Merge branch 'for-linus' into for-next

.. kernel-doc:: lib/list_sort.c

   :export:

Text Searching

--------------

.. kernel-doc:: lib/textsearch.c

   :doc: ts_intro

.. kernel-doc:: lib/textsearch.c

   :export:

.. kernel-doc:: include/linux/textsearch.h

   :functions: textsearch_find textsearch_next \

               textsearch_get_pattern textsearch_get_pattern_len

UUID/GUID

---------

 - samsung,exynos5433-tmu: 8

 - samsung,exynos7-tmu: 8

Following properties are mandatory (depending on SoC):

- samsung,tmu_gain: Gain value for internal TMU operation.

- samsung,tmu_reference_voltage: Value of TMU IP block's reference voltage

- samsung,tmu_noise_cancel_mode: Mode for noise cancellation

- samsung,tmu_efuse_value: Default level of temperature - it is needed when

			   in factory fusing produced wrong value

- samsung,tmu_min_efuse_value: Minimum temperature fused value

- samsung,tmu_max_efuse_value: Maximum temperature fused value

- samsung,tmu_first_point_trim: First point trimming value

- samsung,tmu_second_point_trim: Second point trimming value

- samsung,tmu_default_temp_offset: Default temperature offset

- samsung,tmu_cal_type: Callibration type

** Optional properties:

- vtmu-supply: This entry is optional and provides the regulator node supplying

		clocks = <&clock 383>;

		clock-names = "tmu_apbif";

		vtmu-supply = <&tmu_regulator_node>;

		#include "exynos4412-tmu-sensor-conf.dtsi"

		#thermal-sensor-cells = <0>;

	};

Example 2):

		interrupts = <0 58 0>;

		clocks = <&clock 21>;

		clock-names = "tmu_apbif";

		#include "exynos5440-tmu-sensor-conf.dtsi"

		#thermal-sensor-cells = <0>;

	};

Example 3): (In case of Exynos5420 "with misplaced TRIMINFO register")

		interrupts = <0 184 0>;

		clocks = <&clock 318>, <&clock 318>;

		clock-names = "tmu_apbif", "tmu_triminfo_apbif";

		#include "exynos4412-tmu-sensor-conf.dtsi"

		#thermal-sensor-cells = <0>;

	};

	tmu_cpu3: tmu@1006c000 {

		interrupts = <0 185 0>;

		clocks = <&clock 318>, <&clock 319>;

		clock-names = "tmu_apbif", "tmu_triminfo_apbif";

		#include "exynos4412-tmu-sensor-conf.dtsi"

		#thermal-sensor-cells = <0>;

	};

	tmu_gpu: tmu@100a0000 {

		interrupts = <0 215 0>;

		clocks = <&clock 319>, <&clock 318>;

		clock-names = "tmu_apbif", "tmu_triminfo_apbif";

		#include "exynos4412-tmu-sensor-conf.dtsi"

		#thermal-sensor-cells = <0>;

	};

Note: For multi-instance tmu each instance should have an alias correctly

the different fan speeds possible. Cooling states are referred to by

single unsigned integers, where larger numbers mean greater heat

dissipation. The precise set of cooling states associated with a device

(as referred to by the cooling-min-level and cooling-max-level

properties) should be defined in a particular device's binding.

should be defined in a particular device's binding.

For more examples of cooling devices, refer to the example sections below.

Required properties:

			See Cooling device maps section below for more details

			on how consumers refer to cooling devices.

Optional properties:

- cooling-min-level:	An integer indicating the smallest

  Type: unsigned	cooling state accepted. Typically 0.

  Size: one cell

- cooling-max-level:	An integer indicating the largest

  Type: unsigned	cooling state accepted.

  Size: one cell

* Trip points

The trip node is a node to describe a point in the temperature domain

			396000  950000

			198000  850000

		>;

		cooling-min-level = <0>;

		cooling-max-level = <3>;

		#cooling-cells = <2>; /* min followed by max */

	};

	...

	 */

	fan0: fan@48 {

		...

		cooling-min-level = <0>;

		cooling-max-level = <9>;

		#cooling-cells = <2>; /* min followed by max */

	};

};

Nuvoton NPCM7xx timer

Nuvoton NPCM7xx have three timer modules, each timer module provides five 24-bit

timer counters.

Required properties:

- compatible      : "nuvoton,npcm750-timer" for Poleg NPCM750.

- reg             : Offset and length of the register set for the device.

- interrupts      : Contain the timer interrupt with flags for

                    falling edge.

- clocks          : phandle of timer reference clock (usually a 25 MHz clock).

Example:

timer@f0008000 {

    compatible = "nuvoton,npcm750-timer";

    interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;

    reg = <0xf0008000 0x50>;

    clocks = <&clk NPCM7XX_CLK_TIMER>;

};

- interrupts :	Should be the clock event device interrupt.

- clocks :	The clocks provided by the SoC to drive the timer, must contain

		an entry for each entry in clock-names.

- clock-names : Must include the following entries: "igp" and "per".

- clock-names : Must include the following entries: "ipg" and "per".

Example:

tpm5: tpm@40260000 {