Commit cdc36b22 authored by Jon Mason's avatar Jon Mason Committed by Florian Fainelli
Browse files

ARM: dts: enable clock support for BCM5301X 



Replace current device tree dummy clocks with real clock support for
Broadcom Northstar SoCs.

Signed-off-by: default avatarJon Mason <jonmason@broadcom.com>
Reviewed-by: default avatarRay Jui <rjui@broadcom.com>
Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
parent 0f9f27a3

arch/arm/boot/dts/bcm5301x.dtsi

+71 −21
Original line number Diff line number Diff line
@@ -8,6 +8,7 @@ 
 * Licensed under the GNU/GPL. See COPYING for details.

 */



#include <dt-bindings/clock/bcm-nsp.h>

#include <dt-bindings/gpio/gpio.h>

#include <dt-bindings/input/input.h>

#include <dt-bindings/interrupt-controller/irq.h>
@@ -27,7 +28,7 @@ uart0: serial@0300 { 
			compatible = "ns16550";

			reg = <0x0300 0x100>;

			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;

			clock-frequency = <100000000>;

			clocks = <&iprocslow>;

			status = "disabled";

		};
@@ -35,48 +36,55 @@ uart1: serial@0400 { 
			compatible = "ns16550";

			reg = <0x0400 0x100>;

			interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;

			clock-frequency = <100000000>;

			clocks = <&iprocslow>;

			status = "disabled";

		};

	};



	mpcore {

		compatible = "simple-bus";

		ranges = <0x00000000 0x19020000 0x00003000>;

		ranges = <0x00000000 0x19000000 0x00023000>;

		#address-cells = <1>;

		#size-cells = <1>;



		scu@0000 {

		a9pll: arm_clk@00000 {

			#clock-cells = <0>;

			compatible = "brcm,nsp-armpll";

			clocks = <&osc>;

			reg = <0x00000 0x1000>;

		};



		scu@20000 {

			compatible = "arm,cortex-a9-scu";

			reg = <0x0000 0x100>;

			reg = <0x20000 0x100>;

		};



		timer@0200 {

		timer@20200 {

			compatible = "arm,cortex-a9-global-timer";

			reg = <0x0200 0x100>;

			reg = <0x20200 0x100>;

			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&clk_periph>;

			clocks = <&periph_clk>;

		};



		local-timer@0600 {

		local-timer@20600 {

			compatible = "arm,cortex-a9-twd-timer";

			reg = <0x0600 0x100>;

			reg = <0x20600 0x100>;

			interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&clk_periph>;

			clocks = <&periph_clk>;

		};



		gic: interrupt-controller@1000 {

		gic: interrupt-controller@21000 {

			compatible = "arm,cortex-a9-gic";

			#interrupt-cells = <3>;

			#address-cells = <0>;

			interrupt-controller;

			reg = <0x1000 0x1000>,

			      <0x0100 0x100>;

			reg = <0x21000 0x1000>,

			      <0x20100 0x100>;

		};



		L2: cache-controller@2000 {

		L2: cache-controller@22000 {

			compatible = "arm,pl310-cache";

			reg = <0x2000 0x1000>;

			reg = <0x22000 0x1000>;

			cache-unified;

			arm,shared-override;

			prefetch-data = <1>;
@@ -94,14 +102,37 @@ pmu { 


	clocks {

		#address-cells = <1>;

		#size-cells = <0>;

		#size-cells = <1>;

		ranges;



		/* As long as we do not have a real clock driver us this

		 * fixed clock */

		clk_periph: periph {

		osc: oscillator {

			#clock-cells = <0>;

			compatible = "fixed-clock";

			clock-frequency = <25000000>;

		};



		iprocmed: iprocmed {

			#clock-cells = <0>;

			compatible = "fixed-factor-clock";

			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;

			clock-div = <2>;

			clock-mult = <1>;

		};



		iprocslow: iprocslow {

			#clock-cells = <0>;

			compatible = "fixed-factor-clock";

			clocks = <&genpll BCM_NSP_GENPLL_IPROCFAST_CLK>;

			clock-div = <4>;

			clock-mult = <1>;

		};



		periph_clk: periph_clk {

			#clock-cells = <0>;

			clock-frequency = <400000000>;

			compatible = "fixed-factor-clock";

			clocks = <&a9pll>;

			clock-div = <2>;

			clock-mult = <1>;

		};

	};
@@ -178,6 +209,25 @@ chipcommon: chipcommon@0 { 
		};

	};



	lcpll0: lcpll0@1800c100 {

		#clock-cells = <1>;

		compatible = "brcm,nsp-lcpll0";

		reg = <0x1800c100 0x14>;

		clocks = <&osc>;

		clock-output-names = "lcpll0", "pcie_phy", "sdio",

				     "ddr_phy";

	};



	genpll: genpll@1800c140 {

		#clock-cells = <1>;

		compatible = "brcm,nsp-genpll";

		reg = <0x1800c140 0x24>;

		clocks = <&osc>;

		clock-output-names = "genpll", "phy", "ethernetclk",

				     "usbclk", "iprocfast", "sata1",

				     "sata2";

	};



	nand: nand@18028000 {

		compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand";

		reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>;