diff --git a/Documentation/ABI/stable/vdso b/Documentation/ABI/stable/vdso index 8a1cbb594497152f48e805335d9445928c91de37..7cdfc28cc2c6d93b861d6ec3acb05bc5aca8bc70 100644 --- a/Documentation/ABI/stable/vdso +++ b/Documentation/ABI/stable/vdso @@ -24,4 +24,4 @@ though. (As of this writing, this ABI documentation as been confirmed for x86_64. The maintainers of the other vDSO-using architectures should confirm - that it is correct for their architecture.) \ No newline at end of file + that it is correct for their architecture.) diff --git a/Documentation/ABI/testing/sysfs-block-rssd b/Documentation/ABI/testing/sysfs-block-rssd index 679ce354312281846e4ef2decee0689b0775c985..beef30c046b0d3181bfc353d15704bb4bdaf3da6 100644 --- a/Documentation/ABI/testing/sysfs-block-rssd +++ b/Documentation/ABI/testing/sysfs-block-rssd @@ -1,26 +1,5 @@ -What: /sys/block/rssd*/registers -Date: March 2012 -KernelVersion: 3.3 -Contact: Asai Thambi S P -Description: This is a read-only file. Dumps below driver information and - hardware registers. - - S ACTive - - Command Issue - - Completed - - PORT IRQ STAT - - HOST IRQ STAT - - Allocated - - Commands in Q - What: /sys/block/rssd*/status Date: April 2012 KernelVersion: 3.4 Contact: Asai Thambi S P Description: This is a read-only file. Indicates the status of the device. - -What: /sys/block/rssd*/flags -Date: May 2012 -KernelVersion: 3.5 -Contact: Asai Thambi S P -Description: This is a read-only file. Dumps the flags in port and driver - data structure diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram index c8b3b48ec62c29232ed10db7b3443c6189f21a2d..ec93fe33baa6bc853528dc7179adf1eec852078c 100644 --- a/Documentation/ABI/testing/sysfs-block-zram +++ b/Documentation/ABI/testing/sysfs-block-zram @@ -96,4 +96,4 @@ Description: overhead, allocated for this disk. So, allocator space efficiency can be calculated using compr_data_size and this statistic. - Unit: bytes \ No newline at end of file + Unit: bytes diff --git a/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg b/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg index cb830df8777c017a5df7b7afbdcec0f94f3d07cd..70d00dfa443d2f2f85d24f662c17606b034673c3 100644 --- a/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg +++ b/Documentation/ABI/testing/sysfs-bus-usb-devices-usbsevseg @@ -40,4 +40,4 @@ Description: Controls the decimal places on the device. the value of 10 ** n. Assume this field has the value k and has 1 or more decimal places set, to set the mth place (where m is not already set), - change this fields value to k + 10 ** m. \ No newline at end of file + change this fields value to k + 10 ** m. diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 index 4a9c545bda4ba2d4d75637290007d2b510134c9f..33e648808117770949f81bd72e4b7fe1479705d4 100644 --- a/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 +++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-adp8870 @@ -53,4 +53,4 @@ Description: Documentation/ABI/stable/sysfs-class-backlight. It can be enabled by writing the value stored in /sys/class/backlight//max_brightness to - /sys/class/backlight//brightness. \ No newline at end of file + /sys/class/backlight//brightness. diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd index db1ad7e34fc3a00e14be0c1045564fe6c98bd37e..938ef71e2035e7c04203c7b65d2a120dbd96944a 100644 --- a/Documentation/ABI/testing/sysfs-class-mtd +++ b/Documentation/ABI/testing/sysfs-class-mtd @@ -142,13 +142,14 @@ KernelVersion: 3.4 Contact: linux-mtd@lists.infradead.org Description: This allows the user to examine and adjust the criteria by which - mtd returns -EUCLEAN from mtd_read(). If the maximum number of - bit errors that were corrected on any single region comprising - an ecc step (as reported by the driver) equals or exceeds this - value, -EUCLEAN is returned. Otherwise, absent an error, 0 is - returned. Higher layers (e.g., UBI) use this return code as an - indication that an erase block may be degrading and should be - scrutinized as a candidate for being marked as bad. + mtd returns -EUCLEAN from mtd_read() and mtd_read_oob(). If the + maximum number of bit errors that were corrected on any single + region comprising an ecc step (as reported by the driver) equals + or exceeds this value, -EUCLEAN is returned. Otherwise, absent + an error, 0 is returned. Higher layers (e.g., UBI) use this + return code as an indication that an erase block may be + degrading and should be scrutinized as a candidate for being + marked as bad. The initial value may be specified by the flash device driver. If not, then the default value is ecc_strength. @@ -167,7 +168,7 @@ Description: block degradation, but high enough to avoid the consequences of a persistent return value of -EUCLEAN on devices where sticky bitflips occur. Note that if bitflip_threshold exceeds - ecc_strength, -EUCLEAN is never returned by mtd_read(). + ecc_strength, -EUCLEAN is never returned by the read operations. Conversely, if bitflip_threshold is zero, -EUCLEAN is always returned, absent a hard error. diff --git a/Documentation/ABI/testing/sysfs-devices-system-xen_cpu b/Documentation/ABI/testing/sysfs-devices-system-xen_cpu new file mode 100644 index 0000000000000000000000000000000000000000..9ca02fb2d4983b201c727db1e6b2ee244f3affb8 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-system-xen_cpu @@ -0,0 +1,20 @@ +What: /sys/devices/system/xen_cpu/ +Date: May 2012 +Contact: Liu, Jinsong +Description: + A collection of global/individual Xen physical cpu attributes + + Individual physical cpu attributes are contained in + subdirectories named by the Xen's logical cpu number, e.g.: + /sys/devices/system/xen_cpu/xen_cpu#/ + + +What: /sys/devices/system/xen_cpu/xen_cpu#/online +Date: May 2012 +Contact: Liu, Jinsong +Description: + Interface to online/offline Xen physical cpus + + When running under Xen platform, it provide user interface + to online/offline physical cpus, except cpu0 due to several + logic restrictions and assumptions. diff --git a/Documentation/ABI/testing/sysfs-driver-hid-lenovo-tpkbd b/Documentation/ABI/testing/sysfs-driver-hid-lenovo-tpkbd new file mode 100644 index 0000000000000000000000000000000000000000..57b92cbdceae9c75ca0855f9079c67593f77956b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-hid-lenovo-tpkbd @@ -0,0 +1,38 @@ +What: /sys/bus/usb/devices/-:./::./press_to_select +Date: July 2011 +Contact: linux-input@vger.kernel.org +Description: This controls if mouse clicks should be generated if the trackpoint is quickly pressed. How fast this press has to be + is being controlled by press_speed. + Values are 0 or 1. + +What: /sys/bus/usb/devices/-:./::./dragging +Date: July 2011 +Contact: linux-input@vger.kernel.org +Description: If this setting is enabled, it is possible to do dragging by pressing the trackpoint. This requires press_to_select to be enabled. + Values are 0 or 1. + +What: /sys/bus/usb/devices/-:./::./release_to_select +Date: July 2011 +Contact: linux-input@vger.kernel.org +Description: For details regarding this setting please refer to http://www.pc.ibm.com/ww/healthycomputing/trkpntb.html + Values are 0 or 1. + +What: /sys/bus/usb/devices/-:./::./select_right +Date: July 2011 +Contact: linux-input@vger.kernel.org +Description: This setting controls if the mouse click events generated by pressing the trackpoint (if press_to_select is enabled) generate + a left or right mouse button click. + Values are 0 or 1. + +What: /sys/bus/usb/devices/-:./::./sensitivity +Date: July 2011 +Contact: linux-input@vger.kernel.org +Description: This file contains the trackpoint sensitivity. + Values are decimal integers from 1 (lowest sensitivity) to 255 (highest sensitivity). + +What: /sys/bus/usb/devices/-:./::./press_speed +Date: July 2011 +Contact: linux-input@vger.kernel.org +Description: This setting controls how fast the trackpoint needs to be pressed to generate a mouse click if press_to_select is enabled. + Values are decimal integers from 1 (slowest) to 255 (fastest). + diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu b/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu new file mode 100644 index 0000000000000000000000000000000000000000..b42922cf6b1f1840965708131d7762c241df6493 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-savu @@ -0,0 +1,77 @@ +What: /sys/bus/usb/devices/-:./::./savu/roccatsavu/buttons +Date: Mai 2012 +Contact: Stefan Achatz +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split into general settings and + button settings. buttons holds informations about button layout. + When written, this file lets one write the respective profile + buttons to the mouse. The data has to be 47 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + Before reading this file, control has to be written to select + which profile to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./savu/roccatsavu/control +Date: Mai 2012 +Contact: Stefan Achatz +Description: When written, this file lets one select which data from which + profile will be read next. The data has to be 3 bytes long. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./savu/roccatsavu/general +Date: Mai 2012 +Contact: Stefan Achatz +Description: The mouse can store 5 profiles which can be switched by the + press of a button. A profile is split into general settings and + button settings. profile holds informations like resolution, sensitivity + and light effects. + When written, this file lets one write the respective profile + settings back to the mouse. The data has to be 43 bytes long. + The mouse will reject invalid data. + Which profile to write is determined by the profile number + contained in the data. + This file is writeonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./savu/roccatsavu/info +Date: Mai 2012 +Contact: Stefan Achatz +Description: When read, this file returns general data like firmware version. + The data is 8 bytes long. + This file is readonly. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./savu/roccatsavu/macro +Date: Mai 2012 +Contact: Stefan Achatz +Description: When written, this file lets one store macros with max 500 + keystrokes for a specific button for a specific profile. + Button and profile numbers are included in written data. + The data has to be 2083 bytes long. + Before reading this file, control has to be written to select + which profile and key to read. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./savu/roccatsavu/profile +Date: Mai 2012 +Contact: Stefan Achatz +Description: The mouse can store 5 profiles which can be switched by the + press of a button. profile holds number of actual profile. + This value is persistent, so its value determines the profile + that's active when the mouse is powered on next time. + When written, the mouse activates the set profile immediately. + The data has to be 3 bytes long. + The mouse will reject invalid data. +Users: http://roccat.sourceforge.net + +What: /sys/bus/usb/devices/-:./::./savu/roccatsavu/sensor +Date: July 2012 +Contact: Stefan Achatz +Description: The mouse has a Avago ADNS-3090 sensor. + This file allows reading and writing of the mouse sensors registers. + The data has to be 4 bytes long. +Users: http://roccat.sourceforge.net + diff --git a/Documentation/ABI/testing/sysfs-kernel-iommu_groups b/Documentation/ABI/testing/sysfs-kernel-iommu_groups new file mode 100644 index 0000000000000000000000000000000000000000..9b31556cfdda8e6171b82cdfc05c51a251ff2428 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-kernel-iommu_groups @@ -0,0 +1,14 @@ +What: /sys/kernel/iommu_groups/ +Date: May 2012 +KernelVersion: v3.5 +Contact: Alex Williamson +Description: /sys/kernel/iommu_groups/ contains a number of sub- + directories, each representing an IOMMU group. The + name of the sub-directory matches the iommu_group_id() + for the group, which is an integer value. Within each + subdirectory is another directory named "devices" with + links to the sysfs devices contained in this group. + The group directory also optionally contains a "name" + file if the IOMMU driver has chosen to register a more + common name for the group. +Users: diff --git a/Documentation/ABI/testing/sysfs-power b/Documentation/ABI/testing/sysfs-power index 31725ffeeb3a3bc09bb4c712a3f88bfbe941aae8..217772615d0288f996e05cc128b98c9a40d95042 100644 --- a/Documentation/ABI/testing/sysfs-power +++ b/Documentation/ABI/testing/sysfs-power @@ -231,3 +231,16 @@ Description: Reads from this file return a string consisting of the names of wakeup sources created with the help of /sys/power/wake_lock that are inactive at the moment, separated with spaces. + +What: /sys/power/pm_print_times +Date: May 2012 +Contact: Sameer Nanda +Description: + The /sys/power/pm_print_times file allows user space to + control whether the time taken by devices to suspend and + resume is printed. These prints are useful for hunting down + devices that take too long to suspend or resume. + + Writing a "1" enables this printing while writing a "0" + disables it. The default value is "0". Reading from this file + will display the current value. diff --git a/Documentation/DocBook/80211.tmpl b/Documentation/DocBook/80211.tmpl index f3e214f9e25675660257eb25060bd62890b049b7..42e7f030cb161f018992ffd72fc64508201c9ddf 100644 --- a/Documentation/DocBook/80211.tmpl +++ b/Documentation/DocBook/80211.tmpl @@ -404,7 +404,6 @@ !Finclude/net/mac80211.h ieee80211_get_tkip_p1k !Finclude/net/mac80211.h ieee80211_get_tkip_p1k_iv !Finclude/net/mac80211.h ieee80211_get_tkip_p2k -!Finclude/net/mac80211.h ieee80211_key_removed diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 676bc46f9c52a476b3c8c280cca437d756726235..cda0dfb6769aee5d0fcadb8a30b4d19658259bc7 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -3988,7 +3988,7 @@ interface and may change in the future. from RGB to Y'CbCr color space. - + diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml index e3d5afcdafbb5b03cf9994478e3e0d8139442dda..0a4b90fcf2dab77b36ed1e52749040ddcc97a113 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml @@ -284,13 +284,6 @@ These controls are described in . - - V4L2_CTRL_CLASS_JPEG - 0x9d0000 - The class containing JPEG compression controls. -These controls are described in . - diff --git a/Documentation/ManagementStyle b/Documentation/ManagementStyle index a5f0ea58c788f19527b634875a372fa394057160..a211ee8d8b447354ac3758d2f6f50b901aa41ea0 100644 --- a/Documentation/ManagementStyle +++ b/Documentation/ManagementStyle @@ -178,7 +178,7 @@ sadly that you are one too, and that while we can all bask in the secure knowledge that we're better than the average person (let's face it, nobody ever believes that they're average or below-average), we should also admit that we're not the sharpest knife around, and there will be -other people that are less of an idiot that you are. +other people that are less of an idiot than you are. Some people react badly to smart people. Others take advantage of them. diff --git a/Documentation/RCU/checklist.txt b/Documentation/RCU/checklist.txt index 5c8d74968090544ae570105b00a96561ea4acd6c..fc103d7a04740d338bf0490a2133674c25986d59 100644 --- a/Documentation/RCU/checklist.txt +++ b/Documentation/RCU/checklist.txt @@ -162,9 +162,9 @@ over a rather long period of time, but improvements are always welcome! when publicizing a pointer to a structure that can be traversed by an RCU read-side critical section. -5. If call_rcu(), or a related primitive such as call_rcu_bh() or - call_rcu_sched(), is used, the callback function must be - written to be called from softirq context. In particular, +5. If call_rcu(), or a related primitive such as call_rcu_bh(), + call_rcu_sched(), or call_srcu() is used, the callback function + must be written to be called from softirq context. In particular, it cannot block. 6. Since synchronize_rcu() can block, it cannot be called from @@ -202,11 +202,12 @@ over a rather long period of time, but improvements are always welcome! updater uses call_rcu_sched() or synchronize_sched(), then the corresponding readers must disable preemption, possibly by calling rcu_read_lock_sched() and rcu_read_unlock_sched(). - If the updater uses synchronize_srcu(), the the corresponding - readers must use srcu_read_lock() and srcu_read_unlock(), - and with the same srcu_struct. The rules for the expedited - primitives are the same as for their non-expedited counterparts. - Mixing things up will result in confusion and broken kernels. + If the updater uses synchronize_srcu() or call_srcu(), + the the corresponding readers must use srcu_read_lock() and + srcu_read_unlock(), and with the same srcu_struct. The rules for + the expedited primitives are the same as for their non-expedited + counterparts. Mixing things up will result in confusion and + broken kernels. One exception to this rule: rcu_read_lock() and rcu_read_unlock() may be substituted for rcu_read_lock_bh() and rcu_read_unlock_bh() @@ -333,14 +334,14 @@ over a rather long period of time, but improvements are always welcome! victim CPU from ever going offline.) 14. SRCU (srcu_read_lock(), srcu_read_unlock(), srcu_dereference(), - synchronize_srcu(), and synchronize_srcu_expedited()) may only - be invoked from process context. Unlike other forms of RCU, it - -is- permissible to block in an SRCU read-side critical section - (demarked by srcu_read_lock() and srcu_read_unlock()), hence the - "SRCU": "sleepable RCU". Please note that if you don't need - to sleep in read-side critical sections, you should be using - RCU rather than SRCU, because RCU is almost always faster and - easier to use than is SRCU. + synchronize_srcu(), synchronize_srcu_expedited(), and call_srcu()) + may only be invoked from process context. Unlike other forms of + RCU, it -is- permissible to block in an SRCU read-side critical + section (demarked by srcu_read_lock() and srcu_read_unlock()), + hence the "SRCU": "sleepable RCU". Please note that if you + don't need to sleep in read-side critical sections, you should be + using RCU rather than SRCU, because RCU is almost always faster + and easier to use than is SRCU. If you need to enter your read-side critical section in a hardirq or exception handler, and then exit that same read-side @@ -353,8 +354,8 @@ over a rather long period of time, but improvements are always welcome! cleanup_srcu_struct(). These are passed a "struct srcu_struct" that defines the scope of a given SRCU domain. Once initialized, the srcu_struct is passed to srcu_read_lock(), srcu_read_unlock() - synchronize_srcu(), and synchronize_srcu_expedited(). A given - synchronize_srcu() waits only for SRCU read-side critical + synchronize_srcu(), synchronize_srcu_expedited(), and call_srcu(). + A given synchronize_srcu() waits only for SRCU read-side critical sections governed by srcu_read_lock() and srcu_read_unlock() calls that have been passed the same srcu_struct. This property is what makes sleeping read-side critical sections tolerable -- @@ -374,7 +375,7 @@ over a rather long period of time, but improvements are always welcome! requiring SRCU's read-side deadlock immunity or low read-side realtime latency. - Note that, rcu_assign_pointer() relates to SRCU just as they do + Note that, rcu_assign_pointer() relates to SRCU just as it does to other forms of RCU. 15. The whole point of call_rcu(), synchronize_rcu(), and friends diff --git a/Documentation/RCU/rcubarrier.txt b/Documentation/RCU/rcubarrier.txt index e439a0edee2263d554a53282aaa8512b0295a40c..38428c125135504de8737943088a4e0f3df6f213 100644 --- a/Documentation/RCU/rcubarrier.txt +++ b/Documentation/RCU/rcubarrier.txt @@ -79,8 +79,6 @@ complete. Pseudo-code using rcu_barrier() is as follows: 2. Execute rcu_barrier(). 3. Allow the module to be unloaded. -Quick Quiz #1: Why is there no srcu_barrier()? - The rcutorture module makes use of rcu_barrier in its exit function as follows: @@ -162,7 +160,7 @@ for any pre-existing callbacks to complete. Then lines 55-62 print status and do operation-specific cleanup, and then return, permitting the module-unload operation to be completed. -Quick Quiz #2: Is there any other situation where rcu_barrier() might +Quick Quiz #1: Is there any other situation where rcu_barrier() might be required? Your module might have additional complications. For example, if your @@ -242,7 +240,7 @@ reaches zero, as follows: 4 complete(&rcu_barrier_completion); 5 } -Quick Quiz #3: What happens if CPU 0's rcu_barrier_func() executes +Quick Quiz #2: What happens if CPU 0's rcu_barrier_func() executes immediately (thus incrementing rcu_barrier_cpu_count to the value one), but the other CPU's rcu_barrier_func() invocations are delayed for a full grace period? Couldn't this result in @@ -259,12 +257,7 @@ so that your module may be safely unloaded. Answers to Quick Quizzes -Quick Quiz #1: Why is there no srcu_barrier()? - -Answer: Since there is no call_srcu(), there can be no outstanding SRCU - callbacks. Therefore, there is no need to wait for them. - -Quick Quiz #2: Is there any other situation where rcu_barrier() might +Quick Quiz #1: Is there any other situation where rcu_barrier() might be required? Answer: Interestingly enough, rcu_barrier() was not originally @@ -278,7 +271,7 @@ Answer: Interestingly enough, rcu_barrier() was not originally implementing rcutorture, and found that rcu_barrier() solves this problem as well. -Quick Quiz #3: What happens if CPU 0's rcu_barrier_func() executes +Quick Quiz #2: What happens if CPU 0's rcu_barrier_func() executes immediately (thus incrementing rcu_barrier_cpu_count to the value one), but the other CPU's rcu_barrier_func() invocations are delayed for a full grace period? Couldn't this result in diff --git a/Documentation/RCU/torture.txt b/Documentation/RCU/torture.txt index 4ddf3913fd8c0df7b91d2d29b17e3c69327907c7..7dce8a17eac269cdff475a57377bf49963c1216a 100644 --- a/Documentation/RCU/torture.txt +++ b/Documentation/RCU/torture.txt @@ -174,11 +174,20 @@ torture_type The type of RCU to test, with string values as follows: and synchronize_rcu_bh_expedited(). "srcu": srcu_read_lock(), srcu_read_unlock() and + call_srcu(). + + "srcu_sync": srcu_read_lock(), srcu_read_unlock() and synchronize_srcu(). "srcu_expedited": srcu_read_lock(), srcu_read_unlock() and synchronize_srcu_expedited(). + "srcu_raw": srcu_read_lock_raw(), srcu_read_unlock_raw(), + and call_srcu(). + + "srcu_raw_sync": srcu_read_lock_raw(), srcu_read_unlock_raw(), + and synchronize_srcu(). + "sched": preempt_disable(), preempt_enable(), and call_rcu_sched(). diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 6bbe8dcdc3da94166160f3d27a96a6f2a622287f..69ee188515e7a9c907ec243dfff21852e55a9998 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -833,9 +833,9 @@ sched: Critical sections Grace period Barrier SRCU: Critical sections Grace period Barrier - srcu_read_lock synchronize_srcu N/A - srcu_read_unlock synchronize_srcu_expedited - srcu_read_lock_raw + srcu_read_lock synchronize_srcu srcu_barrier + srcu_read_unlock call_srcu + srcu_read_lock_raw synchronize_srcu_expedited srcu_read_unlock_raw srcu_dereference diff --git a/Documentation/arm/Samsung-S3C24XX/H1940.txt b/Documentation/arm/Samsung-S3C24XX/H1940.txt index f4a7b22c8664be44c398ab4325c951b084b965e8..b738859b1fc0f1d1daafc9a35466c7c637ecedc2 100644 --- a/Documentation/arm/Samsung-S3C24XX/H1940.txt +++ b/Documentation/arm/Samsung-S3C24XX/H1940.txt @@ -37,4 +37,4 @@ Maintainers Thanks to the many others who have also provided support. -(c) 2005 Ben Dooks \ No newline at end of file +(c) 2005 Ben Dooks diff --git a/Documentation/arm/Samsung-S3C24XX/SMDK2440.txt b/Documentation/arm/Samsung-S3C24XX/SMDK2440.txt index 32e1eae6a25fd9f942453a5548bbf587937e4a92..429390bd4684abc5fe0c89afa415af0210ac1330 100644 --- a/Documentation/arm/Samsung-S3C24XX/SMDK2440.txt +++ b/Documentation/arm/Samsung-S3C24XX/SMDK2440.txt @@ -53,4 +53,4 @@ Maintainers and to Simtec Electronics for allowing me time to work on this. -(c) 2004 Ben Dooks \ No newline at end of file +(c) 2004 Ben Dooks diff --git a/Documentation/cgroups/cgroups.txt b/Documentation/cgroups/cgroups.txt index 8e74980ab385e294a0d47cd09f635a20a66d0066..4a0b64c605fc83cef8c945a76d08554c625dc746 100644 --- a/Documentation/cgroups/cgroups.txt +++ b/Documentation/cgroups/cgroups.txt @@ -370,15 +370,12 @@ To mount a cgroup hierarchy with just the cpuset and memory subsystems, type: # mount -t cgroup -o cpuset,memory hier1 /sys/fs/cgroup/rg1 -To change the set of subsystems bound to a mounted hierarchy, just -remount with different options: -# mount -o remount,cpuset,blkio hier1 /sys/fs/cgroup/rg1 - -Now memory is removed from the hierarchy and blkio is added. - -Note this will add blkio to the hierarchy but won't remove memory or -cpuset, because the new options are appended to the old ones: -# mount -o remount,blkio /sys/fs/cgroup/rg1 +While remounting cgroups is currently supported, it is not recommend +to use it. Remounting allows changing bound subsystems and +release_agent. Rebinding is hardly useful as it only works when the +hierarchy is empty and release_agent itself should be replaced with +conventional fsnotify. The support for remounting will be removed in +the future. To Specify a hierarchy's release_agent: # mount -t cgroup -o cpuset,release_agent="/sbin/cpuset_release_agent" \ @@ -637,16 +634,6 @@ void exit(struct task_struct *task) Called during task exit. -int populate(struct cgroup *cgrp) -(cgroup_mutex held by caller) - -Called after creation of a cgroup to allow a subsystem to populate -the cgroup directory with file entries. The subsystem should make -calls to cgroup_add_file() with objects of type cftype (see -include/linux/cgroup.h for details). Note that although this -method can return an error code, the error code is currently not -always handled well. - void post_clone(struct cgroup *cgrp) (cgroup_mutex held by caller) @@ -656,7 +643,7 @@ example in cpusets, no task may attach before 'cpus' and 'mems' are set up. void bind(struct cgroup *root) -(cgroup_mutex and ss->hierarchy_mutex held by caller) +(cgroup_mutex held by caller) Called when a cgroup subsystem is rebound to a different hierarchy and root cgroup. Currently this will only involve movement between diff --git a/Documentation/connector/cn_test.c b/Documentation/connector/cn_test.c index 7764594778d43650afe3423055cd4bcabaf77c17..adcca0368d602ff4cb54c10365aa4b3651a4e79b 100644 --- a/Documentation/connector/cn_test.c +++ b/Documentation/connector/cn_test.c @@ -69,9 +69,13 @@ static int cn_test_want_notify(void) return -ENOMEM; } - nlh = NLMSG_PUT(skb, 0, 0x123, NLMSG_DONE, size - sizeof(*nlh)); + nlh = nlmsg_put(skb, 0, 0x123, NLMSG_DONE, size - sizeof(*nlh), 0); + if (!nlh) { + kfree_skb(skb); + return -EMSGSIZE; + } - msg = (struct cn_msg *)NLMSG_DATA(nlh); + msg = nlmsg_data(nlh); memset(msg, 0, size0); @@ -117,11 +121,6 @@ static int cn_test_want_notify(void) pr_info("request was sent: group=0x%x\n", ctl->group); return 0; - -nlmsg_failure: - pr_err("failed to send %u.%u\n", msg->seq, msg->ack); - kfree_skb(skb); - return -EINVAL; } #endif diff --git a/Documentation/device-mapper/verity.txt b/Documentation/device-mapper/verity.txt index 32e48797a14f80de6ebff7a441e489021bfce58a..9884681535ee36bf03a7d7baaa54abb36360d53d 100644 --- a/Documentation/device-mapper/verity.txt +++ b/Documentation/device-mapper/verity.txt @@ -7,39 +7,39 @@ This target is read-only. Construction Parameters ======================= - + - This is the version number of the on-disk format. + This is the type of the on-disk hash format. 0 is the original format used in the Chromium OS. - The salt is appended when hashing, digests are stored continuously and - the rest of the block is padded with zeros. + The salt is appended when hashing, digests are stored continuously and + the rest of the block is padded with zeros. 1 is the current format that should be used for new devices. - The salt is prepended when hashing and each digest is - padded with zeros to the power of two. + The salt is prepended when hashing and each digest is + padded with zeros to the power of two. - This is the device containing the data the integrity of which needs to be + This is the device containing data, the integrity of which needs to be checked. It may be specified as a path, like /dev/sdaX, or a device number, :. - This is the device that that supplies the hash tree data. It may be + This is the device that supplies the hash tree data. It may be specified similarly to the device path and may be the same device. If the - same device is used, the hash_start should be outside of the dm-verity - configured device size. + same device is used, the hash_start should be outside the configured + dm-verity device. - The block size on a data device. Each block corresponds to one digest on - the hash device. + The block size on a data device in bytes. + Each block corresponds to one digest on the hash device. - The size of a hash block. + The size of a hash block in bytes. The number of data blocks on the data device. Additional blocks are @@ -65,7 +65,7 @@ Construction Parameters Theory of operation =================== -dm-verity is meant to be setup as part of a verified boot path. This +dm-verity is meant to be set up as part of a verified boot path. This may be anything ranging from a boot using tboot or trustedgrub to just booting from a known-good device (like a USB drive or CD). @@ -73,20 +73,20 @@ When a dm-verity device is configured, it is expected that the caller has been authenticated in some way (cryptographic signatures, etc). After instantiation, all hashes will be verified on-demand during disk access. If they cannot be verified up to the root node of the -tree, the root hash, then the I/O will fail. This should identify +tree, the root hash, then the I/O will fail. This should detect tampering with any data on the device and the hash data. Cryptographic hashes are used to assert the integrity of the device on a -per-block basis. This allows for a lightweight hash computation on first read -into the page cache. Block hashes are stored linearly-aligned to the nearest -block the size of a page. +per-block basis. This allows for a lightweight hash computation on first read +into the page cache. Block hashes are stored linearly, aligned to the nearest +block size. Hash Tree --------- Each node in the tree is a cryptographic hash. If it is a leaf node, the hash -is of some block data on disk. If it is an intermediary node, then the hash is -of a number of child nodes. +of some data block on disk is calculated. If it is an intermediary node, +the hash of a number of child nodes is calculated. Each entry in the tree is a collection of neighboring nodes that fit in one block. The number is determined based on block_size and the size of the @@ -110,63 +110,23 @@ alg = sha256, num_blocks = 32768, block_size = 4096 On-disk format ============== -Below is the recommended on-disk format. The verity kernel code does not -read the on-disk header. It only reads the hash blocks which directly -follow the header. It is expected that a user-space tool will verify the -integrity of the verity_header and then call dmsetup with the correct -parameters. Alternatively, the header can be omitted and the dmsetup -parameters can be passed via the kernel command-line in a rooted chain -of trust where the command-line is verified. +The verity kernel code does not read the verity metadata on-disk header. +It only reads the hash blocks which directly follow the header. +It is expected that a user-space tool will verify the integrity of the +verity header. -The on-disk format is especially useful in cases where the hash blocks -are on a separate partition. The magic number allows easy identification -of the partition contents. Alternatively, the hash blocks can be stored -in the same partition as the data to be verified. In such a configuration -the filesystem on the partition would be sized a little smaller than -the full-partition, leaving room for the hash blocks. - -struct superblock { - uint8_t signature[8] - "verity\0\0"; - - uint8_t version; - 1 - current format - - uint8_t data_block_bits; - log2(data block size) - - uint8_t hash_block_bits; - log2(hash block size) - - uint8_t pad1[1]; - zero padding - - uint16_t salt_size; - big-endian salt size - - uint8_t pad2[2]; - zero padding - - uint32_t data_blocks_hi; - big-endian high 32 bits of the 64-bit number of data blocks - - uint32_t data_blocks_lo; - big-endian low 32 bits of the 64-bit number of data blocks - - uint8_t algorithm[16]; - cryptographic algorithm - - uint8_t salt[384]; - salt (the salt size is specified above) - - uint8_t pad3[88]; - zero padding to 512-byte boundary -} +Alternatively, the header can be omitted and the dmsetup parameters can +be passed via the kernel command-line in a rooted chain of trust where +the command-line is verified. Directly following the header (and with sector number padded to the next hash block boundary) are the hash blocks which are stored a depth at a time (starting from the root), sorted in order of increasing index. +The full specification of kernel parameters and on-disk metadata format +is available at the cryptsetup project's wiki page + http://code.google.com/p/cryptsetup/wiki/DMVerity + Status ====== V (for Valid) is returned if every check performed so far was valid. @@ -174,21 +134,22 @@ If any check failed, C (for Corruption) is returned. Example ======= - -Setup a device: - dmsetup create vroot --table \ - "0 2097152 "\ - "verity 1 /dev/sda1 /dev/sda2 4096 4096 2097152 1 "\ +Set up a device: + # dmsetup create vroot --readonly --table \ + "0 2097152 verity 1 /dev/sda1 /dev/sda2 4096 4096 262144 1 sha256 "\ "4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 "\ "1234000000000000000000000000000000000000000000000000000000000000" A command line tool veritysetup is available to compute or verify -the hash tree or activate the kernel driver. This is available from -the LVM2 upstream repository and may be supplied as a package called -device-mapper-verity-tools: - git://sources.redhat.com/git/lvm2 - http://sourceware.org/git/?p=lvm2.git - http://sourceware.org/cgi-bin/cvsweb.cgi/LVM2/verity?cvsroot=lvm2 - -veritysetup -a vroot /dev/sda1 /dev/sda2 \ - 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 +the hash tree or activate the kernel device. This is available from +the cryptsetup upstream repository http://code.google.com/p/cryptsetup/ +(as a libcryptsetup extension). + +Create hash on the device: + # veritysetup format /dev/sda1 /dev/sda2 + ... + Root hash: 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 + +Activate the device: + # veritysetup create vroot /dev/sda1 /dev/sda2 \ + 4392712ba01368efdf14b05c76f9e4df0d53664630b5d48632ed17a137f39076 diff --git a/Documentation/devices.txt b/Documentation/devices.txt index 47a154f302900a9b7448723e171e7fbdc2793054..b6251cca9263c5594cd261f5e20f5aacd996efdd 100644 --- a/Documentation/devices.txt +++ b/Documentation/devices.txt @@ -2416,6 +2416,8 @@ Your cooperation is appreciated. 1 = /dev/raw/raw1 First raw I/O device 2 = /dev/raw/raw2 Second raw I/O device ... + max minor number of raw device is set by kernel config + MAX_RAW_DEVS or raw module parameter 'max_raw_devs' 163 char diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt b/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt new file mode 100644 index 0000000000000000000000000000000000000000..70c0dc5f00edef0414acf6519e1afcb43af230fd --- /dev/null +++ b/Documentation/devicetree/bindings/arm/armada-370-xp-mpic.txt @@ -0,0 +1,23 @@ +Marvell Armada 370 and Armada XP Interrupt Controller +----------------------------------------------------- + +Required properties: +- compatible: Should be "marvell,mpic" +- interrupt-controller: Identifies the node as an interrupt controller. +- #interrupt-cells: The number of cells to define the interrupts. Should be 1. + The cell is the IRQ number +- reg: Should contain PMIC registers location and length. First pair + for the main interrupt registers, second pair for the per-CPU + interrupt registers + +Example: + + mpic: interrupt-controller@d0020000 { + compatible = "marvell,mpic"; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + reg = <0xd0020000 0x1000>, + <0xd0021000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt b/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt new file mode 100644 index 0000000000000000000000000000000000000000..8b6ea2267c94999ce0c64415b9474156352988b5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/armada-370-xp-timer.txt @@ -0,0 +1,11 @@ +Marvell Armada 370 and Armada XP Global Timers +---------------------------------------------- + +Required properties: +- compatible: Should be "marvell,armada-370-xp-timer" +- interrupts: Should contain the list of Global Timer interrupts +- reg: Should contain the base address of the Global Timer registers + +Optional properties: +- marvell,timer-25Mhz: Tells whether the Global timer supports the 25 + Mhz fixed mode (available on Armada XP and not on Armada 370) diff --git a/Documentation/devicetree/bindings/arm/armada-370-xp.txt b/Documentation/devicetree/bindings/arm/armada-370-xp.txt new file mode 100644 index 0000000000000000000000000000000000000000..c6ed90ea6e17c8fb4618de8e6d3b201c3bf98479 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/armada-370-xp.txt @@ -0,0 +1,24 @@ +Marvell Armada 370 and Armada XP Platforms Device Tree Bindings +--------------------------------------------------------------- + +Boards with a SoC of the Marvell Armada 370 and Armada XP families +shall have the following property: + +Required root node property: + +compatible: must contain "marvell,armada-370-xp" + +In addition, boards using the Marvell Armada 370 SoC shall have the +following property: + +Required root node property: + +compatible: must contain "marvell,armada370" + +In addition, boards using the Marvell Armada XP SoC shall have the +following property: + +Required root node property: + +compatible: must contain "marvell,armadaxp" + diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt index aabca4f83402198c50893724a2d3dbcfb3d221d4..19078bf5cca82b22e5aba7882d592242d924fd48 100644 --- a/Documentation/devicetree/bindings/arm/atmel-aic.txt +++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt @@ -4,7 +4,7 @@ Required properties: - compatible: Should be "atmel,-aic" - interrupt-controller: Identifies the node as an interrupt controller. - interrupt-parent: For single AIC system, it is an empty property. -- #interrupt-cells: The number of cells to define the interrupts. It sould be 2. +- #interrupt-cells: The number of cells to define the interrupts. It sould be 3. The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet). The second cell is used to specify flags: bits[3:0] trigger type and level flags: @@ -14,7 +14,10 @@ Required properties: 8 = active low level-sensitive. Valid combinations are 1, 2, 3, 4, 8. Default flag for internal sources should be set to 4 (active high). + The third cell is used to specify the irq priority from 0 (lowest) to 7 + (highest). - reg: Should contain AIC registers location and length +- atmel,external-irqs: u32 array of external irqs. Examples: /* @@ -24,7 +27,7 @@ Examples: compatible = "atmel,at91rm9200-aic"; interrupt-controller; interrupt-parent; - #interrupt-cells = <2>; + #interrupt-cells = <3>; reg = <0xfffff000 0x200>; }; @@ -34,5 +37,5 @@ Examples: dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <21 4>; + interrupts = <21 4 5>; }; diff --git a/Documentation/devicetree/bindings/arm/davinci/cp-intc.txt b/Documentation/devicetree/bindings/arm/davinci/cp-intc.txt new file mode 100644 index 0000000000000000000000000000000000000000..597e8a089fe4348016af913148dd08dd6f5869ca --- /dev/null +++ b/Documentation/devicetree/bindings/arm/davinci/cp-intc.txt @@ -0,0 +1,27 @@ +* TI Common Platform Interrupt Controller + +Common Platform Interrupt Controller (cp_intc) is used on +OMAP-L1x SoCs and can support several configurable number +of interrupts. + +Main node required properties: + +- compatible : should be: + "ti,cp-intc" +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The type shall be a and the value shall be 1. + + The cell contains the interrupt number in the range [0-128]. +- ti,intc-size: Number of interrupts handled by the interrupt controller. +- reg: physical base address and size of the intc registers map. + +Example: + + intc: interrupt-controller@1 { + compatible = "ti,cp-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <101>; + reg = <0xfffee000 0x2000>; + }; diff --git a/Documentation/devicetree/bindings/arm/mvebu-system-controller.txt b/Documentation/devicetree/bindings/arm/mvebu-system-controller.txt new file mode 100644 index 0000000000000000000000000000000000000000..081c6a786c8a93a7f07a58246b0a8118fbf80fb5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mvebu-system-controller.txt @@ -0,0 +1,17 @@ +MVEBU System Controller +----------------------- +MVEBU (Marvell SOCs: Armada 370/XP, Dove, mv78xx0, Kirkwood, Orion5x) + +Required properties: + +- compatible: one of: + - "marvell,orion-system-controller" + - "marvell,armada-370-xp-system-controller" +- reg: Should contain system controller registers location and length. + +Example: + + system-controller@d0018200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0xd0018200 0x500>; + }; diff --git a/Documentation/devicetree/bindings/arm/olimex.txt b/Documentation/devicetree/bindings/arm/olimex.txt new file mode 100644 index 0000000000000000000000000000000000000000..007fb5c685a159c320e36d991a7f1b9ae20fcec5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/olimex.txt @@ -0,0 +1,6 @@ +Olimex i.MX Platforms Device Tree Bindings +------------------------------------------ + +i.MX23 Olinuxino Low Cost Board +Required root node properties: + - compatible = "olimex,imx23-olinuxino", "fsl,imx23"; diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index e78e8bccac302ee2fb4ea8f1dfbf6e8c8be94ca8..ccdd0e53451fc916cd0bfe020fab31ccf52af84d 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -47,3 +47,9 @@ Boards: - AM335X EVM : Software Developement Board for AM335x compatible = "ti,am335x-evm", "ti,am33xx", "ti,omap3" + +- AM335X Bone : Low cost community board + compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3" + +- OMAP5 EVM : Evaluation Module + compatible = "ti,omap5-evm", "ti,omap5" diff --git a/Documentation/devicetree/bindings/arm/primecell.txt b/Documentation/devicetree/bindings/arm/primecell.txt index 951ca46789d4130dc8573913943ca429a7812241..64fc82bc89283707924ff30707d445119ea07333 100644 --- a/Documentation/devicetree/bindings/arm/primecell.txt +++ b/Documentation/devicetree/bindings/arm/primecell.txt @@ -13,11 +13,17 @@ Required properties: Optional properties: - arm,primecell-periphid : Value to override the h/w value with +- clocks : From common clock binding. First clock is phandle to clock for apb + pclk. Additional clocks are optional and specific to those peripherals. +- clock-names : From common clock binding. Shall be "apb_pclk" for first clock. Example: serial@fff36000 { compatible = "arm,pl011", "arm,primecell"; arm,primecell-periphid = <0x00341011>; + clocks = <&pclk>; + clock-names = "apb_pclk"; + }; diff --git a/Documentation/devicetree/bindings/arm/tegra/emc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt similarity index 99% rename from Documentation/devicetree/bindings/arm/tegra/emc.txt rename to Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt index 09335f8eee0068c091546fb82d66b506c61701b5..4c33b29dc66070abe48bfb0f47d3f01aa9c81773 100644 --- a/Documentation/devicetree/bindings/arm/tegra/emc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-emc.txt @@ -15,7 +15,7 @@ Child device nodes describe the memory settings for different configurations and Example: - emc@7000f400 { + memory-controller@7000f400 { #address-cells = < 1 >; #size-cells = < 0 >; compatible = "nvidia,tegra20-emc"; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt index c25a0a55151d900b612ffbe518d3605642cce5ac..866d93421eba20ba81fa66e905ecd58213636d95 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt @@ -8,7 +8,7 @@ Required properties: - interrupts : Should contain MC General interrupt. Example: - mc { + memory-controller@0x7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; diff --git a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt index e47e73f612f4b30e5cb47a2ee4736db84bf9ef9f..bdf1a612422bcb004a4c262648c422ec22fa9ea8 100644 --- a/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt +++ b/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt @@ -8,7 +8,7 @@ Required properties: - interrupts : Should contain MC General interrupt. Example: - mc { + memory-controller { compatible = "nvidia,tegra30-mc"; reg = <0x7000f000 0x010 0x7000f03c 0x1b4 diff --git a/Documentation/devicetree/bindings/clock/calxeda.txt b/Documentation/devicetree/bindings/clock/calxeda.txt new file mode 100644 index 0000000000000000000000000000000000000000..0a6ac1bdcda1acfeb1b451f34e87afc0496a9539 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/calxeda.txt @@ -0,0 +1,17 @@ +Device Tree Clock bindings for Calxeda highbank platform + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be one of the following: + "calxeda,hb-pll-clock" - for a PLL clock + "calxeda,hb-a9periph-clock" - The A9 peripheral clock divided from the + A9 clock. + "calxeda,hb-a9bus-clock" - The A9 bus clock divided from the A9 clock. + "calxeda,hb-emmc-clock" - Divided clock for MMC/SD controller. +- reg : shall be the control register offset from SYSREGs base for the clock. +- clocks : shall be the input parent clock phandle for the clock. This is + either an oscillator or a pll output. +- #clock-cells : from common clock binding; shall be set to 0. diff --git a/Documentation/devicetree/bindings/clock/clock-bindings.txt b/Documentation/devicetree/bindings/clock/clock-bindings.txt new file mode 100644 index 0000000000000000000000000000000000000000..eb65d417f8c41580e7864713b71dd5bc522d1a13 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/clock-bindings.txt @@ -0,0 +1,117 @@ +This binding is a work-in-progress, and are based on some experimental +work by benh[1]. + +Sources of clock signal can be represented by any node in the device +tree. Those nodes are designated as clock providers. Clock consumer +nodes use a phandle and clock specifier pair to connect clock provider +outputs to clock inputs. Similar to the gpio specifiers, a clock +specifier is an array of one more more cells identifying the clock +output on a device. The length of a clock specifier is defined by the +value of a #clock-cells property in the clock provider node. + +[1] http://patchwork.ozlabs.org/patch/31551/ + +==Clock providers== + +Required properties: +#clock-cells: Number of cells in a clock specifier; Typically 0 for nodes + with a single clock output and 1 for nodes with multiple + clock outputs. + +Optional properties: +clock-output-names: Recommended to be a list of strings of clock output signal + names indexed by the first cell in the clock specifier. + However, the meaning of clock-output-names is domain + specific to the clock provider, and is only provided to + encourage using the same meaning for the majority of clock + providers. This format may not work for clock providers + using a complex clock specifier format. In those cases it + is recommended to omit this property and create a binding + specific names property. + + Clock consumer nodes must never directly reference + the provider's clock-output-names property. + +For example: + + oscillator { + #clock-cells = <1>; + clock-output-names = "ckil", "ckih"; + }; + +- this node defines a device with two clock outputs, the first named + "ckil" and the second named "ckih". Consumer nodes always reference + clocks by index. The names should reflect the clock output signal + names for the device. + +==Clock consumers== + +Required properties: +clocks: List of phandle and clock specifier pairs, one pair + for each clock input to the device. Note: if the + clock provider specifies '0' for #clock-cells, then + only the phandle portion of the pair will appear. + +Optional properties: +clock-names: List of clock input name strings sorted in the same + order as the clocks property. Consumers drivers + will use clock-names to match clock input names + with clocks specifiers. +clock-ranges: Empty property indicating that child nodes can inherit named + clocks from this node. Useful for bus nodes to provide a + clock to their children. + +For example: + + device { + clocks = <&osc 1>, <&ref 0>; + clock-names = "baud", "register"; + }; + + +This represents a device with two clock inputs, named "baud" and "register". +The baud clock is connected to output 1 of the &osc device, and the register +clock is connected to output 0 of the &ref. + +==Example== + + /* external oscillator */ + osc: oscillator { + compatible = "fixed-clock"; + #clock-cells = <1>; + clock-frequency = <32678>; + clock-output-names = "osc"; + }; + + /* phase-locked-loop device, generates a higher frequency clock + * from the external oscillator reference */ + pll: pll@4c000 { + compatible = "vendor,some-pll-interface" + #clock-cells = <1>; + clocks = <&osc 0>; + clock-names = "ref"; + reg = <0x4c000 0x1000>; + clock-output-names = "pll", "pll-switched"; + }; + + /* UART, using the low frequency oscillator for the baud clock, + * and the high frequency switched PLL output for register + * clocking */ + uart@a000 { + compatible = "fsl,imx-uart"; + reg = <0xa000 0x1000>; + interrupts = <33>; + clocks = <&osc 0>, <&pll 1>; + clock-names = "baud", "register"; + }; + +This DT fragment defines three devices: an external oscillator to provide a +low-frequency reference clock, a PLL device to generate a higher frequency +clock signal, and a UART. + +* The oscillator is fixed-frequency, and provides one clock output, named "osc". +* The PLL is both a clock provider and a clock consumer. It uses the clock + signal generated by the external oscillator, and provides two output signals + ("pll" and "pll-switched"). +* The UART has its baud clock connected the external oscillator and its + register clock connected to the PLL clock (the "pll-switched" signal) diff --git a/Documentation/devicetree/bindings/clock/fixed-clock.txt b/Documentation/devicetree/bindings/clock/fixed-clock.txt new file mode 100644 index 0000000000000000000000000000000000000000..0b1fe7824093ae7c300bc4cd9077e71768056487 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/fixed-clock.txt @@ -0,0 +1,21 @@ +Binding for simple fixed-rate clock sources. + +This binding uses the common clock binding[1]. + +[1] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible : shall be "fixed-clock". +- #clock-cells : from common clock binding; shall be set to 0. +- clock-frequency : frequency of clock in Hz. Should be a single cell. + +Optional properties: +- gpios : From common gpio binding; gpio connection to clock enable pin. +- clock-output-names : From common clock binding. + +Example: + clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + }; diff --git a/Documentation/devicetree/bindings/fb/mxsfb.txt b/Documentation/devicetree/bindings/fb/mxsfb.txt new file mode 100644 index 0000000000000000000000000000000000000000..b41e5e52a676c4cf28f7c0529e9cb64d46a3b0a6 --- /dev/null +++ b/Documentation/devicetree/bindings/fb/mxsfb.txt @@ -0,0 +1,19 @@ +* Freescale MXS LCD Interface (LCDIF) + +Required properties: +- compatible: Should be "fsl,-lcdif". Supported chips include + imx23 and imx28. +- reg: Address and length of the register set for lcdif +- interrupts: Should contain lcdif interrupts + +Optional properties: +- panel-enable-gpios : Should specify the gpio for panel enable + +Examples: + +lcdif@80030000 { + compatible = "fsl,imx28-lcdif"; + reg = <0x80030000 2000>; + interrupts = <38 86>; + panel-enable-gpios = <&gpio3 30 0>; +}; diff --git a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt index 4363ae4b3c14741008b4d1e61db4b90a161ff0cc..4f3929713ae4d16df7f5f55dbb70459a8df02c76 100644 --- a/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt +++ b/Documentation/devicetree/bindings/gpio/fsl-imx-gpio.txt @@ -8,8 +8,16 @@ Required properties: by low 16 pins and the second one is for high 16 pins. - gpio-controller : Marks the device node as a gpio controller. - #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify optional parameters (currently - unused). + the second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells : Should be 2. The first cell is the GPIO number. + The second cell bits[3:0] is used to specify trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. Example: @@ -19,4 +27,6 @@ gpio0: gpio@73f84000 { interrupts = <50 51>; gpio-controller; #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt index 0c35673f7a3ec16b8415ae1d8f2afa3abfbf3be2..1e677a47b83605ade43d6072711fa19b88e8a33f 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mxs.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mxs.txt @@ -13,8 +13,9 @@ Required properties for GPIO node: - interrupts : Should be the port interrupt shared by all 32 pins. - gpio-controller : Marks the device node as a gpio controller. - #gpio-cells : Should be two. The first cell is the pin number and - the second cell is used to specify optional parameters (currently - unused). + the second cell is used to specify the gpio polarity: + 0 = active high + 1 = active low - interrupt-controller: Marks the device node as an interrupt controller. - #interrupt-cells : Should be 2. The first cell is the GPIO number. The second cell bits[3:0] is used to specify trigger type and level flags: diff --git a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt index ee87467ad8d684d33d43cbd1de95ed85699f3359..8315ac7780ef96429dd4b4dc421aa8ba98558081 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-nmk.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-nmk.txt @@ -26,6 +26,6 @@ Example: #gpio-cells = <2>; gpio-controller; interrupt-controller; - supports-sleepmode; + st,supports-sleepmode; gpio-bank = <1>; }; diff --git a/Documentation/devicetree/bindings/gpio/led.txt b/Documentation/devicetree/bindings/gpio/led.txt index fd2bd56e7195a809dcab552cd070e29aefed2840..9bb308abd2213c3ee061ebbf45389f4643f583ba 100644 --- a/Documentation/devicetree/bindings/gpio/led.txt +++ b/Documentation/devicetree/bindings/gpio/led.txt @@ -55,4 +55,4 @@ run-control { gpios = <&mpc8572 7 0>; default-state = "on"; }; -} +}; diff --git a/Documentation/devicetree/bindings/gpio/gpio_nvidia.txt b/Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt similarity index 100% rename from Documentation/devicetree/bindings/gpio/gpio_nvidia.txt rename to Documentation/devicetree/bindings/gpio/nvidia,tegra20-gpio.txt diff --git a/Documentation/devicetree/bindings/input/fsl-mma8450.txt b/Documentation/devicetree/bindings/input/fsl-mma8450.txt index a00c94ccbdeeb871c440b770de814d11c6f757d7..0b96e5737d3a569ca4acfec137cc6870d1b56880 100644 --- a/Documentation/devicetree/bindings/input/fsl-mma8450.txt +++ b/Documentation/devicetree/bindings/input/fsl-mma8450.txt @@ -2,6 +2,7 @@ Required properties: - compatible : "fsl,mma8450". +- reg: the I2C address of MMA8450 Example: diff --git a/Documentation/devicetree/bindings/input/tegra-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt similarity index 100% rename from Documentation/devicetree/bindings/input/tegra-kbc.txt rename to Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt diff --git a/Documentation/devicetree/bindings/iommu/nvidia,tegra30-smmu.txt b/Documentation/devicetree/bindings/iommu/nvidia,tegra30-smmu.txt new file mode 100644 index 0000000000000000000000000000000000000000..89fb5434b73016958f0c9ac829929cacc0f8045e --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/nvidia,tegra30-smmu.txt @@ -0,0 +1,21 @@ +NVIDIA Tegra 30 IOMMU H/W, SMMU (System Memory Management Unit) + +Required properties: +- compatible : "nvidia,tegra30-smmu" +- reg : Should contain 3 register banks(address and length) for each + of the SMMU register blocks. +- interrupts : Should contain MC General interrupt. +- nvidia,#asids : # of ASIDs +- dma-window : IOVA start address and length. +- nvidia,ahb : phandle to the ahb bus connected to SMMU. + +Example: + smmu { + compatible = "nvidia,tegra30-smmu"; + reg = <0x7000f010 0x02c + 0x7000f1f0 0x010 + 0x7000f228 0x05c>; + nvidia,#asids = <4>; /* # of ASIDs */ + dma-window = <0 0x40000000>; /* IOVA start & length */ + nvidia,ahb = <&ahb>; + }; diff --git a/Documentation/devicetree/bindings/mfd/mc13xxx.txt b/Documentation/devicetree/bindings/mfd/mc13xxx.txt index 19f6af47a792986c23a9ed033e15e8639ec5c51b..baf07987ae6863c68b39efa5ba1227a327009337 100644 --- a/Documentation/devicetree/bindings/mfd/mc13xxx.txt +++ b/Documentation/devicetree/bindings/mfd/mc13xxx.txt @@ -46,8 +46,8 @@ Examples: ecspi@70010000 { /* ECSPI1 */ fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */ - <&gpio3 25 0>; /* GPIO4_25 */ + cs-gpios = <&gpio4 24 0>, /* GPIO4_24 */ + <&gpio4 25 0>; /* GPIO4_25 */ status = "okay"; pmic: mc13892@0 { diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt index 645f5eaadb3f07dba8550f5a41acbc5f02899362..d2802d4717bcfe70c146c95a1bc430807feae514 100644 --- a/Documentation/devicetree/bindings/mfd/tps65910.txt +++ b/Documentation/devicetree/bindings/mfd/tps65910.txt @@ -17,18 +17,46 @@ Required properties: device need to be present. The definition for each of these nodes is defined using the standard binding for regulators found at Documentation/devicetree/bindings/regulator/regulator.txt. + The regulator is matched with the regulator-compatible. - The valid names for regulators are: + The valid regulator-compatible values are: tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1, vaux2, vaux33, vmmc tps65911: vrtc, vio, vdd1, vdd3, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8 +- xxx-supply: Input voltage supply regulator. + These entries are require if regulators are enabled for a device. Missing of these + properties can cause the regulator registration fails. + If some of input supply is powered through battery or always-on supply then + also it is require to have these parameters with proper node handle of always + on power supply. + tps65910: + vcc1-supply: VDD1 input. + vcc2-supply: VDD2 input. + vcc3-supply: VAUX33 and VMMC input. + vcc4-supply: VAUX1 and VAUX2 input. + vcc5-supply: VPLL and VDAC input. + vcc6-supply: VDIG1 and VDIG2 input. + vcc7-supply: VRTC input. + vccio-supply: VIO input. + tps65911: + vcc1-supply: VDD1 input. + vcc2-supply: VDD2 input. + vcc3-supply: LDO6, LDO7 and LDO8 input. + vcc4-supply: LDO5 input. + vcc5-supply: LDO3 and LDO4 input. + vcc6-supply: LDO1 and LDO2 input. + vcc7-supply: VRTC input. + vccio-supply: VIO input. + Optional properties: - ti,vmbch-threshold: (tps65911) main battery charged threshold comparator. (see VMBCH_VSEL in TPS65910 datasheet) - ti,vmbch2-threshold: (tps65911) main battery discharged threshold comparator. (see VMBCH_VSEL in TPS65910 datasheet) +- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL + in TPS6591X datasheet) - ti,en-gpio-sleep: enable sleep control for gpios There should be 9 entries here, one for each gpio. @@ -56,74 +84,110 @@ Example: ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; + vcc1-supply = <®_parent>; + vcc2-supply = <&some_reg>; + vcc3-supply = <...>; + vcc4-supply = <...>; + vcc5-supply = <...>; + vcc6-supply = <...>; + vcc7-supply = <...>; + vccio-supply = <...>; + regulators { - vdd1_reg: vdd1 { + #address-cells = <1>; + #size-cells = <0>; + + vdd1_reg: regulator@0 { + regulator-compatible = "vdd1"; + reg = <0>; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; ti,regulator-ext-sleep-control = <0>; }; - vdd2_reg: vdd2 { + vdd2_reg: regulator@1 { + regulator-compatible = "vdd2"; + reg = <1>; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1500000>; regulator-always-on; regulator-boot-on; ti,regulator-ext-sleep-control = <4>; }; - vddctrl_reg: vddctrl { + vddctrl_reg: regulator@2 { + regulator-compatible = "vddctrl"; + reg = <2>; regulator-min-microvolt = < 600000>; regulator-max-microvolt = <1400000>; regulator-always-on; regulator-boot-on; ti,regulator-ext-sleep-control = <0>; }; - vio_reg: vio { + vio_reg: regulator@3 { + regulator-compatible = "vio"; + reg = <3>; regulator-min-microvolt = <1500000>; regulator-max-microvolt = <1800000>; regulator-always-on; regulator-boot-on; ti,regulator-ext-sleep-control = <1>; }; - ldo1_reg: ldo1 { + ldo1_reg: regulator@4 { + regulator-compatible = "ldo1"; + reg = <4>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; ti,regulator-ext-sleep-control = <0>; }; - ldo2_reg: ldo2 { + ldo2_reg: regulator@5 { + regulator-compatible = "ldo2"; + reg = <5>; regulator-min-microvolt = <1050000>; regulator-max-microvolt = <1050000>; ti,regulator-ext-sleep-control = <0>; }; - ldo3_reg: ldo3 { + ldo3_reg: regulator@6 { + regulator-compatible = "ldo3"; + reg = <6>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; ti,regulator-ext-sleep-control = <0>; }; - ldo4_reg: ldo4 { + ldo4_reg: regulator@7 { + regulator-compatible = "ldo4"; + reg = <7>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; regulator-always-on; ti,regulator-ext-sleep-control = <0>; }; - ldo5_reg: ldo5 { + ldo5_reg: regulator@8 { + regulator-compatible = "ldo5"; + reg = <8>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; ti,regulator-ext-sleep-control = <0>; }; - ldo6_reg: ldo6 { + ldo6_reg: regulator@9 { + regulator-compatible = "ldo6"; + reg = <9>; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; ti,regulator-ext-sleep-control = <0>; }; - ldo7_reg: ldo7 { + ldo7_reg: regulator@10 { + regulator-compatible = "ldo7"; + reg = <10>; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; regulator-always-on; regulator-boot-on; ti,regulator-ext-sleep-control = <1>; }; - ldo8_reg: ldo8 { + ldo8_reg: regulator@11 { + regulator-compatible = "ldo8"; + reg = <11>; regulator-min-microvolt = <1000000>; regulator-max-microvolt = <3300000>; regulator-always-on; diff --git a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt index 0d93b4b0e0e3733f77d0b668f166f2a3ba983555..bd9be0b5bc2034279d628f07eece8a3d9c2b394d 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-esdhc.txt @@ -3,21 +3,22 @@ The Enhanced Secure Digital Host Controller provides an interface for MMC, SD, and SDIO types of memory cards. +This file documents differences between the core properties described +by mmc.txt and the properties used by the sdhci-esdhc driver. + Required properties: - - compatible : should be - "fsl,-esdhc", "fsl,esdhc" - - reg : should contain eSDHC registers location and length. - - interrupts : should contain eSDHC interrupt. - interrupt-parent : interrupt source phandle. - clock-frequency : specifies eSDHC base clock frequency. - - sdhci,wp-inverted : (optional) specifies that eSDHC controller - reports inverted write-protect state; New devices should use - the generic "wp-inverted" property. - - sdhci,1-bit-only : (optional) specifies that a controller can - only handle 1-bit data transfers. New devices should use the - generic "bus-width = <1>" property. - - sdhci,auto-cmd12: (optional) specifies that a controller can - only handle auto CMD12. + +Optional properties: + - sdhci,wp-inverted : specifies that eSDHC controller reports + inverted write-protect state; New devices should use the generic + "wp-inverted" property. + - sdhci,1-bit-only : specifies that a controller can only handle + 1-bit data transfers. New devices should use the generic + "bus-width = <1>" property. + - sdhci,auto-cmd12: specifies that a controller can only handle auto + CMD12. Example: diff --git a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt index c7e404b3ef0515b5527583cae877ab48c5d69595..70cd49b1caa8c07e71b7d0855a9469fc989cb7f6 100644 --- a/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt +++ b/Documentation/devicetree/bindings/mmc/fsl-imx-esdhc.txt @@ -3,17 +3,15 @@ The Enhanced Secure Digital Host Controller on Freescale i.MX family provides an interface for MMC, SD, and SDIO types of memory cards. +This file documents differences between the core properties described +by mmc.txt and the properties used by the sdhci-esdhc-imx driver. + Required properties: - compatible : Should be "fsl,-esdhc" -- reg : Should contain eSDHC registers location and length -- interrupts : Should contain eSDHC interrupt Optional properties: -- non-removable : Indicate the card is wired to host permanently - fsl,cd-internal : Indicate to use controller internal card detection - fsl,wp-internal : Indicate to use controller internal write protection -- cd-gpios : Specify GPIOs for card detection -- wp-gpios : Specify GPIOs for write protection Examples: @@ -29,6 +27,6 @@ esdhc@70008000 { compatible = "fsl,imx51-esdhc"; reg = <0x70008000 0x4000>; interrupts = <2>; - cd-gpios = <&gpio0 6 0>; /* GPIO1_6 */ - wp-gpios = <&gpio0 5 0>; /* GPIO1_5 */ + cd-gpios = <&gpio1 6 0>; /* GPIO1_6 */ + wp-gpios = <&gpio1 5 0>; /* GPIO1_5 */ }; diff --git a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt index d64aea5a42032414fa99d1fa43fb0dc20114c254..0e5e2ec4001dda10fe1b35b57d8ecbe976febf0a 100644 --- a/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt +++ b/Documentation/devicetree/bindings/mmc/mmc-spi-slot.txt @@ -1,8 +1,9 @@ MMC/SD/SDIO slot directly connected to a SPI bus +This file documents differences between the core properties described +by mmc.txt and the properties used by the mmc_spi driver. + Required properties: -- compatible : should be "mmc-spi-slot". -- reg : should specify SPI address (chip-select number). - spi-max-frequency : maximum frequency for this device (Hz). - voltage-ranges : two cells are required, first cell specifies minimum slot voltage (mV), second cell specifies maximum slot voltage (mV). @@ -11,8 +12,7 @@ Required properties: Optional properties: - gpios : may specify GPIOs in this order: Card-Detect GPIO, Write-Protect GPIO. Note that this does not follow the - binding from mmc.txt, for historic reasons. -- interrupts : the interrupt of a card detect interrupt. + binding from mmc.txt, for historical reasons. - interrupt-parent : the phandle for the interrupt controller that services interrupts for this device. diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 6e70dcde0a71e0f997abb0f5abdf10146aaaefb3..8a6811f4a02f5759e2a793506f1cef40b756e2d8 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -2,13 +2,17 @@ These properties are common to multiple MMC host controllers. Any host that requires the respective functionality should implement them using these definitions. +Interpreted by the OF core: +- reg: Registers location and length. +- interrupts: Interrupts used by the MMC controller. + Required properties: - bus-width: Number of data lines, can be <1>, <4>, or <8> Optional properties: -- cd-gpios : Specify GPIOs for card detection, see gpio binding -- wp-gpios : Specify GPIOs for write protection, see gpio binding -- cd-inverted: when present, polarity on the wp gpio line is inverted +- cd-gpios: Specify GPIOs for card detection, see gpio binding +- wp-gpios: Specify GPIOs for write protection, see gpio binding +- cd-inverted: when present, polarity on the cd gpio line is inverted - wp-inverted: when present, polarity on the wp gpio line is inverted - non-removable: non-removable slot (like eMMC) - max-frequency: maximum operating clock frequency diff --git a/Documentation/devicetree/bindings/mmc/mmci.txt b/Documentation/devicetree/bindings/mmc/mmci.txt index 14a81d5261182aa7f2775bc3ef543785122ae494..2b584cae352ae72f093c0e470ad436ada0b5598f 100644 --- a/Documentation/devicetree/bindings/mmc/mmci.txt +++ b/Documentation/devicetree/bindings/mmc/mmci.txt @@ -1,19 +1,15 @@ * ARM PrimeCell MultiMedia Card Interface (MMCI) PL180/1 -The ARM PrimeCell MMCI PL180 and PL181 provides and interface for +The ARM PrimeCell MMCI PL180 and PL181 provides an interface for reading and writing to MultiMedia and SD cards alike. +This file documents differences between the core properties described +by mmc.txt and the properties used by the mmci driver. + Required properties: - compatible : contains "arm,pl18x", "arm,primecell". -- reg : contains pl18x registers and length. -- interrupts : contains the device IRQ(s). - arm,primecell-periphid : contains the PrimeCell Peripheral ID. Optional properties: -- wp-gpios : contains any write protect (ro) gpios -- cd-gpios : contains any card detection gpios -- cd-inverted : indicates whether the cd gpio is inverted -- max-frequency : contains the maximum operating frequency -- bus-width : number of data lines, can be <1>, <4>, or <8> - mmc-cap-mmc-highspeed : indicates whether MMC is high speed capable - mmc-cap-sd-highspeed : indicates whether SD is high speed capable diff --git a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt index 14d870a9e3db521c84311ac1fd80b57edd78f0a4..54949f6faedebf3ba54825bd62fb1a1ab254cf95 100644 --- a/Documentation/devicetree/bindings/mmc/mxs-mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mxs-mmc.txt @@ -3,16 +3,14 @@ The Freescale MXS Synchronous Serial Ports (SSP) can act as a MMC controller to support MMC, SD, and SDIO types of memory cards. +This file documents differences between the core properties in mmc.txt +and the properties used by the mxsmmc driver. + Required properties: - compatible: Should be "fsl,-mmc". The supported chips include imx23 and imx28. -- reg: Should contain registers location and length - interrupts: Should contain ERROR and DMA interrupts - fsl,ssp-dma-channel: APBH DMA channel for the SSP -- bus-width: Number of data lines, can be <1>, <4>, or <8> - -Optional properties: -- wp-gpios: Specify GPIOs for write protection Examples: diff --git a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt similarity index 67% rename from Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt rename to Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt index f77c3031607fbea26a250e3f7fcdd6373089dfff..c6d7b11db9eb00ed81ad3fcff3ddb78c9dbdc072 100644 --- a/Documentation/devicetree/bindings/mmc/nvidia-sdhci.txt +++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt @@ -3,15 +3,13 @@ This controller on Tegra family SoCs provides an interface for MMC, SD, and SDIO types of memory cards. +This file documents differences between the core properties described +by mmc.txt and the properties used by the sdhci-tegra driver. + Required properties: - compatible : Should be "nvidia,-sdhci" -- reg : Should contain SD/MMC registers location and length -- interrupts : Should contain SD/MMC interrupt -- bus-width : Number of data lines, can be <1>, <4>, or <8> Optional properties: -- cd-gpios : Specify GPIOs for card detection -- wp-gpios : Specify GPIOs for write protection - power-gpios : Specify GPIOs for power control Example: diff --git a/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt new file mode 100644 index 0000000000000000000000000000000000000000..dbe98a3c183a53b534ef7fbfbafcd481ba516deb --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-pxa.txt @@ -0,0 +1,21 @@ +* Marvell sdhci-pxa v2/v3 controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers. + +Required properties: +- compatible: Should be "mrvl,pxav2-mmc" or "mrvl,pxav3-mmc". + +Optional properties: +- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning. + +Example: + +sdhci@d4280800 { + compatible = "mrvl,pxav3-mmc"; + reg = <0xd4280800 0x800>; + bus-width = <8>; + interrupts = <27>; + non-removable; + mrvl,clk-delay-cycles = <31>; +}; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index 8a53958c9a9f50e71073daa1b8aa0650308ea13c..be76a23b34c408133bb1d397c2c3395cac59c66a 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -3,21 +3,20 @@ The Highspeed MMC Host Controller on TI OMAP family provides an interface for MMC, SD, and SDIO types of memory cards. +This file documents differences between the core properties described +by mmc.txt and the properties used by the omap_hsmmc driver. + Required properties: - compatible: Should be "ti,omap2-hsmmc", for OMAP2 controllers Should be "ti,omap3-hsmmc", for OMAP3 controllers Should be "ti,omap4-hsmmc", for OMAP4 controllers - ti,hwmods: Must be "mmc", n is controller instance starting 1 -- reg : should contain hsmmc registers location and length Optional properties: ti,dual-volt: boolean, supports dual voltage cards -supply: phandle to the regulator device tree node "supply-name" examples are "vmmc", "vmmc_aux" etc -bus-width: Number of data lines, default assumed is 1 if the property is missing. -cd-gpios: GPIOs for card detection -wp-gpios: GPIOs for write protection ti,non-removable: non-removable slot (like eMMC) ti,needs-special-reset: Requires a special softreset sequence diff --git a/Documentation/devicetree/bindings/mtd/partition.txt b/Documentation/devicetree/bindings/mtd/partition.txt index f114ce1657c218056a4ccdce2f2d119bfceced4b..6e1f61f1e789699082d7eef9d893a03280f2c039 100644 --- a/Documentation/devicetree/bindings/mtd/partition.txt +++ b/Documentation/devicetree/bindings/mtd/partition.txt @@ -35,4 +35,4 @@ flash@0 { uimage@100000 { reg = <0x0100000 0x200000>; }; -]; +}; diff --git a/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt b/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt new file mode 100644 index 0000000000000000000000000000000000000000..7c86d5e28a0ed5a5d2c959db0d8b15d02aa1c89f --- /dev/null +++ b/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt @@ -0,0 +1,29 @@ +The Broadcom BCM87XX devices are a family of 10G Ethernet PHYs. They +have these bindings in addition to the standard PHY bindings. + +Compatible: Should contain "broadcom,bcm8706" or "broadcom,bcm8727" and + "ethernet-phy-ieee802.3-c45" + +Optional Properties: + +- broadcom,c45-reg-init : one of more sets of 4 cells. The first cell + is the MDIO Manageable Device (MMD) address, the second a register + address within the MMD, the third cell contains a mask to be ANDed + with the existing register value, and the fourth cell is ORed with + he result to yield the new register value. If the third cell has a + value of zero, no read of the existing value is performed. + +Example: + + ethernet-phy@5 { + reg = <5>; + compatible = "broadcom,bcm8706", "ethernet-phy-ieee802.3-c45"; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + /* + * Set PMD Digital Control Register for + * GPIO[1] Tx/Rx + * GPIO[0] R64 Sync Acquired + */ + broadcom,c45-reg-init = <1 0xc808 0xff8f 0x70>; + }; diff --git a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt index f31b686d45564e17398006841ba4a0ba51816974..8ff324eaa8892f21fb2d55c6cc2830d630613785 100644 --- a/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt +++ b/Documentation/devicetree/bindings/net/can/fsl-flexcan.txt @@ -11,6 +11,9 @@ Required properties: - reg : Offset and length of the register set for this device - interrupts : Interrupt tuple for this device + +Optional properties: + - clock-frequency : The oscillator frequency driving the flexcan device Example: diff --git a/Documentation/devicetree/bindings/net/davinci_emac.txt b/Documentation/devicetree/bindings/net/davinci_emac.txt new file mode 100644 index 0000000000000000000000000000000000000000..48b259e29e873f71f3ccfd0a6877bffa609ebd39 --- /dev/null +++ b/Documentation/devicetree/bindings/net/davinci_emac.txt @@ -0,0 +1,41 @@ +* Texas Instruments Davinci EMAC + +This file provides information, what the device node +for the davinci_emac interface contains. + +Required properties: +- compatible: "ti,davinci-dm6467-emac"; +- reg: Offset and length of the register set for the device +- ti,davinci-ctrl-reg-offset: offset to control register +- ti,davinci-ctrl-mod-reg-offset: offset to control module register +- ti,davinci-ctrl-ram-offset: offset to control module ram +- ti,davinci-ctrl-ram-size: size of control module ram +- ti,davinci-rmii-en: use RMII +- ti,davinci-no-bd-ram: has the emac controller BD RAM +- phy-handle: Contains a phandle to an Ethernet PHY. + if not, davinci_emac driver defaults to 100/FULL +- interrupts: interrupt mapping for the davinci emac interrupts sources: + 4 sources: + +Optional properties: +- local-mac-address : 6 bytes, mac address + +Example (enbw_cmc board): + eth0: emac@1e20000 { + compatible = "ti,davinci-dm6467-emac"; + reg = <0x220000 0x4000>; + ti,davinci-ctrl-reg-offset = <0x3000>; + ti,davinci-ctrl-mod-reg-offset = <0x2000>; + ti,davinci-ctrl-ram-offset = <0>; + ti,davinci-ctrl-ram-size = <0x2000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <33 + 34 + 35 + 36 + >; + interrupt-parent = <&intc>; + }; diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 7ab9e1a2d8bec19fac2283b5703fae60d2858998..d5363922140322913e171fac6c98f7df2d0b0665 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -7,10 +7,14 @@ Required properties: - phy-mode : String, operation mode of the PHY interface. Supported values are: "mii", "gmii", "sgmii", "tbi", "rmii", "rgmii", "rgmii-id", "rgmii-rxid", "rgmii-txid", "rtbi", "smii". -- phy-reset-gpios : Should specify the gpio for phy reset Optional properties: - local-mac-address : 6 bytes, mac address +- phy-reset-gpios : Should specify the gpio for phy reset +- phy-reset-duration : Reset duration in milliseconds. Should present + only if property "phy-reset-gpios" is available. Missing the property + will have the duration be 1 millisecond. Numbers greater than 1000 are + invalid and 1 millisecond will be used instead. Example: @@ -19,6 +23,6 @@ ethernet@83fec000 { reg = <0x83fec000 0x4000>; interrupts = <87>; phy-mode = "mii"; - phy-reset-gpios = <&gpio1 14 0>; /* GPIO2_14 */ + phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */ local-mac-address = [00 04 9F 01 1B B9]; }; diff --git a/Documentation/devicetree/bindings/net/phy.txt b/Documentation/devicetree/bindings/net/phy.txt index bb8c742eb8c59b5b70dd7c65cbd40d22324a6c7c..7cd18fbfcf71e702249d1f1aeada02611e2bed52 100644 --- a/Documentation/devicetree/bindings/net/phy.txt +++ b/Documentation/devicetree/bindings/net/phy.txt @@ -14,10 +14,20 @@ Required properties: - linux,phandle : phandle for this node; likely referenced by an ethernet controller node. +Optional Properties: + +- compatible: Compatible list, may contain + "ethernet-phy-ieee802.3-c22" or "ethernet-phy-ieee802.3-c45" for + PHYs that implement IEEE802.3 clause 22 or IEEE802.3 clause 45 + specifications. If neither of these are specified, the default is to + assume clause 22. The compatible list may also contain other + elements. + Example: ethernet-phy@0 { - linux,phandle = <2452000> + compatible = "ethernet-phy-ieee802.3-c22"; + linux,phandle = <2452000>; interrupt-parent = <40000>; interrupts = <35 1>; reg = <0>; diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index 1f62623f8c3f22ff1a25ee4ef56ceeb43e74e9e1..060bbf098ef3415be633a539b626977ebfcf4b47 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -1,7 +1,8 @@ * STMicroelectronics 10/100/1000 Ethernet driver (GMAC) Required properties: -- compatible: Should be "st,spear600-gmac" +- compatible: Should be "snps,dwmac-" "snps,dwmac" + For backwards compatibility: "st,spear600-gmac" is also supported. - reg: Address and length of the register set for the device - interrupt-parent: Should be the phandle for the interrupt controller that services interrupts for this device diff --git a/Documentation/devicetree/bindings/nvec/nvec_nvidia.txt b/Documentation/devicetree/bindings/nvec/nvidia,nvec.txt similarity index 100% rename from Documentation/devicetree/bindings/nvec/nvec_nvidia.txt rename to Documentation/devicetree/bindings/nvec/nvidia,nvec.txt diff --git a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt index 82b43f9158579cdf94b4134ab59d111f45c08a11..a4119f6422d9527e1a5e50d672c70b62aa9d0ad3 100644 --- a/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/fsl,imx6q-pinctrl.txt @@ -1626,3 +1626,5 @@ MX6Q_PAD_SD2_DAT3__PCIE_CTRL_MUX_11 1587 MX6Q_PAD_SD2_DAT3__GPIO_1_12 1588 MX6Q_PAD_SD2_DAT3__SJC_DONE 1589 MX6Q_PAD_SD2_DAT3__ANATOP_TESTO_3 1590 +MX6Q_PAD_ENET_RX_ER__ANATOP_USBOTG_ID 1591 +MX6Q_PAD_GPIO_1__ANATOP_USBOTG_ID 1592 diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt new file mode 100644 index 0000000000000000000000000000000000000000..5187f0dd8b2864c7bc95282b1250688f36500e5a --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt @@ -0,0 +1,93 @@ +One-register-per-pin type device tree based pinctrl driver + +Required properties: +- compatible : "pinctrl-single" + +- reg : offset and length of the register set for the mux registers + +- pinctrl-single,register-width : pinmux register access width in bits + +- pinctrl-single,function-mask : mask of allowed pinmux function bits + in the pinmux register + +Optional properties: +- pinctrl-single,function-off : function off mode for disabled state if + available and same for all registers; if not specified, disabling of + pin functions is ignored + +This driver assumes that there is only one register for each pin, +and uses the common pinctrl bindings as specified in the pinctrl-bindings.txt +document in this directory. + +The pin configuration nodes for pinctrl-single are specified as pinctrl +register offset and value pairs using pinctrl-single,pins. Only the bits +specified in pinctrl-single,function-mask are updated. For example, setting +a pin for a device could be done with: + + pinctrl-single,pins = <0xdc 0x118>; + +Where 0xdc is the offset from the pinctrl register base address for the +device pinctrl register, and 0x118 contains the desired value of the +pinctrl register. See the device example and static board pins example +below for more information. + +Example: + +/* SoC common file */ + +/* first controller instance for pins in core domain */ +pmx_core: pinmux@4a100040 { + compatible = "pinctrl-single"; + reg = <0x4a100040 0x0196>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xffff>; +}; + +/* second controller instance for pins in wkup domain */ +pmx_wkup: pinmux@4a31e040 { + compatible = "pinctrl-single; + reg = <0x4a31e040 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0xffff>; +}; + + +/* board specific .dts file */ + +&pmx_core { + + /* + * map all board specific static pins enabled by the pinctrl driver + * itself during the boot (or just set them up in the bootloader) + */ + pinctrl-names = "default"; + pinctrl-0 = <&board_pins>; + + board_pins: pinmux_board_pins { + pinctrl-single,pins = < + 0x6c 0xf + 0x6e 0xf + 0x70 0xf + 0x72 0xf + >; + }; + + /* map uart2 pins */ + uart2_pins: pinmux_uart2_pins { + pinctrl-single,pins = < + 0xd8 0x118 + 0xda 0 + 0xdc 0x118 + 0xde 0 + >; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_pins>; +}; diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt index 2f5b6b1ba15f9c97c64b483fc1ad8f1a31ee6053..4fae41d547984297d0f427d22baa672a1ffedea2 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt @@ -10,6 +10,7 @@ Optional properties: If this property is missing, the default assumed is Active low. - gpio-open-drain: GPIO is open drain type. If this property is missing then default assumption is false. +-vin-supply: Input supply name. Any property defined as part of the core regulator binding, defined in regulator.txt, can also be used. @@ -29,4 +30,5 @@ Example: enable-active-high; regulator-boot-on; gpio-open-drain; + vin-supply = <&parent_reg>; }; diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 5b7a408acdaa2ddd09aacab5d8ab402f52f00389..66ece3f87bbc09d755973b7580944fea3cb60971 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -10,6 +10,11 @@ Optional properties: - regulator-always-on: boolean, regulator should never be disabled - regulator-boot-on: bootloader/firmware enabled regulator - -supply: phandle to the parent supply/regulator node +- regulator-ramp-delay: ramp delay for regulator(in uV/uS) +- regulator-compatible: If a regulator chip contains multiple + regulators, and if the chip's binding contains a child node that + describes each regulator, then this property indicates which regulator + this child node is intended to configure. Example: diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt new file mode 100644 index 0000000000000000000000000000000000000000..0487e9675ba0675bbe6beaf5aa5526891c413ab1 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt @@ -0,0 +1,91 @@ +TPS65217 family of regulators + +Required properties: +- compatible: "ti,tps65217" +- reg: I2C slave address +- regulators: list of regulators provided by this controller, must be named + after their hardware counterparts: dcdc[1-3] and ldo[1-4] +- regulators: This is the list of child nodes that specify the regulator + initialization data for defined regulators. Not all regulators for the given + device need to be present. The definition for each of these nodes is defined + using the standard binding for regulators found at + Documentation/devicetree/bindings/regulator/regulator.txt. + + The valid names for regulators are: + tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4 + +Each regulator is defined using the standard binding for regulators. + +Example: + + tps: tps@24 { + compatible = "ti,tps65217"; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + + dcdc1_reg: regulator@0 { + reg = <0>; + regulator-compatible = "dcdc1"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2_reg: regulator@1 { + reg = <1>; + regulator-compatible = "dcdc2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3_reg: regulator@2 { + reg = <2>; + regulator-compatible = "dcdc3"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: regulator@3 { + reg = <3>; + regulator-compatible = "ldo1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo2"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4_reg: regulator@6 { + reg = <6>; + regulator-compatible = "ldo4"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt index 0fcabaa3baa344fa9a2ec676bfec2ab999a38891..d156e1b5db1233c5ffdb2c0f54e1f5bd6234da34 100644 --- a/Documentation/devicetree/bindings/regulator/tps6586x.txt +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -6,8 +6,17 @@ Required properties: - interrupts: the interrupt outputs of the controller - #gpio-cells: number of cells to describe a GPIO - gpio-controller: mark the device as a GPIO controller -- regulators: list of regulators provided by this controller, must be named - after their hardware counterparts: sm[0-2], ldo[0-9] and ldo_rtc +- regulators: list of regulators provided by this controller, must have + property "regulator-compatible" to match their hardware counterparts: + sm[0-2], ldo[0-9] and ldo_rtc +- sm0-supply: The input supply for the SM0. +- sm1-supply: The input supply for the SM1. +- sm2-supply: The input supply for the SM2. +- vinldo01-supply: The input supply for the LDO1 and LDO2 +- vinldo23-supply: The input supply for the LDO2 and LDO3 +- vinldo4-supply: The input supply for the LDO4 +- vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8 +- vinldo9-supply: The input supply for the LDO9 Each regulator is defined using the standard binding for regulators. @@ -21,75 +30,113 @@ Example: #gpio-cells = <2>; gpio-controller; + sm0-supply = <&some_reg>; + sm1-supply = <&some_reg>; + sm2-supply = <&some_reg>; + vinldo01-supply = <...>; + vinldo23-supply = <...>; + vinldo4-supply = <...>; + vinldo678-supply = <...>; + vinldo9-supply = <...>; + regulators { - sm0_reg: sm0 { + #address-cells = <1>; + #size-cells = <0>; + + sm0_reg: regulator@0 { + reg = <0>; + regulator-compatible = "sm0"; regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; - sm1_reg: sm1 { + sm1_reg: regulator@1 { + reg = <1>; + regulator-compatible = "sm1"; regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; regulator-boot-on; regulator-always-on; }; - sm2_reg: sm2 { + sm2_reg: regulator@2 { + reg = <2>; + regulator-compatible = "sm2"; regulator-min-microvolt = <3000000>; regulator-max-microvolt = <4550000>; regulator-boot-on; regulator-always-on; }; - ldo0_reg: ldo0 { + ldo0_reg: regulator@3 { + reg = <3>; + regulator-compatible = "ldo0"; regulator-name = "PCIE CLK"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; - ldo1_reg: ldo1 { + ldo1_reg: regulator@4 { + reg = <4>; + regulator-compatible = "ldo1"; regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; }; - ldo2_reg: ldo2 { + ldo2_reg: regulator@5 { + reg = <5>; + regulator-compatible = "ldo2"; regulator-min-microvolt = < 725000>; regulator-max-microvolt = <1500000>; }; - ldo3_reg: ldo3 { + ldo3_reg: regulator@6 { + reg = <6>; + regulator-compatible = "ldo3"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo4_reg: ldo4 { + ldo4_reg: regulator@7 { + reg = <7>; + regulator-compatible = "ldo4"; regulator-min-microvolt = <1700000>; regulator-max-microvolt = <2475000>; }; - ldo5_reg: ldo5 { + ldo5_reg: regulator@8 { + reg = <8>; + regulator-compatible = "ldo5"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo6_reg: ldo6 { + ldo6_reg: regulator@9 { + reg = <9>; + regulator-compatible = "ldo6"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo7_reg: ldo7 { + ldo7_reg: regulator@10 { + reg = <10>; + regulator-compatible = "ldo7"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo8_reg: ldo8 { + ldo8_reg: regulator@11 { + reg = <11>; + regulator-compatible = "ldo8"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; - ldo9_reg: ldo9 { + ldo9_reg: regulator@12 { + reg = <12>; + regulator-compatible = "ldo9"; regulator-min-microvolt = <1250000>; regulator-max-microvolt = <3300000>; }; diff --git a/Documentation/devicetree/bindings/regulator/twl-regulator.txt b/Documentation/devicetree/bindings/regulator/twl-regulator.txt index 0c3395d55ac19afde8c334fc096dc937a1e9ca19..658749b90b970e0d309c656d3c389d9730f81a1b 100644 --- a/Documentation/devicetree/bindings/regulator/twl-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/twl-regulator.txt @@ -15,7 +15,6 @@ For twl6030 regulators/LDOs - "ti,twl6030-vusb" for VUSB LDO - "ti,twl6030-v1v8" for V1V8 LDO - "ti,twl6030-v2v1" for V2V1 LDO - - "ti,twl6030-clk32kg" for CLK32KG RESOURCE - "ti,twl6030-vdd1" for VDD1 SMPS - "ti,twl6030-vdd2" for VDD2 SMPS - "ti,twl6030-vdd3" for VDD3 SMPS diff --git a/Documentation/devicetree/bindings/rtc/dw-apb.txt b/Documentation/devicetree/bindings/rtc/dw-apb.txt new file mode 100644 index 0000000000000000000000000000000000000000..93e2b0f048e6128a28a6e523dab251cb41df01d6 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/dw-apb.txt @@ -0,0 +1,25 @@ +* Designware APB timer + +Required properties: +- compatible: "snps,dw-apb-timer-sp" or "snps,dw-apb-timer-osc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: IRQ line for the timer. +- clock-frequency: The frequency in HZ of the timer. +- clock-freq: For backwards compatibility with picoxcell + +Example: + + timer1: timer@ffc09000 { + compatible = "snps,dw-apb-timer-sp"; + interrupts = <0 168 4>; + clock-frequency = <200000000>; + reg = <0xffc09000 0x1000>; + }; + + timer2: timer@ffd00000 { + compatible = "snps,dw-apb-timer-osc"; + interrupts = <0 169 4>; + clock-frequency = <200000000>; + reg = <0xffd00000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt new file mode 100644 index 0000000000000000000000000000000000000000..b800070fe6e90e5a2f4d5bceb2c81e92feeb2903 --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/stmp3xxx-rtc.txt @@ -0,0 +1,16 @@ +* STMP3xxx/i.MX28 Time Clock controller + +Required properties: +- compatible: should be one of the following. + * "fsl,stmp3xxx-rtc" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: rtc alarm interrupt + +Example: + +rtc@80056000 { + compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; + reg = <0x80056000 2000>; + interrupts = <29>; +}; diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-alc5632.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt similarity index 100% rename from Documentation/devicetree/bindings/sound/tegra-audio-alc5632.txt rename to Documentation/devicetree/bindings/sound/nvidia,tegra-audio-alc5632.txt diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt similarity index 100% rename from Documentation/devicetree/bindings/sound/tegra-audio-trimslice.txt rename to Documentation/devicetree/bindings/sound/nvidia,tegra-audio-trimslice.txt diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt similarity index 100% rename from Documentation/devicetree/bindings/sound/tegra-audio-wm8753.txt rename to Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8753.txt diff --git a/Documentation/devicetree/bindings/sound/tegra-audio-wm8903.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt similarity index 100% rename from Documentation/devicetree/bindings/sound/tegra-audio-wm8903.txt rename to Documentation/devicetree/bindings/sound/nvidia,tegra-audio-wm8903.txt diff --git a/Documentation/devicetree/bindings/sound/tegra20-das.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-das.txt similarity index 100% rename from Documentation/devicetree/bindings/sound/tegra20-das.txt rename to Documentation/devicetree/bindings/sound/nvidia,tegra20-das.txt diff --git a/Documentation/devicetree/bindings/sound/tegra20-i2s.txt b/Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt similarity index 100% rename from Documentation/devicetree/bindings/sound/tegra20-i2s.txt rename to Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt diff --git a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt index 9841057d112bb6e4c46299166ef7c5a9a6da5521..4256a6df9b79355d8c17f5f393c3956d6a5a78ca 100644 --- a/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt +++ b/Documentation/devicetree/bindings/spi/fsl-imx-cspi.txt @@ -17,6 +17,6 @@ ecspi@70010000 { reg = <0x70010000 0x4000>; interrupts = <36>; fsl,spi-num-chipselects = <2>; - cs-gpios = <&gpio3 24 0>, /* GPIO4_24 */ - <&gpio3 25 0>; /* GPIO4_25 */ + cs-gpios = <&gpio3 24 0>, /* GPIO3_24 */ + <&gpio3 25 0>; /* GPIO3_25 */ }; diff --git a/Documentation/devicetree/bindings/spi/spi_nvidia.txt b/Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt similarity index 100% rename from Documentation/devicetree/bindings/spi/spi_nvidia.txt rename to Documentation/devicetree/bindings/spi/nvidia,tegra20-spi.txt diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt new file mode 100644 index 0000000000000000000000000000000000000000..a15ffeddfba43744f843a7a91386b15b8da60a63 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt @@ -0,0 +1,116 @@ +* Samsung SPI Controller + +The Samsung SPI controller is used to interface with various devices such as flash +and display controllers using the SPI communication interface. + +Required SoC Specific Properties: + +- compatible: should be one of the following. + - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms + - samsung,s3c6410-spi: for s3c6410 platforms + - samsung,s5p6440-spi: for s5p6440 and s5p6450 platforms + - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms + - samsung,exynos4210-spi: for exynos4 and exynos5 platforms + +- reg: physical base address of the controller and length of memory mapped + region. + +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. + +[PRELIMINARY: the dma channel allocation will change once there are +official DMA bindings] + +- tx-dma-channel: The dma channel specifier for tx operations. The format of + the dma specifier depends on the dma controller. + +- rx-dma-channel: The dma channel specifier for rx operations. The format of + the dma specifier depends on the dma controller. + +Required Board Specific Properties: + +- #address-cells: should be 1. +- #size-cells: should be 0. +- gpios: The gpio specifier for clock, mosi and miso interface lines (in the + order specified). The format of the gpio specifier depends on the gpio + controller. + +Optional Board Specific Properties: + +- samsung,spi-src-clk: If the spi controller includes a internal clock mux to + select the clock source for the spi bus clock, this property can be used to + indicate the clock to be used for driving the spi bus clock. If not specified, + the clock number 0 is used as default. + +- num-cs: Specifies the number of chip select lines supported. If + not specified, the default number of chip select lines is set to 1. + +SPI Controller specific data in SPI slave nodes: + +- The spi slave nodes should provide the following information which is required + by the spi controller. + + - cs-gpio: A gpio specifier that specifies the gpio line used as + the slave select line by the spi controller. The format of the gpio + specifier depends on the gpio controller. + + - samsung,spi-feedback-delay: The sampling phase shift to be applied on the + miso line (to account for any lag in the miso line). The following are the + valid values. + + - 0: No phase shift. + - 1: 90 degree phase shift sampling. + - 2: 180 degree phase shift sampling. + - 3: 270 degree phase shift sampling. + +Aliases: + +- All the SPI controller nodes should be represented in the aliases node using + the following format 'spi{n}' where n is a unique number for the alias. + + +Example: + +- SoC Specific Portion: + + spi_0: spi@12d20000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d20000 0x100>; + interrupts = <0 66 0>; + tx-dma-channel = <&pdma0 5>; + rx-dma-channel = <&pdma0 4>; + }; + +- Board Specific Portion: + + spi_0: spi@12d20000 { + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpa2 4 2 3 0>, + <&gpa2 6 2 3 0>, + <&gpa2 7 2 3 0>; + + w25q80bw@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25x80"; + reg = <0>; + spi-max-frequency = <10000>; + + controller-data { + cs-gpio = <&gpa2 5 1 0 3>; + samsung,spi-feedback-delay = <0>; + }; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0xc0000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt new file mode 100644 index 0000000000000000000000000000000000000000..2ee903fad25c803f0df13a27e0d3afc89f4f50db --- /dev/null +++ b/Documentation/devicetree/bindings/tty/serial/fsl-mxs-auart.txt @@ -0,0 +1,27 @@ +* Freescale MXS Application UART (AUART) + +Required properties: +- compatible : Should be "fsl,-auart". The supported SoCs include + imx23 and imx28. +- reg : Address and length of the register set for the device +- interrupts : Should contain the auart interrupt numbers + +Example: +auart0: serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; + reg = <0x8006a000 0x2000>; + interrupts = <112 70 71>; +}; + +Note: Each auart port should have an alias correctly numbered in "aliases" +node. + +Example: + +aliases { + serial0 = &auart0; + serial1 = &auart1; + serial2 = &auart2; + serial3 = &auart3; + serial4 = &auart4; +}; diff --git a/Documentation/devicetree/bindings/usb/tegra-usb.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt similarity index 100% rename from Documentation/devicetree/bindings/usb/tegra-usb.txt rename to Documentation/devicetree/bindings/usb/nvidia,tegra20-ehci.txt diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 6eab91747a86a03c45c60d9bdca74fb28215b3a3..db4d3af3643c407ffad6e4ead2dd81d8c4ab36cf 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -3,6 +3,7 @@ Device tree binding vendor prefix registry. Keep list in alphabetical order. This isn't an exhaustive list, but you should add new prefixes to it before using them to avoid name-space collisions. +ad Avionic Design GmbH adi Analog Devices, Inc. amcc Applied Micro Circuits Corporation (APM, formally AMCC) apm Applied Micro Circuits Corporation (APM) diff --git a/Documentation/devicetree/bindings/watchdog/omap-wdt.txt b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt new file mode 100644 index 0000000000000000000000000000000000000000..c227970671ea3fafba27935405475f2376bf78fd --- /dev/null +++ b/Documentation/devicetree/bindings/watchdog/omap-wdt.txt @@ -0,0 +1,14 @@ +TI Watchdog Timer (WDT) Controller for OMAP + +Required properties: +compatible: +- "ti,omap3-wdt" for OMAP3 +- "ti,omap4-wdt" for OMAP4 +- ti,hwmods: Name of the hwmod associated to the WDT + +Examples: + +wdt2: wdt@4a314000 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; +}; diff --git a/Documentation/devicetree/usage-model.txt b/Documentation/devicetree/usage-model.txt index c5a80099b71c082af76629623923424b2acf0688..dca90fe22a90c5d61c3cc0251326917a143e8929 100644 --- a/Documentation/devicetree/usage-model.txt +++ b/Documentation/devicetree/usage-model.txt @@ -312,7 +312,7 @@ device tree for the NVIDIA Tegra board. }; }; -At .machine_init() time, Tegra board support code will need to look at +At .init_machine() time, Tegra board support code will need to look at this DT and decide which nodes to create platform_devices for. However, looking at the tree, it is not immediately obvious what kind of device each node represents, or even if a node represents a device diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 56000b33340bbe33f0b141934c756470d32ecbbd..61d1a89baeaf0032436a72412cd973e648673fb1 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -249,15 +249,6 @@ Who: Ravikiran Thirumalai --------------------------- -What: Code that is now under CONFIG_WIRELESS_EXT_SYSFS - (in net/core/net-sysfs.c) -When: 3.5 -Why: Over 1K .text/.data size reduction, data is available in other - ways (ioctls) -Who: Johannes Berg - ---------------------------- - What: sysfs ui for changing p4-clockmod parameters When: September 2009 Why: See commits 129f8ae9b1b5be94517da76009ea956e89104ce8 and @@ -414,21 +405,6 @@ Who: Jean Delvare ---------------------------- -What: xt_connlimit rev 0 -When: 2012 -Who: Jan Engelhardt -Files: net/netfilter/xt_connlimit.c - ----------------------------- - -What: ipt_addrtype match include file -When: 2012 -Why: superseded by xt_addrtype -Who: Florian Westphal -Files: include/linux/netfilter_ipv4/ipt_addrtype.h - ----------------------------- - What: i2c_driver.attach_adapter i2c_driver.detach_adapter When: September 2011 @@ -449,6 +425,19 @@ Who: Hans Verkuil ---------------------------- +What: CONFIG_CFG80211_WEXT +When: as soon as distributions ship new wireless tools, ie. wpa_supplicant 1.0 + and NetworkManager/connman/etc. that are able to use nl80211 +Why: Wireless extensions are deprecated, and userland tools are moving to + using nl80211. New drivers are no longer using wireless extensions, + and while there might still be old drivers, both new drivers and new + userland no longer needs them and they can't be used for an feature + developed in the past couple of years. As such, compatibility with + wireless extensions in new drivers will be removed. +Who: Johannes Berg + +---------------------------- + What: g_file_storage driver When: 3.8 Why: This driver has been superseded by g_mass_storage. @@ -589,6 +578,13 @@ Why: Remount currently allows changing bound subsystems and ---------------------------- +What: xt_recent rev 0 +When: 2013 +Who: Pablo Neira Ayuso +Files: net/netfilter/xt_recent.c + +---------------------------- + What: KVM debugfs statistics When: 2013 Why: KVM tracepoints provide mostly equivalent information in a much more diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index 8e2da1e06e3b2371eb82ef07105e63ad97d224b6..e0cce2a5f820a6327f9ea1558717434c490e8aae 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -9,7 +9,7 @@ be able to use diff(1). --------------------------- dentry_operations -------------------------- prototypes: - int (*d_revalidate)(struct dentry *, struct nameidata *); + int (*d_revalidate)(struct dentry *, unsigned int); int (*d_hash)(const struct dentry *, const struct inode *, struct qstr *); int (*d_compare)(const struct dentry *, const struct inode *, @@ -37,9 +37,8 @@ d_manage: no no yes (ref-walk) maybe --------------------------- inode_operations --------------------------- prototypes: - int (*create) (struct inode *,struct dentry *,umode_t, struct nameidata *); - struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameid -ata *); + int (*create) (struct inode *,struct dentry *,umode_t, bool); + struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int); int (*link) (struct dentry *,struct inode *,struct dentry *); int (*unlink) (struct inode *,struct dentry *); int (*symlink) (struct inode *,struct dentry *,const char *); @@ -62,6 +61,9 @@ ata *); int (*removexattr) (struct dentry *, const char *); int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len); void (*update_time)(struct inode *, struct timespec *, int); + int (*atomic_open)(struct inode *, struct dentry *, + struct file *, unsigned open_flag, + umode_t create_mode, int *opened); locking rules: all may block @@ -89,6 +91,7 @@ listxattr: no removexattr: yes fiemap: no update_time: no +atomic_open: yes Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on victim. diff --git a/Documentation/filesystems/porting b/Documentation/filesystems/porting index 8c91d1057d9a141f77c0c64614eb17024d45256f..2bef2b3843d1d4e09ead99fed121de4b2ab92db2 100644 --- a/Documentation/filesystems/porting +++ b/Documentation/filesystems/porting @@ -355,12 +355,10 @@ protects *all* the dcache state of a given dentry. via rcu-walk path walk (basically, if the file can have had a path name in the vfs namespace). - i_dentry and i_rcu share storage in a union, and the vfs expects -i_dentry to be reinitialized before it is freed, so an: - - INIT_LIST_HEAD(&inode->i_dentry); - -must be done in the RCU callback. + Even though i_dentry and i_rcu share storage in a union, we will +initialize the former in inode_init_always(), so just leave it alone in +the callback. It used to be necessary to clean it there, but not anymore +(starting at 3.2). -- [recommended] @@ -433,3 +431,14 @@ release it yourself. d_alloc_root() is gone, along with a lot of bugs caused by code misusing it. Replacement: d_make_root(inode). The difference is, d_make_root() drops the reference to inode if dentry allocation fails. + +-- +[mandatory] + The witch is dead! Well, 2/3 of it, anyway. ->d_revalidate() and +->lookup() do *not* take struct nameidata anymore; just the flags. +-- +[mandatory] + ->create() doesn't take struct nameidata *; unlike the previous +two, it gets "is it an O_EXCL or equivalent?" boolean argument. Note that +local filesystems can ignore tha argument - they are guaranteed that the +object doesn't exist. It's remote/distributed ones that might care... diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index efd23f4817044ac9d55932bd9476d309a02918dc..aa754e01464e1c71f55869da9d5222ef763518d7 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -341,8 +341,8 @@ This describes how the VFS can manipulate an inode in your filesystem. As of kernel 2.6.22, the following members are defined: struct inode_operations { - int (*create) (struct inode *,struct dentry *, umode_t, struct nameidata *); - struct dentry * (*lookup) (struct inode *,struct dentry *, struct nameidata *); + int (*create) (struct inode *,struct dentry *, umode_t, bool); + struct dentry * (*lookup) (struct inode *,struct dentry *, unsigned int); int (*link) (struct dentry *,struct inode *,struct dentry *); int (*unlink) (struct inode *,struct dentry *); int (*symlink) (struct inode *,struct dentry *,const char *); @@ -364,6 +364,9 @@ struct inode_operations { ssize_t (*listxattr) (struct dentry *, char *, size_t); int (*removexattr) (struct dentry *, const char *); void (*update_time)(struct inode *, struct timespec *, int); + int (*atomic_open)(struct inode *, struct dentry *, + struct file *, unsigned open_flag, + umode_t create_mode, int *opened); }; Again, all methods are called without any locks being held, unless @@ -476,6 +479,14 @@ otherwise noted. an inode. If this is not defined the VFS will update the inode itself and call mark_inode_dirty_sync. + atomic_open: called on the last component of an open. Using this optional + method the filesystem can look up, possibly create and open the file in + one atomic operation. If it cannot perform this (e.g. the file type + turned out to be wrong) it may signal this by returning 1 instead of + usual 0 or -ve . This method is only called if the last + component is negative or needs lookup. Cached positive dentries are + still handled by f_op->open(). + The Address Space Object ======================== @@ -891,7 +902,7 @@ the VFS uses a default. As of kernel 2.6.22, the following members are defined: struct dentry_operations { - int (*d_revalidate)(struct dentry *, struct nameidata *); + int (*d_revalidate)(struct dentry *, unsigned int); int (*d_hash)(const struct dentry *, const struct inode *, struct qstr *); int (*d_compare)(const struct dentry *, const struct inode *, @@ -910,11 +921,11 @@ struct dentry_operations { dcache. Most filesystems leave this as NULL, because all their dentries in the dcache are valid - d_revalidate may be called in rcu-walk mode (nd->flags & LOOKUP_RCU). + d_revalidate may be called in rcu-walk mode (flags & LOOKUP_RCU). If in rcu-walk mode, the filesystem must revalidate the dentry without blocking or storing to the dentry, d_parent and d_inode should not be - used without care (because they can go NULL), instead nd->inode should - be used. + used without care (because they can change and, in d_inode case, even + become NULL under us). If a situation is encountered that rcu-walk cannot handle, return -ECHILD and it will be called again in ref-walk mode. diff --git a/Documentation/hid/uhid.txt b/Documentation/hid/uhid.txt new file mode 100644 index 0000000000000000000000000000000000000000..4627c4241ece699cedbe6660c7754e12933c4c2c --- /dev/null +++ b/Documentation/hid/uhid.txt @@ -0,0 +1,169 @@ + UHID - User-space I/O driver support for HID subsystem + ======================================================== + +The HID subsystem needs two kinds of drivers. In this document we call them: + + 1. The "HID I/O Driver" is the driver that performs raw data I/O to the + low-level device. Internally, they register an hid_ll_driver structure with + the HID core. They perform device setup, read raw data from the device and + push it into the HID subsystem and they provide a callback so the HID + subsystem can send data to the device. + + 2. The "HID Device Driver" is the driver that parses HID reports and reacts on + them. There are generic drivers like "generic-usb" and "generic-bluetooth" + which adhere to the HID specification and provide the standardizes features. + But there may be special drivers and quirks for each non-standard device out + there. Internally, they use the hid_driver structure. + +Historically, the USB stack was the first subsystem to provide an HID I/O +Driver. However, other standards like Bluetooth have adopted the HID specs and +may provide HID I/O Drivers, too. The UHID driver allows to implement HID I/O +Drivers in user-space and feed the data into the kernel HID-subsystem. + +This allows user-space to operate on the same level as USB-HID, Bluetooth-HID +and similar. It does not provide a way to write HID Device Drivers, though. Use +hidraw for this purpose. + +There is an example user-space application in ./samples/uhid/uhid-example.c + +The UHID API +------------ + +UHID is accessed through a character misc-device. The minor-number is allocated +dynamically so you need to rely on udev (or similar) to create the device node. +This is /dev/uhid by default. + +If a new device is detected by your HID I/O Driver and you want to register this +device with the HID subsystem, then you need to open /dev/uhid once for each +device you want to register. All further communication is done by read()'ing or +write()'ing "struct uhid_event" objects. Non-blocking operations are supported +by setting O_NONBLOCK. + +struct uhid_event { + __u32 type; + union { + struct uhid_create_req create; + struct uhid_data_req data; + ... + } u; +}; + +The "type" field contains the ID of the event. Depending on the ID different +payloads are sent. You must not split a single event across multiple read()'s or +multiple write()'s. A single event must always be sent as a whole. Furthermore, +only a single event can be sent per read() or write(). Pending data is ignored. +If you want to handle multiple events in a single syscall, then use vectored +I/O with readv()/writev(). + +The first thing you should do is sending an UHID_CREATE event. This will +register the device. UHID will respond with an UHID_START event. You can now +start sending data to and reading data from UHID. However, unless UHID sends the +UHID_OPEN event, the internally attached HID Device Driver has no user attached. +That is, you might put your device asleep unless you receive the UHID_OPEN +event. If you receive the UHID_OPEN event, you should start I/O. If the last +user closes the HID device, you will receive an UHID_CLOSE event. This may be +followed by an UHID_OPEN event again and so on. There is no need to perform +reference-counting in user-space. That is, you will never receive multiple +UHID_OPEN events without an UHID_CLOSE event. The HID subsystem performs +ref-counting for you. +You may decide to ignore UHID_OPEN/UHID_CLOSE, though. I/O is allowed even +though the device may have no users. + +If you want to send data to the HID subsystem, you send an HID_INPUT event with +your raw data payload. If the kernel wants to send data to the device, you will +read an UHID_OUTPUT or UHID_OUTPUT_EV event. + +If your device disconnects, you should send an UHID_DESTROY event. This will +unregister the device. You can now send UHID_CREATE again to register a new +device. +If you close() the fd, the device is automatically unregistered and destroyed +internally. + +write() +------- +write() allows you to modify the state of the device and feed input data into +the kernel. The following types are supported: UHID_CREATE, UHID_DESTROY and +UHID_INPUT. The kernel will parse the event immediately and if the event ID is +not supported, it will return -EOPNOTSUPP. If the payload is invalid, then +-EINVAL is returned, otherwise, the amount of data that was read is returned and +the request was handled successfully. + + UHID_CREATE: + This creates the internal HID device. No I/O is possible until you send this + event to the kernel. The payload is of type struct uhid_create_req and + contains information about your device. You can start I/O now. + + UHID_DESTROY: + This destroys the internal HID device. No further I/O will be accepted. There + may still be pending messages that you can receive with read() but no further + UHID_INPUT events can be sent to the kernel. + You can create a new device by sending UHID_CREATE again. There is no need to + reopen the character device. + + UHID_INPUT: + You must send UHID_CREATE before sending input to the kernel! This event + contains a data-payload. This is the raw data that you read from your device. + The kernel will parse the HID reports and react on it. + + UHID_FEATURE_ANSWER: + If you receive a UHID_FEATURE request you must answer with this request. You + must copy the "id" field from the request into the answer. Set the "err" field + to 0 if no error occured or to EIO if an I/O error occurred. + If "err" is 0 then you should fill the buffer of the answer with the results + of the feature request and set "size" correspondingly. + +read() +------ +read() will return a queued ouput report. These output reports can be of type +UHID_START, UHID_STOP, UHID_OPEN, UHID_CLOSE, UHID_OUTPUT or UHID_OUTPUT_EV. No +reaction is required to any of them but you should handle them according to your +needs. Only UHID_OUTPUT and UHID_OUTPUT_EV have payloads. + + UHID_START: + This is sent when the HID device is started. Consider this as an answer to + UHID_CREATE. This is always the first event that is sent. + + UHID_STOP: + This is sent when the HID device is stopped. Consider this as an answer to + UHID_DESTROY. + If the kernel HID device driver closes the device manually (that is, you + didn't send UHID_DESTROY) then you should consider this device closed and send + an UHID_DESTROY event. You may want to reregister your device, though. This is + always the last message that is sent to you unless you reopen the device with + UHID_CREATE. + + UHID_OPEN: + This is sent when the HID device is opened. That is, the data that the HID + device provides is read by some other process. You may ignore this event but + it is useful for power-management. As long as you haven't received this event + there is actually no other process that reads your data so there is no need to + send UHID_INPUT events to the kernel. + + UHID_CLOSE: + This is sent when there are no more processes which read the HID data. It is + the counterpart of UHID_OPEN and you may as well ignore this event. + + UHID_OUTPUT: + This is sent if the HID device driver wants to send raw data to the I/O + device. You should read the payload and forward it to the device. The payload + is of type "struct uhid_data_req". + This may be received even though you haven't received UHID_OPEN, yet. + + UHID_OUTPUT_EV: + Same as UHID_OUTPUT but this contains a "struct input_event" as payload. This + is called for force-feedback, LED or similar events which are received through + an input device by the HID subsystem. You should convert this into raw reports + and send them to your device similar to events of type UHID_OUTPUT. + + UHID_FEATURE: + This event is sent if the kernel driver wants to perform a feature request as + described in the HID specs. The report-type and report-number are available in + the payload. + The kernel serializes feature requests so there will never be two in parallel. + However, if you fail to respond with a UHID_FEATURE_ANSWER in a time-span of 5 + seconds, then the requests will be dropped and a new one might be sent. + Therefore, the payload also contains an "id" field that identifies every + request. + +Document by: + David Herrmann diff --git a/Documentation/hwmon/da9052 b/Documentation/hwmon/da9052 new file mode 100644 index 0000000000000000000000000000000000000000..ef898553638ef960840202892a0060343c57981a --- /dev/null +++ b/Documentation/hwmon/da9052 @@ -0,0 +1,61 @@ +Supported chips: + * Dialog Semiconductors DA9052-BC and DA9053-AA/Bx PMICs + Prefix: 'da9052' + Datasheet: Datasheet is not publicly available. + +Authors: David Dajun Chen + +Description +----------- + +The DA9052/53 provides an Analogue to Digital Converter (ADC) with 10 bits +resolution and track and hold circuitry combined with an analogue input +multiplexer. The analogue input multiplexer will allow conversion of up to 10 +different inputs. The track and hold circuit ensures stable input voltages at +the input of the ADC during the conversion. + +The ADC is used to measure the following inputs: +Channel 0: VDDOUT - measurement of the system voltage +Channel 1: ICH - internal battery charger current measurement +Channel 2: TBAT - output from the battery NTC +Channel 3: VBAT - measurement of the battery voltage +Channel 4: ADC_IN4 - high impedance input (0 - 2.5V) +Channel 5: ADC_IN5 - high impedance input (0 - 2.5V) +Channel 6: ADC_IN6 - high impedance input (0 - 2.5V) +Channel 7: XY - TSI interface to measure the X and Y voltage of the touch + screen resistive potentiometers +Channel 8: Internal Tjunc. - sense (internal temp. sensor) +Channel 9: VBBAT - measurement of the backup battery voltage + +By using sysfs attributes we can measure the system voltage VDDOUT, the battery +charging current ICH, battery temperature TBAT, battery junction temperature +TJUNC, battery voltage VBAT and the back up battery voltage VBBAT. + +Voltage Monitoring +------------------ + +Voltages are sampled by a 10 bit ADC. + +The battery voltage is calculated as: + Milli volt = ((ADC value * 1000) / 512) + 2500 + +The backup battery voltage is calculated as: + Milli volt = (ADC value * 2500) / 512; + +The voltages on ADC channels 4, 5 and 6 are calculated as: + Milli volt = (ADC value * 2500) / 1023 + +Temperature Monitoring +---------------------- + +Temperatures are sampled by a 10 bit ADC. Junction and battery temperatures +are monitored by the ADC channels. + +The junction temperature is calculated: + Degrees celsius = 1.708 * (TJUNC_RES - T_OFFSET) - 108.8 +The junction temperature attribute is supported by the driver. + +The battery temperature is calculated: + Degree Celcius = 1 / (t1 + 1/298)- 273 +where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255)) +Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively. diff --git a/Documentation/hwmon/hih6130 b/Documentation/hwmon/hih6130 new file mode 100644 index 0000000000000000000000000000000000000000..73dae918ea7b9804771d258c56f96102b55ff8e3 --- /dev/null +++ b/Documentation/hwmon/hih6130 @@ -0,0 +1,37 @@ +Kernel driver hih6130 +===================== + +Supported chips: + * Honeywell HIH-6130 / HIH-6131 + Prefix: 'hih6130' + Addresses scanned: none + Datasheet: Publicly available at the Honeywell website + http://sensing.honeywell.com/index.php?ci_id=3106&la_id=1&defId=44872 + +Author: + Iain Paton + +Description +----------- + +The HIH-6130 & HIH-6131 are humidity and temperature sensors in a SO8 package. +The difference between the two devices is that the HIH-6131 has a condensation +filter. + +The devices communicate with the I2C protocol. All sensors are set to the same +I2C address 0x27 by default, so an entry with I2C_BOARD_INFO("hih6130", 0x27) +can be used in the board setup code. + +Please see Documentation/i2c/instantiating-devices for details on how to +instantiate I2C devices. + +sysfs-Interface +--------------- + +temp1_input - temperature input +humidity1_input - humidity input + +Notes +----- + +Command mode and alarms are not currently supported. diff --git a/Documentation/hwmon/submitting-patches b/Documentation/hwmon/submitting-patches index 86f42e8e9e4993289ebb5b5d3e83ccb06f5e8bc2..790f774a303247c0693ed6c24c8d9dfd6103d2f0 100644 --- a/Documentation/hwmon/submitting-patches +++ b/Documentation/hwmon/submitting-patches @@ -70,6 +70,9 @@ increase the chances of your change being accepted. review more difficult. It may also result in code which is more complicated than necessary. Use inline functions or just regular functions instead. +* Use devres functions whenever possible to allocate resources. For rationale + and supported functions, please see Documentation/driver-model/devres.txt. + * If the driver has a detect function, make sure it is silent. Debug messages and messages printed after a successful detection are acceptable, but it must not print messages such as "Chip XXX not found/supported". diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 71f55bbcefc811e2d78b2987744405c3172314b3..615142da4ef64c6ec8ae87893425046a1564e786 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -38,9 +38,10 @@ Module Parameters Disable selected features normally supported by the device. This makes it possible to work around possible driver or hardware bugs if the feature in question doesn't work as intended for whatever reason. Bit values: - 1 disable SMBus PEC - 2 disable the block buffer - 8 disable the I2C block read functionality + 0x01 disable SMBus PEC + 0x02 disable the block buffer + 0x08 disable the I2C block read functionality + 0x10 don't use interrupts Description @@ -86,6 +87,12 @@ SMBus 2.0 Support The 82801DB (ICH4) and later chips support several SMBus 2.0 features. +Interrupt Support +----------------- + +PCI interrupt support is supported on the 82801EB (ICH5) and later chips. + + Hidden ICH SMBus ---------------- diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4 index 475bb4ae0720545f8501ce574ddb3a3e01876b23..1e6634f54c5019b45b6d663b6fd7cd7db9b23530 100644 --- a/Documentation/i2c/busses/i2c-piix4 +++ b/Documentation/i2c/busses/i2c-piix4 @@ -8,6 +8,11 @@ Supported adapters: Datasheet: Only available via NDA from ServerWorks * ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges Datasheet: Not publicly available + SB700 register reference available at: + http://support.amd.com/us/Embedded_TechDocs/43009_sb7xx_rrg_pub_1.00.pdf + * AMD SP5100 (SB700 derivative found on some server mainboards) + Datasheet: Publicly available at the AMD website + http://support.amd.com/us/Embedded_TechDocs/44413.pdf * AMD Hudson-2 Datasheet: Not publicly available * Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge @@ -68,6 +73,10 @@ this driver on those mainboards. The ServerWorks Southbridges, the Intel 440MX, and the Victory66 are identical to the PIIX4 in I2C/SMBus support. +The AMD SB700 and SP5100 chipsets implement two PIIX4-compatible SMBus +controllers. If your BIOS initializes the secondary controller, it will +be detected by this driver as an "Auxiliary SMBus Host Controller". + If you own Force CPCI735 motherboard or other OSB4 based systems you may need to change the SMBus Interrupt Select register so the SMBus controller uses the SMI mode. diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index 5aa53374ea2a84d264f7875d69d39fd1b0526916..3a94b0e6f6010d34279ea82a65b3c622e0b230d3 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -245,21 +245,17 @@ static int __init foo_init(void) { return i2c_add_driver(&foo_driver); } +module_init(foo_init); static void __exit foo_cleanup(void) { i2c_del_driver(&foo_driver); } +module_exit(foo_cleanup); -/* Substitute your own name and email address */ -MODULE_AUTHOR("Frodo Looijaard " -MODULE_DESCRIPTION("Driver for Barf Inc. Foo I2C devices"); - -/* a few non-GPL license types are also allowed */ -MODULE_LICENSE("GPL"); +The module_i2c_driver() macro can be used to reduce above code. -module_init(foo_init); -module_exit(foo_cleanup); +module_i2c_driver(foo_driver); Note that some functions are marked by `__init'. These functions can be removed after kernel booting (or module loading) is completed. @@ -267,6 +263,17 @@ Likewise, functions marked by `__exit' are dropped by the compiler when the code is built into the kernel, as they would never be called. +Driver Information +================== + +/* Substitute your own name and email address */ +MODULE_AUTHOR("Frodo Looijaard " +MODULE_DESCRIPTION("Driver for Barf Inc. Foo I2C devices"); + +/* a few non-GPL license types are also allowed */ +MODULE_LICENSE("GPL"); + + Power Management ================ diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt index 506c7390c2b90e37b0df7f1b8e93dc7ff2b540fd..13f1aa09b938c09c91421ad55dc168ef67cd8347 100644 --- a/Documentation/kdump/kdump.txt +++ b/Documentation/kdump/kdump.txt @@ -86,7 +86,7 @@ There is also a gitweb interface available at http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git More information about kexec-tools can be found at -http://www.kernel.org/pub/linux/utils/kernel/kexec/README.html +http://horms.net/projects/kexec/ 3) Unpack the tarball with the tar command, as follows: diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index a92c5ebf373e2bf4bea68072b58fbc0471ad9c13..c2619ef44a720d14bf23d9c842692b92d7b7a9ba 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1134,7 +1134,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. forcesac soft pt [x86, IA-64] - group_mf [x86, IA-64] io7= [HW] IO7 for Marvel based alpha systems @@ -2367,6 +2366,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Set maximum number of finished RCU callbacks to process in one batch. + rcutree.fanout_leaf= [KNL,BOOT] + Increase the number of CPUs assigned to each + leaf rcu_node structure. Useful for very large + systems. + rcutree.qhimark= [KNL,BOOT] Set threshold of queued RCU callbacks over which batch limiting is disabled. @@ -2932,6 +2936,8 @@ bytes respectively. Such letter suffixes can also be entirely omitted. initial READ(10) command); o = CAPACITY_OK (accept the capacity reported by the device); + p = WRITE_CACHE (the device cache is ON + by default); r = IGNORE_RESIDUE (the device reports bogus residue values); s = SINGLE_LUN (the device has only one diff --git a/Documentation/laptops/asus-laptop.txt b/Documentation/laptops/asus-laptop.txt index a1e04d679289beaca490b272b75c68e3a687a261..69f9fb3701e07804961f931ef76ea5716b4f8312 100644 --- a/Documentation/laptops/asus-laptop.txt +++ b/Documentation/laptops/asus-laptop.txt @@ -151,8 +151,7 @@ Display switching Debugging: 1) Check whether the Fn+F8 key: - a) does not lock the laptop (try disabling CONFIG_X86_UP_APIC or boot with - noapic / nolapic if it does) + a) does not lock the laptop (try a boot with noapic / nolapic if it does) b) generates events (0x6n, where n is the value corresponding to the configuration above) c) actually works diff --git a/Documentation/networking/batman-adv.txt b/Documentation/networking/batman-adv.txt index 75a592365af91fa913cb5d8dae49fb6782875e5d..8f3ae4a6147e2c114849296e37809317671db057 100644 --- a/Documentation/networking/batman-adv.txt +++ b/Documentation/networking/batman-adv.txt @@ -211,6 +211,11 @@ The debug output can be changed at runtime using the file will enable debug messages for when routes change. +Counters for different types of packets entering and leaving the +batman-adv module are available through ethtool: + +# ethtool --statistics bat0 + BATCTL ------ diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index bfea8a338901900c78f82ae244603d8aa9069075..6b1c7110534e31bb2e04acd1505a07f6dd4db481 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -1210,7 +1210,7 @@ options, you may wish to use the "max_bonds" module parameter, documented above. To create multiple bonding devices with differing options, it is -preferrable to use bonding parameters exported by sysfs, documented in the +preferable to use bonding parameters exported by sysfs, documented in the section below. For versions of bonding without sysfs support, the only means to @@ -1950,7 +1950,7 @@ access to fail over to. Additionally, the bonding load balance modes support link monitoring of their members, so if individual links fail, the load will be rebalanced across the remaining devices. - See Section 13, "Configuring Bonding for Maximum Throughput" + See Section 12, "Configuring Bonding for Maximum Throughput" for information on configuring bonding with one peer device. 11.2 High Availability in a Multiple Switch Topology @@ -2620,7 +2620,7 @@ be found at: https://lists.sourceforge.net/lists/listinfo/bonding-devel - Discussions regarding the developpement of the bonding driver take place + Discussions regarding the development of the bonding driver take place on the main Linux network mailing list, hosted at vger.kernel.org. The list address is: diff --git a/Documentation/networking/bridge.txt b/Documentation/networking/bridge.txt index a7ba5e4e2c917309918ac458142a327341178756..a27cb6214ed71358622360848a6bd6095faa5e49 100644 --- a/Documentation/networking/bridge.txt +++ b/Documentation/networking/bridge.txt @@ -1,7 +1,14 @@ In order to use the Ethernet bridging functionality, you'll need the -userspace tools. These programs and documentation are available -at http://www.linuxfoundation.org/en/Net:Bridge. The download page is -http://prdownloads.sourceforge.net/bridge. +userspace tools. + +Documentation for Linux bridging is on: + http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge + +The bridge-utilities are maintained at: + git://git.kernel.org/pub/scm/linux/kernel/git/shemminger/bridge-utils.git + +Additionally, the iproute2 utilities can be used to configure +bridge devices. If you still have questions, don't hesitate to post to the mailing list (more info https://lists.linux-foundation.org/mailman/listinfo/bridge). diff --git a/Documentation/networking/caif/Linux-CAIF.txt b/Documentation/networking/caif/Linux-CAIF.txt index e52fd62bef3a06cff2c9332313c34a3bf3a310f8..0aa4bd381becd823f17e7fd1fa75d429efafca90 100644 --- a/Documentation/networking/caif/Linux-CAIF.txt +++ b/Documentation/networking/caif/Linux-CAIF.txt @@ -19,60 +19,36 @@ and host. Currently, UART and Loopback are available for Linux. Architecture: ------------ The implementation of CAIF is divided into: -* CAIF Socket Layer, Kernel API, and Net Device. +* CAIF Socket Layer and GPRS IP Interface. * CAIF Core Protocol Implementation * CAIF Link Layer, implemented as NET devices. RTNL ! - ! +------+ +------+ +------+ - ! +------+! +------+! +------+! - ! ! Sock !! !Kernel!! ! Net !! - ! ! API !+ ! API !+ ! Dev !+ <- CAIF Client APIs - ! +------+ +------! +------+ - ! ! ! ! - ! +----------!----------+ - ! +------+ <- CAIF Protocol Implementation - +-------> ! CAIF ! - ! Core ! - +------+ - +--------!--------+ - ! ! - +------+ +-----+ - ! ! ! TTY ! <- Link Layer (Net Devices) - +------+ +-----+ - - -Using the Kernel API ----------------------- -The Kernel API is used for accessing CAIF channels from the -kernel. -The user of the API has to implement two callbacks for receive -and control. -The receive callback gives a CAIF packet as a SKB. The control -callback will -notify of channel initialization complete, and flow-on/flow- -off. - - - struct caif_device caif_dev = { - .caif_config = { - .name = "MYDEV" - .type = CAIF_CHTY_AT - } - .receive_cb = my_receive, - .control_cb = my_control, - }; - caif_add_device(&caif_dev); - caif_transmit(&caif_dev, skb); - -See the caif_kernel.h for details about the CAIF kernel API. + ! +------+ +------+ + ! +------+! +------+! + ! ! IP !! !Socket!! + +-------> !interf!+ ! API !+ <- CAIF Client APIs + ! +------+ +------! + ! ! ! + ! +-----------+ + ! ! + ! +------+ <- CAIF Core Protocol + ! ! CAIF ! + ! ! Core ! + ! +------+ + ! +----------!---------+ + ! ! ! ! + ! +------+ +-----+ +------+ + +--> ! HSI ! ! TTY ! ! USB ! <- Link Layer (Net Devices) + +------+ +-----+ +------+ + I M P L E M E N T A T I O N =========================== -=========================== + CAIF Core Protocol Layer ========================================= @@ -88,17 +64,13 @@ The Core CAIF implementation contains: - Simple implementation of CAIF. - Layered architecture (a la Streams), each layer in the CAIF specification is implemented in a separate c-file. - - Clients must implement PHY layer to access physical HW - with receive and transmit functions. - Clients must call configuration function to add PHY layer. - Clients must implement CAIF layer to consume/produce CAIF payload with receive and transmit functions. - Clients must call configuration function to add and connect the Client layer. - When receiving / transmitting CAIF Packets (cfpkt), ownership is passed - to the called function (except for framing layers' receive functions - or if a transmit function returns an error, in which case the caller - must free the packet). + to the called function (except for framing layers' receive function) Layered Architecture -------------------- @@ -109,11 +81,6 @@ Implementation. The support functions include: CAIF Packet has functions for creating, destroying and adding content and for adding/extracting header and trailers to protocol packets. - - CFLST CAIF list implementation. - - - CFGLUE CAIF Glue. Contains OS Specifics, such as memory - allocation, endianness, etc. - The CAIF Protocol implementation contains: - CFCNFG CAIF Configuration layer. Configures the CAIF Protocol @@ -128,7 +95,7 @@ The CAIF Protocol implementation contains: control and remote shutdown requests. - CFVEI CAIF VEI layer. Handles CAIF AT Channels on VEI (Virtual - External Interface). This layer encodes/decodes VEI frames. + External Interface). This layer encodes/decodes VEI frames. - CFDGML CAIF Datagram layer. Handles CAIF Datagram layer (IP traffic), encodes/decodes Datagram frames. @@ -170,7 +137,7 @@ The CAIF Protocol implementation contains: +---------+ +---------+ ! ! +---------+ +---------+ - | | | Serial | + | | | Serial | | | | CFSERL | +---------+ +---------+ @@ -186,24 +153,20 @@ In this layered approach the following "rules" apply. layer->dn->transmit(layer->dn, packet); -Linux Driver Implementation +CAIF Socket and IP interface =========================== -Linux GPRS Net Device and CAIF socket are implemented on top of the -CAIF Core protocol. The Net device and CAIF socket have an instance of +The IP interface and CAIF socket API are implemented on top of the +CAIF Core protocol. The IP Interface and CAIF socket have an instance of 'struct cflayer', just like the CAIF Core protocol stack. Net device and Socket implement the 'receive()' function defined by 'struct cflayer', just like the rest of the CAIF stack. In this way, transmit and receive of packets is handled as by the rest of the layers: the 'dn->transmit()' function is called in order to transmit data. -The layer on top of the CAIF Core implementation is -sometimes referred to as the "Client layer". - - Configuration of Link Layer --------------------------- -The Link Layer is implemented as Linux net devices (struct net_device). +The Link Layer is implemented as Linux network devices (struct net_device). Payload handling and registration is done using standard Linux mechanisms. The CAIF Protocol relies on a loss-less link layer without implementing diff --git a/Documentation/networking/can.txt b/Documentation/networking/can.txt index ac295399f0d4e99d9042d32c3a0a8ebf137c72cc..820f55344edc0a035358fa643bbe79c48d4d887f 100644 --- a/Documentation/networking/can.txt +++ b/Documentation/networking/can.txt @@ -22,7 +22,8 @@ This file contains 4.1.2 RAW socket option CAN_RAW_ERR_FILTER 4.1.3 RAW socket option CAN_RAW_LOOPBACK 4.1.4 RAW socket option CAN_RAW_RECV_OWN_MSGS - 4.1.5 RAW socket returned message flags + 4.1.5 RAW socket option CAN_RAW_FD_FRAMES + 4.1.6 RAW socket returned message flags 4.2 Broadcast Manager protocol sockets (SOCK_DGRAM) 4.3 connected transport protocols (SOCK_SEQPACKET) 4.4 unconnected transport protocols (SOCK_DGRAM) @@ -41,7 +42,8 @@ This file contains 6.5.1 Netlink interface to set/get devices properties 6.5.2 Setting the CAN bit-timing 6.5.3 Starting and stopping the CAN network device - 6.6 supported CAN hardware + 6.6 CAN FD (flexible data rate) driver support + 6.7 supported CAN hardware 7 Socket CAN resources @@ -232,16 +234,16 @@ solution for a couple of reasons: arbitration problems and error frames caused by the different ECUs. The occurrence of detected errors are important for diagnosis and have to be logged together with the exact timestamp. For this - reason the CAN interface driver can generate so called Error Frames - that can optionally be passed to the user application in the same - way as other CAN frames. Whenever an error on the physical layer + reason the CAN interface driver can generate so called Error Message + Frames that can optionally be passed to the user application in the + same way as other CAN frames. Whenever an error on the physical layer or the MAC layer is detected (e.g. by the CAN controller) the driver - creates an appropriate error frame. Error frames can be requested by - the user application using the common CAN filter mechanisms. Inside - this filter definition the (interested) type of errors may be - selected. The reception of error frames is disabled by default. - The format of the CAN error frame is briefly described in the Linux - header file "include/linux/can/error.h". + creates an appropriate error message frame. Error messages frames can + be requested by the user application using the common CAN filter + mechanisms. Inside this filter definition the (interested) type of + errors may be selected. The reception of error messages is disabled + by default. The format of the CAN error message frame is briefly + described in the Linux header file "include/linux/can/error.h". 4. How to use Socket CAN ------------------------ @@ -273,7 +275,7 @@ solution for a couple of reasons: struct can_frame { canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ - __u8 can_dlc; /* data length code: 0 .. 8 */ + __u8 can_dlc; /* frame payload length in byte (0 .. 8) */ __u8 data[8] __attribute__((aligned(8))); }; @@ -375,6 +377,51 @@ solution for a couple of reasons: nbytes = sendto(s, &frame, sizeof(struct can_frame), 0, (struct sockaddr*)&addr, sizeof(addr)); + Remark about CAN FD (flexible data rate) support: + + Generally the handling of CAN FD is very similar to the formerly described + examples. The new CAN FD capable CAN controllers support two different + bitrates for the arbitration phase and the payload phase of the CAN FD frame + and up to 64 bytes of payload. This extended payload length breaks all the + kernel interfaces (ABI) which heavily rely on the CAN frame with fixed eight + bytes of payload (struct can_frame) like the CAN_RAW socket. Therefore e.g. + the CAN_RAW socket supports a new socket option CAN_RAW_FD_FRAMES that + switches the socket into a mode that allows the handling of CAN FD frames + and (legacy) CAN frames simultaneously (see section 4.1.5). + + The struct canfd_frame is defined in include/linux/can.h: + + struct canfd_frame { + canid_t can_id; /* 32 bit CAN_ID + EFF/RTR/ERR flags */ + __u8 len; /* frame payload length in byte (0 .. 64) */ + __u8 flags; /* additional flags for CAN FD */ + __u8 __res0; /* reserved / padding */ + __u8 __res1; /* reserved / padding */ + __u8 data[64] __attribute__((aligned(8))); + }; + + The struct canfd_frame and the existing struct can_frame have the can_id, + the payload length and the payload data at the same offset inside their + structures. This allows to handle the different structures very similar. + When the content of a struct can_frame is copied into a struct canfd_frame + all structure elements can be used as-is - only the data[] becomes extended. + + When introducing the struct canfd_frame it turned out that the data length + code (DLC) of the struct can_frame was used as a length information as the + length and the DLC has a 1:1 mapping in the range of 0 .. 8. To preserve + the easy handling of the length information the canfd_frame.len element + contains a plain length value from 0 .. 64. So both canfd_frame.len and + can_frame.can_dlc are equal and contain a length information and no DLC. + For details about the distinction of CAN and CAN FD capable devices and + the mapping to the bus-relevant data length code (DLC), see chapter 6.6. + + The length of the two CAN(FD) frame structures define the maximum transfer + unit (MTU) of the CAN(FD) network interface and skbuff data length. Two + definitions are specified for CAN specific MTUs in include/linux/can.h : + + #define CAN_MTU (sizeof(struct can_frame)) == 16 => 'legacy' CAN frame + #define CANFD_MTU (sizeof(struct canfd_frame)) == 72 => CAN FD frame + 4.1 RAW protocol sockets with can_filters (SOCK_RAW) Using CAN_RAW sockets is extensively comparable to the commonly @@ -383,7 +430,7 @@ solution for a couple of reasons: defaults are set at RAW socket binding time: - The filters are set to exactly one filter receiving everything - - The socket only receives valid data frames (=> no error frames) + - The socket only receives valid data frames (=> no error message frames) - The loopback of sent CAN frames is enabled (see chapter 3.2) - The socket does not receive its own sent frames (in loopback mode) @@ -434,7 +481,7 @@ solution for a couple of reasons: 4.1.2 RAW socket option CAN_RAW_ERR_FILTER As described in chapter 3.4 the CAN interface driver can generate so - called Error Frames that can optionally be passed to the user + called Error Message Frames that can optionally be passed to the user application in the same way as other CAN frames. The possible errors are divided into different error classes that may be filtered using the appropriate error mask. To register for every possible @@ -472,7 +519,69 @@ solution for a couple of reasons: setsockopt(s, SOL_CAN_RAW, CAN_RAW_RECV_OWN_MSGS, &recv_own_msgs, sizeof(recv_own_msgs)); - 4.1.5 RAW socket returned message flags + 4.1.5 RAW socket option CAN_RAW_FD_FRAMES + + CAN FD support in CAN_RAW sockets can be enabled with a new socket option + CAN_RAW_FD_FRAMES which is off by default. When the new socket option is + not supported by the CAN_RAW socket (e.g. on older kernels), switching the + CAN_RAW_FD_FRAMES option returns the error -ENOPROTOOPT. + + Once CAN_RAW_FD_FRAMES is enabled the application can send both CAN frames + and CAN FD frames. OTOH the application has to handle CAN and CAN FD frames + when reading from the socket. + + CAN_RAW_FD_FRAMES enabled: CAN_MTU and CANFD_MTU are allowed + CAN_RAW_FD_FRAMES disabled: only CAN_MTU is allowed (default) + + Example: + [ remember: CANFD_MTU == sizeof(struct canfd_frame) ] + + struct canfd_frame cfd; + + nbytes = read(s, &cfd, CANFD_MTU); + + if (nbytes == CANFD_MTU) { + printf("got CAN FD frame with length %d\n", cfd.len); + /* cfd.flags contains valid data */ + } else if (nbytes == CAN_MTU) { + printf("got legacy CAN frame with length %d\n", cfd.len); + /* cfd.flags is undefined */ + } else { + fprintf(stderr, "read: invalid CAN(FD) frame\n"); + return 1; + } + + /* the content can be handled independently from the received MTU size */ + + printf("can_id: %X data length: %d data: ", cfd.can_id, cfd.len); + for (i = 0; i < cfd.len; i++) + printf("%02X ", cfd.data[i]); + + When reading with size CANFD_MTU only returns CAN_MTU bytes that have + been received from the socket a legacy CAN frame has been read into the + provided CAN FD structure. Note that the canfd_frame.flags data field is + not specified in the struct can_frame and therefore it is only valid in + CANFD_MTU sized CAN FD frames. + + As long as the payload length is <=8 the received CAN frames from CAN FD + capable CAN devices can be received and read by legacy sockets too. When + user-generated CAN FD frames have a payload length <=8 these can be send + by legacy CAN network interfaces too. Sending CAN FD frames with payload + length > 8 to a legacy CAN network interface returns an -EMSGSIZE error. + + Implementation hint for new CAN applications: + + To build a CAN FD aware application use struct canfd_frame as basic CAN + data structure for CAN_RAW based applications. When the application is + executed on an older Linux kernel and switching the CAN_RAW_FD_FRAMES + socket option returns an error: No problem. You'll get legacy CAN frames + or CAN FD frames and can process them the same way. + + When sending to CAN devices make sure that the device is capable to handle + CAN FD frames by checking if the device maximum transfer unit is CANFD_MTU. + The CAN device MTU can be retrieved e.g. with a SIOCGIFMTU ioctl() syscall. + + 4.1.6 RAW socket returned message flags When using recvmsg() call, the msg->msg_flags may contain following flags: @@ -527,7 +636,7 @@ solution for a couple of reasons: rcvlist_all - list for unfiltered entries (no filter operations) rcvlist_eff - list for single extended frame (EFF) entries - rcvlist_err - list for error frames masks + rcvlist_err - list for error message frames masks rcvlist_fil - list for mask/value filters rcvlist_inv - list for mask/value filters (inverse semantic) rcvlist_sff - list for single standard frame (SFF) entries @@ -573,10 +682,13 @@ solution for a couple of reasons: dev->type = ARPHRD_CAN; /* the netdevice hardware type */ dev->flags = IFF_NOARP; /* CAN has no arp */ - dev->mtu = sizeof(struct can_frame); + dev->mtu = CAN_MTU; /* sizeof(struct can_frame) -> legacy CAN interface */ - The struct can_frame is the payload of each socket buffer in the - protocol family PF_CAN. + or alternative, when the controller supports CAN with flexible data rate: + dev->mtu = CANFD_MTU; /* sizeof(struct canfd_frame) -> CAN FD interface */ + + The struct can_frame or struct canfd_frame is the payload of each socket + buffer (skbuff) in the protocol family PF_CAN. 6.2 local loopback of sent frames @@ -784,15 +896,41 @@ solution for a couple of reasons: $ ip link set canX type can restart-ms 100 Alternatively, the application may realize the "bus-off" condition - by monitoring CAN error frames and do a restart when appropriate with - the command: + by monitoring CAN error message frames and do a restart when + appropriate with the command: $ ip link set canX type can restart - Note that a restart will also create a CAN error frame (see also - chapter 3.4). + Note that a restart will also create a CAN error message frame (see + also chapter 3.4). + + 6.6 CAN FD (flexible data rate) driver support + + CAN FD capable CAN controllers support two different bitrates for the + arbitration phase and the payload phase of the CAN FD frame. Therefore a + second bittiming has to be specified in order to enable the CAN FD bitrate. + + Additionally CAN FD capable CAN controllers support up to 64 bytes of + payload. The representation of this length in can_frame.can_dlc and + canfd_frame.len for userspace applications and inside the Linux network + layer is a plain value from 0 .. 64 instead of the CAN 'data length code'. + The data length code was a 1:1 mapping to the payload length in the legacy + CAN frames anyway. The payload length to the bus-relevant DLC mapping is + only performed inside the CAN drivers, preferably with the helper + functions can_dlc2len() and can_len2dlc(). + + The CAN netdevice driver capabilities can be distinguished by the network + devices maximum transfer unit (MTU): + + MTU = 16 (CAN_MTU) => sizeof(struct can_frame) => 'legacy' CAN device + MTU = 72 (CANFD_MTU) => sizeof(struct canfd_frame) => CAN FD capable device + + The CAN device MTU can be retrieved e.g. with a SIOCGIFMTU ioctl() syscall. + N.B. CAN FD capable devices can also handle and send legacy CAN frames. + + FIXME: Add details about the CAN FD controller configuration when available. - 6.6 Supported CAN hardware + 6.7 Supported CAN hardware Please check the "Kconfig" file in "drivers/net/can" to get an actual list of the support CAN hardware. On the Socket CAN project website diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 6f896b94abdc74369a28eb48f8af74bfe2c0c84a..406a5226220d2d9e985bb549a972d354c59f0181 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -468,6 +468,19 @@ tcp_syncookies - BOOLEAN SYN flood warnings in logs not being really flooded, your server is seriously misconfigured. +tcp_fastopen - INTEGER + Enable TCP Fast Open feature (draft-ietf-tcpm-fastopen) to send data + in the opening SYN packet. To use this feature, the client application + must not use connect(). Instead, it should use sendmsg() or sendto() + with MSG_FASTOPEN flag which performs a TCP handshake automatically. + + The values (bitmap) are: + 1: Enables sending data in the opening SYN on the client + 5: Enables sending data in the opening SYN on the client regardless + of cookie availability. + + Default: 0 + tcp_syn_retries - INTEGER Number of times initial SYNs for an active TCP connection attempt will be retransmitted. Should not be higher than 255. Default value @@ -551,6 +564,25 @@ tcp_thin_dupack - BOOLEAN Documentation/networking/tcp-thin.txt Default: 0 +tcp_limit_output_bytes - INTEGER + Controls TCP Small Queue limit per tcp socket. + TCP bulk sender tends to increase packets in flight until it + gets losses notifications. With SNDBUF autotuning, this can + result in a large amount of packets queued in qdisc/device + on the local machine, hurting latency of other flows, for + typical pfifo_fast qdiscs. + tcp_limit_output_bytes limits the number of bytes on qdisc + or device to reduce artificial RTT/cwnd and reduce bufferbloat. + Note: For GSO/TSO enabled flows, we try to have at least two + packets in flight. Reducing tcp_limit_output_bytes might also + reduce the size of individual GSO packet (64KB being the max) + Default: 131072 + +tcp_challenge_ack_limit - INTEGER + Limits number of Challenge ACK sent per second, as recommended + in RFC 5961 (Improving TCP's Robustness to Blind In-Window Attacks) + Default: 100 + UDP variables: udp_mem - vector of 3 INTEGERs: min, pressure, max @@ -857,9 +889,19 @@ accept_source_route - BOOLEAN FALSE (host) accept_local - BOOLEAN - Accept packets with local source addresses. In combination with - suitable routing, this can be used to direct packets between two - local interfaces over the wire and have them accepted properly. + Accept packets with local source addresses. In combination + with suitable routing, this can be used to direct packets + between two local interfaces over the wire and have them + accepted properly. + + rp_filter must be set to a non-zero value in order for + accept_local to have an effect. + + default FALSE + +route_localnet - BOOLEAN + Do not consider loopback addresses as martian source or destination + while routing. This enables the use of 127/8 for local routing purposes. default FALSE rp_filter - INTEGER @@ -1398,6 +1440,20 @@ path_max_retrans - INTEGER Default: 5 +pf_retrans - INTEGER + The number of retransmissions that will be attempted on a given path + before traffic is redirected to an alternate transport (should one + exist). Note this is distinct from path_max_retrans, as a path that + passes the pf_retrans threshold can still be used. Its only + deprioritized when a transmission path is selected by the stack. This + setting is primarily used to enable fast failover mechanisms without + having to reduce path_max_retrans to a very low value. See: + http://www.ietf.org/id/draft-nishida-tsvwg-sctp-failover-05.txt + for details. Note also that a value of pf_retrans > path_max_retrans + disables this feature + + Default: 0 + rto_initial - INTEGER The initial round trip timeout value in milliseconds that will be used in calculating round trip times. This is the initial time interval diff --git a/Documentation/networking/openvswitch.txt b/Documentation/networking/openvswitch.txt index b8a048b8df3ad595c341928f09be127786f5147b..8fa2dd1e792e3ae3a1555dbb99c2048981452c6f 100644 --- a/Documentation/networking/openvswitch.txt +++ b/Documentation/networking/openvswitch.txt @@ -118,7 +118,7 @@ essentially like this, ignoring metadata: Naively, to add VLAN support, it makes sense to add a new "vlan" flow key attribute to contain the VLAN tag, then continue to decode the encapsulated headers beyond the VLAN tag using the existing field -definitions. With this change, an TCP packet in VLAN 10 would have a +definitions. With this change, a TCP packet in VLAN 10 would have a flow key much like this: eth(...), vlan(vid=10, pcp=0), eth_type(0x0800), ip(proto=6, ...), tcp(...) diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt index 4be0c039edbc14ae13e8cb2bf2caf7b9042f46cb..d2a9f43b5546684fec415e957617869e418ed140 100644 --- a/Documentation/networking/s2io.txt +++ b/Documentation/networking/s2io.txt @@ -136,16 +136,6 @@ For more information, please review the AMD8131 errata at http://vip.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/ 26310_AMD-8131_HyperTransport_PCI-X_Tunnel_Revision_Guide_rev_3_18.pdf -6. Available Downloads -Neterion "s2io" driver in Red Hat and Suse 2.6-based distributions is kept up -to date, also the latest "s2io" code (including support for 2.4 kernels) is -available via "Support" link on the Neterion site: http://www.neterion.com. - -For Xframe User Guide (Programming manual), visit ftp site ns1.s2io.com, -user: linuxdocs password: HALdocs - -7. Support +6. Support For further support please contact either your 10GbE Xframe NIC vendor (IBM, -HP, SGI etc.) or click on the "Support" link on the Neterion site: -http://www.neterion.com. - +HP, SGI etc.) diff --git a/Documentation/networking/stmmac.txt b/Documentation/networking/stmmac.txt index 5cb9a1972460fdcd2909f3a9fd06dd4c265a2921..c676b9cedbd0d90a802ce82c09e49a219560570c 100644 --- a/Documentation/networking/stmmac.txt +++ b/Documentation/networking/stmmac.txt @@ -257,9 +257,11 @@ reset procedure etc). o Makefile o stmmac_main.c: main network device driver; o stmmac_mdio.c: mdio functions; + o stmmac_pci: PCI driver; + o stmmac_platform.c: platform driver o stmmac_ethtool.c: ethtool support; o stmmac_timer.[ch]: timer code used for mitigating the driver dma interrupts - Only tested on ST40 platforms based. + (only tested on ST40 platforms based); o stmmac.h: private driver structure; o common.h: common definitions and VFTs; o descs.h: descriptor structure definitions; @@ -269,9 +271,11 @@ reset procedure etc). o dwmac100_core: MAC 100 core and dma code; o dwmac100_dma.c: dma funtions for the MAC chip; o dwmac1000.h: specific header file for the MAC; - o dwmac_lib.c: generic DMA functions shared among chips - o enh_desc.c: functions for handling enhanced descriptors - o norm_desc.c: functions for handling normal descriptors + o dwmac_lib.c: generic DMA functions shared among chips; + o enh_desc.c: functions for handling enhanced descriptors; + o norm_desc.c: functions for handling normal descriptors; + o chain_mode.c/ring_mode.c:: functions to manage RING/CHAINED modes; + o mmc_core.c/mmc.h: Management MAC Counters; 5) Debug Information @@ -304,7 +308,27 @@ All these are only useful during the developing stage and should never enabled inside the code for general usage. In fact, these can generate an huge amount of debug messages. -6) TODO: +6) Energy Efficient Ethernet + +Energy Efficient Ethernet(EEE) enables IEEE 802.3 MAC sublayer along +with a family of Physical layer to operate in the Low power Idle(LPI) +mode. The EEE mode supports the IEEE 802.3 MAC operation at 100Mbps, +1000Mbps & 10Gbps. + +The LPI mode allows power saving by switching off parts of the +communication device functionality when there is no data to be +transmitted & received. The system on both the side of the link can +disable some functionalities & save power during the period of low-link +utilization. The MAC controls whether the system should enter or exit +the LPI mode & communicate this to PHY. + +As soon as the interface is opened, the driver verifies if the EEE can +be supported. This is done by looking at both the DMA HW capability +register and the PHY devices MCD registers. +To enter in Tx LPI mode the driver needs to have a software timer +that enable and disable the LPI mode when there is nothing to be +transmitted. + +7) TODO: o XGMAC is not supported. - o Add the EEE - Energy Efficient Ethernet o Add the PTP - precision time protocol diff --git a/Documentation/networking/vxge.txt b/Documentation/networking/vxge.txt index d2e2997e6fa01c906158600497364851ba2efca7..bb76c667a476557df0416a43f2ad622247fbd65c 100644 --- a/Documentation/networking/vxge.txt +++ b/Documentation/networking/vxge.txt @@ -91,10 +91,3 @@ v) addr_learn_en virtualization environment. Valid range: 0,1 (disabled, enabled respectively) Default: 0 - -4) Troubleshooting: -------------------- - -To resolve an issue with the source code or X3100 series adapter, please collect -the statistics, register dumps using ethool, relevant logs and email them to -support@neterion.com. diff --git a/Documentation/nfc/nfc-hci.txt b/Documentation/nfc/nfc-hci.txt index 320f9336c78140266e7ab43a5f5b16e94450cc99..89a339c9b079160429bb43f133049e83ebfe7f4d 100644 --- a/Documentation/nfc/nfc-hci.txt +++ b/Documentation/nfc/nfc-hci.txt @@ -178,3 +178,36 @@ ANY_GET_PARAMETER to the reader A gate to get information on the target that was discovered). Typically, such an event will be propagated to NFC Core from MSGRXWQ context. + +Error management +---------------- + +Errors that occur synchronously with the execution of an NFC Core request are +simply returned as the execution result of the request. These are easy. + +Errors that occur asynchronously (e.g. in a background protocol handling thread) +must be reported such that upper layers don't stay ignorant that something +went wrong below and know that expected events will probably never happen. +Handling of these errors is done as follows: + +- driver (pn544) fails to deliver an incoming frame: it stores the error such +that any subsequent call to the driver will result in this error. Then it calls +the standard nfc_shdlc_recv_frame() with a NULL argument to report the problem +above. shdlc stores a EREMOTEIO sticky status, which will trigger SMW to +report above in turn. + +- SMW is basically a background thread to handle incoming and outgoing shdlc +frames. This thread will also check the shdlc sticky status and report to HCI +when it discovers it is not able to run anymore because of an unrecoverable +error that happened within shdlc or below. If the problem occurs during shdlc +connection, the error is reported through the connect completion. + +- HCI: if an internal HCI error happens (frame is lost), or HCI is reported an +error from a lower layer, HCI will either complete the currently executing +command with that error, or notify NFC Core directly if no command is executing. + +- NFC Core: when NFC Core is notified of an error from below and polling is +active, it will send a tag discovered event with an empty tag list to the user +space to let it know that the poll operation will never be able to detect a tag. +If polling is not active and the error was sticky, lower levels will return it +at next invocation. diff --git a/Documentation/power/devices.txt b/Documentation/power/devices.txt index 872815cd41d30bcc8e57df31b6b283a4872a2690..504dfe4d52eba3541cfa6330d52595d37265a0b7 100644 --- a/Documentation/power/devices.txt +++ b/Documentation/power/devices.txt @@ -583,9 +583,10 @@ for the given device during all power transitions, instead of the respective subsystem-level callbacks. Specifically, if a device's pm_domain pointer is not NULL, the ->suspend() callback from the object pointed to by it will be executed instead of its subsystem's (e.g. bus type's) ->suspend() callback and -anlogously for all of the remaining callbacks. In other words, power management -domain callbacks, if defined for the given device, always take precedence over -the callbacks provided by the device's subsystem (e.g. bus type). +analogously for all of the remaining callbacks. In other words, power +management domain callbacks, if defined for the given device, always take +precedence over the callbacks provided by the device's subsystem (e.g. bus +type). The support for device power management domains is only relevant to platforms needing to use the same device driver power management callbacks in many @@ -598,7 +599,7 @@ it into account in any way. Device Low Power (suspend) States --------------------------------- Device low-power states aren't standard. One device might only handle -"on" and "off, while another might support a dozen different versions of +"on" and "off", while another might support a dozen different versions of "on" (how many engines are active?), plus a state that gets back to "on" faster than from a full "off". diff --git a/Documentation/power/swsusp.txt b/Documentation/power/swsusp.txt index ac190cf1963e05e310edf6a96df2466f01eb1355..92341b84250dfaf137b89376c115597a4bd9c222 100644 --- a/Documentation/power/swsusp.txt +++ b/Documentation/power/swsusp.txt @@ -33,6 +33,11 @@ echo shutdown > /sys/power/disk; echo disk > /sys/power/state echo platform > /sys/power/disk; echo disk > /sys/power/state +. If you would like to write hibernation image to swap and then suspend +to RAM (provided your platform supports it), you can try + +echo suspend > /sys/power/disk; echo disk > /sys/power/state + . If you have SATA disks, you'll need recent kernels with SATA suspend support. For suspend and resume to work, make sure your disk drivers are built into kernel -- not modules. [There's way to make diff --git a/Documentation/prctl/no_new_privs.txt b/Documentation/prctl/no_new_privs.txt new file mode 100644 index 0000000000000000000000000000000000000000..f7be84fba9105cc21ce8c121a040ad42c60be1de --- /dev/null +++ b/Documentation/prctl/no_new_privs.txt @@ -0,0 +1,57 @@ +The execve system call can grant a newly-started program privileges that +its parent did not have. The most obvious examples are setuid/setgid +programs and file capabilities. To prevent the parent program from +gaining these privileges as well, the kernel and user code must be +careful to prevent the parent from doing anything that could subvert the +child. For example: + + - The dynamic loader handles LD_* environment variables differently if + a program is setuid. + + - chroot is disallowed to unprivileged processes, since it would allow + /etc/passwd to be replaced from the point of view of a process that + inherited chroot. + + - The exec code has special handling for ptrace. + +These are all ad-hoc fixes. The no_new_privs bit (since Linux 3.5) is a +new, generic mechanism to make it safe for a process to modify its +execution environment in a manner that persists across execve. Any task +can set no_new_privs. Once the bit is set, it is inherited across fork, +clone, and execve and cannot be unset. With no_new_privs set, execve +promises not to grant the privilege to do anything that could not have +been done without the execve call. For example, the setuid and setgid +bits will no longer change the uid or gid; file capabilities will not +add to the permitted set, and LSMs will not relax constraints after +execve. + +To set no_new_privs, use prctl(PR_SET_NO_NEW_PRIVS, 1, 0, 0, 0). + +Be careful, though: LSMs might also not tighten constraints on exec +in no_new_privs mode. (This means that setting up a general-purpose +service launcher to set no_new_privs before execing daemons may +interfere with LSM-based sandboxing.) + +Note that no_new_privs does not prevent privilege changes that do not +involve execve. An appropriately privileged task can still call +setuid(2) and receive SCM_RIGHTS datagrams. + +There are two main use cases for no_new_privs so far: + + - Filters installed for the seccomp mode 2 sandbox persist across + execve and can change the behavior of newly-executed programs. + Unprivileged users are therefore only allowed to install such filters + if no_new_privs is set. + + - By itself, no_new_privs can be used to reduce the attack surface + available to an unprivileged user. If everything running with a + given uid has no_new_privs set, then that uid will be unable to + escalate its privileges by directly attacking setuid, setgid, and + fcap-using binaries; it will need to compromise something without the + no_new_privs bit set first. + +In the future, other potentially dangerous kernel features could become +available to unprivileged tasks if no_new_privs is set. In principle, +several options to unshare(2) and clone(2) would be safe when +no_new_privs is set, and no_new_privs + chroot is considerable less +dangerous than chroot by itself. diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 221b81016dba75e48b8ec0e253c13d97f5be5127..4e4d0bc9816f9d25f1c185d795f98b476bb50a2c 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -875,8 +875,7 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. setup before initializing the codecs. This option is available only when CONFIG_SND_HDA_PATCH_LOADER=y is set. See HD-Audio.txt for details. - beep_mode - Selects the beep registration mode (0=off, 1=on, 2= - dynamic registration via mute switch on/off); the default + beep_mode - Selects the beep registration mode (0=off, 1=on); default value is set via CONFIG_SND_HDA_INPUT_BEEP_MODE kconfig. [Single (global) options] diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 03f7897c641425346e674c360df2ccf97b5b59d3..7456360e161cbe2962eb4850f05ef0cf45c30657 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -15,19 +15,24 @@ ALC260 ALC262 ====== - N/A + inv-dmic Inverted internal mic workaround ALC267/268 ========== - N/A + inv-dmic Inverted internal mic workaround -ALC269 +ALC269/270/275/276/280/282 ====== laptop-amic Laptops with analog-mic input laptop-dmic Laptops with digital-mic input + alc269-dmic Enable ALC269(VA) digital mic workaround + alc271-dmic Enable ALC271X digital mic workaround + inv-dmic Inverted internal mic workaround + lenovo-dock Enables docking station I/O for some Lenovos ALC662/663/272 ============== + mario Chromebook mario model fixup asus-mode1 ASUS asus-mode2 ASUS asus-mode3 ASUS @@ -36,6 +41,7 @@ ALC662/663/272 asus-mode6 ASUS asus-mode7 ASUS asus-mode8 ASUS + inv-dmic Inverted internal mic workaround ALC680 ====== @@ -46,6 +52,7 @@ ALC882/883/885/888/889 acer-aspire-4930g Acer Aspire 4930G/5930G/6530G/6930G/7730G acer-aspire-8930g Acer Aspire 8330G/6935G acer-aspire Acer Aspire others + inv-dmic Inverted internal mic workaround ALC861/660 ========== diff --git a/Documentation/sound/alsa/hdspm.txt b/Documentation/sound/alsa/hdspm.txt index 7a67ff71a9f87eb3e7d5edc9086578525b4efd3e..7ba31948dea72191f72b25e5b7390303b17d7ab2 100644 --- a/Documentation/sound/alsa/hdspm.txt +++ b/Documentation/sound/alsa/hdspm.txt @@ -359,4 +359,4 @@ Calling Parameter: enable_monitor int array (min = 1, max = 8), "Enable Analog Out on Channel 63/64 by default." - note: here the analog output is enabled (but not routed). \ No newline at end of file + note: here the analog output is enabled (but not routed). diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt index f0ab5cf28fcae0a1ff0783bf8a4ddc477447f585..4a7b54bd37e8c18b2eebfcd21608a2488589641b 100644 --- a/Documentation/stable_kernel_rules.txt +++ b/Documentation/stable_kernel_rules.txt @@ -12,6 +12,12 @@ Rules on what kind of patches are accepted, and which ones are not, into the marked CONFIG_BROKEN), an oops, a hang, data corruption, a real security issue, or some "oh, that's not good" issue. In short, something critical. + - Serious issues as reported by a user of a distribution kernel may also + be considered if they fix a notable performance or interactivity issue. + As these fixes are not as obvious and have a higher risk of a subtle + regression they should only be submitted by a distribution kernel + maintainer and include an addendum linking to a bugzilla entry if it + exists and additional information on the user-visible impact. - New device IDs and quirks are also accepted. - No "theoretical race condition" issues, unless an explanation of how the race can be exploited is also provided. diff --git a/Documentation/video4linux/cpia2_overview.txt b/Documentation/video4linux/cpia2_overview.txt index a6e53665216bc8be5c30ce1454d001023c2b656d..ad6adbedfe50085c1bf57224404707d473b32b7c 100644 --- a/Documentation/video4linux/cpia2_overview.txt +++ b/Documentation/video4linux/cpia2_overview.txt @@ -35,4 +35,4 @@ the camera. There are three modes for this. Block mode requests a number of contiguous registers. Random mode reads or writes random registers with a tuple structure containing address/value pairs. The repeat mode is only used by VP4 to load a firmware patch. It contains a starting address and -a sequence of bytes to be written into a gpio port. \ No newline at end of file +a sequence of bytes to be written into a gpio port. diff --git a/Documentation/video4linux/stv680.txt b/Documentation/video4linux/stv680.txt index 4f8946f32f51b620a051fab35aac66ab01796f2b..e3de33645308f507facffa9859a3e99217ce85b9 100644 --- a/Documentation/video4linux/stv680.txt +++ b/Documentation/video4linux/stv680.txt @@ -50,4 +50,4 @@ The latest info on this driver can be found at: http://personal.clt.bellsouth.net/~kjsisson or at http://stv0680-usb.sourceforge.net -Any questions to me can be send to: kjsisson@bellsouth.net \ No newline at end of file +Any questions to me can be send to: kjsisson@bellsouth.net diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 930126698a0f5b0f6e2c458b53604d581b201063..bf33aaa4c59f8f2e507fdd3e9c32528b16e831d1 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -1930,6 +1930,57 @@ The "pte_enc" field provides a value that can OR'ed into the hash PTE's RPN field (ie, it needs to be shifted left by 12 to OR it into the hash PTE second double word). +4.75 KVM_IRQFD + +Capability: KVM_CAP_IRQFD +Architectures: x86 +Type: vm ioctl +Parameters: struct kvm_irqfd (in) +Returns: 0 on success, -1 on error + +Allows setting an eventfd to directly trigger a guest interrupt. +kvm_irqfd.fd specifies the file descriptor to use as the eventfd and +kvm_irqfd.gsi specifies the irqchip pin toggled by this event. When +an event is tiggered on the eventfd, an interrupt is injected into +the guest using the specified gsi pin. The irqfd is removed using +the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd +and kvm_irqfd.gsi. + +4.76 KVM_PPC_ALLOCATE_HTAB + +Capability: KVM_CAP_PPC_ALLOC_HTAB +Architectures: powerpc +Type: vm ioctl +Parameters: Pointer to u32 containing hash table order (in/out) +Returns: 0 on success, -1 on error + +This requests the host kernel to allocate an MMU hash table for a +guest using the PAPR paravirtualization interface. This only does +anything if the kernel is configured to use the Book 3S HV style of +virtualization. Otherwise the capability doesn't exist and the ioctl +returns an ENOTTY error. The rest of this description assumes Book 3S +HV. + +There must be no vcpus running when this ioctl is called; if there +are, it will do nothing and return an EBUSY error. + +The parameter is a pointer to a 32-bit unsigned integer variable +containing the order (log base 2) of the desired size of the hash +table, which must be between 18 and 46. On successful return from the +ioctl, it will have been updated with the order of the hash table that +was allocated. + +If no hash table has been allocated when any vcpu is asked to run +(with the KVM_RUN ioctl), the host kernel will allocate a +default-sized hash table (16 MB). + +If this ioctl is called when a hash table has already been allocated, +the kernel will clear out the existing hash table (zero all HPTEs) and +return the hash table order in the parameter. (If the guest is using +the virtualized real-mode area (VRMA) facility, the kernel will +re-create the VMRA HPTEs on the next KVM_RUN of any vcpu.) + + 5. The kvm_run structure ------------------------ diff --git a/Documentation/virtual/kvm/locking.txt b/Documentation/virtual/kvm/locking.txt index 3b4cd3bf56314d0766b5645a8583b0e47ad843de..41b7ac9884b5ebdeaba602077bebb11efebcc648 100644 --- a/Documentation/virtual/kvm/locking.txt +++ b/Documentation/virtual/kvm/locking.txt @@ -6,7 +6,129 @@ KVM Lock Overview (to be written) -2. Reference +2: Exception +------------ + +Fast page fault: + +Fast page fault is the fast path which fixes the guest page fault out of +the mmu-lock on x86. Currently, the page fault can be fast only if the +shadow page table is present and it is caused by write-protect, that means +we just need change the W bit of the spte. + +What we use to avoid all the race is the SPTE_HOST_WRITEABLE bit and +SPTE_MMU_WRITEABLE bit on the spte: +- SPTE_HOST_WRITEABLE means the gfn is writable on host. +- SPTE_MMU_WRITEABLE means the gfn is writable on mmu. The bit is set when + the gfn is writable on guest mmu and it is not write-protected by shadow + page write-protection. + +On fast page fault path, we will use cmpxchg to atomically set the spte W +bit if spte.SPTE_HOST_WRITEABLE = 1 and spte.SPTE_WRITE_PROTECT = 1, this +is safe because whenever changing these bits can be detected by cmpxchg. + +But we need carefully check these cases: +1): The mapping from gfn to pfn +The mapping from gfn to pfn may be changed since we can only ensure the pfn +is not changed during cmpxchg. This is a ABA problem, for example, below case +will happen: + +At the beginning: +gpte = gfn1 +gfn1 is mapped to pfn1 on host +spte is the shadow page table entry corresponding with gpte and +spte = pfn1 + + VCPU 0 VCPU0 +on fast page fault path: + + old_spte = *spte; + pfn1 is swapped out: + spte = 0; + + pfn1 is re-alloced for gfn2. + + gpte is changed to point to + gfn2 by the guest: + spte = pfn1; + + if (cmpxchg(spte, old_spte, old_spte+W) + mark_page_dirty(vcpu->kvm, gfn1) + OOPS!!! + +We dirty-log for gfn1, that means gfn2 is lost in dirty-bitmap. + +For direct sp, we can easily avoid it since the spte of direct sp is fixed +to gfn. For indirect sp, before we do cmpxchg, we call gfn_to_pfn_atomic() +to pin gfn to pfn, because after gfn_to_pfn_atomic(): +- We have held the refcount of pfn that means the pfn can not be freed and + be reused for another gfn. +- The pfn is writable that means it can not be shared between different gfns + by KSM. + +Then, we can ensure the dirty bitmaps is correctly set for a gfn. + +Currently, to simplify the whole things, we disable fast page fault for +indirect shadow page. + +2): Dirty bit tracking +In the origin code, the spte can be fast updated (non-atomically) if the +spte is read-only and the Accessed bit has already been set since the +Accessed bit and Dirty bit can not be lost. + +But it is not true after fast page fault since the spte can be marked +writable between reading spte and updating spte. Like below case: + +At the beginning: +spte.W = 0 +spte.Accessed = 1 + + VCPU 0 VCPU0 +In mmu_spte_clear_track_bits(): + + old_spte = *spte; + + /* 'if' condition is satisfied. */ + if (old_spte.Accssed == 1 && + old_spte.W == 0) + spte = 0ull; + on fast page fault path: + spte.W = 1 + memory write on the spte: + spte.Dirty = 1 + + + else + old_spte = xchg(spte, 0ull) + + + if (old_spte.Accssed == 1) + kvm_set_pfn_accessed(spte.pfn); + if (old_spte.Dirty == 1) + kvm_set_pfn_dirty(spte.pfn); + OOPS!!! + +The Dirty bit is lost in this case. + +In order to avoid this kind of issue, we always treat the spte as "volatile" +if it can be updated out of mmu-lock, see spte_has_volatile_bits(), it means, +the spte is always atomicly updated in this case. + +3): flush tlbs due to spte updated +If the spte is updated from writable to readonly, we should flush all TLBs, +otherwise rmap_write_protect will find a read-only spte, even though the +writable spte might be cached on a CPU's TLB. + +As mentioned before, the spte can be updated to writable out of mmu-lock on +fast page fault path, in order to easily audit the path, we see if TLBs need +be flushed caused by this reason in mmu_spte_update() since this is a common +function to update spte (present -> present). + +Since the spte is "volatile" if it can be updated out of mmu-lock, we always +atomicly update the spte, the race caused by fast page fault can be avoided, +See the comments in spte_has_volatile_bits() and mmu_spte_update(). + +3. Reference ------------ Name: kvm_lock @@ -23,3 +145,9 @@ Arch: x86 Protects: - kvm_arch::{last_tsc_write,last_tsc_nsec,last_tsc_offset} - tsc offset in vmcb Comment: 'raw' because updating the tsc offsets must not be preempted. + +Name: kvm->mmu_lock +Type: spinlock_t +Arch: any +Protects: -shadow page/shadow tlb entry +Comment: it is a spinlock since it is used in mmu notifier. diff --git a/Documentation/virtual/kvm/msr.txt b/Documentation/virtual/kvm/msr.txt index 96b41bd975233502e9a31fc1906f457e1a4d259e..730471048583b9a034a78eb1da4b805373f29c25 100644 --- a/Documentation/virtual/kvm/msr.txt +++ b/Documentation/virtual/kvm/msr.txt @@ -223,3 +223,36 @@ MSR_KVM_STEAL_TIME: 0x4b564d03 steal: the amount of time in which this vCPU did not run, in nanoseconds. Time during which the vcpu is idle, will not be reported as steal time. + +MSR_KVM_EOI_EN: 0x4b564d04 + data: Bit 0 is 1 when PV end of interrupt is enabled on the vcpu; 0 + when disabled. Bit 1 is reserved and must be zero. When PV end of + interrupt is enabled (bit 0 set), bits 63-2 hold a 4-byte aligned + physical address of a 4 byte memory area which must be in guest RAM and + must be zeroed. + + The first, least significant bit of 4 byte memory location will be + written to by the hypervisor, typically at the time of interrupt + injection. Value of 1 means that guest can skip writing EOI to the apic + (using MSR or MMIO write); instead, it is sufficient to signal + EOI by clearing the bit in guest memory - this location will + later be polled by the hypervisor. + Value of 0 means that the EOI write is required. + + It is always safe for the guest to ignore the optimization and perform + the APIC EOI write anyway. + + Hypervisor is guaranteed to only modify this least + significant bit while in the current VCPU context, this means that + guest does not need to use either lock prefix or memory ordering + primitives to synchronise with the hypervisor. + + However, hypervisor can set and clear this memory bit at any time: + therefore to make sure hypervisor does not interrupt the + guest and clear the least significant bit in the memory area + in the window between guest testing it to detect + whether it can skip EOI apic write and between guest + clearing it to signal EOI to the hypervisor, + guest must both read the least significant bit in the memory area and + clear it using a single CPU instruction, such as test and clear, or + compare and exchange. diff --git a/Documentation/virtual/kvm/ppc-pv.txt b/Documentation/virtual/kvm/ppc-pv.txt index 6e7c370509304e61b272043ad91f35b2c6328c8e..4911cf95c67e51507118139a7d20897f67fbd888 100644 --- a/Documentation/virtual/kvm/ppc-pv.txt +++ b/Documentation/virtual/kvm/ppc-pv.txt @@ -109,8 +109,6 @@ The following bits are safe to be set inside the guest: MSR_EE MSR_RI - MSR_CR - MSR_ME If any other bit changes in the MSR, please still use mtmsr(d). diff --git a/Documentation/vm/frontswap.txt b/Documentation/vm/frontswap.txt index 37067cf455f4de3792dbcaa54326205238bf1652..5ef2d1366425416128d252fab11f884350a758fc 100644 --- a/Documentation/vm/frontswap.txt +++ b/Documentation/vm/frontswap.txt @@ -25,7 +25,7 @@ with the specified swap device number (aka "type"). A "store" will copy the page to transcendent memory and associate it with the type and offset associated with the page. A "load" will copy the page, if found, from transcendent memory into kernel memory, but will NOT remove the page -from from transcendent memory. An "invalidate_page" will remove the page +from transcendent memory. An "invalidate_page" will remove the page from transcendent memory and an "invalidate_area" will remove ALL pages associated with the swap type (e.g., like swapoff) and notify the "device" to refuse further stores with that swap type. @@ -99,7 +99,7 @@ server configured with a large amount of RAM... without pre-configuring how much of the RAM is available for each of the clients! In the virtual case, the whole point of virtualization is to statistically -multiplex physical resources acrosst the varying demands of multiple +multiplex physical resources across the varying demands of multiple virtual machines. This is really hard to do with RAM and efforts to do it well with no kernel changes have essentially failed (except in some well-publicized special-case workloads). diff --git a/Documentation/workqueue.txt b/Documentation/workqueue.txt index a0b577de918f7cd3fcdec46f06b72f7de074d6d8..a6ab4b62d9261cc9b7690076019fe3bec04a79b4 100644 --- a/Documentation/workqueue.txt +++ b/Documentation/workqueue.txt @@ -89,25 +89,28 @@ called thread-pools. The cmwq design differentiates between the user-facing workqueues that subsystems and drivers queue work items on and the backend mechanism -which manages thread-pool and processes the queued work items. +which manages thread-pools and processes the queued work items. The backend is called gcwq. There is one gcwq for each possible CPU -and one gcwq to serve work items queued on unbound workqueues. +and one gcwq to serve work items queued on unbound workqueues. Each +gcwq has two thread-pools - one for normal work items and the other +for high priority ones. Subsystems and drivers can create and queue work items through special workqueue API functions as they see fit. They can influence some aspects of the way the work items are executed by setting flags on the workqueue they are putting the work item on. These flags include -things like CPU locality, reentrancy, concurrency limits and more. To -get a detailed overview refer to the API description of +things like CPU locality, reentrancy, concurrency limits, priority and +more. To get a detailed overview refer to the API description of alloc_workqueue() below. -When a work item is queued to a workqueue, the target gcwq is -determined according to the queue parameters and workqueue attributes -and appended on the shared worklist of the gcwq. For example, unless -specifically overridden, a work item of a bound workqueue will be -queued on the worklist of exactly that gcwq that is associated to the -CPU the issuer is running on. +When a work item is queued to a workqueue, the target gcwq and +thread-pool is determined according to the queue parameters and +workqueue attributes and appended on the shared worklist of the +thread-pool. For example, unless specifically overridden, a work item +of a bound workqueue will be queued on the worklist of either normal +or highpri thread-pool of the gcwq that is associated to the CPU the +issuer is running on. For any worker pool implementation, managing the concurrency level (how many execution contexts are active) is an important issue. cmwq @@ -115,26 +118,26 @@ tries to keep the concurrency at a minimal but sufficient level. Minimal to save resources and sufficient in that the system is used at its full capacity. -Each gcwq bound to an actual CPU implements concurrency management by -hooking into the scheduler. The gcwq is notified whenever an active -worker wakes up or sleeps and keeps track of the number of the -currently runnable workers. Generally, work items are not expected to -hog a CPU and consume many cycles. That means maintaining just enough -concurrency to prevent work processing from stalling should be -optimal. As long as there are one or more runnable workers on the -CPU, the gcwq doesn't start execution of a new work, but, when the -last running worker goes to sleep, it immediately schedules a new -worker so that the CPU doesn't sit idle while there are pending work -items. This allows using a minimal number of workers without losing -execution bandwidth. +Each thread-pool bound to an actual CPU implements concurrency +management by hooking into the scheduler. The thread-pool is notified +whenever an active worker wakes up or sleeps and keeps track of the +number of the currently runnable workers. Generally, work items are +not expected to hog a CPU and consume many cycles. That means +maintaining just enough concurrency to prevent work processing from +stalling should be optimal. As long as there are one or more runnable +workers on the CPU, the thread-pool doesn't start execution of a new +work, but, when the last running worker goes to sleep, it immediately +schedules a new worker so that the CPU doesn't sit idle while there +are pending work items. This allows using a minimal number of workers +without losing execution bandwidth. Keeping idle workers around doesn't cost other than the memory space for kthreads, so cmwq holds onto idle ones for a while before killing them. For an unbound wq, the above concurrency management doesn't apply and -the gcwq for the pseudo unbound CPU tries to start executing all work -items as soon as possible. The responsibility of regulating +the thread-pools for the pseudo unbound CPU try to start executing all +work items as soon as possible. The responsibility of regulating concurrency level is on the users. There is also a flag to mark a bound wq to ignore the concurrency management. Please refer to the API section for details. @@ -205,31 +208,22 @@ resources, scheduled and executed. WQ_HIGHPRI - Work items of a highpri wq are queued at the head of the - worklist of the target gcwq and start execution regardless of - the current concurrency level. In other words, highpri work - items will always start execution as soon as execution - resource is available. + Work items of a highpri wq are queued to the highpri + thread-pool of the target gcwq. Highpri thread-pools are + served by worker threads with elevated nice level. - Ordering among highpri work items is preserved - a highpri - work item queued after another highpri work item will start - execution after the earlier highpri work item starts. - - Although highpri work items are not held back by other - runnable work items, they still contribute to the concurrency - level. Highpri work items in runnable state will prevent - non-highpri work items from starting execution. - - This flag is meaningless for unbound wq. + Note that normal and highpri thread-pools don't interact with + each other. Each maintain its separate pool of workers and + implements concurrency management among its workers. WQ_CPU_INTENSIVE Work items of a CPU intensive wq do not contribute to the concurrency level. In other words, runnable CPU intensive - work items will not prevent other work items from starting - execution. This is useful for bound work items which are - expected to hog CPU cycles so that their execution is - regulated by the system scheduler. + work items will not prevent other work items in the same + thread-pool from starting execution. This is useful for bound + work items which are expected to hog CPU cycles so that their + execution is regulated by the system scheduler. Although CPU intensive work items don't contribute to the concurrency level, start of their executions is still @@ -239,14 +233,6 @@ resources, scheduled and executed. This flag is meaningless for unbound wq. - WQ_HIGHPRI | WQ_CPU_INTENSIVE - - This combination makes the wq avoid interaction with - concurrency management completely and behave as a simple - per-CPU execution context provider. Work items queued on a - highpri CPU-intensive wq start execution as soon as resources - are available and don't affect execution of other work items. - @max_active: @max_active determines the maximum number of execution contexts per @@ -328,20 +314,7 @@ If @max_active == 2, 35 w2 wakes up and finishes Now, let's assume w1 and w2 are queued to a different wq q1 which has -WQ_HIGHPRI set, - - TIME IN MSECS EVENT - 0 w1 and w2 start and burn CPU - 5 w1 sleeps - 10 w2 sleeps - 10 w0 starts and burns CPU - 15 w0 sleeps - 15 w1 wakes up and finishes - 20 w2 wakes up and finishes - 25 w0 wakes up and burns CPU - 30 w0 finishes - -If q1 has WQ_CPU_INTENSIVE set, +WQ_CPU_INTENSIVE set, TIME IN MSECS EVENT 0 w0 starts and burns CPU diff --git a/MAINTAINERS b/MAINTAINERS index eb22272b2116c70cb6a6af438c24ab9f2edad9fb..9b8a5daaf403e52345be2096f0b697f6c3dfc97f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -329,7 +329,7 @@ F: drivers/hwmon/adm1029.c ADM8211 WIRELESS DRIVER L: linux-wireless@vger.kernel.org -W: http://linuxwireless.org/ +W: http://wireless.kernel.org/ S: Orphan F: drivers/net/wireless/adm8211.* @@ -894,6 +894,14 @@ ARM/MAGICIAN MACHINE SUPPORT M: Philipp Zabel S: Maintained +ARM/Marvell Armada 370 and Armada XP SOC support +M: Jason Cooper +M: Andrew Lunn +M: Gregory Clement +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-mvebu/ + ARM/Marvell Dove/Kirkwood/MV78xx0/Orion SOC support M: Jason Cooper M: Andrew Lunn @@ -1103,6 +1111,16 @@ S: Supported F: arch/arm/mach-shmobile/ F: drivers/sh/ +ARM/SOCFPGA ARCHITECTURE +M: Dinh Nguyen +S: Maintained +F: arch/arm/mach-socfpga/ + +ARM/SOCFPGA CLOCK FRAMEWORK SUPPORT +M: Dinh Nguyen +S: Maintained +F: drivers/clk/socfpga/ + ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT M: Lennert Buytenhek L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -1423,7 +1441,7 @@ B43 WIRELESS DRIVER M: Stefano Brivio L: linux-wireless@vger.kernel.org L: b43-dev@lists.infradead.org -W: http://linuxwireless.org/en/users/Drivers/b43 +W: http://wireless.kernel.org/en/users/Drivers/b43 S: Maintained F: drivers/net/wireless/b43/ @@ -1432,7 +1450,7 @@ M: Larry Finger M: Stefano Brivio L: linux-wireless@vger.kernel.org L: b43-dev@lists.infradead.org -W: http://linuxwireless.org/en/users/Drivers/b43 +W: http://wireless.kernel.org/en/users/Drivers/b43 S: Maintained F: drivers/net/wireless/b43legacy/ @@ -1595,6 +1613,7 @@ M: Arend van Spriel M: Franky (Zhenhui) Lin M: Kan Yan L: linux-wireless@vger.kernel.org +L: brcm80211-dev-list@broadcom.com S: Supported F: drivers/net/wireless/brcm80211/ @@ -3433,13 +3452,14 @@ S: Supported F: drivers/idle/i7300_idle.c IEEE 802.15.4 SUBSYSTEM +M: Alexander Smirnov M: Dmitry Eremin-Solenikov -M: Sergey Lapin L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://apps.sourceforge.net/trac/linux-zigbee T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git S: Maintained F: net/ieee802154/ +F: net/mac802154/ F: drivers/ieee802154/ IIO SUBSYSTEM AND DRIVERS @@ -3660,14 +3680,6 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi.git S: Supported F: drivers/net/wireless/iwlwifi/ -INTEL WIRELESS MULTICOMM 3200 WIFI (iwmc3200wifi) -M: Samuel Ortiz -M: Intel Linux Wireless -L: linux-wireless@vger.kernel.org -S: Supported -W: http://wireless.kernel.org/en/users/Drivers/iwmc3200wifi -F: drivers/net/wireless/iwmc3200wifi/ - INTEL MANAGEMENT ENGINE (mei) M: Tomas Winkler L: linux-kernel@vger.kernel.org @@ -3990,8 +4002,8 @@ F: arch/ia64/include/asm/kvm* F: arch/ia64/kvm/ KERNEL VIRTUAL MACHINE for s390 (KVM/s390) -M: Carsten Otte M: Christian Borntraeger +M: Cornelia Huck M: linux390@de.ibm.com L: linux-s390@vger.kernel.org W: http://www.ibm.com/developerworks/linux/linux390/ @@ -4351,7 +4363,7 @@ F: arch/m68k/hp300/ MAC80211 M: Johannes Berg L: linux-wireless@vger.kernel.org -W: http://linuxwireless.org/ +W: http://wireless.kernel.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained @@ -4363,7 +4375,7 @@ MAC80211 PID RATE CONTROL M: Stefano Brivio M: Mattias Nissler L: linux-wireless@vger.kernel.org -W: http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID +W: http://wireless.kernel.org/en/developers/Documentation/mac80211/RateControl/PID T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git S: Maintained @@ -4592,7 +4604,6 @@ S: Maintained F: drivers/usb/musb/ MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE) -M: Jon Mason M: Andrew Gallatin L: netdev@vger.kernel.org W: http://www.myri.com/scs/download-Myri10GE.html @@ -4637,8 +4648,6 @@ F: net/sched/sch_netem.c NETERION 10GbE DRIVERS (s2io/vxge) M: Jon Mason L: netdev@vger.kernel.org -W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous -W: http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous S: Supported F: Documentation/networking/s2io.txt F: Documentation/networking/vxge.txt @@ -4654,8 +4663,8 @@ L: netfilter@vger.kernel.org L: coreteam@netfilter.org W: http://www.netfilter.org/ W: http://www.iptables.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git -T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git +T: git git://1984.lsi.us.es/nf +T: git git://1984.lsi.us.es/nf-next S: Supported F: include/linux/netfilter* F: include/linux/netfilter/ @@ -4857,6 +4866,7 @@ M: Kevin Hilman L: linux-omap@vger.kernel.org S: Maintained F: arch/arm/*omap*/*pm* +F: drivers/cpufreq/omap-cpufreq.c OMAP POWERDOMAIN/CLOCKDOMAIN SOC ADAPTATION LAYER SUPPORT M: Rajendra Nayak @@ -5048,7 +5058,7 @@ F: fs/ocfs2/ ORINOCO DRIVER L: linux-wireless@vger.kernel.org -W: http://linuxwireless.org/en/users/Drivers/orinoco +W: http://wireless.kernel.org/en/users/Drivers/orinoco W: http://www.nongnu.org/orinoco/ S: Orphan F: drivers/net/wireless/orinoco/ @@ -5200,7 +5210,7 @@ PCI SUBSYSTEM M: Bjorn Helgaas L: linux-pci@vger.kernel.org Q: http://patchwork.ozlabs.org/project/linux-pci/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/linux.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci.git S: Supported F: Documentation/PCI/ F: drivers/pci/ @@ -5563,7 +5573,7 @@ F: Documentation/networking/LICENSE.qla3xxx F: drivers/net/ethernet/qlogic/qla3xxx.* QLOGIC QLCNIC (1/10)Gb ETHERNET DRIVER -M: Anirban Chakraborty +M: Jitendra Kalsaria M: Sony Chacko M: linux-driver@qlogic.com L: netdev@vger.kernel.org @@ -5571,7 +5581,6 @@ S: Supported F: drivers/net/ethernet/qlogic/qlcnic/ QLOGIC QLGE 10Gb ETHERNET DRIVER -M: Anirban Chakraborty M: Jitendra Kalsaria M: Ron Mercer M: linux-driver@qlogic.com @@ -5753,7 +5762,7 @@ F: net/rose/ RTL8180 WIRELESS DRIVER M: "John W. Linville" L: linux-wireless@vger.kernel.org -W: http://linuxwireless.org/ +W: http://wireless.kernel.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git S: Maintained F: drivers/net/wireless/rtl818x/rtl8180/ @@ -5763,7 +5772,7 @@ M: Herton Ronaldo Krzesinski M: Hin-Tak Leung M: Larry Finger L: linux-wireless@vger.kernel.org -W: http://linuxwireless.org/ +W: http://wireless.kernel.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git S: Maintained F: drivers/net/wireless/rtl818x/rtl8187/ @@ -5772,7 +5781,7 @@ RTL8192CE WIRELESS DRIVER M: Larry Finger M: Chaoming Li L: linux-wireless@vger.kernel.org -W: http://linuxwireless.org/ +W: http://wireless.kernel.org/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git S: Maintained F: drivers/net/wireless/rtlwifi/ @@ -5909,7 +5918,7 @@ M: Ingo Molnar M: Peter Zijlstra T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git sched/core S: Maintained -F: kernel/sched* +F: kernel/sched/ F: include/linux/sched.h SCORE ARCHITECTURE @@ -6211,6 +6220,15 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu.git F: include/linux/srcu* F: kernel/srcu* +SMACK SECURITY MODULE +M: Casey Schaufler +L: linux-security-module@vger.kernel.org +W: http://schaufler-ca.com +T: git git://git.gitorious.org/smack-next/kernel.git +S: Maintained +F: Documentation/security/Smack.txt +F: security/smack/ + SMC91x ETHERNET DRIVER M: Nicolas Pitre S: Odd Fixes @@ -6224,9 +6242,9 @@ F: Documentation/hwmon/smm665 F: drivers/hwmon/smm665.c SMSC EMC2103 HARDWARE MONITOR DRIVER -M: Steve Glendinning +M: Steve Glendinning L: lm-sensors@lm-sensors.org -S: Supported +S: Maintained F: Documentation/hwmon/emc2103 F: drivers/hwmon/emc2103.c @@ -6245,22 +6263,22 @@ F: Documentation/hwmon/smsc47b397 F: drivers/hwmon/smsc47b397.c SMSC911x ETHERNET DRIVER -M: Steve Glendinning +M: Steve Glendinning L: netdev@vger.kernel.org -S: Supported +S: Maintained F: include/linux/smsc911x.h F: drivers/net/ethernet/smsc/smsc911x.* SMSC9420 PCI ETHERNET DRIVER -M: Steve Glendinning +M: Steve Glendinning L: netdev@vger.kernel.org -S: Supported +S: Maintained F: drivers/net/ethernet/smsc/smsc9420.* SMSC UFX6000 and UFX7000 USB to VGA DRIVER -M: Steve Glendinning +M: Steve Glendinning L: linux-fbdev@vger.kernel.org -S: Supported +S: Maintained F: drivers/video/smscufx.c SN-IA64 (Itanium) SUB-PLATFORM @@ -6747,9 +6765,11 @@ F: include/linux/tifm.h TI LM49xxx FAMILY ASoC CODEC DRIVERS M: M R Swami Reddy +M: Vishwas A Deshpande L: alsa-devel@alsa-project.org (moderated for non-subscribers) S: Maintained F: sound/soc/codecs/lm49453* +F: sound/soc/codecs/isabelle* TI TWL4030 SERIES SOC CODEC DRIVER M: Peter Ujfalusi @@ -6843,10 +6863,11 @@ F: include/linux/shmem_fs.h F: mm/shmem.c TPM DEVICE DRIVER -M: Debora Velarde -M: Rajiv Andrade +M: Kent Yoder +M: Rajiv Andrade W: http://tpmdd.sourceforge.net -M: Marcel Selhorst +M: Marcel Selhorst +M: Sirrix AG W: http://www.sirrix.com L: tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers) S: Maintained @@ -6946,6 +6967,13 @@ S: Maintained F: Documentation/filesystems/ufs.txt F: fs/ufs/ +UHID USERSPACE HID IO DRIVER: +M: David Herrmann +L: linux-input@vger.kernel.org +S: Maintained +F: drivers/hid/uhid.c +F: include/linux/uhid.h + ULTRA-WIDEBAND (UWB) SUBSYSTEM: L: linux-usb@vger.kernel.org S: Orphan @@ -7206,9 +7234,9 @@ S: Supported F: drivers/usb/serial/whiteheat* USB SMSC95XX ETHERNET DRIVER -M: Steve Glendinning +M: Steve Glendinning L: netdev@vger.kernel.org -S: Supported +S: Maintained F: drivers/net/usb/smsc95xx.* USB SN9C1xx DRIVER @@ -7577,6 +7605,7 @@ W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices S: Supported F: Documentation/hwmon/wm83?? F: arch/arm/mach-s3c64xx/mach-crag6410* +F: drivers/clk/clk-wm83*.c F: drivers/leds/leds-wm83*.c F: drivers/hwmon/wm83??-hwmon.c F: drivers/input/misc/wm831x-on.c diff --git a/Makefile b/Makefile index 3fdfde2c1b7d9562e66dbb42f094be39315513ff..4bb09e1b1230d33d9328c2a67ba32aff22ebde7d 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 5 SUBLEVEL = 0 -EXTRAVERSION = -rc4 +EXTRAVERSION = NAME = Saber-toothed Squirrel # *DOCUMENTATION* diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index 1a629636cc16ae8e17ec16a973d846725eb9c807..9816d5a4d176ff938561f88eae5119145a830bf3 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -59,15 +59,13 @@ struct pci_controller *pci_isa_hose; * Quirks. */ -static void __init -quirk_isa_bridge(struct pci_dev *dev) +static void __devinit quirk_isa_bridge(struct pci_dev *dev) { dev->class = PCI_CLASS_BRIDGE_ISA << 8; } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_isa_bridge); -static void __init -quirk_cypress(struct pci_dev *dev) +static void __devinit quirk_cypress(struct pci_dev *dev) { /* The Notorious Cy82C693 chip. */ @@ -106,8 +104,7 @@ quirk_cypress(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, quirk_cypress); /* Called for each device after PCI setup is done. */ -static void __init -pcibios_fixup_final(struct pci_dev *dev) +static void __devinit pcibios_fixup_final(struct pci_dev *dev) { unsigned int class = dev->class >> 8; @@ -198,12 +195,6 @@ pcibios_init(void) subsys_initcall(pcibios_init); -char * __devinit -pcibios_setup(char *str) -{ - return str; -} - #ifdef ALPHA_RESTORE_SRM_SETUP static struct pdev_srm_saved_conf *srm_saved_configs; @@ -359,7 +350,7 @@ common_init_pci(void) hose, &resources); hose->bus = bus; hose->need_domain_info = need_domain_info; - next_busno = bus->subordinate + 1; + next_busno = bus->busn_res.end + 1; /* Don't allow 8-bit bus number overflow inside the hose - reserve some space for bridges. */ if (next_busno > 224) { diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a91009c6187062253579d0324292ade00ea2241c..b25c9d3c379a74701dddc777b7077f2a9478d0cd 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -250,16 +250,36 @@ choice prompt "ARM system type" default ARCH_VERSATILE +config ARCH_SOCFPGA + bool "Altera SOCFPGA family" + select ARCH_WANT_OPTIONAL_GPIOLIB + select ARM_AMBA + select ARM_GIC + select CACHE_L2X0 + select CLKDEV_LOOKUP + select COMMON_CLK + select CPU_V7 + select DW_APB_TIMER + select DW_APB_TIMER_OF + select GENERIC_CLOCKEVENTS + select GPIO_PL061 if GPIOLIB + select HAVE_ARM_SCU + select SPARSE_IRQ + select USE_OF + help + This enables support for Altera SOCFPGA Cyclone V platform + config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" select ARM_AMBA select ARCH_HAS_CPUFREQ - select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV + select COMMON_CLK + select CLK_VERSATILE select HAVE_TCM select ICST select GENERIC_CLOCKEVENTS select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_FPGA_IRQ select NEED_MACH_IO_H select NEED_MACH_MEMORY_H @@ -277,6 +297,7 @@ config ARCH_REALVIEW select GENERIC_CLOCKEVENTS select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB @@ -295,6 +316,7 @@ config ARCH_VERSATILE select ARCH_WANT_OPTIONAL_GPIOLIB select NEED_MACH_IO_H if PCI select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_FPGA_IRQ select ARM_TIMER_SP804 @@ -307,14 +329,16 @@ config ARCH_VEXPRESS select ARM_AMBA select ARM_TIMER_SP804 select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV + select COMMON_CLK select GENERIC_CLOCKEVENTS select HAVE_CLK select HAVE_PATA_PLATFORM select ICST select NO_IOPORT select PLAT_VERSATILE + select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD + select REGULATOR_FIXED_VOLTAGE if REGULATOR help This enables support for the ARM Ltd Versatile Express boards. @@ -349,6 +373,7 @@ config ARCH_HIGHBANK select ARM_TIMER_SP804 select CACHE_L2X0 select CLKDEV_LOOKUP + select COMMON_CLK select CPU_V7 select GENERIC_CLOCKEVENTS select HAVE_ARM_SCU @@ -389,6 +414,7 @@ config ARCH_PRIMA2 bool "CSR SiRFSoC PRIMA2 ARM Cortex A9 Platform" select CPU_V7 select NO_IOPORT + select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP select GENERIC_IRQ_CHIP @@ -447,6 +473,8 @@ config ARCH_MXC select CLKSRC_MMIO select GENERIC_IRQ_CHIP select MULTI_IRQ_HANDLER + select SPARSE_IRQ + select USE_OF help Support for Freescale MXC/iMX-based family of processors @@ -533,6 +561,18 @@ config ARCH_IXP4XX help Support for Intel's IXP4XX (XScale) family of processors. +config ARCH_MVEBU + bool "Marvell SOCs with Device Tree support" + select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER + select SPARSE_IRQ + select CLKSRC_MMIO + select GENERIC_IRQ_CHIP + select IRQ_DOMAIN + select COMMON_CLK + help + Support for the Marvell SoC Family with device tree support + config ARCH_DOVE bool "Marvell Dove" select CPU_V7 @@ -567,6 +607,7 @@ config ARCH_LPC32XX select CLKDEV_LOOKUP select GENERIC_CLOCKEVENTS select USE_OF + select HAVE_PWM help Support for the NXP LPC32XX family of processors @@ -647,6 +688,7 @@ config ARCH_TEGRA select MIGHT_HAVE_CACHE_L2X0 select NEED_MACH_IO_H if PCI select ARCH_HAS_CPUFREQ + select USE_OF help This enables support for NVIDIA Tegra based systems (Tegra APX, Tegra 6xx and Tegra 2 series). @@ -658,6 +700,7 @@ config ARCH_PICOXCELL select ARM_VIC select CPU_V6K select DW_APB_TIMER + select DW_APB_TIMER_OF select GENERIC_CLOCKEVENTS select GENERIC_GPIO select HAVE_TCM @@ -888,7 +931,7 @@ config ARCH_U300 select ARM_VIC select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP - select HAVE_MACH_CLKDEV + select COMMON_CLK select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB help @@ -913,7 +956,7 @@ config ARCH_NOMADIK select ARM_AMBA select ARM_VIC select CPU_ARM926T - select CLKDEV_LOOKUP + select COMMON_CLK select GENERIC_CLOCKEVENTS select PINCTRL select MIGHT_HAVE_CACHE_L2X0 @@ -936,6 +979,7 @@ config ARCH_DAVINCI config ARCH_OMAP bool "TI OMAP" + depends on MMU select HAVE_CLK select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ @@ -987,6 +1031,8 @@ endchoice # Kconfigs may be included either alphabetically (according to the # plat- suffix) or along side the corresponding mach-* source. # +source "arch/arm/mach-mvebu/Kconfig" + source "arch/arm/mach-at91/Kconfig" source "arch/arm/mach-bcmring/Kconfig" @@ -1021,8 +1067,6 @@ source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/mach-ks8695/Kconfig" -source "arch/arm/mach-lpc32xx/Kconfig" - source "arch/arm/mach-msm/Kconfig" source "arch/arm/mach-mv78xx0/Kconfig" @@ -1581,6 +1625,7 @@ config ARCH_NR_GPIO default 1024 if ARCH_SHMOBILE || ARCH_TEGRA default 355 if ARCH_U8500 default 264 if MACH_H4700 + default 512 if SOC_OMAP5 default 0 help Maximum number of GPIOs in the system. diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 01a134141216a1a02f5fec43defa8768ad72fa26..a03b5a7059e2d059a34d7655fc6be7fe57ba1676 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -310,6 +310,32 @@ choice The uncompressor code port configuration is now handled by CONFIG_S3C_LOWLEVEL_UART_PORT. + config DEBUG_VEXPRESS_UART0_DETECT + bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" + depends on ARCH_VEXPRESS && CPU_CP15_MMU + help + This option enables a simple heuristic which tries to determine + the motherboard's memory map variant (original or RS1) and then + choose the relevant UART0 base address. + + Note that this will only work with standard A-class core tiles, + and may fail with non-standard SMM or custom software models. + + config DEBUG_VEXPRESS_UART0_CA9 + bool "Use PL011 UART0 at 0x10009000 (V2P-CA9 core tile)" + depends on ARCH_VEXPRESS + help + This option selects UART0 at 0x10009000. Except for custom models, + this applies only to the V2P-CA9 tile. + + config DEBUG_VEXPRESS_UART0_RS1 + bool "Use PL011 UART0 at 0x1c090000 (RS1 complaint tiles)" + depends on ARCH_VEXPRESS + help + This option selects UART0 at 0x1c090000. This applies to most + of the tiles using the RS1 memory map, including all new A-class + core tiles, FPGA-based SMMs and software models. + config DEBUG_LL_UART_NONE bool "No low-level debugging UART" help diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 0298b00fe2413a1964cd899b9834136c3166136a..4d6d31115cf2df07b0df8ebe790cf51c94aa65b9 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -157,6 +157,7 @@ machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0 machine-$(CONFIG_ARCH_IMX_V4_V5) := imx machine-$(CONFIG_ARCH_IMX_V6_V7) := imx machine-$(CONFIG_ARCH_MXS) := mxs +machine-$(CONFIG_ARCH_MVEBU) := mvebu machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik machine-$(CONFIG_ARCH_OMAP1) := omap1 @@ -186,6 +187,7 @@ machine-$(CONFIG_ARCH_VEXPRESS) := vexpress machine-$(CONFIG_ARCH_VT8500) := vt8500 machine-$(CONFIG_ARCH_W90X900) := w90x900 machine-$(CONFIG_FOOTBRIDGE) := footbridge +machine-$(CONFIG_ARCH_SOCFPGA) := socfpga machine-$(CONFIG_MACH_SPEAR1310) := spear13xx machine-$(CONFIG_MACH_SPEAR1340) := spear13xx machine-$(CONFIG_MACH_SPEAR300) := spear3xx diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts new file mode 100644 index 0000000000000000000000000000000000000000..29b9f15e7599571b920285772f37c63d69f6b40d --- /dev/null +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -0,0 +1,113 @@ +/* + * aks-cdu.dts - Device Tree file for AK signal CDU + * + * Copyright (C) 2012 AK signal Brno a.s. + * 2012 Jiri Prchal + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "ge863-pro3.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs"; + }; + + ahb { + apb { + usart0: serial@fffb0000 { + status = "okay"; + }; + + usart1: serial@fffb4000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + usart2: serial@fffb8000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + usart3: serial@fffd0000 { + status = "okay"; + linux,rs485-enabled-at-boot-time; + rs485-rts-delay = <0 0>; + }; + + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 15 0>; + status = "okay"; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + bootstrap@0 { + label = "bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "uboot"; + reg = <0x40000 0x80000>; + }; + ubootenv@c0000 { + label = "ubootenv"; + reg = <0xc0000 0x40000>; + }; + kernel@100000 { + label = "kernel"; + reg = <0x100000 0x400000>; + }; + rootfs@500000 { + label = "rootfs"; + reg = <0x500000 0x7b00000>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + red { + gpios = <&pioC 10 0>; + linux,default-trigger = "none"; + }; + + green { + gpios = <&pioA 5 1>; + linux,default-trigger = "none"; + default-state = "on"; + }; + + yellow { + gpios = <&pioB 20 1>; + linux,default-trigger = "none"; + }; + + blue { + gpios = <&pioB 21 1>; + linux,default-trigger = "none"; + }; + }; +}; diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts new file mode 100644 index 0000000000000000000000000000000000000000..a9af4db7234cae6be39556547b005683b3f47ba0 --- /dev/null +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "am33xx.dtsi" + +/ { + model = "TI AM335x BeagleBone"; + compatible = "ti,am335x-bone", "ti,am33xx"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts new file mode 100644 index 0000000000000000000000000000000000000000..d6a97d9eff7289c0200b665980260397f85cc946 --- /dev/null +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "am33xx.dtsi" + +/ { + model = "TI AM335x EVM"; + compatible = "ti,am335x-evm", "ti,am33xx"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..59509c48d7e5a5c2474f73ac028f73537e0a6659 --- /dev/null +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -0,0 +1,158 @@ +/* + * Device Tree Source for AM33XX SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,am33xx"; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a8"; + }; + }; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap3-mpu"; + ti,hwmods = "mpu"; + }; + }; + + /* + * XXX: Use a flat representation of the AM33XX interconnect. + * The real AM33XX interconnect network is quite complex.Since + * that will not bring real advantage to represent that in DT + * for the moment, just use a fake OCP bus entry to represent + * the whole bus hierarchy. + */ + ocp { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main"; + + intc: interrupt-controller@48200000 { + compatible = "ti,omap2-intc"; + interrupt-controller; + #interrupt-cells = <1>; + ti,intc-size = <128>; + reg = <0x48200000 0x1000>; + }; + + gpio1: gpio@44e07000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@4804C000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@481AC000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@481AE000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart1: serial@44E09000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + }; + + uart2: serial@48022000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + }; + + uart3: serial@48024000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + }; + + uart4: serial@481A6000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + + uart5: serial@481A8000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart5"; + clock-frequency = <48000000>; + }; + + uart6: serial@481AA000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart6"; + clock-frequency = <48000000>; + }; + + i2c1: i2c@44E0B000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c1"; + }; + + i2c2: i2c@4802A000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c2"; + }; + + i2c3: i2c@4819C000 { + compatible = "ti,omap4-i2c"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "i2c3"; + }; + }; +}; diff --git a/arch/arm/boot/dts/am3517-evm.dts b/arch/arm/boot/dts/am3517-evm.dts new file mode 100644 index 0000000000000000000000000000000000000000..474f760ecadfcb2aa5a4927f1bcab14a7dfe8fa8 --- /dev/null +++ b/arch/arm/boot/dts/am3517-evm.dts @@ -0,0 +1,32 @@ +/* + * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap3.dtsi" + +/ { + model = "TI AM3517 EVM (AM3517/05)"; + compatible = "ti,am3517-evm", "ti,omap3"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x10000000>; /* 256 MB */ + }; +}; + +&i2c1 { + clock-frequency = <400000>; +}; + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; +}; diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts new file mode 100644 index 0000000000000000000000000000000000000000..fffd5c2a3041c3854ebe92ff6e0c4d05661512ce --- /dev/null +++ b/arch/arm/boot/dts/armada-370-db.dts @@ -0,0 +1,42 @@ +/* + * Device Tree file for Marvell Armada 370 evaluation board + * (DB-88F6710-BP-DDR3) + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem + * Gregory CLEMENT + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "armada-370.dtsi" + +/ { + model = "Marvell Armada 370 Evaluation Board"; + compatible = "marvell,a370-db", "marvell,armada370", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + serial@d0012000 { + clock-frequency = <200000000>; + status = "okay"; + }; + timer@d0020300 { + clock-frequency = <600000000>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..6b6b932a5a7dc291c4414ef1fc01404bfff06724 --- /dev/null +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -0,0 +1,68 @@ +/* + * Device Tree Include file for Marvell Armada 370 and Armada XP SoC + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem + * Gregory CLEMENT + * Thomas Petazzoni + * Ben Dooks + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * This file contains the definitions that are common to the Armada + * 370 and Armada XP SoC. + */ + +/include/ "skeleton.dtsi" + +/ { + model = "Marvell Armada 370 and XP SoC"; + compatible = "marvell,armada_370_xp"; + + cpus { + cpu@0 { + compatible = "marvell,sheeva-v7"; + }; + }; + + mpic: interrupt-controller@d0020000 { + compatible = "marvell,mpic"; + #interrupt-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-controller; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&mpic>; + ranges; + + serial@d0012000 { + compatible = "ns16550"; + reg = <0xd0012000 0x100>; + reg-shift = <2>; + interrupts = <41>; + status = "disabled"; + }; + serial@d0012100 { + compatible = "ns16550"; + reg = <0xd0012100 0x100>; + reg-shift = <2>; + interrupts = <42>; + status = "disabled"; + }; + + timer@d0020300 { + compatible = "marvell,armada-370-xp-timer"; + reg = <0xd0020300 0x30>; + interrupts = <37>, <38>, <39>, <40>; + }; + }; +}; + diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..3228ccc83332f4e0bbe2bb94d4ed750afcea4fa2 --- /dev/null +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -0,0 +1,35 @@ +/* + * Device Tree Include file for Marvell Armada 370 family SoC + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem + * Gregory CLEMENT + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada 370 SoC that are not + * common to all Armada SoCs. + */ + +/include/ "armada-370-xp.dtsi" + +/ { + model = "Marvell Armada 370 family SoC"; + compatible = "marvell,armada370", "marvell,armada-370-xp"; + + mpic: interrupt-controller@d0020000 { + reg = <0xd0020a00 0x1d0>, + <0xd0021870 0x58>; + }; + + soc { + system-controller@d0018200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0xd0018200 0x100>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts new file mode 100644 index 0000000000000000000000000000000000000000..f97040d4258d97bc81bd2608d8faf320eed3e37c --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -0,0 +1,50 @@ +/* + * Device Tree file for Marvell Armada XP evaluation board + * (DB-78460-BP) + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem + * Gregory CLEMENT + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP Evaluation Board"; + compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; /* 2 GB */ + }; + + soc { + serial@d0012000 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012100 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012200 { + clock-frequency = <250000000>; + status = "okay"; + }; + serial@d0012300 { + clock-frequency = <250000000>; + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..e1fa7e6edfe87e899cb7a0131458f66d1a93f740 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -0,0 +1,55 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Lior Amsalem + * Gregory CLEMENT + * Thomas Petazzoni + * Ben Dooks + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada 370 SoC that are not + * common to all Armada SoCs. + */ + +/include/ "armada-370-xp.dtsi" + +/ { + model = "Marvell Armada XP family SoC"; + compatible = "marvell,armadaxp", "marvell,armada-370-xp"; + + mpic: interrupt-controller@d0020000 { + reg = <0xd0020a00 0x1d0>, + <0xd0021870 0x58>; + }; + + soc { + serial@d0012200 { + compatible = "ns16550"; + reg = <0xd0012200 0x100>; + reg-shift = <2>; + interrupts = <43>; + status = "disabled"; + }; + serial@d0012300 { + compatible = "ns16550"; + reg = <0xd0012300 0x100>; + reg-shift = <2>; + interrupts = <44>; + status = "disabled"; + }; + + timer@d0020300 { + marvell,timer-25Mhz; + }; + + system-controller@d0018200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0xd0018200 0x500>; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index f449efc9825fd711d485b57318adf02b47e01f3e..66389c1c6f6297e50c8ae3b944d7311dcbb26b6c 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -52,10 +52,11 @@ apb { ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <29 30 31>; }; ramc0: ramc@ffffea00 { @@ -81,25 +82,25 @@ shdwc@fffffd10 { pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@fffa0000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffa0000 0x100>; - interrupts = <17 4 18 4 19 4>; + interrupts = <17 4 0 18 4 0 19 4 0>; }; tcb1: timer@fffdc000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffdc000 0x100>; - interrupts = <26 4 27 4 28 4>; + interrupts = <26 4 0 27 4 0 28 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -108,7 +109,7 @@ pioA: gpio@fffff400 { pioB: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioB: gpio@fffff600 { pioC: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,14 +127,14 @@ pioC: gpio@fffff800 { dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fffb0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb0000 0x200>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -142,7 +143,7 @@ usart0: serial@fffb0000 { usart1: serial@fffb4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb4000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -151,7 +152,7 @@ usart1: serial@fffb4000 { usart2: serial@fffb8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffb8000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -160,7 +161,7 @@ usart2: serial@fffb8000 { usart3: serial@fffd0000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd0000 0x200>; - interrupts = <23 4>; + interrupts = <23 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,7 +170,7 @@ usart3: serial@fffd0000 { usart4: serial@fffd4000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd4000 0x200>; - interrupts = <24 4>; + interrupts = <24 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -178,7 +179,7 @@ usart4: serial@fffd4000 { usart5: serial@fffd8000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffd8000 0x200>; - interrupts = <25 4>; + interrupts = <25 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -187,21 +188,21 @@ usart5: serial@fffd8000 { macb0: ethernet@fffc4000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffc4000 0x100>; - interrupts = <21 4>; + interrupts = <21 4 3>; status = "disabled"; }; usb1: gadget@fffa4000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; - interrupts = <10 4>; + interrupts = <10 4 2>; status = "disabled"; }; adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; - interrupts = <5 4>; + interrupts = <5 4 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; @@ -253,7 +254,7 @@ &pioC 14 0 usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; - interrupts = <20 4>; + interrupts = <20 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 0209913a65a2001dafea2bacda1ce741fa227872..b460d6ce9eb592da5191871b40b2d3433156bcef 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -48,10 +48,11 @@ apb { ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <30 31>; }; pmc: pmc@fffffc00 { @@ -68,13 +69,13 @@ ramc: ramc@ffffe200 { pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <19 4>; + interrupts = <19 4 0>; }; rstc@fffffd00 { @@ -90,7 +91,7 @@ shdwc@fffffd10 { pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -99,7 +100,7 @@ pioA: gpio@fffff200 { pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -108,7 +109,7 @@ pioB: gpio@fffff400 { pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioC: gpio@fffff600 { pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,7 +127,7 @@ pioD: gpio@fffff800 { pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -135,14 +136,14 @@ pioE: gpio@fffffa00 { dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -151,7 +152,7 @@ usart0: serial@fff8c000 { usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -160,7 +161,7 @@ usart1: serial@fff90000 { usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4>; + interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,14 +170,14 @@ usart2: serial@fff94000 { macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <21 4>; + interrupts = <21 4 3>; status = "disabled"; }; usb1: gadget@fff78000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfff78000 0x4000>; - interrupts = <24 4>; + interrupts = <24 4 2>; status = "disabled"; }; }; @@ -200,7 +201,7 @@ &pioD 15 0 usb0: ohci@00a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; - interrupts = <29 4>; + interrupts = <29 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 7dbccaf199f7e0844bdeb3ee8cf789d8543f0a6f..bafa8806fc17293e3bddc28aff5b4829f677c178 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -53,10 +53,11 @@ apb { ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe400 { @@ -78,7 +79,7 @@ rstc@fffffd00 { pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; @@ -90,25 +91,25 @@ shdwc@fffffd10 { tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; - interrupts = <18 4>; + interrupts = <18 4 0>; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; - interrupts = <18 4>; + interrupts = <18 4 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <21 4>; + interrupts = <21 4 0>; }; pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -117,7 +118,7 @@ pioA: gpio@fffff200 { pioB: gpio@fffff400 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -126,7 +127,7 @@ pioB: gpio@fffff400 { pioC: gpio@fffff600 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <4 4>; + interrupts = <4 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -135,7 +136,7 @@ pioC: gpio@fffff600 { pioD: gpio@fffff800 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <5 4>; + interrupts = <5 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -144,7 +145,7 @@ pioD: gpio@fffff800 { pioE: gpio@fffffa00 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <5 4>; + interrupts = <5 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -153,14 +154,14 @@ pioE: gpio@fffffa00 { dbgu: serial@ffffee00 { compatible = "atmel,at91sam9260-usart"; reg = <0xffffee00 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@fff8c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff8c000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -169,7 +170,7 @@ usart0: serial@fff8c000 { usart1: serial@fff90000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff90000 0x200>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -178,7 +179,7 @@ usart1: serial@fff90000 { usart2: serial@fff94000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff94000 0x200>; - interrupts = <9 4>; + interrupts = <9 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -187,7 +188,7 @@ usart2: serial@fff94000 { usart3: serial@fff98000 { compatible = "atmel,at91sam9260-usart"; reg = <0xfff98000 0x200>; - interrupts = <10 4>; + interrupts = <10 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -196,14 +197,14 @@ usart3: serial@fff98000 { macb0: ethernet@fffbc000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xfffbc000 0x100>; - interrupts = <25 4>; + interrupts = <25 4 3>; status = "disabled"; }; adc0: adc@fffb0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffb0000 0x100>; - interrupts = <20 4>; + interrupts = <20 4 0>; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; @@ -257,14 +258,14 @@ &pioC 14 0 usb0: ohci@00700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; usb1: ehci@00800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index cb84de791b5ab9906e66e9664fcc80b4ae314b6e..bfac0dfc332c7d10bc3fe2f87458ec728c48b885 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -50,7 +50,7 @@ apb { ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; @@ -74,7 +74,7 @@ rstc@fffffe00 { pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; shdwc@fffffe10 { @@ -85,25 +85,25 @@ shdwc@fffffe10 { tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; dma: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4>; + interrupts = <20 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -112,7 +112,7 @@ pioA: gpio@fffff400 { pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -121,7 +121,7 @@ pioB: gpio@fffff600 { pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -130,7 +130,7 @@ pioC: gpio@fffff800 { pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -139,14 +139,14 @@ pioD: gpio@fffffa00 { dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x4000>; - interrupts = <5 4>; + interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -155,7 +155,7 @@ usart0: serial@f801c000 { usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x4000>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -164,7 +164,7 @@ usart1: serial@f8020000 { usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x4000>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -173,7 +173,7 @@ usart2: serial@f8024000 { usart3: serial@f8028000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8028000 0x4000>; - interrupts = <8 4>; + interrupts = <8 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -201,7 +201,7 @@ &pioD 4 0 usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x00100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 6b3ef4339ae7030eff85882a89f04d29ea346c21..4a18c393b1360f490c9796f3c598d349338ed2f5 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -51,10 +51,11 @@ apb { ranges; aic: interrupt-controller@fffff000 { - #interrupt-cells = <2>; + #interrupt-cells = <3>; compatible = "atmel,at91rm9200-aic"; interrupt-controller; reg = <0xfffff000 0x200>; + atmel,external-irqs = <31>; }; ramc0: ramc@ffffe800 { @@ -80,37 +81,37 @@ shdwc@fffffe10 { pit: timer@fffffe30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffe30 0xf>; - interrupts = <1 4>; + interrupts = <1 4 7>; }; tcb0: timer@f8008000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf8008000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; tcb1: timer@f800c000 { compatible = "atmel,at91sam9x5-tcb"; reg = <0xf800c000 0x100>; - interrupts = <17 4>; + interrupts = <17 4 0>; }; dma0: dma-controller@ffffec00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffec00 0x200>; - interrupts = <20 4>; + interrupts = <20 4 0>; }; dma1: dma-controller@ffffee00 { compatible = "atmel,at91sam9g45-dma"; reg = <0xffffee00 0x200>; - interrupts = <21 4>; + interrupts = <21 4 0>; }; pioA: gpio@fffff400 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff400 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -119,7 +120,7 @@ pioA: gpio@fffff400 { pioB: gpio@fffff600 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff600 0x100>; - interrupts = <2 4>; + interrupts = <2 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -128,7 +129,7 @@ pioB: gpio@fffff600 { pioC: gpio@fffff800 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffff800 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -137,7 +138,7 @@ pioC: gpio@fffff800 { pioD: gpio@fffffa00 { compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio"; reg = <0xfffffa00 0x100>; - interrupts = <3 4>; + interrupts = <3 4 1>; #gpio-cells = <2>; gpio-controller; interrupt-controller; @@ -146,14 +147,14 @@ pioD: gpio@fffffa00 { dbgu: serial@fffff200 { compatible = "atmel,at91sam9260-usart"; reg = <0xfffff200 0x200>; - interrupts = <1 4>; + interrupts = <1 4 7>; status = "disabled"; }; usart0: serial@f801c000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf801c000 0x200>; - interrupts = <5 4>; + interrupts = <5 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -162,7 +163,7 @@ usart0: serial@f801c000 { usart1: serial@f8020000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8020000 0x200>; - interrupts = <6 4>; + interrupts = <6 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -171,7 +172,7 @@ usart1: serial@f8020000 { usart2: serial@f8024000 { compatible = "atmel,at91sam9260-usart"; reg = <0xf8024000 0x200>; - interrupts = <7 4>; + interrupts = <7 4 5>; atmel,use-dma-rx; atmel,use-dma-tx; status = "disabled"; @@ -180,21 +181,21 @@ usart2: serial@f8024000 { macb0: ethernet@f802c000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf802c000 0x100>; - interrupts = <24 4>; + interrupts = <24 4 3>; status = "disabled"; }; macb1: ethernet@f8030000 { compatible = "cdns,at32ap7000-macb", "cdns,macb"; reg = <0xf8030000 0x100>; - interrupts = <27 4>; + interrupts = <27 4 3>; status = "disabled"; }; adc0: adc@f804c000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; - interrupts = <19 4>; + interrupts = <19 4 0>; atmel,adc-use-external; atmel,adc-channels-used = <0xffff>; atmel,adc-vref = <3300>; @@ -248,14 +249,14 @@ &pioD 4 0 usb0: ohci@00600000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00600000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; usb1: ehci@00700000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00700000 0x100000>; - interrupts = <22 4>; + interrupts = <22 4 2>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/db8500.dtsi b/arch/arm/boot/dts/db8500.dtsi index 4ad5160018cb522922201b3dfebf9c0462b6ef85..3180a9c588b921d21ac9cea8b28e1c91b634686b 100644 --- a/arch/arm/boot/dts/db8500.dtsi +++ b/arch/arm/boot/dts/db8500.dtsi @@ -48,7 +48,7 @@ timer@a0410600 { }; rtc@80154000 { - compatible = "stericsson,db8500-rtc"; + compatible = "arm,rtc-pl031", "arm,primecell"; reg = <0x80154000 0x1000>; interrupts = <0 18 0x4>; }; @@ -60,7 +60,7 @@ gpio0: gpio@8012e000 { interrupts = <0 119 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <0>; @@ -73,7 +73,7 @@ gpio1: gpio@8012e080 { interrupts = <0 120 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <1>; @@ -86,7 +86,7 @@ gpio2: gpio@8000e000 { interrupts = <0 121 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <2>; @@ -99,7 +99,7 @@ gpio3: gpio@8000e080 { interrupts = <0 122 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <3>; @@ -112,7 +112,7 @@ gpio4: gpio@8000e100 { interrupts = <0 123 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <4>; @@ -125,7 +125,7 @@ gpio5: gpio@8000e180 { interrupts = <0 124 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <5>; @@ -138,7 +138,7 @@ gpio6: gpio@8011e000 { interrupts = <0 125 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <6>; @@ -151,7 +151,7 @@ gpio7: gpio@8011e080 { interrupts = <0 126 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <7>; @@ -164,7 +164,7 @@ gpio8: gpio@a03fe000 { interrupts = <0 127 0x4>; interrupt-controller; #interrupt-cells = <2>; - supports-sleepmode; + st,supports-sleepmode; gpio-controller; #gpio-cells = <2>; gpio-bank = <8>; @@ -206,62 +206,74 @@ db8500-prcmu-regulators { // DB8500_REGULATOR_VAPE db8500_vape_reg: db8500_vape { + regulator-compatible = "db8500_vape"; regulator-name = "db8500-vape"; regulator-always-on; }; // DB8500_REGULATOR_VARM db8500_varm_reg: db8500_varm { + regulator-compatible = "db8500_varm"; regulator-name = "db8500-varm"; }; // DB8500_REGULATOR_VMODEM db8500_vmodem_reg: db8500_vmodem { + regulator-compatible = "db8500_vmodem"; regulator-name = "db8500-vmodem"; }; // DB8500_REGULATOR_VPLL db8500_vpll_reg: db8500_vpll { + regulator-compatible = "db8500_vpll"; regulator-name = "db8500-vpll"; }; // DB8500_REGULATOR_VSMPS1 db8500_vsmps1_reg: db8500_vsmps1 { + regulator-compatible = "db8500_vsmps1"; regulator-name = "db8500-vsmps1"; }; // DB8500_REGULATOR_VSMPS2 db8500_vsmps2_reg: db8500_vsmps2 { + regulator-compatible = "db8500_vsmps2"; regulator-name = "db8500-vsmps2"; }; // DB8500_REGULATOR_VSMPS3 db8500_vsmps3_reg: db8500_vsmps3 { + regulator-compatible = "db8500_vsmps3"; regulator-name = "db8500-vsmps3"; }; // DB8500_REGULATOR_VRF1 db8500_vrf1_reg: db8500_vrf1 { + regulator-compatible = "db8500_vrf1"; regulator-name = "db8500-vrf1"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSP db8500_sva_mmdsp_reg: db8500_sva_mmdsp { + regulator-compatible = "db8500_sva_mmdsp"; regulator-name = "db8500-sva-mmdsp"; }; // DB8500_REGULATOR_SWITCH_SVAMMDSPRET db8500_sva_mmdsp_ret_reg: db8500_sva_mmdsp_ret { + regulator-compatible = "db8500_sva_mmdsp_ret"; regulator-name = "db8500-sva-mmdsp-ret"; }; // DB8500_REGULATOR_SWITCH_SVAPIPE db8500_sva_pipe_reg: db8500_sva_pipe { + regulator-compatible = "db8500_sva_pipe"; regulator-name = "db8500_sva_pipe"; }; // DB8500_REGULATOR_SWITCH_SIAMMDSP db8500_sia_mmdsp_reg: db8500_sia_mmdsp { + regulator-compatible = "db8500_sia_mmdsp"; regulator-name = "db8500_sia_mmdsp"; }; @@ -272,38 +284,45 @@ db8500_sia_mmdsp_ret_reg: db8500_sia_mmdsp_ret { // DB8500_REGULATOR_SWITCH_SIAPIPE db8500_sia_pipe_reg: db8500_sia_pipe { + regulator-compatible = "db8500_sia_pipe"; regulator-name = "db8500-sia-pipe"; }; // DB8500_REGULATOR_SWITCH_SGA db8500_sga_reg: db8500_sga { + regulator-compatible = "db8500_sga"; regulator-name = "db8500-sga"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_B2R2_MCDE db8500_b2r2_mcde_reg: db8500_b2r2_mcde { + regulator-compatible = "db8500_b2r2_mcde"; regulator-name = "db8500-b2r2-mcde"; vin-supply = <&db8500_vape_reg>; }; // DB8500_REGULATOR_SWITCH_ESRAM12 db8500_esram12_reg: db8500_esram12 { + regulator-compatible = "db8500_esram12"; regulator-name = "db8500-esram12"; }; // DB8500_REGULATOR_SWITCH_ESRAM12RET db8500_esram12_ret_reg: db8500_esram12_ret { + regulator-compatible = "db8500_esram12_ret"; regulator-name = "db8500-esram12-ret"; }; // DB8500_REGULATOR_SWITCH_ESRAM34 db8500_esram34_reg: db8500_esram34 { + regulator-compatible = "db8500_esram34"; regulator-name = "db8500-esram34"; }; // DB8500_REGULATOR_SWITCH_ESRAM34RET db8500_esram34_ret_reg: db8500_esram34_ret { + regulator-compatible = "db8500_esram34_ret"; regulator-name = "db8500-esram34-ret"; }; }; @@ -312,12 +331,70 @@ ab8500@5 { compatible = "stericsson,ab8500"; reg = <5>; /* mailbox 5 is i2c */ interrupts = <0 40 0x4>; + interrupt-controller; + #interrupt-cells = <2>; + + ab8500-rtc { + compatible = "stericsson,ab8500-rtc"; + interrupts = <17 0x4 + 18 0x4>; + interrupt-names = "60S", "ALARM"; + }; + + ab8500-gpadc { + compatible = "stericsson,ab8500-gpadc"; + interrupts = <32 0x4 + 39 0x4>; + interrupt-names = "HW_CONV_END", "SW_CONV_END"; + vddadc-supply = <&ab8500_ldo_tvout_reg>; + }; + + ab8500-usb { + compatible = "stericsson,ab8500-usb"; + interrupts = < 90 0x4 + 96 0x4 + 14 0x4 + 15 0x4 + 79 0x4 + 74 0x4 + 75 0x4>; + interrupt-names = "ID_WAKEUP_R", + "ID_WAKEUP_F", + "VBUS_DET_F", + "VBUS_DET_R", + "USB_LINK_STATUS", + "USB_ADP_PROBE_PLUG", + "USB_ADP_PROBE_UNPLUG"; + vddulpivio18-supply = <&ab8500_ldo_initcore_reg>; + v-ape-supply = <&db8500_vape_reg>; + musb_1v8-supply = <&db8500_vsmps2_reg>; + }; + + ab8500-ponkey { + compatible = "stericsson,ab8500-ponkey"; + interrupts = <6 0x4 + 7 0x4>; + interrupt-names = "ONKEY_DBF", "ONKEY_DBR"; + }; + + ab8500-sysctrl { + compatible = "stericsson,ab8500-sysctrl"; + }; + + ab8500-pwm { + compatible = "stericsson,ab8500-pwm"; + }; + + ab8500-debugfs { + compatible = "stericsson,ab8500-debug"; + }; ab8500-regulators { compatible = "stericsson,ab8500-regulator"; // supplies to the display/camera ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { + regulator-compatible = "ab8500_ldo_aux1"; regulator-name = "V-DISPLAY"; regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2900000>; @@ -328,6 +405,7 @@ ab8500_ldo_aux1_reg: ab8500_ldo_aux1 { // supplies to the on-board eMMC ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { + regulator-compatible = "ab8500_ldo_aux2"; regulator-name = "V-eMMC1"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; @@ -335,6 +413,7 @@ ab8500_ldo_aux2_reg: ab8500_ldo_aux2 { // supply for VAUX3; SDcard slots ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { + regulator-compatible = "ab8500_ldo_aux3"; regulator-name = "V-MMC-SD"; regulator-min-microvolt = <1100000>; regulator-max-microvolt = <3300000>; @@ -342,41 +421,49 @@ ab8500_ldo_aux3_reg: ab8500_ldo_aux3 { // supply for v-intcore12; VINTCORE12 LDO ab8500_ldo_initcore_reg: ab8500_ldo_initcore { + regulator-compatible = "ab8500_ldo_initcore"; regulator-name = "V-INTCORE"; }; // supply for tvout; gpadc; TVOUT LDO ab8500_ldo_tvout_reg: ab8500_ldo_tvout { + regulator-compatible = "ab8500_ldo_tvout"; regulator-name = "V-TVOUT"; }; // supply for ab8500-usb; USB LDO ab8500_ldo_usb_reg: ab8500_ldo_usb { + regulator-compatible = "ab8500_ldo_usb"; regulator-name = "dummy"; }; // supply for ab8500-vaudio; VAUDIO LDO ab8500_ldo_audio_reg: ab8500_ldo_audio { + regulator-compatible = "ab8500_ldo_audio"; regulator-name = "V-AUD"; }; // supply for v-anamic1 VAMic1-LDO ab8500_ldo_anamic1_reg: ab8500_ldo_anamic1 { + regulator-compatible = "ab8500_ldo_anamic1"; regulator-name = "V-AMIC1"; }; // supply for v-amic2; VAMIC2 LDO; reuse constants for AMIC1 ab8500_ldo_amamic2_reg: ab8500_ldo_amamic2 { + regulator-compatible = "ab8500_ldo_amamic2"; regulator-name = "V-AMIC2"; }; // supply for v-dmic; VDMIC LDO ab8500_ldo_dmic_reg: ab8500_ldo_dmic { + regulator-compatible = "ab8500_ldo_dmic"; regulator-name = "V-DMIC"; }; // supply for U8500 CSI/DSI; VANA LDO ab8500_ldo_ana_reg: ab8500_ldo_ana { + regulator-compatible = "ab8500_ldo_ana"; regulator-name = "V-CSI/DSI"; }; }; diff --git a/arch/arm/boot/dts/ea3250.dts b/arch/arm/boot/dts/ea3250.dts new file mode 100644 index 0000000000000000000000000000000000000000..d79b28d9c963b0a5ae53d217c888258c897684a2 --- /dev/null +++ b/arch/arm/boot/dts/ea3250.dts @@ -0,0 +1,174 @@ +/* + * Embedded Artists LPC3250 board + * + * Copyright 2012 Roland Stigge + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "lpc32xx.dtsi" + +/ { + model = "Embedded Artists LPC3250 board based on NXP LPC3250"; + compatible = "ea,ea3250", "nxp,lpc3250"; + #address-cells = <1>; + #size-cells = <1>; + + memory { + device_type = "memory"; + reg = <0 0x4000000>; + }; + + ahb { + mac: ethernet@31060000 { + phy-mode = "rmii"; + use-iram; + }; + + /* Here, choose exactly one from: ohci, usbd */ + ohci@31020000 { + transceiver = <&isp1301>; + status = "okay"; + }; + +/* + usbd@31020000 { + transceiver = <&isp1301>; + status = "okay"; + }; +*/ + + /* 128MB Flash via SLC NAND controller */ + slc: flash@20020000 { + status = "okay"; + #address-cells = <1>; + #size-cells = <1>; + + nxp,wdr-clks = <14>; + nxp,wwidth = <260000000>; + nxp,whold = <104000000>; + nxp,wsetup = <200000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <34666666>; + nxp,rhold = <104000000>; + nxp,rsetup = <200000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + + mtd0@00000000 { + label = "ea3250-boot"; + reg = <0x00000000 0x00080000>; + read-only; + }; + + mtd1@00080000 { + label = "ea3250-uboot"; + reg = <0x00080000 0x000c0000>; + read-only; + }; + + mtd2@00140000 { + label = "ea3250-kernel"; + reg = <0x00140000 0x00400000>; + }; + + mtd3@00540000 { + label = "ea3250-rootfs"; + reg = <0x00540000 0x07ac0000>; + }; + }; + + apb { + uart5: serial@40090000 { + status = "okay"; + }; + + uart3: serial@40080000 { + status = "okay"; + }; + + uart6: serial@40098000 { + status = "okay"; + }; + + i2c1: i2c@400A0000 { + clock-frequency = <100000>; + + eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; + + eeprom@57 { + compatible = "at,24c64"; + reg = <0x57>; + }; + + uda1380: uda1380@18 { + compatible = "nxp,uda1380"; + reg = <0x18>; + power-gpio = <&gpio 0x59 0>; + reset-gpio = <&gpio 0x51 0>; + dac-clk = "wspll"; + }; + + pca9532: pca9532@60 { + compatible = "nxp,pca9532"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x60>; + }; + }; + + i2c2: i2c@400A8000 { + clock-frequency = <100000>; + }; + + i2cusb: i2c@31020300 { + clock-frequency = <100000>; + + isp1301: usb-transceiver@2d { + compatible = "nxp,isp1301"; + reg = <0x2d>; + }; + }; + + sd@20098000 { + wp-gpios = <&pca9532 5 0>; + cd-gpios = <&pca9532 4 0>; + cd-inverted; + bus-width = <4>; + status = "okay"; + }; + }; + + fab { + uart1: serial@40014000 { + status = "okay"; + }; + + /* 3-axis accelerometer X,Y,Z (or AD-IN instead of Z) */ + adc@40048000 { + status = "okay"; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + button@21 { + label = "GPIO Key UP"; + linux,code = <103>; + gpios = <&gpio 4 1 0>; /* GPI_P3 1 */ + }; + }; +}; diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts new file mode 100644 index 0000000000000000000000000000000000000000..b7354e6506de9febf50bca6727b08912bdd75e6e --- /dev/null +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -0,0 +1,41 @@ +/* + * evk-pro3.dts - Device Tree file for Telit EVK-PRO3 with Telit GE863-PRO3 + * + * Copyright (C) 2012 Telit, + * 2012 Fabio Porcedda + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; + +/include/ "ge863-pro3.dtsi" + +/ { + model = "Telit EVK-PRO3 for Telit GE863-PRO3"; + compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@fffc4000 { + phy-mode = "rmii"; + status = "okay"; + }; + + usb1: gadget@fffa4000 { + atmel,vbus-gpio = <&pioC 5 0>; + status = "okay"; + }; + }; + + usb0: ohci@00500000 { + num-ports = <2>; + status = "okay"; + }; + }; + + i2c@0 { + status = "okay"; + }; + +}; \ No newline at end of file diff --git a/arch/arm/boot/dts/exynos4210-origen.dts b/arch/arm/boot/dts/exynos4210-origen.dts index b8c476384eef92d8ec7d44eac1d5e275a84e4de1..0c49caa099786b4c247831da4b539da7a32711ab 100644 --- a/arch/arm/boot/dts/exynos4210-origen.dts +++ b/arch/arm/boot/dts/exynos4210-origen.dts @@ -134,4 +134,16 @@ i2c@138C0000 { i2c@138D0000 { status = "disabled"; }; + + spi_0: spi@13920000 { + status = "disabled"; + }; + + spi_1: spi@13930000 { + status = "disabled"; + }; + + spi_2: spi@13940000 { + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 27afc8e535ca69618de7a10c9fabb5a35983f2a4..1beccc8f14ff948c622a6af681141221139ba021 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -179,4 +179,42 @@ i2c@138C0000 { i2c@138D0000 { status = "disabled"; }; + + spi_0: spi@13920000 { + status = "disabled"; + }; + + spi_1: spi@13930000 { + status = "disabled"; + }; + + spi_2: spi@13940000 { + gpios = <&gpc1 1 5 3 0>, + <&gpc1 3 5 3 0>, + <&gpc1 4 5 3 0>; + + w25x80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25x80"; + reg = <0>; + spi-max-frequency = <1000000>; + + controller-data { + cs-gpio = <&gpc1 2 1 0 3>; + samsung,spi-feedback-delay = <0>; + }; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0xc0000>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index a1dd2ee83753d0740c4d774dd03b556b2614f309..02891fe876e43bbbdb947aae28840baa7f9fa860 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -25,6 +25,12 @@ / { compatible = "samsung,exynos4210"; interrupt-parent = <&gic>; + aliases { + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + }; + gic:interrupt-controller@10490000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -33,6 +39,17 @@ gic:interrupt-controller@10490000 { reg = <0x10490000 0x1000>, <0x10480000 0x100>; }; + combiner:interrupt-controller@10440000 { + compatible = "samsung,exynos4210-combiner"; + #interrupt-cells = <2>; + interrupt-controller; + reg = <0x10440000 0x1000>; + interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, + <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, + <0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>, + <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>; + }; + watchdog@10060000 { compatible = "samsung,s3c2410-wdt"; reg = <0x10060000 0x100>; @@ -147,6 +164,36 @@ i2c@138D0000 { interrupts = <0 65 0>; }; + spi_0: spi@13920000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13920000 0x100>; + interrupts = <0 66 0>; + tx-dma-channel = <&pdma0 7>; /* preliminary */ + rx-dma-channel = <&pdma0 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_1: spi@13930000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13930000 0x100>; + interrupts = <0 67 0>; + tx-dma-channel = <&pdma1 7>; /* preliminary */ + rx-dma-channel = <&pdma1 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_2: spi@13940000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x13940000 0x100>; + interrupts = <0 68 0>; + tx-dma-channel = <&pdma0 9>; /* preliminary */ + rx-dma-channel = <&pdma0 8>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + amba { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index 49945cc1bc7df3795b71812c67f98c3ec88e5e72..8a5e348793c765e8caf189004f8c04848378206d 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -71,4 +71,42 @@ i2c@12CC0000 { i2c@12CD0000 { status = "disabled"; }; + + spi_0: spi@12d20000 { + status = "disabled"; + }; + + spi_1: spi@12d30000 { + gpios = <&gpa2 4 2 3 0>, + <&gpa2 6 2 3 0>, + <&gpa2 7 2 3 0>; + + w25q80bw@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "w25x80"; + reg = <0>; + spi-max-frequency = <1000000>; + + controller-data { + cs-gpio = <&gpa2 5 1 0 3>; + samsung,spi-feedback-delay = <0>; + }; + + partition@0 { + label = "U-Boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "Kernel"; + reg = <0x40000 0xc0000>; + }; + }; + }; + + spi_2: spi@12d40000 { + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 4272b2949228ba2e4ea9d7ebb7bc2285fd9bb19b..004aaa8d123cd66fed607c7c45ebc5827cd018dd 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -23,6 +23,12 @@ / { compatible = "samsung,exynos5250"; interrupt-parent = <&gic>; + aliases { + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; + }; + gic:interrupt-controller@10481000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -146,6 +152,36 @@ i2c@12CD0000 { #size-cells = <0>; }; + spi_0: spi@12d20000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d20000 0x100>; + interrupts = <0 66 0>; + tx-dma-channel = <&pdma0 5>; /* preliminary */ + rx-dma-channel = <&pdma0 4>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_1: spi@12d30000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d30000 0x100>; + interrupts = <0 67 0>; + tx-dma-channel = <&pdma1 5>; /* preliminary */ + rx-dma-channel = <&pdma1 4>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + + spi_2: spi@12d40000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d40000 0x100>; + interrupts = <0 68 0>; + tx-dma-channel = <&pdma0 7>; /* preliminary */ + rx-dma-channel = <&pdma0 6>; /* preliminary */ + #address-cells = <1>; + #size-cells = <0>; + }; + amba { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..17136fc7a516f94658052b6eea7a432430a21074 --- /dev/null +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -0,0 +1,52 @@ +/* + * ge863_pro3.dtsi - Device Tree file for Telit GE863-PRO3 + * + * Copyright (C) 2012 Telit, + * 2012 Fabio Porcedda + * + * Licensed under GPLv2 or later. + */ + +/include/ "at91sam9260.dtsi" + +/ { + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <6000000>; + }; + }; + + ahb { + apb { + dbgu: serial@fffff200 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "soft"; + nand-on-flash-bbt; + status = "okay"; + + boot@0 { + label = "boot"; + reg = <0x0 0x7c0000>; + }; + + root@07c0000 { + label = "root"; + reg = <0x7c0000 0x7840000>; + }; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200 root=ubi0:rootfs ubi.mtd=1 rootfstype=ubifs"; + }; +}; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 83e72294aefb1211c1bc3cdecab273750baa3294..2e1cfa00c25b4af5bd81f328f775471f9ed2bee9 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -1,5 +1,5 @@ /* - * Copyright 2011 Calxeda, Inc. + * Copyright 2011-2012 Calxeda, Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, @@ -24,6 +24,7 @@ / { compatible = "calxeda,highbank"; #address-cells = <1>; #size-cells = <1>; + clock-ranges; cpus { #address-cells = <1>; @@ -33,24 +34,32 @@ cpu@0 { compatible = "arm,cortex-a9"; reg = <0>; next-level-cache = <&L2>; + clocks = <&a9pll>; + clock-names = "cpu"; }; cpu@1 { compatible = "arm,cortex-a9"; reg = <1>; next-level-cache = <&L2>; + clocks = <&a9pll>; + clock-names = "cpu"; }; cpu@2 { compatible = "arm,cortex-a9"; reg = <2>; next-level-cache = <&L2>; + clocks = <&a9pll>; + clock-names = "cpu"; }; cpu@3 { compatible = "arm,cortex-a9"; reg = <3>; next-level-cache = <&L2>; + clocks = <&a9pll>; + clock-names = "cpu"; }; }; @@ -75,12 +84,14 @@ timer@fff10600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0xfff10600 0x20>; interrupts = <1 13 0xf01>; + clocks = <&a9periphclk>; }; watchdog@fff10620 { compatible = "arm,cortex-a9-twd-wdt"; reg = <0xfff10620 0x20>; interrupts = <1 14 0xf01>; + clocks = <&a9periphclk>; }; intc: interrupt-controller@fff11000 { @@ -116,12 +127,15 @@ sdhci@ffe0e000 { compatible = "calxeda,hb-sdhci"; reg = <0xffe0e000 0x1000>; interrupts = <0 90 4>; + clocks = <&eclk>; }; ipc@fff20000 { compatible = "arm,pl320", "arm,primecell"; reg = <0xfff20000 0x1000>; interrupts = <0 7 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpioe: gpio@fff30000 { @@ -130,6 +144,8 @@ gpioe: gpio@fff30000 { gpio-controller; reg = <0xfff30000 0x1000>; interrupts = <0 14 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpiof: gpio@fff31000 { @@ -138,6 +154,8 @@ gpiof: gpio@fff31000 { gpio-controller; reg = <0xfff31000 0x1000>; interrupts = <0 15 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpiog: gpio@fff32000 { @@ -146,6 +164,8 @@ gpiog: gpio@fff32000 { gpio-controller; reg = <0xfff32000 0x1000>; interrupts = <0 16 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpioh: gpio@fff33000 { @@ -154,24 +174,32 @@ gpioh: gpio@fff33000 { gpio-controller; reg = <0xfff33000 0x1000>; interrupts = <0 17 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; timer { compatible = "arm,sp804", "arm,primecell"; reg = <0xfff34000 0x1000>; interrupts = <0 18 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; rtc@fff35000 { compatible = "arm,pl031", "arm,primecell"; reg = <0xfff35000 0x1000>; interrupts = <0 19 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; serial@fff36000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xfff36000 0x1000>; interrupts = <0 20 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; smic@fff3a000 { @@ -186,12 +214,73 @@ smic@fff3a000 { sregs@fff3c000 { compatible = "calxeda,hb-sregs"; reg = <0xfff3c000 0x1000>; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + osc: oscillator { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <33333000>; + }; + + ddrpll: ddrpll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x108>; + }; + + a9pll: a9pll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x100>; + }; + + a9periphclk: a9periphclk { + #clock-cells = <0>; + compatible = "calxeda,hb-a9periph-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + + a9bclk: a9bclk { + #clock-cells = <0>; + compatible = "calxeda,hb-a9bus-clock"; + clocks = <&a9pll>; + reg = <0x104>; + }; + + emmcpll: emmcpll { + #clock-cells = <0>; + compatible = "calxeda,hb-pll-clock"; + clocks = <&osc>; + reg = <0x10C>; + }; + + eclk: eclk { + #clock-cells = <0>; + compatible = "calxeda,hb-emmc-clock"; + clocks = <&emmcpll>; + reg = <0x114>; + }; + + pclk: pclk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <150000000>; + }; + }; }; dma@fff3d000 { compatible = "arm,pl330", "arm,primecell"; reg = <0xfff3d000 0x1000>; interrupts = <0 92 4>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; ethernet@fff50000 { diff --git a/arch/arm/boot/dts/imx23-evk.dts b/arch/arm/boot/dts/imx23-evk.dts index 70bffa929b659b43ab67de96d00663475ed89a4a..e3486f486b405cfb74cb1dcbe41f808a49f5e658 100644 --- a/arch/arm/boot/dts/imx23-evk.dts +++ b/arch/arm/boot/dts/imx23-evk.dts @@ -22,17 +22,60 @@ memory { apb@80000000 { apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_pins_fixup>; + status = "okay"; + }; + ssp0: ssp@80010000 { compatible = "fsl,imx23-mmc"; pinctrl-names = "default"; - pinctrl-0 = <&mmc0_8bit_pins_a &mmc0_pins_fixup>; - bus-width = <8>; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; wp-gpios = <&gpio1 30 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1123 /* MX23_PAD_LCD_RESET__GPIO_1_18 */ + 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ + 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a>; + panel-enable-gpios = <&gpio1 18 0>; status = "okay"; }; }; apbx@80040000 { + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + + auart0: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + duart: serial@80070000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; @@ -40,4 +83,23 @@ duart: serial@80070000 { }; }; }; + + regulators { + compatible = "simple-bus"; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 0>; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; diff --git a/arch/arm/boot/dts/imx23-olinuxino.dts b/arch/arm/boot/dts/imx23-olinuxino.dts new file mode 100644 index 0000000000000000000000000000000000000000..20912b1d8893bada21336eb75c062c4a7b5db88c --- /dev/null +++ b/arch/arm/boot/dts/imx23-olinuxino.dts @@ -0,0 +1,44 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx23.dtsi" + +/ { + model = "i.MX23 Olinuxino Low Cost Board"; + compatible = "olimex,imx23-olinuxino", "fsl,imx23"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; + status = "okay"; + }; + }; + + apbx@80040000 { + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23-stmp378x_devb.dts b/arch/arm/boot/dts/imx23-stmp378x_devb.dts new file mode 100644 index 0000000000000000000000000000000000000000..757a327ff3e8a6fd50897e3217a6118a2da80631 --- /dev/null +++ b/arch/arm/boot/dts/imx23-stmp378x_devb.dts @@ -0,0 +1,78 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx23.dtsi" + +/ { + model = "Freescale STMP378x Development Board"; + compatible = "fsl,stmp378x-devb", "fsl,imx23"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx23-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_pins_fixup>; + bus-width = <4>; + wp-gpios = <&gpio1 30 0>; + vmmc-supply = <®_vddio_sd0>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11d3 /* MX23_PAD_PWM3__GPIO_1_29 */ + 0x11e3 /* MX23_PAD_PWM4__GPIO_1_30 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx@80040000 { + auart0: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + duart: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 0>; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx23.dtsi b/arch/arm/boot/dts/imx23.dtsi index 8c5f9994f3fc226265c83e3d6fe44952319b1725..a874dbfb5ae69da5d6771c75d9605ca3bbbcbcaa 100644 --- a/arch/arm/boot/dts/imx23.dtsi +++ b/arch/arm/boot/dts/imx23.dtsi @@ -18,6 +18,8 @@ aliases { gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; + serial0 = &auart0; + serial1 = &auart1; }; cpus { @@ -57,13 +59,15 @@ ecc@80008000 { status = "disabled"; }; - bch@8000a000 { - reg = <0x8000a000 2000>; - status = "disabled"; - }; - - gpmi@8000c000 { - reg = <0x8000c000 2000>; + gpmi-nand@8000c000 { + compatible = "fsl,imx23-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <13>, <56>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -114,24 +118,151 @@ gpio2: gpio@2 { duart_pins_a: duart@0 { reg = <0>; - fsl,pinmux-ids = <0x11a2 0x11b2>; + fsl,pinmux-ids = < + 0x11a2 /* MX23_PAD_PWM0__DUART_RX */ + 0x11b2 /* MX23_PAD_PWM1__DUART_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart0_pins_a: auart0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x01c0 /* MX23_PAD_AUART1_RX__AUART1_RX */ + 0x01d0 /* MX23_PAD_AUART1_TX__AUART1_TX */ + 0x01a0 /* MX23_PAD_AUART1_CTS__AUART1_CTS */ + 0x01b0 /* MX23_PAD_AUART1_RTS__AUART1_RTS */ + >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; }; + gpmi_pins_a: gpmi-nand@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0000 /* MX23_PAD_GPMI_D00__GPMI_D00 */ + 0x0010 /* MX23_PAD_GPMI_D01__GPMI_D01 */ + 0x0020 /* MX23_PAD_GPMI_D02__GPMI_D02 */ + 0x0030 /* MX23_PAD_GPMI_D03__GPMI_D03 */ + 0x0040 /* MX23_PAD_GPMI_D04__GPMI_D04 */ + 0x0050 /* MX23_PAD_GPMI_D05__GPMI_D05 */ + 0x0060 /* MX23_PAD_GPMI_D06__GPMI_D06 */ + 0x0070 /* MX23_PAD_GPMI_D07__GPMI_D07 */ + 0x0100 /* MX23_PAD_GPMI_CLE__GPMI_CLE */ + 0x0110 /* MX23_PAD_GPMI_ALE__GPMI_ALE */ + 0x0130 /* MX23_PAD_GPMI_RDY0__GPMI_RDY0 */ + 0x0140 /* MX23_PAD_GPMI_RDY1__GPMI_RDY1 */ + 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */ + 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */ + 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */ + 0x21b0 /* MX23_PAD_GPMI_CE1N__GPMI_CE1N */ + 0x21c0 /* MX23_PAD_GPMI_CE0N__GPMI_CE0N */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_pins_fixup: gpmi-pins-fixup { + fsl,pinmux-ids = < + 0x0170 /* MX23_PAD_GPMI_WPN__GPMI_WPN */ + 0x0180 /* MX23_PAD_GPMI_WRN__GPMI_WRN */ + 0x0190 /* MX23_PAD_GPMI_RDN__GPMI_RDN */ + >; + fsl,drive-strength = <2>; + }; + + mmc0_4bit_pins_a: mmc0-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */ + 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */ + 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ + 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ + 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ + 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; - fsl,pinmux-ids = <0x2020 0x2030 0x2040 - 0x2050 0x0082 0x0092 0x00a2 - 0x00b2 0x2000 0x2010 0x2060>; + fsl,pinmux-ids = < + 0x2020 /* MX23_PAD_SSP1_DATA0__SSP1_DATA0 */ + 0x2030 /* MX23_PAD_SSP1_DATA1__SSP1_DATA1 */ + 0x2040 /* MX23_PAD_SSP1_DATA2__SSP1_DATA2 */ + 0x2050 /* MX23_PAD_SSP1_DATA3__SSP1_DATA3 */ + 0x0082 /* MX23_PAD_GPMI_D08__SSP1_DATA4 */ + 0x0092 /* MX23_PAD_GPMI_D09__SSP1_DATA5 */ + 0x00a2 /* MX23_PAD_GPMI_D10__SSP1_DATA6 */ + 0x00b2 /* MX23_PAD_GPMI_D11__SSP1_DATA7 */ + 0x2000 /* MX23_PAD_SSP1_CMD__SSP1_CMD */ + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ + 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; }; mmc0_pins_fixup: mmc0-pins-fixup { - fsl,pinmux-ids = <0x2010 0x2060>; + fsl,pinmux-ids = < + 0x2010 /* MX23_PAD_SSP1_DETECT__SSP1_DETECT */ + 0x2060 /* MX23_PAD_SSP1_SCK__SSP1_SCK */ + >; + fsl,pull-up = <0>; + }; + + pwm2_pins_a: pwm2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11c0 /* MX23_PAD_PWM2__PWM2 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_24bit_pins_a: lcdif-24bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX23_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX23_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX23_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX23_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX23_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX23_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX23_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX23_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX23_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX23_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX23_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX23_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX23_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX23_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX23_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX23_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX23_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX23_PAD_LCD_D17__LCD_D17 */ + 0x0081 /* MX23_PAD_GPMI_D08__LCD_D18 */ + 0x0091 /* MX23_PAD_GPMI_D09__LCD_D19 */ + 0x00a1 /* MX23_PAD_GPMI_D10__LCD_D20 */ + 0x00b1 /* MX23_PAD_GPMI_D11__LCD_D21 */ + 0x00c1 /* MX23_PAD_GPMI_D12__LCD_D22 */ + 0x00d1 /* MX23_PAD_GPMI_D13__LCD_D23 */ + 0x1160 /* MX23_PAD_LCD_DOTCK__LCD_DOTCK */ + 0x1170 /* MX23_PAD_LCD_ENABLE__LCD_ENABLE */ + 0x1180 /* MX23_PAD_LCD_HSYNC__LCD_HSYNC */ + 0x1190 /* MX23_PAD_LCD_VSYNC__LCD_VSYNC */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; fsl,pull-up = <0>; }; }; @@ -172,7 +303,9 @@ axi-ahb@8002e000 { }; lcdif@80030000 { + compatible = "fsl,imx23-lcdif"; reg = <0x80030000 2000>; + interrupts = <46 45>; status = "disabled"; }; @@ -242,12 +375,16 @@ i2c@80058000 { }; rtc@8005c000 { + compatible = "fsl,imx23-rtc", "fsl,stmp3xxx-rtc"; reg = <0x8005c000 2000>; - status = "disabled"; + interrupts = <22>; }; - pwm@80064000 { + pwm: pwm@80064000 { + compatible = "fsl,imx23-pwm"; reg = <0x80064000 2000>; + #pwm-cells = <2>; + fsl,pwm-number = <5>; status = "disabled"; }; @@ -257,12 +394,16 @@ timrot@80068000 { }; auart0: serial@8006c000 { + compatible = "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; + interrupts = <24 25 23>; status = "disabled"; }; auart1: serial@8006e000 { + compatible = "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; + interrupts = <59 60 58>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx27-3ds.dts b/arch/arm/boot/dts/imx27-3ds.dts new file mode 100644 index 0000000000000000000000000000000000000000..d3f8296e19e0828ea1bd94e88ef04a9467327e21 --- /dev/null +++ b/arch/arm/boot/dts/imx27-3ds.dts @@ -0,0 +1,41 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx27.dtsi" + +/ { + model = "mx27_3ds"; + compatible = "freescale,imx27-3ds", "fsl,imx27"; + + memory { + reg = <0x0 0x0>; + }; + + soc { + aipi@10000000 { /* aipi */ + + wdog@10002000 { + status = "okay"; + }; + + uart@1000a000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + + fec@1002b000 { + status = "okay"; + }; + }; + }; + +}; diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index 386c769c38d179dcb090bba33af5aeb6ec2f0a0a..00bae3aad5ab601f7a21adf4da8539aa48880781 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -121,7 +121,7 @@ gpio1: gpio@10015000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@10015100 { @@ -131,7 +131,7 @@ gpio2: gpio@10015100 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@10015200 { @@ -141,7 +141,7 @@ gpio3: gpio@10015200 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@10015300 { @@ -151,7 +151,7 @@ gpio4: gpio@10015300 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@10015400 { @@ -161,7 +161,7 @@ gpio5: gpio@10015400 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@10015500 { @@ -171,7 +171,7 @@ gpio6: gpio@10015500 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; cspi3: cspi@10017000 { diff --git a/arch/arm/boot/dts/imx28-apx4devkit.dts b/arch/arm/boot/dts/imx28-apx4devkit.dts new file mode 100644 index 0000000000000000000000000000000000000000..b383417a558f4b07ee55e85157d44ebc180c7bf7 --- /dev/null +++ b/arch/arm/boot/dts/imx28-apx4devkit.dts @@ -0,0 +1,198 @@ +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Bluegiga APX4 Development Kit"; + compatible = "bluegiga,apx4devkit", "fsl,imx28"; + + memory { + reg = <0x40000000 0x04000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + }; + + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + + ssp2: ssp@80014000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_4bit_pins_apx4 &mmc2_sck_cfg_apx4>; + bus-width = <4>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0113 /* MX28_PAD_GPMI_CE1N__GPIO_0_17 */ + 0x0153 /* MX28_PAD_GPMI_RDY1__GPIO_0_21 */ + 0x2123 /* MX28_PAD_SSP2_MISO__GPIO_2_18 */ + 0x2131 /* MX28_PAD_SSP2_SS0__GPIO_2_19 */ + 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + 0x4143 /* MX28_PAD_JTAG_RTCK__GPIO_4_20 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_apx4: lcdif-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + mmc2_4bit_pins_apx4: mmc2-4bit-apx4@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2041 /* MX28_PAD_SSP0_DATA4__SSP2_D0 */ + 0x2051 /* MX28_PAD_SSP0_DATA5__SSP2_D3 */ + 0x2061 /* MX28_PAD_SSP0_DATA6__SSP2_CMD */ + 0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */ + 0x2141 /* MX28_PAD_SSP2_SS1__SSP2_D1 */ + 0x2151 /* MX28_PAD_SSP2_SS2__SSP2_D2 */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc2_sck_cfg_apx4: mmc2-sck-cfg-apx4 { + fsl,pinmux-ids = < + 0x2071 /* MX28_PAD_SSP0_DATA7__SSP2_SCK */ + >; + fsl,drive-strength = <2>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_apx4>; + status = "okay"; + }; + }; + + apbx@80040000 { + saif0: saif@80042000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; + }; + + saif1: saif@80046000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + + }; + + pcf8563: rtc@51 { + compatible = "phg,pcf8563"; + reg = <0x51>; + }; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + auart1: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_2pins_a>; + status = "okay"; + }; + + auart2: serial@8006e000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart2_2pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + sound { + compatible = "bluegiga,apx4devkit-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "apx4devkit-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio3 28 0>; + linux,default-trigger = "heartbeat"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts new file mode 100644 index 0000000000000000000000000000000000000000..c03a577beca3845af06b4613abcdafa785555d5a --- /dev/null +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -0,0 +1,52 @@ +/* + * Copyright 2012 Free Electrons + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Crystalfontz CFA-10036 Board"; + compatible = "crystalfontz,cfa10036", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + }; + + apbx@80040000 { + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_b>; + status = "okay"; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + + power { + gpios = <&gpio3 4 1>; + default-state = "on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-evk.dts b/arch/arm/boot/dts/imx28-evk.dts index ee520a529cb4a6406385b72a3717d00c8c791fbf..773c0e84d1fb54cb1724c03e0101b0053d483bee 100644 --- a/arch/arm/boot/dts/imx28-evk.dts +++ b/arch/arm/boot/dts/imx28-evk.dts @@ -22,6 +22,13 @@ memory { apb@80000000 { apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg + &gpmi_pins_evk>; + status = "okay"; + }; + ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; @@ -29,6 +36,7 @@ ssp0: ssp@80010000 { &mmc0_cd_cfg &mmc0_sck_cfg>; bus-width = <8>; wp-gpios = <&gpio2 12 0>; + vmmc-supply = <®_vddio_sd0>; status = "okay"; }; @@ -36,6 +44,72 @@ ssp1: ssp@80012000 { compatible = "fsl,imx28-mmc"; bus-width = <8>; wp-gpios = <&gpio0 28 0>; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x20d3 /* MX28_PAD_SSP1_CMD__GPIO_2_13 */ + 0x20f3 /* MX28_PAD_SSP1_DATA3__GPIO_2_15 */ + 0x40d3 /* MX28_PAD_ENET0_RX_CLK__GPIO_4_13 */ + 0x20c3 /* MX28_PAD_SSP1_SCK__GPIO_2_12 */ + 0x31c3 /* MX28_PAD_PWM3__GPIO_3_28 */ + 0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */ + 0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */ + 0x3083 /* MX28_PAD_AUART2_RX__GPIO_3_8 */ + 0x3093 /* MX28_PAD_AUART2_TX__GPIO_3_9 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_pins_evk: gpmi-nand-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0110 /* MX28_PAD_GPMI_CE1N__GPMI_CE1N */ + 0x0150 /* MX28_PAD_GPMI_RDY1__GPMI_READY1 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_evk: lcdif-evk@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */ + 0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */ + 0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */ + 0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_evk>; + panel-enable-gpios = <&gpio3 30 0>; + status = "okay"; + }; + + can0: can@80032000 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; + }; + + can1: can@80034000 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; status = "okay"; }; }; @@ -68,19 +142,58 @@ sgtl5000: codec@0a { }; }; + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_pins_a>; + status = "okay"; + }; + duart: serial@80074000 { pinctrl-names = "default"; pinctrl-0 = <&duart_pins_a>; status = "okay"; }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_pins_a>; + status = "okay"; + }; + + auart3: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; + }; + + usbphy0: usbphy@8007c000 { + status = "okay"; + }; + + usbphy1: usbphy@8007e000 { + status = "okay"; + }; }; }; ahb@80080000 { + usb0: usb@80080000 { + vbus-supply = <®_usb0_vbus>; + status = "okay"; + }; + + usb1: usb@80090000 { + vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + mac0: ethernet@800f0000 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&mac0_pins_a>; + phy-supply = <®_fec_3v3>; + phy-reset-gpios = <&gpio4 13 0>; + phy-reset-duration = <100>; status = "okay"; }; @@ -102,6 +215,40 @@ reg_3p3v: 3p3v { regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; + + reg_fec_3v3: fec-3v3 { + compatible = "regulator-fixed"; + regulator-name = "fec-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio2 15 0>; + }; + + reg_usb0_vbus: usb0_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb0_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 9 0>; + enable-active-high; + }; + + reg_usb1_vbus: usb1_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 8 0>; + enable-active-high; + }; }; sound { @@ -111,4 +258,21 @@ sound { saif-controllers = <&saif0 &saif1>; audio-codec = <&sgtl5000>; }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio3 5 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 2 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; }; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts new file mode 100644 index 0000000000000000000000000000000000000000..183a3fd2d859cdd680511e196e6b9c0af625a287 --- /dev/null +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -0,0 +1,210 @@ +/* + * Copyright (C) 2012 Marek Vasut + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "DENX M28EVK"; + compatible = "denx,m28evk", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x00300000>; + read-only; + }; + + partition@1 { + label = "environment"; + reg = <0x00300000 0x00080000>; + }; + + partition@2 { + label = "redundant-environment"; + reg = <0x00380000 0x00080000>; + }; + + partition@3 { + label = "kernel"; + reg = <0x00400000 0x00400000>; + }; + + partition@4 { + label = "filesystem"; + reg = <0x00800000 0x0f800000>; + }; + }; + + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_8bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <8>; + wp-gpios = <&gpio3 10 1>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x30a3 /* MX28_PAD_AUART2_CTS__GPIO_3_10 */ + 0x30b3 /* MX28_PAD_AUART2_RTS__GPIO_3_11 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_pins_m28: lcdif-m28@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x11e0 /* MX28_PAD_LCD_DOTCLK__LCD_DOTCLK */ + 0x11f0 /* MX28_PAD_LCD_ENABLE__LCD_ENABLE */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + + lcdif@80030000 { + pinctrl-names = "default"; + pinctrl-0 = <&lcdif_24bit_pins_a + &lcdif_pins_m28>; + status = "okay"; + }; + + can0: can@80032000 { + pinctrl-names = "default"; + pinctrl-0 = <&can0_pins_a>; + status = "okay"; + }; + + can1: can@80034000 { + pinctrl-names = "default"; + pinctrl-0 = <&can1_pins_a>; + status = "okay"; + }; + }; + + apbx@80040000 { + saif0: saif@80042000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif0_pins_a>; + status = "okay"; + }; + + saif1: saif@80046000 { + pinctrl-names = "default"; + pinctrl-0 = <&saif1_pins_a>; + fsl,saif-master = <&saif0>; + status = "okay"; + }; + + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + sgtl5000: codec@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + + }; + + eeprom: eeprom@51 { + compatible = "atmel,24c128"; + reg = <0x51>; + pagesize = <32>; + }; + + rtc: rtc@68 { + compatible = "stm,mt41t62"; + reg = <0x68>; + }; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_pins_a>; + status = "okay"; + }; + + auart0: serial@8006a000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart0_2pins_a>; + status = "okay"; + }; + + auart3: serial@80070000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart3_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + phy-reset-gpios = <&gpio3 11 0>; + status = "okay"; + }; + + mac1: ethernet@800f4000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac1_pins_a>; + status = "okay"; + }; + }; + + regulators { + compatible = "simple-bus"; + + reg_3p3v: 3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + + sound { + compatible = "denx,m28evk-sgtl5000", + "fsl,mxs-audio-sgtl5000"; + model = "m28evk-sgtl5000"; + saif-controllers = <&saif0 &saif1>; + audio-codec = <&sgtl5000>; + }; +}; diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts new file mode 100644 index 0000000000000000000000000000000000000000..62bf767409a6f96a1c3641324f1d40c167e21aab --- /dev/null +++ b/arch/arm/boot/dts/imx28-tx28.dts @@ -0,0 +1,97 @@ +/dts-v1/; +/include/ "imx28.dtsi" + +/ { + model = "Ka-Ro electronics TX28 module"; + compatible = "karo,tx28", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + ssp0: ssp@80010000 { + compatible = "fsl,imx28-mmc"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_4bit_pins_a + &mmc0_cd_cfg + &mmc0_sck_cfg>; + bus-width = <4>; + status = "okay"; + }; + + pinctrl@80018000 { + pinctrl-names = "default"; + pinctrl-0 = <&hog_pins_a>; + + hog_pins_a: hog-gpios@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x40a3 /* MX28_PAD_ENET0_RXD3__GPIO_4_10 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; + }; + + apbx@80040000 { + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + ds1339: rtc@68 { + compatible = "mxim,ds1339"; + reg = <0x68>; + }; + }; + + pwm: pwm@80064000 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pins_a>; + status = "okay"; + }; + + duart: serial@80074000 { + pinctrl-names = "default"; + pinctrl-0 = <&duart_4pins_a>; + status = "okay"; + }; + + auart1: serial@8006c000 { + pinctrl-names = "default"; + pinctrl-0 = <&auart1_pins_a>; + status = "okay"; + }; + }; + }; + + ahb@80080000 { + mac0: ethernet@800f0000 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&mac0_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + + user { + label = "Heartbeat"; + gpios = <&gpio4 10 0>; + linux,default-trigger = "heartbeat"; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; +}; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 4634cb861a597d115b5f6dab784da3a616c81b01..915db89e364431450347e69e93c9e73bb6b59108 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -22,6 +22,11 @@ aliases { gpio4 = &gpio4; saif0 = &saif0; saif1 = &saif1; + serial0 = &auart0; + serial1 = &auart1; + serial2 = &auart2; + serial3 = &auart3; + serial4 = &auart4; }; cpus { @@ -68,15 +73,15 @@ perfmon@80006000 { status = "disabled"; }; - bch@8000a000 { - reg = <0x8000a000 2000>; - interrupts = <41>; - status = "disabled"; - }; - - gpmi@8000c000 { - reg = <0x8000c000 2000>; - interrupts = <42 88>; + gpmi-nand@8000c000 { + compatible = "fsl,imx28-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x8000c000 2000>, <0x8000a000 2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <88>, <41>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <4>; status = "disabled"; }; @@ -161,7 +166,150 @@ gpio4: gpio@4 { duart_pins_a: duart@0 { reg = <0>; - fsl,pinmux-ids = <0x3102 0x3112>; + fsl,pinmux-ids = < + 0x3102 /* MX28_PAD_PWM0__DUART_RX */ + 0x3112 /* MX28_PAD_PWM1__DUART_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + duart_pins_b: duart@1 { + reg = <1>; + fsl,pinmux-ids = < + 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ + 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + duart_4pins_a: duart-4pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3022 /* MX28_PAD_AUART0_CTS__DUART_RX */ + 0x3032 /* MX28_PAD_AUART0_RTS__DUART_TX */ + 0x3002 /* MX28_PAD_AUART0_RX__DUART_CTS */ + 0x3012 /* MX28_PAD_AUART0_TX__DUART_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_pins_a: gpmi-nand@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0000 /* MX28_PAD_GPMI_D00__GPMI_D0 */ + 0x0010 /* MX28_PAD_GPMI_D01__GPMI_D1 */ + 0x0020 /* MX28_PAD_GPMI_D02__GPMI_D2 */ + 0x0030 /* MX28_PAD_GPMI_D03__GPMI_D3 */ + 0x0040 /* MX28_PAD_GPMI_D04__GPMI_D4 */ + 0x0050 /* MX28_PAD_GPMI_D05__GPMI_D5 */ + 0x0060 /* MX28_PAD_GPMI_D06__GPMI_D6 */ + 0x0070 /* MX28_PAD_GPMI_D07__GPMI_D7 */ + 0x0100 /* MX28_PAD_GPMI_CE0N__GPMI_CE0N */ + 0x0140 /* MX28_PAD_GPMI_RDY0__GPMI_READY0 */ + 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ + 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ + 0x01a0 /* MX28_PAD_GPMI_ALE__GPMI_ALE */ + 0x01b0 /* MX28_PAD_GPMI_CLE__GPMI_CLE */ + 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + gpmi_status_cfg: gpmi-status-cfg { + fsl,pinmux-ids = < + 0x0180 /* MX28_PAD_GPMI_RDN__GPMI_RDN */ + 0x0190 /* MX28_PAD_GPMI_WRN__GPMI_WRN */ + 0x01c0 /* MX28_PAD_GPMI_RESETN__GPMI_RESETN */ + >; + fsl,drive-strength = <2>; + }; + + auart0_pins_a: auart0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ + 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ + 0x3020 /* MX28_PAD_AUART0_CTS__AUART0_CTS */ + 0x3030 /* MX28_PAD_AUART0_RTS__AUART0_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart0_2pins_a: auart0-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3000 /* MX28_PAD_AUART0_RX__AUART0_RX */ + 0x3010 /* MX28_PAD_AUART0_TX__AUART0_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart1_pins_a: auart1@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ + 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ + 0x3060 /* MX28_PAD_AUART1_CTS__AUART1_CTS */ + 0x3070 /* MX28_PAD_AUART1_RTS__AUART1_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart1_2pins_a: auart1-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3040 /* MX28_PAD_AUART1_RX__AUART1_RX */ + 0x3050 /* MX28_PAD_AUART1_TX__AUART1_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart2_2pins_a: auart2-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2101 /* MX28_PAD_SSP2_SCK__AUART2_RX */ + 0x2111 /* MX28_PAD_SSP2_MOSI__AUART2_TX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart3_pins_a: auart3@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x30c0 /* MX28_PAD_AUART3_RX__AUART3_RX */ + 0x30d0 /* MX28_PAD_AUART3_TX__AUART3_TX */ + 0x30e0 /* MX28_PAD_AUART3_CTS__AUART3_CTS */ + 0x30f0 /* MX28_PAD_AUART3_RTS__AUART3_RTS */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + auart3_2pins_a: auart3-2pins@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2121 /* MX28_PAD_SSP2_MISO__AUART3_RX */ + 0x2131 /* MX28_PAD_SSP2_SS0__AUART3_TX */ + >; fsl,drive-strength = <0>; fsl,voltage = <1>; fsl,pull-up = <0>; @@ -169,9 +317,17 @@ duart_pins_a: duart@0 { mac0_pins_a: mac0@0 { reg = <0>; - fsl,pinmux-ids = <0x4000 0x4010 0x4020 - 0x4030 0x4040 0x4060 0x4070 - 0x4080 0x4100>; + fsl,pinmux-ids = < + 0x4000 /* MX28_PAD_ENET0_MDC__ENET0_MDC */ + 0x4010 /* MX28_PAD_ENET0_MDIO__ENET0_MDIO */ + 0x4020 /* MX28_PAD_ENET0_RX_EN__ENET0_RX_EN */ + 0x4030 /* MX28_PAD_ENET0_RXD0__ENET0_RXD0 */ + 0x4040 /* MX28_PAD_ENET0_RXD1__ENET0_RXD1 */ + 0x4060 /* MX28_PAD_ENET0_TX_EN__ENET0_TX_EN */ + 0x4070 /* MX28_PAD_ENET0_TXD0__ENET0_TXD0 */ + 0x4080 /* MX28_PAD_ENET0_TXD1__ENET0_TXD1 */ + 0x4100 /* MX28_PAD_ENET_CLK__CLKCTRL_ENET */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -179,8 +335,14 @@ mac0_pins_a: mac0@0 { mac1_pins_a: mac1@0 { reg = <0>; - fsl,pinmux-ids = <0x40f1 0x4091 0x40a1 - 0x40e1 0x40b1 0x40c1>; + fsl,pinmux-ids = < + 0x40f1 /* MX28_PAD_ENET0_CRS__ENET1_RX_EN */ + 0x4091 /* MX28_PAD_ENET0_RXD2__ENET1_RXD0 */ + 0x40a1 /* MX28_PAD_ENET0_RXD3__ENET1_RXD1 */ + 0x40e1 /* MX28_PAD_ENET0_COL__ENET1_TX_EN */ + 0x40b1 /* MX28_PAD_ENET0_TXD2__ENET1_TXD0 */ + 0x40c1 /* MX28_PAD_ENET0_TXD3__ENET1_TXD1 */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -188,28 +350,61 @@ mac1_pins_a: mac1@0 { mmc0_8bit_pins_a: mmc0-8bit@0 { reg = <0>; - fsl,pinmux-ids = <0x2000 0x2010 0x2020 - 0x2030 0x2040 0x2050 0x2060 - 0x2070 0x2080 0x2090 0x20a0>; + fsl,pinmux-ids = < + 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ + 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ + 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ + 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ + 0x2040 /* MX28_PAD_SSP0_DATA4__SSP0_D4 */ + 0x2050 /* MX28_PAD_SSP0_DATA5__SSP0_D5 */ + 0x2060 /* MX28_PAD_SSP0_DATA6__SSP0_D6 */ + 0x2070 /* MX28_PAD_SSP0_DATA7__SSP0_D7 */ + 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ + 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ + 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + >; + fsl,drive-strength = <1>; + fsl,voltage = <1>; + fsl,pull-up = <1>; + }; + + mmc0_4bit_pins_a: mmc0-4bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x2000 /* MX28_PAD_SSP0_DATA0__SSP0_D0 */ + 0x2010 /* MX28_PAD_SSP0_DATA1__SSP0_D1 */ + 0x2020 /* MX28_PAD_SSP0_DATA2__SSP0_D2 */ + 0x2030 /* MX28_PAD_SSP0_DATA3__SSP0_D3 */ + 0x2080 /* MX28_PAD_SSP0_CMD__SSP0_CMD */ + 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ + 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; }; mmc0_cd_cfg: mmc0-cd-cfg { - fsl,pinmux-ids = <0x2090>; + fsl,pinmux-ids = < + 0x2090 /* MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT */ + >; fsl,pull-up = <0>; }; mmc0_sck_cfg: mmc0-sck-cfg { - fsl,pinmux-ids = <0x20a0>; + fsl,pinmux-ids = < + 0x20a0 /* MX28_PAD_SSP0_SCK__SSP0_SCK */ + >; fsl,drive-strength = <2>; fsl,pull-up = <0>; }; i2c0_pins_a: i2c0@0 { reg = <0>; - fsl,pinmux-ids = <0x3180 0x3190>; + fsl,pinmux-ids = < + 0x3180 /* MX28_PAD_I2C0_SCL__I2C0_SCL */ + 0x3190 /* MX28_PAD_I2C0_SDA__I2C0_SDA */ + >; fsl,drive-strength = <1>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -217,8 +412,12 @@ i2c0_pins_a: i2c0@0 { saif0_pins_a: saif0@0 { reg = <0>; - fsl,pinmux-ids = - <0x3140 0x3150 0x3160 0x3170>; + fsl,pinmux-ids = < + 0x3140 /* MX28_PAD_SAIF0_MCLK__SAIF0_MCLK */ + 0x3150 /* MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK */ + 0x3160 /* MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK */ + 0x3170 /* MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0 */ + >; fsl,drive-strength = <2>; fsl,voltage = <1>; fsl,pull-up = <1>; @@ -226,11 +425,88 @@ saif0_pins_a: saif0@0 { saif1_pins_a: saif1@0 { reg = <0>; - fsl,pinmux-ids = <0x31a0>; + fsl,pinmux-ids = < + 0x31a0 /* MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0 */ + >; fsl,drive-strength = <2>; fsl,voltage = <1>; fsl,pull-up = <1>; }; + + pwm0_pins_a: pwm0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3100 /* MX28_PAD_PWM0__PWM_0 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + pwm2_pins_a: pwm2@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x3120 /* MX28_PAD_PWM2__PWM_2 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + lcdif_24bit_pins_a: lcdif-24bit@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */ + 0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */ + 0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */ + 0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */ + 0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */ + 0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */ + 0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */ + 0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */ + 0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */ + 0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */ + 0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */ + 0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */ + 0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */ + 0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */ + 0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */ + 0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */ + 0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */ + 0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */ + 0x1120 /* MX28_PAD_LCD_D18__LCD_D18 */ + 0x1130 /* MX28_PAD_LCD_D19__LCD_D19 */ + 0x1140 /* MX28_PAD_LCD_D20__LCD_D20 */ + 0x1150 /* MX28_PAD_LCD_D21__LCD_D21 */ + 0x1160 /* MX28_PAD_LCD_D22__LCD_D22 */ + 0x1170 /* MX28_PAD_LCD_D23__LCD_D23 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + can0_pins_a: can0@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0161 /* MX28_PAD_GPMI_RDY2__CAN0_TX */ + 0x0171 /* MX28_PAD_GPMI_RDY3__CAN0_RX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + + can1_pins_a: can1@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x0121 /* MX28_PAD_GPMI_CE2N__CAN1_TX */ + 0x0131 /* MX28_PAD_GPMI_CE3N__CAN1_RX */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; }; digctl@8001c000 { @@ -272,18 +548,21 @@ axi-ahb@8002e000 { }; lcdif@80030000 { + compatible = "fsl,imx28-lcdif"; reg = <0x80030000 2000>; interrupts = <38 86>; status = "disabled"; }; can0: can@80032000 { + compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80032000 2000>; interrupts = <8>; status = "disabled"; }; can1: can@80034000 { + compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan"; reg = <0x80034000 2000>; interrupts = <9>; status = "disabled"; @@ -370,9 +649,9 @@ spdif@80054000 { }; rtc@80056000 { + compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc"; reg = <0x80056000 2000>; - interrupts = <28 29>; - status = "disabled"; + interrupts = <29>; }; i2c0: i2c@80058000 { @@ -393,8 +672,11 @@ i2c1: i2c@8005a000 { status = "disabled"; }; - pwm@80064000 { + pwm: pwm@80064000 { + compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; reg = <0x80064000 2000>; + #pwm-cells = <2>; + fsl,pwm-number = <8>; status = "disabled"; }; @@ -404,30 +686,35 @@ timrot@80068000 { }; auart0: serial@8006a000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006a000 0x2000>; interrupts = <112 70 71>; status = "disabled"; }; auart1: serial@8006c000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006c000 0x2000>; interrupts = <113 72 73>; status = "disabled"; }; auart2: serial@8006e000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x8006e000 0x2000>; interrupts = <114 74 75>; status = "disabled"; }; auart3: serial@80070000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80070000 0x2000>; interrupts = <115 76 77>; status = "disabled"; }; auart4: serial@80072000 { + compatible = "fsl,imx28-auart", "fsl,imx23-auart"; reg = <0x80072000 0x2000>; interrupts = <116 78 79>; status = "disabled"; @@ -441,11 +728,13 @@ duart: serial@80074000 { }; usbphy0: usbphy@8007c000 { + compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007c000 0x2000>; status = "disabled"; }; usbphy1: usbphy@8007e000 { + compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy"; reg = <0x8007e000 0x2000>; status = "disabled"; }; @@ -459,13 +748,19 @@ ahb@80080000 { reg = <0x80080000 0x80000>; ranges; - usbctrl0: usbctrl@80080000 { + usb0: usb@80080000 { + compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80080000 0x10000>; + interrupts = <93>; + fsl,usbphy = <&usbphy0>; status = "disabled"; }; - usbctrl1: usbctrl@80090000 { + usb1: usb@80090000 { + compatible = "fsl,imx28-usb", "fsl,imx27-usb"; reg = <0x80090000 0x10000>; + interrupts = <92>; + fsl,usbphy = <&usbphy1>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx31-bug.dts b/arch/arm/boot/dts/imx31-bug.dts new file mode 100644 index 0000000000000000000000000000000000000000..24731cb78e8ecd72616d272aaeff0e224807e0cc --- /dev/null +++ b/arch/arm/boot/dts/imx31-bug.dts @@ -0,0 +1,31 @@ +/* + * Copyright 2012 Denis 'GNUtoo' Carikli + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "imx31.dtsi" + +/ { + model = "Buglabs i.MX31 Bug 1.x"; + compatible = "fsl,imx31-bug", "fsl,imx31"; + + memory { + reg = <0x80000000 0x8000000>; /* 128M */ + }; + + soc { + aips@43f00000 { /* AIPS1 */ + uart5: serial@43fb4000 { + fsl,uart-has-rtscts; + status = "okay"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx31.dtsi b/arch/arm/boot/dts/imx31.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..eef7099f3e3c160853e18161b64b53fa5b19f23b --- /dev/null +++ b/arch/arm/boot/dts/imx31.dtsi @@ -0,0 +1,88 @@ +/* + * Copyright 2012 Denis 'GNUtoo' Carikli + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + }; + + avic: avic-interrupt-controller@60000000 { + compatible = "fsl,imx31-avic", "fsl,avic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x60000000 0x100000>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&avic>; + ranges; + + aips@43f00000 { /* AIPS1 */ + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x43f00000 0x100000>; + ranges; + + uart1: serial@43f90000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43f90000 0x4000>; + interrupts = <45>; + status = "disabled"; + }; + + uart2: serial@43f94000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43f94000 0x4000>; + interrupts = <32>; + status = "disabled"; + }; + + uart4: serial@43fb0000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43fb0000 0x4000>; + interrupts = <46>; + status = "disabled"; + }; + + uart5: serial@43fb4000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x43fb4000 0x4000>; + interrupts = <47>; + status = "disabled"; + }; + }; + + spba@50000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x50000000 0x100000>; + ranges; + + uart3: serial@5000c000 { + compatible = "fsl,imx31-uart", "fsl,imx21-uart"; + reg = <0x5000c000 0x4000>; + interrupts = <18>; + status = "disabled"; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index bfa65abe8ef29444f4a56ca88c7fa1fd05591a47..922adefdd29120d14e5c7456ddbf3d6144b26f11 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -133,7 +133,7 @@ gpio1: gpio@73f84000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@73f88000 { @@ -143,7 +143,7 @@ gpio2: gpio@73f88000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@73f8c000 { @@ -153,7 +153,7 @@ gpio3: gpio@73f8c000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@73f90000 { @@ -163,7 +163,7 @@ gpio4: gpio@73f90000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; wdog@73f98000 { /* WDOG1 */ diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index e3e869470cd3e4f6dc5f56daf2645f85bf6f14bc..4e735edc78ed7b4f9b6e2389091a759330e5b18c 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -135,7 +135,7 @@ gpio1: gpio@53f84000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@53f88000 { @@ -145,7 +145,7 @@ gpio2: gpio@53f88000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@53f8c000 { @@ -155,7 +155,7 @@ gpio3: gpio@53f8c000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@53f90000 { @@ -165,7 +165,7 @@ gpio4: gpio@53f90000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; wdog@53f98000 { /* WDOG1 */ @@ -203,7 +203,7 @@ gpio5: gpio@53fdc000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@53fe0000 { @@ -213,7 +213,7 @@ gpio6: gpio@53fe0000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@53fe4000 { @@ -223,7 +223,7 @@ gpio7: gpio@53fe4000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; i2c@53fec000 { /* I2C3 */ diff --git a/arch/arm/boot/dts/imx6q-arm2.dts b/arch/arm/boot/dts/imx6q-arm2.dts index db4c6096c562eaea2415570934b4cd7fad4a981a..d792581672cc0ca1710ffaa232f9837f29e722b6 100644 --- a/arch/arm/boot/dts/imx6q-arm2.dts +++ b/arch/arm/boot/dts/imx6q-arm2.dts @@ -22,6 +22,12 @@ memory { }; soc { + gpmi-nand@00112000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand_1>; + status = "disabled"; /* gpmi nand conflicts with SD */ + }; + aips-bus@02100000 { /* AIPS2 */ ethernet@02188000 { phy-mode = "rgmii"; diff --git a/arch/arm/boot/dts/imx6q-sabrelite.dts b/arch/arm/boot/dts/imx6q-sabrelite.dts index e0ec92973e7e7d253e560cb4f66fb72800be2ad9..d42e851ceb97e423fd785e3cd357ba6d70b23d8c 100644 --- a/arch/arm/boot/dts/imx6q-sabrelite.dts +++ b/arch/arm/boot/dts/imx6q-sabrelite.dts @@ -27,6 +27,8 @@ spba-bus@02000000 { ecspi@02008000 { /* eCSPI1 */ fsl,spi-num-chipselects = <1>; cs-gpios = <&gpio3 19 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1_1>; status = "okay"; flash: m25p80@0 { @@ -42,9 +44,31 @@ ssi1: ssi@02028000 { }; }; + iomuxc@020e0000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_hog>; + + gpios { + pinctrl_gpio_hog: gpiohog { + fsl,pins = < + 144 0x80000000 /* MX6Q_PAD_EIM_D22__GPIO_3_22 */ + 121 0x80000000 /* MX6Q_PAD_EIM_D19__GPIO_3_19 */ + >; + }; + }; + }; }; aips-bus@02100000 { /* AIPS2 */ + usb@02184000 { /* USB OTG */ + vbus-supply = <®_usb_otg_vbus>; + status = "okay"; + }; + + usb@02184200 { /* USB1 */ + status = "okay"; + }; + ethernet@02188000 { phy-mode = "rgmii"; phy-reset-gpios = <&gpio3 23 0>; @@ -111,6 +135,15 @@ reg_3p3v: 3p3v { regulator-max-microvolt = <3300000>; regulator-always-on; }; + + reg_usb_otg_vbus: usb_otg_vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 0>; + enable-active-high; + }; }; sound { diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 8c90cbac945f1d2392e590bdbb725e7154f317e5..c25d49584814aade377b4c57f964967ec1f71a09 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -87,6 +87,23 @@ soc { interrupt-parent = <&intc>; ranges; + dma-apbh@00110000 { + compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x00110000 0x2000>; + }; + + gpmi-nand@00112000 { + compatible = "fsl,imx6q-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00112000 0x2000>, <0x00114000 0x2000>; + reg-names = "gpmi-nand", "bch"; + interrupts = <0 13 0x04>, <0 15 0x04>; + interrupt-names = "gpmi-dma", "bch"; + fsl,gpmi-dma-channel = <0>; + status = "disabled"; + }; + timer@00a00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; @@ -266,7 +283,7 @@ gpio1: gpio@0209c000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio2: gpio@020a0000 { @@ -276,7 +293,7 @@ gpio2: gpio@020a0000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio3: gpio@020a4000 { @@ -286,7 +303,7 @@ gpio3: gpio@020a4000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio4: gpio@020a8000 { @@ -296,7 +313,7 @@ gpio4: gpio@020a8000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio5: gpio@020ac000 { @@ -306,7 +323,7 @@ gpio5: gpio@020ac000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio6: gpio@020b0000 { @@ -316,7 +333,7 @@ gpio6: gpio@020b0000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; gpio7: gpio@020b4000 { @@ -326,7 +343,7 @@ gpio7: gpio@020b4000 { gpio-controller; #gpio-cells = <2>; interrupt-controller; - #interrupt-cells = <1>; + #interrupt-cells = <2>; }; kpp@020b8000 { @@ -444,12 +461,14 @@ regulator-vddsoc@140 { }; }; - usbphy@020c9000 { /* USBPHY1 */ + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; }; - usbphy@020ca000 { /* USBPHY2 */ + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = <0 45 0x04>; }; @@ -495,6 +514,30 @@ pinctrl_audmux_1: audmux-1 { }; }; + gpmi-nand { + pinctrl_gpmi_nand_1: gpmi-nand-1 { + fsl,pins = <1328 0xb0b1 /* MX6Q_PAD_NANDF_CLE__RAWNAND_CLE */ + 1336 0xb0b1 /* MX6Q_PAD_NANDF_ALE__RAWNAND_ALE */ + 1344 0xb0b1 /* MX6Q_PAD_NANDF_WP_B__RAWNAND_RESETN */ + 1352 0xb000 /* MX6Q_PAD_NANDF_RB0__RAWNAND_READY0 */ + 1360 0xb0b1 /* MX6Q_PAD_NANDF_CS0__RAWNAND_CE0N */ + 1365 0xb0b1 /* MX6Q_PAD_NANDF_CS1__RAWNAND_CE1N */ + 1371 0xb0b1 /* MX6Q_PAD_NANDF_CS2__RAWNAND_CE2N */ + 1378 0xb0b1 /* MX6Q_PAD_NANDF_CS3__RAWNAND_CE3N */ + 1387 0xb0b1 /* MX6Q_PAD_SD4_CMD__RAWNAND_RDN */ + 1393 0xb0b1 /* MX6Q_PAD_SD4_CLK__RAWNAND_WRN */ + 1397 0xb0b1 /* MX6Q_PAD_NANDF_D0__RAWNAND_D0 */ + 1405 0xb0b1 /* MX6Q_PAD_NANDF_D1__RAWNAND_D1 */ + 1413 0xb0b1 /* MX6Q_PAD_NANDF_D2__RAWNAND_D2 */ + 1421 0xb0b1 /* MX6Q_PAD_NANDF_D3__RAWNAND_D3 */ + 1429 0xb0b1 /* MX6Q_PAD_NANDF_D4__RAWNAND_D4 */ + 1437 0xb0b1 /* MX6Q_PAD_NANDF_D5__RAWNAND_D5 */ + 1445 0xb0b1 /* MX6Q_PAD_NANDF_D6__RAWNAND_D6 */ + 1453 0xb0b1 /* MX6Q_PAD_NANDF_D7__RAWNAND_D7 */ + 1463 0x00b1>; /* MX6Q_PAD_SD4_DAT0__RAWNAND_DQS */ + }; + }; + i2c1 { pinctrl_i2c1_1: i2c1grp-1 { fsl,pins = <137 0x4001b8b1 /* MX6Q_PAD_EIM_D21__I2C1_SCL */ @@ -538,6 +581,14 @@ pinctrl_usdhc4_1: usdhc4grp-1 { 1517 0x17059>; /* MX6Q_PAD_SD4_DAT7__USDHC4_DAT7 */ }; }; + + ecspi1 { + pinctrl_ecspi1_1: ecspi1grp-1 { + fsl,pins = <101 0x100b1 /* MX6Q_PAD_EIM_D17__ECSPI1_MISO */ + 109 0x100b1 /* MX6Q_PAD_EIM_D18__ECSPI1_MOSI */ + 94 0x100b1>; /* MX6Q_PAD_EIM_D16__ECSPI1_SCLK */ + }; + }; }; dcic@020e4000 { /* DCIC1 */ @@ -573,6 +624,36 @@ aipstz@0217c000 { /* AIPSTZ2 */ reg = <0x0217c000 0x4000>; }; + usb@02184000 { /* USB OTG */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = <0 43 0x04>; + fsl,usbphy = <&usbphy1>; + status = "disabled"; + }; + + usb@02184200 { /* USB1 */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = <0 40 0x04>; + fsl,usbphy = <&usbphy2>; + status = "disabled"; + }; + + usb@02184400 { /* USB2 */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = <0 41 0x04>; + status = "disabled"; + }; + + usb@02184600 { /* USB3 */ + compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; + reg = <0x02184600 0x200>; + interrupts = <0 42 0x04>; + status = "disabled"; + }; + ethernet@02188000 { compatible = "fsl,imx6q-fec"; reg = <0x02188000 0x4000>; diff --git a/arch/arm/boot/dts/lpc32xx.dtsi b/arch/arm/boot/dts/lpc32xx.dtsi index 3f5dad801a9806ad3173a0d06dedc0c4a37e8388..e5ffe960dbf3e43181d28e7519b35911c3f95f2c 100644 --- a/arch/arm/boot/dts/lpc32xx.dtsi +++ b/arch/arm/boot/dts/lpc32xx.dtsi @@ -35,13 +35,14 @@ ahb { slc: flash@20020000 { compatible = "nxp,lpc3220-slc"; reg = <0x20020000 0x1000>; - status = "disable"; + status = "disabled"; }; - mlc: flash@200B0000 { + mlc: flash@200a8000 { compatible = "nxp,lpc3220-mlc"; - reg = <0x200B0000 0x1000>; - status = "disable"; + reg = <0x200a8000 0x11000>; + interrupts = <11 0>; + status = "disabled"; }; dma@31000000 { @@ -57,21 +58,21 @@ ohci@31020000 { compatible = "nxp,ohci-nxp", "usb-ohci"; reg = <0x31020000 0x300>; interrupts = <0x3b 0>; - status = "disable"; + status = "disabled"; }; usbd@31020000 { compatible = "nxp,lpc3220-udc"; reg = <0x31020000 0x300>; interrupts = <0x3d 0>, <0x3e 0>, <0x3c 0>, <0x3a 0>; - status = "disable"; + status = "disabled"; }; clcd@31040000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x31040000 0x1000>; interrupts = <0x0e 0>; - status = "disable"; + status = "disabled"; }; mac: ethernet@31060000 { @@ -114,9 +115,10 @@ i2s0: i2s@20094000 { }; sd@20098000 { - compatible = "arm,pl180", "arm,primecell"; + compatible = "arm,pl18x", "arm,primecell"; reg = <0x20098000 0x1000>; interrupts = <0x0f 0>, <0x0d 0>; + status = "disabled"; }; i2s1: i2s@2009C000 { @@ -124,24 +126,42 @@ i2s1: i2s@2009C000 { reg = <0x2009C000 0x1000>; }; + /* UART5 first since it is the default console, ttyS0 */ + uart5: serial@40090000 { + /* actually, ns16550a w/ 64 byte fifos! */ + compatible = "nxp,lpc3220-uart"; + reg = <0x40090000 0x1000>; + interrupts = <9 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; + }; + uart3: serial@40080000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-uart"; reg = <0x40080000 0x1000>; + interrupts = <7 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; }; uart4: serial@40088000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-uart"; reg = <0x40088000 0x1000>; - }; - - uart5: serial@40090000 { - compatible = "nxp,serial"; - reg = <0x40090000 0x1000>; + interrupts = <8 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; }; uart6: serial@40098000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-uart"; reg = <0x40098000 0x1000>; + interrupts = <10 0>; + clock-frequency = <13000000>; + reg-shift = <2>; + status = "disabled"; }; i2c1: i2c@400A0000 { @@ -192,18 +212,24 @@ mic: interrupt-controller@40008000 { }; uart1: serial@40014000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-hsuart"; reg = <0x40014000 0x1000>; + interrupts = <26 0>; + status = "disabled"; }; uart2: serial@40018000 { - compatible = "nxp,serial"; + compatible = "nxp,lpc3220-hsuart"; reg = <0x40018000 0x1000>; + interrupts = <25 0>; + status = "disabled"; }; - uart7: serial@4001C000 { - compatible = "nxp,serial"; - reg = <0x4001C000 0x1000>; + uart7: serial@4001c000 { + compatible = "nxp,lpc3220-hsuart"; + reg = <0x4001c000 0x1000>; + interrupts = <24 0>; + status = "disabled"; }; rtc@40024000 { @@ -235,21 +261,28 @@ adc@40048000 { compatible = "nxp,lpc3220-adc"; reg = <0x40048000 0x1000>; interrupts = <0x27 0>; - status = "disable"; + status = "disabled"; }; tsc@40048000 { compatible = "nxp,lpc3220-tsc"; reg = <0x40048000 0x1000>; interrupts = <0x27 0>; - status = "disable"; + status = "disabled"; }; key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; + interrupts = <54 0>; + status = "disabled"; }; + pwm: pwm@4005C000 { + compatible = "nxp,lpc3220-pwm"; + reg = <0x4005C000 0x8>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/omap2420-h4.dts b/arch/arm/boot/dts/omap2420-h4.dts new file mode 100644 index 0000000000000000000000000000000000000000..25b50b759dec6e4246869b55fc2b329f30de0b68 --- /dev/null +++ b/arch/arm/boot/dts/omap2420-h4.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap2.dtsi" + +/ { + model = "TI OMAP2420 H4 board"; + compatible = "ti,omap2420-h4", "ti,omap2420", "ti,omap2"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x84000000>; /* 64 MB */ + }; +}; diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle.dts index 5b4506c0a8c47d7e1ef506db75cbad9da303b3ec..cdcb98c7e0753b055c3388bd5f170950ba2964a2 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle.dts @@ -61,9 +61,9 @@ &mmc1 { }; &mmc2 { - status = "disable"; + status = "disabled"; }; &mmc3 { - status = "disable"; + status = "disabled"; }; diff --git a/arch/arm/boot/dts/omap3-evm.dts b/arch/arm/boot/dts/omap3-evm.dts index 2eee16ec59b472ad8a4c6bff23601105adabbcf8..f349ee9182ce6b12390f74718c9a978b84acd817 100644 --- a/arch/arm/boot/dts/omap3-evm.dts +++ b/arch/arm/boot/dts/omap3-evm.dts @@ -18,3 +18,31 @@ memory { reg = <0x80000000 0x10000000>; /* 256 MB */ }; }; + +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + }; +}; + +/include/ "twl4030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * TVP5146 Video decoder-in for analog input support. + */ + tvp5146@5c { + compatible = "ti,tvp5146m2"; + reg = <0x5c>; + }; +}; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 99474fa5fac4aa65585625cb77b19338fcdb84cf..810947198208c1fc8b476522b873ccb4136d4e6e 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -215,5 +215,10 @@ mmc3: mmc@480ad000 { compatible = "ti,omap3-hsmmc"; ti,hwmods = "mmc3"; }; + + wdt2: wdt@48314000 { + compatible = "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; }; }; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 1efe0c5879855ebbc4165d09f21403eb86ed9be6..9880c12877b3f5347ef4d5c84cdfadeb028a67d1 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -32,6 +32,30 @@ mmc { linux,default-trigger = "mmc0"; }; }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "PandaBoard"; + + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; }; &i2c1 { @@ -43,6 +67,19 @@ twl: twl@48 { interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ interrupt-parent = <&gic>; }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + }; }; /include/ "twl6030.dtsi" @@ -74,15 +111,15 @@ &mmc1 { }; &mmc2 { - status = "disable"; + status = "disabled"; }; &mmc3 { - status = "disable"; + status = "disabled"; }; &mmc4 { - status = "disable"; + status = "disabled"; }; &mmc5 { diff --git a/arch/arm/boot/dts/omap4-pandaES.dts b/arch/arm/boot/dts/omap4-pandaES.dts new file mode 100644 index 0000000000000000000000000000000000000000..d4ba43a48d9b3f46a354267a9eb1d11b9739f3a4 --- /dev/null +++ b/arch/arm/boot/dts/omap4-pandaES.dts @@ -0,0 +1,24 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/include/ "omap4-panda.dts" + +/* Audio routing is differnet between PandaBoard4430 and PandaBoardES */ +&sound { + ti,model = "PandaBoardES"; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "AFML", "Line In", + "AFMR", "Line In"; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index d08c4d1372800a0f944489ace4495db188c499c7..72216e932fc0c7c8d5632a0df5173d7bfe05bbe8 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -28,6 +28,14 @@ vdd_eth: fixedregulator@0 { regulator-boot-on; }; + vbat: fixedregulator@2 { + compatible = "regulator-fixed"; + regulator-name = "VBAT"; + regulator-min-microvolt = <3750000>; + regulator-max-microvolt = <3750000>; + regulator-boot-on; + }; + leds { compatible = "gpio-leds"; debug0 { @@ -70,6 +78,41 @@ user3 { gpios = <&gpio5 11 0>; /* 139 */ }; }; + + sound { + compatible = "ti,abe-twl6040"; + ti,model = "SDP4430"; + + ti,jack-detection = <1>; + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + ti,dmic = <&dmic>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Earphone Spk", "EP", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "Vibrator", "VIBRAL", + "Vibrator", "VIBRAR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "MAINMIC", "Main Handset Mic", + "Main Handset Mic", "Main Mic Bias", + "SUBMIC", "Sub Handset Mic", + "Sub Handset Mic", "Main Mic Bias", + "AFML", "Line In", + "AFMR", "Line In", + "DMic", "Digital Mic", + "Digital Mic", "Digital Mic1 Bias"; + }; }; &i2c1 { @@ -81,6 +124,31 @@ twl: twl@48 { interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ interrupt-parent = <&gic>; }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + /* SPI = 0, IRQ# = 119, 4 = active high level-sensitive */ + interrupts = <0 119 4>; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio4 31 0>; /* gpio line 127 */ + + vio-supply = <&v1v8>; + v2v1-supply = <&v2v1>; + enable-active-high; + + /* regulators for vibra motor */ + vddvibl-supply = <&vbat>; + vddvibr-supply = <&vbat>; + + vibra { + /* Vibra driver, motor resistance parameters */ + ti,vibldrv-res = <8>; + ti,vibrdrv-res = <3>; + ti,viblmotor-res = <10>; + ti,vibrmotor-res = <10>; + }; + }; }; /include/ "twl6030.dtsi" @@ -147,11 +215,11 @@ &mmc2 { }; &mmc3 { - status = "disable"; + status = "disabled"; }; &mmc4 { - status = "disable"; + status = "disabled"; }; &mmc5 { diff --git a/arch/arm/boot/dts/omap4-var_som.dts b/arch/arm/boot/dts/omap4-var_som.dts new file mode 100644 index 0000000000000000000000000000000000000000..6601e6af6092f78d11757a8c34e1ec69ca6e9fa7 --- /dev/null +++ b/arch/arm/boot/dts/omap4-var_som.dts @@ -0,0 +1,96 @@ +/* + * Copyright (C) 2012 Variscite Ltd. - http://www.variscite.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap4.dtsi" + +/ { + model = "Variscite OMAP4 SOM"; + compatible = "var,omap4-var_som", "ti,omap4430", "ti,omap4"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; + + vdd_eth: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "VDD_ETH"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + regulator-boot-on; + }; +}; + +&i2c1 { + clock-frequency = <400000>; + + twl: twl@48 { + reg = <0x48>; + /* SPI = 0, IRQ# = 7, 4 = active high level-sensitive */ + interrupts = <0 7 4>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-parent = <&gic>; + }; +}; + +/include/ "twl6030.dtsi" + +&i2c2 { + clock-frequency = <400000>; +}; + +&i2c3 { + clock-frequency = <400000>; + + /* + * Temperature Sensor + * http://www.ti.com/lit/ds/symlink/tmp105.pdf + */ + tmp105@49 { + compatible = "ti,tmp105"; + reg = <0x49>; + }; +}; + +&i2c4 { + clock-frequency = <400000>; +}; + +&mcspi1 { + eth@0 { + compatible = "ks8851"; + spi-max-frequency = <24000000>; + reg = <0>; + interrupt-parent = <&gpio6>; + interrupts = <11>; /* gpio line 171 */ + vdd-supply = <&vdd_eth>; + }; +}; + +&mmc1 { + vmmc-supply = <&vmmc>; + ti,bus-width = <8>; + ti,non-removable; +}; + +&mmc2 { + status = "disabled"; +}; + +&mmc3 { + status = "disabled"; +}; + +&mmc4 { + status = "disabled"; +}; + +&mmc5 { + ti,bus-width = <4>; +}; diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 359c4979c8aab6fcc7e0ec40ed1e69ec9b3d8802..04cbbcb6ff91796ac78dfd2e15035ad32a9c89e1 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -272,5 +272,28 @@ mmc5: mmc@480d5000 { ti,hwmods = "mmc5"; ti,needs-special-reset; }; + + wdt2: wdt@4a314000 { + compatible = "ti,omap4-wdt", "ti,omap3-wdt"; + ti,hwmods = "wd_timer2"; + }; + + mcpdm: mcpdm@40132000 { + compatible = "ti,omap4-mcpdm"; + reg = <0x40132000 0x7f>, /* MPU private access */ + <0x49032000 0x7f>; /* L3 Interconnect */ + interrupts = <0 112 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "mcpdm"; + }; + + dmic: dmic@4012e000 { + compatible = "ti,omap4-dmic"; + reg = <0x4012e000 0x7f>, /* MPU private access */ + <0x4902e000 0x7f>; /* L3 Interconnect */ + interrupts = <0 114 0x4>; + interrupt-parent = <&gic>; + ti,hwmods = "dmic"; + }; }; }; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts new file mode 100644 index 0000000000000000000000000000000000000000..200c39ad1c8225508f369dbdecfb3f75b18395d1 --- /dev/null +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -0,0 +1,20 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +/include/ "omap5.dtsi" + +/ { + model = "TI OMAP5 EVM board"; + compatible = "ti,omap5-evm", "ti,omap5"; + + memory { + device_type = "memory"; + reg = <0x80000000 0x40000000>; /* 1 GB */ + }; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..57e527083746ed93a69624c0009af7ad548bca67 --- /dev/null +++ b/arch/arm/boot/dts/omap5.dtsi @@ -0,0 +1,184 @@ +/* + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * Based on "omap4.dtsi" + */ + +/* + * Carveout for multimedia usecases + * It should be the last 48MB of the first 512MB memory part + * In theory, it should not even exist. That zone should be reserved + * dynamically during the .reserve callback. + */ +/memreserve/ 0x9d000000 0x03000000; + +/include/ "skeleton.dtsi" + +/ { + compatible = "ti,omap5"; + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + }; + + cpus { + cpu@0 { + compatible = "arm,cortex-a15"; + }; + cpu@1 { + compatible = "arm,cortex-a15"; + }; + }; + + /* + * The soc node represents the soc top level view. It is uses for IPs + * that are not memory mapped in the MPU view or for the MPU itself. + */ + soc { + compatible = "ti,omap-infra"; + mpu { + compatible = "ti,omap5-mpu"; + ti,hwmods = "mpu"; + }; + }; + + /* + * XXX: Use a flat representation of the OMAP3 interconnect. + * The real OMAP interconnect network is quite complex. + * Since that will not bring real advantage to represent that in DT for + * the moment, just use a fake OCP bus entry to represent the whole bus + * hierarchy. + */ + ocp { + compatible = "ti,omap4-l3-noc", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + + gic: interrupt-controller@48211000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x48211000 0x1000>, + <0x48212000 0x1000>; + }; + + gpio1: gpio@4ae10000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio1"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio2: gpio@48055000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio2"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio3: gpio@48057000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio3"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio4: gpio@48059000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio4"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio5: gpio@4805b000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio5"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio6: gpio@4805d000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio6"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio7: gpio@48051000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio7"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + gpio8: gpio@48053000 { + compatible = "ti,omap4-gpio"; + ti,hwmods = "gpio8"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <1>; + }; + + uart1: serial@4806a000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart1"; + clock-frequency = <48000000>; + }; + + uart2: serial@4806c000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart2"; + clock-frequency = <48000000>; + }; + + uart3: serial@48020000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart3"; + clock-frequency = <48000000>; + }; + + uart4: serial@4806e000 { + compatible = "ti,omap4-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + + uart5: serial@48066000 { + compatible = "ti,omap5-uart"; + ti,hwmods = "uart5"; + clock-frequency = <48000000>; + }; + + uart6: serial@48068000 { + compatible = "ti,omap6-uart"; + ti,hwmods = "uart6"; + clock-frequency = <48000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/phy3250.dts b/arch/arm/boot/dts/phy3250.dts index c4ff6d1a018bbee575fd99432c518d0ed530e769..802ec5b2fd00d0d40977624a9ae382b55e416b76 100644 --- a/arch/arm/boot/dts/phy3250.dts +++ b/arch/arm/boot/dts/phy3250.dts @@ -54,6 +54,17 @@ slc: flash@20020000 { #address-cells = <1>; #size-cells = <1>; + nxp,wdr-clks = <14>; + nxp,wwidth = <40000000>; + nxp,whold = <100000000>; + nxp,wsetup = <100000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <40000000>; + nxp,rhold = <66666666>; + nxp,rsetup = <100000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + mtd0@00000000 { label = "phy3250-boot"; reg = <0x00000000 0x00064000>; @@ -83,6 +94,14 @@ mtd4@00604000 { }; apb { + uart5: serial@40090000 { + status = "okay"; + }; + + uart3: serial@40080000 { + status = "okay"; + }; + i2c1: i2c@400A0000 { clock-frequency = <100000>; @@ -114,16 +133,58 @@ isp1301: usb-transceiver@2c { }; ssp0: ssp@20084000 { + #address-cells = <1>; + #size-cells = <0>; + pl022,num-chipselects = <1>; + cs-gpios = <&gpio 3 5 0>; + eeprom: at25@0 { + pl022,hierarchy = <0>; + pl022,interface = <0>; + pl022,slave-tx-disable = <0>; + pl022,com-mode = <0>; + pl022,rx-level-trig = <1>; + pl022,tx-level-trig = <1>; + pl022,ctrl-len = <11>; + pl022,wait-state = <0>; + pl022,duplex = <0>; + + at25,byte-len = <0x8000>; + at25,addr-mode = <2>; + at25,page-size = <64>; + compatible = "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; }; }; + + sd@20098000 { + wp-gpios = <&gpio 3 0 0>; + cd-gpios = <&gpio 3 1 0>; + cd-inverted; + bus-width = <4>; + status = "okay"; + }; }; fab { + uart2: serial@40018000 { + status = "okay"; + }; + tsc@40048000 { status = "okay"; }; + + key@40050000 { + status = "okay"; + keypad,num-rows = <1>; + keypad,num-columns = <1>; + nxp,debounce-delay-ms = <3>; + nxp,scan-delay-ms = <34>; + linux,keymap = <0x00000002>; + }; }; }; diff --git a/arch/arm/boot/dts/snowball.dts b/arch/arm/boot/dts/snowball.dts index ec3c339751104c43594062c30a47f2601b02b731..7e334d4cae217c8584032666b4301325944786ed 100644 --- a/arch/arm/boot/dts/snowball.dts +++ b/arch/arm/boot/dts/snowball.dts @@ -77,6 +77,8 @@ leds { used-led { label = "user_led"; gpios = <&gpio4 14 0x4>; + default-state = "on"; + linux,default-trigger = "heartbeat"; }; }; @@ -101,15 +103,30 @@ ethernet@0 { }; }; + // External Micro SD slot sdi@80126000 { - status = "enabled"; + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; + + #gpio-cells = <1>; cd-gpios = <&gpio6 26 0x4>; // 218 + cd-inverted; + + status = "okay"; }; + // On-board eMMC sdi@80114000 { - status = "enabled"; + arm,primecell-periphid = <0x10480180>; + max-frequency = <50000000>; + bus-width = <8>; + mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; + + status = "okay"; }; uart@80120000 { diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..0772f5739f59573aa1403b6cc0e6efd8a873892a --- /dev/null +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -0,0 +1,147 @@ +/* + * Copyright (C) 2012 Altera + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/include/ "skeleton.dtsi" + +/ { + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &gmac0; + serial0 = &uart0; + serial1 = &uart1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + }; + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&L2>; + }; + }; + + intc: intc@fffed000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xfffed000 0x1000>, + <0xfffec100 0x100>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + device_type = "soc"; + interrupt-parent = <&intc>; + ranges; + + amba { + compatible = "arm,amba-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pdma: pdma@ffe01000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xffe01000 0x1000>; + interrupts = <0 180 4>; + }; + }; + + gmac0: stmmac@ff700000 { + compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac"; + reg = <0xff700000 0x2000>; + interrupts = <0 115 4>; + interrupt-names = "macirq"; + mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */ + phy-mode = "gmii"; + }; + + L2: l2-cache@fffef000 { + compatible = "arm,pl310-cache"; + reg = <0xfffef000 0x1000>; + interrupts = <0 38 0x04>; + cache-unified; + cache-level = <2>; + }; + + /* Local timer */ + timer@fffec600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0xfffec600 0x100>; + interrupts = <1 13 0xf04>; + }; + + timer0: timer@ffc08000 { + compatible = "snps,dw-apb-timer-sp"; + interrupts = <0 167 4>; + clock-frequency = <200000000>; + reg = <0xffc08000 0x1000>; + }; + + timer1: timer@ffc09000 { + compatible = "snps,dw-apb-timer-sp"; + interrupts = <0 168 4>; + clock-frequency = <200000000>; + reg = <0xffc09000 0x1000>; + }; + + timer2: timer@ffd00000 { + compatible = "snps,dw-apb-timer-osc"; + interrupts = <0 169 4>; + clock-frequency = <200000000>; + reg = <0xffd00000 0x1000>; + }; + + timer3: timer@ffd01000 { + compatible = "snps,dw-apb-timer-osc"; + interrupts = <0 170 4>; + clock-frequency = <200000000>; + reg = <0xffd01000 0x1000>; + }; + + uart0: uart@ffc02000 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc02000 0x1000>; + clock-frequency = <7372800>; + interrupts = <0 162 4>; + reg-shift = <2>; + reg-io-width = <4>; + }; + + uart1: uart@ffc03000 { + compatible = "snps,dw-apb-uart"; + reg = <0xffc03000 0x1000>; + clock-frequency = <7372800>; + interrupts = <0 163 4>; + reg-shift = <2>; + reg-io-width = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dts b/arch/arm/boot/dts/socfpga_cyclone5.dts new file mode 100644 index 0000000000000000000000000000000000000000..ab7e4a94299fbcf704b3560c816f403248ef24ed --- /dev/null +++ b/arch/arm/boot/dts/socfpga_cyclone5.dts @@ -0,0 +1,34 @@ +/* + * Copyright (C) 2012 Altera Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +/dts-v1/; +/include/ "socfpga.dtsi" + +/ { + model = "Altera SOCFPGA Cyclone V"; + compatible = "altr,socfpga-cyclone5"; + + chosen { + bootargs = "console=ttyS0,57600"; + }; + + memory { + name = "memory"; + device_type = "memory"; + reg = <0x0 0x10000000>; /* 256MB */ + }; +}; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 10dcec7e7321be6b3a68e05d021a47cbf5e35601..f7b84aced654ca643bc49ebe83b376425a6b893f 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -43,8 +43,8 @@ gic: interrupt-controller@ec801000 { pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 8 0x04 - 0 9 0x04>; + interrupts = <0 6 0x04 + 0 7 0x04>; }; L2: l2-cache { @@ -119,8 +119,8 @@ fsmc: flash@b0000000 { gmac0: eth@e2000000 { compatible = "st,spear600-gmac"; reg = <0xe2000000 0x8000>; - interrupts = <0 23 0x4 - 0 24 0x4>; + interrupts = <0 33 0x4 + 0 34 0x4>; interrupt-names = "macirq", "eth_wake_irq"; status = "disabled"; }; @@ -202,6 +202,7 @@ gpio1: gpio@e0680000 { kbd@e0300000 { compatible = "st,spear300-kbd"; reg = <0xe0300000 0x1000>; + interrupts = <0 52 0x4>; status = "disabled"; }; @@ -224,7 +225,7 @@ rtc@e0580000 { serial@e0000000 { compatible = "arm,pl011", "arm,primecell"; reg = <0xe0000000 0x1000>; - interrupts = <0 36 0x4>; + interrupts = <0 35 0x4>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index c13fd1f3b09f7320b189e6a0795bfd4711969825..e4e912f9502466da3ab44a26eda9f8c83e383d8e 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -15,8 +15,8 @@ /include/ "spear320.dtsi" / { - model = "ST SPEAr300 Evaluation Board"; - compatible = "st,spear300-evb", "st,spear300"; + model = "ST SPEAr320 Evaluation Board"; + compatible = "st,spear320-evb", "st,spear320"; #address-cells = <1>; #size-cells = <1>; @@ -26,7 +26,7 @@ memory { ahb { pinmux@b3000000 { - st,pinmux-mode = <3>; + st,pinmux-mode = <4>; pinctrl-names = "default"; pinctrl-0 = <&state_default>; diff --git a/arch/arm/boot/dts/spear600.dtsi b/arch/arm/boot/dts/spear600.dtsi index 089f0a42c50ef4244765efc59450011637e33a08..a3c36e47d7efcafee29eb73865eb5dec5651d4a4 100644 --- a/arch/arm/boot/dts/spear600.dtsi +++ b/arch/arm/boot/dts/spear600.dtsi @@ -181,6 +181,7 @@ i2c@d0200000 { timer@f0000000 { compatible = "st,spear-timer"; reg = <0xf0000000 0x400>; + interrupt-parent = <&vic0>; interrupts = <16>; }; }; diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts similarity index 99% rename from arch/arm/boot/dts/tegra-harmony.dts rename to arch/arm/boot/dts/tegra20-harmony.dts index 7de701365fce6b9e6594e16491ad97da9cfa75fb..f146dbf6f7f8c40f0a453d0e2d09887943ceef3f 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -307,7 +307,6 @@ sdhci@c8000600 { cd-gpios = <&gpio 58 0>; /* gpio PH2 */ wp-gpios = <&gpio 59 0>; /* gpio PH3 */ power-gpios = <&gpio 70 0>; /* gpio PI6 */ - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts similarity index 99% rename from arch/arm/boot/dts/tegra-paz00.dts rename to arch/arm/boot/dts/tegra20-paz00.dts index bfeb117d5aea639bdd0f8949796593b4d881da26..684a9e1ff7e9c05d1479c071e3d4658c652337ee 100644 --- a/arch/arm/boot/dts/tegra-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -301,7 +301,6 @@ sdhci@c8000000 { sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts similarity index 88% rename from arch/arm/boot/dts/tegra-seaboard.dts rename to arch/arm/boot/dts/tegra20-seaboard.dts index 89cb7f2acd92cfa9ebbe8ceb8bb18823d62ceeeb..85e621ab2968d2947bf0b6dac96a305d5afbf614 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -64,11 +64,6 @@ dap4 { nvidia,pins = "dap4"; nvidia,function = "dap4"; }; - ddc { - nvidia,pins = "ddc", "owc", "spdi", "spdo", - "uac"; - nvidia,function = "rsvd2"; - }; dta { nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte"; nvidia,function = "vi"; @@ -129,14 +124,14 @@ ld0 { "lspi", "lvp1", "lvs"; nvidia,function = "displaya"; }; + owc { + nvidia,pins = "owc", "spdi", "spdo", "uac"; + nvidia,function = "rsvd2"; + }; pmc { nvidia,pins = "pmc"; nvidia,function = "pwr_on"; }; - pta { - nvidia,pins = "pta"; - nvidia,function = "i2c2"; - }; rm { nvidia,pins = "rm"; nvidia,function = "i2c1"; @@ -176,7 +171,7 @@ uca { conf_ata { nvidia,pins = "ata", "atb", "atc", "atd", "cdev1", "cdev2", "dap1", "dap2", - "dap4", "dtf", "gma", "gmc", "gmd", + "dap4", "ddc", "dtf", "gma", "gmc", "gmd", "gme", "gpu", "gpu7", "i2cp", "irrx", "irtx", "pta", "rm", "sdc", "sdd", "slxd", "slxk", "spdi", "spdo", "uac", @@ -185,7 +180,7 @@ conf_ata { nvidia,tristate = <0>; }; conf_ate { - nvidia,pins = "ate", "csus", "dap3", "ddc", + nvidia,pins = "ate", "csus", "dap3", "gpv", "owc", "slxc", "spib", "spid", "spie"; nvidia,pull = <0>; @@ -255,6 +250,39 @@ drive_sdio1 { nvidia,slew-rate-falling = <3>; }; }; + + state_i2cmux_ddc: pinmux_i2cmux_ddc { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; + + state_i2cmux_pta: pinmux_i2cmux_pta { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "i2c2"; + }; + }; + + state_i2cmux_idle: pinmux_i2cmux_idle { + ddc { + nvidia,pins = "ddc"; + nvidia,function = "rsvd4"; + }; + pta { + nvidia,pins = "pta"; + nvidia,function = "rsvd4"; + }; + }; }; i2s@70002800 { @@ -303,12 +331,37 @@ gyrometer@68 { i2c@7000c400 { status = "okay"; clock-frequency = <100000>; + }; + + i2cmux { + compatible = "i2c-mux-pinctrl"; + #address-cells = <1>; + #size-cells = <0>; + + i2c-parent = <&{/i2c@7000c400}>; - smart-battery@b { - compatible = "ti,bq20z75", "smart-battery-1.1"; - reg = <0xb>; - ti,i2c-retry-count = <2>; - ti,poll-retry-count = <10>; + pinctrl-names = "ddc", "pta", "idle"; + pinctrl-0 = <&state_i2cmux_ddc>; + pinctrl-1 = <&state_i2cmux_pta>; + pinctrl-2 = <&state_i2cmux_idle>; + + i2c@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c@1 { + reg = <1>; + #address-cells = <1>; + #size-cells = <0>; + + smart-battery@b { + compatible = "ti,bq20z75", "smart-battery-1.1"; + reg = <0xb>; + ti,i2c-retry-count = <2>; + ti,poll-retry-count = <10>; + }; }; }; @@ -334,7 +387,7 @@ magnetometer@c { }; }; - emc { + memory-controller@0x7000f400 { emc-table@190000 { reg = <190000>; compatible = "nvidia,tegra20-emc-table"; @@ -397,7 +450,6 @@ sdhci@c8000400 { sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts similarity index 100% rename from arch/arm/boot/dts/tegra-trimslice.dts rename to arch/arm/boot/dts/tegra20-trimslice.dts diff --git a/arch/arm/boot/dts/tegra-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts similarity index 99% rename from arch/arm/boot/dts/tegra-ventana.dts rename to arch/arm/boot/dts/tegra20-ventana.dts index 445343b0fbdd7bc7eedbd989196bac17f7ffc383..be90544e6b590ca44b81aa0b119eb1dca504238c 100644 --- a/arch/arm/boot/dts/tegra-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -314,7 +314,6 @@ sdhci@c8000400 { sdhci@c8000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts new file mode 100644 index 0000000000000000000000000000000000000000..6916310bf58f8534af4abe705f0cbc757238b5aa --- /dev/null +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -0,0 +1,301 @@ +/dts-v1/; + +/include/ "tegra20.dtsi" + +/ { + model = "NVIDIA Tegra2 Whistler evaluation board"; + compatible = "nvidia,whistler", "nvidia,tegra20"; + + memory { + reg = <0x00000000 0x20000000>; + }; + + pinmux { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + ata { + nvidia,pins = "ata", "atb", "ate", "gma", "gmb", + "gmc", "gmd", "gpu"; + nvidia,function = "gmi"; + }; + atc { + nvidia,pins = "atc", "atd"; + nvidia,function = "sdio4"; + }; + cdev1 { + nvidia,pins = "cdev1"; + nvidia,function = "plla_out"; + }; + cdev2 { + nvidia,pins = "cdev2"; + nvidia,function = "osc"; + }; + crtp { + nvidia,pins = "crtp"; + nvidia,function = "crt"; + }; + csus { + nvidia,pins = "csus"; + nvidia,function = "vi_sensor_clk"; + }; + dap1 { + nvidia,pins = "dap1"; + nvidia,function = "dap1"; + }; + dap2 { + nvidia,pins = "dap2"; + nvidia,function = "dap2"; + }; + dap3 { + nvidia,pins = "dap3"; + nvidia,function = "dap3"; + }; + dap4 { + nvidia,pins = "dap4"; + nvidia,function = "dap4"; + }; + ddc { + nvidia,pins = "ddc"; + nvidia,function = "i2c2"; + }; + dta { + nvidia,pins = "dta", "dtb", "dtc", "dtd"; + nvidia,function = "vi"; + }; + dte { + nvidia,pins = "dte"; + nvidia,function = "rsvd1"; + }; + dtf { + nvidia,pins = "dtf"; + nvidia,function = "i2c3"; + }; + gme { + nvidia,pins = "gme"; + nvidia,function = "dap5"; + }; + gpu7 { + nvidia,pins = "gpu7"; + nvidia,function = "rtck"; + }; + gpv { + nvidia,pins = "gpv"; + nvidia,function = "pcie"; + }; + hdint { + nvidia,pins = "hdint", "pta"; + nvidia,function = "hdmi"; + }; + i2cp { + nvidia,pins = "i2cp"; + nvidia,function = "i2cp"; + }; + irrx { + nvidia,pins = "irrx", "irtx"; + nvidia,function = "uartb"; + }; + kbca { + nvidia,pins = "kbca", "kbcc", "kbce", "kbcf"; + nvidia,function = "kbc"; + }; + kbcb { + nvidia,pins = "kbcb", "kbcd"; + nvidia,function = "sdio2"; + }; + lcsn { + nvidia,pins = "lcsn", "lsck", "lsda", "lsdi", + "spia", "spib", "spic"; + nvidia,function = "spi3"; + }; + ld0 { + nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", + "ld5", "ld6", "ld7", "ld8", "ld9", + "ld10", "ld11", "ld12", "ld13", "ld14", + "ld15", "ld16", "ld17", "ldc", "ldi", + "lhp0", "lhp1", "lhp2", "lhs", "lm0", + "lm1", "lpp", "lpw0", "lpw1", "lpw2", + "lsc0", "lsc1", "lspi", "lvp0", "lvp1", + "lvs"; + nvidia,function = "displaya"; + }; + owc { + nvidia,pins = "owc", "uac"; + nvidia,function = "owr"; + }; + pmc { + nvidia,pins = "pmc"; + nvidia,function = "pwr_on"; + }; + rm { + nvidia,pins = "rm"; + nvidia,function = "i2c1"; + }; + sdb { + nvidia,pins = "sdb", "sdc", "sdd", "slxa", + "slxc", "slxd", "slxk"; + nvidia,function = "sdio3"; + }; + sdio1 { + nvidia,pins = "sdio1"; + nvidia,function = "sdio1"; + }; + spdi { + nvidia,pins = "spdi", "spdo"; + nvidia,function = "rsvd2"; + }; + spid { + nvidia,pins = "spid", "spie", "spig", "spih"; + nvidia,function = "spi2_alt"; + }; + spif { + nvidia,pins = "spif"; + nvidia,function = "spi2"; + }; + uaa { + nvidia,pins = "uaa", "uab"; + nvidia,function = "uarta"; + }; + uad { + nvidia,pins = "uad"; + nvidia,function = "irda"; + }; + uca { + nvidia,pins = "uca", "ucb"; + nvidia,function = "uartc"; + }; + uda { + nvidia,pins = "uda"; + nvidia,function = "spi1"; + }; + conf_ata { + nvidia,pins = "ata", "atb", "atc", "ddc", "gma", + "gmb", "gmc", "gmd", "irrx", "irtx", + "kbca", "kbcb", "kbcc", "kbcd", "kbce", + "kbcf", "sdc", "sdd", "spie", "spig", + "spih", "uaa", "uab", "uad", "uca", + "ucb"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + conf_atd { + nvidia,pins = "atd", "ate", "cdev1", "csus", + "dap1", "dap2", "dap3", "dap4", "dte", + "dtf", "gpu", "gpu7", "gpv", "i2cp", + "rm", "sdio1", "slxa", "slxc", "slxd", + "slxk", "spdi", "spdo", "uac", "uda"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + conf_cdev2 { + nvidia,pins = "cdev2", "spia", "spib"; + nvidia,pull = <1>; + nvidia,tristate = <1>; + }; + conf_ck32 { + nvidia,pins = "ck32", "ddrc", "lc", "pmca", + "pmcb", "pmcc", "pmcd", "xm2c", + "xm2d"; + nvidia,pull = <0>; + }; + conf_crtp { + nvidia,pins = "crtp"; + nvidia,pull = <0>; + nvidia,tristate = <1>; + }; + conf_dta { + nvidia,pins = "dta", "dtb", "dtc", "dtd", + "spid", "spif"; + nvidia,pull = <1>; + nvidia,tristate = <0>; + }; + conf_gme { + nvidia,pins = "gme", "owc", "pta", "spic"; + nvidia,pull = <2>; + nvidia,tristate = <1>; + }; + conf_ld17_0 { + nvidia,pins = "ld17_0", "ld19_18", "ld21_20", + "ld23_22"; + nvidia,pull = <1>; + }; + conf_ls { + nvidia,pins = "ls", "pmce"; + nvidia,pull = <2>; + }; + drive_dap1 { + nvidia,pins = "drive_dap1"; + nvidia,high-speed-mode = <0>; + nvidia,schmitt = <1>; + nvidia,low-power-mode = <0>; + nvidia,pull-down-strength = <0>; + nvidia,pull-up-strength = <0>; + nvidia,slew-rate-rising = <0>; + nvidia,slew-rate-falling = <0>; + }; + }; + }; + + i2s@70002800 { + status = "okay"; + }; + + serial@70006000 { + status = "okay"; + clock-frequency = <216000000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + codec: codec@1a { + compatible = "wlf,wm8753"; + reg = <0x1a>; + }; + + tca6416: gpio@20 { + compatible = "ti,tca6416"; + reg = <0x20>; + gpio-controller; + #gpio-cells = <2>; + }; + }; + + usb@c5000000 { + status = "okay"; + nvidia,vbus-gpio = <&tca6416 0 0>; /* GPIO_PMU0 */ + }; + + usb@c5008000 { + status = "okay"; + nvidia,vbus-gpio = <&tca6416 1 0>; /* GPIO_PMU1 */ + }; + + sdhci@c8000400 { + status = "okay"; + wp-gpios = <&gpio 173 0>; /* gpio PV5 */ + bus-width = <8>; + }; + + sdhci@c8000600 { + status = "okay"; + bus-width = <8>; + }; + + sound { + compatible = "nvidia,tegra-audio-wm8753-whistler", + "nvidia,tegra-audio-wm8753"; + nvidia,model = "NVIDIA Tegra Whistler"; + + nvidia,audio-routing = + "Headphone Jack", "LOUT1", + "Headphone Jack", "ROUT1", + "MIC2", "Mic Jack", + "MIC2N", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&codec>; + }; +}; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index c417d67e902755df968f812a9fe4f94101cbb796..9f1921634eb7b8ab19c671fc2de17f0d44a50fc4 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -72,7 +72,7 @@ tegra_i2s1: i2s@70002800 { reg = <0x70002800 0x200>; interrupts = <0 13 0x04>; nvidia,dma-request-selector = <&apbdma 2>; - status = "disable"; + status = "disabled"; }; tegra_i2s2: i2s@70002a00 { @@ -80,7 +80,7 @@ tegra_i2s2: i2s@70002a00 { reg = <0x70002a00 0x200>; interrupts = <0 3 0x04>; nvidia,dma-request-selector = <&apbdma 1>; - status = "disable"; + status = "disabled"; }; serial@70006000 { @@ -88,7 +88,7 @@ serial@70006000 { reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006040 { @@ -96,7 +96,7 @@ serial@70006040 { reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006200 { @@ -104,7 +104,7 @@ serial@70006200 { reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006300 { @@ -112,7 +112,7 @@ serial@70006300 { reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006400 { @@ -120,7 +120,7 @@ serial@70006400 { reg = <0x70006400 0x100>; reg-shift = <2>; interrupts = <0 91 0x04>; - status = "disable"; + status = "disabled"; }; i2c@7000c000 { @@ -129,7 +129,7 @@ i2c@7000c000 { interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c400 { @@ -138,7 +138,7 @@ i2c@7000c400 { interrupts = <0 84 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c500 { @@ -147,7 +147,7 @@ i2c@7000c500 { interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000d000 { @@ -156,7 +156,7 @@ i2c@7000d000 { interrupts = <0 53 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; pmc { @@ -164,7 +164,7 @@ pmc { reg = <0x7000e400 0x400>; }; - mc { + memory-controller@0x7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; @@ -177,7 +177,7 @@ gart { 0x58000000 0x02000000>; /* GART aperture */ }; - emc { + memory-controller@0x7000f400 { compatible = "nvidia,tegra20-emc"; reg = <0x7000f400 0x200>; #address-cells = <1>; @@ -190,7 +190,7 @@ usb@c5000000 { interrupts = <0 20 0x04>; phy_type = "utmi"; nvidia,has-legacy-mode; - status = "disable"; + status = "disabled"; }; usb@c5004000 { @@ -198,7 +198,7 @@ usb@c5004000 { reg = <0xc5004000 0x4000>; interrupts = <0 21 0x04>; phy_type = "ulpi"; - status = "disable"; + status = "disabled"; }; usb@c5008000 { @@ -206,35 +206,35 @@ usb@c5008000 { reg = <0xc5008000 0x4000>; interrupts = <0 97 0x04>; phy_type = "utmi"; - status = "disable"; + status = "disabled"; }; sdhci@c8000000 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000000 0x200>; interrupts = <0 14 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000200 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000200 0x200>; interrupts = <0 15 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000400 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000400 0x200>; interrupts = <0 19 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@c8000600 { compatible = "nvidia,tegra20-sdhci"; reg = <0xc8000600 0x200>; interrupts = <0 31 0x04>; - status = "disable"; + status = "disabled"; }; pmu { diff --git a/arch/arm/boot/dts/tegra-cardhu.dts b/arch/arm/boot/dts/tegra30-cardhu.dts similarity index 99% rename from arch/arm/boot/dts/tegra-cardhu.dts rename to arch/arm/boot/dts/tegra30-cardhu.dts index 36321bceec46beb8ae812bc1ff5e80f2db45fab0..c169bced131e32038f4523f599c054b22690bdb6 100644 --- a/arch/arm/boot/dts/tegra-cardhu.dts +++ b/arch/arm/boot/dts/tegra30-cardhu.dts @@ -144,7 +144,6 @@ sdhci@78000000 { sdhci@78000600 { status = "okay"; - support-8bit; bus-width = <8>; }; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 2dcc09e784b58713cb514fe89044cd821c6a82e3..da740191771f8493f1734636a88244869be5abff 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -82,7 +82,7 @@ serial@70006000 { reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <0 36 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006040 { @@ -90,7 +90,7 @@ serial@70006040 { reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <0 37 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006200 { @@ -98,7 +98,7 @@ serial@70006200 { reg = <0x70006200 0x100>; reg-shift = <2>; interrupts = <0 46 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006300 { @@ -106,7 +106,7 @@ serial@70006300 { reg = <0x70006300 0x100>; reg-shift = <2>; interrupts = <0 90 0x04>; - status = "disable"; + status = "disabled"; }; serial@70006400 { @@ -114,7 +114,7 @@ serial@70006400 { reg = <0x70006400 0x100>; reg-shift = <2>; interrupts = <0 91 0x04>; - status = "disable"; + status = "disabled"; }; i2c@7000c000 { @@ -123,7 +123,7 @@ i2c@7000c000 { interrupts = <0 38 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c400 { @@ -132,7 +132,7 @@ i2c@7000c400 { interrupts = <0 84 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c500 { @@ -141,7 +141,7 @@ i2c@7000c500 { interrupts = <0 92 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000c700 { @@ -150,7 +150,7 @@ i2c@7000c700 { interrupts = <0 120 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; i2c@7000d000 { @@ -159,7 +159,7 @@ i2c@7000d000 { interrupts = <0 53 0x04>; #address-cells = <1>; #size-cells = <0>; - status = "disable"; + status = "disabled"; }; pmc { @@ -167,7 +167,7 @@ pmc { reg = <0x7000e400 0x400>; }; - mc { + memory-controller { compatible = "nvidia,tegra30-mc"; reg = <0x7000f000 0x010 0x7000f03c 0x1b4 @@ -201,35 +201,35 @@ tegra_i2s0: i2s@70080300 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080300 0x100>; nvidia,ahub-cif-ids = <4 4>; - status = "disable"; + status = "disabled"; }; tegra_i2s1: i2s@70080400 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080400 0x100>; nvidia,ahub-cif-ids = <5 5>; - status = "disable"; + status = "disabled"; }; tegra_i2s2: i2s@70080500 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080500 0x100>; nvidia,ahub-cif-ids = <6 6>; - status = "disable"; + status = "disabled"; }; tegra_i2s3: i2s@70080600 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080600 0x100>; nvidia,ahub-cif-ids = <7 7>; - status = "disable"; + status = "disabled"; }; tegra_i2s4: i2s@70080700 { compatible = "nvidia,tegra30-i2s"; reg = <0x70080700 0x100>; nvidia,ahub-cif-ids = <8 8>; - status = "disable"; + status = "disabled"; }; }; @@ -237,28 +237,28 @@ sdhci@78000000 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000000 0x200>; interrupts = <0 14 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000200 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000200 0x200>; interrupts = <0 15 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000400 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000400 0x200>; interrupts = <0 19 0x04>; - status = "disable"; + status = "disabled"; }; sdhci@78000600 { compatible = "nvidia,tegra30-sdhci", "nvidia,tegra20-sdhci"; reg = <0x78000600 0x200>; interrupts = <0 31 0x04>; - status = "disable"; + status = "disabled"; }; pmu { diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi index 16076e2d093410b25dd3f8e1f43e38ef57f8ffd7..d8a827bd2bf3728984621d1c45d90b640e8373db 100644 --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi @@ -55,6 +55,8 @@ ethernet@2,02000000 { reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; + vdd33a-supply = <&v2m_fixed_3v3>; + vddvario-supply = <&v2m_fixed_3v3>; }; usb@2,03000000 { @@ -157,6 +159,7 @@ v2m_timer01: timer@110000 { v2m_timer23: timer@120000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x120000 0x1000>; + interrupts = <3>; }; /* DVI I2C bus */ @@ -197,5 +200,13 @@ clcd@1f0000 { interrupts = <14>; }; }; + + v2m_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2m.dtsi b/arch/arm/boot/dts/vexpress-v2m.dtsi index a6c9c7c82d5357aee7640b6176dc71789003e364..dba53fd026bb3692ecf33d69d237a2f9356c4bd1 100644 --- a/arch/arm/boot/dts/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/vexpress-v2m.dtsi @@ -54,6 +54,8 @@ ethernet@3,02000000 { reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; + vdd33a-supply = <&v2m_fixed_3v3>; + vddvario-supply = <&v2m_fixed_3v3>; }; usb@3,03000000 { @@ -156,6 +158,7 @@ v2m_timer01: timer@11000 { v2m_timer23: timer@12000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x12000 0x1000>; + interrupts = <3>; }; /* DVI I2C bus */ @@ -196,5 +199,13 @@ clcd@1f000 { interrupts = <14>; }; }; + + v2m_fixed_3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; }; }; diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts index 7e1091d91af8b9d999b795414ebf0110c42b65c0..d12b34ca05685fd04b0c500088c74740bcacfc84 100644 --- a/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/vexpress-v2p-ca15-tc1.dts @@ -14,8 +14,8 @@ / { arm,hbi = <0x237>; compatible = "arm,vexpress,v2p-ca15,tc1", "arm,vexpress,v2p-ca15", "arm,vexpress"; interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <1>; + #address-cells = <2>; + #size-cells = <2>; chosen { }; @@ -47,23 +47,23 @@ cpu@1 { memory@80000000 { device_type = "memory"; - reg = <0x80000000 0x40000000>; + reg = <0 0x80000000 0 0x40000000>; }; hdlcd@2b000000 { compatible = "arm,hdlcd"; - reg = <0x2b000000 0x1000>; + reg = <0 0x2b000000 0 0x1000>; interrupts = <0 85 4>; }; memory-controller@2b0a0000 { compatible = "arm,pl341", "arm,primecell"; - reg = <0x2b0a0000 0x1000>; + reg = <0 0x2b0a0000 0 0x1000>; }; wdt@2b060000 { compatible = "arm,sp805", "arm,primecell"; - reg = <0x2b060000 0x1000>; + reg = <0 0x2b060000 0 0x1000>; interrupts = <98>; }; @@ -72,23 +72,23 @@ gic: interrupt-controller@2c001000 { #interrupt-cells = <3>; #address-cells = <0>; interrupt-controller; - reg = <0x2c001000 0x1000>, - <0x2c002000 0x1000>, - <0x2c004000 0x2000>, - <0x2c006000 0x2000>; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; interrupts = <1 9 0xf04>; }; memory-controller@7ffd0000 { compatible = "arm,pl354", "arm,primecell"; - reg = <0x7ffd0000 0x1000>; + reg = <0 0x7ffd0000 0 0x1000>; interrupts = <0 86 4>, <0 87 4>; }; dma@7ffb0000 { compatible = "arm,pl330", "arm,primecell"; - reg = <0x7ffb0000 0x1000>; + reg = <0 0x7ffb0000 0 0x1000>; interrupts = <0 92 4>, <0 88 4>, <0 89 4>, @@ -111,12 +111,12 @@ pmu { }; motherboard { - ranges = <0 0 0x08000000 0x04000000>, - <1 0 0x14000000 0x04000000>, - <2 0 0x18000000 0x04000000>, - <3 0 0x1c000000 0x04000000>, - <4 0 0x0c000000 0x04000000>, - <5 0 0x10000000 0x04000000>; + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; interrupt-map-mask = <0 0 63>; interrupt-map = <0 0 0 &gic 0 0 4>, diff --git a/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts new file mode 100644 index 0000000000000000000000000000000000000000..4890a81c5467e0862a9b86ad15f88e5dc0d11d47 --- /dev/null +++ b/arch/arm/boot/dts/vexpress-v2p-ca15_a7.dts @@ -0,0 +1,188 @@ +/* + * ARM Ltd. Versatile Express + * + * CoreTile Express A15x2 A7x3 + * Cortex-A15_A7 MPCore (V2P-CA15_A7) + * + * HBI-0249A + */ + +/dts-v1/; + +/ { + model = "V2P-CA15_CA7"; + arm,hbi = <0x249>; + compatible = "arm,vexpress,v2p-ca15_a7", "arm,vexpress"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { }; + + aliases { + serial0 = &v2m_serial0; + serial1 = &v2m_serial1; + serial2 = &v2m_serial2; + serial3 = &v2m_serial3; + i2c0 = &v2m_i2c_dvi; + i2c1 = &v2m_i2c_pcie; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <1>; + }; + +/* A7s disabled till big.LITTLE patches are available... + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + }; + + cpu4: cpu@4 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + }; +*/ + }; + + memory@80000000 { + device_type = "memory"; + reg = <0 0x80000000 0 0x40000000>; + }; + + wdt@2a490000 { + compatible = "arm,sp805", "arm,primecell"; + reg = <0 0x2a490000 0 0x1000>; + interrupts = <98>; + }; + + hdlcd@2b000000 { + compatible = "arm,hdlcd"; + reg = <0 0x2b000000 0 0x1000>; + interrupts = <0 85 4>; + }; + + memory-controller@2b0a0000 { + compatible = "arm,pl341", "arm,primecell"; + reg = <0 0x2b0a0000 0 0x1000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x1000>, + <0 0x2c004000 0 0x2000>, + <0 0x2c006000 0 0x2000>; + interrupts = <1 9 0xf04>; + }; + + memory-controller@7ffd0000 { + compatible = "arm,pl354", "arm,primecell"; + reg = <0 0x7ffd0000 0 0x1000>; + interrupts = <0 86 4>, + <0 87 4>; + }; + + dma@7ff00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0 0x7ff00000 0 0x1000>; + interrupts = <0 92 4>, + <0 88 4>, + <0 89 4>, + <0 90 4>, + <0 91 4>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + pmu { + compatible = "arm,cortex-a15-pmu", "arm,cortex-a9-pmu"; + interrupts = <0 68 4>, + <0 69 4>; + }; + + motherboard { + ranges = <0 0 0 0x08000000 0x04000000>, + <1 0 0 0x14000000 0x04000000>, + <2 0 0 0x18000000 0x04000000>, + <3 0 0 0x1c000000 0x04000000>, + <4 0 0 0x0c000000 0x04000000>, + <5 0 0 0x10000000 0x04000000>; + + interrupt-map-mask = <0 0 63>; + interrupt-map = <0 0 0 &gic 0 0 4>, + <0 0 1 &gic 0 1 4>, + <0 0 2 &gic 0 2 4>, + <0 0 3 &gic 0 3 4>, + <0 0 4 &gic 0 4 4>, + <0 0 5 &gic 0 5 4>, + <0 0 6 &gic 0 6 4>, + <0 0 7 &gic 0 7 4>, + <0 0 8 &gic 0 8 4>, + <0 0 9 &gic 0 9 4>, + <0 0 10 &gic 0 10 4>, + <0 0 11 &gic 0 11 4>, + <0 0 12 &gic 0 12 4>, + <0 0 13 &gic 0 13 4>, + <0 0 14 &gic 0 14 4>, + <0 0 15 &gic 0 15 4>, + <0 0 16 &gic 0 16 4>, + <0 0 17 &gic 0 17 4>, + <0 0 18 &gic 0 18 4>, + <0 0 19 &gic 0 19 4>, + <0 0 20 &gic 0 20 4>, + <0 0 21 &gic 0 21 4>, + <0 0 22 &gic 0 22 4>, + <0 0 23 &gic 0 23 4>, + <0 0 24 &gic 0 24 4>, + <0 0 25 &gic 0 25 4>, + <0 0 26 &gic 0 26 4>, + <0 0 27 &gic 0 27 4>, + <0 0 28 &gic 0 28 4>, + <0 0 29 &gic 0 29 4>, + <0 0 30 &gic 0 30 4>, + <0 0 31 &gic 0 31 4>, + <0 0 32 &gic 0 32 4>, + <0 0 33 &gic 0 33 4>, + <0 0 34 &gic 0 34 4>, + <0 0 35 &gic 0 35 4>, + <0 0 36 &gic 0 36 4>, + <0 0 37 &gic 0 37 4>, + <0 0 38 &gic 0 38 4>, + <0 0 39 &gic 0 39 4>, + <0 0 40 &gic 0 40 4>, + <0 0 41 &gic 0 41 4>, + <0 0 42 &gic 0 42 4>; + }; +}; + +/include/ "vexpress-v2m-rs1.dtsi" diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..e40b435d204e85f12d41cfc2bd5b43f84f99354e --- /dev/null +++ b/arch/arm/configs/exynos_defconfig @@ -0,0 +1,92 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_KALLSYMS_ALL=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_BLK_DEV_BSG is not set +CONFIG_PARTITION_ADVANCED=y +CONFIG_EFI_PARTITION=y +CONFIG_ARCH_EXYNOS=y +CONFIG_S3C_LOWLEVEL_UART_PORT=1 +CONFIG_S3C24XX_PWM=y +CONFIG_ARCH_EXYNOS5=y +CONFIG_MACH_EXYNOS4_DT=y +CONFIG_MACH_EXYNOS5_DT=y +CONFIG_SMP=y +CONFIG_NR_CPUS=2 +CONFIG_PREEMPT=y +CONFIG_AEABI=y +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_INET=y +CONFIG_RFKILL_REGULATOR=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y +CONFIG_CHR_DEV_SG=y +CONFIG_NETDEVICES=y +CONFIG_SMSC911X=y +CONFIG_USB_USBNET=y +CONFIG_USB_NET_SMSC75XX=y +CONFIG_USB_NET_SMSC95XX=y +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_HW_RANDOM=y +CONFIG_I2C=y +# CONFIG_HWMON is not set +CONFIG_MFD_TPS65090=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_TPS65090=y +CONFIG_FB=y +CONFIG_EXYNOS_VIDEO=y +CONFIG_EXYNOS_MIPI_DSI=y +CONFIG_EXYNOS_DP=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_FONT_7x14=y +CONFIG_LOGO=y +CONFIG_USB=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +CONFIG_CRAMFS=y +CONFIG_ROMFS_FS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ASCII=y +CONFIG_NLS_ISO8859_1=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_KERNEL=y +CONFIG_DETECT_HUNG_TASK=y +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y +CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index e05a2f1665a78c1b6929271aed7b69a054247ef3..78ed575feb1abac028168ab3ab847694165c68c2 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -2,7 +2,10 @@ CONFIG_EXPERIMENTAL=y # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y CONFIG_EXPERT=y # CONFIG_COMPAT_BRK is not set CONFIG_SLAB=y @@ -36,8 +39,6 @@ CONFIG_MACH_IMX27IPCAM=y CONFIG_MACH_IMX27_DT=y CONFIG_MXC_IRQ_PRIOR=y CONFIG_MXC_PWM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -46,7 +47,6 @@ CONFIG_FPE_NWFPE=y CONFIG_FPE_NWFPE_XP=y CONFIG_PM_DEBUG=y CONFIG_NET=y -CONFIG_SMSC911X=y CONFIG_PACKET=y CONFIG_UNIX=y CONFIG_INET=y @@ -70,31 +70,31 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_ADV_OPTIONS=y CONFIG_MTD_CFI_GEOMETRY=y # CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_CFI_I2 is not set CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_MXC=y CONFIG_MTD_UBI=y -CONFIG_MISC_DEVICES=y CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y +CONFIG_ATA=y +CONFIG_PATA_IMX=y CONFIG_NETDEVICES=y CONFIG_CS89x0=y CONFIG_CS89x0_PLATFORM=y CONFIG_DM9000=y CONFIG_SMC91X=y CONFIG_SMC911X=y +CONFIG_SMSC911X=y CONFIG_SMSC_PHY=y # CONFIG_INPUT_MOUSEDEV is not set CONFIG_INPUT_EVDEV=y -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_KEYBOARD_IMX=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_ADS7846=m -CONFIG_TOUCHSCREEN_MC13783=m -# CONFIG_SERIO is not set +CONFIG_TOUCHSCREEN_MC13783=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=m CONFIG_SERIAL_IMX=y @@ -113,31 +113,23 @@ CONFIG_HWMON=m CONFIG_SENSORS_MC13783_ADC=m CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y -CONFIG_MFD_MC13XXX=y +CONFIG_MFD_MC13XXX_SPI=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y -CONFIG_FB=y -CONFIG_FB_IMX=y -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=y -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_LCD_L4F00242T03=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEO_MEDIA=y -CONFIG_VIDEO_V4L2=y -CONFIG_VIDEOBUF_GEN=y -CONFIG_VIDEOBUF_DMA_CONTIG=y -CONFIG_VIDEOBUF2_CORE=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y -CONFIG_VIDEO_MX2_HOSTSUPPORT=y CONFIG_VIDEO_MX2=y +CONFIG_FB=y +CONFIG_FB_IMX=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_LCD_L4F00242T03=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_PWM=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y @@ -152,13 +144,17 @@ CONFIG_SND_IMX_SOC=y CONFIG_SND_SOC_MX27VIS_AIC32X4=y CONFIG_SND_SOC_PHYCORE_AC97=y CONFIG_SND_SOC_EUKREA_TLV320=y +CONFIG_SND_SOC_IMX_SGTL5000=y +CONFIG_SND_SOC_IMX_MC13783=y CONFIG_USB_HID=m CONFIG_USB=y -# CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y CONFIG_USB_ULPI=y CONFIG_MMC=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SDHCI_ESDHC_IMX=y CONFIG_MMC_MXC=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -173,22 +169,25 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_IMXDI=y +CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y CONFIG_IMX_DMA=y +CONFIG_COMMON_CLK_DEBUG=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set # CONFIG_PROC_PAGE_MONITOR is not set CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_UBIFS_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=m CONFIG_NLS_CODEPAGE_850=m CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=m -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_CRYPTO_ANSI_CPRNG is not set diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index b1d3675df72cd2c8abb336e05cd01854b9fe7918..f725b9637b3374a4079c17ca50823f064ea0bb6d 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -2,6 +2,8 @@ CONFIG_EXPERIMENTAL=y # CONFIG_LOCALVERSION_AUTO is not set CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=18 CONFIG_CGROUPS=y CONFIG_RELAY=y @@ -29,15 +31,12 @@ CONFIG_MACH_MX35_3DS=y CONFIG_MACH_VPR200=y CONFIG_MACH_IMX51_DT=y CONFIG_MACH_MX51_3DS=y -CONFIG_MACH_EUKREA_CPUIMX51=y CONFIG_MACH_EUKREA_CPUIMX51SD=y CONFIG_MACH_MX51_EFIKAMX=y CONFIG_MACH_MX51_EFIKASB=y CONFIG_MACH_IMX53_DT=y CONFIG_SOC_IMX6Q=y CONFIG_MXC_PWM=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y @@ -64,17 +63,29 @@ CONFIG_IPV6=y # CONFIG_WIRELESS is not set CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y +# CONFIG_STANDALONE is not set +CONFIG_CONNECTOR=y CONFIG_MTD=y -CONFIG_MTD_OF_PARTS=y +CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +CONFIG_MTD_CFI_STAA=y CONFIG_MTD_DATAFLASH=y CONFIG_MTD_M25P80=y CONFIG_MTD_SST25L=y -# CONFIG_STANDALONE is not set -CONFIG_CONNECTOR=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_GPMI_NAND=y +CONFIG_MTD_NAND_MXC=y +CONFIG_MTD_UBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=65536 +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_AT25=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_SCSI_MULTI_LUN=y @@ -105,8 +116,11 @@ CONFIG_SMSC911X=y CONFIG_INPUT_EVDEV=y CONFIG_INPUT_EVBUG=m CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_IMX=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_MC13783=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MMA8450=y CONFIG_SERIO_SERPORT=m @@ -116,6 +130,7 @@ CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_SERIAL_IMX=y CONFIG_SERIAL_IMX_CONSOLE=y CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_MXC_RNGA=y CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set CONFIG_I2C_CHARDEV=y @@ -130,42 +145,37 @@ CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y -CONFIG_MFD_MC13XXX=y +CONFIG_MFD_MC13XXX_SPI=y +CONFIG_MFD_MC13XXX_I2C=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_MC13783=y CONFIG_REGULATOR_MC13892=y CONFIG_MEDIA_SUPPORT=y -CONFIG_VIDEO_V4L2=y CONFIG_VIDEO_DEV=y -CONFIG_VIDEO_V4L2_COMMON=y -CONFIG_VIDEOBUF_GEN=y -CONFIG_VIDEOBUF2_CORE=y -CONFIG_VIDEOBUF2_MEMOPS=y -CONFIG_VIDEOBUF2_DMA_CONTIG=y -CONFIG_VIDEO_CAPTURE_DRIVERS=y CONFIG_V4L_PLATFORM_DRIVERS=y CONFIG_SOC_CAMERA=y CONFIG_SOC_CAMERA_OV2640=y -CONFIG_MX3_VIDEO=y CONFIG_VIDEO_MX3=y CONFIG_FB=y -CONFIG_FB_MX3=y CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y CONFIG_LCD_L4F00242T03=y CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=y -CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FONTS=y CONFIG_FONT_8x8=y CONFIG_FONT_8x16=y CONFIG_LOGO=y -CONFIG_LOGO_LINUX_MONO=y -CONFIG_LOGO_LINUX_VGA16=y -CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_IMX_SOC=y +CONFIG_SND_SOC_PHYCORE_AC97=y +CONFIG_SND_SOC_EUKREA_TLV320=y +CONFIG_SND_SOC_IMX_SGTL5000=y +CONFIG_SND_SOC_IMX_MC13783=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y @@ -178,9 +188,12 @@ CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_RTC_CLASS=y CONFIG_RTC_INTF_DEV_UIE_EMUL=y +CONFIG_RTC_DRV_MC13XXX=y CONFIG_RTC_DRV_MXC=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y +CONFIG_COMMON_CLK_DEBUG=y +# CONFIG_IOMMU_SUPPORT is not set CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -204,8 +217,9 @@ CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_CONFIGFS_FS=m +CONFIG_JFFS2_FS=y +CONFIG_UBIFS_FS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_ROOT_NFS=y @@ -216,14 +230,11 @@ CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=y CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_FS=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_FTRACE is not set # CONFIG_ARM_UNWIND is not set CONFIG_SECURITYFS=y -CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_LZO=m # CONFIG_CRYPTO_ANSI_CPRNG is not set # CONFIG_CRYPTO_HW is not set CONFIG_CRC_CCITT=m diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index 4fa60547494ad7f160d5b512de2edbe17cd43a77..e42a0e3d4c3a6466375e492eaf5759c0cc0bff30 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -1,5 +1,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 @@ -16,8 +18,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_LPC32XX=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y +CONFIG_KEYBOARD_GPIO_POLLED=y CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 @@ -52,13 +53,17 @@ CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y +CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_MUSEUM_IDS=y +CONFIG_MTD_NAND_SLC_LPC32XX=y +CONFIG_MTD_NAND_MLC_LPC32XX=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=1 CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_EEPROM_AT24=y CONFIG_EEPROM_AT25=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y @@ -79,16 +84,23 @@ CONFIG_LPC_ENET=y # CONFIG_NET_VENDOR_STMICRO is not set CONFIG_SMSC_PHY=y # CONFIG_WLAN is not set +CONFIG_INPUT_MATRIXKMAP=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set CONFIG_INPUT_MOUSEDEV_SCREEN_X=240 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320 CONFIG_INPUT_EVDEV=y +# CONFIG_KEYBOARD_ATKBD is not set +CONFIG_KEYBOARD_GPIO=y +CONFIG_KEYBOARD_LPC32XX=y # CONFIG_INPUT_MOUSE is not set CONFIG_INPUT_TOUCHSCREEN=y CONFIG_TOUCHSCREEN_LPC32XX=y +CONFIG_SERIO_LIBPS2=y # CONFIG_LEGACY_PTYS is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_HS_LPC32XX=y +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y CONFIG_I2C_CHARDEV=y @@ -96,7 +108,8 @@ CONFIG_I2C_PNX=y CONFIG_SPI=y CONFIG_SPI_PL022=y CONFIG_GPIO_SYSFS=y -# CONFIG_HWMON is not set +CONFIG_SENSORS_DS620=y +CONFIG_SENSORS_MAX6639=y CONFIG_WATCHDOG=y CONFIG_PNX4008_WATCHDOG=y CONFIG_FB=y @@ -133,6 +146,8 @@ CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y +CONFIG_LEDS_PCA9532=y +CONFIG_LEDS_PCA9532_GPIO=y CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y @@ -146,10 +161,10 @@ CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_LPC32XX=y CONFIG_DMADEVICES=y -CONFIG_AMBA_PL08X=y CONFIG_STAGING=y -CONFIG_IIO=y CONFIG_LPC32XX_ADC=y +CONFIG_MAX517=y +CONFIG_IIO=y CONFIG_EXT2_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y @@ -159,7 +174,6 @@ CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_WBUF_VERIFY=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..2e86b31c33cf1cab3afe20243c085e26104e574a --- /dev/null +++ b/arch/arm/configs/mvebu_defconfig @@ -0,0 +1,46 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_BLK_DEV_INITRD=y +CONFIG_EXPERT=y +CONFIG_SLAB=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +CONFIG_ARCH_MVEBU=y +CONFIG_MACH_ARMADA_370_XP=y +CONFIG_AEABI=y +CONFIG_HIGHMEM=y +CONFIG_USE_OF=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_VFP=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_EXT2_FS=y +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_ISO9660_FS=y +CONFIG_JOLIET=y +CONFIG_UDF_FS=m +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_TMPFS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_CODEPAGE_850=y +CONFIG_NLS_ISO8859_1=y +CONFIG_NLS_ISO8859_2=y +CONFIG_NLS_UTF8=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DEBUG_FS=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_TIMER_STATS=y +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_DEBUG_INFO=y +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_LL=y +CONFIG_EARLY_PRINTK=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 5406c23a02e3b2dafa323300222690094f38326d..ccdb6357fb74065e017d44527a27e8c2c7a3f46d 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -28,6 +28,7 @@ CONFIG_MACH_MX28EVK=y CONFIG_MACH_STMP378X_DEVB=y CONFIG_MACH_TX28=y CONFIG_MACH_M28EVK=y +CONFIG_MACH_APX4DEVKIT=y # CONFIG_ARM_THUMB is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y @@ -58,6 +59,9 @@ CONFIG_CAN_FLEXCAN=m CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set # CONFIG_BLK_DEV is not set +CONFIG_MTD=y +CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_ENC28J60=y @@ -77,6 +81,7 @@ CONFIG_DEVPTS_MULTIPLE_INSTANCES=y # CONFIG_DEVKMEM is not set CONFIG_SERIAL_AMBA_PL011=y CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_MXS_AUART=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set @@ -109,8 +114,10 @@ CONFIG_MMC=y CONFIG_MMC_MXS=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=m +CONFIG_RTC_DRV_STMP=y CONFIG_DMADEVICES=y CONFIG_MXS_DMA=y +CONFIG_COMMON_CLK_DEBUG=y CONFIG_EXT3_FS=y # CONFIG_DNOTIFY is not set CONFIG_FSCACHE=m diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 9854ff4279e0891bfaaa59d8086df7ee247c5003..b152de79fd95373e2f6fd8e34e66a4c360463c3b 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -176,7 +176,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y CONFIG_USB_DEVICEFS=y CONFIG_USB_SUSPEND=y CONFIG_USB_MON=y -CONFIG_USB_EHCI_HCD=y CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_USB_LIBUSUAL=y @@ -197,6 +196,7 @@ CONFIG_RTC_DRV_TWL4030=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set +CONFIG_EXT4_FS=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y CONFIG_MSDOS_FS=y @@ -236,3 +236,4 @@ CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=y CONFIG_CRC7=y CONFIG_LIBCRC32C=y +CONFIG_SOC_OMAP5=y diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig new file mode 100644 index 0000000000000000000000000000000000000000..0ac1293dba102dce226b510d2aca075558e16cfe --- /dev/null +++ b/arch/arm/configs/socfpga_defconfig @@ -0,0 +1,83 @@ +CONFIG_EXPERIMENTAL=y +CONFIG_SYSVIPC=y +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_CGROUPS=y +CONFIG_CPUSETS=y +CONFIG_NAMESPACES=y +CONFIG_EMBEDDED=y +CONFIG_PROFILING=y +CONFIG_OPROFILE=y +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_LBDAF is not set +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +CONFIG_ARCH_SOCFPGA=y +CONFIG_MACH_SOCFPGA_CYCLONE5=y +CONFIG_ARM_THUMBEE=y +# CONFIG_CACHE_L2X0 is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_VMSPLIT_2G=y +CONFIG_NR_CPUS=2 +CONFIG_AEABI=y +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_CMDLINE="" +CONFIG_VFP=y +CONFIG_NEON=y +CONFIG_NET=y +CONFIG_PACKET=y +CONFIG_UNIX=y +CONFIG_NET_KEY=y +CONFIG_NET_KEY_MIGRATE=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_IP_PNP_RARP=y +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_PROC_DEVICETREE=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=2 +CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_SCSI=y +# CONFIG_SCSI_PROC_FS is not set +CONFIG_BLK_DEV_SD=y +# CONFIG_SCSI_LOWLEVEL is not set +CONFIG_NETDEVICES=y +CONFIG_STMMAC_ETH=y +# CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_SERIO_SERPORT is not set +CONFIG_SERIO_AMBAKMI=y +CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_NR_UARTS=2 +CONFIG_SERIAL_8250_RUNTIME_UARTS=2 +CONFIG_SERIAL_8250_DW=y +# CONFIG_RTC_HCTOSYS is not set +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +CONFIG_EXT2_FS_POSIX_ACL=y +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY_USER is not set +CONFIG_VFAT_FS=y +CONFIG_NTFS_FS=y +CONFIG_NTFS_RW=y +CONFIG_TMPFS=y +CONFIG_JFFS2_FS=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y +CONFIG_MAGIC_SYSRQ=y +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_SCHED_DEBUG is not set +CONFIG_DEBUG_INFO=y +CONFIG_ENABLE_DEFAULT_TRACERS=y +CONFIG_DEBUG_USER=y +CONFIG_XZ_DEC=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 1198dd61c7c49e6b1035082db78f77d09846bbbf..4be9c1e80ee63aac2c5d8239222ec1dcf147e683 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -1,4 +1,6 @@ CONFIG_EXPERIMENTAL=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_CGROUPS=y @@ -25,14 +27,9 @@ CONFIG_ARCH_TEGRA=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_MACH_HARMONY=y -CONFIG_MACH_KAEN=y CONFIG_MACH_PAZ00=y CONFIG_MACH_TRIMSLICE=y -CONFIG_MACH_WARIO=y -CONFIG_MACH_VENTANA=y CONFIG_TEGRA_EMC_SCALING_ENABLE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y @@ -103,19 +100,24 @@ CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set +CONFIG_I2C_MUX=y +CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_TEGRA=y CONFIG_SPI=y CONFIG_SPI_TEGRA=y +CONFIG_GPIO_TPS65910=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_SBS=y CONFIG_SENSORS_LM90=y CONFIG_MFD_TPS6586X=y +CONFIG_MFD_TPS65910=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_TPS62360=y CONFIG_REGULATOR_TPS6586X=y +CONFIG_REGULATOR_TPS65910=y CONFIG_SOUND=y CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set @@ -126,6 +128,7 @@ CONFIG_SND=y # CONFIG_SND_USB is not set CONFIG_SND_SOC=y CONFIG_SND_SOC_TEGRA=y +CONFIG_SND_SOC_TEGRA_WM8753=y CONFIG_SND_SOC_TEGRA_WM8903=y CONFIG_SND_SOC_TEGRA_TRIMSLICE=y CONFIG_SND_SOC_TEGRA_ALC5632=y diff --git a/arch/arm/include/asm/atomic.h b/arch/arm/include/asm/atomic.h index 68374ba6a943e9d029246d927b64a52913ea525e..c79f61faa3a55e81ae773b6d9d83532821b24c33 100644 --- a/arch/arm/include/asm/atomic.h +++ b/arch/arm/include/asm/atomic.h @@ -243,7 +243,7 @@ typedef struct { #define ATOMIC64_INIT(i) { (i) } -static inline u64 atomic64_read(atomic64_t *v) +static inline u64 atomic64_read(const atomic64_t *v) { u64 result; diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h index 3d2220498abc2db2d98378c94a3309c71e91ccee..6ddbe446425e11524d927b5cd8b479bcd2419238 100644 --- a/arch/arm/include/asm/domain.h +++ b/arch/arm/include/asm/domain.h @@ -60,13 +60,13 @@ #ifndef __ASSEMBLY__ #ifdef CONFIG_CPU_USE_DOMAINS -#define set_domain(x) \ - do { \ - __asm__ __volatile__( \ - "mcr p15, 0, %0, c3, c0 @ set domain" \ - : : "r" (x)); \ - isb(); \ - } while (0) +static inline void set_domain(unsigned val) +{ + asm volatile( + "mcr p15, 0, %0, c3, c0 @ set domain" + : : "r" (val)); + isb(); +} #define modify_domain(dom,type) \ do { \ @@ -78,8 +78,8 @@ } while (0) #else -#define set_domain(x) do { } while (0) -#define modify_domain(dom,type) do { } while (0) +static inline void set_domain(unsigned val) { } +static inline void modify_domain(unsigned dom, unsigned type) { } #endif /* diff --git a/arch/arm/include/asm/mach/irq.h b/arch/arm/include/asm/mach/irq.h index febe495d0c6e15777b9e393a50cc08d7fbdd917c..15cb035309f754ca4c5b3e4c4fa718e6a27252ac 100644 --- a/arch/arm/include/asm/mach/irq.h +++ b/arch/arm/include/asm/mach/irq.h @@ -17,7 +17,7 @@ struct seq_file; /* * This is internal. Do not use it. */ -extern void init_FIQ(void); +extern void init_FIQ(int); extern int show_fiq_list(struct seq_file *, int); #ifdef CONFIG_MULTI_IRQ_HANDLER diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index b79f8e97f7755f22d82ae20ee00442cd11f7af02..af7b0bda3355d9af850ae722b2b1f55277ef6e67 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -148,7 +148,6 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_SYSCALL_TRACE 8 #define TIF_SYSCALL_AUDIT 9 -#define TIF_SYSCALL_RESTARTSYS 10 #define TIF_POLLING_NRFLAG 16 #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ @@ -164,11 +163,9 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) -#define _TIF_SYSCALL_RESTARTSYS (1 << TIF_SYSCALL_RESTARTSYS) /* Checks for any syscall work in entry-common.S */ -#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \ - _TIF_SYSCALL_RESTARTSYS) +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT) /* * Change these and you break ASM code in entry-common.S diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index 25552508c3fd3c63930cec55893c41dcbbd72b0d..2b2f25e7fef5f07f545f8f5f0b9866a945a9026a 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -253,7 +253,7 @@ static void __devinit pci_fixup_cy82c693(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693); -static void __init pci_fixup_it8152(struct pci_dev *dev) +static void __devinit pci_fixup_it8152(struct pci_dev *dev) { int i; /* fixup for ITE 8152 devices */ @@ -461,7 +461,7 @@ static void __init pcibios_init_hw(struct hw_pci *hw, struct list_head *head) if (!sys->bus) panic("PCI: unable to scan bus!"); - busnr = sys->bus->subordinate + 1; + busnr = sys->bus->busn_res.end + 1; list_add(&sys->node, head); } else { diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c index c32f8456aa094115b8c28a92df83fc643a15188c..2adda11f712fe02fa2fdaa63e944e17199bd3748 100644 --- a/arch/arm/kernel/fiq.c +++ b/arch/arm/kernel/fiq.c @@ -122,14 +122,16 @@ void release_fiq(struct fiq_handler *f) while (current_fiq->fiq_op(current_fiq->dev_id, 0)); } +static int fiq_start; + void enable_fiq(int fiq) { - enable_irq(fiq + FIQ_START); + enable_irq(fiq + fiq_start); } void disable_fiq(int fiq) { - disable_irq(fiq + FIQ_START); + disable_irq(fiq + fiq_start); } EXPORT_SYMBOL(set_fiq_handler); @@ -140,7 +142,8 @@ EXPORT_SYMBOL(release_fiq); EXPORT_SYMBOL(enable_fiq); EXPORT_SYMBOL(disable_fiq); -void __init init_FIQ(void) +void __init init_FIQ(int start) { no_fiq_insn = *(unsigned long *)0xffff001c; + fiq_start = start; } diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 8349d4e97e2b8b9b7bb5672b2cf974c2cdb74fd0..16cedb42c0c39c0169008e45488b279cd9b32821 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -40,13 +40,6 @@ #include #include -/* - * No architecture-specific irq_finish function defined in arm/arch/irqs.h. - */ -#ifndef irq_finish -#define irq_finish(irq) do { } while (0) -#endif - unsigned long irq_err_count; int arch_show_interrupts(struct seq_file *p, int prec) @@ -85,9 +78,6 @@ void handle_IRQ(unsigned int irq, struct pt_regs *regs) generic_handle_irq(irq); } - /* AT91 specific workaround */ - irq_finish(irq); - irq_exit(); set_irq_regs(old_regs); } diff --git a/arch/arm/kernel/kprobes-test-arm.c b/arch/arm/kernel/kprobes-test-arm.c index ba32b393b3f0c514c83799687348d52655bfe1da..38c1a3b103a0684b5b579bb74ca07f38bb91eb13 100644 --- a/arch/arm/kernel/kprobes-test-arm.c +++ b/arch/arm/kernel/kprobes-test-arm.c @@ -187,8 +187,8 @@ void kprobe_arm_test_cases(void) TEST_BF_R ("mov pc, r",0,2f,"") TEST_BF_RR("mov pc, r",0,2f,", asl r",1,0,"") TEST_BB( "sub pc, pc, #1b-2b+8") -#if __LINUX_ARM_ARCH__ >= 6 - TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before ARMv6 */ +#if __LINUX_ARM_ARCH__ == 6 && !defined(CONFIG_CPU_V7) + TEST_BB( "sub pc, pc, #1b-2b+8-2") /* UNPREDICTABLE before and after ARMv6 */ #endif TEST_BB_R( "sub pc, pc, r",14, 1f-2f+8,"") TEST_BB_R( "rsb pc, r",14,1f-2f+8,", pc") diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 186c8cb982c543a2cc1631796b34376151b33702..a02eada3aa5d06036027ac1241e652d5032781bd 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -503,7 +503,7 @@ __hw_perf_event_init(struct perf_event *event) event_requires_mode_exclusion(&event->attr)) { pr_debug("ARM performance counters do not support " "mode exclusion\n"); - return -EPERM; + return -EOPNOTSUPP; } /* diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 5700a7ae7f0bc1511ae048d7a3f025c401e5729c..14e38261cd31db9d852db2eb0b8046251a04613d 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -25,7 +25,6 @@ #include #include #include -#include #include #include @@ -918,8 +917,6 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno) audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); - if (why == 0 && test_and_clear_thread_flag(TIF_SYSCALL_RESTARTSYS)) - scno = __NR_restart_syscall - __NR_SYSCALL_BASE; if (!test_thread_flag(TIF_SYSCALL_TRACE)) return scno; diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index fd2392a17ac1befb3464b5a0e77960a0f862b4ca..536c5d6b340b7fca2aee9c770000372c38be98bb 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -27,6 +27,7 @@ */ #define SWI_SYS_SIGRETURN (0xef000000|(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)) #define SWI_SYS_RT_SIGRETURN (0xef000000|(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)) +#define SWI_SYS_RESTART (0xef000000|__NR_restart_syscall|__NR_OABI_SYSCALL_BASE) /* * With EABI, the syscall number has to be loaded into r7. @@ -46,6 +47,18 @@ const unsigned long sigreturn_codes[7] = { MOV_R7_NR_RT_SIGRETURN, SWI_SYS_RT_SIGRETURN, SWI_THUMB_RT_SIGRETURN, }; +/* + * Either we support OABI only, or we have EABI with the OABI + * compat layer enabled. In the later case we don't know if + * user space is EABI or not, and if not we must not clobber r7. + * Always using the OABI syscall solves that issue and works for + * all those cases. + */ +const unsigned long syscall_restart_code[2] = { + SWI_SYS_RESTART, /* swi __NR_restart_syscall */ + 0xe49df004, /* ldr pc, [sp], #4 */ +}; + /* * atomically swap in the new signal mask, and wait for a signal. */ @@ -592,10 +605,12 @@ static void do_signal(struct pt_regs *regs, int syscall) case -ERESTARTNOHAND: case -ERESTARTSYS: case -ERESTARTNOINTR: - case -ERESTART_RESTARTBLOCK: regs->ARM_r0 = regs->ARM_ORIG_r0; regs->ARM_pc = restart_addr; break; + case -ERESTART_RESTARTBLOCK: + regs->ARM_r0 = -EINTR; + break; } } @@ -611,14 +626,12 @@ static void do_signal(struct pt_regs *regs, int syscall) * debugger has chosen to restart at a different PC. */ if (regs->ARM_pc == restart_addr) { - if (retval == -ERESTARTNOHAND || - retval == -ERESTART_RESTARTBLOCK + if (retval == -ERESTARTNOHAND || (retval == -ERESTARTSYS && !(ka.sa.sa_flags & SA_RESTART))) { regs->ARM_r0 = -EINTR; regs->ARM_pc = continue_addr; } - clear_thread_flag(TIF_SYSCALL_RESTARTSYS); } handle_signal(signr, &ka, &info, regs); @@ -632,8 +645,29 @@ static void do_signal(struct pt_regs *regs, int syscall) * ignore the restart. */ if (retval == -ERESTART_RESTARTBLOCK - && regs->ARM_pc == restart_addr) - set_thread_flag(TIF_SYSCALL_RESTARTSYS); + && regs->ARM_pc == continue_addr) { + if (thumb_mode(regs)) { + regs->ARM_r7 = __NR_restart_syscall - __NR_SYSCALL_BASE; + regs->ARM_pc -= 2; + } else { +#if defined(CONFIG_AEABI) && !defined(CONFIG_OABI_COMPAT) + regs->ARM_r7 = __NR_restart_syscall; + regs->ARM_pc -= 4; +#else + u32 __user *usp; + + regs->ARM_sp -= 4; + usp = (u32 __user *)regs->ARM_sp; + + if (put_user(regs->ARM_pc, usp) == 0) { + regs->ARM_pc = KERN_RESTART_CODE; + } else { + regs->ARM_sp += 4; + force_sigsegv(0, current); + } +#endif + } + } } restore_saved_sigmask(); diff --git a/arch/arm/kernel/signal.h b/arch/arm/kernel/signal.h index 5ff067b7c7522f428b4343832ecb759b7ccf16de..6fcfe8398aa473051fbf72396986a84dc700978f 100644 --- a/arch/arm/kernel/signal.h +++ b/arch/arm/kernel/signal.h @@ -8,5 +8,7 @@ * published by the Free Software Foundation. */ #define KERN_SIGRETURN_CODE (CONFIG_VECTORS_BASE + 0x00000500) +#define KERN_RESTART_CODE (KERN_SIGRETURN_CODE + sizeof(sigreturn_codes)) extern const unsigned long sigreturn_codes[7]; +extern const unsigned long syscall_restart_code[2]; diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 4928d89758f4ce0dea767acdf9fcf2299dff7833..3647170e9a16ba3aa8838218ed99e74dbc5b7c59 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -820,6 +820,8 @@ void __init early_trap_init(void *vectors_base) */ memcpy((void *)(vectors + KERN_SIGRETURN_CODE - CONFIG_VECTORS_BASE), sigreturn_codes, sizeof(sigreturn_codes)); + memcpy((void *)(vectors + KERN_RESTART_CODE - CONFIG_VECTORS_BASE), + syscall_restart_code, sizeof(syscall_restart_code)); flush_icache_range(vectors, vectors + PAGE_SIZE); modify_domain(DOMAIN_USER, DOMAIN_CLIENT); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 43a31fb06318dc0a1213827a5069b73cac19f5a6..36ff15bbfdd4961afecfef9ea292c6445e9b3836 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -183,7 +183,9 @@ SECTIONS } #endif +#ifdef CONFIG_SMP PERCPU_SECTION(L1_CACHE_BYTES) +#endif #ifdef CONFIG_XIP_KERNEL __data_loc = ALIGN(4); /* location in binary */ diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 19505c0a3f018225dcdc4935e089024e8d03d670..c8050b14e615ef0df3adbee08598b7aaf30a60ff 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -29,12 +29,16 @@ comment "Atmel AT91 Processor" config SOC_AT91SAM9 bool select CPU_ARM926T + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select AT91_SAM9_TIME select AT91_SAM9_SMC config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 @@ -140,6 +144,8 @@ config ARCH_AT91SAM9G45 config ARCH_AT91X40 bool "AT91x40" depends on !MMU + select MULTI_IRQ_HANDLER + select SPARSE_IRQ select ARCH_USES_GETTIMEOFFSET endchoice diff --git a/arch/arm/mach-at91/Makefile.boot b/arch/arm/mach-at91/Makefile.boot index 9e84fe4f2aaa00b2c23107f1e58a949afa7e68bb..30bb7332e30b99a8d45a7c20ed10d9f26ce4e9f2 100644 --- a/arch/arm/mach-at91/Makefile.boot +++ b/arch/arm/mach-at91/Makefile.boot @@ -15,7 +15,9 @@ endif # Keep dtb files sorted alphabetically for each SoC # sam9260 +dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb +dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb # sam9263 diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 26917687fc30fd6b981181b79d8d338719d95305..6f50c6722276dcc73f8607b51132bfe40dd077b9 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index e6b7d0533dd75dad4f6cee4f3458a2a6ddda6581..01fb7325fecce0ef9a015835ff846655b3b4af11 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -41,8 +41,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_UHP, - .end = AT91RM9200_ID_UHP, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_UHP, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -94,8 +94,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_UDP, - .end = AT91RM9200_ID_UDP, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_UDP, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -145,8 +145,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_EMAC, - .end = AT91RM9200_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -305,8 +305,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_MCI, - .end = AT91RM9200_ID_MCI, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_MCI, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -488,8 +488,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_TWI, - .end = AT91RM9200_ID_TWI, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TWI, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -532,8 +532,8 @@ static struct resource spi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SPI, - .end = AT91RM9200_ID_SPI, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SPI, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SPI, .flags = IORESOURCE_IRQ, }, }; @@ -598,18 +598,18 @@ static struct resource tcb0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_TC0, - .end = AT91RM9200_ID_TC0, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC0, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91RM9200_ID_TC1, - .end = AT91RM9200_ID_TC1, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC1, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91RM9200_ID_TC2, - .end = AT91RM9200_ID_TC2, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC2, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -628,18 +628,18 @@ static struct resource tcb1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_TC3, - .end = AT91RM9200_ID_TC3, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC3, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC3, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91RM9200_ID_TC4, - .end = AT91RM9200_ID_TC4, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC4, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC4, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91RM9200_ID_TC5, - .end = AT91RM9200_ID_TC5, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC5, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC5, .flags = IORESOURCE_IRQ, }, }; @@ -673,8 +673,8 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -729,8 +729,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SSC0, - .end = AT91RM9200_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -771,8 +771,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SSC1, - .end = AT91RM9200_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -813,8 +813,8 @@ static struct resource ssc2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_SSC2, - .end = AT91RM9200_ID_SSC2, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC2, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC2, .flags = IORESOURCE_IRQ, }, }; @@ -897,8 +897,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -935,8 +935,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US0, - .end = AT91RM9200_ID_US0, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US0, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -984,8 +984,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US1, - .end = AT91RM9200_ID_US1, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US1, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1035,8 +1035,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US2, - .end = AT91RM9200_ID_US2, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US2, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1078,8 +1078,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91RM9200_ID_US3, - .end = AT91RM9200_ID_US3, + .start = NR_IRQS_LEGACY + AT91RM9200_ID_US3, + .end = NR_IRQS_LEGACY + AT91RM9200_ID_US3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 2b1e438ed87869320362678421486dc0caa058fd..30c7f26a4668c34e3739955a782ef3ec2befb978 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index 0ded951f785af1f31c7cba305f191a5f137ea096..7b9c2ba396edb854cfd78ddef676250a751e60bc 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -45,8 +45,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_UHP, - .end = AT91SAM9260_ID_UHP, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -98,8 +98,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_UDP, - .end = AT91SAM9260_ID_UDP, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -149,8 +149,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_EMAC, - .end = AT91SAM9260_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -223,8 +223,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_MCI, - .end = AT91SAM9260_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -305,8 +305,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_MCI, - .end = AT91SAM9260_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -496,8 +496,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_TWI, - .end = AT91SAM9260_ID_TWI, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -540,8 +540,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_SPI0, - .end = AT91SAM9260_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -566,8 +566,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_SPI1, - .end = AT91SAM9260_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -652,18 +652,18 @@ static struct resource tcb0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_TC0, - .end = AT91SAM9260_ID_TC0, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9260_ID_TC1, - .end = AT91SAM9260_ID_TC1, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9260_ID_TC2, - .end = AT91SAM9260_ID_TC2, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -682,18 +682,18 @@ static struct resource tcb1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_TC3, - .end = AT91SAM9260_ID_TC3, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9260_ID_TC4, - .end = AT91SAM9260_ID_TC4, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9260_ID_TC5, - .end = AT91SAM9260_ID_TC5, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5, .flags = IORESOURCE_IRQ, }, }; @@ -807,8 +807,8 @@ static struct resource ssc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_SSC, - .end = AT91SAM9260_ID_SSC, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC, .flags = IORESOURCE_IRQ, }, }; @@ -882,8 +882,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -920,8 +920,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US0, - .end = AT91SAM9260_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -971,8 +971,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US1, - .end = AT91SAM9260_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1014,8 +1014,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US2, - .end = AT91SAM9260_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1057,8 +1057,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US3, - .end = AT91SAM9260_ID_US3, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US3, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US3, .flags = IORESOURCE_IRQ, }, }; @@ -1100,8 +1100,8 @@ static struct resource uart4_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US4, - .end = AT91SAM9260_ID_US4, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US4, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US4, .flags = IORESOURCE_IRQ, }, }; @@ -1138,8 +1138,8 @@ static struct resource uart5_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_US5, - .end = AT91SAM9260_ID_US5, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US5, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US5, .flags = IORESOURCE_IRQ, }, }; @@ -1357,8 +1357,8 @@ static struct resource adc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9260_ID_ADC, - .end = AT91SAM9260_ID_ADC, + .start = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC, + .end = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index c77d503d09d1c2546a8e73a5ddccb246acb4ddcb..f40762c5fedee898fb836b24556f50499ee2858e 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 9295e90b08ff523fa93817ca9121eb15d9d5a2bb..8df5c1bdff92f1d1194fa9d64da61e2aa9bc2598 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -45,8 +45,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_UHP, - .end = AT91SAM9261_ID_UHP, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -98,8 +98,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_UDP, - .end = AT91SAM9261_ID_UDP, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -148,8 +148,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_MCI, - .end = AT91SAM9261_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -310,8 +310,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_TWI, - .end = AT91SAM9261_ID_TWI, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -354,8 +354,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SPI0, - .end = AT91SAM9261_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -380,8 +380,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SPI1, - .end = AT91SAM9261_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -468,8 +468,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_LCDC, - .end = AT91SAM9261_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC, .flags = IORESOURCE_IRQ, }, #if defined(CONFIG_FB_INTSRAM) @@ -566,18 +566,18 @@ static struct resource tcb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_TC0, - .end = AT91SAM9261_ID_TC0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9261_ID_TC1, - .end = AT91SAM9261_ID_TC1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9261_ID_TC2, - .end = AT91SAM9261_ID_TC2, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -689,8 +689,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SSC0, - .end = AT91SAM9261_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -731,8 +731,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SSC1, - .end = AT91SAM9261_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -773,8 +773,8 @@ static struct resource ssc2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_SSC2, - .end = AT91SAM9261_ID_SSC2, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2, .flags = IORESOURCE_IRQ, }, }; @@ -857,8 +857,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -895,8 +895,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_US0, - .end = AT91SAM9261_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -938,8 +938,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_US1, - .end = AT91SAM9261_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -981,8 +981,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9261_ID_US2, - .end = AT91SAM9261_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US2, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index ed91c7e9f7c20312ccc9f25564187c84f8e118af..84b38105231e91a52df082f3828f2042c1178201 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 175e0009eaa9b886a90694dcf5cb1d880e2e38ad..eb6bbf86fb9f597cc7424a52b459bb04ecff2326 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -44,8 +44,8 @@ static struct resource usbh_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_UHP, - .end = AT91SAM9263_ID_UHP, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP, .flags = IORESOURCE_IRQ, }, }; @@ -104,8 +104,8 @@ static struct resource udc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_UDP, - .end = AT91SAM9263_ID_UDP, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP, .flags = IORESOURCE_IRQ, }, }; @@ -155,8 +155,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_EMAC, - .end = AT91SAM9263_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -229,8 +229,8 @@ static struct resource mmc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_MCI0, - .end = AT91SAM9263_ID_MCI0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0, .flags = IORESOURCE_IRQ, }, }; @@ -254,8 +254,8 @@ static struct resource mmc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_MCI1, - .end = AT91SAM9263_ID_MCI1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1, .flags = IORESOURCE_IRQ, }, }; @@ -567,8 +567,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_TWI, - .end = AT91SAM9263_ID_TWI, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI, .flags = IORESOURCE_IRQ, }, }; @@ -611,8 +611,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SPI0, - .end = AT91SAM9263_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -637,8 +637,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SPI1, - .end = AT91SAM9263_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -725,8 +725,8 @@ static struct resource ac97_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_AC97C, - .end = AT91SAM9263_ID_AC97C, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C, .flags = IORESOURCE_IRQ, }, }; @@ -776,8 +776,8 @@ static struct resource can_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_CAN, - .end = AT91SAM9263_ID_CAN, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN, .flags = IORESOURCE_IRQ, }, }; @@ -816,8 +816,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_LCDC, - .end = AT91SAM9263_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC, .flags = IORESOURCE_IRQ, }, }; @@ -883,8 +883,8 @@ struct resource isi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_ISI, - .end = AT91SAM9263_ID_ISI, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI, .flags = IORESOURCE_IRQ, }, }; @@ -940,8 +940,8 @@ static struct resource tcb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_TCB, - .end = AT91SAM9263_ID_TCB, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB, .flags = IORESOURCE_IRQ, }, }; @@ -1108,8 +1108,8 @@ static struct resource pwm_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_PWMC, - .end = AT91SAM9263_ID_PWMC, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC, .flags = IORESOURCE_IRQ, }, }; @@ -1161,8 +1161,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SSC0, - .end = AT91SAM9263_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -1203,8 +1203,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_SSC1, - .end = AT91SAM9263_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -1284,8 +1284,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -1322,8 +1322,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US0, - .end = AT91SAM9263_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -1365,8 +1365,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US1, - .end = AT91SAM9263_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1408,8 +1408,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9263_ID_US2, - .end = AT91SAM9263_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US2, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam926x_time.c b/arch/arm/mach-at91/at91sam926x_time.c index a94758b42737a3d33a3cdce0bee439103ea8f7ab..ffc0957d7623ebe91319ab6a5810c0642ab328df 100644 --- a/arch/arm/mach-at91/at91sam926x_time.c +++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -137,7 +137,7 @@ static struct irqaction at91sam926x_pit_irq = { .name = "at91_tick", .flags = IRQF_SHARED | IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, .handler = at91sam926x_pit_interrupt, - .irq = AT91_ID_SYS, + .irq = NR_IRQS_LEGACY + AT91_ID_SYS, }; static void at91sam926x_pit_reset(void) diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 4792682d52b9962df1d227a3deb4370244260476..977127368a7dbd10d3785d4383840be2b72f840d 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 933fc9afe7d091db78f5484d4ca331a50cb50716..40fb79df2de0b0ebb19c2d4eb4258490d9839cc9 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -53,8 +53,8 @@ static struct resource hdmac_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_DMA, - .end = AT91SAM9G45_ID_DMA, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA, .flags = IORESOURCE_IRQ, }, }; @@ -94,8 +94,8 @@ static struct resource usbh_ohci_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_UHPHS, - .end = AT91SAM9G45_ID_UHPHS, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, .flags = IORESOURCE_IRQ, }, }; @@ -156,8 +156,8 @@ static struct resource usbh_ehci_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_UHPHS, - .end = AT91SAM9G45_ID_UHPHS, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS, .flags = IORESOURCE_IRQ, }, }; @@ -213,8 +213,8 @@ static struct resource usba_udc_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = AT91SAM9G45_ID_UDPHS, - .end = AT91SAM9G45_ID_UDPHS, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS, .flags = IORESOURCE_IRQ, }, }; @@ -296,8 +296,8 @@ static struct resource eth_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_EMAC, - .end = AT91SAM9G45_ID_EMAC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC, .flags = IORESOURCE_IRQ, }, }; @@ -370,8 +370,8 @@ static struct resource mmc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_MCI0, - .end = AT91SAM9G45_ID_MCI0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0, .flags = IORESOURCE_IRQ, }, }; @@ -395,8 +395,8 @@ static struct resource mmc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_MCI1, - .end = AT91SAM9G45_ID_MCI1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1, .flags = IORESOURCE_IRQ, }, }; @@ -645,8 +645,8 @@ static struct resource twi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TWI0, - .end = AT91SAM9G45_ID_TWI0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0, .flags = IORESOURCE_IRQ, }, }; @@ -665,8 +665,8 @@ static struct resource twi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TWI1, - .end = AT91SAM9G45_ID_TWI1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1, .flags = IORESOURCE_IRQ, }, }; @@ -720,8 +720,8 @@ static struct resource spi0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SPI0, - .end = AT91SAM9G45_ID_SPI0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0, .flags = IORESOURCE_IRQ, }, }; @@ -746,8 +746,8 @@ static struct resource spi1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SPI1, - .end = AT91SAM9G45_ID_SPI1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1, .flags = IORESOURCE_IRQ, }, }; @@ -834,8 +834,8 @@ static struct resource ac97_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_AC97C, - .end = AT91SAM9G45_ID_AC97C, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C, .flags = IORESOURCE_IRQ, }, }; @@ -887,8 +887,8 @@ struct resource isi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_ISI, - .end = AT91SAM9G45_ID_ISI, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI, .flags = IORESOURCE_IRQ, }, }; @@ -979,8 +979,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_LCDC, - .end = AT91SAM9G45_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC, .flags = IORESOURCE_IRQ, }, }; @@ -1054,8 +1054,8 @@ static struct resource tcb0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TCB, - .end = AT91SAM9G45_ID_TCB, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, .flags = IORESOURCE_IRQ, }, }; @@ -1075,8 +1075,8 @@ static struct resource tcb1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TCB, - .end = AT91SAM9G45_ID_TCB, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB, .flags = IORESOURCE_IRQ, }, }; @@ -1110,8 +1110,8 @@ static struct resource rtc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -1147,8 +1147,8 @@ static struct resource tsadcc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TSC, - .end = AT91SAM9G45_ID_TSC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, .flags = IORESOURCE_IRQ, } }; @@ -1197,8 +1197,8 @@ static struct resource adc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_TSC, - .end = AT91SAM9G45_ID_TSC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC, .flags = IORESOURCE_IRQ, } }; @@ -1400,8 +1400,8 @@ static struct resource pwm_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_PWMC, - .end = AT91SAM9G45_ID_PWMC, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC, .flags = IORESOURCE_IRQ, }, }; @@ -1453,8 +1453,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SSC0, - .end = AT91SAM9G45_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -1495,8 +1495,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_SSC1, - .end = AT91SAM9G45_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -1575,8 +1575,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -1613,8 +1613,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US0, - .end = AT91SAM9G45_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -1656,8 +1656,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US1, - .end = AT91SAM9G45_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1699,8 +1699,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US2, - .end = AT91SAM9G45_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1742,8 +1742,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9G45_ID_US3, - .end = AT91SAM9G45_ID_US3, + .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3, + .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index e420085a57effa34a373b3aeeaca91185f248109..72ce50a50de5a278e21535422c1572bb95837a36 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 9c0b1481a9a70c5d3ac6ebfc199c5d2e77ba1f46..f09fff932172ffec238c10714331d7c8970a53e1 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -41,8 +41,8 @@ static struct resource hdmac_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = AT91SAM9RL_ID_DMA, - .end = AT91SAM9RL_ID_DMA, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA, .flags = IORESOURCE_IRQ, }, }; @@ -84,8 +84,8 @@ static struct resource usba_udc_resources[] = { .flags = IORESOURCE_MEM, }, [2] = { - .start = AT91SAM9RL_ID_UDPHS, - .end = AT91SAM9RL_ID_UDPHS, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS, .flags = IORESOURCE_IRQ, }, }; @@ -172,8 +172,8 @@ static struct resource mmc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_MCI, - .end = AT91SAM9RL_ID_MCI, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI, .flags = IORESOURCE_IRQ, }, }; @@ -339,8 +339,8 @@ static struct resource twi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_TWI0, - .end = AT91SAM9RL_ID_TWI0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0, .flags = IORESOURCE_IRQ, }, }; @@ -383,8 +383,8 @@ static struct resource spi_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_SPI, - .end = AT91SAM9RL_ID_SPI, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI, .flags = IORESOURCE_IRQ, }, }; @@ -452,8 +452,8 @@ static struct resource ac97_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_AC97C, - .end = AT91SAM9RL_ID_AC97C, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C, .flags = IORESOURCE_IRQ, }, }; @@ -507,8 +507,8 @@ static struct resource lcdc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_LCDC, - .end = AT91SAM9RL_ID_LCDC, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC, .flags = IORESOURCE_IRQ, }, }; @@ -574,18 +574,18 @@ static struct resource tcb_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_TC0, - .end = AT91SAM9RL_ID_TC0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0, .flags = IORESOURCE_IRQ, }, [2] = { - .start = AT91SAM9RL_ID_TC1, - .end = AT91SAM9RL_ID_TC1, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1, .flags = IORESOURCE_IRQ, }, [3] = { - .start = AT91SAM9RL_ID_TC2, - .end = AT91SAM9RL_ID_TC2, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2, .flags = IORESOURCE_IRQ, }, }; @@ -621,8 +621,8 @@ static struct resource tsadcc_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_TSC, - .end = AT91SAM9RL_ID_TSC, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC, .flags = IORESOURCE_IRQ, } }; @@ -768,8 +768,8 @@ static struct resource pwm_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_PWMC, - .end = AT91SAM9RL_ID_PWMC, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC, .flags = IORESOURCE_IRQ, }, }; @@ -821,8 +821,8 @@ static struct resource ssc0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_SSC0, - .end = AT91SAM9RL_ID_SSC0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0, .flags = IORESOURCE_IRQ, }, }; @@ -863,8 +863,8 @@ static struct resource ssc1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_SSC1, - .end = AT91SAM9RL_ID_SSC1, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1, .flags = IORESOURCE_IRQ, }, }; @@ -943,8 +943,8 @@ static struct resource dbgu_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91_ID_SYS, - .end = AT91_ID_SYS, + .start = NR_IRQS_LEGACY + AT91_ID_SYS, + .end = NR_IRQS_LEGACY + AT91_ID_SYS, .flags = IORESOURCE_IRQ, }, }; @@ -981,8 +981,8 @@ static struct resource uart0_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US0, - .end = AT91SAM9RL_ID_US0, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0, .flags = IORESOURCE_IRQ, }, }; @@ -1032,8 +1032,8 @@ static struct resource uart1_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US1, - .end = AT91SAM9RL_ID_US1, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1, .flags = IORESOURCE_IRQ, }, }; @@ -1075,8 +1075,8 @@ static struct resource uart2_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US2, - .end = AT91SAM9RL_ID_US2, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2, .flags = IORESOURCE_IRQ, }, }; @@ -1118,8 +1118,8 @@ static struct resource uart3_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = AT91SAM9RL_ID_US3, - .end = AT91SAM9RL_ID_US3, + .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3, + .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3, .flags = IORESOURCE_IRQ, }, }; diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 1b144b4d3ce19da1ef7a580d2bbde299100eaa5f..477cf9d06672c7259cca0dab641bcb099de8e6b5 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -312,8 +312,6 @@ static void __init at91sam9x5_map_io(void) void __init at91sam9x5_initialize(void) { - at91_extern_irq = (1 << AT91SAM9X5_ID_IRQ0); - /* Register GPIO subsystem (using DT) */ at91_gpio_init(NULL, 0); } @@ -321,47 +319,9 @@ void __init at91sam9x5_initialize(void) /* -------------------------------------------------------------------- * Interrupt initialization * -------------------------------------------------------------------- */ -/* - * The default interrupt priority levels (0 = lowest, 7 = highest). - */ -static unsigned int at91sam9x5_default_irq_priority[NR_AIC_IRQS] __initdata = { - 7, /* Advanced Interrupt Controller (FIQ) */ - 7, /* System Peripherals */ - 1, /* Parallel IO Controller A and B */ - 1, /* Parallel IO Controller C and D */ - 4, /* Soft Modem */ - 5, /* USART 0 */ - 5, /* USART 1 */ - 5, /* USART 2 */ - 5, /* USART 3 */ - 6, /* Two-Wire Interface 0 */ - 6, /* Two-Wire Interface 1 */ - 6, /* Two-Wire Interface 2 */ - 0, /* Multimedia Card Interface 0 */ - 5, /* Serial Peripheral Interface 0 */ - 5, /* Serial Peripheral Interface 1 */ - 5, /* UART 0 */ - 5, /* UART 1 */ - 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */ - 0, /* Pulse Width Modulation Controller */ - 0, /* ADC Controller */ - 0, /* DMA Controller 0 */ - 0, /* DMA Controller 1 */ - 2, /* USB Host High Speed port */ - 2, /* USB Device High speed port */ - 3, /* Ethernet MAC 0 */ - 3, /* LDC Controller or Image Sensor Interface */ - 0, /* Multimedia Card Interface 1 */ - 3, /* Ethernet MAC 1 */ - 4, /* Synchronous Serial Interface */ - 4, /* CAN Controller 0 */ - 4, /* CAN Controller 1 */ - 0, /* Advanced Interrupt Controller (IRQ0) */ -}; struct at91_init_soc __initdata at91sam9x5_soc = { .map_io = at91sam9x5_map_io, - .default_irq_priority = at91sam9x5_default_irq_priority, .register_clocks = at91sam9x5_register_clocks, .init = at91sam9x5_initialize, }; diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index d62fe090d814c4860403984e470d2f6ad919a79f..46090e642d8eb00b7fe93e05b70c9ea62dc9c8c3 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -13,10 +13,12 @@ #include #include #include +#include #include #include #include #include +#include #include #include #include "generic.h" diff --git a/arch/arm/mach-at91/board-1arm.c b/arch/arm/mach-at91/board-1arm.c index 271f994314a469807f2d328f4c75418534d699dc..22d8856094f19a0b0c7512edc135de7425db4501 100644 --- a/arch/arm/mach-at91/board-1arm.c +++ b/arch/arm/mach-at91/board-1arm.c @@ -36,6 +36,7 @@ #include #include +#include #include "generic.h" @@ -91,6 +92,7 @@ MACHINE_START(ONEARM, "Ajeco 1ARM single board computer") /* Maintainer: Lennert Buytenhek */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = onearm_init_early, .init_irq = at91_init_irq_default, .init_machine = onearm_board_init, diff --git a/arch/arm/mach-at91/board-afeb-9260v1.c b/arch/arm/mach-at91/board-afeb-9260v1.c index b7d8aa7b81e64baa60d6ea772a74a52c471d5228..de7be193181795cb210e5865df30e6fb8babb0d8 100644 --- a/arch/arm/mach-at91/board-afeb-9260v1.c +++ b/arch/arm/mach-at91/board-afeb-9260v1.c @@ -44,6 +44,7 @@ #include #include +#include #include "generic.h" @@ -212,6 +213,7 @@ MACHINE_START(AFEB9260, "Custom afeb9260 board") /* Maintainer: Sergey Lapin */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = afeb9260_init_early, .init_irq = at91_init_irq_default, .init_machine = afeb9260_board_init, diff --git a/arch/arm/mach-at91/board-cam60.c b/arch/arm/mach-at91/board-cam60.c index 29d3ef0a50fb9901ed71d6c27f7dd6de819950e8..477e708497bcfc47e4a225d189d767b07561d210 100644 --- a/arch/arm/mach-at91/board-cam60.c +++ b/arch/arm/mach-at91/board-cam60.c @@ -39,6 +39,7 @@ #include #include +#include #include #include "sam9_smc.h" @@ -188,6 +189,7 @@ MACHINE_START(CAM60, "KwikByte CAM60") /* Maintainer: KwikByte */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = cam60_init_early, .init_irq = at91_init_irq_default, .init_machine = cam60_board_init, diff --git a/arch/arm/mach-at91/board-carmeva.c b/arch/arm/mach-at91/board-carmeva.c index 44328a6d46095027b75f903a11b7ec611c9043f5..a5b002f32a6162e98e6ae5335fcdbec2eb911332 100644 --- a/arch/arm/mach-at91/board-carmeva.c +++ b/arch/arm/mach-at91/board-carmeva.c @@ -36,6 +36,7 @@ #include #include +#include #include "generic.h" @@ -158,6 +159,7 @@ MACHINE_START(CARMEVA, "Carmeva") /* Maintainer: Conitec Datasystems */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = carmeva_init_early, .init_irq = at91_init_irq_default, .init_machine = carmeva_board_init, diff --git a/arch/arm/mach-at91/board-cpu9krea.c b/arch/arm/mach-at91/board-cpu9krea.c index 69951ec7dbf310dd5a4d800c90d9ae5dcc6adcff..ecbc13b594de05ed2877d27eab08b91db16cf475 100644 --- a/arch/arm/mach-at91/board-cpu9krea.c +++ b/arch/arm/mach-at91/board-cpu9krea.c @@ -41,6 +41,7 @@ #include #include +#include #include #include #include @@ -376,6 +377,7 @@ MACHINE_START(CPUAT9G20, "Eukrea CPU9G20") /* Maintainer: Eric Benard - EUKREA Electromatique */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = cpu9krea_init_early, .init_irq = at91_init_irq_default, .init_machine = cpu9krea_board_init, diff --git a/arch/arm/mach-at91/board-cpuat91.c b/arch/arm/mach-at91/board-cpuat91.c index 895cf2dba612fe3a6c1ec0212ce7d1c45ff127cb..2e6d043c82f202e352b426e0ac699a74b15fbdcd 100644 --- a/arch/arm/mach-at91/board-cpuat91.c +++ b/arch/arm/mach-at91/board-cpuat91.c @@ -37,6 +37,7 @@ #include #include +#include #include #include #include @@ -178,6 +179,7 @@ MACHINE_START(CPUAT91, "Eukrea") /* Maintainer: Eric Benard - EUKREA Electromatique */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = cpuat91_init_early, .init_irq = at91_init_irq_default, .init_machine = cpuat91_board_init, diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index cd813361cd26be2d61a49de0f536f3be0ac1059d..462bc319cbc589b2bc86d80c4ebcce642ac7bc33 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -39,6 +39,7 @@ #include #include +#include #include "generic.h" @@ -252,6 +253,7 @@ MACHINE_START(CSB337, "Cogent CSB337") /* Maintainer: Bill Gatliff */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = csb337_init_early, .init_irq = at91_init_irq_default, .init_machine = csb337_board_init, diff --git a/arch/arm/mach-at91/board-csb637.c b/arch/arm/mach-at91/board-csb637.c index 7c8b05a57d7f5f9460e436f338b23668fe7ec577..872871ab11605e37dd35df90a85a7a8f8cb762c7 100644 --- a/arch/arm/mach-at91/board-csb637.c +++ b/arch/arm/mach-at91/board-csb637.c @@ -36,6 +36,7 @@ #include #include +#include #include "generic.h" @@ -133,6 +134,7 @@ MACHINE_START(CSB637, "Cogent CSB637") /* Maintainer: Bill Gatliff */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = csb637_init_early, .init_irq = at91_init_irq_default, .init_machine = csb637_board_init, diff --git a/arch/arm/mach-at91/board-dt.c b/arch/arm/mach-at91/board-dt.c index a1fce05aa7a5f7b64e8889f348934d3f75e5ee8a..e8f45c4e0ea8f01affd71c486d50ea1f42228e4c 100644 --- a/arch/arm/mach-at91/board-dt.c +++ b/arch/arm/mach-at91/board-dt.c @@ -16,6 +16,7 @@ #include #include +#include #include #include @@ -53,6 +54,7 @@ DT_MACHINE_START(at91sam_dt, "Atmel AT91SAM (Device Tree)") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = at91_dt_initialize, .init_irq = at91_dt_init_irq, .init_machine = at91_dt_device_init, diff --git a/arch/arm/mach-at91/board-eb01.c b/arch/arm/mach-at91/board-eb01.c index d2023f27c65254f83113588a105d221ccfabf705..01f66e99ece73a875b3aa97b79c1af0ca54da58d 100644 --- a/arch/arm/mach-at91/board-eb01.c +++ b/arch/arm/mach-at91/board-eb01.c @@ -28,6 +28,7 @@ #include #include #include +#include #include "generic.h" static void __init at91eb01_init_irq(void) @@ -43,6 +44,7 @@ static void __init at91eb01_init_early(void) MACHINE_START(AT91EB01, "Atmel AT91 EB01") /* Maintainer: Greg Ungerer */ .timer = &at91x40_timer, + .handle_irq = at91_aic_handle_irq, .init_early = at91eb01_init_early, .init_irq = at91eb01_init_irq, MACHINE_END diff --git a/arch/arm/mach-at91/board-eb9200.c b/arch/arm/mach-at91/board-eb9200.c index bd10172979891c1aab6b139496b068500eedc30b..d1e1f3fc0a47a06d912eddc622048b0663c8be8d 100644 --- a/arch/arm/mach-at91/board-eb9200.c +++ b/arch/arm/mach-at91/board-eb9200.c @@ -36,6 +36,7 @@ #include #include +#include #include "generic.h" @@ -118,6 +119,7 @@ static void __init eb9200_board_init(void) MACHINE_START(ATEB9200, "Embest ATEB9200") .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = eb9200_init_early, .init_irq = at91_init_irq_default, .init_machine = eb9200_board_init, diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 89cc3726a9ce1f3b57f5c589b5d495d1a6c5d4db..9c24cb25707c61dae73275d31c4c669af20528cd 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -39,6 +39,7 @@ #include #include +#include #include "generic.h" @@ -170,6 +171,7 @@ MACHINE_START(ECBAT91, "emQbit's ECB_AT91") /* Maintainer: emQbit.com */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ecb_at91init_early, .init_irq = at91_init_irq_default, .init_machine = ecb_at91board_init, diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 558546cf63f492bf46d5b290b389e019f428244a..82bdfde3405f52d0ef1fd34507b12bd4bfe56466 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -25,6 +25,7 @@ #include #include +#include #include #include #include @@ -132,6 +133,7 @@ MACHINE_START(ECO920, "eco920") /* Maintainer: Sascha Hauer */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = eco920_init_early, .init_irq = at91_init_irq_default, .init_machine = eco920_board_init, diff --git a/arch/arm/mach-at91/board-flexibity.c b/arch/arm/mach-at91/board-flexibity.c index 47658f78105db41fad698b7d438444f60c8f6cbf..6cc83a87d77cf9422e958f9526720842de343cb9 100644 --- a/arch/arm/mach-at91/board-flexibity.c +++ b/arch/arm/mach-at91/board-flexibity.c @@ -34,6 +34,7 @@ #include #include +#include #include "generic.h" @@ -160,6 +161,7 @@ MACHINE_START(FLEXIBITY, "Flexibity Connect") /* Maintainer: Maxim Osipov */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = flexibity_init_early, .init_irq = at91_init_irq_default, .init_machine = flexibity_board_init, diff --git a/arch/arm/mach-at91/board-foxg20.c b/arch/arm/mach-at91/board-foxg20.c index 33411e6ecb1f1747f7431721003e4b722218bf57..69ab1247ef81263fb430de41d5c025263de5cb9e 100644 --- a/arch/arm/mach-at91/board-foxg20.c +++ b/arch/arm/mach-at91/board-foxg20.c @@ -42,6 +42,7 @@ #include #include +#include #include #include "sam9_smc.h" @@ -262,6 +263,7 @@ MACHINE_START(ACMENETUSFOXG20, "Acme Systems srl FOX Board G20") /* Maintainer: Sergio Tanzilli */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = foxg20_init_early, .init_irq = at91_init_irq_default, .init_machine = foxg20_board_init, diff --git a/arch/arm/mach-at91/board-gsia18s.c b/arch/arm/mach-at91/board-gsia18s.c index 3e0dfa643a86e1714ad627638667a9df713375a7..a9d5e78118c5475a763bfb310a22b588d2c9ddc8 100644 --- a/arch/arm/mach-at91/board-gsia18s.c +++ b/arch/arm/mach-at91/board-gsia18s.c @@ -31,6 +31,7 @@ #include #include +#include #include #include #include @@ -575,6 +576,7 @@ static void __init gsia18s_board_init(void) MACHINE_START(GSIA18S, "GS_IA18_S") .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = gsia18s_init_early, .init_irq = at91_init_irq_default, .init_machine = gsia18s_board_init, diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index f260657f32bcf5881b3d2aa98fa9d442f992a4df..64c1dbf88a07bfe602f9c8c29071bff1ba5db774 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -35,6 +35,7 @@ #include #include +#include #include #include "generic.h" @@ -93,6 +94,7 @@ MACHINE_START(KAFA, "Sperry-Sun KAFA") /* Maintainer: Sergei Sharonov */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = kafa_init_early, .init_irq = at91_init_irq_default, .init_machine = kafa_board_init, diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index ba39db5482b955617689e7f65adb39e245915738..5d96cb85175f9a6bce00c7b30ce12fa5d46b5821 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -37,6 +37,7 @@ #include #include +#include #include #include @@ -133,6 +134,7 @@ MACHINE_START(KB9200, "KB920x") /* Maintainer: KwikByte, Inc. */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = kb9202_init_early, .init_irq = at91_init_irq_default, .init_machine = kb9202_board_init, diff --git a/arch/arm/mach-at91/board-neocore926.c b/arch/arm/mach-at91/board-neocore926.c index d2f4cc1617669e9d92729c47dde9d6c1bc84a0cf..18103c5d993ce24c148887d5bfc60331f4cb556d 100644 --- a/arch/arm/mach-at91/board-neocore926.c +++ b/arch/arm/mach-at91/board-neocore926.c @@ -45,6 +45,7 @@ #include #include +#include #include #include "sam9_smc.h" @@ -378,6 +379,7 @@ MACHINE_START(NEOCORE926, "ADENEO NEOCORE 926") /* Maintainer: ADENEO */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = neocore926_init_early, .init_irq = at91_init_irq_default, .init_machine = neocore926_board_init, diff --git a/arch/arm/mach-at91/board-pcontrol-g20.c b/arch/arm/mach-at91/board-pcontrol-g20.c index 7fe6383424213a173a9f5553077f3c468aff8945..9ca3e32c54cbb3b52acc0224625c5c83b8cecad3 100644 --- a/arch/arm/mach-at91/board-pcontrol-g20.c +++ b/arch/arm/mach-at91/board-pcontrol-g20.c @@ -30,6 +30,7 @@ #include #include +#include #include #include @@ -218,6 +219,7 @@ MACHINE_START(PCONTROL_G20, "PControl G20") /* Maintainer: pgsellmann@portner-elektronik.at */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = pcontrol_g20_init_early, .init_irq = at91_init_irq_default, .init_machine = pcontrol_g20_board_init, diff --git a/arch/arm/mach-at91/board-picotux200.c b/arch/arm/mach-at91/board-picotux200.c index b45c0a5d5ca7649c745d4718a329d0ee65fbdf20..127065504508c8fd5bffd4f00d778339fe497788 100644 --- a/arch/arm/mach-at91/board-picotux200.c +++ b/arch/arm/mach-at91/board-picotux200.c @@ -38,6 +38,7 @@ #include #include +#include #include #include @@ -120,6 +121,7 @@ MACHINE_START(PICOTUX2XX, "picotux 200") /* Maintainer: Kleinhenz Elektronik GmbH */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = picotux200_init_early, .init_irq = at91_init_irq_default, .init_machine = picotux200_board_init, diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c index 0c61bf0d272c3b02215da56a7cfbdf7c2ce6a0fd..bf351e285422684cc71644e090ea428c766c556b 100644 --- a/arch/arm/mach-at91/board-qil-a9260.c +++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -41,6 +41,7 @@ #include #include +#include #include #include @@ -258,6 +259,7 @@ MACHINE_START(QIL_A9260, "CALAO QIL_A9260") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index afd7a4713766cec538c1736daf0895f691d6ebf3..cc2bf9796073bcb096883059c7cced4153287a91 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -40,6 +40,7 @@ #include #include +#include #include #include @@ -223,6 +224,7 @@ MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") /* Maintainer: SAN People/Atmel */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = dk_init_early, .init_irq = at91_init_irq_default, .init_machine = dk_board_init, diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 2b15b8adec4ccb9c671fab7e2423a59f2860ad89..62e19e64c9d3f52dc0d5ca8e2470dfe9cfc1918e 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -40,6 +40,7 @@ #include #include +#include #include #include @@ -190,6 +191,7 @@ MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") /* Maintainer: SAN People/Atmel */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index 24ab9be7510fbe5f6cdd3296be794fd7affa8cdc..c3b43aefdb7597d2f71dc5e8e40e054019b891f6 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -26,6 +26,7 @@ #include #include +#include #include @@ -225,6 +226,7 @@ MACHINE_START(RSI_EWS, "RSI EWS") /* Maintainer: Josef Holzmayr */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = rsi_ews_init_early, .init_irq = at91_init_irq_default, .init_machine = rsi_ews_board_init, diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index cdd21f2595d2220de8fc828f636d240e0d0b1476..7bf6da70d7d56bbe735156f5c72add8a5441338b 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -38,6 +38,7 @@ #include #include +#include #include #include "sam9_smc.h" @@ -202,6 +203,7 @@ MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") /* Maintainer: Olimex */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9260ek.c b/arch/arm/mach-at91/board-sam9260ek.c index 7b3c3913551a53ccc7a08eef94b5a18b7bba428b..889c1bf71eb596d2efd28fc76d086f2d87a42b9d 100644 --- a/arch/arm/mach-at91/board-sam9260ek.c +++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -42,6 +42,7 @@ #include #include +#include #include #include #include @@ -344,6 +345,7 @@ MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 2736453821b0d55e9782d065107c176102ca4c35..2269be5fa3841075539fd106746ce7c7cc88776d 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -46,6 +46,7 @@ #include #include +#include #include #include #include @@ -615,6 +616,7 @@ MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index 983cb98d2465c7253b2c9c2900de5379e2636979..82adf581afc2eb48868ea1d3198685bff22d457a 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -45,6 +45,7 @@ #include #include +#include #include #include #include @@ -443,6 +444,7 @@ MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9g20ek.c b/arch/arm/mach-at91/board-sam9g20ek.c index 6860d3451100321a8bfd8930c6d5bc96e5fc3b9e..4ea4ee00364b44fd2fe1ef693d72e08e57a734e9 100644 --- a/arch/arm/mach-at91/board-sam9g20ek.c +++ b/arch/arm/mach-at91/board-sam9g20ek.c @@ -44,6 +44,7 @@ #include #include +#include #include #include @@ -413,6 +414,7 @@ MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, @@ -422,6 +424,7 @@ MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9m10g45ek.c b/arch/arm/mach-at91/board-sam9m10g45ek.c index 63163dc7df46c4b416fadf21031c393716861fcc..3d48ec15468594f6b3fde5654f4f709eb4a4abea 100644 --- a/arch/arm/mach-at91/board-sam9m10g45ek.c +++ b/arch/arm/mach-at91/board-sam9m10g45ek.c @@ -43,6 +43,7 @@ #include #include +#include #include #include #include @@ -503,6 +504,7 @@ MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-sam9rlek.c b/arch/arm/mach-at91/board-sam9rlek.c index be3239f13daa64341598d1b5f33041ff44058eab..e7dc3ead7045f3f938c65729263a71be5050dafb 100644 --- a/arch/arm/mach-at91/board-sam9rlek.c +++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -31,6 +31,7 @@ #include #include +#include #include #include @@ -319,6 +320,7 @@ MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") /* Maintainer: Atmel */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-snapper9260.c b/arch/arm/mach-at91/board-snapper9260.c index 9d446f1bb45fe6fcc91d78a35932bb56823e685e..a4e031a039fd50c0fd407ffc34d6ae9240070301 100644 --- a/arch/arm/mach-at91/board-snapper9260.c +++ b/arch/arm/mach-at91/board-snapper9260.c @@ -33,6 +33,7 @@ #include #include +#include #include #include "sam9_smc.h" @@ -178,6 +179,7 @@ static void __init snapper9260_board_init(void) MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module") .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = snapper9260_init_early, .init_irq = at91_init_irq_default, .init_machine = snapper9260_board_init, diff --git a/arch/arm/mach-at91/board-stamp9g20.c b/arch/arm/mach-at91/board-stamp9g20.c index ee86f9d7ee72ed87bf408e273858be3dbe4586e1..29eae1626bf79ffa1ca4c4bf562d6ef255b81f82 100644 --- a/arch/arm/mach-at91/board-stamp9g20.c +++ b/arch/arm/mach-at91/board-stamp9g20.c @@ -26,6 +26,7 @@ #include #include +#include #include #include "sam9_smc.h" @@ -287,6 +288,7 @@ MACHINE_START(PORTUXG20, "taskit PortuxG20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, .init_irq = at91_init_irq_default, .init_machine = portuxg20_board_init, @@ -296,6 +298,7 @@ MACHINE_START(STAMP9G20, "taskit Stamp9G20") /* Maintainer: taskit GmbH */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = stamp9g20_init_early, .init_irq = at91_init_irq_default, .init_machine = stamp9g20evb_board_init, diff --git a/arch/arm/mach-at91/board-usb-a926x.c b/arch/arm/mach-at91/board-usb-a926x.c index 95393fcaf199c9664bc6cafa8fafe17e826e5d92..c1476b9fe7b91a98ef279e4be2ecd250300bb1fc 100644 --- a/arch/arm/mach-at91/board-usb-a926x.c +++ b/arch/arm/mach-at91/board-usb-a926x.c @@ -42,6 +42,7 @@ #include #include +#include #include #include @@ -358,6 +359,7 @@ MACHINE_START(USB_A9263, "CALAO USB_A9263") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, @@ -367,6 +369,7 @@ MACHINE_START(USB_A9260, "CALAO USB_A9260") /* Maintainer: calao-systems */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, @@ -376,6 +379,7 @@ MACHINE_START(USB_A9G20, "CALAO USB_A92G0") /* Maintainer: Jean-Christophe PLAGNIOL-VILLARD */ .timer = &at91sam926x_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = ek_init_early, .init_irq = at91_init_irq_default, .init_machine = ek_board_init, diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index d56665ea4b55d3a8259228d8801fe20a547b9bab..516d340549d8db4c4ffe0a5ff461aee9cb7e6175 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -44,6 +44,7 @@ #include #include +#include #include #include #include @@ -590,6 +591,7 @@ MACHINE_START(YL9200, "uCdragon YL-9200") /* Maintainer: S.Birtles */ .timer = &at91rm9200_timer, .map_io = at91_map_io, + .handle_irq = at91_aic_handle_irq, .init_early = yl9200_init_early, .init_irq = at91_init_irq_default, .init_machine = yl9200_board_init, diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h index 0a60bf837037dd67382163c30f3290ed30acb9ae..f49650677653a0f0488e6c64346fcf07e46ae555 100644 --- a/arch/arm/mach-at91/generic.h +++ b/arch/arm/mach-at91/generic.h @@ -29,6 +29,8 @@ extern void __init at91x40_init_interrupts(unsigned int priority[]); extern void __init at91_aic_init(unsigned int priority[]); extern int __init at91_aic_of_init(struct device_node *node, struct device_node *parent); +extern int __init at91_aic5_of_init(struct device_node *node, + struct device_node *parent); /* Timer */ diff --git a/arch/arm/mach-at91/gpio.c b/arch/arm/mach-at91/gpio.c index 325837a264c930fdbe1787d3ed2e61d3f75d1772..be42cf0e74bddd39ded6e1b54d7f17d351a24bc1 100644 --- a/arch/arm/mach-at91/gpio.c +++ b/arch/arm/mach-at91/gpio.c @@ -26,6 +26,8 @@ #include #include +#include + #include #include @@ -585,15 +587,14 @@ static struct irq_chip gpio_irqchip = { static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) { + struct irq_chip *chip = irq_desc_get_chip(desc); struct irq_data *idata = irq_desc_get_irq_data(desc); - struct irq_chip *chip = irq_data_get_irq_chip(idata); struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata); void __iomem *pio = at91_gpio->regbase; unsigned long isr; int n; - /* temporarily mask (level sensitive) parent IRQ */ - chip->irq_ack(idata); + chained_irq_enter(chip, desc); for (;;) { /* Reading ISR acks pending (edge triggered) GPIO interrupts. * When there none are pending, we're finished unless we need @@ -614,7 +615,7 @@ static void gpio_irq_handler(unsigned irq, struct irq_desc *desc) n = find_next_bit(&isr, BITS_PER_LONG, n + 1); } } - chip->irq_unmask(idata); + chained_irq_exit(chip, desc); /* now it may re-trigger */ } diff --git a/arch/arm/mach-at91/include/mach/at91_aic.h b/arch/arm/mach-at91/include/mach/at91_aic.h index 3045781c473f5d427e84e9ad83e51592c5e3d3da..eaea66197fa17f606e8f5d2228b5efa61e936c86 100644 --- a/arch/arm/mach-at91/include/mach/at91_aic.h +++ b/arch/arm/mach-at91/include/mach/at91_aic.h @@ -23,12 +23,23 @@ extern void __iomem *at91_aic_base; __raw_readl(at91_aic_base + field) #define at91_aic_write(field, value) \ - __raw_writel(value, at91_aic_base + field); + __raw_writel(value, at91_aic_base + field) #else .extern at91_aic_base #endif +/* Number of irq lines managed by AIC */ +#define NR_AIC_IRQS 32 +#define NR_AIC5_IRQS 128 + +#define AT91_AIC5_SSR 0x0 /* Source Select Register [AIC5] */ +#define AT91_AIC5_INTSEL_MSK (0x7f << 0) /* Interrupt Line Selection Mask */ + +#define AT91_AIC_IRQ_MIN_PRIORITY 0 +#define AT91_AIC_IRQ_MAX_PRIORITY 7 + #define AT91_AIC_SMR(n) ((n) * 4) /* Source Mode Registers 0-31 */ +#define AT91_AIC5_SMR 0x4 /* Source Mode Register [AIC5] */ #define AT91_AIC_PRIOR (7 << 0) /* Priority Level */ #define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */ #define AT91_AIC_SRCTYPE_LOW (0 << 5) @@ -37,29 +48,52 @@ extern void __iomem *at91_aic_base; #define AT91_AIC_SRCTYPE_RISING (3 << 5) #define AT91_AIC_SVR(n) (0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */ +#define AT91_AIC5_SVR 0x8 /* Source Vector Register [AIC5] */ #define AT91_AIC_IVR 0x100 /* Interrupt Vector Register */ +#define AT91_AIC5_IVR 0x10 /* Interrupt Vector Register [AIC5] */ #define AT91_AIC_FVR 0x104 /* Fast Interrupt Vector Register */ +#define AT91_AIC5_FVR 0x14 /* Fast Interrupt Vector Register [AIC5] */ #define AT91_AIC_ISR 0x108 /* Interrupt Status Register */ +#define AT91_AIC5_ISR 0x18 /* Interrupt Status Register [AIC5] */ #define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */ #define AT91_AIC_IPR 0x10c /* Interrupt Pending Register */ +#define AT91_AIC5_IPR0 0x20 /* Interrupt Pending Register 0 [AIC5] */ +#define AT91_AIC5_IPR1 0x24 /* Interrupt Pending Register 1 [AIC5] */ +#define AT91_AIC5_IPR2 0x28 /* Interrupt Pending Register 2 [AIC5] */ +#define AT91_AIC5_IPR3 0x2c /* Interrupt Pending Register 3 [AIC5] */ #define AT91_AIC_IMR 0x110 /* Interrupt Mask Register */ +#define AT91_AIC5_IMR 0x30 /* Interrupt Mask Register [AIC5] */ #define AT91_AIC_CISR 0x114 /* Core Interrupt Status Register */ +#define AT91_AIC5_CISR 0x34 /* Core Interrupt Status Register [AIC5] */ #define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */ #define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */ #define AT91_AIC_IECR 0x120 /* Interrupt Enable Command Register */ +#define AT91_AIC5_IECR 0x40 /* Interrupt Enable Command Register [AIC5] */ #define AT91_AIC_IDCR 0x124 /* Interrupt Disable Command Register */ +#define AT91_AIC5_IDCR 0x44 /* Interrupt Disable Command Register [AIC5] */ #define AT91_AIC_ICCR 0x128 /* Interrupt Clear Command Register */ +#define AT91_AIC5_ICCR 0x48 /* Interrupt Clear Command Register [AIC5] */ #define AT91_AIC_ISCR 0x12c /* Interrupt Set Command Register */ +#define AT91_AIC5_ISCR 0x4c /* Interrupt Set Command Register [AIC5] */ #define AT91_AIC_EOICR 0x130 /* End of Interrupt Command Register */ +#define AT91_AIC5_EOICR 0x38 /* End of Interrupt Command Register [AIC5] */ #define AT91_AIC_SPU 0x134 /* Spurious Interrupt Vector Register */ +#define AT91_AIC5_SPU 0x3c /* Spurious Interrupt Vector Register [AIC5] */ #define AT91_AIC_DCR 0x138 /* Debug Control Register */ +#define AT91_AIC5_DCR 0x6c /* Debug Control Register [AIC5] */ #define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */ #define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */ #define AT91_AIC_FFER 0x140 /* Fast Forcing Enable Register [SAM9 only] */ +#define AT91_AIC5_FFER 0x50 /* Fast Forcing Enable Register [AIC5] */ #define AT91_AIC_FFDR 0x144 /* Fast Forcing Disable Register [SAM9 only] */ +#define AT91_AIC5_FFDR 0x54 /* Fast Forcing Disable Register [AIC5] */ #define AT91_AIC_FFSR 0x148 /* Fast Forcing Status Register [SAM9 only] */ +#define AT91_AIC5_FFSR 0x58 /* Fast Forcing Status Register [AIC5] */ + +void at91_aic_handle_irq(struct pt_regs *regs); +void at91_aic5_handle_irq(struct pt_regs *regs); #endif diff --git a/arch/arm/mach-at91/include/mach/at91_spi.h b/arch/arm/mach-at91/include/mach/at91_spi.h deleted file mode 100644 index 2f6ba0c5636e6c7b0f51359aea1785c24ba9adb9..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91_spi.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_spi.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Serial Peripheral Interface (SPI) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SPI_H -#define AT91_SPI_H - -#define AT91_SPI_CR 0x00 /* Control Register */ -#define AT91_SPI_SPIEN (1 << 0) /* SPI Enable */ -#define AT91_SPI_SPIDIS (1 << 1) /* SPI Disable */ -#define AT91_SPI_SWRST (1 << 7) /* SPI Software Reset */ -#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ - -#define AT91_SPI_MR 0x04 /* Mode Register */ -#define AT91_SPI_MSTR (1 << 0) /* Master/Slave Mode */ -#define AT91_SPI_PS (1 << 1) /* Peripheral Select */ -#define AT91_SPI_PS_FIXED (0 << 1) -#define AT91_SPI_PS_VARIABLE (1 << 1) -#define AT91_SPI_PCSDEC (1 << 2) /* Chip Select Decode */ -#define AT91_SPI_DIV32 (1 << 3) /* Clock Selection [AT91RM9200 only] */ -#define AT91_SPI_MODFDIS (1 << 4) /* Mode Fault Detection */ -#define AT91_SPI_LLB (1 << 7) /* Local Loopback Enable */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -#define AT91_SPI_DLYBCS (0xff << 24) /* Delay Between Chip Selects */ - -#define AT91_SPI_RDR 0x08 /* Receive Data Register */ -#define AT91_SPI_RD (0xffff << 0) /* Receive Data */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ - -#define AT91_SPI_TDR 0x0c /* Transmit Data Register */ -#define AT91_SPI_TD (0xffff << 0) /* Transmit Data */ -#define AT91_SPI_PCS (0xf << 16) /* Peripheral Chip Select */ -#define AT91_SPI_LASTXFER (1 << 24) /* Last Transfer [SAM9261 only] */ - -#define AT91_SPI_SR 0x10 /* Status Register */ -#define AT91_SPI_RDRF (1 << 0) /* Receive Data Register Full */ -#define AT91_SPI_TDRE (1 << 1) /* Transmit Data Register Full */ -#define AT91_SPI_MODF (1 << 2) /* Mode Fault Error */ -#define AT91_SPI_OVRES (1 << 3) /* Overrun Error Status */ -#define AT91_SPI_ENDRX (1 << 4) /* End of RX buffer */ -#define AT91_SPI_ENDTX (1 << 5) /* End of TX buffer */ -#define AT91_SPI_RXBUFF (1 << 6) /* RX Buffer Full */ -#define AT91_SPI_TXBUFE (1 << 7) /* TX Buffer Empty */ -#define AT91_SPI_NSSR (1 << 8) /* NSS Rising [SAM9261 only] */ -#define AT91_SPI_TXEMPTY (1 << 9) /* Transmission Register Empty [SAM9261 only] */ -#define AT91_SPI_SPIENS (1 << 16) /* SPI Enable Status */ - -#define AT91_SPI_IER 0x14 /* Interrupt Enable Register */ -#define AT91_SPI_IDR 0x18 /* Interrupt Disable Register */ -#define AT91_SPI_IMR 0x1c /* Interrupt Mask Register */ - -#define AT91_SPI_CSR(n) (0x30 + ((n) * 4)) /* Chip Select Registers 0-3 */ -#define AT91_SPI_CPOL (1 << 0) /* Clock Polarity */ -#define AT91_SPI_NCPHA (1 << 1) /* Clock Phase */ -#define AT91_SPI_CSAAT (1 << 3) /* Chip Select Active After Transfer [SAM9261 only] */ -#define AT91_SPI_BITS (0xf << 4) /* Bits Per Transfer */ -#define AT91_SPI_BITS_8 (0 << 4) -#define AT91_SPI_BITS_9 (1 << 4) -#define AT91_SPI_BITS_10 (2 << 4) -#define AT91_SPI_BITS_11 (3 << 4) -#define AT91_SPI_BITS_12 (4 << 4) -#define AT91_SPI_BITS_13 (5 << 4) -#define AT91_SPI_BITS_14 (6 << 4) -#define AT91_SPI_BITS_15 (7 << 4) -#define AT91_SPI_BITS_16 (8 << 4) -#define AT91_SPI_SCBR (0xff << 8) /* Serial Clock Baud Rate */ -#define AT91_SPI_DLYBS (0xff << 16) /* Delay before SPCK */ -#define AT91_SPI_DLYBCT (0xff << 24) /* Delay between Consecutive Transfers */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/at91_ssc.h b/arch/arm/mach-at91/include/mach/at91_ssc.h deleted file mode 100644 index a81114c11c74eda0d2f92e5c7d3804e16890d980..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91_ssc.h +++ /dev/null @@ -1,106 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_ssc.h - * - * Copyright (C) SAN People - * - * Serial Synchronous Controller (SSC) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_SSC_H -#define AT91_SSC_H - -#define AT91_SSC_CR 0x00 /* Control Register */ -#define AT91_SSC_RXEN (1 << 0) /* Receive Enable */ -#define AT91_SSC_RXDIS (1 << 1) /* Receive Disable */ -#define AT91_SSC_TXEN (1 << 8) /* Transmit Enable */ -#define AT91_SSC_TXDIS (1 << 9) /* Transmit Disable */ -#define AT91_SSC_SWRST (1 << 15) /* Software Reset */ - -#define AT91_SSC_CMR 0x04 /* Clock Mode Register */ -#define AT91_SSC_CMR_DIV (0xfff << 0) /* Clock Divider */ - -#define AT91_SSC_RCMR 0x10 /* Receive Clock Mode Register */ -#define AT91_SSC_CKS (3 << 0) /* Clock Selection */ -#define AT91_SSC_CKS_DIV (0 << 0) -#define AT91_SSC_CKS_CLOCK (1 << 0) -#define AT91_SSC_CKS_PIN (2 << 0) -#define AT91_SSC_CKO (7 << 2) /* Clock Output Mode Selection */ -#define AT91_SSC_CKO_NONE (0 << 2) -#define AT91_SSC_CKO_CONTINUOUS (1 << 2) -#define AT91_SSC_CKI (1 << 5) /* Clock Inversion */ -#define AT91_SSC_CKI_FALLING (0 << 5) -#define AT91_SSC_CK_RISING (1 << 5) -#define AT91_SSC_CKG (1 << 6) /* Receive Clock Gating Selection [AT91SAM9261 only] */ -#define AT91_SSC_CKG_NONE (0 << 6) -#define AT91_SSC_CKG_RFLOW (1 << 6) -#define AT91_SSC_CKG_RFHIGH (2 << 6) -#define AT91_SSC_START (0xf << 8) /* Start Selection */ -#define AT91_SSC_START_CONTINUOUS (0 << 8) -#define AT91_SSC_START_TX_RX (1 << 8) -#define AT91_SSC_START_LOW_RF (2 << 8) -#define AT91_SSC_START_HIGH_RF (3 << 8) -#define AT91_SSC_START_FALLING_RF (4 << 8) -#define AT91_SSC_START_RISING_RF (5 << 8) -#define AT91_SSC_START_LEVEL_RF (6 << 8) -#define AT91_SSC_START_EDGE_RF (7 << 8) -#define AT91_SSC_STOP (1 << 12) /* Receive Stop Selection [AT91SAM9261 only] */ -#define AT91_SSC_STTDLY (0xff << 16) /* Start Delay */ -#define AT91_SSC_PERIOD (0xff << 24) /* Period Divider Selection */ - -#define AT91_SSC_RFMR 0x14 /* Receive Frame Mode Register */ -#define AT91_SSC_DATALEN (0x1f << 0) /* Data Length */ -#define AT91_SSC_LOOP (1 << 5) /* Loop Mode */ -#define AT91_SSC_MSBF (1 << 7) /* Most Significant Bit First */ -#define AT91_SSC_DATNB (0xf << 8) /* Data Number per Frame */ -#define AT91_SSC_FSLEN (0xf << 16) /* Frame Sync Length */ -#define AT91_SSC_FSOS (7 << 20) /* Frame Sync Output Selection */ -#define AT91_SSC_FSOS_NONE (0 << 20) -#define AT91_SSC_FSOS_NEGATIVE (1 << 20) -#define AT91_SSC_FSOS_POSITIVE (2 << 20) -#define AT91_SSC_FSOS_LOW (3 << 20) -#define AT91_SSC_FSOS_HIGH (4 << 20) -#define AT91_SSC_FSOS_TOGGLE (5 << 20) -#define AT91_SSC_FSEDGE (1 << 24) /* Frame Sync Edge Detection */ -#define AT91_SSC_FSEDGE_POSITIVE (0 << 24) -#define AT91_SSC_FSEDGE_NEGATIVE (1 << 24) - -#define AT91_SSC_TCMR 0x18 /* Transmit Clock Mode Register */ -#define AT91_SSC_TFMR 0x1c /* Transmit Fram Mode Register */ -#define AT91_SSC_DATDEF (1 << 5) /* Data Default Value */ -#define AT91_SSC_FSDEN (1 << 23) /* Frame Sync Data Enable */ - -#define AT91_SSC_RHR 0x20 /* Receive Holding Register */ -#define AT91_SSC_THR 0x24 /* Transmit Holding Register */ -#define AT91_SSC_RSHR 0x30 /* Receive Sync Holding Register */ -#define AT91_SSC_TSHR 0x34 /* Transmit Sync Holding Register */ - -#define AT91_SSC_RC0R 0x38 /* Receive Compare 0 Register [AT91SAM9261 only] */ -#define AT91_SSC_RC1R 0x3c /* Receive Compare 1 Register [AT91SAM9261 only] */ - -#define AT91_SSC_SR 0x40 /* Status Register */ -#define AT91_SSC_TXRDY (1 << 0) /* Transmit Ready */ -#define AT91_SSC_TXEMPTY (1 << 1) /* Transmit Empty */ -#define AT91_SSC_ENDTX (1 << 2) /* End of Transmission */ -#define AT91_SSC_TXBUFE (1 << 3) /* Transmit Buffer Empty */ -#define AT91_SSC_RXRDY (1 << 4) /* Receive Ready */ -#define AT91_SSC_OVRUN (1 << 5) /* Receive Overrun */ -#define AT91_SSC_ENDRX (1 << 6) /* End of Reception */ -#define AT91_SSC_RXBUFF (1 << 7) /* Receive Buffer Full */ -#define AT91_SSC_CP0 (1 << 8) /* Compare 0 [AT91SAM9261 only] */ -#define AT91_SSC_CP1 (1 << 9) /* Compare 1 [AT91SAM9261 only] */ -#define AT91_SSC_TXSYN (1 << 10) /* Transmit Sync */ -#define AT91_SSC_RXSYN (1 << 11) /* Receive Sync */ -#define AT91_SSC_TXENA (1 << 16) /* Transmit Enable */ -#define AT91_SSC_RXENA (1 << 17) /* Receive Enable */ - -#define AT91_SSC_IER 0x44 /* Interrupt Enable Register */ -#define AT91_SSC_IDR 0x48 /* Interrupt Disable Register */ -#define AT91_SSC_IMR 0x4c /* Interrupt Mask Register */ - -#endif diff --git a/arch/arm/mach-at91/include/mach/entry-macro.S b/arch/arm/mach-at91/include/mach/entry-macro.S deleted file mode 100644 index 903bf205a333371793ce6e673460b4a23ff358ef..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/entry-macro.S +++ /dev/null @@ -1,27 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/entry-macro.S - * - * Copyright (C) 2003-2005 SAN People - * - * Low-level IRQ helper macros for AT91RM9200 platforms - * - * This file is licensed under the terms of the GNU General Public - * License version 2. This program is licensed "as is" without any - * warranty of any kind, whether express or implied. - */ - -#include -#include - - .macro get_irqnr_preamble, base, tmp - ldr \base, =at91_aic_base @ base virtual address of AIC peripheral - ldr \base, [\base] - .endm - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - ldr \irqnr, [\base, #AT91_AIC_IVR] @ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt) - ldr \irqstat, [\base, #AT91_AIC_ISR] @ read interrupt source number - teq \irqstat, #0 @ ISR is 0 when no current interrupt, or spurious interrupt - streq \tmp, [\base, #AT91_AIC_EOICR] @ not going to be handled further, then ACK it now. - .endm - diff --git a/arch/arm/mach-at91/irq.c b/arch/arm/mach-at91/irq.c index cfcfcbe362699d1ed04be46e2d9680bc89917e58..1e02c0e49dccb76949be0fc9d855a5a3bb3504bc 100644 --- a/arch/arm/mach-at91/irq.c +++ b/arch/arm/mach-at91/irq.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include #include @@ -30,38 +31,218 @@ #include #include #include +#include #include #include #include +#include #include #include #include +#include + void __iomem *at91_aic_base; static struct irq_domain *at91_aic_domain; static struct device_node *at91_aic_np; +static unsigned int n_irqs = NR_AIC_IRQS; +static unsigned long at91_aic_caps = 0; + +/* AIC5 introduces a Source Select Register */ +#define AT91_AIC_CAP_AIC5 (1 << 0) +#define has_aic5() (at91_aic_caps & AT91_AIC_CAP_AIC5) + +#ifdef CONFIG_PM + +static unsigned long *wakeups; +static unsigned long *backups; + +#define set_backup(bit) set_bit(bit, backups) +#define clear_backup(bit) clear_bit(bit, backups) + +static int at91_aic_pm_init(void) +{ + backups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL); + if (!backups) + return -ENOMEM; + + wakeups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL); + if (!wakeups) { + kfree(backups); + return -ENOMEM; + } + + return 0; +} + +static int at91_aic_set_wake(struct irq_data *d, unsigned value) +{ + if (unlikely(d->hwirq >= n_irqs)) + return -EINVAL; + + if (value) + set_bit(d->hwirq, wakeups); + else + clear_bit(d->hwirq, wakeups); + + return 0; +} + +void at91_irq_suspend(void) +{ + int i = 0, bit; + + if (has_aic5()) { + /* disable enabled irqs */ + while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + i = bit; + } + /* enable wakeup irqs */ + i = 0; + while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IECR, 1); + i = bit; + } + } else { + at91_aic_write(AT91_AIC_IDCR, *backups); + at91_aic_write(AT91_AIC_IECR, *wakeups); + } +} + +void at91_irq_resume(void) +{ + int i = 0, bit; + + if (has_aic5()) { + /* disable wakeup irqs */ + while ((bit = find_next_bit(wakeups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + i = bit; + } + /* enable irqs disabled for suspend */ + i = 0; + while ((bit = find_next_bit(backups, n_irqs, i)) < n_irqs) { + at91_aic_write(AT91_AIC5_SSR, + bit & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IECR, 1); + i = bit; + } + } else { + at91_aic_write(AT91_AIC_IDCR, *wakeups); + at91_aic_write(AT91_AIC_IECR, *backups); + } +} + +#else +static inline int at91_aic_pm_init(void) +{ + return 0; +} + +#define set_backup(bit) +#define clear_backup(bit) +#define at91_aic_set_wake NULL + +#endif /* CONFIG_PM */ + +asmlinkage void __exception_irq_entry +at91_aic_handle_irq(struct pt_regs *regs) +{ + u32 irqnr; + u32 irqstat; + + irqnr = at91_aic_read(AT91_AIC_IVR); + irqstat = at91_aic_read(AT91_AIC_ISR); + + /* + * ISR value is 0 when there is no current interrupt or when there is + * a spurious interrupt + */ + if (!irqstat) + at91_aic_write(AT91_AIC_EOICR, 0); + else + handle_IRQ(irqnr, regs); +} + +asmlinkage void __exception_irq_entry +at91_aic5_handle_irq(struct pt_regs *regs) +{ + u32 irqnr; + u32 irqstat; + + irqnr = at91_aic_read(AT91_AIC5_IVR); + irqstat = at91_aic_read(AT91_AIC5_ISR); + + if (!irqstat) + at91_aic_write(AT91_AIC5_EOICR, 0); + else + handle_IRQ(irqnr, regs); +} static void at91_aic_mask_irq(struct irq_data *d) { /* Disable interrupt on AIC */ at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq); + /* Update ISR cache */ + clear_backup(d->hwirq); +} + +static void __maybe_unused at91_aic5_mask_irq(struct irq_data *d) +{ + /* Disable interrupt on AIC5 */ + at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + /* Update ISR cache */ + clear_backup(d->hwirq); } static void at91_aic_unmask_irq(struct irq_data *d) { /* Enable interrupt on AIC */ at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq); + /* Update ISR cache */ + set_backup(d->hwirq); +} + +static void __maybe_unused at91_aic5_unmask_irq(struct irq_data *d) +{ + /* Enable interrupt on AIC5 */ + at91_aic_write(AT91_AIC5_SSR, d->hwirq & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IECR, 1); + /* Update ISR cache */ + set_backup(d->hwirq); } -unsigned int at91_extern_irq; +static void at91_aic_eoi(struct irq_data *d) +{ + /* + * Mark end-of-interrupt on AIC, the controller doesn't care about + * the value written. Moreover it's a write-only register. + */ + at91_aic_write(AT91_AIC_EOICR, 0); +} + +static void __maybe_unused at91_aic5_eoi(struct irq_data *d) +{ + at91_aic_write(AT91_AIC5_EOICR, 0); +} -#define is_extern_irq(hwirq) ((1 << (hwirq)) & at91_extern_irq) +unsigned long *at91_extern_irq; -static int at91_aic_set_type(struct irq_data *d, unsigned type) +#define is_extern_irq(hwirq) test_bit(hwirq, at91_extern_irq) + +static int at91_aic_compute_srctype(struct irq_data *d, unsigned type) { - unsigned int smr, srctype; + int srctype; switch (type) { case IRQ_TYPE_LEVEL_HIGH: @@ -74,65 +255,51 @@ static int at91_aic_set_type(struct irq_data *d, unsigned type) if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_LOW; else - return -EINVAL; + srctype = -EINVAL; break; case IRQ_TYPE_EDGE_FALLING: if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */ srctype = AT91_AIC_SRCTYPE_FALLING; else - return -EINVAL; + srctype = -EINVAL; break; default: - return -EINVAL; + srctype = -EINVAL; } - smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE; - at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); - return 0; + return srctype; } -#ifdef CONFIG_PM - -static u32 wakeups; -static u32 backups; - -static int at91_aic_set_wake(struct irq_data *d, unsigned value) +static int at91_aic_set_type(struct irq_data *d, unsigned type) { - if (unlikely(d->hwirq >= NR_AIC_IRQS)) - return -EINVAL; - - if (value) - wakeups |= (1 << d->hwirq); - else - wakeups &= ~(1 << d->hwirq); + unsigned int smr; + int srctype; + + srctype = at91_aic_compute_srctype(d, type); + if (srctype < 0) + return srctype; + + if (has_aic5()) { + at91_aic_write(AT91_AIC5_SSR, + d->hwirq & AT91_AIC5_INTSEL_MSK); + smr = at91_aic_read(AT91_AIC5_SMR) & ~AT91_AIC_SRCTYPE; + at91_aic_write(AT91_AIC5_SMR, smr | srctype); + } else { + smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) + & ~AT91_AIC_SRCTYPE; + at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype); + } return 0; } -void at91_irq_suspend(void) -{ - backups = at91_aic_read(AT91_AIC_IMR); - at91_aic_write(AT91_AIC_IDCR, backups); - at91_aic_write(AT91_AIC_IECR, wakeups); -} - -void at91_irq_resume(void) -{ - at91_aic_write(AT91_AIC_IDCR, wakeups); - at91_aic_write(AT91_AIC_IECR, backups); -} - -#else -#define at91_aic_set_wake NULL -#endif - static struct irq_chip at91_aic_chip = { .name = "AIC", - .irq_ack = at91_aic_mask_irq, .irq_mask = at91_aic_mask_irq, .irq_unmask = at91_aic_unmask_irq, .irq_set_type = at91_aic_set_type, .irq_set_wake = at91_aic_set_wake, + .irq_eoi = at91_aic_eoi, }; static void __init at91_aic_hw_init(unsigned int spu_vector) @@ -161,41 +328,172 @@ static void __init at91_aic_hw_init(unsigned int spu_vector) at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF); } +static void __init __maybe_unused at91_aic5_hw_init(unsigned int spu_vector) +{ + int i; + + /* + * Perform 8 End Of Interrupt Command to make sure AIC + * will not Lock out nIRQ + */ + for (i = 0; i < 8; i++) + at91_aic_write(AT91_AIC5_EOICR, 0); + + /* + * Spurious Interrupt ID in Spurious Vector Register. + * When there is no current interrupt, the IRQ Vector Register + * reads the value stored in AIC_SPU + */ + at91_aic_write(AT91_AIC5_SPU, spu_vector); + + /* No debugging in AIC: Debug (Protect) Control Register */ + at91_aic_write(AT91_AIC5_DCR, 0); + + /* Disable and clear all interrupts initially */ + for (i = 0; i < n_irqs; i++) { + at91_aic_write(AT91_AIC5_SSR, i & AT91_AIC5_INTSEL_MSK); + at91_aic_write(AT91_AIC5_IDCR, 1); + at91_aic_write(AT91_AIC5_ICCR, 1); + } +} + #if defined(CONFIG_OF) +static unsigned int *at91_aic_irq_priorities; + static int at91_aic_irq_map(struct irq_domain *h, unsigned int virq, irq_hw_number_t hw) { /* Put virq number in Source Vector Register */ at91_aic_write(AT91_AIC_SVR(hw), virq); - /* Active Low interrupt, without priority */ - at91_aic_write(AT91_AIC_SMR(hw), AT91_AIC_SRCTYPE_LOW); + /* Active Low interrupt, with priority */ + at91_aic_write(AT91_AIC_SMR(hw), + AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]); - irq_set_chip_and_handler(virq, &at91_aic_chip, handle_level_irq); + irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq); set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); return 0; } +static int at91_aic5_irq_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) +{ + at91_aic_write(AT91_AIC5_SSR, hw & AT91_AIC5_INTSEL_MSK); + + /* Put virq number in Source Vector Register */ + at91_aic_write(AT91_AIC5_SVR, virq); + + /* Active Low interrupt, with priority */ + at91_aic_write(AT91_AIC5_SMR, + AT91_AIC_SRCTYPE_LOW | at91_aic_irq_priorities[hw]); + + irq_set_chip_and_handler(virq, &at91_aic_chip, handle_fasteoi_irq); + set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + + return 0; +} + +static int at91_aic_irq_domain_xlate(struct irq_domain *d, struct device_node *ctrlr, + const u32 *intspec, unsigned int intsize, + irq_hw_number_t *out_hwirq, unsigned int *out_type) +{ + if (WARN_ON(intsize < 3)) + return -EINVAL; + if (WARN_ON(intspec[0] >= n_irqs)) + return -EINVAL; + if (WARN_ON((intspec[2] < AT91_AIC_IRQ_MIN_PRIORITY) + || (intspec[2] > AT91_AIC_IRQ_MAX_PRIORITY))) + return -EINVAL; + + *out_hwirq = intspec[0]; + *out_type = intspec[1] & IRQ_TYPE_SENSE_MASK; + at91_aic_irq_priorities[*out_hwirq] = intspec[2]; + + return 0; +} + static struct irq_domain_ops at91_aic_irq_ops = { .map = at91_aic_irq_map, - .xlate = irq_domain_xlate_twocell, + .xlate = at91_aic_irq_domain_xlate, }; -int __init at91_aic_of_init(struct device_node *node, - struct device_node *parent) +int __init at91_aic_of_common_init(struct device_node *node, + struct device_node *parent) { + struct property *prop; + const __be32 *p; + u32 val; + + at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs) + * sizeof(*at91_extern_irq), GFP_KERNEL); + if (!at91_extern_irq) + return -ENOMEM; + + if (at91_aic_pm_init()) { + kfree(at91_extern_irq); + return -ENOMEM; + } + + at91_aic_irq_priorities = kzalloc(n_irqs + * sizeof(*at91_aic_irq_priorities), + GFP_KERNEL); + if (!at91_aic_irq_priorities) + return -ENOMEM; + at91_aic_base = of_iomap(node, 0); at91_aic_np = node; - at91_aic_domain = irq_domain_add_linear(at91_aic_np, NR_AIC_IRQS, + at91_aic_domain = irq_domain_add_linear(at91_aic_np, n_irqs, &at91_aic_irq_ops, NULL); if (!at91_aic_domain) panic("Unable to add AIC irq domain (DT)\n"); + of_property_for_each_u32(node, "atmel,external-irqs", prop, p, val) { + if (val >= n_irqs) + pr_warn("AIC: external irq %d >= %d skip it\n", + val, n_irqs); + else + set_bit(val, at91_extern_irq); + } + irq_set_default_host(at91_aic_domain); - at91_aic_hw_init(NR_AIC_IRQS); + return 0; +} + +int __init at91_aic_of_init(struct device_node *node, + struct device_node *parent) +{ + int err; + + err = at91_aic_of_common_init(node, parent); + if (err) + return err; + + at91_aic_hw_init(n_irqs); + + return 0; +} + +int __init at91_aic5_of_init(struct device_node *node, + struct device_node *parent) +{ + int err; + + at91_aic_caps |= AT91_AIC_CAP_AIC5; + n_irqs = NR_AIC5_IRQS; + at91_aic_chip.irq_ack = at91_aic5_mask_irq; + at91_aic_chip.irq_mask = at91_aic5_mask_irq; + at91_aic_chip.irq_unmask = at91_aic5_unmask_irq; + at91_aic_chip.irq_eoi = at91_aic5_eoi; + at91_aic_irq_ops.map = at91_aic5_irq_map; + + err = at91_aic_of_common_init(node, parent); + if (err) + return err; + + at91_aic5_hw_init(n_irqs); return 0; } @@ -204,22 +502,25 @@ int __init at91_aic_of_init(struct device_node *node, /* * Initialize the AIC interrupt controller. */ -void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS]) +void __init at91_aic_init(unsigned int *priority) { unsigned int i; int irq_base; + if (at91_aic_pm_init()) + panic("Unable to allocate bit maps\n"); + at91_aic_base = ioremap(AT91_AIC, 512); if (!at91_aic_base) panic("Unable to ioremap AIC registers\n"); /* Add irq domain for AIC */ - irq_base = irq_alloc_descs(-1, 0, NR_AIC_IRQS, 0); + irq_base = irq_alloc_descs(-1, 0, n_irqs, 0); if (irq_base < 0) { WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n"); irq_base = 0; } - at91_aic_domain = irq_domain_add_legacy(at91_aic_np, NR_AIC_IRQS, + at91_aic_domain = irq_domain_add_legacy(at91_aic_np, n_irqs, irq_base, 0, &irq_domain_simple_ops, NULL); @@ -232,15 +533,14 @@ void __init at91_aic_init(unsigned int priority[NR_AIC_IRQS]) * The IVR is used by macro get_irqnr_and_base to read and verify. * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred. */ - for (i = 0; i < NR_AIC_IRQS; i++) { + for (i = 0; i < n_irqs; i++) { /* Put hardware irq number in Source Vector Register: */ - at91_aic_write(AT91_AIC_SVR(i), i); + at91_aic_write(AT91_AIC_SVR(i), NR_IRQS_LEGACY + i); /* Active Low interrupt, with the specified priority */ at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]); - - irq_set_chip_and_handler(i, &at91_aic_chip, handle_level_irq); + irq_set_chip_and_handler(NR_IRQS_LEGACY + i, &at91_aic_chip, handle_fasteoi_irq); set_irq_flags(i, IRQF_VALID | IRQF_PROBE); } - at91_aic_hw_init(NR_AIC_IRQS); + at91_aic_hw_init(n_irqs); } diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 1bfaad628731b262c474bc23217a30f4119eece3..2c2d86505a541fe1964f3f717d7e81c04f9e6a30 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -25,6 +25,7 @@ #include #include +#include #include #include diff --git a/arch/arm/mach-clps711x/common.c b/arch/arm/mach-clps711x/common.c index c965fd8eb31a14de7478eaaea8a395ab3816bbc8..f15293bd797437805dd7fcf20a6ac062512144ec 100644 --- a/arch/arm/mach-clps711x/common.c +++ b/arch/arm/mach-clps711x/common.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include @@ -188,7 +187,6 @@ static struct irqaction clps711x_timer_irq = { static void __init clps711x_timer_init(void) { - struct timespec tv; unsigned int syscon; syscon = clps_readl(SYSCON1); @@ -198,10 +196,6 @@ static void __init clps711x_timer_init(void) clps_writel(LATCH-1, TC2D); /* 512kHz / 100Hz - 1 */ setup_irq(IRQ_TC2OI, &clps711x_timer_irq); - - tv.tv_nsec = 0; - tv.tv_sec = clps_readl(RTCDR); - do_settimeofday(&tv); } struct sys_timer clps711x_timer = { diff --git a/arch/arm/mach-clps711x/include/mach/memory.h b/arch/arm/mach-clps711x/include/mach/memory.h index 3a032a67725c0d0179ddf84102c9d7ebbcbb7127..fc0e028d9405c53cfc9d20e9a726dae59bbe90b6 100644 --- a/arch/arm/mach-clps711x/include/mach/memory.h +++ b/arch/arm/mach-clps711x/include/mach/memory.h @@ -25,26 +25,6 @@ */ #define PLAT_PHYS_OFFSET UL(0xc0000000) -#if !defined(CONFIG_ARCH_CDB89712) && !defined (CONFIG_ARCH_AUTCPU12) - -#define __virt_to_bus(x) ((x) - PAGE_OFFSET) -#define __bus_to_virt(x) ((x) + PAGE_OFFSET) -#define __pfn_to_bus(x) (__pfn_to_phys(x) - PHYS_OFFSET) -#define __bus_to_pfn(x) __phys_to_pfn((x) + PHYS_OFFSET) - -#endif - - -/* - * Like the SA1100, the EDB7211 has a large gap between physical RAM - * banks. In 2.2, the Psion (CL-PS7110) port added custom support for - * discontiguous physical memory. In 2.4, we can use the standard - * Linux NUMA support. - * - * This is not necessary for EP7211 implementations with only one used - * memory bank. For those systems, simply undefine CONFIG_DISCONTIGMEM. - */ - /* * The PS7211 allows up to 256MB max per DRAM bank, but the EDB7211 * uses only one of the two banks (bank #1). However, even within @@ -54,23 +34,6 @@ * them, so we use 24 for the node max shift to get 16MB node sizes. */ -/* - * Because of the wide memory address space between physical RAM banks on the - * SA1100, it's much more convenient to use Linux's NUMA support to implement - * our memory map representation. Assuming all memory nodes have equal access - * characteristics, we then have generic discontiguous memory support. - * - * Of course, all this isn't mandatory for SA1100 implementations with only - * one used memory bank. For those, simply undefine CONFIG_DISCONTIGMEM. - * - * The nodes are matched with the physical memory bank addresses which are - * incidentally the same as virtual addresses. - * - * node 0: 0xc0000000 - 0xc7ffffff - * node 1: 0xc8000000 - 0xcfffffff - * node 2: 0xd0000000 - 0xd7ffffff - * node 3: 0xd8000000 - 0xdfffffff - */ #define SECTION_SIZE_BITS 24 #define MAX_PHYSMEM_BITS 32 diff --git a/arch/arm/mach-clps711x/p720t.c b/arch/arm/mach-clps711x/p720t.c index 42ee8f33eafbaf7421c6db5b5dd0630971fc660b..f266d90b9efc0e8a4cc79b92b8ece9214c31c2e7 100644 --- a/arch/arm/mach-clps711x/p720t.c +++ b/arch/arm/mach-clps711x/p720t.c @@ -86,17 +86,7 @@ static void __init p720t_map_io(void) iotable_init(p720t_io_desc, ARRAY_SIZE(p720t_io_desc)); } -MACHINE_START(P720T, "ARM-Prospector720T") - /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ - .atag_offset = 0x100, - .fixup = fixup_p720t, - .map_io = p720t_map_io, - .init_irq = clps711x_init_irq, - .timer = &clps711x_timer, - .restart = clps711x_restart, -MACHINE_END - -static int p720t_hw_init(void) +static void __init p720t_init_early(void) { /* * Power down as much as possible in case we don't @@ -111,13 +101,19 @@ static int p720t_hw_init(void) PLD_CODEC = 0; PLD_TCH = 0; PLD_SPI = 0; -#ifndef CONFIG_DEBUG_LL - PLD_COM2 = 0; - PLD_COM1 = 0; -#endif - - return 0; + if (!IS_ENABLED(CONFIG_DEBUG_LL)) { + PLD_COM2 = 0; + PLD_COM1 = 0; + } } -__initcall(p720t_hw_init); - +MACHINE_START(P720T, "ARM-Prospector720T") + /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ + .atag_offset = 0x100, + .fixup = fixup_p720t, + .init_early = p720t_init_early, + .map_io = p720t_map_io, + .init_irq = clps711x_init_irq, + .timer = &clps711x_timer, + .restart = clps711x_restart, +MACHINE_END diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index 32d837d8eab97ded50f9d861faee3b16f3fb0dd0..ab99c3c3b752689e50db5720e2d36beb23ee2b21 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,6 +4,7 @@ config AINTC bool config CP_INTC + select IRQ_DOMAIN bool config ARCH_DAVINCI_DMx @@ -61,7 +62,6 @@ config MACH_DAVINCI_EVM bool "TI DM644x EVM" default ARCH_DAVINCI_DM644x depends on ARCH_DAVINCI_DM644x - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -71,7 +71,6 @@ config MACH_DAVINCI_EVM config MACH_SFFSDR bool "Lyrtech SFFSDR" depends on ARCH_DAVINCI_DM644x - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -105,7 +104,6 @@ config MACH_DAVINCI_DM6467_EVM default ARCH_DAVINCI_DM646x depends on ARCH_DAVINCI_DM646x select MACH_DAVINCI_DM6467TEVM - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -119,7 +117,6 @@ config MACH_DAVINCI_DM365_EVM bool "TI DM365 EVM" default ARCH_DAVINCI_DM365 depends on ARCH_DAVINCI_DM365 - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -131,7 +128,6 @@ config MACH_DAVINCI_DA830_EVM default ARCH_DAVINCI_DA830 depends on ARCH_DAVINCI_DA830 select GPIO_PCF857X - select MISC_DEVICES select EEPROM_AT24 select I2C help @@ -218,7 +214,6 @@ config MACH_TNETV107X config MACH_MITYOMAPL138 bool "Critical Link MityDSP-L138/MityARM-1808 SoM" depends on ARCH_DAVINCI_DA850 - select MISC_DEVICES select EEPROM_AT24 select I2C help diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile index 2db78bd5c835dbda436faf7184fc837b8eed8f0e..2227effcb0e98bdea4968b95617e06cf3c0b5f39 100644 --- a/arch/arm/mach-davinci/Makefile +++ b/arch/arm/mach-davinci/Makefile @@ -39,3 +39,4 @@ obj-$(CONFIG_MACH_OMAPL138_HAWKBOARD) += board-omapl138-hawk.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o obj-$(CONFIG_SUSPEND) += pm.o sleep.o +obj-$(CONFIG_HAVE_CLK) += pm_domain.o diff --git a/arch/arm/mach-davinci/cp_intc.c b/arch/arm/mach-davinci/cp_intc.c index f83152d643c5d58921a7b91a826a1790b7bbe4f9..006dae8dfe443b3474ae6df73b5c97cf93502f33 100644 --- a/arch/arm/mach-davinci/cp_intc.c +++ b/arch/arm/mach-davinci/cp_intc.c @@ -9,9 +9,14 @@ * kind, whether express or implied. */ +#include #include #include +#include #include +#include +#include +#include #include #include @@ -28,7 +33,7 @@ static inline void cp_intc_write(unsigned long value, unsigned offset) static void cp_intc_ack_irq(struct irq_data *d) { - cp_intc_write(d->irq, CP_INTC_SYS_STAT_IDX_CLR); + cp_intc_write(d->hwirq, CP_INTC_SYS_STAT_IDX_CLR); } /* Disable interrupt */ @@ -36,20 +41,20 @@ static void cp_intc_mask_irq(struct irq_data *d) { /* XXX don't know why we need to disable nIRQ here... */ cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_CLR); - cp_intc_write(d->irq, CP_INTC_SYS_ENABLE_IDX_CLR); + cp_intc_write(d->hwirq, CP_INTC_SYS_ENABLE_IDX_CLR); cp_intc_write(1, CP_INTC_HOST_ENABLE_IDX_SET); } /* Enable interrupt */ static void cp_intc_unmask_irq(struct irq_data *d) { - cp_intc_write(d->irq, CP_INTC_SYS_ENABLE_IDX_SET); + cp_intc_write(d->hwirq, CP_INTC_SYS_ENABLE_IDX_SET); } static int cp_intc_set_irq_type(struct irq_data *d, unsigned int flow_type) { - unsigned reg = BIT_WORD(d->irq); - unsigned mask = BIT_MASK(d->irq); + unsigned reg = BIT_WORD(d->hwirq); + unsigned mask = BIT_MASK(d->hwirq); unsigned polarity = cp_intc_read(CP_INTC_SYS_POLARITY(reg)); unsigned type = cp_intc_read(CP_INTC_SYS_TYPE(reg)); @@ -99,18 +104,43 @@ static struct irq_chip cp_intc_irq_chip = { .irq_set_wake = cp_intc_set_wake, }; -void __init cp_intc_init(void) +static struct irq_domain *cp_intc_domain; + +static int cp_intc_host_map(struct irq_domain *h, unsigned int virq, + irq_hw_number_t hw) { - unsigned long num_irq = davinci_soc_info.intc_irq_num; + pr_debug("cp_intc_host_map(%d, 0x%lx)\n", virq, hw); + + irq_set_chip(virq, &cp_intc_irq_chip); + set_irq_flags(virq, IRQF_VALID | IRQF_PROBE); + irq_set_handler(virq, handle_edge_irq); + return 0; +} + +static const struct irq_domain_ops cp_intc_host_ops = { + .map = cp_intc_host_map, + .xlate = irq_domain_xlate_onetwocell, +}; + +int __init cp_intc_of_init(struct device_node *node, struct device_node *parent) +{ + u32 num_irq = davinci_soc_info.intc_irq_num; u8 *irq_prio = davinci_soc_info.intc_irq_prios; u32 *host_map = davinci_soc_info.intc_host_map; unsigned num_reg = BITS_TO_LONGS(num_irq); - int i; + int i, irq_base; davinci_intc_type = DAVINCI_INTC_TYPE_CP_INTC; - davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K); + if (node) { + davinci_intc_base = of_iomap(node, 0); + if (of_property_read_u32(node, "ti,intc-size", &num_irq)) + pr_warn("unable to get intc-size, default to %d\n", + num_irq); + } else { + davinci_intc_base = ioremap(davinci_soc_info.intc_base, SZ_8K); + } if (WARN_ON(!davinci_intc_base)) - return; + return -EINVAL; cp_intc_write(0, CP_INTC_GLOBAL_ENABLE); @@ -165,13 +195,28 @@ void __init cp_intc_init(void) for (i = 0; host_map[i] != -1; i++) cp_intc_write(host_map[i], CP_INTC_HOST_MAP(i)); - /* Set up genirq dispatching for cp_intc */ - for (i = 0; i < num_irq; i++) { - irq_set_chip(i, &cp_intc_irq_chip); - set_irq_flags(i, IRQF_VALID | IRQF_PROBE); - irq_set_handler(i, handle_edge_irq); + irq_base = irq_alloc_descs(-1, 0, num_irq, 0); + if (irq_base < 0) { + pr_warn("Couldn't allocate IRQ numbers\n"); + irq_base = 0; + } + + /* create a legacy host */ + cp_intc_domain = irq_domain_add_legacy(node, num_irq, + irq_base, 0, &cp_intc_host_ops, NULL); + + if (!cp_intc_domain) { + pr_err("cp_intc: failed to allocate irq host!\n"); + return -EINVAL; } /* Enable global interrupt */ cp_intc_write(1, CP_INTC_GLOBAL_ENABLE); + + return 0; +} + +void __init cp_intc_init(void) +{ + cp_intc_of_init(NULL, NULL); } diff --git a/arch/arm/mach-davinci/include/mach/cp_intc.h b/arch/arm/mach-davinci/include/mach/cp_intc.h index 4e8190eed673dca87281134821ab5fa06ac477f7..d13d8dfa2b0d6c6d871c80a5ebdbb19f237476b7 100644 --- a/arch/arm/mach-davinci/include/mach/cp_intc.h +++ b/arch/arm/mach-davinci/include/mach/cp_intc.h @@ -52,5 +52,6 @@ #define CP_INTC_VECTOR_ADDR(n) (0x2000 + (n << 2)) void __init cp_intc_init(void); +int __init cp_intc_of_init(struct device_node *, struct device_node *); #endif /* __ASM_HARDWARE_CP_INTC_H */ diff --git a/arch/arm/mach-davinci/include/mach/dm365.h b/arch/arm/mach-davinci/include/mach/dm365.h deleted file mode 100644 index b9bf3d6a4423d1df178b343db065f55237dd4f8a..0000000000000000000000000000000000000000 --- a/arch/arm/mach-davinci/include/mach/dm365.h +++ /dev/null @@ -1 +0,0 @@ -/* empty, remove once unused */ diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h deleted file mode 100644 index b9bf3d6a4423d1df178b343db065f55237dd4f8a..0000000000000000000000000000000000000000 --- a/arch/arm/mach-davinci/include/mach/dm646x.h +++ /dev/null @@ -1 +0,0 @@ -/* empty, remove once unused */ diff --git a/arch/arm/mach-davinci/include/mach/entry-macro.S b/arch/arm/mach-davinci/include/mach/entry-macro.S index 768b3c0602140e789286b7182bb07e2b31336282..cf5f573eb5fd713c6d407bb752a870e7abbc0992 100644 --- a/arch/arm/mach-davinci/include/mach/entry-macro.S +++ b/arch/arm/mach-davinci/include/mach/entry-macro.S @@ -30,12 +30,10 @@ #endif #if defined(CONFIG_CP_INTC) 1001: ldr \irqnr, [\base, #0x80] /* get irq number */ + mov \tmp, \irqnr, lsr #31 and \irqnr, \irqnr, #0xff /* irq is in bits 0-9 */ - mov \tmp, \irqnr, lsr #3 - and \tmp, \tmp, #0xfc - add \tmp, \tmp, #0x280 /* get the register offset */ - ldr \irqstat, [\base, \tmp] /* get the intc status */ - cmp \irqstat, #0x0 + and \tmp, \tmp, #0x1 + cmp \tmp, #0x1 #endif 1002: .endm diff --git a/arch/arm/mach-davinci/pm_domain.c b/arch/arm/mach-davinci/pm_domain.c new file mode 100644 index 0000000000000000000000000000000000000000..00946e23c1ee3100a2027a2e1d918d261ca89517 --- /dev/null +++ b/arch/arm/mach-davinci/pm_domain.c @@ -0,0 +1,64 @@ +/* + * Runtime PM support code for DaVinci + * + * Author: Kevin Hilman + * + * Copyright (C) 2012 Texas Instruments, Inc. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ +#include +#include +#include +#include + +#ifdef CONFIG_PM_RUNTIME +static int davinci_pm_runtime_suspend(struct device *dev) +{ + int ret; + + dev_dbg(dev, "%s\n", __func__); + + ret = pm_generic_runtime_suspend(dev); + if (ret) + return ret; + + ret = pm_clk_suspend(dev); + if (ret) { + pm_generic_runtime_resume(dev); + return ret; + } + + return 0; +} + +static int davinci_pm_runtime_resume(struct device *dev) +{ + dev_dbg(dev, "%s\n", __func__); + + pm_clk_resume(dev); + return pm_generic_runtime_resume(dev); +} +#endif + +static struct dev_pm_domain davinci_pm_domain = { + .ops = { + SET_RUNTIME_PM_OPS(davinci_pm_runtime_suspend, + davinci_pm_runtime_resume, NULL) + USE_PLATFORM_PM_SLEEP_OPS + }, +}; + +static struct pm_clk_notifier_block platform_bus_notifier = { + .pm_domain = &davinci_pm_domain, +}; + +static int __init davinci_pm_runtime_init(void) +{ + pm_clk_add_notifier(&platform_bus_type, &platform_bus_notifier); + + return 0; +} +core_initcall(davinci_pm_runtime_init); diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h index 226949dc4ac04a242c40e215d23818421342b99c..f953bb54aa9d31d590791d97aaaf770aaaecfd93 100644 --- a/arch/arm/mach-dove/include/mach/bridge-regs.h +++ b/arch/arm/mach-dove/include/mach/bridge-regs.h @@ -50,5 +50,6 @@ #define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c) #define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) #endif diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index ad1165d488c13f393bf352a00f0e03b62265f3cc..d52b0ef313b7e53c2efa6de67d0ddeddc4790ca5 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -78,6 +78,7 @@ /* North-South Bridge */ #define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000) +#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000) /* Cryptographic Engine */ #define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000) diff --git a/arch/arm/mach-ep93xx/core.c b/arch/arm/mach-ep93xx/core.c index 4dd07a0e3604a19498cf4fa507b544a666e2d8a5..4afe52aaaff3573e97e6d46ba479b56303445f89 100644 --- a/arch/arm/mach-ep93xx/core.c +++ b/arch/arm/mach-ep93xx/core.c @@ -797,6 +797,102 @@ static struct platform_device ep93xx_wdt_device = { .resource = ep93xx_wdt_resources, }; +/************************************************************************* + * EP93xx IDE + *************************************************************************/ +static struct resource ep93xx_ide_resources[] = { + DEFINE_RES_MEM(EP93XX_IDE_PHYS_BASE, 0x38), + DEFINE_RES_IRQ(IRQ_EP93XX_EXT3), +}; + +static struct platform_device ep93xx_ide_device = { + .name = "ep93xx-ide", + .id = -1, + .dev = { + .dma_mask = &ep93xx_ide_device.dev.coherent_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .num_resources = ARRAY_SIZE(ep93xx_ide_resources), + .resource = ep93xx_ide_resources, +}; + +void __init ep93xx_register_ide(void) +{ + platform_device_register(&ep93xx_ide_device); +} + +int ep93xx_ide_acquire_gpio(struct platform_device *pdev) +{ + int err; + int i; + + err = gpio_request(EP93XX_GPIO_LINE_EGPIO2, dev_name(&pdev->dev)); + if (err) + return err; + err = gpio_request(EP93XX_GPIO_LINE_EGPIO15, dev_name(&pdev->dev)); + if (err) + goto fail_egpio15; + for (i = 2; i < 8; i++) { + err = gpio_request(EP93XX_GPIO_LINE_E(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_e; + } + for (i = 4; i < 8; i++) { + err = gpio_request(EP93XX_GPIO_LINE_G(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_g; + } + for (i = 0; i < 8; i++) { + err = gpio_request(EP93XX_GPIO_LINE_H(i), dev_name(&pdev->dev)); + if (err) + goto fail_gpio_h; + } + + /* GPIO ports E[7:2], G[7:4] and H used by IDE */ + ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_EONIDE | + EP93XX_SYSCON_DEVCFG_GONIDE | + EP93XX_SYSCON_DEVCFG_HONIDE); + return 0; + +fail_gpio_h: + for (--i; i >= 0; --i) + gpio_free(EP93XX_GPIO_LINE_H(i)); + i = 8; +fail_gpio_g: + for (--i; i >= 4; --i) + gpio_free(EP93XX_GPIO_LINE_G(i)); + i = 8; +fail_gpio_e: + for (--i; i >= 2; --i) + gpio_free(EP93XX_GPIO_LINE_E(i)); + gpio_free(EP93XX_GPIO_LINE_EGPIO15); +fail_egpio15: + gpio_free(EP93XX_GPIO_LINE_EGPIO2); + return err; +} +EXPORT_SYMBOL(ep93xx_ide_acquire_gpio); + +void ep93xx_ide_release_gpio(struct platform_device *pdev) +{ + int i; + + for (i = 2; i < 8; i++) + gpio_free(EP93XX_GPIO_LINE_E(i)); + for (i = 4; i < 8; i++) + gpio_free(EP93XX_GPIO_LINE_G(i)); + for (i = 0; i < 8; i++) + gpio_free(EP93XX_GPIO_LINE_H(i)); + gpio_free(EP93XX_GPIO_LINE_EGPIO15); + gpio_free(EP93XX_GPIO_LINE_EGPIO2); + + + /* GPIO ports E[7:2], G[7:4] and H used by GPIO */ + ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_EONIDE | + EP93XX_SYSCON_DEVCFG_GONIDE | + EP93XX_SYSCON_DEVCFG_HONIDE); +} +EXPORT_SYMBOL(ep93xx_ide_release_gpio); + void __init ep93xx_init_devices(void) { /* Disallow access to MaverickCrunch initially */ diff --git a/arch/arm/mach-ep93xx/edb93xx.c b/arch/arm/mach-ep93xx/edb93xx.c index d74c5cddb98b654972ae986489f90c0e700aa190..337ab7cf4c16fc81391883c435e2be66d1f44298 100644 --- a/arch/arm/mach-ep93xx/edb93xx.c +++ b/arch/arm/mach-ep93xx/edb93xx.c @@ -91,8 +91,8 @@ static void __init edb93xx_register_i2c(void) ep93xx_register_i2c(&edb93xx_i2c_gpio_data, edb93xxa_i2c_board_info, ARRAY_SIZE(edb93xxa_i2c_board_info)); - } else if (machine_is_edb9307() || machine_is_edb9312() || - machine_is_edb9315()) { + } else if (machine_is_edb9302() || machine_is_edb9307() + || machine_is_edb9312() || machine_is_edb9315()) { ep93xx_register_i2c(&edb93xx_i2c_gpio_data, edb93xx_i2c_board_info, ARRAY_SIZE(edb93xx_i2c_board_info)); @@ -233,6 +233,29 @@ static void __init edb93xx_register_fb(void) } +/************************************************************************* + * EDB93xx IDE + *************************************************************************/ +static int __init edb93xx_has_ide(void) +{ + /* + * Although EDB9312 and EDB9315 do have IDE capability, they have + * INTRQ line wired as pull-up, which makes using IDE interface + * problematic. + */ + return machine_is_edb9312() || machine_is_edb9315() || + machine_is_edb9315a(); +} + +static void __init edb93xx_register_ide(void) +{ + if (!edb93xx_has_ide()) + return; + + ep93xx_register_ide(); +} + + static void __init edb93xx_init_machine(void) { ep93xx_init_devices(); @@ -243,6 +266,7 @@ static void __init edb93xx_init_machine(void) edb93xx_register_i2s(); edb93xx_register_pwm(); edb93xx_register_fb(); + edb93xx_register_ide(); } diff --git a/arch/arm/mach-ep93xx/include/mach/platform.h b/arch/arm/mach-ep93xx/include/mach/platform.h index 1ecb040d98bf7f3e390f76473ec85c7c50e377a3..33a5122c6dc8bac0954655a5d5795b12a0d0df85 100644 --- a/arch/arm/mach-ep93xx/include/mach/platform.h +++ b/arch/arm/mach-ep93xx/include/mach/platform.h @@ -48,6 +48,9 @@ void ep93xx_register_i2s(void); int ep93xx_i2s_acquire(void); void ep93xx_i2s_release(void); void ep93xx_register_ac97(void); +void ep93xx_register_ide(void); +int ep93xx_ide_acquire_gpio(struct platform_device *pdev); +void ep93xx_ide_release_gpio(struct platform_device *pdev); void ep93xx_init_devices(void); extern struct sys_timer ep93xx_timer; diff --git a/arch/arm/mach-ep93xx/soc.h b/arch/arm/mach-ep93xx/soc.h index 979fba72292628e8bddd22ba7660df9514bb2ebb..7bf7ff8beae73f28aec97693a9cda48c6a8212bf 100644 --- a/arch/arm/mach-ep93xx/soc.h +++ b/arch/arm/mach-ep93xx/soc.h @@ -69,6 +69,7 @@ #define EP93XX_BOOT_ROM_BASE EP93XX_AHB_IOMEM(0x00090000) +#define EP93XX_IDE_PHYS_BASE EP93XX_AHB_PHYS(0x000a0000) #define EP93XX_IDE_BASE EP93XX_AHB_IOMEM(0x000a0000) #define EP93XX_VIC1_BASE EP93XX_AHB_IOMEM(0x000b0000) diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 573be57d3d2805c70f24ab3b4dd29e1b3e6e3843..b5b4c8c9db11adfe4a78d642a910207846abffbe 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -207,12 +207,13 @@ config MACH_SMDKV310 select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 + select S3C_DEV_USB_HSOTG select SAMSUNG_DEV_BACKLIGHT select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select SAMSUNG_DEV_PWM select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 @@ -264,7 +265,7 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_ONENAND select S5P_DEV_TV select EXYNOS_DEV_SYSMMU - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 @@ -303,7 +304,7 @@ config MACH_NURI select S5P_DEV_MFC select S5P_DEV_USB_EHCI select S5P_SETUP_MIPIPHY - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS_DEV_DRM select EXYNOS4_SETUP_FIMC select EXYNOS4_SETUP_FIMD0 @@ -326,6 +327,7 @@ config MACH_ORIGEN select S3C_DEV_WDT select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 + select S3C_DEV_USB_HSOTG select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 @@ -341,7 +343,7 @@ config MACH_ORIGEN select SAMSUNG_DEV_PWM select EXYNOS_DEV_DRM select EXYNOS_DEV_SYSMMU - select EXYNOS4_DEV_DMA + select EXYNOS_DEV_DMA select EXYNOS4_DEV_USB_OHCI select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI @@ -360,22 +362,27 @@ config MACH_SMDK4212 select S3C_DEV_I2C3 select S3C_DEV_I2C7 select S3C_DEV_RTC + select S3C_DEV_USB_HSOTG select S3C_DEV_WDT select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_FIMD0 select S5P_DEV_MFC select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM select EXYNOS_DEV_SYSMMU select EXYNOS_DEV_DMA + select EXYNOS_DEV_DRM + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C7 select EXYNOS4_SETUP_KEYPAD select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY help Machine support for Samsung SMDK4212 diff --git a/arch/arm/mach-exynos/clock-exynos4.c b/arch/arm/mach-exynos/clock-exynos4.c index bcb7db45314599cd975a6ad904d199c881c4e6cf..26fe9de35ecb8ca715f73a4cee3955591b1e2b2a 100644 --- a/arch/arm/mach-exynos/clock-exynos4.c +++ b/arch/arm/mach-exynos/clock-exynos4.c @@ -586,17 +586,17 @@ static struct clk exynos4_init_clocks_off[] = { .ctrlbit = (1 << 13), }, { .name = "spi", - .devname = "s3c64xx-spi.0", + .devname = "exynos4210-spi.0", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 16), }, { .name = "spi", - .devname = "s3c64xx-spi.1", + .devname = "exynos4210-spi.1", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 17), }, { .name = "spi", - .devname = "s3c64xx-spi.2", + .devname = "exynos4210-spi.2", .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 18), }, { @@ -1242,40 +1242,67 @@ static struct clksrc_clk exynos4_clk_sclk_mmc3 = { .reg_div = { .reg = EXYNOS4_CLKDIV_FSYS2, .shift = 24, .size = 8 }, }; +static struct clksrc_clk exynos4_clk_mdout_spi0 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.0", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_mdout_spi1 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.1", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos4_clk_mdout_spi2 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.2", + }, + .sources = &exynos4_clkset_group, + .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 }, +}; + static struct clksrc_clk exynos4_clk_sclk_spi0 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.0", + .devname = "exynos4210-spi.0", + .parent = &exynos4_clk_mdout_spi0.clk, .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 16), }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 16, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 8, .size = 8 }, }; static struct clksrc_clk exynos4_clk_sclk_spi1 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.1", + .devname = "exynos4210-spi.1", + .parent = &exynos4_clk_mdout_spi1.clk, .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 20), }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 20, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL1, .shift = 24, .size = 8 }, }; static struct clksrc_clk exynos4_clk_sclk_spi2 = { .clk = { .name = "sclk_spi", - .devname = "s3c64xx-spi.2", + .devname = "exynos4210-spi.2", + .parent = &exynos4_clk_mdout_spi2.clk, .enable = exynos4_clksrc_mask_peril1_ctrl, .ctrlbit = (1 << 24), }, - .sources = &exynos4_clkset_group, - .reg_src = { .reg = EXYNOS4_CLKSRC_PERIL1, .shift = 24, .size = 4 }, - .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 0, .size = 4 }, + .reg_div = { .reg = EXYNOS4_CLKDIV_PERIL2, .shift = 8, .size = 8 }, }; /* Clock initialization code */ @@ -1331,7 +1358,9 @@ static struct clksrc_clk *exynos4_clksrc_cdev[] = { &exynos4_clk_sclk_spi0, &exynos4_clk_sclk_spi1, &exynos4_clk_sclk_spi2, - + &exynos4_clk_mdout_spi0, + &exynos4_clk_mdout_spi1, + &exynos4_clk_mdout_spi2, }; static struct clk_lookup exynos4_clk_lookup[] = { @@ -1347,9 +1376,9 @@ static struct clk_lookup exynos4_clk_lookup[] = { CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos4_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos4_clk_pdma1), CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos4_clk_mdma1), - CLKDEV_INIT("s3c64xx-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk), - CLKDEV_INIT("s3c64xx-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk), - CLKDEV_INIT("s3c64xx-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk), + CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos4_clk_sclk_spi0.clk), + CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos4_clk_sclk_spi1.clk), + CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos4_clk_sclk_spi2.clk), }; static int xtal_rate; diff --git a/arch/arm/mach-exynos/clock-exynos5.c b/arch/arm/mach-exynos/clock-exynos5.c index fefa336be2b4baf8d841a809766be3bdf9338f83..774533c670667c1a7a8e16986e7ababa841ee48e 100644 --- a/arch/arm/mach-exynos/clock-exynos5.c +++ b/arch/arm/mach-exynos/clock-exynos5.c @@ -131,6 +131,11 @@ static int exynos5_clksrc_mask_peric0_ctrl(struct clk *clk, int enable) return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC0, clk, enable); } +static int exynos5_clksrc_mask_peric1_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(EXYNOS5_CLKSRC_MASK_PERIC1, clk, enable); +} + static int exynos5_clk_ip_acp_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(EXYNOS5_CLKGATE_IP_ACP, clk, enable); @@ -740,6 +745,24 @@ static struct clk exynos5_init_clocks_off[] = { .parent = &exynos5_clk_aclk_66.clk, .enable = exynos5_clk_ip_peric_ctrl, .ctrlbit = (1 << 14), + }, { + .name = "spi", + .devname = "exynos4210-spi.0", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 16), + }, { + .name = "spi", + .devname = "exynos4210-spi.1", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 17), + }, { + .name = "spi", + .devname = "exynos4210-spi.2", + .parent = &exynos5_clk_aclk_66.clk, + .enable = exynos5_clk_ip_peric_ctrl, + .ctrlbit = (1 << 18), }, { .name = SYSMMU_CLOCK_NAME, .devname = SYSMMU_CLOCK_DEVNAME(mfc_l, 0), @@ -1034,6 +1057,69 @@ static struct clksrc_clk exynos5_clk_sclk_mmc3 = { .reg_div = { .reg = EXYNOS5_CLKDIV_FSYS2, .shift = 24, .size = 8 }, }; +static struct clksrc_clk exynos5_clk_mdout_spi0 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.0", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 16, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_mdout_spi1 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.1", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 20, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 16, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_mdout_spi2 = { + .clk = { + .name = "mdout_spi", + .devname = "exynos4210-spi.2", + }, + .sources = &exynos5_clkset_group, + .reg_src = { .reg = EXYNOS5_CLKSRC_PERIC1, .shift = 24, .size = 4 }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 0, .size = 4 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_spi0 = { + .clk = { + .name = "sclk_spi", + .devname = "exynos4210-spi.0", + .parent = &exynos5_clk_mdout_spi0.clk, + .enable = exynos5_clksrc_mask_peric1_ctrl, + .ctrlbit = (1 << 16), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 8, .size = 8 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_spi1 = { + .clk = { + .name = "sclk_spi", + .devname = "exynos4210-spi.1", + .parent = &exynos5_clk_mdout_spi1.clk, + .enable = exynos5_clksrc_mask_peric1_ctrl, + .ctrlbit = (1 << 20), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC1, .shift = 24, .size = 8 }, +}; + +static struct clksrc_clk exynos5_clk_sclk_spi2 = { + .clk = { + .name = "sclk_spi", + .devname = "exynos4210-spi.2", + .parent = &exynos5_clk_mdout_spi2.clk, + .enable = exynos5_clksrc_mask_peric1_ctrl, + .ctrlbit = (1 << 24), + }, + .reg_div = { .reg = EXYNOS5_CLKDIV_PERIC2, .shift = 8, .size = 8 }, +}; + static struct clksrc_clk exynos5_clksrcs[] = { { .clk = { @@ -1148,6 +1234,12 @@ static struct clksrc_clk *exynos5_sysclks[] = { &exynos5_clk_dout_mmc4, &exynos5_clk_aclk_acp, &exynos5_clk_pclk_acp, + &exynos5_clk_sclk_spi0, + &exynos5_clk_sclk_spi1, + &exynos5_clk_sclk_spi2, + &exynos5_clk_mdout_spi0, + &exynos5_clk_mdout_spi1, + &exynos5_clk_mdout_spi2, }; static struct clk *exynos5_clk_cdev[] = { @@ -1176,6 +1268,9 @@ static struct clk_lookup exynos5_clk_lookup[] = { CLKDEV_INIT("exynos4-sdhci.1", "mmc_busclk.2", &exynos5_clk_sclk_mmc1.clk), CLKDEV_INIT("exynos4-sdhci.2", "mmc_busclk.2", &exynos5_clk_sclk_mmc2.clk), CLKDEV_INIT("exynos4-sdhci.3", "mmc_busclk.2", &exynos5_clk_sclk_mmc3.clk), + CLKDEV_INIT("exynos4210-spi.0", "spi_busclk0", &exynos5_clk_sclk_spi0.clk), + CLKDEV_INIT("exynos4210-spi.1", "spi_busclk0", &exynos5_clk_sclk_spi1.clk), + CLKDEV_INIT("exynos4210-spi.2", "spi_busclk0", &exynos5_clk_sclk_spi2.clk), CLKDEV_INIT("dma-pl330.0", "apb_pclk", &exynos5_clk_pdma0), CLKDEV_INIT("dma-pl330.1", "apb_pclk", &exynos5_clk_pdma1), CLKDEV_INIT("dma-pl330.2", "apb_pclk", &exynos5_clk_mdma1), diff --git a/arch/arm/mach-exynos/common.c b/arch/arm/mach-exynos/common.c index 742edd3bbec34b14f9c6e1817029b9c81f602c03..4eb39cdf75eab7b524ab090af5179315797107ce 100644 --- a/arch/arm/mach-exynos/common.c +++ b/arch/arm/mach-exynos/common.c @@ -540,7 +540,8 @@ static struct irq_domain_ops combiner_irq_domain_ops = { .map = combiner_irq_domain_map, }; -void __init combiner_init(void __iomem *combiner_base, struct device_node *np) +static void __init combiner_init(void __iomem *combiner_base, + struct device_node *np) { int i, irq, irq_base; unsigned int max_nr, nr_irq; @@ -712,31 +713,6 @@ static int __init exynos4_l2x0_cache_init(void) early_initcall(exynos4_l2x0_cache_init); #endif -static int __init exynos5_l2_cache_init(void) -{ - unsigned int val; - - if (!soc_is_exynos5250()) - return 0; - - asm volatile("mrc p15, 0, %0, c1, c0, 0\n" - "bic %0, %0, #(1 << 2)\n" /* cache disable */ - "mcr p15, 0, %0, c1, c0, 0\n" - "mrc p15, 1, %0, c9, c0, 2\n" - : "=r"(val)); - - val |= (1 << 9) | (1 << 5) | (2 << 6) | (2 << 0); - - asm volatile("mcr p15, 1, %0, c9, c0, 2\n" : : "r"(val)); - asm volatile("mrc p15, 0, %0, c1, c0, 0\n" - "orr %0, %0, #(1 << 2)\n" /* cache enable */ - "mcr p15, 0, %0, c1, c0, 0\n" - : : "r"(val)); - - return 0; -} -early_initcall(exynos5_l2_cache_init); - static int __init exynos_init(void) { printk(KERN_INFO "EXYNOS: Initializing architecture\n"); diff --git a/arch/arm/mach-exynos/include/mach/irqs.h b/arch/arm/mach-exynos/include/mach/irqs.h index 7a4b4789eb7288205fcfcd555dcf50ffdb962753..35bced6f9092141920152664267362a54cdf8161 100644 --- a/arch/arm/mach-exynos/include/mach/irqs.h +++ b/arch/arm/mach-exynos/include/mach/irqs.h @@ -195,6 +195,10 @@ #define IRQ_IIC6 EXYNOS4_IRQ_IIC6 #define IRQ_IIC7 EXYNOS4_IRQ_IIC7 +#define IRQ_SPI0 EXYNOS4_IRQ_SPI0 +#define IRQ_SPI1 EXYNOS4_IRQ_SPI1 +#define IRQ_SPI2 EXYNOS4_IRQ_SPI2 + #define IRQ_USB_HOST EXYNOS4_IRQ_USB_HOST #define IRQ_OTG EXYNOS4_IRQ_USB_HSOTG diff --git a/arch/arm/mach-exynos/include/mach/map.h b/arch/arm/mach-exynos/include/mach/map.h index ca4aa89aa46b357fe5ff04710bd9ffdf4caf361b..c72b675b3e4b98f07dd26353d1dcbb3ee7ae12e6 100644 --- a/arch/arm/mach-exynos/include/mach/map.h +++ b/arch/arm/mach-exynos/include/mach/map.h @@ -154,6 +154,9 @@ #define EXYNOS4_PA_SPI0 0x13920000 #define EXYNOS4_PA_SPI1 0x13930000 #define EXYNOS4_PA_SPI2 0x13940000 +#define EXYNOS5_PA_SPI0 0x12D20000 +#define EXYNOS5_PA_SPI1 0x12D30000 +#define EXYNOS5_PA_SPI2 0x12D40000 #define EXYNOS4_PA_GPIO1 0x11400000 #define EXYNOS4_PA_GPIO2 0x11000000 diff --git a/arch/arm/mach-exynos/include/mach/regs-pmu.h b/arch/arm/mach-exynos/include/mach/regs-pmu.h index 43a99e6f56ab68e638621f8fb9e6b23c910005b3..d4e392b811a315d6a477f677b4462359ed9c8f6f 100644 --- a/arch/arm/mach-exynos/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos/include/mach/regs-pmu.h @@ -232,6 +232,11 @@ #define EXYNOS5_USB_CFG S5P_PMUREG(0x0230) +#define EXYNOS5_AUTO_WDTRESET_DISABLE S5P_PMUREG(0x0408) +#define EXYNOS5_MASK_WDTRESET_REQUEST S5P_PMUREG(0x040C) + +#define EXYNOS5_SYS_WDTRESET (1 << 20) + #define EXYNOS5_ARM_CORE0_SYS_PWR_REG S5P_PMUREG(0x1000) #define EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG S5P_PMUREG(0x1004) #define EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG S5P_PMUREG(0x1008) diff --git a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h index c337cf3a71bf35e39bf4780f481a36a1c54db9aa..07277735252e39b3437e8cdb2fddeaf44e1c3cd9 100644 --- a/arch/arm/mach-exynos/include/mach/regs-usb-phy.h +++ b/arch/arm/mach-exynos/include/mach/regs-usb-phy.h @@ -35,11 +35,21 @@ #define PHY1_COMMON_ON_N (1 << 7) #define PHY0_COMMON_ON_N (1 << 4) #define PHY0_ID_PULLUP (1 << 2) -#define CLKSEL_MASK (0x3 << 0) -#define CLKSEL_SHIFT (0) -#define CLKSEL_48M (0x0 << 0) -#define CLKSEL_12M (0x2 << 0) -#define CLKSEL_24M (0x3 << 0) + +#define EXYNOS4_CLKSEL_SHIFT (0) + +#define EXYNOS4210_CLKSEL_MASK (0x3 << 0) +#define EXYNOS4210_CLKSEL_48M (0x0 << 0) +#define EXYNOS4210_CLKSEL_12M (0x2 << 0) +#define EXYNOS4210_CLKSEL_24M (0x3 << 0) + +#define EXYNOS4X12_CLKSEL_MASK (0x7 << 0) +#define EXYNOS4X12_CLKSEL_9600K (0x0 << 0) +#define EXYNOS4X12_CLKSEL_10M (0x1 << 0) +#define EXYNOS4X12_CLKSEL_12M (0x2 << 0) +#define EXYNOS4X12_CLKSEL_19200K (0x3 << 0) +#define EXYNOS4X12_CLKSEL_20M (0x4 << 0) +#define EXYNOS4X12_CLKSEL_24M (0x5 << 0) #define EXYNOS4_RSTCON EXYNOS4_HSOTG_PHYREG(0x08) #define HOST_LINK_PORT_SWRST_MASK (0xf << 6) diff --git a/arch/arm/mach-exynos/include/mach/spi-clocks.h b/arch/arm/mach-exynos/include/mach/spi-clocks.h deleted file mode 100644 index c71a5fba6a84c4f6a0a6cf4b538241519389dac3..0000000000000000000000000000000000000000 --- a/arch/arm/mach-exynos/include/mach/spi-clocks.h +++ /dev/null @@ -1,16 +0,0 @@ -/* linux/arch/arm/mach-exynos4/include/mach/spi-clocks.h - * - * Copyright (C) 2011 Samsung Electronics Co. Ltd. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __ASM_ARCH_SPI_CLKS_H -#define __ASM_ARCH_SPI_CLKS_H __FILE__ - -/* Must source from SCLK_SPI */ -#define EXYNOS_SPI_SRCCLK_SCLK 0 - -#endif /* __ASM_ARCH_SPI_CLKS_H */ diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c index e7e9743543acd6384f38f5cfcfcd7b4760872225..b2b5d5faa74854adea983f3b2b1b085b6d133540 100644 --- a/arch/arm/mach-exynos/mach-exynos4-dt.c +++ b/arch/arm/mach-exynos/mach-exynos4-dt.c @@ -55,6 +55,12 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = { "exynos4-sdhci.3", NULL), OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS4_PA_IIC(0), "s3c2440-i2c.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI0, + "exynos4210-spi.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI1, + "exynos4210-spi.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS4_PA_SPI2, + "exynos4210-spi.2", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS4_PA_PDMA1, "dma-pl330.1", NULL), {}, diff --git a/arch/arm/mach-exynos/mach-exynos5-dt.c b/arch/arm/mach-exynos/mach-exynos5-dt.c index 7b1e11a228cce49776135f140316c83182f4d440..ef770bc2318fcbd074387a6c5278a007f169773d 100644 --- a/arch/arm/mach-exynos/mach-exynos5-dt.c +++ b/arch/arm/mach-exynos/mach-exynos5-dt.c @@ -47,6 +47,12 @@ static const struct of_dev_auxdata exynos5250_auxdata_lookup[] __initconst = { "s3c2440-i2c.0", NULL), OF_DEV_AUXDATA("samsung,s3c2440-i2c", EXYNOS5_PA_IIC(1), "s3c2440-i2c.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI0, + "exynos4210-spi.0", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI1, + "exynos4210-spi.1", NULL), + OF_DEV_AUXDATA("samsung,exynos4210-spi", EXYNOS5_PA_SPI2, + "exynos4210-spi.2", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA0, "dma-pl330.0", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_PDMA1, "dma-pl330.1", NULL), OF_DEV_AUXDATA("arm,pl330", EXYNOS5_PA_MDMA1, "dma-pl330.2", NULL), diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 656f8fc9addd3b67ecaafbe9207f279da01b3b70..f98a83a81ce73ed0cd89f364bfa87956802e7be8 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -50,7 +50,6 @@ #include #include #include -#include #include #include #include @@ -1342,9 +1341,8 @@ static struct platform_device *nuri_devices[] __initdata = { static void __init nuri_map_io(void) { - clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); + s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(nuri_uartcfgs, ARRAY_SIZE(nuri_uartcfgs)); } diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c index f5572be9d7bf38480f931618d27507738aaf1ad6..5a12dc26f496a7e2ef3552f1728d66ea11f09ef8 100644 --- a/arch/arm/mach-exynos/mach-origen.c +++ b/arch/arm/mach-exynos/mach-origen.c @@ -9,6 +9,7 @@ */ #include +#include #include #include #include @@ -21,6 +22,7 @@ #include #include #include +#include #include #include @@ -38,7 +40,6 @@ #include #include #include -#include #include #include @@ -499,6 +500,37 @@ static void __init origen_ohci_init(void) exynos4_ohci_set_platdata(pdata); } +/* USB OTG */ +static struct s3c_hsotg_plat origen_hsotg_pdata; + +static struct gpio_led origen_gpio_leds[] = { + { + .name = "origen::status1", + .default_trigger = "heartbeat", + .gpio = EXYNOS4_GPX1(3), + .active_low = 1, + }, + { + .name = "origen::status2", + .default_trigger = "mmc0", + .gpio = EXYNOS4_GPX1(4), + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data origen_gpio_led_info = { + .leds = origen_gpio_leds, + .num_leds = ARRAY_SIZE(origen_gpio_leds), +}; + +static struct platform_device origen_leds_gpio = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &origen_gpio_led_info, + }, +}; + static struct gpio_keys_button origen_gpio_keys_table[] = { { .code = KEY_MENU, @@ -655,6 +687,7 @@ static struct platform_device *origen_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_i2c0, &s3c_device_rtc, + &s3c_device_usb_hsotg, &s3c_device_wdt, &s5p_device_ehci, &s5p_device_fimc0, @@ -677,6 +710,7 @@ static struct platform_device *origen_devices[] __initdata = { &exynos4_device_ohci, &origen_device_gpiokeys, &origen_lcd_hv070wsa, + &origen_leds_gpio, &origen_device_bluetooth, }; @@ -712,7 +746,7 @@ static void s5p_tv_setup(void) static void __init origen_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); + s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs)); } @@ -744,7 +778,7 @@ static void __init origen_machine_init(void) origen_ehci_init(); origen_ohci_init(); - clk_xusbxti.rate = 24000000; + s3c_hsotg_set_platdata(&origen_hsotg_pdata); s5p_tv_setup(); s5p_i2c_hdmiphy_set_platdata(NULL); diff --git a/arch/arm/mach-exynos/mach-smdk4x12.c b/arch/arm/mach-exynos/mach-smdk4x12.c index fb09c70e195af8a61e3399fb0db0926222905a66..b26beb13ebef40ff03bb524a6a8a9e8733e7efe9 100644 --- a/arch/arm/mach-exynos/mach-smdk4x12.c +++ b/arch/arm/mach-exynos/mach-smdk4x12.c @@ -13,12 +13,14 @@ #include #include #include +#include #include #include #include #include #include #include +#include #include #include @@ -28,15 +30,18 @@ #include #include #include +#include #include #include #include #include +#include #include #include #include +#include #include "common.h" /* Following are default values for UCON, ULCON and UFCON UART registers */ @@ -219,8 +224,10 @@ static struct platform_pwm_backlight_data smdk4x12_bl_data = { static uint32_t smdk4x12_keymap[] __initdata = { /* KEY(row, col, keycode) */ - KEY(1, 0, KEY_D), KEY(1, 1, KEY_A), KEY(1, 2, KEY_B), - KEY(1, 3, KEY_E), KEY(1, 4, KEY_C) + KEY(1, 3, KEY_1), KEY(1, 4, KEY_2), KEY(1, 5, KEY_3), + KEY(1, 6, KEY_4), KEY(1, 7, KEY_5), + KEY(2, 5, KEY_D), KEY(2, 6, KEY_A), KEY(2, 7, KEY_B), + KEY(0, 7, KEY_E), KEY(0, 5, KEY_C) }; static struct matrix_keymap_data smdk4x12_keymap_data __initdata = { @@ -230,10 +237,62 @@ static struct matrix_keymap_data smdk4x12_keymap_data __initdata = { static struct samsung_keypad_platdata smdk4x12_keypad_data __initdata = { .keymap_data = &smdk4x12_keymap_data, - .rows = 2, - .cols = 5, + .rows = 3, + .cols = 8, }; +#ifdef CONFIG_DRM_EXYNOS +static struct exynos_drm_fimd_pdata drm_fimd_pdata = { + .panel = { + .timing = { + .left_margin = 8, + .right_margin = 8, + .upper_margin = 6, + .lower_margin = 6, + .hsync_len = 6, + .vsync_len = 4, + .xres = 480, + .yres = 800, + }, + }, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .default_win = 0, + .bpp = 32, +}; +#else +static struct s3c_fb_pd_win smdk4x12_fb_win0 = { + .xres = 480, + .yres = 800, + .virtual_x = 480, + .virtual_y = 800 * 2, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct fb_videomode smdk4x12_lcd_timing = { + .left_margin = 8, + .right_margin = 8, + .upper_margin = 6, + .lower_margin = 6, + .hsync_len = 6, + .vsync_len = 4, + .xres = 480, + .yres = 800, +}; + +static struct s3c_fb_platdata smdk4x12_lcd_pdata __initdata = { + .win[0] = &smdk4x12_fb_win0, + .vtiming = &smdk4x12_lcd_timing, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; +#endif + +/* USB OTG */ +static struct s3c_hsotg_plat smdk4x12_hsotg_pdata; + static struct platform_device *smdk4x12_devices[] __initdata = { &s3c_device_hsmmc2, &s3c_device_hsmmc3, @@ -242,22 +301,25 @@ static struct platform_device *smdk4x12_devices[] __initdata = { &s3c_device_i2c3, &s3c_device_i2c7, &s3c_device_rtc, + &s3c_device_usb_hsotg, &s3c_device_wdt, &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, &s5p_device_fimc3, &s5p_device_fimc_md, + &s5p_device_fimd0, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, +#ifdef CONFIG_DRM_EXYNOS + &exynos_device_drm, +#endif &samsung_device_keypad, }; static void __init smdk4x12_map_io(void) { - clk_xusbxti.rate = 24000000; - exynos_init_io(NULL, 0); s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(smdk4x12_uartcfgs, ARRAY_SIZE(smdk4x12_uartcfgs)); @@ -293,6 +355,15 @@ static void __init smdk4x12_machine_init(void) s3c_sdhci2_set_platdata(&smdk4x12_hsmmc2_pdata); s3c_sdhci3_set_platdata(&smdk4x12_hsmmc3_pdata); + s3c_hsotg_set_platdata(&smdk4x12_hsotg_pdata); + +#ifdef CONFIG_DRM_EXYNOS + s5p_device_fimd0.dev.platform_data = &drm_fimd_pdata; + exynos4_fimd0_gpio_setup_24bpp(); +#else + s5p_fimd0_set_platdata(&smdk4x12_lcd_pdata); +#endif + platform_add_devices(smdk4x12_devices, ARRAY_SIZE(smdk4x12_devices)); } diff --git a/arch/arm/mach-exynos/mach-smdkv310.c b/arch/arm/mach-exynos/mach-smdkv310.c index 262e9e446a96a62934f58b978c81dcdd98e1c1a3..3cfa688d274a8bda5b5657924509d9d0726f41f6 100644 --- a/arch/arm/mach-exynos/mach-smdkv310.c +++ b/arch/arm/mach-exynos/mach-smdkv310.c @@ -19,6 +19,7 @@ #include #include #include +#include #include #include @@ -34,7 +35,6 @@ #include #include #include -#include #include #include #include @@ -271,6 +271,15 @@ static void __init smdkv310_ohci_init(void) exynos4_ohci_set_platdata(pdata); } +/* USB OTG */ +static struct s3c_hsotg_plat smdkv310_hsotg_pdata; + +/* Audio device */ +static struct platform_device smdkv310_device_audio = { + .name = "smdk-audio", + .id = -1, +}; + static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, @@ -279,6 +288,7 @@ static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_i2c1, &s5p_device_i2c_hdmiphy, &s3c_device_rtc, + &s3c_device_usb_hsotg, &s3c_device_wdt, &s5p_device_ehci, &s5p_device_fimc0, @@ -302,6 +312,7 @@ static struct platform_device *smdkv310_devices[] __initdata = { &samsung_asoc_dma, &samsung_asoc_idma, &s5p_device_fimd0, + &smdkv310_device_audio, &smdkv310_lcd_lte480wv, &smdkv310_smsc911x, &exynos4_device_ahci, @@ -354,7 +365,7 @@ static void s5p_tv_setup(void) static void __init smdkv310_map_io(void) { exynos_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); + s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); } @@ -390,7 +401,7 @@ static void __init smdkv310_machine_init(void) smdkv310_ehci_init(); smdkv310_ohci_init(); - clk_xusbxti.rate = 24000000; + s3c_hsotg_set_platdata(&smdkv310_hsotg_pdata); platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); } @@ -417,5 +428,6 @@ MACHINE_START(SMDKC210, "SMDKC210") .init_machine = smdkv310_machine_init, .init_late = exynos_init_late, .timer = &exynos4_timer, + .reserve = &smdkv310_reserve, .restart = exynos4_restart, MACHINE_END diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c index cd92fa86ba41248da1d8de5e8f122edca102d290..4d1f40d44ed19686f129113e5903a9f137e139e6 100644 --- a/arch/arm/mach-exynos/mach-universal_c210.c +++ b/arch/arm/mach-exynos/mach-universal_c210.c @@ -39,7 +39,6 @@ #include #include #include -#include #include #include #include @@ -1100,9 +1099,8 @@ static struct platform_device *universal_devices[] __initdata = { static void __init universal_map_io(void) { - clk_xusbxti.rate = 24000000; exynos_init_io(NULL, 0); - s3c24xx_init_clocks(24000000); + s3c24xx_init_clocks(clk_xusbxti.rate); s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); s5p_set_timer_source(S5P_PWM2, S5P_PWM4); } diff --git a/arch/arm/mach-exynos/pm_domains.c b/arch/arm/mach-exynos/pm_domains.c index e9fafcf163de8982287876a7ca6d6cf94488f472..373c3c00d24cdbbe054a1aae60625d97188e6208 100644 --- a/arch/arm/mach-exynos/pm_domains.c +++ b/arch/arm/mach-exynos/pm_domains.c @@ -119,7 +119,9 @@ static __init void exynos_pm_add_dev_to_genpd(struct platform_device *pdev, struct exynos_pm_domain *pd) { if (pdev->dev.bus) { - if (pm_genpd_add_device(&pd->pd, &pdev->dev)) + if (!pm_genpd_add_device(&pd->pd, &pdev->dev)) + pm_genpd_dev_need_restore(&pdev->dev, true); + else pr_info("%s: error in adding %s device to %s power" "domain\n", __func__, dev_name(&pdev->dev), pd->name); @@ -151,9 +153,12 @@ static __init int exynos4_pm_init_power_domain(void) if (of_have_populated_dt()) return exynos_pm_dt_parse_domains(); - for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) - pm_genpd_init(&exynos4_pm_domains[idx]->pd, NULL, - exynos4_pm_domains[idx]->is_off); + for (idx = 0; idx < ARRAY_SIZE(exynos4_pm_domains); idx++) { + struct exynos_pm_domain *pd = exynos4_pm_domains[idx]; + int on = __raw_readl(pd->base + 0x4) & S5P_INT_LOCAL_PWR_EN; + + pm_genpd_init(&pd->pd, NULL, !on); + } #ifdef CONFIG_S5P_DEV_FIMD0 exynos_pm_add_dev_to_genpd(&s5p_device_fimd0, &exynos4_pd_lcd0); diff --git a/arch/arm/mach-exynos/pmu.c b/arch/arm/mach-exynos/pmu.c index 4aacb66f71618da5d865a04a868878ef380aebea..3a48c852be6c1a1e97117b96512d6e4e1ca452c5 100644 --- a/arch/arm/mach-exynos/pmu.c +++ b/arch/arm/mach-exynos/pmu.c @@ -315,7 +315,7 @@ static struct exynos_pmu_conf exynos5250_pmu_config[] = { { PMU_TABLE_END,}, }; -void __iomem *exynos5_list_both_cnt_feed[] = { +static void __iomem *exynos5_list_both_cnt_feed[] = { EXYNOS5_ARM_CORE0_OPTION, EXYNOS5_ARM_CORE1_OPTION, EXYNOS5_ARM_COMMON_OPTION, @@ -329,7 +329,7 @@ void __iomem *exynos5_list_both_cnt_feed[] = { EXYNOS5_TOP_PWR_SYSMEM_OPTION, }; -void __iomem *exynos5_list_diable_wfi_wfe[] = { +static void __iomem *exynos5_list_diable_wfi_wfe[] = { EXYNOS5_ARM_CORE1_OPTION, EXYNOS5_FSYS_ARM_OPTION, EXYNOS5_ISP_ARM_OPTION, @@ -390,6 +390,8 @@ void exynos_sys_powerdown_conf(enum sys_powerdown mode) static int __init exynos_pmu_init(void) { + unsigned int value; + exynos_pmu_config = exynos4210_pmu_config; if (soc_is_exynos4210()) { @@ -399,6 +401,18 @@ static int __init exynos_pmu_init(void) exynos_pmu_config = exynos4x12_pmu_config; pr_info("EXYNOS4x12 PMU Initialize\n"); } else if (soc_is_exynos5250()) { + /* + * When SYS_WDTRESET is set, watchdog timer reset request + * is ignored by power management unit. + */ + value = __raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE); + value &= ~EXYNOS5_SYS_WDTRESET; + __raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE); + + value = __raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST); + value &= ~EXYNOS5_SYS_WDTRESET; + __raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST); + exynos_pmu_config = exynos5250_pmu_config; pr_info("EXYNOS5250 PMU Initialize\n"); } else { diff --git a/arch/arm/mach-exynos/setup-spi.c b/arch/arm/mach-exynos/setup-spi.c index 833ff40ee0e8943cd5f711c884f2307df4a52f2d..4999829d1c6eb176f028a4f5959a9af90ac3d66e 100644 --- a/arch/arm/mach-exynos/setup-spi.c +++ b/arch/arm/mach-exynos/setup-spi.c @@ -9,21 +9,10 @@ */ #include -#include - #include -#include #ifdef CONFIG_S3C64XX_DEV_SPI0 -struct s3c64xx_spi_info s3c64xx_spi0_pdata __initdata = { - .fifo_lvl_mask = 0x1ff, - .rx_lvl_offset = 15, - .high_speed = 1, - .clk_from_cmu = true, - .tx_st_done = 25, -}; - -int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi0_cfg_gpio(void) { s3c_gpio_cfgpin(EXYNOS4_GPB(0), S3C_GPIO_SFN(2)); s3c_gpio_setpull(EXYNOS4_GPB(0), S3C_GPIO_PULL_UP); @@ -34,15 +23,7 @@ int s3c64xx_spi0_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI1 -struct s3c64xx_spi_info s3c64xx_spi1_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, - .high_speed = 1, - .clk_from_cmu = true, - .tx_st_done = 25, -}; - -int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi1_cfg_gpio(void) { s3c_gpio_cfgpin(EXYNOS4_GPB(4), S3C_GPIO_SFN(2)); s3c_gpio_setpull(EXYNOS4_GPB(4), S3C_GPIO_PULL_UP); @@ -53,15 +34,7 @@ int s3c64xx_spi1_cfg_gpio(struct platform_device *dev) #endif #ifdef CONFIG_S3C64XX_DEV_SPI2 -struct s3c64xx_spi_info s3c64xx_spi2_pdata __initdata = { - .fifo_lvl_mask = 0x7f, - .rx_lvl_offset = 15, - .high_speed = 1, - .clk_from_cmu = true, - .tx_st_done = 25, -}; - -int s3c64xx_spi2_cfg_gpio(struct platform_device *dev) +int s3c64xx_spi2_cfg_gpio(void) { s3c_gpio_cfgpin(EXYNOS4_GPC1(1), S3C_GPIO_SFN(5)); s3c_gpio_setpull(EXYNOS4_GPC1(1), S3C_GPIO_PULL_UP); diff --git a/arch/arm/mach-exynos/setup-usb-phy.c b/arch/arm/mach-exynos/setup-usb-phy.c index 1af0a7f44e002af1c82fec2aee0d2b2cdecba595..b81cc569a8ddab4e7a247752297b1b4fac732542 100644 --- a/arch/arm/mach-exynos/setup-usb-phy.c +++ b/arch/arm/mach-exynos/setup-usb-phy.c @@ -31,27 +31,55 @@ static void exynos4210_usb_phy_clkset(struct platform_device *pdev) struct clk *xusbxti_clk; u32 phyclk; - /* set clock frequency for PLL */ - phyclk = readl(EXYNOS4_PHYCLK) & ~CLKSEL_MASK; - xusbxti_clk = clk_get(&pdev->dev, "xusbxti"); if (xusbxti_clk && !IS_ERR(xusbxti_clk)) { - switch (clk_get_rate(xusbxti_clk)) { - case 12 * MHZ: - phyclk |= CLKSEL_12M; - break; - case 24 * MHZ: - phyclk |= CLKSEL_24M; - break; - default: - case 48 * MHZ: - /* default reference clock */ - break; + if (soc_is_exynos4210()) { + /* set clock frequency for PLL */ + phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4210_CLKSEL_MASK; + + switch (clk_get_rate(xusbxti_clk)) { + case 12 * MHZ: + phyclk |= EXYNOS4210_CLKSEL_12M; + break; + case 48 * MHZ: + phyclk |= EXYNOS4210_CLKSEL_48M; + break; + default: + case 24 * MHZ: + phyclk |= EXYNOS4210_CLKSEL_24M; + break; + } + writel(phyclk, EXYNOS4_PHYCLK); + } else if (soc_is_exynos4212() || soc_is_exynos4412()) { + /* set clock frequency for PLL */ + phyclk = readl(EXYNOS4_PHYCLK) & ~EXYNOS4X12_CLKSEL_MASK; + + switch (clk_get_rate(xusbxti_clk)) { + case 9600 * KHZ: + phyclk |= EXYNOS4X12_CLKSEL_9600K; + break; + case 10 * MHZ: + phyclk |= EXYNOS4X12_CLKSEL_10M; + break; + case 12 * MHZ: + phyclk |= EXYNOS4X12_CLKSEL_12M; + break; + case 19200 * KHZ: + phyclk |= EXYNOS4X12_CLKSEL_19200K; + break; + case 20 * MHZ: + phyclk |= EXYNOS4X12_CLKSEL_20M; + break; + default: + case 24 * MHZ: + /* default reference clock */ + phyclk |= EXYNOS4X12_CLKSEL_24M; + break; + } + writel(phyclk, EXYNOS4_PHYCLK); } clk_put(xusbxti_clk); } - - writel(phyclk, EXYNOS4_PHYCLK); } static int exynos4210_usb_phy0_init(struct platform_device *pdev) diff --git a/arch/arm/mach-highbank/Makefile b/arch/arm/mach-highbank/Makefile index ded4652ada803221ea97a92bb50dc6d8d6fef64e..3ec8bdd25d093f5143ad9a52a3e35aef272ed890 100644 --- a/arch/arm/mach-highbank/Makefile +++ b/arch/arm/mach-highbank/Makefile @@ -1,4 +1,4 @@ -obj-y := clock.o highbank.o system.o smc.o +obj-y := highbank.o system.o smc.o plus_sec := $(call as-instr,.arch_extension sec,+sec) AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec) diff --git a/arch/arm/mach-highbank/clock.c b/arch/arm/mach-highbank/clock.c deleted file mode 100644 index c25a2ae4fde150cc683f4221afb0466c237bf43e..0000000000000000000000000000000000000000 --- a/arch/arm/mach-highbank/clock.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright 2011 Calxeda, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program. If not, see . - */ -#include -#include -#include -#include -#include - -struct clk { - unsigned long rate; -}; - -int clk_enable(struct clk *clk) -{ - return 0; -} - -void clk_disable(struct clk *clk) -{} - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - return clk->rate; -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - return 0; -} - -static struct clk eclk = { .rate = 200000000 }; -static struct clk pclk = { .rate = 150000000 }; - -static struct clk_lookup lookups[] = { - { .clk = &pclk, .con_id = "apb_pclk", }, - { .clk = &pclk, .dev_id = "sp804", }, - { .clk = &eclk, .dev_id = "ffe0e000.sdhci", }, - { .clk = &pclk, .dev_id = "fff36000.serial", }, -}; - -void __init highbank_clocks_init(void) -{ - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); -} diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c index 8777612b1a42b2dd6fd1a49df59ff6a93153b9d6..d75b0a78d88ab94a85512cc3de2116ea3a710743 100644 --- a/arch/arm/mach-highbank/highbank.c +++ b/arch/arm/mach-highbank/highbank.c @@ -105,6 +105,11 @@ static void __init highbank_init_irq(void) #endif } +static struct clk_lookup lookup = { + .dev_id = "sp804", + .con_id = NULL, +}; + static void __init highbank_timer_init(void) { int irq; @@ -122,6 +127,8 @@ static void __init highbank_timer_init(void) irq = irq_of_parse_and_map(np, 0); highbank_clocks_init(); + lookup.clk = of_clk_get(np, 0); + clkdev_add(&lookup); sp804_clocksource_and_sched_clock_init(timer_base + 0x20, "timer1"); sp804_clockevents_init(timer_base, irq, "timer0"); diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index eff4db5de0ddb8abbfde826cc14c16b9432c5373..afd542ad6f97d97cca788c4604a10e69d4625540 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -52,6 +52,7 @@ config SOC_IMX25 select ARCH_MX25 select COMMON_CLK select CPU_ARM926T + select HAVE_CAN_FLEXCAN if CAN select ARCH_MXC_IOMUX_V3 select MXC_AVIC @@ -73,12 +74,13 @@ config SOC_IMX31 config SOC_IMX35 bool - select CPU_V6 + select CPU_V6K select ARCH_MXC_IOMUX_V3 select COMMON_CLK select HAVE_EPIT select MXC_AVIC select SMP_ON_UP if SMP + select HAVE_CAN_FLEXCAN if CAN config SOC_IMX5 select CPU_V7 @@ -105,6 +107,7 @@ config SOC_IMX53 select SOC_IMX5 select ARCH_MX5 select ARCH_MX53 + select HAVE_CAN_FLEXCAN if CAN if ARCH_IMX_V4_V5 @@ -158,7 +161,6 @@ config MACH_MX25_3DS select IMX_HAVE_PLATFORM_IMX2_WDT select IMX_HAVE_PLATFORM_IMXDI_RTC select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_SSI select IMX_HAVE_PLATFORM_IMX_FB select IMX_HAVE_PLATFORM_IMX_KEYPAD select IMX_HAVE_PLATFORM_IMX_UART @@ -380,7 +382,6 @@ config MACH_IMX27IPCAM config MACH_IMX27_DT bool "Support i.MX27 platforms from device tree" select SOC_IMX27 - select USE_OF help Include support for Freescale i.MX27 based platforms using the device tree for discovery @@ -557,6 +558,14 @@ config MACH_BUG Include support for BUGBase 1.3 platform. This includes specific configurations for the board and its peripherals. +config MACH_IMX31_DT + bool "Support i.MX31 platforms from device tree" + select SOC_IMX31 + select USE_OF + help + Include support for Freescale i.MX31 based platforms + using the device tree for discovery. + comment "MX35 platforms:" config MACH_PCM043 @@ -589,6 +598,7 @@ config MACH_MX35_3DS select IMX_HAVE_PLATFORM_IPU_CORE select IMX_HAVE_PLATFORM_MXC_EHCI select IMX_HAVE_PLATFORM_MXC_NAND + select IMX_HAVE_PLATFORM_MXC_RTC select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX help Include support for MX35PDK platform. This includes specific @@ -663,7 +673,6 @@ comment "i.MX51 machines:" config MACH_IMX51_DT bool "Support i.MX51 platforms from device tree" select SOC_IMX51 - select USE_OF select MACH_MX51_BABBAGE help Include support for Freescale i.MX51 based platforms @@ -759,7 +768,6 @@ comment "i.MX53 machines:" config MACH_IMX53_DT bool "Support i.MX53 platforms from device tree" select SOC_IMX53 - select USE_OF select MACH_MX53_ARD select MACH_MX53_EVK select MACH_MX53_LOCO @@ -826,13 +834,14 @@ config SOC_IMX6Q select COMMON_CLK select CPU_V7 select HAVE_ARM_SCU + select HAVE_CAN_FLEXCAN if CAN select HAVE_IMX_GPC select HAVE_IMX_MMDC select HAVE_IMX_SRC select HAVE_SMP + select MFD_ANATOP select PINCTRL select PINCTRL_IMX6Q - select USE_OF help This enables support for Freescale i.MX6 Quad processor. diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index ff29421414f24262e5e4b66c74270f58fa401798..07f7c226e4cfe6eec6181e5e506655223c2f1e1a 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_MACH_QONG) += mach-qong.o obj-$(CONFIG_MACH_ARMADILLO5X0) += mach-armadillo5x0.o obj-$(CONFIG_MACH_KZM_ARM11_01) += mach-kzm_arm11_01.o obj-$(CONFIG_MACH_BUG) += mach-bug.o +obj-$(CONFIG_MACH_IMX31_DT) += imx31-dt.o # i.MX35 based machines obj-$(CONFIG_MACH_PCM043) += mach-pcm043.o diff --git a/arch/arm/mach-imx/clk-imx27.c b/arch/arm/mach-imx/clk-imx27.c index 295cbd7c08dcd9df383b8fd7eb5a1843083e895a..7aa6313fb1671bbf975d6cf6407aad3ecee66498 100644 --- a/arch/arm/mach-imx/clk-imx27.c +++ b/arch/arm/mach-imx/clk-imx27.c @@ -256,7 +256,7 @@ int __init mx27_clocks_init(unsigned long fref) clk_register_clkdev(clk[gpio_ipg_gate], "gpio", NULL); clk_register_clkdev(clk[brom_ahb_gate], "brom", NULL); clk_register_clkdev(clk[ata_ahb_gate], "ata", NULL); - clk_register_clkdev(clk[rtc_ipg_gate], "rtc", NULL); + clk_register_clkdev(clk[rtc_ipg_gate], NULL, "mxc_rtc"); clk_register_clkdev(clk[scc_ipg_gate], "scc", NULL); clk_register_clkdev(clk[cpu_div], "cpu", NULL); clk_register_clkdev(clk[emi_ahb_gate], "emi_ahb" , NULL); @@ -267,6 +267,8 @@ int __init mx27_clocks_init(unsigned long fref) clk_prepare_enable(clk[emi_ahb_gate]); + imx_print_silicon_rev("i.MX27", mx27_revision()); + return 0; } diff --git a/arch/arm/mach-imx/clk-imx31.c b/arch/arm/mach-imx/clk-imx31.c index c9a06d800f8ef7a0a7d96e015cd87754afd09a25..8e19e70f90f97f121b6379945ebeadc2ae2284ab 100644 --- a/arch/arm/mach-imx/clk-imx31.c +++ b/arch/arm/mach-imx/clk-imx31.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include @@ -123,7 +124,7 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[cspi3_gate], NULL, "imx31-cspi.2"); clk_register_clkdev(clk[pwm_gate], "pwm", NULL); clk_register_clkdev(clk[wdog_gate], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[rtc_gate], "rtc", NULL); + clk_register_clkdev(clk[rtc_gate], NULL, "mxc_rtc"); clk_register_clkdev(clk[epit1_gate], "epit", NULL); clk_register_clkdev(clk[epit2_gate], "epit", NULL); clk_register_clkdev(clk[nfc], NULL, "mxc_nand.0"); @@ -165,7 +166,7 @@ int __init mx31_clocks_init(unsigned long fref) clk_register_clkdev(clk[firi_gate], "firi", NULL); clk_register_clkdev(clk[ata_gate], NULL, "pata_imx"); clk_register_clkdev(clk[rtic_gate], "rtic", NULL); - clk_register_clkdev(clk[rng_gate], "rng", NULL); + clk_register_clkdev(clk[rng_gate], NULL, "mxc_rnga"); clk_register_clkdev(clk[sdma_gate], NULL, "imx31-sdma"); clk_register_clkdev(clk[iim_gate], "iim", NULL); @@ -179,3 +180,21 @@ int __init mx31_clocks_init(unsigned long fref) return 0; } + +#ifdef CONFIG_OF +int __init mx31_clocks_init_dt(void) +{ + struct device_node *np; + u32 fref = 26000000; /* default */ + + for_each_compatible_node(np, NULL, "fixed-clock") { + if (!of_device_is_compatible(np, "fsl,imx-osc26m")) + continue; + + if (!of_property_read_u32(np, "clock-frequency", &fref)) + break; + } + + return mx31_clocks_init(fref); +} +#endif diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index 920a8cc4272609829f941432cf9c10b26b979aba..c6422fb10bae37756693f3323f79df62e4fc932e 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -201,7 +201,6 @@ int __init mx35_clocks_init() pr_err("i.MX35 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[pata_gate], NULL, "pata_imx"); clk_register_clkdev(clk[can1_gate], NULL, "flexcan.0"); clk_register_clkdev(clk[can2_gate], NULL, "flexcan.1"); @@ -264,6 +263,14 @@ int __init mx35_clocks_init() clk_prepare_enable(clk[iim_gate]); clk_prepare_enable(clk[emi_gate]); + /* + * SCC is needed to boot via mmc after a watchdog reset. The clock code + * before conversion to common clk also enabled UART1 (which isn't + * handled here and not needed for mmc) and IIM (which is enabled + * unconditionally above). + */ + clk_prepare_enable(clk[scc_gate]); + imx_print_silicon_rev("i.MX35", mx35_revision()); #ifdef CONFIG_MXC_USE_EPIT diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index a2200c77bf70dcdc09c44d642fe09656f36f0fcb..f6086693ebd2aa665e29fc7a5d5623caeb0d3d53 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -58,7 +58,7 @@ enum imx5_clks { tve_s, uart1_ipg_gate, uart1_per_gate, uart2_ipg_gate, uart2_per_gate, uart3_ipg_gate, uart3_per_gate, i2c1_gate, i2c2_gate, gpt_ipg_gate, pwm1_ipg_gate, pwm1_hf_gate, pwm2_ipg_gate, pwm2_hf_gate, - gpt_gate, fec_gate, usboh3_per_gate, esdhc1_ipg_gate, esdhc2_ipg_gate, + gpt_hf_gate, fec_gate, usboh3_per_gate, esdhc1_ipg_gate, esdhc2_ipg_gate, esdhc3_ipg_gate, esdhc4_ipg_gate, ssi1_ipg_gate, ssi2_ipg_gate, ssi3_ipg_gate, ecspi1_ipg_gate, ecspi1_per_gate, ecspi2_ipg_gate, ecspi2_per_gate, cspi_ipg_gate, sdma_gate, emi_slow_gate, ipu_s, @@ -81,6 +81,7 @@ enum imx5_clks { ssi1_root_podf, ssi2_root_pred, ssi2_root_podf, ssi_ext1_pred, ssi_ext1_podf, ssi_ext2_pred, ssi_ext2_podf, ssi1_root_gate, ssi2_root_gate, ssi3_root_gate, ssi_ext1_gate, ssi_ext2_gate, + epit1_ipg_gate, epit1_hf_gate, epit2_ipg_gate, epit2_hf_gate, clk_max }; @@ -167,12 +168,12 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[uart3_per_gate] = imx_clk_gate2("uart3_per_gate", "uart_root", MXC_CCM_CCGR1, 16); clk[i2c1_gate] = imx_clk_gate2("i2c1_gate", "per_root", MXC_CCM_CCGR1, 18); clk[i2c2_gate] = imx_clk_gate2("i2c2_gate", "per_root", MXC_CCM_CCGR1, 20); - clk[gpt_ipg_gate] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 20); clk[pwm1_ipg_gate] = imx_clk_gate2("pwm1_ipg_gate", "ipg", MXC_CCM_CCGR2, 10); - clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12); + clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "per_root", MXC_CCM_CCGR2, 12); clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14); - clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16); - clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18); + clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "per_root", MXC_CCM_CCGR2, 16); + clk[gpt_ipg_gate] = imx_clk_gate2("gpt_ipg_gate", "ipg", MXC_CCM_CCGR2, 18); + clk[gpt_hf_gate] = imx_clk_gate2("gpt_hf_gate", "per_root", MXC_CCM_CCGR2, 20); clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24); clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26); clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28); @@ -226,13 +227,17 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk[ssi3_root_gate] = imx_clk_gate2("ssi3_root_gate", "ssi3_root_sel", MXC_CCM_CCGR3, 26); clk[ssi_ext1_gate] = imx_clk_gate2("ssi_ext1_gate", "ssi_ext1_com_sel", MXC_CCM_CCGR3, 28); clk[ssi_ext2_gate] = imx_clk_gate2("ssi_ext2_gate", "ssi_ext2_com_sel", MXC_CCM_CCGR3, 30); + clk[epit1_ipg_gate] = imx_clk_gate2("epit1_ipg_gate", "ipg", MXC_CCM_CCGR2, 2); + clk[epit1_hf_gate] = imx_clk_gate2("epit1_hf_gate", "per_root", MXC_CCM_CCGR2, 4); + clk[epit2_ipg_gate] = imx_clk_gate2("epit2_ipg_gate", "ipg", MXC_CCM_CCGR2, 6); + clk[epit2_hf_gate] = imx_clk_gate2("epit2_hf_gate", "per_root", MXC_CCM_CCGR2, 8); for (i = 0; i < ARRAY_SIZE(clk); i++) if (IS_ERR(clk[i])) pr_err("i.MX5 clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[gpt_gate], "per", "imx-gpt.0"); + clk_register_clkdev(clk[gpt_hf_gate], "per", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_gate], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[uart1_per_gate], "per", "imx21-uart.0"); clk_register_clkdev(clk[uart1_ipg_gate], "ipg", "imx21-uart.0"); @@ -248,7 +253,7 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[ecspi1_ipg_gate], "ipg", "imx51-ecspi.0"); clk_register_clkdev(clk[ecspi2_per_gate], "per", "imx51-ecspi.1"); clk_register_clkdev(clk[ecspi2_ipg_gate], "ipg", "imx51-ecspi.1"); - clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx51-cspi.0"); + clk_register_clkdev(clk[cspi_ipg_gate], NULL, "imx35-cspi.2"); clk_register_clkdev(clk[pwm1_ipg_gate], "pwm", "mxc_pwm.0"); clk_register_clkdev(clk[pwm2_ipg_gate], "pwm", "mxc_pwm.1"); clk_register_clkdev(clk[i2c1_gate], NULL, "imx-i2c.0"); @@ -279,6 +284,11 @@ static void __init mx5_clocks_common_init(unsigned long rate_ckil, clk_register_clkdev(clk[dummy], NULL, "imx-keypad"); clk_register_clkdev(clk[tve_gate], NULL, "imx-tve.0"); clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx-tve.0"); + clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL); + clk_register_clkdev(clk[epit1_ipg_gate], "ipg", "imx-epit.0"); + clk_register_clkdev(clk[epit1_hf_gate], "per", "imx-epit.0"); + clk_register_clkdev(clk[epit2_ipg_gate], "ipg", "imx-epit.1"); + clk_register_clkdev(clk[epit2_hf_gate], "per", "imx-epit.1"); /* Set SDHC parents to be PLL2 */ clk_set_parent(clk[esdhc_a_sel], clk[pll2_sw]); @@ -336,7 +346,6 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[mx51_mipi], "mipi_hsp", NULL); clk_register_clkdev(clk[vpu_gate], NULL, "imx51-vpu.0"); clk_register_clkdev(clk[fec_gate], NULL, "imx27-fec.0"); - clk_register_clkdev(clk[gpc_dvfs], "gpc_dvfs", NULL); clk_register_clkdev(clk[ipu_gate], "bus", "imx51-ipu"); clk_register_clkdev(clk[ipu_di0_gate], "di0", "imx51-ipu"); clk_register_clkdev(clk[ipu_di1_gate], "di1", "imx51-ipu"); diff --git a/arch/arm/mach-imx/clk-imx6q.c b/arch/arm/mach-imx/clk-imx6q.c index 17dc66a085a51667ab163d63ecba967ce41b139e..ea89520b6e223fd3ab4db3227574c7299605e265 100644 --- a/arch/arm/mach-imx/clk-imx6q.c +++ b/arch/arm/mach-imx/clk-imx6q.c @@ -147,18 +147,19 @@ enum mx6q_clks { esai, gpt_ipg, gpt_ipg_per, gpu2d_core, gpu3d_core, hdmi_iahb, hdmi_isfr, i2c1, i2c2, i2c3, iim, enfc, ipu1, ipu1_di0, ipu1_di1, ipu2, ipu2_di0, ldb_di0, ldb_di1, ipu2_di1, hsi_tx, mlb, mmdc_ch0_axi, - mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, + mmdc_ch1_axi, ocram, openvg_axi, pcie_axi, pwm1, pwm2, pwm3, pwm4, per1_bch, gpmi_bch_apb, gpmi_bch, gpmi_io, gpmi_apb, sata, sdma, spba, ssi1, ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3, usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg, pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg, - ssi2_ipg, ssi3_ipg, clk_max + ssi2_ipg, ssi3_ipg, rom, usbphy1, usbphy2, + clk_max }; static struct clk *clk[clk_max]; static enum mx6q_clks const clks_init_on[] __initconst = { - mmdc_ch0_axi, mmdc_ch1_axi, + mmdc_ch0_axi, rom, }; int __init mx6q_clocks_init(void) @@ -197,6 +198,9 @@ int __init mx6q_clocks_init(void) clk[pll7_usb_host] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_usb_host","osc", base + 0x20, 0x2000, 0x3); clk[pll8_enet] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll8_enet", "osc", base + 0xe0, 0x182000, 0x3); + clk[usbphy1] = imx_clk_gate("usbphy1", "pll3_usb_otg", base + 0x10, 6); + clk[usbphy2] = imx_clk_gate("usbphy2", "pll7_usb_host", base + 0x20, 6); + /* name parent_name reg idx */ clk[pll2_pfd0_352m] = imx_clk_pfd("pll2_pfd0_352m", "pll2_bus", base + 0x100, 0); clk[pll2_pfd1_594m] = imx_clk_pfd("pll2_pfd1_594m", "pll2_bus", base + 0x100, 1); @@ -317,7 +321,7 @@ int __init mx6q_clocks_init(void) clk[ahb] = imx_clk_busy_divider("ahb", "periph", base + 0x14, 10, 3, base + 0x48, 1); /* name parent_name reg shift */ - clk[apbh_dma] = imx_clk_gate2("apbh_dma", "ahb", base + 0x68, 4); + clk[apbh_dma] = imx_clk_gate2("apbh_dma", "usdhc3", base + 0x68, 4); clk[asrc] = imx_clk_gate2("asrc", "asrc_podf", base + 0x68, 6); clk[can1_ipg] = imx_clk_gate2("can1_ipg", "ipg", base + 0x68, 14); clk[can1_serial] = imx_clk_gate2("can1_serial", "can_root", base + 0x68, 16); @@ -356,6 +360,7 @@ int __init mx6q_clocks_init(void) clk[ocram] = imx_clk_gate2("ocram", "ahb", base + 0x74, 28); clk[openvg_axi] = imx_clk_gate2("openvg_axi", "axi", base + 0x74, 30); clk[pcie_axi] = imx_clk_gate2("pcie_axi", "pcie_axi_sel", base + 0x78, 0); + clk[per1_bch] = imx_clk_gate2("per1_bch", "usdhc3", base + 0x78, 12); clk[pwm1] = imx_clk_gate2("pwm1", "ipg_per", base + 0x78, 16); clk[pwm2] = imx_clk_gate2("pwm2", "ipg_per", base + 0x78, 18); clk[pwm3] = imx_clk_gate2("pwm3", "ipg_per", base + 0x78, 20); @@ -364,6 +369,7 @@ int __init mx6q_clocks_init(void) clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26); clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28); clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30); + clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0); clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4); clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6); clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12); @@ -386,12 +392,21 @@ int __init mx6q_clocks_init(void) pr_err("i.MX6q clk %d: register failed with %ld\n", i, PTR_ERR(clk[i])); - clk_register_clkdev(clk[mmdc_ch0_axi], NULL, "mmdc_ch0_axi"); - clk_register_clkdev(clk[mmdc_ch1_axi], NULL, "mmdc_ch1_axi"); clk_register_clkdev(clk[gpt_ipg], "ipg", "imx-gpt.0"); clk_register_clkdev(clk[gpt_ipg_per], "per", "imx-gpt.0"); clk_register_clkdev(clk[twd], NULL, "smp_twd"); - clk_register_clkdev(clk[usboh3], NULL, "usboh3"); + clk_register_clkdev(clk[apbh_dma], NULL, "110000.dma-apbh"); + clk_register_clkdev(clk[per1_bch], "per1_bch", "112000.gpmi-nand"); + clk_register_clkdev(clk[gpmi_bch_apb], "gpmi_bch_apb", "112000.gpmi-nand"); + clk_register_clkdev(clk[gpmi_bch], "gpmi_bch", "112000.gpmi-nand"); + clk_register_clkdev(clk[gpmi_apb], "gpmi_apb", "112000.gpmi-nand"); + clk_register_clkdev(clk[gpmi_io], "gpmi_io", "112000.gpmi-nand"); + clk_register_clkdev(clk[usboh3], NULL, "2184000.usb"); + clk_register_clkdev(clk[usboh3], NULL, "2184200.usb"); + clk_register_clkdev(clk[usboh3], NULL, "2184400.usb"); + clk_register_clkdev(clk[usboh3], NULL, "2184600.usb"); + clk_register_clkdev(clk[usbphy1], NULL, "20c9000.usbphy"); + clk_register_clkdev(clk[usbphy2], NULL, "20ca000.usbphy"); clk_register_clkdev(clk[uart_serial], "per", "2020000.serial"); clk_register_clkdev(clk[uart_ipg], "ipg", "2020000.serial"); clk_register_clkdev(clk[uart_serial], "per", "21e8000.serial"); diff --git a/arch/arm/mach-imx/devices-imx21.h b/arch/arm/mach-imx/devices-imx21.h index 2628e0c474dc2538f6a5b8c486a80fbabda738c7..93ece55f75dfbf3014039968a6a740d7cecd1900 100644 --- a/arch/arm/mach-imx/devices-imx21.h +++ b/arch/arm/mach-imx/devices-imx21.h @@ -14,7 +14,7 @@ extern const struct imx_imx21_hcd_data imx21_imx21_hcd_data; imx_add_imx21_hcd(&imx21_imx21_hcd_data, pdata) extern const struct imx_imx2_wdt_data imx21_imx2_wdt_data; -#define imx21_add_imx2_wdt(pdata) \ +#define imx21_add_imx2_wdt() \ imx_add_imx2_wdt(&imx21_imx2_wdt_data) extern const struct imx_imx_fb_data imx21_imx_fb_data; @@ -50,7 +50,7 @@ extern const struct imx_mxc_nand_data imx21_mxc_nand_data; imx_add_mxc_nand(&imx21_mxc_nand_data, pdata) extern const struct imx_mxc_w1_data imx21_mxc_w1_data; -#define imx21_add_mxc_w1(pdata) \ +#define imx21_add_mxc_w1() \ imx_add_mxc_w1(&imx21_mxc_w1_data) extern const struct imx_spi_imx_data imx21_cspi_data[]; diff --git a/arch/arm/mach-imx/devices-imx25.h b/arch/arm/mach-imx/devices-imx25.h index efa0761c508d7707ddba2f33b6d52f7cffb46cd9..f8e03dd1f116f16a8f175403c6e6cd62756caa2d 100644 --- a/arch/arm/mach-imx/devices-imx25.h +++ b/arch/arm/mach-imx/devices-imx25.h @@ -24,11 +24,11 @@ extern const struct imx_fsl_usb2_udc_data imx25_fsl_usb2_udc_data; imx_add_fsl_usb2_udc(&imx25_fsl_usb2_udc_data, pdata) extern struct imx_imxdi_rtc_data imx25_imxdi_rtc_data; -#define imx25_add_imxdi_rtc(pdata) \ +#define imx25_add_imxdi_rtc() \ imx_add_imxdi_rtc(&imx25_imxdi_rtc_data) extern const struct imx_imx2_wdt_data imx25_imx2_wdt_data; -#define imx25_add_imx2_wdt(pdata) \ +#define imx25_add_imx2_wdt() \ imx_add_imx2_wdt(&imx25_imx2_wdt_data) extern const struct imx_imx_fb_data imx25_imx_fb_data; diff --git a/arch/arm/mach-imx/devices-imx27.h b/arch/arm/mach-imx/devices-imx27.h index 28537a5d904801a1c38a8d5bac171bbd2104e9cf..436c5720fe6a40255a2c3bc5ab05378c23855e02 100644 --- a/arch/arm/mach-imx/devices-imx27.h +++ b/arch/arm/mach-imx/devices-imx27.h @@ -18,7 +18,7 @@ extern const struct imx_fsl_usb2_udc_data imx27_fsl_usb2_udc_data; imx_add_fsl_usb2_udc(&imx27_fsl_usb2_udc_data, pdata) extern const struct imx_imx2_wdt_data imx27_imx2_wdt_data; -#define imx27_add_imx2_wdt(pdata) \ +#define imx27_add_imx2_wdt() \ imx_add_imx2_wdt(&imx27_imx2_wdt_data) extern const struct imx_imx_fb_data imx27_imx_fb_data; @@ -50,7 +50,7 @@ extern const struct imx_imx_uart_1irq_data imx27_imx_uart_data[]; extern const struct imx_mx2_camera_data imx27_mx2_camera_data; #define imx27_add_mx2_camera(pdata) \ imx_add_mx2_camera(&imx27_mx2_camera_data, pdata) -#define imx27_add_mx2_emmaprp(pdata) \ +#define imx27_add_mx2_emmaprp() \ imx_add_mx2_emmaprp(&imx27_mx2_camera_data) extern const struct imx_mxc_ehci_data imx27_mxc_ehci_otg_data; @@ -69,7 +69,7 @@ extern const struct imx_mxc_nand_data imx27_mxc_nand_data; imx_add_mxc_nand(&imx27_mxc_nand_data, pdata) extern const struct imx_mxc_w1_data imx27_mxc_w1_data; -#define imx27_add_mxc_w1(pdata) \ +#define imx27_add_mxc_w1() \ imx_add_mxc_w1(&imx27_mxc_w1_data) extern const struct imx_spi_imx_data imx27_cspi_data[]; diff --git a/arch/arm/mach-imx/devices-imx31.h b/arch/arm/mach-imx/devices-imx31.h index 488e241a6db638b90f2da3ca38108cb0eea42a8b..8b2ceb45bb8344223dae53b974e345237c707479 100644 --- a/arch/arm/mach-imx/devices-imx31.h +++ b/arch/arm/mach-imx/devices-imx31.h @@ -14,7 +14,7 @@ extern const struct imx_fsl_usb2_udc_data imx31_fsl_usb2_udc_data; imx_add_fsl_usb2_udc(&imx31_fsl_usb2_udc_data, pdata) extern const struct imx_imx2_wdt_data imx31_imx2_wdt_data; -#define imx31_add_imx2_wdt(pdata) \ +#define imx31_add_imx2_wdt() \ imx_add_imx2_wdt(&imx31_imx2_wdt_data) extern const struct imx_imx_i2c_data imx31_imx_i2c_data[]; @@ -42,8 +42,8 @@ extern const struct imx_imx_uart_1irq_data imx31_imx_uart_data[]; #define imx31_add_imx_uart4(pdata) imx31_add_imx_uart(4, pdata) extern const struct imx_ipu_core_data imx31_ipu_core_data; -#define imx31_add_ipu_core(pdata) \ - imx_add_ipu_core(&imx31_ipu_core_data, pdata) +#define imx31_add_ipu_core() \ + imx_add_ipu_core(&imx31_ipu_core_data) #define imx31_alloc_mx3_camera(pdata) \ imx_alloc_mx3_camera(&imx31_ipu_core_data, pdata) #define imx31_add_mx3_sdc_fb(pdata) \ @@ -65,11 +65,11 @@ extern const struct imx_mxc_nand_data imx31_mxc_nand_data; imx_add_mxc_nand(&imx31_mxc_nand_data, pdata) extern const struct imx_mxc_rtc_data imx31_mxc_rtc_data; -#define imx31_add_mxc_rtc(pdata) \ +#define imx31_add_mxc_rtc() \ imx_add_mxc_rtc(&imx31_mxc_rtc_data) extern const struct imx_mxc_w1_data imx31_mxc_w1_data; -#define imx31_add_mxc_w1(pdata) \ +#define imx31_add_mxc_w1() \ imx_add_mxc_w1(&imx31_mxc_w1_data) extern const struct imx_spi_imx_data imx31_cspi_data[]; diff --git a/arch/arm/mach-imx/devices-imx35.h b/arch/arm/mach-imx/devices-imx35.h index 7b99ef0bb50111f24fb97a0aca09a3a3517cabc3..c3e9f206ac2bdfdff093b2a082dbddd168aa4d05 100644 --- a/arch/arm/mach-imx/devices-imx35.h +++ b/arch/arm/mach-imx/devices-imx35.h @@ -24,7 +24,7 @@ extern const struct imx_flexcan_data imx35_flexcan_data[]; #define imx35_add_flexcan1(pdata) imx35_add_flexcan(1, pdata) extern const struct imx_imx2_wdt_data imx35_imx2_wdt_data; -#define imx35_add_imx2_wdt(pdata) \ +#define imx35_add_imx2_wdt() \ imx_add_imx2_wdt(&imx35_imx2_wdt_data) extern const struct imx_imx_i2c_data imx35_imx_i2c_data[]; @@ -50,8 +50,8 @@ extern const struct imx_imx_uart_1irq_data imx35_imx_uart_data[]; #define imx35_add_imx_uart2(pdata) imx35_add_imx_uart(2, pdata) extern const struct imx_ipu_core_data imx35_ipu_core_data; -#define imx35_add_ipu_core(pdata) \ - imx_add_ipu_core(&imx35_ipu_core_data, pdata) +#define imx35_add_ipu_core() \ + imx_add_ipu_core(&imx35_ipu_core_data) #define imx35_alloc_mx3_camera(pdata) \ imx_alloc_mx3_camera(&imx35_ipu_core_data, pdata) #define imx35_add_mx3_sdc_fb(pdata) \ @@ -68,8 +68,12 @@ extern const struct imx_mxc_nand_data imx35_mxc_nand_data; #define imx35_add_mxc_nand(pdata) \ imx_add_mxc_nand(&imx35_mxc_nand_data, pdata) +extern const struct imx_mxc_rtc_data imx35_mxc_rtc_data; +#define imx35_add_mxc_rtc() \ + imx_add_mxc_rtc(&imx35_mxc_rtc_data) + extern const struct imx_mxc_w1_data imx35_mxc_w1_data; -#define imx35_add_mxc_w1(pdata) \ +#define imx35_add_mxc_w1() \ imx_add_mxc_w1(&imx35_mxc_w1_data) extern const struct imx_sdhci_esdhc_imx_data imx35_sdhci_esdhc_imx_data[]; diff --git a/arch/arm/mach-imx/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h index af488bc0e2256df020b37c770f534bcc0cde01e1..9f1718725195414e0798a40d49c932838f7b4235 100644 --- a/arch/arm/mach-imx/devices-imx51.h +++ b/arch/arm/mach-imx/devices-imx51.h @@ -55,7 +55,7 @@ extern const struct imx_spi_imx_data imx51_ecspi_data[]; imx_add_spi_imx(&imx51_ecspi_data[id], pdata) extern const struct imx_imx2_wdt_data imx51_imx2_wdt_data[]; -#define imx51_add_imx2_wdt(id, pdata) \ +#define imx51_add_imx2_wdt(id) \ imx_add_imx2_wdt(&imx51_imx2_wdt_data[id]) extern const struct imx_mxc_pwm_data imx51_mxc_pwm_data[]; diff --git a/arch/arm/mach-imx/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h index 6e1e5d1f8c3a9886cd40f47c29e768431d5b416d..77e0db96c4483c4592099fb7639678a180f84190 100644 --- a/arch/arm/mach-imx/devices-imx53.h +++ b/arch/arm/mach-imx/devices-imx53.h @@ -30,7 +30,7 @@ extern const struct imx_spi_imx_data imx53_ecspi_data[]; imx_add_spi_imx(&imx53_ecspi_data[id], pdata) extern const struct imx_imx2_wdt_data imx53_imx2_wdt_data[]; -#define imx53_add_imx2_wdt(id, pdata) \ +#define imx53_add_imx2_wdt(id) \ imx_add_imx2_wdt(&imx53_imx2_wdt_data[id]) extern const struct imx_imx_ssi_data imx53_imx_ssi_data[]; diff --git a/arch/arm/mach-imx/ehci-imx25.c b/arch/arm/mach-imx/ehci-imx25.c index 865daf0b09e97e0dfa50721096a30dbe1ec0358d..05bb41d99728b3911ea6cfb8203a08cece9bdba7 100644 --- a/arch/arm/mach-imx/ehci-imx25.c +++ b/arch/arm/mach-imx/ehci-imx25.c @@ -24,14 +24,18 @@ #define MX25_OTG_SIC_SHIFT 29 #define MX25_OTG_SIC_MASK (0x3 << MX25_OTG_SIC_SHIFT) #define MX25_OTG_PM_BIT (1 << 24) +#define MX25_OTG_PP_BIT (1 << 11) +#define MX25_OTG_OCPOL_BIT (1 << 3) #define MX25_H1_SIC_SHIFT 21 #define MX25_H1_SIC_MASK (0x3 << MX25_H1_SIC_SHIFT) +#define MX25_H1_PP_BIT (1 << 18) #define MX25_H1_PM_BIT (1 << 8) #define MX25_H1_IPPUE_UP_BIT (1 << 7) #define MX25_H1_IPPUE_DOWN_BIT (1 << 6) #define MX25_H1_TLL_BIT (1 << 5) #define MX25_H1_USBTE_BIT (1 << 4) +#define MX25_H1_OCPOL_BIT (1 << 2) int mx25_initialize_usb_hw(int port, unsigned int flags) { @@ -41,21 +45,35 @@ int mx25_initialize_usb_hw(int port, unsigned int flags) switch (port) { case 0: /* OTG port */ - v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT); + v &= ~(MX25_OTG_SIC_MASK | MX25_OTG_PM_BIT | MX25_OTG_PP_BIT | + MX25_OTG_OCPOL_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_OTG_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX25_OTG_PM_BIT; + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX25_OTG_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX25_OTG_OCPOL_BIT; + break; case 1: /* H1 port */ - v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_TLL_BIT | - MX25_H1_USBTE_BIT | MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT); + v &= ~(MX25_H1_SIC_MASK | MX25_H1_PM_BIT | MX25_H1_PP_BIT | + MX25_H1_OCPOL_BIT | MX25_H1_TLL_BIT | MX25_H1_USBTE_BIT | + MX25_H1_IPPUE_DOWN_BIT | MX25_H1_IPPUE_UP_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX25_H1_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX25_H1_PM_BIT; + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX25_H1_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX25_H1_OCPOL_BIT; + if (!(flags & MXC_EHCI_TTL_ENABLED)) v |= MX25_H1_TLL_BIT; diff --git a/arch/arm/mach-imx/ehci-imx35.c b/arch/arm/mach-imx/ehci-imx35.c index 001ec3971f5da93de19c7e2db9153a32f4347348..73574c30cf50ca97c337eaa4ec9bd58d7a2c9dab 100644 --- a/arch/arm/mach-imx/ehci-imx35.c +++ b/arch/arm/mach-imx/ehci-imx35.c @@ -24,14 +24,18 @@ #define MX35_OTG_SIC_SHIFT 29 #define MX35_OTG_SIC_MASK (0x3 << MX35_OTG_SIC_SHIFT) #define MX35_OTG_PM_BIT (1 << 24) +#define MX35_OTG_PP_BIT (1 << 11) +#define MX35_OTG_OCPOL_BIT (1 << 3) #define MX35_H1_SIC_SHIFT 21 #define MX35_H1_SIC_MASK (0x3 << MX35_H1_SIC_SHIFT) +#define MX35_H1_PP_BIT (1 << 18) #define MX35_H1_PM_BIT (1 << 8) #define MX35_H1_IPPUE_UP_BIT (1 << 7) #define MX35_H1_IPPUE_DOWN_BIT (1 << 6) #define MX35_H1_TLL_BIT (1 << 5) #define MX35_H1_USBTE_BIT (1 << 4) +#define MX35_H1_OCPOL_BIT (1 << 2) int mx35_initialize_usb_hw(int port, unsigned int flags) { @@ -41,21 +45,35 @@ int mx35_initialize_usb_hw(int port, unsigned int flags) switch (port) { case 0: /* OTG port */ - v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT); + v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT | MX35_OTG_PP_BIT | + MX35_OTG_OCPOL_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_OTG_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX35_OTG_PM_BIT; + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX35_OTG_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX35_OTG_OCPOL_BIT; + break; case 1: /* H1 port */ - v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT | - MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); + v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_PP_BIT | + MX35_H1_OCPOL_BIT | MX35_H1_TLL_BIT | MX35_H1_USBTE_BIT | + MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT); v |= (flags & MXC_EHCI_INTERFACE_MASK) << MX35_H1_SIC_SHIFT; if (!(flags & MXC_EHCI_POWER_PINS_ENABLED)) v |= MX35_H1_PM_BIT; + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MX35_H1_PP_BIT; + + if (!(flags & MXC_EHCI_OC_PIN_ACTIVE_LOW)) + v |= MX35_H1_OCPOL_BIT; + if (!(flags & MXC_EHCI_TTL_ENABLED)) v |= MX35_H1_TLL_BIT; diff --git a/arch/arm/mach-imx/ehci-imx5.c b/arch/arm/mach-imx/ehci-imx5.c index c17fa131728b227dcbc44a3ede131e58a12919ee..a6a4afb0ad62d8a6738d70cc81137b5a2f014571 100644 --- a/arch/arm/mach-imx/ehci-imx5.c +++ b/arch/arm/mach-imx/ehci-imx5.c @@ -28,11 +28,14 @@ #define MXC_OTG_UCTRL_OPM_BIT (1 << 24) /* OTG power mask */ #define MXC_H1_UCTRL_H1UIE_BIT (1 << 12) /* Host1 ULPI interrupt enable */ #define MXC_H1_UCTRL_H1WIE_BIT (1 << 11) /* HOST1 wakeup intr enable */ -#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ +#define MXC_H1_UCTRL_H1PM_BIT (1 << 8) /* HOST1 power mask */ /* USB_PHY_CTRL_FUNC */ +#define MXC_OTG_PHYCTRL_OC_POL_BIT (1 << 9) /* OTG Polarity of Overcurrent */ #define MXC_OTG_PHYCTRL_OC_DIS_BIT (1 << 8) /* OTG Disable Overcurrent Event */ +#define MXC_H1_OC_POL_BIT (1 << 6) /* UH1 Polarity of Overcurrent */ #define MXC_H1_OC_DIS_BIT (1 << 5) /* UH1 Disable Overcurrent Event */ +#define MXC_OTG_PHYCTRL_PWR_POL_BIT (1 << 3) /* OTG Power Pin Polarity */ /* USBH2CTRL */ #define MXC_H2_UCTRL_H2UIE_BIT (1 << 8) @@ -80,13 +83,21 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) if (flags & MXC_EHCI_INTERNAL_PHY) { v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_OTG_PHYCTRL_OC_POL_BIT; + else + v &= ~MXC_OTG_PHYCTRL_OC_POL_BIT; if (flags & MXC_EHCI_POWER_PINS_ENABLED) { - /* OC/USBPWR is not used */ - v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; - } else { /* OC/USBPWR is used */ v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT; + } else { + /* OC/USBPWR is not used */ + v |= MXC_OTG_PHYCTRL_OC_DIS_BIT; } + if (flags & MXC_EHCI_PWR_PIN_ACTIVE_HIGH) + v |= MXC_OTG_PHYCTRL_PWR_POL_BIT; + else + v &= ~MXC_OTG_PHYCTRL_PWR_POL_BIT; __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET); @@ -95,9 +106,9 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) else v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */ if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v |= MXC_OTG_UCTRL_OPM_BIT; - else v &= ~MXC_OTG_UCTRL_OPM_BIT; + else + v |= MXC_OTG_UCTRL_OPM_BIT; __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); } break; @@ -113,12 +124,16 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) } if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ + v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask unused*/ else v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/ __raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET); v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET); + if (flags & MXC_EHCI_OC_PIN_ACTIVE_LOW) + v |= MXC_H1_OC_POL_BIT; + else + v &= ~MXC_H1_OC_POL_BIT; if (flags & MXC_EHCI_POWER_PINS_ENABLED) v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */ else @@ -142,7 +157,7 @@ int mx51_initialize_usb_hw(int port, unsigned int flags) } if (flags & MXC_EHCI_POWER_PINS_ENABLED) - v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ + v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask unused*/ else v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/ __raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET); diff --git a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c index b46cab0ced5383976aee183f0a49ac4f283ab83b..fd3177f9e79ad2be616fb4d70b1f71f48daf9fdf 100644 --- a/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimx27-baseboard.c @@ -266,7 +266,7 @@ static struct spi_board_info __maybe_unused .bus_num = 0, .chip_select = 0, .max_speed_hz = 1500000, - .irq = IRQ_GPIOD(25), + /* irq number is run-time assigned */ .platform_data = &ads7846_config, .mode = SPI_MODE_2, }, @@ -329,6 +329,7 @@ void __init eukrea_mbimx27_baseboard_init(void) /* SPI_CS0 init */ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT); imx27_add_spi_imx0(&eukrea_mbimx27_spi0_data); + eukrea_mbimx27_spi_board_info[0].irq = gpio_to_irq(IMX_GPIO_NR(4, 25)); spi_register_board_info(eukrea_mbimx27_spi_board_info, ARRAY_SIZE(eukrea_mbimx27_spi_board_info)); diff --git a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c index 557f6c4860535f7bef1d7860acd0f57e54bda7a1..6e9dd12a6961cf8bf7e6fc8cf8053a12ca13fd32 100644 --- a/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c +++ b/arch/arm/mach-imx/eukrea_mbimxsd35-baseboard.c @@ -95,10 +95,6 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "CMO-QVGA", .mode = fb_modedb, @@ -287,7 +283,7 @@ void __init eukrea_mbimxsd35_baseboard_init(void) printk(KERN_ERR "error setting mbimxsd pads !\n"); imx35_add_imx_uart1(&uart_pdata); - imx35_add_ipu_core(&mx3_ipu_data); + imx35_add_ipu_core(); imx35_add_mx3_sdc_fb(&mx3fb_pdata); imx35_add_imx_ssi(0, &eukrea_mbimxsd_ssi_pdata); diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c index eee0cc8d92a43e84300723b05e6e9bb86bcb84f1..e80d5235dac0201346aeac09ab9045608bfbe9b5 100644 --- a/arch/arm/mach-imx/imx27-dt.c +++ b/arch/arm/mach-imx/imx27-dt.c @@ -10,7 +10,6 @@ */ #include -#include #include #include #include @@ -33,35 +32,8 @@ static const struct of_dev_auxdata imx27_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static int __init imx27_avic_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - irq_domain_add_legacy(np, 64, 0, 0, &irq_domain_simple_ops, NULL); - return 0; -} - -static int __init imx27_gpio_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - - gpio_irq_base -= 32; - irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, - NULL); - - return 0; -} - -static const struct of_device_id imx27_irq_match[] __initconst = { - { .compatible = "fsl,imx27-avic", .data = imx27_avic_add_irq_domain, }, - { .compatible = "fsl,imx27-gpio", .data = imx27_gpio_add_irq_domain, }, - { /* sentinel */ } -}; - static void __init imx27_dt_init(void) { - of_irq_init(imx27_irq_match); - of_platform_populate(NULL, of_default_bus_match_table, imx27_auxdata_lookup, NULL); } @@ -75,7 +47,7 @@ static struct sys_timer imx27_timer = { .init = imx27_timer_init, }; -static const char *imx27_dt_board_compat[] __initdata = { +static const char * const imx27_dt_board_compat[] __initconst = { "fsl,imx27", NULL }; diff --git a/arch/arm/mach-imx/imx31-dt.c b/arch/arm/mach-imx/imx31-dt.c new file mode 100644 index 0000000000000000000000000000000000000000..a68ba207b2b790ce3d0bce0f41a134349647a6af --- /dev/null +++ b/arch/arm/mach-imx/imx31-dt.c @@ -0,0 +1,63 @@ +/* + * Copyright 2012 Sascha Hauer, Pengutronix + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include + +static const struct of_dev_auxdata imx31_auxdata_lookup[] __initconst = { + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART1_BASE_ADDR, + "imx21-uart.0", NULL), + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART2_BASE_ADDR, + "imx21-uart.1", NULL), + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART3_BASE_ADDR, + "imx21-uart.2", NULL), + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART4_BASE_ADDR, + "imx21-uart.3", NULL), + OF_DEV_AUXDATA("fsl,imx31-uart", MX31_UART5_BASE_ADDR, + "imx21-uart.4", NULL), + { /* sentinel */ } +}; + +static void __init imx31_dt_init(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + imx31_auxdata_lookup, NULL); +} + +static void __init imx31_timer_init(void) +{ + mx31_clocks_init_dt(); +} + +static struct sys_timer imx31_timer = { + .init = imx31_timer_init, +}; + +static const char *imx31_dt_board_compat[] __initdata = { + "fsl,imx31", + NULL +}; + +DT_MACHINE_START(IMX31_DT, "Freescale i.MX31 (Device Tree Support)") + .map_io = mx31_map_io, + .init_early = imx31_init_early, + .init_irq = mx31_init_irq, + .handle_irq = imx31_handle_irq, + .timer = &imx31_timer, + .init_machine = imx31_dt_init, + .dt_compat = imx31_dt_board_compat, + .restart = mxc_restart, +MACHINE_END diff --git a/arch/arm/mach-imx/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c index 18e78dba4298ad90aebc7f0a86e44e723d413924..d4067fe363575955739c22d2f59ef142d97f6669 100644 --- a/arch/arm/mach-imx/imx51-dt.c +++ b/arch/arm/mach-imx/imx51-dt.c @@ -11,7 +11,6 @@ */ #include -#include #include #include #include @@ -45,30 +44,6 @@ static const struct of_dev_auxdata imx51_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static int __init imx51_tzic_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL); - return 0; -} - -static int __init imx51_gpio_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - - gpio_irq_base -= 32; - irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL); - - return 0; -} - -static const struct of_device_id imx51_irq_match[] __initconst = { - { .compatible = "fsl,imx51-tzic", .data = imx51_tzic_add_irq_domain, }, - { .compatible = "fsl,imx51-gpio", .data = imx51_gpio_add_irq_domain, }, - { /* sentinel */ } -}; - static const struct of_device_id imx51_iomuxc_of_match[] __initconst = { { .compatible = "fsl,imx51-iomuxc-babbage", .data = imx51_babbage_common_init, }, { /* sentinel */ } @@ -80,8 +55,6 @@ static void __init imx51_dt_init(void) const struct of_device_id *of_id; void (*func)(void); - of_irq_init(imx51_irq_match); - pinctrl_provide_dummies(); node = of_find_matching_node(NULL, imx51_iomuxc_of_match); diff --git a/arch/arm/mach-imx/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c index eb04b6248e48ee9a93751ede8c6cafee15904896..1b7a2fc36591e1806af4345be6f00fbec9bd70a8 100644 --- a/arch/arm/mach-imx/imx53-dt.c +++ b/arch/arm/mach-imx/imx53-dt.c @@ -15,7 +15,6 @@ #include #include #include -#include #include #include #include @@ -52,30 +51,6 @@ static const struct of_dev_auxdata imx53_auxdata_lookup[] __initconst = { { /* sentinel */ } }; -static int __init imx53_tzic_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - irq_domain_add_legacy(np, 128, 0, 0, &irq_domain_simple_ops, NULL); - return 0; -} - -static int __init imx53_gpio_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - - gpio_irq_base -= 32; - irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, NULL); - - return 0; -} - -static const struct of_device_id imx53_irq_match[] __initconst = { - { .compatible = "fsl,imx53-tzic", .data = imx53_tzic_add_irq_domain, }, - { .compatible = "fsl,imx53-gpio", .data = imx53_gpio_add_irq_domain, }, - { /* sentinel */ } -}; - static const struct of_device_id imx53_iomuxc_of_match[] __initconst = { { .compatible = "fsl,imx53-iomuxc-ard", .data = imx53_ard_common_init, }, { .compatible = "fsl,imx53-iomuxc-evk", .data = imx53_evk_common_init, }, @@ -103,8 +78,6 @@ static void __init imx53_dt_init(void) const struct of_device_id *of_id; void (*func)(void); - of_irq_init(imx53_irq_match); - pinctrl_provide_dummies(); node = of_find_matching_node(NULL, imx53_iomuxc_of_match); @@ -147,6 +120,7 @@ DT_MACHINE_START(IMX53_DT, "Freescale i.MX53 (Device Tree Support)") .handle_irq = imx53_handle_irq, .timer = &imx53_timer, .init_machine = imx53_dt_init, + .init_late = imx53_init_late, .dt_compat = imx53_dt_board_compat, .restart = mxc_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-apf9328.c b/arch/arm/mach-imx/mach-apf9328.c index f4a63ee9e2174010f02aad2ca51123c48c02f38e..7b99a79722b6fbe638829ad8946877f11eb5c353 100644 --- a/arch/arm/mach-imx/mach-apf9328.c +++ b/arch/arm/mach-imx/mach-apf9328.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -26,7 +27,6 @@ #include #include -#include #include #include "devices-imx1.h" @@ -87,8 +87,7 @@ static struct resource dm9000_resources[] = { .end = MX1_CS4_PHYS + 0x00C00003, .flags = IORESOURCE_MEM, }, { - .start = IRQ_GPIOB(14), - .end = IRQ_GPIOB(14), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -129,6 +128,8 @@ static void __init apf9328_init(void) imx1_add_imx_i2c(&apf9328_i2c_data); + dm9000_resources[2].start = gpio_to_irq(IMX_GPIO_NR(2, 14)); + dm9000_resources[2].end = gpio_to_irq(IMX_GPIO_NR(2, 14)); platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index c650145d1646e6dbdfbe65ec4c96c7c56d611cd5..2c6ab3273f9e4d4a419e54a4f7cde417fdb213a6 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -367,10 +367,6 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "CRT-VGA", .mode = fb_modedb, @@ -408,7 +404,8 @@ static int armadillo5x0_sdhc1_init(struct device *dev, gpio_direction_input(gpio_wp); /* When supported the trigger type have to be BOTH */ - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), detect_irq, + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), + detect_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING, "sdhc-detect", data); @@ -429,7 +426,7 @@ static int armadillo5x0_sdhc1_init(struct device *dev, static void armadillo5x0_sdhc1_exit(struct device *dev, void *data) { - free_irq(IOMUX_TO_IRQ(MX31_PIN_ATA_DMACK), data); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)), data); gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_DMACK)); gpio_free(IOMUX_TO_GPIO(MX31_PIN_ATA_RESET_B)); } @@ -450,8 +447,7 @@ static struct resource armadillo5x0_smc911x_resources[] = { .end = MX31_CS3_BASE_ADDR + SZ_32M - 1, .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL, }, }; @@ -498,6 +494,10 @@ static void __init armadillo5x0_init(void) regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + armadillo5x0_smc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + armadillo5x0_smc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); platform_add_devices(devices, ARRAY_SIZE(devices)); imx_add_gpio_keys(&armadillo5x0_button_data); imx31_add_imx_i2c1(NULL); @@ -513,7 +513,7 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_mmc(0, &sdhc_pdata); /* Register FB */ - imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* Register NOR Flash */ diff --git a/arch/arm/mach-imx/mach-cpuimx27.c b/arch/arm/mach-imx/mach-cpuimx27.c index d085aea087095e4750e104a54aaee02c7312b0cf..2bb9e18d9ee134a078c664c966c2de6d2d4342f5 100644 --- a/arch/arm/mach-imx/mach-cpuimx27.c +++ b/arch/arm/mach-imx/mach-cpuimx27.c @@ -169,28 +169,28 @@ static struct i2c_board_info eukrea_cpuimx27_i2c_devices[] = { static struct plat_serial8250_port serial_platform_data[] = { { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x200000), - .irq = IRQ_GPIOB(23), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x400000), - .irq = IRQ_GPIOB(22), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x800000), - .irq = IRQ_GPIOB(27), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, }, { .mapbase = (unsigned long)(MX27_CS3_BASE_ADDR + 0x1000000), - .irq = IRQ_GPIOB(30), + /* irq number is run-time assigned */ .uartclk = 14745600, .regshift = 1, .iotype = UPIO_MEM, @@ -233,18 +233,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx27_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx27_otg_mode); @@ -266,8 +266,8 @@ static void __init eukrea_cpuimx27_init(void) imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_imx2_wdt(NULL); - imx27_add_mxc_w1(NULL); + imx27_add_imx2_wdt(); + imx27_add_mxc_w1(); #if defined(CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2) /* SDHC2 can be used for Wifi */ @@ -279,6 +279,10 @@ static void __init eukrea_cpuimx27_init(void) #endif #if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE) + serial_platform_data[0].irq = IMX_GPIO_NR(2, 23); + serial_platform_data[1].irq = IMX_GPIO_NR(2, 22); + serial_platform_data[2].irq = IMX_GPIO_NR(2, 27); + serial_platform_data[3].irq = IMX_GPIO_NR(2, 30); platform_device_register(&serial_device); #endif diff --git a/arch/arm/mach-imx/mach-cpuimx35.c b/arch/arm/mach-imx/mach-cpuimx35.c index 6450303f1a7ac01e701adf8b886248a981c54856..d49b0ec6bdec839953f15775a03adb5546c17b6a 100644 --- a/arch/arm/mach-imx/mach-cpuimx35.c +++ b/arch/arm/mach-imx/mach-cpuimx35.c @@ -71,7 +71,7 @@ static struct i2c_board_info eukrea_cpuimx35_i2c_devices[] = { }, { I2C_BOARD_INFO("tsc2007", 0x48), .platform_data = &tsc2007_info, - .irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO), + /* irq number is run-time assigned */ }, }; @@ -141,18 +141,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .workaround = FLS_USB2_WORKAROUND_ENGCM09152, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx35_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx35_otg_mode); @@ -167,11 +167,12 @@ static void __init eukrea_cpuimx35_init(void) ARRAY_SIZE(eukrea_cpuimx35_pads)); imx35_add_fec(NULL); - imx35_add_imx2_wdt(NULL); + imx35_add_imx2_wdt(); imx35_add_imx_uart0(&uart_pdata); imx35_add_mxc_nand(&eukrea_cpuimx35_nand_board_info); + eukrea_cpuimx35_i2c_devices[1].irq = gpio_to_irq(TSC2007_IRQGPIO); i2c_register_board_info(0, eukrea_cpuimx35_i2c_devices, ARRAY_SIZE(eukrea_cpuimx35_i2c_devices)); imx35_add_imx_i2c0(&eukrea_cpuimx35_i2c0_data); diff --git a/arch/arm/mach-imx/mach-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c index 1e09de50cbcdc9292ad762d6228c7663fbfcc4a2..b87cc49ab1e8ec67e6504f54335115de95c3223d 100644 --- a/arch/arm/mach-imx/mach-cpuimx51sd.c +++ b/arch/arm/mach-imx/mach-cpuimx51sd.c @@ -217,18 +217,18 @@ static const struct mxc_usbh_platform_data usbh1_config __initconst = { .portsc = MXC_EHCI_MODE_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx51sd_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx51sd_otg_mode); @@ -258,7 +258,7 @@ static struct spi_board_info cpuimx51sd_spi_device[] = { .mode = SPI_MODE_0, .chip_select = 0, .platform_data = &mcp251x_info, - .irq = IMX_GPIO_TO_IRQ(CAN_IRQGPIO) + /* irq number is run-time assigned */ }, }; @@ -292,7 +292,7 @@ static void __init eukrea_cpuimx51sd_init(void) imx51_add_imx_uart(0, &uart_pdata); imx51_add_mxc_nand(&eukrea_cpuimx51sd_nand_board_info); - imx51_add_imx2_wdt(0, NULL); + imx51_add_imx2_wdt(0); gpio_request(ETH_RST, "eth_rst"); gpio_set_value(ETH_RST, 1); @@ -309,6 +309,7 @@ static void __init eukrea_cpuimx51sd_init(void) msleep(20); gpio_set_value(CAN_RST, 1); imx51_add_ecspi(0, &cpuimx51sd_ecspi1_pdata); + cpuimx51sd_spi_device[0].irq = gpio_to_irq(CAN_IRQGPIO); spi_register_board_info(cpuimx51sd_spi_device, ARRAY_SIZE(cpuimx51sd_spi_device)); diff --git a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c index d1e04e676e33b0cb4c516560d72c61030c64a5bd..017bbb70ea415b3b75c050dbf0952aa46374680c 100644 --- a/arch/arm/mach-imx/mach-eukrea_cpuimx25.c +++ b/arch/arm/mach-imx/mach-eukrea_cpuimx25.c @@ -109,18 +109,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .workaround = FLS_USB2_WORKAROUND_ENGCM09152, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init eukrea_cpuimx25_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", eukrea_cpuimx25_otg_mode); @@ -134,9 +134,9 @@ static void __init eukrea_cpuimx25_init(void) imx25_add_imx_uart0(&uart_pdata); imx25_add_mxc_nand(&eukrea_cpuimx25_nand_board_info); - imx25_add_imxdi_rtc(NULL); + imx25_add_imxdi_rtc(); imx25_add_fec(&mx25_fec_pdata); - imx25_add_imx2_wdt(NULL); + imx25_add_imx2_wdt(); i2c_register_board_info(0, eukrea_cpuimx25_i2c_devices, ARRAY_SIZE(eukrea_cpuimx25_i2c_devices)); diff --git a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c index f76edb96a48a671322f7a6c30935cfa524477463..f264ddddd47c395404203cdebf43b7dc2206abb0 100644 --- a/arch/arm/mach-imx/mach-imx27_visstrim_m10.c +++ b/arch/arm/mach-imx/mach-imx27_visstrim_m10.c @@ -38,8 +38,9 @@ #include #include #include -#include +#include #include +#include #include #include "devices-imx27.h" @@ -47,7 +48,7 @@ #define TVP5150_RSTN (GPIO_PORTC + 18) #define TVP5150_PWDN (GPIO_PORTC + 19) #define OTG_PHY_CS_GPIO (GPIO_PORTF + 17) -#define SDHC1_IRQ IRQ_GPIOB(25) +#define SDHC1_IRQ_GPIO IMX_GPIO_NR(2, 25) #define MOTHERBOARD_BIT2 (GPIO_PORTD + 31) #define MOTHERBOARD_BIT1 (GPIO_PORTD + 30) @@ -307,14 +308,14 @@ static int visstrim_m10_sdhc1_init(struct device *dev, { int ret; - ret = request_irq(SDHC1_IRQ, detect_irq, IRQF_TRIGGER_FALLING, - "mmc-detect", data); + ret = request_irq(gpio_to_irq(SDHC1_IRQ_GPIO), detect_irq, + IRQF_TRIGGER_FALLING, "mmc-detect", data); return ret; } static void visstrim_m10_sdhc1_exit(struct device *dev, void *data) { - free_irq(SDHC1_IRQ, data); + free_irq(gpio_to_irq(SDHC1_IRQ_GPIO), data); } static const struct imxmmc_platform_data visstrim_m10_sdhc_pdata __initconst = { diff --git a/arch/arm/mach-imx/mach-imx27ipcam.c b/arch/arm/mach-imx/mach-imx27ipcam.c index c9d350c5dcc83a590ea36774887eb7fd8461e72b..7381387a890558909ae69b3fd2fbeb621118e61c 100644 --- a/arch/arm/mach-imx/mach-imx27ipcam.c +++ b/arch/arm/mach-imx/mach-imx27ipcam.c @@ -57,7 +57,7 @@ static void __init mx27ipcam_init(void) imx27_add_imx_uart0(NULL); imx27_add_fec(NULL); - imx27_add_imx2_wdt(NULL); + imx27_add_imx2_wdt(); } static void __init mx27ipcam_timer_init(void) diff --git a/arch/arm/mach-imx/mach-imx6q.c b/arch/arm/mach-imx/mach-imx6q.c index b47e98b7d539fc9bce4cd4f0060004f086d528c4..5ec0608f2a764a9be584ea1bebbe1339f981a259 100644 --- a/arch/arm/mach-imx/mach-imx6q.c +++ b/arch/arm/mach-imx/mach-imx6q.c @@ -12,11 +12,12 @@ #include #include +#include #include +#include #include #include #include -#include #include #include #include @@ -24,6 +25,8 @@ #include #include #include +#include +#include #include #include #include @@ -31,8 +34,10 @@ #include #include #include +#include #include + void imx6q_restart(char mode, const char *cmd) { struct device_node *np; @@ -113,6 +118,45 @@ static void __init imx6q_sabrelite_init(void) imx6q_sabrelite_cko1_setup(); } +static void __init imx6q_usb_init(void) +{ + struct device_node *np; + struct platform_device *pdev = NULL; + struct anatop *adata = NULL; + + np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-anatop"); + if (np) + pdev = of_find_device_by_node(np); + if (pdev) + adata = platform_get_drvdata(pdev); + if (!adata) { + if (np) + of_node_put(np); + return; + } + +#define HW_ANADIG_USB1_CHRG_DETECT 0x000001b0 +#define HW_ANADIG_USB2_CHRG_DETECT 0x00000210 + +#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x00100000 +#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x00080000 + + /* + * The external charger detector needs to be disabled, + * or the signal at DP will be poor + */ + anatop_write_reg(adata, HW_ANADIG_USB1_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B + | BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B, + ~0); + anatop_write_reg(adata, HW_ANADIG_USB2_CHRG_DETECT, + BM_ANADIG_USB_CHRG_DETECT_EN_B | + BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B, + ~0); + + of_node_put(np); +} + static void __init imx6q_init_machine(void) { /* @@ -127,6 +171,20 @@ static void __init imx6q_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); imx6q_pm_init(); + imx6q_usb_init(); +} + +static struct cpuidle_driver imx6q_cpuidle_driver = { + .name = "imx6q_cpuidle", + .owner = THIS_MODULE, + .en_core_tk_irqen = 1, + .states[0] = ARM_CPUIDLE_WFI_STATE, + .state_count = 1, +}; + +static void __init imx6q_init_late(void) +{ + imx_cpuidle_init(&imx6q_cpuidle_driver); } static void __init imx6q_map_io(void) @@ -136,21 +194,8 @@ static void __init imx6q_map_io(void) imx6q_clock_map_io(); } -static int __init imx6q_gpio_add_irq_domain(struct device_node *np, - struct device_node *interrupt_parent) -{ - static int gpio_irq_base = MXC_GPIO_IRQ_START + ARCH_NR_GPIOS; - - gpio_irq_base -= 32; - irq_domain_add_legacy(np, 32, gpio_irq_base, 0, &irq_domain_simple_ops, - NULL); - - return 0; -} - static const struct of_device_id imx6q_irq_match[] __initconst = { { .compatible = "arm,cortex-a9-gic", .data = gic_of_init, }, - { .compatible = "fsl,imx6q-gpio", .data = imx6q_gpio_add_irq_domain, }, { /* sentinel */ } }; @@ -186,6 +231,7 @@ DT_MACHINE_START(IMX6Q, "Freescale i.MX6 Quad (Device Tree)") .handle_irq = imx6q_handle_irq, .timer = &imx6q_timer, .init_machine = imx6q_init_machine, + .init_late = imx6q_init_late, .dt_compat = imx6q_dt_compat, .restart = imx6q_restart, MACHINE_END diff --git a/arch/arm/mach-imx/mach-kzm_arm11_01.c b/arch/arm/mach-imx/mach-kzm_arm11_01.c index 15a26e90826032d987775a16223e5e49e023b864..5d08533ab2c77d50109c670dc071063c9c0da34c 100644 --- a/arch/arm/mach-imx/mach-kzm_arm11_01.c +++ b/arch/arm/mach-imx/mach-kzm_arm11_01.c @@ -73,7 +73,7 @@ static struct plat_serial8250_port serial_platform_data[] = { { .membase = KZM_ARM11_IO_ADDRESS(KZM_ARM11_16550), .mapbase = KZM_ARM11_16550, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), + /* irq number is run-time assigned */ .irqflags = IRQ_TYPE_EDGE_RISING, .uartclk = 14745600, .regshift = 0, @@ -91,8 +91,7 @@ static struct resource serial8250_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_1), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ, }, }; @@ -125,6 +124,13 @@ static int __init kzm_init_ext_uart(void) tmp |= 0x2; __raw_writeb(tmp, KZM_ARM11_IO_ADDRESS(KZM_ARM11_CTL1)); + serial_platform_data[0].irq = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + serial8250_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + serial8250_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_1)); + return platform_device_register(&serial_device); } #else @@ -152,8 +158,7 @@ static struct resource kzm_smsc9118_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_2), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, }; @@ -184,6 +189,11 @@ static int __init kzm_init_smsc9118(void) regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + kzm_smsc9118_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); + kzm_smsc9118_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_2)); + return platform_device_register(&kzm_smsc9118_device); } #else diff --git a/arch/arm/mach-imx/mach-mx1ads.c b/arch/arm/mach-imx/mach-mx1ads.c index 7274e7928136a67d366175329830d4146fb7d08b..667f359a2e8b037e8d6a08933cf20435195e849d 100644 --- a/arch/arm/mach-imx/mach-mx1ads.c +++ b/arch/arm/mach-imx/mach-mx1ads.c @@ -26,7 +26,6 @@ #include #include #include -#include #include "devices-imx1.h" diff --git a/arch/arm/mach-imx/mach-mx21ads.c b/arch/arm/mach-imx/mach-mx21ads.c index 3e7401fca76c7e18860261a7541449e3c75b5c9d..ed22e3fe6ec888d08840d9b6cbc839c9ccfdf4d6 100644 --- a/arch/arm/mach-imx/mach-mx21ads.c +++ b/arch/arm/mach-imx/mach-mx21ads.c @@ -38,7 +38,7 @@ (MX21ADS_MMIO_BASE_ADDR + (offset)) #define MX21ADS_CS8900A_MMIO_SIZE 0x200000 -#define MX21ADS_CS8900A_IRQ IRQ_GPIOE(11) +#define MX21ADS_CS8900A_IRQ_GPIO IMX_GPIO_NR(5, 11) #define MX21ADS_ST16C255_IOBASE_REG MX21ADS_REG_ADDR(0x200000) #define MX21ADS_VERSION_REG MX21ADS_REG_ADDR(0x400000) #define MX21ADS_IO_REG MX21ADS_REG_ADDR(0x800000) @@ -159,9 +159,10 @@ static struct platform_device mx21ads_nor_mtd_device = { .resource = &mx21ads_flash_resource, }; -static const struct resource mx21ads_cs8900_resources[] __initconst = { +static struct resource mx21ads_cs8900_resources[] __initdata = { DEFINE_RES_MEM(MX21_CS1_BASE_ADDR, MX21ADS_CS8900A_MMIO_SIZE), - DEFINE_RES_IRQ(MX21ADS_CS8900A_IRQ), + /* irq number is run-time assigned */ + DEFINE_RES_IRQ(-1), }; static const struct platform_device_info mx21ads_cs8900_devinfo __initconst = { @@ -241,13 +242,13 @@ static int mx21ads_sdhc_get_ro(struct device *dev) static int mx21ads_sdhc_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_GPIOD(25), detect_irq, + return request_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), detect_irq, IRQF_TRIGGER_FALLING, "mmc-detect", data); } static void mx21ads_sdhc_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOD(25), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(4, 25)), data); } static const struct imxmmc_platform_data mx21ads_sdhc_pdata __initconst = { @@ -304,6 +305,11 @@ static void __init mx21ads_board_init(void) imx21_add_mxc_nand(&mx21ads_nand_board_info); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); + + mx21ads_cs8900_resources[1].start = + gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); + mx21ads_cs8900_resources[1].end = + gpio_to_irq(MX21ADS_CS8900A_IRQ_GPIO); platform_device_register_full(&mx21ads_cs8900_devinfo); } diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c index f26734298aa629d52c94faea8f7e7ea2a0694230..ce247fd1269ae094a57dc95065ba2256effb7e65 100644 --- a/arch/arm/mach-imx/mach-mx25_3ds.c +++ b/arch/arm/mach-imx/mach-mx25_3ds.c @@ -237,9 +237,9 @@ static void __init mx25pdk_init(void) imx25_add_fsl_usb2_udc(&otg_device_pdata); imx25_add_mxc_ehci_hs(&usbh2_pdata); imx25_add_mxc_nand(&mx25pdk_nand_board_info); - imx25_add_imxdi_rtc(NULL); + imx25_add_imxdi_rtc(); imx25_add_imx_fb(&mx25pdk_fb_pdata); - imx25_add_imx2_wdt(NULL); + imx25_add_imx2_wdt(); mx25pdk_fec_reset(); imx25_add_fec(&mx25_fec_pdata); diff --git a/arch/arm/mach-imx/mach-mx27_3ds.c b/arch/arm/mach-imx/mach-mx27_3ds.c index c6d385c522576f1052eeb474fc2d69a86faa7a0e..58c24c1a7ab70ac26e47db241e882800a2cf9cc5 100644 --- a/arch/arm/mach-imx/mach-mx27_3ds.c +++ b/arch/arm/mach-imx/mach-mx27_3ds.c @@ -40,7 +40,6 @@ #include #include #include -#include #include #include "devices-imx27.h" @@ -48,7 +47,6 @@ #define SD1_EN_GPIO IMX_GPIO_NR(2, 25) #define OTG_PHY_RESET_GPIO IMX_GPIO_NR(2, 23) #define SPI2_SS0 IMX_GPIO_NR(4, 21) -#define EXPIO_PARENT_INT gpio_to_irq(IMX_GPIO_NR(3, 28)) #define PMIC_INT IMX_GPIO_NR(3, 14) #define SPI1_SS0 IMX_GPIO_NR(4, 28) #define SD1_CD IMX_GPIO_NR(2, 26) @@ -241,18 +239,18 @@ static const struct fsl_usb2_platform_data otg_device_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init mx27_3ds_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", mx27_3ds_otg_mode); @@ -445,7 +443,7 @@ static struct spi_board_info mx27_3ds_spi_devs[] __initdata = { .bus_num = 1, .chip_select = 0, /* SS0 */ .platform_data = &mc13783_pdata, - .irq = IMX_GPIO_TO_IRQ(PMIC_INT), + /* irq number is run-time assigned */ .mode = SPI_CS_HIGH, }, { .modalias = "l4f00242t03", @@ -480,7 +478,7 @@ static void __init mx27pdk_init(void) imx27_add_fec(NULL); imx27_add_imx_keypad(&mx27_3ds_keymap_data); imx27_add_mxc_mmc(0, &sdhc1_pdata); - imx27_add_imx2_wdt(NULL); + imx27_add_imx2_wdt(); otg_phy_init(); if (otg_mode_host) { @@ -496,10 +494,11 @@ static void __init mx27pdk_init(void) imx27_add_spi_imx1(&spi2_pdata); imx27_add_spi_imx0(&spi1_pdata); + mx27_3ds_spi_devs[0].irq = gpio_to_irq(PMIC_INT); spi_register_board_info(mx27_3ds_spi_devs, ARRAY_SIZE(mx27_3ds_spi_devs)); - if (mxc_expio_init(MX27_CS5_BASE_ADDR, EXPIO_PARENT_INT)) + if (mxc_expio_init(MX27_CS5_BASE_ADDR, IMX_GPIO_NR(3, 28))) pr_warn("Init of the debugboard failed, all devices on the debugboard are unusable.\n"); imx27_add_imx_i2c(0, &mx27_3ds_i2c0_data); platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-imx/mach-mx27ads.c b/arch/arm/mach-imx/mach-mx27ads.c index 0228d2e07fe05ed641b6f24988b0730b9eae86ed..7dc59bac0e55cf8e30e1151064622a53cf172205 100644 --- a/arch/arm/mach-imx/mach-mx27ads.c +++ b/arch/arm/mach-imx/mach-mx27ads.c @@ -246,25 +246,25 @@ static const struct imx_fb_platform_data mx27ads_fb_data __initconst = { static int mx27ads_sdhc1_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_GPIOE(21), detect_irq, IRQF_TRIGGER_RISING, - "sdhc1-card-detect", data); + return request_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), detect_irq, + IRQF_TRIGGER_RISING, "sdhc1-card-detect", data); } static int mx27ads_sdhc2_init(struct device *dev, irq_handler_t detect_irq, void *data) { - return request_irq(IRQ_GPIOB(7), detect_irq, IRQF_TRIGGER_RISING, - "sdhc2-card-detect", data); + return request_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), detect_irq, + IRQF_TRIGGER_RISING, "sdhc2-card-detect", data); } static void mx27ads_sdhc1_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOE(21), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(5, 21)), data); } static void mx27ads_sdhc2_exit(struct device *dev, void *data) { - free_irq(IRQ_GPIOB(7), data); + free_irq(gpio_to_irq(IMX_GPIO_NR(2, 7)), data); } static const struct imxmmc_platform_data sdhc1_pdata __initconst = { @@ -310,7 +310,7 @@ static void __init mx27ads_board_init(void) imx27_add_fec(NULL); platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices)); - imx27_add_mxc_w1(NULL); + imx27_add_mxc_w1(); } static void __init mx27ads_timer_init(void) diff --git a/arch/arm/mach-imx/mach-mx31_3ds.c b/arch/arm/mach-imx/mach-mx31_3ds.c index 4eafdf275ea28864d6dacf6667be7221cf2a9a22..8915f937b7d54e00735bf2de1dd4c03730d2d5f9 100644 --- a/arch/arm/mach-imx/mach-mx31_3ds.c +++ b/arch/arm/mach-imx/mach-mx31_3ds.c @@ -44,9 +44,6 @@ #include "devices-imx31.h" -/* CPLD IRQ line for external uart, external ethernet etc */ -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_1) - static int mx31_3ds_pins[] = { /* UART1 */ MX31_PIN_CTS1__CTS1, @@ -277,10 +274,6 @@ static const struct fb_videomode fb_modedb[] = { }, }; -static struct ipu_platform_data mx3_ipu_data = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct mx3fb_platform_data mx3fb_pdata __initdata = { .name = "Epson-VGA", .mode = fb_modedb, @@ -317,7 +310,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev, return ret; } - ret = request_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), + ret = request_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), detect_irq, IRQF_DISABLED | IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, "sdhc1-detect", data); @@ -336,7 +329,7 @@ static int mx31_3ds_sdhc1_init(struct device *dev, static void mx31_3ds_sdhc1_exit(struct device *dev, void *data) { - free_irq(IOMUX_TO_IRQ(MX31_PIN_GPIO3_1), data); + free_irq(gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO3_1)), data); gpio_free_array(mx31_3ds_sdhc1_gpios, ARRAY_SIZE(mx31_3ds_sdhc1_gpios)); } @@ -539,7 +532,7 @@ static struct spi_board_info mx31_3ds_spi_devs[] __initdata = { .bus_num = 1, .chip_select = 1, /* SS2 */ .platform_data = &mc13783_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ .mode = SPI_CS_HIGH, }, { .modalias = "l4f00242t03", @@ -671,18 +664,18 @@ static const struct fsl_usb2_platform_data usbotg_pdata __initconst = { .phy_mode = FSL_USB2_PHY_ULPI, }; -static int otg_mode_host; +static bool otg_mode_host __initdata; static int __init mx31_3ds_otg_mode(char *options) { if (!strcmp(options, "host")) - otg_mode_host = 1; + otg_mode_host = true; else if (!strcmp(options, "device")) - otg_mode_host = 0; + otg_mode_host = false; else pr_info("otg_mode neither \"host\" nor \"device\". " "Defaulting to device\n"); - return 0; + return 1; } __setup("otg_mode=", mx31_3ds_otg_mode); @@ -714,6 +707,7 @@ static void __init mx31_3ds_init(void) imx31_add_mxc_nand(&mx31_3ds_nand_board_info); imx31_add_spi_imx1(&spi1_pdata); + mx31_3ds_spi_devs[0].irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(mx31_3ds_spi_devs, ARRAY_SIZE(mx31_3ds_spi_devs)); @@ -736,15 +730,15 @@ static void __init mx31_3ds_init(void) if (!otg_mode_host) imx31_add_fsl_usb2_udc(&usbotg_pdata); - if (mxc_expio_init(MX31_CS5_BASE_ADDR, EXPIO_PARENT_INT)) + if (mxc_expio_init(MX31_CS5_BASE_ADDR, IOMUX_TO_GPIO(MX31_PIN_GPIO1_1))) printk(KERN_WARNING "Init of the debug board failed, all " "devices on the debug board are unusable.\n"); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); imx31_add_imx_i2c0(&mx31_3ds_i2c0_data); imx31_add_mxc_mmc(0, &sdhc1_pdata); imx31_add_spi_imx0(&spi0_pdata); - imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_ipu_core(); imx31_add_mx3_sdc_fb(&mx3fb_pdata); /* CSI */ diff --git a/arch/arm/mach-imx/mach-mx31ads.c b/arch/arm/mach-imx/mach-mx31ads.c index 4518e544822731c19b941927067265184c59ff0b..d37f4809c5565abacb594f7693991ce726412092 100644 --- a/arch/arm/mach-imx/mach-mx31ads.c +++ b/arch/arm/mach-imx/mach-mx31ads.c @@ -21,6 +21,7 @@ #include #include #include +#include #include #include @@ -62,20 +63,18 @@ #define PBC_INTSTATUS_REG (PBC_INTSTATUS + PBC_BASE_ADDRESS) #define PBC_INTMASK_SET_REG (PBC_INTMASK_SET + PBC_BASE_ADDRESS) #define PBC_INTMASK_CLEAR_REG (PBC_INTMASK_CLEAR + PBC_BASE_ADDRESS) -#define EXPIO_PARENT_INT IOMUX_TO_IRQ(MX31_PIN_GPIO1_4) -#define MXC_EXP_IO_BASE MXC_BOARD_IRQ_START -#define MXC_IRQ_TO_EXPIO(irq) ((irq) - MXC_EXP_IO_BASE) - -#define EXPIO_INT_XUART_INTA (MXC_EXP_IO_BASE + 10) -#define EXPIO_INT_XUART_INTB (MXC_EXP_IO_BASE + 11) +#define EXPIO_INT_XUART_INTA 10 +#define EXPIO_INT_XUART_INTB 11 #define MXC_MAX_EXP_IO_LINES 16 /* CS8900 */ -#define EXPIO_INT_ENET_INT (MXC_EXP_IO_BASE + 8) +#define EXPIO_INT_ENET_INT 8 #define CS4_CS8900_MMIO_START 0x20000 +static struct irq_domain *domain; + /* * The serial port definition structure. */ @@ -83,7 +82,6 @@ static struct plat_serial8250_port serial_platform_data[] = { { .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTA), .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTA), - .irq = EXPIO_INT_XUART_INTA, .uartclk = 14745600, .regshift = 0, .iotype = UPIO_MEM, @@ -91,7 +89,6 @@ static struct plat_serial8250_port serial_platform_data[] = { }, { .membase = (void *)(PBC_BASE_ADDRESS + PBC_SC16C652_UARTB), .mapbase = (unsigned long)(MX31_CS4_BASE_ADDR + PBC_SC16C652_UARTB), - .irq = EXPIO_INT_XUART_INTB, .uartclk = 14745600, .regshift = 0, .iotype = UPIO_MEM, @@ -108,9 +105,9 @@ static struct platform_device serial_device = { }, }; -static const struct resource mx31ads_cs8900_resources[] __initconst = { +static struct resource mx31ads_cs8900_resources[] __initdata = { DEFINE_RES_MEM(MX31_CS4_BASE_ADDR + CS4_CS8900_MMIO_START, SZ_64K), - DEFINE_RES_IRQ(EXPIO_INT_ENET_INT), + DEFINE_RES_IRQ(-1), }; static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = { @@ -122,11 +119,19 @@ static const struct platform_device_info mx31ads_cs8900_devinfo __initconst = { static int __init mxc_init_extuart(void) { + serial_platform_data[0].irq = irq_find_mapping(domain, + EXPIO_INT_XUART_INTA); + serial_platform_data[1].irq = irq_find_mapping(domain, + EXPIO_INT_XUART_INTB); return platform_device_register(&serial_device); } static void __init mxc_init_ext_ethernet(void) { + mx31ads_cs8900_resources[1].start = + irq_find_mapping(domain, EXPIO_INT_ENET_INT); + mx31ads_cs8900_resources[1].end = + irq_find_mapping(domain, EXPIO_INT_ENET_INT); platform_device_register_full( (struct platform_device_info *)&mx31ads_cs8900_devinfo); } @@ -157,12 +162,12 @@ static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc) imr_val = __raw_readw(PBC_INTMASK_SET_REG); int_valid = __raw_readw(PBC_INTSTATUS_REG) & imr_val; - expio_irq = MXC_EXP_IO_BASE; + expio_irq = 0; for (; int_valid != 0; int_valid >>= 1, expio_irq++) { if ((int_valid & 1) == 0) continue; - generic_handle_irq(expio_irq); + generic_handle_irq(irq_find_mapping(domain, expio_irq)); } } @@ -172,7 +177,7 @@ static void mx31ads_expio_irq_handler(u32 irq, struct irq_desc *desc) */ static void expio_mask_irq(struct irq_data *d) { - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; /* mask the interrupt */ __raw_writew(1 << expio, PBC_INTMASK_CLEAR_REG); __raw_readw(PBC_INTMASK_CLEAR_REG); @@ -184,7 +189,7 @@ static void expio_mask_irq(struct irq_data *d) */ static void expio_ack_irq(struct irq_data *d) { - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; /* clear the interrupt status */ __raw_writew(1 << expio, PBC_INTSTATUS_REG); } @@ -195,7 +200,7 @@ static void expio_ack_irq(struct irq_data *d) */ static void expio_unmask_irq(struct irq_data *d) { - u32 expio = MXC_IRQ_TO_EXPIO(d->irq); + u32 expio = d->hwirq; /* unmask the interrupt */ __raw_writew(1 << expio, PBC_INTMASK_SET_REG); } @@ -209,7 +214,8 @@ static struct irq_chip expio_irq_chip = { static void __init mx31ads_init_expio(void) { - int i; + int irq_base; + int i, irq; printk(KERN_INFO "MX31ADS EXPIO(CPLD) hardware\n"); @@ -221,13 +227,21 @@ static void __init mx31ads_init_expio(void) /* disable the interrupt and clear the status */ __raw_writew(0xFFFF, PBC_INTMASK_CLEAR_REG); __raw_writew(0xFFFF, PBC_INTSTATUS_REG); - for (i = MXC_EXP_IO_BASE; i < (MXC_EXP_IO_BASE + MXC_MAX_EXP_IO_LINES); - i++) { + + irq_base = irq_alloc_descs(-1, 0, MXC_MAX_EXP_IO_LINES, numa_node_id()); + WARN_ON(irq_base < 0); + + domain = irq_domain_add_legacy(NULL, MXC_MAX_EXP_IO_LINES, irq_base, 0, + &irq_domain_simple_ops, NULL); + WARN_ON(!domain); + + for (i = irq_base; i < irq_base + MXC_MAX_EXP_IO_LINES; i++) { irq_set_chip_and_handler(i, &expio_irq_chip, handle_level_irq); set_irq_flags(i, IRQF_VALID); } - irq_set_irq_type(EXPIO_PARENT_INT, IRQ_TYPE_LEVEL_HIGH); - irq_set_chained_handler(EXPIO_PARENT_INT, mx31ads_expio_irq_handler); + irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_4)); + irq_set_irq_type(irq, IRQ_TYPE_LEVEL_HIGH); + irq_set_chained_handler(irq, mx31ads_expio_irq_handler); } #ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 @@ -479,7 +493,6 @@ static int mx31_wm8350_init(struct wm8350 *wm8350) static struct wm8350_platform_data __initdata mx31_wm8350_pdata = { .init = mx31_wm8350_init, - .irq_base = MXC_BOARD_IRQ_START + MXC_MAX_EXP_IO_LINES, }; #endif @@ -488,13 +501,17 @@ static struct i2c_board_info __initdata mx31ads_i2c1_devices[] = { { I2C_BOARD_INFO("wm8350", 0x1a), .platform_data = &mx31_wm8350_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ }, #endif }; static void __init mxc_init_i2c(void) { +#ifdef CONFIG_MACH_MX31ADS_WM1133_EV1 + mx31ads_i2c1_devices[0].irq = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); +#endif i2c_register_board_info(1, mx31ads_i2c1_devices, ARRAY_SIZE(mx31ads_i2c1_devices)); diff --git a/arch/arm/mach-imx/mach-mx31lilly.c b/arch/arm/mach-imx/mach-mx31lilly.c index 83714b0cc290a25202e1e5122f3490ea426339c7..34b9bf075daff783eb332ab652347ac1e159b84f 100644 --- a/arch/arm/mach-imx/mach-mx31lilly.c +++ b/arch/arm/mach-imx/mach-mx31lilly.c @@ -65,8 +65,7 @@ static struct resource smsc91x_resources[] = { .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), - .end = IOMUX_TO_IRQ(MX31_PIN_GPIO1_0), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -233,7 +232,7 @@ static struct spi_board_info mc13783_dev __initdata = { .bus_num = 1, .chip_select = 0, .platform_data = &mc13783_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ }; static struct platform_device *devices[] __initdata = { @@ -285,10 +284,15 @@ static void __init mx31lilly_board_init(void) imx31_add_spi_imx0(&spi0_pdata); imx31_add_spi_imx1(&spi1_pdata); + mc13783_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(&mc13783_dev, 1); regulator_register_fixed(0, dummy_supplies, ARRAY_SIZE(dummy_supplies)); + smsc91x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); + smsc91x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_0)); platform_add_devices(devices, ARRAY_SIZE(devices)); /* USB */ diff --git a/arch/arm/mach-imx/mach-mx31lite.c b/arch/arm/mach-imx/mach-mx31lite.c index 686c605879800614656aeeac2d60515a4c2d3536..c8785b39eaed20432166db3a0d24b49a4f416bc0 100644 --- a/arch/arm/mach-imx/mach-mx31lite.c +++ b/arch/arm/mach-imx/mach-mx31lite.c @@ -43,7 +43,6 @@ #include #include #include -#include #include #include "devices-imx31.h" @@ -83,8 +82,7 @@ static struct resource smsc911x_resources[] = { .end = MX31_CS4_BASE_ADDR + 0x100, .flags = IORESOURCE_MEM, }, { - .start = IOMUX_TO_IRQ(MX31_PIN_SFS6), - .end = IOMUX_TO_IRQ(MX31_PIN_SFS6), + /* irq number is run-time assigned */ .flags = IORESOURCE_IRQ, }, }; @@ -124,7 +122,7 @@ static struct spi_board_info mc13783_spi_dev __initdata = { .bus_num = 1, .chip_select = 0, .platform_data = &mc13783_pdata, - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ }; /* @@ -258,6 +256,7 @@ static void __init mx31lite_init(void) imx31_add_mxc_nand(&mx31lite_nand_board_info); imx31_add_spi_imx1(&spi1_pdata); + mc13783_spi_dev.irq = gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(&mc13783_spi_dev, 1); /* USB */ @@ -274,6 +273,10 @@ static void __init mx31lite_init(void) pr_warning("could not get LAN irq gpio\n"); else { gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_SFS6)); + smsc911x_resources[1].start = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6)); + smsc911x_resources[1].end = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_SFS6)); platform_device_register(&smsc911x_device); } } diff --git a/arch/arm/mach-imx/mach-mx31moboard.c b/arch/arm/mach-imx/mach-mx31moboard.c index 016791f038b0a75e918077cecf4ecaff5452cabf..d46290b288eda7a6d6b0f26d5ed3f89c8f9195b6 100644 --- a/arch/arm/mach-imx/mach-mx31moboard.c +++ b/arch/arm/mach-imx/mach-mx31moboard.c @@ -303,7 +303,7 @@ static struct imx_ssi_platform_data moboard_ssi_pdata = { static struct spi_board_info moboard_spi_board_info[] __initdata = { { .modalias = "mc13783", - .irq = IOMUX_TO_IRQ(MX31_PIN_GPIO1_3), + /* irq number is run-time assigned */ .max_speed_hz = 300000, .bus_num = 1, .chip_select = 0, @@ -473,10 +473,6 @@ static const struct gpio_led_platform_data mx31moboard_led_pdata __initconst = { .leds = mx31moboard_leds, }; -static const struct ipu_platform_data mx3_ipu_data __initconst = { - .irq_base = MXC_IPU_IRQ_START, -}; - static struct platform_device *devices[] __initdata = { &mx31moboard_flash, }; @@ -494,7 +490,7 @@ static int __init mx31moboard_init_cam(void) int dma, ret = -ENOMEM; struct platform_device *pdev; - imx31_add_ipu_core(&mx3_ipu_data); + imx31_add_ipu_core(); pdev = imx31_alloc_mx3_camera(&camera_pdata); if (IS_ERR(pdev)) @@ -544,7 +540,7 @@ static void __init mx31moboard_init(void) platform_add_devices(devices, ARRAY_SIZE(devices)); gpio_led_register_device(-1, &mx31moboard_led_pdata); - imx31_add_imx2_wdt(NULL); + imx31_add_imx2_wdt(); imx31_add_imx_uart0(&uart0_pdata); imx31_add_imx_uart4(&uart4_pdata); @@ -557,6 +553,8 @@ static void __init mx31moboard_init(void) gpio_request(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3), "pmic-irq"); gpio_direction_input(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); + moboard_spi_board_info[0].irq = + gpio_to_irq(IOMUX_TO_GPIO(MX31_PIN_GPIO1_3)); spi_register_board_info(moboard_spi_board_info, ARRAY_SIZE(moboard_spi_board_info)); diff --git a/arch/arm/mach-imx/mach-mx35_3ds.c b/arch/arm/mach-imx/mach-mx35_3ds.c index 28aa19476de73dc47ea40eaec323e71e1623b7e7..504983c68aa8309bc8971ddbb18d8e35fb270505 100644 --- a/arch/arm/mach-imx/mach-mx35_3ds.c +++ b/arch/arm/mach-imx/mach-mx35_3ds.c @@ -46,7 +46,6 @@ #include #include #include -#include #include #include