virtio-net,tap: use standard-headers

#ifndef _QEMU_VIRTIO_NET_H

#define _QEMU_VIRTIO_NET_H

#include "standard-headers/linux/virtio_net.h"

#include "hw/virtio/virtio.h"

#include "hw/pci/pci.h"

#define TYPE_VIRTIO_NET "virtio-net-device"

#define VIRTIO_NET(obj) \

        OBJECT_CHECK(VirtIONet, (obj), TYPE_VIRTIO_NET)

#define ETH_ALEN    6

/* from Linux's virtio_net.h */

/* The ID for virtio_net */

#define VIRTIO_ID_NET   1

/* The feature bitmap for virtio net */

#define VIRTIO_NET_F_CSUM       0       /* Host handles pkts w/ partial csum */

#define VIRTIO_NET_F_GUEST_CSUM 1       /* Guest handles pkts w/ partial csum */

#define VIRTIO_NET_F_CTRL_GUEST_OFFLOADS 2 /* Control channel offload

                                         * configuration support */

#define VIRTIO_NET_F_MAC        5       /* Host has given MAC address. */

#define VIRTIO_NET_F_GSO        6       /* Host handles pkts w/ any GSO type */

#define VIRTIO_NET_F_GUEST_TSO4 7       /* Guest can handle TSOv4 in. */

#define VIRTIO_NET_F_GUEST_TSO6 8       /* Guest can handle TSOv6 in. */

#define VIRTIO_NET_F_GUEST_ECN  9       /* Guest can handle TSO[6] w/ ECN in. */

#define VIRTIO_NET_F_GUEST_UFO  10      /* Guest can handle UFO in. */

#define VIRTIO_NET_F_HOST_TSO4  11      /* Host can handle TSOv4 in. */

#define VIRTIO_NET_F_HOST_TSO6  12      /* Host can handle TSOv6 in. */

#define VIRTIO_NET_F_HOST_ECN   13      /* Host can handle TSO[6] w/ ECN in. */

#define VIRTIO_NET_F_HOST_UFO   14      /* Host can handle UFO in. */

#define VIRTIO_NET_F_MRG_RXBUF  15      /* Host can merge receive buffers. */

#define VIRTIO_NET_F_STATUS     16      /* virtio_net_config.status available */

#define VIRTIO_NET_F_CTRL_VQ    17      /* Control channel available */

#define VIRTIO_NET_F_CTRL_RX    18      /* Control channel RX mode support */

#define VIRTIO_NET_F_CTRL_VLAN  19      /* Control channel VLAN filtering */

#define VIRTIO_NET_F_CTRL_RX_EXTRA 20   /* Extra RX mode control support */

#define VIRTIO_NET_F_GUEST_ANNOUNCE 21  /* Guest can announce itself */

#define VIRTIO_NET_F_MQ         22      /* Device supports Receive Flow

                                         * Steering */

#define VIRTIO_NET_F_CTRL_MAC_ADDR   23 /* Set MAC address */

#define VIRTIO_NET_S_LINK_UP    1       /* Link is up */

#define VIRTIO_NET_S_ANNOUNCE   2       /* Announcement is needed */

#define TX_TIMER_INTERVAL 150000 /* 150 us */

/* Maximum packet size we can receive from tap device: header + 64k */

#define VIRTIO_NET_MAX_BUFSIZE (sizeof(struct virtio_net_hdr) + (64 << 10))

struct virtio_net_config

{

    /* The config defining mac address ($ETH_ALEN bytes) */

    uint8_t mac[ETH_ALEN];

    /* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */

    uint16_t status;

    /* Max virtqueue pairs supported by the device */

    uint16_t max_virtqueue_pairs;

} QEMU_PACKED;

/*

 * Control virtqueue data structures

 *

 * The control virtqueue expects a header in the first sg entry

 * and an ack/status response in the last entry.  Data for the

 * command goes in between.

 */

struct virtio_net_ctrl_hdr {

    uint8_t class;

    uint8_t cmd;

};

typedef uint8_t virtio_net_ctrl_ack;

#define VIRTIO_NET_OK     0

#define VIRTIO_NET_ERR    1

/*

 * Control the RX mode, ie. promisucous, allmulti, etc...

 * All commands require an "out" sg entry containing a 1 byte

 * state value, zero = disable, non-zero = enable.  Commands

 * 0 and 1 are supported with the VIRTIO_NET_F_CTRL_RX feature.

 * Commands 2-5 are added with VIRTIO_NET_F_CTRL_RX_EXTRA.

 */

#define VIRTIO_NET_CTRL_RX    0

 #define VIRTIO_NET_CTRL_RX_PROMISC      0

 #define VIRTIO_NET_CTRL_RX_ALLMULTI     1

 #define VIRTIO_NET_CTRL_RX_ALLUNI       2

 #define VIRTIO_NET_CTRL_RX_NOMULTI      3

 #define VIRTIO_NET_CTRL_RX_NOUNI        4

 #define VIRTIO_NET_CTRL_RX_NOBCAST      5

/*

 * Control the MAC

 *

 * The MAC filter table is managed by the hypervisor, the guest should

 * assume the size is infinite.  Filtering should be considered

 * non-perfect, ie. based on hypervisor resources, the guest may

 * received packets from sources not specified in the filter list.

 *

 * In addition to the class/cmd header, the TABLE_SET command requires

 * two out scatterlists.  Each contains a 4 byte count of entries followed

 * by a concatenated byte stream of the ETH_ALEN MAC addresses.  The

 * first sg list contains unicast addresses, the second is for multicast.

 * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature

 * is available.

 *

 * The ADDR_SET command requests one out scatterlist, it contains a

 * 6 bytes MAC address. This functionality is present if the

 * VIRTIO_NET_F_CTRL_MAC_ADDR feature is available.

 */

struct virtio_net_ctrl_mac {

    uint32_t entries;

    uint8_t macs[][ETH_ALEN];

};

typedef struct VirtIONetQueue {

    VirtQueue *rx_vq;

    VirtQueue *tx_vq;

    int announce_counter;

} VirtIONet;

#define VIRTIO_NET_CTRL_MAC    1

 #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0

 #define VIRTIO_NET_CTRL_MAC_ADDR_SET         1

/*

 * Control VLAN filtering

 *

 * The VLAN filter table is controlled via a simple ADD/DEL interface.

 * VLAN IDs not added may be filterd by the hypervisor.  Del is the

 * opposite of add.  Both commands expect an out entry containing a 2

 * byte VLAN ID.  VLAN filterting is available with the

 * VIRTIO_NET_F_CTRL_VLAN feature bit.

 */

#define VIRTIO_NET_CTRL_VLAN       2

 #define VIRTIO_NET_CTRL_VLAN_ADD             0

 #define VIRTIO_NET_CTRL_VLAN_DEL             1

/*

 * Control link announce acknowledgement

 *

 * VIRTIO_NET_S_ANNOUNCE bit in the status field requests link announcement from

 * guest driver. The driver is notified by config space change interrupt.  The

 * command VIRTIO_NET_CTRL_ANNOUNCE_ACK is used to indicate that the driver has

 * received the notification. It makes the device clear the bit

 * VIRTIO_NET_S_ANNOUNCE in the status field.

 */

#define VIRTIO_NET_CTRL_ANNOUNCE       3

 #define VIRTIO_NET_CTRL_ANNOUNCE_ACK         0

/*

 * Control Multiqueue

 *

 * The command VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET

 * enables multiqueue, specifying the number of the transmit and

 * receive queues that will be used. After the command is consumed and acked by

 * the device, the device will not steer new packets on receive virtqueues

 * other than specified nor read from transmit virtqueues other than specified.

 * Accordingly, driver should not transmit new packets  on virtqueues other than

 * specified.

 */

struct virtio_net_ctrl_mq {

    uint16_t virtqueue_pairs;

};

#define VIRTIO_NET_CTRL_MQ   4

 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET        0

 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MIN        1

 #define VIRTIO_NET_CTRL_MQ_VQ_PAIRS_MAX        0x8000

/*

 * Control network offloads

 *

#include "qemu-common.h"

#include "qapi-types.h"

#include "standard-headers/linux/virtio_net.h"

int tap_enable(NetClientState *nc);

int tap_disable(NetClientState *nc);

struct vhost_net;

struct vhost_net *tap_get_vhost_net(NetClientState *nc);

struct virtio_net_hdr

{

#define VIRTIO_NET_HDR_F_NEEDS_CSUM     1       // Use csum_start, csum_offset

#define VIRTIO_NET_HDR_F_DATA_VALID    2       // Csum is valid

    uint8_t flags;

#define VIRTIO_NET_HDR_GSO_NONE         0       // Not a GSO frame

#define VIRTIO_NET_HDR_GSO_TCPV4        1       // GSO frame, IPv4 TCP (TSO)

#define VIRTIO_NET_HDR_GSO_UDP          3       // GSO frame, IPv4 UDP (UFO)

#define VIRTIO_NET_HDR_GSO_TCPV6        4       // GSO frame, IPv6 TCP

#define VIRTIO_NET_HDR_GSO_ECN          0x80    // TCP has ECN set

    uint8_t gso_type;

    uint16_t hdr_len;

    uint16_t gso_size;

    uint16_t csum_start;

    uint16_t csum_offset;

};

struct virtio_net_hdr_mrg_rxbuf

{

    struct virtio_net_hdr hdr;

    uint16_t num_buffers;   /* Number of merged rx buffers */

};

#endif /* QEMU_NET_TAP_H */