Commit 92a1aa25 authored by Larry Finger's avatar Larry Finger Committed by Kalle Valo
Browse files

rtlwifi: rtl8723{be,ae}: Remove CamelCase variables 



If a macro is in CamelCase, it it converted to upper case. Variables
and routine names are converted to lower case.

Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: default avatarKalle Valo <kvalo@codeaurora.org>
parent 2a83ad1f

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/def.h

+1 −1
Original line number Diff line number Diff line
@@ -94,7 +94,7 @@ 
#define IS_VENDOR_8723A_B_CUT(version)	((IS_8723_SERIES(version))\

		? ((GET_CVID_CUT_VERSION(version) == \

		B_CUT_VERSION) ? true : false) : false)

#define IS_81xxC_VENDOR_UMC_B_CUT(version)	((IS_CHIP_VENDOR_UMC(version))\

#define IS_81XXC_VENDOR_UMC_B_CUT(version)	((IS_CHIP_VENDOR_UMC(version))\

		? ((GET_CVID_CUT_VERSION(version) == \

		B_CUT_VERSION) ? true : false) : false)

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/hw.c

+4 −4
Original line number Diff line number Diff line
@@ -676,7 +676,7 @@ static bool _rtl8712e_init_mac(struct ieee80211_hw *hw) 


	/* HW Power on sequence */

	if (!rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,

		PWR_INTF_PCI_MSK, Rtl8723_NIC_ENABLE_FLOW))

		PWR_INTF_PCI_MSK, RTL8723_NIC_ENABLE_FLOW))

		return false;



	bytetmp = rtl_read_byte(rtlpriv, REG_PCIE_CTRL_REG+2);
@@ -966,7 +966,7 @@ int rtl8723e_hw_init(struct ieee80211_hw *hw) 
	if (IS_VENDOR_UMC_A_CUT(rtlhal->version)) {

		rtl_set_rfreg(hw, RF90_PATH_A, RF_RX_G1, MASKDWORD, 0x30255);

		rtl_set_rfreg(hw, RF90_PATH_A, RF_RX_G2, MASKDWORD, 0x50a00);

	} else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version)) {

	} else if (IS_81XXC_VENDOR_UMC_B_CUT(rtlhal->version)) {

		rtl_set_rfreg(hw, RF90_PATH_A, 0x0C, MASKDWORD, 0x894AE);

		rtl_set_rfreg(hw, RF90_PATH_A, 0x0A, MASKDWORD, 0x1AF31);

		rtl_set_rfreg(hw, RF90_PATH_A, RF_IPA, MASKDWORD, 0x8F425);
@@ -1262,7 +1262,7 @@ static void _rtl8723e_poweroff_adapter(struct ieee80211_hw *hw) 
	/* Combo (PCIe + USB) Card and PCIe-MF Card */

	/* 1. Run LPS WL RFOFF flow */

	rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,

				 PWR_INTF_PCI_MSK, Rtl8723_NIC_LPS_ENTER_FLOW);

				 PWR_INTF_PCI_MSK, RTL8723_NIC_LPS_ENTER_FLOW);



	/* 2. 0x1F[7:0] = 0 */

	/* turn off RF */
@@ -1282,7 +1282,7 @@ static void _rtl8723e_poweroff_adapter(struct ieee80211_hw *hw) 


	/* HW card disable configuration. */

	rtl_hal_pwrseqcmdparsing(rtlpriv, PWR_CUT_ALL_MSK, PWR_FAB_ALL_MSK,

		PWR_INTF_PCI_MSK, Rtl8723_NIC_DISABLE_FLOW);

		PWR_INTF_PCI_MSK, RTL8723_NIC_DISABLE_FLOW);



	/* Reset MCU IO Wrapper */

	u1b_tmp = rtl_read_byte(rtlpriv, REG_RSV_CTRL + 1);

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.c

+1 −1
Original line number Diff line number Diff line
@@ -883,7 +883,7 @@ static void _rtl8723e_phy_sw_rf_seting(struct ieee80211_hw *hw, u8 channel) 
	struct rtl_phy *rtlphy = &rtlpriv->phy;

	struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));



	if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version)) {

	if (IS_81XXC_VENDOR_UMC_B_CUT(rtlhal->version)) {

		if (channel == 6 && rtlphy->current_chan_bw ==

				HT_CHANNEL_WIDTH_20)

			rtl_set_rfreg(hw, RF90_PATH_A, RF_RX_G1,

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/phy.h

+1 −1
Original line number Diff line number Diff line
@@ -26,7 +26,7 @@ 
#define MAX_STALL_TIME				50

#define ANTENNADIVERSITYVALUE			0x80

#define MAX_TXPWR_IDX_NMODE_92S			63

#define Reset_Cnt_Limit				3

#define reset_cnt_limit				3



#define IQK_ADDA_REG_NUM			16

#define IQK_MAC_REG_NUM				4

drivers/net/wireless/realtek/rtlwifi/rtl8723ae/pwrseq.h

+9 −9
Original line number Diff line number Diff line
@@ -305,14 +305,14 @@ extern struct wlan_pwr_cfg rtl8723A_leave_lps_flow 
		[RTL8723A_TRANS_LPS_TO_ACT_STEPS + RTL8723A_TRANS_END_STEPS];



/* RTL8723 Power Configuration CMDs for PCIe interface */

#define Rtl8723_NIC_PWR_ON_FLOW		rtl8723A_power_on_flow

#define Rtl8723_NIC_RF_OFF_FLOW		rtl8723A_radio_off_flow

#define Rtl8723_NIC_DISABLE_FLOW	rtl8723A_card_disable_flow

#define Rtl8723_NIC_ENABLE_FLOW		rtl8723A_card_enable_flow

#define Rtl8723_NIC_SUSPEND_FLOW	rtl8723A_suspend_flow

#define Rtl8723_NIC_RESUME_FLOW		rtl8723A_resume_flow

#define Rtl8723_NIC_PDN_FLOW		rtl8723A_hwpdn_flow

#define Rtl8723_NIC_LPS_ENTER_FLOW	rtl8723A_enter_lps_flow

#define Rtl8723_NIC_LPS_LEAVE_FLOW	rtl8723A_leave_lps_flow

#define RTL8723_NIC_PWR_ON_FLOW		rtl8723A_power_on_flow

#define RTL8723_NIC_RF_OFF_FLOW		rtl8723A_radio_off_flow

#define RTL8723_NIC_DISABLE_FLOW	rtl8723A_card_disable_flow

#define RTL8723_NIC_ENABLE_FLOW		rtl8723A_card_enable_flow

#define RTL8723_NIC_SUSPEND_FLOW	rtl8723A_suspend_flow

#define RTL8723_NIC_RESUME_FLOW		rtl8723A_resume_flow

#define RTL8723_NIC_PDN_FLOW		rtl8723A_hwpdn_flow

#define RTL8723_NIC_LPS_ENTER_FLOW	rtl8723A_enter_lps_flow

#define RTL8723_NIC_LPS_LEAVE_FLOW	rtl8723A_leave_lps_flow



#endif