Commit 4cfb7b7c authored by Kukjin Kim's avatar Kukjin Kim
Browse files

ARM: S3C24XX: use static declaration when it is not used in other files 



Signed-off-by: default avatarKukjin Kim <kgene.kim@samsung.com>
parent e745e06f

arch/arm/mach-s3c2410/mach-h1940.c

+6 −6
Original line number Diff line number Diff line
@@ -162,7 +162,7 @@ static int h1940_gpiolib_latch_get(struct gpio_chip *chip, 
	return (latch_state >> (offset + 16)) & 1;

}



struct gpio_chip h1940_latch_gpiochip = {

static struct gpio_chip h1940_latch_gpiochip = {

	.base			= H1940_LATCH_GPIO(0),

	.owner			= THIS_MODULE,

	.label			= "H1940_LATCH",
@@ -304,7 +304,7 @@ static const struct s3c_adc_bat_thresh bat_lut_acin[] = { 
	{ .volt = 3841, .cur = 0, .level = 0},

};



int h1940_bat_init(void)

static int h1940_bat_init(void)

{

	int ret;
@@ -317,17 +317,17 @@ int h1940_bat_init(void) 


}



void h1940_bat_exit(void)

static void h1940_bat_exit(void)

{

	gpio_free(H1940_LATCH_SM803_ENABLE);

}



void h1940_enable_charger(void)

static void h1940_enable_charger(void)

{

	gpio_set_value(H1940_LATCH_SM803_ENABLE, 1);

}



void h1940_disable_charger(void)

static void h1940_disable_charger(void)

{

	gpio_set_value(H1940_LATCH_SM803_ENABLE, 0);

}
@@ -364,7 +364,7 @@ static struct platform_device h1940_battery = { 
	},

};



DEFINE_SPINLOCK(h1940_blink_spin);

static DEFINE_SPINLOCK(h1940_blink_spin);



int h1940_led_blink_set(unsigned gpio, int state,

	unsigned long *delay_on, unsigned long *delay_off)

arch/arm/mach-s3c2416/clock.c

+0 −6
Original line number Diff line number Diff line
@@ -132,12 +132,6 @@ static struct clk hsmmc0_clk = { 
	.ctrlbit	= S3C2416_HCLKCON_HSMMC0,

};



void __init_or_cpufreq s3c2416_setup_clocks(void)

{

	s3c2443_common_setup_clocks(s3c2416_get_pll);

}





static struct clksrc_clk *clksrcs[] __initdata = {

	&hsspi_eplldiv,

	&hsspi_mux,

arch/arm/mach-s3c2416/mach-smdk2416.c

+4 −4
Original line number Diff line number Diff line
@@ -125,7 +125,7 @@ static struct s3c2410_uartcfg smdk2416_uartcfgs[] __initdata = { 
	}

};



void smdk2416_hsudc_gpio_init(void)

static void smdk2416_hsudc_gpio_init(void)

{

	s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_UP);

	s3c_gpio_setpull(S3C2410_GPF(2), S3C_GPIO_PULL_NONE);
@@ -133,20 +133,20 @@ void smdk2416_hsudc_gpio_init(void) 
	s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 0);

}



void smdk2416_hsudc_gpio_uninit(void)

static void smdk2416_hsudc_gpio_uninit(void)

{

	s3c2410_modify_misccr(S3C2416_MISCCR_SEL_SUSPND, 1);

	s3c_gpio_setpull(S3C2410_GPH(14), S3C_GPIO_PULL_NONE);

	s3c_gpio_cfgpin(S3C2410_GPH(14), S3C_GPIO_SFN(0));

}



struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = {

static struct s3c24xx_hsudc_platdata smdk2416_hsudc_platdata = {

	.epnum = 9,

	.gpio_init = smdk2416_hsudc_gpio_init,

	.gpio_uninit = smdk2416_hsudc_gpio_uninit,

};



struct s3c_fb_pd_win smdk2416_fb_win[] = {

static struct s3c_fb_pd_win smdk2416_fb_win[] = {

	[0] = {

		/* think this is the same as the smdk6410 */

		.win_mode	= {

arch/arm/mach-s3c2440/mach-gta02.c

+2 −2
Original line number Diff line number Diff line
@@ -258,7 +258,7 @@ static struct pcf50633_bl_platform_data gta02_backlight_data = { 
	.ramp_time = 5,

};



struct pcf50633_platform_data gta02_pcf_pdata = {

static struct pcf50633_platform_data gta02_pcf_pdata = {

	.resumers = {

		[0] =	PCF50633_INT1_USBINS |

			PCF50633_INT1_USBREM |
@@ -404,7 +404,7 @@ static struct platform_device gta02_nor_flash = { 
};





struct platform_device s3c24xx_pwm_device = {

static struct platform_device s3c24xx_pwm_device = {

	.name		= "s3c24xx_pwm",

	.num_resources	= 0,

};

arch/arm/mach-s3c2440/mach-rx1950.c

+6 −6
Original line number Diff line number Diff line
@@ -217,7 +217,7 @@ static const struct s3c_adc_bat_thresh bat_lut_acin[] = { 
	{ .volt = 3820, .cur = 0, .level = 0},

};



int rx1950_bat_init(void)

static int rx1950_bat_init(void)

{

	int ret;
@@ -236,25 +236,25 @@ int rx1950_bat_init(void) 
	return ret;

}



void rx1950_bat_exit(void)

static void rx1950_bat_exit(void)

{

	gpio_free(S3C2410_GPJ(2));

	gpio_free(S3C2410_GPJ(3));

}



void rx1950_enable_charger(void)

static void rx1950_enable_charger(void)

{

	gpio_direction_output(S3C2410_GPJ(2), 1);

	gpio_direction_output(S3C2410_GPJ(3), 1);

}



void rx1950_disable_charger(void)

static void rx1950_disable_charger(void)

{

	gpio_direction_output(S3C2410_GPJ(2), 0);

	gpio_direction_output(S3C2410_GPJ(3), 0);

}



DEFINE_SPINLOCK(rx1950_blink_spin);

static DEFINE_SPINLOCK(rx1950_blink_spin);



static int rx1950_led_blink_set(unsigned gpio, int state,

	unsigned long *delay_on, unsigned long *delay_off)
@@ -382,7 +382,7 @@ static struct s3c2410fb_mach_info rx1950_lcd_cfg = { 


static struct pwm_device *lcd_pwm;



void rx1950_lcd_power(int enable)

static void rx1950_lcd_power(int enable)

{

	int i;

	static int enabled;