Pull arm64 fix from Catalin Marinas:
 "A previous commit to prevent AML memory opregions from accessing the
  kernel memory turned out to be too restrictive. Relax the permission
  check to permit the ACPI core to map kernel memory used for table
  overrides"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: permit ACPI core to map kernel memory used for table overrides

Pull drm fixes from Dave Airlie:
 "AMD and vmwgfx fixes.

  Just dequeuing these a bit early as the AMD ones are bit larger than
  I'd prefer, but Alex missed last week so it's a double set of fixes.
  The larger ones are just register header fixes for the new chips that
  were just introduced in rc1 along with some new PCI IDs for new hw.
  Otherwise it is usual fixes.

  The vmwgfx fix was due to some testing I was doing and found we
  weren't booting properly, vmware had the fix internally so hurried it

  vmwgfx:
   - fix a regression due to TTM refactor

  amdgpu:
   - Fix potential double free in userptr handling
   - Sienna Cichlid and Navy Flounder udpates
   - Add Sienna Cichlid PCI IDs
   - Drop experimental flag for navi12
   - Raven fixes
   - Renoir fixes
   - HDCP fix
   - DCN3 fix for clang and older versions of gcc
   - Fix a runtime pm refcount issue"

* tag 'drm-fixes-2020-10-01-1' of git://anongit.freedesktop.org/drm/drm:
  drm/amdgpu: disable gfxoff temporarily for navy_flounder
  drm/amd/pm: setup APU dpm clock table in SMU HW initialization
  drm/vmwgfx: Fix error handling in get_node
  drm/amd/display: remove duplicate call to rn_vbios_smu_get_smu_version()
  drm/amdgpu/swsmu/smu12: fix force clock handling for mclk
  drm/amdgpu: restore proper ref count in amdgpu_display_crtc_set_config
  drm/amdgpu/display: fix CFLAGS setup for DCN30
  drm/amd/display: fix return value check for hdcp_work
  drm/amdgpu: remove gpu_info fw support for sienna_cichlid etc.
  drm/amd/pm: Removed fixed clock in auto mode DPM
  drm/amdgpu: remove experimental flag from navi12
  drm/amdgpu: add device ID for sienna_cichlid (v2)
  drm/amdgpu: use the AV1 defines for VCN 3.0
  drm/amdgpu: add VCN 3.0 AV1 registers
  drm/amdgpu: add the GC 10.3 VRS registers
  drm/amdgpu: prevent double kfree ttm->sg

Pull tracing fixes from Steven Rostedt:
 "Two tracing fixes:

   - Fix temp buffer accounting that caused a WARNING for
     ftrace_dump_on_opps()

   - Move the recursion check in one of the function callback helpers to
     the beginning of the function, as if the rcu_is_watching() gets
     traced, it will cause a recursive loop that will crash the kernel"

* tag 'trace-v5.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  ftrace: Move RCU is watching check after recursion check
  tracing: Fix trace_find_next_entry() accounting of temp buffer size

Merge tag 'amd-drm-fixes-5.9-2020-09-30' of git://people.freedesktop.org/~agd5f/linux

 into drm-fixes

amd-drm-fixes-5.9-2020-09-30:

amdgpu:
- Fix potential double free in userptr handling
- Sienna Cichlid and Navy Flounder udpates
- Add Sienna Cichlid PCI IDs
- Drop experimental flag for navi12
- Raven fixes
- Renoir fixes
- HDCP fix
- DCN3 fix for clang and older versions of gcc
- Fix a runtime pm refcount issue

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930161326.4243-1-alexander.deucher@amd.com

Jonathan reports that the strict policy for memory mapped by the
ACPI core breaks the use case of passing ACPI table overrides via
initramfs. This is due to the fact that the memory type used for
loading the initramfs in memory is not recognized as a memory type
that is typically used by firmware to pass firmware tables.

Since the purpose of the strict policy is to ensure that no AML or
other ACPI code can manipulate any memory that is used by the kernel
to keep its internal state or the state of user tasks, we can relax
the permission check, and allow mappings of memory that is reserved
and marked as NOMAP via memblock, and therefore not covered by the
linear mapping to begin with.

Fixes: 1583052d ("arm64/acpi: disallow AML memory opregions to access kernel memory")
Fixes: 325f5585 ("arm64/acpi: disallow writeable AML opregion mapping for EFI code regions")
Reported-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Link: https://lore.kernel.org/r/20200929132522.18067-1-ardb@kernel.org


Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

Pull clk fixes from Stephen Boyd:
 "Another batch of clk driver fixes:

   - Make sure DRAM and ChipID region doesn't get disabled on Exynos

   - Fix a SATA failure on Tegra

   - Fix the emac_ptp clk divider on stratix10"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: socfpga: stratix10: fix the divider for the emac_ptp_free_clk
  clk: samsung: exynos4: mark 'chipid' clock as CLK_IGNORE_UNUSED
  clk: tegra: Fix missing prototype for tegra210_clk_register_emc()
  clk: tegra: Always program PLL_E when enabled
  clk: tegra: Capitalization fixes
  clk: samsung: Keep top BPLL mux on Exynos542x enabled

gfxoff is temporarily disabled for navy_flounder, since
at present the feature caused some tdr when performing
display operations.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Tao Zhou <tao.zhou1@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As the dpm clock table is needed during DC HW initialization.
And that (DC HW initialization) comes before smu_late_init()
where current APU dpm clock table setup is performed. So, NULL
pointer dereference will be triggered. By moving APU dpm clock
table setup to smu_hw_init(), this can be avoided.

Fixes: 02cf91c1 ("drm/amd/powerplay: postpone operations not required for hw setup to late_init")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reported-by: Dirk Gouders <dirk@gouders.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

One vmwgfx regression fix.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: "Roland Scheidegger (VMware)" <rscheidegger.oss@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200930041000.2423-1-rscheidegger.oss@gmail.com

ttm_mem_type_manager_func.get_node was changed to return -ENOSPC
instead of setting the node pointer to NULL. Unfortunately
vmwgfx still had two places where it was explicitly converting
-ENOSPC to 0 causing regressions. This fixes those spots by
allowing -ENOSPC to be returned. That seems to fix recent
regressions with vmwgfx.

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Reviewed-by: Martin Krastev <krastevm@vmware.com>
Sigend-off-by: Roland Scheidegger <sroland@vmware.com>

Pull devicetree fixes from Rob Herring:

 - Fix handling of HOST_EXTRACFLAGS for dtc

 - Several warning fixes for DT bindings

* tag 'devicetree-fixes-for-5.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  scripts/dtc: only append to HOST_EXTRACFLAGS instead of overwriting
  dt-bindings: Fix 'reg' size issues in zynqmp examples
  ARM: dts: bcm2835: Change firmware compatible from simple-bus to simple-mfd
  dt-bindings: leds: cznic,turris-omnia-leds: fix error in binding
  dt-bindings: crypto: sa2ul: fix a DT binding check warning

autofs got broken in some configurations by commit 13c164b1
("autofs: switch to kernel_write") because there is now an extra LSM
permission check done by security_file_permission() in rw_verify_area().

autofs is one if the few places that really does want the much more
limited __kernel_write(), because the write is an internal kernel one
that shouldn't do any user permission checks (it also doesn't need the
file_start_write/file_end_write logic, since it's just a pipe).

There are a couple of other cases like that - accounting, core dumping,
and splice - but autofs stands out because it can be built as a module.

As a result, we need to export this internal __kernel_write() function
again.

We really don't want any other module to use this, but we don't have a
"EXPORT_SYMBOL_FOR_AUTOFS_ONLY()".  But we can mark it GPL-only to at
least approximate that "internal use only" for licensing.

While in this area, make autofs pass in NULL for the file position
pointer, since it's always a pipe, and we now use a NULL file pointer
for streaming file descriptors (see file_ppos() and commit 438ab720:
"vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files")

This effectively reverts commits 9db97752 ("fs: unexport
__kernel_write") and 13c164b1 ("autofs: switch to kernel_write").

Fixes: 13c164b1 ("autofs: switch to kernel_write")
Reported-by: Ondrej Mosnacek <omosnace@redhat.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Acked-by: Acked-by: Ian Kent <raven@themaw.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 78fe9f63 ("drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions")
added a call to rn_vbios_smu_get_smu_version() to set clk_mgr->smu_ver.
That field is initialized prior to the if-statement, already.

Fixes: 78fe9f63 (drm/amd/display: Remove DISPCLK Limit Floor for Certain SMU Versions)
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sung Lee <sung.lee@amd.com>
Cc: Yongqiang Sun <yongqiang.sun@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The state array is in the reverse order compared to other asics
(high to low rather than low to high).

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1313


Reviewed-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

A recent attempt to fix a ref count leak in
amdgpu_display_crtc_set_config() turned out to be doing too much and
"fixed" an intended decrease as if it were a leak. Undo that part to
restore the proper balance. This is the very nature of this function
to increase or decrease the power reference count depending on the
situation.

Consequences of this bug is that the power reference would
eventually get down to 0 while the display was still in use,
resulting in that display switching off unexpectedly.

Signed-off-by: Jean Delvare <jdelvare@suse.de>
Fixes: e008fa6f ("drm/amdgpu: fix ref count leak in amdgpu_display_crtc_set_config")
Cc: stable@vger.kernel.org
Cc: Navid Emamdoost <navid.emamdoost@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Properly handle clang and older versions of gcc.

Fixes: e77165bf ("drm/amd/display: Add DCN3 blocks to Makefile")
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

max_caps might be 0, thus hdcp_work might be ZERO_SIZE_PTR

Signed-off-by: Flora Cui <flora.cui@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Remove gpu_info fw support for sienna_cichlid etc., since the
information can be retrieved from discovery binary.

Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

SMU10_UMD_PSTATE_PEAK_FCLK value should not be used to set the DPM.

Suggested-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When building with

	$ HOST_EXTRACFLAGS=-g make

the expectation is that host tools are built with debug informations.
This however doesn't happen if the Makefile assigns a new value to the
HOST_EXTRACFLAGS instead of appending to it. So use += instead of := for
the first assignment.

Fixes: e3fd9b53 ("scripts/dtc: consolidate include path options in Makefile")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Herring <robh@kernel.org>

The default sizes in examples for 'reg' are 1 cell each. Fix the
incorrect sizes in zynqmp examples:

Documentation/devicetree/bindings/dma/xilinx/xlnx,zynqmp-dpdma.example.dt.yaml: example-0: dma-controller@fd4c0000:reg:0: [0, 4249616384, 0, 4096] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:0: [0, 4249485312, 0, 4096] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:1: [0, 4249526272, 0, 4096] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:2: [0, 4249530368, 0, 4096] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml
Documentation/devicetree/bindings/display/xlnx/xlnx,zynqmp-dpsub.example.dt.yaml: example-0: display@fd4a0000:reg:3: [0, 4249534464, 0, 4096] is too long
	From schema: /usr/local/lib/python3.8/dist-packages/dtschema/schemas/reg.yaml

Cc: Hyun Kwon <hyun.kwon@xilinx.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Vinod Koul <vkoul@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Cc: dmaengine@vger.kernel.org
Acked-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Rob Herring <robh@kernel.org>

Pull dmaengine fix from Vinod Koul:
 "Fix dmatest for misconfigured channel"

* tag 'dmaengine-fix-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: dmatest: Prevent to run on misconfigured channel

Pull virtio fixes from Michael Tsirkin:
 "A couple of last minute fixes"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost-vdpa: fix backend feature ioctls
  vhost: Fix documentation

The first thing that the ftrace function callback helper functions should do
is to check for recursion. Peter Zijlstra found that when
"rcu_is_watching()" had its notrace removed, it caused perf function tracing
to crash. This is because the call of rcu_is_watching() is tested before
function recursion is checked and and if it is traced, it will cause an
infinite recursion loop.

rcu_is_watching() should still stay notrace, but to prevent this should
never had crashed in the first place. The recursion prevention must be the
first thing done in callback functions.

Link: https://lore.kernel.org/r/20200929112541.GM2628@hirez.programming.kicks-ass.net



Cc: stable@vger.kernel.org
Cc: Paul McKenney <paulmck@kernel.org>
Fixes: c68c0fa2 ("ftrace: Have ftrace_ops_get_func() handle RCU and PER_CPU flags too")
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

The temp buffer size variable for trace_find_next_entry() was incorrectly
being updated when the size did not change. The temp buffer size should only
be updated when it is reallocated.

This is mostly an issue when used with ftrace_dump(). That's because
ftrace_dump() can not allocate a new buffer, and instead uses a temporary
buffer with a fix size. But the variable that keeps track of that size is
incorrectly updated with each call, and it could fall into the path that
would try to reallocate the buffer and produce a warning.

 ------------[ cut here ]------------
 WARNING: CPU: 1 PID: 1601 at kernel/trace/trace.c:3548
trace_find_next_entry+0xd0/0xe0
 Modules linked in [..]
 CPU: 1 PID: 1601 Comm: bash Not tainted 5.9.0-rc5-test+ #521
 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03
07/14/2016
 RIP: 0010:trace_find_next_entry+0xd0/0xe0
 Code: 40 21 00 00 4c 89 e1 31 d2 4c 89 ee 48 89 df e8 c6 9e ff ff 89 ab 54
21 00 00 5b 5d 41 5c 41 5d c3 48 63 d5 eb bf 31 c0 eb f0 <0f> 0b 48 63 d5 eb
b4 66 0f 1f 84 00 00 00 00 00 53 48 8d 8f 60 21
 RSP: 0018:ffff95a4f2e8bd70 EFLAGS: 00010046
 RAX: ffffffff96679fc0 RBX: ffffffff97910de0 RCX: ffffffff96679fc0
 RDX: ffff95a4f2e8bd98 RSI: ffff95a4ee321098 RDI: ffffffff97913000
 RBP: 0000000000000018 R08: 0000000000000000 R09: 0000000000000000
 R10: 0000000000000001 R11: 0000000000000046 R12: ffff95a4f2e8bd98
 R13: 0000000000000000 R14: ffff95a4ee321098 R15: 00000000009aa301
 FS:  00007f8565484740(0000) GS:ffff95a55aa40000(0000)
knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 000055876bd43d90 CR3: 00000000b76e6003 CR4: 00000000001706e0
 Call Trace:
  trace_print_lat_context+0x58/0x2d0
  ? cpumask_next+0x16/0x20
  print_trace_line+0x1a4/0x4f0
  ftrace_dump.cold+0xad/0x12c
  __handle_sysrq.cold+0x51/0x126
  write_sysrq_trigger+0x3f/0x4a
  proc_reg_write+0x53/0x80
  vfs_write+0xca/0x210
  ksys_write+0x70/0xf0
  do_syscall_64+0x33/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f8565579487
 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa
64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff
77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
 RSP: 002b:00007ffd40707948 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
 RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007f8565579487
 RDX: 0000000000000002 RSI: 000055876bd74de0 RDI: 0000000000000001
 RBP: 000055876bd74de0 R08: 000000000000000a R09: 0000000000000001
 R10: 000055876bdec280 R11: 0000000000000246 R12: 0000000000000002
 R13: 00007f856564a500 R14: 0000000000000002 R15: 00007f856564a700
 irq event stamp: 109958
 ---[ end trace 7aab5b7e51484b00 ]---

Not only fix the updating of the temp buffer, but also do not free the temp
buffer before a new buffer is allocated (there's no reason to not continue
to use the current temp buffer if an allocation fails).

Cc: stable@vger.kernel.org
Fixes: 8e99cf91 ("tracing: Do not allocate buffer in trace_find_next_entry() in atomic")
Reported-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

   - NFSv4.2: copy_file_range needs to invalidate caches on success

   - NFSv4.2: Fix security label length not being reset

   - pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly
     on read

   - pNFS/flexfiles: Fix signed/unsigned type issues with mirror
     indices"

* tag 'nfs-for-5.9-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  pNFS/flexfiles: Be consistent about mirror index types
  pNFS/flexfiles: Ensure we initialise the mirror bsizes correctly on read
  NFSv4.2: fix client's attribute cache management for copy_file_range
  nfs: Fix security label length not being reset

It seems likely this block was pasted from internal_get_user_pages_fast,
which is not passed an mm struct and therefore uses current's.  But
__get_user_pages_locked is passed an explicit mm, and current->mm is not
always valid. This was hit when being called from i915, which uses:

  pin_user_pages_remote->
    __get_user_pages_remote->
      __gup_longterm_locked->
        __get_user_pages_locked

Before, this would lead to an OOPS:

  BUG: kernel NULL pointer dereference, address: 0000000000000064
  #PF: supervisor write access in kernel mode
  #PF: error_code(0x0002) - not-present page
  CPU: 10 PID: 1431 Comm: kworker/u33:1 Tainted: P S   U     O      5.9.0-rc7+ #140
  Hardware name: LENOVO 20QTCTO1WW/20QTCTO1WW, BIOS N2OET47W (1.34 ) 08/06/2020
  Workqueue: i915-userptr-acquire __i915_gem_userptr_get_pages_worker [i915]
  RIP: 0010:__get_user_pages_remote+0xd7/0x310
  Call Trace:
   __i915_gem_userptr_get_pages_worker+0xc8/0x260 [i915]
   process_one_work+0x1ca/0x390
   worker_thread+0x48/0x3c0
   kthread+0x114/0x130
   ret_from_fork+0x1f/0x30
  CR2: 0000000000000064

This commit fixes the problem by using the mm pointer passed to the
function rather than the bogus one in current.

Fixes: 008cfe44 ("mm: Introduce mm_struct.has_pinned")
Tested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reported-by: Harald Arnesen <harald@skogtun.org>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The current binding for the RPi firmware uses the simple-bus compatible as
a fallback to benefit from its automatic probing of child nodes.

However, simple-bus also comes with some constraints, like having the ranges,
our case.

Let's switch to simple-mfd that provides the same probing logic without
those constraints.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200924082642.18144-1-maxime@cerno.tech


Signed-off-by: Rob Herring <robh@kernel.org>

Merge tag 'kbuild-fixes-v5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - ignore compiler stubs for PPC to fix builds

 - fix the usage of --target mentioned in the LLVM document

* tag 'kbuild-fixes-v5.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Documentation/llvm: Fix clang target examples
  scripts/kallsyms: skip ppc compiler stub *.long_branch.* / *.plt_branch.*

Pull x86 fixes from Thomas Gleixner:
 "Two fixes for the x86 interrupt code:

   - Unbreak the magic 'search the timer interrupt' logic in IO/APIC
     code which got wreckaged when the core interrupt code made the
     state tracking logic stricter.

     That caused the interrupt line to stay masked after switching from
     IO/APIC to PIC delivery mode, which obviously prevents interrupts
     from being delivered.

   - Make run_on_irqstack_code() typesafe. The function argument is a
     void pointer which is then cast to 'void (*fun)(void *).

     This breaks Control Flow Integrity checking in clang. Use proper
     helper functions for the three variants reuqired"

* tag 'x86-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/ioapic: Unbreak check_timer()
  x86/irq: Make run_on_irqstack_cond() typesafe

Pull timer updates from Thomas Gleixner:
 "A set of clocksource/clockevents updates:

   - Reset the TI/DM timer before enabling it instead of doing it the
     other way round.

   - Initialize the reload value for the GX6605s timer correctly so the
     hardware counter starts at 0 again after overrun.

   - Make error return value negative in the h8300 timer init function"

* tag 'timers-urgent-2020-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  clocksource/drivers/timer-gx6605s: Fixup counter reload
  clocksource/drivers/timer-ti-dm: Do reset before enable
  clocksource/drivers/h8300_timer8: Fix wrong return value in h8300_8timer_init()

Pinned pages shouldn't be write-protected when fork() happens, because
follow up copy-on-write on these pages could cause the pinned pages to
be replaced by random newly allocated pages.

For huge PMDs, we split the huge pmd if pinning is detected.  So that
future handling will be done by the PTE level (with our latest changes,
each of the small pages will be copied).  We can achieve this by let
copy_huge_pmd() return -EAGAIN for pinned pages, so that we'll
fallthrough in copy_pmd_range() and finally land the next
copy_pte_range() call.

Huge PUDs will be even more special - so far it does not support
anonymous pages.  But it can actually be done the same as the huge PMDs
even if the split huge PUDs means to erase the PUD entries.  It'll
guarantee the follow up fault ins will remap the same pages in either
parent/child later.

This might not be the most efficient way, but it should be easy and
clean enough.  It should be fine, since we're tackling with a very rare
case just to make sure userspaces that pinned some thps will still work
even without MADV_DONTFORK and after they fork()ed.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This allows copy_pte_range() to do early cow if the pages were pinned on
the source mm.

Currently we don't have an accurate way to know whether a page is pinned
or not.  The only thing we have is page_maybe_dma_pinned().  However
that's good enough for now.  Especially, with the newly added
mm->has_pinned flag to make sure we won't affect processes that never
pinned any pages.

It would be easier if we can do GFP_KERNEL allocation within
copy_one_pte().  Unluckily, we can't because we're with the page table
locks held for both the parent and child processes.  So the page
allocation needs to be done outside copy_one_pte().

Some trick is there in copy_present_pte(), majorly the wrprotect trick
to block concurrent fast-gup.  Comments in the function should explain
better in place.

Oleg Nesterov reported a (probably harmless) bug during review that we
didn't reset entry.val properly in copy_pte_range() so that potentially
there's chance to call add_swap_count_continuation() multiple times on
the same swp entry.  However that should be harmless since even if it
happens, the same function (add_swap_count_continuation()) will return
directly noticing that there're enough space for the swp counter.  So
instead of a standalone stable patch, it is touched up in this patch
directly.

Link: https://lore.kernel.org/lkml/20200914143829.GA1424636@nvidia.com/


Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This prepares for the future work to trigger early cow on pinned pages
during fork().

No functional change intended.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

(Commit message majorly collected from Jason Gunthorpe)

Reduce the chance of false positive from page_maybe_dma_pinned() by
keeping track if the mm_struct has ever been used with pin_user_pages().
This allows cases that might drive up the page ref_count to avoid any
penalty from handling dma_pinned pages.

Future work is planned, to provide a more sophisticated solution, likely
to turn it into a real counter.  For now, make it atomic_t but use it as
a boolean for simplicity.

Suggested-by: Jason Gunthorpe <jgg@ziepe.ca>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'timers-v5.9-rc4' of https://git.linaro.org/people/daniel.lezcano/linux into timers/urgent

Pull clocksource/clockevent fixes from Daniel Lezcano:

 - Fix wrong signed return value when checking of_iomap in the probe
   function for the h8300 timer (Tianjia Zhang)

 - Fix reset sequence when setting up the timer on the dm_timer (Tony
   Lindgren)

 - Fix counter reload when the interrupt fires on gx6605s (Guo Ren)

Pull SCSI fixes from James Bottomley:
 "Three fixes: one in drivers (lpfc) and two for zoned block devices.

  The latter also impinges on the block layer but only to introduce a
  new block API for setting the zone model rather than fiddling with the
  queue directly in the zoned block driver"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: sd_zbc: Fix ZBC disk initialization
  scsi: sd: sd_zbc: Fix handling of host-aware ZBC disks
  scsi: lpfc: Fix initial FLOGI failure due to BBSCN not supported

Pull io_uring fixes from Jens Axboe:
 "Two fixes for regressions in this cycle, and one that goes to 5.8
  stable:

   - fix leak of getname() retrieved filename

   - remove plug->nowait assignment, fixing a regression with btrfs

   - fix for async buffered retry"

* tag 'io_uring-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
  io_uring: ensure async buffered read-retry is setup properly
  io_uring: don't unconditionally set plug->nowait = true
  io_uring: ensure open/openat2 name is cleaned on cancelation

Pull block fixes from Jens Axboe:
 "NVMe pull request from Christoph, and removal of a dead define.

   - fix error during controller probe that cause double free irqs
     (Keith Busch)

   - FC connection establishment fix (James Smart)

   - properly handle completions for invalid tags (Xianting Tian)

   - pass the correct nsid to the command effects and supported log
     (Chaitanya Kulkarni)"

* tag 'block-5.9-2020-09-25' of git://git.kernel.dk/linux-block:
  block: remove unused BLK_QC_T_EAGAIN flag
  nvme-core: don't use NVME_NSID_ALL for command effects and supported log
  nvme-fc: fail new connections to a deleted host or remote port
  nvme-pci: fix NULL req in completion handler
  nvme: return errors for hwmon init