perf parse-events: Make legacy events lower priority than sysfs/JSON

The perf tool has previously made legacy events the priority so with
or without a PMU the legacy event would be opened:

  $ perf stat -e cpu-cycles,cpu/cpu-cycles/ true
  Using CPUID GenuineIntel-6-8D-1
  intel_pt default config: tsc,mtc,mtc_period=3,psb_period=3,pt,branch
  Attempting to add event pmu 'cpu' with 'cpu-cycles,' that may result in non-fatal errors
  After aliases, add event pmu 'cpu' with 'cpu-cycles,' that may result in non-fatal errors
  Control descriptor is not initialized
  ------------------------------------------------------------
  perf_event_attr:
    type                             0 (PERF_TYPE_HARDWARE)
    size                             136
    config                           0 (PERF_COUNT_HW_CPU_CYCLES)
    sample_type                      IDENTIFIER
    read_format                      TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
    disabled                         1
    inherit                          1
    enable_on_exec                   1
    exclude_guest                    1
  ------------------------------------------------------------
  sys_perf_event_open: pid 833967  cpu -1  group_fd -1  flags 0x8 = 3
  ------------------------------------------------------------
  perf_event_attr:
    type                             0 (PERF_TYPE_HARDWARE)
    size                             136
    config                           0 (PERF_COUNT_HW_CPU_CYCLES)
    sample_type                      IDENTIFIER
    read_format                      TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
    disabled                         1
    inherit                          1
    enable_on_exec                   1
    exclude_guest                    1
  ------------------------------------------------------------
  ...

Fixes to make hybrid/BIG.little PMUs behave correctly, ie as core PMUs
capable of opening legacy events on each, removing hard coded "cpu_core"
and "cpu_atom" Intel PMU names, etc. caused a behavioral difference on
Apple/ARM due to latent issues in the PMU driver reported in:
https://lore.kernel.org/lkml/08f1f185-e259-4014-9ca4-6411d5c1bc65@marcan.st/



As part of that report Mark Rutland <mark.rutland@arm.com> requested
that legacy events not be higher in priority when a PMU is specified
reversing what has until this change been perf's default behavior. With
this change the above becomes:

  $ perf stat -e cpu-cycles,cpu/cpu-cycles/ true
  Using CPUID GenuineIntel-6-8D-1
  Attempt to add: cpu/cpu-cycles=0/
  ..after resolving event: cpu/event=0x3c/
  Control descriptor is not initialized
  ------------------------------------------------------------
  perf_event_attr:
    type                             0 (PERF_TYPE_HARDWARE)
    size                             136
    config                           0 (PERF_COUNT_HW_CPU_CYCLES)
    sample_type                      IDENTIFIER
    read_format                      TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
    disabled                         1
    inherit                          1
    enable_on_exec                   1
    exclude_guest                    1
  ------------------------------------------------------------
  sys_perf_event_open: pid 827628  cpu -1  group_fd -1  flags 0x8 = 3
  ------------------------------------------------------------
  perf_event_attr:
    type                             4 (PERF_TYPE_RAW)
    size                             136
    config                           0x3c
    sample_type                      IDENTIFIER
    read_format                      TOTAL_TIME_ENABLED|TOTAL_TIME_RUNNING
    disabled                         1
    inherit                          1
    enable_on_exec                   1
    exclude_guest                    1
  ------------------------------------------------------------
  ...

So the second event has become a raw event as
/sys/devices/cpu/events/cpu-cycles exists.

A fix was necessary to config_term_pmu in parse-events.c as check_alias
expansion needs to happen after config_term_pmu, and config_term_pmu may
need calling a second time because of this.

config_term_pmu is updated to not use the legacy event when the PMU has
such a named event (either from JSON or sysfs).

The bulk of this change is updating all of the parse-events test
expectations so that if a sysfs/JSON event exists for a PMU the test
doesn't fail - a further sign, if it were needed, that the legacy event
priority was a known and tested behavior of the perf tool.

Reported-by: Hector Martin <marcan@marcan.st>
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Hector Martin <marcan@marcan.st>
Tested-by: Marc Zyngier <maz@kernel.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231123042922.834425-1-irogers@google.com


[ Initialize the 'alias_rewrote_terms' variable to false to address a clang warning ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>