diff --git a/.gitignore b/.gitignore index f4c0b091dcf4e6413cbe70f0ec345a5894e0885e..e213b27f3921a88768201638d6d358f0f0c80419 100644 --- a/.gitignore +++ b/.gitignore @@ -34,6 +34,7 @@ *.gcno modules.builtin Module.symvers +*.dwo # # Top-level generic files diff --git a/CREDITS b/CREDITS index a80b66718f66550abee52ea2e13e1058917325c4..bb6278884f894878dc49e1c6722a0cbe3e89e82e 100644 --- a/CREDITS +++ b/CREDITS @@ -1381,6 +1381,9 @@ S: 17 rue Danton S: F - 94270 Le Kremlin-Bicêtre S: France +N: Jack Hammer +D: IBM ServeRAID RAID (ips) driver maintenance + N: Greg Hankins E: gregh@cc.gatech.edu D: fixed keyboard driver to separate LED and locking status @@ -1691,6 +1694,10 @@ S: Reading S: RG6 2NU S: United Kingdom +N: Dave Jeffery +E: dhjeffery@gmail.com +D: SCSI hacks and IBM ServeRAID RAID driver maintenance + N: Jakub Jelinek E: jakub@redhat.com W: http://sunsite.mff.cuni.cz/~jj diff --git a/Documentation/ABI/stable/sysfs-bus-usb b/Documentation/ABI/stable/sysfs-bus-usb index a6b68572474062bf04329a434cb27bbf825d19b8..e2bc700a6f9ccbc666c4183b6cc6b4ef2ac5210f 100644 --- a/Documentation/ABI/stable/sysfs-bus-usb +++ b/Documentation/ABI/stable/sysfs-bus-usb @@ -3,13 +3,13 @@ Date: May 2007 KernelVersion: 2.6.23 Contact: Alan Stern Description: - If CONFIG_USB_PERSIST is set, then each USB device directory - will contain a file named power/persist. The file holds a - boolean value (0 or 1) indicating whether or not the - "USB-Persist" facility is enabled for the device. Since the - facility is inherently dangerous, it is disabled by default - for all devices except hubs. For more information, see - Documentation/usb/persist.txt. + USB device directories can contain a file named power/persist. + The file holds a boolean value (0 or 1) indicating whether or + not the "USB-Persist" facility is enabled for the device. For + hubs this facility is always enabled and their device + directories will not contain this file. + + For more information, see Documentation/usb/persist.txt. What: /sys/bus/usb/devices/.../power/autosuspend Date: March 2007 diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index 4c3efe4348060a10d1282059967b3725f5f41e34..d0d0c578324c7437324d5a23f1536cc1f0f2a08d 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -26,6 +26,7 @@ Description: option: [[appraise_type=]] [permit_directio] base: func:= [BPRM_CHECK][MMAP_CHECK][FILE_CHECK][MODULE_CHECK] + [FIRMWARE_CHECK] mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC] fsmagic:= hex value fsuuid:= file system UUID (e.g 8bcbe394-4f13-4144-be8e-5aa9ea2ce2f6) @@ -57,7 +58,8 @@ Description: measure func=BPRM_CHECK measure func=FILE_MMAP mask=MAY_EXEC measure func=FILE_CHECK mask=MAY_READ uid=0 - measure func=MODULE_CHECK uid=0 + measure func=MODULE_CHECK + measure func=FIRMWARE_CHECK appraise fowner=0 The default policy measures all executables in bprm_check, diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index a9757dcf2e813a50720dfc1a4f5094be596f9eaa..d760b0224ef7b99f30632f07bf7a0986c6ce92e5 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -260,6 +260,10 @@ What: /sys/bus/iio/devices/iio:deviceX/in_magn_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_x_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_y_scale What: /sys/bus/iio/devices/iio:deviceX/in_magn_z_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_scale +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_scale What: /sys/bus/iio/devices/iio:deviceX/in_pressureY_scale What: /sys/bus/iio/devices/iio:deviceX/in_pressure_scale KernelVersion: 2.6.35 @@ -447,6 +451,14 @@ What: /sys/.../iio:deviceX/events/in_magn_y_thresh_rising_en What: /sys/.../iio:deviceX/events/in_magn_y_thresh_falling_en What: /sys/.../iio:deviceX/events/in_magn_z_thresh_rising_en What: /sys/.../iio:deviceX/events/in_magn_z_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_thresh_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_rising_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_thresh_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_thresh_rising_en @@ -492,6 +504,14 @@ What: /sys/.../iio:deviceX/events/in_magn_y_roc_rising_en What: /sys/.../iio:deviceX/events/in_magn_y_roc_falling_en What: /sys/.../iio:deviceX/events/in_magn_z_roc_rising_en What: /sys/.../iio:deviceX/events/in_magn_z_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_magnetic_tilt_comp_roc_falling_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_rising_en +What: /sys/.../iio:deviceX/events/in_rot_from_north_true_tilt_comp_roc_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_rising_en What: /sys/.../iio:deviceX/events/in_voltageY_supply_roc_falling_en What: /sys/.../iio:deviceX/events/in_voltageY_roc_rising_en @@ -538,6 +558,14 @@ What: /sys/.../events/in_magn_y_raw_thresh_rising_value What: /sys/.../events/in_magn_y_raw_thresh_falling_value What: /sys/.../events/in_magn_z_raw_thresh_rising_value What: /sys/.../events/in_magn_z_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_true_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_true_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_thresh_falling_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_rising_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_thresh_falling_value What: /sys/.../events/in_voltageY_supply_raw_thresh_rising_value What: /sys/.../events/in_voltageY_supply_raw_thresh_falling_value What: /sys/.../events/in_voltageY_raw_thresh_rising_value @@ -588,6 +616,18 @@ What: /sys/.../events/in_magn_y_thresh_either_hysteresis What: /sys/.../events/in_magn_z_thresh_rising_hysteresis What: /sys/.../events/in_magn_z_thresh_falling_hysteresis What: /sys/.../events/in_magn_z_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_true_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_true_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_true_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_either_hysteresis +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_hysteresis +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_hysteresis +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_either_hysteresis What: /sys/.../events/in_voltageY_thresh_rising_hysteresis What: /sys/.../events/in_voltageY_thresh_falling_hysteresis What: /sys/.../events/in_voltageY_thresh_either_hysteresis @@ -635,6 +675,14 @@ What: /sys/.../events/in_magn_y_raw_roc_rising_value What: /sys/.../events/in_magn_y_raw_roc_falling_value What: /sys/.../events/in_magn_z_raw_roc_rising_value What: /sys/.../events/in_magn_z_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_true_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_true_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_raw_roc_falling_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_rising_value +What: /sys/.../events/in_rot_from_north_true_tilt_comp_raw_roc_falling_value What: /sys/.../events/in_voltageY_supply_raw_roc_rising_value What: /sys/.../events/in_voltageY_supply_raw_roc_falling_value What: /sys/.../events/in_voltageY_raw_roc_rising_value @@ -690,6 +738,22 @@ What: /sys/.../events/in_magn_z_thresh_rising_period What: /sys/.../events/in_magn_z_thresh_falling_period What: /sys/.../events/in_magn_z_roc_rising_period What: /sys/.../events/in_magn_z_roc_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_thresh_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_thresh_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_roc_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_roc_falling_period +What: /sys/.../events/in_rot_from_north_true_thresh_rising_period +What: /sys/.../events/in_rot_from_north_true_thresh_falling_period +What: /sys/.../events/in_rot_from_north_true_roc_rising_period +What: /sys/.../events/in_rot_from_north_true_roc_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_thresh_falling_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_rising_period +What: /sys/.../events/in_rot_from_north_magnetic_tilt_comp_roc_falling_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_rising_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_thresh_falling_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_rising_period +What: /sys/.../events/in_rot_from_north_true_tilt_comp_roc_falling_period What: /sys/.../events/in_voltageY_supply_thresh_rising_period What: /sys/.../events/in_voltageY_supply_thresh_falling_period What: /sys/.../events/in_voltageY_supply_roc_rising_period @@ -787,6 +851,10 @@ What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_en What: /sys/.../iio:deviceX/scan_elements/in_magn_x_en What: /sys/.../iio:deviceX/scan_elements/in_magn_y_en What: /sys/.../iio:deviceX/scan_elements/in_magn_z_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_en +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_en What: /sys/.../iio:deviceX/scan_elements/in_timestamp_en What: /sys/.../iio:deviceX/scan_elements/in_voltageY_supply_en What: /sys/.../iio:deviceX/scan_elements/in_voltageY_en @@ -853,6 +921,10 @@ What: /sys/.../iio:deviceX/scan_elements/in_anglvel_z_index What: /sys/.../iio:deviceX/scan_elements/in_magn_x_index What: /sys/.../iio:deviceX/scan_elements/in_magn_y_index What: /sys/.../iio:deviceX/scan_elements/in_magn_z_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_magnetic_tilt_comp_index +What: /sys/.../iio:deviceX/scan_elements/in_rot_from_north_true_tilt_comp_index What: /sys/.../iio:deviceX/scan_elements/in_incli_x_index What: /sys/.../iio:deviceX/scan_elements/in_incli_y_index What: /sys/.../iio:deviceX/scan_elements/in_timestamp_index @@ -895,6 +967,19 @@ Description: on-chip EEPROM. After power-up or chip reset the device will automatically load the saved configuration. +What: /sys/.../iio:deviceX/in_proximity_raw +What: /sys/.../iio:deviceX/in_proximity_input +What: /sys/.../iio:deviceX/in_proximityY_raw +KernelVersion: 3.4 +Contact: linux-iio@vger.kernel.org +Description: + Proximity measurement indicating that some + object is near the sensor, usually be observing + reflectivity of infrared or ultrasound emitted. + Often these sensors are unit less and as such conversion + to SI units is not possible. Where it is, the units should + be meters. + What: /sys/.../iio:deviceX/in_illuminanceY_input What: /sys/.../iio:deviceX/in_illuminanceY_raw What: /sys/.../iio:deviceX/in_illuminanceY_mean_raw @@ -933,3 +1018,13 @@ Description: x y z w. Here x, y, and z component represents the axis about which a rotation will occur and w component represents the amount of rotation. + +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_tilt_comp_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_tilt_comp_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_magnetic_raw +What: /sys/bus/iio/devices/iio:deviceX/in_rot_from_north_true_raw +KernelVersion: 3.15 +Contact: linux-iio@vger.kernel.org +Description: + Raw value of rotation from true/magnetic north measured with + or without compensation from tilt sensors. diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-trigger-sysfs b/Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs similarity index 100% rename from drivers/staging/iio/Documentation/sysfs-bus-iio-trigger-sysfs rename to Documentation/ABI/testing/sysfs-bus-iio-trigger-sysfs diff --git a/Documentation/ABI/testing/sysfs-bus-platform b/Documentation/ABI/testing/sysfs-bus-platform new file mode 100644 index 0000000000000000000000000000000000000000..5172a6124b27f8c1e406a610c794611ee5998a90 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-platform @@ -0,0 +1,20 @@ +What: /sys/bus/platform/devices/.../driver_override +Date: April 2014 +Contact: Kim Phillips +Description: + This file allows the driver for a device to be specified which + will override standard OF, ACPI, ID table, and name matching. + When specified, only a driver with a name matching the value + written to driver_override will have an opportunity to bind + to the device. The override is specified by writing a string + to the driver_override file (echo vfio-platform > \ + driver_override) and may be cleared with an empty string + (echo > driver_override). This returns the device to standard + matching rules binding. Writing to driver_override does not + automatically unbind the device from its current driver or make + any attempt to automatically load the specified driver. If no + driver with a matching name is currently loaded in the kernel, + the device will not bind to any driver. This also allows + devices to opt-out of driver binding using a driver_override + name such as "none". Only a single driver may be specified in + the override, there is no support for parsing delimiters. diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd index 501adc2a9ec723841c5246b19875a9bc14471ada..2ddd680929d8f83dc2147592978b37a6e33dc9a5 100644 --- a/Documentation/ABI/testing/sysfs-bus-rbd +++ b/Documentation/ABI/testing/sysfs-bus-rbd @@ -94,5 +94,5 @@ current_snap parent - Information identifying the pool, image, and snapshot id for - the parent image in a layered rbd image (format 2 only). + Information identifying the chain of parent images in a layered rbd + image. Entries are separated by empty lines. diff --git a/Documentation/ABI/testing/sysfs-bus-usb-lvstest b/Documentation/ABI/testing/sysfs-bus-usb-lvstest new file mode 100644 index 0000000000000000000000000000000000000000..aae68fc2d842a50c01c34916ba9f5c790fdc729b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-usb-lvstest @@ -0,0 +1,47 @@ +Link Layer Validation Device is a standard device for testing of Super +Speed Link Layer tests. These nodes are available in sysfs only when lvs +driver is bound with root hub device. + +What: /sys/bus/usb/devices/.../get_dev_desc +Date: March 2014 +Contact: Pratyush Anand +Description: + Write to this node to issue "Get Device Descriptor" + for Link Layer Validation device. It is needed for TD.7.06. + +What: /sys/bus/usb/devices/.../u1_timeout +Date: March 2014 +Contact: Pratyush Anand +Description: + Set "U1 timeout" for the downstream port where Link Layer + Validation device is connected. Timeout value must be between 0 + and 127. It is needed for TD.7.18, TD.7.19, TD.7.20 and TD.7.21. + +What: /sys/bus/usb/devices/.../u2_timeout +Date: March 2014 +Contact: Pratyush Anand +Description: + Set "U2 timeout" for the downstream port where Link Layer + Validation device is connected. Timeout value must be between 0 + and 127. It is needed for TD.7.18, TD.7.19, TD.7.20 and TD.7.21. + +What: /sys/bus/usb/devices/.../hot_reset +Date: March 2014 +Contact: Pratyush Anand +Description: + Write to this node to issue "Reset" for Link Layer Validation + device. It is needed for TD.7.29, TD.7.31, TD.7.34 and TD.7.35. + +What: /sys/bus/usb/devices/.../u3_entry +Date: March 2014 +Contact: Pratyush Anand +Description: + Write to this node to issue "U3 entry" for Link Layer + Validation device. It is needed for TD.7.35 and TD.7.36. + +What: /sys/bus/usb/devices/.../u3_exit +Date: March 2014 +Contact: Pratyush Anand +Description: + Write to this node to issue "U3 exit" for Link Layer + Validation device. It is needed for TD.7.36. diff --git a/Documentation/ABI/testing/sysfs-class-iommu b/Documentation/ABI/testing/sysfs-class-iommu new file mode 100644 index 0000000000000000000000000000000000000000..6d0a1b4be82df80ab3e347e4a977bc537e4dca35 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-iommu @@ -0,0 +1,17 @@ +What: /sys/class/iommu//devices/ +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson +Description: + IOMMU drivers are able to link devices managed by a + given IOMMU here to allow association of IOMMU to + device. + +What: /sys/devices/.../iommu +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson +Description: + IOMMU drivers are able to link the IOMMU for a + given device here to allow association of device to + IOMMU. diff --git a/Documentation/ABI/testing/sysfs-class-iommu-amd-iommu b/Documentation/ABI/testing/sysfs-class-iommu-amd-iommu new file mode 100644 index 0000000000000000000000000000000000000000..d6ba8e8a4a97624c0a33efb8e8d42f1456a97d64 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-iommu-amd-iommu @@ -0,0 +1,14 @@ +What: /sys/class/iommu//amd-iommu/cap +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson +Description: + IOMMU capability header as documented in the AMD IOMMU + specification. Format: %x + +What: /sys/class/iommu//amd-iommu/features +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson +Description: + Extended features of the IOMMU. Format: %llx diff --git a/Documentation/ABI/testing/sysfs-class-iommu-intel-iommu b/Documentation/ABI/testing/sysfs-class-iommu-intel-iommu new file mode 100644 index 0000000000000000000000000000000000000000..258cc246d98e66b51391d61831373e2af968b84b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-iommu-intel-iommu @@ -0,0 +1,32 @@ +What: /sys/class/iommu//intel-iommu/address +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson +Description: + Physical address of the VT-d DRHD for this IOMMU. + Format: %llx. This allows association of a sysfs + intel-iommu with a DMAR DRHD table entry. + +What: /sys/class/iommu//intel-iommu/cap +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson +Description: + The cached hardware capability register value + of this DRHD unit. Format: %llx. + +What: /sys/class/iommu//intel-iommu/ecap +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson +Description: + The cached hardware extended capability register + value of this DRHD unit. Format: %llx. + +What: /sys/class/iommu//intel-iommu/version +Date: June 2014 +KernelVersion: 3.17 +Contact: Alex Williamson +Description: + The architecture version as reported from the + VT-d VER_REG. Format: %d:%d, major:minor diff --git a/Documentation/ABI/testing/sysfs-class-leds-gt683r b/Documentation/ABI/testing/sysfs-class-leds-gt683r new file mode 100644 index 0000000000000000000000000000000000000000..e4fae6026e793a080fe4d1814bad04b110bfc70a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-leds-gt683r @@ -0,0 +1,16 @@ +What: /sys/class/leds//gt683r/mode +Date: Jun 2014 +KernelVersion: 3.17 +Contact: Janne Kanniainen +Description: + Set the mode of LEDs. You should notice that changing the mode + of one LED will update the mode of its two sibling devices as + well. + + 0 - normal + 1 - audio + 2 - breathing + + Normal: LEDs are fully on when enabled + Audio: LEDs brightness depends on sound level + Breathing: LEDs brightness varies at human breathing rate \ No newline at end of file diff --git a/Documentation/ABI/testing/sysfs-class-mei b/Documentation/ABI/testing/sysfs-class-mei new file mode 100644 index 0000000000000000000000000000000000000000..0ec8b8178c41305a4435b208646715c22b94154a --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-mei @@ -0,0 +1,16 @@ +What: /sys/class/mei/ +Date: May 2014 +KernelVersion: 3.17 +Contact: Tomas Winkler +Description: + The mei/ class sub-directory belongs to mei device class + + +What: /sys/class/mei/meiN/ +Date: May 2014 +KernelVersion: 3.17 +Contact: Tomas Winkler +Description: + The /sys/class/mei/meiN directory is created for + each probed mei device + diff --git a/Documentation/ABI/testing/sysfs-class-mtd b/Documentation/ABI/testing/sysfs-class-mtd index 1399bb2da3ebf762ffd0c392c07121d1687ee1dd..76ee192f80a080b12f319d2e6624f38606f4efa7 100644 --- a/Documentation/ABI/testing/sysfs-class-mtd +++ b/Documentation/ABI/testing/sysfs-class-mtd @@ -184,3 +184,41 @@ Description: It will always be a non-negative integer. In the case of devices lacking any ECC capability, it is 0. + +What: /sys/class/mtd/mtdX/ecc_failures +Date: June 2014 +KernelVersion: 3.17 +Contact: linux-mtd@lists.infradead.org +Description: + The number of failures reported by this device's ECC. Typically, + these failures are associated with failed read operations. + + It will always be a non-negative integer. In the case of + devices lacking any ECC capability, it is 0. + +What: /sys/class/mtd/mtdX/corrected_bits +Date: June 2014 +KernelVersion: 3.17 +Contact: linux-mtd@lists.infradead.org +Description: + The number of bits that have been corrected by means of the + device's ECC. + + It will always be a non-negative integer. In the case of + devices lacking any ECC capability, it is 0. + +What: /sys/class/mtd/mtdX/bad_blocks +Date: June 2014 +KernelVersion: 3.17 +Contact: linux-mtd@lists.infradead.org +Description: + The number of blocks marked as bad, if any, in this partition. + +What: /sys/class/mtd/mtdX/bbt_blocks +Date: June 2014 +KernelVersion: 3.17 +Contact: linux-mtd@lists.infradead.org +Description: + The number of blocks that are marked as reserved, if any, in + this partition. These are typically used to store the in-flash + bad block table (BBT). diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net index 416c5d59f52eaf02081b88901cb0f165713e7e6a..d322b0581194a64a3e9791ef7864d17a95cce985 100644 --- a/Documentation/ABI/testing/sysfs-class-net +++ b/Documentation/ABI/testing/sysfs-class-net @@ -1,3 +1,14 @@ +What: /sys/class/net//name_assign_type +Date: July 2014 +KernelVersion: 3.17 +Contact: netdev@vger.kernel.org +Description: + Indicates the name assignment type. Possible values are: + 1: enumerated by the kernel, possibly in an unpredictable way + 2: predictably named by the kernel + 3: named by userspace + 4: renamed + What: /sys/class/net//addr_assign_type Date: July 2010 KernelVersion: 3.2 diff --git a/Documentation/ABI/testing/sysfs-driver-genwqe b/Documentation/ABI/testing/sysfs-driver-genwqe index 1870737a1f5eff81d9cdbee653c2e8a5dd627123..64ac6d567c4b95eefdb7432a7dab65b3ad7d030d 100644 --- a/Documentation/ABI/testing/sysfs-driver-genwqe +++ b/Documentation/ABI/testing/sysfs-driver-genwqe @@ -25,6 +25,15 @@ Date: Oct 2013 Contact: haver@linux.vnet.ibm.com Description: Interface to set the next bitstream to be used. +What: /sys/class/genwqe/genwqe_card/reload_bitstream +Date: May 2014 +Contact: klebers@linux.vnet.ibm.com +Description: Interface to trigger a PCIe card reset to reload the bitstream. + sudo sh -c 'echo 1 > \ + /sys/class/genwqe/genwqe0_card/reload_bitstream' + If successfully, the card will come back with the bitstream set + on 'next_bitstream'. + What: /sys/class/genwqe/genwqe_card/tempsens Date: Oct 2013 Contact: haver@linux.vnet.ibm.com diff --git a/Documentation/ABI/testing/sysfs-driver-hid-lenovo-tpkbd b/Documentation/ABI/testing/sysfs-driver-hid-lenovo similarity index 75% rename from Documentation/ABI/testing/sysfs-driver-hid-lenovo-tpkbd rename to Documentation/ABI/testing/sysfs-driver-hid-lenovo index 57b92cbdceae9c75ca0855f9079c67593f77956b..53a0725962e1ac53036b78d0f9da6f852092c447 100644 --- a/Documentation/ABI/testing/sysfs-driver-hid-lenovo-tpkbd +++ b/Documentation/ABI/testing/sysfs-driver-hid-lenovo @@ -4,18 +4,21 @@ Contact: linux-input@vger.kernel.org Description: This controls if mouse clicks should be generated if the trackpoint is quickly pressed. How fast this press has to be is being controlled by press_speed. Values are 0 or 1. + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/-:./::./dragging Date: July 2011 Contact: linux-input@vger.kernel.org Description: If this setting is enabled, it is possible to do dragging by pressing the trackpoint. This requires press_to_select to be enabled. Values are 0 or 1. + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/-:./::./release_to_select Date: July 2011 Contact: linux-input@vger.kernel.org Description: For details regarding this setting please refer to http://www.pc.ibm.com/ww/healthycomputing/trkpntb.html Values are 0 or 1. + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/-:./::./select_right Date: July 2011 @@ -23,16 +26,25 @@ Contact: linux-input@vger.kernel.org Description: This setting controls if the mouse click events generated by pressing the trackpoint (if press_to_select is enabled) generate a left or right mouse button click. Values are 0 or 1. + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/-:./::./sensitivity Date: July 2011 Contact: linux-input@vger.kernel.org Description: This file contains the trackpoint sensitivity. Values are decimal integers from 1 (lowest sensitivity) to 255 (highest sensitivity). + Applies to Thinkpad USB Keyboard with TrackPoint. What: /sys/bus/usb/devices/-:./::./press_speed Date: July 2011 Contact: linux-input@vger.kernel.org Description: This setting controls how fast the trackpoint needs to be pressed to generate a mouse click if press_to_select is enabled. Values are decimal integers from 1 (slowest) to 255 (fastest). + Applies to Thinkpad USB Keyboard with TrackPoint. +What: /sys/bus/usb/devices/-:./::./fn_lock +Date: July 2014 +Contact: linux-input@vger.kernel.org +Description: This setting controls whether Fn Lock is enabled on the keyboard (i.e. if F1 is Mute or F1) + Values are 0 or 1 + Applies to ThinkPad Compact (USB|Bluetooth) Keyboard with TrackPoint. diff --git a/Documentation/ABI/testing/sysfs-driver-pciback b/Documentation/ABI/testing/sysfs-driver-pciback new file mode 100644 index 0000000000000000000000000000000000000000..6a733bfa37e6530dc3a0c1e9a0ace7ff43cc1b80 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-pciback @@ -0,0 +1,13 @@ +What: /sys/bus/pci/drivers/pciback/quirks +Date: Oct 2011 +KernelVersion: 3.1 +Contact: xen-devel@lists.xenproject.org +Description: + If the permissive attribute is set, then writing a string in + the format of DDDD:BB:DD.F-REG:SIZE:MASK will allow the guest + to write and read from the PCI device. That is Domain:Bus: + Device.Function-Register:Size:Mask (Domain is optional). + For example: + #echo 00:19.0-E0:2:FF > /sys/bus/pci/drivers/pciback/quirks + will allow the guest to read and write to the configuration + register 0x0E. diff --git a/Documentation/ABI/testing/sysfs-driver-tegra-fuse b/Documentation/ABI/testing/sysfs-driver-tegra-fuse new file mode 100644 index 0000000000000000000000000000000000000000..69f5af632657c58cf40bd386291a740d797ef349 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-tegra-fuse @@ -0,0 +1,11 @@ +What: /sys/devices/*//fuse +Date: February 2014 +Contact: Peter De Schrijver +Description: read-only access to the efuses on Tegra20, Tegra30, Tegra114 + and Tegra124 SoC's from NVIDIA. The efuses contain write once + data programmed at the factory. The data is layed out in 32bit + words in LSB first format. Each bit represents a single value + as decoded from the fuse registers. Bits order/assignment + exactly matches the HW registers, including any unused bits. +Users: any user space application which wants to read the efuses on + Tegra SoC's diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom index 7fc781048b799a2f32bed2775d2f1fc97e8534ec..c4f0fed64a6e5ebca402b340757f6a3eb4b0c376 100644 --- a/Documentation/ABI/testing/sysfs-driver-wacom +++ b/Documentation/ABI/testing/sysfs-driver-wacom @@ -1,48 +1,27 @@ -WWhat: /sys/class/hidraw/hidraw*/device/oled*_img -Date: June 2012 -Contact: linux-bluetooth@vger.kernel.org -Description: - The /sys/class/hidraw/hidraw*/device/oled*_img files control - OLED mocro displays on Intuos4 Wireless tablet. Accepted image - has to contain 256 bytes (64x32 px 1 bit colour). The format - is the same as PBM image 62x32px without header (64 bits per - horizontal line, 32 lines). An example of setting OLED No. 0: - dd bs=256 count=1 if=img_file of=[path to oled0_img]/oled0_img - The attribute is read only and no local copy of the image is - stored. - -What: /sys/class/hidraw/hidraw*/device/speed +What: /sys/bus/hid/devices/::./speed Date: April 2010 Kernel Version: 2.6.35 Contact: linux-bluetooth@vger.kernel.org Description: - The /sys/class/hidraw/hidraw*/device/speed file controls - reporting speed of Wacom bluetooth tablet. Reading from - this file returns 1 if tablet reports in high speed mode + The /sys/bus/hid/devices/::./speed file + controls reporting speed of Wacom bluetooth tablet. Reading + from this file returns 1 if tablet reports in high speed mode or 0 otherwise. Writing to this file one of these values switches reporting speed. -What: /sys/class/leds/0005\:056A\:00BD.0001\:selector\:*/ -Date: May 2012 -Kernel Version: 3.5 -Contact: linux-bluetooth@vger.kernel.org -Description: - LED selector for Intuos4 WL. There are 4 leds, but only one LED - can be lit at a time. Max brightness is 127. - -What: /sys/bus/usb/devices/-:./wacom_led/led -Date: August 2011 +What: /sys/bus/hid/devices/::./wacom_led/led +Date: August 2014 Contact: linux-input@vger.kernel.org Description: Attribute group for control of the status LEDs and the OLEDs. This attribute group is only available for Intuos 4 M, L, - and XL (with LEDs and OLEDs), Intuos 5 (LEDs only), and Cintiq - 21UX2 and Cintiq 24HD (LEDs only). Therefore its presence - implicitly signifies the presence of said LEDs and OLEDs on the - tablet device. + and XL (with LEDs and OLEDs), Intuos 4 WL, Intuos 5 (LEDs only), + Intuos Pro (LEDs only) and Cintiq 21UX2 and Cintiq 24HD + (LEDs only). Therefore its presence implicitly signifies the + presence of said LEDs and OLEDs on the tablet device. -What: /sys/bus/usb/devices/-:./wacom_led/status0_luminance -Date: August 2011 +What: /sys/bus/hid/devices/::./wacom_led/status0_luminance +Date: August 2014 Contact: linux-input@vger.kernel.org Description: Writing to this file sets the status LED luminance (1..127) @@ -50,16 +29,16 @@ Description: button is pressed on the stylus. This luminance level is normally lower than the level when a button is pressed. -What: /sys/bus/usb/devices/-:./wacom_led/status1_luminance -Date: August 2011 +What: /sys/bus/hid/devices/::./wacom_led/status1_luminance +Date: August 2014 Contact: linux-input@vger.kernel.org Description: Writing to this file sets the status LED luminance (1..127) when the stylus touches the tablet surface, or any button is pressed on the stylus. -What: /sys/bus/usb/devices/-:./wacom_led/status_led0_select -Date: August 2011 +What: /sys/bus/hid/devices/::./wacom_led/status_led0_select +Date: August 2014 Contact: linux-input@vger.kernel.org Description: Writing to this file sets which one of the four (for Intuos 4 @@ -67,23 +46,23 @@ Description: 24HD) status LEDs is active (0..3). The other three LEDs on the same side are always inactive. -What: /sys/bus/usb/devices/-:./wacom_led/status_led1_select -Date: September 2011 +What: /sys/bus/hid/devices/::./wacom_led/status_led1_select +Date: August 2014 Contact: linux-input@vger.kernel.org Description: Writing to this file sets which one of the left four (for Cintiq 21UX2 and Cintiq 24HD) status LEDs is active (0..3). The other three LEDs on the left are always inactive. -What: /sys/bus/usb/devices/-:./wacom_led/buttons_luminance -Date: August 2011 +What: /sys/bus/hid/devices/::./wacom_led/buttons_luminance +Date: August 2014 Contact: linux-input@vger.kernel.org Description: Writing to this file sets the overall luminance level (0..15) of all eight button OLED displays. -What: /sys/bus/usb/devices/-:./wacom_led/button_rawimg -Date: August 2011 +What: /sys/bus/hid/devices/::./wacom_led/button_rawimg +Date: August 2014 Contact: linux-input@vger.kernel.org Description: When writing a 1024 byte raw image in Wacom Intuos 4 @@ -93,3 +72,8 @@ Description: byte chunk encodes the image data for two consecutive lines on the display. The low nibble of each byte contains the first line, and the high nibble contains the second line. + When the Wacom Intuos 4 is connected over Bluetooth, the + image has to contain 256 bytes (64x32 px 1 bit colour). + The format is also scrambled, like in the USB mode, and it can + be summarized by converting 76543210 into GECA6420. + HGFEDCBA HFDB7531 diff --git a/Documentation/ABI/testing/sysfs-fs-nilfs2 b/Documentation/ABI/testing/sysfs-fs-nilfs2 new file mode 100644 index 0000000000000000000000000000000000000000..304ba84a973a75f3253ece300a4dbc7850aee8fa --- /dev/null +++ b/Documentation/ABI/testing/sysfs-fs-nilfs2 @@ -0,0 +1,269 @@ + +What: /sys/fs/nilfs2/features/revision +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show current revision of NILFS file system driver. + This value informs about file system revision that + driver is ready to support. + +What: /sys/fs/nilfs2/features/README +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Describe attributes of /sys/fs/nilfs2/features group. + +What: /sys/fs/nilfs2//revision +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show NILFS file system revision on volume. + This value informs about metadata structures' + revision on mounted volume. + +What: /sys/fs/nilfs2//blocksize +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show volume's block size in bytes. + +What: /sys/fs/nilfs2//device_size +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show volume size in bytes. + +What: /sys/fs/nilfs2//free_blocks +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show count of free blocks on volume. + +What: /sys/fs/nilfs2//uuid +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show volume's UUID (Universally Unique Identifier). + +What: /sys/fs/nilfs2//volume_name +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show volume's label. + +What: /sys/fs/nilfs2//README +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Describe attributes of /sys/fs/nilfs2/ group. + +What: /sys/fs/nilfs2//superblock/sb_write_time +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show last write time of super block in human-readable + format. + +What: /sys/fs/nilfs2//superblock/sb_write_time_secs +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show last write time of super block in seconds. + +What: /sys/fs/nilfs2//superblock/sb_write_count +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show current write count of super block. + +What: /sys/fs/nilfs2//superblock/sb_update_frequency +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show/Set interval of periodical update of superblock + (in seconds). + +What: /sys/fs/nilfs2//superblock/README +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Describe attributes of /sys/fs/nilfs2//superblock + group. + +What: /sys/fs/nilfs2//segctor/last_pseg_block +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show start block number of the latest segment. + +What: /sys/fs/nilfs2//segctor/last_seg_sequence +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show sequence value of the latest segment. + +What: /sys/fs/nilfs2//segctor/last_seg_checkpoint +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show checkpoint number of the latest segment. + +What: /sys/fs/nilfs2//segctor/current_seg_sequence +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show segment sequence counter. + +What: /sys/fs/nilfs2//segctor/current_last_full_seg +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show index number of the latest full segment. + +What: /sys/fs/nilfs2//segctor/next_full_seg +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show index number of the full segment index + to be used next. + +What: /sys/fs/nilfs2//segctor/next_pseg_offset +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show offset of next partial segment in the current + full segment. + +What: /sys/fs/nilfs2//segctor/next_checkpoint +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show next checkpoint number. + +What: /sys/fs/nilfs2//segctor/last_seg_write_time +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show write time of the last segment in + human-readable format. + +What: /sys/fs/nilfs2//segctor/last_seg_write_time_secs +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show write time of the last segment in seconds. + +What: /sys/fs/nilfs2//segctor/last_nongc_write_time +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show write time of the last segment not for cleaner + operation in human-readable format. + +What: /sys/fs/nilfs2//segctor/last_nongc_write_time_secs +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show write time of the last segment not for cleaner + operation in seconds. + +What: /sys/fs/nilfs2//segctor/dirty_data_blocks_count +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show number of dirty data blocks. + +What: /sys/fs/nilfs2//segctor/README +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Describe attributes of /sys/fs/nilfs2//segctor + group. + +What: /sys/fs/nilfs2//segments/segments_number +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show number of segments on a volume. + +What: /sys/fs/nilfs2//segments/blocks_per_segment +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show number of blocks in segment. + +What: /sys/fs/nilfs2//segments/clean_segments +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show count of clean segments. + +What: /sys/fs/nilfs2//segments/dirty_segments +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show count of dirty segments. + +What: /sys/fs/nilfs2//segments/README +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Describe attributes of /sys/fs/nilfs2//segments + group. + +What: /sys/fs/nilfs2//checkpoints/checkpoints_number +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show number of checkpoints on volume. + +What: /sys/fs/nilfs2//checkpoints/snapshots_number +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show number of snapshots on volume. + +What: /sys/fs/nilfs2//checkpoints/last_seg_checkpoint +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show checkpoint number of the latest segment. + +What: /sys/fs/nilfs2//checkpoints/next_checkpoint +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show next checkpoint number. + +What: /sys/fs/nilfs2//checkpoints/README +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Describe attributes of /sys/fs/nilfs2//checkpoints + group. + +What: /sys/fs/nilfs2//mounted_snapshots/README +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Describe content of /sys/fs/nilfs2//mounted_snapshots + group. + +What: /sys/fs/nilfs2//mounted_snapshots//inodes_count +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show number of inodes for snapshot. + +What: /sys/fs/nilfs2//mounted_snapshots//blocks_count +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Show number of blocks for snapshot. + +What: /sys/fs/nilfs2//mounted_snapshots//README +Date: April 2014 +Contact: "Vyacheslav Dubeyko" +Description: + Describe attributes of /sys/fs/nilfs2//mounted_snapshots/ + group. diff --git a/Documentation/ABI/testing/sysfs-fs-xfs b/Documentation/ABI/testing/sysfs-fs-xfs new file mode 100644 index 0000000000000000000000000000000000000000..ea0cc8c42093fdf86edc48e7cdd9f00362079359 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-fs-xfs @@ -0,0 +1,39 @@ +What: /sys/fs/xfs//log/log_head_lsn +Date: July 2014 +KernelVersion: 3.17 +Contact: xfs@oss.sgi.com +Description: + The log sequence number (LSN) of the current head of the + log. The LSN is exported in "cycle:basic block" format. +Users: xfstests + +What: /sys/fs/xfs//log/log_tail_lsn +Date: July 2014 +KernelVersion: 3.17 +Contact: xfs@oss.sgi.com +Description: + The log sequence number (LSN) of the current tail of the + log. The LSN is exported in "cycle:basic block" format. + +What: /sys/fs/xfs//log/reserve_grant_head +Date: July 2014 +KernelVersion: 3.17 +Contact: xfs@oss.sgi.com +Description: + The current state of the log reserve grant head. It + represents the total log reservation of all currently + outstanding transactions. The grant head is exported in + "cycle:bytes" format. +Users: xfstests + +What: /sys/fs/xfs//log/write_grant_head +Date: July 2014 +KernelVersion: 3.17 +Contact: xfs@oss.sgi.com +Description: + The current state of the log write grant head. It + represents the total log reservation of all currently + oustanding transactions, including regrants due to + rolling transactions. The grant head is exported in + "cycle:bytes" format. +Users: xfstests diff --git a/Documentation/ABI/testing/sysfs-tty b/Documentation/ABI/testing/sysfs-tty index ad22fb0ee765b792a3bc0ab7f9d2995c69f1d5d0..9eb3c2b6b0406eeec340f31a47f837ea4f542258 100644 --- a/Documentation/ABI/testing/sysfs-tty +++ b/Documentation/ABI/testing/sysfs-tty @@ -138,3 +138,19 @@ Description: These sysfs values expose the TIOCGSERIAL interface via sysfs rather than via ioctls. + +What: /sys/class/tty/ttyS0/rx_trig_bytes +Date: May 2014 +Contact: Yoshihiro YUNOMAE +Description: + Shows current RX interrupt trigger bytes or sets the + user specified value to change it for the FIFO buffer. + Users can show or set this value regardless of opening the + serial device file or not. + + The RX trigger can be set one of four kinds of values for UART + serials. When users input a meaning less value to this I/F, + the RX trigger is changed to the nearest lower value for the + device specification. For example, when user sets 7bytes on + 16550A, which has 1/4/8/14 bytes trigger, the RX trigger is + automatically changed to 4 bytes. diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index cc63f30de166501e37f4ec4a707dc3ad5a0c371e..f2130586ef5d9ef20317dcc881a17dda9de1c2c6 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -54,7 +54,7 @@ !Ikernel/sched/cpupri.c !Ikernel/sched/fair.c !Iinclude/linux/completion.h -!Ekernel/timer.c +!Ekernel/time/timer.c Wait queues and Wake events !Iinclude/linux/wait.h @@ -63,7 +63,7 @@ High-resolution timers !Iinclude/linux/ktime.h !Iinclude/linux/hrtimer.h -!Ekernel/hrtimer.c +!Ekernel/time/hrtimer.c Workqueues and Kevents !Ekernel/workqueue.c @@ -128,8 +128,12 @@ X!Edrivers/base/interface.c !Edrivers/base/bus.c Device Drivers DMA Management -!Edrivers/base/dma-buf.c -!Edrivers/base/reservation.c +!Edrivers/dma-buf/dma-buf.c +!Edrivers/dma-buf/fence.c +!Edrivers/dma-buf/seqno-fence.c +!Iinclude/linux/fence.h +!Iinclude/linux/seqno-fence.h +!Edrivers/dma-buf/reservation.c !Iinclude/linux/reservation.h !Edrivers/base/dma-coherent.c !Edrivers/base/dma-mapping.c diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 7df3134ebc0e1d4b88985132eda82f26b267f4f3..bacefc5b222ec0dff365e83c63191859d5803a22 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -315,7 +315,7 @@ char *date; drm_dev_unregister() followed by a call to drm_dev_unref(). -!Edrivers/gpu/drm/drm_stub.c +!Edrivers/gpu/drm/drm_drv.c Driver Load @@ -1610,7 +1610,7 @@ int max_width, max_height; The connector is then registered with a call to drm_connector_init with a pointer to the connector functions and a connector type, and exposed through sysfs with a call to - drm_sysfs_connector_add. + drm_connector_register. Supported connector types are @@ -1768,7 +1768,7 @@ int max_width, max_height; (drm_encoder_cleanup) and connectors (drm_connector_cleanup). Furthermore, connectors that have been added to sysfs must be removed by a call to - drm_sysfs_connector_remove before calling + drm_connector_unregister before calling drm_connector_cleanup. @@ -1813,7 +1813,7 @@ void intel_crt_init(struct drm_device *dev) drm_encoder_helper_add(&intel_output->enc, &intel_crt_helper_funcs); drm_connector_helper_add(connector, &intel_crt_connector_helper_funcs); - drm_sysfs_connector_add(connector); + drm_connector_register(connector); }]]> In the example above (taken from the i915 driver), a CRTC, connector and @@ -2336,6 +2336,12 @@ void intel_crt_init(struct drm_device *dev) !Pdrivers/gpu/drm/drm_dp_helper.c dp helpers !Iinclude/drm/drm_dp_helper.h !Edrivers/gpu/drm/drm_dp_helper.c + + + Display Port MST Helper Functions Reference +!Pdrivers/gpu/drm/drm_dp_mst_topology.c dp mst helper +!Iinclude/drm/drm_dp_mst_helper.h +!Edrivers/gpu/drm/drm_dp_mst_topology.c EDID Helper Functions Reference @@ -2502,7 +2508,7 @@ void intel_crt_init(struct drm_device *dev) Description/Restrictions - DRM + DRM Generic “EDID” BLOB | IMMUTABLE @@ -2633,7 +2639,7 @@ void intel_crt_init(struct drm_device *dev) TBD - Optional + Optional “scaling mode” ENUM { "None", "Full", "Center", "Full aspect" } @@ -2641,6 +2647,15 @@ void intel_crt_init(struct drm_device *dev) TBD + "aspect ratio" + ENUM + { "None", "4:3", "16:9" } + Connector + DRM property to set aspect ratio from user space app. + This enum is made generic to allow addition of custom aspect + ratios. + + “dirty” ENUM | IMMUTABLE { "Off", "On", "Annotate" } @@ -2649,7 +2664,7 @@ void intel_crt_init(struct drm_device *dev) i915 - Generic + Generic "Broadcast RGB" ENUM { "Automatic", "Full", "Limited 16:235" } @@ -2664,10 +2679,11 @@ void intel_crt_init(struct drm_device *dev) TBD - Standard name as in DRM - Standard type as in DRM - Standard value as in DRM - Standard Object as in DRM + Plane + “rotation” + BITMASK + { 0, "rotate-0" }, { 2, "rotate-180" } + Plane TBD @@ -2799,8 +2815,8 @@ void intel_crt_init(struct drm_device *dev) TBD - CDV gma-500 - Generic + CDV gma-500 + Generic "Broadcast RGB" ENUM { “Full”, “Limited 16:235” } @@ -2815,15 +2831,8 @@ void intel_crt_init(struct drm_device *dev) TBD - Standard name as in DRM - Standard type as in DRM - Standard value as in DRM - Standard Object as in DRM - TBD - - - Poulsbo - Generic + Poulsbo + Generic “backlight” RANGE Min=0, Max=100 @@ -2831,13 +2840,6 @@ void intel_crt_init(struct drm_device *dev) TBD - Standard name as in DRM - Standard type as in DRM - Standard value as in DRM - Standard Object as in DRM - TBD - - SDVO-TV “mode” ENUM @@ -3064,7 +3066,7 @@ void intel_crt_init(struct drm_device *dev) TBD - i2c/ch7006_drv + i2c/ch7006_drv Generic “scale” RANGE @@ -3073,14 +3075,7 @@ void intel_crt_init(struct drm_device *dev) TBD - TV - Standard names as in DRM - Standard types as in DRM - Standard Values as in DRM - Standard object as in DRM - TBD - - + TV “mode” ENUM { "PAL", "PAL-M","PAL-N"}, ”PAL-Nc" @@ -3089,7 +3084,7 @@ void intel_crt_init(struct drm_device *dev) TBD - nouveau + nouveau NV10 Overlay "colorkey" RANGE @@ -3198,14 +3193,6 @@ void intel_crt_init(struct drm_device *dev) TBD - Generic - Standard name as in DRM - Standard type as in DRM - Standard value as in DRM - Standard Object as in DRM - TBD - - omap Generic “rotation” @@ -3236,7 +3223,7 @@ void intel_crt_init(struct drm_device *dev) TBD - radeon + radeon DVI-I “coherent” RANGE @@ -3308,14 +3295,6 @@ void intel_crt_init(struct drm_device *dev) TBD - Generic - Standard name as in DRM - Standard type as in DRM - Standard value as in DRM - Standard Object as in DRM - TBD - - rcar-du Generic "alpha" diff --git a/Documentation/DocBook/gadget.tmpl b/Documentation/DocBook/gadget.tmpl index 2c425d70f7e2670405164da3b70e3a6e9d734811..64162922117651344d698ffd53ece06eafca3324 100644 --- a/Documentation/DocBook/gadget.tmpl +++ b/Documentation/DocBook/gadget.tmpl @@ -556,11 +556,11 @@ been converted to this framework. Near-term plans include converting all of them, except for "gadgetfs". -!Edrivers/usb/gadget/f_acm.c -!Edrivers/usb/gadget/f_ecm.c -!Edrivers/usb/gadget/f_subset.c -!Edrivers/usb/gadget/f_obex.c -!Edrivers/usb/gadget/f_serial.c +!Edrivers/usb/gadget/function/f_acm.c +!Edrivers/usb/gadget/function/f_ecm.c +!Edrivers/usb/gadget/function/f_subset.c +!Edrivers/usb/gadget/function/f_obex.c +!Edrivers/usb/gadget/function/f_serial.c diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile index 639e74857968ae3a47ae9bdc1aed0bbd4485ec3f..df2962d9e11e1f79e84779557c68bc73ea0f1670 100644 --- a/Documentation/DocBook/media/Makefile +++ b/Documentation/DocBook/media/Makefile @@ -174,7 +174,7 @@ FILENAME = \ DOCUMENTED = \ -e "s/\(enum *\)v4l2_mpeg_cx2341x_video_\([a-z]*_spatial_filter_type\)/\1v4l2_mpeg_cx2341x_video_\2<\/link>/g" \ -e "s/\(\(enum\|struct\) *\)\(v4l2_[a-zA-Z0-9_]*\)/\1\3<\/link>/g" \ - -e "s/\(V4L2_PIX_FMT_[A-Z0-9_]\+\) /\1<\/link> /g" \ + -e "s/\(V4L2_PIX_FMT_[A-Z0-9_]\+\)\(\s\+v4l2_fourcc\)/\1<\/link>\2/g" \ -e ":a;s/\(linkend=\".*\)_\(.*\">\)/\1-\2/;ta" \ -e "s/v4l2\-mpeg\-vbi\-ITV0/v4l2-mpeg-vbi-itv0-1/g" diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index 24c22cabc66893000d3ba3e80314bee755b63641..948ddaab592e87b9dc9fdae74a66bf7632a371f0 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -555,10 +555,46 @@ typedef enum fe_delivery_system {
<constant>DTV_ISDBT_LAYER*_TIME_INTERLEAVING</constant> - Possible values: 0, 1, 2, 3, -1 (AUTO) - Note: The real inter-leaver depth-names depend on the mode (fft-size); the values - here are referring to what can be found in the TMCC-structure - - independent of the mode. + Valid values: 0, 1, 2, 4, -1 (AUTO) + when DTV_ISDBT_SOUND_BROADCASTING is active, value 8 is also valid. + Note: The real time interleaving length depends on the mode (fft-size). The values + here are referring to what can be found in the TMCC-structure, as shown in the table below. + + + + + DTV_ISDBT_LAYER*_TIME_INTERLEAVING + Mode 1 (2K FFT) + Mode 2 (4K FFT) + Mode 3 (8K FFT) + + + 0 + 0 + 0 + 0 + + + 1 + 4 + 2 + 1 + + + 2 + 8 + 4 + 2 + + + 4 + 16 + 8 + 4 + + + +
<constant>DTV_ATSCMH_FIC_VER</constant> diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index 47198eef75a4c32b5227cb71b041e00749dc1000..9f5ffd85560b58b3032867b57ec095153e7bfd07 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -13,6 +13,19 @@ correctly with any device. All controls are accessed using an ID value. V4L2 defines several IDs for specific purposes. Drivers can also implement their own custom controls using V4L2_CID_PRIVATE_BASE +The use of V4L2_CID_PRIVATE_BASE +is problematic because different drivers may use the same +V4L2_CID_PRIVATE_BASE ID for different controls. +This makes it hard to programatically set such controls since the meaning +of the control with that ID is driver dependent. In order to resolve this +drivers use unique IDs and the V4L2_CID_PRIVATE_BASE +IDs are mapped to those unique IDs by the kernel. Consider these +V4L2_CID_PRIVATE_BASE IDs as aliases to the real +IDs. +Many applications today still use the V4L2_CID_PRIVATE_BASE +IDs instead of using &VIDIOC-QUERYCTRL; with the V4L2_CTRL_FLAG_NEXT_CTRL +flag to enumerate all IDs, so support for V4L2_CID_PRIVATE_BASE +is still around. and higher values. The pre-defined control IDs have the prefix V4L2_CID_, and are listed in . The ID is used when querying the attributes of @@ -31,25 +44,22 @@ the current video input or output, tuner or modulator, or audio input or output. Different in the sense of other bounds, another default and current value, step size or other menu items. A control with a certain custom ID can also change name and -type. - It will be more convenient for applications if drivers -make use of the V4L2_CTRL_FLAG_DISABLED flag, but -that was never required. - Control values are stored globally, they do not +type. + + If a control is not applicable to the current configuration +of the device (for example, it doesn't apply to the current video input) +drivers set the V4L2_CTRL_FLAG_INACTIVE flag. + + Control values are stored globally, they do not change when switching except to stay within the reported bounds. They also do not change ⪚ when the device is opened or closed, when the tuner radio frequency is changed or generally never without -application request. Since V4L2 specifies no event mechanism, panel -applications intended to cooperate with other panel applications (be -they built into a larger application, as a TV viewer) may need to -regularly poll control values to update their user -interface. - Applications could call an ioctl to request events. -After another process called &VIDIOC-S-CTRL; or another ioctl changing -shared properties the &func-select; function would indicate -readability until any ioctl (querying the properties) is -called. - +application request. + + V4L2 specifies an event mechanism to notify applications +when controls change value (see &VIDIOC-SUBSCRIBE-EVENT;, event +V4L2_EVENT_CTRL), panel applications might want to make +use of that in order to always reflect the correct control value. All controls use machine endianness. @@ -398,14 +408,17 @@ to work. V4L2_CID_ALPHA_COMPONENT integer - Sets the alpha color component on the capture device or on - the capture buffer queue of a mem-to-mem device. When a mem-to-mem - device produces frame format that includes an alpha component + Sets the alpha color component. When a capture device (or + capture queue of a mem-to-mem device) produces a frame format that + includes an alpha component (e.g. packed RGB image formats) - and the alpha value is not defined by the mem-to-mem input data - this control lets you select the alpha component value of all - pixels. It is applicable to any pixel format that contains an alpha - component. + and the alpha value is not defined by the device or the mem-to-mem + input data this control lets you select the alpha component value of + all pixels. When an output device (or output queue of a mem-to-mem + device) consumes a frame format that doesn't include an alpha + component and the device supports alpha channel processing this + control lets you set the alpha component value of all pixels for + further processing in the device. @@ -434,73 +447,98 @@ Drivers must implement VIDIOC_QUERYCTRL, controls, VIDIOC_QUERYMENU when it has one or more menu type controls. - - Enumerating all controls + + Enumerating all user controls &v4l2-queryctrl; queryctrl; &v4l2-querymenu; querymenu; -static void -enumerate_menu (void) +static void enumerate_menu(void) { - printf (" Menu items:\n"); + printf(" Menu items:\n"); - memset (&querymenu, 0, sizeof (querymenu)); + memset(&querymenu, 0, sizeof(querymenu)); querymenu.id = queryctrl.id; for (querymenu.index = queryctrl.minimum; querymenu.index <= queryctrl.maximum; - querymenu.index++) { - if (0 == ioctl (fd, &VIDIOC-QUERYMENU;, &querymenu)) { - printf (" %s\n", querymenu.name); + querymenu.index++) { + if (0 == ioctl(fd, &VIDIOC-QUERYMENU;, &querymenu)) { + printf(" %s\n", querymenu.name); } } } -memset (&queryctrl, 0, sizeof (queryctrl)); +memset(&queryctrl, 0, sizeof(queryctrl)); for (queryctrl.id = V4L2_CID_BASE; queryctrl.id < V4L2_CID_LASTP1; queryctrl.id++) { - if (0 == ioctl (fd, &VIDIOC-QUERYCTRL;, &queryctrl)) { + if (0 == ioctl(fd, &VIDIOC-QUERYCTRL;, &queryctrl)) { if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) continue; - printf ("Control %s\n", queryctrl.name); + printf("Control %s\n", queryctrl.name); if (queryctrl.type == V4L2_CTRL_TYPE_MENU) - enumerate_menu (); + enumerate_menu(); } else { if (errno == EINVAL) continue; - perror ("VIDIOC_QUERYCTRL"); - exit (EXIT_FAILURE); + perror("VIDIOC_QUERYCTRL"); + exit(EXIT_FAILURE); } } for (queryctrl.id = V4L2_CID_PRIVATE_BASE;; queryctrl.id++) { - if (0 == ioctl (fd, &VIDIOC-QUERYCTRL;, &queryctrl)) { + if (0 == ioctl(fd, &VIDIOC-QUERYCTRL;, &queryctrl)) { if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) continue; - printf ("Control %s\n", queryctrl.name); + printf("Control %s\n", queryctrl.name); if (queryctrl.type == V4L2_CTRL_TYPE_MENU) - enumerate_menu (); + enumerate_menu(); } else { if (errno == EINVAL) break; - perror ("VIDIOC_QUERYCTRL"); - exit (EXIT_FAILURE); + perror("VIDIOC_QUERYCTRL"); + exit(EXIT_FAILURE); } } + + Enumerating all user controls (alternative) + +memset(&queryctrl, 0, sizeof(queryctrl)); + +queryctrl.id = V4L2_CTRL_CLASS_USER | V4L2_CTRL_FLAG_NEXT_CTRL; +while (0 == ioctl(fd, &VIDIOC-QUERYCTRL;, &queryctrl)) { + if (V4L2_CTRL_ID2CLASS(queryctrl.id) != V4L2_CTRL_CLASS_USER) + break; + if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) + continue; + + printf("Control %s\n", queryctrl.name); + + if (queryctrl.type == V4L2_CTRL_TYPE_MENU) + enumerate_menu(); + + queryctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL; +} +if (errno != EINVAL) { + perror("VIDIOC_QUERYCTRL"); + exit(EXIT_FAILURE); +} + + + Changing controls @@ -508,53 +546,53 @@ for (queryctrl.id = V4L2_CID_PRIVATE_BASE;; &v4l2-queryctrl; queryctrl; &v4l2-control; control; -memset (&queryctrl, 0, sizeof (queryctrl)); +memset(&queryctrl, 0, sizeof(queryctrl)); queryctrl.id = V4L2_CID_BRIGHTNESS; -if (-1 == ioctl (fd, &VIDIOC-QUERYCTRL;, &queryctrl)) { +if (-1 == ioctl(fd, &VIDIOC-QUERYCTRL;, &queryctrl)) { if (errno != EINVAL) { - perror ("VIDIOC_QUERYCTRL"); - exit (EXIT_FAILURE); + perror("VIDIOC_QUERYCTRL"); + exit(EXIT_FAILURE); } else { - printf ("V4L2_CID_BRIGHTNESS is not supported\n"); + printf("V4L2_CID_BRIGHTNESS is not supported\n"); } } else if (queryctrl.flags & V4L2_CTRL_FLAG_DISABLED) { - printf ("V4L2_CID_BRIGHTNESS is not supported\n"); + printf("V4L2_CID_BRIGHTNESS is not supported\n"); } else { - memset (&control, 0, sizeof (control)); + memset(&control, 0, sizeof (control)); control.id = V4L2_CID_BRIGHTNESS; control.value = queryctrl.default_value; - if (-1 == ioctl (fd, &VIDIOC-S-CTRL;, &control)) { - perror ("VIDIOC_S_CTRL"); - exit (EXIT_FAILURE); + if (-1 == ioctl(fd, &VIDIOC-S-CTRL;, &control)) { + perror("VIDIOC_S_CTRL"); + exit(EXIT_FAILURE); } } -memset (&control, 0, sizeof (control)); +memset(&control, 0, sizeof(control)); control.id = V4L2_CID_CONTRAST; -if (0 == ioctl (fd, &VIDIOC-G-CTRL;, &control)) { +if (0 == ioctl(fd, &VIDIOC-G-CTRL;, &control)) { control.value += 1; /* The driver may clamp the value or return ERANGE, ignored here */ - if (-1 == ioctl (fd, &VIDIOC-S-CTRL;, &control) + if (-1 == ioctl(fd, &VIDIOC-S-CTRL;, &control) && errno != ERANGE) { - perror ("VIDIOC_S_CTRL"); - exit (EXIT_FAILURE); + perror("VIDIOC_S_CTRL"); + exit(EXIT_FAILURE); } /* Ignore if V4L2_CID_CONTRAST is unsupported */ } else if (errno != EINVAL) { - perror ("VIDIOC_G_CTRL"); - exit (EXIT_FAILURE); + perror("VIDIOC_G_CTRL"); + exit(EXIT_FAILURE); } control.id = V4L2_CID_AUDIO_MUTE; -control.value = TRUE; /* silence */ +control.value = 1; /* silence */ /* Errors ignored */ -ioctl (fd, VIDIOC_S_CTRL, &control); +ioctl(fd, VIDIOC_S_CTRL, &control);
@@ -625,16 +663,29 @@ supported. &v4l2-control;, except for the fact that it also allows for 64-bit values and pointers to be passed. + Since the &v4l2-ext-control; supports pointers it is now +also possible to have controls with compound types such as N-dimensional arrays +and/or structures. You need to specify the V4L2_CTRL_FLAG_NEXT_COMPOUND +when enumerating controls to actually be able to see such compound controls. +In other words, these controls with compound types should only be used +programmatically. + + Since such compound controls need to expose more information +about themselves than is possible with &VIDIOC-QUERYCTRL; the +&VIDIOC-QUERY-EXT-CTRL; ioctl was added. In particular, this ioctl gives +the dimensions of the N-dimensional array if this control consists of more than +one element. + It is important to realize that due to the flexibility of controls it is necessary to check whether the control you want to set actually is supported in the driver and what the valid range of values -is. So use the &VIDIOC-QUERYCTRL; and &VIDIOC-QUERYMENU; ioctls to -check this. Also note that it is possible that some of the menu -indices in a control of type V4L2_CTRL_TYPE_MENU -may not be supported (VIDIOC_QUERYMENU will -return an error). A good example is the list of supported MPEG audio -bitrates. Some drivers only support one or two bitrates, others -support a wider range. +is. So use the &VIDIOC-QUERYCTRL; (or &VIDIOC-QUERY-EXT-CTRL;) and +&VIDIOC-QUERYMENU; ioctls to check this. Also note that it is possible +that some of the menu indices in a control of type +V4L2_CTRL_TYPE_MENU may not be supported +(VIDIOC_QUERYMENU will return an error). A good +example is the list of supported MPEG audio bitrates. Some drivers only +support one or two bitrates, others support a wider range. All controls use machine endianness. @@ -675,12 +726,12 @@ control class is found: qctrl.id = V4L2_CTRL_CLASS_MPEG | V4L2_CTRL_FLAG_NEXT_CTRL; -while (0 == ioctl (fd, &VIDIOC-QUERYCTRL;, &qctrl)) { - if (V4L2_CTRL_ID2CLASS (qctrl.id) != V4L2_CTRL_CLASS_MPEG) +while (0 == ioctl(fd, &VIDIOC-QUERYCTRL;, &qctrl)) { + if (V4L2_CTRL_ID2CLASS(qctrl.id) != V4L2_CTRL_CLASS_MPEG) break; /* ... */ - qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL; - } + qctrl.id |= V4L2_CTRL_FLAG_NEXT_CTRL; +} @@ -700,7 +751,7 @@ ID based on a control ID. VIDIOC_QUERYCTRL will fail when used in combination with V4L2_CTRL_FLAG_NEXT_CTRL. In that case the old method of enumerating control should be used (see -1.8). But if it is supported, then it is guaranteed to enumerate over +). But if it is supported, then it is guaranteed to enumerate over all controls, including driver-private controls. @@ -3998,6 +4049,68 @@ in Annex E of . The length of Radio Text strings depe used to transmit it, either 32 (2A block) or 64 (2B block). However, it is also possible to find receivers which can scroll strings sized as 32 x N or 64 x N characters. So, this control must be configured with steps of 32 or 64 characters. The result is it must always contain a string with size multiple of 32 or 64. + + + V4L2_CID_RDS_TX_MONO_STEREO  + boolean + + Sets the Mono/Stereo bit of the Decoder Identification code. If set, +then the audio was recorded as stereo. + + + V4L2_CID_RDS_TX_ARTIFICIAL_HEAD  + boolean + + Sets the +Artificial Head bit of the Decoder +Identification code. If set, then the audio was recorded using an artificial head. + + + V4L2_CID_RDS_TX_COMPRESSED  + boolean + + Sets the Compressed bit of the Decoder Identification code. If set, +then the audio is compressed. + + + V4L2_CID_RDS_TX_DYNAMIC_PTY  + boolean + + Sets the Dynamic PTY bit of the Decoder Identification code. If set, +then the PTY code is dynamically switched. + + + V4L2_CID_RDS_TX_TRAFFIC_ANNOUNCEMENT  + boolean + + If set, then a traffic announcement is in progress. + + + V4L2_CID_RDS_TX_TRAFFIC_PROGRAM  + boolean + + If set, then the tuned programme carries traffic announcements. + + + V4L2_CID_RDS_TX_MUSIC_SPEECH  + boolean + + If set, then this channel broadcasts music. If cleared, then it +broadcasts speech. If the transmitter doesn't make this distinction, then it should be set. + + + V4L2_CID_RDS_TX_ALT_FREQS_ENABLE  + boolean + + If set, then transmit alternate frequencies. + + + V4L2_CID_RDS_TX_ALT_FREQS  + __u32 array + + The alternate frequencies in kHz units. The RDS standard allows +for up to 25 frequencies to be defined. Drivers may support fewer frequencies so check +the array size. V4L2_CID_AUDIO_LIMITER_ENABLED  @@ -4976,6 +5089,57 @@ description of this control class. Enables/disables RDS reception by the radio tuner + + V4L2_CID_RDS_RX_PTY  + integer + + Gets RDS Programme Type field. +This encodes up to 31 pre-defined programme types. + + + V4L2_CID_RDS_RX_PS_NAME  + string + + Gets the Programme Service name (PS_NAME). +It is intended for static display on a receiver. It is the primary aid to listeners in programme service +identification and selection. In Annex E of , the RDS specification, +there is a full description of the correct character encoding for Programme Service name strings. +Also from RDS specification, PS is usually a single eight character text. However, it is also possible +to find receivers which can scroll strings sized as 8 x N characters. So, this control must be configured +with steps of 8 characters. The result is it must always contain a string with size multiple of 8. + + + V4L2_CID_RDS_RX_RADIO_TEXT  + string + + Gets the Radio Text info. It is a textual description of +what is being broadcasted. RDS Radio Text can be applied when broadcaster wishes to transmit longer PS names, +programme-related information or any other text. In these cases, RadioText can be used in addition to +V4L2_CID_RDS_RX_PS_NAME. The encoding for Radio Text strings is also fully described +in Annex E of . The length of Radio Text strings depends on which RDS Block is being +used to transmit it, either 32 (2A block) or 64 (2B block). However, it is also possible +to find receivers which can scroll strings sized as 32 x N or 64 x N characters. So, this control must be configured +with steps of 32 or 64 characters. The result is it must always contain a string with size multiple of 32 or 64. + + + V4L2_CID_RDS_RX_TRAFFIC_ANNOUNCEMENT  + boolean + + If set, then a traffic announcement is in progress. + + + V4L2_CID_RDS_RX_TRAFFIC_PROGRAM  + boolean + + If set, then the tuned programme carries traffic announcements. + + + V4L2_CID_RDS_RX_MUSIC_SPEECH  + boolean + + If set, then this channel broadcasts music. If cleared, then it +broadcasts speech. If the transmitter doesn't make this distinction, then it will be set. + V4L2_CID_TUNE_DEEMPHASIS  enum v4l2_deemphasis @@ -5007,6 +5171,102 @@ defines possible values for de-emphasis. Here they are: + + +
+ Detect Control Reference + + The Detect class includes controls for common features of + various motion or object detection capable devices. + + + Detect Control IDs + + + + + + + + + + + ID + Type + Description + + + + + + V4L2_CID_DETECT_CLASS  + class + The Detect class +descriptor. Calling &VIDIOC-QUERYCTRL; for this control will return a +description of this control class. + + + V4L2_CID_DETECT_MD_MODE  + menu + Sets the motion detection mode. + + + + + + V4L2_DETECT_MD_MODE_DISABLED + Disable motion detection. + + + V4L2_DETECT_MD_MODE_GLOBAL + Use a single motion detection threshold. + + + V4L2_DETECT_MD_MODE_THRESHOLD_GRID + The image is divided into a grid, each cell with its own + motion detection threshold. These thresholds are set through the + V4L2_CID_DETECT_MD_THRESHOLD_GRID matrix control. + + + V4L2_DETECT_MD_MODE_REGION_GRID + The image is divided into a grid, each cell with its own + region value that specifies which per-region motion detection thresholds + should be used. Each region has its own thresholds. How these per-region + thresholds are set up is driver-specific. The region values for the grid are set + through the V4L2_CID_DETECT_MD_REGION_GRID matrix + control. + + + + + + V4L2_CID_DETECT_MD_GLOBAL_THRESHOLD  + integer + + Sets the global motion detection threshold to be + used with the V4L2_DETECT_MD_MODE_GLOBAL motion detection mode. + + + V4L2_CID_DETECT_MD_THRESHOLD_GRID  + __u16 matrix + + Sets the motion detection thresholds for each cell in the grid. + To be used with the V4L2_DETECT_MD_MODE_THRESHOLD_GRID + motion detection mode. Matrix element (0, 0) represents the cell at the top-left of the + grid. + + + V4L2_CID_DETECT_MD_REGION_GRID  + __u8 matrix + + Sets the motion detection region value for each cell in the grid. + To be used with the V4L2_DETECT_MD_MODE_REGION_GRID + motion detection mode. Matrix element (0, 0) represents the cell at the top-left of the + grid. + + + +
diff --git a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml index b788c72c885e04f16109ea17b2026061fdeb0e9f..f4b61b6ce3c25cc5bc415295f728e58beba2c247 100644 --- a/Documentation/DocBook/media/v4l/dev-raw-vbi.xml +++ b/Documentation/DocBook/media/v4l/dev-raw-vbi.xml @@ -150,9 +150,15 @@ signal. Drivers shall not convert the sample format by software. This is the scanning system line number associated with the first line of the VBI image, of the first and the second field respectively. See and - for valid values. VBI input drivers can -return start values 0 if the hardware cannot reliable identify -scanning lines, VBI acquisition may not require this + for valid values. +The V4L2_VBI_ITU_525_F1_START, +V4L2_VBI_ITU_525_F2_START, +V4L2_VBI_ITU_625_F1_START and +V4L2_VBI_ITU_625_F2_START defines give the start line +numbers for each field for each 525 or 625 line format as a convenience. +Don't forget that ITU line numbering starts at 1, not 0. +VBI input drivers can return start values 0 if the hardware cannot +reliable identify scanning lines, VBI acquisition may not require this information. diff --git a/Documentation/DocBook/media/v4l/dev-sdr.xml b/Documentation/DocBook/media/v4l/dev-sdr.xml index dc14804f54367b325b8fd8b345d751c2f7acaa27..f8903568a243d81dcd2f5e5a76ab40e37b4b4e22 100644 --- a/Documentation/DocBook/media/v4l/dev-sdr.xml +++ b/Documentation/DocBook/media/v4l/dev-sdr.xml @@ -72,9 +72,12 @@ To use the format ioctls applications set the V4L2_BUF_TYPE_SDR_CAPTURE and use the &v4l2-sdr-format; sdr member of the fmt union as needed per the desired operation. -Currently only the pixelformat field of -&v4l2-sdr-format; is used. The content of that field is the V4L2 fourcc code -of the data format. +Currently there is two fields, pixelformat and +buffersize, of struct &v4l2-sdr-format; which are +used. Content of the pixelformat is V4L2 FourCC +code of the data format. The buffersize field is +maximum buffer size in bytes required for data transfer, set by the driver in +order to inform application. @@ -91,9 +94,16 @@ little endian four character code. V4L2 defines SDR formats in . + + __u32 + buffersize + +Maximum size in bytes required for data. Value is set by the driver. + + __u8 - reserved[28] + reserved[24] This array is reserved for future extensions. Drivers and applications must set it to zero. diff --git a/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml b/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml index 548f8ea28dee97862c1c07a4e39947d7ee790160..7a8bf3011ee999861b3c338f1b47316052f99a85 100644 --- a/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml +++ b/Documentation/DocBook/media/v4l/dev-sliced-vbi.xml @@ -185,7 +185,14 @@ tables, sigh. --> Drivers must set service_lines[0][0] and -service_lines[1][0] to zero. +service_lines[1][0] to zero. +The V4L2_VBI_ITU_525_F1_START, +V4L2_VBI_ITU_525_F2_START, +V4L2_VBI_ITU_625_F1_START and +V4L2_VBI_ITU_625_F2_START defines give the start +line numbers for each field for each 525 or 625 line format as a +convenience. Don't forget that ITU line numbering starts at 1, not 0. + __u32 diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml index a086a5db7a185a6c73ccf3ff6dcc0bcfed964e19..e5e8325aa3d781095c0851d8419b57ccdcb5608a 100644 --- a/Documentation/DocBook/media/v4l/io.xml +++ b/Documentation/DocBook/media/v4l/io.xml @@ -870,7 +870,8 @@ should set this to 0. If the application sets this to 0 for an output stream, then bytesused will be set to the size of the plane (see the length field of this struct) - by the driver. + by the driver. Note that the actual image data starts at + data_offset which may not be 0. __u32 @@ -919,6 +920,10 @@ should set this to 0. Offset in bytes to video data in the plane. Drivers must set this field when type refers to an input stream, applications when it refers to an output stream. + Note that data_offset is included in bytesused. + So the size of the image in the plane is + bytesused-data_offset at + offset data_offset from the start of the plane. @@ -1066,7 +1071,7 @@ state, in the application domain so to say. Drivers set or clear this flag when calling the VIDIOC_DQBUF ioctl. It may be set by video capture devices when the buffer contains a compressed image which is a -key frame (or field), &ie; can be decompressed on its own. Also know as +key frame (or field), &ie; can be decompressed on its own. Also known as an I-frame. Applications can set this bit when type refers to an output stream. diff --git a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml index e1c4f8b4c0b36f35f95667b59ac3a06fd79fe328..2aae8e9452a42dd41656f9692e78122343957d21 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-packed-rgb.xml @@ -15,9 +15,6 @@ typical PC graphics frame buffers. They occupy 8, 16, 24 or 32 bits per pixel. These are all packed-pixel formats, meaning all the data for a pixel lie next to each other in memory. - When one of these formats is used, drivers shall report the -colorspace V4L2_COLORSPACE_SRGB. -
Packed RGB Image Formats @@ -130,9 +127,9 @@ colorspace V4L2_COLORSPACE_SRGB. b1 b0 - - V4L2_PIX_FMT_RGB444 - 'R444' + + V4L2_PIX_FMT_ARGB444 + 'AR12' g3 g2 @@ -152,9 +149,31 @@ colorspace V4L2_COLORSPACE_SRGB. r1 r0 - - V4L2_PIX_FMT_RGB555 - 'RGBO' + + V4L2_PIX_FMT_XRGB444 + 'XR12' + + g3 + g2 + g1 + g0 + b3 + b2 + b1 + b0 + + - + - + - + - + r3 + r2 + r1 + r0 + + + V4L2_PIX_FMT_ARGB555 + 'AR15' g2 g1 @@ -174,6 +193,28 @@ colorspace V4L2_COLORSPACE_SRGB. g4 g3 + + V4L2_PIX_FMT_XRGB555 + 'XR15' + + g2 + g1 + g0 + b4 + b3 + b2 + b1 + b0 + + - + r4 + r3 + r2 + r1 + r0 + g4 + g3 + V4L2_PIX_FMT_RGB565 'RGBP' @@ -341,9 +382,9 @@ colorspace V4L2_COLORSPACE_SRGB. b1 b0 - - V4L2_PIX_FMT_BGR32 - 'BGR4' + + V4L2_PIX_FMT_ABGR32 + 'AR24' b7 b6 @@ -381,9 +422,49 @@ colorspace V4L2_COLORSPACE_SRGB. a1 a0 - - V4L2_PIX_FMT_RGB32 - 'RGB4' + + V4L2_PIX_FMT_XBGR32 + 'XR24' + + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + + - + - + - + - + - + - + - + - + + + V4L2_PIX_FMT_ARGB32 + 'AX24' a7 a6 @@ -421,18 +502,76 @@ colorspace V4L2_COLORSPACE_SRGB. b1 b0 + + V4L2_PIX_FMT_XRGB32 + 'BX24' + + - + - + - + - + - + - + - + - + + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 +
- Bit 7 is the most significant bit. The value of the a = alpha -bits is undefined when reading from the driver, ignored when writing -to the driver, except when alpha blending has been negotiated for a -Video Overlay or -Video Output Overlay or when the alpha component has been configured -for a Video Capture by means of V4L2_CID_ALPHA_COMPONENT - control. + Bit 7 is the most significant bit. + + The usage and value of the alpha bits (a) in the ARGB and ABGR formats + (collectively referred to as alpha formats) depend on the device type and + hardware operation. Capture devices + (including capture queues of mem-to-mem devices) fill the alpha component in + memory. When the device outputs an alpha channel the alpha component will + have a meaningful value. Otherwise, when the device doesn't output an alpha + channel but can set the alpha bit to a user-configurable value, the V4L2_CID_ALPHA_COMPONENT + control is used to specify that alpha value, and the alpha component + of all pixels will be set to the value specified by that control. Otherwise + a corresponding format without an alpha component (XRGB or XBGR) must be + used instead of an alpha format. + + Output devices (including output queues + of mem-to-mem devices and video output overlay + devices) read the alpha component from memory. When the device processes the + alpha channel the alpha component must be filled with meaningful values by + applications. Otherwise a corresponding format without an alpha component + (XRGB or XBGR) must be used instead of an alpha format. + + The XRGB and XBGR formats contain undefined bits (-). Applications, + devices and drivers must ignore those bits, for both capture and output + devices. <constant>V4L2_PIX_FMT_BGR24</constant> 4 × 4 pixel @@ -512,6 +651,239 @@ image + Formats defined in are + deprecated and must not be used by new drivers. They are documented here for + reference. The meaning of their alpha bits (a) is ill-defined and + interpreted as in either the corresponding ARGB or XRGB format, depending on + the driver. + + + Deprecated Packed RGB Image Formats + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + Identifier + Code +   + Byte 0 in memory + Byte 1 + Byte 2 + Byte 3 + + +   +   + Bit + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 +   + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 +   + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 +   + 7 + 6 + 5 + 4 + 3 + 2 + 1 + 0 + + + + + V4L2_PIX_FMT_RGB444 + 'R444' + + g3 + g2 + g1 + g0 + b3 + b2 + b1 + b0 + + a3 + a2 + a1 + a0 + r3 + r2 + r1 + r0 + + + V4L2_PIX_FMT_RGB555 + 'RGBO' + + g2 + g1 + g0 + b4 + b3 + b2 + b1 + b0 + + a + r4 + r3 + r2 + r1 + r0 + g4 + g3 + + + V4L2_PIX_FMT_BGR32 + 'BGR4' + + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + + a7 + a6 + a5 + a4 + a3 + a2 + a1 + a0 + + + V4L2_PIX_FMT_RGB32 + 'RGB4' + + a7 + a6 + a5 + a4 + a3 + a2 + a1 + a0 + + r7 + r6 + r5 + r4 + r3 + r2 + r1 + r0 + + g7 + g6 + g5 + g4 + g3 + g2 + g1 + g0 + + b7 + b6 + b5 + b4 + b3 + b2 + b1 + b0 + + + +
+ A test utility to determine which RGB formats a driver actually supports is available from the LinuxTV v4l-dvb repository. See &v4l-dvb; for access instructions. diff --git a/Documentation/DocBook/media/v4l/pixfmt-sdr-cs08.xml b/Documentation/DocBook/media/v4l/pixfmt-sdr-cs08.xml new file mode 100644 index 0000000000000000000000000000000000000000..6118d8f7a20c5e05c48f6a1f9e4ba965f0805745 --- /dev/null +++ b/Documentation/DocBook/media/v4l/pixfmt-sdr-cs08.xml @@ -0,0 +1,44 @@ + + + V4L2_SDR_FMT_CS8 ('CS08') + &manvol; + + + + V4L2_SDR_FMT_CS8 + + Complex signed 8-bit IQ sample + + + Description + +This format contains sequence of complex number samples. Each complex number +consist two parts, called In-phase and Quadrature (IQ). Both I and Q are +represented as a 8 bit signed number. I value comes first and Q value after +that. + + + <constant>V4L2_SDR_FMT_CS8</constant> 1 sample + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + I'0 + + + start + 1: + Q'0 + + + + + + + + + diff --git a/Documentation/DocBook/media/v4l/pixfmt-sdr-cs14le.xml b/Documentation/DocBook/media/v4l/pixfmt-sdr-cs14le.xml new file mode 100644 index 0000000000000000000000000000000000000000..e4b494ce136952cbeee2f1a42622e6c533dae725 --- /dev/null +++ b/Documentation/DocBook/media/v4l/pixfmt-sdr-cs14le.xml @@ -0,0 +1,47 @@ + + + V4L2_SDR_FMT_CS14LE ('CS14') + &manvol; + + + + V4L2_SDR_FMT_CS14LE + + Complex signed 14-bit little endian IQ sample + + + Description + +This format contains sequence of complex number samples. Each complex number +consist two parts, called In-phase and Quadrature (IQ). Both I and Q are +represented as a 14 bit signed little endian number. I value comes first +and Q value after that. 14 bit value is stored in 16 bit space with unused +high bits padded with 0. + + + <constant>V4L2_SDR_FMT_CS14LE</constant> 1 sample + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + I'0[7:0] + I'0[13:8] + + + start + 2: + Q'0[7:0] + Q'0[13:8] + + + + + + + + + diff --git a/Documentation/DocBook/media/v4l/pixfmt-sdr-ru12le.xml b/Documentation/DocBook/media/v4l/pixfmt-sdr-ru12le.xml new file mode 100644 index 0000000000000000000000000000000000000000..3df076b99f941ca2d199078bee8d276b940eda8a --- /dev/null +++ b/Documentation/DocBook/media/v4l/pixfmt-sdr-ru12le.xml @@ -0,0 +1,40 @@ + + + V4L2_SDR_FMT_RU12LE ('RU12') + &manvol; + + + + V4L2_SDR_FMT_RU12LE + + Real unsigned 12-bit little endian sample + + + Description + +This format contains sequence of real number samples. Each sample is +represented as a 12 bit unsigned little endian number. Sample is stored +in 16 bit space with unused high bits padded with 0. + + + <constant>V4L2_SDR_FMT_RU12LE</constant> 1 sample + + Byte Order. + Each cell is one byte. + + + + + + start + 0: + I'0[7:0] + I'0[11:8] + + + + + + + + + diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml index 9ba4fb690bc0caa059f46fd092dc0e2b5d11648e..96947f17fca11a5646b62ad1244984aa0fddac69 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-srggb12.xml @@ -18,7 +18,7 @@ Description The following four pixel formats are raw sRGB / Bayer formats with -12 bits per colour. Each colour component is stored in a 16-bit word, with 6 +12 bits per colour. Each colour component is stored in a 16-bit word, with 4 unused high bits filled with zeros. Each n-pixel row contains n/2 green samples and n/2 blue or red samples, with alternating red and blue rows. Bytes are stored in memory in little endian order. They are conventionally described diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml index 91dcbc84f3f8502c298da9f248d09cee4b2b7c99..df5b23d4655231286c11f83e779922215acfedea 100644 --- a/Documentation/DocBook/media/v4l/pixfmt.xml +++ b/Documentation/DocBook/media/v4l/pixfmt.xml @@ -112,9 +112,34 @@ see . __u32 priv - Reserved for custom (driver defined) additional -information about formats. When not used drivers and applications must -set this field to zero. + This field indicates whether the remaining fields of the +v4l2_pix_format structure, also called the extended +fields, are valid. When set to V4L2_PIX_FMT_PRIV_MAGIC, it +indicates that the extended fields have been correctly initialized. When set to +any other value it indicates that the extended fields contain undefined values. + +Applications that wish to use the pixel format extended fields must first +ensure that the feature is supported by querying the device for the +V4L2_CAP_EXT_PIX_FORMAT +capability. If the capability isn't set the pixel format extended fields are not +supported and using the extended fields will lead to undefined results. +To use the extended fields, applications must set the +priv field to +V4L2_PIX_FMT_PRIV_MAGIC, initialize all the extended fields +and zero the unused bytes of the v4l2_format +raw_data field. +When the priv field isn't set to +V4L2_PIX_FMT_PRIV_MAGIC drivers must act as if all the +extended fields were set to zero. On return drivers must set the +priv field to +V4L2_PIX_FMT_PRIV_MAGIC and all the extended fields to +applicable values. + + + __u32 + flags + Flags set by the application or driver, see . @@ -201,9 +226,15 @@ codes can be used. and the number of valid entries in the plane_fmt array. + + __u8 + flags + Flags set by the application or driver, see . + __u8 - reserved[11] + reserved[10] Reserved for future extensions. Should be zeroed by the application. @@ -248,7 +279,7 @@ has just as many pad bytes after it as the other rows. In V4L2 each format has an identifier which looks like PIX_FMT_XXX, defined in the videodev.h header file. These identifiers +linkend="videodev">videodev2.h header file. These identifiers represent four character (FourCC) codes which are also listed below, however they are not the same as those used in the Windows world. @@ -828,6 +859,9 @@ interface only. &sub-sdr-cu08; &sub-sdr-cu16le; + &sub-sdr-cs08; + &sub-sdr-cs14le; + &sub-sdr-ru12le; @@ -1060,4 +1094,21 @@ concatenated to form the JPEG stream. + + + Format Flags + + &cs-def; + + + V4L2_PIX_FMT_FLAG_PREMUL_ALPHA + 0x00000001 + The color values are premultiplied by the alpha channel +value. For example, if a light blue pixel with 50% transparency was described by +RGBA values (128, 192, 255, 128), the same pixel described with premultiplied +colors would be described by RGBA values (64, 96, 128, 128) + + + +
diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml index 4c238ce068b0aa238155037be481336d800b8c78..28cbded766c93f6b333556249b1eaa782dc5ced4 100644 --- a/Documentation/DocBook/media/v4l/selection-api.xml +++ b/Documentation/DocBook/media/v4l/selection-api.xml @@ -86,47 +86,47 @@ selection targets available for a video capture device. It is recommended to configure the cropping targets before to the composing targets. The range of coordinates of the top left corner, width and height of -areas that can be sampled is given by the V4L2_SEL_TGT_CROP_BOUNDS - target. It is recommended for the driver developers to put the -top/left corner at position (0,0) . The rectangle's +areas that can be sampled is given by the V4L2_SEL_TGT_CROP_BOUNDS +target. It is recommended for the driver developers to put the +top/left corner at position (0,0). The rectangle's coordinates are expressed in pixels. The top left corner, width and height of the source rectangle, that is -the area actually sampled, is given by the V4L2_SEL_TGT_CROP - target. It uses the same coordinate system as -V4L2_SEL_TGT_CROP_BOUNDS . The active cropping area must lie -completely inside the capture boundaries. The driver may further adjust the -requested size and/or position according to hardware limitations. +the area actually sampled, is given by the V4L2_SEL_TGT_CROP +target. It uses the same coordinate system as V4L2_SEL_TGT_CROP_BOUNDS. +The active cropping area must lie completely inside the capture boundaries. The +driver may further adjust the requested size and/or position according to hardware +limitations. Each capture device has a default source rectangle, given by the - V4L2_SEL_TGT_CROP_DEFAULT target. This rectangle shall +V4L2_SEL_TGT_CROP_DEFAULT target. This rectangle shall over what the driver writer considers the complete picture. Drivers shall set the active crop rectangle to the default when the driver is first loaded, but not later. The composing targets refer to a memory buffer. The limits of composing -coordinates are obtained using V4L2_SEL_TGT_COMPOSE_BOUNDS -. All coordinates are expressed in pixels. The rectangle's top/left -corner must be located at position (0,0) . The width and -height are equal to the image size set by VIDIOC_S_FMT . +coordinates are obtained using V4L2_SEL_TGT_COMPOSE_BOUNDS. +All coordinates are expressed in pixels. The rectangle's top/left +corner must be located at position (0,0). The width and +height are equal to the image size set by VIDIOC_S_FMT. The part of a buffer into which the image is inserted by the hardware is -controlled by the V4L2_SEL_TGT_COMPOSE target. +controlled by the V4L2_SEL_TGT_COMPOSE target. The rectangle's coordinates are also expressed in the same coordinate system as the bounds rectangle. The composing rectangle must lie completely inside bounds rectangle. The driver must adjust the composing rectangle to fit to the bounding limits. Moreover, the driver can perform other adjustments according to hardware limitations. The application can control rounding behaviour using - constraint flags . + constraint flags. For capture devices the default composing rectangle is queried using - V4L2_SEL_TGT_COMPOSE_DEFAULT . It is usually equal to the +V4L2_SEL_TGT_COMPOSE_DEFAULT. It is usually equal to the bounding rectangle. The part of a buffer that is modified by the hardware is given by - V4L2_SEL_TGT_COMPOSE_PADDED . It contains all pixels -defined using V4L2_SEL_TGT_COMPOSE plus all +V4L2_SEL_TGT_COMPOSE_PADDED. It contains all pixels +defined using V4L2_SEL_TGT_COMPOSE plus all padding data modified by hardware during insertion process. All pixels outside this rectangle must not be changed by the hardware. The content of pixels that lie inside the padded area but outside active area is @@ -140,52 +140,51 @@ where the rubbish pixels are located and remove them if needed. Configuration of video output For output devices targets and ioctls are used similarly to the video -capture case. The composing rectangle refers to the +capture case. The composing rectangle refers to the insertion of an image into a video signal. The cropping rectangles refer to a memory buffer. It is recommended to configure the composing targets before to the cropping targets. The cropping targets refer to the memory buffer that contains an image to be inserted into a video signal or graphical screen. The limits of cropping -coordinates are obtained using V4L2_SEL_TGT_CROP_BOUNDS . +coordinates are obtained using V4L2_SEL_TGT_CROP_BOUNDS. All coordinates are expressed in pixels. The top/left corner is always point - (0,0) . The width and height is equal to the image size -specified using VIDIOC_S_FMT ioctl. +(0,0). The width and height is equal to the image size +specified using VIDIOC_S_FMT ioctl. The top left corner, width and height of the source rectangle, that is the area from which image date are processed by the hardware, is given by the - V4L2_SEL_TGT_CROP . Its coordinates are expressed +V4L2_SEL_TGT_CROP. Its coordinates are expressed in in the same coordinate system as the bounds rectangle. The active cropping area must lie completely inside the crop boundaries and the driver may further adjust the requested size and/or position according to hardware limitations. For output devices the default cropping rectangle is queried using - V4L2_SEL_TGT_CROP_DEFAULT . It is usually equal to the +V4L2_SEL_TGT_CROP_DEFAULT. It is usually equal to the bounding rectangle. The part of a video signal or graphics display where the image is -inserted by the hardware is controlled by -V4L2_SEL_TGT_COMPOSE target. The rectangle's coordinates -are expressed in pixels. The composing rectangle must lie completely inside the -bounds rectangle. The driver must adjust the area to fit to the bounding -limits. Moreover, the driver can perform other adjustments according to -hardware limitations. - -The device has a default composing rectangle, given by the -V4L2_SEL_TGT_COMPOSE_DEFAULT target. This rectangle shall cover what +inserted by the hardware is controlled by V4L2_SEL_TGT_COMPOSE +target. The rectangle's coordinates are expressed in pixels. The composing +rectangle must lie completely inside the bounds rectangle. The driver must +adjust the area to fit to the bounding limits. Moreover, the driver can +perform other adjustments according to hardware limitations. + +The device has a default composing rectangle, given by the +V4L2_SEL_TGT_COMPOSE_DEFAULT target. This rectangle shall cover what the driver writer considers the complete picture. It is recommended for the -driver developers to put the top/left corner at position (0,0) -. Drivers shall set the active composing rectangle to the default +driver developers to put the top/left corner at position (0,0). +Drivers shall set the active composing rectangle to the default one when the driver is first loaded. The devices may introduce additional content to video signal other than an image from memory buffers. It includes borders around an image. However, such a padded area is driver-dependent feature not covered by this document. Driver developers are encouraged to keep padded rectangle equal to active one. -The padded target is accessed by the V4L2_SEL_TGT_COMPOSE_PADDED - identifier. It must contain all pixels from the -V4L2_SEL_TGT_COMPOSE target. +The padded target is accessed by the V4L2_SEL_TGT_COMPOSE_PADDED +identifier. It must contain all pixels from the V4L2_SEL_TGT_COMPOSE +target. @@ -194,8 +193,8 @@ V4L2_SEL_TGT_COMPOSE target. Scaling control An application can detect if scaling is performed by comparing the width -and the height of rectangles obtained using V4L2_SEL_TGT_CROP - and V4L2_SEL_TGT_COMPOSE targets. If +and the height of rectangles obtained using V4L2_SEL_TGT_CROP +and V4L2_SEL_TGT_COMPOSE targets. If these are not equal then the scaling is applied. The application can compute the scaling ratios using these values. @@ -208,7 +207,7 @@ the scaling ratios using these values. Comparison with old cropping API The selection API was introduced to cope with deficiencies of previous - API , that was designed to control simple capture + API, that was designed to control simple capture devices. Later the cropping API was adopted by video output drivers. The ioctls are used to select a part of the display were the video signal is inserted. It should be considered as an API abuse because the described operation is @@ -220,7 +219,7 @@ part of an image by abusing V4L2 API. Cropping a smaller image from a larger one is achieved by setting the field &v4l2-pix-format;::bytesperline. Introducing an image offsets could be done by modifying field &v4l2-buffer;::m_userptr -before calling VIDIOC_QBUF . Those +before calling VIDIOC_QBUF. Those operations should be avoided because they are not portable (endianness), and do not work for macroblock and Bayer formats and mmap buffers. The selection API deals with configuration of buffer cropping/composing in a clear, intuitive and @@ -229,7 +228,7 @@ and constraints flags are introduced. Finally, &v4l2-crop; and &v4l2-cropcap; have no reserved fields. Therefore there is no way to extend their functionality. The new &v4l2-selection; provides a lot of place for future extensions. Driver developers are encouraged to implement only selection API. -The former cropping API would be simulated using the new one. +The former cropping API would be simulated using the new one. @@ -238,9 +237,9 @@ The former cropping API would be simulated using the new one. Resetting the cropping parameters - (A video capture device is assumed; change -V4L2_BUF_TYPE_VIDEO_CAPTURE for other devices; change target to - V4L2_SEL_TGT_COMPOSE_* family to configure composing + (A video capture device is assumed; change +V4L2_BUF_TYPE_VIDEO_CAPTURE for other devices; change target to +V4L2_SEL_TGT_COMPOSE_* family to configure composing area) @@ -292,8 +291,8 @@ area) Querying for scaling factors - A video output device is assumed; change -V4L2_BUF_TYPE_VIDEO_OUTPUT for other devices + A video output device is assumed; change +V4L2_BUF_TYPE_VIDEO_OUTPUT for other devices &v4l2-selection; compose = { diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index b445161b912c4329079bada5d11f1e1ab3ceede4..f2f81f06a17ba54718b693c54d024a6640576a5f 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -151,6 +151,14 @@ structs, ioctls) must be noted in more detail in the history chapter (compat.xml), along with the possible impact on existing drivers and applications. --> + + 3.16 + 2014-05-27 + lp + Extended &v4l2-pix-format;. Added format flags. + + + 3.15 2014-02-03 diff --git a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml index 820f86e8744b356ae5a59144e25d4ee5edf57900..cb7732582f0365861ccf14f25a3a83ecfdb5d05e 100644 --- a/Documentation/DocBook/media/v4l/vidioc-dqevent.xml +++ b/Documentation/DocBook/media/v4l/vidioc-dqevent.xml @@ -92,6 +92,18 @@ frame_sync Event data for event V4L2_EVENT_FRAME_SYNC. + + + &v4l2-event-motion-det; + motion_det + Event data for event V4L2_EVENT_MOTION_DET. + + + + &v4l2-event-src-change; + src_change + Event data for event V4L2_EVENT_SOURCE_CHANGE. + __u8 @@ -258,6 +270,44 @@ + + struct <structname>v4l2_event_motion_det</structname> + + &cs-str; + + + __u32 + flags + + Currently only one flag is available: if V4L2_EVENT_MD_FL_HAVE_FRAME_SEQ + is set, then the frame_sequence field is valid, + otherwise that field should be ignored. + + + + __u32 + frame_sequence + + The sequence number of the frame being received. Only valid if the + V4L2_EVENT_MD_FL_HAVE_FRAME_SEQ flag was set. + + + + __u32 + region_mask + + The bitmask of the regions that reported motion. There is at least one + region. If this field is 0, then no motion was detected at all. + If there is no V4L2_CID_DETECT_MD_REGION_GRID control + (see ) to assign a different region + to each cell in the motion detection grid, then that all cells + are automatically assigned to the default region 0. + + + + +
+ Changes diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml index e9f6735c08233bc360339bf0171504f87d652091..c5bdbfcc42b310c576e91938b79dcfa3e44bf4de 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml @@ -72,23 +72,30 @@ initialize the id, size and reserved2 fields of each &v4l2-ext-control; and call the VIDIOC_G_EXT_CTRLS ioctl. String controls controls -must also set the string field. +must also set the string field. Controls +of compound types (V4L2_CTRL_FLAG_HAS_PAYLOAD is set) +must set the ptr field. If the size is too small to receive the control result (only relevant for pointer-type controls like strings), then the driver will set size to a valid value and return an &ENOSPC;. You should re-allocate the -string memory to this new size and try again. It is possible that the -same issue occurs again if the string has grown in the meantime. It is +memory to this new size and try again. For the string type it is possible that +the same issue occurs again if the string has grown in the meantime. It is recommended to call &VIDIOC-QUERYCTRL; first and use maximum+1 as the new size value. It is guaranteed that that is sufficient memory. + N-dimensional arrays are set and retrieved row-by-row. You cannot set a partial +array, all elements have to be set or retrieved. The total size is calculated +as elems * elem_size. +These values can be obtained by calling &VIDIOC-QUERY-EXT-CTRL;. + To change the value of a set of controls applications initialize the id, size, reserved2 and -value/string fields of each &v4l2-ext-control; and +value/value64/string/ptr fields of each &v4l2-ext-control; and call the VIDIOC_S_EXT_CTRLS ioctl. The controls will only be set if all control values are valid. @@ -96,7 +103,7 @@ valid. To check if a set of controls have correct values applications initialize the id, size, reserved2 and -value/string fields of each &v4l2-ext-control; and +value/value64/string/ptr fields of each &v4l2-ext-control; and call the VIDIOC_TRY_EXT_CTRLS ioctl. It is up to the driver whether wrong values are automatically adjusted to a valid value or if an error is returned. @@ -158,19 +165,47 @@ applications must set the array to zero. __s32 value - New value or current value. + New value or current value. Valid if this control is not of +type V4L2_CTRL_TYPE_INTEGER64 and +V4L2_CTRL_FLAG_HAS_PAYLOAD is not set. __s64 value64 - New value or current value. + New value or current value. Valid if this control is of +type V4L2_CTRL_TYPE_INTEGER64 and +V4L2_CTRL_FLAG_HAS_PAYLOAD is not set. char * string - A pointer to a string. + A pointer to a string. Valid if this control is of +type V4L2_CTRL_TYPE_STRING. + + + + __u8 * + p_u8 + A pointer to a matrix control of unsigned 8-bit values. +Valid if this control is of type V4L2_CTRL_TYPE_U8. + + + + __u16 * + p_u16 + A pointer to a matrix control of unsigned 16-bit values. +Valid if this control is of type V4L2_CTRL_TYPE_U16. + + + + void * + ptr + A pointer to a compound type which can be an N-dimensional array and/or a +compound type (the control's type is >= V4L2_CTRL_COMPOUND_TYPES). +Valid if V4L2_CTRL_FLAG_HAS_PAYLOAD is set for this control. + diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml index 7c63815e7afd0eb964a1848513dea5be14eb677e..20460730b02ca242e0ba5d096761ac00ea8239af 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml @@ -152,13 +152,10 @@ a valid base address, so applications can find the corresponding Linux framebuffer device (see ). - &v4l2-pix-format; + struct fmt - Layout of the frame buffer. The -v4l2_pix_format structure is defined in , for clarification the fields and acceptable values - are listed below: + Layout of the frame buffer. @@ -276,9 +273,8 @@ see . __u32 priv - Reserved for additional information about custom -(driver defined) formats. When not used drivers and applications must -set this field to zero. + Reserved. Drivers and applications must set this field to +zero. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml index b11ec75e21a10ddff0ea99f16897ec4d660179be..9c04ac8661b10eed113e74fb57d7a14b2fb792b1 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml @@ -58,17 +58,16 @@ The ioctls are used to query and configure selection rectangles. - To query the cropping (composing) rectangle set &v4l2-selection; +To query the cropping (composing) rectangle set &v4l2-selection; type field to the respective buffer type. -Do not use multiplanar buffers. Use V4L2_BUF_TYPE_VIDEO_CAPTURE - instead of V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE -. Use V4L2_BUF_TYPE_VIDEO_OUTPUT instead of - V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE . The next step is +Do not use multiplanar buffers. Use V4L2_BUF_TYPE_VIDEO_CAPTURE +instead of V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE. Use +V4L2_BUF_TYPE_VIDEO_OUTPUT instead of +V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE. The next step is setting the value of &v4l2-selection; target field -to V4L2_SEL_TGT_CROP ( -V4L2_SEL_TGT_COMPOSE ). Please refer to table or for additional -targets. The flags and reserved +to V4L2_SEL_TGT_CROP (V4L2_SEL_TGT_COMPOSE). +Please refer to table or +for additional targets. The flags and reserved fields of &v4l2-selection; are ignored and they must be filled with zeros. The driver fills the rest of the structure or returns &EINVAL; if incorrect buffer type or target was used. If cropping @@ -77,19 +76,18 @@ always equal to the bounds rectangle. Finally, the &v4l2-rect; r rectangle is filled with the current cropping (composing) coordinates. The coordinates are expressed in driver-dependent units. The only exception are rectangles for images in raw formats, whose -coordinates are always expressed in pixels. +coordinates are always expressed in pixels. - To change the cropping (composing) rectangle set the &v4l2-selection; +To change the cropping (composing) rectangle set the &v4l2-selection; type field to the respective buffer type. Do not -use multiplanar buffers. Use V4L2_BUF_TYPE_VIDEO_CAPTURE - instead of V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE -. Use V4L2_BUF_TYPE_VIDEO_OUTPUT instead of - V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE . The next step is +use multiplanar buffers. Use V4L2_BUF_TYPE_VIDEO_CAPTURE +instead of V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE. Use +V4L2_BUF_TYPE_VIDEO_OUTPUT instead of +V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE. The next step is setting the value of &v4l2-selection; target to -V4L2_SEL_TGT_CROP ( -V4L2_SEL_TGT_COMPOSE ). Please refer to table or for additional -targets. The &v4l2-rect; r rectangle need to be +V4L2_SEL_TGT_CROP (V4L2_SEL_TGT_COMPOSE). +Please refer to table or +for additional targets. The &v4l2-rect; r rectangle need to be set to the desired active area. Field &v4l2-selection; reserved is ignored and must be filled with zeros. The driver may adjust coordinates of the requested rectangle. An application may @@ -149,8 +147,8 @@ On success the &v4l2-rect; r field contains the adjusted rectangle. When the parameters are unsuitable the application may modify the cropping (composing) or image parameters and repeat the cycle until satisfactory parameters have been negotiated. If constraints flags have to be -violated at then ERANGE is returned. The error indicates that there -exist no rectangle that satisfies the constraints. +violated at then ERANGE is returned. The error indicates that there +exist no rectangle that satisfies the constraints. Selection targets and flags are documented in . diff --git a/Documentation/DocBook/media/v4l/vidioc-querycap.xml b/Documentation/DocBook/media/v4l/vidioc-querycap.xml index 370d49d6fb64e80077f833ff428cd4c33804af74..d0c5e604f014f3080966510d39cf7877e018d2be 100644 --- a/Documentation/DocBook/media/v4l/vidioc-querycap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-querycap.xml @@ -300,6 +300,12 @@ modulator programming see 0x00100000 The device supports the SDR Capture interface. + + + V4L2_CAP_EXT_PIX_FORMAT + 0x00200000 + The device supports the &v4l2-pix-format; extended +fields. V4L2_CAP_READWRITE diff --git a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml index e6645b9965580d5f93e7dd379dfa97e496a14a2a..2bd98fd7a4e51ac542d423ab74e335b8de0a9e7a 100644 --- a/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml +++ b/Documentation/DocBook/media/v4l/vidioc-queryctrl.xml @@ -1,11 +1,12 @@ - ioctl VIDIOC_QUERYCTRL, VIDIOC_QUERYMENU + ioctl VIDIOC_QUERYCTRL, VIDIOC_QUERY_EXT_CTRL, VIDIOC_QUERYMENU &manvol; VIDIOC_QUERYCTRL + VIDIOC_QUERY_EXT_CTRL VIDIOC_QUERYMENU Enumerate controls and menu control items @@ -19,6 +20,14 @@ struct v4l2_queryctrl *argp + + + int ioctl + int fd + int request + struct v4l2_query_ext_ctrl *argp + + int ioctl @@ -42,7 +51,7 @@ request - VIDIOC_QUERYCTRL, VIDIOC_QUERYMENU + VIDIOC_QUERYCTRL, VIDIOC_QUERY_EXT_CTRL, VIDIOC_QUERYMENU @@ -67,7 +76,7 @@ structure. The driver fills the rest of the structure or returns an VIDIOC_QUERYCTRL with successive id values starting from V4L2_CID_BASE up to and exclusive -V4L2_CID_BASE_LASTP1. Drivers may return +V4L2_CID_LASTP1. Drivers may return EINVAL if a control in this range is not supported. Further applications can enumerate private controls, which are not defined in this specification, by starting at @@ -89,9 +98,23 @@ prematurely end the enumeration). When the application ORs id with V4L2_CTRL_FLAG_NEXT_CTRL the driver returns the -next supported control, or EINVAL if there is -none. Drivers which do not support this flag yet always return -EINVAL. +next supported non-compound control, or EINVAL +if there is none. In addition, the V4L2_CTRL_FLAG_NEXT_COMPOUND +flag can be specified to enumerate all compound controls (i.e. controls +with type ≥ V4L2_CTRL_COMPOUND_TYPES). Specify both +V4L2_CTRL_FLAG_NEXT_CTRL and +V4L2_CTRL_FLAG_NEXT_COMPOUND in order to enumerate +all controls, compound or not. Drivers which do not support these flags yet +always return EINVAL. + + The VIDIOC_QUERY_EXT_CTRL ioctl was +introduced in order to better support controls that can use compound +types, and to expose additional control information that cannot be +returned in &v4l2-queryctrl; since that structure is full. + + VIDIOC_QUERY_EXT_CTRL is used in the +same way as VIDIOC_QUERYCTRL, except that the +reserved array must be zeroed as well. Additional information is required for menu controls: the names of the menu items. To query them applications set the @@ -142,38 +165,23 @@ string. This information is intended for the user. __s32 minimum Minimum value, inclusive. This field gives a lower -bound for V4L2_CTRL_TYPE_INTEGER controls and the -lowest valid index for V4L2_CTRL_TYPE_MENU controls. -For V4L2_CTRL_TYPE_STRING controls the minimum value -gives the minimum length of the string. This length does not include the terminating -zero. It may not be valid for any other type of control, including -V4L2_CTRL_TYPE_INTEGER64 controls. Note that this is a -signed value. +bound for the control. See &v4l2-ctrl-type; how the minimum value is to +be used for each possible control type. Note that this a signed 32-bit value. __s32 maximum Maximum value, inclusive. This field gives an upper -bound for V4L2_CTRL_TYPE_INTEGER controls and the -highest valid index for V4L2_CTRL_TYPE_MENU -controls. For V4L2_CTRL_TYPE_BITMASK controls it is the -set of usable bits. -For V4L2_CTRL_TYPE_STRING controls the maximum value -gives the maximum length of the string. This length does not include the terminating -zero. It may not be valid for any other type of control, including -V4L2_CTRL_TYPE_INTEGER64 controls. Note that this is a -signed value. +bound for the control. See &v4l2-ctrl-type; how the maximum value is to +be used for each possible control type. Note that this a signed 32-bit value. __s32 step - This field gives a step size for -V4L2_CTRL_TYPE_INTEGER controls. For -V4L2_CTRL_TYPE_STRING controls this field refers to -the string length that has to be a multiple of this step size. -It may not be valid for any other type of control, including -V4L2_CTRL_TYPE_INTEGER64 -controls.Generally drivers should not scale hardware + This field gives a step size for the control. +See &v4l2-ctrl-type; how the step value is to be used for each possible +control type. Note that this an unsigned 32-bit value. +Generally drivers should not scale hardware control values. It may be necessary for example when the name or id imply a particular unit and the hardware actually accepts only multiples of @@ -192,10 +200,11 @@ be always positive. default_value The default value of a V4L2_CTRL_TYPE_INTEGER, -_BOOLEAN or _MENU control. -Not valid for other types of controls. Drivers reset controls only -when the driver is loaded, not later, in particular not when the -func-open; is called. +_BOOLEAN, _BITMASK, +_MENU or _INTEGER_MENU control. +Not valid for other types of controls. +Note that drivers reset controls to their default value only when the +driver is first loaded, never afterwards. __u32 @@ -213,6 +222,126 @@ the array to zero.
+ + struct <structname>v4l2_query_ext_ctrl</structname> + + &cs-str; + + + __u32 + id + Identifies the control, set by the application. See + for predefined IDs. When the ID is ORed +with V4L2_CTRL_FLAG_NEXT_CTRL the driver clears the +flag and returns the first non-compound control with a higher ID. When the +ID is ORed with V4L2_CTRL_FLAG_NEXT_COMPOUND the driver +clears the flag and returns the first compound control with a higher ID. +Set both to get the first control (compound or not) with a higher ID. + + + __u32 + type + Type of control, see . + + + char + name[32] + Name of the control, a NUL-terminated ASCII +string. This information is intended for the user. + + + __s64 + minimum + Minimum value, inclusive. This field gives a lower +bound for the control. See &v4l2-ctrl-type; how the minimum value is to +be used for each possible control type. Note that this a signed 64-bit value. + + + __s64 + maximum + Maximum value, inclusive. This field gives an upper +bound for the control. See &v4l2-ctrl-type; how the maximum value is to +be used for each possible control type. Note that this a signed 64-bit value. + + + __u64 + step + This field gives a step size for the control. +See &v4l2-ctrl-type; how the step value is to be used for each possible +control type. Note that this an unsigned 64-bit value. +Generally drivers should not scale hardware +control values. It may be necessary for example when the +name or id imply +a particular unit and the hardware actually accepts only multiples of +said unit. If so, drivers must take care values are properly rounded +when scaling, such that errors will not accumulate on repeated +read-write cycles.This field gives the smallest change of +an integer control actually affecting hardware. Often the information +is needed when the user can change controls by keyboard or GUI +buttons, rather than a slider. When for example a hardware register +accepts values 0-511 and the driver reports 0-65535, step should be +128. + + + __s64 + default_value + The default value of a +V4L2_CTRL_TYPE_INTEGER, _INTEGER64, +_BOOLEAN, _BITMASK, +_MENU, _INTEGER_MENU, +_U8 or _U16 control. +Not valid for other types of controls. +Note that drivers reset controls to their default value only when the +driver is first loaded, never afterwards. + + + + __u32 + flags + Control flags, see . + + + __u32 + elem_size + The size in bytes of a single element of the array. +Given a char pointer p to a 3-dimensional array you can find the +position of cell (z, y, x) as follows: +p + ((z * dims[1] + y) * dims[0] + x) * elem_size. elem_size +is always valid, also when the control isn't an array. For string controls +elem_size is equal to maximum + 1. + + + + __u32 + elems + The number of elements in the N-dimensional array. If this control +is not an array, then elems is 1. The elems +field can never be 0. + + + __u32 + nr_of_dims + The number of dimension in the N-dimensional array. If this control +is not an array, then this field is 0. + + + __u32 + dims[V4L2_CTRL_MAX_DIMS] + The size of each dimension. The first nr_of_dims +elements of this array must be non-zero, all remaining elements must be zero. + + + __u32 + reserved[32] + Reserved for future extensions. Applications and drivers +must set the array to zero. + + + +
+ struct <structname>v4l2_querymenu</structname> @@ -347,11 +476,14 @@ Drivers must ignore the value passed with V4L2_CTRL_TYPE_INTEGER64 - n/a - n/a - n/a + any + any + any A 64-bit integer valued control. Minimum, maximum -and step size cannot be queried. +and step size cannot be queried using VIDIOC_QUERYCTRL. +Only VIDIOC_QUERY_EXT_CTRL can retrieve the 64-bit +min/max/step values, they should be interpreted as n/a when using +VIDIOC_QUERYCTRL. V4L2_CTRL_TYPE_STRING @@ -379,6 +511,26 @@ ioctl returns the name of the control class and this control type. Older drivers which do not support this feature return an &EINVAL;. + + V4L2_CTRL_TYPE_U8 + any + any + any + An unsigned 8-bit valued control ranging from minimum to +maximum inclusive. The step value indicates the increment between +values which are actually different on the hardware. + + + + V4L2_CTRL_TYPE_U16 + any + any + any + An unsigned 16-bit valued control ranging from minimum to +maximum inclusive. The step value indicates the increment between +values which are actually different on the hardware. + +
@@ -450,6 +602,14 @@ is in auto-gain mode. In such a case the hardware calculates the gain value base the lighting conditions which can change over time. Note that setting a new value for a volatile control will have no effect. The new value will just be ignored. + + V4L2_CTRL_FLAG_HAS_PAYLOAD + 0x0100 + This control has a pointer type, so its value has to be accessed +using one of the pointer fields of &v4l2-ext-control;. This flag is set for controls +that are an array, string, or have a compound type. In all cases you have to set a +pointer to memory containing the payload of the control. + diff --git a/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml b/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml index 17efa870d4d2a569d54ed18b2b55713dd6bbf1c8..9f6095608837b29085aa49171f544474801d3c6e 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subscribe-event.xml @@ -174,6 +174,14 @@ will have the ORed value of all the events generated. + + V4L2_EVENT_MOTION_DET + 5 + + Triggered whenever the motion detection state for one or more of the regions + changes. This event has a &v4l2-event-motion-det; associated with it. + + V4L2_EVENT_PRIVATE_START 0x08000000 diff --git a/Documentation/PCI/MSI-HOWTO.txt b/Documentation/PCI/MSI-HOWTO.txt index 10a93696e55ad33c821a5466ed813a07e9fb9930..0d920d54536df88b07f5b46637cfa32b5970100e 100644 --- a/Documentation/PCI/MSI-HOWTO.txt +++ b/Documentation/PCI/MSI-HOWTO.txt @@ -576,7 +576,7 @@ Some devices are known to have faulty MSI implementations. Usually this is handled in the individual device driver, but occasionally it's necessary to handle this with a quirk. Some drivers have an option to disable use of MSI. While this is a convenient workaround for the driver author, -it is not good practise, and should not be emulated. +it is not good practice, and should not be emulated. 5.4. Finding why MSIs are disabled on a device diff --git a/Documentation/RCU/whatisRCU.txt b/Documentation/RCU/whatisRCU.txt index 49b8551a3b68e00de3e9819f4a3b20c6cf4b3fa3..e48c57f1943bab162530416afb35f3acdff1729d 100644 --- a/Documentation/RCU/whatisRCU.txt +++ b/Documentation/RCU/whatisRCU.txt @@ -818,7 +818,7 @@ RCU pointer/list update: list_add_tail_rcu list_del_rcu list_replace_rcu - hlist_add_after_rcu + hlist_add_behind_rcu hlist_add_before_rcu hlist_add_head_rcu hlist_del_rcu diff --git a/Documentation/SubmittingDrivers b/Documentation/SubmittingDrivers index 36d16bbf72c6160ac3f679afbe91854978e8194a..31d372609ac00fb715a66174214d10f2ba673520 100644 --- a/Documentation/SubmittingDrivers +++ b/Documentation/SubmittingDrivers @@ -146,10 +146,6 @@ LWN.net: Porting drivers from prior kernels to 2.6: http://lwn.net/Articles/driver-porting/ -KernelTrap: - Occasional Linux kernel articles and developer interviews - http://kerneltrap.org/ - KernelNewbies: Documentation and assistance for new kernel programmers http://kernelnewbies.org/ diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 7e9abb8a276bdb72b88497dde36b5c451353987f..0a523c9a5ff4ec2fee6eefd5e5acef87944460a2 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -84,18 +84,42 @@ is another popular alternative. 2) Describe your changes. -Describe the technical detail of the change(s) your patch includes. - -Be as specific as possible. The WORST descriptions possible include -things like "update driver X", "bug fix for driver X", or "this patch -includes updates for subsystem X. Please apply." +Describe your problem. Whether your patch is a one-line bug fix or +5000 lines of a new feature, there must be an underlying problem that +motivated you to do this work. Convince the reviewer that there is a +problem worth fixing and that it makes sense for them to read past the +first paragraph. + +Describe user-visible impact. Straight up crashes and lockups are +pretty convincing, but not all bugs are that blatant. Even if the +problem was spotted during code review, describe the impact you think +it can have on users. Keep in mind that the majority of Linux +installations run kernels from secondary stable trees or +vendor/product-specific trees that cherry-pick only specific patches +from upstream, so include anything that could help route your change +downstream: provoking circumstances, excerpts from dmesg, crash +descriptions, performance regressions, latency spikes, lockups, etc. + +Quantify optimizations and trade-offs. If you claim improvements in +performance, memory consumption, stack footprint, or binary size, +include numbers that back them up. But also describe non-obvious +costs. Optimizations usually aren't free but trade-offs between CPU, +memory, and readability; or, when it comes to heuristics, between +different workloads. Describe the expected downsides of your +optimization so that the reviewer can weigh costs against benefits. + +Once the problem is established, describe what you are actually doing +about it in technical detail. It's important to describe the change +in plain English for the reviewer to verify that the code is behaving +as you intend it to. The maintainer will thank you if you write your patch description in a form which can be easily pulled into Linux's source code management system, git, as a "commit log". See #15, below. -If your description starts to get long, that's a sign that you probably -need to split up your patch. See #3, next. +Solve only one problem per patch. If your description starts to get +long, that's a sign that you probably need to split up your patch. +See #3, next. When you submit or resubmit a patch or patch series, include the complete patch description and justification for it. Don't just @@ -396,13 +420,13 @@ you are responsible for last-minute changes. Example : [lucky@maintainer.example.org: struct foo moved from foo.c to foo.h] Signed-off-by: Lucky K Maintainer -This practise is particularly helpful if you maintain a stable branch and +This practice is particularly helpful if you maintain a stable branch and want at the same time to credit the author, track changes, merge the fix, and protect the submitter from complaints. Note that under no circumstances can you change the author's identity (the From header), as it is the one which appears in the changelog. -Special note to back-porters: It seems to be a common and useful practise +Special note to back-porters: It seems to be a common and useful practice to insert an indication of the origin of a patch at the top of the commit message (just after the subject line) to facilitate tracking. For instance, here's what we see in 2.6-stable : diff --git a/Documentation/arm/CCN.txt b/Documentation/arm/CCN.txt new file mode 100644 index 0000000000000000000000000000000000000000..0632b3aad83e7068f663964c77870b9e54cf6826 --- /dev/null +++ b/Documentation/arm/CCN.txt @@ -0,0 +1,52 @@ +ARM Cache Coherent Network +========================== + +CCN-504 is a ring-bus interconnect consisting of 11 crosspoints +(XPs), with each crosspoint supporting up to two device ports, +so nodes (devices) 0 and 1 are connected to crosspoint 0, +nodes 2 and 3 to crosspoint 1 etc. + +PMU (perf) driver +----------------- + +The CCN driver registers a perf PMU driver, which provides +description of available events and configuration options +in sysfs, see /sys/bus/event_source/devices/ccn*. + +The "format" directory describes format of the config, config1 +and config2 fields of the perf_event_attr structure. The "events" +directory provides configuration templates for all documented +events, that can be used with perf tool. For example "xp_valid_flit" +is an equivalent of "type=0x8,event=0x4". Other parameters must be +explicitly specified. For events originating from device, "node" +defines its index. All crosspoint events require "xp" (index), +"port" (device port number) and "vc" (virtual channel ID) and +"dir" (direction). Watchpoints (special "event" value 0xfe) also +require comparator values ("cmp_l" and "cmp_h") and "mask", being +index of the comparator mask. + +Masks are defined separately from the event description +(due to limited number of the config values) in the "cmp_mask" +directory, with first 8 configurable by user and additional +4 hardcoded for the most frequent use cases. + +Cycle counter is described by a "type" value 0xff and does +not require any other settings. + +Example of perf tool use: + +/ # perf list | grep ccn + ccn/cycles/ [Kernel PMU event] +<...> + ccn/xp_valid_flit/ [Kernel PMU event] +<...> + +/ # perf stat -C 0 -e ccn/cycles/,ccn/xp_valid_flit,xp=1,port=0,vc=1,dir=1/ \ + sleep 1 + +The driver does not support sampling, therefore "perf record" will +not work. Also notice that only single cpu is being selected +("-C 0") - this is because perf framework does not support +"non-CPU related" counters (yet?) so system-wide session ("-a") +would try (and in most cases fail) to set up the same event +per each CPU. diff --git a/Documentation/arm/Marvell/README b/Documentation/arm/Marvell/README index 2cce5401e323ff0bc88ed98557babbd2a963234e..4dc66c173e10914ce0dddb7d77d4e9abb3541f78 100644 --- a/Documentation/arm/Marvell/README +++ b/Documentation/arm/Marvell/README @@ -53,8 +53,8 @@ Kirkwood family Functional Spec: http://www.marvell.com/embedded-processors/kirkwood/assets/FS_88F6180_9x_6281_OpenSource.pdf Homepage: http://www.marvell.com/embedded-processors/kirkwood/ Core: Feroceon ARMv5 compatible - Linux kernel mach directory: arch/arm/mach-kirkwood - Linux kernel plat directory: arch/arm/plat-orion + Linux kernel mach directory: arch/arm/mach-mvebu + Linux kernel plat directory: none Discovery family ---------------- @@ -83,7 +83,9 @@ EBU Armada family 88F6710 88F6707 88F6W11 - Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf + Product Brief: http://www.marvell.com/embedded-processors/armada-300/assets/Marvell_ARMADA_370_SoC.pdf + Hardware Spec: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-datasheet.pdf + Functional Spec: http://www.marvell.com/embedded-processors/armada-300/assets/ARMADA370-FunctionalSpec-datasheet.pdf Armada 375 Flavors: 88F6720 @@ -100,8 +102,7 @@ EBU Armada family MV78460 NOTE: not to be confused with the non-SMP 78xx0 SoCs Product Brief: http://www.marvell.com/embedded-processors/armada-xp/assets/Marvell-ArmadaXP-SoC-product%20brief.pdf - - No public datasheet available. + Functional Spec: http://www.marvell.com/embedded-processors/armada-xp/assets/ARMADA-XP-Functional-SpecDatasheet.pdf Core: Sheeva ARMv7 compatible @@ -135,7 +136,9 @@ Dove family (application processor) Functional Spec : http://www.marvell.com/application-processors/armada-500/assets/Armada-510-Functional-Spec.pdf Homepage: http://www.marvell.com/application-processors/armada-500/ Core: ARMv7 compatible - Directory: arch/arm/mach-dove + + Directory: arch/arm/mach-mvebu (DT enabled platforms) + arch/arm/mach-dove (non-DT enabled platforms) PXA 2xx/3xx/93x/95x family -------------------------- @@ -253,10 +256,10 @@ Berlin family (Digital Entertainment) Long-term plans --------------- - * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ and - mach-kirkwood/ into the mach-mvebu/ to support all SoCs from the - Marvell EBU (Engineering Business Unit) in a single mach- - directory. The plat-orion/ would therefore disappear. + * Unify the mach-dove/, mach-mv78xx0/, mach-orion5x/ into the + mach-mvebu/ to support all SoCs from the Marvell EBU (Engineering + Business Unit) in a single mach- directory. The plat-orion/ + would therefore disappear. * Unify the mach-mmp/ and mach-pxa/ into the same mach-pxa directory. The plat-pxa/ would therefore disappear. diff --git a/Documentation/arm/Samsung/Overview.txt b/Documentation/arm/Samsung/Overview.txt index 658abb258cefab1e8d5a1e9f0003b904a69e8b7b..8f7309bad4600982b928618d43059f359c64c9a8 100644 --- a/Documentation/arm/Samsung/Overview.txt +++ b/Documentation/arm/Samsung/Overview.txt @@ -13,8 +13,6 @@ Introduction - S3C24XX: See Documentation/arm/Samsung-S3C24XX/Overview.txt for full list - S3C64XX: S3C6400 and S3C6410 - - S5P6440 - - S5PC100 - S5PC110 / S5PV210 @@ -34,8 +32,6 @@ Configuration A number of configurations are supplied, as there is no current way of unifying all the SoCs into one kernel. - s5p6440_defconfig - S5P6440 specific default configuration - s5pc100_defconfig - S5PC100 specific default configuration s5pc110_defconfig - S5PC110 specific default configuration s5pv210_defconfig - S5PV210 specific default configuration @@ -67,13 +63,6 @@ Layout changes where to simplify the include and dependency issues involved with having so many different platform directories. - It was decided to remove plat-s5pc1xx as some of the support was already - in plat-s5p or plat-samsung, with the S5PC110 support added with S5PV210 - the only user was the S5PC100. The S5PC100 specific items where moved to - arch/arm/mach-s5pc100. - - - Port Contributors ----------------- diff --git a/Documentation/arm/Samsung/clksrc-change-registers.awk b/Documentation/arm/Samsung/clksrc-change-registers.awk index 0c50220851fbd3ea718eb0964825083ba8a42ffa..d9174fabe37e618f30559d00f69b2e322be0d59a 100755 --- a/Documentation/arm/Samsung/clksrc-change-registers.awk +++ b/Documentation/arm/Samsung/clksrc-change-registers.awk @@ -68,7 +68,6 @@ BEGIN { while (getline line < ARGV[1] > 0) { if (line ~ /\#define.*_MASK/ && - !(line ~ /S5PC100_EPLL_MASK/) && !(line ~ /USB_SIG_MASK/)) { splitdefine(line, fields) name = fields[0] diff --git a/Documentation/arm64/booting.txt b/Documentation/arm64/booting.txt index 85af34d55cee69f34c7a360bde50693b741eae14..f3c05b5f9f08df8bf3cfe669615c29767ff2f4b5 100644 --- a/Documentation/arm64/booting.txt +++ b/Documentation/arm64/booting.txt @@ -168,6 +168,14 @@ Before jumping into the kernel, the following conditions must be met: the kernel image will be entered must be initialised by software at a higher exception level to prevent execution in an UNKNOWN state. + For systems with a GICv3 interrupt controller: + - If EL3 is present: + ICC_SRE_EL3.Enable (bit 3) must be initialiased to 0b1. + ICC_SRE_EL3.SRE (bit 0) must be initialised to 0b1. + - If the kernel is entered at EL1: + ICC.SRE_EL2.Enable (bit 3) must be initialised to 0b1 + ICC_SRE_EL2.SRE (bit 0) must be initialised to 0b1. + The requirements described above for CPU mode, caches, MMUs, architected timers, coherency and system registers apply to all CPUs. All CPUs must enter the kernel in the same exception level. diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt index 80ac454704b80903ba20dc4c00785d1f1eed9bf0..8870b02121502430a420e129b61e7d887ee0c762 100644 --- a/Documentation/cgroups/memcg_test.txt +++ b/Documentation/cgroups/memcg_test.txt @@ -24,64 +24,27 @@ Please note that implementation details can be changed. a page/swp_entry may be charged (usage += PAGE_SIZE) at - mem_cgroup_charge_anon() - Called at new page fault and Copy-On-Write. - - mem_cgroup_try_charge_swapin() - Called at do_swap_page() (page fault on swap entry) and swapoff. - Followed by charge-commit-cancel protocol. (With swap accounting) - At commit, a charge recorded in swap_cgroup is removed. - - mem_cgroup_charge_file() - Called at add_to_page_cache() - - mem_cgroup_cache_charge_swapin() - Called at shmem's swapin. - - mem_cgroup_prepare_migration() - Called before migration. "extra" charge is done and followed by - charge-commit-cancel protocol. - At commit, charge against oldpage or newpage will be committed. + mem_cgroup_try_charge() 2. Uncharge a page/swp_entry may be uncharged (usage -= PAGE_SIZE) by - mem_cgroup_uncharge_page() - Called when an anonymous page is fully unmapped. I.e., mapcount goes - to 0. If the page is SwapCache, uncharge is delayed until - mem_cgroup_uncharge_swapcache(). - - mem_cgroup_uncharge_cache_page() - Called when a page-cache is deleted from radix-tree. If the page is - SwapCache, uncharge is delayed until mem_cgroup_uncharge_swapcache(). - - mem_cgroup_uncharge_swapcache() - Called when SwapCache is removed from radix-tree. The charge itself - is moved to swap_cgroup. (If mem+swap controller is disabled, no - charge to swap occurs.) + mem_cgroup_uncharge() + Called when a page's refcount goes down to 0. mem_cgroup_uncharge_swap() Called when swp_entry's refcnt goes down to 0. A charge against swap disappears. - mem_cgroup_end_migration(old, new) - At success of migration old is uncharged (if necessary), a charge - to new page is committed. At failure, charge to old page is committed. - 3. charge-commit-cancel - In some case, we can't know this "charge" is valid or not at charging - (because of races). - To handle such case, there are charge-commit-cancel functions. - mem_cgroup_try_charge_XXX - mem_cgroup_commit_charge_XXX - mem_cgroup_cancel_charge_XXX - these are used in swap-in and migration. + Memcg pages are charged in two steps: + mem_cgroup_try_charge() + mem_cgroup_commit_charge() or mem_cgroup_cancel_charge() At try_charge(), there are no flags to say "this page is charged". at this point, usage += PAGE_SIZE. - At commit(), the function checks the page should be charged or not - and set flags or avoid charging.(usage -= PAGE_SIZE) + At commit(), the page is associated with the memcg. At cancel(), simply usage -= PAGE_SIZE. @@ -91,18 +54,6 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y. Anonymous page is newly allocated at - page fault into MAP_ANONYMOUS mapping. - Copy-On-Write. - It is charged right after it's allocated before doing any page table - related operations. Of course, it's uncharged when another page is used - for the fault address. - - At freeing anonymous page (by exit() or munmap()), zap_pte() is called - and pages for ptes are freed one by one.(see mm/memory.c). Uncharges - are done at page_remove_rmap() when page_mapcount() goes down to 0. - - Another page freeing is by page-reclaim (vmscan.c) and anonymous - pages are swapped out. In this case, the page is marked as - PageSwapCache(). uncharge() routine doesn't uncharge the page marked - as SwapCache(). It's delayed until __delete_from_swap_cache(). 4.1 Swap-in. At swap-in, the page is taken from swap-cache. There are 2 cases. @@ -111,41 +62,6 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y. (b) If the SwapCache has been mapped by processes, it has been charged already. - This swap-in is one of the most complicated work. In do_swap_page(), - following events occur when pte is unchanged. - - (1) the page (SwapCache) is looked up. - (2) lock_page() - (3) try_charge_swapin() - (4) reuse_swap_page() (may call delete_swap_cache()) - (5) commit_charge_swapin() - (6) swap_free(). - - Considering following situation for example. - - (A) The page has not been charged before (2) and reuse_swap_page() - doesn't call delete_from_swap_cache(). - (B) The page has not been charged before (2) and reuse_swap_page() - calls delete_from_swap_cache(). - (C) The page has been charged before (2) and reuse_swap_page() doesn't - call delete_from_swap_cache(). - (D) The page has been charged before (2) and reuse_swap_page() calls - delete_from_swap_cache(). - - memory.usage/memsw.usage changes to this page/swp_entry will be - Case (A) (B) (C) (D) - Event - Before (2) 0/ 1 0/ 1 1/ 1 1/ 1 - =========================================== - (3) +1/+1 +1/+1 +1/+1 +1/+1 - (4) - 0/ 0 - -1/ 0 - (5) 0/-1 0/ 0 -1/-1 0/ 0 - (6) - 0/-1 - 0/-1 - =========================================== - Result 1/ 1 1/ 1 1/ 1 1/ 1 - - In any cases, charges to this page should be 1/ 1. - 4.2 Swap-out. At swap-out, typical state transition is below. @@ -158,28 +74,20 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y. swp_entry's refcnt -= 1. - At (b), the page is marked as SwapCache and not uncharged. - At (d), the page is removed from SwapCache and a charge in page_cgroup - is moved to swap_cgroup. - Finally, at task exit, (e) zap_pte() is called and swp_entry's refcnt -=1 -> 0. - Here, a charge in swap_cgroup disappears. 5. Page Cache Page Cache is charged at - add_to_page_cache_locked(). - uncharged at - - __remove_from_page_cache(). - The logic is very clear. (About migration, see below) Note: __remove_from_page_cache() is called by remove_from_page_cache() and __remove_mapping(). 6. Shmem(tmpfs) Page Cache - Memcg's charge/uncharge have special handlers of shmem. The best way - to understand shmem's page state transition is to read mm/shmem.c. + The best way to understand shmem's page state transition is to read + mm/shmem.c. But brief explanation of the behavior of memcg around shmem will be helpful to understand the logic. @@ -192,56 +100,10 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y. It's charged when... - A new page is added to shmem's radix-tree. - A swp page is read. (move a charge from swap_cgroup to page_cgroup) - It's uncharged when - - A page is removed from radix-tree and not SwapCache. - - When SwapCache is removed, a charge is moved to swap_cgroup. - - When swp_entry's refcnt goes down to 0, a charge in swap_cgroup - disappears. 7. Page Migration - One of the most complicated functions is page-migration-handler. - Memcg has 2 routines. Assume that we are migrating a page's contents - from OLDPAGE to NEWPAGE. - - Usual migration logic is.. - (a) remove the page from LRU. - (b) allocate NEWPAGE (migration target) - (c) lock by lock_page(). - (d) unmap all mappings. - (e-1) If necessary, replace entry in radix-tree. - (e-2) move contents of a page. - (f) map all mappings again. - (g) pushback the page to LRU. - (-) OLDPAGE will be freed. - - Before (g), memcg should complete all necessary charge/uncharge to - NEWPAGE/OLDPAGE. - - The point is.... - - If OLDPAGE is anonymous, all charges will be dropped at (d) because - try_to_unmap() drops all mapcount and the page will not be - SwapCache. - - - If OLDPAGE is SwapCache, charges will be kept at (g) because - __delete_from_swap_cache() isn't called at (e-1) - - - If OLDPAGE is page-cache, charges will be kept at (g) because - remove_from_swap_cache() isn't called at (e-1) - - memcg provides following hooks. - - - mem_cgroup_prepare_migration(OLDPAGE) - Called after (b) to account a charge (usage += PAGE_SIZE) against - memcg which OLDPAGE belongs to. - - - mem_cgroup_end_migration(OLDPAGE, NEWPAGE) - Called after (f) before (g). - If OLDPAGE is used, commit OLDPAGE again. If OLDPAGE is already - charged, a charge by prepare_migration() is automatically canceled. - If NEWPAGE is used, commit NEWPAGE and uncharge OLDPAGE. - - But zap_pte() (by exit or munmap) can be called while migration, - we have to check if OLDPAGE/NEWPAGE is a valid page after commit(). + + mem_cgroup_migrate() 8. LRU Each memcg has its own private LRU. Now, its handling is under global diff --git a/Documentation/device-mapper/switch.txt b/Documentation/device-mapper/switch.txt index 2fa749387be807ade453ba645fbcf8250afffb14..8897d04948384289b3fca54801be9676c15ce0e5 100644 --- a/Documentation/device-mapper/switch.txt +++ b/Documentation/device-mapper/switch.txt @@ -106,6 +106,11 @@ which paths. The path number in the range 0 ... ( - 1). Expressed in hexadecimal (WITHOUT any prefix like 0x). +R, + This parameter allows repetitive patterns to be loaded quickly. and + are hexadecimal numbers. The last mappings are repeated in the next + slots. + Status ====== @@ -124,3 +129,10 @@ Create a switch device with 64kB region size: Set mappings for the first 7 entries to point to devices switch0, switch1, switch2, switch0, switch1, switch2, switch1: dmsetup message switch 0 set_region_mappings 0:0 :1 :2 :0 :1 :2 :1 + +Set repetitive mapping. This command: + dmsetup message switch 0 set_region_mappings 1000:1 :2 R2,10 +is equivalent to: + dmsetup message switch 0 set_region_mappings 1000:1 :2 :1 :2 :1 :2 :1 :2 \ + :1 :2 :1 :2 :1 :2 :1 :2 :1 :2 + diff --git a/Documentation/devicetree/bindings/arm/adapteva.txt b/Documentation/devicetree/bindings/arm/adapteva.txt new file mode 100644 index 0000000000000000000000000000000000000000..1d8af9e36065e490223e420e43e63e171847162a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/adapteva.txt @@ -0,0 +1,7 @@ +Adapteva Platforms Device Tree Bindings +--------------------------------------- + +Parallella board + +Required root node properties: + - compatible = "adapteva,parallella"; diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 3509707f932085a8380576ee4c6b63a453dab1a7..c554ed3d44fb7c77f8ae19c441a57f5d05853ef8 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -86,3 +86,9 @@ Interrupt controllers: compatible = "arm,versatile-sic"; interrupt-controller; #interrupt-cells = <1>; + +Required nodes: + +- core-module: the root node to the Versatile platforms must have + a core-module with regs and the compatible strings + "arm,core-module-versatile", "syscon" diff --git a/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..8781073029e9f376a16e7911eaa86bf3efebd7ea --- /dev/null +++ b/Documentation/devicetree/bindings/arm/armada-380-mpcore-soc-ctrl.txt @@ -0,0 +1,14 @@ +Marvell Armada 38x CA9 MPcore SoC Controller +============================================ + +Required properties: + +- compatible: Should be "marvell,armada-380-mpcore-soc-ctrl". + +- reg: should be the register base and length as documented in the + datasheet for the CA9 MPcore SoC Control registers + +mpcore-soc-ctrl@20d20 { + compatible = "marvell,armada-380-mpcore-soc-ctrl"; + reg = <0x20d20 0x6c>; +}; diff --git a/Documentation/devicetree/bindings/arm/atmel-pmc.txt b/Documentation/devicetree/bindings/arm/atmel-pmc.txt index 389bed5056e8ec8e6bdcf5806b60b9db3a2c4150..795cc78543fef174df669bf1830ecf03bdb6bb9a 100644 --- a/Documentation/devicetree/bindings/arm/atmel-pmc.txt +++ b/Documentation/devicetree/bindings/arm/atmel-pmc.txt @@ -1,7 +1,10 @@ * Power Management Controller (PMC) Required properties: -- compatible: Should be "atmel,at91rm9200-pmc" +- compatible: Should be "atmel,-pmc". + can be: at91rm9200, at91sam9260, at91sam9g45, at91sam9n12, + at91sam9x5, sama5d3 + - reg: Should contain PMC registers location and length Examples: diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method new file mode 100644 index 0000000000000000000000000000000000000000..8240c023e20243a38eab372031b60a75945848f5 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351-cpu-method @@ -0,0 +1,36 @@ +Broadcom Kona Family CPU Enable Method +-------------------------------------- +This binding defines the enable method used for starting secondary +CPUs in the following Broadcom SoCs: + BCM11130, BCM11140, BCM11351, BCM28145, BCM28155, BCM21664 + +The enable method is specified by defining the following required +properties in the "cpus" device tree node: + - enable-method = "brcm,bcm11351-cpu-method"; + - secondary-boot-reg = <...>; + +The secondary-boot-reg property is a u32 value that specifies the +physical address of the register used to request the ROM holding pen +code release a secondary CPU. The value written to the register is +formed by encoding the target CPU id into the low bits of the +physical start address it should jump to. + +Example: + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm11351-cpu-method"; + secondary-boot-reg = <0x3500417c>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt new file mode 100644 index 0000000000000000000000000000000000000000..3c436cc4f35d7069c27c97962bd444dfa25d8b3e --- /dev/null +++ b/Documentation/devicetree/bindings/arm/brcm-brcmstb.txt @@ -0,0 +1,95 @@ +ARM Broadcom STB platforms Device Tree Bindings +----------------------------------------------- +Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants) +SoC shall have the following DT organization: + +Required root node properties: + - compatible: "brcm,bcm", "brcm,brcmstb" + +example: +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Broadcom STB (bcm7445)"; + compatible = "brcm,bcm7445", "brcm,brcmstb"; + +Further, syscon nodes that map platform-specific registers used for general +system control is required: + + - compatible: "brcm,bcm-sun-top-ctrl", "syscon" + - compatible: "brcm,bcm-hif-cpubiuctrl", "syscon" + - compatible: "brcm,bcm-hif-continuation", "syscon" + +example: + rdb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x00 0xf0000000 0x1000000>; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7445-sun-top-ctrl", "syscon"; + reg = <0x404000 0x51c>; + }; + + hif_cpubiuctrl: syscon@3e2400 { + compatible = "brcm,bcm7445-hif-cpubiuctrl", "syscon"; + reg = <0x3e2400 0x5b4>; + }; + + hif_continuation: syscon@452000 { + compatible = "brcm,bcm7445-hif-continuation", "syscon"; + reg = <0x452000 0x100>; + }; + }; + +Lastly, nodes that allow for support of SMP initialization and reboot are +required: + +smpboot +------- +Required properties: + + - compatible + The string "brcm,brcmstb-smpboot". + + - syscon-cpu + A phandle / integer array property which lets the BSP know the location + of certain CPU power-on registers. + + The layout of the property is as follows: + o a phandle to the "hif_cpubiuctrl" syscon node + o offset to the base CPU power zone register + o offset to the base CPU reset register + + - syscon-cont + A phandle pointing to the syscon node which describes the CPU boot + continuation registers. + o a phandle to the "hif_continuation" syscon node + +example: + smpboot { + compatible = "brcm,brcmstb-smpboot"; + syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; + syscon-cont = <&hif_continuation>; + }; + +reboot +------- +Required properties + + - compatible + The string property "brcm,brcmstb-reboot". + + - syscon + A phandle / integer array that points to the syscon node which describes + the general system reset registers. + o a phandle to "sun_top_ctrl" + o offset to the "reset source enable" register + o offset to the "software master reset" register + +example: + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; diff --git a/Documentation/devicetree/bindings/arm/ccn.txt b/Documentation/devicetree/bindings/arm/ccn.txt new file mode 100644 index 0000000000000000000000000000000000000000..b100d3847d8812c5ff5c27d0d379096d128df528 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/ccn.txt @@ -0,0 +1,21 @@ +* ARM CCN (Cache Coherent Network) + +Required properties: + +- compatible: (standard compatible string) should be one of: + "arm,ccn-504" + "arm,ccn-508" + +- reg: (standard registers property) physical address and size + (16MB) of the configuration registers block + +- interrupts: (standard interrupt property) single interrupt + generated by the control block + +Example: + + ccn@0x2000000000 { + compatible = "arm,ccn-504"; + reg = <0x20 0x00000000 0 0x1000000>; + interrupts = <0 181 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp b/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp new file mode 100644 index 0000000000000000000000000000000000000000..cd236b727e2a12b0339c56998136302fce2daddb --- /dev/null +++ b/Documentation/devicetree/bindings/arm/cpu-enable-method/marvell,berlin-smp @@ -0,0 +1,41 @@ +======================================================== +Secondary CPU enable-method "marvell,berlin-smp" binding +======================================================== + +This document describes the "marvell,berlin-smp" method for enabling secondary +CPUs. To apply to all CPUs, a single "marvell,berlin-smp" enable method should +be defined in the "cpus" node. + +Enable method name: "marvell,berlin-smp" +Compatible machines: "marvell,berlin2" and "marvell,berlin2q" +Compatible CPUs: "marvell,pj4b" and "arm,cortex-a9" +Related properties: (none) + +Note: +This enable method needs valid nodes compatible with "arm,cortex-a9-scu" and +"marvell,berlin-cpu-ctrl"[1]. + +Example: + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "marvell,berlin-smp"; + + cpu@0 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <0>; + }; + + cpu@1 { + compatible = "marvell,pj4b"; + device_type = "cpu"; + next-level-cache = <&l2>; + reg = <1>; + }; + }; + +-- +[1] arm/marvell,berlin.txt diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt index 1fe72a0778cd9725ab34ada1b0b27b068f9024e1..298e2f6b33c63a3ce1241b71dce1c2d65164c1b3 100644 --- a/Documentation/devicetree/bindings/arm/cpus.txt +++ b/Documentation/devicetree/bindings/arm/cpus.txt @@ -152,7 +152,9 @@ nodes to be present and contain the properties described below. "arm,cortex-a7" "arm,cortex-a8" "arm,cortex-a9" + "arm,cortex-a12" "arm,cortex-a15" + "arm,cortex-a17" "arm,cortex-a53" "arm,cortex-a57" "arm,cortex-m0" @@ -163,6 +165,7 @@ nodes to be present and contain the properties described below. "arm,cortex-r4" "arm,cortex-r5" "arm,cortex-r7" + "brcm,brahma-b15" "faraday,fa526" "intel,sa110" "intel,sa1100" @@ -184,6 +187,7 @@ nodes to be present and contain the properties described below. can be one of: "allwinner,sun6i-a31" "arm,psci" + "brcm,brahma-b15" "marvell,armada-375-smp" "marvell,armada-380-smp" "marvell,armada-xp-smp" diff --git a/Documentation/devicetree/bindings/arm/gic-v3.txt b/Documentation/devicetree/bindings/arm/gic-v3.txt new file mode 100644 index 0000000000000000000000000000000000000000..33cd05e6c12578e1d1e0de12a230b413dfc1de78 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/gic-v3.txt @@ -0,0 +1,79 @@ +* ARM Generic Interrupt Controller, version 3 + +AArch64 SMP cores are often associated with a GICv3, providing Private +Peripheral Interrupts (PPI), Shared Peripheral Interrupts (SPI), +Software Generated Interrupts (SGI), and Locality-specific Peripheral +Interrupts (LPI). + +Main node required properties: + +- compatible : should at least contain "arm,gic-v3". +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. Must be a single cell with a value of at least 3. + + The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI + interrupts. Other values are reserved for future use. + + The 2nd cell contains the interrupt number for the interrupt type. + SPI interrupts are in the range [0-987]. PPI interrupts are in the + range [0-15]. + + The 3rd cell is the flags, encoded as follows: + bits[3:0] trigger type and level flags. + 1 = edge triggered + 4 = level triggered + + Cells 4 and beyond are reserved for future use. When the 1st cell + has a value of 0 or 1, cells 4 and beyond act as padding, and may be + ignored. It is recommended that padding cells have a value of 0. + +- reg : Specifies base physical address(s) and size of the GIC + registers, in the following order: + - GIC Distributor interface (GICD) + - GIC Redistributors (GICR), one range per redistributor region + - GIC CPU interface (GICC) + - GIC Hypervisor interface (GICH) + - GIC Virtual CPU interface (GICV) + + GICC, GICH and GICV are optional. + +- interrupts : Interrupt source of the VGIC maintenance interrupt. + +Optional + +- redistributor-stride : If using padding pages, specifies the stride + of consecutive redistributors. Must be a multiple of 64kB. + +- #redistributor-regions: The number of independent contiguous regions + occupied by the redistributors. Required if more than one such + region is present. + +Examples: + + gic: interrupt-controller@2cf00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x2f000000 0 0x10000>, // GICD + <0x0 0x2f100000 0 0x200000>, // GICR + <0x0 0x2c000000 0 0x2000>, // GICC + <0x0 0x2c010000 0 0x2000>, // GICH + <0x0 0x2c020000 0 0x2000>; // GICV + interrupts = <1 9 4>; + }; + + gic: interrupt-controller@2c010000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + interrupt-controller; + redistributor-stride = <0x0 0x40000>; // 256kB stride + #redistributor-regions = <2>; + reg = <0x0 0x2c010000 0 0x10000>, // GICD + <0x0 0x2d000000 0 0x800000>, // GICR 1: CPUs 0-31 + <0x0 0x2e000000 0 0x800000>; // GICR 2: CPUs 32-63 + <0x0 0x2c040000 0 0x2000>, // GICC + <0x0 0x2c060000 0 0x2000>, // GICH + <0x0 0x2c080000 0 0x2000>; // GICV + interrupts = <1 9 4>; + }; diff --git a/Documentation/devicetree/bindings/arm/gic.txt b/Documentation/devicetree/bindings/arm/gic.txt index 5573c08d3180b301a80990930c0da6259deff94f..c7d2fa15667826ac5d30455e89dc213085735759 100644 --- a/Documentation/devicetree/bindings/arm/gic.txt +++ b/Documentation/devicetree/bindings/arm/gic.txt @@ -16,6 +16,7 @@ Main node required properties: "arm,cortex-a9-gic" "arm,cortex-a7-gic" "arm,arm11mp-gic" + "brcm,brahma-b15-gic" - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an interrupt source. The type shall be a and the value shall be 3. diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt index df0a452b8526de02bc935f235123acb7ae87b54c..934f00025cc4cad127340b485f3eaeb411964802 100644 --- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt +++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt @@ -31,6 +31,17 @@ Example: reboot-offset = <0x4>; }; +----------------------------------------------------------------------- +Hisilicon CPU controller + +Required properties: +- compatible : "hisilicon,cpuctrl" +- reg : Register address and size + +The clock registers and power registers of secondary cores are defined +in CPU controller, especially in HIX5HD2 SoC. + +----------------------------------------------------------------------- PCTRL: Peripheral misc control register Required Properties: diff --git a/Documentation/devicetree/bindings/arm/marvell,berlin.txt b/Documentation/devicetree/bindings/arm/marvell,berlin.txt index 94013a9a8769a714a544403029cd23a21e2bf402..904de5781f44d9dd10efae916101e1fac7835274 100644 --- a/Documentation/devicetree/bindings/arm/marvell,berlin.txt +++ b/Documentation/devicetree/bindings/arm/marvell,berlin.txt @@ -24,6 +24,22 @@ SoC and board used. Currently known SoC compatibles are: ... } +* Marvell Berlin CPU control bindings + +CPU control register allows various operations on CPUs, like resetting them +independently. + +Required properties: +- compatible: should be "marvell,berlin-cpu-ctrl" +- reg: address and length of the register set + +Example: + +cpu-ctrl@f7dd0000 { + compatible = "marvell,berlin-cpu-ctrl"; + reg = <0xf7dd0000 0x10000>; +}; + * Marvell Berlin2 chip control binding Marvell Berlin SoCs have a chip control register set providing several diff --git a/Documentation/devicetree/bindings/arm/mediatek.txt b/Documentation/devicetree/bindings/arm/mediatek.txt new file mode 100644 index 0000000000000000000000000000000000000000..d6ac71f37314423a90f755028fa3463cc090b6d3 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/mediatek.txt @@ -0,0 +1,8 @@ +Mediatek MT6589 Platforms Device Tree Bindings + +Boards with a SoC of the Mediatek MT6589 shall have the following property: + +Required root node property: + +compatible: must contain "mediatek,mt6589" + diff --git a/Documentation/devicetree/bindings/arm/omap/crossbar.txt b/Documentation/devicetree/bindings/arm/omap/crossbar.txt index fb88585cfb93a5f727c3cce40604ba10757a00ab..4139db353d0a9846bd88d0f442988a2d8a2f53b7 100644 --- a/Documentation/devicetree/bindings/arm/omap/crossbar.txt +++ b/Documentation/devicetree/bindings/arm/omap/crossbar.txt @@ -10,6 +10,7 @@ Required properties: - compatible : Should be "ti,irq-crossbar" - reg: Base address and the size of the crossbar registers. - ti,max-irqs: Total number of irqs available at the interrupt controller. +- ti,max-crossbar-sources: Maximum number of crossbar sources that can be routed. - ti,reg-size: Size of a individual register in bytes. Every individual register is assumed to be of same size. Valid sizes are 1, 2, 4. - ti,irqs-reserved: List of the reserved irq lines that are not muxed using @@ -17,11 +18,46 @@ Required properties: so crossbar bar driver should not consider them as free lines. +Optional properties: +- ti,irqs-skip: This is similar to "ti,irqs-reserved", but these are for + SOC-specific hard-wiring of those irqs which unexpectedly bypasses the + crossbar. These irqs have a crossbar register, but still cannot be used. + +- ti,irqs-safe-map: integer which maps to a safe configuration to use + when the interrupt controller irq is unused (when not provided, default is 0) + Examples: crossbar_mpu: @4a020000 { compatible = "ti,irq-crossbar"; reg = <0x4a002a48 0x130>; ti,max-irqs = <160>; + ti,max-crossbar-sources = <400>; ti,reg-size = <2>; ti,irqs-reserved = <0 1 2 3 5 6 131 132 139 140>; + ti,irqs-skip = <10 133 139 140>; }; + +Consumer: +======== +See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt and +Documentation/devicetree/bindings/arm/gic.txt for further details. + +An interrupt consumer on an SoC using crossbar will use: + interrupts = +When the request number is between 0 to that described by +"ti,max-crossbar-sources", it is assumed to be a crossbar mapping. If the +request_number is greater than "ti,max-crossbar-sources", then it is mapped as a +quirky hardware mapping direct to GIC. + +Example: + device_x@0x4a023000 { + /* Crossbar 8 used */ + interrupts = ; + ... + }; + + device_y@0x4a033000 { + /* Direct mapped GIC SPI 1 used */ + interrupts = ; + ... + }; diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt index d22b216f5d230f57812f98034580c603b4a6e30d..0edc90305dfe07b262d7f493de3b964f7635c06d 100644 --- a/Documentation/devicetree/bindings/arm/omap/omap.txt +++ b/Documentation/devicetree/bindings/arm/omap/omap.txt @@ -129,6 +129,9 @@ Boards: - AM437x GP EVM compatible = "ti,am437x-gp-evm", "ti,am4372", "ti,am43" +- AM437x SK EVM: AM437x StarterKit Evaluation Module + compatible = "ti,am437x-sk-evm", "ti,am4372", "ti,am43" + - DRA742 EVM: Software Development Board for DRA742 compatible = "ti,dra7-evm", "ti,dra742", "ti,dra74", "ti,dra7" diff --git a/Documentation/devicetree/bindings/arm/omap/prcm.txt b/Documentation/devicetree/bindings/arm/omap/prcm.txt new file mode 100644 index 0000000000000000000000000000000000000000..79074dac684abfd6eec2239ef2a128955cd1641f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/omap/prcm.txt @@ -0,0 +1,65 @@ +OMAP PRCM bindings + +Power Reset and Clock Manager lists the device clocks and clockdomains under +a DT hierarchy. Each TI SoC can have multiple PRCM entities listed for it, +each describing one module and the clock hierarchy under it. see [1] for +documentation about the individual clock/clockdomain nodes. + +[1] Documentation/devicetree/bindings/clock/ti/* + +Required properties: +- compatible: Must be one of: + "ti,am3-prcm" + "ti,am3-scrm" + "ti,am4-prcm" + "ti,am4-scrm" + "ti,omap2-prcm" + "ti,omap2-scrm" + "ti,omap3-prm" + "ti,omap3-cm" + "ti,omap3-scrm" + "ti,omap4-cm1" + "ti,omap4-prm" + "ti,omap4-cm2" + "ti,omap4-scrm" + "ti,omap5-prm" + "ti,omap5-cm-core-aon" + "ti,omap5-scrm" + "ti,omap5-cm-core" + "ti,dra7-prm" + "ti,dra7-cm-core-aon" + "ti,dra7-cm-core" +- reg: Contains PRCM module register address range + (base address and length) +- clocks: clocks for this module +- clockdomains: clockdomains for this module + +Example: + +cm: cm@48004000 { + compatible = "ti,omap3-cm"; + reg = <0x48004000 0x4000>; + + cm_clocks: clocks { + #address-cells = <1>; + #size-cells = <0>; + }; + + cm_clockdomains: clockdomains { + }; +} + +&cm_clocks { + omap2_32k_fck: omap_32k_fck { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + }; +}; + +&cm_clockdomains { + core_l3_clkdm: core_l3_clkdm { + compatible = "ti,clockdomain"; + clocks = <&sdrc_ick>; + }; +}; diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt index 832fe8cc24d706e586242deebfd670791c7ad8b4..adc61b095bd1b07d5094fee65654f1caa365fa21 100644 --- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt +++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt @@ -14,14 +14,21 @@ Required properties: for exynos4412/5250 controllers. Must be "samsung,exynos-adc-v2" for future controllers. + Must be "samsung,exynos3250-adc" for + controllers compatible with ADC of Exynos3250. - reg: Contains ADC register address range (base address and length) and the address of the phy enable register. - interrupts: Contains the interrupt information for the timer. The format is being dependent on which interrupt controller the Samsung device uses. - #io-channel-cells = <1>; As ADC has multiple outputs -- clocks From common clock binding: handle to adc clock. -- clock-names From common clock binding: Shall be "adc". +- clocks From common clock bindings: handles to clocks specified + in "clock-names" property, in the same order. +- clock-names From common clock bindings: list of clock input names + used by ADC block: + - "adc" : ADC bus clock + - "sclk" : ADC special clock (only for Exynos3250 and + compatible ADC block) - vdd-supply VDD input supply. Note: child nodes can be added for auto probing from device tree. @@ -41,6 +48,20 @@ adc: adc@12D10000 { vdd-supply = <&buck5_reg>; }; +Example: adding device info in dtsi file for Exynos3250 with additional sclk + +adc: adc@126C0000 { + compatible = "samsung,exynos3250-adc", "samsung,exynos-adc-v2; + reg = <0x126C0000 0x100>, <0x10020718 0x4>; + interrupts = <0 137 0>; + #io-channel-cells = <1>; + io-channel-ranges; + + clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; + clock-names = "adc", "sclk"; + + vdd-supply = <&buck5_reg>; +}; Example: Adding child nodes in dts file diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt index f9865e77e0b026fb4f8636f3a8c5286add9995d0..1e1979b229ffc793fb5633166363cd6e2a54a8ee 100644 --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt @@ -7,6 +7,8 @@ Properties: - "samsung,exynos4212-pmu" - for Exynos4212 SoC, - "samsung,exynos4412-pmu" - for Exynos4412 SoC, - "samsung,exynos5250-pmu" - for Exynos5250 SoC, + - "samsung,exynos5260-pmu" - for Exynos5260 SoC. + - "samsung,exynos5410-pmu" - for Exynos5410 SoC, - "samsung,exynos5420-pmu" - for Exynos5420 SoC. second value must be always "syscon". diff --git a/Documentation/devicetree/bindings/arm/spear-misc.txt b/Documentation/devicetree/bindings/arm/spear-misc.txt new file mode 100644 index 0000000000000000000000000000000000000000..cf649827ffcd77b31b50a35aeee938861142074a --- /dev/null +++ b/Documentation/devicetree/bindings/arm/spear-misc.txt @@ -0,0 +1,9 @@ +SPEAr Misc configuration +=========================== +SPEAr SOCs have some miscellaneous registers which are used to configure +few properties of different peripheral controllers. + +misc node required properties: + +- compatible Should be "st,spear1340-misc", "syscon". +- reg: Address range of misc space upto 8K diff --git a/Documentation/devicetree/bindings/arm/tegra.txt b/Documentation/devicetree/bindings/arm/tegra.txt index 558ed4b4ef391faffe47afe815012f43ff13080b..73278c6d2dc3fe40d23dcfc7060ef4005eca9bfa 100644 --- a/Documentation/devicetree/bindings/arm/tegra.txt +++ b/Documentation/devicetree/bindings/arm/tegra.txt @@ -30,6 +30,8 @@ board-specific compatible values: nvidia,seaboard nvidia,ventana nvidia,whistler + toradex,apalis_t30 + toradex,apalis_t30-eval toradex,colibri_t20-512 toradex,iris diff --git a/Documentation/devicetree/bindings/arm/xilinx.txt b/Documentation/devicetree/bindings/arm/xilinx.txt index 6f1ed830b4f780838263d5f459f085d0734c8799..1f799535788859516c04adb9dea821f55a0aaa83 100644 --- a/Documentation/devicetree/bindings/arm/xilinx.txt +++ b/Documentation/devicetree/bindings/arm/xilinx.txt @@ -1,7 +1,7 @@ -Xilinx Zynq EP107 Emulation Platform board +Xilinx Zynq Platforms Device Tree Bindings -This board is an emulation platform for the Zynq product which is -based on an ARM Cortex A9 processor. +Boards with Zynq-7000 SOC based on an ARM Cortex A9 processor +shall have the following properties. Required root node properties: - - compatible = "xlnx,zynq-ep107"; + - compatible = "xlnx,zynq-7000"; diff --git a/Documentation/devicetree/bindings/clock/arm-integrator.txt b/Documentation/devicetree/bindings/clock/arm-integrator.txt index 652914b17b9557cb8a6e9721e15b6ace744b5791..ecc69520bceaa11542e8b7905dc3a52e1dc754a5 100644 --- a/Documentation/devicetree/bindings/clock/arm-integrator.txt +++ b/Documentation/devicetree/bindings/clock/arm-integrator.txt @@ -1,4 +1,4 @@ -Clock bindings for ARM Integrator Core Module clocks +Clock bindings for ARM Integrator and Versatile Core Module clocks Auxilary Oscillator Clock @@ -12,7 +12,7 @@ parent node. Required properties: -- compatible: must be "arm,integrator-cm-auxosc" +- compatible: must be "arm,integrator-cm-auxosc" or "arm,versatile-cm-auxosc" - #clock-cells: must be <0> Optional properties: diff --git a/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt new file mode 100644 index 0000000000000000000000000000000000000000..4fc869b69d4ac065da2b23c3f0ec2c90fec69c3a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/clk-s5pv210-audss.txt @@ -0,0 +1,53 @@ +* Samsung Audio Subsystem Clock Controller + +The Samsung Audio Subsystem clock controller generates and supplies clocks +to Audio Subsystem block available in the S5PV210 and compatible SoCs. + +Required Properties: + +- compatible: should be "samsung,s5pv210-audss-clock". +- reg: physical base address and length of the controller's register set. + +- #clock-cells: should be 1. + +- clocks: + - hclk: AHB bus clock of the Audio Subsystem. + - xxti: Optional fixed rate PLL reference clock, parent of mout_audss. If + not specified (i.e. xusbxti is used for PLL reference), it is fixed to + a clock named "xxti". + - fout_epll: Input PLL to the AudioSS block, parent of mout_audss. + - iiscdclk0: Optional external i2s clock, parent of mout_i2s. If not + specified, it is fixed to a clock named "iiscdclk0". + - sclk_audio0: Audio bus clock, parent of mout_i2s. + +- clock-names: Aliases for the above clocks. They should be "hclk", + "xxti", "fout_epll", "iiscdclk0", and "sclk_audio0" respectively. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/s5pv210-audss-clk.h header and can be used in device +tree sources. + +Example: Clock controller node. + + clk_audss: clock-controller@c0900000 { + compatible = "samsung,s5pv210-audss-clock"; + reg = <0xc0900000 0x1000>; + #clock-cells = <1>; + clock-names = "hclk", "xxti", + "fout_epll", "sclk_audio0"; + clocks = <&clocks DOUT_HCLKP>, <&xxti>, + <&clocks FOUT_EPLL>, <&clocks SCLK_AUDIO0>; + }; + +Example: I2S controller node that consumes the clock generated by the clock + controller. Refer to the standard clock bindings for information + about 'clocks' and 'clock-names' property. + + i2s0: i2s@03830000 { + /* ... */ + clock-names = "iis", "i2s_opclk0", + "i2s_opclk1"; + clocks = <&clk_audss CLK_I2S>, <&clk_audss CLK_I2S>, + <&clk_audss CLK_DOUT_AUD_BUS>; + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/clock/imx1-clock.txt b/Documentation/devicetree/bindings/clock/imx1-clock.txt new file mode 100644 index 0000000000000000000000000000000000000000..b7adf4e3ea987b3aad8919e8ab4f5e4efef34b9a --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx1-clock.txt @@ -0,0 +1,26 @@ +* Clock bindings for Freescale i.MX1 CPUs + +Required properties: +- compatible: Should be "fsl,imx1-ccm". +- reg: Address and length of the register set. +- #clock-cells: Should be <1>. + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx1-clock.h +for the full list of i.MX1 clock IDs. + +Examples: + clks: ccm@0021b000 { + #clock-cells = <1>; + compatible = "fsl,imx1-ccm"; + reg = <0x0021b000 0x1000>; + }; + + pwm: pwm@00208000 { + #pwm-cells = <2>; + compatible = "fsl,imx1-pwm"; + reg = <0x00208000 0x1000>; + interrupts = <34>; + clocks = <&clks IMX1_CLK_DUMMY>, <&clks IMX1_CLK_PER1>; + clock-names = "ipg", "per"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx21-clock.txt b/Documentation/devicetree/bindings/clock/imx21-clock.txt new file mode 100644 index 0000000000000000000000000000000000000000..c3b0db437c48da2bfa29431f3f45eae8c70597c1 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/imx21-clock.txt @@ -0,0 +1,28 @@ +* Clock bindings for Freescale i.MX21 + +Required properties: +- compatible : Should be "fsl,imx21-ccm". +- reg : Address and length of the register set. +- interrupts : Should contain CCM interrupt. +- #clock-cells: Should be <1>. + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx21-clock.h +for the full list of i.MX21 clock IDs. + +Examples: + clks: ccm@10027000{ + compatible = "fsl,imx21-ccm"; + reg = <0x10027000 0x800>; + #clock-cells = <1>; + }; + + uart1: serial@1000a000 { + compatible = "fsl,imx21-uart"; + reg = <0x1000a000 0x1000>; + interrupts = <20>; + clocks = <&clks IMX21_CLK_UART1_IPG_GATE>, + <&clks IMX21_CLK_PER1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx27-clock.txt b/Documentation/devicetree/bindings/clock/imx27-clock.txt index 6bc9fd2c6631435f74267f7c8b97e54d55eeeda1..cc05de9ec393574c740f77d1b74ed6694fcb9b80 100644 --- a/Documentation/devicetree/bindings/clock/imx27-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx27-clock.txt @@ -7,117 +7,22 @@ Required properties: - #clock-cells: Should be <1> The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX27 -clocks and IDs. - - Clock ID - ----------------------- - dummy 0 - ckih 1 - ckil 2 - mpll 3 - spll 4 - mpll_main2 5 - ahb 6 - ipg 7 - nfc_div 8 - per1_div 9 - per2_div 10 - per3_div 11 - per4_div 12 - vpu_sel 13 - vpu_div 14 - usb_div 15 - cpu_sel 16 - clko_sel 17 - cpu_div 18 - clko_div 19 - ssi1_sel 20 - ssi2_sel 21 - ssi1_div 22 - ssi2_div 23 - clko_en 24 - ssi2_ipg_gate 25 - ssi1_ipg_gate 26 - slcdc_ipg_gate 27 - sdhc3_ipg_gate 28 - sdhc2_ipg_gate 29 - sdhc1_ipg_gate 30 - scc_ipg_gate 31 - sahara_ipg_gate 32 - rtc_ipg_gate 33 - pwm_ipg_gate 34 - owire_ipg_gate 35 - lcdc_ipg_gate 36 - kpp_ipg_gate 37 - iim_ipg_gate 38 - i2c2_ipg_gate 39 - i2c1_ipg_gate 40 - gpt6_ipg_gate 41 - gpt5_ipg_gate 42 - gpt4_ipg_gate 43 - gpt3_ipg_gate 44 - gpt2_ipg_gate 45 - gpt1_ipg_gate 46 - gpio_ipg_gate 47 - fec_ipg_gate 48 - emma_ipg_gate 49 - dma_ipg_gate 50 - cspi3_ipg_gate 51 - cspi2_ipg_gate 52 - cspi1_ipg_gate 53 - nfc_baud_gate 54 - ssi2_baud_gate 55 - ssi1_baud_gate 56 - vpu_baud_gate 57 - per4_gate 58 - per3_gate 59 - per2_gate 60 - per1_gate 61 - usb_ahb_gate 62 - slcdc_ahb_gate 63 - sahara_ahb_gate 64 - lcdc_ahb_gate 65 - vpu_ahb_gate 66 - fec_ahb_gate 67 - emma_ahb_gate 68 - emi_ahb_gate 69 - dma_ahb_gate 70 - csi_ahb_gate 71 - brom_ahb_gate 72 - ata_ahb_gate 73 - wdog_ipg_gate 74 - usb_ipg_gate 75 - uart6_ipg_gate 76 - uart5_ipg_gate 77 - uart4_ipg_gate 78 - uart3_ipg_gate 79 - uart2_ipg_gate 80 - uart1_ipg_gate 81 - ckih_div1p5 82 - fpm 83 - mpll_osc_sel 84 - mpll_sel 85 - spll_gate 86 - mshc_div 87 - rtic_ipg_gate 88 - mshc_ipg_gate 89 - rtic_ahb_gate 90 - mshc_baud_gate 91 +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx27-clock.h +for the full list of i.MX27 clock IDs. Examples: + clks: ccm@10027000{ + compatible = "fsl,imx27-ccm"; + reg = <0x10027000 0x1000>; + #clock-cells = <1>; + }; -clks: ccm@10027000{ - compatible = "fsl,imx27-ccm"; - reg = <0x10027000 0x1000>; - #clock-cells = <1>; -}; - -uart1: serial@1000a000 { - compatible = "fsl,imx27-uart", "fsl,imx21-uart"; - reg = <0x1000a000 0x1000>; - interrupts = <20>; - clocks = <&clks 81>, <&clks 61>; - clock-names = "ipg", "per"; - status = "disabled"; -}; + uart1: serial@1000a000 { + compatible = "fsl,imx27-uart", "fsl,imx21-uart"; + reg = <0x1000a000 0x1000>; + interrupts = <20>; + clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; + clock-names = "ipg", "per"; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/clock/imx6q-clock.txt b/Documentation/devicetree/bindings/clock/imx6q-clock.txt index 90ec91fe5ce03a317437f49eb7b376c5f2140bba..9252912a5b0ea890668df648e092ca10c1da2164 100644 --- a/Documentation/devicetree/bindings/clock/imx6q-clock.txt +++ b/Documentation/devicetree/bindings/clock/imx6q-clock.txt @@ -7,223 +7,13 @@ Required properties: - #clock-cells: Should be <1> The clock consumer should specify the desired clock by having the clock -ID in its "clocks" phandle cell. The following is a full list of i.MX6Q -clocks and IDs. - - Clock ID - --------------------------- - dummy 0 - ckil 1 - ckih 2 - osc 3 - pll2_pfd0_352m 4 - pll2_pfd1_594m 5 - pll2_pfd2_396m 6 - pll3_pfd0_720m 7 - pll3_pfd1_540m 8 - pll3_pfd2_508m 9 - pll3_pfd3_454m 10 - pll2_198m 11 - pll3_120m 12 - pll3_80m 13 - pll3_60m 14 - twd 15 - step 16 - pll1_sw 17 - periph_pre 18 - periph2_pre 19 - periph_clk2_sel 20 - periph2_clk2_sel 21 - axi_sel 22 - esai_sel 23 - asrc_sel 24 - spdif_sel 25 - gpu2d_axi 26 - gpu3d_axi 27 - gpu2d_core_sel 28 - gpu3d_core_sel 29 - gpu3d_shader_sel 30 - ipu1_sel 31 - ipu2_sel 32 - ldb_di0_sel 33 - ldb_di1_sel 34 - ipu1_di0_pre_sel 35 - ipu1_di1_pre_sel 36 - ipu2_di0_pre_sel 37 - ipu2_di1_pre_sel 38 - ipu1_di0_sel 39 - ipu1_di1_sel 40 - ipu2_di0_sel 41 - ipu2_di1_sel 42 - hsi_tx_sel 43 - pcie_axi_sel 44 - ssi1_sel 45 - ssi2_sel 46 - ssi3_sel 47 - usdhc1_sel 48 - usdhc2_sel 49 - usdhc3_sel 50 - usdhc4_sel 51 - enfc_sel 52 - emi_sel 53 - emi_slow_sel 54 - vdo_axi_sel 55 - vpu_axi_sel 56 - cko1_sel 57 - periph 58 - periph2 59 - periph_clk2 60 - periph2_clk2 61 - ipg 62 - ipg_per 63 - esai_pred 64 - esai_podf 65 - asrc_pred 66 - asrc_podf 67 - spdif_pred 68 - spdif_podf 69 - can_root 70 - ecspi_root 71 - gpu2d_core_podf 72 - gpu3d_core_podf 73 - gpu3d_shader 74 - ipu1_podf 75 - ipu2_podf 76 - ldb_di0_podf 77 - ldb_di1_podf 78 - ipu1_di0_pre 79 - ipu1_di1_pre 80 - ipu2_di0_pre 81 - ipu2_di1_pre 82 - hsi_tx_podf 83 - ssi1_pred 84 - ssi1_podf 85 - ssi2_pred 86 - ssi2_podf 87 - ssi3_pred 88 - ssi3_podf 89 - uart_serial_podf 90 - usdhc1_podf 91 - usdhc2_podf 92 - usdhc3_podf 93 - usdhc4_podf 94 - enfc_pred 95 - enfc_podf 96 - emi_podf 97 - emi_slow_podf 98 - vpu_axi_podf 99 - cko1_podf 100 - axi 101 - mmdc_ch0_axi_podf 102 - mmdc_ch1_axi_podf 103 - arm 104 - ahb 105 - apbh_dma 106 - asrc 107 - can1_ipg 108 - can1_serial 109 - can2_ipg 110 - can2_serial 111 - ecspi1 112 - ecspi2 113 - ecspi3 114 - ecspi4 115 - ecspi5 116 - enet 117 - esai 118 - gpt_ipg 119 - gpt_ipg_per 120 - gpu2d_core 121 - gpu3d_core 122 - hdmi_iahb 123 - hdmi_isfr 124 - i2c1 125 - i2c2 126 - i2c3 127 - iim 128 - enfc 129 - ipu1 130 - ipu1_di0 131 - ipu1_di1 132 - ipu2 133 - ipu2_di0 134 - ldb_di0 135 - ldb_di1 136 - ipu2_di1 137 - hsi_tx 138 - mlb 139 - mmdc_ch0_axi 140 - mmdc_ch1_axi 141 - ocram 142 - openvg_axi 143 - pcie_axi 144 - pwm1 145 - pwm2 146 - pwm3 147 - pwm4 148 - per1_bch 149 - gpmi_bch_apb 150 - gpmi_bch 151 - gpmi_io 152 - gpmi_apb 153 - sata 154 - sdma 155 - spba 156 - ssi1 157 - ssi2 158 - ssi3 159 - uart_ipg 160 - uart_serial 161 - usboh3 162 - usdhc1 163 - usdhc2 164 - usdhc3 165 - usdhc4 166 - vdo_axi 167 - vpu_axi 168 - cko1 169 - pll1_sys 170 - pll2_bus 171 - pll3_usb_otg 172 - pll4_audio 173 - pll5_video 174 - pll8_mlb 175 - pll7_usb_host 176 - pll6_enet 177 - ssi1_ipg 178 - ssi2_ipg 179 - ssi3_ipg 180 - rom 181 - usbphy1 182 - usbphy2 183 - ldb_di0_div_3_5 184 - ldb_di1_div_3_5 185 - sata_ref 186 - sata_ref_100m 187 - pcie_ref 188 - pcie_ref_125m 189 - enet_ref 190 - usbphy1_gate 191 - usbphy2_gate 192 - pll4_post_div 193 - pll5_post_div 194 - pll5_video_div 195 - eim_slow 196 - spdif 197 - cko2_sel 198 - cko2_podf 199 - cko2 200 - cko 201 - vdoa 202 - pll4_audio_div 203 - lvds1_sel 204 - lvds2_sel 205 - lvds1_gate 206 - lvds2_gate 207 - esai_ahb 208 +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx6qdl-clock.h +for the full list of i.MX6 Quad and DualLite clock IDs. Examples: +#include + clks: ccm@020c4000 { compatible = "fsl,imx6q-ccm"; reg = <0x020c4000 0x4000>; @@ -235,7 +25,7 @@ uart1: serial@02020000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 0x04>; - clocks = <&clks 160>, <&clks 161>; + clocks = <&clks IMX6QDL_CLK_UART_IPG>, <&clks IMX6QDL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; status = "disabled"; }; diff --git a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt index feb830130714ad3710afb529105ab70e0e228c90..99c214660bdc7d13b3bedb19df003625b242563a 100644 --- a/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt +++ b/Documentation/devicetree/bindings/clock/mvebu-cpu-clock.txt @@ -3,14 +3,15 @@ Device Tree Clock bindings for cpu clock of Marvell EBU platforms Required properties: - compatible : shall be one of the following: "marvell,armada-xp-cpu-clock" - cpu clocks for Armada XP -- reg : Address and length of the clock complex register set +- reg : Address and length of the clock complex register set, followed + by address and length of the PMU DFS registers - #clock-cells : should be set to 1. - clocks : shall be the input parent clock phandle for the clock. cpuclk: clock-complex@d0018700 { #clock-cells = <1>; compatible = "marvell,armada-xp-cpu-clock"; - reg = <0xd0018700 0xA0>; + reg = <0xd0018700 0xA0>, <0x1c054 0x10>; clocks = <&coreclk 1>; } diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt new file mode 100644 index 0000000000000000000000000000000000000000..effd9401c13317934a38eeaa03e273a4c804d97e --- /dev/null +++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt @@ -0,0 +1,78 @@ +* Samsung S5P6442/S5PC110/S5PV210 Clock Controller + +Samsung S5P6442, S5PC110 and S5PV210 SoCs contain integrated clock +controller, which generates and supplies clock to various controllers +within the SoC. + +Required Properties: + +- compatible: should be one of following: + - "samsung,s5pv210-clock" : for clock controller of Samsung + S5PC110/S5PV210 SoCs, + - "samsung,s5p6442-clock" : for clock controller of Samsung + S5P6442 SoC. + +- reg: physical base address of the controller and length of memory mapped + region. + +- #clock-cells: should be 1. + +All available clocks are defined as preprocessor macros in +dt-bindings/clock/s5pv210.h header and can be used in device tree sources. + +External clocks: + +There are several clocks that are generated outside the SoC. It is expected +that they are defined using standard clock bindings with following +clock-output-names: + - "xxti": external crystal oscillator connected to XXTI and XXTO pins of +the SoC, + - "xusbxti": external crystal oscillator connected to XUSBXTI and XUSBXTO +pins of the SoC, + +A subset of above clocks available on given board shall be specified in +board device tree, including the system base clock, as selected by XOM[0] +pin of the SoC. Refer to generic fixed rate clock bindings +documentation[1] for more information how to specify these clocks. + +[1] Documentation/devicetree/bindings/clock/fixed-clock.txt + +Example: Clock controller node: + + clock: clock-controller@7e00f000 { + compatible = "samsung,s5pv210-clock"; + reg = <0x7e00f000 0x1000>; + #clock-cells = <1>; + }; + +Example: Required external clocks: + + xxti: clock-xxti { + compatible = "fixed-clock"; + clock-output-names = "xxti"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + + xusbxti: clock-xusbxti { + compatible = "fixed-clock"; + clock-output-names = "xusbxti"; + clock-frequency = <24000000>; + #clock-cells = <0>; + }; + +Example: UART controller node that consumes the clock generated by the clock + controller (refer to the standard clock bindings for information about + "clocks" and "clock-names" properties): + + uart0: serial@e2900000 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900000 0x400>; + interrupt-parent = <&vic1>; + interrupts = <10>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks UART0>, <&clocks UART0>, + <&clocks SCLK_UART0>; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt index e577196a12c0577821e68b4aa2fa6d0d9ef6bde3..4659fd952301b1b9967e74afb7cbbda5a62ee46c 100644 --- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt +++ b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt @@ -47,6 +47,7 @@ The full ID of peripheral types can be found below. 20 ASRC 21 ESAI 22 SSI Dual FIFO (needs firmware ver >= 2) + 23 Shared ASRC The third cell specifies the transfer priority as below. diff --git a/Documentation/devicetree/bindings/dma/mpc512x-dma.txt b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt new file mode 100644 index 0000000000000000000000000000000000000000..a6511df165c53cf9c4ae522d3a66d078e36bc660 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/mpc512x-dma.txt @@ -0,0 +1,29 @@ +* Freescale MPC512x and MPC8308 DMA Controller + +The DMA controller in Freescale MPC512x and MPC8308 SoCs can move +blocks of memory contents between memory and peripherals or +from memory to memory. + +Refer to "Generic DMA Controller and DMA request bindings" in +the dma/dma.txt file for a more detailed description of binding. + +Required properties: +- compatible: should be "fsl,mpc5121-dma" or "fsl,mpc8308-dma"; +- reg: should contain the DMA controller registers location and length; +- interrupt for the DMA controller: syntax of interrupt client node + is described in interrupt-controller/interrupts.txt file. +- #dma-cells: the length of the DMA specifier, must be <1>. + Each channel of this DMA controller has a peripheral request line, + the assignment is fixed in hardware. This one cell + in dmas property of a client device represents the channel number. + +Example: + + dma0: dma@14000 { + compatible = "fsl,mpc5121-dma"; + reg = <0x14000 0x1800>; + interrupts = <65 0x8>; + #dma-cells = <1>; + }; + +DMA clients must use the format described in dma/dma.txt file. diff --git a/Documentation/devicetree/bindings/dma/nbpfaxi.txt b/Documentation/devicetree/bindings/dma/nbpfaxi.txt new file mode 100644 index 0000000000000000000000000000000000000000..d5e2522b9ec1f004c4522519061bed369da04423 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/nbpfaxi.txt @@ -0,0 +1,61 @@ +* Renesas "Type-AXI" NBPFAXI* DMA controllers + +* DMA controller + +Required properties + +- compatible: must be one of + "renesas,nbpfaxi64dmac1b4" + "renesas,nbpfaxi64dmac1b8" + "renesas,nbpfaxi64dmac1b16" + "renesas,nbpfaxi64dmac4b4" + "renesas,nbpfaxi64dmac4b8" + "renesas,nbpfaxi64dmac4b16" + "renesas,nbpfaxi64dmac8b4" + "renesas,nbpfaxi64dmac8b8" + "renesas,nbpfaxi64dmac8b16" +- #dma-cells: must be 2: the first integer is a terminal number, to which this + slave is connected, the second one is flags. Flags is a bitmask + with the following bits defined: + +#define NBPF_SLAVE_RQ_HIGH 1 +#define NBPF_SLAVE_RQ_LOW 2 +#define NBPF_SLAVE_RQ_LEVEL 4 + +Optional properties: + +You can use dma-channels and dma-requests as described in dma.txt, although they +won't be used, this information is derived from the compatibility string. + +Example: + + dma: dma-controller@48000000 { + compatible = "renesas,nbpfaxi64dmac8b4"; + reg = <0x48000000 0x400>; + interrupts = <0 12 0x4 + 0 13 0x4 + 0 14 0x4 + 0 15 0x4 + 0 16 0x4 + 0 17 0x4 + 0 18 0x4 + 0 19 0x4>; + #dma-cells = <2>; + dma-channels = <8>; + dma-requests = <8>; + }; + +* DMA client + +Required properties: + +dmas and dma-names are required, as described in dma.txt. + +Example: + +#include + +... + dmas = <&dma 0 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL) + &dma 1 (NBPF_SLAVE_RQ_HIGH | NBPF_SLAVE_RQ_LEVEL)>; + dma-names = "rx", "tx"; diff --git a/Documentation/devicetree/bindings/dma/rcar-audmapp.txt b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt new file mode 100644 index 0000000000000000000000000000000000000000..9f1d750d76de9ff0d9858366e037a9635f353087 --- /dev/null +++ b/Documentation/devicetree/bindings/dma/rcar-audmapp.txt @@ -0,0 +1,29 @@ +* R-Car Audio DMAC peri peri Device Tree bindings + +Required properties: +- compatible: should be "renesas,rcar-audmapp" +- #dma-cells: should be <1>, see "dmas" property below + +Example: + audmapp: audio-dma-pp@0xec740000 { + compatible = "renesas,rcar-audmapp"; + #dma-cells = <1>; + + reg = <0 0xec740000 0 0x200>; + }; + + +* DMA client + +Required properties: +- dmas: a list of <[DMA multiplexer phandle] [SRS/DRS value]> pairs, + where SRS/DRS values are fixed handles, specified in the SoC + manual as the value that would be written into the PDMACHCR. +- dma-names: a list of DMA channel names, one per "dmas" entry + +Example: + + dmas = <&audmapp 0x2d00 + &audmapp 0x3700>; + dma-names = "src0_ssiu0", + "dvc0_ssiu0"; diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt new file mode 100644 index 0000000000000000000000000000000000000000..df0f48bcf75af42dea9f5aff2ee9e95c5f8b4b1e --- /dev/null +++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt @@ -0,0 +1,98 @@ +* Renesas R-Car DMA Controller Device Tree bindings + +Renesas R-Car Generation 2 SoCs have have multiple multi-channel DMA +controller instances named DMAC capable of serving multiple clients. Channels +can be dedicated to specific clients or shared between a large number of +clients. + +DMA clients are connected to the DMAC ports referenced by an 8-bit identifier +called MID/RID. + +Each DMA client is connected to one dedicated port of the DMAC, identified by +an 8-bit port number called the MID/RID. A DMA controller can thus serve up to +256 clients in total. When the number of hardware channels is lower than the +number of clients to be served, channels must be shared between multiple DMA +clients. The association of DMA clients to DMAC channels is fully dynamic and +not described in these device tree bindings. + +Required Properties: + +- compatible: must contain "renesas,rcar-dmac" + +- reg: base address and length of the registers block for the DMAC + +- interrupts: interrupt specifiers for the DMAC, one for each entry in + interrupt-names. +- interrupt-names: one entry per channel, named "ch%u", where %u is the + channel number ranging from zero to the number of channels minus one. + +- clock-names: "fck" for the functional clock +- clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. +- clock-names: must contain "fck" for the functional clock. + +- #dma-cells: must be <1>, the cell specifies the MID/RID of the DMAC port + connected to the DMA client +- dma-channels: number of DMA channels + +Example: R8A7790 (R-Car H2) SYS-DMACs + + dmac0: dma-controller@e6700000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6700000 0 0x20000>; + interrupts = <0 197 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC0>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; + + dmac1: dma-controller@e6720000 { + compatible = "renesas,rcar-dmac"; + reg = <0 0xe6720000 0 0x20000>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH + 0 308 IRQ_TYPE_LEVEL_HIGH + 0 309 IRQ_TYPE_LEVEL_HIGH + 0 310 IRQ_TYPE_LEVEL_HIGH + 0 311 IRQ_TYPE_LEVEL_HIGH + 0 312 IRQ_TYPE_LEVEL_HIGH + 0 313 IRQ_TYPE_LEVEL_HIGH + 0 314 IRQ_TYPE_LEVEL_HIGH + 0 315 IRQ_TYPE_LEVEL_HIGH + 0 316 IRQ_TYPE_LEVEL_HIGH + 0 317 IRQ_TYPE_LEVEL_HIGH + 0 318 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "error", + "ch0", "ch1", "ch2", "ch3", + "ch4", "ch5", "ch6", "ch7", + "ch8", "ch9", "ch10", "ch11", + "ch12", "ch13", "ch14"; + clocks = <&mstp2_clks R8A7790_CLK_SYS_DMAC1>; + clock-names = "fck"; + #dma-cells = <1>; + dma-channels = <15>; + }; diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index 1f5729f106216ecb079af2c4912fd61e20098585..95800ab37bb00cce3fdfe2278625e6ba47cdec69 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -35,9 +35,11 @@ Required properties: Each dmas request consists of 4 cells: 1. A phandle pointing to the DMA controller - 2. Device Type + 2. Device signal number, the signal line for single and burst requests + connected from the device to the DMA40 engine 3. The DMA request line number (only when 'use fixed channel' is set) - 4. A 32bit mask specifying; mode, direction and endianness [NB: This list will grow] + 4. A 32bit mask specifying; mode, direction and endianness + [NB: This list will grow] 0x00000001: Mode: Logical channel when unset Physical channel when set @@ -54,6 +56,74 @@ Each dmas request consists of 4 cells: Normal priority when unset High priority when set +Existing signal numbers for the DB8500 ASIC. Unless specified, the signals are +bidirectional, i.e. the same for RX and TX operations: + +0: SPI controller 0 +1: SD/MMC controller 0 (unused) +2: SD/MMC controller 1 (unused) +3: SD/MMC controller 2 (unused) +4: I2C port 1 +5: I2C port 3 +6: I2C port 2 +7: I2C port 4 +8: Synchronous Serial Port SSP0 +9: Synchronous Serial Port SSP1 +10: Multi-Channel Display Engine MCDE RX +11: UART port 2 +12: UART port 1 +13: UART port 0 +14: Multirate Serial Port MSP2 +15: I2C port 0 +16: USB OTG in/out endpoints 7 & 15 +17: USB OTG in/out endpoints 6 & 14 +18: USB OTG in/out endpoints 5 & 13 +19: USB OTG in/out endpoints 4 & 12 +20: SLIMbus or HSI channel 0 +21: SLIMbus or HSI channel 1 +22: SLIMbus or HSI channel 2 +23: SLIMbus or HSI channel 3 +24: Multimedia DSP SXA0 +25: Multimedia DSP SXA1 +26: Multimedia DSP SXA2 +27: Multimedia DSP SXA3 +28: SD/MM controller 2 +29: SD/MM controller 0 +30: MSP port 1 on DB8500 v1, MSP port 3 on DB8500 v2 +31: MSP port 0 or SLIMbus channel 0 +32: SD/MM controller 1 +33: SPI controller 2 +34: i2c3 RX2 TX2 +35: SPI controller 1 +36: USB OTG in/out endpoints 3 & 11 +37: USB OTG in/out endpoints 2 & 10 +38: USB OTG in/out endpoints 1 & 9 +39: USB OTG in/out endpoints 8 +40: SPI controller 3 +41: SD/MM controller 3 +42: SD/MM controller 4 +43: SD/MM controller 5 +44: Multimedia DSP SXA4 +45: Multimedia DSP SXA5 +46: SLIMbus channel 8 or Multimedia DSP SXA6 +47: SLIMbus channel 9 or Multimedia DSP SXA7 +48: Crypto Accelerator 1 +49: Crypto Accelerator 1 TX or Hash Accelerator 1 TX +50: Hash Accelerator 1 TX +51: memcpy TX (to be used by the DMA driver for memcpy operations) +52: SLIMbus or HSI channel 4 +53: SLIMbus or HSI channel 5 +54: SLIMbus or HSI channel 6 +55: SLIMbus or HSI channel 7 +56: memcpy (to be used by the DMA driver for memcpy operations) +57: memcpy (to be used by the DMA driver for memcpy operations) +58: memcpy (to be used by the DMA driver for memcpy operations) +59: memcpy (to be used by the DMA driver for memcpy operations) +60: memcpy (to be used by the DMA driver for memcpy operations) +61: Crypto Accelerator 0 +62: Crypto Accelerator 0 TX or Hash Accelerator 0 TX +63: Hash Accelerator 0 TX + Example: uart@80120000 { diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt new file mode 100644 index 0000000000000000000000000000000000000000..3e145c1675b1ec1e5d7f123cf9dc5456fc72960b --- /dev/null +++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt @@ -0,0 +1,45 @@ +Allwinner A31 DMA Controller + +This driver follows the generic DMA bindings defined in dma.txt. + +Required properties: + +- compatible: Must be "allwinner,sun6i-a31-dma" +- reg: Should contain the registers base address and length +- interrupts: Should contain a reference to the interrupt used by this device +- clocks: Should contain a reference to the parent AHB clock +- resets: Should contain a reference to the reset controller asserting + this device in reset +- #dma-cells : Should be 1, a single cell holding a line request number + +Example: + dma: dma-controller@01c02000 { + compatible = "allwinner,sun6i-a31-dma"; + reg = <0x01c02000 0x1000>; + interrupts = <0 50 4>; + clocks = <&ahb1_gates 6>; + resets = <&ahb1_rst 6>; + #dma-cells = <1>; + }; + +Clients: + +DMA clients connected to the A31 DMA controller must use the format +described in the dma.txt file, using a two-cell specifier for each +channel: a phandle plus one integer cells. +The two cells in order are: + +1. A phandle pointing to the DMA controller. +2. The port ID as specified in the datasheet + +Example: +spi2: spi@01c6a000 { + compatible = "allwinner,sun6i-a31-spi"; + reg = <0x01c6a000 0x1000>; + interrupts = <0 67 4>; + clocks = <&ahb1_gates 22>, <&spi2_clk>; + clock-names = "ahb", "mod"; + dmas = <&dma 25>, <&dma 25>; + dma-names = "rx", "tx"; + resets = <&ahb1_rst 22>; +}; diff --git a/Documentation/devicetree/bindings/drm/armada/marvell,dove-lcd.txt b/Documentation/devicetree/bindings/drm/armada/marvell,dove-lcd.txt new file mode 100644 index 0000000000000000000000000000000000000000..46525ea3e646e9b1dc1d0005283f0464817699d0 --- /dev/null +++ b/Documentation/devicetree/bindings/drm/armada/marvell,dove-lcd.txt @@ -0,0 +1,30 @@ +Device Tree bindings for Armada DRM CRTC driver + +Required properties: + - compatible: value should be "marvell,dove-lcd". + - reg: base address and size of the LCD controller + - interrupts: single interrupt number for the LCD controller + - port: video output port with endpoints, as described by graph.txt + +Optional properties: + + - clocks: as described by clock-bindings.txt + - clock-names: as described by clock-bindings.txt + "axiclk" - axi bus clock for pixel clock + "plldivider" - pll divider clock for pixel clock + "ext_ref_clk0" - external clock 0 for pixel clock + "ext_ref_clk1" - external clock 1 for pixel clock + +Note: all clocks are optional but at least one must be specified. +Further clocks may be added in the future according to requirements of +different SoCs. + +Example: + + lcd0: lcd-controller@820000 { + compatible = "marvell,dove-lcd"; + reg = <0x820000 0x1000>; + interrupts = <47>; + clocks = <&si5351 0>; + clock-names = "ext_ref_clk_1"; + }; diff --git a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt index d7df01c5bb3ab8945938b2e47cf9e3a8ea94b97e..e9e4bce40760e2d742160956943930b72c01b656 100644 --- a/Documentation/devicetree/bindings/drm/i2c/tda998x.txt +++ b/Documentation/devicetree/bindings/drm/i2c/tda998x.txt @@ -3,6 +3,8 @@ Device-Tree bindings for the NXP TDA998x HDMI transmitter Required properties; - compatible: must be "nxp,tda998x" + - reg: I2C address + Optional properties: - interrupts: interrupt number and trigger type default: polling diff --git a/Documentation/devicetree/bindings/drm/msm/gpu.txt b/Documentation/devicetree/bindings/drm/msm/gpu.txt new file mode 100644 index 0000000000000000000000000000000000000000..67d0a58dbb778cbaa0619132899c77c72451099a --- /dev/null +++ b/Documentation/devicetree/bindings/drm/msm/gpu.txt @@ -0,0 +1,52 @@ +Qualcomm adreno/snapdragon GPU + +Required properties: +- compatible: "qcom,adreno-3xx" +- reg: Physical base address and length of the controller's registers. +- interrupts: The interrupt signal from the gpu. +- clocks: device clocks + See ../clocks/clock-bindings.txt for details. +- clock-names: the following clocks are required: + * "core_clk" + * "iface_clk" + * "mem_iface_clk" +- qcom,chipid: gpu chip-id. Note this may become optional for future + devices if we can reliably read the chipid from hw +- qcom,gpu-pwrlevels: list of operating points + - compatible: "qcom,gpu-pwrlevels" + - for each qcom,gpu-pwrlevel: + - qcom,gpu-freq: requested gpu clock speed + - NOTE: downstream android driver defines additional parameters to + configure memory bandwidth scaling per OPP. + +Example: + +/ { + ... + + gpu: qcom,kgsl-3d0@4300000 { + compatible = "qcom,adreno-3xx"; + reg = <0x04300000 0x20000>; + reg-names = "kgsl_3d0_reg_memory"; + interrupts = ; + interrupt-names = "kgsl_3d0_irq"; + clock-names = + "core_clk", + "iface_clk", + "mem_iface_clk"; + clocks = + <&mmcc GFX3D_CLK>, + <&mmcc GFX3D_AHB_CLK>, + <&mmcc MMSS_IMEM_AHB_CLK>; + qcom,chipid = <0x03020100>; + qcom,gpu-pwrlevels { + compatible = "qcom,gpu-pwrlevels"; + qcom,gpu-pwrlevel@0 { + qcom,gpu-freq = <450000000>; + }; + qcom,gpu-pwrlevel@1 { + qcom,gpu-freq = <27000000>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/drm/msm/hdmi.txt b/Documentation/devicetree/bindings/drm/msm/hdmi.txt new file mode 100644 index 0000000000000000000000000000000000000000..aca917fe2ba7acc2077ec4ada2a461dc1a1871c1 --- /dev/null +++ b/Documentation/devicetree/bindings/drm/msm/hdmi.txt @@ -0,0 +1,46 @@ +Qualcomm adreno/snapdragon hdmi output + +Required properties: +- compatible: one of the following + * "qcom,hdmi-tx-8660" + * "qcom,hdmi-tx-8960" +- reg: Physical base address and length of the controller's registers +- reg-names: "core_physical" +- interrupts: The interrupt signal from the hdmi block. +- clocks: device clocks + See ../clocks/clock-bindings.txt for details. +- qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin +- qcom,hdmi-tx-ddc-data-gpio: ddc data pin +- qcom,hdmi-tx-hpd-gpio: hpd pin +- core-vdda-supply: phandle to supply regulator +- hdmi-mux-supply: phandle to mux regulator + +Optional properties: +- qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin +- qcom,hdmi-tx-mux-sel-gpio: hdmi mux select pin + +Example: + +/ { + ... + + hdmi: qcom,hdmi-tx-8960@4a00000 { + compatible = "qcom,hdmi-tx-8960"; + reg-names = "core_physical"; + reg = <0x04a00000 0x1000>; + interrupts = ; + clock-names = + "core_clk", + "master_iface_clk", + "slave_iface_clk"; + clocks = + <&mmcc HDMI_APP_CLK>, + <&mmcc HDMI_M_AHB_CLK>, + <&mmcc HDMI_S_AHB_CLK>; + qcom,hdmi-tx-ddc-clk = <&msmgpio 70 GPIO_ACTIVE_HIGH>; + qcom,hdmi-tx-ddc-data = <&msmgpio 71 GPIO_ACTIVE_HIGH>; + qcom,hdmi-tx-hpd = <&msmgpio 72 GPIO_ACTIVE_HIGH>; + core-vdda-supply = <&pm8921_hdmi_mvs>; + hdmi-mux-supply = <&ext_3p3v>; + }; +}; diff --git a/Documentation/devicetree/bindings/drm/msm/mdp.txt b/Documentation/devicetree/bindings/drm/msm/mdp.txt new file mode 100644 index 0000000000000000000000000000000000000000..1a0598e5279df04cf63e581066309744f06df3ab --- /dev/null +++ b/Documentation/devicetree/bindings/drm/msm/mdp.txt @@ -0,0 +1,48 @@ +Qualcomm adreno/snapdragon display controller + +Required properties: +- compatible: + * "qcom,mdp" - mdp4 +- reg: Physical base address and length of the controller's registers. +- interrupts: The interrupt signal from the display controller. +- connectors: array of phandles for output device(s) +- clocks: device clocks + See ../clocks/clock-bindings.txt for details. +- clock-names: the following clocks are required: + * "core_clk" + * "iface_clk" + * "lut_clk" + * "src_clk" + * "hdmi_clk" + * "mpd_clk" + +Optional properties: +- gpus: phandle for gpu device + +Example: + +/ { + ... + + mdp: qcom,mdp@5100000 { + compatible = "qcom,mdp"; + reg = <0x05100000 0xf0000>; + interrupts = ; + connectors = <&hdmi>; + gpus = <&gpu>; + clock-names = + "core_clk", + "iface_clk", + "lut_clk", + "src_clk", + "hdmi_clk", + "mdp_clk"; + clocks = + <&mmcc MDP_SRC>, + <&mmcc MDP_AHB_CLK>, + <&mmcc MDP_LUT_CLK>, + <&mmcc TV_SRC>, + <&mmcc HDMI_TV_CLK>, + <&mmcc MDP_TV_CLK>; + }; +}; diff --git a/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt new file mode 100644 index 0000000000000000000000000000000000000000..4ecda224955f21178f363d34027b9768a90fd0ab --- /dev/null +++ b/Documentation/devicetree/bindings/extcon/extcon-sm5502.txt @@ -0,0 +1,23 @@ + +* SM5502 MUIC (Micro-USB Interface Controller) device + +The Silicon Mitus SM5502 is a MUIC (Micro-USB Interface Controller) device +which can detect the state of external accessory when external accessory is +attached or detached and button is pressed or released. It is interfaced to +the host controller using an I2C interface. + +Required properties: +- compatible: Should be "siliconmitus,sm5502-muic" +- reg: Specifies the I2C slave address of the MUIC block. It should be 0x25 +- interrupt-parent: Specifies the phandle of the interrupt controller to which + the interrupts from sm5502 are delivered to. +- interrupts: Interrupt specifiers for detection interrupt sources. + +Example: + + sm5502@25 { + compatible = "siliconmitus,sm5502-muic"; + interrupt-parent = <&gpx1>; + interrupts = <5 0>; + reg = <0x25>; + }; diff --git a/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt new file mode 100644 index 0000000000000000000000000000000000000000..d8c98c7614d04d8107d46b67746d1c9ff537d6ba --- /dev/null +++ b/Documentation/devicetree/bindings/fuse/nvidia,tegra20-fuse.txt @@ -0,0 +1,40 @@ +NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 fuse block. + +Required properties: +- compatible : should be: + "nvidia,tegra20-efuse" + "nvidia,tegra30-efuse" + "nvidia,tegra114-efuse" + "nvidia,tegra124-efuse" + Details: + nvidia,tegra20-efuse: Tegra20 requires using APB DMA to read the fuse data + due to a hardware bug. Tegra20 also lacks certain information which is + available in later generations such as fab code, lot code, wafer id,.. + nvidia,tegra30-efuse, nvidia,tegra114-efuse and nvidia,tegra124-efuse: + The differences between these SoCs are the size of the efuse array, + the location of the spare (OEM programmable) bits and the location of + the speedo data. +- reg: Should contain 1 entry: the entry gives the physical address and length + of the fuse registers. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - fuse +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - fuse + +Example: + + fuse@7000f800 { + compatible = "nvidia,tegra20-efuse"; + reg = <0x7000F800 0x400>, + <0x70000000 0x400>; + clocks = <&tegra_car TEGRA20_CLK_FUSE>; + clock-names = "fuse"; + resets = <&tegra_car 39>; + reset-names = "fuse"; + }; + + diff --git a/Documentation/devicetree/bindings/gpio/gpio-zynq.txt b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt new file mode 100644 index 0000000000000000000000000000000000000000..986371a4be2c8ae4eae2a09469e5916ccfb6deb1 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-zynq.txt @@ -0,0 +1,26 @@ +Xilinx Zynq GPIO controller Device Tree Bindings +------------------------------------------- + +Required properties: +- #gpio-cells : Should be two + - First cell is the GPIO line number + - Second cell is used to specify optional + parameters (unused) +- compatible : Should be "xlnx,zynq-gpio-1.0" +- clocks : Clock specifier (see clock bindings for details) +- gpio-controller : Marks the device node as a GPIO controller. +- interrupts : Interrupt specifier (see interrupt bindings for + details) +- interrupt-parent : Must be core interrupt controller +- reg : Address and length of the register set for the device + +Example: + gpio@e000a000 { + #gpio-cells = <2>; + compatible = "xlnx,zynq-gpio-1.0"; + clocks = <&clkc 42>; + gpio-controller; + interrupt-parent = <&intc>; + interrupts = <0 20 4>; + reg = <0xe000a000 0x1000>; + }; diff --git a/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt new file mode 100644 index 0000000000000000000000000000000000000000..23bfe8e1f7cce57c105495584563e04ee8b5eec2 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/nvidia,gk20a.txt @@ -0,0 +1,43 @@ +NVIDIA GK20A Graphics Processing Unit + +Required properties: +- compatible: "nvidia,-" + Currently recognized values: + - nvidia,tegra124-gk20a +- reg: Physical base address and length of the controller's registers. + Must contain two entries: + - first entry for bar0 + - second entry for bar1 +- interrupts: Must contain an entry for each entry in interrupt-names. + See ../interrupt-controller/interrupts.txt for details. +- interrupt-names: Must include the following entries: + - stall + - nonstall +- vdd-supply: regulator for supply voltage. +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - gpu + - pwr +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - gpu + +Example: + + gpu@0,57000000 { + compatible = "nvidia,gk20a"; + reg = <0x0 0x57000000 0x0 0x01000000>, + <0x0 0x58000000 0x0 0x01000000>; + interrupts = , + ; + interrupt-names = "stall", "nonstall"; + vdd-supply = <&vdd_gpu>; + clocks = <&tegra_car TEGRA124_CLK_GPU>, + <&tegra_car TEGRA124_CLK_PLL_P_OUT5>; + clock-names = "gpu", "pwr"; + resets = <&tegra_car 184>; + reset-names = "gpu"; + status = "disabled"; + }; diff --git a/Documentation/devicetree/bindings/gpu/st,stih4xx.txt b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt new file mode 100644 index 0000000000000000000000000000000000000000..2d150c311a0539e0caa9ab302bf9943c18eb0fc1 --- /dev/null +++ b/Documentation/devicetree/bindings/gpu/st,stih4xx.txt @@ -0,0 +1,189 @@ +STMicroelectronics stih4xx platforms + +- sti-vtg: video timing generator + Required properties: + - compatible: "st,vtg" + - reg: Physical base address of the IP registers and length of memory mapped region. + Optional properties: + - interrupts : VTG interrupt number to the CPU. + - st,slave: phandle on a slave vtg + +- sti-vtac: video timing advanced inter dye communication Rx and TX + Required properties: + - compatible: "st,vtac-main" or "st,vtac-aux" + - reg: Physical base address of the IP registers and length of memory mapped region. + - clocks: from common clock binding: handle hardware IP needed clocks, the + number of clocks may depend of the SoC type. + See ../clocks/clock-bindings.txt for details. + - clock-names: names of the clocks listed in clocks property in the same + order. + +- sti-display-subsystem: Master device for DRM sub-components + This device must be the parent of all the sub-components and is responsible + of bind them. + Required properties: + - compatible: "st,sti-display-subsystem" + - ranges: to allow probing of subdevices + +- sti-compositor: frame compositor engine + must be a child of sti-display-subsystem + Required properties: + - compatible: "st,stih-compositor" + - reg: Physical base address of the IP registers and length of memory mapped region. + - clocks: from common clock binding: handle hardware IP needed clocks, the + number of clocks may depend of the SoC type. + See ../clocks/clock-bindings.txt for details. + - clock-names: names of the clocks listed in clocks property in the same + order. + - resets: resets to be used by the device + See ../reset/reset.txt for details. + - reset-names: names of the resets listed in resets property in the same + order. + - st,vtg: phandle(s) on vtg device (main and aux) nodes. + +- sti-tvout: video out hardware block + must be a child of sti-display-subsystem + Required properties: + - compatible: "st,stih-tvout" + - reg: Physical base address of the IP registers and length of memory mapped region. + - reg-names: names of the mapped memory regions listed in regs property in + the same order. + - resets: resets to be used by the device + See ../reset/reset.txt for details. + - reset-names: names of the resets listed in resets property in the same + order. + - ranges: to allow probing of subdevices + +- sti-hdmi: hdmi output block + must be a child of sti-tvout + Required properties: + - compatible: "st,stih-hdmi"; + - reg: Physical base address of the IP registers and length of memory mapped region. + - reg-names: names of the mapped memory regions listed in regs property in + the same order. + - interrupts : HDMI interrupt number to the CPU. + - interrupt-names: name of the interrupts listed in interrupts property in + the same order + - clocks: from common clock binding: handle hardware IP needed clocks, the + number of clocks may depend of the SoC type. + - clock-names: names of the clocks listed in clocks property in the same + order. + - hdmi,hpd-gpio: gpio id to detect if an hdmi cable is plugged or not. + +sti-hda: + Required properties: + must be a child of sti-tvout + - compatible: "st,stih-hda" + - reg: Physical base address of the IP registers and length of memory mapped region. + - reg-names: names of the mapped memory regions listed in regs property in + the same order. + - clocks: from common clock binding: handle hardware IP needed clocks, the + number of clocks may depend of the SoC type. + See ../clocks/clock-bindings.txt for details. + - clock-names: names of the clocks listed in clocks property in the same + order. + +Example: + +/ { + ... + + vtg_main_slave: sti-vtg-main-slave@fe85A800 { + compatible = "st,vtg"; + reg = <0xfe85A800 0x300>; + interrupts = ; + }; + + vtg_main: sti-vtg-main-master@fd348000 { + compatible = "st,vtg"; + reg = <0xfd348000 0x400>; + st,slave = <&vtg_main_slave>; + }; + + vtg_aux_slave: sti-vtg-aux-slave@fd348400 { + compatible = "st,vtg"; + reg = <0xfe858200 0x300>; + interrupts = ; + }; + + vtg_aux: sti-vtg-aux-master@fd348400 { + compatible = "st,vtg"; + reg = <0xfd348400 0x400>; + st,slave = <&vtg_aux_slave>; + }; + + + sti-vtac-rx-main@fee82800 { + compatible = "st,vtac-main"; + reg = <0xfee82800 0x200>; + clock-names = "vtac"; + clocks = <&clk_m_a2_div0 CLK_M_VTAC_MAIN_PHY>; + }; + + sti-vtac-rx-aux@fee82a00 { + compatible = "st,vtac-aux"; + reg = <0xfee82a00 0x200>; + clock-names = "vtac"; + clocks = <&clk_m_a2_div0 CLK_M_VTAC_AUX_PHY>; + }; + + sti-vtac-tx-main@fd349000 { + compatible = "st,vtac-main"; + reg = <0xfd349000 0x200>, <0xfd320000 0x10000>; + clock-names = "vtac"; + clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>; + }; + + sti-vtac-tx-aux@fd349200 { + compatible = "st,vtac-aux"; + reg = <0xfd349200 0x200>, <0xfd320000 0x10000>; + clock-names = "vtac"; + clocks = <&clk_s_a1_hs CLK_S_VTAC_TX_PHY>; + }; + + sti-display-subsystem { + compatible = "st,sti-display-subsystem"; + ranges; + + sti-compositor@fd340000 { + compatible = "st,stih416-compositor"; + reg = <0xfd340000 0x1000>; + clock-names = "compo_main", "compo_aux", + "pix_main", "pix_aux"; + clocks = <&clk_m_a2_div1 CLK_M_COMPO_MAIN>, <&clk_m_a2_div1 CLK_M_COMPO_AUX>, + <&clockgen_c_vcc CLK_S_PIX_MAIN>, <&clockgen_c_vcc CLK_S_PIX_AUX>; + reset-names = "compo-main", "compo-aux"; + resets = <&softreset STIH416_COMPO_M_SOFTRESET>, <&softreset STIH416_COMPO_A_SOFTRESET>; + st,vtg = <&vtg_main>, <&vtg_aux>; + }; + + sti-tvout@fe000000 { + compatible = "st,stih416-tvout"; + reg = <0xfe000000 0x1000>, <0xfe85a000 0x400>, <0xfe830000 0x10000>; + reg-names = "tvout-reg", "hda-reg", "syscfg"; + reset-names = "tvout"; + resets = <&softreset STIH416_HDTVOUT_SOFTRESET>; + ranges; + + sti-hdmi@fe85c000 { + compatible = "st,stih416-hdmi"; + reg = <0xfe85c000 0x1000>, <0xfe830000 0x10000>; + reg-names = "hdmi-reg", "syscfg"; + interrupts = ; + interrupt-names = "irq"; + clock-names = "pix", "tmds", "phy", "audio"; + clocks = <&clockgen_c_vcc CLK_S_PIX_HDMI>, <&clockgen_c_vcc CLK_S_TMDS_HDMI>, <&clockgen_c_vcc CLK_S_HDMI_REJECT_PLL>, <&clockgen_b1 CLK_S_PCM_0>; + hdmi,hpd-gpio = <&PIO2 5>; + }; + + sti-hda@fe85a000 { + compatible = "st,stih416-hda"; + reg = <0xfe85a000 0x400>, <0xfe83085c 0x4>; + reg-names = "hda-reg", "video-dacs-ctrl"; + clock-names = "pix", "hddac"; + clocks = <&clockgen_c_vcc CLK_S_PIX_HD>, <&clockgen_c_vcc CLK_S_HDDAC>; + }; + }; + }; + ... +}; diff --git a/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt new file mode 100644 index 0000000000000000000000000000000000000000..f93242be60a145b1d823999f3c52e81a2ec63d1c --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/ibmpowernv.txt @@ -0,0 +1,23 @@ +IBM POWERNV platform sensors +---------------------------- + +Required node properties: +- compatible: must be one of + "ibm,opal-sensor-cooling-fan" + "ibm,opal-sensor-amb-temp" + "ibm,opal-sensor-power-supply" + "ibm,opal-sensor-power" +- sensor-id: an opaque id provided by the firmware to the kernel, identifies a + given sensor and its attribute data + +Example sensors node: + +cooling-fan#8-data { + sensor-id = <0x7052107>; + compatible = "ibm,opal-sensor-cooling-fan"; +}; + +amb-temp#1-thrs { + sensor-id = <0x5096000>; + compatible = "ibm,opal-sensor-amb-temp"; +}; diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt index b117b2e9e1a7fa51c814e9ea6e85ed2e8b50e8fe..2391e5c41999afd69df9feafc1f70b15accfefe0 100644 --- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt @@ -3,6 +3,7 @@ NTC Thermistor hwmon sensors Requires node properties: - "compatible" value : one of + "epcos,b57330v2103" "murata,ncp15wb473" "murata,ncp18wb473" "murata,ncp21wb473" diff --git a/Documentation/devicetree/bindings/hwmon/pwm-fan.txt b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt new file mode 100644 index 0000000000000000000000000000000000000000..610757ce449213aa03765b1c476785433c1afa24 --- /dev/null +++ b/Documentation/devicetree/bindings/hwmon/pwm-fan.txt @@ -0,0 +1,12 @@ +Bindings for a fan connected to the PWM lines + +Required properties: +- compatible : "pwm-fan" +- pwms : the PWM that is used to control the PWM fan + +Example: + pwm-fan { + compatible = "pwm-fan"; + status = "okay"; + pwms = <&pwm 0 10000 0>; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt index fc15ac5194370d695d89b5d88c2652156358b6ea..50b25c3da186e0f625c2715d123509820a8c98c1 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-efm32.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-efm32.txt @@ -10,7 +10,7 @@ Required properties : Recommended properties : - clock-frequency : maximal I2C bus clock frequency in Hz. - - efm32,location : Decides the location of the USART I/O pins. + - energymicro,location : Decides the location of the USART I/O pins. Allowed range : [0 .. 6] Example: @@ -23,7 +23,7 @@ Example: clocks = <&cmu clk_HFPERCLKI2C0>; clock-frequency = <100000>; status = "ok"; - efm32,location = <3>; + energymicro,location = <3>; eeprom@50 { compatible = "microchip,24c02"; diff --git a/Documentation/devicetree/bindings/i2c/trivial-devices.txt b/Documentation/devicetree/bindings/i2c/trivial-devices.txt index bef86e57c3889d4890ddd0212867c087ac72e989..6af570ec53b4b5b9ea96bcc42a722007265d96aa 100644 --- a/Documentation/devicetree/bindings/i2c/trivial-devices.txt +++ b/Documentation/devicetree/bindings/i2c/trivial-devices.txt @@ -50,6 +50,7 @@ epson,rx8581 I2C-BUS INTERFACE REAL TIME CLOCK MODULE fsl,mag3110 MAG3110: Xtrinsic High Accuracy, 3D Magnetometer fsl,mc13892 MC13892: Power Management Integrated Circuit (PMIC) for i.MX35/51 fsl,mma8450 MMA8450Q: Xtrinsic Low-power, 3-axis Xtrinsic Accelerometer +fsl,mma8452 MMA8452Q: 3-axis 12-bit / 8-bit Digital Accelerometer fsl,mpr121 MPR121: Proximity Capacitive Touch Sensor Controller fsl,sgtl5000 SGTL5000: Ultra Low-Power Audio Codec gmt,g751 G751: Digital Temperature Sensor and Thermal Watchdog with Two-Wire Interface @@ -69,6 +70,7 @@ nuvoton,npct501 i2c trusted platform module (TPM) nxp,pca9556 Octal SMBus and I2C registered interface nxp,pca9557 8-bit I2C-bus and SMBus I/O port with reset nxp,pcf8563 Real-time clock/calendar +nxp,pcf85063 Tiny Real-Time Clock ovti,ov5642 OV5642: Color CMOS QSXGA (5-megapixel) Image Sensor with OmniBSI and Embedded TrueFocus pericom,pt7c4338 Real-time Clock Module plx,pex8648 48-Lane, 12-Port PCI Express Gen 2 (5.0 GT/s) Switch @@ -83,5 +85,6 @@ stm,m41t80 M41T80 - SERIAL ACCESS RTC WITH ALARMS taos,tsl2550 Ambient Light Sensor with SMBUS/Two Wire Serial Interface ti,tsc2003 I2C Touch-Screen Controller ti,tmp102 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface +ti,tmp103 Low Power Digital Temperature Sensor with SMBUS/Two Wire Serial Interface ti,tmp275 Digital Temperature Sensor winbond,wpct301 i2c trusted platform module (TPM) diff --git a/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt new file mode 100644 index 0000000000000000000000000000000000000000..a8770cc6bcad1ec003834fb30ae14be859340042 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/max1027-adc.txt @@ -0,0 +1,22 @@ +* Maxim 1027/1029/1031 Analog to Digital Converter (ADC) + +Required properties: + - compatible: Should be "maxim,max1027" or "maxim,max1029" or "maxim,max1031" + - reg: SPI chip select number for the device + - interrupt-parent: phandle to the parent interrupt controller + see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + - interrupts: IRQ line for the ADC + see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt + +Recommended properties: +- spi-max-frequency: Definition as per + Documentation/devicetree/bindings/spi/spi-bus.txt + +Example: +adc@0 { + compatible = "maxim,max1027"; + reg = <0>; + interrupt-parent = <&gpio5>; + interrupts = <15 IRQ_TYPE_EDGE_RISING>; + spi-max-frequency = <1000000>; +}; diff --git a/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt index 90d5f34db04e2af845a142969a8b22a1125e18a1..8e191eef014e6112696b3c82678fb20dbe3dc553 100644 --- a/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt +++ b/Documentation/devicetree/bindings/iio/magnetometer/hmc5843.txt @@ -3,6 +3,10 @@ Required properties: - compatible : should be "honeywell,hmc5843" + Other models which are supported with driver are: + "honeywell,hmc5883" + "honeywell,hmc5883l" + "honeywell,hmc5983" - reg : the I2C address of the magnetometer - typically 0x1e Optional properties: diff --git a/Documentation/devicetree/bindings/iio/st-sensors.txt b/Documentation/devicetree/bindings/iio/st-sensors.txt new file mode 100644 index 0000000000000000000000000000000000000000..a7a0a15913ad21727c71f4a40ec5cc7a01044e61 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/st-sensors.txt @@ -0,0 +1,54 @@ +STMicroelectronics MEMS sensors + +The STMicroelectronics sensor devices are pretty straight-forward I2C or +SPI devices, all sharing the same device tree descriptions no matter what +type of sensor it is. + +Required properties: +- compatible: see the list of valid compatible strings below +- reg: the I2C or SPI address the device will respond to + +Optional properties: +- vdd-supply: an optional regulator that needs to be on to provide VDD + power to the sensor. +- vddio-supply: an optional regulator that needs to be on to provide the + VDD IO power to the sensor. +- st,drdy-int-pin: the pin on the package that will be used to signal + "data ready" (valid values: 1 or 2). This property is not configurable + on all sensors. + +Sensors may also have applicable pin control settings, those use the +standard bindings from pinctrl/pinctrl-bindings.txt. + +Valid compatible strings: + +Accelerometers: +- st,lsm303dlh-accel +- st,lsm303dlhc-accel +- st,lis3dh-accel +- st,lsm330d-accel +- st,lsm330dl-accel +- st,lsm330dlc-accel +- st,lis331dlh-accel +- st,lsm303dl-accel +- st,lsm303dlm-accel +- st,lsm330-accel + +Gyroscopes: +- st,l3g4200d-gyro +- st,lsm330d-gyro +- st,lsm330dl-gyro +- st,lsm330dlc-gyro +- st,l3gd20-gyro +- st,l3g4is-gyro +- st,lsm330-gyro + +Magnetometers: +- st,lsm303dlhc-magn +- st,lsm303dlm-magn +- st,lis3mdl-magn + +Pressure sensors: +- st,lps001wp-press +- st,lps25h-press +- st,lps331ap-press diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt new file mode 100644 index 0000000000000000000000000000000000000000..baef432e83690af95ed6e3b49c1636c90f8ba135 --- /dev/null +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt @@ -0,0 +1,25 @@ +Atmel maXTouch touchscreen/touchpad + +Required properties: +- compatible: + atmel,maxtouch + +- reg: The I2C address of the device + +- interrupts: The sink for the touchpad's IRQ output + See ../interrupt-controller/interrupts.txt + +Optional properties for main touchpad device: + +- linux,gpio-keymap: An array of up to 4 entries indicating the Linux + keycode generated by each GPIO. Linux keycodes are defined in + . + +Example: + + touch@4b { + compatible = "atmel,maxtouch"; + reg = <0x4b>; + interrupt-parent = <&gpio>; + interrupts = ; + }; diff --git a/Documentation/devicetree/bindings/input/cap1106.txt b/Documentation/devicetree/bindings/input/cap1106.txt new file mode 100644 index 0000000000000000000000000000000000000000..4b463904cba0bf6a4a27705da778ad9d72f5fa01 --- /dev/null +++ b/Documentation/devicetree/bindings/input/cap1106.txt @@ -0,0 +1,53 @@ +Device tree bindings for Microchip CAP1106, 6 channel capacitive touch sensor + +The node for this driver must be a child of a I2C controller node, as the +device communication via I2C only. + +Required properties: + + compatible: Must be "microchip,cap1106" + + reg: The I2C slave address of the device. + Only 0x28 is valid. + + interrupts: Property describing the interrupt line the + device's ALERT#/CM_IRQ# pin is connected to. + The device only has one interrupt source. + +Optional properties: + + autorepeat: Enables the Linux input system's autorepeat + feature on the input device. + + microchip,sensor-gain: Defines the gain of the sensor circuitry. This + effectively controls the sensitivity, as a + smaller delta capacitance is required to + generate the same delta count values. + Valid values are 1, 2, 4, and 8. + By default, a gain of 1 is set. + + linux,keycodes: Specifies an array of numeric keycode values to + be used for the channels. If this property is + omitted, KEY_A, KEY_B, etc are used as + defaults. The array must have exactly six + entries. + +Example: + +i2c_controller { + cap1106@28 { + compatible = "microchip,cap1106"; + interrupt-parent = <&gpio1>; + interrupts = <0 0>; + reg = <0x28>; + autorepeat; + microchip,sensor-gain = <2>; + + linux,keycodes = <103 /* KEY_UP */ + 106 /* KEY_RIGHT */ + 108 /* KEY_DOWN */ + 105 /* KEY_LEFT */ + 109 /* KEY_PAGEDOWN */ + 104>; /* KEY_PAGEUP */ + }; +} diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt new file mode 100644 index 0000000000000000000000000000000000000000..6e551090f4653ed6a3438be90d18b4afba310f47 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt @@ -0,0 +1,26 @@ +* Pixcir I2C touchscreen controllers + +Required properties: +- compatible: must be "pixcir,pixcir_ts" or "pixcir,pixcir_tangoc" +- reg: I2C address of the chip +- interrupts: interrupt to which the chip is connected +- attb-gpio: GPIO connected to the ATTB line of the chip +- touchscreen-size-x: horizontal resolution of touchscreen (in pixels) +- touchscreen-size-y: vertical resolution of touchscreen (in pixels) + +Example: + + i2c@00000000 { + /* ... */ + + pixcir_ts@5c { + compatible = "pixcir,pixcir_ts"; + reg = <0x5c>; + interrupts = <2 0>; + attb-gpio = <&gpf 2 0 2>; + touchscreen-size-x = <800>; + touchscreen-size-y = <600>; + }; + + /* ... */ + }; diff --git a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt index 2faf1f1fa39e343c086c991abf84747a4eeb315f..80c37df940a7ecc78d1543be0ff5f6f9092f9477 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/zforce_ts.txt @@ -9,6 +9,9 @@ Required properties: - x-size: horizontal resolution of touchscreen - y-size: vertical resolution of touchscreen +Optional properties: +- vdd-supply: Regulator controlling the controller supply + Example: i2c@00000000 { @@ -18,6 +21,7 @@ Example: compatible = "neonode,zforce"; reg = <0x50>; interrupts = <2 0>; + vdd-supply = <®_zforce_vdd>; gpios = <&gpio5 6 0>, /* INT */ <&gpio5 9 0>; /* RST */ diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt similarity index 100% rename from Documentation/devicetree/bindings/arm/atmel-aic.txt rename to Documentation/devicetree/bindings/interrupt-controller/atmel,aic.txt diff --git a/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt new file mode 100644 index 0000000000000000000000000000000000000000..55c04faa3f3febbfe447e7c6de29104f75acaa1a --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/opencores,or1k-pic.txt @@ -0,0 +1,23 @@ +OpenRISC 1000 Programmable Interrupt Controller + +Required properties: + +- compatible : should be "opencores,or1k-pic-level" for variants with + level triggered interrupt lines, "opencores,or1k-pic-edge" for variants with + edge triggered interrupt lines or "opencores,or1200-pic" for machines + with the non-spec compliant or1200 type implementation. + + "opencores,or1k-pic" is also provided as an alias to "opencores,or1200-pic", + but this is only for backwards compatibility. + +- interrupt-controller : Identifies the node as an interrupt controller +- #interrupt-cells : Specifies the number of cells needed to encode an + interrupt source. The value shall be 1. + +Example: + +intc: interrupt-controller { + compatible = "opencores,or1k-pic-level"; + interrupt-controller; + #interrupt-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/iommu/arm,smmu.txt b/Documentation/devicetree/bindings/iommu/arm,smmu.txt index f284b99402bc3d5d704b6f42debac89465ba36f3..2d0f7cd867eaede3cad0a0d163e131b46716be2b 100644 --- a/Documentation/devicetree/bindings/iommu/arm,smmu.txt +++ b/Documentation/devicetree/bindings/iommu/arm,smmu.txt @@ -42,12 +42,6 @@ conditions. ** System MMU optional properties: -- smmu-parent : When multiple SMMUs are chained together, this - property can be used to provide a phandle to the - parent SMMU (that is the next SMMU on the path going - from the mmu-masters towards memory) node for this - SMMU. - - calxeda,smmu-secure-config-access : Enable proper handling of buggy implementations that always use secure access to SMMU configuration registers. In this case non-secure diff --git a/Documentation/devicetree/bindings/iommu/iommu.txt b/Documentation/devicetree/bindings/iommu/iommu.txt new file mode 100644 index 0000000000000000000000000000000000000000..5a8b4624defcb981fc630b2b88ba88957efe6868 --- /dev/null +++ b/Documentation/devicetree/bindings/iommu/iommu.txt @@ -0,0 +1,182 @@ +This document describes the generic device tree binding for IOMMUs and their +master(s). + + +IOMMU device node: +================== + +An IOMMU can provide the following services: + +* Remap address space to allow devices to access physical memory ranges that + they otherwise wouldn't be capable of accessing. + + Example: 32-bit DMA to 64-bit physical addresses + +* Implement scatter-gather at page level granularity so that the device does + not have to. + +* Provide system protection against "rogue" DMA by forcing all accesses to go + through the IOMMU and faulting when encountering accesses to unmapped + address regions. + +* Provide address space isolation between multiple contexts. + + Example: Virtualization + +Device nodes compatible with this binding represent hardware with some of the +above capabilities. + +IOMMUs can be single-master or multiple-master. Single-master IOMMU devices +typically have a fixed association to the master device, whereas multiple- +master IOMMU devices can translate accesses from more than one master. + +The device tree node of the IOMMU device's parent bus must contain a valid +"dma-ranges" property that describes how the physical address space of the +IOMMU maps to memory. An empty "dma-ranges" property means that there is a +1:1 mapping from IOMMU to memory. + +Required properties: +-------------------- +- #iommu-cells: The number of cells in an IOMMU specifier needed to encode an + address. + +The meaning of the IOMMU specifier is defined by the device tree binding of +the specific IOMMU. Below are a few examples of typical use-cases: + +- #iommu-cells = <0>: Single master IOMMU devices are not configurable and + therefore no additional information needs to be encoded in the specifier. + This may also apply to multiple master IOMMU devices that do not allow the + association of masters to be configured. Note that an IOMMU can by design + be multi-master yet only expose a single master in a given configuration. + In such cases the number of cells will usually be 1 as in the next case. +- #iommu-cells = <1>: Multiple master IOMMU devices may need to be configured + in order to enable translation for a given master. In such cases the single + address cell corresponds to the master device's ID. In some cases more than + one cell can be required to represent a single master ID. +- #iommu-cells = <4>: Some IOMMU devices allow the DMA window for masters to + be configured. The first cell of the address in this may contain the master + device's ID for example, while the second cell could contain the start of + the DMA window for the given device. The length of the DMA window is given + by the third and fourth cells. + +Note that these are merely examples and real-world use-cases may use different +definitions to represent their individual needs. Always refer to the specific +IOMMU binding for the exact meaning of the cells that make up the specifier. + + +IOMMU master node: +================== + +Devices that access memory through an IOMMU are called masters. A device can +have multiple master interfaces (to one or more IOMMU devices). + +Required properties: +-------------------- +- iommus: A list of phandle and IOMMU specifier pairs that describe the IOMMU + master interfaces of the device. One entry in the list describes one master + interface of the device. + +When an "iommus" property is specified in a device tree node, the IOMMU will +be used for address translation. If a "dma-ranges" property exists in the +device's parent node it will be ignored. An exception to this rule is if the +referenced IOMMU is disabled, in which case the "dma-ranges" property of the +parent shall take effect. Note that merely disabling a device tree node does +not guarantee that the IOMMU is really disabled since the hardware may not +have a means to turn off translation. But it is invalid in such cases to +disable the IOMMU's device tree node in the first place because it would +prevent any driver from properly setting up the translations. + + +Notes: +====== + +One possible extension to the above is to use an "iommus" property along with +a "dma-ranges" property in a bus device node (such as PCI host bridges). This +can be useful to describe how children on the bus relate to the IOMMU if they +are not explicitly listed in the device tree (e.g. PCI devices). However, the +requirements of that use-case haven't been fully determined yet. Implementing +this is therefore not recommended without further discussion and extension of +this binding. + + +Examples: +========= + +Single-master IOMMU: +-------------------- + + iommu { + #iommu-cells = <0>; + }; + + master { + iommus = <&{/iommu}>; + }; + +Multiple-master IOMMU with fixed associations: +---------------------------------------------- + + /* multiple-master IOMMU */ + iommu { + /* + * Masters are statically associated with this IOMMU and share + * the same address translations because the IOMMU does not + * have sufficient information to distinguish between masters. + * + * Consequently address translation is always on or off for + * all masters at any given point in time. + */ + #iommu-cells = <0>; + }; + + /* static association with IOMMU */ + master@1 { + reg = <1>; + iommus = <&{/iommu}>; + }; + + /* static association with IOMMU */ + master@2 { + reg = <2>; + iommus = <&{/iommu}>; + }; + +Multiple-master IOMMU: +---------------------- + + iommu { + /* the specifier represents the ID of the master */ + #iommu-cells = <1>; + }; + + master@1 { + /* device has master ID 42 in the IOMMU */ + iommus = <&{/iommu} 42>; + }; + + master@2 { + /* device has master IDs 23 and 24 in the IOMMU */ + iommus = <&{/iommu} 23>, <&{/iommu} 24>; + }; + +Multiple-master IOMMU with configurable DMA window: +--------------------------------------------------- + + / { + iommu { + /* + * One cell for the master ID and one cell for the + * address of the DMA window. The length of the DMA + * window is encoded in two cells. + * + * The DMA window is the range addressable by the + * master (i.e. the I/O virtual address space). + */ + #iommu-cells = <4>; + }; + + master { + /* master ID 42, 4 GiB DMA window starting at 0 */ + iommus = <&{/iommu} 42 0 0x1 0x0>; + }; + }; diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt index aece3eac1b634829c20afdeddbe1c8db74bb7b08..dafbe9931c2baa992adab30bcb5c9a50373709bd 100644 --- a/Documentation/devicetree/bindings/leds/pca963x.txt +++ b/Documentation/devicetree/bindings/leds/pca963x.txt @@ -1,18 +1,19 @@ LEDs connected to pca9632, pca9633 or pca9634 Required properties: -- compatible : should be : "nxp,pca9632", "nxp,pca9633" or "nxp,pca9634" +- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635" Optional properties: -- nxp,totem-pole : use totem pole (push-pull) instead of default open-drain +- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults + to open-drain, newer chips to totem pole) - nxp,hw-blink : use hardware blinking instead of software blinking Each led is represented as a sub-node of the nxp,pca963x device. LED sub-node properties: - label : (optional) see Documentation/devicetree/bindings/leds/common.txt -- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633 - or 0 to 7 in pca9634) +- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633, + 0 to 7 in pca9634, or 0 to 15 in pca9635) - linux,default-trigger : (optional) see Documentation/devicetree/bindings/leds/common.txt diff --git a/Documentation/devicetree/bindings/leds/tca6507.txt b/Documentation/devicetree/bindings/leds/tca6507.txt index d7221b84987cd684169bee2765a050cba3511c75..bad9102796f3299fb0e96100bca982cc76b79831 100644 --- a/Documentation/devicetree/bindings/leds/tca6507.txt +++ b/Documentation/devicetree/bindings/leds/tca6507.txt @@ -8,7 +8,7 @@ Required properties: Optional properties: - gpio-controller: allows lines to be used as output-only GPIOs. -- #gpio-cells: if present, must be 0. +- #gpio-cells: if present, must not be 0. Each led is represented as a sub-node of the ti,tca6507 device. diff --git a/Documentation/devicetree/bindings/media/atmel-isi.txt b/Documentation/devicetree/bindings/media/atmel-isi.txt new file mode 100644 index 0000000000000000000000000000000000000000..17e71b7b44c62ab091efbc978428be18b9ebb50c --- /dev/null +++ b/Documentation/devicetree/bindings/media/atmel-isi.txt @@ -0,0 +1,51 @@ +Atmel Image Sensor Interface (ISI) SoC Camera Subsystem +---------------------------------------------- + +Required properties: +- compatible: must be "atmel,at91sam9g45-isi" +- reg: physical base address and length of the registers set for the device; +- interrupts: should contain IRQ line for the ISI; +- clocks: list of clock specifiers, corresponding to entries in + the clock-names property; +- clock-names: must contain "isi_clk", which is the isi peripherial clock. + +ISI supports a single port node with parallel bus. It should contain one +'port' child node with child 'endpoint' node. Please refer to the bindings +defined in Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + isi: isi@f0034000 { + compatible = "atmel,at91sam9g45-isi"; + reg = <0xf0034000 0x4000>; + interrupts = <37 IRQ_TYPE_LEVEL_HIGH 5>; + + clocks = <&isi_clk>; + clock-names = "isi_clk"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_isi>; + + port { + #address-cells = <1>; + #size-cells = <0>; + + isi_0: endpoint { + remote-endpoint = <&ov2640_0>; + bus-width = <8>; + }; + }; + }; + + i2c1: i2c@f0018000 { + ov2640: camera@0x30 { + compatible = "omnivision,ov2640"; + reg = <0x30>; + + port { + ov2640_0: endpoint { + remote-endpoint = <&isi_0>; + bus-width = <8>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt index 937b755baf8fd8eff5f817feb3e9c2d0386c1209..bf52ed4a5067de5c9d825f77865321112ec5a651 100644 --- a/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt +++ b/Documentation/devicetree/bindings/media/exynos-jpeg-codec.txt @@ -3,9 +3,13 @@ Samsung S5P/EXYNOS SoC series JPEG codec Required properties: - compatible : should be one of: - "samsung,s5pv210-jpeg", "samsung,exynos4210-jpeg"; + "samsung,s5pv210-jpeg", "samsung,exynos4210-jpeg", + "samsung,exynos3250-jpeg"; - reg : address and length of the JPEG codec IP register set; - interrupts : specifies the JPEG codec IP interrupt; -- clocks : should contain the JPEG codec IP gate clock specifier, from the - common clock bindings; -- clock-names : should contain "jpeg" entry. +- clock-names : should contain: + - "jpeg" for the core gate clock, + - "sclk" for the special clock (optional). +- clocks : should contain the clock specifier and clock ID list + matching entries in the clock-names property; from + the common clock bindings. diff --git a/Documentation/devicetree/bindings/media/i2c/mt9m111.txt b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt new file mode 100644 index 0000000000000000000000000000000000000000..ed5a334b1e5752864daccf5593cf3055b153d36e --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/mt9m111.txt @@ -0,0 +1,28 @@ +Micron 1.3Mp CMOS Digital Image Sensor + +The Micron MT9M111 is a CMOS active pixel digital image sensor with an active +array size of 1280H x 1024V. It is programmable through a simple two-wire serial +interface. + +Required Properties: +- compatible: value should be "micron,mt9m111" + +For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example: + + i2c_master { + mt9m111@5d { + compatible = "micron,mt9m111"; + reg = <0x5d>; + + remote = <&pxa_camera>; + port { + mt9m111_1: endpoint { + bus-width = <8>; + remote-endpoint = <&pxa_camera>; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/pxa-camera.txt b/Documentation/devicetree/bindings/media/pxa-camera.txt new file mode 100644 index 0000000000000000000000000000000000000000..11f5b5d51af8c8c9c1bbb494e3a44b857f619bac --- /dev/null +++ b/Documentation/devicetree/bindings/media/pxa-camera.txt @@ -0,0 +1,43 @@ +Marvell PXA camera host interface + +Required properties: + - compatible: Should be "marvell,pxa270-qci" + - reg: register base and size + - interrupts: the interrupt number + - any required generic properties defined in video-interfaces.txt + +Optional properties: + - clocks: input clock (see clock-bindings.txt) + - clock-output-names: should contain the name of the clock driving the + sensor master clock MCLK + - clock-frequency: host interface is driving MCLK, and MCLK rate is this rate + +Example: + + pxa_camera: pxa_camera@50000000 { + compatible = "marvell,pxa270-qci"; + reg = <0x50000000 0x1000>; + interrupts = <33>; + + clocks = <&pxa2xx_clks 24>; + clock-names = "ciclk"; + clock-frequency = <50000000>; + clock-output-names = "qci_mclk"; + + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + /* Parallel bus endpoint */ + qci: endpoint@0 { + reg = <0>; /* Local endpoint # */ + remote-endpoint = <&mt9m111_1>; + bus-width = <8>; /* Used data lines */ + hsync-active = <0>; /* Active low */ + vsync-active = <0>; /* Active low */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt new file mode 100644 index 0000000000000000000000000000000000000000..ba61782c2af94d01c82d3c7e6fb0c8f3083c0084 --- /dev/null +++ b/Documentation/devicetree/bindings/media/rcar_vin.txt @@ -0,0 +1,86 @@ +Renesas RCar Video Input driver (rcar_vin) +------------------------------------------ + +The rcar_vin device provides video input capabilities for the Renesas R-Car +family of devices. The current blocks are always slaves and suppot one input +channel which can be either RGB, YUYV or BT656. + + - compatible: Must be one of the following + - "renesas,vin-r8a7791" for the R8A7791 device + - "renesas,vin-r8a7790" for the R8A7790 device + - "renesas,vin-r8a7779" for the R8A7779 device + - "renesas,vin-r8a7778" for the R8A7778 device + - reg: the register base and size for the device registers + - interrupts: the interrupt for the device + - clocks: Reference to the parent clock + +Additionally, an alias named vinX will need to be created to specify +which video input device this is. + +The per-board settings: + - port sub-node describing a single endpoint connected to the vin + as described in video-interfaces.txt[1]. Only the first one will + be considered as each vin interface has one input port. + + These settings are used to work out video input format and widths + into the system. + + +Device node example +------------------- + + aliases { + vin0 = &vin0; + }; + + vin0: vin@0xe6ef0000 { + compatible = "renesas,vin-r8a7790"; + clocks = <&mstp8_clks R8A7790_CLK_VIN0>; + reg = <0 0xe6ef0000 0 0x1000>; + interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + +Board setup example (vin1 composite video input) +------------------------------------------------ + +&i2c2 { + status = "ok"; + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + adv7180@20 { + compatible = "adi,adv7180"; + reg = <0x20>; + remote = <&vin1>; + + port { + adv7180: endpoint { + bus-width = <8>; + remote-endpoint = <&vin1ep0>; + }; + }; + }; +}; + +/* composite video input */ +&vin1 { + pinctrl-0 = <&vin1_pins>; + pinctrl-names = "default"; + + status = "ok"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin1ep0: endpoint { + remote-endpoint = <&adv7180>; + bus-width = <8>; + }; + }; +}; + + + +[1] video-interfaces.txt common video media interface diff --git a/Documentation/devicetree/bindings/media/sunxi-ir.txt b/Documentation/devicetree/bindings/media/sunxi-ir.txt new file mode 100644 index 0000000000000000000000000000000000000000..23dd5ad07b7cff97f71331de27ac7d21331cee0e --- /dev/null +++ b/Documentation/devicetree/bindings/media/sunxi-ir.txt @@ -0,0 +1,23 @@ +Device-Tree bindings for SUNXI IR controller found in sunXi SoC family + +Required properties: +- compatible : should be "allwinner,sun4i-a10-ir"; +- clocks : list of clock specifiers, corresponding to + entries in clock-names property; +- clock-names : should contain "apb" and "ir" entries; +- interrupts : should contain IR IRQ number; +- reg : should contain IO map address for IR. + +Optional properties: +- linux,rc-map-name : Remote control map name. + +Example: + +ir0: ir@01c21800 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 6>, <&ir0_clk>; + clock-names = "apb", "ir"; + interrupts = <0 5 1>; + reg = <0x01C21800 0x40>; + linux,rc-map-name = "rc-rc6-mce"; +}; diff --git a/Documentation/devicetree/bindings/mfd/arizona.txt b/Documentation/devicetree/bindings/mfd/arizona.txt index 36a0c3d8c726a42a976867bb6a2e3a6df62e0d08..5c7e7230984a5c064da0ef8613ded1caf78f2bb9 100644 --- a/Documentation/devicetree/bindings/mfd/arizona.txt +++ b/Documentation/devicetree/bindings/mfd/arizona.txt @@ -42,6 +42,16 @@ Optional properties: the chip default will be used. If present exactly five values must be specified. + - DCVDD-supply, MICVDD-supply : Power supplies, only need to be specified if + they are being externally supplied. As covered in + Documentation/devicetree/bindings/regulator/regulator.txt + +Optional subnodes: + - ldo1 : Initial data for the LDO1 regulator, as covered in + Documentation/devicetree/bindings/regulator/regulator.txt + - micvdd : Initial data for the MICVDD regulator, as covered in + Documentation/devicetree/bindings/regulator/regulator.txt + Example: codec: wm5102@1a { diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt index 8edcb9bd873b016315fa1f7b2471e060ccfe82f7..4f64b2a73169646fae8bafb57dad29dc791a6167 100644 --- a/Documentation/devicetree/bindings/mfd/as3722.txt +++ b/Documentation/devicetree/bindings/mfd/as3722.txt @@ -13,6 +13,14 @@ Required properties: The second cell is the flags, encoded as the trigger masks from binding document interrupts.txt, using dt-bindings/irq. +Optional properties: +-------------------- +- ams,enable-internal-int-pullup: Boolean property, to enable internal pullup on + interrupt pin. Missing this will disable internal pullup on INT pin. +- ams,enable-internal-i2c-pullup: Boolean property, to enable internal pullup on + i2c scl/sda pins. Missing this will disable internal pullup on i2c + scl/sda lines. + Optional submodule and their properties: ======================================= diff --git a/Documentation/devicetree/bindings/mfd/palmas.txt b/Documentation/devicetree/bindings/mfd/palmas.txt index e5f0f830346167e1a91f3430ecdbb0ca92ab1444..eda898978d3332514890f55ed9bca5c3f3e4da41 100644 --- a/Documentation/devicetree/bindings/mfd/palmas.txt +++ b/Documentation/devicetree/bindings/mfd/palmas.txt @@ -6,6 +6,7 @@ twl6037 (palmas) tps65913 (palmas) tps65914 (palmas) tps659038 +tps65917 Required properties: - compatible : Should be from the list @@ -16,6 +17,7 @@ Required properties: ti,tps65914 ti,tps80036 ti,tps659038 + ti,tps65917 and also the generic series names ti,palmas - interrupt-controller : palmas has its own internal IRQs diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Documentation/devicetree/bindings/mfd/s2mps11.txt index d81ba30c0d8bd628bad8f11e3471f0b9146386b3..ba2d7f0f9c5f77f81eb1692108018cbac3ad9299 100644 --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt @@ -1,5 +1,5 @@ -* Samsung S2MPS11 and S2MPS14 Voltage and Current Regulator +* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator The Samsung S2MPS11 is a multi-function device which includes voltage and current regulators, RTC, charger controller and other sub-blocks. It is @@ -7,7 +7,8 @@ interfaced to the host controller using an I2C interface. Each sub-block is addressed by the host system using different I2C slave addresses. Required properties: -- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic". +- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic" + or "samsung,s2mpu02-pmic". - reg: Specifies the I2C slave address of the pmic block. It should be 0x66. Optional properties: @@ -81,11 +82,13 @@ as per the datasheet of s2mps11. - valid values for n are: - S2MPS11: 1 to 38 - S2MPS14: 1 to 25 - - Example: LDO1, LD02, LDO28 + - S2MPU02: 1 to 28 + - Example: LDO1, LDO2, LDO28 - BUCKn - valid values for n are: - S2MPS11: 1 to 10 - S2MPS14: 1 to 5 + - S2MPU02: 1 to 7 - Example: BUCK1, BUCK2, BUCK9 Example: @@ -96,7 +99,7 @@ Example: s2m_osc: clocks { compatible = "samsung,s2mps11-clk"; - #clock-cells = 1; + #clock-cells = <1>; clock-output-names = "xx", "yy", "zz"; }; diff --git a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt index 1f5a31fef9078f58d1613bc0bda3082ffde73af8..03c5a551da55589632c73f10edbfccb8b83621cb 100644 --- a/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt +++ b/Documentation/devicetree/bindings/mfd/sun6i-prcm.txt @@ -4,7 +4,7 @@ PRCM is an MFD device exposing several Power Management related devices (like clks and reset controllers). Required properties: - - compatible: "allwinner,sun6i-a31-prcm" + - compatible: "allwinner,sun6i-a31-prcm" or "allwinner,sun8i-a23-prcm" - reg: The PRCM registers range The prcm node may contain several subdevices definitions: diff --git a/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt new file mode 100644 index 0000000000000000000000000000000000000000..b97b8bef1fe5487fa0aaa807aeed02fde9b56607 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/nvidia,tegra20-apbmisc.txt @@ -0,0 +1,13 @@ +NVIDIA Tegra20/Tegra30/Tegr114/Tegra124 apbmisc block + +Required properties: +- compatible : should be: + "nvidia,tegra20-apbmisc" + "nvidia,tegra30-apbmisc" + "nvidia,tegra114-apbmisc" + "nvidia,tegra124-apbmisc" +- reg: Should contain 2 entries: the first entry gives the physical address + and length of the registers which contain revision and debug features. + The second entry gives the physical address and length of the + registers indicating the strapping options. + diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index 532b1d440abc15d1f1d1e61791b274a6ec8dafe0..6cd3525d0e09514acedaf89c1c1abeeffad7cf95 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -46,13 +46,14 @@ Required Properties: - if CIU clock divider value is 0 (that is divide by 1), both tx and rx phase shift clocks should be 0. -Required properties for a slot: +Required properties for a slot (Deprecated - Recommend to use one slot per host): * gpios: specifies a list of gpios used for command, clock and data bus. The first gpio is the command line and the second gpio is the clock line. The rest of the gpios (depending on the bus-width property) are the data lines in no particular order. The format of the gpio specifier depends on the gpio controller. +(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt) Example: @@ -69,21 +70,13 @@ Example: dwmmc0@12200000 { num-slots = <1>; - supports-highspeed; + cap-mmc-highspeed; + cap-sd-highspeed; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; samsung,dw-mshc-ddr-timing = <1 2>; - - slot@0 { - reg = <0>; - bus-width = <8>; - gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, - <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, - <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, - <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, - <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; - }; + bus-width = <8>; }; diff --git a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt index e5bc49f764d10a982efe9a8a92f9327b19f8e575..3b3544931437accded12ada0ec38c786441d1a02 100644 --- a/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/k3-dw-mshc.txt @@ -34,13 +34,11 @@ Example: num-slots = <1>; vmmc-supply = <&ldo12>; fifo-depth = <0x100>; - supports-highspeed; pinctrl-names = "default"; pinctrl-0 = <&sd_pmx_pins &sd_cfg_func1 &sd_cfg_func2>; - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; - cd-gpios = <&gpio10 3 0>; - }; + bus-width = <4>; + disable-wp; + cd-gpios = <&gpio10 3 0>; + cap-mmc-highspeed; + cap-sd-highspeed; }; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 3c18001dfd5d75fe91038926fd6da8f98637fe88..431716e37a3964638245b2905badff16128b9495 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -34,8 +34,8 @@ Optional properties: - cap-power-off-card: powering off the card is safe - cap-sdio-irq: enable SDIO IRQ signalling on this interface - full-pwr-cycle: full power cycle of the card is supported -- mmc-highspeed-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported -- mmc-highspeed-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported +- mmc-ddr-1_8v: eMMC high-speed DDR mode(1.8V I/O) is supported +- mmc-ddr-1_2v: eMMC high-speed DDR mode(1.2V I/O) is supported - mmc-hs200-1_8v: eMMC HS200 mode(1.8V I/O) is supported - mmc-hs200-1_2v: eMMC HS200 mode(1.2V I/O) is supported - mmc-hs400-1_8v: eMMC HS400 mode(1.8V I/O) is supported diff --git a/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt new file mode 100644 index 0000000000000000000000000000000000000000..299081f94abdb119bfe3ab481c8f93152c8af124 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/renesas,mmcif.txt @@ -0,0 +1,32 @@ +* Renesas Multi Media Card Interface (MMCIF) Controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the MMCIF device. + + +Required properties: + +- compatible: must contain one of the following + - "renesas,mmcif-r8a7740" for the MMCIF found in r8a7740 SoCs + - "renesas,mmcif-r8a7790" for the MMCIF found in r8a7790 SoCs + - "renesas,mmcif-r8a7791" for the MMCIF found in r8a7791 SoCs + - "renesas,sh-mmcif" for the generic MMCIF + +- clocks: reference to the functional clock + +- dmas: reference to the DMA channels, one per channel name listed in the + dma-names property. +- dma-names: must contain "tx" for the transmit DMA channel and "rx" for the + receive DMA channel. + + +Example: R8A7790 (R-Car H2) MMCIF0 + + mmcif0: mmc@ee200000 { + compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; + reg = <0 0xee200000 0 0x80>; + interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; + dmas = <&dmac0 0xd1>, <&dmac0 0xd2>; + dma-names = "tx", "rx"; + }; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt index 81b33b5b20fc07fa1ffeaf3e61e48dfb8263f555..485483a63d8ce3f44a82d30d56c283c8f1034dff 100644 --- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -27,8 +27,8 @@ Example: bus-width = <8>; non-removable; - vmmc = <&pm8941_l20>; - vqmmc = <&pm8941_s3>; + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; pinctrl-names = "default"; pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>; @@ -44,8 +44,8 @@ Example: bus-width = <4>; cd-gpios = <&msmgpio 62 0x1>; - vmmc = <&pm8941_l21>; - vqmmc = <&pm8941_l13>; + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; pinctrl-names = "default"; pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt new file mode 100644 index 0000000000000000000000000000000000000000..7527db447a35b1ed92c79611852f1f365b8900e3 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt @@ -0,0 +1,33 @@ +* STMicroelectronics sdhci-st MMC/SD controller + +This file documents the differences between the core properties in +Documentation/devicetree/bindings/mmc/mmc.txt and the properties +used by the sdhci-st driver. + +Required properties: +- compatible : Must be "st,sdhci" +- clock-names : Should be "mmc" + See: Documentation/devicetree/bindings/resource-names.txt +- clocks : Phandle of the clock used by the sdhci controler + See: Documentation/devicetree/bindings/clock/clock-bindings.txt + +Optional properties: +- non-removable: non-removable slot + See: Documentation/devicetree/bindings/mmc/mmc.txt +- bus-width: Number of data lines + See: Documentation/devicetree/bindings/mmc/mmc.txt + +Example: + +mmc0: sdhci@fe81e000 { + compatible = "st,sdhci"; + status = "disabled"; + reg = <0xfe81e000 0x1000>; + interrupts = ; + interrupt-names = "mmcirq"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_mmc0>; + clock-names = "mmc"; + clocks = <&clk_s_a1_ls 1>; + bus-width = <8> +}; diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt index 2d4a7258a10db9d2c30dc808bb7b5ad5e74fa994..346c6095a6155138ad01f2d39374a8ed97224d12 100644 --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt @@ -67,7 +67,8 @@ Optional properties: * card-detect-delay: Delay in milli-seconds before detecting card after card insert event. The default value is 0. -* supports-highspeed: Enables support for high speed cards (up to 50MHz) +* supports-highspeed (DEPRECATED): Enables support for high speed cards (up to 50MHz) + (use "cap-mmc-highspeed" or "cap-sd-highspeed" instead) * broken-cd: as documented in mmc core bindings. @@ -98,14 +99,11 @@ board specific portions as listed below. clock-frequency = <400000000>; clock-freq-min-max = <400000 200000000>; num-slots = <1>; - supports-highspeed; broken-cd; fifo-depth = <0x80>; card-detect-delay = <200>; vmmc-supply = <&buck8>; - - slot@0 { - reg = <0>; - bus-width = <8>; - }; + bus-width = <8>; + cap-mmc-highspeed; + cap-sd-highspeed; }; diff --git a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt index ce8056116fb0bd9c281ec4a2d60844e9eb551953..76bf087bc8898fc82f9b7d48c94cce498a85be50 100644 --- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt +++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt @@ -12,6 +12,7 @@ Required properties: Should be "ti,omap3-hsmmc", for OMAP3 controllers Should be "ti,omap3-pre-es3-hsmmc" for OMAP3 controllers pre ES3.0 Should be "ti,omap4-hsmmc", for OMAP4 controllers + Should be "ti,am33xx-hsmmc", for AM335x controllers - ti,hwmods: Must be "mmc", n is controller instance starting 1 Optional properties: @@ -56,3 +57,56 @@ Examples: &edma 25>; dma-names = "tx", "rx"; }; + +[workaround for missing swakeup on am33xx] + +This SOC is missing the swakeup line, it will not detect SDIO irq +while in suspend. + + ------ + | PRCM | + ------ + ^ | + swakeup | | fclk + | v + ------ ------- ----- + | card | -- CIRQ --> | hsmmc | -- IRQ --> | CPU | + ------ ------- ----- + +In suspend the fclk is off and the module is disfunctional. Even register reads +will fail. A small logic in the host will request fclk restore, when an +external event is detected. Once the clock is restored, the host detects the +event normally. Since am33xx doesn't have this line it never wakes from +suspend. + +The workaround is to reconfigure the dat1 line as a GPIO upon suspend. To make +this work, we need to set the named pinctrl states "default" and "idle". +Prepare idle to remux dat1 as a gpio, and default to remux it back as sdio +dat1. The MMC driver will then toggle between idle and default state during +runtime. + +In summary: +1. select matching 'compatible' section, see example below. +2. specify pinctrl states "default" and "idle", "sleep" is optional. +3. specify the gpio irq used for detecting sdio irq in suspend + +If configuration is incomplete, a warning message is emitted "falling back to +polling". Also check the "sdio irq mode" in /sys/kernel/debug/mmc0/regs. Mind +not every application needs SDIO irq, e.g. MMC cards. + + mmc1: mmc@48060100 { + compatible = "ti,am33xx-hsmmc"; + ... + pinctrl-names = "default", "idle", "sleep" + pinctrl-0 = <&mmc1_pins>; + pinctrl-1 = <&mmc1_idle>; + pinctrl-2 = <&mmc1_sleep>; + ... + interrupts-extended = <&intc 64 &gpio2 28 0>; + }; + + mmc1_idle : pinmux_cirq_pin { + pinctrl-single,pins = < + 0x0f8 0x3f /* GPIO2_28 */ + >; + }; diff --git a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt index 6a2a1160a70defdbac92be8850152f1c4448cbde..fa0f327cde01417339f8e3618f075e6ef51db12e 100644 --- a/Documentation/devicetree/bindings/mmc/tmio_mmc.txt +++ b/Documentation/devicetree/bindings/mmc/tmio_mmc.txt @@ -18,6 +18,7 @@ Required properties: "renesas,sdhi-r8a7778" - SDHI IP on R8A7778 SoC "renesas,sdhi-r8a7779" - SDHI IP on R8A7779 SoC "renesas,sdhi-r8a7790" - SDHI IP on R8A7790 SoC + "renesas,sdhi-r8a7791" - SDHI IP on R8A7791 SoC Optional properties: - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt index 458d5963468826647d2469c23f542bde3ffe047c..a011fdf61dbfaeac39ab76bb48db143443243549 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt @@ -25,6 +25,16 @@ Optional properties: discoverable or this property is not enabled, the software may chooses an implementation-defined ECC scheme. + - fsl,no-blockmark-swap: Don't swap the bad block marker from the OOB + area with the byte in the data area but rely on the + flash based BBT for identifying bad blocks. + NOTE: this is only valid in conjunction with + 'nand-on-flash-bbt'. + WARNING: on i.MX28 blockmark swapping cannot be + disabled for the BootROM in the FCB. Thus, + partitions written from Linux with this feature + turned on may not be accessible by the BootROM + code. The device tree may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. diff --git a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt index d01ed63d3ebb70167466fde26eb84bb6241b01c2..42409bfe04c4b9b25ac6743d8f30d00a7403461b 100644 --- a/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt +++ b/Documentation/devicetree/bindings/net/amd-xgbe-phy.txt @@ -8,10 +8,16 @@ Required properties: - SerDes integration registers (1/2) - SerDes integration registers (2/2) +Optional properties: +- amd,speed-set: Speed capabilities of the device + 0 - 1GbE and 10GbE (default) + 1 - 2.5GbE and 10GbE + Example: xgbe_phy@e1240800 { compatible = "amd,xgbe-phy-seattle-v1a", "ethernet-phy-ieee802.3-c45"; reg = <0 0xe1240800 0 0x00400>, <0 0xe1250000 0 0x00060>, <0 0xe1250080 0 0x00004>; + amd,speed-set = <0>; }; diff --git a/Documentation/devicetree/bindings/net/amd-xgbe.txt b/Documentation/devicetree/bindings/net/amd-xgbe.txt index ea0c7908a3b8f81b5d37ffb9c9d54af80594ff10..41354f730beba333d1921d428972459aacbd65cd 100644 --- a/Documentation/devicetree/bindings/net/amd-xgbe.txt +++ b/Documentation/devicetree/bindings/net/amd-xgbe.txt @@ -8,16 +8,21 @@ Required properties: - interrupt-parent: Should be the phandle for the interrupt controller that services interrupts for this device - interrupts: Should contain the amd-xgbe interrupt -- clocks: Should be the DMA clock for the amd-xgbe device (used for - calculating the correct Rx interrupt watchdog timer value on a DMA - channel for coalescing) -- clock-names: Should be the name of the DMA clock, "dma_clk" +- clocks: + - DMA clock for the amd-xgbe device (used for calculating the + correct Rx interrupt watchdog timer value on a DMA channel + for coalescing) + - PTP clock for the amd-xgbe device +- clock-names: Should be the names of the clocks + - "dma_clk" for the DMA clock + - "ptp_clk" for the PTP clock - phy-handle: See ethernet.txt file in the same directory - phy-mode: See ethernet.txt file in the same directory Optional properties: - mac-address: mac address to be assigned to the device. Can be overridden by UEFI. +- dma-coherent: Present if dma operations are coherent Example: xgbe@e0700000 { @@ -26,8 +31,8 @@ Example: <0 0xe0780000 0 0x80000>; interrupt-parent = <&gic>; interrupts = <0 325 4>; - clocks = <&xgbe_clk>; - clock-names = "dma_clk"; + clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>; + clock-names = "dma_clk", "ptp_clk"; phy-handle = <&phy>; phy-mode = "xgmii"; mac-address = [ 02 a1 a2 a3 a4 a5 ]; diff --git a/Documentation/devicetree/bindings/net/apm-xgene-enet.txt b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt new file mode 100644 index 0000000000000000000000000000000000000000..ebcad25efd0a8559ef038dfb1a60f1df3cd22b37 --- /dev/null +++ b/Documentation/devicetree/bindings/net/apm-xgene-enet.txt @@ -0,0 +1,66 @@ +APM X-Gene SoC Ethernet nodes + +Ethernet nodes are defined to describe on-chip ethernet interfaces in +APM X-Gene SoC. + +Required properties: +- compatible: Should be "apm,xgene-enet" +- reg: Address and length of the register set for the device. It contains the + information of registers in the same order as described by reg-names +- reg-names: Should contain the register set names + - "enet_csr": Ethernet control and status register address space + - "ring_csr": Descriptor ring control and status register address space + - "ring_cmd": Descriptor ring command register address space +- interrupts: Ethernet main interrupt +- clocks: Reference to the clock entry. +- local-mac-address: MAC address assigned to this device +- phy-connection-type: Interface type between ethernet device and PHY device +- phy-handle: Reference to a PHY node connected to this device + +- mdio: Device tree subnode with the following required properties: + - compatible: Must be "apm,xgene-mdio". + - #address-cells: Must be <1>. + - #size-cells: Must be <0>. + + For the phy on the mdio bus, there must be a node with the following fields: + - compatible: PHY identifier. Please refer ./phy.txt for the format. + - reg: The ID number for the phy. + +Optional properties: +- status: Should be "ok" or "disabled" for enabled/disabled. Default is "ok". + +Example: + menetclk: menetclk { + compatible = "apm,xgene-device-clock"; + clock-output-names = "menetclk"; + status = "ok"; + }; + + menet: ethernet@17020000 { + compatible = "apm,xgene-enet"; + status = "disabled"; + reg = <0x0 0x17020000 0x0 0xd100>, + <0x0 0X17030000 0x0 0X400>, + <0x0 0X10000000 0x0 0X200>; + reg-names = "enet_csr", "ring_csr", "ring_cmd"; + interrupts = <0x0 0x3c 0x4>; + clocks = <&menetclk 0>; + local-mac-address = [00 01 73 00 00 01]; + phy-connection-type = "rgmii"; + phy-handle = <&menetphy>; + mdio { + compatible = "apm,xgene-mdio"; + #address-cells = <1>; + #size-cells = <0>; + menetphy: menetphy@3 { + compatible = "ethernet-phy-id001c.c915"; + reg = <0x3>; + }; + + }; + }; + +/* Board-specific peripheral configurations */ +&menet { + status = "ok"; +}; diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt index c183ea90d9bc5b08e7980d4e9bdb9dd386957077..aa7ad622259d991fbfdbfafa303285c09527ce6e 100644 --- a/Documentation/devicetree/bindings/net/broadcom-systemport.txt +++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt @@ -4,7 +4,8 @@ Required properties: - compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport" - reg: address and length of the register set for the device. - interrupts: interrupts for the device, first cell must be for the the rx - interrupts, and the second cell should be for the transmit queues + interrupts, and the second cell should be for the transmit queues. An + optional third interrupt cell for Wake-on-LAN can be specified - local-mac-address: Ethernet MAC address (48 bits) of this adapter - phy-mode: Should be a string describing the PHY interface to the Ethernet switch/PHY, see Documentation/devicetree/bindings/net/ethernet.txt diff --git a/Documentation/devicetree/bindings/net/davinci-mdio.txt b/Documentation/devicetree/bindings/net/davinci-mdio.txt index 72efaaf764f728479841b9941ee4e23c0ec52487..0369e25aabd2dd8cbc6be196130d845394b050ac 100644 --- a/Documentation/devicetree/bindings/net/davinci-mdio.txt +++ b/Documentation/devicetree/bindings/net/davinci-mdio.txt @@ -1,8 +1,8 @@ -TI SoC Davinci MDIO Controller Device Tree Bindings +TI SoC Davinci/Keystone2 MDIO Controller Device Tree Bindings --------------------------------------------------- Required properties: -- compatible : Should be "ti,davinci_mdio" +- compatible : Should be "ti,davinci_mdio" or "ti,keystone_mdio" - reg : physical base address and size of the davinci mdio registers map - bus_freq : Mdio Bus frequency @@ -19,7 +19,7 @@ file. Examples: mdio: davinci_mdio@4A101000 { - compatible = "ti,cpsw"; + compatible = "ti,davinci_mdio"; reg = <0x4A101000 0x1000>; bus_freq = <1000000>; }; @@ -27,7 +27,7 @@ Examples: (or) mdio: davinci_mdio@4A101000 { - compatible = "ti,cpsw"; + compatible = "ti,davinci_mdio"; ti,hwmods = "davinci_mdio"; bus_freq = <1000000>; }; diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index 6bc84adb10c0ca6f278cc30d40e0b802c12adfd8..8a2c7b55ec165b69ce1b6084fea32466f68ff483 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -12,7 +12,14 @@ Optional properties: only if property "phy-reset-gpios" is available. Missing the property will have the duration be 1 millisecond. Numbers greater than 1000 are invalid and 1 millisecond will be used instead. -- phy-supply: regulator that powers the Ethernet PHY. +- phy-supply : regulator that powers the Ethernet PHY. +- phy-handle : phandle to the PHY device connected to this device. +- fixed-link : Assume a fixed link. See fixed-link.txt in the same directory. + Use instead of phy-handle. + +Optional subnodes: +- mdio : specifies the mdio bus in the FEC, used as a container for phy nodes + according to phy.txt in the same directory Example: @@ -25,3 +32,23 @@ ethernet@83fec000 { local-mac-address = [00 04 9F 01 1B B9]; phy-supply = <®_fec_supply>; }; + +Example with phy specified: + +ethernet@83fec000 { + compatible = "fsl,imx51-fec", "fsl,imx27-fec"; + reg = <0x83fec000 0x4000>; + interrupts = <87>; + phy-mode = "mii"; + phy-reset-gpios = <&gpio2 14 0>; /* GPIO2_14 */ + local-mac-address = [00 04 9F 01 1B B9]; + phy-supply = <®_fec_supply>; + phy-handle = <ðphy>; + mdio { + ethphy: ethernet-phy@6 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <6>; + max-speed = <100>; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt b/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt new file mode 100644 index 0000000000000000000000000000000000000000..0071883c08d8787f1d9a49d1369a6220527b869f --- /dev/null +++ b/Documentation/devicetree/bindings/net/ieee802154/cc2520.txt @@ -0,0 +1,29 @@ +*CC2520 IEEE 802.15.4 Compatible Radio* + +Required properties: + - compatible: should be "ti,cc2520" + - spi-max-frequency: maximal bus speed (8000000), should be set to 4000000 depends + sync or async operation mode + - reg: the chipselect index + - pinctrl-0: pin control group to be used for this controller. + - pinctrl-names: must contain a "default" entry. + - fifo-gpio: GPIO spec for the FIFO pin + - fifop-gpio: GPIO spec for the FIFOP pin + - sfd-gpio: GPIO spec for the SFD pin + - cca-gpio: GPIO spec for the CCA pin + - vreg-gpio: GPIO spec for the VREG pin + - reset-gpio: GPIO spec for the RESET pin +Example: + cc2520@0 { + compatible = "ti,cc2520"; + reg = <0>; + spi-max-frequency = <4000000>; + pinctrl-names = "default"; + pinctrl-0 = <&cc2520_cape_pins>; + fifo-gpio = <&gpio1 18 0>; + fifop-gpio = <&gpio1 19 0>; + sfd-gpio = <&gpio1 13 0>; + cca-gpio = <&gpio1 16 0>; + vreg-gpio = <&gpio0 31 0>; + reset-gpio = <&gpio1 12 0>; + }; diff --git a/Documentation/devicetree/bindings/net/marvell-pp2.txt b/Documentation/devicetree/bindings/net/marvell-pp2.txt new file mode 100644 index 0000000000000000000000000000000000000000..aa4f4230bfd7e7c350c79011e054696903a13a44 --- /dev/null +++ b/Documentation/devicetree/bindings/net/marvell-pp2.txt @@ -0,0 +1,61 @@ +* Marvell Armada 375 Ethernet Controller (PPv2) + +Required properties: + +- compatible: should be "marvell,armada-375-pp2" +- reg: addresses and length of the register sets for the device. + Must contain the following register sets: + - common controller registers + - LMS registers + In addition, at least one port register set is required. +- clocks: a pointer to the reference clocks for this device, consequently: + - main controller clock + - GOP clock +- clock-names: names of used clocks, must be "pp_clk" and "gop_clk". + +The ethernet ports are represented by subnodes. At least one port is +required. + +Required properties (port): + +- interrupts: interrupt for the port +- port-id: should be '0' or '1' for ethernet ports, and '2' for the + loopback port +- phy-mode: See ethernet.txt file in the same directory + +Optional properties (port): + +- marvell,loopback: port is loopback mode +- phy: a phandle to a phy node defining the PHY address (as the reg + property, a single integer). Note: if this property isn't present, + then fixed link is assumed, and the 'fixed-link' property is + mandatory. + +Example: + +ethernet@f0000 { + compatible = "marvell,armada-375-pp2"; + reg = <0xf0000 0xa000>, + <0xc0000 0x3060>, + <0xc4000 0x100>, + <0xc5000 0x100>; + clocks = <&gateclk 3>, <&gateclk 19>; + clock-names = "pp_clk", "gop_clk"; + status = "okay"; + + eth0: eth0@c4000 { + interrupts = ; + port-id = <0>; + status = "okay"; + phy = <&phy0>; + phy-mode = "gmii"; + }; + + eth1: eth1@c5000 { + interrupts = ; + port-id = <1>; + status = "okay"; + phy = <&phy3>; + phy-mode = "gmii"; + }; +}; diff --git a/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt b/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt new file mode 100644 index 0000000000000000000000000000000000000000..3b58ae4803445da5c1066159dc67577bec9f6cb4 --- /dev/null +++ b/Documentation/devicetree/bindings/net/nfc/st21nfcb.txt @@ -0,0 +1,33 @@ +* STMicroelectronics SAS. ST21NFCB NFC Controller + +Required properties: +- compatible: Should be "st,st21nfcb_i2c". +- clock-frequency: I²C work frequency. +- reg: address on the bus +- interrupt-parent: phandle for the interrupt gpio controller +- interrupts: GPIO interrupt to which the chip is connected +- reset-gpios: Output GPIO pin used to reset the ST21NFCB + +Optional SoC Specific Properties: +- pinctrl-names: Contains only one value - "default". +- pintctrl-0: Specifies the pin control groups used for this controller. + +Example (for ARM-based BeagleBoard xM with ST21NFCB on I2C2): + +&i2c2 { + + status = "okay"; + + st21nfcb: st21nfcb@8 { + + compatible = "st,st21nfcb_i2c"; + + reg = <0x08>; + clock-frequency = <400000>; + + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; + + reset-gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/Documentation/devicetree/bindings/net/sh_eth.txt b/Documentation/devicetree/bindings/net/sh_eth.txt index e7106b50dbdcda2d7ff3919e6a041d946a87623e..34d4db1a4e257a6efcf86aac42813de920214329 100644 --- a/Documentation/devicetree/bindings/net/sh_eth.txt +++ b/Documentation/devicetree/bindings/net/sh_eth.txt @@ -9,6 +9,7 @@ Required properties: "renesas,ether-r8a7779" if the device is a part of R8A7779 SoC. "renesas,ether-r8a7790" if the device is a part of R8A7790 SoC. "renesas,ether-r8a7791" if the device is a part of R8A7791 SoC. + "renesas,ether-r8a7794" if the device is a part of R8A7794 SoC. "renesas,ether-r7s72100" if the device is a part of R7S72100 SoC. - reg: offset and length of (1) the E-DMAC/feLic register block (required), (2) the TSU register block (optional). diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index a2acd2b26baf78c8aafc3948d7dc7cb012c09db5..9b03c57563a49d2145fb47c2a5086ff71506fe3f 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -25,6 +25,10 @@ Required properties: - snps,force_sf_dma_mode Force DMA to use the Store and Forward mode for both tx and rx. This flag is ignored if force_thresh_dma_mode is set. +- snps,multicast-filter-bins: Number of multicast filter hash bins + supported by this device instance +- snps,perfect-filter-entries: Number of perfect filter entries supported + by this device instance Optional properties: - resets: Should contain a phandle to the STMMAC reset signal, if any @@ -47,6 +51,8 @@ Examples: mac-address = [000000000000]; /* Filled in by U-Boot */ max-frame-size = <3800>; phy-mode = "gmii"; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; clocks = <&clock>; clock-names = "stmmaceth">; }; diff --git a/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt new file mode 100644 index 0000000000000000000000000000000000000000..5dbf169cd81c864a20c22f57fccef3a25a12bb58 --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/brcm,bcm43xx-fmac.txt @@ -0,0 +1,41 @@ +Broadcom BCM43xx Fullmac wireless SDIO devices + +This node provides properties for controlling the Broadcom wireless device. The +node is expected to be specified as a child node to the SDIO controller that +connects the device to the system. + +Required properties: + + - compatible : Should be "brcm,bcm4329-fmac". + +Optional properties: + - brcm,drive-strength : drive strength used for SDIO pins on device in mA + (default = 6). + - interrupt-parent : the phandle for the interrupt controller to which the + device interrupts are connected. + - interrupts : specifies attributes for the out-of-band interrupt (host-wake). + When not specified the device will use in-band SDIO interrupts. + - interrupt-names : name of the out-of-band interrupt, which must be set + to "host-wake". + +Example: + +mmc3: mmc@01c12000 { + #address-cells = <1>; + #size-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&mmc3_pins_a>; + vmmc-supply = <®_vmmc3>; + bus-width = <4>; + non-removable; + status = "okay"; + + brcmf: bcrmf@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + interrupt-parent = <&pio>; + interrupts = <10 8>; /* PH10 / EINT10 */ + interrupt-names = "host-wake"; + }; +}; diff --git a/Documentation/devicetree/bindings/panel/auo,b133htn01.txt b/Documentation/devicetree/bindings/panel/auo,b133htn01.txt new file mode 100644 index 0000000000000000000000000000000000000000..302226b5bb557014bb978e4951996a6aee2bc949 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/auo,b133htn01.txt @@ -0,0 +1,7 @@ +AU Optronics Corporation 13.3" FHD (1920x1080) color TFT-LCD panel + +Required properties: +- compatible: should be "auo,b133htn01" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/panel/foxlink,fl500wvr00-a0t.txt b/Documentation/devicetree/bindings/panel/foxlink,fl500wvr00-a0t.txt new file mode 100644 index 0000000000000000000000000000000000000000..b47f9d87bc1956f63c7e8c2afea9213549f68727 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/foxlink,fl500wvr00-a0t.txt @@ -0,0 +1,7 @@ +Foxlink Group 5" WVGA TFT LCD panel + +Required properties: +- compatible: should be "foxlink,fl500wvr00-a0t" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/panel/innolux,n116bge.txt b/Documentation/devicetree/bindings/panel/innolux,n116bge.txt new file mode 100644 index 0000000000000000000000000000000000000000..081bb939ed319be1b8c793b96decc485c3740a99 --- /dev/null +++ b/Documentation/devicetree/bindings/panel/innolux,n116bge.txt @@ -0,0 +1,7 @@ +Innolux Corporation 11.6" WXGA (1366x768) TFT LCD panel + +Required properties: +- compatible: should be "innolux,n116bge" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/panel/innolux,n156bge-l21.txt b/Documentation/devicetree/bindings/panel/innolux,n156bge-l21.txt new file mode 100644 index 0000000000000000000000000000000000000000..7825844aafdff781f764da037681687e73f68d5f --- /dev/null +++ b/Documentation/devicetree/bindings/panel/innolux,n156bge-l21.txt @@ -0,0 +1,7 @@ +InnoLux 15.6" WXGA TFT LCD panel + +Required properties: +- compatible: should be "innolux,n156bge-l21" + +This binding is compatible with the simple-panel binding, which is specified +in simple-panel.txt in this directory. diff --git a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt index c300391e8d3e3eac79b29d1ed231bf7ce7260a94..0823362548dc04c03416a83e001ef19677dbba62 100644 --- a/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt +++ b/Documentation/devicetree/bindings/pci/nvidia,tegra20-pcie.txt @@ -14,9 +14,6 @@ Required properties: - interrupt-names: Must include the following entries: "intr": The Tegra interrupt that is asserted for controller interrupts "msi": The Tegra interrupt that is asserted when an MSI is received -- pex-clk-supply: Supply voltage for internal reference clock -- vdd-supply: Power supply for controller (1.05V) -- avdd-supply: Power supply for controller (1.05V) (not required for Tegra20) - bus-range: Range of bus numbers associated with this controller - #address-cells: Address representation for root ports (must be 3) - cell 0 specifies the bus and device numbers of the root port: @@ -60,6 +57,33 @@ Required properties: - afi - pcie_x +Power supplies for Tegra20: +- avdd-pex-supply: Power supply for analog PCIe logic. Must supply 1.05 V. +- vdd-pex-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. +- avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must + supply 1.05 V. +- avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must + supply 1.05 V. +- vddio-pex-clk-supply: Power supply for PCIe clock. Must supply 3.3 V. + +Power supplies for Tegra30: +- Required: + - avdd-pex-pll-supply: Power supply for dedicated (internal) PCIe PLL. Must + supply 1.05 V. + - avdd-plle-supply: Power supply for PLLE, which is shared with SATA. Must + supply 1.05 V. + - vddio-pex-ctl-supply: Power supply for PCIe control I/O partition. Must + supply 1.8 V. + - hvdd-pex-supply: High-voltage supply for PCIe I/O and PCIe output clocks. + Must supply 3.3 V. +- Optional: + - If lanes 0 to 3 are used: + - avdd-pexa-supply: Power supply for analog PCIe logic. Must supply 1.05 V. + - vdd-pexa-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. + - If lanes 4 or 5 are used: + - avdd-pexb-supply: Power supply for analog PCIe logic. Must supply 1.05 V. + - vdd-pexb-supply: Power supply for digital PCIe I/O. Must supply 1.05 V. + Root ports are defined as subnodes of the PCIe controller node. Required properties: diff --git a/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt new file mode 100644 index 0000000000000000000000000000000000000000..49ea76da77183cf89a15a1cfff13ed4a7ac1b3c5 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/spear13xx-pcie.txt @@ -0,0 +1,14 @@ +SPEAr13XX PCIe DT detail: +================================ + +SPEAr13XX uses synopsis designware PCIe controller and ST MiPHY as phy +controller. + +Required properties: +- compatible : should be "st,spear1340-pcie", "snps,dw-pcie". +- phys : phandle to phy node associated with pcie controller +- phy-names : must be "pcie-phy" +- All other definitions as per generic PCI bindings + + Optional properties: +- st,pcie-is-gen1 indicates that forced gen1 initialization is needed. diff --git a/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt new file mode 100644 index 0000000000000000000000000000000000000000..88f8c23384c0be3b821ddbc08409c95fb695a47b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/berlin-sata-phy.txt @@ -0,0 +1,34 @@ +Berlin SATA PHY +--------------- + +Required properties: +- compatible: should be "marvell,berlin2q-sata-phy" +- address-cells: should be 1 +- size-cells: should be 0 +- phy-cells: from the generic PHY bindings, must be 1 +- reg: address and length of the register +- clocks: reference to the clock entry + +Sub-nodes: +Each PHY should be represented as a sub-node. + +Sub-nodes required properties: +- reg: the PHY number + +Example: + sata_phy: phy@f7e900a0 { + compatible = "marvell,berlin2q-sata-phy"; + reg = <0xf7e900a0 0x200>; + clocks = <&chip CLKID_SATA>; + #address-cells = <1>; + #size-cells = <0>; + #phy-cells = <1>; + + sata-phy@0 { + reg = <0>; + }; + + sata-phy@1 { + reg = <1>; + }; + }; diff --git a/Documentation/devicetree/bindings/phy/hix5hd2-phy.txt b/Documentation/devicetree/bindings/phy/hix5hd2-phy.txt new file mode 100644 index 0000000000000000000000000000000000000000..296168b74d246bd05fbce7702418e46a18e43ea7 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/hix5hd2-phy.txt @@ -0,0 +1,22 @@ +Hisilicon hix5hd2 SATA PHY +----------------------- + +Required properties: +- compatible: should be "hisilicon,hix5hd2-sata-phy" +- reg: offset and length of the PHY registers +- #phy-cells: must be 0 +Refer to phy/phy-bindings.txt for the generic PHY binding properties + +Optional Properties: +- hisilicon,peripheral-syscon: phandle of syscon used to control peripheral. +- hisilicon,power-reg: offset and bit number within peripheral-syscon, + register of controlling sata power supply. + +Example: + sata_phy: phy@f9900000 { + compatible = "hisilicon,hix5hd2-sata-phy"; + reg = <0xf9900000 0x10000>; + #phy-cells = <0>; + hisilicon,peripheral-syscon = <&peripheral_ctrl>; + hisilicon,power-reg = <0x8 10>; + }; diff --git a/Documentation/devicetree/bindings/phy/phy-bindings.txt b/Documentation/devicetree/bindings/phy/phy-bindings.txt index 8ae844fc0c60562f53378183a6700c1c50b22cfd..2aa1840200edd43d42a450b6dad81c8709b2ff87 100644 --- a/Documentation/devicetree/bindings/phy/phy-bindings.txt +++ b/Documentation/devicetree/bindings/phy/phy-bindings.txt @@ -10,6 +10,10 @@ Required Properties: provider can use the values in cells to find the appropriate PHY. +Optional Properties: +phy-supply: Phandle to a regulator that provides power to the PHY. This + regulator will be managed during the PHY power on/off sequence. + For example: phys: phy { diff --git a/Documentation/devicetree/bindings/phy/phy-miphy365x.txt b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt new file mode 100644 index 0000000000000000000000000000000000000000..42c880886cf74e2937156ce8fb3e0b93067e6ecc --- /dev/null +++ b/Documentation/devicetree/bindings/phy/phy-miphy365x.txt @@ -0,0 +1,76 @@ +STMicroelectronics STi MIPHY365x PHY binding +============================================ + +This binding describes a miphy device that is used to control PHY hardware +for SATA and PCIe. + +Required properties (controller (parent) node): +- compatible : Should be "st,miphy365x-phy" +- st,syscfg : Should be a phandle of the system configuration register group + which contain the SATA, PCIe mode setting bits + +Required nodes : A sub-node is required for each channel the controller + provides. Address range information including the usual + 'reg' and 'reg-names' properties are used inside these + nodes to describe the controller's topology. These nodes + are translated by the driver's .xlate() function. + +Required properties (port (child) node): +- #phy-cells : Should be 1 (See second example) + Cell after port phandle is device type from: + - MIPHY_TYPE_SATA + - MIPHY_TYPE_PCI +- reg : Address and length of register sets for each device in + "reg-names" +- reg-names : The names of the register addresses corresponding to the + registers filled in "reg": + - sata: For SATA devices + - pcie: For PCIe devices + - syscfg: To specify the syscfg based config register + +Optional properties (port (child) node): +- st,sata-gen : Generation of locally attached SATA IP. Expected values + are {1,2,3). If not supplied generation 1 hardware will + be expected +- st,pcie-tx-pol-inv : Bool property to invert the polarity PCIe Tx (Txn/Txp) +- st,sata-tx-pol-inv : Bool property to invert the polarity SATA Tx (Txn/Txp) + +Example: + + miphy365x_phy: miphy365x@fe382000 { + compatible = "st,miphy365x-phy"; + st,syscfg = <&syscfg_rear>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + phy_port0: port@fe382000 { + reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>; + reg-names = "sata", "pcie", "syscfg"; + #phy-cells = <1>; + st,sata-gen = <3>; + }; + + phy_port1: port@fe38a000 { + reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;; + reg-names = "sata", "pcie", "syscfg"; + #phy-cells = <1>; + st,pcie-tx-pol-inv; + }; + }; + +Specifying phy control of devices +================================= + +Device nodes should specify the configuration required in their "phys" +property, containing a phandle to the phy port node and a device type. + +Example: + +#include + + sata0: sata@fe380000 { + ... + phys = <&phy_port0 MIPHY_TYPE_SATA>; + ... + }; diff --git a/Documentation/devicetree/bindings/phy/qcom-apq8064-sata-phy.txt b/Documentation/devicetree/bindings/phy/qcom-apq8064-sata-phy.txt new file mode 100644 index 0000000000000000000000000000000000000000..952f6c96bab903deb9df684ef63a059b9900076d --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-apq8064-sata-phy.txt @@ -0,0 +1,24 @@ +Qualcomm APQ8064 SATA PHY Controller +------------------------------------ + +SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers. +Each SATA PHY controller should have its own node. + +Required properties: +- compatible: compatible list, contains "qcom,apq8064-sata-phy". +- reg: offset and length of the SATA PHY register set; +- #phy-cells: must be zero +- clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. +- clock-names: must be "cfg" for phy config clock. + +Example: + sata_phy: sata-phy@1b400000 { + compatible = "qcom,apq8064-sata-phy"; + reg = <0x1b400000 0x200>; + + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt b/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt new file mode 100644 index 0000000000000000000000000000000000000000..76bfbd056202e43ab7238724a058202ab1b173e3 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/qcom-ipq806x-sata-phy.txt @@ -0,0 +1,23 @@ +Qualcomm IPQ806x SATA PHY Controller +------------------------------------ + +SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers. +Each SATA PHY controller should have its own node. + +Required properties: +- compatible: compatible list, contains "qcom,ipq806x-sata-phy" +- reg: offset and length of the SATA PHY register set; +- #phy-cells: must be zero +- clocks: must be exactly one entry +- clock-names: must be "cfg" + +Example: + sata_phy: sata-phy@1b400000 { + compatible = "qcom,ipq806x-sata-phy"; + reg = <0x1b400000 0x200>; + + clocks = <&gcc SATA_PHY_CFG_CLK>; + clock-names = "cfg"; + + #phy-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index 2049261d8c315430d35fdebbb0c066d7d1eeda56..7a6feea2a48b90a36d928cca664ac2cd893e4213 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -26,9 +26,11 @@ Samsung S5P/EXYNOS SoC series USB PHY Required properties: - compatible : should be one of the listed compatibles: + - "samsung,exynos3250-usb2-phy" - "samsung,exynos4210-usb2-phy" - "samsung,exynos4x12-usb2-phy" - "samsung,exynos5250-usb2-phy" + - "samsung,s5pv210-usb2-phy" - reg : a list of registers used by phy driver - first and obligatory is the location of phy modules registers - samsung,sysreg-phandle - handle to syscon used to control the system registers @@ -46,6 +48,7 @@ and Exynos 4212) it is as follows: 1 - USB host ("host"), 2 - HSIC0 ("hsic0"), 3 - HSIC1 ("hsic1"), +Exynos3250 has only USB device phy available as phy 0. Exynos 4210 and Exynos 4212 use mode switching and require that mode switch register is supplied. diff --git a/Documentation/devicetree/bindings/phy/st-spear-miphy.txt b/Documentation/devicetree/bindings/phy/st-spear-miphy.txt new file mode 100644 index 0000000000000000000000000000000000000000..2a6bfdcc09b3e0e8c3acd2753cd43f5dbfe07e68 --- /dev/null +++ b/Documentation/devicetree/bindings/phy/st-spear-miphy.txt @@ -0,0 +1,15 @@ +ST SPEAr miphy DT details +========================= + +ST Microelectronics SPEAr miphy is a phy controller supporting PCIe and SATA. + +Required properties: +- compatible : should be "st,spear1310-miphy" or "st,spear1340-miphy" +- reg : offset and length of the PHY register set. +- misc: phandle for the syscon node to access misc registers +- #phy-cells : from the generic PHY bindings, must be 1. + - cell[1]: 0 if phy used for SATA, 1 for PCIe. + +Optional properties: +- phy-id: Instance id of the phy. Only required when there are multiple phys + present on a implementation. diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt index 9ce458f32945f03e67751f50eb3ab31e2bcfd81d..305e3df3d9b1eb9a994c845eb28959275d2f20ed 100644 --- a/Documentation/devicetree/bindings/phy/ti-phy.txt +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -9,15 +9,17 @@ Required properties: e.g. USB2_PHY on OMAP5. "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control e.g. USB3 PHY and SATA PHY on OMAP5. + "ti,control-phy-pcie" - for pcie to support external clock for pcie and to + set PCS delay value. + e.g. PCIE PHY in DRA7x "ti,control-phy-usb2-dra7" - if it has power down register like USB2 PHY on DRA7 platform. "ti,control-phy-usb2-am437" - if it has power down register like USB2 PHY on AM437 platform. - - reg : Address and length of the register set for the device. It contains - the address of "otghs_control" for control-phy-otghs or "power" register - for other types. - - reg-names: should be "otghs_control" control-phy-otghs and "power" for - other types. + - reg : register ranges as listed in the reg-names property + - reg-names: "otghs_control" for control-phy-otghs + "power", "pcie_pcs" and "control_sma" for control-phy-pcie + "power" for all other types omap_control_usb: omap-control-usb@4a002300 { compatible = "ti,control-phy-otghs"; @@ -56,8 +58,8 @@ usb2phy@4a0ad080 { TI PIPE3 PHY Required properties: - - compatible: Should be "ti,phy-usb3" or "ti,phy-pipe3-sata". - "ti,omap-usb3" is deprecated. + - compatible: Should be "ti,phy-usb3", "ti,phy-pipe3-sata" or + "ti,phy-pipe3-pcie. "ti,omap-usb3" is deprecated. - reg : Address and length of the register set for the device. - reg-names: The names of the register addresses corresponding to the registers filled in "reg". @@ -69,10 +71,17 @@ Required properties: * "wkupclk" - wakeup clock. * "sysclk" - system clock. * "refclk" - reference clock. + * "dpll_ref" - external dpll ref clk + * "dpll_ref_m2" - external dpll ref clk + * "phy-div" - divider for apll + * "div-clk" - apll clock Optional properties: - ctrl-module : phandle of the control module used by PHY driver to power on the PHY. + - id: If there are multiple instance of the same type, in order to + differentiate between each instance "id" can be used (e.g., multi-lane PCIe + PHY). If "id" is not provided, it is set to default value of '1'. This is usually a subnode of ocp2scp to which it is connected. diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt index d8d065608ec0a7de0aae5d5f8f094a9d5ed1cb40..93ce12eb422a6877de66d4a2ab29dd86f003ecb8 100644 --- a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -13,6 +13,8 @@ Required properties: "allwinner,sun6i-a31-pinctrl" "allwinner,sun6i-a31-r-pinctrl" "allwinner,sun7i-a20-pinctrl" + "allwinner,sun8i-a23-pinctrl" + "allwinner,sun8i-a23-r-pinctrl" - reg: Should contain the register physical address and length for the pin controller. diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt new file mode 100644 index 0000000000000000000000000000000000000000..2f9c0bd6645793b41f6f1ae6b7c17be8321cc748 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra124-xusb-padctl.txt @@ -0,0 +1,127 @@ +Device tree binding for NVIDIA Tegra XUSB pad controller +======================================================== + +The Tegra XUSB pad controller manages a set of lanes, each of which can be +assigned to one out of a set of different pads. Some of these pads have an +associated PHY that must be powered up before the pad can be used. + +This document defines the device-specific binding for the XUSB pad controller. + +Refer to pinctrl-bindings.txt in this directory for generic information about +pin controller device tree bindings and ../phy/phy-bindings.txt for details on +how to describe and reference PHYs in device trees. + +Required properties: +-------------------- +- compatible: should be "nvidia,tegra124-xusb-padctl" +- reg: Physical base address and length of the controller's registers. +- resets: Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names: Must include the following entries: + - padctl +- #phy-cells: Should be 1. The specifier is the index of the PHY to reference. + See for the list of valid values. + +Lane muxing: +------------ + +Child nodes contain the pinmux configurations following the conventions from +the pinctrl-bindings.txt document. Typically a single, static configuration is +given and applied at boot time. + +Each subnode describes groups of lanes along with parameters and pads that +they should be assigned to. The name of these subnodes is not important. All +subnodes should be parsed solely based on their content. + +Each subnode only applies the parameters that are explicitly listed. In other +words, if a subnode that lists a function but no pin configuration parameters +implies no information about any pin configuration parameters. Similarly, a +subnode that describes only an IDDQ parameter implies no information about +what function the pins are assigned to. For this reason even seemingly boolean +values are actually tristates in this binding: unspecified, off or on. +Unspecified is represented as an absent property, and off/on are represented +as integer values 0 and 1. + +Required properties: +- nvidia,lanes: An array of strings. Each string is the name of a lane. + +Optional properties: +- nvidia,function: A string that is the name of the function (pad) that the + pin or group should be assigned to. Valid values for function names are + listed below. +- nvidia,iddq: Enables IDDQ mode of the lane. (0: no, 1: yes) + +Note that not all of these properties are valid for all lanes. Lanes can be +divided into three groups: + + - otg-0, otg-1, otg-2: + + Valid functions for this group are: "snps", "xusb", "uart", "rsvd". + + The nvidia,iddq property does not apply to this group. + + - ulpi-0, hsic-0, hsic-1: + + Valid functions for this group are: "snps", "xusb". + + The nvidia,iddq property does not apply to this group. + + - pcie-0, pcie-1, pcie-2, pcie-3, pcie-4, sata-0: + + Valid functions for this group are: "pcie", "usb3", "sata", "rsvd". + + +Example: +======== + +SoC file extract: +----------------- + + padctl@0,7009f000 { + compatible = "nvidia,tegra124-xusb-padctl"; + reg = <0x0 0x7009f000 0x0 0x1000>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + #phy-cells = <1>; + }; + +Board file extract: +------------------- + + pcie-controller@0,01003000 { + ... + + phys = <&padctl 0>; + phy-names = "pcie"; + + ... + }; + + ... + + padctl: padctl@0,7009f000 { + pinctrl-0 = <&padctl_default>; + pinctrl-names = "default"; + + padctl_default: pinmux { + usb3 { + nvidia,lanes = "pcie-0", "pcie-1"; + nvidia,function = "usb3"; + nvidia,iddq = <0>; + }; + + pcie { + nvidia,lanes = "pcie-2", "pcie-3", + "pcie-4"; + nvidia,function = "pcie"; + nvidia,iddq = <0>; + }; + + sata { + nvidia,lanes = "sata-0"; + nvidia,function = "sata"; + nvidia,iddq = <0>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt index 7181f925acaaa8c82a16fb22393d0c70ae193089..0211c6d8a5229e17866eb90f751a015ffaf609a0 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,apq8064-pinctrl.txt @@ -46,7 +46,7 @@ Valid values for pins are: gpio0-gpio89 Valid values for function are: - cam_mclk, codec_mic_i2s, codec_spkr_i2s, gsbi1, gsbi2, gsbi3, gsbi4, + cam_mclk, codec_mic_i2s, codec_spkr_i2s, gpio, gsbi1, gsbi2, gsbi3, gsbi4, gsbi4_cam_i2c, gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6, gsbi6_spi_cs1, gsbi6_spi_cs2, gsbi6_spi_cs3, gsbi7, gsbi7_spi_cs1, gsbi7_spi_cs2, gsbi7_spi_cs3, gsbi_cam_i2c, hdmi, mi2s, riva_bt, riva_fm, diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt index e0d35a40981be7deafba5d6da370be4b6c68d685..e33e4dcdce79bdfb51e17b4ab1bbb5602db569b0 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,ipq8064-pinctrl.txt @@ -51,7 +51,7 @@ Valid values for qcom,pins are: Valid values for function are: - mdio, mi2s, pdm, ssbi, spmi, audio_pcm, gsbi1, gsbi2, gsbi4, gsbi5, + mdio, mi2s, pdm, ssbi, spmi, audio_pcm, gpio, gsbi1, gsbi2, gsbi4, gsbi5, gsbi5_spi_cs1, gsbi5_spi_cs2, gsbi5_spi_cs3, gsbi6, gsbi7, nss_spi, sdc1, spdif, nand, tsif1, tsif2, usb_fs_n, usb_fs, usb2_hsic, rgmii2, sata, pcie1_rst, pcie1_prsnt, pcie1_pwren_n, pcie1_pwren, pcie1_pwrflt, diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..93b7de91b9f6f62d824436c003ee332705a1efdb --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8960-pinctrl.txt @@ -0,0 +1,181 @@ +Qualcomm MSM8960 TLMM block + +This binding describes the Top Level Mode Multiplexer block found in the +MSM8960 platform. + +- compatible: + Usage: required + Value type: + Definition: must be "qcom,msm8960-pinctrl" + +- reg: + Usage: required + Value type: + Definition: the base address and size of the TLMM register space. + +- interrupts: + Usage: required + Value type: + Definition: should specify the TLMM summary IRQ. + +- interrupt-controller: + Usage: required + Value type: + Definition: identifies this node as an interrupt controller + +- #interrupt-cells: + Usage: required + Value type: + Definition: must be 2. Specifying the pin number and flags, as defined + in + +- gpio-controller: + Usage: required + Value type: + Definition: identifies this node as a gpio controller + +- #gpio-cells: + Usage: required + Value type: + Definition: must be 2. Specifying the pin number and flags, as defined + in + +Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for +a general description of GPIO and interrupt bindings. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +- pins: + Usage: required + Value type: + Definition: List of gpio pins affected by the properties specified in + this subnode. Valid pins are: + gpio0-gpio151, + sdc1_clk, + sdc1_cmd, + sdc1_data + sdc3_clk, + sdc3_cmd, + sdc3_data + +- function: + Usage: required + Value type: + Definition: Specify the alternative function to be configured for the + specified pins. Functions are only valid for gpio pins. + Valid values are: + audio_pcm, bt, cam_mclk0, cam_mclk1, cam_mclk2, + codec_mic_i2s, codec_spkr_i2s, ext_gps, fm, gps_blanking, + gps_pps_in, gps_pps_out, gp_clk_0a, gp_clk_0b, gp_clk_1a, + gp_clk_1b, gp_clk_2a, gp_clk_2b, gp_mn, gp_pdm_0a, + gp_pdm_0b, gp_pdm_1a, gp_pdm_1b, gp_pdm_2a, gp_pdm_2b, gpio, + gsbi1, gsbi1_spi_cs1_n, gsbi1_spi_cs2a_n, gsbi1_spi_cs2b_n, + gsbi1_spi_cs3_n, gsbi2, gsbi2_spi_cs1_n, gsbi2_spi_cs2_n, + gsbi2_spi_cs3_n, gsbi3, gsbi4, gsbi4_3d_cam_i2c_l, + gsbi4_3d_cam_i2c_r, gsbi5, gsbi5_3d_cam_i2c_l, + gsbi5_3d_cam_i2c_r, gsbi6, gsbi7, gsbi8, gsbi9, gsbi10, + gsbi11, gsbi11_spi_cs1a_n, gsbi11_spi_cs1b_n, + gsbi11_spi_cs2a_n, gsbi11_spi_cs2b_n, gsbi11_spi_cs3_n, + gsbi12, hdmi_cec, hdmi_ddc_clock, hdmi_ddc_data, + hdmi_hot_plug_detect, hsic, mdp_vsync, mi2s, mic_i2s, + pmb_clk, pmb_ext_ctrl, ps_hold, rpm_wdog, sdc2, sdc4, sdc5, + slimbus1, slimbus2, spkr_i2s, ssbi1, ssbi2, ssbi_ext_gps, + ssbi_pmic2, ssbi_qpa1, ssbi_ts, tsif1, tsif2, ts_eoc, + usb_fs1, usb_fs1_oe, usb_fs1_oe_n, usb_fs2, usb_fs2_oe, + usb_fs2_oe_n, vfe_camif_timer1_a, vfe_camif_timer1_b, + vfe_camif_timer2, vfe_camif_timer3_a, vfe_camif_timer3_b, + vfe_camif_timer4_a, vfe_camif_timer4_b, vfe_camif_timer4_c, + vfe_camif_timer5_a, vfe_camif_timer5_b, vfe_camif_timer6_a, + vfe_camif_timer6_b, vfe_camif_timer6_c, vfe_camif_timer7_a, + vfe_camif_timer7_b, vfe_camif_timer7_c, wlan + +- bias-disable: + Usage: optional + Value type: + Definition: The specified pins should be configued as no pull. + +- bias-pull-down: + Usage: optional + Value type: + Definition: The specified pins should be configued as pull down. + +- bias-pull-up: + Usage: optional + Value type: + Definition: The specified pins should be configued as pull up. + +- output-high: + Usage: optional + Value type: + Definition: The specified pins are configured in output mode, driven + high. + Not valid for sdc pins. + +- output-low: + Usage: optional + Value type: + Definition: The specified pins are configured in output mode, driven + low. + Not valid for sdc pins. + +- drive-strength: + Usage: optional + Value type: + Definition: Selects the drive strength for the specified pins, in mA. + Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16 + +Example: + + msmgpio: pinctrl@800000 { + compatible = "qcom,msm8960-pinctrl"; + reg = <0x800000 0x4000>; + + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <0 16 0x4>; + + gsbi8_uart: gsbi8-uart { + mux { + pins = "gpio34", "gpio35"; + function = "gsbi8"; + }; + + tx { + pins = "gpio34"; + drive-strength = <4>; + bias-disable; + }; + + rx { + pins = "gpio35"; + drive-strength = <2>; + bias-pull-up; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt index 73262b575dfc2481b8cf1925a7652dc9020f656d..d2ea80dc43ebca126558ed3f97d8a395f1b63c7c 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8974-pinctrl.txt @@ -70,7 +70,7 @@ Valid values for function are: cam_mckl0, cam_mclk1, cam_mclk2, cam_mclk3, mdp_vsync, hdmi_cec, hdmi_ddc, hdmi_hpd, edp_hpd, gp_pdm0, gp_pdm1, gp_pdm2, gp_pdm3, gp0_clk, gp1_clk, gp_mn, tsif1, tsif2, hsic, grfc, audio_ref_clk, qua_mi2s, pri_mi2s, spkr_mi2s, - ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus + ter_mi2s, sec_mi2s, bt, fm, wlan, slimbus, gpio (Note that this is not yet the complete list of functions) diff --git a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt index 35d2e1f186f0c99ebdab2a66e3c35ce43f4cccc3..daef6fad6a5fb94007a4a0af2d0e4eceb13a47d9 100644 --- a/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/renesas,pfc-pinctrl.txt @@ -15,6 +15,7 @@ Required Properties: - "renesas,pfc-r8a7778": for R8A7778 (R-Mobile M1) compatible pin-controller. - "renesas,pfc-r8a7779": for R8A7779 (R-Car H1) compatible pin-controller. - "renesas,pfc-r8a7790": for R8A7790 (R-Car H2) compatible pin-controller. + - "renesas,pfc-r8a7791": for R8A7791 (R-Car M2) compatible pin-controller. - "renesas,pfc-sh7372": for SH7372 (SH-Mobile AP4) compatible pin-controller. - "renesas,pfc-sh73a0": for SH73A0 (SH-Mobile AG5) compatible pin-controller. diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt index cefef741a40b4e795eee20ae6375a86083427c6d..4658b69d4f4dd3a5876e5967e35edbed6d486eb7 100644 --- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.txt @@ -21,6 +21,7 @@ defined as gpio sub-nodes of the pinmux controller. Required properties for iomux controller: - compatible: one of "rockchip,rk2928-pinctrl", "rockchip,rk3066a-pinctrl" "rockchip,rk3066b-pinctrl", "rockchip,rk3188-pinctrl" + "rockchip,rk3288-pinctrl" - rockchip,grf: phandle referencing a syscon providing the "general register files" @@ -36,7 +37,7 @@ Deprecated properties for iomux controller: Use rockchip,grf and rockchip,pmu described above instead. Required properties for gpio sub nodes: - - compatible: "rockchip,gpio-bank", "rockchip,rk3188-gpio-bank0" + - compatible: "rockchip,gpio-bank" - reg: register of the gpio bank (different than the iomux registerset) - interrupts: base interrupt of the gpio bank in the interrupt controller - clocks: clock that drives this bank @@ -50,6 +51,7 @@ Required properties for gpio sub nodes: bindings/interrupt-controller/interrupts.txt Deprecated properties for gpio sub nodes: + - compatible: "rockchip,rk3188-gpio-bank0" - reg: second element: separate pull register for rk3188 bank0, use rockchip,pmu described above instead diff --git a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt index 2b32783ba8210dda7fd78b231c512a9e672d694a..e82aaf4925176758437552d0becae0aa530387b7 100644 --- a/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt +++ b/Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt @@ -44,7 +44,11 @@ Required Properties: - Pin mux/config groups as child nodes: The pin mux (selecting pin function mode) and pin config (pull up/down, driver strength) settings are represented as child nodes of the pin-controller node. There should be atleast one - child node and there is no limit on the count of these child nodes. + child node and there is no limit on the count of these child nodes. It is + also possible for a child node to consist of several further child nodes + to allow grouping multiple pinctrl groups into one. The format of second + level child nodes is exactly the same as for first level ones and is + described below. The child node should contain a list of pin(s) on which a particular pin function selection or pin configuration (or both) have to applied. This @@ -71,6 +75,7 @@ Required Properties: "samsung,pins" property of the child node. The following pin configuration properties are supported. + - samsung,pin-val: Initial value of pin output buffer. - samsung,pin-pud: Pull up/down configuration. - samsung,pin-drv: Drive strength configuration. - samsung,pin-pud-pdn: Pull up/down configuration in power down mode. @@ -249,6 +254,23 @@ Example 1: A pin-controller node with pin groups. samsung,pin-pud = <3>; samsung,pin-drv = <0>; }; + + sd4_bus8: sd4-bus-width8 { + part-1 { + samsung,pins = "gpk0-3", "gpk0-4", + "gpk0-5", "gpk0-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <3>; + samsung,pin-drv = <3>; + }; + part-2 { + samsung,pins = "gpk1-3", "gpk1-4", + "gpk1-5", "gpk1-6"; + samsung,pin-function = <4>; + samsung,pin-pud = <4>; + samsung,pin-drv = <3>; + }; + }; }; Example 2: A pin-controller node with external wakeup interrupt controller node. diff --git a/Documentation/devicetree/bindings/power/rx51-battery.txt b/Documentation/devicetree/bindings/power/rx51-battery.txt new file mode 100644 index 0000000000000000000000000000000000000000..90438453db58d8692657c0817bcf7854dbf51bba --- /dev/null +++ b/Documentation/devicetree/bindings/power/rx51-battery.txt @@ -0,0 +1,25 @@ +Binding for Nokia N900 battery + +The Nokia N900 battery status can be read via the TWL4030's A/D converter. + +Required properties: +- compatible: Should contain one of the following: + * "nokia,n900-battery" +- io-channels: Should contain IIO channel specifiers + for each element in io-channel-names. +- io-channel-names: Should contain the following values: + * "temp" - The ADC channel for temperature reading + * "bsi" - The ADC channel for battery size identification + * "vbat" - The ADC channel to measure the battery voltage + +Example from Nokia N900: + +battery: n900-battery { + compatible = "nokia,n900-battery"; + io-channels = <&twl4030_madc 0>, + <&twl4030_madc 4>, + <&twl4030_madc 12>; + io-channel-names = "temp", + "bsi", + "vbat"; +}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/board.txt b/Documentation/devicetree/bindings/powerpc/fsl/board.txt index 700dec4774fa912b5958a2bd82c0b0c55569ae2c..cff38bdbc0e4e3fd3ae422ac13c304f3d0e952e6 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/board.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/board.txt @@ -84,3 +84,19 @@ Example: compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c"; reg = <0x66>; }; + +* Freescale on-board CPLD + +Some Freescale boards like T1040RDB have an on board CPLD connected. + +Required properties: +- compatible: Should be a board-specific string like "fsl,-cpld" + Example: + "fsl,t1040rdb-cpld", "fsl,t1042rdb-cpld", "fsl,t1042rdb_pi-cpld" +- reg: should describe CPLD registers + +Example: + cpld@3,0 { + compatible = "fsl,t1040rdb-cpld"; + reg = <3 0 0x300>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt new file mode 100644 index 0000000000000000000000000000000000000000..d47d15a6a2985e7f3eae08db0d9ad3986e80c227 --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.txt @@ -0,0 +1,20 @@ +Rockchip PWM controller + +Required properties: + - compatible: should be "rockchip,-pwm" + "rockchip,rk2928-pwm": found on RK29XX,RK3066 and RK3188 SoCs + "rockchip,rk3288-pwm": found on RK3288 SoC + "rockchip,vop-pwm": found integrated in VOP on RK3288 SoC + - reg: physical base address and length of the controller's registers + - clocks: phandle and clock specifier of the PWM reference clock + - #pwm-cells: should be 2. See pwm.txt in this directory for a + description of the cell format. + +Example: + + pwm0: pwm@20030000 { + compatible = "rockchip,rk2928-pwm"; + reg = <0x20030000 0x10>; + clocks = <&cru PCLK_PWM01>; + #pwm-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/pwm/pwm-st.txt b/Documentation/devicetree/bindings/pwm/pwm-st.txt new file mode 100644 index 0000000000000000000000000000000000000000..84d2fb807d3c0c24611fa6ad3ed3d01c6e11f3ae --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/pwm-st.txt @@ -0,0 +1,41 @@ +STMicroelectronics PWM driver bindings +-------------------------------------- + +Required parameters: +- compatible : "st,pwm" +- #pwm-cells : Number of cells used to specify a PWM. First cell + specifies the per-chip index of the PWM to use and the + second cell is the period in nanoseconds - fixed to 2 + for STiH41x. +- reg : Physical base address and length of the controller's + registers. +- pinctrl-names: Set to "default". +- pinctrl-0: List of phandles pointing to pin configuration nodes + for PWM module. + For Pinctrl properties, please refer to [1]. +- clock-names: Set to "pwm". +- clocks: phandle of the clock used by the PWM module. + For Clk properties, please refer to [2]. + +Optional properties: +- st,pwm-num-chan: Number of available channels. If not passed, the driver + will consider single channel by default. + +[1] Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +[2] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Example: + +pwm1: pwm@fe510000 { + compatible = "st,pwm"; + reg = <0xfe510000 0x68>; + #pwm-cells = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1_chan0_default + &pinctrl_pwm1_chan1_default + &pinctrl_pwm1_chan2_default + &pinctrl_pwm1_chan3_default>; + clocks = <&clk_sysin>; + clock-names = "pwm"; + st,pwm-num-chan = <4>; +}; diff --git a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt index bef1fbb647caab017e4be59db62c1444a2f20f6e..865614b34d6fbb502625c1c1b917c0370bc78ca7 100644 --- a/Documentation/devicetree/bindings/regulator/act8865-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/act8865-regulator.txt @@ -1,13 +1,16 @@ -ACT8865 regulator +ACT88xx regulators ------------------- Required properties: -- compatible: "active-semi,act8865" +- compatible: "active-semi,act8846" or "active-semi,act8865" - reg: I2C slave address Any standard regulator properties can be used to configure the single regulator. The valid names for regulators are: + - for act8846: + REG1, REG2, REG3, REG4, REG5, REG6, REG7, REG8, REG9, REG10, REG11, REG12 + - for act8865: DCDC_REG1, DCDC_REG2, DCDC_REG3, LDO_REG1, LDO_REG2, LDO_REG3, LDO_REG4. Example: diff --git a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt index 42e6b6bc48ff3b5cfe383cf7598ffb42bee5e286..725393c8a7f290f93de13fe5e0f69dd13e138560 100644 --- a/Documentation/devicetree/bindings/regulator/palmas-pmic.txt +++ b/Documentation/devicetree/bindings/regulator/palmas-pmic.txt @@ -7,6 +7,7 @@ Required properties: ti,twl6037-pmic ti,tps65913-pmic ti,tps65914-pmic + ti,tps65917-pmic and also the generic series names ti,palmas-pmic - interrupt-parent : The parent interrupt controller which is palmas. diff --git a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt index d290988ed975fee4883ff6a49a0e5d79ae82feee..20191315e444e94594e03da0965b1d8904be312a 100644 --- a/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/s5m8767-regulator.txt @@ -86,7 +86,7 @@ as per the datasheet of s5m8767. - LDOn - valid values for n are 1 to 28 - - Example: LDO1, LD02, LDO28 + - Example: LDO1, LDO2, LDO28 - BUCKn - valid values for n are 1 to 9. - Example: BUCK1, BUCK2, BUCK9 diff --git a/Documentation/devicetree/bindings/regulator/tps65218.txt b/Documentation/devicetree/bindings/regulator/tps65218.txt new file mode 100644 index 0000000000000000000000000000000000000000..fccc1d24af58a51e5da9bfb3ec08d21ffab18b02 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/tps65218.txt @@ -0,0 +1,23 @@ +TPS65218 family of regulators + +Required properties: +For tps65218 regulators/LDOs +- compatible: + - "ti,tps65218-dcdc1" for DCDC1 + - "ti,tps65218-dcdc2" for DCDC2 + - "ti,tps65218-dcdc3" for DCDC3 + - "ti,tps65218-dcdc4" for DCDC4 + - "ti,tps65218-dcdc5" for DCDC5 + - "ti,tps65218-dcdc6" for DCDC6 + - "ti,tps65218-ldo1" for LDO1 + +Optional properties: +- Any optional property defined in bindings/regulator/regulator.txt + +Example: + + xyz: regulator@0 { + compatible = "ti,tps65218-dcdc1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + }; diff --git a/Documentation/devicetree/bindings/serial/cdns,uart.txt b/Documentation/devicetree/bindings/serial/cdns,uart.txt new file mode 100644 index 0000000000000000000000000000000000000000..a3eb154c32caf9f273c8801811565722a3201e38 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/cdns,uart.txt @@ -0,0 +1,20 @@ +Binding for Cadence UART Controller + +Required properties: +- compatible : should be "cdns,uart-r1p8", or "xlnx,xuartps" +- reg: Should contain UART controller registers location and length. +- interrupts: Should contain UART controller interrupts. +- clocks: Must contain phandles to the UART clocks + See ../clocks/clock-bindings.txt for details. +- clock-names: Tuple to identify input clocks, must contain "uart_clk" and "pclk" + See ../clocks/clock-bindings.txt for details. + + +Example: + uart@e0000000 { + compatible = "cdns,uart-r1p8"; + clocks = <&clkc 23>, <&clkc 40>; + clock-names = "uart_clk", "pclk"; + reg = <0xE0000000 0x1000>; + interrupts = <0 27 4>; + }; diff --git a/Documentation/devicetree/bindings/serial/efm32-uart.txt b/Documentation/devicetree/bindings/serial/efm32-uart.txt index 3ca01336b837e7cef89358bda62e7a7d7532dc5b..8adbab268ca3997f50c134081d2f84409d8d10e3 100644 --- a/Documentation/devicetree/bindings/serial/efm32-uart.txt +++ b/Documentation/devicetree/bindings/serial/efm32-uart.txt @@ -6,7 +6,7 @@ Required properties: - interrupts : Should contain uart interrupt Optional properties: -- efm32,location : Decides the location of the USART I/O pins. +- energymicro,location : Decides the location of the USART I/O pins. Allowed range : [0 .. 5] Default: 0 @@ -16,5 +16,5 @@ uart@0x4000c400 { compatible = "energymicro,efm32-uart"; reg = <0x4000c400 0x400>; interrupts = <15>; - efm32,location = <0>; + energymicro,location = <0>; }; diff --git a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt index a1d1205d81855ea61b4f67f42cbd04acd38f25b3..c95005efbcb87099000d567a3f7c82382bb76284 100644 --- a/Documentation/devicetree/bindings/serial/fsl-lpuart.txt +++ b/Documentation/devicetree/bindings/serial/fsl-lpuart.txt @@ -1,7 +1,11 @@ * Freescale low power universal asynchronous receiver/transmitter (lpuart) Required properties: -- compatible : Should be "fsl,-lpuart" +- compatible : + - "fsl,vf610-lpuart" for lpuart compatible with the one integrated + on Vybrid vf610 SoC with 8-bit register organization + - "fsl,ls1021a-lpuart" for lpuart compatible with the one integrated + on LS1021A SoC with 32-bit big-endian register organization - reg : Address and length of the register set for the device - interrupts : Should contain uart interrupt - clocks : phandle + clock specifier pairs, one for each entry in clock-names diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.txt b/Documentation/devicetree/bindings/serial/samsung_uart.txt index 2c8a17cf5cb53c6ce75feadd65611d708252d2b1..e85f37ec33f0277b27ab7aa4f39c4b34c4cbfcd2 100644 --- a/Documentation/devicetree/bindings/serial/samsung_uart.txt +++ b/Documentation/devicetree/bindings/serial/samsung_uart.txt @@ -1,14 +1,58 @@ * Samsung's UART Controller -The Samsung's UART controller is used for interfacing SoC with serial communicaion -devices. +The Samsung's UART controller is used for interfacing SoC with serial +communicaion devices. Required properties: -- compatible: should be - - "samsung,exynos4210-uart", for UART's compatible with Exynos4210 uart ports. +- compatible: should be one of following: + - "samsung,exynos4210-uart" - Exynos4210 SoC, + - "samsung,s3c2410-uart" - compatible with ports present on S3C2410 SoC, + - "samsung,s3c2412-uart" - compatible with ports present on S3C2412 SoC, + - "samsung,s3c2440-uart" - compatible with ports present on S3C2440 SoC, + - "samsung,s3c6400-uart" - compatible with ports present on S3C6400 SoC, + - "samsung,s5pv210-uart" - compatible with ports present on S5PV210 SoC. - reg: base physical address of the controller and length of memory mapped region. -- interrupts: interrupt number to the cpu. The interrupt specifier format depends - on the interrupt controller parent. +- interrupts: a single interrupt signal to SoC interrupt controller, + according to interrupt bindings documentation [1]. + +- clock-names: input names of clocks used by the controller: + - "uart" - controller bus clock, + - "clk_uart_baudN" - Nth baud base clock input (N = 0, 1, ...), + according to SoC User's Manual (only N = 0 is allowedfor SoCs without + internal baud clock mux). +- clocks: phandles and specifiers for all clocks specified in "clock-names" + property, in the same order, according to clock bindings documentation [2]. + +[1] Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +[2] Documentation/devicetree/bindings/clock/clock-bindings.txt + +Optional properties: +- samsung,uart-fifosize: The fifo size supported by the UART channel + +Note: Each Samsung UART should have an alias correctly numbered in the +"aliases" node, according to serialN format, where N is the port number +(non-negative decimal integer) as specified by User's Manual of respective +SoC. + +Example: + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + +Example: + uart1: serial@7f005400 { + compatible = "samsung,s3c6400-uart"; + reg = <0x7f005400 0x100>; + interrupt-parent = <&vic1>; + interrupts = <6>; + clock-names = "uart", "clk_uart_baud2", + "clk_uart_baud3"; + clocks = <&clocks PCLK_UART1>, <&clocks PCLK_UART1>, + <&clocks SCLK_UART>; + samsung,uart-fifosize = <16>; + }; diff --git a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt index f13f1c5be91cab181bbd97783eef013c7bda1585..7f76214f728aa6028f133a94d04f183ccb3b1c38 100644 --- a/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt +++ b/Documentation/devicetree/bindings/serial/snps-dw-apb-uart.txt @@ -4,9 +4,18 @@ Required properties: - compatible : "snps,dw-apb-uart" - reg : offset and length of the register set for the device. - interrupts : should contain uart interrupt. + +Clock handling: +The clock rate of the input clock needs to be supplied by one of - clock-frequency : the input clock frequency for the UART. +- clocks : phandle to the input clock + +The supplying peripheral clock can also be handled, needing a second property +- clock-names: tuple listing input clock names. + Required elements: "baudclk", "apb_pclk" Optional properties: +- resets : phandle to the parent reset controller. - reg-shift : quantity to shift the register offsets by. If this property is not present then the register offsets are not shifted. - reg-io-width : the size (in bytes) of the IO accesses that should be @@ -23,3 +32,26 @@ Example: reg-shift = <2>; reg-io-width = <4>; }; + +Example with one clock: + + uart@80230000 { + compatible = "snps,dw-apb-uart"; + reg = <0x80230000 0x100>; + clocks = <&baudclk>; + interrupts = <10>; + reg-shift = <2>; + reg-io-width = <4>; + }; + +Example with two clocks: + + uart@80230000 { + compatible = "snps,dw-apb-uart"; + reg = <0x80230000 0x100>; + clocks = <&baudclk>, <&apb_pclk>; + clock-names = "baudclk", "apb_pclk"; + interrupts = <10>; + reg-shift = <2>; + reg-io-width = <4>; + }; diff --git a/Documentation/devicetree/bindings/sound/ak5386.txt b/Documentation/devicetree/bindings/sound/ak5386.txt index dc3914fe6ce8b423fe8f220eb98bad0d3a21348a..ec3df3abba0cf06dec5252b8564a35c1efd7aa0a 100644 --- a/Documentation/devicetree/bindings/sound/ak5386.txt +++ b/Documentation/devicetree/bindings/sound/ak5386.txt @@ -10,10 +10,14 @@ Optional properties: - reset-gpio : a GPIO spec for the reset/power down pin. If specified, it will be deasserted at probe time. + - va-supply : a regulator spec, providing 5.0V + - vd-supply : a regulator spec, providing 3.3V Example: spdif: ak5386@0 { compatible = "asahi-kasei,ak5386"; reset-gpio = <&gpio0 23>; + va-supply = <&vdd_5v0_reg>; + vd-supply = <&vdd_3v3_reg>; }; diff --git a/Documentation/devicetree/bindings/sound/cs4265.txt b/Documentation/devicetree/bindings/sound/cs4265.txt new file mode 100644 index 0000000000000000000000000000000000000000..380fff8e4e8323c73bad184e497eae3b830fabc5 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs4265.txt @@ -0,0 +1,29 @@ +CS4265 audio CODEC + +This device supports I2C only. + +Required properties: + + - compatible : "cirrus,cs4265" + + - reg : the I2C address of the device for I2C. The I2C address depends on + the state of the AD0 pin. If AD0 is high, the i2c address is 0x4f. + If it is low, the i2c address is 0x4e. + +Optional properties: + + - reset-gpios : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the codec starts. + +Examples: + +codec_ad0_high: cs4265@4f { /* AD0 Pin is high */ + compatible = "cirrus,cs4265"; + reg = <0x4f>; +}; + + +codec_ad0_low: cs4265@4e { /* AD0 Pin is low */ + compatible = "cirrus,cs4265"; + reg = <0x4e>; +}; diff --git a/Documentation/devicetree/bindings/sound/fsl,asrc.txt b/Documentation/devicetree/bindings/sound/fsl,asrc.txt new file mode 100644 index 0000000000000000000000000000000000000000..b93362a570be8aefeee64b5a16c01e37d7d92500 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/fsl,asrc.txt @@ -0,0 +1,60 @@ +Freescale Asynchronous Sample Rate Converter (ASRC) Controller + +The Asynchronous Sample Rate Converter (ASRC) converts the sampling rate of a +signal associated with an input clock into a signal associated with a different +output clock. The driver currently works as a Front End of DPCM with other Back +Ends Audio controller such as ESAI, SSI and SAI. It has three pairs to support +three substreams within totally 10 channels. + +Required properties: + + - compatible : Contains "fsl,imx35-asrc" or "fsl,imx53-asrc". + + - reg : Offset and length of the register set for the device. + + - interrupts : Contains the spdif interrupt. + + - dmas : Generic dma devicetree binding as described in + Documentation/devicetree/bindings/dma/dma.txt. + + - dma-names : Contains "rxa", "rxb", "rxc", "txa", "txb" and "txc". + + - clocks : Contains an entry for each entry in clock-names. + + - clock-names : Contains the following entries + "mem" Peripheral access clock to access registers. + "ipg" Peripheral clock to driver module. + "asrck_<0-f>" Clock sources for input and output clock. + + - big-endian : If this property is absent, the little endian mode + will be in use as default. Otherwise, the big endian + mode will be in use for all the device registers. + + - fsl,asrc-rate : Defines a mutual sample rate used by DPCM Back Ends. + + - fsl,asrc-width : Defines a mutual sample width used by DPCM Back Ends. + +Example: + +asrc: asrc@02034000 { + compatible = "fsl,imx53-asrc"; + reg = <0x02034000 0x4000>; + interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks 107>, <&clks 107>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>, + <&clks 107>, <&clks 0>, <&clks 0>; + clock-names = "mem", "ipg", "asrck0", + "asrck_1", "asrck_2", "asrck_3", "asrck_4", + "asrck_5", "asrck_6", "asrck_7", "asrck_8", + "asrck_9", "asrck_a", "asrck_b", "asrck_c", + "asrck_d", "asrck_e", "asrck_f"; + dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>, + <&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>; + dma-names = "rxa", "rxb", "rxc", + "txa", "txb", "txc"; + fsl,asrc-rate = <48000>; + fsl,asrc-width = <16>; + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/sound/max98090.txt b/Documentation/devicetree/bindings/sound/max98090.txt index a5e63fa47dc5d0e6fcb5adc2bbc010158f86b904..c454e67f54bbc04c04187796b6097aba68bb744d 100644 --- a/Documentation/devicetree/bindings/sound/max98090.txt +++ b/Documentation/devicetree/bindings/sound/max98090.txt @@ -4,7 +4,7 @@ This device supports I2C only. Required properties: -- compatible : "maxim,max98090". +- compatible : "maxim,max98090" or "maxim,max98091". - reg : The I2C address of the device. diff --git a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt index 8346cab046cd82d1f57447dffaa0d2354d9746b1..aa697abf337e7aa645f435fb9e77b809f62a49df 100644 --- a/Documentation/devicetree/bindings/sound/renesas,rsnd.txt +++ b/Documentation/devicetree/bindings/sound/renesas,rsnd.txt @@ -13,6 +13,9 @@ Required properties: - rcar_sound,src : Should contain SRC feature. The number of SRC subnode should be same as HW. see below for detail. +- rcar_sound,dvc : Should contain DVC feature. + The number of DVC subnode should be same as HW. + see below for detail. - rcar_sound,dai : DAI contents. The number of DAI subnode should be same as HW. see below for detail. @@ -21,6 +24,7 @@ SSI subnode properties: - interrupts : Should contain SSI interrupt for PIO transfer - shared-pin : if shared clock pin - pio-transfer : use PIO transfer mode +- no-busif : BUSIF is not ussed when [mem -> SSI] via DMA case SRC subnode properties: no properties at this point @@ -39,6 +43,11 @@ rcar_sound: rcar_sound@0xffd90000 { <0 0xec540000 0 0x1000>, /* SSIU */ <0 0xec541000 0 0x1280>; /* SSI */ + rcar_sound,dvc { + dvc0: dvc@0 { }; + dvc1: dvc@1 { }; + }; + rcar_sound,src { src0: src@0 { }; src1: src@1 { }; diff --git a/Documentation/devicetree/bindings/sound/rockchip-i2s.txt b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt new file mode 100644 index 0000000000000000000000000000000000000000..6c55fcfe5e1d095f5b3303df5351c99a7319d86b --- /dev/null +++ b/Documentation/devicetree/bindings/sound/rockchip-i2s.txt @@ -0,0 +1,37 @@ +* Rockchip I2S controller + +The I2S bus (Inter-IC sound bus) is a serial link for digital +audio data transfer between devices in the system. + +Required properties: + +- compatible: should be one of the followings + - "rockchip,rk3066-i2s": for rk3066 + - "rockchip,rk3188-i2s", "rockchip,rk3066-i2s": for rk3188 + - "rockchip,rk3288-i2s", "rockchip,rk3066-i2s": for rk3288 +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: should contain the I2S interrupt. +- #address-cells: should be 1. +- #size-cells: should be 0. +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: should include "tx" and "rx". +- clocks: a list of phandle + clock-specifer pairs, one for each entry in clock-names. +- clock-names: should contain followings: + - "i2s_hclk": clock for I2S BUS + - "i2s_clk" : clock for I2S controller + +Example for rk3288 I2S controller: + +i2s@ff890000 { + compatible = "rockchip,rk3288-i2s", "rockchip,rk3066-i2s"; + reg = <0xff890000 0x10000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + dmas = <&pdma1 0>, <&pdma1 1>; + dma-names = "rx", "tx"; + clock-names = "i2s_hclk", "i2s_clk"; + clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>; +}; diff --git a/Documentation/devicetree/bindings/sound/samsung,odroidx2-max98090.txt b/Documentation/devicetree/bindings/sound/samsung,odroidx2-max98090.txt new file mode 100644 index 0000000000000000000000000000000000000000..9148f72319e15ba7ace42e0050ec8bd7f957fa9a --- /dev/null +++ b/Documentation/devicetree/bindings/sound/samsung,odroidx2-max98090.txt @@ -0,0 +1,35 @@ +Samsung Exynos Odroid X2/U3 audio complex with MAX98090 codec + +Required properties: + - compatible : "samsung,odroidx2-audio" - for Odroid X2 board, + "samsung,odroidu3-audio" - for Odroid U3 board + - samsung,model : the user-visible name of this sound complex + - samsung,i2s-controller : the phandle of the I2S controller + - samsung,audio-codec : the phandle of the MAX98090 audio codec + - samsung,audio-routing : a list of the connections between audio + components; each entry is a pair of strings, the first being the + connection's sink, the second being the connection's source; + valid names for sources and sinks are the MAX98090's pins (as + documented in its binding), and the jacks on the board + For Odroid X2: + * Headphone Jack + * Mic Jack + * DMIC + + For Odroid U3: + * Headphone Jack + * Speakers + +Example: + +sound { + compatible = "samsung,odroidu3-audio"; + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&max98090>; + samsung,model = "Odroid-X2"; + samsung,audio-routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "IN1", "Mic Jack", + "Mic Jack", "MICBIAS"; +}; diff --git a/Documentation/devicetree/bindings/sound/sirf-usp.txt b/Documentation/devicetree/bindings/sound/sirf-usp.txt new file mode 100644 index 0000000000000000000000000000000000000000..02f85b32d3598333dafb94971c2ecf88ae4c8f20 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/sirf-usp.txt @@ -0,0 +1,27 @@ +* SiRF SoC USP module + +Required properties: +- compatible: "sirf,prima2-usp-pcm" +- reg: Base address and size entries: +- dmas: List of DMA controller phandle and DMA request line ordered pairs. +- dma-names: Identifier string for each DMA request line in the dmas property. + These strings correspond 1:1 with the ordered pairs in dmas. + + One of the DMA channels will be responsible for transmission (should be + named "tx") and one for reception (should be named "rx"). + +- clocks: USP controller clock source +- pinctrl-names: Must contain a "default" entry. +- pinctrl-NNN: One property must exist for each entry in pinctrl-names. + +Example: +usp0: usp@b0080000 { + compatible = "sirf,prima2-usp-pcm"; + reg = <0xb0080000 0x10000>; + clocks = <&clks 28>; + dmas = <&dmac1 1>, <&dmac1 2>; + dma-names = "rx", "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&usp0_only_utfs_pins_a>; +}; + diff --git a/Documentation/devicetree/bindings/sound/snow.txt b/Documentation/devicetree/bindings/sound/snow.txt index 678b191c37b8922e7ca2dc418407a1fdd7c1c64b..6df74f15687f9839cd2015eae1d6a091d15433b5 100644 --- a/Documentation/devicetree/bindings/sound/snow.txt +++ b/Documentation/devicetree/bindings/sound/snow.txt @@ -3,15 +3,20 @@ Audio Binding for Snow boards Required properties: - compatible : Can be one of the following, "google,snow-audio-max98090" or + "google,snow-audio-max98091" or "google,snow-audio-max98095" - samsung,i2s-controller: The phandle of the Samsung I2S controller - samsung,audio-codec: The phandle of the audio codec +Optional: +- samsung,model: The name of the sound-card + Example: sound { compatible = "google,snow-audio-max98095"; + samsung,model = "Snow-I2S-MAX98095"; samsung,i2s-controller = <&i2s0>; samsung,audio-codec = <&max98095>; }; diff --git a/Documentation/devicetree/bindings/sound/tas2552.txt b/Documentation/devicetree/bindings/sound/tas2552.txt new file mode 100644 index 0000000000000000000000000000000000000000..55e2a0af5645f96aa5b60531755713aaa88eb4bb --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tas2552.txt @@ -0,0 +1,26 @@ +Texas Instruments - tas2552 Codec module + +The tas2552 serial control bus communicates through I2C protocols + +Required properties: + - compatible - One of: + "ti,tas2552" - TAS2552 + - reg - I2C slave address + - supply-*: Required supply regulators are: + "vbat" battery voltage + "iovdd" I/O Voltage + "avdd" Analog DAC Voltage + +Optional properties: + - enable-gpio - gpio pin to enable/disable the device + +Example: + +tas2552: tas2552@41 { + compatible = "ti,tas2552"; + reg = <0x41>; + enable-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; +}; + +For more product information please see the link below: +http://www.ti.com/product/TAS2552 diff --git a/Documentation/devicetree/bindings/sound/ti,tas5086.txt b/Documentation/devicetree/bindings/sound/ti,tas5086.txt index d2866a0d6a262694ddc7dfd447da87a37a031a23..234dad296da7149ec0a910a3e4410c8871a0cd1e 100644 --- a/Documentation/devicetree/bindings/sound/ti,tas5086.txt +++ b/Documentation/devicetree/bindings/sound/ti,tas5086.txt @@ -31,6 +31,9 @@ Optional properties: Most systems should not set any of these properties. + - avdd-supply: Power supply for AVDD, providing 3.3V + - dvdd-supply: Power supply for DVDD, providing 3.3V + Examples: i2c_bus { @@ -39,5 +42,7 @@ Examples: reg = <0x1b>; reset-gpio = <&gpio 23 0>; ti,charge-period = <156000>; + avdd-supply = <&vdd_3v3_reg>; + dvdd-supply = <&vdd_3v3_reg>; }; }; diff --git a/Documentation/devicetree/bindings/sound/wm8904.txt b/Documentation/devicetree/bindings/sound/wm8904.txt new file mode 100644 index 0000000000000000000000000000000000000000..e99f4097c83c4e343f0ce2829c73217b6df3c5b0 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/wm8904.txt @@ -0,0 +1,33 @@ +WM8904 audio CODEC + +This device supports I2C only. + +Required properties: + - compatible: "wlf,wm8904" + - reg: the I2C address of the device. + - clock-names: "mclk" + - clocks: reference to + + +Pins on the device (for linking into audio routes): + + * IN1L + * IN1R + * IN2L + * IN2R + * IN3L + * IN3R + * HPOUTL + * HPOUTR + * LINEOUTL + * LINEOUTR + * MICBIAS + +Examples: + +codec: wm8904@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + clocks = <&pck0>; + clock-names = "mclk"; +}; diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt index 130cd17e3680d825777d52e464b8a28e3597b9b8..750e29aff9bc529ba721a3c842fd85ec37e1e132 100644 --- a/Documentation/devicetree/bindings/spi/efm32-spi.txt +++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt @@ -10,11 +10,12 @@ Required properties: - cs-gpios: see spi-bus.txt Recommended properties : -- efm32,location: Value to write to the ROUTE register's LOCATION bitfield to - configure the pinmux for the device, see datasheet for values. - If "efm32,location" property is not provided, keeping what is - already configured in the hardware, so its either the reset - default 0 or whatever the bootloader did. +- energymicro,location: Value to write to the ROUTE register's LOCATION + bitfield to configure the pinmux for the device, see + datasheet for values. + If this property is not provided, keeping what is + already configured in the hardware, so its either the + reset default 0 or whatever the bootloader did. Example: @@ -26,7 +27,7 @@ spi1: spi@0x4000c400 { /* USART1 */ interrupts = <15 16>; clocks = <&cmu 20>; cs-gpios = <&gpio 51 1>; // D3 - efm32,location = <1>; + energymicro,location = <1>; status = "ok"; ks8851@0 { diff --git a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt index bee6ff204bafe6a79cf113541c1c0cd90a091938..e2c88df2cc15ae75677b0562d3a1a9bf4d102bd9 100644 --- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt +++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt @@ -7,7 +7,11 @@ SPI in master mode supports up to 50MHz, up to four chip selects, programmable data path from 4 bits to 32 bits and numerous protocol variants. Required properties: -- compatible: Should contain "qcom,spi-qup-v2.1.1" or "qcom,spi-qup-v2.2.1" +- compatible: Should contain: + "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064. + "qcom,spi-qup-v2.1.1" for 8974 and later + "qcom,spi-qup-v2.2.1" for 8974 v2 and later. + - reg: Should contain base register location and length - interrupts: Interrupt number used by this controller diff --git a/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt new file mode 100644 index 0000000000000000000000000000000000000000..bd99193e87b9ea2b68d2b81945e4d27a144f9950 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/snps,dw-apb-ssi.txt @@ -0,0 +1,28 @@ +Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface. + +Required properties: +- compatible : "snps,dw-apb-ssi" +- reg : The register base for the controller. +- interrupts : One interrupt, used by the controller. +- #address-cells : <1>, as required by generic SPI binding. +- #size-cells : <0>, also as required by generic SPI binding. + +Optional properties: +- cs-gpios : Specifies the gpio pis to be used for chipselects. +- num-cs : The number of chipselects. If omitted, this will default to 4. + +Child nodes as per the generic SPI binding. + +Example: + + spi@fff00000 { + compatible = "snps,dw-apb-ssi"; + reg = <0xfff00000 0x1000>; + interrupts = <0 154 4>; + #address-cells = <1>; + #size-cells = <0>; + num-cs = <2>; + cs-gpios = <&gpio0 13 0>, + <&gpio0 14 0>; + }; + diff --git a/Documentation/devicetree/bindings/spi/spi-davinci.txt b/Documentation/devicetree/bindings/spi/spi-davinci.txt index 6d0ac8d0ad9b69c1950c7d420bb352bd98203d4a..f80887bca0d678ecfd4a160455f1d9d46eebcf9d 100644 --- a/Documentation/devicetree/bindings/spi/spi-davinci.txt +++ b/Documentation/devicetree/bindings/spi/spi-davinci.txt @@ -8,7 +8,8 @@ Required properties: - "ti,dm6441-spi" for SPI used similar to that on DM644x SoC family - "ti,da830-spi" for SPI used similar to that on DA8xx SoC family - reg: Offset and length of SPI controller register space -- num-cs: Number of chip selects +- num-cs: Number of chip selects. This includes internal as well as + GPIO chip selects. - ti,davinci-spi-intr-line: interrupt line used to connect the SPI IP to the interrupt controller within the SoC. Possible values are 0 and 1. Manual says one of the two possible interrupt @@ -17,6 +18,12 @@ Required properties: - interrupts: interrupt number mapped to CPU. - clocks: spi clk phandle +Optional: +- cs-gpios: gpio chip selects + For example to have 3 internal CS and 2 GPIO CS, user could define + cs-gpios = <0>, <0>, <0>, <&gpio1 30 0>, <&gpio1 31 0>; + where first three are internal CS and last two are GPIO CS. + Example of a NOR flash slave device (n25q032) connected to DaVinci SPI controller device over the SPI bus. diff --git a/Documentation/devicetree/bindings/spi/spi-rockchip.txt b/Documentation/devicetree/bindings/spi/spi-rockchip.txt new file mode 100644 index 0000000000000000000000000000000000000000..7bab355758173f428ef256e73bd06f2ac6221f8e --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-rockchip.txt @@ -0,0 +1,37 @@ +* Rockchip SPI Controller + +The Rockchip SPI controller is used to interface with various devices such as flash +and display controllers using the SPI communication interface. + +Required Properties: + +- compatible: should be one of the following. + "rockchip,rk3066-spi" for rk3066. + "rockchip,rk3188-spi", "rockchip,rk3066-spi" for rk3188. + "rockchip,rk3288-spi", "rockchip,rk3066-spi" for rk3288. +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. +- clocks: Must contain an entry for each entry in clock-names. +- clock-names: Shall be "spiclk" for the transfer-clock, and "apb_pclk" for + the peripheral clock. +- dmas: DMA specifiers for tx and rx dma. See the DMA client binding, + Documentation/devicetree/bindings/dma/dma.txt +- dma-names: DMA request names should include "tx" and "rx" if present. +- #address-cells: should be 1. +- #size-cells: should be 0. + +Example: + + spi0: spi@ff110000 { + compatible = "rockchip,rk3066-spi"; + reg = <0xff110000 0x1000>; + dmas = <&pdma1 11>, <&pdma1 12>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = ; + clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; + clock-names = "spiclk", "apb_pclk"; + }; diff --git a/Documentation/devicetree/bindings/spi/spi-samsung.txt b/Documentation/devicetree/bindings/spi/spi-samsung.txt index 86aa061f069fda0d8e9e38f3eb04a06b8d2325ef..1e8a8578148fe39c1c6c8abfc48d72f59cc50762 100644 --- a/Documentation/devicetree/bindings/spi/spi-samsung.txt +++ b/Documentation/devicetree/bindings/spi/spi-samsung.txt @@ -8,7 +8,6 @@ Required SoC Specific Properties: - compatible: should be one of the following. - samsung,s3c2443-spi: for s3c2443, s3c2416 and s3c2450 platforms - samsung,s3c6410-spi: for s3c6410 platforms - - samsung,s5p6440-spi: for s5p6440 and s5p6450 platforms - samsung,s5pv210-spi: for s5pv210 and s5pc110 platforms - samsung,exynos4210-spi: for exynos4 and exynos5 platforms @@ -18,14 +17,11 @@ Required SoC Specific Properties: - interrupts: The interrupt number to the cpu. The interrupt specifier format depends on the interrupt controller. -[PRELIMINARY: the dma channel allocation will change once there are -official DMA bindings] +- dmas : Two or more DMA channel specifiers following the convention outlined + in bindings/dma/dma.txt -- tx-dma-channel: The dma channel specifier for tx operations. The format of - the dma specifier depends on the dma controller. - -- rx-dma-channel: The dma channel specifier for rx operations. The format of - the dma specifier depends on the dma controller. +- dma-names: Names for the dma channels. There must be at least one channel + named "tx" for transmit and named "rx" for receive. Required Board Specific Properties: @@ -42,15 +38,13 @@ Optional Board Specific Properties: - num-cs: Specifies the number of chip select lines supported. If not specified, the default number of chip select lines is set to 1. +- cs-gpios: should specify GPIOs used for chipselects (see spi-bus.txt) + SPI Controller specific data in SPI slave nodes: - The spi slave nodes should provide the following information which is required by the spi controller. - - cs-gpio: A gpio specifier that specifies the gpio line used as - the slave select line by the spi controller. The format of the gpio - specifier depends on the gpio controller. - - samsung,spi-feedback-delay: The sampling phase shift to be applied on the miso line (to account for any lag in the miso line). The following are the valid values. @@ -74,8 +68,11 @@ Example: compatible = "samsung,exynos4210-spi"; reg = <0x12d20000 0x100>; interrupts = <0 66 0>; - tx-dma-channel = <&pdma0 5>; - rx-dma-channel = <&pdma0 4>; + dmas = <&pdma0 5 + &pdma0 4>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; }; - Board Specific Portion: @@ -85,6 +82,7 @@ Example: #size-cells = <0>; pinctrl-names = "default"; pinctrl-0 = <&spi0_bus>; + cs-gpios = <&gpa2 5 0>; w25q80bw@0 { #address-cells = <1>; @@ -94,7 +92,6 @@ Example: spi-max-frequency = <10000>; controller-data { - cs-gpio = <&gpa2 5 1 0 3>; samsung,spi-feedback-delay = <0>; }; diff --git a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt index c94909215c0785691395840de27ec80b2de0c42b..ae738f562acca6bf915ef5691dfd32da9d2e23c8 100644 --- a/Documentation/devicetree/bindings/thermal/exynos-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/exynos-thermal.txt @@ -3,6 +3,7 @@ ** Required properties: - compatible : One of the following: + "samsung,exynos3250-tmu" "samsung,exynos4412-tmu" "samsung,exynos4210-tmu" "samsung,exynos5250-tmu" diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt index 28ef498a66e598e0399a3095f625781fe2d2d575..0ef00be44b0137e7435c13c57c379654937b4592 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt @@ -1,7 +1,13 @@ * Renesas R-Car Thermal Required properties: -- compatible : "renesas,rcar-thermal" +- compatible : "renesas,thermal-", "renesas,rcar-thermal" + as fallback. + Examples with soctypes are: + - "renesas,thermal-r8a73a4" (R-Mobile AP6) + - "renesas,thermal-r8a7779" (R-Car H1) + - "renesas,thermal-r8a7790" (R-Car H2) + - "renesas,thermal-r8a7791" (R-Car M2) - reg : Address range of the thermal registers. The 1st reg will be recognized as common register if it has "interrupts". @@ -12,18 +18,18 @@ Option properties: Example (non interrupt support): -thermal@e61f0100 { - compatible = "renesas,rcar-thermal"; - reg = <0xe61f0100 0x38>; +thermal@ffc48000 { + compatible = "renesas,thermal-r8a7779", "renesas,rcar-thermal"; + reg = <0xffc48000 0x38>; }; Example (interrupt support): thermal@e61f0000 { - compatible = "renesas,rcar-thermal"; + compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal"; reg = <0xe61f0000 0x14 0xe61f0100 0x38 0xe61f0200 0x38 0xe61f0300 0x38>; - interrupts = <0 69 4>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; }; diff --git a/Documentation/devicetree/bindings/thermal/st-thermal.txt b/Documentation/devicetree/bindings/thermal/st-thermal.txt new file mode 100644 index 0000000000000000000000000000000000000000..3b9251b4a1456ca7e6565fd33bd11c9597c45170 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/st-thermal.txt @@ -0,0 +1,42 @@ +Binding for Thermal Sensor driver for STMicroelectronics STi series of SoCs. + +Required parameters: +------------------- + +compatible : st,--thermal; should be one of: + "st,stih415-sas-thermal", + "st,stih415-mpe-thermal", + "st,stih416-sas-thermal" + "st,stih416-mpe-thermal" + "st,stid127-thermal" or + "st,stih407-thermal" + according to the SoC type (stih415, stih416, stid127, stih407) + and module type (sas or mpe). On stid127 & stih407 there is only + one die/module, so there is no module type in the compatible + string. +clock-names : Should be "thermal". + See: Documentation/devicetree/bindings/resource-names.txt +clocks : Phandle of the clock used by the thermal sensor. + See: Documentation/devicetree/bindings/clock/clock-bindings.txt + +Optional parameters: +------------------- + +reg : For non-sysconf based sensors, this should be the physical base + address and length of the sensor's registers. +interrupts : Standard way to define interrupt number. + Interrupt is mandatory to be defined when compatible is + "stih416-mpe-thermal". + NB: For thermal sensor's for which no interrupt has been + defined, a polling delay of 1000ms will be used to read the + temperature from device. + +Example: + + temp1@fdfe8000 { + compatible = "st,stih416-mpe-thermal"; + reg = <0xfdfe8000 0x10>; + clock-names = "thermal"; + clocks = <&clk_m_mpethsens>; + interrupts = ; + }; diff --git a/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt b/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt new file mode 100644 index 0000000000000000000000000000000000000000..cd55b52548e410344940c7e26460ddda6220164c --- /dev/null +++ b/Documentation/devicetree/bindings/timer/cirrus,clps711x-timer.txt @@ -0,0 +1,29 @@ +* Cirrus Logic CLPS711X Timer Counter + +Required properties: +- compatible: Shall contain "cirrus,clps711x-timer". +- reg : Address and length of the register set. +- interrupts: The interrupt number of the timer. +- clocks : phandle of timer reference clock. + +Note: Each timer should have an alias correctly numbered in "aliases" node. + +Example: + aliases { + timer0 = &timer1; + timer1 = &timer2; + }; + + timer1: timer@80000300 { + compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer"; + reg = <0x80000300 0x4>; + interrupts = <8>; + clocks = <&clks 5>; + }; + + timer2: timer@80000340 { + compatible = "cirrus,ep7312-timer", "cirrus,clps711x-timer"; + reg = <0x80000340 0x4>; + interrupts = <9>; + clocks = <&clks 6>; + }; diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt new file mode 100644 index 0000000000000000000000000000000000000000..7c4408ff4b8326478273251f34694c4f3cdf663b --- /dev/null +++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt @@ -0,0 +1,17 @@ +Mediatek MT6577, MT6572 and MT6589 Timers +--------------------------------------- + +Required properties: +- compatible: Should be "mediatek,mt6577-timer" +- reg: Should contain location and length for timers register. +- clocks: Clocks driving the timer hardware. This list should include two + clocks. The order is system clock and as second clock the RTC clock. + +Examples: + + timer@10008000 { + compatible = "mediatek,mt6577-timer"; + reg = <0x10008000 0x80>; + interrupts = ; + clocks = <&system_clk>, <&rtc_clk>; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,cmt.txt b/Documentation/devicetree/bindings/timer/renesas,cmt.txt new file mode 100644 index 0000000000000000000000000000000000000000..a17418b0ece324b657355158afdd8ff4b1cc573c --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,cmt.txt @@ -0,0 +1,47 @@ +* Renesas R-Car Compare Match Timer (CMT) + +The CMT is a multi-channel 16/32/48-bit timer/counter with configurable clock +inputs and programmable compare match. + +Channels share hardware resources but their counter and compare match value +are independent. A particular CMT instance can implement only a subset of the +channels supported by the CMT model. Channel indices represent the hardware +position of the channel in the CMT and don't match the channel numbers in the +datasheets. + +Required Properties: + + - compatible: must contain one of the following. + - "renesas,cmt-32" for the 32-bit CMT + (CMT0 on sh7372, sh73a0 and r8a7740) + - "renesas,cmt-32-fast" for the 32-bit CMT with fast clock support + (CMT[234] on sh7372, sh73a0 and r8a7740) + - "renesas,cmt-48" for the 48-bit CMT + (CMT1 on sh7372, sh73a0 and r8a7740) + - "renesas,cmt-48-gen2" for the second generation 48-bit CMT + (CMT[01] on r8a73a4, r8a7790 and r8a7791) + + - reg: base address and length of the registers block for the timer module. + - interrupts: interrupt-specifier for the timer, one per channel. + - clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. + - clock-names: must contain "fck" for the functional clock. + + - renesas,channels-mask: bitmask of the available channels. + + +Example: R8A7790 (R-Car H2) CMT0 node + + CMT0 on R8A7790 implements hardware channels 5 and 6 only and names + them channels 0 and 1 in the documentation. + + cmt0: timer@ffca0000 { + compatible = "renesas,cmt-48-gen2"; + reg = <0 0xffca0000 0 0x1004>; + interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>, + <0 142 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7790_CLK_CMT0>; + clock-names = "fck"; + + renesas,channels-mask = <0x60>; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,mtu2.txt b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt new file mode 100644 index 0000000000000000000000000000000000000000..917453f826bc42e6a3a8a9995c88b58dc77ef254 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,mtu2.txt @@ -0,0 +1,39 @@ +* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2) + +The MTU2 is a multi-purpose, multi-channel timer/counter with configurable +clock inputs and programmable compare match. + +Channels share hardware resources but their counter and compare match value +are independent. The MTU2 hardware supports five channels indexed from 0 to 4. + +Required Properties: + + - compatible: must contain "renesas,mtu2" + + - reg: base address and length of the registers block for the timer module. + + - interrupts: interrupt specifiers for the timer, one for each entry in + interrupt-names. + - interrupt-names: must contain one entry named "tgi?a" for each enabled + channel, where "?" is the channel index expressed as one digit from "0" to + "4". + + - clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. + - clock-names: must contain "fck" for the functional clock. + + +Example: R7S72100 (RZ/A1H) MTU2 node + + mtu2: timer@fcff0000 { + compatible = "renesas,mtu2"; + reg = <0xfcff0000 0x400>; + interrupts = <0 139 IRQ_TYPE_LEVEL_HIGH>, + <0 146 IRQ_TYPE_LEVEL_HIGH>, + <0 150 IRQ_TYPE_LEVEL_HIGH>, + <0 154 IRQ_TYPE_LEVEL_HIGH>, + <0 159 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "tgi0a", "tgi1a", "tgi2a", "tgi3a", "tgi4a"; + clocks = <&mstp3_clks R7S72100_CLK_MTU2>; + clock-names = "fck"; + }; diff --git a/Documentation/devicetree/bindings/timer/renesas,tmu.txt b/Documentation/devicetree/bindings/timer/renesas,tmu.txt new file mode 100644 index 0000000000000000000000000000000000000000..425d0c5f4aee4bee45b9f8c7063c8751120ac495 --- /dev/null +++ b/Documentation/devicetree/bindings/timer/renesas,tmu.txt @@ -0,0 +1,39 @@ +* Renesas R-Car Timer Unit (TMU) + +The TMU is a 32-bit timer/counter with configurable clock inputs and +programmable compare match. + +Channels share hardware resources but their counter and compare match value +are independent. The TMU hardware supports up to three channels. + +Required Properties: + + - compatible: must contain "renesas,tmu" + + - reg: base address and length of the registers block for the timer module. + + - interrupts: interrupt-specifier for the timer, one per channel. + + - clocks: a list of phandle + clock-specifier pairs, one for each entry + in clock-names. + - clock-names: must contain "fck" for the functional clock. + +Optional Properties: + + - #renesas,channels: number of channels implemented by the timer, must be 2 + or 3 (if not specified the value defaults to 3). + + +Example: R8A7779 (R-Car H1) TMU0 node + + tmu0: timer@ffd80000 { + compatible = "renesas,tmu"; + reg = <0xffd80000 0x30>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, + <0 33 IRQ_TYPE_LEVEL_HIGH>, + <0 34 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_TMU0>; + clock-names = "fck"; + + #renesas,channels = <3>; + }; diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt index a6a32cb7f7772469688a62258b677dd10c85a92f..1bae71e9ad47a535929a1f3f4bb6e64b9feb1734 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt @@ -4,6 +4,7 @@ Required properties: - compatible: Should be "fsl,imx27-usb" - reg: Should contain registers location and length - interrupts: Should contain controller interrupt +- fsl,usbphy: phandle of usb phy that connects to the port Recommended properies: - phy_type: the type of the phy connected to the core. Should be one @@ -12,7 +13,6 @@ Recommended properies: - dr_mode: One of "host", "peripheral" or "otg". Defaults to "otg" Optional properties: -- fsl,usbphy: phandler of usb phy that connects to the only one port - fsl,usbmisc: phandler of non-core register device, with one argument that indicate usb controller index - vbus-supply: regulator for vbus diff --git a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt index ba797d3e6326bc53a927cfa655c8cbad76db854e..c9205fbf26e22aade11aa802acfffc751feb2c94 100644 --- a/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt +++ b/Documentation/devicetree/bindings/usb/nvidia,tegra20-usb-phy.txt @@ -20,6 +20,12 @@ Required properties : Present if phy_type == utmi. - ulpi-link: The clock Tegra provides to the ULPI PHY (cdev2). Present if phy_type == ulpi, and ULPI link mode is in use. + - resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. + - reset-names : Must include the following entries: + - usb: The PHY's own reset signal. + - utmi-pads: The reset of the PHY containing the chip-wide UTMI pad control + registers. Required even if phy_type == ulpi. Required properties for phy_type == ulpi: - nvidia,phy-reset-gpio : The GPIO used to reset the PHY. @@ -56,6 +62,8 @@ Optional properties: host means this is a host controller peripheral means it is device controller otg means it can operate as either ("on the go") + - nvidia,has-utmi-pad-registers : boolean indicates whether this controller + contains the UTMI pad control registers common to all USB controllers. VBUS control (required for dr_mode == otg, optional for dr_mode == host): - vbus-supply: regulator for VBUS diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 5a79377c6a96191f75ddfb30df2b523ecec72a55..86f67f0886bc4ea577e2847a9a97289ab077b62d 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -9,8 +9,9 @@ Required properties: register set for the device. - interrupts: one XHCI interrupt should be described here. -Optional property: +Optional properties: - clocks: reference to a clock + - usb3-lpm-capable: determines if platform is USB3 LPM capable Example: usb@f0931000 { diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 46a311e728a86c713274ec1075e1f1fa82d4a472..ac7269f90764da1193f064dad2af7193398b5d8f 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -6,6 +6,7 @@ using them to avoid name-space collisions. abilis Abilis Systems active-semi Active-Semi International Inc ad Avionic Design GmbH +adapteva Adapteva, Inc. adi Analog Devices, Inc. aeroflexgaisler Aeroflex Gaisler AB ak Asahi Kasei Corp. @@ -42,6 +43,7 @@ dmo Data Modul AG ebv EBV Elektronik edt Emerging Display Technologies emmicro EM Microelectronic +epcos EPCOS AG epfl Ecole Polytechnique Fédérale de Lausanne epson Seiko Epson Corp. est ESTeem Wireless Modems @@ -71,12 +73,14 @@ karo Ka-Ro electronics GmbH keymile Keymile GmbH lacie LaCie lantiq Lantiq Semiconductor +lenovo Lenovo Group Ltd. lg LG Corporation linux Linux-specific binding lsi LSI Corp. (LSI Logic) lltc Linear Technology Corporation marvell Marvell Technology Group Ltd. maxim Maxim Integrated Products +mediatek MediaTek Inc. micrel Micrel Inc. microchip Microchip Technology Inc. mosaixtech Mosaix Technologies, Inc. @@ -99,6 +103,7 @@ panasonic Panasonic Corporation phytec PHYTEC Messtechnik GmbH picochip Picochip Ltd plathome Plat'Home Co., Ltd. +pixcir PIXCIR MICROELECTRONICS Co., Ltd powervr PowerVR (deprecated, use img) qca Qualcomm Atheros, Inc. qcom Qualcomm Technologies, Inc @@ -122,6 +127,7 @@ sii Seiko Instruments, Inc. sirf SiRF Technology, Inc. smsc Standard Microsystems Corporation snps Synopsys, Inc. +solidrun SolidRun spansion Spansion Inc. st STMicroelectronics ste ST-Ericsson diff --git a/Documentation/devicetree/bindings/video/arm,pl11x.txt b/Documentation/devicetree/bindings/video/arm,pl11x.txt new file mode 100644 index 0000000000000000000000000000000000000000..3e3039a8a2533d9b67b25b18849e827ac8e816af --- /dev/null +++ b/Documentation/devicetree/bindings/video/arm,pl11x.txt @@ -0,0 +1,109 @@ +* ARM PrimeCell Color LCD Controller PL110/PL111 + +See also Documentation/devicetree/bindings/arm/primecell.txt + +Required properties: + +- compatible: must be one of: + "arm,pl110", "arm,primecell" + "arm,pl111", "arm,primecell" + +- reg: base address and size of the control registers block + +- interrupt-names: either the single entry "combined" representing a + combined interrupt output (CLCDINTR), or the four entries + "mbe", "vcomp", "lnbu", "fuf" representing the individual + CLCDMBEINTR, CLCDVCOMPINTR, CLCDLNBUINTR, CLCDFUFINTR interrupts + +- interrupts: contains an interrupt specifier for each entry in + interrupt-names + +- clock-names: should contain "clcdclk" and "apb_pclk" + +- clocks: contains phandle and clock specifier pairs for the entries + in the clock-names property. See + Documentation/devicetree/binding/clock/clock-bindings.txt + +Optional properties: + +- memory-region: phandle to a node describing memory (see + Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt) + to be used for the framebuffer; if not present, the framebuffer + may be located anywhere in the memory + +- max-memory-bandwidth: maximum bandwidth in bytes per second that the + cell's memory interface can handle; if not present, the memory + interface is fast enough to handle all possible video modes + +Required sub-nodes: + +- port: describes LCD panel signals, following the common binding + for video transmitter interfaces; see + Documentation/devicetree/bindings/media/video-interfaces.txt; + when it is a TFT panel, the port's endpoint must define the + following property: + + - arm,pl11x,tft-r0g0b0-pads: an array of three 32-bit values, + defining the way CLD pads are wired up; first value + contains index of the "CLD" external pin (pad) used + as R0 (first bit of the red component), second value + index of the pad used as G0, third value index of the + pad used as B0, see also "LCD panel signal multiplexing + details" paragraphs in the PL110/PL111 Technical + Reference Manuals; this implicitly defines available + color modes, for example: + - PL111 TFT 4:4:4 panel: + arm,pl11x,tft-r0g0b0-pads = <4 15 20>; + - PL110 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <1 7 13>; + - PL111 TFT (1:)5:5:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 11 19>; + - PL111 TFT 5:6:5 panel: + arm,pl11x,tft-r0g0b0-pads = <3 10 19>; + - PL110 and PL111 TFT 8:8:8 panel: + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + - PL110 and PL111 TFT 8:8:8 panel, R & B components swapped: + arm,pl11x,tft-r0g0b0-pads = <16 8 0>; + + +Example: + + clcd@10020000 { + compatible = "arm,pl111", "arm,primecell"; + reg = <0x10020000 0x1000>; + interrupt-names = "combined"; + interrupts = <0 44 4>; + clocks = <&oscclk1>, <&oscclk2>; + clock-names = "clcdclk", "apb_pclk"; + max-memory-bandwidth = <94371840>; /* Bps, 1024x768@60 16bpp */ + + port { + clcd_pads: endpoint { + remote-endpoint = <&clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <0 8 16>; + }; + }; + + }; + + panel { + compatible = "panel-dpi"; + + port { + clcd_panel: endpoint { + remote-endpoint = <&clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <25175000>; + hactive = <640>; + hback-porch = <40>; + hfront-porch = <24>; + hsync-len = <96>; + vactive = <480>; + vback-porch = <32>; + vfront-porch = <11>; + vsync-len = <2>; + }; + }; diff --git a/Documentation/devicetree/bindings/video/atmel,lcdc.txt b/Documentation/devicetree/bindings/video/atmel,lcdc.txt index 1ec175eddca8f010f2dc6551eb87bb635f212698..b75af94a5e52c5a100470e1c0a98e093085f1fcd 100644 --- a/Documentation/devicetree/bindings/video/atmel,lcdc.txt +++ b/Documentation/devicetree/bindings/video/atmel,lcdc.txt @@ -46,6 +46,7 @@ Required properties (as per of_videomode_helper): Optional properties (as per of_videomode_helper): - atmel,lcdcon-backlight: enable backlight + - atmel,lcdcon-backlight-inverted: invert backlight PWM polarity - atmel,lcd-wiring-mode: lcd wiring mode "RGB" or "BRG" - atmel,power-control-gpio: gpio to power on or off the LCD (as many as needed) diff --git a/Documentation/devicetree/bindings/video/cirrus,clps711x-fb.txt b/Documentation/devicetree/bindings/video/cirrus,clps711x-fb.txt new file mode 100644 index 0000000000000000000000000000000000000000..6fc3c6adeefae797daaddc6b74c26a7e9eca7247 --- /dev/null +++ b/Documentation/devicetree/bindings/video/cirrus,clps711x-fb.txt @@ -0,0 +1,47 @@ +* Currus Logic CLPS711X Framebuffer + +Required properties: +- compatible: Shall contain "cirrus,clps711x-fb". +- reg : Physical base address and length of the controller's registers + + location and size of the framebuffer memory. +- clocks : phandle + clock specifier pair of the FB reference clock. +- display : phandle to a display node as described in + Documentation/devicetree/bindings/video/display-timing.txt. + Additionally, the display node has to define properties: + - bits-per-pixel: Bits per pixel. + - ac-prescale : LCD AC bias frequency. This frequency is the required + AC bias frequency for a given manufacturer's LCD plate. + - cmap-invert : Invert the color levels (Optional). + +Optional properties: +- lcd-supply: Regulator for LCD supply voltage. + +Example: + fb: fb@800002c0 { + compatible = "cirrus,ep7312-fb", "cirrus,clps711x-fb"; + reg = <0x800002c0 0xd44>, <0x60000000 0xc000>; + clocks = <&clks 2>; + lcd-supply = <®5v0>; + display = <&display>; + }; + + display: display { + model = "320x240x4"; + native-mode = <&timing0>; + bits-per-pixel = <4>; + ac-prescale = <17>; + + display-timings { + timing0: 320x240 { + hactive = <320>; + hback-porch = <0>; + hfront-porch = <0>; + hsync-len = <0>; + vactive = <240>; + vback-porch = <0>; + vfront-porch = <0>; + vsync-len = <0>; + clock-frequency = <6500000>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/video/exynos_dsim.txt b/Documentation/devicetree/bindings/video/exynos_dsim.txt index 33b5730d07bac80403041f2482d06b5d17767ebc..31036c667d541a8057111915afc5b6c7eb0d6e9f 100644 --- a/Documentation/devicetree/bindings/video/exynos_dsim.txt +++ b/Documentation/devicetree/bindings/video/exynos_dsim.txt @@ -1,7 +1,9 @@ Exynos MIPI DSI Master Required properties: - - compatible: "samsung,exynos4210-mipi-dsi" + - compatible: value should be one of the following + "samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */ + "samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */ - reg: physical base address and length of the registers set for the device - interrupts: should contain DSI interrupt - clocks: list of clock specifiers, must contain an entry for each required diff --git a/Documentation/devicetree/bindings/video/exynos_mixer.txt b/Documentation/devicetree/bindings/video/exynos_mixer.txt index 7bfde9c9d658d780e82452d52d3fa5cfa3e36919..08b394b1edbfff3e3857108ebe70c1b7f5c356d1 100644 --- a/Documentation/devicetree/bindings/video/exynos_mixer.txt +++ b/Documentation/devicetree/bindings/video/exynos_mixer.txt @@ -4,8 +4,9 @@ Required properties: - compatible: value should be one of the following: 1) "samsung,exynos5-mixer" 2) "samsung,exynos4210-mixer" - 3) "samsung,exynos5250-mixer" - 4) "samsung,exynos5420-mixer" + 3) "samsung,exynos4212-mixer" + 4) "samsung,exynos5250-mixer" + 5) "samsung,exynos5420-mixer" - reg: physical base address of the mixer and length of memory mapped region. diff --git a/Documentation/devicetree/bindings/video/samsung-fimd.txt b/Documentation/devicetree/bindings/video/samsung-fimd.txt index 2dad41b689af7a41b02cab8b3498395523b4a5fb..ecc899b9817b23718a2e321ed58bc6a28209a750 100644 --- a/Documentation/devicetree/bindings/video/samsung-fimd.txt +++ b/Documentation/devicetree/bindings/video/samsung-fimd.txt @@ -8,8 +8,6 @@ Required properties: - compatible: value should be one of the following "samsung,s3c2443-fimd"; /* for S3C24XX SoCs */ "samsung,s3c6400-fimd"; /* for S3C64XX SoCs */ - "samsung,s5p6440-fimd"; /* for S5P64X0 SoCs */ - "samsung,s5pc100-fimd"; /* for S5PC100 SoC */ "samsung,s5pv210-fimd"; /* for S5PV210 SoC */ "samsung,exynos4210-fimd"; /* for Exynos4 SoCs */ "samsung,exynos5250-fimd"; /* for Exynos5 SoCs */ @@ -44,6 +42,34 @@ Optional Properties: - display-timings: timing settings for FIMD, as described in document [1]. Can be used in case timings cannot be provided otherwise or to override timings provided by the panel. +- samsung,sysreg: handle to syscon used to control the system registers +- i80-if-timings: timing configuration for lcd i80 interface support. + - cs-setup: clock cycles for the active period of address signal is enabled + until chip select is enabled. + If not specified, the default value(0) will be used. + - wr-setup: clock cycles for the active period of CS signal is enabled until + write signal is enabled. + If not specified, the default value(0) will be used. + - wr-active: clock cycles for the active period of CS is enabled. + If not specified, the default value(1) will be used. + - wr-hold: clock cycles for the active period of CS is disabled until write + signal is disabled. + If not specified, the default value(0) will be used. + + The parameters are defined as: + + VCLK(internal) __|??????|_____|??????|_____|??????|_____|??????|_____|?? + : : : : : + Address Output --:| : : : + Chip Select ???????????????|____________:____________:____________|?? + | wr-setup+1 | | wr-hold+1 | + |<---------->| |<---------->| + Write Enable ????????????????????????????|____________|??????????????? + | wr-active+1| + |<---------->| + Video Data ------------------------------ The device node can contain 'port' child nodes according to the bindings defined in [2]. The following are properties specific to those nodes: diff --git a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt index 2144af1a5264dfd42c956522af88ce926129e81a..e52ba2da868ce120daf7348aa15cdda02fcc34af 100644 --- a/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt +++ b/Documentation/devicetree/bindings/watchdog/fsl-imx-wdt.txt @@ -5,10 +5,15 @@ Required properties: - reg : Should contain WDT registers location and length - interrupts : Should contain WDT interrupt +Optional property: +- big-endian: If present the watchdog device's registers are implemented + in big endian mode, otherwise in little mode. + Examples: wdt@73f98000 { compatible = "fsl,imx51-wdt", "fsl,imx21-wdt"; reg = <0x73f98000 0x4000>; interrupts = <58>; + big-endian; }; diff --git a/Documentation/devicetree/changesets.txt b/Documentation/devicetree/changesets.txt new file mode 100644 index 0000000000000000000000000000000000000000..935ba5acc34e6c41b1ba630dd252f9e98c11559c --- /dev/null +++ b/Documentation/devicetree/changesets.txt @@ -0,0 +1,40 @@ +A DT changeset is a method which allows one to apply changes +in the live tree in such a way that either the full set of changes +will be applied, or none of them will be. If an error occurs partway +through applying the changeset, then the tree will be rolled back to the +previous state. A changeset can also be removed after it has been +applied. + +When a changeset is applied, all of the changes get applied to the tree +at once before emitting OF_RECONFIG notifiers. This is so that the +receiver sees a complete and consistent state of the tree when it +receives the notifier. + +The sequence of a changeset is as follows. + +1. of_changeset_init() - initializes a changeset + +2. A number of DT tree change calls, of_changeset_attach_node(), +of_changeset_detach_node(), of_changeset_add_property(), +of_changeset_remove_property, of_changeset_update_property() to prepare +a set of changes. No changes to the active tree are made at this point. +All the change operations are recorded in the of_changeset 'entries' +list. + +3. mutex_lock(of_mutex) - starts a changeset; The global of_mutex +ensures there can only be one editor at a time. + +4. of_changeset_apply() - Apply the changes to the tree. Either the +entire changeset will get applied, or if there is an error the tree will +be restored to the previous state + +5. mutex_unlock(of_mutex) - All operations complete, release the mutex + +If a successfully applied changeset needs to be removed, it can be done +with the following sequence. + +1. mutex_lock(of_mutex) + +2. of_changeset_revert() + +3. mutex_unlock(of_mutex) diff --git a/Documentation/devicetree/todo.txt b/Documentation/devicetree/todo.txt new file mode 100644 index 0000000000000000000000000000000000000000..c3cf0659bd19e86969ee427dcdbb286ae423cfad --- /dev/null +++ b/Documentation/devicetree/todo.txt @@ -0,0 +1,11 @@ +Todo list for devicetree: + +=== General structure === +- Switch from custom lists to (h)list_head for nodes and properties structure +- Remove of_allnodes list and iterate using list of child nodes alone + +=== CONFIG_OF_DYNAMIC === +- Switch to RCU for tree updates and get rid of global spinlock +- Document node lifecycle for CONFIG_OF_DYNAMIC +- Always set ->full_name at of_attach_node() time +- pseries: Get rid of open-coded tree modification from arch/powerpc/platforms/pseries/dlpar.c diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt index 879b6e31e2da6b4992d9ec5c556c741089851fff..573e28ce97513c872ff80d870b5471c7e3181028 100644 --- a/Documentation/dmaengine.txt +++ b/Documentation/dmaengine.txt @@ -84,31 +84,32 @@ The slave DMA usage consists of following steps: the given transaction. Interface: - struct dma_async_tx_descriptor *(*chan->device->device_prep_slave_sg)( + struct dma_async_tx_descriptor *dmaengine_prep_slave_sg( struct dma_chan *chan, struct scatterlist *sgl, unsigned int sg_len, enum dma_data_direction direction, unsigned long flags); - struct dma_async_tx_descriptor *(*chan->device->device_prep_dma_cyclic)( + struct dma_async_tx_descriptor *dmaengine_prep_dma_cyclic( struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len, size_t period_len, enum dma_data_direction direction); - struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)( + struct dma_async_tx_descriptor *dmaengine_prep_interleaved_dma( struct dma_chan *chan, struct dma_interleaved_template *xt, unsigned long flags); The peripheral driver is expected to have mapped the scatterlist for the DMA operation prior to calling device_prep_slave_sg, and must keep the scatterlist mapped until the DMA operation has completed. - The scatterlist must be mapped using the DMA struct device. So, - normal setup should look like this: + The scatterlist must be mapped using the DMA struct device. + If a mapping needs to be synchronized later, dma_sync_*_for_*() must be + called using the DMA struct device, too. + So, normal setup should look like this: nr_sg = dma_map_sg(chan->device->dev, sgl, sg_len); if (nr_sg == 0) /* error */ - desc = chan->device->device_prep_slave_sg(chan, sgl, nr_sg, - direction, flags); + desc = dmaengine_prep_slave_sg(chan, sgl, nr_sg, direction, flags); Once a descriptor has been obtained, the callback information can be added and the descriptor must then be submitted. Some DMA engine @@ -188,7 +189,7 @@ Further APIs: description of this API. This can be used in conjunction with dma_async_is_complete() and - the cookie returned from 'descriptor->submit()' to check for + the cookie returned from dmaengine_submit() to check for completion of a specific DMA transaction. Note: diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 1525e30483fda44188d22b22548dd5d3068fe8e6..d14710b044395fad64babfdaf42b5a9ee99db2bf 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -233,66 +233,78 @@ certainly invest a bit more effort into libata core layer). 6. List of managed interfaces ----------------------------- -MEM - devm_kzalloc() - devm_kfree() - devm_kmemdup() - devm_get_free_pages() - devm_free_pages() +CLOCK + devm_clk_get() + devm_clk_put() + +DMA + dmam_alloc_coherent() + dmam_alloc_noncoherent() + dmam_declare_coherent_memory() + dmam_free_coherent() + dmam_free_noncoherent() + dmam_pool_create() + dmam_pool_destroy() + +GPIO + devm_gpiod_get() + devm_gpiod_get_index() + devm_gpiod_get_index_optional() + devm_gpiod_get_optional() + devm_gpiod_put() IIO devm_iio_device_alloc() devm_iio_device_free() - devm_iio_trigger_alloc() - devm_iio_trigger_free() devm_iio_device_register() devm_iio_device_unregister() + devm_iio_trigger_alloc() + devm_iio_trigger_free() IO region - devm_request_region() - devm_request_mem_region() - devm_release_region() devm_release_mem_region() - -IRQ - devm_request_irq() - devm_free_irq() - -DMA - dmam_alloc_coherent() - dmam_free_coherent() - dmam_alloc_noncoherent() - dmam_free_noncoherent() - dmam_declare_coherent_memory() - dmam_pool_create() - dmam_pool_destroy() - -PCI - pcim_enable_device() : after success, all PCI ops become managed - pcim_pin_device() : keep PCI device enabled after release + devm_release_region() + devm_request_mem_region() + devm_request_region() IOMAP devm_ioport_map() devm_ioport_unmap() devm_ioremap() devm_ioremap_nocache() - devm_iounmap() devm_ioremap_resource() : checks resource, requests memory region, ioremaps - devm_request_and_ioremap() : obsoleted by devm_ioremap_resource() + devm_iounmap() pcim_iomap() - pcim_iounmap() - pcim_iomap_table() : array of mapped addresses indexed by BAR pcim_iomap_regions() : do request_region() and iomap() on multiple BARs + pcim_iomap_table() : array of mapped addresses indexed by BAR + pcim_iounmap() -REGULATOR - devm_regulator_get() - devm_regulator_put() - devm_regulator_bulk_get() - devm_regulator_register() +IRQ + devm_free_irq() + devm_request_irq() -CLOCK - devm_clk_get() - devm_clk_put() +MDIO + devm_mdiobus_alloc() + devm_mdiobus_alloc_size() + devm_mdiobus_free() + +MEM + devm_free_pages() + devm_get_free_pages() + devm_kcalloc() + devm_kfree() + devm_kmalloc() + devm_kmalloc_array() + devm_kmemdup() + devm_kzalloc() + +PCI + pcim_enable_device() : after success, all PCI ops become managed + pcim_pin_device() : keep PCI device enabled after release + +PHY + devm_usb_get_phy() + devm_usb_put_phy() PINCTRL devm_pinctrl_get() @@ -302,24 +314,14 @@ PWM devm_pwm_get() devm_pwm_put() -PHY - devm_usb_get_phy() - devm_usb_put_phy() +REGULATOR + devm_regulator_bulk_get() + devm_regulator_get() + devm_regulator_put() + devm_regulator_register() SLAVE DMA ENGINE devm_acpi_dma_controller_register() SPI devm_spi_register_master() - -GPIO - devm_gpiod_get() - devm_gpiod_get_index() - devm_gpiod_get_optional() - devm_gpiod_get_index_optional() - devm_gpiod_put() - -MDIO - devm_mdiobus_alloc() - devm_mdiobus_alloc_size() - devm_mdiobus_free() diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index d91b8be80b66ebb8cbeabc4822a0a91dccf325eb..26c623dd3aa34699561a5cbbeeab4592ff161e97 100755 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -29,7 +29,7 @@ use IO::Handle; "af9015", "ngene", "az6027", "lme2510_lg", "lme2510c_s7395", "lme2510c_s7395_old", "drxk", "drxk_terratec_h5", "drxk_hauppauge_hvr930c", "tda10071", "it9135", "drxk_pctv", - "drxk_terratec_htc_stick", "sms1xxx_hcw"); + "drxk_terratec_htc_stick", "sms1xxx_hcw", "si2165"); # Check args syntax() if (scalar(@ARGV) != 1); @@ -783,6 +783,37 @@ sub sms1xxx_hcw { $allfiles; } +sub si2165 { + my $sourcefile = "model_111xxx_122xxx_driver_6_0_119_31191_WHQL.zip"; + my $url = "http://www.hauppauge.de/files/drivers/"; + my $hash = "76633e7c76b0edee47c3ba18ded99336"; + my $fwfile = "dvb-demod-si2165.fw"; + my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); + + checkstandard(); + + wgetfile($sourcefile, $url . $sourcefile); + verify($sourcefile, $hash); + unzip($sourcefile, $tmpdir); + extract("$tmpdir/Driver10/Hcw10bda.sys", 0x80788, 0x81E08-0x80788, "$tmpdir/fw1"); + + delzero("$tmpdir/fw1","$tmpdir/fw1-1"); + #verify("$tmpdir/fw1","5e0909858fdf0b5b09ad48b9fe622e70"); + + my $CRC="\x0A\xCC"; + my $BLOCKS_MAIN="\x27"; + open FW,">$fwfile"; + print FW "\x01\x00"; # just a version id for the driver itself + print FW "\x9A"; # fw version + print FW "\x00"; # padding + print FW "$BLOCKS_MAIN"; # number of blocks of main part + print FW "\x00"; # padding + print FW "$CRC"; # 16bit crc value of main part + appendfile(FW,"$tmpdir/fw1"); + + "$fwfile"; +} + # --------------------------------------------------------------- # Utilities diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking index b18dd17790299de1b01053117a065af1ed7f251f..f1997e9da61f1cb2fbb122b610c648c537520185 100644 --- a/Documentation/filesystems/Locking +++ b/Documentation/filesystems/Locking @@ -349,7 +349,11 @@ prototypes: locking rules: inode->i_lock may block fl_copy_lock: yes no -fl_release_private: maybe no +fl_release_private: maybe maybe[1] + +[1]: ->fl_release_private for flock or POSIX locks is currently allowed +to block. Leases however can still be freed while the i_lock is held and +so fl_release_private called on a lease should not block. ----------------------- lock_manager_operations --------------------------- prototypes: diff --git a/Documentation/filesystems/cifs/AUTHORS b/Documentation/filesystems/cifs/AUTHORS index ca4a67a0bb1eb9d8deaa25717fd5b5ac77e5c2c7..c98800df677fef0e18103415af6a0333e8c6a10a 100644 --- a/Documentation/filesystems/cifs/AUTHORS +++ b/Documentation/filesystems/cifs/AUTHORS @@ -40,6 +40,7 @@ Gunter Kukkukk (testing and suggestions for support of old servers) Igor Mammedov (DFS support) Jeff Layton (many, many fixes, as well as great work on the cifs Kerberos code) Scott Lovenberg +Pavel Shilovsky (for great work adding SMB2 support, and various SMB3 features) Test case and Bug Report contributors ------------------------------------- diff --git a/Documentation/filesystems/cifs/TODO b/Documentation/filesystems/cifs/TODO index 355abcdcda980acfcd70dcb54d4bb798edf6fcae..066ffddc3964917d75287198ffd178daacc1cac6 100644 --- a/Documentation/filesystems/cifs/TODO +++ b/Documentation/filesystems/cifs/TODO @@ -1,4 +1,4 @@ -Version 1.53 May 20, 2008 +Version 2.03 August 1, 2014 A Partial List of Missing Features ================================== @@ -7,63 +7,49 @@ Contributions are welcome. There are plenty of opportunities for visible, important contributions to this module. Here is a partial list of the known problems and missing features: -a) Support for SecurityDescriptors(Windows/CIFS ACLs) for chmod/chgrp/chown -so that these operations can be supported to Windows servers +a) SMB3 (and SMB3.02) missing optional features: + - RDMA + - multichannel (started) + - directory leases (improved metadata caching) + - T10 copy offload (copy chunk is only mechanism supported) + - encrypted shares -b) Mapping POSIX ACLs (and eventually NFSv4 ACLs) to CIFS -SecurityDescriptors +b) improved sparse file support -c) Better pam/winbind integration (e.g. to handle uid mapping -better) - -d) Cleanup now unneeded SessSetup code in -fs/cifs/connect.c and add back in NTLMSSP code if any servers -need it - -e) fix NTLMv2 signing when two mounts with different users to same -server. - -f) Directory entry caching relies on a 1 second timer, rather than +c) Directory entry caching relies on a 1 second timer, rather than using FindNotify or equivalent. - (started) -g) quota support (needs minor kernel change since quota calls +d) quota support (needs minor kernel change since quota calls to make it to network filesystems or deviceless filesystems) -h) investigate sync behavior (including syncpage) and check -for proper behavior of intr/nointr - -i) improve support for very old servers (OS/2 and Win9x for example) +e) improve support for very old servers (OS/2 and Win9x for example) Including support for changing the time remotely (utimes command). -j) hook lower into the sockets api (as NFS/SunRPC does) to avoid the +f) hook lower into the sockets api (as NFS/SunRPC does) to avoid the extra copy in/out of the socket buffers in some cases. -k) Better optimize open (and pathbased setfilesize) to reduce the +g) Better optimize open (and pathbased setfilesize) to reduce the oplock breaks coming from windows srv. Piggyback identical file opens on top of each other by incrementing reference count rather than resending (helps reduce server resource utilization and avoid spurious oplock breaks). -l) Improve performance of readpages by sending more than one read -at a time when 8 pages or more are requested. In conjuntion -add support for async_cifs_readpages. - -m) Add support for storing symlink info to Windows servers +h) Add support for storing symlink info to Windows servers in the Extended Attribute format their SFU clients would recognize. -n) Finish fcntl D_NOTIFY support so kde and gnome file list windows +i) Finish inotify support so kde and gnome file list windows will autorefresh (partially complete by Asser). Needs minor kernel vfs change to support removing D_NOTIFY on a file. -o) Add GUI tool to configure /proc/fs/cifs settings and for display of +j) Add GUI tool to configure /proc/fs/cifs settings and for display of the CIFS statistics (started) -p) implement support for security and trusted categories of xattrs +k) implement support for security and trusted categories of xattrs (requires minor protocol extension) to enable better support for SELINUX -q) Implement O_DIRECT flag on open (already supported on mount) +l) Implement O_DIRECT flag on open (already supported on mount) -r) Create UID mapping facility so server UIDs can be mapped on a per +m) Create UID mapping facility so server UIDs can be mapped on a per mount or a per server basis to client UIDs or nobody if no mapping exists. This is helpful when Unix extensions are negotiated to allow better permission checking when UIDs differ on the server @@ -71,28 +57,29 @@ and client. Add new protocol request to the CIFS protocol standard for asking the server for the corresponding name of a particular uid. -s) Add support for CIFS Unix and also the newer POSIX extensions to the -server side for Samba 4. +n) DOS attrs - returned as pseudo-xattr in Samba format (check VFAT and NTFS for this too) + +o) mount check for unmatched uids -t) In support for OS/2 (LANMAN 1.2 and LANMAN2.1 based SMB servers) -need to add ability to set time to server (utimes command) +p) Add support for new vfs entry point for fallocate -u) DOS attrs - returned as pseudo-xattr in Samba format (check VFAT and NTFS for this too) +q) Add tools to take advantage of cifs/smb3 specific ioctls and features +such as "CopyChunk" (fast server side file copy) -v) mount check for unmatched uids +r) encrypted file support -w) Add support for new vfs entry point for fallocate +s) improved stats gathering, tools (perhaps integration with nfsometer?) -x) Fix Samba 3 server to handle Linux kernel aio so dbench with lots of -processes can proceed better in parallel (on the server) +t) allow setting more NTFS/SMB3 file attributes remotely (currently limited to compressed +file attribute via chflags) -y) Fix Samba 3 to handle reads/writes over 127K (and remove the cifs mount -restriction of wsize max being 127K) +u) mount helper GUI (to simplify the various configuration options on mount) -KNOWN BUGS (updated April 24, 2007) + +KNOWN BUGS ==================================== See http://bugzilla.samba.org - search on product "CifsVFS" for -current bug list. +current bug list. Also check http://bugzilla.kernel.org (Product = File System, Component = CIFS) 1) existing symbolic links (Windows reparse points) are recognized but can not be created remotely. They are implemented for Samba and those that @@ -100,30 +87,18 @@ support the CIFS Unix extensions, although earlier versions of Samba overly restrict the pathnames. 2) follow_link and readdir code does not follow dfs junctions but recognizes them -3) create of new files to FAT partitions on Windows servers can -succeed but still return access denied (appears to be Windows -server not cifs client problem) and has not been reproduced recently. -NTFS partitions do not have this problem. -4) Unix/POSIX capabilities are reset after reconnection, and affect -a few fields in the tree connection but we do do not know which -superblocks to apply these changes to. We should probably walk -the list of superblocks to set these. Also need to check the -flags on the second mount to the same share, and see if we -can do the same trick that NFS does to remount duplicate shares. Misc testing to do ================== 1) check out max path names and max path name components against various server types. Try nested symlinks (8 deep). Return max path name in stat -f information -2) Modify file portion of ltp so it can run against a mounted network -share and run it against cifs vfs in automated fashion. +2) Improve xfstest's cifs enablement and adapt xfstests where needed to test +cifs better 3) Additional performance testing and optimization using iozone and similar - there are some easy changes that can be done to parallelize sequential writes, and when signing is disabled to request larger read sizes (larger than negotiated size) and send larger write sizes to modern servers. -4) More exhaustively test against less common servers. More testing -against Windows 9x, Windows ME servers. - +4) More exhaustively test against less common servers diff --git a/Documentation/filesystems/f2fs.txt b/Documentation/filesystems/f2fs.txt index 51afba17bbae89f433da7d150085df937c071c3c..a2046a7d0a9d6319c5be0c59d9ffea461ad9f53f 100644 --- a/Documentation/filesystems/f2fs.txt +++ b/Documentation/filesystems/f2fs.txt @@ -126,6 +126,11 @@ flush_merge Merge concurrent cache_flush commands as much as possible to eliminate redundant command issues. If the underlying device handles the cache_flush command relatively slowly, recommend to enable this option. +nobarrier This option can be used if underlying storage guarantees + its cached data should be written to the novolatile area. + If this option is set, no cache_flush commands are issued + but f2fs still guarantees the write ordering of all the + data writes. ================================================================================ DEBUGFS ENTRIES diff --git a/Documentation/filesystems/nfs/Exporting b/Documentation/filesystems/nfs/Exporting index e543b1a619cc95b022f97d3c516687fc98f43735..c8f036a9b13fcf5d1c87761de5a97ba1248d2fee 100644 --- a/Documentation/filesystems/nfs/Exporting +++ b/Documentation/filesystems/nfs/Exporting @@ -66,23 +66,31 @@ b/ A per-superblock list "s_anon" of dentries which are the roots of c/ Helper routines to allocate anonymous dentries, and to help attach loose directory dentries at lookup time. They are: - d_alloc_anon(inode) will return a dentry for the given inode. + d_obtain_alias(inode) will return a dentry for the given inode. If the inode already has a dentry, one of those is returned. If it doesn't, a new anonymous (IS_ROOT and DCACHE_DISCONNECTED) dentry is allocated and attached. In the case of a directory, care is taken that only one dentry can ever be attached. - d_splice_alias(inode, dentry) will make sure that there is a - dentry with the same name and parent as the given dentry, and - which refers to the given inode. - If the inode is a directory and already has a dentry, then that - dentry is d_moved over the given dentry. - If the passed dentry gets attached, care is taken that this is - mutually exclusive to a d_alloc_anon operation. - If the passed dentry is used, NULL is returned, else the used - dentry is returned. This corresponds to the calling pattern of - ->lookup. - + d_splice_alias(inode, dentry) or d_materialise_unique(dentry, inode) + will introduce a new dentry into the tree; either the passed-in + dentry or a preexisting alias for the given inode (such as an + anonymous one created by d_obtain_alias), if appropriate. The two + functions differ in their handling of directories with preexisting + aliases: + d_splice_alias will use any existing IS_ROOT dentry, but it will + return -EIO rather than try to move a dentry with a different + parent. This is appropriate for local filesystems, which + should never see such an alias unless the filesystem is + corrupted somehow (for example, if two on-disk directory + entries refer to the same directory.) + d_materialise_unique will attempt to move any dentry. This is + appropriate for distributed filesystems, where finding a + directory other than where we last cached it may be a normal + consequence of concurrent operations on other hosts. + Both functions return NULL when the passed-in dentry is used, + following the calling convention of ->lookup. + Filesystem Issues ----------------- @@ -120,12 +128,12 @@ struct which has the following members: fh_to_dentry (mandatory) Given a filehandle fragment, this should find the implied object and - create a dentry for it (possibly with d_alloc_anon). + create a dentry for it (possibly with d_obtain_alias). fh_to_parent (optional but strongly recommended) Given a filehandle fragment, this should find the parent of the - implied object and create a dentry for it (possibly with d_alloc_anon). - May fail if the filehandle fragment is too small. + implied object and create a dentry for it (possibly with + d_obtain_alias). May fail if the filehandle fragment is too small. get_parent (optional but strongly recommended) When given a dentry for a directory, this should return a dentry for diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index ddc531a74d04970810485e2cd5c2d4ba1cb74435..eb8a10e22f7c7ade01554922d8480b4feedfe60d 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -1743,6 +1743,25 @@ pair provide additional information particular to the objects they represent. While the first three lines are mandatory and always printed, the rest is optional and may be omitted if no marks created yet. + Timerfd files + ~~~~~~~~~~~~~ + + pos: 0 + flags: 02 + mnt_id: 9 + clockid: 0 + ticks: 0 + settime flags: 01 + it_value: (0, 49406829) + it_interval: (1, 0) + + where 'clockid' is the clock type and 'ticks' is the number of the timer expirations + that have occurred [see timerfd_create(2) for details]. 'settime flags' are + flags in octal form been used to setup the timer [see timerfd_settime(2) for + details]. 'it_value' is remaining time until the timer exiration. + 'it_interval' is the interval for the timer. Note the timer might be set up + with TIMER_ABSTIME option which will be shown in 'settime flags', but 'it_value' + still exhibits timer's remaining time. ------------------------------------------------------------------------------ Configuring procfs diff --git a/Documentation/filesystems/vfs.txt b/Documentation/filesystems/vfs.txt index a1d0d7a301657d674c653648534ee5be527919b9..61d65cc65c54a333bef994fc49f881ece37032c5 100644 --- a/Documentation/filesystems/vfs.txt +++ b/Documentation/filesystems/vfs.txt @@ -1053,7 +1053,8 @@ struct dentry_operations { If the 'rcu_walk' parameter is true, then the caller is doing a pathwalk in RCU-walk mode. Sleeping is not permitted in this mode, and the caller can be asked to leave it and call again by returning - -ECHILD. + -ECHILD. -EISDIR may also be returned to tell pathwalk to + ignore d_automount or any mounts. This function is only used if DCACHE_MANAGE_TRANSIT is set on the dentry being transited from. diff --git a/Documentation/firmware_class/README b/Documentation/firmware_class/README index 43fada989e65f2b27111c1b3fb7190ef81092014..71f86859d7d849f2db779fc2dd09ce1a85cc4ac7 100644 --- a/Documentation/firmware_class/README +++ b/Documentation/firmware_class/README @@ -64,7 +64,7 @@ if(request_firmware(&fw_entry, $FIRMWARE, device) == 0) copy_fw_to_device(fw_entry->data, fw_entry->size); - release(fw_entry); + release_firmware(fw_entry); Sample/simple hotplug script: ============================ @@ -74,7 +74,7 @@ HOTPLUG_FW_DIR=/usr/lib/hotplug/firmware/ echo 1 > /sys/$DEVPATH/loading - cat $HOTPLUG_FW_DIR/$FIRMWARE > /sysfs/$DEVPATH/data + cat $HOTPLUG_FW_DIR/$FIRMWARE > /sys/$DEVPATH/data echo 0 > /sys/$DEVPATH/loading Random notes: @@ -123,6 +123,6 @@ -------------------- After firmware cache mechanism is introduced during system sleep, request_firmware can be called safely inside device's suspend and - resume callback, and callers need't cache the firmware by + resume callback, and callers needn't cache the firmware by themselves any more for dealing with firmware loss during system resume. diff --git a/Documentation/gpio/board.txt b/Documentation/gpio/board.txt index ba169faad5c63b1d969262b61e8b59aad72881c2..4452786225b8d20a8de736dbd71c972e43b5d7b1 100644 --- a/Documentation/gpio/board.txt +++ b/Documentation/gpio/board.txt @@ -60,7 +60,7 @@ Platform Data Finally, GPIOs can be bound to devices and functions using platform data. Board files that desire to do so need to include the following header: - #include + #include GPIOs are mapped by the means of tables of lookups, containing instances of the gpiod_lookup structure. Two macros are defined to help declaring such mappings: diff --git a/Documentation/gpio/consumer.txt b/Documentation/gpio/consumer.txt index d8abfc31abbebf136bccee55174a8321f7c92ba3..76546324e968cf70394144beb86817c16586ceb3 100644 --- a/Documentation/gpio/consumer.txt +++ b/Documentation/gpio/consumer.txt @@ -29,13 +29,24 @@ gpiod_get() functions. Like many other kernel subsystems, gpiod_get() takes the device that will use the GPIO and the function the requested GPIO is supposed to fulfill: - struct gpio_desc *gpiod_get(struct device *dev, const char *con_id) + struct gpio_desc *gpiod_get(struct device *dev, const char *con_id, + enum gpiod_flags flags) If a function is implemented by using several GPIOs together (e.g. a simple LED device that displays digits), an additional index argument can be specified: struct gpio_desc *gpiod_get_index(struct device *dev, - const char *con_id, unsigned int idx) + const char *con_id, unsigned int idx, + enum gpiod_flags flags) + +The flags parameter is used to optionally specify a direction and initial value +for the GPIO. Values can be: + +* GPIOD_ASIS or 0 to not initialize the GPIO at all. The direction must be set + later with one of the dedicated functions. +* GPIOD_IN to initialize the GPIO as input. +* GPIOD_OUT_LOW to initialize the GPIO as output with a value of 0. +* GPIOD_OUT_HIGH to initialize the GPIO as output with a value of 1. Both functions return either a valid GPIO descriptor, or an error code checkable with IS_ERR() (they will never return a NULL pointer). -ENOENT will be returned @@ -46,11 +57,13 @@ errors and an absence of GPIO for optional GPIO parameters. Device-managed variants of these functions are also defined: - struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id) + struct gpio_desc *devm_gpiod_get(struct device *dev, const char *con_id, + enum gpiod_flags flags) struct gpio_desc *devm_gpiod_get_index(struct device *dev, const char *con_id, - unsigned int idx) + unsigned int idx, + enum gpiod_flags flags) A GPIO descriptor can be disposed of using the gpiod_put() function: @@ -67,8 +80,9 @@ Using GPIOs Setting Direction ----------------- -The first thing a driver must do with a GPIO is setting its direction. This is -done by invoking one of the gpiod_direction_*() functions: +The first thing a driver must do with a GPIO is setting its direction. If no +direction-setting flags have been given to gpiod_get*(), this is done by +invoking one of the gpiod_direction_*() functions: int gpiod_direction_input(struct gpio_desc *desc) int gpiod_direction_output(struct gpio_desc *desc, int value) diff --git a/Documentation/gpio/driver.txt b/Documentation/gpio/driver.txt index fa9a0a8b37348273df54a56c6c0022da94078078..18790c237977b5a585953ffef3e45a0eab64e468 100644 --- a/Documentation/gpio/driver.txt +++ b/Documentation/gpio/driver.txt @@ -157,13 +157,34 @@ Locking IRQ usage Input GPIOs can be used as IRQ signals. When this happens, a driver is requested to mark the GPIO as being used as an IRQ: - int gpiod_lock_as_irq(struct gpio_desc *desc) + int gpio_lock_as_irq(struct gpio_chip *chip, unsigned int offset) This will prevent the use of non-irq related GPIO APIs until the GPIO IRQ lock is released: - void gpiod_unlock_as_irq(struct gpio_desc *desc) + void gpio_unlock_as_irq(struct gpio_chip *chip, unsigned int offset) When implementing an irqchip inside a GPIO driver, these two functions should typically be called in the .startup() and .shutdown() callbacks from the irqchip. + + +Requesting self-owned GPIO pins +------------------------------- + +Sometimes it is useful to allow a GPIO chip driver to request its own GPIO +descriptors through the gpiolib API. Using gpio_request() for this purpose +does not help since it pins the module to the kernel forever (it calls +try_module_get()). A GPIO driver can use the following functions instead +to request and free descriptors without being pinned to the kernel forever. + + int gpiochip_request_own_desc(struct gpio_desc *desc, const char *label) + + void gpiochip_free_own_desc(struct gpio_desc *desc) + +Descriptors requested with gpiochip_request_own_desc() must be released with +gpiochip_free_own_desc(). + +These functions must be used with care since they do not affect module use +count. Do not use the functions to request gpio descriptors not owned by the +calling driver. diff --git a/Documentation/hwmon/ibmpowernv b/Documentation/hwmon/ibmpowernv new file mode 100644 index 0000000000000000000000000000000000000000..8826ba29db3668e11d5eaabd2c4ecc7fa78257c8 --- /dev/null +++ b/Documentation/hwmon/ibmpowernv @@ -0,0 +1,41 @@ +Kernel Driver IBMPOWERNV +======================== + +Supported systems: + * Any recent IBM P servers based on POWERNV platform + +Author: Neelesh Gupta + +Description +----------- + +This driver implements reading the platform sensors data like temperature/fan/ +voltage/power for 'POWERNV' platform. + +The driver uses the platform device infrastructure. It probes the device tree +for sensor devices during the __init phase and registers them with the 'hwmon'. +'hwmon' populates the 'sysfs' tree having attribute files, each for a given +sensor type and its attribute data. + +All the nodes in the DT appear under "/ibm,opal/sensors" and each valid node in +the DT maps to an attribute file in 'sysfs'. The node exports unique 'sensor-id' +which the driver uses to make an OPAL call to the firmware. + +Usage notes +----------- +The driver is built statically with the kernel by enabling the config +CONFIG_SENSORS_IBMPOWERNV. It can also be built as module 'ibmpowernv'. + +Sysfs attributes +---------------- + +fanX_input Measured RPM value. +fanX_min Threshold RPM for alert generation. +fanX_fault 0: No fail condition + 1: Failing fan +tempX_input Measured ambient temperature. +tempX_max Threshold ambient temperature for alert generation. +inX_input Measured power supply voltage +inX_fault 0: No fail condition. + 1: Failing power supply. +power1_input System power consumption (microWatt) diff --git a/Documentation/hwmon/lm75 b/Documentation/hwmon/lm75 index 2560a9c6d4453ba2ceeb3e3f34c107551cf1f6f6..c6a5ff1b4641a6659b7310d74937855a215c4c9d 100644 --- a/Documentation/hwmon/lm75 +++ b/Documentation/hwmon/lm75 @@ -42,13 +42,14 @@ Supported chips: Addresses scanned: none Datasheet: Publicly available at the ST website http://www.st.com/internet/analog/product/121769.jsp - * Texas Instruments TMP100, TMP101, TMP105, TMP75, TMP175, TMP275 - Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp175', 'tmp75', 'tmp275' + * Texas Instruments TMP100, TMP101, TMP105, TMP112, TMP75, TMP175, TMP275 + Prefixes: 'tmp100', 'tmp101', 'tmp105', 'tmp112', 'tmp175', 'tmp75', 'tmp275' Addresses scanned: none Datasheet: Publicly available at the Texas Instruments website http://www.ti.com/product/tmp100 http://www.ti.com/product/tmp101 http://www.ti.com/product/tmp105 + http://www.ti.com/product/tmp112 http://www.ti.com/product/tmp75 http://www.ti.com/product/tmp175 http://www.ti.com/product/tmp275 diff --git a/Documentation/hwmon/ntc_thermistor b/Documentation/hwmon/ntc_thermistor index 057b77029f2674c6bf6561fe9698e63ef9ee3e01..c5e05e2900a3250ed7f0884c15a82d72154bf65e 100644 --- a/Documentation/hwmon/ntc_thermistor +++ b/Documentation/hwmon/ntc_thermistor @@ -6,6 +6,11 @@ Supported thermistors from Murata: Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473', 'ncp15wl333' Datasheet: Publicly available at Murata +Supported thermistors from EPCOS: +* EPCOS NTC Thermistors B57330V2103 + Prefixes: b57330v2103 + Datasheet: Publicly available at EPCOS + Other NTC thermistors can be supported simply by adding compensation tables; e.g., NCP15WL333 support is added by the table ncpXXwl333. diff --git a/Documentation/hwmon/pmbus b/Documentation/hwmon/pmbus index cf756ed48ff9458d7cc6f8137d239f376ef2a154..a3557da8f5b4eaf8f9b0524290cd2a3905f94b19 100644 --- a/Documentation/hwmon/pmbus +++ b/Documentation/hwmon/pmbus @@ -23,12 +23,11 @@ Supported chips: http://www.lineagepower.com/oem/pdf/PDT012A0X.pdf http://www.lineagepower.com/oem/pdf/UDT020A0X.pdf http://www.lineagepower.com/oem/pdf/MDT040A0X.pdf - * Texas Instruments TPS40400, TPS40422 - Prefixes: 'tps40400', 'tps40422' + * Texas Instruments TPS40400 + Prefixes: 'tps40400' Addresses scanned: - Datasheets: http://www.ti.com/lit/gpn/tps40400 - http://www.ti.com/lit/gpn/tps40422 * Generic PMBus devices Prefix: 'pmbus' Addresses scanned: - diff --git a/Documentation/hwmon/powr1220 b/Documentation/hwmon/powr1220 new file mode 100644 index 0000000000000000000000000000000000000000..21e44f71ae6e175cd977c35bbaa2f4a9d3e87cee --- /dev/null +++ b/Documentation/hwmon/powr1220 @@ -0,0 +1,45 @@ +Kernel driver powr1220 +================== + +Supported chips: + * Lattice POWR1220AT8 + Prefix: 'powr1220' + Addresses scanned: none + Datasheet: Publicly available at the Lattice website + http://www.latticesemi.com/ + +Author: Scott Kanowitz + +Description +----------- + +This driver supports the Lattice POWR1220AT8 chip. The POWR1220 +includes voltage monitoring for 14 inputs as well as trim settings +for output voltages and GPIOs. This driver implements the voltage +monitoring portion of the chip. + +Voltages are sampled by a 12-bit ADC with a step size of 2 mV. +An in-line attenuator allows measurements from 0 to 6 V. The +attenuator is enabled or disabled depending on the setting of the +input's max value. The driver will enable the attenuator for any +value over the low measurement range maximum of 2 V. + +The input naming convention is as follows: + +driver name pin name +in0 VMON1 +in1 VMON2 +in2 VMON3 +in2 VMON4 +in4 VMON5 +in5 VMON6 +in6 VMON7 +in7 VMON8 +in8 VMON9 +in9 VMON10 +in10 VMON11 +in11 VMON12 +in12 VCCA +in13 VCCINP + +The ADC readings are updated on request with a minimum period of 1s. diff --git a/Documentation/hwmon/pwm-fan b/Documentation/hwmon/pwm-fan new file mode 100644 index 0000000000000000000000000000000000000000..18529d2e3bcfa711e9a7e2ddc13da36b7dc98000 --- /dev/null +++ b/Documentation/hwmon/pwm-fan @@ -0,0 +1,17 @@ +Kernel driver pwm-fan +===================== + +This driver enables the use of a PWM module to drive a fan. It uses the +generic PWM interface thus it is hardware independent. It can be used on +many SoCs, as long as the SoC supplies a PWM line driver that exposes +the generic PWM API. + +Author: Kamil Debski + +Description +----------- + +The driver implements a simple interface for driving a fan connected to +a PWM output. It uses the generic PWM interface, thus it can be used with +a range of SoCs. The driver exposes the fan to the user space through +the hwmon's sysfs interface. diff --git a/Documentation/hwmon/tmp103 b/Documentation/hwmon/tmp103 new file mode 100644 index 0000000000000000000000000000000000000000..ec00a15645baf5a9b071af64c287faff114c12a3 --- /dev/null +++ b/Documentation/hwmon/tmp103 @@ -0,0 +1,28 @@ +Kernel driver tmp103 +==================== + +Supported chips: + * Texas Instruments TMP103 + Prefix: 'tmp103' + Addresses scanned: none + Product info and datasheet: http://www.ti.com/product/tmp103 + +Author: + Heiko Schocher + +Description +----------- + +The TMP103 is a digital output temperature sensor in a four-ball +wafer chip-scale package (WCSP). The TMP103 is capable of reading +temperatures to a resolution of 1°C. The TMP103 is specified for +operation over a temperature range of –40°C to +125°C. + +Resolution: 8 Bits +Accuracy: ±1°C Typ (–10°C to +100°C) + +The driver provides the common sysfs-interface for temperatures (see +Documentation/hwmon/sysfs-interface under Temperatures). + +Please refer how to instantiate this driver: +Documentation/i2c/instantiating-devices diff --git a/Documentation/hwmon/tmp421 b/Documentation/hwmon/tmp421 index 0cf07f824741d3cda08625623ba157647a0ffe84..9e6fe5549ca1d0df68562fc434339faa41e46a2e 100644 --- a/Documentation/hwmon/tmp421 +++ b/Documentation/hwmon/tmp421 @@ -8,12 +8,20 @@ Supported chips: Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html * Texas Instruments TMP422 Prefix: 'tmp422' - Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f + Addresses scanned: I2C 0x4c, 0x4d, 0x4e and 0x4f Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html * Texas Instruments TMP423 Prefix: 'tmp423' - Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f + Addresses scanned: I2C 0x4c and 0x4d Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp421.html + * Texas Instruments TMP441 + Prefix: 'tmp441' + Addresses scanned: I2C 0x2a, 0x4c, 0x4d, 0x4e and 0x4f + Datasheet: http://www.ti.com/product/tmp441 + * Texas Instruments TMP442 + Prefix: 'tmp442' + Addresses scanned: I2C 0x4c and 0x4d + Datasheet: http://www.ti.com/product/tmp442 Authors: Andre Prendel @@ -21,13 +29,13 @@ Authors: Description ----------- -This driver implements support for Texas Instruments TMP421, TMP422 -and TMP423 temperature sensor chips. These chips implement one local -and up to one (TMP421), up to two (TMP422) or up to three (TMP423) -remote sensors. Temperature is measured in degrees Celsius. The chips -are wired over I2C/SMBus and specified over a temperature range of -40 -to +125 degrees Celsius. Resolution for both the local and remote -channels is 0.0625 degree C. +This driver implements support for Texas Instruments TMP421, TMP422, +TMP423, TMP441, and TMP442 temperature sensor chips. These chips +implement one local and up to one (TMP421, TMP441), up to two (TMP422, +TMP442) or up to three (TMP423) remote sensors. Temperature is measured +in degrees Celsius. The chips are wired over I2C/SMBus and specified +over a temperature range of -40 to +125 degrees Celsius. Resolution +for both the local and remote channels is 0.0625 degree C. The chips support only temperature measurement. The driver exports the temperature values via the following sysfs files: diff --git a/Documentation/hwmon/tps40422 b/Documentation/hwmon/tps40422 new file mode 100644 index 0000000000000000000000000000000000000000..24bb0688d515906ae907f034015adc4292d8ad80 --- /dev/null +++ b/Documentation/hwmon/tps40422 @@ -0,0 +1,64 @@ +Kernel driver tps40422 +====================== + +Supported chips: + * TI TPS40422 + Prefix: 'tps40422' + Addresses scanned: - + Datasheet: http://www.ti.com/lit/gpn/tps40422 + +Author: Zhu Laiwen + + +Description +----------- + +This driver supports TI TPS40422 Dual-Output or Two-Phase Synchronous Buck +Controller with PMBus + +The driver is a client driver to the core PMBus driver. +Please see Documentation/hwmon/pmbus for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. + + +Sysfs entries +------------- + +The following attributes are supported. + +in[1-2]_label "vout[1-2]" +in[1-2]_input Measured voltage. From READ_VOUT register. +in[1-2]_alarm voltage alarm. + +curr[1-2]_input Measured current. From READ_IOUT register. +curr[1-2]_label "iout[1-2]" +curr1_max Maximum current. From IOUT_OC_WARN_LIMIT register. +curr1_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. +curr1_max_alarm Current high alarm. From IOUT_OC_WARN_LIMIT status. +curr1_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. +curr2_alarm Current high alarm. From IOUT_OC_WARNING status. + +temp1_input Measured temperature. From READ_TEMPERATURE_2 register on page 0. +temp1_max Maximum temperature. From OT_WARN_LIMIT register. +temp1_crit Critical high temperature. From OT_FAULT_LIMIT register. +temp1_max_alarm Chip temperature high alarm. Set by comparing + READ_TEMPERATURE_2 on page 0 with OT_WARN_LIMIT if TEMP_OT_WARNING + status is set. +temp1_crit_alarm Chip temperature critical high alarm. Set by comparing + READ_TEMPERATURE_2 on page 0 with OT_FAULT_LIMIT if TEMP_OT_FAULT + status is set. +temp2_input Measured temperature. From READ_TEMPERATURE_2 register on page 1. +temp2_alarm Chip temperature alarm on page 1. diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index adf5e33e83124391eb2fa6b8589a467927c19b47..e9c803ea306d73adcf9cbe8407cfa1eef42fe150 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -25,6 +25,7 @@ Supported adapters: * Intel Avoton (SOC) * Intel Wellsburg (PCH) * Intel Coleto Creek (PCH) + * Intel Wildcat Point (PCH) * Intel Wildcat Point-LP (PCH) * Intel BayTrail (SOC) Datasheets: Publicly available at the Intel website diff --git a/Documentation/i2c/i2c-stub b/Documentation/i2c/i2c-stub index fa4b669c166b3a0145f070f935964a403dc85428..a16924fbd289e0262702ceece411ef6f12e36293 100644 --- a/Documentation/i2c/i2c-stub +++ b/Documentation/i2c/i2c-stub @@ -2,9 +2,9 @@ MODULE: i2c-stub DESCRIPTION: -This module is a very simple fake I2C/SMBus driver. It implements five +This module is a very simple fake I2C/SMBus driver. It implements six types of SMBus commands: write quick, (r/w) byte, (r/w) byte data, (r/w) -word data, and (r/w) I2C block data. +word data, (r/w) I2C block data, and (r/w) SMBus block data. You need to provide chip addresses as a module parameter when loading this driver, which will then only react to SMBus commands to these addresses. @@ -19,6 +19,14 @@ A pointer register with auto-increment is implemented for all byte operations. This allows for continuous byte reads like those supported by EEPROMs, among others. +SMBus block command support is disabled by default, and must be enabled +explicitly by setting the respective bits (0x03000000) in the functionality +module parameter. + +SMBus block commands must be written to configure an SMBus command for +SMBus block operations. Writes can be partial. Block read commands always +return the number of bytes selected with the largest write so far. + The typical use-case is like this: 1. load this module 2. use i2cset (from the i2c-tools project) to pre-load some data @@ -39,15 +47,18 @@ unsigned long functionality: value 0x1f0000 would only enable the quick, byte and byte data commands. +u8 bank_reg[10] +u8 bank_mask[10] +u8 bank_start[10] +u8 bank_end[10]: + Optional bank settings. They tell which bits in which register + select the active bank, as well as the range of banked registers. + CAVEATS: If your target driver polls some byte or word waiting for it to change, the stub could lock it up. Use i2cset to unlock it. -If the hardware for your driver has banked registers (e.g. Winbond sensors -chips) this module will not work well - although it could be extended to -support that pretty easily. - If you spam it hard enough, printk can be lossy. This module really wants something like relayfs. diff --git a/Documentation/infiniband/user_mad.txt b/Documentation/infiniband/user_mad.txt index 8a366959f5cc2e01a190692593b6962e830bf8bd..7aca13a54a3a2beadfe53589b74cdf91af2d5cb5 100644 --- a/Documentation/infiniband/user_mad.txt +++ b/Documentation/infiniband/user_mad.txt @@ -26,6 +26,11 @@ Creating MAD agents ioctl. Also, all agents registered through a file descriptor will be unregistered when the descriptor is closed. + 2014 -- a new registration ioctl is now provided which allows additional + fields to be provided during registration. + Users of this registration call are implicitly setting the use of + pkey_index (see below). + Receiving MADs MADs are received using read(). The receive side now supports @@ -104,10 +109,10 @@ P_Key Index Handling The old ib_umad interface did not allow setting the P_Key index for MADs that are sent and did not provide a way for obtaining the P_Key index of received MADs. A new layout for struct ib_user_mad_hdr - with a pkey_index member has been defined; however, to preserve - binary compatibility with older applications, this new layout will - not be used unless the IB_USER_MAD_ENABLE_PKEY ioctl is called - before a file descriptor is used for anything else. + with a pkey_index member has been defined; however, to preserve binary + compatibility with older applications, this new layout will not be used + unless one of IB_USER_MAD_ENABLE_PKEY or IB_USER_MAD_REGISTER_AGENT2 ioctl's + are called before a file descriptor is used for anything else. In September 2008, the IB_USER_MAD_ABI_VERSION will be incremented to 6, the new layout of struct ib_user_mad_hdr will be used by diff --git a/Documentation/ioctl/00-INDEX b/Documentation/ioctl/00-INDEX index d2fe4d4729efdb82e1629569e0c3ca65d2d83382..c1a9257879500f82476d2311fd90a5ee28e4f710 100644 --- a/Documentation/ioctl/00-INDEX +++ b/Documentation/ioctl/00-INDEX @@ -1,5 +1,7 @@ 00-INDEX - this file +botching-up-ioctls.txt + - how to avoid botching up ioctls cdrom.txt - summary of CDROM ioctl calls hdio.txt diff --git a/Documentation/ioctl/botching-up-ioctls.txt b/Documentation/ioctl/botching-up-ioctls.txt new file mode 100644 index 0000000000000000000000000000000000000000..45fe78c58019209ef0fea196378185b326abf2ec --- /dev/null +++ b/Documentation/ioctl/botching-up-ioctls.txt @@ -0,0 +1,219 @@ +(How to avoid) Botching up ioctls +================================= + +From: http://blog.ffwll.ch/2013/11/botching-up-ioctls.html + +By: Daniel Vetter, Copyright © 2013 Intel Corporation + +One clear insight kernel graphics hackers gained in the past few years is that +trying to come up with a unified interface to manage the execution units and +memory on completely different GPUs is a futile effort. So nowadays every +driver has its own set of ioctls to allocate memory and submit work to the GPU. +Which is nice, since there's no more insanity in the form of fake-generic, but +actually only used once interfaces. But the clear downside is that there's much +more potential to screw things up. + +To avoid repeating all the same mistakes again I've written up some of the +lessons learned while botching the job for the drm/i915 driver. Most of these +only cover technicalities and not the big-picture issues like what the command +submission ioctl exactly should look like. Learning these lessons is probably +something every GPU driver has to do on its own. + + +Prerequisites +------------- + +First the prerequisites. Without these you have already failed, because you +will need to add a a 32-bit compat layer: + + * Only use fixed sized integers. To avoid conflicts with typedefs in userspace + the kernel has special types like __u32, __s64. Use them. + + * Align everything to the natural size and use explicit padding. 32-bit + platforms don't necessarily align 64-bit values to 64-bit boundaries, but + 64-bit platforms do. So we always need padding to the natural size to get + this right. + + * Pad the entire struct to a multiple of 64-bits - the structure size will + otherwise differ on 32-bit versus 64-bit. Having a different structure size + hurts when passing arrays of structures to the kernel, or if the kernel + checks the structure size, which e.g. the drm core does. + + * Pointers are __u64, cast from/to a uintprt_t on the userspace side and + from/to a void __user * in the kernel. Try really hard not to delay this + conversion or worse, fiddle the raw __u64 through your code since that + diminishes the checking tools like sparse can provide. + + +Basics +------ + +With the joys of writing a compat layer avoided we can take a look at the basic +fumbles. Neglecting these will make backward and forward compatibility a real +pain. And since getting things wrong on the first attempt is guaranteed you +will have a second iteration or at least an extension for any given interface. + + * Have a clear way for userspace to figure out whether your new ioctl or ioctl + extension is supported on a given kernel. If you can't rely on old kernels + rejecting the new flags/modes or ioctls (since doing that was botched in the + past) then you need a driver feature flag or revision number somewhere. + + * Have a plan for extending ioctls with new flags or new fields at the end of + the structure. The drm core checks the passed-in size for each ioctl call + and zero-extends any mismatches between kernel and userspace. That helps, + but isn't a complete solution since newer userspace on older kernels won't + notice that the newly added fields at the end get ignored. So this still + needs a new driver feature flags. + + * Check all unused fields and flags and all the padding for whether it's 0, + and reject the ioctl if that's not the case. Otherwise your nice plan for + future extensions is going right down the gutters since someone will submit + an ioctl struct with random stack garbage in the yet unused parts. Which + then bakes in the ABI that those fields can never be used for anything else + but garbage. + + * Have simple testcases for all of the above. + + +Fun with Error Paths +-------------------- + +Nowadays we don't have any excuse left any more for drm drivers being neat +little root exploits. This means we both need full input validation and solid +error handling paths - GPUs will die eventually in the oddmost corner cases +anyway: + + * The ioctl must check for array overflows. Also it needs to check for + over/underflows and clamping issues of integer values in general. The usual + example is sprite positioning values fed directly into the hardware with the + hardware just having 12 bits or so. Works nicely until some odd display + server doesn't bother with clamping itself and the cursor wraps around the + screen. + + * Have simple testcases for every input validation failure case in your ioctl. + Check that the error code matches your expectations. And finally make sure + that you only test for one single error path in each subtest by submitting + otherwise perfectly valid data. Without this an earlier check might reject + the ioctl already and shadow the codepath you actually want to test, hiding + bugs and regressions. + + * Make all your ioctls restartable. First X really loves signals and second + this will allow you to test 90% of all error handling paths by just + interrupting your main test suite constantly with signals. Thanks to X's + love for signal you'll get an excellent base coverage of all your error + paths pretty much for free for graphics drivers. Also, be consistent with + how you handle ioctl restarting - e.g. drm has a tiny drmIoctl helper in its + userspace library. The i915 driver botched this with the set_tiling ioctl, + now we're stuck forever with some arcane semantics in both the kernel and + userspace. + + * If you can't make a given codepath restartable make a stuck task at least + killable. GPUs just die and your users won't like you more if you hang their + entire box (by means of an unkillable X process). If the state recovery is + still too tricky have a timeout or hangcheck safety net as a last-ditch + effort in case the hardware has gone bananas. + + * Have testcases for the really tricky corner cases in your error recovery code + - it's way too easy to create a deadlock between your hangcheck code and + waiters. + + +Time, Waiting and Missing it +---------------------------- + +GPUs do most everything asynchronously, so we have a need to time operations and +wait for oustanding ones. This is really tricky business; at the moment none of +the ioctls supported by the drm/i915 get this fully right, which means there's +still tons more lessons to learn here. + + * Use CLOCK_MONOTONIC as your reference time, always. It's what alsa, drm and + v4l use by default nowadays. But let userspace know which timestamps are + derived from different clock domains like your main system clock (provided + by the kernel) or some independent hardware counter somewhere else. Clocks + will mismatch if you look close enough, but if performance measuring tools + have this information they can at least compensate. If your userspace can + get at the raw values of some clocks (e.g. through in-command-stream + performance counter sampling instructions) consider exposing those also. + + * Use __s64 seconds plus __u64 nanoseconds to specify time. It's not the most + convenient time specification, but it's mostly the standard. + + * Check that input time values are normalized and reject them if not. Note + that the kernel native struct ktime has a signed integer for both seconds + and nanoseconds, so beware here. + + * For timeouts, use absolute times. If you're a good fellow and made your + ioctl restartable relative timeouts tend to be too coarse and can + indefinitely extend your wait time due to rounding on each restart. + Especially if your reference clock is something really slow like the display + frame counter. With a spec laywer hat on this isn't a bug since timeouts can + always be extended - but users will surely hate you if their neat animations + starts to stutter due to this. + + * Consider ditching any synchronous wait ioctls with timeouts and just deliver + an asynchronous event on a pollable file descriptor. It fits much better + into event driven applications' main loop. + + * Have testcases for corner-cases, especially whether the return values for + already-completed events, successful waits and timed-out waits are all sane + and suiting to your needs. + + +Leaking Resources, Not +---------------------- + +A full-blown drm driver essentially implements a little OS, but specialized to +the given GPU platforms. This means a driver needs to expose tons of handles +for different objects and other resources to userspace. Doing that right +entails its own little set of pitfalls: + + * Always attach the lifetime of your dynamically created resources to the + lifetime of a file descriptor. Consider using a 1:1 mapping if your resource + needs to be shared across processes - fd-passing over unix domain sockets + also simplifies lifetime management for userspace. + + * Always have O_CLOEXEC support. + + * Ensure that you have sufficient insulation between different clients. By + default pick a private per-fd namespace which forces any sharing to be done + explictly. Only go with a more global per-device namespace if the objects + are truly device-unique. One counterexample in the drm modeset interfaces is + that the per-device modeset objects like connectors share a namespace with + framebuffer objects, which mostly are not shared at all. A separate + namespace, private by default, for framebuffers would have been more + suitable. + + * Think about uniqueness requirements for userspace handles. E.g. for most drm + drivers it's a userspace bug to submit the same object twice in the same + command submission ioctl. But then if objects are shareable userspace needs + to know whether it has seen an imported object from a different process + already or not. I haven't tried this myself yet due to lack of a new class + of objects, but consider using inode numbers on your shared file descriptors + as unique identifiers - it's how real files are told apart, too. + Unfortunately this requires a full-blown virtual filesystem in the kernel. + + +Last, but not Least +------------------- + +Not every problem needs a new ioctl: + + * Think hard whether you really want a driver-private interface. Of course + it's much quicker to push a driver-private interface than engaging in + lengthy discussions for a more generic solution. And occasionally doing a + private interface to spearhead a new concept is what's required. But in the + end, once the generic interface comes around you'll end up maintainer two + interfaces. Indefinitely. + + * Consider other interfaces than ioctls. A sysfs attribute is much better for + per-device settings, or for child objects with fairly static lifetimes (like + output connectors in drm with all the detection override attributes). Or + maybe only your testsuite needs this interface, and then debugfs with its + disclaimer of not having a stable ABI would be better. + +Finally, the name of the game is to get it right on the first attempt, since if +your driver proves popular and your hardware platforms long-lived then you'll +be stuck with a given ioctl essentially forever. You can try to deprecate +horrible ioctls on newer iterations of your hardware, but generally it takes +years to accomplish this. And then again years until the last user able to +complain about regressions disappears, too. diff --git a/Documentation/kbuild/00-INDEX b/Documentation/kbuild/00-INDEX index e8d2b6d83a3d9045eec563d7bc2a4043ec358be4..8c5e6aa78004ab9fad62c42c2ef037457ed7c2b2 100644 --- a/Documentation/kbuild/00-INDEX +++ b/Documentation/kbuild/00-INDEX @@ -1,5 +1,7 @@ 00-INDEX - this file: info on the kernel build process +headers_install.txt + - how to export Linux headers for use by userspace kbuild.txt - developer information on kbuild kconfig.txt diff --git a/Documentation/make/headers_install.txt b/Documentation/kbuild/headers_install.txt similarity index 100% rename from Documentation/make/headers_install.txt rename to Documentation/kbuild/headers_install.txt diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index c600e2f44a623857f86f88eb8a021e68bda30456..764f5991a3fc74c32d9f218be85b5c977ea4efde 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -23,11 +23,10 @@ This document describes the Linux kernel Makefiles. === 4 Host Program support --- 4.1 Simple Host Program --- 4.2 Composite Host Programs - --- 4.3 Defining shared libraries - --- 4.4 Using C++ for host programs - --- 4.5 Controlling compiler options for host programs - --- 4.6 When host programs are actually built - --- 4.7 Using hostprogs-$(CONFIG_FOO) + --- 4.3 Using C++ for host programs + --- 4.4 Controlling compiler options for host programs + --- 4.5 When host programs are actually built + --- 4.6 Using hostprogs-$(CONFIG_FOO) === 5 Kbuild clean infrastructure @@ -643,29 +642,7 @@ Both possibilities are described in the following. Finally, the two .o files are linked to the executable, lxdialog. Note: The syntax -y is not permitted for host-programs. ---- 4.3 Defining shared libraries - - Objects with extension .so are considered shared libraries, and - will be compiled as position independent objects. - Kbuild provides support for shared libraries, but the usage - shall be restricted. - In the following example the libkconfig.so shared library is used - to link the executable conf. - - Example: - #scripts/kconfig/Makefile - hostprogs-y := conf - conf-objs := conf.o libkconfig.so - libkconfig-objs := expr.o type.o - - Shared libraries always require a corresponding -objs line, and - in the example above the shared library libkconfig is composed by - the two objects expr.o and type.o. - expr.o and type.o will be built as position independent code and - linked as a shared library libkconfig.so. C++ is not supported for - shared libraries. - ---- 4.4 Using C++ for host programs +--- 4.3 Using C++ for host programs kbuild offers support for host programs written in C++. This was introduced solely to support kconfig, and is not recommended @@ -688,7 +665,7 @@ Both possibilities are described in the following. qconf-cxxobjs := qconf.o qconf-objs := check.o ---- 4.5 Controlling compiler options for host programs +--- 4.4 Controlling compiler options for host programs When compiling host programs, it is possible to set specific flags. The programs will always be compiled utilising $(HOSTCC) passed @@ -716,7 +693,7 @@ Both possibilities are described in the following. When linking qconf, it will be passed the extra option "-L$(QTDIR)/lib". ---- 4.6 When host programs are actually built +--- 4.5 When host programs are actually built Kbuild will only build host-programs when they are referenced as a prerequisite. @@ -747,7 +724,7 @@ Both possibilities are described in the following. This will tell kbuild to build lxdialog even if not referenced in any rule. ---- 4.7 Using hostprogs-$(CONFIG_FOO) +--- 4.6 Using hostprogs-$(CONFIG_FOO) A typical pattern in a Kbuild file looks like this: diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 90f6139608ff7d326929ba48669da5106a92525c..5ae8608ca9f58a6331cae454ae7a0c84ab2f6c47 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -566,6 +566,17 @@ bytes respectively. Such letter suffixes can also be entirely omitted. possible to determine what the correct size should be. This option provides an override for these situations. + ca_keys= [KEYS] This parameter identifies a specific key(s) on + the system trusted keyring to be used for certificate + trust validation. + format: { id: | builtin } + + cca= [MIPS] Override the kernel pages' cache coherency + algorithm. Accepted values range from 0 to 7 + inclusive. See arch/mips/include/asm/pgtable-bits.h + for platform specific values (SB1, Loongson3 and + others). + ccw_timeout_log [S390] See Documentation/s390/CommonIO for details. @@ -1319,6 +1330,23 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Formats: { "ima" | "ima-ng" } Default: "ima-ng" + ima.ahash_minsize= [IMA] Minimum file size for asynchronous hash usage + Format: + Set the minimal file size for using asynchronous hash. + If left unspecified, ahash usage is disabled. + + ahash performance varies for different data sizes on + different crypto accelerators. This option can be used + to achieve the best performance for a particular HW. + + ima.ahash_bufsize= [IMA] Asynchronous hash buffer size + Format: + Set hashing buffer size. Default: 4k. + + ahash performance varies for different chunk sizes on + different crypto accelerators. This option can be used + to achieve best performance for particular HW. + init= [KNL] Format: Run specified binary instead of /sbin/init as init @@ -1422,10 +1450,6 @@ bytes respectively. Such letter suffixes can also be entirely omitted. ip= [IP_PNP] See Documentation/filesystems/nfs/nfsroot.txt. - ip2= [HW] Set IO/IRQ pairs for up to 4 IntelliPort boards - See comment before ip2_setup() in - drivers/char/ip2/ip2base.c. - irqfixup [HW] When an interrupt is not handled search all handlers for it. Intended to get systems with badly broken @@ -1698,8 +1722,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. 7 (KERN_DEBUG) debug-level messages log_buf_len=n[KMG] Sets the size of the printk ring buffer, - in bytes. n must be a power of two. The default - size is set in the kernel config file. + in bytes. n must be a power of two and greater + than the minimal size. The minimal size is defined + by LOG_BUF_SHIFT kernel config parameter. There is + also CONFIG_LOG_CPU_MAX_BUF_SHIFT config parameter + that allows to increase the default size depending on + the number of CPUs. See init/Kconfig for more details. logo.nologo [FB] Disables display of the built-in Linux logo. This may be used to provide more screen space for @@ -2172,6 +2200,21 @@ bytes respectively. Such letter suffixes can also be entirely omitted. and restore using xsave. The kernel will fallback to enabling legacy floating-point and sse state. + noxsaveopt [X86] Disables xsaveopt used in saving x86 extended + register states. The kernel will fall back to use + xsave to save the states. By using this parameter, + performance of saving the states is degraded because + xsave doesn't support modified optimization while + xsaveopt supports it on xsaveopt enabled systems. + + noxsaves [X86] Disables xsaves and xrstors used in saving and + restoring x86 extended register state in compacted + form of xsave area. The kernel will fall back to use + xsaveopt and xrstor to save and restore the states + in standard form of xsave area. By using this + parameter, xsave area per process might occupy more + memory on xsaves enabled systems. + eagerfpu= [X86] on enable eager fpu restore off disable eager fpu restore @@ -3036,6 +3079,13 @@ bytes respectively. Such letter suffixes can also be entirely omitted. S [KNL] Run init in single mode + s390_iommu= [HW,S390] + Set s390 IOTLB flushing mode + strict + With strict flushing every unmap operation will result in + an IOTLB flush. Default is lazy flushing before reuse, + which is faster. + sa1100ir [NET] See drivers/net/irda/sa1100_ir.c. @@ -3710,6 +3760,10 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Disables the ticketlock slowpath using Xen PV optimizations. + xen_nopv [X86] + Disables the PV optimizations forcing the HVM guest to + run as generic HVM guest with no PV drivers. + xirc2ps_cs= [NET,PCMCIA] Format: ,,,,,[,[,[,]]] diff --git a/Documentation/laptops/00-INDEX b/Documentation/laptops/00-INDEX index d399ae1fc724aaaf4bd52a20f4a08387970eddc7..a3b4f209e562ff7ba2ce2da2a5cc1dae09f6fa3d 100644 --- a/Documentation/laptops/00-INDEX +++ b/Documentation/laptops/00-INDEX @@ -18,3 +18,5 @@ sonypi.txt - info on Linux Sony Programmable I/O Device support. thinkpad-acpi.txt - information on the (IBM and Lenovo) ThinkPad ACPI Extras driver. +toshiba_haps.txt + - information on the Toshiba HDD Active Protection Sensor driver. diff --git a/Documentation/laptops/freefall.c b/Documentation/laptops/freefall.c index aab2ff09e86842aec48ba0d61b7972f4cae1f4c3..5e44b20b18481123aad30d32dd5113418d2e2919 100644 --- a/Documentation/laptops/freefall.c +++ b/Documentation/laptops/freefall.c @@ -29,15 +29,12 @@ static const char app_name[] = "FREE FALL"; static int set_unload_heads_path(char *device) { - char devname[64]; - if (strlen(device) <= 5 || strncmp(device, "/dev/", 5) != 0) return -EINVAL; - strncpy(devname, device + 5, sizeof(devname) - 1); strncpy(device_path, device, sizeof(device_path) - 1); snprintf(unload_heads_path, sizeof(unload_heads_path) - 1, - "/sys/block/%s/device/unload_heads", devname); + "/sys/block/%s/device/unload_heads", device+5); return 0; } diff --git a/Documentation/laptops/toshiba_haps.txt b/Documentation/laptops/toshiba_haps.txt new file mode 100644 index 0000000000000000000000000000000000000000..11dbcfdc9e7a8a78c344b27bc429ba6221cc2f4f --- /dev/null +++ b/Documentation/laptops/toshiba_haps.txt @@ -0,0 +1,76 @@ +Kernel driver toshiba_haps +Toshiba HDD Active Protection Sensor +==================================== + +Author: Azael Avalos + + +0. Contents +----------- + +1. Description +2. Interface +3. Accelerometer axes +4. Supported devices +5. Usage + + +1. Description +-------------- + +This driver provides support for the accelerometer found in various Toshiba +laptops, being called "Toshiba HDD Protection - Shock Sensor" officialy, +and detects laptops automatically with this device. +On Windows, Toshiba provided software monitors this device and provides +automatic HDD protection (head unload) on sudden moves or harsh vibrations, +however, this driver only provides a notification via a sysfs file to let +userspace tools or daemons act accordingly, as well as providing a sysfs +file to set the desired protection level or sensor sensibility. + + +2. Interface +------------ + +This device comes with 3 methods: +_STA - Checks existence of the device, returning Zero if the device does not + exists or is not supported. +PTLV - Sets the desired protection level. +RSSS - Shuts down the HDD protection interface for a few seconds, + then restores normal operation. + +Note: +The presence of Solid State Drives (SSD) can make this driver to fail loading, +given the fact that such drives have no movable parts, and thus, not requiring +any "protection" as well as failing during the evaluation of the _STA method +found under this device. + + +3. Accelerometer axes +--------------------- + +This device does not report any axes, however, to query the sensor position +a couple HCI (Hardware Configuration Interface) calls (0x6D and 0xA6) are +provided to query such information, handled by the kernel module toshiba_acpi +since kernel version 3.15. + + +4. Supported devices +-------------------- + +This driver binds itself to the ACPI device TOS620A, and any Toshiba laptop +with this device is supported, given the fact that they have the presence of +conventional HDD and not only SSD, or a combination of both HDD and SSD. + + +5. Usage +-------- + +The sysfs files under /sys/devices/LNXSYSTM:00/LNXSYBUS:00/TOS620A:00/ are: +protection_level - The protection_level is readable and writeable, and + provides a way to let userspace query the current protection + level, as well as set the desired protection level, the + available protection levels are: + 0 - Disabled | 1 - Low | 2 - Medium | 3 - High +reset_protection - The reset_protection entry is writeable only, being "1" + the only parameter it accepts, it is used to trigger + a reset of the protection interface. diff --git a/Documentation/mic/mic_overview.txt b/Documentation/mic/mic_overview.txt index b4192922480440b94f9ff8598895233c4249d437..77c541802ad9a3988eff621d07cc4013792cc9be 100644 --- a/Documentation/mic/mic_overview.txt +++ b/Documentation/mic/mic_overview.txt @@ -17,35 +17,50 @@ for applications. A key benefit of our solution is that it leverages the standard virtio framework for network, disk and console devices, though in our case the virtio framework is used across a PCIe bus. +MIC PCIe card has a dma controller with 8 channels. These channels are +shared between the host s/w and the card s/w. 0 to 3 are used by host +and 4 to 7 by card. As the dma device doesn't show up as PCIe device, +a virtual bus called mic bus is created and virtual dma devices are +created on it by the host/card drivers. On host the channels are private +and used only by the host driver to transfer data for the virtio devices. + Here is a block diagram of the various components described above. The virtio backends are situated on the host rather than the card given better single threaded performance for the host compared to MIC, the ability of the host to initiate DMA's to/from the card using the MIC DMA engine and the fact that the virtio block storage backend can only be on the host. - | - +----------+ | +----------+ - | Card OS | | | Host OS | - +----------+ | +----------+ - | -+-------+ +--------+ +------+ | +---------+ +--------+ +--------+ -| Virtio| |Virtio | |Virtio| | |Virtio | |Virtio | |Virtio | -| Net | |Console | |Block | | |Net | |Console | |Block | -| Driver| |Driver | |Driver| | |backend | |backend | |backend | -+-------+ +--------+ +------+ | +---------+ +--------+ +--------+ - | | | | | | | - | | | |User | | | - | | | |------|------------|---------|------- - +-------------------+ |Kernel +--------------------------+ - | | | Virtio over PCIe IOCTLs | - | | +--------------------------+ - +--------------+ | | - |Intel MIC | | +---------------+ - |Card Driver | | |Intel MIC | - +--------------+ | |Host Driver | - | | +---------------+ - | | | - +-------------------------------------------------------------+ - | | - | PCIe Bus | - +-------------------------------------------------------------+ + | + +----------+ | +----------+ + | Card OS | | | Host OS | + +----------+ | +----------+ + | + +-------+ +--------+ +------+ | +---------+ +--------+ +--------+ + | Virtio| |Virtio | |Virtio| | |Virtio | |Virtio | |Virtio | + | Net | |Console | |Block | | |Net | |Console | |Block | + | Driver| |Driver | |Driver| | |backend | |backend | |backend | + +-------+ +--------+ +------+ | +---------+ +--------+ +--------+ + | | | | | | | + | | | |User | | | + | | | |------|------------|---------|------- + +-------------------+ |Kernel +--------------------------+ + | | | Virtio over PCIe IOCTLs | + | | +--------------------------+ ++-----------+ | | | +-----------+ +| MIC DMA | | | | | MIC DMA | +| Driver | | | | | Driver | ++-----------+ | | | +-----------+ + | | | | | ++---------------+ | | | +----------------+ +|MIC virtual Bus| | | | |MIC virtual Bus | ++---------------+ | | | +----------------+ + | | | | | + | +--------------+ | +---------------+ | + | |Intel MIC | | |Intel MIC | | + +---|Card Driver | | |Host Driver | | + +--------------+ | +---------------+-----+ + | | | + +-------------------------------------------------------------+ + | | + | PCIe Bus | + +-------------------------------------------------------------+ diff --git a/Documentation/mic/mpssd/mpss b/Documentation/mic/mpssd/mpss index 3136c68dad0b7862ca0f994f0aee50cb70dcba21..cacbdb0aefb9d161df4ca37d28c524b232881289 100755 --- a/Documentation/mic/mpssd/mpss +++ b/Documentation/mic/mpssd/mpss @@ -48,18 +48,18 @@ start() fi echo -e $"Starting MPSS Stack" - echo -e $"Loading MIC_HOST Module" + echo -e $"Loading MIC_X100_DMA & MIC_HOST Modules" - # Ensure the driver is loaded - if [ ! -d "$sysfs" ]; then - modprobe mic_host + for f in "mic_host" "mic_x100_dma" + do + modprobe $f RETVAL=$? if [ $RETVAL -ne 0 ]; then failure echo return $RETVAL fi - fi + done # Start the daemon echo -n $"Starting MPSSD " @@ -170,8 +170,8 @@ unload() stop sleep 5 - echo -n $"Removing MIC_HOST Module: " - modprobe -r mic_host + echo -n $"Removing MIC_HOST & MIC_X100_DMA Modules: " + modprobe -r mic_host mic_x100_dma RETVAL=$? [ $RETVAL -ne 0 ] && failure || success echo diff --git a/Documentation/networking/bonding.txt b/Documentation/networking/bonding.txt index 9c723ecd00251534a0b011c4e0ffbd053242454e..eeb5b2e97bedac5ce910a06cc03bf42035d544d4 100644 --- a/Documentation/networking/bonding.txt +++ b/Documentation/networking/bonding.txt @@ -542,10 +542,10 @@ mode XOR policy: Transmit based on the selected transmit hash policy. The default policy is a simple [(source - MAC address XOR'd with destination MAC address) modulo - slave count]. Alternate transmit policies may be - selected via the xmit_hash_policy option, described - below. + MAC address XOR'd with destination MAC address XOR + packet type ID) modulo slave count]. Alternate transmit + policies may be selected via the xmit_hash_policy option, + described below. This mode provides load balancing and fault tolerance. @@ -801,10 +801,11 @@ xmit_hash_policy layer2 - Uses XOR of hardware MAC addresses to generate the - hash. The formula is + Uses XOR of hardware MAC addresses and packet type ID + field to generate the hash. The formula is - (source MAC XOR destination MAC) modulo slave count + hash = source MAC XOR destination MAC XOR packet type ID + slave number = hash modulo slave count This algorithm will place all traffic to a particular network peer on the same slave. @@ -819,7 +820,7 @@ xmit_hash_policy Uses XOR of hardware MAC addresses and IP addresses to generate the hash. The formula is - hash = source MAC XOR destination MAC + hash = source MAC XOR destination MAC XOR packet type ID hash = hash XOR source IP XOR destination IP hash = hash XOR (hash RSHIFT 16) hash = hash XOR (hash RSHIFT 8) @@ -2301,13 +2302,13 @@ broadcast: Like active-backup, there is not much advantage to this bandwidth. Additionally, the linux bonding 802.3ad implementation - distributes traffic by peer (using an XOR of MAC addresses), - so in a "gatewayed" configuration, all outgoing traffic will - generally use the same device. Incoming traffic may also end - up on a single device, but that is dependent upon the - balancing policy of the peer's 8023.ad implementation. In a - "local" configuration, traffic will be distributed across the - devices in the bond. + distributes traffic by peer (using an XOR of MAC addresses + and packet type ID), so in a "gatewayed" configuration, all + outgoing traffic will generally use the same device. Incoming + traffic may also end up on a single device, but that is + dependent upon the balancing policy of the peer's 8023.ad + implementation. In a "local" configuration, traffic will be + distributed across the devices in the bond. Finally, the 802.3ad mode mandates the use of the MII monitor, therefore, the ARP monitor is not available in this mode. diff --git a/Documentation/networking/filter.txt b/Documentation/networking/filter.txt index ee78eba78a9dd2ba5a25ace8f597c8c8f53c9de5..c48a9704bda8eaae5851bf54a0b0277cd01c88b4 100644 --- a/Documentation/networking/filter.txt +++ b/Documentation/networking/filter.txt @@ -586,12 +586,12 @@ team driver's classifier for its load-balancing mode, netfilter's xt_bpf extension, PTP dissector/classifier, and much more. They are all internally converted by the kernel into the new instruction set representation and run in the eBPF interpreter. For in-kernel handlers, this all works transparently -by using sk_unattached_filter_create() for setting up the filter, resp. -sk_unattached_filter_destroy() for destroying it. The macro -SK_RUN_FILTER(filter, ctx) transparently invokes eBPF interpreter or JITed -code to run the filter. 'filter' is a pointer to struct sk_filter that we -got from sk_unattached_filter_create(), and 'ctx' the given context (e.g. -skb pointer). All constraints and restrictions from sk_chk_filter() apply +by using bpf_prog_create() for setting up the filter, resp. +bpf_prog_destroy() for destroying it. The macro +BPF_PROG_RUN(filter, ctx) transparently invokes eBPF interpreter or JITed +code to run the filter. 'filter' is a pointer to struct bpf_prog that we +got from bpf_prog_create(), and 'ctx' the given context (e.g. +skb pointer). All constraints and restrictions from bpf_check_classic() apply before a conversion to the new layout is being done behind the scenes! Currently, the classic BPF format is being used for JITing on most of the diff --git a/Documentation/networking/i40e.txt b/Documentation/networking/i40e.txt index f737273c6dc1ab763906584ed5fb0e1ba680db3b..a251bf4fe9c9281baf497f17bff8630b4eb21705 100644 --- a/Documentation/networking/i40e.txt +++ b/Documentation/networking/i40e.txt @@ -69,8 +69,11 @@ Additional Configurations FCoE ---- - Fiber Channel over Ethernet (FCoE) hardware offload is not currently - supported. + The driver supports Fiber Channel over Ethernet (FCoE) and Data Center + Bridging (DCB) functionality. Configuring DCB and FCoE is outside the scope + of this driver doc. Refer to http://www.open-fcoe.org/ for FCoE project + information and http://www.open-lldp.org/ or email list + e1000-eedc@lists.sourceforge.net for DCB information. MAC and VLAN anti-spoofing feature ---------------------------------- diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index ab42c95f9985c0172109308c052cfe426a5bed9a..29a93518bf18acc7d9a0a3ac443abd03662e3792 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -101,19 +101,17 @@ ipfrag_high_thresh - INTEGER Maximum memory used to reassemble IP fragments. When ipfrag_high_thresh bytes of memory is allocated for this purpose, the fragment handler will toss packets until ipfrag_low_thresh - is reached. + is reached. This also serves as a maximum limit to namespaces + different from the initial one. ipfrag_low_thresh - INTEGER - See ipfrag_high_thresh + Maximum memory used to reassemble IP fragments before the kernel + begins to remove incomplete fragment queues to free up resources. + The kernel still accepts new fragments for defragmentation. ipfrag_time - INTEGER Time in seconds to keep an IP fragment in memory. -ipfrag_secret_interval - INTEGER - Regeneration interval (in seconds) of the hash secret (or lifetime - for the hash secret) for IP fragments. - Default: 600 - ipfrag_max_dist - INTEGER ipfrag_max_dist is a non-negative integer value which defines the maximum "disorder" which is allowed among fragments which share a @@ -1132,6 +1130,15 @@ flowlabel_consistency - BOOLEAN FALSE: disabled Default: TRUE +auto_flowlabels - BOOLEAN + Automatically generate flow labels based based on a flow hash + of the packet. This allows intermediate devices, such as routers, + to idenfify packet flows for mechanisms like Equal Cost Multipath + Routing (see RFC 6438). + TRUE: enabled + FALSE: disabled + Default: false + anycast_src_echo_reply - BOOLEAN Controls the use of anycast addresses as source addresses for ICMPv6 echo reply @@ -1153,11 +1160,6 @@ ip6frag_low_thresh - INTEGER ip6frag_time - INTEGER Time in seconds to keep an IPv6 fragment in memory. -ip6frag_secret_interval - INTEGER - Regeneration interval (in seconds) of the hash secret (or lifetime - for the hash secret) for IPv6 fragments. - Default: 600 - conf/default/*: Change the interface-specific default settings. @@ -1210,6 +1212,18 @@ accept_ra_defrtr - BOOLEAN Functional default: enabled if accept_ra is enabled. disabled if accept_ra is disabled. +accept_ra_from_local - BOOLEAN + Accept RA with source-address that is found on local machine + if the RA is otherwise proper and able to be accepted. + Default is to NOT accept these as it may be an un-intended + network loop. + + Functional default: + enabled if accept_ra_from_local is enabled + on a specific interface. + disabled if accept_ra_from_local is disabled + on a specific interface. + accept_ra_pinfo - BOOLEAN Learn Prefix Information in Router Advertisement. diff --git a/Documentation/networking/packet_mmap.txt b/Documentation/networking/packet_mmap.txt index 38112d512f47db9ec9a70edae7c7df83b7d13119..a6d7cb91069e207b24bae3a2f4e2925475639640 100644 --- a/Documentation/networking/packet_mmap.txt +++ b/Documentation/networking/packet_mmap.txt @@ -1008,14 +1008,9 @@ hardware timestamps to be used. Note: you may need to enable the generation of hardware timestamps with SIOCSHWTSTAMP (see related information from Documentation/networking/timestamping.txt). -PACKET_TIMESTAMP accepts the same integer bit field as -SO_TIMESTAMPING. However, only the SOF_TIMESTAMPING_SYS_HARDWARE -and SOF_TIMESTAMPING_RAW_HARDWARE values are recognized by -PACKET_TIMESTAMP. SOF_TIMESTAMPING_SYS_HARDWARE takes precedence over -SOF_TIMESTAMPING_RAW_HARDWARE if both bits are set. - - int req = 0; - req |= SOF_TIMESTAMPING_SYS_HARDWARE; +PACKET_TIMESTAMP accepts the same integer bit field as SO_TIMESTAMPING: + + int req = SOF_TIMESTAMPING_RAW_HARDWARE; setsockopt(fd, SOL_PACKET, PACKET_TIMESTAMP, (void *) &req, sizeof(req)) For the mmap(2)ed ring buffers, such timestamps are stored in the @@ -1023,14 +1018,13 @@ tpacket{,2,3}_hdr structure's tp_sec and tp_{n,u}sec members. To determine what kind of timestamp has been reported, the tp_status field is binary |'ed with the following possible bits ... - TP_STATUS_TS_SYS_HARDWARE TP_STATUS_TS_RAW_HARDWARE TP_STATUS_TS_SOFTWARE ... that are equivalent to its SOF_TIMESTAMPING_* counterparts. For the -RX_RING, if none of those 3 are set (i.e. PACKET_TIMESTAMP is not set), -then this means that a software fallback was invoked *within* PF_PACKET's -processing code (less precise). +RX_RING, if neither is set (i.e. PACKET_TIMESTAMP is not set), then a +software fallback was invoked *within* PF_PACKET's processing code (less +precise). Getting timestamps for the TX_RING works as follows: i) fill the ring frames, ii) call sendto() e.g. in blocking mode, iii) wait for status of relevant diff --git a/Documentation/networking/phy.txt b/Documentation/networking/phy.txt index 3544c98401fd121a1f217160575176960a078760..e839e7efc835c548e869cbda2e55850245b979b9 100644 --- a/Documentation/networking/phy.txt +++ b/Documentation/networking/phy.txt @@ -272,6 +272,8 @@ Writing a PHY driver txtsamp: Requests a transmit timestamp at the PHY level for a 'skb' set_wol: Enable Wake-on-LAN at the PHY level get_wol: Get the Wake-on-LAN status at the PHY level + read_mmd_indirect: Read PHY MMD indirect register + write_mmd_indirect: Write PHY MMD indirect register Of these, only config_aneg and read_status are required to be assigned by the driver code. The rest are optional. Also, it is @@ -284,7 +286,21 @@ Writing a PHY driver Feel free to look at the Marvell, Cicada, and Davicom drivers in drivers/net/phy/ for examples (the lxt and qsemi drivers have - not been tested as of this writing) + not been tested as of this writing). + + The PHY's MMD register accesses are handled by the PAL framework + by default, but can be overridden by a specific PHY driver if + required. This could be the case if a PHY was released for + manufacturing before the MMD PHY register definitions were + standardized by the IEEE. Most modern PHYs will be able to use + the generic PAL framework for accessing the PHY's MMD registers. + An example of such usage is for Energy Efficient Ethernet support, + implemented in the PAL. This support uses the PAL to access MMD + registers for EEE query and configuration if the PHY supports + the IEEE standard access mechanisms, or can use the PHY's specific + access interfaces if overridden by the specific PHY driver. See + the Micrel driver in drivers/net/phy/ for an example of how this + can be implemented. Board Fixups diff --git a/Documentation/networking/pktgen.txt b/Documentation/networking/pktgen.txt index 0e30c7845b2b316cb4bb7cdf32807aaf18a55610..0dffc6e3790215b90b3208e50cd8316222289bd4 100644 --- a/Documentation/networking/pktgen.txt +++ b/Documentation/networking/pktgen.txt @@ -24,6 +24,34 @@ For monitoring and control pktgen creates: /proc/net/pktgen/ethX +Tuning NIC for max performance +============================== + +The default NIC setting are (likely) not tuned for pktgen's artificial +overload type of benchmarking, as this could hurt the normal use-case. + +Specifically increasing the TX ring buffer in the NIC: + # ethtool -G ethX tx 1024 + +A larger TX ring can improve pktgen's performance, while it can hurt +in the general case, 1) because the TX ring buffer might get larger +than the CPUs L1/L2 cache, 2) because it allow more queueing in the +NIC HW layer (which is bad for bufferbloat). + +One should be careful to conclude, that packets/descriptors in the HW +TX ring cause delay. Drivers usually delay cleaning up the +ring-buffers (for various performance reasons), thus packets stalling +the TX ring, might just be waiting for cleanup. + +This cleanup issues is specifically the case, for the driver ixgbe +(Intel 82599 chip). This driver (ixgbe) combine TX+RX ring cleanups, +and the cleanup interval is affected by the ethtool --coalesce setting +of parameter "rx-usecs". + +For ixgbe use e.g "30" resulting in approx 33K interrupts/sec (1/30*10^6): + # ethtool -C ethX rx-usecs 30 + + Viewing threads =============== /proc/net/pktgen/kpktgend_0 diff --git a/Documentation/networking/timestamping.txt b/Documentation/networking/timestamping.txt index bc35541249032c4d64c8888741eddc64f87e4f2e..897f942b976bd61597d5dd49ceb17cf24a0bc70d 100644 --- a/Documentation/networking/timestamping.txt +++ b/Documentation/networking/timestamping.txt @@ -40,7 +40,7 @@ the set bits correspond to data that is available, then the control message will not be generated: SOF_TIMESTAMPING_SOFTWARE: report systime if available -SOF_TIMESTAMPING_SYS_HARDWARE: report hwtimetrans if available +SOF_TIMESTAMPING_SYS_HARDWARE: report hwtimetrans if available (deprecated) SOF_TIMESTAMPING_RAW_HARDWARE: report hwtimeraw if available It is worth noting that timestamps may be collected for reasons other @@ -88,13 +88,12 @@ hwtimeraw is the original hardware time stamp. Filled in if SOF_TIMESTAMPING_RAW_HARDWARE is set. No assumptions about its relation to system time should be made. -hwtimetrans is the hardware time stamp transformed so that it -corresponds as good as possible to system time. This correlation is -not perfect; as a consequence, sorting packets received via different -NICs by their hwtimetrans may differ from the order in which they were -received. hwtimetrans may be non-monotonic even for the same NIC. -Filled in if SOF_TIMESTAMPING_SYS_HARDWARE is set. Requires support -by the network device and will be empty without that support. +hwtimetrans is always zero. This field is deprecated. It used to hold +hw timestamps converted to system time. Instead, expose the hardware +clock device on the NIC directly as a HW PTP clock source, to allow +time conversion in userspace and optionally synchronize system time +with a userspace PTP stack such as linuxptp. For the PTP clock API, +see Documentation/ptp/ptp.txt. SIOCSHWTSTAMP, SIOCGHWTSTAMP: @@ -185,7 +184,6 @@ struct skb_shared_hwtstamps { * since arbitrary point in time */ ktime_t hwtstamp; - ktime_t syststamp; /* hwtstamp transformed to system time base */ }; Time stamps for outgoing packets are to be generated as follows: diff --git a/Documentation/networking/timestamping/timestamping.c b/Documentation/networking/timestamping/timestamping.c index 8ba82bfe6a33c57d54adcde8d7c3e1977926d565..5cdfd743447b72b465ffbff763a4981f3126a02f 100644 --- a/Documentation/networking/timestamping/timestamping.c +++ b/Documentation/networking/timestamping/timestamping.c @@ -76,7 +76,6 @@ static void usage(const char *error) " SOF_TIMESTAMPING_RX_HARDWARE - hardware time stamping of incoming packets\n" " SOF_TIMESTAMPING_RX_SOFTWARE - software fallback for incoming packets\n" " SOF_TIMESTAMPING_SOFTWARE - request reporting of software time stamps\n" - " SOF_TIMESTAMPING_SYS_HARDWARE - request reporting of transformed HW time stamps\n" " SOF_TIMESTAMPING_RAW_HARDWARE - request reporting of raw HW time stamps\n" " SIOCGSTAMP - check last socket time stamp\n" " SIOCGSTAMPNS - more accurate socket time stamp\n"); @@ -202,9 +201,7 @@ static void printpacket(struct msghdr *msg, int res, (long)stamp->tv_sec, (long)stamp->tv_nsec); stamp++; - printf("HW transformed %ld.%09ld ", - (long)stamp->tv_sec, - (long)stamp->tv_nsec); + /* skip deprecated HW transformed */ stamp++; printf("HW raw %ld.%09ld", (long)stamp->tv_sec, @@ -361,8 +358,6 @@ int main(int argc, char **argv) so_timestamping_flags |= SOF_TIMESTAMPING_RX_SOFTWARE; else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_SOFTWARE")) so_timestamping_flags |= SOF_TIMESTAMPING_SOFTWARE; - else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_SYS_HARDWARE")) - so_timestamping_flags |= SOF_TIMESTAMPING_SYS_HARDWARE; else if (!strcasecmp(argv[i], "SOF_TIMESTAMPING_RAW_HARDWARE")) so_timestamping_flags |= SOF_TIMESTAMPING_RAW_HARDWARE; else diff --git a/Documentation/oops-tracing.txt b/Documentation/oops-tracing.txt index e3155995ddd878c59d60d3519f2addaac716a743..beefb9f82902569bc120797108dbfc12d01faa97 100644 --- a/Documentation/oops-tracing.txt +++ b/Documentation/oops-tracing.txt @@ -268,6 +268,8 @@ characters, each representing a particular tainted value. 14: 'E' if an unsigned module has been loaded in a kernel supporting module signature. + 15: 'L' if a soft lockup has previously occurred on the system. + The primary reason for the 'Tainted: ' string is to tell kernel debuggers if this is a clean kernel or if anything unusual has occurred. Tainting is permanent: even if an offending module is diff --git a/Documentation/phy.txt b/Documentation/phy.txt index ebff6ee52441edbca95a0ebc8b20cd49ac218d3d..c6594af94d25529f15b38f7b877e22adf591f65d 100644 --- a/Documentation/phy.txt +++ b/Documentation/phy.txt @@ -53,10 +53,12 @@ unregister the PHY. The PHY driver should create the PHY in order for other peripheral controllers to make use of it. The PHY framework provides 2 APIs to create the PHY. -struct phy *phy_create(struct device *dev, const struct phy_ops *ops, - struct phy_init_data *init_data); -struct phy *devm_phy_create(struct device *dev, const struct phy_ops *ops, - struct phy_init_data *init_data); +struct phy *phy_create(struct device *dev, struct device_node *node, + const struct phy_ops *ops, + struct phy_init_data *init_data); +struct phy *devm_phy_create(struct device *dev, struct device_node *node, + const struct phy_ops *ops, + struct phy_init_data *init_data); The PHY drivers can use one of the above 2 APIs to create the PHY by passing the device pointer, phy ops and init_data. diff --git a/Documentation/power/opp.txt b/Documentation/power/opp.txt index a9adad828cdc450d480d6a5853bda056a6dfa413..c6279c2be47c20116dc56590b450f56a96a1ad5b 100644 --- a/Documentation/power/opp.txt +++ b/Documentation/power/opp.txt @@ -51,9 +51,6 @@ Typical usage of the OPP library is as follows: SoC framework -> modifies on required cases certain OPPs -> OPP layer -> queries to search/retrieve information -> -Architectures that provide a SoC framework for OPP should select ARCH_HAS_OPP -to make the OPP layer available. - OPP layer expects each domain to be represented by a unique device pointer. SoC framework registers a set of initial OPPs per device with the OPP layer. This list is expected to be an optimally small number typically around 5 per device. diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index 89a8816990ffbdc1b5be616427f8977f802db38a..48cff881cb8a13aac48c4455ac44d44f685eaf46 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -118,6 +118,10 @@ relative, time-based measurements. CONSTANT_CHARGE_CURRENT - constant charge current programmed by charger. CONSTANT_CHARGE_CURRENT_MAX - maximum charge current supported by the power supply object. +INPUT_CURRENT_LIMIT - input current limit programmed by charger. Indicates +the current drawn from a charging source. +CHARGE_TERM_CURRENT - Charge termination current used to detect the end of charge +condition. CONSTANT_CHARGE_VOLTAGE - constant charge voltage programmed by charger. CONSTANT_CHARGE_VOLTAGE_MAX - maximum charge voltage supported by the @@ -140,6 +144,8 @@ TEMP_ALERT_MAX - maximum battery temperature alert. TEMP_AMBIENT - ambient temperature. TEMP_AMBIENT_ALERT_MIN - minimum ambient temperature alert. TEMP_AMBIENT_ALERT_MAX - maximum ambient temperature alert. +TEMP_MIN - minimum operatable temperature +TEMP_MAX - maximum operatable temperature TIME_TO_EMPTY - seconds left for battery to be considered empty (i.e. while battery powers a load) diff --git a/Documentation/power/regulator/consumer.txt b/Documentation/power/regulator/consumer.txt index 55c4175d80996fbb75cca8ed33e85691697988ff..81c0e2b49cd86cb9096c72c56d46935677c2d990 100644 --- a/Documentation/power/regulator/consumer.txt +++ b/Documentation/power/regulator/consumer.txt @@ -180,3 +180,38 @@ int regulator_unregister_notifier(struct regulator *regulator, Regulators use the kernel notifier framework to send event to their interested consumers. + +7. Regulator Direct Register Access +=================================== +Some kinds of power management hardware or firmware are designed such that +they need to do low-level hardware access to regulators, with no involvement +from the kernel. Examples of such devices are: + +- clocksource with a voltage-controlled oscillator and control logic to change + the supply voltage over I2C to achieve a desired output clock rate +- thermal management firmware that can issue an arbitrary I2C transaction to + perform system poweroff during overtemperature conditions + +To set up such a device/firmware, various parameters like I2C address of the +regulator, addresses of various regulator registers etc. need to be configured +to it. The regulator framework provides the following helpers for querying +these details. + +Bus-specific details, like I2C addresses or transfer rates are handled by the +regmap framework. To get the regulator's regmap (if supported), use :- + +struct regmap *regulator_get_regmap(struct regulator *regulator); + +To obtain the hardware register offset and bitmask for the regulator's voltage +selector register, use :- + +int regulator_get_hardware_vsel_register(struct regulator *regulator, + unsigned *vsel_reg, + unsigned *vsel_mask); + +To convert a regulator framework voltage selector code (used by +regulator_list_voltage) to a hardware-specific voltage selector that can be +directly written to the voltage selector register, use :- + +int regulator_list_hardware_vsel(struct regulator *regulator, + unsigned selector); diff --git a/Documentation/powerpc/00-INDEX b/Documentation/powerpc/00-INDEX index 6db73df0427848fcd1083445c004e2724205854a..a68784d0a1ee1a99c432d1dd984c1f9bf9ae7406 100644 --- a/Documentation/powerpc/00-INDEX +++ b/Documentation/powerpc/00-INDEX @@ -17,8 +17,6 @@ firmware-assisted-dump.txt - Documentation on the firmware assisted dump mechanism "fadump". hvcs.txt - IBM "Hypervisor Virtual Console Server" Installation Guide -kvm_440.txt - - Various notes on the implementation of KVM for PowerPC 440. mpc52xx.txt - Linux 2.6.x on MPC52xx family pmu-ebb.txt diff --git a/Documentation/powerpc/kvm_440.txt b/Documentation/powerpc/kvm_440.txt deleted file mode 100644 index c02a003fa03a8b9580dbabf60feda4fb41952fa3..0000000000000000000000000000000000000000 --- a/Documentation/powerpc/kvm_440.txt +++ /dev/null @@ -1,41 +0,0 @@ -Hollis Blanchard -15 Apr 2008 - -Various notes on the implementation of KVM for PowerPC 440: - -To enforce isolation, host userspace, guest kernel, and guest userspace all -run at user privilege level. Only the host kernel runs in supervisor mode. -Executing privileged instructions in the guest traps into KVM (in the host -kernel), where we decode and emulate them. Through this technique, unmodified -440 Linux kernels can be run (slowly) as guests. Future performance work will -focus on reducing the overhead and frequency of these traps. - -The usual code flow is started from userspace invoking an "run" ioctl, which -causes KVM to switch into guest context. We use IVPR to hijack the host -interrupt vectors while running the guest, which allows us to direct all -interrupts to kvmppc_handle_interrupt(). At this point, we could either -- handle the interrupt completely (e.g. emulate "mtspr SPRG0"), or -- let the host interrupt handler run (e.g. when the decrementer fires), or -- return to host userspace (e.g. when the guest performs device MMIO) - -Address spaces: We take advantage of the fact that Linux doesn't use the AS=1 -address space (in host or guest), which gives us virtual address space to use -for guest mappings. While the guest is running, the host kernel remains mapped -in AS=0, but the guest can only use AS=1 mappings. - -TLB entries: The TLB entries covering the host linear mapping remain -present while running the guest. This reduces the overhead of lightweight -exits, which are handled by KVM running in the host kernel. We keep three -copies of the TLB: - - guest TLB: contents of the TLB as the guest sees it - - shadow TLB: the TLB that is actually in hardware while guest is running - - host TLB: to restore TLB state when context switching guest -> host -When a TLB miss occurs because a mapping was not present in the shadow TLB, -but was present in the guest TLB, KVM handles the fault without invoking the -guest. Large guest pages are backed by multiple 4KB shadow pages through this -mechanism. - -IO: MMIO and DCR accesses are emulated by userspace. We use virtio for network -and block IO, so those drivers must be enabled in the guest. It's possible -that some qemu device emulation (e.g. e1000 or rtl8139) may also work with -little effort. diff --git a/Documentation/rapidio/tsi721.txt b/Documentation/rapidio/tsi721.txt index 335f3c6087dcb35d5285bed3d766bba8f9bc4470..626052f403bb3300899659eb86676f62a9702618 100644 --- a/Documentation/rapidio/tsi721.txt +++ b/Documentation/rapidio/tsi721.txt @@ -20,13 +20,26 @@ II. Known problems None. -III. To do +III. DMA Engine Support - Add DMA data transfers (non-messaging). - Add inbound region (SRIO-to-PCIe) mapping. +Tsi721 mport driver supports DMA data transfers between local system memory and +remote RapidIO devices. This functionality is implemented according to SLAVE +mode API defined by common Linux kernel DMA Engine framework. + +Depending on system requirements RapidIO DMA operations can be included/excluded +by setting CONFIG_RAPIDIO_DMA_ENGINE option. Tsi721 miniport driver uses seven +out of eight available BDMA channels to support DMA data transfers. +One BDMA channel is reserved for generation of maintenance read/write requests. + +If Tsi721 mport driver have been built with RAPIDIO_DMA_ENGINE support included, +this driver will accept DMA-specific module parameter: + "dma_desc_per_channel" - defines number of hardware buffer descriptors used by + each BDMA channel of Tsi721 (by default - 128). IV. Version History + 1.1.0 - DMA operations re-worked to support data scatter/gather lists larger + than hardware buffer descriptors ring. 1.0.0 - Initial driver release. V. License diff --git a/Documentation/scsi/ncr53c8xx.txt b/Documentation/scsi/ncr53c8xx.txt index cda5f8fa2c66e9abfdc63978f14737455d7292fc..1d508dcbf85942bd5bbfd982c14bf0de1a24321c 100644 --- a/Documentation/scsi/ncr53c8xx.txt +++ b/Documentation/scsi/ncr53c8xx.txt @@ -1095,7 +1095,7 @@ SCSI_NCR_SETUP_FORCE_SYNC_NEGO (default: not defined) SCSI_NCR_SETUP_MASTER_PARITY (default: defined) If defined, master parity checking is enabled. -SCSI_NCR_SETUP_MASTER_PARITY (default: defined) +SCSI_NCR_SETUP_SCSI_PARITY (default: defined) If defined, SCSI parity checking is enabled. SCSI_NCR_PROFILE_SUPPORT (default: not defined) diff --git a/Documentation/scsi/tmscsim.txt b/Documentation/scsi/tmscsim.txt index 3303d218b32ec69ed529e3fcc1081478fbc5ec5a..0810132772a87de851d36ab56a08a459c4ba5c5a 100644 --- a/Documentation/scsi/tmscsim.txt +++ b/Documentation/scsi/tmscsim.txt @@ -317,8 +317,6 @@ Each of the parameters is a number, containing the described information: 4 0x10 16 Immediate return on BIOS seek command. (Not used) (*)5 0x20 32 Check for LUNs >= 1. - The default for LUN Check depends on CONFIG_SCSI_MULTI_LUN. - * TaggedCmnds is a number indicating the maximum number of Tagged Commands. It is the binary logarithm - 1 of the actual number. Max is 4 (32). Value Number of Tagged Commands diff --git a/Documentation/security/LSM.txt b/Documentation/security/LSM.txt index c335a763a2ed3451eba6e78b66ab3df2db743533..3db7e671c440050a4046fbd5263e7b1b4959f9b9 100644 --- a/Documentation/security/LSM.txt +++ b/Documentation/security/LSM.txt @@ -22,7 +22,7 @@ system, building their checks on top of the defined capability hooks. For more details on capabilities, see capabilities(7) in the Linux man-pages project. -Based on http://kerneltrap.org/Linux/Documenting_Security_Module_Intent, +Based on https://lkml.org/lkml/2007/10/26/215, a new LSM is accepted into the kernel when its intent (a description of what it tries to protect against and in what cases one would expect to use it) has been appropriately documented in Documentation/security/. diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt index a4c33f1a7c6de5dc2207a21bab00846266668f90..8727c194ca16a56f483b2f0cd2712654c0b948b4 100644 --- a/Documentation/security/keys.txt +++ b/Documentation/security/keys.txt @@ -1150,20 +1150,24 @@ The structure has a number of fields, some of which are mandatory: const void *data; size_t datalen; size_t quotalen; + time_t expiry; }; Before calling the method, the caller will fill in data and datalen with the payload blob parameters; quotalen will be filled in with the default - quota size from the key type and the rest will be cleared. + quota size from the key type; expiry will be set to TIME_T_MAX and the + rest will be cleared. If a description can be proposed from the payload contents, that should be attached as a string to the description field. This will be used for the key description if the caller of add_key() passes NULL or "". The method can attach anything it likes to type_data[] and payload. These - are merely passed along to the instantiate() or update() operations. + are merely passed along to the instantiate() or update() operations. If + set, the expiry time will be applied to the key if it is instantiated from + this data. - The method should return 0 if success ful or a negative error code + The method should return 0 if successful or a negative error code otherwise. @@ -1172,7 +1176,9 @@ The structure has a number of fields, some of which are mandatory: This method is only required if the preparse() method is provided, otherwise it is unused. It cleans up anything attached to the description, type_data and payload fields of the key_preparsed_payload - struct as filled in by the preparse() method. + struct as filled in by the preparse() method. It will always be called + after preparse() returns successfully, even if instantiate() or update() + succeed. (*) int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 7ccf933bfbe0dfada4a36522273527735536856a..48148d6d930786849c97cf79329b92fec755e946 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -2026,8 +2026,8 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. ------------------- Module for sound cards based on the Asus AV66/AV100/AV200 chips, - i.e., Xonar D1, DX, D2, D2X, DS, Essence ST (Deluxe), Essence STX, - HDAV1.3 (Deluxe), and HDAV1.3 Slim. + i.e., Xonar D1, DX, D2, D2X, DS, DSX, Essence ST (Deluxe), + Essence STX (II), HDAV1.3 (Deluxe), and HDAV1.3 Slim. This module supports autoprobe and multiple cards. diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index d1ab5e17eb13b001ad8947a4b8d21a1d9c96e178..a5e7547143448e07f18631767bf07954c5b20a4c 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -284,6 +284,11 @@ STAC92HD83* hp-zephyr HP Zephyr hp-led HP with broken BIOS for mute LED hp-inv-led HP with broken BIOS for inverted mute LED + hp-mic-led HP with mic-mute LED + headset-jack Dell Latitude with a 4-pin headset jack + hp-envy-bass Pin fixup for HP Envy bass speaker (NID 0x0f) + hp-envy-ts-bass Pin fixup for HP Envy TS bass speaker (NID 0x10) + hp-bnb13-eq Hardware equalizer setup for HP laptops auto BIOS setup (default) STAC92HD95 diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt index cbc2f03056bdef25da9dc87013680748c905e9d0..aee73e78c7d42a8aa7d9c1f630c705ddb6c3838c 100644 --- a/Documentation/stable_kernel_rules.txt +++ b/Documentation/stable_kernel_rules.txt @@ -29,6 +29,9 @@ Rules on what kind of patches are accepted, and which ones are not, into the Procedure for submitting patches to the -stable tree: + - If the patch covers files in net/ or drivers/net please follow netdev stable + submission guidelines as described in + Documentation/networking/netdev-FAQ.txt - Send the patch, after verifying that it follows the above rules, to stable@vger.kernel.org. You must note the upstream commit ID in the changelog of your submission, as well as the kernel version you wish diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index c14374e71775f62ba1ed72a856a702cb1d819e47..f79eb96663790f1c116f6a44d706af048bdedc88 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -826,6 +826,7 @@ can be ORed together: 4096 - An out-of-tree module has been loaded. 8192 - An unsigned module has been loaded in a kernel supporting module signature. +16384 - A soft lockup has previously occurred on the system. ============================================================== diff --git a/Documentation/timers/00-INDEX b/Documentation/timers/00-INDEX index 6d042dc1cce0db6d2862200e456f6d7b3324af4e..ee212a27772f64882b6280f7ef1065a332e5222d 100644 --- a/Documentation/timers/00-INDEX +++ b/Documentation/timers/00-INDEX @@ -12,6 +12,8 @@ Makefile - Build and link hpet_example NO_HZ.txt - Summary of the different methods for the scheduler clock-interrupts management. +timekeeping.txt + - Clock sources, clock events, sched_clock() and delay timer notes timers-howto.txt - how to insert delays in the kernel the right (tm) way. timer_stats.txt diff --git a/Documentation/timers/timekeeping.txt b/Documentation/timers/timekeeping.txt new file mode 100644 index 0000000000000000000000000000000000000000..f3a8cf28f802027da8ff03e663fd5ffb4990eb76 --- /dev/null +++ b/Documentation/timers/timekeeping.txt @@ -0,0 +1,179 @@ +Clock sources, Clock events, sched_clock() and delay timers +----------------------------------------------------------- + +This document tries to briefly explain some basic kernel timekeeping +abstractions. It partly pertains to the drivers usually found in +drivers/clocksource in the kernel tree, but the code may be spread out +across the kernel. + +If you grep through the kernel source you will find a number of architecture- +specific implementations of clock sources, clockevents and several likewise +architecture-specific overrides of the sched_clock() function and some +delay timers. + +To provide timekeeping for your platform, the clock source provides +the basic timeline, whereas clock events shoot interrupts on certain points +on this timeline, providing facilities such as high-resolution timers. +sched_clock() is used for scheduling and timestamping, and delay timers +provide an accurate delay source using hardware counters. + + +Clock sources +------------- + +The purpose of the clock source is to provide a timeline for the system that +tells you where you are in time. For example issuing the command 'date' on +a Linux system will eventually read the clock source to determine exactly +what time it is. + +Typically the clock source is a monotonic, atomic counter which will provide +n bits which count from 0 to 2^(n-1) and then wraps around to 0 and start over. +It will ideally NEVER stop ticking as long as the system is running. It +may stop during system suspend. + +The clock source shall have as high resolution as possible, and the frequency +shall be as stable and correct as possible as compared to a real-world wall +clock. It should not move unpredictably back and forth in time or miss a few +cycles here and there. + +It must be immune to the kind of effects that occur in hardware where e.g. +the counter register is read in two phases on the bus lowest 16 bits first +and the higher 16 bits in a second bus cycle with the counter bits +potentially being updated in between leading to the risk of very strange +values from the counter. + +When the wall-clock accuracy of the clock source isn't satisfactory, there +are various quirks and layers in the timekeeping code for e.g. synchronizing +the user-visible time to RTC clocks in the system or against networked time +servers using NTP, but all they do basically is update an offset against +the clock source, which provides the fundamental timeline for the system. +These measures does not affect the clock source per se, they only adapt the +system to the shortcomings of it. + +The clock source struct shall provide means to translate the provided counter +into a nanosecond value as an unsigned long long (unsigned 64 bit) number. +Since this operation may be invoked very often, doing this in a strict +mathematical sense is not desirable: instead the number is taken as close as +possible to a nanosecond value using only the arithmetic operations +multiply and shift, so in clocksource_cyc2ns() you find: + + ns ~= (clocksource * mult) >> shift + +You will find a number of helper functions in the clock source code intended +to aid in providing these mult and shift values, such as +clocksource_khz2mult(), clocksource_hz2mult() that help determine the +mult factor from a fixed shift, and clocksource_register_hz() and +clocksource_register_khz() which will help out assigning both shift and mult +factors using the frequency of the clock source as the only input. + +For real simple clock sources accessed from a single I/O memory location +there is nowadays even clocksource_mmio_init() which will take a memory +location, bit width, a parameter telling whether the counter in the +register counts up or down, and the timer clock rate, and then conjure all +necessary parameters. + +Since a 32-bit counter at say 100 MHz will wrap around to zero after some 43 +seconds, the code handling the clock source will have to compensate for this. +That is the reason why the clock source struct also contains a 'mask' +member telling how many bits of the source are valid. This way the timekeeping +code knows when the counter will wrap around and can insert the necessary +compensation code on both sides of the wrap point so that the system timeline +remains monotonic. + + +Clock events +------------ + +Clock events are the conceptual reverse of clock sources: they take a +desired time specification value and calculate the values to poke into +hardware timer registers. + +Clock events are orthogonal to clock sources. The same hardware +and register range may be used for the clock event, but it is essentially +a different thing. The hardware driving clock events has to be able to +fire interrupts, so as to trigger events on the system timeline. On an SMP +system, it is ideal (and customary) to have one such event driving timer per +CPU core, so that each core can trigger events independently of any other +core. + +You will notice that the clock event device code is based on the same basic +idea about translating counters to nanoseconds using mult and shift +arithmetic, and you find the same family of helper functions again for +assigning these values. The clock event driver does not need a 'mask' +attribute however: the system will not try to plan events beyond the time +horizon of the clock event. + + +sched_clock() +------------- + +In addition to the clock sources and clock events there is a special weak +function in the kernel called sched_clock(). This function shall return the +number of nanoseconds since the system was started. An architecture may or +may not provide an implementation of sched_clock() on its own. If a local +implementation is not provided, the system jiffy counter will be used as +sched_clock(). + +As the name suggests, sched_clock() is used for scheduling the system, +determining the absolute timeslice for a certain process in the CFS scheduler +for example. It is also used for printk timestamps when you have selected to +include time information in printk for things like bootcharts. + +Compared to clock sources, sched_clock() has to be very fast: it is called +much more often, especially by the scheduler. If you have to do trade-offs +between accuracy compared to the clock source, you may sacrifice accuracy +for speed in sched_clock(). It however requires some of the same basic +characteristics as the clock source, i.e. it should be monotonic. + +The sched_clock() function may wrap only on unsigned long long boundaries, +i.e. after 64 bits. Since this is a nanosecond value this will mean it wraps +after circa 585 years. (For most practical systems this means "never".) + +If an architecture does not provide its own implementation of this function, +it will fall back to using jiffies, making its maximum resolution 1/HZ of the +jiffy frequency for the architecture. This will affect scheduling accuracy +and will likely show up in system benchmarks. + +The clock driving sched_clock() may stop or reset to zero during system +suspend/sleep. This does not matter to the function it serves of scheduling +events on the system. However it may result in interesting timestamps in +printk(). + +The sched_clock() function should be callable in any context, IRQ- and +NMI-safe and return a sane value in any context. + +Some architectures may have a limited set of time sources and lack a nice +counter to derive a 64-bit nanosecond value, so for example on the ARM +architecture, special helper functions have been created to provide a +sched_clock() nanosecond base from a 16- or 32-bit counter. Sometimes the +same counter that is also used as clock source is used for this purpose. + +On SMP systems, it is crucial for performance that sched_clock() can be called +independently on each CPU without any synchronization performance hits. +Some hardware (such as the x86 TSC) will cause the sched_clock() function to +drift between the CPUs on the system. The kernel can work around this by +enabling the CONFIG_HAVE_UNSTABLE_SCHED_CLOCK option. This is another aspect +that makes sched_clock() different from the ordinary clock source. + + +Delay timers (some architectures only) +-------------------------------------- + +On systems with variable CPU frequency, the various kernel delay() functions +will sometimes behave strangely. Basically these delays usually use a hard +loop to delay a certain number of jiffy fractions using a "lpj" (loops per +jiffy) value, calibrated on boot. + +Let's hope that your system is running on maximum frequency when this value +is calibrated: as an effect when the frequency is geared down to half the +full frequency, any delay() will be twice as long. Usually this does not +hurt, as you're commonly requesting that amount of delay *or more*. But +basically the semantics are quite unpredictable on such systems. + +Enter timer-based delays. Using these, a timer read may be used instead of +a hard-coded loop for providing the desired delay. + +This is done by declaring a struct delay_timer and assigning the appropriate +function pointers and rate settings for this delay timer. + +This is available on some architectures like OpenRISC or ARM. diff --git a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl index 78c9a7b2b58fdb0a55f72c23890e07dcf8f912b2..8f961ef2b4577d4b7485e84bd379dc5ebd022f47 100644 --- a/Documentation/trace/postprocess/trace-vmscan-postprocess.pl +++ b/Documentation/trace/postprocess/trace-vmscan-postprocess.pl @@ -47,6 +47,10 @@ use constant HIGH_KSWAPD_REWAKEUP => 21; use constant HIGH_NR_SCANNED => 22; use constant HIGH_NR_TAKEN => 23; use constant HIGH_NR_RECLAIMED => 24; +use constant HIGH_NR_FILE_SCANNED => 25; +use constant HIGH_NR_ANON_SCANNED => 26; +use constant HIGH_NR_FILE_RECLAIMED => 27; +use constant HIGH_NR_ANON_RECLAIMED => 28; my %perprocesspid; my %perprocess; @@ -56,14 +60,18 @@ my $opt_read_procstat; my $total_wakeup_kswapd; my ($total_direct_reclaim, $total_direct_nr_scanned); +my ($total_direct_nr_file_scanned, $total_direct_nr_anon_scanned); my ($total_direct_latency, $total_kswapd_latency); my ($total_direct_nr_reclaimed); +my ($total_direct_nr_file_reclaimed, $total_direct_nr_anon_reclaimed); my ($total_direct_writepage_file_sync, $total_direct_writepage_file_async); my ($total_direct_writepage_anon_sync, $total_direct_writepage_anon_async); my ($total_kswapd_nr_scanned, $total_kswapd_wake); +my ($total_kswapd_nr_file_scanned, $total_kswapd_nr_anon_scanned); my ($total_kswapd_writepage_file_sync, $total_kswapd_writepage_file_async); my ($total_kswapd_writepage_anon_sync, $total_kswapd_writepage_anon_async); my ($total_kswapd_nr_reclaimed); +my ($total_kswapd_nr_file_reclaimed, $total_kswapd_nr_anon_reclaimed); # Catch sigint and exit on request my $sigint_report = 0; @@ -374,6 +382,7 @@ EVENT_PROCESS: } my $isolate_mode = $1; my $nr_scanned = $4; + my $file = $6; # To closer match vmstat scanning statistics, only count isolate_both # and isolate_inactive as scanning. isolate_active is rotation @@ -382,6 +391,11 @@ EVENT_PROCESS: # isolate_both == 3 if ($isolate_mode != 2) { $perprocesspid{$process_pid}->{HIGH_NR_SCANNED} += $nr_scanned; + if ($file == 1) { + $perprocesspid{$process_pid}->{HIGH_NR_FILE_SCANNED} += $nr_scanned; + } else { + $perprocesspid{$process_pid}->{HIGH_NR_ANON_SCANNED} += $nr_scanned; + } } } elsif ($tracepoint eq "mm_vmscan_lru_shrink_inactive") { $details = $6; @@ -391,8 +405,19 @@ EVENT_PROCESS: print " $regex_lru_shrink_inactive/o\n"; next; } + my $nr_reclaimed = $4; + my $flags = $6; + my $file = 0; + if ($flags =~ /RECLAIM_WB_FILE/) { + $file = 1; + } $perprocesspid{$process_pid}->{HIGH_NR_RECLAIMED} += $nr_reclaimed; + if ($file) { + $perprocesspid{$process_pid}->{HIGH_NR_FILE_RECLAIMED} += $nr_reclaimed; + } else { + $perprocesspid{$process_pid}->{HIGH_NR_ANON_RECLAIMED} += $nr_reclaimed; + } } elsif ($tracepoint eq "mm_vmscan_writepage") { $details = $6; if ($details !~ /$regex_writepage/o) { @@ -493,7 +518,11 @@ sub dump_stats { $total_direct_reclaim += $stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}; $total_wakeup_kswapd += $stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD}; $total_direct_nr_scanned += $stats{$process_pid}->{HIGH_NR_SCANNED}; + $total_direct_nr_file_scanned += $stats{$process_pid}->{HIGH_NR_FILE_SCANNED}; + $total_direct_nr_anon_scanned += $stats{$process_pid}->{HIGH_NR_ANON_SCANNED}; $total_direct_nr_reclaimed += $stats{$process_pid}->{HIGH_NR_RECLAIMED}; + $total_direct_nr_file_reclaimed += $stats{$process_pid}->{HIGH_NR_FILE_RECLAIMED}; + $total_direct_nr_anon_reclaimed += $stats{$process_pid}->{HIGH_NR_ANON_RECLAIMED}; $total_direct_writepage_file_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC}; $total_direct_writepage_anon_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC}; $total_direct_writepage_file_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC}; @@ -513,7 +542,11 @@ sub dump_stats { $stats{$process_pid}->{MM_VMSCAN_DIRECT_RECLAIM_BEGIN}, $stats{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD}, $stats{$process_pid}->{HIGH_NR_SCANNED}, + $stats{$process_pid}->{HIGH_NR_FILE_SCANNED}, + $stats{$process_pid}->{HIGH_NR_ANON_SCANNED}, $stats{$process_pid}->{HIGH_NR_RECLAIMED}, + $stats{$process_pid}->{HIGH_NR_FILE_RECLAIMED}, + $stats{$process_pid}->{HIGH_NR_ANON_RECLAIMED}, $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC}, $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC}, $this_reclaim_delay / 1000); @@ -552,7 +585,11 @@ sub dump_stats { $total_kswapd_wake += $stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}; $total_kswapd_nr_scanned += $stats{$process_pid}->{HIGH_NR_SCANNED}; + $total_kswapd_nr_file_scanned += $stats{$process_pid}->{HIGH_NR_FILE_SCANNED}; + $total_kswapd_nr_anon_scanned += $stats{$process_pid}->{HIGH_NR_ANON_SCANNED}; $total_kswapd_nr_reclaimed += $stats{$process_pid}->{HIGH_NR_RECLAIMED}; + $total_kswapd_nr_file_reclaimed += $stats{$process_pid}->{HIGH_NR_FILE_RECLAIMED}; + $total_kswapd_nr_anon_reclaimed += $stats{$process_pid}->{HIGH_NR_ANON_RECLAIMED}; $total_kswapd_writepage_file_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC}; $total_kswapd_writepage_anon_sync += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC}; $total_kswapd_writepage_file_async += $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC}; @@ -563,7 +600,11 @@ sub dump_stats { $stats{$process_pid}->{MM_VMSCAN_KSWAPD_WAKE}, $stats{$process_pid}->{HIGH_KSWAPD_REWAKEUP}, $stats{$process_pid}->{HIGH_NR_SCANNED}, + $stats{$process_pid}->{HIGH_NR_FILE_SCANNED}, + $stats{$process_pid}->{HIGH_NR_ANON_SCANNED}, $stats{$process_pid}->{HIGH_NR_RECLAIMED}, + $stats{$process_pid}->{HIGH_NR_FILE_RECLAIMED}, + $stats{$process_pid}->{HIGH_NR_ANON_RECLAIMED}, $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC}, $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} + $stats{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_ASYNC}); @@ -594,7 +635,11 @@ sub dump_stats { print "\nSummary\n"; print "Direct reclaims: $total_direct_reclaim\n"; print "Direct reclaim pages scanned: $total_direct_nr_scanned\n"; + print "Direct reclaim file pages scanned: $total_direct_nr_file_scanned\n"; + print "Direct reclaim anon pages scanned: $total_direct_nr_anon_scanned\n"; print "Direct reclaim pages reclaimed: $total_direct_nr_reclaimed\n"; + print "Direct reclaim file pages reclaimed: $total_direct_nr_file_reclaimed\n"; + print "Direct reclaim anon pages reclaimed: $total_direct_nr_anon_reclaimed\n"; print "Direct reclaim write file sync I/O: $total_direct_writepage_file_sync\n"; print "Direct reclaim write anon sync I/O: $total_direct_writepage_anon_sync\n"; print "Direct reclaim write file async I/O: $total_direct_writepage_file_async\n"; @@ -604,7 +649,11 @@ sub dump_stats { print "\n"; print "Kswapd wakeups: $total_kswapd_wake\n"; print "Kswapd pages scanned: $total_kswapd_nr_scanned\n"; + print "Kswapd file pages scanned: $total_kswapd_nr_file_scanned\n"; + print "Kswapd anon pages scanned: $total_kswapd_nr_anon_scanned\n"; print "Kswapd pages reclaimed: $total_kswapd_nr_reclaimed\n"; + print "Kswapd file pages reclaimed: $total_kswapd_nr_file_reclaimed\n"; + print "Kswapd anon pages reclaimed: $total_kswapd_nr_anon_reclaimed\n"; print "Kswapd reclaim write file sync I/O: $total_kswapd_writepage_file_sync\n"; print "Kswapd reclaim write anon sync I/O: $total_kswapd_writepage_anon_sync\n"; print "Kswapd reclaim write file async I/O: $total_kswapd_writepage_file_async\n"; @@ -629,7 +678,11 @@ sub aggregate_perprocesspid() { $perprocess{$process}->{MM_VMSCAN_WAKEUP_KSWAPD} += $perprocesspid{$process_pid}->{MM_VMSCAN_WAKEUP_KSWAPD}; $perprocess{$process}->{HIGH_KSWAPD_REWAKEUP} += $perprocesspid{$process_pid}->{HIGH_KSWAPD_REWAKEUP}; $perprocess{$process}->{HIGH_NR_SCANNED} += $perprocesspid{$process_pid}->{HIGH_NR_SCANNED}; + $perprocess{$process}->{HIGH_NR_FILE_SCANNED} += $perprocesspid{$process_pid}->{HIGH_NR_FILE_SCANNED}; + $perprocess{$process}->{HIGH_NR_ANON_SCANNED} += $perprocesspid{$process_pid}->{HIGH_NR_ANON_SCANNED}; $perprocess{$process}->{HIGH_NR_RECLAIMED} += $perprocesspid{$process_pid}->{HIGH_NR_RECLAIMED}; + $perprocess{$process}->{HIGH_NR_FILE_RECLAIMED} += $perprocesspid{$process_pid}->{HIGH_NR_FILE_RECLAIMED}; + $perprocess{$process}->{HIGH_NR_ANON_RECLAIMED} += $perprocesspid{$process_pid}->{HIGH_NR_ANON_RECLAIMED}; $perprocess{$process}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_SYNC}; $perprocess{$process}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_ANON_SYNC}; $perprocess{$process}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC} += $perprocesspid{$process_pid}->{MM_VMSCAN_WRITEPAGE_FILE_ASYNC}; diff --git a/Documentation/usb/hotplug.txt b/Documentation/usb/hotplug.txt index 6424b130485c5c26056191c09abe38c451b5f97a..a80b0e9a7a0bbdf5e415c8f3423bba735ee640f3 100644 --- a/Documentation/usb/hotplug.txt +++ b/Documentation/usb/hotplug.txt @@ -105,13 +105,13 @@ macros such as these, and use driver_info to store more information. A short example, for a driver that supports several specific USB devices and their quirks, might have a MODULE_DEVICE_TABLE like this: - static const struct usb_device_id mydriver_id_table = { + static const struct usb_device_id mydriver_id_table[] = { { USB_DEVICE (0x9999, 0xaaaa), driver_info: QUIRK_X }, { USB_DEVICE (0xbbbb, 0x8888), driver_info: QUIRK_Y|QUIRK_Z }, ... { } /* end with an all-zeroes entry */ - } - MODULE_DEVICE_TABLE (usb, mydriver_id_table); + }; + MODULE_DEVICE_TABLE(usb, mydriver_id_table); Most USB device drivers should pass these tables to the USB subsystem as well as to the module management subsystem. Not all, though: some driver @@ -134,7 +134,7 @@ something like this: if exposing any operations through usbdevfs: .ioctl = my_ioctl, */ - } + }; When the USB subsystem knows about a driver's device ID table, it's used when choosing drivers to probe(). The thread doing new device processing checks diff --git a/Documentation/usb/power-management.txt b/Documentation/usb/power-management.txt index 1392b61d6ebe59c87bbe616cc4a9796cba9a160f..7b90fe034c4b5701383e4c757c441484c9bbec9b 100644 --- a/Documentation/usb/power-management.txt +++ b/Documentation/usb/power-management.txt @@ -2,8 +2,27 @@ Alan Stern - October 28, 2010 - + Last-updated: February 2014 + + + Contents: + --------- + * What is Power Management? + * What is Remote Wakeup? + * When is a USB device idle? + * Forms of dynamic PM + * The user interface for dynamic PM + * Changing the default idle-delay time + * Warnings + * The driver interface for Power Management + * The driver interface for autosuspend and autoresume + * Other parts of the driver interface + * Mutual exclusion + * Interaction between dynamic PM and system PM + * xHCI hardware link PM + * USB Port Power Control + * User Interface for Port Power Control + * Suggested Userspace Port Power Policy What is Power Management? @@ -516,3 +535,225 @@ relevant attribute files is usb2_hardware_lpm. driver will enable hardware LPM for the device. You can write y/Y/1 or n/N/0 to the file to enable/disable USB2 hardware LPM manually. This is for test purpose mainly. + + + USB Port Power Control + ---------------------- + +In addition to suspending endpoint devices and enabling hardware +controlled link power management, the USB subsystem also has the +capability to disable power to ports under some conditions. Power is +controlled through Set/ClearPortFeature(PORT_POWER) requests to a hub. +In the case of a root or platform-internal hub the host controller +driver translates PORT_POWER requests into platform firmware (ACPI) +method calls to set the port power state. For more background see the +Linux Plumbers Conference 2012 slides [1] and video [2]: + +Upon receiving a ClearPortFeature(PORT_POWER) request a USB port is +logically off, and may trigger the actual loss of VBUS to the port [3]. +VBUS may be maintained in the case where a hub gangs multiple ports into +a shared power well causing power to remain until all ports in the gang +are turned off. VBUS may also be maintained by hub ports configured for +a charging application. In any event a logically off port will lose +connection with its device, not respond to hotplug events, and not +respond to remote wakeup events*. + +WARNING: turning off a port may result in the inability to hot add a device. +Please see "User Interface for Port Power Control" for details. + +As far as the effect on the device itself it is similar to what a device +goes through during system suspend, i.e. the power session is lost. Any +USB device or driver that misbehaves with system suspend will be +similarly affected by a port power cycle event. For this reason the +implementation shares the same device recovery path (and honors the same +quirks) as the system resume path for the hub. + +[1]: http://dl.dropbox.com/u/96820575/sarah-sharp-lpt-port-power-off2-mini.pdf +[2]: http://linuxplumbers.ubicast.tv/videos/usb-port-power-off-kerneluserspace-api/ +[3]: USB 3.1 Section 10.12 +* wakeup note: if a device is configured to send wakeup events the port + power control implementation will block poweroff attempts on that + port. + + + User Interface for Port Power Control + ------------------------------------- + +The port power control mechanism uses the PM runtime system. Poweroff is +requested by clearing the power/pm_qos_no_power_off flag of the port device +(defaults to 1). If the port is disconnected it will immediately receive a +ClearPortFeature(PORT_POWER) request. Otherwise, it will honor the pm runtime +rules and require the attached child device and all descendants to be suspended. +This mechanism is dependent on the hub advertising port power switching in its +hub descriptor (wHubCharacteristics logical power switching mode field). + +Note, some interface devices/drivers do not support autosuspend. Userspace may +need to unbind the interface drivers before the usb_device will suspend. An +unbound interface device is suspended by default. When unbinding, be careful +to unbind interface drivers, not the driver of the parent usb device. Also, +leave hub interface drivers bound. If the driver for the usb device (not +interface) is unbound the kernel is no longer able to resume the device. If a +hub interface driver is unbound, control of its child ports is lost and all +attached child-devices will disconnect. A good rule of thumb is that if the +'driver/module' link for a device points to /sys/module/usbcore then unbinding +it will interfere with port power control. + +Example of the relevant files for port power control. Note, in this example +these files are relative to a usb hub device (prefix). + + prefix=/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1 + + attached child device + + hub port device + | + hub interface device + | | + v v v + $prefix/3-1:1.0/3-1-port1/device + + $prefix/3-1:1.0/3-1-port1/power/pm_qos_no_power_off + $prefix/3-1:1.0/3-1-port1/device/power/control + $prefix/3-1:1.0/3-1-port1/device/3-1.1:/driver/unbind + $prefix/3-1:1.0/3-1-port1/device/3-1.1:/driver/unbind + ... + $prefix/3-1:1.0/3-1-port1/device/3-1.1:/driver/unbind + +In addition to these files some ports may have a 'peer' link to a port on +another hub. The expectation is that all superspeed ports have a +hi-speed peer. + +$prefix/3-1:1.0/3-1-port1/peer -> ../../../../usb2/2-1/2-1:1.0/2-1-port1 +../../../../usb2/2-1/2-1:1.0/2-1-port1/peer -> ../../../../usb3/3-1/3-1:1.0/3-1-port1 + +Distinct from 'companion ports', or 'ehci/xhci shared switchover ports' +peer ports are simply the hi-speed and superspeed interface pins that +are combined into a single usb3 connector. Peer ports share the same +ancestor XHCI device. + +While a superspeed port is powered off a device may downgrade its +connection and attempt to connect to the hi-speed pins. The +implementation takes steps to prevent this: + +1/ Port suspend is sequenced to guarantee that hi-speed ports are powered-off + before their superspeed peer is permitted to power-off. The implication is + that the setting pm_qos_no_power_off to zero on a superspeed port may not cause + the port to power-off until its highspeed peer has gone to its runtime suspend + state. Userspace must take care to order the suspensions if it wants to + guarantee that a superspeed port will power-off. + +2/ Port resume is sequenced to force a superspeed port to power-on prior to its + highspeed peer. + +3/ Port resume always triggers an attached child device to resume. After a + power session is lost the device may have been removed, or need reset. + Resuming the child device when the parent port regains power resolves those + states and clamps the maximum port power cycle frequency at the rate the child + device can suspend (autosuspend-delay) and resume (reset-resume latency). + +Sysfs files relevant for port power control: + /power/pm_qos_no_power_off: + This writable flag controls the state of an idle port. + Once all children and descendants have suspended the + port may suspend/poweroff provided that + pm_qos_no_power_off is '0'. If pm_qos_no_power_off is + '1' the port will remain active/powered regardless of + the stats of descendants. Defaults to 1. + + /power/runtime_status: + This file reflects whether the port is 'active' (power is on) + or 'suspended' (logically off). There is no indication to + userspace whether VBUS is still supplied. + + /connect_type: + An advisory read-only flag to userspace indicating the + location and connection type of the port. It returns + one of four values 'hotplug', 'hardwired', 'not used', + and 'unknown'. All values, besides unknown, are set by + platform firmware. + + "hotplug" indicates an externally connectable/visible + port on the platform. Typically userspace would choose + to keep such a port powered to handle new device + connection events. + + "hardwired" refers to a port that is not visible but + connectable. Examples are internal ports for USB + bluetooth that can be disconnected via an external + switch or a port with a hardwired USB camera. It is + expected to be safe to allow these ports to suspend + provided pm_qos_no_power_off is coordinated with any + switch that gates connections. Userspace must arrange + for the device to be connected prior to the port + powering off, or to activate the port prior to enabling + connection via a switch. + + "not used" refers to an internal port that is expected + to never have a device connected to it. These may be + empty internal ports, or ports that are not physically + exposed on a platform. Considered safe to be + powered-off at all times. + + "unknown" means platform firmware does not provide + information for this port. Most commonly refers to + external hub ports which should be considered 'hotplug' + for policy decisions. + + NOTE1: since we are relying on the BIOS to get this ACPI + information correct, the USB port descriptions may be + missing or wrong. + + NOTE2: Take care in clearing pm_qos_no_power_off. Once + power is off this port will + not respond to new connect events. + + Once a child device is attached additional constraints are + applied before the port is allowed to poweroff. + + /power/control: + Must be 'auto', and the port will not + power down until /power/runtime_status + reflects the 'suspended' state. Default + value is controlled by child device driver. + + /power/persist: + This defaults to '1' for most devices and indicates if + kernel can persist the device's configuration across a + power session loss (suspend / port-power event). When + this value is '0' (quirky devices), port poweroff is + disabled. + + /driver/unbind: + Wakeup capable devices will block port poweroff. At + this time the only mechanism to clear the usb-internal + wakeup-capability for an interface device is to unbind + its driver. + +Summary of poweroff pre-requisite settings relative to a port device: + + echo 0 > power/pm_qos_no_power_off + echo 0 > peer/power/pm_qos_no_power_off # if it exists + echo auto > power/control # this is the default value + echo auto > /power/control + echo 1 > /power/persist # this is the default value + + Suggested Userspace Port Power Policy + ------------------------------------- + +As noted above userspace needs to be careful and deliberate about what +ports are enabled for poweroff. + +The default configuration is that all ports start with +power/pm_qos_no_power_off set to '1' causing ports to always remain +active. + +Given confidence in the platform firmware's description of the ports +(ACPI _PLD record for a port populates 'connect_type') userspace can +clear pm_qos_no_power_off for all 'not used' ports. The same can be +done for 'hardwired' ports provided poweroff is coordinated with any +connection switch for the port. + +A more aggressive userspace policy is to enable USB port power off for +all ports (set /power/pm_qos_no_power_off to '0') when +some external factor indicates the user has stopped interacting with the +system. For example, a distro may want to enable power off all USB +ports when the screen blanks, and re-power them when the screen becomes +active. Smart phones and tablets may want to power off USB ports when +the user pushes the power button. diff --git a/Documentation/vfio.txt b/Documentation/vfio.txt index b9ca02370d466762310ed9415babf364355d5468..96978eced34154187acdd328fe403a14ca6200f7 100644 --- a/Documentation/vfio.txt +++ b/Documentation/vfio.txt @@ -305,7 +305,15 @@ faster, the map/unmap handling has been implemented in real mode which provides an excellent performance which has limitations such as inability to do locked pages accounting in real time. -So 3 additional ioctls have been added: +4) According to sPAPR specification, A Partitionable Endpoint (PE) is an I/O +subtree that can be treated as a unit for the purposes of partitioning and +error recovery. A PE may be a single or multi-function IOA (IO Adapter), a +function of a multi-function IOA, or multiple IOAs (possibly including switch +and bridge structures above the multiple IOAs). PPC64 guests detect PCI errors +and recover from them via EEH RTAS services, which works on the basis of +additional ioctl commands. + +So 4 additional ioctls have been added: VFIO_IOMMU_SPAPR_TCE_GET_INFO - returns the size and the start of the DMA window on the PCI bus. @@ -316,9 +324,12 @@ So 3 additional ioctls have been added: VFIO_IOMMU_DISABLE - disables the container. + VFIO_EEH_PE_OP - provides an API for EEH setup, error detection and recovery. The code flow from the example above should be slightly changed: + struct vfio_eeh_pe_op pe_op = { .argsz = sizeof(pe_op), .flags = 0 }; + ..... /* Add the group to the container */ ioctl(group, VFIO_GROUP_SET_CONTAINER, &container); @@ -342,9 +353,79 @@ The code flow from the example above should be slightly changed: dma_map.flags = VFIO_DMA_MAP_FLAG_READ | VFIO_DMA_MAP_FLAG_WRITE; /* Check here is .iova/.size are within DMA window from spapr_iommu_info */ - ioctl(container, VFIO_IOMMU_MAP_DMA, &dma_map); - ..... + + /* Get a file descriptor for the device */ + device = ioctl(group, VFIO_GROUP_GET_DEVICE_FD, "0000:06:0d.0"); + + .... + + /* Gratuitous device reset and go... */ + ioctl(device, VFIO_DEVICE_RESET); + + /* Make sure EEH is supported */ + ioctl(container, VFIO_CHECK_EXTENSION, VFIO_EEH); + + /* Enable the EEH functionality on the device */ + pe_op.op = VFIO_EEH_PE_ENABLE; + ioctl(container, VFIO_EEH_PE_OP, &pe_op); + + /* You're suggested to create additional data struct to represent + * PE, and put child devices belonging to same IOMMU group to the + * PE instance for later reference. + */ + + /* Check the PE's state and make sure it's in functional state */ + pe_op.op = VFIO_EEH_PE_GET_STATE; + ioctl(container, VFIO_EEH_PE_OP, &pe_op); + + /* Save device state using pci_save_state(). + * EEH should be enabled on the specified device. + */ + + .... + + /* When 0xFF's returned from reading PCI config space or IO BARs + * of the PCI device. Check the PE's state to see if that has been + * frozen. + */ + ioctl(container, VFIO_EEH_PE_OP, &pe_op); + + /* Waiting for pending PCI transactions to be completed and don't + * produce any more PCI traffic from/to the affected PE until + * recovery is finished. + */ + + /* Enable IO for the affected PE and collect logs. Usually, the + * standard part of PCI config space, AER registers are dumped + * as logs for further analysis. + */ + pe_op.op = VFIO_EEH_PE_UNFREEZE_IO; + ioctl(container, VFIO_EEH_PE_OP, &pe_op); + + /* + * Issue PE reset: hot or fundamental reset. Usually, hot reset + * is enough. However, the firmware of some PCI adapters would + * require fundamental reset. + */ + pe_op.op = VFIO_EEH_PE_RESET_HOT; + ioctl(container, VFIO_EEH_PE_OP, &pe_op); + pe_op.op = VFIO_EEH_PE_RESET_DEACTIVATE; + ioctl(container, VFIO_EEH_PE_OP, &pe_op); + + /* Configure the PCI bridges for the affected PE */ + pe_op.op = VFIO_EEH_PE_CONFIGURE; + ioctl(container, VFIO_EEH_PE_OP, &pe_op); + + /* Restored state we saved at initialization time. pci_restore_state() + * is good enough as an example. + */ + + /* Hopefully, error is recovered successfully. Now, you can resume to + * start PCI traffic to/from the affected PE. + */ + + .... ------------------------------------------------------------------------------- diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index fc009d0ee7d63e6566be0a7be5a331c4e0ccbce0..a74eeccfe700995322e8cd0c91e0703d22537622 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -41,3 +41,5 @@ 40 -> TurboSight TBS 6981 [6981:8888] 41 -> TurboSight TBS 6980 [6980:8888] 42 -> Leadtek Winfast PxPVR2200 [107d:6f21] + 43 -> Hauppauge ImpactVCB-e [0070:7133] + 44 -> DViCO FusionHDTV DVB-T Dual Express2 [18ac:db98] diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx index 5a3ddcd340d3df06f9136ddd24a59256788fa982..bc3351bb48b419765cc0acb9112539268d75b8ef 100644 --- a/Documentation/video4linux/CARDLIST.em28xx +++ b/Documentation/video4linux/CARDLIST.em28xx @@ -77,7 +77,7 @@ 76 -> KWorld PlusTV 340U or UB435-Q (ATSC) (em2870) [1b80:a340] 77 -> EM2874 Leadership ISDBT (em2874) 78 -> PCTV nanoStick T2 290e (em28174) - 79 -> Terratec Cinergy H5 (em2884) [0ccd:10a2,0ccd:10ad,0ccd:10b6] + 79 -> Terratec Cinergy H5 (em2884) [eb1a:2885,0ccd:10a2,0ccd:10ad,0ccd:10b6] 80 -> PCTV DVB-S2 Stick (460e) (em28174) 81 -> Hauppauge WinTV HVR 930C (em2884) [2040:1605] 82 -> Terratec Cinergy HTC Stick (em2884) [0ccd:00b2] diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt index 06cf3ac83631cc760de1ddd75776644314293eac..0f84ce8c9a7b1389c4c9b34fd9b5f427bdb22c40 100644 --- a/Documentation/video4linux/v4l2-controls.txt +++ b/Documentation/video4linux/v4l2-controls.txt @@ -77,9 +77,9 @@ Basic usage for V4L2 and sub-device drivers Where foo->v4l2_dev is of type struct v4l2_device. - Finally, remove all control functions from your v4l2_ioctl_ops: - vidioc_queryctrl, vidioc_querymenu, vidioc_g_ctrl, vidioc_s_ctrl, - vidioc_g_ext_ctrls, vidioc_try_ext_ctrls and vidioc_s_ext_ctrls. + Finally, remove all control functions from your v4l2_ioctl_ops (if any): + vidioc_queryctrl, vidioc_query_ext_ctrl, vidioc_querymenu, vidioc_g_ctrl, + vidioc_s_ctrl, vidioc_g_ext_ctrls, vidioc_try_ext_ctrls and vidioc_s_ext_ctrls. Those are now no longer needed. 1.3.2) For sub-device drivers do this: @@ -258,8 +258,8 @@ The new control value has already been validated, so all you need to do is to actually update the hardware registers. You're done! And this is sufficient for most of the drivers we have. No need -to do any validation of control values, or implement QUERYCTRL/QUERYMENU. And -G/S_CTRL as well as G/TRY/S_EXT_CTRLS are automatically supported. +to do any validation of control values, or implement QUERYCTRL, QUERY_EXT_CTRL +and QUERYMENU. And G/S_CTRL as well as G/TRY/S_EXT_CTRLS are automatically supported. ============================================================================== @@ -288,30 +288,45 @@ of v4l2_device. Accessing Control Values ======================== -The v4l2_ctrl struct contains these two unions: +The following union is used inside the control framework to access control +values: - /* The current control value. */ - union { +union v4l2_ctrl_ptr { + s32 *p_s32; + s64 *p_s64; + char *p_char; + void *p; +}; + +The v4l2_ctrl struct contains these fields that can be used to access both +current and new values: + + s32 val; + struct { s32 val; - s64 val64; - char *string; } cur; - /* The new control value. */ - union { - s32 val; - s64 val64; - char *string; - }; -Within the control ops you can freely use these. The val and val64 speak for -themselves. The string pointers point to character buffers of length + union v4l2_ctrl_ptr p_new; + union v4l2_ctrl_ptr p_cur; + +If the control has a simple s32 type type, then: + + &ctrl->val == ctrl->p_new.p_s32 + &ctrl->cur.val == ctrl->p_cur.p_s32 + +For all other types use ctrl->p_cur.p. Basically the val +and cur.val fields can be considered an alias since these are used so often. + +Within the control ops you can freely use these. The val and cur.val speak for +themselves. The p_char pointers point to character buffers of length ctrl->maximum + 1, and are always 0-terminated. -In most cases 'cur' contains the current cached control value. When you create -a new control this value is made identical to the default value. After calling -v4l2_ctrl_handler_setup() this value is passed to the hardware. It is generally -a good idea to call this function. +Unless the control is marked volatile the p_cur field points to the the +current cached control value. When you create a new control this value is made +identical to the default value. After calling v4l2_ctrl_handler_setup() this +value is passed to the hardware. It is generally a good idea to call this +function. Whenever a new value is set that new value is automatically cached. This means that most drivers do not need to implement the g_volatile_ctrl() op. The @@ -362,8 +377,8 @@ will result in a deadlock since these helpers lock the handler as well. You can also take the handler lock yourself: mutex_lock(&state->ctrl_handler.lock); - printk(KERN_INFO "String value is '%s'\n", ctrl1->cur.string); - printk(KERN_INFO "Integer value is '%s'\n", ctrl2->cur.val); + pr_info("String value is '%s'\n", ctrl1->p_cur.p_char); + pr_info("Integer value is '%s'\n", ctrl2->cur.val); mutex_unlock(&state->ctrl_handler.lock); diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 667a43361706c28c5343944de9836b40009cad8b..a11dff07ef71ed82cc9fcc08161af349285137a1 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -675,11 +675,6 @@ You should also set these fields: video_device is initialized you *do* know which parent PCI device to use and so you set dev_device to the correct PCI device. -- flags: optional. Set to V4L2_FL_USE_FH_PRIO if you want to let the framework - handle the VIDIOC_G/S_PRIORITY ioctls. This requires that you use struct - v4l2_fh. Eventually this flag will disappear once all drivers use the core - priority handling. But for now it has to be set explicitly. - If you use v4l2_ioctl_ops, then you should set .unlocked_ioctl to video_ioctl2 in your v4l2_file_operations struct. @@ -909,8 +904,7 @@ struct v4l2_fh struct v4l2_fh provides a way to easily keep file handle specific data that is used by the V4L2 framework. New drivers must use struct v4l2_fh -since it is also used to implement priority handling (VIDIOC_G/S_PRIORITY) -if the video_device flag V4L2_FL_USE_FH_PRIO is also set. +since it is also used to implement priority handling (VIDIOC_G/S_PRIORITY). The users of v4l2_fh (in the V4L2 framework, not the driver) know whether a driver uses v4l2_fh as its file->private_data pointer by diff --git a/Documentation/video4linux/v4l2-pci-skeleton.c b/Documentation/video4linux/v4l2-pci-skeleton.c index 46904fe49609372eee7b6e16474fc2ac5fa1f5c1..006721e43b2a81f4ed4809696cc85c2e7326efda 100644 --- a/Documentation/video4linux/v4l2-pci-skeleton.c +++ b/Documentation/video4linux/v4l2-pci-skeleton.c @@ -883,11 +883,6 @@ static int skeleton_probe(struct pci_dev *pdev, const struct pci_device_id *ent) vdev->v4l2_dev = &skel->v4l2_dev; /* Supported SDTV standards, if any */ vdev->tvnorms = SKEL_TVNORMS; - /* If this bit is set, then the v4l2 core will provide the support - * for the VIDIOC_G/S_PRIORITY ioctls. This flag will eventually - * go away once all drivers have been converted to use struct v4l2_fh. - */ - set_bit(V4L2_FL_USE_FH_PRIO, &vdev->flags); video_set_drvdata(vdev, skel); ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1); diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index 68cda1fc3d523810f55e2de960e72bce4808bf0f..beae3fde075ee50bd790e3c8acebbaa93d0e9fc7 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -148,9 +148,9 @@ of banks, as set via the KVM_X86_SETUP_MCE ioctl. 4.4 KVM_CHECK_EXTENSION -Capability: basic +Capability: basic, KVM_CAP_CHECK_EXTENSION_VM for vm ioctl Architectures: all -Type: system ioctl +Type: system ioctl, vm ioctl Parameters: extension identifier (KVM_CAP_*) Returns: 0 if unsupported; 1 (or some other positive integer) if supported @@ -160,6 +160,9 @@ receives an integer that describes the extension availability. Generally 0 means no and 1 means yes, but some extensions may report additional information in the integer return value. +Based on their initialization different VMs may have different capabilities. +It is thus encouraged to use the vm ioctl to query for capabilities (available +with KVM_CAP_CHECK_EXTENSION_VM on the vm fd) 4.5 KVM_GET_VCPU_MMAP_SIZE @@ -1892,7 +1895,8 @@ registers, find a list below: PPC | KVM_REG_PPC_PID | 64 PPC | KVM_REG_PPC_ACOP | 64 PPC | KVM_REG_PPC_VRSAVE | 32 - PPC | KVM_REG_PPC_LPCR | 64 + PPC | KVM_REG_PPC_LPCR | 32 + PPC | KVM_REG_PPC_LPCR_64 | 64 PPC | KVM_REG_PPC_PPR | 64 PPC | KVM_REG_PPC_ARCH_COMPAT | 32 PPC | KVM_REG_PPC_DABRX | 32 @@ -2677,8 +2681,8 @@ The 'data' member contains, in its first 'len' bytes, the value as it would appear if the VCPU performed a load or store of the appropriate width directly to the byte array. -NOTE: For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_DCR, - KVM_EXIT_PAPR and KVM_EXIT_EPR the corresponding +NOTE: For KVM_EXIT_IO, KVM_EXIT_MMIO, KVM_EXIT_OSI, KVM_EXIT_PAPR and + KVM_EXIT_EPR the corresponding operations are complete (and guest state is consistent) only after userspace has re-entered the kernel with KVM_RUN. The kernel side will first finish incomplete operations and then check for pending signals. Userspace @@ -2749,7 +2753,7 @@ Principles of Operation Book in the Chapter for Dynamic Address Translation __u8 is_write; } dcr; -powerpc specific. +Deprecated - was used for 440 KVM. /* KVM_EXIT_OSI */ struct { @@ -2931,8 +2935,8 @@ The fields in each entry are defined as follows: this function/index combination -6. Capabilities that can be enabled ------------------------------------ +6. Capabilities that can be enabled on vCPUs +-------------------------------------------- There are certain capabilities that change the behavior of the virtual CPU or the virtual machine when enabled. To enable them, please see section 4.37. @@ -3091,3 +3095,43 @@ Parameters: none This capability enables the in-kernel irqchip for s390. Please refer to "4.24 KVM_CREATE_IRQCHIP" for details. + +7. Capabilities that can be enabled on VMs +------------------------------------------ + +There are certain capabilities that change the behavior of the virtual +machine when enabled. To enable them, please see section 4.37. Below +you can find a list of capabilities and what their effect on the VM +is when enabling them. + +The following information is provided along with the description: + + Architectures: which instruction set architectures provide this ioctl. + x86 includes both i386 and x86_64. + + Parameters: what parameters are accepted by the capability. + + Returns: the return value. General error numbers (EBADF, ENOMEM, EINVAL) + are not detailed, but errors with specific meanings are. + + +7.1 KVM_CAP_PPC_ENABLE_HCALL + +Architectures: ppc +Parameters: args[0] is the sPAPR hcall number + args[1] is 0 to disable, 1 to enable in-kernel handling + +This capability controls whether individual sPAPR hypercalls (hcalls) +get handled by the kernel or not. Enabling or disabling in-kernel +handling of an hcall is effective across the VM. On creation, an +initial set of hcalls are enabled for in-kernel handling, which +consists of those hcalls for which in-kernel handlers were implemented +before this capability was implemented. If disabled, the kernel will +not to attempt to handle the hcall, but will always exit to userspace +to handle it. Note that it may not make sense to enable some and +disable others of a group of related hcalls, but KVM does not prevent +userspace from doing that. + +If the hcall number specified is not one that has an in-kernel +implementation, the KVM_ENABLE_CAP ioctl will fail with an EINVAL +error. diff --git a/Documentation/w1/slaves/w1_ds2406 b/Documentation/w1/slaves/w1_ds2406 new file mode 100644 index 0000000000000000000000000000000000000000..8137fe6f6c3d11534458457ade422d8a84fd8dac --- /dev/null +++ b/Documentation/w1/slaves/w1_ds2406 @@ -0,0 +1,25 @@ +w1_ds2406 kernel driver +======================= + +Supported chips: + * Maxim DS2406 (and other family 0x12) addressable switches + +Author: Scott Alfter + +Description +----------- + +The w1_ds2406 driver allows connected devices to be switched on and off. +These chips also provide 128 bytes of OTP EPROM, but reading/writing it is +not supported. In TSOC-6 form, the DS2406 provides two switch outputs and +can be provided with power on a dedicated input. In TO-92 form, it provides +one output and uses parasitic power only. + +The driver provides two sysfs files. state is readable; it gives the +current state of each switch, with PIO A in bit 0 and PIO B in bit 1. The +driver ORs this state with 0x30, so shell scripts get an ASCII 0/1/2/3 to +work with. output is writable; bits 0 and 1 control PIO A and B, +respectively. Bits 2-7 are ignored, so it's safe to write ASCII data. + +CRCs are checked on read and write. Failed checks cause an I/O error to be +returned. On a failed write, the switch status is not changed. diff --git a/Documentation/watchdog/watchdog-api.txt b/Documentation/watchdog/watchdog-api.txt index eb7132ed8bbcb7650bdc20e6a43e3c9222d6621b..b3a701f48118976a285259b0db73fc9d1a4948fa 100644 --- a/Documentation/watchdog/watchdog-api.txt +++ b/Documentation/watchdog/watchdog-api.txt @@ -118,7 +118,7 @@ resets. Note that the pretimeout is the number of seconds before the time when the timeout will go off. It is not the number of seconds until the pretimeout. So, for instance, if you set the timeout to 60 seconds -and the pretimeout to 10 seconds, the pretimout will go of in 50 +and the pretimeout to 10 seconds, the pretimeout will go off in 50 seconds. Setting a pretimeout to zero disables it. There is also a get function for getting the pretimeout: diff --git a/Documentation/zh_CN/SubmittingDrivers b/Documentation/zh_CN/SubmittingDrivers index 5889f8df6312ab1299a8a0796440bd40713a1c49..d313f5d8448d704bfb789e6a72f2d8b10c4cba92 100644 --- a/Documentation/zh_CN/SubmittingDrivers +++ b/Documentation/zh_CN/SubmittingDrivers @@ -150,10 +150,6 @@ LWN.net: 将旧版内核的驱动程序移植到 2.6 版： http://lwn.net/Articles/driver-porting/ -KernelTrap： - Linux 内核的最新动态以及开发者访谈 - http://kerneltrap.org/ - 内核新手(KernelNewbies): 为新的内核开发者提供文档和帮助 http://kernelnewbies.org/ diff --git a/Documentation/zh_CN/video4linux/v4l2-framework.txt b/Documentation/zh_CN/video4linux/v4l2-framework.txt index 0da95dbaef341e08daa9033e4cf9a5d906804130..2b828e631e318c3cf2ace087b732bcaa18cb06ff 100644 --- a/Documentation/zh_CN/video4linux/v4l2-framework.txt +++ b/Documentation/zh_CN/video4linux/v4l2-framework.txt @@ -580,11 +580,6 @@ release()回调必须被设置，且在最后一个 video_device 用户退出之 v4l2_device 无法与特定的 PCI 设备关联，所有没有设置父设备。但当 video_device 配置后，就知道使用哪个父 PCI 设备了。 -- flags：可选。如果你要让框架处理设置 VIDIOC_G/S_PRIORITY ioctls， - 请设置 V4L2_FL_USE_FH_PRIO。这要求你使用 v4l2_fh 结构体。 - 一旦所有驱动使用了核心的优先级处理，最终这个标志将消失。但现在它 - 必须被显式设置。 - 如果你使用 v4l2_ioctl_ops，则应该在 v4l2_file_operations 结构体中 设置 .unlocked_ioctl 指向 video_ioctl2。 @@ -789,7 +784,7 @@ v4l2_fh 结构体 ------------- v4l2_fh 结构体提供一个保存用于 V4L2 框架的文件句柄特定数据的简单方法。 -如果 video_device 的 flag 设置了 V4L2_FL_USE_FH_PRIO 标志，新驱动 +如果 video_device 标志，新驱动 必须使用 v4l2_fh 结构体，因为它也用于实现优先级处理（VIDIOC_G/S_PRIORITY）。 v4l2_fh 的用户（位于 V4l2 框架中，并非驱动）可通过测试 diff --git a/MAINTAINERS b/MAINTAINERS index 1acc624ecfd7f81b826664121b1f16713464f7d2..aefa94841ff3eee6cc124221ab4bcb56dd7d4ca3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -150,6 +150,14 @@ L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/53c700* +6LOWPAN GENERIC (BTLE/IEEE 802.15.4) +M: Alexander Aring +L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers) +L: linux-bluetooth@vger.kernel.org +S: Maintained +F: net/6lowpan/ +F: include/net/6lowpan.h + 6PACK NETWORK DRIVER FOR AX.25 M: Andreas Koensgen L: linux-hams@vger.kernel.org @@ -516,6 +524,16 @@ S: Supported F: fs/aio.c F: include/linux/*aio*.h +AIRSPY MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/airspy/ + ALCATEL SPEEDTOUCH USB DRIVER M: Duncan Sands L: linux-usb@vger.kernel.org @@ -579,7 +597,7 @@ AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER M: Thomas Dahlmann L: linux-geode@lists.infradead.org (moderated for non-subscribers) S: Supported -F: drivers/usb/gadget/amd5536udc.* +F: drivers/usb/gadget/udc/amd5536udc.* AMD GEODE PROCESSOR/CHIPSET SUPPORT P: Andres Salomon @@ -588,7 +606,7 @@ W: http://www.amd.com/us-en/ConnectivitySolutions/TechnicalResources/0,,50_2334_ S: Supported F: drivers/char/hw_random/geode-rng.c F: drivers/crypto/geode* -F: drivers/video/geode/ +F: drivers/video/fbdev/geode/ F: arch/x86/include/asm/geode.h AMD IOMMU (AMD-VI) @@ -603,7 +621,7 @@ AMD MICROCODE UPDATE SUPPORT M: Andreas Herrmann L: amd64-microcode@amd64.org S: Maintained -F: arch/x86/kernel/microcode_amd.c +F: arch/x86/kernel/cpu/microcode/amd* AMD XGBE DRIVER M: Tom Lendacky @@ -701,6 +719,14 @@ S: Maintained F: drivers/net/appletalk/ F: net/appletalk/ +APPLIED MICRO (APM) X-GENE SOC ETHERNET DRIVER +M: Iyappan Subramanian +M: Keyur Chudgar +M: Ravi Patel +S: Supported +F: drivers/net/ethernet/apm/xgene/ +F: Documentation/devicetree/bindings/net/apm-xgene-enet.txt + APTINA CAMERA SENSOR PLL M: Laurent Pinchart L: linux-media@vger.kernel.org @@ -717,8 +743,8 @@ F: drivers/ata/pata_arasan_cf.c ARC FRAMEBUFFER DRIVER M: Jaya Kumar S: Maintained -F: drivers/video/arcfb.c -F: drivers/video/fb_defio.c +F: drivers/video/fbdev/arcfb.c +F: drivers/video/fbdev/core/fb_defio.c ARM MFM AND FLOPPY DRIVERS M: Ian Molton @@ -757,7 +783,7 @@ F: sound/arm/aaci.* ARM PRIMECELL CLCD PL110 DRIVER M: Russell King S: Maintained -F: drivers/video/amba-clcd.* +F: drivers/video/fbdev/amba-clcd.* ARM PRIMECELL KMI PL050 DRIVER M: Russell King @@ -893,7 +919,7 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://git.kernel.org/pub/scm/linux/kernel/git/baohua/linux.git S: Maintained F: arch/arm/mach-prima2/ -F: drivers/clk/clk-prima2.c +F: drivers/clk/sirf/ F: drivers/clocksource/timer-prima2.c F: drivers/clocksource/timer-marco.c N: [^a-z]sirf @@ -967,6 +993,14 @@ F: arch/arm/mach-pxa/hx4700.c F: arch/arm/mach-pxa/include/mach/hx4700.h F: sound/soc/pxa/hx4700.c +ARM/HISILICON SOC SUPPORT +M: Wei Xu +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +W: http://www.hisilicon.com +S: Supported +T: git git://github.com/hisilicon/linux-hisi.git +F: arch/arm/mach-hisi/ + ARM/HP JORNADA 7XX MACHINE SUPPORT M: Kristoffer Ericson W: www.jlime.com @@ -1098,14 +1132,13 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-berlin/ -ARM/Marvell Dove/Kirkwood/MV78xx0/Orion SOC support +ARM/Marvell Dove/MV78xx0/Orion SOC support M: Jason Cooper M: Andrew Lunn M: Sebastian Hesselbarth L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-dove/ -F: arch/arm/mach-kirkwood/ F: arch/arm/mach-mv78xx0/ F: arch/arm/mach-orion5x/ F: arch/arm/plat-orion/ @@ -1139,6 +1172,7 @@ M: Linus Walleij L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: arch/arm/mach-nomadik/ +F: drivers/pinctrl/nomadik/ F: drivers/i2c/busses/i2c-nomadik.c T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik.git @@ -1154,14 +1188,13 @@ M: Daniel Walker M: Bryan Huntsman L: linux-arm-msm@vger.kernel.org F: arch/arm/mach-msm/ -F: drivers/video/msm/ +F: drivers/video/fbdev/msm/ F: drivers/mmc/host/msm_sdcc.c F: drivers/mmc/host/msm_sdcc.h F: drivers/tty/serial/msm_serial.h F: drivers/tty/serial/msm_serial.c F: drivers/*/pm8???-* -F: drivers/mfd/ssbi/ -F: include/linux/mfd/pm8xxx/ +F: drivers/mfd/ssbi.c T: git git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm.git S: Maintained @@ -1358,6 +1391,7 @@ F: drivers/pinctrl/pinctrl-st.c F: drivers/media/rc/st_rc.c F: drivers/i2c/busses/i2c-st.c F: drivers/tty/serial/st-asc.c +F: drivers/mmc/host/sdhci-st.c ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT M: Lennert Buytenhek @@ -1388,7 +1422,7 @@ F: drivers/mtd/nand/nuc900_nand.c F: drivers/rtc/rtc-nuc900.c F: drivers/spi/spi-nuc900.c F: drivers/usb/host/ehci-w90x900.c -F: drivers/video/nuc900fb.c +F: drivers/video/fbdev/nuc900fb.c ARM/U300 MACHINE SUPPORT M: Linus Walleij @@ -1417,7 +1451,8 @@ F: drivers/mfd/abx500* F: drivers/mfd/ab8500* F: drivers/mfd/dbx500* F: drivers/mfd/db8500* -F: drivers/pinctrl/pinctrl-nomadik* +F: drivers/pinctrl/nomadik/pinctrl-ab* +F: drivers/pinctrl/nomadik/pinctrl-nomadik* F: drivers/rtc/rtc-ab8500.c F: drivers/rtc/rtc-pl031.c T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson.git @@ -1457,9 +1492,9 @@ F: drivers/rtc/rtc-vt8500.c F: drivers/tty/serial/vt8500_serial.c F: drivers/usb/host/ehci-platform.c F: drivers/usb/host/uhci-platform.c -F: drivers/video/vt8500lcdfb.* -F: drivers/video/wm8505fb* -F: drivers/video/wmt_ge_rops.* +F: drivers/video/fbdev/vt8500lcdfb.* +F: drivers/video/fbdev/wm8505fb* +F: drivers/video/fbdev/wmt_ge_rops.* ARM/ZIPIT Z2 SUPPORT M: Marek Vasut @@ -1649,7 +1684,7 @@ ATMEL LCDFB DRIVER M: Nicolas Ferre L: linux-fbdev@vger.kernel.org S: Maintained -F: drivers/video/atmel_lcdfb.c +F: drivers/video/fbdev/atmel_lcdfb.c F: include/video/atmel_lcdc.h ATMEL MACB ETHERNET DRIVER @@ -1673,7 +1708,7 @@ ATMEL USBA UDC DRIVER M: Nicolas Ferre L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Supported -F: drivers/usb/gadget/atmel_usba_udc.* +F: drivers/usb/gadget/udc/atmel_usba_udc.* ATMEL WIRELESS DRIVER M: Simon Kelley @@ -1796,6 +1831,13 @@ W: http://bcache.evilpiepirate.org S: Maintained: F: drivers/md/bcache/ +BECEEM BCS200/BCS220-3/BCSM250 WIMAX SUPPORT +M: Kevin McKinney +M: Matthias Beyer +L: devel@driverdev.osuosl.org +S: Maintained +F: drivers/staging/bcm* + BEFS FILE SYSTEM S: Orphan F: Documentation/filesystems/befs.txt @@ -1914,6 +1956,13 @@ S: Supported F: drivers/net/bonding/ F: include/uapi/linux/if_bonding.h +BPF (Safe dynamic programs and tools) +M: Alexei Starovoitov +L: netdev@vger.kernel.org +L: linux-kernel@vger.kernel.org +S: Supported +F: kernel/bpf/ + BROADCOM B44 10/100 ETHERNET DRIVER M: Gary Zambrano L: netdev@vger.kernel.org @@ -1927,7 +1976,8 @@ S: Supported F: drivers/net/ethernet/broadcom/genet/ BROADCOM BNX2 GIGABIT ETHERNET DRIVER -M: Michael Chan +M: Sony Chacko +M: Dept-HSGLinuxNICDev@qlogic.com L: netdev@vger.kernel.org S: Supported F: drivers/net/ethernet/broadcom/bnx2.* @@ -1950,7 +2000,7 @@ F: arch/arm/boot/dts/bcm113* F: arch/arm/boot/dts/bcm216* F: arch/arm/boot/dts/bcm281* F: arch/arm/configs/bcm_defconfig -F: drivers/mmc/host/sdhci_bcm_kona.c +F: drivers/mmc/host/sdhci-bcm-kona.c F: drivers/clocksource/bcm_kona_timer.c BROADCOM BCM2835 ARM ARCHICTURE @@ -1971,8 +2021,16 @@ F: arch/arm/mach-bcm/bcm_5301x.c F: arch/arm/boot/dts/bcm5301x.dtsi F: arch/arm/boot/dts/bcm470* +BROADCOM BCM7XXX ARM ARCHITECTURE +M: Marc Carino +M: Brian Norris +L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) +S: Maintained +F: arch/arm/mach-bcm/*brcmstb* +F: arch/arm/boot/dts/bcm7*.dts* + BROADCOM TG3 GIGABIT ETHERNET DRIVER -M: Nithin Nayak Sujir +M: Prashant Sreedharan M: Michael Chan L: netdev@vger.kernel.org S: Supported @@ -1989,13 +2047,13 @@ S: Supported F: drivers/net/wireless/brcm80211/ BROADCOM BNX2FC 10 GIGABIT FCOE DRIVER -M: Eddie Wai +M: QLogic-Storage-Upstream@qlogic.com L: linux-scsi@vger.kernel.org S: Supported F: drivers/scsi/bnx2fc/ BROADCOM BNX2I 1/10 GIGABIT iSCSI DRIVER -M: Eddie Wai +M: QLogic-Storage-Upstream@qlogic.com L: linux-scsi@vger.kernel.org S: Supported F: drivers/scsi/bnx2i/ @@ -2292,12 +2350,6 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/ethernet/cirrus/ep93xx_eth.c -CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER -M: Lennert Buytenhek -L: linux-usb@vger.kernel.org -S: Maintained -F: drivers/usb/host/ohci-ep93xx.c - CIRRUS LOGIC AUDIO CODEC DRIVERS M: Brian Austin M: Paul Handrigan @@ -2382,7 +2434,7 @@ W: http://linux-cifs.samba.org/ Q: http://patchwork.ozlabs.org/project/linux-cifs-client/list/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6.git S: Supported -F: Documentation/filesystems/cifs.txt +F: Documentation/filesystems/cifs/ F: fs/cifs/ COMPACTPCI HOTPLUG CORE @@ -2523,8 +2575,8 @@ F: arch/x86/kernel/cpuid.c F: arch/x86/kernel/msr.c CPU POWER MONITORING SUBSYSTEM -M: Dominik Brodowski M: Thomas Renninger +L: linux-pm@vger.kernel.org S: Maintained F: tools/power/cpupower/ @@ -2659,7 +2711,7 @@ M: Russell King L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.arm.linux.org.uk/ S: Maintained -F: drivers/video/cyber2000fb.* +F: drivers/video/fbdev/cyber2000fb.* CYCLADES ASYNC MUX DRIVER W: http://www.cyclades.com/ @@ -2859,6 +2911,7 @@ F: drivers/staging/dgnc/ DIGI EPCA PCI PRODUCTS M: Lidza Louina M: Mark Hounschell +M: Daeseok Youn L: driverdev-devel@linuxdriverproject.org S: Maintained F: drivers/staging/dgap/ @@ -2896,7 +2949,7 @@ M: Bernie Thompson L: linux-fbdev@vger.kernel.org S: Maintained W: http://plugable.com/category/projects/udlfb/ -F: drivers/video/udlfb.c +F: drivers/video/fbdev/udlfb.c F: include/video/udlfb.h F: Documentation/fb/udlfb.txt @@ -2915,8 +2968,10 @@ S: Maintained L: linux-media@vger.kernel.org L: dri-devel@lists.freedesktop.org L: linaro-mm-sig@lists.linaro.org -F: drivers/base/dma-buf* +F: drivers/dma-buf/ F: include/linux/dma-buf* +F: include/linux/reservation.h +F: include/linux/*fence.h F: Documentation/dma-buf-sharing.txt T: git git://git.linaro.org/people/sumitsemwal/linux-dma-buf.git @@ -3011,7 +3066,6 @@ L: dri-devel@lists.freedesktop.org T: git git://people.freedesktop.org/~agd5f/linux S: Supported F: drivers/gpu/drm/radeon/ -F: include/drm/radeon* F: include/uapi/drm/radeon* DRM PANEL DRIVERS @@ -3205,26 +3259,12 @@ T: git git://linuxtv.org/anttip/media_tree.git S: Maintained F: drivers/media/tuners/e4000* -EATA-DMA SCSI DRIVER -M: Michael Neuffer -L: linux-eata@i-connect.net -L: linux-scsi@vger.kernel.org -S: Maintained -F: drivers/scsi/eata* - EATA ISA/EISA/PCI SCSI DRIVER M: Dario Ballabio L: linux-scsi@vger.kernel.org S: Maintained F: drivers/scsi/eata.c -EATA-PIO SCSI DRIVER -M: Michael Neuffer -L: linux-eata@i-connect.net -L: linux-scsi@vger.kernel.org -S: Maintained -F: drivers/scsi/eata_pio.* - EC100 MEDIA DRIVER M: Antti Palosaari L: linux-media@vger.kernel.org @@ -3399,7 +3439,7 @@ M: Matt Fleming L: linux-efi@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi.git S: Maintained -F: Documentation/x86/efi-stub.txt +F: Documentation/efi-stub.txt F: arch/ia64/kernel/efi.c F: arch/x86/boot/compressed/eboot.[ch] F: arch/x86/include/asm/efi.h @@ -3420,7 +3460,7 @@ EFIFB FRAMEBUFFER DRIVER L: linux-fbdev@vger.kernel.org M: Peter Jones S: Maintained -F: drivers/video/efifb.c +F: drivers/video/fbdev/efifb.c EFS FILESYSTEM W: http://aeschi.ch.eu.org/efs/ @@ -3485,7 +3525,7 @@ EPSON S1D13XXX FRAMEBUFFER DRIVER M: Kristoffer Ericson S: Maintained T: git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git -F: drivers/video/s1d13xxxfb.c +F: drivers/video/fbdev/s1d13xxxfb.c F: include/video/s1d13xxxfb.h ETHERNET BRIDGE @@ -3563,7 +3603,7 @@ M: Donghwa Lee M: Kyungmin Park L: linux-fbdev@vger.kernel.org S: Maintained -F: drivers/video/exynos/exynos_mipi* +F: drivers/video/fbdev/exynos/exynos_mipi* F: include/video/exynos_mipi* F71805F HARDWARE MONITORING DRIVER @@ -3742,7 +3782,7 @@ FREESCALE DIU FRAMEBUFFER DRIVER M: Timur Tabi L: linux-fbdev@vger.kernel.org S: Maintained -F: drivers/video/fsl-diu-fb.* +F: drivers/video/fbdev/fsl-diu-fb.* FREESCALE DMA DRIVER M: Li Yang @@ -3764,7 +3804,7 @@ L: linux-fbdev@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained F: include/linux/platform_data/video-imxfb.h -F: drivers/video/imxfb.c +F: drivers/video/fbdev/imxfb.c FREESCALE SOC FS_ENET DRIVER M: Pantelis Antoniou @@ -3786,7 +3826,7 @@ M: Li Yang L: linux-usb@vger.kernel.org L: linuxppc-dev@lists.ozlabs.org S: Maintained -F: drivers/usb/gadget/fsl* +F: drivers/usb/gadget/udc/fsl* FREESCALE QUICC ENGINE UCC ETHERNET DRIVER M: Li Yang @@ -3985,6 +4025,12 @@ F: Documentation/isdn/README.gigaset F: drivers/isdn/gigaset/ F: include/uapi/linux/gigaset_dev.h +GO7007 MPEG CODEC +M: Hans Verkuil +L: linux-media@vger.kernel.org +S: Maintained +F: drivers/media/usb/go7007/ + GPIO SUBSYSTEM M: Linus Walleij M: Alexandre Courbot @@ -3993,7 +4039,8 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio.git S: Maintained F: Documentation/gpio/ F: drivers/gpio/ -F: include/linux/gpio* +F: include/linux/gpio/ +F: include/linux/gpio.h F: include/asm-generic/gpio.h GRE DEMULTIPLEXER DRIVER @@ -4183,7 +4230,7 @@ M: Ferenc Bakonyi L: linux-nvidia@lists.surfsouth.com W: http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml S: Maintained -F: drivers/video/hgafb.c +F: drivers/video/fbdev/hgafb.c HIBERNATION (aka Software Suspend, aka swsusp) M: "Rafael J. Wysocki" @@ -4213,7 +4260,7 @@ L: linux-kernel@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core S: Maintained F: Documentation/timers/ -F: kernel/hrtimer.c +F: kernel/time/hrtimer.c F: kernel/time/clockevents.c F: kernel/time/tick*.* F: kernel/time/timer_*.c @@ -4325,7 +4372,7 @@ F: drivers/hv/ F: drivers/input/serio/hyperv-keyboard.c F: drivers/net/hyperv/ F: drivers/scsi/storvsc_drv.c -F: drivers/video/hyperv_fb.c +F: drivers/video/fbdev/hyperv_fb.c F: include/linux/hyperv.h F: tools/hv/ @@ -4469,10 +4516,7 @@ S: Supported F: drivers/scsi/ibmvscsi/ibmvfc* IBM ServeRAID RAID DRIVER -P: Jack Hammer -M: Dave Jeffery -W: http://www.developer.ibm.com/welcome/netfinity/serveraid.html -S: Supported +S: Orphan F: drivers/scsi/ips.* ICH LPC AND GPIO DRIVER @@ -4584,7 +4628,7 @@ F: security/integrity/ima/ IMS TWINTURBO FRAMEBUFFER DRIVER L: linux-fbdev@vger.kernel.org S: Orphan -F: drivers/video/imsttfb.c +F: drivers/video/fbdev/imsttfb.c INFINIBAND SUBSYSTEM M: Roland Dreier @@ -4651,13 +4695,13 @@ M: Maik Broemme L: linux-fbdev@vger.kernel.org S: Maintained F: Documentation/fb/intelfb.txt -F: drivers/video/intelfb/ +F: drivers/video/fbdev/intelfb/ INTEL 810/815 FRAMEBUFFER DRIVER M: Antonino Daplas L: linux-fbdev@vger.kernel.org S: Maintained -F: drivers/video/i810/ +F: drivers/video/fbdev/i810/ INTEL MENLOW THERMAL DRIVER M: Sujith Thomas @@ -4669,8 +4713,8 @@ F: drivers/platform/x86/intel_menlow.c INTEL IA32 MICROCODE UPDATE SUPPORT M: Tigran Aivazian S: Maintained -F: arch/x86/kernel/microcode_core.c -F: arch/x86/kernel/microcode_intel.c +F: arch/x86/kernel/cpu/microcode/core* +F: arch/x86/kernel/cpu/microcode/intel* INTEL I/OAT DMA DRIVER M: Dan Williams @@ -5075,13 +5119,6 @@ S: Maintained F: Documentation/hwmon/k8temp F: drivers/hwmon/k8temp.c -KTAP -M: Jovi Zhangwei -W: http://www.ktap.org -L: ktap@freelists.org -S: Maintained -F: drivers/staging/ktap/ - KCONFIG M: "Yann E. MORIN" L: linux-kbuild@vger.kernel.org @@ -5136,7 +5173,6 @@ L: linux-nfs@vger.kernel.org W: http://nfs.sourceforge.net/ S: Supported F: fs/nfsd/ -F: include/linux/nfsd/ F: include/uapi/linux/nfsd/ F: fs/lockd/ F: fs/nfs_common/ @@ -5391,6 +5427,7 @@ F: arch/powerpc/boot/rs6000.h LINUX FOR POWERPC (32-BIT AND 64-BIT) M: Benjamin Herrenschmidt M: Paul Mackerras +M: Michael Ellerman W: http://www.penguinppc.org/ L: linuxppc-dev@lists.ozlabs.org Q: http://patchwork.ozlabs.org/project/linuxppc-dev/list/ @@ -5432,16 +5469,17 @@ F: arch/powerpc/*/*/*virtex* LINUX FOR POWERPC EMBEDDED PPC8XX M: Vitaly Bordug -M: Marcelo Tosatti W: http://www.penguinppc.org/ L: linuxppc-dev@lists.ozlabs.org S: Maintained F: arch/powerpc/platforms/8xx/ LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX +M: Scott Wood M: Kumar Gala W: http://www.penguinppc.org/ L: linuxppc-dev@lists.ozlabs.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/scottwood/linux.git S: Maintained F: arch/powerpc/platforms/83xx/ F: arch/powerpc/platforms/85xx/ @@ -5664,16 +5702,6 @@ F: Documentation/networking/mac80211-injection.txt F: include/net/mac80211.h F: net/mac80211/ -MAC80211 PID RATE CONTROL -M: Stefano Brivio -M: Mattias Nissler -L: linux-wireless@vger.kernel.org -W: http://wireless.kernel.org/en/developers/Documentation/mac80211/RateControl/PID -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211.git -T: git git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next.git -S: Maintained -F: net/mac80211/rc80211_pid* - MACVLAN DRIVER M: Patrick McHardy L: netdev@vger.kernel.org @@ -5718,7 +5746,8 @@ S: Maintained F: drivers/net/ethernet/marvell/mvneta.* MARVELL MWIFIEX WIRELESS DRIVER -M: Bing Zhao +M: Amitkumar Karwar +M: Avinash Patil L: linux-wireless@vger.kernel.org S: Maintained F: drivers/net/wireless/mwifiex/ @@ -5737,7 +5766,7 @@ F: drivers/mmc/host/mvsdio.* MATROX FRAMEBUFFER DRIVER L: linux-fbdev@vger.kernel.org S: Orphan -F: drivers/video/matrox/matroxfb_* +F: drivers/video/fbdev/matrox/matroxfb_* F: include/uapi/linux/matroxfb.h MAX16065 HARDWARE MONITOR DRIVER @@ -5864,7 +5893,6 @@ F: drivers/clocksource/metag_generic.c F: drivers/irqchip/irq-metag.c F: drivers/irqchip/irq-metag-ext.c F: drivers/tty/metag_da.c -F: fs/imgdafs/ MICROBLAZE ARCHITECTURE M: Michal Simek @@ -5964,9 +5992,9 @@ W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ T: git git://linuxtv.org/anttip/media_tree.git S: Maintained -F: drivers/staging/media/msi3101/msi001* +F: drivers/media/tuners/msi001* -MSI3101 MEDIA DRIVER +MSI2500 MEDIA DRIVER M: Antti Palosaari L: linux-media@vger.kernel.org W: http://linuxtv.org/ @@ -5974,7 +6002,7 @@ W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ T: git git://linuxtv.org/anttip/media_tree.git S: Maintained -F: drivers/staging/media/msi3101/sdr-msi3101* +F: drivers/media/usb/msi2500/ MT9M032 APTINA SENSOR DRIVER M: Laurent Pinchart @@ -6011,8 +6039,7 @@ F: include/media/mt9v032.h MULTIFUNCTION DEVICES (MFD) M: Samuel Ortiz M: Lee Jones -T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next.git -T: git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-fixes.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd.git S: Supported F: drivers/mfd/ F: include/linux/mfd/ @@ -6379,8 +6406,8 @@ NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER M: Antonino Daplas L: linux-fbdev@vger.kernel.org S: Maintained -F: drivers/video/riva/ -F: drivers/video/nvidia/ +F: drivers/video/fbdev/riva/ +F: drivers/video/fbdev/nvidia/ NVM EXPRESS DRIVER M: Matthew Wilcox @@ -6450,14 +6477,14 @@ M: Tomi Valkeinen L: linux-fbdev@vger.kernel.org L: linux-omap@vger.kernel.org S: Maintained -F: drivers/video/omap/ +F: drivers/video/fbdev/omap/ OMAP DISPLAY SUBSYSTEM and FRAMEBUFFER SUPPORT (DSS2) M: Tomi Valkeinen L: linux-omap@vger.kernel.org L: linux-fbdev@vger.kernel.org S: Maintained -F: drivers/video/omap2/ +F: drivers/video/fbdev/omap2/ F: Documentation/arm/OMAP/DSS OMAP HARDWARE SPINLOCK SUPPORT @@ -6498,11 +6525,12 @@ L: linux-omap@vger.kernel.org S: Maintained F: arch/arm/mach-omap2/omap_hwmod_44xx_data.c -OMAP IMAGE SIGNAL PROCESSOR (ISP) +OMAP IMAGING SUBSYSTEM (OMAP3 ISP and OMAP4 ISS) M: Laurent Pinchart L: linux-media@vger.kernel.org S: Maintained F: drivers/media/platform/omap3isp/ +F: drivers/staging/media/omap4iss/ OMAP USB SUPPORT M: Felipe Balbi @@ -6748,7 +6776,7 @@ F: drivers/char/agp/parisc-agp.c F: drivers/input/serio/gscps2.c F: drivers/parport/parport_gsc.* F: drivers/tty/serial/8250/8250_gsc.c -F: drivers/video/sti* +F: drivers/video/fbdev/sti* F: drivers/video/console/sti* F: drivers/video/logo/logo_parisc* @@ -6860,6 +6888,12 @@ S: Maintained F: Documentation/devicetree/bindings/pci/host-generic-pci.txt F: drivers/pci/host/pci-host-generic.c +PCIE DRIVER FOR ST SPEAR13XX +M: Mohit Kumar +L: linux-pci@vger.kernel.org +S: Maintained +F: drivers/pci/host/*spear* + PCMCIA SUBSYSTEM P: Linux PCMCIA Team L: linux-pcmcia@lists.infradead.org @@ -6949,9 +6983,9 @@ M: Jamie Iles L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) T: git git://github.com/jamieiles/linux-2.6-ji.git S: Supported +F: arch/arm/boot/dts/picoxcell* F: arch/arm/mach-picoxcell/ -F: drivers/*/picoxcell* -F: drivers/*/*/picoxcell* +F: drivers/crypto/picoxcell* PIN CONTROL SUBSYSTEM M: Linus Walleij @@ -6977,9 +7011,7 @@ M: Thomas Abraham L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers) S: Maintained -F: drivers/pinctrl/pinctrl-exynos.* -F: drivers/pinctrl/pinctrl-s3c* -F: drivers/pinctrl/pinctrl-samsung.* +F: drivers/pinctrl/samsung/ PIN CONTROLLER - ST SPEAR M: Viresh Kumar @@ -7003,7 +7035,7 @@ S: Maintained T: git git://github.com/gxt/linux.git F: drivers/input/serio/i8042-unicore32io.h F: drivers/i2c/busses/i2c-puv3.c -F: drivers/video/fb-puv3.c +F: drivers/video/fbdev/fb-puv3.c F: drivers/rtc/rtc-puv3.c PMBUS HARDWARE MONITORING DRIVERS @@ -7027,6 +7059,7 @@ F: drivers/scsi/pmcraid.* PMC SIERRA PM8001 DRIVER M: xjtuwjp@gmail.com M: lindar_liu@usish.com +L: pmchba@pmcs.com L: linux-scsi@vger.kernel.org S: Supported F: drivers/scsi/pm8001/ @@ -7035,14 +7068,16 @@ POSIX CLOCKS and TIMERS M: Thomas Gleixner L: linux-kernel@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git timers/core -S: Supported +S: Maintained F: fs/timerfd.c F: include/linux/timer* -F: kernel/*timer* +F: kernel/time/*timer* POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS +M: Sebastian Reichel M: Dmitry Eremin-Solenikov M: David Woodhouse +L: linux-pm@vger.kernel.org T: git git://git.infradead.org/battery-2.6.git S: Maintained F: include/linux/power_supply.h @@ -7174,7 +7209,7 @@ F: drivers/ptp/* F: include/linux/ptp_cl* PTRACE SUPPORT -M: Roland McGrath +M: Roland McGrath M: Oleg Nesterov S: Maintained F: include/asm-generic/syscall.h @@ -7224,7 +7259,7 @@ S: Maintained F: arch/arm/mach-pxa/ F: drivers/pcmcia/pxa2xx* F: drivers/spi/spi-pxa2xx* -F: drivers/usb/gadget/pxa2* +F: drivers/usb/gadget/udc/pxa2* F: include/sound/pxa2xx-lib.h F: sound/arm/pxa* F: sound/soc/pxa/ @@ -7233,7 +7268,7 @@ PXA3xx NAND FLASH DRIVER M: Ezequiel Garcia L: linux-mtd@lists.infradead.org S: Maintained -F: drivers/mtd/nand/pxa3xx-nand.c +F: drivers/mtd/nand/pxa3xx_nand.c MMP SUPPORT M: Eric Miao @@ -7381,7 +7416,7 @@ RADEON FRAMEBUFFER DISPLAY DRIVER M: Benjamin Herrenschmidt L: linux-fbdev@vger.kernel.org S: Maintained -F: drivers/video/aty/radeon* +F: drivers/video/fbdev/aty/radeon* F: include/uapi/linux/radeonfb.h RADIOSHARK RADIO DRIVER @@ -7403,7 +7438,7 @@ RAGE128 FRAMEBUFFER DISPLAY DRIVER M: Paul Mackerras L: linux-fbdev@vger.kernel.org S: Maintained -F: drivers/video/aty/aty128fb.c +F: drivers/video/fbdev/aty/aty128fb.c RALINK RT2X00 WIRELESS LAN DRIVER P: rt2x00 project @@ -7501,6 +7536,13 @@ F: drivers/rtc/ F: include/linux/rtc.h F: include/uapi/linux/rtc.h +REALTEK AUDIO CODECS +M: Bard Liao +M: Oder Chiou +S: Maintained +F: sound/soc/codecs/rt* +F: include/sound/rt*.h + REISERFS FILE SYSTEM L: reiserfs-devel@vger.kernel.org S: Supported @@ -7610,7 +7652,7 @@ W: http://palosaari.fi/linux/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ T: git git://linuxtv.org/anttip/media_tree.git S: Maintained -F: drivers/staging/media/rtl2832u_sdr/rtl2832_sdr* +F: drivers/media/dvb-frontends/rtl2832_sdr* RTL8180 WIRELESS DRIVER M: "John W. Linville" @@ -7644,7 +7686,7 @@ S3 SAVAGE FRAMEBUFFER DRIVER M: Antonino Daplas L: linux-fbdev@vger.kernel.org S: Maintained -F: drivers/video/savage/ +F: drivers/video/fbdev/savage/ S390 M: Martin Schwidefsky @@ -7767,7 +7809,7 @@ SAMSUNG FRAMEBUFFER DRIVER M: Jingoo Han L: linux-fbdev@vger.kernel.org S: Maintained -F: drivers/video/s3c-fb.c +F: drivers/video/fbdev/s3c-fb.c SAMSUNG MULTIFUNCTION DEVICE DRIVERS M: Sangbeom Kim @@ -7844,6 +7886,11 @@ S: Maintained F: include/linux/mmc/dw_mmc.h F: drivers/mmc/host/dw_mmc* +THUNDERBOLT DRIVER +M: Andreas Noever +S: Maintained +F: drivers/thunderbolt/ + TIMEKEEPING, CLOCKSOURCE CORE, NTP M: John Stultz M: Thomas Gleixner @@ -7979,6 +8026,16 @@ S: Maintained F: drivers/mmc/host/sdhci.* F: drivers/mmc/host/sdhci-pltfm.[ch] +SECURE COMPUTING +M: Kees Cook +T: git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git seccomp +S: Supported +F: kernel/seccomp.c +F: include/uapi/linux/seccomp.h +F: include/linux/seccomp.h +K: \bsecure_computing +K: \bTIF_SECCOMP\b + SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF) M: Anton Vorontsov L: linuxppc-dev@lists.ozlabs.org @@ -8249,7 +8306,7 @@ M: Thomas Winischhofer W: http://www.winischhofer.net/linuxsisvga.shtml S: Maintained F: Documentation/fb/sisfb.txt -F: drivers/video/sis/ +F: drivers/video/fbdev/sis/ F: include/video/sisfb.h SIS USB2VGA DRIVER @@ -8358,7 +8415,7 @@ SMSC UFX6000 and UFX7000 USB to VGA DRIVER M: Steve Glendinning L: linux-fbdev@vger.kernel.org S: Maintained -F: drivers/video/smscufx.c +F: drivers/video/fbdev/smscufx.c SOC-CAMERA V4L2 SUBSYSTEM M: Guennadi Liakhovetski @@ -8374,6 +8431,12 @@ M: Chris Boot S: Maintained F: drivers/leds/leds-net48xx.c +SOFTLOGIC 6x10 MPEG CODEC +M: Ismael Luceno +L: linux-media@vger.kernel.org +S: Supported +F: drivers/media/pci/solo6x10/ + SOFTWARE RAID (Multiple Disks) SUPPORT M: Neil Brown L: linux-raid@vger.kernel.org @@ -8564,37 +8627,12 @@ L: devel@driverdev.osuosl.org S: Supported F: drivers/staging/ -STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS -M: Henk de Groot -S: Odd Fixes -F: drivers/staging/wlags49_h2/ -F: drivers/staging/wlags49_h25/ - -STAGING - ASUS OLED -M: Jakub Schmidtke -S: Odd Fixes -F: drivers/staging/asus_oled/ - STAGING - COMEDI M: Ian Abbott M: H Hartley Sweeten S: Odd Fixes F: drivers/staging/comedi/ -STAGING - CRYSTAL HD VIDEO DECODER -M: Naren Sankar -M: Jarod Wilson -M: Scott Davilla -M: Manu Abraham -S: Odd Fixes -F: drivers/staging/crystalhd/ - -STAGING - ECHO CANCELLER -M: Steve Underwood -M: David Rowe -S: Odd Fixes -F: drivers/staging/echo/ - STAGING - ET131X NETWORK DRIVER M: Mark Einon S: Odd Fixes @@ -8605,16 +8643,6 @@ M: Marek Belisko S: Odd Fixes F: drivers/staging/ft1000/ -STAGING - FRONTIER TRANZPORT AND ALPHATRACK -M: David Täht -S: Odd Fixes -F: drivers/staging/frontier/ - -STAGING - GO7007 MPEG CODEC -M: Hans Verkuil -S: Maintained -F: drivers/staging/media/go7007/ - STAGING - INDUSTRIAL IO M: Jonathan Cameron L: linux-iio@vger.kernel.org @@ -8666,52 +8694,27 @@ L: linux-wireless@vger.kernel.org S: Maintained F: drivers/staging/rtl8723au/ -STAGING - SILICON MOTION SM7XX FRAME BUFFER DRIVER -M: Teddy Wang -S: Odd Fixes -F: drivers/staging/sm7xxfb/ - STAGING - SLICOSS M: Lior Dotan M: Christopher Harrer S: Odd Fixes F: drivers/staging/slicoss/ -STAGING - SOFTLOGIC 6x10 MPEG CODEC -M: Ismael Luceno -S: Supported -F: drivers/staging/media/solo6x10/ - STAGING - SPEAKUP CONSOLE SPEECH DRIVER M: William Hubbs M: Chris Brannon M: Kirk Reiser M: Samuel Thibault -L: speakup@braille.uwo.ca +L: speakup@linux-speakup.org W: http://www.linux-speakup.org/ S: Odd Fixes F: drivers/staging/speakup/ -STAGING - TI DSP BRIDGE DRIVERS -M: Omar Ramirez Luna -S: Odd Fixes -F: drivers/staging/tidspbridge/ - -STAGING - USB ENE SM/MS CARD READER DRIVER -M: Al Cho -S: Odd Fixes -F: drivers/staging/keucr/ - STAGING - VIA VT665X DRIVERS M: Forest Bond S: Odd Fixes F: drivers/staging/vt665?/ -STAGING - WINBOND IS89C35 WLAN USB DRIVER -M: Pavel Machek -S: Odd Fixes -F: drivers/staging/winbond/ - STAGING - XGI Z7,Z9,Z11 PCI DISPLAY DRIVER M: Arnaud Patard S: Odd Fixes @@ -9563,15 +9566,6 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/usb/smsc95xx.* -USB SN9C1xx DRIVER -M: Luca Risolia -L: linux-usb@vger.kernel.org -L: linux-media@vger.kernel.org -T: git git://linuxtv.org/media_tree.git -W: http://www.linux-projects.org -S: Maintained -F: drivers/staging/media/sn9c102/ - USB SUBSYSTEM M: Greg Kroah-Hartman L: linux-usb@vger.kernel.org @@ -9619,8 +9613,8 @@ USB WEBCAM GADGET M: Laurent Pinchart L: linux-usb@vger.kernel.org S: Maintained -F: drivers/usb/gadget/*uvc*.c -F: drivers/usb/gadget/webcam.c +F: drivers/usb/gadget/function/*uvc*.c +F: drivers/usb/gadget/legacy/webcam.c USB WIRELESS RNDIS DRIVER (rndis_wlan) M: Jussi Kivilinna @@ -9685,7 +9679,7 @@ L: linux-fbdev@vger.kernel.org W: http://dev.gentoo.org/~spock/projects/uvesafb/ S: Maintained F: Documentation/fb/uvesafb.txt -F: drivers/video/uvesafb.* +F: drivers/video/fbdev/uvesafb.* VFAT/FAT/MSDOS FILESYSTEM M: OGAWA Hirofumi @@ -9758,7 +9752,7 @@ S: Maintained F: include/linux/via-core.h F: include/linux/via-gpio.h F: include/linux/via_i2c.h -F: drivers/video/via/ +F: drivers/video/fbdev/via/ VIA VELOCITY NETWORK DRIVER M: Francois Romieu @@ -9891,6 +9885,13 @@ M: Pierre Ossman S: Maintained F: drivers/mmc/host/wbsd.* +WACOM PROTOCOL 4 SERIAL TABLETS +M: Julian Squires +M: Hans de Goede +L: linux-input@vger.kernel.org +S: Maintained +F: drivers/input/tablet/wacom_serial4.c + WATCHDOG DEVICE DRIVERS M: Wim Van Sebroeck L: linux-watchdog@vger.kernel.org @@ -10016,7 +10017,7 @@ F: arch/x86/ X86 PLATFORM DRIVERS M: Matthew Garrett L: platform-driver-x86@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git +T: git git://cavan.codon.org.uk/platform-drivers-x86.git S: Maintained F: drivers/platform/x86/ @@ -10078,6 +10079,13 @@ S: Supported F: arch/x86/pci/*xen* F: drivers/pci/*xen* +XEN BLOCK SUBSYSTEM +M: Konrad Rzeszutek Wilk +L: xen-devel@lists.xenproject.org (moderated for non-subscribers) +S: Supported +F: drivers/block/xen-blkback/* +F: drivers/block/xen* + XEN SWIOTLB SUBSYSTEM M: Konrad Rzeszutek Wilk L: xen-devel@lists.xenproject.org (moderated for non-subscribers) diff --git a/Makefile b/Makefile index d0901b46b4bfd15aedfd3a0ccfa2d3c3255ff8fc..e43244263306e0b9321b003a2aede021dcb7cc88 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 -PATCHLEVEL = 16 +PATCHLEVEL = 17 SUBLEVEL = 0 -EXTRAVERSION = +EXTRAVERSION = -rc1 NAME = Shuffling Zombie Juror # *DOCUMENTATION* @@ -372,6 +372,7 @@ GENKSYMS = scripts/genksyms/genksyms INSTALLKERNEL := installkernel DEPMOD = /sbin/depmod PERL = perl +PYTHON = python CHECK = sparse CHECKFLAGS := -D__linux__ -Dlinux -D__STDC__ -Dunix -D__unix__ \ @@ -422,7 +423,7 @@ KERNELVERSION = $(VERSION)$(if $(PATCHLEVEL),.$(PATCHLEVEL)$(if $(SUBLEVEL),.$(S export VERSION PATCHLEVEL SUBLEVEL KERNELRELEASE KERNELVERSION export ARCH SRCARCH CONFIG_SHELL HOSTCC HOSTCFLAGS CROSS_COMPILE AS LD CC export CPP AR NM STRIP OBJCOPY OBJDUMP -export MAKE AWK GENKSYMS INSTALLKERNEL PERL UTS_MACHINE +export MAKE AWK GENKSYMS INSTALLKERNEL PERL PYTHON UTS_MACHINE export HOSTCXX HOSTCXXFLAGS LDFLAGS_MODULE CHECK CHECKFLAGS export KBUILD_CPPFLAGS NOSTDINC_FLAGS LINUXINCLUDE OBJCOPYFLAGS LDFLAGS @@ -621,6 +622,9 @@ else KBUILD_CFLAGS += -O2 endif +# Tell gcc to never replace conditional load with a non-conditional one +KBUILD_CFLAGS += $(call cc-option,--param=allow-store-data-races=0) + ifdef CONFIG_READABLE_ASM # Disable optimizations that make assembler listings hard to read. # reorder blocks reorders the control in the function @@ -636,6 +640,22 @@ KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN}) endif # Handle stack protector mode. +# +# Since kbuild can potentially perform two passes (first with the old +# .config values and then with updated .config values), we cannot error out +# if a desired compiler option is unsupported. If we were to error, kbuild +# could never get to the second pass and actually notice that we changed +# the option to something that was supported. +# +# Additionally, we don't want to fallback and/or silently change which compiler +# flags will be used, since that leads to producing kernels with different +# security feature characteristics depending on the compiler used. ("But I +# selected CC_STACKPROTECTOR_STRONG! Why did it build with _REGULAR?!") +# +# The middle ground is to warn here so that the failed option is obvious, but +# to let the build fail with bad compiler flags so that we can't produce a +# kernel when there is a CONFIG and compiler mismatch. +# ifdef CONFIG_CC_STACKPROTECTOR_REGULAR stackp-flag := -fstack-protector ifeq ($(call cc-option, $(stackp-flag)),) @@ -668,6 +688,7 @@ KBUILD_CFLAGS += $(call cc-disable-warning, tautological-compare) # source of a reference will be _MergedGlobals and not on of the whitelisted names. # See modpost pattern 2 KBUILD_CFLAGS += $(call cc-option, -mno-global-merge,) +KBUILD_CFLAGS += $(call cc-option, -fcatch-undefined-behavior) else # This warning generated too much noise in a regular build. @@ -691,9 +712,16 @@ endif KBUILD_CFLAGS += $(call cc-option, -fno-var-tracking-assignments) ifdef CONFIG_DEBUG_INFO +ifdef CONFIG_DEBUG_INFO_SPLIT +KBUILD_CFLAGS += $(call cc-option, -gsplit-dwarf, -g) +else KBUILD_CFLAGS += -g +endif KBUILD_AFLAGS += -Wa,-gdwarf-2 endif +ifdef CONFIG_DEBUG_INFO_DWARF4 +KBUILD_CFLAGS += $(call cc-option, -gdwarf-4,) +endif ifdef CONFIG_DEBUG_INFO_REDUCED KBUILD_CFLAGS += $(call cc-option, -femit-struct-debug-baseonly) \ @@ -1035,6 +1063,13 @@ headers_check: headers_install $(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1 $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1 +# --------------------------------------------------------------------------- +# Kernel selftest + +PHONY += kselftest +kselftest: + $(Q)$(MAKE) -C tools/testing/selftests run_tests + # --------------------------------------------------------------------------- # Modules @@ -1222,9 +1257,9 @@ help: @echo ' tags/TAGS - Generate tags file for editors' @echo ' cscope - Generate cscope index' @echo ' gtags - Generate GNU GLOBAL index' - @echo ' kernelrelease - Output the release version string' - @echo ' kernelversion - Output the version stored in Makefile' - @echo ' image_name - Output the image name' + @echo ' kernelrelease - Output the release version string (use with make -s)' + @echo ' kernelversion - Output the version stored in Makefile (use with make -s)' + @echo ' image_name - Output the image name (use with make -s)' @echo ' headers_install - Install sanitised kernel headers to INSTALL_HDR_PATH'; \ echo ' (default: $(INSTALL_HDR_PATH))'; \ echo '' @@ -1238,6 +1273,11 @@ help: @echo ' headerdep - Detect inclusion cycles in headers' @$(MAKE) -f $(srctree)/scripts/Makefile.help checker-help @echo '' + @echo 'Kernel selftest' + @echo ' kselftest - Build and run kernel selftest (run as root)' + @echo ' Build, install, and boot kernel before' + @echo ' running kselftest on it' + @echo '' @echo 'Kernel packaging:' @$(MAKE) $(build)=$(package-dir) help @echo '' @@ -1379,6 +1419,7 @@ clean: $(clean-dirs) @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ -o -name '*.ko.*' \ + -o -name '*.dwo' \ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ -o -name '*.symtypes' -o -name 'modules.order' \ -o -name modules.builtin -o -name '.tmp_*.o.*' \ diff --git a/arch/Kconfig b/arch/Kconfig index 97ff872c7accf99b3779314718fe31fd60ee1d42..0eae9df35b884190f7f988702c64158b9a66cda0 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -321,6 +321,7 @@ config HAVE_ARCH_SECCOMP_FILTER - secure_computing is called from a ptrace_event()-safe context - secure_computing return value is checked and a return value of -1 results in the system call being skipped immediately. + - seccomp syscall wired up config SECCOMP_FILTER def_bool y diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild index 96e54bed50889e4fe62c71ac6125ac6fe0dad5f2..e858aa0ad8af3cc4008b464914c264acd39e3980 100644 --- a/arch/alpha/include/asm/Kbuild +++ b/arch/alpha/include/asm/Kbuild @@ -6,4 +6,5 @@ generic-y += exec.h generic-y += hash.h generic-y += mcs_spinlock.h generic-y += preempt.h +generic-y += scatterlist.h generic-y += trace_clock.h diff --git a/arch/alpha/include/asm/scatterlist.h b/arch/alpha/include/asm/scatterlist.h deleted file mode 100644 index 017d7471c3c45e2af3a53bb8ed2ddd0a466634e3..0000000000000000000000000000000000000000 --- a/arch/alpha/include/asm/scatterlist.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ALPHA_SCATTERLIST_H -#define _ALPHA_SCATTERLIST_H - -#include - -#endif /* !(_ALPHA_SCATTERLIST_H) */ diff --git a/arch/arc/boot/dts/angel4.dts b/arch/arc/boot/dts/angel4.dts index 5bb2fdaca02f9ace5f92a3934d0be7cb79d4c697..6b57475967a6f7abef31275a9e63f090468399bb 100644 --- a/arch/arc/boot/dts/angel4.dts +++ b/arch/arc/boot/dts/angel4.dts @@ -17,7 +17,7 @@ / { interrupt-parent = <&intc>; chosen { - bootargs = "console=ttyARC0,115200n8 earlyprintk=ttyARC0"; + bootargs = "earlycon=arc_uart,mmio32,0xc0fc1000,115200n8 console=ttyARC0,115200n8"; }; aliases { diff --git a/arch/arc/include/asm/arcregs.h b/arch/arc/include/asm/arcregs.h index 355cb470c2a4770f7ba9d06a93dd8aa162789680..372466b371bf8c855944b2007efaa0ec7ba69fcf 100644 --- a/arch/arc/include/asm/arcregs.h +++ b/arch/arc/include/asm/arcregs.h @@ -296,7 +296,7 @@ struct cpuinfo_arc_mmu { }; struct cpuinfo_arc_cache { - unsigned int sz, line_len, assoc, ver; + unsigned int sz_k:8, line_len:8, assoc:4, ver:4, alias:1, vipt:1, pad:6; }; struct cpuinfo_arc_ccm { diff --git a/arch/arc/include/asm/irq.h b/arch/arc/include/asm/irq.h index fb4efb64897145e946c0ce2c146019c35f08edff..f38652fb2ed772566b0a47cf51a01183a329004c 100644 --- a/arch/arc/include/asm/irq.h +++ b/arch/arc/include/asm/irq.h @@ -16,9 +16,13 @@ #define TIMER0_IRQ 3 #define TIMER1_IRQ 4 +#include #include extern void arc_init_IRQ(void); void arc_local_timer_setup(void); +void arc_request_percpu_irq(int irq, int cpu, + irqreturn_t (*isr)(int irq, void *dev), + const char *irq_nm, void *percpu_dev); #endif diff --git a/arch/arc/include/asm/irqflags.h b/arch/arc/include/asm/irqflags.h index cb7efc29f16ff076778c254f97d17212c0631e89..587df8236e8b4c91e896893522f7b060c3cc6d0d 100644 --- a/arch/arc/include/asm/irqflags.h +++ b/arch/arc/include/asm/irqflags.h @@ -131,24 +131,6 @@ static inline int arch_irqs_disabled(void) return arch_irqs_disabled_flags(arch_local_save_flags()); } -static inline void arch_mask_irq(unsigned int irq) -{ - unsigned int ienb; - - ienb = read_aux_reg(AUX_IENABLE); - ienb &= ~(1 << irq); - write_aux_reg(AUX_IENABLE, ienb); -} - -static inline void arch_unmask_irq(unsigned int irq) -{ - unsigned int ienb; - - ienb = read_aux_reg(AUX_IENABLE); - ienb |= (1 << irq); - write_aux_reg(AUX_IENABLE, ienb); -} - #else #ifdef CONFIG_TRACE_IRQFLAGS diff --git a/arch/arc/kernel/irq.c b/arch/arc/kernel/irq.c index 7d653c0d077390fa31bc70a6e6e67cbf78ad33a8..620ec2fe32a94f855c6e3db0a04fa25c41d5d1c2 100644 --- a/arch/arc/kernel/irq.c +++ b/arch/arc/kernel/irq.c @@ -19,21 +19,16 @@ /* * Early Hardware specific Interrupt setup + * -Platform independent, needed for each CPU (not foldable into init_IRQ) * -Called very early (start_kernel -> setup_arch -> setup_processor) - * -Platform Independent (must for any ARC700) - * -Needed for each CPU (hence not foldable into init_IRQ) * * what it does ? - * -Disable all IRQs (on CPU side) * -Optionally, setup the High priority Interrupts as Level 2 IRQs */ void arc_init_IRQ(void) { int level_mask = 0; - /* Disable all IRQs: enable them as devices request */ - write_aux_reg(AUX_IENABLE, 0); - /* setup any high priority Interrupts (Level2 in ARCompact jargon) */ level_mask |= IS_ENABLED(CONFIG_ARC_IRQ3_LV2) << 3; level_mask |= IS_ENABLED(CONFIG_ARC_IRQ5_LV2) << 5; @@ -60,20 +55,28 @@ void arc_init_IRQ(void) * below, per IRQ. */ -static void arc_mask_irq(struct irq_data *data) +static void arc_irq_mask(struct irq_data *data) { - arch_mask_irq(data->irq); + unsigned int ienb; + + ienb = read_aux_reg(AUX_IENABLE); + ienb &= ~(1 << data->irq); + write_aux_reg(AUX_IENABLE, ienb); } -static void arc_unmask_irq(struct irq_data *data) +static void arc_irq_unmask(struct irq_data *data) { - arch_unmask_irq(data->irq); + unsigned int ienb; + + ienb = read_aux_reg(AUX_IENABLE); + ienb |= (1 << data->irq); + write_aux_reg(AUX_IENABLE, ienb); } static struct irq_chip onchip_intc = { .name = "ARC In-core Intc", - .irq_mask = arc_mask_irq, - .irq_unmask = arc_unmask_irq, + .irq_mask = arc_irq_mask, + .irq_unmask = arc_irq_unmask, }; static int arc_intc_domain_map(struct irq_domain *d, unsigned int irq, @@ -150,6 +153,32 @@ void arch_do_IRQ(unsigned int irq, struct pt_regs *regs) set_irq_regs(old_regs); } +void arc_request_percpu_irq(int irq, int cpu, + irqreturn_t (*isr)(int irq, void *dev), + const char *irq_nm, + void *percpu_dev) +{ + /* Boot cpu calls request, all call enable */ + if (!cpu) { + int rc; + + /* + * These 2 calls are essential to making percpu IRQ APIs work + * Ideally these details could be hidden in irq chip map function + * but the issue is IPIs IRQs being static (non-DT) and platform + * specific, so we can't identify them there. + */ + irq_set_percpu_devid(irq); + irq_modify_status(irq, IRQ_NOAUTOEN, 0); /* @irq, @clr, @set */ + + rc = request_percpu_irq(irq, isr, irq_nm, percpu_dev); + if (rc) + panic("Percpu IRQ request failed for %d\n", irq); + } + + enable_percpu_irq(irq, 0); +} + /* * arch_local_irq_enable - Enable interrupts. * diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c index 7e95e1a86510fee2f2e1511f8bc7b63f8fb48122..cb3142a2d40b2bd3c85a6c86741debab6a1cf334 100644 --- a/arch/arc/kernel/signal.c +++ b/arch/arc/kernel/signal.c @@ -141,17 +141,13 @@ SYSCALL_DEFINE0(rt_sigreturn) /* * Determine which stack to use.. */ -static inline void __user *get_sigframe(struct k_sigaction *ka, +static inline void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs, unsigned long framesize) { - unsigned long sp = regs->sp; + unsigned long sp = sigsp(regs->sp, ksig); void __user *frame; - /* This is the X/Open sanctioned signal stack switching */ - if ((ka->sa.sa_flags & SA_ONSTACK) && !sas_ss_flags(sp)) - sp = current->sas_ss_sp + current->sas_ss_size; - /* No matter what happens, 'sp' must be word * aligned otherwise nasty things could happen */ @@ -179,14 +175,13 @@ static inline int map_sig(int sig) } static int -setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs *regs) +setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs) { struct rt_sigframe __user *sf; unsigned int magic = 0; int err = 0; - sf = get_sigframe(ka, regs, sizeof(struct rt_sigframe)); + sf = get_sigframe(ksig, regs, sizeof(struct rt_sigframe)); if (!sf) return 1; @@ -205,8 +200,8 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info, * #2: struct siginfo * #3: struct ucontext (completely populated) */ - if (unlikely(ka->sa.sa_flags & SA_SIGINFO)) { - err |= copy_siginfo_to_user(&sf->info, info); + if (unlikely(ksig->ka.sa.sa_flags & SA_SIGINFO)) { + err |= copy_siginfo_to_user(&sf->info, &ksig->info); err |= __put_user(0, &sf->uc.uc_flags); err |= __put_user(NULL, &sf->uc.uc_link); err |= __save_altstack(&sf->uc.uc_stack, regs->sp); @@ -227,16 +222,16 @@ setup_rt_frame(int signo, struct k_sigaction *ka, siginfo_t *info, return err; /* #1 arg to the user Signal handler */ - regs->r0 = map_sig(signo); + regs->r0 = map_sig(ksig->sig); /* setup PC of user space signal handler */ - regs->ret = (unsigned long)ka->sa.sa_handler; + regs->ret = (unsigned long)ksig->ka.sa.sa_handler; /* * handler returns using sigreturn stub provided already by userpsace */ - BUG_ON(!(ka->sa.sa_flags & SA_RESTORER)); - regs->blink = (unsigned long)ka->sa.sa_restorer; + BUG_ON(!(ksig->ka.sa.sa_flags & SA_RESTORER)); + regs->blink = (unsigned long)ksig->ka.sa.sa_restorer; /* User Stack for signal handler will be above the frame just carved */ regs->sp = (unsigned long)sf; @@ -298,38 +293,30 @@ static void arc_restart_syscall(struct k_sigaction *ka, struct pt_regs *regs) * OK, we're invoking a handler */ static void -handle_signal(unsigned long sig, struct k_sigaction *ka, siginfo_t *info, - struct pt_regs *regs) +handle_signal(struct ksignal *ksig, struct pt_regs *regs) { sigset_t *oldset = sigmask_to_save(); int ret; /* Set up the stack frame */ - ret = setup_rt_frame(sig, ka, info, oldset, regs); + ret = setup_rt_frame(ksig, oldset, regs); - if (ret) - force_sigsegv(sig, current); - else - signal_delivered(sig, info, ka, regs, 0); + signal_setup_done(ret, ksig, 0); } void do_signal(struct pt_regs *regs) { - struct k_sigaction ka; - siginfo_t info; - int signr; + struct ksignal ksig; int restart_scall; - signr = get_signal_to_deliver(&info, &ka, regs, NULL); - restart_scall = in_syscall(regs) && syscall_restartable(regs); - if (signr > 0) { + if (get_signal(&ksig)) { if (restart_scall) { - arc_restart_syscall(&ka, regs); + arc_restart_syscall(&ksig.ka, regs); syscall_wont_restart(regs); /* No more restarts */ } - handle_signal(signr, &ka, &info, regs); + handle_signal(&ksig, regs); return; } diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c index c802bb5006028e15c1ed1cdc4da5423c09f81236..dcd317c47d098f0fef9391d8173cff82a1b96ba7 100644 --- a/arch/arc/kernel/smp.c +++ b/arch/arc/kernel/smp.c @@ -12,23 +12,15 @@ * -- Initial Write (Borrowed heavily from ARM) */ -#include -#include #include #include #include #include -#include -#include #include #include -#include #include -#include #include -#include #include -#include #include #include #include @@ -136,7 +128,7 @@ void start_kernel_secondary(void) pr_info("## CPU%u LIVE ##: Executing Code...\n", cpu); if (machine_desc->init_smp) - machine_desc->init_smp(smp_processor_id()); + machine_desc->init_smp(cpu); arc_local_timer_setup(); @@ -338,18 +330,11 @@ irqreturn_t do_IPI(int irq, void *dev_id) */ static DEFINE_PER_CPU(int, ipi_dev); -static struct irqaction arc_ipi_irq = { - .name = "IPI Interrupt", - .flags = IRQF_PERCPU, - .handler = do_IPI, -}; - int smp_ipi_irq_setup(int cpu, int irq) { - if (!cpu) - return setup_irq(irq, &arc_ipi_irq); - else - arch_unmask_irq(irq); + int *dev = per_cpu_ptr(&ipi_dev, cpu); + + arc_request_percpu_irq(irq, cpu, do_IPI, "IPI Interrupt", dev); return 0; } diff --git a/arch/arc/kernel/time.c b/arch/arc/kernel/time.c index 36c2aa99436f54825e03655e370a388e6d7b6055..dbe74f418019bf7e498ed95bcdc08149a752ff51 100644 --- a/arch/arc/kernel/time.c +++ b/arch/arc/kernel/time.c @@ -144,12 +144,12 @@ static struct clocksource arc_counter = { /********** Clock Event Device *********/ /* - * Arm the timer to interrupt after @limit cycles + * Arm the timer to interrupt after @cycles * The distinction for oneshot/periodic is done in arc_event_timer_ack() below */ -static void arc_timer_event_setup(unsigned int limit) +static void arc_timer_event_setup(unsigned int cycles) { - write_aux_reg(ARC_REG_TIMER0_LIMIT, limit); + write_aux_reg(ARC_REG_TIMER0_LIMIT, cycles); write_aux_reg(ARC_REG_TIMER0_CNT, 0); /* start from 0 */ write_aux_reg(ARC_REG_TIMER0_CTRL, TIMER_CTRL_IE | TIMER_CTRL_NH); @@ -168,6 +168,10 @@ static void arc_clkevent_set_mode(enum clock_event_mode mode, { switch (mode) { case CLOCK_EVT_MODE_PERIODIC: + /* + * At X Hz, 1 sec = 1000ms -> X cycles; + * 10ms -> X / 100 cycles + */ arc_timer_event_setup(arc_get_core_freq() / HZ); break; case CLOCK_EVT_MODE_ONESHOT: @@ -210,12 +214,6 @@ static irqreturn_t timer_irq_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static struct irqaction arc_timer_irq = { - .name = "Timer0 (clock-evt-dev)", - .flags = IRQF_TIMER | IRQF_PERCPU, - .handler = timer_irq_handler, -}; - /* * Setup the local event timer for @cpu */ @@ -228,15 +226,9 @@ void arc_local_timer_setup() clockevents_config_and_register(evt, arc_get_core_freq(), 0, ARC_TIMER_MAX); - /* - * setup the per-cpu timer IRQ handler - for all cpus - * For non boot CPU explicitly unmask at intc - * setup_irq() -> .. -> irq_startup() already does this on boot-cpu - */ - if (!cpu) - setup_irq(TIMER0_IRQ, &arc_timer_irq); - else - arch_unmask_irq(TIMER0_IRQ); + /* setup the per-cpu timer IRQ handler - for all cpus */ + arc_request_percpu_irq(TIMER0_IRQ, cpu, timer_irq_handler, + "Timer0 (per-cpu-tick)", evt); } /* diff --git a/arch/arc/mm/cache_arc700.c b/arch/arc/mm/cache_arc700.c index 353b202c37c91e452fb365caacde84efbe27181e..4670afc3b971374886c923efc762ed2684b9aa49 100644 --- a/arch/arc/mm/cache_arc700.c +++ b/arch/arc/mm/cache_arc700.c @@ -77,21 +77,19 @@ char *arc_cache_mumbojumbo(int c, char *buf, int len) { int n = 0; -#define PR_CACHE(p, enb, str) \ -{ \ +#define PR_CACHE(p, cfg, str) \ if (!(p)->ver) \ n += scnprintf(buf + n, len - n, str"\t\t: N/A\n"); \ else \ n += scnprintf(buf + n, len - n, \ - str"\t\t: (%uK) VIPT, %dway set-asc, %ub Line %s\n", \ - TO_KB((p)->sz), (p)->assoc, (p)->line_len, \ - enb ? "" : "DISABLED (kernel-build)"); \ -} + str"\t\t: %uK, %dway/set, %uB Line, %s%s%s\n", \ + (p)->sz_k, (p)->assoc, (p)->line_len, \ + (p)->vipt ? "VIPT" : "PIPT", \ + (p)->alias ? " aliasing" : "", \ + IS_ENABLED(cfg) ? "" : " (not used)"); - PR_CACHE(&cpuinfo_arc700[c].icache, IS_ENABLED(CONFIG_ARC_HAS_ICACHE), - "I-Cache"); - PR_CACHE(&cpuinfo_arc700[c].dcache, IS_ENABLED(CONFIG_ARC_HAS_DCACHE), - "D-Cache"); + PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache"); + PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache"); return buf; } @@ -116,20 +114,31 @@ void read_decode_cache_bcr(void) p_ic = &cpuinfo_arc700[cpu].icache; READ_BCR(ARC_REG_IC_BCR, ibcr); + if (!ibcr.ver) + goto dc_chk; + BUG_ON(ibcr.config != 3); p_ic->assoc = 2; /* Fixed to 2w set assoc */ p_ic->line_len = 8 << ibcr.line_len; - p_ic->sz = 0x200 << ibcr.sz; + p_ic->sz_k = 1 << (ibcr.sz - 1); p_ic->ver = ibcr.ver; + p_ic->vipt = 1; + p_ic->alias = p_ic->sz_k/p_ic->assoc/TO_KB(PAGE_SIZE) > 1; +dc_chk: p_dc = &cpuinfo_arc700[cpu].dcache; READ_BCR(ARC_REG_DC_BCR, dbcr); + if (!dbcr.ver) + return; + BUG_ON(dbcr.config != 2); p_dc->assoc = 4; /* Fixed to 4w set assoc */ p_dc->line_len = 16 << dbcr.line_len; - p_dc->sz = 0x200 << dbcr.sz; + p_dc->sz_k = 1 << (dbcr.sz - 1); p_dc->ver = dbcr.ver; + p_dc->vipt = 1; + p_dc->alias = p_dc->sz_k/p_dc->assoc/TO_KB(PAGE_SIZE) > 1; } /* @@ -142,14 +151,16 @@ void read_decode_cache_bcr(void) void arc_cache_init(void) { unsigned int __maybe_unused cpu = smp_processor_id(); - struct cpuinfo_arc_cache __maybe_unused *ic, __maybe_unused *dc; char str[256]; printk(arc_cache_mumbojumbo(0, str, sizeof(str))); -#ifdef CONFIG_ARC_HAS_ICACHE - ic = &cpuinfo_arc700[cpu].icache; - if (ic->ver) { + if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) { + struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache; + + if (!ic->ver) + panic("cache support enabled but non-existent cache\n"); + if (ic->line_len != L1_CACHE_BYTES) panic("ICache line [%d] != kernel Config [%d]", ic->line_len, L1_CACHE_BYTES); @@ -158,26 +169,26 @@ void arc_cache_init(void) panic("Cache ver [%d] doesn't match MMU ver [%d]\n", ic->ver, CONFIG_ARC_MMU_VER); } -#endif -#ifdef CONFIG_ARC_HAS_DCACHE - dc = &cpuinfo_arc700[cpu].dcache; - if (dc->ver) { - unsigned int dcache_does_alias; + if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) { + struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache; + int handled; + + if (!dc->ver) + panic("cache support enabled but non-existent cache\n"); if (dc->line_len != L1_CACHE_BYTES) panic("DCache line [%d] != kernel Config [%d]", dc->line_len, L1_CACHE_BYTES); /* check for D-Cache aliasing */ - dcache_does_alias = (dc->sz / dc->assoc) > PAGE_SIZE; + handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING); - if (dcache_does_alias && !cache_is_vipt_aliasing()) + if (dc->alias && !handled) panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n"); - else if (!dcache_does_alias && cache_is_vipt_aliasing()) + else if (!dc->alias && handled) panic("Don't need CONFIG_ARC_CACHE_VIPT_ALIASING\n"); } -#endif } #define OP_INV 0x1 @@ -255,10 +266,32 @@ static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr, * Machine specific helpers for Entire D-Cache or Per Line ops */ -static inline void wait_for_flush(void) +static unsigned int __before_dc_op(const int op) +{ + unsigned int reg = reg; + + if (op == OP_FLUSH_N_INV) { + /* Dcache provides 2 cmd: FLUSH or INV + * INV inturn has sub-modes: DISCARD or FLUSH-BEFORE + * flush-n-inv is achieved by INV cmd but with IM=1 + * So toggle INV sub-mode depending on op request and default + */ + reg = read_aux_reg(ARC_REG_DC_CTRL); + write_aux_reg(ARC_REG_DC_CTRL, reg | DC_CTRL_INV_MODE_FLUSH) + ; + } + + return reg; +} + +static void __after_dc_op(const int op, unsigned int reg) { - while (read_aux_reg(ARC_REG_DC_CTRL) & DC_CTRL_FLUSH_STATUS) - ; + if (op & OP_FLUSH) /* flush / flush-n-inv both wait */ + while (read_aux_reg(ARC_REG_DC_CTRL) & DC_CTRL_FLUSH_STATUS); + + /* Switch back to default Invalidate mode */ + if (op == OP_FLUSH_N_INV) + write_aux_reg(ARC_REG_DC_CTRL, reg & ~DC_CTRL_INV_MODE_FLUSH); } /* @@ -269,18 +302,10 @@ static inline void wait_for_flush(void) */ static inline void __dc_entire_op(const int cacheop) { - unsigned int tmp = tmp; + unsigned int ctrl_reg; int aux; - if (cacheop == OP_FLUSH_N_INV) { - /* Dcache provides 2 cmd: FLUSH or INV - * INV inturn has sub-modes: DISCARD or FLUSH-BEFORE - * flush-n-inv is achieved by INV cmd but with IM=1 - * Default INV sub-mode is DISCARD, which needs to be toggled - */ - tmp = read_aux_reg(ARC_REG_DC_CTRL); - write_aux_reg(ARC_REG_DC_CTRL, tmp | DC_CTRL_INV_MODE_FLUSH); - } + ctrl_reg = __before_dc_op(cacheop); if (cacheop & OP_INV) /* Inv or flush-n-inv use same cmd reg */ aux = ARC_REG_DC_IVDC; @@ -289,12 +314,7 @@ static inline void __dc_entire_op(const int cacheop) write_aux_reg(aux, 0x1); - if (cacheop & OP_FLUSH) /* flush / flush-n-inv both wait */ - wait_for_flush(); - - /* Switch back the DISCARD ONLY Invalidate mode */ - if (cacheop == OP_FLUSH_N_INV) - write_aux_reg(ARC_REG_DC_CTRL, tmp & ~DC_CTRL_INV_MODE_FLUSH); + __after_dc_op(cacheop, ctrl_reg); } /* For kernel mappings cache operation: index is same as paddr */ @@ -306,29 +326,16 @@ static inline void __dc_entire_op(const int cacheop) static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr, unsigned long sz, const int cacheop) { - unsigned long flags, tmp = tmp; + unsigned long flags; + unsigned int ctrl_reg; local_irq_save(flags); - if (cacheop == OP_FLUSH_N_INV) { - /* - * Dcache provides 2 cmd: FLUSH or INV - * INV inturn has sub-modes: DISCARD or FLUSH-BEFORE - * flush-n-inv is achieved by INV cmd but with IM=1 - * Default INV sub-mode is DISCARD, which needs to be toggled - */ - tmp = read_aux_reg(ARC_REG_DC_CTRL); - write_aux_reg(ARC_REG_DC_CTRL, tmp | DC_CTRL_INV_MODE_FLUSH); - } + ctrl_reg = __before_dc_op(cacheop); __cache_line_loop(paddr, vaddr, sz, cacheop); - if (cacheop & OP_FLUSH) /* flush / flush-n-inv both wait */ - wait_for_flush(); - - /* Switch back the DISCARD ONLY Invalidate mode */ - if (cacheop == OP_FLUSH_N_INV) - write_aux_reg(ARC_REG_DC_CTRL, tmp & ~DC_CTRL_INV_MODE_FLUSH); + __after_dc_op(cacheop, ctrl_reg); local_irq_restore(flags); } @@ -389,8 +396,16 @@ static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr, /*********************************************************** * Machine specific helper for per line I-Cache invalidate. */ -static void __ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr, - unsigned long sz) + +static inline void __ic_entire_inv(void) +{ + write_aux_reg(ARC_REG_IC_IVIC, 1); + read_aux_reg(ARC_REG_IC_CTRL); /* blocks */ +} + +static inline void +__ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr, + unsigned long sz) { unsigned long flags; @@ -399,30 +414,39 @@ static void __ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr, local_irq_restore(flags); } -static inline void __ic_entire_inv(void) -{ - write_aux_reg(ARC_REG_IC_IVIC, 1); - read_aux_reg(ARC_REG_IC_CTRL); /* blocks */ -} +#ifndef CONFIG_SMP + +#define __ic_line_inv_vaddr(p, v, s) __ic_line_inv_vaddr_local(p, v, s) -struct ic_line_inv_vaddr_ipi { +#else + +struct ic_inv_args { unsigned long paddr, vaddr; int sz; }; static void __ic_line_inv_vaddr_helper(void *info) { - struct ic_line_inv_vaddr_ipi *ic_inv = (struct ic_line_inv_vaddr_ipi*) info; + struct ic_inv *ic_inv_args = (struct ic_inv_args *) info; + __ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz); } static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr, unsigned long sz) { - struct ic_line_inv_vaddr_ipi ic_inv = { paddr, vaddr , sz}; + struct ic_inv_args ic_inv = { + .paddr = paddr, + .vaddr = vaddr, + .sz = sz + }; + on_each_cpu(__ic_line_inv_vaddr_helper, &ic_inv, 1); } -#else + +#endif /* CONFIG_SMP */ + +#else /* !CONFIG_ARC_HAS_ICACHE */ #define __ic_entire_inv() #define __ic_line_inv_vaddr(pstart, vstart, sz) diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c index 9c69552350c49754ee056ab854a5971b460fe5f8..6f7e3a68803a097461d27ace9fa940ba3211ab6b 100644 --- a/arch/arc/mm/fault.c +++ b/arch/arc/mm/fault.c @@ -159,7 +159,6 @@ void do_page_fault(unsigned long address, struct pt_regs *regs) return; } - /* TBD: switch to pagefault_out_of_memory() */ if (fault & VM_FAULT_OOM) goto out_of_memory; else if (fault & VM_FAULT_SIGBUS) diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S index 79bfc81358c9a3199cf6d1354376a05926a97839..d572f1c2c72470e4b8f321787a8499e02da518e0 100644 --- a/arch/arc/mm/tlbex.S +++ b/arch/arc/mm/tlbex.S @@ -220,9 +220,9 @@ ex_saved_reg1: .macro CONV_PTE_TO_TLB and r3, r0, PTE_BITS_RWX ; r w x - lsl r2, r3, 3 ; r w x 0 0 0 + lsl r2, r3, 3 ; r w x 0 0 0 (GLOBAL, kernel only) and.f 0, r0, _PAGE_GLOBAL - or.z r2, r2, r3 ; r w x r w x + or.z r2, r2, r3 ; r w x r w x (!GLOBAL, user page) and r3, r0, PTE_BITS_NON_RWX_IN_PD1 ; Extract PFN+cache bits from PTE or r3, r3, r2 diff --git a/arch/arc/plat-arcfpga/Kconfig b/arch/arc/plat-arcfpga/Kconfig index e27bb5cc3c1e1f8d405679ad1d038e8cfc9d61a6..b9f34cf55acf47c653d6d6b7e5c09adde2d9d324 100644 --- a/arch/arc/plat-arcfpga/Kconfig +++ b/arch/arc/plat-arcfpga/Kconfig @@ -41,11 +41,4 @@ config ISS_SMP_EXTN -XTL (To enable CPU start/stop/set-PC for another CPU) It doesn't provide coherent Caches and/or Atomic Ops (LLOCK/SCOND) -config ARC_SERIAL_BAUD - int "UART Baud rate" - default "115200" - depends on SERIAL_ARC || SERIAL_ARC_CONSOLE - help - Baud rate for the ARC UART - endif diff --git a/arch/arc/plat-arcfpga/Makefile b/arch/arc/plat-arcfpga/Makefile index 4d1bddc34b5b531076ef05ea89206a6b75c4ef86..66fd0ecd68b302b676565a6aed84ed55f0b0f654 100644 --- a/arch/arc/plat-arcfpga/Makefile +++ b/arch/arc/plat-arcfpga/Makefile @@ -8,5 +8,5 @@ KBUILD_CFLAGS += -Iarch/arc/plat-arcfpga/include -obj-y := platform.o irq.o +obj-y := platform.o obj-$(CONFIG_ISS_SMP_EXTN) += smp.o diff --git a/arch/arc/plat-arcfpga/include/plat/irq.h b/arch/arc/plat-arcfpga/include/plat/irq.h index 6adbc53c3a5b21e658cc5f03c06604d7c0b4412d..2c9dea690ac47f295a41b34f44ba9434ea72386a 100644 --- a/arch/arc/plat-arcfpga/include/plat/irq.h +++ b/arch/arc/plat-arcfpga/include/plat/irq.h @@ -24,6 +24,4 @@ #define IDU_INTERRUPT_0 16 #endif -extern void __init plat_fpga_init_IRQ(void); - #endif diff --git a/arch/arc/plat-arcfpga/irq.c b/arch/arc/plat-arcfpga/irq.c deleted file mode 100644 index d2215fd889c23ccd1ad72ad0d5de5357f2736c8f..0000000000000000000000000000000000000000 --- a/arch/arc/plat-arcfpga/irq.c +++ /dev/null @@ -1,25 +0,0 @@ -/* - * ARC FPGA Platform IRQ hookups - * - * Copyright (C) 2012 Synopsys, Inc. (www.synopsys.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - -void __init plat_fpga_init_IRQ(void) -{ - /* - * SMP Hack because UART IRQ hardwired to cpu0 (boot-cpu) but if the - * request_irq() comes from any other CPU, the low level IRQ unamsking - * essential for getting Interrupts won't be enabled on cpu0, locking - * up the UART state machine. - */ -#ifdef CONFIG_SMP - arch_unmask_irq(UART0_IRQ); -#endif -} diff --git a/arch/arc/plat-arcfpga/platform.c b/arch/arc/plat-arcfpga/platform.c index 61c7e5997387bc1292cf05b1de81297856aa5865..1038949a99a177a0c5e4429be113332268f20f29 100644 --- a/arch/arc/plat-arcfpga/platform.c +++ b/arch/arc/plat-arcfpga/platform.c @@ -22,115 +22,22 @@ #include #include -/*----------------------- Platform Devices -----------------------------*/ - -#if IS_ENABLED(CONFIG_SERIAL_ARC) -static unsigned long arc_uart_info[] = { - 0, /* uart->is_emulated (runtime @running_on_hw) */ - 0, /* uart->port.uartclk */ - 0, /* uart->baud */ - 0 -}; - -#if defined(CONFIG_SERIAL_ARC_CONSOLE) -/* - * static platform data - but only for early serial - * TBD: derive this from a special DT node - */ -static struct resource arc_uart0_res[] = { - { - .start = UART0_BASE, - .end = UART0_BASE + 0xFF, - .flags = IORESOURCE_MEM, - }, - { - .start = UART0_IRQ, - .end = UART0_IRQ, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device arc_uart0_dev = { - .name = "arc-uart", - .id = 0, - .num_resources = ARRAY_SIZE(arc_uart0_res), - .resource = arc_uart0_res, - .dev = { - .platform_data = &arc_uart_info, - }, -}; - -static struct platform_device *fpga_early_devs[] __initdata = { - &arc_uart0_dev, -}; -#endif /* CONFIG_SERIAL_ARC_CONSOLE */ - -static void arc_fpga_serial_init(void) -{ - /* To let driver workaround ISS bug: baudh Reg can't be set to 0 */ - arc_uart_info[0] = !running_on_hw; - - arc_uart_info[1] = arc_get_core_freq(); - - arc_uart_info[2] = CONFIG_ARC_SERIAL_BAUD; - -#if defined(CONFIG_SERIAL_ARC_CONSOLE) - early_platform_add_devices(fpga_early_devs, - ARRAY_SIZE(fpga_early_devs)); - - /* - * ARC console driver registers (build time) as an early platform driver - * of class "earlyprintk". However it needs explicit cmdline toggle - * "earlyprintk=ttyARC0" to be successfuly runtime registered. - * Otherwise the early probe below fails to find the driver - */ - early_platform_driver_probe("earlyprintk", 1, 0); - - /* - * This is to make sure that arc uart would be preferred console - * despite one/more of following: - * -command line lacked "console=ttyARC0" or - * -CONFIG_VT_CONSOLE was enabled (for no reason whatsoever) - * Note that this needs to be done after above early console is reg, - * otherwise the early console never gets a chance to run. - */ - add_preferred_console("ttyARC", 0, "115200"); -#endif /* CONFIG_SERIAL_ARC_CONSOLE */ -} -#else /* !IS_ENABLED(CONFIG_SERIAL_ARC) */ -static void arc_fpga_serial_init(void) -{ -} -#endif - static void __init plat_fpga_early_init(void) { pr_info("[plat-arcfpga]: registering early dev resources\n"); - arc_fpga_serial_init(); - #ifdef CONFIG_ISS_SMP_EXTN iss_model_init_early_smp(); #endif } -static struct of_dev_auxdata plat_auxdata_lookup[] __initdata = { -#if IS_ENABLED(CONFIG_SERIAL_ARC) - OF_DEV_AUXDATA("snps,arc-uart", UART0_BASE, "arc-uart", arc_uart_info), -#endif - {} -}; - static void __init plat_fpga_populate_dev(void) { - pr_info("[plat-arcfpga]: registering device resources\n"); - /* * Traverses flattened DeviceTree - registering platform devices - * complete with their resources + * (if any) complete with their resources */ - of_platform_populate(NULL, of_default_bus_match_table, - plat_auxdata_lookup, NULL); + of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL); } /*----------------------- Machine Descriptions ------------------------------ @@ -150,7 +57,6 @@ MACHINE_START(ANGEL4, "angel4") .dt_compat = aa4_compat, .init_early = plat_fpga_early_init, .init_machine = plat_fpga_populate_dev, - .init_irq = plat_fpga_init_IRQ, #ifdef CONFIG_ISS_SMP_EXTN .init_smp = iss_model_init_smp, #endif @@ -165,7 +71,6 @@ MACHINE_START(ML509, "ml509") .dt_compat = ml509_compat, .init_early = plat_fpga_early_init, .init_machine = plat_fpga_populate_dev, - .init_irq = plat_fpga_init_IRQ, #ifdef CONFIG_SMP .init_smp = iss_model_init_smp, #endif @@ -180,5 +85,4 @@ MACHINE_START(NSIMOSCI, "nsimosci") .dt_compat = nsimosci_compat, .init_early = NULL, .init_machine = plat_fpga_populate_dev, - .init_irq = NULL, MACHINE_END diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 290f02ee0157492ec037494c8db8bd5d036360dd..c49a775937db39912411a33be3d63a5d31eacfba 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -65,7 +65,6 @@ config ARM select HAVE_UID16 select HAVE_VIRT_CPU_ACCOUNTING_GEN select IRQ_FORCED_THREADING - select KTIME_SCALAR select MODULES_USE_ELF_REL select NO_BOOTMEM select OLD_SIGACTION @@ -84,6 +83,7 @@ config ARM . config ARM_HAS_SG_CHAIN + select ARCH_HAS_SG_CHAIN bool config NEED_SG_DMA_LENGTH @@ -240,13 +240,6 @@ config ARM_PATCH_PHYS_VIRT this feature (eg, building a kernel for a single machine) and you need to shrink the kernel to the minimal size. -config NEED_MACH_GPIO_H - bool - help - Select this when mach/gpio.h is required to provide special - definitions for this platform. The need for mach/gpio.h should - be avoided when possible. - config NEED_MACH_IO_H bool help @@ -263,8 +256,22 @@ config NEED_MACH_MEMORY_H config PHYS_OFFSET hex "Physical address of main memory" if MMU - depends on !ARM_PATCH_PHYS_VIRT && !NEED_MACH_MEMORY_H + depends on !ARM_PATCH_PHYS_VIRT default DRAM_BASE if !MMU + default 0x00000000 if ARCH_EBSA110 || \ + EP93XX_SDCE3_SYNC_PHYS_OFFSET || \ + ARCH_FOOTBRIDGE || \ + ARCH_INTEGRATOR || \ + ARCH_IOP13XX || \ + ARCH_KS8695 || \ + (ARCH_REALVIEW && !REALVIEW_HIGH_PHYS_OFFSET) + default 0x10000000 if ARCH_OMAP1 || ARCH_RPC + default 0x20000000 if ARCH_S5PV210 + default 0x70000000 if REALVIEW_HIGH_PHYS_OFFSET + default 0xc0000000 if EP93XX_SDCE0_PHYS_OFFSET || ARCH_SA1100 + default 0xd0000000 if EP93XX_SDCE1_PHYS_OFFSET + default 0xe0000000 if EP93XX_SDCE2_PHYS_OFFSET + default 0xf0000000 if EP93XX_SDCE3_ASYNC_PHYS_OFFSET help Please provide the physical address corresponding to the location of main memory in your system. @@ -321,7 +328,6 @@ config ARCH_INTEGRATOR select HAVE_TCM select ICST select MULTI_IRQ_HANDLER - select NEED_MACH_MEMORY_H select PLAT_VERSATILE select SPARSE_IRQ select USE_OF @@ -341,7 +347,6 @@ config ARCH_REALVIEW select ICST select NEED_MACH_MEMORY_H select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD help This enables support for ARM Ltd RealView boards. @@ -356,7 +361,6 @@ config ARCH_VERSATILE select HAVE_MACH_CLKDEV select ICST select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD select PLAT_VERSATILE_CLOCK select VERSATILE_FPGA_IRQ help @@ -436,7 +440,6 @@ config ARCH_EP93XX select ARM_VIC select CLKDEV_LOOKUP select CPU_ARM920T - select NEED_MACH_MEMORY_H help This enables support for the Cirrus EP93xx series of CPUs. @@ -529,21 +532,6 @@ config ARCH_DOVE help Support for the Marvell Dove SoC 88AP510 -config ARCH_KIRKWOOD - bool "Marvell Kirkwood" - select ARCH_REQUIRE_GPIOLIB - select CPU_FEROCEON - select GENERIC_CLOCKEVENTS - select MVEBU_MBUS - select PCI - select PCI_QUIRKS - select PINCTRL - select PINCTRL_KIRKWOOD - select PLAT_ORION_LEGACY - help - Support for the following Marvell Kirkwood series SoCs: - 88F6180, 88F6192 and 88F6281. - config ARCH_MV78XX0 bool "Marvell MV78xx0" select ARCH_REQUIRE_GPIOLIB @@ -635,6 +623,7 @@ config ARCH_PXA select AUTO_ZRELADDR select CLKDEV_LOOKUP select CLKSRC_MMIO + select CLKSRC_OF select GENERIC_CLOCKEVENTS select GPIO_PXA select HAVE_IDE @@ -759,61 +748,6 @@ config ARCH_S3C64XX help Samsung S3C64XX series based systems -config ARCH_S5P64X0 - bool "Samsung S5P6440 S5P6450" - select ATAGS - select CLKDEV_LOOKUP - select CLKSRC_SAMSUNG_PWM - select CPU_V6 - select GENERIC_CLOCKEVENTS - select GPIO_SAMSUNG - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_GPIO_H - select SAMSUNG_ATAGS - select SAMSUNG_WDT_RESET - help - Samsung S5P64X0 CPU based systems, such as the Samsung SMDK6440, - SMDK6450. - -config ARCH_S5PC100 - bool "Samsung S5PC100" - select ARCH_REQUIRE_GPIOLIB - select ATAGS - select CLKDEV_LOOKUP - select CLKSRC_SAMSUNG_PWM - select CPU_V7 - select GENERIC_CLOCKEVENTS - select GPIO_SAMSUNG - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_GPIO_H - select SAMSUNG_ATAGS - select SAMSUNG_WDT_RESET - help - Samsung S5PC100 series based systems - -config ARCH_S5PV210 - bool "Samsung S5PV210/S5PC110" - select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_SPARSEMEM_ENABLE - select ATAGS - select CLKDEV_LOOKUP - select CLKSRC_SAMSUNG_PWM - select CPU_V7 - select GENERIC_CLOCKEVENTS - select GPIO_SAMSUNG - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select HAVE_S3C_RTC if RTC_CLASS - select NEED_MACH_GPIO_H - select NEED_MACH_MEMORY_H - select SAMSUNG_ATAGS - help - Samsung S5PV210/S5PC110 series based systems - config ARCH_DAVINCI bool "TI DaVinci" select ARCH_HAS_HOLES_MEMORYMODEL @@ -952,8 +886,6 @@ source "arch/arm/mach-ixp4xx/Kconfig" source "arch/arm/mach-keystone/Kconfig" -source "arch/arm/mach-kirkwood/Kconfig" - source "arch/arm/mach-ks8695/Kconfig" source "arch/arm/mach-msm/Kconfig" @@ -964,6 +896,8 @@ source "arch/arm/mach-mv78xx0/Kconfig" source "arch/arm/mach-imx/Kconfig" +source "arch/arm/mach-mediatek/Kconfig" + source "arch/arm/mach-mxs/Kconfig" source "arch/arm/mach-netx/Kconfig" @@ -1005,10 +939,6 @@ source "arch/arm/mach-s3c24xx/Kconfig" source "arch/arm/mach-s3c64xx/Kconfig" -source "arch/arm/mach-s5p64x0/Kconfig" - -source "arch/arm/mach-s5pc100/Kconfig" - source "arch/arm/mach-s5pv210/Kconfig" source "arch/arm/mach-exynos/Kconfig" @@ -1555,10 +1485,12 @@ config ARM_PSCI config ARCH_NR_GPIO int default 1024 if ARCH_SHMOBILE || ARCH_TEGRA - default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX + default 512 if ARCH_EXYNOS || ARCH_KEYSTONE || SOC_OMAP5 || \ + SOC_DRA7XX || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 default 416 if ARCH_SUNXI default 392 if ARCH_U8500 default 352 if ARCH_VT8500 + default 288 if ARCH_ROCKCHIP default 264 if MACH_H4700 default 0 help @@ -1570,7 +1502,7 @@ source kernel/Kconfig.preempt config HZ_FIXED int - default 200 if ARCH_EBSA110 || ARCH_S3C24XX || ARCH_S5P64X0 || \ + default 200 if ARCH_EBSA110 || ARCH_S3C24XX || \ ARCH_S5PV210 || ARCH_EXYNOS4 default AT91_TIMER_HZ if ARCH_AT91 default SHMOBILE_TIMER_HZ if ARCH_SHMOBILE_LEGACY @@ -2051,6 +1983,8 @@ config XIP_PHYS_ADDR config KEXEC bool "Kexec system call (EXPERIMENTAL)" depends on (!SMP || PM_SLEEP_SMP) + select CRYPTO + select CRYPTO_SHA256 help kexec is a system call that implements the ability to shutdown your current kernel, and to start another kernel. It is like a reboot @@ -2195,7 +2129,6 @@ menu "Power management options" source "kernel/power/Kconfig" config ARCH_SUSPEND_POSSIBLE - depends on !ARCH_S5PC100 depends on CPU_ARM920T || CPU_ARM926T || CPU_FEROCEON || CPU_SA1100 || \ CPU_V6 || CPU_V6K || CPU_V7 || CPU_V7M || CPU_XSC3 || CPU_XSCALE || CPU_MOHAWK def_bool y diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 8f90595069a1cafb8af4c5e7db96a160cfc0b671..b11ad54f8d17fa6bfcdc388cbba397814d349bed 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -223,6 +223,14 @@ choice Say Y here if you want kernel low-level debugging support on HI3716 UART. + config DEBUG_HIX5HD2_UART + bool "Hisilicon Hix5hd2 Debug UART" + depends on ARCH_HIX5HD2 + select DEBUG_UART_PL01X + help + Say Y here if you want kernel low-level debugging support + on Hix5hd2 UART. + config DEBUG_HIGHBANK_UART bool "Kernel low-level debugging messages via Highbank UART" depends on ARCH_HIGHBANK @@ -582,7 +590,7 @@ choice on Rockchip based platforms. config DEBUG_RK3X_UART0 - bool "Kernel low-level debugging messages via Rockchip RK3X UART0" + bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART0" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help @@ -590,7 +598,7 @@ choice on Rockchip based platforms. config DEBUG_RK3X_UART1 - bool "Kernel low-level debugging messages via Rockchip RK3X UART1" + bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART1" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help @@ -598,7 +606,7 @@ choice on Rockchip based platforms. config DEBUG_RK3X_UART2 - bool "Kernel low-level debugging messages via Rockchip RK3X UART2" + bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART2" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help @@ -606,64 +614,64 @@ choice on Rockchip based platforms. config DEBUG_RK3X_UART3 - bool "Kernel low-level debugging messages via Rockchip RK3X UART3" + bool "Kernel low-level debugging messages via Rockchip RK30/RK31 UART3" depends on ARCH_ROCKCHIP select DEBUG_UART_8250 help Say Y here if you want kernel low-level debugging support on Rockchip based platforms. + config DEBUG_RK32_UART2 + bool "Kernel low-level debugging messages via Rockchip RK32 UART2" + depends on ARCH_ROCKCHIP + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Rockchip RK32xx based platforms. + config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX - bool "Use S3C UART 0 for low-level debug" + select DEBUG_S5PV210_UART if ARCH_S5PV210 + bool "Use Samsung S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 0. The port must have been initialised by the boot-loader before use. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. - config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX - bool "Use S3C UART 1 for low-level debug" + select DEBUG_S5PV210_UART if ARCH_S5PV210 + bool "Use Samsung S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 1. The port must have been initialised by the boot-loader before use. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. - config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG select DEBUG_EXYNOS_UART if ARCH_EXYNOS select DEBUG_S3C24XX_UART if ARCH_S3C24XX - bool "Use S3C UART 2 for low-level debug" + select DEBUG_S5PV210_UART if ARCH_S5PV210 + bool "Use Samsung S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 2. The port must have been initialised by the boot-loader before use. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. - config DEBUG_S3C_UART3 - depends on PLAT_SAMSUNG && ARCH_EXYNOS - select DEBUG_EXYNOS_UART - bool "Use S3C UART 3 for low-level debug" + depends on PLAT_SAMSUNG && (ARCH_EXYNOS || ARCH_S5PV210) + select DEBUG_EXYNOS_UART if ARCH_EXYNOS + select DEBUG_S5PV210_UART if ARCH_S5PV210 + bool "Use Samsung S3C UART 3 for low-level debug" help Say Y here if you want the debug print routines to direct their output to UART 3. The port must have been initialised by the boot-loader before use. - The uncompressor code port configuration is now handled - by CONFIG_S3C_LOWLEVEL_UART_PORT. - config DEBUG_S3C2410_UART0 depends on ARCH_S3C24XX select DEBUG_S3C2410_UART @@ -715,6 +723,14 @@ choice Say Y here if you want kernel low-level debugging support on Allwinner A1X based platforms on the UART1. + config DEBUG_SUNXI_R_UART + bool "Kernel low-level debugging messages via sunXi R_UART" + depends on MACH_SUN6I || MACH_SUN8I + select DEBUG_UART_8250 + help + Say Y here if you want kernel low-level debugging support + on Allwinner A31/A23 based platforms on the R_UART. + config TEGRA_DEBUG_UART_AUTO_ODMDATA bool "Kernel low-level debugging messages via Tegra UART via ODMDATA" depends on ARCH_TEGRA @@ -949,6 +965,9 @@ config DEBUG_S3C2410_UART config DEBUG_S3C24XX_UART bool +config DEBUG_S5PV210_UART + bool + config DEBUG_OMAP2PLUS_UART bool depends on ARCH_OMAP2PLUS @@ -991,6 +1010,7 @@ config DEBUG_STI_UART config DEBUG_LL_INCLUDE string default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250 + default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2 default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X default "debug/exynos.S" if DEBUG_EXYNOS_UART default "debug/efm32.S" if DEBUG_LL_UART_EFM32 @@ -1009,6 +1029,7 @@ config DEBUG_LL_INCLUDE default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART + default "debug/s5pv210.S" if DEBUG_S5PV210_UART default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/sti.S" if DEBUG_STI_UART default "debug/tegra.S" if DEBUG_TEGRA_UART @@ -1033,7 +1054,7 @@ config DEBUG_UART_8250 def_bool ARCH_DOVE || ARCH_EBSA110 || \ (FOOTBRIDGE && !DEBUG_DC21285_PORT) || \ ARCH_GEMINI || ARCH_IOP13XX || ARCH_IOP32X || \ - ARCH_IOP33X || ARCH_IXP4XX || ARCH_KIRKWOOD || \ + ARCH_IOP33X || ARCH_IXP4XX || \ ARCH_LPC32XX || ARCH_MV78XX0 || ARCH_ORION5X || ARCH_RPC config DEBUG_UART_PHYS @@ -1043,6 +1064,7 @@ config DEBUG_UART_PHYS default 0x01c28400 if DEBUG_SUNXI_UART1 default 0x01d0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0x01d0d000 if DEBUG_DAVINCI_DA8XX_UART2 + default 0x01f02800 if DEBUG_SUNXI_R_UART default 0x02530c00 if DEBUG_KEYSTONE_UART0 default 0x02531000 if DEBUG_KEYSTONE_UART1 default 0x03010fe0 if ARCH_RPC @@ -1089,13 +1111,14 @@ config DEBUG_UART_PHYS default 0xe0000000 if ARCH_SPEAR13XX default 0xf0000be0 if ARCH_EBSA110 default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE - default 0xf1012000 if ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \ + default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \ ARCH_ORION5X default 0xf7fc9000 if DEBUG_BERLIN_UART - default 0xf8b00000 if DEBUG_HI3716_UART + default 0xf8b00000 if DEBUG_HIX5HD2_UART default 0xf991e000 if DEBUG_QCOM_UARTDM default 0xfcb00000 if DEBUG_HI3620_UART default 0xfe800000 if ARCH_IOP32X + default 0xff690000 if DEBUG_RK32_UART2 default 0xffc02000 if DEBUG_SOCFPGA_UART default 0xffd82340 if ARCH_IOP13XX default 0xfff36000 if DEBUG_HIGHBANK_UART @@ -1118,6 +1141,7 @@ config DEBUG_UART_VIRT default 0xf1600000 if ARCH_INTEGRATOR default 0xf1c28000 if DEBUG_SUNXI_UART0 default 0xf1c28400 if DEBUG_SUNXI_UART1 + default 0xf1f02800 if DEBUG_SUNXI_R_UART default 0xf2100000 if DEBUG_PXA_UART1 default 0xf4090000 if ARCH_LPC32XX default 0xf4200000 if ARCH_GEMINI @@ -1144,7 +1168,7 @@ config DEBUG_UART_VIRT default 0xfe230000 if DEBUG_PICOXCELL_UART default 0xfe300000 if DEBUG_BCM_KONA_UART default 0xfe800000 if ARCH_IOP32X - default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HI3716_UART + default 0xfeb00000 if DEBUG_HI3620_UART || DEBUG_HIX5HD2_UART default 0xfeb24000 if DEBUG_RK3X_UART0 default 0xfeb26000 if DEBUG_RK3X_UART1 default 0xfeb30c00 if DEBUG_KEYSTONE_UART0 @@ -1152,9 +1176,9 @@ config DEBUG_UART_VIRT default 0xfec02000 if DEBUG_SOCFPGA_UART default 0xfec12000 if DEBUG_MVEBU_UART || DEBUG_MVEBU_UART_ALTERNATE default 0xfec20000 if DEBUG_DAVINCI_DMx_UART0 + default 0xfec90000 if DEBUG_RK32_UART2 default 0xfed0c000 if DEBUG_DAVINCI_DA8XX_UART1 default 0xfed0d000 if DEBUG_DAVINCI_DA8XX_UART2 - default 0xfed12000 if ARCH_KIRKWOOD default 0xfed60000 if DEBUG_RK29_UART0 default 0xfed64000 if DEBUG_RK29_UART1 || DEBUG_RK3X_UART2 default 0xfed68000 if DEBUG_RK29_UART2 || DEBUG_RK3X_UART3 @@ -1186,7 +1210,7 @@ config DEBUG_UART_8250_WORD ARCH_KEYSTONE || \ DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \ DEBUG_DAVINCI_DA8XX_UART2 || \ - DEBUG_BCM_KONA_UART + DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 config DEBUG_UART_8250_FLOW_CONTROL bool "Enable flow control for 8250 UART" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 6721fab13734daca10fd1d4050c196c7004fab84..0ce9d0f71f2a318c240e60ab019d155dc94e6925 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -127,6 +127,9 @@ CHECKFLAGS += -D__arm__ #Default value head-y := arch/arm/kernel/head$(MMUEXT).o + +# Text offset. This list is sorted numerically by address in order to +# provide a means to avoid/resolve conflicts in multi-arch kernels. textofs-y := 0x00008000 textofs-$(CONFIG_ARCH_CLPS711X) := 0x00028000 # We don't want the htc bootloader to corrupt kernel during resume @@ -156,14 +159,13 @@ machine-$(CONFIG_ARCH_EP93XX) += ep93xx machine-$(CONFIG_ARCH_EXYNOS) += exynos machine-$(CONFIG_ARCH_GEMINI) += gemini machine-$(CONFIG_ARCH_HIGHBANK) += highbank -machine-$(CONFIG_ARCH_HI3xxx) += hisi +machine-$(CONFIG_ARCH_HISI) += hisi machine-$(CONFIG_ARCH_INTEGRATOR) += integrator machine-$(CONFIG_ARCH_IOP13XX) += iop13xx machine-$(CONFIG_ARCH_IOP32X) += iop32x machine-$(CONFIG_ARCH_IOP33X) += iop33x machine-$(CONFIG_ARCH_IXP4XX) += ixp4xx machine-$(CONFIG_ARCH_KEYSTONE) += keystone -machine-$(CONFIG_ARCH_KIRKWOOD) += kirkwood machine-$(CONFIG_ARCH_KS8695) += ks8695 machine-$(CONFIG_ARCH_LPC32XX) += lpc32xx machine-$(CONFIG_ARCH_MMP) += mmp @@ -172,6 +174,7 @@ machine-$(CONFIG_ARCH_MSM) += msm machine-$(CONFIG_ARCH_MV78XX0) += mv78xx0 machine-$(CONFIG_ARCH_MVEBU) += mvebu machine-$(CONFIG_ARCH_MXC) += imx +machine-$(CONFIG_ARCH_MEDIATEK) += mediatek machine-$(CONFIG_ARCH_MXS) += mxs machine-$(CONFIG_ARCH_NETX) += netx machine-$(CONFIG_ARCH_NOMADIK) += nomadik @@ -187,8 +190,6 @@ machine-$(CONFIG_ARCH_ROCKCHIP) += rockchip machine-$(CONFIG_ARCH_RPC) += rpc machine-$(CONFIG_ARCH_S3C24XX) += s3c24xx machine-$(CONFIG_ARCH_S3C64XX) += s3c64xx -machine-$(CONFIG_ARCH_S5P64X0) += s5p64x0 -machine-$(CONFIG_ARCH_S5PC100) += s5pc100 machine-$(CONFIG_ARCH_S5PV210) += s5pv210 machine-$(CONFIG_ARCH_SA1100) += sa1100 machine-$(CONFIG_ARCH_SHMOBILE) += shmobile @@ -212,11 +213,11 @@ machine-$(CONFIG_PLAT_SPEAR) += spear plat-$(CONFIG_ARCH_EXYNOS) += samsung plat-$(CONFIG_ARCH_OMAP) += omap plat-$(CONFIG_ARCH_S3C64XX) += samsung +plat-$(CONFIG_ARCH_S5PV210) += samsung plat-$(CONFIG_PLAT_IOP) += iop plat-$(CONFIG_PLAT_ORION) += orion plat-$(CONFIG_PLAT_PXA) += pxa plat-$(CONFIG_PLAT_S3C24XX) += samsung -plat-$(CONFIG_PLAT_S5P) += samsung plat-$(CONFIG_PLAT_VERSATILE) += versatile ifeq ($(CONFIG_ARCH_EBSA110),y) @@ -240,7 +241,7 @@ MACHINE := endif machdirs := $(patsubst %,arch/arm/mach-%/,$(machine-y)) -platdirs := $(patsubst %,arch/arm/plat-%/,$(plat-y)) +platdirs := $(patsubst %,arch/arm/plat-%/,$(sort $(plat-y))) ifneq ($(CONFIG_ARCH_MULTIPLATFORM),y) ifeq ($(KBUILD_SRC),) diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index 68c918362b79a7dba1baf799697019be2fb70912..76a50ecae1c3b592cc120f9fb8b463299926deab 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -81,7 +81,7 @@ ZTEXTADDR := 0 ZBSSADDR := ALIGN(8) endif -SEDFLAGS = s/TEXT_START/$(ZTEXTADDR)/;s/BSS_START/$(ZBSSADDR)/ +CPPFLAGS_vmlinux.lds := -DTEXT_START="$(ZTEXTADDR)" -DBSS_START="$(ZBSSADDR)" suffix_$(CONFIG_KERNEL_GZIP) = gzip suffix_$(CONFIG_KERNEL_LZO) = lzo @@ -199,8 +199,5 @@ CFLAGS_font.o := -Dstatic= $(obj)/font.c: $(FONTC) $(call cmd,shipped) -$(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG) - @sed "$(SEDFLAGS)" < $< > $@ - $(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S $(call cmd,shipped) diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 3a8b32df6b31e0eafc8f31ffa83eab07559f6d72..413fd94b53012dacc6596d2e9b225c04a7dab97a 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -125,9 +125,11 @@ start: THUMB( adr r12, BSYM(1f) ) THUMB( bx r12 ) - .word 0x016f2818 @ Magic numbers to help the loader - .word start @ absolute load/run zImage address - .word _edata @ zImage end address + .word _magic_sig @ Magic numbers to help the loader + .word _magic_start @ absolute load/run zImage address + .word _magic_end @ zImage end address + .word 0x04030201 @ endianness flag + THUMB( .thumb ) 1: ARM_BE8( setend be ) @ go BE8 if compiled for BE8 diff --git a/arch/arm/boot/compressed/vmlinux.lds.in b/arch/arm/boot/compressed/vmlinux.lds.S similarity index 81% rename from arch/arm/boot/compressed/vmlinux.lds.in rename to arch/arm/boot/compressed/vmlinux.lds.S index 4919f2ac8b89709a6cd3929603b1f3fc401293c5..2b60b843ac5e9517f06e3e20190afa983fa7d21f 100644 --- a/arch/arm/boot/compressed/vmlinux.lds.in +++ b/arch/arm/boot/compressed/vmlinux.lds.S @@ -1,12 +1,20 @@ /* - * linux/arch/arm/boot/compressed/vmlinux.lds.in - * * Copyright (C) 2000 Russell King * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#ifdef CONFIG_CPU_ENDIAN_BE8 +#define ZIMAGE_MAGIC(x) ( (((x) >> 24) & 0x000000ff) | \ + (((x) >> 8) & 0x0000ff00) | \ + (((x) << 8) & 0x00ff0000) | \ + (((x) << 24) & 0xff000000) ) +#else +#define ZIMAGE_MAGIC(x) (x) +#endif + OUTPUT_ARCH(arm) ENTRY(_start) SECTIONS @@ -57,6 +65,10 @@ SECTIONS .pad : { BYTE(0); . = ALIGN(8); } _edata = .; + _magic_sig = ZIMAGE_MAGIC(0x016f2818); + _magic_start = ZIMAGE_MAGIC(_start); + _magic_end = ZIMAGE_MAGIC(_edata); + . = BSS_START; __bss_start = .; .bss : { *(.bss) } @@ -73,4 +85,3 @@ SECTIONS .stab.indexstr 0 : { *(.stab.indexstr) } .comment 0 : { *(.comment) } } - diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index adb5ed9e269e196a55c380002d266062fd06c3b7..b8c5cd3ddeb9c0f10e18cff41f8b0aaf33396765 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -59,6 +59,8 @@ dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ berlin2cd-google-chromecast.dtb \ berlin2q-marvell-dmp.dtb +dtb-$(CONFIG_ARCH_BRCMSTB) += \ + bcm7445-bcm97445svmb.dtb dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \ da850-evm.dtb dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb @@ -66,7 +68,9 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ exynos4210-universal_c210.dtb \ + exynos4412-odroidu3.dtb \ exynos4412-odroidx.dtb \ + exynos4412-odroidx2.dtb \ exynos4412-origen.dtb \ exynos4412-smdk4412.dtb \ exynos4412-tiny4412.dtb \ @@ -83,6 +87,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos5440-ssdk5440.dtb \ exynos5800-peach-pi.dtb dtb-$(CONFIG_ARCH_HI3xxx) += hi3620-hi4511.dtb +dtb-$(CONFIG_ARCH_HIX5HD2) += hisi-x5hd2-dkb.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \ ecx-2000.dtb dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ @@ -90,9 +95,9 @@ dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \ dtb-$(CONFIG_ARCH_KEYSTONE) += k2hk-evm.dtb \ k2l-evm.dtb \ k2e-evm.dtb -kirkwood := \ - kirkwood-b3.dtb \ +dtb-$(CONFIG_MACH_KIRKWOOD) += kirkwood-b3.dtb \ kirkwood-cloudbox.dtb \ + kirkwood-d2net.dtb \ kirkwood-db-88f6281.dtb \ kirkwood-db-88f6282.dtb \ kirkwood-dns320.dtb \ @@ -123,6 +128,8 @@ kirkwood := \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ kirkwood-mv88f6281gtw-ge.dtb \ + kirkwood-net2big.dtb \ + kirkwood-net5big.dtb \ kirkwood-netgear_readynas_duo_v2.dtb \ kirkwood-netgear_readynas_nv+_v2.dtb \ kirkwood-ns2.dtb \ @@ -150,17 +157,19 @@ kirkwood := \ kirkwood-ts219-6282.dtb \ kirkwood-ts419-6281.dtb \ kirkwood-ts419-6282.dtb -dtb-$(CONFIG_ARCH_KIRKWOOD) += $(kirkwood) -dtb-$(CONFIG_MACH_KIRKWOOD) += $(kirkwood) dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MXC) += \ imx25-eukrea-mbimxsd25-baseboard.dtb \ + imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dtb \ + imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dtb \ + imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dtb \ imx25-karo-tx25.dtb \ imx25-pdk.dtb \ imx27-apf27.dtb \ imx27-apf27dev.dtb \ + imx27-eukrea-mbimxsd27-baseboard.dtb \ imx27-pdk.dtb \ imx27-phytec-phycore-rdk.dtb \ imx27-phytec-phycard-s-rdk.dtb \ @@ -182,6 +191,8 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx53-tx53-x03x.dtb \ imx53-tx53-x13x.dtb \ imx53-voipac-bsb.dtb \ + imx6dl-aristainetos_4.dtb \ + imx6dl-aristainetos_7.dtb \ imx6dl-cubox-i.dtb \ imx6dl-dfi-fs700-m60.dtb \ imx6dl-gw51xx.dtb \ @@ -191,11 +202,16 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6dl-hummingboard.dtb \ imx6dl-nitrogen6x.dtb \ imx6dl-phytec-pbab01.dtb \ + imx6dl-rex-basic.dtb \ imx6dl-riotboard.dtb \ imx6dl-sabreauto.dtb \ imx6dl-sabrelite.dtb \ imx6dl-sabresd.dtb \ + imx6dl-tx6dl-comtft.dtb \ + imx6dl-tx6u-801x.dtb \ + imx6dl-tx6u-811x.dtb \ imx6dl-wandboard.dtb \ + imx6dl-wandboard-revb1.dtb \ imx6q-arm2.dtb \ imx6q-cm-fx6.dtb \ imx6q-cubox-i.dtb \ @@ -209,13 +225,21 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-gw54xx.dtb \ imx6q-nitrogen6x.dtb \ imx6q-phytec-pbab01.dtb \ + imx6q-rex-pro.dtb \ imx6q-sabreauto.dtb \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ imx6q-sbc6x.dtb \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ + imx6q-wandboard-revb1.dtb \ + imx6q-tx6q-1010.dtb \ + imx6q-tx6q-1010-comtft.dtb \ + imx6q-tx6q-1020.dtb \ + imx6q-tx6q-1020-comtft.dtb \ + imx6q-tx6q-1110.dtb \ imx6sl-evk.dtb \ + imx6sx-sdb.dtb \ vf610-colibri.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb @@ -291,7 +315,8 @@ dtb-$(CONFIG_SOC_AM33XX) += am335x-base0033.dtb \ am335x-boneblack.dtb \ am335x-evm.dtb \ am335x-evmsk.dtb \ - am335x-nano.dtb + am335x-nano.dtb \ + am335x-pepper.dtb dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ omap4-panda.dtb \ omap4-panda-a4.dtb \ @@ -301,6 +326,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \ omap4-var-dvk-om44.dtb \ omap4-var-stk-om44.dtb dtb-$(CONFIG_SOC_AM43XX) += am43x-epos-evm.dtb \ + am437x-sk-evm.dtb \ am437x-gp-evm.dtb dtb-$(CONFIG_SOC_OMAP5) += omap5-cm-t54.dtb \ omap5-sbc-t54.dtb \ @@ -318,16 +344,25 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8084-mtp.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += \ + rk3066a-bqcurie2.dtb \ + rk3188-radxarock.dtb \ + rk3288-evb-act8846.dtb \ + rk3288-evb-rk808.dtb dtb-$(CONFIG_ARCH_S3C24XX) += s3c2416-smdk2416.dtb dtb-$(CONFIG_ARCH_S3C64XX) += s3c6410-mini6410.dtb \ s3c6410-smdk6410.dtb +dtb-$(CONFIG_ARCH_S5PV210) += s5pv210-aquila.dtb \ + s5pv210-goni.dtb \ + s5pv210-smdkc110.dtb \ + s5pv210-smdkv210.dtb \ + s5pv210-torbreck.dtb dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \ r8a7740-armadillo800eva.dtb \ r8a7778-bockw.dtb \ r8a7778-bockw-reference.dtb \ r8a7740-armadillo800eva-reference.dtb \ r8a7779-marzen.dtb \ - r8a7779-marzen-reference.dtb \ r8a7791-koelsch.dtb \ r8a7790-lager.dtb \ sh73a0-kzm9g.dtb \ @@ -339,7 +374,8 @@ dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \ r7s72100-genmai.dtb \ r8a7791-henninger.dtb \ r8a7791-koelsch.dtb \ - r8a7790-lager.dtb + r8a7790-lager.dtb \ + r8a7779-marzen.dtb dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \ socfpga_cyclone5_socdk.dtb \ socfpga_cyclone5_sockit.dtb \ @@ -360,6 +396,7 @@ dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \ stih416-b2020e.dtb dtb-$(CONFIG_MACH_SUN4I) += \ sun4i-a10-a1000.dtb \ + sun4i-a10-ba10-tvbox.dtb \ sun4i-a10-cubieboard.dtb \ sun4i-a10-mini-xplus.dtb \ sun4i-a10-hackberry.dtb \ @@ -374,12 +411,16 @@ dtb-$(CONFIG_MACH_SUN5I) += \ dtb-$(CONFIG_MACH_SUN6I) += \ sun6i-a31-app4-evb1.dtb \ sun6i-a31-colombus.dtb \ + sun6i-a31-hummingbird.dtb \ sun6i-a31-m9.dtb dtb-$(CONFIG_MACH_SUN7I) += \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ sun7i-a20-i12-tvbox.dtb \ - sun7i-a20-olinuxino-micro.dtb + sun7i-a20-olinuxino-micro.dtb \ + sun7i-a20-pcduino3.dtb +dtb-$(CONFIG_MACH_SUN8I) += \ + sun8i-a23-ippo-q8h-v5.dtb dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-iris-512.dtb \ tegra20-medcom-wide.dtb \ @@ -390,6 +431,7 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ tegra20-trimslice.dtb \ tegra20-ventana.dtb \ tegra20-whistler.dtb \ + tegra30-apalis-eval.dtb \ tegra30-beaver.dtb \ tegra30-cardhu-a02.dtb \ tegra30-cardhu-a04.dtb \ @@ -419,7 +461,9 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ wm8650-mid.dtb \ wm8750-apc8750.dtb \ wm8850-w70v2.dtb -dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb \ +dtb-$(CONFIG_ARCH_ZYNQ) += \ + zynq-parallella.dtb \ + zynq-zc702.dtb \ zynq-zc706.dtb \ zynq-zed.dtb dtb-$(CONFIG_MACH_ARMADA_370) += \ @@ -437,11 +481,13 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ armada-xp-gp.dtb \ - armada-xp-netgear-rn2120.dtb \ + armada-xp-lenovo-ix4-300d.dtb \ armada-xp-matrix.dtb \ + armada-xp-netgear-rn2120.dtb \ armada-xp-openblocks-ax3-4.dtb dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ + dove-cubox-es.dtb \ dove-d2plug.dtb \ dove-d3plug.dtb \ dove-dove-db.dtb diff --git a/arch/arm/boot/dts/aks-cdu.dts b/arch/arm/boot/dts/aks-cdu.dts index 54cb5cf8604aaeb2a164155ea40a651a47690e8c..d9c50fbb49d26415bed4c0aeaab5aa3a2dac3347 100644 --- a/arch/arm/boot/dts/aks-cdu.dts +++ b/arch/arm/boot/dts/aks-cdu.dts @@ -16,6 +16,12 @@ chosen { bootargs = "console=ttyS0,115200 ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs"; }; + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + }; + ahb { apb { usart0: serial@fffb0000 { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 80a3b215e7d63c1b669c7d6fc2ad6777609e5ede..df5fee6b6b4bcf7ac58d33fc1d25b58cb07890a8 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -149,12 +149,113 @@ sound { "Headphone Jack", "HPLOUT", "Headphone Jack", "HPROUT"; }; + + panel { + compatible = "ti,tilcdc,panel"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_pins_default>; + pinctrl-1 = <&lcd_pins_sleep>; + status = "okay"; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + display-timings { + 480x272 { + hactive = <480>; + vactive = <272>; + hback-porch = <43>; + hfront-porch = <8>; + hsync-len = <4>; + vback-porch = <12>; + vfront-porch = <4>; + vsync-len = <10>; + clock-frequency = <9000000>; + hsync-active = <0>; + vsync-active = <0>; + }; + }; + }; }; &am33xx_pinmux { pinctrl-names = "default"; pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>; + lcd_pins_default: lcd_pins_default { + pinctrl-single,pins = < + 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data23 */ + 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data22 */ + 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data21 */ + 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data20 */ + 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data19 */ + 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data18 */ + 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data17 */ + 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data16 */ + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + lcd_pins_sleep: lcd_pins_sleep { + pinctrl-single,pins = < + 0x20 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad8.lcd_data23 */ + 0x24 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad9.lcd_data22 */ + 0x28 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad10.lcd_data21 */ + 0x2c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad11.lcd_data20 */ + 0x30 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad12.lcd_data19 */ + 0x34 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad13.lcd_data18 */ + 0x38 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad14.lcd_data17 */ + 0x3c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad15.lcd_data16 */ + 0xa0 (PULL_DISABLE | MUX_MODE7) /* lcd_data0.lcd_data0 */ + 0xa4 (PULL_DISABLE | MUX_MODE7) /* lcd_data1.lcd_data1 */ + 0xa8 (PULL_DISABLE | MUX_MODE7) /* lcd_data2.lcd_data2 */ + 0xac (PULL_DISABLE | MUX_MODE7) /* lcd_data3.lcd_data3 */ + 0xb0 (PULL_DISABLE | MUX_MODE7) /* lcd_data4.lcd_data4 */ + 0xb4 (PULL_DISABLE | MUX_MODE7) /* lcd_data5.lcd_data5 */ + 0xb8 (PULL_DISABLE | MUX_MODE7) /* lcd_data6.lcd_data6 */ + 0xbc (PULL_DISABLE | MUX_MODE7) /* lcd_data7.lcd_data7 */ + 0xc0 (PULL_DISABLE | MUX_MODE7) /* lcd_data8.lcd_data8 */ + 0xc4 (PULL_DISABLE | MUX_MODE7) /* lcd_data9.lcd_data9 */ + 0xc8 (PULL_DISABLE | MUX_MODE7) /* lcd_data10.lcd_data10 */ + 0xcc (PULL_DISABLE | MUX_MODE7) /* lcd_data11.lcd_data11 */ + 0xd0 (PULL_DISABLE | MUX_MODE7) /* lcd_data12.lcd_data12 */ + 0xd4 (PULL_DISABLE | MUX_MODE7) /* lcd_data13.lcd_data13 */ + 0xd8 (PULL_DISABLE | MUX_MODE7) /* lcd_data14.lcd_data14 */ + 0xdc (PULL_DISABLE | MUX_MODE7) /* lcd_data15.lcd_data15 */ + 0xe0 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_vsync.lcd_vsync */ + 0xe4 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_hsync.lcd_hsync */ + 0xe8 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_pclk.lcd_pclk */ + 0xec (PIN_INPUT_PULLDOWN | MUX_MODE7) /* lcd_ac_bias_en.lcd_ac_bias_en */ + >; + }; + + user_leds_s0: user_leds_s0 { pinctrl-single,pins = < 0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */ @@ -573,3 +674,7 @@ tsc { ti,wire-config = <0x00 0x11 0x22 0x33>; }; }; + +&lcdc { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am335x-pepper.dts b/arch/arm/boot/dts/am335x-pepper.dts new file mode 100644 index 0000000000000000000000000000000000000000..0d35ab64641c4a4c906dbf471a4e2d06b51651fe --- /dev/null +++ b/arch/arm/boot/dts/am335x-pepper.dts @@ -0,0 +1,653 @@ +/* + * Copyright (C) 2014 Gumstix, Inc. - https://www.gumstix.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include +#include "am33xx.dtsi" + +/ { + model = "Gumstix Pepper"; + compatible = "gumstix,am335x-pepper", "ti,am33xx"; + + cpus { + cpu@0 { + cpu0-supply = <&dcdc3_reg>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x80000000 0x20000000>; /* 512 MB */ + }; + + buttons: user_buttons { + compatible = "gpio-keys"; + }; + + leds: user_leds { + compatible = "gpio-leds"; + }; + + panel: lcd_panel { + compatible = "ti,tilcdc,panel"; + }; + + sound: sound_iface { + compatible = "ti,da830-evm-audio"; + }; + + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + }; + + v3v3c_reg: fixedregulator@1 { + compatible = "regulator-fixed"; + }; + + vdd5_reg: fixedregulator@2 { + compatible = "regulator-fixed"; + }; +}; + +/* I2C Busses */ +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + + clock-frequency = <400000>; + + tps: tps@24 { + reg = <0x24>; + }; + + eeprom: eeprom@50 { + compatible = "at,24c256"; + reg = <0x50>; + }; + + audio_codec: tlv320aic3106@1b { + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + }; + + accel: lis331dlh@1d { + compatible = "st,lis3lv02d"; + reg = <0x1d>; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; +}; + +&am33xx_pinmux { + i2c0_pins: pinmux_i2c0 { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + i2c1_pins: pinmux_i2c1 { + pinctrl-single,pins = < + 0x10C (PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_crs,i2c1_sda */ + 0x110 (PIN_INPUT_PULLUP | MUX_MODE3) /* mii1_rxerr,i2c1_scl */ + >; + }; +}; + +/* Accelerometer */ +&accel { + pinctrl-names = "default"; + pinctrl-0 = <&accel_pins>; + + Vdd-supply = <&ldo3_reg>; + Vdd_IO-supply = <&ldo3_reg>; + st,irq1-click; + st,wakeup-x-lo; + st,wakeup-x-hi; + st,wakeup-y-lo; + st,wakeup-y-hi; + st,wakeup-z-lo; + st,wakeup-z-hi; + st,min-limit-x = <92>; + st,max-limit-x = <14>; + st,min-limit-y = <14>; + st,max-limit-y = <92>; + st,min-limit-z = <92>; + st,max-limit-z = <14>; +}; + +&am33xx_pinmux { + accel_pins: pinmux_accel { + pinctrl-single,pins = < + 0x98 (PIN_INPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */ + >; + }; +}; + +/* Audio */ +&audio_codec { + status = "okay"; + + gpio-reset = <&gpio1 16 GPIO_ACTIVE_LOW>; + AVDD-supply = <&ldo3_reg>; + IOVDD-supply = <&ldo3_reg>; + DRVDD-supply = <&ldo3_reg>; + DVDD-supply = <&dcdc1_reg>; +}; + +&sound { + ti,model = "AM335x-EVM"; + ti,audio-codec = <&audio_codec>; + ti,mcasp-controller = <&mcasp0>; + ti,codec-clock-rate = <12000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In"; +}; + +&mcasp0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&audio_pins>; + + op-mode = <0>; /* MCASP_ISS_MODE */ + tdm-slots = <2>; + serial-dir = < + 1 2 0 0 + 0 0 0 0 + 0 0 0 0 + 0 0 0 0 + >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&am33xx_pinmux { + audio_pins: pinmux_audio { + pinctrl-single,pins = < + 0x1AC (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */ + 0x194 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */ + 0x190 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */ + 0x198 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */ + 0x1A8 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr1.mcasp0_axr1 */ + 0x40 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a0.gpio1_16 */ + >; + }; +}; + +/* Display: 24-bit LCD Screen */ +&panel { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + panel-info { + ac-bias = <255>; + ac-bias-intrpt = <0>; + dma-burst-sz = <16>; + bpp = <32>; + fdd = <0x80>; + sync-edge = <0>; + sync-ctrl = <1>; + raster-order = <0>; + fifo-th = <0>; + }; + display-timings { + native-mode = <&timing0>; + timing0: 480x272 { + clock-frequency = <18400000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <4>; + hsync-len = <41>; + vfront-porch = <4>; + vback-porch = <2>; + vsync-len = <10>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; +}; + +&lcdc { + status = "okay"; +}; + +&am33xx_pinmux { + lcd_pins: pinmux_lcd { + pinctrl-single,pins = < + 0xa0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */ + 0xa4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */ + 0xa8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */ + 0xac (PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */ + 0xb0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */ + 0xb4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */ + 0xb8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */ + 0xbc (PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */ + 0xc0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */ + 0xc4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */ + 0xc8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */ + 0xcc (PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */ + 0xd0 (PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */ + 0xd4 (PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */ + 0xd8 (PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */ + 0xdc (PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */ + 0x20 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad8.lcd_data16 */ + 0x24 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad9.lcd_data17 */ + 0x28 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad10.lcd_data18 */ + 0x2c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad11.lcd_data19 */ + 0x30 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad12.lcd_data20 */ + 0x34 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad13.lcd_data21 */ + 0x38 (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad14.lcd_data22 */ + 0x3c (PIN_OUTPUT | MUX_MODE1) /* gpmc_ad15.lcd_data23 */ + 0xe0 (PIN_OUTPUT | MUX_MODE0) /* lcd_vsync.lcd_vsync */ + 0xe4 (PIN_OUTPUT | MUX_MODE0) /* lcd_hsync.lcd_hsync */ + 0xe8 (PIN_OUTPUT | MUX_MODE0) /* lcd_pclk.lcd_pclk */ + 0xec (PIN_OUTPUT | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */ + /* Display Enable */ + 0x6c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a11.gpio1_27 */ + >; + }; +}; + +/* Ethernet */ +&cpsw_emac0 { + status = "okay"; + phy_id = <&davinci_mdio>, <0>; + phy-mode = "rgmii"; +}; + +&cpsw_emac1 { + status = "okay"; + phy_id = <&davinci_mdio>, <1>; + phy-mode = "rgmii"; +}; + +&davinci_mdio { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; +}; + +&mac { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <ðernet_pins>; +}; + + +&am33xx_pinmux { + ethernet_pins: pinmux_ethernet { + pinctrl-single,pins = < + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x118 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x12c (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */ + 0x130 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */ + 0x134 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */ + 0x138 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */ + 0x13c (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */ + 0x140 (PIN_INPUT_PULLUP | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */ + /* ethernet interrupt */ + 0x144 (PIN_INPUT_PULLUP | MUX_MODE7) /* rmii2_refclk.gpio0_29 */ + /* ethernet PHY nReset */ + 0x108 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* mii1_col.gpio3_0 */ + >; + }; + + mdio_pins: pinmux_mdio { + pinctrl-single,pins = < + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; +}; + +/* MMC */ +&mmc1 { + /* Bootable SD card slot */ + status = "okay"; + vmmc-supply = <&ldo3_reg>; + bus-width = <4>; + pinctrl-names = "default"; + pinctrl-0 = <&sd_pins>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; +}; + +&mmc2 { + /* eMMC (not populated) on MMC #2 */ + status = "disabled"; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_pins>; + vmmc-supply = <&ldo3_reg>; + bus-width = <8>; + ti,non-removable; +}; + +&edma { + /* Map eDMA MMC2 Events from Crossbar */ + ti,edma-xbar-event-map = /bits/ 16 <1 12 + 2 13>; +}; + + +&mmc3 { + /* Wifi & Bluetooth on MMC #3 */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&wireless_pins>; + vmmmc-supply = <&v3v3c_reg>; + bus-width = <4>; + ti,non-removable; + dmas = <&edma 12 + &edma 13>; + dma-names = "tx", "rx"; +}; + + +&am33xx_pinmux { + sd_pins: pinmux_sd_card { + pinctrl-single,pins = < + 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */ + 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */ + 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */ + 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */ + 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */ + 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */ + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + emmc_pins: pinmux_emmc { + pinctrl-single,pins = < + 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */ + 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */ + 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */ + 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */ + 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */ + 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */ + 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */ + 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */ + 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */ + 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */ + /* EMMC nReset */ + 0x74 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + >; + }; + wireless_pins: pinmux_wireless { + pinctrl-single,pins = < + 0x44 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a1.mmc2_dat0 */ + 0x48 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a2.mmc2_dat1 */ + 0x4c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_a3.mmc2_dat2 */ + 0x78 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_ben1.mmc2_dat3 */ + 0x88 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_csn3.mmc2_cmd */ + 0x8c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_clk.mmc1_clk */ + /* WLAN nReset */ + 0x60 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */ + /* WLAN nPower down */ + 0x70 (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_wait0.gpio0_30 */ + /* 32kHz Clock */ + 0x1b4 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */ + >; + }; +}; + +/* Power */ +&vbat { + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; +}; + +&v3v3c_reg { + regulator-name = "v3v3c_reg"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vbat>; +}; + +&vdd5_reg { + regulator-name = "vdd5_reg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vbat>; +}; + +/include/ "tps65217.dtsi" + +&tps { + backlight { + isel = <1>; /* ISET1 */ + fdim = <200>; /* TPS65217_BL_FDIM_200HZ */ + default-brightness = <80>; + }; + + regulators { + dcdc1_reg: regulator@0 { + /* VDD_1V8 system supply */ + }; + + dcdc2_reg: regulator@1 { + /* VDD_CORE voltage limits 0.95V - 1.26V with +/-4% tolerance */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1325000>; + regulator-boot-on; + }; + + dcdc3_reg: regulator@2 { + /* VDD_MPU voltage limits 0.95V - 1.1V with +/-4% tolerance */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1150000>; + regulator-boot-on; + }; + + ldo1_reg: regulator@3 { + /* VRTC 1.8V always-on supply */ + regulator-always-on; + }; + + ldo2_reg: regulator@4 { + /* 3.3V rail */ + }; + + ldo3_reg: regulator@5 { + /* VDD_3V3A 3.3V rail */ + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo4_reg: regulator@6 { + /* VDD_3V3B 3.3V rail */ + }; + }; +}; + +/* SPI Busses */ +&spi0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; +}; + +&am33xx_pinmux { + spi0_pins: pinmux_spi0 { + pinctrl-single,pins = < + 0x150 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_sclk.spi0_sclk */ + 0x15C (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_cs0.spi0_cs0 */ + 0x154 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d0.spi0_d0 */ + 0x158 (PIN_INPUT_PULLUP | MUX_MODE0) /* spi0_d1.spi0_d1 */ + >; + }; +}; + +/* Touch Screen */ +&tscadc { + status = "okay"; + tsc { + ti,wires = <4>; + ti,x-plate-resistance = <200>; + ti,coordinate-readouts = <5>; + ti,wire-config = <0x00 0x11 0x22 0x33>; + }; + + adc { + ti,adc-channels = <4 5 6 7>; + }; +}; + +/* UARTs */ +&uart0 { + /* Serial Console */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; +}; + +&uart1 { + /* Broken out to J6 header */ + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; +}; + +&am33xx_pinmux { + uart0_pins: pinmux_uart0 { + pinctrl-single,pins = < + 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */ + 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */ + >; + }; + uart1_pins: pinmux_uart1 { + pinctrl-single,pins = < + 0x178 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */ + 0x17C (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */ + 0x180 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_rxd.uart1_rxd */ + 0x184 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */ + >; + }; +}; + +/* USB */ +&usb { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&usb_pins>; +}; + +&usb_ctrl_mod { + status = "okay"; +}; + +&usb0_phy { + status = "okay"; +}; + +&usb1_phy { + status = "okay"; +}; + +&usb0 { + status = "okay"; + dr_mode = "host"; +}; + +&usb1 { + status = "okay"; + dr_mode = "host"; +}; + +&cppi41dma { + status = "okay"; +}; + +&am33xx_pinmux { + usb_pins: pinmux_usb { + pinctrl-single,pins = < + /* USB0 Over-Current (active low) */ + 0x64 (PIN_INPUT | MUX_MODE7) /* gpmc_a9.gpio1_25 */ + /* USB1 Over-Current (active low) */ + 0x68 (PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */ + >; + }; +}; + +/* User IO */ +&leds { + pinctrl-names = "default"; + pinctrl-0 = <&user_leds_pins>; + + led@0 { + label = "pepper:user0:blue"; + gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + }; + + led@1 { + label = "pepper:user1:red"; + gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "none"; + default-state = "off"; + }; +}; + +&buttons { + pinctrl-names = "default"; + pinctrl-0 = <&user_buttons_pins>; + #address-cells = <1>; + #size-cells = <0>; + + button@0 { + label = "home"; + linux,code = ; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + + button@1 { + label = "menu"; + linux,code = ; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; + + buttons@2 { + label = "power"; + linux,code = ; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + gpio-key,wakeup; + }; +}; + +&am33xx_pinmux { + user_leds_pins: pinmux_user_leds { + pinctrl-single,pins = < + 0x50 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a4.gpio1_20 */ + 0x54 (PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */ + >; + }; + + user_buttons_pins: pinmux_user_buttons { + pinctrl-single,pins = < + 0x58 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */ + 0x5C (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a7.gpio1_21 */ + 0x164 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio0_7 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 4a4e02d0ce9e408b16b3c1bb57222fad963a2766..3a0a161342bafb7299b08ca9a80391f0edb47382 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -347,6 +347,15 @@ dcan1: d_can@481d0000 { status = "disabled"; }; + mailbox: mailbox@480C8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480C8000 0x200>; + interrupts = <77>; + ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + }; + timer1: timer@44e31000 { compatible = "ti,am335x-timer-1ms"; reg = <0x44e31000 0x400>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index 49fa596222547d646c79a031b260097cf9a8bf8e..9b3d2ba82f13a1b6aaf725c0e529255310726052 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -30,7 +30,7 @@ aliases { cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu: cpu@0 { compatible = "arm,cortex-a9"; device_type = "cpu"; reg = <0>; @@ -168,9 +168,6 @@ mailbox: mailbox@480C8000 { ti,hwmods = "mailbox"; ti,mbox-num-users = <4>; ti,mbox-num-fifos = <8>; - ti,mbox-names = "wkup_m3"; - ti,mbox-data = <0 0 0 0>; - status = "disabled"; }; timer1: timer@44e31000 { @@ -270,7 +267,7 @@ counter32k: counter@44e86000 { ti,hwmods = "counter_32k"; }; - rtc@44e3e000 { + rtc: rtc@44e3e000 { compatible = "ti,am4372-rtc","ti,da830-rtc"; reg = <0x44e3e000 0x1000>; interrupts = ; interrupts = ; @@ -871,7 +868,7 @@ dss: dss@4832a000 { #size-cells = <1>; ranges; - dispc@4832a400 { + dispc: dispc@4832a400 { compatible = "ti,omap3-dispc"; reg = <0x4832a400 0x400>; interrupts = ; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 003766c47bbfe094d3b68d2d4169a2119ba4cf9b..646a6eade788f0114847bfa254f9bb7fcff272be 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -257,16 +257,73 @@ lcd_pins: lcd_pins { }; &i2c0 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins>; + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + tps65218: tps65218@24 { + reg = <0x24>; + compatible = "ti,tps65218"; + interrupts = ; /* NMIn */ + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + + dcdc1: regulator-dcdc1 { + compatible = "ti,tps65218-dcdc1"; + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2: regulator-dcdc2 { + compatible = "ti,tps65218-dcdc2"; + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3: regulator-dcdc3 { + compatible = "ti,tps65218-dcdc3"; + regulator-name = "vdcdc3"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + dcdc5: regulator-dcdc5 { + compatible = "ti,tps65218-dcdc5"; + regulator-name = "v1_0bat"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + dcdc6: regulator-dcdc6 { + compatible = "ti,tps65218-dcdc6"; + regulator-name = "v1_8bat"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo1: regulator-ldo1 { + compatible = "ti,tps65218-ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; }; &i2c1 { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&i2c1_pins>; - + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; pixcir_ts@5c { compatible = "pixcir,pixcir_tangoc"; pinctrl-names = "default"; @@ -277,8 +334,8 @@ pixcir_ts@5c { attb-gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; - x-size = <1024>; - y-size = <600>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; }; }; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts new file mode 100644 index 0000000000000000000000000000000000000000..859ff3d620ee6734bcd0e802cf53fd8b94069547 --- /dev/null +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -0,0 +1,613 @@ +/* + * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* AM437x SK EVM */ + +/dts-v1/; + +#include "am4372.dtsi" +#include +#include +#include +#include + +/ { + model = "TI AM437x SK EVM"; + compatible = "ti,am437x-sk-evm","ti,am4372","ti,am43"; + + aliases { + display0 = &lcd0; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&ecap0 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 51 53 56 62 75 101 152 255>; + default-brightness-level = <8>; + }; + + sound { + compatible = "ti,da830-evm-audio"; + ti,model = "AM437x-SK-EVM"; + ti,audio-codec = <&tlv320aic3106>; + ti,mcasp-controller = <&mcasp1>; + ti,codec-clock-rate = <24000000>; + ti,audio-routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT"; + }; + + matrix_keypad: matrix_keypad@0 { + compatible = "gpio-matrix-keypad"; + + pinctrl-names = "default"; + pinctrl-0 = <&matrix_keypad_pins>; + + debounce-delay-ms = <5>; + col-scan-delay-us = <1500>; + + row-gpios = <&gpio5 5 GPIO_ACTIVE_HIGH /* Bank5, pin5 */ + &gpio5 6 GPIO_ACTIVE_HIGH>; /* Bank5, pin6 */ + + col-gpios = <&gpio5 13 GPIO_ACTIVE_HIGH /* Bank5, pin13 */ + &gpio5 4 GPIO_ACTIVE_HIGH>; /* Bank5, pin4 */ + + linux,keymap = < + MATRIX_KEY(0, 0, KEY_DOWN) + MATRIX_KEY(0, 1, KEY_RIGHT) + MATRIX_KEY(1, 0, KEY_LEFT) + MATRIX_KEY(1, 1, KEY_UP) + >; + }; + + leds { + compatible = "gpio-leds"; + + pinctrl-names = "default"; + pinctrl-0 = <&leds_pins>; + + led@0 { + label = "am437x-sk:red:heartbeat"; + gpios = <&gpio5 0 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 0 */ + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + + led@1 { + label = "am437x-sk:green:mmc1"; + gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 1 */ + linux,default-trigger = "mmc0"; + default-state = "off"; + }; + + led@2 { + label = "am437x-sk:blue:cpu0"; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 2 */ + linux,default-trigger = "cpu0"; + default-state = "off"; + }; + + led@3 { + label = "am437x-sk:blue:usr3"; + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; /* Bank 5, pin 3 */ + default-state = "off"; + }; + }; + + lcd0: display { + compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; + label = "lcd"; + + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; + + panel-timing { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hfront-porch = <8>; + hback-porch = <43>; + hsync-len = <4>; + vback-porch = <12>; + vfront-porch = <4>; + vsync-len = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + port { + lcd_in: endpoint { + remote-endpoint = <&dpi_out>; + }; + }; + }; +}; + +&am43xx_pinmux { + matrix_keypad_pins: matrix_keypad_pins { + pinctrl-single,pins = < + 0x24c (PIN_OUTPUT | MUX_MODE7) /* gpio5_13.gpio5_13 */ + 0x250 (PIN_OUTPUT | MUX_MODE7) /* spi4_sclk.gpio5_4 */ + 0x254 (PIN_INPUT | MUX_MODE7) /* spi4_d0.gpio5_5 */ + 0x258 (PIN_INPUT | MUX_MODE7) /* spi4_d1.gpio5_5 */ + >; + }; + + leds_pins: leds_pins { + pinctrl-single,pins = < + 0x228 (PIN_OUTPUT | MUX_MODE7) /* uart3_rxd.gpio5_2 */ + 0x22c (PIN_OUTPUT | MUX_MODE7) /* uart3_txd.gpio5_3 */ + 0x230 (PIN_OUTPUT | MUX_MODE7) /* uart3_ctsn.gpio5_0 */ + 0x234 (PIN_OUTPUT | MUX_MODE7) /* uart3_rtsn.gpio5_1 */ + >; + }; + + i2c0_pins: i2c0_pins { + pinctrl-single,pins = < + 0x188 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_sda.i2c0_sda */ + 0x18c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* i2c0_scl.i2c0_scl */ + >; + }; + + i2c1_pins: i2c1_pins { + pinctrl-single,pins = < + 0x15c (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_cs0.i2c1_scl */ + 0x158 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE2) /* spi0_d1.i2c1_sda */ + >; + }; + + mmc1_pins: pinmux_mmc1_pins { + pinctrl-single,pins = < + 0x160 (PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */ + >; + }; + + ecap0_pins: backlight_pins { + pinctrl-single,pins = < + 0x164 (PIN_OUTPUT | MUX_MODE0) /* eCAP0_in_PWM0_out.eCAP0_in_PWM0_out */ + >; + }; + + edt_ft5306_ts_pins: edt_ft5306_ts_pins { + pinctrl-single,pins = < + 0x74 (PIN_INPUT | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ + 0x78 (PIN_OUTPUT | MUX_MODE7) /* gpmc_be1n.gpio1_28 */ + >; + }; + + cpsw_default: cpsw_default { + pinctrl-single,pins = < + /* Slave 1 */ + 0x12c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rmii1_tclk */ + 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */ + 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */ + 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */ + 0x120 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td2 */ + 0x11c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td3 */ + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rmii1_rclk */ + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */ + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */ + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */ + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd2 */ + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd3 */ + + /* Slave 2 */ + 0x58 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a6.rgmii2_tclk */ + 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a0.rgmii2_tctl */ + 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a5.rgmii2_td0 */ + 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a4.rgmii2_td1 */ + 0x4c (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a3.rgmii2_td2 */ + 0x48 (PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* gpmc_a2.rgmii2_td3 */ + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a7.rgmii2_rclk */ + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a1.rgmii2_rtcl */ + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a11.rgmii2_rd0 */ + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a10.rgmii2_rd1 */ + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a9.rgmii2_rd2 */ + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE2) /* gpmc_a8.rgmii2_rd3 */ + >; + }; + + cpsw_sleep: cpsw_sleep { + pinctrl-single,pins = < + /* Slave 1 reset value */ + 0x12c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x120 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x11c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x130 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x118 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x138 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x134 (PIN_INPUT_PULLDOWN | MUX_MODE7) + + /* Slave 2 reset value */ + 0x58 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x4c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x48 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x5c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x44 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x60 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + davinci_mdio_default: davinci_mdio_default { + pinctrl-single,pins = < + /* MDIO */ + 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */ + 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */ + >; + }; + + davinci_mdio_sleep: davinci_mdio_sleep { + pinctrl-single,pins = < + /* MDIO reset value */ + 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + + dss_pins: dss_pins { + pinctrl-single,pins = < + 0x020 (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 8 -> DSS DATA 23 */ + 0x024 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x028 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x02c (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x030 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x034 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x038 (PIN_OUTPUT_PULLUP | MUX_MODE1) + 0x03c (PIN_OUTPUT_PULLUP | MUX_MODE1) /* gpmc ad 15 -> DSS DATA 16 */ + 0x0a0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 0 */ + 0x0a4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0a8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0ac (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0b8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0bc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0c8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0cc (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d0 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d4 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0d8 (PIN_OUTPUT_PULLUP | MUX_MODE0) + 0x0dc (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS DATA 15 */ + 0x0e0 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS VSYNC */ + 0x0e4 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS HSYNC */ + 0x0e8 (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS PCLK */ + 0x0ec (PIN_OUTPUT_PULLUP | MUX_MODE0) /* DSS AC BIAS EN */ + + >; + }; + + qspi_pins: qspi_pins { + pinctrl-single,pins = < + 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE3) /* gpmc_csn0.qspi_csn */ + 0x88 (PIN_OUTPUT | MUX_MODE2) /* gpmc_csn3.qspi_clk */ + 0x90 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_advn_ale.qspi_d0 */ + 0x94 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_oen_ren.qspi_d1 */ + 0x98 (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_wen.qspi_d2 */ + 0x9c (PIN_INPUT_PULLUP | MUX_MODE3) /* gpmc_be0n_cle.qspi_d3 */ + >; + }; + + mcasp1_pins: mcasp1_pins { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + >; + }; + + lcd_pins: lcd_pins { + pinctrl-single,pins = < + /* GPIO 5_8 to select LCD / HDMI */ + 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) + >; + }; +}; + +&i2c0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + tps@24 { + compatible = "ti,tps65218"; + reg = <0x24>; + interrupt-parent = <&gic>; + interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; + + dcdc1: regulator-dcdc1 { + compatible = "ti,tps65218-dcdc1"; + /* VDD_CORE limits min of OPP50 and max of OPP100 */ + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2: regulator-dcdc2 { + compatible = "ti,tps65218-dcdc2"; + /* VDD_MPU limits min of OPP50 and max of OPP_NITRO */ + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3: regulator-dcdc3 { + compatible = "ti,tps65218-dcdc3"; + regulator-name = "vdds_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc4: regulator-dcdc4 { + compatible = "ti,tps65218-dcdc4"; + regulator-name = "v3_3d"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: regulator-ldo1 { + compatible = "ti,tps65218-ldo1"; + regulator-name = "v1_8d"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + }; + + at24@50 { + compatible = "at24,24c256"; + pagesize = <64>; + reg = <0x50>; + }; +}; + +&i2c1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + clock-frequency = <400000>; + + edt-ft5306@38 { + status = "okay"; + compatible = "edt,edt-ft5306", "edt,edt-ft5x06"; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5306_ts_pins>; + + reg = <0x38>; + interrupt-parent = <&gpio0>; + interrupts = <31 0>; + + wake-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + + touchscreen-size-x = <480>; + touchscreen-size-y = <272>; + }; + + tlv320aic3106: tlv320aic3106@1b { + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + status = "okay"; + + /* Regulators */ + AVDD-supply = <&dcdc4>; + IOVDD-supply = <&dcdc4>; + DRVDD-supply = <&dcdc4>; + DVDD-supply = <&ldo1>; + }; + + lis331dlh@18 { + compatible = "st,lis331dlh"; + reg = <0x18>; + status = "okay"; + + Vdd-supply = <&dcdc4>; + Vdd_IO-supply = <&dcdc4>; + interrupts-extended = <&gpio1 6 0>, <&gpio2 1 0>; + }; +}; + +&epwmss0 { + status = "okay"; +}; + +&ecap0 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&ecap0_pins>; +}; + +&gpio0 { + status = "okay"; +}; + +&gpio1 { + status = "okay"; +}; + +&gpio5 { + status = "okay"; +}; + +&mmc1 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + + vmmc-supply = <&dcdc4>; + bus-width = <4>; + cd-gpios = <&gpio0 6 GPIO_ACTIVE_HIGH>; +}; + +&usb2_phy1 { + status = "okay"; +}; + +&usb1 { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb2_phy2 { + status = "okay"; +}; + +&usb2 { + dr_mode = "host"; + status = "okay"; +}; + +&qspi { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&qspi_pins>; + + spi-max-frequency = <48000000>; + m25p80@0 { + compatible = "mx66l51235l"; + spi-max-frequency = <48000000>; + reg = <0>; + spi-cpol; + spi-cpha; + spi-tx-bus-width = <1>; + spi-rx-bus-width = <4>; + #address-cells = <1>; + #size-cells = <1>; + + /* MTD partition table. + * The ROM checks the first 512KiB + * for a valid file to boot(XIP). + */ + partition@0 { + label = "QSPI.U_BOOT"; + reg = <0x00000000 0x000080000>; + }; + partition@1 { + label = "QSPI.U_BOOT.backup"; + reg = <0x00080000 0x00080000>; + }; + partition@2 { + label = "QSPI.U-BOOT-SPL_OS"; + reg = <0x00100000 0x00010000>; + }; + partition@3 { + label = "QSPI.U_BOOT_ENV"; + reg = <0x00110000 0x00010000>; + }; + partition@4 { + label = "QSPI.U-BOOT-ENV.backup"; + reg = <0x00120000 0x00010000>; + }; + partition@5 { + label = "QSPI.KERNEL"; + reg = <0x00130000 0x0800000>; + }; + partition@6 { + label = "QSPI.FILESYSTEM"; + reg = <0x00930000 0x36D0000>; + }; + }; +}; + +&mac { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&cpsw_default>; + pinctrl-1 = <&cpsw_sleep>; + dual_emac = <1>; + status = "okay"; +}; + +&davinci_mdio { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&davinci_mdio_default>; + pinctrl-1 = <&davinci_mdio_sleep>; + status = "okay"; +}; + +&cpsw_emac0 { + phy_id = <&davinci_mdio>, <4>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <1>; +}; + +&cpsw_emac1 { + phy_id = <&davinci_mdio>, <5>; + phy-mode = "rgmii"; + dual_emac_res_vlan = <2>; +}; + +&elm { + status = "okay"; +}; + +&mcasp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcasp1_pins>; + + status = "okay"; + + op-mode = <0>; + tdm-slots = <2>; + serial-dir = < + 0 0 1 2 + >; + + tx-num-evt = <1>; + rx-num-evt = <1>; +}; + +&dss { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&dss_pins>; + + port { + dpi_out: endpoint@0 { + remote-endpoint = <&lcd_in>; + data-lines = <24>; + }; + }; +}; + +&rtc { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 90098f98a5c8fd7c0d94cf92c1e81b3930809e9c..ed7dd23959155598aba377c27d727e8dc481c551 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -327,6 +327,65 @@ &i2c0 { status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins>; + clock-frequency = <400000>; + + tps65218: tps65218@24 { + reg = <0x24>; + compatible = "ti,tps65218"; + interrupts = ; /* NMIn */ + interrupt-parent = <&gic>; + interrupt-controller; + #interrupt-cells = <2>; + + dcdc1: regulator-dcdc1 { + compatible = "ti,tps65218-dcdc1"; + regulator-name = "vdd_core"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1144000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc2: regulator-dcdc2 { + compatible = "ti,tps65218-dcdc2"; + regulator-name = "vdd_mpu"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <1378000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc3: regulator-dcdc3 { + compatible = "ti,tps65218-dcdc3"; + regulator-name = "vdcdc3"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-boot-on; + regulator-always-on; + }; + + dcdc5: regulator-dcdc5 { + compatible = "ti,tps65218-dcdc5"; + regulator-name = "v1_0bat"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + }; + + dcdc6: regulator-dcdc6 { + compatible = "ti,tps65218-dcdc6"; + regulator-name = "v1_8bat"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo1: regulator-ldo1 { + compatible = "ti,tps65218-ldo1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; at24@50 { compatible = "at24,24c256"; @@ -344,8 +403,8 @@ pixcir_ts@5c { attb-gpio = <&gpio1 17 GPIO_ACTIVE_HIGH>; - x-size = <1024>; - y-size = <600>; + touchscreen-size-x = <1024>; + touchscreen-size-y = <600>; }; }; diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 3c4f6d983cbd4c32175373ad8a3d0740098f8149..4e0ad3b827962831fe7d3e0d5a325d33b420381f 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -40,6 +40,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/armada-375-db.dts b/arch/arm/boot/dts/armada-375-db.dts index 1e2919d43d78b2ce81405a46eb7e6e0a8c22280d..929ae00b406361b28a9d32b139d96a5e36ceb435 100644 --- a/arch/arm/boot/dts/armada-375-db.dts +++ b/arch/arm/boot/dts/armada-375-db.dts @@ -123,6 +123,32 @@ mvsdio@d4000 { cd-gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; wp-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; + + mdio { + phy0: ethernet-phy@0 { + reg = <0>; + }; + + phy3: ethernet-phy@3 { + reg = <3>; + }; + }; + + ethernet@f0000 { + status = "okay"; + + eth0@c4000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + eth1@c5000 { + status = "okay"; + phy = <&phy3>; + phy-mode = "gmii"; + }; + }; }; pcie-controller { diff --git a/arch/arm/boot/dts/armada-375.dtsi b/arch/arm/boot/dts/armada-375.dtsi index fb92551a1e71586e4fc9aadf834c21e9b85e6679..c1e49e7bf0fa6505515cc0e5bf571263943285d3 100644 --- a/arch/arm/boot/dts/armada-375.dtsi +++ b/arch/arm/boot/dts/armada-375.dtsi @@ -25,6 +25,8 @@ aliases { gpio0 = &gpio0; gpio1 = &gpio1; gpio2 = &gpio2; + ethernet0 = ð0; + ethernet1 = ð1; }; clocks { @@ -151,6 +153,38 @@ gic: interrupt-controller@d000 { <0xc100 0x100>; }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0xc0054 0x4>; + clocks = <&gateclk 19>; + }; + + /* Network controller */ + ethernet@f0000 { + compatible = "marvell,armada-375-pp2"; + reg = <0xf0000 0xa000>, /* Packet Processor regs */ + <0xc0000 0x3060>, /* LMS regs */ + <0xc4000 0x100>, /* eth0 regs */ + <0xc5000 0x100>; /* eth1 regs */ + clocks = <&gateclk 3>, <&gateclk 19>; + clock-names = "pp_clk", "gop_clk"; + status = "disabled"; + + eth0: eth0@c4000 { + interrupts = ; + port-id = <0>; + status = "disabled"; + }; + + eth1: eth1@c5000 { + interrupts = ; + port-id = <1>; + status = "disabled"; + }; + }; + spi0: spi@10600 { compatible = "marvell,orion-spi"; reg = <0x10600 0x50>; diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi index 689fa1a467289578ccb0344b7c7550be1e48d709..242d0ecc99f33e178fdef408820b8623880fb3bf 100644 --- a/arch/arm/boot/dts/armada-38x.dtsi +++ b/arch/arm/boot/dts/armada-38x.dtsi @@ -286,6 +286,11 @@ cpurst@20800 { reg = <0x20800 0x10>; }; + mpcore-soc-ctrl@20d20 { + compatible = "marvell,armada-380-mpcore-soc-ctrl"; + reg = <0x20d20 0x6c>; + }; + coherency-fabric@21010 { compatible = "marvell,armada-380-coherency-fabric"; reg = <0x21010 0x1c>; diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts new file mode 100644 index 0000000000000000000000000000000000000000..469cf7137595fe80bd12086be4eb9eada5b2bdb4 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts @@ -0,0 +1,284 @@ +/* + * Device Tree file for Lenovo Iomega ix4-300d + * + * Copyright (C) 2014, Benoit Masson + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/dts-v1/; + +#include +#include +#include "armada-xp-mv78230.dtsi" + +/ { + model = "Lenovo Iomega ix4-300d"; + compatible = "lenovo,ix4-300d", "marvell,armadaxp-mv78230", + "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + stdout-path = "/soc/internal-regs/serial@12000"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x20000000>; /* 512MB */ + }; + + soc { + ranges = ; + + pcie-controller { + status = "okay"; + + /* Quad port sata: Marvell 88SX7042 */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* USB 3.0 xHCI controller: NEC D720200F1 */ + pcie@5,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + + internal-regs { + pinctrl { + poweroff_pin: poweroff-pin { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + power_button_pin: power-button-pin { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + reset_button_pin: reset-button-pin { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + select_button_pin: select-button-pin { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + scroll_button_pin: scroll-button-pin { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + hdd_led_pin: hdd-led-pin { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + usb@50000 { + status = "okay"; + }; + + usb@51000 { + status = "okay"; + }; + + i2c@11000 { + clock-frequency = <400000>; + status = "okay"; + + adt7473@2e { + compatible = "adi,adt7473"; + reg = <0x2e>; + }; + + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + + }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0xe0000>; + read-only; + }; + + partition@e0000 { + label = "u-boot-env"; + reg = <0xe0000 0x20000>; + read-only; + }; + + partition@100000 { + label = "u-boot-env2"; + reg = <0x100000 0x20000>; + read-only; + }; + + partition@120000 { + label = "zImage"; + reg = <0x120000 0x400000>; + }; + + partition@520000 { + label = "initrd"; + reg = <0x520000 0x400000>; + }; + + partition@xE00000 { + label = "boot"; + reg = <0xE00000 0x3F200000>; + }; + + partition@flash { + label = "flash"; + reg = <0x0 0x40000000>; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&power_button_pin &reset_button_pin + &select_button_pin &scroll_button_pin>; + pinctrl-names = "default"; + + power-button { + label = "Power Button"; + linux,code = ; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + }; + + reset-button { + label = "Reset Button"; + linux,code = ; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + + select-button { + label = "Select Button"; + linux,code = ; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + + scroll-button { + label = "Scroll Button"; + linux,code = ; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; + }; + + spi3 { + compatible = "spi-gpio"; + status = "okay"; + gpio-sck = <&gpio0 25 GPIO_ACTIVE_LOW>; + gpio-mosi = <&gpio1 15 GPIO_ACTIVE_LOW>; /*gpio 47*/ + cs-gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; + num-chipselects = <1>; + #address-cells = <1>; + #size-cells = <0>; + + gpio_spi: gpio_spi@0 { + compatible = "fairchild,74hc595"; + gpio-controller; + #gpio-cells = <2>; + reg = <0>; + registers-number = <2>; + spi-max-frequency = <100000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&hdd_led_pin>; + pinctrl-names = "default"; + + hdd-led { + label = "ix4-300d:hdd:blue"; + gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + power-led { + label = "ix4-300d:power:white"; + gpios = <&gpio_spi 1 GPIO_ACTIVE_LOW>; + /* init blinking while booting */ + linux,default-trigger = "timer"; + default-state = "on"; + }; + + sysfail-led { + label = "ix4-300d:sysfail:red"; + gpios = <&gpio_spi 2 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + sys-led { + label = "ix4-300d:sys:blue"; + gpios = <&gpio_spi 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + hddfail-led { + label = "ix4-300d:hddfail:red"; + gpios = <&gpio_spi 4 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + }; + + /* + * Warning: you need both eth1 & 0 PHY initialized (i.e having + * them up does the tweak) for poweroff to shutdown otherwise it + * reboots + */ + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff_pin>; + pinctrl-names = "default"; + gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi index 1257ff1ed278e68a33793eb9cf0c40be08e0b169..2592e1c13560039c0a1396b63026934b12bb305c 100644 --- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -34,6 +34,7 @@ cpu@0 { compatible = "marvell,sheeva-v7"; reg = <0>; clocks = <&cpuclk 0>; + clock-latency = <1000000>; }; cpu@1 { @@ -41,6 +42,7 @@ cpu@1 { compatible = "marvell,sheeva-v7"; reg = <1>; clocks = <&cpuclk 1>; + clock-latency = <1000000>; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi index 3396b25b39e179cb1a444435adfa28c87385e8ed..480e237a870fa42c86dca6ab7dd5585d6345956a 100644 --- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -36,6 +36,7 @@ cpu@0 { compatible = "marvell,sheeva-v7"; reg = <0>; clocks = <&cpuclk 0>; + clock-latency = <1000000>; }; cpu@1 { @@ -43,6 +44,7 @@ cpu@1 { compatible = "marvell,sheeva-v7"; reg = <1>; clocks = <&cpuclk 1>; + clock-latency = <1000000>; }; }; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi index 6da84bf40aaf48849d308453755c1eca3605396b..2c7b1fef470350714a9f9c5df7b25f42708019de 100644 --- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -37,6 +37,7 @@ cpu@0 { compatible = "marvell,sheeva-v7"; reg = <0>; clocks = <&cpuclk 0>; + clock-latency = <1000000>; }; cpu@1 { @@ -44,6 +45,7 @@ cpu@1 { compatible = "marvell,sheeva-v7"; reg = <1>; clocks = <&cpuclk 1>; + clock-latency = <1000000>; }; cpu@2 { @@ -51,6 +53,7 @@ cpu@2 { compatible = "marvell,sheeva-v7"; reg = <2>; clocks = <&cpuclk 2>; + clock-latency = <1000000>; }; cpu@3 { @@ -58,6 +61,7 @@ cpu@3 { compatible = "marvell,sheeva-v7"; reg = <3>; clocks = <&cpuclk 3>; + clock-latency = <1000000>; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 5902e8359c9165c33cc265b0a304df33acb640b5..bff9f6c18db1358dd7d70aa9b9de0e40c054da20 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -99,7 +99,7 @@ thermal@182b0 { cpuclk: clock-complex@18700 { #clock-cells = <1>; compatible = "marvell,armada-xp-cpu-clock"; - reg = <0x18700 0xA0>; + reg = <0x18700 0xA0>, <0x1c054 0x10>; clocks = <&coreclk 1>; }; diff --git a/arch/arm/boot/dts/at91-ariag25.dts b/arch/arm/boot/dts/at91-ariag25.dts index 55ab6180e350d10e9c4f816095eba4910a37cbce..e9ced30159a728d608c75b4a5098a6b08e7bb12c 100644 --- a/arch/arm/boot/dts/at91-ariag25.dts +++ b/arch/arm/boot/dts/at91-ariag25.dts @@ -42,6 +42,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi index df4b7869569587991abcf5bde8be1e495f632213..b6ea3f4a7206025f144f3bb8f6e69328f4996779 100644 --- a/arch/arm/boot/dts/at91-cosino.dtsi +++ b/arch/arm/boot/dts/at91-cosino.dtsi @@ -34,6 +34,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/at91-foxg20.dts b/arch/arm/boot/dts/at91-foxg20.dts index cbe9673439970a3f883fb58cce44a0cb46551ab6..f89598af4c2b1ef24b1812b15fca28de2c5b4382 100644 --- a/arch/arm/boot/dts/at91-foxg20.dts +++ b/arch/arm/boot/dts/at91-foxg20.dts @@ -31,6 +31,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/at91-qil_a9260.dts b/arch/arm/boot/dts/at91-qil_a9260.dts index 5576ae8786c058b891e6fca015cce18d2efea6b9..a9aef53ab764202df553a058b73cd77a84c55dff 100644 --- a/arch/arm/boot/dts/at91-qil_a9260.dts +++ b/arch/arm/boot/dts/at91-qil_a9260.dts @@ -28,6 +28,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/at91-sama5d3_xplained.dts b/arch/arm/boot/dts/at91-sama5d3_xplained.dts index 5b8e40400becbd57fb2ca3e03d3b411dfb7e6dd7..fec1fca2ad66c80ad3ce949d82741b235790c1ed 100644 --- a/arch/arm/boot/dts/at91-sama5d3_xplained.dts +++ b/arch/arm/boot/dts/at91-sama5d3_xplained.dts @@ -21,12 +21,14 @@ memory { reg = <0x20000000 0x10000000>; }; - slow_xtal { - clock-frequency = <32768>; - }; + clocks { + slow_xtal { + clock-frequency = <32768>; + }; - main_xtal { - clock-frequency = <12000000>; + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index c61b16fba79babaa5c6e2a4dd4fb51b09e27d379..65ccf564b9a5636eabb7af6cf2697d5c28dccd74 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -14,6 +14,7 @@ #include #include #include +#include / { model = "Atmel AT91RM9200 family SoC"; @@ -51,6 +52,20 @@ memory { reg = <0x20000000 0x04000000>; }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -79,6 +94,260 @@ ramc0: ramc@ffffff00 { pmc: pmc@fffffc00 { compatible = "atmel,at91rm9200-pmc"; reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + clocks = <&main_osc>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <1000000 32000000>; + #atmel,pll-clk-output-range-cells = <3>; + atmel,pll-clk-output-ranges = <80000000 160000000 0>, + <150000000 180000000 2>; + }; + + pllb: pllbck { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKB>; + clocks = <&main>; + reg = <1>; + atmel,clk-input-range = <1000000 32000000>; + #atmel,pll-clk-output-range-cells = <3>; + atmel,pll-clk-output-ranges = <80000000 160000000 0>, + <150000000 180000000 2>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; + atmel,clk-output-range = <0 80000000>; + atmel,clk-divisors = <1 2 3 4>; + }; + + usb: usbck { + compatible = "atmel,at91rm9200-clk-usb"; + #clock-cells = <0>; + atmel,clk-divisors = <1 2>; + clocks = <&pllb>; + }; + + prog: progck { + compatible = "atmel,at91rm9200-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = ; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = ; + }; + + prog2: prog2 { + #clock-cells = <0>; + reg = <2>; + interrupts = ; + }; + + prog3: prog3 { + #clock-cells = <0>; + reg = <3>; + interrupts = ; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + udpck: udpck { + #clock-cells = <0>; + reg = <2>; + clocks = <&usb>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <4>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + pck2: pck2 { + #clock-cells = <0>; + reg = <10>; + clocks = <&prog2>; + }; + + pck3: pck3 { + #clock-cells = <0>; + reg = <11>; + clocks = <&prog3>; + }; + }; + + periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <3>; + }; + + pioC_clk: pioC_clk { + #clock-cells = <0>; + reg = <4>; + }; + + pioD_clk: pioD_clk { + #clock-cells = <0>; + reg = <5>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <8>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <9>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <10>; + }; + + udc_clk: udc_clk { + #clock-cells = <0>; + reg = <11>; + }; + + twi0_clk: twi0_clk { + reg = <12>; + #clock-cells = <0>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <13>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <14>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <15>; + }; + + ssc2_clk: ssc2_clk { + #clock-cells = <0>; + reg = <16>; + }; + + tc0_clk: tc0_clk { + #clock-cells = <0>; + reg = <17>; + }; + + tc1_clk: tc1_clk { + #clock-cells = <0>; + reg = <18>; + }; + + tc2_clk: tc2_clk { + #clock-cells = <0>; + reg = <19>; + }; + + tc3_clk: tc3_clk { + #clock-cells = <0>; + reg = <20>; + }; + + tc4_clk: tc4_clk { + #clock-cells = <0>; + reg = <21>; + }; + + tc5_clk: tc5_clk { + #clock-cells = <0>; + reg = <22>; + }; + + ohci_clk: ohci_clk { + #clock-cells = <0>; + reg = <23>; + }; + + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <24>; + }; + }; }; st: timer@fffffd00 { @@ -93,6 +362,8 @@ tcb0: timer@fffa0000 { interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; }; tcb1: timer@fffa4000 { @@ -101,6 +372,8 @@ tcb1: timer@fffa4000 { interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0 21 IRQ_TYPE_LEVEL_HIGH 0 22 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; }; i2c0: i2c@fffb8000 { @@ -109,6 +382,7 @@ i2c0: i2c@fffb8000 { interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_twi>; + clocks = <&twi0_clk>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -118,6 +392,8 @@ mmc0: mmc@fffb4000 { compatible = "atmel,hsmci"; reg = <0xfffb4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; @@ -130,6 +406,8 @@ ssc0: ssc@fffd0000 { interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disable"; }; @@ -139,6 +417,8 @@ ssc1: ssc@fffd4000 { interrupts = <15 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&ssc1_clk>; + clock-names = "pclk"; status = "disable"; }; @@ -148,6 +428,8 @@ ssc2: ssc@fffd8000 { interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc2_tx &pinctrl_ssc2_rx>; + clocks = <&ssc2_clk>; + clock-names = "pclk"; status = "disable"; }; @@ -158,6 +440,8 @@ macb0: ethernet@fffbc000 { phy-mode = "rmii"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; + clocks = <&macb0_clk>; + clock-names = "ether_clk"; status = "disabled"; }; @@ -496,6 +780,7 @@ pioA: gpio@fffff400 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioA_clk>; }; pioB: gpio@fffff600 { @@ -506,6 +791,7 @@ pioB: gpio@fffff600 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioB_clk>; }; pioC: gpio@fffff800 { @@ -516,6 +802,7 @@ pioC: gpio@fffff800 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioC_clk>; }; pioD: gpio@fffffa00 { @@ -526,6 +813,7 @@ pioD: gpio@fffffa00 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioD_clk>; }; }; @@ -535,6 +823,8 @@ dbgu: serial@fffff200 { interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -546,6 +836,8 @@ usart0: serial@fffc0000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -557,6 +849,8 @@ usart1: serial@fffc4000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -568,6 +862,8 @@ usart2: serial@fffc8000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -579,6 +875,8 @@ usart3: serial@fffcc000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -586,6 +884,8 @@ usb1: gadget@fffb0000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffb0000 0x4000>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udc_clk>, <&udpck>; + clock-names = "pclk", "hclk"; status = "disabled"; }; @@ -597,6 +897,8 @@ spi0: spi@fffe0000 { interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; }; @@ -622,6 +924,8 @@ usb0: ohci@00300000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00300000 0x100000>; interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index df6b0aa0e4ddd6388110a655c14b1ad889eb6bf0..43eb779dd6f6f5c077ade770b838fadda2171c38 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -25,6 +25,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index c0e0eae16a279f65dfc979d5d10735ca5b097c38..cb100b03a362fc8e3667dfa4b3f0de8418296ba1 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -12,6 +12,7 @@ #include #include #include +#include / { model = "Atmel AT91SAM9260 family SoC"; @@ -48,6 +49,26 @@ memory { reg = <0x20000000 0x04000000>; }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <5000000>; + }; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -74,8 +95,260 @@ ramc0: ramc@ffffea00 { }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91sam9260-pmc"; reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + clocks = <&main_osc>; + }; + + slow_rc_osc: slow_rc_osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-accuracy = <50000000>; + }; + + clk32k: slck { + compatible = "atmel,at91sam9260-clk-slow"; + #clock-cells = <0>; + clocks = <&slow_rc_osc>, <&slow_xtal>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <1000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <80000000 160000000 0 1>, + <150000000 240000000 2 1>; + }; + + pllb: pllbck { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKB>; + clocks = <&main>; + reg = <1>; + atmel,clk-input-range = <1000000 5000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + atmel,clk-output-range = <0 105000000>; + atmel,clk-divisors = <1 2 4 0>; + }; + + usb: usbck { + compatible = "atmel,at91rm9200-clk-usb"; + #clock-cells = <0>; + atmel,clk-divisors = <1 2 4 0>; + clocks = <&pllb>; + }; + + prog: progck { + compatible = "atmel,at91rm9200-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&clk32k>, <&main>, <&plla>, <&pllb>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = ; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = ; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + }; + + periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <3>; + }; + + pioC_clk: pioC_clk { + #clock-cells = <0>; + reg = <4>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <5>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <8>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <9>; + }; + + udc_clk: udc_clk { + #clock-cells = <0>; + reg = <10>; + }; + + twi0_clk: twi0_clk { + reg = <11>; + #clock-cells = <0>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <12>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <13>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <14>; + }; + + tc0_clk: tc0_clk { + #clock-cells = <0>; + reg = <17>; + }; + + tc1_clk: tc1_clk { + #clock-cells = <0>; + reg = <18>; + }; + + tc2_clk: tc2_clk { + #clock-cells = <0>; + reg = <19>; + }; + + ohci_clk: ohci_clk { + #clock-cells = <0>; + reg = <20>; + }; + + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <21>; + }; + + isi_clk: isi_clk { + #clock-cells = <0>; + reg = <22>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <23>; + }; + + uart0_clk: uart0_clk { + #clock-cells = <0>; + reg = <24>; + }; + + uart1_clk: uart1_clk { + #clock-cells = <0>; + reg = <25>; + }; + + tc3_clk: tc3_clk { + #clock-cells = <0>; + reg = <26>; + }; + + tc4_clk: tc4_clk { + #clock-cells = <0>; + reg = <27>; + }; + + tc5_clk: tc5_clk { + #clock-cells = <0>; + reg = <28>; + }; + }; }; rstc@fffffd00 { @@ -92,6 +365,7 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; }; tcb0: timer@fffa0000 { @@ -100,6 +374,8 @@ tcb0: timer@fffa0000 { interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0 18 IRQ_TYPE_LEVEL_HIGH 0 19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tc0_clk>, <&tc1_clk>, <&tc2_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; }; tcb1: timer@fffdc000 { @@ -108,6 +384,8 @@ tcb1: timer@fffdc000 { interrupts = <26 IRQ_TYPE_LEVEL_HIGH 0 27 IRQ_TYPE_LEVEL_HIGH 0 28 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tc3_clk>, <&tc4_clk>, <&tc5_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; }; pinctrl@fffff400 { @@ -443,6 +721,7 @@ pioA: gpio@fffff400 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioA_clk>; }; pioB: gpio@fffff600 { @@ -453,6 +732,7 @@ pioB: gpio@fffff600 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioB_clk>; }; pioC: gpio@fffff800 { @@ -463,6 +743,7 @@ pioC: gpio@fffff800 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioC_clk>; }; }; @@ -472,6 +753,8 @@ dbgu: serial@fffff200 { interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -483,6 +766,8 @@ usart0: serial@fffb0000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -494,6 +779,8 @@ usart1: serial@fffb4000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -505,6 +792,8 @@ usart2: serial@fffb8000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -516,6 +805,8 @@ usart3: serial@fffd0000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -527,6 +818,8 @@ uart0: serial@fffd4000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart0>; + clocks = <&uart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -538,6 +831,8 @@ uart1: serial@fffd8000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart1>; + clocks = <&uart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -547,6 +842,8 @@ macb0: ethernet@fffc4000 { interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -554,6 +851,8 @@ usb1: gadget@fffa4000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfffa4000 0x4000>; interrupts = <10 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udc_clk>, <&udpck>; + clock-names = "pclk", "hclk"; status = "disabled"; }; @@ -563,6 +862,7 @@ i2c0: i2c@fffac000 { interrupts = <11 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi0_clk>; status = "disabled"; }; @@ -573,6 +873,8 @@ mmc0: mmc@fffa8000 { #address-cells = <1>; #size-cells = <0>; pinctrl-names = "default"; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -582,6 +884,8 @@ ssc0: ssc@fffbc000 { interrupts = <14 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -593,6 +897,8 @@ spi0: spi@fffc8000 { interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -604,6 +910,8 @@ spi1: spi@fffcc000 { interrupts = <13 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -613,6 +921,8 @@ adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; interrupts = <5 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; atmel,adc-use-external-triggers; atmel,adc-channels-used = <0xf>; atmel,adc-vref = <3300>; @@ -680,6 +990,8 @@ usb0: ohci@00500000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00500000 0x100000>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9261.dtsi b/arch/arm/boot/dts/at91sam9261.dtsi index 04927db1d6bf1f8ba8053b9365bdb6404297c101..a81aab4281a7f57afab0e8858b98bcd1abf766ac 100644 --- a/arch/arm/boot/dts/at91sam9261.dtsi +++ b/arch/arm/boot/dts/at91sam9261.dtsi @@ -46,16 +46,18 @@ memory { reg = <0x20000000 0x08000000>; }; - main_xtal: main_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + clocks { + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - slow_xtal: slow_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9261ek.dts b/arch/arm/boot/dts/at91sam9261ek.dts index aa35a7aec9a87017446f6653b01178267209250a..f4a765729c7aad3e36a82feb7229fa77e2461781 100644 --- a/arch/arm/boot/dts/at91sam9261ek.dts +++ b/arch/arm/boot/dts/at91sam9261ek.dts @@ -20,14 +20,6 @@ memory { reg = <0x20000000 0x4000000>; }; - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <18432000>; - }; - clocks { #address-cells = <1>; #size-cells = <1>; @@ -37,6 +29,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index fece8665fb63ad89232a821c4da307475bbc4f88..bb23c2d33cf8edacd928da1e2650027886d60d6e 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -10,6 +10,7 @@ #include #include #include +#include / { model = "Atmel AT91SAM9263 family SoC"; @@ -32,6 +33,7 @@ aliases { ssc1 = &ssc1; pwm0 = &pwm0; }; + cpus { #address-cells = <0>; #size-cells = <0>; @@ -46,6 +48,20 @@ memory { reg = <0x20000000 0x08000000>; }; + clocks { + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -69,6 +85,264 @@ aic: interrupt-controller@fffff000 { pmc: pmc@fffffc00 { compatible = "atmel,at91rm9200-pmc"; reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + clocks = <&main_osc>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <1000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <80000000 200000000 0 1>, + <190000000 240000000 2 1>; + }; + + pllb: pllbck { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKB>; + clocks = <&main>; + reg = <1>; + atmel,clk-input-range = <1000000 5000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <70000000 130000000 1 1>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; + atmel,clk-output-range = <0 120000000>; + atmel,clk-divisors = <1 2 4 0>; + }; + + usb: usbck { + compatible = "atmel,at91rm9200-clk-usb"; + #clock-cells = <0>; + atmel,clk-divisors = <1 2 4 0>; + clocks = <&pllb>; + }; + + prog: progck { + compatible = "atmel,at91rm9200-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&slow_xtal>, <&main>, <&plla>, <&pllb>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = ; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = ; + }; + + prog2: prog2 { + #clock-cells = <0>; + reg = <2>; + interrupts = ; + }; + + prog3: prog3 { + #clock-cells = <0>; + reg = <3>; + interrupts = ; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + udpck: udpck { + #clock-cells = <0>; + reg = <7>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + + pck2: pck2 { + #clock-cells = <0>; + reg = <10>; + clocks = <&prog2>; + }; + + pck3: pck3 { + #clock-cells = <0>; + reg = <11>; + clocks = <&prog3>; + }; + }; + + periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <3>; + }; + + pioCDE_clk: pioCDE_clk { + #clock-cells = <0>; + reg = <4>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <8>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <9>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <10>; + }; + + mci1_clk: mci1_clk { + #clock-cells = <0>; + reg = <11>; + }; + + can_clk: can_clk { + #clock-cells = <0>; + reg = <12>; + }; + + twi0_clk: twi0_clk { + #clock-cells = <0>; + reg = <13>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <14>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <15>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <16>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <17>; + }; + + ac91_clk: ac97_clk { + #clock-cells = <0>; + reg = <18>; + }; + + tcb_clk: tcb_clk { + #clock-cells = <0>; + reg = <19>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <20>; + }; + + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <21>; + }; + + g2de_clk: g2de_clk { + #clock-cells = <0>; + reg = <23>; + }; + + udc_clk: udc_clk { + #clock-cells = <0>; + reg = <24>; + }; + + isi_clk: isi_clk { + #clock-cells = <0>; + reg = <25>; + }; + + lcd_clk: lcd_clk { + #clock-cells = <0>; + reg = <26>; + }; + + dma_clk: dma_clk { + #clock-cells = <0>; + reg = <27>; + }; + + ohci_clk: ohci_clk { + #clock-cells = <0>; + reg = <29>; + }; + }; }; ramc: ramc@ffffe200 { @@ -81,12 +355,15 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; }; tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb_clk>; + clock-names = "t0_clk"; }; rstc@fffffd00 { @@ -403,6 +680,7 @@ pioA: gpio@fffff200 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioA_clk>; }; pioB: gpio@fffff400 { @@ -413,6 +691,7 @@ pioB: gpio@fffff400 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioB_clk>; }; pioC: gpio@fffff600 { @@ -423,6 +702,7 @@ pioC: gpio@fffff600 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCDE_clk>; }; pioD: gpio@fffff800 { @@ -433,6 +713,7 @@ pioD: gpio@fffff800 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCDE_clk>; }; pioE: gpio@fffffa00 { @@ -443,6 +724,7 @@ pioE: gpio@fffffa00 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioCDE_clk>; }; }; @@ -452,6 +734,8 @@ dbgu: serial@ffffee00 { interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -463,6 +747,8 @@ usart0: serial@fff8c000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -474,6 +760,8 @@ usart1: serial@fff90000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -485,6 +773,8 @@ usart2: serial@fff94000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -494,6 +784,8 @@ ssc0: ssc@fff98000 { interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -503,6 +795,8 @@ ssc1: ssc@fff9c000 { interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&ssc1_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -512,6 +806,8 @@ macb0: ethernet@fffbc000 { interrupts = <21 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -519,6 +815,8 @@ usb1: gadget@fff78000 { compatible = "atmel,at91rm9200-udc"; reg = <0xfff78000 0x4000>; interrupts = <24 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&udc_clk>, <&udpck>; + clock-names = "pclk", "hclk"; status = "disabled"; }; @@ -528,6 +826,7 @@ i2c0: i2c@fff88000 { interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi0_clk>; status = "disabled"; }; @@ -537,6 +836,8 @@ mmc0: mmc@fff80000 { interrupts = <10 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -546,6 +847,8 @@ mmc1: mmc@fff84000 { interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -568,6 +871,8 @@ spi0: spi@fffa4000 { interrupts = <14 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -579,6 +884,8 @@ spi1: spi@fffa8000 { interrupts = <15 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -587,6 +894,8 @@ pwm0: pwm@fffb8000 { reg = <0xfffb8000 0x300>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; + clocks = <&pwm_clk>; + clock-names = "pwm_clk"; status = "disabled"; }; }; @@ -622,6 +931,8 @@ usb0: ohci@00a00000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00a00000 0x100000>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 2>; + clocks = <&usb>, <&ohci_clk>, <&ohci_clk>, <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 15009c9f229328957221a7b536de9ce3c0e8e630..5cf93eecd8f1a7623b5ccefca6ed5a5fd940a5b2 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -29,6 +29,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <16367660>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <16367660>; + }; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index b8e79466014f05df2e90222f2074e9f41e3dde9e..31f7652612fc8f2f1e284b74eb6f9bef7e8e7986 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -25,6 +25,30 @@ i2c0: i2c@fffac000 { adc0: adc@fffe0000 { atmel,adc-startup-time = <40>; }; + + pmc: pmc@fffffc00 { + plla: pllack { + atmel,clk-input-range = <2000000 32000000>; + atmel,pll-clk-output-ranges = <745000000 800000000 0 0>, + <695000000 750000000 1 0>, + <645000000 700000000 2 0>, + <595000000 650000000 3 0>, + <545000000 600000000 0 1>, + <495000000 550000000 1 1>, + <445000000 500000000 2 1>, + <400000000 450000000 3 1>; + }; + + pllb: pllbck { + atmel,clk-input-range = <2000000 32000000>; + atmel,pll-clk-output-ranges = <30000000 100000000 0 0>; + }; + + mck: masterck { + atmel,clk-output-range = <0 133000000>; + atmel,clk-divisors = <1 2 4 6>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi index cb2c010e08e21fd5bd5b871aa3d3e496ffc0005e..d2919108e92d656dea8e7b4e353221a822fdb70b 100644 --- a/arch/arm/boot/dts/at91sam9g20ek_common.dtsi +++ b/arch/arm/boot/dts/at91sam9g20ek_common.dtsi @@ -26,6 +26,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index ace6bf197b708dd79e29054773d50c5f1a3fd864..932a669156af81674a4d2ffc12f3b6e729d4b731 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -14,6 +14,7 @@ #include #include #include +#include / { model = "Atmel AT91SAM9G45 family SoC"; @@ -53,6 +54,26 @@ memory { reg = <0x70000000 0x10000000>; }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <300000>; + }; + }; + ahb { compatible = "simple-bus"; #address-cells = <1>; @@ -77,11 +98,279 @@ ramc0: ramc@ffffe400 { compatible = "atmel,at91sam9g45-ddramc"; reg = <0xffffe400 0x200 0xffffe600 0x200>; + clocks = <&ddrck>; + clock-names = "ddrck"; }; pmc: pmc@fffffc00 { - compatible = "atmel,at91rm9200-pmc"; + compatible = "atmel,at91sam9g45-pmc"; reg = <0xfffffc00 0x100>; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + interrupt-controller; + #address-cells = <1>; + #size-cells = <0>; + #interrupt-cells = <1>; + + main_osc: main_osc { + compatible = "atmel,at91rm9200-clk-main-osc"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MOSCS>; + clocks = <&main_xtal>; + }; + + main: mainck { + compatible = "atmel,at91rm9200-clk-main"; + #clock-cells = <0>; + clocks = <&main_osc>; + }; + + plla: pllack { + compatible = "atmel,at91rm9200-clk-pll"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKA>; + clocks = <&main>; + reg = <0>; + atmel,clk-input-range = <2000000 32000000>; + #atmel,pll-clk-output-range-cells = <4>; + atmel,pll-clk-output-ranges = <745000000 800000000 0 0 + 695000000 750000000 1 0 + 645000000 700000000 2 0 + 595000000 650000000 3 0 + 545000000 600000000 0 1 + 495000000 555000000 1 1 + 445000000 500000000 2 1 + 400000000 450000000 3 1>; + }; + + plladiv: plladivck { + compatible = "atmel,at91sam9x5-clk-plldiv"; + #clock-cells = <0>; + clocks = <&plla>; + }; + + utmi: utmick { + compatible = "atmel,at91sam9x5-clk-utmi"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_LOCKU>; + clocks = <&main>; + }; + + mck: masterck { + compatible = "atmel,at91rm9200-clk-master"; + #clock-cells = <0>; + interrupts-extended = <&pmc AT91_PMC_MCKRDY>; + clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>; + atmel,clk-output-range = <0 133333333>; + atmel,clk-divisors = <1 2 4 3>; + }; + + usb: usbck { + compatible = "atmel,at91sam9x5-clk-usb"; + #clock-cells = <0>; + clocks = <&plladiv>, <&utmi>; + }; + + prog: progck { + compatible = "atmel,at91sam9g45-clk-programmable"; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = <&pmc>; + clocks = <&slow_xtal>, <&main>, <&plladiv>, <&utmi>, <&mck>; + + prog0: prog0 { + #clock-cells = <0>; + reg = <0>; + interrupts = ; + }; + + prog1: prog1 { + #clock-cells = <0>; + reg = <1>; + interrupts = ; + }; + }; + + systemck { + compatible = "atmel,at91rm9200-clk-system"; + #address-cells = <1>; + #size-cells = <0>; + + ddrck: ddrck { + #clock-cells = <0>; + reg = <2>; + clocks = <&mck>; + }; + + uhpck: uhpck { + #clock-cells = <0>; + reg = <6>; + clocks = <&usb>; + }; + + pck0: pck0 { + #clock-cells = <0>; + reg = <8>; + clocks = <&prog0>; + }; + + pck1: pck1 { + #clock-cells = <0>; + reg = <9>; + clocks = <&prog1>; + }; + }; + + periphck { + compatible = "atmel,at91rm9200-clk-peripheral"; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&mck>; + + pioA_clk: pioA_clk { + #clock-cells = <0>; + reg = <2>; + }; + + pioB_clk: pioB_clk { + #clock-cells = <0>; + reg = <3>; + }; + + pioC_clk: pioC_clk { + #clock-cells = <0>; + reg = <4>; + }; + + pioDE_clk: pioDE_clk { + #clock-cells = <0>; + reg = <5>; + }; + + trng_clk: trng_clk { + #clock-cells = <0>; + reg = <6>; + }; + + usart0_clk: usart0_clk { + #clock-cells = <0>; + reg = <7>; + }; + + usart1_clk: usart1_clk { + #clock-cells = <0>; + reg = <8>; + }; + + usart2_clk: usart2_clk { + #clock-cells = <0>; + reg = <9>; + }; + + usart3_clk: usart3_clk { + #clock-cells = <0>; + reg = <10>; + }; + + mci0_clk: mci0_clk { + #clock-cells = <0>; + reg = <11>; + }; + + twi0_clk: twi0_clk { + #clock-cells = <0>; + reg = <12>; + }; + + twi1_clk: twi1_clk { + #clock-cells = <0>; + reg = <13>; + }; + + spi0_clk: spi0_clk { + #clock-cells = <0>; + reg = <14>; + }; + + spi1_clk: spi1_clk { + #clock-cells = <0>; + reg = <15>; + }; + + ssc0_clk: ssc0_clk { + #clock-cells = <0>; + reg = <16>; + }; + + ssc1_clk: ssc1_clk { + #clock-cells = <0>; + reg = <17>; + }; + + tcb0_clk: tcb0_clk { + #clock-cells = <0>; + reg = <18>; + }; + + pwm_clk: pwm_clk { + #clock-cells = <0>; + reg = <19>; + }; + + adc_clk: adc_clk { + #clock-cells = <0>; + reg = <20>; + }; + + dma0_clk: dma0_clk { + #clock-cells = <0>; + reg = <21>; + }; + + uhphs_clk: uhphs_clk { + #clock-cells = <0>; + reg = <22>; + }; + + lcd_clk: lcd_clk { + #clock-cells = <0>; + reg = <23>; + }; + + ac97_clk: ac97_clk { + #clock-cells = <0>; + reg = <24>; + }; + + macb0_clk: macb0_clk { + #clock-cells = <0>; + reg = <25>; + }; + + isi_clk: isi_clk { + #clock-cells = <0>; + reg = <26>; + }; + + udphs_clk: udphs_clk { + #clock-cells = <0>; + reg = <27>; + }; + + aestdessha_clk: aestdessha_clk { + #clock-cells = <0>; + reg = <28>; + }; + + mci1_clk: mci1_clk { + #clock-cells = <0>; + reg = <29>; + }; + + vdec_clk: vdec_clk { + #clock-cells = <0>; + reg = <30>; + }; + }; }; rstc@fffffd00 { @@ -93,6 +382,7 @@ pit: timer@fffffd30 { compatible = "atmel,at91sam9260-pit"; reg = <0xfffffd30 0xf>; interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&mck>; }; @@ -105,12 +395,16 @@ tcb0: timer@fff7c000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfff7c000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; }; tcb1: timer@fffd4000 { compatible = "atmel,at91rm9200-tcb"; reg = <0xfffd4000 0x100>; interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>; + clock-names = "t0_clk", "t1_clk", "t2_clk"; }; dma: dma-controller@ffffec00 { @@ -118,6 +412,8 @@ dma: dma-controller@ffffec00 { reg = <0xffffec00 0x200>; interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; }; pinctrl@fffff200 { @@ -516,6 +812,7 @@ pioA: gpio@fffff200 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioA_clk>; }; pioB: gpio@fffff400 { @@ -526,6 +823,7 @@ pioB: gpio@fffff400 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioB_clk>; }; pioC: gpio@fffff600 { @@ -536,6 +834,7 @@ pioC: gpio@fffff600 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioC_clk>; }; pioD: gpio@fffff800 { @@ -546,6 +845,7 @@ pioD: gpio@fffff800 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioDE_clk>; }; pioE: gpio@fffffa00 { @@ -556,6 +856,7 @@ pioE: gpio@fffffa00 { gpio-controller; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pioDE_clk>; }; }; @@ -565,6 +866,8 @@ dbgu: serial@ffffee00 { interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_dbgu>; + clocks = <&mck>; + clock-names = "usart"; status = "disabled"; }; @@ -576,6 +879,8 @@ usart0: serial@fff8c000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart0>; + clocks = <&usart0_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -587,6 +892,8 @@ usart1: serial@fff90000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart1>; + clocks = <&usart1_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -598,6 +905,8 @@ usart2: serial@fff94000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart2>; + clocks = <&usart2_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -609,6 +918,8 @@ usart3: serial@fff98000 { atmel,use-dma-tx; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usart3>; + clocks = <&usart3_clk>; + clock-names = "usart"; status = "disabled"; }; @@ -618,6 +929,8 @@ macb0: ethernet@fffbc000 { interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_macb_rmii>; + clocks = <&macb0_clk>, <&macb0_clk>; + clock-names = "hclk", "pclk"; status = "disabled"; }; @@ -629,6 +942,7 @@ i2c0: i2c@fff84000 { pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi0_clk>; status = "disabled"; }; @@ -640,6 +954,7 @@ i2c1: i2c@fff88000 { pinctrl-0 = <&pinctrl_i2c1>; #address-cells = <1>; #size-cells = <0>; + clocks = <&twi1_clk>; status = "disabled"; }; @@ -649,6 +964,8 @@ ssc0: ssc@fff9c000 { interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>; + clocks = <&ssc0_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -658,6 +975,8 @@ ssc1: ssc@fffa0000 { interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>; + clocks = <&ssc1_clk>; + clock-names = "pclk"; status = "disabled"; }; @@ -667,6 +986,8 @@ adc0: adc@fffb0000 { compatible = "atmel,at91sam9g45-adc"; reg = <0xfffb0000 0x100>; interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&adc_clk>, <&adc_op_clk>; + clock-names = "adc_clk", "adc_op_clk"; atmel,adc-channels-used = <0xff>; atmel,adc-vref = <3300>; atmel,adc-startup-time = <40>; @@ -706,6 +1027,7 @@ pwm0: pwm@fffb8000 { reg = <0xfffb8000 0x300>; interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; #pwm-cells = <3>; + clocks = <&pwm_clk>; status = "disabled"; }; @@ -718,6 +1040,8 @@ mmc0: mmc@fff80000 { dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; + clocks = <&mci0_clk>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -730,6 +1054,8 @@ mmc1: mmc@fffd0000 { dma-names = "rxtx"; #address-cells = <1>; #size-cells = <0>; + clocks = <&mci1_clk>; + clock-names = "mci_clk"; status = "disabled"; }; @@ -752,6 +1078,8 @@ spi0: spi@fffa4000 { interrupts = <14 4 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi0>; + clocks = <&spi0_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -763,6 +1091,8 @@ spi1: spi@fffa8000 { interrupts = <15 4 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_spi1>; + clocks = <&spi1_clk>; + clock-names = "spi_clk"; status = "disabled"; }; @@ -773,6 +1103,8 @@ usb2: gadget@fff78000 { reg = <0x00600000 0x80000 0xfff78000 0x400>; interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>; + clocks = <&udphs_clk>, <&utmi>; + clock-names = "pclk", "hclk"; status = "disabled"; ep0 { @@ -835,6 +1167,8 @@ fb0: fb@0x00500000 { interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_fb>; + clocks = <&lcd_clk>, <&lcd_clk>; + clock-names = "hclk", "lcdc_clk"; status = "disabled"; }; @@ -861,6 +1195,9 @@ usb0: ohci@00700000 { compatible = "atmel,at91rm9200-ohci", "usb-ohci"; reg = <0x00700000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + //TODO + clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "usb_clk", "ohci_clk", "hclk", "uhpck"; status = "disabled"; }; @@ -868,6 +1205,9 @@ usb1: ehci@00800000 { compatible = "atmel,at91sam9g45-ehci", "usb-ehci"; reg = <0x00800000 0x100000>; interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>; + //TODO + clocks = <&usb>, <&uhphs_clk>, <&uhphs_clk>, <&uhpck>; + clock-names = "usb_clk", "ehci_clk", "hclk", "uhpck"; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index 9f5b0a6749955755b75ece053be16d6c563be051..96ccc7de4f0a1be42f05168c2fd4d1ffa7616842 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -31,6 +31,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index b84bac5bada400369450033f419e271224b96e19..2bfac310dbece7093c49b1c1ced69b0676d9e320 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -50,16 +50,18 @@ memory { reg = <0x20000000 0x10000000>; }; - slow_xtal: slow_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - main_xtal: main_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index 64bbe46e4f90aeb16d3c0c2d26e116595df0dee2..83d723711ae1c07efd4a663780d5b6baa2cb12f6 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -21,14 +21,6 @@ memory { reg = <0x20000000 0x8000000>; }; - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <16000000>; - }; - clocks { #address-cells = <1>; #size-cells = <1>; @@ -38,6 +30,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <16000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <16000000>; + }; }; ahb { @@ -56,6 +56,8 @@ i2c0: i2c@f8010000 { wm8904: codec@1a { compatible = "wm8904"; reg = <0x1a>; + clocks = <&pck0>; + clock-names = "mclk"; }; qt1070: keyboard@1b { diff --git a/arch/arm/boot/dts/at91sam9rl.dtsi b/arch/arm/boot/dts/at91sam9rl.dtsi index 1da183155eeeedad507d95703aebba3f5668c7ae..ab56c8b81dfa25686524e0405583e6aa90a4210d 100644 --- a/arch/arm/boot/dts/at91sam9rl.dtsi +++ b/arch/arm/boot/dts/at91sam9rl.dtsi @@ -50,19 +50,19 @@ memory { reg = <0x20000000 0x04000000>; }; - slow_xtal: slow_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - main_xtal: main_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - clocks { adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; #clock-cells = <0>; @@ -95,6 +95,7 @@ nand0: nand@40000000 { <0xffffe800 0x200>; atmel,nand-addr-offset = <21>; atmel,nand-cmd-offset = <22>; + atmel,nand-has-dma; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_nand>; gpios = <&pioD 17 GPIO_ACTIVE_HIGH>, @@ -348,6 +349,15 @@ ep6 { }; }; + dma0: dma-controller@ffffe600 { + compatible = "atmel,at91sam9rl-dma"; + reg = <0xffffe600 0x200>; + interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>; + #dma-cells = <2>; + clocks = <&dma0_clk>; + clock-names = "dma_clk"; + }; + ramc0: ramc@ffffea00 { compatible = "atmel,at91sam9260-sdramc"; reg = <0xffffea00 0x200>; diff --git a/arch/arm/boot/dts/at91sam9rlek.dts b/arch/arm/boot/dts/at91sam9rlek.dts index d4a010e40fe3e2803e9e3e4fdd171ffa35e98cb1..9be5b540eebf5a6d8f70d377931082a649a2605b 100644 --- a/arch/arm/boot/dts/at91sam9rlek.dts +++ b/arch/arm/boot/dts/at91sam9rlek.dts @@ -20,15 +20,6 @@ memory { reg = <0x20000000 0x4000000>; }; - - slow_xtal { - clock-frequency = <32768>; - }; - - main_xtal { - clock-frequency = <12000000>; - }; - clocks { #address-cells = <1>; #size-cells = <1>; @@ -38,6 +29,14 @@ main_clock: clock { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 2c0d6ea3ab412325252d4515d8c5b6af3e23425f..e1a5c70b885c87fabfa0569757a71db73dbf36cf 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -52,22 +52,24 @@ memory { reg = <0x20000000 0x10000000>; }; - slow_xtal: slow_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - main_xtal: main_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - adc_op_clk: adc_op_clk{ - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <5000000>; + adc_op_clk: adc_op_clk{ + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <5000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/at91sam9x5cm.dtsi b/arch/arm/boot/dts/at91sam9x5cm.dtsi index 8413e21192ebe973f9eeba5647b7f6a91b85ab31..229d6c24a9c408c37d5dcb46b279d457768b173d 100644 --- a/arch/arm/boot/dts/at91sam9x5cm.dtsi +++ b/arch/arm/boot/dts/at91sam9x5cm.dtsi @@ -23,12 +23,14 @@ main_clock: clock@0 { }; }; - slow_xtal { - clock-frequency = <32768>; - }; + clocks { + slow_xtal { + clock-frequency = <32768>; + }; - main_xtal { - clock-frequency = <12000000>; + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi index 6b05ae6d476f8ebbdba03d8b41e2b3e798dd547e..2ddaa513661150f48e41349c757c893af7fbc8e5 100644 --- a/arch/arm/boot/dts/bcm11351.dtsi +++ b/arch/arm/boot/dts/bcm11351.dtsi @@ -27,6 +27,25 @@ chosen { bootargs = "console=ttyS0,115200n8"; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm11351-cpu-method"; + secondary-boot-reg = <0x3500417c>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + gic: interrupt-controller@3ff00100 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/bcm21664.dtsi b/arch/arm/boot/dts/bcm21664.dtsi index 8b366822bb43bc99656953d80e0a7e671b890671..2016b72a8fb78e47610bc759d614a924d113e606 100644 --- a/arch/arm/boot/dts/bcm21664.dtsi +++ b/arch/arm/boot/dts/bcm21664.dtsi @@ -27,6 +27,25 @@ chosen { bootargs = "console=ttyS0,115200n8"; }; + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "brcm,bcm11351-cpu-method"; + secondary-boot-reg = <0x35004178>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <0>; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a9"; + reg = <1>; + }; + }; + gic: interrupt-controller@3ff00100 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; diff --git a/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts new file mode 100644 index 0000000000000000000000000000000000000000..9eec2ac1112fdef5cfc1a8cadfc2e2a756f91435 --- /dev/null +++ b/arch/arm/boot/dts/bcm7445-bcm97445svmb.dts @@ -0,0 +1,14 @@ +/dts-v1/; +#include "bcm7445.dtsi" + +/ { + model = "Broadcom STB (bcm7445), SVMB reference board"; + compatible = "brcm,bcm7445", "brcm,brcmstb"; + + memory { + device_type = "memory"; + reg = <0x00 0x00000000 0x00 0x40000000>, + <0x00 0x40000000 0x00 0x40000000>, + <0x00 0x80000000 0x00 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..0ca0f4e523d0adf4d6d2eac08482544f60dcbd67 --- /dev/null +++ b/arch/arm/boot/dts/bcm7445.dtsi @@ -0,0 +1,111 @@ +#include + +#include "skeleton.dtsi" + +/ { + #address-cells = <2>; + #size-cells = <2>; + model = "Broadcom STB (bcm7445)"; + compatible = "brcm,bcm7445", "brcm,brcmstb"; + interrupt-parent = <&gic>; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "brcm,brahma-b15"; + device_type = "cpu"; + enable-method = "brcm,brahma-b15"; + reg = <0>; + }; + + cpu@1 { + compatible = "brcm,brahma-b15"; + device_type = "cpu"; + enable-method = "brcm,brahma-b15"; + reg = <1>; + }; + + cpu@2 { + compatible = "brcm,brahma-b15"; + device_type = "cpu"; + enable-method = "brcm,brahma-b15"; + reg = <2>; + }; + + cpu@3 { + compatible = "brcm,brahma-b15"; + device_type = "cpu"; + enable-method = "brcm,brahma-b15"; + reg = <3>; + }; + }; + + gic: interrupt-controller@ffd00000 { + compatible = "brcm,brahma-b15-gic", "arm,cortex-a15-gic"; + reg = <0x00 0xffd01000 0x00 0x1000>, + <0x00 0xffd02000 0x00 0x2000>, + <0x00 0xffd04000 0x00 0x2000>, + <0x00 0xffd06000 0x00 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + }; + + rdb { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges = <0 0x00 0xf0000000 0x1000000>; + + serial@40ab00 { + compatible = "ns16550a"; + reg = <0x40ab00 0x20>; + reg-shift = <2>; + reg-io-width = <4>; + interrupts = ; + clock-frequency = <0x4d3f640>; + }; + + sun_top_ctrl: syscon@404000 { + compatible = "brcm,bcm7445-sun-top-ctrl", + "syscon"; + reg = <0x404000 0x51c>; + }; + + hif_cpubiuctrl: syscon@3e2400 { + compatible = "brcm,bcm7445-hif-cpubiuctrl", + "syscon"; + reg = <0x3e2400 0x5b4>; + }; + + hif_continuation: syscon@452000 { + compatible = "brcm,bcm7445-hif-continuation", + "syscon"; + reg = <0x452000 0x100>; + }; + }; + + smpboot { + compatible = "brcm,brcmstb-smpboot"; + syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>; + syscon-cont = <&hif_continuation>; + }; + + reboot { + compatible = "brcm,brcmstb-reboot"; + syscon = <&sun_top_ctrl 0x304 0x308>; + }; +}; diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi index 2477dac4d643ec7659bb4b9746349c0b6a64cec7..9d7c810ebd0b469a842611020d4ddc5858c288d4 100644 --- a/arch/arm/boot/dts/berlin2.dtsi +++ b/arch/arm/boot/dts/berlin2.dtsi @@ -22,6 +22,7 @@ / { cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,berlin-smp"; cpu@0 { compatible = "marvell,pj4b"; @@ -78,6 +79,11 @@ local-timer@ad0600 { clocks = <&chip CLKID_TWD>; }; + cpu-ctrl@dd0000 { + compatible = "marvell,berlin-cpu-ctrl"; + reg = <0xdd0000 0x10000>; + }; + apb@e80000 { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts index 995150f93795adcaee544ef48eaf9c403bc8817d..a357ce02a64e8cc78a1e0ba61457329f27605bd6 100644 --- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts +++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts @@ -34,6 +34,14 @@ &sdhci2 { status = "okay"; }; +&i2c0 { + status = "okay"; +}; + +&i2c2 { + status = "okay"; +}; + &uart0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi index 635a16a64cb4693aa536a3bce865ec386b77e0db..400c40fceccc7118722ff021e7711a6e9f9564dd 100644 --- a/arch/arm/boot/dts/berlin2q.dtsi +++ b/arch/arm/boot/dts/berlin2q.dtsi @@ -18,6 +18,7 @@ / { cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "marvell,berlin-smp"; cpu@0 { compatible = "arm,cortex-a9"; @@ -90,6 +91,8 @@ l2: l2-cache-controller@ac0000 { compatible = "arm,pl310-cache"; reg = <0xac0000 0x1000>; cache-level = <2>; + arm,data-latency = <2 2 2>; + arm,tag-latency = <2 2 2>; }; scu: snoop-control-unit@ad0000 { @@ -111,6 +114,11 @@ gic: interrupt-controller@ad1000 { #interrupt-cells = <3>; }; + cpu-ctrl@dd0000 { + compatible = "marvell,berlin-cpu-ctrl"; + reg = <0xdd0000 0x10000>; + }; + apb@e80000 { compatible = "simple-bus"; #address-cells = <1>; @@ -191,6 +199,32 @@ portd: gpio-port@3 { }; }; + i2c0: i2c@1400 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1400 0x100>; + interrupt-parent = <&aic>; + interrupts = <4>; + clocks = <&chip CLKID_CFG>; + pinctrl-0 = <&twsi0_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c1: i2c@1800 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x1800 0x100>; + interrupt-parent = <&aic>; + interrupts = <5>; + clocks = <&chip CLKID_CFG>; + pinctrl-0 = <&twsi1_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + timer0: timer@2c00 { compatible = "snps,dw-apb-timer"; reg = <0x2c00 0x14>; @@ -301,6 +335,16 @@ chip: chip-control@ea0000 { reg = <0xea0000 0x400>, <0xdd0170 0x10>; clocks = <&refclk>; clock-names = "refclk"; + + twsi0_pmux: twsi0-pmux { + groups = "G6"; + function = "twsi0"; + }; + + twsi1_pmux: twsi1-pmux { + groups = "G7"; + function = "twsi1"; + }; }; apb@fc0000 { @@ -311,6 +355,32 @@ apb@fc0000 { ranges = <0 0xfc0000 0x10000>; interrupt-parent = <&sic>; + i2c2: i2c@7000 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7000 0x100>; + interrupt-parent = <&sic>; + interrupts = <6>; + clocks = <&refclk>; + pinctrl-0 = <&twsi2_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + + i2c3: i2c@8000 { + compatible = "snps,designware-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x8000 0x100>; + interrupt-parent = <&sic>; + interrupts = <7>; + clocks = <&refclk>; + pinctrl-0 = <&twsi3_pmux>; + pinctrl-names = "default"; + status = "disabled"; + }; + uart0: uart@9000 { compatible = "snps,dw-apb-uart"; reg = <0x9000 0x100>; @@ -348,6 +418,16 @@ uart1_pmux: uart1-pmux { groups = "GSM14"; function = "uart1"; }; + + twsi2_pmux: twsi2-pmux { + groups = "GSM13"; + function = "twsi2"; + }; + + twsi3_pmux: twsi3-pmux { + groups = "GSM14"; + function = "twsi3"; + }; }; sic: interrupt-controller@e000 { diff --git a/arch/arm/boot/dts/cros-ec-keyboard.dtsi b/arch/arm/boot/dts/cros-ec-keyboard.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..9c7fb0acae79c9d3c34f58e1acca360057d0c43e --- /dev/null +++ b/arch/arm/boot/dts/cros-ec-keyboard.dtsi @@ -0,0 +1,105 @@ +/* + * Keyboard dts fragment for devices that use cros-ec-keyboard + * + * Copyright (c) 2014 Google, Inc + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include + +&cros_ec { + keyboard-controller { + compatible = "google,cros-ec-keyb"; + keypad,num-rows = <8>; + keypad,num-columns = <13>; + google,needs-ghost-filter; + + linux,keymap = < + MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA) + MATRIX_KEY(0x00, 0x02, KEY_F1) + MATRIX_KEY(0x00, 0x03, KEY_B) + MATRIX_KEY(0x00, 0x04, KEY_F10) + MATRIX_KEY(0x00, 0x06, KEY_N) + MATRIX_KEY(0x00, 0x08, KEY_EQUAL) + MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT) + + MATRIX_KEY(0x01, 0x01, KEY_ESC) + MATRIX_KEY(0x01, 0x02, KEY_F4) + MATRIX_KEY(0x01, 0x03, KEY_G) + MATRIX_KEY(0x01, 0x04, KEY_F7) + MATRIX_KEY(0x01, 0x06, KEY_H) + MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) + MATRIX_KEY(0x01, 0x09, KEY_F9) + MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) + + MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) + MATRIX_KEY(0x02, 0x01, KEY_TAB) + MATRIX_KEY(0x02, 0x02, KEY_F3) + MATRIX_KEY(0x02, 0x03, KEY_T) + MATRIX_KEY(0x02, 0x04, KEY_F6) + MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE) + MATRIX_KEY(0x02, 0x06, KEY_Y) + MATRIX_KEY(0x02, 0x07, KEY_102ND) + MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) + MATRIX_KEY(0x02, 0x09, KEY_F8) + + MATRIX_KEY(0x03, 0x01, KEY_GRAVE) + MATRIX_KEY(0x03, 0x02, KEY_F2) + MATRIX_KEY(0x03, 0x03, KEY_5) + MATRIX_KEY(0x03, 0x04, KEY_F5) + MATRIX_KEY(0x03, 0x06, KEY_6) + MATRIX_KEY(0x03, 0x08, KEY_MINUS) + MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) + + MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) + MATRIX_KEY(0x04, 0x01, KEY_A) + MATRIX_KEY(0x04, 0x02, KEY_D) + MATRIX_KEY(0x04, 0x03, KEY_F) + MATRIX_KEY(0x04, 0x04, KEY_S) + MATRIX_KEY(0x04, 0x05, KEY_K) + MATRIX_KEY(0x04, 0x06, KEY_J) + MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON) + MATRIX_KEY(0x04, 0x09, KEY_L) + MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH) + MATRIX_KEY(0x04, 0x0b, KEY_ENTER) + + MATRIX_KEY(0x05, 0x01, KEY_Z) + MATRIX_KEY(0x05, 0x02, KEY_C) + MATRIX_KEY(0x05, 0x03, KEY_V) + MATRIX_KEY(0x05, 0x04, KEY_X) + MATRIX_KEY(0x05, 0x05, KEY_COMMA) + MATRIX_KEY(0x05, 0x06, KEY_M) + MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT) + MATRIX_KEY(0x05, 0x08, KEY_SLASH) + MATRIX_KEY(0x05, 0x09, KEY_DOT) + MATRIX_KEY(0x05, 0x0b, KEY_SPACE) + + MATRIX_KEY(0x06, 0x01, KEY_1) + MATRIX_KEY(0x06, 0x02, KEY_3) + MATRIX_KEY(0x06, 0x03, KEY_4) + MATRIX_KEY(0x06, 0x04, KEY_2) + MATRIX_KEY(0x06, 0x05, KEY_8) + MATRIX_KEY(0x06, 0x06, KEY_7) + MATRIX_KEY(0x06, 0x08, KEY_0) + MATRIX_KEY(0x06, 0x09, KEY_9) + MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT) + MATRIX_KEY(0x06, 0x0b, KEY_DOWN) + MATRIX_KEY(0x06, 0x0c, KEY_RIGHT) + + MATRIX_KEY(0x07, 0x01, KEY_Q) + MATRIX_KEY(0x07, 0x02, KEY_E) + MATRIX_KEY(0x07, 0x03, KEY_R) + MATRIX_KEY(0x07, 0x04, KEY_W) + MATRIX_KEY(0x07, 0x05, KEY_I) + MATRIX_KEY(0x07, 0x06, KEY_U) + MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT) + MATRIX_KEY(0x07, 0x08, KEY_P) + MATRIX_KEY(0x07, 0x09, KEY_O) + MATRIX_KEY(0x07, 0x0b, KEY_UP) + MATRIX_KEY(0x07, 0x0c, KEY_LEFT) + >; + }; +}; diff --git a/arch/arm/boot/dts/dove-cubox-es.dts b/arch/arm/boot/dts/dove-cubox-es.dts new file mode 100644 index 0000000000000000000000000000000000000000..e28ef056dd17dd63b5c6f230396558f5c1ea438e --- /dev/null +++ b/arch/arm/boot/dts/dove-cubox-es.dts @@ -0,0 +1,12 @@ +#include "dove-cubox.dts" + +/ { + model = "SolidRun CuBox (Engineering Sample)"; + compatible = "solidrun,cubox-es", "solidrun,cubox", "marvell,dove"; +}; + +&sdio0 { + /* sdio0 card detect is connected to wrong pin on CuBox ES */ + cd-gpios = <&gpio0 12 1>; + pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>; +}; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 7a70f4ca502a1665fa21cb31360d2869cbd3617c..aae7efc09b0bd1ecd66e72193c6aefe107008b9e 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -111,9 +111,6 @@ clkout2 { &sdio0 { status = "okay"; - /* sdio0 card detect is connected to wrong pin on CuBox */ - cd-gpios = <&gpio0 12 1>; - pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>; }; &spi0 { diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 3b891dd209933551b82a36aa04c6213214fb672c..a5441d5482a63a0a9203f3333b96c87ec1912b11 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -630,6 +630,20 @@ gpio2: gpio-ctrl@e8400 { reg = <0xe8400 0x0c>; ngpios = <8>; }; + + lcd1: lcd-controller@810000 { + compatible = "marvell,dove-lcd"; + reg = <0x810000 0x1000>; + interrupts = <46>; + status = "disabled"; + }; + + lcd0: lcd-controller@820000 { + compatible = "marvell,dove-lcd"; + reg = <0x820000 0x1000>; + interrupts = <47>; + status = "disabled"; + }; }; }; }; diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts index 83089540e324b6fee667245e68e998ea6ad4e126..50f8022905a1f36e415f93f8638055993d5f4b5d 100644 --- a/arch/arm/boot/dts/dra7-evm.dts +++ b/arch/arm/boot/dts/dra7-evm.dts @@ -496,3 +496,11 @@ partition@9 { }; }; }; + +&usb2_phy1 { + phy-supply = <&ldousb_reg>; +}; + +&usb2_phy2 { + phy-supply = <&ldousb_reg>; +}; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 80127638b379437af61720c557a337d9c5c88b9f..97f603c4483d6a46032f06f7961d801091d1b3a4 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -12,6 +12,9 @@ #include "skeleton.dtsi" +#define MAX_SOURCES 400 +#define DIRECT_IRQ(irq) (MAX_SOURCES + irq) + / { #address-cells = <1>; #size-cells = <1>; @@ -45,6 +48,7 @@ gic: interrupt-controller@48211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; #interrupt-cells = <3>; + arm,routable-irqs = <192>; reg = <0x48211000 0x1000>, <0x48212000 0x1000>, <0x48214000 0x2000>, @@ -79,8 +83,8 @@ ocp { ti,hwmods = "l3_main_1", "l3_main_2"; reg = <0x44000000 0x1000000>, <0x45000000 0x1000>; - interrupts = , - ; + interrupts = , + ; prm: prm@4ae06000 { compatible = "ti,dra7-prm"; @@ -95,6 +99,75 @@ prm_clockdomains: clockdomains { }; }; + axi@0 { + compatible = "simple-bus"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0x51000000 0x51000000 0x3000 + 0x0 0x20000000 0x10000000>; + pcie@51000000 { + compatible = "ti,dra7-pcie"; + reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>; + reg-names = "rc_dbics", "ti_conf", "config"; + interrupts = <0 232 0x4>, <0 233 0x4>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x03000 0 0x00010000 + 0x82000000 0 0x20013000 0x13000 0 0xffed000>; + #interrupt-cells = <1>; + num-lanes = <1>; + ti,hwmods = "pcie1"; + phys = <&pcie1_phy>; + phy-names = "pcie-phy0"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie1_intc 1>, + <0 0 0 2 &pcie1_intc 2>, + <0 0 0 3 &pcie1_intc 3>, + <0 0 0 4 &pcie1_intc 4>; + pcie1_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + + axi@1 { + compatible = "simple-bus"; + #size-cells = <1>; + #address-cells = <1>; + ranges = <0x51800000 0x51800000 0x3000 + 0x0 0x30000000 0x10000000>; + status = "disabled"; + pcie@51000000 { + compatible = "ti,dra7-pcie"; + reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>; + reg-names = "rc_dbics", "ti_conf", "config"; + interrupts = <0 355 0x4>, <0 356 0x4>; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0 0x03000 0 0x00010000 + 0x82000000 0 0x30013000 0x13000 0 0xffed000>; + #interrupt-cells = <1>; + num-lanes = <1>; + ti,hwmods = "pcie2"; + phys = <&pcie2_phy>; + phy-names = "pcie-phy0"; + interrupt-map-mask = <0 0 0 7>; + interrupt-map = <0 0 0 1 &pcie2_intc 1>, + <0 0 0 2 &pcie2_intc 2>, + <0 0 0 3 &pcie2_intc 3>, + <0 0 0 4 &pcie2_intc 4>; + pcie2_intc: interrupt-controller { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <1>; + }; + }; + }; + cm_core_aon: cm_core_aon@4a005000 { compatible = "ti,dra7-cm-core-aon"; reg = <0x4a005000 0x2000>; @@ -155,10 +228,10 @@ dra7_pmx_core: pinmux@4a003400 { sdma: dma-controller@4a056000 { compatible = "ti,omap4430-sdma"; reg = <0x4a056000 0x1000>; - interrupts = , - , - , - ; + interrupts = , + , + , + ; #dma-cells = <1>; #dma-channels = <32>; #dma-requests = <127>; @@ -167,7 +240,7 @@ sdma: dma-controller@4a056000 { gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; reg = <0x4ae10000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio1"; gpio-controller; #gpio-cells = <2>; @@ -178,7 +251,7 @@ gpio1: gpio@4ae10000 { gpio2: gpio@48055000 { compatible = "ti,omap4-gpio"; reg = <0x48055000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio2"; gpio-controller; #gpio-cells = <2>; @@ -189,7 +262,7 @@ gpio2: gpio@48055000 { gpio3: gpio@48057000 { compatible = "ti,omap4-gpio"; reg = <0x48057000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio3"; gpio-controller; #gpio-cells = <2>; @@ -200,7 +273,7 @@ gpio3: gpio@48057000 { gpio4: gpio@48059000 { compatible = "ti,omap4-gpio"; reg = <0x48059000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio4"; gpio-controller; #gpio-cells = <2>; @@ -211,7 +284,7 @@ gpio4: gpio@48059000 { gpio5: gpio@4805b000 { compatible = "ti,omap4-gpio"; reg = <0x4805b000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio5"; gpio-controller; #gpio-cells = <2>; @@ -222,7 +295,7 @@ gpio5: gpio@4805b000 { gpio6: gpio@4805d000 { compatible = "ti,omap4-gpio"; reg = <0x4805d000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio6"; gpio-controller; #gpio-cells = <2>; @@ -233,7 +306,7 @@ gpio6: gpio@4805d000 { gpio7: gpio@48051000 { compatible = "ti,omap4-gpio"; reg = <0x48051000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio7"; gpio-controller; #gpio-cells = <2>; @@ -244,7 +317,7 @@ gpio7: gpio@48051000 { gpio8: gpio@48053000 { compatible = "ti,omap4-gpio"; reg = <0x48053000 0x200>; - interrupts = ; + interrupts = ; ti,hwmods = "gpio8"; gpio-controller; #gpio-cells = <2>; @@ -255,7 +328,7 @@ gpio8: gpio@48053000 { uart1: serial@4806a000 { compatible = "ti,omap4-uart"; reg = <0x4806a000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; @@ -264,7 +337,7 @@ uart1: serial@4806a000 { uart2: serial@4806c000 { compatible = "ti,omap4-uart"; reg = <0x4806c000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; @@ -273,7 +346,7 @@ uart2: serial@4806c000 { uart3: serial@48020000 { compatible = "ti,omap4-uart"; reg = <0x48020000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; @@ -282,7 +355,7 @@ uart3: serial@48020000 { uart4: serial@4806e000 { compatible = "ti,omap4-uart"; reg = <0x4806e000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; @@ -291,7 +364,7 @@ uart4: serial@4806e000 { uart5: serial@48066000 { compatible = "ti,omap4-uart"; reg = <0x48066000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; @@ -300,7 +373,7 @@ uart5: serial@48066000 { uart6: serial@48068000 { compatible = "ti,omap4-uart"; reg = <0x48068000 0x100>; - interrupts = ; + interrupts = ; ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; @@ -309,6 +382,7 @@ uart6: serial@48068000 { uart7: serial@48420000 { compatible = "ti,omap4-uart"; reg = <0x48420000 0x100>; + interrupts = ; ti,hwmods = "uart7"; clock-frequency = <48000000>; status = "disabled"; @@ -317,6 +391,7 @@ uart7: serial@48420000 { uart8: serial@48422000 { compatible = "ti,omap4-uart"; reg = <0x48422000 0x100>; + interrupts = ; ti,hwmods = "uart8"; clock-frequency = <48000000>; status = "disabled"; @@ -325,6 +400,7 @@ uart8: serial@48422000 { uart9: serial@48424000 { compatible = "ti,omap4-uart"; reg = <0x48424000 0x100>; + interrupts = ; ti,hwmods = "uart9"; clock-frequency = <48000000>; status = "disabled"; @@ -333,15 +409,133 @@ uart9: serial@48424000 { uart10: serial@4ae2b000 { compatible = "ti,omap4-uart"; reg = <0x4ae2b000 0x100>; + interrupts = ; ti,hwmods = "uart10"; clock-frequency = <48000000>; status = "disabled"; }; + mailbox1: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + ti,hwmods = "mailbox1"; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + status = "disabled"; + }; + + mailbox2: mailbox@4883a000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883a000 0x200>; + ti,hwmods = "mailbox2"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox3: mailbox@4883c000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883c000 0x200>; + ti,hwmods = "mailbox3"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox4: mailbox@4883e000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4883e000 0x200>; + ti,hwmods = "mailbox4"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox5: mailbox@48840000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48840000 0x200>; + ti,hwmods = "mailbox5"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox6: mailbox@48842000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48842000 0x200>; + ti,hwmods = "mailbox6"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox7: mailbox@48844000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48844000 0x200>; + ti,hwmods = "mailbox7"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox8: mailbox@48846000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48846000 0x200>; + ti,hwmods = "mailbox8"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox9: mailbox@4885e000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4885e000 0x200>; + ti,hwmods = "mailbox9"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox10: mailbox@48860000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48860000 0x200>; + ti,hwmods = "mailbox10"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox11: mailbox@48862000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48862000 0x200>; + ti,hwmods = "mailbox11"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox12: mailbox@48864000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48864000 0x200>; + ti,hwmods = "mailbox12"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + + mailbox13: mailbox@48802000 { + compatible = "ti,omap4-mailbox"; + reg = <0x48802000 0x200>; + ti,hwmods = "mailbox13"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <12>; + status = "disabled"; + }; + timer1: timer@4ae18000 { compatible = "ti,omap5430-timer"; reg = <0x4ae18000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer1"; ti,timer-alwon; }; @@ -349,28 +543,28 @@ timer1: timer@4ae18000 { timer2: timer@48032000 { compatible = "ti,omap5430-timer"; reg = <0x48032000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer2"; }; timer3: timer@48034000 { compatible = "ti,omap5430-timer"; reg = <0x48034000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer3"; }; timer4: timer@48036000 { compatible = "ti,omap5430-timer"; reg = <0x48036000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer4"; }; timer5: timer@48820000 { compatible = "ti,omap5430-timer"; reg = <0x48820000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer5"; ti,timer-dsp; }; @@ -378,7 +572,7 @@ timer5: timer@48820000 { timer6: timer@48822000 { compatible = "ti,omap5430-timer"; reg = <0x48822000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer6"; ti,timer-dsp; ti,timer-pwm; @@ -387,7 +581,7 @@ timer6: timer@48822000 { timer7: timer@48824000 { compatible = "ti,omap5430-timer"; reg = <0x48824000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer7"; ti,timer-dsp; }; @@ -395,7 +589,7 @@ timer7: timer@48824000 { timer8: timer@48826000 { compatible = "ti,omap5430-timer"; reg = <0x48826000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer8"; ti,timer-dsp; ti,timer-pwm; @@ -404,21 +598,21 @@ timer8: timer@48826000 { timer9: timer@4803e000 { compatible = "ti,omap5430-timer"; reg = <0x4803e000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer9"; }; timer10: timer@48086000 { compatible = "ti,omap5430-timer"; reg = <0x48086000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer10"; }; timer11: timer@48088000 { compatible = "ti,omap5430-timer"; reg = <0x48088000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "timer11"; ti,timer-pwm; }; @@ -426,6 +620,7 @@ timer11: timer@48088000 { timer13: timer@48828000 { compatible = "ti,omap5430-timer"; reg = <0x48828000 0x80>; + interrupts = ; ti,hwmods = "timer13"; status = "disabled"; }; @@ -433,6 +628,7 @@ timer13: timer@48828000 { timer14: timer@4882a000 { compatible = "ti,omap5430-timer"; reg = <0x4882a000 0x80>; + interrupts = ; ti,hwmods = "timer14"; status = "disabled"; }; @@ -440,6 +636,7 @@ timer14: timer@4882a000 { timer15: timer@4882c000 { compatible = "ti,omap5430-timer"; reg = <0x4882c000 0x80>; + interrupts = ; ti,hwmods = "timer15"; status = "disabled"; }; @@ -447,6 +644,7 @@ timer15: timer@4882c000 { timer16: timer@4882e000 { compatible = "ti,omap5430-timer"; reg = <0x4882e000 0x80>; + interrupts = ; ti,hwmods = "timer16"; status = "disabled"; }; @@ -454,7 +652,7 @@ timer16: timer@4882e000 { wdt2: wdt@4ae14000 { compatible = "ti,omap4-wdt"; reg = <0x4ae14000 0x80>; - interrupts = ; + interrupts = ; ti,hwmods = "wd_timer2"; }; @@ -468,14 +666,14 @@ hwspinlock: spinlock@4a0f6000 { dmm@4e000000 { compatible = "ti,omap5-dmm"; reg = <0x4e000000 0x800>; - interrupts = <0 113 0x4>; + interrupts = ; ti,hwmods = "dmm"; }; i2c1: i2c@48070000 { compatible = "ti,omap4-i2c"; reg = <0x48070000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c1"; @@ -485,7 +683,7 @@ i2c1: i2c@48070000 { i2c2: i2c@48072000 { compatible = "ti,omap4-i2c"; reg = <0x48072000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c2"; @@ -495,7 +693,7 @@ i2c2: i2c@48072000 { i2c3: i2c@48060000 { compatible = "ti,omap4-i2c"; reg = <0x48060000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c3"; @@ -505,7 +703,7 @@ i2c3: i2c@48060000 { i2c4: i2c@4807a000 { compatible = "ti,omap4-i2c"; reg = <0x4807a000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c4"; @@ -515,7 +713,7 @@ i2c4: i2c@4807a000 { i2c5: i2c@4807c000 { compatible = "ti,omap4-i2c"; reg = <0x4807c000 0x100>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "i2c5"; @@ -525,7 +723,7 @@ i2c5: i2c@4807c000 { mmc1: mmc@4809c000 { compatible = "ti,omap4-hsmmc"; reg = <0x4809c000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; @@ -538,7 +736,7 @@ mmc1: mmc@4809c000 { mmc2: mmc@480b4000 { compatible = "ti,omap4-hsmmc"; reg = <0x480b4000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc2"; ti,needs-special-reset; dmas = <&sdma 47>, <&sdma 48>; @@ -549,7 +747,7 @@ mmc2: mmc@480b4000 { mmc3: mmc@480ad000 { compatible = "ti,omap4-hsmmc"; reg = <0x480ad000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc3"; ti,needs-special-reset; dmas = <&sdma 77>, <&sdma 78>; @@ -560,7 +758,7 @@ mmc3: mmc@480ad000 { mmc4: mmc@480d1000 { compatible = "ti,omap4-hsmmc"; reg = <0x480d1000 0x400>; - interrupts = ; + interrupts = ; ti,hwmods = "mmc4"; ti,needs-special-reset; dmas = <&sdma 57>, <&sdma 58>; @@ -703,7 +901,7 @@ abb_gpu: regulator-abb-gpu { mcspi1: spi@48098000 { compatible = "ti,omap4-mcspi"; reg = <0x48098000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi1"; @@ -724,7 +922,7 @@ mcspi1: spi@48098000 { mcspi2: spi@4809a000 { compatible = "ti,omap4-mcspi"; reg = <0x4809a000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi2"; @@ -740,7 +938,7 @@ mcspi2: spi@4809a000 { mcspi3: spi@480b8000 { compatible = "ti,omap4-mcspi"; reg = <0x480b8000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi3"; @@ -753,7 +951,7 @@ mcspi3: spi@480b8000 { mcspi4: spi@480ba000 { compatible = "ti,omap4-mcspi"; reg = <0x480ba000 0x200>; - interrupts = ; + interrupts = ; #address-cells = <1>; #size-cells = <0>; ti,hwmods = "mcspi4"; @@ -773,6 +971,7 @@ qspi: qspi@4b300000 { clocks = <&qspi_gfclk_div>; clock-names = "fck"; num-cs = <4>; + interrupts = ; status = "disabled"; }; @@ -803,18 +1002,76 @@ sata_phy: phy@4A096000 { clock-names = "sysclk"; #phy-cells = <0>; }; + + pcie1_phy: pciephy@4a094000 { + compatible = "ti,phy-pipe3-pcie"; + reg = <0x4a094000 0x80>, /* phy_rx */ + <0x4a094400 0x64>; /* phy_tx */ + reg-names = "phy_rx", "phy_tx"; + ctrl-module = <&omap_control_pcie1phy>; + clocks = <&dpll_pcie_ref_ck>, + <&dpll_pcie_ref_m2ldo_ck>, + <&optfclk_pciephy1_32khz>, + <&optfclk_pciephy1_clk>, + <&optfclk_pciephy1_div_clk>, + <&optfclk_pciephy_div>; + clock-names = "dpll_ref", "dpll_ref_m2", + "wkupclk", "refclk", + "div-clk", "phy-div"; + #phy-cells = <0>; + id = <1>; + ti,hwmods = "pcie1-phy"; + }; + + pcie2_phy: pciephy@4a095000 { + compatible = "ti,phy-pipe3-pcie"; + reg = <0x4a095000 0x80>, /* phy_rx */ + <0x4a095400 0x64>; /* phy_tx */ + reg-names = "phy_rx", "phy_tx"; + ctrl-module = <&omap_control_pcie2phy>; + clocks = <&dpll_pcie_ref_ck>, + <&dpll_pcie_ref_m2ldo_ck>, + <&optfclk_pciephy2_32khz>, + <&optfclk_pciephy2_clk>, + <&optfclk_pciephy2_div_clk>, + <&optfclk_pciephy_div>; + clock-names = "dpll_ref", "dpll_ref_m2", + "wkupclk", "refclk", + "div-clk", "phy-div"; + #phy-cells = <0>; + ti,hwmods = "pcie2-phy"; + id = <2>; + status = "disabled"; + }; }; sata: sata@4a141100 { compatible = "snps,dwc-ahci"; reg = <0x4a140000 0x1100>, <0x4a141100 0x7>; - interrupts = ; + interrupts = ; phys = <&sata_phy>; phy-names = "sata-phy"; clocks = <&sata_ref_clk>; ti,hwmods = "sata"; }; + omap_control_pcie1phy: control-phy@0x4a003c40 { + compatible = "ti,control-phy-pcie"; + reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; + reg-names = "power", "control_sma", "pcie_pcs"; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + }; + + omap_control_pcie2phy: control-pcie@0x4a003c44 { + compatible = "ti,control-phy-pcie"; + reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>; + reg-names = "power", "control_sma", "pcie_pcs"; + clocks = <&sys_clkin1>; + clock-names = "sysclk"; + status = "disabled"; + }; + omap_control_usb2phy1: control-phy@4a002300 { compatible = "ti,control-phy-usb2"; reg = <0x4a002300 0x4>; @@ -885,7 +1142,7 @@ omap_dwc3_1@48880000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss1"; reg = <0x48880000 0x10000>; - interrupts = <0 77 4>; + interrupts = ; #address-cells = <1>; #size-cells = <1>; utmi-mode = <2>; @@ -893,7 +1150,7 @@ omap_dwc3_1@48880000 { usb1: usb@48890000 { compatible = "snps,dwc3"; reg = <0x48890000 0x17000>; - interrupts = <0 76 4>; + interrupts = ; phys = <&usb2_phy1>, <&usb3_phy1>; phy-names = "usb2-phy", "usb3-phy"; tx-fifo-resize; @@ -906,7 +1163,7 @@ omap_dwc3_2@488c0000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss2"; reg = <0x488c0000 0x10000>; - interrupts = <0 92 4>; + interrupts = ; #address-cells = <1>; #size-cells = <1>; utmi-mode = <2>; @@ -914,7 +1171,7 @@ omap_dwc3_2@488c0000 { usb2: usb@488d0000 { compatible = "snps,dwc3"; reg = <0x488d0000 0x17000>; - interrupts = <0 78 4>; + interrupts = ; phys = <&usb2_phy2>; phy-names = "usb2-phy"; tx-fifo-resize; @@ -928,7 +1185,7 @@ omap_dwc3_3@48900000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss3"; reg = <0x48900000 0x10000>; - /* interrupts = <0 TBD 4>; */ + interrupts = ; #address-cells = <1>; #size-cells = <1>; utmi-mode = <2>; @@ -937,7 +1194,7 @@ omap_dwc3_3@48900000 { usb3: usb@48910000 { compatible = "snps,dwc3"; reg = <0x48910000 0x17000>; - /* interrupts = <0 93 4>; */ + interrupts = ; tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; @@ -948,7 +1205,7 @@ omap_dwc3_4@48940000 { compatible = "ti,dwc3"; ti,hwmods = "usb_otg_ss4"; reg = <0x48940000 0x10000>; - /* interrupts = <0 TBD 4>; */ + interrupts = ; #address-cells = <1>; #size-cells = <1>; utmi-mode = <2>; @@ -957,7 +1214,7 @@ omap_dwc3_4@48940000 { usb4: usb@48950000 { compatible = "snps,dwc3"; reg = <0x48950000 0x17000>; - /* interrupts = <0 TBD 4>; */ + interrupts = ; tx-fifo-resize; maximum-speed = "high-speed"; dr_mode = "otg"; @@ -967,7 +1224,7 @@ usb4: usb@48950000 { elm: elm@48078000 { compatible = "ti,am3352-elm"; reg = <0x48078000 0xfc0>; /* device IO registers */ - interrupts = ; + interrupts = ; ti,hwmods = "elm"; status = "disabled"; }; @@ -976,7 +1233,7 @@ gpmc: gpmc@50000000 { compatible = "ti,am3352-gpmc"; ti,hwmods = "gpmc"; reg = <0x50000000 0x37c>; /* device IO registers */ - interrupts = ; + interrupts = ; gpmc,num-cs = <8>; gpmc,num-waitpins = <2>; #address-cells = <2>; @@ -994,6 +1251,17 @@ atl: atl@4843c000 { clock-names = "fck"; status = "disabled"; }; + + crossbar_mpu: crossbar@4a020000 { + compatible = "ti,irq-crossbar"; + reg = <0x4a002a48 0x130>; + ti,max-irqs = <160>; + ti,max-crossbar-sources = ; + ti,reg-size = <2>; + ti,irqs-reserved = <0 1 2 3 5 6 131 132>; + ti,irqs-skip = <10 133 139 140>; + ti,irqs-safe-map = <0>; + }; }; }; diff --git a/arch/arm/boot/dts/dra7xx-clocks.dtsi b/arch/arm/boot/dts/dra7xx-clocks.dtsi index dc7a292fe9397d43c68c987886218a199750eccd..2c05b3f017fa22ec4370c02e80fc390a65ed8772 100644 --- a/arch/arm/boot/dts/dra7xx-clocks.dtsi +++ b/arch/arm/boot/dts/dra7xx-clocks.dtsi @@ -1154,7 +1154,7 @@ dpll_pcie_ref_m2ldo_ck: dpll_pcie_ref_m2ldo_ck { apll_pcie_in_clk_mux: apll_pcie_in_clk_mux@4ae06118 { compatible = "ti,mux-clock"; - clocks = <&dpll_pcie_ref_ck>, <&pciesref_acs_clk_ck>; + clocks = <&dpll_pcie_ref_m2ldo_ck>, <&pciesref_acs_clk_ck>; #clock-cells = <0>; reg = <0x021c 0x4>; ti,bit-shift = <7>; @@ -1167,16 +1167,33 @@ apll_pcie_ck: apll_pcie_ck { reg = <0x021c>, <0x0220>; }; + optfclk_pciephy1_32khz: optfclk_pciephy1_32khz@4a0093b0 { + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + #clock-cells = <0>; + reg = <0x13b0>; + ti,bit-shift = <8>; + }; + + optfclk_pciephy2_32khz: optfclk_pciephy2_32khz@4a0093b8 { + compatible = "ti,gate-clock"; + clocks = <&sys_32k_ck>; + #clock-cells = <0>; + reg = <0x13b8>; + ti,bit-shift = <8>; + }; + optfclk_pciephy_div: optfclk_pciephy_div@4a00821c { compatible = "ti,divider-clock"; clocks = <&apll_pcie_ck>; #clock-cells = <0>; reg = <0x021c>; + ti,dividers = <2>, <1>; ti,bit-shift = <8>; ti,max-div = <2>; }; - optfclk_pciephy_clk: optfclk_pciephy_clk@4a0093b0 { + optfclk_pciephy1_clk: optfclk_pciephy1_clk@4a0093b0 { compatible = "ti,gate-clock"; clocks = <&apll_pcie_ck>; #clock-cells = <0>; @@ -1184,7 +1201,15 @@ optfclk_pciephy_clk: optfclk_pciephy_clk@4a0093b0 { ti,bit-shift = <9>; }; - optfclk_pciephy_div_clk: optfclk_pciephy_div_clk@4a0093b0 { + optfclk_pciephy2_clk: optfclk_pciephy2_clk@4a0093b8 { + compatible = "ti,gate-clock"; + clocks = <&apll_pcie_ck>; + #clock-cells = <0>; + reg = <0x13b8>; + ti,bit-shift = <9>; + }; + + optfclk_pciephy1_div_clk: optfclk_pciephy1_div_clk@4a0093b0 { compatible = "ti,gate-clock"; clocks = <&optfclk_pciephy_div>; #clock-cells = <0>; @@ -1192,6 +1217,14 @@ optfclk_pciephy_div_clk: optfclk_pciephy_div_clk@4a0093b0 { ti,bit-shift = <10>; }; + optfclk_pciephy2_div_clk: optfclk_pciephy2_div_clk@4a0093b8 { + compatible = "ti,gate-clock"; + clocks = <&optfclk_pciephy_div>; + #clock-cells = <0>; + reg = <0x13b8>; + ti,bit-shift = <10>; + }; + apll_pcie_clkvcoldo: apll_pcie_clkvcoldo { #clock-cells = <0>; compatible = "fixed-factor-clock"; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index e37985fa10e2b6aca96f047f788f9674ddf0bf9f..00eeed3721b63bfeb0bad99169557f660a03f1cc 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -31,11 +31,13 @@ cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clock-frequency = <533000000>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clock-frequency = <533000000>; }; }; diff --git a/arch/arm/boot/dts/ethernut5.dts b/arch/arm/boot/dts/ethernut5.dts index 143b6d25bc80e9229dca3e63d5d419ce32c6c80a..8f941c2db7c654e864dd0c2420d0786e95d4fd7f 100644 --- a/arch/arm/boot/dts/ethernut5.dts +++ b/arch/arm/boot/dts/ethernut5.dts @@ -20,6 +20,16 @@ memory { reg = <0x20000000 0x08000000>; }; + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; + }; + ahb { apb { dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/evk-pro3.dts b/arch/arm/boot/dts/evk-pro3.dts index 4d829685fdfb1d026df02a0a16b308f189b970bb..f72969efe6d79ad857392d30794c427d424d4d38 100644 --- a/arch/arm/boot/dts/evk-pro3.dts +++ b/arch/arm/boot/dts/evk-pro3.dts @@ -15,6 +15,12 @@ / { model = "Telit EVK-PRO3 for Telit GE863-PRO3"; compatible = "telit,evk-pro3", "atmel,at91sam9260", "atmel,at91sam9"; + clocks { + slow_xtal { + clock-frequency = <32768>; + }; + }; + ahb { apb { macb0: ethernet@fffc4000 { diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi index 3e678fa335bf7dc2981bb3a7c7a19f6871f68617..1d52de6370d58a65022b0bc59bf2f07516066308 100644 --- a/arch/arm/boot/dts/exynos3250.dtsi +++ b/arch/arm/boot/dts/exynos3250.dtsi @@ -39,6 +39,8 @@ aliases { i2c5 = &i2c_5; i2c6 = &i2c_6; i2c7 = &i2c_7; + serial0 = &serial_0; + serial1 = &serial_1; }; cpus { @@ -168,6 +170,15 @@ rtc: rtc@10070000 { status = "disabled"; }; + tmu: tmu@100C0000 { + compatible = "samsung,exynos3250-tmu"; + reg = <0x100C0000 0x100>; + interrupts = <0 216 0>; + clocks = <&cmu CLK_TMU_APBIF>; + clock-names = "tmu_apbif"; + status = "disabled"; + }; + gic: interrupt-controller@10481000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; @@ -195,7 +206,6 @@ pinctrl_1: pinctrl@11000000 { wakeup-interrupt-controller { compatible = "samsung,exynos4210-wakeup-eint"; - interrupt-parent = <&gic>; interrupts = <0 48 0>; }; }; @@ -234,7 +244,6 @@ amba { compatible = "arm,amba-bus"; #address-cells = <1>; #size-cells = <1>; - interrupt-parent = <&gic>; ranges; pdma0: pdma@12680000 { @@ -261,10 +270,11 @@ pdma1: pdma@12690000 { }; adc: adc@126C0000 { - compatible = "samsung,exynos-adc-v3"; + compatible = "samsung,exynos3250-adc", + "samsung,exynos-adc-v2"; reg = <0x126C0000 0x100>, <0x10020718 0x4>; interrupts = <0 137 0>; - clock-names = "adc", "sclk_tsadc"; + clock-names = "adc", "sclk"; clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>; #io-channel-cells = <1>; io-channel-ranges; @@ -277,6 +287,8 @@ serial_0: serial@13800000 { interrupts = <0 109 0>; clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>; clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_data &uart0_fctl>; status = "disabled"; }; @@ -286,6 +298,8 @@ serial_1: serial@13810000 { interrupts = <0 110 0>; clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>; clock-names = "uart", "clk_uart_baud0"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_data>; status = "disabled"; }; @@ -425,6 +439,19 @@ spi_1: spi@13930000 { status = "disabled"; }; + i2s2: i2s@13970000 { + compatible = "samsung,s3c6410-i2s"; + reg = <0x13970000 0x100>; + interrupts = <0 126 0>; + clocks = <&cmu CLK_I2S>, <&cmu CLK_SCLK_I2S>; + clock-names = "iis", "i2s_opclk0"; + dmas = <&pdma0 14>, <&pdma0 13>; + dma-names = "tx", "rx"; + pinctrl-0 = <&i2s2_bus>; + pinctrl-names = "default"; + status = "disabled"; + }; + pwm: pwm@139D0000 { compatible = "samsung,exynos4210-pwm"; reg = <0x139D0000 0x1000>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index 17b22e9cc2aa315669bc1e2b984a0ece7ac66136..e0278ecbc816a10291c65a1540e696aecbea9248 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -44,6 +44,10 @@ aliases { fimc1 = &fimc_1; fimc2 = &fimc_2; fimc3 = &fimc_3; + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; }; clock_audss: clock-controller@03810000 { @@ -123,6 +127,12 @@ combiner: interrupt-controller@10440000 { reg = <0x10440000 0x1000>; }; + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupt-parent = <&combiner>; + interrupts = <2 2>, <3 2>; + }; + sys_reg: syscon@10010000 { compatible = "samsung,exynos4-sysreg", "syscon"; reg = <0x10010000 0x400>; @@ -322,6 +332,23 @@ ehci@12580000 { clocks = <&clock CLK_USB_HOST>; clock-names = "usbhost"; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&exynos_usbphy 1>; + status = "disabled"; + }; + port@1 { + reg = <1>; + phys = <&exynos_usbphy 2>; + status = "disabled"; + }; + port@2 { + reg = <2>; + phys = <&exynos_usbphy 3>; + status = "disabled"; + }; }; ohci@12590000 { @@ -331,6 +358,13 @@ ohci@12590000 { clocks = <&clock CLK_USB_HOST>; clock-names = "usbhost"; status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + phys = <&exynos_usbphy 1>; + status = "disabled"; + }; }; i2s1: i2s@13960000 { @@ -363,7 +397,7 @@ mfc: codec@13400000 { status = "disabled"; }; - serial@13800000 { + serial_0: serial@13800000 { compatible = "samsung,exynos4210-uart"; reg = <0x13800000 0x100>; interrupts = <0 52 0>; @@ -372,7 +406,7 @@ serial@13800000 { status = "disabled"; }; - serial@13810000 { + serial_1: serial@13810000 { compatible = "samsung,exynos4210-uart"; reg = <0x13810000 0x100>; interrupts = <0 53 0>; @@ -381,7 +415,7 @@ serial@13810000 { status = "disabled"; }; - serial@13820000 { + serial_2: serial@13820000 { compatible = "samsung,exynos4210-uart"; reg = <0x13820000 0x100>; interrupts = <0 54 0>; @@ -390,7 +424,7 @@ serial@13820000 { status = "disabled"; }; - serial@13830000 { + serial_3: serial@13830000 { compatible = "samsung,exynos4210-uart"; reg = <0x13830000 0x100>; interrupts = <0 55 0>; @@ -608,6 +642,7 @@ fimd: fimd@11c00000 { clocks = <&clock CLK_SCLK_FIMD0>, <&clock CLK_FIMD0>; clock-names = "sclk_fimd", "fimd"; samsung,power-domain = <&pd_lcd0>; + samsung,sysreg = <&sys_reg>; status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/exynos4210-smdkv310.dts b/arch/arm/boot/dts/exynos4210-smdkv310.dts index 636d16684750e4f342048d3bf3207a8929581b42..676e6e0c8cf396b562bc3971db21ef93deb35406 100644 --- a/arch/arm/boot/dts/exynos4210-smdkv310.dts +++ b/arch/arm/boot/dts/exynos4210-smdkv310.dts @@ -168,6 +168,7 @@ eeprom@52 { }; spi_2: spi@13940000 { + cs-gpios = <&gpc1 2 0>; status = "okay"; w25x80@0 { @@ -178,7 +179,6 @@ w25x80@0 { spi-max-frequency = <1000000>; controller-data { - cs-gpio = <&gpc1 2 0>; samsung,spi-feedback-delay = <0>; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 97ea7a9b1f62cb0e582824441a203e1c5c699834..807bb5bf91fc84db70430ba17b7f507b6ca11a76 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -103,12 +103,6 @@ clock: clock-controller@10030000 { #clock-cells = <1>; }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupt-parent = <&combiner>; - interrupts = <2 2>, <3 2>; - }; - pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos4210-pinctrl"; reg = <0x11400000 0x1000>; diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..6d6d23c83d30a70e63eae3f5d04d9b8a77da8013 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi @@ -0,0 +1,371 @@ +/* + * Common definition for Hardkernel's Exynos4412 based ODROID-X/X2/U2/U3 boards + * device tree source + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include +#include "exynos4412.dtsi" + +/ { + firmware@0204F000 { + compatible = "samsung,secure-firmware"; + reg = <0x0204F000 0x1000>; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&gpio_power_key>; + + power_key { + interrupt-parent = <&gpx1>; + interrupts = <3 0>; + gpios = <&gpx1 3 1>; + linux,code = ; + label = "power key"; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + i2s0: i2s@03830000 { + pinctrl-0 = <&i2s0_bus>; + pinctrl-names = "default"; + status = "okay"; + clocks = <&clock_audss EXYNOS_I2S_BUS>, + <&clock_audss EXYNOS_DOUT_AUD_BUS>; + clock-names = "iis", "i2s_opclk0"; + }; + + sound: sound { + compatible = "samsung,odroidx2-audio"; + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&max98090>; + }; + + mmc@12550000 { + pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; + pinctrl-names = "default"; + vmmc-supply = <&ldo20_reg &buck8_reg>; + status = "okay"; + + num-slots = <1>; + supports-highspeed; + broken-cd; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + watchdog@10060000 { + status = "okay"; + }; + + rtc@10070000 { + status = "okay"; + }; + + g2d@10800000 { + status = "okay"; + }; + + camera { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <>; + + fimc_0: fimc@11800000 { + status = "okay"; + }; + + fimc_1: fimc@11810000 { + status = "okay"; + }; + + fimc_2: fimc@11820000 { + status = "okay"; + }; + + fimc_3: fimc@11830000 { + status = "okay"; + }; + }; + + sdhci@12530000 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-names = "default"; + vmmc-supply = <&ldo4_reg &ldo21_reg>; + cd-gpios = <&gpk2 2 0>; + cd-inverted; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; + + i2c@13860000 { + pinctrl-0 = <&i2c0_bus>; + pinctrl-names = "default"; + status = "okay"; + + usb3503: usb3503@08 { + compatible = "smsc,usb3503"; + reg = <0x08>; + + intn-gpios = <&gpx3 0 0>; + connect-gpios = <&gpx3 4 0>; + reset-gpios = <&gpx3 5 0>; + initial-mode = <1>; + }; + + max77686: pmic@09 { + compatible = "maxim,max77686"; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "VDD_ALIVE_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "VDDQ_M1_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VDDQ_EXT_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VDDQ_MMC2_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo5_reg: LDO5 { + regulator-name = "VDDQ_MMC1_3_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VDD10_MPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VDD10_XPLL_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "VDD18_ABB1_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "VDD33_USB_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "VDDQ_C2C_W_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "VDD18_ABB0_2_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "VDD10_HSIC_1.0V"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "VDD18_HSIC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo20_reg: LDO20 { + regulator-name = "LDO20_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + ldo21_reg: LDO21 { + regulator-name = "LDO21_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo25_reg: LDO25 { + regulator-name = "VDDQ_LCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-microvolt-offset = <50000>; + }; + + buck5_reg: BUCK5 { + regulator-name = "VDDQ_CKEM1_2_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "BUCK6_1.35V"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "BUCK7_2.0V"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "BUCK8_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + }; + }; + }; + + i2c@13870000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + status = "okay"; + max98090: max98090@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpx0>; + interrupts = <0 0>; + }; + }; + + exynos-usbphy@125B0000 { + status = "okay"; + }; + + hsotg@12480000 { + status = "okay"; + vusb_d-supply = <&ldo15_reg>; + vusb_a-supply = <&ldo12_reg>; + }; + + ehci: ehci@12580000 { + status = "okay"; + }; +}; + +&pinctrl_1 { + gpio_power_key: power_key { + samsung,pins = "gpx1-3"; + samsung,pin-pud = <0>; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412-odroidu3.dts b/arch/arm/boot/dts/exynos4412-odroidu3.dts new file mode 100644 index 0000000000000000000000000000000000000000..c8a64be55d071ce863085e838477e983f20ed2a7 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-odroidu3.dts @@ -0,0 +1,61 @@ +/* + * Hardkernel's Exynos4412 based ODROID-U3 board device tree source + * + * Copyright (c) 2014 Marek Szyprowski + * + * Device tree source file for Hardkernel's ODROID-U3 board which is based + * on Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos4412-odroid-common.dtsi" + +/ { + model = "Hardkernel ODROID-U3 board based on Exynos4412"; + compatible = "hardkernel,odroid-u3", "samsung,exynos4412", "samsung,exynos4"; + + memory { + reg = <0x40000000 0x7FF00000>; + }; + + leds { + compatible = "gpio-leds"; + led1 { + label = "led1:heart"; + gpios = <&gpc1 0 1>; + default-state = "on"; + linux,default-trigger = "heartbeat"; + }; + }; +}; + +&usb3503 { + clock-names = "refclk"; + clocks = <&pmu_system_controller 0>; + refclk-frequency = <24000000>; +}; + +&ehci { + port@1 { + status = "okay"; + }; + port@2 { + status = "okay"; + }; +}; + +&sound { + compatible = "samsung,odroidu3-audio"; + samsung,model = "Odroid-U3"; + samsung,audio-routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Headphone Jack", "MICBIAS", + "IN1", "Headphone Jack", + "Speakers", "SPKL", + "Speakers", "SPKR"; +}; diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts index 31db28a4bb33e86f18233fa8336a3a0cee28ca87..cb1cfe7239c44373a764cf14a739738807325961 100644 --- a/arch/arm/boot/dts/exynos4412-odroidx.dts +++ b/arch/arm/boot/dts/exynos4412-odroidx.dts @@ -3,8 +3,8 @@ * * Copyright (c) 2012 Dongjin Kim * - * Device tree source file for Hardkernel's ODROID-X board which is based on - * Samsung's Exynos4412 SoC. + * Device tree source file for Hardkernel's ODROID-X board which is based + * on Samsung's Exynos4412 SoC. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,14 +12,14 @@ */ /dts-v1/; -#include "exynos4412.dtsi" +#include "exynos4412-odroid-common.dtsi" / { model = "Hardkernel ODROID-X board based on Exynos4412"; compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4"; memory { - reg = <0x40000000 0x40000000>; + reg = <0x40000000 0x3FF00000>; }; leds { @@ -38,23 +38,25 @@ led2 { }; }; - mmc@12550000 { - pinctrl-0 = <&sd4_clk &sd4_cmd &sd4_bus4 &sd4_bus8>; - pinctrl-names = "default"; - vmmc-supply = <&ldo20_reg &buck8_reg>; + serial@13820000 { status = "okay"; + }; - num-slots = <1>; - supports-highspeed; - broken-cd; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; + serial@13830000 { + status = "okay"; + }; - slot@0 { - reg = <0>; - bus-width = <8>; + gpio_keys { + pinctrl-0 = <&gpio_power_key &gpio_home_key>; + + home_key { + interrupt-parent = <&gpx2>; + interrupts = <2 0>; + gpios = <&gpx2 2 0>; + linux,code = ; + label = "home key"; + debounce-interval = <10>; + gpio-key,wakeup; }; }; @@ -65,242 +67,19 @@ regulator_p3v3 { regulator-max-microvolt = <3300000>; gpio = <&gpa1 1 1>; enable-active-high; - regulator-boot-on; - }; - - rtc@10070000 { - status = "okay"; - }; - - sdhci@12530000 { - bus-width = <4>; - pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; - pinctrl-names = "default"; - vmmc-supply = <&ldo4_reg &ldo21_reg>; - status = "okay"; - }; - - serial@13800000 { - status = "okay"; - }; - - serial@13810000 { - status = "okay"; - }; - - serial@13820000 { - status = "okay"; + regulator-always-on; }; +}; - serial@13830000 { +&ehci { + port@1 { status = "okay"; }; +}; - fixed-rate-clocks { - xxti { - compatible = "samsung,clock-xxti"; - clock-frequency = <0>; - }; - - xusbxti { - compatible = "samsung,clock-xusbxti"; - clock-frequency = <24000000>; - }; - }; - - i2c@13860000 { - pinctrl-0 = <&i2c0_bus>; - pinctrl-names = "default"; - status = "okay"; - - max77686: pmic@09 { - compatible = "maxim,max77686"; - reg = <0x09>; - #clock-cells = <1>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "VDD_ALIVE_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "VDDQ_M1_2_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "VDDQ_EXT_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo4_reg: LDO4 { - regulator-name = "VDDQ_MMC2_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo5_reg: LDO5 { - regulator-name = "VDDQ_MMC1_3_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo6_reg: LDO6 { - regulator-name = "VDD10_MPLL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "VDD10_XPLL_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo11_reg: LDO11 { - regulator-name = "VDD18_ABB1_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "VDD33_USB_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo13_reg: LDO13 { - regulator-name = "VDDQ_C2C_W_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo14_reg: LDO14 { - regulator-name = "VDD18_ABB0_2_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo15_reg: LDO15 { - regulator-name = "VDD10_HSIC_1.0V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "VDD18_HSIC_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo20_reg: LDO20 { - regulator-name = "LDO20_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-boot-on; - }; - - ldo21_reg: LDO21 { - regulator-name = "LDO21_3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - regulator-boot-on; - }; - - ldo25_reg: LDO25 { - regulator-name = "VDDQ_LCD_1.8V"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1100000>; - regulator-microvolt-offset = <50000>; - }; - - buck5_reg: BUCK5 { - regulator-name = "VDDQ_CKEM1_2_1.2V"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "BUCK6_1.35V"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "BUCK7_2.0V"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "BUCK8_2.8V"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - }; - }; - }; +&pinctrl_1 { + gpio_home_key: home_key { + samsung,pins = "gpx2-2"; + samsung,pin-pud = <0>; }; }; diff --git a/arch/arm/boot/dts/exynos4412-odroidx2.dts b/arch/arm/boot/dts/exynos4412-odroidx2.dts new file mode 100644 index 0000000000000000000000000000000000000000..96b43f4497cc0eefb931456bc34be4365a66dcb6 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-odroidx2.dts @@ -0,0 +1,32 @@ +/* + * Hardkernel's Exynos4412 based ODROID-X2 board device tree source + * + * Copyright (c) 2012 Dongjin Kim + * + * Device tree source file for Hardkernel's ODROID-X2 board which is based + * on Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "exynos4412-odroidx.dts" + +/ { + model = "Hardkernel ODROID-X2 board based on Exynos4412"; + compatible = "hardkernel,odroid-x2", "samsung,exynos4412", "samsung,exynos4"; + + memory { + reg = <0x40000000 0x7FF00000>; + }; +}; + +&sound { + samsung,model = "Odroid-X2"; + samsung,audio-routing = + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "IN1", "Mic Jack", + "Mic Jack", "MICBIAS"; +}; diff --git a/arch/arm/boot/dts/exynos4412-trats2.dts b/arch/arm/boot/dts/exynos4412-trats2.dts index 77878447b3121f59009a7578f170be08f4915a56..11967f4561e023430e4f192b77c0c29c1aef3e7b 100644 --- a/arch/arm/boot/dts/exynos4412-trats2.dts +++ b/arch/arm/boot/dts/exynos4412-trats2.dts @@ -589,6 +589,7 @@ cm36651@18 { spi_1: spi@13930000 { pinctrl-names = "default"; pinctrl-0 = <&spi1_bus>; + cs-gpios = <&gpb 5 0>; status = "okay"; s5c73m3_spi: s5c73m3 { @@ -596,7 +597,6 @@ s5c73m3_spi: s5c73m3 { spi-max-frequency = <50000000>; reg = <0>; controller-data { - cs-gpio = <&gpb 5 0>; samsung,spi-feedback-delay = <2>; }; }; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index c42a3e196cd5db7fdac7dd843e15c1f884b0e0ce..d8bc059e172ff1562ea4525cedc2ad14948a4bad 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -26,6 +26,10 @@ combiner: interrupt-controller@10440000 { samsung,combiner-nr = <20>; }; + pmu { + interrupts = <2 2>, <3 2>, <18 2>, <19 2>; + }; + gic: interrupt-controller@10490000 { cpu-offset = <0x4000>; }; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index de1f9c77b589af5e9084ffd1fdac7b96c6c67c39..861bb919f6d391ea44f097565eb0d36781d1a20a 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -31,12 +31,6 @@ aliases { mshc0 = &mshc_0; }; - pmu { - compatible = "arm,cortex-a9-pmu"; - interrupt-parent = <&combiner>; - interrupts = <2 2>, <3 2>, <18 2>, <19 2>; - }; - sysram@02020000 { compatible = "mmio-sram"; reg = <0x02020000 0x40000>; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 79d0608d6dcc44ae895251086a665afcde2cf2e9..a0cc0b6f8f96d52c24729dd1432327e4935f389b 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -18,6 +18,13 @@ / { interrupt-parent = <&gic>; + aliases { + serial0 = &serial_0; + serial1 = &serial_1; + serial2 = &serial_2; + serial3 = &serial_3; + }; + chipid@10000000 { compatible = "samsung,exynos4210-chipid"; reg = <0x10000000 0x100>; @@ -50,25 +57,25 @@ gic: interrupt-controller@10481000 { interrupts = <1 9 0xf04>; }; - serial@12C00000 { + serial_0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; interrupts = <0 51 0>; }; - serial@12C10000 { + serial_1: serial@12C10000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C10000 0x100>; interrupts = <0 52 0>; }; - serial@12C20000 { + serial_2: serial@12C20000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C20000 0x100>; interrupts = <0 53 0>; }; - serial@12C30000 { + serial_3: serial@12C30000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C30000 0x100>; interrupts = <0 54 0>; @@ -87,6 +94,7 @@ fimd@14400000 { reg = <0x14400000 0x40000>; interrupt-names = "fifo", "vsync", "lcd_sys"; interrupts = <18 4>, <18 5>, <18 6>; + samsung,sysreg = <&sysreg_system_controller>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/exynos5250-cros-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi index 89ac90f59e2efbd1419daa401abb6b5703ca1ac0..e603e9c70142ffe00e6156b1436db293bcd30325 100644 --- a/arch/arm/boot/dts/exynos5250-cros-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi @@ -27,177 +27,18 @@ pinctrl@11400000 { i2c2_bus: i2c2-bus { samsung,pin-pud = <0>; }; - - max77686_irq: max77686-irq { - samsung,pins = "gpx3-2"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; }; i2c@12C60000 { status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - - max77686@09 { - compatible = "maxim,max77686"; - interrupt-parent = <&gpx3>; - interrupts = <2 0>; - pinctrl-names = "default"; - pinctrl-0 = <&max77686_irq>; - wakeup-source; - reg = <0x09>; - #clock-cells = <1>; - - voltage-regulators { - ldo1_reg: LDO1 { - regulator-name = "P1.0V_LDO_OUT1"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo2_reg: LDO2 { - regulator-name = "P1.8V_LDO_OUT2"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo3_reg: LDO3 { - regulator-name = "P1.8V_LDO_OUT3"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo7_reg: LDO7 { - regulator-name = "P1.1V_LDO_OUT7"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - ldo8_reg: LDO8 { - regulator-name = "P1.0V_LDO_OUT8"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo10_reg: LDO10 { - regulator-name = "P1.8V_LDO_OUT10"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo12_reg: LDO12 { - regulator-name = "P3.0V_LDO_OUT12"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo14_reg: LDO14 { - regulator-name = "P1.8V_LDO_OUT14"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - ldo15_reg: LDO15 { - regulator-name = "P1.0V_LDO_OUT15"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1000000>; - regulator-always-on; - }; - - ldo16_reg: LDO16 { - regulator-name = "P1.8V_LDO_OUT16"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck2_reg: BUCK2 { - regulator-name = "vdd_arm"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - buck3_reg: BUCK3 { - regulator-name = "vdd_int"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - }; - - buck4_reg: BUCK4 { - regulator-name = "vdd_g3d"; - regulator-min-microvolt = <850000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck5_reg: BUCK5 { - regulator-name = "P1.8V_BUCK_OUT5"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - }; - - buck6_reg: BUCK6 { - regulator-name = "P1.35V_BUCK_OUT6"; - regulator-min-microvolt = <1350000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - }; - - buck7_reg: BUCK7 { - regulator-name = "P2.0V_BUCK_OUT7"; - regulator-min-microvolt = <2000000>; - regulator-max-microvolt = <2000000>; - regulator-always-on; - }; - - buck8_reg: BUCK8 { - regulator-name = "P2.85V_BUCK_OUT8"; - regulator-min-microvolt = <2850000>; - regulator-max-microvolt = <2850000>; - regulator-always-on; - }; - }; - }; }; i2c@12C70000 { status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; - - trackpad { - reg = <0x67>; - compatible = "cypress,cyapa"; - interrupts = <2 0>; - interrupt-parent = <&gpx1>; - wakeup-source; - }; }; i2c@12C80000 { diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index a794a705d4040ec220c7b380e09dbc83a9193025..b4b35adae565e0fe22eaf933ecd79e9203224293 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -44,6 +44,8 @@ eeprom@50 { max77686@09 { compatible = "maxim,max77686"; reg = <0x09>; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; voltage-regulators { ldo1_reg: LDO1 { @@ -316,6 +318,7 @@ slot@0 { }; spi_1: spi@12d30000 { + cs-gpios = <&gpa2 5 0>; status = "okay"; w25q80bw@0 { @@ -326,7 +329,6 @@ w25q80bw@0 { spi-max-frequency = <1000000>; controller-data { - cs-gpio = <&gpa2 5 0>; samsung,spi-feedback-delay = <0>; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index 079fdf9e3f1870076a8e6123ff9d140ce46e2617..f2b8c411654110cf56a8a03ba21768be0621d3d2 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -137,7 +137,7 @@ battery: sbs-battery@b { sbs,poll-retry-count = <1>; }; - ec: embedded-controller { + cros_ec: embedded-controller { compatible = "google,cros-ec-i2c"; reg = <0x1e>; interrupts = <6 0>; @@ -145,95 +145,6 @@ ec: embedded-controller { pinctrl-names = "default"; pinctrl-0 = <&ec_irq>; wakeup-source; - - keyboard-controller { - compatible = "google,cros-ec-keyb"; - keypad,num-rows = <8>; - keypad,num-columns = <13>; - google,needs-ghost-filter; - linux,keymap = <0x0001007d /* L_META */ - 0x0002003b /* F1 */ - 0x00030030 /* B */ - 0x00040044 /* F10 */ - 0x00060031 /* N */ - 0x0008000d /* = */ - 0x000a0064 /* R_ALT */ - - 0x01010001 /* ESC */ - 0x0102003e /* F4 */ - 0x01030022 /* G */ - 0x01040041 /* F7 */ - 0x01060023 /* H */ - 0x01080028 /* ' */ - 0x01090043 /* F9 */ - 0x010b000e /* BKSPACE */ - - 0x0200001d /* L_CTRL */ - 0x0201000f /* TAB */ - 0x0202003d /* F3 */ - 0x02030014 /* T */ - 0x02040040 /* F6 */ - 0x0205001b /* ] */ - 0x02060015 /* Y */ - 0x02070056 /* 102ND */ - 0x0208001a /* [ */ - 0x02090042 /* F8 */ - - 0x03010029 /* GRAVE */ - 0x0302003c /* F2 */ - 0x03030006 /* 5 */ - 0x0304003f /* F5 */ - 0x03060007 /* 6 */ - 0x0308000c /* - */ - 0x030b002b /* \ */ - - 0x04000061 /* R_CTRL */ - 0x0401001e /* A */ - 0x04020020 /* D */ - 0x04030021 /* F */ - 0x0404001f /* S */ - 0x04050025 /* K */ - 0x04060024 /* J */ - 0x04080027 /* ; */ - 0x04090026 /* L */ - 0x040a002b /* \ */ - 0x040b001c /* ENTER */ - - 0x0501002c /* Z */ - 0x0502002e /* C */ - 0x0503002f /* V */ - 0x0504002d /* X */ - 0x05050033 /* , */ - 0x05060032 /* M */ - 0x0507002a /* L_SHIFT */ - 0x05080035 /* / */ - 0x05090034 /* . */ - 0x050B0039 /* SPACE */ - - 0x06010002 /* 1 */ - 0x06020004 /* 3 */ - 0x06030005 /* 4 */ - 0x06040003 /* 2 */ - 0x06050009 /* 8 */ - 0x06060008 /* 7 */ - 0x0608000b /* 0 */ - 0x0609000a /* 9 */ - 0x060a0038 /* L_ALT */ - 0x060b006c /* DOWN */ - 0x060c006a /* RIGHT */ - - 0x07010010 /* Q */ - 0x07020012 /* E */ - 0x07030013 /* R */ - 0x07040011 /* W */ - 0x07050017 /* I */ - 0x07060016 /* U */ - 0x07070036 /* R_SHIFT */ - 0x07080019 /* P */ - 0x07090018 /* O */ - 0x070b0067 /* UP */ - 0x070c0069>; /* LEFT */ - }; }; power-regulator { @@ -351,6 +262,7 @@ i2s0: i2s@03830000 { sound { compatible = "google,snow-audio-max98095"; + samsung,model = "Snow-I2S-MAX98095"; samsung,i2s-controller = <&i2s0>; samsung,audio-codec = <&max98095>; }; @@ -431,3 +343,170 @@ timing1: timing@1 { }; }; }; + +&i2c_0 { + max77686@09 { + compatible = "maxim,max77686"; + interrupt-parent = <&gpx3>; + interrupts = <2 0>; + pinctrl-names = "default"; + pinctrl-0 = <&max77686_irq>; + wakeup-source; + reg = <0x09>; + #clock-cells = <1>; + + voltage-regulators { + ldo1_reg: LDO1 { + regulator-name = "P1.0V_LDO_OUT1"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo2_reg: LDO2 { + regulator-name = "P1.8V_LDO_OUT2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "P1.8V_LDO_OUT3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "P1.1V_LDO_OUT7"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "P1.0V_LDO_OUT8"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "P1.8V_LDO_OUT10"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "P3.0V_LDO_OUT12"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "P1.8V_LDO_OUT14"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "P1.0V_LDO_OUT15"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "P1.8V_LDO_OUT16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "vdd_mif"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "vdd_int"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + regulator-boot-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "vdd_g3d"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + buck5_reg: BUCK5 { + regulator-name = "P1.8V_BUCK_OUT5"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + buck6_reg: BUCK6 { + regulator-name = "P1.35V_BUCK_OUT6"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + buck7_reg: BUCK7 { + regulator-name = "P2.0V_BUCK_OUT7"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + buck8_reg: BUCK8 { + regulator-name = "P2.85V_BUCK_OUT8"; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c_1 { + trackpad { + reg = <0x67>; + compatible = "cypress,cyapa"; + interrupts = <2 0>; + interrupt-parent = <&gpx1>; + wakeup-source; + }; +}; + +&pinctrl_0 { + max77686_irq: max77686-irq { + samsung,pins = "gpx3-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; + +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/exynos5260.dtsi b/arch/arm/boot/dts/exynos5260.dtsi index 5398a60207ca9487609dc03f8f3dac2069f0b39c..36da38e29000d0e077a1651d7586e979ea2ffb07 100644 --- a/arch/arm/boot/dts/exynos5260.dtsi +++ b/arch/arm/boot/dts/exynos5260.dtsi @@ -21,6 +21,10 @@ aliases { pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; }; cpus { @@ -227,6 +231,11 @@ pinctrl_2: pinctrl@128B0000 { interrupts = <0 243 0>; }; + pmu_system_controller: system-controller@10D50000 { + compatible = "samsung,exynos5260-pmu", "syscon"; + reg = <0x10D50000 0x10000>; + }; + uart0: serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; diff --git a/arch/arm/boot/dts/exynos5410.dtsi b/arch/arm/boot/dts/exynos5410.dtsi index 3839c26f467f1cb93cad6fb2415f0cd1a7c1ad34..731eefd23fa999aef4479d705ffc499d297a2680 100644 --- a/arch/arm/boot/dts/exynos5410.dtsi +++ b/arch/arm/boot/dts/exynos5410.dtsi @@ -20,6 +20,12 @@ / { compatible = "samsung,exynos5410", "samsung,exynos5"; interrupt-parent = <&gic>; + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -28,24 +34,28 @@ CPU0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x0>; + clock-frequency = <1600000000>; }; CPU1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x1>; + clock-frequency = <1600000000>; }; CPU2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x2>; + clock-frequency = <1600000000>; }; CPU3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a15"; reg = <0x3>; + clock-frequency = <1600000000>; }; }; @@ -87,6 +97,11 @@ chipid@10000000 { reg = <0x10000000 0x100>; }; + pmu_system_controller: system-controller@10040000 { + compatible = "samsung,exynos5410-pmu", "syscon"; + reg = <0x10040000 0x5000>; + }; + mct: mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0xB00>; diff --git a/arch/arm/boot/dts/exynos5420-peach-pit.dts b/arch/arm/boot/dts/exynos5420-peach-pit.dts index 1c5b8f9f4a36345829d992344fbf4d686b067917..228a6b1e0aa10378f604c7f08feb0cf6c9ad4919 100644 --- a/arch/arm/boot/dts/exynos5420-peach-pit.dts +++ b/arch/arm/boot/dts/exynos5420-peach-pit.dts @@ -25,8 +25,18 @@ / { "google,pit", "google,peach","samsung,exynos5420", "samsung,exynos5"; - memory { - reg = <0x20000000 0x80000000>; + aliases { + /* Assign 20 so we don't get confused w/ builtin ones */ + i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel"; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; }; fixed-rate-clocks { @@ -50,18 +60,14 @@ power { }; }; - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 1000000 0>; - brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; - default-brightness-level = <7>; - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; + memory { + reg = <0x20000000 0x80000000>; }; sound { compatible = "google,snow-audio-max98090"; + samsung,model = "Peach-Pit-I2S-MAX98090"; samsung,i2s-controller = <&i2s0>; samsung,audio-codec = <&max98090>; }; @@ -87,66 +93,92 @@ usb301_vbus_reg: regulator-usb301 { pinctrl-0 = <&usb301_vbus_en>; enable-active-high; }; -}; -&pinctrl_0 { - max98090_irq: max98090-irq { - samsung,pins = "gpx0-2"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + vbat: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "vbat-supply"; + regulator-boot-on; + regulator-always-on; }; +}; - tpm_irq: tpm-irq { - samsung,pins = "gpx1-0"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd_gpio>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x06>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx2 6 0>; - power_key_irq: power-key-irq { - samsung,pins = "gpx1-2"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; + display-timings { + native-mode = <&timing1>; - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; + timing1: timing@1 { + clock-frequency = <70589280>; + hactive = <1366>; + vactive = <768>; + hfront-porch = <40>; + hback-porch = <40>; + hsync-len = <32>; + vback-porch = <10>; + vfront-porch = <12>; + vsync-len = <6>; + }; }; +}; - dp_hpd_gpio: dp_hpd_gpio { - samsung,pins = "gpx2-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; +&fimd { + status = "okay"; + samsung,invert-vclk; }; -&pinctrl_3 { - usb300_vbus_en: usb300-vbus-en { - samsung,pins = "gph0-0"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + ddc = <&i2c_2>; +}; + +&hsi2c_7 { + status = "okay"; + + max98090: codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupts = <2 0>; + interrupt-parent = <&gpx0>; + pinctrl-names = "default"; + pinctrl-0 = <&max98090_irq>; }; +}; - usb301_vbus_en: usb301-vbus-en { - samsung,pins = "gph0-1"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; +&hsi2c_9 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + + /* Unused irq; but still need to configure the pins */ + pinctrl-names = "default"; + pinctrl-0 = <&tpm_irq>; }; }; -&rtc { +&i2c_2 { status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; }; -&uart_3 { +&i2s0 { status = "okay"; }; @@ -189,46 +221,210 @@ slot@0 { }; }; -&hsi2c_7 { - status = "okay"; - max98090: codec@10 { - compatible = "maxim,max98090"; - reg = <0x10>; - interrupts = <2 0>; - interrupt-parent = <&gpx0>; - pinctrl-names = "default"; - pinctrl-0 = <&max98090_irq>; +&pinctrl_0 { + pinctrl-names = "default"; + pinctrl-0 = <&mask_tpm_reset>; + + max98090_irq: max98090-irq { + samsung,pins = "gpx0-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + /* We need GPX0_6 to be low at sleep time; just keep it low always */ + mask_tpm_reset: mask-tpm-reset { + samsung,pins = "gpx0-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + samsung,pin-val = <0>; + }; + + tpm_irq: tpm-irq { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ec_irq: ec-irq { + samsung,pins = "gpx1-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + tps65090_irq: tps65090-irq { + samsung,pins = "gpx2-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + dp_hpd_gpio: dp_hpd_gpio { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; }; }; -&hsi2c_9 { - status = "okay"; - clock-frequency = <400000>; +&pinctrl_3 { + /* Drive SPI lines at x2 for better integrity */ + spi2-bus { + samsung,pin-drv = <2>; + }; - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; + /* Drive SPI chip select at x2 for better integrity */ + ec_spi_cs: ec-spi-cs { + samsung,pins = "gpb1-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; - /* Unused irq; but still need to configure the pins */ - pinctrl-names = "default"; - pinctrl-0 = <&tpm_irq>; + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gph0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gph0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; }; -&i2c_2 { +&rtc { status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x50>; }; -&hdmi { +&spi_2 { + status = "okay"; + num-cs = <1>; + samsung,spi-src-clk = <0>; + cs-gpios = <&gpb1 2 0>; + + cros_ec: cros-ec@0 { + compatible = "google,cros-ec-spi"; + interrupt-parent = <&gpx1>; + interrupts = <5 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_spi_cs &ec_irq>; + reg = <0>; + spi-max-frequency = <3125000>; + + controller-data { + samsung,spi-feedback-delay = <1>; + }; + + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + google,remote-bus = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + sbs,i2c-retry-count = <2>; + }; + + power-regulator@48 { + compatible = "ti,tps65090"; + reg = <0x48>; + + /* + * Config irq to disable internal pulls + * even though we run in polling mode. + */ + pinctrl-names = "default"; + pinctrl-0 = <&tps65090_irq>; + + vsys1-supply = <&vbat>; + vsys2-supply = <&vbat>; + vsys3-supply = <&vbat>; + infet1-supply = <&vbat>; + infet2-supply = <&vbat>; + infet3-supply = <&vbat>; + infet4-supply = <&vbat>; + infet5-supply = <&vbat>; + infet6-supply = <&vbat>; + infet7-supply = <&vbat>; + vsys-l1-supply = <&vbat>; + vsys-l2-supply = <&vbat>; + + regulators { + tps65090_dcdc1: dcdc1 { + ti,enable-ext-control; + }; + tps65090_dcdc2: dcdc2 { + ti,enable-ext-control; + }; + tps65090_dcdc3: dcdc3 { + ti,enable-ext-control; + }; + tps65090_fet1: fet1 { + regulator-name = "vcd_led"; + }; + tps65090_fet2: fet2 { + regulator-name = "video_mid"; + regulator-always-on; + }; + tps65090_fet3: fet3 { + regulator-name = "wwan_r"; + regulator-always-on; + }; + tps65090_fet4: fet4 { + regulator-name = "sdcard"; + regulator-always-on; + }; + tps65090_fet5: fet5 { + regulator-name = "camout"; + }; + tps65090_fet6: fet6 { + regulator-name = "lcd_vdd"; + }; + tps65090_fet7: fet7 { + regulator-name = "video_mid_1a"; + regulator-always-on; + }; + tps65090_ldo1: ldo1 { + }; + tps65090_ldo2: ldo2 { + }; + }; + + charger { + compatible = "ti,tps65090-charger"; + }; + }; + }; + }; +}; + +&uart_3 { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - ddc = <&i2c_2>; }; &usbdrd_phy0 { @@ -248,40 +444,4 @@ &watchdog { timeout-sec = <32>; }; -&i2s0 { - status = "okay"; -}; - -&fimd { - status = "okay"; - samsung,invert-vclk; -}; - -&dp { - status = "okay"; - pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd_gpio>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x06>; - samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx2 6 0>; - - display-timings { - native-mode = <&timing1>; - - timing1: timing@1 { - clock-frequency = <70589280>; - hactive = <1366>; - vactive = <768>; - hfront-porch = <40>; - hback-porch = <40>; - hsync-len = <32>; - vback-porch = <10>; - vfront-porch = <12>; - vsync-len = <6>; - }; - }; -}; +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index a40a5c2b5a4ff1a776a74e3fe24be0284140b8b9..bfe056d9148ce8d476b30c9fb54981154fefab5f 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -265,11 +265,6 @@ mfc_pd: power-domain@10044060 { clock-names = "oscclk", "pclk0", "clk0"; }; - disp_pd: power-domain@100440C0 { - compatible = "samsung,exynos4210-pd"; - reg = <0x100440C0 0x20>; - }; - msc_pd: power-domain@10044120 { compatible = "samsung,exynos4210-pd"; reg = <0x10044120 0x20>; @@ -520,8 +515,26 @@ dp: dp-controller@145B0000 { phy-names = "dp"; }; + mipi_phy: video-phy@10040714 { + compatible = "samsung,s5pv210-mipi-video-phy"; + reg = <0x10040714 12>; + #phy-cells = <1>; + }; + + dsi@14500000 { + compatible = "samsung,exynos5410-mipi-dsi"; + reg = <0x14500000 0x10000>; + interrupts = <0 82 0>; + phys = <&mipi_phy 1>; + phy-names = "dsim"; + clocks = <&clock CLK_DSIM1>, <&clock CLK_SCLK_MIPI1>; + clock-names = "bus_clk", "pll_clk"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + fimd: fimd@14400000 { - samsung,power-domain = <&disp_pd>; clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>; clock-names = "sclk_fimd", "fimd"; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index ae3a17c791f6f530ad6c8b95d63fa862b2c24e82..8f3373cd7b878b79f2e499518a7ec774ffd06db8 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -18,6 +18,8 @@ / { interrupt-parent = <&gic>; aliases { + serial0 = &serial_0; + serial1 = &serial_1; spi0 = &spi_0; tmuctrl0 = &tmuctrl_0; tmuctrl1 = &tmuctrl_1; @@ -102,7 +104,7 @@ cpufreq@160000 { >; }; - serial@B0000 { + serial_0: serial@B0000 { compatible = "samsung,exynos4210-uart"; reg = <0xB0000 0x1000>; interrupts = <0 2 0>; @@ -110,7 +112,7 @@ serial@B0000 { clock-names = "uart", "clk_uart_baud0"; }; - serial@C0000 { + serial_1: serial@C0000 { compatible = "samsung,exynos4210-uart"; reg = <0xC0000 0x1000>; interrupts = <0 3 0>; diff --git a/arch/arm/boot/dts/exynos5800-peach-pi.dts b/arch/arm/boot/dts/exynos5800-peach-pi.dts index f3af2079a06358a57695786ea61667fe7b4c9a4d..f3ee48bbe05f57d0a308f626dca96b5668b177c2 100644 --- a/arch/arm/boot/dts/exynos5800-peach-pi.dts +++ b/arch/arm/boot/dts/exynos5800-peach-pi.dts @@ -23,8 +23,18 @@ / { "google,pi", "google,peach", "samsung,exynos5800", "samsung,exynos5"; - memory { - reg = <0x20000000 0x80000000>; + aliases { + /* Assign 20 so we don't get confused w/ builtin ones */ + i2c20 = "/spi@12d40000/cros-ec@0/i2c-tunnel"; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 1000000 0>; + brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; + default-brightness-level = <7>; + pinctrl-0 = <&pwm0_out>; + pinctrl-names = "default"; }; fixed-rate-clocks { @@ -48,13 +58,16 @@ power { }; }; - backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 1000000 0>; - brightness-levels = <0 100 500 1000 1500 2000 2500 2800>; - default-brightness-level = <7>; - pinctrl-0 = <&pwm0_out>; - pinctrl-names = "default"; + memory { + reg = <0x20000000 0x80000000>; + }; + + sound { + compatible = "google,snow-audio-max98091"; + + samsung,model = "Peach-Pi-I2S-MAX98091"; + samsung,i2s-controller = <&i2s0>; + samsung,audio-codec = <&max98091>; }; usb300_vbus_reg: regulator-usb300 { @@ -78,59 +91,92 @@ usb301_vbus_reg: regulator-usb301 { pinctrl-0 = <&usb301_vbus_en>; enable-active-high; }; -}; -&pinctrl_0 { - tpm_irq: tpm-irq { - samsung,pins = "gpx1-0"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; + vbat: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "vbat-supply"; + regulator-boot-on; + regulator-always-on; }; +}; - power_key_irq: power-key-irq { - samsung,pins = "gpx1-2"; - samsung,pin-function = <0>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; - }; +&dp { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&dp_hpd_gpio>; + samsung,color-space = <0>; + samsung,dynamic-range = <0>; + samsung,ycbcr-coeff = <0>; + samsung,color-depth = <1>; + samsung,link-rate = <0x0a>; + samsung,lane-count = <2>; + samsung,hpd-gpio = <&gpx2 6 0>; - dp_hpd_gpio: dp_hpd_gpio { - samsung,pins = "gpx2-6"; - samsung,pin-function = <0>; - samsung,pin-pud = <3>; - samsung,pin-drv = <0>; - }; + display-timings { + native-mode = <&timing1>; - hdmi_hpd_irq: hdmi-hpd-irq { - samsung,pins = "gpx3-7"; - samsung,pin-function = <0>; - samsung,pin-pud = <1>; - samsung,pin-drv = <0>; + timing1: timing@1 { + clock-frequency = <150660000>; + hactive = <1920>; + vactive = <1080>; + hfront-porch = <60>; + hback-porch = <172>; + hsync-len = <80>; + vback-porch = <25>; + vfront-porch = <10>; + vsync-len = <10>; + }; }; }; -&pinctrl_3 { - usb300_vbus_en: usb300-vbus-en { - samsung,pins = "gph0-0"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; +&fimd { + status = "okay"; + samsung,invert-vclk; +}; + +&hdmi { + status = "okay"; + hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_hpd_irq>; + ddc = <&i2c_2>; +}; + +&hsi2c_7 { + status = "okay"; + + max98091: codec@10 { + compatible = "maxim,max98091"; + reg = <0x10>; + interrupts = <2 0>; + interrupt-parent = <&gpx0>; + pinctrl-names = "default"; + pinctrl-0 = <&max98091_irq>; }; +}; - usb301_vbus_en: usb301-vbus-en { - samsung,pins = "gph0-1"; - samsung,pin-function = <1>; - samsung,pin-pud = <0>; - samsung,pin-drv = <0>; +&hsi2c_9 { + status = "okay"; + clock-frequency = <400000>; + + tpm@20 { + compatible = "infineon,slb9645tt"; + reg = <0x20>; + + /* Unused irq; but still need to configure the pins */ + pinctrl-names = "default"; + pinctrl-0 = <&tpm_irq>; }; }; -&rtc { +&i2c_2 { status = "okay"; + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <66000>; + samsung,i2c-slave-addr = <0x50>; }; -&uart_3 { +&i2s0 { status = "okay"; }; @@ -173,66 +219,210 @@ slot@0 { }; }; -&dp { - status = "okay"; + +&pinctrl_0 { pinctrl-names = "default"; - pinctrl-0 = <&dp_hpd_gpio>; - samsung,color-space = <0>; - samsung,dynamic-range = <0>; - samsung,ycbcr-coeff = <0>; - samsung,color-depth = <1>; - samsung,link-rate = <0x0a>; - samsung,lane-count = <2>; - samsung,hpd-gpio = <&gpx2 6 0>; + pinctrl-0 = <&mask_tpm_reset>; - display-timings { - native-mode = <&timing1>; + max98091_irq: max98091-irq { + samsung,pins = "gpx0-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; - timing1: timing@1 { - clock-frequency = <150660000>; - hactive = <1920>; - vactive = <1080>; - hfront-porch = <60>; - hback-porch = <172>; - hsync-len = <80>; - vback-porch = <25>; - vfront-porch = <10>; - vsync-len = <10>; - }; + /* We need GPX0_6 to be low at sleep time; just keep it low always */ + mask_tpm_reset: mask-tpm-reset { + samsung,pins = "gpx0-6"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + samsung,pin-val = <0>; }; -}; -&fimd { - status = "okay"; - samsung,invert-vclk; + tpm_irq: tpm-irq { + samsung,pins = "gpx1-0"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + power_key_irq: power-key-irq { + samsung,pins = "gpx1-2"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ec_irq: ec-irq { + samsung,pins = "gpx1-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + tps65090_irq: tps65090-irq { + samsung,pins = "gpx2-5"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + dp_hpd_gpio: dp_hpd_gpio { + samsung,pins = "gpx2-6"; + samsung,pin-function = <0>; + samsung,pin-pud = <3>; + samsung,pin-drv = <0>; + }; + + hdmi_hpd_irq: hdmi-hpd-irq { + samsung,pins = "gpx3-7"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; }; -&hsi2c_9 { - status = "okay"; - clock-frequency = <400000>; +&pinctrl_3 { + /* Drive SPI lines at x2 for better integrity */ + spi2-bus { + samsung,pin-drv = <2>; + }; - tpm@20 { - compatible = "infineon,slb9645tt"; - reg = <0x20>; - /* Unused irq; but still need to configure the pins */ - pinctrl-names = "default"; - pinctrl-0 = <&tpm_irq>; + /* Drive SPI chip select at x2 for better integrity */ + ec_spi_cs: ec-spi-cs { + samsung,pins = "gpb1-2"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <2>; + }; + + usb300_vbus_en: usb300-vbus-en { + samsung,pins = "gph0-0"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + usb301_vbus_en: usb301-vbus-en { + samsung,pins = "gph0-1"; + samsung,pin-function = <1>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; }; }; -&i2c_2 { +&rtc { status = "okay"; - samsung,i2c-sda-delay = <100>; - samsung,i2c-max-bus-freq = <66000>; - samsung,i2c-slave-addr = <0x50>; }; -&hdmi { +&spi_2 { + status = "okay"; + num-cs = <1>; + samsung,spi-src-clk = <0>; + cs-gpios = <&gpb1 2 0>; + + cros_ec: cros-ec@0 { + compatible = "google,cros-ec-spi"; + interrupt-parent = <&gpx1>; + interrupts = <5 0>; + pinctrl-names = "default"; + pinctrl-0 = <&ec_spi_cs &ec_irq>; + reg = <0>; + spi-max-frequency = <3125000>; + + controller-data { + samsung,spi-feedback-delay = <1>; + }; + + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + google,remote-bus = <0>; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,poll-retry-count = <1>; + sbs,i2c-retry-count = <2>; + }; + + power-regulator@48 { + compatible = "ti,tps65090"; + reg = <0x48>; + + /* + * Config irq to disable internal pulls + * even though we run in polling mode. + */ + pinctrl-names = "default"; + pinctrl-0 = <&tps65090_irq>; + + vsys1-supply = <&vbat>; + vsys2-supply = <&vbat>; + vsys3-supply = <&vbat>; + infet1-supply = <&vbat>; + infet2-supply = <&vbat>; + infet3-supply = <&vbat>; + infet4-supply = <&vbat>; + infet5-supply = <&vbat>; + infet6-supply = <&vbat>; + infet7-supply = <&vbat>; + vsys-l1-supply = <&vbat>; + vsys-l2-supply = <&vbat>; + + regulators { + tps65090_dcdc1: dcdc1 { + ti,enable-ext-control; + }; + tps65090_dcdc2: dcdc2 { + ti,enable-ext-control; + }; + tps65090_dcdc3: dcdc3 { + ti,enable-ext-control; + }; + tps65090_fet1: fet1 { + regulator-name = "vcd_led"; + }; + tps65090_fet2: fet2 { + regulator-name = "video_mid"; + regulator-always-on; + }; + tps65090_fet3: fet3 { + regulator-name = "wwan_r"; + regulator-always-on; + }; + tps65090_fet4: fet4 { + regulator-name = "sdcard"; + regulator-always-on; + }; + tps65090_fet5: fet5 { + regulator-name = "camout"; + }; + tps65090_fet6: fet6 { + regulator-name = "lcd_vdd"; + }; + tps65090_fet7: fet7 { + regulator-name = "video_mid_1a"; + regulator-always-on; + }; + tps65090_ldo1: ldo1 { + }; + tps65090_ldo2: ldo2 { + }; + }; + + charger { + compatible = "ti,tps65090-charger"; + }; + }; + }; + }; +}; + +&uart_3 { status = "okay"; - hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>; - pinctrl-names = "default"; - pinctrl-0 = <&hdmi_hpd_irq>; - ddc = <&i2c_2>; }; &usbdrd_phy0 { @@ -251,3 +441,5 @@ &usbdrd_phy1 { &watchdog { timeout-sec = <32>; }; + +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/ge863-pro3.dtsi b/arch/arm/boot/dts/ge863-pro3.dtsi index 230099bb31c8686e3d2cb7037fe5c9850561d969..0d0e62489d9379587b0a7aea6a4c12982601da4a 100644 --- a/arch/arm/boot/dts/ge863-pro3.dtsi +++ b/arch/arm/boot/dts/ge863-pro3.dtsi @@ -19,6 +19,10 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <6000000>; }; + + main_xtal { + clock-frequency = <6000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi index 83a5b8685bd961818bfa8c9d6bea6bc3bff4ff24..6cbb62e5c6a9eb0c98042aaec8495e72c4e28640 100644 --- a/arch/arm/boot/dts/hi3620.dtsi +++ b/arch/arm/boot/dts/hi3620.dtsi @@ -33,6 +33,7 @@ pclk: clk { cpus { #address-cells = <1>; #size-cells = <0>; + enable-method = "hisilicon,hi3620-smp"; cpu@0 { device_type = "cpu"; diff --git a/arch/arm/boot/dts/hisi-x5hd2-dkb.dts b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts new file mode 100644 index 0000000000000000000000000000000000000000..05b44c272c9a7b11cd05f64ac1879dc128fe035d --- /dev/null +++ b/arch/arm/boot/dts/hisi-x5hd2-dkb.dts @@ -0,0 +1,53 @@ +/* + * Copyright (c) 2013-2014 Linaro Ltd. + * Copyright (c) 2013-2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +/dts-v1/; +#include "hisi-x5hd2.dtsi" + +/ { + model = "Hisilicon HIX5HD2 Development Board"; + compatible = "hisilicon,hix5hd2"; + + chosen { + bootargs = "console=ttyAMA0,115200 earlyprintk"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + enable-method = "hisilicon,hix5hd2-smp"; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&l2>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + next-level-cache = <&l2>; + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x80000000>; + }; +}; + +&timer0 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/hisi-x5hd2.dtsi b/arch/arm/boot/dts/hisi-x5hd2.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..f85ba2924ff7ef01b08703a2ece00ffbe5382452 --- /dev/null +++ b/arch/arm/boot/dts/hisi-x5hd2.dtsi @@ -0,0 +1,170 @@ +/* + * Copyright (c) 2013-2014 Linaro Ltd. + * Copyright (c) 2013-2014 Hisilicon Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * publishhed by the Free Software Foundation. + */ + +#include "skeleton.dtsi" +#include + +/ { + aliases { + serial0 = &uart0; + }; + + gic: interrupt-controller@f8a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + /* gic dist base, gic cpu base */ + reg = <0xf8a01000 0x1000>, <0xf8a00100 0x100>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges = <0 0xf8000000 0x8000000>; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + ranges; + + timer0: timer@00002000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00002000 0x1000>; + /* timer00 & timer01 */ + interrupts = <0 24 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer1: timer@00a29000 { + /* + * Only used in NORMAL state, not available ins + * SLOW or DOZE state. + * The rate is fixed in 24MHz. + */ + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a29000 0x1000>; + /* timer10 & timer11 */ + interrupts = <0 25 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer2: timer@00a2a000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a2a000 0x1000>; + /* timer20 & timer21 */ + interrupts = <0 26 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer3: timer@00a2b000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a2b000 0x1000>; + /* timer30 & timer31 */ + interrupts = <0 27 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + timer4: timer@00a81000 { + compatible = "arm,sp804", "arm,primecell"; + reg = <0x00a81000 0x1000>; + /* timer30 & timer31 */ + interrupts = <0 28 4>; + clocks = <&clock HIX5HD2_FIXED_24M>; + status = "disabled"; + }; + + uart0: uart@00b00000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00b00000 0x1000>; + interrupts = <0 49 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart1: uart@00006000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00006000 0x1000>; + interrupts = <0 50 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart2: uart@00b02000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00b02000 0x1000>; + interrupts = <0 51 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart3: uart@00b03000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x00b03000 0x1000>; + interrupts = <0 52 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + uart4: uart@00b04000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xb04000 0x1000>; + interrupts = <0 53 4>; + clocks = <&clock HIX5HD2_FIXED_83M>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + }; + + local_timer@00a00600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x00a00600 0x20>; + interrupts = <1 13 0xf01>; + }; + + l2: l2-cache { + compatible = "arm,pl310-cache"; + reg = <0x00a10000 0x100000>; + interrupts = <0 15 4>; + cache-unified; + cache-level = <2>; + }; + + sysctrl: system-controller@00000000 { + compatible = "hisilicon,sysctrl"; + reg = <0x00000000 0x1000>; + reboot-offset = <0x4>; + }; + + cpuctrl@00a22000 { + compatible = "hisilicon,cpuctrl"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x00a22000 0x2000>; + ranges = <0 0x00a22000 0x2000>; + + clock: clock@0 { + compatible = "hisilicon,hix5hd2-clock"; + reg = <0 0x2000>; + #clock-cells = <1>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts new file mode 100644 index 0000000000000000000000000000000000000000..68d0834a2d1eb6f43709d65cb7bc8b16d0fbba14 --- /dev/null +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts @@ -0,0 +1,73 @@ +/* + * Copyright 2013 Eukréa Electromatique + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "imx25-eukrea-mbimxsd25-baseboard.dts" + +/ { + model = "Eukrea MBIMXSD25 with the CMO-QVGA Display"; + compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25"; + + cmo_qvga: display { + model = "CMO-QVGA"; + bits-per-pixel = <16>; + fsl,pcr = <0xcad08b80>; + bus-width = <18>; + native-mode = <&qvga_timings>; + display-timings { + qvga_timings: 320x240 { + clock-frequency = <6500000>; + hactive = <320>; + vactive = <240>; + hback-porch = <30>; + hfront-porch = <38>; + vback-porch = <20>; + vfront-porch = <3>; + hsync-len = <15>; + vsync-len = <4>; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_lcd_3v3: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_lcd_3v3>; + regulator-name = "lcd-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&iomuxc { + imx25-eukrea-mbimxsd25-baseboard-cmo-qvga { + pinctrl_reg_lcd_3v3: reg_lcd_3v3 { + fsl,pins = ; + }; + }; +}; + +&lcdc { + display = <&cmo_qvga>; + fsl,lpccr = <0x00a903ff>; + lcd-supply = <®_lcd_3v3>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts new file mode 100644 index 0000000000000000000000000000000000000000..8eee2f65fe003a083caf0e16438216802dcfa8d5 --- /dev/null +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts @@ -0,0 +1,45 @@ +/* + * Copyright 2013 Eukréa Electromatique + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "imx25-eukrea-mbimxsd25-baseboard.dts" + +/ { + model = "Eukrea MBIMXSD25 with the DVI-SVGA Display"; + compatible = "eukrea,mbimxsd25-baseboard-dvi-svga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25"; + + dvi_svga: display { + model = "DVI-SVGA"; + bits-per-pixel = <16>; + fsl,pcr = <0xfa208b80>; + bus-width = <18>; + native-mode = <&dvi_svga_timings>; + display-timings { + dvi_svga_timings: 800x600 { + clock-frequency = <40000000>; + hactive = <800>; + vactive = <600>; + hback-porch = <75>; + hfront-porch = <75>; + vback-porch = <7>; + vfront-porch = <75>; + hsync-len = <7>; + vsync-len = <7>; + }; + }; + }; +}; + +&lcdc { + display = <&dvi_svga>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts new file mode 100644 index 0000000000000000000000000000000000000000..447da62631696f33a58b1a3a9b319ef8bbcca6e6 --- /dev/null +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts @@ -0,0 +1,45 @@ +/* + * Copyright 2013 Eukréa Electromatique + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "imx25-eukrea-mbimxsd25-baseboard.dts" + +/ { + model = "Eukrea MBIMXSD25 with the DVI-VGA Display"; + compatible = "eukrea,mbimxsd25-baseboard-dvi-vga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25"; + + dvi_vga: display { + model = "DVI-VGA"; + bits-per-pixel = <16>; + fsl,pcr = <0xfa208b80>; + bus-width = <18>; + native-mode = <&dvi_vga_timings>; + display-timings { + dvi_vga_timings: 640x480 { + clock-frequency = <31250000>; + hactive = <640>; + vactive = <480>; + hback-porch = <100>; + hfront-porch = <100>; + vback-porch = <7>; + vfront-porch = <100>; + hsync-len = <7>; + vsync-len = <7>; + }; + }; + }; +}; + +&lcdc { + display = <&dvi_vga>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts index ad12da38fc922874823828e3369b64b7d1ad9474..ed1d0b4578ef99402f22941b818451ac366518cf 100644 --- a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts +++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts @@ -155,7 +155,6 @@ MX25_PAD_UART2_CTS__UART2_CTS 0x80000000 &ssi1 { codec-handle = <&tlv320aic23>; - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx25-pdk.dts b/arch/arm/boot/dts/imx25-pdk.dts index c608942b8a3b65605ac8156fb9e9fe511b5c2792..9c21b15837627fcf2a98032183d77e2a8be153db 100644 --- a/arch/arm/boot/dts/imx25-pdk.dts +++ b/arch/arm/boot/dts/imx25-pdk.dts @@ -233,7 +233,6 @@ MATRIX_KEY(0x3, 0x2, KEY_POWER) &ssi1 { codec-handle = <&codec>; - fsl,mode = "i2s-slave"; status = "okay"; }; @@ -249,3 +248,10 @@ &usbhost1 { dr_mode = "host"; status = "okay"; }; + +&usbotg { + phy_type = "utmi"; + dr_mode = "otg"; + external-vbus-divider; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx25.dtsi b/arch/arm/boot/dts/imx25.dtsi index bb74d9582b7e2e0627acf7f3a9adb75bc299f9f5..c1740396b2c95ef8f0860ae5c4ce5c829a22ecab 100644 --- a/arch/arm/boot/dts/imx25.dtsi +++ b/arch/arm/boot/dts/imx25.dtsi @@ -312,7 +312,7 @@ clks: ccm@53f80000 { gpt4: timer@53f84000 { compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; reg = <0x53f84000 0x4000>; - clocks = <&clks 9>, <&clks 45>; + clocks = <&clks 95>, <&clks 47>; clock-names = "ipg", "per"; interrupts = <1>; }; @@ -320,7 +320,7 @@ gpt4: timer@53f84000 { gpt3: timer@53f88000 { compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; reg = <0x53f88000 0x4000>; - clocks = <&clks 9>, <&clks 47>; + clocks = <&clks 94>, <&clks 47>; clock-names = "ipg", "per"; interrupts = <29>; }; @@ -328,7 +328,7 @@ gpt3: timer@53f88000 { gpt2: timer@53f8c000 { compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; reg = <0x53f8c000 0x4000>; - clocks = <&clks 9>, <&clks 47>; + clocks = <&clks 93>, <&clks 47>; clock-names = "ipg", "per"; interrupts = <53>; }; @@ -336,7 +336,7 @@ gpt2: timer@53f8c000 { gpt1: timer@53f90000 { compatible = "fsl,imx25-gpt", "fsl,imx31-gpt"; reg = <0x53f90000 0x4000>; - clocks = <&clks 9>, <&clks 47>; + clocks = <&clks 92>, <&clks 47>; clock-names = "ipg", "per"; interrupts = <54>; }; diff --git a/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..e2242638ea0b12808e6caf25077ddbb193c532fe --- /dev/null +++ b/arch/arm/boot/dts/imx27-eukrea-cpuimx27.dtsi @@ -0,0 +1,296 @@ +/* + * Copyright (C) 2014 Alexander Shiyan + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx27.dtsi" + +/ { + model = "Eukrea CPUIMX27"; + compatible = "eukrea,cpuimx27", "fsl,imx27"; + + memory { + reg = <0xa0000000 0x04000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; + + clk14745600: clock@0 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <14745600>; + reg = <0>; + }; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec>; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pcf8563@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nfc>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + nand-on-flash-bbt; + status = "okay"; +}; + +&owire { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_owire>; + status = "okay"; +}; + +&sdhci2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhc2>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh2>; + dr_mode = "host"; + phy_type = "ulpi"; + disable-over-current; + status = "okay"; +}; + +&usbotg { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "otg"; + phy_type = "ulpi"; + disable-over-current; + status = "okay"; +}; + +&weim { + status = "okay"; + + nor: nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0x00000000 0x04000000>; + bank-width = <2>; + linux,mtd-name = "physmap-flash.0"; + fsl,weim-cs-timing = <0x00008f03 0xa0330d01 0x002208c0>; + }; + + uart8250@3,200000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8250_1>; + compatible = "ns8250"; + clocks = <&clk14745600>; + fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>; + interrupts = <&gpio2 23 IRQ_TYPE_LEVEL_LOW>; + reg = <3 0x200000 0x1000>; + reg-shift = <1>; + reg-io-width = <1>; + no-loopback-test; + }; + + uart8250@3,400000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8250_2>; + compatible = "ns8250"; + clocks = <&clk14745600>; + fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>; + interrupts = <&gpio2 22 IRQ_TYPE_LEVEL_LOW>; + reg = <3 0x400000 0x1000>; + reg-shift = <1>; + reg-io-width = <1>; + no-loopback-test; + }; + + uart8250@3,800000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8250_3>; + compatible = "ns8250"; + clocks = <&clk14745600>; + fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>; + interrupts = <&gpio2 27 IRQ_TYPE_LEVEL_LOW>; + reg = <3 0x800000 0x1000>; + reg-shift = <1>; + reg-io-width = <1>; + no-loopback-test; + }; + + uart8250@3,1000000 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart8250_4>; + compatible = "ns8250"; + clocks = <&clk14745600>; + fsl,weim-cs-timing = <0x0000d603 0x0d1d0d01 0x00d20000>; + interrupts = <&gpio2 30 IRQ_TYPE_LEVEL_LOW>; + reg = <3 0x1000000 0x1000>; + reg-shift = <1>; + reg-io-width = <1>; + no-loopback-test; + }; +}; + +&iomuxc { + imx27-eukrea-cpuimx27 { + pinctrl_fec: fecgrp { + fsl,pins = < + MX27_PAD_SD3_CMD__FEC_TXD0 0x0 + MX27_PAD_SD3_CLK__FEC_TXD1 0x0 + MX27_PAD_ATA_DATA0__FEC_TXD2 0x0 + MX27_PAD_ATA_DATA1__FEC_TXD3 0x0 + MX27_PAD_ATA_DATA2__FEC_RX_ER 0x0 + MX27_PAD_ATA_DATA3__FEC_RXD1 0x0 + MX27_PAD_ATA_DATA4__FEC_RXD2 0x0 + MX27_PAD_ATA_DATA5__FEC_RXD3 0x0 + MX27_PAD_ATA_DATA6__FEC_MDIO 0x0 + MX27_PAD_ATA_DATA7__FEC_MDC 0x0 + MX27_PAD_ATA_DATA8__FEC_CRS 0x0 + MX27_PAD_ATA_DATA9__FEC_TX_CLK 0x0 + MX27_PAD_ATA_DATA10__FEC_RXD0 0x0 + MX27_PAD_ATA_DATA11__FEC_RX_DV 0x0 + MX27_PAD_ATA_DATA12__FEC_RX_CLK 0x0 + MX27_PAD_ATA_DATA13__FEC_COL 0x0 + MX27_PAD_ATA_DATA14__FEC_TX_ER 0x0 + MX27_PAD_ATA_DATA15__FEC_TX_EN 0x0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX27_PAD_I2C_DATA__I2C_DATA 0x0 + MX27_PAD_I2C_CLK__I2C_CLK 0x0 + >; + }; + + pinctrl_nfc: nfcgrp { + fsl,pins = < + MX27_PAD_NFRB__NFRB 0x0 + MX27_PAD_NFCLE__NFCLE 0x0 + MX27_PAD_NFWP_B__NFWP_B 0x0 + MX27_PAD_NFCE_B__NFCE_B 0x0 + MX27_PAD_NFALE__NFALE 0x0 + MX27_PAD_NFRE_B__NFRE_B 0x0 + MX27_PAD_NFWE_B__NFWE_B 0x0 + >; + }; + + pinctrl_owire: owiregrp { + fsl,pins = < + MX27_PAD_RTCK__OWIRE 0x0 + >; + }; + + pinctrl_sdhc2: sdhc2grp { + fsl,pins = < + MX27_PAD_SD2_CLK__SD2_CLK 0x0 + MX27_PAD_SD2_CMD__SD2_CMD 0x0 + MX27_PAD_SD2_D0__SD2_D0 0x0 + MX27_PAD_SD2_D1__SD2_D1 0x0 + MX27_PAD_SD2_D2__SD2_D2 0x0 + MX27_PAD_SD2_D3__SD2_D3 0x0 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX27_PAD_USBH1_TXDM__UART4_TXD 0x0 + MX27_PAD_USBH1_RXDP__UART4_RXD 0x0 + MX27_PAD_USBH1_TXDP__UART4_CTS 0x0 + MX27_PAD_USBH1_FS__UART4_RTS 0x0 + >; + }; + + pinctrl_uart8250_1: uart82501grp { + fsl,pins = < + MX27_PAD_USB_PWR__GPIO2_23 0x0 + >; + }; + + pinctrl_uart8250_2: uart82502grp { + fsl,pins = < + MX27_PAD_USBH1_SUSP__GPIO2_22 0x0 + >; + }; + + pinctrl_uart8250_3: uart82503grp { + fsl,pins = < + MX27_PAD_USBH1_OE_B__GPIO2_27 0x0 + >; + }; + + pinctrl_uart8250_4: uart82504grp { + fsl,pins = < + MX27_PAD_USBH1_RXDM__GPIO2_30 0x0 + >; + }; + + pinctrl_usbh2: usbh2grp { + fsl,pins = < + MX27_PAD_USBH2_CLK__USBH2_CLK 0x0 + MX27_PAD_USBH2_DIR__USBH2_DIR 0x0 + MX27_PAD_USBH2_NXT__USBH2_NXT 0x0 + MX27_PAD_USBH2_STP__USBH2_STP 0x0 + MX27_PAD_CSPI2_SCLK__USBH2_DATA0 0x0 + MX27_PAD_CSPI2_MOSI__USBH2_DATA1 0x0 + MX27_PAD_CSPI2_MISO__USBH2_DATA2 0x0 + MX27_PAD_CSPI2_SS1__USBH2_DATA3 0x0 + MX27_PAD_CSPI2_SS2__USBH2_DATA4 0x0 + MX27_PAD_CSPI1_SS2__USBH2_DATA5 0x0 + MX27_PAD_CSPI2_SS0__USBH2_DATA6 0x0 + MX27_PAD_USBH2_DATA7__USBH2_DATA7 0x0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX27_PAD_USBOTG_CLK__USBOTG_CLK 0x0 + MX27_PAD_USBOTG_DIR__USBOTG_DIR 0x0 + MX27_PAD_USBOTG_NXT__USBOTG_NXT 0x0 + MX27_PAD_USBOTG_STP__USBOTG_STP 0x0 + MX27_PAD_USBOTG_DATA0__USBOTG_DATA0 0x0 + MX27_PAD_USBOTG_DATA1__USBOTG_DATA1 0x0 + MX27_PAD_USBOTG_DATA2__USBOTG_DATA2 0x0 + MX27_PAD_USBOTG_DATA3__USBOTG_DATA3 0x0 + MX27_PAD_USBOTG_DATA4__USBOTG_DATA4 0x0 + MX27_PAD_USBOTG_DATA5__USBOTG_DATA5 0x0 + MX27_PAD_USBOTG_DATA6__USBOTG_DATA6 0x0 + MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts new file mode 100644 index 0000000000000000000000000000000000000000..2ab65fc4c1e1a8fd615655d1bc067a8b0b76b5ac --- /dev/null +++ b/arch/arm/boot/dts/imx27-eukrea-mbimxsd27-baseboard.dts @@ -0,0 +1,273 @@ +/* + * Copyright (C) 2014 Alexander Shiyan + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx27-eukrea-cpuimx27.dtsi" + +/ { + model = "Eukrea MBIMXSD27"; + compatible = "eukrea,mbimxsd27-baseboard", "eukrea,cpuimx27", "fsl,imx27"; + + display0: CMO-QVGA { + model = "CMO-QVGA"; + native-mode = <&timing0>; + bits-per-pixel = <16>; + fsl,pcr = <0xfad08b80>; + + display-timings { + timing0: 320x240 { + clock-frequency = <6500000>; + hactive = <320>; + vactive = <240>; + hback-porch = <20>; + hsync-len = <30>; + hfront-porch = <38>; + vback-porch = <4>; + vsync-len = <3>; + vfront-porch = <15>; + }; + }; + }; + + backlight { + compatible = "gpio-backlight"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpioleds>; + + led1 { + label = "system::live"; + gpios = <&gpio6 16 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "system::user"; + gpios = <&gpio6 19 GPIO_ACTIVE_LOW>; + }; + }; + + regulators { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-bus"; + + reg_lcd: regulator@0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcdreg>; + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "LCD"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 25 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; +}; + +&cspi1 { + pinctrl-0 = <&pinctrl_cspi1>; + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>; + status = "okay"; + + ads7846 { + compatible = "ti,ads7846"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_touch>; + reg = <0>; + interrupts = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>; + spi-cpol; + spi-max-frequency = <1500000>; + ti,keep-vref-on; + }; +}; + +&fb { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_imxfb>; + display = <&display0>; + lcd-supply = <®_lcd>; + fsl,dmacr = <0x00040060>; + fsl,lscr1 = <0x00120300>; + fsl,lpccr = <0x00a903ff>; + status = "okay"; +}; + +&i2c1 { + codec: codec@1a { + compatible = "ti,tlv320aic23"; + reg = <0x1a>; + }; +}; + +&kpp { + linux,keymap = < + MATRIX_KEY(0, 0, KEY_UP) + MATRIX_KEY(0, 1, KEY_DOWN) + MATRIX_KEY(1, 0, KEY_RIGHT) + MATRIX_KEY(1, 1, KEY_LEFT) + >; + status = "okay"; +}; + +&sdhci1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&ssi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ssi1>; + codec-handle = <&codec>; + status = "okay"; +}; + +&uart1 { + fsl,uart-has-rtscts; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + fsl,uart-has-rtscts; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&uart3 { + fsl,uart-has-rtscts; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; + status = "okay"; +}; + +&iomuxc { + imx27-eukrea-cpuimx27-baseboard { + pinctrl_cspi1: cspi1grp { + fsl,pins = < + MX27_PAD_CSPI1_MISO__CSPI1_MISO 0x0 + MX27_PAD_CSPI1_MOSI__CSPI1_MOSI 0x0 + MX27_PAD_CSPI1_SCLK__CSPI1_SCLK 0x0 + MX27_PAD_CSPI1_SS0__GPIO4_28 0x0 /* CS0 */ + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX27_PAD_PWMO__GPIO5_5 0x0 + >; + }; + + pinctrl_gpioleds: gpioledsgrp { + fsl,pins = < + MX27_PAD_PC_PWRON__GPIO6_16 0x0 + MX27_PAD_PC_CD2_B__GPIO6_19 0x0 + >; + }; + + pinctrl_imxfb: imxfbgrp { + fsl,pins = < + MX27_PAD_LD0__LD0 0x0 + MX27_PAD_LD1__LD1 0x0 + MX27_PAD_LD2__LD2 0x0 + MX27_PAD_LD3__LD3 0x0 + MX27_PAD_LD4__LD4 0x0 + MX27_PAD_LD5__LD5 0x0 + MX27_PAD_LD6__LD6 0x0 + MX27_PAD_LD7__LD7 0x0 + MX27_PAD_LD8__LD8 0x0 + MX27_PAD_LD9__LD9 0x0 + MX27_PAD_LD10__LD10 0x0 + MX27_PAD_LD11__LD11 0x0 + MX27_PAD_LD12__LD12 0x0 + MX27_PAD_LD13__LD13 0x0 + MX27_PAD_LD14__LD14 0x0 + MX27_PAD_LD15__LD15 0x0 + MX27_PAD_LD16__LD16 0x0 + MX27_PAD_LD17__LD17 0x0 + MX27_PAD_CONTRAST__CONTRAST 0x0 + MX27_PAD_OE_ACD__OE_ACD 0x0 + MX27_PAD_HSYNC__HSYNC 0x0 + MX27_PAD_VSYNC__VSYNC 0x0 + >; + }; + + pinctrl_lcdreg: lcdreggrp { + fsl,pins = < + MX27_PAD_CLS__GPIO1_25 0x0 + >; + }; + + pinctrl_sdhc1: sdhc1grp { + fsl,pins = < + MX27_PAD_SD1_CLK__SD1_CLK 0x0 + MX27_PAD_SD1_CMD__SD1_CMD 0x0 + MX27_PAD_SD1_D0__SD1_D0 0x0 + MX27_PAD_SD1_D1__SD1_D1 0x0 + MX27_PAD_SD1_D2__SD1_D2 0x0 + MX27_PAD_SD1_D3__SD1_D3 0x0 + >; + }; + + pinctrl_ssi1: ssi1grp { + fsl,pins = < + MX27_PAD_SSI4_CLK__SSI4_CLK 0x0 + MX27_PAD_SSI4_FS__SSI4_FS 0x0 + MX27_PAD_SSI4_RXDAT__SSI4_RXDAT 0x1 + MX27_PAD_SSI4_TXDAT__SSI4_TXDAT 0x1 + >; + }; + + pinctrl_touch: touchgrp { + fsl,pins = < + MX27_PAD_CSPI1_RDY__GPIO4_25 0x0 /* IRQ */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX27_PAD_UART1_TXD__UART1_TXD 0x0 + MX27_PAD_UART1_RXD__UART1_RXD 0x0 + MX27_PAD_UART1_CTS__UART1_CTS 0x0 + MX27_PAD_UART1_RTS__UART1_RTS 0x0 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX27_PAD_UART2_TXD__UART2_TXD 0x0 + MX27_PAD_UART2_RXD__UART2_RXD 0x0 + MX27_PAD_UART2_CTS__UART2_CTS 0x0 + MX27_PAD_UART2_RTS__UART2_RTS 0x0 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX27_PAD_UART3_TXD__UART3_TXD 0x0 + MX27_PAD_UART3_RXD__UART3_RXD 0x0 + MX27_PAD_UART3_CTS__UART3_CTS 0x0 + MX27_PAD_UART3_RTS__UART3_RTS 0x0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx27-pdk.dts b/arch/arm/boot/dts/imx27-pdk.dts index 4c317716b510ab4db06a183bbf7567745be9d5c8..49450dbbcab8ca7057321f3f87665a8209240346 100644 --- a/arch/arm/boot/dts/imx27-pdk.dts +++ b/arch/arm/boot/dts/imx27-pdk.dts @@ -28,7 +28,7 @@ usbphy { usbphy0: usbphy@0 { compatible = "usb-nop-xceiv"; reg = <0>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts index fe02bc7a24fd0df59fe14264ab0228d3a11f9661..538568b0de263eb979509f6a17d77eb38906d831 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts +++ b/arch/arm/boot/dts/imx27-phytec-phycore-rdk.dts @@ -61,7 +61,7 @@ usbphy2: usbphy@2 { compatible = "usb-nop-xceiv"; reg = <2>; vcc-supply = <®_5v0>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; }; }; diff --git a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi index 31e9f7049f73351f325c3e58b1fb6e4e116763df..b4e955e3be8d26deae9a68364b2952b7fccd8f71 100644 --- a/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi +++ b/arch/arm/boot/dts/imx27-phytec-phycore-som.dtsi @@ -51,7 +51,7 @@ usbphy0: usbphy@0 { compatible = "usb-nop-xceiv"; reg = <0>; vcc-supply = <&sw3_reg>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "main_clk"; }; }; @@ -310,7 +310,6 @@ &nfc { &ssi1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ssi1>; - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx27-pinfunc.h b/arch/arm/boot/dts/imx27-pinfunc.h index f5387b4de577ba1b0c73cb85ebeaa6177d685504..597bb5f74dcc5ecccaa664274f672d8608297dac 100644 --- a/arch/arm/boot/dts/imx27-pinfunc.h +++ b/arch/arm/boot/dts/imx27-pinfunc.h @@ -101,14 +101,6 @@ #define MX27_PAD_CONTRAST__GPIO1_30 0x1e 0x032 #define MX27_PAD_OE_ACD__OE_ACD 0x1f 0x004 #define MX27_PAD_OE_ACD__GPIO1_31 0x1f 0x032 -#define MX27_PAD_UNUSED0__UNUSED0 0x20 0x004 -#define MX27_PAD_UNUSED0__GPIO2_0 0x20 0x032 -#define MX27_PAD_UNUSED1__UNUSED1 0x21 0x004 -#define MX27_PAD_UNUSED1__GPIO2_1 0x21 0x032 -#define MX27_PAD_UNUSED2__UNUSED2 0x22 0x004 -#define MX27_PAD_UNUSED2__GPIO2_2 0x22 0x032 -#define MX27_PAD_UNUSED3__UNUSED3 0x23 0x004 -#define MX27_PAD_UNUSED3__GPIO2_3 0x23 0x032 #define MX27_PAD_SD2_D0__SD2_D0 0x24 0x004 #define MX27_PAD_SD2_D0__MSHC_DATA0 0x24 0x005 #define MX27_PAD_SD2_D0__GPIO2_4 0x24 0x032 @@ -183,16 +175,6 @@ #define MX27_PAD_USBH1_RXDP__USBH1_RXDP 0x3f 0x004 #define MX27_PAD_USBH1_RXDP__UART4_RXD 0x3f 0x001 #define MX27_PAD_USBH1_RXDP__GPIO2_31 0x3f 0x032 -#define MX27_PAD_UNUSED4__UNUSED4 0x40 0x004 -#define MX27_PAD_UNUSED4__GPIO3_0 0x40 0x032 -#define MX27_PAD_UNUSED5__UNUSED5 0x41 0x004 -#define MX27_PAD_UNUSED5__GPIO3_1 0x41 0x032 -#define MX27_PAD_UNUSED6__UNUSED6 0x42 0x004 -#define MX27_PAD_UNUSED6__GPIO3_2 0x42 0x032 -#define MX27_PAD_UNUSED7__UNUSED7 0x43 0x004 -#define MX27_PAD_UNUSED7__GPIO3_3 0x43 0x032 -#define MX27_PAD_UNUSED8__UNUSED8 0x44 0x004 -#define MX27_PAD_UNUSED8__GPIO3_4 0x44 0x032 #define MX27_PAD_I2C2_SDA__I2C2_SDA 0x45 0x004 #define MX27_PAD_I2C2_SDA__GPIO3_5 0x45 0x032 #define MX27_PAD_I2C2_SCL__I2C2_SCL 0x46 0x004 @@ -422,18 +404,6 @@ #define MX27_PAD_USBOTG_CLK__GPIO5_24 0x98 0x032 #define MX27_PAD_USBOTG_DATA7__USBOTG_DATA7 0x99 0x004 #define MX27_PAD_USBOTG_DATA7__GPIO5_25 0x99 0x032 -#define MX27_PAD_UNUSED9__UNUSED9 0x9a 0x004 -#define MX27_PAD_UNUSED9__GPIO5_26 0x9a 0x032 -#define MX27_PAD_UNUSED10__UNUSED10 0x9b 0x004 -#define MX27_PAD_UNUSED10__GPIO5_27 0x9b 0x032 -#define MX27_PAD_UNUSED11__UNUSED11 0x9c 0x004 -#define MX27_PAD_UNUSED11__GPIO5_28 0x9c 0x032 -#define MX27_PAD_UNUSED12__UNUSED12 0x9d 0x004 -#define MX27_PAD_UNUSED12__GPIO5_29 0x9d 0x032 -#define MX27_PAD_UNUSED13__UNUSED13 0x9e 0x004 -#define MX27_PAD_UNUSED13__GPIO5_30 0x9e 0x032 -#define MX27_PAD_UNUSED14__UNUSED14 0x9f 0x004 -#define MX27_PAD_UNUSED14__GPIO5_31 0x9f 0x032 #define MX27_PAD_NFRB__NFRB 0xa0 0x000 #define MX27_PAD_NFRB__ETMTRACEPKT3 0xa0 0x005 #define MX27_PAD_NFRB__GPIO6_0 0xa0 0x032 @@ -506,21 +476,5 @@ #define MX27_PAD_ATA_DATA15__ETMTRACEPKT4 0xb7 0x005 #define MX27_PAD_ATA_DATA15__FEC_TX_EN 0xb7 0x006 #define MX27_PAD_ATA_DATA15__GPIO6_23 0xb7 0x032 -#define MX27_PAD_UNUSED15__UNUSED15 0xb8 0x004 -#define MX27_PAD_UNUSED15__GPIO6_24 0xb8 0x032 -#define MX27_PAD_UNUSED16__UNUSED16 0xb9 0x004 -#define MX27_PAD_UNUSED16__GPIO6_25 0xb9 0x032 -#define MX27_PAD_UNUSED17__UNUSED17 0xba 0x004 -#define MX27_PAD_UNUSED17__GPIO6_26 0xba 0x032 -#define MX27_PAD_UNUSED18__UNUSED18 0xbb 0x004 -#define MX27_PAD_UNUSED18__GPIO6_27 0xbb 0x032 -#define MX27_PAD_UNUSED19__UNUSED19 0xbc 0x004 -#define MX27_PAD_UNUSED19__GPIO6_28 0xbc 0x032 -#define MX27_PAD_UNUSED20__UNUSED20 0xbd 0x004 -#define MX27_PAD_UNUSED20__GPIO6_29 0xbd 0x032 -#define MX27_PAD_UNUSED21__UNUSED21 0xbe 0x004 -#define MX27_PAD_UNUSED21__GPIO6_30 0xbe 0x032 -#define MX27_PAD_UNUSED22__UNUSED22 0xbf 0x004 -#define MX27_PAD_UNUSED22__GPIO6_31 0xbf 0x032 #endif /* __DTS_IMX27_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi index a75555c39533d71edd6828dd475ae8d73df81511..107d713e1cbecdbf63a18f9f99eafe74cee67e0e 100644 --- a/arch/arm/boot/dts/imx27.dtsi +++ b/arch/arm/boot/dts/imx27.dtsi @@ -11,9 +11,11 @@ #include "skeleton.dtsi" #include "imx27-pinfunc.h" + +#include +#include #include #include -#include / { aliases { @@ -68,7 +70,7 @@ cpu: cpu@0 { 399000 1450000 >; clock-latency = <62500>; - clocks = <&clks 18>; + clocks = <&clks IMX27_CLK_CPU_DIV>; voltage-tolerance = <5>; }; }; @@ -91,7 +93,8 @@ dma: dma@10001000 { compatible = "fsl,imx27-dma"; reg = <0x10001000 0x1000>; interrupts = <32>; - clocks = <&clks 50>, <&clks 70>; + clocks = <&clks IMX27_CLK_DMA_IPG_GATE>, + <&clks IMX27_CLK_DMA_AHB_GATE>; clock-names = "ipg", "ahb"; #dma-cells = <1>; #dma-channels = <16>; @@ -101,14 +104,15 @@ wdog: wdog@10002000 { compatible = "fsl,imx27-wdt", "fsl,imx21-wdt"; reg = <0x10002000 0x1000>; interrupts = <27>; - clocks = <&clks 74>; + clocks = <&clks IMX27_CLK_WDOG_IPG_GATE>; }; gpt1: timer@10003000 { compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x10003000 0x1000>; interrupts = <26>; - clocks = <&clks 46>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -116,7 +120,8 @@ gpt2: timer@10004000 { compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x10004000 0x1000>; interrupts = <25>; - clocks = <&clks 45>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT2_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -124,7 +129,8 @@ gpt3: timer@10005000 { compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x10005000 0x1000>; interrupts = <24>; - clocks = <&clks 44>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT3_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -133,7 +139,8 @@ pwm: pwm@10006000 { compatible = "fsl,imx27-pwm"; reg = <0x10006000 0x1000>; interrupts = <23>; - clocks = <&clks 34>, <&clks 61>; + clocks = <&clks IMX27_CLK_PWM_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -141,14 +148,14 @@ kpp: kpp@10008000 { compatible = "fsl,imx27-kpp", "fsl,imx21-kpp"; reg = <0x10008000 0x1000>; interrupts = <21>; - clocks = <&clks 37>; + clocks = <&clks IMX27_CLK_KPP_IPG_GATE>; status = "disabled"; }; owire: owire@10009000 { compatible = "fsl,imx27-owire", "fsl,imx21-owire"; reg = <0x10009000 0x1000>; - clocks = <&clks 35>; + clocks = <&clks IMX27_CLK_OWIRE_IPG_GATE>; status = "disabled"; }; @@ -156,7 +163,8 @@ uart1: serial@1000a000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000a000 0x1000>; interrupts = <20>; - clocks = <&clks 81>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART1_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -165,7 +173,8 @@ uart2: serial@1000b000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000b000 0x1000>; interrupts = <19>; - clocks = <&clks 80>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART2_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -174,7 +183,8 @@ uart3: serial@1000c000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000c000 0x1000>; interrupts = <18>; - clocks = <&clks 79>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART3_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -183,7 +193,8 @@ uart4: serial@1000d000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1000d000 0x1000>; interrupts = <17>; - clocks = <&clks 78>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART4_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -194,7 +205,8 @@ cspi1: cspi@1000e000 { compatible = "fsl,imx27-cspi"; reg = <0x1000e000 0x1000>; interrupts = <16>; - clocks = <&clks 53>, <&clks 60>; + clocks = <&clks IMX27_CLK_CSPI1_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -205,7 +217,8 @@ cspi2: cspi@1000f000 { compatible = "fsl,imx27-cspi"; reg = <0x1000f000 0x1000>; interrupts = <15>; - clocks = <&clks 52>, <&clks 60>; + clocks = <&clks IMX27_CLK_CSPI2_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -215,7 +228,7 @@ ssi1: ssi@10010000 { compatible = "fsl,imx27-ssi", "fsl,imx21-ssi"; reg = <0x10010000 0x1000>; interrupts = <14>; - clocks = <&clks 26>; + clocks = <&clks IMX27_CLK_SSI1_IPG_GATE>; dmas = <&dma 12>, <&dma 13>, <&dma 14>, <&dma 15>; dma-names = "rx0", "tx0", "rx1", "tx1"; fsl,fifo-depth = <8>; @@ -227,7 +240,7 @@ ssi2: ssi@10011000 { compatible = "fsl,imx27-ssi", "fsl,imx21-ssi"; reg = <0x10011000 0x1000>; interrupts = <13>; - clocks = <&clks 25>; + clocks = <&clks IMX27_CLK_SSI2_IPG_GATE>; dmas = <&dma 8>, <&dma 9>, <&dma 10>, <&dma 11>; dma-names = "rx0", "tx0", "rx1", "tx1"; fsl,fifo-depth = <8>; @@ -240,7 +253,7 @@ i2c1: i2c@10012000 { compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; reg = <0x10012000 0x1000>; interrupts = <12>; - clocks = <&clks 40>; + clocks = <&clks IMX27_CLK_I2C1_IPG_GATE>; status = "disabled"; }; @@ -248,7 +261,8 @@ sdhci1: sdhci@10013000 { compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x10013000 0x1000>; interrupts = <11>; - clocks = <&clks 30>, <&clks 60>; + clocks = <&clks IMX27_CLK_SDHC1_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; dmas = <&dma 7>; dma-names = "rx-tx"; @@ -259,7 +273,8 @@ sdhci2: sdhci@10014000 { compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x10014000 0x1000>; interrupts = <10>; - clocks = <&clks 29>, <&clks 60>; + clocks = <&clks IMX27_CLK_SDHC2_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; dmas = <&dma 6>; dma-names = "rx-tx"; @@ -276,6 +291,7 @@ iomuxc: iomuxc@10015000 { gpio1: gpio@10015000 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015000 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -286,6 +302,7 @@ gpio1: gpio@10015000 { gpio2: gpio@10015100 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015100 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -296,6 +313,7 @@ gpio2: gpio@10015100 { gpio3: gpio@10015200 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015200 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -306,6 +324,7 @@ gpio3: gpio@10015200 { gpio4: gpio@10015300 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015300 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -316,6 +335,7 @@ gpio4: gpio@10015300 { gpio5: gpio@10015400 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015400 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -326,6 +346,7 @@ gpio5: gpio@10015400 { gpio6: gpio@10015500 { compatible = "fsl,imx27-gpio", "fsl,imx21-gpio"; reg = <0x10015500 0x100>; + clocks = <&clks IMX27_CLK_GPIO_IPG_GATE>; interrupts = <8>; gpio-controller; #gpio-cells = <2>; @@ -337,7 +358,7 @@ gpio6: gpio@10015500 { audmux: audmux@10016000 { compatible = "fsl,imx27-audmux", "fsl,imx21-audmux"; reg = <0x10016000 0x1000>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_DUMMY>; clock-names = "audmux"; status = "disabled"; }; @@ -348,7 +369,8 @@ cspi3: cspi@10017000 { compatible = "fsl,imx27-cspi"; reg = <0x10017000 0x1000>; interrupts = <6>; - clocks = <&clks 51>, <&clks 60>; + clocks = <&clks IMX27_CLK_CSPI3_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -357,7 +379,8 @@ gpt4: timer@10019000 { compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x10019000 0x1000>; interrupts = <4>; - clocks = <&clks 43>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT4_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -365,7 +388,8 @@ gpt5: timer@1001a000 { compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x1001a000 0x1000>; interrupts = <3>; - clocks = <&clks 42>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT5_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; @@ -373,7 +397,8 @@ uart5: serial@1001b000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1001b000 0x1000>; interrupts = <49>; - clocks = <&clks 77>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART5_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -382,7 +407,8 @@ uart6: serial@1001c000 { compatible = "fsl,imx27-uart", "fsl,imx21-uart"; reg = <0x1001c000 0x1000>; interrupts = <48>; - clocks = <&clks 78>, <&clks 61>; + clocks = <&clks IMX27_CLK_UART6_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -393,7 +419,7 @@ i2c2: i2c@1001d000 { compatible = "fsl,imx27-i2c", "fsl,imx21-i2c"; reg = <0x1001d000 0x1000>; interrupts = <1>; - clocks = <&clks 39>; + clocks = <&clks IMX27_CLK_I2C2_IPG_GATE>; status = "disabled"; }; @@ -401,7 +427,8 @@ sdhci3: sdhci@1001e000 { compatible = "fsl,imx27-mmc", "fsl,imx21-mmc"; reg = <0x1001e000 0x1000>; interrupts = <9>; - clocks = <&clks 28>, <&clks 60>; + clocks = <&clks IMX27_CLK_SDHC3_IPG_GATE>, + <&clks IMX27_CLK_PER2_GATE>; clock-names = "ipg", "per"; dmas = <&dma 36>; dma-names = "rx-tx"; @@ -412,7 +439,8 @@ gpt6: timer@1001f000 { compatible = "fsl,imx27-gpt", "fsl,imx1-gpt"; reg = <0x1001f000 0x1000>; interrupts = <2>; - clocks = <&clks 41>, <&clks 61>; + clocks = <&clks IMX27_CLK_GPT6_IPG_GATE>, + <&clks IMX27_CLK_PER1_GATE>; clock-names = "ipg", "per"; }; }; @@ -428,7 +456,9 @@ fb: fb@10021000 { compatible = "fsl,imx27-fb", "fsl,imx21-fb"; interrupts = <61>; reg = <0x10021000 0x1000>; - clocks = <&clks 36>, <&clks 65>, <&clks 59>; + clocks = <&clks IMX27_CLK_LCDC_IPG_GATE>, + <&clks IMX27_CLK_LCDC_AHB_GATE>, + <&clks IMX27_CLK_PER3_GATE>; clock-names = "ipg", "ahb", "per"; status = "disabled"; }; @@ -437,7 +467,8 @@ coda: coda@10023000 { compatible = "fsl,imx27-vpu"; reg = <0x10023000 0x0200>; interrupts = <53>; - clocks = <&clks 57>, <&clks 66>; + clocks = <&clks IMX27_CLK_VPU_BAUD_GATE>, + <&clks IMX27_CLK_VPU_AHB_GATE>; clock-names = "per", "ahb"; iram = <&iram>; }; @@ -446,7 +477,7 @@ usbotg: usb@10024000 { compatible = "fsl,imx27-usb"; reg = <0x10024000 0x200>; interrupts = <56>; - clocks = <&clks 75>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 0>; status = "disabled"; }; @@ -455,7 +486,7 @@ usbh1: usb@10024200 { compatible = "fsl,imx27-usb"; reg = <0x10024200 0x200>; interrupts = <54>; - clocks = <&clks 75>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 1>; status = "disabled"; }; @@ -464,7 +495,7 @@ usbh2: usb@10024400 { compatible = "fsl,imx27-usb"; reg = <0x10024400 0x200>; interrupts = <55>; - clocks = <&clks 75>; + clocks = <&clks IMX27_CLK_USB_IPG_GATE>; fsl,usbmisc = <&usbmisc 2>; status = "disabled"; }; @@ -473,14 +504,15 @@ usbmisc: usbmisc@10024600 { #index-cells = <1>; compatible = "fsl,imx27-usbmisc"; reg = <0x10024600 0x200>; - clocks = <&clks 62>; + clocks = <&clks IMX27_CLK_USB_AHB_GATE>; }; sahara2: sahara@10025000 { compatible = "fsl,imx27-sahara"; reg = <0x10025000 0x1000>; interrupts = <59>; - clocks = <&clks 32>, <&clks 64>; + clocks = <&clks IMX27_CLK_SAHARA_IPG_GATE>, + <&clks IMX27_CLK_SAHARA_AHB_GATE>; clock-names = "ipg", "ahb"; }; @@ -494,14 +526,15 @@ iim: iim@10028000 { compatible = "fsl,imx27-iim"; reg = <0x10028000 0x1000>; interrupts = <62>; - clocks = <&clks 38>; + clocks = <&clks IMX27_CLK_IIM_IPG_GATE>; }; fec: ethernet@1002b000 { compatible = "fsl,imx27-fec"; reg = <0x1002b000 0x4000>; interrupts = <50>; - clocks = <&clks 48>, <&clks 67>; + clocks = <&clks IMX27_CLK_FEC_IPG_GATE>, + <&clks IMX27_CLK_FEC_AHB_GATE>; clock-names = "ipg", "ahb"; status = "disabled"; }; @@ -513,7 +546,7 @@ nfc: nand@d8000000 { compatible = "fsl,imx27-nand"; reg = <0xd8000000 0x1000>; interrupts = <29>; - clocks = <&clks 54>; + clocks = <&clks IMX27_CLK_NFC_BAUD_GATE>; status = "disabled"; }; @@ -522,7 +555,7 @@ weim: weim@d8002000 { #size-cells = <1>; compatible = "fsl,imx27-weim"; reg = <0xd8002000 0x1000>; - clocks = <&clks 0>; + clocks = <&clks IMX27_CLK_EMI_AHB_GATE>; ranges = < 0 0 0xc0000000 0x08000000 1 0 0xc8000000 0x08000000 diff --git a/arch/arm/boot/dts/imx28-cfa10036.dts b/arch/arm/boot/dts/imx28-cfa10036.dts index ae7c3390e65a5ddc6210c4d256b406719e624d14..b04b6b8850a71de972c5b3ce0fa6f11454740b9d 100644 --- a/arch/arm/boot/dts/imx28-cfa10036.dts +++ b/arch/arm/boot/dts/imx28-cfa10036.dts @@ -53,6 +53,17 @@ MX28_PAD_GPMI_RDY0__USB0_ID fsl,pull-up = ; }; + mmc_pwr_cfa10036: mmc_pwr_cfa10036@0 { + reg = <0>; + fsl,pinmux-ids = < + 0x31c3 /* + MX28_PAD_PWM3__GPIO_3_28 */ + >; + fsl,drive-strength = <0>; + fsl,voltage = <1>; + fsl,pull-up = <0>; + }; + }; ssp0: ssp@80010000 { @@ -60,6 +71,7 @@ ssp0: ssp@80010000 { pinctrl-names = "default"; pinctrl-0 = <&mmc0_4bit_pins_a &mmc0_cd_cfg &mmc0_sck_cfg>; + vmmc-supply = <®_vddio_sd0>; bus-width = <4>; status = "okay"; }; @@ -116,4 +128,14 @@ power { default-state = "on"; }; }; + + reg_vddio_sd0: vddio-sd0 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&mmc_pwr_cfa10036>; + regulator-name = "vddio-sd0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 28 0>; + }; }; diff --git a/arch/arm/boot/dts/imx28-m28.dtsi b/arch/arm/boot/dts/imx28-m28.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..759cc56253dd2c0d512c51edf30cc406599c98a9 --- /dev/null +++ b/arch/arm/boot/dts/imx28-m28.dtsi @@ -0,0 +1,87 @@ +/* + * Copyright (C) 2014 Marek Vasut + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx28.dtsi" + +/ { + model = "DENX M28"; + compatible = "denx,m28", "fsl,imx28"; + + memory { + reg = <0x40000000 0x08000000>; + }; + + apb@80000000 { + apbh@80000000 { + gpmi-nand@8000c000 { + #address-cells = <1>; + #size-cells = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; + status = "okay"; + + partition@0 { + label = "bootloader"; + reg = <0x00000000 0x00300000>; + read-only; + }; + + partition@1 { + label = "environment"; + reg = <0x00300000 0x00080000>; + }; + + partition@2 { + label = "redundant-environment"; + reg = <0x00380000 0x00080000>; + }; + + partition@3 { + label = "kernel"; + reg = <0x00400000 0x00400000>; + }; + + partition@4 { + label = "filesystem"; + reg = <0x00800000 0x0f800000>; + }; + }; + }; + + apbx@80040000 { + i2c0: i2c@80058000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + rtc: rtc@68 { + compatible = "stm,m41t62"; + reg = <0x68>; + }; + }; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx28-m28evk.dts b/arch/arm/boot/dts/imx28-m28evk.dts index f0ad7b9b9d9a1617eeb64d2d42a1dae872642f32..b3c09ae3b92850ffe5a2c73259f06ca48d93bffc 100644 --- a/arch/arm/boot/dts/imx28-m28evk.dts +++ b/arch/arm/boot/dts/imx28-m28evk.dts @@ -10,52 +10,14 @@ */ /dts-v1/; -#include "imx28.dtsi" +#include "imx28-m28.dtsi" / { model = "DENX M28EVK"; compatible = "denx,m28evk", "fsl,imx28"; - memory { - reg = <0x40000000 0x08000000>; - }; - apb@80000000 { apbh@80000000 { - gpmi-nand@8000c000 { - #address-cells = <1>; - #size-cells = <1>; - pinctrl-names = "default"; - pinctrl-0 = <&gpmi_pins_a &gpmi_status_cfg>; - status = "okay"; - - partition@0 { - label = "bootloader"; - reg = <0x00000000 0x00300000>; - read-only; - }; - - partition@1 { - label = "environment"; - reg = <0x00300000 0x00080000>; - }; - - partition@2 { - label = "redundant-environment"; - reg = <0x00380000 0x00080000>; - }; - - partition@3 { - label = "kernel"; - reg = <0x00400000 0x00400000>; - }; - - partition@4 { - label = "filesystem"; - reg = <0x00800000 0x0f800000>; - }; - }; - ssp0: ssp@80010000 { compatible = "fsl,imx28-mmc"; pinctrl-names = "default"; @@ -175,10 +137,6 @@ saif1: saif@80046000 { }; i2c0: i2c@80058000 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - sgtl5000: codec@0a { compatible = "fsl,sgtl5000"; reg = <0x0a>; @@ -192,11 +150,6 @@ eeprom: eeprom@51 { reg = <0x51>; pagesize = <32>; }; - - rtc: rtc@68 { - compatible = "stm,m41t62"; - reg = <0x68>; - }; }; lradc@80050000 { @@ -284,19 +237,6 @@ backlight { }; regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - reg_3p3v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - }; - reg_vddio_sd0: regulator@1 { compatible = "regulator-fixed"; reg = <1>; diff --git a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts index f04ae91eea8908b541ae170998982ec6c24bc570..75b036700d314cefa0040e88b92bc54e2f595a22 100644 --- a/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts +++ b/arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts @@ -133,7 +133,6 @@ MX35_PAD_CTS2__UART2_CTS 0x1c5 &ssi1 { codec-handle = <&tlv320aic23>; - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx35.dtsi b/arch/arm/boot/dts/imx35.dtsi index 4759abb4943615d393c3b7404731141ac19392f0..442e216ca9d96ef5b8b81fc85bd3a45f723c35e0 100644 --- a/arch/arm/boot/dts/imx35.dtsi +++ b/arch/arm/boot/dts/imx35.dtsi @@ -193,6 +193,14 @@ clks: ccm@53f80000 { #clock-cells = <1>; }; + gpt: timer@53f90000 { + compatible = "fsl,imx35-gpt", "fsl,imx31-gpt"; + reg = <0x53f90000 0x4000>; + interrupts = <29>; + clocks = <&clks 9>, <&clks 50>; + clock-names = "ipg", "per"; + }; + gpio3: gpio@53fa4000 { compatible = "fsl,imx35-gpio", "fsl,imx31-gpio"; reg = <0x53fa4000 0x4000>; diff --git a/arch/arm/boot/dts/imx50.dtsi b/arch/arm/boot/dts/imx50.dtsi index 6a201cf54366345b3f966d91f251dda73016e50d..c0e0f60ab6b22b4f5c80c77594eb908ca547298d 100644 --- a/arch/arm/boot/dts/imx50.dtsi +++ b/arch/arm/boot/dts/imx50.dtsi @@ -151,8 +151,10 @@ ssi2: ssi@50014000 { reg = <0x50014000 0x4000>; interrupts = <30>; clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>; + dmas = <&sdma 24 1 0>, + <&sdma 25 1 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; @@ -457,8 +459,10 @@ ssi1: ssi@63fcc000 { reg = <0x63fcc000 0x4000>; interrupts = <29>; clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>; + dmas = <&sdma 28 0 0>, + <&sdma 29 0 0>; + dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51-babbage.dts b/arch/arm/boot/dts/imx51-babbage.dts index 181d77fa2fa68df10d46282a41415bf711462773..56569cecaa7852795ab94f6046321f13bddd837e 100644 --- a/arch/arm/boot/dts/imx51-babbage.dts +++ b/arch/arm/boot/dts/imx51-babbage.dts @@ -203,6 +203,7 @@ pmic: mc13892@0 { reg = <0>; interrupt-parent = <&gpio1>; interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; + fsl,mc13xxx-uses-rtc; regulators { sw1_reg: sw1 { @@ -392,7 +393,6 @@ MATRIX_KEY(3, 3, KEY_POWER) }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts index 31cfb7f2b02ec141d11c3a762f26ffdb1dae1e27..34599c547459a2d00756cb42bc05cca3f2fa2798 100644 --- a/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts +++ b/arch/arm/boot/dts/imx51-eukrea-mbimxsd51-baseboard.dts @@ -255,7 +255,6 @@ MX51_PAD_EIM_CS3__GPIO2_28 0x1f5 &ssi2 { codec-handle = <&tlv320aic23>; - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index bebbf3ba0d5e37acac9b12e11fbefc732110bff6..17c05a6fa77688930e730f40d35a5e777325f1b9 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -218,7 +218,6 @@ ssi2: ssi@70014000 { <&sdma 25 1 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; @@ -508,7 +507,6 @@ ssi1: ssi@83fcc000 { <&sdma 29 0 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; @@ -564,7 +562,6 @@ ssi3: ssi@83fe8000 { <&sdma 47 0 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <47 46 37 35>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx53-m53.dtsi b/arch/arm/boot/dts/imx53-m53.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..87a7fc709c2d81b40d1eccfb9a41ac3435258208 --- /dev/null +++ b/arch/arm/boot/dts/imx53-m53.dtsi @@ -0,0 +1,140 @@ +/* + * Copyright (C) 2014 Marek Vasut + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "imx53.dtsi" + +/ { + model = "DENX M53"; + compatible = "denx,imx53-m53", "fsl,imx53"; + + memory { + reg = <0x70000000 0x20000000>, + <0xb0000000 0x20000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p2v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3P2V"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; + + reg_backlight: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "lcd-supply"; + regulator-min-microvolt = <3200000>; + regulator-max-microvolt = <3200000>; + regulator-always-on; + }; + }; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <400000>; + status = "okay"; + + stmpe610@41 { + compatible = "st,stmpe610"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + id = <0>; + blocks = <0x5>; + interrupts = <6 0x0>; + interrupt-parent = <&gpio7>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + reg = <0>; + st,sample-time = <4>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,adc-freq = <1>; + st,ave-ctrl = <3>; + st,touch-det-delay = <3>; + st,settling = <4>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; + + eeprom: eeprom@50 { + compatible = "atmel,24c128"; + reg = <0x50>; + pagesize = <32>; + }; + + rtc: rtc@68 { + compatible = "stm,m41t62"; + reg = <0x68>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx53-m53evk { + pinctrl_hog: hoggrp { + fsl,pins = < + MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 + MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 + MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000 + MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000 + >; + }; + + pinctrl_nand: nandgrp { + fsl,pins = < + MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 + MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 + MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 + MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 + MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 + MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 + MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 + MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4 + MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4 + MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4 + MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4 + MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4 + MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4 + MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4 + MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4 + >; + }; + }; +}; + +&nfc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_nand>; + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts index c4956b0ffb3561c35151373628237769c84c474d..d0e0f57eb432e9822b005e986c105fc7949e028b 100644 --- a/arch/arm/boot/dts/imx53-m53evk.dts +++ b/arch/arm/boot/dts/imx53-m53evk.dts @@ -10,17 +10,12 @@ */ /dts-v1/; -#include "imx53.dtsi" +#include "imx53-m53.dtsi" / { model = "DENX M53EVK"; compatible = "denx,imx53-m53evk", "fsl,imx53"; - memory { - reg = <0x70000000 0x20000000>, - <0xb0000000 0x20000000>; - }; - display1: display@di1 { compatible = "fsl,imx-parallel-display"; interface-pix-fmt = "bgr666"; @@ -81,25 +76,6 @@ regulators { #address-cells = <1>; #size-cells = <0>; - reg_3p2v: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "3P2V"; - regulator-min-microvolt = <3200000>; - regulator-max-microvolt = <3200000>; - regulator-always-on; - }; - - - reg_backlight: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "lcd-supply"; - regulator-min-microvolt = <3200000>; - regulator-max-microvolt = <3200000>; - regulator-always-on; - }; - reg_usbh1_vbus: regulator@3 { compatible = "regulator-fixed"; reg = <3>; @@ -174,50 +150,6 @@ sgtl5000: codec@0a { }; }; -&i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clock-frequency = <400000>; - status = "okay"; - - stmpe610@41 { - compatible = "st,stmpe610"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x41>; - id = <0>; - blocks = <0x5>; - interrupts = <6 0x0>; - interrupt-parent = <&gpio7>; - irq-trigger = <0x1>; - - stmpe_touchscreen { - compatible = "st,stmpe-ts"; - reg = <0>; - st,sample-time = <4>; - st,mod-12b = <1>; - st,ref-sel = <0>; - st,adc-freq = <1>; - st,ave-ctrl = <3>; - st,touch-det-delay = <3>; - st,settling = <4>; - st,fraction-z = <7>; - st,i-drive = <1>; - }; - }; - - eeprom: eeprom@50 { - compatible = "atmel,24c128"; - reg = <0x50>; - pagesize = <32>; - }; - - rtc: rtc@68 { - compatible = "stm,m41t62"; - reg = <0x68>; - }; -}; - &i2c3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c3>; @@ -229,11 +161,8 @@ &iomuxc { pinctrl-0 = <&pinctrl_hog>; imx53-m53evk { - pinctrl_hog: hoggrp { + pinctrl_usb: usbgrp { fsl,pins = < - MX53_PAD_GPIO_0__CCM_SSI_EXT1_CLK 0x80000000 - MX53_PAD_EIM_EB3__GPIO2_31 0x80000000 - MX53_PAD_PATA_DA_0__GPIO7_6 0x80000000 MX53_PAD_GPIO_2__GPIO1_2 0x80000000 MX53_PAD_GPIO_3__USBOH3_USBH1_OC 0x80000000 >; @@ -302,13 +231,6 @@ MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000 >; }; - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX53_PAD_EIM_D16__I2C2_SDA 0xc0000000 - MX53_PAD_EIM_EB2__I2C2_SCL 0xc0000000 - >; - }; - pinctrl_i2c3: i2c3grp { fsl,pins = < MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000 @@ -353,26 +275,6 @@ MX53_PAD_EIM_DA10__IPU_DI1_PIN15 0x5 >; }; - pinctrl_nand: nandgrp { - fsl,pins = < - MX53_PAD_NANDF_WE_B__EMI_NANDF_WE_B 0x4 - MX53_PAD_NANDF_RE_B__EMI_NANDF_RE_B 0x4 - MX53_PAD_NANDF_CLE__EMI_NANDF_CLE 0x4 - MX53_PAD_NANDF_ALE__EMI_NANDF_ALE 0x4 - MX53_PAD_NANDF_WP_B__EMI_NANDF_WP_B 0xe0 - MX53_PAD_NANDF_RB0__EMI_NANDF_RB_0 0xe0 - MX53_PAD_NANDF_CS0__EMI_NANDF_CS_0 0x4 - MX53_PAD_PATA_DATA0__EMI_NANDF_D_0 0xa4 - MX53_PAD_PATA_DATA1__EMI_NANDF_D_1 0xa4 - MX53_PAD_PATA_DATA2__EMI_NANDF_D_2 0xa4 - MX53_PAD_PATA_DATA3__EMI_NANDF_D_3 0xa4 - MX53_PAD_PATA_DATA4__EMI_NANDF_D_4 0xa4 - MX53_PAD_PATA_DATA5__EMI_NANDF_D_5 0xa4 - MX53_PAD_PATA_DATA6__EMI_NANDF_D_6 0xa4 - MX53_PAD_PATA_DATA7__EMI_NANDF_D_7 0xa4 - >; - }; - pinctrl_pwm1: pwm1grp { fsl,pins = < MX53_PAD_DISP0_DAT8__PWM1_PWMO 0x5 @@ -408,14 +310,6 @@ &ipu_di1_disp1 { remote-endpoint = <&display1_in>; }; -&nfc { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_nand>; - nand-bus-width = <8>; - nand-ecc-mode = "hw"; - status = "okay"; -}; - &pwm1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pwm1>; @@ -427,7 +321,6 @@ &sata { }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; @@ -450,6 +343,8 @@ &uart3 { }; &usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb>; vbus-supply = <®_usbh1_vbus>; phy_type = "utmi"; status = "okay"; diff --git a/arch/arm/boot/dts/imx53-mba53.dts b/arch/arm/boot/dts/imx53-mba53.dts index 3e3f17aa93a15e1335cd9fab5ab71bb0b38b47b0..2e44d2aba14e08081075769ac1f59325a4db4d00 100644 --- a/arch/arm/boot/dts/imx53-mba53.dts +++ b/arch/arm/boot/dts/imx53-mba53.dts @@ -225,7 +225,6 @@ &uart1 { }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-qsb-common.dtsi b/arch/arm/boot/dts/imx53-qsb-common.dtsi index fd8c60dde7de7078fab6dfa41cb3d3083533d9b2..181ae5ebf23f64396c8a0b24aa01ef7121c73c87 100644 --- a/arch/arm/boot/dts/imx53-qsb-common.dtsi +++ b/arch/arm/boot/dts/imx53-qsb-common.dtsi @@ -141,7 +141,6 @@ &ipu_di0_disp0 { }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi index e348796ba68957bcfba56d1ab75f5a73374e71c4..704bd72cbfec823da4145ead1fd6e7dc719d094b 100644 --- a/arch/arm/boot/dts/imx53-tx53.dtsi +++ b/arch/arm/boot/dts/imx53-tx53.dtsi @@ -502,7 +502,6 @@ &sdma { }; &ssi1 { - fsl,mode = "i2s-slave"; codec-handle = <&sgtl5000>; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53-voipac-bsb.dts b/arch/arm/boot/dts/imx53-voipac-bsb.dts index 7f6711a486151dad8fa9a7406422eec17164f55e..c17d3ad6dba50213c18a9076ca15c261d6740e77 100644 --- a/arch/arm/boot/dts/imx53-voipac-bsb.dts +++ b/arch/arm/boot/dts/imx53-voipac-bsb.dts @@ -154,6 +154,5 @@ &kpp { }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 6456a0084388cf78b54c217249a7aaab2e323714..64fa27b36be0c957b7e8b39610eac563c730b99b 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -108,7 +108,7 @@ sata: sata@10000000 { clocks = <&clks IMX5_CLK_SATA_GATE>, <&clks IMX5_CLK_SATA_REF>, <&clks IMX5_CLK_AHB>; - clock-names = "sata_gate", "sata_ref", "ahb"; + clock-names = "sata", "sata_ref", "ahb"; status = "disabled"; }; @@ -231,7 +231,6 @@ ssi2: ssi@50014000 { <&sdma 25 1 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <25 24 23 22>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; @@ -260,6 +259,11 @@ esdhc4: esdhc@50024000 { }; }; + aipstz1: bridge@53f00000 { + compatible = "fsl,imx53-aipstz"; + reg = <0x53f00000 0x60>; + }; + usbphy0: usbphy@0 { compatible = "usb-nop-xceiv"; clocks = <&clks IMX5_CLK_USB_PHY1_GATE>; @@ -572,6 +576,11 @@ aips@60000000 { /* AIPS2 */ reg = <0x60000000 0x10000000>; ranges; + aipstz2: bridge@63f00000 { + compatible = "fsl,imx53-aipstz"; + reg = <0x63f00000 0x60>; + }; + iim: iim@63f98000 { compatible = "fsl,imx53-iim", "fsl,imx27-iim"; reg = <0x63f98000 0x4000>; @@ -661,7 +670,6 @@ ssi1: ssi@63fcc000 { <&sdma 29 0 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <29 28 27 26>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; @@ -689,7 +697,6 @@ ssi3: ssi@63fe8000 { <&sdma 47 0 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <47 46 45 44>; /* TX0 RX0 TX1 RX1 */ status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts new file mode 100644 index 0000000000000000000000000000000000000000..9cd06e5e59f00e35b579c07118eed164872330b9 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-aristainetos_4.dts @@ -0,0 +1,85 @@ +/* + * support fot the imx6 based aristainetos board + * + * Copyright (C) 2014 Heiko Schocher + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-aristainetos.dtsi" + +/ { + model = "aristainetos i.MX6 Dual Lite Board 4"; + compatible = "fsl,imx6dl"; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 5000000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + enable-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + status = "okay"; + }; + + memory { + reg = <0x10000000 0x40000000>; + }; + + soc { + display0: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp>; + status = "okay"; + + display-timings { + 480x800p60 { + native-mode; + clock-frequency = <30000000>; + hactive = <480>; + vactive = <800>; + hfront-porch = <59>; + hback-porch = <10>; + hsync-len = <10>; + vback-porch = <15>; + vfront-porch = <15>; + vsync-len = <15>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + }; + }; +}; + +&ecspi2 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; diff --git a/arch/arm/boot/dts/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts new file mode 100644 index 0000000000000000000000000000000000000000..b413e24288dcb08b5ba5b73d461eaf67c3e2b175 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-aristainetos_7.dts @@ -0,0 +1,74 @@ +/* + * support fot the imx6 based aristainetos board + * + * Copyright (C) 2014 Heiko Schocher + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-aristainetos.dtsi" + +/ { + model = "aristainetos i.MX6 Dual Lite Board 7"; + compatible = "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; + + soc { + display0: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu_disp>; + status = "okay"; + + display-timings { + 800x480p60 { + native-mode; + clock-frequency = <33246000>; + hactive = <800>; + vactive = <480>; + hfront-porch = <88>; + hback-porch = <88>; + hsync-len = <80>; + vback-porch = <10>; + vfront-porch = <10>; + vsync-len = <25>; + vsync-active = <1>; + }; + }; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + }; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm3 0 3000>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_backlight>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; diff --git a/arch/arm/boot/dts/imx6dl-gw51xx.dts b/arch/arm/boot/dts/imx6dl-gw51xx.dts index 4bd055f4c93041a8cfddae33b4727368b0a0d1d4..b2bd022fc6be418a04f1e5ddc1ff60ea9da034f6 100644 --- a/arch/arm/boot/dts/imx6dl-gw51xx.dts +++ b/arch/arm/boot/dts/imx6dl-gw51xx.dts @@ -14,6 +14,6 @@ #include "imx6qdl-gw51xx.dtsi" / { - model = "Gateworks Ventana i.MX6 DualLite GW51XX"; + model = "Gateworks Ventana i.MX6 DualLite/Solo GW51XX"; compatible = "gw,imx6dl-gw51xx", "gw,ventana", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6dl-gw52xx.dts b/arch/arm/boot/dts/imx6dl-gw52xx.dts index c9136058f15e35a2cc8bc97755b9e4a3153e89a0..a2e0b73fdd4a78440aac51149d9b251fc04707af 100644 --- a/arch/arm/boot/dts/imx6dl-gw52xx.dts +++ b/arch/arm/boot/dts/imx6dl-gw52xx.dts @@ -14,6 +14,6 @@ #include "imx6qdl-gw52xx.dtsi" / { - model = "Gateworks Ventana i.MX6 DualLite GW52XX"; + model = "Gateworks Ventana i.MX6 DualLite/Solo GW52XX"; compatible = "gw,imx6dl-gw52xx", "gw,ventana", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6dl-gw53xx.dts b/arch/arm/boot/dts/imx6dl-gw53xx.dts index 61818a14fde67ff87f5670ca1e7d65c1e7979f08..6844b708d2f89ec09b6da02f0965fad905ed0b3d 100644 --- a/arch/arm/boot/dts/imx6dl-gw53xx.dts +++ b/arch/arm/boot/dts/imx6dl-gw53xx.dts @@ -14,6 +14,6 @@ #include "imx6qdl-gw53xx.dtsi" / { - model = "Gateworks Ventana i.MX6 DualLite GW53XX"; + model = "Gateworks Ventana i.MX6 DualLite/Solo GW53XX"; compatible = "gw,imx6dl-gw53xx", "gw,ventana", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6dl-gw54xx.dts b/arch/arm/boot/dts/imx6dl-gw54xx.dts index ab38b6770a06000676cd1b97d5ca432216b446d5..be915412f852ea5af34121808ecc22b04c592b4e 100644 --- a/arch/arm/boot/dts/imx6dl-gw54xx.dts +++ b/arch/arm/boot/dts/imx6dl-gw54xx.dts @@ -14,6 +14,6 @@ #include "imx6qdl-gw54xx.dtsi" / { - model = "Gateworks Ventana i.MX6 DualLite GW54XX"; + model = "Gateworks Ventana i.MX6 DualLite/Solo GW54XX"; compatible = "gw,imx6dl-gw54xx", "gw,ventana", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/imx6dl-rex-basic.dts b/arch/arm/boot/dts/imx6dl-rex-basic.dts new file mode 100644 index 0000000000000000000000000000000000000000..b13845c2823b0a0f22448022121c7110f40b1ed8 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-rex-basic.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2014 FEDEVEL, Inc. + * + * Author: Robert Nelson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-rex.dtsi" + +/ { + model = "Rex Basic i.MX6 Dual Lite Board"; + compatible = "rex,imx6dl-rex-basic", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x20000000>; + }; +}; + +&ecspi3 { + flash: m25p80@0 { + compatible = "sst,sst25vf016b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts index 909fafc0b650f4debd18f9f92e7725424ac3efe4..43cb3fd76be764cdceb08efd949f47866ebe03e9 100644 --- a/arch/arm/boot/dts/imx6dl-riotboard.dts +++ b/arch/arm/boot/dts/imx6dl-riotboard.dts @@ -254,7 +254,6 @@ &pwm4 { }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; @@ -335,10 +334,10 @@ &iomuxc { imx6-riotboard { pinctrl_audmux: audmuxgrp { fsl,pins = < - MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x8000000 - MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x8000000 - MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x8000000 - MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x8000000 + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM_MCLK */ >; }; @@ -376,7 +375,7 @@ pinctrl_enet: enetgrp { fsl,pins = < MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 @@ -389,9 +388,9 @@ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x130b0 /* AR8035 pin strapping: PHYADDR#1: pu MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 /* AR8035 pin strapping: MODE#1: pull up */ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 /* AR8035 pin strapping: MODE#3: pull up */ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x130b0 /* AR8035 pin strapping: MODE#0: pull down */ - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 /* GPIO16 -> AR8035 25MHz */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 /* GPIO16 -> AR8035 25MHz */ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x130b0 /* RGMII_nRST */ - MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* AR8035 interrupt */ + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x180b0 /* AR8035 interrupt */ MX6QDL_PAD_GPIO_6__ENET_IRQ 0x000b1 >; }; @@ -426,8 +425,8 @@ MX6QDL_PAD_GPIO_8__I2C4_SDA 0x4001b8b1 pinctrl_led: ledgrp { fsl,pins = < - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* user led0 */ - MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x80000000 /* user led1 */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* user led0 */ + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x1b0b1 /* user led1 */ >; }; @@ -493,8 +492,8 @@ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 pinctrl_usbotg: usbotggrp { fsl,pins = < MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 - MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */ - MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x80000000 + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x000b0 /* MX6QDL_PAD_EIM_D22__USB_OTG_PWR */ + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 >; }; @@ -506,8 +505,8 @@ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* SD2 CD */ - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* SD2 WP */ + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 /* SD2 CD */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1f0b0 /* SD2 WP */ >; }; @@ -519,8 +518,8 @@ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 - MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x80000000 /* SD3 CD */ - MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x80000000 /* SD3 WP */ + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b0 /* SD3 CD */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1f0b0 /* SD3 WP */ >; }; @@ -532,7 +531,7 @@ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 - MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x80000000 /* SD4 RST (eMMC) */ + MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x17059 /* SD4 RST (eMMC) */ >; }; }; diff --git a/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts new file mode 100644 index 0000000000000000000000000000000000000000..913bb9a0466a4a8f5f5146c2e535c7d9305fab62 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts @@ -0,0 +1,103 @@ +/* + * Copyright 2014 Lothar Waßmann + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6DL Module on CoMpact TFT"; + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&ET070001DM6>; + + ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&can1 { + status = "disabled"; +}; + +&can2 { + xceiver-supply = <®_3v3>; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&kpp { + status = "disabled"; +}; + +®_can_xcvr { + status = "disabled"; +}; + +&touchscreen { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-801x.dts b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts new file mode 100644 index 0000000000000000000000000000000000000000..5fe465c2814ecb982a871a5e4274cac714591b82 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-801x.dts @@ -0,0 +1,177 @@ +/* + * Copyright 2014 Lothar Waßmann + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-801x Module"; + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; diff --git a/arch/arm/boot/dts/imx6dl-tx6u-811x.dts b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts new file mode 100644 index 0000000000000000000000000000000000000000..c275eecc9472006de381c2a450025badea821f2c --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-tx6u-811x.dts @@ -0,0 +1,150 @@ +/* + * Copyright 2014 Lothar Waßmann + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6U-811x Module"; + compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl"; + + aliases { + display = &lvds0; + lvds0 = &lvds0; + lvds1 = &lvds1; + }; + + backlight0: backlight0 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_lcd0_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + backlight1: backlight1 { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 0>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; +}; + +&i2c3 { + polytouch2: eeti@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eeti>; + interrupt-parent = <&gpio3>; + interrupts = <22 0>; + wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + linux,wakeup; + }; +}; + +&iomuxc { + imx6dl-tx6u-811x { + pinctrl_eeti: eetigrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ + >; + }; + }; +}; + +&kpp { + status = "disabled"; /* pad conflict with backlight1 PWM */ +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&lvds_timing0>; + lvds_timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + + lvds1: lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "disabled"; + + display-timings { + native-mode = <&lvds_timing1>; + lvds_timing1: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts new file mode 100644 index 0000000000000000000000000000000000000000..f607d4f1d2448069add1c8a83d8a556e4d3f52a6 --- /dev/null +++ b/arch/arm/boot/dts/imx6dl-wandboard-revb1.dts @@ -0,0 +1,22 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6dl.dtsi" +#include "imx6qdl-wandboard-revb1.dtsi" + +/ { + model = "Wandboard i.MX6 Dual Lite Board"; + compatible = "wand,imx6dl-wandboard", "fsl,imx6dl"; + + memory { + reg = <0x10000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/imx6dl-wandboard.dts b/arch/arm/boot/dts/imx6dl-wandboard.dts index e672891c1626757cd751888a9b97b78066558947..bbb6167230972661a6dc58347a68760dce85ef8c 100644 --- a/arch/arm/boot/dts/imx6dl-wandboard.dts +++ b/arch/arm/boot/dts/imx6dl-wandboard.dts @@ -10,7 +10,7 @@ */ /dts-v1/; #include "imx6dl.dtsi" -#include "imx6qdl-wandboard.dtsi" +#include "imx6qdl-wandboard-revc1.dtsi" / { model = "Wandboard i.MX6 Dual Lite Board"; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index 0a9c49d69d418c4ea46320e33f055b94d4ec2c54..b453e0e28aeec5d537e4b4da0f664f36d946bb70 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -35,8 +35,11 @@ cpu@0 { 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ - clocks = <&clks 104>, <&clks 6>, <&clks 16>, - <&clks 17>, <&clks 170>; + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; clock-names = "arm", "pll2_pfd2_396m", "step", "pll1_sw", "pll1_sys"; arm-supply = <®_arm>; @@ -56,7 +59,7 @@ soc { ocram: sram@00900000 { compatible = "mmio-sram"; reg = <0x00900000 0x20000>; - clocks = <&clks 142>; + clocks = <&clks IMX6QDL_CLK_OCRAM>; }; aips1: aips-bus@02000000 { @@ -87,7 +90,7 @@ i2c4: i2c@021f8000 { compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021f8000 0x4000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 116>; + clocks = <&clks IMX6DL_CLK_I2C4>; status = "disabled"; }; }; @@ -104,9 +107,9 @@ &hdmi { }; &ldb { - clocks = <&clks 33>, <&clks 34>, - <&clks 39>, <&clks 40>, - <&clks 135>, <&clks 136>; + clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, + <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>; clock-names = "di0_pll", "di1_pll", "di0_sel", "di1_sel", "di0", "di1"; diff --git a/arch/arm/boot/dts/imx6q-cubox-i.dts b/arch/arm/boot/dts/imx6q-cubox-i.dts index bc5f31e3e892f2617927bd28ac3e2c133a7e0a4a..9efd8b0c8011fea501c0033e3da5dd5cfed3e849 100644 --- a/arch/arm/boot/dts/imx6q-cubox-i.dts +++ b/arch/arm/boot/dts/imx6q-cubox-i.dts @@ -13,4 +13,8 @@ / { &sata { status = "okay"; + fsl,transmit-level-mV = <1104>; + fsl,transmit-boost-mdB = <0>; + fsl,transmit-atten-16ths = <9>; + fsl,no-spread-spectrum; }; diff --git a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts index e0302636aff5164d52ffbf6f7d4f710c43929ed8..8c1cb53464a0f6bb7e96cd7a412c0a2e2eea8489 100644 --- a/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts +++ b/arch/arm/boot/dts/imx6q-dmo-edmqmx6.dts @@ -95,6 +95,12 @@ led-red { }; }; +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_can1>; + status = "okay"; +}; + &ecspi5 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi5>; @@ -118,6 +124,13 @@ &fec { status = "okay"; }; +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + &i2c2 { clock-frequency = <100000>; pinctrl-names = "default"; @@ -274,6 +287,13 @@ rtc: m41t62@68 { }; }; +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -286,6 +306,13 @@ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x80000000 >; }; + pinctrl_can1: can1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + >; + }; + pinctrl_ecspi5: ecspi5rp-1 { fsl,pins = < MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000 @@ -316,6 +343,13 @@ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 >; }; + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + pinctrl_i2c2: i2c2grp { fsl,pins = < MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 @@ -323,6 +357,19 @@ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 >; }; + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x100b1 + >; + }; + pinctrl_pfuze: pfuze100grp1 { fsl,pins = < MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x80000000 @@ -385,6 +432,13 @@ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 }; }; +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 8 0>; + status = "okay"; +}; + &sata { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-gw51xx.dts b/arch/arm/boot/dts/imx6q-gw51xx.dts index 0e1406e58eff1d73a3601d09858147fecbb1b9e0..8e8bcd8fe0fb1c11dc63c5b58760ab1768919510 100644 --- a/arch/arm/boot/dts/imx6q-gw51xx.dts +++ b/arch/arm/boot/dts/imx6q-gw51xx.dts @@ -14,6 +14,6 @@ #include "imx6qdl-gw51xx.dtsi" / { - model = "Gateworks Ventana i.MX6 Quad GW51XX"; + model = "Gateworks Ventana i.MX6 Dual/Quad GW51XX"; compatible = "gw,imx6q-gw51xx", "gw,ventana", "fsl,imx6q"; }; diff --git a/arch/arm/boot/dts/imx6q-gw52xx.dts b/arch/arm/boot/dts/imx6q-gw52xx.dts index 5f71ddbc7f05ac6d503a45cd1d2ba02508d7d6ae..a12c47e5ee059fbf45216ee6a9e65ce06f2f97b0 100644 --- a/arch/arm/boot/dts/imx6q-gw52xx.dts +++ b/arch/arm/boot/dts/imx6q-gw52xx.dts @@ -14,7 +14,7 @@ #include "imx6qdl-gw52xx.dtsi" / { - model = "Gateworks Ventana i.MX6 Quad GW52XX"; + model = "Gateworks Ventana i.MX6 Dual/Quad GW52XX"; compatible = "gw,imx6q-gw52xx", "gw,ventana", "fsl,imx6q"; }; diff --git a/arch/arm/boot/dts/imx6q-gw53xx.dts b/arch/arm/boot/dts/imx6q-gw53xx.dts index 360c316b47402d440ba94cb404598401c07173ae..d76aaa83dad070ade4861a599dee1168da69c5cf 100644 --- a/arch/arm/boot/dts/imx6q-gw53xx.dts +++ b/arch/arm/boot/dts/imx6q-gw53xx.dts @@ -14,7 +14,7 @@ #include "imx6qdl-gw53xx.dtsi" / { - model = "Gateworks Ventana i.MX6 Quad GW53XX"; + model = "Gateworks Ventana i.MX6 Dual/Quad GW53XX"; compatible = "gw,imx6q-gw53xx", "gw,ventana", "fsl,imx6q"; }; diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 3689eaa58826eecebce2ec4dd4adda99b12d2fc2..22e6f8e657d2389f97b2c12bc14181d34d34819e 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -115,9 +115,9 @@ reg_usb_otg_vbus: regulator@3 { }; sound { - compatible = "fsl,imx6q-sabrelite-sgtl5000", + compatible = "fsl,imx6q-ventana-sgtl5000", "fsl,imx-audio-sgtl5000"; - model = "imx6q-sabrelite-sgtl5000"; + model = "sgtl5000-audio"; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -504,7 +504,6 @@ eth1: sky2@8 { /* MAC/PHY on bus 8 */ }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6q-gw54xx.dts b/arch/arm/boot/dts/imx6q-gw54xx.dts index ab518d66a75eadf842a9c5ece60abf4fd2c9acdf..6e8f53e92a2d24d49d4d1fb15788a4237fe08890 100644 --- a/arch/arm/boot/dts/imx6q-gw54xx.dts +++ b/arch/arm/boot/dts/imx6q-gw54xx.dts @@ -14,7 +14,7 @@ #include "imx6qdl-gw54xx.dtsi" / { - model = "Gateworks Ventana i.MX6 Quad GW54XX"; + model = "Gateworks Ventana i.MX6 Dual/Quad GW54XX"; compatible = "gw,imx6q-gw54xx", "gw,ventana", "fsl,imx6q"; }; diff --git a/arch/arm/boot/dts/imx6q-rex-pro.dts b/arch/arm/boot/dts/imx6q-rex-pro.dts new file mode 100644 index 0000000000000000000000000000000000000000..3c2852b16f78c9815ddc1da683566b1c1f09aa20 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-rex-pro.dts @@ -0,0 +1,34 @@ +/* + * Copyright 2014 FEDEVEL, Inc. + * + * Author: Robert Nelson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-rex.dtsi" + +/ { + model = "Rex Pro i.MX6 Quad Board"; + compatible = "rex,imx6q-rex-pro", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&ecspi3 { + flash: m25p80@0 { + compatible = "sst,sst25vf032b"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts new file mode 100644 index 0000000000000000000000000000000000000000..b18fae10b2e3fe568ca562f42340fdca019b58e6 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts @@ -0,0 +1,103 @@ +/* + * Copyright 2014 Lothar Waßmann + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT"; + compatible = "karo,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&ET070001DM6>; + + ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&can1 { + status = "disabled"; +}; + +&can2 { + xceiver-supply = <®_3v3>; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&kpp { + status = "disabled"; +}; + +®_can_xcvr { + status = "disabled"; +}; + +&touchscreen { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1010.dts b/arch/arm/boot/dts/imx6q-tx6q-1010.dts new file mode 100644 index 0000000000000000000000000000000000000000..b58ec9c966c8139e87ffe28912bb40f1bf460d46 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-1010.dts @@ -0,0 +1,177 @@ +/* + * Copyright 2014 Lothar Waßmann + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1010 Module"; + compatible = "karo,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts new file mode 100644 index 0000000000000000000000000000000000000000..0bb9a9de62a9249d278ec5c1fdb67ad8b05fe5e6 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-1020-comtft.dts @@ -0,0 +1,136 @@ +/* + * Copyright 2014 Lothar Waßmann + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1020 Module on CoMpact TFT"; + compatible = "karo,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + native-mode = <&ET070001DM6>; + + ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&can1 { + status = "disabled"; +}; + +&can2 { + xceiver-supply = <®_3v3>; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&iomuxc { + imx6qdl-tx6 { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&kpp { + status = "disabled"; +}; + +®_can_xcvr { + status = "disabled"; +}; + +&touchscreen { + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1020.dts b/arch/arm/boot/dts/imx6q-tx6q-1020.dts new file mode 100644 index 0000000000000000000000000000000000000000..b96d80a35d3909578419d7027ef23f23a82a324c --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-1020.dts @@ -0,0 +1,210 @@ +/* + * Copyright 2014 Lothar Waßmann + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1020 Module"; + compatible = "karo,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &display; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>; + power-supply = <®_3v3>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + display: display@di0 { + compatible = "fsl,imx-parallel-display"; + interface-pix-fmt = "rgb24"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_disp0_1>; + status = "okay"; + + port { + display0_in: endpoint { + remote-endpoint = <&ipu1_di0_disp0>; + }; + }; + + display-timings { + VGA { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <48>; + hsync-len = <96>; + hfront-porch = <16>; + vback-porch = <31>; + vsync-len = <2>; + vfront-porch = <12>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETV570 { + clock-frequency = <25200000>; + hactive = <640>; + vactive = <480>; + hback-porch = <114>; + hsync-len = <30>; + hfront-porch = <16>; + vback-porch = <32>; + vsync-len = <3>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0350 { + clock-frequency = <6413760>; + hactive = <320>; + vactive = <240>; + hback-porch = <34>; + hsync-len = <34>; + hfront-porch = <20>; + vback-porch = <15>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0430 { + clock-frequency = <9009000>; + hactive = <480>; + vactive = <272>; + hback-porch = <2>; + hsync-len = <41>; + hfront-porch = <2>; + vback-porch = <2>; + vsync-len = <10>; + vfront-porch = <2>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + + ET0500 { + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ET0700 { /* same as ET0500 */ + clock-frequency = <33264000>; + hactive = <800>; + vactive = <480>; + hback-porch = <88>; + hsync-len = <128>; + hfront-porch = <40>; + vback-porch = <33>; + vsync-len = <2>; + vfront-porch = <10>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + + ETQ570 { + clock-frequency = <6596040>; + hactive = <320>; + vactive = <240>; + hback-porch = <38>; + hsync-len = <30>; + hfront-porch = <30>; + vback-porch = <16>; + vsync-len = <3>; + vfront-porch = <4>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <0>; + }; + }; + }; +}; + +&ds1339 { + status = "disabled"; +}; + +&gpmi { + status = "disabled"; +}; + +&iomuxc { + imx6qdl-tx6 { + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x070b1 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x070b1 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x070b1 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x070b1 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x070b1 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x070b1 + MX6QDL_PAD_NANDF_ALE__SD4_RESET 0x0b0b1 + >; + }; + }; +}; + +&ipu1_di0_disp0 { + remote-endpoint = <&display0_in>; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <4>; + no-1-8-v; + fsl,wp-controller; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-tx6q-1110.dts b/arch/arm/boot/dts/imx6q-tx6q-1110.dts new file mode 100644 index 0000000000000000000000000000000000000000..88aa1e4c792d2c2c5d56d8a819cac4640bb46369 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tx6q-1110.dts @@ -0,0 +1,154 @@ +/* + * Copyright 2014 Lothar Waßmann + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-tx6.dtsi" + +/ { + model = "Ka-Ro electronics TX6Q-1110 Module"; + compatible = "karo,imx6q-tx6q", "fsl,imx6q"; + + aliases { + display = &lvds0; + lvds0 = &lvds0; + lvds1 = &lvds1; + }; + + backlight0: backlight0 { + compatible = "pwm-backlight"; + pwms = <&pwm2 0 500000 0>; + power-supply = <®_lcd0_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; + + backlight1: backlight1 { + compatible = "pwm-backlight"; + pwms = <&pwm1 0 500000 0>; + power-supply = <®_lcd1_pwr>; + /* + * a poor man's way to create a 1:1 relationship between + * the PWM value and the actual duty cycle + */ + brightness-levels = < 0 1 2 3 4 5 6 7 8 9 + 10 11 12 13 14 15 16 17 18 19 + 20 21 22 23 24 25 26 27 28 29 + 30 31 32 33 34 35 36 37 38 39 + 40 41 42 43 44 45 46 47 48 49 + 50 51 52 53 54 55 56 57 58 59 + 60 61 62 63 64 65 66 67 68 69 + 70 71 72 73 74 75 76 77 78 79 + 80 81 82 83 84 85 86 87 88 89 + 90 91 92 93 94 95 96 97 98 99 + 100>; + default-brightness-level = <50>; + }; +}; + +&i2c3 { + polytouch1: eeti@04 { + compatible = "eeti,egalax_ts"; + reg = <0x04>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_eeti>; + interrupt-parent = <&gpio3>; + interrupts = <22 0>; + wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; + linux,wakeup; + }; +}; + +&iomuxc { + imx6q-tx6q-1110 { + pinctrl_eeti: eetigrp { + fsl,pins = < + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */ + >; + }; + }; +}; + +&kpp { + status = "disabled"; /* pad conflict with backlight1 PWM */ +}; + +&ldb { + status = "okay"; + + lvds0: lvds-channel@0 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "okay"; + + display-timings { + native-mode = <&lvds_timing0>; + lvds_timing0: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; + + lvds1: lvds-channel@1 { + fsl,data-mapping = "spwg"; + fsl,data-width = <18>; + status = "disabled"; + + display-timings { + native-mode = <&lvds_timing1>; + lvds_timing1: hsd100pxn1 { + clock-frequency = <65000000>; + hactive = <1024>; + vactive = <768>; + hback-porch = <220>; + hfront-porch = <40>; + vback-porch = <21>; + vfront-porch = <7>; + hsync-len = <60>; + vsync-len = <10>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; + }; +}; + +&pwm1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-udoo.dts b/arch/arm/boot/dts/imx6q-udoo.dts index 6c561060bf5cac65e9484b5c46a4439c6d910793..e3bff2ac00db28f25f239bd9b2922ebfc9bd8e02 100644 --- a/arch/arm/boot/dts/imx6q-udoo.dts +++ b/arch/arm/boot/dts/imx6q-udoo.dts @@ -23,6 +23,23 @@ chosen { memory { reg = <0x10000000 0x40000000>; }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_usb_h1_vbus: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + startup-delay-us = <2>; /* USB2415 requires a POR of 1 us minimum */ + gpio = <&gpio7 12 0>; + }; + }; }; &fec { @@ -81,6 +98,13 @@ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 >; }; + pinctrl_usbh: usbhgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 + MX6QDL_PAD_NANDF_CS2__CCM_CLKO2 0x130b0 + >; + }; + pinctrl_usdhc3: usdhc3grp { fsl,pins = < MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 @@ -104,6 +128,14 @@ &uart2 { status = "okay"; }; +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh>; + vbus-supply = <®_usb_h1_vbus>; + clocks = <&clks 201>; + status = "okay"; +}; + &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; diff --git a/arch/arm/boot/dts/imx6q-wandboard-revb1.dts b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts new file mode 100644 index 0000000000000000000000000000000000000000..20bf3c28262308ba919bf9d63c995d88f45c4ae0 --- /dev/null +++ b/arch/arm/boot/dts/imx6q-wandboard-revb1.dts @@ -0,0 +1,26 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ +/dts-v1/; +#include "imx6q.dtsi" +#include "imx6qdl-wandboard-revb1.dtsi" + +/ { + model = "Wandboard i.MX6 Quad Board"; + compatible = "wand,imx6q-wandboard", "fsl,imx6q"; + + memory { + reg = <0x10000000 0x80000000>; + }; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6q-wandboard.dts b/arch/arm/boot/dts/imx6q-wandboard.dts index 36be17f207b14c95396c5b2bb3b7e7a35c113744..4a8a6ee13e9f52f4765920d0de11dd09b601bc41 100644 --- a/arch/arm/boot/dts/imx6q-wandboard.dts +++ b/arch/arm/boot/dts/imx6q-wandboard.dts @@ -10,7 +10,7 @@ */ /dts-v1/; #include "imx6q.dtsi" -#include "imx6qdl-wandboard.dtsi" +#include "imx6qdl-wandboard-revc1.dtsi" / { model = "Wandboard i.MX6 Quad Board"; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index addd3f881ce2b6358cbfce34822e3273af714a63..e9f3646d1760618cb04027329754c53194068a8c 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -43,8 +43,11 @@ cpu@0 { 396000 1175000 >; clock-latency = <61036>; /* two CLK32 periods */ - clocks = <&clks 104>, <&clks 6>, <&clks 16>, - <&clks 17>, <&clks 170>; + clocks = <&clks IMX6QDL_CLK_ARM>, + <&clks IMX6QDL_CLK_PLL2_PFD2_396M>, + <&clks IMX6QDL_CLK_STEP>, + <&clks IMX6QDL_CLK_PLL1_SW>, + <&clks IMX6QDL_CLK_PLL1_SYS>; clock-names = "arm", "pll2_pfd2_396m", "step", "pll1_sw", "pll1_sys"; arm-supply = <®_arm>; @@ -78,7 +81,7 @@ soc { ocram: sram@00900000 { compatible = "mmio-sram"; reg = <0x00900000 0x40000>; - clocks = <&clks 142>; + clocks = <&clks IMX6QDL_CLK_OCRAM>; }; aips-bus@02000000 { /* AIPS1 */ @@ -89,7 +92,8 @@ ecspi5: ecspi@02018000 { compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02018000 0x4000>; interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 116>, <&clks 116>; + clocks = <&clks IMX6Q_CLK_ECSPI5>, + <&clks IMX6Q_CLK_ECSPI5>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -140,7 +144,9 @@ sata: sata@02200000 { compatible = "fsl,imx6q-ahci"; reg = <0x02200000 0x4000>; interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 154>, <&clks 187>, <&clks 105>; + clocks = <&clks IMX6QDL_CLK_SATA>, + <&clks IMX6QDL_CLK_SATA_REF_100M>, + <&clks IMX6QDL_CLK_AHB>; clock-names = "sata", "sata_ref", "ahb"; status = "disabled"; }; @@ -152,10 +158,20 @@ ipu2: ipu@02800000 { reg = <0x02800000 0x400000>; interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 7 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 133>, <&clks 134>, <&clks 137>; + clocks = <&clks IMX6QDL_CLK_IPU2>, + <&clks IMX6QDL_CLK_IPU2_DI0>, + <&clks IMX6QDL_CLK_IPU2_DI1>; clock-names = "bus", "di0", "di1"; resets = <&src 4>; + ipu2_csi0: port@0 { + reg = <0>; + }; + + ipu2_csi1: port@1 { + reg = <1>; + }; + ipu2_di0: port@2 { #address-cells = <1>; #size-cells = <0>; @@ -230,9 +246,10 @@ hdmi_mux_3: endpoint { }; &ldb { - clocks = <&clks 33>, <&clks 34>, - <&clks 39>, <&clks 40>, <&clks 41>, <&clks 42>, - <&clks 135>, <&clks 136>; + clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>, + <&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>, + <&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>; clock-names = "di0_pll", "di1_pll", "di0_sel", "di1_sel", "di2_sel", "di3_sel", "di0", "di1"; diff --git a/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..e6d9195a1da7bfb98260f0d2ca9bbd0f57de9374 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-aristainetos.dtsi @@ -0,0 +1,418 @@ +/* + * support fot the imx6 based aristainetos board + * + * Copyright (C) 2014 Heiko Schocher + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include + +/ { + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: regulator@2 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos_usbh1_vbus>; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usbotg_vbus: regulator@3 { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_aristainetos_usbotg_vbus>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + tmp103: tmp103@71 { + compatible = "ti,tmp103"; + reg = <0x71>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + rtc@68 { + compatible = "dallas,m41t00"; + reg = <0x68>; + }; +}; + +&ecspi4 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio3 20 0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi4>; + status = "okay"; + + flash: m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "micron,n25q128a11"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usbotg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + vmmc-supply = <®_3p3v>; + cd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + vmmc-supply = <®_3p3v>; + cd-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog &pinctrl_gpio>; + + imx6qdl-aristainetos { + pinctrl_aristainetos_usbh1_vbus: aristainetos-usbh1-vbus { + fsl,pins = ; + }; + + pinctrl_aristainetos_usbotg_vbus: aristainetos-usbotg-vbus { + fsl,pins = ; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x1b0b0 + >; + }; + + pinctrl_backlight: backlightgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0 + MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b0 + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x100b1 + >; + }; + + pinctrl_ecspi4: ecspi4grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 + MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 + MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b1 + MX6QDL_PAD_SD4_DAT7__GPIO2_IO15 0x1b0b0 /* WP pin */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_gpio: gpiogrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 + MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 + MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 + MX6QDL_PAD_SD4_DAT5__GPIO2_IO13 0x1b0b0 + MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x1b0b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 + MX6QDL_PAD_GPIO_6__GPIO1_IO06 0x1b0b0 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1 + MX6QDL_PAD_NANDF_CS1__NAND_CE1_B 0xb0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1 + MX6QDL_PAD_SD4_DAT0__NAND_DQS 0x00b1 + >; + }; + + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x10 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ipu_disp: ipudisp1grp { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x20000 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart4: uart4grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x17059 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x10059 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x17059 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x17059 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x17059 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x17059 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x1b0b0 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi index 744c8a2d81f6b715972fdd0ab77d35597c6d4d95..234e7b7552323b3461783c14d2cb820dba95207e 100644 --- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi @@ -121,9 +121,9 @@ reg_usb_otg_vbus: regulator@4 { }; sound { - compatible = "fsl,imx6q-sabrelite-sgtl5000", + compatible = "fsl,imx6q-ventana-sgtl5000", "fsl,imx-audio-sgtl5000"; - model = "imx6q-sabrelite-sgtl5000"; + model = "sgtl5000-audio"; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -489,7 +489,6 @@ &pwm4 { }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index adf150c1be90bd365b3060aaee71929d4b05007b..143f84f7812c93ff6f6ee87a5d3e9001254d613f 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -124,9 +124,9 @@ reg_usb_otg_vbus: regulator@4 { }; sound { - compatible = "fsl,imx6q-sabrelite-sgtl5000", + compatible = "fsl,imx6q-ventana-sgtl5000", "fsl,imx-audio-sgtl5000"; - model = "imx6q-sabrelite-sgtl5000"; + model = "sgtl5000-audio"; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -533,7 +533,6 @@ &pwm4 { }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 698d3063b29563691147510bb2dc9c2965999c1a..16e7ad3d98ad36b2d83808bdb2b2feb6b78c0a70 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -114,9 +114,9 @@ reg_usb_otg_vbus: regulator@3 { }; sound { - compatible = "fsl,imx6q-sabrelite-sgtl5000", + compatible = "fsl,imx6q-ventana-sgtl5000", "fsl,imx-audio-sgtl5000"; - model = "imx6q-sabrelite-sgtl5000"; + model = "sgtl5000-audio"; ssi-controller = <&ssi1>; audio-codec = <&codec>; audio-routing = @@ -555,12 +555,10 @@ &pwm4 { }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi index 4c4b17596c8b77329200c4c207ee68b13fc8de77..42ff525ebe13bf4c1e4e5a7db0aba7f0d3ff0722 100644 --- a/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi +++ b/arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi @@ -381,7 +381,6 @@ &pwm4 { }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index faa3494a69d4e314443ce6cbd9e58790f6b39cb1..2694aa84e18748b532a491b25f50fef0a2fc4a6d 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -301,6 +301,7 @@ &fec { pinctrl-0 = <&pinctrl_enet>; phy-mode = "rgmii"; phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + phy-supply = <&vdd_eth_io_reg>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..df7bcf86c156958c99c844ed09212643a576305d --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi @@ -0,0 +1,357 @@ +/* + * Copyright 2014 FEDEVEL, Inc. + * + * Author: Robert Nelson + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include +#include + +/ { + chosen { + stdout-path = &uart1; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3p3v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_usbh1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_led>; + + led0: usr { + label = "usr"; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + }; + + sound { + compatible = "fsl,imx6-rex-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "imx6-rex-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&codec>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&ecspi2 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&ecspi3 { + fsl,spi-num-chipselects = <1>; + cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi3>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + codec: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks 201>; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; + + eeprom@57 { + compatible = "at,24c02"; + reg = <0x57>; + }; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-rex { + pinctrl_hog: hoggrp { + fsl,pins = < + /* SGTL5000 sys_mclk */ + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x030b0 + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_ecspi2: ecspi2grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x000b1 + >; + }; + + pinctrl_ecspi3: ecspi3grp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1 + /* CS */ + MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x000b1 + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + /* Phy reset */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x000b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_led: ledgrp { + fsl,pins = < + /* user led */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbh1: usbh1grp { + fsl,pins = < + /* power enable, high active */ + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x10b0 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0 + /* power enable, high active */ + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x10b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + /* CD */ + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0 + /* WP */ + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1f0b0 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + /* CD */ + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x1b0b0 + /* WP */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1f0b0 + >; + }; + }; +}; + +&ssi1 { + fsl,mode = "i2s-slave"; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi index 6df6127bf83520252371d5b99d52296921b51c5b..0a36129152e0ced29635fe958e38aa2af6cc31b9 100644 --- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi @@ -381,7 +381,6 @@ &pwm4 { }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index 40ea36534643c84d7761c01a340df6fbef70e105..ec43dde7852522b6cdcaa901fe3a453c9a0f1ac7 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -340,6 +340,7 @@ pinctrl_ecspi1: ecspi1grp { MX6QDL_PAD_KEY_COL1__ECSPI1_MISO 0x100b1 MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI 0x100b1 MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0 >; }; @@ -512,7 +513,6 @@ &pwm1 { }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..f02b80b41d4fb94d9a5f690d9ddc6d89371e32f6 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi @@ -0,0 +1,696 @@ +/* + * Copyright 2014 Lothar Waßmann + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include + +/ { + aliases { + can0 = &can2; + can1 = &can1; + ethernet0 = &fec; + lcdif_23bit_pins_a = &pinctrl_disp0_1; + lcdif_24bit_pins_a = &pinctrl_disp0_2; + pwm0 = &pwm1; + pwm1 = &pwm2; + reg_can_xcvr = ®_can_xcvr; + stk5led = &user_led; + usbotg = &usbotg; + sdhc0 = &usdhc1; + sdhc1 = &usdhc2; + }; + + memory { + reg = <0 0>; /* will be filled by U-Boot */ + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + mclk: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <27000000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power Button"; + gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>; + linux,code = ; + gpio-key,wakeup; + }; + }; + + leds { + compatible = "gpio-leds"; + + user_led: user { + label = "Heartbeat"; + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_3v3_etn: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "3V3_ETN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_etnphy_power>; + gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_2v5: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "2V5"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + reg_3v3: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_can_xcvr: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "CAN XCVR"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan_xcvr>; + gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>; + enable-active-low; + }; + + reg_lcd0_pwr: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "LCD0 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd0_pwr>; + gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; + + reg_lcd1_pwr: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "LCD1 POWER"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd1_pwr>; + gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + regulator-always-on; + }; + + reg_usbh1_vbus: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "usbh1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_vbus>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usbotg_vbus: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "usbotg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg_vbus>; + gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + }; + + sound { + compatible = "karo,imx6qdl-tx6qdl-sgtl5000", + "fsl,imx-audio-sgtl5000"; + model = "sgtl5000-audio"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <5>; + }; +}; + +&audmux { + status = "okay"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + xceiver-supply = <®_can_xcvr>; + status = "okay"; +}; + +&ecspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + fsl,spi-num-chipselects = <2>; + cs-gpios = < + &gpio2 30 GPIO_ACTIVE_HIGH + &gpio3 19 GPIO_ACTIVE_HIGH + >; + status = "okay"; + + spidev0: spi@0 { + compatible = "spidev"; + reg = <0>; + spi-max-frequency = <54000000>; + }; + + spidev1: spi@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <54000000>; + }; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rmii"; + phy-reset-gpios = <&gpio7 6 GPIO_ACTIVE_HIGH>; + phy-supply = <®_3v3_etn>; + status = "okay"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + fsl,no-blockmark-swap; + status = "okay"; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + clock-frequency = <400000>; + status = "okay"; + + ds1339: rtc@68 { + compatible = "dallas,ds1339"; + reg = <0x68>; + }; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <400000>; + status = "okay"; + + sgtl5000: sgtl5000@0a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + VDDA-supply = <®_2v5>; + VDDIO-supply = <®_3v3>; + clocks = <&mclk>; + }; + + polytouch: edt-ft5x06@38 { + compatible = "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_edt_ft5x06>; + interrupt-parent = <&gpio6>; + interrupts = <15 0>; + reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + linux,wakeup; + }; + + touchscreen: tsc2007@48 { + compatible = "ti,tsc2007"; + reg = <0x48>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2007>; + interrupt-parent = <&gpio3>; + interrupts = <26 0>; + gpios = <&gpio3 26 GPIO_ACTIVE_LOW>; + ti,x-plate-ohms = <660>; + linux,wakeup; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-tx6 { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1 /* LED */ + MX6QDL_PAD_SD3_DAT2__GPIO7_IO06 0x1b0b1 /* ETN PHY RESET */ + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x1b0b1 /* ETN PHY INT */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1b0b1 /* PWR BTN */ + >; + }; + + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW1__AUD5_RXD 0x130b0 /* SSI1_RXD */ + MX6QDL_PAD_KEY_ROW0__AUD5_TXD 0x110b0 /* SSI1_TXD */ + MX6QDL_PAD_KEY_COL0__AUD5_TXC 0x130b0 /* SSI1_CLK */ + MX6QDL_PAD_KEY_COL1__AUD5_TXFS 0x130b0 /* SSI1_FS */ + >; + }; + + pinctrl_disp0_1: disp0grp-1 { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + /* PAD DISP0_DAT0 is used for the Flexcan transceiver control */ + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_disp0_2: disp0grp-2 { + fsl,pins = < + MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10 + MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x10 + MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x10 + MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x10 + MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x10 + MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x10 + MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x10 + MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x10 + MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x10 + MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x10 + MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x10 + MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x10 + MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x10 + MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x10 + MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x10 + MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x10 + MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x10 + MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x10 + MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x10 + MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x10 + MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x10 + MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x10 + MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0x10 + MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0x10 + MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0x10 + MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0x10 + MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0x10 + MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0x10 + >; + }; + + pinctrl_ecspi1: ecspi1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x0b0b0 + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x0b0b0 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x0b0b0 + MX6QDL_PAD_GPIO_19__ECSPI1_RDY 0x0b0b0 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x0b0b0 /* SPI CS0 */ + MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x0b0b0 /* SPI CS1 */ + >; + }; + + pinctrl_edt_ft5x06: edt-ft5x06grp { + fsl,pins = < + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x1b0b0 /* Interrupt */ + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b0 /* Reset */ + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0 /* Wake */ + >; + }; + + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + >; + }; + + pinctrl_etnphy_power: etnphy-pwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1 /* ETN PHY POWER */ + >; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan_xcvr: flexcan-xcvrgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0 /* Flexcan XCVR enable */ + >; + }; + + pinctrl_gpmi_nand: gpminandgrp { + fsl,pins = < + MX6QDL_PAD_NANDF_CLE__NAND_CLE 0x0b0b1 + MX6QDL_PAD_NANDF_ALE__NAND_ALE 0x0b0b1 + MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0x0b0b1 + MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0x0b000 + MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0x0b0b1 + MX6QDL_PAD_SD4_CMD__NAND_RE_B 0x0b0b1 + MX6QDL_PAD_SD4_CLK__NAND_WE_B 0x0b0b1 + MX6QDL_PAD_NANDF_D0__NAND_DATA00 0x0b0b1 + MX6QDL_PAD_NANDF_D1__NAND_DATA01 0x0b0b1 + MX6QDL_PAD_NANDF_D2__NAND_DATA02 0x0b0b1 + MX6QDL_PAD_NANDF_D3__NAND_DATA03 0x0b0b1 + MX6QDL_PAD_NANDF_D4__NAND_DATA04 0x0b0b1 + MX6QDL_PAD_NANDF_D5__NAND_DATA05 0x0b0b1 + MX6QDL_PAD_NANDF_D6__NAND_DATA06 0x0b0b1 + MX6QDL_PAD_NANDF_D7__NAND_DATA07 0x0b0b1 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_kpp: kppgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__KEY_COL6 0x1b0b1 + MX6QDL_PAD_GPIO_4__KEY_COL7 0x1b0b1 + MX6QDL_PAD_KEY_COL2__KEY_COL2 0x1b0b1 + MX6QDL_PAD_KEY_COL3__KEY_COL3 0x1b0b1 + MX6QDL_PAD_GPIO_2__KEY_ROW6 0x1b0b1 + MX6QDL_PAD_GPIO_5__KEY_ROW7 0x1b0b1 + MX6QDL_PAD_KEY_ROW2__KEY_ROW2 0x1b0b1 + MX6QDL_PAD_KEY_ROW3__KEY_ROW3 0x1b0b1 + >; + }; + + pinctrl_lcd0_pwr: lcd0-pwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1 /* LCD Reset */ + >; + }; + + pinctrl_lcd1_pwr: lcd1-pwrgrp { + fsl,pins = < + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x1b0b1 /* LCD Power Enable */ + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1 + >; + }; + + pinctrl_pwm2: pwm2grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1 + >; + }; + + pinctrl_tsc2007: tsc2007grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x1b0b0 /* Interrupt */ + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart1_rtscts: uart1_rtsctsgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT1__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_SD3_DAT0__UART1_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2_rtscts: uart2_rtsctsgrp { + fsl,pins = < + MX6QDL_PAD_SD4_DAT5__UART2_RTS_B 0x1b0b1 + MX6QDL_PAD_SD4_DAT6__UART2_CTS_B 0x1b0b1 + >; + }; + + pinctrl_uart3: uart3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart3_rtscts: uart3_rtsctsgrp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT3__UART3_CTS_B 0x1b0b1 + MX6QDL_PAD_SD3_RST__UART3_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usbh1_vbus: usbh1-vbusgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 /* USBH1_VBUSEN */ + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x17059 + >; + }; + + pinctrl_usbotg_vbus: usbotg-vbusgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0 /* USBOTG_VBUSEN */ + >; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = < + MX6QDL_PAD_SD1_CMD__SD1_CMD 0x070b1 + MX6QDL_PAD_SD1_CLK__SD1_CLK 0x070b1 + MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x070b1 + MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x070b1 + MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x070b1 + MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x070b1 + MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */ + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x070b1 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x070b1 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x070b1 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x070b1 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x070b1 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x070b1 + MX6QDL_PAD_SD3_CLK__GPIO7_IO03 0x170b0 /* SD2 CD */ + >; + }; + }; +}; + +&kpp { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_kpp>; + /* sample keymap */ + /* row/col 0,1 are mapped to KPP row/col 6,7 */ + linux,keymap = < + MATRIX_KEY(6, 6, KEY_POWER) /* 0x06060074 */ + MATRIX_KEY(6, 7, KEY_KP0) /* 0x06070052 */ + MATRIX_KEY(6, 2, KEY_KP1) /* 0x0602004f */ + MATRIX_KEY(6, 3, KEY_KP2) /* 0x06030050 */ + MATRIX_KEY(7, 6, KEY_KP3) /* 0x07060051 */ + MATRIX_KEY(7, 7, KEY_KP4) /* 0x0707004b */ + MATRIX_KEY(7, 2, KEY_KP5) /* 0x0702004c */ + MATRIX_KEY(7, 3, KEY_KP6) /* 0x0703004d */ + MATRIX_KEY(2, 6, KEY_KP7) /* 0x02060047 */ + MATRIX_KEY(2, 7, KEY_KP8) /* 0x02070048 */ + MATRIX_KEY(2, 2, KEY_KP9) /* 0x02020049 */ + >; + status = "okay"; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; + #pwm-cells = <3>; + status = "disabled"; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm2>; + #pwm-cells = <3>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2 &pinctrl_uart2_rtscts>; + status = "okay"; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3 &pinctrl_uart3_rtscts>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_usbh1_vbus>; + dr_mode = "host"; + disable-over-current; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_usbotg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + dr_mode = "peripheral"; + disable-over-current; + status = "okay"; +}; + +&usdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc1>; + bus-width = <4>; + no-1-8-v; + cd-gpios = <&gpio7 2 0>; + fsl,wp-controller; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + no-1-8-v; + cd-gpios = <&gpio7 3 0>; + fsl,wp-controller; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..ef7fa62b989861984773adfaa685f364024e6695 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revb1.dtsi @@ -0,0 +1,42 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include "imx6qdl-wandboard.dtsi" + +&iomuxc { + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-wandboard { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* GPIO_0_CLKO */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ + MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x0f0b0 /* WL_REF_ON */ + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x0f0b0 /* WL_RST_N */ + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x000b0 /* WL_REG_ON */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* RGMII_nRST */ + MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x80000000 /* BT_ON */ + MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x80000000 /* BT_WAKE */ + MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x80000000 /* BT_HOST_WAKE */ + >; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + non-removable; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..8d893a78cdf0c4dbbb44627de526c9aa81fd1d41 --- /dev/null +++ b/arch/arm/boot/dts/imx6qdl-wandboard-revc1.dtsi @@ -0,0 +1,41 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * Author: Fabio Estevam + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include "imx6qdl-wandboard.dtsi" + +&iomuxc { + pinctrl-0 = <&pinctrl_hog>; + + imx6qdl-wandboard { + pinctrl_hog: hoggrp { + fsl,pins = < + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* GPIO_0_CLKO */ + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* uSDHC1 CD */ + MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 /* uSDHC3 CD */ + MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x0f0b0 /* WIFI_ON (reset, active low) */ + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x000b0 /* WL_REG_ON (unused) */ + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE, input */ + MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x0f0b0 /* GPIO5_IO31 (Wifi Power Enable) */ + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE (unused) */ + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x80000000 /* BT_ON */ + MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x80000000 /* BT_WAKE */ + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x80000000 /* BT_HOST_WAKE */ + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 /* RGMII_nRST */ + >; + }; + }; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi index 5c6f10c43f65644bb4ab1367843fbf46918b90a9..5fb091675582e25b84026f5447d0be604f9266ac 100644 --- a/arch/arm/boot/dts/imx6qdl-wandboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-wandboard.dtsi @@ -91,22 +91,8 @@ codec: sgtl5000@0a { &iomuxc { pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_hog>; imx6qdl-wandboard { - pinctrl_hog: hoggrp { - fsl,pins = < - MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 - MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 - MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000 - MX6QDL_PAD_EIM_EB1__GPIO2_IO29 0x80000000 /* WL_REF_ON */ - MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000 /* WL_RST_N */ - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x80000000 /* WL_REG_ON */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* WL_HOST_WAKE */ - MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* WL_WAKE */ - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 - >; - }; pinctrl_audmux: audmuxgrp { fsl,pins = < @@ -233,7 +219,6 @@ &spdif { }; &ssi1 { - fsl,mode = "i2s-slave"; status = "okay"; }; @@ -269,13 +254,6 @@ &usdhc1 { status = "okay"; }; -&usdhc2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_usdhc2>; - non-removable; - status = "okay"; -}; - &usdhc3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc3>; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index ce0599134a699dd338b6f42adef8378e94a7d6e1..c701af9580067d287cc0bffbc0afe074c8ddab7d 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -10,6 +10,7 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include #include #include "skeleton.dtsi" @@ -94,7 +95,7 @@ dma_apbh: dma-apbh@00110000 { interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; #dma-cells = <1>; dma-channels = <4>; - clocks = <&clks 106>; + clocks = <&clks IMX6QDL_CLK_APBH_DMA>; }; gpmi: gpmi-nand@00112000 { @@ -105,8 +106,11 @@ gpmi: gpmi-nand@00112000 { reg-names = "gpmi-nand", "bch"; interrupts = <0 15 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "bch"; - clocks = <&clks 152>, <&clks 153>, <&clks 151>, - <&clks 150>, <&clks 149>; + clocks = <&clks IMX6QDL_CLK_GPMI_IO>, + <&clks IMX6QDL_CLK_GPMI_APB>, + <&clks IMX6QDL_CLK_GPMI_BCH>, + <&clks IMX6QDL_CLK_GPMI_BCH_APB>, + <&clks IMX6QDL_CLK_PER1_BCH>; clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch"; dmas = <&dma_apbh 0>; @@ -118,7 +122,7 @@ timer@00a00600 { compatible = "arm,cortex-a9-twd-timer"; reg = <0x00a00600 0x20>; interrupts = <1 13 0xf01>; - clocks = <&clks 15>; + clocks = <&clks IMX6QDL_CLK_TWD>; }; L2: l2-cache@00a02000 { @@ -149,7 +153,9 @@ pcie: pcie@0x01000000 { <0 0 0 2 &intc GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 3 &intc GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, <0 0 0 4 &intc GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 144>, <&clks 206>, <&clks 189>; + clocks = <&clks IMX6QDL_CLK_PCIE_AXI>, + <&clks IMX6QDL_CLK_LVDS1_GATE>, + <&clks IMX6QDL_CLK_PCIE_REF_125M>; clock-names = "pcie", "pcie_bus", "pcie_phy"; status = "disabled"; }; @@ -180,11 +186,11 @@ spdif: spdif@02004000 { dmas = <&sdma 14 18 0>, <&sdma 15 18 0>; dma-names = "rx", "tx"; - clocks = <&clks 197>, <&clks 3>, - <&clks 197>, <&clks 107>, - <&clks 0>, <&clks 118>, - <&clks 0>, <&clks 139>, - <&clks 0>; + clocks = <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_OSC>, + <&clks IMX6QDL_CLK_SPDIF>, <&clks IMX6QDL_CLK_DUMMY>, + <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>, + <&clks IMX6QDL_CLK_DUMMY>, <&clks IMX6QDL_CLK_DUMMY>, + <&clks IMX6QDL_CLK_DUMMY>; clock-names = "core", "rxtx0", "rxtx1", "rxtx2", "rxtx3", "rxtx4", @@ -199,7 +205,8 @@ ecspi1: ecspi@02008000 { compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02008000 0x4000>; interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 112>, <&clks 112>; + clocks = <&clks IMX6QDL_CLK_ECSPI1>, + <&clks IMX6QDL_CLK_ECSPI1>; clock-names = "ipg", "per"; dmas = <&sdma 3 7 1>, <&sdma 4 7 2>; dma-names = "rx", "tx"; @@ -212,7 +219,8 @@ ecspi2: ecspi@0200c000 { compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x0200c000 0x4000>; interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 113>, <&clks 113>; + clocks = <&clks IMX6QDL_CLK_ECSPI2>, + <&clks IMX6QDL_CLK_ECSPI2>; clock-names = "ipg", "per"; dmas = <&sdma 5 7 1>, <&sdma 6 7 2>; dma-names = "rx", "tx"; @@ -225,7 +233,8 @@ ecspi3: ecspi@02010000 { compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02010000 0x4000>; interrupts = <0 33 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 114>, <&clks 114>; + clocks = <&clks IMX6QDL_CLK_ECSPI3>, + <&clks IMX6QDL_CLK_ECSPI3>; clock-names = "ipg", "per"; dmas = <&sdma 7 7 1>, <&sdma 8 7 2>; dma-names = "rx", "tx"; @@ -238,7 +247,8 @@ ecspi4: ecspi@02014000 { compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi"; reg = <0x02014000 0x4000>; interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 115>, <&clks 115>; + clocks = <&clks IMX6QDL_CLK_ECSPI4>, + <&clks IMX6QDL_CLK_ECSPI4>; clock-names = "ipg", "per"; dmas = <&sdma 9 7 1>, <&sdma 10 7 2>; dma-names = "rx", "tx"; @@ -249,7 +259,8 @@ uart1: serial@02020000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x02020000 0x4000>; interrupts = <0 26 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 160>, <&clks 161>; + clocks = <&clks IMX6QDL_CLK_UART_IPG>, + <&clks IMX6QDL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; dma-names = "rx", "tx"; @@ -263,46 +274,40 @@ esai: esai@02024000 { ssi1: ssi@02028000 { compatible = "fsl,imx6q-ssi", - "fsl,imx51-ssi", - "fsl,imx21-ssi"; + "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 178>; + clocks = <&clks IMX6QDL_CLK_SSI1_IPG>; dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <38 37>; status = "disabled"; }; ssi2: ssi@0202c000 { compatible = "fsl,imx6q-ssi", - "fsl,imx51-ssi", - "fsl,imx21-ssi"; + "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 179>; + clocks = <&clks IMX6QDL_CLK_SSI2_IPG>; dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <42 41>; status = "disabled"; }; ssi3: ssi@02030000 { compatible = "fsl,imx6q-ssi", - "fsl,imx51-ssi", - "fsl,imx21-ssi"; + "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 180>; + clocks = <&clks IMX6QDL_CLK_SSI3_IPG>; dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; dma-names = "rx", "tx"; fsl,fifo-depth = <15>; - fsl,ssi-dma-events = <46 45>; status = "disabled"; }; @@ -331,7 +336,8 @@ pwm1: pwm@02080000 { compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02080000 0x4000>; interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 62>, <&clks 145>; + clocks = <&clks IMX6QDL_CLK_IPG>, + <&clks IMX6QDL_CLK_PWM1>; clock-names = "ipg", "per"; }; @@ -340,7 +346,8 @@ pwm2: pwm@02084000 { compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02084000 0x4000>; interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 62>, <&clks 146>; + clocks = <&clks IMX6QDL_CLK_IPG>, + <&clks IMX6QDL_CLK_PWM2>; clock-names = "ipg", "per"; }; @@ -349,7 +356,8 @@ pwm3: pwm@02088000 { compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x02088000 0x4000>; interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 62>, <&clks 147>; + clocks = <&clks IMX6QDL_CLK_IPG>, + <&clks IMX6QDL_CLK_PWM3>; clock-names = "ipg", "per"; }; @@ -358,7 +366,8 @@ pwm4: pwm@0208c000 { compatible = "fsl,imx6q-pwm", "fsl,imx27-pwm"; reg = <0x0208c000 0x4000>; interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 62>, <&clks 148>; + clocks = <&clks IMX6QDL_CLK_IPG>, + <&clks IMX6QDL_CLK_PWM4>; clock-names = "ipg", "per"; }; @@ -366,7 +375,8 @@ can1: flexcan@02090000 { compatible = "fsl,imx6q-flexcan"; reg = <0x02090000 0x4000>; interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 108>, <&clks 109>; + clocks = <&clks IMX6QDL_CLK_CAN1_IPG>, + <&clks IMX6QDL_CLK_CAN1_SERIAL>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -375,7 +385,8 @@ can2: flexcan@02094000 { compatible = "fsl,imx6q-flexcan"; reg = <0x02094000 0x4000>; interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 110>, <&clks 111>; + clocks = <&clks IMX6QDL_CLK_CAN2_IPG>, + <&clks IMX6QDL_CLK_CAN2_SERIAL>; clock-names = "ipg", "per"; status = "disabled"; }; @@ -384,7 +395,8 @@ gpt: gpt@02098000 { compatible = "fsl,imx6q-gpt", "fsl,imx31-gpt"; reg = <0x02098000 0x4000>; interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 119>, <&clks 120>; + clocks = <&clks IMX6QDL_CLK_GPT_IPG>, + <&clks IMX6QDL_CLK_GPT_IPG_PER>; clock-names = "ipg", "per"; }; @@ -466,22 +478,25 @@ gpio7: gpio@020b4000 { }; kpp: kpp@020b8000 { + compatible = "fsl,imx6q-kpp", "fsl,imx21-kpp"; reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_IPG>; + status = "disabled"; }; wdog1: wdog@020bc000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020bc000 0x4000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 0>; + clocks = <&clks IMX6QDL_CLK_DUMMY>; }; wdog2: wdog@020c0000 { compatible = "fsl,imx6q-wdt", "fsl,imx21-wdt"; reg = <0x020c0000 0x4000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 0>; + clocks = <&clks IMX6QDL_CLK_DUMMY>; status = "disabled"; }; @@ -599,14 +614,14 @@ tempmon: tempmon { interrupts = <0 49 IRQ_TYPE_LEVEL_HIGH>; fsl,tempmon = <&anatop>; fsl,tempmon-data = <&ocotp>; - clocks = <&clks 172>; + clocks = <&clks IMX6QDL_CLK_PLL3_USB_OTG>; }; usbphy1: usbphy@020c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 182>; + clocks = <&clks IMX6QDL_CLK_USBPHY1>; fsl,anatop = <&anatop>; }; @@ -614,7 +629,7 @@ usbphy2: usbphy@020ca000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020ca000 0x1000>; interrupts = <0 45 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 183>; + clocks = <&clks IMX6QDL_CLK_USBPHY2>; fsl,anatop = <&anatop>; }; @@ -727,7 +742,8 @@ hdmi: hdmi@0120000 { reg = <0x00120000 0x9000>; interrupts = <0 115 0x04>; gpr = <&gpr>; - clocks = <&clks 123>, <&clks 124>; + clocks = <&clks IMX6QDL_CLK_HDMI_IAHB>, + <&clks IMX6QDL_CLK_HDMI_ISFR>; clock-names = "iahb", "isfr"; status = "disabled"; @@ -762,7 +778,8 @@ sdma: sdma@020ec000 { compatible = "fsl,imx6q-sdma", "fsl,imx35-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 155>, <&clks 155>; + clocks = <&clks IMX6QDL_CLK_SDMA>, + <&clks IMX6QDL_CLK_SDMA>; clock-names = "ipg", "ahb"; #dma-cells = <3>; fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; @@ -790,7 +807,7 @@ usbotg: usb@02184000 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184000 0x200>; interrupts = <0 43 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 162>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbphy = <&usbphy1>; fsl,usbmisc = <&usbmisc 0>; status = "disabled"; @@ -800,7 +817,7 @@ usbh1: usb@02184200 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184200 0x200>; interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 162>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbphy = <&usbphy2>; fsl,usbmisc = <&usbmisc 1>; status = "disabled"; @@ -810,7 +827,7 @@ usbh2: usb@02184400 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184400 0x200>; interrupts = <0 41 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 162>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 2>; status = "disabled"; }; @@ -819,7 +836,7 @@ usbh3: usb@02184600 { compatible = "fsl,imx6q-usb", "fsl,imx27-usb"; reg = <0x02184600 0x200>; interrupts = <0 42 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 162>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; fsl,usbmisc = <&usbmisc 3>; status = "disabled"; }; @@ -828,7 +845,7 @@ usbmisc: usbmisc@02184800 { #index-cells = <1>; compatible = "fsl,imx6q-usbmisc"; reg = <0x02184800 0x200>; - clocks = <&clks 162>; + clocks = <&clks IMX6QDL_CLK_USBOH3>; }; fec: ethernet@02188000 { @@ -837,7 +854,9 @@ fec: ethernet@02188000 { interrupts-extended = <&intc 0 118 IRQ_TYPE_LEVEL_HIGH>, <&intc 0 119 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 117>, <&clks 117>, <&clks 190>; + clocks = <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET>, + <&clks IMX6QDL_CLK_ENET_REF>; clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; @@ -853,7 +872,9 @@ usdhc1: usdhc@02190000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02190000 0x4000>; interrupts = <0 22 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 163>, <&clks 163>, <&clks 163>; + clocks = <&clks IMX6QDL_CLK_USDHC1>, + <&clks IMX6QDL_CLK_USDHC1>, + <&clks IMX6QDL_CLK_USDHC1>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -863,7 +884,9 @@ usdhc2: usdhc@02194000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02194000 0x4000>; interrupts = <0 23 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 164>, <&clks 164>, <&clks 164>; + clocks = <&clks IMX6QDL_CLK_USDHC2>, + <&clks IMX6QDL_CLK_USDHC2>, + <&clks IMX6QDL_CLK_USDHC2>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -873,7 +896,9 @@ usdhc3: usdhc@02198000 { compatible = "fsl,imx6q-usdhc"; reg = <0x02198000 0x4000>; interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 165>, <&clks 165>, <&clks 165>; + clocks = <&clks IMX6QDL_CLK_USDHC3>, + <&clks IMX6QDL_CLK_USDHC3>, + <&clks IMX6QDL_CLK_USDHC3>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -883,7 +908,9 @@ usdhc4: usdhc@0219c000 { compatible = "fsl,imx6q-usdhc"; reg = <0x0219c000 0x4000>; interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 166>, <&clks 166>, <&clks 166>; + clocks = <&clks IMX6QDL_CLK_USDHC4>, + <&clks IMX6QDL_CLK_USDHC4>, + <&clks IMX6QDL_CLK_USDHC4>; clock-names = "ipg", "ahb", "per"; bus-width = <4>; status = "disabled"; @@ -895,7 +922,7 @@ i2c1: i2c@021a0000 { compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a0000 0x4000>; interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 125>; + clocks = <&clks IMX6QDL_CLK_I2C1>; status = "disabled"; }; @@ -905,7 +932,7 @@ i2c2: i2c@021a4000 { compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a4000 0x4000>; interrupts = <0 37 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 126>; + clocks = <&clks IMX6QDL_CLK_I2C2>; status = "disabled"; }; @@ -915,7 +942,7 @@ i2c3: i2c@021a8000 { compatible = "fsl,imx6q-i2c", "fsl,imx21-i2c"; reg = <0x021a8000 0x4000>; interrupts = <0 38 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 127>; + clocks = <&clks IMX6QDL_CLK_I2C3>; status = "disabled"; }; @@ -936,7 +963,7 @@ weim: weim@021b8000 { compatible = "fsl,imx6q-weim"; reg = <0x021b8000 0x4000>; interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 196>; + clocks = <&clks IMX6QDL_CLK_EIM_SLOW>; }; ocotp: ocotp@021bc000 { @@ -996,7 +1023,8 @@ uart2: serial@021e8000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021e8000 0x4000>; interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 160>, <&clks 161>; + clocks = <&clks IMX6QDL_CLK_UART_IPG>, + <&clks IMX6QDL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; dma-names = "rx", "tx"; @@ -1007,7 +1035,8 @@ uart3: serial@021ec000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021ec000 0x4000>; interrupts = <0 28 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 160>, <&clks 161>; + clocks = <&clks IMX6QDL_CLK_UART_IPG>, + <&clks IMX6QDL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; dma-names = "rx", "tx"; @@ -1018,7 +1047,8 @@ uart4: serial@021f0000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f0000 0x4000>; interrupts = <0 29 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 160>, <&clks 161>; + clocks = <&clks IMX6QDL_CLK_UART_IPG>, + <&clks IMX6QDL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; dma-names = "rx", "tx"; @@ -1029,7 +1059,8 @@ uart5: serial@021f4000 { compatible = "fsl,imx6q-uart", "fsl,imx21-uart"; reg = <0x021f4000 0x4000>; interrupts = <0 30 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 160>, <&clks 161>; + clocks = <&clks IMX6QDL_CLK_UART_IPG>, + <&clks IMX6QDL_CLK_UART_SERIAL>; clock-names = "ipg", "per"; dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; dma-names = "rx", "tx"; @@ -1044,10 +1075,20 @@ ipu1: ipu@02400000 { reg = <0x02400000 0x400000>; interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>, <0 5 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks 130>, <&clks 131>, <&clks 132>; + clocks = <&clks IMX6QDL_CLK_IPU1>, + <&clks IMX6QDL_CLK_IPU1_DI0>, + <&clks IMX6QDL_CLK_IPU1_DI1>; clock-names = "bus", "di0", "di1"; resets = <&src 2>; + ipu1_csi0: port@0 { + reg = <0>; + }; + + ipu1_csi1: port@1 { + reg = <1>; + }; + ipu1_di0: port@2 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index a8d9a93fab85fd5031eb8c164fc676823392e0b2..3f9e041c0252178c005b75387de9c20a58d58426 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -116,8 +116,9 @@ flash: m25p80@0 { }; &fec { - pinctrl-names = "default"; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&pinctrl_fec>; + pinctrl-1 = <&pinctrl_fec_sleep>; phy-mode = "rmii"; status = "okay"; }; @@ -300,6 +301,19 @@ MX6SL_PAD_FEC_REF_CLK__FEC_REF_OUT 0x4001b0a8 >; }; + pinctrl_fec_sleep: fecgrp-sleep { + fsl,pins = < + MX6SL_PAD_FEC_MDC__GPIO4_IO23 0x3080 + MX6SL_PAD_FEC_CRS_DV__GPIO4_IO25 0x3080 + MX6SL_PAD_FEC_RXD0__GPIO4_IO17 0x3080 + MX6SL_PAD_FEC_RXD1__GPIO4_IO18 0x3080 + MX6SL_PAD_FEC_TX_EN__GPIO4_IO22 0x3080 + MX6SL_PAD_FEC_TXD0__GPIO4_IO24 0x3080 + MX6SL_PAD_FEC_TXD1__GPIO4_IO16 0x3080 + MX6SL_PAD_FEC_REF_CLK__GPIO4_IO26 0x3080 + >; + }; + pinctrl_i2c1: i2c1grp { fsl,pins = < MX6SL_PAD_I2C1_SCL__I2C1_SCL 0x4001b8b1 @@ -475,7 +489,6 @@ MATRIX_KEY(0x2, 0x1, KEY_VOLUMEUP) /* ROW2, COL1 */ }; &ssi2 { - fsl,mode = "i2s-slave"; status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index 57d4abe03a94f55180e6c6bf01f5919657fd9408..c75800ca8b355fbdf2da2d3ee62e346078948811 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -227,8 +227,7 @@ uart2: serial@02024000 { ssi1: ssi@02028000 { compatible = "fsl,imx6sl-ssi", - "fsl,imx51-ssi", - "fsl,imx21-ssi"; + "fsl,imx51-ssi"; reg = <0x02028000 0x4000>; interrupts = <0 46 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_SSI1>; @@ -241,8 +240,7 @@ ssi1: ssi@02028000 { ssi2: ssi@0202c000 { compatible = "fsl,imx6sl-ssi", - "fsl,imx51-ssi", - "fsl,imx21-ssi"; + "fsl,imx51-ssi"; reg = <0x0202c000 0x4000>; interrupts = <0 47 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_SSI2>; @@ -255,8 +253,7 @@ ssi2: ssi@0202c000 { ssi3: ssi@02030000 { compatible = "fsl,imx6sl-ssi", - "fsl,imx51-ssi", - "fsl,imx21-ssi"; + "fsl,imx51-ssi"; reg = <0x02030000 0x4000>; interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_SSI3>; @@ -403,6 +400,7 @@ kpp: kpp@020b8000 { reg = <0x020b8000 0x4000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_DUMMY>; + status = "disabled"; }; wdog1: wdog@020bc000 { @@ -607,7 +605,7 @@ spdc: spdc@020e8000 { }; sdma: sdma@020ec000 { - compatible = "fsl,imx6sl-sdma", "fsl,imx35-sdma"; + compatible = "fsl,imx6sl-sdma", "fsl,imx6q-sdma"; reg = <0x020ec000 0x4000>; interrupts = <0 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&clks IMX6SL_CLK_SDMA>, diff --git a/arch/arm/boot/dts/imx6sx-pinfunc.h b/arch/arm/boot/dts/imx6sx-pinfunc.h new file mode 100644 index 0000000000000000000000000000000000000000..3e0b816dac08ff368ef6259d2d67e72df7011bf9 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-pinfunc.h @@ -0,0 +1,1544 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef __DTS_IMX6SX_PINFUNC_H +#define __DTS_IMX6SX_PINFUNC_H + +/* + * The pin function ID is a tuple of + * + */ +#define MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x0014 0x035C 0x07A8 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO00__USDHC1_VSELECT 0x0014 0x035C 0x0000 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO00__SPDIF_LOCK 0x0014 0x035C 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO00__CCM_WAIT 0x0014 0x035C 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO00__WDOG1_WDOG_ANY 0x0014 0x035C 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO00__GPIO1_IO_0 0x0014 0x035C 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO00__SNVS_HP_WRAPPER_VIO_5 0x0014 0x035C 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO00__PHY_DTB_1 0x0014 0x035C 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x0018 0x0360 0x07AC 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO01__USDHC1_RESET_B 0x0018 0x0360 0x0000 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO01__SPDIF_SR_CLK 0x0018 0x0360 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO01__CCM_STOP 0x0018 0x0360 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO01__WDOG3_WDOG_B 0x0018 0x0360 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO01__GPIO1_IO_1 0x0018 0x0360 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO01__SNVS_HP_WRAPPER_VIO_5_CTL 0x0018 0x0360 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO01__PHY_DTB_0 0x0018 0x0360 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO02__I2C2_SCL 0x001C 0x0364 0x07B0 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO02__USDHC1_CD_B 0x001C 0x0364 0x0864 0x1 0x1 +#define MX6SX_PAD_GPIO1_IO02__CSI2_MCLK 0x001C 0x0364 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO02__CCM_DI0_EXT_CLK 0x001C 0x0364 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO02__WDOG1_WDOG_B 0x001C 0x0364 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO02__GPIO1_IO_2 0x001C 0x0364 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO02__CCM_REF_EN_B 0x001C 0x0364 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO02__PHY_TDI 0x001C 0x0364 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO03__I2C2_SDA 0x0020 0x0368 0x07B4 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO03__USDHC1_WP 0x0020 0x0368 0x0868 0x1 0x1 +#define MX6SX_PAD_GPIO1_IO03__ENET1_REF_CLK_25M 0x0020 0x0368 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO03__CCM_DI1_EXT_CLK 0x0020 0x0368 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO03__WDOG2_WDOG_B 0x0020 0x0368 0x0000 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO03__GPIO1_IO_3 0x0020 0x0368 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO03__CCM_PLL3_BYP 0x0020 0x0368 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO03__PHY_TCK 0x0020 0x0368 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO04__UART1_RX 0x0024 0x036C 0x0830 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO04__UART1_TX 0x0024 0x036C 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO04__USDHC2_RESET_B 0x0024 0x036C 0x0000 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO04__ENET1_MDC 0x0024 0x036C 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO04__OSC32K_32K_OUT 0x0024 0x036C 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO04__ENET2_REF_CLK2 0x0024 0x036C 0x076C 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO04__GPIO1_IO_4 0x0024 0x036C 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO04__CCM_PLL2_BYP 0x0024 0x036C 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO04__PHY_TMS 0x0024 0x036C 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO05__UART1_RX 0x0028 0x0370 0x0830 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO05__UART1_TX 0x0028 0x0370 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO05__USDHC2_VSELECT 0x0028 0x0370 0x0000 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO05__ENET1_MDIO 0x0028 0x0370 0x0764 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO05__ASRC_ASRC_EXT_CLK 0x0028 0x0370 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO05__ENET1_REF_CLK1 0x0028 0x0370 0x0760 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO05__GPIO1_IO_5 0x0028 0x0370 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO05__SRC_TESTER_ACK 0x0028 0x0370 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO05__PHY_TDO 0x0028 0x0370 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART2_RX 0x002C 0x0374 0x0838 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART2_TX 0x002C 0x0374 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO06__USDHC2_CD_B 0x002C 0x0374 0x086C 0x1 0x1 +#define MX6SX_PAD_GPIO1_IO06__ENET2_MDC 0x002C 0x0374 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO06__CSI1_MCLK 0x002C 0x0374 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO06__UART1_RTS_B 0x002C 0x0374 0x082C 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO06__GPIO1_IO_6 0x002C 0x0374 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO06__SRC_ANY_PU_RESET 0x002C 0x0374 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO06__OCOTP_CTRL_WRAPPER_FUSE_LATCHED 0x002C 0x0374 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO07__UART2_RX 0x0030 0x0378 0x0838 0x0 0x1 +#define MX6SX_PAD_GPIO1_IO07__UART2_TX 0x0030 0x0378 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO07__USDHC2_WP 0x0030 0x0378 0x0870 0x1 0x1 +#define MX6SX_PAD_GPIO1_IO07__ENET2_MDIO 0x0030 0x0378 0x0770 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO07__AUDMUX_MCLK 0x0030 0x0378 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO07__UART1_CTS_B 0x0030 0x0378 0x082C 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO07__GPIO1_IO_7 0x0030 0x0378 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO07__SRC_EARLY_RESET 0x0030 0x0378 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO07__DCIC2_OUT 0x0030 0x0378 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO07__VDEC_DEBUG_44 0x0030 0x0378 0x0000 0x8 0x0 +#define MX6SX_PAD_GPIO1_IO08__USB_OTG1_OC 0x0034 0x037C 0x0860 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO08__WDOG1_WDOG_B 0x0034 0x037C 0x0000 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO08__SDMA_EXT_EVENT_0 0x0034 0x037C 0x081C 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO08__CCM_PMIC_RDY 0x0034 0x037C 0x069C 0x3 0x1 +#define MX6SX_PAD_GPIO1_IO08__UART2_RTS_B 0x0034 0x037C 0x0834 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO08__GPIO1_IO_8 0x0034 0x037C 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO08__SRC_SYSTEM_RESET 0x0034 0x037C 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO08__DCIC1_OUT 0x0034 0x037C 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO08__VDEC_DEBUG_43 0x0034 0x037C 0x0000 0x8 0x0 +#define MX6SX_PAD_GPIO1_IO09__USB_OTG1_PWR 0x0038 0x0380 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO09__WDOG2_WDOG_B 0x0038 0x0380 0x0000 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO09__SDMA_EXT_EVENT_1 0x0038 0x0380 0x0820 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO09__CCM_OUT0 0x0038 0x0380 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO09__UART2_CTS_B 0x0038 0x0380 0x0834 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x0038 0x0380 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO09__SRC_INT_BOOT 0x0038 0x0380 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO09__OBSERVE_MUX_OUT_4 0x0038 0x0380 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO09__VDEC_DEBUG_42 0x0038 0x0380 0x0000 0x8 0x0 +#define MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x003C 0x0384 0x0624 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO10__SPDIF_EXT_CLK 0x003C 0x0384 0x0828 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO10__PWM1_OUT 0x003C 0x0384 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO10__CCM_OUT1 0x003C 0x0384 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO10__CSI1_FIELD 0x003C 0x0384 0x070C 0x4 0x1 +#define MX6SX_PAD_GPIO1_IO10__GPIO1_IO_10 0x003C 0x0384 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO10__CSU_CSU_INT_DEB 0x003C 0x0384 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO10__OBSERVE_MUX_OUT_3 0x003C 0x0384 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO10__VDEC_DEBUG_41 0x003C 0x0384 0x0000 0x8 0x0 +#define MX6SX_PAD_GPIO1_IO11__USB_OTG2_OC 0x0040 0x0388 0x085C 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO11__SPDIF_IN 0x0040 0x0388 0x0824 0x1 0x2 +#define MX6SX_PAD_GPIO1_IO11__PWM2_OUT 0x0040 0x0388 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO11__CCM_CLKO1 0x0040 0x0388 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO11__MLB_DATA 0x0040 0x0388 0x07EC 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO11__GPIO1_IO_11 0x0040 0x0388 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO11__CSU_CSU_ALARM_AUT_0 0x0040 0x0388 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO11__OBSERVE_MUX_OUT_2 0x0040 0x0388 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO11__VDEC_DEBUG_40 0x0040 0x0388 0x0000 0x8 0x0 +#define MX6SX_PAD_GPIO1_IO12__USB_OTG2_PWR 0x0044 0x038C 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO12__SPDIF_OUT 0x0044 0x038C 0x0000 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO12__PWM3_OUT 0x0044 0x038C 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO12__CCM_CLKO2 0x0044 0x038C 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO12__MLB_CLK 0x0044 0x038C 0x07E8 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x0044 0x038C 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO12__CSU_CSU_ALARM_AUT_1 0x0044 0x038C 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO12__OBSERVE_MUX_OUT_1 0x0044 0x038C 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO12__VDEC_DEBUG_39 0x0044 0x038C 0x0000 0x8 0x0 +#define MX6SX_PAD_GPIO1_IO13__WDOG1_WDOG_ANY 0x0048 0x0390 0x0000 0x0 0x0 +#define MX6SX_PAD_GPIO1_IO13__ANATOP_OTG2_ID 0x0048 0x0390 0x0628 0x1 0x0 +#define MX6SX_PAD_GPIO1_IO13__PWM4_OUT 0x0048 0x0390 0x0000 0x2 0x0 +#define MX6SX_PAD_GPIO1_IO13__CCM_OUT2 0x0048 0x0390 0x0000 0x3 0x0 +#define MX6SX_PAD_GPIO1_IO13__MLB_SIG 0x0048 0x0390 0x07F0 0x4 0x0 +#define MX6SX_PAD_GPIO1_IO13__GPIO1_IO_13 0x0048 0x0390 0x0000 0x5 0x0 +#define MX6SX_PAD_GPIO1_IO13__CSU_CSU_ALARM_AUT_2 0x0048 0x0390 0x0000 0x6 0x0 +#define MX6SX_PAD_GPIO1_IO13__OBSERVE_MUX_OUT_0 0x0048 0x0390 0x0000 0x7 0x0 +#define MX6SX_PAD_GPIO1_IO13__VDEC_DEBUG_38 0x0048 0x0390 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA00__CSI1_DATA_2 0x004C 0x0394 0x06A8 0x0 0x0 +#define MX6SX_PAD_CSI_DATA00__ESAI_TX_CLK 0x004C 0x0394 0x078C 0x1 0x1 +#define MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x004C 0x0394 0x0684 0x2 0x1 +#define MX6SX_PAD_CSI_DATA00__I2C1_SCL 0x004C 0x0394 0x07A8 0x3 0x0 +#define MX6SX_PAD_CSI_DATA00__UART6_RI_B 0x004C 0x0394 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA00__GPIO1_IO_14 0x004C 0x0394 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA00__WEIM_DATA_23 0x004C 0x0394 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA00__SAI1_TX_BCLK 0x004C 0x0394 0x0800 0x7 0x0 +#define MX6SX_PAD_CSI_DATA00__VADC_DATA_4 0x004C 0x0394 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA00__MMDC_DEBUG_37 0x004C 0x0394 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_DATA01__CSI1_DATA_3 0x0050 0x0398 0x06AC 0x0 0x0 +#define MX6SX_PAD_CSI_DATA01__ESAI_TX_FS 0x0050 0x0398 0x077C 0x1 0x1 +#define MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x0050 0x0398 0x0688 0x2 0x1 +#define MX6SX_PAD_CSI_DATA01__I2C1_SDA 0x0050 0x0398 0x07AC 0x3 0x0 +#define MX6SX_PAD_CSI_DATA01__UART6_DSR_B 0x0050 0x0398 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA01__GPIO1_IO_15 0x0050 0x0398 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA01__WEIM_DATA_22 0x0050 0x0398 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA01__SAI1_TX_SYNC 0x0050 0x0398 0x0804 0x7 0x0 +#define MX6SX_PAD_CSI_DATA01__VADC_DATA_5 0x0050 0x0398 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA01__MMDC_DEBUG_38 0x0050 0x0398 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_DATA02__CSI1_DATA_4 0x0054 0x039C 0x06B0 0x0 0x0 +#define MX6SX_PAD_CSI_DATA02__ESAI_RX_CLK 0x0054 0x039C 0x0788 0x1 0x1 +#define MX6SX_PAD_CSI_DATA02__AUDMUX_AUD6_RXC 0x0054 0x039C 0x067C 0x2 0x1 +#define MX6SX_PAD_CSI_DATA02__KPP_COL_5 0x0054 0x039C 0x07C8 0x3 0x0 +#define MX6SX_PAD_CSI_DATA02__UART6_DTR_B 0x0054 0x039C 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA02__GPIO1_IO_16 0x0054 0x039C 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA02__WEIM_DATA_21 0x0054 0x039C 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA02__SAI1_RX_BCLK 0x0054 0x039C 0x07F4 0x7 0x0 +#define MX6SX_PAD_CSI_DATA02__VADC_DATA_6 0x0054 0x039C 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA02__MMDC_DEBUG_39 0x0054 0x039C 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_DATA03__CSI1_DATA_5 0x0058 0x03A0 0x06B4 0x0 0x0 +#define MX6SX_PAD_CSI_DATA03__ESAI_RX_FS 0x0058 0x03A0 0x0778 0x1 0x1 +#define MX6SX_PAD_CSI_DATA03__AUDMUX_AUD6_RXFS 0x0058 0x03A0 0x0680 0x2 0x1 +#define MX6SX_PAD_CSI_DATA03__KPP_ROW_5 0x0058 0x03A0 0x07D4 0x3 0x0 +#define MX6SX_PAD_CSI_DATA03__UART6_DCD_B 0x0058 0x03A0 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA03__GPIO1_IO_17 0x0058 0x03A0 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA03__WEIM_DATA_20 0x0058 0x03A0 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA03__SAI1_RX_SYNC 0x0058 0x03A0 0x07FC 0x7 0x0 +#define MX6SX_PAD_CSI_DATA03__VADC_DATA_7 0x0058 0x03A0 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA03__MMDC_DEBUG_40 0x0058 0x03A0 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_DATA04__CSI1_DATA_6 0x005C 0x03A4 0x06B8 0x0 0x0 +#define MX6SX_PAD_CSI_DATA04__ESAI_TX1 0x005C 0x03A4 0x0794 0x1 0x1 +#define MX6SX_PAD_CSI_DATA04__SPDIF_OUT 0x005C 0x03A4 0x0000 0x2 0x0 +#define MX6SX_PAD_CSI_DATA04__KPP_COL_6 0x005C 0x03A4 0x07CC 0x3 0x0 +#define MX6SX_PAD_CSI_DATA04__UART6_RX 0x005C 0x03A4 0x0858 0x4 0x0 +#define MX6SX_PAD_CSI_DATA04__UART6_TX 0x005C 0x03A4 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x005C 0x03A4 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA04__WEIM_DATA_19 0x005C 0x03A4 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA04__PWM5_OUT 0x005C 0x03A4 0x0000 0x7 0x0 +#define MX6SX_PAD_CSI_DATA04__VADC_DATA_8 0x005C 0x03A4 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA04__MMDC_DEBUG_41 0x005C 0x03A4 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_DATA05__CSI1_DATA_7 0x0060 0x03A8 0x06BC 0x0 0x0 +#define MX6SX_PAD_CSI_DATA05__ESAI_TX4_RX1 0x0060 0x03A8 0x07A0 0x1 0x1 +#define MX6SX_PAD_CSI_DATA05__SPDIF_IN 0x0060 0x03A8 0x0824 0x2 0x1 +#define MX6SX_PAD_CSI_DATA05__KPP_ROW_6 0x0060 0x03A8 0x07D8 0x3 0x0 +#define MX6SX_PAD_CSI_DATA05__UART6_RX 0x0060 0x03A8 0x0858 0x4 0x1 +#define MX6SX_PAD_CSI_DATA05__UART6_TX 0x0060 0x03A8 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x0060 0x03A8 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA05__WEIM_DATA_18 0x0060 0x03A8 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA05__PWM6_OUT 0x0060 0x03A8 0x0000 0x7 0x0 +#define MX6SX_PAD_CSI_DATA05__VADC_DATA_9 0x0060 0x03A8 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA05__MMDC_DEBUG_42 0x0060 0x03A8 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_DATA06__CSI1_DATA_8 0x0064 0x03AC 0x06C0 0x0 0x0 +#define MX6SX_PAD_CSI_DATA06__ESAI_TX2_RX3 0x0064 0x03AC 0x0798 0x1 0x1 +#define MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x0064 0x03AC 0x07C0 0x2 0x2 +#define MX6SX_PAD_CSI_DATA06__KPP_COL_7 0x0064 0x03AC 0x07D0 0x3 0x0 +#define MX6SX_PAD_CSI_DATA06__UART6_RTS_B 0x0064 0x03AC 0x0854 0x4 0x0 +#define MX6SX_PAD_CSI_DATA06__GPIO1_IO_20 0x0064 0x03AC 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA06__WEIM_DATA_17 0x0064 0x03AC 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA06__DCIC2_OUT 0x0064 0x03AC 0x0000 0x7 0x0 +#define MX6SX_PAD_CSI_DATA06__VADC_DATA_10 0x0064 0x03AC 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA06__MMDC_DEBUG_43 0x0064 0x03AC 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_DATA07__CSI1_DATA_9 0x0068 0x03B0 0x06C4 0x0 0x0 +#define MX6SX_PAD_CSI_DATA07__ESAI_TX3_RX2 0x0068 0x03B0 0x079C 0x1 0x1 +#define MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x0068 0x03B0 0x07C4 0x2 0x2 +#define MX6SX_PAD_CSI_DATA07__KPP_ROW_7 0x0068 0x03B0 0x07DC 0x3 0x0 +#define MX6SX_PAD_CSI_DATA07__UART6_CTS_B 0x0068 0x03B0 0x0854 0x4 0x1 +#define MX6SX_PAD_CSI_DATA07__GPIO1_IO_21 0x0068 0x03B0 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_DATA07__WEIM_DATA_16 0x0068 0x03B0 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_DATA07__DCIC1_OUT 0x0068 0x03B0 0x0000 0x7 0x0 +#define MX6SX_PAD_CSI_DATA07__VADC_DATA_11 0x0068 0x03B0 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_DATA07__MMDC_DEBUG_44 0x0068 0x03B0 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_HSYNC__CSI1_HSYNC 0x006C 0x03B4 0x0700 0x0 0x0 +#define MX6SX_PAD_CSI_HSYNC__ESAI_TX0 0x006C 0x03B4 0x0790 0x1 0x1 +#define MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x006C 0x03B4 0x0678 0x2 0x1 +#define MX6SX_PAD_CSI_HSYNC__UART4_RTS_B 0x006C 0x03B4 0x0844 0x3 0x2 +#define MX6SX_PAD_CSI_HSYNC__MQS_LEFT 0x006C 0x03B4 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_HSYNC__GPIO1_IO_22 0x006C 0x03B4 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_HSYNC__WEIM_DATA_25 0x006C 0x03B4 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_HSYNC__SAI1_TX_DATA_0 0x006C 0x03B4 0x0000 0x7 0x0 +#define MX6SX_PAD_CSI_HSYNC__VADC_DATA_2 0x006C 0x03B4 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_HSYNC__MMDC_DEBUG_35 0x006C 0x03B4 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_MCLK__CSI1_MCLK 0x0070 0x03B8 0x0000 0x0 0x0 +#define MX6SX_PAD_CSI_MCLK__ESAI_TX_HF_CLK 0x0070 0x03B8 0x0784 0x1 0x1 +#define MX6SX_PAD_CSI_MCLK__OSC32K_32K_OUT 0x0070 0x03B8 0x0000 0x2 0x0 +#define MX6SX_PAD_CSI_MCLK__UART4_RX 0x0070 0x03B8 0x0848 0x3 0x2 +#define MX6SX_PAD_CSI_MCLK__UART4_TX 0x0070 0x03B8 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_MCLK__ANATOP_32K_OUT 0x0070 0x03B8 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_MCLK__GPIO1_IO_23 0x0070 0x03B8 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_MCLK__WEIM_DATA_26 0x0070 0x03B8 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_MCLK__CSI1_FIELD 0x0070 0x03B8 0x070C 0x7 0x0 +#define MX6SX_PAD_CSI_MCLK__VADC_DATA_1 0x0070 0x03B8 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_MCLK__MMDC_DEBUG_34 0x0070 0x03B8 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_PIXCLK__CSI1_PIXCLK 0x0074 0x03BC 0x0704 0x0 0x0 +#define MX6SX_PAD_CSI_PIXCLK__ESAI_RX_HF_CLK 0x0074 0x03BC 0x0780 0x1 0x1 +#define MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x0074 0x03BC 0x0000 0x2 0x0 +#define MX6SX_PAD_CSI_PIXCLK__UART4_RX 0x0074 0x03BC 0x0848 0x3 0x3 +#define MX6SX_PAD_CSI_PIXCLK__UART4_TX 0x0074 0x03BC 0x0000 0x3 0x0 +#define MX6SX_PAD_CSI_PIXCLK__ANATOP_24M_OUT 0x0074 0x03BC 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_PIXCLK__GPIO1_IO_24 0x0074 0x03BC 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_PIXCLK__WEIM_DATA_27 0x0074 0x03BC 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_PIXCLK__ESAI_TX_HF_CLK 0x0074 0x03BC 0x0784 0x7 0x2 +#define MX6SX_PAD_CSI_PIXCLK__VADC_CLK 0x0074 0x03BC 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_PIXCLK__MMDC_DEBUG_33 0x0074 0x03BC 0x0000 0x9 0x0 +#define MX6SX_PAD_CSI_VSYNC__CSI1_VSYNC 0x0078 0x03C0 0x0708 0x0 0x0 +#define MX6SX_PAD_CSI_VSYNC__ESAI_TX5_RX0 0x0078 0x03C0 0x07A4 0x1 0x1 +#define MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x0078 0x03C0 0x0674 0x2 0x1 +#define MX6SX_PAD_CSI_VSYNC__UART4_CTS_B 0x0078 0x03C0 0x0844 0x3 0x3 +#define MX6SX_PAD_CSI_VSYNC__MQS_RIGHT 0x0078 0x03C0 0x0000 0x4 0x0 +#define MX6SX_PAD_CSI_VSYNC__GPIO1_IO_25 0x0078 0x03C0 0x0000 0x5 0x0 +#define MX6SX_PAD_CSI_VSYNC__WEIM_DATA_24 0x0078 0x03C0 0x0000 0x6 0x0 +#define MX6SX_PAD_CSI_VSYNC__SAI1_RX_DATA_0 0x0078 0x03C0 0x07F8 0x7 0x0 +#define MX6SX_PAD_CSI_VSYNC__VADC_DATA_3 0x0078 0x03C0 0x0000 0x8 0x0 +#define MX6SX_PAD_CSI_VSYNC__MMDC_DEBUG_36 0x0078 0x03C0 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET1_COL__ENET1_COL 0x007C 0x03C4 0x0000 0x0 0x0 +#define MX6SX_PAD_ENET1_COL__ENET2_MDC 0x007C 0x03C4 0x0000 0x1 0x0 +#define MX6SX_PAD_ENET1_COL__AUDMUX_AUD4_TXC 0x007C 0x03C4 0x0654 0x2 0x1 +#define MX6SX_PAD_ENET1_COL__UART1_RI_B 0x007C 0x03C4 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET1_COL__SPDIF_EXT_CLK 0x007C 0x03C4 0x0828 0x4 0x1 +#define MX6SX_PAD_ENET1_COL__GPIO2_IO_0 0x007C 0x03C4 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET1_COL__CSI2_DATA_23 0x007C 0x03C4 0x0000 0x6 0x0 +#define MX6SX_PAD_ENET1_COL__LCDIF2_DATA_16 0x007C 0x03C4 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET1_COL__VDEC_DEBUG_37 0x007C 0x03C4 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET1_COL__PCIE_CTRL_DEBUG_31 0x007C 0x03C4 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET1_CRS__ENET1_CRS 0x0080 0x03C8 0x0000 0x0 0x0 +#define MX6SX_PAD_ENET1_CRS__ENET2_MDIO 0x0080 0x03C8 0x0770 0x1 0x1 +#define MX6SX_PAD_ENET1_CRS__AUDMUX_AUD4_TXD 0x0080 0x03C8 0x0648 0x2 0x1 +#define MX6SX_PAD_ENET1_CRS__UART1_DCD_B 0x0080 0x03C8 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET1_CRS__SPDIF_LOCK 0x0080 0x03C8 0x0000 0x4 0x0 +#define MX6SX_PAD_ENET1_CRS__GPIO2_IO_1 0x0080 0x03C8 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET1_CRS__CSI2_DATA_22 0x0080 0x03C8 0x0000 0x6 0x0 +#define MX6SX_PAD_ENET1_CRS__LCDIF2_DATA_17 0x0080 0x03C8 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET1_CRS__VDEC_DEBUG_36 0x0080 0x03C8 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET1_CRS__PCIE_CTRL_DEBUG_30 0x0080 0x03C8 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET1_MDC__ENET1_MDC 0x0084 0x03CC 0x0000 0x0 0x0 +#define MX6SX_PAD_ENET1_MDC__ENET2_MDC 0x0084 0x03CC 0x0000 0x1 0x0 +#define MX6SX_PAD_ENET1_MDC__AUDMUX_AUD3_RXFS 0x0084 0x03CC 0x0638 0x2 0x1 +#define MX6SX_PAD_ENET1_MDC__ANATOP_24M_OUT 0x0084 0x03CC 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET1_MDC__EPIT2_OUT 0x0084 0x03CC 0x0000 0x4 0x0 +#define MX6SX_PAD_ENET1_MDC__GPIO2_IO_2 0x0084 0x03CC 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET1_MDC__USB_OTG1_PWR 0x0084 0x03CC 0x0000 0x6 0x0 +#define MX6SX_PAD_ENET1_MDC__PWM7_OUT 0x0084 0x03CC 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0x0088 0x03D0 0x0764 0x0 0x1 +#define MX6SX_PAD_ENET1_MDIO__ENET2_MDIO 0x0088 0x03D0 0x0770 0x1 0x2 +#define MX6SX_PAD_ENET1_MDIO__AUDMUX_MCLK 0x0088 0x03D0 0x0000 0x2 0x0 +#define MX6SX_PAD_ENET1_MDIO__OSC32K_32K_OUT 0x0088 0x03D0 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET1_MDIO__EPIT1_OUT 0x0088 0x03D0 0x0000 0x4 0x0 +#define MX6SX_PAD_ENET1_MDIO__GPIO2_IO_3 0x0088 0x03D0 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET1_MDIO__USB_OTG1_OC 0x0088 0x03D0 0x0860 0x6 0x1 +#define MX6SX_PAD_ENET1_MDIO__PWM8_OUT 0x0088 0x03D0 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__ENET1_RX_CLK 0x008C 0x03D4 0x0768 0x0 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__ENET1_REF_CLK_25M 0x008C 0x03D4 0x0000 0x1 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__AUDMUX_AUD4_TXFS 0x008C 0x03D4 0x0658 0x2 0x1 +#define MX6SX_PAD_ENET1_RX_CLK__UART1_DSR_B 0x008C 0x03D4 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__SPDIF_OUT 0x008C 0x03D4 0x0000 0x4 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__GPIO2_IO_4 0x008C 0x03D4 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__CSI2_DATA_21 0x008C 0x03D4 0x0000 0x6 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__LCDIF2_DATA_18 0x008C 0x03D4 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__VDEC_DEBUG_35 0x008C 0x03D4 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET1_RX_CLK__PCIE_CTRL_DEBUG_29 0x008C 0x03D4 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__ENET1_TX_CLK 0x0090 0x03D8 0x0000 0x0 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x0090 0x03D8 0x0760 0x1 0x1 +#define MX6SX_PAD_ENET1_TX_CLK__AUDMUX_AUD4_RXD 0x0090 0x03D8 0x0644 0x2 0x1 +#define MX6SX_PAD_ENET1_TX_CLK__UART1_DTR_B 0x0090 0x03D8 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__SPDIF_SR_CLK 0x0090 0x03D8 0x0000 0x4 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__GPIO2_IO_5 0x0090 0x03D8 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__CSI2_DATA_20 0x0090 0x03D8 0x0000 0x6 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__LCDIF2_DATA_19 0x0090 0x03D8 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__VDEC_DEBUG_34 0x0090 0x03D8 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET1_TX_CLK__PCIE_CTRL_DEBUG_28 0x0090 0x03D8 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET2_COL__ENET2_COL 0x0094 0x03DC 0x0000 0x0 0x0 +#define MX6SX_PAD_ENET2_COL__ENET1_MDC 0x0094 0x03DC 0x0000 0x1 0x0 +#define MX6SX_PAD_ENET2_COL__AUDMUX_AUD4_RXC 0x0094 0x03DC 0x064C 0x2 0x1 +#define MX6SX_PAD_ENET2_COL__UART1_RX 0x0094 0x03DC 0x0830 0x3 0x2 +#define MX6SX_PAD_ENET2_COL__UART1_TX 0x0094 0x03DC 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_COL__SPDIF_IN 0x0094 0x03DC 0x0824 0x4 0x3 +#define MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x0094 0x03DC 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET2_COL__ANATOP_OTG1_ID 0x0094 0x03DC 0x0624 0x6 0x1 +#define MX6SX_PAD_ENET2_COL__LCDIF2_DATA_20 0x0094 0x03DC 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET2_COL__VDEC_DEBUG_33 0x0094 0x03DC 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET2_COL__PCIE_CTRL_DEBUG_27 0x0094 0x03DC 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET2_CRS__ENET2_CRS 0x0098 0x03E0 0x0000 0x0 0x0 +#define MX6SX_PAD_ENET2_CRS__ENET1_MDIO 0x0098 0x03E0 0x0764 0x1 0x2 +#define MX6SX_PAD_ENET2_CRS__AUDMUX_AUD4_RXFS 0x0098 0x03E0 0x0650 0x2 0x1 +#define MX6SX_PAD_ENET2_CRS__UART1_RX 0x0098 0x03E0 0x0830 0x3 0x3 +#define MX6SX_PAD_ENET2_CRS__UART1_TX 0x0098 0x03E0 0x0000 0x3 0x0 +#define MX6SX_PAD_ENET2_CRS__MLB_SIG 0x0098 0x03E0 0x07F0 0x4 0x1 +#define MX6SX_PAD_ENET2_CRS__GPIO2_IO_7 0x0098 0x03E0 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET2_CRS__ANATOP_OTG2_ID 0x0098 0x03E0 0x0628 0x6 0x1 +#define MX6SX_PAD_ENET2_CRS__LCDIF2_DATA_21 0x0098 0x03E0 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET2_CRS__VDEC_DEBUG_32 0x0098 0x03E0 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET2_CRS__PCIE_CTRL_DEBUG_26 0x0098 0x03E0 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET2_RX_CLK__ENET2_RX_CLK 0x009C 0x03E4 0x0774 0x0 0x0 +#define MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x009C 0x03E4 0x0000 0x1 0x0 +#define MX6SX_PAD_ENET2_RX_CLK__I2C3_SCL 0x009C 0x03E4 0x07B8 0x2 0x1 +#define MX6SX_PAD_ENET2_RX_CLK__UART1_RTS_B 0x009C 0x03E4 0x082C 0x3 0x2 +#define MX6SX_PAD_ENET2_RX_CLK__MLB_DATA 0x009C 0x03E4 0x07EC 0x4 0x1 +#define MX6SX_PAD_ENET2_RX_CLK__GPIO2_IO_8 0x009C 0x03E4 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET2_RX_CLK__USB_OTG2_OC 0x009C 0x03E4 0x085C 0x6 0x1 +#define MX6SX_PAD_ENET2_RX_CLK__LCDIF2_DATA_22 0x009C 0x03E4 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET2_RX_CLK__VDEC_DEBUG_31 0x009C 0x03E4 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET2_RX_CLK__PCIE_CTRL_DEBUG_25 0x009C 0x03E4 0x0000 0x9 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__ENET2_TX_CLK 0x00A0 0x03E8 0x0000 0x0 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__ENET2_REF_CLK2 0x00A0 0x03E8 0x076C 0x1 0x1 +#define MX6SX_PAD_ENET2_TX_CLK__I2C3_SDA 0x00A0 0x03E8 0x07BC 0x2 0x1 +#define MX6SX_PAD_ENET2_TX_CLK__UART1_CTS_B 0x00A0 0x03E8 0x082C 0x3 0x3 +#define MX6SX_PAD_ENET2_TX_CLK__MLB_CLK 0x00A0 0x03E8 0x07E8 0x4 0x1 +#define MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9 0x00A0 0x03E8 0x0000 0x5 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__USB_OTG2_PWR 0x00A0 0x03E8 0x0000 0x6 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__LCDIF2_DATA_23 0x00A0 0x03E8 0x0000 0x7 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__VDEC_DEBUG_30 0x00A0 0x03E8 0x0000 0x8 0x0 +#define MX6SX_PAD_ENET2_TX_CLK__PCIE_CTRL_DEBUG_24 0x00A0 0x03E8 0x0000 0x9 0x0 +#define MX6SX_PAD_KEY_COL0__KPP_COL_0 0x00A4 0x03EC 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_COL0__USDHC3_CD_B 0x00A4 0x03EC 0x0000 0x1 0x0 +#define MX6SX_PAD_KEY_COL0__UART6_RTS_B 0x00A4 0x03EC 0x0854 0x2 0x2 +#define MX6SX_PAD_KEY_COL0__ECSPI1_SCLK 0x00A4 0x03EC 0x0710 0x3 0x0 +#define MX6SX_PAD_KEY_COL0__AUDMUX_AUD5_TXC 0x00A4 0x03EC 0x066C 0x4 0x0 +#define MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x00A4 0x03EC 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_COL0__SDMA_EXT_EVENT_1 0x00A4 0x03EC 0x0820 0x6 0x1 +#define MX6SX_PAD_KEY_COL0__SAI2_TX_BCLK 0x00A4 0x03EC 0x0814 0x7 0x0 +#define MX6SX_PAD_KEY_COL0__VADC_DATA_0 0x00A4 0x03EC 0x0000 0x8 0x0 +#define MX6SX_PAD_KEY_COL1__KPP_COL_1 0x00A8 0x03F0 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_COL1__USDHC3_RESET_B 0x00A8 0x03F0 0x0000 0x1 0x0 +#define MX6SX_PAD_KEY_COL1__UART6_RX 0x00A8 0x03F0 0x0858 0x2 0x2 +#define MX6SX_PAD_KEY_COL1__UART6_TX 0x00A8 0x03F0 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL1__ECSPI1_MISO 0x00A8 0x03F0 0x0714 0x3 0x0 +#define MX6SX_PAD_KEY_COL1__AUDMUX_AUD5_TXFS 0x00A8 0x03F0 0x0670 0x4 0x0 +#define MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x00A8 0x03F0 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_COL1__USDHC3_RESET 0x00A8 0x03F0 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_COL1__SAI2_TX_SYNC 0x00A8 0x03F0 0x0818 0x7 0x0 +#define MX6SX_PAD_KEY_COL2__KPP_COL_2 0x00AC 0x03F4 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_COL2__USDHC4_CD_B 0x00AC 0x03F4 0x0874 0x1 0x1 +#define MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x00AC 0x03F4 0x084C 0x2 0x2 +#define MX6SX_PAD_KEY_COL2__CAN1_TX 0x00AC 0x03F4 0x0000 0x3 0x0 +#define MX6SX_PAD_KEY_COL2__CANFD_TX1 0x00AC 0x03F4 0x0000 0x4 0x0 +#define MX6SX_PAD_KEY_COL2__GPIO2_IO_12 0x00AC 0x03F4 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_COL2__WEIM_DATA_30 0x00AC 0x03F4 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_COL2__ECSPI1_RDY 0x00AC 0x03F4 0x0000 0x7 0x0 +#define MX6SX_PAD_KEY_COL3__KPP_COL_3 0x00B0 0x03F8 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_COL3__USDHC4_LCTL 0x00B0 0x03F8 0x0000 0x1 0x0 +#define MX6SX_PAD_KEY_COL3__UART5_RX 0x00B0 0x03F8 0x0850 0x2 0x2 +#define MX6SX_PAD_KEY_COL3__UART5_TX 0x00B0 0x03F8 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_COL3__CAN2_TX 0x00B0 0x03F8 0x0000 0x3 0x0 +#define MX6SX_PAD_KEY_COL3__CANFD_TX2 0x00B0 0x03F8 0x0000 0x4 0x0 +#define MX6SX_PAD_KEY_COL3__GPIO2_IO_13 0x00B0 0x03F8 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_COL3__WEIM_DATA_28 0x00B0 0x03F8 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_COL3__ECSPI1_SS2 0x00B0 0x03F8 0x0000 0x7 0x0 +#define MX6SX_PAD_KEY_COL4__KPP_COL_4 0x00B4 0x03FC 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_COL4__ENET2_MDC 0x00B4 0x03FC 0x0000 0x1 0x0 +#define MX6SX_PAD_KEY_COL4__I2C3_SCL 0x00B4 0x03FC 0x07B8 0x2 0x2 +#define MX6SX_PAD_KEY_COL4__USDHC2_LCTL 0x00B4 0x03FC 0x0000 0x3 0x0 +#define MX6SX_PAD_KEY_COL4__AUDMUX_AUD5_RXC 0x00B4 0x03FC 0x0664 0x4 0x0 +#define MX6SX_PAD_KEY_COL4__GPIO2_IO_14 0x00B4 0x03FC 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_COL4__WEIM_CRE 0x00B4 0x03FC 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_COL4__SAI2_RX_BCLK 0x00B4 0x03FC 0x0808 0x7 0x0 +#define MX6SX_PAD_KEY_ROW0__KPP_ROW_0 0x00B8 0x0400 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_ROW0__USDHC3_WP 0x00B8 0x0400 0x0000 0x1 0x0 +#define MX6SX_PAD_KEY_ROW0__UART6_CTS_B 0x00B8 0x0400 0x0854 0x2 0x3 +#define MX6SX_PAD_KEY_ROW0__ECSPI1_MOSI 0x00B8 0x0400 0x0718 0x3 0x0 +#define MX6SX_PAD_KEY_ROW0__AUDMUX_AUD5_TXD 0x00B8 0x0400 0x0660 0x4 0x0 +#define MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x00B8 0x0400 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_ROW0__SDMA_EXT_EVENT_0 0x00B8 0x0400 0x081C 0x6 0x1 +#define MX6SX_PAD_KEY_ROW0__SAI2_TX_DATA_0 0x00B8 0x0400 0x0000 0x7 0x0 +#define MX6SX_PAD_KEY_ROW0__GPU_IDLE 0x00B8 0x0400 0x0000 0x8 0x0 +#define MX6SX_PAD_KEY_ROW1__KPP_ROW_1 0x00BC 0x0404 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_ROW1__USDHC4_VSELECT 0x00BC 0x0404 0x0000 0x1 0x0 +#define MX6SX_PAD_KEY_ROW1__UART6_RX 0x00BC 0x0404 0x0858 0x2 0x3 +#define MX6SX_PAD_KEY_ROW1__UART6_TX 0x00BC 0x0404 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW1__ECSPI1_SS0 0x00BC 0x0404 0x071C 0x3 0x0 +#define MX6SX_PAD_KEY_ROW1__AUDMUX_AUD5_RXD 0x00BC 0x0404 0x065C 0x4 0x0 +#define MX6SX_PAD_KEY_ROW1__GPIO2_IO_16 0x00BC 0x0404 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_ROW1__WEIM_DATA_31 0x00BC 0x0404 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_ROW1__SAI2_RX_DATA_0 0x00BC 0x0404 0x080C 0x7 0x0 +#define MX6SX_PAD_KEY_ROW1__M4_NMI 0x00BC 0x0404 0x0000 0x8 0x0 +#define MX6SX_PAD_KEY_ROW2__KPP_ROW_2 0x00C0 0x0408 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_ROW2__USDHC4_WP 0x00C0 0x0408 0x0878 0x1 0x1 +#define MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x00C0 0x0408 0x084C 0x2 0x3 +#define MX6SX_PAD_KEY_ROW2__CAN1_RX 0x00C0 0x0408 0x068C 0x3 0x1 +#define MX6SX_PAD_KEY_ROW2__CANFD_RX1 0x00C0 0x0408 0x0694 0x4 0x1 +#define MX6SX_PAD_KEY_ROW2__GPIO2_IO_17 0x00C0 0x0408 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_ROW2__WEIM_DATA_29 0x00C0 0x0408 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_ROW2__ECSPI1_SS3 0x00C0 0x0408 0x0000 0x7 0x0 +#define MX6SX_PAD_KEY_ROW3__KPP_ROW_3 0x00C4 0x040C 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_ROW3__USDHC3_LCTL 0x00C4 0x040C 0x0000 0x1 0x0 +#define MX6SX_PAD_KEY_ROW3__UART5_RX 0x00C4 0x040C 0x0850 0x2 0x3 +#define MX6SX_PAD_KEY_ROW3__UART5_TX 0x00C4 0x040C 0x0000 0x2 0x0 +#define MX6SX_PAD_KEY_ROW3__CAN2_RX 0x00C4 0x040C 0x0690 0x3 0x1 +#define MX6SX_PAD_KEY_ROW3__CANFD_RX2 0x00C4 0x040C 0x0698 0x4 0x1 +#define MX6SX_PAD_KEY_ROW3__GPIO2_IO_18 0x00C4 0x040C 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_ROW3__WEIM_DTACK_B 0x00C4 0x040C 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_ROW3__ECSPI1_SS1 0x00C4 0x040C 0x0000 0x7 0x0 +#define MX6SX_PAD_KEY_ROW4__KPP_ROW_4 0x00C8 0x0410 0x0000 0x0 0x0 +#define MX6SX_PAD_KEY_ROW4__ENET2_MDIO 0x00C8 0x0410 0x0770 0x1 0x3 +#define MX6SX_PAD_KEY_ROW4__I2C3_SDA 0x00C8 0x0410 0x07BC 0x2 0x2 +#define MX6SX_PAD_KEY_ROW4__USDHC1_LCTL 0x00C8 0x0410 0x0000 0x3 0x0 +#define MX6SX_PAD_KEY_ROW4__AUDMUX_AUD5_RXFS 0x00C8 0x0410 0x0668 0x4 0x0 +#define MX6SX_PAD_KEY_ROW4__GPIO2_IO_19 0x00C8 0x0410 0x0000 0x5 0x0 +#define MX6SX_PAD_KEY_ROW4__WEIM_ACLK_FREERUN 0x00C8 0x0410 0x0000 0x6 0x0 +#define MX6SX_PAD_KEY_ROW4__SAI2_RX_SYNC 0x00C8 0x0410 0x0810 0x7 0x0 +#define MX6SX_PAD_LCD1_CLK__LCDIF1_CLK 0x00CC 0x0414 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_CLK__LCDIF1_WR_RWN 0x00CC 0x0414 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_CLK__AUDMUX_AUD3_RXC 0x00CC 0x0414 0x0634 0x2 0x1 +#define MX6SX_PAD_LCD1_CLK__ENET1_1588_EVENT2_IN 0x00CC 0x0414 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_CLK__CSI1_DATA_16 0x00CC 0x0414 0x06DC 0x4 0x0 +#define MX6SX_PAD_LCD1_CLK__GPIO3_IO_0 0x00CC 0x0414 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_CLK__USDHC1_WP 0x00CC 0x0414 0x0868 0x6 0x0 +#define MX6SX_PAD_LCD1_CLK__SIM_M_HADDR_16 0x00CC 0x0414 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_CLK__VADC_TEST_0 0x00CC 0x0414 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_CLK__MMDC_DEBUG_0 0x00CC 0x0414 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA00__LCDIF1_DATA_0 0x00D0 0x0418 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA00__WEIM_CS1_B 0x00D0 0x0418 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA00__M4_TRACE_0 0x00D0 0x0418 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA00__KITTEN_TRACE_0 0x00D0 0x0418 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA00__CSI1_DATA_20 0x00D0 0x0418 0x06EC 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA00__GPIO3_IO_1 0x00D0 0x0418 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA00__SRC_BT_CFG_0 0x00D0 0x0418 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA00__SIM_M_HADDR_21 0x00D0 0x0418 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA00__VADC_TEST_5 0x00D0 0x0418 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA00__MMDC_DEBUG_5 0x00D0 0x0418 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA01__LCDIF1_DATA_1 0x00D4 0x041C 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA01__WEIM_CS2_B 0x00D4 0x041C 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA01__M4_TRACE_1 0x00D4 0x041C 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA01__KITTEN_TRACE_1 0x00D4 0x041C 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA01__CSI1_DATA_21 0x00D4 0x041C 0x06F0 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA01__GPIO3_IO_2 0x00D4 0x041C 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA01__SRC_BT_CFG_1 0x00D4 0x041C 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA01__SIM_M_HADDR_22 0x00D4 0x041C 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA01__VADC_TEST_6 0x00D4 0x041C 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA01__MMDC_DEBUG_6 0x00D4 0x041C 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA02__LCDIF1_DATA_2 0x00D8 0x0420 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA02__WEIM_CS3_B 0x00D8 0x0420 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA02__M4_TRACE_2 0x00D8 0x0420 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA02__KITTEN_TRACE_2 0x00D8 0x0420 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA02__CSI1_DATA_22 0x00D8 0x0420 0x06F4 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA02__GPIO3_IO_3 0x00D8 0x0420 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA02__SRC_BT_CFG_2 0x00D8 0x0420 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA02__SIM_M_HADDR_23 0x00D8 0x0420 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA02__VADC_TEST_7 0x00D8 0x0420 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA02__MMDC_DEBUG_7 0x00D8 0x0420 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA03__LCDIF1_DATA_3 0x00DC 0x0424 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA03__WEIM_ADDR_24 0x00DC 0x0424 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA03__M4_TRACE_3 0x00DC 0x0424 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA03__KITTEN_TRACE_3 0x00DC 0x0424 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA03__CSI1_DATA_23 0x00DC 0x0424 0x06F8 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA03__GPIO3_IO_4 0x00DC 0x0424 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA03__SRC_BT_CFG_3 0x00DC 0x0424 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA03__SIM_M_HADDR_24 0x00DC 0x0424 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA03__VADC_TEST_8 0x00DC 0x0424 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA03__MMDC_DEBUG_8 0x00DC 0x0424 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA04__LCDIF1_DATA_4 0x00E0 0x0428 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA04__WEIM_ADDR_25 0x00E0 0x0428 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA04__KITTEN_TRACE_4 0x00E0 0x0428 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA04__CSI1_VSYNC 0x00E0 0x0428 0x0708 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA04__GPIO3_IO_5 0x00E0 0x0428 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA04__SRC_BT_CFG_4 0x00E0 0x0428 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA04__SIM_M_HADDR_25 0x00E0 0x0428 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA04__VADC_TEST_9 0x00E0 0x0428 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA04__MMDC_DEBUG_9 0x00E0 0x0428 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA05__LCDIF1_DATA_5 0x00E4 0x042C 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA05__WEIM_ADDR_26 0x00E4 0x042C 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA05__KITTEN_TRACE_5 0x00E4 0x042C 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA05__CSI1_HSYNC 0x00E4 0x042C 0x0700 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA05__GPIO3_IO_6 0x00E4 0x042C 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA05__SRC_BT_CFG_5 0x00E4 0x042C 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA05__SIM_M_HADDR_26 0x00E4 0x042C 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA05__VADC_TEST_10 0x00E4 0x042C 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA05__MMDC_DEBUG_10 0x00E4 0x042C 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA06__LCDIF1_DATA_6 0x00E8 0x0430 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA06__WEIM_EB_B_2 0x00E8 0x0430 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA06__KITTEN_TRACE_6 0x00E8 0x0430 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA06__CSI1_PIXCLK 0x00E8 0x0430 0x0704 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA06__GPIO3_IO_7 0x00E8 0x0430 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA06__SRC_BT_CFG_6 0x00E8 0x0430 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA06__SIM_M_HADDR_27 0x00E8 0x0430 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA06__VADC_TEST_11 0x00E8 0x0430 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA06__MMDC_DEBUG_11 0x00E8 0x0430 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA07__LCDIF1_DATA_7 0x00EC 0x0434 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA07__WEIM_EB_B_3 0x00EC 0x0434 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA07__KITTEN_TRACE_7 0x00EC 0x0434 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA07__CSI1_MCLK 0x00EC 0x0434 0x0000 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA07__GPIO3_IO_8 0x00EC 0x0434 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA07__SRC_BT_CFG_7 0x00EC 0x0434 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA07__SIM_M_HADDR_28 0x00EC 0x0434 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA07__VADC_TEST_12 0x00EC 0x0434 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA07__MMDC_DEBUG_12 0x00EC 0x0434 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA08__LCDIF1_DATA_8 0x00F0 0x0438 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA08__WEIM_AD_8 0x00F0 0x0438 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA08__KITTEN_TRACE_8 0x00F0 0x0438 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA08__CSI1_DATA_9 0x00F0 0x0438 0x06C4 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA08__GPIO3_IO_9 0x00F0 0x0438 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA08__SRC_BT_CFG_8 0x00F0 0x0438 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA08__SIM_M_HADDR_29 0x00F0 0x0438 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA08__VADC_TEST_13 0x00F0 0x0438 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA08__MMDC_DEBUG_13 0x00F0 0x0438 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA09__LCDIF1_DATA_9 0x00F4 0x043C 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA09__WEIM_AD_9 0x00F4 0x043C 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA09__KITTEN_TRACE_9 0x00F4 0x043C 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA09__CSI1_DATA_8 0x00F4 0x043C 0x06C0 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA09__GPIO3_IO_10 0x00F4 0x043C 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA09__SRC_BT_CFG_9 0x00F4 0x043C 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA09__SIM_M_HADDR_30 0x00F4 0x043C 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA09__VADC_TEST_14 0x00F4 0x043C 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA09__MMDC_DEBUG_14 0x00F4 0x043C 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA10__LCDIF1_DATA_10 0x00F8 0x0440 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA10__WEIM_AD_10 0x00F8 0x0440 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA10__KITTEN_TRACE_10 0x00F8 0x0440 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA10__CSI1_DATA_7 0x00F8 0x0440 0x06BC 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA10__GPIO3_IO_11 0x00F8 0x0440 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA10__SRC_BT_CFG_10 0x00F8 0x0440 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA10__SIM_M_HADDR_31 0x00F8 0x0440 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA10__VADC_TEST_15 0x00F8 0x0440 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA10__MMDC_DEBUG_15 0x00F8 0x0440 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA11__LCDIF1_DATA_11 0x00FC 0x0444 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA11__WEIM_AD_11 0x00FC 0x0444 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA11__KITTEN_TRACE_11 0x00FC 0x0444 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA11__CSI1_DATA_6 0x00FC 0x0444 0x06B8 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA11__GPIO3_IO_12 0x00FC 0x0444 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA11__SRC_BT_CFG_11 0x00FC 0x0444 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA11__SIM_M_HBURST_0 0x00FC 0x0444 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA11__VADC_TEST_16 0x00FC 0x0444 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA11__MMDC_DEBUG_16 0x00FC 0x0444 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA12__LCDIF1_DATA_12 0x0100 0x0448 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA12__WEIM_AD_12 0x0100 0x0448 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA12__KITTEN_TRACE_12 0x0100 0x0448 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA12__CSI1_DATA_5 0x0100 0x0448 0x06B4 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA12__GPIO3_IO_13 0x0100 0x0448 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA12__SRC_BT_CFG_12 0x0100 0x0448 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA12__SIM_M_HBURST_1 0x0100 0x0448 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA12__VADC_TEST_17 0x0100 0x0448 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA12__MMDC_DEBUG_17 0x0100 0x0448 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA13__LCDIF1_DATA_13 0x0104 0x044C 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA13__WEIM_AD_13 0x0104 0x044C 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA13__KITTEN_TRACE_13 0x0104 0x044C 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA13__CSI1_DATA_4 0x0104 0x044C 0x06B0 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA13__GPIO3_IO_14 0x0104 0x044C 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA13__SRC_BT_CFG_13 0x0104 0x044C 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA13__SIM_M_HBURST_2 0x0104 0x044C 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA13__VADC_TEST_18 0x0104 0x044C 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA13__MMDC_DEBUG_18 0x0104 0x044C 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA14__LCDIF1_DATA_14 0x0108 0x0450 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA14__WEIM_AD_14 0x0108 0x0450 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA14__KITTEN_TRACE_14 0x0108 0x0450 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA14__CSI1_DATA_3 0x0108 0x0450 0x06AC 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA14__GPIO3_IO_15 0x0108 0x0450 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA14__SRC_BT_CFG_14 0x0108 0x0450 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA14__SIM_M_HMASTLOCK 0x0108 0x0450 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA14__VADC_TEST_19 0x0108 0x0450 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA14__MMDC_DEBUG_19 0x0108 0x0450 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA15__LCDIF1_DATA_15 0x010C 0x0454 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA15__WEIM_AD_15 0x010C 0x0454 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA15__KITTEN_TRACE_15 0x010C 0x0454 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA15__CSI1_DATA_2 0x010C 0x0454 0x06A8 0x4 0x1 +#define MX6SX_PAD_LCD1_DATA15__GPIO3_IO_16 0x010C 0x0454 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA15__SRC_BT_CFG_15 0x010C 0x0454 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA15__SIM_M_HPROT_0 0x010C 0x0454 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA15__VDEC_DEBUG_0 0x010C 0x0454 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA15__MMDC_DEBUG_20 0x010C 0x0454 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA16__LCDIF1_DATA_16 0x0110 0x0458 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA16__WEIM_ADDR_16 0x0110 0x0458 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA16__M4_TRACE_CLK 0x0110 0x0458 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA16__KITTEN_TRACE_CLK 0x0110 0x0458 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA16__CSI1_DATA_1 0x0110 0x0458 0x06A4 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA16__GPIO3_IO_17 0x0110 0x0458 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA16__SRC_BT_CFG_24 0x0110 0x0458 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA16__SIM_M_HPROT_1 0x0110 0x0458 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA16__VDEC_DEBUG_1 0x0110 0x0458 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA16__MMDC_DEBUG_21 0x0110 0x0458 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA17__LCDIF1_DATA_17 0x0114 0x045C 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA17__WEIM_ADDR_17 0x0114 0x045C 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA17__KITTEN_TRACE_CTL 0x0114 0x045C 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA17__CSI1_DATA_0 0x0114 0x045C 0x06A0 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA17__GPIO3_IO_18 0x0114 0x045C 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA17__SRC_BT_CFG_25 0x0114 0x045C 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA17__SIM_M_HPROT_2 0x0114 0x045C 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA17__VDEC_DEBUG_2 0x0114 0x045C 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA17__MMDC_DEBUG_22 0x0114 0x045C 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA18__LCDIF1_DATA_18 0x0118 0x0460 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA18__WEIM_ADDR_18 0x0118 0x0460 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA18__M4_EVENTO 0x0118 0x0460 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA18__KITTEN_EVENTO 0x0118 0x0460 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA18__CSI1_DATA_15 0x0118 0x0460 0x06D8 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA18__GPIO3_IO_19 0x0118 0x0460 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA18__SRC_BT_CFG_26 0x0118 0x0460 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA18__SIM_M_HPROT_3 0x0118 0x0460 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA18__VDEC_DEBUG_3 0x0118 0x0460 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA18__MMDC_DEBUG_23 0x0118 0x0460 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA19__LCDIF1_DATA_19 0x011C 0x0464 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA19__WEIM_ADDR_19 0x011C 0x0464 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA19__M4_TRACE_SWO 0x011C 0x0464 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA19__CSI1_DATA_14 0x011C 0x0464 0x06D4 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA19__GPIO3_IO_20 0x011C 0x0464 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA19__SRC_BT_CFG_27 0x011C 0x0464 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA19__SIM_M_HREADYOUT 0x011C 0x0464 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA19__VDEC_DEBUG_4 0x011C 0x0464 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA19__MMDC_DEBUG_24 0x011C 0x0464 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA20__LCDIF1_DATA_20 0x0120 0x0468 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA20__WEIM_ADDR_20 0x0120 0x0468 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA20__PWM8_OUT 0x0120 0x0468 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA20__ENET1_1588_EVENT2_OUT 0x0120 0x0468 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA20__CSI1_DATA_13 0x0120 0x0468 0x06D0 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA20__GPIO3_IO_21 0x0120 0x0468 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA20__SRC_BT_CFG_28 0x0120 0x0468 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA20__SIM_M_HRESP 0x0120 0x0468 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA20__VDEC_DEBUG_5 0x0120 0x0468 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA20__MMDC_DEBUG_25 0x0120 0x0468 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA21__LCDIF1_DATA_21 0x0124 0x046C 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA21__WEIM_ADDR_21 0x0124 0x046C 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA21__PWM7_OUT 0x0124 0x046C 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA21__ENET1_1588_EVENT3_OUT 0x0124 0x046C 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA21__CSI1_DATA_12 0x0124 0x046C 0x06CC 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA21__GPIO3_IO_22 0x0124 0x046C 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA21__SRC_BT_CFG_29 0x0124 0x046C 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA21__SIM_M_HSIZE_0 0x0124 0x046C 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA21__VDEC_DEBUG_6 0x0124 0x046C 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA21__MMDC_DEBUG_26 0x0124 0x046C 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA22__LCDIF1_DATA_22 0x0128 0x0470 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA22__WEIM_ADDR_22 0x0128 0x0470 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA22__PWM6_OUT 0x0128 0x0470 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA22__ENET2_1588_EVENT2_OUT 0x0128 0x0470 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA22__CSI1_DATA_11 0x0128 0x0470 0x06C8 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA22__GPIO3_IO_23 0x0128 0x0470 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA22__SRC_BT_CFG_30 0x0128 0x0470 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA22__SIM_M_HSIZE_1 0x0128 0x0470 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA22__VDEC_DEBUG_7 0x0128 0x0470 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA22__MMDC_DEBUG_27 0x0128 0x0470 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_DATA23__LCDIF1_DATA_23 0x012C 0x0474 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_DATA23__WEIM_ADDR_23 0x012C 0x0474 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_DATA23__PWM5_OUT 0x012C 0x0474 0x0000 0x2 0x0 +#define MX6SX_PAD_LCD1_DATA23__ENET2_1588_EVENT3_OUT 0x012C 0x0474 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_DATA23__CSI1_DATA_10 0x012C 0x0474 0x06FC 0x4 0x0 +#define MX6SX_PAD_LCD1_DATA23__GPIO3_IO_24 0x012C 0x0474 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_DATA23__SRC_BT_CFG_31 0x012C 0x0474 0x0000 0x6 0x0 +#define MX6SX_PAD_LCD1_DATA23__SIM_M_HSIZE_2 0x012C 0x0474 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_DATA23__VDEC_DEBUG_8 0x012C 0x0474 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_DATA23__MMDC_DEBUG_28 0x012C 0x0474 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_ENABLE 0x0130 0x0478 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_ENABLE__LCDIF1_RD_E 0x0130 0x0478 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_ENABLE__AUDMUX_AUD3_TXC 0x0130 0x0478 0x063C 0x2 0x1 +#define MX6SX_PAD_LCD1_ENABLE__ENET1_1588_EVENT3_IN 0x0130 0x0478 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_ENABLE__CSI1_DATA_17 0x0130 0x0478 0x06E0 0x4 0x0 +#define MX6SX_PAD_LCD1_ENABLE__GPIO3_IO_25 0x0130 0x0478 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_ENABLE__USDHC1_CD_B 0x0130 0x0478 0x0864 0x6 0x0 +#define MX6SX_PAD_LCD1_ENABLE__SIM_M_HADDR_17 0x0130 0x0478 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_ENABLE__VADC_TEST_1 0x0130 0x0478 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_ENABLE__MMDC_DEBUG_1 0x0130 0x0478 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_HSYNC 0x0134 0x047C 0x07E0 0x0 0x0 +#define MX6SX_PAD_LCD1_HSYNC__LCDIF1_RS 0x0134 0x047C 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_HSYNC__AUDMUX_AUD3_TXD 0x0134 0x047C 0x0630 0x2 0x1 +#define MX6SX_PAD_LCD1_HSYNC__ENET2_1588_EVENT2_IN 0x0134 0x047C 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_HSYNC__CSI1_DATA_18 0x0134 0x047C 0x06E4 0x4 0x0 +#define MX6SX_PAD_LCD1_HSYNC__GPIO3_IO_26 0x0134 0x047C 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_HSYNC__USDHC2_WP 0x0134 0x047C 0x0870 0x6 0x0 +#define MX6SX_PAD_LCD1_HSYNC__SIM_M_HADDR_18 0x0134 0x047C 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_HSYNC__VADC_TEST_2 0x0134 0x047C 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_HSYNC__MMDC_DEBUG_2 0x0134 0x047C 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_RESET__LCDIF1_RESET 0x0138 0x0480 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_RESET__LCDIF1_CS 0x0138 0x0480 0x0000 0x1 0x0 +#define MX6SX_PAD_LCD1_RESET__AUDMUX_AUD3_RXD 0x0138 0x0480 0x062C 0x2 0x1 +#define MX6SX_PAD_LCD1_RESET__KITTEN_EVENTI 0x0138 0x0480 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_RESET__M4_EVENTI 0x0138 0x0480 0x0000 0x4 0x0 +#define MX6SX_PAD_LCD1_RESET__GPIO3_IO_27 0x0138 0x0480 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_RESET__CCM_PMIC_RDY 0x0138 0x0480 0x069C 0x6 0x0 +#define MX6SX_PAD_LCD1_RESET__SIM_M_HADDR_20 0x0138 0x0480 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_RESET__VADC_TEST_4 0x0138 0x0480 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_RESET__MMDC_DEBUG_4 0x0138 0x0480 0x0000 0x9 0x0 +#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_VSYNC 0x013C 0x0484 0x0000 0x0 0x0 +#define MX6SX_PAD_LCD1_VSYNC__LCDIF1_BUSY 0x013C 0x0484 0x07E0 0x1 0x1 +#define MX6SX_PAD_LCD1_VSYNC__AUDMUX_AUD3_TXFS 0x013C 0x0484 0x0640 0x2 0x1 +#define MX6SX_PAD_LCD1_VSYNC__ENET2_1588_EVENT3_IN 0x013C 0x0484 0x0000 0x3 0x0 +#define MX6SX_PAD_LCD1_VSYNC__CSI1_DATA_19 0x013C 0x0484 0x06E8 0x4 0x0 +#define MX6SX_PAD_LCD1_VSYNC__GPIO3_IO_28 0x013C 0x0484 0x0000 0x5 0x0 +#define MX6SX_PAD_LCD1_VSYNC__USDHC2_CD_B 0x013C 0x0484 0x086C 0x6 0x0 +#define MX6SX_PAD_LCD1_VSYNC__SIM_M_HADDR_19 0x013C 0x0484 0x0000 0x7 0x0 +#define MX6SX_PAD_LCD1_VSYNC__VADC_TEST_3 0x013C 0x0484 0x0000 0x8 0x0 +#define MX6SX_PAD_LCD1_VSYNC__MMDC_DEBUG_3 0x013C 0x0484 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_ALE__RAWNAND_ALE 0x0140 0x0488 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_ALE__I2C3_SDA 0x0140 0x0488 0x07BC 0x1 0x0 +#define MX6SX_PAD_NAND_ALE__QSPI2_A_SS0_B 0x0140 0x0488 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_ALE__ECSPI2_SS0 0x0140 0x0488 0x072C 0x3 0x0 +#define MX6SX_PAD_NAND_ALE__ESAI_TX3_RX2 0x0140 0x0488 0x079C 0x4 0x0 +#define MX6SX_PAD_NAND_ALE__GPIO4_IO_0 0x0140 0x0488 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_ALE__WEIM_CS0_B 0x0140 0x0488 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_ALE__TPSMP_HDATA_0 0x0140 0x0488 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_ALE__ANATOP_USBPHY1_TSTI_TX_EN 0x0140 0x0488 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_ALE__SDMA_DEBUG_PC_12 0x0140 0x0488 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_CE0_B__RAWNAND_CE0_B 0x0144 0x048C 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_CE0_B__USDHC2_VSELECT 0x0144 0x048C 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_CE0_B__QSPI2_A_DATA_2 0x0144 0x048C 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_CE0_B__AUDMUX_AUD4_TXC 0x0144 0x048C 0x0654 0x3 0x0 +#define MX6SX_PAD_NAND_CE0_B__ESAI_TX_CLK 0x0144 0x048C 0x078C 0x4 0x0 +#define MX6SX_PAD_NAND_CE0_B__GPIO4_IO_1 0x0144 0x048C 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_CE0_B__WEIM_LBA_B 0x0144 0x048C 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_CE0_B__TPSMP_HDATA_3 0x0144 0x048C 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_CE0_B__ANATOP_USBPHY1_TSTI_TX_HIZ 0x0144 0x048C 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_CE0_B__SDMA_DEBUG_PC_9 0x0144 0x048C 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_CE1_B__RAWNAND_CE1_B 0x0148 0x0490 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_CE1_B__USDHC3_RESET_B 0x0148 0x0490 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_CE1_B__QSPI2_A_DATA_3 0x0148 0x0490 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_CE1_B__AUDMUX_AUD4_TXD 0x0148 0x0490 0x0648 0x3 0x0 +#define MX6SX_PAD_NAND_CE1_B__ESAI_TX0 0x0148 0x0490 0x0790 0x4 0x0 +#define MX6SX_PAD_NAND_CE1_B__GPIO4_IO_2 0x0148 0x0490 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_CE1_B__WEIM_OE 0x0148 0x0490 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_CE1_B__TPSMP_HDATA_4 0x0148 0x0490 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_CE1_B__ANATOP_USBPHY1_TSTI_TX_LS_MODE 0x0148 0x0490 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_CE1_B__SDMA_DEBUG_PC_8 0x0148 0x0490 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_CLE__RAWNAND_CLE 0x014C 0x0494 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_CLE__I2C3_SCL 0x014C 0x0494 0x07B8 0x1 0x0 +#define MX6SX_PAD_NAND_CLE__QSPI2_A_SCLK 0x014C 0x0494 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_CLE__ECSPI2_SCLK 0x014C 0x0494 0x0720 0x3 0x0 +#define MX6SX_PAD_NAND_CLE__ESAI_TX2_RX3 0x014C 0x0494 0x0798 0x4 0x0 +#define MX6SX_PAD_NAND_CLE__GPIO4_IO_3 0x014C 0x0494 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_CLE__WEIM_BCLK 0x014C 0x0494 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_CLE__TPSMP_CLK 0x014C 0x0494 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_CLE__ANATOP_USBPHY1_TSTI_TX_DP 0x014C 0x0494 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_CLE__SDMA_DEBUG_PC_13 0x014C 0x0494 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA00__RAWNAND_DATA00 0x0150 0x0498 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA00__USDHC1_DATA4 0x0150 0x0498 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA00__QSPI2_B_DATA_1 0x0150 0x0498 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA00__ECSPI5_MISO 0x0150 0x0498 0x0754 0x3 0x0 +#define MX6SX_PAD_NAND_DATA00__ESAI_RX_CLK 0x0150 0x0498 0x0788 0x4 0x0 +#define MX6SX_PAD_NAND_DATA00__GPIO4_IO_4 0x0150 0x0498 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA00__WEIM_AD_0 0x0150 0x0498 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA00__TPSMP_HDATA_7 0x0150 0x0498 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA00__ANATOP_USBPHY1_TSTO_RX_DISCON_DET 0x0150 0x0498 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA00__SDMA_DEBUG_EVT_CHN_LINES_5 0x0150 0x0498 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA01__RAWNAND_DATA01 0x0154 0x049C 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA01__USDHC1_DATA5 0x0154 0x049C 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA01__QSPI2_B_DATA_0 0x0154 0x049C 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA01__ECSPI5_MOSI 0x0154 0x049C 0x0758 0x3 0x0 +#define MX6SX_PAD_NAND_DATA01__ESAI_RX_FS 0x0154 0x049C 0x0778 0x4 0x0 +#define MX6SX_PAD_NAND_DATA01__GPIO4_IO_5 0x0154 0x049C 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA01__WEIM_AD_1 0x0154 0x049C 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA01__TPSMP_HDATA_8 0x0154 0x049C 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA01__ANATOP_USBPHY1_TSTO_RX_HS_RXD 0x0154 0x049C 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA01__SDMA_DEBUG_EVT_CHN_LINES_4 0x0154 0x049C 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA02__RAWNAND_DATA02 0x0158 0x04A0 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA02__USDHC1_DATA6 0x0158 0x04A0 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA02__QSPI2_B_SCLK 0x0158 0x04A0 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA02__ECSPI5_SCLK 0x0158 0x04A0 0x0750 0x3 0x0 +#define MX6SX_PAD_NAND_DATA02__ESAI_TX_HF_CLK 0x0158 0x04A0 0x0784 0x4 0x0 +#define MX6SX_PAD_NAND_DATA02__GPIO4_IO_6 0x0158 0x04A0 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA02__WEIM_AD_2 0x0158 0x04A0 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA02__TPSMP_HDATA_9 0x0158 0x04A0 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA02__ANATOP_USBPHY2_TSTO_PLL_CLK20DIV 0x0158 0x04A0 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA02__SDMA_DEBUG_EVT_CHN_LINES_3 0x0158 0x04A0 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA03__RAWNAND_DATA03 0x015C 0x04A4 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA03__USDHC1_DATA7 0x015C 0x04A4 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA03__QSPI2_B_SS0_B 0x015C 0x04A4 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA03__ECSPI5_SS0 0x015C 0x04A4 0x075C 0x3 0x0 +#define MX6SX_PAD_NAND_DATA03__ESAI_RX_HF_CLK 0x015C 0x04A4 0x0780 0x4 0x0 +#define MX6SX_PAD_NAND_DATA03__GPIO4_IO_7 0x015C 0x04A4 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA03__WEIM_AD_3 0x015C 0x04A4 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA03__TPSMP_HDATA_10 0x015C 0x04A4 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA03__ANATOP_USBPHY1_TSTO_RX_SQUELCH 0x015C 0x04A4 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA03__SDMA_DEBUG_EVT_CHN_LINES_6 0x015C 0x04A4 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA04__RAWNAND_DATA04 0x0160 0x04A8 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA04__USDHC2_DATA4 0x0160 0x04A8 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA04__QSPI2_B_SS1_B 0x0160 0x04A8 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA04__UART3_RTS_B 0x0160 0x04A8 0x083C 0x3 0x0 +#define MX6SX_PAD_NAND_DATA04__AUDMUX_AUD4_RXFS 0x0160 0x04A8 0x0650 0x4 0x0 +#define MX6SX_PAD_NAND_DATA04__GPIO4_IO_8 0x0160 0x04A8 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA04__WEIM_AD_4 0x0160 0x04A8 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA04__TPSMP_HDATA_11 0x0160 0x04A8 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA04__ANATOP_USBPHY2_TSTO_RX_SQUELCH 0x0160 0x04A8 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA04__SDMA_DEBUG_CORE_STATE_0 0x0160 0x04A8 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA05__RAWNAND_DATA05 0x0164 0x04AC 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA05__USDHC2_DATA5 0x0164 0x04AC 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA05__QSPI2_B_DQS 0x0164 0x04AC 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA05__UART3_CTS_B 0x0164 0x04AC 0x083C 0x3 0x1 +#define MX6SX_PAD_NAND_DATA05__AUDMUX_AUD4_RXC 0x0164 0x04AC 0x064C 0x4 0x0 +#define MX6SX_PAD_NAND_DATA05__GPIO4_IO_9 0x0164 0x04AC 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA05__WEIM_AD_5 0x0164 0x04AC 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA05__TPSMP_HDATA_12 0x0164 0x04AC 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA05__ANATOP_USBPHY2_TSTO_RX_DISCON_DET 0x0164 0x04AC 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA05__SDMA_DEBUG_CORE_STATE_1 0x0164 0x04AC 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA06__RAWNAND_DATA06 0x0168 0x04B0 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA06__USDHC2_DATA6 0x0168 0x04B0 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA06__QSPI2_A_SS1_B 0x0168 0x04B0 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA06__UART3_RX 0x0168 0x04B0 0x0840 0x3 0x0 +#define MX6SX_PAD_NAND_DATA06__UART3_TX 0x0168 0x04B0 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA06__PWM3_OUT 0x0168 0x04B0 0x0000 0x4 0x0 +#define MX6SX_PAD_NAND_DATA06__GPIO4_IO_10 0x0168 0x04B0 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA06__WEIM_AD_6 0x0168 0x04B0 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA06__TPSMP_HDATA_13 0x0168 0x04B0 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA06__ANATOP_USBPHY2_TSTO_RX_FS_RXD 0x0168 0x04B0 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA06__SDMA_DEBUG_CORE_STATE_2 0x0168 0x04B0 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_DATA07__RAWNAND_DATA07 0x016C 0x04B4 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_DATA07__USDHC2_DATA7 0x016C 0x04B4 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_DATA07__QSPI2_A_DQS 0x016C 0x04B4 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_DATA07__UART3_RX 0x016C 0x04B4 0x0840 0x3 0x1 +#define MX6SX_PAD_NAND_DATA07__UART3_TX 0x016C 0x04B4 0x0000 0x3 0x0 +#define MX6SX_PAD_NAND_DATA07__PWM4_OUT 0x016C 0x04B4 0x0000 0x4 0x0 +#define MX6SX_PAD_NAND_DATA07__GPIO4_IO_11 0x016C 0x04B4 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_DATA07__WEIM_AD_7 0x016C 0x04B4 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_DATA07__TPSMP_HDATA_14 0x016C 0x04B4 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_DATA07__ANATOP_USBPHY1_TSTO_RX_FS_RXD 0x016C 0x04B4 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_DATA07__SDMA_DEBUG_CORE_STATE_3 0x016C 0x04B4 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_RE_B__RAWNAND_RE_B 0x0170 0x04B8 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_RE_B__USDHC2_RESET_B 0x0170 0x04B8 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_RE_B__QSPI2_B_DATA_3 0x0170 0x04B8 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_RE_B__AUDMUX_AUD4_TXFS 0x0170 0x04B8 0x0658 0x3 0x0 +#define MX6SX_PAD_NAND_RE_B__ESAI_TX_FS 0x0170 0x04B8 0x077C 0x4 0x0 +#define MX6SX_PAD_NAND_RE_B__GPIO4_IO_12 0x0170 0x04B8 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_RE_B__WEIM_RW 0x0170 0x04B8 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_RE_B__TPSMP_HDATA_5 0x0170 0x04B8 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_RE_B__ANATOP_USBPHY2_TSTO_RX_HS_RXD 0x0170 0x04B8 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_RE_B__SDMA_DEBUG_PC_7 0x0170 0x04B8 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_READY_B__RAWNAND_READY_B 0x0174 0x04BC 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_READY_B__USDHC1_VSELECT 0x0174 0x04BC 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_READY_B__QSPI2_A_DATA_1 0x0174 0x04BC 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_READY_B__ECSPI2_MISO 0x0174 0x04BC 0x0724 0x3 0x0 +#define MX6SX_PAD_NAND_READY_B__ESAI_TX1 0x0174 0x04BC 0x0794 0x4 0x0 +#define MX6SX_PAD_NAND_READY_B__GPIO4_IO_13 0x0174 0x04BC 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_READY_B__WEIM_EB_B_1 0x0174 0x04BC 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_READY_B__TPSMP_HDATA_2 0x0174 0x04BC 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_READY_B__ANATOP_USBPHY1_TSTI_TX_DN 0x0174 0x04BC 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_READY_B__SDMA_DEBUG_PC_10 0x0174 0x04BC 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_WE_B__RAWNAND_WE_B 0x0178 0x04C0 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_WE_B__USDHC4_VSELECT 0x0178 0x04C0 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_WE_B__QSPI2_B_DATA_2 0x0178 0x04C0 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_WE_B__AUDMUX_AUD4_RXD 0x0178 0x04C0 0x0644 0x3 0x0 +#define MX6SX_PAD_NAND_WE_B__ESAI_TX5_RX0 0x0178 0x04C0 0x07A4 0x4 0x0 +#define MX6SX_PAD_NAND_WE_B__GPIO4_IO_14 0x0178 0x04C0 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_WE_B__WEIM_WAIT 0x0178 0x04C0 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_WE_B__TPSMP_HDATA_6 0x0178 0x04C0 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_WE_B__ANATOP_USBPHY1_TSTO_PLL_CLK20DIV 0x0178 0x04C0 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_WE_B__SDMA_DEBUG_PC_6 0x0178 0x04C0 0x0000 0x9 0x0 +#define MX6SX_PAD_NAND_WP_B__RAWNAND_WP_B 0x017C 0x04C4 0x0000 0x0 0x0 +#define MX6SX_PAD_NAND_WP_B__USDHC1_RESET_B 0x017C 0x04C4 0x0000 0x1 0x0 +#define MX6SX_PAD_NAND_WP_B__QSPI2_A_DATA_0 0x017C 0x04C4 0x0000 0x2 0x0 +#define MX6SX_PAD_NAND_WP_B__ECSPI2_MOSI 0x017C 0x04C4 0x0728 0x3 0x0 +#define MX6SX_PAD_NAND_WP_B__ESAI_TX4_RX1 0x017C 0x04C4 0x07A0 0x4 0x0 +#define MX6SX_PAD_NAND_WP_B__GPIO4_IO_15 0x017C 0x04C4 0x0000 0x5 0x0 +#define MX6SX_PAD_NAND_WP_B__WEIM_EB_B_0 0x017C 0x04C4 0x0000 0x6 0x0 +#define MX6SX_PAD_NAND_WP_B__TPSMP_HDATA_1 0x017C 0x04C4 0x0000 0x7 0x0 +#define MX6SX_PAD_NAND_WP_B__ANATOP_USBPHY1_TSTI_TX_HS_MODE 0x017C 0x04C4 0x0000 0x8 0x0 +#define MX6SX_PAD_NAND_WP_B__SDMA_DEBUG_PC_11 0x017C 0x04C4 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_DATA0__QSPI1_A_DATA_0 0x0180 0x04C8 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_DATA0__USB_OTG2_OC 0x0180 0x04C8 0x085C 0x1 0x2 +#define MX6SX_PAD_QSPI1A_DATA0__ECSPI1_MOSI 0x0180 0x04C8 0x0718 0x2 0x1 +#define MX6SX_PAD_QSPI1A_DATA0__ESAI_TX4_RX1 0x0180 0x04C8 0x07A0 0x3 0x2 +#define MX6SX_PAD_QSPI1A_DATA0__CSI1_DATA_14 0x0180 0x04C8 0x06D4 0x4 0x1 +#define MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x0180 0x04C8 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_DATA0__WEIM_DATA_6 0x0180 0x04C8 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_DATA0__SIM_M_HADDR_3 0x0180 0x04C8 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_DATA0__SDMA_DEBUG_BUS_DEVICE_3 0x0180 0x04C8 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_DATA1__QSPI1_A_DATA_1 0x0184 0x04CC 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_DATA1__ANATOP_OTG1_ID 0x0184 0x04CC 0x0624 0x1 0x2 +#define MX6SX_PAD_QSPI1A_DATA1__ECSPI1_MISO 0x0184 0x04CC 0x0714 0x2 0x1 +#define MX6SX_PAD_QSPI1A_DATA1__ESAI_TX1 0x0184 0x04CC 0x0794 0x3 0x2 +#define MX6SX_PAD_QSPI1A_DATA1__CSI1_DATA_13 0x0184 0x04CC 0x06D0 0x4 0x1 +#define MX6SX_PAD_QSPI1A_DATA1__GPIO4_IO_17 0x0184 0x04CC 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_DATA1__WEIM_DATA_5 0x0184 0x04CC 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_DATA1__SIM_M_HADDR_4 0x0184 0x04CC 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_DATA1__SDMA_DEBUG_PC_0 0x0184 0x04CC 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_DATA2__QSPI1_A_DATA_2 0x0188 0x04D0 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_DATA2__USB_OTG1_PWR 0x0188 0x04D0 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1A_DATA2__ECSPI5_SS1 0x0188 0x04D0 0x0000 0x2 0x0 +#define MX6SX_PAD_QSPI1A_DATA2__ESAI_TX_CLK 0x0188 0x04D0 0x078C 0x3 0x2 +#define MX6SX_PAD_QSPI1A_DATA2__CSI1_DATA_12 0x0188 0x04D0 0x06CC 0x4 0x1 +#define MX6SX_PAD_QSPI1A_DATA2__GPIO4_IO_18 0x0188 0x04D0 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_DATA2__WEIM_DATA_4 0x0188 0x04D0 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_DATA2__SIM_M_HADDR_6 0x0188 0x04D0 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_DATA2__SDMA_DEBUG_PC_1 0x0188 0x04D0 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_DATA3__QSPI1_A_DATA_3 0x018C 0x04D4 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_DATA3__USB_OTG1_OC 0x018C 0x04D4 0x0860 0x1 0x2 +#define MX6SX_PAD_QSPI1A_DATA3__ECSPI5_SS2 0x018C 0x04D4 0x0000 0x2 0x0 +#define MX6SX_PAD_QSPI1A_DATA3__ESAI_TX0 0x018C 0x04D4 0x0790 0x3 0x2 +#define MX6SX_PAD_QSPI1A_DATA3__CSI1_DATA_11 0x018C 0x04D4 0x06C8 0x4 0x1 +#define MX6SX_PAD_QSPI1A_DATA3__GPIO4_IO_19 0x018C 0x04D4 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_DATA3__WEIM_DATA_3 0x018C 0x04D4 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_DATA3__SIM_M_HADDR_7 0x018C 0x04D4 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_DATA3__SDMA_DEBUG_PC_2 0x018C 0x04D4 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_DQS__QSPI1_A_DQS 0x0190 0x04D8 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_DQS__CAN2_TX 0x0190 0x04D8 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1A_DQS__CANFD_TX2 0x0190 0x04D8 0x0000 0x2 0x0 +#define MX6SX_PAD_QSPI1A_DQS__ECSPI5_MOSI 0x0190 0x04D8 0x0758 0x3 0x1 +#define MX6SX_PAD_QSPI1A_DQS__CSI1_DATA_15 0x0190 0x04D8 0x06D8 0x4 0x1 +#define MX6SX_PAD_QSPI1A_DQS__GPIO4_IO_20 0x0190 0x04D8 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_DQS__WEIM_DATA_7 0x0190 0x04D8 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_DQS__SIM_M_HADDR_13 0x0190 0x04D8 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_DQS__SDMA_DEBUG_BUS_DEVICE_4 0x0190 0x04D8 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_SCLK__QSPI1_A_SCLK 0x0194 0x04DC 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_SCLK__ANATOP_OTG2_ID 0x0194 0x04DC 0x0628 0x1 0x2 +#define MX6SX_PAD_QSPI1A_SCLK__ECSPI1_SCLK 0x0194 0x04DC 0x0710 0x2 0x1 +#define MX6SX_PAD_QSPI1A_SCLK__ESAI_TX2_RX3 0x0194 0x04DC 0x0798 0x3 0x2 +#define MX6SX_PAD_QSPI1A_SCLK__CSI1_DATA_1 0x0194 0x04DC 0x06A4 0x4 0x1 +#define MX6SX_PAD_QSPI1A_SCLK__GPIO4_IO_21 0x0194 0x04DC 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_SCLK__WEIM_DATA_0 0x0194 0x04DC 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_SCLK__SIM_M_HADDR_0 0x0194 0x04DC 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_SCLK__SDMA_DEBUG_PC_5 0x0194 0x04DC 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_SS0_B__QSPI1_A_SS0_B 0x0198 0x04E0 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_SS0_B__USB_OTG2_PWR 0x0198 0x04E0 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1A_SS0_B__ECSPI1_SS0 0x0198 0x04E0 0x071C 0x2 0x1 +#define MX6SX_PAD_QSPI1A_SS0_B__ESAI_TX3_RX2 0x0198 0x04E0 0x079C 0x3 0x2 +#define MX6SX_PAD_QSPI1A_SS0_B__CSI1_DATA_0 0x0198 0x04E0 0x06A0 0x4 0x1 +#define MX6SX_PAD_QSPI1A_SS0_B__GPIO4_IO_22 0x0198 0x04E0 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_SS0_B__WEIM_DATA_1 0x0198 0x04E0 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_SS0_B__SIM_M_HADDR_1 0x0198 0x04E0 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_SS0_B__SDMA_DEBUG_PC_4 0x0198 0x04E0 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1A_SS1_B__QSPI1_A_SS1_B 0x019C 0x04E4 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1A_SS1_B__CAN1_RX 0x019C 0x04E4 0x068C 0x1 0x2 +#define MX6SX_PAD_QSPI1A_SS1_B__CANFD_RX1 0x019C 0x04E4 0x0694 0x2 0x2 +#define MX6SX_PAD_QSPI1A_SS1_B__ECSPI5_MISO 0x019C 0x04E4 0x0754 0x3 0x1 +#define MX6SX_PAD_QSPI1A_SS1_B__CSI1_DATA_10 0x019C 0x04E4 0x06FC 0x4 0x1 +#define MX6SX_PAD_QSPI1A_SS1_B__GPIO4_IO_23 0x019C 0x04E4 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1A_SS1_B__WEIM_DATA_2 0x019C 0x04E4 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1A_SS1_B__SIM_M_HADDR_12 0x019C 0x04E4 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1A_SS1_B__SDMA_DEBUG_PC_3 0x019C 0x04E4 0x0000 0x9 0x0 +#define MX6SX_PAD_QSPI1B_DATA0__QSPI1_B_DATA_0 0x01A0 0x04E8 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_DATA0__UART3_CTS_B 0x01A0 0x04E8 0x083C 0x1 0x4 +#define MX6SX_PAD_QSPI1B_DATA0__ECSPI3_MOSI 0x01A0 0x04E8 0x0738 0x2 0x1 +#define MX6SX_PAD_QSPI1B_DATA0__ESAI_RX_FS 0x01A0 0x04E8 0x0778 0x3 0x2 +#define MX6SX_PAD_QSPI1B_DATA0__CSI1_DATA_22 0x01A0 0x04E8 0x06F4 0x4 0x1 +#define MX6SX_PAD_QSPI1B_DATA0__GPIO4_IO_24 0x01A0 0x04E8 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_DATA0__WEIM_DATA_14 0x01A0 0x04E8 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_DATA0__SIM_M_HADDR_9 0x01A0 0x04E8 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1B_DATA1__QSPI1_B_DATA_1 0x01A4 0x04EC 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_DATA1__UART3_RTS_B 0x01A4 0x04EC 0x083C 0x1 0x5 +#define MX6SX_PAD_QSPI1B_DATA1__ECSPI3_MISO 0x01A4 0x04EC 0x0734 0x2 0x1 +#define MX6SX_PAD_QSPI1B_DATA1__ESAI_RX_CLK 0x01A4 0x04EC 0x0788 0x3 0x2 +#define MX6SX_PAD_QSPI1B_DATA1__CSI1_DATA_21 0x01A4 0x04EC 0x06F0 0x4 0x1 +#define MX6SX_PAD_QSPI1B_DATA1__GPIO4_IO_25 0x01A4 0x04EC 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_DATA1__WEIM_DATA_13 0x01A4 0x04EC 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_DATA1__SIM_M_HADDR_8 0x01A4 0x04EC 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1B_DATA2__QSPI1_B_DATA_2 0x01A8 0x04F0 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_DATA2__I2C2_SDA 0x01A8 0x04F0 0x07B4 0x1 0x2 +#define MX6SX_PAD_QSPI1B_DATA2__ECSPI5_RDY 0x01A8 0x04F0 0x0000 0x2 0x0 +#define MX6SX_PAD_QSPI1B_DATA2__ESAI_TX5_RX0 0x01A8 0x04F0 0x07A4 0x3 0x2 +#define MX6SX_PAD_QSPI1B_DATA2__CSI1_DATA_20 0x01A8 0x04F0 0x06EC 0x4 0x1 +#define MX6SX_PAD_QSPI1B_DATA2__GPIO4_IO_26 0x01A8 0x04F0 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_DATA2__WEIM_DATA_12 0x01A8 0x04F0 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_DATA2__SIM_M_HADDR_5 0x01A8 0x04F0 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1B_DATA3__QSPI1_B_DATA_3 0x01AC 0x04F4 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_DATA3__I2C2_SCL 0x01AC 0x04F4 0x07B0 0x1 0x2 +#define MX6SX_PAD_QSPI1B_DATA3__ECSPI5_SS3 0x01AC 0x04F4 0x0000 0x2 0x0 +#define MX6SX_PAD_QSPI1B_DATA3__ESAI_TX_FS 0x01AC 0x04F4 0x077C 0x3 0x2 +#define MX6SX_PAD_QSPI1B_DATA3__CSI1_DATA_19 0x01AC 0x04F4 0x06E8 0x4 0x1 +#define MX6SX_PAD_QSPI1B_DATA3__GPIO4_IO_27 0x01AC 0x04F4 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_DATA3__WEIM_DATA_11 0x01AC 0x04F4 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_DATA3__SIM_M_HADDR_2 0x01AC 0x04F4 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1B_DQS__QSPI1_B_DQS 0x01B0 0x04F8 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_DQS__CAN1_TX 0x01B0 0x04F8 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_DQS__CANFD_TX1 0x01B0 0x04F8 0x0000 0x2 0x0 +#define MX6SX_PAD_QSPI1B_DQS__ECSPI5_SS0 0x01B0 0x04F8 0x075C 0x3 0x1 +#define MX6SX_PAD_QSPI1B_DQS__CSI1_DATA_23 0x01B0 0x04F8 0x06F8 0x4 0x1 +#define MX6SX_PAD_QSPI1B_DQS__GPIO4_IO_28 0x01B0 0x04F8 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_DQS__WEIM_DATA_15 0x01B0 0x04F8 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_DQS__SIM_M_HADDR_15 0x01B0 0x04F8 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1B_SCLK__QSPI1_B_SCLK 0x01B4 0x04FC 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_SCLK__UART3_RX 0x01B4 0x04FC 0x0840 0x1 0x4 +#define MX6SX_PAD_QSPI1B_SCLK__UART3_TX 0x01B4 0x04FC 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_SCLK__ECSPI3_SCLK 0x01B4 0x04FC 0x0730 0x2 0x1 +#define MX6SX_PAD_QSPI1B_SCLK__ESAI_RX_HF_CLK 0x01B4 0x04FC 0x0780 0x3 0x2 +#define MX6SX_PAD_QSPI1B_SCLK__CSI1_DATA_16 0x01B4 0x04FC 0x06DC 0x4 0x1 +#define MX6SX_PAD_QSPI1B_SCLK__GPIO4_IO_29 0x01B4 0x04FC 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_SCLK__WEIM_DATA_8 0x01B4 0x04FC 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_SCLK__SIM_M_HADDR_11 0x01B4 0x04FC 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__QSPI1_B_SS0_B 0x01B8 0x0500 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_RX 0x01B8 0x0500 0x0840 0x1 0x5 +#define MX6SX_PAD_QSPI1B_SS0_B__UART3_TX 0x01B8 0x0500 0x0000 0x1 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__ECSPI3_SS0 0x01B8 0x0500 0x073C 0x2 0x1 +#define MX6SX_PAD_QSPI1B_SS0_B__ESAI_TX_HF_CLK 0x01B8 0x0500 0x0784 0x3 0x3 +#define MX6SX_PAD_QSPI1B_SS0_B__CSI1_DATA_17 0x01B8 0x0500 0x06E0 0x4 0x1 +#define MX6SX_PAD_QSPI1B_SS0_B__GPIO4_IO_30 0x01B8 0x0500 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__WEIM_DATA_9 0x01B8 0x0500 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_SS0_B__SIM_M_HADDR_10 0x01B8 0x0500 0x0000 0x7 0x0 +#define MX6SX_PAD_QSPI1B_SS1_B__QSPI1_B_SS1_B 0x01BC 0x0504 0x0000 0x0 0x0 +#define MX6SX_PAD_QSPI1B_SS1_B__CAN2_RX 0x01BC 0x0504 0x0690 0x1 0x2 +#define MX6SX_PAD_QSPI1B_SS1_B__CANFD_RX2 0x01BC 0x0504 0x0698 0x2 0x2 +#define MX6SX_PAD_QSPI1B_SS1_B__ECSPI5_SCLK 0x01BC 0x0504 0x0750 0x3 0x1 +#define MX6SX_PAD_QSPI1B_SS1_B__CSI1_DATA_18 0x01BC 0x0504 0x06E4 0x4 0x1 +#define MX6SX_PAD_QSPI1B_SS1_B__GPIO4_IO_31 0x01BC 0x0504 0x0000 0x5 0x0 +#define MX6SX_PAD_QSPI1B_SS1_B__WEIM_DATA_10 0x01BC 0x0504 0x0000 0x6 0x0 +#define MX6SX_PAD_QSPI1B_SS1_B__SIM_M_HADDR_14 0x01BC 0x0504 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x01C0 0x0508 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_RD0__GPIO5_IO_0 0x01C0 0x0508 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_RD0__CSI2_DATA_10 0x01C0 0x0508 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_RD0__ANATOP_TESTI_0 0x01C0 0x0508 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_RD0__RAWNAND_TESTER_TRIGGER 0x01C0 0x0508 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_RD0__PCIE_CTRL_DEBUG_0 0x01C0 0x0508 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x01C4 0x050C 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_RD1__GPIO5_IO_1 0x01C4 0x050C 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_RD1__CSI2_DATA_11 0x01C4 0x050C 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_RD1__ANATOP_TESTI_1 0x01C4 0x050C 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_RD1__USDHC1_TESTER_TRIGGER 0x01C4 0x050C 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_RD1__PCIE_CTRL_DEBUG_1 0x01C4 0x050C 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x01C8 0x0510 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_RD2__GPIO5_IO_2 0x01C8 0x0510 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_RD2__CSI2_DATA_12 0x01C8 0x0510 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_RD2__ANATOP_TESTI_2 0x01C8 0x0510 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_RD2__USDHC2_TESTER_TRIGGER 0x01C8 0x0510 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_RD2__PCIE_CTRL_DEBUG_2 0x01C8 0x0510 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x01CC 0x0514 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_RD3__GPIO5_IO_3 0x01CC 0x0514 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_RD3__CSI2_DATA_13 0x01CC 0x0514 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_RD3__ANATOP_TESTI_3 0x01CC 0x0514 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_RD3__USDHC3_TESTER_TRIGGER 0x01CC 0x0514 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_RD3__PCIE_CTRL_DEBUG_3 0x01CC 0x0514 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x01D0 0x0518 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_RX_CTL__GPIO5_IO_4 0x01D0 0x0518 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_RX_CTL__CSI2_DATA_14 0x01D0 0x0518 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_RX_CTL__ANATOP_TESTO_0 0x01D0 0x0518 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_RX_CTL__USDHC4_TESTER_TRIGGER 0x01D0 0x0518 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_RX_CTL__PCIE_CTRL_DEBUG_4 0x01D0 0x0518 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x01D4 0x051C 0x0768 0x0 0x1 +#define MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER 0x01D4 0x051C 0x0000 0x1 0x0 +#define MX6SX_PAD_RGMII1_RXC__GPIO5_IO_5 0x01D4 0x051C 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_RXC__CSI2_DATA_15 0x01D4 0x051C 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_RXC__ANATOP_TESTO_1 0x01D4 0x051C 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_RXC__ECSPI1_TESTER_TRIGGER 0x01D4 0x051C 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_RXC__PCIE_CTRL_DEBUG_5 0x01D4 0x051C 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0x01D8 0x0520 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_TD0__SAI2_RX_SYNC 0x01D8 0x0520 0x0810 0x2 0x1 +#define MX6SX_PAD_RGMII1_TD0__GPIO5_IO_6 0x01D8 0x0520 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_TD0__CSI2_DATA_16 0x01D8 0x0520 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_TD0__ANATOP_TESTO_2 0x01D8 0x0520 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_TD0__ECSPI2_TESTER_TRIGGER 0x01D8 0x0520 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_TD0__PCIE_CTRL_DEBUG_6 0x01D8 0x0520 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0x01DC 0x0524 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_TD1__SAI2_RX_BCLK 0x01DC 0x0524 0x0808 0x2 0x1 +#define MX6SX_PAD_RGMII1_TD1__GPIO5_IO_7 0x01DC 0x0524 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_TD1__CSI2_DATA_17 0x01DC 0x0524 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_TD1__ANATOP_TESTO_3 0x01DC 0x0524 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_TD1__ECSPI3_TESTER_TRIGGER 0x01DC 0x0524 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_TD1__PCIE_CTRL_DEBUG_7 0x01DC 0x0524 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0x01E0 0x0528 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_TD2__SAI2_TX_SYNC 0x01E0 0x0528 0x0818 0x2 0x1 +#define MX6SX_PAD_RGMII1_TD2__GPIO5_IO_8 0x01E0 0x0528 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_TD2__CSI2_DATA_18 0x01E0 0x0528 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_TD2__ANATOP_TESTO_4 0x01E0 0x0528 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_TD2__ECSPI4_TESTER_TRIGGER 0x01E0 0x0528 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_TD2__PCIE_CTRL_DEBUG_8 0x01E0 0x0528 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0x01E4 0x052C 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_TD3__SAI2_TX_BCLK 0x01E4 0x052C 0x0814 0x2 0x1 +#define MX6SX_PAD_RGMII1_TD3__GPIO5_IO_9 0x01E4 0x052C 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_TD3__CSI2_DATA_19 0x01E4 0x052C 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_TD3__ANATOP_TESTO_5 0x01E4 0x052C 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_TD3__ECSPI5_TESTER_TRIGGER 0x01E4 0x052C 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_TD3__PCIE_CTRL_DEBUG_9 0x01E4 0x052C 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0x01E8 0x0530 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_TX_CTL__SAI2_RX_DATA_0 0x01E8 0x0530 0x080C 0x2 0x1 +#define MX6SX_PAD_RGMII1_TX_CTL__GPIO5_IO_10 0x01E8 0x0530 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_TX_CTL__CSI2_DATA_0 0x01E8 0x0530 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_TX_CTL__ANATOP_TESTO_6 0x01E8 0x0530 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_TX_CTL__QSPI1_TESTER_TRIGGER 0x01E8 0x0530 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_TX_CTL__PCIE_CTRL_DEBUG_10 0x01E8 0x0530 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0x01EC 0x0534 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII1_TXC__ENET1_TX_ER 0x01EC 0x0534 0x0000 0x1 0x0 +#define MX6SX_PAD_RGMII1_TXC__SAI2_TX_DATA_0 0x01EC 0x0534 0x0000 0x2 0x0 +#define MX6SX_PAD_RGMII1_TXC__GPIO5_IO_11 0x01EC 0x0534 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII1_TXC__CSI2_DATA_1 0x01EC 0x0534 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII1_TXC__ANATOP_TESTO_7 0x01EC 0x0534 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII1_TXC__QSPI2_TESTER_TRIGGER 0x01EC 0x0534 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII1_TXC__PCIE_CTRL_DEBUG_11 0x01EC 0x0534 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x01F0 0x0538 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_RD0__PWM4_OUT 0x01F0 0x0538 0x0000 0x2 0x0 +#define MX6SX_PAD_RGMII2_RD0__GPIO5_IO_12 0x01F0 0x0538 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_RD0__CSI2_DATA_2 0x01F0 0x0538 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_RD0__ANATOP_TESTO_8 0x01F0 0x0538 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_RD0__VDEC_DEBUG_18 0x01F0 0x0538 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_RD0__PCIE_CTRL_DEBUG_12 0x01F0 0x0538 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x01F4 0x053C 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_RD1__PWM3_OUT 0x01F4 0x053C 0x0000 0x2 0x0 +#define MX6SX_PAD_RGMII2_RD1__GPIO5_IO_13 0x01F4 0x053C 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_RD1__CSI2_DATA_3 0x01F4 0x053C 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_RD1__ANATOP_TESTO_9 0x01F4 0x053C 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_RD1__VDEC_DEBUG_19 0x01F4 0x053C 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_RD1__PCIE_CTRL_DEBUG_13 0x01F4 0x053C 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x01F8 0x0540 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_RD2__PWM2_OUT 0x01F8 0x0540 0x0000 0x2 0x0 +#define MX6SX_PAD_RGMII2_RD2__GPIO5_IO_14 0x01F8 0x0540 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_RD2__CSI2_DATA_4 0x01F8 0x0540 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_RD2__ANATOP_TESTO_10 0x01F8 0x0540 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_RD2__VDEC_DEBUG_20 0x01F8 0x0540 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_RD2__PCIE_CTRL_DEBUG_14 0x01F8 0x0540 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x01FC 0x0544 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_RD3__PWM1_OUT 0x01FC 0x0544 0x0000 0x2 0x0 +#define MX6SX_PAD_RGMII2_RD3__GPIO5_IO_15 0x01FC 0x0544 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_RD3__CSI2_DATA_5 0x01FC 0x0544 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_RD3__ANATOP_TESTO_11 0x01FC 0x0544 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_RD3__VDEC_DEBUG_21 0x01FC 0x0544 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_RD3__PCIE_CTRL_DEBUG_15 0x01FC 0x0544 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x0200 0x0548 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_RX_CTL__GPIO5_IO_16 0x0200 0x0548 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_RX_CTL__CSI2_DATA_6 0x0200 0x0548 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_RX_CTL__ANATOP_TESTO_12 0x0200 0x0548 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_RX_CTL__VDEC_DEBUG_22 0x0200 0x0548 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_RX_CTL__PCIE_CTRL_DEBUG_16 0x0200 0x0548 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x0204 0x054C 0x0774 0x0 0x1 +#define MX6SX_PAD_RGMII2_RXC__ENET2_RX_ER 0x0204 0x054C 0x0000 0x1 0x0 +#define MX6SX_PAD_RGMII2_RXC__GPIO5_IO_17 0x0204 0x054C 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_RXC__CSI2_DATA_7 0x0204 0x054C 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_RXC__ANATOP_TESTO_13 0x0204 0x054C 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_RXC__VDEC_DEBUG_23 0x0204 0x054C 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_RXC__PCIE_CTRL_DEBUG_17 0x0204 0x054C 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0x0208 0x0550 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_TD0__SAI1_RX_SYNC 0x0208 0x0550 0x07FC 0x2 0x1 +#define MX6SX_PAD_RGMII2_TD0__PWM8_OUT 0x0208 0x0550 0x0000 0x3 0x0 +#define MX6SX_PAD_RGMII2_TD0__GPIO5_IO_18 0x0208 0x0550 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_TD0__CSI2_DATA_8 0x0208 0x0550 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_TD0__ANATOP_TESTO_14 0x0208 0x0550 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_TD0__VDEC_DEBUG_24 0x0208 0x0550 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_TD0__PCIE_CTRL_DEBUG_18 0x0208 0x0550 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0x020C 0x0554 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_TD1__SAI1_RX_BCLK 0x020C 0x0554 0x07F4 0x2 0x1 +#define MX6SX_PAD_RGMII2_TD1__PWM7_OUT 0x020C 0x0554 0x0000 0x3 0x0 +#define MX6SX_PAD_RGMII2_TD1__GPIO5_IO_19 0x020C 0x0554 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_TD1__CSI2_DATA_9 0x020C 0x0554 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_TD1__ANATOP_TESTO_15 0x020C 0x0554 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_TD1__VDEC_DEBUG_25 0x020C 0x0554 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_TD1__PCIE_CTRL_DEBUG_19 0x020C 0x0554 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0x0210 0x0558 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_TD2__SAI1_TX_SYNC 0x0210 0x0558 0x0804 0x2 0x1 +#define MX6SX_PAD_RGMII2_TD2__PWM6_OUT 0x0210 0x0558 0x0000 0x3 0x0 +#define MX6SX_PAD_RGMII2_TD2__GPIO5_IO_20 0x0210 0x0558 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_TD2__CSI2_VSYNC 0x0210 0x0558 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_TD2__SJC_FAIL 0x0210 0x0558 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_TD2__VDEC_DEBUG_26 0x0210 0x0558 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_TD2__PCIE_CTRL_DEBUG_20 0x0210 0x0558 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0x0214 0x055C 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_TD3__SAI1_TX_BCLK 0x0214 0x055C 0x0800 0x2 0x1 +#define MX6SX_PAD_RGMII2_TD3__PWM5_OUT 0x0214 0x055C 0x0000 0x3 0x0 +#define MX6SX_PAD_RGMII2_TD3__GPIO5_IO_21 0x0214 0x055C 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_TD3__CSI2_HSYNC 0x0214 0x055C 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_TD3__SJC_JTAG_ACT 0x0214 0x055C 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_TD3__VDEC_DEBUG_27 0x0214 0x055C 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_TD3__PCIE_CTRL_DEBUG_21 0x0214 0x055C 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0x0218 0x0560 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_TX_CTL__SAI1_RX_DATA_0 0x0218 0x0560 0x07F8 0x2 0x1 +#define MX6SX_PAD_RGMII2_TX_CTL__GPIO5_IO_22 0x0218 0x0560 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_TX_CTL__CSI2_FIELD 0x0218 0x0560 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_TX_CTL__SJC_DE_B 0x0218 0x0560 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_TX_CTL__VDEC_DEBUG_28 0x0218 0x0560 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_TX_CTL__PCIE_CTRL_DEBUG_22 0x0218 0x0560 0x0000 0x9 0x0 +#define MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0x021C 0x0564 0x0000 0x0 0x0 +#define MX6SX_PAD_RGMII2_TXC__ENET2_TX_ER 0x021C 0x0564 0x0000 0x1 0x0 +#define MX6SX_PAD_RGMII2_TXC__SAI1_TX_DATA_0 0x021C 0x0564 0x0000 0x2 0x0 +#define MX6SX_PAD_RGMII2_TXC__GPIO5_IO_23 0x021C 0x0564 0x0000 0x5 0x0 +#define MX6SX_PAD_RGMII2_TXC__CSI2_PIXCLK 0x021C 0x0564 0x0000 0x6 0x0 +#define MX6SX_PAD_RGMII2_TXC__SJC_DONE 0x021C 0x0564 0x0000 0x7 0x0 +#define MX6SX_PAD_RGMII2_TXC__VDEC_DEBUG_29 0x021C 0x0564 0x0000 0x8 0x0 +#define MX6SX_PAD_RGMII2_TXC__PCIE_CTRL_DEBUG_23 0x021C 0x0564 0x0000 0x9 0x0 +#define MX6SX_PAD_SD1_CLK__USDHC1_CLK 0x0220 0x0568 0x0000 0x0 0x0 +#define MX6SX_PAD_SD1_CLK__AUDMUX_AUD5_RXFS 0x0220 0x0568 0x0668 0x1 0x1 +#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_B 0x0220 0x0568 0x0000 0x2 0x0 +#define MX6SX_PAD_SD1_CLK__GPT_CLK 0x0220 0x0568 0x0000 0x3 0x0 +#define MX6SX_PAD_SD1_CLK__WDOG2_WDOG_RST_B_DEB 0x0220 0x0568 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_CLK__GPIO6_IO_0 0x0220 0x0568 0x0000 0x5 0x0 +#define MX6SX_PAD_SD1_CLK__ENET2_1588_EVENT1_OUT 0x0220 0x0568 0x0000 0x6 0x0 +#define MX6SX_PAD_SD1_CLK__CCM_OUT1 0x0220 0x0568 0x0000 0x7 0x0 +#define MX6SX_PAD_SD1_CLK__VADC_ADC_PROC_CLK 0x0220 0x0568 0x0000 0x8 0x0 +#define MX6SX_PAD_SD1_CLK__MMDC_DEBUG_45 0x0220 0x0568 0x0000 0x9 0x0 +#define MX6SX_PAD_SD1_CMD__USDHC1_CMD 0x0224 0x056C 0x0000 0x0 0x0 +#define MX6SX_PAD_SD1_CMD__AUDMUX_AUD5_RXC 0x0224 0x056C 0x0664 0x1 0x1 +#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_B 0x0224 0x056C 0x0000 0x2 0x0 +#define MX6SX_PAD_SD1_CMD__GPT_COMPARE1 0x0224 0x056C 0x0000 0x3 0x0 +#define MX6SX_PAD_SD1_CMD__WDOG1_WDOG_RST_B_DEB 0x0224 0x056C 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_CMD__GPIO6_IO_1 0x0224 0x056C 0x0000 0x5 0x0 +#define MX6SX_PAD_SD1_CMD__ENET2_1588_EVENT1_IN 0x0224 0x056C 0x0000 0x6 0x0 +#define MX6SX_PAD_SD1_CMD__CCM_CLKO1 0x0224 0x056C 0x0000 0x7 0x0 +#define MX6SX_PAD_SD1_CMD__VADC_EXT_SYSCLK 0x0224 0x056C 0x0000 0x8 0x0 +#define MX6SX_PAD_SD1_CMD__MMDC_DEBUG_46 0x0224 0x056C 0x0000 0x9 0x0 +#define MX6SX_PAD_SD1_DATA0__USDHC1_DATA0 0x0228 0x0570 0x0000 0x0 0x0 +#define MX6SX_PAD_SD1_DATA0__AUDMUX_AUD5_RXD 0x0228 0x0570 0x065C 0x1 0x1 +#define MX6SX_PAD_SD1_DATA0__CAAM_WRAPPER_RNG_OSC_OBS 0x0228 0x0570 0x0000 0x2 0x0 +#define MX6SX_PAD_SD1_DATA0__GPT_CAPTURE1 0x0228 0x0570 0x0000 0x3 0x0 +#define MX6SX_PAD_SD1_DATA0__UART2_RX 0x0228 0x0570 0x0838 0x4 0x2 +#define MX6SX_PAD_SD1_DATA0__UART2_TX 0x0228 0x0570 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA0__GPIO6_IO_2 0x0228 0x0570 0x0000 0x5 0x0 +#define MX6SX_PAD_SD1_DATA0__ENET1_1588_EVENT1_IN 0x0228 0x0570 0x0000 0x6 0x0 +#define MX6SX_PAD_SD1_DATA0__CCM_OUT2 0x0228 0x0570 0x0000 0x7 0x0 +#define MX6SX_PAD_SD1_DATA0__VADC_CLAMP_UP 0x0228 0x0570 0x0000 0x8 0x0 +#define MX6SX_PAD_SD1_DATA0__MMDC_DEBUG_48 0x0228 0x0570 0x0000 0x9 0x0 +#define MX6SX_PAD_SD1_DATA1__USDHC1_DATA1 0x022C 0x0574 0x0000 0x0 0x0 +#define MX6SX_PAD_SD1_DATA1__AUDMUX_AUD5_TXC 0x022C 0x0574 0x066C 0x1 0x1 +#define MX6SX_PAD_SD1_DATA1__PWM4_OUT 0x022C 0x0574 0x0000 0x2 0x0 +#define MX6SX_PAD_SD1_DATA1__GPT_CAPTURE2 0x022C 0x0574 0x0000 0x3 0x0 +#define MX6SX_PAD_SD1_DATA1__UART2_RX 0x022C 0x0574 0x0838 0x4 0x3 +#define MX6SX_PAD_SD1_DATA1__UART2_TX 0x022C 0x0574 0x0000 0x4 0x0 +#define MX6SX_PAD_SD1_DATA1__GPIO6_IO_3 0x022C 0x0574 0x0000 0x5 0x0 +#define MX6SX_PAD_SD1_DATA1__ENET1_1588_EVENT1_OUT 0x022C 0x0574 0x0000 0x6 0x0 +#define MX6SX_PAD_SD1_DATA1__CCM_CLKO2 0x022C 0x0574 0x0000 0x7 0x0 +#define MX6SX_PAD_SD1_DATA1__VADC_CLAMP_DOWN 0x022C 0x0574 0x0000 0x8 0x0 +#define MX6SX_PAD_SD1_DATA1__MMDC_DEBUG_47 0x022C 0x0574 0x0000 0x9 0x0 +#define MX6SX_PAD_SD1_DATA2__USDHC1_DATA2 0x0230 0x0578 0x0000 0x0 0x0 +#define MX6SX_PAD_SD1_DATA2__AUDMUX_AUD5_TXFS 0x0230 0x0578 0x0670 0x1 0x1 +#define MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x0230 0x0578 0x0000 0x2 0x0 +#define MX6SX_PAD_SD1_DATA2__GPT_COMPARE2 0x0230 0x0578 0x0000 0x3 0x0 +#define MX6SX_PAD_SD1_DATA2__UART2_CTS_B 0x0230 0x0578 0x0834 0x4 0x2 +#define MX6SX_PAD_SD1_DATA2__GPIO6_IO_4 0x0230 0x0578 0x0000 0x5 0x0 +#define MX6SX_PAD_SD1_DATA2__ECSPI4_RDY 0x0230 0x0578 0x0000 0x6 0x0 +#define MX6SX_PAD_SD1_DATA2__CCM_OUT0 0x0230 0x0578 0x0000 0x7 0x0 +#define MX6SX_PAD_SD1_DATA2__VADC_EXT_PD_N 0x0230 0x0578 0x0000 0x8 0x0 +#define MX6SX_PAD_SD1_DATA3__USDHC1_DATA3 0x0234 0x057C 0x0000 0x0 0x0 +#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_TXD 0x0234 0x057C 0x0660 0x1 0x1 +#define MX6SX_PAD_SD1_DATA3__AUDMUX_AUD5_RXD 0x0234 0x057C 0x065C 0x2 0x2 +#define MX6SX_PAD_SD1_DATA3__GPT_COMPARE3 0x0234 0x057C 0x0000 0x3 0x0 +#define MX6SX_PAD_SD1_DATA3__UART2_RTS_B 0x0234 0x057C 0x0834 0x4 0x3 +#define MX6SX_PAD_SD1_DATA3__GPIO6_IO_5 0x0234 0x057C 0x0000 0x5 0x0 +#define MX6SX_PAD_SD1_DATA3__ECSPI4_SS1 0x0234 0x057C 0x0000 0x6 0x0 +#define MX6SX_PAD_SD1_DATA3__CCM_PMIC_RDY 0x0234 0x057C 0x069C 0x7 0x2 +#define MX6SX_PAD_SD1_DATA3__VADC_RST_N 0x0234 0x057C 0x0000 0x8 0x0 +#define MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x0238 0x0580 0x0000 0x0 0x0 +#define MX6SX_PAD_SD2_CLK__AUDMUX_AUD6_RXFS 0x0238 0x0580 0x0680 0x1 0x2 +#define MX6SX_PAD_SD2_CLK__KPP_COL_5 0x0238 0x0580 0x07C8 0x2 0x1 +#define MX6SX_PAD_SD2_CLK__ECSPI4_SCLK 0x0238 0x0580 0x0740 0x3 0x1 +#define MX6SX_PAD_SD2_CLK__MLB_SIG 0x0238 0x0580 0x07F0 0x4 0x2 +#define MX6SX_PAD_SD2_CLK__GPIO6_IO_6 0x0238 0x0580 0x0000 0x5 0x0 +#define MX6SX_PAD_SD2_CLK__MQS_RIGHT 0x0238 0x0580 0x0000 0x6 0x0 +#define MX6SX_PAD_SD2_CLK__WDOG1_WDOG_ANY 0x0238 0x0580 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_CLK__VADC_CLAMP_CURRENT_5 0x0238 0x0580 0x0000 0x8 0x0 +#define MX6SX_PAD_SD2_CLK__MMDC_DEBUG_29 0x0238 0x0580 0x0000 0x9 0x0 +#define MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x023C 0x0584 0x0000 0x0 0x0 +#define MX6SX_PAD_SD2_CMD__AUDMUX_AUD6_RXC 0x023C 0x0584 0x067C 0x1 0x2 +#define MX6SX_PAD_SD2_CMD__KPP_ROW_5 0x023C 0x0584 0x07D4 0x2 0x1 +#define MX6SX_PAD_SD2_CMD__ECSPI4_MOSI 0x023C 0x0584 0x0748 0x3 0x1 +#define MX6SX_PAD_SD2_CMD__MLB_CLK 0x023C 0x0584 0x07E8 0x4 0x2 +#define MX6SX_PAD_SD2_CMD__GPIO6_IO_7 0x023C 0x0584 0x0000 0x5 0x0 +#define MX6SX_PAD_SD2_CMD__MQS_LEFT 0x023C 0x0584 0x0000 0x6 0x0 +#define MX6SX_PAD_SD2_CMD__WDOG3_WDOG_B 0x023C 0x0584 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_CMD__VADC_CLAMP_CURRENT_4 0x023C 0x0584 0x0000 0x8 0x0 +#define MX6SX_PAD_SD2_CMD__MMDC_DEBUG_30 0x023C 0x0584 0x0000 0x9 0x0 +#define MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x0240 0x0588 0x0000 0x0 0x0 +#define MX6SX_PAD_SD2_DATA0__AUDMUX_AUD6_RXD 0x0240 0x0588 0x0674 0x1 0x2 +#define MX6SX_PAD_SD2_DATA0__KPP_ROW_7 0x0240 0x0588 0x07DC 0x2 0x1 +#define MX6SX_PAD_SD2_DATA0__PWM1_OUT 0x0240 0x0588 0x0000 0x3 0x0 +#define MX6SX_PAD_SD2_DATA0__I2C4_SDA 0x0240 0x0588 0x07C4 0x4 0x3 +#define MX6SX_PAD_SD2_DATA0__GPIO6_IO_8 0x0240 0x0588 0x0000 0x5 0x0 +#define MX6SX_PAD_SD2_DATA0__ECSPI4_SS3 0x0240 0x0588 0x0000 0x6 0x0 +#define MX6SX_PAD_SD2_DATA0__UART4_RX 0x0240 0x0588 0x0848 0x7 0x4 +#define MX6SX_PAD_SD2_DATA0__UART4_TX 0x0240 0x0588 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA0__VADC_CLAMP_CURRENT_0 0x0240 0x0588 0x0000 0x8 0x0 +#define MX6SX_PAD_SD2_DATA0__MMDC_DEBUG_50 0x0240 0x0588 0x0000 0x9 0x0 +#define MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x0244 0x058C 0x0000 0x0 0x0 +#define MX6SX_PAD_SD2_DATA1__AUDMUX_AUD6_TXC 0x0244 0x058C 0x0684 0x1 0x2 +#define MX6SX_PAD_SD2_DATA1__KPP_COL_7 0x0244 0x058C 0x07D0 0x2 0x1 +#define MX6SX_PAD_SD2_DATA1__PWM2_OUT 0x0244 0x058C 0x0000 0x3 0x0 +#define MX6SX_PAD_SD2_DATA1__I2C4_SCL 0x0244 0x058C 0x07C0 0x4 0x3 +#define MX6SX_PAD_SD2_DATA1__GPIO6_IO_9 0x0244 0x058C 0x0000 0x5 0x0 +#define MX6SX_PAD_SD2_DATA1__ECSPI4_SS2 0x0244 0x058C 0x0000 0x6 0x0 +#define MX6SX_PAD_SD2_DATA1__UART4_RX 0x0244 0x058C 0x0848 0x7 0x5 +#define MX6SX_PAD_SD2_DATA1__UART4_TX 0x0244 0x058C 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA1__VADC_CLAMP_CURRENT_1 0x0244 0x058C 0x0000 0x8 0x0 +#define MX6SX_PAD_SD2_DATA1__MMDC_DEBUG_49 0x0244 0x058C 0x0000 0x9 0x0 +#define MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x0248 0x0590 0x0000 0x0 0x0 +#define MX6SX_PAD_SD2_DATA2__AUDMUX_AUD6_TXFS 0x0248 0x0590 0x0688 0x1 0x2 +#define MX6SX_PAD_SD2_DATA2__KPP_ROW_6 0x0248 0x0590 0x07D8 0x2 0x1 +#define MX6SX_PAD_SD2_DATA2__ECSPI4_SS0 0x0248 0x0590 0x074C 0x3 0x1 +#define MX6SX_PAD_SD2_DATA2__SDMA_EXT_EVENT_0 0x0248 0x0590 0x081C 0x4 0x2 +#define MX6SX_PAD_SD2_DATA2__GPIO6_IO_10 0x0248 0x0590 0x0000 0x5 0x0 +#define MX6SX_PAD_SD2_DATA2__SPDIF_OUT 0x0248 0x0590 0x0000 0x6 0x0 +#define MX6SX_PAD_SD2_DATA2__UART6_RX 0x0248 0x0590 0x0858 0x7 0x4 +#define MX6SX_PAD_SD2_DATA2__UART6_TX 0x0248 0x0590 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA2__VADC_CLAMP_CURRENT_2 0x0248 0x0590 0x0000 0x8 0x0 +#define MX6SX_PAD_SD2_DATA2__MMDC_DEBUG_32 0x0248 0x0590 0x0000 0x9 0x0 +#define MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x024C 0x0594 0x0000 0x0 0x0 +#define MX6SX_PAD_SD2_DATA3__AUDMUX_AUD6_TXD 0x024C 0x0594 0x0678 0x1 0x2 +#define MX6SX_PAD_SD2_DATA3__KPP_COL_6 0x024C 0x0594 0x07CC 0x2 0x1 +#define MX6SX_PAD_SD2_DATA3__ECSPI4_MISO 0x024C 0x0594 0x0744 0x3 0x1 +#define MX6SX_PAD_SD2_DATA3__MLB_DATA 0x024C 0x0594 0x07EC 0x4 0x2 +#define MX6SX_PAD_SD2_DATA3__GPIO6_IO_11 0x024C 0x0594 0x0000 0x5 0x0 +#define MX6SX_PAD_SD2_DATA3__SPDIF_IN 0x024C 0x0594 0x0824 0x6 0x4 +#define MX6SX_PAD_SD2_DATA3__UART6_RX 0x024C 0x0594 0x0858 0x7 0x5 +#define MX6SX_PAD_SD2_DATA3__UART6_TX 0x024C 0x0594 0x0000 0x7 0x0 +#define MX6SX_PAD_SD2_DATA3__VADC_CLAMP_CURRENT_3 0x024C 0x0594 0x0000 0x8 0x0 +#define MX6SX_PAD_SD2_DATA3__MMDC_DEBUG_31 0x024C 0x0594 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x0250 0x0598 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_CLK__UART4_CTS_B 0x0250 0x0598 0x0844 0x1 0x0 +#define MX6SX_PAD_SD3_CLK__ECSPI4_SCLK 0x0250 0x0598 0x0740 0x2 0x0 +#define MX6SX_PAD_SD3_CLK__AUDMUX_AUD6_RXFS 0x0250 0x0598 0x0680 0x3 0x0 +#define MX6SX_PAD_SD3_CLK__LCDIF2_VSYNC 0x0250 0x0598 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_CLK__GPIO7_IO_0 0x0250 0x0598 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_CLK__LCDIF2_BUSY 0x0250 0x0598 0x07E4 0x6 0x0 +#define MX6SX_PAD_SD3_CLK__TPSMP_HDATA_29 0x0250 0x0598 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_CLK__SDMA_DEBUG_EVENT_CHANNEL_5 0x0250 0x0598 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x0254 0x059C 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_CMD__UART4_RX 0x0254 0x059C 0x0848 0x1 0x0 +#define MX6SX_PAD_SD3_CMD__UART4_TX 0x0254 0x059C 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_CMD__ECSPI4_MOSI 0x0254 0x059C 0x0748 0x2 0x0 +#define MX6SX_PAD_SD3_CMD__AUDMUX_AUD6_RXC 0x0254 0x059C 0x067C 0x3 0x0 +#define MX6SX_PAD_SD3_CMD__LCDIF2_HSYNC 0x0254 0x059C 0x07E4 0x4 0x1 +#define MX6SX_PAD_SD3_CMD__GPIO7_IO_1 0x0254 0x059C 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_CMD__LCDIF2_RS 0x0254 0x059C 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_CMD__TPSMP_HDATA_28 0x0254 0x059C 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_CMD__SDMA_DEBUG_EVENT_CHANNEL_4 0x0254 0x059C 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x0258 0x05A0 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA0__I2C4_SCL 0x0258 0x05A0 0x07C0 0x1 0x0 +#define MX6SX_PAD_SD3_DATA0__ECSPI2_SS1 0x0258 0x05A0 0x0000 0x2 0x0 +#define MX6SX_PAD_SD3_DATA0__AUDMUX_AUD6_RXD 0x0258 0x05A0 0x0674 0x3 0x0 +#define MX6SX_PAD_SD3_DATA0__LCDIF2_DATA_1 0x0258 0x05A0 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA0__GPIO7_IO_2 0x0258 0x05A0 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA0__DCIC1_OUT 0x0258 0x05A0 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA0__TPSMP_HDATA_30 0x0258 0x05A0 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA0__GPU_DEBUG_0 0x0258 0x05A0 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA0__SDMA_DEBUG_EVT_CHN_LINES_0 0x0258 0x05A0 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x025C 0x05A4 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA1__I2C4_SDA 0x025C 0x05A4 0x07C4 0x1 0x0 +#define MX6SX_PAD_SD3_DATA1__ECSPI2_SS2 0x025C 0x05A4 0x0000 0x2 0x0 +#define MX6SX_PAD_SD3_DATA1__AUDMUX_AUD6_TXC 0x025C 0x05A4 0x0684 0x3 0x0 +#define MX6SX_PAD_SD3_DATA1__LCDIF2_DATA_0 0x025C 0x05A4 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA1__GPIO7_IO_3 0x025C 0x05A4 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA1__DCIC2_OUT 0x025C 0x05A4 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA1__TPSMP_HDATA_31 0x025C 0x05A4 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA1__GPU_DEBUG_1 0x025C 0x05A4 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA1__SDMA_DEBUG_EVT_CHN_LINES_1 0x025C 0x05A4 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x0260 0x05A8 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA2__UART4_RTS_B 0x0260 0x05A8 0x0844 0x1 0x1 +#define MX6SX_PAD_SD3_DATA2__ECSPI4_SS0 0x0260 0x05A8 0x074C 0x2 0x0 +#define MX6SX_PAD_SD3_DATA2__AUDMUX_AUD6_TXFS 0x0260 0x05A8 0x0688 0x3 0x0 +#define MX6SX_PAD_SD3_DATA2__LCDIF2_CLK 0x0260 0x05A8 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA2__GPIO7_IO_4 0x0260 0x05A8 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA2__LCDIF2_WR_RWN 0x0260 0x05A8 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA2__TPSMP_HDATA_26 0x0260 0x05A8 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA2__GPU_DEBUG_2 0x0260 0x05A8 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA2__SDMA_DEBUG_EVENT_CHANNEL_2 0x0260 0x05A8 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x0264 0x05AC 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA3__UART4_RX 0x0264 0x05AC 0x0848 0x1 0x1 +#define MX6SX_PAD_SD3_DATA3__UART4_TX 0x0264 0x05AC 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_DATA3__ECSPI4_MISO 0x0264 0x05AC 0x0744 0x2 0x0 +#define MX6SX_PAD_SD3_DATA3__AUDMUX_AUD6_TXD 0x0264 0x05AC 0x0678 0x3 0x0 +#define MX6SX_PAD_SD3_DATA3__LCDIF2_ENABLE 0x0264 0x05AC 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA3__GPIO7_IO_5 0x0264 0x05AC 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA3__LCDIF2_RD_E 0x0264 0x05AC 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA3__TPSMP_HDATA_27 0x0264 0x05AC 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA3__GPU_DEBUG_3 0x0264 0x05AC 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA3__SDMA_DEBUG_EVENT_CHANNEL_3 0x0264 0x05AC 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x0268 0x05B0 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA4__CAN2_RX 0x0268 0x05B0 0x0690 0x1 0x0 +#define MX6SX_PAD_SD3_DATA4__CANFD_RX2 0x0268 0x05B0 0x0698 0x2 0x0 +#define MX6SX_PAD_SD3_DATA4__UART3_RX 0x0268 0x05B0 0x0840 0x3 0x2 +#define MX6SX_PAD_SD3_DATA4__UART3_TX 0x0268 0x05B0 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA4__LCDIF2_DATA_3 0x0268 0x05B0 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA4__GPIO7_IO_6 0x0268 0x05B0 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA4__ENET2_1588_EVENT0_IN 0x0268 0x05B0 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA4__TPSMP_HTRANS_1 0x0268 0x05B0 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA4__GPU_DEBUG_4 0x0268 0x05B0 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA4__SDMA_DEBUG_BUS_DEVICE_0 0x0268 0x05B0 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x026C 0x05B4 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA5__CAN1_TX 0x026C 0x05B4 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_DATA5__CANFD_TX1 0x026C 0x05B4 0x0000 0x2 0x0 +#define MX6SX_PAD_SD3_DATA5__UART3_RX 0x026C 0x05B4 0x0840 0x3 0x3 +#define MX6SX_PAD_SD3_DATA5__UART3_TX 0x026C 0x05B4 0x0000 0x3 0x0 +#define MX6SX_PAD_SD3_DATA5__LCDIF2_DATA_2 0x026C 0x05B4 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA5__GPIO7_IO_7 0x026C 0x05B4 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA5__ENET2_1588_EVENT0_OUT 0x026C 0x05B4 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA5__SIM_M_HWRITE 0x026C 0x05B4 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA5__GPU_DEBUG_5 0x026C 0x05B4 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA5__SDMA_DEBUG_BUS_DEVICE_1 0x026C 0x05B4 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x0270 0x05B8 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA6__CAN2_TX 0x0270 0x05B8 0x0000 0x1 0x0 +#define MX6SX_PAD_SD3_DATA6__CANFD_TX2 0x0270 0x05B8 0x0000 0x2 0x0 +#define MX6SX_PAD_SD3_DATA6__UART3_RTS_B 0x0270 0x05B8 0x083C 0x3 0x2 +#define MX6SX_PAD_SD3_DATA6__LCDIF2_DATA_4 0x0270 0x05B8 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA6__GPIO7_IO_8 0x0270 0x05B8 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA6__ENET1_1588_EVENT0_OUT 0x0270 0x05B8 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA6__TPSMP_HTRANS_0 0x0270 0x05B8 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA6__GPU_DEBUG_7 0x0270 0x05B8 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA6__SDMA_DEBUG_EVT_CHN_LINES_7 0x0270 0x05B8 0x0000 0x9 0x0 +#define MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x0274 0x05BC 0x0000 0x0 0x0 +#define MX6SX_PAD_SD3_DATA7__CAN1_RX 0x0274 0x05BC 0x068C 0x1 0x0 +#define MX6SX_PAD_SD3_DATA7__CANFD_RX1 0x0274 0x05BC 0x0694 0x2 0x0 +#define MX6SX_PAD_SD3_DATA7__UART3_CTS_B 0x0274 0x05BC 0x083C 0x3 0x3 +#define MX6SX_PAD_SD3_DATA7__LCDIF2_DATA_5 0x0274 0x05BC 0x0000 0x4 0x0 +#define MX6SX_PAD_SD3_DATA7__GPIO7_IO_9 0x0274 0x05BC 0x0000 0x5 0x0 +#define MX6SX_PAD_SD3_DATA7__ENET1_1588_EVENT0_IN 0x0274 0x05BC 0x0000 0x6 0x0 +#define MX6SX_PAD_SD3_DATA7__TPSMP_HDATA_DIR 0x0274 0x05BC 0x0000 0x7 0x0 +#define MX6SX_PAD_SD3_DATA7__GPU_DEBUG_6 0x0274 0x05BC 0x0000 0x8 0x0 +#define MX6SX_PAD_SD3_DATA7__SDMA_DEBUG_EVT_CHN_LINES_2 0x0274 0x05BC 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x0278 0x05C0 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_CLK__RAWNAND_DATA15 0x0278 0x05C0 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_CLK__ECSPI2_MISO 0x0278 0x05C0 0x0724 0x2 0x1 +#define MX6SX_PAD_SD4_CLK__AUDMUX_AUD3_RXFS 0x0278 0x05C0 0x0638 0x3 0x0 +#define MX6SX_PAD_SD4_CLK__LCDIF2_DATA_13 0x0278 0x05C0 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_CLK__GPIO6_IO_12 0x0278 0x05C0 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_CLK__ECSPI3_SS2 0x0278 0x05C0 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_CLK__TPSMP_HDATA_20 0x0278 0x05C0 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_CLK__VDEC_DEBUG_12 0x0278 0x05C0 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_CLK__SDMA_DEBUG_EVENT_CHANNEL_SEL 0x0278 0x05C0 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x027C 0x05C4 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_CMD__RAWNAND_DATA14 0x027C 0x05C4 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_CMD__ECSPI2_MOSI 0x027C 0x05C4 0x0728 0x2 0x1 +#define MX6SX_PAD_SD4_CMD__AUDMUX_AUD3_RXC 0x027C 0x05C4 0x0634 0x3 0x0 +#define MX6SX_PAD_SD4_CMD__LCDIF2_DATA_14 0x027C 0x05C4 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_CMD__GPIO6_IO_13 0x027C 0x05C4 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_CMD__ECSPI3_SS1 0x027C 0x05C4 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_CMD__TPSMP_HDATA_19 0x027C 0x05C4 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_CMD__VDEC_DEBUG_11 0x027C 0x05C4 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_CMD__SDMA_DEBUG_CORE_RUN 0x027C 0x05C4 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x0280 0x05C8 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA0__RAWNAND_DATA10 0x0280 0x05C8 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA0__ECSPI2_SS0 0x0280 0x05C8 0x072C 0x2 0x1 +#define MX6SX_PAD_SD4_DATA0__AUDMUX_AUD3_RXD 0x0280 0x05C8 0x062C 0x3 0x0 +#define MX6SX_PAD_SD4_DATA0__LCDIF2_DATA_12 0x0280 0x05C8 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA0__GPIO6_IO_14 0x0280 0x05C8 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA0__ECSPI3_SS3 0x0280 0x05C8 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_DATA0__TPSMP_HDATA_21 0x0280 0x05C8 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA0__VDEC_DEBUG_13 0x0280 0x05C8 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA0__SDMA_DEBUG_MODE 0x0280 0x05C8 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x0284 0x05CC 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA1__RAWNAND_DATA11 0x0284 0x05CC 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA1__ECSPI2_SCLK 0x0284 0x05CC 0x0720 0x2 0x1 +#define MX6SX_PAD_SD4_DATA1__AUDMUX_AUD3_TXC 0x0284 0x05CC 0x063C 0x3 0x0 +#define MX6SX_PAD_SD4_DATA1__LCDIF2_DATA_11 0x0284 0x05CC 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA1__GPIO6_IO_15 0x0284 0x05CC 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA1__ECSPI3_RDY 0x0284 0x05CC 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_DATA1__TPSMP_HDATA_22 0x0284 0x05CC 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA1__VDEC_DEBUG_14 0x0284 0x05CC 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA1__SDMA_DEBUG_BUS_ERROR 0x0284 0x05CC 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x0288 0x05D0 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA2__RAWNAND_DATA12 0x0288 0x05D0 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA2__I2C2_SDA 0x0288 0x05D0 0x07B4 0x2 0x0 +#define MX6SX_PAD_SD4_DATA2__AUDMUX_AUD3_TXFS 0x0288 0x05D0 0x0640 0x3 0x0 +#define MX6SX_PAD_SD4_DATA2__LCDIF2_DATA_10 0x0288 0x05D0 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA2__GPIO6_IO_16 0x0288 0x05D0 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA2__ECSPI2_SS3 0x0288 0x05D0 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_DATA2__TPSMP_HDATA_23 0x0288 0x05D0 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA2__VDEC_DEBUG_15 0x0288 0x05D0 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA2__SDMA_DEBUG_BUS_RWB 0x0288 0x05D0 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x028C 0x05D4 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA3__RAWNAND_DATA13 0x028C 0x05D4 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA3__I2C2_SCL 0x028C 0x05D4 0x07B0 0x2 0x0 +#define MX6SX_PAD_SD4_DATA3__AUDMUX_AUD3_TXD 0x028C 0x05D4 0x0630 0x3 0x0 +#define MX6SX_PAD_SD4_DATA3__LCDIF2_DATA_9 0x028C 0x05D4 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA3__GPIO6_IO_17 0x028C 0x05D4 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA3__ECSPI2_RDY 0x028C 0x05D4 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_DATA3__TPSMP_HDATA_24 0x028C 0x05D4 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA3__VDEC_DEBUG_16 0x028C 0x05D4 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA3__SDMA_DEBUG_MATCHED_DMBUS 0x028C 0x05D4 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA4__USDHC4_DATA4 0x0290 0x05D8 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA4__RAWNAND_DATA09 0x0290 0x05D8 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA4__UART5_RX 0x0290 0x05D8 0x0850 0x2 0x0 +#define MX6SX_PAD_SD4_DATA4__UART5_TX 0x0290 0x05D8 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA4__ECSPI3_SCLK 0x0290 0x05D8 0x0730 0x3 0x0 +#define MX6SX_PAD_SD4_DATA4__LCDIF2_DATA_8 0x0290 0x05D8 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA4__GPIO6_IO_18 0x0290 0x05D8 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA4__SPDIF_OUT 0x0290 0x05D8 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_DATA4__TPSMP_HDATA_16 0x0290 0x05D8 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA4__USB_OTG_HOST_MODE 0x0290 0x05D8 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA4__SDMA_DEBUG_RTBUFFER_WRITE 0x0290 0x05D8 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA5__USDHC4_DATA5 0x0294 0x05DC 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA5__RAWNAND_CE2_B 0x0294 0x05DC 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA5__UART5_RX 0x0294 0x05DC 0x0850 0x2 0x1 +#define MX6SX_PAD_SD4_DATA5__UART5_TX 0x0294 0x05DC 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_DATA5__ECSPI3_MOSI 0x0294 0x05DC 0x0738 0x3 0x0 +#define MX6SX_PAD_SD4_DATA5__LCDIF2_DATA_7 0x0294 0x05DC 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA5__GPIO6_IO_19 0x0294 0x05DC 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA5__SPDIF_IN 0x0294 0x05DC 0x0824 0x6 0x0 +#define MX6SX_PAD_SD4_DATA5__TPSMP_HDATA_17 0x0294 0x05DC 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA5__VDEC_DEBUG_9 0x0294 0x05DC 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA5__SDMA_DEBUG_EVENT_CHANNEL_0 0x0294 0x05DC 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA6__USDHC4_DATA6 0x0298 0x05E0 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA6__RAWNAND_CE3_B 0x0298 0x05E0 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA6__UART5_RTS_B 0x0298 0x05E0 0x084C 0x2 0x0 +#define MX6SX_PAD_SD4_DATA6__ECSPI3_MISO 0x0298 0x05E0 0x0734 0x3 0x0 +#define MX6SX_PAD_SD4_DATA6__LCDIF2_DATA_6 0x0298 0x05E0 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x0298 0x05E0 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA6__USDHC4_WP 0x0298 0x05E0 0x0878 0x6 0x0 +#define MX6SX_PAD_SD4_DATA6__TPSMP_HDATA_18 0x0298 0x05E0 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA6__VDEC_DEBUG_10 0x0298 0x05E0 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA6__SDMA_DEBUG_EVENT_CHANNEL_1 0x0298 0x05E0 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_DATA7__USDHC4_DATA7 0x029C 0x05E4 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_DATA7__RAWNAND_DATA08 0x029C 0x05E4 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_DATA7__UART5_CTS_B 0x029C 0x05E4 0x084C 0x2 0x1 +#define MX6SX_PAD_SD4_DATA7__ECSPI3_SS0 0x029C 0x05E4 0x073C 0x3 0x0 +#define MX6SX_PAD_SD4_DATA7__LCDIF2_DATA_15 0x029C 0x05E4 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x029C 0x05E4 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_DATA7__USDHC4_CD_B 0x029C 0x05E4 0x0874 0x6 0x0 +#define MX6SX_PAD_SD4_DATA7__TPSMP_HDATA_15 0x029C 0x05E4 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_DATA7__USB_OTG_PWR_WAKE 0x029C 0x05E4 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_DATA7__SDMA_DEBUG_YIELD 0x029C 0x05E4 0x0000 0x9 0x0 +#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET_B 0x02A0 0x05E8 0x0000 0x0 0x0 +#define MX6SX_PAD_SD4_RESET_B__RAWNAND_DQS 0x02A0 0x05E8 0x0000 0x1 0x0 +#define MX6SX_PAD_SD4_RESET_B__USDHC4_RESET 0x02A0 0x05E8 0x0000 0x2 0x0 +#define MX6SX_PAD_SD4_RESET_B__AUDMUX_MCLK 0x02A0 0x05E8 0x0000 0x3 0x0 +#define MX6SX_PAD_SD4_RESET_B__LCDIF2_RESET 0x02A0 0x05E8 0x0000 0x4 0x0 +#define MX6SX_PAD_SD4_RESET_B__GPIO6_IO_22 0x02A0 0x05E8 0x0000 0x5 0x0 +#define MX6SX_PAD_SD4_RESET_B__LCDIF2_CS 0x02A0 0x05E8 0x0000 0x6 0x0 +#define MX6SX_PAD_SD4_RESET_B__TPSMP_HDATA_25 0x02A0 0x05E8 0x0000 0x7 0x0 +#define MX6SX_PAD_SD4_RESET_B__VDEC_DEBUG_17 0x02A0 0x05E8 0x0000 0x8 0x0 +#define MX6SX_PAD_SD4_RESET_B__SDMA_DEBUG_BUS_DEVICE_2 0x02A0 0x05E8 0x0000 0x9 0x0 +#define MX6SX_PAD_USB_H_DATA__USB_H_DATA 0x02A4 0x05EC 0x0000 0x0 0x0 +#define MX6SX_PAD_USB_H_DATA__PWM2_OUT 0x02A4 0x05EC 0x0000 0x1 0x0 +#define MX6SX_PAD_USB_H_DATA__ANATOP_24M_OUT 0x02A4 0x05EC 0x0000 0x2 0x0 +#define MX6SX_PAD_USB_H_DATA__I2C4_SDA 0x02A4 0x05EC 0x07C4 0x3 0x1 +#define MX6SX_PAD_USB_H_DATA__WDOG3_WDOG_B 0x02A4 0x05EC 0x0000 0x4 0x0 +#define MX6SX_PAD_USB_H_DATA__GPIO7_IO_10 0x02A4 0x05EC 0x0000 0x5 0x0 +#define MX6SX_PAD_USB_H_STROBE__USB_H_STROBE 0x02A8 0x05F0 0x0000 0x0 0x0 +#define MX6SX_PAD_USB_H_STROBE__PWM1_OUT 0x02A8 0x05F0 0x0000 0x1 0x0 +#define MX6SX_PAD_USB_H_STROBE__ANATOP_32K_OUT 0x02A8 0x05F0 0x0000 0x2 0x0 +#define MX6SX_PAD_USB_H_STROBE__I2C4_SCL 0x02A8 0x05F0 0x07C0 0x3 0x1 +#define MX6SX_PAD_USB_H_STROBE__WDOG3_WDOG_RST_B_DEB 0x02A8 0x05F0 0x0000 0x4 0x0 +#define MX6SX_PAD_USB_H_STROBE__GPIO7_IO_11 0x02A8 0x05F0 0x0000 0x5 0x0 + +#endif /* __DTS_IMX6SX_PINFUNC_H */ diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts new file mode 100644 index 0000000000000000000000000000000000000000..a3980d9705905446c01218ceafaf729890377456 --- /dev/null +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -0,0 +1,479 @@ +/* + * Copyright (C) 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; + +#include +#include +#include "imx6sx.dtsi" + +/ { + model = "Freescale i.MX6 SoloX SDB Board"; + compatible = "fsl,imx6sx-sdb", "fsl,imx6sx"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x80000000 0x40000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_keys>; + + volume-up { + label = "Volume Up"; + gpios = <&gpio1 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + volume-down { + label = "Volume Down"; + gpios = <&gpio1 19 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vcc_sd3: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_vcc_sd3>; + regulator-name = "VCC_SD3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg1_vbus: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1>; + regulator-name = "usb_otg1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_usb_otg2_vbus: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg2>; + regulator-name = "usb_otg2_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_psu_5v: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "PSU-5V0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + + sound { + compatible = "fsl,imx6sx-sdb-wm8962", "fsl,imx-audio-wm8962"; + model = "wm8962-audio"; + ssi-controller = <&ssi2>; + audio-codec = <&codec>; + audio-routing = + "Headphone Jack", "HPOUTL", + "Headphone Jack", "HPOUTR", + "Ext Spk", "SPKOUTL", + "Ext Spk", "SPKOUTR", + "AMIC", "MICBIAS", + "IN3R", "AMIC"; + mux-int-port = <2>; + mux-ext-port = <6>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "okay"; +}; + +&fec1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet1>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + pmic: pfuze100@08 { + compatible = "fsl,pfuze100"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1ab { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw1c_reg: sw1c { + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <1875000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3a { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3b_reg: sw3b { + regulator-min-microvolt = <400000>; + regulator-max-microvolt = <1975000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <3300000>; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vgen1 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + regulator-always-on; + }; + + vgen2_reg: vgen2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vgen3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: vgen4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen5_reg: vgen5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vgen6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; +}; + +&i2c4 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c4>; + status = "okay"; + + codec: wm8962@1a { + compatible = "wlf,wm8962"; + reg = <0x1a>; + clocks = <&clks IMX6SX_CLK_AUDIO>; + DCVDD-supply = <&vgen4_reg>; + DBVDD-supply = <&vgen4_reg>; + AVDD-supply = <&vgen4_reg>; + CPVDD-supply = <&vgen4_reg>; + MICVDD-supply = <&vgen3_reg>; + PLLVDD-supply = <&vgen4_reg>; + SPKVDD1-supply = <®_psu_5v>; + SPKVDD2-supply = <®_psu_5v>; + }; +}; + +&ssi2 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart5 { /* for bluetooth */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + fsl,uart-has-rtscts; + status = "okay"; +}; + +&usbotg1 { + vbus-supply = <®_usb_otg1_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb_otg1_id>; + status = "okay"; +}; + +&usbotg2 { + vbus-supply = <®_usb_otg2_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + non-removable; + no-1-8-v; + keep-power-in-suspend; + enable-sdio-wakeup; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc3>; + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; + bus-width = <8>; + cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + enable-sdio-wakeup; + vmmc-supply = <&vcc_sd3>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&iomuxc { + imx6x-sdb { + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA00__AUDMUX_AUD6_TXC 0x130b0 + MX6SX_PAD_CSI_DATA01__AUDMUX_AUD6_TXFS 0x130b0 + MX6SX_PAD_CSI_HSYNC__AUDMUX_AUD6_TXD 0x120b0 + MX6SX_PAD_CSI_VSYNC__AUDMUX_AUD6_RXD 0x130b0 + MX6SX_PAD_CSI_PIXCLK__AUDMUX_MCLK 0x130b0 + >; + }; + + pinctrl_enet1: enet1grp { + fsl,pins = < + MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1 + MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1 + MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1 + MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1 + MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081 + MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 + >; + }; + + pinctrl_gpio_keys: gpio_keysgrp { + fsl,pins = < + MX6SX_PAD_CSI_DATA04__GPIO1_IO_18 0x17059 + MX6SX_PAD_CSI_DATA05__GPIO1_IO_19 0x17059 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO01__I2C1_SDA 0x4001b8b1 + MX6SX_PAD_GPIO1_IO00__I2C1_SCL 0x4001b8b1 + >; + }; + + pinctrl_i2c4: i2c4grp { + fsl,pins = < + MX6SX_PAD_CSI_DATA07__I2C4_SDA 0x4001b8b1 + MX6SX_PAD_CSI_DATA06__I2C4_SCL 0x4001b8b1 + >; + }; + + pinctrl_vcc_sd3: vccsd3grp { + fsl,pins = < + MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1 + MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5grp { + fsl,pins = < + MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1 + MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1 + MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1 + MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1 + >; + }; + + pinctrl_usb_otg1: usbotg1grp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO09__GPIO1_IO_9 0x10b0 + >; + }; + + pinctrl_usb_otg1_id: usbotg1idgrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO10__ANATOP_OTG1_ID 0x17059 + >; + }; + + pinctrl_usb_otg2: usbot2ggrp { + fsl,pins = < + MX6SX_PAD_GPIO1_IO12__GPIO1_IO_12 0x10b0 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059 + MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059 + MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059 + MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059 + MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059 + MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059 + MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */ + MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */ + >; + }; + + pinctrl_usdhc3_100mhz: usdhc3grp-100mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9 + >; + }; + + pinctrl_usdhc3_200mhz: usdhc3grp-200mhz { + fsl,pins = < + MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9 + MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9 + MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9 + MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9 + MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9 + MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9 + MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9 + MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9 + MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9 + MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059 + MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059 + MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059 + MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059 + MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059 + MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059 + MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */ + MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */ + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..f4b9da65bc0f19e65ed1c2aa71cb1f11f447757c --- /dev/null +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -0,0 +1,1208 @@ +/* + * Copyright 2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include "imx6sx-pinfunc.h" +#include "skeleton.dtsi" + +/ { + aliases { + can0 = &flexcan1; + can1 = &flexcan2; + ethernet0 = &fec1; + ethernet1 = &fec2; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + gpio5 = &gpio6; + gpio6 = &gpio7; + i2c0 = &i2c1; + i2c1 = &i2c2; + i2c2 = &i2c3; + i2c3 = &i2c4; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + mmc2 = &usdhc3; + mmc3 = &usdhc4; + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; + serial3 = &uart4; + serial4 = &uart5; + serial5 = &uart6; + spi0 = &ecspi1; + spi1 = &ecspi2; + spi2 = &ecspi3; + spi3 = &ecspi4; + spi4 = &ecspi5; + usbphy0 = &usbphy1; + usbphy1 = &usbphy2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu0: cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 996000 1250000 + 792000 1175000 + 396000 1075000 + >; + fsl,soc-operating-points = < + /* ARM kHz SOC uV */ + 996000 1175000 + 792000 1175000 + 396000 1175000 + >; + clock-latency = <61036>; /* two CLK32 periods */ + clocks = <&clks IMX6SX_CLK_ARM>, + <&clks IMX6SX_CLK_PLL2_PFD2>, + <&clks IMX6SX_CLK_STEP>, + <&clks IMX6SX_CLK_PLL1_SW>, + <&clks IMX6SX_CLK_PLL1_SYS>; + clock-names = "arm", "pll2_pfd2_396m", "step", + "pll1_sw", "pll1_sys"; + arm-supply = <®_arm>; + soc-supply = <®_soc>; + }; + }; + + intc: interrupt-controller@00a01000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x00a01000 0x1000>, + <0x00a00100 0x100>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ckil: clock@0 { + compatible = "fixed-clock"; + reg = <0>; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "ckil"; + }; + + osc: clock@1 { + compatible = "fixed-clock"; + reg = <1>; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc"; + }; + + ipp_di0: clock@2 { + compatible = "fixed-clock"; + reg = <2>; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di0"; + }; + + ipp_di1: clock@3 { + compatible = "fixed-clock"; + reg = <3>; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "ipp_di1"; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&intc>; + ranges; + + pmu { + compatible = "arm,cortex-a9-pmu"; + interrupts = ; + }; + + ocram: sram@00900000 { + compatible = "mmio-sram"; + reg = <0x00900000 0x20000>; + clocks = <&clks IMX6SX_CLK_OCRAM>; + }; + + L2: l2-cache@00a02000 { + compatible = "arm,pl310-cache"; + reg = <0x00a02000 0x1000>; + interrupts = ; + cache-unified; + cache-level = <2>; + arm,tag-latency = <4 2 3>; + arm,data-latency = <4 2 3>; + }; + + dma_apbh: dma-apbh@01804000 { + compatible = "fsl,imx6sx-dma-apbh", "fsl,imx28-dma-apbh"; + reg = <0x01804000 0x2000>; + interrupts = , + , + , + ; + interrupt-names = "gpmi0", "gpmi1", "gpmi2", "gpmi3"; + #dma-cells = <1>; + dma-channels = <4>; + clocks = <&clks IMX6SX_CLK_APBH_DMA>; + }; + + gpmi: gpmi-nand@01806000{ + compatible = "fsl,imx6sx-gpmi-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x01806000 0x2000>, <0x01808000 0x4000>; + reg-names = "gpmi-nand", "bch"; + interrupts = ; + interrupt-names = "bch"; + clocks = <&clks IMX6SX_CLK_GPMI_IO>, + <&clks IMX6SX_CLK_GPMI_APB>, + <&clks IMX6SX_CLK_GPMI_BCH>, + <&clks IMX6SX_CLK_GPMI_BCH_APB>, + <&clks IMX6SX_CLK_PER1_BCH>; + clock-names = "gpmi_io", "gpmi_apb", "gpmi_bch", + "gpmi_bch_apb", "per1_bch"; + dmas = <&dma_apbh 0>; + dma-names = "rx-tx"; + status = "disabled"; + }; + + aips1: aips-bus@02000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x100000>; + ranges; + + spba-bus@02000000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02000000 0x40000>; + ranges; + + spdif: spdif@02004000 { + compatible = "fsl,imx6sx-spdif", "fsl,imx35-spdif"; + reg = <0x02004000 0x4000>; + interrupts = ; + dmas = <&sdma 14 18 0>, + <&sdma 15 18 0>; + dma-names = "rx", "tx"; + clocks = <&clks IMX6SX_CLK_SPDIF>, + <&clks IMX6SX_CLK_OSC>, + <&clks IMX6SX_CLK_SPDIF>, + <&clks 0>, <&clks 0>, <&clks 0>, + <&clks IMX6SX_CLK_IPG>, + <&clks 0>, <&clks 0>, + <&clks IMX6SX_CLK_SPBA>; + clock-names = "core", "rxtx0", + "rxtx1", "rxtx2", + "rxtx3", "rxtx4", + "rxtx5", "rxtx6", + "rxtx7", "dma"; + status = "disabled"; + }; + + ecspi1: ecspi@02008000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x02008000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_ECSPI1>, + <&clks IMX6SX_CLK_ECSPI1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi2: ecspi@0200c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x0200c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_ECSPI2>, + <&clks IMX6SX_CLK_ECSPI2>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi3: ecspi@02010000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x02010000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_ECSPI3>, + <&clks IMX6SX_CLK_ECSPI3>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + ecspi4: ecspi@02014000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x02014000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_ECSPI4>, + <&clks IMX6SX_CLK_ECSPI4>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart1: serial@02020000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x02020000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 25 4 0>, <&sdma 26 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + esai: esai@02024000 { + reg = <0x02024000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_ESAI_IPG>, + <&clks IMX6SX_CLK_ESAI_MEM>, + <&clks IMX6SX_CLK_ESAI_EXTAL>, + <&clks IMX6SX_CLK_ESAI_IPG>, + <&clks IMX6SX_CLK_SPBA>; + clock-names = "core", "mem", "extal", + "fsys", "dma"; + status = "disabled"; + }; + + ssi1: ssi@02028000 { + compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; + reg = <0x02028000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_SSI1_IPG>, + <&clks IMX6SX_CLK_SSI1>; + clock-names = "ipg", "baud"; + dmas = <&sdma 37 1 0>, <&sdma 38 1 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + ssi2: ssi@0202c000 { + compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; + reg = <0x0202c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_SSI2_IPG>, + <&clks IMX6SX_CLK_SSI2>; + clock-names = "ipg", "baud"; + dmas = <&sdma 41 1 0>, <&sdma 42 1 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + ssi3: ssi@02030000 { + compatible = "fsl,imx6sx-ssi", "fsl,imx51-ssi"; + reg = <0x02030000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_SSI3_IPG>, + <&clks IMX6SX_CLK_SSI3>; + clock-names = "ipg", "baud"; + dmas = <&sdma 45 1 0>, <&sdma 46 1 0>; + dma-names = "rx", "tx"; + fsl,fifo-depth = <15>; + status = "disabled"; + }; + + asrc: asrc@02034000 { + reg = <0x02034000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_ASRC_MEM>, + <&clks IMX6SX_CLK_ASRC_IPG>, + <&clks IMX6SX_CLK_SPDIF>, + <&clks IMX6SX_CLK_SPBA>; + clock-names = "mem", "ipg", "asrck", "dma"; + dmas = <&sdma 17 20 1>, <&sdma 18 20 1>, + <&sdma 19 20 1>, <&sdma 20 20 1>, + <&sdma 21 20 1>, <&sdma 22 20 1>; + dma-names = "rxa", "rxb", "rxc", + "txa", "txb", "txc"; + status = "okay"; + }; + }; + + pwm1: pwm@02080000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x02080000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM1>, + <&clks IMX6SX_CLK_PWM1>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm2: pwm@02084000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x02084000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM2>, + <&clks IMX6SX_CLK_PWM2>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm3: pwm@02088000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x02088000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM3>, + <&clks IMX6SX_CLK_PWM3>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm4: pwm@0208c000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x0208c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM4>, + <&clks IMX6SX_CLK_PWM4>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + flexcan1: can@02090000 { + compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02090000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_CAN1_IPG>, + <&clks IMX6SX_CLK_CAN1_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + flexcan2: can@02094000 { + compatible = "fsl,imx6sx-flexcan", "fsl,imx6q-flexcan"; + reg = <0x02094000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_CAN2_IPG>, + <&clks IMX6SX_CLK_CAN2_SERIAL>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + gpt: gpt@02098000 { + compatible = "fsl,imx6sx-gpt", "fsl,imx31-gpt"; + reg = <0x02098000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_GPT_BUS>, + <&clks IMX6SX_CLK_GPT_SERIAL>; + clock-names = "ipg", "per"; + }; + + gpio1: gpio@0209c000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x0209c000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio@020a0000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020a0000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio@020a4000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020a4000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio@020a8000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020a8000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio@020ac000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020ac000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio@020b0000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020b0000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio@020b4000 { + compatible = "fsl,imx6sx-gpio", "fsl,imx35-gpio"; + reg = <0x020b4000 0x4000>; + interrupts = , + ; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + kpp: kpp@020b8000 { + compatible = "fsl,imx6sx-kpp", "fsl,imx21-kpp"; + reg = <0x020b8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_DUMMY>; + status = "disabled"; + }; + + wdog1: wdog@020bc000 { + compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; + reg = <0x020bc000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_DUMMY>; + }; + + wdog2: wdog@020c0000 { + compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; + reg = <0x020c0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_DUMMY>; + status = "disabled"; + }; + + clks: ccm@020c4000 { + compatible = "fsl,imx6sx-ccm"; + reg = <0x020c4000 0x4000>; + interrupts = , + ; + #clock-cells = <1>; + clocks = <&ckil>, <&osc>, <&ipp_di0>, <&ipp_di1>; + clock-names = "ckil", "osc", "ipp_di0", "ipp_di1"; + }; + + anatop: anatop@020c8000 { + compatible = "fsl,imx6sx-anatop", "fsl,imx6q-anatop", + "syscon", "simple-bus"; + reg = <0x020c8000 0x1000>; + interrupts = , + , + ; + + regulator-1p1@110 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd1p1"; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1375000>; + regulator-always-on; + anatop-reg-offset = <0x110>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <4>; + anatop-min-voltage = <800000>; + anatop-max-voltage = <1375000>; + }; + + regulator-3p0@120 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd3p0"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + anatop-reg-offset = <0x120>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2625000>; + anatop-max-voltage = <3400000>; + }; + + regulator-2p5@130 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vdd2p5"; + regulator-min-microvolt = <2100000>; + regulator-max-microvolt = <2875000>; + regulator-always-on; + anatop-reg-offset = <0x130>; + anatop-vol-bit-shift = <8>; + anatop-vol-bit-width = <5>; + anatop-min-bit-val = <0>; + anatop-min-voltage = <2100000>; + anatop-max-voltage = <2875000>; + }; + + reg_arm: regulator-vddcore@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddarm"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <0>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <24>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_pcie: regulator-vddpcie@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddpcie"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <9>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <26>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + + reg_soc: regulator-vddsoc@140 { + compatible = "fsl,anatop-regulator"; + regulator-name = "vddsoc"; + regulator-min-microvolt = <725000>; + regulator-max-microvolt = <1450000>; + regulator-always-on; + anatop-reg-offset = <0x140>; + anatop-vol-bit-shift = <18>; + anatop-vol-bit-width = <5>; + anatop-delay-reg-offset = <0x170>; + anatop-delay-bit-shift = <28>; + anatop-delay-bit-width = <2>; + anatop-min-bit-val = <1>; + anatop-min-voltage = <725000>; + anatop-max-voltage = <1450000>; + }; + }; + + tempmon: tempmon { + compatible = "fsl,imx6sx-tempmon", "fsl,imx6q-tempmon"; + interrupts = ; + fsl,tempmon = <&anatop>; + fsl,tempmon-data = <&ocotp>; + clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>; + }; + + usbphy1: usbphy@020c9000 { + compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; + reg = <0x020c9000 0x1000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USBPHY1>; + fsl,anatop = <&anatop>; + }; + + usbphy2: usbphy@020ca000 { + compatible = "fsl,imx6sx-usbphy", "fsl,imx23-usbphy"; + reg = <0x020ca000 0x1000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USBPHY2>; + fsl,anatop = <&anatop>; + }; + + snvs: snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x020cc000 0x4000>; + + snvs-rtc-lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + interrupts = , ; + }; + }; + + epit1: epit@020d0000 { + reg = <0x020d0000 0x4000>; + interrupts = ; + }; + + epit2: epit@020d4000 { + reg = <0x020d4000 0x4000>; + interrupts = ; + }; + + src: src@020d8000 { + compatible = "fsl,imx6sx-src", "fsl,imx51-src"; + reg = <0x020d8000 0x4000>; + interrupts = , + ; + #reset-cells = <1>; + }; + + gpc: gpc@020dc000 { + compatible = "fsl,imx6sx-gpc", "fsl,imx6q-gpc"; + reg = <0x020dc000 0x4000>; + interrupts = ; + }; + + iomuxc: iomuxc@020e0000 { + compatible = "fsl,imx6sx-iomuxc"; + reg = <0x020e0000 0x4000>; + }; + + gpr: iomuxc-gpr@020e4000 { + compatible = "fsl,imx6sx-iomuxc-gpr", + "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e4000 0x4000>; + }; + + sdma: sdma@020ec000 { + compatible = "fsl,imx6sx-sdma", "fsl,imx6q-sdma"; + reg = <0x020ec000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_SDMA>, + <&clks IMX6SX_CLK_SDMA>; + clock-names = "ipg", "ahb"; + #dma-cells = <3>; + /* imx6sx reuses imx6q sdma firmware */ + fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin"; + }; + }; + + aips2: aips-bus@02100000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02100000 0x100000>; + ranges; + + usbotg1: usb@02184000 { + compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; + reg = <0x02184000 0x200>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USBOH3>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc 0>; + fsl,anatop = <&anatop>; + status = "disabled"; + }; + + usbotg2: usb@02184200 { + compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; + reg = <0x02184200 0x200>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USBOH3>; + fsl,usbphy = <&usbphy2>; + fsl,usbmisc = <&usbmisc 1>; + status = "disabled"; + }; + + usbh: usb@02184400 { + compatible = "fsl,imx6sx-usb", "fsl,imx27-usb"; + reg = <0x02184400 0x200>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USBOH3>; + fsl,usbmisc = <&usbmisc 2>; + phy_type = "hsic"; + fsl,anatop = <&anatop>; + status = "disabled"; + }; + + usbmisc: usbmisc@02184800 { + #index-cells = <1>; + compatible = "fsl,imx6sx-usbmisc", "fsl,imx6q-usbmisc"; + reg = <0x02184800 0x200>; + clocks = <&clks IMX6SX_CLK_USBOH3>; + }; + + fec1: ethernet@02188000 { + compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; + reg = <0x02188000 0x4000>; + interrupts = , + ; + clocks = <&clks IMX6SX_CLK_ENET>, + <&clks IMX6SX_CLK_ENET_AHB>, + <&clks IMX6SX_CLK_ENET_PTP>, + <&clks IMX6SX_CLK_ENET_REF>, + <&clks IMX6SX_CLK_ENET_PTP>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + status = "disabled"; + }; + + mlb: mlb@0218c000 { + reg = <0x0218c000 0x4000>; + interrupts = , + , + ; + clocks = <&clks IMX6SX_CLK_MLB>; + status = "disabled"; + }; + + usdhc1: usdhc@02190000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x02190000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USDHC1>, + <&clks IMX6SX_CLK_USDHC1>, + <&clks IMX6SX_CLK_USDHC1>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc2: usdhc@02194000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x02194000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USDHC2>, + <&clks IMX6SX_CLK_USDHC2>, + <&clks IMX6SX_CLK_USDHC2>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc3: usdhc@02198000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x02198000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USDHC3>, + <&clks IMX6SX_CLK_USDHC3>, + <&clks IMX6SX_CLK_USDHC3>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + usdhc4: usdhc@0219c000 { + compatible = "fsl,imx6sx-usdhc", "fsl,imx6sl-usdhc"; + reg = <0x0219c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_USDHC4>, + <&clks IMX6SX_CLK_USDHC4>, + <&clks IMX6SX_CLK_USDHC4>; + clock-names = "ipg", "ahb", "per"; + bus-width = <4>; + status = "disabled"; + }; + + i2c1: i2c@021a0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021a0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@021a4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021a4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@021a8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021a8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_I2C3>; + status = "disabled"; + }; + + mmdc: mmdc@021b0000 { + compatible = "fsl,imx6sx-mmdc", "fsl,imx6q-mmdc"; + reg = <0x021b0000 0x4000>; + }; + + fec2: ethernet@021b4000 { + compatible = "fsl,imx6sx-fec"; + reg = <0x021b4000 0x4000>; + interrupts = , + ; + clocks = <&clks IMX6SX_CLK_ENET>, + <&clks IMX6SX_CLK_ENET_AHB>, + <&clks IMX6SX_CLK_ENET_PTP>, + <&clks IMX6SX_CLK_ENET2_REF_125M>, + <&clks IMX6SX_CLK_ENET_PTP>; + clock-names = "ipg", "ahb", "ptp", + "enet_clk_ref", "enet_out"; + status = "disabled"; + }; + + weim: weim@021b8000 { + compatible = "fsl,imx6sx-weim", "fsl,imx6q-weim"; + reg = <0x021b8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_EIM_SLOW>; + }; + + ocotp: ocotp@021bc000 { + compatible = "fsl,imx6sx-ocotp", "syscon"; + reg = <0x021bc000 0x4000>; + clocks = <&clks IMX6SX_CLK_OCOTP>; + }; + + sai1: sai@021d4000 { + compatible = "fsl,imx6sx-sai"; + reg = <0x021d4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_SAI1_IPG>, + <&clks IMX6SX_CLK_SAI1>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 31 23 0>, <&sdma 32 23 0>; + dma-source = <&gpr 0 15 0 16>; + status = "disabled"; + }; + + audmux: audmux@021d8000 { + compatible = "fsl,imx6sx-audmux", "fsl,imx31-audmux"; + reg = <0x021d8000 0x4000>; + status = "disabled"; + }; + + sai2: sai@021dc000 { + compatible = "fsl,imx6sx-sai"; + reg = <0x021dc000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_SAI2_IPG>, + <&clks IMX6SX_CLK_SAI2>, + <&clks 0>, <&clks 0>; + clock-names = "bus", "mclk1", "mclk2", "mclk3"; + dma-names = "rx", "tx"; + dmas = <&sdma 33 23 0>, <&sdma 34 23 0>; + dma-source = <&gpr 0 17 0 18>; + status = "disabled"; + }; + + qspi1: qspi@021e0000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-qspi"; + reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = ; + clocks = <&clks IMX6SX_CLK_QSPI1>, + <&clks IMX6SX_CLK_QSPI1>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + qspi2: qspi@021e4000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-qspi"; + reg = <0x021e4000 0x4000>, <0x70000000 0x10000000>; + reg-names = "QuadSPI", "QuadSPI-memory"; + interrupts = ; + clocks = <&clks IMX6SX_CLK_QSPI2>, + <&clks IMX6SX_CLK_QSPI2>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + uart2: serial@021e8000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x021e8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 27 4 0>, <&sdma 28 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart3: serial@021ec000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x021ec000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 29 4 0>, <&sdma 30 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart4: serial@021f0000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x021f0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 31 4 0>, <&sdma 32 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + uart5: serial@021f4000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x021f4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 33 4 0>, <&sdma 34 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c4: i2c@021f8000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-i2c", "fsl,imx21-i2c"; + reg = <0x021f8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_I2C4>; + status = "disabled"; + }; + }; + + aips3: aips-bus@02200000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02200000 0x100000>; + ranges; + + spba-bus@02200000 { + compatible = "fsl,spba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x02240000 0x40000>; + ranges; + + csi1: csi@02214000 { + reg = <0x02214000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, + <&clks IMX6SX_CLK_CSI>, + <&clks IMX6SX_CLK_DCIC1>; + clock-names = "disp-axi", "csi_mclk", "dcic"; + status = "disabled"; + }; + + pxp: pxp@02218000 { + reg = <0x02218000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PXP_AXI>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pxp-axi", "disp-axi"; + status = "disabled"; + }; + + csi2: csi@0221c000 { + reg = <0x0221c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_DISPLAY_AXI>, + <&clks IMX6SX_CLK_CSI>, + <&clks IMX6SX_CLK_DCIC2>; + clock-names = "disp-axi", "csi_mclk", "dcic"; + status = "disabled"; + }; + + lcdif1: lcdif@02220000 { + reg = <0x02220000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + lcdif2: lcdif@02224000 { + reg = <0x02224000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_LCDIF2_PIX>, + <&clks IMX6SX_CLK_LCDIF_APB>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pix", "axi", "disp_axi"; + status = "disabled"; + }; + + vadc: vadc@02228000 { + reg = <0x02228000 0x4000>, <0x0222c000 0x4000>; + reg-names = "vadc-vafe", "vadc-vdec"; + clocks = <&clks IMX6SX_CLK_VADC>, + <&clks IMX6SX_CLK_CSI>; + clock-names = "vadc", "csi"; + status = "disabled"; + }; + }; + + adc1: adc@02280000 { + compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; + reg = <0x02280000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_IPG>; + clock-names = "adc"; + status = "disabled"; + }; + + adc2: adc@02284000 { + compatible = "fsl,imx6sx-adc", "fsl,vf610-adc"; + reg = <0x02284000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_IPG>; + clock-names = "adc"; + status = "disabled"; + }; + + wdog3: wdog@02288000 { + compatible = "fsl,imx6sx-wdt", "fsl,imx21-wdt"; + reg = <0x02288000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_DUMMY>; + status = "disabled"; + }; + + ecspi5: ecspi@0228c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,imx6sx-ecspi", "fsl,imx51-ecspi"; + reg = <0x0228c000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_ECSPI5>, + <&clks IMX6SX_CLK_ECSPI5>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart6: serial@022a0000 { + compatible = "fsl,imx6sx-uart", "fsl,imx21-uart"; + reg = <0x022a0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_UART_IPG>, + <&clks IMX6SX_CLK_UART_SERIAL>; + clock-names = "ipg", "per"; + dmas = <&sdma 0 4 0>, <&sdma 47 4 0>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + pwm5: pwm@022a4000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x022a4000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM5>, + <&clks IMX6SX_CLK_PWM5>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm6: pwm@022a8000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x022a8000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM6>, + <&clks IMX6SX_CLK_PWM6>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm7: pwm@022ac000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x022ac000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM7>, + <&clks IMX6SX_CLK_PWM7>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + + pwm8: pwm@0022b0000 { + compatible = "fsl,imx6sx-pwm", "fsl,imx27-pwm"; + reg = <0x0022b0000 0x4000>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PWM8>, + <&clks IMX6SX_CLK_PWM8>; + clock-names = "ipg", "per"; + #pwm-cells = <2>; + }; + }; + + pcie: pcie@0x08000000 { + compatible = "fsl,imx6sx-pcie", "snps,dw-pcie"; + reg = <0x08ffc000 0x4000>; /* DBI */ + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + /* configuration space */ + ranges = <0x00000800 0 0x08f00000 0x08f00000 0 0x00080000 + /* downstream I/O */ + 0x81000000 0 0 0x08f80000 0 0x00010000 + /* non-prefetchable memory */ + 0x82000000 0 0x08000000 0x08000000 0 0x00f00000>; + num-lanes = <1>; + interrupts = ; + clocks = <&clks IMX6SX_CLK_PCIE_REF_125M>, + <&clks IMX6SX_CLK_PCIE_AXI>, + <&clks IMX6SX_CLK_LVDS1_OUT>, + <&clks IMX6SX_CLK_DISPLAY_AXI>; + clock-names = "pcie_ref_125m", "pcie_axi", + "lvds_gate", "display_axi"; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts index b10e6351da53f229a93488b34b832ea928531875..cf06e32ee108a221c330c8ff521e0a82d8b78e4d 100644 --- a/arch/arm/boot/dts/integratorap.dts +++ b/arch/arm/boot/dts/integratorap.dts @@ -8,6 +8,7 @@ / { model = "ARM Integrator/AP"; compatible = "arm,integrator-ap"; + dma-ranges = <0x80000000 0x0 0x80000000>; aliases { arm,timer-primary = &timer2; diff --git a/arch/arm/boot/dts/k2e-clocks.dtsi b/arch/arm/boot/dts/k2e-clocks.dtsi index 90774d604bc13f8fc04977112f7c1bc5ff6a676f..598afe91c6763b368f2dd53f807a12e780b1a41e 100644 --- a/arch/arm/boot/dts/k2e-clocks.dtsi +++ b/arch/arm/boot/dts/k2e-clocks.dtsi @@ -22,7 +22,7 @@ papllclk: papllclk@2620358 { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; clocks = <&refclkpass>; - clock-output-names = "pa-pll-clk"; + clock-output-names = "papllclk"; reg = <0x02620358 4>; reg-names = "control"; }; diff --git a/arch/arm/boot/dts/k2hk-clocks.dtsi b/arch/arm/boot/dts/k2hk-clocks.dtsi index 96e65365afe302c10b63ef08157e9cee590645ba..d5adee3c006758076c4c6a8f693022893b29f4da 100644 --- a/arch/arm/boot/dts/k2hk-clocks.dtsi +++ b/arch/arm/boot/dts/k2hk-clocks.dtsi @@ -31,7 +31,7 @@ papllclk: papllclk@2620358 { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; clocks = <&refclkpass>; - clock-output-names = "pa-pll-clk"; + clock-output-names = "papllclk"; reg = <0x02620358 4>; reg-names = "control"; }; diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts index 1f90cbf27fd7f73e9cff64ece88f1136b8071fbd..3223cc152a85be670c14f14d8879ac5092837489 100644 --- a/arch/arm/boot/dts/k2hk-evm.dts +++ b/arch/arm/boot/dts/k2hk-evm.dts @@ -167,3 +167,15 @@ partition@1 { }; }; }; + +&mdio { + ethphy0: ethernet-phy@0 { + compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; + reg = <0>; + }; + + ethphy1: ethernet-phy@1 { + compatible = "marvell,88E1111", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; diff --git a/arch/arm/boot/dts/k2l-clocks.dtsi b/arch/arm/boot/dts/k2l-clocks.dtsi index f584b80200f86f627d47b632a57886a9df2ae903..eb1e3e29f073856d76a1e47130bdd3639726d648 100644 --- a/arch/arm/boot/dts/k2l-clocks.dtsi +++ b/arch/arm/boot/dts/k2l-clocks.dtsi @@ -31,7 +31,7 @@ papllclk: papllclk@2620358 { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; clocks = <&refclksys>; - clock-output-names = "pa-pll-clk"; + clock-output-names = "papllclk"; reg = <0x02620358 4>; reg-names = "control"; }; diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi index 93f82c7010ab384fcf5ed5afa98e2acaa379bfac..0c334b25781e7466bc321bc3aaa0d7c0c906b510 100644 --- a/arch/arm/boot/dts/keystone-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-clocks.dtsi @@ -215,7 +215,7 @@ clktetbtrc: clktetbtrc { clkpa: clkpa { #clock-cells = <0>; compatible = "ti,keystone,psc-clock"; - clocks = <&chipclk16>; + clocks = <&paclk13>; clock-output-names = "pa"; reg = <0x0235001c 0xb00>, <0x02350008 0x400>; reg-names = "control", "domain"; diff --git a/arch/arm/boot/dts/keystone.dtsi b/arch/arm/boot/dts/keystone.dtsi index c1414cb81fd4ac8e2a58a513e5e0b5fe08a6aeb9..9e31fe7d31f8ed4401c0069074e83b1dd75f1e1b 100644 --- a/arch/arm/boot/dts/keystone.dtsi +++ b/arch/arm/boot/dts/keystone.dtsi @@ -266,5 +266,16 @@ aemif: aemif@21000A00 { ranges = <0 0 0x30000000 0x10000000 1 0 0x21000A00 0x00000100>; }; + + mdio: mdio@02090300 { + compatible = "ti,keystone_mdio", "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02090300 0x100>; + status = "disabled"; + clocks = <&clkpa>; + clock-names = "fck"; + bus_freq = <2500000>; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-d2net.dts b/arch/arm/boot/dts/kirkwood-d2net.dts new file mode 100644 index 0000000000000000000000000000000000000000..6b7856025001b376d575d133ace4e040a59ebddc --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-d2net.dts @@ -0,0 +1,42 @@ +/* + * Device Tree file for d2 Network v2 + * + * Copyright (C) 2014 Simon Guinot + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +/dts-v1/; + +#include "kirkwood-netxbig.dtsi" + +/ { + model = "LaCie d2 Network v2"; + compatible = "lacie,d2net_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + ns2-leds { + compatible = "lacie,ns2-leds"; + + blue-sata { + label = "d2net_v2:blue:sata"; + slow-gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; + cmd-gpio = <&gpio0 30 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-fail { + label = "d2net_v2:red:fail"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts new file mode 100644 index 0000000000000000000000000000000000000000..53dc37a3b6875dd10fcbe9babee959de4f5a95bd --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-net2big.dts @@ -0,0 +1,60 @@ +/* + * Device Tree file for LaCie 2Big Network v2 + * + * Copyright (C) 2014 + * + * Andrew Lunn + * + * Based on netxbig_v2-setup.c, + * Copyright (C) 2010 Simon Guinot + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-netxbig.dtsi" + +/ { + model = "LaCie 2Big Network v2"; + compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; +}; + +®ulators { + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "hdd1power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + }; + + clocks { + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&i2c0 { + g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts new file mode 100644 index 0000000000000000000000000000000000000000..36155b749d9fcbbf2bb579e0af5cccd066234867 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-net5big.dts @@ -0,0 +1,111 @@ +/* + * Device Tree file for LaCie 5Big Network v2 + * + * Copyright (C) 2014 + * + * Andrew Lunn + * + * Based on netxbig_v2-setup.c, + * Copyright (C) 2010 Simon Guinot + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-netxbig.dtsi" + +/ { + model = "LaCie 5Big Network v2"; + compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + +}; + +®ulators { + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "hdd1power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + }; + + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "hdd2power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "hdd3power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + + regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "hdd4power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; + + clocks { + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; +}; + +&mdio { + ethphy1: ethernet-phy@1 { + reg = <0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; + + +&i2c0 { + g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..b0cfb7cd30b9653155f29fb9c279308e698d1a35 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi @@ -0,0 +1,154 @@ +/* + * Device Tree common file for LaCie 2Big and 5Big Network v2 + * + * Copyright (C) 2014 + * + * Andrew Lunn + * + * Based on netxbig_v2-setup.c, + * Copyright (C) 2010 Simon Guinot + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + serial@12000 { + status = "okay"; + }; + + spi@10600 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l4005a"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + /* + * button@1 and button@2 represent a three position rocker + * switch. Thus the conventional KEY_POWER does not fit + */ + button@1 { + label = "Back power switch (on|auto)"; + linux,code = ; + linux,input-type = <5>; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + button@2 { + label = "Back power switch (auto|off)"; + linux,code = ; + linux,input-type = <5>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + button@3 { + label = "Function button"; + linux,code = ; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + + regulators: regulators { + status = "okay"; + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "hdd0power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <8>; + }; + + ethphy1: ethernet-phy@1 { + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + + pmx_button_function: pmx-button-function { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_button_power_off: pmx-button-power-off { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + pmx_button_power_on: pmx-button-power-on { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; +}; diff --git a/arch/arm/boot/dts/kizbox.dts b/arch/arm/boot/dts/kizbox.dts index 928f6eef2d592cc6b0fe0318c275cd3c98e75583..e83e4f9310b87346c617010276ec0e75c5279322 100644 --- a/arch/arm/boot/dts/kizbox.dts +++ b/arch/arm/boot/dts/kizbox.dts @@ -30,6 +30,10 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; + + main_xtal { + clock-frequency = <18432000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/mpa1600.dts b/arch/arm/boot/dts/mpa1600.dts index ccf9ea242f72977f56f15cc658d555c063b85150..f0f5e10989282e6c49d5e5fefd5b3082bc26e0f8 100644 --- a/arch/arm/boot/dts/mpa1600.dts +++ b/arch/arm/boot/dts/mpa1600.dts @@ -25,6 +25,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <18432000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <18432000>; + }; }; ahb { diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/boot/dts/mt6589-aquaris5.dts similarity index 53% rename from arch/arm/mach-s5pv210/include/mach/dma.h rename to arch/arm/boot/dts/mt6589-aquaris5.dts index 201842a3769e5187067d95b70c9d2e14a5ea3acd..443b4467de157c4f4ae5cc5acf6c260fa70a5d1d 100644 --- a/arch/arm/mach-s5pv210/include/mach/dma.h +++ b/arch/arm/boot/dts/mt6589-aquaris5.dts @@ -1,6 +1,6 @@ /* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh + * Copyright (c) 2014 MundoReader S.L. + * Author: Matthias Brugger * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -11,16 +11,15 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __MACH_DMA_H -#define __MACH_DMA_H +/dts-v1/; +#include "mt6589.dtsi" -/* This platform uses the common DMA API driver for PL330 */ -#include +/ { + model = "bq Aquaris5"; -#endif /* __MACH_DMA_H */ + memory { + reg = <0x80000000 0x40000000>; + }; +}; diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..d0297a05154953f23d47e5d6650305f2e1ebc46e --- /dev/null +++ b/arch/arm/boot/dts/mt6589.dtsi @@ -0,0 +1,94 @@ +/* + * Copyright (c) 2014 MundoReader S.L. + * Author: Matthias Brugger + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include "skeleton.dtsi" + +/ { + compatible = "mediatek,mt6589"; + interrupt-parent = <&gic>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x0>; + }; + cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x1>; + }; + cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x2>; + }; + cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x3>; + }; + + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + system_clk: dummy13m { + compatible = "fixed-clock"; + clock-frequency = <13000000>; + #clock-cells = <0>; + }; + + rtc_clk: dummy32k { + compatible = "fixed-clock"; + clock-frequency = <32000>; + #clock-cells = <0>; + }; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + timer: timer@10008000 { + compatible = "mediatek,mt6577-timer"; + reg = <0x10008000 0x80>; + interrupts = ; + clocks = <&system_clk>, <&rtc_clk>; + clock-names = "system-clk", "rtc-clk"; + }; + + gic: interrupt-controller@10212000 { + compatible = "arm,cortex-a15-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x10211000 0x1000>, + <0x10212000 0x1000>, + <0x10214000 0x2000>, + <0x10216000 0x2000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap2420.dtsi b/arch/arm/boot/dts/omap2420.dtsi index e83b0468080cb7c918e307166b38a57ab576f35a..9be3c126637854cf1cc1b06ea7343eabc4f28d6e 100644 --- a/arch/arm/boot/dts/omap2420.dtsi +++ b/arch/arm/boot/dts/omap2420.dtsi @@ -157,6 +157,8 @@ mailbox: mailbox@48094000 { interrupts = <26>, <34>; interrupt-names = "dsp", "iva"; ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <6>; }; timer1: timer@48028000 { @@ -182,3 +184,6 @@ &i2c1 { &i2c2 { compatible = "ti,omap2420-i2c"; }; + +/include/ "omap24xx-clocks.dtsi" +/include/ "omap2420-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi index c4e8013801ee031b78c13657b660304da4a5c54f..1a00f15d90963e8a5c2f4304eaa369b86e99891b 100644 --- a/arch/arm/boot/dts/omap2430.dtsi +++ b/arch/arm/boot/dts/omap2430.dtsi @@ -247,6 +247,8 @@ mailbox: mailbox@48094000 { reg = <0x48094000 0x200>; interrupts = <26>; ti,hwmods = "mailbox"; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <6>; }; timer1: timer@49018000 { @@ -288,3 +290,6 @@ &i2c1 { &i2c2 { compatible = "ti,omap2430-i2c"; }; + +/include/ "omap24xx-clocks.dtsi" +/include/ "omap2430-clocks.dtsi" diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index b2891a9a69751a3a359b768104fcfc6fa538d46c..575a49bf968d8c4be70abafa0009d1a7c3563661 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -332,6 +332,8 @@ mailbox: mailbox@48094000 { ti,hwmods = "mailbox"; reg = <0x48094000 0x200>; interrupts = <26>; + ti,mbox-num-users = <2>; + ti,mbox-num-fifos = <2>; }; mcspi1: spi@48098000 { diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi index 7e26d222bfe30903ed2cacd1f867b753137faf57..69408b53200d5aa88a603962452190ea43e02858 100644 --- a/arch/arm/boot/dts/omap4.dtsi +++ b/arch/arm/boot/dts/omap4.dtsi @@ -649,6 +649,15 @@ usb2_phy: usb2phy@4a0ad080 { }; }; + mailbox: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + interrupts = ; + ti,hwmods = "mailbox"; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + }; + timer1: timer@4a318000 { compatible = "ti,omap3430-timer"; reg = <0x4a318000 0x80>; diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index 1e1b05768cec6be180957d2d38ea80a1e0ebb43d..159720d6c9569aa6b13c65ee3674ca64d335a21e 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -100,15 +100,33 @@ hdmi_connector_in: endpoint { }; }; }; + + sound: sound { + compatible = "ti,abe-twl6040"; + ti,model = "omap5-uevm"; + + ti,mclk-freq = <19200000>; + + ti,mcpdm = <&mcpdm>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "AFML", "Line In", + "AFMR", "Line In"; + }; }; &omap5_pmx_core { pinctrl-names = "default"; pinctrl-0 = < - &twl6040_pins - &mcpdm_pins - &mcbsp1_pins - &mcbsp2_pins &usbhost_pins &led_gpio_pins >; @@ -306,6 +324,11 @@ extcon_usb3: palmas_usb { ti,wakeup; }; + clk32kgaudio: palmas_clk32k@1 { + compatible = "ti,palmas-clk32kgaudio"; + #clock-cells = <0>; + }; + palmas_pmic { compatible = "ti,palmas-pmic"; interrupt-parent = <&palmas>; @@ -489,6 +512,25 @@ regen3_reg: regen3 { }; }; }; + + twl6040: twl@4b { + compatible = "ti,twl6040"; + reg = <0x4b>; + + pinctrl-names = "default"; + pinctrl-0 = <&twl6040_pins>; + + interrupts = ; /* IRQ_SYS_2N cascaded to gic */ + interrupt-parent = <&gic>; + ti,audpwron-gpio = <&gpio5 13 0>; /* gpio line 141 */ + + vio-supply = <&smps7_reg>; + v2v1-supply = <&smps9_reg>; + enable-active-high; + + clocks = <&clk32kgaudio>; + clock-names = "clk32k"; + }; }; &i2c5 { @@ -505,8 +547,22 @@ gpio9: gpio@22 { }; }; -&mcbsp3 { - status = "disabled"; +&mcpdm { + pinctrl-names = "default"; + pinctrl-0 = <&mcpdm_pins>; + status = "okay"; +}; + +&mcbsp1 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp1_pins>; + status = "okay"; +}; + +&mcbsp2 { + pinctrl-names = "default"; + pinctrl-0 = <&mcbsp2_pins>; + status = "okay"; }; &usbhshost { diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index a4ed549888660c811d843779b388151dff0c2058..fc8df1739f393657e9040e67e486e08a47e04648 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -640,6 +640,8 @@ mailbox: mailbox@4a0f4000 { reg = <0x4a0f4000 0x200>; interrupts = ; ti,hwmods = "mailbox"; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; }; timer1: timer@4ae18000 { @@ -985,6 +987,66 @@ hdmi: encoder@58060000 { dma-names = "audio_tx"; }; }; + + abb_mpu: regulator-abb-mpu { + compatible = "ti,abb-v2"; + regulator-name = "abb_mpu"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>, + <0x4a0021c4 0x8>, <0x4ae0c318 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x80>; + /* LDOVBBMPU_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMPU_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1060000 0 0x0 0 0x02000000 0x01F00000 + 1250000 0 0x4 0 0x02000000 0x01F00000 + >; + }; + + abb_mm: regulator-abb-mm { + compatible = "ti,abb-v2"; + regulator-name = "abb_mm"; + #address-cells = <0>; + #size-cells = <0>; + clocks = <&sys_clkin>; + ti,settling-time = <50>; + ti,clock-cycles = <16>; + + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>, + <0x4a0021a4 0x8>, <0x4ae0c314 0x4>; + reg-names = "base-address", "int-address", + "efuse-address", "ldo-address"; + ti,tranxdone-status-mask = <0x80000000>; + /* LDOVBBMM_MUX_CTRL */ + ti,ldovbb-override-mask = <0x400>; + /* LDOVBBMM_VSET_OUT */ + ti,ldovbb-vset-mask = <0x1F>; + + /* + * NOTE: only FBB mode used but actual vset will + * determine final biasing + */ + ti,abb_info = < + /*uV ABB efuse rbb_m fbb_m vset_m*/ + 1025000 0 0x0 0 0x02000000 0x01F00000 + 1120000 0 0x4 0 0x02000000 0x01F00000 + >; + }; }; }; diff --git a/arch/arm/boot/dts/pm9g45.dts b/arch/arm/boot/dts/pm9g45.dts index 33ffabe9c4c86e293d9d00c63977e411cffb729b..66afcff67fde75965fc9c86b0a0e38b2bd84a0a6 100644 --- a/arch/arm/boot/dts/pm9g45.dts +++ b/arch/arm/boot/dts/pm9g45.dts @@ -29,6 +29,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index 56849b55e1c22e162e11851d29497b57571a623a..20705467f4c9a0e63f85cdc465aeaf151e3592d0 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -57,3 +57,13 @@ eeprom@50 { &scif2 { status = "okay"; }; + +&spi4 { + status = "okay"; + + codec: codec@0 { + compatible = "wlf,wm8978"; + reg = <0>; + spi-max-frequency = <5000000>; + }; +}; diff --git a/arch/arm/boot/dts/r7s72100.dtsi b/arch/arm/boot/dts/r7s72100.dtsi index f50fbc8f3bd9584a5d8a74fb9fb55c4bfe01225b..bdee225411895f75b7e8477527496ff696074cf3 100644 --- a/arch/arm/boot/dts/r7s72100.dtsi +++ b/arch/arm/boot/dts/r7s72100.dtsi @@ -144,6 +144,7 @@ cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clock-frequency = <400000000>; }; }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts index 70b1fff8f4a3592a69bf889455504fa1d553adde..a860f32bca27fd8d089bb93f202b9b196dbcf6ac 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts @@ -16,6 +16,10 @@ / { model = "APE6EVM"; compatible = "renesas,ape6evm-reference", "renesas,r8a73a4"; + aliases { + serial0 = &scifa0; + }; + chosen { bootargs = "console=ttySC0,115200 ignore_loglevel rw"; }; @@ -90,9 +94,6 @@ &cpu0 { }; &pfc { - pinctrl-0 = <&scifa0_pins>; - pinctrl-names = "default"; - scifa0_pins: serial0 { renesas,groups = "scifa0_data"; renesas,function = "scifa0"; @@ -123,6 +124,13 @@ &mmcif0 { status = "okay"; }; +&scifa0 { + pinctrl-0 = <&scifa0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &sdhi0 { vmmc-supply = <&vcc_sdhi0>; bus-width = <4>; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 82c5ac825386e4d5720d738cab456c2eba3078be..d8ec5058c3519a42c446d0dd8f69d7da11a40718 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -252,6 +252,48 @@ i2c8: i2c@e6570000 { status = "disabled"; }; + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; + reg = <0 0xe6c40000 0 0x100>; + interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a73a4", "renesas,scifa"; + reg = <0 0xe6c50000 0 0x100>; + interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifb2: serial@e6c20000 { + compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; + reg = <0 0xe6c20000 0 0x100>; + interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifb3: serial@e6c30000 { + compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; + reg = <0 0xe6c30000 0 0x100>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifb4: serial@e6ce0000 { + compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; + reg = <0 0xe6ce0000 0 0x100>; + interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifb5: serial@e6cf0000 { + compatible = "renesas,scifb-r8a73a4", "renesas,scifb"; + reg = <0 0xe6cf0000 0 0x100>; + interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + mmcif0: mmc@ee200000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts index 486007d7ffe4ee2463560655819146e84708416d..ee9e7d5c97a9a96c2ec8b67c347c00712ae0e1db 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts @@ -19,8 +19,12 @@ / { model = "armadillo 800 eva reference"; compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740"; + aliases { + serial1 = &scifa1; + }; + chosen { - bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; + bootargs = "console=tty0 console=ttySC1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; }; memory { @@ -104,17 +108,21 @@ home-key { leds { compatible = "gpio-leds"; - led1 { + led3 { gpios = <&pfc 102 GPIO_ACTIVE_HIGH>; + label = "LED3"; }; - led2 { + led4 { gpios = <&pfc 111 GPIO_ACTIVE_HIGH>; + label = "LED4"; }; - led3 { + led5 { gpios = <&pfc 110 GPIO_ACTIVE_HIGH>; + label = "LED5"; }; - led4 { + led6 { gpios = <&pfc 177 GPIO_ACTIVE_HIGH>; + label = "LED6"; }; }; @@ -198,9 +206,6 @@ rtc@30 { }; &pfc { - pinctrl-0 = <&scifa1_pins>; - pinctrl-names = "default"; - ether_pins: ether { renesas,groups = "gether_mii", "gether_int"; renesas,function = "gether"; @@ -252,6 +257,13 @@ &mmcif0 { status = "okay"; }; +&scifa1 { + pinctrl-0 = <&scifa1_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index 55d29f4d2ed6829b2c1de815dd11a2125945c29c..bda18fb3d9e5cad7fa61bb5419eea0db07a59785 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -156,6 +156,69 @@ i2c1: i2c@e6c20000 { status = "disabled"; }; + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6c40000 0x100>; + interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6c50000 0x100>; + interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6c60000 0x100>; + interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6c70000 0x100>; + interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa4: serial@e6c80000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6c80000 0x100>; + interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa5: serial@e6cb0000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6cb0000 0x100>; + interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa6: serial@e6cc0000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6cc0000 0x100>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa7: serial@e6cd0000 { + compatible = "renesas,scifa-r8a7740", "renesas,scifa"; + reg = <0xe6cd0000 0x100>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifb8: serial@e6c30000 { + compatible = "renesas,scifb-r8a7740", "renesas,scifb"; + reg = <0xe6c30000 0x100>; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + pfc: pfc@e6050000 { compatible = "renesas,pfc-r8a7740"; reg = <0xe6050000 0x8000>, diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts index f76f6ec01e194c669ef0bcc055e78b20d602086a..3342c74c5de890b1aa845a8a32835bd1dd9fd7a9 100644 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts @@ -23,6 +23,10 @@ / { model = "bockw"; compatible = "renesas,bockw-reference", "renesas,r8a7778"; + aliases { + serial0 = &scif0; + }; + chosen { bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw"; }; @@ -70,9 +74,6 @@ &irqpin { }; &pfc { - pinctrl-0 = <&scif0_pins>; - pinctrl-names = "default"; - scif0_pins: serial0 { renesas,groups = "scif0_data_a", "scif0_ctrl"; renesas,function = "scif0"; @@ -124,3 +125,10 @@ partition@0 { }; }; }; + +&scif0 { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index 3af0a2187493101f142a2739bbec15172b0449b9..ecfdf4b01b5a6efd93da66181688be009ae7f808 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -156,6 +156,48 @@ i2c3: i2c@ffc73000 { status = "disabled"; }; + scif0: serial@ffe40000 { + compatible = "renesas,scif-r8a7778", "renesas,scif"; + reg = <0xffe40000 0x100>; + interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scif1: serial@ffe41000 { + compatible = "renesas,scif-r8a7778", "renesas,scif"; + reg = <0xffe41000 0x100>; + interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scif2: serial@ffe42000 { + compatible = "renesas,scif-r8a7778", "renesas,scif"; + reg = <0xffe42000 0x100>; + interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scif3: serial@ffe43000 { + compatible = "renesas,scif-r8a7778", "renesas,scif"; + reg = <0xffe43000 0x100>; + interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scif4: serial@ffe44000 { + compatible = "renesas,scif-r8a7778", "renesas,scif"; + reg = <0xffe44000 0x100>; + interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scif5: serial@ffe45000 { + compatible = "renesas,scif-r8a7778", "renesas,scif"; + reg = <0xffe45000 0x100>; + interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + mmcif: mmc@ffe4e000 { compatible = "renesas,sh-mmcif"; reg = <0xffe4e000 0x100>; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts deleted file mode 100644 index b27c6373ff4d028b69c310f882d986ec57f8baf6..0000000000000000000000000000000000000000 --- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts +++ /dev/null @@ -1,121 +0,0 @@ -/* - * Reference Device Tree Source for the Marzen board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * Copyright (C) 2013 Simon Horman - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -#include "r8a7779.dtsi" -#include -#include - -/ { - model = "marzen"; - compatible = "renesas,marzen-reference", "renesas,r8a7779"; - - chosen { - bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on rw"; - }; - - memory { - device_type = "memory"; - reg = <0x60000000 0x40000000>; - }; - - fixedregulator3v3: fixedregulator@0 { - compatible = "regulator-fixed"; - regulator-name = "fixed-3.3V"; - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - regulator-always-on; - }; - - lan0@18000000 { - compatible = "smsc,lan9220", "smsc,lan9115"; - reg = <0x18000000 0x100>; - pinctrl-0 = <&lan0_pins>; - pinctrl-names = "default"; - - phy-mode = "mii"; - interrupt-parent = <&irqpin0>; - interrupts = <1 IRQ_TYPE_EDGE_FALLING>; - smsc,irq-push-pull; - reg-io-width = <4>; - vddvario-supply = <&fixedregulator3v3>; - vdd33a-supply = <&fixedregulator3v3>; - }; - - leds { - compatible = "gpio-leds"; - led2 { - gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; - }; - led3 { - gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; - }; - led4 { - gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; - }; - }; -}; - -&irqpin0 { - status = "okay"; -}; - -&pfc { - pinctrl-0 = <&scif2_pins &scif4_pins>; - pinctrl-names = "default"; - - lan0_pins: lan0 { - intc { - renesas,groups = "intc_irq1_b"; - renesas,function = "intc"; - }; - lbsc { - renesas,groups = "lbsc_ex_cs0"; - renesas,function = "lbsc"; - }; - }; - - scif2_pins: serial2 { - renesas,groups = "scif2_data_c"; - renesas,function = "scif2"; - }; - - scif4_pins: serial4 { - renesas,groups = "scif4_data"; - renesas,function = "scif4"; - }; - - sdhi0_pins: sd0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; - renesas,function = "sdhi0"; - }; - - hspi0_pins: hspi0 { - renesas,groups = "hspi0"; - renesas,function = "hspi0"; - }; -}; - -&sdhi0 { - pinctrl-0 = <&sdhi0_pins>; - pinctrl-names = "default"; - - vmmc-supply = <&fixedregulator3v3>; - bus-width = <4>; - status = "okay"; -}; - -&hspi0 { - pinctrl-0 = <&hspi0_pins>; - pinctrl-names = "default"; - status = "okay"; -}; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index a7af2c2371f2581b6e9f8e1e43a064eef46bc60e..5745555df9433fb4573aebba1f8ec3578b6f45d1 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -11,17 +11,131 @@ /dts-v1/; #include "r8a7779.dtsi" +#include +#include / { model = "marzen"; compatible = "renesas,marzen", "renesas,r8a7779"; + aliases { + serial2 = &scif2; + serial4 = &scif4; + }; + chosen { - bootargs = "console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on"; + bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on"; }; memory { device_type = "memory"; reg = <0x60000000 0x40000000>; }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + lan0@18000000 { + compatible = "smsc,lan9220", "smsc,lan9115"; + reg = <0x18000000 0x100>; + pinctrl-0 = <&lan0_pins>; + pinctrl-names = "default"; + + phy-mode = "mii"; + interrupt-parent = <&irqpin0>; + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; + reg-io-width = <4>; + vddvario-supply = <&fixedregulator3v3>; + vdd33a-supply = <&fixedregulator3v3>; + }; + + leds { + compatible = "gpio-leds"; + led2 { + gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>; + }; + led3 { + gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; + }; + led4 { + gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&irqpin0 { + status = "okay"; +}; + +&extal_clk { + clock-frequency = <31250000>; +}; + +&pfc { + lan0_pins: lan0 { + intc { + renesas,groups = "intc_irq1_b"; + renesas,function = "intc"; + }; + lbsc { + renesas,groups = "lbsc_ex_cs0"; + renesas,function = "lbsc"; + }; + }; + + scif2_pins: serial2 { + renesas,groups = "scif2_data_c"; + renesas,function = "scif2"; + }; + + scif4_pins: serial4 { + renesas,groups = "scif4_data"; + renesas,function = "scif4"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; + renesas,function = "sdhi0"; + }; + + hspi0_pins: hspi0 { + renesas,groups = "hspi0"; + renesas,function = "hspi0"; + }; +}; + +&scif2 { + pinctrl-0 = <&scif2_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&scif4 { + pinctrl-0 = <&scif4_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <4>; + status = "okay"; +}; + +&hspi0 { + pinctrl-0 = <&hspi0_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index b517c8e6b42094c5637a1aae27a4eec4a0f83b82..58d0d952d60e511b235fae39ab5afce807434592 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -11,6 +11,7 @@ /include/ "skeleton.dtsi" +#include #include / { @@ -25,21 +26,25 @@ cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; + clock-frequency = <1000000000>; }; cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; + clock-frequency = <1000000000>; }; cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; + clock-frequency = <1000000000>; }; cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; + clock-frequency = <1000000000>; }; }; @@ -49,13 +54,13 @@ aliases { spi2 = &hspi2; }; - gic: interrupt-controller@f0001000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0xf0001000 0x1000>, - <0xf0000100 0x100>; - }; + gic: interrupt-controller@f0001000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0xf0001000 0x1000>, + <0xf0000100 0x100>; + }; gpio0: gpio@ffc40000 { compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; @@ -157,6 +162,7 @@ i2c0: i2c@ffc70000 { compatible = "renesas,i2c-r8a7779"; reg = <0xffc70000 0x1000>; interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C0>; status = "disabled"; }; @@ -166,6 +172,7 @@ i2c1: i2c@ffc71000 { compatible = "renesas,i2c-r8a7779"; reg = <0xffc71000 0x1000>; interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C1>; status = "disabled"; }; @@ -175,6 +182,7 @@ i2c2: i2c@ffc72000 { compatible = "renesas,i2c-r8a7779"; reg = <0xffc72000 0x1000>; interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C2>; status = "disabled"; }; @@ -184,6 +192,67 @@ i2c3: i2c@ffc73000 { compatible = "renesas,i2c-r8a7779"; reg = <0xffc73000 0x1000>; interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp0_clks R8A7779_CLK_I2C3>; + status = "disabled"; + }; + + scif0: serial@ffe40000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe40000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif1: serial@ffe41000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe41000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 89 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif2: serial@ffe42000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe42000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif3: serial@ffe43000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe43000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif4: serial@ffe44000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe44000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; + status = "disabled"; + }; + + scif5: serial@ffe45000 { + compatible = "renesas,scif-r8a7779", "renesas,scif"; + reg = <0xffe45000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg_clocks R8A7779_CLK_P>; + clock-names = "sci_ick"; status = "disabled"; }; @@ -201,12 +270,14 @@ sata: sata@fc600000 { compatible = "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp1_clks R8A7779_CLK_SATA>; }; sdhi0: sd@ffe4c000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4c000 0x100>; interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI0>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -216,6 +287,7 @@ sdhi1: sd@ffe4d000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4d000 0x100>; interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI1>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -225,6 +297,7 @@ sdhi2: sd@ffe4e000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4e000 0x100>; interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI2>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -234,6 +307,7 @@ sdhi3: sd@ffe4f000 { compatible = "renesas,sdhi-r8a7779"; reg = <0xffe4f000 0x100>; interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7779_CLK_SDHI3>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; @@ -245,6 +319,7 @@ hspi0: spi@fffc7000 { interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; status = "disabled"; }; @@ -254,6 +329,7 @@ hspi1: spi@fffc8000 { interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; status = "disabled"; }; @@ -263,6 +339,150 @@ hspi2: spi@fffc6000 { interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; #address-cells = <1>; #size-cells = <0>; + clocks = <&mstp0_clks R8A7779_CLK_HSPI>; status = "disabled"; }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* External root clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overriden by the board. */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: clocks@ffc80000 { + compatible = "renesas,r8a7779-cpg-clocks"; + reg = <0xffc80000 0x30>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "plla", "z", "zs", "s", + "s1", "p", "b", "out"; + }; + + /* Fixed factor clocks */ + i_clk: i_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "i"; + }; + s3_clk: s3_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "s3"; + }; + s4_clk: s4_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <16>; + clock-mult = <1>; + clock-output-names = "s4"; + }; + g_clk: g_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7779_CLK_PLLA>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "g"; + }; + + /* Gate clocks */ + mstp0_clks: clocks@ffc80030 { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc80030 4>; + clocks = <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_S1>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7779_CLK_HSPI R8A7779_CLK_TMU2 + R8A7779_CLK_TMU1 R8A7779_CLK_TMU0 + R8A7779_CLK_HSCIF1 R8A7779_CLK_HSCIF0 + R8A7779_CLK_SCIF5 R8A7779_CLK_SCIF4 + R8A7779_CLK_SCIF3 R8A7779_CLK_SCIF2 + R8A7779_CLK_SCIF1 R8A7779_CLK_SCIF0 + R8A7779_CLK_I2C3 R8A7779_CLK_I2C2 + R8A7779_CLK_I2C1 R8A7779_CLK_I2C0 + >; + clock-output-names = + "hspi", "tmu2", "tmu1", "tmu0", "hscif1", + "hscif0", "scif5", "scif4", "scif3", "scif2", + "scif1", "scif0", "i2c3", "i2c2", "i2c1", + "i2c0"; + }; + mstp1_clks: clocks@ffc80034 { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc80034 4>, <0xffc80044 4>; + clocks = <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_S>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_P>, + <&cpg_clocks R8A7779_CLK_S>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7779_CLK_USB01 R8A7779_CLK_USB2 + R8A7779_CLK_DU R8A7779_CLK_VIN2 + R8A7779_CLK_VIN1 R8A7779_CLK_VIN0 + R8A7779_CLK_ETHER R8A7779_CLK_SATA + R8A7779_CLK_PCIE R8A7779_CLK_VIN3 + >; + clock-output-names = + "usb01", "usb2", + "du", "vin2", + "vin1", "vin0", + "ether", "sata", + "pcie", "vin3"; + }; + mstp3_clks: clocks@ffc8003c { + compatible = "renesas,r8a7779-mstp-clocks", + "renesas,cpg-mstp-clocks"; + reg = <0xffc8003c 4>; + clocks = <&s4_clk>, <&s4_clk>, <&s4_clk>, <&s4_clk>, + <&s4_clk>, <&s4_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7779_CLK_SDHI3 R8A7779_CLK_SDHI2 + R8A7779_CLK_SDHI1 R8A7779_CLK_SDHI0 + R8A7779_CLK_MMC1 R8A7779_CLK_MMC0 + >; + clock-output-names = + "sdhi3", "sdhi2", "sdhi1", "sdhi0", + "mmc1", "mmc0"; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index dd2fe46073f2298ba68431625697e669c1ee5ddb..856b4236b67470a6a484116f71cad2ccf58ebb98 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -29,12 +29,12 @@ chosen { memory@40000000 { device_type = "memory"; - reg = <0 0x40000000 0 0x80000000>; + reg = <0 0x40000000 0 0x40000000>; }; memory@180000000 { device_type = "memory"; - reg = <1 0x80000000 0 0x80000000>; + reg = <1 0x40000000 0 0xc0000000>; }; lbsc { @@ -204,6 +204,36 @@ msiof1_pins: spi2 { "msiof1_tx"; renesas,function = "msiof1"; }; + + iic1_pins: iic1 { + renesas,groups = "iic1"; + renesas,function = "iic1"; + }; + + iic2_pins: iic2 { + renesas,groups = "iic2"; + renesas,function = "iic2"; + }; + + iic3_pins: iic3 { + renesas,groups = "iic3"; + renesas,function = "iic3"; + }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; + + usb2_pins: usb2 { + renesas,groups = "usb2"; + renesas,function = "usb2"; + }; }; ðer { @@ -317,3 +347,57 @@ &sdhi2 { cd-gpios = <&gpio3 22 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; + +&iic0 { + status = "ok"; +}; + +&iic1 { + status = "ok"; + pinctrl-0 = <&iic1_pins>; + pinctrl-names = "default"; +}; + +&iic2 { + status = "ok"; + pinctrl-0 = <&iic2_pins>; + pinctrl-names = "default"; +}; + +&iic3 { + pinctrl-names = "default"; + pinctrl-0 = <&iic3_pins>; + status = "okay"; + + vdd_dvfs: regulator@68 { + compatible = "diasemi,da9210"; + reg = <0x68>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&pci2 { + status = "okay"; + pinctrl-0 = <&usb2_pins>; + pinctrl-names = "default"; +}; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 7ff29601f962a01747ca02115d63497e04b48d73..d9ddecbb859c122e022204d60f5dc350694fd5ff 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -44,6 +44,17 @@ cpu0: cpu@0 { compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1300000000>; + voltage-tolerance = <1>; /* 1% */ + clocks = <&cpg_clocks R8A7790_CLK_Z>; + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1400000 1000000>, + <1225000 1000000>, + <1050000 1000000>, + < 875000 1000000>, + < 700000 1000000>, + < 350000 1000000>; }; cpu1: cpu@1 { @@ -476,6 +487,15 @@ extal_clk: extal_clk { clock-output-names = "extal"; }; + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "pcie_bus"; + status = "disabled"; + }; + /* * The external audio clocks are configured as 0 Hz fixed frequency clocks by * default. Boards that provide audio clocks should override them. @@ -754,17 +774,17 @@ mstp3_clks: mstp3_clks@e615013c { reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>, - <&hp_clk>, <&hp_clk>, <&rclk_clk>; + <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0 - R8A7790_CLK_IIC0 R8A7790_CLK_IIC1 R8A7790_CLK_CMT1 + R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1 >; clock-output-names = "iic2", "tpu0", "mmcif1", "sdhi3", "sdhi2", "sdhi1", "sdhi0", "mmcif0", - "iic0", "iic1", "cmt1"; + "iic0", "pciec", "iic1", "ssusb", "cmt1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -824,6 +844,39 @@ R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 R8A7790_CLK_I2C0 "rcan1", "rcan0", "qspi_mod", "iic3", "i2c3", "i2c2", "i2c1", "i2c0"; }; + mstp10_clks: mstp10_clks@e6150998 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; + clocks = <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>, + <&mstp10_clks R8A7790_CLK_SCU_ALL>, <&mstp10_clks R8A7790_CLK_SCU_ALL>; + + #clock-cells = <1>; + clock-indices = < + R8A7790_CLK_SSI_ALL + R8A7790_CLK_SSI9 R8A7790_CLK_SSI8 R8A7790_CLK_SSI7 R8A7790_CLK_SSI6 R8A7790_CLK_SSI5 + R8A7790_CLK_SSI4 R8A7790_CLK_SSI3 R8A7790_CLK_SSI2 R8A7790_CLK_SSI1 R8A7790_CLK_SSI0 + R8A7790_CLK_SCU_ALL + R8A7790_CLK_SCU_DVC1 R8A7790_CLK_SCU_DVC0 + R8A7790_CLK_SCU_SRC9 R8A7790_CLK_SCU_SRC8 R8A7790_CLK_SCU_SRC7 R8A7790_CLK_SCU_SRC6 R8A7790_CLK_SCU_SRC5 + R8A7790_CLK_SCU_SRC4 R8A7790_CLK_SCU_SRC3 R8A7790_CLK_SCU_SRC2 R8A7790_CLK_SCU_SRC1 R8A7790_CLK_SCU_SRC0 + >; + clock-output-names = + "ssi-all", + "ssi9", "ssi8", "ssi7", "ssi6", "ssi5", + "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", + "scu-all", + "scu-dvc1", "scu-dvc0", + "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", + "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; + }; }; qspi: spi@e6b10000 { @@ -876,4 +929,152 @@ msiof3: spi@e6c90000 { #size-cells = <0>; status = "disabled"; }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7790"; + device_type = "pci"; + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci1: pci@ee0b0000 { + compatible = "renesas,pci-r8a7790"; + device_type = "pci"; + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + reg = <0 0xee0b0000 0 0xc00>, + <0 0xee0a0000 0 0x1100>; + interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0a0000 0 0xee0a0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 112 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 112 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci2: pci@ee0d0000 { + compatible = "renesas,pci-r8a7790"; + device_type = "pci"; + clocks = <&mstp7_clks R8A7790_CLK_EHCI>; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <2 2>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + }; + + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a7790"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 + 0x43000000 1 0x80000000 1 0x80000000 0 0x80000000>; + interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>, + <0 117 IRQ_TYPE_LEVEL_HIGH>, + <0 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_PCIEC>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + status = "disabled"; + }; + + rcar_sound: rcar_sound@0xec500000 { + #sound-dai-cells = <1>; + compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; + interrupt-parent = <&gic>; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x1280>; /* SSI */ + clocks = <&mstp10_clks R8A7790_CLK_SSI_ALL>, + <&mstp10_clks R8A7790_CLK_SSI9>, <&mstp10_clks R8A7790_CLK_SSI8>, + <&mstp10_clks R8A7790_CLK_SSI7>, <&mstp10_clks R8A7790_CLK_SSI6>, + <&mstp10_clks R8A7790_CLK_SSI5>, <&mstp10_clks R8A7790_CLK_SSI4>, + <&mstp10_clks R8A7790_CLK_SSI3>, <&mstp10_clks R8A7790_CLK_SSI2>, + <&mstp10_clks R8A7790_CLK_SSI1>, <&mstp10_clks R8A7790_CLK_SSI0>, + <&mstp10_clks R8A7790_CLK_SCU_SRC9>, <&mstp10_clks R8A7790_CLK_SCU_SRC8>, + <&mstp10_clks R8A7790_CLK_SCU_SRC7>, <&mstp10_clks R8A7790_CLK_SCU_SRC6>, + <&mstp10_clks R8A7790_CLK_SCU_SRC5>, <&mstp10_clks R8A7790_CLK_SCU_SRC4>, + <&mstp10_clks R8A7790_CLK_SCU_SRC3>, <&mstp10_clks R8A7790_CLK_SCU_SRC2>, + <&mstp10_clks R8A7790_CLK_SCU_SRC1>, <&mstp10_clks R8A7790_CLK_SCU_SRC0>, + <&mstp10_clks R8A7790_CLK_SCU_DVC0>, <&mstp10_clks R8A7790_CLK_SCU_DVC1>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", "src.5", + "src.4", "src.3", "src.2", "src.1", "src.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc@0 { }; + dvc1: dvc@1 { }; + }; + + rcar_sound,src { + src0: src@0 { }; + src1: src@1 { }; + src2: src@2 { }; + src3: src@3 { }; + src4: src@4 { }; + src5: src@5 { }; + src6: src@6 { }; + src7: src@7 { }; + src8: src@8 { }; + src9: src@9 { }; + }; + + rcar_sound,ssi { + ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; }; + ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; }; + ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; }; + ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; }; + ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; }; + ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; }; + ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; }; + ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; }; + ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; }; + ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; }; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7791-henninger.dts b/arch/arm/boot/dts/r8a7791-henninger.dts index cc6d992e8db219e3502b2265f01d1d6a0620a608..3a2ef0a2a137f8d49754c28b2bb95ba9bb2fb225 100644 --- a/arch/arm/boot/dts/r8a7791-henninger.dts +++ b/arch/arm/boot/dts/r8a7791-henninger.dts @@ -110,6 +110,11 @@ sdhi2_pins: sd2 { renesas,function = "sdhi2"; }; + i2c2_pins: i2c2 { + renesas,groups = "i2c2"; + renesas,function = "i2c2"; + }; + qspi_pins: spi0 { renesas,groups = "qspi_ctrl", "qspi_data4"; renesas,function = "qspi"; @@ -120,6 +125,16 @@ msiof0_pins: spi1 { "msiof0_tx"; renesas,function = "msiof0"; }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; }; &scif0 { @@ -146,7 +161,7 @@ phy1: ethernet-phy@1 { }; &sata0 { - status = "okay"; + status = "okay"; }; &sdhi0 { @@ -170,6 +185,14 @@ &sdhi2 { status = "okay"; }; +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; +}; + &qspi { pinctrl-0 = <&qspi_pins>; pinctrl-names = "default"; @@ -217,3 +240,23 @@ pmic@0 { spi-cpha; }; }; + +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&pcie_bus_clk { + status = "okay"; +}; + +&pciec { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 05d44f9b202f5d5199c2f576298c76cd8774dfde..23486c081a69891096cd08c157d8dfc7fd94384b 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -215,25 +215,6 @@ &extal_clk { clock-frequency = <20000000>; }; -&i2c2 { - pinctrl-0 = <&i2c2_pins>; - pinctrl-names = "default"; - - status = "okay"; - clock-frequency = <400000>; - - eeprom@50 { - compatible = "renesas,24c02"; - reg = <0x50>; - pagesize = <16>; - }; -}; - -&i2c6 { - status = "okay"; - clock-frequency = <100000>; -}; - &pfc { pinctrl-0 = <&du_pins>; pinctrl-names = "default"; @@ -293,6 +274,21 @@ msiof0_pins: spi1 { "msiof0_tx"; renesas,function = "msiof0"; }; + + i2c6_pins: i2c6 { + renesas,groups = "i2c6"; + renesas,function = "i2c6"; + }; + + usb0_pins: usb0 { + renesas,groups = "usb0"; + renesas,function = "usb0"; + }; + + usb1_pins: usb1 { + renesas,groups = "usb1"; + renesas,function = "usb1"; + }; }; ðer { @@ -408,3 +404,58 @@ pmic: pmic@0 { spi-cpha; }; }; + +&i2c2 { + pinctrl-0 = <&i2c2_pins>; + pinctrl-names = "default"; + + status = "okay"; + clock-frequency = <400000>; + + eeprom@50 { + compatible = "renesas,24c02"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&i2c6 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_pins>; + status = "okay"; + clock-frequency = <100000>; + + vdd_dvfs: regulator@68 { + compatible = "diasemi,da9210"; + reg = <0x68>; + + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&pci0 { + status = "okay"; + pinctrl-0 = <&usb0_pins>; + pinctrl-names = "default"; +}; + +&pci1 { + status = "okay"; + pinctrl-0 = <&usb1_pins>; + pinctrl-names = "default"; +}; + +&pcie_bus_clk { + status = "okay"; +}; + +&pciec { + status = "okay"; +}; + +&cpu0 { + cpu0-supply = <&vdd_dvfs>; +}; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index 79f68acfd5d46c9dd9bced05190dbb9173c5500b..0d82a4b3c650cf197c107a88a7d962378cf94e16 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -45,6 +45,17 @@ cpu0: cpu@0 { compatible = "arm,cortex-a15"; reg = <0>; clock-frequency = <1500000000>; + voltage-tolerance = <1>; /* 1% */ + clocks = <&cpg_clocks R8A7791_CLK_Z>; + clock-latency = <300000>; /* 300 us */ + + /* kHz - uV - OPPs unknown yet */ + operating-points = <1500000 1000000>, + <1312500 1000000>, + <1125000 1000000>, + < 937500 1000000>, + < 750000 1000000>, + < 375000 1000000>; }; cpu1: cpu@1 { @@ -521,6 +532,38 @@ extal_clk: extal_clk { clock-output-names = "extal"; }; + /* + * The external audio clocks are configured as 0 Hz fixed frequency clocks by + * default. Boards that provide audio clocks should override them. + */ + audio_clk_a: audio_clk_a { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_a"; + }; + audio_clk_b: audio_clk_b { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_b"; + }; + audio_clk_c: audio_clk_c { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + clock-output-names = "audio_clk_c"; + }; + + /* External PCIe clock - can be overridden by the board */ + pcie_bus_clk: pcie_bus_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <100000000>; + clock-output-names = "pcie_bus"; + status = "disabled"; + }; + /* Special CPG clocks */ cpg_clocks: cpg_clocks@e6150000 { compatible = "renesas,r8a7791-cpg-clocks", @@ -743,30 +786,34 @@ mstp2_clks: mstp2_clks@e6150138 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, - <&mp_clk>, <&mp_clk>, <&mp_clk>; + <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&zs_clk>, <&zs_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0 R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1 R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2 + R8A7791_CLK_SYS_DMAC1 R8A7791_CLK_SYS_DMAC0 >; clock-output-names = "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", - "scifb1", "msiof1", "scifb2"; + "scifb1", "msiof1", "scifb2", + "sys-dmac1", "sys-dmac0"; }; mstp3_clks: mstp3_clks@e615013c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>, - <&mmc0_clk>, <&hp_clk>, <&hp_clk>, <&rclk_clk>; + <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>; #clock-cells = <1>; renesas,clock-indices = < R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0 - R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_IIC1 R8A7791_CLK_CMT1 + R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1 + R8A7791_CLK_SSUSB R8A7791_CLK_CMT1 >; clock-output-names = "tpu0", "sdhi2", "sdhi1", "sdhi0", - "mmcif0", "i2c7", "i2c8", "cmt1"; + "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1"; }; mstp5_clks: mstp5_clks@e6150144 { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; @@ -828,6 +875,39 @@ R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c6", "i2c4", "i2c3", "i2c2", "i2c1", "i2c0"; }; + mstp10_clks: mstp10_clks@e6150998 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150998 0 4>, <0 0xe61509a8 0 4>; + clocks = <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>, + <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, + <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, + <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, + <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, + <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>, + <&mstp10_clks R8A7791_CLK_SCU_ALL>, <&mstp10_clks R8A7791_CLK_SCU_ALL>; + + #clock-cells = <1>; + clock-indices = < + R8A7791_CLK_SSI_ALL + R8A7791_CLK_SSI9 R8A7791_CLK_SSI8 R8A7791_CLK_SSI7 R8A7791_CLK_SSI6 R8A7791_CLK_SSI5 + R8A7791_CLK_SSI4 R8A7791_CLK_SSI3 R8A7791_CLK_SSI2 R8A7791_CLK_SSI1 R8A7791_CLK_SSI0 + R8A7791_CLK_SCU_ALL + R8A7791_CLK_SCU_DVC1 R8A7791_CLK_SCU_DVC0 + R8A7791_CLK_SCU_SRC9 R8A7791_CLK_SCU_SRC8 R8A7791_CLK_SCU_SRC7 R8A7791_CLK_SCU_SRC6 R8A7791_CLK_SCU_SRC5 + R8A7791_CLK_SCU_SRC4 R8A7791_CLK_SCU_SRC3 R8A7791_CLK_SCU_SRC2 R8A7791_CLK_SCU_SRC1 R8A7791_CLK_SCU_SRC0 + >; + clock-output-names = + "ssi-all", + "ssi9", "ssi8", "ssi7", "ssi6", "ssi5", + "ssi4", "ssi3", "ssi2", "ssi1", "ssi0", + "scu-all", + "scu-dvc1", "scu-dvc0", + "scu-src9", "scu-src8", "scu-src7", "scu-src6", "scu-src5", + "scu-src4", "scu-src3", "scu-src2", "scu-src1", "scu-src0"; + }; mstp11_clks: mstp11_clks@e615099c { compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; @@ -880,4 +960,132 @@ msiof2: spi@e6e00000 { #size-cells = <0>; status = "disabled"; }; + + pci0: pci@ee090000 { + compatible = "renesas,pci-r8a7791"; + device_type = "pci"; + clocks = <&mstp7_clks R8A7791_CLK_EHCI>; + reg = <0 0xee090000 0 0xc00>, + <0 0xee080000 0 0x1100>; + interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee080000 0 0xee080000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>; + }; + + pci1: pci@ee0d0000 { + compatible = "renesas,pci-r8a7791"; + device_type = "pci"; + clocks = <&mstp7_clks R8A7791_CLK_EHCI>; + reg = <0 0xee0d0000 0 0xc00>, + <0 0xee0c0000 0 0x1100>; + interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + + bus-range = <1 1>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x02000000 0 0xee0c0000 0 0xee0c0000 0 0x00010000>; + interrupt-map-mask = <0xff00 0 0 0x7>; + interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH + 0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>; + }; + + pciec: pcie@fe000000 { + compatible = "renesas,pcie-r8a7791"; + reg = <0 0xfe000000 0 0x80000>; + #address-cells = <3>; + #size-cells = <2>; + bus-range = <0x00 0xff>; + device_type = "pci"; + ranges = <0x01000000 0 0x00000000 0 0xfe100000 0 0x00100000 + 0x02000000 0 0xfe200000 0 0xfe200000 0 0x00200000 + 0x02000000 0 0x30000000 0 0x30000000 0 0x08000000 + 0x42000000 0 0x38000000 0 0x38000000 0 0x08000000>; + /* Map all possible DDR as inbound ranges */ + dma-ranges = <0x42000000 0 0x40000000 0 0x40000000 0 0x80000000 + 0x43000000 2 0x00000000 2 0x00000000 1 0x00000000>; + interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>, + <0 117 IRQ_TYPE_LEVEL_HIGH>, + <0 118 IRQ_TYPE_LEVEL_HIGH>; + #interrupt-cells = <1>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &gic 0 116 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7791_CLK_PCIEC>, <&pcie_bus_clk>; + clock-names = "pcie", "pcie_bus"; + status = "disabled"; + }; + + rcar_sound: rcar_sound@0xec500000 { + #sound-dai-cells = <1>; + compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound"; + interrupt-parent = <&gic>; + reg = <0 0xec500000 0 0x1000>, /* SCU */ + <0 0xec5a0000 0 0x100>, /* ADG */ + <0 0xec540000 0 0x1000>, /* SSIU */ + <0 0xec541000 0 0x1280>; /* SSI */ + clocks = <&mstp10_clks R8A7791_CLK_SSI_ALL>, + <&mstp10_clks R8A7791_CLK_SSI9>, <&mstp10_clks R8A7791_CLK_SSI8>, + <&mstp10_clks R8A7791_CLK_SSI7>, <&mstp10_clks R8A7791_CLK_SSI6>, + <&mstp10_clks R8A7791_CLK_SSI5>, <&mstp10_clks R8A7791_CLK_SSI4>, + <&mstp10_clks R8A7791_CLK_SSI3>, <&mstp10_clks R8A7791_CLK_SSI2>, + <&mstp10_clks R8A7791_CLK_SSI1>, <&mstp10_clks R8A7791_CLK_SSI0>, + <&mstp10_clks R8A7791_CLK_SCU_SRC9>, <&mstp10_clks R8A7791_CLK_SCU_SRC8>, + <&mstp10_clks R8A7791_CLK_SCU_SRC7>, <&mstp10_clks R8A7791_CLK_SCU_SRC6>, + <&mstp10_clks R8A7791_CLK_SCU_SRC5>, <&mstp10_clks R8A7791_CLK_SCU_SRC4>, + <&mstp10_clks R8A7791_CLK_SCU_SRC3>, <&mstp10_clks R8A7791_CLK_SCU_SRC2>, + <&mstp10_clks R8A7791_CLK_SCU_SRC1>, <&mstp10_clks R8A7791_CLK_SCU_SRC0>, + <&mstp10_clks R8A7791_CLK_SCU_DVC0>, <&mstp10_clks R8A7791_CLK_SCU_DVC1>, + <&audio_clk_a>, <&audio_clk_b>, <&audio_clk_c>, <&m2_clk>; + clock-names = "ssi-all", + "ssi.9", "ssi.8", "ssi.7", "ssi.6", "ssi.5", + "ssi.4", "ssi.3", "ssi.2", "ssi.1", "ssi.0", + "src.9", "src.8", "src.7", "src.6", "src.5", + "src.4", "src.3", "src.2", "src.1", "src.0", + "dvc.0", "dvc.1", + "clk_a", "clk_b", "clk_c", "clk_i"; + + status = "disabled"; + + rcar_sound,dvc { + dvc0: dvc@0 { }; + dvc1: dvc@1 { }; + }; + + rcar_sound,src { + src0: src@0 { }; + src1: src@1 { }; + src2: src@2 { }; + src3: src@3 { }; + src4: src@4 { }; + src5: src@5 { }; + src6: src@6 { }; + src7: src@7 { }; + src8: src@8 { }; + src9: src@9 { }; + }; + + rcar_sound,ssi { + ssi0: ssi@0 { interrupts = <0 370 IRQ_TYPE_LEVEL_HIGH>; }; + ssi1: ssi@1 { interrupts = <0 371 IRQ_TYPE_LEVEL_HIGH>; }; + ssi2: ssi@2 { interrupts = <0 372 IRQ_TYPE_LEVEL_HIGH>; }; + ssi3: ssi@3 { interrupts = <0 373 IRQ_TYPE_LEVEL_HIGH>; }; + ssi4: ssi@4 { interrupts = <0 374 IRQ_TYPE_LEVEL_HIGH>; }; + ssi5: ssi@5 { interrupts = <0 375 IRQ_TYPE_LEVEL_HIGH>; }; + ssi6: ssi@6 { interrupts = <0 376 IRQ_TYPE_LEVEL_HIGH>; }; + ssi7: ssi@7 { interrupts = <0 377 IRQ_TYPE_LEVEL_HIGH>; }; + ssi8: ssi@8 { interrupts = <0 378 IRQ_TYPE_LEVEL_HIGH>; }; + ssi9: ssi@9 { interrupts = <0 379 IRQ_TYPE_LEVEL_HIGH>; }; + }; + }; }; diff --git a/arch/arm/boot/dts/rk3066a-bqcurie2.dts b/arch/arm/boot/dts/rk3066a-bqcurie2.dts index afb327322a4a6d40538f30cdfca33aa3b25b39e3..042f821d9e4d8bdbe0ab48722293278a86a44496 100644 --- a/arch/arm/boot/dts/rk3066a-bqcurie2.dts +++ b/arch/arm/boot/dts/rk3066a-bqcurie2.dts @@ -24,87 +24,171 @@ memory { reg = <0x60000000 0x40000000>; }; - soc { - uart0: serial@10124000 { - status = "okay"; - }; + vcc_sd0: fixed-regulator { + compatible = "regulator-fixed"; + regulator-name = "sdmmc-supply"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; - uart1: serial@10126000 { - status = "okay"; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@0 { + gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; }; - - uart2: serial@20064000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_xfer>; - status = "okay"; + button@1 { + gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ + linux,code = <104>; + label = "GPIO Key Vol-"; + linux,input-type = <1>; + gpio-key,wakeup = <0>; + debounce-interval = <100>; }; + /* VOL+ comes somehow thru the ADC */ + }; +}; - uart3: serial@20068000 { - status = "okay"; - }; +&i2c1 { + status = "okay"; + clock-frequency = <400000>; - vcc_sd0: fixed-regulator { - compatible = "regulator-fixed"; - regulator-name = "sdmmc-supply"; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - gpio = <&gpio3 7 GPIO_ACTIVE_LOW>; - startup-delay-us = <100000>; - }; + tps: tps@2d { + reg = <0x2d>; - dwmmc@10214000 { /* sdmmc */ - num-slots = <1>; - status = "okay"; + interrupt-parent = <&gpio6>; + interrupts = <6 IRQ_TYPE_LEVEL_LOW>; - pinctrl-names = "default"; - pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>; - vmmc-supply = <&vcc_sd0>; + vcc5-supply = <&vcc_io>; + vcc6-supply = <&vcc_io>; - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; + regulators { + vcc_rtc: regulator@0 { + regulator-name = "vcc_rtc"; + regulator-always-on; }; - }; - dwmmc@10218000 { /* wifi */ - num-slots = <1>; - status = "okay"; - non-removable; + vcc_io: regulator@1 { + regulator-name = "vcc_io"; + regulator-always-on; + }; - pinctrl-names = "default"; - pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; + vdd_arm: regulator@2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; - slot@0 { - reg = <0>; - bus-width = <4>; - disable-wp; + vcc_ddr: regulator@3 { + regulator-name = "vcc_ddr"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + vcc18_cif: regulator@5 { + regulator-name = "vcc18_cif"; + regulator-always-on; + }; + + vdd_11: regulator@6 { + regulator-name = "vdd_11"; + regulator-always-on; + }; + + vcc_25: regulator@7 { + regulator-name = "vcc_25"; + regulator-always-on; + }; + + vcc_18: regulator@8 { + regulator-name = "vcc_18"; + regulator-always-on; + }; + + vcc25_hdmi: regulator@9 { + regulator-name = "vcc25_hdmi"; + regulator-always-on; + }; + + vcca_33: regulator@10 { + regulator-name = "vcca_33"; + regulator-always-on; }; - }; - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - button@0 { - gpios = <&gpio6 2 GPIO_ACTIVE_LOW>; /* GPIO6_A2 */ - linux,code = <116>; - label = "GPIO Key Power"; - linux,input-type = <1>; - gpio-key,wakeup = <1>; - debounce-interval = <100>; + vcc_tp: regulator@11 { + regulator-name = "vcc_tp"; + regulator-always-on; }; - button@1 { - gpios = <&gpio4 21 GPIO_ACTIVE_LOW>; /* GPIO4_C5 */ - linux,code = <104>; - label = "GPIO Key Vol-"; - linux,input-type = <1>; - gpio-key,wakeup = <0>; - debounce-interval = <100>; + + vcc28_cif: regulator@12 { + regulator-name = "vcc28_cif"; + regulator-always-on; }; - /* VOL+ comes somehow thru the ADC */ }; }; }; + +/* must be included after &tps gets defined */ +#include "tps65910.dtsi" + +&mmc0 { /* sdmmc */ + num-slots = <1>; + status = "okay"; + vmmc-supply = <&vcc_sd0>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; +}; + +&mmc1 { /* wifi */ + num-slots = <1>; + status = "okay"; + non-removable; + + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3066a-clocks.dtsi b/arch/arm/boot/dts/rk3066a-clocks.dtsi deleted file mode 100644 index 6e307fc4c451d6cfc90a132fe532aa293a2e9158..0000000000000000000000000000000000000000 --- a/arch/arm/boot/dts/rk3066a-clocks.dtsi +++ /dev/null @@ -1,299 +0,0 @@ -/* - * Copyright (c) 2013 MundoReader S.L. - * Author: Heiko Stuebner - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/ { - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - compatible = "fixed-clock"; - clock-frequency = <0>; - #clock-cells = <0>; - }; - - xin24m: xin24m { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - #clock-cells = <0>; - }; - - dummy48m: dummy48m { - compatible = "fixed-clock"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; - - dummy150m: dummy150m { - compatible = "fixed-clock"; - clock-frequency = <150000000>; - #clock-cells = <0>; - }; - - clk_gates0: gate-clk@200000d0 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000d0 0x4>; - clocks = <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_core_periph", "gate_cpu_gpll", - "gate_ddrphy", "gate_aclk_cpu", - "gate_hclk_cpu", "gate_pclk_cpu", - "gate_atclk_cpu", "gate_i2s0", - "gate_i2s0_frac", "gate_i2s1", - "gate_i2s1_frac", "gate_i2s2", - "gate_i2s2_frac", "gate_spdif", - "gate_spdif_frac", "gate_testclk"; - - #clock-cells = <1>; - }; - - clk_gates1: gate-clk@200000d4 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000d4 0x4>; - clocks = <&xin24m>, <&xin24m>, - <&xin24m>, <&dummy>, - <&dummy>, <&xin24m>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>; - - clock-output-names = - "gate_timer0", "gate_timer1", - "gate_timer2", "gate_jtag", - "gate_aclk_lcdc1_src", "gate_otgphy0", - "gate_otgphy1", "gate_ddr_gpll", - "gate_uart0", "gate_frac_uart0", - "gate_uart1", "gate_frac_uart1", - "gate_uart2", "gate_frac_uart2", - "gate_uart3", "gate_frac_uart3"; - - #clock-cells = <1>; - }; - - clk_gates2: gate-clk@200000d8 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000d8 0x4>; - clocks = <&clk_gates2 1>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&clk_gates2 3>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy48m>, - <&dummy>, <&dummy48m>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_periph_src", "gate_aclk_periph", - "gate_hclk_periph", "gate_pclk_periph", - "gate_smc", "gate_mac", - "gate_hsadc", "gate_hsadc_frac", - "gate_saradc", "gate_spi0", - "gate_spi1", "gate_mmc0", - "gate_mac_lbtest", "gate_mmc1", - "gate_emmc", "gate_tsadc"; - - #clock-cells = <1>; - }; - - clk_gates3: gate-clk@200000dc { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000dc 0x4>; - clocks = <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_aclk_lcdc0_src", "gate_dclk_lcdc0", - "gate_dclk_lcdc1", "gate_pclkin_cif0", - "gate_pclkin_cif1", "reserved", - "reserved", "gate_cif0_out", - "gate_cif1_out", "gate_aclk_vepu", - "gate_hclk_vepu", "gate_aclk_vdpu", - "gate_hclk_vdpu", "gate_gpu_src", - "reserved", "gate_xin27m"; - - #clock-cells = <1>; - }; - - clk_gates4: gate-clk@200000e0 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000e0 0x4>; - clocks = <&clk_gates2 2>, <&clk_gates2 3>, - <&clk_gates2 1>, <&clk_gates2 1>, - <&clk_gates2 1>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates2 2>, - <&clk_gates0 4>, <&clk_gates0 4>, - <&clk_gates0 3>, <&clk_gates0 3>, - <&clk_gates0 3>, <&clk_gates2 3>, - <&clk_gates0 4>; - - clock-output-names = - "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix", - "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix", - "gate_aclk_pei_niu", "gate_hclk_usb_peri", - "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri", - "gate_hclk_cpubus", "gate_hclk_ahb2apb", - "gate_aclk_strc_sys", "gate_aclk_l2mem_con", - "gate_aclk_intmem", "gate_pclk_tsadc", - "gate_hclk_hdmi"; - - #clock-cells = <1>; - }; - - clk_gates5: gate-clk@200000e4 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000e4 0x4>; - clocks = <&clk_gates0 3>, <&clk_gates2 1>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates0 4>, <&clk_gates0 5>, - <&clk_gates2 1>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates4 5>, - <&clk_gates4 5>, <&dummy>; - - clock-output-names = - "gate_aclk_dmac1", "gate_aclk_dmac2", - "gate_pclk_efuse", "gate_pclk_tzpc", - "gate_pclk_grf", "gate_pclk_pmu", - "gate_hclk_rom", "gate_pclk_ddrupctl", - "gate_aclk_smc", "gate_hclk_nandc", - "gate_hclk_mmc0", "gate_hclk_mmc1", - "gate_hclk_emmc", "gate_hclk_otg0", - "gate_hclk_otg1", "gate_aclk_gpu"; - - #clock-cells = <1>; - }; - - clk_gates6: gate-clk@200000e8 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000e8 0x4>; - clocks = <&clk_gates3 0>, <&clk_gates0 4>, - <&clk_gates0 4>, <&clk_gates1 4>, - <&clk_gates0 4>, <&clk_gates3 0>, - <&clk_gates0 4>, <&clk_gates1 4>, - <&clk_gates3 0>, <&clk_gates0 4>, - <&clk_gates0 4>, <&clk_gates1 4>, - <&clk_gates0 4>, <&clk_gates3 0>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_aclk_lcdc0", "gate_hclk_lcdc0", - "gate_hclk_lcdc1", "gate_aclk_lcdc1", - "gate_hclk_cif0", "gate_aclk_cif0", - "gate_hclk_cif1", "gate_aclk_cif1", - "gate_aclk_ipp", "gate_hclk_ipp", - "gate_hclk_rga", "gate_aclk_rga", - "gate_hclk_vio_bus", "gate_aclk_vio0", - "gate_aclk_vcodec", "gate_shclk_vio_h2h"; - - #clock-cells = <1>; - }; - - clk_gates7: gate-clk@200000ec { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000ec 0x4>; - clocks = <&clk_gates2 2>, <&clk_gates0 4>, - <&clk_gates0 4>, <&clk_gates0 4>, - <&clk_gates0 4>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates0 5>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates0 5>, <&clk_gates2 3>, - <&clk_gates2 3>, <&clk_gates2 3>, - <&clk_gates2 3>, <&clk_gates2 3>; - - clock-output-names = - "gate_hclk_emac", "gate_hclk_spdif", - "gate_hclk_i2s0_2ch", "gate_hclk_i2s1_2ch", - "gate_hclk_i2s_8ch", "gate_hclk_hsadc", - "gate_hclk_pidf", "gate_pclk_timer0", - "gate_pclk_timer1", "gate_pclk_timer2", - "gate_pclk_pwm01", "gate_pclk_pwm23", - "gate_pclk_spi0", "gate_pclk_spi1", - "gate_pclk_saradc", "gate_pclk_wdt"; - - #clock-cells = <1>; - }; - - clk_gates8: gate-clk@200000f0 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000f0 0x4>; - clocks = <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates2 3>, <&clk_gates2 3>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates2 3>, <&clk_gates2 3>, - <&clk_gates2 3>, <&clk_gates0 5>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates2 3>, <&clk_gates2 3>, - <&dummy>, <&clk_gates0 5>; - - clock-output-names = - "gate_pclk_uart0", "gate_pclk_uart1", - "gate_pclk_uart2", "gate_pclk_uart3", - "gate_pclk_i2c0", "gate_pclk_i2c1", - "gate_pclk_i2c2", "gate_pclk_i2c3", - "gate_pclk_i2c4", "gate_pclk_gpio0", - "gate_pclk_gpio1", "gate_pclk_gpio2", - "gate_pclk_gpio3", "gate_pclk_gpio4", - "reserved", "gate_pclk_gpio6"; - - #clock-cells = <1>; - }; - - clk_gates9: gate-clk@200000f4 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000f4 0x4>; - clocks = <&dummy>, <&clk_gates0 5>, - <&dummy>, <&dummy>, - <&dummy>, <&clk_gates1 4>, - <&clk_gates0 5>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>; - - clock-output-names = - "gate_clk_core_dbg", "gate_pclk_dbg", - "gate_clk_trace", "gate_atclk", - "gate_clk_l2c", "gate_aclk_vio1", - "gate_pclk_publ", "gate_aclk_intmem0", - "gate_aclk_intmem1", "gate_aclk_intmem2", - "gate_aclk_intmem3"; - - #clock-cells = <1>; - }; - }; - -}; diff --git a/arch/arm/boot/dts/rk3066a.dtsi b/arch/arm/boot/dts/rk3066a.dtsi index 4387cfd420baff8aa1a42bd20a2e6c5b29b820af..879a818fba51797062b4f5e7cbca58dc14b4a863 100644 --- a/arch/arm/boot/dts/rk3066a.dtsi +++ b/arch/arm/boot/dts/rk3066a.dtsi @@ -15,8 +15,8 @@ #include #include +#include #include "rk3xxx.dtsi" -#include "rk3066a-clocks.dtsi" / { compatible = "rockchip,rk3066a"; @@ -40,247 +40,392 @@ cpu@1 { }; }; - soc { - timer@20038000 { - compatible = "snps,dw-apb-timer-osc"; - reg = <0x20038000 0x100>; - interrupts = ; - clocks = <&clk_gates1 0>, <&clk_gates7 7>; - clock-names = "timer", "pclk"; + sram: sram@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x10000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10080000 0x10000>; + + smp-sram@0 { + compatible = "rockchip,rk3066-smp-sram"; + reg = <0x0 0x50>; }; + }; + + cru: clock-controller@20000000 { + compatible = "rockchip,rk3066a-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; - timer@2003a000 { - compatible = "snps,dw-apb-timer-osc"; - reg = <0x2003a000 0x100>; - interrupts = ; - clocks = <&clk_gates1 1>, <&clk_gates7 8>; - clock-names = "timer", "pclk"; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + timer@2000e000 { + compatible = "snps,dw-apb-timer-osc"; + reg = <0x2000e000 0x100>; + interrupts = ; + clocks = <&cru SCLK_TIMER2>, <&cru PCLK_TIMER2>; + clock-names = "timer", "pclk"; + }; + + timer@20038000 { + compatible = "snps,dw-apb-timer-osc"; + reg = <0x20038000 0x100>; + interrupts = ; + clocks = <&cru SCLK_TIMER0>, <&cru PCLK_TIMER0>; + clock-names = "timer", "pclk"; + }; + + timer@2003a000 { + compatible = "snps,dw-apb-timer-osc"; + reg = <0x2003a000 0x100>; + interrupts = ; + clocks = <&cru SCLK_TIMER1>, <&cru PCLK_TIMER1>; + clock-names = "timer", "pclk"; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3066a-pinctrl"; + rockchip,grf = <&grf>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@20034000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20034000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO0>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; }; - timer@2000e000 { - compatible = "snps,dw-apb-timer-osc"; - reg = <0x2000e000 0x100>; - interrupts = ; - clocks = <&clk_gates1 2>, <&clk_gates7 9>; - clock-names = "timer", "pclk"; + gpio1: gpio1@2003c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003c000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO1>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; }; - sram: sram@10080000 { - compatible = "mmio-sram"; - reg = <0x10080000 0x10000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x10080000 0x10000>; + gpio2: gpio2@2003e000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003e000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO2>; - smp-sram@0 { - compatible = "rockchip,rk3066-smp-sram"; - reg = <0x0 0x50>; - }; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@20080000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20080000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO3>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; }; - pinctrl@20008000 { - compatible = "rockchip,rk3066a-pinctrl"; - rockchip,grf = <&grf>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + gpio4: gpio4@20084000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20084000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO4>; - gpio0: gpio0@20034000 { - compatible = "rockchip,gpio-bank"; - reg = <0x20034000 0x100>; - interrupts = ; - clocks = <&clk_gates8 9>; + gpio-controller; + #gpio-cells = <2>; - gpio-controller; - #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; - interrupt-controller; - #interrupt-cells = <2>; + gpio6: gpio6@2000a000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2000a000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO6>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_default: pcfg_pull_default { + bias-pull-pin-default; + }; + + pcfg_pull_none: pcfg_pull_none { + bias-disable; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = , + ; }; + }; - gpio1: gpio1@2003c000 { - compatible = "rockchip,gpio-bank"; - reg = <0x2003c000 0x100>; - interrupts = ; - clocks = <&clk_gates8 10>; + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = , + ; + }; + }; - gpio-controller; - #gpio-cells = <2>; + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = , + ; + }; + }; - interrupt-controller; - #interrupt-cells = <2>; + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = , + ; }; + }; - gpio2: gpio2@2003e000 { - compatible = "rockchip,gpio-bank"; - reg = <0x2003e000 0x100>; - interrupts = ; - clocks = <&clk_gates8 11>; + i2c4 { + i2c4_xfer: i2c4-xfer { + rockchip,pins = , + ; + }; + }; - gpio-controller; - #gpio-cells = <2>; + pwm0 { + pwm0_out: pwm0-out { + rockchip,pins = ; + }; + }; - interrupt-controller; - #interrupt-cells = <2>; + pwm1 { + pwm1_out: pwm1-out { + rockchip,pins = ; }; + }; - gpio3: gpio3@20080000 { - compatible = "rockchip,gpio-bank"; - reg = <0x20080000 0x100>; - interrupts = ; - clocks = <&clk_gates8 12>; + pwm2 { + pwm2_out: pwm2-out { + rockchip,pins = ; + }; + }; - gpio-controller; - #gpio-cells = <2>; + pwm3 { + pwm3_out: pwm3-out { + rockchip,pins = ; + }; + }; - interrupt-controller; - #interrupt-cells = <2>; + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = , + ; }; - gpio4: gpio4@20084000 { - compatible = "rockchip,gpio-bank"; - reg = <0x20084000 0x100>; - interrupts = ; - clocks = <&clk_gates8 13>; + uart0_cts: uart0-cts { + rockchip,pins = ; + }; - gpio-controller; - #gpio-cells = <2>; + uart0_rts: uart0-rts { + rockchip,pins = ; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = , + ; + }; - interrupt-controller; - #interrupt-cells = <2>; + uart1_cts: uart1-cts { + rockchip,pins = ; }; - gpio6: gpio6@2000a000 { - compatible = "rockchip,gpio-bank"; - reg = <0x2000a000 0x100>; - interrupts = ; - clocks = <&clk_gates8 15>; + uart1_rts: uart1-rts { + rockchip,pins = ; + }; + }; - gpio-controller; - #gpio-cells = <2>; + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = , + ; + }; + /* no rts / cts for uart2 */ + }; - interrupt-controller; - #interrupt-cells = <2>; + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = , + ; }; - pcfg_pull_default: pcfg_pull_default { - bias-pull-pin-default; + uart3_cts: uart3-cts { + rockchip,pins = ; }; - pcfg_pull_none: pcfg_pull_none { - bias-disable; + uart3_rts: uart3-rts { + rockchip,pins = ; }; + }; - uart0 { - uart0_xfer: uart0-xfer { - rockchip,pins = , - ; - }; + sd0 { + sd0_clk: sd0-clk { + rockchip,pins = ; + }; - uart0_cts: uart0-cts { - rockchip,pins = ; - }; + sd0_cmd: sd0-cmd { + rockchip,pins = ; + }; - uart0_rts: uart0-rts { - rockchip,pins = ; - }; + sd0_cd: sd0-cd { + rockchip,pins = ; }; - uart1 { - uart1_xfer: uart1-xfer { - rockchip,pins = , - ; - }; + sd0_wp: sd0-wp { + rockchip,pins = ; + }; - uart1_cts: uart1-cts { - rockchip,pins = ; - }; + sd0_bus1: sd0-bus-width1 { + rockchip,pins = ; + }; - uart1_rts: uart1-rts { - rockchip,pins = ; - }; + sd0_bus4: sd0-bus-width4 { + rockchip,pins = , + , + , + ; }; + }; - uart2 { - uart2_xfer: uart2-xfer { - rockchip,pins = , - ; - }; - /* no rts / cts for uart2 */ + sd1 { + sd1_clk: sd1-clk { + rockchip,pins = ; }; - uart3 { - uart3_xfer: uart3-xfer { - rockchip,pins = , - ; - }; + sd1_cmd: sd1-cmd { + rockchip,pins = ; + }; - uart3_cts: uart3-cts { - rockchip,pins = ; - }; + sd1_cd: sd1-cd { + rockchip,pins = ; + }; - uart3_rts: uart3-rts { - rockchip,pins = ; - }; + sd1_wp: sd1-wp { + rockchip,pins = ; }; - sd0 { - sd0_clk: sd0-clk { - rockchip,pins = ; - }; - - sd0_cmd: sd0-cmd { - rockchip,pins = ; - }; - - sd0_cd: sd0-cd { - rockchip,pins = ; - }; - - sd0_wp: sd0-wp { - rockchip,pins = ; - }; - - sd0_bus1: sd0-bus-width1 { - rockchip,pins = ; - }; - - sd0_bus4: sd0-bus-width4 { - rockchip,pins = , - , - , - ; - }; + sd1_bus1: sd1-bus-width1 { + rockchip,pins = ; }; - sd1 { - sd1_clk: sd1-clk { - rockchip,pins = ; - }; - - sd1_cmd: sd1-cmd { - rockchip,pins = ; - }; - - sd1_cd: sd1-cd { - rockchip,pins = ; - }; - - sd1_wp: sd1-wp { - rockchip,pins = ; - }; - - sd1_bus1: sd1-bus-width1 { - rockchip,pins = ; - }; - - sd1_bus4: sd1-bus-width4 { - rockchip,pins = , - , - , - ; - }; + sd1_bus4: sd1-bus-width4 { + rockchip,pins = , + , + , + ; }; }; }; }; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; +}; + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; +}; + +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_xfer>; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4>; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_out>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_out>; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_out>; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_out>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>; +}; + +&wdt { + compatible = "rockchip,rk3066-wdt", "snps,dw-wdt"; +}; diff --git a/arch/arm/boot/dts/rk3188-clocks.dtsi b/arch/arm/boot/dts/rk3188-clocks.dtsi deleted file mode 100644 index b1b92dc245ce0dbe62fd4b8335eeeee8658dd6d3..0000000000000000000000000000000000000000 --- a/arch/arm/boot/dts/rk3188-clocks.dtsi +++ /dev/null @@ -1,289 +0,0 @@ -/* - * Copyright (c) 2013 MundoReader S.L. - * Author: Heiko Stuebner - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -/ { - clocks { - #address-cells = <1>; - #size-cells = <1>; - ranges; - - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - dummy: dummy { - compatible = "fixed-clock"; - clock-frequency = <0>; - #clock-cells = <0>; - }; - - xin24m: xin24m { - compatible = "fixed-clock"; - clock-frequency = <24000000>; - #clock-cells = <0>; - }; - - dummy48m: dummy48m { - compatible = "fixed-clock"; - clock-frequency = <48000000>; - #clock-cells = <0>; - }; - - dummy150m: dummy150m { - compatible = "fixed-clock"; - clock-frequency = <150000000>; - #clock-cells = <0>; - }; - - clk_gates0: gate-clk@200000d0 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000d0 0x4>; - clocks = <&dummy150m>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_core_periph", "gate_cpu_gpll", - "gate_ddrphy", "gate_aclk_cpu", - "gate_hclk_cpu", "gate_pclk_cpu", - "gate_atclk_cpu", "gate_aclk_core", - "reserved", "gate_i2s0", - "gate_i2s0_frac", "reserved", - "reserved", "gate_spdif", - "gate_spdif_frac", "gate_testclk"; - - #clock-cells = <1>; - }; - - clk_gates1: gate-clk@200000d4 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000d4 0x4>; - clocks = <&xin24m>, <&xin24m>, - <&xin24m>, <&dummy>, - <&dummy>, <&xin24m>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>, - <&xin24m>, <&dummy>; - - clock-output-names = - "gate_timer0", "gate_timer1", - "gate_timer3", "gate_jtag", - "gate_aclk_lcdc1_src", "gate_otgphy0", - "gate_otgphy1", "gate_ddr_gpll", - "gate_uart0", "gate_frac_uart0", - "gate_uart1", "gate_frac_uart1", - "gate_uart2", "gate_frac_uart2", - "gate_uart3", "gate_frac_uart3"; - - #clock-cells = <1>; - }; - - clk_gates2: gate-clk@200000d8 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000d8 0x4>; - clocks = <&clk_gates2 1>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&clk_gates2 3>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy48m>, - <&dummy>, <&dummy48m>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_periph_src", "gate_aclk_periph", - "gate_hclk_periph", "gate_pclk_periph", - "gate_smc", "gate_mac", - "gate_hsadc", "gate_hsadc_frac", - "gate_saradc", "gate_spi0", - "gate_spi1", "gate_mmc0", - "gate_mac_lbtest", "gate_mmc1", - "gate_emmc", "reserved"; - - #clock-cells = <1>; - }; - - clk_gates3: gate-clk@200000dc { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000dc 0x4>; - clocks = <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&xin24m>, <&xin24m>, - <&dummy>, <&dummy>, - <&xin24m>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&xin24m>, <&dummy>; - - clock-output-names = - "gate_aclk_lcdc0_src", "gate_dclk_lcdc0", - "gate_dclk_lcdc1", "gate_pclkin_cif0", - "gate_timer2", "gate_timer4", - "gate_hsicphy", "gate_cif0_out", - "gate_timer5", "gate_aclk_vepu", - "gate_hclk_vepu", "gate_aclk_vdpu", - "gate_hclk_vdpu", "reserved", - "gate_timer6", "gate_aclk_gpu_src"; - - #clock-cells = <1>; - }; - - clk_gates4: gate-clk@200000e0 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000e0 0x4>; - clocks = <&clk_gates2 2>, <&clk_gates2 3>, - <&clk_gates2 1>, <&clk_gates2 1>, - <&clk_gates2 1>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates2 2>, - <&clk_gates0 4>, <&clk_gates0 4>, - <&clk_gates0 3>, <&dummy>, - <&clk_gates0 3>, <&dummy>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_hclk_peri_axi_matrix", "gate_pclk_peri_axi_matrix", - "gate_aclk_cpu_peri", "gate_aclk_peri_axi_matrix", - "gate_aclk_pei_niu", "gate_hclk_usb_peri", - "gate_hclk_peri_ahb_arbi", "gate_hclk_emem_peri", - "gate_hclk_cpubus", "gate_hclk_ahb2apb", - "gate_aclk_strc_sys", "reserved", - "gate_aclk_intmem", "reserved", - "gate_hclk_imem1", "gate_hclk_imem0"; - - #clock-cells = <1>; - }; - - clk_gates5: gate-clk@200000e4 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000e4 0x4>; - clocks = <&clk_gates0 3>, <&clk_gates2 1>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates0 4>, <&clk_gates0 5>, - <&clk_gates2 1>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates4 5>; - - clock-output-names = - "gate_aclk_dmac1", "gate_aclk_dmac2", - "gate_pclk_efuse", "gate_pclk_tzpc", - "gate_pclk_grf", "gate_pclk_pmu", - "gate_hclk_rom", "gate_pclk_ddrupctl", - "gate_aclk_smc", "gate_hclk_nandc", - "gate_hclk_mmc0", "gate_hclk_mmc1", - "gate_hclk_emmc", "gate_hclk_otg0"; - - #clock-cells = <1>; - }; - - clk_gates6: gate-clk@200000e8 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000e8 0x4>; - clocks = <&clk_gates3 0>, <&clk_gates0 4>, - <&clk_gates0 4>, <&clk_gates1 4>, - <&clk_gates0 4>, <&clk_gates3 0>, - <&dummy>, <&dummy>, - <&clk_gates3 0>, <&clk_gates0 4>, - <&clk_gates0 4>, <&clk_gates1 4>, - <&clk_gates0 4>, <&clk_gates3 0>; - - clock-output-names = - "gate_aclk_lcdc0", "gate_hclk_lcdc0", - "gate_hclk_lcdc1", "gate_aclk_lcdc1", - "gate_hclk_cif0", "gate_aclk_cif0", - "reserved", "reserved", - "gate_aclk_ipp", "gate_hclk_ipp", - "gate_hclk_rga", "gate_aclk_rga", - "gate_hclk_vio_bus", "gate_aclk_vio0"; - - #clock-cells = <1>; - }; - - clk_gates7: gate-clk@200000ec { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000ec 0x4>; - clocks = <&clk_gates2 2>, <&clk_gates0 4>, - <&clk_gates0 4>, <&dummy>, - <&dummy>, <&clk_gates2 2>, - <&clk_gates2 2>, <&clk_gates0 5>, - <&dummy>, <&clk_gates0 5>, - <&clk_gates0 5>, <&clk_gates2 3>, - <&clk_gates2 3>, <&clk_gates2 3>, - <&clk_gates2 3>, <&clk_gates2 3>; - - clock-output-names = - "gate_hclk_emac", "gate_hclk_spdif", - "gate_hclk_i2s0_2ch", "gate_hclk_otg1", - "gate_hclk_hsic", "gate_hclk_hsadc", - "gate_hclk_pidf", "gate_pclk_timer0", - "reserved", "gate_pclk_timer2", - "gate_pclk_pwm01", "gate_pclk_pwm23", - "gate_pclk_spi0", "gate_pclk_spi1", - "gate_pclk_saradc", "gate_pclk_wdt"; - - #clock-cells = <1>; - }; - - clk_gates8: gate-clk@200000f0 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000f0 0x4>; - clocks = <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates2 3>, <&clk_gates2 3>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates2 3>, <&clk_gates2 3>, - <&clk_gates2 3>, <&clk_gates0 5>, - <&clk_gates0 5>, <&clk_gates0 5>, - <&clk_gates2 3>, <&dummy>; - - clock-output-names = - "gate_pclk_uart0", "gate_pclk_uart1", - "gate_pclk_uart2", "gate_pclk_uart3", - "gate_pclk_i2c0", "gate_pclk_i2c1", - "gate_pclk_i2c2", "gate_pclk_i2c3", - "gate_pclk_i2c4", "gate_pclk_gpio0", - "gate_pclk_gpio1", "gate_pclk_gpio2", - "gate_pclk_gpio3", "gate_aclk_gps"; - - #clock-cells = <1>; - }; - - clk_gates9: gate-clk@200000f4 { - compatible = "rockchip,rk2928-gate-clk"; - reg = <0x200000f4 0x4>; - clocks = <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>, - <&dummy>, <&dummy>; - - clock-output-names = - "gate_clk_core_dbg", "gate_pclk_dbg", - "gate_clk_trace", "gate_atclk", - "gate_clk_l2c", "gate_aclk_vio1", - "gate_pclk_publ", "gate_aclk_gpu"; - - #clock-cells = <1>; - }; - }; - -}; diff --git a/arch/arm/boot/dts/rk3188-radxarock.dts b/arch/arm/boot/dts/rk3188-radxarock.dts index a5eee55079cb7e622dfd6368cefff3b6329439a4..171b610db709f9e4f94355c31d54d858d89a84c2 100644 --- a/arch/arm/boot/dts/rk3188-radxarock.dts +++ b/arch/arm/boot/dts/rk3188-radxarock.dts @@ -23,59 +23,205 @@ memory { reg = <0x60000000 0x80000000>; }; - soc { - uart0: serial@10124000 { - status = "okay"; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + button@0 { + gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; }; + }; - uart1: serial@10126000 { - status = "okay"; + gpio-leds { + compatible = "gpio-leds"; + + green { + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; + default-state = "off"; }; - uart2: serial@20064000 { - pinctrl-names = "default"; - pinctrl-0 = <&uart2_xfer>; - status = "okay"; + yellow { + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + default-state = "off"; }; - uart3: serial@20068000 { - status = "okay"; + sleep { + gpios = <&gpio0 15 0>; + default-state = "off"; }; + }; - gpio-keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - autorepeat; - - button@0 { - gpios = <&gpio0 4 GPIO_ACTIVE_LOW>; - linux,code = <116>; - label = "GPIO Key Power"; - linux,input-type = <1>; - gpio-key,wakeup = <1>; - debounce-interval = <100>; + ir_recv: gpio-ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 10 1>; + pinctrl-names = "default"; + pinctrl-0 = <&ir_recv_pin>; + }; + + vcc_sd0: sdmmc-regulator { + compatible = "regulator-fixed"; + regulator-name = "sdmmc-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 1 GPIO_ACTIVE_LOW>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; +}; + +&i2c1 { + status = "okay"; + clock-frequency = <400000>; + + act8846: act8846@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&act8846_dvs0_ctl>; + + regulators { + vcc_ddr: REG1 { + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vdd_log: REG2 { + regulator-name = "VDD_LOG"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vdd_arm: REG3 { + regulator-name = "VDD_ARM"; + regulator-min-microvolt = <875000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + vcc_io: REG4 { + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_10: REG5 { + regulator-name = "VDD_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vdd_hdmi: REG6 { + regulator-name = "VDD_HDMI"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + + vcc18: REG7 { + regulator-name = "VCC_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; }; - }; - gpio-leds { - compatible = "gpio-leds"; + vcca_33: REG8 { + regulator-name = "VCCA_33"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcc_rmii: REG9 { + regulator-name = "VCC_RMII"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; - green { - gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; - default-state = "off"; + vccio_wl: REG10 { + regulator-name = "VCCIO_WL"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; }; - yellow { - gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; - default-state = "off"; + vcc_18: REG11 { + regulator-name = "VCC18_IO"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; }; - sleep { - gpios = <&gpio0 15 0>; - default-state = "off"; + vcc28: REG12 { + regulator-name = "VCC_28"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; }; }; + }; +}; + +&mmc0 { + num-slots = <1>; + status = "okay"; + vmmc-supply = <&vcc_sd0>; + slot@0 { + reg = <0>; + bus-width = <4>; + disable-wp; }; }; + +&pinctrl { + pcfg_output_low: pcfg-output-low { + output-low; + }; + + act8846 { + act8846_dvs0_ctl: act8846-dvs0-ctl { + rockchip,pins = ; + }; + }; + + ir-receiver { + ir_recv_pin: ir-recv-pin { + rockchip,pins = ; + }; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3188.dtsi b/arch/arm/boot/dts/rk3188.dtsi index 238c996d4a7f0d9ac98013bd5741665fb9db5fb3..ee801a9c6b74144e4a8153908a5e1ad07365bfef 100644 --- a/arch/arm/boot/dts/rk3188.dtsi +++ b/arch/arm/boot/dts/rk3188.dtsi @@ -15,8 +15,8 @@ #include #include +#include #include "rk3xxx.dtsi" -#include "rk3188-clocks.dtsi" / { compatible = "rockchip,rk3188"; @@ -52,215 +52,355 @@ cpu@3 { }; }; - soc { - global-timer@1013c200 { - interrupts = ; + sram: sram@10080000 { + compatible = "mmio-sram"; + reg = <0x10080000 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x10080000 0x8000>; + + smp-sram@0 { + compatible = "rockchip,rk3066-smp-sram"; + reg = <0x0 0x50>; }; + }; + + cru: clock-controller@20000000 { + compatible = "rockchip,rk3188-cru"; + reg = <0x20000000 0x1000>; + rockchip,grf = <&grf>; + + #clock-cells = <1>; + #reset-cells = <1>; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3188-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmu>; + + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@0x2000a000 { + compatible = "rockchip,rk3188-gpio-bank0"; + reg = <0x2000a000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO0>; + + gpio-controller; + #gpio-cells = <2>; - local-timer@1013c600 { - interrupts = ; + interrupt-controller; + #interrupt-cells = <2>; }; - sram: sram@10080000 { - compatible = "mmio-sram"; - reg = <0x10080000 0x8000>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0 0x10080000 0x8000>; + gpio1: gpio1@0x2003c000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003c000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO1>; - smp-sram@0 { - compatible = "rockchip,rk3066-smp-sram"; - reg = <0x0 0x50>; - }; + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; }; - pinctrl@20008000 { - compatible = "rockchip,rk3188-pinctrl"; - rockchip,grf = <&grf>; - rockchip,pmu = <&pmu>; + gpio2: gpio2@2003e000 { + compatible = "rockchip,gpio-bank"; + reg = <0x2003e000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO2>; - #address-cells = <1>; - #size-cells = <1>; - ranges; + gpio-controller; + #gpio-cells = <2>; - gpio0: gpio0@0x2000a000 { - compatible = "rockchip,rk3188-gpio-bank0"; - reg = <0x2000a000 0x100>; - interrupts = ; - clocks = <&clk_gates8 9>; + interrupt-controller; + #interrupt-cells = <2>; + }; - gpio-controller; - #gpio-cells = <2>; + gpio3: gpio3@20080000 { + compatible = "rockchip,gpio-bank"; + reg = <0x20080000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO3>; - interrupt-controller; - #interrupt-cells = <2>; - }; + gpio-controller; + #gpio-cells = <2>; - gpio1: gpio1@0x2003c000 { - compatible = "rockchip,gpio-bank"; - reg = <0x2003c000 0x100>; - interrupts = ; - clocks = <&clk_gates8 10>; + interrupt-controller; + #interrupt-cells = <2>; + }; - gpio-controller; - #gpio-cells = <2>; + pcfg_pull_up: pcfg_pull_up { + bias-pull-up; + }; - interrupt-controller; - #interrupt-cells = <2>; - }; + pcfg_pull_down: pcfg_pull_down { + bias-pull-down; + }; - gpio2: gpio2@2003e000 { - compatible = "rockchip,gpio-bank"; - reg = <0x2003e000 0x100>; - interrupts = ; - clocks = <&clk_gates8 11>; + pcfg_pull_none: pcfg_pull_none { + bias-disable; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = , + ; + }; + }; - gpio-controller; - #gpio-cells = <2>; + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = , + ; + }; + }; - interrupt-controller; - #interrupt-cells = <2>; + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = , + ; }; + }; - gpio3: gpio3@20080000 { - compatible = "rockchip,gpio-bank"; - reg = <0x20080000 0x100>; - interrupts = ; - clocks = <&clk_gates8 12>; + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = , + ; + }; + }; - gpio-controller; - #gpio-cells = <2>; + i2c4 { + i2c4_xfer: i2c4-xfer { + rockchip,pins = , + ; + }; + }; - interrupt-controller; - #interrupt-cells = <2>; + pwm0 { + pwm0_out: pwm0-out { + rockchip,pins = ; }; + }; - pcfg_pull_up: pcfg_pull_up { - bias-pull-up; + pwm1 { + pwm1_out: pwm1-out { + rockchip,pins = ; }; + }; - pcfg_pull_down: pcfg_pull_down { - bias-pull-down; + pwm2 { + pwm2_out: pwm2-out { + rockchip,pins = ; }; + }; - pcfg_pull_none: pcfg_pull_none { - bias-disable; + pwm3 { + pwm3_out: pwm3-out { + rockchip,pins = ; }; + }; - uart0 { - uart0_xfer: uart0-xfer { - rockchip,pins = , - ; - }; + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = , + ; + }; - uart0_cts: uart0-cts { - rockchip,pins = ; - }; + uart0_cts: uart0-cts { + rockchip,pins = ; + }; - uart0_rts: uart0-rts { - rockchip,pins = ; - }; + uart0_rts: uart0-rts { + rockchip,pins = ; }; + }; - uart1 { - uart1_xfer: uart1-xfer { - rockchip,pins = , - ; - }; + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = , + ; + }; - uart1_cts: uart1-cts { - rockchip,pins = ; - }; + uart1_cts: uart1-cts { + rockchip,pins = ; + }; - uart1_rts: uart1-rts { - rockchip,pins = ; - }; + uart1_rts: uart1-rts { + rockchip,pins = ; }; + }; - uart2 { - uart2_xfer: uart2-xfer { - rockchip,pins = , - ; - }; - /* no rts / cts for uart2 */ + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = , + ; }; + /* no rts / cts for uart2 */ + }; - uart3 { - uart3_xfer: uart3-xfer { - rockchip,pins = , - ; - }; + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = , + ; + }; - uart3_cts: uart3-cts { - rockchip,pins = ; - }; + uart3_cts: uart3-cts { + rockchip,pins = ; + }; - uart3_rts: uart3-rts { - rockchip,pins = ; - }; + uart3_rts: uart3-rts { + rockchip,pins = ; }; + }; - sd0 { - sd0_clk: sd0-clk { - rockchip,pins = ; - }; + sd0 { + sd0_clk: sd0-clk { + rockchip,pins = ; + }; - sd0_cmd: sd0-cmd { - rockchip,pins = ; - }; + sd0_cmd: sd0-cmd { + rockchip,pins = ; + }; - sd0_cd: sd0-cd { - rockchip,pins = ; - }; + sd0_cd: sd0-cd { + rockchip,pins = ; + }; - sd0_wp: sd0-wp { - rockchip,pins = ; - }; + sd0_wp: sd0-wp { + rockchip,pins = ; + }; - sd0_pwr: sd0-pwr { - rockchip,pins = ; - }; + sd0_pwr: sd0-pwr { + rockchip,pins = ; + }; - sd0_bus1: sd0-bus-width1 { - rockchip,pins = ; - }; + sd0_bus1: sd0-bus-width1 { + rockchip,pins = ; + }; - sd0_bus4: sd0-bus-width4 { - rockchip,pins = , - , - , - ; - }; + sd0_bus4: sd0-bus-width4 { + rockchip,pins = , + , + , + ; }; + }; - sd1 { - sd1_clk: sd1-clk { - rockchip,pins = ; - }; + sd1 { + sd1_clk: sd1-clk { + rockchip,pins = ; + }; - sd1_cmd: sd1-cmd { - rockchip,pins = ; - }; + sd1_cmd: sd1-cmd { + rockchip,pins = ; + }; - sd1_cd: sd1-cd { - rockchip,pins = ; - }; + sd1_cd: sd1-cd { + rockchip,pins = ; + }; - sd1_wp: sd1-wp { - rockchip,pins = ; - }; + sd1_wp: sd1-wp { + rockchip,pins = ; + }; - sd1_bus1: sd1-bus-width1 { - rockchip,pins = ; - }; + sd1_bus1: sd1-bus-width1 { + rockchip,pins = ; + }; - sd1_bus4: sd1-bus-width4 { - rockchip,pins = , - , - , - ; - }; + sd1_bus4: sd1-bus-width4 { + rockchip,pins = , + , + , + ; }; }; }; }; + +&global_timer { + interrupts = ; +}; + +&local_timer { + interrupts = ; +}; + +&i2c0 { + compatible = "rockchip,rk3188-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; +}; + +&i2c1 { + compatible = "rockchip,rk3188-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; +}; + +&i2c2 { + compatible = "rockchip,rk3188-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; +}; + +&i2c3 { + compatible = "rockchip,rk3188-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; +}; + +&i2c4 { + compatible = "rockchip,rk3188-i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_xfer>; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_out>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm1_out>; +}; + +&pwm2 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm2_out>; +}; + +&pwm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_out>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; +}; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>; +}; + +&wdt { + compatible = "rockchip,rk3188-wdt", "snps,dw-wdt"; +}; diff --git a/arch/arm/boot/dts/rk3288-evb-act8846.dts b/arch/arm/boot/dts/rk3288-evb-act8846.dts new file mode 100644 index 0000000000000000000000000000000000000000..7d59ff4de4087142c0cac4f7020ccdf9f91ecdda --- /dev/null +++ b/arch/arm/boot/dts/rk3288-evb-act8846.dts @@ -0,0 +1,134 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +/dts-v1/; +#include "rk3288-evb.dtsi" + +/ { + compatible = "rockchip,rk3288-evb-act8846", "rockchip,rk3288"; +}; + +&i2c0 { + hym8563@51 { + compatible = "haoyu,hym8563"; + reg = <0x51>; + + interrupt-parent = <&gpio0>; + interrupts = <4 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&hym8563_int>; + + #clock-cells = <0>; + clock-output-names = "xin32k"; + }; + + act8846: act8846@5a { + compatible = "active-semi,act8846"; + reg = <0x5a>; + status = "okay"; + + regulators { + vcc_ddr: REG1 { + regulator-name = "VCC_DDR"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vcc_io: REG2 { + regulator-name = "VCC_IO"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_log: REG3 { + regulator-name = "VDD_LOG"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_20: REG4 { + regulator-name = "VCC_20"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-always-on; + }; + + vccio_sd: REG5 { + regulator-name = "VCCIO_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd10_lcd: REG6 { + regulator-name = "VDD10_LCD"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcca_codec: REG7 { + regulator-name = "VCCA_CODEC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vcca_tp: REG8 { + regulator-name = "VCCA_TP"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vccio_pmu: REG9 { + regulator-name = "VCCIO_PMU"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_10: REG10 { + regulator-name = "VDD_10"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + vcc_18: REG11 { + regulator-name = "VCC_18"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + vcc18_lcd: REG12 { + regulator-name = "VCC18_LCD"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + }; +}; + +&pinctrl { + hym8563 { + hym8563_int: hym8563-int { + rockchip,pins = ; + }; + }; +}; diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/boot/dts/rk3288-evb-rk808.dts similarity index 52% rename from arch/arm/mach-s5p64x0/include/mach/dma.h rename to arch/arm/boot/dts/rk3288-evb-rk808.dts index 5a622af461d7b09397f7c5513e24cdc2706e2b96..9a88b6c66396b21b326441477da64a8aeb1cfb70 100644 --- a/arch/arm/mach-s5p64x0/include/mach/dma.h +++ b/arch/arm/boot/dts/rk3288-evb-rk808.dts @@ -1,7 +1,4 @@ /* - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or @@ -11,16 +8,11 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#ifndef __MACH_DMA_H -#define __MACH_DMA_H - -/* This platform uses the common common DMA API driver for PL330 */ -#include +/dts-v1/; +#include "rk3288-evb.dtsi" -#endif /* __MACH_DMA_H */ +/ { + compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; +}; diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..4f572093c8b40c9707be62a6a44e5eac675326f9 --- /dev/null +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -0,0 +1,96 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include "rk3288.dtsi" + +/ { + memory { + reg = <0x0 0x80000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + autorepeat; + + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + button@0 { + gpios = <&gpio0 5 GPIO_ACTIVE_LOW>; + linux,code = <116>; + label = "GPIO Key Power"; + linux,input-type = <1>; + gpio-key,wakeup = <1>; + debounce-interval = <100>; + }; + }; + + /* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */ + vcc_host: vcc-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio0 14 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&host_vbus_drv>; + regulator-name = "vcc_host"; + regulator-always-on; + regulator-boot-on; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&pinctrl { + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb { + host_vbus_drv: host-vbus-drv { + rockchip,pins = <0 14 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&usb_host0_ehci { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..5950b0a532242b35518bfee3f9ea97b2c962f152 --- /dev/null +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -0,0 +1,595 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include "skeleton.dtsi" + +/ { + compatible = "rockchip,rk3288"; + + interrupt-parent = <&gic>; + + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + i2c5 = &i2c5; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@500 { + device_type = "cpu"; + compatible = "arm,cortex-a12"; + reg = <0x500>; + }; + cpu@501 { + device_type = "cpu"; + compatible = "arm,cortex-a12"; + reg = <0x501>; + }; + cpu@502 { + device_type = "cpu"; + compatible = "arm,cortex-a12"; + reg = <0x502>; + }; + cpu@503 { + device_type = "cpu"; + compatible = "arm,cortex-a12"; + reg = <0x503>; + }; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "xin24m"; + #clock-cells = <0>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = , + , + , + ; + clock-frequency = <24000000>; + }; + + i2c1: i2c@ff140000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0xff140000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_xfer>; + status = "disabled"; + }; + + i2c3: i2c@ff150000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0xff150000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C3>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c3_xfer>; + status = "disabled"; + }; + + i2c4: i2c@ff160000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0xff160000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C4>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_xfer>; + status = "disabled"; + }; + + i2c5: i2c@ff170000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0xff170000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C5>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_xfer>; + status = "disabled"; + }; + + uart0: serial@ff180000 { + compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; + reg = <0xff180000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer>; + status = "disabled"; + }; + + uart1: serial@ff190000 { + compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; + reg = <0xff190000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer>; + status = "disabled"; + }; + + uart2: serial@ff690000 { + compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; + reg = <0xff690000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart2_xfer>; + status = "disabled"; + }; + + uart3: serial@ff1b0000 { + compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; + reg = <0xff1b0000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart3_xfer>; + status = "disabled"; + }; + + uart4: serial@ff1c0000 { + compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart"; + reg = <0xff1c0000 0x100>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>; + clock-names = "baudclk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&uart4_xfer>; + status = "disabled"; + }; + + usb_host0_ehci: usb@ff500000 { + compatible = "generic-ehci"; + reg = <0xff500000 0x100>; + interrupts = ; + clocks = <&cru HCLK_USBHOST0>; + clock-names = "usbhost"; + status = "disabled"; + }; + + /* NOTE: ohci@ff520000 doesn't actually work on hardware */ + + usb_hsic: usb@ff5c0000 { + compatible = "generic-ehci"; + reg = <0xff5c0000 0x100>; + interrupts = ; + clocks = <&cru HCLK_HSIC>; + clock-names = "usbhost"; + status = "disabled"; + }; + + i2c0: i2c@ff650000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0xff650000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_xfer>; + status = "disabled"; + }; + + i2c2: i2c@ff660000 { + compatible = "rockchip,rk3288-i2c"; + reg = <0xff660000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + clock-names = "i2c"; + clocks = <&cru PCLK_I2C2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_xfer>; + status = "disabled"; + }; + + pmu: power-management@ff730000 { + compatible = "rockchip,rk3288-pmu", "syscon"; + reg = <0xff730000 0x100>; + }; + + sgrf: syscon@ff740000 { + compatible = "rockchip,rk3288-sgrf", "syscon"; + reg = <0xff740000 0x1000>; + }; + + cru: clock-controller@ff760000 { + compatible = "rockchip,rk3288-cru"; + reg = <0xff760000 0x1000>; + rockchip,grf = <&grf>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + grf: syscon@ff770000 { + compatible = "rockchip,rk3288-grf", "syscon"; + reg = <0xff770000 0x1000>; + }; + + wdt: watchdog@ff800000 { + compatible = "rockchip,rk3288-wdt", "snps,dw-wdt"; + reg = <0xff800000 0x100>; + interrupts = ; + status = "disabled"; + }; + + gic: interrupt-controller@ffc01000 { + compatible = "arm,gic-400"; + interrupt-controller; + #interrupt-cells = <3>; + #address-cells = <0>; + + reg = <0xffc01000 0x1000>, + <0xffc02000 0x1000>, + <0xffc04000 0x2000>, + <0xffc06000 0x2000>; + interrupts = ; + }; + + pinctrl: pinctrl { + compatible = "rockchip,rk3288-pinctrl"; + rockchip,grf = <&grf>; + rockchip,pmu = <&pmu>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + gpio0: gpio0@ff750000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff750000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO0>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio1: gpio1@ff780000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff780000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO1>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio2: gpio2@ff790000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff790000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO2>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio3: gpio3@ff7a0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff7a0000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO3>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio4: gpio4@ff7b0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff7b0000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO4>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio5: gpio5@ff7c0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff7c0000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO5>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio6: gpio6@ff7d0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff7d0000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO6>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio7: gpio7@ff7e0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff7e0000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO7>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpio8: gpio8@ff7f0000 { + compatible = "rockchip,gpio-bank"; + reg = <0xff7f0000 0x100>; + interrupts = ; + clocks = <&cru PCLK_GPIO8>; + + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + pcfg_pull_up: pcfg-pull-up { + bias-pull-up; + }; + + pcfg_pull_down: pcfg-pull-down { + bias-pull-down; + }; + + pcfg_pull_none: pcfg-pull-none { + bias-disable; + }; + + i2c0 { + i2c0_xfer: i2c0-xfer { + rockchip,pins = <0 15 RK_FUNC_1 &pcfg_pull_none>, + <0 16 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c1 { + i2c1_xfer: i2c1-xfer { + rockchip,pins = <8 4 RK_FUNC_1 &pcfg_pull_none>, + <8 5 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c2 { + i2c2_xfer: i2c2-xfer { + rockchip,pins = <6 9 RK_FUNC_1 &pcfg_pull_none>, + <6 10 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c3 { + i2c3_xfer: i2c3-xfer { + rockchip,pins = <2 16 RK_FUNC_1 &pcfg_pull_none>, + <2 17 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c4 { + i2c4_xfer: i2c4-xfer { + rockchip,pins = <7 17 RK_FUNC_1 &pcfg_pull_none>, + <7 18 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + i2c5 { + i2c5_xfer: i2c5-xfer { + rockchip,pins = <7 19 RK_FUNC_1 &pcfg_pull_none>, + <7 20 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + sdmmc { + sdmmc_clk: sdmmc-clk { + rockchip,pins = <6 20 RK_FUNC_1 &pcfg_pull_none>; + }; + + sdmmc_cmd: sdmmc-cmd { + rockchip,pins = <6 21 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_cd: sdmcc-cd { + rockchip,pins = <6 22 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_bus1: sdmmc-bus1 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>; + }; + + sdmmc_bus4: sdmmc-bus4 { + rockchip,pins = <6 16 RK_FUNC_1 &pcfg_pull_up>, + <6 17 RK_FUNC_1 &pcfg_pull_up>, + <6 18 RK_FUNC_1 &pcfg_pull_up>, + <6 19 RK_FUNC_1 &pcfg_pull_up>; + }; + }; + + emmc { + emmc_clk: emmc-clk { + rockchip,pins = <3 18 RK_FUNC_2 &pcfg_pull_none>; + }; + + emmc_cmd: emmc-cmd { + rockchip,pins = <3 16 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_pwr: emmc-pwr { + rockchip,pins = <3 9 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_bus1: emmc-bus1 { + rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_bus4: emmc-bus4 { + rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>, + <3 1 RK_FUNC_2 &pcfg_pull_up>, + <3 2 RK_FUNC_2 &pcfg_pull_up>, + <3 3 RK_FUNC_2 &pcfg_pull_up>; + }; + + emmc_bus8: emmc-bus8 { + rockchip,pins = <3 0 RK_FUNC_2 &pcfg_pull_up>, + <3 1 RK_FUNC_2 &pcfg_pull_up>, + <3 2 RK_FUNC_2 &pcfg_pull_up>, + <3 3 RK_FUNC_2 &pcfg_pull_up>, + <3 4 RK_FUNC_2 &pcfg_pull_up>, + <3 5 RK_FUNC_2 &pcfg_pull_up>, + <3 6 RK_FUNC_2 &pcfg_pull_up>, + <3 7 RK_FUNC_2 &pcfg_pull_up>; + }; + }; + + uart0 { + uart0_xfer: uart0-xfer { + rockchip,pins = <4 16 RK_FUNC_1 &pcfg_pull_up>, + <4 17 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_cts: uart0-cts { + rockchip,pins = <4 18 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart0_rts: uart0-rts { + rockchip,pins = <4 19 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart1 { + uart1_xfer: uart1-xfer { + rockchip,pins = <5 8 RK_FUNC_1 &pcfg_pull_up>, + <5 9 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_cts: uart1-cts { + rockchip,pins = <5 10 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart1_rts: uart1-rts { + rockchip,pins = <5 11 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart2 { + uart2_xfer: uart2-xfer { + rockchip,pins = <7 22 RK_FUNC_1 &pcfg_pull_up>, + <7 23 RK_FUNC_1 &pcfg_pull_none>; + }; + /* no rts / cts for uart2 */ + }; + + uart3 { + uart3_xfer: uart3-xfer { + rockchip,pins = <7 7 RK_FUNC_1 &pcfg_pull_up>, + <7 8 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart3_cts: uart3-cts { + rockchip,pins = <7 9 RK_FUNC_1 &pcfg_pull_none>; + }; + + uart3_rts: uart3-rts { + rockchip,pins = <7 10 RK_FUNC_1 &pcfg_pull_none>; + }; + }; + + uart4 { + uart4_xfer: uart4-xfer { + rockchip,pins = <5 12 3 &pcfg_pull_up>, + <5 13 3 &pcfg_pull_none>; + }; + + uart4_cts: uart4-cts { + rockchip,pins = <5 14 3 &pcfg_pull_none>; + }; + + uart4_rts: uart4-rts { + rockchip,pins = <5 15 3 &pcfg_pull_none>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/rk3xxx.dtsi b/arch/arm/boot/dts/rk3xxx.dtsi index 2adf1cc9e85df4478c5ed329911dd613356d97f9..8caf85d839019ab1ed47690cf9bb4597de71b2f2 100644 --- a/arch/arm/boot/dts/rk3xxx.dtsi +++ b/arch/arm/boot/dts/rk3xxx.dtsi @@ -20,120 +20,248 @@ / { interrupt-parent = <&gic>; - soc { + aliases { + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2c3 = &i2c3; + i2c4 = &i2c4; + }; + + xin24m: oscillator { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + clock-output-names = "xin24m"; + }; + + L2: l2-cache-controller@10138000 { + compatible = "arm,pl310-cache"; + reg = <0x10138000 0x1000>; + cache-unified; + cache-level = <2>; + }; + + scu@1013c000 { + compatible = "arm,cortex-a9-scu"; + reg = <0x1013c000 0x100>; + }; + + global_timer: global-timer@1013c200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x1013c200 0x20>; + interrupts = ; + clocks = <&cru CORE_PERI>; + }; + + local_timer: local-timer@1013c600 { + compatible = "arm,cortex-a9-twd-timer"; + reg = <0x1013c600 0x20>; + interrupts = ; + clocks = <&cru CORE_PERI>; + }; + + gic: interrupt-controller@1013d000 { + compatible = "arm,cortex-a9-gic"; + interrupt-controller; + #interrupt-cells = <3>; + reg = <0x1013d000 0x1000>, + <0x1013c100 0x0100>; + }; + + uart0: serial@10124000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10124000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; + status = "disabled"; + }; + + uart1: serial@10126000 { + compatible = "snps,dw-apb-uart"; + reg = <0x10126000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; + status = "disabled"; + }; + + mmc0: dwmmc@10214000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x10214000 0x1000>; + interrupts = ; #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - ranges; - - scu@1013c000 { - compatible = "arm,cortex-a9-scu"; - reg = <0x1013c000 0x100>; - }; - - pmu: pmu@20004000 { - compatible = "rockchip,rk3066-pmu", "syscon"; - reg = <0x20004000 0x100>; - }; - - grf: grf@20008000 { - compatible = "syscon"; - reg = <0x20008000 0x200>; - }; - - gic: interrupt-controller@1013d000 { - compatible = "arm,cortex-a9-gic"; - interrupt-controller; - #interrupt-cells = <3>; - reg = <0x1013d000 0x1000>, - <0x1013c100 0x0100>; - }; - - L2: l2-cache-controller@10138000 { - compatible = "arm,pl310-cache"; - reg = <0x10138000 0x1000>; - cache-unified; - cache-level = <2>; - }; - - global-timer@1013c200 { - compatible = "arm,cortex-a9-global-timer"; - reg = <0x1013c200 0x20>; - interrupts = ; - clocks = <&dummy150m>; - }; - - local-timer@1013c600 { - compatible = "arm,cortex-a9-twd-timer"; - reg = <0x1013c600 0x20>; - interrupts = ; - clocks = <&dummy150m>; - }; - - uart0: serial@10124000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10124000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 8>; - status = "disabled"; - }; - - uart1: serial@10126000 { - compatible = "snps,dw-apb-uart"; - reg = <0x10126000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 10>; - status = "disabled"; - }; - - uart2: serial@20064000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20064000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 12>; - status = "disabled"; - }; - - uart3: serial@20068000 { - compatible = "snps,dw-apb-uart"; - reg = <0x20068000 0x400>; - interrupts = ; - reg-shift = <2>; - reg-io-width = <1>; - clocks = <&clk_gates1 14>; - status = "disabled"; - }; - - dwmmc@10214000 { - compatible = "rockchip,rk2928-dw-mshc"; - reg = <0x10214000 0x1000>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - - clocks = <&clk_gates5 10>, <&clk_gates2 11>; - clock-names = "biu", "ciu"; - - status = "disabled"; - }; - - dwmmc@10218000 { - compatible = "rockchip,rk2928-dw-mshc"; - reg = <0x10218000 0x1000>; - interrupts = ; - #address-cells = <1>; - #size-cells = <0>; - - clocks = <&clk_gates5 11>, <&clk_gates2 13>; - clock-names = "biu", "ciu"; - - status = "disabled"; - }; + #size-cells = <0>; + + clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + + mmc1: dwmmc@10218000 { + compatible = "rockchip,rk2928-dw-mshc"; + reg = <0x10218000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + + clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>; + clock-names = "biu", "ciu"; + + status = "disabled"; + }; + + pmu: pmu@20004000 { + compatible = "rockchip,rk3066-pmu", "syscon"; + reg = <0x20004000 0x100>; + }; + + grf: grf@20008000 { + compatible = "syscon"; + reg = <0x20008000 0x200>; + }; + + i2c0: i2c@2002d000 { + compatible = "rockchip,rk3066-i2c"; + reg = <0x2002d000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + + rockchip,grf = <&grf>; + rockchip,bus-index = <0>; + + clock-names = "i2c"; + clocks = <&cru PCLK_I2C0>; + + status = "disabled"; + }; + + i2c1: i2c@2002f000 { + compatible = "rockchip,rk3066-i2c"; + reg = <0x2002f000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + + rockchip,grf = <&grf>; + + clocks = <&cru PCLK_I2C1>; + clock-names = "i2c"; + + status = "disabled"; + }; + + pwm0: pwm@20030000 { + compatible = "rockchip,rk2928-pwm"; + reg = <0x20030000 0x10>; + #pwm-cells = <2>; + clocks = <&cru PCLK_PWM01>; + status = "disabled"; + }; + + pwm1: pwm@20030010 { + compatible = "rockchip,rk2928-pwm"; + reg = <0x20030010 0x10>; + #pwm-cells = <2>; + clocks = <&cru PCLK_PWM01>; + status = "disabled"; + }; + + wdt: watchdog@2004c000 { + compatible = "snps,dw-wdt"; + reg = <0x2004c000 0x100>; + clocks = <&cru PCLK_WDT>; + interrupts = ; + status = "disabled"; + }; + + pwm2: pwm@20050020 { + compatible = "rockchip,rk2928-pwm"; + reg = <0x20050020 0x10>; + #pwm-cells = <2>; + clocks = <&cru PCLK_PWM23>; + status = "disabled"; + }; + + pwm3: pwm@20050030 { + compatible = "rockchip,rk2928-pwm"; + reg = <0x20050030 0x10>; + #pwm-cells = <2>; + clocks = <&cru PCLK_PWM23>; + status = "disabled"; + }; + + i2c2: i2c@20056000 { + compatible = "rockchip,rk3066-i2c"; + reg = <0x20056000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + + rockchip,grf = <&grf>; + + clocks = <&cru PCLK_I2C2>; + clock-names = "i2c"; + + status = "disabled"; + }; + + i2c3: i2c@2005a000 { + compatible = "rockchip,rk3066-i2c"; + reg = <0x2005a000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + + rockchip,grf = <&grf>; + + clocks = <&cru PCLK_I2C3>; + clock-names = "i2c"; + + status = "disabled"; + }; + + i2c4: i2c@2005e000 { + compatible = "rockchip,rk3066-i2c"; + reg = <0x2005e000 0x1000>; + interrupts = ; + #address-cells = <1>; + #size-cells = <0>; + + rockchip,grf = <&grf>; + + clocks = <&cru PCLK_I2C4>; + clock-names = "i2c"; + + status = "disabled"; + }; + + uart2: serial@20064000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20064000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; + status = "disabled"; + }; + + uart3: serial@20068000 { + compatible = "snps,dw-apb-uart"; + reg = <0x20068000 0x400>; + interrupts = ; + reg-shift = <2>; + reg-io-width = <1>; + clock-names = "baudclk", "apb_pclk"; + clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/s3c2416.dtsi b/arch/arm/boot/dts/s3c2416.dtsi index 955e4a4f8c31ccb8a1bfe367d7511402e5e730e8..30b8f7e47454ebdeb274303a62073226d0ba8a5a 100644 --- a/arch/arm/boot/dts/s3c2416.dtsi +++ b/arch/arm/boot/dts/s3c2416.dtsi @@ -16,6 +16,10 @@ / { model = "Samsung S3C2416 SoC"; compatible = "samsung,s3c2416"; + aliases { + serial3 = &uart3; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -68,7 +72,7 @@ serial@50008000 { <&clocks SCLK_UART>; }; - serial@5000C000 { + uart3: serial@5000C000 { compatible = "samsung,s3c2440-uart"; reg = <0x5000C000 0x4000>; interrupts = <1 18 24 4>, <1 18 25 4>; diff --git a/arch/arm/boot/dts/s3c24xx.dtsi b/arch/arm/boot/dts/s3c24xx.dtsi index 2d1d7dc9418ae4d1d4f35a670f0388570990c34e..5ed43b857cc4ceb362d2b31426f2f7da82d73995 100644 --- a/arch/arm/boot/dts/s3c24xx.dtsi +++ b/arch/arm/boot/dts/s3c24xx.dtsi @@ -16,6 +16,9 @@ / { aliases { pinctrl0 = &pinctrl_0; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; }; intc:interrupt-controller@4a000000 { @@ -46,21 +49,21 @@ timer@51000000 { #pwm-cells = <4>; }; - serial@50000000 { + uart0: serial@50000000 { compatible = "samsung,s3c2410-uart"; reg = <0x50000000 0x4000>; interrupts = <1 28 0 4>, <1 28 1 4>; status = "disabled"; }; - serial@50004000 { + uart1: serial@50004000 { compatible = "samsung,s3c2410-uart"; reg = <0x50004000 0x4000>; interrupts = <1 23 3 4>, <1 23 4 4>; status = "disabled"; }; - serial@50008000 { + uart2: serial@50008000 { compatible = "samsung,s3c2410-uart"; reg = <0x50008000 0x4000>; interrupts = <1 15 6 4>, <1 15 7 4>; diff --git a/arch/arm/boot/dts/s3c64xx.dtsi b/arch/arm/boot/dts/s3c64xx.dtsi index 4e3be4d3493dda348284484a186ca85e5a5de7ab..ff5bdaac987af393e6640fd830c6a6a1806ef5b7 100644 --- a/arch/arm/boot/dts/s3c64xx.dtsi +++ b/arch/arm/boot/dts/s3c64xx.dtsi @@ -23,6 +23,10 @@ / { aliases { i2c0 = &i2c0; pinctrl0 = &pinctrl0; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; }; cpus { diff --git a/arch/arm/boot/dts/s5pv210-aquila.dts b/arch/arm/boot/dts/s5pv210-aquila.dts new file mode 100644 index 0000000000000000000000000000000000000000..aa31b84a707acc369fea5a8a22350a9a7a19099b --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-aquila.dts @@ -0,0 +1,392 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk + * Tomasz Figa + * + * Board device tree source for Samsung Aquila board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include +#include "s5pv210.dtsi" + +/ { + model = "Samsung Aquila based on S5PC110"; + compatible = "samsung,aquila", "samsung,s5pv210"; + + aliases { + i2c3 = &i2c_pmic; + }; + + chosen { + bootargs = "console=ttySAC2,115200n8 root=/dev/mmcblk1p5 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x18000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vtf_reg: fixed-regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + gpios = <&mp05 4 0>; + enable-active-high; + }; + + pda_reg: fixed-regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + reg = <1>; + }; + + bat_reg: fixed-regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + reg = <2>; + }; + }; + + i2c_pmic: i2c-pmic { + compatible = "i2c-gpio"; + gpios = <&gpj4 0 0>, /* sda */ + <&gpj4 3 0>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, + <&gph0 4 0>; + max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo6_reg: LDO6 { + regulator-name = "VCC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo7_reg: LDO7 { + regulator-name = "VCC_3.0V"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC+VCAM_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + regulator-boot-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_IO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_ISP_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + ldo13_reg: LDO13 { + regulator-name = "CAM_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_CIF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + ldo16_reg: LDO16 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo17_reg: LDO17 { + regulator-name = "CAM_8M_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VARM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck2_reg: BUCK2 { + regulator-name = "VINT_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + vichg_reg: ENVICHG { + regulator-name = "VICHG"; + }; + + safeout1_reg: ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + regulator-always-on; + }; + + safeout2_reg: ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gph2 6 1>; + linux,code = ; + label = "power"; + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <1>; + linux,code = ; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <2>; + linux,code = ; + }; + + key_3 { + keypad,row = <1>; + keypad,column = <1>; + linux,code = ; + }; + + key_4 { + keypad,row = <1>; + keypad,column = <2>; + linux,code = ; + }; + + key_5 { + keypad,row = <2>; + keypad,column = <1>; + linux,code = ; + }; + + key_6 { + keypad,row = <2>; + keypad,column = <2>; + linux,code = ; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + non-removable; + status = "okay"; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4>; + pinctrl-names = "default"; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 1>; + vmmc-supply = <&vtf_reg>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4 &t_flash_detect>; + pinctrl-names = "default"; + status = "okay"; +}; + +&onenand { + status = "okay"; +}; + +&hsotg { + vusb_a-supply = <&ldo3_reg>; + vusb_d-supply = <&ldo8_reg>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24 &pwm1_out>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + clock-frequency = <0>; + hactive = <800>; + vactive = <480>; + hfront-porch = <16>; + hback-porch = <16>; + hsync-len = <2>; + vback-porch = <3>; + vfront-porch = <28>; + vsync-len = <1>; + }; + }; +}; + +&pinctrl0 { + t_flash_detect: t-flash-detect { + samsung,pins = "gph3-4"; + samsung,pin-function = <0>; + samsung,pin-pud = <0>; + }; +}; diff --git a/arch/arm/boot/dts/s5pv210-goni.dts b/arch/arm/boot/dts/s5pv210-goni.dts new file mode 100644 index 0000000000000000000000000000000000000000..6387c77a6f7bd1c8ec8c04be46dcb6b1d0edd67e --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-goni.dts @@ -0,0 +1,449 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk + * Tomasz Figa + * + * Board device tree source for Samsung Goni board. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include +#include "s5pv210.dtsi" + +/ { + model = "Samsung Goni based on S5PC110"; + compatible = "samsung,goni", "samsung,s5pv210"; + + aliases { + i2c3 = &i2c_pmic; + }; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x30000000 0x05000000 + 0x40000000 0x10000000 + 0x50000000 0x08000000>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vtf_reg: fixed-regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "V_TF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + reg = <0>; + gpios = <&mp05 4 0>; + enable-active-high; + }; + + pda_reg: fixed-regulator@1 { + compatible = "regulator-fixed"; + regulator-name = "VCC_1.8V_PDA"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + reg = <1>; + }; + + bat_reg: fixed-regulator@2 { + compatible = "regulator-fixed"; + regulator-name = "V_BAT"; + regulator-min-microvolt = <3700000>; + regulator-max-microvolt = <3700000>; + reg = <2>; + }; + + tsp_reg: fixed-regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "TSP_VDD"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + reg = <3>; + gpios = <&gpj1 3 0>; + enable-active-high; + }; + }; + + i2c_pmic: i2c-pmic { + compatible = "i2c-gpio"; + gpios = <&gpj4 0 0>, /* sda */ + <&gpj4 3 0>; /* scl */ + i2c-gpio,delay-us = <2>; /* ~100 kHz */ + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>, + <&gph0 4 0>; + max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>, + <1200000>, <1200000>; + + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>; + + regulators { + ldo2_reg: LDO2 { + regulator-name = "VALIVE_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo3_reg: LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + ldo4_reg: LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo5_reg: LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo6_reg: LDO6 { + regulator-name = "VCC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo7_reg: LDO7 { + regulator-name = "VLCD_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + ldo8_reg: LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo9_reg: LDO9 { + regulator-name = "VCC+VCAM_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10_reg: LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + }; + + ldo11_reg: LDO11 { + regulator-name = "CAM_IO_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo12_reg: LDO12 { + regulator-name = "CAM_ISP_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo13_reg: LDO13 { + regulator-name = "CAM_A_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo14_reg: LDO14 { + regulator-name = "CAM_CIF_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo15_reg: LDO15 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + ldo16_reg: LDO16 { + regulator-name = "VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo17_reg: LDO17 { + regulator-name = "CAM_8M_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck1_reg: BUCK1 { + regulator-name = "VARM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + buck2_reg: BUCK2 { + regulator-name = "VINT_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + buck3_reg: BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + buck4_reg: BUCK4 { + regulator-name = "CAM_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + }; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&gph2 6 1>; + linux,code = ; + label = "power"; + debounce-interval = <1>; + gpio-key,wakeup; + }; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <3>; + samsung,keypad-num-columns = <3>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <1>; + linux,code = ; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <2>; + linux,code = ; + }; + + key_3 { + keypad,row = <1>; + keypad,column = <1>; + linux,code = ; + }; + + key_4 { + keypad,row = <1>; + keypad,column = <2>; + linux,code = ; + }; + + key_5 { + keypad,row = <2>; + keypad,column = <1>; + linux,code = ; + }; + + key_6 { + keypad,row = <2>; + keypad,column = <2>; + linux,code = ; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + non-removable; + vmmc-supply = <&ldo5_reg>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + cd-gpios = <&gph3 4 1>; + vmmc-supply = <&vtf_reg>; + cd-inverted; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hsotg { + vusb_a-supply = <&ldo3_reg>; + vusb_d-supply = <&ldo8_reg>; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&i2c2 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <400000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + tsp@4a { + compatible = "atmel,maxtouch"; + reg = <0x4a>; + interrupt-parent = <&gpj0>; + interrupts = <5 2>; + + atmel,x-line = <17>; + atmel,y-line = <11>; + atmel,x-size = <800>; + atmel,y-size = <480>; + atmel,burst-length = <0x21>; + atmel,threshold = <0x28>; + atmel,orientation = <1>; + + vdd-supply = <&tsp_reg>; + }; +}; + +&i2c0 { + samsung,i2c-sda-delay = <100>; + samsung,i2c-max-bus-freq = <100000>; + samsung,i2c-slave-addr = <0x10>; + status = "okay"; + + noon010pc30: sensor@30 { + compatible = "siliconfile,noon010pc30"; + reg = <0x30>; + vddio-supply = <&ldo11_reg>; + vdda-supply = <&ldo13_reg>; + vdd_core-supply = <&ldo14_reg>; + + clock-frequency = <16000000>; + clocks = <&clock_cam 0>; + clock-names = "mclk"; + nreset-gpios = <&gpb 2 0>; + nstby-gpios = <&gpb 0 0>; + + port { + noon010pc30_ep: endpoint { + remote-endpoint = <&fimc0_ep>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <1>; + pclk-sample = <1>; + }; + }; + }; +}; + +&camera { + pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>; + pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>; + pinctrl-names = "default", "idle"; + + parallel-ports { + #address-cells = <1>; + #size-cells = <0>; + + /* camera A input */ + port@1 { + reg = <1>; + fimc0_ep: endpoint { + remote-endpoint = <&noon010pc30_ep>; + bus-width = <8>; + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + }; + }; + }; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + timing0: timing { + /* 480x800@55Hz */ + clock-frequency = <23439570>; + hactive = <480>; + hfront-porch = <16>; + hback-porch = <16>; + hsync-len = <2>; + vactive = <800>; + vback-porch = <2>; + vfront-porch = <28>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <0>; + pixelclk-active = <0>; + }; + }; +}; + +&onenand { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-pinctrl.dtsi b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..8c714088e3c635e93afc1bb32ff79a59b418589b --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-pinctrl.dtsi @@ -0,0 +1,839 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk + * Tomasz Figa + * + * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +&pinctrl0 { + gpa0: gpa0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpa1: gpa1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpb: gpb { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc0: gpc0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpc1: gpc1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd0: gpd0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpd1: gpd1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe0: gpe0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpe1: gpe1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf0: gpf0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf1: gpf1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf2: gpf2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpf3: gpf3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg0: gpg0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg1: gpg1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg2: gpg2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpg3: gpg3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj0: gpj0 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj1: gpj1 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj2: gpj2 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj3: gpj3 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpj4: gpj4 { + gpio-controller; + #gpio-cells = <2>; + + interrupt-controller; + #interrupt-cells = <2>; + }; + + gpgi: gpgi { + gpio-controller; + #gpio-cells = <2>; + }; + + mp01: mp01 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp02: mp02 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp03: mp03 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp04: mp04 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp05: mp05 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp06: mp06 { + gpio-controller; + #gpio-cells = <2>; + }; + + mp07: mp07 { + gpio-controller; + #gpio-cells = <2>; + }; + + gph0: gph0 { + gpio-controller; + interrupt-controller; + interrupt-parent = <&vic0>; + interrupts = <0>, <1>, <2>, <3>, + <4>, <5>, <6>, <7>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gph1: gph1 { + gpio-controller; + interrupt-controller; + interrupt-parent = <&vic0>; + interrupts = <8>, <9>, <10>, <11>, + <12>, <13>, <14>, <15>; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gph2: gph2 { + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + gph3: gph3 { + gpio-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + }; + + uart0_data: uart0-data { + samsung,pins = "gpa0-0", "gpa0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart0_fctl: uart0-fctl { + samsung,pins = "gpa0-2", "gpa0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_data: uart1-data { + samsung,pins = "gpa0-4", "gpa0-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart1_fctl: uart1-fctl { + samsung,pins = "gpa0-6", "gpa0-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_data: uart2-data { + samsung,pins = "gpa1-0", "gpa1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart2_fctl: uart2-fctl { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart3_data: uart3-data { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + uart_audio: uart-audio { + samsung,pins = "gpa1-2", "gpa1-3"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi0_bus: spi0-bus { + samsung,pins = "gpb-0", "gpb-2", "gpb-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + spi1_bus: spi1-bus { + samsung,pins = "gpb-4", "gpb-6", "gpb-7"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2s0_bus: i2s0-bus { + samsung,pins = "gpi-0", "gpi-1", "gpi-2", "gpi-3", + "gpi-4", "gpi-5", "gpi-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s1_bus: i2s1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm1_bus: pcm1-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + ac97_bus: ac97-bus { + samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3", + "gpc0-4"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + i2s2_bus: i2s2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pcm2_bus: pcm2-bus { + samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3", + "gpc1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spdif_bus: spdif-bus { + samsung,pins = "gpc1-0", "gpc1-1"; + samsung,pin-function = <4>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + spi2_bus: spi2-bus { + samsung,pins = "gpc1-1", "gpc1-2", "gpc1-3", "gpc1-4"; + samsung,pin-function = <5>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2c0_bus: i2c0-bus { + samsung,pins = "gpd1-0", "gpd1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2c1_bus: i2c1-bus { + samsung,pins = "gpd1-2", "gpd1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + i2c2_bus: i2c2-bus { + samsung,pins = "gpd1-4", "gpd1-5"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <0>; + }; + + pwm0_out: pwm0-out { + samsung,pins = "gpd0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm1_out: pwm1-out { + samsung,pins = "gpd0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm2_out: pwm2-out { + samsung,pins = "gpd0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + pwm3_out: pwm3-out { + samsung,pins = "gpd0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row0: keypad-row-0 { + samsung,pins = "gph3-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row1: keypad-row-1 { + samsung,pins = "gph3-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row2: keypad-row-2 { + samsung,pins = "gph3-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row3: keypad-row-3 { + samsung,pins = "gph3-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row4: keypad-row-4 { + samsung,pins = "gph3-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row5: keypad-row-5 { + samsung,pins = "gph3-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row6: keypad-row-6 { + samsung,pins = "gph3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_row7: keypad-row-7 { + samsung,pins = "gph3-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col0: keypad-col-0 { + samsung,pins = "gph2-0"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col1: keypad-col-1 { + samsung,pins = "gph2-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col2: keypad-col-2 { + samsung,pins = "gph2-2"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col3: keypad-col-3 { + samsung,pins = "gph2-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col4: keypad-col-4 { + samsung,pins = "gph2-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col5: keypad-col-5 { + samsung,pins = "gph2-5"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col6: keypad-col-6 { + samsung,pins = "gph2-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + keypad_col7: keypad-col-7 { + samsung,pins = "gph2-7"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + sd0_clk: sd0-clk { + samsung,pins = "gpg0-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cmd: sd0-cmd { + samsung,pins = "gpg0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd0_cd: sd0-cd { + samsung,pins = "gpg0-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd0_bus1: sd0-bus-width1 { + samsung,pins = "gpg0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd0_bus4: sd0-bus-width4 { + samsung,pins = "gpg0-3", "gpg0-4", "gpg0-5", "gpg0-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd0_bus8: sd0-bus-width8 { + samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd1_clk: sd1-clk { + samsung,pins = "gpg1-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cmd: sd1-cmd { + samsung,pins = "gpg1-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd1_cd: sd1-cd { + samsung,pins = "gpg1-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd1_bus1: sd1-bus-width1 { + samsung,pins = "gpg1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd1_bus4: sd1-bus-width4 { + samsung,pins = "gpg1-3", "gpg1-4", "gpg1-5", "gpg1-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_clk: sd2-clk { + samsung,pins = "gpg2-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cmd: sd2-cmd { + samsung,pins = "gpg2-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd2_cd: sd2-cd { + samsung,pins = "gpg2-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_bus1: sd2-bus-width1 { + samsung,pins = "gpg2-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_bus4: sd2-bus-width4 { + samsung,pins = "gpg2-3", "gpg2-4", "gpg2-5", "gpg2-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd2_bus8: sd2-bus-width8 { + samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6"; + samsung,pin-function = <3>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd3_clk: sd3-clk { + samsung,pins = "gpg3-0"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cmd: sd3-cmd { + samsung,pins = "gpg3-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + sd3_cd: sd3-cd { + samsung,pins = "gpg3-2"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd3_bus1: sd3-bus-width1 { + samsung,pins = "gpg3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + sd3_bus4: sd3-bus-width4 { + samsung,pins = "gpg3-3", "gpg3-4", "gpg3-5", "gpg3-6"; + samsung,pin-function = <2>; + samsung,pin-pud = <2>; + samsung,pin-drv = <3>; + }; + + eint0: ext-int0 { + samsung,pins = "gph0-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint8: ext-int8 { + samsung,pins = "gph1-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint15: ext-int15 { + samsung,pins = "gph1-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint16: ext-int16 { + samsung,pins = "gph2-0"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + eint31: ext-int31 { + samsung,pins = "gph3-7"; + samsung,pin-function = <0xf>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a_io: cam-port-a-io { + samsung,pins = "gpe0-0", "gpe0-1", "gpe0-2", "gpe0-3", + "gpe0-4", "gpe0-5", "gpe0-6", "gpe0-7", + "gpe1-0", "gpe1-1", "gpe1-2", "gpe1-4"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_a_clk_active: cam-port-a-clk-active { + samsung,pins = "gpe1-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_a_clk_idle: cam-port-a-clk-idle { + samsung,pins = "gpe1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + cam_port_b_io: cam-port-b-io { + samsung,pins = "gpj0-0", "gpj0-1", "gpj0-2", "gpj0-3", + "gpj0-4", "gpj0-5", "gpj0-6", "gpj0-7", + "gpj1-0", "gpj1-1", "gpj1-2", "gpj1-4"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + cam_port_b_clk_active: cam-port-b-clk-active { + samsung,pins = "gpj1-3"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <3>; + }; + + cam_port_b_clk_idle: cam-port-b-clk-idle { + samsung,pins = "gpj1-3"; + samsung,pin-function = <0>; + samsung,pin-pud = <1>; + samsung,pin-drv = <0>; + }; + + lcd_ctrl: lcd-ctrl { + samsung,pins = "gpd0-0", "gpd0-1"; + samsung,pin-function = <3>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_sync: lcd-sync { + samsung,pins = "gpf0-0", "gpf0-1"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_clk: lcd-clk { + samsung,pins = "gpf0-0", "gpf0-1", "gpf0-2", "gpf0-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; + + lcd_data24: lcd-data-width24 { + samsung,pins = "gpf0-4", "gpf0-5", "gpf0-6", "gpf0-7", + "gpf1-0", "gpf1-1", "gpf1-2", "gpf1-3", + "gpf1-4", "gpf1-5", "gpf1-6", "gpf1-7", + "gpf2-0", "gpf2-1", "gpf2-2", "gpf2-3", + "gpf2-4", "gpf2-5", "gpf2-6", "gpf2-7", + "gpf3-0", "gpf3-1", "gpf3-2", "gpf3-3"; + samsung,pin-function = <2>; + samsung,pin-pud = <0>; + samsung,pin-drv = <0>; + }; +}; diff --git a/arch/arm/boot/dts/s5pv210-smdkc110.dts b/arch/arm/boot/dts/s5pv210-smdkc110.dts new file mode 100644 index 0000000000000000000000000000000000000000..1eedab7ffe94c199d83a362eb91dea6a657bb2ff --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-smdkc110.dts @@ -0,0 +1,78 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk + * Tomasz Figa + * + * Board device tree source for YIC System SMDC110 board. + * + * NOTE: This file is completely based on original board file for mach-smdkc110 + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include +#include "s5pv210.dtsi" + +/ { + model = "YIC System SMDKC110 based on S5PC110"; + compatible = "yic,smdkc110", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x20000000>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + audio-codec@1b { + compatible = "wlf,wm8580"; + reg = <0x1b>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-smdkv210.dts b/arch/arm/boot/dts/s5pv210-smdkv210.dts new file mode 100644 index 0000000000000000000000000000000000000000..cb8521899ec8478fd2303a49d7210e8053388add --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-smdkv210.dts @@ -0,0 +1,238 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk + * Tomasz Figa + * + * Board device tree source for YIC System SMDV210 board. + * + * NOTE: This file is completely based on original board file for mach-smdkv210 + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include +#include "s5pv210.dtsi" + +/ { + model = "YIC System SMDKV210 based on S5PV210"; + compatible = "yic,smdkv210", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x40000000>; + }; + + ethernet@18000000 { + compatible = "davicom,dm9000"; + reg = <0xA8000000 0x2 0xA8000002 0x2>; + interrupt-parent = <&gph1>; + interrupts = <1 4>; + local-mac-address = [00 00 de ad be ef]; + davicom,no-eeprom; + }; + + backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 3 5000000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&pwm3_out>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&keypad { + linux,input-no-autorepeat; + linux,input-wakeup; + samsung,keypad-num-rows = <8>; + samsung,keypad-num-columns = <8>; + pinctrl-names = "default"; + pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>, + <&keypad_row3>, <&keypad_row4>, <&keypad_row5>, + <&keypad_row6>, <&keypad_row7>, + <&keypad_col0>, <&keypad_col1>, <&keypad_col2>, + <&keypad_col3>, <&keypad_col4>, <&keypad_col5>, + <&keypad_col6>, <&keypad_col7>; + status = "okay"; + + key_1 { + keypad,row = <0>; + keypad,column = <3>; + linux,code = ; + }; + + key_2 { + keypad,row = <0>; + keypad,column = <4>; + linux,code = ; + }; + + key_3 { + keypad,row = <0>; + keypad,column = <5>; + linux,code = ; + }; + + key_4 { + keypad,row = <0>; + keypad,column = <6>; + linux,code = ; + }; + + key_5 { + keypad,row = <0 + >; + keypad,column = <7>; + linux,code = ; + }; + + key_6 { + keypad,row = <1>; + keypad,column = <3>; + linux,code = ; + }; + key_7 { + keypad,row = <1>; + keypad,column = <4>; + linux,code = ; + }; + + key_8 { + keypad,row = <1>; + keypad,column = <5>; + linux,code = ; + }; + + key_9 { + keypad,row = <1>; + keypad,column = <6>; + linux,code = ; + }; + + key_10 { + keypad,row = <1>; + keypad,column = <7>; + linux,code = ; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci1 { + bus-width = <4>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus1 &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci3 { + bus-width = <4>; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&hsotg { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&fimd { + pinctrl-0 = <&lcd_clk &lcd_data24>; + pinctrl-names = "default"; + status = "okay"; + + display-timings { + native-mode = <&timing0>; + + timing0: timing@0 { + /* 800x480@60Hz */ + clock-frequency = <24373920>; + hactive = <800>; + vactive = <480>; + hfront-porch = <8>; + hback-porch = <13>; + hsync-len = <3>; + vback-porch = <7>; + vfront-porch = <5>; + vsync-len = <1>; + hsync-active = <0>; + vsync-active = <0>; + de-active = <1>; + pixelclk-active = <1>; + }; + }; +}; + +&pwm { + samsung,pwm-outputs = <3>; +}; + +&i2c0 { + status = "okay"; + + audio-codec@1b { + compatible = "wlf,wm8580"; + reg = <0x1b>; + }; + + eeprom@50 { + compatible = "atmel,24c08"; + reg = <0x50>; + }; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210-torbreck.dts b/arch/arm/boot/dts/s5pv210-torbreck.dts new file mode 100644 index 0000000000000000000000000000000000000000..622599fd2cfaffa80d0bb971a9cde1a212a0ffc6 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210-torbreck.dts @@ -0,0 +1,92 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk + * Tomasz Figa + * + * Board device tree source for Torbreck board. + * + * NOTE: This file is completely based on original board file for mach-torbreck + * available in Linux 3.15 and intends to provide equivalent level of hardware + * support. Due to lack of hardware, _no_ testing has been performed. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/dts-v1/; +#include +#include "s5pv210.dtsi" + +/ { + model = "aESOP Torbreck based on S5PV210"; + compatible = "aesop,torbreck", "samsung,s5pv210"; + + chosen { + bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p1 rw rootwait ignore_loglevel earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0x20000000 0x20000000>; + }; +}; + +&xusbxti { + clock-frequency = <24000000>; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart3 { + status = "okay"; +}; + +&rtc { + status = "okay"; +}; + +&sdhci0 { + bus-width = <4>; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci1 { + bus-width = <4>; + pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus1 &sd1_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci2 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus1 &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&sdhci3 { + bus-width = <4>; + pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_cd &sd3_bus1 &sd3_bus4>; + pinctrl-names = "default"; + status = "okay"; +}; + +&i2s0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/s5pv210.dtsi b/arch/arm/boot/dts/s5pv210.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..8344a0ee2b86f554d4d674522fc0403d4edfb310 --- /dev/null +++ b/arch/arm/boot/dts/s5pv210.dtsi @@ -0,0 +1,633 @@ +/* + * Samsung's S5PV210 SoC device tree source + * + * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd. + * + * Mateusz Krawczuk + * Tomasz Figa + * + * Samsung's S5PV210 SoC device nodes are listed in this file. S5PV210 + * based board files can include this file and provide values for board specfic + * bindings. + * + * Note: This file does not include device nodes for all the controllers in + * S5PV210 SoC. As device tree coverage for S5PV210 increases, additional + * nodes can be added to this file. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include "skeleton.dtsi" +#include +#include + +/ { + aliases { + csis0 = &csis0; + fimc0 = &fimc0; + fimc1 = &fimc1; + fimc2 = &fimc2; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; + i2s0 = &i2s0; + i2s1 = &i2s1; + i2s2 = &i2s2; + pinctrl0 = &pinctrl0; + spi0 = &spi0; + spi1 = &spi1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a8"; + reg = <0>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + external-clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + xxti: oscillator@0 { + compatible = "fixed-clock"; + reg = <0>; + clock-frequency = <0>; + clock-output-names = "xxti"; + #clock-cells = <0>; + }; + + xusbxti: oscillator@1 { + compatible = "fixed-clock"; + reg = <1>; + clock-frequency = <0>; + clock-output-names = "xusbxti"; + #clock-cells = <0>; + }; + }; + + onenand: onenand@b0000000 { + compatible = "samsung,s5pv210-onenand"; + reg = <0xb0600000 0x2000>, + <0xb0000000 0x20000>, + <0xb0040000 0x20000>; + interrupt-parent = <&vic1>; + interrupts = <31>; + clocks = <&clocks CLK_NANDXL>, <&clocks DOUT_FLASH>; + clock-names = "bus", "onenand"; + #address-cells = <1>; + #size-cells = <1>; + status = "disabled"; + }; + + chipid@e0000000 { + compatible = "samsung,s5pv210-chipid"; + reg = <0xe0000000 0x1000>; + }; + + clocks: clock-controller@e0100000 { + compatible = "samsung,s5pv210-clock", "simple-bus"; + reg = <0xe0100000 0x10000>; + clock-names = "xxti", "xusbxti"; + clocks = <&xxti>, <&xusbxti>; + #clock-cells = <1>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + pmu_syscon: syscon@e0108000 { + compatible = "samsung-s5pv210-pmu", "syscon"; + reg = <0xe0108000 0x8000>; + }; + }; + + pinctrl0: pinctrl@e0200000 { + compatible = "samsung,s5pv210-pinctrl"; + reg = <0xe0200000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <30>; + + wakeup-interrupt-controller { + compatible = "samsung,exynos4210-wakeup-eint"; + interrupts = <16>; + interrupt-parent = <&vic0>; + }; + }; + + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + ranges; + + pdma0: dma@e0900000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0900000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <19>; + clocks = <&clocks CLK_PDMA0>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: dma@e0a00000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xe0a00000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <20>; + clocks = <&clocks CLK_PDMA1>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + }; + + spi0: spi@e1300000 { + compatible = "samsung,s5pv210-spi"; + reg = <0xe1300000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <15>; + dmas = <&pdma0 7>, <&pdma0 6>; + dma-names = "tx", "rx"; + clocks = <&clocks SCLK_SPI0>, <&clocks CLK_SPI0>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + spi1: spi@e1400000 { + compatible = "samsung,s5pv210-spi"; + reg = <0xe1400000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <16>; + dmas = <&pdma1 7>, <&pdma1 6>; + dma-names = "tx", "rx"; + clocks = <&clocks SCLK_SPI1>, <&clocks CLK_SPI1>; + clock-names = "spi", "spi_busclk0"; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + keypad: keypad@e1600000 { + compatible = "samsung,s5pv210-keypad"; + reg = <0xe1600000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <25>; + clocks = <&clocks CLK_KEYIF>; + clock-names = "keypad"; + status = "disabled"; + }; + + i2c0: i2c@e1800000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xe1800000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <14>; + clocks = <&clocks CLK_I2C0>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e1a00000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xe1a00000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <19>; + clocks = <&clocks CLK_I2C2>; + clock-names = "i2c"; + pinctrl-0 = <&i2c2_bus>; + pinctrl-names = "default"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + audio-subsystem { + compatible = "samsung,s5pv210-audss", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clk_audss: clock-controller@eee10000 { + compatible = "samsung,s5pv210-audss-clock"; + reg = <0xeee10000 0x1000>; + clock-names = "hclk", "xxti", + "fout_epll", + "sclk_audio0"; + clocks = <&clocks DOUT_HCLKP>, <&xxti>, + <&clocks FOUT_EPLL>, + <&clocks SCLK_AUDIO0>; + #clock-cells = <1>; + }; + + i2s0: i2s@eee30000 { + compatible = "samsung,s5pv210-i2s"; + reg = <0xeee30000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <16>; + dma-names = "rx", "tx", "tx-sec"; + dmas = <&pdma1 9>, <&pdma1 10>, <&pdma1 11>; + clock-names = "iis", + "i2s_opclk0", + "i2s_opclk1"; + clocks = <&clk_audss CLK_I2S>, + <&clk_audss CLK_I2S>, + <&clk_audss CLK_DOUT_AUD_BUS>; + samsung,idma-addr = <0xc0010000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s0_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + }; + + i2s1: i2s@e2100000 { + compatible = "samsung,s3c6410-i2s"; + reg = <0xe2100000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <17>; + dma-names = "rx", "tx"; + dmas = <&pdma1 12>, <&pdma1 13>; + clock-names = "iis", "i2s_opclk0"; + clocks = <&clocks CLK_I2S1>, <&clocks SCLK_AUDIO1>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s1_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + i2s2: i2s@e2a00000 { + compatible = "samsung,s3c6410-i2s"; + reg = <0xe2a00000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <18>; + dma-names = "rx", "tx"; + dmas = <&pdma1 14>, <&pdma1 15>; + clock-names = "iis", "i2s_opclk0"; + clocks = <&clocks CLK_I2S2>, <&clocks SCLK_AUDIO2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s2_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + pwm: pwm@e2500000 { + compatible = "samsung,s5pc100-pwm"; + reg = <0xe2500000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <21>, <22>, <23>, <24>, <25>; + clock-names = "timers"; + clocks = <&clocks CLK_PWM>; + #pwm-cells = <3>; + }; + + watchdog: watchdog@e2700000 { + compatible = "samsung,s3c2410-wdt"; + reg = <0xe2700000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <26>; + clock-names = "watchdog"; + clocks = <&clocks CLK_WDT>; + }; + + rtc: rtc@e2800000 { + compatible = "samsung,s3c6410-rtc"; + reg = <0xe2800000 0x100>; + interrupt-parent = <&vic0>; + interrupts = <28>, <29>; + clocks = <&clocks CLK_RTC>; + clock-names = "rtc"; + status = "disabled"; + }; + + uart0: serial@e2900000 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900000 0x400>; + interrupt-parent = <&vic1>; + interrupts = <10>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART0>, <&clocks CLK_UART0>, + <&clocks SCLK_UART0>; + status = "disabled"; + }; + + uart1: serial@e2900400 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900400 0x400>; + interrupt-parent = <&vic1>; + interrupts = <11>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART1>, <&clocks CLK_UART1>, + <&clocks SCLK_UART1>; + status = "disabled"; + }; + + uart2: serial@e2900800 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900800 0x400>; + interrupt-parent = <&vic1>; + interrupts = <12>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART2>, <&clocks CLK_UART2>, + <&clocks SCLK_UART2>; + status = "disabled"; + }; + + uart3: serial@e2900c00 { + compatible = "samsung,s5pv210-uart"; + reg = <0xe2900c00 0x400>; + interrupt-parent = <&vic1>; + interrupts = <13>; + clock-names = "uart", "clk_uart_baud0", + "clk_uart_baud1"; + clocks = <&clocks CLK_UART3>, <&clocks CLK_UART3>, + <&clocks SCLK_UART3>; + status = "disabled"; + }; + + sdhci0: sdhci@eb000000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb000000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <26>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC0>, <&clocks CLK_HSMMC0>, + <&clocks SCLK_MMC0>; + status = "disabled"; + }; + + sdhci1: sdhci@eb100000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb100000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <27>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC1>, <&clocks CLK_HSMMC1>, + <&clocks SCLK_MMC1>; + status = "disabled"; + }; + + sdhci2: sdhci@eb200000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb200000 0x100000>; + interrupt-parent = <&vic1>; + interrupts = <28>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.2"; + clocks = <&clocks CLK_HSMMC2>, <&clocks CLK_HSMMC2>, + <&clocks SCLK_MMC2>; + status = "disabled"; + }; + + sdhci3: sdhci@eb300000 { + compatible = "samsung,s3c6410-sdhci"; + reg = <0xeb300000 0x100000>; + interrupt-parent = <&vic3>; + interrupts = <2>; + clock-names = "hsmmc", "mmc_busclk.0", "mmc_busclk.3"; + clocks = <&clocks CLK_HSMMC3>, <&clocks CLK_HSMMC3>, + <&clocks SCLK_MMC3>; + status = "disabled"; + }; + + hsotg: hsotg@ec000000 { + compatible = "samsung,s3c6400-hsotg"; + reg = <0xec000000 0x20000>; + interrupt-parent = <&vic1>; + interrupts = <24>; + clocks = <&clocks CLK_USB_OTG>; + clock-names = "otg"; + phy-names = "usb2-phy"; + phys = <&usbphy 0>; + status = "disabled"; + }; + + usbphy: usbphy@ec100000 { + compatible = "samsung,s5pv210-usb2-phy"; + reg = <0xec100000 0x100>; + samsung,pmureg-phandle = <&pmu_syscon>; + clocks = <&clocks CLK_USB_OTG>, <&xusbxti>; + clock-names = "phy", "ref"; + #phy-cells = <1>; + status = "disabled"; + }; + + ehci: ehci@ec200000 { + compatible = "samsung,exynos4210-ehci"; + reg = <0xec200000 0x100>; + interrupts = <23>; + interrupt-parent = <&vic1>; + clocks = <&clocks CLK_USB_HOST>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + phys = <&usbphy 1>; + }; + }; + + ohci: ohci@ec300000 { + compatible = "samsung,exynos4210-ohci"; + reg = <0xec300000 0x100>; + interrupts = <23>; + clocks = <&clocks CLK_USB_HOST>; + clock-names = "usbhost"; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + port@0 { + reg = <0>; + phys = <&usbphy 1>; + }; + }; + + mfc: codec@f1700000 { + compatible = "samsung,mfc-v5"; + reg = <0xf1700000 0x10000>; + interrupt-parent = <&vic2>; + interrupts = <14>; + clocks = <&clocks DOUT_MFC>, <&clocks CLK_MFC>; + clock-names = "sclk_mfc", "mfc"; + }; + + vic0: interrupt-controller@f2000000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2000000 0x1000>; + #interrupt-cells = <1>; + }; + + vic1: interrupt-controller@f2100000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2100000 0x1000>; + #interrupt-cells = <1>; + }; + + vic2: interrupt-controller@f2200000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2200000 0x1000>; + #interrupt-cells = <1>; + }; + + vic3: interrupt-controller@f2300000 { + compatible = "arm,pl192-vic"; + interrupt-controller; + reg = <0xf2300000 0x1000>; + #interrupt-cells = <1>; + }; + + fimd: fimd@f8000000 { + compatible = "samsung,exynos4210-fimd"; + interrupt-parent = <&vic2>; + reg = <0xf8000000 0x20000>; + interrupt-names = "fifo", "vsync", "lcd_sys"; + interrupts = <0>, <1>, <2>; + clocks = <&clocks SCLK_FIMD>, <&clocks CLK_FIMD>; + clock-names = "sclk_fimd", "fimd"; + status = "disabled"; + }; + + g2d: g2d@fa000000 { + compatible = "samsung,s5pv210-g2d"; + reg = <0xfa000000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <9>; + clocks = <&clocks DOUT_G2D>, <&clocks CLK_G2D>; + clock-names = "sclk_fimg2d", "fimg2d"; + }; + + mdma1: mdma@fa200000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xfa200000 0x1000>; + interrupt-parent = <&vic0>; + interrupts = <18>; + clocks = <&clocks CLK_MDMA>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + i2c1: i2c@fab00000 { + compatible = "samsung,s3c2440-i2c"; + reg = <0xfab00000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <13>; + clocks = <&clocks CLK_I2C1>; + clock-names = "i2c"; + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_bus>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + camera: camera { + compatible = "samsung,fimc", "simple-bus"; + pinctrl-names = "default"; + pinctrl-0 = <>; + clocks = <&clocks SCLK_CAM0>, <&clocks SCLK_CAM1>; + clock-names = "sclk_cam0", "sclk_cam1"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + clock_cam: clock-controller { + #clock-cells = <1>; + }; + + csis0: csis@fa600000 { + compatible = "samsung,s5pv210-csis"; + reg = <0xfa600000 0x4000>; + interrupt-parent = <&vic2>; + interrupts = <29>; + clocks = <&clocks CLK_CSIS>, + <&clocks SCLK_CSIS>; + clock-names = "clk_csis", + "sclk_csis"; + bus-width = <4>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + fimc0: fimc@fb200000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb200000 0x1000>; + interrupts = <5>; + interrupt-parent = <&vic2>; + clocks = <&clocks CLK_FIMC0>, + <&clocks SCLK_FIMC0>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc1: fimc@fb300000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb300000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <6>; + clocks = <&clocks CLK_FIMC1>, + <&clocks SCLK_FIMC1>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,cam-if; + }; + + fimc2: fimc@fb400000 { + compatible = "samsung,s5pv210-fimc"; + reg = <0xfb400000 0x1000>; + interrupt-parent = <&vic2>; + interrupts = <7>; + clocks = <&clocks CLK_FIMC2>, + <&clocks SCLK_FIMC2>; + clock-names = "fimc", + "sclk_fimc"; + samsung,pix-limits = <4224 8192 1920 4224>; + samsung,mainscaler-ext; + samsung,lcd-wb; + }; + }; + }; +}; + +#include "s5pv210-pinctrl.dtsi" diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index e0b15a6e8897fe84860a04d26d5d581b3f3161cf..45013b867c8d2c414a93469c475c99446a3b0e71 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -58,19 +58,19 @@ memory { reg = <0x20000000 0x8000000>; }; - slow_xtal: slow_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + clocks { + slow_xtal: slow_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - main_xtal: main_xtal { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <0>; - }; + main_xtal: main_xtal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; - clocks { adc_op_clk: adc_op_clk{ compatible = "fixed-clock"; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/sama5d3_gmac.dtsi b/arch/arm/boot/dts/sama5d3_gmac.dtsi index a6cb0508762f159579d719032e2dbb2d28ccb879..de5ed59fb446d5c7cefc8ddc02d2bbe24032b9bc 100644 --- a/arch/arm/boot/dts/sama5d3_gmac.dtsi +++ b/arch/arm/boot/dts/sama5d3_gmac.dtsi @@ -74,7 +74,7 @@ macb0_clk: macb0_clk { }; macb0: ethernet@f0028000 { - compatible = "cdns,pc302-gem", "cdns,gem"; + compatible = "atmel,sama5d3-gem"; reg = <0xf0028000 0x100>; interrupts = <34 IRQ_TYPE_LEVEL_HIGH 3>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sama5d3xcm.dtsi b/arch/arm/boot/dts/sama5d3xcm.dtsi index b0b1331c1974cf1a3c70a708cda0044e887ced54..f7d8583eef821938c876d4a4dbbeb26be6f7aa3a 100644 --- a/arch/arm/boot/dts/sama5d3xcm.dtsi +++ b/arch/arm/boot/dts/sama5d3xcm.dtsi @@ -18,12 +18,14 @@ memory { reg = <0x20000000 0x20000000>; }; - slow_xtal { - clock-frequency = <32768>; - }; + clocks { + slow_xtal { + clock-frequency = <32768>; + }; - main_xtal { - clock-frequency = <12000000>; + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/sama5d3xmb.dtsi b/arch/arm/boot/dts/sama5d3xmb.dtsi index 306eef0f97ef21fc51a0410d2e2a6d59186986b8..b8c6f20e780c995aa98a5c4061f8031d24f05798 100644 --- a/arch/arm/boot/dts/sama5d3xmb.dtsi +++ b/arch/arm/boot/dts/sama5d3xmb.dtsi @@ -45,6 +45,8 @@ i2c0: i2c@f0014000 { wm8904: wm8904@1a { compatible = "wm8904"; reg = <0x1a>; + clocks = <&pck0>; + clock-names = "mclk"; }; }; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index a99171c8a78222f97497b4d1de6f3897e2e5fca1..18662aec2ec48fb246818744216bda44f760a935 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -21,6 +21,10 @@ / { model = "KZM-A9-GT"; compatible = "renesas,kzm9g-reference", "renesas,sh73a0"; + aliases { + serial4 = &scifa4; + }; + cpus { cpu@0 { cpu0-supply = <&vdd_dvfs>; @@ -35,7 +39,7 @@ cpu@0 { }; chosen { - bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel earlyprintk=sh-sci.4,115200 rw"; + bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw"; }; memory { @@ -276,9 +280,6 @@ &mmcif { }; &pfc { - pinctrl-0 = <&scifa4_pins>; - pinctrl-names = "default"; - i2c3_pins: i2c3 { renesas,groups = "i2c3_1"; renesas,function = "i2c3"; @@ -318,6 +319,13 @@ fsia_pins: sounda { }; }; +&scifa4 { + pinctrl-0 = <&scifa4_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; + &sdhi0 { pinctrl-0 = <&sdhi0_pins>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index 5ecf552e1c009faf2317793e2b52ab6f24fc5655..910b79079d5a26d2740296df0a2ebae264962794 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -235,6 +235,78 @@ sdhi2: sd@ee140000 { status = "disabled"; }; + scifa0: serial@e6c40000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6c40000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 72 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa1: serial@e6c50000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6c50000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa2: serial@e6c60000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6c60000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa3: serial@e6c70000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6c70000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa4: serial@e6c80000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6c80000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa5: serial@e6cb0000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6cb0000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa6: serial@e6cc0000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6cc0000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 156 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifa7: serial@e6cd0000 { + compatible = "renesas,scifa-sh73a0", "renesas,scifa"; + reg = <0xe6cd0000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + scifb8: serial@e6c30000 { + compatible = "renesas,scifb-sh73a0", "renesas,scifb"; + reg = <0xe6c30000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + pfc: pfc@e6050000 { compatible = "renesas,pfc-sh73a0"; reg = <0xe6050000 0x8000>, diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index 4676f25e87a7e4e4c79023db4c289be156e2ea85..4d77ad690ed54d93bb863ded9f8b088b47f9ae9f 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -486,6 +486,8 @@ gmac0: ethernet@ff700000 { clock-names = "stmmaceth"; resets = <&rst EMAC0_RESET>; reset-names = "stmmaceth"; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; status = "disabled"; }; @@ -500,6 +502,8 @@ gmac1: ethernet@ff702000 { clock-names = "stmmaceth"; resets = <&rst EMAC1_RESET>; reset-names = "stmmaceth"; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; status = "disabled"; }; @@ -683,6 +687,7 @@ uart1: serial1@ffc03000 { }; rst: rstmgr@ffd05000 { + #reset-cells = <1>; compatible = "altr,rst-mgr"; reg = <0xffd05000 0x1000>; }; diff --git a/arch/arm/boot/dts/spear1310-evb.dts b/arch/arm/boot/dts/spear1310-evb.dts index b56a801e42a206451535684d6314a09063d6351c..d42c84b1df8d02aa4199ac01e68ee547458576d1 100644 --- a/arch/arm/boot/dts/spear1310-evb.dts +++ b/arch/arm/boot/dts/spear1310-evb.dts @@ -106,6 +106,10 @@ ahci@b1000000 { status = "okay"; }; + miphy@eb800000 { + status = "okay"; + }; + cf@b2800000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1310.dtsi b/arch/arm/boot/dts/spear1310.dtsi index 122ae94076c8a7785e2bf1e92c97dfee77bbc674..fa5f2bb5f106fd29aafddb40be9e821feab4ce86 100644 --- a/arch/arm/boot/dts/spear1310.dtsi +++ b/arch/arm/boot/dts/spear1310.dtsi @@ -29,24 +29,111 @@ spics: spics@e0700000{ #gpio-cells = <2>; }; - ahci@b1000000 { + miphy0: miphy@eb800000 { + compatible = "st,spear1310-miphy"; + reg = <0xeb800000 0x4000>; + misc = <&misc>; + phy-id = <0>; + #phy-cells = <1>; + status = "disabled"; + }; + + miphy1: miphy@eb804000 { + compatible = "st,spear1310-miphy"; + reg = <0xeb804000 0x4000>; + misc = <&misc>; + phy-id = <1>; + #phy-cells = <1>; + status = "disabled"; + }; + + miphy2: miphy@eb808000 { + compatible = "st,spear1310-miphy"; + reg = <0xeb808000 0x4000>; + misc = <&misc>; + phy-id = <2>; + #phy-cells = <1>; + status = "disabled"; + }; + + ahci0: ahci@b1000000 { compatible = "snps,spear-ahci"; reg = <0xb1000000 0x10000>; interrupts = <0 68 0x4>; + phys = <&miphy0 0>; + phy-names = "sata-phy"; status = "disabled"; }; - ahci@b1800000 { + ahci1: ahci@b1800000 { compatible = "snps,spear-ahci"; reg = <0xb1800000 0x10000>; interrupts = <0 69 0x4>; + phys = <&miphy1 0>; + phy-names = "sata-phy"; status = "disabled"; }; - ahci@b4000000 { + ahci2: ahci@b4000000 { compatible = "snps,spear-ahci"; reg = <0xb4000000 0x10000>; interrupts = <0 70 0x4>; + phys = <&miphy2 0>; + phy-names = "sata-phy"; + status = "disabled"; + }; + + pcie0: pcie@b1000000 { + compatible = "st,spear1340-pcie", "snps,dw-pcie"; + reg = <0xb1000000 0x4000>; + interrupts = <0 68 0x4>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 0 68 0x4>; + num-lanes = <1>; + phys = <&miphy0 1>; + phy-names = "pcie-phy"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000 /* configuration space */ + 0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ + status = "disabled"; + }; + + pcie1: pcie@b1800000 { + compatible = "st,spear1340-pcie", "snps,dw-pcie"; + reg = <0xb1800000 0x4000>; + interrupts = <0 69 0x4>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 0 69 0x4>; + num-lanes = <1>; + phys = <&miphy1 1>; + phy-names = "pcie-phy"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0x90000000 0x90000000 0 0x00020000 /* configuration space */ + 0x81000000 0 0 0x90020000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x90030000 0x90030000 0 0x0ffd0000>; /* non-prefetchable memory */ + status = "disabled"; + }; + + pcie2: pcie@b4000000 { + compatible = "st,spear1340-pcie", "snps,dw-pcie"; + reg = <0xb4000000 0x4000>; + interrupts = <0 70 0x4>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 0 70 0x4>; + num-lanes = <1>; + phys = <&miphy2 1>; + phy-names = "pcie-phy"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0xc0000000 0xc0000000 0 0x00020000 /* configuration space */ + 0x81000000 0 0 0xc0020000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0xc0030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear1340-evb.dts b/arch/arm/boot/dts/spear1340-evb.dts index d6c30ae0a8d75edc1fee019b1892d341401818fd..b23e05ed1d60226d36f3649b3e1a12ee2928c4bd 100644 --- a/arch/arm/boot/dts/spear1340-evb.dts +++ b/arch/arm/boot/dts/spear1340-evb.dts @@ -122,6 +122,10 @@ ahci@b1000000 { status = "okay"; }; + miphy@eb800000 { + status = "okay"; + }; + dma@ea800000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/spear1340.dtsi b/arch/arm/boot/dts/spear1340.dtsi index 54d128d35681a660d2625344a54f06a10ee0bf0b..e71df0f2cb52d579bcfef4d114cba5d6e5acddfb 100644 --- a/arch/arm/boot/dts/spear1340.dtsi +++ b/arch/arm/boot/dts/spear1340.dtsi @@ -31,10 +31,38 @@ spics: spics@e0700000{ status = "disabled"; }; - ahci@b1000000 { + miphy0: miphy@eb800000 { + compatible = "st,spear1340-miphy"; + reg = <0xeb800000 0x4000>; + misc = <&misc>; + #phy-cells = <1>; + status = "disabled"; + }; + + ahci0: ahci@b1000000 { compatible = "snps,spear-ahci"; reg = <0xb1000000 0x10000>; interrupts = <0 72 0x4>; + phys = <&miphy0 0>; + phy-names = "sata-phy"; + status = "disabled"; + }; + + pcie0: pcie@b1000000 { + compatible = "st,spear1340-pcie", "snps,dw-pcie"; + reg = <0xb1000000 0x4000>; + interrupts = <0 68 0x4>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0x0 0 &gic 0 68 0x4>; + num-lanes = <1>; + phys = <&miphy0 1>; + phy-names = "pcie-phy"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x00000800 0 0x80000000 0x80000000 0 0x00020000 /* configuration space */ + 0x81000000 0 0 0x80020000 0 0x00010000 /* downstream I/O */ + 0x82000000 0 0x80030000 0xc0030000 0 0x0ffd0000>; /* non-prefetchable memory */ status = "disabled"; }; diff --git a/arch/arm/boot/dts/spear13xx.dtsi b/arch/arm/boot/dts/spear13xx.dtsi index 4382547df58a70554abf0ca641175bc5cda2bc04..a6eb5436d26d45f62f336b86fb0be8f06ea560bd 100644 --- a/arch/arm/boot/dts/spear13xx.dtsi +++ b/arch/arm/boot/dts/spear13xx.dtsi @@ -83,8 +83,8 @@ ahb { #size-cells = <1>; compatible = "simple-bus"; ranges = <0x50000000 0x50000000 0x10000000 - 0xb0000000 0xb0000000 0x10000000 - 0xd0000000 0xd0000000 0x02000000 + 0x80000000 0x80000000 0x20000000 + 0xb0000000 0xb0000000 0x22000000 0xd8000000 0xd8000000 0x01000000 0xe0000000 0xe0000000 0x10000000>; @@ -220,6 +220,11 @@ apb { 0xd8000000 0xd8000000 0x01000000 0xe0000000 0xe0000000 0x10000000>; + misc: syscon@e0700000 { + compatible = "st,spear1340-misc", "syscon"; + reg = <0xe0700000 0x1000>; + }; + gpio0: gpio@e0600000 { compatible = "arm,pl061", "arm,primecell"; reg = <0xe0600000 0x1000>; diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index e41eedca3ce3c562a27fff268f09c43429cbc10f..9d2323020d340b4138dc5b5895d95ace4e8a7211 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -875,6 +875,10 @@ sdi3_per2@80119000 { reg = <0x80119000 0x1000>; interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 41 0 0x2>, /* Logical - DevToMem */ + <&dma 41 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>; clock-names = "sdi", "apb_pclk"; @@ -901,6 +905,10 @@ sdi5_per3@80008000 { reg = <0x80008000 0x1000>; interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + dmas = <&dma 43 0 0x2>, /* Logical - DevToMem */ + <&dma 43 0 0x0>; /* Logical - MemToDev */ + dma-names = "rx", "tx"; + clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>; clock-names = "sdi", "apb_pclk"; @@ -929,6 +937,7 @@ msp1: msp@80124000 { interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + /* This DMA channel only exist on DB8500 v1 */ dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */ dma-names = "tx"; @@ -962,6 +971,7 @@ msp3: msp@80125000 { interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + /* This DMA channel only exist on DB8500 v2 */ dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */ dma-names = "rx"; diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index 1c3574435ea81fe6f275aff7244c6fd828cd99d0..84d7c5d883f26bb5c8a181a6b9bc32d42ac23cc3 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -42,6 +42,8 @@ stmpe1601: stmpe1601@40 { interrupts = <26 IRQ_TYPE_EDGE_FALLING>; interrupt-parent = <&gpio6>; interrupt-controller; + vcc-supply = <&db8500_vsmps2_reg>; + vio-supply = <&db8500_vsmps2_reg>; wakeup-source; st,autosleep-timeout = <1024>; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index c40565320978e78f71c7d798476ba2b9b4a62689..18b65d1b14f2e9197d7ccdfb31d63f84ab4fe75b 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -88,6 +88,43 @@ tc3589x_keypad { }; }; }; + /* Sensors mounted on this board variant */ + i2c@80128000 { + lsm303dlh@18 { + /* Accelerometer */ + compatible = "st,lsm303dlh-accel"; + st,drdy-int-pin = <1>; + reg = <0x18>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_tvk_mode>; + }; + lsm303dlm@1e { + /* Magnetometer */ + compatible = "st,lsm303dlm-magn"; + reg = <0x1e>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&magneto_tvk_mode>; + }; + l3g4200d@68 { + /* Gyroscope */ + compatible = "st,l3g4200d-gyro"; + st,drdy-int-pin = <2>; + reg = <0x68>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + lsp001wm@5c { + /* Barometer/pressure sensor */ + compatible = "st,lps001wp-press"; + reg = <0x5c>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + }; pinctrl { /* Pull up this GPIO pin */ tc35893 { @@ -114,6 +151,28 @@ tvk_cfg { }; }; }; + accelerometer { + accel_tvk_mode: accel_tvk { + /* Accelerometer interrupt lines 1 & 2 */ + tvk_cfg { + ste,pins = "GPIO82_C1", "GPIO83_D3"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + magnetometer { + magneto_tvk_mode: magneto_tvk { + /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ + tvk_cfg1 { + ste,pins = "GPIO31_V3"; + ste,config = <&gpio_in_pu>; + }; + tvk_cfg2 { + ste,pins = "GPIO32_V2"; + ste,config = <&gpio_in_pd>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index c2341061b943290bbd5c897158a4a8c6bdd441cc..bcc1f0c37f49c42b40dc197c6e5ffb9b1b29b0da 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -35,8 +35,6 @@ pinctrl { */ pinctrl-names = "default"; pinctrl-0 = <&ipgpio_hrefv60_mode>, - <&accel_hrefv60_mode>, - <&magneto_hrefv60_mode>, <&etm_hrefv60_mode>, <&nahj_hrefv60_mode>, <&nfc_hrefv60_mode>, @@ -83,28 +81,6 @@ hrefv60_cfg3 { }; }; }; - accelerometer { - accel_hrefv60_mode: accel_hrefv60 { - /* Accelerometer interrupt lines 1 & 2 */ - hrefv60_cfg1 { - ste,pins = "GPIO82_C1", "GPIO83_D3"; - ste,config = <&gpio_in_pu>; - }; - }; - }; - magnetometer { - magneto_hrefv60_mode: magneto_hrefv60 { - /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ - hrefv60_cfg1 { - ste,pins = "GPIO31_V3"; - ste,config = <&gpio_in_pu>; - }; - hrefv60_cfg2 { - ste,pins = "GPIO32_V2"; - ste,config = <&gpio_in_pd>; - }; - }; - }; etm { /* * Drive D19-D23 for the ETM PTM trace interface low, diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 474ef83229cd9b368a9604205d9e8c8a42c68972..4a2000c620ad7a6a77f3b7aec18efc9a79e3a94e 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -241,6 +241,40 @@ i2c@80128000 { pinctrl-names = "default","sleep"; pinctrl-0 = <&i2c2_default_mode>; pinctrl-1 = <&i2c2_sleep_mode>; + lsm303dlh@18 { + /* Accelerometer */ + compatible = "st,lsm303dlh-accel"; + st,drdy-int-pin = <1>; + reg = <0x18>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&accel_snowball_mode>; + }; + lsm303dlm@1e { + /* Magnetometer */ + compatible = "st,lsm303dlm-magn"; + reg = <0x1e>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&magneto_snowball_mode>; + }; + l3g4200d@68 { + /* Gyroscope */ + compatible = "st,l3g4200d-gyro"; + st,drdy-int-pin = <2>; + reg = <0x68>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; + lsp001wm@5c { + /* Barometer/pressure sensor */ + compatible = "st,lps001wp-press"; + reg = <0x5c>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + vddio-supply = <&db8500_vsmps2_reg>; + }; }; i2c@80110000 { @@ -361,9 +395,7 @@ pinctrl { * can be moved over to being controlled by respective device. */ pinctrl-names = "default"; - pinctrl-0 = <&accel_snowball_mode>, - <&magneto_snowball_mode>, - <&gbf_snowball_mode>, + pinctrl-0 = <&gbf_snowball_mode>, <&wlan_snowball_mode>; ethernet { diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 0b97c071dd56b974897fcd2e445aeb1b23bac879..9e99ade35e37b3e2117bd1b3fd9ef304875cdfc2 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -88,6 +88,12 @@ led_pins_a1000: led_pins@0 { }; }; + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -98,6 +104,15 @@ i2c0: i2c@01c2ac00 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts new file mode 100644 index 0000000000000000000000000000000000000000..1763cc7ec02385297e6d93f93f2f5f448da25ed1 --- /dev/null +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -0,0 +1,110 @@ +/* + * Copyright 2014 Hans de Goede + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun4i-a10.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "BA10 tvbox"; + compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10"; + + soc@01c00000 { + emac: ethernet@01c0b000 { + pinctrl-names = "default"; + pinctrl-0 = <&emac_pins_a>; + phy = <&phy1>; + status = "okay"; + }; + + mdio@01c0b080 { + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + usb2_vbus_pin_a: usb2_vbus_pin@0 { + allwinner,pins = "PH12"; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + gpio = <&pio 7 12 0>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index c200eacc66e8ba06f4d578b569b0d1063fa59b0f..3ce56bfbc0b5f6ee46b685112648b5c9af7c8fbf 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -80,6 +80,12 @@ led_pins_cubieboard: led_pins@0 { }; }; + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -90,6 +96,15 @@ i2c0: i2c@01c2ac00 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; i2c1: i2c@01c2b000 { diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 547fadcb984b98e8296f2865ccd2c1a8f52df01c..891ea446abae9480f189b2d95fb31608ca5aa3f9 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -87,11 +87,32 @@ usb2_vbus_pin_hackberry: usb2_vbus_pin@0 { }; }; + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; }; reg_emac_3v3: emac-3v3 { diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index f13723e18b86964a1e486bdcea013cce0942691a..6b0c37812ade80ef457fe38b56d114be02659c28 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -40,12 +40,6 @@ uart0: serial@01c28000 { status = "okay"; }; - i2c0: i2c@01c2ac00 { - pinctrl-names = "default"; - pinctrl-0 = <&i2c0_pins_a>; - status = "okay"; - }; - usbphy: phy@01c13400 { usb1_vbus-supply = <®_usb1_vbus>; usb2_vbus-supply = <®_usb2_vbus>; @@ -67,6 +61,21 @@ ehci1: usb@01c1c000 { ohci1: usb@01c1c400 { status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; }; reg_usb1_vbus: usb1-vbus { diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index c01cea50cf0c7f175ec594ad31b645dbbd240256..b9ecce60f2e7e68d77621ec9a99a4b2ddbedd07a 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -52,11 +52,39 @@ ohci1: usb@01c1c400 { status = "okay"; }; + pinctrl@01c20800 { + ir0_pins_a: ir0@0 { + /* The ir receiver is not always populated */ + allwinner,pull = <1>; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; }; reg_usb1_vbus: usb1-vbus { diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index d46a7dbecef5b241f09755ab77a9707f6a76a30a..d046d568f5a1f1f55b93a387e205838e9499aee2 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -91,6 +91,21 @@ uart0: serial@01c28000 { pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; }; leds { diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index fb03bccb78d2b5f085b75478d942980e46ddcee4..6675bcd7860e8eea367ca0fd9975e3ff2aea95b9 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -76,6 +76,15 @@ i2c0: i2c@01c2ac00 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupts = <0>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index d96e179490ce8a154a3653b69a585f9ded5cd835..459cb63777641ed594b3ca85c8d738dae969a2ce 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -509,7 +509,7 @@ pio: pinctrl@01c20800 { clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; - #address-cells = <1>; + #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; @@ -593,6 +593,20 @@ mmc0_cd_pin_reference_design: mmc0_cd_pin@0 { allwinner,drive = <0>; allwinner,pull = <1>; }; + + ir0_pins_a: ir0@0 { + allwinner,pins = "PB3","PB4"; + allwinner,function = "ir0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + ir1_pins_a: ir1@0 { + allwinner,pins = "PB22","PB23"; + allwinner,function = "ir1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -621,6 +635,24 @@ pwm: pwm@01c20e00 { status = "disabled"; }; + ir0: ir@01c21800 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 6>, <&ir0_clk>; + clock-names = "apb", "ir"; + interrupts = <5>; + reg = <0x01c21800 0x40>; + status = "disabled"; + }; + + ir1: ir@01c21c00 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 7>, <&ir1_clk>; + clock-names = "apb", "ir"; + interrupts = <6>; + reg = <0x01c21c00 0x40>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-a10-sid"; reg = <0x01c23800 0x10>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index b64f705d90080888024ff1d977e0ca57eafd3915..24b0ad3a7c07f53a2af4bb1e22c3ba4f20e3d03d 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -422,7 +422,7 @@ pio: pinctrl@01c20800 { clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; - #address-cells = <1>; + #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 3b2a94c40f6e3f7ee7666c534149715f7d7e8b7d..bf86e65dd167bf2aad4131c1060d57698fedfc77 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -395,7 +395,7 @@ pio: pinctrl@01c20800 { clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; - #address-cells = <1>; + #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts new file mode 100644 index 0000000000000000000000000000000000000000..f142065b3c1fb4c807cf5c25ee8e039179dbd94c --- /dev/null +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -0,0 +1,119 @@ +/* + * Copyright 2014 Maxime Ripard + * + * Maxime Ripard + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun6i-a31.dtsi" +/include/ "sunxi-common-regulators.dtsi" + +/ { + model = "Merrii A31 Hummingbird"; + compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; + vmmc-supply = <®_vcc3v0>; + bus-width = <4>; + cd-gpios = <&pio 0 8 0>; /* PA8 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c19400 { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; + }; + + ehci0: usb@01c1a000 { + status = "okay"; + }; + + ohci0: usb@01c1a400 { + status = "okay"; + }; + + pio: pinctrl@01c20800 { + mmc0_pins_a: mmc0@0 { + /* external pull-ups missing for some pins */ + allwinner,pull = <1>; + }; + + mmc0_cd_pin_hummingbird: mmc0_cd_pin@0 { + allwinner,pins = "PA8"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <1>; + }; + + usb1_vbus_pin_a: usb1_vbus_pin@0 { + allwinner,pins = "PH24"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + /* pull-ups and devices require AXP221 DLDO3 */ + status = "failed"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + + pcf8563: rtc@51 { + compatible = "nxp,pcf8563"; + reg = <0x51>; + }; + }; + + gmac: ethernet@01c30000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_rgmii_a>; + phy = <&phy1>; + phy-mode = "rgmii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + reg_usb1_vbus: usb1-vbus { + pinctrl-0 = <&usb1_vbus_pin_a>; + gpio = <&pio 7 24 0>; /* PH24 */ + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index a9dfa12eb73502d521f679d62c6af9b9fb62d7f9..44b07e512c2448cbc24821668dc43ceaf6915638 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -23,6 +23,7 @@ aliases { serial3 = &uart3; serial4 = &uart4; serial5 = &uart5; + ethernet0 = &gmac; }; @@ -281,6 +282,34 @@ usb_clk: clk@01c200cc { "usb_ohci0", "usb_ohci1", "usb_ohci2"; }; + + /* + * The following two are dummy clocks, placeholders used in the gmac_tx + * clock. The gmac driver will choose one parent depending on the PHY + * interface mode, using clk_set_rate auto-reparenting. + * The actual TX clock rate is not controlled by the gmac_tx clock. + */ + mii_phy_tx_clk: clk@1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <25000000>; + clock-output-names = "mii_phy_tx"; + }; + + gmac_int_tx_clk: clk@2 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "gmac_int_tx"; + }; + + gmac_tx_clk: clk@01c200d0 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-gmac-clk"; + reg = <0x01c200d0 0x4>; + clocks = <&mii_phy_tx_clk>, <&gmac_int_tx_clk>; + clock-output-names = "gmac_tx"; + }; }; soc@01c00000 { @@ -429,7 +458,7 @@ pio: pinctrl@01c20800 { clocks = <&apb1_gates 5>; gpio-controller; interrupt-controller; - #address-cells = <1>; + #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; @@ -467,6 +496,48 @@ mmc0_pins_a: mmc0@0 { allwinner,drive = <2>; allwinner,pull = <0>; }; + + gmac_pins_mii_a: gmac_mii@0 { + allwinner,pins = "PA0", "PA1", "PA2", "PA3", + "PA8", "PA9", "PA11", + "PA12", "PA13", "PA14", "PA19", + "PA20", "PA21", "PA22", "PA23", + "PA24", "PA26", "PA27"; + allwinner,function = "gmac"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + gmac_pins_gmii_a: gmac_gmii@0 { + allwinner,pins = "PA0", "PA1", "PA2", "PA3", + "PA4", "PA5", "PA6", "PA7", + "PA8", "PA9", "PA10", "PA11", + "PA12", "PA13", "PA14", "PA15", + "PA16", "PA17", "PA18", "PA19", + "PA20", "PA21", "PA22", "PA23", + "PA24", "PA25", "PA26", "PA27"; + allwinner,function = "gmac"; + /* + * data lines in GMII mode run at 125MHz and + * might need a higher signal drive strength + */ + allwinner,drive = <2>; + allwinner,pull = <0>; + }; + + gmac_pins_rgmii_a: gmac_rgmii@0 { + allwinner,pins = "PA0", "PA1", "PA2", "PA3", + "PA9", "PA10", "PA11", + "PA12", "PA13", "PA14", "PA19", + "PA20", "PA25", "PA26", "PA27"; + allwinner,function = "gmac"; + /* + * data lines in RGMII mode use DDR mode + * and need a higher signal drive strength + */ + allwinner,drive = <3>; + allwinner,pull = <0>; + }; }; ahb1_rst: reset@01c202c0 { @@ -621,6 +692,23 @@ i2c3: i2c@01c2b800 { status = "disabled"; }; + gmac: ethernet@01c30000 { + compatible = "allwinner,sun7i-a20-gmac"; + reg = <0x01c30000 0x1054>; + interrupts = <0 82 4>; + interrupt-names = "macirq"; + clocks = <&ahb1_gates 17>, <&gmac_tx_clk>; + clock-names = "stmmaceth", "allwinner_gmac_tx"; + resets = <&ahb1_rst 17>; + reset-names = "stmmaceth"; + snps,pbl = <2>; + snps,fixed-burst; + snps,force_sf_dma_mode; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + timer@01c60000 { compatible = "allwinner,sun6i-a31-hstimer", "allwinner,sun7i-a20-hstimer"; reg = <0x01c60000 0x1000>; @@ -756,7 +844,7 @@ r_pio: pinctrl@01f02c00 { resets = <&apb0_rst 0>; gpio-controller; interrupt-controller; - #address-cells = <1>; + #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index a5ad945197e833487c0ce09bdc94bbaf84850730..53680983461a1a7d3206678c9950d5007224992d 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -66,6 +66,12 @@ led_pins_cubieboard2: led_pins@0 { }; }; + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -76,6 +82,16 @@ i2c0: i2c@01c2ac00 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; i2c1: i2c@01c2b000 { diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index b87fea90148918f308565daf9a2b988c88267bfc..a6c1a3c717bcaf94d2115f9e147059da01c7a984 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -100,6 +100,12 @@ pwm: pwm@01c20e00 { status = "okay"; }; + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; @@ -110,6 +116,16 @@ i2c0: i2c@01c2ac00 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; i2c1: i2c@01c2b000 { diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index b77308e901994c3120160ec2d90702704081b3db..6a67712d417acdb8dcea56c545875c3dccb54776 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -94,12 +94,34 @@ led_pins_i12_tvbox: led_pins@0 { }; }; + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + uart0: serial@01c28000 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + gmac: ethernet@01c50000 { pinctrl-names = "default"; pinctrl-0 = <&gmac_pins_mii_a>; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index b759630bc9a99d9461d8bb171274881dca59c016..9d669cdf031d1aa1ea78c2d8a7c23b713dff3f98 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -122,6 +122,16 @@ i2c0: i2c@01c2ac00 { pinctrl-names = "default"; pinctrl-0 = <&i2c0_pins_a>; status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; }; i2c1: i2c@01c2b000 { diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts new file mode 100644 index 0000000000000000000000000000000000000000..046dfc0d45d8ebb21d8a7dd050fdb500dbbf6d35 --- /dev/null +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -0,0 +1,173 @@ +/* + * Copyright 2014 Zoltan HERPAI + * Zoltan HERPAI + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun7i-a20.dtsi" +/include/ "sunxi-common-regulators.dtsi" +#include +#include + +/ { + model = "LinkSprite pcDuino3"; + compatible = "linksprite,pcduino3", "allwinner,sun7i-a20"; + + soc@01c00000 { + mmc0: mmc@01c0f000 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; + vmmc-supply = <®_vcc3v3>; + bus-width = <4>; + cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-inverted; + status = "okay"; + }; + + usbphy: phy@01c13400 { + usb1_vbus-supply = <®_usb1_vbus>; + usb2_vbus-supply = <®_usb2_vbus>; + status = "okay"; + }; + + ehci0: usb@01c14000 { + status = "okay"; + }; + + ohci0: usb@01c14400 { + status = "okay"; + }; + + ahci: sata@01c18000 { + target-supply = <®_ahci_5v>; + status = "okay"; + }; + + ehci1: usb@01c1c000 { + status = "okay"; + }; + + ohci1: usb@01c1c400 { + status = "okay"; + }; + + pinctrl@01c20800 { + ahci_pwr_pin_a: ahci_pwr_pin@0 { + allwinner,pins = "PH2"; + }; + + led_pins_pcduino3: led_pins@0 { + allwinner,pins = "PH15", "PH16"; + allwinner,function = "gpio_out"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + key_pins_pcduino3: key_pins@0 { + allwinner,pins = "PH17", "PH18", "PH19"; + allwinner,function = "gpio_in"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + + ir0: ir@01c21800 { + pinctrl-names = "default"; + pinctrl-0 = <&ir0_pins_a>; + status = "okay"; + }; + + uart0: serial@01c28000 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins_a>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + + axp209: pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 8>; + + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + gmac: ethernet@01c50000 { + pinctrl-names = "default"; + pinctrl-0 = <&gmac_pins_mii_a>; + phy = <&phy1>; + phy-mode = "mii"; + status = "okay"; + + phy1: ethernet-phy@1 { + reg = <1>; + }; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_pcduino3>; + + tx { + label = "pcduino3:green:tx"; + gpios = <&pio 7 15 GPIO_ACTIVE_LOW>; + }; + + rx { + label = "pcduino3:green:rx"; + gpios = <&pio 7 16 GPIO_ACTIVE_LOW>; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&key_pins_pcduino3>; + #address-cells = <1>; + #size-cells = <0>; + button@0 { + label = "Key Back"; + linux,code = ; + gpios = <&pio 7 17 GPIO_ACTIVE_LOW>; + }; + button@1 { + label = "Key Home"; + linux,code = ; + gpios = <&pio 7 18 GPIO_ACTIVE_LOW>; + }; + button@2 { + label = "Key Menu"; + linux,code = ; + gpios = <&pio 7 19 GPIO_ACTIVE_LOW>; + }; + }; + + reg_usb1_vbus: usb1-vbus { + status = "okay"; + }; + + reg_usb2_vbus: usb2-vbus { + status = "okay"; + }; + + reg_ahci_5v: ahci-5v { + gpio = <&pio 7 2 0>; + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 01e94664232abc2ce1059f032f1bb719d46da48c..4011628c738101b0004b6bb9da7f4c0ee3fa1e70 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -586,7 +586,7 @@ pio: pinctrl@01c20800 { clocks = <&apb0_gates 5>; gpio-controller; interrupt-controller; - #address-cells = <1>; + #interrupt-cells = <2>; #size-cells = <0>; #gpio-cells = <3>; @@ -738,6 +738,20 @@ mmc3_pins_a: mmc3@0 { allwinner,drive = <2>; allwinner,pull = <0>; }; + + ir0_pins_a: ir0@0 { + allwinner,pins = "PB3","PB4"; + allwinner,function = "ir0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + ir1_pins_a: ir1@0 { + allwinner,pins = "PB22","PB23"; + allwinner,function = "ir1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -771,6 +785,24 @@ pwm: pwm@01c20e00 { status = "disabled"; }; + ir0: ir@01c21800 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 6>, <&ir0_clk>; + clock-names = "apb", "ir"; + interrupts = <0 5 4>; + reg = <0x01c21800 0x40>; + status = "disabled"; + }; + + ir1: ir@01c21c00 { + compatible = "allwinner,sun4i-a10-ir"; + clocks = <&apb0_gates 7>, <&ir1_clk>; + clock-names = "apb", "ir"; + interrupts = <0 6 4>; + reg = <0x01c21c00 0x40>; + status = "disabled"; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts new file mode 100644 index 0000000000000000000000000000000000000000..34002e3eba9d8ea658e77f64c34a9fd8632da118 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -0,0 +1,30 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun8i-a23.dtsi" + +/ { + model = "Ippo Q8H Dual Core Tablet (v5)"; + compatible = "ippo,q8h-v5", "allwinner,sun8i-a23"; + + chosen { + bootargs = "earlyprintk console=ttyS0,115200"; + }; + + soc@01c00000 { + r_uart: serial@01f02800 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun8i-a23.dtsi b/arch/arm/boot/dts/sun8i-a23.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..54ac0787216ae0e2b7093e74b329444d46cdbde9 --- /dev/null +++ b/arch/arm/boot/dts/sun8i-a23.dtsi @@ -0,0 +1,343 @@ +/* + * Copyright 2014 Chen-Yu Tsai + * + * Chen-Yu Tsai + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/include/ "skeleton.dtsi" + +/ { + interrupt-parent = <&gic>; + + aliases { + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &r_uart; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0>; + }; + + cpu@1 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <1>; + }; + }; + + memory { + reg = <0x40000000 0x40000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + osc24M: osc24M_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + clock-output-names = "osc24M"; + }; + + osc32k: osc32k_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <32768>; + clock-output-names = "osc32k"; + }; + + pll1: clk@01c20000 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-pll1-clk"; + reg = <0x01c20000 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll1"; + }; + + /* dummy clock until actually implemented */ + pll6: pll6_clk { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <600000000>; + clock-output-names = "pll6"; + }; + + cpu: cpu_clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-cpu-clk"; + reg = <0x01c20050 0x4>; + + /* + * PLL1 is listed twice here. + * While it looks suspicious, it's actually documented + * that way both in the datasheet and in the code from + * Allwinner. + */ + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; + clock-output-names = "cpu"; + }; + + axi: axi_clk@01c20050 { + #clock-cells = <0>; + compatible = "allwinner,sun8i-a23-axi-clk"; + reg = <0x01c20050 0x4>; + clocks = <&cpu>; + clock-output-names = "axi"; + }; + + ahb1_mux: ahb1_mux_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-ahb1-mux-clk"; + reg = <0x01c20054 0x4>; + clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>; + clock-output-names = "ahb1_mux"; + }; + + ahb1: ahb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-ahb-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb1_mux>; + clock-output-names = "ahb1"; + }; + + apb1: apb1_clk@01c20054 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb0-clk"; + reg = <0x01c20054 0x4>; + clocks = <&ahb1>; + clock-output-names = "apb1"; + }; + + ahb1_gates: clk@01c20060 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-ahb1-gates-clk"; + reg = <0x01c20060 0x8>; + clocks = <&ahb1>; + clock-output-names = "ahb1_mipidsi", "ahb1_dma", + "ahb1_mmc0", "ahb1_mmc1", "ahb1_mmc2", + "ahb1_nand", "ahb1_sdram", + "ahb1_hstimer", "ahb1_spi0", + "ahb1_spi1", "ahb1_otg", "ahb1_ehci", + "ahb1_ohci", "ahb1_ve", "ahb1_lcd", + "ahb1_csi", "ahb1_be", "ahb1_fe", + "ahb1_gpu", "ahb1_spinlock", + "ahb1_drc"; + }; + + apb1_gates: clk@01c20068 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-apb1-gates-clk"; + reg = <0x01c20068 0x4>; + clocks = <&apb1>; + clock-output-names = "apb1_codec", "apb1_pio", + "apb1_daudio0", "apb1_daudio1"; + }; + + apb2_mux: apb2_mux_clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-a10-apb1-mux-clk"; + reg = <0x01c20058 0x4>; + clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>; + clock-output-names = "apb2_mux"; + }; + + apb2: apb2_clk@01c20058 { + #clock-cells = <0>; + compatible = "allwinner,sun6i-a31-apb2-div-clk"; + reg = <0x01c20058 0x4>; + clocks = <&apb2_mux>; + clock-output-names = "apb2"; + }; + + apb2_gates: clk@01c2006c { + #clock-cells = <1>; + compatible = "allwinner,sun8i-a23-apb2-gates-clk"; + reg = <0x01c2006c 0x4>; + clocks = <&apb2>; + clock-output-names = "apb2_i2c0", "apb2_i2c1", + "apb2_i2c2", "apb2_uart0", + "apb2_uart1", "apb2_uart2", + "apb2_uart3", "apb2_uart4"; + }; + }; + + soc@01c00000 { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + ahb1_rst: reset@01c202c0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202c0 0xc>; + }; + + apb1_rst: reset@01c202d0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d0 0x4>; + }; + + apb2_rst: reset@01c202d8 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d8 0x4>; + }; + + timer@01c20c00 { + compatible = "allwinner,sun4i-a10-timer"; + reg = <0x01c20c00 0xa0>; + interrupts = <0 18 4>, + <0 19 4>; + clocks = <&osc24M>; + }; + + wdt0: watchdog@01c20ca0 { + compatible = "allwinner,sun6i-a31-wdt"; + reg = <0x01c20ca0 0x20>; + interrupts = <0 25 4>; + }; + + uart0: serial@01c28000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28000 0x400>; + interrupts = <0 0 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 16>; + resets = <&apb2_rst 16>; + status = "disabled"; + }; + + uart1: serial@01c28400 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28400 0x400>; + interrupts = <0 1 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 17>; + resets = <&apb2_rst 17>; + status = "disabled"; + }; + + uart2: serial@01c28800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28800 0x400>; + interrupts = <0 2 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 18>; + resets = <&apb2_rst 18>; + status = "disabled"; + }; + + uart3: serial@01c28c00 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c28c00 0x400>; + interrupts = <0 3 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 19>; + resets = <&apb2_rst 19>; + status = "disabled"; + }; + + uart4: serial@01c29000 { + compatible = "snps,dw-apb-uart"; + reg = <0x01c29000 0x400>; + interrupts = <0 4 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb2_gates 20>; + resets = <&apb2_rst 20>; + status = "disabled"; + }; + + gic: interrupt-controller@01c81000 { + compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + reg = <0x01c81000 0x1000>, + <0x01c82000 0x1000>, + <0x01c84000 0x2000>, + <0x01c86000 0x2000>; + interrupt-controller; + #interrupt-cells = <3>; + interrupts = <1 9 0xf04>; + }; + + prcm@01f01400 { + compatible = "allwinner,sun8i-a23-prcm"; + reg = <0x01f01400 0x200>; + + ar100: ar100_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "ar100"; + }; + + ahb0: ahb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&ar100>; + clock-output-names = "ahb0"; + }; + + apb0: apb0_clk { + compatible = "allwinner,sun8i-a23-apb0-clk"; + #clock-cells = <0>; + clocks = <&ahb0>; + clock-output-names = "apb0"; + }; + + apb0_gates: apb0_gates_clk { + compatible = "allwinner,sun8i-a23-apb0-gates-clk"; + #clock-cells = <1>; + clocks = <&apb0>; + clock-output-names = "apb0_pio", "apb0_timer", + "apb0_rsb", "apb0_uart", + "apb0_i2c"; + }; + + apb0_rst: apb0_rst { + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; + }; + + r_uart: serial@01f02800 { + compatible = "snps,dw-apb-uart"; + reg = <0x01f02800 0x400>; + interrupts = <0 38 4>; + reg-shift = <2>; + reg-io-width = <4>; + clocks = <&apb0_gates 4>; + resets = <&apb0_rst 4>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra114-roth.dts b/arch/arm/boot/dts/tegra114-roth.dts index 0b0e8e07d9658126b504058e5f82525e2071e812..c7c6825f11fbb1b902b6f230eb62d8d8f88077a6 100644 --- a/arch/arm/boot/dts/tegra114-roth.dts +++ b/arch/arm/boot/dts/tegra114-roth.dts @@ -28,6 +28,22 @@ memory { reg = <0x80000000 0x79600000>; }; + host1x@50000000 { + dsi@54300000 { + status = "okay"; + + vdd-supply = <&vdd_1v2_ap>; + + panel@0 { + compatible = "lg,lh500wx1-sd03"; + reg = <0>; + + power-supply = <&vdd_lcd>; + backlight = <&backlight>; + }; + }; + }; + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -244,7 +260,7 @@ sdmmc1_clk_pz0 { nvidia,function = "sdmmc1"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; sdmmc1_cmd_pz1 { nvidia,pins = "sdmmc1_cmd_pz1", @@ -262,7 +278,7 @@ sdmmc3_clk_pa6 { nvidia,function = "sdmmc3"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; sdmmc3_cmd_pa7 { nvidia,pins = "sdmmc3_cmd_pa7", @@ -290,7 +306,7 @@ sdmmc4_clk_pcc4 { nvidia,function = "sdmmc4"; nvidia,pull = ; nvidia,tristate = ; - nvidia,enable-input = ; + nvidia,enable-input = ; }; sdmmc4_cmd_pt7 { nvidia,pins = "sdmmc4_cmd_pt7", @@ -730,7 +746,6 @@ drive_sdio1 { nvidia,pins = "drive_sdio1"; nvidia,high-speed-mode = ; nvidia,schmitt = ; - nvidia,low-power-mode = ; nvidia,pull-down-strength = <36>; nvidia,pull-up-strength = <20>; nvidia,slew-rate-rising = ; @@ -740,7 +755,6 @@ drive_sdio3 { nvidia,pins = "drive_sdio3"; nvidia,high-speed-mode = ; nvidia,schmitt = ; - nvidia,low-power-mode = ; nvidia,pull-down-strength = <36>; nvidia,pull-up-strength = <20>; nvidia,slew-rate-rising = ; @@ -750,12 +764,10 @@ drive_gma { nvidia,pins = "drive_gma"; nvidia,high-speed-mode = ; nvidia,schmitt = ; - nvidia,low-power-mode = ; nvidia,pull-down-strength = <2>; nvidia,pull-up-strength = <2>; nvidia,slew-rate-rising = ; nvidia,slew-rate-falling = ; - nvidia,drive-type = <1>; }; }; }; @@ -815,7 +827,6 @@ vdd_1v8: smps3 { regulator-name = "vdd-1v8"; regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; - regulator-always-on; regulator-boot-on; }; @@ -862,10 +873,11 @@ ldo2 { regulator-name = "vdd-2v8-display"; regulator-min-microvolt = <2800000>; regulator-max-microvolt = <2800000>; + regulator-always-on; regulator-boot-on; }; - ldo3 { + vdd_1v2_ap: ldo3 { regulator-name = "avdd-1v2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <1200000>; @@ -1052,7 +1064,7 @@ lcd_bl_en: regulator@0 { regulator-boot-on; }; - regulator@1 { + vdd_lcd: regulator@1 { compatible = "regulator-fixed"; reg = <1>; regulator-name = "vdd_lcd_1v8"; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index fdc559ab2db3674b10841e38caff0cf2b8512d60..80b8eddb4105089743347b20dfb921c613af96ae 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -220,6 +220,12 @@ gpio: gpio@6000d000 { interrupt-controller; }; + apbmisc@70000800 { + compatible = "nvidia,tegra114-apbmisc", "nvidia,tegra20-apbmisc"; + reg = <0x70000800 0x64 /* Chip revision */ + 0x70000008 0x04>; /* Strapping options */ + }; + pinmux: pinmux@70000868 { compatible = "nvidia,tegra114-pinmux"; reg = <0x70000868 0x148 /* Pad control registers */ @@ -485,6 +491,15 @@ pmc@7000e400 { clock-names = "pclk", "clk32k_in"; }; + fuse@7000f800 { + compatible = "nvidia,tegra114-efuse"; + reg = <0x7000f800 0x400>; + clocks = <&tegra_car TEGRA114_CLK_FUSE>; + clock-names = "fuse"; + resets = <&tegra_car 39>; + reset-names = "fuse"; + }; + iommu@70019010 { compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu"; reg = <0x70019010 0x02c @@ -657,6 +672,8 @@ phy1: usb-phy@7d000000 { <&tegra_car TEGRA114_CLK_PLL_U>, <&tegra_car TEGRA114_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -667,6 +684,7 @@ phy1: usb-phy@7d000000 { nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -690,6 +708,8 @@ phy3: usb-phy@7d008000 { <&tegra_car TEGRA114_CLK_PLL_U>, <&tegra_car TEGRA114_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/tegra124-jetson-tk1.dts b/arch/arm/boot/dts/tegra124-jetson-tk1.dts index e31fb61a81d33ba9ee553dedf951199dd3223e26..624b0fba2d0a0f27861fa4c2a97694c23a7e3088 100644 --- a/arch/arm/boot/dts/tegra124-jetson-tk1.dts +++ b/arch/arm/boot/dts/tegra124-jetson-tk1.dts @@ -1461,7 +1461,7 @@ sd0 { regulator-max-microamp = <3500000>; regulator-always-on; regulator-boot-on; - ams,external-control = <2>; + ams,ext-control = <2>; }; sd1 { @@ -1472,7 +1472,7 @@ sd1 { regulator-max-microamp = <2500000>; regulator-always-on; regulator-boot-on; - ams,external-control = <1>; + ams,ext-control = <1>; }; vdd_1v35_lp0: sd2 { @@ -1521,7 +1521,7 @@ ldo0 { regulator-max-microvolt = <1050000>; regulator-boot-on; regulator-always-on; - ams,external-control = <1>; + ams,ext-control = <1>; }; ldo1 { @@ -1619,6 +1619,32 @@ pmc@0,7000e400 { nvidia,sys-clock-req-active-high; }; + padctl@0,7009f000 { + pinctrl-0 = <&padctl_default>; + pinctrl-names = "default"; + + padctl_default: pinmux { + usb3 { + nvidia,lanes = "pcie-0", "pcie-1"; + nvidia,function = "usb3"; + nvidia,iddq = <0>; + }; + + pcie { + nvidia,lanes = "pcie-2", "pcie-3", + "pcie-4"; + nvidia,function = "pcie"; + nvidia,iddq = <0>; + }; + + sata { + nvidia,lanes = "sata-0"; + nvidia,function = "sata"; + nvidia,iddq = <0>; + }; + }; + }; + /* SD card */ sdhci@0,700b0400 { status = "okay"; @@ -1633,6 +1659,7 @@ sdhci@0,700b0400 { sdhci@0,700b0600 { status = "okay"; bus-width = <8>; + non-removable; }; ahub@0,70300000 { diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index f0bb8424402572f01077abf1e023a18f630d2fb5..70ad91d1a20be3760bd33c4a864ae835e87b644f 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -682,7 +682,7 @@ sd0 { regulator-max-microamp = <3500000>; regulator-always-on; regulator-boot-on; - ams,external-control = <2>; + ams,ext-control = <2>; }; sd1 { @@ -693,7 +693,7 @@ sd1 { regulator-max-microamp = <2500000>; regulator-always-on; regulator-boot-on; - ams,external-control = <1>; + ams,ext-control = <1>; }; vdd_1v35_lp0: sd2 { @@ -742,7 +742,7 @@ ldo0 { regulator-max-microvolt = <1050000>; regulator-boot-on; regulator-always-on; - ams,external-control = <1>; + ams,ext-control = <1>; }; ldo1 { @@ -816,7 +816,7 @@ ldo11 { spi@0,7000d400 { status = "okay"; - cros-ec@0 { + cros_ec: cros-ec@0 { compatible = "google,cros-ec-spi"; spi-max-frequency = <4000000>; interrupt-parent = <&gpio>; @@ -825,96 +825,30 @@ cros-ec@0 { google,cros-ec-spi-msg-delay = <2000>; - cros-ec-keyb { - compatible = "google,cros-ec-keyb"; - keypad,num-rows = <8>; - keypad,num-columns = <13>; - google,needs-ghost-filter; - - linux,keymap = < - MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA) - MATRIX_KEY(0x00, 0x02, KEY_F1) - MATRIX_KEY(0x00, 0x03, KEY_B) - MATRIX_KEY(0x00, 0x04, KEY_F10) - MATRIX_KEY(0x00, 0x06, KEY_N) - MATRIX_KEY(0x00, 0x08, KEY_EQUAL) - MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT) - - MATRIX_KEY(0x01, 0x01, KEY_ESC) - MATRIX_KEY(0x01, 0x02, KEY_F4) - MATRIX_KEY(0x01, 0x03, KEY_G) - MATRIX_KEY(0x01, 0x04, KEY_F7) - MATRIX_KEY(0x01, 0x06, KEY_H) - MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) - MATRIX_KEY(0x01, 0x09, KEY_F9) - MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) - - MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) - MATRIX_KEY(0x02, 0x01, KEY_TAB) - MATRIX_KEY(0x02, 0x02, KEY_F3) - MATRIX_KEY(0x02, 0x03, KEY_T) - MATRIX_KEY(0x02, 0x04, KEY_F6) - MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE) - MATRIX_KEY(0x02, 0x06, KEY_Y) - MATRIX_KEY(0x02, 0x07, KEY_102ND) - MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) - MATRIX_KEY(0x02, 0x09, KEY_F8) - - MATRIX_KEY(0x03, 0x01, KEY_GRAVE) - MATRIX_KEY(0x03, 0x02, KEY_F2) - MATRIX_KEY(0x03, 0x03, KEY_5) - MATRIX_KEY(0x03, 0x04, KEY_F5) - MATRIX_KEY(0x03, 0x06, KEY_6) - MATRIX_KEY(0x03, 0x08, KEY_MINUS) - MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) - - MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) - MATRIX_KEY(0x04, 0x01, KEY_A) - MATRIX_KEY(0x04, 0x02, KEY_D) - MATRIX_KEY(0x04, 0x03, KEY_F) - MATRIX_KEY(0x04, 0x04, KEY_S) - MATRIX_KEY(0x04, 0x05, KEY_K) - MATRIX_KEY(0x04, 0x06, KEY_J) - MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON) - MATRIX_KEY(0x04, 0x09, KEY_L) - MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH) - MATRIX_KEY(0x04, 0x0b, KEY_ENTER) - - MATRIX_KEY(0x05, 0x01, KEY_Z) - MATRIX_KEY(0x05, 0x02, KEY_C) - MATRIX_KEY(0x05, 0x03, KEY_V) - MATRIX_KEY(0x05, 0x04, KEY_X) - MATRIX_KEY(0x05, 0x05, KEY_COMMA) - MATRIX_KEY(0x05, 0x06, KEY_M) - MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT) - MATRIX_KEY(0x05, 0x08, KEY_SLASH) - MATRIX_KEY(0x05, 0x09, KEY_DOT) - MATRIX_KEY(0x05, 0x0b, KEY_SPACE) - - MATRIX_KEY(0x06, 0x01, KEY_1) - MATRIX_KEY(0x06, 0x02, KEY_3) - MATRIX_KEY(0x06, 0x03, KEY_4) - MATRIX_KEY(0x06, 0x04, KEY_2) - MATRIX_KEY(0x06, 0x05, KEY_8) - MATRIX_KEY(0x06, 0x06, KEY_7) - MATRIX_KEY(0x06, 0x08, KEY_0) - MATRIX_KEY(0x06, 0x09, KEY_9) - MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT) - MATRIX_KEY(0x06, 0x0b, KEY_DOWN) - MATRIX_KEY(0x06, 0x0c, KEY_RIGHT) - - MATRIX_KEY(0x07, 0x01, KEY_Q) - MATRIX_KEY(0x07, 0x02, KEY_E) - MATRIX_KEY(0x07, 0x03, KEY_R) - MATRIX_KEY(0x07, 0x04, KEY_W) - MATRIX_KEY(0x07, 0x05, KEY_I) - MATRIX_KEY(0x07, 0x06, KEY_U) - MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT) - MATRIX_KEY(0x07, 0x08, KEY_P) - MATRIX_KEY(0x07, 0x09, KEY_O) - MATRIX_KEY(0x07, 0x0b, KEY_UP) - MATRIX_KEY(0x07, 0x0c, KEY_LEFT) - >; + i2c-tunnel { + compatible = "google,cros-ec-i2c-tunnel"; + #address-cells = <1>; + #size-cells = <0>; + + google,remote-bus = <0>; + + charger: bq24735@9 { + compatible = "ti,bq24735"; + reg = <0x9>; + interrupt-parent = <&gpio>; + interrupts = ; + ti,ac-detect-gpios = <&gpio + TEGRA_GPIO(J, 0) + GPIO_ACTIVE_HIGH>; + }; + + battery: sbs-battery@b { + compatible = "sbs,sbs-battery"; + reg = <0xb>; + sbs,i2c-retry-count = <2>; + sbs,poll-retry-count = <1>; + }; }; }; }; @@ -940,6 +874,10 @@ pmc@0,7000e400 { nvidia,sys-clock-req-active-high; }; + hda@0,70030000 { + status = "okay"; + }; + sdhci@0,700b0400 { cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; @@ -1205,3 +1143,5 @@ sound { clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; + +#include "cros-ec-keyboard.dtsi" diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index 6e6bc4e8185c3e836b8a09b0ce5c90f135f9f118..03916efd6fa98748f6d183cfda94280cf6ceeedb 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -1,6 +1,7 @@ #include #include #include +#include #include #include "skeleton.dtsi" @@ -102,6 +103,21 @@ gic: interrupt-controller@0,50041000 { (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; + gpu@0,57000000 { + compatible = "nvidia,gk20a"; + reg = <0x0 0x57000000 0x0 0x01000000>, + <0x0 0x58000000 0x0 0x01000000>; + interrupts = , + ; + interrupt-names = "stall", "nonstall"; + clocks = <&tegra_car TEGRA124_CLK_GPU>, + <&tegra_car TEGRA124_CLK_PLL_P_OUT5>; + clock-names = "gpu", "pwr"; + resets = <&tegra_car 184>; + reset-names = "gpu"; + status = "disabled"; + }; + timer@0,60005000 { compatible = "nvidia,tegra124-timer", "nvidia,tegra20-timer"; reg = <0x0 0x60005000 0x0 0x400>; @@ -179,6 +195,12 @@ apbdma: dma@0,60020000 { #dma-cells = <1>; }; + apbmisc@0,70000800 { + compatible = "nvidia,tegra124-apbmisc", "nvidia,tegra20-apbmisc"; + reg = <0x0 0x70000800 0x0 0x64>, /* Chip revision */ + <0x0 0x7000E864 0x0 0x04>; /* Strapping options */ + }; + pinmux: pinmux@0,70000868 { compatible = "nvidia,tegra124-pinmux"; reg = <0x0 0x70000868 0x0 0x164>, /* Pad control registers */ @@ -449,6 +471,39 @@ pmc@0,7000e400 { clock-names = "pclk", "clk32k_in"; }; + fuse@0,7000f800 { + compatible = "nvidia,tegra124-efuse"; + reg = <0x0 0x7000f800 0x0 0x400>; + clocks = <&tegra_car TEGRA124_CLK_FUSE>; + clock-names = "fuse"; + resets = <&tegra_car 39>; + reset-names = "fuse"; + }; + + hda@0,70030000 { + compatible = "nvidia,tegra124-hda", "nvidia,tegra30-hda"; + reg = <0x0 0x70030000 0x0 0x10000>; + interrupts = ; + clocks = <&tegra_car TEGRA124_CLK_HDA>, + <&tegra_car TEGRA124_CLK_HDA2HDMI>, + <&tegra_car TEGRA124_CLK_HDA2CODEC_2X>; + clock-names = "hda", "hda2hdmi", "hdacodec_2x"; + resets = <&tegra_car 125>, /* hda */ + <&tegra_car 128>, /* hda2hdmi */ + <&tegra_car 111>; /* hda2codec_2x */ + reset-names = "hda", "hda2hdmi", "hdacodec_2x"; + status = "disabled"; + }; + + padctl: padctl@0,7009f000 { + compatible = "nvidia,tegra124-xusb-padctl"; + reg = <0x0 0x7009f000 0x0 0x1000>; + resets = <&tegra_car 142>; + reset-names = "padctl"; + + #phy-cells = <1>; + }; + sdhci@0,700b0000 { compatible = "nvidia,tegra124-sdhci"; reg = <0x0 0x700b0000 0x0 0x200>; @@ -613,6 +668,8 @@ phy1: usb-phy@0,7d000000 { <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -647,6 +704,8 @@ phy2: usb-phy@0,7d004000 { <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -657,6 +716,7 @@ phy2: usb-phy@0,7d004000 { nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; nvidia,xcvr-hsslew = <12>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -681,6 +741,8 @@ phy3: usb-phy@0,7d008000 { <&tegra_car TEGRA124_CLK_PLL_U>, <&tegra_car TEGRA124_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index f45aad688d9b5296239795860231de5d3340eab1..a37279af687c6a436ba5308c6139a5c3c8be9014 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -562,10 +562,14 @@ pmc@7000e400 { }; pcie-controller@80003000 { - pex-clk-supply = <&pci_clk_reg>; - vdd-supply = <&pci_vdd_reg>; status = "okay"; + avdd-pex-supply = <&pci_vdd_reg>; + vdd-pex-supply = <&pci_vdd_reg>; + avdd-pex-pll-supply = <&pci_vdd_reg>; + avdd-plle-supply = <&pci_vdd_reg>; + vddio-pex-clk-supply = <&pci_clk_reg>; + pci@1,0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index 6d3a4cbc36cc358ecdac0313283078e0d1fd4545..1b7c56b33acae6f2c6c4b1da3154d6c92aebb96a 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -10,6 +10,15 @@ pwm@7000a000 { status = "okay"; }; + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + }; + i2c@7000c000 { wm8903: wm8903@1a { compatible = "wlf,wm8903"; @@ -30,7 +39,7 @@ wm8903: wm8903@1a { }; }; - backlight { + backlight: backlight { compatible = "pwm-backlight"; pwms = <&pwm 0 5000000>; @@ -38,6 +47,15 @@ backlight { default-brightness-level = <6>; }; + panel: panel { + compatible = "innolux,n156bge-l21", "simple-panel"; + + power-supply = <&vdd_1v8_reg>, <&vdd_3v3_reg>; + enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; + + backlight = <&backlight>; + }; + sound { compatible = "ad,tegra-audio-wm8903-medcom-wide", "nvidia,tegra-audio-wm8903"; @@ -64,4 +82,45 @@ sound { <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + regulators { + vcc_24v_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "vcc_24v"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + regulator-always-on; + }; + + vdd_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "vdd_5v0"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_3v3_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "vdd_3v3"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_1v8_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "vdd_1v8"; + vin-supply = <&vdd_3v3_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index 9a39a8001f7845fb75572e97a7a8554399af9d81..d4438e30de456c70047457f6ee974ac31a6f686f 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -296,7 +296,7 @@ nvec@7000c500 { request-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; slave-addr = <138>; clocks = <&tegra_car TEGRA20_CLK_I2C3>, - <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; + <&tegra_car TEGRA20_CLK_PLL_P_OUT3>; clock-names = "div-clk", "fast-clk"; resets = <&tegra_car 67>; reset-names = "i2c"; @@ -589,8 +589,8 @@ sound { GPIO_ACTIVE_HIGH>; clocks = <&tegra_car TEGRA20_CLK_PLL_A>, - <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA20_CLK_CDEV1>; + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; }; diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts index 29051a2ae0aed6194c77e1a5e323fd88484e3b57..a10b415bbdee1e2f8391290dc355bb9405cf9774 100644 --- a/arch/arm/boot/dts/tegra20-plutux.dts +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -58,4 +58,45 @@ sound { <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + regulators { + vcc_24v_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "vcc_24v"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + regulator-always-on; + }; + + vdd_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "vdd_5v0"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_3v3_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "vdd_3v3"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_1v8_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "vdd_1v8"; + vin-supply = <&vdd_3v3_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index a1b0d965757f49a757b9dd4b88e4b427b236a8a9..80e7d386ce3452e3776e70771233eea336a81e98 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -334,6 +334,7 @@ pmic: tps6586x@34 { #gpio-cells = <2>; gpio-controller; + /* vdd_5v0_reg must be provided by the base board */ sys-supply = <&vdd_5v0_reg>; vin-sm0-supply = <&sys_reg>; vin-sm1-supply = <&sys_reg>; @@ -473,8 +474,11 @@ pmc@7000e400 { }; pcie-controller@80003000 { - pex-clk-supply = <&pci_clk_reg>; - vdd-supply = <&pci_vdd_reg>; + avdd-pex-supply = <&pci_vdd_reg>; + vdd-pex-supply = <&pci_vdd_reg>; + avdd-pex-pll-supply = <&pci_vdd_reg>; + avdd-plle-supply = <&pci_vdd_reg>; + vddio-pex-clk-supply = <&pci_clk_reg>; }; usb@c5008000 { @@ -511,15 +515,6 @@ regulators { #address-cells = <1>; #size-cells = <0>; - vdd_5v0_reg: regulator@0 { - compatible = "regulator-fixed"; - reg = <0>; - regulator-name = "vdd_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - regulator-always-on; - }; - pci_vdd_reg: regulator@1 { compatible = "regulator-fixed"; reg = <1>; diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index 890562c667fbee28b6713e0f5f74314ad98e8470..c12d8bead2eea89beccb58be81cdad22336d2b08 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -67,4 +67,45 @@ sound { <&tegra_car TEGRA20_CLK_CDEV1>; clock-names = "pll_a", "pll_a_out0", "mclk"; }; + + regulators { + vcc_24v_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "vcc_24v"; + regulator-min-microvolt = <24000000>; + regulator-max-microvolt = <24000000>; + regulator-always-on; + }; + + vdd_5v0_reg: regulator@101 { + compatible = "regulator-fixed"; + reg = <101>; + regulator-name = "vdd_5v0"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_3v3_reg: regulator@102 { + compatible = "regulator-fixed"; + reg = <102>; + regulator-name = "vdd_3v3"; + vin-supply = <&vcc_24v_reg>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vdd_1v8_reg: regulator@103 { + compatible = "regulator-fixed"; + reg = <103>; + regulator-name = "vdd_1v8"; + vin-supply = <&vdd_3v3_reg>; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; }; diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 216fa6d50c65439f86d6049a089ee0396c68ec09..5ad87979ab13ff68527f3b6c8a1ba9bb51e2bda5 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -318,8 +318,12 @@ pmc@7000e400 { pcie-controller@80003000 { status = "okay"; - pex-clk-supply = <&pci_clk_reg>; - vdd-supply = <&pci_vdd_reg>; + + avdd-pex-supply = <&pci_vdd_reg>; + vdd-pex-supply = <&pci_vdd_reg>; + avdd-pex-pll-supply = <&pci_vdd_reg>; + avdd-plle-supply = <&pci_vdd_reg>; + vddio-pex-clk-supply = <&pci_clk_reg>; pci@1,0 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index a7ddf70df50b428012b1d6fdb8dd5b018f1b73a8..1908f6937e53246c1d2f0225a7b658ce1452f3d5 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -236,6 +236,12 @@ gpio: gpio@6000d000 { interrupt-controller; }; + apbmisc@70000800 { + compatible = "nvidia,tegra20-apbmisc"; + reg = <0x70000800 0x64 /* Chip revision */ + 0x70000008 0x04>; /* Strapping options */ + }; + pinmux: pinmux@70000014 { compatible = "nvidia,tegra20-pinmux"; reg = <0x70000014 0x10 /* Tri-state registers */ @@ -545,6 +551,15 @@ memory-controller@7000f400 { #size-cells = <0>; }; + fuse@7000f800 { + compatible = "nvidia,tegra20-efuse"; + reg = <0x7000F800 0x400>; + clocks = <&tegra_car TEGRA20_CLK_FUSE>; + clock-names = "fuse"; + resets = <&tegra_car 39>; + reset-names = "fuse"; + }; + pcie-controller@80003000 { compatible = "nvidia,tegra20-pcie"; device_type = "pci"; @@ -630,6 +645,8 @@ phy1: usb-phy@c5000000 { <&tegra_car TEGRA20_CLK_CLK_M>, <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,has-legacy-mode; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; @@ -638,6 +655,7 @@ phy1: usb-phy@c5000000 { nvidia,xcvr-setup = <9>; nvidia,xcvr-lsfslew = <1>; nvidia,xcvr-lsrslew = <1>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -661,6 +679,8 @@ phy2: usb-phy@c5004000 { <&tegra_car TEGRA20_CLK_PLL_U>, <&tegra_car TEGRA20_CLK_CDEV2>; clock-names = "reg", "pll_u", "ulpi-link"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; status = "disabled"; }; @@ -685,6 +705,8 @@ phy3: usb-phy@c5008000 { <&tegra_car TEGRA20_CLK_CLK_M>, <&tegra_car TEGRA20_CLK_USBD>; clock-names = "reg", "pll_u", "timer", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/tegra30-apalis-eval.dts b/arch/arm/boot/dts/tegra30-apalis-eval.dts new file mode 100644 index 0000000000000000000000000000000000000000..45d40f024585d95a53928e36d351db05aa514592 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-apalis-eval.dts @@ -0,0 +1,260 @@ +/dts-v1/; + +#include +#include "tegra30-apalis.dtsi" + +/ { + model = "Toradex Apalis T30 on Apalis Evaluation Board"; + compatible = "toradex,apalis_t30-eval", "toradex,apalis_t30", "nvidia,tegra30"; + + aliases { + rtc0 = "/i2c@7000c000/rtc@68"; + rtc1 = "/i2c@7000d000/tps65911@2d"; + rtc2 = "/rtc@7000e000"; + }; + + pcie-controller@00003000 { + status = "okay"; + + pci@1,0 { + status = "okay"; + }; + + pci@2,0 { + status = "okay"; + }; + + pci@3,0 { + status = "okay"; + }; + }; + + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + nvidia,panel = <&panel>; + }; + }; + hdmi@54280000 { + status = "okay"; + }; + }; + + serial@70006000 { + status = "okay"; + }; + + serial@70006040 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + serial@70006200 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + serial@70006300 { + compatible = "nvidia,tegra30-hsuart"; + status = "okay"; + }; + + pwm@7000a000 { + status = "okay"; + }; + + /* + * GEN1_I2C: I2C1_SDA/SCL on MXM3 pin 209/211 (e.g. RTC on carrier + * board) + */ + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + + pcie-switch@58 { + compatible = "plx,pex8605"; + reg = <0x58>; + }; + + /* M41T0M6 real time clock on carrier board */ + rtc@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; + }; + + /* GEN2_I2C: unused */ + + /* + * CAM_I2C: I2C3_SDA/SCL on MXM3 pin 201/203 (e.g. camera sensor on + * carrier board) + */ + cami2c: i2c@7000c500 { + status = "okay"; + clock-frequency = <400000>; + }; + + /* DDC: I2C2_SDA/SCL on MXM3 pin 205/207 (e.g. display EDID) */ + hdmiddc: i2c@7000c700 { + status = "okay"; + }; + + /* SPI1: Apalis SPI1 */ + spi@7000d400 { + status = "okay"; + spi-max-frequency = <25000000>; + spidev0: spidev@1 { + compatible = "spidev"; + reg = <1>; + spi-max-frequency = <25000000>; + }; + }; + + /* SPI5: Apalis SPI2 */ + spi@7000dc00 { + status = "okay"; + spi-max-frequency = <25000000>; + spidev1: spidev@2 { + compatible = "spidev"; + reg = <2>; + spi-max-frequency = <25000000>; + }; + }; + + sd1: sdhci@78000000 { + status = "okay"; + bus-width = <4>; + /* SD1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(CC, 5) GPIO_ACTIVE_LOW>; + no-1-8-v; + }; + + mmc1: sdhci@78000400 { + status = "okay"; + bus-width = <8>; + /* MMC1_CD# */ + cd-gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>; + no-1-8-v; + }; + + /* EHCI instance 0: USB1_DP/N -> USBO1_DP/N */ + usb@7d000000 { + status = "okay"; + }; + + usb-phy@7d000000 { + status = "okay"; + vbus-supply = <&usbo1_vbus_reg>; + }; + + /* EHCI instance 1: USB2_DP/N -> USBH2_DP/N */ + usb@7d004000 { + status = "okay"; + }; + + usb-phy@7d004000 { + status = "okay"; + vbus-supply = <&usbh_vbus_reg>; + }; + + /* EHCI instance 2: USB3_DP/N -> USBH3_DP/N */ + usb@7d008000 { + status = "okay"; + }; + + usb-phy@7d008000 { + status = "okay"; + vbus-supply = <&usbh_vbus_reg>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + + /* PWM0 */ + pwms = <&pwm 0 5000000>; + brightness-levels = <255 231 223 207 191 159 127 0>; + default-brightness-level = <6>; + /* BKL1_ON */ + enable-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(V, 1) GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + panel: panel { + /* + * edt,et057090dhu: EDT 5.7" LCD TFT + * edt,et070080dh6: EDT 7.0" LCD TFT + */ + compatible = "edt,et057090dhu", "simple-panel"; + + backlight = <&backlight>; + }; + + pwmleds { + compatible = "pwm-leds"; + + pwm1 { + label = "PWM1"; + pwms = <&pwm 3 19600>; + max-brightness = <255>; + }; + + pwm2 { + label = "PWM2"; + pwms = <&pwm 2 19600>; + max-brightness = <255>; + }; + + pwm3 { + label = "PWM3"; + pwms = <&pwm 1 19600>; + max-brightness = <255>; + }; + }; + + regulators { + sys_5v0_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + /* USBO1_EN */ + usbo1_vbus_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "usbo1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(T, 5) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&sys_5v0_reg>; + }; + + /* USBH_EN */ + usbh_vbus_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "usbh_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio TEGRA_GPIO(DD, 1) GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <&sys_5v0_reg>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-apalis.dtsi b/arch/arm/boot/dts/tegra30-apalis.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..8adaa7871dd361cf17ac212a79b7d3333c410010 --- /dev/null +++ b/arch/arm/boot/dts/tegra30-apalis.dtsi @@ -0,0 +1,678 @@ +#include "tegra30.dtsi" + +/* + * Toradex Apalis T30 Device Tree + * Compatible for Revisions 1GB: V1.0A; 2GB: V1.0B, V1.0C + */ +/ { + model = "Toradex Apalis T30"; + compatible = "toradex,apalis_t30", "nvidia,tegra30"; + + pcie-controller@00003000 { + avdd-pexa-supply = <&vdd2_reg>; + vdd-pexa-supply = <&vdd2_reg>; + avdd-pexb-supply = <&vdd2_reg>; + vdd-pexb-supply = <&vdd2_reg>; + avdd-pex-pll-supply = <&vdd2_reg>; + avdd-plle-supply = <&ldo6_reg>; + vddio-pex-ctl-supply = <&sys_3v3_reg>; + hvdd-pex-supply = <&sys_3v3_reg>; + + pci@1,0 { + nvidia,num-lanes = <4>; + }; + + pci@2,0 { + nvidia,num-lanes = <1>; + }; + + pci@3,0 { + nvidia,num-lanes = <1>; + }; + }; + + host1x@50000000 { + hdmi@54280000 { + vdd-supply = <&sys_3v3_reg>; + pll-supply = <&vio_reg>; + + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + nvidia,ddc-i2c-bus = <&hdmiddc>; + }; + }; + + pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + /* Apalis BKL1_ON */ + pv2 { + nvidia,pins = "pv2"; + nvidia,function = "rsvd4"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis BKL1_PWM */ + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0"; + nvidia,function = "pwm0"; + nvidia,pull = ; + nvidia,tristate = ; + }; + /* BKL1_PWM_EN#, disable TPS65911 PMIC PWM backlight */ + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis CAN1 on SPI6 */ + spi2_cs0_n_px3 { + nvidia,pins = "spi2_cs0_n_px3", + "spi2_miso_px1", + "spi2_mosi_px0", + "spi2_sck_px2"; + nvidia,function = "spi6"; + nvidia,pull = ; + nvidia,tristate = ; + }; + /* CAN_INT1 */ + spi2_cs1_n_pw2 { + nvidia,pins = "spi2_cs1_n_pw2"; + nvidia,function = "spi3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Apalis CAN2 on SPI4 */ + gmi_a16_pj7 { + nvidia,pins = "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7"; + nvidia,function = "spi4"; + nvidia,pull = ; + nvidia,tristate = ; + }; + /* CAN_INT2 */ + spi2_cs2_n_pw3 { + nvidia,pins = "spi2_cs2_n_pw3"; + nvidia,function = "spi3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Apalis I2C3 */ + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = ; + nvidia,open-drain = ; + }; + + /* Apalis MMC1 */ + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6", + "sdmmc3_cmd_pa7"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + }; + sdmmc3_dat0_pb7 { + nvidia,pins = "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_dat4_pd1", + "sdmmc3_dat5_pd0", + "sdmmc3_dat6_pd3", + "sdmmc3_dat7_pd4"; + nvidia,function = "sdmmc3"; + nvidia,pull = ; + nvidia,tristate = ; + }; + /* Apalis MMC1_CD# */ + pv3 { + nvidia,pins = "pv3"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Apalis PWM1 */ + gpio_pu6 { + nvidia,pins = "gpio_pu6"; + nvidia,function = "pwm3"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis PWM2 */ + gpio_pu5 { + nvidia,pins = "gpio_pu5"; + nvidia,function = "pwm2"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis PWM3 */ + gpio_pu4 { + nvidia,pins = "gpio_pu4"; + nvidia,function = "pwm1"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis PWM4 */ + gpio_pu3 { + nvidia,pins = "gpio_pu3"; + nvidia,function = "pwm0"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis RESET_MOCI# */ + gmi_rst_n_pi4 { + nvidia,pins = "gmi_rst_n_pi4"; + nvidia,function = "gmi"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis SD1 */ + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,pull = ; + nvidia,tristate = ; + }; + /* Apalis SD1_CD# */ + clk2_req_pcc5 { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Apalis SPI1 */ + spi1_sck_px5 { + nvidia,pins = "spi1_sck_px5", + "spi1_mosi_px4", + "spi1_miso_px7", + "spi1_cs0_n_px6"; + nvidia,function = "spi1"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis SPI2 */ + lcd_sck_pz4 { + nvidia,pins = "lcd_sck_pz4", + "lcd_sdout_pn5", + "lcd_sdin_pz2", + "lcd_cs0_n_pn4"; + nvidia,function = "spi5"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis UART1 */ + ulpi_data0 { + nvidia,pins = "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0"; + nvidia,function = "uarta"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis UART2 */ + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "uartd"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis UART3 */ + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3", + "uart2_txd_pc2"; + nvidia,function = "uartb"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis UART4 */ + uart3_rxd_pw7 { + nvidia,pins = "uart3_rxd_pw7", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis USBO1_EN */ + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5"; + nvidia,function = "rsvd4"; + nvidia,open-drain = ; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* Apalis USBO1_OC# */ + gen2_i2c_sda_pt6 { + nvidia,pins = "gen2_i2c_sda_pt6"; + nvidia,function = "rsvd4"; + nvidia,open-drain = ; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* Apalis WAKE1_MICO */ + pv1 { + nvidia,pins = "pv1"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* eMMC (On-module) */ + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + "sdmmc4_rst_n_pcc3"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = ; + nvidia,tristate = ; + }; + + /* LVDS Transceiver Configuration */ + pbb0 { + nvidia,pins = "pbb0", + "pbb7", + "pcc1", + "pcc2"; + nvidia,function = "rsvd2"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = ; + }; + pbb3 { + nvidia,pins = "pbb3", + "pbb4", + "pbb5", + "pbb6"; + nvidia,function = "displayb"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = ; + }; + + /* Power I2C (On-module) */ + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + nvidia,lock = ; + nvidia,open-drain = ; + }; + + /* + * THERMD_ALERT#, unlatched I2C address pin of LM95245 + * temperature sensor therefore requires disabling for + * now + */ + lcd_dc1_pd2 { + nvidia,pins = "lcd_dc1_pd2"; + nvidia,function = "rsvd3"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + + /* TOUCH_PEN_INT# */ + pv0 { + nvidia,pins = "pv0"; + nvidia,function = "rsvd1"; + nvidia,pull = ; + nvidia,tristate = ; + nvidia,enable-input = ; + }; + }; + }; + + hdmiddc: i2c@7000c700 { + clock-frequency = <100000>; + }; + + /* + * PWR_I2C: power I2C to audio codec, PMIC, temperature sensor and + * touch screen controller + */ + i2c@7000d000 { + status = "okay"; + clock-frequency = <100000>; + + pmic: tps65911@2d { + compatible = "ti,tps65911"; + reg = <0x2d>; + + interrupts = ; + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + #gpio-cells = <2>; + gpio-controller; + + vcc1-supply = <&sys_3v3_reg>; + vcc2-supply = <&sys_3v3_reg>; + vcc3-supply = <&vio_reg>; + vcc4-supply = <&sys_3v3_reg>; + vcc5-supply = <&sys_3v3_reg>; + vcc6-supply = <&vio_reg>; + vcc7-supply = <&sys_5v0_reg>; + vccio-supply = <&sys_3v3_reg>; + + regulators { + /* SW1: +V1.35_VDDIO_DDR */ + vdd1_reg: vdd1 { + regulator-name = "vddio_ddr_1v35"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + }; + + /* SW2: +V1.05 */ + vdd2_reg: vdd2 { + regulator-name = + "vdd_pexa,vdd_pexb,vdd_sata"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + /* SW CTRL: +V1.0_VDD_CPU */ + vddctrl_reg: vddctrl { + regulator-name = "vdd_cpu,vdd_sys"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + regulator-always-on; + }; + + /* SWIO: +V1.8 */ + vio_reg: vio { + regulator-name = "vdd_1v8_gen"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + /* LDO1: unused */ + + /* + * EN_+V3.3 switching via FET: + * +V3.3_AUDIO_AVDD_S, +V3.3 and +V1.8_VDD_LAN + * see also v3_3 fixed supply + */ + ldo2_reg: ldo2 { + regulator-name = "en_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + /* +V1.2_CSI */ + ldo3_reg: ldo3 { + regulator-name = + "avdd_dsi_csi,pwrdet_mipi"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + /* +V1.2_VDD_RTC */ + ldo4_reg: ldo4 { + regulator-name = "vdd_rtc"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* + * +V2.8_AVDD_VDAC: + * only required for analog RGB + */ + ldo5_reg: ldo5 { + regulator-name = "avdd_vdac"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + /* + * +V1.05_AVDD_PLLE: avdd_plle should be 1.05V + * but LDO6 can't set voltage in 50mV + * granularity + */ + ldo6_reg: ldo6 { + regulator-name = "avdd_plle"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + }; + + /* +V1.2_AVDD_PLL */ + ldo7_reg: ldo7 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + /* +V1.0_VDD_DDR_HS */ + ldo8_reg: ldo8 { + regulator-name = "vdd_ddr_hs"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + }; + }; + + /* STMPE811 touch screen controller */ + stmpe811@41 { + compatible = "st,stmpe811"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x41>; + interrupts = ; + interrupt-parent = <&gpio>; + interrupt-controller; + id = <0>; + blocks = <0x5>; + irq-trigger = <0x1>; + + stmpe_touchscreen { + compatible = "st,stmpe-ts"; + reg = <0>; + /* 3.25 MHz ADC clock speed */ + st,adc-freq = <1>; + /* 8 sample average control */ + st,ave-ctrl = <3>; + /* 7 length fractional part in z */ + st,fraction-z = <7>; + /* + * 50 mA typical 80 mA max touchscreen drivers + * current limit value + */ + st,i-drive = <1>; + /* 12-bit ADC */ + st,mod-12b = <1>; + /* internal ADC reference */ + st,ref-sel = <0>; + /* ADC converstion time: 80 clocks */ + st,sample-time = <4>; + /* 1 ms panel driver settling time */ + st,settling = <3>; + /* 5 ms touch detect interrupt delay */ + st,touch-det-delay = <5>; + }; + }; + + /* + * LM95245 temperature sensor + * Note: OVERT_N directly connected to PMIC PWRDN + */ + temp-sensor@4c { + compatible = "national,lm95245"; + reg = <0x4c>; + }; + + /* SW: +V1.2_VDD_CORE */ + tps62362@60 { + compatible = "ti,tps62362"; + reg = <0x60>; + + regulator-name = "tps62362-vout"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1400000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-low; + /* VSEL1: EN_CORE_DVFS_N low for DVFS */ + ti,vsel1-state-low; + }; + }; + + /* SPI4: CAN2 */ + spi@7000da00 { + status = "okay"; + spi-max-frequency = <10000000>; + + can@1 { + compatible = "microchip,mcp2515"; + reg = <1>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + interrupts = ; + spi-max-frequency = <10000000>; + }; + }; + + /* SPI6: CAN1 */ + spi@7000de00 { + status = "okay"; + spi-max-frequency = <10000000>; + + can@0 { + compatible = "microchip,mcp2515"; + reg = <0>; + clocks = <&clk16m>; + interrupt-parent = <&gpio>; + interrupts = ; + spi-max-frequency = <10000000>; + }; + }; + + pmc@7000e400 { + nvidia,invert-interrupt; + nvidia,suspend-mode = <1>; + nvidia,cpu-pwr-good-time = <5000>; + nvidia,cpu-pwr-off-time = <5000>; + nvidia,core-pwr-good-time = <3845 3845>; + nvidia,core-pwr-off-time = <0>; + nvidia,core-power-req-active-high; + nvidia,sys-clock-req-active-high; + }; + + sdhci@78000600 { + status = "okay"; + bus-width = <8>; + non-removable; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clk@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + clk16m: clk@1 { + compatible = "fixed-clock"; + reg=<1>; + #clock-cells = <0>; + clock-frequency = <16000000>; + clock-output-names = "clk16m"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sys_3v3_reg: regulator@100 { + compatible = "regulator-fixed"; + reg = <100>; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 3189791a92897654701118ed2733432dceba57dd..cee8f2246fdb2467fbde27bae612a0752d7f6da2 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -17,9 +17,15 @@ memory { pcie-controller@00003000 { status = "okay"; - pex-clk-supply = <&sys_3v3_pexs_reg>; - vdd-supply = <&ldo1_reg>; - avdd-supply = <&ldo2_reg>; + + avdd-pexa-supply = <&ldo1_reg>; + vdd-pexa-supply = <&ldo1_reg>; + avdd-pexb-supply = <&ldo1_reg>; + vdd-pexb-supply = <&ldo1_reg>; + avdd-pex-pll-supply = <&ldo1_reg>; + avdd-plle-supply = <&ldo1_reg>; + vddio-pex-ctl-supply = <&sys_3v3_reg>; + hvdd-pex-supply = <&sys_3v3_pexs_reg>; pci@1,0 { status = "okay"; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 0cf0848a82d88964ddd0ed72fca19aa5c6cb135a..20637954624425795453cc78699e674276de5430 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -38,9 +38,14 @@ memory { pcie-controller@00003000 { status = "okay"; - pex-clk-supply = <&pex_hvdd_3v3_reg>; - vdd-supply = <&ldo1_reg>; - avdd-supply = <&ldo2_reg>; + + /* AVDD_PEXA and VDD_PEXA inputs are grounded on Cardhu. */ + avdd-pexb-supply = <&ldo1_reg>; + vdd-pexb-supply = <&ldo1_reg>; + avdd-pex-pll-supply = <&ldo1_reg>; + hvdd-pex-supply = <&pex_hvdd_3v3_reg>; + vddio-pex-ctl-supply = <&sys_3v3_reg>; + avdd-plle-supply = <&ldo2_reg>; pci@1,0 { nvidia,num-lanes = <4>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index dec4fc8239017e3ad78fd94a4440265986494527..6b35c29278d7623530e3945a12bc1fbb62a8e470 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -335,6 +335,12 @@ gpio: gpio@6000d000 { interrupt-controller; }; + apbmisc@70000800 { + compatible = "nvidia,tegra30-apbmisc", "nvidia,tegra20-apbmisc"; + reg = <0x70000800 0x64 /* Chip revision */ + 0x70000008 0x04>; /* Strapping options */ + }; + pinmux: pinmux@70000868 { compatible = "nvidia,tegra30-pinmux"; reg = <0x70000868 0xd4 /* Pad control registers */ @@ -631,6 +637,15 @@ iommu@7000f010 { nvidia,ahb = <&ahb>; }; + fuse@7000f800 { + compatible = "nvidia,tegra30-efuse"; + reg = <0x7000f800 0x400>; + clocks = <&tegra_car TEGRA30_CLK_FUSE>; + clock-names = "fuse"; + resets = <&tegra_car 39>; + reset-names = "fuse"; + }; + ahub@70080000 { compatible = "nvidia,tegra30-ahub"; reg = <0x70080000 0x200 @@ -775,6 +790,8 @@ phy1: usb-phy@7d000000 { <&tegra_car TEGRA30_CLK_PLL_U>, <&tegra_car TEGRA30_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 22>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -786,6 +803,7 @@ phy1: usb-phy@7d000000 { nvidia,xcvr-hsslew = <32>; nvidia,hssquelch-level = <2>; nvidia,hsdiscon-level = <5>; + nvidia,has-utmi-pad-registers; status = "disabled"; }; @@ -809,6 +827,8 @@ phy2: usb-phy@7d004000 { <&tegra_car TEGRA30_CLK_PLL_U>, <&tegra_car TEGRA30_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 58>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <9>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; @@ -843,6 +863,8 @@ phy3: usb-phy@7d008000 { <&tegra_car TEGRA30_CLK_PLL_U>, <&tegra_car TEGRA30_CLK_USBD>; clock-names = "reg", "pll_u", "utmi-pads"; + resets = <&tegra_car 59>, <&tegra_car 22>; + reset-names = "usb", "utmi-pads"; nvidia,hssync-start-delay = <0>; nvidia,idle-wait-delay = <17>; nvidia,elastic-limit = <16>; diff --git a/arch/arm/boot/dts/tny_a9260_common.dtsi b/arch/arm/boot/dts/tny_a9260_common.dtsi index 0e6d3de2e09ed5056adbac96aaedab9f00bb5b85..ce7138c3af1bd852035eb2c00b7daf1e85b7ca85 100644 --- a/arch/arm/boot/dts/tny_a9260_common.dtsi +++ b/arch/arm/boot/dts/tny_a9260_common.dtsi @@ -24,6 +24,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/tny_a9263.dts b/arch/arm/boot/dts/tny_a9263.dts index 0751a6a979a8e9575d85a67999497ae65dc7e4f4..3043296345b767525a6e7388ceb1b1cb43d4c862 100644 --- a/arch/arm/boot/dts/tny_a9263.dts +++ b/arch/arm/boot/dts/tny_a9263.dts @@ -29,6 +29,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/usb_a9260_common.dtsi b/arch/arm/boot/dts/usb_a9260_common.dtsi index 285977682cf3f43b0aea162939637f95ed627d69..12edafefd44a3dfb17a5aae66a3fdeb3b8788679 100644 --- a/arch/arm/boot/dts/usb_a9260_common.dtsi +++ b/arch/arm/boot/dts/usb_a9260_common.dtsi @@ -16,6 +16,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/usb_a9263.dts b/arch/arm/boot/dts/usb_a9263.dts index 290e60383baf4f6a23862996b8c5ecb38d33a2b0..68c0de36c339f7662b7545e072a60762b82627db 100644 --- a/arch/arm/boot/dts/usb_a9263.dts +++ b/arch/arm/boot/dts/usb_a9263.dts @@ -29,6 +29,14 @@ main_clock: clock@0 { compatible = "atmel,osc", "fixed-clock"; clock-frequency = <12000000>; }; + + slow_xtal { + clock-frequency = <32768>; + }; + + main_xtal { + clock-frequency = <12000000>; + }; }; ahb { diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts index e01e5a081def6fd6d47619461ae7da851ed4af29..27d0d9c8adf3da724d9e64ba2e5229731a0b38eb 100644 --- a/arch/arm/boot/dts/versatile-ab.dts +++ b/arch/arm/boot/dts/versatile-ab.dts @@ -15,10 +15,49 @@ aliases { i2c0 = &i2c0; }; + chosen { + stdout-path = &uart0; + }; + memory { reg = <0x0 0x08000000>; }; + xtal24mhz: xtal24mhz@24M { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + core-module@10000000 { + compatible = "arm,core-module-versatile", "syscon"; + reg = <0x10000000 0x200>; + + /* OSC1 on AB, OSC4 on PB */ + osc1: cm_aux_osc@24M { + #clock-cells = <0>; + compatible = "arm,versatile-cm-auxosc"; + clocks = <&xtal24mhz>; + }; + + /* The timer clock is the 24 MHz oscillator divided to 1MHz */ + timclk: timclk@1M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <24>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + + pclk: pclk@24M { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <1>; + clock-mult = <1>; + clocks = <&xtal24mhz>; + }; + }; + flash@34000000 { compatible = "arm,versatile-flash"; reg = <0x34000000 0x4000000>; @@ -59,6 +98,8 @@ vic: intc@10140000 { interrupt-controller; #interrupt-cells = <1>; reg = <0x10140000 0x1000>; + clear-mask = <0xffffffff>; + valid-mask = <0xffffffff>; }; sic: intc@10003000 { @@ -68,69 +109,93 @@ sic: intc@10003000 { reg = <0x10003000 0x1000>; interrupt-parent = <&vic>; interrupts = <31>; /* Cascaded to vic */ + clear-mask = <0xffffffff>; + valid-mask = <0xffc203f8>; }; dma@10130000 { compatible = "arm,pl081", "arm,primecell"; reg = <0x10130000 0x1000>; interrupts = <17>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; uart0: uart@101f1000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101f1000 0x1000>; interrupts = <12>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; uart1: uart@101f2000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101f2000 0x1000>; interrupts = <13>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; uart2: uart@101f3000 { compatible = "arm,pl011", "arm,primecell"; reg = <0x101f3000 0x1000>; interrupts = <14>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; smc@10100000 { compatible = "arm,primecell"; reg = <0x10100000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; mpmc@10110000 { compatible = "arm,primecell"; reg = <0x10110000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; display@10120000 { compatible = "arm,pl110", "arm,primecell"; reg = <0x10120000 0x1000>; interrupts = <16>; + clocks = <&osc1>, <&pclk>; + clock-names = "clcd", "apb_pclk"; }; sctl@101e0000 { compatible = "arm,primecell"; reg = <0x101e0000 0x1000>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; watchdog@101e1000 { compatible = "arm,primecell"; reg = <0x101e1000 0x1000>; interrupts = <0>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; timer@101e2000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x101e2000 0x1000>; interrupts = <4>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer0", "timer1", "apb_pclk"; }; timer@101e3000 { compatible = "arm,sp804", "arm,primecell"; reg = <0x101e3000 0x1000>; interrupts = <5>; + clocks = <&timclk>, <&timclk>, <&pclk>; + clock-names = "timer0", "timer1", "apb_pclk"; }; gpio0: gpio@101e4000 { @@ -141,6 +206,8 @@ gpio0: gpio@101e4000 { #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpio1: gpio@101e5000 { @@ -151,24 +218,32 @@ gpio1: gpio@101e5000 { #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; rtc@101e8000 { compatible = "arm,pl030", "arm,primecell"; reg = <0x101e8000 0x1000>; interrupts = <10>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; sci@101f0000 { compatible = "arm,primecell"; reg = <0x101f0000 0x1000>; interrupts = <15>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; ssp@101f4000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x101f4000 0x1000>; interrupts = <11>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "SSPCLK", "apb_pclk"; }; fpga { @@ -181,23 +256,31 @@ aaci@4000 { compatible = "arm,primecell"; reg = <0x4000 0x1000>; interrupts = <24>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; mmc@5000 { - compatible = "arm,primecell"; + compatible = "arm,pl180", "arm,primecell"; reg = < 0x5000 0x1000>; interrupts-extended = <&vic 22 &sic 2>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "mclk", "apb_pclk"; }; kmi@6000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x6000 0x1000>; interrupt-parent = <&sic>; interrupts = <3>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; kmi@7000 { compatible = "arm,pl050", "arm,primecell"; reg = <0x7000 0x1000>; interrupt-parent = <&sic>; interrupts = <4>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "KMIREFCLK", "apb_pclk"; }; }; }; diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts index 65f6577113235749c3635dc30d321fa3c775b1c0..e36c1e82fea74d62f7efb7cc3c3585597abd78c2 100644 --- a/arch/arm/boot/dts/versatile-pb.dts +++ b/arch/arm/boot/dts/versatile-pb.dts @@ -13,6 +13,8 @@ gpio2: gpio@101e6000 { #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; gpio3: gpio@101e7000 { @@ -23,6 +25,8 @@ gpio3: gpio@101e7000 { #gpio-cells = <2>; interrupt-controller; #interrupt-cells = <2>; + clocks = <&pclk>; + clock-names = "apb_pclk"; }; fpga { @@ -31,20 +35,24 @@ uart@9000 { reg = <0x9000 0x1000>; interrupt-parent = <&sic>; interrupts = <6>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "uartclk", "apb_pclk"; }; sci@a000 { compatible = "arm,primecell"; reg = <0xa000 0x1000>; interrupt-parent = <&sic>; interrupts = <5>; + clocks = <&xtal24mhz>; + clock-names = "apb_pclk"; }; mmc@b000 { - compatible = "arm,primecell"; + compatible = "arm,pl180", "arm,primecell"; reg = <0xb000 0x1000>; interrupts-extended = <&vic 23 &sic 2>; + clocks = <&xtal24mhz>, <&pclk>; + clock-names = "mclk", "apb_pclk"; }; }; }; }; - -#include diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 6cc314e7b8fb7064af09b3d7d24d6f7ebbba714e..583dd363c9dc4e3c78a5f0c4a16bf20450998249 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -14,6 +14,8 @@ / { aliases { + can0 = &can0; + can1 = &can1; serial0 = &uart0; serial1 = &uart1; serial2 = &uart2; @@ -103,6 +105,16 @@ edma0: dma-controller@40018000 { <&clks VF610_CLK_DMAMUX1>; }; + can0: flexcan@40020000 { + compatible = "fsl,vf610-flexcan"; + reg = <0x40020000 0x4000>; + interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_FLEXCAN0>, + <&clks VF610_CLK_FLEXCAN0>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + uart0: serial@40027000 { compatible = "fsl,vf610-lpuart"; reg = <0x40027000 0x1000>; @@ -362,7 +374,7 @@ adc1: adc@400bb000 { esdhc1: esdhc@400b2000 { compatible = "fsl,imx53-esdhc"; - reg = <0x400b2000 0x4000>; + reg = <0x400b2000 0x1000>; interrupts = <0 28 0x04>; clocks = <&clks VF610_CLK_IPG_BUS>, <&clks VF610_CLK_PLATFORM_BUS>, @@ -405,6 +417,17 @@ fec1: ethernet@400d1000 { clock-names = "ipg", "ahb", "ptp"; status = "disabled"; }; + + can1: flexcan@400d4000 { + compatible = "fsl,vf610-flexcan"; + reg = <0x400d4000 0x4000>; + interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_FLEXCAN1>, + <&clks VF610_CLK_FLEXCAN1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + }; }; }; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 760bbc463c5b18afbfb60a7b3510d70f52e27547..6cc83d4c6c76100ebdc2863a28ae69d89f96fef9 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -65,6 +65,48 @@ amba { interrupt-parent = <&intc>; ranges; + adc@f8007100 { + compatible = "xlnx,zynq-xadc-1.00.a"; + reg = <0xf8007100 0x20>; + interrupts = <0 7 4>; + interrupt-parent = <&intc>; + clocks = <&clkc 12>; + }; + + can0: can@e0008000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clocks = <&clkc 19>, <&clkc 36>; + clock-names = "can_clk", "pclk"; + reg = <0xe0008000 0x1000>; + interrupts = <0 28 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + can1: can@e0009000 { + compatible = "xlnx,zynq-can-1.0"; + status = "disabled"; + clocks = <&clkc 20>, <&clkc 37>; + clock-names = "can_clk", "pclk"; + reg = <0xe0009000 0x1000>; + interrupts = <0 51 4>; + interrupt-parent = <&intc>; + tx-fifo-depth = <0x40>; + rx-fifo-depth = <0x40>; + }; + + gpio0: gpio@e000a000 { + compatible = "xlnx,zynq-gpio-1.0"; + #gpio-cells = <2>; + clocks = <&clkc 42>; + gpio-controller; + interrupt-parent = <&intc>; + interrupts = <0 20 4>; + reg = <0xe000a000 0x1000>; + }; + i2c0: i2c@e0004000 { compatible = "cdns,i2c-r1p10"; status = "disabled"; @@ -105,23 +147,47 @@ L2: cache-controller { }; uart0: serial@e0000000 { - compatible = "xlnx,xuartps"; + compatible = "xlnx,xuartps", "cdns,uart-r1p8"; status = "disabled"; clocks = <&clkc 23>, <&clkc 40>; - clock-names = "ref_clk", "aper_clk"; + clock-names = "uart_clk", "pclk"; reg = <0xE0000000 0x1000>; interrupts = <0 27 4>; }; uart1: serial@e0001000 { - compatible = "xlnx,xuartps"; + compatible = "xlnx,xuartps", "cdns,uart-r1p8"; status = "disabled"; clocks = <&clkc 24>, <&clkc 41>; - clock-names = "ref_clk", "aper_clk"; + clock-names = "uart_clk", "pclk"; reg = <0xE0001000 0x1000>; interrupts = <0 50 4>; }; + spi0: spi@e0006000 { + compatible = "xlnx,zynq-spi-r1p6"; + reg = <0xe0006000 0x1000>; + status = "disabled"; + interrupt-parent = <&intc>; + interrupts = <0 26 4>; + clocks = <&clkc 25>, <&clkc 34>; + clock-names = "ref_clk", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi1: spi@e0007000 { + compatible = "xlnx,zynq-spi-r1p6"; + reg = <0xe0007000 0x1000>; + status = "disabled"; + interrupt-parent = <&intc>; + interrupts = <0 49 4>; + clocks = <&clkc 26>, <&clkc 35>; + clock-names = "ref_clk", "pclk"; + #address-cells = <1>; + #size-cells = <0>; + }; + gem0: ethernet@e000b000 { compatible = "cdns,gem"; reg = <0xe000b000 0x4000>; @@ -186,6 +252,22 @@ clkc: clkc@100 { }; }; + dmac_s: dmac@f8003000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0xf8003000 0x1000>; + interrupt-parent = <&intc>; + interrupts = <0 13 4>, + <0 14 4>, <0 15 4>, + <0 16 4>, <0 17 4>, + <0 40 4>, <0 41 4>, + <0 42 4>, <0 43 4>; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <4>; + clocks = <&clkc 27>; + clock-names = "apb_pclk"; + }; + devcfg: devcfg@f8007000 { compatible = "xlnx,zynq-devcfg-1.0"; reg = <0xf8007000 0x100>; diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts new file mode 100644 index 0000000000000000000000000000000000000000..41afd9da6876329811454ae9bb466ef6aa27af5a --- /dev/null +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -0,0 +1,64 @@ +/* + * Copyright (c) 2014 SUSE LINUX Products GmbH + * + * Derived from zynq-zed.dts: + * + * Copyright (C) 2011 Xilinx + * Copyright (C) 2012 National Instruments Corp. + * Copyright (C) 2013 Xilinx + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ +/dts-v1/; +/include/ "zynq-7000.dtsi" + +/ { + model = "Adapteva Parallella Board"; + compatible = "adapteva,parallella", "xlnx,zynq-7000"; + + memory { + device_type = "memory"; + reg = <0 0x40000000>; + }; + + chosen { + bootargs = "console=ttyPS0,115200 earlyprintk root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait"; + linux,stdout-path = "/amba/serial@e0001000"; + }; +}; + +&gem0 { + status = "okay"; + phy-mode = "rgmii-id"; + phy-handle = <ðernet_phy>; + #address-cells = <1>; + #size-cells = <0>; + + ethernet_phy: ethernet-phy@0 { + /* Marvell 88E1318 */ + compatible = "ethernet-phy-id0141.0e90", + "ethernet-phy-ieee802.3-c22"; + reg = <0>; + marvell,reg-init = <0x3 0x10 0xff00 0x1e>, + <0x3 0x11 0xfff0 0xa>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&sdhci1 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 5e09cee33d4230773f8687fd3e187f22e49d0b77..835c3089c61cb6d55e6fadc93795d224ec1bec00 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -29,6 +29,10 @@ chosen { }; +&can0 { + status = "okay"; +}; + &gem0 { status = "okay"; phy-mode = "rgmii"; diff --git a/arch/arm/common/bL_switcher.c b/arch/arm/common/bL_switcher.c index 490f3dced749956d6f63f94ba74cebc6f55a4964..6eaddc47c43dfbd60f52b6d49c425acbd55cab62 100644 --- a/arch/arm/common/bL_switcher.c +++ b/arch/arm/common/bL_switcher.c @@ -57,16 +57,6 @@ static int read_mpidr(void) return id & MPIDR_HWID_BITMASK; } -/* - * Get a global nanosecond time stamp for tracing. - */ -static s64 get_ns(void) -{ - struct timespec ts; - getnstimeofday(&ts); - return timespec_to_ns(&ts); -} - /* * bL switcher core code. */ @@ -224,7 +214,7 @@ static int bL_switch_to(unsigned int new_cluster_id) */ local_irq_disable(); local_fiq_disable(); - trace_cpu_migrate_begin(get_ns(), ob_mpidr); + trace_cpu_migrate_begin(ktime_get_real_ns(), ob_mpidr); /* redirect GIC's SGIs to our counterpart */ gic_migrate_target(bL_gic_id[ib_cpu][ib_cluster]); @@ -267,7 +257,7 @@ static int bL_switch_to(unsigned int new_cluster_id) tdev->evtdev->next_event, 1); } - trace_cpu_migrate_finish(get_ns(), ib_mpidr); + trace_cpu_migrate_finish(ktime_get_real_ns(), ib_mpidr); local_fiq_enable(); local_irq_enable(); @@ -558,7 +548,7 @@ int bL_switcher_get_logical_index(u32 mpidr) static void bL_switcher_trace_trigger_cpu(void *__always_unused info) { - trace_cpu_migrate_current(get_ns(), read_mpidr()); + trace_cpu_migrate_current(ktime_get_real_ns(), read_mpidr()); } int bL_switcher_trace_trigger(void) diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index 485be42519b96ddec1dcceafd19c84431e45cd99..88099175fc56c64be13c5a31e5cf05ed18b60e50 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -1414,6 +1414,34 @@ void edma_clear_event(unsigned channel) } EXPORT_SYMBOL(edma_clear_event); +/* + * edma_assign_channel_eventq - move given channel to desired eventq + * Arguments: + * channel - channel number + * eventq_no - queue to move the channel + * + * Can be used to move a channel to a selected event queue. + */ +void edma_assign_channel_eventq(unsigned channel, enum dma_event_q eventq_no) +{ + unsigned ctlr; + + ctlr = EDMA_CTLR(channel); + channel = EDMA_CHAN_SLOT(channel); + + if (channel >= edma_cc[ctlr]->num_channels) + return; + + /* default to low priority queue */ + if (eventq_no == EVENTQ_DEFAULT) + eventq_no = edma_cc[ctlr]->default_queue; + if (eventq_no >= edma_cc[ctlr]->num_tc) + return; + + map_dmach_queue(ctlr, channel, eventq_no); +} +EXPORT_SYMBOL(edma_assign_channel_eventq); + static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, struct edma *edma_cc) { @@ -1470,7 +1498,8 @@ static int edma_setup_from_hw(struct device *dev, struct edma_soc_info *pdata, queue_priority_map[i][1] = -1; pdata->queue_priority_mapping = queue_priority_map; - pdata->default_queue = 0; + /* Default queue has the lowest priority */ + pdata->default_queue = i - 1; return 0; } diff --git a/arch/arm/common/mcpm_entry.c b/arch/arm/common/mcpm_entry.c index f91136ab447ee3864cf204642bfab10640ecd47d..3c165fc2dce284593de47902637e1f7068e8798b 100644 --- a/arch/arm/common/mcpm_entry.c +++ b/arch/arm/common/mcpm_entry.c @@ -12,11 +12,13 @@ #include #include #include +#include #include #include #include #include +#include extern unsigned long mcpm_entry_vectors[MAX_NR_CLUSTERS][MAX_CPUS_PER_CLUSTER]; @@ -146,6 +148,56 @@ int mcpm_cpu_powered_up(void) return 0; } +#ifdef CONFIG_ARM_CPU_SUSPEND + +static int __init nocache_trampoline(unsigned long _arg) +{ + void (*cache_disable)(void) = (void *)_arg; + unsigned int mpidr = read_cpuid_mpidr(); + unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0); + unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1); + phys_reset_t phys_reset; + + mcpm_set_entry_vector(cpu, cluster, cpu_resume); + setup_mm_for_reboot(); + + __mcpm_cpu_going_down(cpu, cluster); + BUG_ON(!__mcpm_outbound_enter_critical(cpu, cluster)); + cache_disable(); + __mcpm_outbound_leave_critical(cluster, CLUSTER_DOWN); + __mcpm_cpu_down(cpu, cluster); + + phys_reset = (phys_reset_t)(unsigned long)virt_to_phys(cpu_reset); + phys_reset(virt_to_phys(mcpm_entry_point)); + BUG(); +} + +int __init mcpm_loopback(void (*cache_disable)(void)) +{ + int ret; + + /* + * We're going to soft-restart the current CPU through the + * low-level MCPM code by leveraging the suspend/resume + * infrastructure. Let's play it safe by using cpu_pm_enter() + * in case the CPU init code path resets the VFP or similar. + */ + local_irq_disable(); + local_fiq_disable(); + ret = cpu_pm_enter(); + if (!ret) { + ret = cpu_suspend((unsigned long)cache_disable, nocache_trampoline); + cpu_pm_exit(); + } + local_fiq_enable(); + local_irq_enable(); + if (ret) + pr_err("%s returned %d\n", __func__, ret); + return ret; +} + +#endif + struct sync_struct mcpm_sync; /* diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index fd6bff0c5b967a7503c8912c8ef2a52101e4c7eb..19211324772f387c4925984e58fe29b4682fed38 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -233,13 +233,13 @@ static void __init sp804_of_init(struct device_node *np) if (IS_ERR(clk1)) clk1 = NULL; - /* Get the 2nd clock if the timer has 2 timer clocks */ + /* Get the 2nd clock if the timer has 3 timer clocks */ if (of_count_phandle_with_args(np, "clocks", "#clock-cells") == 3) { clk2 = of_clk_get(np, 1); if (IS_ERR(clk2)) { pr_err("sp804: %s clock not found: %d\n", np->name, (int)PTR_ERR(clk2)); - goto err; + clk2 = NULL; } } else clk2 = clk1; diff --git a/arch/arm/configs/armadillo800eva_defconfig b/arch/arm/configs/armadillo800eva_defconfig index 065adddeee3ec4d77bcba307f3dd0972ed85d9e3..d9675c68a39925e1e496f8112601db3d84e7119e 100644 --- a/arch/arm/configs/armadillo800eva_defconfig +++ b/arch/arm/configs/armadillo800eva_defconfig @@ -96,6 +96,7 @@ CONFIG_I2C_GPIO=y CONFIG_I2C_SH_MOBILE=y # CONFIG_HWMON is not set CONFIG_REGULATOR=y +CONFIG_REGULATOR_GPIO=y CONFIG_MEDIA_SUPPORT=y CONFIG_VIDEO_DEV=y CONFIG_MEDIA_CAMERA_SUPPORT=y @@ -127,6 +128,9 @@ CONFIG_USB_ETH=m CONFIG_MMC=y CONFIG_MMC_SDHI=y CONFIG_MMC_SH_MMCIF=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_S35390A=y CONFIG_DMADEVICES=y diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig index 4bf72264b17511037f1fed6f922b87d5480d6b32..fbebcbce1e8c8bf46e3ab8e254ab109327160830 100644 --- a/arch/arm/configs/bcm_defconfig +++ b/arch/arm/configs/bcm_defconfig @@ -27,6 +27,7 @@ CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM_MOBILE=y CONFIG_ARM_THUMBEE=y +CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_COMPACTION is not set diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig index e07a227ec0dbb331bae2428427dc36fec444adec..fc7d1683bf67c0b980ae6450e613e7381f4201ca 100644 --- a/arch/arm/configs/exynos_defconfig +++ b/arch/arm/configs/exynos_defconfig @@ -8,15 +8,17 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_BLK_DEV_BSG is not set CONFIG_PARTITION_ADVANCED=y CONFIG_ARCH_EXYNOS=y -CONFIG_S3C_LOWLEVEL_UART_PORT=3 -CONFIG_S3C24XX_PWM=y -CONFIG_ARCH_EXYNOS5=y -CONFIG_MACH_EXYNOS4_DT=y +CONFIG_ARCH_EXYNOS3=y +CONFIG_EXYNOS5420_MCPM=y CONFIG_SMP=y +CONFIG_BIG_LITTLE=y +CONFIG_BL_SWITCHER=y +CONFIG_BL_SWITCHER_DUMMY_IF=y CONFIG_NR_CPUS=8 CONFIG_PREEMPT=y CONFIG_AEABI=y CONFIG_HIGHMEM=y +CONFIG_CMA=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y @@ -24,6 +26,7 @@ CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC1,115200 init=/linuxrc mem=256M" CONFIG_VFP=y CONFIG_NEON=y +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -34,6 +37,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_PROC_DEVICETREE=y +CONFIG_DMA_CMA=y +CONFIG_CMA_SIZE_MBYTES=64 CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_CRYPTOLOOP=y CONFIG_BLK_DEV_RAM=y @@ -66,11 +71,22 @@ CONFIG_I2C=y CONFIG_I2C_MUX=y CONFIG_I2C_ARB_GPIO_CHALLENGE=y CONFIG_I2C_EXYNOS5=y +CONFIG_I2C_CROS_EC_TUNNEL=y +CONFIG_SPI=y +CONFIG_SPI_S3C64XX=y CONFIG_I2C_S3C2410=y CONFIG_DEBUG_GPIO=y +CONFIG_POWER_SUPPLY=y +CONFIG_CHARGER_TPS65090=y # CONFIG_HWMON is not set +CONFIG_THERMAL=y +CONFIG_EXYNOS_THERMAL=y +CONFIG_EXYNOS_THERMAL_CORE=y +CONFIG_WATCHDOG=y +CONFIG_S3C2410_WATCHDOG=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_I2C=y +CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX77686=y CONFIG_MFD_MAX8997=y CONFIG_MFD_SEC_CORE=y @@ -80,6 +96,7 @@ CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_GPIO=y CONFIG_REGULATOR_MAX8997=y CONFIG_REGULATOR_MAX77686=y +CONFIG_REGULATOR_S2MPA01=y CONFIG_REGULATOR_S2MPS11=y CONFIG_REGULATOR_S5M8767=y CONFIG_REGULATOR_TPS65090=y @@ -88,28 +105,50 @@ CONFIG_FB_MODE_HELPERS=y CONFIG_FB_SIMPLE=y CONFIG_EXYNOS_VIDEO=y CONFIG_EXYNOS_MIPI_DSI=y -CONFIG_EXYNOS_DP=y CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FONTS=y CONFIG_FONT_7x14=y CONFIG_LOGO=y +CONFIG_SOUND=y +CONFIG_SND=y +CONFIG_SND_SOC=y +CONFIG_SND_SOC_SAMSUNG=y +CONFIG_SND_SOC_SNOW=y CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_EXYNOS=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_EXYNOS=y CONFIG_USB_STORAGE=y CONFIG_USB_DWC3=y -CONFIG_USB_PHY=y -CONFIG_SAMSUNG_USB2PHY=y -CONFIG_SAMSUNG_USB3PHY=y +CONFIG_USB_HSIC_USB3503=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_S3C=y +CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_DW=y CONFIG_MMC_DW_IDMAC=y CONFIG_MMC_DW_EXYNOS=y CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_MAX77686=y +CONFIG_RTC_DRV_S5M=y CONFIG_RTC_DRV_S3C=y +CONFIG_DMADEVICES=y +CONFIG_PL330_DMA=y CONFIG_COMMON_CLK_MAX77686=y +CONFIG_COMMON_CLK_S2MPS11=y +CONFIG_EXYNOS_IOMMU=y +CONFIG_IIO=y +CONFIG_EXYNOS_ADC=y +CONFIG_PWM=y +CONFIG_PWM_SAMSUNG=y +CONFIG_PHY_EXYNOS5250_SATA=y +CONFIG_PHY_SAMSUNG_USB2=y +CONFIG_PHY_EXYNOS4210_USB2=y +CONFIG_PHY_EXYNOS4X12_USB2=y +CONFIG_PHY_EXYNOS5250_USB2=y +CONFIG_PHY_EXYNOS5_USBDRD=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y CONFIG_EXT4_FS=y @@ -123,6 +162,7 @@ CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_HUNG_TASK=y diff --git a/arch/arm/configs/genmai_defconfig b/arch/arm/configs/genmai_defconfig deleted file mode 100644 index d238fafb67622a2ee72bfe57fd3de5394430ce91..0000000000000000000000000000000000000000 --- a/arch/arm/configs/genmai_defconfig +++ /dev/null @@ -1,122 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=16 -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_EMBEDDED=y -CONFIG_PERF_EVENTS=y -CONFIG_SLAB=y -# CONFIG_LBDAF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -CONFIG_ARCH_SHMOBILE_LEGACY=y -CONFIG_ARCH_R7S72100=y -CONFIG_MACH_GENMAI=y -# CONFIG_SH_TIMER_CMT is not set -# CONFIG_SH_TIMER_MTU2 is not set -# CONFIG_SH_TIMER_TMU is not set -# CONFIG_EM_TIMER_STI is not set -CONFIG_ARM_ERRATA_430973=y -CONFIG_ARM_ERRATA_458693=y -CONFIG_ARM_ERRATA_460075=y -CONFIG_ARM_ERRATA_743622=y -CONFIG_ARM_ERRATA_754322=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_FORCE_MAX_ZONEORDER=13 -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_ARM_APPENDED_DTB=y -CONFIG_KEXEC=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_VFP=y -CONFIG_NEON=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_PM_RUNTIME=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_IPV6 is not set -# CONFIG_WIRELESS is not set -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_EEPROM_AT24=y -CONFIG_NETDEVICES=y -# CONFIG_NET_CORE is not set -# CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set -# CONFIG_NET_VENDOR_BROADCOM is not set -# CONFIG_NET_VENDOR_CIRRUS is not set -# CONFIG_NET_VENDOR_FARADAY is not set -# CONFIG_NET_VENDOR_INTEL is not set -# CONFIG_NET_VENDOR_MARVELL is not set -# CONFIG_NET_VENDOR_MICREL is not set -# CONFIG_NET_VENDOR_NATSEMI is not set -CONFIG_SH_ETH=y -# CONFIG_NET_VENDOR_SEEQ is not set -# CONFIG_NET_VENDOR_SMSC is not set -# CONFIG_NET_VENDOR_STMICRO is not set -# CONFIG_NET_VENDOR_VIA is not set -# CONFIG_NET_VENDOR_WIZNET is not set -# CONFIG_WLAN is not set -# CONFIG_INPUT_MOUSEDEV_PSAUX is not set -CONFIG_INPUT_EVDEV=y -# CONFIG_KEYBOARD_ATKBD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_SERIO is not set -# CONFIG_LEGACY_PTYS is not set -CONFIG_SERIAL_SH_SCI=y -CONFIG_SERIAL_SH_SCI_NR_UARTS=10 -CONFIG_SERIAL_SH_SCI_CONSOLE=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_RIIC=y -CONFIG_SPI=y -CONFIG_SPI_RSPI=y -# CONFIG_HWMON is not set -CONFIG_THERMAL=y -CONFIG_RCAR_THERMAL=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -CONFIG_DRM=y -CONFIG_DRM_RCAR_DU=y -# CONFIG_USB_SUPPORT is not set -CONFIG_MMC=y -CONFIG_MMC_SDHI=y -CONFIG_MMC_SH_MMCIF=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_RTC_CLASS=y -CONFIG_DMADEVICES=y -CONFIG_SH_DMAE=y -# CONFIG_IOMMU_SUPPORT is not set -# CONFIG_DNOTIFY is not set -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_CONFIGFS_FS=y -# CONFIG_MISC_FILESYSTEMS is not set -CONFIG_NFS_FS=y -CONFIG_NFS_V3_ACL=y -CONFIG_NFS_V4=y -CONFIG_NFS_V4_1=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ISO8859_1=y -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -# CONFIG_ARM_UNWIND is not set -# CONFIG_CRYPTO_ANSI_CPRNG is not set -# CONFIG_CRYPTO_HW is not set diff --git a/arch/arm/configs/hi3xxx_defconfig b/arch/arm/configs/hi3xxx_defconfig index f186bdfa236918aa8d27a4cec4229698af9d74c9..9630687e7d07e2d1628f5c86e9ab3cb28c8e85c6 100644 --- a/arch/arm/configs/hi3xxx_defconfig +++ b/arch/arm/configs/hi3xxx_defconfig @@ -3,7 +3,9 @@ CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_BLK_DEV_INITRD=y CONFIG_RD_LZMA=y +CONFIG_ARCH_HISI=y CONFIG_ARCH_HI3xxx=y +CONFIG_ARCH_HIX5HD2=y CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_AEABI=y diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index bada59d93b675310637efa063035c0d23ec6b066..63bde0efc0419b9e4981a369d5b3068d5b560932 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -1,6 +1,7 @@ # CONFIG_SWAP is not set CONFIG_SYSVIPC=y CONFIG_POSIX_MQUEUE=y +CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=14 @@ -35,10 +36,8 @@ CONFIG_MACH_EUKREA_CPUIMX27_USESDHC2=y CONFIG_MACH_EUKREA_CPUIMX27_USEUART4=y CONFIG_MACH_MX27_3DS=y CONFIG_MACH_IMX27_VISSTRIM_M10=y -CONFIG_MACH_IMX27LITE=y CONFIG_MACH_PCA100=y CONFIG_MACH_MXT_TD60=y -CONFIG_MACH_IMX27IPCAM=y CONFIG_MACH_IMX27_DT=y CONFIG_PREEMPT=y CONFIG_AEABI=y @@ -159,6 +158,8 @@ CONFIG_USB_CHIPIDEA=y CONFIG_USB_CHIPIDEA_UDC=y CONFIG_USB_CHIPIDEA_HOST=y CONFIG_NOP_USB_XCEIV=y +CONFIG_USB_GADGET=y +CONFIG_USB_ETH=m CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 59b7e45142d80931c5e46882188c524530d4b22a..16cfec4385c8215796b9090b69fc7fd1b8fa98ba 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -1,5 +1,6 @@ CONFIG_KERNEL_LZO=y CONFIG_SYSVIPC=y +CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=18 @@ -31,11 +32,12 @@ CONFIG_MACH_IMX35_DT=y CONFIG_MACH_PCM043=y CONFIG_MACH_MX35_3DS=y CONFIG_MACH_VPR200=y -CONFIG_MACH_IMX51_DT=y +CONFIG_SOC_IMX51=y CONFIG_SOC_IMX50=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y +CONFIG_SOC_IMX6SX=y CONFIG_SOC_VF610=y CONFIG_PCI=y CONFIG_PCI_IMX6=y @@ -67,6 +69,8 @@ CONFIG_IP_PNP_DHCP=y # CONFIG_INET_LRO is not set CONFIG_IPV6=y CONFIG_NETFILTER=y +CONFIG_CAN=y +CONFIG_CAN_FLEXCAN=y CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_RFKILL=y @@ -160,6 +164,7 @@ CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MC9S08DZ60=y +CONFIG_GPIO_STMPE=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y CONFIG_IMX2_WDT=y @@ -242,6 +247,7 @@ CONFIG_RTC_DRV_SNVS=y CONFIG_DMADEVICES=y CONFIG_IMX_SDMA=y CONFIG_MXS_DMA=y +CONFIG_FSL_EDMA=y CONFIG_STAGING=y CONFIG_DRM_IMX=y CONFIG_DRM_IMX_FB_HELPER=y @@ -288,6 +294,7 @@ CONFIG_NLS_ASCII=y CONFIG_NLS_ISO8859_1=y CONFIG_NLS_ISO8859_15=m CONFIG_NLS_UTF8=y +CONFIG_PRINTK_TIME=y CONFIG_DEBUG_FS=y CONFIG_MAGIC_SYSRQ=y # CONFIG_SCHED_DEBUG is not set diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig deleted file mode 100644 index b9e480c10b10880bb64d2d5f2ec8ac872ced5890..0000000000000000000000000000000000000000 --- a/arch/arm/configs/kirkwood_defconfig +++ /dev/null @@ -1,181 +0,0 @@ -CONFIG_SYSVIPC=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_LOG_BUF_SHIFT=19 -CONFIG_PROFILING=y -CONFIG_OPROFILE=y -CONFIG_KPROBES=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_KIRKWOOD=y -CONFIG_MACH_D2NET_V2=y -CONFIG_MACH_NET2BIG_V2=y -CONFIG_MACH_NET5BIG_V2=y -CONFIG_MACH_OPENRD_BASE=y -CONFIG_MACH_OPENRD_CLIENT=y -CONFIG_MACH_OPENRD_ULTIMATE=y -CONFIG_MACH_RD88F6192_NAS=y -CONFIG_MACH_RD88F6281=y -CONFIG_MACH_T5325=y -CONFIG_MACH_TS219=y -CONFIG_MACH_TS41X=y -CONFIG_ARCH_KIRKWOOD_DT=y -CONFIG_MACH_MV88F6281GTW_GE_DT=y -# CONFIG_CPU_FEROCEON_OLD_ID is not set -CONFIG_PCI_MVEBU=y -CONFIG_PREEMPT=y -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_HIGHMEM=y -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_STAT_DETAILS=y -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -CONFIG_CPU_IDLE=y -CONFIG_NET=y -CONFIG_PACKET=y -CONFIG_UNIX=y -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -CONFIG_IP_PNP_BOOTP=y -# CONFIG_IPV6 is not set -CONFIG_NET_PKTGEN=m -CONFIG_CFG80211=y -CONFIG_MAC80211=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_MTD=y -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_BLOCK=y -CONFIG_MTD_CFI=y -CONFIG_MTD_JEDECPROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_STAA=y -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_M25P80=y -CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_ORION=y -CONFIG_MTD_SPI_NOR=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_EEPROM_AT24=y -# CONFIG_SCSI_PROC_FS is not set -CONFIG_BLK_DEV_SD=y -CONFIG_BLK_DEV_SR=m -CONFIG_CHR_DEV_SG=m -CONFIG_ATA=y -CONFIG_SATA_AHCI=y -CONFIG_SATA_MV=y -CONFIG_NETDEVICES=y -CONFIG_NET_DSA_MV88E6123_61_65=y -CONFIG_MV643XX_ETH=y -CONFIG_R8169=y -CONFIG_MARVELL_PHY=y -CONFIG_LIBERTAS=y -CONFIG_LIBERTAS_SDIO=y -CONFIG_INPUT_EVDEV=y -CONFIG_KEYBOARD_GPIO=y -# CONFIG_INPUT_MOUSE is not set -CONFIG_LEGACY_PTY_COUNT=16 -# CONFIG_DEVKMEM is not set -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_SERIAL_OF_PLATFORM=y -# CONFIG_HW_RANDOM is not set -CONFIG_I2C=y -# CONFIG_I2C_COMPAT is not set -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_MV64XXX=y -CONFIG_SPI=y -CONFIG_SPI_ORION=y -CONFIG_GPIO_SYSFS=y -CONFIG_SENSORS_ADT7475=y -CONFIG_SENSORS_LM63=y -CONFIG_SENSORS_LM75=y -CONFIG_SENSORS_LM85=y -CONFIG_THERMAL=y -CONFIG_WATCHDOG=y -CONFIG_ORION_WATCHDOG=y -CONFIG_HID_DRAGONRISE=y -CONFIG_HID_GYRATION=y -CONFIG_HID_TWINHAN=y -CONFIG_HID_NTRIG=y -CONFIG_HID_PANTHERLORD=y -CONFIG_HID_PETALYNX=y -CONFIG_HID_SAMSUNG=y -CONFIG_HID_SONY=y -CONFIG_HID_SUNPLUS=y -CONFIG_HID_GREENASIA=y -CONFIG_HID_SMARTJOYPLUS=y -CONFIG_HID_TOPSEED=y -CONFIG_HID_THRUSTMASTER=y -CONFIG_HID_ZEROPLUS=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_PRINTER=m -CONFIG_USB_STORAGE=y -CONFIG_USB_STORAGE_DATAFAB=y -CONFIG_USB_STORAGE_FREECOM=y -CONFIG_USB_STORAGE_SDDR09=y -CONFIG_USB_STORAGE_SDDR55=y -CONFIG_USB_STORAGE_JUMPSHOT=y -CONFIG_MMC=y -CONFIG_SDIO_UART=y -CONFIG_MMC_MVSDIO=y -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_GPIO=y -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=y -CONFIG_LEDS_TRIGGER_HEARTBEAT=y -CONFIG_LEDS_TRIGGER_DEFAULT_ON=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_DRV_RS5C372=y -CONFIG_RTC_DRV_PCF8563=y -CONFIG_RTC_DRV_S35390A=y -CONFIG_RTC_DRV_MV=y -CONFIG_DMADEVICES=y -CONFIG_MV_XOR=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -# CONFIG_EXT3_FS_XATTR is not set -CONFIG_EXT4_FS=y -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_UDF_FS=m -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y -CONFIG_CRAMFS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_CODEPAGE_850=y -CONFIG_NLS_ISO8859_1=y -CONFIG_NLS_ISO8859_2=y -CONFIG_NLS_UTF8=y -CONFIG_DEBUG_INFO=y -CONFIG_DEBUG_FS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -# CONFIG_SCHED_DEBUG is not set -# CONFIG_DEBUG_PREEMPT is not set -# CONFIG_FTRACE is not set -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_LL=y -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_DEV_MV_CESA=y -CONFIG_CRC_CCITT=y -CONFIG_CRC16=y -CONFIG_LIBCRC32C=y diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index 7f52dad97f51337dcf8a6685106fe2de95b1971c..dd18c9e527d647b0f9685285248764571e8d1d4a 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -45,7 +45,6 @@ CONFIG_RFKILL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_SCSI=y -CONFIG_SCSI_TGT=y CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=y diff --git a/arch/arm/configs/multi_v5_defconfig b/arch/arm/configs/multi_v5_defconfig index 5ebfa8bf85094b8ff5ded8b819a9d7f278304a22..018bef9fa7e8f26fc4cb241c954cd91b3e203a2a 100644 --- a/arch/arm/configs/multi_v5_defconfig +++ b/arch/arm/configs/multi_v5_defconfig @@ -11,6 +11,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y +CONFIG_MACH_NETXBIG=y CONFIG_ARCH_MXC=y CONFIG_MACH_IMX25_DT=y CONFIG_MACH_IMX27_DT=y @@ -94,6 +95,7 @@ CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y CONFIG_SENSORS_ADT7475=y +CONFIG_SENSORS_G762=y CONFIG_SENSORS_LM63=y CONFIG_SENSORS_LM75=y CONFIG_SENSORS_LM85=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 5348364979985172d241a63b66b6c52237848d62..5fb95fb758d9a43ae6ef5ccfd25ee2ff304f5006 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -19,15 +19,18 @@ CONFIG_MACH_DOVE=y CONFIG_ARCH_BCM=y CONFIG_ARCH_BCM_MOBILE=y CONFIG_ARCH_BCM_5301X=y +CONFIG_ARCH_BRCMSTB=y CONFIG_ARCH_BERLIN=y CONFIG_MACH_BERLIN_BG2=y CONFIG_MACH_BERLIN_BG2CD=y CONFIG_MACH_BERLIN_BG2Q=y CONFIG_ARCH_HIGHBANK=y +CONFIG_ARCH_HISI=y CONFIG_ARCH_HI3xxx=y +CONFIG_ARCH_HIX5HD2=y CONFIG_ARCH_KEYSTONE=y CONFIG_ARCH_MXC=y -CONFIG_MACH_IMX51_DT=y +CONFIG_SOC_IMX51=y CONFIG_SOC_IMX53=y CONFIG_SOC_IMX6Q=y CONFIG_SOC_IMX6SL=y @@ -66,7 +69,6 @@ CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_VEXPRESS_CA9X4=y CONFIG_ARCH_WM8850=y CONFIG_ARCH_ZYNQ=y -CONFIG_NEON=y CONFIG_TRUSTED_FOUNDATIONS=y CONFIG_PCI=y CONFIG_PCI_MSI=y @@ -83,6 +85,7 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y CONFIG_CPU_IDLE=y +CONFIG_NEON=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -127,6 +130,7 @@ CONFIG_BLK_DEV_SR=y CONFIG_SCSI_MULTI_LUN=y CONFIG_ATA=y CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_ST=y CONFIG_AHCI_SUNXI=y CONFIG_SATA_HIGHBANK=y CONFIG_SATA_MV=y @@ -134,6 +138,7 @@ CONFIG_NETDEVICES=y CONFIG_SUN4I_EMAC=y CONFIG_MACB=y CONFIG_NET_CALXEDA_XGMAC=y +CONFIG_IGB=y CONFIG_MV643XX_ETH=y CONFIG_MVNETA=y CONFIG_KS8851=y @@ -155,8 +160,11 @@ CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y CONFIG_KEYBOARD_SPEAR=y +CONFIG_KEYBOARD_ST_KEYSCAN=y CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_STMPE=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y CONFIG_SERIO_AMBAKMI=y @@ -195,6 +203,7 @@ CONFIG_I2C_EXYNOS5=y CONFIG_I2C_MV64XXX=y CONFIG_I2C_SIRF=y CONFIG_I2C_TEGRA=y +CONFIG_I2C_ST=y CONFIG_SPI=y CONFIG_SPI_OMAP24XX=y CONFIG_SPI_ORION=y @@ -222,8 +231,11 @@ CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_SUN6I=y CONFIG_SENSORS_LM90=y +CONFIG_SENSORS_LM95245=y CONFIG_THERMAL=y CONFIG_ARMADA_THERMAL=y +CONFIG_ST_THERMAL_SYSCFG=y +CONFIG_ST_THERMAL_MEMMAP=y CONFIG_WATCHDOG=y CONFIG_ORION_WATCHDOG=y CONFIG_SUNXI_WATCHDOG=y @@ -233,6 +245,7 @@ CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX8907=y CONFIG_MFD_SEC_CORE=y +CONFIG_MFD_STMPE=y CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS6586X=y @@ -311,12 +324,16 @@ CONFIG_MMC_SDHCI_SPEAR=y CONFIG_MMC_SDHCI_S3C=y CONFIG_MMC_SDHCI_S3C_DMA=y CONFIG_MMC_SDHCI_BCM_KONA=y +CONFIG_MMC_SDHCI_ST=y CONFIG_MMC_OMAP=y CONFIG_MMC_OMAP_HS=y CONFIG_MMC_MVSDIO=y CONFIG_MMC_SUNXI=y CONFIG_MMC_DW=y CONFIG_MMC_DW_EXYNOS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_PWM=y CONFIG_EDAC=y CONFIG_EDAC_MM_EDAC=y CONFIG_EDAC_HIGHBANK_MC=y @@ -368,6 +385,8 @@ CONFIG_PWM=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_OMAP_USB2=y +CONFIG_TI_PIPE3=y +CONFIG_PHY_MIPHY365X=y CONFIG_PHY_SUN4I_USB=y CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig index 27c732fdf21eae1bfe04e8e19761dffd9996bdc6..22058e18dfaab66d28beb5593494451a628be5a7 100644 --- a/arch/arm/configs/mvebu_v5_defconfig +++ b/arch/arm/configs/mvebu_v5_defconfig @@ -12,6 +12,7 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_ARCH_MULTI_V7 is not set CONFIG_ARCH_MVEBU=y CONFIG_MACH_KIRKWOOD=y +CONFIG_MACH_NETXBIG=y # CONFIG_CPU_FEROCEON_OLD_ID is not set CONFIG_PCI_MVEBU=y CONFIG_PREEMPT=y @@ -19,6 +20,8 @@ CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 +CONFIG_ARM_APPENDED_DTB=y +CONFIG_ARM_ATAG_DTB_COMPAT=y CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_STAT_DETAILS=y CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y @@ -36,6 +39,8 @@ CONFIG_NET_PKTGEN=m CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_MTD=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_BLOCK=y @@ -89,6 +94,7 @@ CONFIG_POWER_RESET=y CONFIG_POWER_RESET_GPIO=y CONFIG_POWER_RESET_QNAP=y CONFIG_SENSORS_ADT7475=y +CONFIG_SENSORS_G762=y CONFIG_SENSORS_LM63=y CONFIG_SENSORS_LM75=y CONFIG_SENSORS_LM85=y diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig index b0bfefa23902c01fc1faa6495677ff27a0e86877..fdfda1fa95212cfb9e594f06ceb49381502db78e 100644 --- a/arch/arm/configs/mvebu_v7_defconfig +++ b/arch/arm/configs/mvebu_v7_defconfig @@ -29,6 +29,10 @@ CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_CPU_IDLE=y +CONFIG_ARM_MVEBU_V7_CPUIDLE=y +CONFIG_CPU_FREQ=y +CONFIG_CPUFREQ_GENERIC=y CONFIG_VFP=y CONFIG_NET=y CONFIG_INET=y @@ -46,6 +50,7 @@ CONFIG_AHCI_MVEBU=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_MVNETA=y +CONFIG_MVPP2=y CONFIG_MARVELL_PHY=y CONFIG_MWIFIEX=y CONFIG_MWIFIEX_SDIO=y diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index a9f992335eb20dec371ea0c9f7c6ca2c50bb24f4..c7906c2fd645de229aeb12cde6c15cee7e0bb429 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -1,4 +1,5 @@ CONFIG_SYSVIPC=y +CONFIG_FHANDLE=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_TASKSTATS=y diff --git a/arch/arm/configs/omap1_defconfig b/arch/arm/configs/omap1_defconfig index ce541bb3c2dec937f0df52f75aa8fa36294aa254..115cda9f32606a0e3ca9afce28d2632e37f3d1f3 100644 --- a/arch/arm/configs/omap1_defconfig +++ b/arch/arm/configs/omap1_defconfig @@ -26,8 +26,6 @@ CONFIG_ARCH_OMAP=y CONFIG_ARCH_OMAP1=y CONFIG_OMAP_RESET_CLOCKS=y # CONFIG_OMAP_MUX is not set -CONFIG_MAILBOX=y -CONFIG_OMAP1_MBOX=y CONFIG_OMAP_32K_TIMER=y CONFIG_OMAP_DM_TIMER=y CONFIG_ARCH_OMAP730=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 536a137863cba2e533b1cdf750958522c292929d..f650f00e8cee19f8d517753f542fb899cb99b94f 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -180,6 +180,7 @@ CONFIG_TWL4030_WATCHDOG=y CONFIG_MFD_SYSCON=y CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65217=y +CONFIG_MFD_TPS65218=y CONFIG_MFD_TPS65910=y CONFIG_TWL6040_CORE=y CONFIG_REGULATOR_FIXED_VOLTAGE=y @@ -188,6 +189,7 @@ CONFIG_REGULATOR_TI_ABB=y CONFIG_REGULATOR_TPS65023=y CONFIG_REGULATOR_TPS6507X=y CONFIG_REGULATOR_TPS65217=y +CONFIG_REGULATOR_TPS65218=y CONFIG_REGULATOR_TPS65910=y CONFIG_REGULATOR_TWL4030=y CONFIG_REGULATOR_PBIAS=y diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index eb4d204bff4759cc1fc9d99d7420216c73f0d1de..f3142369f594aebbc0efd1066574545d3485e93d 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -225,7 +225,6 @@ CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDETAPE=m CONFIG_BLK_DEV_PLATFORM=y CONFIG_SCSI=y -CONFIG_SCSI_TGT=m CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m CONFIG_BLK_DEV_SR=m diff --git a/arch/arm/configs/s5p64x0_defconfig b/arch/arm/configs/s5p64x0_defconfig deleted file mode 100644 index ad6b61b0bd1187d02cd65500cce8dbebf0cec2c3..0000000000000000000000000000000000000000 --- a/arch/arm/configs/s5p64x0_defconfig +++ /dev/null @@ -1,68 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5P64X0=y -CONFIG_S3C_BOOT_ERROR_RESET=y -CONFIG_S3C_LOWLEVEL_UART_PORT=1 -CONFIG_MACH_SMDK6440=y -CONFIG_MACH_SMDK6450=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_CPU_32v6K=y -CONFIG_AEABI=y -CONFIG_CMDLINE="root=/dev/ram0 rw ramdisk=8192 initrd=0x20800000,8M console=ttySAC1,115200 init=/linuxrc" -CONFIG_FPE_NWFPE=y -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -# CONFIG_MISC_DEVICES is not set -CONFIG_SCSI=y -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_SG=y -CONFIG_INPUT_EVDEV=y -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_8250_NR_UARTS=3 -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_HW_RANDOM=y -# CONFIG_HWMON is not set -CONFIG_DISPLAY_SUPPORT=y -# CONFIG_VGA_CONSOLE is not set -# CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_INOTIFY=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_NLS_CODEPAGE_437=y -CONFIG_NLS_ASCII=y -CONFIG_NLS_ISO8859_1=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y -CONFIG_DEBUG_S3C_UART=1 -CONFIG_CRYPTO=y -# CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRC_CCITT=y diff --git a/arch/arm/configs/s5pc100_defconfig b/arch/arm/configs/s5pc100_defconfig deleted file mode 100644 index 41bafc94dd85b38347684c2b87b948133f05da6f..0000000000000000000000000000000000000000 --- a/arch/arm/configs/s5pc100_defconfig +++ /dev/null @@ -1,49 +0,0 @@ -CONFIG_EXPERIMENTAL=y -CONFIG_SYSFS_DEPRECATED_V2=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_KALLSYMS_ALL=y -CONFIG_MODULES=y -CONFIG_MODULE_UNLOAD=y -# CONFIG_BLK_DEV_BSG is not set -CONFIG_ARCH_S5PC100=y -CONFIG_MACH_SMDKC100=y -CONFIG_AEABI=y -CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=cramfs init=/linuxrc console=ttySAC2,115200 mem=128M" -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_EEPROM_AT24=y -CONFIG_SERIAL_8250=y -CONFIG_SERIAL_SAMSUNG=y -CONFIG_SERIAL_SAMSUNG_CONSOLE=y -CONFIG_HW_RANDOM=y -CONFIG_I2C=y -CONFIG_I2C_CHARDEV=y -# CONFIG_VGA_CONSOLE is not set -CONFIG_MMC=y -CONFIG_MMC_DEBUG=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_SDIO_UART=y -CONFIG_MMC_SDHCI=y -CONFIG_EXT2_FS=y -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_INOTIFY=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_CRAMFS=y -CONFIG_ROMFS_FS=y -CONFIG_MAGIC_SYSRQ=y -CONFIG_DEBUG_KERNEL=y -CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_DEBUG_SPINLOCK=y -CONFIG_DEBUG_MUTEXES=y -CONFIG_DEBUG_SPINLOCK_SLEEP=y -CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y -CONFIG_DEBUG_LL=y diff --git a/arch/arm/configs/shmobile_defconfig b/arch/arm/configs/shmobile_defconfig index 6d6437cbbc523b11510a26a7e75330a6a129e7dc..3b136144cc833c7ec4aa11bc23075fbe3bbc08bf 100644 --- a/arch/arm/configs/shmobile_defconfig +++ b/arch/arm/configs/shmobile_defconfig @@ -10,16 +10,20 @@ CONFIG_PERF_EVENTS=y CONFIG_SLAB=y CONFIG_ARCH_SHMOBILE_MULTI=y CONFIG_ARCH_EMEV2=y +CONFIG_ARCH_R7S72100=y +CONFIG_ARCH_R8A7779=y CONFIG_ARCH_R8A7790=y CONFIG_ARCH_R8A7791=y CONFIG_MACH_KOELSCH=y CONFIG_MACH_LAGER=y +CONFIG_MACH_MARZEN=y # CONFIG_SWP_EMULATE is not set CONFIG_CPU_BPREDICT_DISABLE=y CONFIG_PL310_ERRATA_588369=y CONFIG_ARM_ERRATA_754322=y CONFIG_PCI=y CONFIG_PCI_RCAR_GEN2=y +CONFIG_PCI_RCAR_GEN2_PCIE=y CONFIG_SMP=y CONFIG_SCHED_MC=y CONFIG_HAVE_ARM_ARCH_TIMER=y @@ -33,6 +37,7 @@ CONFIG_KEXEC=y CONFIG_VFP=y CONFIG_NEON=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_PM_RUNTIME=y CONFIG_NET=y CONFIG_PACKET=y CONFIG_UNIX=y @@ -82,6 +87,7 @@ CONFIG_I2C_RCAR=y CONFIG_SPI=y CONFIG_SPI_RSPI=y CONFIG_SPI_SH_MSIOF=y +CONFIG_SPI_SH_HSPI=y CONFIG_GPIO_EM=y CONFIG_GPIO_RCAR=y # CONFIG_HWMON is not set @@ -109,12 +115,14 @@ CONFIG_SND=y CONFIG_SND_SOC=y CONFIG_SND_SOC_RCAR=y CONFIG_USB=y -CONFIG_USB_RCAR_GEN2_PHY=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_RENESAS_USBHS=y +CONFIG_USB_RCAR_PHY=y +CONFIG_USB_RCAR_GEN2_PHY=y CONFIG_USB_GADGET=y CONFIG_USB_RENESAS_USBHS_UDC=y +CONFIG_USB_ETH=y CONFIG_MMC=y CONFIG_MMC_SDHI=y CONFIG_MMC_SH_MMCIF=y @@ -141,3 +149,16 @@ CONFIG_NLS_ISO8859_1=y # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_ARM_UNWIND is not set +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_COMMON=y +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +CONFIG_CPU_FREQ_GOV_POWERSAVE=y +CONFIG_CPU_FREQ_GOV_USERSPACE=y +CONFIG_CPU_FREQ_GOV_ONDEMAND=y +CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_THERMAL=y +CONFIG_GENERIC_CPUFREQ_CPU0=y +CONFIG_REGULATOR_DA9210=y diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index e3a05e8801d8f318ccafba40660471f7c25aea88..d7a5855a5db89a550f967125f5e300c8a1152f54 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -11,6 +11,7 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y +CONFIG_HOTPLUG=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set @@ -40,6 +41,15 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y +CONFIG_CAN=y +CONFIG_CAN_RAW=y +CONFIG_CAN_BCM=y +CONFIG_CAN_GW=y +CONFIG_CAN_DEV=y +CONFIG_CAN_CALC_BITTIMING=y +CONFIG_CAN_C_CAN=y +CONFIG_CAN_C_CAN_PLATFORM=y +CONFIG_CAN_DEBUG_DEVICES=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y CONFIG_PROC_DEVICETREE=y @@ -55,6 +65,14 @@ CONFIG_STMMAC_ETH=y CONFIG_MICREL_PHY=y # CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set CONFIG_INPUT_EVDEV=y +CONFIG_DWMAC_SOCFPGA=y +CONFIG_PPS=y +CONFIG_NETWORK_PHY_TIMESTAMPING=y +CONFIG_PTP_1588_CLOCK=y +CONFIG_VLAN_8021Q=y +CONFIG_VLAN_8021Q_GVRP=y +CONFIG_GARP=y +CONFIG_IPV6=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_AMBAKMI=y CONFIG_LEGACY_PTY_COUNT=16 @@ -63,7 +81,12 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 CONFIG_SERIAL_8250_DW=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_DWAPB=y # CONFIG_RTC_HCTOSYS is not set +CONFIG_WATCHDOG=y +CONFIG_DW_WATCHDOG=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -72,6 +95,7 @@ CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set +CONFIG_FHANDLE=y CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y CONFIG_NTFS_RW=y @@ -86,5 +110,16 @@ CONFIG_DEBUG_INFO=y CONFIG_ENABLE_DEFAULT_TRACERS=y CONFIG_DEBUG_USER=y CONFIG_XZ_DEC=y +CONFIG_I2C=y +CONFIG_I2C_DESIGNWARE_CORE=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y +CONFIG_I2C_CHARDEV=y CONFIG_MMC=y CONFIG_MMC_DW=y +CONFIG_PM=y +CONFIG_SUSPEND=y +CONFIG_MMC_UNSAFE_RESUME=y +CONFIG_USB=y +CONFIG_USB_DWC2=y +CONFIG_USB_DWC2_HOST=y +CONFIG_USB_DWC2_PLATFORM=y diff --git a/arch/arm/configs/spear13xx_defconfig b/arch/arm/configs/spear13xx_defconfig index 82eaa552ed14ed66cdd3359feb204f363542fd93..d271b263f35d0cdd4c731033dddad8d20d15b743 100644 --- a/arch/arm/configs/spear13xx_defconfig +++ b/arch/arm/configs/spear13xx_defconfig @@ -11,13 +11,24 @@ CONFIG_ARCH_SPEAR13XX=y CONFIG_MACH_SPEAR1310=y CONFIG_MACH_SPEAR1340=y # CONFIG_SWP_EMULATE is not set +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCIE_SPEAR13XX=y CONFIG_SMP=y # CONFIG_SMP_ON_UP is not set # CONFIG_ARM_CPU_TOPOLOGY is not set +CONFIG_AEABI=y CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y +CONFIG_VFP=y CONFIG_BINFMT_MISC=y CONFIG_NET=y +CONFIG_UNIX=y +CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +CONFIG_NET_IPIP=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y CONFIG_MTD_OF_PARTS=y @@ -27,6 +38,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_FSMC=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_SIZE=16384 +CONFIG_BLK_DEV_SD=y CONFIG_ATA=y # CONFIG_SATA_PMP is not set CONFIG_SATA_AHCI_PLATFORM=y @@ -66,6 +78,7 @@ CONFIG_USB=y # CONFIG_USB_DEVICE_CLASS is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_OHCI_HCD=y +CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_SPEAR=y @@ -79,11 +92,14 @@ CONFIG_EXT2_FS_SECURITY=y CONFIG_EXT3_FS=y CONFIG_EXT3_FS_SECURITY=y CONFIG_AUTOFS4_FS=m +CONFIG_FUSE_FS=y CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_IOCHARSET="ascii" CONFIG_TMPFS=y CONFIG_JFFS2_FS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ASCII=m diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index fb25e2982f64c848e712f397d85317bbb6f52699..285c433a9aaddc0a3c9840d84a070b37dd684a3a 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -23,14 +23,11 @@ CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_PARTITION_ADVANCED=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set -CONFIG_GPIO_PCA953X=y CONFIG_ARCH_TEGRA=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y CONFIG_ARCH_TEGRA_114_SOC=y CONFIG_ARCH_TEGRA_124_SOC=y -CONFIG_TEGRA_EMC_SCALING_ENABLE=y -CONFIG_TRUSTED_FOUNDATIONS=y CONFIG_PCI=y CONFIG_PCI_MSI=y CONFIG_PCI_TEGRA=y @@ -74,9 +71,6 @@ CONFIG_IPV6_MIP6=y CONFIG_IPV6_TUNNEL=y CONFIG_IPV6_MULTIPLE_TABLES=y CONFIG_CAN=y -CONFIG_CAN_RAW=y -CONFIG_CAN_BCM=y -CONFIG_CAN_DEV=y CONFIG_CAN_MCP251X=y CONFIG_BT=y CONFIG_BT_RFCOMM=y @@ -96,7 +90,6 @@ CONFIG_CMA_SIZE_MBYTES=64 CONFIG_MTD=y CONFIG_MTD_M25P80=y CONFIG_MTD_SPI_NOR=y -CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_AD525X_DPOT=y CONFIG_AD525X_DPOT_I2C=y @@ -111,6 +104,7 @@ CONFIG_SCSI_MULTI_LUN=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_DUMMY=y +CONFIG_IGB=y CONFIG_R8169=y CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y @@ -125,6 +119,8 @@ CONFIG_KEYBOARD_GPIO=y CONFIG_KEYBOARD_TEGRA=y CONFIG_KEYBOARD_CROS_EC=y CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_INPUT_TOUCHSCREEN=y +CONFIG_TOUCHSCREEN_STMPE=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y # CONFIG_LEGACY_PTYS is not set @@ -135,6 +131,7 @@ CONFIG_SERIAL_TEGRA=y CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set # CONFIG_I2C_COMPAT is not set +CONFIG_I2C_CHARDEV=y CONFIG_I2C_MUX_PCA954x=y CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_TEGRA=y @@ -144,6 +141,7 @@ CONFIG_SPI_TEGRA20_SFLASH=y CONFIG_SPI_TEGRA20_SLINK=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y +CONFIG_GPIO_PCA953X=y CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_PALMAS=y CONFIG_GPIO_TPS6586X=y @@ -155,10 +153,12 @@ CONFIG_POWER_RESET=y CONFIG_POWER_RESET_AS3722=y CONFIG_POWER_RESET_GPIO=y CONFIG_SENSORS_LM90=y +CONFIG_SENSORS_LM95245=y CONFIG_MFD_AS3722=y CONFIG_MFD_CROS_EC=y CONFIG_MFD_CROS_EC_SPI=y CONFIG_MFD_MAX8907=y +CONFIG_MFD_STMPE=y CONFIG_MFD_PALMAS=y CONFIG_MFD_TPS65090=y CONFIG_MFD_TPS6586X=y @@ -221,6 +221,7 @@ CONFIG_MMC_SDHCI_TEGRA=y CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_ONESHOT=y @@ -291,5 +292,4 @@ CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y CONFIG_CRYPTO_TWOFISH=y # CONFIG_CRYPTO_ANSI_CPRNG is not set -CONFIG_CRYPTO_DEV_TEGRA_AES=y CONFIG_CRC_CCITT=y diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile index 81cda39860c5c7ad90a6710727011ec79296e5d8..b48fa341648d1766a49bf4553e3149836d264c66 100644 --- a/arch/arm/crypto/Makefile +++ b/arch/arm/crypto/Makefile @@ -5,10 +5,14 @@ obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o obj-$(CONFIG_CRYPTO_AES_ARM_BS) += aes-arm-bs.o obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o +obj-$(CONFIG_CRYPTO_SHA1_ARM_NEON) += sha1-arm-neon.o +obj-$(CONFIG_CRYPTO_SHA512_ARM_NEON) += sha512-arm-neon.o aes-arm-y := aes-armv4.o aes_glue.o aes-arm-bs-y := aesbs-core.o aesbs-glue.o sha1-arm-y := sha1-armv4-large.o sha1_glue.o +sha1-arm-neon-y := sha1-armv7-neon.o sha1_neon_glue.o +sha512-arm-neon-y := sha512-armv7-neon.o sha512_neon_glue.o quiet_cmd_perl = PERL $@ cmd_perl = $(PERL) $(<) > $(@) diff --git a/arch/arm/crypto/aes-armv4.S b/arch/arm/crypto/aes-armv4.S index 3a14ea8fe97e5cac183ad8c9148b816e473b4ae5..ebb9761fb572b26e3d586ec238300d631151e6e1 100644 --- a/arch/arm/crypto/aes-armv4.S +++ b/arch/arm/crypto/aes-armv4.S @@ -35,6 +35,7 @@ @ that is being targetted. #include +#include .text @@ -648,7 +649,7 @@ _armv4_AES_set_encrypt_key: .Ldone: mov r0,#0 ldmia sp!,{r4-r12,lr} -.Labrt: mov pc,lr +.Labrt: ret lr ENDPROC(private_AES_set_encrypt_key) .align 5 diff --git a/arch/arm/crypto/sha1-armv7-neon.S b/arch/arm/crypto/sha1-armv7-neon.S new file mode 100644 index 0000000000000000000000000000000000000000..50013c0e2864d8a24ca7efc6a8da3f1e8b37f9c6 --- /dev/null +++ b/arch/arm/crypto/sha1-armv7-neon.S @@ -0,0 +1,634 @@ +/* sha1-armv7-neon.S - ARM/NEON accelerated SHA-1 transform function + * + * Copyright © 2013-2014 Jussi Kivilinna + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include + + +.syntax unified +.code 32 +.fpu neon + +.text + + +/* Context structure */ + +#define state_h0 0 +#define state_h1 4 +#define state_h2 8 +#define state_h3 12 +#define state_h4 16 + + +/* Constants */ + +#define K1 0x5A827999 +#define K2 0x6ED9EBA1 +#define K3 0x8F1BBCDC +#define K4 0xCA62C1D6 +.align 4 +.LK_VEC: +.LK1: .long K1, K1, K1, K1 +.LK2: .long K2, K2, K2, K2 +.LK3: .long K3, K3, K3, K3 +.LK4: .long K4, K4, K4, K4 + + +/* Register macros */ + +#define RSTATE r0 +#define RDATA r1 +#define RNBLKS r2 +#define ROLDSTACK r3 +#define RWK lr + +#define _a r4 +#define _b r5 +#define _c r6 +#define _d r7 +#define _e r8 + +#define RT0 r9 +#define RT1 r10 +#define RT2 r11 +#define RT3 r12 + +#define W0 q0 +#define W1 q1 +#define W2 q2 +#define W3 q3 +#define W4 q4 +#define W5 q5 +#define W6 q6 +#define W7 q7 + +#define tmp0 q8 +#define tmp1 q9 +#define tmp2 q10 +#define tmp3 q11 + +#define qK1 q12 +#define qK2 q13 +#define qK3 q14 +#define qK4 q15 + + +/* Round function macros. */ + +#define WK_offs(i) (((i) & 15) * 4) + +#define _R_F1(a,b,c,d,e,i,pre1,pre2,pre3,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + ldr RT3, [sp, WK_offs(i)]; \ + pre1(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + bic RT0, d, b; \ + add e, e, a, ror #(32 - 5); \ + and RT1, c, b; \ + pre2(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + add RT0, RT0, RT3; \ + add e, e, RT1; \ + ror b, #(32 - 30); \ + pre3(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + add e, e, RT0; + +#define _R_F2(a,b,c,d,e,i,pre1,pre2,pre3,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + ldr RT3, [sp, WK_offs(i)]; \ + pre1(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + eor RT0, d, b; \ + add e, e, a, ror #(32 - 5); \ + eor RT0, RT0, c; \ + pre2(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + add e, e, RT3; \ + ror b, #(32 - 30); \ + pre3(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + add e, e, RT0; \ + +#define _R_F3(a,b,c,d,e,i,pre1,pre2,pre3,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + ldr RT3, [sp, WK_offs(i)]; \ + pre1(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + eor RT0, b, c; \ + and RT1, b, c; \ + add e, e, a, ror #(32 - 5); \ + pre2(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + and RT0, RT0, d; \ + add RT1, RT1, RT3; \ + add e, e, RT0; \ + ror b, #(32 - 30); \ + pre3(i16,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28); \ + add e, e, RT1; + +#define _R_F4(a,b,c,d,e,i,pre1,pre2,pre3,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + _R_F2(a,b,c,d,e,i,pre1,pre2,pre3,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) + +#define _R(a,b,c,d,e,f,i,pre1,pre2,pre3,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + _R_##f(a,b,c,d,e,i,pre1,pre2,pre3,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) + +#define R(a,b,c,d,e,f,i) \ + _R_##f(a,b,c,d,e,i,dummy,dummy,dummy,i16,\ + W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) + +#define dummy(...) + + +/* Input expansion macros. */ + +/********* Precalc macros for rounds 0-15 *************************************/ + +#define W_PRECALC_00_15() \ + add RWK, sp, #(WK_offs(0)); \ + \ + vld1.32 {tmp0, tmp1}, [RDATA]!; \ + vrev32.8 W0, tmp0; /* big => little */ \ + vld1.32 {tmp2, tmp3}, [RDATA]!; \ + vadd.u32 tmp0, W0, curK; \ + vrev32.8 W7, tmp1; /* big => little */ \ + vrev32.8 W6, tmp2; /* big => little */ \ + vadd.u32 tmp1, W7, curK; \ + vrev32.8 W5, tmp3; /* big => little */ \ + vadd.u32 tmp2, W6, curK; \ + vst1.32 {tmp0, tmp1}, [RWK]!; \ + vadd.u32 tmp3, W5, curK; \ + vst1.32 {tmp2, tmp3}, [RWK]; \ + +#define WPRECALC_00_15_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vld1.32 {tmp0, tmp1}, [RDATA]!; \ + +#define WPRECALC_00_15_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + add RWK, sp, #(WK_offs(0)); \ + +#define WPRECALC_00_15_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vrev32.8 W0, tmp0; /* big => little */ \ + +#define WPRECALC_00_15_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vld1.32 {tmp2, tmp3}, [RDATA]!; \ + +#define WPRECALC_00_15_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vadd.u32 tmp0, W0, curK; \ + +#define WPRECALC_00_15_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vrev32.8 W7, tmp1; /* big => little */ \ + +#define WPRECALC_00_15_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vrev32.8 W6, tmp2; /* big => little */ \ + +#define WPRECALC_00_15_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vadd.u32 tmp1, W7, curK; \ + +#define WPRECALC_00_15_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vrev32.8 W5, tmp3; /* big => little */ \ + +#define WPRECALC_00_15_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vadd.u32 tmp2, W6, curK; \ + +#define WPRECALC_00_15_10(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vst1.32 {tmp0, tmp1}, [RWK]!; \ + +#define WPRECALC_00_15_11(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vadd.u32 tmp3, W5, curK; \ + +#define WPRECALC_00_15_12(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vst1.32 {tmp2, tmp3}, [RWK]; \ + + +/********* Precalc macros for rounds 16-31 ************************************/ + +#define WPRECALC_16_31_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor tmp0, tmp0; \ + vext.8 W, W_m16, W_m12, #8; \ + +#define WPRECALC_16_31_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + add RWK, sp, #(WK_offs(i)); \ + vext.8 tmp0, W_m04, tmp0, #4; \ + +#define WPRECALC_16_31_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor tmp0, tmp0, W_m16; \ + veor.32 W, W, W_m08; \ + +#define WPRECALC_16_31_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor tmp1, tmp1; \ + veor W, W, tmp0; \ + +#define WPRECALC_16_31_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vshl.u32 tmp0, W, #1; \ + +#define WPRECALC_16_31_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vext.8 tmp1, tmp1, W, #(16-12); \ + vshr.u32 W, W, #31; \ + +#define WPRECALC_16_31_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vorr tmp0, tmp0, W; \ + vshr.u32 W, tmp1, #30; \ + +#define WPRECALC_16_31_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vshl.u32 tmp1, tmp1, #2; \ + +#define WPRECALC_16_31_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor tmp0, tmp0, W; \ + +#define WPRECALC_16_31_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor W, tmp0, tmp1; \ + +#define WPRECALC_16_31_10(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vadd.u32 tmp0, W, curK; \ + +#define WPRECALC_16_31_11(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vst1.32 {tmp0}, [RWK]; + + +/********* Precalc macros for rounds 32-79 ************************************/ + +#define WPRECALC_32_79_0(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor W, W_m28; \ + +#define WPRECALC_32_79_1(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vext.8 tmp0, W_m08, W_m04, #8; \ + +#define WPRECALC_32_79_2(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor W, W_m16; \ + +#define WPRECALC_32_79_3(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + veor W, tmp0; \ + +#define WPRECALC_32_79_4(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + add RWK, sp, #(WK_offs(i&~3)); \ + +#define WPRECALC_32_79_5(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vshl.u32 tmp1, W, #2; \ + +#define WPRECALC_32_79_6(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vshr.u32 tmp0, W, #30; \ + +#define WPRECALC_32_79_7(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vorr W, tmp0, tmp1; \ + +#define WPRECALC_32_79_8(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vadd.u32 tmp0, W, curK; \ + +#define WPRECALC_32_79_9(i,W,W_m04,W_m08,W_m12,W_m16,W_m20,W_m24,W_m28) \ + vst1.32 {tmp0}, [RWK]; + + +/* + * Transform nblks*64 bytes (nblks*16 32-bit words) at DATA. + * + * unsigned int + * sha1_transform_neon (void *ctx, const unsigned char *data, + * unsigned int nblks) + */ +.align 3 +ENTRY(sha1_transform_neon) + /* input: + * r0: ctx, CTX + * r1: data (64*nblks bytes) + * r2: nblks + */ + + cmp RNBLKS, #0; + beq .Ldo_nothing; + + push {r4-r12, lr}; + /*vpush {q4-q7};*/ + + adr RT3, .LK_VEC; + + mov ROLDSTACK, sp; + + /* Align stack. */ + sub RT0, sp, #(16*4); + and RT0, #(~(16-1)); + mov sp, RT0; + + vld1.32 {qK1-qK2}, [RT3]!; /* Load K1,K2 */ + + /* Get the values of the chaining variables. */ + ldm RSTATE, {_a-_e}; + + vld1.32 {qK3-qK4}, [RT3]; /* Load K3,K4 */ + +#undef curK +#define curK qK1 + /* Precalc 0-15. */ + W_PRECALC_00_15(); + +.Loop: + /* Transform 0-15 + Precalc 16-31. */ + _R( _a, _b, _c, _d, _e, F1, 0, + WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 16, + W4, W5, W6, W7, W0, _, _, _ ); + _R( _e, _a, _b, _c, _d, F1, 1, + WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 16, + W4, W5, W6, W7, W0, _, _, _ ); + _R( _d, _e, _a, _b, _c, F1, 2, + WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 16, + W4, W5, W6, W7, W0, _, _, _ ); + _R( _c, _d, _e, _a, _b, F1, 3, + WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,16, + W4, W5, W6, W7, W0, _, _, _ ); + +#undef curK +#define curK qK2 + _R( _b, _c, _d, _e, _a, F1, 4, + WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 20, + W3, W4, W5, W6, W7, _, _, _ ); + _R( _a, _b, _c, _d, _e, F1, 5, + WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 20, + W3, W4, W5, W6, W7, _, _, _ ); + _R( _e, _a, _b, _c, _d, F1, 6, + WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 20, + W3, W4, W5, W6, W7, _, _, _ ); + _R( _d, _e, _a, _b, _c, F1, 7, + WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,20, + W3, W4, W5, W6, W7, _, _, _ ); + + _R( _c, _d, _e, _a, _b, F1, 8, + WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 24, + W2, W3, W4, W5, W6, _, _, _ ); + _R( _b, _c, _d, _e, _a, F1, 9, + WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 24, + W2, W3, W4, W5, W6, _, _, _ ); + _R( _a, _b, _c, _d, _e, F1, 10, + WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 24, + W2, W3, W4, W5, W6, _, _, _ ); + _R( _e, _a, _b, _c, _d, F1, 11, + WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,24, + W2, W3, W4, W5, W6, _, _, _ ); + + _R( _d, _e, _a, _b, _c, F1, 12, + WPRECALC_16_31_0, WPRECALC_16_31_1, WPRECALC_16_31_2, 28, + W1, W2, W3, W4, W5, _, _, _ ); + _R( _c, _d, _e, _a, _b, F1, 13, + WPRECALC_16_31_3, WPRECALC_16_31_4, WPRECALC_16_31_5, 28, + W1, W2, W3, W4, W5, _, _, _ ); + _R( _b, _c, _d, _e, _a, F1, 14, + WPRECALC_16_31_6, WPRECALC_16_31_7, WPRECALC_16_31_8, 28, + W1, W2, W3, W4, W5, _, _, _ ); + _R( _a, _b, _c, _d, _e, F1, 15, + WPRECALC_16_31_9, WPRECALC_16_31_10,WPRECALC_16_31_11,28, + W1, W2, W3, W4, W5, _, _, _ ); + + /* Transform 16-63 + Precalc 32-79. */ + _R( _e, _a, _b, _c, _d, F1, 16, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 32, + W0, W1, W2, W3, W4, W5, W6, W7); + _R( _d, _e, _a, _b, _c, F1, 17, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 32, + W0, W1, W2, W3, W4, W5, W6, W7); + _R( _c, _d, _e, _a, _b, F1, 18, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 32, + W0, W1, W2, W3, W4, W5, W6, W7); + _R( _b, _c, _d, _e, _a, F1, 19, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 32, + W0, W1, W2, W3, W4, W5, W6, W7); + + _R( _a, _b, _c, _d, _e, F2, 20, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 36, + W7, W0, W1, W2, W3, W4, W5, W6); + _R( _e, _a, _b, _c, _d, F2, 21, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 36, + W7, W0, W1, W2, W3, W4, W5, W6); + _R( _d, _e, _a, _b, _c, F2, 22, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 36, + W7, W0, W1, W2, W3, W4, W5, W6); + _R( _c, _d, _e, _a, _b, F2, 23, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 36, + W7, W0, W1, W2, W3, W4, W5, W6); + +#undef curK +#define curK qK3 + _R( _b, _c, _d, _e, _a, F2, 24, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 40, + W6, W7, W0, W1, W2, W3, W4, W5); + _R( _a, _b, _c, _d, _e, F2, 25, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 40, + W6, W7, W0, W1, W2, W3, W4, W5); + _R( _e, _a, _b, _c, _d, F2, 26, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 40, + W6, W7, W0, W1, W2, W3, W4, W5); + _R( _d, _e, _a, _b, _c, F2, 27, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 40, + W6, W7, W0, W1, W2, W3, W4, W5); + + _R( _c, _d, _e, _a, _b, F2, 28, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 44, + W5, W6, W7, W0, W1, W2, W3, W4); + _R( _b, _c, _d, _e, _a, F2, 29, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 44, + W5, W6, W7, W0, W1, W2, W3, W4); + _R( _a, _b, _c, _d, _e, F2, 30, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 44, + W5, W6, W7, W0, W1, W2, W3, W4); + _R( _e, _a, _b, _c, _d, F2, 31, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 44, + W5, W6, W7, W0, W1, W2, W3, W4); + + _R( _d, _e, _a, _b, _c, F2, 32, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 48, + W4, W5, W6, W7, W0, W1, W2, W3); + _R( _c, _d, _e, _a, _b, F2, 33, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 48, + W4, W5, W6, W7, W0, W1, W2, W3); + _R( _b, _c, _d, _e, _a, F2, 34, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 48, + W4, W5, W6, W7, W0, W1, W2, W3); + _R( _a, _b, _c, _d, _e, F2, 35, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 48, + W4, W5, W6, W7, W0, W1, W2, W3); + + _R( _e, _a, _b, _c, _d, F2, 36, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 52, + W3, W4, W5, W6, W7, W0, W1, W2); + _R( _d, _e, _a, _b, _c, F2, 37, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 52, + W3, W4, W5, W6, W7, W0, W1, W2); + _R( _c, _d, _e, _a, _b, F2, 38, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 52, + W3, W4, W5, W6, W7, W0, W1, W2); + _R( _b, _c, _d, _e, _a, F2, 39, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 52, + W3, W4, W5, W6, W7, W0, W1, W2); + + _R( _a, _b, _c, _d, _e, F3, 40, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 56, + W2, W3, W4, W5, W6, W7, W0, W1); + _R( _e, _a, _b, _c, _d, F3, 41, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 56, + W2, W3, W4, W5, W6, W7, W0, W1); + _R( _d, _e, _a, _b, _c, F3, 42, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 56, + W2, W3, W4, W5, W6, W7, W0, W1); + _R( _c, _d, _e, _a, _b, F3, 43, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 56, + W2, W3, W4, W5, W6, W7, W0, W1); + +#undef curK +#define curK qK4 + _R( _b, _c, _d, _e, _a, F3, 44, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 60, + W1, W2, W3, W4, W5, W6, W7, W0); + _R( _a, _b, _c, _d, _e, F3, 45, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 60, + W1, W2, W3, W4, W5, W6, W7, W0); + _R( _e, _a, _b, _c, _d, F3, 46, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 60, + W1, W2, W3, W4, W5, W6, W7, W0); + _R( _d, _e, _a, _b, _c, F3, 47, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 60, + W1, W2, W3, W4, W5, W6, W7, W0); + + _R( _c, _d, _e, _a, _b, F3, 48, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 64, + W0, W1, W2, W3, W4, W5, W6, W7); + _R( _b, _c, _d, _e, _a, F3, 49, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 64, + W0, W1, W2, W3, W4, W5, W6, W7); + _R( _a, _b, _c, _d, _e, F3, 50, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 64, + W0, W1, W2, W3, W4, W5, W6, W7); + _R( _e, _a, _b, _c, _d, F3, 51, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 64, + W0, W1, W2, W3, W4, W5, W6, W7); + + _R( _d, _e, _a, _b, _c, F3, 52, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 68, + W7, W0, W1, W2, W3, W4, W5, W6); + _R( _c, _d, _e, _a, _b, F3, 53, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 68, + W7, W0, W1, W2, W3, W4, W5, W6); + _R( _b, _c, _d, _e, _a, F3, 54, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 68, + W7, W0, W1, W2, W3, W4, W5, W6); + _R( _a, _b, _c, _d, _e, F3, 55, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 68, + W7, W0, W1, W2, W3, W4, W5, W6); + + _R( _e, _a, _b, _c, _d, F3, 56, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 72, + W6, W7, W0, W1, W2, W3, W4, W5); + _R( _d, _e, _a, _b, _c, F3, 57, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 72, + W6, W7, W0, W1, W2, W3, W4, W5); + _R( _c, _d, _e, _a, _b, F3, 58, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 72, + W6, W7, W0, W1, W2, W3, W4, W5); + _R( _b, _c, _d, _e, _a, F3, 59, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 72, + W6, W7, W0, W1, W2, W3, W4, W5); + + subs RNBLKS, #1; + + _R( _a, _b, _c, _d, _e, F4, 60, + WPRECALC_32_79_0, WPRECALC_32_79_1, WPRECALC_32_79_2, 76, + W5, W6, W7, W0, W1, W2, W3, W4); + _R( _e, _a, _b, _c, _d, F4, 61, + WPRECALC_32_79_3, WPRECALC_32_79_4, WPRECALC_32_79_5, 76, + W5, W6, W7, W0, W1, W2, W3, W4); + _R( _d, _e, _a, _b, _c, F4, 62, + WPRECALC_32_79_6, dummy, WPRECALC_32_79_7, 76, + W5, W6, W7, W0, W1, W2, W3, W4); + _R( _c, _d, _e, _a, _b, F4, 63, + WPRECALC_32_79_8, dummy, WPRECALC_32_79_9, 76, + W5, W6, W7, W0, W1, W2, W3, W4); + + beq .Lend; + + /* Transform 64-79 + Precalc 0-15 of next block. */ +#undef curK +#define curK qK1 + _R( _b, _c, _d, _e, _a, F4, 64, + WPRECALC_00_15_0, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _a, _b, _c, _d, _e, F4, 65, + WPRECALC_00_15_1, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _e, _a, _b, _c, _d, F4, 66, + WPRECALC_00_15_2, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _d, _e, _a, _b, _c, F4, 67, + WPRECALC_00_15_3, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + + _R( _c, _d, _e, _a, _b, F4, 68, + dummy, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _b, _c, _d, _e, _a, F4, 69, + dummy, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _a, _b, _c, _d, _e, F4, 70, + WPRECALC_00_15_4, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _e, _a, _b, _c, _d, F4, 71, + WPRECALC_00_15_5, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + + _R( _d, _e, _a, _b, _c, F4, 72, + dummy, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _c, _d, _e, _a, _b, F4, 73, + dummy, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _b, _c, _d, _e, _a, F4, 74, + WPRECALC_00_15_6, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _a, _b, _c, _d, _e, F4, 75, + WPRECALC_00_15_7, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + + _R( _e, _a, _b, _c, _d, F4, 76, + WPRECALC_00_15_8, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _d, _e, _a, _b, _c, F4, 77, + WPRECALC_00_15_9, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _c, _d, _e, _a, _b, F4, 78, + WPRECALC_00_15_10, dummy, dummy, _, _, _, _, _, _, _, _, _ ); + _R( _b, _c, _d, _e, _a, F4, 79, + WPRECALC_00_15_11, dummy, WPRECALC_00_15_12, _, _, _, _, _, _, _, _, _ ); + + /* Update the chaining variables. */ + ldm RSTATE, {RT0-RT3}; + add _a, RT0; + ldr RT0, [RSTATE, #state_h4]; + add _b, RT1; + add _c, RT2; + add _d, RT3; + add _e, RT0; + stm RSTATE, {_a-_e}; + + b .Loop; + +.Lend: + /* Transform 64-79 */ + R( _b, _c, _d, _e, _a, F4, 64 ); + R( _a, _b, _c, _d, _e, F4, 65 ); + R( _e, _a, _b, _c, _d, F4, 66 ); + R( _d, _e, _a, _b, _c, F4, 67 ); + R( _c, _d, _e, _a, _b, F4, 68 ); + R( _b, _c, _d, _e, _a, F4, 69 ); + R( _a, _b, _c, _d, _e, F4, 70 ); + R( _e, _a, _b, _c, _d, F4, 71 ); + R( _d, _e, _a, _b, _c, F4, 72 ); + R( _c, _d, _e, _a, _b, F4, 73 ); + R( _b, _c, _d, _e, _a, F4, 74 ); + R( _a, _b, _c, _d, _e, F4, 75 ); + R( _e, _a, _b, _c, _d, F4, 76 ); + R( _d, _e, _a, _b, _c, F4, 77 ); + R( _c, _d, _e, _a, _b, F4, 78 ); + R( _b, _c, _d, _e, _a, F4, 79 ); + + mov sp, ROLDSTACK; + + /* Update the chaining variables. */ + ldm RSTATE, {RT0-RT3}; + add _a, RT0; + ldr RT0, [RSTATE, #state_h4]; + add _b, RT1; + add _c, RT2; + add _d, RT3; + /*vpop {q4-q7};*/ + add _e, RT0; + stm RSTATE, {_a-_e}; + + pop {r4-r12, pc}; + +.Ldo_nothing: + bx lr +ENDPROC(sha1_transform_neon) diff --git a/arch/arm/crypto/sha1_glue.c b/arch/arm/crypto/sha1_glue.c index 76cd976230bc4b7558c18a50daaa5278fe85565f..84f2a756588be55ed6842f1120a562a75c31e8bb 100644 --- a/arch/arm/crypto/sha1_glue.c +++ b/arch/arm/crypto/sha1_glue.c @@ -23,32 +23,27 @@ #include #include #include +#include -struct SHA1_CTX { - uint32_t h0,h1,h2,h3,h4; - u64 count; - u8 data[SHA1_BLOCK_SIZE]; -}; -asmlinkage void sha1_block_data_order(struct SHA1_CTX *digest, +asmlinkage void sha1_block_data_order(u32 *digest, const unsigned char *data, unsigned int rounds); static int sha1_init(struct shash_desc *desc) { - struct SHA1_CTX *sctx = shash_desc_ctx(desc); - memset(sctx, 0, sizeof(*sctx)); - sctx->h0 = SHA1_H0; - sctx->h1 = SHA1_H1; - sctx->h2 = SHA1_H2; - sctx->h3 = SHA1_H3; - sctx->h4 = SHA1_H4; + struct sha1_state *sctx = shash_desc_ctx(desc); + + *sctx = (struct sha1_state){ + .state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 }, + }; + return 0; } -static int __sha1_update(struct SHA1_CTX *sctx, const u8 *data, - unsigned int len, unsigned int partial) +static int __sha1_update(struct sha1_state *sctx, const u8 *data, + unsigned int len, unsigned int partial) { unsigned int done = 0; @@ -56,43 +51,44 @@ static int __sha1_update(struct SHA1_CTX *sctx, const u8 *data, if (partial) { done = SHA1_BLOCK_SIZE - partial; - memcpy(sctx->data + partial, data, done); - sha1_block_data_order(sctx, sctx->data, 1); + memcpy(sctx->buffer + partial, data, done); + sha1_block_data_order(sctx->state, sctx->buffer, 1); } if (len - done >= SHA1_BLOCK_SIZE) { const unsigned int rounds = (len - done) / SHA1_BLOCK_SIZE; - sha1_block_data_order(sctx, data + done, rounds); + sha1_block_data_order(sctx->state, data + done, rounds); done += rounds * SHA1_BLOCK_SIZE; } - memcpy(sctx->data, data + done, len - done); + memcpy(sctx->buffer, data + done, len - done); return 0; } -static int sha1_update(struct shash_desc *desc, const u8 *data, - unsigned int len) +int sha1_update_arm(struct shash_desc *desc, const u8 *data, + unsigned int len) { - struct SHA1_CTX *sctx = shash_desc_ctx(desc); + struct sha1_state *sctx = shash_desc_ctx(desc); unsigned int partial = sctx->count % SHA1_BLOCK_SIZE; int res; /* Handle the fast case right here */ if (partial + len < SHA1_BLOCK_SIZE) { sctx->count += len; - memcpy(sctx->data + partial, data, len); + memcpy(sctx->buffer + partial, data, len); return 0; } res = __sha1_update(sctx, data, len, partial); return res; } +EXPORT_SYMBOL_GPL(sha1_update_arm); /* Add padding and return the message digest. */ static int sha1_final(struct shash_desc *desc, u8 *out) { - struct SHA1_CTX *sctx = shash_desc_ctx(desc); + struct sha1_state *sctx = shash_desc_ctx(desc); unsigned int i, index, padlen; __be32 *dst = (__be32 *)out; __be64 bits; @@ -106,7 +102,7 @@ static int sha1_final(struct shash_desc *desc, u8 *out) /* We need to fill a whole block for __sha1_update() */ if (padlen <= 56) { sctx->count += padlen; - memcpy(sctx->data + index, padding, padlen); + memcpy(sctx->buffer + index, padding, padlen); } else { __sha1_update(sctx, padding, padlen, index); } @@ -114,7 +110,7 @@ static int sha1_final(struct shash_desc *desc, u8 *out) /* Store state in digest */ for (i = 0; i < 5; i++) - dst[i] = cpu_to_be32(((u32 *)sctx)[i]); + dst[i] = cpu_to_be32(sctx->state[i]); /* Wipe context */ memset(sctx, 0, sizeof(*sctx)); @@ -124,7 +120,7 @@ static int sha1_final(struct shash_desc *desc, u8 *out) static int sha1_export(struct shash_desc *desc, void *out) { - struct SHA1_CTX *sctx = shash_desc_ctx(desc); + struct sha1_state *sctx = shash_desc_ctx(desc); memcpy(out, sctx, sizeof(*sctx)); return 0; } @@ -132,7 +128,7 @@ static int sha1_export(struct shash_desc *desc, void *out) static int sha1_import(struct shash_desc *desc, const void *in) { - struct SHA1_CTX *sctx = shash_desc_ctx(desc); + struct sha1_state *sctx = shash_desc_ctx(desc); memcpy(sctx, in, sizeof(*sctx)); return 0; } @@ -141,12 +137,12 @@ static int sha1_import(struct shash_desc *desc, const void *in) static struct shash_alg alg = { .digestsize = SHA1_DIGEST_SIZE, .init = sha1_init, - .update = sha1_update, + .update = sha1_update_arm, .final = sha1_final, .export = sha1_export, .import = sha1_import, - .descsize = sizeof(struct SHA1_CTX), - .statesize = sizeof(struct SHA1_CTX), + .descsize = sizeof(struct sha1_state), + .statesize = sizeof(struct sha1_state), .base = { .cra_name = "sha1", .cra_driver_name= "sha1-asm", diff --git a/arch/arm/crypto/sha1_neon_glue.c b/arch/arm/crypto/sha1_neon_glue.c new file mode 100644 index 0000000000000000000000000000000000000000..6f1b411b1d55440b62ff7959b15ac7c9e9cb09d5 --- /dev/null +++ b/arch/arm/crypto/sha1_neon_glue.c @@ -0,0 +1,197 @@ +/* + * Glue code for the SHA1 Secure Hash Algorithm assembler implementation using + * ARM NEON instructions. + * + * Copyright © 2014 Jussi Kivilinna + * + * This file is based on sha1_generic.c and sha1_ssse3_glue.c: + * Copyright (c) Alan Smithee. + * Copyright (c) Andrew McDonald + * Copyright (c) Jean-Francois Dive + * Copyright (c) Mathias Krause + * Copyright (c) Chandramouli Narayanan + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +asmlinkage void sha1_transform_neon(void *state_h, const char *data, + unsigned int rounds); + + +static int sha1_neon_init(struct shash_desc *desc) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + *sctx = (struct sha1_state){ + .state = { SHA1_H0, SHA1_H1, SHA1_H2, SHA1_H3, SHA1_H4 }, + }; + + return 0; +} + +static int __sha1_neon_update(struct shash_desc *desc, const u8 *data, + unsigned int len, unsigned int partial) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + unsigned int done = 0; + + sctx->count += len; + + if (partial) { + done = SHA1_BLOCK_SIZE - partial; + memcpy(sctx->buffer + partial, data, done); + sha1_transform_neon(sctx->state, sctx->buffer, 1); + } + + if (len - done >= SHA1_BLOCK_SIZE) { + const unsigned int rounds = (len - done) / SHA1_BLOCK_SIZE; + + sha1_transform_neon(sctx->state, data + done, rounds); + done += rounds * SHA1_BLOCK_SIZE; + } + + memcpy(sctx->buffer, data + done, len - done); + + return 0; +} + +static int sha1_neon_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + unsigned int partial = sctx->count % SHA1_BLOCK_SIZE; + int res; + + /* Handle the fast case right here */ + if (partial + len < SHA1_BLOCK_SIZE) { + sctx->count += len; + memcpy(sctx->buffer + partial, data, len); + + return 0; + } + + if (!may_use_simd()) { + res = sha1_update_arm(desc, data, len); + } else { + kernel_neon_begin(); + res = __sha1_neon_update(desc, data, len, partial); + kernel_neon_end(); + } + + return res; +} + + +/* Add padding and return the message digest. */ +static int sha1_neon_final(struct shash_desc *desc, u8 *out) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + unsigned int i, index, padlen; + __be32 *dst = (__be32 *)out; + __be64 bits; + static const u8 padding[SHA1_BLOCK_SIZE] = { 0x80, }; + + bits = cpu_to_be64(sctx->count << 3); + + /* Pad out to 56 mod 64 and append length */ + index = sctx->count % SHA1_BLOCK_SIZE; + padlen = (index < 56) ? (56 - index) : ((SHA1_BLOCK_SIZE+56) - index); + if (!may_use_simd()) { + sha1_update_arm(desc, padding, padlen); + sha1_update_arm(desc, (const u8 *)&bits, sizeof(bits)); + } else { + kernel_neon_begin(); + /* We need to fill a whole block for __sha1_neon_update() */ + if (padlen <= 56) { + sctx->count += padlen; + memcpy(sctx->buffer + index, padding, padlen); + } else { + __sha1_neon_update(desc, padding, padlen, index); + } + __sha1_neon_update(desc, (const u8 *)&bits, sizeof(bits), 56); + kernel_neon_end(); + } + + /* Store state in digest */ + for (i = 0; i < 5; i++) + dst[i] = cpu_to_be32(sctx->state[i]); + + /* Wipe context */ + memset(sctx, 0, sizeof(*sctx)); + + return 0; +} + +static int sha1_neon_export(struct shash_desc *desc, void *out) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + memcpy(out, sctx, sizeof(*sctx)); + + return 0; +} + +static int sha1_neon_import(struct shash_desc *desc, const void *in) +{ + struct sha1_state *sctx = shash_desc_ctx(desc); + + memcpy(sctx, in, sizeof(*sctx)); + + return 0; +} + +static struct shash_alg alg = { + .digestsize = SHA1_DIGEST_SIZE, + .init = sha1_neon_init, + .update = sha1_neon_update, + .final = sha1_neon_final, + .export = sha1_neon_export, + .import = sha1_neon_import, + .descsize = sizeof(struct sha1_state), + .statesize = sizeof(struct sha1_state), + .base = { + .cra_name = "sha1", + .cra_driver_name = "sha1-neon", + .cra_priority = 250, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}; + +static int __init sha1_neon_mod_init(void) +{ + if (!cpu_has_neon()) + return -ENODEV; + + return crypto_register_shash(&alg); +} + +static void __exit sha1_neon_mod_fini(void) +{ + crypto_unregister_shash(&alg); +} + +module_init(sha1_neon_mod_init); +module_exit(sha1_neon_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm, NEON accelerated"); +MODULE_ALIAS("sha1"); diff --git a/arch/arm/crypto/sha512-armv7-neon.S b/arch/arm/crypto/sha512-armv7-neon.S new file mode 100644 index 0000000000000000000000000000000000000000..fe99472e507c69edede998c1f7840850fa0ecd86 --- /dev/null +++ b/arch/arm/crypto/sha512-armv7-neon.S @@ -0,0 +1,455 @@ +/* sha512-armv7-neon.S - ARM/NEON assembly implementation of SHA-512 transform + * + * Copyright © 2013-2014 Jussi Kivilinna + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + */ + +#include + + +.syntax unified +.code 32 +.fpu neon + +.text + +/* structure of SHA512_CONTEXT */ +#define hd_a 0 +#define hd_b ((hd_a) + 8) +#define hd_c ((hd_b) + 8) +#define hd_d ((hd_c) + 8) +#define hd_e ((hd_d) + 8) +#define hd_f ((hd_e) + 8) +#define hd_g ((hd_f) + 8) + +/* register macros */ +#define RK %r2 + +#define RA d0 +#define RB d1 +#define RC d2 +#define RD d3 +#define RE d4 +#define RF d5 +#define RG d6 +#define RH d7 + +#define RT0 d8 +#define RT1 d9 +#define RT2 d10 +#define RT3 d11 +#define RT4 d12 +#define RT5 d13 +#define RT6 d14 +#define RT7 d15 + +#define RT01q q4 +#define RT23q q5 +#define RT45q q6 +#define RT67q q7 + +#define RW0 d16 +#define RW1 d17 +#define RW2 d18 +#define RW3 d19 +#define RW4 d20 +#define RW5 d21 +#define RW6 d22 +#define RW7 d23 +#define RW8 d24 +#define RW9 d25 +#define RW10 d26 +#define RW11 d27 +#define RW12 d28 +#define RW13 d29 +#define RW14 d30 +#define RW15 d31 + +#define RW01q q8 +#define RW23q q9 +#define RW45q q10 +#define RW67q q11 +#define RW89q q12 +#define RW1011q q13 +#define RW1213q q14 +#define RW1415q q15 + +/*********************************************************************** + * ARM assembly implementation of sha512 transform + ***********************************************************************/ +#define rounds2_0_63(ra, rb, rc, rd, re, rf, rg, rh, rw0, rw1, rw01q, rw2, \ + rw23q, rw1415q, rw9, rw10, interleave_op, arg1) \ + /* t1 = h + Sum1 (e) + Ch (e, f, g) + k[t] + w[t]; */ \ + vshr.u64 RT2, re, #14; \ + vshl.u64 RT3, re, #64 - 14; \ + interleave_op(arg1); \ + vshr.u64 RT4, re, #18; \ + vshl.u64 RT5, re, #64 - 18; \ + vld1.64 {RT0}, [RK]!; \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, re, #41; \ + vshl.u64 RT5, re, #64 - 41; \ + vadd.u64 RT0, RT0, rw0; \ + veor.64 RT23q, RT23q, RT45q; \ + vmov.64 RT7, re; \ + veor.64 RT1, RT2, RT3; \ + vbsl.64 RT7, rf, rg; \ + \ + vadd.u64 RT1, RT1, rh; \ + vshr.u64 RT2, ra, #28; \ + vshl.u64 RT3, ra, #64 - 28; \ + vadd.u64 RT1, RT1, RT0; \ + vshr.u64 RT4, ra, #34; \ + vshl.u64 RT5, ra, #64 - 34; \ + vadd.u64 RT1, RT1, RT7; \ + \ + /* h = Sum0 (a) + Maj (a, b, c); */ \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, ra, #39; \ + vshl.u64 RT5, ra, #64 - 39; \ + veor.64 RT0, ra, rb; \ + veor.64 RT23q, RT23q, RT45q; \ + vbsl.64 RT0, rc, rb; \ + vadd.u64 rd, rd, RT1; /* d+=t1; */ \ + veor.64 rh, RT2, RT3; \ + \ + /* t1 = g + Sum1 (d) + Ch (d, e, f) + k[t] + w[t]; */ \ + vshr.u64 RT2, rd, #14; \ + vshl.u64 RT3, rd, #64 - 14; \ + vadd.u64 rh, rh, RT0; \ + vshr.u64 RT4, rd, #18; \ + vshl.u64 RT5, rd, #64 - 18; \ + vadd.u64 rh, rh, RT1; /* h+=t1; */ \ + vld1.64 {RT0}, [RK]!; \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, rd, #41; \ + vshl.u64 RT5, rd, #64 - 41; \ + vadd.u64 RT0, RT0, rw1; \ + veor.64 RT23q, RT23q, RT45q; \ + vmov.64 RT7, rd; \ + veor.64 RT1, RT2, RT3; \ + vbsl.64 RT7, re, rf; \ + \ + vadd.u64 RT1, RT1, rg; \ + vshr.u64 RT2, rh, #28; \ + vshl.u64 RT3, rh, #64 - 28; \ + vadd.u64 RT1, RT1, RT0; \ + vshr.u64 RT4, rh, #34; \ + vshl.u64 RT5, rh, #64 - 34; \ + vadd.u64 RT1, RT1, RT7; \ + \ + /* g = Sum0 (h) + Maj (h, a, b); */ \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, rh, #39; \ + vshl.u64 RT5, rh, #64 - 39; \ + veor.64 RT0, rh, ra; \ + veor.64 RT23q, RT23q, RT45q; \ + vbsl.64 RT0, rb, ra; \ + vadd.u64 rc, rc, RT1; /* c+=t1; */ \ + veor.64 rg, RT2, RT3; \ + \ + /* w[0] += S1 (w[14]) + w[9] + S0 (w[1]); */ \ + /* w[1] += S1 (w[15]) + w[10] + S0 (w[2]); */ \ + \ + /**** S0(w[1:2]) */ \ + \ + /* w[0:1] += w[9:10] */ \ + /* RT23q = rw1:rw2 */ \ + vext.u64 RT23q, rw01q, rw23q, #1; \ + vadd.u64 rw0, rw9; \ + vadd.u64 rg, rg, RT0; \ + vadd.u64 rw1, rw10;\ + vadd.u64 rg, rg, RT1; /* g+=t1; */ \ + \ + vshr.u64 RT45q, RT23q, #1; \ + vshl.u64 RT67q, RT23q, #64 - 1; \ + vshr.u64 RT01q, RT23q, #8; \ + veor.u64 RT45q, RT45q, RT67q; \ + vshl.u64 RT67q, RT23q, #64 - 8; \ + veor.u64 RT45q, RT45q, RT01q; \ + vshr.u64 RT01q, RT23q, #7; \ + veor.u64 RT45q, RT45q, RT67q; \ + \ + /**** S1(w[14:15]) */ \ + vshr.u64 RT23q, rw1415q, #6; \ + veor.u64 RT01q, RT01q, RT45q; \ + vshr.u64 RT45q, rw1415q, #19; \ + vshl.u64 RT67q, rw1415q, #64 - 19; \ + veor.u64 RT23q, RT23q, RT45q; \ + vshr.u64 RT45q, rw1415q, #61; \ + veor.u64 RT23q, RT23q, RT67q; \ + vshl.u64 RT67q, rw1415q, #64 - 61; \ + veor.u64 RT23q, RT23q, RT45q; \ + vadd.u64 rw01q, RT01q; /* w[0:1] += S(w[1:2]) */ \ + veor.u64 RT01q, RT23q, RT67q; +#define vadd_RT01q(rw01q) \ + /* w[0:1] += S(w[14:15]) */ \ + vadd.u64 rw01q, RT01q; + +#define dummy(_) /*_*/ + +#define rounds2_64_79(ra, rb, rc, rd, re, rf, rg, rh, rw0, rw1, \ + interleave_op1, arg1, interleave_op2, arg2) \ + /* t1 = h + Sum1 (e) + Ch (e, f, g) + k[t] + w[t]; */ \ + vshr.u64 RT2, re, #14; \ + vshl.u64 RT3, re, #64 - 14; \ + interleave_op1(arg1); \ + vshr.u64 RT4, re, #18; \ + vshl.u64 RT5, re, #64 - 18; \ + interleave_op2(arg2); \ + vld1.64 {RT0}, [RK]!; \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, re, #41; \ + vshl.u64 RT5, re, #64 - 41; \ + vadd.u64 RT0, RT0, rw0; \ + veor.64 RT23q, RT23q, RT45q; \ + vmov.64 RT7, re; \ + veor.64 RT1, RT2, RT3; \ + vbsl.64 RT7, rf, rg; \ + \ + vadd.u64 RT1, RT1, rh; \ + vshr.u64 RT2, ra, #28; \ + vshl.u64 RT3, ra, #64 - 28; \ + vadd.u64 RT1, RT1, RT0; \ + vshr.u64 RT4, ra, #34; \ + vshl.u64 RT5, ra, #64 - 34; \ + vadd.u64 RT1, RT1, RT7; \ + \ + /* h = Sum0 (a) + Maj (a, b, c); */ \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, ra, #39; \ + vshl.u64 RT5, ra, #64 - 39; \ + veor.64 RT0, ra, rb; \ + veor.64 RT23q, RT23q, RT45q; \ + vbsl.64 RT0, rc, rb; \ + vadd.u64 rd, rd, RT1; /* d+=t1; */ \ + veor.64 rh, RT2, RT3; \ + \ + /* t1 = g + Sum1 (d) + Ch (d, e, f) + k[t] + w[t]; */ \ + vshr.u64 RT2, rd, #14; \ + vshl.u64 RT3, rd, #64 - 14; \ + vadd.u64 rh, rh, RT0; \ + vshr.u64 RT4, rd, #18; \ + vshl.u64 RT5, rd, #64 - 18; \ + vadd.u64 rh, rh, RT1; /* h+=t1; */ \ + vld1.64 {RT0}, [RK]!; \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, rd, #41; \ + vshl.u64 RT5, rd, #64 - 41; \ + vadd.u64 RT0, RT0, rw1; \ + veor.64 RT23q, RT23q, RT45q; \ + vmov.64 RT7, rd; \ + veor.64 RT1, RT2, RT3; \ + vbsl.64 RT7, re, rf; \ + \ + vadd.u64 RT1, RT1, rg; \ + vshr.u64 RT2, rh, #28; \ + vshl.u64 RT3, rh, #64 - 28; \ + vadd.u64 RT1, RT1, RT0; \ + vshr.u64 RT4, rh, #34; \ + vshl.u64 RT5, rh, #64 - 34; \ + vadd.u64 RT1, RT1, RT7; \ + \ + /* g = Sum0 (h) + Maj (h, a, b); */ \ + veor.64 RT23q, RT23q, RT45q; \ + vshr.u64 RT4, rh, #39; \ + vshl.u64 RT5, rh, #64 - 39; \ + veor.64 RT0, rh, ra; \ + veor.64 RT23q, RT23q, RT45q; \ + vbsl.64 RT0, rb, ra; \ + vadd.u64 rc, rc, RT1; /* c+=t1; */ \ + veor.64 rg, RT2, RT3; +#define vadd_rg_RT0(rg) \ + vadd.u64 rg, rg, RT0; +#define vadd_rg_RT1(rg) \ + vadd.u64 rg, rg, RT1; /* g+=t1; */ + +.align 3 +ENTRY(sha512_transform_neon) + /* Input: + * %r0: SHA512_CONTEXT + * %r1: data + * %r2: u64 k[] constants + * %r3: nblks + */ + push {%lr}; + + mov %lr, #0; + + /* Load context to d0-d7 */ + vld1.64 {RA-RD}, [%r0]!; + vld1.64 {RE-RH}, [%r0]; + sub %r0, #(4*8); + + /* Load input to w[16], d16-d31 */ + /* NOTE: Assumes that on ARMv7 unaligned accesses are always allowed. */ + vld1.64 {RW0-RW3}, [%r1]!; + vld1.64 {RW4-RW7}, [%r1]!; + vld1.64 {RW8-RW11}, [%r1]!; + vld1.64 {RW12-RW15}, [%r1]!; +#ifdef __ARMEL__ + /* byteswap */ + vrev64.8 RW01q, RW01q; + vrev64.8 RW23q, RW23q; + vrev64.8 RW45q, RW45q; + vrev64.8 RW67q, RW67q; + vrev64.8 RW89q, RW89q; + vrev64.8 RW1011q, RW1011q; + vrev64.8 RW1213q, RW1213q; + vrev64.8 RW1415q, RW1415q; +#endif + + /* EABI says that d8-d15 must be preserved by callee. */ + /*vpush {RT0-RT7};*/ + +.Loop: + rounds2_0_63(RA, RB, RC, RD, RE, RF, RG, RH, RW0, RW1, RW01q, RW2, + RW23q, RW1415q, RW9, RW10, dummy, _); + b .Lenter_rounds; + +.Loop_rounds: + rounds2_0_63(RA, RB, RC, RD, RE, RF, RG, RH, RW0, RW1, RW01q, RW2, + RW23q, RW1415q, RW9, RW10, vadd_RT01q, RW1415q); +.Lenter_rounds: + rounds2_0_63(RG, RH, RA, RB, RC, RD, RE, RF, RW2, RW3, RW23q, RW4, + RW45q, RW01q, RW11, RW12, vadd_RT01q, RW01q); + rounds2_0_63(RE, RF, RG, RH, RA, RB, RC, RD, RW4, RW5, RW45q, RW6, + RW67q, RW23q, RW13, RW14, vadd_RT01q, RW23q); + rounds2_0_63(RC, RD, RE, RF, RG, RH, RA, RB, RW6, RW7, RW67q, RW8, + RW89q, RW45q, RW15, RW0, vadd_RT01q, RW45q); + rounds2_0_63(RA, RB, RC, RD, RE, RF, RG, RH, RW8, RW9, RW89q, RW10, + RW1011q, RW67q, RW1, RW2, vadd_RT01q, RW67q); + rounds2_0_63(RG, RH, RA, RB, RC, RD, RE, RF, RW10, RW11, RW1011q, RW12, + RW1213q, RW89q, RW3, RW4, vadd_RT01q, RW89q); + add %lr, #16; + rounds2_0_63(RE, RF, RG, RH, RA, RB, RC, RD, RW12, RW13, RW1213q, RW14, + RW1415q, RW1011q, RW5, RW6, vadd_RT01q, RW1011q); + cmp %lr, #64; + rounds2_0_63(RC, RD, RE, RF, RG, RH, RA, RB, RW14, RW15, RW1415q, RW0, + RW01q, RW1213q, RW7, RW8, vadd_RT01q, RW1213q); + bne .Loop_rounds; + + subs %r3, #1; + + rounds2_64_79(RA, RB, RC, RD, RE, RF, RG, RH, RW0, RW1, + vadd_RT01q, RW1415q, dummy, _); + rounds2_64_79(RG, RH, RA, RB, RC, RD, RE, RF, RW2, RW3, + vadd_rg_RT0, RG, vadd_rg_RT1, RG); + beq .Lhandle_tail; + vld1.64 {RW0-RW3}, [%r1]!; + rounds2_64_79(RE, RF, RG, RH, RA, RB, RC, RD, RW4, RW5, + vadd_rg_RT0, RE, vadd_rg_RT1, RE); + rounds2_64_79(RC, RD, RE, RF, RG, RH, RA, RB, RW6, RW7, + vadd_rg_RT0, RC, vadd_rg_RT1, RC); +#ifdef __ARMEL__ + vrev64.8 RW01q, RW01q; + vrev64.8 RW23q, RW23q; +#endif + vld1.64 {RW4-RW7}, [%r1]!; + rounds2_64_79(RA, RB, RC, RD, RE, RF, RG, RH, RW8, RW9, + vadd_rg_RT0, RA, vadd_rg_RT1, RA); + rounds2_64_79(RG, RH, RA, RB, RC, RD, RE, RF, RW10, RW11, + vadd_rg_RT0, RG, vadd_rg_RT1, RG); +#ifdef __ARMEL__ + vrev64.8 RW45q, RW45q; + vrev64.8 RW67q, RW67q; +#endif + vld1.64 {RW8-RW11}, [%r1]!; + rounds2_64_79(RE, RF, RG, RH, RA, RB, RC, RD, RW12, RW13, + vadd_rg_RT0, RE, vadd_rg_RT1, RE); + rounds2_64_79(RC, RD, RE, RF, RG, RH, RA, RB, RW14, RW15, + vadd_rg_RT0, RC, vadd_rg_RT1, RC); +#ifdef __ARMEL__ + vrev64.8 RW89q, RW89q; + vrev64.8 RW1011q, RW1011q; +#endif + vld1.64 {RW12-RW15}, [%r1]!; + vadd_rg_RT0(RA); + vadd_rg_RT1(RA); + + /* Load context */ + vld1.64 {RT0-RT3}, [%r0]!; + vld1.64 {RT4-RT7}, [%r0]; + sub %r0, #(4*8); + +#ifdef __ARMEL__ + vrev64.8 RW1213q, RW1213q; + vrev64.8 RW1415q, RW1415q; +#endif + + vadd.u64 RA, RT0; + vadd.u64 RB, RT1; + vadd.u64 RC, RT2; + vadd.u64 RD, RT3; + vadd.u64 RE, RT4; + vadd.u64 RF, RT5; + vadd.u64 RG, RT6; + vadd.u64 RH, RT7; + + /* Store the first half of context */ + vst1.64 {RA-RD}, [%r0]!; + sub RK, $(8*80); + vst1.64 {RE-RH}, [%r0]; /* Store the last half of context */ + mov %lr, #0; + sub %r0, #(4*8); + + b .Loop; + +.Lhandle_tail: + rounds2_64_79(RE, RF, RG, RH, RA, RB, RC, RD, RW4, RW5, + vadd_rg_RT0, RE, vadd_rg_RT1, RE); + rounds2_64_79(RC, RD, RE, RF, RG, RH, RA, RB, RW6, RW7, + vadd_rg_RT0, RC, vadd_rg_RT1, RC); + rounds2_64_79(RA, RB, RC, RD, RE, RF, RG, RH, RW8, RW9, + vadd_rg_RT0, RA, vadd_rg_RT1, RA); + rounds2_64_79(RG, RH, RA, RB, RC, RD, RE, RF, RW10, RW11, + vadd_rg_RT0, RG, vadd_rg_RT1, RG); + rounds2_64_79(RE, RF, RG, RH, RA, RB, RC, RD, RW12, RW13, + vadd_rg_RT0, RE, vadd_rg_RT1, RE); + rounds2_64_79(RC, RD, RE, RF, RG, RH, RA, RB, RW14, RW15, + vadd_rg_RT0, RC, vadd_rg_RT1, RC); + + /* Load context to d16-d23 */ + vld1.64 {RW0-RW3}, [%r0]!; + vadd_rg_RT0(RA); + vld1.64 {RW4-RW7}, [%r0]; + vadd_rg_RT1(RA); + sub %r0, #(4*8); + + vadd.u64 RA, RW0; + vadd.u64 RB, RW1; + vadd.u64 RC, RW2; + vadd.u64 RD, RW3; + vadd.u64 RE, RW4; + vadd.u64 RF, RW5; + vadd.u64 RG, RW6; + vadd.u64 RH, RW7; + + /* Store the first half of context */ + vst1.64 {RA-RD}, [%r0]!; + + /* Clear used registers */ + /* d16-d31 */ + veor.u64 RW01q, RW01q; + veor.u64 RW23q, RW23q; + veor.u64 RW45q, RW45q; + veor.u64 RW67q, RW67q; + vst1.64 {RE-RH}, [%r0]; /* Store the last half of context */ + veor.u64 RW89q, RW89q; + veor.u64 RW1011q, RW1011q; + veor.u64 RW1213q, RW1213q; + veor.u64 RW1415q, RW1415q; + /* d8-d15 */ + /*vpop {RT0-RT7};*/ + /* d0-d7 (q0-q3) */ + veor.u64 %q0, %q0; + veor.u64 %q1, %q1; + veor.u64 %q2, %q2; + veor.u64 %q3, %q3; + + pop {%pc}; +ENDPROC(sha512_transform_neon) diff --git a/arch/arm/crypto/sha512_neon_glue.c b/arch/arm/crypto/sha512_neon_glue.c new file mode 100644 index 0000000000000000000000000000000000000000..0d2758ff5e12ec903ca9fca031f229dd1501b00e --- /dev/null +++ b/arch/arm/crypto/sha512_neon_glue.c @@ -0,0 +1,305 @@ +/* + * Glue code for the SHA512 Secure Hash Algorithm assembly implementation + * using NEON instructions. + * + * Copyright © 2014 Jussi Kivilinna + * + * This file is based on sha512_ssse3_glue.c: + * Copyright (C) 2013 Intel Corporation + * Author: Tim Chen + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +static const u64 sha512_k[] = { + 0x428a2f98d728ae22ULL, 0x7137449123ef65cdULL, + 0xb5c0fbcfec4d3b2fULL, 0xe9b5dba58189dbbcULL, + 0x3956c25bf348b538ULL, 0x59f111f1b605d019ULL, + 0x923f82a4af194f9bULL, 0xab1c5ed5da6d8118ULL, + 0xd807aa98a3030242ULL, 0x12835b0145706fbeULL, + 0x243185be4ee4b28cULL, 0x550c7dc3d5ffb4e2ULL, + 0x72be5d74f27b896fULL, 0x80deb1fe3b1696b1ULL, + 0x9bdc06a725c71235ULL, 0xc19bf174cf692694ULL, + 0xe49b69c19ef14ad2ULL, 0xefbe4786384f25e3ULL, + 0x0fc19dc68b8cd5b5ULL, 0x240ca1cc77ac9c65ULL, + 0x2de92c6f592b0275ULL, 0x4a7484aa6ea6e483ULL, + 0x5cb0a9dcbd41fbd4ULL, 0x76f988da831153b5ULL, + 0x983e5152ee66dfabULL, 0xa831c66d2db43210ULL, + 0xb00327c898fb213fULL, 0xbf597fc7beef0ee4ULL, + 0xc6e00bf33da88fc2ULL, 0xd5a79147930aa725ULL, + 0x06ca6351e003826fULL, 0x142929670a0e6e70ULL, + 0x27b70a8546d22ffcULL, 0x2e1b21385c26c926ULL, + 0x4d2c6dfc5ac42aedULL, 0x53380d139d95b3dfULL, + 0x650a73548baf63deULL, 0x766a0abb3c77b2a8ULL, + 0x81c2c92e47edaee6ULL, 0x92722c851482353bULL, + 0xa2bfe8a14cf10364ULL, 0xa81a664bbc423001ULL, + 0xc24b8b70d0f89791ULL, 0xc76c51a30654be30ULL, + 0xd192e819d6ef5218ULL, 0xd69906245565a910ULL, + 0xf40e35855771202aULL, 0x106aa07032bbd1b8ULL, + 0x19a4c116b8d2d0c8ULL, 0x1e376c085141ab53ULL, + 0x2748774cdf8eeb99ULL, 0x34b0bcb5e19b48a8ULL, + 0x391c0cb3c5c95a63ULL, 0x4ed8aa4ae3418acbULL, + 0x5b9cca4f7763e373ULL, 0x682e6ff3d6b2b8a3ULL, + 0x748f82ee5defb2fcULL, 0x78a5636f43172f60ULL, + 0x84c87814a1f0ab72ULL, 0x8cc702081a6439ecULL, + 0x90befffa23631e28ULL, 0xa4506cebde82bde9ULL, + 0xbef9a3f7b2c67915ULL, 0xc67178f2e372532bULL, + 0xca273eceea26619cULL, 0xd186b8c721c0c207ULL, + 0xeada7dd6cde0eb1eULL, 0xf57d4f7fee6ed178ULL, + 0x06f067aa72176fbaULL, 0x0a637dc5a2c898a6ULL, + 0x113f9804bef90daeULL, 0x1b710b35131c471bULL, + 0x28db77f523047d84ULL, 0x32caab7b40c72493ULL, + 0x3c9ebe0a15c9bebcULL, 0x431d67c49c100d4cULL, + 0x4cc5d4becb3e42b6ULL, 0x597f299cfc657e2aULL, + 0x5fcb6fab3ad6faecULL, 0x6c44198c4a475817ULL +}; + + +asmlinkage void sha512_transform_neon(u64 *digest, const void *data, + const u64 k[], unsigned int num_blks); + + +static int sha512_neon_init(struct shash_desc *desc) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + + sctx->state[0] = SHA512_H0; + sctx->state[1] = SHA512_H1; + sctx->state[2] = SHA512_H2; + sctx->state[3] = SHA512_H3; + sctx->state[4] = SHA512_H4; + sctx->state[5] = SHA512_H5; + sctx->state[6] = SHA512_H6; + sctx->state[7] = SHA512_H7; + sctx->count[0] = sctx->count[1] = 0; + + return 0; +} + +static int __sha512_neon_update(struct shash_desc *desc, const u8 *data, + unsigned int len, unsigned int partial) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + unsigned int done = 0; + + sctx->count[0] += len; + if (sctx->count[0] < len) + sctx->count[1]++; + + if (partial) { + done = SHA512_BLOCK_SIZE - partial; + memcpy(sctx->buf + partial, data, done); + sha512_transform_neon(sctx->state, sctx->buf, sha512_k, 1); + } + + if (len - done >= SHA512_BLOCK_SIZE) { + const unsigned int rounds = (len - done) / SHA512_BLOCK_SIZE; + + sha512_transform_neon(sctx->state, data + done, sha512_k, + rounds); + + done += rounds * SHA512_BLOCK_SIZE; + } + + memcpy(sctx->buf, data + done, len - done); + + return 0; +} + +static int sha512_neon_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + unsigned int partial = sctx->count[0] % SHA512_BLOCK_SIZE; + int res; + + /* Handle the fast case right here */ + if (partial + len < SHA512_BLOCK_SIZE) { + sctx->count[0] += len; + if (sctx->count[0] < len) + sctx->count[1]++; + memcpy(sctx->buf + partial, data, len); + + return 0; + } + + if (!may_use_simd()) { + res = crypto_sha512_update(desc, data, len); + } else { + kernel_neon_begin(); + res = __sha512_neon_update(desc, data, len, partial); + kernel_neon_end(); + } + + return res; +} + + +/* Add padding and return the message digest. */ +static int sha512_neon_final(struct shash_desc *desc, u8 *out) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + unsigned int i, index, padlen; + __be64 *dst = (__be64 *)out; + __be64 bits[2]; + static const u8 padding[SHA512_BLOCK_SIZE] = { 0x80, }; + + /* save number of bits */ + bits[1] = cpu_to_be64(sctx->count[0] << 3); + bits[0] = cpu_to_be64(sctx->count[1] << 3 | sctx->count[0] >> 61); + + /* Pad out to 112 mod 128 and append length */ + index = sctx->count[0] & 0x7f; + padlen = (index < 112) ? (112 - index) : ((128+112) - index); + + if (!may_use_simd()) { + crypto_sha512_update(desc, padding, padlen); + crypto_sha512_update(desc, (const u8 *)&bits, sizeof(bits)); + } else { + kernel_neon_begin(); + /* We need to fill a whole block for __sha512_neon_update() */ + if (padlen <= 112) { + sctx->count[0] += padlen; + if (sctx->count[0] < padlen) + sctx->count[1]++; + memcpy(sctx->buf + index, padding, padlen); + } else { + __sha512_neon_update(desc, padding, padlen, index); + } + __sha512_neon_update(desc, (const u8 *)&bits, + sizeof(bits), 112); + kernel_neon_end(); + } + + /* Store state in digest */ + for (i = 0; i < 8; i++) + dst[i] = cpu_to_be64(sctx->state[i]); + + /* Wipe context */ + memset(sctx, 0, sizeof(*sctx)); + + return 0; +} + +static int sha512_neon_export(struct shash_desc *desc, void *out) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + + memcpy(out, sctx, sizeof(*sctx)); + + return 0; +} + +static int sha512_neon_import(struct shash_desc *desc, const void *in) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + + memcpy(sctx, in, sizeof(*sctx)); + + return 0; +} + +static int sha384_neon_init(struct shash_desc *desc) +{ + struct sha512_state *sctx = shash_desc_ctx(desc); + + sctx->state[0] = SHA384_H0; + sctx->state[1] = SHA384_H1; + sctx->state[2] = SHA384_H2; + sctx->state[3] = SHA384_H3; + sctx->state[4] = SHA384_H4; + sctx->state[5] = SHA384_H5; + sctx->state[6] = SHA384_H6; + sctx->state[7] = SHA384_H7; + + sctx->count[0] = sctx->count[1] = 0; + + return 0; +} + +static int sha384_neon_final(struct shash_desc *desc, u8 *hash) +{ + u8 D[SHA512_DIGEST_SIZE]; + + sha512_neon_final(desc, D); + + memcpy(hash, D, SHA384_DIGEST_SIZE); + memset(D, 0, SHA512_DIGEST_SIZE); + + return 0; +} + +static struct shash_alg algs[] = { { + .digestsize = SHA512_DIGEST_SIZE, + .init = sha512_neon_init, + .update = sha512_neon_update, + .final = sha512_neon_final, + .export = sha512_neon_export, + .import = sha512_neon_import, + .descsize = sizeof(struct sha512_state), + .statesize = sizeof(struct sha512_state), + .base = { + .cra_name = "sha512", + .cra_driver_name = "sha512-neon", + .cra_priority = 250, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA512_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}, { + .digestsize = SHA384_DIGEST_SIZE, + .init = sha384_neon_init, + .update = sha512_neon_update, + .final = sha384_neon_final, + .export = sha512_neon_export, + .import = sha512_neon_import, + .descsize = sizeof(struct sha512_state), + .statesize = sizeof(struct sha512_state), + .base = { + .cra_name = "sha384", + .cra_driver_name = "sha384-neon", + .cra_priority = 250, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA384_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +} }; + +static int __init sha512_neon_mod_init(void) +{ + if (!cpu_has_neon()) + return -ENODEV; + + return crypto_register_shashes(algs, ARRAY_SIZE(algs)); +} + +static void __exit sha512_neon_mod_fini(void) +{ + crypto_unregister_shashes(algs, ARRAY_SIZE(algs)); +} + +module_init(sha512_neon_mod_init); +module_exit(sha512_neon_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SHA512 Secure Hash Algorithm, NEON accelerated"); + +MODULE_ALIAS("sha512"); +MODULE_ALIAS("sha384"); diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index f5a35760198314e150c752290facc879b3c068e6..70cd84eb7fda0c294c004d83841462bb4df799a5 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -22,6 +22,7 @@ generic-y += poll.h generic-y += preempt.h generic-y += resource.h generic-y += rwsem.h +generic-y += scatterlist.h generic-y += sections.h generic-y += segment.h generic-y += sembuf.h diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 57f0584e8d97dc7095fa6a785be27f6e71e424e0..f67fd3afebdfd3fd46418d80d12dd31ea628936c 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -24,6 +24,8 @@ #include #include #include +#include +#include #define IOMEM(x) (x) @@ -179,10 +181,10 @@ * Get current thread_info. */ .macro get_thread_info, rd - ARM( mov \rd, sp, lsr #13 ) + ARM( mov \rd, sp, lsr #THREAD_SIZE_ORDER + PAGE_SHIFT ) THUMB( mov \rd, sp ) - THUMB( lsr \rd, \rd, #13 ) - mov \rd, \rd, lsl #13 + THUMB( lsr \rd, \rd, #THREAD_SIZE_ORDER + PAGE_SHIFT ) + mov \rd, \rd, lsl #THREAD_SIZE_ORDER + PAGE_SHIFT .endm /* @@ -425,4 +427,25 @@ THUMB( orr \reg , \reg , #PSR_T_BIT ) #endif .endm + .irp c,,eq,ne,cs,cc,mi,pl,vs,vc,hi,ls,ge,lt,gt,le,hs,lo + .macro ret\c, reg +#if __LINUX_ARM_ARCH__ < 6 + mov\c pc, \reg +#else + .ifeqs "\reg", "lr" + bx\c \reg + .else + mov\c pc, \reg + .endif +#endif + .endm + .endr + + .macro ret.w, reg + ret \reg +#ifdef CONFIG_THUMB2_KERNEL + nop +#endif + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/cputype.h b/arch/arm/include/asm/cputype.h index 8c2b7321a4782ad01470d996aaf315d1dc92a38d..963a2515906dce2a2c42e7b924edb6106652497c 100644 --- a/arch/arm/include/asm/cputype.h +++ b/arch/arm/include/asm/cputype.h @@ -62,17 +62,18 @@ #define ARM_CPU_IMP_ARM 0x41 #define ARM_CPU_IMP_INTEL 0x69 -#define ARM_CPU_PART_ARM1136 0xB360 -#define ARM_CPU_PART_ARM1156 0xB560 -#define ARM_CPU_PART_ARM1176 0xB760 -#define ARM_CPU_PART_ARM11MPCORE 0xB020 -#define ARM_CPU_PART_CORTEX_A8 0xC080 -#define ARM_CPU_PART_CORTEX_A9 0xC090 -#define ARM_CPU_PART_CORTEX_A5 0xC050 -#define ARM_CPU_PART_CORTEX_A15 0xC0F0 -#define ARM_CPU_PART_CORTEX_A7 0xC070 -#define ARM_CPU_PART_CORTEX_A12 0xC0D0 -#define ARM_CPU_PART_CORTEX_A17 0xC0E0 +/* ARM implemented processors */ +#define ARM_CPU_PART_ARM1136 0x4100b360 +#define ARM_CPU_PART_ARM1156 0x4100b560 +#define ARM_CPU_PART_ARM1176 0x4100b760 +#define ARM_CPU_PART_ARM11MPCORE 0x4100b020 +#define ARM_CPU_PART_CORTEX_A8 0x4100c080 +#define ARM_CPU_PART_CORTEX_A9 0x4100c090 +#define ARM_CPU_PART_CORTEX_A5 0x4100c050 +#define ARM_CPU_PART_CORTEX_A7 0x4100c070 +#define ARM_CPU_PART_CORTEX_A12 0x4100c0d0 +#define ARM_CPU_PART_CORTEX_A17 0x4100c0e0 +#define ARM_CPU_PART_CORTEX_A15 0x4100c0f0 #define ARM_CPU_XSCALE_ARCH_MASK 0xe000 #define ARM_CPU_XSCALE_ARCH_V1 0x2000 @@ -171,14 +172,24 @@ static inline unsigned int __attribute_const__ read_cpuid_implementor(void) return (read_cpuid_id() & 0xFF000000) >> 24; } -static inline unsigned int __attribute_const__ read_cpuid_part_number(void) +/* + * The CPU part number is meaningless without referring to the CPU + * implementer: implementers are free to define their own part numbers + * which are permitted to clash with other implementer part numbers. + */ +static inline unsigned int __attribute_const__ read_cpuid_part(void) +{ + return read_cpuid_id() & 0xff00fff0; +} + +static inline unsigned int __attribute_const__ __deprecated read_cpuid_part_number(void) { return read_cpuid_id() & 0xFFF0; } static inline unsigned int __attribute_const__ xscale_cpu_arch_version(void) { - return read_cpuid_part_number() & ARM_CPU_XSCALE_ARCH_MASK; + return read_cpuid_id() & ARM_CPU_XSCALE_ARCH_MASK; } static inline unsigned int __attribute_const__ read_cpuid_cachetype(void) diff --git a/arch/arm/include/asm/crypto/sha1.h b/arch/arm/include/asm/crypto/sha1.h new file mode 100644 index 0000000000000000000000000000000000000000..75e6a417416b4510702326075aaf199695a57bab --- /dev/null +++ b/arch/arm/include/asm/crypto/sha1.h @@ -0,0 +1,10 @@ +#ifndef ASM_ARM_CRYPTO_SHA1_H +#define ASM_ARM_CRYPTO_SHA1_H + +#include +#include + +extern int sha1_update_arm(struct shash_desc *desc, const u8 *data, + unsigned int len); + +#endif diff --git a/arch/arm/include/asm/entry-macro-multi.S b/arch/arm/include/asm/entry-macro-multi.S index 88d61815f0c03caceaa94af319687b6dbd6913ce..469a2b30fa279bbc1eb280ddb78b1952389dfc77 100644 --- a/arch/arm/include/asm/entry-macro-multi.S +++ b/arch/arm/include/asm/entry-macro-multi.S @@ -35,5 +35,5 @@ \symbol_name: mov r8, lr arch_irq_handler_default - mov pc, r8 + ret r8 .endm diff --git a/arch/arm/include/asm/glue-proc.h b/arch/arm/include/asm/glue-proc.h index 74a8b84f3cb1d1d35f9de0461483968cc93132bc..74be7c22035afbec6933dc3d853f58e1672c8736 100644 --- a/arch/arm/include/asm/glue-proc.h +++ b/arch/arm/include/asm/glue-proc.h @@ -221,15 +221,6 @@ # endif #endif -#ifdef CONFIG_CPU_V7 -# ifdef CPU_NAME -# undef MULTI_CPU -# define MULTI_CPU -# else -# define CPU_NAME cpu_v7 -# endif -#endif - #ifdef CONFIG_CPU_V7M # ifdef CPU_NAME # undef MULTI_CPU @@ -248,6 +239,15 @@ # endif #endif +#ifdef CONFIG_CPU_V7 +/* + * Cortex-A9 needs a different suspend/resume function, so we need + * multiple CPU support for ARMv7 anyway. + */ +# undef MULTI_CPU +# define MULTI_CPU +#endif + #ifndef MULTI_CPU #define cpu_proc_init __glue(CPU_NAME,_proc_init) #define cpu_proc_fin __glue(CPU_NAME,_proc_fin) diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h index 477e0206e016d1a5075692059fab1d83715ee315..504dcddebfcca8ec45d31b36fc4f9a6232999aa0 100644 --- a/arch/arm/include/asm/gpio.h +++ b/arch/arm/include/asm/gpio.h @@ -5,12 +5,6 @@ #define ARCH_NR_GPIOS CONFIG_ARCH_NR_GPIO #endif -/* not all ARM platforms necessarily support this API ... */ -#ifdef CONFIG_NEED_MACH_GPIO_H -#include -#endif - -#ifndef __ARM_GPIOLIB_COMPLEX /* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */ #include @@ -18,7 +12,6 @@ #define gpio_get_value __gpio_get_value #define gpio_set_value __gpio_set_value #define gpio_cansleep __gpio_cansleep -#endif /* * Provide a default gpio_to_irq() which should satisfy every case. diff --git a/arch/arm/include/asm/kvm_asm.h b/arch/arm/include/asm/kvm_asm.h index 53b3c4a50d5c16fcac649852b399392a11ed0692..3a67bec72d0cddd61d145a11afbddad5b9412a05 100644 --- a/arch/arm/include/asm/kvm_asm.h +++ b/arch/arm/include/asm/kvm_asm.h @@ -61,6 +61,24 @@ #define ARM_EXCEPTION_FIQ 6 #define ARM_EXCEPTION_HVC 7 +/* + * The rr_lo_hi macro swaps a pair of registers depending on + * current endianness. It is used in conjunction with ldrd and strd + * instructions that load/store a 64-bit value from/to memory to/from + * a pair of registers which are used with the mrrc and mcrr instructions. + * If used with the ldrd/strd instructions, the a1 parameter is the first + * source/destination register and the a2 parameter is the second + * source/destination register. Note that the ldrd/strd instructions + * already swap the bytes within the words correctly according to the + * endianness setting, but the order of the registers need to be effectively + * swapped when used with the mrrc/mcrr instructions. + */ +#ifdef CONFIG_CPU_ENDIAN_BE8 +#define rr_lo_hi(a1, a2) a2, a1 +#else +#define rr_lo_hi(a1, a2) a1, a2 +#endif + #ifndef __ASSEMBLY__ struct kvm; struct kvm_vcpu; diff --git a/arch/arm/include/asm/kvm_emulate.h b/arch/arm/include/asm/kvm_emulate.h index 0fa90c962ac831329df43a156c5b0583732099ac..69b746955fca322185cea04301ecef8d2feaabe6 100644 --- a/arch/arm/include/asm/kvm_emulate.h +++ b/arch/arm/include/asm/kvm_emulate.h @@ -185,9 +185,16 @@ static inline unsigned long vcpu_data_guest_to_host(struct kvm_vcpu *vcpu, default: return be32_to_cpu(data); } + } else { + switch (len) { + case 1: + return data & 0xff; + case 2: + return le16_to_cpu(data & 0xffff); + default: + return le32_to_cpu(data); + } } - - return data; /* Leave LE untouched */ } static inline unsigned long vcpu_data_host_to_guest(struct kvm_vcpu *vcpu, @@ -203,9 +210,16 @@ static inline unsigned long vcpu_data_host_to_guest(struct kvm_vcpu *vcpu, default: return cpu_to_be32(data); } + } else { + switch (len) { + case 1: + return data & 0xff; + case 2: + return cpu_to_le16(data & 0xffff); + default: + return cpu_to_le32(data); + } } - - return data; /* Leave LE untouched */ } #endif /* __ARM_KVM_EMULATE_H__ */ diff --git a/arch/arm/include/asm/kvm_host.h b/arch/arm/include/asm/kvm_host.h index 193ceaf01bfd00078fd150e4b80e1edef2324f91..6dfb404f6c462008bcee3aee58a1bb6a129524b2 100644 --- a/arch/arm/include/asm/kvm_host.h +++ b/arch/arm/include/asm/kvm_host.h @@ -225,10 +225,12 @@ static inline int kvm_arch_dev_ioctl_check_extension(long ext) return 0; } +static inline void vgic_arch_setup(const struct vgic_params *vgic) +{ + BUG_ON(vgic->type != VGIC_V2); +} + int kvm_perf_init(void); int kvm_perf_teardown(void); -u64 kvm_arm_timer_get_reg(struct kvm_vcpu *, u64 regid); -int kvm_arm_timer_set_reg(struct kvm_vcpu *, u64 regid, u64 value); - #endif /* __ARM_KVM_HOST_H__ */ diff --git a/arch/arm/include/asm/kvm_mmu.h b/arch/arm/include/asm/kvm_mmu.h index 5c7aa3c1519fc109a5469f1443cb292dcf94804c..5cc0b0f5f72fa269f3240741739b178d6d4fbc70 100644 --- a/arch/arm/include/asm/kvm_mmu.h +++ b/arch/arm/include/asm/kvm_mmu.h @@ -127,6 +127,18 @@ static inline void kvm_set_s2pmd_writable(pmd_t *pmd) (__boundary - 1 < (end) - 1)? __boundary: (end); \ }) +static inline bool kvm_page_empty(void *ptr) +{ + struct page *ptr_page = virt_to_page(ptr); + return page_count(ptr_page) == 1; +} + + +#define kvm_pte_table_empty(ptep) kvm_page_empty(ptep) +#define kvm_pmd_table_empty(pmdp) kvm_page_empty(pmdp) +#define kvm_pud_table_empty(pudp) (0) + + struct kvm; #define kvm_flush_dcache_to_poc(a,l) __cpuc_flush_dcache_area((a), (l)) diff --git a/arch/arm/include/asm/mcpm.h b/arch/arm/include/asm/mcpm.h index 94060adba174718f9b701395cf7ad8cf9d8d2192..57ff7f2a30844ab464361178103df9e8d03a9c53 100644 --- a/arch/arm/include/asm/mcpm.h +++ b/arch/arm/include/asm/mcpm.h @@ -217,6 +217,22 @@ int __mcpm_cluster_state(unsigned int cluster); int __init mcpm_sync_init( void (*power_up_setup)(unsigned int affinity_level)); +/** + * mcpm_loopback - make a run through the MCPM low-level code + * + * @cache_disable: pointer to function performing cache disabling + * + * This exercises the MCPM machinery by soft resetting the CPU and branching + * to the MCPM low-level entry code before returning to the caller. + * The @cache_disable function must do the necessary cache disabling to + * let the regular kernel init code turn it back on as if the CPU was + * hotplugged in. The MCPM state machine is set as if the cluster was + * initialized meaning the power_up_setup callback passed to mcpm_sync_init() + * will be invoked for all affinity levels. This may be useful to initialize + * some resources such as enabling the CCI that requires the cache to be off, or simply for testing purposes. + */ +int __init mcpm_loopback(void (*cache_disable)(void)); + void __init mcpm_smp_set_ops(void); #else diff --git a/arch/arm/include/asm/mcs_spinlock.h b/arch/arm/include/asm/mcs_spinlock.h new file mode 100644 index 0000000000000000000000000000000000000000..f652ad65840a44c4dbd0e5b3bd26d3bab7d09f9d --- /dev/null +++ b/arch/arm/include/asm/mcs_spinlock.h @@ -0,0 +1,23 @@ +#ifndef __ASM_MCS_LOCK_H +#define __ASM_MCS_LOCK_H + +#ifdef CONFIG_SMP +#include + +/* MCS spin-locking. */ +#define arch_mcs_spin_lock_contended(lock) \ +do { \ + /* Ensure prior stores are observed before we enter wfe. */ \ + smp_mb(); \ + while (!(smp_load_acquire(lock))) \ + wfe(); \ +} while (0) \ + +#define arch_mcs_spin_unlock_contended(lock) \ +do { \ + smp_store_release(lock, 1); \ + dsb_sev(); \ +} while (0) + +#endif /* CONFIG_SMP */ +#endif /* __ASM_MCS_LOCK_H */ diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 2b751464d6ff1936bc9b73e2aaeec0a707420aaf..e731018869a7570cfb7836424304db6284993d90 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -91,9 +91,7 @@ * of this define that was meant to. * Fortunately, there is no reference for this in noMMU mode, for now. */ -#ifndef TASK_SIZE -#define TASK_SIZE (CONFIG_DRAM_SIZE) -#endif +#define TASK_SIZE UL(0xffffffff) #ifndef TASK_UNMAPPED_BASE #define TASK_UNMAPPED_BASE UL(0x00000000) @@ -150,13 +148,11 @@ /* * PLAT_PHYS_OFFSET is the offset (from zero) of the start of physical - * memory. This is used for XIP and NoMMU kernels, or by kernels which - * have their own mach/memory.h. Assembly code must always use + * memory. This is used for XIP and NoMMU kernels, and on platforms that don't + * have CONFIG_ARM_PATCH_PHYS_VIRT. Assembly code must always use * PLAT_PHYS_OFFSET and not PHYS_OFFSET. */ -#ifndef PLAT_PHYS_OFFSET #define PLAT_PHYS_OFFSET UL(CONFIG_PHYS_OFFSET) -#endif #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/perf_event.h b/arch/arm/include/asm/perf_event.h index 755877527cf9b963657efcda52a15f04845ef5b8..c3a83691af8eda239f00df0a46b8839044c9e65d 100644 --- a/arch/arm/include/asm/perf_event.h +++ b/arch/arm/include/asm/perf_event.h @@ -12,15 +12,6 @@ #ifndef __ARM_PERF_EVENT_H__ #define __ARM_PERF_EVENT_H__ -/* - * The ARMv7 CPU PMU supports up to 32 event counters. - */ -#define ARMPMU_MAX_HWEVENTS 32 - -#define HW_OP_UNSUPPORTED 0xFFFF -#define C(_x) PERF_COUNT_HW_CACHE_##_x -#define CACHE_OP_UNSUPPORTED 0xFFFF - #ifdef CONFIG_HW_PERF_EVENTS struct pt_regs; extern unsigned long perf_instruction_pointer(struct pt_regs *regs); diff --git a/arch/arm/include/asm/pgtable-3level-hwdef.h b/arch/arm/include/asm/pgtable-3level-hwdef.h index 626989fec4d334ef8c01f707f87de6a25c1d8a8e..9fd61c72a33a1417704881274239e2fd29053cce 100644 --- a/arch/arm/include/asm/pgtable-3level-hwdef.h +++ b/arch/arm/include/asm/pgtable-3level-hwdef.h @@ -43,7 +43,7 @@ #define PMD_SECT_BUFFERABLE (_AT(pmdval_t, 1) << 2) #define PMD_SECT_CACHEABLE (_AT(pmdval_t, 1) << 3) #define PMD_SECT_USER (_AT(pmdval_t, 1) << 6) /* AP[1] */ -#define PMD_SECT_RDONLY (_AT(pmdval_t, 1) << 7) /* AP[2] */ +#define PMD_SECT_AP2 (_AT(pmdval_t, 1) << 7) /* read only */ #define PMD_SECT_S (_AT(pmdval_t, 3) << 8) #define PMD_SECT_AF (_AT(pmdval_t, 1) << 10) #define PMD_SECT_nG (_AT(pmdval_t, 1) << 11) @@ -72,6 +72,7 @@ #define PTE_TABLE_BIT (_AT(pteval_t, 1) << 1) #define PTE_BUFFERABLE (_AT(pteval_t, 1) << 2) /* AttrIndx[0] */ #define PTE_CACHEABLE (_AT(pteval_t, 1) << 3) /* AttrIndx[1] */ +#define PTE_AP2 (_AT(pteval_t, 1) << 7) /* AP[2] */ #define PTE_EXT_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */ #define PTE_EXT_AF (_AT(pteval_t, 1) << 10) /* Access Flag */ #define PTE_EXT_NG (_AT(pteval_t, 1) << 11) /* nG */ diff --git a/arch/arm/include/asm/pgtable-3level.h b/arch/arm/include/asm/pgtable-3level.h index 85c60adc8b60bd04a68c3012b0c22ec7c1bf9bba..06e0bc0f8b00b2c7f9fe9f6dac97c81b00b803bb 100644 --- a/arch/arm/include/asm/pgtable-3level.h +++ b/arch/arm/include/asm/pgtable-3level.h @@ -79,18 +79,19 @@ #define L_PTE_PRESENT (_AT(pteval_t, 3) << 0) /* Present */ #define L_PTE_FILE (_AT(pteval_t, 1) << 2) /* only when !PRESENT */ #define L_PTE_USER (_AT(pteval_t, 1) << 6) /* AP[1] */ -#define L_PTE_RDONLY (_AT(pteval_t, 1) << 7) /* AP[2] */ #define L_PTE_SHARED (_AT(pteval_t, 3) << 8) /* SH[1:0], inner shareable */ #define L_PTE_YOUNG (_AT(pteval_t, 1) << 10) /* AF */ #define L_PTE_XN (_AT(pteval_t, 1) << 54) /* XN */ -#define L_PTE_DIRTY (_AT(pteval_t, 1) << 55) /* unused */ -#define L_PTE_SPECIAL (_AT(pteval_t, 1) << 56) /* unused */ +#define L_PTE_DIRTY (_AT(pteval_t, 1) << 55) +#define L_PTE_SPECIAL (_AT(pteval_t, 1) << 56) #define L_PTE_NONE (_AT(pteval_t, 1) << 57) /* PROT_NONE */ +#define L_PTE_RDONLY (_AT(pteval_t, 1) << 58) /* READ ONLY */ -#define PMD_SECT_VALID (_AT(pmdval_t, 1) << 0) -#define PMD_SECT_DIRTY (_AT(pmdval_t, 1) << 55) -#define PMD_SECT_SPLITTING (_AT(pmdval_t, 1) << 56) -#define PMD_SECT_NONE (_AT(pmdval_t, 1) << 57) +#define L_PMD_SECT_VALID (_AT(pmdval_t, 1) << 0) +#define L_PMD_SECT_DIRTY (_AT(pmdval_t, 1) << 55) +#define L_PMD_SECT_SPLITTING (_AT(pmdval_t, 1) << 56) +#define L_PMD_SECT_NONE (_AT(pmdval_t, 1) << 57) +#define L_PMD_SECT_RDONLY (_AT(pteval_t, 1) << 58) /* * To be used in assembly code with the upper page attributes. @@ -207,27 +208,32 @@ static inline pmd_t *pmd_offset(pud_t *pud, unsigned long addr) #define pte_huge(pte) (pte_val(pte) && !(pte_val(pte) & PTE_TABLE_BIT)) #define pte_mkhuge(pte) (__pte(pte_val(pte) & ~PTE_TABLE_BIT)) -#define pmd_young(pmd) (pmd_val(pmd) & PMD_SECT_AF) +#define pmd_isset(pmd, val) ((u32)(val) == (val) ? pmd_val(pmd) & (val) \ + : !!(pmd_val(pmd) & (val))) +#define pmd_isclear(pmd, val) (!(pmd_val(pmd) & (val))) + +#define pmd_young(pmd) (pmd_isset((pmd), PMD_SECT_AF)) #define __HAVE_ARCH_PMD_WRITE -#define pmd_write(pmd) (!(pmd_val(pmd) & PMD_SECT_RDONLY)) +#define pmd_write(pmd) (pmd_isclear((pmd), L_PMD_SECT_RDONLY)) +#define pmd_dirty(pmd) (pmd_isset((pmd), L_PMD_SECT_DIRTY)) #define pmd_hugewillfault(pmd) (!pmd_young(pmd) || !pmd_write(pmd)) #define pmd_thp_or_huge(pmd) (pmd_huge(pmd) || pmd_trans_huge(pmd)) #ifdef CONFIG_TRANSPARENT_HUGEPAGE -#define pmd_trans_huge(pmd) (pmd_val(pmd) && !(pmd_val(pmd) & PMD_TABLE_BIT)) -#define pmd_trans_splitting(pmd) (pmd_val(pmd) & PMD_SECT_SPLITTING) +#define pmd_trans_huge(pmd) (pmd_val(pmd) && !pmd_table(pmd)) +#define pmd_trans_splitting(pmd) (pmd_isset((pmd), L_PMD_SECT_SPLITTING)) #endif #define PMD_BIT_FUNC(fn,op) \ static inline pmd_t pmd_##fn(pmd_t pmd) { pmd_val(pmd) op; return pmd; } -PMD_BIT_FUNC(wrprotect, |= PMD_SECT_RDONLY); +PMD_BIT_FUNC(wrprotect, |= L_PMD_SECT_RDONLY); PMD_BIT_FUNC(mkold, &= ~PMD_SECT_AF); -PMD_BIT_FUNC(mksplitting, |= PMD_SECT_SPLITTING); -PMD_BIT_FUNC(mkwrite, &= ~PMD_SECT_RDONLY); -PMD_BIT_FUNC(mkdirty, |= PMD_SECT_DIRTY); +PMD_BIT_FUNC(mksplitting, |= L_PMD_SECT_SPLITTING); +PMD_BIT_FUNC(mkwrite, &= ~L_PMD_SECT_RDONLY); +PMD_BIT_FUNC(mkdirty, |= L_PMD_SECT_DIRTY); PMD_BIT_FUNC(mkyoung, |= PMD_SECT_AF); #define pmd_mkhuge(pmd) (__pmd(pmd_val(pmd) & ~PMD_TABLE_BIT)) @@ -241,8 +247,8 @@ PMD_BIT_FUNC(mkyoung, |= PMD_SECT_AF); static inline pmd_t pmd_modify(pmd_t pmd, pgprot_t newprot) { - const pmdval_t mask = PMD_SECT_USER | PMD_SECT_XN | PMD_SECT_RDONLY | - PMD_SECT_VALID | PMD_SECT_NONE; + const pmdval_t mask = PMD_SECT_USER | PMD_SECT_XN | L_PMD_SECT_RDONLY | + L_PMD_SECT_VALID | L_PMD_SECT_NONE; pmd_val(pmd) = (pmd_val(pmd) & ~mask) | (pgprot_val(newprot) & mask); return pmd; } @@ -253,8 +259,13 @@ static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr, BUG_ON(addr >= TASK_SIZE); /* create a faulting entry if PROT_NONE protected */ - if (pmd_val(pmd) & PMD_SECT_NONE) - pmd_val(pmd) &= ~PMD_SECT_VALID; + if (pmd_val(pmd) & L_PMD_SECT_NONE) + pmd_val(pmd) &= ~L_PMD_SECT_VALID; + + if (pmd_write(pmd) && pmd_dirty(pmd)) + pmd_val(pmd) &= ~PMD_SECT_AP2; + else + pmd_val(pmd) |= PMD_SECT_AP2; *pmdp = __pmd(pmd_val(pmd) | PMD_SECT_nG); flush_pmd_entry(pmdp); diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 5478e5d6ad89f4f9b4825623a3cd38a5a8bae91e..01baef07cd0ca64a16f8b84c52c56a88c7ef6989 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -214,18 +214,22 @@ static inline pte_t *pmd_page_vaddr(pmd_t pmd) #define pte_clear(mm,addr,ptep) set_pte_ext(ptep, __pte(0), 0) +#define pte_isset(pte, val) ((u32)(val) == (val) ? pte_val(pte) & (val) \ + : !!(pte_val(pte) & (val))) +#define pte_isclear(pte, val) (!(pte_val(pte) & (val))) + #define pte_none(pte) (!pte_val(pte)) -#define pte_present(pte) (pte_val(pte) & L_PTE_PRESENT) -#define pte_valid(pte) (pte_val(pte) & L_PTE_VALID) +#define pte_present(pte) (pte_isset((pte), L_PTE_PRESENT)) +#define pte_valid(pte) (pte_isset((pte), L_PTE_VALID)) #define pte_accessible(mm, pte) (mm_tlb_flush_pending(mm) ? pte_present(pte) : pte_valid(pte)) -#define pte_write(pte) (!(pte_val(pte) & L_PTE_RDONLY)) -#define pte_dirty(pte) (pte_val(pte) & L_PTE_DIRTY) -#define pte_young(pte) (pte_val(pte) & L_PTE_YOUNG) -#define pte_exec(pte) (!(pte_val(pte) & L_PTE_XN)) +#define pte_write(pte) (pte_isclear((pte), L_PTE_RDONLY)) +#define pte_dirty(pte) (pte_isset((pte), L_PTE_DIRTY)) +#define pte_young(pte) (pte_isset((pte), L_PTE_YOUNG)) +#define pte_exec(pte) (pte_isclear((pte), L_PTE_XN)) #define pte_special(pte) (0) #define pte_valid_user(pte) \ - (pte_valid(pte) && (pte_val(pte) & L_PTE_USER) && pte_young(pte)) + (pte_valid(pte) && pte_isset((pte), L_PTE_USER) && pte_young(pte)) #if __LINUX_ARM_ARCH__ < 6 static inline void __sync_icache_dcache(pte_t pteval) diff --git a/arch/arm/include/asm/pmu.h b/arch/arm/include/asm/pmu.h index ae1919be8f988a68d109963f087912128d773dbc..0b648c541293b9ac7387e14fbbe61f6ad87ff789 100644 --- a/arch/arm/include/asm/pmu.h +++ b/arch/arm/include/asm/pmu.h @@ -42,6 +42,25 @@ struct arm_pmu_platdata { #ifdef CONFIG_HW_PERF_EVENTS +/* + * The ARMv7 CPU PMU supports up to 32 event counters. + */ +#define ARMPMU_MAX_HWEVENTS 32 + +#define HW_OP_UNSUPPORTED 0xFFFF +#define C(_x) PERF_COUNT_HW_CACHE_##_x +#define CACHE_OP_UNSUPPORTED 0xFFFF + +#define PERF_MAP_ALL_UNSUPPORTED \ + [0 ... PERF_COUNT_HW_MAX - 1] = HW_OP_UNSUPPORTED + +#define PERF_CACHE_MAP_ALL_UNSUPPORTED \ +[0 ... C(MAX) - 1] = { \ + [0 ... C(OP_MAX) - 1] = { \ + [0 ... C(RESULT_MAX) - 1] = CACHE_OP_UNSUPPORTED, \ + }, \ +} + /* The events for a given PMU register set. */ struct pmu_hw_events { /* diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index c877654fe3bf680f51d12bd9f2c7b3154454742b..601264d983fa4034db151abdb165b3920f9cc109 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -84,6 +84,12 @@ static inline long regs_return_value(struct pt_regs *regs) #define instruction_pointer(regs) (regs)->ARM_pc +#ifdef CONFIG_THUMB2_KERNEL +#define frame_pointer(regs) (regs)->ARM_r7 +#else +#define frame_pointer(regs) (regs)->ARM_fp +#endif + static inline void instruction_pointer_set(struct pt_regs *regs, unsigned long val) { diff --git a/arch/arm/include/asm/scatterlist.h b/arch/arm/include/asm/scatterlist.h deleted file mode 100644 index cefdb8f898a15fe48482b1d47636933a434ca222..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/scatterlist.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef _ASMARM_SCATTERLIST_H -#define _ASMARM_SCATTERLIST_H - -#ifdef CONFIG_ARM_HAS_SG_CHAIN -#define ARCH_HAS_SG_CHAIN -#endif - -#include -#include -#include - -#endif /* _ASMARM_SCATTERLIST_H */ diff --git a/arch/arm/include/asm/smp_scu.h b/arch/arm/include/asm/smp_scu.h index 0393fbab8dd5f1a572d35ccc0531af5449a398c5..bfe163c40024de7d6ccc81097451cfc409cc42c8 100644 --- a/arch/arm/include/asm/smp_scu.h +++ b/arch/arm/include/asm/smp_scu.h @@ -11,7 +11,7 @@ static inline bool scu_a9_has_base(void) { - return read_cpuid_part_number() == ARM_CPU_PART_CORTEX_A9; + return read_cpuid_part() == ARM_CPU_PART_CORTEX_A9; } static inline unsigned long scu_a9_get_base(void) diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h index 4d0a16441b29aac162b23b8af19de2e637896a83..7722201ead197623d83df01f1c5ff5119527cd84 100644 --- a/arch/arm/include/asm/stacktrace.h +++ b/arch/arm/include/asm/stacktrace.h @@ -1,13 +1,28 @@ #ifndef __ASM_STACKTRACE_H #define __ASM_STACKTRACE_H +#include + struct stackframe { + /* + * FP member should hold R7 when CONFIG_THUMB2_KERNEL is enabled + * and R11 otherwise. + */ unsigned long fp; unsigned long sp; unsigned long lr; unsigned long pc; }; +static __always_inline +void arm_get_current_stackframe(struct pt_regs *regs, struct stackframe *frame) +{ + frame->fp = frame_pointer(regs); + frame->sp = regs->ARM_sp; + frame->lr = regs->ARM_lr; + frame->pc = regs->ARM_pc; +} + extern int unwind_frame(struct stackframe *frame); extern void walk_stackframe(struct stackframe *frame, int (*fn)(struct stackframe *, void *), void *data); diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index e4e4208a913037303e24a4c35bcb794b773e21fc..fc44d3761f9e7d36eb8ff4911ff0120a63e7584f 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -14,9 +14,10 @@ #include #include +#include #define THREAD_SIZE_ORDER 1 -#define THREAD_SIZE 8192 +#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER) #define THREAD_START_SP (THREAD_SIZE - 8) #ifndef __ASSEMBLY__ diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 75d95799b6e6df7238dd425dc66da51ddb006633..a4cd7af475e90de4bb57398cfd569e06f15a1135 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -107,6 +107,8 @@ static inline void set_fs(mm_segment_t fs) extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); +extern int __get_user_lo8(void *); +extern int __get_user_8(void *); #define __GUP_CLOBBER_1 "lr", "cc" #ifdef CONFIG_CPU_USE_DOMAINS @@ -115,6 +117,8 @@ extern int __get_user_4(void *); #define __GUP_CLOBBER_2 "lr", "cc" #endif #define __GUP_CLOBBER_4 "lr", "cc" +#define __GUP_CLOBBER_lo8 "lr", "cc" +#define __GUP_CLOBBER_8 "lr", "cc" #define __get_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ @@ -125,11 +129,19 @@ extern int __get_user_4(void *); : "0" (__p), "r" (__l) \ : __GUP_CLOBBER_##__s) +/* narrowing a double-word get into a single 32bit word register: */ +#ifdef __ARMEB__ +#define __get_user_xb(__r2, __p, __e, __l, __s) \ + __get_user_x(__r2, __p, __e, __l, lo8) +#else +#define __get_user_xb __get_user_x +#endif + #define __get_user_check(x,p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ - register unsigned long __r2 asm("r2"); \ + register typeof(x) __r2 asm("r2"); \ register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ @@ -142,6 +154,12 @@ extern int __get_user_4(void *); case 4: \ __get_user_x(__r2, __p, __e, __l, 4); \ break; \ + case 8: \ + if (sizeof((x)) < 8) \ + __get_user_xb(__r2, __p, __e, __l, 4); \ + else \ + __get_user_x(__r2, __p, __e, __l, 8); \ + break; \ default: __e = __get_user_bad(); break; \ } \ x = (typeof(*(p))) __r2; \ @@ -224,7 +242,7 @@ static inline void set_fs(mm_segment_t fs) #define access_ok(type,addr,size) (__range_ok(addr,size) == 0) #define user_addr_max() \ - (segment_eq(get_fs(), USER_DS) ? TASK_SIZE : ~0UL) + (segment_eq(get_fs(), KERNEL_DS) ? ~0UL : get_fs()) /* * The "__xxx" versions of the user access functions do not verify the diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 43876245fc5707780115c36d67d1843fce0cf6bf..32640c431a087f682ff461f971ca0c7c960c737e 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -15,7 +15,17 @@ #include -#define __NR_syscalls (384) +/* + * This may need to be greater than __NR_last_syscall+1 in order to + * account for the padding in the syscall table + */ +#define __NR_syscalls (388) + +/* + * *NOTE*: This is a ghost syscall private to the kernel. Only the + * __kuser_cmpxchg code in entry-armv.S should be aware of its + * existence. Don't ever use this from user code. + */ #define __ARM_NR_cmpxchg (__ARM_NR_BASE+0x00fff0) #define __ARCH_WANT_STAT64 diff --git a/arch/arm/include/debug/clps711x.S b/arch/arm/include/debug/clps711x.S new file mode 100644 index 0000000000000000000000000000000000000000..abe2254366866b71a8856d4ef26b98f427e5c08c --- /dev/null +++ b/arch/arm/include/debug/clps711x.S @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2014 Alexander Shiyan + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef CONFIG_DEBUG_CLPS711X_UART2 +#define CLPS711X_UART_PADDR (0x80000000 + 0x0000) +#define CLPS711X_UART_VADDR (0xfeff0000 + 0x0000) +#else +#define CLPS711X_UART_PADDR (0x80000000 + 0x1000) +#define CLPS711X_UART_VADDR (0xfeff0000 + 0x1000) +#endif + +#define SYSFLG (0x0140) +#define SYSFLG_UBUSY (1 << 11) +#define UARTDR (0x0480) + + .macro addruart, rp, rv, tmp + ldr \rv, =CLPS711X_UART_VADDR + ldr \rp, =CLPS711X_UART_PADDR + .endm + + .macro waituart,rd,rx + .endm + + .macro senduart,rd,rx + str \rd, [\rx, #UARTDR] + .endm + + .macro busyuart,rd,rx +1001: ldr \rd, [\rx, #SYSFLG] + tst \rd, #SYSFLG_UBUSY + bne 1001b + .endm diff --git a/arch/arm/mach-s5pv210/include/mach/debug-macro.S b/arch/arm/include/debug/s5pv210.S similarity index 62% rename from arch/arm/mach-s5pv210/include/mach/debug-macro.S rename to arch/arm/include/debug/s5pv210.S index 30b511a580aabae0c11de499cb8e1713ae07c656..4f1a73e2c1a105d18ff84c14e4262364adc5d8cc 100644 --- a/arch/arm/mach-s5pv210/include/mach/debug-macro.S +++ b/arch/arm/include/debug/s5pv210.S @@ -1,9 +1,6 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/debug-macro.S - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Based on arch/arm/mach-s3c6400/include/mach/debug-macro.S +/* + * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -12,8 +9,9 @@ /* pull in the relevant register and map files. */ -#include -#include +#define S3C_ADDR_BASE 0xF6000000 +#define S3C_VA_UART S3C_ADDR_BASE + 0x01000000 +#define S5PV210_PA_UART 0xe2900000 /* note, for the boot process to work we have to keep the UART * virtual address aligned to an 1MiB boundary for the L1 @@ -22,8 +20,8 @@ */ .macro addruart, rp, rv, tmp - ldr \rp, = S3C_PA_UART - ldr \rv, = S3C_VA_UART + ldr \rp, =S5PV210_PA_UART + ldr \rv, =S3C_VA_UART #if CONFIG_DEBUG_S3C_UART != 0 add \rp, \rp, #(0x400 * CONFIG_DEBUG_S3C_UART) add \rv, \rv, #(0x400 * CONFIG_DEBUG_S3C_UART) @@ -33,9 +31,4 @@ #define fifo_full fifo_full_s5pv210 #define fifo_level fifo_level_s5pv210 -/* include the reset of the code which will do the work, we're only - * compiling for a single cpu processor type so the default of s3c2440 - * will be fine with us. - */ - #include diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h index ba94446c72d9127633de59545a3691390ecdfc5d..3aaa75cae90c912737efbe9ed834d437d0fcaf01 100644 --- a/arch/arm/include/uapi/asm/unistd.h +++ b/arch/arm/include/uapi/asm/unistd.h @@ -409,11 +409,9 @@ #define __NR_sched_setattr (__NR_SYSCALL_BASE+380) #define __NR_sched_getattr (__NR_SYSCALL_BASE+381) #define __NR_renameat2 (__NR_SYSCALL_BASE+382) - -/* - * This may need to be greater than __NR_last_syscall+1 in order to - * account for the padding in the syscall table - */ +#define __NR_seccomp (__NR_SYSCALL_BASE+383) +#define __NR_getrandom (__NR_SYSCALL_BASE+384) +#define __NR_memfd_create (__NR_SYSCALL_BASE+385) /* * The following SWIs are ARM private. @@ -425,12 +423,6 @@ #define __ARM_NR_usr32 (__ARM_NR_BASE+4) #define __ARM_NR_set_tls (__ARM_NR_BASE+5) -/* - * *NOTE*: This is a ghost syscall private to the kernel. Only the - * __kuser_cmpxchg code in entry-armv.S should be aware of its - * existence. Don't ever use this from user code. - */ - /* * The following syscalls are obsolete and no longer available for EABI. */ diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 85598b5d1efdd6343a81fc3b4fa073b174de723c..713e807621d2cf6a785660d40fec9367866eedcd 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -182,13 +182,13 @@ int main(void) DEFINE(VCPU_HYP_PC, offsetof(struct kvm_vcpu, arch.fault.hyp_pc)); #ifdef CONFIG_KVM_ARM_VGIC DEFINE(VCPU_VGIC_CPU, offsetof(struct kvm_vcpu, arch.vgic_cpu)); - DEFINE(VGIC_CPU_HCR, offsetof(struct vgic_cpu, vgic_hcr)); - DEFINE(VGIC_CPU_VMCR, offsetof(struct vgic_cpu, vgic_vmcr)); - DEFINE(VGIC_CPU_MISR, offsetof(struct vgic_cpu, vgic_misr)); - DEFINE(VGIC_CPU_EISR, offsetof(struct vgic_cpu, vgic_eisr)); - DEFINE(VGIC_CPU_ELRSR, offsetof(struct vgic_cpu, vgic_elrsr)); - DEFINE(VGIC_CPU_APR, offsetof(struct vgic_cpu, vgic_apr)); - DEFINE(VGIC_CPU_LR, offsetof(struct vgic_cpu, vgic_lr)); + DEFINE(VGIC_V2_CPU_HCR, offsetof(struct vgic_cpu, vgic_v2.vgic_hcr)); + DEFINE(VGIC_V2_CPU_VMCR, offsetof(struct vgic_cpu, vgic_v2.vgic_vmcr)); + DEFINE(VGIC_V2_CPU_MISR, offsetof(struct vgic_cpu, vgic_v2.vgic_misr)); + DEFINE(VGIC_V2_CPU_EISR, offsetof(struct vgic_cpu, vgic_v2.vgic_eisr)); + DEFINE(VGIC_V2_CPU_ELRSR, offsetof(struct vgic_cpu, vgic_v2.vgic_elrsr)); + DEFINE(VGIC_V2_CPU_APR, offsetof(struct vgic_cpu, vgic_v2.vgic_apr)); + DEFINE(VGIC_V2_CPU_LR, offsetof(struct vgic_cpu, vgic_v2.vgic_lr)); DEFINE(VGIC_CPU_NR_LR, offsetof(struct vgic_cpu, nr_lr)); #ifdef CONFIG_KVM_ARM_TIMER DEFINE(VCPU_TIMER_CNTV_CTL, offsetof(struct kvm_vcpu, arch.timer_cpu.cntv_ctl)); diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 8f51bdcdacbbf6675933f38fb595adbdc825f4c2..9f899d8fdccabb4751bddf48da8f522a17905c75 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -392,6 +392,9 @@ /* 380 */ CALL(sys_sched_setattr) CALL(sys_sched_getattr) CALL(sys_renameat2) + CALL(sys_seccomp) + CALL(sys_getrandom) +/* 385 */ CALL(sys_memfd_create) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/debug.S b/arch/arm/kernel/debug.S index 14f7c3b14632e22c02632faeaca9f07adcbc232f..78c91b5f97d4943e896b4d566f71d491f9e17b22 100644 --- a/arch/arm/kernel/debug.S +++ b/arch/arm/kernel/debug.S @@ -90,7 +90,7 @@ ENTRY(printascii) ldrneb r1, [r0], #1 teqne r1, #0 bne 1b - mov pc, lr + ret lr ENDPROC(printascii) ENTRY(printch) @@ -105,7 +105,7 @@ ENTRY(debug_ll_addr) addruart r2, r3, ip str r2, [r0] str r3, [r1] - mov pc, lr + ret lr ENDPROC(debug_ll_addr) #endif @@ -116,7 +116,7 @@ ENTRY(printascii) mov r0, #0x04 @ SYS_WRITE0 ARM( svc #0x123456 ) THUMB( svc #0xab ) - mov pc, lr + ret lr ENDPROC(printascii) ENTRY(printch) @@ -125,14 +125,14 @@ ENTRY(printch) mov r0, #0x03 @ SYS_WRITEC ARM( svc #0x123456 ) THUMB( svc #0xab ) - mov pc, lr + ret lr ENDPROC(printch) ENTRY(debug_ll_addr) mov r2, #0 str r2, [r0] str r2, [r1] - mov pc, lr + ret lr ENDPROC(debug_ll_addr) #endif diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S index 52a949a8077d3329fc674cbbda7645673e484371..36276cdccfbc71e9e69de18fe21a00ac25ddbd07 100644 --- a/arch/arm/kernel/entry-armv.S +++ b/arch/arm/kernel/entry-armv.S @@ -224,7 +224,7 @@ svc_preempt: 1: bl preempt_schedule_irq @ irq en/disable is done inside ldr r0, [tsk, #TI_FLAGS] @ get new tasks TI_FLAGS tst r0, #_TIF_NEED_RESCHED - moveq pc, r8 @ go again + reteq r8 @ go again b 1b #endif @@ -490,7 +490,7 @@ ENDPROC(__und_usr) .pushsection .fixup, "ax" .align 2 4: str r4, [sp, #S_PC] @ retry current instruction - mov pc, r9 + ret r9 .popsection .pushsection __ex_table,"a" .long 1b, 4b @@ -552,7 +552,7 @@ call_fpe: #endif tst r0, #0x08000000 @ only CDP/CPRT/LDC/STC have bit 27 tstne r0, #0x04000000 @ bit 26 set on both ARM and Thumb-2 - moveq pc, lr + reteq lr and r8, r0, #0x00000f00 @ mask out CP number THUMB( lsr r8, r8, #8 ) mov r7, #1 @@ -571,33 +571,33 @@ call_fpe: THUMB( add pc, r8 ) nop - movw_pc lr @ CP#0 + ret.w lr @ CP#0 W(b) do_fpe @ CP#1 (FPE) W(b) do_fpe @ CP#2 (FPE) - movw_pc lr @ CP#3 + ret.w lr @ CP#3 #ifdef CONFIG_CRUNCH b crunch_task_enable @ CP#4 (MaverickCrunch) b crunch_task_enable @ CP#5 (MaverickCrunch) b crunch_task_enable @ CP#6 (MaverickCrunch) #else - movw_pc lr @ CP#4 - movw_pc lr @ CP#5 - movw_pc lr @ CP#6 + ret.w lr @ CP#4 + ret.w lr @ CP#5 + ret.w lr @ CP#6 #endif - movw_pc lr @ CP#7 - movw_pc lr @ CP#8 - movw_pc lr @ CP#9 + ret.w lr @ CP#7 + ret.w lr @ CP#8 + ret.w lr @ CP#9 #ifdef CONFIG_VFP W(b) do_vfp @ CP#10 (VFP) W(b) do_vfp @ CP#11 (VFP) #else - movw_pc lr @ CP#10 (VFP) - movw_pc lr @ CP#11 (VFP) + ret.w lr @ CP#10 (VFP) + ret.w lr @ CP#11 (VFP) #endif - movw_pc lr @ CP#12 - movw_pc lr @ CP#13 - movw_pc lr @ CP#14 (Debug) - movw_pc lr @ CP#15 (Control) + ret.w lr @ CP#12 + ret.w lr @ CP#13 + ret.w lr @ CP#14 (Debug) + ret.w lr @ CP#15 (Control) #ifdef NEED_CPU_ARCHITECTURE .align 2 @@ -649,7 +649,7 @@ ENTRY(fp_enter) .popsection ENTRY(no_fp) - mov pc, lr + ret lr ENDPROC(no_fp) __und_usr_fault_32: @@ -745,7 +745,7 @@ ENDPROC(__switch_to) #ifdef CONFIG_ARM_THUMB bx \reg #else - mov pc, \reg + ret \reg #endif .endm @@ -837,7 +837,7 @@ kuser_cmpxchg64_fixup: #if __LINUX_ARM_ARCH__ < 6 bcc kuser_cmpxchg32_fixup #endif - mov pc, lr + ret lr .previous #else @@ -905,7 +905,7 @@ kuser_cmpxchg32_fixup: subs r8, r4, r7 rsbcss r8, r8, #(2b - 1b) strcs r7, [sp, #S_PC] - mov pc, lr + ret lr .previous #else diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 7139d4a7dea7d5ad3628084f8732a08a5a9bfeb4..e52fe5a2d8439e36dc2e75bc3f5eb1a6df5ec752 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -8,6 +8,7 @@ * published by the Free Software Foundation. */ +#include #include #include #include @@ -88,7 +89,7 @@ ENTRY(ret_from_fork) cmp r5, #0 movne r0, r4 adrne lr, BSYM(1f) - movne pc, r5 + retne r5 1: get_thread_info tsk b ret_slow_syscall ENDPROC(ret_from_fork) @@ -290,7 +291,7 @@ ENDPROC(ftrace_graph_caller_old) .macro mcount_exit ldmia sp!, {r0-r3, ip, lr} - mov pc, ip + ret ip .endm ENTRY(__gnu_mcount_nc) @@ -298,7 +299,7 @@ UNWIND(.fnstart) #ifdef CONFIG_DYNAMIC_FTRACE mov ip, lr ldmia sp!, {lr} - mov pc, ip + ret ip #else __mcount #endif @@ -333,12 +334,12 @@ return_to_handler: bl ftrace_return_to_handler mov lr, r0 @ r0 has real ret addr ldmia sp!, {r0-r3} - mov pc, lr + ret lr #endif ENTRY(ftrace_stub) .Lftrace_stub: - mov pc, lr + ret lr ENDPROC(ftrace_stub) #endif /* CONFIG_FUNCTION_TRACER */ @@ -561,7 +562,7 @@ sys_mmap2: streq r5, [sp, #4] beq sys_mmap_pgoff mov r0, #-EINVAL - mov pc, lr + ret lr #else str r5, [sp, #4] b sys_mmap_pgoff diff --git a/arch/arm/kernel/entry-header.S b/arch/arm/kernel/entry-header.S index 5d702f8900b106bceaf6f006b5b186103a0bf269..8db307d0954bb03ee95550471dcc0e6f86ae560f 100644 --- a/arch/arm/kernel/entry-header.S +++ b/arch/arm/kernel/entry-header.S @@ -240,12 +240,6 @@ movs pc, lr @ return & move spsr_svc into cpsr .endm - @ - @ 32-bit wide "mov pc, reg" - @ - .macro movw_pc, reg - mov pc, \reg - .endm #else /* CONFIG_THUMB2_KERNEL */ .macro svc_exit, rpsr, irq = 0 .if \irq != 0 @@ -304,14 +298,6 @@ movs pc, lr @ return & move spsr_svc into cpsr .endm #endif /* ifdef CONFIG_CPU_V7M / else */ - - @ - @ 32-bit wide "mov pc, reg" - @ - .macro movw_pc, reg - mov pc, \reg - nop - .endm #endif /* !CONFIG_THUMB2_KERNEL */ /* diff --git a/arch/arm/kernel/fiqasm.S b/arch/arm/kernel/fiqasm.S index 207f9d6520103232ac521ba38031bcbde7f18b0a..8dd26e1a9bd69051a1548d99c157cad2e65ba81b 100644 --- a/arch/arm/kernel/fiqasm.S +++ b/arch/arm/kernel/fiqasm.S @@ -32,7 +32,7 @@ ENTRY(__set_fiq_regs) ldr lr, [r0] msr cpsr_c, r1 @ return to SVC mode mov r0, r0 @ avoid hazard prior to ARMv4 - mov pc, lr + ret lr ENDPROC(__set_fiq_regs) ENTRY(__get_fiq_regs) @@ -45,5 +45,5 @@ ENTRY(__get_fiq_regs) str lr, [r0] msr cpsr_c, r1 @ return to SVC mode mov r0, r0 @ avoid hazard prior to ARMv4 - mov pc, lr + ret lr ENDPROC(__get_fiq_regs) diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S index 572a38335c9627a81307c4a88f7ab0981332af0f..8733012d231f32d5a370e2666885b0813dff097b 100644 --- a/arch/arm/kernel/head-common.S +++ b/arch/arm/kernel/head-common.S @@ -10,6 +10,7 @@ * published by the Free Software Foundation. * */ +#include #define ATAG_CORE 0x54410001 #define ATAG_CORE_SIZE ((2*4 + 3*4) >> 2) @@ -61,10 +62,10 @@ __vet_atags: cmp r5, r6 bne 1f -2: mov pc, lr @ atag/dtb pointer is ok +2: ret lr @ atag/dtb pointer is ok 1: mov r2, #0 - mov pc, lr + ret lr ENDPROC(__vet_atags) /* @@ -162,7 +163,7 @@ __lookup_processor_type: cmp r5, r6 blo 1b mov r5, #0 @ unknown processor -2: mov pc, lr +2: ret lr ENDPROC(__lookup_processor_type) /* diff --git a/arch/arm/kernel/head-nommu.S b/arch/arm/kernel/head-nommu.S index 716249cc2ee18c178643e7e6c4a0cd0eb6a48c00..cc176b67c13487b080bf7d1dc430314496a8b9b1 100644 --- a/arch/arm/kernel/head-nommu.S +++ b/arch/arm/kernel/head-nommu.S @@ -82,7 +82,7 @@ ENTRY(stext) adr lr, BSYM(1f) @ return (PIC) address ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( mov pc, r12 ) + THUMB( ret r12 ) 1: b __after_proc_init ENDPROC(stext) @@ -119,7 +119,7 @@ ENTRY(secondary_startup) mov r13, r12 @ __secondary_switched address ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( mov pc, r12 ) + THUMB( ret r12 ) ENDPROC(secondary_startup) ENTRY(__secondary_switched) @@ -164,7 +164,7 @@ __after_proc_init: #endif mcr p15, 0, r0, c1, c0, 0 @ write control reg #endif /* CONFIG_CPU_CP15 */ - mov pc, r13 + ret r13 ENDPROC(__after_proc_init) .ltorg @@ -254,7 +254,7 @@ ENTRY(__setup_mpu) orr r0, r0, #CR_M @ Set SCTRL.M (MPU on) mcr p15, 0, r0, c1, c0, 0 @ Enable MPU isb - mov pc,lr + ret lr ENDPROC(__setup_mpu) #endif #include "head-common.S" diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 2c35f0ff2fdc82a5a5cfa66ab0d3c5e798d50676..664eee8c4a26ce5998e72a3b1e70ffe8bfa2d8f3 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -140,7 +140,7 @@ ENTRY(stext) mov r8, r4 @ set TTBR1 to swapper_pg_dir ARM( add pc, r10, #PROCINFO_INITFUNC ) THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( mov pc, r12 ) + THUMB( ret r12 ) 1: b __enable_mmu ENDPROC(stext) .ltorg @@ -335,7 +335,7 @@ __create_page_tables: sub r4, r4, #0x1000 @ point to the PGD table mov r4, r4, lsr #ARCH_PGD_SHIFT #endif - mov pc, lr + ret lr ENDPROC(__create_page_tables) .ltorg .align @@ -383,7 +383,7 @@ ENTRY(secondary_startup) ARM( add pc, r10, #PROCINFO_INITFUNC ) @ initialise processor @ (return control reg) THUMB( add r12, r10, #PROCINFO_INITFUNC ) - THUMB( mov pc, r12 ) + THUMB( ret r12 ) ENDPROC(secondary_startup) /* @@ -468,7 +468,7 @@ ENTRY(__turn_mmu_on) instr_sync mov r3, r3 mov r3, r13 - mov pc, r3 + ret r3 __turn_mmu_on_end: ENDPROC(__turn_mmu_on) .popsection @@ -487,7 +487,7 @@ __fixup_smp: orr r4, r4, #0x0000b000 orr r4, r4, #0x00000020 @ val 0x4100b020 teq r3, r4 @ ARM 11MPCore? - moveq pc, lr @ yes, assume SMP + reteq lr @ yes, assume SMP mrc p15, 0, r0, c0, c0, 5 @ read MPIDR and r0, r0, #0xc0000000 @ multiprocessing extensions and @@ -500,7 +500,7 @@ __fixup_smp: orr r4, r4, #0x0000c000 orr r4, r4, #0x00000090 teq r3, r4 @ Check for ARM Cortex-A9 - movne pc, lr @ Not ARM Cortex-A9, + retne lr @ Not ARM Cortex-A9, @ If a future SoC *does* use 0x0 as the PERIPH_BASE, then the @ below address check will need to be #ifdef'd or equivalent @@ -512,7 +512,7 @@ __fixup_smp: ARM_BE8(rev r0, r0) @ byteswap if big endian and r0, r0, #0x3 @ number of CPUs teq r0, #0x0 @ is 1? - movne pc, lr + retne lr __fixup_smp_on_up: adr r0, 1f @@ -539,7 +539,7 @@ smp_on_up: .text __do_fixup_smp_on_up: cmp r4, r5 - movhs pc, lr + reths lr ldmia r4!, {r0, r6} ARM( str r6, [r0, r3] ) THUMB( add r0, r0, r3 ) @@ -672,7 +672,7 @@ ARM_BE8(rev16 ip, ip) 2: cmp r4, r5 ldrcc r7, [r4], #4 @ use branch for delay slot bcc 1b - mov pc, lr + ret lr #endif ENDPROC(__fixup_a_pv_table) diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S index 797b1a6a4906da0f8ca3f942186ac0e033250ce6..2a55373f49bfb621987ad2a548271fe51d7923b5 100644 --- a/arch/arm/kernel/hyp-stub.S +++ b/arch/arm/kernel/hyp-stub.S @@ -99,7 +99,7 @@ ENTRY(__hyp_stub_install_secondary) * immediately. */ compare_cpu_mode_with_primary r4, r5, r6, r7 - movne pc, lr + retne lr /* * Once we have given up on one CPU, we do not try to install the @@ -111,7 +111,7 @@ ENTRY(__hyp_stub_install_secondary) */ cmp r4, #HYP_MODE - movne pc, lr @ give up if the CPU is not in HYP mode + retne lr @ give up if the CPU is not in HYP mode /* * Configure HSCTLR to set correct exception endianness/instruction set @@ -134,9 +134,7 @@ ENTRY(__hyp_stub_install_secondary) mcr p15, 4, r7, c1, c1, 3 @ HSTR THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE -#ifdef CONFIG_CPU_BIG_ENDIAN - orr r7, #(1 << 9) @ HSCTLR.EE -#endif +ARM_BE8(orr r7, r7, #(1 << 25)) @ HSCTLR.EE mcr p15, 4, r7, c1, c0, 0 @ HSCTLR mrc p15, 4, r7, c1, c1, 1 @ HDCR @@ -201,7 +199,7 @@ ENDPROC(__hyp_get_vectors) @ fall through ENTRY(__hyp_set_vectors) __HVC(0) - mov pc, lr + ret lr ENDPROC(__hyp_set_vectors) #ifndef ZIMAGE diff --git a/arch/arm/kernel/iwmmxt.S b/arch/arm/kernel/iwmmxt.S index 2b32978ae905a1bc9b22c6b904be4e97f5277866..ad58e565fe988d75286e27f83787b3f9e0856530 100644 --- a/arch/arm/kernel/iwmmxt.S +++ b/arch/arm/kernel/iwmmxt.S @@ -100,7 +100,7 @@ ENTRY(iwmmxt_task_enable) get_thread_info r10 #endif 4: dec_preempt_count r10, r3 - mov pc, r9 @ normal exit from exception + ret r9 @ normal exit from exception concan_save: @@ -144,7 +144,7 @@ concan_dump: wstrd wR15, [r1, #MMX_WR15] 2: teq r0, #0 @ anything to load? - moveq pc, lr @ if not, return + reteq lr @ if not, return concan_load: @@ -177,10 +177,10 @@ concan_load: @ clear CUP/MUP (only if r1 != 0) teq r1, #0 mov r2, #0 - moveq pc, lr + reteq lr tmcr wCon, r2 - mov pc, lr + ret lr /* * Back up Concan regs to save area and disable access to them @@ -266,7 +266,7 @@ ENTRY(iwmmxt_task_copy) mov r3, lr @ preserve return address bl concan_dump msr cpsr_c, ip @ restore interrupt mode - mov pc, r3 + ret r3 /* * Restore Concan state from given memory address @@ -302,7 +302,7 @@ ENTRY(iwmmxt_task_restore) mov r3, lr @ preserve return address bl concan_load msr cpsr_c, ip @ restore interrupt mode - mov pc, r3 + ret r3 /* * Concan handling on task switch @@ -324,7 +324,7 @@ ENTRY(iwmmxt_task_switch) add r3, r0, #TI_IWMMXT_STATE @ get next task Concan save area ldr r2, [r2] @ get current Concan owner teq r2, r3 @ next task owns it? - movne pc, lr @ no: leave Concan disabled + retne lr @ no: leave Concan disabled 1: @ flip Concan access XSC(eor r1, r1, #0x3) @@ -351,7 +351,7 @@ ENTRY(iwmmxt_task_release) eors r0, r0, r1 @ if equal... streq r0, [r3] @ then clear ownership msr cpsr_c, r2 @ restore interrupts - mov pc, lr + ret lr .data concan_owner: diff --git a/arch/arm/kernel/perf_event.c b/arch/arm/kernel/perf_event.c index 4238bcba9d60fc0aaa697a2a83818556db7c66cf..266cba46db3efe4f92c554320ac9668d098cdf7f 100644 --- a/arch/arm/kernel/perf_event.c +++ b/arch/arm/kernel/perf_event.c @@ -560,11 +560,16 @@ user_backtrace(struct frame_tail __user *tail, struct perf_callchain_entry *entry) { struct frame_tail buftail; + unsigned long err; - /* Also check accessibility of one struct frame_tail beyond */ if (!access_ok(VERIFY_READ, tail, sizeof(buftail))) return NULL; - if (__copy_from_user_inatomic(&buftail, tail, sizeof(buftail))) + + pagefault_disable(); + err = __copy_from_user_inatomic(&buftail, tail, sizeof(buftail)); + pagefault_enable(); + + if (err) return NULL; perf_callchain_store(entry, buftail.lr); @@ -590,6 +595,10 @@ perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs) } perf_callchain_store(entry, regs->ARM_pc); + + if (!current->mm) + return; + tail = (struct frame_tail __user *)regs->ARM_fp - 1; while ((entry->nr < PERF_MAX_STACK_DEPTH) && @@ -621,10 +630,7 @@ perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs) return; } - fr.fp = regs->ARM_fp; - fr.sp = regs->ARM_sp; - fr.lr = regs->ARM_lr; - fr.pc = regs->ARM_pc; + arm_get_current_stackframe(regs, &fr); walk_stackframe(&fr, callchain_trace, entry); } diff --git a/arch/arm/kernel/perf_event_cpu.c b/arch/arm/kernel/perf_event_cpu.c index af9e35e8836f1f3de2d9a4aaeee0c9445ce23740..e6a6edbec6135de27cf0d6426185cec90654f6fc 100644 --- a/arch/arm/kernel/perf_event_cpu.c +++ b/arch/arm/kernel/perf_event_cpu.c @@ -233,14 +233,17 @@ static struct of_device_id cpu_pmu_of_device_ids[] = { {.compatible = "arm,cortex-a7-pmu", .data = armv7_a7_pmu_init}, {.compatible = "arm,cortex-a5-pmu", .data = armv7_a5_pmu_init}, {.compatible = "arm,arm11mpcore-pmu", .data = armv6mpcore_pmu_init}, - {.compatible = "arm,arm1176-pmu", .data = armv6pmu_init}, - {.compatible = "arm,arm1136-pmu", .data = armv6pmu_init}, + {.compatible = "arm,arm1176-pmu", .data = armv6_1176_pmu_init}, + {.compatible = "arm,arm1136-pmu", .data = armv6_1136_pmu_init}, {.compatible = "qcom,krait-pmu", .data = krait_pmu_init}, {}, }; static struct platform_device_id cpu_pmu_plat_device_ids[] = { {.name = "arm-pmu"}, + {.name = "armv6-pmu"}, + {.name = "armv7-pmu"}, + {.name = "xscale-pmu"}, {}, }; @@ -250,40 +253,43 @@ static struct platform_device_id cpu_pmu_plat_device_ids[] = { static int probe_current_pmu(struct arm_pmu *pmu) { int cpu = get_cpu(); - unsigned long implementor = read_cpuid_implementor(); - unsigned long part_number = read_cpuid_part_number(); int ret = -ENODEV; pr_info("probing PMU on CPU %d\n", cpu); + switch (read_cpuid_part()) { /* ARM Ltd CPUs. */ - if (implementor == ARM_CPU_IMP_ARM) { - switch (part_number) { - case ARM_CPU_PART_ARM1136: - case ARM_CPU_PART_ARM1156: - case ARM_CPU_PART_ARM1176: - ret = armv6pmu_init(pmu); - break; - case ARM_CPU_PART_ARM11MPCORE: - ret = armv6mpcore_pmu_init(pmu); - break; - case ARM_CPU_PART_CORTEX_A8: - ret = armv7_a8_pmu_init(pmu); - break; - case ARM_CPU_PART_CORTEX_A9: - ret = armv7_a9_pmu_init(pmu); - break; - } - /* Intel CPUs [xscale]. */ - } else if (implementor == ARM_CPU_IMP_INTEL) { - switch (xscale_cpu_arch_version()) { - case ARM_CPU_XSCALE_ARCH_V1: - ret = xscale1pmu_init(pmu); - break; - case ARM_CPU_XSCALE_ARCH_V2: - ret = xscale2pmu_init(pmu); - break; + case ARM_CPU_PART_ARM1136: + ret = armv6_1136_pmu_init(pmu); + break; + case ARM_CPU_PART_ARM1156: + ret = armv6_1156_pmu_init(pmu); + break; + case ARM_CPU_PART_ARM1176: + ret = armv6_1176_pmu_init(pmu); + break; + case ARM_CPU_PART_ARM11MPCORE: + ret = armv6mpcore_pmu_init(pmu); + break; + case ARM_CPU_PART_CORTEX_A8: + ret = armv7_a8_pmu_init(pmu); + break; + case ARM_CPU_PART_CORTEX_A9: + ret = armv7_a9_pmu_init(pmu); + break; + + default: + if (read_cpuid_implementor() == ARM_CPU_IMP_INTEL) { + switch (xscale_cpu_arch_version()) { + case ARM_CPU_XSCALE_ARCH_V1: + ret = xscale1pmu_init(pmu); + break; + case ARM_CPU_XSCALE_ARCH_V2: + ret = xscale2pmu_init(pmu); + break; + } } + break; } put_cpu(); diff --git a/arch/arm/kernel/perf_event_v6.c b/arch/arm/kernel/perf_event_v6.c index 03664b0e8fa426ae444d70834e6a263427f31fdf..abfeb04f3213e1fbd6fb93e07114d7475e249922 100644 --- a/arch/arm/kernel/perf_event_v6.c +++ b/arch/arm/kernel/perf_event_v6.c @@ -65,13 +65,11 @@ enum armv6_counters { * accesses/misses in hardware. */ static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV6_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6_PERFCTR_INSTR_EXEC, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6_PERFCTR_BR_EXEC, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6_PERFCTR_BR_MISPREDICT, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6_PERFCTR_IBUF_STALL, [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6_PERFCTR_LSU_FULL_STALL, }; @@ -79,116 +77,31 @@ static const unsigned armv6_perf_map[PERF_COUNT_HW_MAX] = { static const unsigned armv6_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * The ARM performance counters can count micro DTLB misses, - * micro ITLB misses and main TLB misses. There isn't an event - * for TLB misses, so use the micro misses here and if users - * want the main TLB misses they can use a raw counter. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + /* + * The performance counters don't differentiate between read and write + * accesses/misses so this isn't strictly correct, but it's the best we + * can do. Writes and reads get combined. + */ + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV6_PERFCTR_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_DCACHE_MISS, + + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_ICACHE_MISS, + + /* + * The ARM performance counters can count micro DTLB misses, micro ITLB + * misses and main TLB misses. There isn't an event for TLB misses, so + * use the micro misses here and if users want the main TLB misses they + * can use a raw counter. + */ + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_DTLB_MISS, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6_PERFCTR_ITLB_MISS, }; enum armv6mpcore_perf_types { @@ -220,13 +133,11 @@ enum armv6mpcore_perf_types { * accesses/misses in hardware. */ static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV6MPCORE_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_INSTR_EXEC, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV6MPCORE_PERFCTR_BR_EXEC, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV6MPCORE_PERFCTR_BR_MISPREDICT, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV6MPCORE_PERFCTR_IBUF_STALL, [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV6MPCORE_PERFCTR_LSU_FULL_STALL, }; @@ -234,114 +145,26 @@ static const unsigned armv6mpcore_perf_map[PERF_COUNT_HW_MAX] = { static const unsigned armv6mpcore_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = - ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS, - [C(RESULT_MISS)] = - ARMV6MPCORE_PERFCTR_DCACHE_RDMISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = - ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS, - [C(RESULT_MISS)] = - ARMV6MPCORE_PERFCTR_DCACHE_WRMISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - /* - * The ARM performance counters can count micro DTLB misses, - * micro ITLB misses and main TLB misses. There isn't an event - * for TLB misses, so use the micro misses here and if users - * want the main TLB misses they can use a raw counter. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV6MPCORE_PERFCTR_DCACHE_RDACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DCACHE_RDMISS, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV6MPCORE_PERFCTR_DCACHE_WRACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DCACHE_WRMISS, + + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ICACHE_MISS, + + /* + * The ARM performance counters can count micro DTLB misses, micro ITLB + * misses and main TLB misses. There isn't an event for TLB misses, so + * use the micro misses here and if users want the main TLB misses they + * can use a raw counter. + */ + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_DTLB_MISS, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV6MPCORE_PERFCTR_ITLB_MISS, }; static inline unsigned long @@ -653,9 +476,8 @@ static int armv6_map_event(struct perf_event *event) &armv6_perf_cache_map, 0xFF); } -static int armv6pmu_init(struct arm_pmu *cpu_pmu) +static void armv6pmu_init(struct arm_pmu *cpu_pmu) { - cpu_pmu->name = "v6"; cpu_pmu->handle_irq = armv6pmu_handle_irq; cpu_pmu->enable = armv6pmu_enable_event; cpu_pmu->disable = armv6pmu_disable_event; @@ -667,7 +489,26 @@ static int armv6pmu_init(struct arm_pmu *cpu_pmu) cpu_pmu->map_event = armv6_map_event; cpu_pmu->num_events = 3; cpu_pmu->max_period = (1LLU << 32) - 1; +} + +static int armv6_1136_pmu_init(struct arm_pmu *cpu_pmu) +{ + armv6pmu_init(cpu_pmu); + cpu_pmu->name = "armv6_1136"; + return 0; +} +static int armv6_1156_pmu_init(struct arm_pmu *cpu_pmu) +{ + armv6pmu_init(cpu_pmu); + cpu_pmu->name = "armv6_1156"; + return 0; +} + +static int armv6_1176_pmu_init(struct arm_pmu *cpu_pmu) +{ + armv6pmu_init(cpu_pmu); + cpu_pmu->name = "armv6_1176"; return 0; } @@ -687,7 +528,7 @@ static int armv6mpcore_map_event(struct perf_event *event) static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) { - cpu_pmu->name = "v6mpcore"; + cpu_pmu->name = "armv6_11mpcore"; cpu_pmu->handle_irq = armv6pmu_handle_irq; cpu_pmu->enable = armv6pmu_enable_event; cpu_pmu->disable = armv6mpcore_pmu_disable_event; @@ -703,7 +544,17 @@ static int armv6mpcore_pmu_init(struct arm_pmu *cpu_pmu) return 0; } #else -static int armv6pmu_init(struct arm_pmu *cpu_pmu) +static int armv6_1136_pmu_init(struct arm_pmu *cpu_pmu) +{ + return -ENODEV; +} + +static int armv6_1156_pmu_init(struct arm_pmu *cpu_pmu) +{ + return -ENODEV; +} + +static int armv6_1176_pmu_init(struct arm_pmu *cpu_pmu) { return -ENODEV; } diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c index 1d37568c547aefa9d6ae883805e980def09316d0..116758b77f930bace4b6c59b4ee0dcc71963690b 100644 --- a/arch/arm/kernel/perf_event_v7.c +++ b/arch/arm/kernel/perf_event_v7.c @@ -148,137 +148,62 @@ enum krait_perf_types { * accesses/misses in hardware. */ static const unsigned armv7_a8_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV7_A8_PERFCTR_STALL_ISIDE, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned armv7_a8_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + /* + * The performance counters don't differentiate between read and write + * accesses/misses so this isn't strictly correct, but it's the best we + * can do. Writes and reads get combined. + */ + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L1_ICACHE_ACCESS, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + + [C(LL)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS, + [C(LL)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL, + [C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A8_PERFCTR_L2_CACHE_ACCESS, + [C(LL)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_A8_PERFCTR_L2_CACHE_REFILL, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; /* * Cortex-A9 HW events mapping */ static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_A9_PERFCTR_INSTR_CORE_RENAME, [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = ARMV7_A9_PERFCTR_STALL_ICACHE, [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = ARMV7_A9_PERFCTR_STALL_DISPATCH, }; @@ -286,238 +211,83 @@ static const unsigned armv7_a9_perf_map[PERF_COUNT_HW_MAX] = { static const unsigned armv7_a9_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + /* + * The performance counters don't differentiate between read and write + * accesses/misses so this isn't strictly correct, but it's the best we + * can do. Writes and reads get combined. + */ + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; /* * Cortex-A5 HW events mapping */ static const unsigned armv7_a5_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, [PERF_COUNT_HW_CACHE_MISSES] = ARMV7_PERFCTR_L1_DCACHE_REFILL, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL, - [C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - /* - * The prefetch counters don't differentiate between the I - * side and the D side. - */ - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL, - [C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_PREFETCH)][C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL, + [C(L1D)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP, + + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + /* + * The prefetch counters don't differentiate between the I side and the + * D side. + */ + [C(L1I)][C(OP_PREFETCH)][C(RESULT_ACCESS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL, + [C(L1I)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV7_A5_PERFCTR_PREFETCH_LINEFILL_DROP, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; /* * Cortex-A15 HW events mapping */ static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, @@ -525,123 +295,48 @@ static const unsigned armv7_a15_perf_map[PERF_COUNT_HW_MAX] = { [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_A15_PERFCTR_PC_WRITE_SPEC, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES, - [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ, - [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE, - [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - /* - * Not all performance counters differentiate between read - * and write accesses/misses so we're not always strictly - * correct, but it's the best we can do. Writes and reads get - * combined in these cases. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ, - [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE, - [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_READ, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_READ, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L1_DCACHE_ACCESS_WRITE, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L1_DCACHE_REFILL_WRITE, + + /* + * Not all performance counters differentiate between read and write + * accesses/misses so we're not always strictly correct, but it's the + * best we can do. Writes and reads get combined in these cases. + */ + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + + [C(LL)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_READ, + [C(LL)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_READ, + [C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A15_PERFCTR_L2_CACHE_ACCESS_WRITE, + [C(LL)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_L2_CACHE_REFILL_WRITE, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_READ, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_A15_PERFCTR_DTLB_REFILL_L1_WRITE, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; /* * Cortex-A7 HW events mapping */ static const unsigned armv7_a7_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, @@ -649,123 +344,48 @@ static const unsigned armv7_a7_perf_map[PERF_COUNT_HW_MAX] = { [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES, - [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned armv7_a7_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_CACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_CACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + /* + * The performance counters don't differentiate between read and write + * accesses/misses so this isn't strictly correct, but it's the best we + * can do. Writes and reads get combined. + */ + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + + [C(LL)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_CACHE_ACCESS, + [C(LL)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, + [C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L2_CACHE_ACCESS, + [C(LL)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; /* * Cortex-A12 HW events mapping */ static const unsigned armv7_a12_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, [PERF_COUNT_HW_CACHE_REFERENCES] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, @@ -773,138 +393,60 @@ static const unsigned armv7_a12_perf_map[PERF_COUNT_HW_MAX] = { [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_A12_PERFCTR_PC_WRITE_SPEC, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_BUS_CYCLES, - [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned armv7_a12_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - /* - * Not all performance counters differentiate between read - * and write accesses/misses so we're not always strictly - * correct, but it's the best we can do. Writes and reads get - * combined in these cases. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_A12_PERFCTR_PF_TLB_REFILL, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_READ, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L1_DCACHE_ACCESS_WRITE, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + + /* + * Not all performance counters differentiate between read and write + * accesses/misses so we're not always strictly correct, but it's the + * best we can do. Writes and reads get combined in these cases. + */ + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_ICACHE_ACCESS, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_ICACHE_REFILL, + + [C(LL)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_READ, + [C(LL)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, + [C(LL)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_A12_PERFCTR_L2_CACHE_ACCESS_WRITE, + [C(LL)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L2_CACHE_REFILL, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_DTLB_REFILL, + [C(DTLB)][C(OP_PREFETCH)][C(RESULT_MISS)] = ARMV7_A12_PERFCTR_PF_TLB_REFILL, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_ITLB_REFILL, + + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; /* * Krait HW events mapping */ static const unsigned krait_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = ARMV7_PERFCTR_PC_WRITE, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, }; static const unsigned krait_perf_map_no_branch[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = ARMV7_PERFCTR_CPU_CYCLES, [PERF_COUNT_HW_INSTRUCTIONS] = ARMV7_PERFCTR_INSTR_EXECUTED, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_BRANCH_MISSES] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, [PERF_COUNT_HW_BUS_CYCLES] = ARMV7_PERFCTR_CLOCK_CYCLES, }; @@ -912,110 +454,31 @@ static const unsigned krait_perf_map_no_branch[PERF_COUNT_HW_MAX] = { static const unsigned krait_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - /* - * The performance counters don't differentiate between read - * and write accesses/misses so this isn't strictly correct, - * but it's the best we can do. Writes and reads get - * combined. - */ - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, - [C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ICACHE_ACCESS, - [C(RESULT_MISS)] = KRAIT_PERFCTR_L1_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_DTLB_ACCESS, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_DTLB_ACCESS, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ITLB_ACCESS, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ITLB_ACCESS, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, - [C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + /* + * The performance counters don't differentiate between read and write + * accesses/misses so this isn't strictly correct, but it's the best we + * can do. Writes and reads get combined. + */ + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_L1_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_L1_DCACHE_REFILL, + + [C(L1I)][C(OP_READ)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ICACHE_ACCESS, + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = KRAIT_PERFCTR_L1_ICACHE_MISS, + + [C(DTLB)][C(OP_READ)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_DTLB_ACCESS, + [C(DTLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_DTLB_ACCESS, + + [C(ITLB)][C(OP_READ)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ITLB_ACCESS, + [C(ITLB)][C(OP_WRITE)][C(RESULT_ACCESS)] = KRAIT_PERFCTR_L1_ITLB_ACCESS, + + [C(BPU)][C(OP_READ)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_READ)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_ACCESS)] = ARMV7_PERFCTR_PC_BRANCH_PRED, + [C(BPU)][C(OP_WRITE)][C(RESULT_MISS)] = ARMV7_PERFCTR_PC_BRANCH_MIS_PRED, }; /* @@ -1545,7 +1008,7 @@ static u32 armv7_read_num_pmnc_events(void) static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Cortex-A8"; + cpu_pmu->name = "armv7_cortex_a8"; cpu_pmu->map_event = armv7_a8_map_event; cpu_pmu->num_events = armv7_read_num_pmnc_events(); return 0; @@ -1554,7 +1017,7 @@ static int armv7_a8_pmu_init(struct arm_pmu *cpu_pmu) static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Cortex-A9"; + cpu_pmu->name = "armv7_cortex_a9"; cpu_pmu->map_event = armv7_a9_map_event; cpu_pmu->num_events = armv7_read_num_pmnc_events(); return 0; @@ -1563,7 +1026,7 @@ static int armv7_a9_pmu_init(struct arm_pmu *cpu_pmu) static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Cortex-A5"; + cpu_pmu->name = "armv7_cortex_a5"; cpu_pmu->map_event = armv7_a5_map_event; cpu_pmu->num_events = armv7_read_num_pmnc_events(); return 0; @@ -1572,7 +1035,7 @@ static int armv7_a5_pmu_init(struct arm_pmu *cpu_pmu) static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Cortex-A15"; + cpu_pmu->name = "armv7_cortex_a15"; cpu_pmu->map_event = armv7_a15_map_event; cpu_pmu->num_events = armv7_read_num_pmnc_events(); cpu_pmu->set_event_filter = armv7pmu_set_event_filter; @@ -1582,7 +1045,7 @@ static int armv7_a15_pmu_init(struct arm_pmu *cpu_pmu) static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Cortex-A7"; + cpu_pmu->name = "armv7_cortex_a7"; cpu_pmu->map_event = armv7_a7_map_event; cpu_pmu->num_events = armv7_read_num_pmnc_events(); cpu_pmu->set_event_filter = armv7pmu_set_event_filter; @@ -1592,7 +1055,7 @@ static int armv7_a7_pmu_init(struct arm_pmu *cpu_pmu) static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Cortex-A12"; + cpu_pmu->name = "armv7_cortex_a12"; cpu_pmu->map_event = armv7_a12_map_event; cpu_pmu->num_events = armv7_read_num_pmnc_events(); cpu_pmu->set_event_filter = armv7pmu_set_event_filter; @@ -1602,7 +1065,7 @@ static int armv7_a12_pmu_init(struct arm_pmu *cpu_pmu) static int armv7_a17_pmu_init(struct arm_pmu *cpu_pmu) { armv7_a12_pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Cortex-A17"; + cpu_pmu->name = "armv7_cortex_a17"; return 0; } @@ -1823,6 +1286,7 @@ static void krait_pmu_disable_event(struct perf_event *event) unsigned long flags; struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); struct pmu_hw_events *events = cpu_pmu->get_hw_events(); /* Disable counter and interrupt */ @@ -1848,6 +1312,7 @@ static void krait_pmu_enable_event(struct perf_event *event) unsigned long flags; struct hw_perf_event *hwc = &event->hw; int idx = hwc->idx; + struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu); struct pmu_hw_events *events = cpu_pmu->get_hw_events(); /* @@ -1981,7 +1446,7 @@ static void krait_pmu_clear_event_idx(struct pmu_hw_events *cpuc, static int krait_pmu_init(struct arm_pmu *cpu_pmu) { armv7pmu_init(cpu_pmu); - cpu_pmu->name = "ARMv7 Krait"; + cpu_pmu->name = "armv7_krait"; /* Some early versions of Krait don't support PC write events */ if (of_property_read_bool(cpu_pmu->plat_device->dev.of_node, "qcom,no-pc-write")) diff --git a/arch/arm/kernel/perf_event_xscale.c b/arch/arm/kernel/perf_event_xscale.c index 63990c42fac9318131a35f93a573c99f53d0bd7b..08da0af550b7912e184080680347f7d9dccba7cf 100644 --- a/arch/arm/kernel/perf_event_xscale.c +++ b/arch/arm/kernel/perf_event_xscale.c @@ -48,118 +48,31 @@ enum xscale_counters { }; static const unsigned xscale_perf_map[PERF_COUNT_HW_MAX] = { + PERF_MAP_ALL_UNSUPPORTED, [PERF_COUNT_HW_CPU_CYCLES] = XSCALE_PERFCTR_CCNT, [PERF_COUNT_HW_INSTRUCTIONS] = XSCALE_PERFCTR_INSTRUCTION, - [PERF_COUNT_HW_CACHE_REFERENCES] = HW_OP_UNSUPPORTED, - [PERF_COUNT_HW_CACHE_MISSES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_BRANCH_INSTRUCTIONS] = XSCALE_PERFCTR_BRANCH, [PERF_COUNT_HW_BRANCH_MISSES] = XSCALE_PERFCTR_BRANCH_MISS, - [PERF_COUNT_HW_BUS_CYCLES] = HW_OP_UNSUPPORTED, [PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = XSCALE_PERFCTR_ICACHE_NO_DELIVER, - [PERF_COUNT_HW_STALLED_CYCLES_BACKEND] = HW_OP_UNSUPPORTED, }; static const unsigned xscale_perf_cache_map[PERF_COUNT_HW_CACHE_MAX] [PERF_COUNT_HW_CACHE_OP_MAX] [PERF_COUNT_HW_CACHE_RESULT_MAX] = { - [C(L1D)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(L1I)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(LL)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(DTLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(ITLB)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(BPU)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, - [C(NODE)] = { - [C(OP_READ)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_WRITE)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - [C(OP_PREFETCH)] = { - [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED, - [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED, - }, - }, + PERF_CACHE_MAP_ALL_UNSUPPORTED, + + [C(L1D)][C(OP_READ)][C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, + [C(L1D)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, + [C(L1D)][C(OP_WRITE)][C(RESULT_ACCESS)] = XSCALE_PERFCTR_DCACHE_ACCESS, + [C(L1D)][C(OP_WRITE)][C(RESULT_MISS)] = XSCALE_PERFCTR_DCACHE_MISS, + + [C(L1I)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_ICACHE_MISS, + + [C(DTLB)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, + [C(DTLB)][C(OP_WRITE)][C(RESULT_MISS)] = XSCALE_PERFCTR_DTLB_MISS, + + [C(ITLB)][C(OP_READ)][C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, + [C(ITLB)][C(OP_WRITE)][C(RESULT_MISS)] = XSCALE_PERFCTR_ITLB_MISS, }; #define XSCALE_PMU_ENABLE 0x001 @@ -442,7 +355,7 @@ static int xscale_map_event(struct perf_event *event) static int xscale1pmu_init(struct arm_pmu *cpu_pmu) { - cpu_pmu->name = "xscale1"; + cpu_pmu->name = "armv5_xscale1"; cpu_pmu->handle_irq = xscale1pmu_handle_irq; cpu_pmu->enable = xscale1pmu_enable_event; cpu_pmu->disable = xscale1pmu_disable_event; @@ -812,7 +725,7 @@ static inline void xscale2pmu_write_counter(struct perf_event *event, u32 val) static int xscale2pmu_init(struct arm_pmu *cpu_pmu) { - cpu_pmu->name = "xscale2"; + cpu_pmu->name = "armv5_xscale2"; cpu_pmu->handle_irq = xscale2pmu_handle_irq; cpu_pmu->enable = xscale2pmu_enable_event; cpu_pmu->disable = xscale2pmu_disable_event; diff --git a/arch/arm/kernel/relocate_kernel.S b/arch/arm/kernel/relocate_kernel.S index 95858966d84ec0f10d392a3356cb0367fcee0b85..35e72585ec1d56a541fa7afd9c332c24e28a65fc 100644 --- a/arch/arm/kernel/relocate_kernel.S +++ b/arch/arm/kernel/relocate_kernel.S @@ -3,6 +3,7 @@ */ #include +#include #include .align 3 /* not needed for this code, but keeps fncpy() happy */ @@ -59,7 +60,7 @@ ENTRY(relocate_new_kernel) mov r0,#0 ldr r1,kexec_mach_type ldr r2,kexec_boot_atags - ARM( mov pc, lr ) + ARM( ret lr ) THUMB( bx lr ) .align diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 8a16ee5d8a953f6c54ed6c14ed394d7ceae1fc37..84db893dedc27c9b79edb3d3a8845f3c39e0c859 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -393,19 +393,34 @@ static void __init cpuid_init_hwcaps(void) elf_hwcap |= HWCAP_LPAE; } -static void __init feat_v6_fixup(void) +static void __init elf_hwcap_fixup(void) { - int id = read_cpuid_id(); - - if ((id & 0xff0f0000) != 0x41070000) - return; + unsigned id = read_cpuid_id(); + unsigned sync_prim; /* * HWCAP_TLS is available only on 1136 r1p0 and later, * see also kuser_get_tls_init. */ - if ((((id >> 4) & 0xfff) == 0xb36) && (((id >> 20) & 3) == 0)) + if (read_cpuid_part() == ARM_CPU_PART_ARM1136 && + ((id >> 20) & 3) == 0) { elf_hwcap &= ~HWCAP_TLS; + return; + } + + /* Verify if CPUID scheme is implemented */ + if ((id & 0x000f0000) != 0x000f0000) + return; + + /* + * If the CPU supports LDREX/STREX and LDREXB/STREXB, + * avoid advertising SWP; it may not be atomic with + * multiprocessing cores. + */ + sync_prim = ((read_cpuid_ext(CPUID_EXT_ISAR3) >> 8) & 0xf0) | + ((read_cpuid_ext(CPUID_EXT_ISAR4) >> 20) & 0x0f); + if (sync_prim >= 0x13) + elf_hwcap &= ~HWCAP_SWP; } /* @@ -609,7 +624,7 @@ static void __init setup_processor(void) #endif erratum_a15_798181_init(); - feat_v6_fixup(); + elf_hwcap_fixup(); cacheid_init(); cpu_init(); diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S index 1b880db2a0338fc08cc1b7355ee71eee7d142172..e1e60e5a7a271eee56d34a69e55111b3ce0daf2d 100644 --- a/arch/arm/kernel/sleep.S +++ b/arch/arm/kernel/sleep.S @@ -107,7 +107,7 @@ ENTRY(cpu_resume_mmu) instr_sync mov r0, r0 mov r0, r0 - mov pc, r3 @ jump to virtual address + ret r3 @ jump to virtual address ENDPROC(cpu_resume_mmu) .popsection cpu_resume_after_mmu: diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 7c4fada440f0fd5d4cdfe575b972beba689e6985..9388a3d479e1372279d67e95ba637b91f73c679f 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -47,6 +47,9 @@ #include #include +#define CREATE_TRACE_POINTS +#include + /* * as from 2.5, kernels no longer have an init_tasks structure * so we need some other way of telling a new secondary core @@ -430,38 +433,15 @@ void __init smp_prepare_cpus(unsigned int max_cpus) } } -static void (*smp_cross_call)(const struct cpumask *, unsigned int); +static void (*__smp_cross_call)(const struct cpumask *, unsigned int); void __init set_smp_cross_call(void (*fn)(const struct cpumask *, unsigned int)) { - if (!smp_cross_call) - smp_cross_call = fn; -} - -void arch_send_call_function_ipi_mask(const struct cpumask *mask) -{ - smp_cross_call(mask, IPI_CALL_FUNC); -} - -void arch_send_wakeup_ipi_mask(const struct cpumask *mask) -{ - smp_cross_call(mask, IPI_WAKEUP); -} - -void arch_send_call_function_single_ipi(int cpu) -{ - smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); + if (!__smp_cross_call) + __smp_cross_call = fn; } -#ifdef CONFIG_IRQ_WORK -void arch_irq_work_raise(void) -{ - if (is_smp()) - smp_cross_call(cpumask_of(smp_processor_id()), IPI_IRQ_WORK); -} -#endif - -static const char *ipi_types[NR_IPI] = { +static const char *ipi_types[NR_IPI] __tracepoint_string = { #define S(x,s) [x] = s S(IPI_WAKEUP, "CPU wakeup interrupts"), S(IPI_TIMER, "Timer broadcast interrupts"), @@ -473,6 +453,12 @@ static const char *ipi_types[NR_IPI] = { S(IPI_COMPLETION, "completion interrupts"), }; +static void smp_cross_call(const struct cpumask *target, unsigned int ipinr) +{ + trace_ipi_raise(target, ipi_types[ipinr]); + __smp_cross_call(target, ipinr); +} + void show_ipi_list(struct seq_file *p, int prec) { unsigned int cpu, i; @@ -499,6 +485,29 @@ u64 smp_irq_stat_cpu(unsigned int cpu) return sum; } +void arch_send_call_function_ipi_mask(const struct cpumask *mask) +{ + smp_cross_call(mask, IPI_CALL_FUNC); +} + +void arch_send_wakeup_ipi_mask(const struct cpumask *mask) +{ + smp_cross_call(mask, IPI_WAKEUP); +} + +void arch_send_call_function_single_ipi(int cpu) +{ + smp_cross_call(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE); +} + +#ifdef CONFIG_IRQ_WORK +void arch_irq_work_raise(void) +{ + if (is_smp()) + smp_cross_call(cpumask_of(smp_processor_id()), IPI_IRQ_WORK); +} +#endif + #ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST void tick_broadcast(const struct cpumask *mask) { @@ -556,8 +565,10 @@ void handle_IPI(int ipinr, struct pt_regs *regs) unsigned int cpu = smp_processor_id(); struct pt_regs *old_regs = set_irq_regs(regs); - if (ipinr < NR_IPI) + if ((unsigned)ipinr < NR_IPI) { + trace_ipi_entry(ipi_types[ipinr]); __inc_irq_stat(cpu, ipi_irqs[ipinr]); + } switch (ipinr) { case IPI_WAKEUP: @@ -612,6 +623,9 @@ void handle_IPI(int ipinr, struct pt_regs *regs) cpu, ipinr); break; } + + if ((unsigned)ipinr < NR_IPI) + trace_ipi_exit(ipi_types[ipinr]); set_irq_regs(old_regs); } diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 1aafa0d785eb835dd50d6036a855fc2bbf8ea32e..72f9241ad5dba5eb42fe7d5e5e31be456a96ad97 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -17,6 +17,8 @@ #include #define SCU_CTRL 0x00 +#define SCU_ENABLE (1 << 0) +#define SCU_STANDBY_ENABLE (1 << 5) #define SCU_CONFIG 0x04 #define SCU_CPU_STATUS 0x08 #define SCU_INVALIDATE 0x0c @@ -50,10 +52,16 @@ void scu_enable(void __iomem *scu_base) scu_ctrl = readl_relaxed(scu_base + SCU_CTRL); /* already enabled? */ - if (scu_ctrl & 1) + if (scu_ctrl & SCU_ENABLE) return; - scu_ctrl |= 1; + scu_ctrl |= SCU_ENABLE; + + /* Cortex-A9 earlier than r2p0 has no standby bit in SCU */ + if ((read_cpuid_id() & 0xff0ffff0) == 0x410fc090 && + (read_cpuid_id() & 0x00f0000f) >= 0x00200000) + scu_ctrl |= SCU_STANDBY_ENABLE; + writel_relaxed(scu_ctrl, scu_base + SCU_CTRL); /* diff --git a/arch/arm/kernel/smp_tlb.c b/arch/arm/kernel/smp_tlb.c index 95d063620b76a6f706bccc23635537ed4bceb01a..2e72be4f623e22284f8b0ae1c441b30b867e7c0c 100644 --- a/arch/arm/kernel/smp_tlb.c +++ b/arch/arm/kernel/smp_tlb.c @@ -92,15 +92,19 @@ void erratum_a15_798181_init(void) unsigned int midr = read_cpuid_id(); unsigned int revidr = read_cpuid(CPUID_REVIDR); - /* Cortex-A15 r0p0..r3p2 w/o ECO fix affected */ - if ((midr & 0xff0ffff0) != 0x410fc0f0 || midr > 0x413fc0f2 || - (revidr & 0x210) == 0x210) { - return; - } - if (revidr & 0x10) - erratum_a15_798181_handler = erratum_a15_798181_partial; - else + /* Brahma-B15 r0p0..r0p2 affected + * Cortex-A15 r0p0..r3p2 w/o ECO fix affected */ + if ((midr & 0xff0ffff0) == 0x420f00f0 && midr <= 0x420f00f2) erratum_a15_798181_handler = erratum_a15_798181_broadcast; + else if ((midr & 0xff0ffff0) == 0x410fc0f0 && midr <= 0x413fc0f2 && + (revidr & 0x210) != 0x210) { + if (revidr & 0x10) + erratum_a15_798181_handler = + erratum_a15_798181_partial; + else + erratum_a15_798181_handler = + erratum_a15_798181_broadcast; + } } #endif diff --git a/arch/arm/kernel/swp_emulate.c b/arch/arm/kernel/swp_emulate.c index b1b89882b113fb26ecc93a30888ec63c4b3fc84b..67ca8578c6d8fd9adf35cfebbe0d75cdda8d4786 100644 --- a/arch/arm/kernel/swp_emulate.c +++ b/arch/arm/kernel/swp_emulate.c @@ -27,6 +27,7 @@ #include #include +#include #include #include @@ -266,6 +267,9 @@ static struct undef_hook swp_hook = { */ static int __init swp_emulation_init(void) { + if (cpu_architecture() < CPU_ARCH_ARMv7) + return 0; + #ifdef CONFIG_PROC_FS if (!proc_create("cpu/swp_emulation", S_IRUGO, NULL, &proc_status_fops)) return -ENOMEM; diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 829a96d4a179337019f1790ab2e50577f8cc3524..0cc7e58c47cc79fd53ab4feac1b9440300e7a562 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -50,10 +50,7 @@ unsigned long profile_pc(struct pt_regs *regs) if (!in_lock_functions(regs->ARM_pc)) return regs->ARM_pc; - frame.fp = regs->ARM_fp; - frame.sp = regs->ARM_sp; - frame.lr = regs->ARM_lr; - frame.pc = regs->ARM_pc; + arm_get_current_stackframe(regs, &frame); do { int ret = unwind_frame(&frame); if (ret < 0) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index abd2fc0677364a529d4c12479890f6b97770b41a..c8e4bb7149444ce9c2670c92345ea67ccb94eed8 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -31,11 +31,13 @@ #include #include #include +#include #include #include #include #include + static const char *handler[]= { "prefetch abort", "data abort", @@ -184,7 +186,7 @@ static void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk) tsk = current; if (regs) { - fp = regs->ARM_fp; + fp = frame_pointer(regs); mode = processor_mode(regs); } else if (tsk != current) { fp = thread_saved_fp(tsk); @@ -719,7 +721,7 @@ asmlinkage int arm_syscall(int no, struct pt_regs *regs) dump_instr("", regs); if (user_mode(regs)) { __show_regs(regs); - c_backtrace(regs->ARM_fp, processor_mode(regs)); + c_backtrace(frame_pointer(regs), processor_mode(regs)); } } #endif diff --git a/arch/arm/kernel/unwind.c b/arch/arm/kernel/unwind.c index e67682f02cb2772920d693f41329f7e76e631ac5..a61a1dfbb0db50ac44c1ca5a48ca7e71153e9b9b 100644 --- a/arch/arm/kernel/unwind.c +++ b/arch/arm/kernel/unwind.c @@ -479,12 +479,10 @@ void unwind_backtrace(struct pt_regs *regs, struct task_struct *tsk) tsk = current; if (regs) { - frame.fp = regs->ARM_fp; - frame.sp = regs->ARM_sp; - frame.lr = regs->ARM_lr; + arm_get_current_stackframe(regs, &frame); /* PC might be corrupted, use LR in that case. */ - frame.pc = kernel_text_address(regs->ARM_pc) - ? regs->ARM_pc : regs->ARM_lr; + if (!kernel_text_address(regs->ARM_pc)) + frame.pc = regs->ARM_lr; } else if (tsk == current) { frame.fp = (unsigned long)__builtin_frame_address(0); frame.sp = current_sp; diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 7bcee5c9b6049c2723df9e3e9fc9b0b088b5fe0b..6f57cb94367fed3697ae3628bcc5b16fc9f8a5be 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -318,7 +318,6 @@ SECTIONS _end = .; STABS_DEBUG - .comment 0 : { *(.comment) } } /* diff --git a/arch/arm/kvm/Kconfig b/arch/arm/kvm/Kconfig index 4be5bb150bdddea694fbf71bffa6dd8e9b855177..466bd299b1a8aad54949364d976d9c5430c2375e 100644 --- a/arch/arm/kvm/Kconfig +++ b/arch/arm/kvm/Kconfig @@ -23,7 +23,7 @@ config KVM select HAVE_KVM_CPU_RELAX_INTERCEPT select KVM_MMIO select KVM_ARM_HOST - depends on ARM_VIRT_EXT && ARM_LPAE && !CPU_BIG_ENDIAN + depends on ARM_VIRT_EXT && ARM_LPAE ---help--- Support hosting virtualized guest machines. You will also need to select one or more of the processor modules below. diff --git a/arch/arm/kvm/Makefile b/arch/arm/kvm/Makefile index 789bca9e64a7fdeabe091df30db44daf8b4b1b40..f7057ed045b63bc0c42a240095f1a5927ad59de0 100644 --- a/arch/arm/kvm/Makefile +++ b/arch/arm/kvm/Makefile @@ -21,4 +21,5 @@ obj-y += kvm-arm.o init.o interrupts.o obj-y += arm.o handle_exit.o guest.o mmu.o emulate.o reset.o obj-y += coproc.o coproc_a15.o coproc_a7.o mmio.o psci.o perf.o obj-$(CONFIG_KVM_ARM_VGIC) += $(KVM)/arm/vgic.o +obj-$(CONFIG_KVM_ARM_VGIC) += $(KVM)/arm/vgic-v2.o obj-$(CONFIG_KVM_ARM_TIMER) += $(KVM)/arm/arch_timer.o diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c index 3c82b37c0f9edbe031718a67ac3c8426139f8862..a99e0cdf8ba2f3c1799b3a7c2013f8e024b8056e 100644 --- a/arch/arm/kvm/arm.c +++ b/arch/arm/kvm/arm.c @@ -155,16 +155,6 @@ int kvm_arch_vcpu_fault(struct kvm_vcpu *vcpu, struct vm_fault *vmf) return VM_FAULT_SIGBUS; } -void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free, - struct kvm_memory_slot *dont) -{ -} - -int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot, - unsigned long npages) -{ - return 0; -} /** * kvm_arch_destroy_vm - destroy the VM data structure @@ -184,7 +174,7 @@ void kvm_arch_destroy_vm(struct kvm *kvm) } } -int kvm_dev_ioctl_check_extension(long ext) +int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext) { int r; switch (ext) { @@ -225,33 +215,6 @@ long kvm_arch_dev_ioctl(struct file *filp, return -EINVAL; } -void kvm_arch_memslots_updated(struct kvm *kvm) -{ -} - -int kvm_arch_prepare_memory_region(struct kvm *kvm, - struct kvm_memory_slot *memslot, - struct kvm_userspace_memory_region *mem, - enum kvm_mr_change change) -{ - return 0; -} - -void kvm_arch_commit_memory_region(struct kvm *kvm, - struct kvm_userspace_memory_region *mem, - const struct kvm_memory_slot *old, - enum kvm_mr_change change) -{ -} - -void kvm_arch_flush_shadow_all(struct kvm *kvm) -{ -} - -void kvm_arch_flush_shadow_memslot(struct kvm *kvm, - struct kvm_memory_slot *slot) -{ -} struct kvm_vcpu *kvm_arch_vcpu_create(struct kvm *kvm, unsigned int id) { diff --git a/arch/arm/kvm/coproc.c b/arch/arm/kvm/coproc.c index c58a35116f6307781064761f919dcd2112e22c20..37a0fe1bb9bb3de3dbcb3139f4dc22b50f83063f 100644 --- a/arch/arm/kvm/coproc.c +++ b/arch/arm/kvm/coproc.c @@ -44,6 +44,31 @@ static u32 cache_levels; /* CSSELR values; used to index KVM_REG_ARM_DEMUX_ID_CCSIDR */ #define CSSELR_MAX 12 +/* + * kvm_vcpu_arch.cp15 holds cp15 registers as an array of u32, but some + * of cp15 registers can be viewed either as couple of two u32 registers + * or one u64 register. Current u64 register encoding is that least + * significant u32 word is followed by most significant u32 word. + */ +static inline void vcpu_cp15_reg64_set(struct kvm_vcpu *vcpu, + const struct coproc_reg *r, + u64 val) +{ + vcpu->arch.cp15[r->reg] = val & 0xffffffff; + vcpu->arch.cp15[r->reg + 1] = val >> 32; +} + +static inline u64 vcpu_cp15_reg64_get(struct kvm_vcpu *vcpu, + const struct coproc_reg *r) +{ + u64 val; + + val = vcpu->arch.cp15[r->reg + 1]; + val = val << 32; + val = val | vcpu->arch.cp15[r->reg]; + return val; +} + int kvm_handle_cp10_id(struct kvm_vcpu *vcpu, struct kvm_run *run) { kvm_inject_undefined(vcpu); @@ -682,17 +707,23 @@ static struct coproc_reg invariant_cp15[] = { { CRn( 0), CRm( 0), Op1( 1), Op2( 7), is32, NULL, get_AIDR }, }; +/* + * Reads a register value from a userspace address to a kernel + * variable. Make sure that register size matches sizeof(*__val). + */ static int reg_from_user(void *val, const void __user *uaddr, u64 id) { - /* This Just Works because we are little endian. */ if (copy_from_user(val, uaddr, KVM_REG_SIZE(id)) != 0) return -EFAULT; return 0; } +/* + * Writes a register value to a userspace address from a kernel variable. + * Make sure that register size matches sizeof(*__val). + */ static int reg_to_user(void __user *uaddr, const void *val, u64 id) { - /* This Just Works because we are little endian. */ if (copy_to_user(uaddr, val, KVM_REG_SIZE(id)) != 0) return -EFAULT; return 0; @@ -702,6 +733,7 @@ static int get_invariant_cp15(u64 id, void __user *uaddr) { struct coproc_params params; const struct coproc_reg *r; + int ret; if (!index_to_params(id, ¶ms)) return -ENOENT; @@ -710,7 +742,15 @@ static int get_invariant_cp15(u64 id, void __user *uaddr) if (!r) return -ENOENT; - return reg_to_user(uaddr, &r->val, id); + ret = -ENOENT; + if (KVM_REG_SIZE(id) == 4) { + u32 val = r->val; + + ret = reg_to_user(uaddr, &val, id); + } else if (KVM_REG_SIZE(id) == 8) { + ret = reg_to_user(uaddr, &r->val, id); + } + return ret; } static int set_invariant_cp15(u64 id, void __user *uaddr) @@ -718,7 +758,7 @@ static int set_invariant_cp15(u64 id, void __user *uaddr) struct coproc_params params; const struct coproc_reg *r; int err; - u64 val = 0; /* Make sure high bits are 0 for 32-bit regs */ + u64 val; if (!index_to_params(id, ¶ms)) return -ENOENT; @@ -726,7 +766,16 @@ static int set_invariant_cp15(u64 id, void __user *uaddr) if (!r) return -ENOENT; - err = reg_from_user(&val, uaddr, id); + err = -ENOENT; + if (KVM_REG_SIZE(id) == 4) { + u32 val32; + + err = reg_from_user(&val32, uaddr, id); + if (!err) + val = val32; + } else if (KVM_REG_SIZE(id) == 8) { + err = reg_from_user(&val, uaddr, id); + } if (err) return err; @@ -1004,6 +1053,7 @@ int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { const struct coproc_reg *r; void __user *uaddr = (void __user *)(long)reg->addr; + int ret; if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX) return demux_c15_get(reg->id, uaddr); @@ -1015,14 +1065,24 @@ int kvm_arm_coproc_get_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) if (!r) return get_invariant_cp15(reg->id, uaddr); - /* Note: copies two regs if size is 64 bit. */ - return reg_to_user(uaddr, &vcpu->arch.cp15[r->reg], reg->id); + ret = -ENOENT; + if (KVM_REG_SIZE(reg->id) == 8) { + u64 val; + + val = vcpu_cp15_reg64_get(vcpu, r); + ret = reg_to_user(uaddr, &val, reg->id); + } else if (KVM_REG_SIZE(reg->id) == 4) { + ret = reg_to_user(uaddr, &vcpu->arch.cp15[r->reg], reg->id); + } + + return ret; } int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) { const struct coproc_reg *r; void __user *uaddr = (void __user *)(long)reg->addr; + int ret; if ((reg->id & KVM_REG_ARM_COPROC_MASK) == KVM_REG_ARM_DEMUX) return demux_c15_set(reg->id, uaddr); @@ -1034,8 +1094,18 @@ int kvm_arm_coproc_set_reg(struct kvm_vcpu *vcpu, const struct kvm_one_reg *reg) if (!r) return set_invariant_cp15(reg->id, uaddr); - /* Note: copies two regs if size is 64 bit */ - return reg_from_user(&vcpu->arch.cp15[r->reg], uaddr, reg->id); + ret = -ENOENT; + if (KVM_REG_SIZE(reg->id) == 8) { + u64 val; + + ret = reg_from_user(&val, uaddr, reg->id); + if (!ret) + vcpu_cp15_reg64_set(vcpu, r, val); + } else if (KVM_REG_SIZE(reg->id) == 4) { + ret = reg_from_user(&vcpu->arch.cp15[r->reg], uaddr, reg->id); + } + + return ret; } static unsigned int num_demux_regs(void) diff --git a/arch/arm/kvm/guest.c b/arch/arm/kvm/guest.c index b23a59c1c52255cc808d4fbaff6ffb3be2a5abb7..813e492586909e006ccdcb1f3dc752729cc322ef 100644 --- a/arch/arm/kvm/guest.c +++ b/arch/arm/kvm/guest.c @@ -124,16 +124,6 @@ static bool is_timer_reg(u64 index) return false; } -int kvm_arm_timer_set_reg(struct kvm_vcpu *vcpu, u64 regid, u64 value) -{ - return 0; -} - -u64 kvm_arm_timer_get_reg(struct kvm_vcpu *vcpu, u64 regid) -{ - return 0; -} - #else #define NUM_TIMER_REGS 3 @@ -274,13 +264,7 @@ int kvm_arch_vcpu_ioctl_set_sregs(struct kvm_vcpu *vcpu, int __attribute_const__ kvm_target_cpu(void) { - unsigned long implementor = read_cpuid_implementor(); - unsigned long part_number = read_cpuid_part_number(); - - if (implementor != ARM_CPU_IMP_ARM) - return -EINVAL; - - switch (part_number) { + switch (read_cpuid_part()) { case ARM_CPU_PART_CORTEX_A7: return KVM_ARM_TARGET_CORTEX_A7; case ARM_CPU_PART_CORTEX_A15: diff --git a/arch/arm/kvm/init.S b/arch/arm/kvm/init.S index 1b9844d369cc08e6e1a88fc60b6f3fd6db0b6965..991415d978b6020a958ac44a886103ee83aa764c 100644 --- a/arch/arm/kvm/init.S +++ b/arch/arm/kvm/init.S @@ -17,6 +17,7 @@ */ #include +#include #include #include #include @@ -71,7 +72,7 @@ __do_hyp_init: bne phase2 @ Yes, second stage init @ Set the HTTBR to point to the hypervisor PGD pointer passed - mcrr p15, 4, r2, r3, c2 + mcrr p15, 4, rr_lo_hi(r2, r3), c2 @ Set the HTCR and VTCR to the same shareability and cacheability @ settings as the non-secure TTBCR and with T0SZ == 0. @@ -134,10 +135,10 @@ phase2: ldr r0, =TRAMPOLINE_VA adr r1, target bfi r0, r1, #0, #PAGE_SHIFT - mov pc, r0 + ret r0 target: @ We're now in the trampoline code, switch page tables - mcrr p15, 4, r2, r3, c2 + mcrr p15, 4, rr_lo_hi(r2, r3), c2 isb @ Invalidate the old TLBs diff --git a/arch/arm/kvm/interrupts.S b/arch/arm/kvm/interrupts.S index 0d68d4073068e8ad665840b8f51319e9b2bdbd89..01dcb0e752d9f04cbb1492378cc6382397c9c8e8 100644 --- a/arch/arm/kvm/interrupts.S +++ b/arch/arm/kvm/interrupts.S @@ -52,7 +52,7 @@ ENTRY(__kvm_tlb_flush_vmid_ipa) dsb ishst add r0, r0, #KVM_VTTBR ldrd r2, r3, [r0] - mcrr p15, 6, r2, r3, c2 @ Write VTTBR + mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR isb mcr p15, 0, r0, c8, c3, 0 @ TLBIALLIS (rt ignored) dsb ish @@ -135,7 +135,7 @@ ENTRY(__kvm_vcpu_run) ldr r1, [vcpu, #VCPU_KVM] add r1, r1, #KVM_VTTBR ldrd r2, r3, [r1] - mcrr p15, 6, r2, r3, c2 @ Write VTTBR + mcrr p15, 6, rr_lo_hi(r2, r3), c2 @ Write VTTBR @ We're all done, just restore the GPRs and go to the guest restore_guest_regs @@ -199,8 +199,13 @@ after_vfp_restore: restore_host_regs clrex @ Clear exclusive monitor +#ifndef CONFIG_CPU_ENDIAN_BE8 mov r0, r1 @ Return the return code mov r1, #0 @ Clear upper bits in return value +#else + @ r1 already has return code + mov r0, #0 @ Clear upper bits in return value +#endif /* CONFIG_CPU_ENDIAN_BE8 */ bx lr @ return to IOCTL /******************************************************************** diff --git a/arch/arm/kvm/interrupts_head.S b/arch/arm/kvm/interrupts_head.S index 76af930255743724c0dd6cf26882968adcfbd959..98c8c5b9a87f392a0410a1ca51481e93172bad8f 100644 --- a/arch/arm/kvm/interrupts_head.S +++ b/arch/arm/kvm/interrupts_head.S @@ -1,4 +1,5 @@ #include +#include #define VCPU_USR_REG(_reg_nr) (VCPU_USR_REGS + (_reg_nr * 4)) #define VCPU_USR_SP (VCPU_USR_REG(13)) @@ -420,15 +421,23 @@ vcpu .req r0 @ vcpu pointer always in r0 ldr r8, [r2, #GICH_ELRSR0] ldr r9, [r2, #GICH_ELRSR1] ldr r10, [r2, #GICH_APR] - - str r3, [r11, #VGIC_CPU_HCR] - str r4, [r11, #VGIC_CPU_VMCR] - str r5, [r11, #VGIC_CPU_MISR] - str r6, [r11, #VGIC_CPU_EISR] - str r7, [r11, #(VGIC_CPU_EISR + 4)] - str r8, [r11, #VGIC_CPU_ELRSR] - str r9, [r11, #(VGIC_CPU_ELRSR + 4)] - str r10, [r11, #VGIC_CPU_APR] +ARM_BE8(rev r3, r3 ) +ARM_BE8(rev r4, r4 ) +ARM_BE8(rev r5, r5 ) +ARM_BE8(rev r6, r6 ) +ARM_BE8(rev r7, r7 ) +ARM_BE8(rev r8, r8 ) +ARM_BE8(rev r9, r9 ) +ARM_BE8(rev r10, r10 ) + + str r3, [r11, #VGIC_V2_CPU_HCR] + str r4, [r11, #VGIC_V2_CPU_VMCR] + str r5, [r11, #VGIC_V2_CPU_MISR] + str r6, [r11, #VGIC_V2_CPU_EISR] + str r7, [r11, #(VGIC_V2_CPU_EISR + 4)] + str r8, [r11, #VGIC_V2_CPU_ELRSR] + str r9, [r11, #(VGIC_V2_CPU_ELRSR + 4)] + str r10, [r11, #VGIC_V2_CPU_APR] /* Clear GICH_HCR */ mov r5, #0 @@ -436,9 +445,10 @@ vcpu .req r0 @ vcpu pointer always in r0 /* Save list registers */ add r2, r2, #GICH_LR0 - add r3, r11, #VGIC_CPU_LR + add r3, r11, #VGIC_V2_CPU_LR ldr r4, [r11, #VGIC_CPU_NR_LR] 1: ldr r6, [r2], #4 +ARM_BE8(rev r6, r6 ) str r6, [r3], #4 subs r4, r4, #1 bne 1b @@ -463,9 +473,12 @@ vcpu .req r0 @ vcpu pointer always in r0 add r11, vcpu, #VCPU_VGIC_CPU /* We only restore a minimal set of registers */ - ldr r3, [r11, #VGIC_CPU_HCR] - ldr r4, [r11, #VGIC_CPU_VMCR] - ldr r8, [r11, #VGIC_CPU_APR] + ldr r3, [r11, #VGIC_V2_CPU_HCR] + ldr r4, [r11, #VGIC_V2_CPU_VMCR] + ldr r8, [r11, #VGIC_V2_CPU_APR] +ARM_BE8(rev r3, r3 ) +ARM_BE8(rev r4, r4 ) +ARM_BE8(rev r8, r8 ) str r3, [r2, #GICH_HCR] str r4, [r2, #GICH_VMCR] @@ -473,9 +486,10 @@ vcpu .req r0 @ vcpu pointer always in r0 /* Restore list registers */ add r2, r2, #GICH_LR0 - add r3, r11, #VGIC_CPU_LR + add r3, r11, #VGIC_V2_CPU_LR ldr r4, [r11, #VGIC_CPU_NR_LR] 1: ldr r6, [r3], #4 +ARM_BE8(rev r6, r6 ) str r6, [r2], #4 subs r4, r4, #1 bne 1b @@ -506,7 +520,7 @@ vcpu .req r0 @ vcpu pointer always in r0 mcr p15, 0, r2, c14, c3, 1 @ CNTV_CTL isb - mrrc p15, 3, r2, r3, c14 @ CNTV_CVAL + mrrc p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL ldr r4, =VCPU_TIMER_CNTV_CVAL add r5, vcpu, r4 strd r2, r3, [r5] @@ -546,12 +560,12 @@ vcpu .req r0 @ vcpu pointer always in r0 ldr r2, [r4, #KVM_TIMER_CNTVOFF] ldr r3, [r4, #(KVM_TIMER_CNTVOFF + 4)] - mcrr p15, 4, r2, r3, c14 @ CNTVOFF + mcrr p15, 4, rr_lo_hi(r2, r3), c14 @ CNTVOFF ldr r4, =VCPU_TIMER_CNTV_CVAL add r5, vcpu, r4 ldrd r2, r3, [r5] - mcrr p15, 3, r2, r3, c14 @ CNTV_CVAL + mcrr p15, 3, rr_lo_hi(r2, r3), c14 @ CNTV_CVAL isb ldr r2, [vcpu, #VCPU_TIMER_CNTV_CTL] diff --git a/arch/arm/kvm/mmu.c b/arch/arm/kvm/mmu.c index 16f804938b8fea9fee56fa93991cf8c45cf141e5..16e7994bf3473d4c6ec7c32a8571299c02ab7808 100644 --- a/arch/arm/kvm/mmu.c +++ b/arch/arm/kvm/mmu.c @@ -90,104 +90,115 @@ static void *mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc) return p; } -static bool page_empty(void *ptr) +static void clear_pgd_entry(struct kvm *kvm, pgd_t *pgd, phys_addr_t addr) { - struct page *ptr_page = virt_to_page(ptr); - return page_count(ptr_page) == 1; + pud_t *pud_table __maybe_unused = pud_offset(pgd, 0); + pgd_clear(pgd); + kvm_tlb_flush_vmid_ipa(kvm, addr); + pud_free(NULL, pud_table); + put_page(virt_to_page(pgd)); } static void clear_pud_entry(struct kvm *kvm, pud_t *pud, phys_addr_t addr) { - if (pud_huge(*pud)) { - pud_clear(pud); - kvm_tlb_flush_vmid_ipa(kvm, addr); - } else { - pmd_t *pmd_table = pmd_offset(pud, 0); - pud_clear(pud); - kvm_tlb_flush_vmid_ipa(kvm, addr); - pmd_free(NULL, pmd_table); - } + pmd_t *pmd_table = pmd_offset(pud, 0); + VM_BUG_ON(pud_huge(*pud)); + pud_clear(pud); + kvm_tlb_flush_vmid_ipa(kvm, addr); + pmd_free(NULL, pmd_table); put_page(virt_to_page(pud)); } static void clear_pmd_entry(struct kvm *kvm, pmd_t *pmd, phys_addr_t addr) { - if (kvm_pmd_huge(*pmd)) { - pmd_clear(pmd); - kvm_tlb_flush_vmid_ipa(kvm, addr); - } else { - pte_t *pte_table = pte_offset_kernel(pmd, 0); - pmd_clear(pmd); - kvm_tlb_flush_vmid_ipa(kvm, addr); - pte_free_kernel(NULL, pte_table); - } + pte_t *pte_table = pte_offset_kernel(pmd, 0); + VM_BUG_ON(kvm_pmd_huge(*pmd)); + pmd_clear(pmd); + kvm_tlb_flush_vmid_ipa(kvm, addr); + pte_free_kernel(NULL, pte_table); put_page(virt_to_page(pmd)); } -static void clear_pte_entry(struct kvm *kvm, pte_t *pte, phys_addr_t addr) +static void unmap_ptes(struct kvm *kvm, pmd_t *pmd, + phys_addr_t addr, phys_addr_t end) { - if (pte_present(*pte)) { - kvm_set_pte(pte, __pte(0)); - put_page(virt_to_page(pte)); - kvm_tlb_flush_vmid_ipa(kvm, addr); - } + phys_addr_t start_addr = addr; + pte_t *pte, *start_pte; + + start_pte = pte = pte_offset_kernel(pmd, addr); + do { + if (!pte_none(*pte)) { + kvm_set_pte(pte, __pte(0)); + put_page(virt_to_page(pte)); + kvm_tlb_flush_vmid_ipa(kvm, addr); + } + } while (pte++, addr += PAGE_SIZE, addr != end); + + if (kvm_pte_table_empty(start_pte)) + clear_pmd_entry(kvm, pmd, start_addr); } -static void unmap_range(struct kvm *kvm, pgd_t *pgdp, - unsigned long long start, u64 size) +static void unmap_pmds(struct kvm *kvm, pud_t *pud, + phys_addr_t addr, phys_addr_t end) { - pgd_t *pgd; - pud_t *pud; - pmd_t *pmd; - pte_t *pte; - unsigned long long addr = start, end = start + size; - u64 next; - - while (addr < end) { - pgd = pgdp + pgd_index(addr); - pud = pud_offset(pgd, addr); - pte = NULL; - if (pud_none(*pud)) { - addr = kvm_pud_addr_end(addr, end); - continue; - } + phys_addr_t next, start_addr = addr; + pmd_t *pmd, *start_pmd; - if (pud_huge(*pud)) { - /* - * If we are dealing with a huge pud, just clear it and - * move on. - */ - clear_pud_entry(kvm, pud, addr); - addr = kvm_pud_addr_end(addr, end); - continue; + start_pmd = pmd = pmd_offset(pud, addr); + do { + next = kvm_pmd_addr_end(addr, end); + if (!pmd_none(*pmd)) { + if (kvm_pmd_huge(*pmd)) { + pmd_clear(pmd); + kvm_tlb_flush_vmid_ipa(kvm, addr); + put_page(virt_to_page(pmd)); + } else { + unmap_ptes(kvm, pmd, addr, next); + } } + } while (pmd++, addr = next, addr != end); - pmd = pmd_offset(pud, addr); - if (pmd_none(*pmd)) { - addr = kvm_pmd_addr_end(addr, end); - continue; - } + if (kvm_pmd_table_empty(start_pmd)) + clear_pud_entry(kvm, pud, start_addr); +} - if (!kvm_pmd_huge(*pmd)) { - pte = pte_offset_kernel(pmd, addr); - clear_pte_entry(kvm, pte, addr); - next = addr + PAGE_SIZE; - } +static void unmap_puds(struct kvm *kvm, pgd_t *pgd, + phys_addr_t addr, phys_addr_t end) +{ + phys_addr_t next, start_addr = addr; + pud_t *pud, *start_pud; - /* - * If the pmd entry is to be cleared, walk back up the ladder - */ - if (kvm_pmd_huge(*pmd) || (pte && page_empty(pte))) { - clear_pmd_entry(kvm, pmd, addr); - next = kvm_pmd_addr_end(addr, end); - if (page_empty(pmd) && !page_empty(pud)) { - clear_pud_entry(kvm, pud, addr); - next = kvm_pud_addr_end(addr, end); + start_pud = pud = pud_offset(pgd, addr); + do { + next = kvm_pud_addr_end(addr, end); + if (!pud_none(*pud)) { + if (pud_huge(*pud)) { + pud_clear(pud); + kvm_tlb_flush_vmid_ipa(kvm, addr); + put_page(virt_to_page(pud)); + } else { + unmap_pmds(kvm, pud, addr, next); } } + } while (pud++, addr = next, addr != end); - addr = next; - } + if (kvm_pud_table_empty(start_pud)) + clear_pgd_entry(kvm, pgd, start_addr); +} + + +static void unmap_range(struct kvm *kvm, pgd_t *pgdp, + phys_addr_t start, u64 size) +{ + pgd_t *pgd; + phys_addr_t addr = start, end = start + size; + phys_addr_t next; + + pgd = pgdp + pgd_index(addr); + do { + next = kvm_pgd_addr_end(addr, end); + unmap_puds(kvm, pgd, addr, next); + } while (pgd++, addr = next, addr != end); } static void stage2_flush_ptes(struct kvm *kvm, pmd_t *pmd, @@ -748,6 +759,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, struct kvm_mmu_memory_cache *memcache = &vcpu->arch.mmu_page_cache; struct vm_area_struct *vma; pfn_t pfn; + pgprot_t mem_type = PAGE_S2; write_fault = kvm_is_write_fault(kvm_vcpu_get_hsr(vcpu)); if (fault_status == FSC_PERM && !write_fault) { @@ -798,6 +810,9 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, if (is_error_pfn(pfn)) return -EFAULT; + if (kvm_is_mmio_pfn(pfn)) + mem_type = PAGE_S2_DEVICE; + spin_lock(&kvm->mmu_lock); if (mmu_notifier_retry(kvm, mmu_seq)) goto out_unlock; @@ -805,7 +820,7 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, hugetlb = transparent_hugepage_adjust(&pfn, &fault_ipa); if (hugetlb) { - pmd_t new_pmd = pfn_pmd(pfn, PAGE_S2); + pmd_t new_pmd = pfn_pmd(pfn, mem_type); new_pmd = pmd_mkhuge(new_pmd); if (writable) { kvm_set_s2pmd_writable(&new_pmd); @@ -814,13 +829,14 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa, coherent_cache_guest_page(vcpu, hva & PMD_MASK, PMD_SIZE); ret = stage2_set_pmd_huge(kvm, memcache, fault_ipa, &new_pmd); } else { - pte_t new_pte = pfn_pte(pfn, PAGE_S2); + pte_t new_pte = pfn_pte(pfn, mem_type); if (writable) { kvm_set_s2pte_writable(&new_pte); kvm_set_pfn_dirty(pfn); } coherent_cache_guest_page(vcpu, hva, PAGE_SIZE); - ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, false); + ret = stage2_set_pte(kvm, memcache, fault_ipa, &new_pte, + mem_type == PAGE_S2_DEVICE); } @@ -1100,3 +1116,49 @@ int kvm_mmu_init(void) free_hyp_pgds(); return err; } + +void kvm_arch_commit_memory_region(struct kvm *kvm, + struct kvm_userspace_memory_region *mem, + const struct kvm_memory_slot *old, + enum kvm_mr_change change) +{ + gpa_t gpa = old->base_gfn << PAGE_SHIFT; + phys_addr_t size = old->npages << PAGE_SHIFT; + if (change == KVM_MR_DELETE || change == KVM_MR_MOVE) { + spin_lock(&kvm->mmu_lock); + unmap_stage2_range(kvm, gpa, size); + spin_unlock(&kvm->mmu_lock); + } +} + +int kvm_arch_prepare_memory_region(struct kvm *kvm, + struct kvm_memory_slot *memslot, + struct kvm_userspace_memory_region *mem, + enum kvm_mr_change change) +{ + return 0; +} + +void kvm_arch_free_memslot(struct kvm *kvm, struct kvm_memory_slot *free, + struct kvm_memory_slot *dont) +{ +} + +int kvm_arch_create_memslot(struct kvm *kvm, struct kvm_memory_slot *slot, + unsigned long npages) +{ + return 0; +} + +void kvm_arch_memslots_updated(struct kvm *kvm) +{ +} + +void kvm_arch_flush_shadow_all(struct kvm *kvm) +{ +} + +void kvm_arch_flush_shadow_memslot(struct kvm *kvm, + struct kvm_memory_slot *slot) +{ +} diff --git a/arch/arm/lib/ashldi3.S b/arch/arm/lib/ashldi3.S index 638deb13da1c3d35e5f1bec6c7cb11cf5a2cae51..b05e95840651d0f5acc653a1efaeecd5c85b18fe 100644 --- a/arch/arm/lib/ashldi3.S +++ b/arch/arm/lib/ashldi3.S @@ -27,6 +27,7 @@ Boston, MA 02110-1301, USA. */ #include +#include #ifdef __ARMEB__ #define al r1 @@ -47,7 +48,7 @@ ENTRY(__aeabi_llsl) THUMB( lsrmi r3, al, ip ) THUMB( orrmi ah, ah, r3 ) mov al, al, lsl r2 - mov pc, lr + ret lr ENDPROC(__ashldi3) ENDPROC(__aeabi_llsl) diff --git a/arch/arm/lib/ashrdi3.S b/arch/arm/lib/ashrdi3.S index 015e8aa5a1d1ef97f5c5fb8ba44be44bdfe1365f..275d7d2341a4e52e31e19924ebde00aaa771a49c 100644 --- a/arch/arm/lib/ashrdi3.S +++ b/arch/arm/lib/ashrdi3.S @@ -27,6 +27,7 @@ Boston, MA 02110-1301, USA. */ #include +#include #ifdef __ARMEB__ #define al r1 @@ -47,7 +48,7 @@ ENTRY(__aeabi_lasr) THUMB( lslmi r3, ah, ip ) THUMB( orrmi al, al, r3 ) mov ah, ah, asr r2 - mov pc, lr + ret lr ENDPROC(__ashrdi3) ENDPROC(__aeabi_lasr) diff --git a/arch/arm/lib/backtrace.S b/arch/arm/lib/backtrace.S index 4102be617fce0644434e3aa7f7fec65c09fcb5e7..fab5a50503aedab7b4d875ff6acc1879ad3eeaa0 100644 --- a/arch/arm/lib/backtrace.S +++ b/arch/arm/lib/backtrace.S @@ -25,7 +25,7 @@ ENTRY(c_backtrace) #if !defined(CONFIG_FRAME_POINTER) || !defined(CONFIG_PRINTK) - mov pc, lr + ret lr ENDPROC(c_backtrace) #else stmfd sp!, {r4 - r8, lr} @ Save an extra register so we have a location... diff --git a/arch/arm/lib/bitops.h b/arch/arm/lib/bitops.h index 9f12ed1eea860fccf4b6c301277827cb376c2c41..7d807cfd8ef57ed2bdde29d98ddb6a7094f725f7 100644 --- a/arch/arm/lib/bitops.h +++ b/arch/arm/lib/bitops.h @@ -1,3 +1,4 @@ +#include #include #if __LINUX_ARM_ARCH__ >= 6 @@ -70,7 +71,7 @@ UNWIND( .fnstart ) \instr r2, r2, r3 str r2, [r1, r0, lsl #2] restore_irqs ip - mov pc, lr + ret lr UNWIND( .fnend ) ENDPROC(\name ) .endm @@ -98,7 +99,7 @@ UNWIND( .fnstart ) \store r2, [r1] moveq r0, #0 restore_irqs ip - mov pc, lr + ret lr UNWIND( .fnend ) ENDPROC(\name ) .endm diff --git a/arch/arm/lib/bswapsdi2.S b/arch/arm/lib/bswapsdi2.S index 9fcdd154eff9d4e0388b1cede18bc5e9fc5d4438..07cda737bb11f14ed1c873e7e2c5b97c2da2543e 100644 --- a/arch/arm/lib/bswapsdi2.S +++ b/arch/arm/lib/bswapsdi2.S @@ -1,4 +1,5 @@ #include +#include #if __LINUX_ARM_ARCH__ >= 6 ENTRY(__bswapsi2) @@ -18,7 +19,7 @@ ENTRY(__bswapsi2) mov r3, r3, lsr #8 bic r3, r3, #0xff00 eor r0, r3, r0, ror #8 - mov pc, lr + ret lr ENDPROC(__bswapsi2) ENTRY(__bswapdi2) @@ -31,6 +32,6 @@ ENTRY(__bswapdi2) bic r1, r1, #0xff00 eor r1, r1, r0, ror #8 eor r0, r3, ip, ror #8 - mov pc, lr + ret lr ENDPROC(__bswapdi2) #endif diff --git a/arch/arm/lib/call_with_stack.S b/arch/arm/lib/call_with_stack.S index 916c80f13ae75b5148e49139711e734bad68f471..ed1a421813cba8c4f0b83047e7457983a4faae31 100644 --- a/arch/arm/lib/call_with_stack.S +++ b/arch/arm/lib/call_with_stack.S @@ -36,9 +36,9 @@ ENTRY(call_with_stack) mov r0, r1 adr lr, BSYM(1f) - mov pc, r2 + ret r2 1: ldr lr, [sp] ldr sp, [sp, #4] - mov pc, lr + ret lr ENDPROC(call_with_stack) diff --git a/arch/arm/lib/csumpartial.S b/arch/arm/lib/csumpartial.S index 31d3cb34740d6a135506a723980be083f103dbc7..984e0f29d548b456884e643d9f9337e4cd42fc31 100644 --- a/arch/arm/lib/csumpartial.S +++ b/arch/arm/lib/csumpartial.S @@ -97,7 +97,7 @@ td3 .req lr #endif #endif adcnes sum, sum, td0 @ update checksum - mov pc, lr + ret lr ENTRY(csum_partial) stmfd sp!, {buf, lr} diff --git a/arch/arm/lib/csumpartialcopygeneric.S b/arch/arm/lib/csumpartialcopygeneric.S index d6e742d240075a05c35902d21f86979b054fb928..10b45909610ca6f4ca6f6f8bdc664b79c2f2bd6f 100644 --- a/arch/arm/lib/csumpartialcopygeneric.S +++ b/arch/arm/lib/csumpartialcopygeneric.S @@ -7,6 +7,7 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ +#include /* * unsigned int @@ -40,7 +41,7 @@ sum .req r3 adcs sum, sum, ip, put_byte_1 @ update checksum strb ip, [dst], #1 tst dst, #2 - moveq pc, lr @ dst is now 32bit aligned + reteq lr @ dst is now 32bit aligned .Ldst_16bit: load2b r8, ip sub len, len, #2 @@ -48,7 +49,7 @@ sum .req r3 strb r8, [dst], #1 adcs sum, sum, ip, put_byte_1 strb ip, [dst], #1 - mov pc, lr @ dst is now 32bit aligned + ret lr @ dst is now 32bit aligned /* * Handle 0 to 7 bytes, with any alignment of source and diff --git a/arch/arm/lib/delay-loop.S b/arch/arm/lib/delay-loop.S index bc1033b897b44510b16a8ab202f0c1b989cc15e5..518bf6e93f78a2cb1c74f7b857c6fa96b1018f53 100644 --- a/arch/arm/lib/delay-loop.S +++ b/arch/arm/lib/delay-loop.S @@ -35,7 +35,7 @@ ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06 mul r0, r2, r0 @ max = 2^32-1 add r0, r0, r1, lsr #32-6 movs r0, r0, lsr #6 - moveq pc, lr + reteq lr /* * loops = r0 * HZ * loops_per_jiffy / 1000000 @@ -46,23 +46,23 @@ ENTRY(__loop_const_udelay) @ 0 <= r0 <= 0x7fffff06 ENTRY(__loop_delay) subs r0, r0, #1 #if 0 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 - movls pc, lr + retls lr subs r0, r0, #1 #endif bhi __loop_delay - mov pc, lr + ret lr ENDPROC(__loop_udelay) ENDPROC(__loop_const_udelay) ENDPROC(__loop_delay) diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 5306de35013397994ec6873f2a713af5d47867a4..312d43eb686a0254543258efdc3185c340bde82c 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -19,6 +19,7 @@ * Author: Will Deacon */ +#include #include #include #include @@ -36,6 +37,7 @@ struct arm_delay_ops arm_delay_ops = { static const struct delay_timer *delay_timer; static bool delay_calibrated; +static u64 delay_res; int read_current_timer(unsigned long *timer_val) { @@ -47,6 +49,11 @@ int read_current_timer(unsigned long *timer_val) } EXPORT_SYMBOL_GPL(read_current_timer); +static inline u64 cyc_to_ns(u64 cyc, u32 mult, u32 shift) +{ + return (cyc * mult) >> shift; +} + static void __timer_delay(unsigned long cycles) { cycles_t start = get_cycles(); @@ -69,18 +76,24 @@ static void __timer_udelay(unsigned long usecs) void __init register_current_timer_delay(const struct delay_timer *timer) { - if (!delay_calibrated) { - pr_info("Switching to timer-based delay loop\n"); + u32 new_mult, new_shift; + u64 res; + + clocks_calc_mult_shift(&new_mult, &new_shift, timer->freq, + NSEC_PER_SEC, 3600); + res = cyc_to_ns(1ULL, new_mult, new_shift); + + if (!delay_calibrated && (!delay_res || (res < delay_res))) { + pr_info("Switching to timer-based delay loop, resolution %lluns\n", res); delay_timer = timer; lpj_fine = timer->freq / HZ; + delay_res = res; /* cpufreq may scale loops_per_jiffy, so keep a private copy */ arm_delay_ops.ticks_per_jiffy = lpj_fine; arm_delay_ops.delay = __timer_delay; arm_delay_ops.const_udelay = __timer_const_udelay; arm_delay_ops.udelay = __timer_udelay; - - delay_calibrated = true; } else { pr_info("Ignoring duplicate/late registration of read_current_timer delay\n"); } @@ -91,3 +104,8 @@ unsigned long calibrate_delay_is_known(void) delay_calibrated = true; return lpj_fine; } + +void calibration_delay_done(void) +{ + delay_calibrated = true; +} diff --git a/arch/arm/lib/div64.S b/arch/arm/lib/div64.S index e55c4842c290fa6267e9998eb9dc4bd28f8cfcef..a9eafe4981eb847e2f07e0e245aa8e1f1747fa59 100644 --- a/arch/arm/lib/div64.S +++ b/arch/arm/lib/div64.S @@ -13,6 +13,7 @@ */ #include +#include #include #ifdef __ARMEB__ @@ -97,7 +98,7 @@ UNWIND(.fnstart) mov yl, #0 cmpeq xl, r4 movlo xh, xl - movlo pc, lr + retlo lr @ The division loop for lower bit positions. @ Here we shift remainer bits leftwards rather than moving the @@ -111,14 +112,14 @@ UNWIND(.fnstart) subcs xh, xh, r4 movs ip, ip, lsr #1 bne 4b - mov pc, lr + ret lr @ The top part of remainder became zero. If carry is set @ (the 33th bit) this is a false positive so resume the loop. @ Otherwise, if lower part is also null then we are done. 6: bcs 5b cmp xl, #0 - moveq pc, lr + reteq lr @ We still have remainer bits in the low part. Bring them up. @@ -144,7 +145,7 @@ UNWIND(.fnstart) movs ip, ip, lsr #1 mov xh, #1 bne 4b - mov pc, lr + ret lr 8: @ Division by a power of 2: determine what that divisor order is @ then simply shift values around @@ -184,13 +185,13 @@ UNWIND(.fnstart) THUMB( orr yl, yl, xh ) mov xh, xl, lsl ip mov xh, xh, lsr ip - mov pc, lr + ret lr @ eq -> division by 1: obvious enough... 9: moveq yl, xl moveq yh, xh moveq xh, #0 - moveq pc, lr + reteq lr UNWIND(.fnend) UNWIND(.fnstart) diff --git a/arch/arm/lib/findbit.S b/arch/arm/lib/findbit.S index 64f6bc1a91326c79800bbb9205645a7d0e7e5e0c..7848780e883473ac21d97ed54b99ec3788672980 100644 --- a/arch/arm/lib/findbit.S +++ b/arch/arm/lib/findbit.S @@ -35,7 +35,7 @@ ENTRY(_find_first_zero_bit_le) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - mov pc, lr + ret lr ENDPROC(_find_first_zero_bit_le) /* @@ -76,7 +76,7 @@ ENTRY(_find_first_bit_le) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - mov pc, lr + ret lr ENDPROC(_find_first_bit_le) /* @@ -114,7 +114,7 @@ ENTRY(_find_first_zero_bit_be) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - mov pc, lr + ret lr ENDPROC(_find_first_zero_bit_be) ENTRY(_find_next_zero_bit_be) @@ -148,7 +148,7 @@ ENTRY(_find_first_bit_be) 2: cmp r2, r1 @ any more? blo 1b 3: mov r0, r1 @ no free bits - mov pc, lr + ret lr ENDPROC(_find_first_bit_be) ENTRY(_find_next_bit_be) @@ -192,5 +192,5 @@ ENDPROC(_find_next_bit_be) #endif cmp r1, r0 @ Clamp to maxbit movlo r0, r1 - mov pc, lr + ret lr diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 9b06bb41fca659b9bbfc2f996e703ce2b8c315aa..938600098b88690507ef22489e3a3d0dbc3cc401 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -18,7 +18,7 @@ * Inputs: r0 contains the address * r1 contains the address limit, which must be preserved * Outputs: r0 is the error code - * r2 contains the zero-extended value + * r2, r3 contains the zero-extended value * lr corrupted * * No other registers must be altered. (see @@ -36,7 +36,7 @@ ENTRY(__get_user_1) check_uaccess r0, 1, r1, r2, __get_user_bad 1: TUSER(ldrb) r2, [r0] mov r0, #0 - mov pc, lr + ret lr ENDPROC(__get_user_1) ENTRY(__get_user_2) @@ -56,25 +56,60 @@ rb .req r0 orr r2, rb, r2, lsl #8 #endif mov r0, #0 - mov pc, lr + ret lr ENDPROC(__get_user_2) ENTRY(__get_user_4) check_uaccess r0, 4, r1, r2, __get_user_bad 4: TUSER(ldr) r2, [r0] mov r0, #0 - mov pc, lr + ret lr ENDPROC(__get_user_4) +ENTRY(__get_user_8) + check_uaccess r0, 8, r1, r2, __get_user_bad +#ifdef CONFIG_THUMB2_KERNEL +5: TUSER(ldr) r2, [r0] +6: TUSER(ldr) r3, [r0, #4] +#else +5: TUSER(ldr) r2, [r0], #4 +6: TUSER(ldr) r3, [r0] +#endif + mov r0, #0 + ret lr +ENDPROC(__get_user_8) + +#ifdef __ARMEB__ +ENTRY(__get_user_lo8) + check_uaccess r0, 8, r1, r2, __get_user_bad +#ifdef CONFIG_CPU_USE_DOMAINS + add r0, r0, #4 +7: ldrt r2, [r0] +#else +7: ldr r2, [r0, #4] +#endif + mov r0, #0 + ret lr +ENDPROC(__get_user_lo8) +#endif + +__get_user_bad8: + mov r3, #0 __get_user_bad: mov r2, #0 mov r0, #-EFAULT - mov pc, lr + ret lr ENDPROC(__get_user_bad) +ENDPROC(__get_user_bad8) .pushsection __ex_table, "a" .long 1b, __get_user_bad .long 2b, __get_user_bad .long 3b, __get_user_bad .long 4b, __get_user_bad + .long 5b, __get_user_bad8 + .long 6b, __get_user_bad8 +#ifdef __ARMEB__ + .long 7b, __get_user_bad +#endif .popsection diff --git a/arch/arm/lib/io-readsb.S b/arch/arm/lib/io-readsb.S index 9f4238987fe9050dba88c94c4c0eb4b730c62c6d..c31b2f3153f171fd09602aed2ea9cb8c97797f4d 100644 --- a/arch/arm/lib/io-readsb.S +++ b/arch/arm/lib/io-readsb.S @@ -25,7 +25,7 @@ ENTRY(__raw_readsb) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr ands ip, r1, #3 bne .Linsb_align diff --git a/arch/arm/lib/io-readsl.S b/arch/arm/lib/io-readsl.S index 7a7430950c7974621eccc31e65e08294a1492d1e..2ed86fa5465f70cdcb92a46a167d9aa81edad68f 100644 --- a/arch/arm/lib/io-readsl.S +++ b/arch/arm/lib/io-readsl.S @@ -12,7 +12,7 @@ ENTRY(__raw_readsl) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr ands ip, r1, #3 bne 3f @@ -33,7 +33,7 @@ ENTRY(__raw_readsl) stmcsia r1!, {r3, ip} ldrne r3, [r0, #0] strne r3, [r1, #0] - mov pc, lr + ret lr 3: ldr r3, [r0] cmp ip, #2 @@ -75,5 +75,5 @@ ENTRY(__raw_readsl) strb r3, [r1, #1] 8: mov r3, ip, get_byte_0 strb r3, [r1, #0] - mov pc, lr + ret lr ENDPROC(__raw_readsl) diff --git a/arch/arm/lib/io-readsw-armv3.S b/arch/arm/lib/io-readsw-armv3.S index 88487c8c4f2353f7f512bd6dbecb019e93e72004..413da99145292f3e535b618fee2a5c9c96e114b4 100644 --- a/arch/arm/lib/io-readsw-armv3.S +++ b/arch/arm/lib/io-readsw-armv3.S @@ -27,11 +27,11 @@ strb r3, [r1], #1 subs r2, r2, #1 - moveq pc, lr + reteq lr ENTRY(__raw_readsw) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr tst r1, #3 bne .Linsw_align diff --git a/arch/arm/lib/io-readsw-armv4.S b/arch/arm/lib/io-readsw-armv4.S index 1f393d42593d21c1beb13eff254acd60eaa0bd95..d9a45e9692aee3ad1de5dea37653a65cd8c18da4 100644 --- a/arch/arm/lib/io-readsw-armv4.S +++ b/arch/arm/lib/io-readsw-armv4.S @@ -26,7 +26,7 @@ ENTRY(__raw_readsw) teq r2, #0 - moveq pc, lr + reteq lr tst r1, #3 bne .Linsw_align diff --git a/arch/arm/lib/io-writesb.S b/arch/arm/lib/io-writesb.S index 68b92f4acaeb3e6f2dbfce4285a8cc9a91deac10..a46bbc9b168b45f7016096244eb4933a911d4ac0 100644 --- a/arch/arm/lib/io-writesb.S +++ b/arch/arm/lib/io-writesb.S @@ -45,7 +45,7 @@ ENTRY(__raw_writesb) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr ands ip, r1, #3 bne .Loutsb_align diff --git a/arch/arm/lib/io-writesl.S b/arch/arm/lib/io-writesl.S index d0d104a0dd116890db92e91e75bd6ef32a2d00e9..4ea2435988c1f75d8fddac8ac63a499067d02cae 100644 --- a/arch/arm/lib/io-writesl.S +++ b/arch/arm/lib/io-writesl.S @@ -12,7 +12,7 @@ ENTRY(__raw_writesl) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr ands ip, r1, #3 bne 3f @@ -33,7 +33,7 @@ ENTRY(__raw_writesl) ldrne r3, [r1, #0] strcs ip, [r0, #0] strne r3, [r0, #0] - mov pc, lr + ret lr 3: bic r1, r1, #3 ldr r3, [r1], #4 @@ -47,7 +47,7 @@ ENTRY(__raw_writesl) orr ip, ip, r3, lspush #16 str ip, [r0] bne 4b - mov pc, lr + ret lr 5: mov ip, r3, lspull #8 ldr r3, [r1], #4 @@ -55,7 +55,7 @@ ENTRY(__raw_writesl) orr ip, ip, r3, lspush #24 str ip, [r0] bne 5b - mov pc, lr + ret lr 6: mov ip, r3, lspull #24 ldr r3, [r1], #4 @@ -63,5 +63,5 @@ ENTRY(__raw_writesl) orr ip, ip, r3, lspush #8 str ip, [r0] bne 6b - mov pc, lr + ret lr ENDPROC(__raw_writesl) diff --git a/arch/arm/lib/io-writesw-armv3.S b/arch/arm/lib/io-writesw-armv3.S index 49b800419e32ca6b6dbed9c27d0ee4e3960b639b..121789eb680235f9dad2c8f1492960d2f26fded1 100644 --- a/arch/arm/lib/io-writesw-armv3.S +++ b/arch/arm/lib/io-writesw-armv3.S @@ -28,11 +28,11 @@ orr r3, r3, r3, lsl #16 str r3, [r0] subs r2, r2, #1 - moveq pc, lr + reteq lr ENTRY(__raw_writesw) teq r2, #0 @ do we have to check for the zero len? - moveq pc, lr + reteq lr tst r1, #3 bne .Loutsw_align diff --git a/arch/arm/lib/io-writesw-armv4.S b/arch/arm/lib/io-writesw-armv4.S index ff4f71b579eeb454a3bba5b01120c0ee06ae3f47..269f90c51ad279c63bf4dd9f8bfed8c6827a75d2 100644 --- a/arch/arm/lib/io-writesw-armv4.S +++ b/arch/arm/lib/io-writesw-armv4.S @@ -31,7 +31,7 @@ ENTRY(__raw_writesw) teq r2, #0 - moveq pc, lr + reteq lr ands r3, r1, #3 bne .Loutsw_align @@ -96,5 +96,5 @@ ENTRY(__raw_writesw) tst r2, #1 3: movne ip, r3, lsr #8 strneh ip, [r0] - mov pc, lr + ret lr ENDPROC(__raw_writesw) diff --git a/arch/arm/lib/lib1funcs.S b/arch/arm/lib/lib1funcs.S index c562f649734cea40f813c3d6c50b9cffcd619ae9..947567ff67f922dbf33c2c8db014758ced45b2f0 100644 --- a/arch/arm/lib/lib1funcs.S +++ b/arch/arm/lib/lib1funcs.S @@ -210,7 +210,7 @@ ENTRY(__aeabi_uidiv) UNWIND(.fnstart) subs r2, r1, #1 - moveq pc, lr + reteq lr bcc Ldiv0 cmp r0, r1 bls 11f @@ -220,16 +220,16 @@ UNWIND(.fnstart) ARM_DIV_BODY r0, r1, r2, r3 mov r0, r2 - mov pc, lr + ret lr 11: moveq r0, #1 movne r0, #0 - mov pc, lr + ret lr 12: ARM_DIV2_ORDER r1, r2 mov r0, r0, lsr r2 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__udivsi3) @@ -244,11 +244,11 @@ UNWIND(.fnstart) moveq r0, #0 tsthi r1, r2 @ see if divisor is power of 2 andeq r0, r0, r2 - movls pc, lr + retls lr ARM_MOD_BODY r0, r1, r2, r3 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__umodsi3) @@ -274,23 +274,23 @@ UNWIND(.fnstart) cmp ip, #0 rsbmi r0, r0, #0 - mov pc, lr + ret lr 10: teq ip, r0 @ same sign ? rsbmi r0, r0, #0 - mov pc, lr + ret lr 11: movlo r0, #0 moveq r0, ip, asr #31 orreq r0, r0, #1 - mov pc, lr + ret lr 12: ARM_DIV2_ORDER r1, r2 cmp ip, #0 mov r0, r3, lsr r2 rsbmi r0, r0, #0 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__divsi3) @@ -315,7 +315,7 @@ UNWIND(.fnstart) 10: cmp ip, #0 rsbmi r0, r0, #0 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__modsi3) @@ -331,7 +331,7 @@ UNWIND(.save {r0, r1, ip, lr} ) ldmfd sp!, {r1, r2, ip, lr} mul r3, r0, r2 sub r1, r1, r3 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__aeabi_uidivmod) @@ -344,7 +344,7 @@ UNWIND(.save {r0, r1, ip, lr} ) ldmfd sp!, {r1, r2, ip, lr} mul r3, r0, r2 sub r1, r1, r3 - mov pc, lr + ret lr UNWIND(.fnend) ENDPROC(__aeabi_idivmod) diff --git a/arch/arm/lib/lshrdi3.S b/arch/arm/lib/lshrdi3.S index f83d449141f7820afa27e3a9d2e05509f22a8312..922dcd88b02b7804fca63f0d891e9a7ed6cbf83e 100644 --- a/arch/arm/lib/lshrdi3.S +++ b/arch/arm/lib/lshrdi3.S @@ -27,6 +27,7 @@ Boston, MA 02110-1301, USA. */ #include +#include #ifdef __ARMEB__ #define al r1 @@ -47,7 +48,7 @@ ENTRY(__aeabi_llsr) THUMB( lslmi r3, ah, ip ) THUMB( orrmi al, al, r3 ) mov ah, ah, lsr r2 - mov pc, lr + ret lr ENDPROC(__lshrdi3) ENDPROC(__aeabi_llsr) diff --git a/arch/arm/lib/memchr.S b/arch/arm/lib/memchr.S index 1da86991d7003ad958b843a0508aa10dd334e8e6..74a5bed6d9999a645d06d6d34369f9b7c155c0f9 100644 --- a/arch/arm/lib/memchr.S +++ b/arch/arm/lib/memchr.S @@ -22,5 +22,5 @@ ENTRY(memchr) bne 1b sub r0, r0, #1 2: movne r0, #0 - mov pc, lr + ret lr ENDPROC(memchr) diff --git a/arch/arm/lib/memset.S b/arch/arm/lib/memset.S index 94b0650ea98fd42492c280d20c7610382a2f4a81..671455c854fa9b6a64ed6cb3ab26a6edcbed4e23 100644 --- a/arch/arm/lib/memset.S +++ b/arch/arm/lib/memset.S @@ -110,7 +110,7 @@ ENTRY(memset) strneb r1, [ip], #1 tst r2, #1 strneb r1, [ip], #1 - mov pc, lr + ret lr 6: subs r2, r2, #4 @ 1 do we have enough blt 5b @ 1 bytes to align with? diff --git a/arch/arm/lib/memzero.S b/arch/arm/lib/memzero.S index 3fbdef5f802aa8a251a1eeb756aee910bb9d471e..385ccb306fa2145e5727c275df849fc9c661dbdd 100644 --- a/arch/arm/lib/memzero.S +++ b/arch/arm/lib/memzero.S @@ -121,5 +121,5 @@ ENTRY(__memzero) strneb r2, [r0], #1 @ 1 tst r1, #1 @ 1 a byte left over strneb r2, [r0], #1 @ 1 - mov pc, lr @ 1 + ret lr @ 1 ENDPROC(__memzero) diff --git a/arch/arm/lib/muldi3.S b/arch/arm/lib/muldi3.S index 36c91b4957e2da0d9bdc006bcf3644dbab001d72..20430595692500b7442a39f6b483b2af9afd0b2c 100644 --- a/arch/arm/lib/muldi3.S +++ b/arch/arm/lib/muldi3.S @@ -11,6 +11,7 @@ */ #include +#include #ifdef __ARMEB__ #define xh r0 @@ -41,7 +42,7 @@ ENTRY(__aeabi_lmul) adc xh, xh, yh, lsr #16 adds xl, xl, ip, lsl #16 adc xh, xh, ip, lsr #16 - mov pc, lr + ret lr ENDPROC(__muldi3) ENDPROC(__aeabi_lmul) diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 3d73dcb959b0da83bc8affe3a781b7fcbdb17752..38d660d3705f4f259c5299d2cc8c1126f0a1dbb4 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -36,7 +36,7 @@ ENTRY(__put_user_1) check_uaccess r0, 1, r1, ip, __put_user_bad 1: TUSER(strb) r2, [r0] mov r0, #0 - mov pc, lr + ret lr ENDPROC(__put_user_1) ENTRY(__put_user_2) @@ -60,14 +60,14 @@ ENTRY(__put_user_2) #endif #endif /* CONFIG_THUMB2_KERNEL */ mov r0, #0 - mov pc, lr + ret lr ENDPROC(__put_user_2) ENTRY(__put_user_4) check_uaccess r0, 4, r1, ip, __put_user_bad 4: TUSER(str) r2, [r0] mov r0, #0 - mov pc, lr + ret lr ENDPROC(__put_user_4) ENTRY(__put_user_8) @@ -80,12 +80,12 @@ ENTRY(__put_user_8) 6: TUSER(str) r3, [r0] #endif mov r0, #0 - mov pc, lr + ret lr ENDPROC(__put_user_8) __put_user_bad: mov r0, #-EFAULT - mov pc, lr + ret lr ENDPROC(__put_user_bad) .pushsection __ex_table, "a" diff --git a/arch/arm/lib/strchr.S b/arch/arm/lib/strchr.S index d8f2a1c1aea4bf15372595ab57e0a9abcacb2b4b..013d64c71e8d6aae7b0d9f826b13dbca1e32f22d 100644 --- a/arch/arm/lib/strchr.S +++ b/arch/arm/lib/strchr.S @@ -23,5 +23,5 @@ ENTRY(strchr) teq r2, r1 movne r0, #0 subeq r0, r0, #1 - mov pc, lr + ret lr ENDPROC(strchr) diff --git a/arch/arm/lib/strrchr.S b/arch/arm/lib/strrchr.S index 302f20cd24237634889ff86218f531d2b30394b1..3cec1c7482c49dbae6450af7bc66f72dfb7179c6 100644 --- a/arch/arm/lib/strrchr.S +++ b/arch/arm/lib/strrchr.S @@ -22,5 +22,5 @@ ENTRY(strrchr) teq r2, #0 bne 1b mov r0, r3 - mov pc, lr + ret lr ENDPROC(strrchr) diff --git a/arch/arm/lib/ucmpdi2.S b/arch/arm/lib/ucmpdi2.S index f0df6a91db041b7d73c2583e4441af121e898143..ad4a6309141a59c0ba3534795b93c5dbe7876814 100644 --- a/arch/arm/lib/ucmpdi2.S +++ b/arch/arm/lib/ucmpdi2.S @@ -11,6 +11,7 @@ */ #include +#include #ifdef __ARMEB__ #define xh r0 @@ -31,7 +32,7 @@ ENTRY(__ucmpdi2) movlo r0, #0 moveq r0, #1 movhi r0, #2 - mov pc, lr + ret lr ENDPROC(__ucmpdi2) @@ -44,7 +45,7 @@ ENTRY(__aeabi_ulcmp) movlo r0, #-1 moveq r0, #0 movhi r0, #1 - mov pc, lr + ret lr ENDPROC(__aeabi_ulcmp) diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index 45b55e0f0db62de039bebe152c3d503048b655e8..6cc6f7aebdaea65004409a84fa1a7913a67c1bbb 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -113,14 +113,12 @@ config SOC_AT91RM9200 select HAVE_AT91_DBGU0 select MULTI_IRQ_HANDLER select SPARSE_IRQ - select AT91_USE_OLD_CLK select HAVE_AT91_USB_CLK config SOC_AT91SAM9260 bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20" select HAVE_AT91_DBGU0 select SOC_AT91SAM9 - select AT91_USE_OLD_CLK select HAVE_AT91_USB_CLK help Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE @@ -140,7 +138,6 @@ config SOC_AT91SAM9263 select HAVE_AT91_DBGU1 select HAVE_FB_ATMEL select SOC_AT91SAM9 - select AT91_USE_OLD_CLK select HAVE_AT91_USB_CLK config SOC_AT91SAM9RL @@ -155,7 +152,6 @@ config SOC_AT91SAM9G45 select HAVE_AT91_DBGU1 select HAVE_FB_ATMEL select SOC_AT91SAM9 - select AT91_USE_OLD_CLK select HAVE_AT91_UTMI select HAVE_AT91_USB_CLK help diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 787bb50a4dff442361b587a190283a659a059de6..038702ee8bc6f370a1aabc27cf1590fd34d19fae 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -26,10 +26,11 @@ #include "at91_aic.h" #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" #include "pm.h" +#if defined(CONFIG_OLD_CLK_AT91) +#include "clock.h" /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -277,6 +278,9 @@ static void __init at91rm9200_register_clocks(void) clk_register(&pck2); clk_register(&pck3); } +#else +#define at91rm9200_register_clocks NULL +#endif /* -------------------------------------------------------------------- * GPIO diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 3f4bb58aea54d48a20e4b909a4999d1c1a8b0601..74f1eaf97801a9d262595ccae018003221c015b9 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -15,7 +15,7 @@ #include #include -#include +#include #include #include diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index c3d22be73b7cc99bc638192dce47f25ed0919821..3477ba94c4c5b8a8e80c99967a352c1c6ab3e477 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -27,10 +27,11 @@ #include "at91_rstc.h" #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" #include "pm.h" +#if defined(CONFIG_OLD_CLK_AT91) +#include "clock.h" /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -288,6 +289,9 @@ static void __init at91sam9260_register_clocks(void) clk_register(&pck0); clk_register(&pck1); } +#else +#define at91sam9260_register_clocks NULL +#endif /* -------------------------------------------------------------------- * GPIO diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index f30290572293273e94b9523ce0072f43cf607fc6..810fa5f15a51a0c7b4db7ca022185910e2d9e064 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -25,10 +25,11 @@ #include "at91_rstc.h" #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" #include "pm.h" +#if defined(CONFIG_OLD_CLK_AT91) +#include "clock.h" /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -199,6 +200,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), @@ -280,6 +282,9 @@ static void __init at91sam9263_register_clocks(void) clk_register(&pck2); clk_register(&pck3); } +#else +#define at91sam9263_register_clocks NULL +#endif /* -------------------------------------------------------------------- * GPIO diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 309390d8e2f8cebe71c09d5876d4dc89a20724f5..cef0e2f57068ac92b84767df4d4153d72d9ab36a 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -1131,9 +1131,7 @@ static void __init at91_add_device_watchdog(void) {} * PWM * --------------------------------------------------------------------*/ -#if defined(CONFIG_ATMEL_PWM) -static u32 pwm_mask; - +#if IS_ENABLED(CONFIG_PWM_ATMEL) static struct resource pwm_resources[] = { [0] = { .start = AT91SAM9263_BASE_PWMC, @@ -1148,11 +1146,8 @@ static struct resource pwm_resources[] = { }; static struct platform_device at91sam9263_pwm0_device = { - .name = "atmel_pwm", + .name = "at91sam9rl-pwm", .id = -1, - .dev = { - .platform_data = &pwm_mask, - }, .resource = pwm_resources, .num_resources = ARRAY_SIZE(pwm_resources), }; @@ -1171,8 +1166,6 @@ void __init at91_add_device_pwm(u32 mask) if (mask & (1 << AT91_PWM3)) at91_set_B_periph(AT91_PIN_PB29, 1); /* enable PWM3 */ - pwm_mask = mask; - platform_device_register(&at91sam9263_pwm0_device); } #else diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index 9d3d544ac19c95476c2a1cf513b6283100dba923..9d45496e4932689b5c2f4e14ac477280cbb149c0 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -25,10 +25,11 @@ #include "at91_aic.h" #include "soc.h" #include "generic.h" -#include "clock.h" #include "sam9_smc.h" #include "pm.h" +#if defined(CONFIG_OLD_CLK_AT91) +#include "clock.h" /* -------------------------------------------------------------------- * Clocks * -------------------------------------------------------------------- */ @@ -251,6 +252,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk), CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk), CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk), + CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk), @@ -331,6 +333,9 @@ static void __init at91sam9g45_register_clocks(void) clk_register(&pck0); clk_register(&pck1); } +#else +#define at91sam9g45_register_clocks NULL +#endif /* -------------------------------------------------------------------- * GPIO diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index 391ab6bb536afd34abe6fb6cbbc2a7cc7299b221..21ab782cc8e90340cfbb2967dbe346b2c6ae0bbb 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -1334,9 +1334,7 @@ static void __init at91_add_device_watchdog(void) {} * PWM * --------------------------------------------------------------------*/ -#if defined(CONFIG_ATMEL_PWM) || defined(CONFIG_ATMEL_PWM_MODULE) -static u32 pwm_mask; - +#if IS_ENABLED(CONFIG_PWM_ATMEL) static struct resource pwm_resources[] = { [0] = { .start = AT91SAM9G45_BASE_PWMC, @@ -1351,11 +1349,8 @@ static struct resource pwm_resources[] = { }; static struct platform_device at91sam9g45_pwm0_device = { - .name = "atmel_pwm", + .name = "at91sam9rl-pwm", .id = -1, - .dev = { - .platform_data = &pwm_mask, - }, .resource = pwm_resources, .num_resources = ARRAY_SIZE(pwm_resources), }; @@ -1374,8 +1369,6 @@ void __init at91_add_device_pwm(u32 mask) if (mask & (1 << AT91_PWM3)) at91_set_B_periph(AT91_PIN_PD0, 1); /* enable PWM3 */ - pwm_mask = mask; - platform_device_register(&at91sam9g45_pwm0_device); } #else diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index a79960f57e6abff18647e9951a844ef6fb0ef3db..878d5015daab65973686666d0af41446ebc96caf 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -200,6 +200,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc1_clk), CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk), CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk), + CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index 0b1d71a7d9bf5b0650de1fdd6c74f394f87cfdd3..37d1c9ed4562550a1ad2f4c0994f83458b4913b1 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -799,9 +799,7 @@ static void __init at91_add_device_watchdog(void) {} * PWM * --------------------------------------------------------------------*/ -#if defined(CONFIG_ATMEL_PWM) -static u32 pwm_mask; - +#if IS_ENABLED(CONFIG_PWM_ATMEL) static struct resource pwm_resources[] = { [0] = { .start = AT91SAM9RL_BASE_PWMC, @@ -816,11 +814,8 @@ static struct resource pwm_resources[] = { }; static struct platform_device at91sam9rl_pwm0_device = { - .name = "atmel_pwm", + .name = "at91sam9rl-pwm", .id = -1, - .dev = { - .platform_data = &pwm_mask, - }, .resource = pwm_resources, .num_resources = ARRAY_SIZE(pwm_resources), }; @@ -839,8 +834,6 @@ void __init at91_add_device_pwm(u32 mask) if (mask & (1 << AT91_PWM3)) at91_set_B_periph(AT91_PIN_PD8, 1); /* enable PWM3 */ - pwm_mask = mask; - platform_device_register(&at91sam9rl_pwm0_device); } #else diff --git a/arch/arm/mach-at91/board-sam9263ek.c b/arch/arm/mach-at91/board-sam9263ek.c index cd2726ee5addc96c52fdf6f443aba0c6b425e080..fc446097f410846b7d0c8fe3d347863317d4b696 100644 --- a/arch/arm/mach-at91/board-sam9263ek.c +++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -32,6 +32,8 @@ #include #include #include +#include +#include #include