diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl
index b638e50cf8f604b8bacb3a4a0f974653ca055071..9c27e5125dd26efb5ca49c4b2bc9beadb4d559d7 100644
--- a/Documentation/DocBook/device-drivers.tmpl
+++ b/Documentation/DocBook/device-drivers.tmpl
@@ -50,7 +50,9 @@
Delaying, scheduling, and timer routines
!Iinclude/linux/sched.h
-!Ekernel/sched.c
+!Ekernel/sched/core.c
+!Ikernel/sched/cpupri.c
+!Ikernel/sched/fair.c
!Iinclude/linux/completion.h
!Ekernel/timer.c
@@ -100,9 +102,12 @@ X!Iinclude/linux/kobject.h
!Iinclude/linux/device.h
Device Drivers Base
+!Idrivers/base/init.c
!Edrivers/base/driver.c
!Edrivers/base/core.c
+!Edrivers/base/syscore.c
!Edrivers/base/class.c
+!Idrivers/base/node.c
!Edrivers/base/firmware_class.c
!Edrivers/base/transport_class.c
-!Edrivers/base/sys.c
+!Edrivers/base/dd.c
!Iinclude/linux/platform_device.h
!Edrivers/base/platform.c
!Edrivers/base/bus.c
+
+ Device Drivers DMA Management
+!Edrivers/base/dma-buf.c
+!Edrivers/base/dma-coherent.c
+!Edrivers/base/dma-mapping.c
Device Drivers Power Management
!Edrivers/base/power/main.c
@@ -216,9 +226,8 @@ X!Isound/sound_firmware.c
16x50 UART Driver
-!Iinclude/linux/serial_core.h
!Edrivers/tty/serial/serial_core.c
-!Edrivers/tty/serial/8250.c
+!Edrivers/tty/serial/8250/8250.c
diff --git a/Documentation/DocBook/deviceiobook.tmpl b/Documentation/DocBook/deviceiobook.tmpl
index c1ed6a49e598cd992552fa6e3b0da70f59aa7829..54199a0dcf9adc325d61a168d54fa913742faebf 100644
--- a/Documentation/DocBook/deviceiobook.tmpl
+++ b/Documentation/DocBook/deviceiobook.tmpl
@@ -317,7 +317,7 @@ CPU B: spin_unlock_irqrestore(&dev_lock, flags)
Public Functions Provided
!Iarch/x86/include/asm/io.h
-!Elib/iomap.c
+!Elib/pci_iomap.c
diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml
index ffee1fbbc001ae316f40be9def3b2456e20c9118..c7a4ca51785980264b37b19b3b63987a3871fe33 100644
--- a/Documentation/DocBook/media/dvb/dvbproperty.xml
+++ b/Documentation/DocBook/media/dvb/dvbproperty.xml
@@ -163,14 +163,16 @@ get/set up to 64 properties. The actual meaning of each property is described on
DTV_FREQUENCY
- Central frequency of the channel, in HZ.
+ Central frequency of the channel.
Notes:
- 1)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
+ 1)For satellital delivery systems, it is measured in kHz.
+ For the other ones, it is measured in Hz.
+ 2)For ISDB-T, the channels are usually transmitted with an offset of 143kHz.
E.g. a valid frequncy could be 474143 kHz. The stepping is bound to the bandwidth of
the channel which is 6MHz.
- 2)As in ISDB-Tsb the channel consists of only one or three segments the
+ 3)As in ISDB-Tsb the channel consists of only one or three segments the
frequency step is 429kHz, 3*429 respectively. As for ISDB-T the
central frequency of the channel is expected.
@@ -735,14 +737,10 @@ typedef enum fe_hierarchy {
DTV_TUNE
DTV_CLEAR
DTV_FREQUENCY
- DTV_MODULATION
DTV_BANDWIDTH_HZ
DTV_INVERSION
- DTV_CODE_RATE_HP
- DTV_CODE_RATE_LP
DTV_GUARD_INTERVAL
DTV_TRANSMISSION_MODE
- DTV_HIERARCHY
DTV_ISDBT_LAYER_ENABLED
DTV_ISDBT_PARTIAL_RECEPTION
DTV_ISDBT_SOUND_BROADCASTING
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
index 6f1f9a629dc34d1508bd550342d810f05f2b5028..b17a7aac6997482379e1b43c8b0d7e5cf914e1f0 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-ext-ctrls.xml
@@ -183,7 +183,12 @@ applications must set the array to zero.
__u32
ctrl_class
The control class to which all controls belong, see
-.
+. Drivers that use a kernel framework for handling
+controls will also accept a value of 0 here, meaning that the controls can
+belong to any control class. Whether drivers support this can be tested by setting
+ctrl_class to 0 and calling VIDIOC_TRY_EXT_CTRLS
+with a count of 0. If that succeeds, then the driver
+supports this feature.
__u32
@@ -194,10 +199,13 @@ also be zero.
__u32
error_idx
- Set by the driver in case of an error. It is the
-index of the control causing the error or equal to 'count' when the
-error is not associated with a particular control. Undefined when the
-ioctl returns 0 (success).
+ Set by the driver in case of an error. If it is equal
+to count, then no actual changes were made to
+controls. In other words, the error was not associated with setting a particular
+control. If it is another value, then only the controls up to error_idx-1
+were modified and control error_idx is the one that
+caused the error. The error_idx value is undefined
+if the ioctl returned 0 (success).
__u32
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml
index 93817f33703305beae49acafa52b1bceb0613dd2..7c63815e7afd0eb964a1848513dea5be14eb677e 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-fbuf.xml
@@ -364,15 +364,20 @@ capability and it is cleared otherwise.
V4L2_FBUF_FLAG_OVERLAY
0x0002
- The frame buffer is an overlay surface the same
-size as the capture. [?]
-
-
- The purpose of
-V4L2_FBUF_FLAG_OVERLAY was never quite clear.
-Most drivers seem to ignore this flag. For compatibility with the
-bttv driver applications should set the
-V4L2_FBUF_FLAG_OVERLAY flag.
+ If this flag is set for a video capture device, then the
+driver will set the initial overlay size to cover the full framebuffer size,
+otherwise the existing overlay size (as set by &VIDIOC-S-FMT;) will be used.
+
+Only one video capture driver (bttv) supports this flag. The use of this flag
+for capture devices is deprecated. There is no way to detect which drivers
+support this flag, so the only reliable method of setting the overlay size is
+through &VIDIOC-S-FMT;.
+
+If this flag is set for a video output device, then the video output overlay
+window is relative to the top-left corner of the framebuffer and restricted
+to the size of the framebuffer. If it is cleared, then the video output
+overlay window is relative to the video output display.
+
V4L2_FBUF_FLAG_CHROMAKEY
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml
index 16431813bebd253f87965029088ee733328c36e5..66e9a5257861ab1c5f65b197e3bc7e52304659e6 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-frequency.xml
@@ -98,8 +98,11 @@ the &v4l2-output; modulator field and the
&v4l2-tuner-type;
type
The tuner type. This is the same value as in the
-&v4l2-tuner; type field. The field is not
-applicable to modulators, &ie; ignored by drivers.
+&v4l2-tuner; type field. The type must be set
+to V4L2_TUNER_RADIO for /dev/radioX
+device nodes, and to V4L2_TUNER_ANALOG_TV
+for all others. The field is not applicable to modulators, &ie; ignored
+by drivers.
__u32
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-input.xml b/Documentation/DocBook/media/v4l/vidioc-g-input.xml
index 08ae82f131f2b952df2a0f5488b49d0747776153..1d43065090dd1087be1c26a8f54804ac8a4ee2c2 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-input.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-input.xml
@@ -61,8 +61,8 @@ desired input in an integer and call the
VIDIOC_S_INPUT ioctl with a pointer to this
integer. Side effects are possible. For example inputs may support
different video standards, so the driver may implicitly switch the
-current standard. It is good practice to select an input before
-querying or negotiating any other parameters.
+current standard. Because of these possible side effects applications
+must select an input before querying or negotiating any other parameters.
Information about video inputs is available using the
&VIDIOC-ENUMINPUT; ioctl.
diff --git a/Documentation/DocBook/media/v4l/vidioc-g-output.xml b/Documentation/DocBook/media/v4l/vidioc-g-output.xml
index fd45f1c13ccf445b89e582036b40c3a7a94ab86c..4533068ecb8ad5dd221512d5f6dc8a7266b66ecb 100644
--- a/Documentation/DocBook/media/v4l/vidioc-g-output.xml
+++ b/Documentation/DocBook/media/v4l/vidioc-g-output.xml
@@ -61,8 +61,9 @@ desired output in an integer and call the
VIDIOC_S_OUTPUT ioctl with a pointer to this integer.
Side effects are possible. For example outputs may support different
video standards, so the driver may implicitly switch the current
-standard. It is good practice to select an output before querying or
-negotiating any other parameters.
+standard.
+standard. Because of these possible side effects applications
+must select an output before querying or negotiating any other parameters.
Information about video outputs is available using the
&VIDIOC-ENUMOUTPUT; ioctl.
diff --git a/Documentation/acpi/apei/einj.txt b/Documentation/acpi/apei/einj.txt
index 5cc699ba5453479ea13a028236f0d568063edb1e..e7cc363972173ca0177de6bfb7ce3f38de89bde2 100644
--- a/Documentation/acpi/apei/einj.txt
+++ b/Documentation/acpi/apei/einj.txt
@@ -47,20 +47,53 @@ directory apei/einj. The following files are provided.
- param1
This file is used to set the first error parameter value. Effect of
- parameter depends on error_type specified. For memory error, this is
- physical memory address. Only available if param_extension module
- parameter is specified.
+ parameter depends on error_type specified.
- param2
This file is used to set the second error parameter value. Effect of
- parameter depends on error_type specified. For memory error, this is
- physical memory address mask. Only available if param_extension
- module parameter is specified.
+ parameter depends on error_type specified.
+
+BIOS versions based in the ACPI 4.0 specification have limited options
+to control where the errors are injected. Your BIOS may support an
+extension (enabled with the param_extension=1 module parameter, or
+boot command line einj.param_extension=1). This allows the address
+and mask for memory injections to be specified by the param1 and
+param2 files in apei/einj.
+
+BIOS versions using the ACPI 5.0 specification have more control over
+the target of the injection. For processor related errors (type 0x1,
+0x2 and 0x4) the APICID of the target should be provided using the
+param1 file in apei/einj. For memory errors (type 0x8, 0x10 and 0x20)
+the address is set using param1 with a mask in param2 (0x0 is equivalent
+to all ones). For PCI express errors (type 0x40, 0x80 and 0x100) the
+segment, bus, device and function are specified using param1:
+
+ 31 24 23 16 15 11 10 8 7 0
+ +-------------------------------------------------+
+ | segment | bus | device | function | reserved |
+ +-------------------------------------------------+
+
+An ACPI 5.0 BIOS may also allow vendor specific errors to be injected.
+In this case a file named vendor will contain identifying information
+from the BIOS that hopefully will allow an application wishing to use
+the vendor specific extension to tell that they are running on a BIOS
+that supports it. All vendor extensions have the 0x80000000 bit set in
+error_type. A file vendor_flags controls the interpretation of param1
+and param2 (1 = PROCESSOR, 2 = MEMORY, 4 = PCI). See your BIOS vendor
+documentation for details (and expect changes to this API if vendors
+creativity in using this feature expands beyond our expectations).
+
+Example:
+# cd /sys/kernel/debug/apei/einj
+# cat available_error_type # See which errors can be injected
+0x00000002 Processor Uncorrectable non-fatal
+0x00000008 Memory Correctable
+0x00000010 Memory Uncorrectable non-fatal
+# echo 0x12345000 > param1 # Set memory address for injection
+# echo 0xfffffffffffff000 > param2 # Mask - anywhere in this page
+# echo 0x8 > error_type # Choose correctable memory error
+# echo 1 > error_inject # Inject now
-Injecting parameter support is a BIOS version specific extension, that
-is, it only works on some BIOS version. If you want to use it, please
-make sure your BIOS version has the proper support and specify
-"param_extension=y" in module parameter.
For more information about EINJ, please refer to ACPI specification
-version 4.0, section 17.5.
+version 4.0, section 17.5 and ACPI 5.0, section 18.6.
diff --git a/Documentation/devices.txt b/Documentation/devices.txt
index cec8864ce4e8cbb4089b68279255c51645938554..00383186d8fb3e2c0fc4d5a12852844cb5b2721f 100644
--- a/Documentation/devices.txt
+++ b/Documentation/devices.txt
@@ -447,6 +447,9 @@ Your cooperation is appreciated.
234 = /dev/btrfs-control Btrfs control device
235 = /dev/autofs Autofs control device
236 = /dev/mapper/control Device-Mapper control device
+ 237 = /dev/loop-control Loopback control device
+ 238 = /dev/vhost-net Host kernel accelerator for virtio net
+
240-254 Reserved for local use
255 Reserved for MISC_DYNAMIC_MINOR
diff --git a/Documentation/devicetree/bindings/dma/atmel-dma.txt b/Documentation/devicetree/bindings/dma/atmel-dma.txt
new file mode 100644
index 0000000000000000000000000000000000000000..3c046ee6e8b5dd54e14f7fcc6fb8699792aa4b7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/atmel-dma.txt
@@ -0,0 +1,14 @@
+* Atmel Direct Memory Access Controller (DMA)
+
+Required properties:
+- compatible: Should be "atmel,-dma"
+- reg: Should contain DMA registers location and length
+- interrupts: Should contain DMA interrupt
+
+Examples:
+
+dma@ffffec00 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffec00 0x200>;
+ interrupts = <21>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/omap-i2c.txt b/Documentation/devicetree/bindings/i2c/omap-i2c.txt
new file mode 100644
index 0000000000000000000000000000000000000000..56564aa4b444addcf9b770bfd4dbe6476f2b3d4d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/omap-i2c.txt
@@ -0,0 +1,30 @@
+I2C for OMAP platforms
+
+Required properties :
+- compatible : Must be "ti,omap3-i2c" or "ti,omap4-i2c"
+- ti,hwmods : Must be "i2c", n being the instance number (1-based)
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Recommended properties :
+- clock-frequency : Desired I2C bus clock frequency in Hz. Otherwise
+ the default 100 kHz frequency will be used.
+
+Optional properties:
+- Child nodes conforming to i2c bus binding
+
+Note: Current implementation will fetch base address, irq and dma
+from omap hwmod data base during device registration.
+Future plan is to migrate hwmod data base contents into device tree
+blob so that, all the required data will be used from device tree dts
+file.
+
+Examples :
+
+i2c1: i2c@0 {
+ compatible = "ti,omap3-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "i2c1";
+ clock-frequency = <400000>;
+};
diff --git a/Documentation/dmaengine.txt b/Documentation/dmaengine.txt
index 94b7e0f96b38fa8086ea14f7cd88718b45e84d70..bbe6cb3d1856b8943dd04d3449af9d39d5c1e7dc 100644
--- a/Documentation/dmaengine.txt
+++ b/Documentation/dmaengine.txt
@@ -75,6 +75,10 @@ The slave DMA usage consists of following steps:
slave_sg - DMA a list of scatter gather buffers from/to a peripheral
dma_cyclic - Perform a cyclic DMA operation from/to a peripheral till the
operation is explicitly stopped.
+ interleaved_dma - This is common to Slave as well as M2M clients. For slave
+ address of devices' fifo could be already known to the driver.
+ Various types of operations could be expressed by setting
+ appropriate values to the 'dma_interleaved_template' members.
A non-NULL return of this transfer API represents a "descriptor" for
the given transaction.
@@ -89,6 +93,10 @@ The slave DMA usage consists of following steps:
struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
size_t period_len, enum dma_data_direction direction);
+ struct dma_async_tx_descriptor *(*device_prep_interleaved_dma)(
+ struct dma_chan *chan, struct dma_interleaved_template *xt,
+ unsigned long flags);
+
The peripheral driver is expected to have mapped the scatterlist for
the DMA operation prior to calling device_prep_slave_sg, and must
keep the scatterlist mapped until the DMA operation has completed.
diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt
index 10c64c8a13d4f2aec7bebb0bd6a44ce401aa78cc..41c0c5d1ba145a392e17d42dc4ce8ac9c3c41a49 100644
--- a/Documentation/driver-model/devres.txt
+++ b/Documentation/driver-model/devres.txt
@@ -233,6 +233,10 @@ certainly invest a bit more effort into libata core layer).
6. List of managed interfaces
-----------------------------
+MEM
+ devm_kzalloc()
+ devm_kfree()
+
IO region
devm_request_region()
devm_request_mem_region()
diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt
index d725c0dfe032f0692ab9de9a4358dfdcdd711f39..a0ffac029a0dc703322d922f3ec59435e3315ef3 100644
--- a/Documentation/feature-removal-schedule.txt
+++ b/Documentation/feature-removal-schedule.txt
@@ -439,17 +439,6 @@ Who: Jean Delvare
----------------------------
-What: For VIDIOC_S_FREQUENCY the type field must match the device node's type.
- If not, return -EINVAL.
-When: 3.2
-Why: It makes no sense to switch the tuner to radio mode by calling
- VIDIOC_S_FREQUENCY on a video node, or to switch the tuner to tv mode by
- calling VIDIOC_S_FREQUENCY on a radio node. This is the first step of a
- move to more consistent handling of tv and radio tuners.
-Who: Hans Verkuil
-
-----------------------------
-
What: Opening a radio device node will no longer automatically switch the
tuner mode from tv to radio.
When: 3.3
@@ -521,3 +510,17 @@ Why: The pci_scan_bus_parented() interface creates a new root bus. The
convert to using pci_scan_root_bus() so they can supply a list of
bus resources when the bus is created.
Who: Bjorn Helgaas
+
+----------------------------
+
+What: The CAP9 SoC family will be removed
+When: 3.4
+Files: arch/arm/mach-at91/at91cap9.c
+ arch/arm/mach-at91/at91cap9_devices.c
+ arch/arm/mach-at91/include/mach/at91cap9.h
+ arch/arm/mach-at91/include/mach/at91cap9_matrix.h
+ arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+ arch/arm/mach-at91/board-cap9adk.c
+Why: The code is not actively maintained and platforms are now hard to find.
+Who: Nicolas Ferre
+ Jean-Christophe PLAGNIOL-VILLARD
diff --git a/Documentation/input/event-codes.txt b/Documentation/input/event-codes.txt
index 23fcb05175be70e0d140febdc153751763f38d04..53305bd08182dac8db030112ed9dadf1bf99efc9 100644
--- a/Documentation/input/event-codes.txt
+++ b/Documentation/input/event-codes.txt
@@ -17,11 +17,11 @@ reports supported by a device are also provided by sysfs in
class/input/event*/device/capabilities/, and the properties of a device are
provided in class/input/event*/device/properties.
-Types:
-==========
-Types are groupings of codes under a logical input construct. Each type has a
-set of applicable codes to be used in generating events. See the Codes section
-for details on valid codes for each type.
+Event types:
+===========
+Event types are groupings of codes under a logical input construct. Each
+type has a set of applicable codes to be used in generating events. See the
+Codes section for details on valid codes for each type.
* EV_SYN:
- Used as markers to separate events. Events may be separated in time or in
@@ -63,9 +63,9 @@ for details on valid codes for each type.
* EV_FF_STATUS:
- Used to receive force feedback device status.
-Codes:
-==========
-Codes define the precise type of event.
+Event codes:
+===========
+Event codes define the precise type of event.
EV_SYN:
----------
@@ -220,6 +220,56 @@ EV_PWR:
EV_PWR events are a special type of event used specifically for power
mangement. Its usage is not well defined. To be addressed later.
+Device properties:
+=================
+Normally, userspace sets up an input device based on the data it emits,
+i.e., the event types. In the case of two devices emitting the same event
+types, additional information can be provided in the form of device
+properties.
+
+INPUT_PROP_DIRECT + INPUT_PROP_POINTER:
+--------------------------------------
+The INPUT_PROP_DIRECT property indicates that device coordinates should be
+directly mapped to screen coordinates (not taking into account trivial
+transformations, such as scaling, flipping and rotating). Non-direct input
+devices require non-trivial transformation, such as absolute to relative
+transformation for touchpads. Typical direct input devices: touchscreens,
+drawing tablets; non-direct devices: touchpads, mice.
+
+The INPUT_PROP_POINTER property indicates that the device is not transposed
+on the screen and thus requires use of an on-screen pointer to trace user's
+movements. Typical pointer devices: touchpads, tablets, mice; non-pointer
+device: touchscreen.
+
+If neither INPUT_PROP_DIRECT or INPUT_PROP_POINTER are set, the property is
+considered undefined and the device type should be deduced in the
+traditional way, using emitted event types.
+
+INPUT_PROP_BUTTONPAD:
+--------------------
+For touchpads where the button is placed beneath the surface, such that
+pressing down on the pad causes a button click, this property should be
+set. Common in clickpad notebooks and macbooks from 2009 and onwards.
+
+Originally, the buttonpad property was coded into the bcm5974 driver
+version field under the name integrated button. For backwards
+compatibility, both methods need to be checked in userspace.
+
+INPUT_PROP_SEMI_MT:
+------------------
+Some touchpads, most common between 2008 and 2011, can detect the presence
+of multiple contacts without resolving the individual positions; only the
+number of contacts and a rectangular shape is known. For such
+touchpads, the semi-mt property should be set.
+
+Depending on the device, the rectangle may enclose all touches, like a
+bounding box, or just some of them, for instance the two most recent
+touches. The diversity makes the rectangle of limited use, but some
+gestures can normally be extracted from it.
+
+If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT
+device.
+
Guidelines:
==========
The guidelines below ensure proper single-touch and multi-finger functionality.
@@ -240,6 +290,8 @@ used to report when a touch is active on the screen.
BTN_{MOUSE,LEFT,MIDDLE,RIGHT} must not be reported as the result of touch
contact. BTN_TOOL_ events should be reported where possible.
+For new hardware, INPUT_PROP_DIRECT should be set.
+
Trackpads:
----------
Legacy trackpads that only provide relative position information must report
@@ -250,6 +302,8 @@ location of the touch. BTN_TOUCH should be used to report when a touch is active
on the trackpad. Where multi-finger support is available, BTN_TOOL_ should
be used to report the number of touches active on the trackpad.
+For new hardware, INPUT_PROP_POINTER should be set.
+
Tablets:
----------
BTN_TOOL_ events must be reported when a stylus or other tool is active on
@@ -260,3 +314,5 @@ button may be used for buttons on the tablet except BTN_{MOUSE,LEFT}.
BTN_{0,1,2,etc} are good generic codes for unlabeled buttons. Do not use
meaningful buttons, like BTN_FORWARD, unless the button is labeled for that
purpose on the device.
+
+For new hardware, both INPUT_PROP_DIRECT and INPUT_PROP_POINTER should be set.
diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index 54078ed96b3751724acaf0bd3fdab95df962480f..4840334ea97b30705df13a2c642e976a83621800 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -149,6 +149,7 @@ Code Seq#(hex) Include File Comments
'M' 01-03 drivers/scsi/megaraid/megaraid_sas.h
'M' 00-0F drivers/video/fsl-diu-fb.h conflict!
'N' 00-1F drivers/usb/scanner.h
+'N' 40-7F drivers/block/nvme.c
'O' 00-06 mtd/ubi-user.h UBI
'P' all linux/soundcard.h conflict!
'P' 60-6F sound/sscape_ioctl.h conflict!
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index b29f3c416296ef880203a02c1d9b8c707f09206a..033d4e69b43b107d9780ec959105823e6cefd07c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1059,6 +1059,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
By default, super page will be supported if Intel IOMMU
has the capability. With this option, super page will
not be supported.
+
+ intel_idle.max_cstate= [KNL,HW,ACPI,X86]
+ 0 disables intel_idle and fall back on acpi_idle.
+ 1 to 6 specify maximum depth of C-state.
+
intremap= [X86-64, Intel-IOMMU]
on enable Interrupt Remapping (default)
off disable Interrupt Remapping
diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt
index 6727b92bc2fb9db3f700d3056c1360e0297c09b5..150fd3833d0bfa114e39ce8d8d6687425aace459 100644
--- a/Documentation/pinctrl.txt
+++ b/Documentation/pinctrl.txt
@@ -857,42 +857,41 @@ case), we define a mapping like this:
...
{
- .name "2bit"
+ .name = "2bit"
.ctrl_dev_name = "pinctrl-foo",
.function = "mmc0",
.group = "mmc0_1_grp",
.dev_name = "foo-mmc.0",
},
{
- .name "4bit"
+ .name = "4bit"
.ctrl_dev_name = "pinctrl-foo",
.function = "mmc0",
.group = "mmc0_1_grp",
.dev_name = "foo-mmc.0",
},
{
- .name "4bit"
+ .name = "4bit"
.ctrl_dev_name = "pinctrl-foo",
.function = "mmc0",
.group = "mmc0_2_grp",
.dev_name = "foo-mmc.0",
},
{
- .name "8bit"
+ .name = "8bit"
.ctrl_dev_name = "pinctrl-foo",
- .function = "mmc0",
.group = "mmc0_1_grp",
.dev_name = "foo-mmc.0",
},
{
- .name "8bit"
+ .name = "8bit"
.ctrl_dev_name = "pinctrl-foo",
.function = "mmc0",
.group = "mmc0_2_grp",
.dev_name = "foo-mmc.0",
},
{
- .name "8bit"
+ .name = "8bit"
.ctrl_dev_name = "pinctrl-foo",
.function = "mmc0",
.group = "mmc0_3_grp",
@@ -995,7 +994,7 @@ This is enabled by simply setting the .hog_on_boot field in the map to true,
like this:
{
- .name "POWERMAP"
+ .name = "POWERMAP"
.ctrl_dev_name = "pinctrl-foo",
.function = "power_func",
.hog_on_boot = true,
@@ -1025,7 +1024,7 @@ it, disables and releases it, and muxes it in on the pins defined by group B:
foo_switch()
{
- struct pinmux pmx;
+ struct pinmux *pmx;
/* Enable on position A */
pmx = pinmux_get(&device, "spi0-pos-A");
diff --git a/Documentation/power/basic-pm-debugging.txt b/Documentation/power/basic-pm-debugging.txt
index 40a4c65f380a10479a7a805d58310be97b1a2ee1..262acf56fa79b6cb5973b5e408e6bcd8b437b33d 100644
--- a/Documentation/power/basic-pm-debugging.txt
+++ b/Documentation/power/basic-pm-debugging.txt
@@ -15,7 +15,7 @@ test at least a couple of times in a row for confidence. [This is necessary,
because some problems only show up on a second attempt at suspending and
resuming the system.] Moreover, hibernating in the "reboot" and "shutdown"
modes causes the PM core to skip some platform-related callbacks which on ACPI
-systems might be necessary to make hibernation work. Thus, if you machine fails
+systems might be necessary to make hibernation work. Thus, if your machine fails
to hibernate or resume in the "reboot" mode, you should try the "platform" mode:
# echo platform > /sys/power/disk
diff --git a/Documentation/power/freezing-of-tasks.txt b/Documentation/power/freezing-of-tasks.txt
index 6ccb68f68da685a39cefc0c2bf0609924c292b38..ebd7490ef1df8eefdbaeb94ad656aeb091f9368f 100644
--- a/Documentation/power/freezing-of-tasks.txt
+++ b/Documentation/power/freezing-of-tasks.txt
@@ -120,10 +120,10 @@ So in practice, the 'at all' may become a 'why freeze kernel threads?' and
freezing user threads I don't find really objectionable."
Still, there are kernel threads that may want to be freezable. For example, if
-a kernel that belongs to a device driver accesses the device directly, it in
-principle needs to know when the device is suspended, so that it doesn't try to
-access it at that time. However, if the kernel thread is freezable, it will be
-frozen before the driver's .suspend() callback is executed and it will be
+a kernel thread that belongs to a device driver accesses the device directly, it
+in principle needs to know when the device is suspended, so that it doesn't try
+to access it at that time. However, if the kernel thread is freezable, it will
+be frozen before the driver's .suspend() callback is executed and it will be
thawed after the driver's .resume() callback has run, so it won't be accessing
the device while it's suspended.
diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas
index 64adb98b181c717f763bff24109bc8bf9aff104a..57566bacb4c56c8182f0e9b16bafe74c9b1233ab 100644
--- a/Documentation/scsi/ChangeLog.megaraid_sas
+++ b/Documentation/scsi/ChangeLog.megaraid_sas
@@ -1,3 +1,13 @@
+Release Date : Fri. Jan 6, 2012 17:00:00 PST 2010 -
+ (emaild-id:megaraidlinux@lsi.com)
+ Adam Radford
+Current Version : 00.00.06.14-rc1
+Old Version : 00.00.06.12-rc1
+ 1. Fix reglockFlags for degraded raid5/6 for MR 9360/9380.
+ 2. Mask off flags in ioctl path to prevent memory scribble with older
+ MegaCLI versions.
+ 3. Remove poll_mode_io module paramater, sysfs node, and associated code.
+-------------------------------------------------------------------------------
Release Date : Wed. Oct 5, 2011 17:00:00 PST 2010 -
(emaild-id:megaraidlinux@lsi.com)
Adam Radford
diff --git a/Documentation/scsi/LICENSE.qla4xxx b/Documentation/scsi/LICENSE.qla4xxx
index 494980e404912a861a238423e9189708549eaa66..ab899591ecb7a93dfe6c8b936042c3b8f400bd42 100644
--- a/Documentation/scsi/LICENSE.qla4xxx
+++ b/Documentation/scsi/LICENSE.qla4xxx
@@ -1,32 +1,11 @@
Copyright (c) 2003-2011 QLogic Corporation
-QLogic Linux iSCSI HBA Driver
+QLogic Linux iSCSI Driver
This program includes a device driver for Linux 3.x.
You may modify and redistribute the device driver code under the
GNU General Public License (a copy of which is attached hereto as
Exhibit A) published by the Free Software Foundation (version 2).
-REGARDLESS OF WHAT LICENSING MECHANISM IS USED OR APPLICABLE,
-THIS PROGRAM IS PROVIDED BY QLOGIC CORPORATION "AS IS'' AND ANY
-EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
-IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
-PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR
-BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
-EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
-TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
-OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
-OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
-POSSIBILITY OF SUCH DAMAGE.
-
-USER ACKNOWLEDGES AND AGREES THAT USE OF THIS PROGRAM WILL NOT
-CREATE OR GIVE GROUNDS FOR A LICENSE BY IMPLICATION, ESTOPPEL, OR
-OTHERWISE IN ANY INTELLECTUAL PROPERTY RIGHTS (PATENT, COPYRIGHT,
-TRADE SECRET, MASK WORK, OR OTHER PROPRIETARY RIGHT) EMBODIED IN
-ANY OTHER QLOGIC HARDWARE OR SOFTWARE EITHER SOLELY OR IN
-COMBINATION WITH THIS PROGRAM.
-
EXHIBIT A
diff --git a/Documentation/stable_kernel_rules.txt b/Documentation/stable_kernel_rules.txt
index 21fd05c28e738e146b313081bbd4294687ddabdf..f0ab5cf28fcae0a1ff0783bf8a4ddc477447f585 100644
--- a/Documentation/stable_kernel_rules.txt
+++ b/Documentation/stable_kernel_rules.txt
@@ -25,7 +25,8 @@ Procedure for submitting patches to the -stable tree:
- Send the patch, after verifying that it follows the above rules, to
stable@vger.kernel.org. You must note the upstream commit ID in the
- changelog of your submission.
+ changelog of your submission, as well as the kernel version you wish
+ it to be applied to.
- To have the patch automatically included in the stable tree, add the tag
Cc: stable@vger.kernel.org
in the sign-off area. Once the patch is merged it will be applied to
diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt
index 8c20fbd8b42dd922daa92f223bbefa9ffcc4f8e3..6d78841fd41677d4f81dbcb53eed7ab8602cddb4 100644
--- a/Documentation/sysctl/kernel.txt
+++ b/Documentation/sysctl/kernel.txt
@@ -601,6 +601,8 @@ can be ORed together:
instead of using the one provided by the hardware.
512 - A kernel warning has occurred.
1024 - A module from drivers/staging was loaded.
+2048 - The system is working around a severe firmware bug.
+4096 - An out-of-tree module has been loaded.
==============================================================
diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py
index 7ef9b843d529a5fadbe05eb19ad6c34fd8293cd5..6e21b8b52638a1f0ab014cd46b532d341ba17619 100755
--- a/Documentation/target/tcm_mod_builder.py
+++ b/Documentation/target/tcm_mod_builder.py
@@ -230,14 +230,9 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += "#include \n"
buf += "#include \n\n"
buf += "#include \n"
- buf += "#include \n"
- buf += "#include \n"
+ buf += "#include \n"
buf += "#include \n"
- buf += "#include \n"
- buf += "#include \n"
- buf += "#include \n"
buf += "#include \n"
- buf += "#include \n"
buf += "#include \n\n"
buf += "#include \"" + fabric_mod_name + "_base.h\"\n"
buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n"
@@ -260,7 +255,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " /* " + fabric_mod_name + "_parse_wwn(name, &wwpn, 1) < 0)\n"
buf += " return ERR_PTR(-EINVAL); */\n"
buf += " se_nacl_new = " + fabric_mod_name + "_alloc_fabric_acl(se_tpg);\n"
- buf += " if (!(se_nacl_new))\n"
+ buf += " if (!se_nacl_new)\n"
buf += " return ERR_PTR(-ENOMEM);\n"
buf += "//#warning FIXME: Hardcoded nexus depth in " + fabric_mod_name + "_make_nodeacl()\n"
buf += " nexus_depth = 1;\n"
@@ -308,7 +303,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " if (strict_strtoul(name + 5, 10, &tpgt) || tpgt > UINT_MAX)\n"
buf += " return ERR_PTR(-EINVAL);\n\n"
buf += " tpg = kzalloc(sizeof(struct " + fabric_mod_name + "_tpg), GFP_KERNEL);\n"
- buf += " if (!(tpg)) {\n"
+ buf += " if (!tpg) {\n"
buf += " printk(KERN_ERR \"Unable to allocate struct " + fabric_mod_name + "_tpg\");\n"
buf += " return ERR_PTR(-ENOMEM);\n"
buf += " }\n"
@@ -344,7 +339,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " /* if (" + fabric_mod_name + "_parse_wwn(name, &wwpn, 1) < 0)\n"
buf += " return ERR_PTR(-EINVAL); */\n\n"
buf += " " + fabric_mod_port + " = kzalloc(sizeof(struct " + fabric_mod_name + "_" + fabric_mod_port + "), GFP_KERNEL);\n"
- buf += " if (!(" + fabric_mod_port + ")) {\n"
+ buf += " if (!" + fabric_mod_port + ") {\n"
buf += " printk(KERN_ERR \"Unable to allocate struct " + fabric_mod_name + "_" + fabric_mod_port + "\");\n"
buf += " return ERR_PTR(-ENOMEM);\n"
buf += " }\n"
@@ -352,7 +347,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
if proto_ident == "FC" or proto_ident == "SAS":
buf += " " + fabric_mod_port + "->" + fabric_mod_port + "_wwpn = wwpn;\n"
- buf += " /* " + fabric_mod_name + "_format_wwn(&" + fabric_mod_port + "->" + fabric_mod_port + "_name[0], " + fabric_mod_name.upper() + "__NAMELEN, wwpn); */\n\n"
+ buf += " /* " + fabric_mod_name + "_format_wwn(&" + fabric_mod_port + "->" + fabric_mod_port + "_name[0], " + fabric_mod_name.upper() + "_NAMELEN, wwpn); */\n\n"
buf += " return &" + fabric_mod_port + "->" + fabric_mod_port + "_wwn;\n"
buf += "}\n\n"
buf += "static void " + fabric_mod_name + "_drop_" + fabric_mod_port + "(struct se_wwn *wwn)\n"
@@ -391,8 +386,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " .tpg_alloc_fabric_acl = " + fabric_mod_name + "_alloc_fabric_acl,\n"
buf += " .tpg_release_fabric_acl = " + fabric_mod_name + "_release_fabric_acl,\n"
buf += " .tpg_get_inst_index = " + fabric_mod_name + "_tpg_get_inst_index,\n"
- buf += " .release_cmd_to_pool = " + fabric_mod_name + "_release_cmd,\n"
- buf += " .release_cmd_direct = " + fabric_mod_name + "_release_cmd,\n"
+ buf += " .release_cmd = " + fabric_mod_name + "_release_cmd,\n"
buf += " .shutdown_session = " + fabric_mod_name + "_shutdown_session,\n"
buf += " .close_session = " + fabric_mod_name + "_close_session,\n"
buf += " .stop_session = " + fabric_mod_name + "_stop_session,\n"
@@ -405,14 +399,12 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " .set_default_node_attributes = " + fabric_mod_name + "_set_default_node_attrs,\n"
buf += " .get_task_tag = " + fabric_mod_name + "_get_task_tag,\n"
buf += " .get_cmd_state = " + fabric_mod_name + "_get_cmd_state,\n"
- buf += " .new_cmd_failure = " + fabric_mod_name + "_new_cmd_failure,\n"
buf += " .queue_data_in = " + fabric_mod_name + "_queue_data_in,\n"
buf += " .queue_status = " + fabric_mod_name + "_queue_status,\n"
buf += " .queue_tm_rsp = " + fabric_mod_name + "_queue_tm_rsp,\n"
buf += " .get_fabric_sense_len = " + fabric_mod_name + "_get_fabric_sense_len,\n"
buf += " .set_fabric_sense_len = " + fabric_mod_name + "_set_fabric_sense_len,\n"
buf += " .is_state_remove = " + fabric_mod_name + "_is_state_remove,\n"
- buf += " .pack_lun = " + fabric_mod_name + "_pack_lun,\n"
buf += " /*\n"
buf += " * Setup function pointers for generic logic in target_core_fabric_configfs.c\n"
buf += " */\n"
@@ -439,9 +431,9 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " * Register the top level struct config_item_type with TCM core\n"
buf += " */\n"
buf += " fabric = target_fabric_configfs_init(THIS_MODULE, \"" + fabric_mod_name[4:] + "\");\n"
- buf += " if (!(fabric)) {\n"
+ buf += " if (IS_ERR(fabric)) {\n"
buf += " printk(KERN_ERR \"target_fabric_configfs_init() failed\\n\");\n"
- buf += " return -ENOMEM;\n"
+ buf += " return PTR_ERR(fabric);\n"
buf += " }\n"
buf += " /*\n"
buf += " * Setup fabric->tf_ops from our local " + fabric_mod_name + "_ops\n"
@@ -475,9 +467,9 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " printk(KERN_INFO \"" + fabric_mod_name.upper() + "[0] - Set fabric -> " + fabric_mod_name + "_fabric_configfs\\n\");\n"
buf += " return 0;\n"
buf += "};\n\n"
- buf += "static void " + fabric_mod_name + "_deregister_configfs(void)\n"
+ buf += "static void __exit " + fabric_mod_name + "_deregister_configfs(void)\n"
buf += "{\n"
- buf += " if (!(" + fabric_mod_name + "_fabric_configfs))\n"
+ buf += " if (!" + fabric_mod_name + "_fabric_configfs)\n"
buf += " return;\n\n"
buf += " target_fabric_configfs_deregister(" + fabric_mod_name + "_fabric_configfs);\n"
buf += " " + fabric_mod_name + "_fabric_configfs = NULL;\n"
@@ -492,17 +484,15 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += " return ret;\n\n"
buf += " return 0;\n"
buf += "};\n\n"
- buf += "static void " + fabric_mod_name + "_exit(void)\n"
+ buf += "static void __exit " + fabric_mod_name + "_exit(void)\n"
buf += "{\n"
buf += " " + fabric_mod_name + "_deregister_configfs();\n"
buf += "};\n\n"
- buf += "#ifdef MODULE\n"
buf += "MODULE_DESCRIPTION(\"" + fabric_mod_name.upper() + " series fabric driver\");\n"
buf += "MODULE_LICENSE(\"GPL\");\n"
buf += "module_init(" + fabric_mod_name + "_init);\n"
buf += "module_exit(" + fabric_mod_name + "_exit);\n"
- buf += "#endif\n"
ret = p.write(buf)
if ret:
@@ -514,7 +504,7 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name):
def tcm_mod_scan_fabric_ops(tcm_dir):
- fabric_ops_api = tcm_dir + "include/target/target_core_fabric_ops.h"
+ fabric_ops_api = tcm_dir + "include/target/target_core_fabric.h"
print "Using tcm_mod_scan_fabric_ops: " + fabric_ops_api
process_fo = 0;
@@ -579,11 +569,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += "#include \n"
buf += "#include \n\n"
buf += "#include \n"
- buf += "#include \n"
- buf += "#include \n"
- buf += "#include \n"
- buf += "#include \n"
- buf += "#include \n"
+ buf += "#include \n"
buf += "#include \n\n"
buf += "#include \"" + fabric_mod_name + "_base.h\"\n"
buf += "#include \"" + fabric_mod_name + "_fabric.h\"\n\n"
@@ -788,7 +774,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += "{\n"
buf += " struct " + fabric_mod_name + "_nacl *nacl;\n\n"
buf += " nacl = kzalloc(sizeof(struct " + fabric_mod_name + "_nacl), GFP_KERNEL);\n"
- buf += " if (!(nacl)) {\n"
+ buf += " if (!nacl) {\n"
buf += " printk(KERN_ERR \"Unable to alocate struct " + fabric_mod_name + "_nacl\\n\");\n"
buf += " return NULL;\n"
buf += " }\n\n"
@@ -815,7 +801,7 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += "}\n\n"
bufi += "u32 " + fabric_mod_name + "_tpg_get_inst_index(struct se_portal_group *);\n"
- if re.search('release_cmd_to_pool', fo):
+ if re.search('\*release_cmd\)\(', fo):
buf += "void " + fabric_mod_name + "_release_cmd(struct se_cmd *se_cmd)\n"
buf += "{\n"
buf += " return;\n"
@@ -899,13 +885,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += "}\n\n"
bufi += "int " + fabric_mod_name + "_get_cmd_state(struct se_cmd *);\n"
- if re.search('new_cmd_failure\)\(', fo):
- buf += "void " + fabric_mod_name + "_new_cmd_failure(struct se_cmd *se_cmd)\n"
- buf += "{\n"
- buf += " return;\n"
- buf += "}\n\n"
- bufi += "void " + fabric_mod_name + "_new_cmd_failure(struct se_cmd *);\n"
-
if re.search('queue_data_in\)\(', fo):
buf += "int " + fabric_mod_name + "_queue_data_in(struct se_cmd *se_cmd)\n"
buf += "{\n"
@@ -948,15 +927,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name):
buf += "}\n\n"
bufi += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *);\n"
- if re.search('pack_lun\)\(', fo):
- buf += "u64 " + fabric_mod_name + "_pack_lun(unsigned int lun)\n"
- buf += "{\n"
- buf += " WARN_ON(lun >= 256);\n"
- buf += " /* Caller wants this byte-swapped */\n"
- buf += " return cpu_to_le64((lun & 0xff) << 8);\n"
- buf += "}\n\n"
- bufi += "u64 " + fabric_mod_name + "_pack_lun(unsigned int);\n"
-
ret = p.write(buf)
if ret:
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index b61e46f449aa1e0bf376de21ddf2eec55c196a39..1733ab947a95d3849ff650e7252cfb1d0cb99d11 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -284,7 +284,7 @@ method, the sys I/F structure will be built like this:
The framework includes a simple notification mechanism, in the form of a
netlink event. Netlink socket initialization is done during the _init_
of the framework. Drivers which intend to use the notification mechanism
-just need to call generate_netlink_event() with two arguments viz
+just need to call thermal_generate_netlink_event() with two arguments viz
(originator, event). Typically the originator will be an integer assigned
to a thermal_zone_device when it registers itself with the framework. The
event will be one of:{THERMAL_AUX0, THERMAL_AUX1, THERMAL_CRITICAL,
diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt
index 26aa0573933e8f5f970f7f18b3f53f0afd37eb6d..e2492a9d1027b95be62b9fde675b043643a7f01c 100644
--- a/Documentation/video4linux/v4l2-controls.txt
+++ b/Documentation/video4linux/v4l2-controls.txt
@@ -666,27 +666,6 @@ a control of this type whenever the first control belonging to a new control
class is added.
-Differences from the Spec
-=========================
-
-There are a few places where the framework acts slightly differently from the
-V4L2 Specification. Those differences are described in this section. We will
-have to see whether we need to adjust the spec or not.
-
-1) It is no longer required to have all controls contained in a
-v4l2_ext_control array be from the same control class. The framework will be
-able to handle any type of control in the array. You need to set ctrl_class
-to 0 in order to enable this. If ctrl_class is non-zero, then it will still
-check that all controls belong to that control class.
-
-If you set ctrl_class to 0 and count to 0, then it will only return an error
-if there are no controls at all.
-
-2) Clarified the way error_idx works. For get and set it will be equal to
-count if nothing was done yet. If it is less than count then only the controls
-up to error_idx-1 were successfully applied.
-
-
Proposals for Extensions
========================
diff --git a/Documentation/virtual/00-INDEX b/Documentation/virtual/00-INDEX
index 8e601991d91c6b4e0247cd9b7a5735f3df7661b3..924bd462675e90ab222cc45d8824f734be72612c 100644
--- a/Documentation/virtual/00-INDEX
+++ b/Documentation/virtual/00-INDEX
@@ -4,8 +4,6 @@ Virtualization support in the Linux kernel.
- this file.
kvm/
- Kernel Virtual Machine. See also http://linux-kvm.org
-lguest/
- - Extremely simple hypervisor for experimental/educational use.
uml/
- User Mode Linux, builds/runs Linux kernel as a userspace program.
virtio.txt
diff --git a/MAINTAINERS b/MAINTAINERS
index 2a90101309d1b396a9f8417a52dd55256b333731..924fb0bb52e04878e7e7b5638c1cf9b69bc34cb5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -159,7 +159,7 @@ S: Maintained
F: drivers/net/ethernet/realtek/r8169.c
8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
-M: Greg Kroah-Hartman
+M: Greg Kroah-Hartman
L: linux-serial@vger.kernel.org
W: http://serial.sourceforge.net
S: Maintained
@@ -745,6 +745,7 @@ M: Barry Song
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-prima2/
+F: drivers/dma/sirf-dma*
ARM/EBSA110 MACHINE SUPPORT
M: Russell King
@@ -788,12 +789,6 @@ F: arch/arm/mach-mx*/
F: arch/arm/mach-imx/
F: arch/arm/plat-mxc/
-ARM/FREESCALE IMX51
-M: Amit Kucheria
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/mach-mx5/
-
ARM/FREESCALE IMX6
M: Shawn Guo
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
@@ -1411,6 +1406,7 @@ F: net/ax25/
B43 WIRELESS DRIVER
M: Stefano Brivio
L: linux-wireless@vger.kernel.org
+L: b43-dev@lists.infradead.org (moderated for non-subscribers)
W: http://linuxwireless.org/en/users/Drivers/b43
S: Maintained
F: drivers/net/wireless/b43/
@@ -1587,6 +1583,13 @@ L: linux-scsi@vger.kernel.org
S: Supported
F: drivers/scsi/bnx2fc/
+BROADCOM SPECIFIC AMBA DRIVER (BCMA)
+M: Rafał Miłecki
+L: linux-wireless@vger.kernel.org
+S: Maintained
+F: drivers/bcma/
+F: include/linux/bcma/
+
BROCADE BFA FC SCSI DRIVER
M: Jing Huang
L: linux-scsi@vger.kernel.org
@@ -1774,9 +1777,9 @@ X: net/wireless/wext*
CHAR and MISC DRIVERS
M: Arnd Bergmann
-M: Greg Kroah-Hartman
+M: Greg Kroah-Hartman
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
-S: Maintained
+S: Supported
F: drivers/char/*
F: drivers/misc/*
@@ -2237,6 +2240,17 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm.git
S: Supported
F: fs/dlm/
+DMA BUFFER SHARING FRAMEWORK
+M: Sumit Semwal
+S: Maintained
+L: linux-media@vger.kernel.org
+L: dri-devel@lists.freedesktop.org
+L: linaro-mm-sig@lists.linaro.org
+F: drivers/base/dma-buf*
+F: include/linux/dma-buf*
+F: Documentation/dma-buf-sharing.txt
+T: git git://git.linaro.org/people/sumitsemwal/linux-dma-buf.git
+
DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
M: Vinod Koul
M: Dan Williams
@@ -2267,7 +2281,7 @@ F: drivers/acpi/dock.c
DOCUMENTATION
M: Randy Dunlap
L: linux-doc@vger.kernel.org
-T: quilt http://userweb.kernel.org/~rdunlap/kernel-doc-patches/current/
+T: quilt http://xenotime.net/kernel-doc-patches/current/
S: Maintained
F: Documentation/
@@ -2300,7 +2314,7 @@ F: lib/lru_cache.c
F: Documentation/blockdev/drbd/
DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
-M: Greg Kroah-Hartman
+M: Greg Kroah-Hartman
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
S: Supported
F: Documentation/kobject.txt
@@ -2330,6 +2344,9 @@ F: include/drm/i915*
DRM DRIVERS FOR EXYNOS
M: Inki Dae
+M: Joonyoung Shim
+M: Seung-Woo Kim
+M: Kyungmin Park
L: dri-devel@lists.freedesktop.org
S: Supported
F: drivers/gpu/drm/exynos
@@ -2382,7 +2399,7 @@ F: net/bridge/netfilter/ebt*.c
ECRYPT FILE SYSTEM
M: Tyler Hicks
-M: Dustin Kirkland
+M: Dustin Kirkland
L: ecryptfs@vger.kernel.org
W: https://launchpad.net/ecryptfs
S: Supported
@@ -3301,6 +3318,12 @@ S: Maintained
F: net/ieee802154/
F: drivers/ieee802154/
+IIO SUBSYSTEM AND DRIVERS
+M: Jonathan Cameron
+L: linux-iio@vger.kernel.org
+S: Maintained
+F: drivers/staging/iio/
+
IKANOS/ADI EAGLE ADSL USB DRIVER
M: Matthieu Castet
M: Stanislaw Gruszka
@@ -3969,11 +3992,11 @@ M: Rusty Russell
L: lguest@lists.ozlabs.org
W: http://lguest.ozlabs.org/
S: Odd Fixes
-F: Documentation/virtual/lguest/
+F: arch/x86/include/asm/lguest*.h
F: arch/x86/lguest/
F: drivers/lguest/
F: include/linux/lguest*.h
-F: arch/x86/include/asm/lguest*.h
+F: tools/lguest/
LINUX FOR IBM pSERIES (RS/6000)
M: Paul Mackerras
@@ -4113,10 +4136,11 @@ L: linux-ntfs-dev@lists.sourceforge.net
W: http://www.linux-ntfs.org/content/view/19/37/
S: Maintained
F: Documentation/ldm.txt
-F: fs/partitions/ldm.*
+F: block/partitions/ldm.*
LogFS
M: Joern Engel
+M: Prasad Joshi
L: logfs@logfs.org
W: logfs.org
S: Maintained
@@ -4258,13 +4282,6 @@ S: Orphan
F: drivers/video/matrox/matroxfb_*
F: include/linux/matroxfb.h
-MAX1668 TEMPERATURE SENSOR DRIVER
-M: "David George"
-L: lm-sensors@lm-sensors.org
-S: Maintained
-F: Documentation/hwmon/max1668
-F: drivers/hwmon/max1668.c
-
MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
M: "Hans J. Koch"
L: lm-sensors@lm-sensors.org
@@ -5616,7 +5633,7 @@ W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
F: arch/s390/
F: drivers/s390/
-F: fs/partitions/ibm.c
+F: block/partitions/ibm.c
F: Documentation/s390/
F: Documentation/DocBook/s390*
@@ -5844,9 +5861,9 @@ S: Maintained
F: drivers/mmc/host/sdhci-spear.c
SECURITY SUBSYSTEM
-M: James Morris
+M: James Morris
L: linux-security-module@vger.kernel.org (suggested Cc:)
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security.git
W: http://security.wiki.kernel.org/
S: Supported
F: security/
@@ -5857,7 +5874,7 @@ S: Supported
SELINUX SECURITY MODULE
M: Stephen Smalley
-M: James Morris
+M: James Morris
M: Eric Paris
L: selinux@tycho.nsa.gov (subscribers-only, general discussion)
W: http://selinuxproject.org
@@ -6116,13 +6133,6 @@ S: Maintained
F: drivers/ssb/
F: include/linux/ssb/
-BROADCOM SPECIFIC AMBA DRIVER (BCMA)
-M: Rafał Miłecki
-L: linux-wireless@vger.kernel.org
-S: Maintained
-F: drivers/bcma/
-F: include/linux/bcma/
-
SONY VAIO CONTROL DEVICE DRIVER
M: Mattia Dongili
L: platform-driver-x86@vger.kernel.org
@@ -6266,15 +6276,15 @@ S: Maintained
F: arch/alpha/kernel/srm_env.c
STABLE BRANCH
-M: Greg Kroah-Hartman
+M: Greg Kroah-Hartman
L: stable@vger.kernel.org
-S: Maintained
+S: Supported
STAGING SUBSYSTEM
-M: Greg Kroah-Hartman
+M: Greg Kroah-Hartman
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
L: devel@driverdev.osuosl.org
-S: Maintained
+S: Supported
F: drivers/staging/
STAGING - AGERE HERMES II and II.5 WIRELESS DRIVERS
@@ -6386,11 +6396,6 @@ M: Omar Ramirez Luna
S: Odd Fixes
F: drivers/staging/tidspbridge/
-STAGING - TRIDENT TVMASTER TMxxxx USB VIDEO CAPTURE DRIVERS
-L: linux-media@vger.kernel.org
-S: Odd Fixes
-F: drivers/staging/tm6000/
-
STAGING - USB ENE SM/MS CARD READER DRIVER
M: Al Cho
S: Odd Fixes
@@ -6659,10 +6664,10 @@ S: Maintained
K: ^Subject:.*(?i)trivial
TTY LAYER
-M: Greg Kroah-Hartman
-S: Maintained
+M: Greg Kroah-Hartman
+S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6.git
-F: drivers/tty/*
+F: drivers/tty/
F: drivers/tty/serial/serial_core.c
F: include/linux/serial_core.h
F: include/linux/serial.h
@@ -6948,7 +6953,7 @@ S: Maintained
F: drivers/usb/serial/digi_acceleport.c
USB SERIAL DRIVER
-M: Greg Kroah-Hartman
+M: Greg Kroah-Hartman
L: linux-usb@vger.kernel.org
S: Supported
F: Documentation/usb/usb-serial.txt
@@ -6963,9 +6968,8 @@ S: Maintained
F: drivers/usb/serial/empeg.c
USB SERIAL KEYSPAN DRIVER
-M: Greg Kroah-Hartman
+M: Greg Kroah-Hartman
L: linux-usb@vger.kernel.org
-W: http://www.kroah.com/linux/
S: Maintained
F: drivers/usb/serial/*keyspan*
@@ -6993,7 +6997,7 @@ F: Documentation/video4linux/sn9c102.txt
F: drivers/media/video/sn9c102/
USB SUBSYSTEM
-M: Greg Kroah-Hartman
+M: Greg Kroah-Hartman
L: linux-usb@vger.kernel.org
W: http://www.linux-usb.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6.git
@@ -7080,7 +7084,7 @@ F: fs/hppfs/
USERSPACE I/O (UIO)
M: "Hans J. Koch"
-M: Greg Kroah-Hartman
+M: Greg Kroah-Hartman
S: Maintained
F: Documentation/DocBook/uio-howto.tmpl
F: drivers/uio/
@@ -7198,7 +7202,7 @@ S: Maintained
F: drivers/net/vmxnet3/
VMware PVSCSI driver
-M: Alok Kataria
+M: Arvind Kumar
M: VMware PV-Drivers
L: linux-scsi@vger.kernel.org
S: Maintained
@@ -7355,6 +7359,7 @@ S: Supported
F: Documentation/hwmon/wm83??
F: arch/arm/mach-s3c64xx/mach-crag6410*
F: drivers/leds/leds-wm83*.c
+F: drivers/hwmon/wm83??-hwmon.c
F: drivers/input/misc/wm831x-on.c
F: drivers/input/touchscreen/wm831x-ts.c
F: drivers/input/touchscreen/wm97*.c
diff --git a/Makefile b/Makefile
index 156ac69c961e8d0ec0b99649aae2d72a0e85c313..4ddd641ab615d9d8f591a765007b312204028bad 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
VERSION = 3
-PATCHLEVEL = 2
+PATCHLEVEL = 3
SUBLEVEL = 0
-EXTRAVERSION =
+EXTRAVERSION = -rc4
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 24626b0419ee97e963e68329a8eb6769360b46ea..a48aecc17eacc2e3d3f5cf4b0ff4183f29b33440 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -754,7 +754,7 @@ config ARCH_SA1100
select ARCH_HAS_CPUFREQ
select CPU_FREQ
select GENERIC_CLOCKEVENTS
- select CLKDEV_LOOKUP
+ select HAVE_CLK
select HAVE_SCHED_CLOCK
select TICK_ONESHOT
select ARCH_REQUIRE_GPIOLIB
@@ -825,7 +825,6 @@ config ARCH_S5PC100
select HAVE_CLK
select CLKDEV_LOOKUP
select CPU_V7
- select ARM_L1_CACHE_SHIFT_6
select ARCH_USES_GETTIMEOFFSET
select HAVE_S3C2410_I2C if I2C
select HAVE_S3C_RTC if RTC_CLASS
@@ -842,7 +841,6 @@ config ARCH_S5PV210
select HAVE_CLK
select CLKDEV_LOOKUP
select CLKSRC_MMIO
- select ARM_L1_CACHE_SHIFT_6
select ARCH_HAS_CPUFREQ
select GENERIC_CLOCKEVENTS
select HAVE_SCHED_CLOCK
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 40319d91bb7fb7fd9381c8f60cc2423230d83c0b..1683bfb9166fa0d8d1124a2d23f5d5d347cdc4a0 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MSM) := msm
machine-$(CONFIG_ARCH_MV78XX0) := mv78xx0
machine-$(CONFIG_ARCH_IMX_V4_V5) := imx
machine-$(CONFIG_ARCH_IMX_V6_V7) := imx
-machine-$(CONFIG_ARCH_MX5) := mx5
machine-$(CONFIG_ARCH_MXS) := mxs
machine-$(CONFIG_ARCH_NETX) := netx
machine-$(CONFIG_ARCH_NOMADIK) := nomadik
diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi
index 63d7578856c13d987d234e648f1065ced58a5174..a1dd2ee83753d0740c4d774dd03b556b2614f309 100644
--- a/arch/arm/boot/dts/exynos4210.dtsi
+++ b/arch/arm/boot/dts/exynos4210.dtsi
@@ -29,6 +29,7 @@
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;
interrupt-controller;
+ cpu-offset = <0x8000>;
reg = <0x10490000 0x1000>, <0x10480000 0x100>;
};
diff --git a/arch/arm/boot/dts/tegra-paz00.dts b/arch/arm/boot/dts/tegra-paz00.dts
index 1a1d7023b69b427bda55a11b0dff61e8849e001b..825d2957da0b819a8ac9204df02dff60fee9dbbc 100644
--- a/arch/arm/boot/dts/tegra-paz00.dts
+++ b/arch/arm/boot/dts/tegra-paz00.dts
@@ -46,11 +46,11 @@
};
serial@70006200 {
- status = "disable";
+ clock-frequency = <216000000>;
};
serial@70006300 {
- clock-frequency = <216000000>;
+ status = "disable";
};
serial@70006400 {
@@ -60,7 +60,7 @@
sdhci@c8000000 {
cd-gpios = <&gpio 173 0>; /* gpio PV5 */
wp-gpios = <&gpio 57 0>; /* gpio PH1 */
- power-gpios = <&gpio 155 0>; /* gpio PT3 */
+ power-gpios = <&gpio 169 0>; /* gpio PV1 */
};
sdhci@c8000200 {
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index b2dc2dd7f1df6d25fbba306e0822563883b18859..c47d6199b784c1f7aa3c4838dc9aea2d5cf576a0 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -41,6 +41,7 @@
#include
#include
+#include
#include
#include
@@ -352,11 +353,7 @@ static void __init gic_dist_init(struct gic_chip_data *gic)
unsigned int gic_irqs = gic->gic_irqs;
struct irq_domain *domain = &gic->domain;
void __iomem *base = gic_data_dist_base(gic);
- u32 cpu = 0;
-
-#ifdef CONFIG_SMP
- cpu = cpu_logical_map(smp_processor_id());
-#endif
+ u32 cpu = cpu_logical_map(smp_processor_id());
cpumask = 1 << cpu;
cpumask |= cpumask << 8;
diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c
index d1bcd7b13ebc963c195fc88064fed9191984b4fe..fb1f1cfce60c098f94966663e0b6d06dc88496cd 100644
--- a/arch/arm/common/it8152.c
+++ b/arch/arm/common/it8152.c
@@ -320,13 +320,6 @@ int __init it8152_pci_setup(int nr, struct pci_sys_data *sys)
return -EBUSY;
}
-/*
- * If we set up a device for bus mastering, we need to check the latency
- * timer as we don't have even crappy BIOSes to set it properly.
- * The implementation is from arch/i386/pci/i386.c
- */
-unsigned int pcibios_max_latency = 255;
-
/* ITE bridge requires setting latency timer to avoid early bus access
termination by PCI bus master devices
*/
diff --git a/arch/arm/common/pl330.c b/arch/arm/common/pl330.c
index d8e44a43047ce5cce3a2db34b9368eafe157f579..ff3ad22448247bcc18bbc9c185563a0adf88ff18 100644
--- a/arch/arm/common/pl330.c
+++ b/arch/arm/common/pl330.c
@@ -1502,12 +1502,13 @@ int pl330_chan_ctrl(void *ch_id, enum pl330_chan_op op)
struct pl330_thread *thrd = ch_id;
struct pl330_dmac *pl330;
unsigned long flags;
- int ret = 0, active = thrd->req_running;
+ int ret = 0, active;
if (!thrd || thrd->free || thrd->dmac->state == DYING)
return -EINVAL;
pl330 = thrd->dmac;
+ active = thrd->req_running;
spin_lock_irqsave(&pl330->lock, flags);
diff --git a/arch/arm/configs/mx5_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
similarity index 80%
rename from arch/arm/configs/mx5_defconfig
rename to arch/arm/configs/imx_v6_v7_defconfig
index d0d8dfece37ee7073023b7ea3f1fade5ffebc1d0..3a4fb2e5fc68fb53c54467d466da94d295703f72 100644
--- a/arch/arm/configs/mx5_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -3,6 +3,7 @@ CONFIG_EXPERIMENTAL=y
CONFIG_KERNEL_LZO=y
CONFIG_SYSVIPC=y
CONFIG_LOG_BUF_SHIFT=18
+CONFIG_CGROUPS=y
CONFIG_RELAY=y
CONFIG_EXPERT=y
# CONFIG_SLUB_DEBUG is not set
@@ -14,20 +15,31 @@ CONFIG_MODULE_SRCVERSION_ALL=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_ARCH_MXC=y
-CONFIG_ARCH_MX5=y
-CONFIG_MACH_MX51_BABBAGE=y
+CONFIG_MACH_MX31LILLY=y
+CONFIG_MACH_MX31LITE=y
+CONFIG_MACH_PCM037=y
+CONFIG_MACH_PCM037_EET=y
+CONFIG_MACH_MX31_3DS=y
+CONFIG_MACH_MX31MOBOARD=y
+CONFIG_MACH_QONG=y
+CONFIG_MACH_ARMADILLO5X0=y
+CONFIG_MACH_KZM_ARM11_01=y
+CONFIG_MACH_PCM043=y
+CONFIG_MACH_MX35_3DS=y
+CONFIG_MACH_EUKREA_CPUIMX35=y
+CONFIG_MACH_VPR200=y
+CONFIG_MACH_IMX51_DT=y
CONFIG_MACH_MX51_3DS=y
CONFIG_MACH_EUKREA_CPUIMX51=y
CONFIG_MACH_EUKREA_CPUIMX51SD=y
CONFIG_MACH_MX51_EFIKAMX=y
CONFIG_MACH_MX51_EFIKASB=y
-CONFIG_MACH_MX53_EVK=y
-CONFIG_MACH_MX53_SMD=y
-CONFIG_MACH_MX53_LOCO=y
-CONFIG_MACH_MX53_ARD=y
+CONFIG_MACH_IMX53_DT=y
+CONFIG_SOC_IMX6Q=y
CONFIG_MXC_PWM=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_SMP=y
CONFIG_VMSPLIT_2G=y
CONFIG_PREEMPT_VOLUNTARY=y
CONFIG_AEABI=y
@@ -49,7 +61,7 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_INET_XFRM_MODE_TUNNEL is not set
# CONFIG_INET_XFRM_MODE_BEET is not set
# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
+CONFIG_IPV6=y
# CONFIG_WIRELESS is not set
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
@@ -68,24 +80,20 @@ CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_ATA=y
CONFIG_PATA_IMX=y
CONFIG_NETDEVICES=y
-CONFIG_MII=m
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_QSEMI_PHY=y
-CONFIG_LXT_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_BROADCOM_PHY=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_REALTEK_PHY=y
-CONFIG_NATIONAL_PHY=y
-CONFIG_STE10XP=y
-CONFIG_LSI_ET1011C_PHY=y
-CONFIG_MICREL_PHY=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+CONFIG_FEC=y
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+CONFIG_SMC91X=y
+CONFIG_SMC911X=y
+CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
# CONFIG_WLAN is not set
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_INPUT_EVDEV=y
@@ -124,7 +132,6 @@ CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
CONFIG_USB_STORAGE=y
CONFIG_MMC=y
-CONFIG_MMC_BLOCK=m
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_ESDHC_IMX=y
@@ -133,6 +140,8 @@ CONFIG_LEDS_CLASS=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
CONFIG_RTC_MXC=y
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
deleted file mode 100644
index cb0717fbb03d3a6eebad8d6cae49e69700b89041..0000000000000000000000000000000000000000
--- a/arch/arm/configs/mx3_defconfig
+++ /dev/null
@@ -1,144 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EXPERT=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_MXC=y
-CONFIG_MACH_MX31ADS_WM1133_EV1=y
-CONFIG_MACH_MX31LILLY=y
-CONFIG_MACH_MX31LITE=y
-CONFIG_MACH_PCM037=y
-CONFIG_MACH_PCM037_EET=y
-CONFIG_MACH_MX31_3DS=y
-CONFIG_MACH_MX31MOBOARD=y
-CONFIG_MACH_QONG=y
-CONFIG_MACH_ARMADILLO5X0=y
-CONFIG_MACH_KZM_ARM11_01=y
-CONFIG_MACH_PCM043=y
-CONFIG_MACH_MX35_3DS=y
-CONFIG_MACH_EUKREA_CPUIMX35=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_MXC_PWM=y
-CONFIG_ARM_ERRATA_411920=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-CONFIG_VFP=y
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_MTD_UBI=y
-# CONFIG_BLK_DEV is not set
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_AT24=y
-CONFIG_NETDEVICES=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_SMSC911X=y
-CONFIG_DNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_IMX=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_IMX2_WDT=y
-CONFIG_MFD_WM8350_I2C=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_WM8350=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_VIDEO_DEV=y
-# CONFIG_RC_CORE is not set
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_MT9M001=y
-CONFIG_SOC_CAMERA_MT9M111=y
-CONFIG_SOC_CAMERA_MT9T031=y
-CONFIG_SOC_CAMERA_MT9V022=y
-CONFIG_SOC_CAMERA_TW9910=y
-CONFIG_SOC_CAMERA_OV772X=y
-CONFIG_VIDEO_MX3=y
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-CONFIG_SND_SOC=y
-CONFIG_SND_IMX_SOC=y
-CONFIG_SND_MXC_SOC_WM1133_EV1=y
-CONFIG_SND_SOC_PHYCORE_AC97=y
-CONFIG_SND_SOC_EUKREA_TLV320=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_GADGET=m
-CONFIG_USB_FSL_USB2=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_ULPI=y
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_MXC=y
-CONFIG_DMADEVICES=y
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index b6e65dedfd716db5e336451868af811e34a684dc..23371b17b23ebfa3a5a987eeb0aa0065660a37e1 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -137,6 +137,11 @@
disable_irq
.endm
+ .macro save_and_disable_irqs_notrace, oldcpsr
+ mrs \oldcpsr, cpsr
+ disable_irq_notrace
+ .endm
+
/*
* Restore interrupt state previously stored in a register. We don't
* guarantee that this will preserve the flags.
@@ -237,7 +242,7 @@
*/
#ifdef CONFIG_THUMB2_KERNEL
- .macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=T()
+ .macro usraccoff, instr, reg, ptr, inc, off, cond, abort, t=TUSER()
9999:
.if \inc == 1
\instr\cond\()b\()\t\().w \reg, [\ptr, #\off]
@@ -277,7 +282,7 @@
#else /* !CONFIG_THUMB2_KERNEL */
- .macro usracc, instr, reg, ptr, inc, cond, rept, abort, t=T()
+ .macro usracc, instr, reg, ptr, inc, cond, rept, abort, t=TUSER()
.rept \rept
9999:
.if \inc == 1
diff --git a/arch/arm/include/asm/domain.h b/arch/arm/include/asm/domain.h
index af18ceaacf5d2ec2bafe51de722387fb3249ac4e..b5dc173d336f93f88d7fa63e0b0c91def5393255 100644
--- a/arch/arm/include/asm/domain.h
+++ b/arch/arm/include/asm/domain.h
@@ -83,9 +83,9 @@
* instructions (inline assembly)
*/
#ifdef CONFIG_CPU_USE_DOMAINS
-#define T(instr) #instr "t"
+#define TUSER(instr) #instr "t"
#else
-#define T(instr) #instr
+#define TUSER(instr) #instr
#endif
#else /* __ASSEMBLY__ */
@@ -95,9 +95,9 @@
* instructions
*/
#ifdef CONFIG_CPU_USE_DOMAINS
-#define T(instr) instr ## t
+#define TUSER(instr) instr ## t
#else
-#define T(instr) instr
+#define TUSER(instr) instr
#endif
#endif /* __ASSEMBLY__ */
diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h
index 253cc86318bf84907e8f003bac9dc09ae72fab6b..7be54690aeec0f38be6bb2738a8a7df8a243021d 100644
--- a/arch/arm/include/asm/futex.h
+++ b/arch/arm/include/asm/futex.h
@@ -75,9 +75,9 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \
__asm__ __volatile__( \
- "1: " T(ldr) " %1, [%3]\n" \
+ "1: " TUSER(ldr) " %1, [%3]\n" \
" " insn "\n" \
- "2: " T(str) " %0, [%3]\n" \
+ "2: " TUSER(str) " %0, [%3]\n" \
" mov %0, #0\n" \
__futex_atomic_ex_table("%5") \
: "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \
@@ -95,10 +95,10 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
return -EFAULT;
__asm__ __volatile__("@futex_atomic_cmpxchg_inatomic\n"
- "1: " T(ldr) " %1, [%4]\n"
+ "1: " TUSER(ldr) " %1, [%4]\n"
" teq %1, %2\n"
" it eq @ explicit IT needed for the 2b label\n"
- "2: " T(streq) " %3, [%4]\n"
+ "2: " TUSER(streq) " %3, [%4]\n"
__futex_atomic_ex_table("%5")
: "+r" (ret), "=&r" (val)
: "r" (oldval), "r" (newval), "r" (uaddr), "Ir" (-EFAULT)
diff --git a/arch/arm/include/asm/hardware/pl330.h b/arch/arm/include/asm/hardware/pl330.h
index 575fa8186ca0fcb47ce864ff564f13a69bed3660..c1821385abfacbcc1532a25ee1bd2b0307173c09 100644
--- a/arch/arm/include/asm/hardware/pl330.h
+++ b/arch/arm/include/asm/hardware/pl330.h
@@ -41,7 +41,7 @@ enum pl330_dstcachectrl {
DCCTRL1, /* Bufferable only */
DCCTRL2, /* Cacheable, but do not allocate */
DCCTRL3, /* Cacheable and bufferable, but do not allocate */
- DINVALID1 = 8,
+ DINVALID1, /* AWCACHE = 0x1000 */
DINVALID2,
DCCTRL6, /* Cacheable write-through, allocate on writes only */
DCCTRL7, /* Cacheable write-back, allocate on writes only */
diff --git a/arch/arm/include/asm/kprobes.h b/arch/arm/include/asm/kprobes.h
index feec86768f9c967c946a74ff23ed898d6207543c..f82ec22eeb1174a3ba0b431da119868cd8a1d36d 100644
--- a/arch/arm/include/asm/kprobes.h
+++ b/arch/arm/include/asm/kprobes.h
@@ -24,7 +24,6 @@
#define MAX_INSN_SIZE 2
#define MAX_STACK_SIZE 64 /* 32 would probably be OK */
-#define regs_return_value(regs) ((regs)->ARM_r0)
#define flush_insn_slot(p) do { } while (0)
#define kretprobe_blacklist_size 0
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index ce280b8d613cbc7821a2adedfa32186988caf1e0..cb8d638924fd3d6f0abfa1a6dc589a755b3bc79b 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -22,6 +22,7 @@
#include
#include
#include
+#include
#ifdef __KERNEL__
#define STACK_TOP ((current->personality & ADDR_LIMIT_32BIT) ? \
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 96187ff58c247cf61953ff8d06922412f0acaca2..451808ba1211f2a547af60b35545b220d69886a9 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -189,6 +189,11 @@ static inline int valid_user_regs(struct pt_regs *regs)
return 0;
}
+static inline long regs_return_value(struct pt_regs *regs)
+{
+ return regs->ARM_r0;
+}
+
#define instruction_pointer(regs) (regs)->ARM_pc
#ifdef CONFIG_SMP
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index 1e5717afc4ac007e94447cf91ab88bdee9f7f1ad..ae29293270a3d8c298f5359c17ff64443882729d 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -70,12 +70,6 @@ extern void platform_secondary_init(unsigned int cpu);
*/
extern void platform_smp_prepare_cpus(unsigned int);
-/*
- * Logical CPU mapping.
- */
-extern int __cpu_logical_map[NR_CPUS];
-#define cpu_logical_map(cpu) __cpu_logical_map[cpu]
-
/*
* Initial data for bringing up a secondary CPU.
*/
diff --git a/arch/arm/include/asm/smp_plat.h b/arch/arm/include/asm/smp_plat.h
index f24c1b9e211dd180a6caf548260110a33f75b33c..558d6c80aca9cc292c5d3d50e99ee705535fe868 100644
--- a/arch/arm/include/asm/smp_plat.h
+++ b/arch/arm/include/asm/smp_plat.h
@@ -43,4 +43,10 @@ static inline int cache_ops_need_broadcast(void)
}
#endif
+/*
+ * Logical CPU mapping.
+ */
+extern int __cpu_logical_map[];
+#define cpu_logical_map(cpu) __cpu_logical_map[cpu]
+
#endif
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index 0f30c3a78fc10815668b56c2ae5789ea38b4fdd9..d4c24d412a8ddbdaba9f11a6217cd6a8b592c22c 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -129,6 +129,7 @@ extern void vfp_flush_hwstate(struct thread_info *);
/*
* thread information flags:
* TIF_SYSCALL_TRACE - syscall trace active
+ * TIF_SYSCAL_AUDIT - syscall auditing active
* TIF_SIGPENDING - signal pending
* TIF_NEED_RESCHED - rescheduling necessary
* TIF_NOTIFY_RESUME - callback before returning to user
@@ -139,6 +140,7 @@ extern void vfp_flush_hwstate(struct thread_info *);
#define TIF_NEED_RESCHED 1
#define TIF_NOTIFY_RESUME 2 /* callback before returning to user */
#define TIF_SYSCALL_TRACE 8
+#define TIF_SYSCALL_AUDIT 9
#define TIF_POLLING_NRFLAG 16
#define TIF_USING_IWMMXT 17
#define TIF_MEMDIE 18 /* is terminating due to OOM killer */
@@ -149,11 +151,15 @@ extern void vfp_flush_hwstate(struct thread_info *);
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
#define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT)
#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
#define _TIF_SECCOMP (1 << TIF_SECCOMP)
+/* Checks for any syscall work in entry-common.S */
+#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT)
+
/*
* Change these and you break ASM code in entry-common.S
*/
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 5d3ed7e38561dd43553d1d3bf1b2af07e0d2b747..314d4664eae7d9976a5fe656f74918cb8d15ab8b 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -198,7 +198,15 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
unsigned long addr)
{
pgtable_page_dtor(pte);
- tlb_add_flush(tlb, addr);
+
+ /*
+ * With the classic ARM MMU, a pte page has two corresponding pmd
+ * entries, each covering 1MB.
+ */
+ addr &= PMD_MASK;
+ tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE);
+ tlb_add_flush(tlb, addr + SZ_1M);
+
tlb_remove_page(tlb, pte);
}
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index b293616a1a1a8d6cf92a5ae1560994c7e3d66e46..2958976d867b4b9795a090cee9a6b9cacb646631 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -227,7 +227,7 @@ do { \
#define __get_user_asm_byte(x,addr,err) \
__asm__ __volatile__( \
- "1: " T(ldrb) " %1,[%2],#0\n" \
+ "1: " TUSER(ldrb) " %1,[%2],#0\n" \
"2:\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
@@ -263,7 +263,7 @@ do { \
#define __get_user_asm_word(x,addr,err) \
__asm__ __volatile__( \
- "1: " T(ldr) " %1,[%2],#0\n" \
+ "1: " TUSER(ldr) " %1,[%2],#0\n" \
"2:\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
@@ -308,7 +308,7 @@ do { \
#define __put_user_asm_byte(x,__pu_addr,err) \
__asm__ __volatile__( \
- "1: " T(strb) " %1,[%2],#0\n" \
+ "1: " TUSER(strb) " %1,[%2],#0\n" \
"2:\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
@@ -341,7 +341,7 @@ do { \
#define __put_user_asm_word(x,__pu_addr,err) \
__asm__ __volatile__( \
- "1: " T(str) " %1,[%2],#0\n" \
+ "1: " TUSER(str) " %1,[%2],#0\n" \
"2:\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
@@ -366,10 +366,10 @@ do { \
#define __put_user_asm_dword(x,__pu_addr,err) \
__asm__ __volatile__( \
- ARM( "1: " T(str) " " __reg_oper1 ", [%1], #4\n" ) \
- ARM( "2: " T(str) " " __reg_oper0 ", [%1]\n" ) \
- THUMB( "1: " T(str) " " __reg_oper1 ", [%1]\n" ) \
- THUMB( "2: " T(str) " " __reg_oper0 ", [%1, #4]\n" ) \
+ ARM( "1: " TUSER(str) " " __reg_oper1 ", [%1], #4\n" ) \
+ ARM( "2: " TUSER(str) " " __reg_oper0 ", [%1]\n" ) \
+ THUMB( "1: " TUSER(str) " " __reg_oper1 ", [%1]\n" ) \
+ THUMB( "2: " TUSER(str) " " __reg_oper0 ", [%1, #4]\n" ) \
"3:\n" \
" .pushsection .fixup,\"ax\"\n" \
" .align 2\n" \
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
index bc631161e9c6d29eb0f9e73d408da4ae4c13da0e..f5989f46b4d2d450f18b24faa946de750394ec13 100644
--- a/arch/arm/include/asm/unified.h
+++ b/arch/arm/include/asm/unified.h
@@ -37,8 +37,8 @@
#define THUMB(x...) x
#ifdef __ASSEMBLY__
#define W(instr) instr.w
-#endif
#define BSYM(sym) sym + 1
+#endif
#else /* !CONFIG_THUMB2_KERNEL */
@@ -49,8 +49,8 @@
#define THUMB(x...)
#ifdef __ASSEMBLY__
#define W(instr) instr
-#endif
#define BSYM(sym) sym
+#endif
#endif /* CONFIG_THUMB2_KERNEL */
diff --git a/arch/arm/kernel/entry-armv.S b/arch/arm/kernel/entry-armv.S
index 3a456c6c70056f9267f592792193d2176c045802..be16a48007b4b79fc5db0d3e48b016242b68d760 100644
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
@@ -790,7 +790,7 @@ __kuser_cmpxchg64: @ 0xffff0f60
smp_dmb arm
rsbs r0, r3, #0 @ set returned val and C flag
ldmfd sp!, {r4, r5, r6, r7}
- bx lr
+ usr_ret lr
#elif !defined(CONFIG_SMP)
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index b2a27b6b0046ee6c1e0f0928c3269ab5f6c63cd2..9fd0ba90c1d29ff78ed04ca80580e1c8be89cd0a 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -87,7 +87,7 @@ ENTRY(ret_from_fork)
get_thread_info tsk
ldr r1, [tsk, #TI_FLAGS] @ check for syscall tracing
mov why, #1
- tst r1, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
+ tst r1, #_TIF_SYSCALL_WORK @ are we tracing syscalls?
beq ret_slow_syscall
mov r1, sp
mov r0, #1 @ trace exit [IP = 1]
@@ -149,6 +149,11 @@ ENDPROC(ret_from_fork)
#endif
#endif
+.macro mcount_adjust_addr rd, rn
+ bic \rd, \rn, #1 @ clear the Thumb bit if present
+ sub \rd, \rd, #MCOUNT_INSN_SIZE
+.endm
+
.macro __mcount suffix
mcount_enter
ldr r0, =ftrace_trace_function
@@ -173,8 +178,7 @@ ENDPROC(ret_from_fork)
mcount_exit
1: mcount_get_lr r1 @ lr of instrumented func
- mov r0, lr @ instrumented function
- sub r0, r0, #MCOUNT_INSN_SIZE
+ mcount_adjust_addr r0, lr @ instrumented function
adr lr, BSYM(2f)
mov pc, r2
2: mcount_exit
@@ -184,8 +188,7 @@ ENDPROC(ret_from_fork)
mcount_enter
mcount_get_lr r1 @ lr of instrumented func
- mov r0, lr @ instrumented function
- sub r0, r0, #MCOUNT_INSN_SIZE
+ mcount_adjust_addr r0, lr @ instrumented function
.globl ftrace_call\suffix
ftrace_call\suffix:
@@ -205,11 +208,11 @@ ftrace_graph_call\suffix:
#ifdef CONFIG_DYNAMIC_FTRACE
@ called from __ftrace_caller, saved in mcount_enter
ldr r1, [sp, #16] @ instrumented routine (func)
+ mcount_adjust_addr r1, r1
#else
@ called from __mcount, untouched in lr
- mov r1, lr @ instrumented routine (func)
+ mcount_adjust_addr r1, lr @ instrumented routine (func)
#endif
- sub r1, r1, #MCOUNT_INSN_SIZE
mov r2, fp @ frame pointer
bl prepare_ftrace_return
mcount_exit
@@ -443,7 +446,7 @@ ENTRY(vector_swi)
1:
#endif
- tst r10, #_TIF_SYSCALL_TRACE @ are we tracing syscalls?
+ tst r10, #_TIF_SYSCALL_WORK @ are we tracing syscalls?
bne __sys_trace
cmp scno, #NR_syscalls @ check upper syscall limit
diff --git a/arch/arm/kernel/perf_event_v7.c b/arch/arm/kernel/perf_event_v7.c
index 460bbbb6b88536ba18ded4983b6ee18baf1a4bf4..6933244c68f964ffed73f11cfbdaac1ca13b2f74 100644
--- a/arch/arm/kernel/perf_event_v7.c
+++ b/arch/arm/kernel/perf_event_v7.c
@@ -469,6 +469,20 @@ static const unsigned armv7_a5_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
+ [C(NODE)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
};
/*
@@ -579,6 +593,20 @@ static const unsigned armv7_a15_perf_cache_map[PERF_COUNT_HW_CACHE_MAX]
[C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
},
},
+ [C(NODE)] = {
+ [C(OP_READ)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_WRITE)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ [C(OP_PREFETCH)] = {
+ [C(RESULT_ACCESS)] = CACHE_OP_UNSUPPORTED,
+ [C(RESULT_MISS)] = CACHE_OP_UNSUPPORTED,
+ },
+ },
};
/*
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index 483727ad68923a3e27af6d693c9132db0148af7f..ede6443c34d964670560f155aaf200ed6bf0949e 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -23,6 +23,7 @@
#include
#include
#include
+#include
#include
#include
@@ -699,10 +700,13 @@ static int vfp_set(struct task_struct *target,
{
int ret;
struct thread_info *thread = task_thread_info(target);
- struct vfp_hard_struct new_vfp = thread->vfpstate.hard;
+ struct vfp_hard_struct new_vfp;
const size_t user_fpregs_offset = offsetof(struct user_vfp, fpregs);
const size_t user_fpscr_offset = offsetof(struct user_vfp, fpscr);
+ vfp_sync_hwstate(thread);
+ new_vfp = thread->vfpstate.hard;
+
ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf,
&new_vfp.fpregs,
user_fpregs_offset,
@@ -723,9 +727,8 @@ static int vfp_set(struct task_struct *target,
if (ret)
return ret;
- vfp_sync_hwstate(thread);
- thread->vfpstate.hard = new_vfp;
vfp_flush_hwstate(thread);
+ thread->vfpstate.hard = new_vfp;
return 0;
}
@@ -902,15 +905,16 @@ long arch_ptrace(struct task_struct *child, long request,
return ret;
}
+#ifdef __ARMEB__
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARMEB
+#else
+#define AUDIT_ARCH_NR AUDIT_ARCH_ARM
+#endif
+
asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
{
unsigned long ip;
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
- return scno;
- if (!(current->ptrace & PT_PTRACED))
- return scno;
-
/*
* Save IP. IP is used to denote syscall entry/exit:
* IP = 0 -> entry, = 1 -> exit
@@ -918,6 +922,17 @@ asmlinkage int syscall_trace(int why, struct pt_regs *regs, int scno)
ip = regs->ARM_ip;
regs->ARM_ip = why;
+ if (!ip)
+ audit_syscall_exit(regs);
+ else
+ audit_syscall_entry(AUDIT_ARCH_NR, scno, regs->ARM_r0,
+ regs->ARM_r1, regs->ARM_r2, regs->ARM_r3);
+
+ if (!test_thread_flag(TIF_SYSCALL_TRACE))
+ return scno;
+ if (!(current->ptrace & PT_PTRACED))
+ return scno;
+
current_thread_info()->syscall = scno;
/* the 0x80 provides a way for the tracing parent to distinguish
diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
index 129fbd55bde85612de3900035f05fd8bd85cfeee..a255c39612ca3cfa10bddb7c7728216efeeb04d5 100644
--- a/arch/arm/kernel/setup.c
+++ b/arch/arm/kernel/setup.c
@@ -21,7 +21,6 @@
#include
#include
#include
-#include
#include
#include
#include
@@ -160,7 +159,7 @@ static struct resource mem_res[] = {
.flags = IORESOURCE_MEM
},
{
- .name = "Kernel text",
+ .name = "Kernel code",
.start = 0,
.end = 0,
.flags = IORESOURCE_MEM
@@ -427,6 +426,20 @@ void cpu_init(void)
: "r14");
}
+int __cpu_logical_map[NR_CPUS];
+
+void __init smp_setup_processor_id(void)
+{
+ int i;
+ u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
+
+ cpu_logical_map(0) = cpu;
+ for (i = 1; i < NR_CPUS; ++i)
+ cpu_logical_map(i) = i == cpu ? 0 : i;
+
+ printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
+}
+
static void __init setup_processor(void)
{
struct proc_info_list *list;
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 0340224cf73c5c9db2d16185bd698a6ba6518fb8..9e617bd4a146250d7d3f453d50a45431fa261e08 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -227,6 +227,8 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
if (magic != VFP_MAGIC || size != VFP_STORAGE_SIZE)
return -EINVAL;
+ vfp_flush_hwstate(thread);
+
/*
* Copy the floating point registers. There can be unused
* registers see asm/hwcap.h for details.
@@ -251,9 +253,6 @@ static int restore_vfp_context(struct vfp_sigframe __user *frame)
__get_user_error(h->fpinst, &frame->ufp_exc.fpinst, err);
__get_user_error(h->fpinst2, &frame->ufp_exc.fpinst2, err);
- if (!err)
- vfp_flush_hwstate(thread);
-
return err ? -EFAULT : 0;
}
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 57db122a4f629bb53247fde4f2b15076838661c0..cdeb727527d39768587ffa3dd9946073aeaa6853 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -233,20 +233,6 @@ void __ref cpu_die(void)
}
#endif /* CONFIG_HOTPLUG_CPU */
-int __cpu_logical_map[NR_CPUS];
-
-void __init smp_setup_processor_id(void)
-{
- int i;
- u32 cpu = is_smp() ? read_cpuid_mpidr() & 0xff : 0;
-
- cpu_logical_map(0) = cpu;
- for (i = 1; i < NR_CPUS; ++i)
- cpu_logical_map(i) = i == cpu ? 0 : i;
-
- printk(KERN_INFO "Booting Linux on physical CPU %d\n", cpu);
-}
-
/*
* Called by both boot and secondaries to move global data into
* per-processor storage.
@@ -443,9 +429,7 @@ static DEFINE_PER_CPU(struct clock_event_device, percpu_clockevent);
static void ipi_timer(void)
{
struct clock_event_device *evt = &__get_cpu_var(percpu_clockevent);
- irq_enter();
evt->event_handler(evt);
- irq_exit();
}
#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
@@ -548,7 +532,9 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
switch (ipinr) {
case IPI_TIMER:
+ irq_enter();
ipi_timer();
+ irq_exit();
break;
case IPI_RESCHEDULE:
@@ -556,15 +542,21 @@ void handle_IPI(int ipinr, struct pt_regs *regs)
break;
case IPI_CALL_FUNC:
+ irq_enter();
generic_smp_call_function_interrupt();
+ irq_exit();
break;
case IPI_CALL_FUNC_SINGLE:
+ irq_enter();
generic_smp_call_function_single_interrupt();
+ irq_exit();
break;
case IPI_CPU_STOP:
+ irq_enter();
ipi_cpu_stop(cpu);
+ irq_exit();
break;
default:
diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c
index c8e938553d478015d57d436ec43908b81b460d3a..7a79b24597b2d51953826338e13656803fe9c229 100644
--- a/arch/arm/kernel/smp_twd.c
+++ b/arch/arm/kernel/smp_twd.c
@@ -129,7 +129,7 @@ static struct notifier_block twd_cpufreq_nb = {
static int twd_cpufreq_init(void)
{
- if (!IS_ERR(twd_clk))
+ if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk))
return cpufreq_register_notifier(&twd_cpufreq_nb,
CPUFREQ_TRANSITION_NOTIFIER);
@@ -252,6 +252,8 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
else
twd_calibrate_rate();
+ __raw_writel(0, twd_base + TWD_TIMER_CONTROL);
+
clk->name = "local_timer";
clk->features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT |
CLOCK_EVT_FEAT_C3STOP;
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 99a57270250936ae69e02abd57b27b8a1c3dd022..f84dfe67724fa6e81e7975abfa08ad23a2ba3788 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -266,6 +266,7 @@ void die(const char *str, struct pt_regs *regs, int err)
{
struct thread_info *thread = current_thread_info();
int ret;
+ enum bug_trap_type bug_type = BUG_TRAP_TYPE_NONE;
oops_enter();
@@ -273,7 +274,9 @@ void die(const char *str, struct pt_regs *regs, int err)
console_verbose();
bust_spinlocks(1);
if (!user_mode(regs))
- report_bug(regs->ARM_pc, regs);
+ bug_type = report_bug(regs->ARM_pc, regs);
+ if (bug_type != BUG_TRAP_TYPE_NONE)
+ str = "Oops - BUG";
ret = __die(str, err, thread, regs);
if (regs && kexec_should_crash(thread->task))
diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S
index f76e75548670e97eeac9112a8e48b53e37f9cc91..43a31fb06318dc0a1213827a5069b73cac19f5a6 100644
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
@@ -4,11 +4,13 @@
*/
#include
+#include
#include
#include
#include
#define PROC_INFO \
+ . = ALIGN(4); \
VMLINUX_SYMBOL(__proc_info_begin) = .; \
*(.proc.info.init) \
VMLINUX_SYMBOL(__proc_info_end) = .;
@@ -181,7 +183,7 @@ SECTIONS
}
#endif
- PERCPU_SECTION(32)
+ PERCPU_SECTION(L1_CACHE_BYTES)
#ifdef CONFIG_XIP_KERNEL
__data_loc = ALIGN(4); /* location in binary */
@@ -212,13 +214,13 @@ SECTIONS
#endif
NOSAVE_DATA
- CACHELINE_ALIGNED_DATA(32)
- READ_MOSTLY_DATA(32)
+ CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
+ READ_MOSTLY_DATA(L1_CACHE_BYTES)
/*
* The exception fixup table (might need resorting at runtime)
*/
- . = ALIGN(32);
+ . = ALIGN(4);
__start___ex_table = .;
#ifdef CONFIG_MMU
*(__ex_table)
diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S
index 1b049cd7a49a8badab511ed2b0532d1f7e76b733..11093a7c3e32289e95a8c100cc01ef2bbb8d7101 100644
--- a/arch/arm/lib/getuser.S
+++ b/arch/arm/lib/getuser.S
@@ -31,18 +31,18 @@
#include
ENTRY(__get_user_1)
-1: T(ldrb) r2, [r0]
+1: TUSER(ldrb) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__get_user_1)
ENTRY(__get_user_2)
#ifdef CONFIG_THUMB2_KERNEL
-2: T(ldrb) r2, [r0]
-3: T(ldrb) r3, [r0, #1]
+2: TUSER(ldrb) r2, [r0]
+3: TUSER(ldrb) r3, [r0, #1]
#else
-2: T(ldrb) r2, [r0], #1
-3: T(ldrb) r3, [r0]
+2: TUSER(ldrb) r2, [r0], #1
+3: TUSER(ldrb) r3, [r0]
#endif
#ifndef __ARMEB__
orr r2, r2, r3, lsl #8
@@ -54,7 +54,7 @@ ENTRY(__get_user_2)
ENDPROC(__get_user_2)
ENTRY(__get_user_4)
-4: T(ldr) r2, [r0]
+4: TUSER(ldr) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__get_user_4)
diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S
index c023fc11e86c7b603eaaa08270e7ea429ecfab5f..7db25990c589f3d98554d9aee47cf7b5c3c486fd 100644
--- a/arch/arm/lib/putuser.S
+++ b/arch/arm/lib/putuser.S
@@ -31,7 +31,7 @@
#include
ENTRY(__put_user_1)
-1: T(strb) r2, [r0]
+1: TUSER(strb) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__put_user_1)
@@ -40,19 +40,19 @@ ENTRY(__put_user_2)
mov ip, r2, lsr #8
#ifdef CONFIG_THUMB2_KERNEL
#ifndef __ARMEB__
-2: T(strb) r2, [r0]
-3: T(strb) ip, [r0, #1]
+2: TUSER(strb) r2, [r0]
+3: TUSER(strb) ip, [r0, #1]
#else
-2: T(strb) ip, [r0]
-3: T(strb) r2, [r0, #1]
+2: TUSER(strb) ip, [r0]
+3: TUSER(strb) r2, [r0, #1]
#endif
#else /* !CONFIG_THUMB2_KERNEL */
#ifndef __ARMEB__
-2: T(strb) r2, [r0], #1
-3: T(strb) ip, [r0]
+2: TUSER(strb) r2, [r0], #1
+3: TUSER(strb) ip, [r0]
#else
-2: T(strb) ip, [r0], #1
-3: T(strb) r2, [r0]
+2: TUSER(strb) ip, [r0], #1
+3: TUSER(strb) r2, [r0]
#endif
#endif /* CONFIG_THUMB2_KERNEL */
mov r0, #0
@@ -60,18 +60,18 @@ ENTRY(__put_user_2)
ENDPROC(__put_user_2)
ENTRY(__put_user_4)
-4: T(str) r2, [r0]
+4: TUSER(str) r2, [r0]
mov r0, #0
mov pc, lr
ENDPROC(__put_user_4)
ENTRY(__put_user_8)
#ifdef CONFIG_THUMB2_KERNEL
-5: T(str) r2, [r0]
-6: T(str) r3, [r0, #4]
+5: TUSER(str) r2, [r0]
+6: TUSER(str) r3, [r0, #4]
#else
-5: T(str) r2, [r0], #4
-6: T(str) r3, [r0]
+5: TUSER(str) r2, [r0], #4
+6: TUSER(str) r3, [r0]
#endif
mov r0, #0
mov pc, lr
diff --git a/arch/arm/lib/uaccess.S b/arch/arm/lib/uaccess.S
index d0ece2aeb70dfc380d689a85a141a28a5917ec20..5c908b1cb8ed5db3eeabfb89f7f659f99d2d6f76 100644
--- a/arch/arm/lib/uaccess.S
+++ b/arch/arm/lib/uaccess.S
@@ -32,11 +32,11 @@
rsb ip, ip, #4
cmp ip, #2
ldrb r3, [r1], #1
-USER( T(strb) r3, [r0], #1) @ May fault
+USER( TUSER( strb) r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
-USER( T(strgeb) r3, [r0], #1) @ May fault
+USER( TUSER( strgeb) r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #1
-USER( T(strgtb) r3, [r0], #1) @ May fault
+USER( TUSER( strgtb) r3, [r0], #1) @ May fault
sub r2, r2, ip
b .Lc2u_dest_aligned
@@ -59,7 +59,7 @@ ENTRY(__copy_to_user)
addmi ip, r2, #4
bmi .Lc2u_0nowords
ldr r3, [r1], #4
-USER( T(str) r3, [r0], #4) @ May fault
+USER( TUSER( str) r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
@@ -88,18 +88,18 @@ USER( T(str) r3, [r0], #4) @ May fault
stmneia r0!, {r3 - r4} @ Shouldnt fault
tst ip, #4
ldrne r3, [r1], #4
- T(strne) r3, [r0], #4 @ Shouldnt fault
+ TUSER( strne) r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .Lc2u_0fupi
.Lc2u_0nowords: teq ip, #0
beq .Lc2u_finished
.Lc2u_nowords: cmp ip, #2
ldrb r3, [r1], #1
-USER( T(strb) r3, [r0], #1) @ May fault
+USER( TUSER( strb) r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
-USER( T(strgeb) r3, [r0], #1) @ May fault
+USER( TUSER( strgeb) r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #1
-USER( T(strgtb) r3, [r0], #1) @ May fault
+USER( TUSER( strgtb) r3, [r0], #1) @ May fault
b .Lc2u_finished
.Lc2u_not_enough:
@@ -120,7 +120,7 @@ USER( T(strgtb) r3, [r0], #1) @ May fault
mov r3, r7, pull #8
ldr r7, [r1], #4
orr r3, r3, r7, push #24
-USER( T(str) r3, [r0], #4) @ May fault
+USER( TUSER( str) r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
@@ -155,18 +155,18 @@ USER( T(str) r3, [r0], #4) @ May fault
movne r3, r7, pull #8
ldrne r7, [r1], #4
orrne r3, r3, r7, push #24
- T(strne) r3, [r0], #4 @ Shouldnt fault
+ TUSER( strne) r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .Lc2u_1fupi
.Lc2u_1nowords: mov r3, r7, get_byte_1
teq ip, #0
beq .Lc2u_finished
cmp ip, #2
-USER( T(strb) r3, [r0], #1) @ May fault
+USER( TUSER( strb) r3, [r0], #1) @ May fault
movge r3, r7, get_byte_2
-USER( T(strgeb) r3, [r0], #1) @ May fault
+USER( TUSER( strgeb) r3, [r0], #1) @ May fault
movgt r3, r7, get_byte_3
-USER( T(strgtb) r3, [r0], #1) @ May fault
+USER( TUSER( strgtb) r3, [r0], #1) @ May fault
b .Lc2u_finished
.Lc2u_2fupi: subs r2, r2, #4
@@ -175,7 +175,7 @@ USER( T(strgtb) r3, [r0], #1) @ May fault
mov r3, r7, pull #16
ldr r7, [r1], #4
orr r3, r3, r7, push #16
-USER( T(str) r3, [r0], #4) @ May fault
+USER( TUSER( str) r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
@@ -210,18 +210,18 @@ USER( T(str) r3, [r0], #4) @ May fault
movne r3, r7, pull #16
ldrne r7, [r1], #4
orrne r3, r3, r7, push #16
- T(strne) r3, [r0], #4 @ Shouldnt fault
+ TUSER( strne) r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .Lc2u_2fupi
.Lc2u_2nowords: mov r3, r7, get_byte_2
teq ip, #0
beq .Lc2u_finished
cmp ip, #2
-USER( T(strb) r3, [r0], #1) @ May fault
+USER( TUSER( strb) r3, [r0], #1) @ May fault
movge r3, r7, get_byte_3
-USER( T(strgeb) r3, [r0], #1) @ May fault
+USER( TUSER( strgeb) r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #0
-USER( T(strgtb) r3, [r0], #1) @ May fault
+USER( TUSER( strgtb) r3, [r0], #1) @ May fault
b .Lc2u_finished
.Lc2u_3fupi: subs r2, r2, #4
@@ -230,7 +230,7 @@ USER( T(strgtb) r3, [r0], #1) @ May fault
mov r3, r7, pull #24
ldr r7, [r1], #4
orr r3, r3, r7, push #8
-USER( T(str) r3, [r0], #4) @ May fault
+USER( TUSER( str) r3, [r0], #4) @ May fault
mov ip, r0, lsl #32 - PAGE_SHIFT
rsb ip, ip, #0
movs ip, ip, lsr #32 - PAGE_SHIFT
@@ -265,18 +265,18 @@ USER( T(str) r3, [r0], #4) @ May fault
movne r3, r7, pull #24
ldrne r7, [r1], #4
orrne r3, r3, r7, push #8
- T(strne) r3, [r0], #4 @ Shouldnt fault
+ TUSER( strne) r3, [r0], #4 @ Shouldnt fault
ands ip, ip, #3
beq .Lc2u_3fupi
.Lc2u_3nowords: mov r3, r7, get_byte_3
teq ip, #0
beq .Lc2u_finished
cmp ip, #2
-USER( T(strb) r3, [r0], #1) @ May fault
+USER( TUSER( strb) r3, [r0], #1) @ May fault
ldrgeb r3, [r1], #1
-USER( T(strgeb) r3, [r0], #1) @ May fault
+USER( TUSER( strgeb) r3, [r0], #1) @ May fault
ldrgtb r3, [r1], #0
-USER( T(strgtb) r3, [r0], #1) @ May fault
+USER( TUSER( strgtb) r3, [r0], #1) @ May fault
b .Lc2u_finished
ENDPROC(__copy_to_user)
@@ -295,11 +295,11 @@ ENDPROC(__copy_to_user)
.Lcfu_dest_not_aligned:
rsb ip, ip, #4
cmp ip, #2
-USER( T(ldrb) r3, [r1], #1) @ May fault
+USER( TUSER( ldrb) r3, [r1], #1) @ May fault
strb r3, [r0], #1
-USER( T(ldrgeb) r3, [r1], #1) @ May fault
+USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
-USER( T(ldrgtb) r3, [r1], #1) @ May fault
+USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
sub r2, r2, ip
b .Lcfu_dest_aligned
@@ -322,7 +322,7 @@ ENTRY(__copy_from_user)
.Lcfu_0fupi: subs r2, r2, #4
addmi ip, r2, #4
bmi .Lcfu_0nowords
-USER( T(ldr) r3, [r1], #4)
+USER( TUSER( ldr) r3, [r1], #4)
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT @ On each page, use a ld/st??t instruction
rsb ip, ip, #0
@@ -351,18 +351,18 @@ USER( T(ldr) r3, [r1], #4)
ldmneia r1!, {r3 - r4} @ Shouldnt fault
stmneia r0!, {r3 - r4}
tst ip, #4
- T(ldrne) r3, [r1], #4 @ Shouldnt fault
+ TUSER( ldrne) r3, [r1], #4 @ Shouldnt fault
strne r3, [r0], #4
ands ip, ip, #3
beq .Lcfu_0fupi
.Lcfu_0nowords: teq ip, #0
beq .Lcfu_finished
.Lcfu_nowords: cmp ip, #2
-USER( T(ldrb) r3, [r1], #1) @ May fault
+USER( TUSER( ldrb) r3, [r1], #1) @ May fault
strb r3, [r0], #1
-USER( T(ldrgeb) r3, [r1], #1) @ May fault
+USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
-USER( T(ldrgtb) r3, [r1], #1) @ May fault
+USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
b .Lcfu_finished
@@ -375,7 +375,7 @@ USER( T(ldrgtb) r3, [r1], #1) @ May fault
.Lcfu_src_not_aligned:
bic r1, r1, #3
-USER( T(ldr) r7, [r1], #4) @ May fault
+USER( TUSER( ldr) r7, [r1], #4) @ May fault
cmp ip, #2
bgt .Lcfu_3fupi
beq .Lcfu_2fupi
@@ -383,7 +383,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault
addmi ip, r2, #4
bmi .Lcfu_1nowords
mov r3, r7, pull #8
-USER( T(ldr) r7, [r1], #4) @ May fault
+USER( TUSER( ldr) r7, [r1], #4) @ May fault
orr r3, r3, r7, push #24
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT
@@ -418,7 +418,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault
stmneia r0!, {r3 - r4}
tst ip, #4
movne r3, r7, pull #8
-USER( T(ldrne) r7, [r1], #4) @ May fault
+USER( TUSER( ldrne) r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #24
strne r3, [r0], #4
ands ip, ip, #3
@@ -438,7 +438,7 @@ USER( T(ldrne) r7, [r1], #4) @ May fault
addmi ip, r2, #4
bmi .Lcfu_2nowords
mov r3, r7, pull #16
-USER( T(ldr) r7, [r1], #4) @ May fault
+USER( TUSER( ldr) r7, [r1], #4) @ May fault
orr r3, r3, r7, push #16
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT
@@ -474,7 +474,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault
stmneia r0!, {r3 - r4}
tst ip, #4
movne r3, r7, pull #16
-USER( T(ldrne) r7, [r1], #4) @ May fault
+USER( TUSER( ldrne) r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #16
strne r3, [r0], #4
ands ip, ip, #3
@@ -486,7 +486,7 @@ USER( T(ldrne) r7, [r1], #4) @ May fault
strb r3, [r0], #1
movge r3, r7, get_byte_3
strgeb r3, [r0], #1
-USER( T(ldrgtb) r3, [r1], #0) @ May fault
+USER( TUSER( ldrgtb) r3, [r1], #0) @ May fault
strgtb r3, [r0], #1
b .Lcfu_finished
@@ -494,7 +494,7 @@ USER( T(ldrgtb) r3, [r1], #0) @ May fault
addmi ip, r2, #4
bmi .Lcfu_3nowords
mov r3, r7, pull #24
-USER( T(ldr) r7, [r1], #4) @ May fault
+USER( TUSER( ldr) r7, [r1], #4) @ May fault
orr r3, r3, r7, push #8
str r3, [r0], #4
mov ip, r1, lsl #32 - PAGE_SHIFT
@@ -529,7 +529,7 @@ USER( T(ldr) r7, [r1], #4) @ May fault
stmneia r0!, {r3 - r4}
tst ip, #4
movne r3, r7, pull #24
-USER( T(ldrne) r7, [r1], #4) @ May fault
+USER( TUSER( ldrne) r7, [r1], #4) @ May fault
orrne r3, r3, r7, push #8
strne r3, [r0], #4
ands ip, ip, #3
@@ -539,9 +539,9 @@ USER( T(ldrne) r7, [r1], #4) @ May fault
beq .Lcfu_finished
cmp ip, #2
strb r3, [r0], #1
-USER( T(ldrgeb) r3, [r1], #1) @ May fault
+USER( TUSER( ldrgeb) r3, [r1], #1) @ May fault
strgeb r3, [r0], #1
-USER( T(ldrgtb) r3, [r1], #1) @ May fault
+USER( TUSER( ldrgtb) r3, [r1], #1) @ May fault
strgtb r3, [r0], #1
b .Lcfu_finished
ENDPROC(__copy_from_user)
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 4f991f2952846fb89d36be0758c255a4014b575a..71feb00a1e995de0991b54189569b04c1cf02f06 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -18,6 +18,12 @@ config HAVE_AT91_USART4
config HAVE_AT91_USART5
bool
+config AT91_SAM9_ALT_RESET
+ bool
+
+config AT91_SAM9G45_RESET
+ bool
+
menu "Atmel AT91 System-on-Chip"
choice
@@ -39,6 +45,7 @@ config ARCH_AT91SAM9260
select HAVE_AT91_USART4
select HAVE_AT91_USART5
select HAVE_NET_MACB
+ select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9261
bool "AT91SAM9261"
@@ -46,6 +53,7 @@ config ARCH_AT91SAM9261
select GENERIC_CLOCKEVENTS
select HAVE_FB_ATMEL
select HAVE_AT91_DBGU0
+ select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9G10
bool "AT91SAM9G10"
@@ -53,6 +61,7 @@ config ARCH_AT91SAM9G10
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
select HAVE_FB_ATMEL
+ select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9263
bool "AT91SAM9263"
@@ -61,6 +70,7 @@ config ARCH_AT91SAM9263
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select HAVE_AT91_DBGU1
+ select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9RL
bool "AT91SAM9RL"
@@ -69,6 +79,7 @@ config ARCH_AT91SAM9RL
select HAVE_AT91_USART3
select HAVE_FB_ATMEL
select HAVE_AT91_DBGU0
+ select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9G20
bool "AT91SAM9G20"
@@ -79,6 +90,7 @@ config ARCH_AT91SAM9G20
select HAVE_AT91_USART4
select HAVE_AT91_USART5
select HAVE_NET_MACB
+ select AT91_SAM9_ALT_RESET
config ARCH_AT91SAM9G45
bool "AT91SAM9G45"
@@ -88,6 +100,7 @@ config ARCH_AT91SAM9G45
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select HAVE_AT91_DBGU1
+ select AT91_SAM9G45_RESET
config ARCH_AT91CAP9
bool "AT91CAP9"
@@ -96,6 +109,7 @@ config ARCH_AT91CAP9
select HAVE_FB_ATMEL
select HAVE_NET_MACB
select HAVE_AT91_DBGU1
+ select AT91_SAM9G45_RESET
config ARCH_AT91X40
bool "AT91x40"
diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
index 242174f9f3554c6323075229eceef94a9f759225..705e1fbded3919112efb5858ec921d49e05d1eaa 100644
--- a/arch/arm/mach-at91/Makefile
+++ b/arch/arm/mach-at91/Makefile
@@ -8,15 +8,17 @@ obj-n :=
obj- :=
obj-$(CONFIG_AT91_PMC_UNIT) += clock.o
+obj-$(CONFIG_AT91_SAM9_ALT_RESET) += at91sam9_alt_reset.o
+obj-$(CONFIG_AT91_SAM9G45_RESET) += at91sam9g45_reset.o
# CPU-specific support
obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o at91sam9_alt_reset.o
-obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o at91sam9_alt_reset.o
+obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G10) += at91sam9261.o at91sam926x_time.o at91sam9261_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263.o at91sam926x_time.o at91sam9263_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl.o at91sam926x_time.o at91sam9rl_devices.o sam9_smc.o
+obj-$(CONFIG_ARCH_AT91SAM9G20) += at91sam9260.o at91sam926x_time.o at91sam9260_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45.o at91sam926x_time.o at91sam9g45_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91CAP9) += at91cap9.o at91sam926x_time.o at91cap9_devices.o sam9_smc.o
obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
diff --git a/arch/arm/mach-at91/at91cap9.c b/arch/arm/mach-at91/at91cap9.c
index edb879ac04c8e30c3d2b814f24497ae86075e7be..a42edc25a87e693aea85b2b494515c14e4d32c42 100644
--- a/arch/arm/mach-at91/at91cap9.c
+++ b/arch/arm/mach-at91/at91cap9.c
@@ -21,7 +21,6 @@
#include
#include
#include
-#include
#include "soc.h"
#include "generic.h"
@@ -314,11 +313,6 @@ static struct at91_gpio_bank at91cap9_gpio[] __initdata = {
}
};
-static void at91cap9_restart(char mode, const char *cmd)
-{
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
/* --------------------------------------------------------------------
* AT91CAP9 processor initialization
* -------------------------------------------------------------------- */
@@ -331,13 +325,14 @@ static void __init at91cap9_map_io(void)
static void __init at91cap9_ioremap_registers(void)
{
at91_ioremap_shdwc(AT91CAP9_BASE_SHDWC);
+ at91_ioremap_rstc(AT91CAP9_BASE_RSTC);
at91sam926x_ioremap_pit(AT91CAP9_BASE_PIT);
at91sam9_ioremap_smc(0, AT91CAP9_BASE_SMC);
}
static void __init at91cap9_initialize(void)
{
- arm_pm_restart = at91cap9_restart;
+ arm_pm_restart = at91sam9g45_restart;
at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1);
/* Register GPIO subsystem */
diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c
index 18bacec2b094c202bc9dd60be5b69be0c56a683f..97676bdae9983c98b79f77cb85dd88e833756789 100644
--- a/arch/arm/mach-at91/at91rm9200_devices.c
+++ b/arch/arm/mach-at91/at91rm9200_devices.c
@@ -83,7 +83,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c
index 5e46e4a96430d90e793343115cbce42001e5cecc..d4036ba43612afe85f7b74ce58f55ae35e1882d0 100644
--- a/arch/arm/mach-at91/at91sam9260.c
+++ b/arch/arm/mach-at91/at91sam9260.c
@@ -323,6 +323,7 @@ static void __init at91sam9260_map_io(void)
static void __init at91sam9260_ioremap_registers(void)
{
at91_ioremap_shdwc(AT91SAM9260_BASE_SHDWC);
+ at91_ioremap_rstc(AT91SAM9260_BASE_RSTC);
at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
}
diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
index 642ccb6d26b256f284388080f71b68e5494e8070..5a24f0b4554db2b7e4ea50e620b464e2e9b9363a 100644
--- a/arch/arm/mach-at91/at91sam9260_devices.c
+++ b/arch/arm/mach-at91/at91sam9260_devices.c
@@ -84,7 +84,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
@@ -1215,8 +1215,7 @@ void __init at91_add_device_serial(void) {}
* CF/IDE
* -------------------------------------------------------------------- */
-#if defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE) || \
- defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
static struct at91_cf_data cf0_data;
@@ -1313,10 +1312,8 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
if (data->flags & AT91_CF_TRUE_IDE)
#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE)
pdev->name = "pata_at91";
-#elif defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
- pdev->name = "at91_ide";
#else
-#warning "board requires AT91_CF_TRUE_IDE: enable either at91_ide or pata_at91"
+#warning "board requires AT91_CF_TRUE_IDE: enable pata_at91"
#endif
else
pdev->name = "at91_cf";
diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c
index b85b9ea6017071252a670fdb6e22cb222336055d..023c2ff138df8a9228b4cb45c514d6e02f938918 100644
--- a/arch/arm/mach-at91/at91sam9261.c
+++ b/arch/arm/mach-at91/at91sam9261.c
@@ -281,6 +281,7 @@ static void __init at91sam9261_map_io(void)
static void __init at91sam9261_ioremap_registers(void)
{
at91_ioremap_shdwc(AT91SAM9261_BASE_SHDWC);
+ at91_ioremap_rstc(AT91SAM9261_BASE_RSTC);
at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
}
diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c
index fc59cbdb0e3cfcc777e3fe231bf8c525c2457198..1e28bed8f425063e99af8ac417035e5e6d01900f 100644
--- a/arch/arm/mach-at91/at91sam9261_devices.c
+++ b/arch/arm/mach-at91/at91sam9261_devices.c
@@ -87,7 +87,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c
index 79e3669b1117cbdf7ae18fd685647625766da513..75e876c258afed33b87ba50ccdb8dafee2523d79 100644
--- a/arch/arm/mach-at91/at91sam9263.c
+++ b/arch/arm/mach-at91/at91sam9263.c
@@ -301,6 +301,7 @@ static void __init at91sam9263_map_io(void)
static void __init at91sam9263_ioremap_registers(void)
{
at91_ioremap_shdwc(AT91SAM9263_BASE_SHDWC);
+ at91_ioremap_rstc(AT91SAM9263_BASE_RSTC);
at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c
index 7b46b2787022e85729e4d39ade77d667c5110e66..366a7765635b380538c103e3c0027519550521d0 100644
--- a/arch/arm/mach-at91/at91sam9263_devices.c
+++ b/arch/arm/mach-at91/at91sam9263_devices.c
@@ -92,7 +92,7 @@ void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
* USB Device (Gadget)
* -------------------------------------------------------------------- */
-#ifdef CONFIG_USB_AT91
+#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
static struct at91_udc_data udc_data;
static struct resource udc_resources[] = {
@@ -355,8 +355,8 @@ void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data) {}
* Compact Flash (PCMCIA or IDE)
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE) || \
- defined(CONFIG_BLK_DEV_IDE_AT91) || defined(CONFIG_BLK_DEV_IDE_AT91_MODULE)
+#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
+ defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
static struct at91_cf_data cf0_data;
@@ -450,7 +450,7 @@ void __init at91_add_device_cf(struct at91_cf_data *data)
at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */
at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
- pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "at91_ide" : "at91_cf";
+ pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf";
platform_device_register(pdev);
}
#else
diff --git a/arch/arm/mach-at91/at91sam9_alt_reset.S b/arch/arm/mach-at91/at91sam9_alt_reset.S
index d3f931c5942e9078bcb31803e50a6fefed398c8b..518e42377171c8fb25e5888c8863f7b363721a99 100644
--- a/arch/arm/mach-at91/at91sam9_alt_reset.S
+++ b/arch/arm/mach-at91/at91sam9_alt_reset.S
@@ -23,7 +23,8 @@
.globl at91sam9_alt_restart
at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants
- ldr r1, .at91_va_base_rstc_cr
+ ldr r1, =at91_rstc_base
+ ldr r1, [r1]
mov r2, #1
mov r3, #AT91_SDRAMC_LPCB_POWER_DOWN
@@ -33,11 +34,9 @@ at91sam9_alt_restart: ldr r0, .at91_va_base_sdramc @ preload constants
str r2, [r0, #AT91_SDRAMC_TR] @ disable SDRAM access
str r3, [r0, #AT91_SDRAMC_LPR] @ power down SDRAM
- str r4, [r1] @ reset processor
+ str r4, [r1, #AT91_RSTC_CR] @ reset processor
b .
.at91_va_base_sdramc:
.word AT91_VA_BASE_SYS + AT91_SDRAMC0
-.at91_va_base_rstc_cr:
- .word AT91_VA_BASE_SYS + AT91_RSTC_CR
diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c
index 7032dd32cdf0fbc207dc265958e70faeb1e32143..1cb6a96b1c1e3a7ec44cbde4129992b1f54da5eb 100644
--- a/arch/arm/mach-at91/at91sam9g45.c
+++ b/arch/arm/mach-at91/at91sam9g45.c
@@ -18,7 +18,6 @@
#include
#include
#include
-#include
#include
#include "soc.h"
@@ -318,11 +317,6 @@ static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
}
};
-static void at91sam9g45_restart(char mode, const char *cmd)
-{
- at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST);
-}
-
/* --------------------------------------------------------------------
* AT91SAM9G45 processor initialization
* -------------------------------------------------------------------- */
@@ -336,6 +330,7 @@ static void __init at91sam9g45_map_io(void)
static void __init at91sam9g45_ioremap_registers(void)
{
at91_ioremap_shdwc(AT91SAM9G45_BASE_SHDWC);
+ at91_ioremap_rstc(AT91SAM9G45_BASE_RSTC);
at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
}
diff --git a/arch/arm/mach-at91/at91sam9g45_reset.S b/arch/arm/mach-at91/at91sam9g45_reset.S
new file mode 100644
index 0000000000000000000000000000000000000000..0468be10980b57dce18e057817cf3879fb39a545
--- /dev/null
+++ b/arch/arm/mach-at91/at91sam9g45_reset.S
@@ -0,0 +1,40 @@
+/*
+ * reset AT91SAM9G45 as per errata
+ *
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD
+ *
+ * unless the SDRAM is cleanly shutdown before we hit the
+ * reset register it can be left driving the data bus and
+ * killing the chance of a subsequent boot from NAND
+ *
+ * GPLv2 Only
+ */
+
+#include
+#include
+#include
+#include
+
+ .arm
+
+ .globl at91sam9g45_restart
+
+at91sam9g45_restart:
+ ldr r0, .at91_va_base_sdramc0 @ preload constants
+ ldr r1, =at91_rstc_base
+ ldr r1, [r1]
+
+ mov r2, #1
+ mov r3, #AT91_DDRSDRC_LPCB_POWER_DOWN
+ ldr r4, =AT91_RSTC_KEY | AT91_RSTC_PERRST | AT91_RSTC_PROCRST
+
+ .balign 32 @ align to cache line
+
+ str r2, [r0, #AT91_DDRSDRC_RTR] @ disable DDR0 access
+ str r3, [r0, #AT91_DDRSDRC_LPR] @ power down DDR0
+ str r4, [r1, #AT91_RSTC_CR] @ reset processor
+
+ b .
+
+.at91_va_base_sdramc0:
+ .word AT91_VA_BASE_SYS + AT91_DDRSDRC0
diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c
index d6bcb1da11dfbc004d0c59890d60fef8d3dde27f..d2c91a841cb8c5fe73b1d5a6682e9d6626cb4f74 100644
--- a/arch/arm/mach-at91/at91sam9rl.c
+++ b/arch/arm/mach-at91/at91sam9rl.c
@@ -286,6 +286,7 @@ static void __init at91sam9rl_map_io(void)
static void __init at91sam9rl_ioremap_registers(void)
{
at91_ioremap_shdwc(AT91SAM9RL_BASE_SHDWC);
+ at91_ioremap_rstc(AT91SAM9RL_BASE_RSTC);
at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
}
diff --git a/arch/arm/mach-at91/generic.h b/arch/arm/mach-at91/generic.h
index 4866b8180d66610d17d6a0576424e19a751995a0..594133451c0c88498d50d30b223f22341c132cb2 100644
--- a/arch/arm/mach-at91/generic.h
+++ b/arch/arm/mach-at91/generic.h
@@ -58,7 +58,9 @@ extern void at91_irq_suspend(void);
extern void at91_irq_resume(void);
/* reset */
+extern void at91_ioremap_rstc(u32 base_addr);
extern void at91sam9_alt_restart(char, const char *);
+extern void at91sam9g45_restart(char, const char *);
/* shutdown */
extern void at91_ioremap_shdwc(u32 base_addr);
diff --git a/arch/arm/mach-at91/include/mach/at91_rstc.h b/arch/arm/mach-at91/include/mach/at91_rstc.h
index cbd2bf052c1f0e64937146e48ed5521f321d0c75..875fa336800ba3848b04362fe0db4caa73cb4865 100644
--- a/arch/arm/mach-at91/include/mach/at91_rstc.h
+++ b/arch/arm/mach-at91/include/mach/at91_rstc.h
@@ -16,13 +16,25 @@
#ifndef AT91_RSTC_H
#define AT91_RSTC_H
-#define AT91_RSTC_CR (AT91_RSTC + 0x00) /* Reset Controller Control Register */
+#ifndef __ASSEMBLY__
+extern void __iomem *at91_rstc_base;
+
+#define at91_rstc_read(field) \
+ __raw_readl(at91_rstc_base + field)
+
+#define at91_rstc_write(field, value) \
+ __raw_writel(value, at91_rstc_base + field);
+#else
+.extern at91_rstc_base
+#endif
+
+#define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */
#define AT91_RSTC_PROCRST (1 << 0) /* Processor Reset */
#define AT91_RSTC_PERRST (1 << 2) /* Peripheral Reset */
#define AT91_RSTC_EXTRST (1 << 3) /* External Reset */
#define AT91_RSTC_KEY (0xa5 << 24) /* KEY Password */
-#define AT91_RSTC_SR (AT91_RSTC + 0x04) /* Reset Controller Status Register */
+#define AT91_RSTC_SR 0x04 /* Reset Controller Status Register */
#define AT91_RSTC_URSTS (1 << 0) /* User Reset Status */
#define AT91_RSTC_RSTTYP (7 << 8) /* Reset Type */
#define AT91_RSTC_RSTTYP_GENERAL (0 << 8)
@@ -33,7 +45,7 @@
#define AT91_RSTC_NRSTL (1 << 16) /* NRST Pin Level */
#define AT91_RSTC_SRCMP (1 << 17) /* Software Reset Command in Progress */
-#define AT91_RSTC_MR (AT91_RSTC + 0x08) /* Reset Controller Mode Register */
+#define AT91_RSTC_MR 0x08 /* Reset Controller Mode Register */
#define AT91_RSTC_URSTEN (1 << 0) /* User Reset Enable */
#define AT91_RSTC_URSTIEN (1 << 4) /* User Reset Interrupt Enable */
#define AT91_RSTC_ERSTL (0xf << 8) /* External Reset Length */
diff --git a/arch/arm/mach-at91/include/mach/at91cap9.h b/arch/arm/mach-at91/include/mach/at91cap9.h
index 4c0e2f6011d70cc2ef93c349e70d02d9fc740065..61d952902f2b7ebe3a76ac3c1d40abe44c1f1282 100644
--- a/arch/arm/mach-at91/include/mach/at91cap9.h
+++ b/arch/arm/mach-at91/include/mach/at91cap9.h
@@ -83,7 +83,6 @@
#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
#define AT91_GPBR (cpu_is_at91cap9_revB() ? \
(0xfffffd50 - AT91_BASE_SYS) : \
(0xfffffd60 - AT91_BASE_SYS))
@@ -96,6 +95,7 @@
#define AT91CAP9_BASE_PIOB 0xfffff400
#define AT91CAP9_BASE_PIOC 0xfffff600
#define AT91CAP9_BASE_PIOD 0xfffff800
+#define AT91CAP9_BASE_RSTC 0xfffffd00
#define AT91CAP9_BASE_SHDWC 0xfffffd10
#define AT91CAP9_BASE_RTT 0xfffffd20
#define AT91CAP9_BASE_PIT 0xfffffd30
diff --git a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
deleted file mode 100644
index 976f4a6c33532e85e6a8053df737cf638c820827..0000000000000000000000000000000000000000
--- a/arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
+++ /dev/null
@@ -1,108 +0,0 @@
-/*
- * arch/arm/mach-at91/include/mach/at91cap9_ddrsdr.h
- *
- * (C) 2008 Andrew Victor
- *
- * DDR/SDR Controller (DDRSDRC) - System peripherals registers.
- * Based on AT91CAP9 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91CAP9_DDRSDR_H
-#define AT91CAP9_DDRSDR_H
-
-#define AT91_DDRSDRC_MR 0x00 /* Mode Register */
-#define AT91_DDRSDRC_MODE (0xf << 0) /* Command Mode */
-#define AT91_DDRSDRC_MODE_NORMAL 0
-#define AT91_DDRSDRC_MODE_NOP 1
-#define AT91_DDRSDRC_MODE_PRECHARGE 2
-#define AT91_DDRSDRC_MODE_LMR 3
-#define AT91_DDRSDRC_MODE_REFRESH 4
-#define AT91_DDRSDRC_MODE_EXT_LMR 5
-#define AT91_DDRSDRC_MODE_DEEP 6
-
-#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */
-#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-
-#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */
-#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
-#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
-#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
-#define AT91_DDRSDRC_NC_SDR10 (2 << 0)
-#define AT91_DDRSDRC_NC_SDR11 (3 << 0)
-#define AT91_DDRSDRC_NC_DDR9 (0 << 0)
-#define AT91_DDRSDRC_NC_DDR10 (1 << 0)
-#define AT91_DDRSDRC_NC_DDR11 (2 << 0)
-#define AT91_DDRSDRC_NC_DDR12 (3 << 0)
-#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */
-#define AT91_DDRSDRC_NR_11 (0 << 2)
-#define AT91_DDRSDRC_NR_12 (1 << 2)
-#define AT91_DDRSDRC_NR_13 (2 << 2)
-#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */
-#define AT91_DDRSDRC_CAS_2 (2 << 4)
-#define AT91_DDRSDRC_CAS_3 (3 << 4)
-#define AT91_DDRSDRC_CAS_25 (6 << 4)
-#define AT91_DDRSDRC_DLL (1 << 7) /* Reset DLL */
-#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
-
-#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */
-#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
-#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
-#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
-#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */
-#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
-#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
-#define AT91_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
-#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
-
-#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */
-#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
-#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
-#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
-#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
-
-#define AT91_DDRSDRC_LPR 0x18 /* Low Power Register */
-#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
-#define AT91_DDRSDRC_LPCB_DISABLE 0
-#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
-#define AT91_DDRSDRC_LPCB_POWER_DOWN 2
-#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
-#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
-#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
-#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
-#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
-#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
-#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12)
-#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
-#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-
-#define AT91_DDRSDRC_MDR 0x1C /* Memory Device Register */
-#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
-#define AT91_DDRSDRC_MD_SDR 0
-#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
-#define AT91_DDRSDRC_MD_DDR 2
-#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
-
-#define AT91_DDRSDRC_DLLR 0x20 /* DLL Information Register */
-#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
-#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
-#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
-#define AT91_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */
-#define AT91_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */
-#define AT91_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */
-#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
-#define AT91_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
-#define AT91_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
-
-/* Register access macros */
-#define at91_ramc_read(num, reg) \
- at91_sys_read(AT91_DDRSDRC##num + reg)
-#define at91_ramc_write(num, reg, value) \
- at91_sys_write(AT91_DDRSDRC##num + reg, value)
-
-
-#endif
diff --git a/arch/arm/mach-at91/include/mach/at91sam9260.h b/arch/arm/mach-at91/include/mach/at91sam9260.h
index f937c476bb67d6a584b08b122178caa0979cb405..fa5ca278adebf726a2cf849e162e33a82bc101b6 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9260.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9260.h
@@ -83,7 +83,6 @@
#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
#define AT91SAM9260_BASE_ECC 0xffffe800
@@ -92,6 +91,7 @@
#define AT91SAM9260_BASE_PIOA 0xfffff400
#define AT91SAM9260_BASE_PIOB 0xfffff600
#define AT91SAM9260_BASE_PIOC 0xfffff800
+#define AT91SAM9260_BASE_RSTC 0xfffffd00
#define AT91SAM9260_BASE_SHDWC 0xfffffd10
#define AT91SAM9260_BASE_RTT 0xfffffd20
#define AT91SAM9260_BASE_PIT 0xfffffd30
diff --git a/arch/arm/mach-at91/include/mach/at91sam9261.h b/arch/arm/mach-at91/include/mach/at91sam9261.h
index 175604e261becd42ba06aa5b7dc9150cf3eb7fb1..7cde2d36570eeee50049e54ff4a2f61ac853a69c 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9261.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9261.h
@@ -68,7 +68,6 @@
#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd50 - AT91_BASE_SYS)
#define AT91SAM9261_BASE_SMC 0xffffec00
@@ -76,6 +75,7 @@
#define AT91SAM9261_BASE_PIOA 0xfffff400
#define AT91SAM9261_BASE_PIOB 0xfffff600
#define AT91SAM9261_BASE_PIOC 0xfffff800
+#define AT91SAM9261_BASE_RSTC 0xfffffd00
#define AT91SAM9261_BASE_SHDWC 0xfffffd10
#define AT91SAM9261_BASE_RTT 0xfffffd20
#define AT91SAM9261_BASE_PIT 0xfffffd30
diff --git a/arch/arm/mach-at91/include/mach/at91sam9263.h b/arch/arm/mach-at91/include/mach/at91sam9263.h
index 80c915002d835a91e87d420efdb1c2ac422a8803..5949abda962b2affffaa44c59bfbf4e7138e610f 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9263.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9263.h
@@ -78,7 +78,6 @@
#define AT91_SDRAMC1 (0xffffe800 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffec00 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
#define AT91SAM9263_BASE_ECC0 0xffffe000
@@ -91,6 +90,7 @@
#define AT91SAM9263_BASE_PIOC 0xfffff600
#define AT91SAM9263_BASE_PIOD 0xfffff800
#define AT91SAM9263_BASE_PIOE 0xfffffa00
+#define AT91SAM9263_BASE_RSTC 0xfffffd00
#define AT91SAM9263_BASE_SHDWC 0xfffffd10
#define AT91SAM9263_BASE_RTT0 0xfffffd20
#define AT91SAM9263_BASE_PIT 0xfffffd30
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
index d27b15ba8ebf81c74792c6b0cd2f5a12f33cb664..e2f8da8ce5bc81f8b0447b0529c5b9338d5c447f 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_ddrsdr.h
@@ -46,10 +46,10 @@
#define AT91_DDRSDRC_CAS_25 (6 << 4)
#define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */
#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
-#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL */
-#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver */
-#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared */
-#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y */
+#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL [SAM9 Only] */
+#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver [SAM9 Only] */
+#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared [SAM9 Only] */
+#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */
#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */
#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
@@ -59,7 +59,8 @@
#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
#define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */
-#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay */
+#define AT91CAP9_DDRSDRC_TWTR (1 << 24) /* Internal Write to Read delay */
+#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */
#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */
@@ -68,13 +69,14 @@
#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
-#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register */
+#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register [SAM9 Only] */
#define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */
#define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */
#define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */
#define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */
#define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */
+#define AT91CAP9_DDRSDRC_LPR 0x18 /* Low Power Register */
#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
#define AT91_DDRSDRC_LPCB_DISABLE 0
#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
@@ -92,32 +94,40 @@
#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */
#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */
+#define AT91CAP9_DDRSDRC_MDR 0x1C /* Memory Device Register */
#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
#define AT91_DDRSDRC_MD_SDR 0
#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
+#define AT91CAP9_DDRSDRC_MD_DDR 2
#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
-#define AT91_DDRSDRC_MD_DDR2 6
+#define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */
#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */
#define AT91_DDRSDRC_DBW_32BITS (0 << 4)
#define AT91_DDRSDRC_DBW_16BITS (1 << 4)
#define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */
+#define AT91CAP9_DDRSDRC_DLL 0x20 /* DLL Information Register */
#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
+#define AT91CAP9_DDRSDRC_SDCOVF (1 << 3) /* Slave Delay Correction Overflow */
+#define AT91CAP9_DDRSDRC_SDCUDF (1 << 4) /* Slave Delay Correction Underflow */
+#define AT91CAP9_DDRSDRC_SDERF (1 << 5) /* Slave Delay Correction error */
#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
+#define AT91CAP9_DDRSDRC_SDVAL (0xff << 16) /* Slave Delay value */
+#define AT91CAP9_DDRSDRC_SDCVAL (0xff << 24) /* Slave Delay Correction value */
-#define AT91_DDRSDRC_HS 0x2C /* High Speed Register */
+#define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */
#define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */
#define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */
-#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register */
+#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register [SAM9 Only] */
#define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */
#define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */
#define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */
-#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register */
+#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register [SAM9 Only] */
#define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */
#define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */
diff --git a/arch/arm/mach-at91/include/mach/at91sam9_smc.h b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
index eb18a70fa6472d32881af288909d144d988f39ce..175e1fdd9fe8ade33846f2ff42441d61053bc928 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9_smc.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9_smc.h
@@ -18,6 +18,35 @@
#include
+#ifndef __ASSEMBLY__
+struct sam9_smc_config {
+ /* Setup register */
+ u8 ncs_read_setup;
+ u8 nrd_setup;
+ u8 ncs_write_setup;
+ u8 nwe_setup;
+
+ /* Pulse register */
+ u8 ncs_read_pulse;
+ u8 nrd_pulse;
+ u8 ncs_write_pulse;
+ u8 nwe_pulse;
+
+ /* Cycle register */
+ u16 read_cycle;
+ u16 write_cycle;
+
+ /* Mode register */
+ u32 mode;
+ u8 tdf_cycles:4;
+};
+
+extern void sam9_smc_configure(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_read_mode(int id, int cs, struct sam9_smc_config *config);
+extern void sam9_smc_write_mode(int id, int cs, struct sam9_smc_config *config);
+#endif
+
#define AT91_SMC_SETUP 0x00 /* Setup Register for CS n */
#define AT91_SMC_NWESETUP (0x3f << 0) /* NWE Setup Length */
#define AT91_SMC_NWESETUP_(x) ((x) << 0)
diff --git a/arch/arm/mach-at91/include/mach/at91sam9g45.h b/arch/arm/mach-at91/include/mach/at91sam9g45.h
index f0c23c960dece748b5453e735c66e710c205a54d..dd9c95ea0862d7233c4d669b2262c05cd6d3021d 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9g45.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9g45.h
@@ -90,7 +90,6 @@
#define AT91_DDRSDRC0 (0xffffe600 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffea00 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
#define AT91SAM9G45_BASE_ECC 0xffffe200
@@ -102,6 +101,7 @@
#define AT91SAM9G45_BASE_PIOC 0xfffff600
#define AT91SAM9G45_BASE_PIOD 0xfffff800
#define AT91SAM9G45_BASE_PIOE 0xfffffa00
+#define AT91SAM9G45_BASE_RSTC 0xfffffd00
#define AT91SAM9G45_BASE_SHDWC 0xfffffd10
#define AT91SAM9G45_BASE_RTT 0xfffffd20
#define AT91SAM9G45_BASE_PIT 0xfffffd30
diff --git a/arch/arm/mach-at91/include/mach/at91sam9rl.h b/arch/arm/mach-at91/include/mach/at91sam9rl.h
index 2bb359e60b97f5b71367ac3ffe832b255f90be3d..d7bead7118da85873c4ef43388432ce80f24a9f1 100644
--- a/arch/arm/mach-at91/include/mach/at91sam9rl.h
+++ b/arch/arm/mach-at91/include/mach/at91sam9rl.h
@@ -72,7 +72,6 @@
#define AT91_SDRAMC0 (0xffffea00 - AT91_BASE_SYS)
#define AT91_MATRIX (0xffffee00 - AT91_BASE_SYS)
#define AT91_PMC (0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC (0xfffffd00 - AT91_BASE_SYS)
#define AT91_SCKCR (0xfffffd50 - AT91_BASE_SYS)
#define AT91_GPBR (0xfffffd60 - AT91_BASE_SYS)
@@ -84,6 +83,7 @@
#define AT91SAM9RL_BASE_PIOB 0xfffff600
#define AT91SAM9RL_BASE_PIOC 0xfffff800
#define AT91SAM9RL_BASE_PIOD 0xfffffa00
+#define AT91SAM9RL_BASE_RSTC 0xfffffd00
#define AT91SAM9RL_BASE_SHDWC 0xfffffd10
#define AT91SAM9RL_BASE_RTT 0xfffffd20
#define AT91SAM9RL_BASE_PIT 0xfffffd30
diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h
index d0b377b21bd7d76da84a19db3c05c6d7304e62c0..3b33f07b1e1189ab4a49644741715731b095461f 100644
--- a/arch/arm/mach-at91/include/mach/board.h
+++ b/arch/arm/mach-at91/include/mach/board.h
@@ -88,7 +88,7 @@ extern void __init at91_add_device_eth(struct macb_platform_data *data);
struct at91_usbh_data {
u8 ports; /* number of ports on root hub */
int vbus_pin[2]; /* port power-control pin */
- u8 vbus_pin_inverted;
+ u8 vbus_pin_active_low[2];
u8 overcurrent_supported;
int overcurrent_pin[2];
u8 overcurrent_status[2];
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 62ad95556c367f7ab7f0311428b6475070aeab02..1606379ac28462dd33f31ba8e0756a9d6ec4d21a 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -34,7 +34,6 @@
/*
* Show the reason for the previous system reset.
*/
-#if defined(AT91_RSTC)
#include
#include
@@ -58,10 +57,10 @@ static void __init show_reset_status(void)
char *reason, *r2 = reset;
u32 reset_type, wake_type;
- if (!at91_shdwc_base)
+ if (!at91_shdwc_base || !at91_rstc_base)
return;
- reset_type = at91_sys_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
+ reset_type = at91_rstc_read(AT91_RSTC_SR) & AT91_RSTC_RSTTYP;
wake_type = at91_shdwc_read(AT91_SHDW_SR);
switch (reset_type) {
@@ -102,10 +101,6 @@ static void __init show_reset_status(void)
}
pr_info("AT91: Starting after %s %s\n", reason, r2);
}
-#else
-static void __init show_reset_status(void) {}
-#endif
-
static int at91_pm_valid_state(suspend_state_t state)
{
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index ce9a206991111672d6d1a0a235855c8849adf842..7eb40d24242f2ae54fbd9ab8197d6166f98381eb 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -25,21 +25,21 @@ static inline u32 sdram_selfrefresh_enable(void)
: : "r" (0))
#elif defined(CONFIG_ARCH_AT91CAP9)
-#include
+#include
static inline u32 sdram_selfrefresh_enable(void)
{
u32 saved_lpr, lpr;
- saved_lpr = at91_ramc_read(0, AT91_DDRSDRC_LPR);
+ saved_lpr = at91_ramc_read(0, AT91CAP9_DDRSDRC_LPR);
lpr = saved_lpr & ~AT91_DDRSDRC_LPCB;
- at91_ramc_write(0, AT91_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
+ at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, lpr | AT91_DDRSDRC_LPCB_SELF_REFRESH);
return saved_lpr;
}
-#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91_DDRSDRC_LPR, saved_lpr)
+#define sdram_selfrefresh_disable(saved_lpr) at91_ramc_write(0, AT91CAP9_DDRSDRC_LPR, saved_lpr)
#define wait_for_interrupt_enable() cpu_do_idle()
#elif defined(CONFIG_ARCH_AT91SAM9G45)
diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S
index f7922a436172a063bf188af5fc2b24cad4ab148e..92dfb8461392a66541a1370de2c7dce11c03a039 100644
--- a/arch/arm/mach-at91/pm_slowclock.S
+++ b/arch/arm/mach-at91/pm_slowclock.S
@@ -18,9 +18,8 @@
#if defined(CONFIG_ARCH_AT91RM9200)
#include
-#elif defined(CONFIG_ARCH_AT91CAP9)
-#include
-#elif defined(CONFIG_ARCH_AT91SAM9G45)
+#elif defined(CONFIG_ARCH_AT91CAP9) \
+ || defined(CONFIG_ARCH_AT91SAM9G45)
#include
#else
#include
diff --git a/arch/arm/mach-at91/sam9_smc.c b/arch/arm/mach-at91/sam9_smc.c
index 8294783b679d8aa58579a9d0a149a1a79bb1af6a..99a0a1d2b7dce8503d303c7af2dc022f06738d74 100644
--- a/arch/arm/mach-at91/sam9_smc.c
+++ b/arch/arm/mach-at91/sam9_smc.c
@@ -2,6 +2,7 @@
* linux/arch/arm/mach-at91/sam9_smc.c
*
* Copyright (C) 2008 Andrew Victor
+ * Copyright (C) 2011 Jean-Christophe PLAGNIOL-VILLARD
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -22,7 +23,22 @@
static void __iomem *smc_base_addr[2];
-static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_config* config)
+static void sam9_smc_cs_write_mode(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ __raw_writel(config->mode
+ | AT91_SMC_TDF_(config->tdf_cycles),
+ base + AT91_SMC_MODE);
+}
+
+void sam9_smc_write_mode(int id, int cs,
+ struct sam9_smc_config *config)
+{
+ sam9_smc_cs_write_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_configure(void __iomem *base,
+ struct sam9_smc_config *config)
{
/* Setup register */
@@ -45,16 +61,66 @@ static void __init sam9_smc_cs_configure(void __iomem *base, struct sam9_smc_con
base + AT91_SMC_CYCLE);
/* Mode register */
- __raw_writel(config->mode
- | AT91_SMC_TDF_(config->tdf_cycles),
- base + AT91_SMC_MODE);
+ sam9_smc_cs_write_mode(base, config);
}
-void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config)
+void sam9_smc_configure(int id, int cs,
+ struct sam9_smc_config *config)
{
sam9_smc_cs_configure(AT91_SMC_CS(id, cs), config);
}
+static void sam9_smc_cs_read_mode(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ u32 val = __raw_readl(base + AT91_SMC_MODE);
+
+ config->mode = (val & ~AT91_SMC_NWECYCLE);
+ config->tdf_cycles = (val & AT91_SMC_NWECYCLE) >> 16 ;
+}
+
+void sam9_smc_read_mode(int id, int cs,
+ struct sam9_smc_config *config)
+{
+ sam9_smc_cs_read_mode(AT91_SMC_CS(id, cs), config);
+}
+
+static void sam9_smc_cs_read(void __iomem *base,
+ struct sam9_smc_config *config)
+{
+ u32 val;
+
+ /* Setup register */
+ val = __raw_readl(base + AT91_SMC_SETUP);
+
+ config->nwe_setup = val & AT91_SMC_NWESETUP;
+ config->ncs_write_setup = (val & AT91_SMC_NCS_WRSETUP) >> 8;
+ config->nrd_setup = (val & AT91_SMC_NRDSETUP) >> 16;
+ config->ncs_read_setup = (val & AT91_SMC_NCS_RDSETUP) >> 24;
+
+ /* Pulse register */
+ val = __raw_readl(base + AT91_SMC_PULSE);
+
+ config->nwe_setup = val & AT91_SMC_NWEPULSE;
+ config->ncs_write_pulse = (val & AT91_SMC_NCS_WRPULSE) >> 8;
+ config->nrd_pulse = (val & AT91_SMC_NRDPULSE) >> 16;
+ config->ncs_read_pulse = (val & AT91_SMC_NCS_RDPULSE) >> 24;
+
+ /* Cycle register */
+ val = __raw_readl(base + AT91_SMC_CYCLE);
+
+ config->write_cycle = val & AT91_SMC_NWECYCLE;
+ config->read_cycle = (val & AT91_SMC_NRDCYCLE) >> 16;
+
+ /* Mode register */
+ sam9_smc_cs_read_mode(base, config);
+}
+
+void sam9_smc_read(int id, int cs, struct sam9_smc_config *config)
+{
+ sam9_smc_cs_read(AT91_SMC_CS(id, cs), config);
+}
+
void __init at91sam9_ioremap_smc(int id, u32 addr)
{
if (id > 1) {
diff --git a/arch/arm/mach-at91/sam9_smc.h b/arch/arm/mach-at91/sam9_smc.h
index 039c5ce17aec5cb2c8b01625041b7924f5bc7e3c..3e52dcd4a59febc19418194892f8ed4b5ec58c01 100644
--- a/arch/arm/mach-at91/sam9_smc.h
+++ b/arch/arm/mach-at91/sam9_smc.h
@@ -8,27 +8,4 @@
* published by the Free Software Foundation.
*/
-struct sam9_smc_config {
- /* Setup register */
- u8 ncs_read_setup;
- u8 nrd_setup;
- u8 ncs_write_setup;
- u8 nwe_setup;
-
- /* Pulse register */
- u8 ncs_read_pulse;
- u8 nrd_pulse;
- u8 ncs_write_pulse;
- u8 nwe_pulse;
-
- /* Cycle register */
- u16 read_cycle;
- u16 write_cycle;
-
- /* Mode register */
- u32 mode;
- u8 tdf_cycles:4;
-};
-
-extern void __init sam9_smc_configure(int id, int cs, struct sam9_smc_config* config);
extern void __init at91sam9_ioremap_smc(int id, u32 addr);
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index 8bdcc3cb6012bf723ab46c27ca44f63d81d22da9..69d3fc4c46f372ff99c2468f5e8eda6cc110bfd5 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -29,9 +29,12 @@ EXPORT_SYMBOL(at91_soc_initdata);
void __init at91rm9200_set_type(int type)
{
if (type == ARCH_REVISON_9200_PQFP)
- at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
- else
at91_soc_initdata.subtype = AT91_SOC_RM9200_PQFP;
+ else
+ at91_soc_initdata.subtype = AT91_SOC_RM9200_BGA;
+
+ pr_info("AT91: filled in soc subtype: %s\n",
+ at91_get_soc_subtype(&at91_soc_initdata));
}
void __init at91_init_irq_default(void)
@@ -281,6 +284,15 @@ void __init at91_ioremap_shdwc(u32 base_addr)
pm_power_off = at91sam9_poweroff;
}
+void __iomem *at91_rstc_base;
+
+void __init at91_ioremap_rstc(u32 base_addr)
+{
+ at91_rstc_base = ioremap(base_addr, 16);
+ if (!at91_rstc_base)
+ panic("Impossible to ioremap at91_rstc_base\n");
+}
+
void __init at91_initialize(unsigned long main_clock)
{
at91_boot_soc.ioremap_registers();
diff --git a/arch/arm/mach-bcmring/arch.c b/arch/arm/mach-bcmring/arch.c
index 9e5e7552498c362c7880b76d3e820640cddfc555..45c97b1ee9b1d59ba923a69b50e94337b48da993 100644
--- a/arch/arm/mach-bcmring/arch.c
+++ b/arch/arm/mach-bcmring/arch.c
@@ -194,6 +194,6 @@ MACHINE_START(BCMRING, "BCMRING")
.init_early = bcmring_init_early,
.init_irq = bcmring_init_irq,
.timer = &bcmring_timer,
- .init_machine = bcmring_init_machine
+ .init_machine = bcmring_init_machine,
.restart = bcmring_restart,
MACHINE_END
diff --git a/arch/arm/mach-bcmring/dma.c b/arch/arm/mach-bcmring/dma.c
index 1a1a27dd56544d0684bebc29d40b69bdff2d190f..1024396797e16f6c839383da409731bfaef494d3 100644
--- a/arch/arm/mach-bcmring/dma.c
+++ b/arch/arm/mach-bcmring/dma.c
@@ -33,17 +33,11 @@
#include
-#include
#include
#include
#include
#include
-/* I don't quite understand why dc4 fails when this is set to 1 and DMA is enabled */
-/* especially since dc4 doesn't use kmalloc'd memory. */
-
-#define ALLOW_MAP_OF_KMALLOC_MEMORY 0
-
/* ---- Public Variables ------------------------------------------------- */
/* ---- Private Constants and Types -------------------------------------- */
@@ -53,58 +47,18 @@
#define CONTROLLER_FROM_HANDLE(handle) (((handle) >> 4) & 0x0f)
#define CHANNEL_FROM_HANDLE(handle) ((handle) & 0x0f)
-#define DMA_MAP_DEBUG 0
-
-#if DMA_MAP_DEBUG
-# define DMA_MAP_PRINT(fmt, args...) printk("%s: " fmt, __func__, ## args)
-#else
-# define DMA_MAP_PRINT(fmt, args...)
-#endif
/* ---- Private Variables ------------------------------------------------ */
static DMA_Global_t gDMA;
static struct proc_dir_entry *gDmaDir;
-static atomic_t gDmaStatMemTypeKmalloc = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeVmalloc = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeUser = ATOMIC_INIT(0);
-static atomic_t gDmaStatMemTypeCoherent = ATOMIC_INIT(0);
-
#include "dma_device.c"
/* ---- Private Function Prototypes -------------------------------------- */
/* ---- Functions ------------------------------------------------------- */
-/****************************************************************************/
-/**
-* Displays information for /proc/dma/mem-type
-*/
-/****************************************************************************/
-
-static int dma_proc_read_mem_type(char *buf, char **start, off_t offset,
- int count, int *eof, void *data)
-{
- int len = 0;
-
- len += sprintf(buf + len, "dma_map_mem statistics\n");
- len +=
- sprintf(buf + len, "coherent: %d\n",
- atomic_read(&gDmaStatMemTypeCoherent));
- len +=
- sprintf(buf + len, "kmalloc: %d\n",
- atomic_read(&gDmaStatMemTypeKmalloc));
- len +=
- sprintf(buf + len, "vmalloc: %d\n",
- atomic_read(&gDmaStatMemTypeVmalloc));
- len +=
- sprintf(buf + len, "user: %d\n",
- atomic_read(&gDmaStatMemTypeUser));
-
- return len;
-}
-
/****************************************************************************/
/**
* Displays information for /proc/dma/channels
@@ -846,8 +800,6 @@ int dma_init(void)
dma_proc_read_channels, NULL);
create_proc_read_entry("devices", 0, gDmaDir,
dma_proc_read_devices, NULL);
- create_proc_read_entry("mem-type", 0, gDmaDir,
- dma_proc_read_mem_type, NULL);
}
out:
@@ -1565,767 +1517,3 @@ int dma_set_device_handler(DMA_Device_t dev, /* Device to set the callback for.
}
EXPORT_SYMBOL(dma_set_device_handler);
-
-/****************************************************************************/
-/**
-* Initializes a memory mapping structure
-*/
-/****************************************************************************/
-
-int dma_init_mem_map(DMA_MemMap_t *memMap)
-{
- memset(memMap, 0, sizeof(*memMap));
-
- sema_init(&memMap->lock, 1);
-
- return 0;
-}
-
-EXPORT_SYMBOL(dma_init_mem_map);
-
-/****************************************************************************/
-/**
-* Releases any memory currently being held by a memory mapping structure.
-*/
-/****************************************************************************/
-
-int dma_term_mem_map(DMA_MemMap_t *memMap)
-{
- down(&memMap->lock); /* Just being paranoid */
-
- /* Free up any allocated memory */
-
- up(&memMap->lock);
- memset(memMap, 0, sizeof(*memMap));
-
- return 0;
-}
-
-EXPORT_SYMBOL(dma_term_mem_map);
-
-/****************************************************************************/
-/**
-* Looks at a memory address and categorizes it.
-*
-* @return One of the values from the DMA_MemType_t enumeration.
-*/
-/****************************************************************************/
-
-DMA_MemType_t dma_mem_type(void *addr)
-{
- unsigned long addrVal = (unsigned long)addr;
-
- if (addrVal >= CONSISTENT_BASE) {
- /* NOTE: DMA virtual memory space starts at 0xFFxxxxxx */
-
- /* dma_alloc_xxx pages are physically and virtually contiguous */
-
- return DMA_MEM_TYPE_DMA;
- }
-
- /* Technically, we could add one more classification. Addresses between VMALLOC_END */
- /* and the beginning of the DMA virtual address could be considered to be I/O space. */
- /* Right now, nobody cares about this particular classification, so we ignore it. */
-
- if (is_vmalloc_addr(addr)) {
- /* Address comes from the vmalloc'd region. Pages are virtually */
- /* contiguous but NOT physically contiguous */
-
- return DMA_MEM_TYPE_VMALLOC;
- }
-
- if (addrVal >= PAGE_OFFSET) {
- /* PAGE_OFFSET is typically 0xC0000000 */
-
- /* kmalloc'd pages are physically contiguous */
-
- return DMA_MEM_TYPE_KMALLOC;
- }
-
- return DMA_MEM_TYPE_USER;
-}
-
-EXPORT_SYMBOL(dma_mem_type);
-
-/****************************************************************************/
-/**
-* Looks at a memory address and determines if we support DMA'ing to/from
-* that type of memory.
-*
-* @return boolean -
-* return value != 0 means dma supported
-* return value == 0 means dma not supported
-*/
-/****************************************************************************/
-
-int dma_mem_supports_dma(void *addr)
-{
- DMA_MemType_t memType = dma_mem_type(addr);
-
- return (memType == DMA_MEM_TYPE_DMA)
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
- || (memType == DMA_MEM_TYPE_KMALLOC)
-#endif
- || (memType == DMA_MEM_TYPE_USER);
-}
-
-EXPORT_SYMBOL(dma_mem_supports_dma);
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- ) {
- int rc;
-
- down(&memMap->lock);
-
- DMA_MAP_PRINT("memMap: %p\n", memMap);
-
- if (memMap->inUse) {
- printk(KERN_ERR "%s: memory map %p is already being used\n",
- __func__, memMap);
- rc = -EBUSY;
- goto out;
- }
-
- memMap->inUse = 1;
- memMap->dir = dir;
- memMap->numRegionsUsed = 0;
-
- rc = 0;
-
-out:
-
- DMA_MAP_PRINT("returning %d", rc);
-
- up(&memMap->lock);
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_start);
-
-/****************************************************************************/
-/**
-* Adds a segment of memory to a memory map. Each segment is both
-* physically and virtually contiguous.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-static int dma_map_add_segment(DMA_MemMap_t *memMap, /* Stores state information about the map */
- DMA_Region_t *region, /* Region that the segment belongs to */
- void *virtAddr, /* Virtual address of the segment being added */
- dma_addr_t physAddr, /* Physical address of the segment being added */
- size_t numBytes /* Number of bytes of the segment being added */
- ) {
- DMA_Segment_t *segment;
-
- DMA_MAP_PRINT("memMap:%p va:%p pa:0x%x #:%d\n", memMap, virtAddr,
- physAddr, numBytes);
-
- /* Sanity check */
-
- if (((unsigned long)virtAddr < (unsigned long)region->virtAddr)
- || (((unsigned long)virtAddr + numBytes)) >
- ((unsigned long)region->virtAddr + region->numBytes)) {
- printk(KERN_ERR
- "%s: virtAddr %p is outside region @ %p len: %d\n",
- __func__, virtAddr, region->virtAddr, region->numBytes);
- return -EINVAL;
- }
-
- if (region->numSegmentsUsed > 0) {
- /* Check to see if this segment is physically contiguous with the previous one */
-
- segment = ®ion->segment[region->numSegmentsUsed - 1];
-
- if ((segment->physAddr + segment->numBytes) == physAddr) {
- /* It is - just add on to the end */
-
- DMA_MAP_PRINT("appending %d bytes to last segment\n",
- numBytes);
-
- segment->numBytes += numBytes;
-
- return 0;
- }
- }
-
- /* Reallocate to hold more segments, if required. */
-
- if (region->numSegmentsUsed >= region->numSegmentsAllocated) {
- DMA_Segment_t *newSegment;
- size_t oldSize =
- region->numSegmentsAllocated * sizeof(*newSegment);
- int newAlloc = region->numSegmentsAllocated + 4;
- size_t newSize = newAlloc * sizeof(*newSegment);
-
- newSegment = kmalloc(newSize, GFP_KERNEL);
- if (newSegment == NULL) {
- return -ENOMEM;
- }
- memcpy(newSegment, region->segment, oldSize);
- memset(&((uint8_t *) newSegment)[oldSize], 0,
- newSize - oldSize);
- kfree(region->segment);
-
- region->numSegmentsAllocated = newAlloc;
- region->segment = newSegment;
- }
-
- segment = ®ion->segment[region->numSegmentsUsed];
- region->numSegmentsUsed++;
-
- segment->virtAddr = virtAddr;
- segment->physAddr = physAddr;
- segment->numBytes = numBytes;
-
- DMA_MAP_PRINT("returning success\n");
-
- return 0;
-}
-
-/****************************************************************************/
-/**
-* Adds a region of memory to a memory map. Each region is virtually
-* contiguous, but not necessarily physically contiguous.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *mem, /* Virtual address that we want to get a map of */
- size_t numBytes /* Number of bytes being mapped */
- ) {
- unsigned long addr = (unsigned long)mem;
- unsigned int offset;
- int rc = 0;
- DMA_Region_t *region;
- dma_addr_t physAddr;
-
- down(&memMap->lock);
-
- DMA_MAP_PRINT("memMap:%p va:%p #:%d\n", memMap, mem, numBytes);
-
- if (!memMap->inUse) {
- printk(KERN_ERR "%s: Make sure you call dma_map_start first\n",
- __func__);
- rc = -EINVAL;
- goto out;
- }
-
- /* Reallocate to hold more regions. */
-
- if (memMap->numRegionsUsed >= memMap->numRegionsAllocated) {
- DMA_Region_t *newRegion;
- size_t oldSize =
- memMap->numRegionsAllocated * sizeof(*newRegion);
- int newAlloc = memMap->numRegionsAllocated + 4;
- size_t newSize = newAlloc * sizeof(*newRegion);
-
- newRegion = kmalloc(newSize, GFP_KERNEL);
- if (newRegion == NULL) {
- rc = -ENOMEM;
- goto out;
- }
- memcpy(newRegion, memMap->region, oldSize);
- memset(&((uint8_t *) newRegion)[oldSize], 0, newSize - oldSize);
-
- kfree(memMap->region);
-
- memMap->numRegionsAllocated = newAlloc;
- memMap->region = newRegion;
- }
-
- region = &memMap->region[memMap->numRegionsUsed];
- memMap->numRegionsUsed++;
-
- offset = addr & ~PAGE_MASK;
-
- region->memType = dma_mem_type(mem);
- region->virtAddr = mem;
- region->numBytes = numBytes;
- region->numSegmentsUsed = 0;
- region->numLockedPages = 0;
- region->lockedPages = NULL;
-
- switch (region->memType) {
- case DMA_MEM_TYPE_VMALLOC:
- {
- atomic_inc(&gDmaStatMemTypeVmalloc);
-
- /* printk(KERN_ERR "%s: vmalloc'd pages are not supported\n", __func__); */
-
- /* vmalloc'd pages are not physically contiguous */
-
- rc = -EINVAL;
- break;
- }
-
- case DMA_MEM_TYPE_KMALLOC:
- {
- atomic_inc(&gDmaStatMemTypeKmalloc);
-
- /* kmalloc'd pages are physically contiguous, so they'll have exactly */
- /* one segment */
-
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
- physAddr =
- dma_map_single(NULL, mem, numBytes, memMap->dir);
- rc = dma_map_add_segment(memMap, region, mem, physAddr,
- numBytes);
-#else
- rc = -EINVAL;
-#endif
- break;
- }
-
- case DMA_MEM_TYPE_DMA:
- {
- /* dma_alloc_xxx pages are physically contiguous */
-
- atomic_inc(&gDmaStatMemTypeCoherent);
-
- physAddr = (vmalloc_to_pfn(mem) << PAGE_SHIFT) + offset;
-
- dma_sync_single_for_cpu(NULL, physAddr, numBytes,
- memMap->dir);
- rc = dma_map_add_segment(memMap, region, mem, physAddr,
- numBytes);
- break;
- }
-
- case DMA_MEM_TYPE_USER:
- {
- size_t firstPageOffset;
- size_t firstPageSize;
- struct page **pages;
- struct task_struct *userTask;
-
- atomic_inc(&gDmaStatMemTypeUser);
-
-#if 1
- /* If the pages are user pages, then the dma_mem_map_set_user_task function */
- /* must have been previously called. */
-
- if (memMap->userTask == NULL) {
- printk(KERN_ERR
- "%s: must call dma_mem_map_set_user_task when using user-mode memory\n",
- __func__);
- return -EINVAL;
- }
-
- /* User pages need to be locked. */
-
- firstPageOffset =
- (unsigned long)region->virtAddr & (PAGE_SIZE - 1);
- firstPageSize = PAGE_SIZE - firstPageOffset;
-
- region->numLockedPages = (firstPageOffset
- + region->numBytes +
- PAGE_SIZE - 1) / PAGE_SIZE;
- pages =
- kmalloc(region->numLockedPages *
- sizeof(struct page *), GFP_KERNEL);
-
- if (pages == NULL) {
- region->numLockedPages = 0;
- return -ENOMEM;
- }
-
- userTask = memMap->userTask;
-
- down_read(&userTask->mm->mmap_sem);
- rc = get_user_pages(userTask, /* task */
- userTask->mm, /* mm */
- (unsigned long)region->virtAddr, /* start */
- region->numLockedPages, /* len */
- memMap->dir == DMA_FROM_DEVICE, /* write */
- 0, /* force */
- pages, /* pages (array of pointers to page) */
- NULL); /* vmas */
- up_read(&userTask->mm->mmap_sem);
-
- if (rc != region->numLockedPages) {
- kfree(pages);
- region->numLockedPages = 0;
-
- if (rc >= 0) {
- rc = -EINVAL;
- }
- } else {
- uint8_t *virtAddr = region->virtAddr;
- size_t bytesRemaining;
- int pageIdx;
-
- rc = 0; /* Since get_user_pages returns +ve number */
-
- region->lockedPages = pages;
-
- /* We've locked the user pages. Now we need to walk them and figure */
- /* out the physical addresses. */
-
- /* The first page may be partial */
-
- dma_map_add_segment(memMap,
- region,
- virtAddr,
- PFN_PHYS(page_to_pfn
- (pages[0])) +
- firstPageOffset,
- firstPageSize);
-
- virtAddr += firstPageSize;
- bytesRemaining =
- region->numBytes - firstPageSize;
-
- for (pageIdx = 1;
- pageIdx < region->numLockedPages;
- pageIdx++) {
- size_t bytesThisPage =
- (bytesRemaining >
- PAGE_SIZE ? PAGE_SIZE :
- bytesRemaining);
-
- DMA_MAP_PRINT
- ("pageIdx:%d pages[pageIdx]=%p pfn=%u phys=%u\n",
- pageIdx, pages[pageIdx],
- page_to_pfn(pages[pageIdx]),
- PFN_PHYS(page_to_pfn
- (pages[pageIdx])));
-
- dma_map_add_segment(memMap,
- region,
- virtAddr,
- PFN_PHYS(page_to_pfn
- (pages
- [pageIdx])),
- bytesThisPage);
-
- virtAddr += bytesThisPage;
- bytesRemaining -= bytesThisPage;
- }
- }
-#else
- printk(KERN_ERR
- "%s: User mode pages are not yet supported\n",
- __func__);
-
- /* user pages are not physically contiguous */
-
- rc = -EINVAL;
-#endif
- break;
- }
-
- default:
- {
- printk(KERN_ERR "%s: Unsupported memory type: %d\n",
- __func__, region->memType);
-
- rc = -EINVAL;
- break;
- }
- }
-
- if (rc != 0) {
- memMap->numRegionsUsed--;
- }
-
-out:
-
- DMA_MAP_PRINT("returning %d\n", rc);
-
- up(&memMap->lock);
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_add_segment);
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *mem, /* Virtual address that we want to get a map of */
- size_t numBytes, /* Number of bytes being mapped */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- ) {
- int rc;
-
- rc = dma_map_start(memMap, dir);
- if (rc == 0) {
- rc = dma_map_add_region(memMap, mem, numBytes);
- if (rc < 0) {
- /* Since the add fails, this function will fail, and the caller won't */
- /* call unmap, so we need to do it here. */
-
- dma_unmap(memMap, 0);
- }
- }
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_mem);
-
-/****************************************************************************/
-/**
-* Setup a descriptor ring for a given memory map.
-*
-* It is assumed that the descriptor ring has already been initialized, and
-* this routine will only reallocate a new descriptor ring if the existing
-* one is too small.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
- DMA_MemMap_t *memMap, /* Memory map that will be used */
- dma_addr_t devPhysAddr /* Physical address of device */
- ) {
- int rc;
- int numDescriptors;
- DMA_DeviceAttribute_t *devAttr;
- DMA_Region_t *region;
- DMA_Segment_t *segment;
- dma_addr_t srcPhysAddr;
- dma_addr_t dstPhysAddr;
- int regionIdx;
- int segmentIdx;
-
- devAttr = &DMA_gDeviceAttribute[dev];
-
- down(&memMap->lock);
-
- /* Figure out how many descriptors we need */
-
- numDescriptors = 0;
- for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
- region = &memMap->region[regionIdx];
-
- for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
- segmentIdx++) {
- segment = ®ion->segment[segmentIdx];
-
- if (memMap->dir == DMA_TO_DEVICE) {
- srcPhysAddr = segment->physAddr;
- dstPhysAddr = devPhysAddr;
- } else {
- srcPhysAddr = devPhysAddr;
- dstPhysAddr = segment->physAddr;
- }
-
- rc =
- dma_calculate_descriptor_count(dev, srcPhysAddr,
- dstPhysAddr,
- segment->
- numBytes);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_calculate_descriptor_count failed: %d\n",
- __func__, rc);
- goto out;
- }
- numDescriptors += rc;
- }
- }
-
- /* Adjust the size of the ring, if it isn't big enough */
-
- if (numDescriptors > devAttr->ring.descriptorsAllocated) {
- dma_free_descriptor_ring(&devAttr->ring);
- rc =
- dma_alloc_descriptor_ring(&devAttr->ring,
- numDescriptors);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_alloc_descriptor_ring failed: %d\n",
- __func__, rc);
- goto out;
- }
- } else {
- rc =
- dma_init_descriptor_ring(&devAttr->ring,
- numDescriptors);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_init_descriptor_ring failed: %d\n",
- __func__, rc);
- goto out;
- }
- }
-
- /* Populate the descriptors */
-
- for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
- region = &memMap->region[regionIdx];
-
- for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
- segmentIdx++) {
- segment = ®ion->segment[segmentIdx];
-
- if (memMap->dir == DMA_TO_DEVICE) {
- srcPhysAddr = segment->physAddr;
- dstPhysAddr = devPhysAddr;
- } else {
- srcPhysAddr = devPhysAddr;
- dstPhysAddr = segment->physAddr;
- }
-
- rc =
- dma_add_descriptors(&devAttr->ring, dev,
- srcPhysAddr, dstPhysAddr,
- segment->numBytes);
- if (rc < 0) {
- printk(KERN_ERR
- "%s: dma_add_descriptors failed: %d\n",
- __func__, rc);
- goto out;
- }
- }
- }
-
- rc = 0;
-
-out:
-
- up(&memMap->lock);
- return rc;
-}
-
-EXPORT_SYMBOL(dma_map_create_descriptor_ring);
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
- int dirtied /* non-zero if any of the pages were modified */
- ) {
-
- int rc = 0;
- int regionIdx;
- int segmentIdx;
- DMA_Region_t *region;
- DMA_Segment_t *segment;
-
- down(&memMap->lock);
-
- for (regionIdx = 0; regionIdx < memMap->numRegionsUsed; regionIdx++) {
- region = &memMap->region[regionIdx];
-
- for (segmentIdx = 0; segmentIdx < region->numSegmentsUsed;
- segmentIdx++) {
- segment = ®ion->segment[segmentIdx];
-
- switch (region->memType) {
- case DMA_MEM_TYPE_VMALLOC:
- {
- printk(KERN_ERR
- "%s: vmalloc'd pages are not yet supported\n",
- __func__);
- rc = -EINVAL;
- goto out;
- }
-
- case DMA_MEM_TYPE_KMALLOC:
- {
-#if ALLOW_MAP_OF_KMALLOC_MEMORY
- dma_unmap_single(NULL,
- segment->physAddr,
- segment->numBytes,
- memMap->dir);
-#endif
- break;
- }
-
- case DMA_MEM_TYPE_DMA:
- {
- dma_sync_single_for_cpu(NULL,
- segment->
- physAddr,
- segment->
- numBytes,
- memMap->dir);
- break;
- }
-
- case DMA_MEM_TYPE_USER:
- {
- /* Nothing to do here. */
-
- break;
- }
-
- default:
- {
- printk(KERN_ERR
- "%s: Unsupported memory type: %d\n",
- __func__, region->memType);
- rc = -EINVAL;
- goto out;
- }
- }
-
- segment->virtAddr = NULL;
- segment->physAddr = 0;
- segment->numBytes = 0;
- }
-
- if (region->numLockedPages > 0) {
- int pageIdx;
-
- /* Some user pages were locked. We need to go and unlock them now. */
-
- for (pageIdx = 0; pageIdx < region->numLockedPages;
- pageIdx++) {
- struct page *page =
- region->lockedPages[pageIdx];
-
- if (memMap->dir == DMA_FROM_DEVICE) {
- SetPageDirty(page);
- }
- page_cache_release(page);
- }
- kfree(region->lockedPages);
- region->numLockedPages = 0;
- region->lockedPages = NULL;
- }
-
- region->memType = DMA_MEM_TYPE_NONE;
- region->virtAddr = NULL;
- region->numBytes = 0;
- region->numSegmentsUsed = 0;
- }
- memMap->userTask = NULL;
- memMap->numRegionsUsed = 0;
- memMap->inUse = 0;
-
-out:
- up(&memMap->lock);
-
- return rc;
-}
-
-EXPORT_SYMBOL(dma_unmap);
diff --git a/arch/arm/mach-bcmring/include/mach/dma.h b/arch/arm/mach-bcmring/include/mach/dma.h
index 1f2c5319c05656294170621f0653778115441e25..72543781207b2f2a70e5bfbe5d84f44bec3239a7 100644
--- a/arch/arm/mach-bcmring/include/mach/dma.h
+++ b/arch/arm/mach-bcmring/include/mach/dma.h
@@ -26,15 +26,9 @@
/* ---- Include Files ---------------------------------------------------- */
#include
-#include
#include
#include
#include
-#include
-#include
-#include
-#include
-#include
/* ---- Constants and Types ---------------------------------------------- */
@@ -111,78 +105,6 @@ typedef struct {
} DMA_DescriptorRing_t;
-/****************************************************************************
-*
-* The DMA_MemType_t and DMA_MemMap_t are helper structures used to setup
-* DMA chains from a variety of memory sources.
-*
-*****************************************************************************/
-
-#define DMA_MEM_MAP_MIN_SIZE 4096 /* Pages less than this size are better */
- /* off not being DMA'd. */
-
-typedef enum {
- DMA_MEM_TYPE_NONE, /* Not a valid setting */
- DMA_MEM_TYPE_VMALLOC, /* Memory came from vmalloc call */
- DMA_MEM_TYPE_KMALLOC, /* Memory came from kmalloc call */
- DMA_MEM_TYPE_DMA, /* Memory came from dma_alloc_xxx call */
- DMA_MEM_TYPE_USER, /* Memory came from user space. */
-
-} DMA_MemType_t;
-
-/* A segment represents a physically and virtually contiguous chunk of memory. */
-/* i.e. each segment can be DMA'd */
-/* A user of the DMA code will add memory regions. Each region may need to be */
-/* represented by one or more segments. */
-
-typedef struct {
- void *virtAddr; /* Virtual address used for this segment */
- dma_addr_t physAddr; /* Physical address this segment maps to */
- size_t numBytes; /* Size of the segment, in bytes */
-
-} DMA_Segment_t;
-
-/* A region represents a virtually contiguous chunk of memory, which may be */
-/* made up of multiple segments. */
-
-typedef struct {
- DMA_MemType_t memType;
- void *virtAddr;
- size_t numBytes;
-
- /* Each region (virtually contiguous) consists of one or more segments. Each */
- /* segment is virtually and physically contiguous. */
-
- int numSegmentsUsed;
- int numSegmentsAllocated;
- DMA_Segment_t *segment;
-
- /* When a region corresponds to user memory, we need to lock all of the pages */
- /* down before we can figure out the physical addresses. The lockedPage array contains */
- /* the pages that were locked, and which subsequently need to be unlocked once the */
- /* memory is unmapped. */
-
- unsigned numLockedPages;
- struct page **lockedPages;
-
-} DMA_Region_t;
-
-typedef struct {
- int inUse; /* Is this mapping currently being used? */
- struct semaphore lock; /* Acquired when using this structure */
- enum dma_data_direction dir; /* Direction this transfer is intended for */
-
- /* In the event that we're mapping user memory, we need to know which task */
- /* the memory is for, so that we can obtain the correct mm locks. */
-
- struct task_struct *userTask;
-
- int numRegionsUsed;
- int numRegionsAllocated;
- DMA_Region_t *region;
-
-} DMA_MemMap_t;
-
/****************************************************************************
*
* The DMA_DeviceAttribute_t contains information which describes a
@@ -568,124 +490,6 @@ int dma_alloc_double_dst_descriptors(DMA_Handle_t handle, /* DMA Handle */
size_t numBytes /* Number of bytes in each destination buffer */
);
-/****************************************************************************/
-/**
-* Initializes a DMA_MemMap_t data structure
-*/
-/****************************************************************************/
-
-int dma_init_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
- );
-
-/****************************************************************************/
-/**
-* Releases any memory currently being held by a memory mapping structure.
-*/
-/****************************************************************************/
-
-int dma_term_mem_map(DMA_MemMap_t *memMap /* Stores state information about the map */
- );
-
-/****************************************************************************/
-/**
-* Looks at a memory address and categorizes it.
-*
-* @return One of the values from the DMA_MemType_t enumeration.
-*/
-/****************************************************************************/
-
-DMA_MemType_t dma_mem_type(void *addr);
-
-/****************************************************************************/
-/**
-* Sets the process (aka userTask) associated with a mem map. This is
-* required if user-mode segments will be added to the mapping.
-*/
-/****************************************************************************/
-
-static inline void dma_mem_map_set_user_task(DMA_MemMap_t *memMap,
- struct task_struct *task)
-{
- memMap->userTask = task;
-}
-
-/****************************************************************************/
-/**
-* Looks at a memory address and determines if we support DMA'ing to/from
-* that type of memory.
-*
-* @return boolean -
-* return value != 0 means dma supported
-* return value == 0 means dma not supported
-*/
-/****************************************************************************/
-
-int dma_mem_supports_dma(void *addr);
-
-/****************************************************************************/
-/**
-* Initializes a memory map for use. Since this function acquires a
-* sempaphore within the memory map, it is VERY important that dma_unmap
-* be called when you're finished using the map.
-*/
-/****************************************************************************/
-
-int dma_map_start(DMA_MemMap_t *memMap, /* Stores state information about the map */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- );
-
-/****************************************************************************/
-/**
-* Adds a segment of memory to a memory map.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_add_region(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *mem, /* Virtual address that we want to get a map of */
- size_t numBytes /* Number of bytes being mapped */
- );
-
-/****************************************************************************/
-/**
-* Creates a descriptor ring from a memory mapping.
-*
-* @return 0 on success, error code otherwise.
-*/
-/****************************************************************************/
-
-int dma_map_create_descriptor_ring(DMA_Device_t dev, /* DMA device (where the ring is stored) */
- DMA_MemMap_t *memMap, /* Memory map that will be used */
- dma_addr_t devPhysAddr /* Physical address of device */
- );
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_map_mem(DMA_MemMap_t *memMap, /* Stores state information about the map */
- void *addr, /* Virtual address that we want to get a map of */
- size_t count, /* Number of bytes being mapped */
- enum dma_data_direction dir /* Direction that the mapping will be going */
- );
-
-/****************************************************************************/
-/**
-* Maps in a memory region such that it can be used for performing a DMA.
-*
-* @return
-*/
-/****************************************************************************/
-
-int dma_unmap(DMA_MemMap_t *memMap, /* Stores state information about the map */
- int dirtied /* non-zero if any of the pages were modified */
- );
-
/****************************************************************************/
/**
* Initiates a transfer when the descriptors have already been setup.
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 6b22b543a83f0f6f393a2fbf9e23324c2bc7b9d1..d5088900af6c89a41eae892fb80be4d88fc8a73d 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -44,7 +44,7 @@
#include
#include
-#define DA850_EVM_PHY_ID "0:00"
+#define DA850_EVM_PHY_ID "davinci_mdio-0:00"
#define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8)
#define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15)
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 346e1de2f5a857ac16fb9c2ecb5b85af9c4537d9..849311d3cb7c184f59adb7df85fe36876b4e3cb3 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -54,7 +54,7 @@ static inline int have_tvp7002(void)
return 0;
}
-#define DM365_EVM_PHY_ID "0:01"
+#define DM365_EVM_PHY_ID "davinci_mdio-0:01"
/*
* A MAX-II CPLD is used for various board control functions.
*/
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index a64b49cfedcad5f495ac2e360751e045036ca2cd..1247ecdcf752d57c7d6aa476a699b34c158a4324 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -40,7 +40,7 @@
#include
#include
-#define DM644X_EVM_PHY_ID "0:01"
+#define DM644X_EVM_PHY_ID "davinci_mdio-0:01"
#define LXT971_PHY_ID (0x001378e2)
#define LXT971_PHY_MASK (0xfffffff0)
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index 64017558860bd0c127a9c5178d8aacd47229a62f..872ac69fa0490af84501ac13d73a792bf5f6aea7 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -736,7 +736,7 @@ static struct davinci_uart_config uart_config __initdata = {
.enabled_uarts = (1 << 0),
};
-#define DM646X_EVM_PHY_ID "0:01"
+#define DM646X_EVM_PHY_ID "davinci_mdio-0:01"
/*
* The following EDMA channels/slots are not being used by drivers (for
* example: Timer, GPIO, UART events etc) on dm646x, hence they are being
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 6c4a16415d476f58fbdadb88308cb803a9019956..8d34f513d41507b7bf2562739d8f824cc1e40c35 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -39,7 +39,7 @@
#include
#include
-#define NEUROS_OSD2_PHY_ID "0:01"
+#define NEUROS_OSD2_PHY_ID "davinci_mdio-0:01"
#define LXT971_PHY_ID 0x001378e2
#define LXT971_PHY_MASK 0xfffffff0
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index e7c0c7c534937132929cf4cdd760fb4c63f4118b..45e815760a27fd0cfc0f2965590eb90a1779b240 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -21,7 +21,7 @@
#include
#include
-#define HAWKBOARD_PHY_ID "0:07"
+#define HAWKBOARD_PHY_ID "davinci_mdio-0:07"
#define DA850_HAWK_MMCSD_CD_PIN GPIO_TO_PIN(3, 12)
#define DA850_HAWK_MMCSD_WP_PIN GPIO_TO_PIN(3, 13)
diff --git a/arch/arm/mach-davinci/board-sffsdr.c b/arch/arm/mach-davinci/board-sffsdr.c
index 0b136a831c59563100312646d0b1b1324e8c4e20..31da3c5b2ba37f4934c09fa50bc2aa1cad775631 100644
--- a/arch/arm/mach-davinci/board-sffsdr.c
+++ b/arch/arm/mach-davinci/board-sffsdr.c
@@ -42,7 +42,7 @@
#include
#include
-#define SFFSDR_PHY_ID "0:01"
+#define SFFSDR_PHY_ID "davinci_mdio-0:01"
static struct mtd_partition davinci_sffsdr_nandflash_partition[] = {
/* U-Boot Environment: Block 0
* UBL: Block 1
diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c
index 0ed7fdb64efbf5211a8e5b8fc19bc5cf56fc3b97..992c4c4101856db5f8f503cdd34aa5fbd5196806 100644
--- a/arch/arm/mach-davinci/da850.c
+++ b/arch/arm/mach-davinci/da850.c
@@ -153,34 +153,6 @@ static struct clk pll1_sysclk3 = {
.div_reg = PLLDIV3,
};
-static struct clk pll1_sysclk4 = {
- .name = "pll1_sysclk4",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV4,
-};
-
-static struct clk pll1_sysclk5 = {
- .name = "pll1_sysclk5",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV5,
-};
-
-static struct clk pll1_sysclk6 = {
- .name = "pll0_sysclk6",
- .parent = &pll0_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV6,
-};
-
-static struct clk pll1_sysclk7 = {
- .name = "pll1_sysclk7",
- .parent = &pll1_clk,
- .flags = CLK_PLL,
- .div_reg = PLLDIV7,
-};
-
static struct clk i2c0_clk = {
.name = "i2c0",
.parent = &pll0_aux_clk,
@@ -397,10 +369,6 @@ static struct clk_lookup da850_clks[] = {
CLK(NULL, "pll1_aux", &pll1_aux_clk),
CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
- CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
- CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
- CLK(NULL, "pll1_sysclk6", &pll1_sysclk6),
- CLK(NULL, "pll1_sysclk7", &pll1_sysclk7),
CLK("i2c_davinci.1", NULL, &i2c0_clk),
CLK(NULL, "timer0", &timerp64_0_clk),
CLK("watchdog", NULL, &timerp64_1_clk),
diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c
index dd1429ae6405e3e3c7f48280df66b6992d916b31..bda7aca04ca0dbc504643b30f5b2082bee58420c 100644
--- a/arch/arm/mach-dove/common.c
+++ b/arch/arm/mach-dove/common.c
@@ -28,6 +28,7 @@
#include
#include
#include
+#include
#include
#include
#include "common.h"
@@ -71,7 +72,7 @@ void __init dove_map_io(void)
****************************************************************************/
void __init dove_ehci0_init(void)
{
- orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0);
+ orion_ehci_init(DOVE_USB0_PHYS_BASE, IRQ_DOVE_USB0, EHCI_PHY_NA);
}
/*****************************************************************************
diff --git a/arch/arm/mach-ep93xx/include/mach/dma.h b/arch/arm/mach-ep93xx/include/mach/dma.h
index 46d4d876e6fb853e9cf051ed3f88edc852c8a57d..e82c642fa53cd49ac88afc412b4194319fc3303f 100644
--- a/arch/arm/mach-ep93xx/include/mach/dma.h
+++ b/arch/arm/mach-ep93xx/include/mach/dma.h
@@ -37,7 +37,7 @@
*/
struct ep93xx_dma_data {
int port;
- enum dma_data_direction direction;
+ enum dma_transfer_direction direction;
const char *name;
};
@@ -80,14 +80,14 @@ static inline bool ep93xx_dma_chan_is_m2p(struct dma_chan *chan)
* channel supports given DMA direction. Only M2P channels have such
* limitation, for M2M channels the direction is configurable.
*/
-static inline enum dma_data_direction
+static inline enum dma_transfer_direction
ep93xx_dma_chan_direction(struct dma_chan *chan)
{
if (!ep93xx_dma_chan_is_m2p(chan))
return DMA_NONE;
/* even channels are for TX, odd for RX */
- return (chan->chan_id % 2 == 0) ? DMA_TO_DEVICE : DMA_FROM_DEVICE;
+ return (chan->chan_id % 2 == 0) ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM;
}
#endif /* __ASM_ARCH_DMA_H */
diff --git a/arch/arm/mach-ep93xx/vision_ep9307.c b/arch/arm/mach-ep93xx/vision_ep9307.c
index 03dd4012043eb29a39b7abcf9e0d8bee92c77562..d5fb44f16d317e4796e9c2c08fae5cd16344f4d3 100644
--- a/arch/arm/mach-ep93xx/vision_ep9307.c
+++ b/arch/arm/mach-ep93xx/vision_ep9307.c
@@ -32,6 +32,7 @@
#include
#include
#include
+#include
#include
#include
@@ -153,7 +154,6 @@ static struct i2c_board_info vision_i2c_info[] __initdata = {
}, {
I2C_BOARD_INFO("pca9539", 0x74),
.platform_data = &pca953x_74_gpio_data,
- .irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7)),
}, {
I2C_BOARD_INFO("pca9539", 0x75),
.platform_data = &pca953x_75_gpio_data,
@@ -348,6 +348,8 @@ static void __init vision_init_machine(void)
"pca9539:74"))
pr_warn("cannot request interrupt gpio for pca9539:74\n");
+ vision_i2c_info[1].irq = gpio_to_irq(EP93XX_GPIO_LINE_F(7));
+
ep93xx_register_i2c(&vision_i2c_gpio_data, vision_i2c_info,
ARRAY_SIZE(vision_i2c_info));
ep93xx_register_spi(&vision_spi_master, vision_spi_board_info,
diff --git a/arch/arm/mach-exynos/clock-exynos4210.c b/arch/arm/mach-exynos/clock-exynos4210.c
index a5823a7f249e0b06f1e1ba3b7a43ec0a7e95aaec..13312ccb2d9366f30e1295d403e0212c4f6b3e24 100644
--- a/arch/arm/mach-exynos/clock-exynos4210.c
+++ b/arch/arm/mach-exynos/clock-exynos4210.c
@@ -32,6 +32,7 @@
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4210_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKSRC_LCD1),
@@ -42,6 +43,7 @@ static struct sleep_save exynos4210_clock_save[] = {
SAVE_ITEM(S5P_CLKGATE_IP_LCD1),
SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4210),
};
+#endif
static struct clksrc_clk *sysclks[] = {
/* nothing here yet */
diff --git a/arch/arm/mach-exynos/clock-exynos4212.c b/arch/arm/mach-exynos/clock-exynos4212.c
index 26a668b0d101becc1ea09ab11c6edc7dc23719e1..48af28566fa168703083ed900c7fc8a2a9701998 100644
--- a/arch/arm/mach-exynos/clock-exynos4212.c
+++ b/arch/arm/mach-exynos/clock-exynos4212.c
@@ -32,12 +32,14 @@
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4212_clock_save[] = {
SAVE_ITEM(S5P_CLKSRC_IMAGE),
SAVE_ITEM(S5P_CLKDIV_IMAGE),
SAVE_ITEM(S5P_CLKGATE_IP_IMAGE_4212),
SAVE_ITEM(S5P_CLKGATE_IP_PERIR_4212),
};
+#endif
static struct clk *clk_src_mpll_user_list[] = {
[0] = &clk_fin_mpll,
diff --git a/arch/arm/mach-exynos/clock.c b/arch/arm/mach-exynos/clock.c
index 5a8c42e90005c6fb3a92599671afefed6909fda3..187287aa57ab9154fbe7808bbd26ec895348ddd8 100644
--- a/arch/arm/mach-exynos/clock.c
+++ b/arch/arm/mach-exynos/clock.c
@@ -30,6 +30,7 @@
#include "common.h"
+#ifdef CONFIG_PM_SLEEP
static struct sleep_save exynos4_clock_save[] = {
SAVE_ITEM(S5P_CLKDIV_LEFTBUS),
SAVE_ITEM(S5P_CLKGATE_IP_LEFTBUS),
@@ -93,6 +94,7 @@ static struct sleep_save exynos4_clock_save[] = {
SAVE_ITEM(S5P_CLKGATE_SCLKCPU),
SAVE_ITEM(S5P_CLKGATE_IP_CPU),
};
+#endif
struct clk clk_sclk_hdmi27m = {
.name = "sclk_hdmi27m",
diff --git a/arch/arm/mach-exynos/headsmp.S b/arch/arm/mach-exynos/headsmp.S
index 3cdeb3647542592a4a62f98e0c6b647da358b0d4..5364d4bfa8bc79efe6d51b27ff361811d98b8227 100644
--- a/arch/arm/mach-exynos/headsmp.S
+++ b/arch/arm/mach-exynos/headsmp.S
@@ -36,6 +36,8 @@ pen: ldr r7, [r6]
* should now contain the SVC stack for this core
*/
b secondary_startup
+ENDPROC(exynos4_secondary_startup)
+ .align 2
1: .long .
.long pen_release
diff --git a/arch/arm/mach-exynos/hotplug.c b/arch/arm/mach-exynos/hotplug.c
index da70e7e3993740e88f1bb473bfc593d8f809b287..dd1ad55524c97e0d28f270e93e10f00dab7327b8 100644
--- a/arch/arm/mach-exynos/hotplug.c
+++ b/arch/arm/mach-exynos/hotplug.c
@@ -16,6 +16,7 @@
#include
#include
+#include
#include
diff --git a/arch/arm/mach-exynos/mach-exynos4-dt.c b/arch/arm/mach-exynos/mach-exynos4-dt.c
index 85fa02767d67d7acc4cbed6a0b05dea0998060d0..e6b02fdf1b090ea75f7c5b9c2f14d13fc4c4ebcb 100644
--- a/arch/arm/mach-exynos/mach-exynos4-dt.c
+++ b/arch/arm/mach-exynos/mach-exynos4-dt.c
@@ -15,11 +15,13 @@
#include
#include
+#include
#include
#include
#include
-#include
+
+#include "common.h"
/*
* The following lookup table is used to override device names when devices
@@ -60,7 +62,7 @@ static const struct of_dev_auxdata exynos4210_auxdata_lookup[] __initconst = {
static void __init exynos4210_dt_map_io(void)
{
- s5p_init_io(NULL, 0, S5P_VA_CHIPID);
+ exynos_init_io(NULL, 0);
s3c24xx_init_clocks(24000000);
}
@@ -79,7 +81,9 @@ DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
/* Maintainer: Thomas Abraham */
.init_irq = exynos4_init_irq,
.map_io = exynos4210_dt_map_io,
+ .handle_irq = gic_handle_irq,
.init_machine = exynos4210_dt_machine_init,
.timer = &exynos4_timer,
.dt_compat = exynos4210_dt_compat,
+ .restart = exynos4_restart,
MACHINE_END
diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c
index b895ec0311057698dab4883c4d77099971af7a14..435261f83f46d5d8ada440e17bdc65a0b1e19a1f 100644
--- a/arch/arm/mach-exynos/mach-nuri.c
+++ b/arch/arm/mach-exynos/mach-nuri.c
@@ -220,14 +220,14 @@ static struct s3c_fb_pd_win nuri_fb_win0 = {
.lower_margin = 1,
.hsync_len = 48,
.vsync_len = 3,
- .xres = 1280,
- .yres = 800,
+ .xres = 1024,
+ .yres = 600,
.refresh = 60,
},
.max_bpp = 24,
.default_bpp = 16,
- .virtual_x = 1280,
- .virtual_y = 800,
+ .virtual_x = 1024,
+ .virtual_y = 2 * 600,
};
static struct s3c_fb_platdata nuri_fb_pdata __initdata = {
diff --git a/arch/arm/mach-exynos/mach-origen.c b/arch/arm/mach-exynos/mach-origen.c
index 2b11e046d3919dc393a2875b528abf34e3664d85..0679b8ad2d1e1a4263521f805d7afd246334a037 100644
--- a/arch/arm/mach-exynos/mach-origen.c
+++ b/arch/arm/mach-exynos/mach-origen.c
@@ -597,7 +597,8 @@ static struct s3c_fb_pd_win origen_fb_win0 = {
static struct s3c_fb_platdata origen_lcd_pdata __initdata = {
.win[0] = &origen_fb_win0,
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
- .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC,
+ .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
+ VIDCON1_INV_VCLK,
.setup_gpio = exynos4_fimd0_gpio_setup_24bpp,
};
diff --git a/arch/arm/mach-exynos/mach-universal_c210.c b/arch/arm/mach-exynos/mach-universal_c210.c
index 37ac93e8d6d9ef44940dabb5f1d916301012ee54..0fc65ffde8ff7526f0f9362c8e18e3e27e3c6539 100644
--- a/arch/arm/mach-exynos/mach-universal_c210.c
+++ b/arch/arm/mach-exynos/mach-universal_c210.c
@@ -910,7 +910,7 @@ static struct s5p_fimc_isp_info universal_camera_sensors[] = {
.bus_type = FIMC_MIPI_CSI2,
.board_info = &m5mols_board_info,
.i2c_bus_num = 0,
- .clk_frequency = 21600000UL,
+ .clk_frequency = 24000000UL,
.csi_data_align = 32,
},
};
diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c
index 60bc45e3e7099045560f71bf4aaf29664341e488..0f2035a1eb6e5f31cf7bdbd16270af5efd4abee4 100644
--- a/arch/arm/mach-exynos/platsmp.c
+++ b/arch/arm/mach-exynos/platsmp.c
@@ -23,8 +23,8 @@
#include
#include
+#include
#include
-#include
#include
#include
@@ -137,7 +137,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
while (time_before(jiffies, timeout)) {
smp_rmb();
- __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+ __raw_writel(virt_to_phys(exynos4_secondary_startup),
CPU1_BOOT_REG);
gic_raise_softirq(cpumask_of(cpu), 1);
@@ -192,6 +192,6 @@ void __init platform_smp_prepare_cpus(unsigned int max_cpus)
* until it receives a soft interrupt, and then the
* secondary CPU branches to this address.
*/
- __raw_writel(BSYM(virt_to_phys(exynos4_secondary_startup)),
+ __raw_writel(virt_to_phys(exynos4_secondary_startup),
CPU1_BOOT_REG);
}
diff --git a/arch/arm/mach-exynos/pm.c b/arch/arm/mach-exynos/pm.c
index a4f61a43c7bae9a9f3141ef6ecd396c0ee3ed7c5..e190130517727ea9bcdfb9541496922093a9d672 100644
--- a/arch/arm/mach-exynos/pm.c
+++ b/arch/arm/mach-exynos/pm.c
@@ -206,7 +206,7 @@ static void exynos4_pm_prepare(void)
}
-static int exynos4_pm_add(struct device *dev)
+static int exynos4_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = exynos4_pm_prepare;
pm_cpu_sleep = exynos4_cpu_suspend;
@@ -384,7 +384,9 @@ static void exynos4_pm_resume(void)
exynos4_restore_pll();
+#ifdef CONFIG_SMP
scu_enable(S5P_VA_SCU);
+#endif
#ifdef CONFIG_CACHE_L2X0
s3c_pm_do_restore_core(exynos4_l2cc_save, ARRAY_SIZE(exynos4_l2cc_save));
diff --git a/arch/arm/mach-highbank/highbank.c b/arch/arm/mach-highbank/highbank.c
index 804c4a55f8038c75cbf0731168ee6d0d36de004a..8394d512a40227e0d5526fd6cc731137f1d108d6 100644
--- a/arch/arm/mach-highbank/highbank.c
+++ b/arch/arm/mach-highbank/highbank.c
@@ -25,7 +25,7 @@
#include
#include
-#include
+#include
#include
#include
#include
@@ -73,10 +73,8 @@ static void __init highbank_map_io(void)
void highbank_set_cpu_jump(int cpu, void *jump_addr)
{
-#ifdef CONFIG_SMP
cpu = cpu_logical_map(cpu);
-#endif
- writel(BSYM(virt_to_phys(jump_addr)), HB_JUMP_TABLE_VIRT(cpu));
+ writel(virt_to_phys(jump_addr), HB_JUMP_TABLE_VIRT(cpu));
__cpuc_flush_dcache_area(HB_JUMP_TABLE_VIRT(cpu), 16);
outer_clean_range(HB_JUMP_TABLE_PHYS(cpu),
HB_JUMP_TABLE_PHYS(cpu) + 15);
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 0e6de366c6482026157656ad3ea9f8866299ba50..4defb97bbfc866400fe57fe4c5178a778c30a91f 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -22,6 +22,18 @@ config ARCH_MX25
config MACH_MX27
bool
+config ARCH_MX5
+ bool
+
+config ARCH_MX50
+ bool
+
+config ARCH_MX51
+ bool
+
+config ARCH_MX53
+ bool
+
config SOC_IMX1
bool
select ARCH_MX1
@@ -73,6 +85,31 @@ config SOC_IMX35
select MXC_AVIC
select SMP_ON_UP if SMP
+config SOC_IMX5
+ select CPU_V7
+ select MXC_TZIC
+ select ARCH_MXC_IOMUX_V3
+ select ARCH_MXC_AUDMUX_V2
+ select ARCH_HAS_CPUFREQ
+ select ARCH_MX5
+ bool
+
+config SOC_IMX50
+ bool
+ select SOC_IMX5
+ select ARCH_MX50
+
+config SOC_IMX51
+ bool
+ select SOC_IMX5
+ select ARCH_MX5
+ select ARCH_MX51
+
+config SOC_IMX53
+ bool
+ select SOC_IMX5
+ select ARCH_MX5
+ select ARCH_MX53
if ARCH_IMX_V4_V5
@@ -592,6 +629,207 @@ config MACH_VPR200
Include support for VPR200 platform. This includes specific
configurations for the board and its peripherals.
+comment "i.MX5 platforms:"
+
+config MACH_MX50_RDP
+ bool "Support MX50 reference design platform"
+ depends on BROKEN
+ select SOC_IMX50
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for MX50 reference design platform (RDP) board. This
+ includes specific configurations for the board and its peripherals.
+
+comment "i.MX51 machines:"
+
+config MACH_IMX51_DT
+ bool "Support i.MX51 platforms from device tree"
+ select SOC_IMX51
+ select USE_OF
+ select MACH_MX51_BABBAGE
+ help
+ Include support for Freescale i.MX51 based platforms
+ using the device tree for discovery
+
+config MACH_MX51_BABBAGE
+ bool "Support MX51 BABBAGE platforms"
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for MX51 Babbage platform, also known as MX51EVK in
+ u-boot. This includes specific configurations for the board and its
+ peripherals.
+
+config MACH_MX51_3DS
+ bool "Support MX51PDK (3DS)"
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_DEBUG_BOARD
+ help
+ Include support for MX51PDK (3DS) platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_EUKREA_CPUIMX51
+ bool "Support Eukrea CPUIMX51 module"
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for Eukrea CPUIMX51 platform. This includes
+ specific configurations for the module and its peripherals.
+
+choice
+ prompt "Baseboard"
+ depends on MACH_EUKREA_CPUIMX51
+ default MACH_EUKREA_MBIMX51_BASEBOARD
+
+config MACH_EUKREA_MBIMX51_BASEBOARD
+ prompt "Eukrea MBIMX51 development board"
+ bool
+ select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select LEDS_GPIO_REGISTER
+ help
+ This adds board specific devices that can be found on Eukrea's
+ MBIMX51 evaluation board.
+
+endchoice
+
+config MACH_EUKREA_CPUIMX51SD
+ bool "Support Eukrea CPUIMX51SD module"
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_FSL_USB2_UDC
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_MXC_NAND
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ help
+ Include support for Eukrea CPUIMX51SD platform. This includes
+ specific configurations for the module and its peripherals.
+
+choice
+ prompt "Baseboard"
+ depends on MACH_EUKREA_CPUIMX51SD
+ default MACH_EUKREA_MBIMXSD51_BASEBOARD
+
+config MACH_EUKREA_MBIMXSD51_BASEBOARD
+ prompt "Eukrea MBIMXSD development board"
+ bool
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select LEDS_GPIO_REGISTER
+ help
+ This adds board specific devices that can be found on Eukrea's
+ MBIMXSD evaluation board.
+
+endchoice
+
+config MX51_EFIKA_COMMON
+ bool
+ select SOC_IMX51
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_MXC_EHCI
+ select IMX_HAVE_PLATFORM_PATA_IMX
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select MXC_ULPI if USB_ULPI
+
+config MACH_MX51_EFIKAMX
+ bool "Support MX51 Genesi Efika MX nettop"
+ select LEDS_GPIO_REGISTER
+ select MX51_EFIKA_COMMON
+ help
+ Include support for Genesi Efika MX nettop. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX51_EFIKASB
+ bool "Support MX51 Genesi Efika Smartbook"
+ select LEDS_GPIO_REGISTER
+ select MX51_EFIKA_COMMON
+ help
+ Include support for Genesi Efika Smartbook. This includes specific
+ configurations for the board and its peripherals.
+
+comment "i.MX53 machines:"
+
+config MACH_IMX53_DT
+ bool "Support i.MX53 platforms from device tree"
+ select SOC_IMX53
+ select USE_OF
+ select MACH_MX53_ARD
+ select MACH_MX53_EVK
+ select MACH_MX53_LOCO
+ select MACH_MX53_SMD
+ help
+ Include support for Freescale i.MX53 based platforms
+ using the device tree for discovery
+
+config MACH_MX53_EVK
+ bool "Support MX53 EVK platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_SPI_IMX
+ select LEDS_GPIO_REGISTER
+ help
+ Include support for MX53 EVK platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX53_SMD
+ bool "Support MX53 SMD platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ help
+ Include support for MX53 SMD platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX53_LOCO
+ bool "Support MX53 LOCO platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ select LEDS_GPIO_REGISTER
+ help
+ Include support for MX53 LOCO platform. This includes specific
+ configurations for the board and its peripherals.
+
+config MACH_MX53_ARD
+ bool "Support MX53 ARD platforms"
+ select SOC_IMX53
+ select IMX_HAVE_PLATFORM_IMX2_WDT
+ select IMX_HAVE_PLATFORM_IMX_I2C
+ select IMX_HAVE_PLATFORM_IMX_UART
+ select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
+ select IMX_HAVE_PLATFORM_GPIO_KEYS
+ help
+ Include support for MX53 ARD platform. This includes specific
+ configurations for the board and its peripherals.
+
comment "i.MX6 family:"
config SOC_IMX6Q
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index f5920c24f7d7eab486a8a340e4e6b6b785038483..55db9c488f2b408162e4bcca36f44d7cdb444ac0 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -11,6 +11,8 @@ obj-$(CONFIG_SOC_IMX27) += clock-imx27.o mm-imx27.o ehci-imx27.o
obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clock-imx31.o iomux-imx31.o ehci-imx31.o
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clock-imx35.o ehci-imx35.o
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o mm-imx5.o clock-mx51-mx53.o ehci-imx5.o pm-imx5.o cpu_op-mx51.o
+
# Support for CMOS sensor interface
obj-$(CONFIG_MX1_VIDEO) += mx1-camera-fiq.o mx1-camera-fiq-ksym.o
@@ -75,3 +77,22 @@ obj-$(CONFIG_SOC_IMX6Q) += clock-imx6q.o mach-imx6q.o
ifeq ($(CONFIG_PM),y)
obj-$(CONFIG_SOC_IMX6Q) += pm-imx6q.o
endif
+
+# i.MX5 based machines
+obj-$(CONFIG_MACH_MX51_BABBAGE) += mach-mx51_babbage.o
+obj-$(CONFIG_MACH_MX51_3DS) += mach-mx51_3ds.o
+obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o
+obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o
+obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o
+obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o
+obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o
+obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o
+obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o
+obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o
+obj-$(CONFIG_MACH_MX51_EFIKAMX) += mach-mx51_efikamx.o
+obj-$(CONFIG_MACH_MX51_EFIKASB) += mach-mx51_efikasb.o
+obj-$(CONFIG_MACH_MX50_RDP) += mach-mx50_rdp.o
+
+obj-$(CONFIG_MACH_IMX51_DT) += imx51-dt.o
+obj-$(CONFIG_MACH_IMX53_DT) += imx53-dt.o
diff --git a/arch/arm/mach-imx/Makefile.boot b/arch/arm/mach-imx/Makefile.boot
index 5f4d06af491262a6ac6d75d7bcdeaee74684a16b..6dfdbcc83afd7d4fb9e8245dfceed489e0c6970e 100644
--- a/arch/arm/mach-imx/Makefile.boot
+++ b/arch/arm/mach-imx/Makefile.boot
@@ -22,6 +22,18 @@ zreladdr-$(CONFIG_SOC_IMX35) += 0x80008000
params_phys-$(CONFIG_SOC_IMX35) := 0x80000100
initrd_phys-$(CONFIG_SOC_IMX35) := 0x80800000
+zreladdr-$(CONFIG_SOC_IMX50) += 0x70008000
+params_phys-$(CONFIG_SOC_IMX50) := 0x70000100
+initrd_phys-$(CONFIG_SOC_IMX50) := 0x70800000
+
+zreladdr-$(CONFIG_SOC_IMX51) += 0x90008000
+params_phys-$(CONFIG_SOC_IMX51) := 0x90000100
+initrd_phys-$(CONFIG_SOC_IMX51) := 0x90800000
+
+zreladdr-$(CONFIG_SOC_IMX53) += 0x70008000
+params_phys-$(CONFIG_SOC_IMX53) := 0x70000100
+initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000
+
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
diff --git a/arch/arm/mach-imx/clock-imx6q.c b/arch/arm/mach-imx/clock-imx6q.c
index 9273c2a24b540a12646c406ac82dedb6c27ca28b..2d88f8b9a454994bee6841cda4828d81286bac5e 100644
--- a/arch/arm/mach-imx/clock-imx6q.c
+++ b/arch/arm/mach-imx/clock-imx6q.c
@@ -814,6 +814,16 @@ DEF_PFD(pll3_pfd_540m, PFD_480, PFD1, &pll3_usb_otg);
DEF_PFD(pll3_pfd_508m, PFD_480, PFD2, &pll3_usb_otg);
DEF_PFD(pll3_pfd_454m, PFD_480, PFD3, &pll3_usb_otg);
+static unsigned long twd_clk_get_rate(struct clk *clk)
+{
+ return clk_get_rate(clk->parent) / 2;
+}
+
+static struct clk twd_clk = {
+ .parent = &arm_clk,
+ .get_rate = twd_clk_get_rate,
+};
+
static unsigned long pll2_200m_get_rate(struct clk *clk)
{
return clk_get_rate(clk->parent) / 2;
@@ -1894,6 +1904,7 @@ static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("20ec000.sdma", NULL, sdma_clk),
_REGISTER_CLOCK("20bc000.wdog", NULL, dummy_clk),
_REGISTER_CLOCK("20c0000.wdog", NULL, dummy_clk),
+ _REGISTER_CLOCK("smp_twd", NULL, twd_clk),
_REGISTER_CLOCK(NULL, "ckih", ckih_clk),
_REGISTER_CLOCK(NULL, "ckil_clk", ckil_clk),
_REGISTER_CLOCK(NULL, "aips_tz1_clk", aips_tz1_clk),
diff --git a/arch/arm/mach-mx5/clock-mx51-mx53.c b/arch/arm/mach-imx/clock-mx51-mx53.c
similarity index 99%
rename from arch/arm/mach-mx5/clock-mx51-mx53.c
rename to arch/arm/mach-imx/clock-mx51-mx53.c
index 4cb276977190e98174c70419a64a63696179ac73..08470504a088915f1cd0eea8e7ca1a3b25a41e32 100644
--- a/arch/arm/mach-mx5/clock-mx51-mx53.c
+++ b/arch/arm/mach-imx/clock-mx51-mx53.c
@@ -23,7 +23,7 @@
#include
#include
-#include "crm_regs.h"
+#include "crm-regs-imx5.h"
/* External clock values passed-in by the board code */
static unsigned long external_high_reference, external_low_reference;
diff --git a/arch/arm/mach-mx5/cpu.c b/arch/arm/mach-imx/cpu-imx5.c
similarity index 100%
rename from arch/arm/mach-mx5/cpu.c
rename to arch/arm/mach-imx/cpu-imx5.c
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.c b/arch/arm/mach-imx/cpu_op-mx51.c
similarity index 100%
rename from arch/arm/mach-mx5/cpu_op-mx51.c
rename to arch/arm/mach-imx/cpu_op-mx51.c
diff --git a/arch/arm/mach-mx5/cpu_op-mx51.h b/arch/arm/mach-imx/cpu_op-mx51.h
similarity index 100%
rename from arch/arm/mach-mx5/cpu_op-mx51.h
rename to arch/arm/mach-imx/cpu_op-mx51.h
diff --git a/arch/arm/mach-mx5/crm_regs.h b/arch/arm/mach-imx/crm-regs-imx5.h
similarity index 100%
rename from arch/arm/mach-mx5/crm_regs.h
rename to arch/arm/mach-imx/crm-regs-imx5.h
diff --git a/arch/arm/mach-mx5/devices-imx50.h b/arch/arm/mach-imx/devices-imx50.h
similarity index 100%
rename from arch/arm/mach-mx5/devices-imx50.h
rename to arch/arm/mach-imx/devices-imx50.h
diff --git a/arch/arm/mach-mx5/devices-imx51.h b/arch/arm/mach-imx/devices-imx51.h
similarity index 100%
rename from arch/arm/mach-mx5/devices-imx51.h
rename to arch/arm/mach-imx/devices-imx51.h
diff --git a/arch/arm/mach-mx5/devices-imx53.h b/arch/arm/mach-imx/devices-imx53.h
similarity index 100%
rename from arch/arm/mach-mx5/devices-imx53.h
rename to arch/arm/mach-imx/devices-imx53.h
diff --git a/arch/arm/mach-mx5/efika.h b/arch/arm/mach-imx/efika.h
similarity index 100%
rename from arch/arm/mach-mx5/efika.h
rename to arch/arm/mach-imx/efika.h
diff --git a/arch/arm/mach-mx5/ehci.c b/arch/arm/mach-imx/ehci-imx5.c
similarity index 100%
rename from arch/arm/mach-mx5/ehci.c
rename to arch/arm/mach-imx/ehci-imx5.c
diff --git a/arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
similarity index 100%
rename from arch/arm/mach-mx5/eukrea_mbimx51-baseboard.c
rename to arch/arm/mach-imx/eukrea_mbimx51-baseboard.c
diff --git a/arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c b/arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
similarity index 100%
rename from arch/arm/mach-mx5/eukrea_mbimxsd-baseboard.c
rename to arch/arm/mach-imx/eukrea_mbimxsd-baseboard.c
diff --git a/arch/arm/mach-mx5/imx51-dt.c b/arch/arm/mach-imx/imx51-dt.c
similarity index 100%
rename from arch/arm/mach-mx5/imx51-dt.c
rename to arch/arm/mach-imx/imx51-dt.c
diff --git a/arch/arm/mach-mx5/imx53-dt.c b/arch/arm/mach-imx/imx53-dt.c
similarity index 100%
rename from arch/arm/mach-mx5/imx53-dt.c
rename to arch/arm/mach-imx/imx53-dt.c
diff --git a/arch/arm/mach-mx5/board-cpuimx51.c b/arch/arm/mach-imx/mach-cpuimx51.c
similarity index 100%
rename from arch/arm/mach-mx5/board-cpuimx51.c
rename to arch/arm/mach-imx/mach-cpuimx51.c
diff --git a/arch/arm/mach-mx5/board-cpuimx51sd.c b/arch/arm/mach-imx/mach-cpuimx51sd.c
similarity index 100%
rename from arch/arm/mach-mx5/board-cpuimx51sd.c
rename to arch/arm/mach-imx/mach-cpuimx51sd.c
diff --git a/arch/arm/mach-mx5/board-mx50_rdp.c b/arch/arm/mach-imx/mach-mx50_rdp.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx50_rdp.c
rename to arch/arm/mach-imx/mach-mx50_rdp.c
diff --git a/arch/arm/mach-mx5/board-mx51_3ds.c b/arch/arm/mach-imx/mach-mx51_3ds.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_3ds.c
rename to arch/arm/mach-imx/mach-mx51_3ds.c
diff --git a/arch/arm/mach-mx5/board-mx51_babbage.c b/arch/arm/mach-imx/mach-mx51_babbage.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_babbage.c
rename to arch/arm/mach-imx/mach-mx51_babbage.c
diff --git a/arch/arm/mach-mx5/board-mx51_efikamx.c b/arch/arm/mach-imx/mach-mx51_efikamx.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_efikamx.c
rename to arch/arm/mach-imx/mach-mx51_efikamx.c
diff --git a/arch/arm/mach-mx5/board-mx51_efikasb.c b/arch/arm/mach-imx/mach-mx51_efikasb.c
similarity index 100%
rename from arch/arm/mach-mx5/board-mx51_efikasb.c
rename to arch/arm/mach-imx/mach-mx51_efikasb.c
diff --git a/arch/arm/mach-mx5/board-mx53_ard.c b/arch/arm/mach-imx/mach-mx53_ard.c
similarity index 99%
rename from arch/arm/mach-mx5/board-mx53_ard.c
rename to arch/arm/mach-imx/mach-mx53_ard.c
index 5f224f1c3eb638f6076e62b342956c4e2eaebe6d..753f4fc9ec04ae1ddf908a7ba9b124d7f27b4379 100644
--- a/arch/arm/mach-mx5/board-mx53_ard.c
+++ b/arch/arm/mach-imx/mach-mx53_ard.c
@@ -32,7 +32,6 @@
#include
#include
-#include "crm_regs.h"
#include "devices-imx53.h"
#define ARD_ETHERNET_INT_B IMX_GPIO_NR(2, 31)
@@ -189,8 +188,10 @@ static int weim_cs_config(void)
return -ENOMEM;
iomuxc_base = ioremap(MX53_IOMUXC_BASE_ADDR, SZ_4K);
- if (!iomuxc_base)
+ if (!iomuxc_base) {
+ iounmap(weim_base);
return -ENOMEM;
+ }
/* CS1 timings for LAN9220 */
writel(0x20001, (weim_base + 0x18));
diff --git a/arch/arm/mach-mx5/board-mx53_evk.c b/arch/arm/mach-imx/mach-mx53_evk.c
similarity index 99%
rename from arch/arm/mach-mx5/board-mx53_evk.c
rename to arch/arm/mach-imx/mach-mx53_evk.c
index d6ce137896d6adb69a167323dc9046d1b0b10718..5a72188b9cdb6e3ba8479a7b473c04a77d92080d 100644
--- a/arch/arm/mach-mx5/board-mx53_evk.c
+++ b/arch/arm/mach-imx/mach-mx53_evk.c
@@ -37,7 +37,6 @@
#define EVK_ECSPI1_CS1 IMX_GPIO_NR(3, 19)
#define MX53EVK_LED IMX_GPIO_NR(7, 7)
-#include "crm_regs.h"
#include "devices-imx53.h"
static iomux_v3_cfg_t mx53_evk_pads[] = {
diff --git a/arch/arm/mach-mx5/board-mx53_loco.c b/arch/arm/mach-imx/mach-mx53_loco.c
similarity index 99%
rename from arch/arm/mach-mx5/board-mx53_loco.c
rename to arch/arm/mach-imx/mach-mx53_loco.c
index fd8b524e1c58223c53f3b03bd5533a46dfec302d..37f67cac15a4daad2d803266503f6b2dfa81d4d0 100644
--- a/arch/arm/mach-mx5/board-mx53_loco.c
+++ b/arch/arm/mach-imx/mach-mx53_loco.c
@@ -32,7 +32,6 @@
#include
#include
-#include "crm_regs.h"
#include "devices-imx53.h"
#define MX53_LOCO_POWER IMX_GPIO_NR(1, 8)
diff --git a/arch/arm/mach-mx5/board-mx53_smd.c b/arch/arm/mach-imx/mach-mx53_smd.c
similarity index 99%
rename from arch/arm/mach-mx5/board-mx53_smd.c
rename to arch/arm/mach-imx/mach-mx53_smd.c
index 22c53c9b18aaa4ac6199068e04f07df535d42cb7..8e972c5c3e138bfebe6244b3da450937d1ede945 100644
--- a/arch/arm/mach-mx5/board-mx53_smd.c
+++ b/arch/arm/mach-imx/mach-mx53_smd.c
@@ -31,7 +31,6 @@
#include
#include
-#include "crm_regs.h"
#include "devices-imx53.h"
#define SMD_FEC_PHY_RST IMX_GPIO_NR(7, 6)
diff --git a/arch/arm/mach-mx5/mm.c b/arch/arm/mach-imx/mm-imx5.c
similarity index 100%
rename from arch/arm/mach-mx5/mm.c
rename to arch/arm/mach-imx/mm-imx5.c
diff --git a/arch/arm/mach-mx5/mx51_efika.c b/arch/arm/mach-imx/mx51_efika.c
similarity index 100%
rename from arch/arm/mach-mx5/mx51_efika.c
rename to arch/arm/mach-imx/mx51_efika.c
diff --git a/arch/arm/mach-mx5/system.c b/arch/arm/mach-imx/pm-imx5.c
similarity index 58%
rename from arch/arm/mach-mx5/system.c
rename to arch/arm/mach-imx/pm-imx5.c
index 5eebfaad1226d5384509e6cc2eaf982bb5d9c44d..6dc0934480577363a2d49a4a5646d69d6cc62729 100644
--- a/arch/arm/mach-mx5/system.c
+++ b/arch/arm/mach-imx/pm-imx5.c
@@ -1,8 +1,6 @@
/*
- * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
- */
-
-/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
@@ -10,14 +8,22 @@
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
-#include
+#include
+#include
#include
-#include
+#include
+#include
+#include
#include
-#include "crm_regs.h"
+#include
+#include "crm-regs-imx5.h"
+
+static struct clk *gpc_dvfs_clk;
-/* set cpu low power mode before WFI instruction. This function is called
- * mx5 because it can be used for mx50, mx51, and mx53.*/
+/*
+ * set cpu low power mode before WFI instruction. This function is called
+ * mx5 because it can be used for mx50, mx51, and mx53.
+ */
void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
{
u32 plat_lpc, arm_srpgcr, ccm_clpcr;
@@ -80,3 +86,68 @@ void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
__raw_writel(empgc1, MXC_SRPG_EMPGC1_SRPGCR);
}
}
+
+static int mx5_suspend_prepare(void)
+{
+ return clk_enable(gpc_dvfs_clk);
+}
+
+static int mx5_suspend_enter(suspend_state_t state)
+{
+ switch (state) {
+ case PM_SUSPEND_MEM:
+ mx5_cpu_lp_set(STOP_POWER_OFF);
+ break;
+ case PM_SUSPEND_STANDBY:
+ mx5_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (state == PM_SUSPEND_MEM) {
+ local_flush_tlb_all();
+ flush_cache_all();
+
+ /*clear the EMPGC0/1 bits */
+ __raw_writel(0, MXC_SRPG_EMPGC0_SRPGCR);
+ __raw_writel(0, MXC_SRPG_EMPGC1_SRPGCR);
+ }
+ cpu_do_idle();
+ return 0;
+}
+
+static void mx5_suspend_finish(void)
+{
+ clk_disable(gpc_dvfs_clk);
+}
+
+static int mx5_pm_valid(suspend_state_t state)
+{
+ return (state > PM_SUSPEND_ON && state <= PM_SUSPEND_MAX);
+}
+
+static const struct platform_suspend_ops mx5_suspend_ops = {
+ .valid = mx5_pm_valid,
+ .prepare = mx5_suspend_prepare,
+ .enter = mx5_suspend_enter,
+ .finish = mx5_suspend_finish,
+};
+
+static int __init mx5_pm_init(void)
+{
+ if (!cpu_is_mx51() && !cpu_is_mx53())
+ return 0;
+
+ if (gpc_dvfs_clk == NULL)
+ gpc_dvfs_clk = clk_get(NULL, "gpc_dvfs");
+
+ if (!IS_ERR(gpc_dvfs_clk)) {
+ if (cpu_is_mx51())
+ suspend_set_ops(&mx5_suspend_ops);
+ } else
+ return -EPERM;
+
+ return 0;
+}
+device_initcall(mx5_pm_init);
diff --git a/arch/arm/mach-imx/src.c b/arch/arm/mach-imx/src.c
index 4bde04f99e38ceda85fd4cb43f89bf2eb080ead7..e15f1555c59b1ebd2712ba8b8c31772c340b06ef 100644
--- a/arch/arm/mach-imx/src.c
+++ b/arch/arm/mach-imx/src.c
@@ -15,7 +15,7 @@
#include
#include
#include
-#include
+#include
#define SRC_SCR 0x000
#define SRC_GPR1 0x020
@@ -25,10 +25,6 @@
static void __iomem *src_base;
-#ifndef CONFIG_SMP
-#define cpu_logical_map(cpu) 0
-#endif
-
void imx_enable_cpu(int cpu, bool enable)
{
u32 mask, val;
@@ -43,7 +39,7 @@ void imx_enable_cpu(int cpu, bool enable)
void imx_set_cpu_jump(int cpu, void *jump_addr)
{
cpu = cpu_logical_map(cpu);
- writel_relaxed(BSYM(virt_to_phys(jump_addr)),
+ writel_relaxed(virt_to_phys(jump_addr),
src_base + SRC_GPR1 + cpu * 8);
}
diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c
index cc15426787b15531de64868f50ff782244e1218b..77d4852e19f283e3b06f1fd63e9ff61707f99146 100644
--- a/arch/arm/mach-kirkwood/common.c
+++ b/arch/arm/mach-kirkwood/common.c
@@ -27,6 +27,7 @@
#include
#include
#include
+#include
#include
#include
#include
@@ -73,7 +74,7 @@ unsigned int kirkwood_clk_ctrl = CGC_DUNIT | CGC_RESERVED;
void __init kirkwood_ehci_init(void)
{
kirkwood_clk_ctrl |= CGC_USB0;
- orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB);
+ orion_ehci_init(USB_PHYS_BASE, IRQ_KIRKWOOD_USB, EHCI_PHY_NA);
}
diff --git a/arch/arm/mach-kirkwood/mpp.h b/arch/arm/mach-kirkwood/mpp.h
index e8fda45c0736a866ead683af59f9b8a4d59d68f3..d5a0d1da2e0eb42b1f0e6f47172587d58e18e0d9 100644
--- a/arch/arm/mach-kirkwood/mpp.h
+++ b/arch/arm/mach-kirkwood/mpp.h
@@ -31,314 +31,314 @@
#define MPP_F6282_MASK MPP( 0, 0x0, 0, 0, 0, 0, 0, 0, 1 )
#define MPP0_GPIO MPP( 0, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP0_NF_IO2 MPP( 0, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP0_NF_IO2 MPP( 0, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP0_SPI_SCn MPP( 0, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP1_GPO MPP( 1, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP1_NF_IO3 MPP( 1, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP1_NF_IO3 MPP( 1, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP1_SPI_MOSI MPP( 1, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP2_GPO MPP( 2, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP2_NF_IO4 MPP( 2, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 1, 1, 1, 1, 1, 1 )
+#define MPP2_NF_IO4 MPP( 2, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP2_SPI_SCK MPP( 2, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP3_GPO MPP( 3, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP3_NF_IO5 MPP( 3, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP3_SPI_MISO MPP( 3, 0x2, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP3_NF_IO5 MPP( 3, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP3_SPI_MISO MPP( 3, 0x2, 0, 0, 1, 1, 1, 1, 1 )
#define MPP4_GPIO MPP( 4, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP4_NF_IO6 MPP( 4, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP4_UART0_RXD MPP( 4, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP4_NF_IO6 MPP( 4, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP4_UART0_RXD MPP( 4, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP4_SATA1_ACTn MPP( 4, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP4_LCD_VGA_HSYNC MPP( 4, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP4_PTP_CLK MPP( 4, 0xd, 1, 0, 1, 1, 1, 1, 0 )
+#define MPP4_PTP_CLK MPP( 4, 0xd, 0, 0, 1, 1, 1, 1, 0 )
#define MPP5_GPO MPP( 5, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP5_NF_IO7 MPP( 5, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP5_NF_IO7 MPP( 5, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_UART0_TXD MPP( 5, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP5_PTP_TRIG_GEN MPP( 5, 0x4, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP5_SATA0_ACTn MPP( 5, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP5_LCD_VGA_VSYNC MPP( 5, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 1, 1, 1, 1, 1, 0 )
+#define MPP6_SYSRST_OUTn MPP( 6, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP6_SPI_MOSI MPP( 6, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP6_PTP_TRIG_GEN MPP( 6, 0x3, 0, 0, 1, 1, 1, 1, 0 )
#define MPP7_GPO MPP( 7, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP7_PEX_RST_OUTn MPP( 7, 0x1, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP7_SPI_SCn MPP( 7, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP7_PTP_TRIG_GEN MPP( 7, 0x3, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP7_LCD_PWM MPP( 7, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP8_GPIO MPP( 8, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP8_TW0_SDA MPP( 8, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP8_MII0_RXERR MPP( 8, 0x4, 1, 0, 0, 1, 1, 1, 1 )
-#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP8_PTP_CLK MPP( 8, 0xc, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP8_MII0_COL MPP( 8, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP8_TW0_SDA MPP( 8, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART0_RTS MPP( 8, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_UART1_RTS MPP( 8, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP8_MII0_RXERR MPP( 8, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP8_SATA1_PRESENTn MPP( 8, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP8_PTP_CLK MPP( 8, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP8_MII0_COL MPP( 8, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP9_GPIO MPP( 9, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP9_TW0_SCK MPP( 9, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP9_UART0_CTS MPP( 9, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP9_UART1_CTS MPP( 9, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP9_MII0_CRS MPP( 9, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP9_TW0_SCK MPP( 9, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_UART0_CTS MPP( 9, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_UART1_CTS MPP( 9, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP9_SATA0_PRESENTn MPP( 9, 0x5, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP9_PTP_EVENT_REQ MPP( 9, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP9_MII0_CRS MPP( 9, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP10_GPO MPP( 10, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 1, 1, 1, 1, 1, 0 )
+#define MPP10_SPI_SCK MPP( 10, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_UART0_TXD MPP( 10, 0X3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP10_SATA1_ACTn MPP( 10, 0x5, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP10_PTP_TRIG_GEN MPP( 10, 0xc, 0, 0, 1, 1, 1, 1, 0 )
#define MPP11_GPIO MPP( 11, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP11_SPI_MISO MPP( 11, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP11_UART0_RXD MPP( 11, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 1, 1, 1, 1, 1, 0 )
-#define MPP11_PTP_CLK MPP( 11, 0xd, 1, 0, 1, 1, 1, 1, 0 )
-#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP11_SPI_MISO MPP( 11, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP11_UART0_RXD MPP( 11, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP11_PTP_EVENT_REQ MPP( 11, 0x4, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_PTP_TRIG_GEN MPP( 11, 0xc, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_PTP_CLK MPP( 11, 0xd, 0, 0, 1, 1, 1, 1, 0 )
+#define MPP11_SATA0_ACTn MPP( 11, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP12_GPO MPP( 12, 0x0, 0, 1, 1, 1, 1, 1, 1 )
#define MPP12_GPIO MPP( 12, 0x0, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP12_SD_CLK MPP( 12, 0x1, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP12_TW1_SDA MPP( 12, 0xd, 1, 0, 0, 0, 0, 0, 1 )
+#define MPP12_SD_CLK MPP( 12, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP12_AU_SPDIF0 MPP( 12, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP12_SPI_MOSI MPP( 12, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP12_TW1_SDA MPP( 12, 0xd, 0, 0, 0, 0, 0, 0, 1 )
#define MPP13_GPIO MPP( 13, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP13_SD_CMD MPP( 13, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP13_LCDPWM MPP( 13, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP13_SD_CMD MPP( 13, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP13_UART1_TXD MPP( 13, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP13_AU_SPDIFRMCLK MPP( 13, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP13_LCDPWM MPP( 13, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP14_GPIO MPP( 14, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP14_SD_D0 MPP( 14, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP14_UART1_RXD MPP( 14, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP14_AU_SPDIFI MPP( 14, 0xa, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP14_AU_I2SDI MPP( 14, 0xb, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP14_MII0_COL MPP( 14, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP14_SD_D0 MPP( 14, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP14_UART1_RXD MPP( 14, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP14_SATA1_PRESENTn MPP( 14, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP14_AU_SPDIFI MPP( 14, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP14_AU_I2SDI MPP( 14, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP14_MII0_COL MPP( 14, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP15_GPIO MPP( 15, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP15_SD_D1 MPP( 15, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP15_SD_D1 MPP( 15, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART0_RTS MPP( 15, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_UART1_TXD MPP( 15, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP15_SATA0_ACTn MPP( 15, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP15_SPI_CSn MPP( 15, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP16_GPIO MPP( 16, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP16_SD_D2 MPP( 16, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP16_UART0_CTS MPP( 16, 0x2, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP16_UART1_RXD MPP( 16, 0x3, 1, 0, 1, 1, 1, 1, 1 )
-#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 1, 0, 0, 0, 0, 0, 1 )
-#define MPP16_MII0_CRS MPP( 16, 0xd, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP16_SD_D2 MPP( 16, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_UART0_CTS MPP( 16, 0x2, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_UART1_RXD MPP( 16, 0x3, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP16_SATA1_ACTn MPP( 16, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP16_LCD_EXT_REF_CLK MPP( 16, 0xb, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP16_MII0_CRS MPP( 16, 0xd, 0, 0, 1, 1, 1, 1, 1 )
#define MPP17_GPIO MPP( 17, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP17_SD_D3 MPP( 17, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP17_TW1_SCK MPP( 17, 0xd, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP17_SD_D3 MPP( 17, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP17_SATA0_PRESENTn MPP( 17, 0x4, 0, 0, 0, 1, 1, 1, 1 )
+#define MPP17_SATA1_ACTn MPP( 17, 0xa, 0, 0, 0, 0, 0, 0, 1 )
+#define MPP17_TW1_SCK MPP( 17, 0xd, 0, 0, 0, 0, 0, 0, 1 )
#define MPP18_GPO MPP( 18, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP18_NF_IO0 MPP( 18, 0x1, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP18_NF_IO0 MPP( 18, 0x1, 0, 0, 1, 1, 1, 1, 1 )
+#define MPP18_PEX0_CLKREQ MPP( 18, 0x2, 0, 0, 0, 0, 0, 0, 1 )
#define MPP19_GPO MPP( 19, 0x0, 0, 1, 1, 1, 1, 1, 1 )
-#define MPP19_NF_IO1 MPP( 19, 0x1, 1, 1, 1, 1, 1, 1, 1 )
+#define MPP19_NF_IO1 MPP( 19, 0x1, 0, 0, 1, 1, 1, 1, 1 )
#define MPP20_GPIO MPP( 20, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP20_TSMP0 MPP( 20, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP20_TSMP0 MPP( 20, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP20_TDM_CH0_TX_QL MPP( 20, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP20_GE1_TXD0 MPP( 20, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP20_AU_SPDIFI MPP( 20, 0x4, 1, 0, 0, 0, 1, 1, 1 )
-#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP20_AU_SPDIFI MPP( 20, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP20_SATA1_ACTn MPP( 20, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP20_LCD_D0 MPP( 20, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP21_GPIO MPP( 21, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP21_TSMP1 MPP( 21, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP21_TSMP1 MPP( 21, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP21_TDM_CH0_RX_QL MPP( 21, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP21_GE1_TXD1 MPP( 21, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP21_AU_SPDIFO MPP( 21, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP21_SATA0_ACTn MPP( 21, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP21_LCD_D1 MPP( 21, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP22_GPIO MPP( 22, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP22_TSMP2 MPP( 22, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP22_TSMP2 MPP( 22, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP22_TDM_CH2_TX_QL MPP( 22, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP22_GE1_TXD2 MPP( 22, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP22_AU_SPDIFRMKCLK MPP( 22, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP22_SATA1_PRESENTn MPP( 22, 0x5, 0, 0, 0, 0, 1, 1, 1 )
#define MPP22_LCD_D2 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP23_GPIO MPP( 23, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP23_TSMP3 MPP( 23, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP23_TSMP3 MPP( 23, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP23_TDM_CH2_RX_QL MPP( 23, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP23_GE1_TXD3 MPP( 23, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 1, 0, 0, 1, 1, 1 )
-#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP23_AU_I2SBCLK MPP( 23, 0x4, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP23_SATA0_PRESENTn MPP( 23, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP23_LCD_D3 MPP( 23, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP24_GPIO MPP( 24, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP24_TSMP4 MPP( 24, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP24_TSMP4 MPP( 24, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP24_TDM_SPI_CS0 MPP( 24, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP24_GE1_RXD0 MPP( 24, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP24_AU_I2SDO MPP( 24, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP24_LCD_D4 MPP( 24, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP25_GPIO MPP( 25, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP25_TSMP5 MPP( 25, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP25_TSMP5 MPP( 25, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP25_TDM_SPI_SCK MPP( 25, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP25_GE1_RXD1 MPP( 25, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP25_AU_I2SLRCLK MPP( 25, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP25_LCD_D5 MPP( 25, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP26_GPIO MPP( 26, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP26_TSMP6 MPP( 26, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP26_TSMP6 MPP( 26, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP26_TDM_SPI_MISO MPP( 26, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP26_GE1_RXD2 MPP( 26, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP26_AU_I2SMCLK MPP( 26, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP26_LCD_D6 MPP( 26, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP27_GPIO MPP( 27, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP27_TSMP7 MPP( 27, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP27_TSMP7 MPP( 27, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP27_TDM_SPI_MOSI MPP( 27, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP27_GE1_RXD3 MPP( 27, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP27_AU_I2SDI MPP( 27, 0x4, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP27_AU_I2SDI MPP( 27, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP27_LCD_D7 MPP( 27, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP28_GPIO MPP( 28, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP28_TSMP8 MPP( 28, 0x1, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP28_TSMP8 MPP( 28, 0x1, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_TDM_CODEC_INTn MPP( 28, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_GE1_COL MPP( 28, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP28_AU_EXTCLK MPP( 28, 0x4, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP28_AU_EXTCLK MPP( 28, 0x4, 0, 0, 0, 0, 1, 1, 1 )
#define MPP28_LCD_D8 MPP( 28, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP29_GPIO MPP( 29, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP29_TSMP9 MPP( 29, 0x1, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP29_TSMP9 MPP( 29, 0x1, 0, 0, 0, 0, 1, 1, 1 )
#define MPP29_TDM_CODEC_RSTn MPP( 29, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP29_GE1_TCLK MPP( 29, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP29_LCD_D9 MPP( 29, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP30_GPIO MPP( 30, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP30_TSMP10 MPP( 30, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP30_TDM_PCLK MPP( 30, 0x2, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP30_TSMP10 MPP( 30, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP30_TDM_PCLK MPP( 30, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP30_GE1_RXCTL MPP( 30, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP30_LCD_D10 MPP( 30, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP31_GPIO MPP( 31, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP31_TSMP11 MPP( 31, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP31_TDM_FS MPP( 31, 0x2, 1, 1, 0, 0, 1, 1, 1 )
+#define MPP31_TSMP11 MPP( 31, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP31_TDM_FS MPP( 31, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP31_GE1_RXCLK MPP( 31, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP31_LCD_D11 MPP( 31, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP32_GPIO MPP( 32, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP32_TSMP12 MPP( 32, 0x1, 1, 1, 0, 0, 1, 1, 1 )
-#define MPP32_TDM_DRX MPP( 32, 0x2, 1, 0, 0, 0, 1, 1, 1 )
+#define MPP32_TSMP12 MPP( 32, 0x1, 0, 0, 0, 0, 1, 1, 1 )
+#define MPP32_TDM_DRX MPP( 32, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP32_GE1_TCLKOUT MPP( 32, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP32_LCD_D12 MPP( 32, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP33_GPO MPP( 33, 0x0, 0, 1, 0, 1, 1, 1, 1 )
-#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP33_TDM_DTX MPP( 33, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP33_GE1_TXCTL MPP( 33, 0x3, 0, 0, 0, 1, 1, 1, 1 )
#define MPP33_LCD_D13 MPP( 33, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP34_GPIO MPP( 34, 0x0, 1, 1, 0, 1, 1, 1, 1 )
-#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP34_TDM_SPI_CS1 MPP( 34, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP34_GE1_TXEN MPP( 34, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 1, 0, 0, 0, 1, 1 )
+#define MPP34_SATA1_ACTn MPP( 34, 0x5, 0, 0, 0, 0, 0, 1, 1 )
#define MPP34_LCD_D14 MPP( 34, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP35_GPIO MPP( 35, 0x0, 1, 1, 1, 1, 1, 1, 1 )
-#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 1, 0, 0, 1, 1, 1 )
+#define MPP35_TDM_CH0_TX_QL MPP( 35, 0x2, 0, 0, 0, 0, 1, 1, 1 )
#define MPP35_GE1_RXERR MPP( 35, 0x3, 0, 0, 0, 1, 1, 1, 1 )
-#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 1, 0, 1, 1, 1, 1 )
+#define MPP35_SATA0_ACTn MPP( 35, 0x5, 0, 0, 0, 1, 1, 1, 1 )
#define MPP35_LCD_D15 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
-#define MPP35_MII0_RXERR MPP( 35, 0xc, 1, 0, 1, 1, 1, 1, 1 )
+#define MPP35_MII0_RXERR MPP( 35, 0xc, 0, 0, 1, 1, 1, 1, 1 )
#define MPP36_GPIO MPP( 36, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP36_TSMP0 MPP( 36, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP36_AU_SPDIFI MPP( 36, 0x4, 1, 0, 1, 0, 0, 1, 1 )
-#define MPP36_TW1_SDA MPP( 36, 0xb, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP36_TSMP0 MPP( 36, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP36_TDM_SPI_CS1 MPP( 36, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP36_AU_SPDIFI MPP( 36, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP36_TW1_SDA MPP( 36, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP37_GPIO MPP( 37, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP37_TSMP1 MPP( 37, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 1, 1, 0, 0, 1, 1 )
-#define MPP37_TW1_SCK MPP( 37, 0xb, 1, 1, 0, 0, 0, 0, 1 )
+#define MPP37_TSMP1 MPP( 37, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP37_TDM_CH2_TX_QL MPP( 37, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP37_AU_SPDIFO MPP( 37, 0x4, 0, 0, 1, 0, 0, 1, 1 )
+#define MPP37_TW1_SCK MPP( 37, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP38_GPIO MPP( 38, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP38_TSMP2 MPP( 38, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP38_TSMP2 MPP( 38, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP38_TDM_CH2_RX_QL MPP( 38, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP38_AU_SPDIFRMLCLK MPP( 38, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP38_LCD_D18 MPP( 38, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP39_GPIO MPP( 39, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP39_TSMP3 MPP( 39, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP39_TSMP3 MPP( 39, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP39_TDM_SPI_CS0 MPP( 39, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP39_AU_I2SBCLK MPP( 39, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP39_LCD_D19 MPP( 39, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP40_GPIO MPP( 40, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP40_TSMP4 MPP( 40, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP40_TSMP4 MPP( 40, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP40_TDM_SPI_SCK MPP( 40, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP40_AU_I2SDO MPP( 40, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP40_LCD_D20 MPP( 40, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP41_GPIO MPP( 41, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP41_TSMP5 MPP( 41, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 1, 0, 0, 0, 0, 1, 1 )
-#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP41_TSMP5 MPP( 41, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP41_TDM_SPI_MISO MPP( 41, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP41_AU_I2SLRCLK MPP( 41, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP41_LCD_D21 MPP( 41, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP42_GPIO MPP( 42, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP42_TSMP6 MPP( 42, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 1, 1, 0, 0, 1, 1 )
+#define MPP42_TSMP6 MPP( 42, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP42_TDM_SPI_MOSI MPP( 42, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP42_AU_I2SMCLK MPP( 42, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP42_LCD_D22 MPP( 42, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP43_GPIO MPP( 43, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP43_TSMP7 MPP( 43, 0x1, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP43_TSMP7 MPP( 43, 0x1, 0, 0, 0, 0, 0, 1, 1 )
#define MPP43_TDM_CODEC_INTn MPP( 43, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP43_AU_I2SDI MPP( 43, 0x4, 1, 0, 1, 0, 0, 1, 1 )
+#define MPP43_AU_I2SDI MPP( 43, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP43_LCD_D23 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP44_GPIO MPP( 44, 0x0, 1, 1, 1, 0, 0, 1, 1 )
-#define MPP44_TSMP8 MPP( 44, 0x1, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP44_TSMP8 MPP( 44, 0x1, 0, 0, 0, 0, 0, 1, 1 )
#define MPP44_TDM_CODEC_RSTn MPP( 44, 0x2, 0, 0, 0, 0, 0, 1, 1 )
-#define MPP44_AU_EXTCLK MPP( 44, 0x4, 1, 0, 1, 0, 0, 1, 1 )
+#define MPP44_AU_EXTCLK MPP( 44, 0x4, 0, 0, 1, 0, 0, 1, 1 )
#define MPP44_LCD_CLK MPP( 44, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP45_GPIO MPP( 45, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP45_TSMP9 MPP( 45, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP45_TDM_PCLK MPP( 45, 0x2, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP45_TSMP9 MPP( 45, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP45_TDM_PCLK MPP( 45, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP245_LCD_E MPP( 45, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP46_GPIO MPP( 46, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP46_TSMP10 MPP( 46, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP46_TDM_FS MPP( 46, 0x2, 1, 1, 0, 0, 0, 1, 1 )
+#define MPP46_TSMP10 MPP( 46, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP46_TDM_FS MPP( 46, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP46_LCD_HSYNC MPP( 46, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP47_GPIO MPP( 47, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP47_TSMP11 MPP( 47, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP47_TDM_DRX MPP( 47, 0x2, 1, 0, 0, 0, 0, 1, 1 )
+#define MPP47_TSMP11 MPP( 47, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP47_TDM_DRX MPP( 47, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP47_LCD_VSYNC MPP( 47, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP48_GPIO MPP( 48, 0x0, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP48_TSMP12 MPP( 48, 0x1, 1, 1, 0, 0, 0, 1, 1 )
-#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 1, 0, 0, 0, 1, 1 )
+#define MPP48_TSMP12 MPP( 48, 0x1, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP48_TDM_DTX MPP( 48, 0x2, 0, 0, 0, 0, 0, 1, 1 )
#define MPP48_LCD_D16 MPP( 22, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP49_GPIO MPP( 49, 0x0, 1, 1, 0, 0, 0, 1, 0 )
#define MPP49_GPO MPP( 49, 0x0, 0, 1, 0, 0, 0, 0, 1 )
-#define MPP49_TSMP9 MPP( 49, 0x1, 1, 1, 0, 0, 0, 1, 0 )
-#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 1, 0, 0, 0, 1, 1 )
-#define MPP49_PTP_CLK MPP( 49, 0x5, 1, 0, 0, 0, 0, 1, 0 )
-#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 1, 0, 0, 0, 0, 1 )
+#define MPP49_TSMP9 MPP( 49, 0x1, 0, 0, 0, 0, 0, 1, 0 )
+#define MPP49_TDM_CH0_RX_QL MPP( 49, 0x2, 0, 0, 0, 0, 0, 1, 1 )
+#define MPP49_PTP_CLK MPP( 49, 0x5, 0, 0, 0, 0, 0, 1, 0 )
+#define MPP49_PEX0_CLKREQ MPP( 49, 0xa, 0, 0, 0, 0, 0, 0, 1 )
#define MPP49_LCD_D17 MPP( 49, 0xb, 0, 0, 0, 0, 0, 0, 1 )
#define MPP_MAX 49
diff --git a/arch/arm/mach-msm/headsmp.S b/arch/arm/mach-msm/headsmp.S
index 0c631a9f8647f5b8ec35dd5998da65bc937860d0..bcd5af223deabaf48451bf3a4d67cea23c82566e 100644
--- a/arch/arm/mach-msm/headsmp.S
+++ b/arch/arm/mach-msm/headsmp.S
@@ -34,6 +34,7 @@ pen: ldr r7, [r6]
* should now contain the SVC stack for this core
*/
b secondary_startup
+ENDPROC(msm_secondary_startup)
.align
1: .long .
diff --git a/arch/arm/mach-msm/hotplug.c b/arch/arm/mach-msm/hotplug.c
index 41c252de0215b3c66aaad2c7074d90230b431c19..a446fc14221f6f0394806fb32af411ef2742e85e 100644
--- a/arch/arm/mach-msm/hotplug.c
+++ b/arch/arm/mach-msm/hotplug.c
@@ -11,6 +11,7 @@
#include
#include
+#include
extern volatile int pen_release;
diff --git a/arch/arm/mach-msm/platsmp.c b/arch/arm/mach-msm/platsmp.c
index 0b3e357c4c8c8166e144a023a059336bddb660d7..db0117ec55f4ad32a10d154d1eb2c41654a73bac 100644
--- a/arch/arm/mach-msm/platsmp.c
+++ b/arch/arm/mach-msm/platsmp.c
@@ -20,6 +20,7 @@
#include
#include
#include
+#include
#include