net: macb: In ZynqMP resume always configure PS GTR for non-wakeup source

On Zynq UltraScale+ MPSoC ubuntu platform when systemctl issues suspend,
network manager bring down the interface and goes into suspend. When it
wakes up it again enables the interface.

This leads to xilinx-psgtr "PLL lock timeout" on interface bringup, as
the power management controller power down the entire FPD (including
SERDES) if none of the FPD devices are in use and serdes is not
initialized on resume.

$ sudo rtcwake -m no -s 120 -v
$ sudo systemctl suspend  <this does ifconfig eth1 down>
$ ifconfig eth1 up
xilinx-psgtr fd400000.phy: lane 0 (type 10, protocol 5): PLL lock timeout
phy phy-fd400000.phy.0: phy poweron failed --> -110

macb driver is called in this way:
1. macb_close: Stop network interface. In this function, it
   reset MACB IP and disables PHY and network interface.

2. macb_suspend: It is called in kernel suspend flow. But because
   network interface has been disabled(netif_running(ndev) is
   false), it does nothing and returns directly;

3. System goes into suspend state. Some time later, system is
   waken up by RTC wakeup device;

4. macb_resume: It does nothing because network interface has
   been disabled;

5. macb_open: It is called to enable network interface again. ethernet
   interface is initialized in this API but serdes which is power-off
   by PMUFW during FPD-off suspend is not initialized again and so
   we hit GT PLL lock issue on open.

To resolve this PLL timeout issue always do PS GTR initialization
when ethernet device is configured as non-wakeup source.

Fixes: f22bd29b ("net: macb: Fix ZynqMP SGMII non-wakeup source resume failure")
Fixes: 8b73fa3a

 ("net: macb: Added ZynqMP-specific initialization")
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/1691414091-2260697-1-git-send-email-radhey.shyam.pandey@amd.com


Signed-off-by: Jakub Kicinski <kuba@kernel.org>