc";
compatible = "dallas,ds1339";
reg = <0x68>;
};
diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts
index 503031766825362e63a2691e0d98df1cd4611405..d4df8b6857a447c790a2f0f3e508bae22ca3e5ae 100644
--- a/arch/powerpc/boot/dts/mpc8313erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8313erdb.dts
@@ -190,6 +190,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 0x8 36 0x8 35 0x8>;
interrupt-parent = <&ipic>;
+ tbi-handle = < &tbi0 >;
phy-handle = < &phy1 >;
fsl,magic-packet;
@@ -210,6 +211,10 @@
reg = <0x4>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
};
@@ -222,9 +227,24 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <34 0x8 33 0x8 32 0x8>;
interrupt-parent = <&ipic>;
+ tbi-handle = < &tbi1 >;
phy-handle = < &phy4 >;
sleep = <&pmc 0x10000000>;
fsl,magic-packet;
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts
index 6b850670de1df9da01b043dac83dea9c3afa550d..072c9b0f8c8e837845e8bb9af1b5a433186e675d 100644
--- a/arch/powerpc/boot/dts/mpc8315erdb.dts
+++ b/arch/powerpc/boot/dts/mpc8315erdb.dts
@@ -117,7 +117,6 @@
interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
- device_type = "rtc";
compatible = "dallas,ds1339";
reg = <0x68>;
};
@@ -206,8 +205,25 @@
reg = <0x1>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
+
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
@@ -217,6 +233,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
phy-handle = < &phy0 >;
};
@@ -229,6 +246,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi1>;
phy-handle = < &phy1 >;
};
diff --git a/arch/powerpc/boot/dts/mpc8349emitx.dts b/arch/powerpc/boot/dts/mpc8349emitx.dts
index 4bdbaf4993a185c176000890f1c999108f6b2f11..b5eda94a8e2aa3afb1b108b138de1ff68cb5ed6f 100644
--- a/arch/powerpc/boot/dts/mpc8349emitx.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitx.dts
@@ -85,7 +85,6 @@
dfsrr;
rtc@68 {
- device_type = "rtc";
compatible = "dallas,ds1339";
reg = <0x68>;
interrupts = <18 0x8>;
@@ -184,6 +183,22 @@
reg = <0x1c>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -195,6 +210,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy1c>;
linux,network-index = <0>;
};
@@ -211,6 +227,7 @@
/* Vitesse 7385 isn't on the MDIO bus */
fixed-link = <1 1 1000 0 0>;
linux,network-index = <1>;
+ tbi-handle = <&tbi1>;
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8349emitxgp.dts b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
index fa40647ee62e9bb74ef363ff6c2c9962b8a6dac2..c87a6015e165a9ac5aaf4f57fef1f76900e8ede8 100644
--- a/arch/powerpc/boot/dts/mpc8349emitxgp.dts
+++ b/arch/powerpc/boot/dts/mpc8349emitxgp.dts
@@ -83,7 +83,6 @@
dfsrr;
rtc@68 {
- device_type = "rtc";
compatible = "dallas,ds1339";
reg = <0x68>;
interrupts = <18 0x8>;
@@ -163,6 +162,10 @@
reg = <0x1c>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -174,6 +177,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy1c>;
linux,network-index = <0>;
};
diff --git a/arch/powerpc/boot/dts/mpc834x_mds.dts b/arch/powerpc/boot/dts/mpc834x_mds.dts
index c986c541e9bba8b9d013ede8db8e2017dc9ee6ee..d9adba01c09c7564898dca8bd5a2f3fd9e1e9c26 100644
--- a/arch/powerpc/boot/dts/mpc834x_mds.dts
+++ b/arch/powerpc/boot/dts/mpc834x_mds.dts
@@ -185,8 +185,25 @@
reg = <0x1>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
+
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
@@ -196,6 +213,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
linux,network-index = <0>;
};
@@ -209,6 +227,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
linux,network-index = <1>;
};
diff --git a/arch/powerpc/boot/dts/mpc8377_mds.dts b/arch/powerpc/boot/dts/mpc8377_mds.dts
index 0484561bd2c022aab258f40a2ea523144c663339..1d14d7052e6d534711ae067fe3dee07b89f6ed84 100644
--- a/arch/powerpc/boot/dts/mpc8377_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8377_mds.dts
@@ -193,8 +193,25 @@
reg = <0x3>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
+
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
@@ -205,6 +222,7 @@
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@@ -218,6 +236,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
};
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 435ef3dd022d0f3614f85e7bbcffced5c0102cd7..9413af3b99259c14fa1ea9127896d89f20dd5dcb 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -117,7 +117,6 @@
interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
- device_type = "rtc";
compatible = "dallas,ds1339";
reg = <0x68>;
};
@@ -211,8 +210,25 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
+
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
@@ -223,6 +239,7 @@
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@@ -237,6 +254,7 @@
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>;
+ tbi-handle = <&tbi1>;
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8378_mds.dts b/arch/powerpc/boot/dts/mpc8378_mds.dts
index 67a08d2e2ff254fff684ecfc550cd73e680f0318..b85fc02682d250991d3af01c3966dcd859704901 100644
--- a/arch/powerpc/boot/dts/mpc8378_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8378_mds.dts
@@ -232,8 +232,25 @@
reg = <0x3>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
+
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
@@ -244,6 +261,7 @@
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@@ -257,6 +275,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
};
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index b11e68f56a0612d302ce61bee6d2c56f03f01f3b..23c10ce22c2cd6b95597e52a975eed284d54ddea 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -117,7 +117,6 @@
interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
- device_type = "rtc";
compatible = "dallas,ds1339";
reg = <0x68>;
};
@@ -211,8 +210,25 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
+
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
diff --git a/arch/powerpc/boot/dts/mpc8379_mds.dts b/arch/powerpc/boot/dts/mpc8379_mds.dts
index 323370a2b5ff6fa38266e593b66110f8230fc33c..acf06c438dbf60bc5beb736a373ec7b24ce5a0af 100644
--- a/arch/powerpc/boot/dts/mpc8379_mds.dts
+++ b/arch/powerpc/boot/dts/mpc8379_mds.dts
@@ -232,6 +232,22 @@
reg = <0x3>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -244,6 +260,7 @@
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@@ -257,6 +274,7 @@
interrupts = <35 0x8 36 0x8 37 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
};
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index 337af6ea26d3817247543fa94ddddba9ee135ee9..72cdc3c4c7e36190e2c7c144c414e53d855165b4 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -117,7 +117,6 @@
interrupt-parent = <&ipic>;
dfsrr;
rtc@68 {
- device_type = "rtc";
compatible = "dallas,ds1339";
reg = <0x68>;
};
@@ -211,6 +210,22 @@
reg = <0x2>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -223,6 +238,7 @@
interrupts = <32 0x8 33 0x8 34 0x8>;
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@@ -237,6 +253,7 @@
phy-connection-type = "mii";
interrupt-parent = <&ipic>;
fixed-link = <1 1 1000 0 0>;
+ tbi-handle = <&tbi1>;
};
serial0: serial@4500 {
diff --git a/arch/powerpc/boot/dts/mpc8536ds.dts b/arch/powerpc/boot/dts/mpc8536ds.dts
index 35db1e5440c7631928562337ac2f043f82e6f55a..3c905df1812ca1d50844e50f857d974505f12618 100644
--- a/arch/powerpc/boot/dts/mpc8536ds.dts
+++ b/arch/powerpc/boot/dts/mpc8536ds.dts
@@ -155,6 +155,22 @@
reg = <1>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
usb@22000 {
@@ -186,6 +202,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
@@ -199,6 +216,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
diff --git a/arch/powerpc/boot/dts/mpc8540ads.dts b/arch/powerpc/boot/dts/mpc8540ads.dts
index 9568bfaff8f74aab49f18c3526edbfa5655b9a13..79570ffe41b9e46179779044b8df213ed195cc34 100644
--- a/arch/powerpc/boot/dts/mpc8540ads.dts
+++ b/arch/powerpc/boot/dts/mpc8540ads.dts
@@ -150,6 +150,34 @@
reg = <0x3>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -161,6 +189,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
@@ -173,6 +202,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
@@ -185,6 +215,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <41 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
phy-handle = <&phy3>;
};
diff --git a/arch/powerpc/boot/dts/mpc8541cds.dts b/arch/powerpc/boot/dts/mpc8541cds.dts
index 6480f4fd96e09f3d7f7a7cab0a5b0daa0c68c6b5..221036a8ce236ca1a808274a0a9c874ba8cfb703 100644
--- a/arch/powerpc/boot/dts/mpc8541cds.dts
+++ b/arch/powerpc/boot/dts/mpc8541cds.dts
@@ -144,6 +144,22 @@
reg = <0x1>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -155,6 +171,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
@@ -167,6 +184,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
diff --git a/arch/powerpc/boot/dts/mpc8544ds.dts b/arch/powerpc/boot/dts/mpc8544ds.dts
index f1fb20737e3ef35db6bfb247e7953cce2dbb6ca2..b9da42105066d37bd7a9432d530127a1d8aa100b 100644
--- a/arch/powerpc/boot/dts/mpc8544ds.dts
+++ b/arch/powerpc/boot/dts/mpc8544ds.dts
@@ -116,8 +116,26 @@
reg = <0x1>;
device_type = "ethernet-phy";
};
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+
dma@21300 {
#address-cells = <1>;
#size-cells = <1>;
@@ -169,6 +187,7 @@
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy0>;
+ tbi-handle = <&tbi0>;
phy-connection-type = "rgmii-id";
};
@@ -182,6 +201,7 @@
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
phy-handle = <&phy1>;
+ tbi-handle = <&tbi1>;
phy-connection-type = "rgmii-id";
};
diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts
index 431b496270dc47359e323f79e6e36e1049e9599f..df774a7088ffd409d8f3e3e921bbdab2d8287ee3 100644
--- a/arch/powerpc/boot/dts/mpc8548cds.dts
+++ b/arch/powerpc/boot/dts/mpc8548cds.dts
@@ -172,6 +172,46 @@
reg = <0x3>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@27520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x27520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -183,6 +223,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
@@ -195,6 +236,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
@@ -208,6 +250,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
};
@@ -220,6 +263,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
};
*/
diff --git a/arch/powerpc/boot/dts/mpc8555cds.dts b/arch/powerpc/boot/dts/mpc8555cds.dts
index d833a5c4f4766508988d716b6426eff4677c8049..053b01e1c93bf4d5603098a1d61098b1c225322c 100644
--- a/arch/powerpc/boot/dts/mpc8555cds.dts
+++ b/arch/powerpc/boot/dts/mpc8555cds.dts
@@ -144,6 +144,22 @@
reg = <0x1>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -155,6 +171,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
@@ -167,6 +184,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
diff --git a/arch/powerpc/boot/dts/mpc8560ads.dts b/arch/powerpc/boot/dts/mpc8560ads.dts
index 4d1f2f28409439d118a552f97103bb861bc55946..11b1bcbe14cedaf47e297265bde1230fbcb84a1c 100644
--- a/arch/powerpc/boot/dts/mpc8560ads.dts
+++ b/arch/powerpc/boot/dts/mpc8560ads.dts
@@ -145,6 +145,22 @@
reg = <0x3>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -156,6 +172,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
@@ -168,6 +185,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
diff --git a/arch/powerpc/boot/dts/mpc8568mds.dts b/arch/powerpc/boot/dts/mpc8568mds.dts
index c80158f7741db22f93c3f969492c10c706e18bb1..1955bd9e113d9d605d7264f790f669197a715074 100644
--- a/arch/powerpc/boot/dts/mpc8568mds.dts
+++ b/arch/powerpc/boot/dts/mpc8568mds.dts
@@ -179,6 +179,22 @@
reg = <0x3>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -190,6 +206,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@@ -202,6 +219,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy3>;
};
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index 5c69b2fafd32c588e64b0bb1ec1f257010477b18..21459e161d02ee0513a6db3c44e928eb884d401f 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -63,6 +63,119 @@
device_type = "memory";
};
+ localbus@ffe05000 {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ reg = <0 0xffe05000 0 0x1000>;
+ interrupts = <19 2>;
+ interrupt-parent = <&mpic>;
+
+ ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+ 0x1 0x0 0x0 0xe0000000 0x08000000
+ 0x2 0x0 0x0 0xffa00000 0x00040000
+ 0x3 0x0 0x0 0xffdf0000 0x00008000
+ 0x4 0x0 0x0 0xffa40000 0x00040000
+ 0x5 0x0 0x0 0xffa80000 0x00040000
+ 0x6 0x0 0x0 0xffac0000 0x00040000>;
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ ramdisk@0 {
+ reg = <0x0 0x03000000>;
+ readl-only;
+ };
+
+ diagnostic@3000000 {
+ reg = <0x03000000 0x00e00000>;
+ read-only;
+ };
+
+ dink@3e00000 {
+ reg = <0x03e00000 0x00200000>;
+ read-only;
+ };
+
+ kernel@4000000 {
+ reg = <0x04000000 0x00400000>;
+ read-only;
+ };
+
+ jffs2@4400000 {
+ reg = <0x04400000 0x03b00000>;
+ };
+
+ dtb@7f00000 {
+ reg = <0x07f00000 0x00080000>;
+ read-only;
+ };
+
+ u-boot@7f80000 {
+ reg = <0x07f80000 0x00080000>;
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ u-boot@0 {
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ jffs2@2000000 {
+ reg = <0x02000000 0x10000000>;
+ };
+
+ ramdisk@12000000 {
+ reg = <0x12000000 0x08000000>;
+ read-only;
+ };
+
+ kernel@1a000000 {
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ dtb@1e000000 {
+ reg = <0x1e000000 0x01000000>;
+ read-only;
+ };
+
+ empty@1f000000 {
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ nand@4,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x4 0x0 0x40000>;
+ };
+
+ nand@5,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x5 0x0 0x40000>;
+ };
+
+ nand@6,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x6 0x0 0x40000>;
+ };
+ };
+
soc8572@ffe00000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -225,6 +338,47 @@
interrupts = <10 1>;
reg = <0x3>;
};
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@27520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x27520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -236,6 +390,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
@@ -249,6 +404,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
@@ -262,6 +418,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
};
@@ -275,6 +432,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
new file mode 100644
index 0000000000000000000000000000000000000000..c114c4ee99313755602e53f8dac45799b6974008
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -0,0 +1,483 @@
+/*
+ * MPC8572 DS Core0 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts file allows core0 to have memory, l2, i2c, dma1, global-util, eth0,
+ * eth1, crypto, pci0, pci1.
+ *
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "fsl,MPC8572DS";
+ compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ serial0 = &serial0;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8572@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ next-level-cache = <&L2>;
+ };
+
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>; // Filled by U-Boot
+ };
+
+ soc8572@ffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x0 0xffe00000 0x100000>;
+ reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
+ bus-frequency = <0>; // Filled out by uboot.
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ memory-controller@6000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x6000 0x1000>;
+ interrupt-parent = <&mpic>;
+ interrupts = <18 2>;
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8572-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupt-parent = <&mpic>;
+ interrupts = <16 2>;
+ };
+
+ i2c@3000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <0>;
+ compatible = "fsl-i2c";
+ reg = <0x3000 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ i2c@3100 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cell-index = <1>;
+ compatible = "fsl-i2c";
+ reg = <0x3100 0x100>;
+ interrupts = <43 2>;
+ interrupt-parent = <&mpic>;
+ dfsrr;
+ };
+
+ dma@21300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+ reg = <0x21300 0x4>;
+ ranges = <0x0 0x21100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <20 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <21 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <22 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <23 2>;
+ };
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+
+ phy0: ethernet-phy@0 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupt-parent = <&mpic>;
+ interrupts = <10 1>;
+ reg = <0x1>;
+ };
+ };
+
+ enet0: ethernet@24000 {
+ cell-index = <0>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x24000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <29 2 30 2 34 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet1: ethernet@25000 {
+ cell-index = <1>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x25000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <35 2 36 2 40 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ serial0: serial@4500 {
+ cell-index = <0>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4500 0x100>;
+ clock-frequency = <0>;
+ };
+
+ global-utilities@e0000 { //global utilities block
+ compatible = "fsl,mpc8572-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+
+ crypto@30000 {
+ compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
+ "fsl,sec2.1", "fsl,sec2.0";
+ reg = <0x30000 0x10000>;
+ interrupts = <45 2 58 2>;
+ interrupt-parent = <&mpic>;
+ fsl,num-channels = <4>;
+ fsl,channel-fifo-len = <24>;
+ fsl,exec-units-mask = <0x9fe>;
+ fsl,descriptor-types-mask = <0x3ab0ebf>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ protected-sources = <
+ 31 32 33 37 38 39 /* enet2 enet3 */
+ 76 77 78 79 27 42 /* dma2 pci2 serial*/
+ 0xe0 0xe1 0xe2 0xe3 /* msi */
+ 0xe4 0xe5 0xe6 0xe7
+ >;
+ };
+ };
+
+ pci0: pcie@ffe08000 {
+ cell-index = <0>;
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xffe08000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <24 2>;
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x11 func 0 - PCI slot 1 */
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 func 1 - PCI slot 1 */
+ 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 func 2 - PCI slot 1 */
+ 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 func 3 - PCI slot 1 */
+ 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 func 4 - PCI slot 1 */
+ 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 func 5 - PCI slot 1 */
+ 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 func 6 - PCI slot 1 */
+ 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x11 func 7 - PCI slot 1 */
+ 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
+ 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
+ 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
+ 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
+
+ /* IDSEL 0x12 func 0 - PCI slot 2 */
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x12 func 1 - PCI slot 2 */
+ 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x12 func 2 - PCI slot 2 */
+ 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x12 func 3 - PCI slot 2 */
+ 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x12 func 4 - PCI slot 2 */
+ 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x12 func 5 - PCI slot 2 */
+ 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x12 func 6 - PCI slot 2 */
+ 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ /* IDSEL 0x12 func 7 - PCI slot 2 */
+ 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
+ 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
+ 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
+ 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
+
+ // IDSEL 0x1c USB
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+
+ >;
+
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+
+ };
+
+ pci1: pcie@ffe09000 {
+ cell-index = <1>;
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xffe09000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <26 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1
+ >;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xa0000000
+ 0x2000000 0x0 0xa0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
new file mode 100644
index 0000000000000000000000000000000000000000..04ecda18d2066cd18861fafd099c980ad17bd15b
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -0,0 +1,234 @@
+/*
+ * MPC8572 DS Core1 Device Tree Source in CAMP mode.
+ *
+ * In CAMP mode, each core needs to have its own dts. Only mpic and L2 cache
+ * can be shared, all the other devices must be assigned to one core only.
+ * This dts allows core1 to have l2, dma2, eth2, eth3, pci2, msi.
+ *
+ * Please note to add "-b 1" for core1's dts compiling.
+ *
+ * Copyright 2007, 2008 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+ model = "fsl,MPC8572DS";
+ compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ serial0 = &serial0;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8572@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ d-cache-line-size = <32>; // 32 bytes
+ i-cache-line-size = <32>; // 32 bytes
+ d-cache-size = <0x8000>; // L1, 32K
+ i-cache-size = <0x8000>; // L1, 32K
+ timebase-frequency = <0>;
+ bus-frequency = <0>;
+ clock-frequency = <0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x0>; // Filled by U-Boot
+ };
+
+ soc8572@ffe00000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "simple-bus";
+ ranges = <0x0 0xffe00000 0x100000>;
+ reg = <0xffe00000 0x1000>; // CCSRBAR & soc regs, remove once parse code for immrbase fixed
+ bus-frequency = <0>; // Filled out by uboot.
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8572-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x80000>; // L2, 512K
+ interrupt-parent = <&mpic>;
+ };
+
+ dma@c300 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
+ reg = <0xc300 0x4>;
+ ranges = <0x0 0xc100 0x200>;
+ cell-index = <0>;
+ dma-channel@0 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x0 0x80>;
+ cell-index = <0>;
+ interrupt-parent = <&mpic>;
+ interrupts = <76 2>;
+ };
+ dma-channel@80 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x80 0x80>;
+ cell-index = <1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <77 2>;
+ };
+ dma-channel@100 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x100 0x80>;
+ cell-index = <2>;
+ interrupt-parent = <&mpic>;
+ interrupts = <78 2>;
+ };
+ dma-channel@180 {
+ compatible = "fsl,mpc8572-dma-channel",
+ "fsl,eloplus-dma-channel";
+ reg = <0x180 0x80>;
+ cell-index = <3>;
+ interrupt-parent = <&mpic>;
+ interrupts = <79 2>;
+ };
+ };
+
+ mdio@24520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-mdio";
+ reg = <0x24520 0x20>;
+
+ phy2: ethernet-phy@2 {
+ interrupt-parent = <&mpic>;
+ reg = <0x2>;
+ };
+ phy3: ethernet-phy@3 {
+ interrupt-parent = <&mpic>;
+ reg = <0x3>;
+ };
+ };
+
+ enet2: ethernet@26000 {
+ cell-index = <2>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x26000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <31 2 32 2 33 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ enet3: ethernet@27000 {
+ cell-index = <3>;
+ device_type = "network";
+ model = "eTSEC";
+ compatible = "gianfar";
+ reg = <0x27000 0x1000>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ interrupts = <37 2 38 2 39 2>;
+ interrupt-parent = <&mpic>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ msi@41600 {
+ compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
+ reg = <0x41600 0x80>;
+ msi-available-ranges = <0 0x100>;
+ interrupts = <
+ 0xe0 0
+ 0xe1 0
+ 0xe2 0
+ 0xe3 0
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ serial0: serial@4600 {
+ cell-index = <1>;
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x4600 0x100>;
+ clock-frequency = <0>;
+ };
+
+ mpic: pic@40000 {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ reg = <0x40000 0x40000>;
+ compatible = "chrp,open-pic";
+ device_type = "open-pic";
+ protected-sources = <
+ 18 16 10 42 45 58 /* MEM L2 mdio serial crypto */
+ 29 30 34 35 36 40 /* enet0 enet1 */
+ 24 26 20 21 22 23 /* pcie0 pcie1 dma1 */
+ 43 /* i2c */
+ 0x1 0x2 0x3 0x4 /* pci slot */
+ 0x9 0xa 0xb 0xc /* usb */
+ 0x6 0x7 0xe 0x5 /* Audio elgacy SATA */
+ >;
+ };
+ };
+
+ pci2: pcie@ffe0a000 {
+ cell-index = <2>;
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = <0xffe0a000 0x1000>;
+ bus-range = <0 255>;
+ ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
+ 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupts = <27 2>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1
+ >;
+ pcie@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ ranges = <0x2000000 0x0 0xc0000000
+ 0x2000000 0x0 0xc0000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x100000>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8641_hpcn.dts b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
index d665e767822a8cfcd2d8371721f5c320c6325034..35d5e248ccd7939768ce2bd14e8a54cc5101353f 100644
--- a/arch/powerpc/boot/dts/mpc8641_hpcn.dts
+++ b/arch/powerpc/boot/dts/mpc8641_hpcn.dts
@@ -205,8 +205,49 @@
reg = <3>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@27520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x27520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
+
enet0: ethernet@24000 {
cell-index = <0>;
device_type = "network";
@@ -216,6 +257,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
@@ -229,6 +271,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
@@ -242,6 +285,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
};
@@ -255,6 +299,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
};
diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts
index 7c1bb952360cf8af82c6593c8b0cbf7bcd6694f0..be2c11ca05944de59a21a936ee4d08f8439a771b 100644
--- a/arch/powerpc/boot/dts/pcm030.dts
+++ b/arch/powerpc/boot/dts/pcm030.dts
@@ -143,7 +143,6 @@
rtc@800 { // Real time clock
compatible = "fsl,mpc5200b-rtc","fsl,mpc5200-rtc";
- device_type = "rtc";
reg = <0x800 0x100>;
interrupts = <0x1 0x5 0x0 0x1 0x6 0x0>;
interrupt-parent = <&mpc5200_pic>;
@@ -301,7 +300,6 @@
interrupt-parent = <&mpc5200_pic>;
fsl5200-clocking;
rtc@51 {
- device_type = "rtc";
compatible = "nxp,pcf8563";
reg = <0x51>;
};
diff --git a/arch/powerpc/boot/dts/sbc8349.dts b/arch/powerpc/boot/dts/sbc8349.dts
index 0f941f310e444ae2d209f8195b7f71525cb07ad4..8d365a57ebc122bbc4aefce181a30c1ae638daa7 100644
--- a/arch/powerpc/boot/dts/sbc8349.dts
+++ b/arch/powerpc/boot/dts/sbc8349.dts
@@ -177,6 +177,22 @@
reg = <0x1a>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -188,6 +204,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <32 0x8 33 0x8 34 0x8>;
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
linux,network-index = <0>;
};
@@ -201,6 +218,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 0x8 36 0x8 37 0x8>;
interrupt-parent = <&ipic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
linux,network-index = <1>;
};
diff --git a/arch/powerpc/boot/dts/sbc8548.dts b/arch/powerpc/boot/dts/sbc8548.dts
index 333552b4e90dd1d417ebe31cbf3c5ef0d248aab2..2baf4a51f224a9c7a63792182a0d837d6fad4624 100644
--- a/arch/powerpc/boot/dts/sbc8548.dts
+++ b/arch/powerpc/boot/dts/sbc8548.dts
@@ -252,6 +252,22 @@
reg = <0x1a>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -263,6 +279,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
@@ -275,6 +292,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
diff --git a/arch/powerpc/boot/dts/sbc8560.dts b/arch/powerpc/boot/dts/sbc8560.dts
index db3632ef9888f3270a4885ba647f88bceb9c8ac8..01542f7062abf7d6cb428ac9eadefbd8e117adab 100644
--- a/arch/powerpc/boot/dts/sbc8560.dts
+++ b/arch/powerpc/boot/dts/sbc8560.dts
@@ -168,6 +168,22 @@
reg = <0x1c>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -179,6 +195,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
};
@@ -191,6 +208,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <0x23 0x2 0x24 0x2 0x28 0x2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
diff --git a/arch/powerpc/boot/dts/sbc8641d.dts b/arch/powerpc/boot/dts/sbc8641d.dts
index 9652456158fbac84db0da31f7e7825e61bcabd9f..36db981548e4754768ecbc4c69f780d4a7b46381 100644
--- a/arch/powerpc/boot/dts/sbc8641d.dts
+++ b/arch/powerpc/boot/dts/sbc8641d.dts
@@ -222,6 +222,46 @@
reg = <2>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@27520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x27520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -233,6 +273,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy0>;
phy-connection-type = "rgmii-id";
};
@@ -246,6 +287,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
@@ -259,6 +301,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
phy-handle = <&phy2>;
phy-connection-type = "rgmii-id";
};
@@ -272,6 +315,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi3>;
phy-handle = <&phy3>;
phy-connection-type = "rgmii-id";
};
diff --git a/arch/powerpc/boot/dts/stx_gp3_8560.dts b/arch/powerpc/boot/dts/stx_gp3_8560.dts
index fcd1db6ca0a8e10ea0860c349e75882ac9c473fb..fff33fe6efc61211449673e24f9fc85f4a21d7b8 100644
--- a/arch/powerpc/boot/dts/stx_gp3_8560.dts
+++ b/arch/powerpc/boot/dts/stx_gp3_8560.dts
@@ -142,6 +142,22 @@
reg = <4>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -153,6 +169,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@@ -165,6 +182,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy4>;
};
diff --git a/arch/powerpc/boot/dts/tqm5200.dts b/arch/powerpc/boot/dts/tqm5200.dts
index 3008bf8830c1a1579115d8d4d362c4d7c7a2ff3a..906302e26a6225f5f0ff1ca5b731adf68368f8e0 100644
--- a/arch/powerpc/boot/dts/tqm5200.dts
+++ b/arch/powerpc/boot/dts/tqm5200.dts
@@ -181,7 +181,6 @@
fsl5200-clocking;
rtc@68 {
- device_type = "rtc";
compatible = "dallas,ds1307";
reg = <0x68>;
};
diff --git a/arch/powerpc/boot/dts/tqm8540.dts b/arch/powerpc/boot/dts/tqm8540.dts
index e1d260b9085eeaaf8a3b3e0620a2a6408d5a145f..a693f01c21aa6874f0688437425da6622094522b 100644
--- a/arch/powerpc/boot/dts/tqm8540.dts
+++ b/arch/powerpc/boot/dts/tqm8540.dts
@@ -155,6 +155,34 @@
reg = <3>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
diff --git a/arch/powerpc/boot/dts/tqm8541.dts b/arch/powerpc/boot/dts/tqm8541.dts
index d76441ec5dc72f1599ced341d2356062538da9b5..9e3f5f0dde2002049b531600c52a48f61a53f4a9 100644
--- a/arch/powerpc/boot/dts/tqm8541.dts
+++ b/arch/powerpc/boot/dts/tqm8541.dts
@@ -154,6 +154,22 @@
reg = <3>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -165,6 +181,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@@ -177,6 +194,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
diff --git a/arch/powerpc/boot/dts/tqm8548-bigflash.dts b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
index 4199e89b4e50cdf871ca2ff51f74f3e7be7ba541..15086eb65c507cf039c920ee91d84117b189bb75 100644
--- a/arch/powerpc/boot/dts/tqm8548-bigflash.dts
+++ b/arch/powerpc/boot/dts/tqm8548-bigflash.dts
@@ -179,6 +179,46 @@
reg = <5>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@27520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x27520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -190,6 +230,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@@ -202,6 +243,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
@@ -214,6 +256,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
phy-handle = <&phy3>;
};
@@ -226,6 +269,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi3>;
phy-handle = <&phy4>;
};
diff --git a/arch/powerpc/boot/dts/tqm8548.dts b/arch/powerpc/boot/dts/tqm8548.dts
index 58ee4185454b233f32f3bca4195303d7ddd5e20f..b7b65f5e79b654a024c1b1cff191b28d01c65bfb 100644
--- a/arch/powerpc/boot/dts/tqm8548.dts
+++ b/arch/powerpc/boot/dts/tqm8548.dts
@@ -179,6 +179,46 @@
reg = <5>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@26520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x26520 0x20>;
+
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@27520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x27520 0x20>;
+
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -190,6 +230,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@@ -202,6 +243,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
@@ -214,6 +256,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <31 2 32 2 33 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi2>;
phy-handle = <&phy3>;
};
@@ -226,6 +269,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <37 2 38 2 39 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi3>;
phy-handle = <&phy4>;
};
diff --git a/arch/powerpc/boot/dts/tqm8555.dts b/arch/powerpc/boot/dts/tqm8555.dts
index 6f7ea59c4846e05c783b4076349cc29cb6c09185..cf92b4e7945e3d6fa61b57907929692ac48b29d0 100644
--- a/arch/powerpc/boot/dts/tqm8555.dts
+++ b/arch/powerpc/boot/dts/tqm8555.dts
@@ -154,6 +154,22 @@
reg = <3>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -165,6 +181,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@@ -177,6 +194,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
diff --git a/arch/powerpc/boot/dts/tqm8560.dts b/arch/powerpc/boot/dts/tqm8560.dts
index 3fe35208907b9cfe317d64642223fba9ed8467b5..9e1ab2d2f669b003d7b676a312aac96a0b8bfbe3 100644
--- a/arch/powerpc/boot/dts/tqm8560.dts
+++ b/arch/powerpc/boot/dts/tqm8560.dts
@@ -156,6 +156,22 @@
reg = <3>;
device_type = "ethernet-phy";
};
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ mdio@25520 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,gianfar-tbi";
+ reg = <0x25520 0x20>;
+
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
};
enet0: ethernet@24000 {
@@ -167,6 +183,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <29 2 30 2 34 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi0>;
phy-handle = <&phy2>;
};
@@ -179,6 +196,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <35 2 36 2 40 2>;
interrupt-parent = <&mpic>;
+ tbi-handle = <&tbi1>;
phy-handle = <&phy1>;
};
diff --git a/arch/powerpc/boot/libfdt-wrapper.c b/arch/powerpc/boot/libfdt-wrapper.c
index 9276327bc2bb1995343dabf417f2c3927386cd95..bb8b9b3505eecd5ce694371f0ababf41f4cf65b1 100644
--- a/arch/powerpc/boot/libfdt-wrapper.c
+++ b/arch/powerpc/boot/libfdt-wrapper.c
@@ -185,7 +185,7 @@ void fdt_init(void *blob)
/* Make sure the dt blob is the right version and so forth */
fdt = blob;
- bufsize = fdt_totalsize(fdt) + 4;
+ bufsize = fdt_totalsize(fdt) + EXPAND_GRANULARITY;
buf = malloc(bufsize);
if(!buf)
fatal("malloc failed. can't relocate the device tree\n\r");
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 07ccaf89f3793bf53006c0f8e2a011671e47766f..cd1ffa44932779daa077f8cd229243f3ad8e2a3d 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1397,8 +1397,11 @@ CONFIG_USB_STORAGE=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
-CONFIG_RTC_LIB=m
-CONFIG_RTC_CLASS=m
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_HCTOSYS=y
+CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_DEBUG is not set
#
# RTC interfaces
@@ -1424,6 +1427,7 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
+CONFIG_RTC_DRV_RX8581=y
#
# SPI RTC drivers
diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig
index cfc94cfcf4cb3ec27803eac80aa669fddc686064..034a1fbdc8878c22892a9d62c47b845a50ea74be 100644
--- a/arch/powerpc/configs/ppc44x_defconfig
+++ b/arch/powerpc/configs/ppc44x_defconfig
@@ -267,7 +267,7 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
-CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
@@ -354,7 +354,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
+CONFIG_BRIDGE=m
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
@@ -579,7 +579,7 @@ CONFIG_NETDEVICES=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
+CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
# CONFIG_PHYLIB is not set
@@ -1001,11 +1001,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# see USB_STORAGE Help for more information
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1418,6 +1418,6 @@ CONFIG_CRYPTO_LZO=m
# CONFIG_PPC_CLOCK is not set
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=y
-CONFIG_KVM_BOOKE_HOST=y
+CONFIG_KVM_440=y
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
diff --git a/arch/powerpc/include/asm/atomic.h b/arch/powerpc/include/asm/atomic.h
index f3fc733758f5ccfeb27e1e3e51df7d4039608cbb..499be5bdd6fae52bd0f8894fa62e1553eb237912 100644
--- a/arch/powerpc/include/asm/atomic.h
+++ b/arch/powerpc/include/asm/atomic.h
@@ -111,7 +111,7 @@ static __inline__ void atomic_inc(atomic_t *v)
bne- 1b"
: "=&r" (t), "+m" (v->counter)
: "r" (&v->counter)
- : "cc");
+ : "cc", "xer");
}
static __inline__ int atomic_inc_return(atomic_t *v)
@@ -128,7 +128,7 @@ static __inline__ int atomic_inc_return(atomic_t *v)
ISYNC_ON_SMP
: "=&r" (t)
: "r" (&v->counter)
- : "cc", "memory");
+ : "cc", "xer", "memory");
return t;
}
@@ -155,7 +155,7 @@ static __inline__ void atomic_dec(atomic_t *v)
bne- 1b"
: "=&r" (t), "+m" (v->counter)
: "r" (&v->counter)
- : "cc");
+ : "cc", "xer");
}
static __inline__ int atomic_dec_return(atomic_t *v)
@@ -172,7 +172,7 @@ static __inline__ int atomic_dec_return(atomic_t *v)
ISYNC_ON_SMP
: "=&r" (t)
: "r" (&v->counter)
- : "cc", "memory");
+ : "cc", "xer", "memory");
return t;
}
@@ -346,7 +346,7 @@ static __inline__ void atomic64_inc(atomic64_t *v)
bne- 1b"
: "=&r" (t), "+m" (v->counter)
: "r" (&v->counter)
- : "cc");
+ : "cc", "xer");
}
static __inline__ long atomic64_inc_return(atomic64_t *v)
@@ -362,7 +362,7 @@ static __inline__ long atomic64_inc_return(atomic64_t *v)
ISYNC_ON_SMP
: "=&r" (t)
: "r" (&v->counter)
- : "cc", "memory");
+ : "cc", "xer", "memory");
return t;
}
@@ -388,7 +388,7 @@ static __inline__ void atomic64_dec(atomic64_t *v)
bne- 1b"
: "=&r" (t), "+m" (v->counter)
: "r" (&v->counter)
- : "cc");
+ : "cc", "xer");
}
static __inline__ long atomic64_dec_return(atomic64_t *v)
@@ -404,7 +404,7 @@ static __inline__ long atomic64_dec_return(atomic64_t *v)
ISYNC_ON_SMP
: "=&r" (t)
: "r" (&v->counter)
- : "cc", "memory");
+ : "cc", "xer", "memory");
return t;
}
@@ -431,7 +431,7 @@ static __inline__ long atomic64_dec_if_positive(atomic64_t *v)
"\n\
2:" : "=&r" (t)
: "r" (&v->counter)
- : "cc", "memory");
+ : "cc", "xer", "memory");
return t;
}
diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h
index e55d1f66b86fca4646f702355e15beaea10f6b65..64e1fdca233e065a0b3208517917a4e6103e6a21 100644
--- a/arch/powerpc/include/asm/bug.h
+++ b/arch/powerpc/include/asm/bug.h
@@ -3,6 +3,7 @@
#ifdef __KERNEL__
#include
+
/*
* Define an illegal instr to trap on the bug.
* We don't use 0 because that marks the end of a function
@@ -14,6 +15,7 @@
#ifdef CONFIG_BUG
#ifdef __ASSEMBLY__
+#include
#ifdef CONFIG_DEBUG_BUGVERBOSE
.macro EMIT_BUG_ENTRY addr,file,line,flags
.section __bug_table,"a"
@@ -26,7 +28,7 @@
.previous
.endm
#else
- .macro EMIT_BUG_ENTRY addr,file,line,flags
+.macro EMIT_BUG_ENTRY addr,file,line,flags
.section __bug_table,"a"
5001: PPC_LONG \addr
.short \flags
@@ -113,6 +115,13 @@
#define HAVE_ARCH_BUG_ON
#define HAVE_ARCH_WARN_ON
#endif /* __ASSEMBLY __ */
+#else
+#ifdef __ASSEMBLY__
+.macro EMIT_BUG_ENTRY addr,file,line,flags
+.endm
+#else /* !__ASSEMBLY__ */
+#define _EMIT_BUG_ENTRY
+#endif
#endif /* CONFIG_BUG */
#include
diff --git a/arch/powerpc/include/asm/byteorder.h b/arch/powerpc/include/asm/byteorder.h
index b37752214a16a7316756ab975ab4b1ef154f7529..d5de325472e9f4ae9aa3cbc06b66b4cb40978e0d 100644
--- a/arch/powerpc/include/asm/byteorder.h
+++ b/arch/powerpc/include/asm/byteorder.h
@@ -11,6 +11,8 @@
#include
#include
+#define __BIG_ENDIAN
+
#ifdef __GNUC__
#ifdef __KERNEL__
@@ -21,12 +23,19 @@ static __inline__ __u16 ld_le16(const volatile __u16 *addr)
__asm__ __volatile__ ("lhbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
return val;
}
+#define __arch_swab16p ld_le16
static __inline__ void st_le16(volatile __u16 *addr, const __u16 val)
{
__asm__ __volatile__ ("sthbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
}
+static inline void __arch_swab16s(__u16 *addr)
+{
+ st_le16(addr, *addr);
+}
+#define __arch_swab16s __arch_swab16s
+
static __inline__ __u32 ld_le32(const volatile __u32 *addr)
{
__u32 val;
@@ -34,13 +43,20 @@ static __inline__ __u32 ld_le32(const volatile __u32 *addr)
__asm__ __volatile__ ("lwbrx %0,0,%1" : "=r" (val) : "r" (addr), "m" (*addr));
return val;
}
+#define __arch_swab32p ld_le32
static __inline__ void st_le32(volatile __u32 *addr, const __u32 val)
{
__asm__ __volatile__ ("stwbrx %1,0,%2" : "=m" (*addr) : "r" (val), "r" (addr));
}
-static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value)
+static inline void __arch_swab32s(__u32 *addr)
+{
+ st_le32(addr, *addr);
+}
+#define __arch_swab32s __arch_swab32s
+
+static inline __attribute_const__ __u16 __arch_swab16(__u16 value)
{
__u16 result;
@@ -49,8 +65,9 @@ static __inline__ __attribute_const__ __u16 ___arch__swab16(__u16 value)
: "r" (value), "0" (value >> 8));
return result;
}
+#define __arch_swab16 __arch_swab16
-static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value)
+static inline __attribute_const__ __u32 __arch_swab32(__u32 value)
{
__u32 result;
@@ -61,29 +78,16 @@ static __inline__ __attribute_const__ __u32 ___arch__swab32(__u32 value)
: "r" (value), "0" (value >> 24));
return result;
}
-
-#define __arch__swab16(x) ___arch__swab16(x)
-#define __arch__swab32(x) ___arch__swab32(x)
-
-/* The same, but returns converted value from the location pointer by addr. */
-#define __arch__swab16p(addr) ld_le16(addr)
-#define __arch__swab32p(addr) ld_le32(addr)
-
-/* The same, but do the conversion in situ, ie. put the value back to addr. */
-#define __arch__swab16s(addr) st_le16(addr,*addr)
-#define __arch__swab32s(addr) st_le32(addr,*addr)
+#define __arch_swab32 __arch_swab32
#endif /* __KERNEL__ */
-#ifndef __STRICT_ANSI__
-#define __BYTEORDER_HAS_U64__
#ifndef __powerpc64__
#define __SWAB_64_THRU_32__
#endif /* __powerpc64__ */
-#endif /* __STRICT_ANSI__ */
#endif /* __GNUC__ */
-#include
+#include
#endif /* _ASM_POWERPC_BYTEORDER_H */
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 1e94b07a020ed6907be0fd1d35a2ec58b4d5b852..4911104791c319b0a6731676c4db599b5530aab9 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -82,6 +82,7 @@ struct cpu_spec {
char *cpu_name;
unsigned long cpu_features; /* Kernel features */
unsigned int cpu_user_features; /* Userland features */
+ unsigned int mmu_features; /* MMU features */
/* cache line sizes */
unsigned int icache_bsize;
@@ -144,17 +145,14 @@ extern const char *powerpc_base_platform;
#define CPU_FTR_USE_TB ASM_CONST(0x0000000000000040)
#define CPU_FTR_L2CSR ASM_CONST(0x0000000000000080)
#define CPU_FTR_601 ASM_CONST(0x0000000000000100)
-#define CPU_FTR_HPTE_TABLE ASM_CONST(0x0000000000000200)
#define CPU_FTR_CAN_NAP ASM_CONST(0x0000000000000400)
#define CPU_FTR_L3CR ASM_CONST(0x0000000000000800)
#define CPU_FTR_L3_DISABLE_NAP ASM_CONST(0x0000000000001000)
#define CPU_FTR_NAP_DISABLE_L2_PR ASM_CONST(0x0000000000002000)
#define CPU_FTR_DUAL_PLL_750FX ASM_CONST(0x0000000000004000)
#define CPU_FTR_NO_DPM ASM_CONST(0x0000000000008000)
-#define CPU_FTR_HAS_HIGH_BATS ASM_CONST(0x0000000000010000)
#define CPU_FTR_NEED_COHERENT ASM_CONST(0x0000000000020000)
#define CPU_FTR_NO_BTIC ASM_CONST(0x0000000000040000)
-#define CPU_FTR_BIG_PHYS ASM_CONST(0x0000000000080000)
#define CPU_FTR_NODSISRALIGN ASM_CONST(0x0000000000100000)
#define CPU_FTR_PPC_LE ASM_CONST(0x0000000000200000)
#define CPU_FTR_REAL_LE ASM_CONST(0x0000000000400000)
@@ -163,6 +161,8 @@ extern const char *powerpc_base_platform;
#define CPU_FTR_SPE ASM_CONST(0x0000000002000000)
#define CPU_FTR_NEED_PAIRED_STWCX ASM_CONST(0x0000000004000000)
#define CPU_FTR_LWSYNC ASM_CONST(0x0000000008000000)
+#define CPU_FTR_NOEXECUTE ASM_CONST(0x0000000010000000)
+#define CPU_FTR_INDEXED_DCR ASM_CONST(0x0000000020000000)
/*
* Add the 64-bit processor unique features in the top half of the word;
@@ -177,7 +177,6 @@ extern const char *powerpc_base_platform;
#define CPU_FTR_SLB LONG_ASM_CONST(0x0000000100000000)
#define CPU_FTR_16M_PAGE LONG_ASM_CONST(0x0000000200000000)
#define CPU_FTR_TLBIEL LONG_ASM_CONST(0x0000000400000000)
-#define CPU_FTR_NOEXECUTE LONG_ASM_CONST(0x0000000800000000)
#define CPU_FTR_IABR LONG_ASM_CONST(0x0000002000000000)
#define CPU_FTR_MMCRA LONG_ASM_CONST(0x0000004000000000)
#define CPU_FTR_CTRL LONG_ASM_CONST(0x0000008000000000)
@@ -194,6 +193,7 @@ extern const char *powerpc_base_platform;
#define CPU_FTR_VSX LONG_ASM_CONST(0x0010000000000000)
#define CPU_FTR_SAO LONG_ASM_CONST(0x0020000000000000)
#define CPU_FTR_CP_USE_DCBTZ LONG_ASM_CONST(0x0040000000000000)
+#define CPU_FTR_UNALIGNED_LD_STD LONG_ASM_CONST(0x0080000000000000)
#ifndef __ASSEMBLY__
@@ -264,164 +264,159 @@ extern const char *powerpc_base_platform;
!defined(CONFIG_POWER3) && !defined(CONFIG_POWER4) && \
!defined(CONFIG_BOOKE))
-#define CPU_FTRS_PPC601 (CPU_FTR_COMMON | CPU_FTR_601 | CPU_FTR_HPTE_TABLE | \
+#define CPU_FTRS_PPC601 (CPU_FTR_COMMON | CPU_FTR_601 | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_UNIFIED_ID_CACHE)
#define CPU_FTRS_603 (CPU_FTR_COMMON | \
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
#define CPU_FTRS_604 (CPU_FTR_COMMON | \
- CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE | CPU_FTR_PPC_LE)
+ CPU_FTR_USE_TB | CPU_FTR_PPC_LE)
#define CPU_FTRS_740_NOTAU (CPU_FTR_COMMON | \
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
- CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
#define CPU_FTRS_740 (CPU_FTR_COMMON | \
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
- CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
+ CPU_FTR_TAU | CPU_FTR_MAYBE_CAN_NAP | \
CPU_FTR_PPC_LE)
#define CPU_FTRS_750 (CPU_FTR_COMMON | \
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
- CPU_FTR_TAU | CPU_FTR_HPTE_TABLE | CPU_FTR_MAYBE_CAN_NAP | \
+ CPU_FTR_TAU | CPU_FTR_MAYBE_CAN_NAP | \
CPU_FTR_PPC_LE)
-#define CPU_FTRS_750CL (CPU_FTRS_750 | CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_750CL (CPU_FTRS_750)
#define CPU_FTRS_750FX1 (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | CPU_FTR_NO_DPM)
#define CPU_FTRS_750FX2 (CPU_FTRS_750 | CPU_FTR_NO_DPM)
-#define CPU_FTRS_750FX (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX | \
- CPU_FTR_HAS_HIGH_BATS)
+#define CPU_FTRS_750FX (CPU_FTRS_750 | CPU_FTR_DUAL_PLL_750FX)
#define CPU_FTRS_750GX (CPU_FTRS_750FX)
#define CPU_FTRS_7400_NOTAU (CPU_FTR_COMMON | \
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
- CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
+ CPU_FTR_ALTIVEC_COMP | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
#define CPU_FTRS_7400 (CPU_FTR_COMMON | \
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | CPU_FTR_L2CR | \
- CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | CPU_FTR_HPTE_TABLE | \
+ CPU_FTR_TAU | CPU_FTR_ALTIVEC_COMP | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_PPC_LE)
#define CPU_FTRS_7450_20 (CPU_FTR_COMMON | \
CPU_FTR_USE_TB | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
- CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+ CPU_FTR_L3CR | CPU_FTR_SPEC7450 | \
CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
#define CPU_FTRS_7450_21 (CPU_FTR_COMMON | \
CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
- CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+ CPU_FTR_L3CR | CPU_FTR_SPEC7450 | \
CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
#define CPU_FTRS_7450_23 (CPU_FTR_COMMON | \
CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
- CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+ CPU_FTR_L3CR | CPU_FTR_SPEC7450 | \
CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
#define CPU_FTRS_7455_1 (CPU_FTR_COMMON | \
CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | CPU_FTR_L3CR | \
- CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | CPU_FTR_HAS_HIGH_BATS | \
- CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
+ CPU_FTR_SPEC7450 | CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
#define CPU_FTRS_7455_20 (CPU_FTR_COMMON | \
CPU_FTR_USE_TB | CPU_FTR_NEED_PAIRED_STWCX | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
- CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
+ CPU_FTR_L3CR | CPU_FTR_SPEC7450 | \
CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_L3_DISABLE_NAP | \
- CPU_FTR_NEED_COHERENT | CPU_FTR_HAS_HIGH_BATS | CPU_FTR_PPC_LE)
+ CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE)
#define CPU_FTRS_7455 (CPU_FTR_COMMON | \
CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
- CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
- CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_L3CR | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR | \
CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
#define CPU_FTRS_7447_10 (CPU_FTR_COMMON | \
CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
- CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
- CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_L3CR | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR | \
CPU_FTR_NEED_COHERENT | CPU_FTR_NO_BTIC | CPU_FTR_PPC_LE | \
CPU_FTR_NEED_PAIRED_STWCX)
#define CPU_FTRS_7447 (CPU_FTR_COMMON | \
CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
- CPU_FTR_L3CR | CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
- CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_L3CR | CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR | \
CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
#define CPU_FTRS_7447A (CPU_FTR_COMMON | \
CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
- CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
- CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR | \
CPU_FTR_NEED_COHERENT | CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
#define CPU_FTRS_7448 (CPU_FTR_COMMON | \
CPU_FTR_USE_TB | \
CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_L2CR | CPU_FTR_ALTIVEC_COMP | \
- CPU_FTR_HPTE_TABLE | CPU_FTR_SPEC7450 | \
- CPU_FTR_NAP_DISABLE_L2_PR | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_SPEC7450 | CPU_FTR_NAP_DISABLE_L2_PR | \
CPU_FTR_PPC_LE | CPU_FTR_NEED_PAIRED_STWCX)
#define CPU_FTRS_82XX (CPU_FTR_COMMON | \
CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB)
#define CPU_FTRS_G2_LE (CPU_FTR_COMMON | CPU_FTR_MAYBE_CAN_DOZE | \
- CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS)
+ CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP)
#define CPU_FTRS_E300 (CPU_FTR_MAYBE_CAN_DOZE | \
- CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | \
CPU_FTR_COMMON)
#define CPU_FTRS_E300C2 (CPU_FTR_MAYBE_CAN_DOZE | \
- CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_HAS_HIGH_BATS | \
+ CPU_FTR_USE_TB | CPU_FTR_MAYBE_CAN_NAP | \
CPU_FTR_COMMON | CPU_FTR_FPU_UNAVAILABLE)
-#define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | \
- CPU_FTR_USE_TB | CPU_FTR_HPTE_TABLE)
+#define CPU_FTRS_CLASSIC32 (CPU_FTR_COMMON | CPU_FTR_USE_TB)
#define CPU_FTRS_8XX (CPU_FTR_USE_TB)
-#define CPU_FTRS_40X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
-#define CPU_FTRS_44X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN)
+#define CPU_FTRS_40X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
+#define CPU_FTRS_44X (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
+#define CPU_FTRS_440x6 (CPU_FTR_USE_TB | CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE | \
+ CPU_FTR_INDEXED_DCR)
#define CPU_FTRS_E200 (CPU_FTR_USE_TB | CPU_FTR_SPE_COMP | \
CPU_FTR_NODSISRALIGN | CPU_FTR_COHERENT_ICACHE | \
- CPU_FTR_UNIFIED_ID_CACHE)
+ CPU_FTR_UNIFIED_ID_CACHE | CPU_FTR_NOEXECUTE)
#define CPU_FTRS_E500 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
- CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN)
+ CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN | \
+ CPU_FTR_NOEXECUTE)
#define CPU_FTRS_E500_2 (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
- CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | \
- CPU_FTR_NODSISRALIGN)
+ CPU_FTR_SPE_COMP | CPU_FTR_MAYBE_CAN_NAP | \
+ CPU_FTR_NODSISRALIGN | CPU_FTR_NOEXECUTE)
#define CPU_FTRS_E500MC (CPU_FTR_MAYBE_CAN_DOZE | CPU_FTR_USE_TB | \
- CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_BIG_PHYS | CPU_FTR_NODSISRALIGN | \
- CPU_FTR_L2CSR | CPU_FTR_LWSYNC)
+ CPU_FTR_MAYBE_CAN_NAP | CPU_FTR_NODSISRALIGN | \
+ CPU_FTR_L2CSR | CPU_FTR_LWSYNC | CPU_FTR_NOEXECUTE)
#define CPU_FTRS_GENERIC_32 (CPU_FTR_COMMON | CPU_FTR_NODSISRALIGN)
/* 64-bit CPUs */
#define CPU_FTRS_POWER3 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
- CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | CPU_FTR_PPC_LE)
+ CPU_FTR_IABR | CPU_FTR_PPC_LE)
#define CPU_FTRS_RS64 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
- CPU_FTR_HPTE_TABLE | CPU_FTR_IABR | \
+ CPU_FTR_IABR | \
CPU_FTR_MMCRA | CPU_FTR_CTRL)
#define CPU_FTRS_POWER4 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
- CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_CP_USE_DCBTZ)
#define CPU_FTRS_PPC970 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
- CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_CAN_NAP | CPU_FTR_MMCRA | \
CPU_FTR_CP_USE_DCBTZ)
#define CPU_FTRS_POWER5 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
- CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
CPU_FTR_PURR)
#define CPU_FTRS_POWER6 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
- CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
- CPU_FTR_DSCR)
+ CPU_FTR_DSCR | CPU_FTR_UNALIGNED_LD_STD)
#define CPU_FTRS_POWER7 (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
- CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_COHERENT_ICACHE | CPU_FTR_LOCKLESS_TLBIE | \
CPU_FTR_PURR | CPU_FTR_SPURR | CPU_FTR_REAL_LE | \
CPU_FTR_DSCR | CPU_FTR_SAO)
#define CPU_FTRS_CELL (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
- CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
+ CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
CPU_FTR_PAUSE_ZERO | CPU_FTR_CI_LARGE_PAGE | \
- CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ)
+ CPU_FTR_CELL_TB_BUG | CPU_FTR_CP_USE_DCBTZ | \
+ CPU_FTR_UNALIGNED_LD_STD)
#define CPU_FTRS_PA6T (CPU_FTR_USE_TB | CPU_FTR_LWSYNC | \
- CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2 | \
+ CPU_FTR_PPCAS_ARCH_V2 | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_CI_LARGE_PAGE | \
CPU_FTR_PURR | CPU_FTR_REAL_LE | CPU_FTR_NO_SLBIE_B)
-#define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | \
- CPU_FTR_HPTE_TABLE | CPU_FTR_PPCAS_ARCH_V2)
+#define CPU_FTRS_COMPATIBLE (CPU_FTR_USE_TB | CPU_FTR_PPCAS_ARCH_V2)
#ifdef __powerpc64__
#define CPU_FTRS_POSSIBLE \
@@ -452,7 +447,7 @@ enum {
CPU_FTRS_40X |
#endif
#ifdef CONFIG_44x
- CPU_FTRS_44X |
+ CPU_FTRS_44X | CPU_FTRS_440x6 |
#endif
#ifdef CONFIG_E200
CPU_FTRS_E200 |
@@ -492,7 +487,7 @@ enum {
CPU_FTRS_40X &
#endif
#ifdef CONFIG_44x
- CPU_FTRS_44X &
+ CPU_FTRS_44X & CPU_FTRS_440x6 &
#endif
#ifdef CONFIG_E200
CPU_FTRS_E200 &
diff --git a/arch/powerpc/include/asm/dcr-native.h b/arch/powerpc/include/asm/dcr-native.h
index 72d2b72c739007c447f25272bc0f30515cd08f76..7d2e6235726d14a94190436891ca157c2457d0c1 100644
--- a/arch/powerpc/include/asm/dcr-native.h
+++ b/arch/powerpc/include/asm/dcr-native.h
@@ -23,6 +23,7 @@
#ifndef __ASSEMBLY__
#include
+#include
typedef struct {
unsigned int base;
@@ -39,23 +40,45 @@ static inline bool dcr_map_ok_native(dcr_host_native_t host)
#define dcr_read_native(host, dcr_n) mfdcr(dcr_n + host.base)
#define dcr_write_native(host, dcr_n, value) mtdcr(dcr_n + host.base, value)
-/* Device Control Registers */
-void __mtdcr(int reg, unsigned int val);
-unsigned int __mfdcr(int reg);
+/* Table based DCR accessors */
+extern void __mtdcr(unsigned int reg, unsigned int val);
+extern unsigned int __mfdcr(unsigned int reg);
+
+/* mfdcrx/mtdcrx instruction based accessors. We hand code
+ * the opcodes in order not to depend on newer binutils
+ */
+static inline unsigned int mfdcrx(unsigned int reg)
+{
+ unsigned int ret;
+ asm volatile(".long 0x7c000206 | (%0 << 21) | (%1 << 16)"
+ : "=r" (ret) : "r" (reg));
+ return ret;
+}
+
+static inline void mtdcrx(unsigned int reg, unsigned int val)
+{
+ asm volatile(".long 0x7c000306 | (%0 << 21) | (%1 << 16)"
+ : : "r" (val), "r" (reg));
+}
+
#define mfdcr(rn) \
({unsigned int rval; \
- if (__builtin_constant_p(rn)) \
+ if (__builtin_constant_p(rn) && rn < 1024) \
asm volatile("mfdcr %0," __stringify(rn) \
: "=r" (rval)); \
+ else if (likely(cpu_has_feature(CPU_FTR_INDEXED_DCR))) \
+ rval = mfdcrx(rn); \
else \
rval = __mfdcr(rn); \
rval;})
#define mtdcr(rn, v) \
do { \
- if (__builtin_constant_p(rn)) \
+ if (__builtin_constant_p(rn) && rn < 1024) \
asm volatile("mtdcr " __stringify(rn) ",%0" \
: : "r" (v)); \
+ else if (likely(cpu_has_feature(CPU_FTR_INDEXED_DCR))) \
+ mtdcrx(rn, v); \
else \
__mtdcr(rn, v); \
} while (0)
@@ -69,8 +92,13 @@ static inline unsigned __mfdcri(int base_addr, int base_data, int reg)
unsigned int val;
spin_lock_irqsave(&dcr_ind_lock, flags);
- __mtdcr(base_addr, reg);
- val = __mfdcr(base_data);
+ if (cpu_has_feature(CPU_FTR_INDEXED_DCR)) {
+ mtdcrx(base_addr, reg);
+ val = mfdcrx(base_data);
+ } else {
+ __mtdcr(base_addr, reg);
+ val = __mfdcr(base_data);
+ }
spin_unlock_irqrestore(&dcr_ind_lock, flags);
return val;
}
@@ -81,8 +109,13 @@ static inline void __mtdcri(int base_addr, int base_data, int reg,
unsigned long flags;
spin_lock_irqsave(&dcr_ind_lock, flags);
- __mtdcr(base_addr, reg);
- __mtdcr(base_data, val);
+ if (cpu_has_feature(CPU_FTR_INDEXED_DCR)) {
+ mtdcrx(base_addr, reg);
+ mtdcrx(base_data, val);
+ } else {
+ __mtdcr(base_addr, reg);
+ __mtdcr(base_data, val);
+ }
spin_unlock_irqrestore(&dcr_ind_lock, flags);
}
@@ -93,9 +126,15 @@ static inline void __dcri_clrset(int base_addr, int base_data, int reg,
unsigned int val;
spin_lock_irqsave(&dcr_ind_lock, flags);
- __mtdcr(base_addr, reg);
- val = (__mfdcr(base_data) & ~clr) | set;
- __mtdcr(base_data, val);
+ if (cpu_has_feature(CPU_FTR_INDEXED_DCR)) {
+ mtdcrx(base_addr, reg);
+ val = (mfdcrx(base_data) & ~clr) | set;
+ mtdcrx(base_data, val);
+ } else {
+ __mtdcr(base_addr, reg);
+ val = (__mfdcr(base_data) & ~clr) | set;
+ __mtdcr(base_data, val);
+ }
spin_unlock_irqrestore(&dcr_ind_lock, flags);
}
diff --git a/arch/powerpc/include/asm/dcr.h b/arch/powerpc/include/asm/dcr.h
index d13fb68bb5c0e3daf5a965635b548f18bc00a648..9d6851cfb84149ee0d042acb7b17408c77ab080a 100644
--- a/arch/powerpc/include/asm/dcr.h
+++ b/arch/powerpc/include/asm/dcr.h
@@ -68,9 +68,9 @@ typedef dcr_host_mmio_t dcr_host_t;
* additional helpers to read the DCR * base from the device-tree
*/
struct device_node;
-extern unsigned int dcr_resource_start(struct device_node *np,
+extern unsigned int dcr_resource_start(const struct device_node *np,
unsigned int index);
-extern unsigned int dcr_resource_len(struct device_node *np,
+extern unsigned int dcr_resource_len(const struct device_node *np,
unsigned int index);
#endif /* CONFIG_PPC_DCR */
#endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/device.h b/arch/powerpc/include/asm/device.h
index dfd504caccc1c711216adc077b351eb5710f32ca..7d2277cef09a8502b22bdea95185f132a479f7db 100644
--- a/arch/powerpc/include/asm/device.h
+++ b/arch/powerpc/include/asm/device.h
@@ -18,4 +18,16 @@ struct dev_archdata {
void *dma_data;
};
+static inline void dev_archdata_set_node(struct dev_archdata *ad,
+ struct device_node *np)
+{
+ ad->of_node = np;
+}
+
+static inline struct device_node *
+dev_archdata_get_node(const struct dev_archdata *ad)
+{
+ return ad->of_node;
+}
+
#endif /* _ASM_POWERPC_DEVICE_H */
diff --git a/arch/powerpc/include/asm/dma-mapping.h b/arch/powerpc/include/asm/dma-mapping.h
index fddb229bd74f270231c570726d7e15bef0a201f5..86cef7ddc8d5f251b07c6c838bf7dcba9d8d579d 100644
--- a/arch/powerpc/include/asm/dma-mapping.h
+++ b/arch/powerpc/include/asm/dma-mapping.h
@@ -60,12 +60,6 @@ struct dma_mapping_ops {
dma_addr_t *dma_handle, gfp_t flag);
void (*free_coherent)(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle);
- dma_addr_t (*map_single)(struct device *dev, void *ptr,
- size_t size, enum dma_data_direction direction,
- struct dma_attrs *attrs);
- void (*unmap_single)(struct device *dev, dma_addr_t dma_addr,
- size_t size, enum dma_data_direction direction,
- struct dma_attrs *attrs);
int (*map_sg)(struct device *dev, struct scatterlist *sg,
int nents, enum dma_data_direction direction,
struct dma_attrs *attrs);
@@ -82,6 +76,22 @@ struct dma_mapping_ops {
dma_addr_t dma_address, size_t size,
enum dma_data_direction direction,
struct dma_attrs *attrs);
+#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
+ void (*sync_single_range_for_cpu)(struct device *hwdev,
+ dma_addr_t dma_handle, unsigned long offset,
+ size_t size,
+ enum dma_data_direction direction);
+ void (*sync_single_range_for_device)(struct device *hwdev,
+ dma_addr_t dma_handle, unsigned long offset,
+ size_t size,
+ enum dma_data_direction direction);
+ void (*sync_sg_for_cpu)(struct device *hwdev,
+ struct scatterlist *sg, int nelems,
+ enum dma_data_direction direction);
+ void (*sync_sg_for_device)(struct device *hwdev,
+ struct scatterlist *sg, int nelems,
+ enum dma_data_direction direction);
+#endif
};
/*
@@ -149,10 +159,9 @@ static inline int dma_set_mask(struct device *dev, u64 dma_mask)
}
/*
- * TODO: map_/unmap_single will ideally go away, to be completely
- * replaced by map/unmap_page. Until then, we allow dma_ops to have
- * one or the other, or both by checking to see if the specific
- * function requested exists; and if not, falling back on the other set.
+ * map_/unmap_single actually call through to map/unmap_page now that all the
+ * dma_mapping_ops have been converted over. We just have to get the page and
+ * offset to pass through to map_page
*/
static inline dma_addr_t dma_map_single_attrs(struct device *dev,
void *cpu_addr,
@@ -164,10 +173,6 @@ static inline dma_addr_t dma_map_single_attrs(struct device *dev,
BUG_ON(!dma_ops);
- if (dma_ops->map_single)
- return dma_ops->map_single(dev, cpu_addr, size, direction,
- attrs);
-
return dma_ops->map_page(dev, virt_to_page(cpu_addr),
(unsigned long)cpu_addr % PAGE_SIZE, size,
direction, attrs);
@@ -183,11 +188,6 @@ static inline void dma_unmap_single_attrs(struct device *dev,
BUG_ON(!dma_ops);
- if (dma_ops->unmap_single) {
- dma_ops->unmap_single(dev, dma_addr, size, direction, attrs);
- return;
- }
-
dma_ops->unmap_page(dev, dma_addr, size, direction, attrs);
}
@@ -201,12 +201,7 @@ static inline dma_addr_t dma_map_page_attrs(struct device *dev,
BUG_ON(!dma_ops);
- if (dma_ops->map_page)
- return dma_ops->map_page(dev, page, offset, size, direction,
- attrs);
-
- return dma_ops->map_single(dev, page_address(page) + offset, size,
- direction, attrs);
+ return dma_ops->map_page(dev, page, offset, size, direction, attrs);
}
static inline void dma_unmap_page_attrs(struct device *dev,
@@ -219,12 +214,7 @@ static inline void dma_unmap_page_attrs(struct device *dev,
BUG_ON(!dma_ops);
- if (dma_ops->unmap_page) {
- dma_ops->unmap_page(dev, dma_address, size, direction, attrs);
- return;
- }
-
- dma_ops->unmap_single(dev, dma_address, size, direction, attrs);
+ dma_ops->unmap_page(dev, dma_address, size, direction, attrs);
}
static inline int dma_map_sg_attrs(struct device *dev, struct scatterlist *sg,
@@ -308,47 +298,107 @@ static inline void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
dma_unmap_sg_attrs(dev, sg, nhwentries, direction, NULL);
}
+#ifdef CONFIG_PPC_NEED_DMA_SYNC_OPS
static inline void dma_sync_single_for_cpu(struct device *dev,
dma_addr_t dma_handle, size_t size,
enum dma_data_direction direction)
{
- BUG_ON(direction == DMA_NONE);
- __dma_sync(bus_to_virt(dma_handle), size, direction);
+ struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+ BUG_ON(!dma_ops);
+ dma_ops->sync_single_range_for_cpu(dev, dma_handle, 0,
+ size, direction);
}
static inline void dma_sync_single_for_device(struct device *dev,
dma_addr_t dma_handle, size_t size,
enum dma_data_direction direction)
{
- BUG_ON(direction == DMA_NONE);
- __dma_sync(bus_to_virt(dma_handle), size, direction);
+ struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+ BUG_ON(!dma_ops);
+ dma_ops->sync_single_range_for_device(dev, dma_handle,
+ 0, size, direction);
}
static inline void dma_sync_sg_for_cpu(struct device *dev,
struct scatterlist *sgl, int nents,
enum dma_data_direction direction)
{
- struct scatterlist *sg;
- int i;
+ struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
- BUG_ON(direction == DMA_NONE);
+ BUG_ON(!dma_ops);
+ dma_ops->sync_sg_for_cpu(dev, sgl, nents, direction);
+}
+
+static inline void dma_sync_sg_for_device(struct device *dev,
+ struct scatterlist *sgl, int nents,
+ enum dma_data_direction direction)
+{
+ struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+ BUG_ON(!dma_ops);
+ dma_ops->sync_sg_for_device(dev, sgl, nents, direction);
+}
+
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+ dma_addr_t dma_handle, unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
- for_each_sg(sgl, sg, nents, i)
- __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+ BUG_ON(!dma_ops);
+ dma_ops->sync_single_range_for_cpu(dev, dma_handle,
+ offset, size, direction);
+}
+
+static inline void dma_sync_single_range_for_device(struct device *dev,
+ dma_addr_t dma_handle, unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ struct dma_mapping_ops *dma_ops = get_dma_ops(dev);
+
+ BUG_ON(!dma_ops);
+ dma_ops->sync_single_range_for_device(dev, dma_handle, offset,
+ size, direction);
+}
+#else /* CONFIG_PPC_NEED_DMA_SYNC_OPS */
+static inline void dma_sync_single_for_cpu(struct device *dev,
+ dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction direction)
+{
+}
+
+static inline void dma_sync_single_for_device(struct device *dev,
+ dma_addr_t dma_handle, size_t size,
+ enum dma_data_direction direction)
+{
+}
+
+static inline void dma_sync_sg_for_cpu(struct device *dev,
+ struct scatterlist *sgl, int nents,
+ enum dma_data_direction direction)
+{
}
static inline void dma_sync_sg_for_device(struct device *dev,
struct scatterlist *sgl, int nents,
enum dma_data_direction direction)
{
- struct scatterlist *sg;
- int i;
+}
- BUG_ON(direction == DMA_NONE);
+static inline void dma_sync_single_range_for_cpu(struct device *dev,
+ dma_addr_t dma_handle, unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+}
- for_each_sg(sgl, sg, nents, i)
- __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+static inline void dma_sync_single_range_for_device(struct device *dev,
+ dma_addr_t dma_handle, unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
}
+#endif
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
@@ -382,22 +432,6 @@ static inline int dma_get_cache_alignment(void)
#endif
}
-static inline void dma_sync_single_range_for_cpu(struct device *dev,
- dma_addr_t dma_handle, unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- /* just sync everything for now */
- dma_sync_single_for_cpu(dev, dma_handle, offset + size, direction);
-}
-
-static inline void dma_sync_single_range_for_device(struct device *dev,
- dma_addr_t dma_handle, unsigned long offset, size_t size,
- enum dma_data_direction direction)
-{
- /* just sync everything for now */
- dma_sync_single_for_device(dev, dma_handle, offset + size, direction);
-}
-
static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
{
diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h
index b886bec67016795582d1922b3ccc2c0913c8f878..66ea9b8b95c58f44c2ca464758d754f5378ac2ca 100644
--- a/arch/powerpc/include/asm/eeh.h
+++ b/arch/powerpc/include/asm/eeh.h
@@ -17,8 +17,8 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-#ifndef _PPC64_EEH_H
-#define _PPC64_EEH_H
+#ifndef _POWERPC_EEH_H
+#define _POWERPC_EEH_H
#ifdef __KERNEL__
#include
@@ -110,6 +110,7 @@ static inline void eeh_remove_bus_device(struct pci_dev *dev) { }
#define EEH_IO_ERROR_VALUE(size) (-1UL)
#endif /* CONFIG_EEH */
+#ifdef CONFIG_PPC64
/*
* MMIO read/write operations with EEH support.
*/
@@ -207,5 +208,6 @@ static inline void eeh_readsl(const volatile void __iomem *addr, void * buf,
eeh_check_failure(addr, *(u32*)buf);
}
+#endif /* CONFIG_PPC64 */
#endif /* __KERNEL__ */
-#endif /* _PPC64_EEH_H */
+#endif /* _POWERPC_EEH_H */
diff --git a/arch/powerpc/include/asm/elf.h b/arch/powerpc/include/asm/elf.h
index d812929390e45e602b0a2e02506c7e4e4ac1474c..cd46f023ec6d298dd4571249881ed54a12649eb0 100644
--- a/arch/powerpc/include/asm/elf.h
+++ b/arch/powerpc/include/asm/elf.h
@@ -267,7 +267,7 @@ extern int ucache_bsize;
#define ARCH_HAS_SETUP_ADDITIONAL_PAGES
struct linux_binprm;
extern int arch_setup_additional_pages(struct linux_binprm *bprm,
- int executable_stack);
+ int uses_interp);
#define VDSO_AUX_ENT(a,b) NEW_AUX_ENT(a,b);
#endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
index a1029967620be29003550a84fd12d3e78a13c4b7..e4094a5cb05b6f7de223dd6c15eaf888289d5240 100644
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -81,6 +81,36 @@ label##5: \
#define ALT_FTR_SECTION_END_IFCLR(msk) \
ALT_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
+/* MMU feature dependent sections */
+#define BEGIN_MMU_FTR_SECTION_NESTED(label) START_FTR_SECTION(label)
+#define BEGIN_MMU_FTR_SECTION START_FTR_SECTION(97)
+
+#define END_MMU_FTR_SECTION_NESTED(msk, val, label) \
+ FTR_SECTION_ELSE_NESTED(label) \
+ MAKE_FTR_SECTION_ENTRY(msk, val, label, __mmu_ftr_fixup)
+
+#define END_MMU_FTR_SECTION(msk, val) \
+ END_MMU_FTR_SECTION_NESTED(msk, val, 97)
+
+#define END_MMU_FTR_SECTION_IFSET(msk) END_MMU_FTR_SECTION((msk), (msk))
+#define END_MMU_FTR_SECTION_IFCLR(msk) END_MMU_FTR_SECTION((msk), 0)
+
+/* MMU feature sections with alternatives, use BEGIN_FTR_SECTION to start */
+#define MMU_FTR_SECTION_ELSE_NESTED(label) FTR_SECTION_ELSE_NESTED(label)
+#define MMU_FTR_SECTION_ELSE MMU_FTR_SECTION_ELSE_NESTED(97)
+#define ALT_MMU_FTR_SECTION_END_NESTED(msk, val, label) \
+ MAKE_FTR_SECTION_ENTRY(msk, val, label, __mmu_ftr_fixup)
+#define ALT_MMU_FTR_SECTION_END_NESTED_IFSET(msk, label) \
+ ALT_MMU_FTR_SECTION_END_NESTED(msk, msk, label)
+#define ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(msk, label) \
+ ALT_MMU_FTR_SECTION_END_NESTED(msk, 0, label)
+#define ALT_MMU_FTR_SECTION_END(msk, val) \
+ ALT_MMU_FTR_SECTION_END_NESTED(msk, val, 97)
+#define ALT_MMU_FTR_SECTION_END_IFSET(msk) \
+ ALT_MMU_FTR_SECTION_END_NESTED_IFSET(msk, 97)
+#define ALT_MMU_FTR_SECTION_END_IFCLR(msk) \
+ ALT_MMU_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
+
/* Firmware feature dependent sections */
#define BEGIN_FW_FTR_SECTION_NESTED(label) START_FTR_SECTION(label)
#define BEGIN_FW_FTR_SECTION START_FTR_SECTION(97)
diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h
index b298f7a631e6cd9620094c72da4c82832afcdb43..e5f2ae8362f7ea8e15fcaca975fefa6e3662010b 100644
--- a/arch/powerpc/include/asm/ftrace.h
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -7,7 +7,19 @@
#ifndef __ASSEMBLY__
extern void _mcount(void);
-#endif
+
+#ifdef CONFIG_DYNAMIC_FTRACE
+static inline unsigned long ftrace_call_adjust(unsigned long addr)
+{
+ /* reloction of mcount call site is the same as the address */
+ return addr;
+}
+
+struct dyn_arch_ftrace {
+ struct module *mod;
+};
+#endif /* CONFIG_DYNAMIC_FTRACE */
+#endif /* __ASSEMBLY__ */
#endif
diff --git a/arch/powerpc/include/asm/highmem.h b/arch/powerpc/include/asm/highmem.h
index 91c589520c0aa65256f954c0fce003e37a527b5d..04e4a620952eaefead81d476e95e03fb9dab9e3e 100644
--- a/arch/powerpc/include/asm/highmem.h
+++ b/arch/powerpc/include/asm/highmem.h
@@ -38,9 +38,24 @@ extern pte_t *pkmap_page_table;
* easily, subsequent pte tables have to be allocated in one physical
* chunk of RAM.
*/
-#define LAST_PKMAP (1 << PTE_SHIFT)
-#define LAST_PKMAP_MASK (LAST_PKMAP-1)
+/*
+ * We use one full pte table with 4K pages. And with 16K/64K pages pte
+ * table covers enough memory (32MB and 512MB resp.) that both FIXMAP
+ * and PKMAP can be placed in single pte table. We use 1024 pages for
+ * PKMAP in case of 16K/64K pages.
+ */
+#ifdef CONFIG_PPC_4K_PAGES
+#define PKMAP_ORDER PTE_SHIFT
+#else
+#define PKMAP_ORDER 10
+#endif
+#define LAST_PKMAP (1 << PKMAP_ORDER)
+#ifndef CONFIG_PPC_4K_PAGES
+#define PKMAP_BASE (FIXADDR_START - PAGE_SIZE*(LAST_PKMAP + 1))
+#else
#define PKMAP_BASE ((FIXADDR_START - PAGE_SIZE*(LAST_PKMAP + 1)) & PMD_MASK)
+#endif
+#define LAST_PKMAP_MASK (LAST_PKMAP-1)
#define PKMAP_NR(virt) ((virt-PKMAP_BASE) >> PAGE_SHIFT)
#define PKMAP_ADDR(nr) (PKMAP_BASE + ((nr) << PAGE_SHIFT))
@@ -85,7 +100,7 @@ static inline void *kmap_atomic_prot(struct page *page, enum km_type type, pgpro
BUG_ON(!pte_none(*(kmap_pte-idx)));
#endif
__set_pte_at(&init_mm, vaddr, kmap_pte-idx, mk_pte(page, prot));
- flush_tlb_page(NULL, vaddr);
+ local_flush_tlb_page(NULL, vaddr);
return (void*) vaddr;
}
@@ -113,7 +128,7 @@ static inline void kunmap_atomic(void *kvaddr, enum km_type type)
* this pte without first remap it
*/
pte_clear(&init_mm, vaddr, kmap_pte-idx);
- flush_tlb_page(NULL, vaddr);
+ local_flush_tlb_page(NULL, vaddr);
#endif
pagefault_enable();
}
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 08266d2728b315f78d4b48231d5ac2db7bce2eb4..494cd8b0a278a8b8299f149cd765505513c6b3bb 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -713,13 +713,6 @@ static inline void * phys_to_virt(unsigned long address)
*/
#define page_to_phys(page) ((phys_addr_t)page_to_pfn(page) << PAGE_SHIFT)
-/* We do NOT want virtual merging, it would put too much pressure on
- * our iommu allocator. Instead, we want drivers to be smart enough
- * to coalesce sglists that happen to have been mapped in a contiguous
- * way by the iommu
- */
-#define BIO_VMERGE_BOUNDARY 0
-
/*
* 32 bits still uses virt_to_bus() for it's implementation of DMA
* mappings se we have to keep it defined here. We also have some old
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
index b07ebb9784d365b61d4216969fe24fa5c697e269..5ebfe5d3c61ff23c8dd411f8ed8816d0e5286c01 100644
--- a/arch/powerpc/include/asm/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
@@ -1,6 +1,8 @@
#ifndef _PPC64_KDUMP_H
#define _PPC64_KDUMP_H
+#include
+
/* Kdump kernel runs at 32 MB, change at your peril. */
#define KDUMP_KERNELBASE 0x2000000
@@ -11,8 +13,19 @@
#ifdef CONFIG_CRASH_DUMP
+/*
+ * On PPC64 translation is disabled during trampoline setup, so we use
+ * physical addresses. Though on PPC32 translation is already enabled,
+ * so we can't do the same. Luckily create_trampoline() creates relative
+ * branches, so we can just add the PAGE_OFFSET and don't worry about it.
+ */
+#ifdef __powerpc64__
#define KDUMP_TRAMPOLINE_START 0x0100
#define KDUMP_TRAMPOLINE_END 0x3000
+#else
+#define KDUMP_TRAMPOLINE_START (0x0100 + PAGE_OFFSET)
+#define KDUMP_TRAMPOLINE_END (0x3000 + PAGE_OFFSET)
+#endif /* __powerpc64__ */
#define KDUMP_MIN_TCE_ENTRIES 2048
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index 3736d9b332896bb83ba0b9c5c7358e4510766386..6dbffc9817024d684420ea7144d68e66f477d119 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -33,12 +33,12 @@
#ifndef __ASSEMBLY__
#include
+#include
typedef void (*crash_shutdown_t)(void);
#ifdef CONFIG_KEXEC
-#ifdef __powerpc64__
/*
* This function is responsible for capturing register states if coming
* via panic or invoking dump using sysrq-trigger.
@@ -48,6 +48,7 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
{
if (oldregs)
memcpy(newregs, oldregs, sizeof(*newregs));
+#ifdef __powerpc64__
else {
/* FIXME Merge this with xmon_save_regs ?? */
unsigned long tmp1, tmp2;
@@ -100,15 +101,11 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
: "b" (newregs)
: "memory");
}
-}
#else
-/*
- * Provide a dummy definition to avoid build failures. Will remain
- * empty till crash dump support is enabled.
- */
-static inline void crash_setup_regs(struct pt_regs *newregs,
- struct pt_regs *oldregs) { }
-#endif /* !__powerpc64 __ */
+ else
+ ppc_save_regs(newregs);
+#endif /* __powerpc64__ */
+}
extern void kexec_smp_wait(void); /* get and clear naca physid, wait for
master to copy new code to 0 */
diff --git a/arch/powerpc/include/asm/local.h b/arch/powerpc/include/asm/local.h
index 612d8327665351c43b39dcd41e5323178ecc6f60..84b457a3c1bcda476a0c475d2bddf594a134e9bc 100644
--- a/arch/powerpc/include/asm/local.h
+++ b/arch/powerpc/include/asm/local.h
@@ -67,7 +67,7 @@ static __inline__ long local_inc_return(local_t *l)
bne- 1b"
: "=&r" (t)
: "r" (&(l->a.counter))
- : "cc", "memory");
+ : "cc", "xer", "memory");
return t;
}
@@ -94,7 +94,7 @@ static __inline__ long local_dec_return(local_t *l)
bne- 1b"
: "=&r" (t)
: "r" (&(l->a.counter))
- : "cc", "memory");
+ : "cc", "xer", "memory");
return t;
}
diff --git a/arch/powerpc/include/asm/lppaca.h b/arch/powerpc/include/asm/lppaca.h
index 2fe268b10333433ad6b2e40bcf2d90c392c45798..25aaa97facd821954a2a85a53fafe67497082e50 100644
--- a/arch/powerpc/include/asm/lppaca.h
+++ b/arch/powerpc/include/asm/lppaca.h
@@ -133,7 +133,8 @@ struct lppaca {
//=============================================================================
// CACHE_LINE_4-5 0x0180 - 0x027F Contains PMC interrupt data
//=============================================================================
- u8 pmc_save_area[256]; // PMC interrupt Area x00-xFF
+ u32 page_ins; // CMO Hint - # page ins by OS x00-x04
+ u8 pmc_save_area[252]; // PMC interrupt Area x04-xFF
} __attribute__((__aligned__(0x400)));
extern struct lppaca lppaca[];
diff --git a/arch/powerpc/include/asm/mmu-40x.h b/arch/powerpc/include/asm/mmu-40x.h
index 3d108676584c8ef6cf0c4ac7e3cb813939a358a8..776f415a36aa36da64c4d78084514730a16d2c61 100644
--- a/arch/powerpc/include/asm/mmu-40x.h
+++ b/arch/powerpc/include/asm/mmu-40x.h
@@ -54,8 +54,9 @@
#ifndef __ASSEMBLY__
typedef struct {
- unsigned long id;
- unsigned long vdso_base;
+ unsigned int id;
+ unsigned int active;
+ unsigned long vdso_base;
} mm_context_t;
#endif /* !__ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/mmu-44x.h b/arch/powerpc/include/asm/mmu-44x.h
index a825524c981a3965bda27107e53e83b62e7b4c13..8a97cfb08b7e9eaad3a6149ce3285e6ad9507234 100644
--- a/arch/powerpc/include/asm/mmu-44x.h
+++ b/arch/powerpc/include/asm/mmu-44x.h
@@ -4,6 +4,8 @@
* PPC440 support
*/
+#include
+
#define PPC44x_MMUCR_TID 0x000000ff
#define PPC44x_MMUCR_STS 0x00010000
@@ -56,8 +58,9 @@
extern unsigned int tlb_44x_hwater;
typedef struct {
- unsigned long id;
- unsigned long vdso_base;
+ unsigned int id;
+ unsigned int active;
+ unsigned long vdso_base;
} mm_context_t;
#endif /* !__ASSEMBLY__ */
@@ -73,4 +76,19 @@ typedef struct {
/* Size of the TLBs used for pinning in lowmem */
#define PPC_PIN_SIZE (1 << 28) /* 256M */
+#if (PAGE_SHIFT == 12)
+#define PPC44x_TLBE_SIZE PPC44x_TLB_4K
+#elif (PAGE_SHIFT == 14)
+#define PPC44x_TLBE_SIZE PPC44x_TLB_16K
+#elif (PAGE_SHIFT == 16)
+#define PPC44x_TLBE_SIZE PPC44x_TLB_64K
+#else
+#error "Unsupported PAGE_SIZE"
+#endif
+
+#define PPC44x_PGD_OFF_SHIFT (32 - PGDIR_SHIFT + PGD_T_LOG2)
+#define PPC44x_PGD_OFF_MASK_BIT (PGDIR_SHIFT - PGD_T_LOG2)
+#define PPC44x_PTE_ADD_SHIFT (32 - PGDIR_SHIFT + PTE_SHIFT + PTE_T_LOG2)
+#define PPC44x_PTE_ADD_MASK_BIT (32 - PTE_T_LOG2 - PTE_SHIFT)
+
#endif /* _ASM_POWERPC_MMU_44X_H_ */
diff --git a/arch/powerpc/include/asm/mmu-8xx.h b/arch/powerpc/include/asm/mmu-8xx.h
index 9db877eb88db4f28d1eefce0321add39ce85ca82..07865a357848e66f204f7e9a94da1191eec72cac 100644
--- a/arch/powerpc/include/asm/mmu-8xx.h
+++ b/arch/powerpc/include/asm/mmu-8xx.h
@@ -137,7 +137,8 @@
#ifndef __ASSEMBLY__
typedef struct {
- unsigned long id;
+ unsigned int id;
+ unsigned int active;
unsigned long vdso_base;
} mm_context_t;
#endif /* !__ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/mmu-fsl-booke.h b/arch/powerpc/include/asm/mmu-fsl-booke.h
index 925d93cf64d8596f5b376a6b7740cc7193b25a95..3f941c0f7e8eb504dd921e2a89b3f93087fb66ca 100644
--- a/arch/powerpc/include/asm/mmu-fsl-booke.h
+++ b/arch/powerpc/include/asm/mmu-fsl-booke.h
@@ -40,6 +40,8 @@
#define MAS2_M 0x00000004
#define MAS2_G 0x00000002
#define MAS2_E 0x00000001
+#define MAS2_EPN_MASK(size) (~0 << (2*(size) + 10))
+#define MAS2_VAL(addr, size, flags) ((addr) & MAS2_EPN_MASK(size) | (flags))
#define MAS3_RPN 0xFFFFF000
#define MAS3_U0 0x00000200
@@ -74,8 +76,9 @@
#ifndef __ASSEMBLY__
typedef struct {
- unsigned long id;
- unsigned long vdso_base;
+ unsigned int id;
+ unsigned int active;
+ unsigned long vdso_base;
} mm_context_t;
#endif /* !__ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 4c0e1b4f975c369e2655b29c8bf660d9b05ac8a6..6e76399113189baaf849676a188127efb46e4e5a 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -2,6 +2,63 @@
#define _ASM_POWERPC_MMU_H_
#ifdef __KERNEL__
+#include
+#include
+
+/*
+ * MMU features bit definitions
+ */
+
+/*
+ * First half is MMU families
+ */
+#define MMU_FTR_HPTE_TABLE ASM_CONST(0x00000001)
+#define MMU_FTR_TYPE_8xx ASM_CONST(0x00000002)
+#define MMU_FTR_TYPE_40x ASM_CONST(0x00000004)
+#define MMU_FTR_TYPE_44x ASM_CONST(0x00000008)
+#define MMU_FTR_TYPE_FSL_E ASM_CONST(0x00000010)
+
+/*
+ * This is individual features
+ */
+
+/* Enable use of high BAT registers */
+#define MMU_FTR_USE_HIGH_BATS ASM_CONST(0x00010000)
+
+/* Enable >32-bit physical addresses on 32-bit processor, only used
+ * by CONFIG_6xx currently as BookE supports that from day 1
+ */
+#define MMU_FTR_BIG_PHYS ASM_CONST(0x00020000)
+
+/* Enable use of broadcast TLB invalidations. We don't always set it
+ * on processors that support it due to other constraints with the
+ * use of such invalidations
+ */
+#define MMU_FTR_USE_TLBIVAX_BCAST ASM_CONST(0x00040000)
+
+/* Enable use of tlbilx invalidate-by-PID variant.
+ */
+#define MMU_FTR_USE_TLBILX_PID ASM_CONST(0x00080000)
+
+/* This indicates that the processor cannot handle multiple outstanding
+ * broadcast tlbivax or tlbsync. This makes the code use a spinlock
+ * around such invalidate forms.
+ */
+#define MMU_FTR_LOCK_BCAST_INVAL ASM_CONST(0x00100000)
+
+#ifndef __ASSEMBLY__
+#include
+
+static inline int mmu_has_feature(unsigned long feature)
+{
+ return (cur_cpu_spec->mmu_features & feature);
+}
+
+extern unsigned int __start___mmu_ftr_fixup, __stop___mmu_ftr_fixup;
+
+#endif /* !__ASSEMBLY__ */
+
+
#ifdef CONFIG_PPC64
/* 64-bit classic hash table MMU */
# include
diff --git a/arch/powerpc/include/asm/mmu_context.h b/arch/powerpc/include/asm/mmu_context.h
index 6b993ef452ff8010c6c539f34145621fa6b3c4dd..ab4f19263c4286b199a084ea5dff32259d50820b 100644
--- a/arch/powerpc/include/asm/mmu_context.h
+++ b/arch/powerpc/include/asm/mmu_context.h
@@ -2,237 +2,26 @@
#define __ASM_POWERPC_MMU_CONTEXT_H
#ifdef __KERNEL__
+#include
+#include
+#include
+#include
#include
#include
#include
-
-#ifndef CONFIG_PPC64
-#include
-#include
-
-/*
- * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
- * (virtual segment identifiers) for each context. Although the
- * hardware supports 24-bit VSIDs, and thus >1 million contexts,
- * we only use 32,768 of them. That is ample, since there can be
- * at most around 30,000 tasks in the system anyway, and it means
- * that we can use a bitmap to indicate which contexts are in use.
- * Using a bitmap means that we entirely avoid all of the problems
- * that we used to have when the context number overflowed,
- * particularly on SMP systems.
- * -- paulus.
- */
-
-/*
- * This function defines the mapping from contexts to VSIDs (virtual
- * segment IDs). We use a skew on both the context and the high 4 bits
- * of the 32-bit virtual address (the "effective segment ID") in order
- * to spread out the entries in the MMU hash table. Note, if this
- * function is changed then arch/ppc/mm/hashtable.S will have to be
- * changed to correspond.
- */
-#define CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
- & 0xffffff)
-
-/*
- The MPC8xx has only 16 contexts. We rotate through them on each
- task switch. A better way would be to keep track of tasks that
- own contexts, and implement an LRU usage. That way very active
- tasks don't always have to pay the TLB reload overhead. The
- kernel pages are mapped shared, so the kernel can run on behalf
- of any task that makes a kernel entry. Shared does not mean they
- are not protected, just that the ASID comparison is not performed.
- -- Dan
-
- The IBM4xx has 256 contexts, so we can just rotate through these
- as a way of "switching" contexts. If the TID of the TLB is zero,
- the PID/TID comparison is disabled, so we can use a TID of zero
- to represent all kernel pages as shared among all contexts.
- -- Dan
- */
-
-static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
-{
-}
-
-#ifdef CONFIG_8xx
-#define NO_CONTEXT 16
-#define LAST_CONTEXT 15
-#define FIRST_CONTEXT 0
-
-#elif defined(CONFIG_4xx)
-#define NO_CONTEXT 256
-#define LAST_CONTEXT 255
-#define FIRST_CONTEXT 1
-
-#elif defined(CONFIG_E200) || defined(CONFIG_E500)
-#define NO_CONTEXT 256
-#define LAST_CONTEXT 255
-#define FIRST_CONTEXT 1
-
-#else
-
-/* PPC 6xx, 7xx CPUs */
-#define NO_CONTEXT ((unsigned long) -1)
-#define LAST_CONTEXT 32767
-#define FIRST_CONTEXT 1
-#endif
-
-/*
- * Set the current MMU context.
- * On 32-bit PowerPCs (other than the 8xx embedded chips), this is done by
- * loading up the segment registers for the user part of the address space.
- *
- * Since the PGD is immediately available, it is much faster to simply
- * pass this along as a second parameter, which is required for 8xx and
- * can be used for debugging on all processors (if you happen to have
- * an Abatron).
- */
-extern void set_context(unsigned long contextid, pgd_t *pgd);
-
-/*
- * Bitmap of contexts in use.
- * The size of this bitmap is LAST_CONTEXT + 1 bits.
- */
-extern unsigned long context_map[];
-
-/*
- * This caches the next context number that we expect to be free.
- * Its use is an optimization only, we can't rely on this context
- * number to be free, but it usually will be.
- */
-extern unsigned long next_mmu_context;
-
-/*
- * If we don't have sufficient contexts to give one to every task
- * that could be in the system, we need to be able to steal contexts.
- * These variables support that.
- */
-#if LAST_CONTEXT < 30000
-#define FEW_CONTEXTS 1
-extern atomic_t nr_free_contexts;
-extern struct mm_struct *context_mm[LAST_CONTEXT+1];
-extern void steal_context(void);
-#endif
-
-/*
- * Get a new mmu context for the address space described by `mm'.
- */
-static inline void get_mmu_context(struct mm_struct *mm)
-{
- unsigned long ctx;
-
- if (mm->context.id != NO_CONTEXT)
- return;
-#ifdef FEW_CONTEXTS
- while (atomic_dec_if_positive(&nr_free_contexts) < 0)
- steal_context();
-#endif
- ctx = next_mmu_context;
- while (test_and_set_bit(ctx, context_map)) {
- ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
- if (ctx > LAST_CONTEXT)
- ctx = 0;
- }
- next_mmu_context = (ctx + 1) & LAST_CONTEXT;
- mm->context.id = ctx;
-#ifdef FEW_CONTEXTS
- context_mm[ctx] = mm;
-#endif
-}
-
-/*
- * Set up the context for a new address space.
- */
-static inline int init_new_context(struct task_struct *t, struct mm_struct *mm)
-{
- mm->context.id = NO_CONTEXT;
- return 0;
-}
-
-/*
- * We're finished using the context for an address space.
- */
-static inline void destroy_context(struct mm_struct *mm)
-{
- preempt_disable();
- if (mm->context.id != NO_CONTEXT) {
- clear_bit(mm->context.id, context_map);
- mm->context.id = NO_CONTEXT;
-#ifdef FEW_CONTEXTS
- atomic_inc(&nr_free_contexts);
-#endif
- }
- preempt_enable();
-}
-
-static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
- struct task_struct *tsk)
-{
-#ifdef CONFIG_ALTIVEC
- if (cpu_has_feature(CPU_FTR_ALTIVEC))
- asm volatile ("dssall;\n"
-#ifndef CONFIG_POWER4
- "sync;\n" /* G4 needs a sync here, G5 apparently not */
-#endif
- : : );
-#endif /* CONFIG_ALTIVEC */
-
- tsk->thread.pgdir = next->pgd;
-
- /* No need to flush userspace segments if the mm doesnt change */
- if (prev == next)
- return;
-
- /* Setup new userspace context */
- get_mmu_context(next);
- set_context(next->context.id, next->pgd);
-}
-
-#define deactivate_mm(tsk,mm) do { } while (0)
+#include
/*
- * After we have set current->mm to a new value, this activates
- * the context for the new mm so we see the new mappings.
+ * Most if the context management is out of line
*/
-#define activate_mm(active_mm, mm) switch_mm(active_mm, mm, current)
-
extern void mmu_context_init(void);
-
-
-#else
-
-#include
-#include
-#include
-
-/*
- * Copyright (C) 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-static inline void enter_lazy_tlb(struct mm_struct *mm,
- struct task_struct *tsk)
-{
-}
-
-/*
- * The proto-VSID space has 2^35 - 1 segments available for user mappings.
- * Each segment contains 2^28 bytes. Each context maps 2^44 bytes,
- * so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
- */
-#define NO_CONTEXT 0
-#define MAX_CONTEXT ((1UL << 19) - 1)
-
extern int init_new_context(struct task_struct *tsk, struct mm_struct *mm);
extern void destroy_context(struct mm_struct *mm);
+extern void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next);
extern void switch_stab(struct task_struct *tsk, struct mm_struct *mm);
extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
+extern void set_context(unsigned long id, pgd_t *pgd);
/*
* switch_mm is the entry point called from the architecture independent
@@ -241,22 +30,39 @@ extern void switch_slb(struct task_struct *tsk, struct mm_struct *mm);
static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
- if (!cpu_isset(smp_processor_id(), next->cpu_vm_mask))
- cpu_set(smp_processor_id(), next->cpu_vm_mask);
+ /* Mark this context has been used on the new CPU */
+ cpu_set(smp_processor_id(), next->cpu_vm_mask);
+
+ /* 32-bit keeps track of the current PGDIR in the thread struct */
+#ifdef CONFIG_PPC32
+ tsk->thread.pgdir = next->pgd;
+#endif /* CONFIG_PPC32 */
- /* No need to flush userspace segments if the mm doesnt change */
+ /* Nothing else to do if we aren't actually switching */
if (prev == next)
return;
+ /* We must stop all altivec streams before changing the HW
+ * context
+ */
#ifdef CONFIG_ALTIVEC
if (cpu_has_feature(CPU_FTR_ALTIVEC))
asm volatile ("dssall");
#endif /* CONFIG_ALTIVEC */
+ /* The actual HW switching method differs between the various
+ * sub architectures.
+ */
+#ifdef CONFIG_PPC_STD_MMU_64
if (cpu_has_feature(CPU_FTR_SLB))
switch_slb(tsk, next);
else
switch_stab(tsk, next);
+#else
+ /* Out of line for now */
+ switch_mmu_context(prev, next);
+#endif
+
}
#define deactivate_mm(tsk,mm) do { } while (0)
@@ -274,6 +80,11 @@ static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next)
local_irq_restore(flags);
}
-#endif /* CONFIG_PPC64 */
+/* We don't currently use enter_lazy_tlb() for anything */
+static inline void enter_lazy_tlb(struct mm_struct *mm,
+ struct task_struct *tsk)
+{
+}
+
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_MMU_CONTEXT_H */
diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h
index e5f14b13ccf0ff2c11ef8392b6697750608ca919..08454880a2c047258da91b4968f080f4e38fc4af 100644
--- a/arch/powerpc/include/asm/module.h
+++ b/arch/powerpc/include/asm/module.h
@@ -34,11 +34,19 @@ struct mod_arch_specific {
#ifdef __powerpc64__
unsigned int stubs_section; /* Index of stubs section in module */
unsigned int toc_section; /* What section is the TOC? */
-#else
+#ifdef CONFIG_DYNAMIC_FTRACE
+ unsigned long toc;
+ unsigned long tramp;
+#endif
+
+#else /* powerpc64 */
/* Indices of PLT sections within module. */
unsigned int core_plt_section;
unsigned int init_plt_section;
+#ifdef CONFIG_DYNAMIC_FTRACE
+ unsigned long tramp;
#endif
+#endif /* powerpc64 */
/* List of BUG addresses, source line numbers and filenames */
struct list_head bug_list;
@@ -68,6 +76,12 @@ struct mod_arch_specific {
# endif /* MODULE */
#endif
+#ifdef CONFIG_DYNAMIC_FTRACE
+# ifdef MODULE
+ asm(".section .ftrace.tramp,\"ax\",@nobits; .align 3; .previous");
+# endif /* MODULE */
+#endif
+
struct exception_table_entry;
void sort_ex_table(struct exception_table_entry *start,
diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
index 81ef10b6b672455e2ed65d9a05e2a3556d989eef..81a23932a160c7e47aaa4ceb359e591ee7ee5c6f 100644
--- a/arch/powerpc/include/asm/mpc52xx.h
+++ b/arch/powerpc/include/asm/mpc52xx.h
@@ -239,6 +239,25 @@ struct mpc52xx_cdm {
u16 mclken_div_psc6; /* CDM + 0x36 reg13 byte2,3 */
};
+/* Interrupt controller Register set */
+struct mpc52xx_intr {
+ u32 per_mask; /* INTR + 0x00 */
+ u32 per_pri1; /* INTR + 0x04 */
+ u32 per_pri2; /* INTR + 0x08 */
+ u32 per_pri3; /* INTR + 0x0c */
+ u32 ctrl; /* INTR + 0x10 */
+ u32 main_mask; /* INTR + 0x14 */
+ u32 main_pri1; /* INTR + 0x18 */
+ u32 main_pri2; /* INTR + 0x1c */
+ u32 reserved1; /* INTR + 0x20 */
+ u32 enc_status; /* INTR + 0x24 */
+ u32 crit_status; /* INTR + 0x28 */
+ u32 main_status; /* INTR + 0x2c */
+ u32 per_status; /* INTR + 0x30 */
+ u32 reserved2; /* INTR + 0x34 */
+ u32 per_error; /* INTR + 0x38 */
+};
+
#endif /* __ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/mpc52xx_psc.h b/arch/powerpc/include/asm/mpc52xx_psc.h
index 8917ed63056593377498abaf721e3f33ecaa3b1e..a218da6bec7c5ea69091196d363b9cb7c51158b0 100644
--- a/arch/powerpc/include/asm/mpc52xx_psc.h
+++ b/arch/powerpc/include/asm/mpc52xx_psc.h
@@ -68,12 +68,20 @@
#define MPC52xx_PSC_IMR_ORERR 0x1000
#define MPC52xx_PSC_IMR_IPC 0x8000
-/* PSC input port change bit */
+/* PSC input port change bits */
#define MPC52xx_PSC_CTS 0x01
#define MPC52xx_PSC_DCD 0x02
#define MPC52xx_PSC_D_CTS 0x10
#define MPC52xx_PSC_D_DCD 0x20
+/* PSC acr bits */
+#define MPC52xx_PSC_IEC_CTS 0x01
+#define MPC52xx_PSC_IEC_DCD 0x02
+
+/* PSC output port bits */
+#define MPC52xx_PSC_OP_RTS 0x01
+#define MPC52xx_PSC_OP_RES 0x02
+
/* PSC mode fields */
#define MPC52xx_PSC_MODE_5_BITS 0x00
#define MPC52xx_PSC_MODE_6_BITS 0x01
@@ -91,6 +99,7 @@
#define MPC52xx_PSC_MODE_ONE_STOP_5_BITS 0x00
#define MPC52xx_PSC_MODE_ONE_STOP 0x07
#define MPC52xx_PSC_MODE_TWO_STOP 0x0f
+#define MPC52xx_PSC_MODE_TXCTS 0x10
#define MPC52xx_PSC_RFNUM_MASK 0x01ff
diff --git a/arch/powerpc/include/asm/mutex.h b/arch/powerpc/include/asm/mutex.h
index 458c1f7fbc1808d48982aa0c5fe89bfe3df2098c..dabc01c727b86efb4b35c1d8f30e58e0ce95ede4 100644
--- a/arch/powerpc/include/asm/mutex.h
+++ b/arch/powerpc/include/asm/mutex.h
@@ -1,9 +1,134 @@
/*
- * Pull in the generic implementation for the mutex fastpath.
+ * Optimised mutex implementation of include/asm-generic/mutex-dec.h algorithm
+ */
+#ifndef _ASM_POWERPC_MUTEX_H
+#define _ASM_POWERPC_MUTEX_H
+
+static inline int __mutex_cmpxchg_lock(atomic_t *v, int old, int new)
+{
+ int t;
+
+ __asm__ __volatile__ (
+"1: lwarx %0,0,%1 # mutex trylock\n\
+ cmpw 0,%0,%2\n\
+ bne- 2f\n"
+ PPC405_ERR77(0,%1)
+" stwcx. %3,0,%1\n\
+ bne- 1b"
+ ISYNC_ON_SMP
+ "\n\
+2:"
+ : "=&r" (t)
+ : "r" (&v->counter), "r" (old), "r" (new)
+ : "cc", "memory");
+
+ return t;
+}
+
+static inline int __mutex_dec_return_lock(atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__(
+"1: lwarx %0,0,%1 # mutex lock\n\
+ addic %0,%0,-1\n"
+ PPC405_ERR77(0,%1)
+" stwcx. %0,0,%1\n\
+ bne- 1b"
+ ISYNC_ON_SMP
+ : "=&r" (t)
+ : "r" (&v->counter)
+ : "cc", "memory");
+
+ return t;
+}
+
+static inline int __mutex_inc_return_unlock(atomic_t *v)
+{
+ int t;
+
+ __asm__ __volatile__(
+ LWSYNC_ON_SMP
+"1: lwarx %0,0,%1 # mutex unlock\n\
+ addic %0,%0,1\n"
+ PPC405_ERR77(0,%1)
+" stwcx. %0,0,%1 \n\
+ bne- 1b"
+ : "=&r" (t)
+ : "r" (&v->counter)
+ : "cc", "memory");
+
+ return t;
+}
+
+/**
+ * __mutex_fastpath_lock - try to take the lock by moving the count
+ * from 1 to a 0 value
+ * @count: pointer of type atomic_t
+ * @fail_fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call if
+ * it wasn't 1 originally. This function MUST leave the value lower than
+ * 1 even when the "1" assertion wasn't true.
+ */
+static inline void
+__mutex_fastpath_lock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+ if (unlikely(__mutex_dec_return_lock(count) < 0))
+ fail_fn(count);
+}
+
+/**
+ * __mutex_fastpath_lock_retval - try to take the lock by moving the count
+ * from 1 to a 0 value
+ * @count: pointer of type atomic_t
+ * @fail_fn: function to call if the original value was not 1
+ *
+ * Change the count from 1 to a value lower than 1, and call if
+ * it wasn't 1 originally. This function returns 0 if the fastpath succeeds,
+ * or anything the slow path function returns.
+ */
+static inline int
+__mutex_fastpath_lock_retval(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+ if (unlikely(__mutex_dec_return_lock(count) < 0))
+ return fail_fn(count);
+ return 0;
+}
+
+/**
+ * __mutex_fastpath_unlock - try to promote the count from 0 to 1
+ * @count: pointer of type atomic_t
+ * @fail_fn: function to call if the original value was not 0
+ *
+ * Try to promote the count from 0 to 1. If it wasn't 0, call .
+ * In the failure case, this function is allowed to either set the value to
+ * 1, or to set it to a value lower than 1.
+ */
+static inline void
+__mutex_fastpath_unlock(atomic_t *count, void (*fail_fn)(atomic_t *))
+{
+ if (unlikely(__mutex_inc_return_unlock(count) <= 0))
+ fail_fn(count);
+}
+
+#define __mutex_slowpath_needs_to_unlock() 1
+
+/**
+ * __mutex_fastpath_trylock - try to acquire the mutex, without waiting
+ *
+ * @count: pointer of type atomic_t
+ * @fail_fn: fallback function
*
- * TODO: implement optimized primitives instead, or leave the generic
- * implementation in place, or pick the atomic_xchg() based generic
- * implementation. (see asm-generic/mutex-xchg.h for details)
+ * Change the count from 1 to 0, and return 1 (success), or if the count
+ * was not 1, then return 0 (failure).
*/
+static inline int
+__mutex_fastpath_trylock(atomic_t *count, int (*fail_fn)(atomic_t *))
+{
+ if (likely(__mutex_cmpxchg_lock(count, 1, 0) == 1))
+ return 1;
+ return 0;
+}
-#include
+#endif
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index c0b8d4a29a91cd34c7e10bb45608d7e9fe83fee0..197d569f5bd3c44a1f3718f0714e165b72a453de 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -19,12 +19,15 @@
#include
/*
- * On PPC32 page size is 4K. For PPC64 we support either 4K or 64K software
+ * On regular PPC32 page size is 4K (but we support 4K/16K/64K pages
+ * on PPC44x). For PPC64 we support either 4K or 64K software
* page size. When using 64K pages however, whether we are really supporting
* 64K pages in HW or not is irrelevant to those definitions.
*/
-#ifdef CONFIG_PPC_64K_PAGES
+#if defined(CONFIG_PPC_64K_PAGES)
#define PAGE_SHIFT 16
+#elif defined(CONFIG_PPC_16K_PAGES)
+#define PAGE_SHIFT 14
#else
#define PAGE_SHIFT 12
#endif
@@ -151,7 +154,7 @@ typedef struct { pte_basic_t pte; } pte_t;
/* 64k pages additionally define a bigger "real PTE" type that gathers
* the "second half" part of the PTE for pseudo 64k pages
*/
-#ifdef CONFIG_PPC_64K_PAGES
+#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_PPC_STD_MMU_64)
typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
#else
typedef struct { pte_t pte; } real_pte_t;
@@ -191,10 +194,10 @@ typedef pte_basic_t pte_t;
#define pte_val(x) (x)
#define __pte(x) (x)
-#ifdef CONFIG_PPC_64K_PAGES
+#if defined(CONFIG_PPC_64K_PAGES) && defined(CONFIG_PPC_STD_MMU_64)
typedef struct { pte_t pte; unsigned long hidx; } real_pte_t;
#else
-typedef unsigned long real_pte_t;
+typedef pte_t real_pte_t;
#endif
diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h
index d77072a32cc68b2553b1e329542b1f4925656c57..1458d95003814dbc591d6e0d5b124485488218c9 100644
--- a/arch/powerpc/include/asm/page_32.h
+++ b/arch/powerpc/include/asm/page_32.h
@@ -19,6 +19,8 @@
#define PTE_FLAGS_OFFSET 0
#endif
+#define PTE_SHIFT (PAGE_SHIFT - PTE_T_LOG2) /* full page */
+
#ifndef __ASSEMBLY__
/*
* The basic type of a PTE - 64 bits for those CPUs with > 32 bit
@@ -26,10 +28,8 @@
*/
#ifdef CONFIG_PTE_64BIT
typedef unsigned long long pte_basic_t;
-#define PTE_SHIFT (PAGE_SHIFT - 3) /* 512 ptes per page */
#else
typedef unsigned long pte_basic_t;
-#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */
#endif
struct page;
@@ -39,6 +39,9 @@ extern void copy_page(void *to, void *from);
#include
+#define PGD_T_LOG2 (__builtin_ffs(sizeof(pgd_t)) - 1)
+#define PTE_T_LOG2 (__builtin_ffs(sizeof(pte_t)) - 1)
+
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_PAGE_32_H */
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 9047af7baa697afad42e89b19f2cfdd893ad7430..84007afabdb52a307d0f0a34fb7c8877091eb79a 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -13,7 +13,6 @@
struct device_node;
-extern unsigned int ppc_pci_flags;
enum {
/* Force re-assigning all resources (ignore firmware
* setup completely)
@@ -36,6 +35,31 @@ enum {
/* ... except for domain 0 */
PPC_PCI_COMPAT_DOMAIN_0 = 0x00000020,
};
+#ifdef CONFIG_PCI
+extern unsigned int ppc_pci_flags;
+
+static inline void ppc_pci_set_flags(int flags)
+{
+ ppc_pci_flags = flags;
+}
+
+static inline void ppc_pci_add_flags(int flags)
+{
+ ppc_pci_flags |= flags;
+}
+
+static inline int ppc_pci_has_flag(int flag)
+{
+ return (ppc_pci_flags & flag);
+}
+#else
+static inline void ppc_pci_set_flags(int flags) { }
+static inline void ppc_pci_add_flags(int flags) { }
+static inline int ppc_pci_has_flag(int flag)
+{
+ return 0;
+}
+#endif
/*
@@ -241,9 +265,6 @@ extern void pcibios_remove_pci_devices(struct pci_bus *bus);
/** Discover new pci devices under this bus, and add them */
extern void pcibios_add_pci_devices(struct pci_bus *bus);
-extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus);
-
-extern int pcibios_remove_root_bus(struct pci_controller *phb);
static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus)
{
@@ -290,6 +311,7 @@ extern void pci_process_bridge_OF_ranges(struct pci_controller *hose,
/* Allocate & free a PCI host bridge structure */
extern struct pci_controller *pcibios_alloc_controller(struct device_node *dev);
extern void pcibios_free_controller(struct pci_controller *phb);
+extern void pcibios_setup_phb_resources(struct pci_controller *hose);
#ifdef CONFIG_PCI
extern unsigned long pci_address_to_pio(phys_addr_t address);
diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h
index 57a2a494886befada20215df66518bfe37ec6e17..3548159a1beb98b55ef6c7e39985da655f85920d 100644
--- a/arch/powerpc/include/asm/pci.h
+++ b/arch/powerpc/include/asm/pci.h
@@ -38,8 +38,8 @@ struct pci_dev;
* Set this to 1 if you want the kernel to re-assign all PCI
* bus numbers (don't do that on ppc64 yet !)
*/
-#define pcibios_assign_all_busses() (ppc_pci_flags & \
- PPC_PCI_REASSIGN_ALL_BUS)
+#define pcibios_assign_all_busses() \
+ (ppc_pci_has_flag(PPC_PCI_REASSIGN_ALL_BUS))
#define pcibios_scan_all_fns(a, b) 0
static inline void pcibios_set_master(struct pci_dev *dev)
@@ -204,15 +204,14 @@ static inline struct resource *pcibios_select_root(struct pci_dev *pdev,
return root;
}
-extern void pcibios_setup_new_device(struct pci_dev *dev);
-
extern void pcibios_claim_one_bus(struct pci_bus *b);
-extern void pcibios_allocate_bus_resources(struct pci_bus *bus);
+extern void pcibios_finish_adding_to_bus(struct pci_bus *bus);
extern void pcibios_resource_survey(void);
extern struct pci_controller *init_phb_dynamic(struct device_node *dn);
+extern int remove_phb_dynamic(struct pci_controller *phb);
extern struct pci_dev *of_create_pci_dev(struct device_node *node,
struct pci_bus *bus, int devfn);
@@ -221,6 +220,7 @@ extern void of_scan_pci_bridge(struct device_node *node,
struct pci_dev *dev);
extern void of_scan_bus(struct device_node *node, struct pci_bus *bus);
+extern void of_rescan_bus(struct device_node *node, struct pci_bus *bus);
extern int pci_read_irq_line(struct pci_dev *dev);
@@ -235,9 +235,8 @@ extern void pci_resource_to_user(const struct pci_dev *dev, int bar,
const struct resource *rsrc,
resource_size_t *start, resource_size_t *end);
-extern void pcibios_do_bus_setup(struct pci_bus *bus);
-extern void pcibios_fixup_of_probed_bus(struct pci_bus *bus);
-
+extern void pcibios_setup_bus_devices(struct pci_bus *bus);
+extern void pcibios_setup_bus_self(struct pci_bus *bus);
#endif /* __KERNEL__ */
#endif /* __ASM_POWERPC_PCI_H */
diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
index 58c07147b3ea445c17851c8cb5ab8489a6432805..0815eb40acae214b8947a4da26d565bfaf4fb8a7 100644
--- a/arch/powerpc/include/asm/pgalloc-32.h
+++ b/arch/powerpc/include/asm/pgalloc-32.h
@@ -3,6 +3,8 @@
#include
+#define PTE_NONCACHE_NUM 0 /* dummy for now to share code w/ppc64 */
+
extern void __bad_pte(pmd_t *pmd);
extern pgd_t *pgd_alloc(struct mm_struct *mm);
@@ -33,10 +35,13 @@ extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
extern pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long addr);
-extern void pte_free_kernel(struct mm_struct *mm, pte_t *pte);
-extern void pte_free(struct mm_struct *mm, pgtable_t pte);
-#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
+static inline void pgtable_free(pgtable_free_t pgf)
+{
+ void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
+
+ free_page((unsigned long)p);
+}
#define check_pgt_cache() do { } while (0)
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index 812a1d8f35cbc58f21d9096b3ef00c8678d930f9..afda2bdd860f8bc8eb20dbb915701fface743ce6 100644
--- a/arch/powerpc/include/asm/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -7,7 +7,6 @@
* 2 of the License, or (at your option) any later version.
*/
-#include
#include
#include
#include
@@ -108,31 +107,6 @@ static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
return page;
}
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
- free_page((unsigned long)pte);
-}
-
-static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
-{
- pgtable_page_dtor(ptepage);
- __free_page(ptepage);
-}
-
-#define PGF_CACHENUM_MASK 0x7
-
-typedef struct pgtable_free {
- unsigned long val;
-} pgtable_free_t;
-
-static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
- unsigned long mask)
-{
- BUG_ON(cachenum > PGF_CACHENUM_MASK);
-
- return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum};
-}
-
static inline void pgtable_free(pgtable_free_t pgf)
{
void *p = (void *)(pgf.val & ~PGF_CACHENUM_MASK);
@@ -144,14 +118,6 @@ static inline void pgtable_free(pgtable_free_t pgf)
kmem_cache_free(pgtable_cache[cachenum], p);
}
-extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
-
-#define __pte_free_tlb(tlb,ptepage) \
-do { \
- pgtable_page_dtor(ptepage); \
- pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
- PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
-} while (0)
#define __pmd_free_tlb(tlb, pmd) \
pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
index b4505ed0f0f26843c6432a25cec991f16ecd0130..5d8480265a77561bfa48cb2b82eb2fca9b4a4fd2 100644
--- a/arch/powerpc/include/asm/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -2,11 +2,52 @@
#define _ASM_POWERPC_PGALLOC_H
#ifdef __KERNEL__
+#include
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ free_page((unsigned long)pte);
+}
+
+static inline void pte_free(struct mm_struct *mm, pgtable_t ptepage)
+{
+ pgtable_page_dtor(ptepage);
+ __free_page(ptepage);
+}
+
+typedef struct pgtable_free {
+ unsigned long val;
+} pgtable_free_t;
+
+#define PGF_CACHENUM_MASK 0x7
+
+static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
+ unsigned long mask)
+{
+ BUG_ON(cachenum > PGF_CACHENUM_MASK);
+
+ return (pgtable_free_t){.val = ((unsigned long) p & ~mask) | cachenum};
+}
+
#ifdef CONFIG_PPC64
#include
#else
#include
#endif
+extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
+
+#ifdef CONFIG_SMP
+#define __pte_free_tlb(tlb,ptepage) \
+do { \
+ pgtable_page_dtor(ptepage); \
+ pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
+ PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
+} while (0)
+#else
+#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
+#endif
+
+
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_PGALLOC_H */
diff --git a/arch/powerpc/include/asm/pgtable-ppc32.h b/arch/powerpc/include/asm/pgtable-ppc32.h
index 6ab7c67cb5ab6355ba453e4832ad55bcdb03ec85..f69a4d97772904ea5c42beda4748a8d4cc085202 100644
--- a/arch/powerpc/include/asm/pgtable-ppc32.h
+++ b/arch/powerpc/include/asm/pgtable-ppc32.h
@@ -228,9 +228,10 @@ extern int icache_44x_need_flush;
* - FILE *must* be in the bottom three bits because swap cache
* entries use the top 29 bits for TLB2.
*
- * - CACHE COHERENT bit (M) has no effect on PPC440 core, because it
- * doesn't support SMP. So we can use this as software bit, like
- * DIRTY.
+ * - CACHE COHERENT bit (M) has no effect on original PPC440 cores,
+ * because it doesn't support SMP. However, some later 460 variants
+ * have -some- form of SMP support and so I keep the bit there for
+ * future use
*
* With the PPC 44x Linux implementation, the 0-11th LSBs of the PTE are used
* for memory protection related functions (see PTE structure in
@@ -436,20 +437,23 @@ extern int icache_44x_need_flush;
_PAGE_USER | _PAGE_ACCESSED | \
_PAGE_RW | _PAGE_HWWRITE | _PAGE_DIRTY | \
_PAGE_EXEC | _PAGE_HWEXEC)
+
/*
- * Note: the _PAGE_COHERENT bit automatically gets set in the hardware
- * PTE if CONFIG_SMP is defined (hash_page does this); there is no need
- * to have it in the Linux PTE, and in fact the bit could be reused for
- * another purpose. -- paulus.
+ * We define 2 sets of base prot bits, one for basic pages (ie,
+ * cacheable kernel and user pages) and one for non cacheable
+ * pages. We always set _PAGE_COHERENT when SMP is enabled or
+ * the processor might need it for DMA coherency.
*/
-
-#ifdef CONFIG_44x
-#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_GUARDED)
+#if defined(CONFIG_SMP) || defined(CONFIG_PPC_STD_MMU)
+#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_COHERENT)
#else
#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
#endif
+#define _PAGE_BASE_NC (_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_NO_CACHE)
+
#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
#define _PAGE_KERNEL (_PAGE_BASE | _PAGE_SHARED | _PAGE_WRENABLE)
+#define _PAGE_KERNEL_NC (_PAGE_BASE_NC | _PAGE_SHARED | _PAGE_WRENABLE)
#ifdef CONFIG_PPC_STD_MMU
/* On standard PPC MMU, no user access implies kernel read/write access,
@@ -459,7 +463,7 @@ extern int icache_44x_need_flush;
#define _PAGE_KERNEL_RO (_PAGE_BASE | _PAGE_SHARED)
#endif
-#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
+#define _PAGE_IO (_PAGE_KERNEL_NC | _PAGE_GUARDED)
#define _PAGE_RAM (_PAGE_KERNEL | _PAGE_HWEXEC)
#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) ||\
@@ -552,9 +556,6 @@ static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;
static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE; }
static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; }
-static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
-static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
-
static inline pte_t pte_wrprotect(pte_t pte) {
pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
static inline pte_t pte_mkclean(pte_t pte) {
@@ -693,10 +694,11 @@ static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
#endif
}
+
static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pte)
{
-#if defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP)
+#if defined(CONFIG_PTE_64BIT) && defined(CONFIG_SMP) && defined(CONFIG_DEBUG_VM)
WARN_ON(pte_present(*ptep));
#endif
__set_pte_at(mm, addr, ptep, pte);
@@ -760,16 +762,6 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
__changed; \
})
-/*
- * Macro to mark a page protection value as "uncacheable".
- */
-#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
-
-struct file;
-extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
- unsigned long size, pgprot_t vma_prot);
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-
#define __HAVE_ARCH_PTE_SAME
#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)
diff --git a/arch/powerpc/include/asm/pgtable-ppc64.h b/arch/powerpc/include/asm/pgtable-ppc64.h
index 4c0a8c62859d0f6d1560c2b575ecc85cfc219831..b0f18be81d9fbde440a17ccf52e785cfb3b7a408 100644
--- a/arch/powerpc/include/asm/pgtable-ppc64.h
+++ b/arch/powerpc/include/asm/pgtable-ppc64.h
@@ -100,7 +100,7 @@
#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY)
-/* __pgprot defined in arch/powerpc/incliude/asm/page.h */
+/* __pgprot defined in arch/powerpc/include/asm/page.h */
#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_ACCESSED)
#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_RW | _PAGE_USER)
@@ -245,9 +245,6 @@ static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED;}
static inline int pte_file(pte_t pte) { return pte_val(pte) & _PAGE_FILE;}
static inline int pte_special(pte_t pte) { return pte_val(pte) & _PAGE_SPECIAL; }
-static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
-static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
-
static inline pte_t pte_wrprotect(pte_t pte) {
pte_val(pte) &= ~(_PAGE_RW); return pte; }
static inline pte_t pte_mkclean(pte_t pte) {
@@ -405,16 +402,6 @@ static inline void __ptep_set_access_flags(pte_t *ptep, pte_t entry, int dirty)
__changed; \
})
-/*
- * Macro to mark a page protection value as "uncacheable".
- */
-#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) | _PAGE_NO_CACHE | _PAGE_GUARDED))
-
-struct file;
-extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
- unsigned long size, pgprot_t vma_prot);
-#define __HAVE_PHYS_MEM_ACCESS_PROT
-
#define __HAVE_ARCH_PTE_SAME
#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HPTEFLAGS) == 0)
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index dbb8ca172e445461a8c61bcad3a994bf62276f96..07f55e6016962c4af3c9acc34fd9b54f04f44a8b 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -16,6 +16,32 @@ struct mm_struct;
#endif
#ifndef __ASSEMBLY__
+
+/*
+ * Macro to mark a page protection value as "uncacheable".
+ */
+
+#define _PAGE_CACHE_CTL (_PAGE_COHERENT | _PAGE_GUARDED | _PAGE_NO_CACHE | \
+ _PAGE_WRITETHRU)
+
+#define pgprot_noncached(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+ _PAGE_NO_CACHE | _PAGE_GUARDED))
+
+#define pgprot_noncached_wc(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+ _PAGE_NO_CACHE))
+
+#define pgprot_cached(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+ _PAGE_COHERENT))
+
+#define pgprot_cached_wthru(prot) (__pgprot((pgprot_val(prot) & ~_PAGE_CACHE_CTL) | \
+ _PAGE_COHERENT | _PAGE_WRITETHRU))
+
+
+struct file;
+extern pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
+ unsigned long size, pgprot_t vma_prot);
+#define __HAVE_PHYS_MEM_ACCESS_PROT
+
/*
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index c4a029ccb4d31d5273cc6e43fc381e23ff6f9c08..1a0d628eb114bc0f1a6a930ee1a171c91c1eae06 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -425,14 +425,14 @@ END_FTR_SECTION_IFCLR(CPU_FTR_601)
#define fromreal(rd) tovirt(rd,rd)
#define tophys(rd,rs) \
-0: addis rd,rs,-KERNELBASE@h; \
+0: addis rd,rs,-PAGE_OFFSET@h; \
.section ".vtop_fixup","aw"; \
.align 1; \
.long 0b; \
.previous
#define tovirt(rd,rs) \
-0: addis rd,rs,KERNELBASE@h; \
+0: addis rd,rs,PAGE_OFFSET@h; \
.section ".ptov_fixup","aw"; \
.align 1; \
.long 0b; \
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 101ed87f7d844d832a7d37a41d91739ed8f0aeb1..d3466490104a557de496a0c531430948384e6264 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -69,8 +69,6 @@ extern int _prep_type;
#ifdef __KERNEL__
-extern int have_of;
-
struct task_struct;
void start_thread(struct pt_regs *regs, unsigned long fdptr, unsigned long sp);
void release_thread(struct task_struct *);
@@ -207,6 +205,11 @@ struct thread_struct {
#define INIT_SP_LIMIT \
(_ALIGN_UP(sizeof(init_thread_info), 16) + (unsigned long) &init_stack)
+#ifdef CONFIG_SPE
+#define SPEFSCR_INIT .spefscr = SPEFSCR_FINVE | SPEFSCR_FDBZE | SPEFSCR_FUNFE | SPEFSCR_FOVFE,
+#else
+#define SPEFSCR_INIT
+#endif
#ifdef CONFIG_PPC32
#define INIT_THREAD { \
@@ -215,6 +218,7 @@ struct thread_struct {
.fs = KERNEL_DS, \
.pgdir = swapper_pg_dir, \
.fpexc_mode = MSR_FE0 | MSR_FE1, \
+ SPEFSCR_INIT \
}
#else
#define INIT_THREAD { \
diff --git a/arch/powerpc/include/asm/prom.h b/arch/powerpc/include/asm/prom.h
index eb3bd2e1c7f6a6491fda0583b55befd012298eab..6ff04185d2aad679e52d4449fafd0271a101595b 100644
--- a/arch/powerpc/include/asm/prom.h
+++ b/arch/powerpc/include/asm/prom.h
@@ -253,6 +253,9 @@ extern void kdump_move_device_tree(void);
/* CPU OF node matching */
struct device_node *of_get_cpu_node(int cpu, unsigned int *thread);
+/* cache lookup */
+struct device_node *of_find_next_cache_node(struct device_node *np);
+
/* Get the MAC address */
extern const void *of_get_mac_address(struct device_node *np);
diff --git a/arch/powerpc/include/asm/ps3.h b/arch/powerpc/include/asm/ps3.h
index f9e34c493cbbcb3764a7f584296ca5809cfa60a9..cff30c0ef1fffa12d29c1497cefa4150eabe3894 100644
--- a/arch/powerpc/include/asm/ps3.h
+++ b/arch/powerpc/include/asm/ps3.h
@@ -305,30 +305,34 @@ static inline const char* ps3_result(int result)
/* system bus routines */
enum ps3_match_id {
- PS3_MATCH_ID_EHCI = 1,
- PS3_MATCH_ID_OHCI = 2,
- PS3_MATCH_ID_GELIC = 3,
- PS3_MATCH_ID_AV_SETTINGS = 4,
- PS3_MATCH_ID_SYSTEM_MANAGER = 5,
- PS3_MATCH_ID_STOR_DISK = 6,
- PS3_MATCH_ID_STOR_ROM = 7,
- PS3_MATCH_ID_STOR_FLASH = 8,
- PS3_MATCH_ID_SOUND = 9,
- PS3_MATCH_ID_GRAPHICS = 10,
- PS3_MATCH_ID_LPM = 11,
+ PS3_MATCH_ID_EHCI = 1,
+ PS3_MATCH_ID_OHCI = 2,
+ PS3_MATCH_ID_GELIC = 3,
+ PS3_MATCH_ID_AV_SETTINGS = 4,
+ PS3_MATCH_ID_SYSTEM_MANAGER = 5,
+ PS3_MATCH_ID_STOR_DISK = 6,
+ PS3_MATCH_ID_STOR_ROM = 7,
+ PS3_MATCH_ID_STOR_FLASH = 8,
+ PS3_MATCH_ID_SOUND = 9,
+ PS3_MATCH_ID_GPU = 10,
+ PS3_MATCH_ID_LPM = 11,
};
-#define PS3_MODULE_ALIAS_EHCI "ps3:1"
-#define PS3_MODULE_ALIAS_OHCI "ps3:2"
-#define PS3_MODULE_ALIAS_GELIC "ps3:3"
-#define PS3_MODULE_ALIAS_AV_SETTINGS "ps3:4"
-#define PS3_MODULE_ALIAS_SYSTEM_MANAGER "ps3:5"
-#define PS3_MODULE_ALIAS_STOR_DISK "ps3:6"
-#define PS3_MODULE_ALIAS_STOR_ROM "ps3:7"
-#define PS3_MODULE_ALIAS_STOR_FLASH "ps3:8"
-#define PS3_MODULE_ALIAS_SOUND "ps3:9"
-#define PS3_MODULE_ALIAS_GRAPHICS "ps3:10"
-#define PS3_MODULE_ALIAS_LPM "ps3:11"
+enum ps3_match_sub_id {
+ PS3_MATCH_SUB_ID_GPU_FB = 1,
+};
+
+#define PS3_MODULE_ALIAS_EHCI "ps3:1:0"
+#define PS3_MODULE_ALIAS_OHCI "ps3:2:0"
+#define PS3_MODULE_ALIAS_GELIC "ps3:3:0"
+#define PS3_MODULE_ALIAS_AV_SETTINGS "ps3:4:0"
+#define PS3_MODULE_ALIAS_SYSTEM_MANAGER "ps3:5:0"
+#define PS3_MODULE_ALIAS_STOR_DISK "ps3:6:0"
+#define PS3_MODULE_ALIAS_STOR_ROM "ps3:7:0"
+#define PS3_MODULE_ALIAS_STOR_FLASH "ps3:8:0"
+#define PS3_MODULE_ALIAS_SOUND "ps3:9:0"
+#define PS3_MODULE_ALIAS_GPU_FB "ps3:10:1"
+#define PS3_MODULE_ALIAS_LPM "ps3:11:0"
enum ps3_system_bus_device_type {
PS3_DEVICE_TYPE_IOC0 = 1,
@@ -337,11 +341,6 @@ enum ps3_system_bus_device_type {
PS3_DEVICE_TYPE_LPM,
};
-enum ps3_match_sub_id {
- /* for PS3_MATCH_ID_GRAPHICS */
- PS3_MATCH_SUB_ID_FB = 1,
-};
-
/**
* struct ps3_system_bus_device - a device on the system bus
*/
@@ -516,4 +515,7 @@ void ps3_sync_irq(int node);
u32 ps3_get_hw_thread_id(int cpu);
u64 ps3_get_spe_id(void *arg);
+/* mutex synchronizing GPU accesses and video mode changes */
+extern struct mutex ps3_gpu_mutex;
+
#endif
diff --git a/arch/powerpc/include/asm/ps3av.h b/arch/powerpc/include/asm/ps3av.h
index 5aa22cffdbd658d02c616ba822e3071ac642e3ac..cd24ac16660a2d595f7679694a7e800c92c2a7f3 100644
--- a/arch/powerpc/include/asm/ps3av.h
+++ b/arch/powerpc/include/asm/ps3av.h
@@ -740,8 +740,4 @@ extern int ps3av_audio_mute(int);
extern int ps3av_audio_mute_analog(int);
extern int ps3av_dev_open(void);
extern int ps3av_dev_close(void);
-extern void ps3av_register_flip_ctl(void (*flip_ctl)(int on, void *data),
- void *flip_data);
-extern void ps3av_flip_ctl(int on);
-
#endif /* _ASM_POWERPC_PS3AV_H_ */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index c6d1ab650778fa440d6eb79fa25a1b0a3cc779aa..f484a343efba4b8f1372f2c6a8c92af1335d6b69 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -783,6 +783,10 @@ extern void scom970_write(unsigned int address, unsigned long value);
#define __get_SP() ({unsigned long sp; \
asm volatile("mr %0,1": "=r" (sp)); sp;})
+struct pt_regs;
+
+extern void ppc_save_regs(struct pt_regs *regs);
+
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* _ASM_POWERPC_REG_H */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 8eaa7b28d9d07d59ad6d2f0a6cb83187380ec8b3..e0175beb446291d0d92f92d5f65897fb200a4472 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -168,6 +168,7 @@ extern void rtas_os_term(char *str);
extern int rtas_get_sensor(int sensor, int index, int *state);
extern int rtas_get_power_level(int powerdomain, int *level);
extern int rtas_set_power_level(int powerdomain, int level, int *setlevel);
+extern bool rtas_indicator_present(int token, int *maxindex);
extern int rtas_set_indicator(int indicator, int index, int new_value);
extern int rtas_set_indicator_fast(int indicator, int index, int new_value);
extern void rtas_progress(char *s, unsigned short hex);
diff --git a/arch/powerpc/include/asm/sfp-machine.h b/arch/powerpc/include/asm/sfp-machine.h
index ced34f1dc8f814ce0a79a691ef67297220510f40..3d9f831c3c55749829e76abf8e912cbf47af7991 100644
--- a/arch/powerpc/include/asm/sfp-machine.h
+++ b/arch/powerpc/include/asm/sfp-machine.h
@@ -82,7 +82,7 @@
#define _FP_MUL_MEAT_S(R,X,Y) _FP_MUL_MEAT_1_wide(_FP_WFRACBITS_S,R,X,Y,umul_ppmm)
#define _FP_MUL_MEAT_D(R,X,Y) _FP_MUL_MEAT_2_wide(_FP_WFRACBITS_D,R,X,Y,umul_ppmm)
-#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv(S,R,X,Y)
+#define _FP_DIV_MEAT_S(R,X,Y) _FP_DIV_MEAT_1_udiv_norm(S,R,X,Y)
#define _FP_DIV_MEAT_D(R,X,Y) _FP_DIV_MEAT_2_udiv(D,R,X,Y)
/* These macros define what NaN looks like. They're supposed to expand to
@@ -97,6 +97,20 @@
#define _FP_KEEPNANFRACP 1
+#ifdef FP_EX_BOOKE_E500_SPE
+#define FP_EX_INEXACT (1 << 21)
+#define FP_EX_INVALID (1 << 20)
+#define FP_EX_DIVZERO (1 << 19)
+#define FP_EX_UNDERFLOW (1 << 18)
+#define FP_EX_OVERFLOW (1 << 17)
+#define FP_INHIBIT_RESULTS 0
+
+#define __FPU_FPSCR (current->thread.spefscr)
+#define __FPU_ENABLED_EXC \
+({ \
+ (__FPU_FPSCR >> 2) & 0x1f; \
+})
+#else
/* Exception flags. We use the bit positions of the appropriate bits
in the FPSCR, which also correspond to the FE_* bits. This makes
everything easier ;-). */
@@ -111,22 +125,6 @@
#define FP_EX_DIVZERO (1 << (31 - 5))
#define FP_EX_INEXACT (1 << (31 - 6))
-/* This macro appears to be called when both X and Y are NaNs, and
- * has to choose one and copy it to R. i386 goes for the larger of the
- * two, sparc64 just picks Y. I don't understand this at all so I'll
- * go with sparc64 because it's shorter :-> -- PMM
- */
-#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \
- do { \
- R##_s = Y##_s; \
- _FP_FRAC_COPY_##wc(R,Y); \
- R##_c = FP_CLS_NAN; \
- } while (0)
-
-
-#include
-#include
-
#define __FPU_FPSCR (current->thread.fpscr.val)
/* We only actually write to the destination register
@@ -137,6 +135,32 @@
(__FPU_FPSCR >> 3) & 0x1f; \
})
+#endif
+
+/*
+ * If one NaN is signaling and the other is not,
+ * we choose that one, otherwise we choose X.
+ */
+#define _FP_CHOOSENAN(fs, wc, R, X, Y, OP) \
+ do { \
+ if ((_FP_FRAC_HIGH_RAW_##fs(Y) & _FP_QNANBIT_##fs) \
+ && !(_FP_FRAC_HIGH_RAW_##fs(X) & _FP_QNANBIT_##fs)) \
+ { \
+ R##_s = X##_s; \
+ _FP_FRAC_COPY_##wc(R,X); \
+ } \
+ else \
+ { \
+ R##_s = Y##_s; \
+ _FP_FRAC_COPY_##wc(R,Y); \
+ } \
+ R##_c = FP_CLS_NAN; \
+ } while (0)
+
+
+#include
+#include
+
#define __FPU_TRAP_P(bits) \
((__FPU_ENABLED_EXC & (bits)) != 0)
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index 1866cec4f9677b5fc995e754cea3ed6936d7ec57..c25f73d1d84203e0393d26d5da07e390c79417e5 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -81,6 +81,13 @@ extern int cpu_to_core_id(int cpu);
#define PPC_MSG_CALL_FUNC_SINGLE 2
#define PPC_MSG_DEBUGGER_BREAK 3
+/*
+ * irq controllers that have dedicated ipis per message and don't
+ * need additional code in the action handler may use this
+ */
+extern int smp_request_message_ipi(int virq, int message);
+extern const char *smp_ipi_name[];
+
void smp_init_iSeries(void);
void smp_init_pSeries(void);
void smp_init_cell(void);
diff --git a/arch/powerpc/include/asm/spinlock.h b/arch/powerpc/include/asm/spinlock.h
index f56a843f47058fa238ec86f844786d3b4cbe9499..36864364e601cb22b6221fb824929973a2b2e688 100644
--- a/arch/powerpc/include/asm/spinlock.h
+++ b/arch/powerpc/include/asm/spinlock.h
@@ -277,7 +277,7 @@ static inline void __raw_read_unlock(raw_rwlock_t *rw)
bne- 1b"
: "=&r"(tmp)
: "r"(&rw->lock)
- : "cr0", "memory");
+ : "cr0", "xer", "memory");
}
static inline void __raw_write_unlock(raw_rwlock_t *rw)
diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h
index 45963e80f557d2b1108781a6d381e2ab37f6ec31..28f6ddbff4cf31d6e9fa8d420563dc8228e1db5a 100644
--- a/arch/powerpc/include/asm/synch.h
+++ b/arch/powerpc/include/asm/synch.h
@@ -5,6 +5,10 @@
#include
#include
+#if defined(__powerpc64__) || defined(CONFIG_PPC_E500MC)
+#define __SUBARCH_HAS_LWSYNC
+#endif
+
#ifndef __ASSEMBLY__
extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index d6648c1433221972a6730392236dc8c3c63fe614..2a4be19a92c43275343fb5ed808667c92117bb92 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -23,15 +23,17 @@
* read_barrier_depends() prevents data-dependent loads being reordered
* across this point (nop on PPC).
*
- * We have to use the sync instructions for mb(), since lwsync doesn't
- * order loads with respect to previous stores. Lwsync is fine for
- * rmb(), though. Note that rmb() actually uses a sync on 32-bit
- * architectures.
+ * *mb() variants without smp_ prefix must order all types of memory
+ * operations with one another. sync is the only instruction sufficient
+ * to do this.
*
- * For wmb(), we use sync since wmb is used in drivers to order
- * stores to system memory with respect to writes to the device.
- * However, smp_wmb() can be a lighter-weight lwsync or eieio barrier
- * on SMP since it is only used to order updates to system memory.
+ * For the smp_ barriers, ordering is for cacheable memory operations
+ * only. We have to use the sync instruction for smp_mb(), since lwsync
+ * doesn't order loads with respect to previous stores. Lwsync can be
+ * used for smp_rmb() and smp_wmb().
+ *
+ * However, on CPUs that don't support lwsync, lwsync actually maps to a
+ * heavy-weight sync, so smp_wmb() can be a lighter-weight eieio.
*/
#define mb() __asm__ __volatile__ ("sync" : : : "memory")
#define rmb() __asm__ __volatile__ ("sync" : : : "memory")
@@ -45,14 +47,14 @@
#ifdef CONFIG_SMP
#ifdef __SUBARCH_HAS_LWSYNC
-# define SMPWMB lwsync
+# define SMPWMB LWSYNC
#else
# define SMPWMB eieio
#endif
#define smp_mb() mb()
-#define smp_rmb() rmb()
-#define smp_wmb() __asm__ __volatile__ (__stringify(SMPWMB) : : :"memory")
+#define smp_rmb() __asm__ __volatile__ (stringify_in_c(LWSYNC) : : :"memory")
+#define smp_wmb() __asm__ __volatile__ (stringify_in_c(SMPWMB) : : :"memory")
#define smp_read_barrier_depends() read_barrier_depends()
#else
#define smp_mb() barrier()
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index febd581ec9b047a01b1ff67425fef02375e34b50..27ccb764fdaba84518d5e7eadaa50ae4ed06513b 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -48,26 +48,6 @@ extern unsigned long ppc_proc_freq;
extern unsigned long ppc_tb_freq;
#define DEFAULT_TB_FREQ 125000000UL
-/*
- * By putting all of this stuff into a single struct we
- * reduce the number of cache lines touched by do_gettimeofday.
- * Both by collecting all of the data in one cache line and
- * by touching only one TOC entry on ppc64.
- */
-struct gettimeofday_vars {
- u64 tb_to_xs;
- u64 stamp_xsec;
- u64 tb_orig_stamp;
-};
-
-struct gettimeofday_struct {
- unsigned long tb_ticks_per_sec;
- struct gettimeofday_vars vars[2];
- struct gettimeofday_vars * volatile varp;
- unsigned var_idx;
- unsigned tb_to_us;
-};
-
struct div_result {
u64 result_high;
u64 result_low;
diff --git a/arch/powerpc/include/asm/tlbflush.h b/arch/powerpc/include/asm/tlbflush.h
index a2c6bfd85fb7a38ab6d002373c24afbf8648399a..abbe3419d1dd244e57d543a58f4a25bb55502da4 100644
--- a/arch/powerpc/include/asm/tlbflush.h
+++ b/arch/powerpc/include/asm/tlbflush.h
@@ -6,6 +6,9 @@
*
* - flush_tlb_mm(mm) flushes the specified mm context TLB's
* - flush_tlb_page(vma, vmaddr) flushes one page
+ * - local_flush_tlb_mm(mm) flushes the specified mm context on
+ * the local processor
+ * - local_flush_tlb_page(vma, vmaddr) flushes one page on the local processor
* - flush_tlb_page_nohash(vma, vmaddr) flushes one page if SW loaded TLB
* - flush_tlb_range(vma, start, end) flushes a range of pages
* - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
@@ -17,7 +20,7 @@
*/
#ifdef __KERNEL__
-#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE)
+#ifdef CONFIG_PPC_MMU_NOHASH
/*
* TLB flushing for software loaded TLB chips
*
@@ -28,63 +31,49 @@
#include
-extern void _tlbie(unsigned long address, unsigned int pid);
-extern void _tlbil_all(void);
-extern void _tlbil_pid(unsigned int pid);
-extern void _tlbil_va(unsigned long address, unsigned int pid);
+#define MMU_NO_CONTEXT ((unsigned int)-1)
-#if defined(CONFIG_40x) || defined(CONFIG_8xx)
-#define _tlbia() asm volatile ("tlbia; sync" : : : "memory")
-#else /* CONFIG_44x || CONFIG_FSL_BOOKE */
-extern void _tlbia(void);
-#endif
-
-static inline void flush_tlb_mm(struct mm_struct *mm)
-{
- _tlbil_pid(mm->context.id);
-}
-
-static inline void flush_tlb_page(struct vm_area_struct *vma,
- unsigned long vmaddr)
-{
- _tlbil_va(vmaddr, vma ? vma->vm_mm->context.id : 0);
-}
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
-static inline void flush_tlb_page_nohash(struct vm_area_struct *vma,
- unsigned long vmaddr)
-{
- flush_tlb_page(vma, vmaddr);
-}
+extern void local_flush_tlb_mm(struct mm_struct *mm);
+extern void local_flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
-static inline void flush_tlb_range(struct vm_area_struct *vma,
- unsigned long start, unsigned long end)
-{
- _tlbil_pid(vma->vm_mm->context.id);
-}
+#ifdef CONFIG_SMP
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
+#else
+#define flush_tlb_mm(mm) local_flush_tlb_mm(mm)
+#define flush_tlb_page(vma,addr) local_flush_tlb_page(vma,addr)
+#endif
+#define flush_tlb_page_nohash(vma,addr) flush_tlb_page(vma,addr)
-static inline void flush_tlb_kernel_range(unsigned long start,
- unsigned long end)
-{
- _tlbil_pid(0);
-}
+#elif defined(CONFIG_PPC_STD_MMU_32)
-#elif defined(CONFIG_PPC32)
/*
- * TLB flushing for "classic" hash-MMMU 32-bit CPUs, 6xx, 7xx, 7xxx
+ * TLB flushing for "classic" hash-MMU 32-bit CPUs, 6xx, 7xx, 7xxx
*/
-extern void _tlbie(unsigned long address);
-extern void _tlbia(void);
-
extern void flush_tlb_mm(struct mm_struct *mm);
extern void flush_tlb_page(struct vm_area_struct *vma, unsigned long vmaddr);
extern void flush_tlb_page_nohash(struct vm_area_struct *vma, unsigned long addr);
extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
unsigned long end);
extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+static inline void local_flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long vmaddr)
+{
+ flush_tlb_page(vma, vmaddr);
+}
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+{
+ flush_tlb_mm(mm);
+}
+
+#elif defined(CONFIG_PPC_STD_MMU_64)
-#else
/*
- * TLB flushing for 64-bit has-MMU CPUs
+ * TLB flushing for 64-bit hash-MMU CPUs
*/
#include
@@ -134,10 +123,19 @@ extern void flush_hash_page(unsigned long va, real_pte_t pte, int psize,
extern void flush_hash_range(unsigned long number, int local);
+static inline void local_flush_tlb_mm(struct mm_struct *mm)
+{
+}
+
static inline void flush_tlb_mm(struct mm_struct *mm)
{
}
+static inline void local_flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long vmaddr)
+{
+}
+
static inline void flush_tlb_page(struct vm_area_struct *vma,
unsigned long vmaddr)
{
@@ -162,7 +160,8 @@ static inline void flush_tlb_kernel_range(unsigned long start,
extern void __flush_hash_table_range(struct mm_struct *mm, unsigned long start,
unsigned long end);
-
+#else
+#error Unsupported MMU type
#endif
#endif /*__KERNEL__ */
diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h
index f01393224b52dfe66ad88ef3bedad00f49a7fca4..13c2c283e17828dee6839885cf1d89e837eed2da 100644
--- a/arch/powerpc/include/asm/vdso_datapage.h
+++ b/arch/powerpc/include/asm/vdso_datapage.h
@@ -39,6 +39,7 @@
#ifndef __ASSEMBLY__
#include
+#include
#define SYSCALL_MAP_SIZE ((__NR_syscalls + 31) / 32)
@@ -83,6 +84,7 @@ struct vdso_data {
__u32 icache_log_block_size; /* L1 i-cache log block size */
__s32 wtom_clock_sec; /* Wall to monotonic clock */
__s32 wtom_clock_nsec;
+ struct timespec stamp_xtime; /* xtime as at tb_orig_stamp */
__u32 syscall_map_64[SYSCALL_MAP_SIZE]; /* map of syscalls */
__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
};
@@ -102,6 +104,7 @@ struct vdso_data {
__u32 tz_dsttime; /* Type of dst correction 0x5C */
__s32 wtom_clock_sec; /* Wall to monotonic clock */
__s32 wtom_clock_nsec;
+ struct timespec stamp_xtime; /* xtime as at tb_orig_stamp */
__u32 syscall_map_32[SYSCALL_MAP_SIZE]; /* map of syscalls */
__u32 dcache_block_size; /* L1 d-cache block size */
__u32 icache_block_size; /* L1 i-cache block size */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index 92673b43858d067d6ccfab7a1cc083018d4a5c4f..1308a86e9070814a1680d5f40e3ec00fe2b5c637 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -17,6 +17,7 @@ ifdef CONFIG_FUNCTION_TRACER
CFLAGS_REMOVE_cputable.o = -pg -mno-sched-epilog
CFLAGS_REMOVE_prom_init.o = -pg -mno-sched-epilog
CFLAGS_REMOVE_btext.o = -pg -mno-sched-epilog
+CFLAGS_REMOVE_prom.o = -pg -mno-sched-epilog
ifdef CONFIG_DYNAMIC_FTRACE
# dynamic ftrace setup.
@@ -102,6 +103,10 @@ endif
obj-$(CONFIG_PPC64) += $(obj64-y)
+ifneq ($(CONFIG_XMON)$(CONFIG_KEXEC),)
+obj-y += ppc_save_regs.o
+endif
+
extra-$(CONFIG_PPC_FPU) += fpu.o
extra-$(CONFIG_PPC64) += entry_64.o
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index 75c5dd0138fd327a96d22d0fe46b9bac899cb610..661d07d2146bcbead9cb44e2a43aff1b5151e562 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -60,6 +60,7 @@ int main(void)
{
DEFINE(THREAD, offsetof(struct task_struct, thread));
DEFINE(MM, offsetof(struct task_struct, mm));
+ DEFINE(MMCONTEXTID, offsetof(struct mm_struct, context.id));
#ifdef CONFIG_PPC64
DEFINE(AUDITCONTEXT, offsetof(struct task_struct, audit_context));
#else
@@ -306,6 +307,7 @@ int main(void)
DEFINE(CFG_SYSCALL_MAP32, offsetof(struct vdso_data, syscall_map_32));
DEFINE(WTOM_CLOCK_SEC, offsetof(struct vdso_data, wtom_clock_sec));
DEFINE(WTOM_CLOCK_NSEC, offsetof(struct vdso_data, wtom_clock_nsec));
+ DEFINE(STAMP_XTIME, offsetof(struct vdso_data, stamp_xtime));
DEFINE(CFG_ICACHE_BLOCKSZ, offsetof(struct vdso_data, icache_block_size));
DEFINE(CFG_DCACHE_BLOCKSZ, offsetof(struct vdso_data, dcache_block_size));
DEFINE(CFG_ICACHE_LOGBLOCKSZ, offsetof(struct vdso_data, icache_log_block_size));
@@ -378,6 +380,10 @@ int main(void)
DEFINE(VCPU_FAULT_DEAR, offsetof(struct kvm_vcpu, arch.fault_dear));
DEFINE(VCPU_FAULT_ESR, offsetof(struct kvm_vcpu, arch.fault_esr));
#endif
+#ifdef CONFIG_44x
+ DEFINE(PGD_T_LOG2, PGD_T_LOG2);
+ DEFINE(PTE_T_LOG2, PTE_T_LOG2);
+#endif
return 0;
}
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index 7e8719504f39d65bf50e822289c602470f569713..923f87aff20a4522f44d1e01f487938b598604ff 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -19,6 +19,7 @@
#include
#include
#include /* for PTRRELOC on ARCH=ppc */
+#include
struct cpu_spec* cur_cpu_spec = NULL;
EXPORT_SYMBOL(cur_cpu_spec);
@@ -94,6 +95,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER3 (630)",
.cpu_features = CPU_FTRS_POWER3,
.cpu_user_features = COMMON_USER_PPC64|PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -109,6 +111,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER3 (630+)",
.cpu_features = CPU_FTRS_POWER3,
.cpu_user_features = COMMON_USER_PPC64|PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -124,6 +127,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "RS64-II (northstar)",
.cpu_features = CPU_FTRS_RS64,
.cpu_user_features = COMMON_USER_PPC64,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -139,6 +143,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "RS64-III (pulsar)",
.cpu_features = CPU_FTRS_RS64,
.cpu_user_features = COMMON_USER_PPC64,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -154,6 +159,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "RS64-III (icestar)",
.cpu_features = CPU_FTRS_RS64,
.cpu_user_features = COMMON_USER_PPC64,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -169,6 +175,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "RS64-IV (sstar)",
.cpu_features = CPU_FTRS_RS64,
.cpu_user_features = COMMON_USER_PPC64,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -184,6 +191,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER4 (gp)",
.cpu_features = CPU_FTRS_POWER4,
.cpu_user_features = COMMON_USER_POWER4,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -199,6 +207,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER4+ (gq)",
.cpu_features = CPU_FTRS_POWER4,
.cpu_user_features = COMMON_USER_POWER4,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -215,6 +224,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -233,6 +243,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -251,6 +262,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -269,6 +281,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -287,6 +300,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_PPC970,
.cpu_user_features = COMMON_USER_POWER4 |
PPC_FEATURE_HAS_ALTIVEC_COMP,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 8,
@@ -303,6 +317,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER5 (gr)",
.cpu_features = CPU_FTRS_POWER5,
.cpu_user_features = COMMON_USER_POWER5,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
@@ -323,6 +338,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER5+ (gs)",
.cpu_features = CPU_FTRS_POWER5,
.cpu_user_features = COMMON_USER_POWER5_PLUS,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
@@ -339,6 +355,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER5+ (gs)",
.cpu_features = CPU_FTRS_POWER5,
.cpu_user_features = COMMON_USER_POWER5_PLUS,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
@@ -356,6 +373,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER5+",
.cpu_features = CPU_FTRS_POWER5,
.cpu_user_features = COMMON_USER_POWER5_PLUS,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
@@ -369,6 +387,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_POWER6,
.cpu_user_features = COMMON_USER_POWER6 |
PPC_FEATURE_POWER6_EXT,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
@@ -388,6 +407,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER6 (architected)",
.cpu_features = CPU_FTRS_POWER6,
.cpu_user_features = COMMON_USER_POWER6,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
@@ -400,6 +420,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER7 (architected)",
.cpu_features = CPU_FTRS_POWER7,
.cpu_user_features = COMMON_USER_POWER7,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
@@ -412,6 +433,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER7 (raw)",
.cpu_features = CPU_FTRS_POWER7,
.cpu_user_features = COMMON_USER_POWER7,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
@@ -434,6 +456,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_user_features = COMMON_USER_PPC64 |
PPC_FEATURE_CELL | PPC_FEATURE_HAS_ALTIVEC_COMP |
PPC_FEATURE_SMT,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 4,
@@ -449,6 +472,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "PA6T",
.cpu_features = CPU_FTRS_PA6T,
.cpu_user_features = COMMON_USER_PA6T,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 64,
.dcache_bsize = 64,
.num_pmcs = 6,
@@ -466,6 +490,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "POWER4 (compatible)",
.cpu_features = CPU_FTRS_COMPATIBLE,
.cpu_user_features = COMMON_USER_PPC64,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 128,
.dcache_bsize = 128,
.num_pmcs = 6,
@@ -483,6 +508,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_PPC601,
.cpu_user_features = COMMON_USER | PPC_FEATURE_601_INSTR |
PPC_FEATURE_UNIFIED_CACHE | PPC_FEATURE_NO_TB,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_generic,
@@ -494,6 +520,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "603",
.cpu_features = CPU_FTRS_603,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = 0,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
@@ -506,6 +533,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "603e",
.cpu_features = CPU_FTRS_603,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = 0,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
@@ -518,6 +546,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "603ev",
.cpu_features = CPU_FTRS_603,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = 0,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
@@ -530,6 +559,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "604",
.cpu_features = CPU_FTRS_604,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 2,
@@ -543,6 +573,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "604e",
.cpu_features = CPU_FTRS_604,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -556,6 +587,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "604r",
.cpu_features = CPU_FTRS_604,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -569,6 +601,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "604ev",
.cpu_features = CPU_FTRS_604,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -582,6 +615,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "740/750",
.cpu_features = CPU_FTRS_740_NOTAU,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -595,6 +629,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "750CX",
.cpu_features = CPU_FTRS_750,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -608,6 +643,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "750CX",
.cpu_features = CPU_FTRS_750,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -622,6 +658,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "750CXe",
.cpu_features = CPU_FTRS_750,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -636,6 +673,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "750CXe",
.cpu_features = CPU_FTRS_750,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -650,6 +688,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "750CL",
.cpu_features = CPU_FTRS_750CL,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE | MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -664,6 +703,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "745/755",
.cpu_features = CPU_FTRS_750,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -678,6 +718,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "750FX",
.cpu_features = CPU_FTRS_750FX1,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -692,6 +733,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "750FX",
.cpu_features = CPU_FTRS_750FX2,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -706,6 +748,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "750FX",
.cpu_features = CPU_FTRS_750FX,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE | MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -720,6 +763,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "750GX",
.cpu_features = CPU_FTRS_750GX,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE | MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -734,6 +778,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "740/750",
.cpu_features = CPU_FTRS_740,
.cpu_user_features = COMMON_USER | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -749,6 +794,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_7400_NOTAU,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -764,6 +810,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_7400,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -779,6 +826,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_7400,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -794,6 +842,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_7450_20,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
@@ -811,6 +860,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_7450_21,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
@@ -828,6 +878,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_7450_23,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
@@ -845,6 +896,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_7455_1,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE | MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
@@ -862,6 +914,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_7455_20,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE | MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
@@ -879,6 +932,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_7455,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE | MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
@@ -896,6 +950,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_7447_10,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE | MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
@@ -913,6 +968,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_7447_10,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE | MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
@@ -929,6 +985,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "7447/7457",
.cpu_features = CPU_FTRS_7447,
.cpu_user_features = COMMON_USER | PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE | MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
@@ -946,6 +1003,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_7447A,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE | MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
@@ -963,6 +1021,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_7448,
.cpu_user_features = COMMON_USER |
PPC_FEATURE_HAS_ALTIVEC_COMP | PPC_FEATURE_PPC_LE,
+ .mmu_features = MMU_FTR_HPTE_TABLE | MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 6,
@@ -979,6 +1038,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "82xx",
.cpu_features = CPU_FTRS_82XX,
.cpu_user_features = COMMON_USER,
+ .mmu_features = 0,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
@@ -991,6 +1051,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "G2_LE",
.cpu_features = CPU_FTRS_G2_LE,
.cpu_user_features = COMMON_USER,
+ .mmu_features = MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
@@ -1003,6 +1064,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "e300c1",
.cpu_features = CPU_FTRS_E300,
.cpu_user_features = COMMON_USER,
+ .mmu_features = MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
@@ -1015,6 +1077,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "e300c2",
.cpu_features = CPU_FTRS_E300C2,
.cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+ .mmu_features = MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
@@ -1027,6 +1090,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "e300c3",
.cpu_features = CPU_FTRS_E300,
.cpu_user_features = COMMON_USER,
+ .mmu_features = MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
@@ -1041,6 +1105,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "e300c4",
.cpu_features = CPU_FTRS_E300,
.cpu_user_features = COMMON_USER,
+ .mmu_features = MMU_FTR_USE_HIGH_BATS,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_603,
@@ -1056,6 +1121,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "(generic PPC)",
.cpu_features = CPU_FTRS_CLASSIC32,
.cpu_user_features = COMMON_USER,
+ .mmu_features = MMU_FTR_HPTE_TABLE,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_generic,
@@ -1071,6 +1137,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
* if the 8xx code is there.... */
.cpu_features = CPU_FTRS_8XX,
.cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+ .mmu_features = MMU_FTR_TYPE_8xx,
.icache_bsize = 16,
.dcache_bsize = 16,
.platform = "ppc823",
@@ -1083,6 +1150,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "403GC",
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 16,
.dcache_bsize = 16,
.machine_check = machine_check_4xx,
@@ -1095,6 +1163,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_NO_TB,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 16,
.dcache_bsize = 16,
.machine_check = machine_check_4xx,
@@ -1106,6 +1175,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "403G ??",
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 16,
.dcache_bsize = 16,
.machine_check = machine_check_4xx,
@@ -1118,6 +1188,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1130,6 +1201,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1142,6 +1214,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1154,6 +1227,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1166,6 +1240,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1178,6 +1253,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1190,6 +1266,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1202,6 +1279,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1213,6 +1291,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "405LP",
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1225,6 +1304,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1237,6 +1317,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1249,6 +1330,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1261,6 +1343,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1273,6 +1356,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1286,6 +1370,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1298,6 +1383,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_features = CPU_FTRS_40X,
.cpu_user_features = PPC_FEATURE_32 |
PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC,
+ .mmu_features = MMU_FTR_TYPE_40x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1312,6 +1398,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440GR Rev. A",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1323,6 +1410,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440EP Rev. A",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_440ep,
@@ -1335,6 +1423,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440GR Rev. B",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1346,6 +1435,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440EP Rev. C",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_440ep,
@@ -1358,6 +1448,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440EP Rev. B",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_440ep,
@@ -1370,6 +1461,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440GRX",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_440grx,
@@ -1382,6 +1474,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440EPX",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_440epx,
@@ -1394,6 +1487,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440GP Rev. B",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1405,6 +1499,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440GP Rev. C",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1416,6 +1511,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440GX Rev. A",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_440gx,
@@ -1428,6 +1524,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440GX Rev. B",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_440gx,
@@ -1440,6 +1537,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440GX Rev. C",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_440gx,
@@ -1452,6 +1550,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440GX Rev. F",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_440gx,
@@ -1464,6 +1563,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440SP Rev. A",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1475,6 +1575,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440SPe Rev. A",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_440spe,
@@ -1487,6 +1588,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440SPe Rev. B",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_440spe,
@@ -1499,6 +1601,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "440 in Virtex-5 FXT",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_440x5,
@@ -1509,8 +1612,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
.pvr_mask = 0xffff0002,
.pvr_value = 0x13020002,
.cpu_name = "460EX",
- .cpu_features = CPU_FTRS_44X,
+ .cpu_features = CPU_FTRS_440x6,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_460ex,
@@ -1521,8 +1625,9 @@ static struct cpu_spec __initdata cpu_specs[] = {
.pvr_mask = 0xffff0002,
.pvr_value = 0x13020000,
.cpu_name = "460GT",
- .cpu_features = CPU_FTRS_44X,
+ .cpu_features = CPU_FTRS_440x6,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.cpu_setup = __setup_cpu_460gt,
@@ -1535,6 +1640,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "(generic 44x PPC)",
.cpu_features = CPU_FTRS_44X,
.cpu_user_features = COMMON_USER_BOOKE,
+ .mmu_features = MMU_FTR_TYPE_44x,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_4xx,
@@ -1551,6 +1657,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_user_features = COMMON_USER_BOOKE |
PPC_FEATURE_HAS_EFP_SINGLE |
PPC_FEATURE_UNIFIED_CACHE,
+ .mmu_features = MMU_FTR_TYPE_FSL_E,
.dcache_bsize = 32,
.machine_check = machine_check_e200,
.platform = "ppc5554",
@@ -1565,6 +1672,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
PPC_FEATURE_HAS_SPE_COMP |
PPC_FEATURE_HAS_EFP_SINGLE_COMP |
PPC_FEATURE_UNIFIED_CACHE,
+ .mmu_features = MMU_FTR_TYPE_FSL_E,
.dcache_bsize = 32,
.machine_check = machine_check_e200,
.platform = "ppc5554",
@@ -1577,6 +1685,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_user_features = COMMON_USER_BOOKE |
PPC_FEATURE_HAS_EFP_SINGLE |
PPC_FEATURE_UNIFIED_CACHE,
+ .mmu_features = MMU_FTR_TYPE_FSL_E,
.dcache_bsize = 32,
.machine_check = machine_check_e200,
.platform = "ppc5554",
@@ -1591,6 +1700,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_user_features = COMMON_USER_BOOKE |
PPC_FEATURE_HAS_SPE_COMP |
PPC_FEATURE_HAS_EFP_SINGLE_COMP,
+ .mmu_features = MMU_FTR_TYPE_FSL_E,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -1608,6 +1718,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
PPC_FEATURE_HAS_SPE_COMP |
PPC_FEATURE_HAS_EFP_SINGLE_COMP |
PPC_FEATURE_HAS_EFP_DOUBLE_COMP,
+ .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS,
.icache_bsize = 32,
.dcache_bsize = 32,
.num_pmcs = 4,
@@ -1622,6 +1733,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_name = "e500mc",
.cpu_features = CPU_FTRS_E500MC,
.cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU,
+ .mmu_features = MMU_FTR_TYPE_FSL_E | MMU_FTR_BIG_PHYS,
.icache_bsize = 64,
.dcache_bsize = 64,
.num_pmcs = 4,
@@ -1638,6 +1750,7 @@ static struct cpu_spec __initdata cpu_specs[] = {
.cpu_user_features = COMMON_USER_BOOKE |
PPC_FEATURE_HAS_SPE_COMP |
PPC_FEATURE_HAS_EFP_SINGLE_COMP,
+ .mmu_features = MMU_FTR_TYPE_FSL_E,
.icache_bsize = 32,
.dcache_bsize = 32,
.machine_check = machine_check_e500,
diff --git a/arch/powerpc/kernel/dma.c b/arch/powerpc/kernel/dma.c
index 3a6eaa876ee1169026837a52fcb119a95def9bd3..1c5c8a6fc129ff825bd1b4cb4da985e15ba85707 100644
--- a/arch/powerpc/kernel/dma.c
+++ b/arch/powerpc/kernel/dma.c
@@ -120,6 +120,26 @@ static inline void dma_direct_unmap_page(struct device *dev,
{
}
+#ifdef CONFIG_NOT_COHERENT_CACHE
+static inline void dma_direct_sync_sg(struct device *dev,
+ struct scatterlist *sgl, int nents,
+ enum dma_data_direction direction)
+{
+ struct scatterlist *sg;
+ int i;
+
+ for_each_sg(sgl, sg, nents, i)
+ __dma_sync_page(sg_page(sg), sg->offset, sg->length, direction);
+}
+
+static inline void dma_direct_sync_single_range(struct device *dev,
+ dma_addr_t dma_handle, unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ __dma_sync(bus_to_virt(dma_handle+offset), size, direction);
+}
+#endif
+
struct dma_mapping_ops dma_direct_ops = {
.alloc_coherent = dma_direct_alloc_coherent,
.free_coherent = dma_direct_free_coherent,
@@ -128,5 +148,11 @@ struct dma_mapping_ops dma_direct_ops = {
.dma_supported = dma_direct_dma_supported,
.map_page = dma_direct_map_page,
.unmap_page = dma_direct_unmap_page,
+#ifdef CONFIG_NOT_COHERENT_CACHE
+ .sync_single_range_for_cpu = dma_direct_sync_single_range,
+ .sync_single_range_for_device = dma_direct_sync_single_range,
+ .sync_sg_for_cpu = dma_direct_sync_sg,
+ .sync_sg_for_device = dma_direct_sync_sg,
+#endif
};
EXPORT_SYMBOL(dma_direct_ops);
diff --git a/arch/powerpc/kernel/entry_32.S b/arch/powerpc/kernel/entry_32.S
index 7ecc0d1855c3342d341a8b00ea9cdbd9f51d1b42..6f7eb7e00c79eb3df9c6eba5ad61087e36427015 100644
--- a/arch/powerpc/kernel/entry_32.S
+++ b/arch/powerpc/kernel/entry_32.S
@@ -1162,39 +1162,17 @@ machine_check_in_rtas:
#ifdef CONFIG_DYNAMIC_FTRACE
_GLOBAL(mcount)
_GLOBAL(_mcount)
- stwu r1,-48(r1)
- stw r3, 12(r1)
- stw r4, 16(r1)
- stw r5, 20(r1)
- stw r6, 24(r1)
- mflr r3
- stw r7, 28(r1)
- mfcr r5
- stw r8, 32(r1)
- stw r9, 36(r1)
- stw r10,40(r1)
- stw r3, 44(r1)
- stw r5, 8(r1)
- subi r3, r3, MCOUNT_INSN_SIZE
- .globl mcount_call
-mcount_call:
- bl ftrace_stub
- nop
- lwz r6, 8(r1)
- lwz r0, 44(r1)
- lwz r3, 12(r1)
+ /*
+ * It is required that _mcount on PPC32 must preserve the
+ * link register. But we have r0 to play with. We use r0
+ * to push the return address back to the caller of mcount
+ * into the ctr register, restore the link register and
+ * then jump back using the ctr register.
+ */
+ mflr r0
mtctr r0
- lwz r4, 16(r1)
- mtcr r6
- lwz r5, 20(r1)
- lwz r6, 24(r1)
- lwz r0, 52(r1)
- lwz r7, 28(r1)
- lwz r8, 32(r1)
+ lwz r0, 4(r1)
mtlr r0
- lwz r9, 36(r1)
- lwz r10,40(r1)
- addi r1, r1, 48
bctr
_GLOBAL(ftrace_caller)
diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S
index e0bcf93542867d79e20c1d5951397813535545a2..383ed6eb00850d2a7ab89b3b54b4677a3b9b1478 100644
--- a/arch/powerpc/kernel/entry_64.S
+++ b/arch/powerpc/kernel/entry_64.S
@@ -894,18 +894,6 @@ _GLOBAL(enter_prom)
#ifdef CONFIG_DYNAMIC_FTRACE
_GLOBAL(mcount)
_GLOBAL(_mcount)
- /* Taken from output of objdump from lib64/glibc */
- mflr r3
- stdu r1, -112(r1)
- std r3, 128(r1)
- subi r3, r3, MCOUNT_INSN_SIZE
- .globl mcount_call
-mcount_call:
- bl ftrace_stub
- nop
- ld r0, 128(r1)
- mtlr r0
- addi r1, r1, 112
blr
_GLOBAL(ftrace_caller)
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index f4b006ed0ab1ef183a0b0593520be182f4144c1f..5355244c99ff934abde18ce75336fe9a37689bcb 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -9,22 +9,30 @@
#include
#include
+#include
+#include
#include
#include
#include
#include
#include
+#include
#include
+#if 0
+#define DEBUGP printk
+#else
+#define DEBUGP(fmt , ...) do { } while (0)
+#endif
-static unsigned int ftrace_nop = 0x60000000;
+static unsigned int ftrace_nop = PPC_NOP_INSTR;
#ifdef CONFIG_PPC32
# define GET_ADDR(addr) addr
#else
/* PowerPC64's functions are data that points to the functions */
-# define GET_ADDR(addr) *(unsigned long *)addr
+# define GET_ADDR(addr) (*(unsigned long *)addr)
#endif
@@ -33,12 +41,12 @@ static unsigned int ftrace_calc_offset(long ip, long addr)
return (int)(addr - ip);
}
-unsigned char *ftrace_nop_replace(void)
+static unsigned char *ftrace_nop_replace(void)
{
return (char *)&ftrace_nop;
}
-unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
+static unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
{
static unsigned int op;
@@ -68,49 +76,422 @@ unsigned char *ftrace_call_replace(unsigned long ip, unsigned long addr)
# define _ASM_PTR " .long "
#endif
-int
+static int
ftrace_modify_code(unsigned long ip, unsigned char *old_code,
unsigned char *new_code)
{
- unsigned replaced;
- unsigned old = *(unsigned *)old_code;
- unsigned new = *(unsigned *)new_code;
- int faulted = 0;
+ unsigned char replaced[MCOUNT_INSN_SIZE];
/*
* Note: Due to modules and __init, code can
* disappear and change, we need to protect against faulting
- * as well as code changing.
+ * as well as code changing. We do this by using the
+ * probe_kernel_* functions.
*
* No real locking needed, this code is run through
- * kstop_machine.
+ * kstop_machine, or before SMP starts.
*/
- asm volatile (
- "1: lwz %1, 0(%2)\n"
- " cmpw %1, %5\n"
- " bne 2f\n"
- " stwu %3, 0(%2)\n"
- "2:\n"
- ".section .fixup, \"ax\"\n"
- "3: li %0, 1\n"
- " b 2b\n"
- ".previous\n"
- ".section __ex_table,\"a\"\n"
- _ASM_ALIGN "\n"
- _ASM_PTR "1b, 3b\n"
- ".previous"
- : "=r"(faulted), "=r"(replaced)
- : "r"(ip), "r"(new),
- "0"(faulted), "r"(old)
- : "memory");
-
- if (replaced != old && replaced != new)
- faulted = 2;
-
- if (!faulted)
- flush_icache_range(ip, ip + 8);
-
- return faulted;
+
+ /* read the text we want to modify */
+ if (probe_kernel_read(replaced, (void *)ip, MCOUNT_INSN_SIZE))
+ return -EFAULT;
+
+ /* Make sure it is what we expect it to be */
+ if (memcmp(replaced, old_code, MCOUNT_INSN_SIZE) != 0)
+ return -EINVAL;
+
+ /* replace the text with the new text */
+ if (probe_kernel_write((void *)ip, new_code, MCOUNT_INSN_SIZE))
+ return -EPERM;
+
+ flush_icache_range(ip, ip + 8);
+
+ return 0;
+}
+
+/*
+ * Helper functions that are the same for both PPC64 and PPC32.
+ */
+static int test_24bit_addr(unsigned long ip, unsigned long addr)
+{
+
+ /* use the create_branch to verify that this offset can be branched */
+ return create_branch((unsigned int *)ip, addr, 0);
+}
+
+static int is_bl_op(unsigned int op)
+{
+ return (op & 0xfc000003) == 0x48000001;
+}
+
+static unsigned long find_bl_target(unsigned long ip, unsigned int op)
+{
+ static int offset;
+
+ offset = (op & 0x03fffffc);
+ /* make it signed */
+ if (offset & 0x02000000)
+ offset |= 0xfe000000;
+
+ return ip + (long)offset;
+}
+
+#ifdef CONFIG_PPC64
+static int
+__ftrace_make_nop(struct module *mod,
+ struct dyn_ftrace *rec, unsigned long addr)
+{
+ unsigned int op;
+ unsigned int jmp[5];
+ unsigned long ptr;
+ unsigned long ip = rec->ip;
+ unsigned long tramp;
+ int offset;
+
+ /* read where this goes */
+ if (probe_kernel_read(&op, (void *)ip, sizeof(int)))
+ return -EFAULT;
+
+ /* Make sure that that this is still a 24bit jump */
+ if (!is_bl_op(op)) {
+ printk(KERN_ERR "Not expected bl: opcode is %x\n", op);
+ return -EINVAL;
+ }
+
+ /* lets find where the pointer goes */
+ tramp = find_bl_target(ip, op);
+
+ /*
+ * On PPC64 the trampoline looks like:
+ * 0x3d, 0x82, 0x00, 0x00, addis r12,r2,
+ * 0x39, 0x8c, 0x00, 0x00, addi r12,r12,
+ * Where the bytes 2,3,6 and 7 make up the 32bit offset
+ * to the TOC that holds the pointer.
+ * to jump to.
+ * 0xf8, 0x41, 0x00, 0x28, std r2,40(r1)
+ * 0xe9, 0x6c, 0x00, 0x20, ld r11,32(r12)
+ * The actually address is 32 bytes from the offset
+ * into the TOC.
+ * 0xe8, 0x4c, 0x00, 0x28, ld r2,40(r12)
+ */
+
+ DEBUGP("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
+
+ /* Find where the trampoline jumps to */
+ if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
+ printk(KERN_ERR "Failed to read %lx\n", tramp);
+ return -EFAULT;
+ }
+
+ DEBUGP(" %08x %08x", jmp[0], jmp[1]);
+
+ /* verify that this is what we expect it to be */
+ if (((jmp[0] & 0xffff0000) != 0x3d820000) ||
+ ((jmp[1] & 0xffff0000) != 0x398c0000) ||
+ (jmp[2] != 0xf8410028) ||
+ (jmp[3] != 0xe96c0020) ||
+ (jmp[4] != 0xe84c0028)) {
+ printk(KERN_ERR "Not a trampoline\n");
+ return -EINVAL;
+ }
+
+ offset = (unsigned)((unsigned short)jmp[0]) << 16 |
+ (unsigned)((unsigned short)jmp[1]);
+
+ DEBUGP(" %x ", offset);
+
+ /* get the address this jumps too */
+ tramp = mod->arch.toc + offset + 32;
+ DEBUGP("toc: %lx", tramp);
+
+ if (probe_kernel_read(jmp, (void *)tramp, 8)) {
+ printk(KERN_ERR "Failed to read %lx\n", tramp);
+ return -EFAULT;
+ }
+
+ DEBUGP(" %08x %08x\n", jmp[0], jmp[1]);
+
+ ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
+
+ /* This should match what was called */
+ if (ptr != GET_ADDR(addr)) {
+ printk(KERN_ERR "addr does not match %lx\n", ptr);
+ return -EINVAL;
+ }
+
+ /*
+ * We want to nop the line, but the next line is
+ * 0xe8, 0x41, 0x00, 0x28 ld r2,40(r1)
+ * This needs to be turned to a nop too.
+ */
+ if (probe_kernel_read(&op, (void *)(ip+4), MCOUNT_INSN_SIZE))
+ return -EFAULT;
+
+ if (op != 0xe8410028) {
+ printk(KERN_ERR "Next line is not ld! (%08x)\n", op);
+ return -EINVAL;
+ }
+
+ /*
+ * Milton Miller pointed out that we can not blindly do nops.
+ * If a task was preempted when calling a trace function,
+ * the nops will remove the way to restore the TOC in r2
+ * and the r2 TOC will get corrupted.
+ */
+
+ /*
+ * Replace:
+ * bl <==== will be replaced with "b 1f"
+ * ld r2,40(r1)
+ * 1:
+ */
+ op = 0x48000008; /* b +8 */
+
+ if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
+ return -EPERM;
+
+
+ flush_icache_range(ip, ip + 8);
+
+ return 0;
+}
+
+#else /* !PPC64 */
+static int
+__ftrace_make_nop(struct module *mod,
+ struct dyn_ftrace *rec, unsigned long addr)
+{
+ unsigned int op;
+ unsigned int jmp[4];
+ unsigned long ip = rec->ip;
+ unsigned long tramp;
+
+ if (probe_kernel_read(&op, (void *)ip, MCOUNT_INSN_SIZE))
+ return -EFAULT;
+
+ /* Make sure that that this is still a 24bit jump */
+ if (!is_bl_op(op)) {
+ printk(KERN_ERR "Not expected bl: opcode is %x\n", op);
+ return -EINVAL;
+ }
+
+ /* lets find where the pointer goes */
+ tramp = find_bl_target(ip, op);
+
+ /*
+ * On PPC32 the trampoline looks like:
+ * 0x3d, 0x60, 0x00, 0x00 lis r11,sym@ha
+ * 0x39, 0x6b, 0x00, 0x00 addi r11,r11,sym@l
+ * 0x7d, 0x69, 0x03, 0xa6 mtctr r11
+ * 0x4e, 0x80, 0x04, 0x20 bctr
+ */
+
+ DEBUGP("ip:%lx jumps to %lx", ip, tramp);
+
+ /* Find where the trampoline jumps to */
+ if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
+ printk(KERN_ERR "Failed to read %lx\n", tramp);
+ return -EFAULT;
+ }
+
+ DEBUGP(" %08x %08x ", jmp[0], jmp[1]);
+
+ /* verify that this is what we expect it to be */
+ if (((jmp[0] & 0xffff0000) != 0x3d600000) ||
+ ((jmp[1] & 0xffff0000) != 0x396b0000) ||
+ (jmp[2] != 0x7d6903a6) ||
+ (jmp[3] != 0x4e800420)) {
+ printk(KERN_ERR "Not a trampoline\n");
+ return -EINVAL;
+ }
+
+ tramp = (jmp[1] & 0xffff) |
+ ((jmp[0] & 0xffff) << 16);
+ if (tramp & 0x8000)
+ tramp -= 0x10000;
+
+ DEBUGP(" %x ", tramp);
+
+ if (tramp != addr) {
+ printk(KERN_ERR
+ "Trampoline location %08lx does not match addr\n",
+ tramp);
+ return -EINVAL;
+ }
+
+ op = PPC_NOP_INSTR;
+
+ if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
+ return -EPERM;
+
+ flush_icache_range(ip, ip + 8);
+
+ return 0;
+}
+#endif /* PPC64 */
+
+int ftrace_make_nop(struct module *mod,
+ struct dyn_ftrace *rec, unsigned long addr)
+{
+ unsigned char *old, *new;
+ unsigned long ip = rec->ip;
+
+ /*
+ * If the calling address is more that 24 bits away,
+ * then we had to use a trampoline to make the call.
+ * Otherwise just update the call site.
+ */
+ if (test_24bit_addr(ip, addr)) {
+ /* within range */
+ old = ftrace_call_replace(ip, addr);
+ new = ftrace_nop_replace();
+ return ftrace_modify_code(ip, old, new);
+ }
+
+ /*
+ * Out of range jumps are called from modules.
+ * We should either already have a pointer to the module
+ * or it has been passed in.
+ */
+ if (!rec->arch.mod) {
+ if (!mod) {
+ printk(KERN_ERR "No module loaded addr=%lx\n",
+ addr);
+ return -EFAULT;
+ }
+ rec->arch.mod = mod;
+ } else if (mod) {
+ if (mod != rec->arch.mod) {
+ printk(KERN_ERR
+ "Record mod %p not equal to passed in mod %p\n",
+ rec->arch.mod, mod);
+ return -EINVAL;
+ }
+ /* nothing to do if mod == rec->arch.mod */
+ } else
+ mod = rec->arch.mod;
+
+ return __ftrace_make_nop(mod, rec, addr);
+
+}
+
+#ifdef CONFIG_PPC64
+static int
+__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+ unsigned int op[2];
+ unsigned long ip = rec->ip;
+
+ /* read where this goes */
+ if (probe_kernel_read(op, (void *)ip, MCOUNT_INSN_SIZE * 2))
+ return -EFAULT;
+
+ /*
+ * It should be pointing to two nops or
+ * b +8; ld r2,40(r1)
+ */
+ if (((op[0] != 0x48000008) || (op[1] != 0xe8410028)) &&
+ ((op[0] != PPC_NOP_INSTR) || (op[1] != PPC_NOP_INSTR))) {
+ printk(KERN_ERR "Expected NOPs but have %x %x\n", op[0], op[1]);
+ return -EINVAL;
+ }
+
+ /* If we never set up a trampoline to ftrace_caller, then bail */
+ if (!rec->arch.mod->arch.tramp) {
+ printk(KERN_ERR "No ftrace trampoline\n");
+ return -EINVAL;
+ }
+
+ /* create the branch to the trampoline */
+ op[0] = create_branch((unsigned int *)ip,
+ rec->arch.mod->arch.tramp, BRANCH_SET_LINK);
+ if (!op[0]) {
+ printk(KERN_ERR "REL24 out of range!\n");
+ return -EINVAL;
+ }
+
+ /* ld r2,40(r1) */
+ op[1] = 0xe8410028;
+
+ DEBUGP("write to %lx\n", rec->ip);
+
+ if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2))
+ return -EPERM;
+
+ flush_icache_range(ip, ip + 8);
+
+ return 0;
+}
+#else
+static int
+__ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+ unsigned int op;
+ unsigned long ip = rec->ip;
+
+ /* read where this goes */
+ if (probe_kernel_read(&op, (void *)ip, MCOUNT_INSN_SIZE))
+ return -EFAULT;
+
+ /* It should be pointing to a nop */
+ if (op != PPC_NOP_INSTR) {
+ printk(KERN_ERR "Expected NOP but have %x\n", op);
+ return -EINVAL;
+ }
+
+ /* If we never set up a trampoline to ftrace_caller, then bail */
+ if (!rec->arch.mod->arch.tramp) {
+ printk(KERN_ERR "No ftrace trampoline\n");
+ return -EINVAL;
+ }
+
+ /* create the branch to the trampoline */
+ op = create_branch((unsigned int *)ip,
+ rec->arch.mod->arch.tramp, BRANCH_SET_LINK);
+ if (!op) {
+ printk(KERN_ERR "REL24 out of range!\n");
+ return -EINVAL;
+ }
+
+ DEBUGP("write to %lx\n", rec->ip);
+
+ if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
+ return -EPERM;
+
+ flush_icache_range(ip, ip + 8);
+
+ return 0;
+}
+#endif /* CONFIG_PPC64 */
+
+int ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
+{
+ unsigned char *old, *new;
+ unsigned long ip = rec->ip;
+
+ /*
+ * If the calling address is more that 24 bits away,
+ * then we had to use a trampoline to make the call.
+ * Otherwise just update the call site.
+ */
+ if (test_24bit_addr(ip, addr)) {
+ /* within range */
+ old = ftrace_nop_replace();
+ new = ftrace_call_replace(ip, addr);
+ return ftrace_modify_code(ip, old, new);
+ }
+
+ /*
+ * Out of range jumps are called from modules.
+ * Being that we are converting from nop, it had better
+ * already have a module defined.
+ */
+ if (!rec->arch.mod) {
+ printk(KERN_ERR "No module loaded\n");
+ return -EINVAL;
+ }
+
+ return __ftrace_make_call(rec, addr);
}
int ftrace_update_ftrace_func(ftrace_func_t func)
@@ -128,10 +509,10 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
int __init ftrace_dyn_arch_init(void *data)
{
- /* This is running in kstop_machine */
+ /* caller expects data to be zero */
+ unsigned long *p = data;
- ftrace_mcount_set(data);
+ *p = 0;
return 0;
}
-
diff --git a/arch/powerpc/kernel/head_32.S b/arch/powerpc/kernel/head_32.S
index 0c326823c6d4caf088663efd2c68804c6696d983..a1c4cfd25dedb0fee8e01cdddd8ba66f76f0dc88 100644
--- a/arch/powerpc/kernel/head_32.S
+++ b/arch/powerpc/kernel/head_32.S
@@ -31,6 +31,7 @@
#include
#include
#include
+#include
/* 601 only have IBAT; cr0.eq is set on 601 when using this macro */
#define LOAD_BAT(n, reg, RA, RB) \
@@ -182,7 +183,8 @@ __after_mmu_off:
bl reloc_offset
mr r26,r3
addis r4,r3,KERNELBASE@h /* current address of _start */
- cmpwi 0,r4,0 /* are we already running at 0? */
+ lis r5,PHYSICAL_START@h
+ cmplw 0,r4,r5 /* already running at PHYSICAL_START? */
bne relocate_kernel
/*
* we now have the 1st 16M of ram mapped with the bats.
@@ -810,13 +812,13 @@ giveup_altivec:
/*
* This code is jumped to from the startup code to copy
- * the kernel image to physical address 0.
+ * the kernel image to physical address PHYSICAL_START.
*/
relocate_kernel:
addis r9,r26,klimit@ha /* fetch klimit */
lwz r25,klimit@l(r9)
addis r25,r25,-KERNELBASE@h
- li r3,0 /* Destination base address */
+ lis r3,PHYSICAL_START@h /* Destination base address */
li r6,0 /* Destination offset */
li r5,0x4000 /* # bytes of memory to copy */
bl copy_and_flush /* copy the first 0x4000 bytes */
@@ -989,12 +991,12 @@ load_up_mmu:
LOAD_BAT(1,r3,r4,r5)
LOAD_BAT(2,r3,r4,r5)
LOAD_BAT(3,r3,r4,r5)
-BEGIN_FTR_SECTION
+BEGIN_MMU_FTR_SECTION
LOAD_BAT(4,r3,r4,r5)
LOAD_BAT(5,r3,r4,r5)
LOAD_BAT(6,r3,r4,r5)
LOAD_BAT(7,r3,r4,r5)
-END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
blr
/*
@@ -1070,9 +1072,14 @@ start_here:
RFI
/*
+ * void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next);
+ *
* Set up the segment registers for a new context.
*/
-_ENTRY(set_context)
+_ENTRY(switch_mmu_context)
+ lwz r3,MMCONTEXTID(r4)
+ cmpwi cr0,r3,0
+ blt- 4f
mulli r3,r3,897 /* multiply context by skew factor */
rlwinm r3,r3,4,8,27 /* VSID = (context & 0xfffff) << 4 */
addis r3,r3,0x6000 /* Set Ks, Ku bits */
@@ -1083,6 +1090,7 @@ _ENTRY(set_context)
/* Context switch the PTE pointer for the Abatron BDI2000.
* The PGDIR is passed as second argument.
*/
+ lwz r4,MM_PGD(r4)
lis r5, KERNELBASE@h
lwz r5, 0xf0(r5)
stw r4, 0x4(r5)
@@ -1098,6 +1106,9 @@ _ENTRY(set_context)
sync
isync
blr
+4: trap
+ EMIT_BUG_ENTRY 4b,__FILE__,__LINE__,0
+ blr
/*
* An undocumented "feature" of 604e requires that the v bit
@@ -1131,7 +1142,7 @@ clear_bats:
mtspr SPRN_IBAT2L,r10
mtspr SPRN_IBAT3U,r10
mtspr SPRN_IBAT3L,r10
-BEGIN_FTR_SECTION
+BEGIN_MMU_FTR_SECTION
/* Here's a tweak: at this point, CPU setup have
* not been called yet, so HIGH_BAT_EN may not be
* set in HID0 for the 745x processors. However, it
@@ -1154,7 +1165,7 @@ BEGIN_FTR_SECTION
mtspr SPRN_IBAT6L,r10
mtspr SPRN_IBAT7U,r10
mtspr SPRN_IBAT7L,r10
-END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
blr
flush_tlbs:
@@ -1178,11 +1189,11 @@ mmu_off:
/*
* Use the first pair of BAT registers to map the 1st 16MB
- * of RAM to KERNELBASE. From this point on we can't safely
+ * of RAM to PAGE_OFFSET. From this point on we can't safely
* call OF any more.
*/
initial_bats:
- lis r11,KERNELBASE@h
+ lis r11,PAGE_OFFSET@h
mfspr r9,SPRN_PVR
rlwinm r9,r9,16,16,31 /* r9 = 1 for 601, 4 for 604 */
cmpwi 0,r9,1
diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S
index f3a1ea9d7fe44d8e45371d3f9b91863277fa4756..b56fecc93a16c68f2f9b40ed18304d996c9e343e 100644
--- a/arch/powerpc/kernel/head_44x.S
+++ b/arch/powerpc/kernel/head_44x.S
@@ -68,6 +68,17 @@ _ENTRY(_start);
mr r27,r7
li r24,0 /* CPU number */
+/*
+ * In case the firmware didn't do it, we apply some workarounds
+ * that are good for all 440 core variants here
+ */
+ mfspr r3,SPRN_CCR0
+ rlwinm r3,r3,0,0,27 /* disable icache prefetch */
+ isync
+ mtspr SPRN_CCR0,r3
+ isync
+ sync
+
/*
* Set up the initial MMU state
*
@@ -391,12 +402,14 @@ interrupt_base:
rlwimi r13,r12,10,30,30
/* Load the PTE */
- rlwinm r12, r10, 13, 19, 29 /* Compute pgdir/pmd offset */
+ /* Compute pgdir/pmd offset */
+ rlwinm r12, r10, PPC44x_PGD_OFF_SHIFT, PPC44x_PGD_OFF_MASK_BIT, 29
lwzx r11, r12, r11 /* Get pgd/pmd entry */
rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */
beq 2f /* Bail if no table */
- rlwimi r12, r10, 23, 20, 28 /* Compute pte address */
+ /* Compute pte address */
+ rlwimi r12, r10, PPC44x_PTE_ADD_SHIFT, PPC44x_PTE_ADD_MASK_BIT, 28
lwz r11, 0(r12) /* Get high word of pte entry */
lwz r12, 4(r12) /* Get low word of pte entry */
@@ -485,12 +498,14 @@ tlb_44x_patch_hwater_D:
/* Make up the required permissions */
li r13,_PAGE_PRESENT | _PAGE_ACCESSED | _PAGE_HWEXEC
- rlwinm r12, r10, 13, 19, 29 /* Compute pgdir/pmd offset */
+ /* Compute pgdir/pmd offset */
+ rlwinm r12, r10, PPC44x_PGD_OFF_SHIFT, PPC44x_PGD_OFF_MASK_BIT, 29
lwzx r11, r12, r11 /* Get pgd/pmd entry */
rlwinm. r12, r11, 0, 0, 20 /* Extract pt base address */
beq 2f /* Bail if no table */
- rlwimi r12, r10, 23, 20, 28 /* Compute pte address */
+ /* Compute pte address */
+ rlwimi r12, r10, PPC44x_PTE_ADD_SHIFT, PPC44x_PTE_ADD_MASK_BIT, 28
lwz r11, 0(r12) /* Get high word of pte entry */
lwz r12, 4(r12) /* Get low word of pte entry */
@@ -554,15 +569,16 @@ tlb_44x_patch_hwater_I:
*/
finish_tlb_load:
/* Combine RPN & ERPN an write WS 0 */
- rlwimi r11,r12,0,0,19
+ rlwimi r11,r12,0,0,31-PAGE_SHIFT
tlbwe r11,r13,PPC44x_TLB_XLAT
/*
* Create WS1. This is the faulting address (EPN),
* page size, and valid flag.
*/
- li r11,PPC44x_TLB_VALID | PPC44x_TLB_4K
- rlwimi r10,r11,0,20,31 /* Insert valid and page size*/
+ li r11,PPC44x_TLB_VALID | PPC44x_TLBE_SIZE
+ /* Insert valid and page size */
+ rlwimi r10,r11,0,PPC44x_PTE_ADD_MASK_BIT,31
tlbwe r10,r13,PPC44x_TLB_PAGEID /* Write PAGEID */
/* And WS 2 */
@@ -634,12 +650,12 @@ _GLOBAL(set_context)
* goes at the beginning of the data segment, which is page-aligned.
*/
.data
- .align 12
+ .align PAGE_SHIFT
.globl sdata
sdata:
.globl empty_zero_page
empty_zero_page:
- .space 4096
+ .space PAGE_SIZE
/*
* To support >32-bit physical addresses, we use an 8KB pgdir.
diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index 590304c24dad37ea5d49f06c6176eb9ae1aab2ac..11b549acc0340909d3f5b253e73d12ec7fa3e589 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S
@@ -92,6 +92,7 @@ _ENTRY(_start);
* if needed
*/
+_ENTRY(__early_start)
/* 1. Find the index of the entry we're executing in */
bl invstr /* Find our address */
invstr: mflr r6 /* Make it accessible */
@@ -235,36 +236,40 @@ skpinv: addi r6,r6,1 /* Increment */
tlbivax 0,r9
TLBSYNC
+/* The mapping only needs to be cache-coherent on SMP */
+#ifdef CONFIG_SMP
+#define M_IF_SMP MAS2_M
+#else
+#define M_IF_SMP 0
+#endif
+
/* 6. Setup KERNELBASE mapping in TLB1[0] */
lis r6,0x1000 /* Set MAS0(TLBSEL) = TLB1(1), ESEL = 0 */
mtspr SPRN_MAS0,r6
lis r6,(MAS1_VALID|MAS1_IPROT)@h
ori r6,r6,(MAS1_TSIZE(BOOKE_PAGESZ_64M))@l
mtspr SPRN_MAS1,r6
- li r7,0
- lis r6,PAGE_OFFSET@h
- ori r6,r6,PAGE_OFFSET@l
- rlwimi r6,r7,0,20,31
+ lis r6,MAS2_VAL(PAGE_OFFSET, BOOKE_PAGESZ_64M, M_IF_SMP)@h
+ ori r6,r6,MAS2_VAL(PAGE_OFFSET, BOOKE_PAGESZ_64M, M_IF_SMP)@l
mtspr SPRN_MAS2,r6
mtspr SPRN_MAS3,r8
tlbwe
/* 7. Jump to KERNELBASE mapping */
- lis r6,KERNELBASE@h
- ori r6,r6,KERNELBASE@l
- rlwimi r6,r7,0,20,31
+ lis r6,(KERNELBASE & ~0xfff)@h
+ ori r6,r6,(KERNELBASE & ~0xfff)@l
lis r7,MSR_KERNEL@h
ori r7,r7,MSR_KERNEL@l
bl 1f /* Find our address */
1: mflr r9
rlwimi r6,r9,0,20,31
- addi r6,r6,24
+ addi r6,r6,(2f - 1b)
mtspr SPRN_SRR0,r6
mtspr SPRN_SRR1,r7
rfi /* start execution out of TLB1[0] entry */
/* 8. Clear out the temp mapping */
- lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
+2: lis r7,0x1000 /* Set MAS0(TLBSEL) = 1 */
rlwimi r7,r5,16,4,15 /* Setup MAS0 = TLBSEL | ESEL(r5) */
mtspr SPRN_MAS0,r7
tlbre
@@ -344,6 +349,15 @@ skpinv: addi r6,r6,1 /* Increment */
mtspr SPRN_DBSR,r2
#endif
+#ifdef CONFIG_SMP
+ /* Check to see if we're the second processor, and jump
+ * to the secondary_start code if so
+ */
+ mfspr r24,SPRN_PIR
+ cmpwi r24,0
+ bne __secondary_start
+#endif
+
/*
* This is where the main kernel code starts.
*/
@@ -685,12 +699,13 @@ interrupt_base:
/* SPE Floating Point Data */
#ifdef CONFIG_SPE
EXCEPTION(0x2030, SPEFloatingPointData, SPEFloatingPointException, EXC_XFER_EE);
-#else
- EXCEPTION(0x2040, SPEFloatingPointData, unknown_exception, EXC_XFER_EE)
-#endif /* CONFIG_SPE */
/* SPE Floating Point Round */
+ EXCEPTION(0x2050, SPEFloatingPointRound, SPEFloatingPointRoundException, EXC_XFER_EE)
+#else
+ EXCEPTION(0x2040, SPEFloatingPointData, unknown_exception, EXC_XFER_EE)
EXCEPTION(0x2050, SPEFloatingPointRound, unknown_exception, EXC_XFER_EE)
+#endif /* CONFIG_SPE */
/* Performance Monitor */
EXCEPTION(0x2060, PerformanceMonitor, performance_monitor_exception, EXC_XFER_STD)
@@ -734,6 +749,9 @@ finish_tlb_load:
rlwimi r12, r11, 26, 24, 31 /* extract ...WIMGE from pte */
#else
rlwimi r12, r11, 26, 27, 31 /* extract WIMGE from pte */
+#endif
+#ifdef CONFIG_SMP
+ ori r12, r12, MAS2_M
#endif
mtspr SPRN_MAS2, r12
@@ -746,15 +764,15 @@ finish_tlb_load:
iseleq r12, r12, r10
#ifdef CONFIG_PTE_64BIT
-2: rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */
+ rlwimi r12, r13, 24, 0, 7 /* grab RPN[32:39] */
rlwimi r12, r11, 24, 8, 19 /* grab RPN[40:51] */
mtspr SPRN_MAS3, r12
-BEGIN_FTR_SECTION
+BEGIN_MMU_FTR_SECTION
srwi r10, r13, 8 /* grab RPN[8:31] */
mtspr SPRN_MAS7, r10
-END_FTR_SECTION_IFSET(CPU_FTR_BIG_PHYS)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_BIG_PHYS)
#else
-2: rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */
+ rlwimi r11, r12, 0, 20, 31 /* Extract RPN from PTE and merge with perms */
mtspr SPRN_MAS3, r11
#endif
#ifdef CONFIG_E200
@@ -1037,6 +1055,63 @@ _GLOBAL(flush_dcache_L1)
blr
+#ifdef CONFIG_SMP
+/* When we get here, r24 needs to hold the CPU # */
+ .globl __secondary_start
+__secondary_start:
+ lis r3,__secondary_hold_acknowledge@h
+ ori r3,r3,__secondary_hold_acknowledge@l
+ stw r24,0(r3)
+
+ li r3,0
+ mr r4,r24 /* Why? */
+ bl call_setup_cpu
+
+ lis r3,tlbcam_index@ha
+ lwz r3,tlbcam_index@l(r3)
+ mtctr r3
+ li r26,0 /* r26 safe? */
+
+ /* Load each CAM entry */
+1: mr r3,r26
+ bl loadcam_entry
+ addi r26,r26,1
+ bdnz 1b
+
+ /* get current_thread_info and current */
+ lis r1,secondary_ti@ha
+ lwz r1,secondary_ti@l(r1)
+ lwz r2,TI_TASK(r1)
+
+ /* stack */
+ addi r1,r1,THREAD_SIZE-STACK_FRAME_OVERHEAD
+ li r0,0
+ stw r0,0(r1)
+
+ /* ptr to current thread */
+ addi r4,r2,THREAD /* address of our thread_struct */
+ mtspr SPRN_SPRG3,r4
+
+ /* Setup the defaults for TLB entries */
+ li r4,(MAS4_TSIZED(BOOKE_PAGESZ_4K))@l
+ mtspr SPRN_MAS4,r4
+
+ /* Jump to start_secondary */
+ lis r4,MSR_KERNEL@h
+ ori r4,r4,MSR_KERNEL@l
+ lis r3,start_secondary@h
+ ori r3,r3,start_secondary@l
+ mtspr SPRN_SRR0,r3
+ mtspr SPRN_SRR1,r4
+ sync
+ rfi
+ sync
+
+ .globl __secondary_hold_acknowledge
+__secondary_hold_acknowledge:
+ .long -1
+#endif
+
/*
* We put a few things here that have to be page-aligned. This stuff
* goes at the beginning of the data segment, which is page-aligned.
diff --git a/arch/powerpc/kernel/ibmebus.c b/arch/powerpc/kernel/ibmebus.c
index 64299d28f36485d3441e0b59604228e141712cb1..6e3f62493659abc79e68f6795f14dd3d52d8cab1 100644
--- a/arch/powerpc/kernel/ibmebus.c
+++ b/arch/powerpc/kernel/ibmebus.c
@@ -47,7 +47,7 @@
#include
static struct device ibmebus_bus_device = { /* fake "parent" device */
- .bus_id = "ibmebus",
+ .init_name = "ibmebus",
};
struct bus_type ibmebus_bus_type;
@@ -231,6 +231,7 @@ void ibmebus_free_irq(u32 ist, void *dev_id)
unsigned int irq = irq_find_mapping(NULL, ist);
free_irq(irq, dev_id);
+ irq_dispose_mapping(irq);
}
EXPORT_SYMBOL(ibmebus_free_irq);
diff --git a/arch/powerpc/kernel/idle.c b/arch/powerpc/kernel/idle.c
index 31982d05d81a8814d73dfc8b5a562cd90b66e5d3..88d9c1d5e5fb0aea1e74757ae9ac1133e9f352ef 100644
--- a/arch/powerpc/kernel/idle.c
+++ b/arch/powerpc/kernel/idle.c
@@ -69,10 +69,15 @@ void cpu_idle(void)
smp_mb();
local_irq_disable();
+ /* Don't trace irqs off for idle */
+ stop_critical_timings();
+
/* check again after disabling irqs */
if (!need_resched() && !cpu_should_die())
ppc_md.power_save();
+ start_critical_timings();
+
local_irq_enable();
set_thread_flag(TIF_POLLING_NRFLAG);
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index ac2a21f45c757a41f8ab639abca5a449d6576207..b3abebb7ee64641420fd81fd796b5c13282dccbf 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -13,13 +13,17 @@
#include
#include
#include
+#include
#include
#include
+#include
void machine_crash_shutdown(struct pt_regs *regs)
{
if (ppc_md.machine_crash_shutdown)
ppc_md.machine_crash_shutdown(regs);
+ else
+ default_machine_crash_shutdown(regs);
}
/*
@@ -31,11 +35,8 @@ int machine_kexec_prepare(struct kimage *image)
{
if (ppc_md.machine_kexec_prepare)
return ppc_md.machine_kexec_prepare(image);
- /*
- * Fail if platform doesn't provide its own machine_kexec_prepare
- * implementation.
- */
- return -ENOSYS;
+ else
+ return default_machine_kexec_prepare(image);
}
void machine_kexec_cleanup(struct kimage *image)
@@ -52,13 +53,11 @@ void machine_kexec(struct kimage *image)
{
if (ppc_md.machine_kexec)
ppc_md.machine_kexec(image);
- else {
- /*
- * Fall back to normal restart if platform doesn't provide
- * its own kexec function, and user insist to kexec...
- */
- machine_restart(NULL);
- }
+ else
+ default_machine_kexec(image);
+
+ /* Fall back to normal restart if we're still alive. */
+ machine_restart(NULL);
for(;;);
}
@@ -118,3 +117,71 @@ int overlaps_crashkernel(unsigned long start, unsigned long size)
{
return (start + size) > crashk_res.start && start <= crashk_res.end;
}
+
+/* Values we need to export to the second kernel via the device tree. */
+static unsigned long kernel_end;
+static unsigned long crashk_size;
+
+static struct property kernel_end_prop = {
+ .name = "linux,kernel-end",
+ .length = sizeof(unsigned long),
+ .value = &kernel_end,
+};
+
+static struct property crashk_base_prop = {
+ .name = "linux,crashkernel-base",
+ .length = sizeof(unsigned long),
+ .value = &crashk_res.start,
+};
+
+static struct property crashk_size_prop = {
+ .name = "linux,crashkernel-size",
+ .length = sizeof(unsigned long),
+ .value = &crashk_size,
+};
+
+static void __init export_crashk_values(struct device_node *node)
+{
+ struct property *prop;
+
+ /* There might be existing crash kernel properties, but we can't
+ * be sure what's in them, so remove them. */
+ prop = of_find_property(node, "linux,crashkernel-base", NULL);
+ if (prop)
+ prom_remove_property(node, prop);
+
+ prop = of_find_property(node, "linux,crashkernel-size", NULL);
+ if (prop)
+ prom_remove_property(node, prop);
+
+ if (crashk_res.start != 0) {
+ prom_add_property(node, &crashk_base_prop);
+ crashk_size = crashk_res.end - crashk_res.start + 1;
+ prom_add_property(node, &crashk_size_prop);
+ }
+}
+
+static int __init kexec_setup(void)
+{
+ struct device_node *node;
+ struct property *prop;
+
+ node = of_find_node_by_path("/chosen");
+ if (!node)
+ return -ENOENT;
+
+ /* remove any stale properties so ours can be found */
+ prop = of_find_property(node, kernel_end_prop.name, NULL);
+ if (prop)
+ prom_remove_property(node, prop);
+
+ /* information needed by userspace when using default_machine_kexec */
+ kernel_end = __pa(_end);
+ prom_add_property(node, &kernel_end_prop);
+
+ export_crashk_values(node);
+
+ of_node_put(node);
+ return 0;
+}
+late_initcall(kexec_setup);
diff --git a/arch/powerpc/kernel/machine_kexec_64.c b/arch/powerpc/kernel/machine_kexec_64.c
index 3c4ca046e854c9e88ab587c1672eae97b2c69c4a..49e705fcee6df804545dd790b6cd0dc7fb6d7ada 100644
--- a/arch/powerpc/kernel/machine_kexec_64.c
+++ b/arch/powerpc/kernel/machine_kexec_64.c
@@ -289,7 +289,7 @@ void default_machine_kexec(struct kimage *image)
}
/* Values we need to export to the second kernel via the device tree. */
-static unsigned long htab_base, kernel_end;
+static unsigned long htab_base;
static struct property htab_base_prop = {
.name = "linux,htab-base",
@@ -303,25 +303,20 @@ static struct property htab_size_prop = {
.value = &htab_size_bytes,
};
-static struct property kernel_end_prop = {
- .name = "linux,kernel-end",
- .length = sizeof(unsigned long),
- .value = &kernel_end,
-};
-
-static void __init export_htab_values(void)
+static int __init export_htab_values(void)
{
struct device_node *node;
struct property *prop;
+ /* On machines with no htab htab_address is NULL */
+ if (!htab_address)
+ return -ENODEV;
+
node = of_find_node_by_path("/chosen");
if (!node)
- return;
+ return -ENODEV;
/* remove any stale propertys so ours can be found */
- prop = of_find_property(node, kernel_end_prop.name, NULL);
- if (prop)
- prom_remove_property(node, prop);
prop = of_find_property(node, htab_base_prop.name, NULL);
if (prop)
prom_remove_property(node, prop);
@@ -329,68 +324,11 @@ static void __init export_htab_values(void)
if (prop)
prom_remove_property(node, prop);
- /* information needed by userspace when using default_machine_kexec */
- kernel_end = __pa(_end);
- prom_add_property(node, &kernel_end_prop);
-
- /* On machines with no htab htab_address is NULL */
- if (NULL == htab_address)
- goto out;
-
htab_base = __pa(htab_address);
prom_add_property(node, &htab_base_prop);
prom_add_property(node, &htab_size_prop);
- out:
- of_node_put(node);
-}
-
-static struct property crashk_base_prop = {
- .name = "linux,crashkernel-base",
- .length = sizeof(unsigned long),
- .value = &crashk_res.start,
-};
-
-static unsigned long crashk_size;
-
-static struct property crashk_size_prop = {
- .name = "linux,crashkernel-size",
- .length = sizeof(unsigned long),
- .value = &crashk_size,
-};
-
-static void __init export_crashk_values(void)
-{
- struct device_node *node;
- struct property *prop;
-
- node = of_find_node_by_path("/chosen");
- if (!node)
- return;
-
- /* There might be existing crash kernel properties, but we can't
- * be sure what's in them, so remove them. */
- prop = of_find_property(node, "linux,crashkernel-base", NULL);
- if (prop)
- prom_remove_property(node, prop);
-
- prop = of_find_property(node, "linux,crashkernel-size", NULL);
- if (prop)
- prom_remove_property(node, prop);
-
- if (crashk_res.start != 0) {
- prom_add_property(node, &crashk_base_prop);
- crashk_size = crashk_res.end - crashk_res.start + 1;
- prom_add_property(node, &crashk_size_prop);
- }
-
of_node_put(node);
-}
-
-static int __init kexec_setup(void)
-{
- export_htab_values();
- export_crashk_values();
return 0;
}
-__initcall(kexec_setup);
+late_initcall(export_htab_values);
diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S
index 5c33bc14bd9fe161a75d7c12bc6809e77cba5a93..15f28e0de78dae1919c3cf55f6ec77f15f71d9b5 100644
--- a/arch/powerpc/kernel/misc_32.S
+++ b/arch/powerpc/kernel/misc_32.S
@@ -29,6 +29,7 @@
#include
#include
#include
+#include
.text
@@ -271,231 +272,6 @@ _GLOBAL(real_writeb)
#endif /* CONFIG_40x */
-/*
- * Flush MMU TLB
- */
-#ifndef CONFIG_FSL_BOOKE
-_GLOBAL(_tlbil_all)
-_GLOBAL(_tlbil_pid)
-#endif
-_GLOBAL(_tlbia)
-#if defined(CONFIG_40x)
- sync /* Flush to memory before changing mapping */
- tlbia
- isync /* Flush shadow TLB */
-#elif defined(CONFIG_44x)
- li r3,0
- sync
-
- /* Load high watermark */
- lis r4,tlb_44x_hwater@ha
- lwz r5,tlb_44x_hwater@l(r4)
-
-1: tlbwe r3,r3,PPC44x_TLB_PAGEID
- addi r3,r3,1
- cmpw 0,r3,r5
- ble 1b
-
- isync
-#elif defined(CONFIG_FSL_BOOKE)
- /* Invalidate all entries in TLB0 */
- li r3, 0x04
- tlbivax 0,3
- /* Invalidate all entries in TLB1 */
- li r3, 0x0c
- tlbivax 0,3
- msync
-#ifdef CONFIG_SMP
- tlbsync
-#endif /* CONFIG_SMP */
-#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */
-#if defined(CONFIG_SMP)
- rlwinm r8,r1,0,0,(31-THREAD_SHIFT)
- lwz r8,TI_CPU(r8)
- oris r8,r8,10
- mfmsr r10
- SYNC
- rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */
- rlwinm r0,r0,0,28,26 /* clear DR */
- mtmsr r0
- SYNC_601
- isync
- lis r9,mmu_hash_lock@h
- ori r9,r9,mmu_hash_lock@l
- tophys(r9,r9)
-10: lwarx r7,0,r9
- cmpwi 0,r7,0
- bne- 10b
- stwcx. r8,0,r9
- bne- 10b
- sync
- tlbia
- sync
- TLBSYNC
- li r0,0
- stw r0,0(r9) /* clear mmu_hash_lock */
- mtmsr r10
- SYNC_601
- isync
-#else /* CONFIG_SMP */
- sync
- tlbia
- sync
-#endif /* CONFIG_SMP */
-#endif /* ! defined(CONFIG_40x) */
- blr
-
-/*
- * Flush MMU TLB for a particular address
- */
-#ifndef CONFIG_FSL_BOOKE
-_GLOBAL(_tlbil_va)
-#endif
-_GLOBAL(_tlbie)
-#if defined(CONFIG_40x)
- /* We run the search with interrupts disabled because we have to change
- * the PID and I don't want to preempt when that happens.
- */
- mfmsr r5
- mfspr r6,SPRN_PID
- wrteei 0
- mtspr SPRN_PID,r4
- tlbsx. r3, 0, r3
- mtspr SPRN_PID,r6
- wrtee r5
- bne 10f
- sync
- /* There are only 64 TLB entries, so r3 < 64, which means bit 25 is clear.
- * Since 25 is the V bit in the TLB_TAG, loading this value will invalidate
- * the TLB entry. */
- tlbwe r3, r3, TLB_TAG
- isync
-10:
-
-#elif defined(CONFIG_44x)
- mfspr r5,SPRN_MMUCR
- rlwimi r5,r4,0,24,31 /* Set TID */
-
- /* We have to run the search with interrupts disabled, even critical
- * and debug interrupts (in fact the only critical exceptions we have
- * are debug and machine check). Otherwise an interrupt which causes
- * a TLB miss can clobber the MMUCR between the mtspr and the tlbsx. */
- mfmsr r4
- lis r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@ha
- addi r6,r6,(MSR_EE|MSR_CE|MSR_ME|MSR_DE)@l
- andc r6,r4,r6
- mtmsr r6
- mtspr SPRN_MMUCR,r5
- tlbsx. r3, 0, r3
- mtmsr r4
- bne 10f
- sync
- /* There are only 64 TLB entries, so r3 < 64,
- * which means bit 22, is clear. Since 22 is
- * the V bit in the TLB_PAGEID, loading this
- * value will invalidate the TLB entry.
- */
- tlbwe r3, r3, PPC44x_TLB_PAGEID
- isync
-10:
-#elif defined(CONFIG_FSL_BOOKE)
- rlwinm r4, r3, 0, 0, 19
- ori r5, r4, 0x08 /* TLBSEL = 1 */
- tlbivax 0, r4
- tlbivax 0, r5
- msync
-#if defined(CONFIG_SMP)
- tlbsync
-#endif /* CONFIG_SMP */
-#else /* !(CONFIG_40x || CONFIG_44x || CONFIG_FSL_BOOKE) */
-#if defined(CONFIG_SMP)
- rlwinm r8,r1,0,0,(31-THREAD_SHIFT)
- lwz r8,TI_CPU(r8)
- oris r8,r8,11
- mfmsr r10
- SYNC
- rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */
- rlwinm r0,r0,0,28,26 /* clear DR */
- mtmsr r0
- SYNC_601
- isync
- lis r9,mmu_hash_lock@h
- ori r9,r9,mmu_hash_lock@l
- tophys(r9,r9)
-10: lwarx r7,0,r9
- cmpwi 0,r7,0
- bne- 10b
- stwcx. r8,0,r9
- bne- 10b
- eieio
- tlbie r3
- sync
- TLBSYNC
- li r0,0
- stw r0,0(r9) /* clear mmu_hash_lock */
- mtmsr r10
- SYNC_601
- isync
-#else /* CONFIG_SMP */
- tlbie r3
- sync
-#endif /* CONFIG_SMP */
-#endif /* ! CONFIG_40x */
- blr
-
-#if defined(CONFIG_FSL_BOOKE)
-/*
- * Flush MMU TLB, but only on the local processor (no broadcast)
- */
-_GLOBAL(_tlbil_all)
-#define MMUCSR0_TLBFI (MMUCSR0_TLB0FI | MMUCSR0_TLB1FI | \
- MMUCSR0_TLB2FI | MMUCSR0_TLB3FI)
- li r3,(MMUCSR0_TLBFI)@l
- mtspr SPRN_MMUCSR0, r3
-1:
- mfspr r3,SPRN_MMUCSR0
- andi. r3,r3,MMUCSR0_TLBFI@l
- bne 1b
- blr
-
-/*
- * Flush MMU TLB for a particular process id, but only on the local processor
- * (no broadcast)
- */
-_GLOBAL(_tlbil_pid)
-/* we currently do an invalidate all since we don't have per pid invalidate */
- li r3,(MMUCSR0_TLBFI)@l
- mtspr SPRN_MMUCSR0, r3
-1:
- mfspr r3,SPRN_MMUCSR0
- andi. r3,r3,MMUCSR0_TLBFI@l
- bne 1b
- msync
- isync
- blr
-
-/*
- * Flush MMU TLB for a particular address, but only on the local processor
- * (no broadcast)
- */
-_GLOBAL(_tlbil_va)
- mfmsr r10
- wrteei 0
- slwi r4,r4,16
- mtspr SPRN_MAS6,r4 /* assume AS=0 for now */
- tlbsx 0,r3
- mfspr r4,SPRN_MAS1 /* check valid */
- andis. r3,r4,MAS1_VALID@h
- beq 1f
- rlwinm r4,r4,0,1,31
- mtspr SPRN_MAS1,r4
- tlbwe
- msync
- isync
-1: wrtee r10
- blr
-#endif /* CONFIG_FSL_BOOKE */
-
/*
* Flush instruction cache.
@@ -650,8 +426,8 @@ _GLOBAL(__flush_dcache_icache)
BEGIN_FTR_SECTION
blr
END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
- rlwinm r3,r3,0,0,19 /* Get page base address */
- li r4,4096/L1_CACHE_BYTES /* Number of lines in a page */
+ rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */
+ li r4,PAGE_SIZE/L1_CACHE_BYTES /* Number of lines in a page */
mtctr r4
mr r6,r3
0: dcbst 0,r3 /* Write line to ram */
@@ -691,8 +467,8 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
rlwinm r0,r10,0,28,26 /* clear DR */
mtmsr r0
isync
- rlwinm r3,r3,0,0,19 /* Get page base address */
- li r4,4096/L1_CACHE_BYTES /* Number of lines in a page */
+ rlwinm r3,r3,0,0,31-PAGE_SHIFT /* Get page base address */
+ li r4,PAGE_SIZE/L1_CACHE_BYTES /* Number of lines in a page */
mtctr r4
mr r6,r3
0: dcbst 0,r3 /* Write line to ram */
@@ -716,7 +492,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_COHERENT_ICACHE)
* void clear_pages(void *page, int order) ;
*/
_GLOBAL(clear_pages)
- li r0,4096/L1_CACHE_BYTES
+ li r0,PAGE_SIZE/L1_CACHE_BYTES
slw r0,r0,r4
mtctr r0
#ifdef CONFIG_8xx
@@ -774,7 +550,7 @@ _GLOBAL(copy_page)
dcbt r5,r4
li r11,L1_CACHE_BYTES+4
#endif /* MAX_COPY_PREFETCH */
- li r0,4096/L1_CACHE_BYTES - MAX_COPY_PREFETCH
+ li r0,PAGE_SIZE/L1_CACHE_BYTES - MAX_COPY_PREFETCH
crclr 4*cr0+eq
2:
mtctr r0
diff --git a/arch/powerpc/kernel/module.c b/arch/powerpc/kernel/module.c
index 7ff292475269f10fb1e1e4ad85270587c4756d15..43e7e3a7f130220bdd56122c1560d42484a6db80 100644
--- a/arch/powerpc/kernel/module.c
+++ b/arch/powerpc/kernel/module.c
@@ -78,6 +78,12 @@ int module_finalize(const Elf_Ehdr *hdr,
(void *)sect->sh_addr,
(void *)sect->sh_addr + sect->sh_size);
+ sect = find_section(hdr, sechdrs, "__mmu_ftr_fixup");
+ if (sect != NULL)
+ do_feature_fixups(cur_cpu_spec->mmu_features,
+ (void *)sect->sh_addr,
+ (void *)sect->sh_addr + sect->sh_size);
+
#ifdef CONFIG_PPC64
sect = find_section(hdr, sechdrs, "__fw_ftr_fixup");
if (sect != NULL)
diff --git a/arch/powerpc/kernel/module_32.c b/arch/powerpc/kernel/module_32.c
index 2df91a03462a26109d49b9fc82b852df76c14b34..f832773fc28e940f82ed0dcecc6104d5e6e71939 100644
--- a/arch/powerpc/kernel/module_32.c
+++ b/arch/powerpc/kernel/module_32.c
@@ -22,6 +22,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -53,6 +54,9 @@ static unsigned int count_relocs(const Elf32_Rela *rela, unsigned int num)
r_addend = rela[i].r_addend;
}
+#ifdef CONFIG_DYNAMIC_FTRACE
+ _count_relocs++; /* add one for ftrace_caller */
+#endif
return _count_relocs;
}
@@ -306,5 +310,11 @@ int apply_relocate_add(Elf32_Shdr *sechdrs,
return -ENOEXEC;
}
}
+#ifdef CONFIG_DYNAMIC_FTRACE
+ module->arch.tramp =
+ do_plt_call(module->module_core,
+ (unsigned long)ftrace_caller,
+ sechdrs, module);
+#endif
return 0;
}
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 1af2377e49929dc367d49b4588fd2ba6d23d7e91..8992b031a7b6a6cc54433453b6b991d1610cb5d6 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -20,6 +20,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -163,6 +164,11 @@ static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,
}
}
+#ifdef CONFIG_DYNAMIC_FTRACE
+ /* make the trampoline to the ftrace_caller */
+ relocs++;
+#endif
+
DEBUGP("Looks like a total of %lu stubs, max\n", relocs);
return relocs * sizeof(struct ppc64_stub_entry);
}
@@ -441,5 +447,12 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
}
}
+#ifdef CONFIG_DYNAMIC_FTRACE
+ me->arch.toc = my_r2(sechdrs, me);
+ me->arch.tramp = stub_for_addr(sechdrs,
+ (unsigned long)ftrace_caller,
+ me);
+#endif
+
return 0;
}
diff --git a/arch/powerpc/kernel/of_device.c b/arch/powerpc/kernel/of_device.c
index f3c9cae01dd5d76389b1c2ce8779c14cb8e6f086..fa983a59c4ce1084d939da4ea6fce17d91036f2a 100644
--- a/arch/powerpc/kernel/of_device.c
+++ b/arch/powerpc/kernel/of_device.c
@@ -14,7 +14,6 @@ static void of_device_make_bus_id(struct of_device *dev)
{
static atomic_t bus_no_reg_magic;
struct device_node *node = dev->node;
- char *name = dev->dev.bus_id;
const u32 *reg;
u64 addr;
int magic;
@@ -27,14 +26,12 @@ static void of_device_make_bus_id(struct of_device *dev)
reg = of_get_property(node, "dcr-reg", NULL);
if (reg) {
#ifdef CONFIG_PPC_DCR_NATIVE
- snprintf(name, BUS_ID_SIZE, "d%x.%s",
- *reg, node->name);
+ dev_set_name(&dev->dev, "d%x.%s", *reg, node->name);
#else /* CONFIG_PPC_DCR_NATIVE */
addr = of_translate_dcr_address(node, *reg, NULL);
if (addr != OF_BAD_ADDR) {
- snprintf(name, BUS_ID_SIZE,
- "D%llx.%s", (unsigned long long)addr,
- node->name);
+ dev_set_name(&dev->dev, "D%llx.%s",
+ (unsigned long long)addr, node->name);
return;
}
#endif /* !CONFIG_PPC_DCR_NATIVE */
@@ -48,9 +45,8 @@ static void of_device_make_bus_id(struct of_device *dev)
if (reg) {
addr = of_translate_address(node, reg);
if (addr != OF_BAD_ADDR) {
- snprintf(name, BUS_ID_SIZE,
- "%llx.%s", (unsigned long long)addr,
- node->name);
+ dev_set_name(&dev->dev, "%llx.%s",
+ (unsigned long long)addr, node->name);
return;
}
}
@@ -60,7 +56,7 @@ static void of_device_make_bus_id(struct of_device *dev)
* counter (and pray...)
*/
magic = atomic_add_return(1, &bus_no_reg_magic);
- snprintf(name, BUS_ID_SIZE, "%s.%d", node->name, magic - 1);
+ dev_set_name(&dev->dev, "%s.%d", node->name, magic - 1);
}
struct of_device *of_device_alloc(struct device_node *np,
@@ -80,7 +76,7 @@ struct of_device *of_device_alloc(struct device_node *np,
dev->dev.archdata.of_node = np;
if (bus_id)
- strlcpy(dev->dev.bus_id, bus_id, BUS_ID_SIZE);
+ dev_set_name(&dev->dev, bus_id);
else
of_device_make_bus_id(dev);
diff --git a/arch/powerpc/kernel/paca.c b/arch/powerpc/kernel/paca.c
index 48a347133f41607c84a05e4b26647f17e4b6829c..c744b327bcabc866230198eda4dce37169ad0151 100644
--- a/arch/powerpc/kernel/paca.c
+++ b/arch/powerpc/kernel/paca.c
@@ -37,6 +37,7 @@ struct lppaca lppaca[] = {
.end_of_quantum = 0xfffffffffffffffful,
.slb_count = 64,
.vmxregs_in_use = 0,
+ .page_ins = 0,
},
};
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index f36936d9fda32f903880c3362c2fa051e42f08f1..2538030954d85102c3ac929b076ad3979d98a4c1 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -37,13 +37,7 @@
#include
#include
#include
-
-#ifdef DEBUG
-#include
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG(fmt...)
-#endif
+#include
static DEFINE_SPINLOCK(hose_spinlock);
@@ -53,8 +47,9 @@ static int global_phb_number; /* Global phb counter */
/* ISA Memory physical address */
resource_size_t isa_mem_base;
-/* Default PCI flags is 0 */
-unsigned int ppc_pci_flags;
+/* Default PCI flags is 0 on ppc32, modified at boot on ppc64 */
+unsigned int ppc_pci_flags = 0;
+
static struct dma_mapping_ops *pci_dma_ops;
@@ -165,8 +160,6 @@ EXPORT_SYMBOL(pci_domain_nr);
*/
struct pci_controller* pci_find_hose_for_OF_device(struct device_node* node)
{
- if (!have_of)
- return NULL;
while(node) {
struct pci_controller *hose, *tmp;
list_for_each_entry_safe(hose, tmp, &hose_list, list_node)
@@ -208,26 +201,6 @@ char __devinit *pcibios_setup(char *str)
return str;
}
-void __devinit pcibios_setup_new_device(struct pci_dev *dev)
-{
- struct dev_archdata *sd = &dev->dev.archdata;
-
- sd->of_node = pci_device_to_OF_node(dev);
-
- DBG("PCI: device %s OF node: %s\n", pci_name(dev),
- sd->of_node ? sd->of_node->full_name : "");
-
- sd->dma_ops = pci_dma_ops;
-#ifdef CONFIG_PPC32
- sd->dma_data = (void *)PCI_DRAM_OFFSET;
-#endif
- set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
-
- if (ppc_md.pci_dma_dev_setup)
- ppc_md.pci_dma_dev_setup(dev);
-}
-EXPORT_SYMBOL(pcibios_setup_new_device);
-
/*
* Reads the interrupt pin to determine if interrupt is use by card.
* If the interrupt is used, then gets the interrupt line from the
@@ -252,7 +225,7 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
return -1;
#endif
- DBG("Try to map irq for %s...\n", pci_name(pci_dev));
+ pr_debug("PCI: Try to map irq for %s...\n", pci_name(pci_dev));
#ifdef DEBUG
memset(&oirq, 0xff, sizeof(oirq));
@@ -276,26 +249,26 @@ int pci_read_irq_line(struct pci_dev *pci_dev)
line == 0xff || line == 0) {
return -1;
}
- DBG(" -> no map ! Using line %d (pin %d) from PCI config\n",
- line, pin);
+ pr_debug(" No map ! Using line %d (pin %d) from PCI config\n",
+ line, pin);
virq = irq_create_mapping(NULL, line);
if (virq != NO_IRQ)
set_irq_type(virq, IRQ_TYPE_LEVEL_LOW);
} else {
- DBG(" -> got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
- oirq.size, oirq.specifier[0], oirq.specifier[1],
+ pr_debug(" Got one, spec %d cells (0x%08x 0x%08x...) on %s\n",
+ oirq.size, oirq.specifier[0], oirq.specifier[1],
oirq.controller->full_name);
virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
oirq.size);
}
if(virq == NO_IRQ) {
- DBG(" -> failed to map !\n");
+ pr_debug(" Failed to map !\n");
return -1;
}
- DBG(" -> mapped to linux irq %d\n", virq);
+ pr_debug(" Mapped to linux irq %d\n", virq);
pci_dev->irq = virq;
@@ -397,13 +370,10 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
}
/* XXX would be nice to have a way to ask for write-through */
- prot |= _PAGE_NO_CACHE;
if (write_combine)
- prot &= ~_PAGE_GUARDED;
+ return pgprot_noncached_wc(prot);
else
- prot |= _PAGE_GUARDED;
-
- return __pgprot(prot);
+ return pgprot_noncached(prot);
}
/*
@@ -414,19 +384,17 @@ static pgprot_t __pci_mmap_set_pgprot(struct pci_dev *dev, struct resource *rp,
pgprot_t pci_phys_mem_access_prot(struct file *file,
unsigned long pfn,
unsigned long size,
- pgprot_t protection)
+ pgprot_t prot)
{
struct pci_dev *pdev = NULL;
struct resource *found = NULL;
- unsigned long prot = pgprot_val(protection);
resource_size_t offset = ((resource_size_t)pfn) << PAGE_SHIFT;
int i;
if (page_is_ram(pfn))
- return __pgprot(prot);
-
- prot |= _PAGE_NO_CACHE | _PAGE_GUARDED;
+ return prot;
+ prot = pgprot_noncached(prot);
for_each_pci_dev(pdev) {
for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
struct resource *rp = &pdev->resource[i];
@@ -447,14 +415,14 @@ pgprot_t pci_phys_mem_access_prot(struct file *file,
}
if (found) {
if (found->flags & IORESOURCE_PREFETCH)
- prot &= ~_PAGE_GUARDED;
+ prot = pgprot_noncached_wc(prot);
pci_dev_put(pdev);
}
- DBG("non-PCI map for %llx, prot: %lx\n",
- (unsigned long long)offset, prot);
+ pr_debug("PCI: Non-PCI map for %llx, prot: %lx\n",
+ (unsigned long long)offset, pgprot_val(prot));
- return __pgprot(prot);
+ return prot;
}
@@ -610,8 +578,7 @@ int pci_mmap_legacy_page_range(struct pci_bus *bus,
pr_debug(" -> mapping phys %llx\n", (unsigned long long)offset);
vma->vm_pgoff = offset >> PAGE_SHIFT;
- vma->vm_page_prot = __pgprot(pgprot_val(vma->vm_page_prot)
- | _PAGE_NO_CACHE | _PAGE_GUARDED);
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
return remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff,
vma->vm_end - vma->vm_start,
vma->vm_page_prot);
@@ -853,15 +820,12 @@ void __devinit pci_process_bridge_OF_ranges(struct pci_controller *hose,
int pci_proc_domain(struct pci_bus *bus)
{
struct pci_controller *hose = pci_bus_to_host(bus);
-#ifdef CONFIG_PPC64
- return hose->buid != 0;
-#else
+
if (!(ppc_pci_flags & PPC_PCI_ENABLE_PROC_DOMAINS))
return 0;
if (ppc_pci_flags & PPC_PCI_COMPAT_DOMAIN_0)
return hose->global_number != 0;
return 1;
-#endif
}
void pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
@@ -1083,27 +1047,50 @@ static void __devinit pcibios_fixup_bridge(struct pci_bus *bus)
}
}
-static void __devinit __pcibios_fixup_bus(struct pci_bus *bus)
+void __devinit pcibios_setup_bus_self(struct pci_bus *bus)
{
- struct pci_dev *dev = bus->self;
-
- pr_debug("PCI: Fixup bus %d (%s)\n", bus->number, dev ? pci_name(dev) : "PHB");
-
- /* Fixup PCI<->PCI bridges. Host bridges are handled separately, for
- * now differently between 32 and 64 bits.
- */
- if (dev != NULL)
+ /* Fix up the bus resources for P2P bridges */
+ if (bus->self != NULL)
pcibios_fixup_bridge(bus);
- /* Additional setup that is different between 32 and 64 bits for now */
- pcibios_do_bus_setup(bus);
-
- /* Platform specific bus fixups */
+ /* Platform specific bus fixups. This is currently only used
+ * by fsl_pci and I'm hoping to get rid of it at some point
+ */
if (ppc_md.pcibios_fixup_bus)
ppc_md.pcibios_fixup_bus(bus);
- /* Read default IRQs and fixup if necessary */
+ /* Setup bus DMA mappings */
+ if (ppc_md.pci_dma_bus_setup)
+ ppc_md.pci_dma_bus_setup(bus);
+}
+
+void __devinit pcibios_setup_bus_devices(struct pci_bus *bus)
+{
+ struct pci_dev *dev;
+
+ pr_debug("PCI: Fixup bus devices %d (%s)\n",
+ bus->number, bus->self ? pci_name(bus->self) : "PHB");
+
list_for_each_entry(dev, &bus->devices, bus_list) {
+ struct dev_archdata *sd = &dev->dev.archdata;
+
+ /* Setup OF node pointer in archdata */
+ sd->of_node = pci_device_to_OF_node(dev);
+
+ /* Fixup NUMA node as it may not be setup yet by the generic
+ * code and is needed by the DMA init
+ */
+ set_dev_node(&dev->dev, pcibus_to_node(dev->bus));
+
+ /* Hook up default DMA ops */
+ sd->dma_ops = pci_dma_ops;
+ sd->dma_data = (void *)PCI_DRAM_OFFSET;
+
+ /* Additional platform DMA/iommu setup */
+ if (ppc_md.pci_dma_dev_setup)
+ ppc_md.pci_dma_dev_setup(dev);
+
+ /* Read default IRQs and fixup if necessary */
pci_read_irq_line(dev);
if (ppc_md.pci_irq_fixup)
ppc_md.pci_irq_fixup(dev);
@@ -1113,22 +1100,19 @@ static void __devinit __pcibios_fixup_bus(struct pci_bus *bus)
void __devinit pcibios_fixup_bus(struct pci_bus *bus)
{
/* When called from the generic PCI probe, read PCI<->PCI bridge
- * bases before proceeding
+ * bases. This is -not- called when generating the PCI tree from
+ * the OF device-tree.
*/
if (bus->self != NULL)
pci_read_bridge_bases(bus);
- __pcibios_fixup_bus(bus);
-}
-EXPORT_SYMBOL(pcibios_fixup_bus);
-/* When building a bus from the OF tree rather than probing, we need a
- * slightly different version of the fixup which doesn't read the
- * bridge bases using config space accesses
- */
-void __devinit pcibios_fixup_of_probed_bus(struct pci_bus *bus)
-{
- __pcibios_fixup_bus(bus);
+ /* Now fixup the bus bus */
+ pcibios_setup_bus_self(bus);
+
+ /* Now fixup devices on that bus */
+ pcibios_setup_bus_devices(bus);
}
+EXPORT_SYMBOL(pcibios_fixup_bus);
static int skip_isa_ioresource_align(struct pci_dev *dev)
{
@@ -1198,10 +1182,10 @@ static int __init reparent_resources(struct resource *parent,
*pp = NULL;
for (p = res->child; p != NULL; p = p->sibling) {
p->parent = res;
- DBG(KERN_INFO "PCI: reparented %s [%llx..%llx] under %s\n",
- p->name,
- (unsigned long long)p->start,
- (unsigned long long)p->end, res->name);
+ pr_debug("PCI: Reparented %s [%llx..%llx] under %s\n",
+ p->name,
+ (unsigned long long)p->start,
+ (unsigned long long)p->end, res->name);
}
return 0;
}
@@ -1245,9 +1229,12 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
int i;
struct resource *res, *pr;
+ pr_debug("PCI: Allocating bus resources for %04x:%02x...\n",
+ pci_domain_nr(bus), bus->number);
+
for (i = 0; i < PCI_BUS_NUM_RESOURCES; ++i) {
if ((res = bus->resource[i]) == NULL || !res->flags
- || res->start > res->end)
+ || res->start > res->end || res->parent)
continue;
if (bus->parent == NULL)
pr = (res->flags & IORESOURCE_IO) ?
@@ -1271,14 +1258,14 @@ void pcibios_allocate_bus_resources(struct pci_bus *bus)
}
}
- DBG("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
- "[0x%x], parent %p (%s)\n",
- bus->self ? pci_name(bus->self) : "PHB",
- bus->number, i,
- (unsigned long long)res->start,
- (unsigned long long)res->end,
- (unsigned int)res->flags,
- pr, (pr && pr->name) ? pr->name : "nil");
+ pr_debug("PCI: %s (bus %d) bridge rsrc %d: %016llx-%016llx "
+ "[0x%x], parent %p (%s)\n",
+ bus->self ? pci_name(bus->self) : "PHB",
+ bus->number, i,
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned int)res->flags,
+ pr, (pr && pr->name) ? pr->name : "nil");
if (pr && !(pr->flags & IORESOURCE_UNSET)) {
if (request_resource(pr, res) == 0)
@@ -1305,11 +1292,11 @@ static inline void __devinit alloc_resource(struct pci_dev *dev, int idx)
{
struct resource *pr, *r = &dev->resource[idx];
- DBG("PCI: Allocating %s: Resource %d: %016llx..%016llx [%x]\n",
- pci_name(dev), idx,
- (unsigned long long)r->start,
- (unsigned long long)r->end,
- (unsigned int)r->flags);
+ pr_debug("PCI: Allocating %s: Resource %d: %016llx..%016llx [%x]\n",
+ pci_name(dev), idx,
+ (unsigned long long)r->start,
+ (unsigned long long)r->end,
+ (unsigned int)r->flags);
pr = pci_find_parent_resource(dev, r);
if (!pr || (pr->flags & IORESOURCE_UNSET) ||
@@ -1317,10 +1304,11 @@ static inline void __devinit alloc_resource(struct pci_dev *dev, int idx)
printk(KERN_WARNING "PCI: Cannot allocate resource region %d"
" of device %s, will remap\n", idx, pci_name(dev));
if (pr)
- DBG("PCI: parent is %p: %016llx-%016llx [%x]\n", pr,
- (unsigned long long)pr->start,
- (unsigned long long)pr->end,
- (unsigned int)pr->flags);
+ pr_debug("PCI: parent is %p: %016llx-%016llx [%x]\n",
+ pr,
+ (unsigned long long)pr->start,
+ (unsigned long long)pr->end,
+ (unsigned int)pr->flags);
/* We'll assign a new address later */
r->flags |= IORESOURCE_UNSET;
r->end -= r->start;
@@ -1358,7 +1346,8 @@ static void __init pcibios_allocate_resources(int pass)
* but keep it unregistered.
*/
u32 reg;
- DBG("PCI: Switching off ROM of %s\n", pci_name(dev));
+ pr_debug("PCI: Switching off ROM of %s\n",
+ pci_name(dev));
r->flags &= ~IORESOURCE_ROM_ENABLE;
pci_read_config_dword(dev, dev->rom_base_reg, ®);
pci_write_config_dword(dev, dev->rom_base_reg,
@@ -1383,7 +1372,7 @@ void __init pcibios_resource_survey(void)
}
if (!(ppc_pci_flags & PPC_PCI_PROBE_ONLY)) {
- DBG("PCI: Assigning unassigned resouces...\n");
+ pr_debug("PCI: Assigning unassigned resouces...\n");
pci_assign_unassigned_resources();
}
@@ -1393,9 +1382,11 @@ void __init pcibios_resource_survey(void)
}
#ifdef CONFIG_HOTPLUG
-/* This is used by the pSeries hotplug driver to allocate resource
+
+/* This is used by the PCI hotplug driver to allocate resource
* of newly plugged busses. We can try to consolidate with the
- * rest of the code later, for now, keep it as-is
+ * rest of the code later, for now, keep it as-is as our main
+ * resource allocation function doesn't deal with sub-trees yet.
*/
void __devinit pcibios_claim_one_bus(struct pci_bus *bus)
{
@@ -1410,6 +1401,14 @@ void __devinit pcibios_claim_one_bus(struct pci_bus *bus)
if (r->parent || !r->start || !r->flags)
continue;
+
+ pr_debug("PCI: Claiming %s: "
+ "Resource %d: %016llx..%016llx [%x]\n",
+ pci_name(dev), i,
+ (unsigned long long)r->start,
+ (unsigned long long)r->end,
+ (unsigned int)r->flags);
+
pci_claim_resource(dev, i);
}
}
@@ -1418,6 +1417,31 @@ void __devinit pcibios_claim_one_bus(struct pci_bus *bus)
pcibios_claim_one_bus(child_bus);
}
EXPORT_SYMBOL_GPL(pcibios_claim_one_bus);
+
+
+/* pcibios_finish_adding_to_bus
+ *
+ * This is to be called by the hotplug code after devices have been
+ * added to a bus, this include calling it for a PHB that is just
+ * being added
+ */
+void pcibios_finish_adding_to_bus(struct pci_bus *bus)
+{
+ pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n",
+ pci_domain_nr(bus), bus->number);
+
+ /* Allocate bus and devices resources */
+ pcibios_allocate_bus_resources(bus);
+ pcibios_claim_one_bus(bus);
+
+ /* Add new devices to global lists. Register in proc, sysfs. */
+ pci_bus_add_devices(bus);
+
+ /* Fixup EEH */
+ eeh_add_device_tree_late(bus);
+}
+EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus);
+
#endif /* CONFIG_HOTPLUG */
int pcibios_enable_device(struct pci_dev *dev, int mask)
@@ -1428,3 +1452,61 @@ int pcibios_enable_device(struct pci_dev *dev, int mask)
return pci_enable_resources(dev, mask);
}
+
+void __devinit pcibios_setup_phb_resources(struct pci_controller *hose)
+{
+ struct pci_bus *bus = hose->bus;
+ struct resource *res;
+ int i;
+
+ /* Hookup PHB IO resource */
+ bus->resource[0] = res = &hose->io_resource;
+
+ if (!res->flags) {
+ printk(KERN_WARNING "PCI: I/O resource not set for host"
+ " bridge %s (domain %d)\n",
+ hose->dn->full_name, hose->global_number);
+#ifdef CONFIG_PPC32
+ /* Workaround for lack of IO resource only on 32-bit */
+ res->start = (unsigned long)hose->io_base_virt - isa_io_base;
+ res->end = res->start + IO_SPACE_LIMIT;
+ res->flags = IORESOURCE_IO;
+#endif /* CONFIG_PPC32 */
+ }
+
+ pr_debug("PCI: PHB IO resource = %016llx-%016llx [%lx]\n",
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned long)res->flags);
+
+ /* Hookup PHB Memory resources */
+ for (i = 0; i < 3; ++i) {
+ res = &hose->mem_resources[i];
+ if (!res->flags) {
+ if (i > 0)
+ continue;
+ printk(KERN_ERR "PCI: Memory resource 0 not set for "
+ "host bridge %s (domain %d)\n",
+ hose->dn->full_name, hose->global_number);
+#ifdef CONFIG_PPC32
+ /* Workaround for lack of MEM resource only on 32-bit */
+ res->start = hose->pci_mem_offset;
+ res->end = (resource_size_t)-1LL;
+ res->flags = IORESOURCE_MEM;
+#endif /* CONFIG_PPC32 */
+ }
+ bus->resource[i+1] = res;
+
+ pr_debug("PCI: PHB MEM resource %d = %016llx-%016llx [%lx]\n", i,
+ (unsigned long long)res->start,
+ (unsigned long long)res->end,
+ (unsigned long)res->flags);
+ }
+
+ pr_debug("PCI: PHB MEM offset = %016llx\n",
+ (unsigned long long)hose->pci_mem_offset);
+ pr_debug("PCI: PHB IO offset = %08lx\n",
+ (unsigned long)hose->io_base_virt - _IO_BASE);
+
+}
+
diff --git a/arch/powerpc/kernel/pci_32.c b/arch/powerpc/kernel/pci_32.c
index 131b1dfa68c6993ff32006ae1cf22a7f0386211f..132cd80afa21575fe1ee52db1a4afb68083afe99 100644
--- a/arch/powerpc/kernel/pci_32.c
+++ b/arch/powerpc/kernel/pci_32.c
@@ -26,12 +26,6 @@
#undef DEBUG
-#ifdef DEBUG
-#define DBG(x...) printk(x)
-#else
-#define DBG(x...)
-#endif
-
unsigned long isa_io_base = 0;
unsigned long pci_dram_offset = 0;
int pcibios_assign_bus_offset = 1;
@@ -272,17 +266,14 @@ pci_busdev_to_OF_node(struct pci_bus *bus, int devfn)
{
struct device_node *parent, *np;
- if (!have_of)
- return NULL;
-
- DBG("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn);
+ pr_debug("pci_busdev_to_OF_node(%d,0x%x)\n", bus->number, devfn);
parent = scan_OF_for_pci_bus(bus);
if (parent == NULL)
return NULL;
- DBG(" parent is %s\n", parent ? parent->full_name : "");
+ pr_debug(" parent is %s\n", parent ? parent->full_name : "");
np = scan_OF_for_pci_dev(parent, devfn);
of_node_put(parent);
- DBG(" result is %s\n", np ? np->full_name : "");
+ pr_debug(" result is %s\n", np ? np->full_name : "");
/* XXX most callers don't release the returned node
* mostly because ppc64 doesn't increase the refcount,
@@ -315,8 +306,6 @@ pci_device_from_OF_node(struct device_node* node, u8* bus, u8* devfn)
struct pci_controller* hose;
struct pci_dev* dev = NULL;
- if (!have_of)
- return -ENODEV;
/* Make sure it's really a PCI device */
hose = pci_find_hose_for_OF_device(node);
if (!hose || !hose->dn)
@@ -379,10 +368,41 @@ void pcibios_make_OF_bus_map(void)
}
#endif /* CONFIG_PPC_OF */
+static void __devinit pcibios_scan_phb(struct pci_controller *hose)
+{
+ struct pci_bus *bus;
+ struct device_node *node = hose->dn;
+ unsigned long io_offset;
+ struct resource *res = &hose->io_resource;
+
+ pr_debug("PCI: Scanning PHB %s\n",
+ node ? node->full_name : "");
+
+ /* Create an empty bus for the toplevel */
+ bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, hose);
+ if (bus == NULL) {
+ printk(KERN_ERR "Failed to create bus for PCI domain %04x\n",
+ hose->global_number);
+ return;
+ }
+ bus->secondary = hose->first_busno;
+ hose->bus = bus;
+
+ /* Fixup IO space offset */
+ io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
+ res->start = (res->start + io_offset) & 0xffffffffu;
+ res->end = (res->end + io_offset) & 0xffffffffu;
+
+ /* Wire up PHB bus resources */
+ pcibios_setup_phb_resources(hose);
+
+ /* Scan children */
+ hose->last_busno = bus->subordinate = pci_scan_child_bus(bus);
+}
+
static int __init pcibios_init(void)
{
struct pci_controller *hose, *tmp;
- struct pci_bus *bus;
int next_busno = 0;
printk(KERN_INFO "PCI: Probing PCI hardware\n");
@@ -395,12 +415,8 @@ static int __init pcibios_init(void)
if (pci_assign_all_buses)
hose->first_busno = next_busno;
hose->last_busno = 0xff;
- bus = pci_scan_bus_parented(hose->parent, hose->first_busno,
- hose->ops, hose);
- if (bus) {
- pci_bus_add_devices(bus);
- hose->last_busno = bus->subordinate;
- }
+ pcibios_scan_phb(hose);
+ pci_bus_add_devices(hose->bus);
if (pci_assign_all_buses || next_busno <= hose->last_busno)
next_busno = hose->last_busno + pcibios_assign_bus_offset;
}
@@ -410,7 +426,7 @@ static int __init pcibios_init(void)
* numbers vs. kernel bus numbers since we may have to
* remap them.
*/
- if (pci_assign_all_buses && have_of)
+ if (pci_assign_all_buses)
pcibios_make_OF_bus_map();
/* Call common code to handle resource allocation */
@@ -425,54 +441,6 @@ static int __init pcibios_init(void)
subsys_initcall(pcibios_init);
-void __devinit pcibios_do_bus_setup(struct pci_bus *bus)
-{
- struct pci_controller *hose = (struct pci_controller *) bus->sysdata;
- unsigned long io_offset;
- struct resource *res;
- int i;
- struct pci_dev *dev;
-
- /* Hookup PHB resources */
- io_offset = (unsigned long)hose->io_base_virt - isa_io_base;
- if (bus->parent == NULL) {
- /* This is a host bridge - fill in its resources */
- hose->bus = bus;
-
- bus->resource[0] = res = &hose->io_resource;
- if (!res->flags) {
- if (io_offset)
- printk(KERN_ERR "I/O resource not set for host"
- " bridge %d\n", hose->global_number);
- res->start = 0;
- res->end = IO_SPACE_LIMIT;
- res->flags = IORESOURCE_IO;
- }
- res->start = (res->start + io_offset) & 0xffffffffu;
- res->end = (res->end + io_offset) & 0xffffffffu;
-
- for (i = 0; i < 3; ++i) {
- res = &hose->mem_resources[i];
- if (!res->flags) {
- if (i > 0)
- continue;
- printk(KERN_ERR "Memory resource not set for "
- "host bridge %d\n", hose->global_number);
- res->start = hose->pci_mem_offset;
- res->end = ~0U;
- res->flags = IORESOURCE_MEM;
- }
- bus->resource[i+1] = res;
- }
- }
-
- if (ppc_md.pci_dma_bus_setup)
- ppc_md.pci_dma_bus_setup(bus);
-
- list_for_each_entry(dev, &bus->devices, bus_list)
- pcibios_setup_new_device(dev);
-}
-
/* the next one is stolen from the alpha port... */
void __init
pcibios_update_irq(struct pci_dev *dev, int irq)
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index 3502b9101e6baa7e924806ef6bb284a1aca604c5..39fadc6e149219771985bfc1d697a47afe27f885 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -32,13 +32,6 @@
#include
#include
-#ifdef DEBUG
-#include
-#define DBG(fmt...) printk(fmt)
-#else
-#define DBG(fmt...)
-#endif
-
unsigned long pci_probe_only = 1;
/* pci_io_base -- the base address from which io bars are offsets.
@@ -102,7 +95,7 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
addrs = of_get_property(node, "assigned-addresses", &proplen);
if (!addrs)
return;
- DBG(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
+ pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
for (; proplen >= 20; proplen -= 20, addrs += 5) {
flags = pci_parse_of_flags(addrs[0]);
if (!flags)
@@ -112,8 +105,9 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
if (!size)
continue;
i = addrs[0] & 0xff;
- DBG(" base: %llx, size: %llx, i: %x\n",
- (unsigned long long)base, (unsigned long long)size, i);
+ pr_debug(" base: %llx, size: %llx, i: %x\n",
+ (unsigned long long)base,
+ (unsigned long long)size, i);
if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
@@ -144,7 +138,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
if (type == NULL)
type = "";
- DBG(" create device, devfn: %x, type: %s\n", devfn, type);
+ pr_debug(" create device, devfn: %x, type: %s\n", devfn, type);
dev->bus = bus;
dev->sysdata = node;
@@ -165,8 +159,8 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
dev->class = get_int_prop(node, "class-code", 0);
dev->revision = get_int_prop(node, "revision-id", 0);
- DBG(" class: 0x%x\n", dev->class);
- DBG(" revision: 0x%x\n", dev->revision);
+ pr_debug(" class: 0x%x\n", dev->class);
+ pr_debug(" revision: 0x%x\n", dev->revision);
dev->current_state = 4; /* unknown power state */
dev->error_state = pci_channel_io_normal;
@@ -187,7 +181,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
pci_parse_of_addrs(node, dev);
- DBG(" adding to system ...\n");
+ pr_debug(" adding to system ...\n");
pci_device_add(dev, bus);
@@ -195,19 +189,20 @@ struct pci_dev *of_create_pci_dev(struct device_node *node,
}
EXPORT_SYMBOL(of_create_pci_dev);
-void __devinit of_scan_bus(struct device_node *node,
- struct pci_bus *bus)
+static void __devinit __of_scan_bus(struct device_node *node,
+ struct pci_bus *bus, int rescan_existing)
{
struct device_node *child;
const u32 *reg;
int reglen, devfn;
struct pci_dev *dev;
- DBG("of_scan_bus(%s) bus no %d... \n", node->full_name, bus->number);
+ pr_debug("of_scan_bus(%s) bus no %d... \n",
+ node->full_name, bus->number);
/* Scan direct children */
for_each_child_of_node(node, child) {
- DBG(" * %s\n", child->full_name);
+ pr_debug(" * %s\n", child->full_name);
reg = of_get_property(child, "reg", ®len);
if (reg == NULL || reglen < 20)
continue;
@@ -217,11 +212,15 @@ void __devinit of_scan_bus(struct device_node *node,
dev = of_create_pci_dev(child, bus, devfn);
if (!dev)
continue;
- DBG(" dev header type: %x\n", dev->hdr_type);
+ pr_debug(" dev header type: %x\n", dev->hdr_type);
}
- /* Ally all fixups */
- pcibios_fixup_of_probed_bus(bus);
+ /* Apply all fixups necessary. We don't fixup the bus "self"
+ * for an existing bridge that is being rescanned
+ */
+ if (!rescan_existing)
+ pcibios_setup_bus_self(bus);
+ pcibios_setup_bus_devices(bus);
/* Now scan child busses */
list_for_each_entry(dev, &bus->devices, bus_list) {
@@ -233,7 +232,20 @@ void __devinit of_scan_bus(struct device_node *node,
}
}
}
-EXPORT_SYMBOL(of_scan_bus);
+
+void __devinit of_scan_bus(struct device_node *node,
+ struct pci_bus *bus)
+{
+ __of_scan_bus(node, bus, 0);
+}
+EXPORT_SYMBOL_GPL(of_scan_bus);
+
+void __devinit of_rescan_bus(struct device_node *node,
+ struct pci_bus *bus)
+{
+ __of_scan_bus(node, bus, 1);
+}
+EXPORT_SYMBOL_GPL(of_rescan_bus);
void __devinit of_scan_pci_bridge(struct device_node *node,
struct pci_dev *dev)
@@ -245,7 +257,7 @@ void __devinit of_scan_pci_bridge(struct device_node *node,
unsigned int flags;
u64 size;
- DBG("of_scan_pci_bridge(%s)\n", node->full_name);
+ pr_debug("of_scan_pci_bridge(%s)\n", node->full_name);
/* parse bus-range property */
busrange = of_get_property(node, "bus-range", &len);
@@ -309,12 +321,12 @@ void __devinit of_scan_pci_bridge(struct device_node *node,
}
sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
bus->number);
- DBG(" bus name: %s\n", bus->name);
+ pr_debug(" bus name: %s\n", bus->name);
mode = PCI_PROBE_NORMAL;
if (ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
- DBG(" probe mode: %d\n", mode);
+ pr_debug(" probe mode: %d\n", mode);
if (mode == PCI_PROBE_DEVTREE)
of_scan_bus(node, bus);
@@ -327,9 +339,10 @@ void __devinit scan_phb(struct pci_controller *hose)
{
struct pci_bus *bus;
struct device_node *node = hose->dn;
- int i, mode;
+ int mode;
- DBG("PCI: Scanning PHB %s\n", node ? node->full_name : "");
+ pr_debug("PCI: Scanning PHB %s\n",
+ node ? node->full_name : "");
/* Create an empty bus for the toplevel */
bus = pci_create_bus(hose->parent, hose->first_busno, hose->ops, node);
@@ -345,26 +358,13 @@ void __devinit scan_phb(struct pci_controller *hose)
pcibios_map_io_space(bus);
/* Wire up PHB bus resources */
- DBG("PCI: PHB IO resource = %016lx-%016lx [%lx]\n",
- hose->io_resource.start, hose->io_resource.end,
- hose->io_resource.flags);
- bus->resource[0] = &hose->io_resource;
- for (i = 0; i < 3; ++i) {
- DBG("PCI: PHB MEM resource %d = %016lx-%016lx [%lx]\n", i,
- hose->mem_resources[i].start,
- hose->mem_resources[i].end,
- hose->mem_resources[i].flags);
- bus->resource[i+1] = &hose->mem_resources[i];
- }
- DBG("PCI: PHB MEM offset = %016lx\n", hose->pci_mem_offset);
- DBG("PCI: PHB IO offset = %08lx\n",
- (unsigned long)hose->io_base_virt - _IO_BASE);
+ pcibios_setup_phb_resources(hose);
/* Get probe mode and perform scan */
mode = PCI_PROBE_NORMAL;
if (node && ppc_md.pci_probe_mode)
mode = ppc_md.pci_probe_mode(bus);
- DBG(" probe mode: %d\n", mode);
+ pr_debug(" probe mode: %d\n", mode);
if (mode == PCI_PROBE_DEVTREE) {
bus->subordinate = hose->last_busno;
of_scan_bus(node, bus);
@@ -380,7 +380,7 @@ static int __init pcibios_init(void)
printk(KERN_INFO "PCI: Probing PCI hardware\n");
- /* For now, override phys_mem_access_prot. If we need it,
+ /* For now, override phys_mem_access_prot. If we need it,g
* later, we may move that initialization to each ppc_md
*/
ppc_md.phys_mem_access_prot = pci_phys_mem_access_prot;
@@ -388,6 +388,11 @@ static int __init pcibios_init(void)
if (pci_probe_only)
ppc_pci_flags |= PPC_PCI_PROBE_ONLY;
+ /* On ppc64, we always enable PCI domains and we keep domain 0
+ * backward compatible in /proc for video cards
+ */
+ ppc_pci_flags |= PPC_PCI_ENABLE_PROC_DOMAINS | PPC_PCI_COMPAT_DOMAIN_0;
+
/* Scan all of the recorded PCI controllers. */
list_for_each_entry_safe(hose, tmp, &hose_list, list_node) {
scan_phb(hose);
@@ -422,8 +427,8 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
if (bus->self) {
struct resource *res = bus->resource[0];
- DBG("IO unmapping for PCI-PCI bridge %s\n",
- pci_name(bus->self));
+ pr_debug("IO unmapping for PCI-PCI bridge %s\n",
+ pci_name(bus->self));
__flush_hash_table_range(&init_mm, res->start + _IO_BASE,
res->end + _IO_BASE + 1);
@@ -437,8 +442,8 @@ int pcibios_unmap_io_space(struct pci_bus *bus)
if (hose->io_base_alloc == 0)
return 0;
- DBG("IO unmapping for PHB %s\n", hose->dn->full_name);
- DBG(" alloc=0x%p\n", hose->io_base_alloc);
+ pr_debug("IO unmapping for PHB %s\n", hose->dn->full_name);
+ pr_debug(" alloc=0x%p\n", hose->io_base_alloc);
/* This is a PHB, we fully unmap the IO area */
vunmap(hose->io_base_alloc);
@@ -463,11 +468,11 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus)
* thus HPTEs will be faulted in when needed
*/
if (bus->self) {
- DBG("IO mapping for PCI-PCI bridge %s\n",
- pci_name(bus->self));
- DBG(" virt=0x%016lx...0x%016lx\n",
- bus->resource[0]->start + _IO_BASE,
- bus->resource[0]->end + _IO_BASE);
+ pr_debug("IO mapping for PCI-PCI bridge %s\n",
+ pci_name(bus->self));
+ pr_debug(" virt=0x%016lx...0x%016lx\n",
+ bus->resource[0]->start + _IO_BASE,
+ bus->resource[0]->end + _IO_BASE);
return 0;
}
@@ -496,11 +501,11 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus)
hose->io_base_virt = (void __iomem *)(area->addr +
hose->io_base_phys - phys_page);
- DBG("IO mapping for PHB %s\n", hose->dn->full_name);
- DBG(" phys=0x%016lx, virt=0x%p (alloc=0x%p)\n",
- hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
- DBG(" size=0x%016lx (alloc=0x%016lx)\n",
- hose->pci_io_size, size_page);
+ pr_debug("IO mapping for PHB %s\n", hose->dn->full_name);
+ pr_debug(" phys=0x%016lx, virt=0x%p (alloc=0x%p)\n",
+ hose->io_base_phys, hose->io_base_virt, hose->io_base_alloc);
+ pr_debug(" size=0x%016lx (alloc=0x%016lx)\n",
+ hose->pci_io_size, size_page);
/* Establish the mapping */
if (__ioremap_at(phys_page, area->addr, size_page,
@@ -512,24 +517,13 @@ int __devinit pcibios_map_io_space(struct pci_bus *bus)
hose->io_resource.start += io_virt_offset;
hose->io_resource.end += io_virt_offset;
- DBG(" hose->io_resource=0x%016lx...0x%016lx\n",
- hose->io_resource.start, hose->io_resource.end);
+ pr_debug(" hose->io_resource=0x%016lx...0x%016lx\n",
+ hose->io_resource.start, hose->io_resource.end);
return 0;
}
EXPORT_SYMBOL_GPL(pcibios_map_io_space);
-void __devinit pcibios_do_bus_setup(struct pci_bus *bus)
-{
- struct pci_dev *dev;
-
- if (ppc_md.pci_dma_bus_setup)
- ppc_md.pci_dma_bus_setup(bus);
-
- list_for_each_entry(dev, &bus->devices, bus_list)
- pcibios_setup_new_device(dev);
-}
-
unsigned long pci_address_to_pio(phys_addr_t address)
{
struct pci_controller *hose, *tmp;
diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c
index 260089dccfb0524aa30fd8a126af60cbd80f41ac..dcec1325d3404adf5f06df1a4b440ca07838a5d9 100644
--- a/arch/powerpc/kernel/ppc_ksyms.c
+++ b/arch/powerpc/kernel/ppc_ksyms.c
@@ -116,12 +116,6 @@ EXPORT_SYMBOL(giveup_spe);
#ifndef CONFIG_PPC64
EXPORT_SYMBOL(flush_instruction_cache);
-EXPORT_SYMBOL(flush_tlb_kernel_range);
-EXPORT_SYMBOL(flush_tlb_page);
-EXPORT_SYMBOL(_tlbie);
-#if defined(CONFIG_4xx) || defined(CONFIG_8xx) || defined(CONFIG_FSL_BOOKE)
-EXPORT_SYMBOL(_tlbil_va);
-#endif
#endif
EXPORT_SYMBOL(__flush_icache_range);
EXPORT_SYMBOL(flush_dcache_range);
@@ -174,8 +168,7 @@ EXPORT_SYMBOL(cacheable_memcpy);
#endif
#ifdef CONFIG_PPC32
-EXPORT_SYMBOL(next_mmu_context);
-EXPORT_SYMBOL(set_context);
+EXPORT_SYMBOL(switch_mmu_context);
#endif
#ifdef CONFIG_PPC_STD_MMU_32
diff --git a/arch/powerpc/xmon/setjmp.S b/arch/powerpc/kernel/ppc_save_regs.S
similarity index 98%
rename from arch/powerpc/xmon/setjmp.S
rename to arch/powerpc/kernel/ppc_save_regs.S
index 04c0b305ad4ad65ba5722c7c0813be912ef0fdb6..5113bd2285e14d546b0e1d16779f5c24d9287bfe 100644
--- a/arch/powerpc/xmon/setjmp.S
+++ b/arch/powerpc/kernel/ppc_save_regs.S
@@ -22,7 +22,7 @@
* that will be different for 32-bit and 64-bit, because of the
* different ABIs, though).
*/
-_GLOBAL(xmon_save_regs)
+_GLOBAL(ppc_save_regs)
PPC_STL r0,0*SZL(r3)
PPC_STL r2,2*SZL(r3)
PPC_STL r3,3*SZL(r3)
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 957bded0020d5d8921e11f6db8fc4517565207a8..51b201ddf9a160002d10ff3c61cd9bb2e40119a5 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -467,6 +467,8 @@ static struct regbit {
{MSR_VEC, "VEC"},
{MSR_VSX, "VSX"},
{MSR_ME, "ME"},
+ {MSR_CE, "CE"},
+ {MSR_DE, "DE"},
{MSR_IR, "IR"},
{MSR_DR, "DR"},
{0, NULL}
@@ -998,7 +1000,7 @@ unsigned long get_wchan(struct task_struct *p)
return 0;
}
-static int kstack_depth_to_print = 64;
+static int kstack_depth_to_print = CONFIG_PRINT_STACK_DEPTH;
void show_stack(struct task_struct *tsk, unsigned long *stack)
{
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 3a2dc7e6586a392292ccf3ccbfacb39151a3f675..6f73c739f1e2f443d988f3bb440dec4c648b44d9 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -1160,6 +1160,8 @@ static inline void __init phyp_dump_reserve_mem(void) {}
void __init early_init_devtree(void *params)
{
+ unsigned long limit;
+
DBG(" -> early_init_devtree(%p)\n", params);
/* Setup flat device-tree pointer */
@@ -1200,7 +1202,19 @@ void __init early_init_devtree(void *params)
early_reserve_mem();
phyp_dump_reserve_mem();
- lmb_enforce_memory_limit(memory_limit);
+ limit = memory_limit;
+ if (! limit) {
+ unsigned long memsize;
+
+ /* Ensure that total memory size is page-aligned, because
+ * otherwise mark_bootmem() gets upset. */
+ lmb_analyze();
+ memsize = lmb_phys_mem_size();
+ if ((memsize & PAGE_MASK) != memsize)
+ limit = memsize & PAGE_MASK;
+ }
+ lmb_enforce_memory_limit(limit);
+
lmb_analyze();
DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
@@ -1270,6 +1284,37 @@ struct device_node *of_find_node_by_phandle(phandle handle)
}
EXPORT_SYMBOL(of_find_node_by_phandle);
+/**
+ * of_find_next_cache_node - Find a node's subsidiary cache
+ * @np: node of type "cpu" or "cache"
+ *
+ * Returns a node pointer with refcount incremented, use
+ * of_node_put() on it when done. Caller should hold a reference
+ * to np.
+ */
+struct device_node *of_find_next_cache_node(struct device_node *np)
+{
+ struct device_node *child;
+ const phandle *handle;
+
+ handle = of_get_property(np, "l2-cache", NULL);
+ if (!handle)
+ handle = of_get_property(np, "next-level-cache", NULL);
+
+ if (handle)
+ return of_find_node_by_phandle(*handle);
+
+ /* OF on pmac has nodes instead of properties named "l2-cache"
+ * beneath CPU nodes.
+ */
+ if (!strcmp(np->type, "cpu"))
+ for_each_child_of_node(np, child)
+ if (!strcmp(child->type, "cache"))
+ return child;
+
+ return NULL;
+}
+
/**
* of_find_all_nodes - Get next node in global list
* @prev: Previous node or NULL to start iteration
diff --git a/arch/powerpc/kernel/prom_parse.c b/arch/powerpc/kernel/prom_parse.c
index a11d68976dc840fdf545120f94cda1c746a362c8..8c133556608914b0e61a1768a326d49b89c6d5d1 100644
--- a/arch/powerpc/kernel/prom_parse.c
+++ b/arch/powerpc/kernel/prom_parse.c
@@ -734,10 +734,7 @@ void of_irq_map_init(unsigned int flags)
if (flags & OF_IMAP_NO_PHANDLE) {
struct device_node *np;
- for(np = NULL; (np = of_find_all_nodes(np)) != NULL;) {
- if (of_get_property(np, "interrupt-controller", NULL)
- == NULL)
- continue;
+ for_each_node_with_property(np, "interrupt-controller") {
/* Skip /chosen/interrupt-controller */
if (strcmp(np->name, "chosen") == 0)
continue;
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index 1f8505c235482c5fea77a9f3fd1ec175a526a202..fdfe14c4bdefc735640745625cb559fc4908a2fa 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -566,6 +566,32 @@ int rtas_get_sensor(int sensor, int index, int *state)
}
EXPORT_SYMBOL(rtas_get_sensor);
+bool rtas_indicator_present(int token, int *maxindex)
+{
+ int proplen, count, i;
+ const struct indicator_elem {
+ u32 token;
+ u32 maxindex;
+ } *indicators;
+
+ indicators = of_get_property(rtas.dev, "rtas-indicators", &proplen);
+ if (!indicators)
+ return false;
+
+ count = proplen / sizeof(struct indicator_elem);
+
+ for (i = 0; i < count; i++) {
+ if (indicators[i].token != token)
+ continue;
+ if (maxindex)
+ *maxindex = indicators[i].maxindex;
+ return true;
+ }
+
+ return false;
+}
+EXPORT_SYMBOL(rtas_indicator_present);
+
int rtas_set_indicator(int indicator, int index, int new_value)
{
int token = rtas_token("set-indicator");
diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c
index 589a2797eac2006075af50ee60e6bff836f3882c..8869001ab5d7691baae77296e6ca4bdd7aec010d 100644
--- a/arch/powerpc/kernel/rtas_pci.c
+++ b/arch/powerpc/kernel/rtas_pci.c
@@ -301,51 +301,3 @@ void __init find_and_init_phbs(void)
#endif /* CONFIG_PPC32 */
}
}
-
-/* RPA-specific bits for removing PHBs */
-int pcibios_remove_root_bus(struct pci_controller *phb)
-{
- struct pci_bus *b = phb->bus;
- struct resource *res;
- int rc, i;
-
- res = b->resource[0];
- if (!res->flags) {
- printk(KERN_ERR "%s: no IO resource for PHB %s\n", __func__,
- b->name);
- return 1;
- }
-
- rc = pcibios_unmap_io_space(b);
- if (rc) {
- printk(KERN_ERR "%s: failed to unmap IO on bus %s\n",
- __func__, b->name);
- return 1;
- }
-
- if (release_resource(res)) {
- printk(KERN_ERR "%s: failed to release IO on bus %s\n",
- __func__, b->name);
- return 1;
- }
-
- for (i = 1; i < 3; ++i) {
- res = b->resource[i];
- if (!res->flags && i == 0) {
- printk(KERN_ERR "%s: no MEM resource for PHB %s\n",
- __func__, b->name);
- return 1;
- }
- if (res->flags && release_resource(res)) {
- printk(KERN_ERR
- "%s: failed to release IO %d on bus %s\n",
- __func__, i, b->name);
- return 1;
- }
- }
-
- pcibios_free_controller(phb);
-
- return 0;
-}
-EXPORT_SYMBOL(pcibios_remove_root_bus);
diff --git a/arch/powerpc/kernel/setup_32.c b/arch/powerpc/kernel/setup_32.c
index c1a27626a940d1b49c990bbcc3f3f2c5f538b097..9e1ca745d8f059afc2809353eaae248155b9c282 100644
--- a/arch/powerpc/kernel/setup_32.c
+++ b/arch/powerpc/kernel/setup_32.c
@@ -38,6 +38,7 @@
#include
#include
#include
+#include
#include "setup.h"
@@ -49,12 +50,12 @@ int boot_cpuid;
EXPORT_SYMBOL_GPL(boot_cpuid);
int boot_cpuid_phys;
+int smp_hw_index[NR_CPUS];
+
unsigned long ISA_DMA_THRESHOLD;
unsigned int DMA_MODE_READ;
unsigned int DMA_MODE_WRITE;
-int have_of = 1;
-
#ifdef CONFIG_VGA_CONSOLE
unsigned long vgacon_remap_base;
EXPORT_SYMBOL(vgacon_remap_base);
@@ -97,6 +98,10 @@ notrace unsigned long __init early_init(unsigned long dt_ptr)
PTRRELOC(&__start___ftr_fixup),
PTRRELOC(&__stop___ftr_fixup));
+ do_feature_fixups(spec->mmu_features,
+ PTRRELOC(&__start___mmu_ftr_fixup),
+ PTRRELOC(&__stop___mmu_ftr_fixup));
+
do_lwsync_fixups(spec->cpu_features,
PTRRELOC(&__start___lwsync_fixup),
PTRRELOC(&__stop___lwsync_fixup));
@@ -121,6 +126,8 @@ notrace void __init machine_init(unsigned long dt_ptr)
probe_machine();
+ setup_kdump_trampoline();
+
#ifdef CONFIG_6xx
if (cpu_has_feature(CPU_FTR_CAN_DOZE) ||
cpu_has_feature(CPU_FTR_CAN_NAP))
@@ -326,4 +333,8 @@ void __init setup_arch(char **cmdline_p)
if ( ppc_md.progress ) ppc_md.progress("arch: exit", 0x3eab);
paging_init();
+
+ /* Initialize the MMU context management stuff */
+ mmu_context_init();
+
}
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 169d74cef157d84e347afb489f3cce3d805f9a8a..d8bd2161e7388c55afcb53f77d2c03504cf073ff 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -70,7 +70,6 @@
#define DBG(fmt...)
#endif
-int have_of = 1;
int boot_cpuid = 0;
u64 ppc64_pft_size;
@@ -362,6 +361,8 @@ void __init setup_system(void)
*/
do_feature_fixups(cur_cpu_spec->cpu_features,
&__start___ftr_fixup, &__stop___ftr_fixup);
+ do_feature_fixups(cur_cpu_spec->mmu_features,
+ &__start___mmu_ftr_fixup, &__stop___mmu_ftr_fixup);
do_feature_fixups(powerpc_firmware_features,
&__start___fw_ftr_fixup, &__stop___fw_ftr_fixup);
do_lwsync_fixups(cur_cpu_spec->cpu_features,
@@ -606,8 +607,6 @@ void __init setup_per_cpu_areas(void)
for_each_possible_cpu(i) {
ptr = alloc_bootmem_pages_node(NODE_DATA(cpu_to_node(i)), size);
- if (!ptr)
- panic("Cannot allocate cpu data for CPU %d\n", i);
paca[i].data_offset = ptr - __per_cpu_start;
memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start);
diff --git a/arch/powerpc/kernel/smp-tbsync.c b/arch/powerpc/kernel/smp-tbsync.c
index bc892e69b4f732cd11c46a5ccb79be51eaf34fae..a5e54526403df182f074ee3bd90c715d6f54b444 100644
--- a/arch/powerpc/kernel/smp-tbsync.c
+++ b/arch/powerpc/kernel/smp-tbsync.c
@@ -113,7 +113,7 @@ void __devinit smp_generic_give_timebase(void)
{
int i, score, score2, old, min=0, max=5000, offset=1000;
- printk("Synchronizing timebase\n");
+ pr_debug("Software timebase sync\n");
/* if this fails then this kernel won't work anyway... */
tbsync = kzalloc( sizeof(*tbsync), GFP_KERNEL );
@@ -123,13 +123,13 @@ void __devinit smp_generic_give_timebase(void)
while (!tbsync->ack)
barrier();
- printk("Got ack\n");
+ pr_debug("Got ack\n");
/* binary search */
for (old = -1; old != offset ; offset = (min+max) / 2) {
score = start_contest(kSetAndTest, offset, NUM_ITER);
- printk("score %d, offset %d\n", score, offset );
+ pr_debug("score %d, offset %d\n", score, offset );
if( score > 0 )
max = offset;
@@ -140,8 +140,8 @@ void __devinit smp_generic_give_timebase(void)
score = start_contest(kSetAndTest, min, NUM_ITER);
score2 = start_contest(kSetAndTest, max, NUM_ITER);
- printk("Min %d (score %d), Max %d (score %d)\n",
- min, score, max, score2);
+ pr_debug("Min %d (score %d), Max %d (score %d)\n",
+ min, score, max, score2);
score = abs(score);
score2 = abs(score2);
offset = (score < score2) ? min : max;
@@ -155,7 +155,7 @@ void __devinit smp_generic_give_timebase(void)
if (score2 <= score || score2 < 20)
break;
}
- printk("Final offset: %d (%d/%d)\n", offset, score2, NUM_ITER );
+ pr_debug("Final offset: %d (%d/%d)\n", offset, score2, NUM_ITER );
/* exiting */
tbsync->cmd = kExit;
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index ff9f7010097d1568943329a15d8c04458beddc4c..8ac3f721d2359e20b09476fbe85aafc7c161f97d 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -57,7 +57,6 @@
#define DBG(fmt...)
#endif
-int smp_hw_index[NR_CPUS];
struct thread_info *secondary_ti;
cpumask_t cpu_possible_map = CPU_MASK_NONE;
@@ -123,6 +122,65 @@ void smp_message_recv(int msg)
}
}
+static irqreturn_t call_function_action(int irq, void *data)
+{
+ generic_smp_call_function_interrupt();
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t reschedule_action(int irq, void *data)
+{
+ /* we just need the return path side effect of checking need_resched */
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t call_function_single_action(int irq, void *data)
+{
+ generic_smp_call_function_single_interrupt();
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t debug_ipi_action(int irq, void *data)
+{
+ smp_message_recv(PPC_MSG_DEBUGGER_BREAK);
+ return IRQ_HANDLED;
+}
+
+static irq_handler_t smp_ipi_action[] = {
+ [PPC_MSG_CALL_FUNCTION] = call_function_action,
+ [PPC_MSG_RESCHEDULE] = reschedule_action,
+ [PPC_MSG_CALL_FUNC_SINGLE] = call_function_single_action,
+ [PPC_MSG_DEBUGGER_BREAK] = debug_ipi_action,
+};
+
+const char *smp_ipi_name[] = {
+ [PPC_MSG_CALL_FUNCTION] = "ipi call function",
+ [PPC_MSG_RESCHEDULE] = "ipi reschedule",
+ [PPC_MSG_CALL_FUNC_SINGLE] = "ipi call function single",
+ [PPC_MSG_DEBUGGER_BREAK] = "ipi debugger",
+};
+
+/* optional function to request ipi, for controllers with >= 4 ipis */
+int smp_request_message_ipi(int virq, int msg)
+{
+ int err;
+
+ if (msg < 0 || msg > PPC_MSG_DEBUGGER_BREAK) {
+ return -EINVAL;
+ }
+#if !defined(CONFIG_DEBUGGER) && !defined(CONFIG_KEXEC)
+ if (msg == PPC_MSG_DEBUGGER_BREAK) {
+ return 1;
+ }
+#endif
+ err = request_irq(virq, smp_ipi_action[msg], IRQF_DISABLED|IRQF_PERCPU,
+ smp_ipi_name[msg], 0);
+ WARN(err < 0, "unable to request_irq %d for %s (rc %d)\n",
+ virq, smp_ipi_name[msg], err);
+
+ return err;
+}
+
void smp_send_reschedule(int cpu)
{
if (likely(smp_ops))
@@ -408,8 +466,7 @@ out:
static struct device_node *cpu_to_l2cache(int cpu)
{
struct device_node *np;
- const phandle *php;
- phandle ph;
+ struct device_node *cache;
if (!cpu_present(cpu))
return NULL;
@@ -418,13 +475,11 @@ static struct device_node *cpu_to_l2cache(int cpu)
if (np == NULL)
return NULL;
- php = of_get_property(np, "l2-cache", NULL);
- if (php == NULL)
- return NULL;
- ph = *php;
+ cache = of_find_next_cache_node(np);
+
of_node_put(np);
- return of_find_node_by_phandle(ph);
+ return cache;
}
/* Activate a secondary processor. */
diff --git a/arch/powerpc/kernel/swsusp.c b/arch/powerpc/kernel/swsusp.c
index 77b7b34b5955f0d6453e829b75454f0df145da9c..560c961195015d39b0f62296f48413f27f394f0f 100644
--- a/arch/powerpc/kernel/swsusp.c
+++ b/arch/powerpc/kernel/swsusp.c
@@ -34,6 +34,6 @@ void save_processor_state(void)
void restore_processor_state(void)
{
#ifdef CONFIG_PPC32
- set_context(current->active_mm->context.id, current->active_mm->pgd);
+ switch_mmu_context(NULL, current->active_mm);
#endif
}
diff --git a/arch/powerpc/kernel/swsusp_32.S b/arch/powerpc/kernel/swsusp_32.S
index 77fc76607ab2080d41667f3171fcdef9ee44dfd1..b47d8ceffb5232e21e8990b86ea29d18f2f16024 100644
--- a/arch/powerpc/kernel/swsusp_32.S
+++ b/arch/powerpc/kernel/swsusp_32.S
@@ -5,7 +5,7 @@
#include
#include
#include
-
+#include
/*
* Structure for storing CPU registers on the save area.
@@ -279,7 +279,7 @@ END_FTR_SECTION_IFSET(CPU_FTR_ALTIVEC)
mtibatl 3,r4
#endif
-BEGIN_FTR_SECTION
+BEGIN_MMU_FTR_SECTION
li r4,0
mtspr SPRN_DBAT4U,r4
mtspr SPRN_DBAT4L,r4
@@ -297,7 +297,7 @@ BEGIN_FTR_SECTION
mtspr SPRN_IBAT6L,r4
mtspr SPRN_IBAT7U,r4
mtspr SPRN_IBAT7L,r4
-END_FTR_SECTION_IFSET(CPU_FTR_HAS_HIGH_BATS)
+END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_HIGH_BATS)
/* Flush all TLBs */
lis r4,0x1000
diff --git a/arch/powerpc/kernel/sysfs.c b/arch/powerpc/kernel/sysfs.c
index 20885a38237aa0ab5f028aa67537b365b340aad0..0c64f10087b9833b871ac62b55e177a48f2f5af3 100644
--- a/arch/powerpc/kernel/sysfs.c
+++ b/arch/powerpc/kernel/sysfs.c
@@ -566,7 +566,6 @@ static bool cache_is_unified(struct device_node *np)
static struct cache_desc * __cpuinit create_cache_index_info(struct device_node *np, struct kobject *parent, int index, int level)
{
- const phandle *next_cache_phandle;
struct device_node *next_cache;
struct cache_desc *new, **end;
@@ -591,11 +590,7 @@ static struct cache_desc * __cpuinit create_cache_index_info(struct device_node
while (*end)
end = &(*end)->next;
- next_cache_phandle = of_get_property(np, "l2-cache", NULL);
- if (!next_cache_phandle)
- goto out;
-
- next_cache = of_find_node_by_phandle(*next_cache_phandle);
+ next_cache = of_find_next_cache_node(np);
if (!next_cache)
goto out;
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index e2ee66b5831d9f86cf41704784863cd74bbc3c91..e1f3a51404292ee3c422295e47292da9b7c22256 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -164,8 +164,6 @@ static u64 tb_to_ns_scale __read_mostly;
static unsigned tb_to_ns_shift __read_mostly;
static unsigned long boot_tb __read_mostly;
-static struct gettimeofday_struct do_gtod;
-
extern struct timezone sys_tz;
static long timezone_offset;
@@ -415,31 +413,9 @@ void udelay(unsigned long usecs)
}
EXPORT_SYMBOL(udelay);
-
-/*
- * There are two copies of tb_to_xs and stamp_xsec so that no
- * lock is needed to access and use these values in
- * do_gettimeofday. We alternate the copies and as long as a
- * reasonable time elapses between changes, there will never
- * be inconsistent values. ntpd has a minimum of one minute
- * between updates.
- */
static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec,
u64 new_tb_to_xs)
{
- unsigned temp_idx;
- struct gettimeofday_vars *temp_varp;
-
- temp_idx = (do_gtod.var_idx == 0);
- temp_varp = &do_gtod.vars[temp_idx];
-
- temp_varp->tb_to_xs = new_tb_to_xs;
- temp_varp->tb_orig_stamp = new_tb_stamp;
- temp_varp->stamp_xsec = new_stamp_xsec;
- smp_mb();
- do_gtod.varp = temp_varp;
- do_gtod.var_idx = temp_idx;
-
/*
* tb_update_count is used to allow the userspace gettimeofday code
* to assure itself that it sees a consistent view of the tb_to_xs and
@@ -456,6 +432,7 @@ static inline void update_gtod(u64 new_tb_stamp, u64 new_stamp_xsec,
vdso_data->tb_to_xs = new_tb_to_xs;
vdso_data->wtom_clock_sec = wall_to_monotonic.tv_sec;
vdso_data->wtom_clock_nsec = wall_to_monotonic.tv_nsec;
+ vdso_data->stamp_xtime = xtime;
smp_wmb();
++(vdso_data->tb_update_count);
}
@@ -514,9 +491,7 @@ static int __init iSeries_tb_recal(void)
tb_ticks_per_sec = new_tb_ticks_per_sec;
calc_cputime_factors();
div128_by_32( XSEC_PER_SEC, 0, tb_ticks_per_sec, &divres );
- do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
tb_to_xs = divres.result_low;
- do_gtod.varp->tb_to_xs = tb_to_xs;
vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
vdso_data->tb_to_xs = tb_to_xs;
}
@@ -988,15 +963,6 @@ void __init time_init(void)
sys_tz.tz_dsttime = 0;
}
- do_gtod.varp = &do_gtod.vars[0];
- do_gtod.var_idx = 0;
- do_gtod.varp->tb_orig_stamp = tb_last_jiffy;
- __get_cpu_var(last_jiffy) = tb_last_jiffy;
- do_gtod.varp->stamp_xsec = (u64) xtime.tv_sec * XSEC_PER_SEC;
- do_gtod.tb_ticks_per_sec = tb_ticks_per_sec;
- do_gtod.varp->tb_to_xs = tb_to_xs;
- do_gtod.tb_to_us = tb_to_us;
-
vdso_data->tb_orig_stamp = tb_last_jiffy;
vdso_data->tb_update_count = 0;
vdso_data->tb_ticks_per_sec = tb_ticks_per_sec;
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index f5def6cf5cd61b0114458c74a5171fe724683267..5457e9575685291a5a84dcad525cd89b009c9e1e 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -1160,37 +1160,85 @@ void CacheLockingException(struct pt_regs *regs, unsigned long address,
#ifdef CONFIG_SPE
void SPEFloatingPointException(struct pt_regs *regs)
{
+ extern int do_spe_mathemu(struct pt_regs *regs);
unsigned long spefscr;
int fpexc_mode;
int code = 0;
+ int err;
+
+ preempt_disable();
+ if (regs->msr & MSR_SPE)
+ giveup_spe(current);
+ preempt_enable();
spefscr = current->thread.spefscr;
fpexc_mode = current->thread.fpexc_mode;
- /* Hardware does not neccessarily set sticky
- * underflow/overflow/invalid flags */
if ((spefscr & SPEFSCR_FOVF) && (fpexc_mode & PR_FP_EXC_OVF)) {
code = FPE_FLTOVF;
- spefscr |= SPEFSCR_FOVFS;
}
else if ((spefscr & SPEFSCR_FUNF) && (fpexc_mode & PR_FP_EXC_UND)) {
code = FPE_FLTUND;
- spefscr |= SPEFSCR_FUNFS;
}
else if ((spefscr & SPEFSCR_FDBZ) && (fpexc_mode & PR_FP_EXC_DIV))
code = FPE_FLTDIV;
else if ((spefscr & SPEFSCR_FINV) && (fpexc_mode & PR_FP_EXC_INV)) {
code = FPE_FLTINV;
- spefscr |= SPEFSCR_FINVS;
}
else if ((spefscr & (SPEFSCR_FG | SPEFSCR_FX)) && (fpexc_mode & PR_FP_EXC_RES))
code = FPE_FLTRES;
- current->thread.spefscr = spefscr;
+ err = do_spe_mathemu(regs);
+ if (err == 0) {
+ regs->nip += 4; /* skip emulated instruction */
+ emulate_single_step(regs);
+ return;
+ }
+
+ if (err == -EFAULT) {
+ /* got an error reading the instruction */
+ _exception(SIGSEGV, regs, SEGV_ACCERR, regs->nip);
+ } else if (err == -EINVAL) {
+ /* didn't recognize the instruction */
+ printk(KERN_ERR "unrecognized spe instruction "
+ "in %s at %lx\n", current->comm, regs->nip);
+ } else {
+ _exception(SIGFPE, regs, code, regs->nip);
+ }
- _exception(SIGFPE, regs, code, regs->nip);
return;
}
+
+void SPEFloatingPointRoundException(struct pt_regs *regs)
+{
+ extern int speround_handler(struct pt_regs *regs);
+ int err;
+
+ preempt_disable();
+ if (regs->msr & MSR_SPE)
+ giveup_spe(current);
+ preempt_enable();
+
+ regs->nip -= 4;
+ err = speround_handler(regs);
+ if (err == 0) {
+ regs->nip += 4; /* skip emulated instruction */
+ emulate_single_step(regs);
+ return;
+ }
+
+ if (err == -EFAULT) {
+ /* got an error reading the instruction */
+ _exception(SIGSEGV, regs, SEGV_ACCERR, regs->nip);
+ } else if (err == -EINVAL) {
+ /* didn't recognize the instruction */
+ printk(KERN_ERR "unrecognized spe instruction "
+ "in %s at %lx\n", current->comm, regs->nip);
+ } else {
+ _exception(SIGFPE, regs, 0, regs->nip);
+ return;
+ }
+}
#endif
/*
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 65639a43e644888577d4bf92328f54c95aef99fb..ad06d5c75b15ddb4ac6c92e00cfde45f3174d452 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -184,8 +184,7 @@ static void dump_vdso_pages(struct vm_area_struct * vma)
* This is called from binfmt_elf, we create the special vma for the
* vDSO and insert it into the mm struct tree
*/
-int arch_setup_additional_pages(struct linux_binprm *bprm,
- int executable_stack)
+int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
{
struct mm_struct *mm = current->mm;
struct page **vdso_pagelist;
@@ -567,6 +566,11 @@ static __init int vdso_fixup_features(struct lib32_elfinfo *v32,
do_feature_fixups(cur_cpu_spec->cpu_features,
start64, start64 + size64);
+ start64 = find_section64(v64->hdr, "__mmu_ftr_fixup", &size64);
+ if (start64)
+ do_feature_fixups(cur_cpu_spec->mmu_features,
+ start64, start64 + size64);
+
start64 = find_section64(v64->hdr, "__fw_ftr_fixup", &size64);
if (start64)
do_feature_fixups(powerpc_firmware_features,
@@ -583,6 +587,11 @@ static __init int vdso_fixup_features(struct lib32_elfinfo *v32,
do_feature_fixups(cur_cpu_spec->cpu_features,
start32, start32 + size32);
+ start32 = find_section32(v32->hdr, "__mmu_ftr_fixup", &size32);
+ if (start32)
+ do_feature_fixups(cur_cpu_spec->mmu_features,
+ start32, start32 + size32);
+
#ifdef CONFIG_PPC64
start32 = find_section32(v32->hdr, "__fw_ftr_fixup", &size32);
if (start32)
diff --git a/arch/powerpc/kernel/vdso32/gettimeofday.S b/arch/powerpc/kernel/vdso32/gettimeofday.S
index 72ca26df457e567d75225aaad333eeebf0e783a2..ee038d4bf252f7e423aaaf442f6a71c9245e5bed 100644
--- a/arch/powerpc/kernel/vdso32/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso32/gettimeofday.S
@@ -16,6 +16,13 @@
#include
#include
+/* Offset for the low 32-bit part of a field of long type */
+#ifdef CONFIG_PPC64
+#define LOPART 4
+#else
+#define LOPART 0
+#endif
+
.text
/*
* Exact prototype of gettimeofday
@@ -90,101 +97,53 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
mflr r12 /* r12 saves lr */
.cfi_register lr,r12
- mr r10,r3 /* r10 saves id */
mr r11,r4 /* r11 saves tp */
bl __get_datapage@local /* get data page */
mr r9,r3 /* datapage ptr in r9 */
- beq cr1,50f /* if monotonic -> jump there */
-
- /*
- * CLOCK_REALTIME
- */
-
- bl __do_get_xsec@local /* get xsec from tb & kernel */
- bne- 98f /* out of line -> do syscall */
-
- /* seconds are xsec >> 20 */
- rlwinm r5,r4,12,20,31
- rlwimi r5,r3,12,0,19
- stw r5,TSPC32_TV_SEC(r11)
- /* get remaining xsec and convert to nsec. we scale
- * up remaining xsec by 12 bits and get the top 32 bits
- * of the multiplication, then we multiply by 1000
- */
- rlwinm r5,r4,12,0,19
- lis r6,1000000@h
- ori r6,r6,1000000@l
- mulhwu r5,r5,r6
- mulli r5,r5,1000
- stw r5,TSPC32_TV_NSEC(r11)
- mtlr r12
- crclr cr0*4+so
- li r3,0
- blr
+50: bl __do_get_tspec@local /* get sec/nsec from tb & kernel */
+ bne cr1,80f /* not monotonic -> all done */
/*
* CLOCK_MONOTONIC
*/
-50: bl __do_get_xsec@local /* get xsec from tb & kernel */
- bne- 98f /* out of line -> do syscall */
-
- /* seconds are xsec >> 20 */
- rlwinm r6,r4,12,20,31
- rlwimi r6,r3,12,0,19
-
- /* get remaining xsec and convert to nsec. we scale
- * up remaining xsec by 12 bits and get the top 32 bits
- * of the multiplication, then we multiply by 1000
- */
- rlwinm r7,r4,12,0,19
- lis r5,1000000@h
- ori r5,r5,1000000@l
- mulhwu r7,r7,r5
- mulli r7,r7,1000
-
/* now we must fixup using wall to monotonic. We need to snapshot
* that value and do the counter trick again. Fortunately, we still
* have the counter value in r8 that was returned by __do_get_xsec.
- * At this point, r6,r7 contain our sec/nsec values, r3,r4 and r5
- * can be used
+ * At this point, r3,r4 contain our sec/nsec values, r5 and r6
+ * can be used, r7 contains NSEC_PER_SEC.
*/
- lwz r3,WTOM_CLOCK_SEC(r9)
- lwz r4,WTOM_CLOCK_NSEC(r9)
+ lwz r5,WTOM_CLOCK_SEC(r9)
+ lwz r6,WTOM_CLOCK_NSEC(r9)
- /* We now have our result in r3,r4. We create a fake dependency
- * on that result and re-check the counter
+ /* We now have our offset in r5,r6. We create a fake dependency
+ * on that value and re-check the counter
*/
- or r5,r4,r3
- xor r0,r5,r5
+ or r0,r6,r5
+ xor r0,r0,r0
add r9,r9,r0
-#ifdef CONFIG_PPC64
- lwz r0,(CFG_TB_UPDATE_COUNT+4)(r9)
-#else
- lwz r0,(CFG_TB_UPDATE_COUNT)(r9)
-#endif
+ lwz r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
cmpl cr0,r8,r0 /* check if updated */
bne- 50b
- /* Calculate and store result. Note that this mimmics the C code,
+ /* Calculate and store result. Note that this mimics the C code,
* which may cause funny results if nsec goes negative... is that
* possible at all ?
*/
- add r3,r3,r6
- add r4,r4,r7
- lis r5,NSEC_PER_SEC@h
- ori r5,r5,NSEC_PER_SEC@l
- cmpl cr0,r4,r5
- cmpli cr1,r4,0
+ add r3,r3,r5
+ add r4,r4,r6
+ cmpw cr0,r4,r7
+ cmpwi cr1,r4,0
blt 1f
- subf r4,r5,r4
+ subf r4,r7,r4
addi r3,r3,1
-1: bge cr1,1f
+1: bge cr1,80f
addi r3,r3,-1
- add r4,r4,r5
-1: stw r3,TSPC32_TV_SEC(r11)
+ add r4,r4,r7
+
+80: stw r3,TSPC32_TV_SEC(r11)
stw r4,TSPC32_TV_NSEC(r11)
mtlr r12
@@ -195,10 +154,6 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
/*
* syscall fallback
*/
-98:
- mtlr r12
- mr r3,r10
- mr r4,r11
99:
li r0,__NR_clock_gettime
sc
@@ -254,11 +209,7 @@ __do_get_xsec:
/* Check for update count & load values. We use the low
* order 32 bits of the update count
*/
-#ifdef CONFIG_PPC64
-1: lwz r8,(CFG_TB_UPDATE_COUNT+4)(r9)
-#else
-1: lwz r8,(CFG_TB_UPDATE_COUNT)(r9)
-#endif
+1: lwz r8,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
andi. r0,r8,1 /* pending update ? loop */
bne- 1b
xor r0,r8,r8 /* create dependency */
@@ -305,11 +256,7 @@ __do_get_xsec:
or r6,r4,r3
xor r0,r6,r6
add r9,r9,r0
-#ifdef CONFIG_PPC64
- lwz r0,(CFG_TB_UPDATE_COUNT+4)(r9)
-#else
- lwz r0,(CFG_TB_UPDATE_COUNT)(r9)
-#endif
+ lwz r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
cmpl cr0,r8,r0 /* check if updated */
bne- 1b
@@ -322,3 +269,98 @@ __do_get_xsec:
*/
3: blr
.cfi_endproc
+
+/*
+ * This is the core of clock_gettime(), it returns the current
+ * time in seconds and nanoseconds in r3 and r4.
+ * It expects the datapage ptr in r9 and doesn't clobber it.
+ * It clobbers r0, r5, r6, r10 and returns NSEC_PER_SEC in r7.
+ * On return, r8 contains the counter value that can be reused.
+ * This clobbers cr0 but not any other cr field.
+ */
+__do_get_tspec:
+ .cfi_startproc
+ /* Check for update count & load values. We use the low
+ * order 32 bits of the update count
+ */
+1: lwz r8,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
+ andi. r0,r8,1 /* pending update ? loop */
+ bne- 1b
+ xor r0,r8,r8 /* create dependency */
+ add r9,r9,r0
+
+ /* Load orig stamp (offset to TB) */
+ lwz r5,CFG_TB_ORIG_STAMP(r9)
+ lwz r6,(CFG_TB_ORIG_STAMP+4)(r9)
+
+ /* Get a stable TB value */
+2: mftbu r3
+ mftbl r4
+ mftbu r0
+ cmpl cr0,r3,r0
+ bne- 2b
+
+ /* Subtract tb orig stamp and shift left 12 bits.
+ */
+ subfc r7,r6,r4
+ subfe r0,r5,r3
+ slwi r0,r0,12
+ rlwimi. r0,r7,12,20,31
+ slwi r7,r7,12
+
+ /* Load scale factor & do multiplication */
+ lwz r5,CFG_TB_TO_XS(r9) /* load values */
+ lwz r6,(CFG_TB_TO_XS+4)(r9)
+ mulhwu r3,r7,r6
+ mullw r10,r7,r5
+ mulhwu r4,r7,r5
+ addc r10,r3,r10
+ li r3,0
+
+ beq+ 4f /* skip high part computation if 0 */
+ mulhwu r3,r0,r5
+ mullw r7,r0,r5
+ mulhwu r5,r0,r6
+ mullw r6,r0,r6
+ adde r4,r4,r7
+ addze r3,r3
+ addc r4,r4,r5
+ addze r3,r3
+ addc r10,r10,r6
+
+4: addze r4,r4 /* add in carry */
+ lis r7,NSEC_PER_SEC@h
+ ori r7,r7,NSEC_PER_SEC@l
+ mulhwu r4,r4,r7 /* convert to nanoseconds */
+
+ /* At this point, we have seconds & nanoseconds since the xtime
+ * stamp in r3+CA and r4. Load & add the xtime stamp.
+ */
+#ifdef CONFIG_PPC64
+ lwz r5,STAMP_XTIME+TSPC64_TV_SEC+LOPART(r9)
+ lwz r6,STAMP_XTIME+TSPC64_TV_NSEC+LOPART(r9)
+#else
+ lwz r5,STAMP_XTIME+TSPC32_TV_SEC(r9)
+ lwz r6,STAMP_XTIME+TSPC32_TV_NSEC(r9)
+#endif
+ add r4,r4,r6
+ adde r3,r3,r5
+
+ /* We now have our result in r3,r4. We create a fake dependency
+ * on that result and re-check the counter
+ */
+ or r6,r4,r3
+ xor r0,r6,r6
+ add r9,r9,r0
+ lwz r0,(CFG_TB_UPDATE_COUNT+LOPART)(r9)
+ cmpl cr0,r8,r0 /* check if updated */
+ bne- 1b
+
+ /* check for nanosecond overflow and adjust if necessary */
+ cmpw r4,r7
+ bltlr /* all done if no overflow */
+ subf r4,r7,r4 /* adjust if overflow */
+ addi r3,r3,1
+
+ blr
+ .cfi_endproc
diff --git a/arch/powerpc/kernel/vdso32/vdso32.lds.S b/arch/powerpc/kernel/vdso32/vdso32.lds.S
index be3b6a41dc09f7c78402405182502eff3f360dd4..904ef1360dd7bca3ee4cbffead2e4dfefcce57f2 100644
--- a/arch/powerpc/kernel/vdso32/vdso32.lds.S
+++ b/arch/powerpc/kernel/vdso32/vdso32.lds.S
@@ -33,6 +33,9 @@ SECTIONS
. = ALIGN(8);
__ftr_fixup : { *(__ftr_fixup) }
+ . = ALIGN(8);
+ __mmu_ftr_fixup : { *(__mmu_ftr_fixup) }
+
. = ALIGN(8);
__lwsync_fixup : { *(__lwsync_fixup) }
diff --git a/arch/powerpc/kernel/vdso64/gettimeofday.S b/arch/powerpc/kernel/vdso64/gettimeofday.S
index c6401f9e37f1fd2427cc6fa9373a3bff335949c8..262cd5857a56dff9b53657e2a0872b7c769cc63e 100644
--- a/arch/powerpc/kernel/vdso64/gettimeofday.S
+++ b/arch/powerpc/kernel/vdso64/gettimeofday.S
@@ -75,90 +75,49 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
mflr r12 /* r12 saves lr */
.cfi_register lr,r12
- mr r10,r3 /* r10 saves id */
mr r11,r4 /* r11 saves tp */
bl V_LOCAL_FUNC(__get_datapage) /* get data page */
- beq cr1,50f /* if monotonic -> jump there */
-
- /*
- * CLOCK_REALTIME
- */
-
- bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */
-
- lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */
- ori r7,r7,16960
- rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */
- rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */
- std r5,TSPC64_TV_SEC(r11) /* store sec in tv */
- subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */
- mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) /
- * XSEC_PER_SEC
- */
- rldicl r0,r0,44,20
- mulli r0,r0,1000 /* nsec = usec * 1000 */
- std r0,TSPC64_TV_NSEC(r11) /* store nsec in tp */
-
- mtlr r12
- crclr cr0*4+so
- li r3,0
- blr
+50: bl V_LOCAL_FUNC(__do_get_tspec) /* get time from tb & kernel */
+ bne cr1,80f /* if not monotonic, all done */
/*
* CLOCK_MONOTONIC
*/
-50: bl V_LOCAL_FUNC(__do_get_xsec) /* get xsec from tb & kernel */
-
- lis r7,15 /* r7 = 1000000 = USEC_PER_SEC */
- ori r7,r7,16960
- rldicl r5,r4,44,20 /* r5 = sec = xsec / XSEC_PER_SEC */
- rldicr r6,r5,20,43 /* r6 = sec * XSEC_PER_SEC */
- subf r0,r6,r4 /* r0 = xsec = (xsec - r6) */
- mulld r0,r0,r7 /* usec = (xsec * USEC_PER_SEC) /
- * XSEC_PER_SEC
- */
- rldicl r6,r0,44,20
- mulli r6,r6,1000 /* nsec = usec * 1000 */
-
/* now we must fixup using wall to monotonic. We need to snapshot
* that value and do the counter trick again. Fortunately, we still
- * have the counter value in r8 that was returned by __do_get_xsec.
- * At this point, r5,r6 contain our sec/nsec values.
- * can be used
+ * have the counter value in r8 that was returned by __do_get_tspec.
+ * At this point, r4,r5 contain our sec/nsec values.
*/
- lwa r4,WTOM_CLOCK_SEC(r3)
- lwa r7,WTOM_CLOCK_NSEC(r3)
+ lwa r6,WTOM_CLOCK_SEC(r3)
+ lwa r9,WTOM_CLOCK_NSEC(r3)
- /* We now have our result in r4,r7. We create a fake dependency
+ /* We now have our result in r6,r9. We create a fake dependency
* on that result and re-check the counter
*/
- or r9,r4,r7
- xor r0,r9,r9
+ or r0,r6,r9
+ xor r0,r0,r0
add r3,r3,r0
ld r0,CFG_TB_UPDATE_COUNT(r3)
cmpld cr0,r0,r8 /* check if updated */
bne- 50b
- /* Calculate and store result. Note that this mimmics the C code,
- * which may cause funny results if nsec goes negative... is that
- * possible at all ?
+ /* Add wall->monotonic offset and check for overflow or underflow.
*/
- add r4,r4,r5
- add r7,r7,r6
- lis r9,NSEC_PER_SEC@h
- ori r9,r9,NSEC_PER_SEC@l
- cmpl cr0,r7,r9
- cmpli cr1,r7,0
+ add r4,r4,r6
+ add r5,r5,r9
+ cmpd cr0,r5,r7
+ cmpdi cr1,r5,0
blt 1f
- subf r7,r9,r7
+ subf r5,r7,r5
addi r4,r4,1
-1: bge cr1,1f
+1: bge cr1,80f
addi r4,r4,-1
- add r7,r7,r9
-1: std r4,TSPC64_TV_SEC(r11)
- std r7,TSPC64_TV_NSEC(r11)
+ add r5,r5,r7
+
+80: std r4,TSPC64_TV_SEC(r11)
+ std r5,TSPC64_TV_NSEC(r11)
mtlr r12
crclr cr0*4+so
@@ -168,10 +127,6 @@ V_FUNCTION_BEGIN(__kernel_clock_gettime)
/*
* syscall fallback
*/
-98:
- mtlr r12
- mr r3,r10
- mr r4,r11
99:
li r0,__NR_clock_gettime
sc
@@ -253,3 +208,59 @@ V_FUNCTION_BEGIN(__do_get_xsec)
blr
.cfi_endproc
V_FUNCTION_END(__do_get_xsec)
+
+/*
+ * This is the core of clock_gettime(), it returns the current
+ * time in seconds and nanoseconds in r4 and r5.
+ * It expects the datapage ptr in r3 and doesn't clobber it.
+ * It clobbers r0 and r6 and returns NSEC_PER_SEC in r7.
+ * On return, r8 contains the counter value that can be reused.
+ * This clobbers cr0 but not any other cr field.
+ */
+V_FUNCTION_BEGIN(__do_get_tspec)
+ .cfi_startproc
+ /* check for update count & load values */
+1: ld r8,CFG_TB_UPDATE_COUNT(r3)
+ andi. r0,r8,1 /* pending update ? loop */
+ bne- 1b
+ xor r0,r8,r8 /* create dependency */
+ add r3,r3,r0
+
+ /* Get TB & offset it. We use the MFTB macro which will generate
+ * workaround code for Cell.
+ */
+ MFTB(r7)
+ ld r9,CFG_TB_ORIG_STAMP(r3)
+ subf r7,r9,r7
+
+ /* Scale result */
+ ld r5,CFG_TB_TO_XS(r3)
+ sldi r7,r7,12 /* compute time since stamp_xtime */
+ mulhdu r6,r7,r5 /* in units of 2^-32 seconds */
+
+ /* Add stamp since epoch */
+ ld r4,STAMP_XTIME+TSPC64_TV_SEC(r3)
+ ld r5,STAMP_XTIME+TSPC64_TV_NSEC(r3)
+ or r0,r4,r5
+ or r0,r0,r6
+ xor r0,r0,r0
+ add r3,r3,r0
+ ld r0,CFG_TB_UPDATE_COUNT(r3)
+ cmpld r0,r8 /* check if updated */
+ bne- 1b /* reload if so */
+
+ /* convert to seconds & nanoseconds and add to stamp */
+ lis r7,NSEC_PER_SEC@h
+ ori r7,r7,NSEC_PER_SEC@l
+ mulhwu r0,r6,r7 /* compute nanoseconds and */
+ srdi r6,r6,32 /* seconds since stamp_xtime */
+ clrldi r0,r0,32
+ add r5,r5,r0 /* add nanoseconds together */
+ cmpd r5,r7 /* overflow? */
+ add r4,r4,r6
+ bltlr /* all done if no overflow */
+ subf r5,r7,r5 /* if overflow, adjust */
+ addi r4,r4,1
+ blr
+ .cfi_endproc
+V_FUNCTION_END(__do_get_tspec)
diff --git a/arch/powerpc/kernel/vdso64/vdso64.lds.S b/arch/powerpc/kernel/vdso64/vdso64.lds.S
index d0b2526dd38d05e0dda9870d4dd1eea529845bea..0e615404e247353cd9a696bb086d03486013403e 100644
--- a/arch/powerpc/kernel/vdso64/vdso64.lds.S
+++ b/arch/powerpc/kernel/vdso64/vdso64.lds.S
@@ -34,6 +34,9 @@ SECTIONS
. = ALIGN(8);
__ftr_fixup : { *(__ftr_fixup) }
+ . = ALIGN(8);
+ __mmu_ftr_fixup : { *(__mmu_ftr_fixup) }
+
. = ALIGN(8);
__lwsync_fixup : { *(__lwsync_fixup) }
diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c
index a11e6bc59b307e9d9ac7e6892e95a4eef34f6ca1..94aa7b011b276528d2ec7677e2e01abac612fc7e 100644
--- a/arch/powerpc/kernel/vio.c
+++ b/arch/powerpc/kernel/vio.c
@@ -41,9 +41,9 @@
static struct bus_type vio_bus_type;
static struct vio_dev vio_bus_device = { /* fake "parent" device */
- .name = vio_bus_device.dev.bus_id,
+ .name = "vio",
.type = "",
- .dev.bus_id = "vio",
+ .dev.init_name = "vio",
.dev.bus = &vio_bus_type,
};
@@ -1216,7 +1216,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
viodev->irq = irq_of_parse_and_map(of_node, 0);
- snprintf(viodev->dev.bus_id, BUS_ID_SIZE, "%x", *unit_address);
+ dev_set_name(&viodev->dev, "%x", *unit_address);
viodev->name = of_node->name;
viodev->type = of_node->type;
viodev->unit_address = *unit_address;
@@ -1243,7 +1243,7 @@ struct vio_dev *vio_register_device_node(struct device_node *of_node)
/* register with generic device framework */
if (device_register(&viodev->dev)) {
printk(KERN_ERR "%s: failed to register device %s\n",
- __func__, viodev->dev.bus_id);
+ __func__, dev_name(&viodev->dev));
/* XXX free TCE table */
kfree(viodev);
return NULL;
@@ -1400,13 +1400,13 @@ static struct vio_dev *vio_find_name(const char *name)
struct vio_dev *vio_find_node(struct device_node *vnode)
{
const uint32_t *unit_address;
- char kobj_name[BUS_ID_SIZE];
+ char kobj_name[20];
/* construct the kobject name from the device node */
unit_address = of_get_property(vnode, "reg", NULL);
if (!unit_address)
return NULL;
- snprintf(kobj_name, BUS_ID_SIZE, "%x", *unit_address);
+ snprintf(kobj_name, sizeof(kobj_name), "%x", *unit_address);
return vio_find_name(kobj_name);
}
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index 2412c056baa45bcf81d5716786ccc6edfd9118a3..47bf15cd2c9eb62be6d00d12f2f1e8130976ce93 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -152,6 +152,12 @@ SECTIONS
__stop___ftr_fixup = .;
}
. = ALIGN(8);
+ __mmu_ftr_fixup : AT(ADDR(__mmu_ftr_fixup) - LOAD_OFFSET) {
+ __start___mmu_ftr_fixup = .;
+ *(__mmu_ftr_fixup)
+ __stop___mmu_ftr_fixup = .;
+ }
+ . = ALIGN(8);
__lwsync_fixup : AT(ADDR(__lwsync_fixup) - LOAD_OFFSET) {
__start___lwsync_fixup = .;
*(__lwsync_fixup)
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index fda9baada132b1c5348dfec8b84ba99d8bc24dc1..8bef0efcdfe19ba11b1f5d8d9f3561213f6a2a45 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -28,6 +28,7 @@
#include
#include
#include
+#include "../mm/mmu_decl.h"
gfn_t unalias_gfn(struct kvm *kvm, gfn_t gfn)
@@ -330,7 +331,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
/* XXX It would be nice to differentiate between heavyweight exit and
* sched_out here, since we could avoid the TLB flush for heavyweight
* exits. */
- _tlbia();
+ _tlbil_all();
}
int kvm_arch_vcpu_ioctl_debug_guest(struct kvm_vcpu *vcpu,
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index d69912c07ce732c937412dac1286ba0223ded96c..8db35278a4b43643c2cf42b280b79ad9d33be7bc 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -6,6 +6,9 @@ ifeq ($(CONFIG_PPC64),y)
EXTRA_CFLAGS += -mno-minimal-toc
endif
+CFLAGS_REMOVE_code-patching.o = -pg
+CFLAGS_REMOVE_feature-fixups.o = -pg
+
obj-y := string.o alloc.o \
checksum_$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o
diff --git a/arch/powerpc/lib/copyuser_64.S b/arch/powerpc/lib/copyuser_64.S
index 25ec5378afa454232704d48c604e968efdd33cc0..70693a5c12a113d36d55a0dd1800a255589e73a0 100644
--- a/arch/powerpc/lib/copyuser_64.S
+++ b/arch/powerpc/lib/copyuser_64.S
@@ -26,11 +26,24 @@ _GLOBAL(__copy_tofrom_user)
andi. r6,r6,7
PPC_MTOCRF 0x01,r5
blt cr1,.Lshort_copy
+/* Below we want to nop out the bne if we're on a CPU that has the
+ * CPU_FTR_UNALIGNED_LD_STD bit set and the CPU_FTR_CP_USE_DCBTZ bit
+ * cleared.
+ * At the time of writing the only CPU that has this combination of bits
+ * set is Power6.
+ */
+BEGIN_FTR_SECTION
+ nop
+FTR_SECTION_ELSE
bne .Ldst_unaligned
+ALT_FTR_SECTION_END(CPU_FTR_UNALIGNED_LD_STD | CPU_FTR_CP_USE_DCBTZ, \
+ CPU_FTR_UNALIGNED_LD_STD)
.Ldst_aligned:
- andi. r0,r4,7
addi r3,r3,-16
+BEGIN_FTR_SECTION
+ andi. r0,r4,7
bne .Lsrc_unaligned
+END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
srdi r7,r5,4
20: ld r9,0(r4)
addi r4,r4,-8
@@ -138,7 +151,7 @@ _GLOBAL(__copy_tofrom_user)
PPC_MTOCRF 0x01,r6 /* put #bytes to 8B bdry into cr7 */
subf r5,r6,r5
li r7,0
- cmpldi r1,r5,16
+ cmpldi cr1,r5,16
bf cr7*4+3,1f
35: lbz r0,0(r4)
81: stb r0,0(r3)
diff --git a/arch/powerpc/lib/dma-noncoherent.c b/arch/powerpc/lib/dma-noncoherent.c
index 31734c0969cd28014b226f300f0b1932186ea4e1..b7dc4c19f58211641d2bb1db44dea62315a3d641 100644
--- a/arch/powerpc/lib/dma-noncoherent.c
+++ b/arch/powerpc/lib/dma-noncoherent.c
@@ -77,26 +77,26 @@ static DEFINE_SPINLOCK(consistent_lock);
* the amount of RAM found at boot time.) I would imagine that get_vm_area()
* would have to initialise this each time prior to calling vm_region_alloc().
*/
-struct vm_region {
+struct ppc_vm_region {
struct list_head vm_list;
unsigned long vm_start;
unsigned long vm_end;
};
-static struct vm_region consistent_head = {
+static struct ppc_vm_region consistent_head = {
.vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
.vm_start = CONSISTENT_BASE,
.vm_end = CONSISTENT_END,
};
-static struct vm_region *
-vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
+static struct ppc_vm_region *
+ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp)
{
unsigned long addr = head->vm_start, end = head->vm_end - size;
unsigned long flags;
- struct vm_region *c, *new;
+ struct ppc_vm_region *c, *new;
- new = kmalloc(sizeof(struct vm_region), gfp);
+ new = kmalloc(sizeof(struct ppc_vm_region), gfp);
if (!new)
goto out;
@@ -130,9 +130,9 @@ vm_region_alloc(struct vm_region *head, size_t size, gfp_t gfp)
return NULL;
}
-static struct vm_region *vm_region_find(struct vm_region *head, unsigned long addr)
+static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr)
{
- struct vm_region *c;
+ struct ppc_vm_region *c;
list_for_each_entry(c, &head->vm_list, vm_list) {
if (c->vm_start == addr)
@@ -151,7 +151,7 @@ void *
__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
{
struct page *page;
- struct vm_region *c;
+ struct ppc_vm_region *c;
unsigned long order;
u64 mask = 0x00ffffff, limit; /* ISA default */
@@ -191,7 +191,7 @@ __dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
/*
* Allocate a virtual address in the consistent mapping region.
*/
- c = vm_region_alloc(&consistent_head, size,
+ c = ppc_vm_region_alloc(&consistent_head, size,
gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
if (c) {
unsigned long vaddr = c->vm_start;
@@ -239,7 +239,7 @@ EXPORT_SYMBOL(__dma_alloc_coherent);
*/
void __dma_free_coherent(size_t size, void *vaddr)
{
- struct vm_region *c;
+ struct ppc_vm_region *c;
unsigned long flags, addr;
pte_t *ptep;
@@ -247,7 +247,7 @@ void __dma_free_coherent(size_t size, void *vaddr)
spin_lock_irqsave(&consistent_lock, flags);
- c = vm_region_find(&consistent_head, (unsigned long)vaddr);
+ c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr);
if (!c)
goto no_area;
@@ -320,7 +320,6 @@ static int __init dma_alloc_init(void)
ret = -ENOMEM;
break;
}
- WARN_ON(!pmd_none(*pmd));
pte = pte_alloc_kernel(pmd, CONSISTENT_BASE);
if (!pte) {
diff --git a/arch/powerpc/lib/memcpy_64.S b/arch/powerpc/lib/memcpy_64.S
index 3f131129d1c1a496607637f39eb1f563596768d0..fe2d34e5332d8250dd778ca77489631e2a4e9266 100644
--- a/arch/powerpc/lib/memcpy_64.S
+++ b/arch/powerpc/lib/memcpy_64.S
@@ -18,11 +18,23 @@ _GLOBAL(memcpy)
andi. r6,r6,7
dcbt 0,r4
blt cr1,.Lshort_copy
+/* Below we want to nop out the bne if we're on a CPU that has the
+ CPU_FTR_UNALIGNED_LD_STD bit set and the CPU_FTR_CP_USE_DCBTZ bit
+ cleared.
+ At the time of writing the only CPU that has this combination of bits
+ set is Power6. */
+BEGIN_FTR_SECTION
+ nop
+FTR_SECTION_ELSE
bne .Ldst_unaligned
+ALT_FTR_SECTION_END(CPU_FTR_UNALIGNED_LD_STD | CPU_FTR_CP_USE_DCBTZ, \
+ CPU_FTR_UNALIGNED_LD_STD)
.Ldst_aligned:
- andi. r0,r4,7
addi r3,r3,-16
+BEGIN_FTR_SECTION
+ andi. r0,r4,7
bne .Lsrc_unaligned
+END_FTR_SECTION_IFCLR(CPU_FTR_UNALIGNED_LD_STD)
srdi r7,r5,4
ld r9,0(r4)
addi r4,r4,-8
@@ -131,7 +143,7 @@ _GLOBAL(memcpy)
PPC_MTOCRF 0x01,r6 # put #bytes to 8B bdry into cr7
subf r5,r6,r5
li r7,0
- cmpldi r1,r5,16
+ cmpldi cr1,r5,16
bf cr7*4+3,1f
lbz r0,0(r4)
stb r0,0(r3)
diff --git a/arch/powerpc/math-emu/Makefile b/arch/powerpc/math-emu/Makefile
index 03aa98dd9f0a5c0b1a6f564bd9a658d2260620cc..f9e506a735ae2e0d833bb0d0197b7d323679a67c 100644
--- a/arch/powerpc/math-emu/Makefile
+++ b/arch/powerpc/math-emu/Makefile
@@ -11,6 +11,8 @@ obj-$(CONFIG_MATH_EMULATION) += fabs.o fadd.o fadds.o fcmpo.o fcmpu.o \
mcrfs.o mffs.o mtfsb0.o mtfsb1.o \
mtfsf.o mtfsfi.o stfiwx.o stfs.o
+obj-$(CONFIG_SPE) += math_efp.o
+
CFLAGS_fabs.o = -fno-builtin-fabs
CFLAGS_math.o = -fno-builtin-fabs
diff --git a/arch/powerpc/math-emu/fadd.c b/arch/powerpc/math-emu/fadd.c
index 04d3b4aa32cedb9ab75801aaa6b21a5019118a98..0158a16e2b826b7597563dd56c7a12c63c5c4ee7 100644
--- a/arch/powerpc/math-emu/fadd.c
+++ b/arch/powerpc/math-emu/fadd.c
@@ -13,7 +13,6 @@ fadd(void *frD, void *frA, void *frB)
FP_DECL_D(B);
FP_DECL_D(R);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
diff --git a/arch/powerpc/math-emu/fcmpo.c b/arch/powerpc/math-emu/fcmpo.c
index b5dc4498cd71023dfdc237f79415b1043901f36b..5bce011c2aece41137e83ca30611cbdc7f5db7f1 100644
--- a/arch/powerpc/math-emu/fcmpo.c
+++ b/arch/powerpc/math-emu/fcmpo.c
@@ -14,7 +14,6 @@ fcmpo(u32 *ccr, int crfD, void *frA, void *frB)
FP_DECL_EX;
int code[4] = { (1 << 3), (1 << 1), (1 << 2), (1 << 0) };
long cmp;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
@@ -29,7 +28,7 @@ fcmpo(u32 *ccr, int crfD, void *frA, void *frB)
#endif
if (A_c == FP_CLS_NAN || B_c == FP_CLS_NAN)
- ret |= EFLAG_VXVC;
+ FP_SET_EXCEPTION(EFLAG_VXVC);
FP_CMP_D(cmp, A, B, 2);
cmp = code[(cmp + 1) & 3];
@@ -44,5 +43,5 @@ fcmpo(u32 *ccr, int crfD, void *frA, void *frB)
printk("CR: %08x\n", *ccr);
#endif
- return ret;
+ return FP_CUR_EXCEPTIONS;
}
diff --git a/arch/powerpc/math-emu/fdiv.c b/arch/powerpc/math-emu/fdiv.c
index 2db15097d98e9ba65ad049023561bdf397d26054..a29239c05e3eecb13b47b193b9e54e4aa04696d2 100644
--- a/arch/powerpc/math-emu/fdiv.c
+++ b/arch/powerpc/math-emu/fdiv.c
@@ -13,7 +13,6 @@ fdiv(void *frD, void *frA, void *frB)
FP_DECL_D(B);
FP_DECL_D(R);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
@@ -28,22 +27,22 @@ fdiv(void *frD, void *frA, void *frB)
#endif
if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
- ret |= EFLAG_VXZDZ;
+ FP_SET_EXCEPTION(EFLAG_VXZDZ);
#ifdef DEBUG
printk("%s: FPSCR_VXZDZ raised\n", __func__);
#endif
}
if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
- ret |= EFLAG_VXIDI;
+ FP_SET_EXCEPTION(EFLAG_VXIDI);
#ifdef DEBUG
printk("%s: FPSCR_VXIDI raised\n", __func__);
#endif
}
if (B_c == FP_CLS_ZERO && A_c != FP_CLS_ZERO) {
- ret |= EFLAG_DIVZERO;
+ FP_SET_EXCEPTION(EFLAG_DIVZERO);
if (__FPU_TRAP_P(EFLAG_DIVZERO))
- return ret;
+ return FP_CUR_EXCEPTIONS;
}
FP_DIV_D(R, A, B);
diff --git a/arch/powerpc/math-emu/fdivs.c b/arch/powerpc/math-emu/fdivs.c
index 797f6a9a20b53f405687828c556ca526235ef201..526bc261275f81178320637a82f467c30131cbe5 100644
--- a/arch/powerpc/math-emu/fdivs.c
+++ b/arch/powerpc/math-emu/fdivs.c
@@ -14,7 +14,6 @@ fdivs(void *frD, void *frA, void *frB)
FP_DECL_D(B);
FP_DECL_D(R);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
@@ -29,22 +28,22 @@ fdivs(void *frD, void *frA, void *frB)
#endif
if (A_c == FP_CLS_ZERO && B_c == FP_CLS_ZERO) {
- ret |= EFLAG_VXZDZ;
+ FP_SET_EXCEPTION(EFLAG_VXZDZ);
#ifdef DEBUG
printk("%s: FPSCR_VXZDZ raised\n", __func__);
#endif
}
if (A_c == FP_CLS_INF && B_c == FP_CLS_INF) {
- ret |= EFLAG_VXIDI;
+ FP_SET_EXCEPTION(EFLAG_VXIDI);
#ifdef DEBUG
printk("%s: FPSCR_VXIDI raised\n", __func__);
#endif
}
if (B_c == FP_CLS_ZERO && A_c != FP_CLS_ZERO) {
- ret |= EFLAG_DIVZERO;
+ FP_SET_EXCEPTION(EFLAG_DIVZERO);
if (__FPU_TRAP_P(EFLAG_DIVZERO))
- return ret;
+ return FP_CUR_EXCEPTIONS;
}
FP_DIV_D(R, A, B);
diff --git a/arch/powerpc/math-emu/fmadd.c b/arch/powerpc/math-emu/fmadd.c
index 925313aa6f82b38b73307d0bfea6936d3021917e..8c3f20aa5a95359e354986f429720d3c2c0d9f73 100644
--- a/arch/powerpc/math-emu/fmadd.c
+++ b/arch/powerpc/math-emu/fmadd.c
@@ -15,7 +15,6 @@ fmadd(void *frD, void *frA, void *frB, void *frC)
FP_DECL_D(C);
FP_DECL_D(T);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
@@ -33,12 +32,12 @@ fmadd(void *frD, void *frA, void *frB, void *frC)
if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
(A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
- ret |= EFLAG_VXIMZ;
+ FP_SET_EXCEPTION(EFLAG_VXIMZ);
FP_MUL_D(T, A, C);
if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
- ret |= EFLAG_VXISI;
+ FP_SET_EXCEPTION(EFLAG_VXISI);
FP_ADD_D(R, T, B);
diff --git a/arch/powerpc/math-emu/fmadds.c b/arch/powerpc/math-emu/fmadds.c
index aea80ef79399d3630d5574a534a49e64d978810a..794fb31e59d17c878b44c7927c7dd5431cc3ac9c 100644
--- a/arch/powerpc/math-emu/fmadds.c
+++ b/arch/powerpc/math-emu/fmadds.c
@@ -16,7 +16,6 @@ fmadds(void *frD, void *frA, void *frB, void *frC)
FP_DECL_D(C);
FP_DECL_D(T);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
@@ -34,12 +33,12 @@ fmadds(void *frD, void *frA, void *frB, void *frC)
if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
(A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
- ret |= EFLAG_VXIMZ;
+ FP_SET_EXCEPTION(EFLAG_VXIMZ);
FP_MUL_D(T, A, C);
if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
- ret |= EFLAG_VXISI;
+ FP_SET_EXCEPTION(EFLAG_VXISI);
FP_ADD_D(R, T, B);
diff --git a/arch/powerpc/math-emu/fmsub.c b/arch/powerpc/math-emu/fmsub.c
index a644d525fca66442f0c2322b52fe0d9c6d1d4f5c..626f6fed84ac5c06541013dcd7df5c5c4a2f8104 100644
--- a/arch/powerpc/math-emu/fmsub.c
+++ b/arch/powerpc/math-emu/fmsub.c
@@ -15,7 +15,6 @@ fmsub(void *frD, void *frA, void *frB, void *frC)
FP_DECL_D(C);
FP_DECL_D(T);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
@@ -33,7 +32,7 @@ fmsub(void *frD, void *frA, void *frB, void *frC)
if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
(A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
- ret |= EFLAG_VXIMZ;
+ FP_SET_EXCEPTION(EFLAG_VXIMZ);
FP_MUL_D(T, A, C);
@@ -41,7 +40,7 @@ fmsub(void *frD, void *frA, void *frB, void *frC)
B_s ^= 1;
if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
- ret |= EFLAG_VXISI;
+ FP_SET_EXCEPTION(EFLAG_VXISI);
FP_ADD_D(R, T, B);
diff --git a/arch/powerpc/math-emu/fmsubs.c b/arch/powerpc/math-emu/fmsubs.c
index 2fdeeb9bb569690b5c5e67adca34f2f3d51f68da..3425bc899760483012920dcd3bcbf74fb03057a5 100644
--- a/arch/powerpc/math-emu/fmsubs.c
+++ b/arch/powerpc/math-emu/fmsubs.c
@@ -16,7 +16,6 @@ fmsubs(void *frD, void *frA, void *frB, void *frC)
FP_DECL_D(C);
FP_DECL_D(T);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
@@ -34,7 +33,7 @@ fmsubs(void *frD, void *frA, void *frB, void *frC)
if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
(A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
- ret |= EFLAG_VXIMZ;
+ FP_SET_EXCEPTION(EFLAG_VXIMZ);
FP_MUL_D(T, A, C);
@@ -42,7 +41,7 @@ fmsubs(void *frD, void *frA, void *frB, void *frC)
B_s ^= 1;
if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
- ret |= EFLAG_VXISI;
+ FP_SET_EXCEPTION(EFLAG_VXISI);
FP_ADD_D(R, T, B);
diff --git a/arch/powerpc/math-emu/fmul.c b/arch/powerpc/math-emu/fmul.c
index 391fd17d3440fd85c1637480857ffc386c219e6c..2c1929779892b6e29f228467c0625a46cff830ee 100644
--- a/arch/powerpc/math-emu/fmul.c
+++ b/arch/powerpc/math-emu/fmul.c
@@ -13,7 +13,6 @@ fmul(void *frD, void *frA, void *frB)
FP_DECL_D(B);
FP_DECL_D(R);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
@@ -31,7 +30,7 @@ fmul(void *frD, void *frA, void *frB)
if ((A_c == FP_CLS_INF && B_c == FP_CLS_ZERO) ||
(A_c == FP_CLS_ZERO && B_c == FP_CLS_INF))
- ret |= EFLAG_VXIMZ;
+ FP_SET_EXCEPTION(EFLAG_VXIMZ);
FP_MUL_D(R, A, B);
diff --git a/arch/powerpc/math-emu/fmuls.c b/arch/powerpc/math-emu/fmuls.c
index 2d3ec5f7da20f4c20a255e4eca8b804f2a47a913..f5ad5c9c77d001b3ed9bacbff92dcaea66a88e75 100644
--- a/arch/powerpc/math-emu/fmuls.c
+++ b/arch/powerpc/math-emu/fmuls.c
@@ -14,7 +14,6 @@ fmuls(void *frD, void *frA, void *frB)
FP_DECL_D(B);
FP_DECL_D(R);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
@@ -32,7 +31,7 @@ fmuls(void *frD, void *frA, void *frB)
if ((A_c == FP_CLS_INF && B_c == FP_CLS_ZERO) ||
(A_c == FP_CLS_ZERO && B_c == FP_CLS_INF))
- ret |= EFLAG_VXIMZ;
+ FP_SET_EXCEPTION(EFLAG_VXIMZ);
FP_MUL_D(R, A, B);
diff --git a/arch/powerpc/math-emu/fnmadd.c b/arch/powerpc/math-emu/fnmadd.c
index 2497b86494e5425ac64fe8355b91a0c2827afb4a..e817bc5453efc4597d8ebd79df40924fb2e44cda 100644
--- a/arch/powerpc/math-emu/fnmadd.c
+++ b/arch/powerpc/math-emu/fnmadd.c
@@ -15,7 +15,6 @@ fnmadd(void *frD, void *frA, void *frB, void *frC)
FP_DECL_D(C);
FP_DECL_D(T);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
@@ -33,12 +32,12 @@ fnmadd(void *frD, void *frA, void *frB, void *frC)
if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
(A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
- ret |= EFLAG_VXIMZ;
+ FP_SET_EXCEPTION(EFLAG_VXIMZ);
FP_MUL_D(T, A, C);
if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
- ret |= EFLAG_VXISI;
+ FP_SET_EXCEPTION(EFLAG_VXISI);
FP_ADD_D(R, T, B);
diff --git a/arch/powerpc/math-emu/fnmadds.c b/arch/powerpc/math-emu/fnmadds.c
index ee9d71e0b376f7578a9ebd25c0b8ef12746d4e72..4db4b7d9ba8d3d7157cd999ec4dcb042e799054f 100644
--- a/arch/powerpc/math-emu/fnmadds.c
+++ b/arch/powerpc/math-emu/fnmadds.c
@@ -16,7 +16,6 @@ fnmadds(void *frD, void *frA, void *frB, void *frC)
FP_DECL_D(C);
FP_DECL_D(T);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
@@ -34,12 +33,12 @@ fnmadds(void *frD, void *frA, void *frB, void *frC)
if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
(A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
- ret |= EFLAG_VXIMZ;
+ FP_SET_EXCEPTION(EFLAG_VXIMZ);
FP_MUL_D(T, A, C);
if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
- ret |= EFLAG_VXISI;
+ FP_SET_EXCEPTION(EFLAG_VXISI);
FP_ADD_D(R, T, B);
diff --git a/arch/powerpc/math-emu/fnmsub.c b/arch/powerpc/math-emu/fnmsub.c
index 3885a77acc9324919f89ee5aef1d6c842d4c1b17..f65979fa770eac810e07762874c2c206f38cd602 100644
--- a/arch/powerpc/math-emu/fnmsub.c
+++ b/arch/powerpc/math-emu/fnmsub.c
@@ -15,7 +15,6 @@ fnmsub(void *frD, void *frA, void *frB, void *frC)
FP_DECL_D(C);
FP_DECL_D(T);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
@@ -33,7 +32,7 @@ fnmsub(void *frD, void *frA, void *frB, void *frC)
if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
(A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
- ret |= EFLAG_VXIMZ;
+ FP_SET_EXCEPTION(EFLAG_VXIMZ);
FP_MUL_D(T, A, C);
@@ -41,7 +40,7 @@ fnmsub(void *frD, void *frA, void *frB, void *frC)
B_s ^= 1;
if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
- ret |= EFLAG_VXISI;
+ FP_SET_EXCEPTION(EFLAG_VXISI);
FP_ADD_D(R, T, B);
diff --git a/arch/powerpc/math-emu/fnmsubs.c b/arch/powerpc/math-emu/fnmsubs.c
index f835dfeb0fd1f3b8e8cdafec9d8cf581f6025b4b..9021dacc03b8b2f1d5326cc03c75ff97eb19d3c8 100644
--- a/arch/powerpc/math-emu/fnmsubs.c
+++ b/arch/powerpc/math-emu/fnmsubs.c
@@ -16,7 +16,6 @@ fnmsubs(void *frD, void *frA, void *frB, void *frC)
FP_DECL_D(C);
FP_DECL_D(T);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
@@ -34,7 +33,7 @@ fnmsubs(void *frD, void *frA, void *frB, void *frC)
if ((A_c == FP_CLS_INF && C_c == FP_CLS_ZERO) ||
(A_c == FP_CLS_ZERO && C_c == FP_CLS_INF))
- ret |= EFLAG_VXIMZ;
+ FP_SET_EXCEPTION(EFLAG_VXIMZ);
FP_MUL_D(T, A, C);
@@ -42,7 +41,7 @@ fnmsubs(void *frD, void *frA, void *frB, void *frC)
B_s ^= 1;
if (T_s != B_s && T_c == FP_CLS_INF && B_c == FP_CLS_INF)
- ret |= EFLAG_VXISI;
+ FP_SET_EXCEPTION(EFLAG_VXISI);
FP_ADD_D(R, T, B);
diff --git a/arch/powerpc/math-emu/fsqrt.c b/arch/powerpc/math-emu/fsqrt.c
index 3e90072693a0befdd1661000bfe629f1074ae9d0..a55fc7d49983fe331eecf5f931a4790af6d6de63 100644
--- a/arch/powerpc/math-emu/fsqrt.c
+++ b/arch/powerpc/math-emu/fsqrt.c
@@ -12,7 +12,6 @@ fsqrt(void *frD, void *frB)
FP_DECL_D(B);
FP_DECL_D(R);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frB);
@@ -25,9 +24,9 @@ fsqrt(void *frD, void *frB)
#endif
if (B_s && B_c != FP_CLS_ZERO)
- ret |= EFLAG_VXSQRT;
+ FP_SET_EXCEPTION(EFLAG_VXSQRT);
if (B_c == FP_CLS_NAN)
- ret |= EFLAG_VXSNAN;
+ FP_SET_EXCEPTION(EFLAG_VXSNAN);
FP_SQRT_D(R, B);
diff --git a/arch/powerpc/math-emu/fsqrts.c b/arch/powerpc/math-emu/fsqrts.c
index 2843be986e2e97aa1a09f2ad8e5e7eb46cdd9852..31dccbfc39ff8073a66849e3ca2617b40b1bc34c 100644
--- a/arch/powerpc/math-emu/fsqrts.c
+++ b/arch/powerpc/math-emu/fsqrts.c
@@ -13,7 +13,6 @@ fsqrts(void *frD, void *frB)
FP_DECL_D(B);
FP_DECL_D(R);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p %p\n", __func__, frD, frB);
@@ -26,9 +25,9 @@ fsqrts(void *frD, void *frB)
#endif
if (B_s && B_c != FP_CLS_ZERO)
- ret |= EFLAG_VXSQRT;
+ FP_SET_EXCEPTION(EFLAG_VXSQRT);
if (B_c == FP_CLS_NAN)
- ret |= EFLAG_VXSNAN;
+ FP_SET_EXCEPTION(EFLAG_VXSNAN);
FP_SQRT_D(R, B);
diff --git a/arch/powerpc/math-emu/fsub.c b/arch/powerpc/math-emu/fsub.c
index 78b09446a0e14f61e5288aba797df5ca87c523de..02c5dff458baa2afac1648a7ccdc997eef31f5e3 100644
--- a/arch/powerpc/math-emu/fsub.c
+++ b/arch/powerpc/math-emu/fsub.c
@@ -13,7 +13,6 @@ fsub(void *frD, void *frA, void *frB)
FP_DECL_D(B);
FP_DECL_D(R);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
@@ -31,7 +30,7 @@ fsub(void *frD, void *frA, void *frB)
B_s ^= 1;
if (A_s != B_s && A_c == FP_CLS_INF && B_c == FP_CLS_INF)
- ret |= EFLAG_VXISI;
+ FP_SET_EXCEPTION(EFLAG_VXISI);
FP_ADD_D(R, A, B);
diff --git a/arch/powerpc/math-emu/fsubs.c b/arch/powerpc/math-emu/fsubs.c
index d3bf90863cf29ba0abec9285c0c386785b4b20c6..5d9b18c35e074aeb8997b0f9dc1a78059ea0a79a 100644
--- a/arch/powerpc/math-emu/fsubs.c
+++ b/arch/powerpc/math-emu/fsubs.c
@@ -14,7 +14,6 @@ fsubs(void *frD, void *frA, void *frB)
FP_DECL_D(B);
FP_DECL_D(R);
FP_DECL_EX;
- int ret = 0;
#ifdef DEBUG
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
@@ -32,7 +31,7 @@ fsubs(void *frD, void *frA, void *frB)
B_s ^= 1;
if (A_s != B_s && A_c == FP_CLS_INF && B_c == FP_CLS_INF)
- ret |= EFLAG_VXISI;
+ FP_SET_EXCEPTION(EFLAG_VXISI);
FP_ADD_D(R, A, B);
diff --git a/arch/powerpc/math-emu/math_efp.c b/arch/powerpc/math-emu/math_efp.c
new file mode 100644
index 0000000000000000000000000000000000000000..41f4ef30e480e6deb7584627d42a91f5d3f4f674
--- /dev/null
+++ b/arch/powerpc/math-emu/math_efp.c
@@ -0,0 +1,720 @@
+/*
+ * arch/powerpc/math-emu/math_efp.c
+ *
+ * Copyright (C) 2006-2008 Freescale Semiconductor, Inc. All rights reserved.
+ *
+ * Author: Ebony Zhu,
+ * Yu Liu,
+ *
+ * Derived from arch/alpha/math-emu/math.c
+ * arch/powerpc/math-emu/math.c
+ *
+ * Description:
+ * This file is the exception handler to make E500 SPE instructions
+ * fully comply with IEEE-754 floating point standard.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include
+
+#include
+#include
+
+#define FP_EX_BOOKE_E500_SPE
+#include
+
+#include
+#include
+#include
+
+#define EFAPU 0x4
+
+#define VCT 0x4
+#define SPFP 0x6
+#define DPFP 0x7
+
+#define EFSADD 0x2c0
+#define EFSSUB 0x2c1
+#define EFSABS 0x2c4
+#define EFSNABS 0x2c5
+#define EFSNEG 0x2c6
+#define EFSMUL 0x2c8
+#define EFSDIV 0x2c9
+#define EFSCMPGT 0x2cc
+#define EFSCMPLT 0x2cd
+#define EFSCMPEQ 0x2ce
+#define EFSCFD 0x2cf
+#define EFSCFSI 0x2d1
+#define EFSCTUI 0x2d4
+#define EFSCTSI 0x2d5
+#define EFSCTUF 0x2d6
+#define EFSCTSF 0x2d7
+#define EFSCTUIZ 0x2d8
+#define EFSCTSIZ 0x2da
+
+#define EVFSADD 0x280
+#define EVFSSUB 0x281
+#define EVFSABS 0x284
+#define EVFSNABS 0x285
+#define EVFSNEG 0x286
+#define EVFSMUL 0x288
+#define EVFSDIV 0x289
+#define EVFSCMPGT 0x28c
+#define EVFSCMPLT 0x28d
+#define EVFSCMPEQ 0x28e
+#define EVFSCTUI 0x294
+#define EVFSCTSI 0x295
+#define EVFSCTUF 0x296
+#define EVFSCTSF 0x297
+#define EVFSCTUIZ 0x298
+#define EVFSCTSIZ 0x29a
+
+#define EFDADD 0x2e0
+#define EFDSUB 0x2e1
+#define EFDABS 0x2e4
+#define EFDNABS 0x2e5
+#define EFDNEG 0x2e6
+#define EFDMUL 0x2e8
+#define EFDDIV 0x2e9
+#define EFDCTUIDZ 0x2ea
+#define EFDCTSIDZ 0x2eb
+#define EFDCMPGT 0x2ec
+#define EFDCMPLT 0x2ed
+#define EFDCMPEQ 0x2ee
+#define EFDCFS 0x2ef
+#define EFDCTUI 0x2f4
+#define EFDCTSI 0x2f5
+#define EFDCTUF 0x2f6
+#define EFDCTSF 0x2f7
+#define EFDCTUIZ 0x2f8
+#define EFDCTSIZ 0x2fa
+
+#define AB 2
+#define XA 3
+#define XB 4
+#define XCR 5
+#define NOTYPE 0
+
+#define SIGN_BIT_S (1UL << 31)
+#define SIGN_BIT_D (1ULL << 63)
+#define FP_EX_MASK (FP_EX_INEXACT | FP_EX_INVALID | FP_EX_DIVZERO | \
+ FP_EX_UNDERFLOW | FP_EX_OVERFLOW)
+
+union dw_union {
+ u64 dp[1];
+ u32 wp[2];
+};
+
+static unsigned long insn_type(unsigned long speinsn)
+{
+ unsigned long ret = NOTYPE;
+
+ switch (speinsn & 0x7ff) {
+ case EFSABS: ret = XA; break;
+ case EFSADD: ret = AB; break;
+ case EFSCFD: ret = XB; break;
+ case EFSCMPEQ: ret = XCR; break;
+ case EFSCMPGT: ret = XCR; break;
+ case EFSCMPLT: ret = XCR; break;
+ case EFSCTSF: ret = XB; break;
+ case EFSCTSI: ret = XB; break;
+ case EFSCTSIZ: ret = XB; break;
+ case EFSCTUF: ret = XB; break;
+ case EFSCTUI: ret = XB; break;
+ case EFSCTUIZ: ret = XB; break;
+ case EFSDIV: ret = AB; break;
+ case EFSMUL: ret = AB; break;
+ case EFSNABS: ret = XA; break;
+ case EFSNEG: ret = XA; break;
+ case EFSSUB: ret = AB; break;
+ case EFSCFSI: ret = XB; break;
+
+ case EVFSABS: ret = XA; break;
+ case EVFSADD: ret = AB; break;
+ case EVFSCMPEQ: ret = XCR; break;
+ case EVFSCMPGT: ret = XCR; break;
+ case EVFSCMPLT: ret = XCR; break;
+ case EVFSCTSF: ret = XB; break;
+ case EVFSCTSI: ret = XB; break;
+ case EVFSCTSIZ: ret = XB; break;
+ case EVFSCTUF: ret = XB; break;
+ case EVFSCTUI: ret = XB; break;
+ case EVFSCTUIZ: ret = XB; break;
+ case EVFSDIV: ret = AB; break;
+ case EVFSMUL: ret = AB; break;
+ case EVFSNABS: ret = XA; break;
+ case EVFSNEG: ret = XA; break;
+ case EVFSSUB: ret = AB; break;
+
+ case EFDABS: ret = XA; break;
+ case EFDADD: ret = AB; break;
+ case EFDCFS: ret = XB; break;
+ case EFDCMPEQ: ret = XCR; break;
+ case EFDCMPGT: ret = XCR; break;
+ case EFDCMPLT: ret = XCR; break;
+ case EFDCTSF: ret = XB; break;
+ case EFDCTSI: ret = XB; break;
+ case EFDCTSIDZ: ret = XB; break;
+ case EFDCTSIZ: ret = XB; break;
+ case EFDCTUF: ret = XB; break;
+ case EFDCTUI: ret = XB; break;
+ case EFDCTUIDZ: ret = XB; break;
+ case EFDCTUIZ: ret = XB; break;
+ case EFDDIV: ret = AB; break;
+ case EFDMUL: ret = AB; break;
+ case EFDNABS: ret = XA; break;
+ case EFDNEG: ret = XA; break;
+ case EFDSUB: ret = AB; break;
+
+ default:
+ printk(KERN_ERR "\nOoops! SPE instruction no type found.");
+ printk(KERN_ERR "\ninst code: %08lx\n", speinsn);
+ }
+
+ return ret;
+}
+
+int do_spe_mathemu(struct pt_regs *regs)
+{
+ FP_DECL_EX;
+ int IR, cmp;
+
+ unsigned long type, func, fc, fa, fb, src, speinsn;
+ union dw_union vc, va, vb;
+
+ if (get_user(speinsn, (unsigned int __user *) regs->nip))
+ return -EFAULT;
+ if ((speinsn >> 26) != EFAPU)
+ return -EINVAL; /* not an spe instruction */
+
+ type = insn_type(speinsn);
+ if (type == NOTYPE)
+ return -ENOSYS;
+
+ func = speinsn & 0x7ff;
+ fc = (speinsn >> 21) & 0x1f;
+ fa = (speinsn >> 16) & 0x1f;
+ fb = (speinsn >> 11) & 0x1f;
+ src = (speinsn >> 5) & 0x7;
+
+ vc.wp[0] = current->thread.evr[fc];
+ vc.wp[1] = regs->gpr[fc];
+ va.wp[0] = current->thread.evr[fa];
+ va.wp[1] = regs->gpr[fa];
+ vb.wp[0] = current->thread.evr[fb];
+ vb.wp[1] = regs->gpr[fb];
+
+ __FPU_FPSCR = mfspr(SPRN_SPEFSCR);
+
+#ifdef DEBUG
+ printk("speinsn:%08lx spefscr:%08lx\n", speinsn, __FPU_FPSCR);
+ printk("vc: %08x %08x\n", vc.wp[0], vc.wp[1]);
+ printk("va: %08x %08x\n", va.wp[0], va.wp[1]);
+ printk("vb: %08x %08x\n", vb.wp[0], vb.wp[1]);
+#endif
+
+ switch (src) {
+ case SPFP: {
+ FP_DECL_S(SA); FP_DECL_S(SB); FP_DECL_S(SR);
+
+ switch (type) {
+ case AB:
+ case XCR:
+ FP_UNPACK_SP(SA, va.wp + 1);
+ case XB:
+ FP_UNPACK_SP(SB, vb.wp + 1);
+ break;
+ case XA:
+ FP_UNPACK_SP(SA, va.wp + 1);
+ break;
+ }
+
+#ifdef DEBUG
+ printk("SA: %ld %08lx %ld (%ld)\n", SA_s, SA_f, SA_e, SA_c);
+ printk("SB: %ld %08lx %ld (%ld)\n", SB_s, SB_f, SB_e, SB_c);
+#endif
+
+ switch (func) {
+ case EFSABS:
+ vc.wp[1] = va.wp[1] & ~SIGN_BIT_S;
+ goto update_regs;
+
+ case EFSNABS:
+ vc.wp[1] = va.wp[1] | SIGN_BIT_S;
+ goto update_regs;
+
+ case EFSNEG:
+ vc.wp[1] = va.wp[1] ^ SIGN_BIT_S;
+ goto update_regs;
+
+ case EFSADD:
+ FP_ADD_S(SR, SA, SB);
+ goto pack_s;
+
+ case EFSSUB:
+ FP_SUB_S(SR, SA, SB);
+ goto pack_s;
+
+ case EFSMUL:
+ FP_MUL_S(SR, SA, SB);
+ goto pack_s;
+
+ case EFSDIV:
+ FP_DIV_S(SR, SA, SB);
+ goto pack_s;
+
+ case EFSCMPEQ:
+ cmp = 0;
+ goto cmp_s;
+
+ case EFSCMPGT:
+ cmp = 1;
+ goto cmp_s;
+
+ case EFSCMPLT:
+ cmp = -1;
+ goto cmp_s;
+
+ case EFSCTSF:
+ case EFSCTUF:
+ if (!((vb.wp[1] >> 23) == 0xff && ((vb.wp[1] & 0x7fffff) > 0))) {
+ /* NaN */
+ if (((vb.wp[1] >> 23) & 0xff) == 0) {
+ /* denorm */
+ vc.wp[1] = 0x0;
+ } else if ((vb.wp[1] >> 31) == 0) {
+ /* positive normal */
+ vc.wp[1] = (func == EFSCTSF) ?
+ 0x7fffffff : 0xffffffff;
+ } else { /* negative normal */
+ vc.wp[1] = (func == EFSCTSF) ?
+ 0x80000000 : 0x0;
+ }
+ } else { /* rB is NaN */
+ vc.wp[1] = 0x0;
+ }
+ goto update_regs;
+
+ case EFSCFD: {
+ FP_DECL_D(DB);
+ FP_CLEAR_EXCEPTIONS;
+ FP_UNPACK_DP(DB, vb.dp);
+#ifdef DEBUG
+ printk("DB: %ld %08lx %08lx %ld (%ld)\n",
+ DB_s, DB_f1, DB_f0, DB_e, DB_c);
+#endif
+ FP_CONV(S, D, 1, 2, SR, DB);
+ goto pack_s;
+ }
+
+ case EFSCTSI:
+ case EFSCTSIZ:
+ case EFSCTUI:
+ case EFSCTUIZ:
+ if (func & 0x4) {
+ _FP_ROUND(1, SB);
+ } else {
+ _FP_ROUND_ZERO(1, SB);
+ }
+ FP_TO_INT_S(vc.wp[1], SB, 32, ((func & 0x3) != 0));
+ goto update_regs;
+
+ default:
+ goto illegal;
+ }
+ break;
+
+pack_s:
+#ifdef DEBUG
+ printk("SR: %ld %08lx %ld (%ld)\n", SR_s, SR_f, SR_e, SR_c);
+#endif
+ FP_PACK_SP(vc.wp + 1, SR);
+ goto update_regs;
+
+cmp_s:
+ FP_CMP_S(IR, SA, SB, 3);
+ if (IR == 3 && (FP_ISSIGNAN_S(SA) || FP_ISSIGNAN_S(SB)))
+ FP_SET_EXCEPTION(FP_EX_INVALID);
+ if (IR == cmp) {
+ IR = 0x4;
+ } else {
+ IR = 0;
+ }
+ goto update_ccr;
+ }
+
+ case DPFP: {
+ FP_DECL_D(DA); FP_DECL_D(DB); FP_DECL_D(DR);
+
+ switch (type) {
+ case AB:
+ case XCR:
+ FP_UNPACK_DP(DA, va.dp);
+ case XB:
+ FP_UNPACK_DP(DB, vb.dp);
+ break;
+ case XA:
+ FP_UNPACK_DP(DA, va.dp);
+ break;
+ }
+
+#ifdef DEBUG
+ printk("DA: %ld %08lx %08lx %ld (%ld)\n",
+ DA_s, DA_f1, DA_f0, DA_e, DA_c);
+ printk("DB: %ld %08lx %08lx %ld (%ld)\n",
+ DB_s, DB_f1, DB_f0, DB_e, DB_c);
+#endif
+
+ switch (func) {
+ case EFDABS:
+ vc.dp[0] = va.dp[0] & ~SIGN_BIT_D;
+ goto update_regs;
+
+ case EFDNABS:
+ vc.dp[0] = va.dp[0] | SIGN_BIT_D;
+ goto update_regs;
+
+ case EFDNEG:
+ vc.dp[0] = va.dp[0] ^ SIGN_BIT_D;
+ goto update_regs;
+
+ case EFDADD:
+ FP_ADD_D(DR, DA, DB);
+ goto pack_d;
+
+ case EFDSUB:
+ FP_SUB_D(DR, DA, DB);
+ goto pack_d;
+
+ case EFDMUL:
+ FP_MUL_D(DR, DA, DB);
+ goto pack_d;
+
+ case EFDDIV:
+ FP_DIV_D(DR, DA, DB);
+ goto pack_d;
+
+ case EFDCMPEQ:
+ cmp = 0;
+ goto cmp_d;
+
+ case EFDCMPGT:
+ cmp = 1;
+ goto cmp_d;
+
+ case EFDCMPLT:
+ cmp = -1;
+ goto cmp_d;
+
+ case EFDCTSF:
+ case EFDCTUF:
+ if (!((vb.wp[0] >> 20) == 0x7ff &&
+ ((vb.wp[0] & 0xfffff) > 0 || (vb.wp[1] > 0)))) {
+ /* not a NaN */
+ if (((vb.wp[0] >> 20) & 0x7ff) == 0) {
+ /* denorm */
+ vc.wp[1] = 0x0;
+ } else if ((vb.wp[0] >> 31) == 0) {
+ /* positive normal */
+ vc.wp[1] = (func == EFDCTSF) ?
+ 0x7fffffff : 0xffffffff;
+ } else { /* negative normal */
+ vc.wp[1] = (func == EFDCTSF) ?
+ 0x80000000 : 0x0;
+ }
+ } else { /* NaN */
+ vc.wp[1] = 0x0;
+ }
+ goto update_regs;
+
+ case EFDCFS: {
+ FP_DECL_S(SB);
+ FP_CLEAR_EXCEPTIONS;
+ FP_UNPACK_SP(SB, vb.wp + 1);
+#ifdef DEBUG
+ printk("SB: %ld %08lx %ld (%ld)\n",
+ SB_s, SB_f, SB_e, SB_c);
+#endif
+ FP_CONV(D, S, 2, 1, DR, SB);
+ goto pack_d;
+ }
+
+ case EFDCTUIDZ:
+ case EFDCTSIDZ:
+ _FP_ROUND_ZERO(2, DB);
+ FP_TO_INT_D(vc.dp[0], DB, 64, ((func & 0x1) == 0));
+ goto update_regs;
+
+ case EFDCTUI:
+ case EFDCTSI:
+ case EFDCTUIZ:
+ case EFDCTSIZ:
+ if (func & 0x4) {
+ _FP_ROUND(2, DB);
+ } else {
+ _FP_ROUND_ZERO(2, DB);
+ }
+ FP_TO_INT_D(vc.wp[1], DB, 32, ((func & 0x3) != 0));
+ goto update_regs;
+
+ default:
+ goto illegal;
+ }
+ break;
+
+pack_d:
+#ifdef DEBUG
+ printk("DR: %ld %08lx %08lx %ld (%ld)\n",
+ DR_s, DR_f1, DR_f0, DR_e, DR_c);
+#endif
+ FP_PACK_DP(vc.dp, DR);
+ goto update_regs;
+
+cmp_d:
+ FP_CMP_D(IR, DA, DB, 3);
+ if (IR == 3 && (FP_ISSIGNAN_D(DA) || FP_ISSIGNAN_D(DB)))
+ FP_SET_EXCEPTION(FP_EX_INVALID);
+ if (IR == cmp) {
+ IR = 0x4;
+ } else {
+ IR = 0;
+ }
+ goto update_ccr;
+
+ }
+
+ case VCT: {
+ FP_DECL_S(SA0); FP_DECL_S(SB0); FP_DECL_S(SR0);
+ FP_DECL_S(SA1); FP_DECL_S(SB1); FP_DECL_S(SR1);
+ int IR0, IR1;
+
+ switch (type) {
+ case AB:
+ case XCR:
+ FP_UNPACK_SP(SA0, va.wp);
+ FP_UNPACK_SP(SA1, va.wp + 1);
+ case XB:
+ FP_UNPACK_SP(SB0, vb.wp);
+ FP_UNPACK_SP(SB1, vb.wp + 1);
+ break;
+ case XA:
+ FP_UNPACK_SP(SA0, va.wp);
+ FP_UNPACK_SP(SA1, va.wp + 1);
+ break;
+ }
+
+#ifdef DEBUG
+ printk("SA0: %ld %08lx %ld (%ld)\n", SA0_s, SA0_f, SA0_e, SA0_c);
+ printk("SA1: %ld %08lx %ld (%ld)\n", SA1_s, SA1_f, SA1_e, SA1_c);
+ printk("SB0: %ld %08lx %ld (%ld)\n", SB0_s, SB0_f, SB0_e, SB0_c);
+ printk("SB1: %ld %08lx %ld (%ld)\n", SB1_s, SB1_f, SB1_e, SB1_c);
+#endif
+
+ switch (func) {
+ case EVFSABS:
+ vc.wp[0] = va.wp[0] & ~SIGN_BIT_S;
+ vc.wp[1] = va.wp[1] & ~SIGN_BIT_S;
+ goto update_regs;
+
+ case EVFSNABS:
+ vc.wp[0] = va.wp[0] | SIGN_BIT_S;
+ vc.wp[1] = va.wp[1] | SIGN_BIT_S;
+ goto update_regs;
+
+ case EVFSNEG:
+ vc.wp[0] = va.wp[0] ^ SIGN_BIT_S;
+ vc.wp[1] = va.wp[1] ^ SIGN_BIT_S;
+ goto update_regs;
+
+ case EVFSADD:
+ FP_ADD_S(SR0, SA0, SB0);
+ FP_ADD_S(SR1, SA1, SB1);
+ goto pack_vs;
+
+ case EVFSSUB:
+ FP_SUB_S(SR0, SA0, SB0);
+ FP_SUB_S(SR1, SA1, SB1);
+ goto pack_vs;
+
+ case EVFSMUL:
+ FP_MUL_S(SR0, SA0, SB0);
+ FP_MUL_S(SR1, SA1, SB1);
+ goto pack_vs;
+
+ case EVFSDIV:
+ FP_DIV_S(SR0, SA0, SB0);
+ FP_DIV_S(SR1, SA1, SB1);
+ goto pack_vs;
+
+ case EVFSCMPEQ:
+ cmp = 0;
+ goto cmp_vs;
+
+ case EVFSCMPGT:
+ cmp = 1;
+ goto cmp_vs;
+
+ case EVFSCMPLT:
+ cmp = -1;
+ goto cmp_vs;
+
+ case EVFSCTSF:
+ __asm__ __volatile__ ("mtspr 512, %4\n"
+ "efsctsf %0, %2\n"
+ "efsctsf %1, %3\n"
+ : "=r" (vc.wp[0]), "=r" (vc.wp[1])
+ : "r" (vb.wp[0]), "r" (vb.wp[1]), "r" (0));
+ goto update_regs;
+
+ case EVFSCTUF:
+ __asm__ __volatile__ ("mtspr 512, %4\n"
+ "efsctuf %0, %2\n"
+ "efsctuf %1, %3\n"
+ : "=r" (vc.wp[0]), "=r" (vc.wp[1])
+ : "r" (vb.wp[0]), "r" (vb.wp[1]), "r" (0));
+ goto update_regs;
+
+ case EVFSCTUI:
+ case EVFSCTSI:
+ case EVFSCTUIZ:
+ case EVFSCTSIZ:
+ if (func & 0x4) {
+ _FP_ROUND(1, SB0);
+ _FP_ROUND(1, SB1);
+ } else {
+ _FP_ROUND_ZERO(1, SB0);
+ _FP_ROUND_ZERO(1, SB1);
+ }
+ FP_TO_INT_S(vc.wp[0], SB0, 32, ((func & 0x3) != 0));
+ FP_TO_INT_S(vc.wp[1], SB1, 32, ((func & 0x3) != 0));
+ goto update_regs;
+
+ default:
+ goto illegal;
+ }
+ break;
+
+pack_vs:
+#ifdef DEBUG
+ printk("SR0: %ld %08lx %ld (%ld)\n", SR0_s, SR0_f, SR0_e, SR0_c);
+ printk("SR1: %ld %08lx %ld (%ld)\n", SR1_s, SR1_f, SR1_e, SR1_c);
+#endif
+ FP_PACK_SP(vc.wp, SR0);
+ FP_PACK_SP(vc.wp + 1, SR1);
+ goto update_regs;
+
+cmp_vs:
+ {
+ int ch, cl;
+
+ FP_CMP_S(IR0, SA0, SB0, 3);
+ FP_CMP_S(IR1, SA1, SB1, 3);
+ if (IR0 == 3 && (FP_ISSIGNAN_S(SA0) || FP_ISSIGNAN_S(SB0)))
+ FP_SET_EXCEPTION(FP_EX_INVALID);
+ if (IR1 == 3 && (FP_ISSIGNAN_S(SA1) || FP_ISSIGNAN_S(SB1)))
+ FP_SET_EXCEPTION(FP_EX_INVALID);
+ ch = (IR0 == cmp) ? 1 : 0;
+ cl = (IR1 == cmp) ? 1 : 0;
+ IR = (ch << 3) | (cl << 2) | ((ch | cl) << 1) |
+ ((ch & cl) << 0);
+ goto update_ccr;
+ }
+ }
+ default:
+ return -EINVAL;
+ }
+
+update_ccr:
+ regs->ccr &= ~(15 << ((7 - ((speinsn >> 23) & 0x7)) << 2));
+ regs->ccr |= (IR << ((7 - ((speinsn >> 23) & 0x7)) << 2));
+
+update_regs:
+ __FPU_FPSCR &= ~FP_EX_MASK;
+ __FPU_FPSCR |= (FP_CUR_EXCEPTIONS & FP_EX_MASK);
+ mtspr(SPRN_SPEFSCR, __FPU_FPSCR);
+
+ current->thread.evr[fc] = vc.wp[0];
+ regs->gpr[fc] = vc.wp[1];
+
+#ifdef DEBUG
+ printk("ccr = %08lx\n", regs->ccr);
+ printk("cur exceptions = %08x spefscr = %08lx\n",
+ FP_CUR_EXCEPTIONS, __FPU_FPSCR);
+ printk("vc: %08x %08x\n", vc.wp[0], vc.wp[1]);
+ printk("va: %08x %08x\n", va.wp[0], va.wp[1]);
+ printk("vb: %08x %08x\n", vb.wp[0], vb.wp[1]);
+#endif
+
+ return 0;
+
+illegal:
+ printk(KERN_ERR "\nOoops! IEEE-754 compliance handler encountered un-supported instruction.\ninst code: %08lx\n", speinsn);
+ return -ENOSYS;
+}
+
+int speround_handler(struct pt_regs *regs)
+{
+ union dw_union fgpr;
+ int s_lo, s_hi;
+ unsigned long speinsn, type, fc;
+
+ if (get_user(speinsn, (unsigned int __user *) regs->nip))
+ return -EFAULT;
+ if ((speinsn >> 26) != 4)
+ return -EINVAL; /* not an spe instruction */
+
+ type = insn_type(speinsn & 0x7ff);
+ if (type == XCR) return -ENOSYS;
+
+ fc = (speinsn >> 21) & 0x1f;
+ s_lo = regs->gpr[fc] & SIGN_BIT_S;
+ s_hi = current->thread.evr[fc] & SIGN_BIT_S;
+ fgpr.wp[0] = current->thread.evr[fc];
+ fgpr.wp[1] = regs->gpr[fc];
+
+ __FPU_FPSCR = mfspr(SPRN_SPEFSCR);
+
+ switch ((speinsn >> 5) & 0x7) {
+ /* Since SPE instructions on E500 core can handle round to nearest
+ * and round toward zero with IEEE-754 complied, we just need
+ * to handle round toward +Inf and round toward -Inf by software.
+ */
+ case SPFP:
+ if ((FP_ROUNDMODE) == FP_RND_PINF) {
+ if (!s_lo) fgpr.wp[1]++; /* Z > 0, choose Z1 */
+ } else { /* round to -Inf */
+ if (s_lo) fgpr.wp[1]++; /* Z < 0, choose Z2 */
+ }
+ break;
+
+ case DPFP:
+ if (FP_ROUNDMODE == FP_RND_PINF) {
+ if (!s_hi) fgpr.dp[0]++; /* Z > 0, choose Z1 */
+ } else { /* round to -Inf */
+ if (s_hi) fgpr.dp[0]++; /* Z < 0, choose Z2 */
+ }
+ break;
+
+ case VCT:
+ if (FP_ROUNDMODE == FP_RND_PINF) {
+ if (!s_lo) fgpr.wp[1]++; /* Z_low > 0, choose Z1 */
+ if (!s_hi) fgpr.wp[0]++; /* Z_high word > 0, choose Z1 */
+ } else { /* round to -Inf */
+ if (s_lo) fgpr.wp[1]++; /* Z_low < 0, choose Z2 */
+ if (s_hi) fgpr.wp[0]++; /* Z_high < 0, choose Z2 */
+ }
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ current->thread.evr[fc] = fgpr.wp[0];
+ regs->gpr[fc] = fgpr.wp[1];
+
+ return 0;
+}
diff --git a/arch/powerpc/mm/Makefile b/arch/powerpc/mm/Makefile
index e7392b45a5ef6ae82ad68727188e257990d407ea..953cc4a1cde56061bccdc347ff0e347930eb052b 100644
--- a/arch/powerpc/mm/Makefile
+++ b/arch/powerpc/mm/Makefile
@@ -6,17 +6,19 @@ ifeq ($(CONFIG_PPC64),y)
EXTRA_CFLAGS += -mno-minimal-toc
endif
-obj-y := fault.o mem.o \
+obj-y := fault.o mem.o pgtable.o \
init_$(CONFIG_WORD_SIZE).o \
- pgtable_$(CONFIG_WORD_SIZE).o \
- mmu_context_$(CONFIG_WORD_SIZE).o
+ pgtable_$(CONFIG_WORD_SIZE).o
+obj-$(CONFIG_PPC_MMU_NOHASH) += mmu_context_nohash.o tlb_nohash.o \
+ tlb_nohash_low.o
hash-$(CONFIG_PPC_NATIVE) := hash_native_64.o
obj-$(CONFIG_PPC64) += hash_utils_64.o \
slb_low.o slb.o stab.o \
gup.o mmap.o $(hash-y)
obj-$(CONFIG_PPC_STD_MMU_32) += ppc_mmu_32.o
obj-$(CONFIG_PPC_STD_MMU) += hash_low_$(CONFIG_WORD_SIZE).o \
- tlb_$(CONFIG_WORD_SIZE).o
+ tlb_hash$(CONFIG_WORD_SIZE).o \
+ mmu_context_hash$(CONFIG_WORD_SIZE).o
obj-$(CONFIG_40x) += 40x_mmu.o
obj-$(CONFIG_44x) += 44x_mmu.o
obj-$(CONFIG_FSL_BOOKE) += fsl_booke_mmu.o
diff --git a/arch/powerpc/mm/fault.c b/arch/powerpc/mm/fault.c
index 565b7a237c847929e885eb5597fe4cdb14746cf3..91c7b8636b8a751ba160a7791df929be25d32543 100644
--- a/arch/powerpc/mm/fault.c
+++ b/arch/powerpc/mm/fault.c
@@ -30,6 +30,7 @@
#include
#include
+#include
#include
#include
#include
@@ -283,7 +284,7 @@ good_area:
}
pte_update(ptep, 0, _PAGE_HWEXEC |
_PAGE_ACCESSED);
- _tlbie(address, mm->context.id);
+ local_flush_tlb_page(vma, address);
pte_unmap_unlock(ptep, ptl);
up_read(&mm->mmap_sem);
return 0;
@@ -318,9 +319,16 @@ good_area:
goto do_sigbus;
BUG();
}
- if (ret & VM_FAULT_MAJOR)
+ if (ret & VM_FAULT_MAJOR) {
current->maj_flt++;
- else
+#ifdef CONFIG_PPC_SMLPAR
+ if (firmware_has_feature(FW_FEATURE_CMO)) {
+ preempt_disable();
+ get_lppaca()->page_ins += (1 << PAGE_FACTOR);
+ preempt_enable();
+ }
+#endif
+ } else
current->min_flt++;
up_read(&mm->mmap_sem);
return 0;
@@ -339,7 +347,7 @@ bad_area_nosemaphore:
&& printk_ratelimit())
printk(KERN_CRIT "kernel tried to execute NX-protected"
" page (%lx) - exploit attempt? (uid: %d)\n",
- address, current->uid);
+ address, current_uid());
return SIGSEGV;
diff --git a/arch/powerpc/mm/hash_low_32.S b/arch/powerpc/mm/hash_low_32.S
index 7bffb70b9fe25cd71750428578ba961561412ee6..67850ec9feb36e04ae26ddb6acef20709ff6db16 100644
--- a/arch/powerpc/mm/hash_low_32.S
+++ b/arch/powerpc/mm/hash_low_32.S
@@ -35,36 +35,6 @@ mmu_hash_lock:
.space 4
#endif /* CONFIG_SMP */
-/*
- * Sync CPUs with hash_page taking & releasing the hash
- * table lock
- */
-#ifdef CONFIG_SMP
- .text
-_GLOBAL(hash_page_sync)
- mfmsr r10
- rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */
- mtmsr r0
- lis r8,mmu_hash_lock@h
- ori r8,r8,mmu_hash_lock@l
- lis r0,0x0fff
- b 10f
-11: lwz r6,0(r8)
- cmpwi 0,r6,0
- bne 11b
-10: lwarx r6,0,r8
- cmpwi 0,r6,0
- bne- 11b
- stwcx. r0,0,r8
- bne- 10b
- isync
- eieio
- li r0,0
- stw r0,0(r8)
- mtmsr r10
- blr
-#endif /* CONFIG_SMP */
-
/*
* Load a PTE into the hash table, if possible.
* The address is in r4, and r3 contains an access flag:
@@ -353,8 +323,8 @@ _GLOBAL(create_hpte)
ori r8,r8,0xe14 /* clear out reserved bits and M */
andc r8,r5,r8 /* PP = user? (rw&dirty? 2: 3): 0 */
BEGIN_FTR_SECTION
- ori r8,r8,_PAGE_COHERENT /* set M (coherence required) */
-END_FTR_SECTION_IFSET(CPU_FTR_NEED_COHERENT)
+ rlwinm r8,r8,0,~_PAGE_COHERENT /* clear M (coherence not required) */
+END_FTR_SECTION_IFCLR(CPU_FTR_NEED_COHERENT)
#ifdef CONFIG_PTE_64BIT
/* Put the XPN bits into the PTE */
rlwimi r8,r10,8,20,22
@@ -663,3 +633,80 @@ _GLOBAL(flush_hash_patch_B)
SYNC_601
isync
blr
+
+/*
+ * Flush an entry from the TLB
+ */
+_GLOBAL(_tlbie)
+#ifdef CONFIG_SMP
+ rlwinm r8,r1,0,0,(31-THREAD_SHIFT)
+ lwz r8,TI_CPU(r8)
+ oris r8,r8,11
+ mfmsr r10
+ SYNC
+ rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */
+ rlwinm r0,r0,0,28,26 /* clear DR */
+ mtmsr r0
+ SYNC_601
+ isync
+ lis r9,mmu_hash_lock@h
+ ori r9,r9,mmu_hash_lock@l
+ tophys(r9,r9)
+10: lwarx r7,0,r9
+ cmpwi 0,r7,0
+ bne- 10b
+ stwcx. r8,0,r9
+ bne- 10b
+ eieio
+ tlbie r3
+ sync
+ TLBSYNC
+ li r0,0
+ stw r0,0(r9) /* clear mmu_hash_lock */
+ mtmsr r10
+ SYNC_601
+ isync
+#else /* CONFIG_SMP */
+ tlbie r3
+ sync
+#endif /* CONFIG_SMP */
+ blr
+
+/*
+ * Flush the entire TLB. 603/603e only
+ */
+_GLOBAL(_tlbia)
+#if defined(CONFIG_SMP)
+ rlwinm r8,r1,0,0,(31-THREAD_SHIFT)
+ lwz r8,TI_CPU(r8)
+ oris r8,r8,10
+ mfmsr r10
+ SYNC
+ rlwinm r0,r10,0,17,15 /* clear bit 16 (MSR_EE) */
+ rlwinm r0,r0,0,28,26 /* clear DR */
+ mtmsr r0
+ SYNC_601
+ isync
+ lis r9,mmu_hash_lock@h
+ ori r9,r9,mmu_hash_lock@l
+ tophys(r9,r9)
+10: lwarx r7,0,r9
+ cmpwi 0,r7,0
+ bne- 10b
+ stwcx. r8,0,r9
+ bne- 10b
+ sync
+ tlbia
+ sync
+ TLBSYNC
+ li r0,0
+ stw r0,0(r9) /* clear mmu_hash_lock */
+ mtmsr r10
+ SYNC_601
+ isync
+#else /* CONFIG_SMP */
+ sync
+ tlbia
+ sync
+#endif /* CONFIG_SMP */
+ blr
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index f0c3b88d50fa5a5f98847bd1914be1881885af9d..201c7a5486cb3f815e89ec8e54966b5f29f6feb0 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -53,8 +53,7 @@ unsigned int mmu_huge_psizes[MMU_PAGE_COUNT] = { }; /* initialize all to 0 */
/* Subtract one from array size because we don't need a cache for 4K since
* is not a huge page size */
-#define huge_pgtable_cache(psize) (pgtable_cache[HUGEPTE_CACHE_NUM \
- + psize-1])
+#define HUGE_PGTABLE_INDEX(psize) (HUGEPTE_CACHE_NUM + psize - 1)
#define HUGEPTE_CACHE_NAME(psize) (huge_pgtable_cache_name[psize])
static const char *huge_pgtable_cache_name[MMU_PAGE_COUNT] = {
@@ -113,7 +112,7 @@ static inline pte_t *hugepte_offset(hugepd_t *hpdp, unsigned long addr,
static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
unsigned long address, unsigned int psize)
{
- pte_t *new = kmem_cache_zalloc(huge_pgtable_cache(psize),
+ pte_t *new = kmem_cache_zalloc(pgtable_cache[HUGE_PGTABLE_INDEX(psize)],
GFP_KERNEL|__GFP_REPEAT);
if (! new)
@@ -121,7 +120,7 @@ static int __hugepte_alloc(struct mm_struct *mm, hugepd_t *hpdp,
spin_lock(&mm->page_table_lock);
if (!hugepd_none(*hpdp))
- kmem_cache_free(huge_pgtable_cache(psize), new);
+ kmem_cache_free(pgtable_cache[HUGE_PGTABLE_INDEX(psize)], new);
else
hpdp->pd = (unsigned long)new | HUGEPD_OK;
spin_unlock(&mm->page_table_lock);
@@ -763,13 +762,14 @@ static int __init hugetlbpage_init(void)
for (psize = 0; psize < MMU_PAGE_COUNT; ++psize) {
if (mmu_huge_psizes[psize]) {
- huge_pgtable_cache(psize) = kmem_cache_create(
- HUGEPTE_CACHE_NAME(psize),
- HUGEPTE_TABLE_SIZE(psize),
- HUGEPTE_TABLE_SIZE(psize),
- 0,
- NULL);
- if (!huge_pgtable_cache(psize))
+ pgtable_cache[HUGE_PGTABLE_INDEX(psize)] =
+ kmem_cache_create(
+ HUGEPTE_CACHE_NAME(psize),
+ HUGEPTE_TABLE_SIZE(psize),
+ HUGEPTE_TABLE_SIZE(psize),
+ 0,
+ NULL);
+ if (!pgtable_cache[HUGE_PGTABLE_INDEX(psize)])
panic("hugetlbpage_init(): could not create %s"\
"\n", HUGEPTE_CACHE_NAME(psize));
}
diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c
index 388ceda632f346fa5314c4254512807b414802b3..666a5e8a5be1d582685d20b23ce5ec045f83cd4d 100644
--- a/arch/powerpc/mm/init_32.c
+++ b/arch/powerpc/mm/init_32.c
@@ -35,7 +35,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -49,7 +48,7 @@
#if defined(CONFIG_KERNEL_START_BOOL) || defined(CONFIG_LOWMEM_SIZE_BOOL)
/* The ammount of lowmem must be within 0xF0000000 - KERNELBASE. */
-#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - KERNELBASE))
+#if (CONFIG_LOWMEM_SIZE > (0xF0000000 - PAGE_OFFSET))
#error "You must adjust CONFIG_LOWMEM_SIZE or CONFIG_START_KERNEL"
#endif
#endif
@@ -180,9 +179,6 @@ void __init MMU_init(void)
if (ppc_md.progress)
ppc_md.progress("MMU:setio", 0x302);
- /* Initialize the context management stuff */
- mmu_context_init();
-
if (ppc_md.progress)
ppc_md.progress("MMU:exit", 0x211);
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index b9e1a1da6e52a35f2276c798b71e717bb224ec88..53b06ebb3f2f7cad0a9dd690f30d0582184e8042 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -102,8 +102,8 @@ pgprot_t phys_mem_access_prot(struct file *file, unsigned long pfn,
return ppc_md.phys_mem_access_prot(file, pfn, size, vma_prot);
if (!page_is_ram(pfn))
- vma_prot = __pgprot(pgprot_val(vma_prot)
- | _PAGE_GUARDED | _PAGE_NO_CACHE);
+ vma_prot = pgprot_noncached(vma_prot);
+
return vma_prot;
}
EXPORT_SYMBOL(phys_mem_access_prot);
@@ -488,7 +488,7 @@ void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
* we invalidate the TLB here, thus avoiding dcbst
* misbehaviour.
*/
- _tlbie(address, 0 /* 8xx doesn't care about PID */);
+ _tlbil_va(address, 0 /* 8xx doesn't care about PID */);
#endif
/* The _PAGE_USER test should really be _PAGE_EXEC, but
* older glibc versions execute some code from no-exec
diff --git a/arch/powerpc/mm/mmu_context_32.c b/arch/powerpc/mm/mmu_context_32.c
deleted file mode 100644
index cc32ba41d9003f7340b3d31b08c42096f7fa65c1..0000000000000000000000000000000000000000
--- a/arch/powerpc/mm/mmu_context_32.c
+++ /dev/null
@@ -1,84 +0,0 @@
-/*
- * This file contains the routines for handling the MMU on those
- * PowerPC implementations where the MMU substantially follows the
- * architecture specification. This includes the 6xx, 7xx, 7xxx,
- * 8260, and POWER3 implementations but excludes the 8xx and 4xx.
- * -- paulus
- *
- * Derived from arch/ppc/mm/init.c:
- * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
- *
- * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
- * and Cort Dougan (PReP) (cort@cs.nmt.edu)
- * Copyright (C) 1996 Paul Mackerras
- *
- * Derived from "arch/i386/mm/init.c"
- * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include
-#include
-
-#include
-#include
-
-unsigned long next_mmu_context;
-unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
-#ifdef FEW_CONTEXTS
-atomic_t nr_free_contexts;
-struct mm_struct *context_mm[LAST_CONTEXT+1];
-void steal_context(void);
-#endif /* FEW_CONTEXTS */
-
-/*
- * Initialize the context management stuff.
- */
-void __init
-mmu_context_init(void)
-{
- /*
- * Some processors have too few contexts to reserve one for
- * init_mm, and require using context 0 for a normal task.
- * Other processors reserve the use of context zero for the kernel.
- * This code assumes FIRST_CONTEXT < 32.
- */
- context_map[0] = (1 << FIRST_CONTEXT) - 1;
- next_mmu_context = FIRST_CONTEXT;
-#ifdef FEW_CONTEXTS
- atomic_set(&nr_free_contexts, LAST_CONTEXT - FIRST_CONTEXT + 1);
-#endif /* FEW_CONTEXTS */
-}
-
-#ifdef FEW_CONTEXTS
-/*
- * Steal a context from a task that has one at the moment.
- * This is only used on 8xx and 4xx and we presently assume that
- * they don't do SMP. If they do then this will have to check
- * whether the MM we steal is in use.
- * We also assume that this is only used on systems that don't
- * use an MMU hash table - this is true for 8xx and 4xx.
- * This isn't an LRU system, it just frees up each context in
- * turn (sort-of pseudo-random replacement :). This would be the
- * place to implement an LRU scheme if anyone was motivated to do it.
- * -- paulus
- */
-void
-steal_context(void)
-{
- struct mm_struct *mm;
-
- /* free up context `next_mmu_context' */
- /* if we shouldn't free context 0, don't... */
- if (next_mmu_context < FIRST_CONTEXT)
- next_mmu_context = FIRST_CONTEXT;
- mm = context_mm[next_mmu_context];
- flush_tlb_mm(mm);
- destroy_context(mm);
-}
-#endif /* FEW_CONTEXTS */
diff --git a/arch/powerpc/mm/mmu_context_hash32.c b/arch/powerpc/mm/mmu_context_hash32.c
new file mode 100644
index 0000000000000000000000000000000000000000..0dfba2bf7f3189e0fd93c3168ad769a4968a6522
--- /dev/null
+++ b/arch/powerpc/mm/mmu_context_hash32.c
@@ -0,0 +1,103 @@
+/*
+ * This file contains the routines for handling the MMU on those
+ * PowerPC implementations where the MMU substantially follows the
+ * architecture specification. This includes the 6xx, 7xx, 7xxx,
+ * 8260, and POWER3 implementations but excludes the 8xx and 4xx.
+ * -- paulus
+ *
+ * Derived from arch/ppc/mm/init.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include
+#include
+
+#include
+#include
+
+/*
+ * On 32-bit PowerPC 6xx/7xx/7xxx CPUs, we use a set of 16 VSIDs
+ * (virtual segment identifiers) for each context. Although the
+ * hardware supports 24-bit VSIDs, and thus >1 million contexts,
+ * we only use 32,768 of them. That is ample, since there can be
+ * at most around 30,000 tasks in the system anyway, and it means
+ * that we can use a bitmap to indicate which contexts are in use.
+ * Using a bitmap means that we entirely avoid all of the problems
+ * that we used to have when the context number overflowed,
+ * particularly on SMP systems.
+ * -- paulus.
+ */
+#define NO_CONTEXT ((unsigned long) -1)
+#define LAST_CONTEXT 32767
+#define FIRST_CONTEXT 1
+
+/*
+ * This function defines the mapping from contexts to VSIDs (virtual
+ * segment IDs). We use a skew on both the context and the high 4 bits
+ * of the 32-bit virtual address (the "effective segment ID") in order
+ * to spread out the entries in the MMU hash table. Note, if this
+ * function is changed then arch/ppc/mm/hashtable.S will have to be
+ * changed to correspond.
+ *
+ *
+ * CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
+ * & 0xffffff)
+ */
+
+static unsigned long next_mmu_context;
+static unsigned long context_map[LAST_CONTEXT / BITS_PER_LONG + 1];
+
+
+/*
+ * Set up the context for a new address space.
+ */
+int init_new_context(struct task_struct *t, struct mm_struct *mm)
+{
+ unsigned long ctx = next_mmu_context;
+
+ while (test_and_set_bit(ctx, context_map)) {
+ ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
+ if (ctx > LAST_CONTEXT)
+ ctx = 0;
+ }
+ next_mmu_context = (ctx + 1) & LAST_CONTEXT;
+ mm->context.id = ctx;
+
+ return 0;
+}
+
+/*
+ * We're finished using the context for an address space.
+ */
+void destroy_context(struct mm_struct *mm)
+{
+ preempt_disable();
+ if (mm->context.id != NO_CONTEXT) {
+ clear_bit(mm->context.id, context_map);
+ mm->context.id = NO_CONTEXT;
+ }
+ preempt_enable();
+}
+
+/*
+ * Initialize the context management stuff.
+ */
+void __init mmu_context_init(void)
+{
+ /* Reserve context 0 for kernel use */
+ context_map[0] = (1 << FIRST_CONTEXT) - 1;
+ next_mmu_context = FIRST_CONTEXT;
+}
diff --git a/arch/powerpc/mm/mmu_context_64.c b/arch/powerpc/mm/mmu_context_hash64.c
similarity index 86%
rename from arch/powerpc/mm/mmu_context_64.c
rename to arch/powerpc/mm/mmu_context_hash64.c
index 1db38ba1f544e003a40c48a9b5652834bfa4bf27..dbeb86ac90cd79f01396eecbd72b98bc172253dc 100644
--- a/arch/powerpc/mm/mmu_context_64.c
+++ b/arch/powerpc/mm/mmu_context_hash64.c
@@ -24,6 +24,14 @@
static DEFINE_SPINLOCK(mmu_context_lock);
static DEFINE_IDR(mmu_context_idr);
+/*
+ * The proto-VSID space has 2^35 - 1 segments available for user mappings.
+ * Each segment contains 2^28 bytes. Each context maps 2^44 bytes,
+ * so we can support 2^19-1 contexts (19 == 35 + 28 - 44).
+ */
+#define NO_CONTEXT 0
+#define MAX_CONTEXT ((1UL << 19) - 1)
+
int init_new_context(struct task_struct *tsk, struct mm_struct *mm)
{
int index;
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
new file mode 100644
index 0000000000000000000000000000000000000000..52a0cfc38b6488eecd50374d56271f1fc3a83553
--- /dev/null
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -0,0 +1,397 @@
+/*
+ * This file contains the routines for handling the MMU on those
+ * PowerPC implementations where the MMU is not using the hash
+ * table, such as 8xx, 4xx, BookE's etc...
+ *
+ * Copyright 2008 Ben Herrenschmidt
+ * IBM Corp.
+ *
+ * Derived from previous arch/powerpc/mm/mmu_context.c
+ * and arch/powerpc/include/asm/mmu_context.h
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * TODO:
+ *
+ * - The global context lock will not scale very well
+ * - The maps should be dynamically allocated to allow for processors
+ * that support more PID bits at runtime
+ * - Implement flush_tlb_mm() by making the context stale and picking
+ * a new one
+ * - More aggressively clear stale map bits and maybe find some way to
+ * also clear mm->cpu_vm_mask bits when processes are migrated
+ */
+
+#undef DEBUG
+#define DEBUG_STEAL_ONLY
+#undef DEBUG_MAP_CONSISTENCY
+/*#define DEBUG_CLAMP_LAST_CONTEXT 15 */
+
+#include
+#include
+#include
+#include
+#include
+#include
+#include
+
+#include
+#include
+
+static unsigned int first_context, last_context;
+static unsigned int next_context, nr_free_contexts;
+static unsigned long *context_map;
+static unsigned long *stale_map[NR_CPUS];
+static struct mm_struct **context_mm;
+static spinlock_t context_lock = SPIN_LOCK_UNLOCKED;
+
+#define CTX_MAP_SIZE \
+ (sizeof(unsigned long) * (last_context / BITS_PER_LONG + 1))
+
+
+/* Steal a context from a task that has one at the moment.
+ *
+ * This is used when we are running out of available PID numbers
+ * on the processors.
+ *
+ * This isn't an LRU system, it just frees up each context in
+ * turn (sort-of pseudo-random replacement :). This would be the
+ * place to implement an LRU scheme if anyone was motivated to do it.
+ * -- paulus
+ *
+ * For context stealing, we use a slightly different approach for
+ * SMP and UP. Basically, the UP one is simpler and doesn't use
+ * the stale map as we can just flush the local CPU
+ * -- benh
+ */
+#ifdef CONFIG_SMP
+static unsigned int steal_context_smp(unsigned int id)
+{
+ struct mm_struct *mm;
+ unsigned int cpu, max;
+
+ again:
+ max = last_context - first_context;
+
+ /* Attempt to free next_context first and then loop until we manage */
+ while (max--) {
+ /* Pick up the victim mm */
+ mm = context_mm[id];
+
+ /* We have a candidate victim, check if it's active, on SMP
+ * we cannot steal active contexts
+ */
+ if (mm->context.active) {
+ id++;
+ if (id > last_context)
+ id = first_context;
+ continue;
+ }
+ pr_debug("[%d] steal context %d from mm @%p\n",
+ smp_processor_id(), id, mm);
+
+ /* Mark this mm has having no context anymore */
+ mm->context.id = MMU_NO_CONTEXT;
+
+ /* Mark it stale on all CPUs that used this mm */
+ for_each_cpu_mask_nr(cpu, mm->cpu_vm_mask)
+ __set_bit(id, stale_map[cpu]);
+ return id;
+ }
+
+ /* This will happen if you have more CPUs than available contexts,
+ * all we can do here is wait a bit and try again
+ */
+ spin_unlock(&context_lock);
+ cpu_relax();
+ spin_lock(&context_lock);
+ goto again;
+}
+#endif /* CONFIG_SMP */
+
+/* Note that this will also be called on SMP if all other CPUs are
+ * offlined, which means that it may be called for cpu != 0. For
+ * this to work, we somewhat assume that CPUs that are onlined
+ * come up with a fully clean TLB (or are cleaned when offlined)
+ */
+static unsigned int steal_context_up(unsigned int id)
+{
+ struct mm_struct *mm;
+ int cpu = smp_processor_id();
+
+ /* Pick up the victim mm */
+ mm = context_mm[id];
+
+ pr_debug("[%d] steal context %d from mm @%p\n", cpu, id, mm);
+
+ /* Mark this mm has having no context anymore */
+ mm->context.id = MMU_NO_CONTEXT;
+
+ /* Flush the TLB for that context */
+ local_flush_tlb_mm(mm);
+
+ /* XXX This clear should ultimately be part of local_flush_tlb_mm */
+ __clear_bit(id, stale_map[cpu]);
+
+ return id;
+}
+
+#ifdef DEBUG_MAP_CONSISTENCY
+static void context_check_map(void)
+{
+ unsigned int id, nrf, nact;
+
+ nrf = nact = 0;
+ for (id = first_context; id <= last_context; id++) {
+ int used = test_bit(id, context_map);
+ if (!used)
+ nrf++;
+ if (used != (context_mm[id] != NULL))
+ pr_err("MMU: Context %d is %s and MM is %p !\n",
+ id, used ? "used" : "free", context_mm[id]);
+ if (context_mm[id] != NULL)
+ nact += context_mm[id]->context.active;
+ }
+ if (nrf != nr_free_contexts) {
+ pr_err("MMU: Free context count out of sync ! (%d vs %d)\n",
+ nr_free_contexts, nrf);
+ nr_free_contexts = nrf;
+ }
+ if (nact > num_online_cpus())
+ pr_err("MMU: More active contexts than CPUs ! (%d vs %d)\n",
+ nact, num_online_cpus());
+ if (first_context > 0 && !test_bit(0, context_map))
+ pr_err("MMU: Context 0 has been freed !!!\n");
+}
+#else
+static void context_check_map(void) { }
+#endif
+
+void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
+{
+ unsigned int id, cpu = smp_processor_id();
+ unsigned long *map;
+
+ /* No lockless fast path .. yet */
+ spin_lock(&context_lock);
+
+#ifndef DEBUG_STEAL_ONLY
+ pr_debug("[%d] activating context for mm @%p, active=%d, id=%d\n",
+ cpu, next, next->context.active, next->context.id);
+#endif
+
+#ifdef CONFIG_SMP
+ /* Mark us active and the previous one not anymore */
+ next->context.active++;
+ if (prev) {
+#ifndef DEBUG_STEAL_ONLY
+ pr_debug(" old context %p active was: %d\n",
+ prev, prev->context.active);
+#endif
+ WARN_ON(prev->context.active < 1);
+ prev->context.active--;
+ }
+#endif /* CONFIG_SMP */
+
+ /* If we already have a valid assigned context, skip all that */
+ id = next->context.id;
+ if (likely(id != MMU_NO_CONTEXT))
+ goto ctxt_ok;
+
+ /* We really don't have a context, let's try to acquire one */
+ id = next_context;
+ if (id > last_context)
+ id = first_context;
+ map = context_map;
+
+ /* No more free contexts, let's try to steal one */
+ if (nr_free_contexts == 0) {
+#ifdef CONFIG_SMP
+ if (num_online_cpus() > 1) {
+ id = steal_context_smp(id);
+ goto stolen;
+ }
+#endif /* CONFIG_SMP */
+ id = steal_context_up(id);
+ goto stolen;
+ }
+ nr_free_contexts--;
+
+ /* We know there's at least one free context, try to find it */
+ while (__test_and_set_bit(id, map)) {
+ id = find_next_zero_bit(map, last_context+1, id);
+ if (id > last_context)
+ id = first_context;
+ }
+ stolen:
+ next_context = id + 1;
+ context_mm[id] = next;
+ next->context.id = id;
+
+#ifndef DEBUG_STEAL_ONLY
+ pr_debug("[%d] picked up new id %d, nrf is now %d\n",
+ cpu, id, nr_free_contexts);
+#endif
+
+ context_check_map();
+ ctxt_ok:
+
+ /* If that context got marked stale on this CPU, then flush the
+ * local TLB for it and unmark it before we use it
+ */
+ if (test_bit(id, stale_map[cpu])) {
+ pr_debug("[%d] flushing stale context %d for mm @%p !\n",
+ cpu, id, next);
+ local_flush_tlb_mm(next);
+
+ /* XXX This clear should ultimately be part of local_flush_tlb_mm */
+ __clear_bit(id, stale_map[cpu]);
+ }
+
+ /* Flick the MMU and release lock */
+ set_context(id, next->pgd);
+ spin_unlock(&context_lock);
+}
+
+/*
+ * Set up the context for a new address space.
+ */
+int init_new_context(struct task_struct *t, struct mm_struct *mm)
+{
+ mm->context.id = MMU_NO_CONTEXT;
+ mm->context.active = 0;
+
+ return 0;
+}
+
+/*
+ * We're finished using the context for an address space.
+ */
+void destroy_context(struct mm_struct *mm)
+{
+ unsigned int id;
+
+ if (mm->context.id == MMU_NO_CONTEXT)
+ return;
+
+ WARN_ON(mm->context.active != 0);
+
+ spin_lock(&context_lock);
+ id = mm->context.id;
+ if (id != MMU_NO_CONTEXT) {
+ __clear_bit(id, context_map);
+ mm->context.id = MMU_NO_CONTEXT;
+#ifdef DEBUG_MAP_CONSISTENCY
+ mm->context.active = 0;
+ context_mm[id] = NULL;
+#endif
+ nr_free_contexts++;
+ }
+ spin_unlock(&context_lock);
+}
+
+#ifdef CONFIG_SMP
+
+static int __cpuinit mmu_context_cpu_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (unsigned int)(long)hcpu;
+
+ /* We don't touch CPU 0 map, it's allocated at aboot and kept
+ * around forever
+ */
+ if (cpu == 0)
+ return NOTIFY_OK;
+
+ switch (action) {
+ case CPU_ONLINE:
+ case CPU_ONLINE_FROZEN:
+ pr_debug("MMU: Allocating stale context map for CPU %d\n", cpu);
+ stale_map[cpu] = kzalloc(CTX_MAP_SIZE, GFP_KERNEL);
+ break;
+#ifdef CONFIG_HOTPLUG_CPU
+ case CPU_DEAD:
+ case CPU_DEAD_FROZEN:
+ pr_debug("MMU: Freeing stale context map for CPU %d\n", cpu);
+ kfree(stale_map[cpu]);
+ stale_map[cpu] = NULL;
+ break;
+#endif
+ }
+ return NOTIFY_OK;
+}
+
+static struct notifier_block __cpuinitdata mmu_context_cpu_nb = {
+ .notifier_call = mmu_context_cpu_notify,
+};
+
+#endif /* CONFIG_SMP */
+
+/*
+ * Initialize the context management stuff.
+ */
+void __init mmu_context_init(void)
+{
+ /* Mark init_mm as being active on all possible CPUs since
+ * we'll get called with prev == init_mm the first time
+ * we schedule on a given CPU
+ */
+ init_mm.context.active = NR_CPUS;
+
+ /*
+ * The MPC8xx has only 16 contexts. We rotate through them on each
+ * task switch. A better way would be to keep track of tasks that
+ * own contexts, and implement an LRU usage. That way very active
+ * tasks don't always have to pay the TLB reload overhead. The
+ * kernel pages are mapped shared, so the kernel can run on behalf
+ * of any task that makes a kernel entry. Shared does not mean they
+ * are not protected, just that the ASID comparison is not performed.
+ * -- Dan
+ *
+ * The IBM4xx has 256 contexts, so we can just rotate through these
+ * as a way of "switching" contexts. If the TID of the TLB is zero,
+ * the PID/TID comparison is disabled, so we can use a TID of zero
+ * to represent all kernel pages as shared among all contexts.
+ * -- Dan
+ */
+ if (mmu_has_feature(MMU_FTR_TYPE_8xx)) {
+ first_context = 0;
+ last_context = 15;
+ } else {
+ first_context = 1;
+ last_context = 255;
+ }
+
+#ifdef DEBUG_CLAMP_LAST_CONTEXT
+ last_context = DEBUG_CLAMP_LAST_CONTEXT;
+#endif
+ /*
+ * Allocate the maps used by context management
+ */
+ context_map = alloc_bootmem(CTX_MAP_SIZE);
+ context_mm = alloc_bootmem(sizeof(void *) * (last_context + 1));
+ stale_map[0] = alloc_bootmem(CTX_MAP_SIZE);
+
+#ifdef CONFIG_SMP
+ register_cpu_notifier(&mmu_context_cpu_nb);
+#endif
+
+ printk(KERN_INFO
+ "MMU: Allocated %d bytes of context maps for %d contexts\n",
+ 2 * CTX_MAP_SIZE + (sizeof(void *) * (last_context + 1)),
+ last_context - first_context + 1);
+
+ /*
+ * Some processors have too few contexts to reserve one for
+ * init_mm, and require using context 0 for a normal task.
+ * Other processors reserve the use of context zero for the kernel.
+ * This code assumes first_context < 32.
+ */
+ context_map[0] = (1 << first_context) - 1;
+ next_context = first_context;
+ nr_free_contexts = last_context - first_context + 1;
+}
+
diff --git a/arch/powerpc/mm/mmu_decl.h b/arch/powerpc/mm/mmu_decl.h
index fab3cfad40992d45dcae4113b862497dfea42632..4314b39b6faf6c5c83f517c4bed95d00b5191123 100644
--- a/arch/powerpc/mm/mmu_decl.h
+++ b/arch/powerpc/mm/mmu_decl.h
@@ -22,10 +22,58 @@
#include
#include
+#ifdef CONFIG_PPC_MMU_NOHASH
+
+/*
+ * On 40x and 8xx, we directly inline tlbia and tlbivax
+ */
+#if defined(CONFIG_40x) || defined(CONFIG_8xx)
+static inline void _tlbil_all(void)
+{
+ asm volatile ("sync; tlbia; isync" : : : "memory")
+}
+static inline void _tlbil_pid(unsigned int pid)
+{
+ asm volatile ("sync; tlbia; isync" : : : "memory")
+}
+#else /* CONFIG_40x || CONFIG_8xx */
+extern void _tlbil_all(void);
+extern void _tlbil_pid(unsigned int pid);
+#endif /* !(CONFIG_40x || CONFIG_8xx) */
+
+/*
+ * On 8xx, we directly inline tlbie, on others, it's extern
+ */
+#ifdef CONFIG_8xx
+static inline void _tlbil_va(unsigned long address, unsigned int pid)
+{
+ asm volatile ("tlbie %0; sync" : : "r" (address) : "memory")
+}
+#else /* CONFIG_8xx */
+extern void _tlbil_va(unsigned long address, unsigned int pid);
+#endif /* CONIFG_8xx */
+
+/*
+ * As of today, we don't support tlbivax broadcast on any
+ * implementation. When that becomes the case, this will be
+ * an extern.
+ */
+static inline void _tlbivax_bcast(unsigned long address, unsigned int pid)
+{
+ BUG();
+}
+
+#else /* CONFIG_PPC_MMU_NOHASH */
+
extern void hash_preload(struct mm_struct *mm, unsigned long ea,
unsigned long access, unsigned long trap);
+extern void _tlbie(unsigned long address);
+extern void _tlbia(void);
+
+#endif /* CONFIG_PPC_MMU_NOHASH */
+
#ifdef CONFIG_PPC32
extern void mapin_ram(void);
extern int map_page(unsigned long va, phys_addr_t pa, int flags);
@@ -58,17 +106,14 @@ extern phys_addr_t lowmem_end_addr;
* architectures. -- Dan
*/
#if defined(CONFIG_8xx)
-#define flush_HPTE(X, va, pg) _tlbie(va, 0 /* 8xx doesn't care about PID */)
#define MMU_init_hw() do { } while(0)
#define mmu_mapin_ram() (0UL)
#elif defined(CONFIG_4xx)
-#define flush_HPTE(pid, va, pg) _tlbie(va, pid)
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
#elif defined(CONFIG_FSL_BOOKE)
-#define flush_HPTE(pid, va, pg) _tlbie(va, pid)
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
extern void adjust_total_lowmem(void);
@@ -77,18 +122,4 @@ extern void adjust_total_lowmem(void);
/* anything 32-bit except 4xx or 8xx */
extern void MMU_init_hw(void);
extern unsigned long mmu_mapin_ram(void);
-
-/* Be careful....this needs to be updated if we ever encounter 603 SMPs,
- * which includes all new 82xx processors. We need tlbie/tlbsync here
- * in that case (I think). -- Dan.
- */
-static inline void flush_HPTE(unsigned context, unsigned long va,
- unsigned long pdval)
-{
- if ((Hash != 0) &&
- cpu_has_feature(CPU_FTR_HPTE_TABLE))
- flush_hash_pages(0, va, pdval, 1);
- else
- _tlbie(va);
-}
#endif
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
new file mode 100644
index 0000000000000000000000000000000000000000..6d94116fdea171b6683fc938e7639dfe92ba1caf
--- /dev/null
+++ b/arch/powerpc/mm/pgtable.c
@@ -0,0 +1,117 @@
+/*
+ * This file contains common routines for dealing with free of page tables
+ *
+ * Derived from arch/powerpc/mm/tlb_64.c:
+ * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
+ *
+ * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
+ * and Cort Dougan (PReP) (cort@cs.nmt.edu)
+ * Copyright (C) 1996 Paul Mackerras
+ *
+ * Derived from "arch/i386/mm/init.c"
+ * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
+ *
+ * Dave Engebretsen
+ * Rework for PPC64 port.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include
+#include
+#include
+#include
+#include