diff --git a/.gitignore b/.gitignore index 57af07cf7e682e77de69d96587b0ca315ea611a1..0f2f40f71915fcdbf1a10b1e975131d137cdf2fa 100644 --- a/.gitignore +++ b/.gitignore @@ -14,6 +14,10 @@ *.o.* *.a *.s +*.ko.unsigned +*.ko.stripped +*.ko.stripped.dig +*.ko.stripped.sig *.ko *.so *.so.dbg @@ -84,3 +88,13 @@ GTAGS *.orig *~ \#*# + +# +# Leavings from module signing +# +extra_certificates +signing_key.priv +signing_key.x509 +signing_key.x509.keyid +signing_key.x509.signer +x509.genkey diff --git a/Documentation/00-INDEX b/Documentation/00-INDEX index 49c051380daf1973c1dbbf494b5ee58b11ff44a7..f54273e2ac979a386e27c0174e4a9524e60eae5e 100644 --- a/Documentation/00-INDEX +++ b/Documentation/00-INDEX @@ -270,8 +270,6 @@ preempt-locking.txt - info on locking under a preemptive kernel. printk-formats.txt - how to get printk format specifiers right -prio_tree.txt - - info on radix-priority-search-tree use for indexing vmas. ramoops.txt - documentation of the ramoops oops/panic logging module. rbtree.txt diff --git a/Documentation/ABI/obsolete/proc-pid-oom_adj b/Documentation/ABI/obsolete/proc-pid-oom_adj deleted file mode 100644 index 9a3cb88ade478742e7b60cb2787bd589e210589c..0000000000000000000000000000000000000000 --- a/Documentation/ABI/obsolete/proc-pid-oom_adj +++ /dev/null @@ -1,22 +0,0 @@ -What: /proc//oom_adj -When: August 2012 -Why: /proc//oom_adj allows userspace to influence the oom killer's - badness heuristic used to determine which task to kill when the kernel - is out of memory. - - The badness heuristic has since been rewritten since the introduction of - this tunable such that its meaning is deprecated. The value was - implemented as a bitshift on a score generated by the badness() - function that did not have any precise units of measure. With the - rewrite, the score is given as a proportion of available memory to the - task allocating pages, so using a bitshift which grows the score - exponentially is, thus, impossible to tune with fine granularity. - - A much more powerful interface, /proc//oom_score_adj, was - introduced with the oom killer rewrite that allows users to increase or - decrease the badness score linearly. This interface will replace - /proc//oom_adj. - - A warning will be emitted to the kernel log if an application uses this - deprecated interface. After it is printed once, future warnings will be - suppressed until the kernel is rebooted. diff --git a/Documentation/ABI/testing/ima_policy b/Documentation/ABI/testing/ima_policy index 6cd6daefaaedeb160a6f1ac1d616de7871b38965..986946613542b4bc1852aaf671e62059d3295cea 100644 --- a/Documentation/ABI/testing/ima_policy +++ b/Documentation/ABI/testing/ima_policy @@ -12,11 +12,14 @@ Description: then closing the file. The new policy takes effect after the file ima/policy is closed. + IMA appraisal, if configured, uses these file measurements + for local measurement appraisal. + rule format: action [condition ...] - action: measure | dont_measure + action: measure | dont_measure | appraise | dont_appraise | audit condition:= base | lsm - base: [[func=] [mask=] [fsmagic=] [uid=]] + base: [[func=] [mask=] [fsmagic=] [uid=] [fowner]] lsm: [[subj_user=] [subj_role=] [subj_type=] [obj_user=] [obj_role=] [obj_type=]] @@ -24,36 +27,50 @@ Description: mask:= [MAY_READ] [MAY_WRITE] [MAY_APPEND] [MAY_EXEC] fsmagic:= hex value uid:= decimal value + fowner:=decimal value lsm: are LSM specific default policy: # PROC_SUPER_MAGIC dont_measure fsmagic=0x9fa0 + dont_appraise fsmagic=0x9fa0 # SYSFS_MAGIC dont_measure fsmagic=0x62656572 + dont_appraise fsmagic=0x62656572 # DEBUGFS_MAGIC dont_measure fsmagic=0x64626720 + dont_appraise fsmagic=0x64626720 # TMPFS_MAGIC dont_measure fsmagic=0x01021994 + dont_appraise fsmagic=0x01021994 + # RAMFS_MAGIC + dont_measure fsmagic=0x858458f6 + dont_appraise fsmagic=0x858458f6 # SECURITYFS_MAGIC dont_measure fsmagic=0x73636673 + dont_appraise fsmagic=0x73636673 measure func=BPRM_CHECK measure func=FILE_MMAP mask=MAY_EXEC measure func=FILE_CHECK mask=MAY_READ uid=0 + appraise fowner=0 The default policy measures all executables in bprm_check, all files mmapped executable in file_mmap, and all files - open for read by root in do_filp_open. + open for read by root in do_filp_open. The default appraisal + policy appraises all files owned by root. Examples of LSM specific definitions: SELinux: # SELINUX_MAGIC - dont_measure fsmagic=0xF97CFF8C + dont_measure fsmagic=0xf97cff8c + dont_appraise fsmagic=0xf97cff8c dont_measure obj_type=var_log_t + dont_appraise obj_type=var_log_t dont_measure obj_type=auditd_log_t + dont_appraise obj_type=auditd_log_t measure subj_user=system_u func=FILE_CHECK mask=MAY_READ measure subj_role=system_r func=FILE_CHECK mask=MAY_READ diff --git a/Documentation/ABI/testing/sysfs-block b/Documentation/ABI/testing/sysfs-block index c1eb41cb9876083d3df79a6a995b692762acd21b..279da08f754192c07ba10c47eb0a4ea8e8c95892 100644 --- a/Documentation/ABI/testing/sysfs-block +++ b/Documentation/ABI/testing/sysfs-block @@ -206,3 +206,17 @@ Description: when a discarded area is read the discard_zeroes_data parameter will be set to one. Otherwise it will be 0 and the result of reading a discarded area is undefined. + +What: /sys/block//queue/write_same_max_bytes +Date: January 2012 +Contact: Martin K. Petersen +Description: + Some devices support a write same operation in which a + single data block can be written to a range of several + contiguous blocks on storage. This can be used to wipe + areas on disk or to initialize drives in a RAID + configuration. write_same_max_bytes indicates how many + bytes can be written in a single write same command. If + write_same_max_bytes is 0, write same is not supported + by the device. + diff --git a/Documentation/ABI/testing/sysfs-bus-fcoe b/Documentation/ABI/testing/sysfs-bus-fcoe index 469d09c02f6b7257e28160e63b56fba9ce50669a..50e2a80ea28ff496daf775dd9624934641dd2ea5 100644 --- a/Documentation/ABI/testing/sysfs-bus-fcoe +++ b/Documentation/ABI/testing/sysfs-bus-fcoe @@ -9,19 +9,19 @@ Attributes: this value will change the dev_loss_tmo for all FCFs discovered by this controller. - lesb_link_fail: Link Error Status Block (LESB) link failure count. + lesb/link_fail: Link Error Status Block (LESB) link failure count. - lesb_vlink_fail: Link Error Status Block (LESB) virtual link + lesb/vlink_fail: Link Error Status Block (LESB) virtual link failure count. - lesb_miss_fka: Link Error Status Block (LESB) missed FCoE + lesb/miss_fka: Link Error Status Block (LESB) missed FCoE Initialization Protocol (FIP) Keep-Alives (FKA). - lesb_symb_err: Link Error Status Block (LESB) symbolic error count. + lesb/symb_err: Link Error Status Block (LESB) symbolic error count. - lesb_err_block: Link Error Status Block (LESB) block error count. + lesb/err_block: Link Error Status Block (LESB) block error count. - lesb_fcs_error: Link Error Status Block (LESB) Fibre Channel + lesb/fcs_error: Link Error Status Block (LESB) Fibre Channel Serivces error count. Notes: ctlr_X (global increment starting at 0) diff --git a/Documentation/ABI/testing/sysfs-bus-rbd b/Documentation/ABI/testing/sysfs-bus-rbd index 3c17b62899f688c5955a3f065e966c9fc72231f7..1cf2adf46b118cd4b2f7bc2449a1065d764a2bd6 100644 --- a/Documentation/ABI/testing/sysfs-bus-rbd +++ b/Documentation/ABI/testing/sysfs-bus-rbd @@ -25,6 +25,10 @@ client_id The ceph unique client id that was assigned for this specific session. +features + + A hexadecimal encoding of the feature bits for this image. + major The block device major number. @@ -33,6 +37,11 @@ name The name of the rbd image. +image_id + + The unique id for the rbd image. (For rbd image format 1 + this is empty.) + pool The name of the storage pool where this rbd image resides. @@ -57,12 +66,6 @@ current_snap The current snapshot for which the device is mapped. -create_snap - - Create a snapshot: - - $ echo > /sys/bus/rbd/devices//snap_create - snap_* A directory per each snapshot @@ -79,4 +82,7 @@ snap_size The size of the image when this snapshot was taken. +snap_features + + A hexadecimal encoding of the feature bits for this snapshot. diff --git a/Documentation/ABI/testing/sysfs-devices-firmware_node b/Documentation/ABI/testing/sysfs-devices-firmware_node new file mode 100644 index 0000000000000000000000000000000000000000..46badc9ea284b80ad5584f932cea8028a132ef9b --- /dev/null +++ b/Documentation/ABI/testing/sysfs-devices-firmware_node @@ -0,0 +1,17 @@ +What: /sys/devices/.../firmware_node/ +Date: September 2012 +Contact: <> +Description: + The /sys/devices/.../firmware_node directory contains attributes + allowing the user space to check and modify some firmware + related properties of given device. + +What: /sys/devices/.../firmware_node/description +Date: September 2012 +Contact: Lance Ortiz +Description: + The /sys/devices/.../firmware/description attribute contains a string + that describes the device as provided by the _STR method in the ACPI + namespace. This attribute is read-only. If the device does not have + an _STR method associated with it in the ACPI namespace, this + attribute is not present. diff --git a/Documentation/ABI/testing/sysfs-devices-system-cpu b/Documentation/ABI/testing/sysfs-devices-system-cpu index 5dab36448b44b84bf869b9316d50af47f00328b6..6943133afcb8388916a87e2bd66923fe26a97906 100644 --- a/Documentation/ABI/testing/sysfs-devices-system-cpu +++ b/Documentation/ABI/testing/sysfs-devices-system-cpu @@ -176,3 +176,14 @@ Description: Disable L3 cache indices All AMD processors with L3 caches provide this functionality. For details, see BKDGs at http://developer.amd.com/documentation/guides/Pages/default.aspx + + +What: /sys/devices/system/cpu/cpufreq/boost +Date: August 2012 +Contact: Linux kernel mailing list +Description: Processor frequency boosting control + + This switch controls the boost setting for the whole system. + Boosting allows the CPU and the firmware to run at a frequency + beyound it's nominal limit. + More details can be found in Documentation/cpu-freq/boost.txt diff --git a/Documentation/ABI/testing/sysfs-driver-ppi b/Documentation/ABI/testing/sysfs-driver-ppi new file mode 100644 index 0000000000000000000000000000000000000000..97a003ee058bc79e444bf8e442fa87d93b8f8af3 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-driver-ppi @@ -0,0 +1,70 @@ +What: /sys/devices/pnp0//ppi/ +Date: August 2012 +Kernel Version: 3.6 +Contact: xiaoyan.zhang@intel.com +Description: + This folder includes the attributes related with PPI (Physical + Presence Interface). Only if TPM is supported by BIOS, this + folder makes sence. The folder path can be got by command + 'find /sys/ -name 'pcrs''. For the detail information of PPI, + please refer to the PPI specification from + http://www.trustedcomputinggroup.org/ + +What: /sys/devices/pnp0//ppi/version +Date: August 2012 +Contact: xiaoyan.zhang@intel.com +Description: + This attribute shows the version of the PPI supported by the + platform. + This file is readonly. + +What: /sys/devices/pnp0//ppi/request +Date: August 2012 +Contact: xiaoyan.zhang@intel.com +Description: + This attribute shows the request for an operation to be + executed in the pre-OS environment. It is the only input from + the OS to the pre-OS environment. The request should be an + integer value range from 1 to 160, and 0 means no request. + This file can be read and written. + +What: /sys/devices/pnp0/00:/ppi/response +Date: August 2012 +Contact: xiaoyan.zhang@intel.com +Description: + This attribute shows the response to the most recent operation + request it acted upon. The format is " + : ". + This file is readonly. + +What: /sys/devices/pnp0//ppi/transition_action +Date: August 2012 +Contact: xiaoyan.zhang@intel.com +Description: + This attribute shows the platform-specific action that should + take place in order to transition to the BIOS for execution of + a requested operation. The format is ": ". + This file is readonly. + +What: /sys/devices/pnp0//ppi/tcg_operations +Date: August 2012 +Contact: xiaoyan.zhang@intel.com +Description: + This attribute shows whether it is allowed to request an + operation to be executed in the pre-OS environment by the BIOS + for the requests defined by TCG, i.e. requests from 1 to 22. + The format is " : ". + This attribute is only supported by PPI version 1.2+. + This file is readonly. + +What: /sys/devices/pnp0//ppi/vs_operations +Date: August 2012 +Contact: xiaoyan.zhang@intel.com +Description: + This attribute shows whether it is allowed to request an + operation to be executed in the pre-OS environment by the BIOS + for the verdor specific requests, i.e. requests from 128 to + 255. The format is same with tcg_operations. This attribute + is also only supported by PPI version 1.2+. + This file is readonly. diff --git a/Documentation/ABI/testing/sysfs-fs-ext4 b/Documentation/ABI/testing/sysfs-fs-ext4 index f22ac0872ae8de41a44406edfab71384d54b830a..c631253cf85c763de6cfd347a15ce063fd71be07 100644 --- a/Documentation/ABI/testing/sysfs-fs-ext4 +++ b/Documentation/ABI/testing/sysfs-fs-ext4 @@ -96,3 +96,16 @@ Contact: "Theodore Ts'o" Description: The maximum number of megabytes the writeback code will try to write out before move on to another inode. + +What: /sys/fs/ext4//extent_max_zeroout_kb +Date: August 2012 +Contact: "Theodore Ts'o" +Description: + The maximum number of kilobytes which will be zeroed + out in preference to creating a new uninitialized + extent when manipulating an inode's extent tree. Note + that using a larger value will increase the + variability of time necessary to complete a random + write operation (since a 4k random write might turn + into a much larger write due to the zeroout + operation). diff --git a/Documentation/CodingStyle b/Documentation/CodingStyle index cb9258b8fd35b25b8ac750b18b4237204213fbd4..495e5ba1634cac59350326485b07b7e902242ab3 100644 --- a/Documentation/CodingStyle +++ b/Documentation/CodingStyle @@ -454,6 +454,16 @@ The preferred style for long (multi-line) comments is: * with beginning and ending almost-blank lines. */ +For files in net/ and drivers/net/ the preferred style for long (multi-line) +comments is a little different. + + /* The preferred comment style for files in net/ and drivers/net + * looks like this. + * + * It is nearly the same as the generally preferred comment style, + * but there is no initial almost-blank line. + */ + It's also important to comment data, whether they are basic types or derived types. To this end, use just one data declaration per line (no commas for multiple data declarations). This leaves you room for a small comment on each diff --git a/Documentation/DocBook/drm.tmpl b/Documentation/DocBook/drm.tmpl index 196b8b9dba1112b245e331a76b62e804604b191a..b0300529ab13ede1178cf51097a02da67cfcc315 100644 --- a/Documentation/DocBook/drm.tmpl +++ b/Documentation/DocBook/drm.tmpl @@ -6,11 +6,36 @@ Linux DRM Developer's Guide + + + Jesse + Barnes + Initial version + + Intel Corporation +
+ jesse.barnes@intel.com +
+ + + + Laurent + Pinchart + Driver internals + + Ideas on board SPRL +
+ laurent.pinchart@ideasonboard.com +
+ + + + 2008-2009 - - Intel Corporation (Jesse Barnes <jesse.barnes@intel.com>) - + 2012 + Intel Corporation + Laurent Pinchart @@ -20,6 +45,17 @@ the kernel source COPYING file. + + + + + 1.0 + 2012-07-13 + LP + Added extensive documentation about driver internals. + + + @@ -72,342 +108,361 @@ submission & fencing, suspend/resume support, and DMA services. - - The core of every DRM driver is struct drm_driver. Drivers - typically statically initialize a drm_driver structure, - then pass it to drm_init() at load time. - - Driver initialization - - Before calling the DRM initialization routines, the driver must - first create and fill out a struct drm_driver structure. - - - static struct drm_driver driver = { - /* Don't use MTRRs here; the Xserver or userspace app should - * deal with them for Intel hardware. - */ - .driver_features = - DRIVER_USE_AGP | DRIVER_REQUIRE_AGP | - DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_MODESET, - .load = i915_driver_load, - .unload = i915_driver_unload, - .firstopen = i915_driver_firstopen, - .lastclose = i915_driver_lastclose, - .preclose = i915_driver_preclose, - .save = i915_save, - .restore = i915_restore, - .device_is_agp = i915_driver_device_is_agp, - .get_vblank_counter = i915_get_vblank_counter, - .enable_vblank = i915_enable_vblank, - .disable_vblank = i915_disable_vblank, - .irq_preinstall = i915_driver_irq_preinstall, - .irq_postinstall = i915_driver_irq_postinstall, - .irq_uninstall = i915_driver_irq_uninstall, - .irq_handler = i915_driver_irq_handler, - .reclaim_buffers = drm_core_reclaim_buffers, - .get_map_ofs = drm_core_get_map_ofs, - .get_reg_ofs = drm_core_get_reg_ofs, - .fb_probe = intelfb_probe, - .fb_remove = intelfb_remove, - .fb_resize = intelfb_resize, - .master_create = i915_master_create, - .master_destroy = i915_master_destroy, -#if defined(CONFIG_DEBUG_FS) - .debugfs_init = i915_debugfs_init, - .debugfs_cleanup = i915_debugfs_cleanup, -#endif - .gem_init_object = i915_gem_init_object, - .gem_free_object = i915_gem_free_object, - .gem_vm_ops = &i915_gem_vm_ops, - .ioctls = i915_ioctls, - .fops = { - .owner = THIS_MODULE, - .open = drm_open, - .release = drm_release, - .ioctl = drm_ioctl, - .mmap = drm_mmap, - .poll = drm_poll, - .fasync = drm_fasync, -#ifdef CONFIG_COMPAT - .compat_ioctl = i915_compat_ioctl, -#endif - .llseek = noop_llseek, - }, - .pci_driver = { - .name = DRIVER_NAME, - .id_table = pciidlist, - .probe = probe, - .remove = __devexit_p(drm_cleanup_pci), - }, - .name = DRIVER_NAME, - .desc = DRIVER_DESC, - .date = DRIVER_DATE, - .major = DRIVER_MAJOR, - .minor = DRIVER_MINOR, - .patchlevel = DRIVER_PATCHLEVEL, - }; - - - In the example above, taken from the i915 DRM driver, the driver - sets several flags indicating what core features it supports; - we go over the individual callbacks in later sections. Since - flags indicate which features your driver supports to the DRM - core, you need to set most of them prior to calling drm_init(). Some, - like DRIVER_MODESET can be set later based on user supplied parameters, - but that's the exception rather than the rule. - - - Driver flags - - DRIVER_USE_AGP - - Driver uses AGP interface - - - - DRIVER_REQUIRE_AGP - - Driver needs AGP interface to function. - - - - DRIVER_USE_MTRR - - - Driver uses MTRR interface for mapping memory. Deprecated. - - - - - DRIVER_PCI_DMA - - Driver is capable of PCI DMA. Deprecated. - - - - DRIVER_SG - - Driver can perform scatter/gather DMA. Deprecated. - - - - DRIVER_HAVE_DMA - Driver supports DMA. Deprecated. - - - DRIVER_HAVE_IRQDRIVER_IRQ_SHARED - - - DRIVER_HAVE_IRQ indicates whether the driver has an IRQ - handler. DRIVER_IRQ_SHARED indicates whether the device & - handler support shared IRQs (note that this is required of - PCI drivers). - - - - - DRIVER_DMA_QUEUE - - - Should be set if the driver queues DMA requests and completes them - asynchronously. Deprecated. - - - - - DRIVER_FB_DMA - - - Driver supports DMA to/from the framebuffer. Deprecated. - - - - - DRIVER_MODESET - - - Driver supports mode setting interfaces. - - - - - - In this specific case, the driver requires AGP and supports - IRQs. DMA, as discussed later, is handled by device-specific ioctls - in this case. It also supports the kernel mode setting APIs, though - unlike in the actual i915 driver source, this example unconditionally - exports KMS capability. + Driver Initialization + + At the core of every DRM driver is a drm_driver + structure. Drivers typically statically initialize a drm_driver structure, + and then pass it to one of the drm_*_init() functions + to register it with the DRM subsystem. - - - - - - Driver load - - In the previous section, we saw what a typical drm_driver - structure might look like. One of the more important fields in - the structure is the hook for the load function. - - - static struct drm_driver driver = { - ... - .load = i915_driver_load, - ... - }; - - - The load function has many responsibilities: allocating a driver - private structure, specifying supported performance counters, - configuring the device (e.g. mapping registers & command - buffers), initializing the memory manager, and setting up the - initial output configuration. - - - If compatibility is a concern (e.g. with drivers converted over - to the new interfaces from the old ones), care must be taken to - prevent device initialization and control that is incompatible with - currently active userspace drivers. For instance, if user - level mode setting drivers are in use, it would be problematic - to perform output discovery & configuration at load time. - Likewise, if user-level drivers unaware of memory management are - in use, memory management and command buffer setup may need to - be omitted. These requirements are driver-specific, and care - needs to be taken to keep both old and new applications and - libraries working. The i915 driver supports the "modeset" - module parameter to control whether advanced features are - enabled at load time or in legacy fashion. + + The drm_driver structure contains static + information that describes the driver and features it supports, and + pointers to methods that the DRM core will call to implement the DRM API. + We will first go through the drm_driver static + information fields, and will then describe individual operations in + details as they get used in later sections. - - Driver private & performance counters - - The driver private hangs off the main drm_device structure and - can be used for tracking various device-specific bits of - information, like register offsets, command buffer status, - register state for suspend/resume, etc. At load time, a - driver may simply allocate one and set drm_device.dev_priv - appropriately; it should be freed and drm_device.dev_priv set - to NULL when the driver is unloaded. - + Driver Information + + Driver Features + + Drivers inform the DRM core about their requirements and supported + features by setting appropriate flags in the + driver_features field. Since those flags + influence the DRM core behaviour since registration time, most of them + must be set to registering the drm_driver + instance. + + u32 driver_features; + + Driver Feature Flags + + DRIVER_USE_AGP + + Driver uses AGP interface, the DRM core will manage AGP resources. + + + + DRIVER_REQUIRE_AGP + + Driver needs AGP interface to function. AGP initialization failure + will become a fatal error. + + + + DRIVER_USE_MTRR + + Driver uses MTRR interface for mapping memory, the DRM core will + manage MTRR resources. Deprecated. + + + + DRIVER_PCI_DMA + + Driver is capable of PCI DMA, mapping of PCI DMA buffers to + userspace will be enabled. Deprecated. + + + + DRIVER_SG + + Driver can perform scatter/gather DMA, allocation and mapping of + scatter/gather buffers will be enabled. Deprecated. + + + + DRIVER_HAVE_DMA + + Driver supports DMA, the userspace DMA API will be supported. + Deprecated. + + + + DRIVER_HAVE_IRQDRIVER_IRQ_SHARED + + DRIVER_HAVE_IRQ indicates whether the driver has an IRQ handler. The + DRM core will automatically register an interrupt handler when the + flag is set. DRIVER_IRQ_SHARED indicates whether the device & + handler support shared IRQs (note that this is required of PCI + drivers). + + + + DRIVER_IRQ_VBL + Unused. Deprecated. + + + DRIVER_DMA_QUEUE + + Should be set if the driver queues DMA requests and completes them + asynchronously. Deprecated. + + + + DRIVER_FB_DMA + + Driver supports DMA to/from the framebuffer, mapping of frambuffer + DMA buffers to userspace will be supported. Deprecated. + + + + DRIVER_IRQ_VBL2 + Unused. Deprecated. + + + DRIVER_GEM + + Driver use the GEM memory manager. + + + + DRIVER_MODESET + + Driver supports mode setting interfaces (KMS). + + + + DRIVER_PRIME + + Driver implements DRM PRIME buffer sharing. + + + + + + Major, Minor and Patchlevel + int major; +int minor; +int patchlevel; + + The DRM core identifies driver versions by a major, minor and patch + level triplet. The information is printed to the kernel log at + initialization time and passed to userspace through the + DRM_IOCTL_VERSION ioctl. + + + The major and minor numbers are also used to verify the requested driver + API version passed to DRM_IOCTL_SET_VERSION. When the driver API changes + between minor versions, applications can call DRM_IOCTL_SET_VERSION to + select a specific version of the API. If the requested major isn't equal + to the driver major, or the requested minor is larger than the driver + minor, the DRM_IOCTL_SET_VERSION call will return an error. Otherwise + the driver's set_version() method will be called with the requested + version. + + + + Name, Description and Date + char *name; +char *desc; +char *date; + + The driver name is printed to the kernel log at initialization time, + used for IRQ registration and passed to userspace through + DRM_IOCTL_VERSION. + + + The driver description is a purely informative string passed to + userspace through the DRM_IOCTL_VERSION ioctl and otherwise unused by + the kernel. + + + The driver date, formatted as YYYYMMDD, is meant to identify the date of + the latest modification to the driver. However, as most drivers fail to + update it, its value is mostly useless. The DRM core prints it to the + kernel log at initialization time and passes it to userspace through the + DRM_IOCTL_VERSION ioctl. + + + + + Driver Load - The DRM supports several counters which may be used for rough - performance characterization. Note that the DRM stat counter - system is not often used by applications, and supporting - additional counters is completely optional. + The load method is the driver and device + initialization entry point. The method is responsible for allocating and + initializing driver private data, specifying supported performance + counters, performing resource allocation and mapping (e.g. acquiring + clocks, mapping registers or allocating command buffers), initializing + the memory manager (), installing + the IRQ handler (), setting up + vertical blanking handling (), mode + setting () and initial output + configuration (). + + If compatibility is a concern (e.g. with drivers converted over from + User Mode Setting to Kernel Mode Setting), care must be taken to prevent + device initialization and control that is incompatible with currently + active userspace drivers. For instance, if user level mode setting + drivers are in use, it would be problematic to perform output discovery + & configuration at load time. Likewise, if user-level drivers + unaware of memory management are in use, memory management and command + buffer setup may need to be omitted. These requirements are + driver-specific, and care needs to be taken to keep both old and new + applications and libraries working. + + int (*load) (struct drm_device *, unsigned long flags); - These interfaces are deprecated and should not be used. If performance - monitoring is desired, the developer should investigate and - potentially enhance the kernel perf and tracing infrastructure to export - GPU related performance information for consumption by performance - monitoring tools and applications. + The method takes two arguments, a pointer to the newly created + drm_device and flags. The flags are used to + pass the driver_data field of the device id + corresponding to the device passed to drm_*_init(). + Only PCI devices currently use this, USB and platform DRM drivers have + their load method called with flags to 0. + + Driver Private & Performance Counters + + The driver private hangs off the main + drm_device structure and can be used for + tracking various device-specific bits of information, like register + offsets, command buffer status, register state for suspend/resume, etc. + At load time, a driver may simply allocate one and set + drm_device.dev_priv + appropriately; it should be freed and + drm_device.dev_priv + set to NULL when the driver is unloaded. + + + DRM supports several counters which were used for rough performance + characterization. This stat counter system is deprecated and should not + be used. If performance monitoring is desired, the developer should + investigate and potentially enhance the kernel perf and tracing + infrastructure to export GPU related performance information for + consumption by performance monitoring tools and applications. + + + + IRQ Registration + + The DRM core tries to facilitate IRQ handler registration and + unregistration by providing drm_irq_install and + drm_irq_uninstall functions. Those functions only + support a single interrupt per device. + + + + Both functions get the device IRQ by calling + drm_dev_to_irq. This inline function will call a + bus-specific operation to retrieve the IRQ number. For platform devices, + platform_get_irq(..., 0) is used to retrieve the + IRQ number. + + + drm_irq_install starts by calling the + irq_preinstall driver operation. The operation + is optional and must make sure that the interrupt will not get fired by + clearing all pending interrupt flags or disabling the interrupt. + + + The IRQ will then be requested by a call to + request_irq. If the DRIVER_IRQ_SHARED driver + feature flag is set, a shared (IRQF_SHARED) IRQ handler will be + requested. + + + The IRQ handler function must be provided as the mandatory irq_handler + driver operation. It will get passed directly to + request_irq and thus has the same prototype as all + IRQ handlers. It will get called with a pointer to the DRM device as the + second argument. + + + Finally the function calls the optional + irq_postinstall driver operation. The operation + usually enables interrupts (excluding the vblank interrupt, which is + enabled separately), but drivers may choose to enable/disable interrupts + at a different time. + + + drm_irq_uninstall is similarly used to uninstall an + IRQ handler. It starts by waking up all processes waiting on a vblank + interrupt to make sure they don't hang, and then calls the optional + irq_uninstall driver operation. The operation + must disable all hardware interrupts. Finally the function frees the IRQ + by calling free_irq. + + + + Memory Manager Initialization + + Every DRM driver requires a memory manager which must be initialized at + load time. DRM currently contains two memory managers, the Translation + Table Manager (TTM) and the Graphics Execution Manager (GEM). + This document describes the use of the GEM memory manager only. See + for details. + + + + Miscellaneous Device Configuration + + Another task that may be necessary for PCI devices during configuration + is mapping the video BIOS. On many devices, the VBIOS describes device + configuration, LCD panel timings (if any), and contains flags indicating + device state. Mapping the BIOS can be done using the pci_map_rom() call, + a convenience function that takes care of mapping the actual ROM, + whether it has been shadowed into memory (typically at address 0xc0000) + or exists on the PCI device in the ROM BAR. Note that after the ROM has + been mapped and any necessary information has been extracted, it should + be unmapped; on many devices, the ROM address decoder is shared with + other BARs, so leaving it mapped could cause undesired behaviour like + hangs or memory corruption. + + + + - - Configuring the device - - Obviously, device configuration is device-specific. - However, there are several common operations: finding a - device's PCI resources, mapping them, and potentially setting - up an IRQ handler. - - - Finding & mapping resources is fairly straightforward. The - DRM wrapper functions, drm_get_resource_start() and - drm_get_resource_len(), may be used to find BARs on the given - drm_device struct. Once those values have been retrieved, the - driver load function can call drm_addmap() to create a new - mapping for the BAR in question. Note that you probably want a - drm_local_map_t in your driver private structure to track any - mappings you create. - - - - - if compatibility with other operating systems isn't a concern - (DRM drivers can run under various BSD variants and OpenSolaris), - native Linux calls may be used for the above, e.g. pci_resource_* - and iomap*/iounmap. See the Linux device driver book for more - info. - - - Once you have a register map, you may use the DRM_READn() and - DRM_WRITEn() macros to access the registers on your device, or - use driver-specific versions to offset into your MMIO space - relative to a driver-specific base pointer (see I915_READ for - an example). - - - If your device supports interrupt generation, you may want to - set up an interrupt handler when the driver is loaded. This - is done using the drm_irq_install() function. If your device - supports vertical blank interrupts, it should call - drm_vblank_init() to initialize the core vblank handling code before - enabling interrupts on your device. This ensures the vblank related - structures are allocated and allows the core to handle vblank events. - - - - Once your interrupt handler is registered (it uses your - drm_driver.irq_handler as the actual interrupt handling - function), you can safely enable interrupts on your device, - assuming any other state your interrupt handler uses is also - initialized. - - - Another task that may be necessary during configuration is - mapping the video BIOS. On many devices, the VBIOS describes - device configuration, LCD panel timings (if any), and contains - flags indicating device state. Mapping the BIOS can be done - using the pci_map_rom() call, a convenience function that - takes care of mapping the actual ROM, whether it has been - shadowed into memory (typically at address 0xc0000) or exists - on the PCI device in the ROM BAR. Note that after the ROM - has been mapped and any necessary information has been extracted, - it should be unmapped; on many devices, the ROM address decoder is - shared with other BARs, so leaving it mapped could cause - undesired behavior like hangs or memory corruption. - - - + + + Memory management + + Modern Linux systems require large amount of graphics memory to store + frame buffers, textures, vertices and other graphics-related data. Given + the very dynamic nature of many of that data, managing graphics memory + efficiently is thus crucial for the graphics stack and plays a central + role in the DRM infrastructure. + + + The DRM core includes two memory managers, namely Translation Table Maps + (TTM) and Graphics Execution Manager (GEM). TTM was the first DRM memory + manager to be developed and tried to be a one-size-fits-them all + solution. It provides a single userspace API to accomodate the need of + all hardware, supporting both Unified Memory Architecture (UMA) devices + and devices with dedicated video RAM (i.e. most discrete video cards). + This resulted in a large, complex piece of code that turned out to be + hard to use for driver development. + + + GEM started as an Intel-sponsored project in reaction to TTM's + complexity. Its design philosophy is completely different: instead of + providing a solution to every graphics memory-related problems, GEM + identified common code between drivers and created a support library to + share it. GEM has simpler initialization and execution requirements than + TTM, but has no video RAM management capabitilies and is thus limited to + UMA devices. + - Memory manager initialization - - In order to allocate command buffers, cursor memory, scanout - buffers, etc., as well as support the latest features provided - by packages like Mesa and the X.Org X server, your driver - should support a memory manager. - + The Translation Table Manager (TTM) - If your driver supports memory management (it should!), you - need to set that up at load time as well. How you initialize - it depends on which memory manager you're using: TTM or GEM. + TTM design background and information belongs here. TTM initialization - - TTM (for Translation Table Manager) manages video memory and - aperture space for graphics devices. TTM supports both UMA devices - and devices with dedicated video RAM (VRAM), i.e. most discrete - graphics devices. If your device has dedicated RAM, supporting - TTM is desirable. TTM also integrates tightly with your - driver-specific buffer execution function. See the radeon - driver for examples. - - - The core TTM structure is the ttm_bo_driver struct. It contains - several fields with function pointers for initializing the TTM, - allocating and freeing memory, waiting for command completion - and fence synchronization, and memory migration. See the - radeon_ttm.c file for an example of usage. + This section is outdated. + + Drivers wishing to support TTM must fill out a drm_bo_driver + structure. The structure contains several fields with function + pointers for initializing the TTM, allocating and freeing memory, + waiting for command completion and fence synchronization, and memory + migration. See the radeon_ttm.c file for an example of usage. The ttm_global_reference structure is made up of several fields: @@ -445,82 +500,1081 @@ count for the TTM, which will call your initialization function. + + + The Graphics Execution Manager (GEM) + + The GEM design approach has resulted in a memory manager that doesn't + provide full coverage of all (or even all common) use cases in its + userspace or kernel API. GEM exposes a set of standard memory-related + operations to userspace and a set of helper functions to drivers, and let + drivers implement hardware-specific operations with their own private API. + + + The GEM userspace API is described in the + GEM - the Graphics + Execution Manager article on LWN. While slightly + outdated, the document provides a good overview of the GEM API principles. + Buffer allocation and read and write operations, described as part of the + common GEM API, are currently implemented using driver-specific ioctls. + + + GEM is data-agnostic. It manages abstract buffer objects without knowing + what individual buffers contain. APIs that require knowledge of buffer + contents or purpose, such as buffer allocation or synchronization + primitives, are thus outside of the scope of GEM and must be implemented + using driver-specific ioctls. + + + On a fundamental level, GEM involves several operations: + + Memory allocation and freeing + Command execution + Aperture management at command execution time + + Buffer object allocation is relatively straightforward and largely + provided by Linux's shmem layer, which provides memory to back each + object. + + + Device-specific operations, such as command execution, pinning, buffer + read & write, mapping, and domain ownership transfers are left to + driver-specific ioctls. + + + GEM Initialization + + Drivers that use GEM must set the DRIVER_GEM bit in the struct + drm_driver + driver_features field. The DRM core will + then automatically initialize the GEM core before calling the + load operation. Behind the scene, this will + create a DRM Memory Manager object which provides an address space + pool for object allocation. + + + In a KMS configuration, drivers need to allocate and initialize a + command ring buffer following core GEM initialization if required by + the hardware. UMA devices usually have what is called a "stolen" + memory region, which provides space for the initial framebuffer and + large, contiguous memory regions required by the device. This space is + typically not managed by GEM, and must be initialized separately into + its own DRM MM object. + + - GEM initialization - - GEM is an alternative to TTM, designed specifically for UMA - devices. It has simpler initialization and execution requirements - than TTM, but has no VRAM management capability. Core GEM - is initialized by calling drm_mm_init() to create - a GTT DRM MM object, which provides an address space pool for - object allocation. In a KMS configuration, the driver - needs to allocate and initialize a command ring buffer following - core GEM initialization. A UMA device usually has what is called a - "stolen" memory region, which provides space for the initial - framebuffer and large, contiguous memory regions required by the - device. This space is not typically managed by GEM, and it must - be initialized separately into its own DRM MM object. - - - Initialization is driver-specific. In the case of Intel - integrated graphics chips like 965GM, GEM initialization can - be done by calling the internal GEM init function, - i915_gem_do_init(). Since the 965GM is a UMA device - (i.e. it doesn't have dedicated VRAM), GEM manages - making regular RAM available for GPU operations. Memory set - aside by the BIOS (called "stolen" memory by the i915 - driver) is managed by the DRM memrange allocator; the - rest of the aperture is managed by GEM. - - /* Basic memrange allocator for stolen space (aka vram) */ - drm_memrange_init(&dev_priv->vram, 0, prealloc_size); - /* Let GEM Manage from end of prealloc space to end of aperture */ - i915_gem_do_init(dev, prealloc_size, agp_size); - - - - - Once the memory manager has been set up, we may allocate the - command buffer. In the i915 case, this is also done with a - GEM function, i915_gem_init_ringbuffer(). - + GEM Objects Creation + + GEM splits creation of GEM objects and allocation of the memory that + backs them in two distinct operations. + + + GEM objects are represented by an instance of struct + drm_gem_object. Drivers usually need to extend + GEM objects with private information and thus create a driver-specific + GEM object structure type that embeds an instance of struct + drm_gem_object. + + + To create a GEM object, a driver allocates memory for an instance of its + specific GEM object type and initializes the embedded struct + drm_gem_object with a call to + drm_gem_object_init. The function takes a pointer to + the DRM device, a pointer to the GEM object and the buffer object size + in bytes. + + + GEM uses shmem to allocate anonymous pageable memory. + drm_gem_object_init will create an shmfs file of + the requested size and store it into the struct + drm_gem_object filp + field. The memory is used as either main storage for the object when the + graphics hardware uses system memory directly or as a backing store + otherwise. + + + Drivers are responsible for the actual physical pages allocation by + calling shmem_read_mapping_page_gfp for each page. + Note that they can decide to allocate pages when initializing the GEM + object, or to delay allocation until the memory is needed (for instance + when a page fault occurs as a result of a userspace memory access or + when the driver needs to start a DMA transfer involving the memory). + + + Anonymous pageable memory allocation is not always desired, for instance + when the hardware requires physically contiguous system memory as is + often the case in embedded devices. Drivers can create GEM objects with + no shmfs backing (called private GEM objects) by initializing them with + a call to drm_gem_private_object_init instead of + drm_gem_object_init. Storage for private GEM + objects must be managed by drivers. + + + Drivers that do not need to extend GEM objects with private information + can call the drm_gem_object_alloc function to + allocate and initialize a struct drm_gem_object + instance. The GEM core will call the optional driver + gem_init_object operation after initializing + the GEM object with drm_gem_object_init. + int (*gem_init_object) (struct drm_gem_object *obj); + + + No alloc-and-init function exists for private GEM objects. + + + + GEM Objects Lifetime + + All GEM objects are reference-counted by the GEM core. References can be + acquired and release by calling drm_gem_object_reference + and drm_gem_object_unreference respectively. The + caller must hold the drm_device + struct_mutex lock. As a convenience, GEM + provides the drm_gem_object_reference_unlocked and + drm_gem_object_unreference_unlocked functions that + can be called without holding the lock. + + + When the last reference to a GEM object is released the GEM core calls + the drm_driver + gem_free_object operation. That operation is + mandatory for GEM-enabled drivers and must free the GEM object and all + associated resources. + + + void (*gem_free_object) (struct drm_gem_object *obj); + Drivers are responsible for freeing all GEM object resources, including + the resources created by the GEM core. If an mmap offset has been + created for the object (in which case + drm_gem_object::map_list::map + is not NULL) it must be freed by a call to + drm_gem_free_mmap_offset. The shmfs backing store + must be released by calling drm_gem_object_release + (that function can safely be called if no shmfs backing store has been + created). + + + + GEM Objects Naming + + Communication between userspace and the kernel refers to GEM objects + using local handles, global names or, more recently, file descriptors. + All of those are 32-bit integer values; the usual Linux kernel limits + apply to the file descriptors. + + + GEM handles are local to a DRM file. Applications get a handle to a GEM + object through a driver-specific ioctl, and can use that handle to refer + to the GEM object in other standard or driver-specific ioctls. Closing a + DRM file handle frees all its GEM handles and dereferences the + associated GEM objects. + + + To create a handle for a GEM object drivers call + drm_gem_handle_create. The function takes a pointer + to the DRM file and the GEM object and returns a locally unique handle. + When the handle is no longer needed drivers delete it with a call to + drm_gem_handle_delete. Finally the GEM object + associated with a handle can be retrieved by a call to + drm_gem_object_lookup. + + + Handles don't take ownership of GEM objects, they only take a reference + to the object that will be dropped when the handle is destroyed. To + avoid leaking GEM objects, drivers must make sure they drop the + reference(s) they own (such as the initial reference taken at object + creation time) as appropriate, without any special consideration for the + handle. For example, in the particular case of combined GEM object and + handle creation in the implementation of the + dumb_create operation, drivers must drop the + initial reference to the GEM object before returning the handle. + + + GEM names are similar in purpose to handles but are not local to DRM + files. They can be passed between processes to reference a GEM object + globally. Names can't be used directly to refer to objects in the DRM + API, applications must convert handles to names and names to handles + using the DRM_IOCTL_GEM_FLINK and DRM_IOCTL_GEM_OPEN ioctls + respectively. The conversion is handled by the DRM core without any + driver-specific support. + + + Similar to global names, GEM file descriptors are also used to share GEM + objects across processes. They offer additional security: as file + descriptors must be explictly sent over UNIX domain sockets to be shared + between applications, they can't be guessed like the globally unique GEM + names. + + + Drivers that support GEM file descriptors, also known as the DRM PRIME + API, must set the DRIVER_PRIME bit in the struct + drm_driver + driver_features field, and implement the + prime_handle_to_fd and + prime_fd_to_handle operations. + + + int (*prime_handle_to_fd)(struct drm_device *dev, + struct drm_file *file_priv, uint32_t handle, + uint32_t flags, int *prime_fd); + int (*prime_fd_to_handle)(struct drm_device *dev, + struct drm_file *file_priv, int prime_fd, + uint32_t *handle); + Those two operations convert a handle to a PRIME file descriptor and + vice versa. Drivers must use the kernel dma-buf buffer sharing framework + to manage the PRIME file descriptors. + + + While non-GEM drivers must implement the operations themselves, GEM + drivers must use the drm_gem_prime_handle_to_fd + and drm_gem_prime_fd_to_handle helper functions. + Those helpers rely on the driver + gem_prime_export and + gem_prime_import operations to create a dma-buf + instance from a GEM object (dma-buf exporter role) and to create a GEM + object from a dma-buf instance (dma-buf importer role). + + + struct dma_buf * (*gem_prime_export)(struct drm_device *dev, + struct drm_gem_object *obj, + int flags); + struct drm_gem_object * (*gem_prime_import)(struct drm_device *dev, + struct dma_buf *dma_buf); + These two operations are mandatory for GEM drivers that support DRM + PRIME. + + + + GEM Objects Mapping + + Because mapping operations are fairly heavyweight GEM favours + read/write-like access to buffers, implemented through driver-specific + ioctls, over mapping buffers to userspace. However, when random access + to the buffer is needed (to perform software rendering for instance), + direct access to the object can be more efficient. + + + The mmap system call can't be used directly to map GEM objects, as they + don't have their own file handle. Two alternative methods currently + co-exist to map GEM objects to userspace. The first method uses a + driver-specific ioctl to perform the mapping operation, calling + do_mmap under the hood. This is often considered + dubious, seems to be discouraged for new GEM-enabled drivers, and will + thus not be described here. + + + The second method uses the mmap system call on the DRM file handle. + void *mmap(void *addr, size_t length, int prot, int flags, int fd, + off_t offset); + DRM identifies the GEM object to be mapped by a fake offset passed + through the mmap offset argument. Prior to being mapped, a GEM object + must thus be associated with a fake offset. To do so, drivers must call + drm_gem_create_mmap_offset on the object. The + function allocates a fake offset range from a pool and stores the + offset divided by PAGE_SIZE in + obj->map_list.hash.key. Care must be taken not to + call drm_gem_create_mmap_offset if a fake offset + has already been allocated for the object. This can be tested by + obj->map_list.map being non-NULL. + + + Once allocated, the fake offset value + (obj->map_list.hash.key << PAGE_SHIFT) + must be passed to the application in a driver-specific way and can then + be used as the mmap offset argument. + + + The GEM core provides a helper method drm_gem_mmap + to handle object mapping. The method can be set directly as the mmap + file operation handler. It will look up the GEM object based on the + offset value and set the VMA operations to the + drm_driver gem_vm_ops + field. Note that drm_gem_mmap doesn't map memory to + userspace, but relies on the driver-provided fault handler to map pages + individually. + + + To use drm_gem_mmap, drivers must fill the struct + drm_driver gem_vm_ops + field with a pointer to VM operations. + + + struct vm_operations_struct *gem_vm_ops + + struct vm_operations_struct { + void (*open)(struct vm_area_struct * area); + void (*close)(struct vm_area_struct * area); + int (*fault)(struct vm_area_struct *vma, struct vm_fault *vmf); + }; + + + The open and close + operations must update the GEM object reference count. Drivers can use + the drm_gem_vm_open and + drm_gem_vm_close helper functions directly as open + and close handlers. + + + The fault operation handler is responsible for mapping individual pages + to userspace when a page fault occurs. Depending on the memory + allocation scheme, drivers can allocate pages at fault time, or can + decide to allocate memory for the GEM object at the time the object is + created. + + + Drivers that want to map the GEM object upfront instead of handling page + faults can implement their own mmap file operation handler. + + + + Dumb GEM Objects + + The GEM API doesn't standardize GEM objects creation and leaves it to + driver-specific ioctls. While not an issue for full-fledged graphics + stacks that include device-specific userspace components (in libdrm for + instance), this limit makes DRM-based early boot graphics unnecessarily + complex. + + + Dumb GEM objects partly alleviate the problem by providing a standard + API to create dumb buffers suitable for scanout, which can then be used + to create KMS frame buffers. + + + To support dumb GEM objects drivers must implement the + dumb_create, + dumb_destroy and + dumb_map_offset operations. + + + + int (*dumb_create)(struct drm_file *file_priv, struct drm_device *dev, + struct drm_mode_create_dumb *args); + + The dumb_create operation creates a GEM + object suitable for scanout based on the width, height and depth + from the struct drm_mode_create_dumb + argument. It fills the argument's handle, + pitch and size + fields with a handle for the newly created GEM object and its line + pitch and size in bytes. + + + + int (*dumb_destroy)(struct drm_file *file_priv, struct drm_device *dev, + uint32_t handle); + + The dumb_destroy operation destroys a dumb + GEM object created by dumb_create. + + + + int (*dumb_map_offset)(struct drm_file *file_priv, struct drm_device *dev, + uint32_t handle, uint64_t *offset); + + The dumb_map_offset operation associates an + mmap fake offset with the GEM object given by the handle and returns + it. Drivers must use the + drm_gem_create_mmap_offset function to + associate the fake offset as described in + . + + + + + + Memory Coherency + + When mapped to the device or used in a command buffer, backing pages + for an object are flushed to memory and marked write combined so as to + be coherent with the GPU. Likewise, if the CPU accesses an object + after the GPU has finished rendering to the object, then the object + must be made coherent with the CPU's view of memory, usually involving + GPU cache flushing of various kinds. This core CPU<->GPU + coherency management is provided by a device-specific ioctl, which + evaluates an object's current domain and performs any necessary + flushing or synchronization to put the object into the desired + coherency domain (note that the object may be busy, i.e. an active + render target; in that case, setting the domain blocks the client and + waits for rendering to complete before performing any necessary + flushing operations). + + + + Command Execution + + Perhaps the most important GEM function for GPU devices is providing a + command execution interface to clients. Client programs construct + command buffers containing references to previously allocated memory + objects, and then submit them to GEM. At that point, GEM takes care to + bind all the objects into the GTT, execute the buffer, and provide + necessary synchronization between clients accessing the same buffers. + This often involves evicting some objects from the GTT and re-binding + others (a fairly expensive operation), and providing relocation + support which hides fixed GTT offsets from clients. Clients must take + care not to submit command buffers that reference more objects than + can fit in the GTT; otherwise, GEM will reject them and no rendering + will occur. Similarly, if several objects in the buffer require fence + registers to be allocated for correct rendering (e.g. 2D blits on + pre-965 chips), care must be taken not to require more fence registers + than are available to the client. Such resource management should be + abstracted from the client in libdrm. + + + + + + Mode Setting + + Drivers must initialize the mode setting core by calling + drm_mode_config_init on the DRM device. The function + initializes the drm_device + mode_config field and never fails. Once done, + mode configuration must be setup by initializing the following fields. + + + + int min_width, min_height; +int max_width, max_height; + + Minimum and maximum width and height of the frame buffers in pixel + units. + + + + struct drm_mode_config_funcs *funcs; + Mode setting functions. + + - Output configuration + Frame Buffer Creation + struct drm_framebuffer *(*fb_create)(struct drm_device *dev, + struct drm_file *file_priv, + struct drm_mode_fb_cmd2 *mode_cmd); - The final initialization task is output configuration. This involves: - - - Finding and initializing the CRTCs, encoders, and connectors - for the device. - - - Creating an initial configuration. - - - Registering a framebuffer console driver. - - + Frame buffers are abstract memory objects that provide a source of + pixels to scanout to a CRTC. Applications explicitly request the + creation of frame buffers through the DRM_IOCTL_MODE_ADDFB(2) ioctls and + receive an opaque handle that can be passed to the KMS CRTC control, + plane configuration and page flip functions. + + + Frame buffers rely on the underneath memory manager for low-level memory + operations. When creating a frame buffer applications pass a memory + handle (or a list of memory handles for multi-planar formats) through + the drm_mode_fb_cmd2 argument. This document + assumes that the driver uses GEM, those handles thus reference GEM + objects. + + + Drivers must first validate the requested frame buffer parameters passed + through the mode_cmd argument. In particular this is where invalid + sizes, pixel formats or pitches can be caught. + + + If the parameters are deemed valid, drivers then create, initialize and + return an instance of struct drm_framebuffer. + If desired the instance can be embedded in a larger driver-specific + structure. The new instance is initialized with a call to + drm_framebuffer_init which takes a pointer to DRM + frame buffer operations (struct + drm_framebuffer_funcs). Frame buffer operations are + + + int (*create_handle)(struct drm_framebuffer *fb, + struct drm_file *file_priv, unsigned int *handle); + + Create a handle to the frame buffer underlying memory object. If + the frame buffer uses a multi-plane format, the handle will + reference the memory object associated with the first plane. + + + Drivers call drm_gem_handle_create to create + the handle. + + + + void (*destroy)(struct drm_framebuffer *framebuffer); + + Destroy the frame buffer object and frees all associated + resources. Drivers must call + drm_framebuffer_cleanup to free resources + allocated by the DRM core for the frame buffer object, and must + make sure to unreference all memory objects associated with the + frame buffer. Handles created by the + create_handle operation are released by + the DRM core. + + + + int (*dirty)(struct drm_framebuffer *framebuffer, + struct drm_file *file_priv, unsigned flags, unsigned color, + struct drm_clip_rect *clips, unsigned num_clips); + + This optional operation notifies the driver that a region of the + frame buffer has changed in response to a DRM_IOCTL_MODE_DIRTYFB + ioctl call. + + + + + + After initializing the drm_framebuffer + instance drivers must fill its width, + height, pitches, + offsets, depth, + bits_per_pixel and + pixel_format fields from the values passed + through the drm_mode_fb_cmd2 argument. They + should call the drm_helper_mode_fill_fb_struct + helper function to do so. + + + + Output Polling + void (*output_poll_changed)(struct drm_device *dev); + + This operation notifies the driver that the status of one or more + connectors has changed. Drivers that use the fb helper can just call the + drm_fb_helper_hotplug_event function to handle this + operation. + + + + + + + + KMS Initialization and Cleanup + + A KMS device is abstracted and exposed as a set of planes, CRTCs, encoders + and connectors. KMS drivers must thus create and initialize all those + objects at load time after initializing mode setting. + + + CRTCs (struct <structname>drm_crtc</structname>) + + A CRTC is an abstraction representing a part of the chip that contains a + pointer to a scanout buffer. Therefore, the number of CRTCs available + determines how many independent scanout buffers can be active at any + given time. The CRTC structure contains several fields to support this: + a pointer to some video memory (abstracted as a frame buffer object), a + display mode, and an (x, y) offset into the video memory to support + panning or configurations where one piece of video memory spans multiple + CRTCs. - Output discovery and initialization - - Several core functions exist to create CRTCs, encoders, and - connectors, namely: drm_crtc_init(), drm_connector_init(), and - drm_encoder_init(), along with several "helper" functions to - perform common tasks. - - - Connectors should be registered with sysfs once they've been - detected and initialized, using the - drm_sysfs_connector_add() function. Likewise, when they're - removed from the system, they should be destroyed with - drm_sysfs_connector_remove(). - - -CRTC Initialization + + A KMS device must create and register at least one struct + drm_crtc instance. The instance is allocated + and zeroed by the driver, possibly as part of a larger structure, and + registered with a call to drm_crtc_init with a + pointer to CRTC functions. + + + + CRTC Operations + + Set Configuration + int (*set_config)(struct drm_mode_set *set); + + Apply a new CRTC configuration to the device. The configuration + specifies a CRTC, a frame buffer to scan out from, a (x,y) position in + the frame buffer, a display mode and an array of connectors to drive + with the CRTC if possible. + + + If the frame buffer specified in the configuration is NULL, the driver + must detach all encoders connected to the CRTC and all connectors + attached to those encoders and disable them. + + + This operation is called with the mode config lock held. + + + FIXME: How should set_config interact with DPMS? If the CRTC is + suspended, should it be resumed? + + + + Page Flipping + int (*page_flip)(struct drm_crtc *crtc, struct drm_framebuffer *fb, + struct drm_pending_vblank_event *event); + + Schedule a page flip to the given frame buffer for the CRTC. This + operation is called with the mode config mutex held. + + + Page flipping is a synchronization mechanism that replaces the frame + buffer being scanned out by the CRTC with a new frame buffer during + vertical blanking, avoiding tearing. When an application requests a page + flip the DRM core verifies that the new frame buffer is large enough to + be scanned out by the CRTC in the currently configured mode and then + calls the CRTC page_flip operation with a + pointer to the new frame buffer. + + + The page_flip operation schedules a page flip. + Once any pending rendering targetting the new frame buffer has + completed, the CRTC will be reprogrammed to display that frame buffer + after the next vertical refresh. The operation must return immediately + without waiting for rendering or page flip to complete and must block + any new rendering to the frame buffer until the page flip completes. + + + If a page flip is already pending, the + page_flip operation must return + -EBUSY. + + + To synchronize page flip to vertical blanking the driver will likely + need to enable vertical blanking interrupts. It should call + drm_vblank_get for that purpose, and call + drm_vblank_put after the page flip completes. + + + If the application has requested to be notified when page flip completes + the page_flip operation will be called with a + non-NULL event argument pointing to a + drm_pending_vblank_event instance. Upon page + flip completion the driver must fill the + event::event + sequence, tv_sec + and tv_usec fields with the associated + vertical blanking count and timestamp, add the event to the + drm_file list of events to be signaled, and wake + up any waiting process. This can be performed with + event.sequence = drm_vblank_count_and_time(..., &now); + event->event.tv_sec = now.tv_sec; + event->event.tv_usec = now.tv_usec; + + spin_lock_irqsave(&dev->event_lock, flags); + list_add_tail(&event->base.link, &event->base.file_priv->event_list); + wake_up_interruptible(&event->base.file_priv->event_wait); + spin_unlock_irqrestore(&dev->event_lock, flags); + ]]> + + + FIXME: Could drivers that don't need to wait for rendering to complete + just add the event to dev->vblank_event_list and + let the DRM core handle everything, as for "normal" vertical blanking + events? + + + While waiting for the page flip to complete, the + event->base.link list head can be used freely by + the driver to store the pending event in a driver-specific list. + + + If the file handle is closed before the event is signaled, drivers must + take care to destroy the event in their + preclose operation (and, if needed, call + drm_vblank_put). + + + + Miscellaneous + + + void (*gamma_set)(struct drm_crtc *crtc, u16 *r, u16 *g, u16 *b, + uint32_t start, uint32_t size); + + Apply a gamma table to the device. The operation is optional. + + + + void (*destroy)(struct drm_crtc *crtc); + + Destroy the CRTC when not needed anymore. See + . + + + + + + + + Planes (struct <structname>drm_plane</structname>) + + A plane represents an image source that can be blended with or overlayed + on top of a CRTC during the scanout process. Planes are associated with + a frame buffer to crop a portion of the image memory (source) and + optionally scale it to a destination size. The result is then blended + with or overlayed on top of a CRTC. + + + Plane Initialization + + Planes are optional. To create a plane, a KMS drivers allocates and + zeroes an instances of struct drm_plane + (possibly as part of a larger structure) and registers it with a call + to drm_plane_init. The function takes a bitmask + of the CRTCs that can be associated with the plane, a pointer to the + plane functions and a list of format supported formats. + + + + Plane Operations + + + int (*update_plane)(struct drm_plane *plane, struct drm_crtc *crtc, + struct drm_framebuffer *fb, int crtc_x, int crtc_y, + unsigned int crtc_w, unsigned int crtc_h, + uint32_t src_x, uint32_t src_y, + uint32_t src_w, uint32_t src_h); + + Enable and configure the plane to use the given CRTC and frame buffer. + + + The source rectangle in frame buffer memory coordinates is given by + the src_x, src_y, + src_w and src_h + parameters (as 16.16 fixed point values). Devices that don't support + subpixel plane coordinates can ignore the fractional part. + + + The destination rectangle in CRTC coordinates is given by the + crtc_x, crtc_y, + crtc_w and crtc_h + parameters (as integer values). Devices scale the source rectangle to + the destination rectangle. If scaling is not supported, and the source + rectangle size doesn't match the destination rectangle size, the + driver must return a -EINVAL error. + + + + int (*disable_plane)(struct drm_plane *plane); + + Disable the plane. The DRM core calls this method in response to a + DRM_IOCTL_MODE_SETPLANE ioctl call with the frame buffer ID set to 0. + Disabled planes must not be processed by the CRTC. + + + + void (*destroy)(struct drm_plane *plane); + + Destroy the plane when not needed anymore. See + . + + + + + + + Encoders (struct <structname>drm_encoder</structname>) + + An encoder takes pixel data from a CRTC and converts it to a format + suitable for any attached connectors. On some devices, it may be + possible to have a CRTC send data to more than one encoder. In that + case, both encoders would receive data from the same scanout buffer, + resulting in a "cloned" display configuration across the connectors + attached to each encoder. + + + Encoder Initialization + + As for CRTCs, a KMS driver must create, initialize and register at + least one struct drm_encoder instance. The + instance is allocated and zeroed by the driver, possibly as part of a + larger structure. + + + Drivers must initialize the struct drm_encoder + possible_crtcs and + possible_clones fields before registering the + encoder. Both fields are bitmasks of respectively the CRTCs that the + encoder can be connected to, and sibling encoders candidate for cloning. + + + After being initialized, the encoder must be registered with a call to + drm_encoder_init. The function takes a pointer to + the encoder functions and an encoder type. Supported types are + + + DRM_MODE_ENCODER_DAC for VGA and analog on DVI-I/DVI-A + + + DRM_MODE_ENCODER_TMDS for DVI, HDMI and (embedded) DisplayPort + + + DRM_MODE_ENCODER_LVDS for display panels + + + DRM_MODE_ENCODER_TVDAC for TV output (Composite, S-Video, Component, + SCART) + + + DRM_MODE_ENCODER_VIRTUAL for virtual machine displays + + + + + Encoders must be attached to a CRTC to be used. DRM drivers leave + encoders unattached at initialization time. Applications (or the fbdev + compatibility layer when implemented) are responsible for attaching the + encoders they want to use to a CRTC. + + + + Encoder Operations + + + void (*destroy)(struct drm_encoder *encoder); + + Called to destroy the encoder when not needed anymore. See + . + + + + + + + Connectors (struct <structname>drm_connector</structname>) + + A connector is the final destination for pixel data on a device, and + usually connects directly to an external display device like a monitor + or laptop panel. A connector can only be attached to one encoder at a + time. The connector is also the structure where information about the + attached display is kept, so it contains fields for display data, EDID + data, DPMS & connection status, and information about modes + supported on the attached displays. + + + Connector Initialization + + Finally a KMS driver must create, initialize, register and attach at + least one struct drm_connector instance. The + instance is created as other KMS objects and initialized by setting the + following fields. + + + + interlace_allowed + + Whether the connector can handle interlaced modes. + + + + doublescan_allowed + + Whether the connector can handle doublescan. + + + + display_info + + + Display information is filled from EDID information when a display + is detected. For non hot-pluggable displays such as flat panels in + embedded systems, the driver should initialize the + display_info.width_mm + and + display_info.height_mm + fields with the physical size of the display. + + + + polled + + Connector polling mode, a combination of + + + DRM_CONNECTOR_POLL_HPD + + The connector generates hotplug events and doesn't need to be + periodically polled. The CONNECT and DISCONNECT flags must not + be set together with the HPD flag. + + + + DRM_CONNECTOR_POLL_CONNECT + + Periodically poll the connector for connection. + + + + DRM_CONNECTOR_POLL_DISCONNECT + + Periodically poll the connector for disconnection. + + + + Set to 0 for connectors that don't support connection status + discovery. + + + + + The connector is then registered with a call to + drm_connector_init with a pointer to the connector + functions and a connector type, and exposed through sysfs with a call to + drm_sysfs_connector_add. + + + Supported connector types are + + DRM_MODE_CONNECTOR_VGA + DRM_MODE_CONNECTOR_DVII + DRM_MODE_CONNECTOR_DVID + DRM_MODE_CONNECTOR_DVIA + DRM_MODE_CONNECTOR_Composite + DRM_MODE_CONNECTOR_SVIDEO + DRM_MODE_CONNECTOR_LVDS + DRM_MODE_CONNECTOR_Component + DRM_MODE_CONNECTOR_9PinDIN + DRM_MODE_CONNECTOR_DisplayPort + DRM_MODE_CONNECTOR_HDMIA + DRM_MODE_CONNECTOR_HDMIB + DRM_MODE_CONNECTOR_TV + DRM_MODE_CONNECTOR_eDP + DRM_MODE_CONNECTOR_VIRTUAL + + + + Connectors must be attached to an encoder to be used. For devices that + map connectors to encoders 1:1, the connector should be attached at + initialization time with a call to + drm_mode_connector_attach_encoder. The driver must + also set the drm_connector + encoder field to point to the attached + encoder. + + + Finally, drivers must initialize the connectors state change detection + with a call to drm_kms_helper_poll_init. If at + least one connector is pollable but can't generate hotplug interrupts + (indicated by the DRM_CONNECTOR_POLL_CONNECT and + DRM_CONNECTOR_POLL_DISCONNECT connector flags), a delayed work will + automatically be queued to periodically poll for changes. Connectors + that can generate hotplug interrupts must be marked with the + DRM_CONNECTOR_POLL_HPD flag instead, and their interrupt handler must + call drm_helper_hpd_irq_event. The function will + queue a delayed work to check the state of all connectors, but no + periodic polling will be done. + + + + Connector Operations + + Unless otherwise state, all operations are mandatory. + + + DPMS + void (*dpms)(struct drm_connector *connector, int mode); + + The DPMS operation sets the power state of a connector. The mode + argument is one of + + DRM_MODE_DPMS_ON + DRM_MODE_DPMS_STANDBY + DRM_MODE_DPMS_SUSPEND + DRM_MODE_DPMS_OFF + + + + In all but DPMS_ON mode the encoder to which the connector is attached + should put the display in low-power mode by driving its signals + appropriately. If more than one connector is attached to the encoder + care should be taken not to change the power state of other displays as + a side effect. Low-power mode should be propagated to the encoders and + CRTCs when all related connectors are put in low-power mode. + + + + Modes + int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, + uint32_t max_height); + + Fill the mode list with all supported modes for the connector. If the + max_width and max_height + arguments are non-zero, the implementation must ignore all modes wider + than max_width or higher than + max_height. + + + The connector must also fill in this operation its + display_info + width_mm and + height_mm fields with the connected display + physical size in millimeters. The fields should be set to 0 if the value + isn't known or is not applicable (for instance for projector devices). + + + + Connection Status + + The connection status is updated through polling or hotplug events when + supported (see ). The status + value is reported to userspace through ioctls and must not be used + inside the driver, as it only gets initialized by a call to + drm_mode_getconnector from userspace. + + enum drm_connector_status (*detect)(struct drm_connector *connector, + bool force); + + Check to see if anything is attached to the connector. The + force parameter is set to false whilst polling or + to true when checking the connector due to user request. + force can be used by the driver to avoid + expensive, destructive operations during automated probing. + + + Return connector_status_connected if something is connected to the + connector, connector_status_disconnected if nothing is connected and + connector_status_unknown if the connection state isn't known. + + + Drivers should only return connector_status_connected if the connection + status has really been probed as connected. Connectors that can't detect + the connection status, or failed connection status probes, should return + connector_status_unknown. + + + + Miscellaneous + + + void (*destroy)(struct drm_connector *connector); + + Destroy the connector when not needed anymore. See + . + + + + + + + + Cleanup + + The DRM core manages its objects' lifetime. When an object is not needed + anymore the core calls its destroy function, which must clean up and + free every resource allocated for the object. Every + drm_*_init call must be matched with a + corresponding drm_*_cleanup call to cleanup CRTCs + (drm_crtc_cleanup), planes + (drm_plane_cleanup), encoders + (drm_encoder_cleanup) and connectors + (drm_connector_cleanup). Furthermore, connectors + that have been added to sysfs must be removed by a call to + drm_sysfs_connector_remove before calling + drm_connector_cleanup. + + + Connectors state change detection must be cleanup up with a call to + drm_kms_helper_poll_fini. + + + + Output discovery and initialization example + - - - In the example above (again, taken from the i915 driver), a - CRT connector and encoder combination is created. A device-specific - i2c bus is also created for fetching EDID data and - performing monitor detection. Once the process is complete, - the new connector is registered with sysfs to make its - properties available to applications. - - - Helper functions and core functions - - Since many PC-class graphics devices have similar display output - designs, the DRM provides a set of helper functions to make - output management easier. The core helper routines handle - encoder re-routing and the disabling of unused functions following - mode setting. Using the helpers is optional, but recommended for - devices with PC-style architectures (i.e. a set of display planes - for feeding pixels to encoders which are in turn routed to - connectors). Devices with more complex requirements needing - finer grained management may opt to use the core callbacks - directly. - - - [Insert typical diagram here.] [Insert OMAP style config here.] - - - - Each encoder object needs to provide: - - - A DPMS (basically on/off) function. - - - A mode-fixup function (for converting requested modes into - native hardware timings). - - - Functions (prepare, set, and commit) for use by the core DRM - helper functions. - - - Connector helpers need to provide functions (mode-fetch, validity, - and encoder-matching) for returning an ideal encoder for a given - connector. The core connector functions include a DPMS callback, - save/restore routines (deprecated), detection, mode probing, - property handling, and cleanup functions. - - - - - +}]]> + + In the example above (taken from the i915 driver), a CRTC, connector and + encoder combination is created. A device-specific i2c bus is also + created for fetching EDID data and performing monitor detection. Once + the process is complete, the new connector is registered with sysfs to + make its properties available to applications. + - + - VBlank event handling + Mid-layer Helper Functions - The DRM core exposes two vertical blank related ioctls: - - - DRM_IOCTL_WAIT_VBLANK - - - This takes a struct drm_wait_vblank structure as its argument, - and it is used to block or request a signal when a specified - vblank event occurs. - - - - - DRM_IOCTL_MODESET_CTL - - - This should be called by application level drivers before and - after mode setting, since on many devices the vertical blank - counter is reset at that time. Internally, the DRM snapshots - the last vblank count when the ioctl is called with the - _DRM_PRE_MODESET command, so that the counter won't go backwards - (which is dealt with when _DRM_POST_MODESET is used). - - - - - + The CRTC, encoder and connector functions provided by the drivers + implement the DRM API. They're called by the DRM core and ioctl handlers + to handle device state changes and configuration request. As implementing + those functions often requires logic not specific to drivers, mid-layer + helper functions are available to avoid duplicating boilerplate code. + + + The DRM core contains one mid-layer implementation. The mid-layer provides + implementations of several CRTC, encoder and connector functions (called + from the top of the mid-layer) that pre-process requests and call + lower-level functions provided by the driver (at the bottom of the + mid-layer). For instance, the + drm_crtc_helper_set_config function can be used to + fill the struct drm_crtc_funcs + set_config field. When called, it will split + the set_config operation in smaller, simpler + operations and call the driver to handle them. - To support the functions above, the DRM core provides several - helper functions for tracking vertical blank counters, and - requires drivers to provide several callbacks: - get_vblank_counter(), enable_vblank() and disable_vblank(). The - core uses get_vblank_counter() to keep the counter accurate - across interrupt disable periods. It should return the current - vertical blank event count, which is often tracked in a device - register. The enable and disable vblank callbacks should enable - and disable vertical blank interrupts, respectively. In the - absence of DRM clients waiting on vblank events, the core DRM - code uses the disable_vblank() function to disable - interrupts, which saves power. They are re-enabled again when - a client calls the vblank wait ioctl above. + To use the mid-layer, drivers call drm_crtc_helper_add, + drm_encoder_helper_add and + drm_connector_helper_add functions to install their + mid-layer bottom operations handlers, and fill the + drm_crtc_funcs, + drm_encoder_funcs and + drm_connector_funcs structures with pointers to + the mid-layer top API functions. Installing the mid-layer bottom operation + handlers is best done right after registering the corresponding KMS object. - A device that doesn't provide a count register may simply use an - internal atomic counter incremented on every vertical blank - interrupt (and then treat the enable_vblank() and disable_vblank() - callbacks as no-ops). + The mid-layer is not split between CRTC, encoder and connector operations. + To use it, a driver must provide bottom functions for all of the three KMS + entities. + + Helper Functions + + + int drm_crtc_helper_set_config(struct drm_mode_set *set); + + The drm_crtc_helper_set_config helper function + is a CRTC set_config implementation. It + first tries to locate the best encoder for each connector by calling + the connector best_encoder helper + operation. + + + After locating the appropriate encoders, the helper function will + call the mode_fixup encoder and CRTC helper + operations to adjust the requested mode, or reject it completely in + which case an error will be returned to the application. If the new + configuration after mode adjustment is identical to the current + configuration the helper function will return without performing any + other operation. + + + If the adjusted mode is identical to the current mode but changes to + the frame buffer need to be applied, the + drm_crtc_helper_set_config function will call + the CRTC mode_set_base helper operation. If + the adjusted mode differs from the current mode, or if the + mode_set_base helper operation is not + provided, the helper function performs a full mode set sequence by + calling the prepare, + mode_set and + commit CRTC and encoder helper operations, + in that order. + + + + void drm_helper_connector_dpms(struct drm_connector *connector, int mode); + + The drm_helper_connector_dpms helper function + is a connector dpms implementation that + tracks power state of connectors. To use the function, drivers must + provide dpms helper operations for CRTCs + and encoders to apply the DPMS state to the device. + + + The mid-layer doesn't track the power state of CRTCs and encoders. + The dpms helper operations can thus be + called with a mode identical to the currently active mode. + + + + int drm_helper_probe_single_connector_modes(struct drm_connector *connector, + uint32_t maxX, uint32_t maxY); + + The drm_helper_probe_single_connector_modes helper + function is a connector fill_modes + implementation that updates the connection status for the connector + and then retrieves a list of modes by calling the connector + get_modes helper operation. + + + The function filters out modes larger than + max_width and max_height + if specified. It then calls the connector + mode_valid helper operation for each mode in + the probed list to check whether the mode is valid for the connector. + + + + + + CRTC Helper Operations + + + bool (*mode_fixup)(struct drm_crtc *crtc, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + + Let CRTCs adjust the requested mode or reject it completely. This + operation returns true if the mode is accepted (possibly after being + adjusted) or false if it is rejected. + + + The mode_fixup operation should reject the + mode if it can't reasonably use it. The definition of "reasonable" + is currently fuzzy in this context. One possible behaviour would be + to set the adjusted mode to the panel timings when a fixed-mode + panel is used with hardware capable of scaling. Another behaviour + would be to accept any input mode and adjust it to the closest mode + supported by the hardware (FIXME: This needs to be clarified). + + + + int (*mode_set_base)(struct drm_crtc *crtc, int x, int y, + struct drm_framebuffer *old_fb) + + Move the CRTC on the current frame buffer (stored in + crtc->fb) to position (x,y). Any of the frame + buffer, x position or y position may have been modified. + + + This helper operation is optional. If not provided, the + drm_crtc_helper_set_config function will fall + back to the mode_set helper operation. + + + FIXME: Why are x and y passed as arguments, as they can be accessed + through crtc->x and + crtc->y? + + + + void (*prepare)(struct drm_crtc *crtc); + + Prepare the CRTC for mode setting. This operation is called after + validating the requested mode. Drivers use it to perform + device-specific operations required before setting the new mode. + + + + int (*mode_set)(struct drm_crtc *crtc, struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode, int x, int y, + struct drm_framebuffer *old_fb); + + Set a new mode, position and frame buffer. Depending on the device + requirements, the mode can be stored internally by the driver and + applied in the commit operation, or + programmed to the hardware immediately. + + + The mode_set operation returns 0 on success + or a negative error code if an error occurs. + + + + void (*commit)(struct drm_crtc *crtc); + + Commit a mode. This operation is called after setting the new mode. + Upon return the device must use the new mode and be fully + operational. + + + + + + Encoder Helper Operations + + + bool (*mode_fixup)(struct drm_encoder *encoder, + const struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + + FIXME: The mode argument be const, but the i915 driver modifies + mode->clock in intel_dp_mode_fixup. + + + Let encoders adjust the requested mode or reject it completely. This + operation returns true if the mode is accepted (possibly after being + adjusted) or false if it is rejected. See the + mode_fixup CRTC helper + operation for an explanation of the allowed adjustments. + + + + void (*prepare)(struct drm_encoder *encoder); + + Prepare the encoder for mode setting. This operation is called after + validating the requested mode. Drivers use it to perform + device-specific operations required before setting the new mode. + + + + void (*mode_set)(struct drm_encoder *encoder, + struct drm_display_mode *mode, + struct drm_display_mode *adjusted_mode); + + Set a new mode. Depending on the device requirements, the mode can + be stored internally by the driver and applied in the + commit operation, or programmed to the + hardware immediately. + + + + void (*commit)(struct drm_encoder *encoder); + + Commit a mode. This operation is called after setting the new mode. + Upon return the device must use the new mode and be fully + operational. + + + + + + Connector Helper Operations + + + struct drm_encoder *(*best_encoder)(struct drm_connector *connector); + + Return a pointer to the best encoder for the connecter. Device that + map connectors to encoders 1:1 simply return the pointer to the + associated encoder. This operation is mandatory. + + + + int (*get_modes)(struct drm_connector *connector); + + Fill the connector's probed_modes list + by parsing EDID data with drm_add_edid_modes or + calling drm_mode_probed_add directly for every + supported mode and return the number of modes it has detected. This + operation is mandatory. + + + When adding modes manually the driver creates each mode with a call to + drm_mode_create and must fill the following fields. + + + __u32 type; + + Mode type bitmask, a combination of + + + DRM_MODE_TYPE_BUILTIN + not used? + + + DRM_MODE_TYPE_CLOCK_C + not used? + + + DRM_MODE_TYPE_CRTC_C + not used? + + + + DRM_MODE_TYPE_PREFERRED - The preferred mode for the connector + + + not used? + + + + DRM_MODE_TYPE_DEFAULT + not used? + + + DRM_MODE_TYPE_USERDEF + not used? + + + DRM_MODE_TYPE_DRIVER + + + The mode has been created by the driver (as opposed to + to user-created modes). + + + + + Drivers must set the DRM_MODE_TYPE_DRIVER bit for all modes they + create, and set the DRM_MODE_TYPE_PREFERRED bit for the preferred + mode. + + + + __u32 clock; + Pixel clock frequency in kHz unit + + + __u16 hdisplay, hsync_start, hsync_end, htotal; + __u16 vdisplay, vsync_start, vsync_end, vtotal; + Horizontal and vertical timing information + <----------------><-------------><--------------> + + //////////////////////| + ////////////////////// | + ////////////////////// |.................. ................ + _______________ + + <----- [hv]display -----> + <------------- [hv]sync_start ------------> + <--------------------- [hv]sync_end ---------------------> + <-------------------------------- [hv]total -----------------------------> +]]> + + + __u16 hskew; + __u16 vscan; + Unknown + + + __u32 flags; + + Mode flags, a combination of + + + DRM_MODE_FLAG_PHSYNC + + Horizontal sync is active high + + + + DRM_MODE_FLAG_NHSYNC + + Horizontal sync is active low + + + + DRM_MODE_FLAG_PVSYNC + + Vertical sync is active high + + + + DRM_MODE_FLAG_NVSYNC + + Vertical sync is active low + + + + DRM_MODE_FLAG_INTERLACE + + Mode is interlaced + + + + DRM_MODE_FLAG_DBLSCAN + + Mode uses doublescan + + + + DRM_MODE_FLAG_CSYNC + + Mode uses composite sync + + + + DRM_MODE_FLAG_PCSYNC + + Composite sync is active high + + + + DRM_MODE_FLAG_NCSYNC + + Composite sync is active low + + + + DRM_MODE_FLAG_HSKEW + + hskew provided (not used?) + + + + DRM_MODE_FLAG_BCAST + + not used? + + + + DRM_MODE_FLAG_PIXMUX + + not used? + + + + DRM_MODE_FLAG_DBLCLK + + not used? + + + + DRM_MODE_FLAG_CLKDIV2 + + ? + + + + + + Note that modes marked with the INTERLACE or DBLSCAN flags will be + filtered out by + drm_helper_probe_single_connector_modes if + the connector's interlace_allowed or + doublescan_allowed field is set to 0. + + + + char name[DRM_DISPLAY_MODE_LEN]; + + Mode name. The driver must call + drm_mode_set_name to fill the mode name from + hdisplay, + vdisplay and interlace flag after + filling the corresponding fields. + + + + + + The vrefresh value is computed by + drm_helper_probe_single_connector_modes. + + + When parsing EDID data, drm_add_edid_modes fill the + connector display_info + width_mm and + height_mm fields. When creating modes + manually the get_modes helper operation must + set the display_info + width_mm and + height_mm fields if they haven't been set + already (for instance at initilization time when a fixed-size panel is + attached to the connector). The mode width_mm + and height_mm fields are only used internally + during EDID parsing and should not be set when creating modes manually. + + + + int (*mode_valid)(struct drm_connector *connector, + struct drm_display_mode *mode); + + Verify whether a mode is valid for the connector. Return MODE_OK for + supported modes and one of the enum drm_mode_status values (MODE_*) + for unsupported modes. This operation is mandatory. + + + As the mode rejection reason is currently not used beside for + immediately removing the unsupported mode, an implementation can + return MODE_BAD regardless of the exact reason why the mode is not + valid. + + + Note that the mode_valid helper operation is + only called for modes detected by the device, and + not for modes set by the user through the CRTC + set_config operation. + + + + - - Memory management + + + + Vertical Blanking + + Vertical blanking plays a major role in graphics rendering. To achieve + tear-free display, users must synchronize page flips and/or rendering to + vertical blanking. The DRM API offers ioctls to perform page flips + synchronized to vertical blanking and wait for vertical blanking. + + + The DRM core handles most of the vertical blanking management logic, which + involves filtering out spurious interrupts, keeping race-free blanking + counters, coping with counter wrap-around and resets and keeping use + counts. It relies on the driver to generate vertical blanking interrupts + and optionally provide a hardware vertical blanking counter. Drivers must + implement the following operations. + + + + int (*enable_vblank) (struct drm_device *dev, int crtc); +void (*disable_vblank) (struct drm_device *dev, int crtc); + + Enable or disable vertical blanking interrupts for the given CRTC. + + + + u32 (*get_vblank_counter) (struct drm_device *dev, int crtc); + + Retrieve the value of the vertical blanking counter for the given + CRTC. If the hardware maintains a vertical blanking counter its value + should be returned. Otherwise drivers can use the + drm_vblank_count helper function to handle this + operation. + + + - The memory manager lies at the heart of many DRM operations; it - is required to support advanced client features like OpenGL - pbuffers. The DRM currently contains two memory managers: TTM - and GEM. + Drivers must initialize the vertical blanking handling core with a call to + drm_vblank_init in their + load operation. The function will set the struct + drm_device + vblank_disable_allowed field to 0. This will + keep vertical blanking interrupts enabled permanently until the first mode + set operation, where vblank_disable_allowed is + set to 1. The reason behind this is not clear. Drivers can set the field + to 1 after calling drm_vblank_init to make vertical + blanking interrupts dynamically managed from the beginning. + + Vertical blanking interrupts can be enabled by the DRM core or by drivers + themselves (for instance to handle page flipping operations). The DRM core + maintains a vertical blanking use count to ensure that the interrupts are + not disabled while a user still needs them. To increment the use count, + drivers call drm_vblank_get. Upon return vertical + blanking interrupts are guaranteed to be enabled. + + + To decrement the use count drivers call + drm_vblank_put. Only when the use count drops to zero + will the DRM core disable the vertical blanking interrupts after a delay + by scheduling a timer. The delay is accessible through the vblankoffdelay + module parameter or the drm_vblank_offdelay global + variable and expressed in milliseconds. Its default value is 5000 ms. + + + When a vertical blanking interrupt occurs drivers only need to call the + drm_handle_vblank function to account for the + interrupt. + + + Resources allocated by drm_vblank_init must be freed + with a call to drm_vblank_cleanup in the driver + unload operation handler. + + + + + + Open/Close, File Operations and IOCTLs - The Translation Table Manager (TTM) + Open and Close + int (*firstopen) (struct drm_device *); +void (*lastclose) (struct drm_device *); +int (*open) (struct drm_device *, struct drm_file *); +void (*preclose) (struct drm_device *, struct drm_file *); +void (*postclose) (struct drm_device *, struct drm_file *); + Open and close handlers. None of those methods are mandatory. + - TTM was developed by Tungsten Graphics, primarily by Thomas - Hellström, and is intended to be a flexible, high performance - graphics memory manager. + The firstopen method is called by the DRM core + when an application opens a device that has no other opened file handle. + Similarly the lastclose method is called when + the last application holding a file handle opened on the device closes + it. Both methods are mostly used for UMS (User Mode Setting) drivers to + acquire and release device resources which should be done in the + load and unload + methods for KMS drivers. - Drivers wishing to support TTM must fill out a drm_bo_driver - structure. + Note that the lastclose method is also called + at module unload time or, for hot-pluggable devices, when the device is + unplugged. The firstopen and + lastclose calls can thus be unbalanced. - TTM design background and information belongs here. + The open method is called every time the device + is opened by an application. Drivers can allocate per-file private data + in this method and store them in the struct + drm_file driver_priv + field. Note that the open method is called + before firstopen. + + + The close operation is split into preclose and + postclose methods. Drivers must stop and + cleanup all per-file operations in the preclose + method. For instance pending vertical blanking and page flip events must + be cancelled. No per-file operation is allowed on the file handle after + returning from the preclose method. + + + Finally the postclose method is called as the + last step of the close operation, right before calling the + lastclose method if no other open file handle + exists for the device. Drivers that have allocated per-file private data + in the open method should free it here. + + + The lastclose method should restore CRTC and + plane properties to default value, so that a subsequent open of the + device will not inherit state from the previous user. - - The Graphics Execution Manager (GEM) + File Operations + const struct file_operations *fops + File operations for the DRM device node. - GEM is an Intel project, authored by Eric Anholt and Keith - Packard. It provides simpler interfaces than TTM, and is well - suited for UMA devices. + Drivers must define the file operations structure that forms the DRM + userspace API entry point, even though most of those operations are + implemented in the DRM core. The open, + release and ioctl + operations are handled by + + .owner = THIS_MODULE, + .open = drm_open, + .release = drm_release, + .unlocked_ioctl = drm_ioctl, + #ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, + #endif + - GEM-enabled drivers must provide gem_init_object() and - gem_free_object() callbacks to support the core memory - allocation routines. They should also provide several driver-specific - ioctls to support command execution, pinning, buffer - read & write, mapping, and domain ownership transfers. + Drivers that implement private ioctls that requires 32/64bit + compatibility support must provide their own + compat_ioctl handler that processes private + ioctls and calls drm_compat_ioctl for core ioctls. - On a fundamental level, GEM involves several operations: - - Memory allocation and freeing - Command execution - Aperture management at command execution time - - Buffer object allocation is relatively - straightforward and largely provided by Linux's shmem layer, which - provides memory to back each object. When mapped into the GTT - or used in a command buffer, the backing pages for an object are - flushed to memory and marked write combined so as to be coherent - with the GPU. Likewise, if the CPU accesses an object after the GPU - has finished rendering to the object, then the object must be made - coherent with the CPU's view - of memory, usually involving GPU cache flushing of various kinds. - This core CPU<->GPU coherency management is provided by a - device-specific ioctl, which evaluates an object's current domain and - performs any necessary flushing or synchronization to put the object - into the desired coherency domain (note that the object may be busy, - i.e. an active render target; in that case, setting the domain - blocks the client and waits for rendering to complete before - performing any necessary flushing operations). - - - Perhaps the most important GEM function is providing a command - execution interface to clients. Client programs construct command - buffers containing references to previously allocated memory objects, - and then submit them to GEM. At that point, GEM takes care to bind - all the objects into the GTT, execute the buffer, and provide - necessary synchronization between clients accessing the same buffers. - This often involves evicting some objects from the GTT and re-binding - others (a fairly expensive operation), and providing relocation - support which hides fixed GTT offsets from clients. Clients must - take care not to submit command buffers that reference more objects - than can fit in the GTT; otherwise, GEM will reject them and no rendering - will occur. Similarly, if several objects in the buffer require - fence registers to be allocated for correct rendering (e.g. 2D blits - on pre-965 chips), care must be taken not to require more fence - registers than are available to the client. Such resource management - should be abstracted from the client in libdrm. + The read and poll + operations provide support for reading DRM events and polling them. They + are implemented by + + .poll = drm_poll, + .read = drm_read, + .fasync = drm_fasync, + .llseek = no_llseek, + + + + The memory mapping implementation varies depending on how the driver + manages memory. Pre-GEM drivers will use drm_mmap, + while GEM-aware drivers will use drm_gem_mmap. See + . + + .mmap = drm_gem_mmap, + + + + No other file operation is supported by the DRM API. + + + + IOCTLs + struct drm_ioctl_desc *ioctls; +int num_ioctls; + Driver-specific ioctls descriptors table. + + Driver-specific ioctls numbers start at DRM_COMMAND_BASE. The ioctls + descriptors table is indexed by the ioctl number offset from the base + value. Drivers can use the DRM_IOCTL_DEF_DRV() macro to initialize the + table entries. + + + DRM_IOCTL_DEF_DRV(ioctl, func, flags) + + ioctl is the ioctl name. Drivers must define + the DRM_##ioctl and DRM_IOCTL_##ioctl macros to the ioctl number + offset from DRM_COMMAND_BASE and the ioctl number respectively. The + first macro is private to the device while the second must be exposed + to userspace in a public header. + + + func is a pointer to the ioctl handler function + compatible with the drm_ioctl_t type. + typedef int drm_ioctl_t(struct drm_device *dev, void *data, + struct drm_file *file_priv); + + + flags is a bitmask combination of the following + values. It restricts how the ioctl is allowed to be called. + + + DRM_AUTH - Only authenticated callers allowed + + + DRM_MASTER - The ioctl can only be called on the master file + handle + + + DRM_ROOT_ONLY - Only callers with the SYSADMIN capability allowed + + + DRM_CONTROL_ALLOW - The ioctl can only be called on a control + device + + + DRM_UNLOCKED - The ioctl handler will be called without locking + the DRM global mutex + + + - - - - - - Output management - - At the core of the DRM output management code is a set of - structures representing CRTCs, encoders, and connectors. - - - A CRTC is an abstraction representing a part of the chip that - contains a pointer to a scanout buffer. Therefore, the number - of CRTCs available determines how many independent scanout - buffers can be active at any given time. The CRTC structure - contains several fields to support this: a pointer to some video - memory, a display mode, and an (x, y) offset into the video - memory to support panning or configurations where one piece of - video memory spans multiple CRTCs. - - - An encoder takes pixel data from a CRTC and converts it to a - format suitable for any attached connectors. On some devices, - it may be possible to have a CRTC send data to more than one - encoder. In that case, both encoders would receive data from - the same scanout buffer, resulting in a "cloned" display - configuration across the connectors attached to each encoder. - - - A connector is the final destination for pixel data on a device, - and usually connects directly to an external display device like - a monitor or laptop panel. A connector can only be attached to - one encoder at a time. The connector is also the structure - where information about the attached display is kept, so it - contains fields for display data, EDID data, DPMS & - connection status, and information about modes supported on the - attached displays. - - - - - - Framebuffer management - - Clients need to provide a framebuffer object which provides a source - of pixels for a CRTC to deliver to the encoder(s) and ultimately the - connector(s). A framebuffer is fundamentally a driver-specific memory - object, made into an opaque handle by the DRM's addfb() function. - Once a framebuffer has been created this way, it may be passed to the - KMS mode setting routines for use in a completed configuration. - @@ -812,15 +2355,24 @@ void intel_crt_init(struct drm_device *dev) + + - Suspend/resume + Suspend/Resume + + The DRM core provides some suspend/resume code, but drivers wanting full + suspend/resume support should provide save() and restore() functions. + These are called at suspend, hibernate, or resume time, and should perform + any state save or restore required by your device across suspend or + hibernate states. + + int (*suspend) (struct drm_device *, pm_message_t state); +int (*resume) (struct drm_device *); - The DRM core provides some suspend/resume code, but drivers - wanting full suspend/resume support should provide save() and - restore() functions. These are called at suspend, - hibernate, or resume time, and should perform any state save or - restore required by your device across suspend or hibernate - states. + Those are legacy suspend and resume methods. New driver should use the + power management interface provided by their bus type (usually through + the struct device_driver dev_pm_ops) and set + these methods to NULL. @@ -833,6 +2385,35 @@ void intel_crt_init(struct drm_device *dev) + + @@ -853,6 +2434,42 @@ void intel_crt_init(struct drm_device *dev) Cover generic ioctls and sysfs layout here. We only need high-level info, since man pages should cover the rest. + + + + + VBlank event handling + + The DRM core exposes two vertical blank related ioctls: + + + DRM_IOCTL_WAIT_VBLANK + + + This takes a struct drm_wait_vblank structure as its argument, + and it is used to block or request a signal when a specified + vblank event occurs. + + + + + DRM_IOCTL_MODESET_CTL + + + This should be called by application level drivers before and + after mode setting, since on many devices the vertical blank + counter is reset at that time. Internally, the DRM snapshots + the last vblank count when the ioctl is called with the + _DRM_PRE_MODESET command, so that the counter won't go backwards + (which is dealt with when _DRM_POST_MODESET is used). + + + + + + + + diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile index 362520992ced54497deb8dca8b6fa4a60bd61125..9b7e4c55792803b1c053bc99026860a5ce56e88d 100644 --- a/Documentation/DocBook/media/Makefile +++ b/Documentation/DocBook/media/Makefile @@ -300,7 +300,7 @@ $(MEDIA_OBJ_DIR)/media-entities.tmpl: $(MEDIA_OBJ_DIR)/v4l2.xml @( \ for ident in $(IOCTLS) ; do \ entity=`echo $$ident | tr _ -` ; \ - id=`grep "$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \ + id=`grep "$$ident" $(MEDIA_OBJ_DIR)/vidioc-*.xml $(MEDIA_OBJ_DIR)/media-ioc-*.xml | sed -r s,"^.*/(.*).xml.*","\1",` ; \ echo "$$ident\">" \ >>$@ ; \ diff --git a/Documentation/DocBook/media/dvb/audio.xml b/Documentation/DocBook/media/dvb/audio.xml index d64386237207a9f27867fd6e9bee02620ff4c8bb..a7ea56c71a27cc5cebcfd6ea91b8d17dfa9432c4 100644 --- a/Documentation/DocBook/media/dvb/audio.xml +++ b/Documentation/DocBook/media/dvb/audio.xml @@ -1,12 +1,16 @@ DVB Audio Device The DVB audio device controls the MPEG2 audio decoder of the DVB hardware. It can be accessed through /dev/dvb/adapter0/audio0. Data types and and -ioctl definitions can be accessed by including linux/dvb/video.h in your +ioctl definitions can be accessed by including linux/dvb/audio.h in your application. Please note that some DVB cards don’t have their own MPEG decoder, which results in the omission of the audio and video device. + +These ioctls were also used by V4L2 to control MPEG decoders implemented in V4L2. The use +of these ioctls for that purpose has been made obsolete and proper V4L2 ioctls or controls +have been created to replace that functionality.
Audio Data Types @@ -558,6 +562,8 @@ role="subsection">AUDIO_SELECT_SOURCE role="subsection">AUDIO_SET_MUTE DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; with the V4L2_DEC_CMD_START_MUTE_AUDIO flag instead. This ioctl call asks the audio device to mute the stream that is currently being @@ -730,6 +736,8 @@ role="subsection">AUDIO_SET_BYPASS_MODE role="subsection">AUDIO_CHANNEL_SELECT DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +V4L2_CID_MPEG_AUDIO_DEC_PLAYBACK control instead. This ioctl call asks the Audio Device to select the requested channel if possible. @@ -772,6 +780,109 @@ role="subsection">AUDIO_CHANNEL_SELECT &return-value-dvb; +
AUDIO_BILINGUAL_CHANNEL_SELECT +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. It has been replaced by +the V4L2 V4L2_CID_MPEG_AUDIO_DEC_MULTILINGUAL_PLAYBACK control +for MPEG decoders controlled through V4L2. + +This ioctl call asks the Audio Device to select the requested channel for bilingual streams if possible. + + +SYNOPSIS + + +int ioctl(int fd, int request = + AUDIO_BILINGUAL_CHANNEL_SELECT, audio_channel_select_t); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_BILINGUAL_CHANNEL_SELECT for this + command. + + +audio_channel_select_t +ch + +Select the output format of the audio (mono left/right, + stereo). + + + +&return-value-dvb; + +
AUDIO_GET_PTS +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. If you need this functionality, +then please contact the linux-media mailing list (&v4l-ml;). + +This ioctl call asks the Audio Device to return the current PTS timestamp. + + +SYNOPSIS + + +int ioctl(int fd, int request = + AUDIO_GET_PTS, __u64 *pts); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals AUDIO_GET_PTS for this + command. + + +__u64 *pts + + +Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / ISO/IEC 13818-1. + + +The PTS should belong to the currently played +frame if possible, but may also be a value close to it +like the PTS of the last decoded frame or the last PTS +extracted by the PES parser. + + +&return-value-dvb; +
AUDIO_GET_STATUS DESCRIPTION diff --git a/Documentation/DocBook/media/dvb/ca.xml b/Documentation/DocBook/media/dvb/ca.xml index 5c4adb44b1c18a4207ac993132e823c83cac6624..85eaf4fe2931fc96cea50ba2d502a401d475c22c 100644 --- a/Documentation/DocBook/media/dvb/ca.xml +++ b/Documentation/DocBook/media/dvb/ca.xml @@ -226,4 +226,357 @@ typedef struct ca_pid {
+ +
CA_RESET +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_RESET); + + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_RESET for this command. + + +&return-value-dvb; +
+ +
CA_GET_CAP +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_GET_CAP, + ca_caps_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_GET_CAP for this command. + + +ca_caps_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_GET_SLOT_INFO +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_GET_SLOT_INFO, + ca_slot_info_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_GET_SLOT_INFO for this command. + + +ca_slot_info_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_GET_DESCR_INFO +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_GET_DESCR_INFO, + ca_descr_info_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_GET_DESCR_INFO for this command. + + +ca_descr_info_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_GET_MSG +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_GET_MSG, + ca_msg_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_GET_MSG for this command. + + +ca_msg_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_SEND_MSG +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_SEND_MSG, + ca_msg_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_SEND_MSG for this command. + + +ca_msg_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_SET_DESCR +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_SET_DESCR, + ca_descr_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_SET_DESCR for this command. + + +ca_descr_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
CA_SET_PID +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = CA_SET_PID, + ca_pid_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals CA_SET_PID for this command. + + +ca_pid_t * + + +Undocumented. + + +&return-value-dvb; +
+ diff --git a/Documentation/DocBook/media/dvb/demux.xml b/Documentation/DocBook/media/dvb/demux.xml index 37c17908aa400acd225881af1acb5383e6221442..86de89cfbd676cbeda054aba040432e25c4f68d3 100644 --- a/Documentation/DocBook/media/dvb/demux.xml +++ b/Documentation/DocBook/media/dvb/demux.xml @@ -899,4 +899,232 @@ typedef enum { Invalid stc number. - + + +
DMX_GET_PES_PIDS +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_GET_PES_PIDS, + __u16[5]); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_GET_PES_PIDS for this command. + + +__u16[5] + + +Undocumented. + + +&return-value-dvb; +
+ +
DMX_GET_CAPS +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_GET_CAPS, + dmx_caps_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_GET_CAPS for this command. + + +dmx_caps_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
DMX_SET_SOURCE +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_SET_SOURCE, + dmx_source_t *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_SET_SOURCE for this command. + + +dmx_source_t * + + +Undocumented. + + +&return-value-dvb; +
+ +
DMX_ADD_PID +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_ADD_PID, + __u16 *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_ADD_PID for this command. + + +__u16 * + + +Undocumented. + + +&return-value-dvb; +
+ +
DMX_REMOVE_PID +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = DMX_REMOVE_PID, + __u16 *); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals DMX_REMOVE_PID for this command. + + +__u16 * + + +Undocumented. + + +&return-value-dvb; +
+ + + diff --git a/Documentation/DocBook/media/dvb/dvbapi.xml b/Documentation/DocBook/media/dvb/dvbapi.xml index 2ab6ddcfc4e095dada4e2e6eb8084003096c279a..757488b24f4f2518898f13f55de57e9d708fa575 100644 --- a/Documentation/DocBook/media/dvb/dvbapi.xml +++ b/Documentation/DocBook/media/dvb/dvbapi.xml @@ -28,7 +28,7 @@ Convergence GmbH - 2009-2011 + 2009-2012 Mauro Carvalho Chehab @@ -84,7 +84,7 @@ Added ISDB-T test originally written by Patrick Boettcher LINUX DVB API -Version 5.2 +Version 5.8 &sub-intro; diff --git a/Documentation/DocBook/media/dvb/dvbproperty.xml b/Documentation/DocBook/media/dvb/dvbproperty.xml index e633c097a8d14b954975743e67816867f5b9fdaa..957e3acaae8e9c7e0cbc6ee377885c53d2b298d1 100644 --- a/Documentation/DocBook/media/dvb/dvbproperty.xml +++ b/Documentation/DocBook/media/dvb/dvbproperty.xml @@ -194,6 +194,7 @@ get/set up to 64 properties. The actual meaning of each property is described on APSK_16, APSK_32, DQPSK, + QAM_4_NR, } fe_modulation_t; @@ -265,6 +266,7 @@ typedef enum fe_code_rate { FEC_AUTO, FEC_3_5, FEC_9_10, + FEC_2_5, } fe_code_rate_t; which correspond to error correction rates of 1/2, 2/3, etc., @@ -351,7 +353,7 @@ typedef enum fe_delivery_system { SYS_ISDBC, SYS_ATSC, SYS_ATSCMH, - SYS_DMBTH, + SYS_DTMB, SYS_CMMB, SYS_DAB, SYS_DVBT2, @@ -567,28 +569,33 @@ typedef enum fe_delivery_system { <constant>DTV_ATSCMH_RS_FRAME_MODE</constant> RS frame mode. Possible values are: + typedef enum atscmh_rs_frame_mode { ATSCMH_RSFRAME_PRI_ONLY = 0, ATSCMH_RSFRAME_PRI_SEC = 1, } atscmh_rs_frame_mode_t; +
<constant>DTV_ATSCMH_RS_FRAME_ENSEMBLE</constant> RS frame ensemble. Possible values are: + typedef enum atscmh_rs_frame_ensemble { ATSCMH_RSFRAME_ENS_PRI = 0, ATSCMH_RSFRAME_ENS_SEC = 1, } atscmh_rs_frame_ensemble_t; +
<constant>DTV_ATSCMH_RS_CODE_MODE_PRI</constant> RS code mode (primary). Possible values are: + typedef enum atscmh_rs_code_mode { ATSCMH_RSCODE_211_187 = 0, @@ -596,6 +603,7 @@ typedef enum atscmh_rs_code_mode { ATSCMH_RSCODE_235_187 = 2, } atscmh_rs_code_mode_t; +
<constant>DTV_ATSCMH_RS_CODE_MODE_SEC</constant> @@ -613,23 +621,27 @@ typedef enum atscmh_rs_code_mode { <constant>DTV_ATSCMH_SCCC_BLOCK_MODE</constant> Series Concatenated Convolutional Code Block Mode. Possible values are: + typedef enum atscmh_sccc_block_mode { ATSCMH_SCCC_BLK_SEP = 0, ATSCMH_SCCC_BLK_COMB = 1, } atscmh_sccc_block_mode_t; +
<constant>DTV_ATSCMH_SCCC_CODE_MODE_A</constant> Series Concatenated Convolutional Code Rate. Possible values are: + typedef enum atscmh_sccc_code_mode { ATSCMH_SCCC_CODE_HLF = 0, ATSCMH_SCCC_CODE_QTR = 1, } atscmh_sccc_code_mode_t; +
<constant>DTV_ATSCMH_SCCC_CODE_MODE_B</constant> @@ -725,6 +737,9 @@ typedef enum fe_guard_interval { GUARD_INTERVAL_1_128, GUARD_INTERVAL_19_128, GUARD_INTERVAL_19_256, + GUARD_INTERVAL_PN420, + GUARD_INTERVAL_PN595, + GUARD_INTERVAL_PN945, } fe_guard_interval_t; @@ -733,6 +748,7 @@ typedef enum fe_guard_interval { try to find the correct guard interval (if capable) and will use TMCC to fill in the missing parameters. 2) Intervals 1/128, 19/128 and 19/256 are used only for DVB-T2 at present + 3) DTMB specifies PN420, PN595 and PN945.
<constant>DTV_TRANSMISSION_MODE</constant> @@ -749,6 +765,8 @@ typedef enum fe_transmit_mode { TRANSMISSION_MODE_1K, TRANSMISSION_MODE_16K, TRANSMISSION_MODE_32K, + TRANSMISSION_MODE_C1, + TRANSMISSION_MODE_C3780, } fe_transmit_mode_t; Notes: @@ -760,6 +778,7 @@ typedef enum fe_transmit_mode { use TMCC to fill in the missing parameters. 3) DVB-T specifies 2K and 8K as valid sizes. 4) DVB-T2 specifies 1K, 2K, 4K, 8K, 16K and 32K. + 5) DTMB specifies C1 and C3780.
<constant>DTV_HIERARCHY</constant> @@ -774,17 +793,28 @@ typedef enum fe_hierarchy { } fe_hierarchy_t;
-
- <constant>DTV_ISDBS_TS_ID</constant> - Currently unused. +
+ <constant>DTV_STREAM_ID</constant> + DVB-S2, DVB-T2 and ISDB-S support the transmission of several + streams on a single transport stream. + This property enables the DVB driver to handle substream filtering, + when supported by the hardware. + By default, substream filtering is disabled. + + For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255. + + For ISDB, the valid substream id range is from 1 to 65535. + + To disable it, you should use the special macro NO_STREAM_ID_FILTER. + + Note: any value outside the id range also disables filtering. +
-
- <constant>DTV_DVBT2_PLP_ID</constant> - DVB-T2 supports Physical Layer Pipes (PLP) to allow transmission of - many data types via a single multiplex. The API will soon support this - at which point this section will be expanded. +
+ <constant>DTV_DVBT2_PLP_ID_LEGACY</constant> + Obsolete, replaced with DTV_STREAM_ID.
-
+
<constant>DTV_ENUM_DELSYS</constant> A Multi standard frontend needs to advertise the delivery systems provided. Applications need to enumerate the provided delivery systems, before using @@ -796,6 +826,29 @@ typedef enum fe_hierarchy { FE_GET_INFO. In the case of a legacy frontend, the result is just the same as with FE_GET_INFO, but in a more structured format
+
+ <constant>DTV_INTERLEAVING</constant> + Interleaving mode + +enum fe_interleaving { + INTERLEAVING_NONE, + INTERLEAVING_AUTO, + INTERLEAVING_240, + INTERLEAVING_720, +}; + +
+
+ <constant>DTV_LNA</constant> + Low-noise amplifier. + Hardware might offer controllable LNA which can be set manually + using that parameter. Usually LNA could be found only from + terrestrial devices if at all. + Possible values: 0, 1, LNA_AUTO + 0, LNA off + 1, LNA on + use the special macro LNA_AUTO to set LNA auto +
Properties used on terrestrial delivery systems @@ -816,6 +869,7 @@ typedef enum fe_hierarchy { DTV_GUARD_INTERVAL DTV_TRANSMISSION_MODE DTV_HIERARCHY + DTV_LNA
@@ -838,7 +892,8 @@ typedef enum fe_hierarchy { DTV_GUARD_INTERVAL DTV_TRANSMISSION_MODE DTV_HIERARCHY - DTV_DVBT2_PLP_ID + DTV_STREAM_ID + DTV_LNA
@@ -925,13 +980,32 @@ typedef enum fe_hierarchy { DTV_ATSCMH_PRC DTV_ATSCMH_RS_FRAME_MODE DTV_ATSCMH_RS_FRAME_ENSEMBLE - DTV_ATSCMH_CODE_MODE_PRI - DTV_ATSCMH_CODE_MODE_SEC + DTV_ATSCMH_RS_CODE_MODE_PRI + DTV_ATSCMH_RS_CODE_MODE_SEC DTV_ATSCMH_SCCC_BLOCK_MODE - DTV_ATSCMH_SCCC_CODE_MODE_A - DTV_ATSCMH_SCCC_CODE_MODE_B - DTV_ATSCMH_SCCC_CODE_MODE_C - DTV_ATSCMH_SCCC_CODE_MODE_D + DTV_ATSCMH_SCCC_CODE_MODE_A + DTV_ATSCMH_SCCC_CODE_MODE_B + DTV_ATSCMH_SCCC_CODE_MODE_C + DTV_ATSCMH_SCCC_CODE_MODE_D + +
+
+ DTMB delivery system + The following parameters are valid for DTMB: + + DTV_API_VERSION + DTV_DELIVERY_SYSTEM + DTV_TUNE + DTV_CLEAR + DTV_FREQUENCY + DTV_MODULATION + DTV_BANDWIDTH_HZ + DTV_INVERSION + DTV_INNER_FEC + DTV_GUARD_INTERVAL + DTV_TRANSMISSION_MODE + DTV_INTERLEAVING + DTV_LNA
@@ -952,6 +1026,7 @@ typedef enum fe_hierarchy { DTV_INVERSION DTV_SYMBOL_RATE DTV_INNER_FEC + DTV_LNA
@@ -966,6 +1041,7 @@ typedef enum fe_hierarchy { DTV_FREQUENCY DTV_MODULATION DTV_INVERSION + DTV_LNA
@@ -999,6 +1075,7 @@ typedef enum fe_hierarchy { DTV_MODULATION DTV_PILOT DTV_ROLLOFF + DTV_STREAM_ID
@@ -1021,7 +1098,7 @@ typedef enum fe_hierarchy { DTV_SYMBOL_RATE DTV_INNER_FEC DTV_VOLTAGE - DTV_ISDBS_TS_ID + DTV_STREAM_ID
diff --git a/Documentation/DocBook/media/dvb/frontend.xml b/Documentation/DocBook/media/dvb/frontend.xml index aeaed59d0f1f5d3d9baeff4af53eb803a7b50355..426c2526a4546a5fcf8ec27561d14482fa91593e 100644 --- a/Documentation/DocBook/media/dvb/frontend.xml +++ b/Documentation/DocBook/media/dvb/frontend.xml @@ -66,7 +66,7 @@ supported via the new FE_GET_PROPERTY/FE_GET The usage of this field is deprecated, as it doesn't report all supported standards, and will provide an incomplete information for frontends that support multiple delivery systems. -Please use DTV_ENUM_DELSYS instead. +Please use DTV_ENUM_DELSYS instead.
@@ -101,6 +101,7 @@ a specific frontend type. FE_CAN_8VSB = 0x200000, FE_CAN_16VSB = 0x400000, FE_HAS_EXTENDED_CAPS = 0x800000, + FE_CAN_MULTISTREAM = 0x4000000, FE_CAN_TURBO_FEC = 0x8000000, FE_CAN_2G_MODULATION = 0x10000000, FE_NEEDS_BENDING = 0x20000000, @@ -207,18 +208,44 @@ spec. Several functions of the frontend device use the fe_status data type defined by - typedef enum fe_status { - FE_HAS_SIGNAL = 0x01, /⋆ found something above the noise level ⋆/ - FE_HAS_CARRIER = 0x02, /⋆ found a DVB signal ⋆/ - FE_HAS_VITERBI = 0x04, /⋆ FEC is stable ⋆/ - FE_HAS_SYNC = 0x08, /⋆ found sync bytes ⋆/ - FE_HAS_LOCK = 0x10, /⋆ everything's working... ⋆/ - FE_TIMEDOUT = 0x20, /⋆ no lock within the last ~2 seconds ⋆/ - FE_REINIT = 0x40 /⋆ frontend was reinitialized, ⋆/ - } fe_status_t; /⋆ application is recommned to reset ⋆/ +typedef enum fe_status { + FE_HAS_SIGNAL = 0x01, + FE_HAS_CARRIER = 0x02, + FE_HAS_VITERBI = 0x04, + FE_HAS_SYNC = 0x08, + FE_HAS_LOCK = 0x10, + FE_TIMEDOUT = 0x20, + FE_REINIT = 0x40, +} fe_status_t; -to indicate the current state and/or state changes of the frontend hardware. - +to indicate the current state and/or state changes of the frontend hardware: + + + + +FE_HAS_SIGNAL +The frontend has found something above the noise level + +FE_HAS_CARRIER +The frontend has found a DVB signal + +FE_HAS_VITERBI +The frontend FEC code is stable + +FE_HAS_SYNC +Syncronization bytes was found + +FE_HAS_LOCK +The DVB were locked and everything is working + +FE_TIMEDOUT +no lock within the last about 2 seconds + +FE_REINIT +The frontend was reinitialized, application is +recommended to reset DiSEqC, tone and parameters + +
@@ -238,7 +265,7 @@ and to add newer delivery systems. FE_GET_PROPERTY/FE_SET_PROPERTY instead, in order to be able to support the newer System Delivery like DVB-S2, DVB-T2, DVB-C2, ISDB, etc. -All kinds of parameters are combined as an union in the FrontendParameters structure: +All kinds of parameters are combined as an union in the FrontendParameters structure: struct dvb_frontend_parameters { uint32_t frequency; /⋆ (absolute) frequency in Hz for QAM/OFDM ⋆/ @@ -251,12 +278,13 @@ struct dvb_frontend_parameters { struct dvb_vsb_parameters vsb; } u; }; - + In the case of QPSK frontends the frequency field specifies the intermediate frequency, i.e. the offset which is effectively added to the local oscillator frequency (LOF) of the LNB. The intermediate frequency has to be specified in units of kHz. For QAM and OFDM frontends the frequency specifies the absolute frequency and is given in Hz. +
QPSK parameters For satellite QPSK frontends you have to use the dvb_qpsk_parameters structure: @@ -321,8 +349,8 @@ itself.
frontend code rate The possible values for the fec_inner field used on -struct dvb_qpsk_parameters and -struct dvb_qam_parameters are: +struct dvb_qpsk_parameters and +struct dvb_qam_parameters are: typedef enum fe_code_rate { @@ -347,9 +375,9 @@ detection.
frontend modulation type for QAM, OFDM and VSB For cable and terrestrial frontends, e. g. for -struct dvb_qpsk_parameters, -struct dvb_qam_parameters and -struct dvb_qam_parameters, +struct dvb_qpsk_parameters, +struct dvb_qam_parameters and +struct dvb_qam_parameters, it needs to specify the quadrature modulation mode which can be one of the following: @@ -370,8 +398,8 @@ it needs to specify the quadrature modulation mode which can be one of the follo } fe_modulation_t;
-Finally, there are several more parameters for OFDM: - +
+More OFDM parameters
Number of carriers per channel @@ -427,6 +455,7 @@ typedef enum fe_hierarchy { } fe_hierarchy_t;
+
diff --git a/Documentation/DocBook/media/dvb/intro.xml b/Documentation/DocBook/media/dvb/intro.xml index 170064a3dc8f4b3db90bb348331ec777074f84c2..2048b53d19b9e81b2a7e159dbde0ce63c1b51f98 100644 --- a/Documentation/DocBook/media/dvb/intro.xml +++ b/Documentation/DocBook/media/dvb/intro.xml @@ -205,7 +205,7 @@ a partial path like: additional include file linux/dvb/version.h exists, which defines the constant DVB_API_VERSION. This document -describes DVB_API_VERSION 5.4. +describes DVB_API_VERSION 5.8.
diff --git a/Documentation/DocBook/media/dvb/kdapi.xml b/Documentation/DocBook/media/dvb/kdapi.xml index 6c67481eaa4b8f20292d5ab9d2cdcdc4398d9f3f..6c11ec52cbeef013839fc3bf8a27c0029c56427a 100644 --- a/Documentation/DocBook/media/dvb/kdapi.xml +++ b/Documentation/DocBook/media/dvb/kdapi.xml @@ -2,7 +2,7 @@ The kernel demux API defines a driver-internal interface for registering low-level, hardware specific driver to a hardware independent demux layer. It is only of interest for DVB device driver writers. The header file for this API is named demux.h and located in -drivers/media/dvb/dvb-core. +drivers/media/dvb-core. Maintainer note: This section must be reviewed. It is probably out of date. diff --git a/Documentation/DocBook/media/dvb/net.xml b/Documentation/DocBook/media/dvb/net.xml index 67d37e5ce5979c1a8ffb160bc0993b7f264fc8ec..a193e86941b55eb85ab45beb6850c90560d7c0a7 100644 --- a/Documentation/DocBook/media/dvb/net.xml +++ b/Documentation/DocBook/media/dvb/net.xml @@ -26,4 +26,131 @@ struct dvb_net_if { DVB net Function Calls To be written… + +
NET_ADD_IF +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = NET_ADD_IF, + struct dvb_net_if *if); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals NET_ADD_IF for this command. + + +struct dvb_net_if *if + + +Undocumented. + + +&return-value-dvb; +
+ +
NET_REMOVE_IF +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = NET_REMOVE_IF); + + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals NET_REMOVE_IF for this command. + + +&return-value-dvb; +
+ +
NET_GET_IF +DESCRIPTION + + +This ioctl is undocumented. Documentation is welcome. + + +SYNOPSIS + + +int ioctl(fd, int request = NET_GET_IF, + struct dvb_net_if *if); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals NET_GET_IF for this command. + + +struct dvb_net_if *if + + +Undocumented. + + +&return-value-dvb; +
diff --git a/Documentation/DocBook/media/dvb/video.xml b/Documentation/DocBook/media/dvb/video.xml index 25fb823226b42231f7333212c8256fd8d44a888b..3ea1ca7e785ef2b271c848442a54177b86b0245d 100644 --- a/Documentation/DocBook/media/dvb/video.xml +++ b/Documentation/DocBook/media/dvb/video.xml @@ -15,6 +15,10 @@ the audio and video device as well as the video4linux device. The ioctls that deal with SPUs (sub picture units) and navigation packets are only supported on some MPEG decoders made for DVD playback. + +These ioctls were also used by V4L2 to control MPEG decoders implemented in V4L2. The use +of these ioctls for that purpose has been made obsolete and proper V4L2 ioctls or controls +have been created to replace that functionality.
Video Data Types @@ -55,7 +59,7 @@ typedef enum {
-video stream source +video_stream_source_t The video stream source is set through the VIDEO_SELECT_SOURCE call and can take the following values, depending on whether we are replaying from an internal (demuxer) or external (user write) source. @@ -76,7 +80,7 @@ call.
-video play state +video_play_state_t The following values can be returned by the VIDEO_GET_STATUS call representing the state of video playback. @@ -90,9 +94,9 @@ typedef enum {
+struct video_command The structure must be zeroed before use by the application This ensures it can be extended safely in the future. -struct video-command struct video_command { __u32 cmd; @@ -121,7 +125,7 @@ struct video_command {
-struct video_size-t +video_size_t typedef struct { int w; @@ -217,7 +221,7 @@ bits set according to the hardwares capabilities.
-video system +video_system_t A call to VIDEO_SET_SYSTEM sets the desired video system for TV output. The following system types can be set: @@ -263,7 +267,7 @@ call expects the following format for that information:
-video SPU +struct video_spu Calling VIDEO_SET_SPU deactivates or activates SPU decoding, according to the following format: @@ -277,12 +281,12 @@ following format:
-video SPU palette +struct video_spu_palette The following structure is used to set the SPU palette by calling VIDEO_SPU_PALETTE: typedef - struct video_spu_palette{ + struct video_spu_palette { int length; uint8_t ⋆palette; } video_spu_palette_t; @@ -290,13 +294,13 @@ following format:
-video NAVI pack +struct video_navi_pack In order to get the navigational data the following structure has to be passed to the ioctl VIDEO_GET_NAVI: typedef - struct video_navi_pack{ + struct video_navi_pack { int length; /⋆ 0 ... 1024 ⋆/ uint8_t data[1024]; } video_navi_pack_t; @@ -305,7 +309,7 @@ VIDEO_GET_NAVI:
-video attributes +video_attributes_t The following attributes can be set by a call to VIDEO_SET_ATTRIBUTES: @@ -541,6 +545,8 @@ VIDEO_GET_NAVI: role="subsection">VIDEO_STOP DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; instead. This ioctl call asks the Video Device to stop playing the current stream. @@ -598,6 +604,8 @@ role="subsection">VIDEO_STOP role="subsection">VIDEO_PLAY DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; instead. This ioctl call asks the Video Device to start playing a video stream from the @@ -634,6 +642,8 @@ role="subsection">VIDEO_PLAY role="subsection">VIDEO_FREEZE DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; instead. This ioctl call suspends the live video stream being played. Decoding @@ -674,6 +684,8 @@ role="subsection">VIDEO_FREEZE role="subsection">VIDEO_CONTINUE DESCRIPTION +This ioctl is for DVB devices only. To control a V4L2 decoder use the V4L2 +&VIDIOC-DECODER-CMD; instead. This ioctl call restarts decoding and playing processes of the video stream @@ -710,6 +722,9 @@ role="subsection">VIDEO_CONTINUE role="subsection">VIDEO_SELECT_SOURCE DESCRIPTION +This ioctl is for DVB devices only. This ioctl was also supported by the +V4L2 ivtv driver, but that has been replaced by the ivtv-specific +IVTV_IOC_PASSTHROUGH_MODE ioctl. This ioctl call informs the video device which source shall be used for the input @@ -845,10 +860,160 @@ role="subsection">VIDEO_GET_STATUS &return-value-dvb; +
VIDEO_GET_FRAME_COUNT +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this +ioctl has been replaced by the V4L2_CID_MPEG_VIDEO_DEC_FRAME control. + +This ioctl call asks the Video Device to return the number of displayed frames +since the decoder was started. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_GET_FRAME_COUNT, __u64 *pts); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_FRAME_COUNT for this + command. + + +__u64 *pts + + +Returns the number of frames displayed since the decoder was started. + + + +&return-value-dvb; + +
VIDEO_GET_PTS +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this +ioctl has been replaced by the V4L2_CID_MPEG_VIDEO_DEC_PTS control. + +This ioctl call asks the Video Device to return the current PTS timestamp. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_GET_PTS, __u64 *pts); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_PTS for this + command. + + +__u64 *pts + + +Returns the 33-bit timestamp as defined in ITU T-REC-H.222.0 / ISO/IEC 13818-1. + + +The PTS should belong to the currently played +frame if possible, but may also be a value close to it +like the PTS of the last decoded frame or the last PTS +extracted by the PES parser. + + +&return-value-dvb; + +
VIDEO_GET_FRAME_RATE +DESCRIPTION + + +This ioctl call asks the Video Device to return the current framerate. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_GET_FRAME_RATE, unsigned int *rate); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_FRAME_RATE for this + command. + + +unsigned int *rate + + +Returns the framerate in number of frames per 1000 seconds. + + + +&return-value-dvb; +
VIDEO_GET_EVENT DESCRIPTION +This ioctl is for DVB devices only. To get events from a V4L2 decoder use the V4L2 +&VIDIOC-DQEVENT; ioctl instead. This ioctl call returns an event of type video_event if available. If an event is @@ -914,6 +1079,152 @@ role="subsection">VIDEO_GET_EVENT +
VIDEO_COMMAND +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this +ioctl has been replaced by the &VIDIOC-DECODER-CMD; ioctl. + +This ioctl commands the decoder. The video_command struct +is a subset of the v4l2_decoder_cmd struct, so refer to the +&VIDIOC-DECODER-CMD; documentation for more information. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_COMMAND, struct video_command *cmd); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_COMMAND for this + command. + + +struct video_command *cmd + + +Commands the decoder. + + + +&return-value-dvb; + +
VIDEO_TRY_COMMAND +DESCRIPTION + +This ioctl is obsolete. Do not use in new drivers. For V4L2 decoders this +ioctl has been replaced by the &VIDIOC-TRY-DECODER-CMD; ioctl. + +This ioctl tries a decoder command. The video_command struct +is a subset of the v4l2_decoder_cmd struct, so refer to the +&VIDIOC-TRY-DECODER-CMD; documentation for more information. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_TRY_COMMAND, struct video_command *cmd); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_TRY_COMMAND for this + command. + + +struct video_command *cmd + + +Try a decoder command. + + + +&return-value-dvb; + +
VIDEO_GET_SIZE +DESCRIPTION + + +This ioctl returns the size and aspect ratio. + + +SYNOPSIS + + +int ioctl(int fd, int request = + VIDEO_GET_SIZE, video_size_t *size); + + +PARAMETERS + + +int fd + +File descriptor returned by a previous call to open(). + + +int request + +Equals VIDEO_GET_SIZE for this + command. + + +video_size_t *size + + +Returns the size and aspect ratio. + + + +&return-value-dvb; +
VIDEO_SET_DISPLAY_FORMAT DESCRIPTION diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml index 1078e45f189f0630c6c6ea50f74b3764dc1cea43..d2eb79e41a011a6e904ba5f81da083cec8e3b520 100644 --- a/Documentation/DocBook/media/v4l/biblio.xml +++ b/Documentation/DocBook/media/v4l/biblio.xml @@ -178,23 +178,23 @@ Signal - NTSC for Studio Applications" 1125-Line High-Definition Production" - - EN 50067 + + IEC 62106 - European Committee for Electrotechnical Standardization -(http://www.cenelec.eu) + International Electrotechnical Commission +(http://www.iec.ch) Specification of the radio data system (RDS) for VHF/FM sound broadcasting in the frequency range from 87,5 to 108,0 MHz - NRSC-4 + NRSC-4-B National Radio Systems Committee (http://www.nrscstandards.org) - NRSC-4: United States RBDS Standard + NRSC-4-B: United States RBDS Standard @@ -226,4 +226,44 @@ in the frequency range from 87,5 to 108,0 MHz VESA and Industry Standards and Guidelines for Computer Display Monitor Timing (DMT) + + EDID + + Video Electronics Standards Association +(http://www.vesa.org) + + VESA Enhanced Extended Display Identification Data Standard + Release A, Revision 2 + + + + HDCP + + Digital Content Protection LLC +(http://www.digital-cp.com) + + High-bandwidth Digital Content Protection System + Revision 1.3 + + + + HDMI + + HDMI Licensing LLC +(http://www.hdmi.org) + + High-Definition Multimedia Interface + Specification Version 1.4a + + + + DP + + Video Electronics Standards Association +(http://www.vesa.org) + + VESA DisplayPort Standard + Version 1, Revision 2 + + diff --git a/Documentation/DocBook/media/v4l/common.xml b/Documentation/DocBook/media/v4l/common.xml index b91d25313b631eb25fec06bf42877131af31c61e..73c6847436c99f7c7ca5fccc3f6b1c2780881afd 100644 --- a/Documentation/DocBook/media/v4l/common.xml +++ b/Documentation/DocBook/media/v4l/common.xml @@ -564,7 +564,7 @@ automatically. To query and select the standard used by the current video input or output applications call the &VIDIOC-G-STD; and &VIDIOC-S-STD; ioctl, respectively. The received -standard can be sensed with the &VIDIOC-QUERYSTD; ioctl. Note parameter of all these ioctls is a pointer to a &v4l2-std-id; type (a standard set), not an index into the standard enumeration. +standard can be sensed with the &VIDIOC-QUERYSTD; ioctl. Note that the parameter of all these ioctls is a pointer to a &v4l2-std-id; type (a standard set), not an index into the standard enumeration. An alternative to the current scheme is to use pointers to indices as arguments of VIDIOC_G_STD and VIDIOC_S_STD, the &v4l2-input; and @@ -588,30 +588,28 @@ switch to a standard by &v4l2-std-id;. Drivers must implement all video standard ioctls when the device has one or more video inputs or outputs. - Special rules apply to USB cameras where the notion of video -standards makes little sense. More generally any capture device, -output devices accordingly, which is + Special rules apply to devices such as USB cameras where the notion of video +standards makes little sense. More generally for any capture or output device +which is: incapable of capturing fields or frames at the nominal rate of the video standard, or - where timestamps refer -to the instant the field or frame was received by the driver, not the -capture time, or - - - where sequence numbers -refer to the frames received by the driver, not the captured -frames. + that does not support the video standard formats at all. Here the driver shall set the std field of &v4l2-input; and &v4l2-output; -to zero, the VIDIOC_G_STD, +to zero and the VIDIOC_G_STD, VIDIOC_S_STD, VIDIOC_QUERYSTD and VIDIOC_ENUMSTD ioctls shall return the -&EINVAL;. +&ENOTTY;. + See for a rationale. + Applications can make use of the and + flags to determine whether the video standard ioctls +are available for the device. +&ENOTTY;. See for a rationale. Probably even USB cameras follow some well known video standard. It might have been better to explicitly indicate elsewhere if a device cannot live @@ -626,9 +624,9 @@ up to normal expectations, instead of this exception. &v4l2-standard; standard; if (-1 == ioctl (fd, &VIDIOC-G-STD;, &std_id)) { - /* Note when VIDIOC_ENUMSTD always returns EINVAL this + /* Note when VIDIOC_ENUMSTD always returns ENOTTY this is no video device or it falls under the USB exception, - and VIDIOC_G_STD returning EINVAL is no error. */ + and VIDIOC_G_STD returning ENOTTY is no error. */ perror ("VIDIOC_G_STD"); exit (EXIT_FAILURE); diff --git a/Documentation/DocBook/media/v4l/compat.xml b/Documentation/DocBook/media/v4l/compat.xml index faa0fd14666a54bc2688ca176c9dee531cc5eccf..4fdf6b562d1cedb819c258f99820edfa4fafc7b3 100644 --- a/Documentation/DocBook/media/v4l/compat.xml +++ b/Documentation/DocBook/media/v4l/compat.xml @@ -1476,7 +1476,7 @@ follows. V4L2_BUF_TYPE_PRIVATE_BASE - V4L2_BUF_TYPE_PRIVATE + V4L2_BUF_TYPE_PRIVATE (but this is deprecated) @@ -2468,21 +2468,9 @@ that used it. It was originally scheduled for removal in 2.6.35. reserved2 and removed V4L2_BUF_FLAG_INPUT. - -
- -
- V4L2 in Linux 3.6 - Added V4L2_CAP_VIDEO_M2M and V4L2_CAP_VIDEO_M2M_MPLANE capabilities. - -
- -
- V4L2 in Linux 3.6 - Added support for frequency band enumerations: &VIDIOC-ENUM-FREQ-BANDS;. @@ -2567,29 +2555,6 @@ and may change in the future. Video Output Overlay (OSD) Interface, . - - V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY, - &v4l2-buf-type;, . - - - V4L2_CAP_VIDEO_OUTPUT_OVERLAY, -&VIDIOC-QUERYCAP; ioctl, . - - - &VIDIOC-ENUM-FRAMESIZES; and -&VIDIOC-ENUM-FRAMEINTERVALS; ioctls. - - - &VIDIOC-G-ENC-INDEX; ioctl. - - - &VIDIOC-ENCODER-CMD; and &VIDIOC-TRY-ENCODER-CMD; -ioctls. - - - &VIDIOC-DECODER-CMD; and &VIDIOC-TRY-DECODER-CMD; -ioctls. - &VIDIOC-DBG-G-REGISTER; and &VIDIOC-DBG-S-REGISTER; ioctls. @@ -2615,11 +2580,11 @@ ioctls. and &VIDIOC-SUBDEV-S-SELECTION; ioctls. - - V4L2_CID_AUTO_FOCUS_AREA control. + Support for frequency band enumeration: &VIDIOC-ENUM-FREQ-BANDS; ioctl. - Support for frequency band enumeration: &VIDIOC-ENUM-FREQ-BANDS; ioctl. + Vendor and device specific media bus pixel formats. + .
diff --git a/Documentation/DocBook/media/v4l/controls.xml b/Documentation/DocBook/media/v4l/controls.xml index b0964fb4e8348853619efd3296b7821d4e6b6803..7fe5be1d3bbb14f58eb5ea60f32fa43b17bda894 100644 --- a/Documentation/DocBook/media/v4l/controls.xml +++ b/Documentation/DocBook/media/v4l/controls.xml @@ -1586,7 +1586,6 @@ frame counter of the frame that is currently displayed (decoded). This value is the decoder is started. - V4L2_CID_MPEG_VIDEO_DECODER_SLICE_INTERFACE  @@ -2269,6 +2268,14 @@ encoder or editing process may produce.". Applicable to the MPEG1, MPEG2, MPEG4 encoders. + + + V4L2_CID_MPEG_VIDEO_VBV_DELAY  + integer + Sets the initial delay in milliseconds for +VBV buffer control. + + V4L2_CID_MPEG_VIDEO_H264_CPB_SIZE  @@ -2334,6 +2341,265 @@ Applicable to the MPEG4 decoder. vop_time_increment value for MPEG4. Applicable to the MPEG4 encoder. + + + V4L2_CID_MPEG_VIDEO_H264_SEI_FRAME_PACKING  + boolean + + Enable generation of frame packing supplemental enhancement information in the encoded bitstream. +The frame packing SEI message contains the arrangement of L and R planes for 3D viewing. Applicable to the H264 encoder. + + + + + V4L2_CID_MPEG_VIDEO_H264_SEI_FP_CURRENT_FRAME_0  + boolean + + Sets current frame as frame0 in frame packing SEI. +Applicable to the H264 encoder. + + + + + V4L2_CID_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE  + enum v4l2_mpeg_video_h264_sei_fp_arrangement_type + + Frame packing arrangement type for H264 SEI. +Applicable to the H264 encoder. +Possible values are: + + + + + + V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_CHEKERBOARD  + Pixels are alternatively from L and R. + + + V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_COLUMN  + L and R are interlaced by column. + + + V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_ROW  + L and R are interlaced by row. + + + V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_SIDE_BY_SIDE  + L is on the left, R on the right. + + + V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TOP_BOTTOM  + L is on top, R on bottom. + + + V4L2_MPEG_VIDEO_H264_SEI_FP_ARRANGEMENT_TYPE_TEMPORAL  + One view per frame. + + + + + + + + V4L2_CID_MPEG_VIDEO_H264_FMO  + boolean + + Enables flexible macroblock ordering in the encoded bitstream. It is a technique +used for restructuring the ordering of macroblocks in pictures. Applicable to the H264 encoder. + + + + + V4L2_CID_MPEG_VIDEO_H264_FMO_MAP_TYPE  + enum v4l2_mpeg_video_h264_fmo_map_type + + When using FMO, the map type divides the image in different scan patterns of macroblocks. +Applicable to the H264 encoder. +Possible values are: + + + + + + V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_INTERLEAVED_SLICES  + Slices are interleaved one after other with macroblocks in run length order. + + + V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_SCATTERED_SLICES  + Scatters the macroblocks based on a mathematical function known to both encoder and decoder. + + + V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_FOREGROUND_WITH_LEFT_OVER  + Macroblocks arranged in rectangular areas or regions of interest. + + + V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_BOX_OUT  + Slice groups grow in a cyclic way from centre to outwards. + + + V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_RASTER_SCAN  + Slice groups grow in raster scan pattern from left to right. + + + V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_WIPE_SCAN  + Slice groups grow in wipe scan pattern from top to bottom. + + + V4L2_MPEG_VIDEO_H264_FMO_MAP_TYPE_EXPLICIT  + User defined map type. + + + + + + + + V4L2_CID_MPEG_VIDEO_H264_FMO_SLICE_GROUP  + integer + + Number of slice groups in FMO. +Applicable to the H264 encoder. + + + + + V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_DIRECTION  + enum v4l2_mpeg_video_h264_fmo_change_dir + + Specifies a direction of the slice group change for raster and wipe maps. +Applicable to the H264 encoder. +Possible values are: + + + + + + V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_RIGHT  + Raster scan or wipe right. + + + V4L2_MPEG_VIDEO_H264_FMO_CHANGE_DIR_LEFT  + Reverse raster scan or wipe left. + + + + + + + + V4L2_CID_MPEG_VIDEO_H264_FMO_CHANGE_RATE  + integer + + Specifies the size of the first slice group for raster and wipe map. +Applicable to the H264 encoder. + + + + + V4L2_CID_MPEG_VIDEO_H264_FMO_RUN_LENGTH  + integer + + Specifies the number of consecutive macroblocks for the interleaved map. +Applicable to the H264 encoder. + + + + + V4L2_CID_MPEG_VIDEO_H264_ASO  + boolean + + Enables arbitrary slice ordering in encoded bitstream. +Applicable to the H264 encoder. + + + + + V4L2_CID_MPEG_VIDEO_H264_ASO_SLICE_ORDER  + integer + Specifies the slice order in ASO. Applicable to the H264 encoder. +The supplied 32-bit integer is interpreted as follows (bit +0 = least significant bit): + + + + + + Bit 0:15 + Slice ID + + + Bit 16:32 + Slice position or order + + + + + + + + V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING  + boolean + + Enables H264 hierarchical coding. +Applicable to the H264 encoder. + + + + + V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_TYPE  + enum v4l2_mpeg_video_h264_hierarchical_coding_type + + Specifies the hierarchical coding type. +Applicable to the H264 encoder. +Possible values are: + + + + + + V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_B  + Hierarchical B coding. + + + V4L2_MPEG_VIDEO_H264_HIERARCHICAL_CODING_P  + Hierarchical P coding. + + + + + + + + V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER  + integer + + Specifies the number of hierarchical coding layers. +Applicable to the H264 encoder. + + + + + V4L2_CID_MPEG_VIDEO_H264_HIERARCHICAL_CODING_LAYER_QP  + integer + Specifies a user defined QP for each layer. Applicable to the H264 encoder. +The supplied 32-bit integer is interpreted as follows (bit +0 = least significant bit): + + + + + + Bit 0:15 + QP value + + + Bit 16:32 + Layer number + + + + + @@ -3505,7 +3771,7 @@ This encodes up to 31 pre-defined programme types. Sets the Programme Service name (PS_NAME) for transmission. It is intended for static display on a receiver. It is the primary aid to listeners in programme service -identification and selection. In Annex E of , the RDS specification, +identification and selection. In Annex E of , the RDS specification, there is a full description of the correct character encoding for Programme Service name strings. Also from RDS specification, PS is usually a single eight character text. However, it is also possible to find receivers which can scroll strings sized as 8 x N characters. So, this control must be configured @@ -3519,7 +3785,7 @@ with steps of 8 characters. The result is it must always contain a string with s what is being broadcasted. RDS Radio Text can be applied when broadcaster wishes to transmit longer PS names, programme-related information or any other text. In these cases, RadioText should be used in addition to V4L2_CID_RDS_TX_PS_NAME. The encoding for Radio Text strings is also fully described -in Annex E of . The length of Radio Text strings depends on which RDS Block is being +in Annex E of . The length of Radio Text strings depends on which RDS Block is being used to transmit it, either 32 (2A block) or 64 (2B block). However, it is also possible to find receivers which can scroll strings sized as 32 x N or 64 x N characters. So, this control must be configured with steps of 32 or 64 characters. The result is it must always contain a string with size multiple of 32 or 64. @@ -3650,7 +3916,7 @@ manually or automatically if set to zero. Unit, range and step are driver-specif For more details about RDS specification, refer to - document, from CENELEC. + document, from CENELEC.
@@ -3717,232 +3983,231 @@ interface and may change in the future. use case involving camera or individually. -
+ + Flash Control IDs + + + + + + + + + + + ID + Type + Description + + + + + + V4L2_CID_FLASH_CLASS + class + + + The FLASH class descriptor. + + + V4L2_CID_FLASH_LED_MODE + menu + + + Defines the mode of the flash LED, + the high-power white LED attached to the flash controller. + Setting this control may not be possible in presence of + some faults. See V4L2_CID_FLASH_FAULT. + + + + + + V4L2_FLASH_LED_MODE_NONE + Off. + + + V4L2_FLASH_LED_MODE_FLASH + Flash mode. + + + V4L2_FLASH_LED_MODE_TORCH + Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY. + + + + + + V4L2_CID_FLASH_STROBE_SOURCE + menu + + Defines the source of the flash LED + strobe. + + + + + + V4L2_FLASH_STROBE_SOURCE_SOFTWARE + The flash strobe is triggered by using + the V4L2_CID_FLASH_STROBE control. + + + V4L2_FLASH_STROBE_SOURCE_EXTERNAL + The flash strobe is triggered by an + external source. Typically this is a sensor, + which makes it possible to synchronises the + flash strobe start to exposure start. + + + + + + V4L2_CID_FLASH_STROBE + button + + + Strobe flash. Valid when + V4L2_CID_FLASH_LED_MODE is set to + V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE + is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this + control may not be possible in presence of some faults. + See V4L2_CID_FLASH_FAULT. + + + V4L2_CID_FLASH_STROBE_STOP + button + + Stop flash strobe immediately. + + + V4L2_CID_FLASH_STROBE_STATUS + boolean + + + Strobe status: whether the flash + is strobing at the moment or not. This is a read-only + control. + + + V4L2_CID_FLASH_TIMEOUT + integer + + + Hardware timeout for flash. The + flash strobe is stopped after this period of time has + passed from the start of the strobe. + + + V4L2_CID_FLASH_INTENSITY + integer + + + Intensity of the flash strobe when + the flash LED is in flash mode + (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps + (mA) if possible. + + + V4L2_CID_FLASH_TORCH_INTENSITY + integer + + + Intensity of the flash LED in + torch mode (V4L2_FLASH_LED_MODE_TORCH). The unit should be + milliamps (mA) if possible. Setting this control may not + be possible in presence of some faults. See + V4L2_CID_FLASH_FAULT. + + + V4L2_CID_FLASH_INDICATOR_INTENSITY + integer + + + Intensity of the indicator LED. + The indicator LED may be fully independent of the flash + LED. The unit should be microamps (uA) if possible. + + + V4L2_CID_FLASH_FAULT + bitmask + + + Faults related to the flash. The + faults tell about specific problems in the flash chip + itself or the LEDs attached to it. Faults may prevent + further use of some of the flash controls. In particular, + V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE + if the fault affects the flash LED. Exactly which faults + have such an effect is chip dependent. Reading the faults + resets the control and returns the chip to a usable state + if possible. + + + + + + V4L2_FLASH_FAULT_OVER_VOLTAGE + Flash controller voltage to the flash LED + has exceeded the limit specific to the flash + controller. + + + V4L2_FLASH_FAULT_TIMEOUT + The flash strobe was still on when + the timeout set by the user --- + V4L2_CID_FLASH_TIMEOUT control --- has expired. + Not all flash controllers may set this in all + such conditions. + + + V4L2_FLASH_FAULT_OVER_TEMPERATURE + The flash controller has overheated. + + + V4L2_FLASH_FAULT_SHORT_CIRCUIT + The short circuit protection of the flash + controller has been triggered. + + + V4L2_FLASH_FAULT_OVER_CURRENT + Current in the LED power supply has exceeded the limit + specific to the flash controller. + + + V4L2_FLASH_FAULT_INDICATOR + The flash controller has detected a short or open + circuit condition on the indicator LED. + + + + + + V4L2_CID_FLASH_CHARGE + boolean + + Enable or disable charging of the xenon + flash capacitor. + + + V4L2_CID_FLASH_READY + boolean + + + Is the flash ready to strobe? + Xenon flashes require their capacitors charged before + strobing. LED flashes often require a cooldown period + after strobe during which another strobe will not be + possible. This is a read-only control. + + + + +
+ - - - Flash Control IDs - - - - - - - - - - - ID - Type - Description - - - - - - V4L2_CID_FLASH_CLASS - class - - - The FLASH class descriptor. - - - V4L2_CID_FLASH_LED_MODE - menu - - - Defines the mode of the flash LED, - the high-power white LED attached to the flash controller. - Setting this control may not be possible in presence of - some faults. See V4L2_CID_FLASH_FAULT. - - - - - - V4L2_FLASH_LED_MODE_NONE - Off. - - - V4L2_FLASH_LED_MODE_FLASH - Flash mode. - - - V4L2_FLASH_LED_MODE_TORCH - Torch mode. See V4L2_CID_FLASH_TORCH_INTENSITY. - - - - - - V4L2_CID_FLASH_STROBE_SOURCE - menu - - Defines the source of the flash LED - strobe. - - - - - - V4L2_FLASH_STROBE_SOURCE_SOFTWARE - The flash strobe is triggered by using - the V4L2_CID_FLASH_STROBE control. - - - V4L2_FLASH_STROBE_SOURCE_EXTERNAL - The flash strobe is triggered by an - external source. Typically this is a sensor, - which makes it possible to synchronises the - flash strobe start to exposure start. - - - - - - V4L2_CID_FLASH_STROBE - button - - - Strobe flash. Valid when - V4L2_CID_FLASH_LED_MODE is set to - V4L2_FLASH_LED_MODE_FLASH and V4L2_CID_FLASH_STROBE_SOURCE - is set to V4L2_FLASH_STROBE_SOURCE_SOFTWARE. Setting this - control may not be possible in presence of some faults. - See V4L2_CID_FLASH_FAULT. - - - V4L2_CID_FLASH_STROBE_STOP - button - - Stop flash strobe immediately. - - - V4L2_CID_FLASH_STROBE_STATUS - boolean - - - Strobe status: whether the flash - is strobing at the moment or not. This is a read-only - control. - - - V4L2_CID_FLASH_TIMEOUT - integer - - - Hardware timeout for flash. The - flash strobe is stopped after this period of time has - passed from the start of the strobe. - - - V4L2_CID_FLASH_INTENSITY - integer - - - Intensity of the flash strobe when - the flash LED is in flash mode - (V4L2_FLASH_LED_MODE_FLASH). The unit should be milliamps - (mA) if possible. - - - V4L2_CID_FLASH_TORCH_INTENSITY - integer - - - Intensity of the flash LED in - torch mode (V4L2_FLASH_LED_MODE_TORCH). The unit should be - milliamps (mA) if possible. Setting this control may not - be possible in presence of some faults. See - V4L2_CID_FLASH_FAULT. - - - V4L2_CID_FLASH_INDICATOR_INTENSITY - integer - - - Intensity of the indicator LED. - The indicator LED may be fully independent of the flash - LED. The unit should be microamps (uA) if possible. - - - V4L2_CID_FLASH_FAULT - bitmask - - - Faults related to the flash. The - faults tell about specific problems in the flash chip - itself or the LEDs attached to it. Faults may prevent - further use of some of the flash controls. In particular, - V4L2_CID_FLASH_LED_MODE is set to V4L2_FLASH_LED_MODE_NONE - if the fault affects the flash LED. Exactly which faults - have such an effect is chip dependent. Reading the faults - resets the control and returns the chip to a usable state - if possible. - - - - - - V4L2_FLASH_FAULT_OVER_VOLTAGE - Flash controller voltage to the flash LED - has exceeded the limit specific to the flash - controller. - - - V4L2_FLASH_FAULT_TIMEOUT - The flash strobe was still on when - the timeout set by the user --- - V4L2_CID_FLASH_TIMEOUT control --- has expired. - Not all flash controllers may set this in all - such conditions. - - - V4L2_FLASH_FAULT_OVER_TEMPERATURE - The flash controller has overheated. - - - V4L2_FLASH_FAULT_SHORT_CIRCUIT - The short circuit protection of the flash - controller has been triggered. - - - V4L2_FLASH_FAULT_OVER_CURRENT - Current in the LED power supply has exceeded the limit - specific to the flash controller. - - - V4L2_FLASH_FAULT_INDICATOR - The flash controller has detected a short or open - circuit condition on the indicator LED. - - - - - - V4L2_CID_FLASH_CHARGE - boolean - - Enable or disable charging of the xenon - flash capacitor. - - - V4L2_CID_FLASH_READY - boolean - - - Is the flash ready to strobe? - Xenon flashes require their capacitors charged before - strobing. LED flashes often require a cooldown period - after strobe during which another strobe will not be - possible. This is a read-only control. - - - - -
@@ -4268,6 +4533,177 @@ interface and may change in the future. pixels / second. + + V4L2_CID_TEST_PATTERN + menu + + + Some capture/display/sensor devices have + the capability to generate test pattern images. These hardware + specific test patterns can be used to test if a device is working + properly. + + + + + + +
+ +
+ Digital Video Control Reference + + + Experimental + + This is an experimental interface and may + change in the future. + + + + The Digital Video control class is intended to control receivers + and transmitters for VGA, + DVI + (Digital Visual Interface), HDMI () and DisplayPort (). + These controls are generally expected to be private to the receiver or transmitter + subdevice that implements them, so they are only exposed on the + /dev/v4l-subdev* device node. + + + Note that these devices can have multiple input or output pads which are + hooked up to e.g. HDMI connectors. Even though the subdevice will receive or + transmit video from/to only one of those pads, the other pads can still be + active when it comes to EDID (Extended Display Identification Data, + ) and HDCP (High-bandwidth Digital Content + Protection System, ) processing, allowing the device + to do the fairly slow EDID/HDCP handling in advance. This allows for quick + switching between connectors. + + These pads appear in several of the controls in this section as + bitmasks, one bit for each pad. Bit 0 corresponds to pad 0, bit 1 to pad 1, + etc. The maximum value of the control is the set of valid pads. + + + Digital Video Control IDs + + + + + + + + + + + ID + Type + Description + + + + + + V4L2_CID_DV_CLASS + class + + + The Digital Video class descriptor. + + + V4L2_CID_DV_TX_HOTPLUG + bitmask + + + Many connectors have a hotplug pin which is high + if EDID information is available from the source. This control shows the + state of the hotplug pin as seen by the transmitter. + Each bit corresponds to an output pad on the transmitter. If an output pad + does not have an associated hotplug pin, then the bit for that pad will be 0. + This read-only control is applicable to DVI-D, HDMI and DisplayPort connectors. + + + + V4L2_CID_DV_TX_RXSENSE + bitmask + + + Rx Sense is the detection of pull-ups on the TMDS + clock lines. This normally means that the sink has left/entered standby (i.e. + the transmitter can sense that the receiver is ready to receive video). + Each bit corresponds to an output pad on the transmitter. If an output pad + does not have an associated Rx Sense, then the bit for that pad will be 0. + This read-only control is applicable to DVI-D and HDMI devices. + + + + V4L2_CID_DV_TX_EDID_PRESENT + bitmask + + + When the transmitter sees the hotplug signal from the + receiver it will attempt to read the EDID. If set, then the transmitter has read + at least the first block (= 128 bytes). + Each bit corresponds to an output pad on the transmitter. If an output pad + does not support EDIDs, then the bit for that pad will be 0. + This read-only control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. + + + + V4L2_CID_DV_TX_MODE + enum v4l2_dv_tx_mode + + + HDMI transmitters can transmit in DVI-D mode (just video) + or in HDMI mode (video + audio + auxiliary data). This control selects which mode + to use: V4L2_DV_TX_MODE_DVI_D or V4L2_DV_TX_MODE_HDMI. + This control is applicable to HDMI connectors. + + + + V4L2_CID_DV_TX_RGB_RANGE + enum v4l2_dv_rgb_range + + + Select the quantization range for RGB output. V4L2_DV_RANGE_AUTO + follows the RGB quantization range specified in the standard for the video interface + (ie. for HDMI). V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the standard + to be compatible with sinks that have not implemented the standard correctly + (unfortunately quite common for HDMI and DVI-D). Full range allows all possible values to be + used whereas limited range sets the range to (16 << (N-8)) - (235 << (N-8)) + where N is the number of bits per component. + This control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. + + + + V4L2_CID_DV_RX_POWER_PRESENT + bitmask + + + Detects whether the receiver receives power from the source + (e.g. HDMI carries 5V on one of the pins). This is often used to power an eeprom + which contains EDID information, such that the source can read the EDID even if + the sink is in standby/power off. + Each bit corresponds to an input pad on the transmitter. If an input pad + cannot detect whether power is present, then the bit for that pad will be 0. + This read-only control is applicable to DVI-D, HDMI and DisplayPort connectors. + + + + V4L2_CID_DV_RX_RGB_RANGE + enum v4l2_dv_rgb_range + + + Select the quantization range for RGB input. V4L2_DV_RANGE_AUTO + follows the RGB quantization range specified in the standard for the video interface + (ie. for HDMI). V4L2_DV_RANGE_LIMITED and V4L2_DV_RANGE_FULL override the standard + to be compatible with sources that have not implemented the standard correctly + (unfortunately quite common for HDMI and DVI-D). Full range allows all possible values to be + used whereas limited range sets the range to (16 << (N-8)) - (235 << (N-8)) + where N is the number of bits per component. + This control is applicable to VGA, DVI-A/D, HDMI and DisplayPort connectors. + + diff --git a/Documentation/DocBook/media/v4l/dev-osd.xml b/Documentation/DocBook/media/v4l/dev-osd.xml index 479d9433869aff1e18fdc12d3c2aa1d0bbee772b..dd91d6134e8c950a0add05ab4e6cd45f2c04b1f7 100644 --- a/Documentation/DocBook/media/v4l/dev-osd.xml +++ b/Documentation/DocBook/media/v4l/dev-osd.xml @@ -1,13 +1,6 @@ Video Output Overlay InterfaceAlso known as On-Screen Display (OSD) - - Experimental - - This is an experimental -interface and may change in the future. - - Some video output devices can overlay a framebuffer image onto the outgoing video signal. Applications can set up such an overlay using this interface, which borrows structures and ioctls of the - For more information see the core RDS standard + For more information see the core RDS standard and the RBDS standard . Note that the RBDS standard as is used in the USA is almost identical diff --git a/Documentation/DocBook/media/v4l/dev-subdev.xml b/Documentation/DocBook/media/v4l/dev-subdev.xml index a3d9dd093268747de3751dcc41001e1fba638b11..d15aaf83f56f433a6fa09711a5b0ba5625ed30a0 100644 --- a/Documentation/DocBook/media/v4l/dev-subdev.xml +++ b/Documentation/DocBook/media/v4l/dev-subdev.xml @@ -374,29 +374,29 @@ rectangle --- if it is supported by the hardware. - Sink pad format. The user configures the sink pad + Sink pad format. The user configures the sink pad format. This format defines the parameters of the image the - entity receives through the pad for further processing. + entity receives through the pad for further processing. - Sink pad actual crop selection. The sink pad crop - defines the crop performed to the sink pad format. + Sink pad actual crop selection. The sink pad crop + defines the crop performed to the sink pad format. - Sink pad actual compose selection. The size of the + Sink pad actual compose selection. The size of the sink pad compose rectangle defines the scaling ratio compared to the size of the sink pad crop rectangle. The location of the compose rectangle specifies the location of the actual sink compose rectangle in the sink compose bounds - rectangle. + rectangle. - Source pad actual crop selection. Crop on the source + Source pad actual crop selection. Crop on the source pad defines crop performed to the image in the sink compose - bounds rectangle. + bounds rectangle. - Source pad format. The source pad format defines the + Source pad format. The source pad format defines the output pixel format of the subdev, as well as the other parameters with the exception of the image width and height. Width and height are defined by the size of the source pad - actual crop selection. + actual crop selection.Accessing any of the above rectangles not supported by the diff --git a/Documentation/DocBook/media/v4l/gen-errors.xml b/Documentation/DocBook/media/v4l/gen-errors.xml index 5bbf3ce1973a8df5d72619ce3df4cc62de52b036..7e29a4e1f696ec0c898fa431c4ea9163b5a12de9 100644 --- a/Documentation/DocBook/media/v4l/gen-errors.xml +++ b/Documentation/DocBook/media/v4l/gen-errors.xml @@ -6,6 +6,15 @@ &cs-str; + + EAGAIN (aka EWOULDBLOCK) + The ioctl can't be handled because the device is in state where + it can't perform it. This could happen for example in case where + device is sleeping and ioctl is performed to query statistics. + It is also returned when the ioctl would need to wait + for an event, but the device was opened in non-blocking mode. + + EBADF The file descriptor is not a valid. @@ -50,22 +59,12 @@ that this request would overcommit the usb bandwidth reserved for periodic transfers (up to 80% of the USB bandwidth). - - ENOSYS or EOPNOTSUPP - Function not available for this device (dvb API only. Will likely - be replaced anytime soon by ENOTTY). - EPERM Permission denied. Can be returned if the device needs write permission, or some special capabilities is needed (e. g. root) - - EWOULDBLOCK - Operation would block. Used when the ioctl would need to wait - for an event, but the device was opened in non-blocking mode. -
diff --git a/Documentation/DocBook/media/v4l/io.xml b/Documentation/DocBook/media/v4l/io.xml index 1885cc0755cb48a438aadfe686857f46ee541172..b5d1cbdc558bdfa5cfbd6e451425dabc5456b0ce 100644 --- a/Documentation/DocBook/media/v4l/io.xml +++ b/Documentation/DocBook/media/v4l/io.xml @@ -613,8 +613,8 @@ field is independent of the timestamp and __u32 sequence - Set by the driver, counting the frames in the -sequence. + Set by the driver, counting the frames (not fields!) in +sequence. This field is set for both input and output devices. In for details. length Size of the buffer (not the payload) in bytes for the - single-planar API. For the multi-planar API should contain the - number of elements in the planes array. + single-planar API. For the multi-planar API the application sets + this to the number of elements in the planes + array. The driver will fill in the actual number of valid elements in + that array. __u32 reserved2 - A place holder for future extensions and custom -(driver defined) buffer types -V4L2_BUF_TYPE_PRIVATE and higher. Applications + A place holder for future extensions. Applications should set this to 0. __u32 reserved - A place holder for future extensions and custom -(driver defined) buffer types -V4L2_BUF_TYPE_PRIVATE and higher. Applications + A place holder for future extensions. Applications should set this to 0. @@ -827,14 +825,7 @@ should set this to 0. V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY 8 Buffer for video output overlay (OSD), see . Status: Experimental. - - - V4L2_BUF_TYPE_PRIVATE - 0x80 - This and higher values are reserved for custom -(driver defined) buffer types. + linkend="osd" />. diff --git a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml index 5274c24d11e0a94ce55a05d166580f5cda50196f..a990b34d911a123f775f20001f9e9629947276b2 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml @@ -1,11 +1,13 @@ - + - V4L2_PIX_FMT_NV12M ('NM12') + V4L2_PIX_FMT_NV12M ('NM12'), V4L2_PIX_FMT_NV21M ('NM21'), V4L2_PIX_FMT_NV12MT_16X16 &manvol; - V4L2_PIX_FMT_NV12M - Variation of V4L2_PIX_FMT_NV12 with planes + V4L2_PIX_FMT_NV12M + V4L2_PIX_FMT_NV21M + V4L2_PIX_FMT_NV12MT_16X16 + Variation of V4L2_PIX_FMT_NV12 and V4L2_PIX_FMT_NV21 with planes non contiguous in memory. @@ -22,7 +24,12 @@ The CbCr plane is the same width, in bytes, as the Y plane (and of the image), but is half as tall in pixels. Each CbCr pair belongs to four pixels. For example, Cb0/Cr0 belongs to Y'00, Y'01, -Y'10, Y'11. +Y'10, Y'11. +V4L2_PIX_FMT_NV12MT_16X16 is the tiled version of +V4L2_PIX_FMT_NV12M with 16x16 macroblock tiles. Here pixels +are arranged in 16x16 2D tiles and tiles are arranged in linear order in memory. +V4L2_PIX_FMT_NV21M is the same as V4L2_PIX_FMT_NV12M +except the Cb and Cr bytes are swapped, the CrCb plane starts with a Cr byte. V4L2_PIX_FMT_NV12M is intended to be used only in drivers and applications that support the multi-planar API, diff --git a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml index 8eace3e2e7d4d7e0176f7539341d006fdb81bd83..2d3f0b1aefe0c878b6f133987b4abf70857c9c39 100644 --- a/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml +++ b/Documentation/DocBook/media/v4l/pixfmt-srggb10dpcm8.xml @@ -22,8 +22,7 @@ with 10 bits per colour compressed to 8 bits each, using DPCM compression. DPCM, differential pulse-code modulation, is lossy. Each colour component consumes 8 bits of memory. In other respects - this format is similar to . + this format is similar to . diff --git a/Documentation/DocBook/media/v4l/pixfmt-yvu420m.xml b/Documentation/DocBook/media/v4l/pixfmt-yvu420m.xml new file mode 100644 index 0000000000000000000000000000000000000000..2330667907c7313372a12ef50fb3139ce19803e9 --- /dev/null +++ b/Documentation/DocBook/media/v4l/pixfmt-yvu420m.xml @@ -0,0 +1,154 @@ + + + V4L2_PIX_FMT_YVU420M ('YM21') + &manvol; + + + V4L2_PIX_FMT_YVU420M + Variation of V4L2_PIX_FMT_YVU420 + with planes non contiguous in memory. + + + + Description + + This is a multi-planar format, as opposed to a packed format. +The three components are separated into three sub-images or planes. + +The Y plane is first. The Y plane has one byte per pixel. The Cr data +constitutes the second plane which is half the width and half +the height of the Y plane (and of the image). Each Cr belongs to four +pixels, a two-by-two square of the image. For example, +Cr0 belongs to Y'00, +Y'01, Y'10, and +Y'11. The Cb data, just like the Cr plane, constitutes +the third plane. + + If the Y plane has pad bytes after each row, then the Cr +and Cb planes have half as many pad bytes after their rows. In other +words, two Cx rows (including padding) is exactly as long as one Y row +(including padding). + + V4L2_PIX_FMT_YVU420M is intended to be +used only in drivers and applications that support the multi-planar API, +described in . + + + <constant>V4L2_PIX_FMT_YVU420M</constant> 4 × 4 +pixel image + + + Byte Order. + Each cell is one byte. + + + + + + start0 + 0: + Y'00 + Y'01 + Y'02 + Y'03 + + + start0 + 4: + Y'10 + Y'11 + Y'12 + Y'13 + + + start0 + 8: + Y'20 + Y'21 + Y'22 + Y'23 + + + start0 + 12: + Y'30 + Y'31 + Y'32 + Y'33 + + + + start1 + 0: + Cr00 + Cr01 + + + start1 + 2: + Cr10 + Cr11 + + + + start2 + 0: + Cb00 + Cb01 + + + start2 + 2: + Cb10 + Cb11 + + + + + + + + + Color Sample Location. + + + + + + + 01 + 23 + + + 0 + YY + YY + + + + C + C + + + 1 + YY + YY + + + + + + 2 + YY + YY + + + + C + C + + + 3 + YY + YY + + + + + + + + + diff --git a/Documentation/DocBook/media/v4l/pixfmt.xml b/Documentation/DocBook/media/v4l/pixfmt.xml index e58934c92895f159fc3200946a0d75ed50434e84..bf94f417592cac290670f4e65ace3a54fc1eb173 100644 --- a/Documentation/DocBook/media/v4l/pixfmt.xml +++ b/Documentation/DocBook/media/v4l/pixfmt.xml @@ -708,6 +708,7 @@ information. &sub-y41p; &sub-yuv420; &sub-yuv420m; + &sub-yvu420m; &sub-yuv410; &sub-yuv422p; &sub-yuv411p; @@ -757,6 +758,11 @@ extended control V4L2_CID_MPEG_STREAM_TYPE, see 'AVC1' H264 video elementary stream without start codes. + + V4L2_PIX_FMT_H264_MVC + 'MVC' + H264 MVC video elementary stream. + V4L2_PIX_FMT_H263 'H263' @@ -792,6 +798,11 @@ extended control V4L2_CID_MPEG_STREAM_TYPE, see 'VC1L' VC1, SMPTE 421M Annex L compliant stream. + + V4L2_PIX_FMT_VP8 + 'VP8' + VP8 video elementary stream. + @@ -995,6 +1006,34 @@ the other bits are set to 0. Old 6-bit greyscale format. Only the most significant 6 bits of each byte are used, the other bits are set to 0. + + V4L2_PIX_FMT_S5C_UYVY_JPG + 'S5CI' + Two-planar format used by Samsung S5C73MX cameras. The +first plane contains interleaved JPEG and UYVY image data, followed by meta data +in form of an array of offsets to the UYVY data blocks. The actual pointer array +follows immediately the interleaved JPEG/UYVY data, the number of entries in +this array equals the height of the UYVY image. Each entry is a 4-byte unsigned +integer in big endian order and it's an offset to a single pixel line of the +UYVY image. The first plane can start either with JPEG or UYVY data chunk. The +size of a single UYVY block equals the UYVY image's width multiplied by 2. The +size of a JPEG chunk depends on the image and can vary with each line. +The second plane, at an offset of 4084 bytes, contains a 4-byte offset to +the pointer array in the first plane. This offset is followed by a 4-byte value +indicating size of the pointer array. All numbers in the second plane are also +in big endian order. Remaining data in the second plane is undefined. The +information in the second plane allows to easily find location of the pointer +array, which can be different for each frame. The size of the pointer array is +constant for given UYVY image height. +In order to extract UYVY and JPEG frames an application can initially set +a data pointer to the start of first plane and then add an offset from the first +entry of the pointers table. Such a pointer indicates start of an UYVY image +pixel line. Whole UYVY line can be copied to a separate buffer. These steps +should be repeated for each line, i.e. the number of entries in the pointer +array. Anything what's in between the UYVY lines is JPEG data and should be +concatenated to form the JPEG stream. + + diff --git a/Documentation/DocBook/media/v4l/selection-api.xml b/Documentation/DocBook/media/v4l/selection-api.xml index e7ed5077834deaa027fe1a202a555631338dba15..4c238ce068b0aa238155037be481336d800b8c78 100644 --- a/Documentation/DocBook/media/v4l/selection-api.xml +++ b/Documentation/DocBook/media/v4l/selection-api.xml @@ -40,6 +40,7 @@ cropping and composing rectangles have the same size.
Selection targets +
Cropping and composing targets @@ -52,12 +53,12 @@ cropping and composing rectangles have the same size.
+ + See for more + information.
- See for more - information. -
Configuration @@ -216,18 +217,17 @@ composing and cropping operations by setting the appropriate targets. The V4L2 API lacks any support for composing to and cropping from an image inside a memory buffer. The application could configure a capture device to fill only a part of an image by abusing V4L2 API. Cropping a smaller image from a larger -one is achieved by setting the field -&v4l2-pix-format;::bytesperline . Introducing an image offsets -could be done by modifying field &v4l2-buffer;::m:userptr - before calling VIDIOC_QBUF . Those +one is achieved by setting the field +&v4l2-pix-format;::bytesperline. Introducing an image offsets +could be done by modifying field &v4l2-buffer;::m_userptr +before calling VIDIOC_QBUF . Those operations should be avoided because they are not portable (endianness), and do not work for macroblock and Bayer formats and mmap buffers. The selection API deals with configuration of buffer cropping/composing in a clear, intuitive and portable way. Next, with the selection API the concepts of the padded target -and constraints flags are introduced. Finally, &v4l2-crop; - and &v4l2-cropcap; have no reserved -fields. Therefore there is no way to extend their functionality. The new - &v4l2-selection; provides a lot of place for future +and constraints flags are introduced. Finally, &v4l2-crop; and &v4l2-cropcap; +have no reserved fields. Therefore there is no way to extend their functionality. +The new &v4l2-selection; provides a lot of place for future extensions. Driver developers are encouraged to implement only selection API. The former cropping API would be simulated using the new one. diff --git a/Documentation/DocBook/media/v4l/subdev-formats.xml b/Documentation/DocBook/media/v4l/subdev-formats.xml index 49c532ebbbbefe3a6aac004dd4192936ec14e880..a0a936455faef1c68d59f5997b8697b7ad1e2d65 100644 --- a/Documentation/DocBook/media/v4l/subdev-formats.xml +++ b/Documentation/DocBook/media/v4l/subdev-formats.xml @@ -2565,5 +2565,49 @@
+ +
+ Vendor and Device Specific Formats + + + Experimental + This is an experimental +interface and may change in the future. + + + This section lists complex data formats that are either vendor or + device specific. + + + The following table lists the existing vendor and device specific + formats. + + + Vendor and device specific formats + + + + + + + Identifier + Code + Comments + + + + + V4L2_MBUS_FMT_S5C_UYVY_JPEG_1X8 + 0x5001 + + Interleaved raw UYVY and JPEG image format with embedded + meta-data used by Samsung S3C73MX camera sensors. + + + + +
+
+
diff --git a/Documentation/DocBook/media/v4l/v4l2.xml b/Documentation/DocBook/media/v4l/v4l2.xml index eee6908c749fd3b6fb66e0e9ab84c9775c09509b..10ccde9d16d016d6f141f62479afa8f73753850b 100644 --- a/Documentation/DocBook/media/v4l/v4l2.xml +++ b/Documentation/DocBook/media/v4l/v4l2.xml @@ -145,9 +145,12 @@ applications. --> hv Added VIDIOC_ENUM_FREQ_BANDS. + + + 3.5 2012-05-07 - sa, sn + sa, sn, hv Added V4L2_CTRL_TYPE_INTEGER_MENU and V4L2 subdev selections API. Improved the description of V4L2_CID_COLORFX control, added V4L2_CID_COLORFX_CBCR control. @@ -158,11 +161,8 @@ applications. --> V4L2_CID_3A_LOCK, V4L2_CID_AUTO_FOCUS_START, V4L2_CID_AUTO_FOCUS_STOP, V4L2_CID_AUTO_FOCUS_STATUS and V4L2_CID_AUTO_FOCUS_RANGE. - - 2012-05-01 - hv - Added VIDIOC_ENUM_DV_TIMINGS, VIDIOC_QUERY_DV_TIMINGS and - VIDIOC_DV_TIMINGS_CAP. + Added VIDIOC_ENUM_DV_TIMINGS, VIDIOC_QUERY_DV_TIMINGS and + VIDIOC_DV_TIMINGS_CAP. @@ -472,7 +472,7 @@ and discussions on the V4L mailing list. Video for Linux Two API Specification - Revision 3.5 + Revision 3.6 &sub-common; @@ -581,6 +581,7 @@ and discussions on the V4L mailing list. &sub-subdev-enum-frame-size; &sub-subdev-enum-mbus-code; &sub-subdev-g-crop; + &sub-subdev-g-edid; &sub-subdev-g-fmt; &sub-subdev-g-frame-interval; &sub-subdev-g-selection; diff --git a/Documentation/DocBook/media/v4l/vidioc-cropcap.xml b/Documentation/DocBook/media/v4l/vidioc-cropcap.xml index f1bac2c6e9781e1079ee4ade3a732c515a1cfe42..bf7cc979fdfa6bbba9d92c0d5f7e7b68cc6a1518 100644 --- a/Documentation/DocBook/media/v4l/vidioc-cropcap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-cropcap.xml @@ -59,6 +59,9 @@ constant except when switching the video standard. Remember this switch can occur implicit when switching the video input or output. + This ioctl must be implemented for video capture or output devices that +support cropping and/or scaling and/or have non-square pixels, and for overlay devices. + struct <structname>v4l2_cropcap</structname> @@ -70,10 +73,10 @@ output. Type of the data stream, set by the application. Only these types are valid here: V4L2_BUF_TYPE_VIDEO_CAPTURE, +V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, V4L2_BUF_TYPE_VIDEO_OUTPUT, -V4L2_BUF_TYPE_VIDEO_OVERLAY, and custom (driver -defined) types with code V4L2_BUF_TYPE_PRIVATE -and higher. See . +V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE and +V4L2_BUF_TYPE_VIDEO_OVERLAY. See . struct v4l2_rect @@ -156,8 +159,7 @@ on 22 Oct 2002 subject "Re:[V4L][patches!] Re:v4l2/kernel-2.5" --> EINVAL The &v4l2-cropcap; type is -invalid. This is not permitted for video capture, output and overlay devices, -which must support VIDIOC_CROPCAP. +invalid. diff --git a/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml b/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml index 74b87f6e480aa241f751c4423060979b078db7be..9215627b04c77827e7b3195857d53c0fbdcea355 100644 --- a/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-decoder-cmd.xml @@ -49,13 +49,6 @@ Description - - Experimental - - This is an experimental -interface and may change in the future. - - These ioctls control an audio/video (usually MPEG-) decoder. VIDIOC_DECODER_CMD sends a command to the decoder, VIDIOC_TRY_DECODER_CMD can be used to diff --git a/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml index f431b3ba79bd70ce3e0e277908f57d1168ff2ee2..0619ca5d2d36a250dae8ffe97771c5aad1e06c85 100644 --- a/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-encoder-cmd.xml @@ -49,13 +49,6 @@ Description - - Experimental - - This is an experimental -interface and may change in the future. - - These ioctls control an audio/video (usually MPEG-) encoder. VIDIOC_ENCODER_CMD sends a command to the encoder, VIDIOC_TRY_ENCODER_CMD can be used to diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml index 509f0012d2a68044860eb59077b0ee6717f28e38..fced5fb0dbf013d264c8be0fc994bbd43d1620f8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-presets.xml @@ -229,6 +229,12 @@ intended for the user. is out of bounds. + + ENODATA + + Digital video presets are not supported for this input or output. + + diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml index 24c3bf4fd29a46cdcd71dc3bab3991df46002fc0..b3e17c1dfaf524bd4a485d3ab7bb4ccb5cb70203 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-dv-timings.xml @@ -106,6 +106,12 @@ application. is out of bounds. + + ENODATA + + Digital video presets are not supported for this input or output. + + diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml index 81ebe48317fe57064045fc77912f1ee17dc96a25..f8dfeed34fcac79793df6303f9e70f3393033104 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-fmt.xml @@ -58,6 +58,9 @@ structure. Drivers fill the rest of the structure or return an incrementing by one until EINVAL is returned. + Note that after switching input or output the list of enumerated image +formats may be different. +
struct <structname>v4l2_fmtdesc</structname> @@ -78,10 +81,8 @@ Only these types are valid here: V4L2_BUF_TYPE_VIDEO_CAPTURE, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE, V4L2_BUF_TYPE_VIDEO_OUTPUT, -V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE, -V4L2_BUF_TYPE_VIDEO_OVERLAY, and custom (driver -defined) types with code V4L2_BUF_TYPE_PRIVATE -and higher. See . +V4L2_BUF_TYPE_VIDEO_OUTPUT_MPLANE and +V4L2_BUF_TYPE_VIDEO_OVERLAY. See . __u32 diff --git a/Documentation/DocBook/media/v4l/vidioc-enum-framesizes.xml b/Documentation/DocBook/media/v4l/vidioc-enum-framesizes.xml index f77a13f486d7968e60128d31a485bde9e580bc5f..a78454b5abcd875e517418f4b803ebed1dce8b1a 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enum-framesizes.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enum-framesizes.xml @@ -50,13 +50,6 @@ and pixel format and receives a frame width and height. Description - - Experimental - - This is an experimental -interface and may change in the future. - - This ioctl allows applications to enumerate all frame sizes (&ie; width and height in pixels) that the device supports for the given pixel format. diff --git a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml index 46d5a044a537a0f2647a4755f5601f9cbfc86d5c..3c9a81305ad4af75f8c6728dbfa9a879db4e6167 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enuminput.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enuminput.xml @@ -283,7 +283,7 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009. This input supports setting DV presets by using VIDIOC_S_DV_PRESET. - V4L2_IN_CAP_CUSTOM_TIMINGS + V4L2_IN_CAP_DV_TIMINGS 0x00000002 This input supports setting video timings by using VIDIOC_S_DV_TIMINGS. diff --git a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml index 428020000ef001f4de42b70f243ac551603f1068..f4ab0798545dc7f3ff67a5d5e0d51d2c5562d90b 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enumoutput.xml @@ -168,7 +168,7 @@ input/output interface to linux-media@vger.kernel.org on 19 Oct 2009. This output supports setting DV presets by using VIDIOC_S_DV_PRESET. - V4L2_OUT_CAP_CUSTOM_TIMINGS + V4L2_OUT_CAP_DV_TIMINGS 0x00000002 This output supports setting video timings by using VIDIOC_S_DV_TIMINGS. diff --git a/Documentation/DocBook/media/v4l/vidioc-enumstd.xml b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml index 3a5fc5405f96a869f0ff93262211c430dcbd4123..8065099401d16fb34a12ce6156592f2a601f3ce0 100644 --- a/Documentation/DocBook/media/v4l/vidioc-enumstd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-enumstd.xml @@ -378,6 +378,12 @@ system) is out of bounds. + + ENODATA + + Standard video timings are not supported for this input or output. + + diff --git a/Documentation/DocBook/media/v4l/vidioc-g-crop.xml b/Documentation/DocBook/media/v4l/vidioc-g-crop.xml index c4ff3b1887fb6b0782caf2c90c6edfa7fb64ed72..75c6a93de3c173246aff4763da48cfdc4b3ce81f 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-crop.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-crop.xml @@ -104,10 +104,8 @@ changed and VIDIOC_S_CROP returns the type Type of the data stream, set by the application. Only these types are valid here: V4L2_BUF_TYPE_VIDEO_CAPTURE, -V4L2_BUF_TYPE_VIDEO_OUTPUT, -V4L2_BUF_TYPE_VIDEO_OVERLAY, and custom (driver -defined) types with code V4L2_BUF_TYPE_PRIVATE -and higher. See . +V4L2_BUF_TYPE_VIDEO_OUTPUT and +V4L2_BUF_TYPE_VIDEO_OVERLAY. See . &v4l2-rect; diff --git a/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml b/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml index 61be9fa3803acbb707277e7e3b5527b4d681533b..b9ea37634f6ccbfe06697df5459ed5232b406543 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-dv-preset.xml @@ -77,6 +77,12 @@ If the preset is not supported, it returns an &EINVAL; VIDIOC_S_DV_PRESET,VIDIOC_S_DV_PRESET parameter was unsuitable. + + ENODATA + + Digital video presets are not supported for this input or output. + + EBUSY @@ -104,7 +110,4 @@ If the preset is not supported, it returns an &EINVAL;
- - &return-value; - diff --git a/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml index eda1a2991bbe4382f717c5407295407220250161..72369707bd77d00bd78e1546f2d8c17a1e6c0ae8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-dv-timings.xml @@ -56,7 +56,9 @@ a pointer to the &v4l2-dv-timings; structure as argument. If the ioctl is not su or the timing values are not correct, the driver returns &EINVAL;. The linux/v4l2-dv-timings.h header can be used to get the timings of the formats in the and -standards. +standards. If the current input or output does not support DV timings (e.g. if +&VIDIOC-ENUMINPUT; does not set the V4L2_IN_CAP_DV_TIMINGS flag), then +&ENODATA; is returned. @@ -70,6 +72,12 @@ standards. VIDIOC_S_DV_TIMINGS parameter was unsuitable. + + ENODATA + + Digital video timings are not supported for this input or output. + + EBUSY @@ -320,7 +328,4 @@ detected or used depends on the hardware. - - &return-value; - diff --git a/Documentation/DocBook/media/v4l/vidioc-g-enc-index.xml b/Documentation/DocBook/media/v4l/vidioc-g-enc-index.xml index 2aef02c9044e039db683f9b37307e24ae0c8eb3e..be25029a16f11dff77a39e5b026fe888db4f5ada 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-enc-index.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-enc-index.xml @@ -48,13 +48,6 @@ Description - - Experimental - - This is an experimental -interface and may change in the future. - - The VIDIOC_G_ENC_INDEX ioctl provides meta data about a compressed video stream the same or another application currently reads from the driver, which is useful for diff --git a/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml b/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml index 52acff193a6f5dc651d10e5c0413c9e90e05cdbc..ee8f56e1bac0924a1cffc27462743ad24aa62088 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-fmt.xml @@ -81,7 +81,7 @@ the application calls the VIDIOC_S_FMT ioctl with a pointer to a v4l2_format structure the driver checks and adjusts the parameters against hardware abilities. Drivers -should not return an error code unless the input is ambiguous, this is +should not return an error code unless the type field is invalid, this is a mechanism to fathom device capabilities and to approach parameters acceptable for both the application and driver. On success the driver may program the hardware, allocate resources and generally prepare for @@ -107,6 +107,10 @@ disabling I/O or possibly time consuming hardware preparations. Although strongly recommended drivers are not required to implement this ioctl. + The format as returned by VIDIOC_TRY_FMT +must be identical to what VIDIOC_S_FMT returns for +the same input or output. + struct <structname>v4l2_format</structname> @@ -170,9 +174,7 @@ capture and output devices. __u8 raw_data[200] - Place holder for future extensions and custom -(driver defined) formats with type -V4L2_BUF_TYPE_PRIVATE and higher. + Place holder for future extensions. @@ -187,8 +189,7 @@ capture and output devices.EINVAL The &v4l2-format; type -field is invalid, the requested buffer type not supported, or the -format is not supported with this buffer type. +field is invalid or the requested buffer type not supported. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml index f83d2cdd1185419850783f18830abac424b340b8..9058224d1bbfff9c9bcbb71ca017793569a92941 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-parm.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-parm.xml @@ -108,9 +108,7 @@ devices.__u8raw_data[200] - A place holder for future extensions and custom -(driver defined) buffer types V4L2_BUF_TYPE_PRIVATE and -higher. + A place holder for future extensions. diff --git a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml index f76d8a6d9b92df2133babc08456ac3bfc4d9c171..b11ec75e21a10ddff0ea99f16897ec4d660179be 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-selection.xml @@ -152,12 +152,10 @@ satisfactory parameters have been negotiated. If constraints flags have to be violated at then ERANGE is returned. The error indicates that there exist no rectangle that satisfies the constraints. - - Selection targets and flags are documented in . -
+
Size adjustments with constraint flags. @@ -170,9 +168,9 @@ exist no rectangle that satisfies the constraints.
-
+ - +
struct <structname>v4l2_selection</structname> @@ -208,6 +206,7 @@ exist no rectangle that satisfies the constraints.
+ diff --git a/Documentation/DocBook/media/v4l/vidioc-g-std.xml b/Documentation/DocBook/media/v4l/vidioc-g-std.xml index 99ff1a016220aee8461cddf088de122057c29ecf..4a898417de28933cf319d7ea110db3c7365bf199 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-std.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-std.xml @@ -72,7 +72,9 @@ flags, being a write-only ioctl it does not return the actual new standard as the current input does not support the requested standard the driver returns an &EINVAL;. When the standard set is ambiguous drivers may return EINVAL or choose any of the requested -standards. +standards. If the current input or output does not support standard video timings (e.g. if +&VIDIOC-ENUMINPUT; does not set the V4L2_IN_CAP_STD flag), then +&ENODATA; is returned. @@ -85,6 +87,12 @@ standards. The VIDIOC_S_STD parameter was unsuitable. + + ENODATA + + Standard video timings are not supported for this input or output. + + diff --git a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml index 701138f1209de10ae439aff4da056803fbb79713..6cc82010c7366921792eb4204655bfc92675d0bc 100644 --- a/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml +++ b/Documentation/DocBook/media/v4l/vidioc-g-tuner.xml @@ -354,6 +354,12 @@ radio tuners. The &VIDIOC-ENUM-FREQ-BANDS; ioctl can be used to enumerate the available frequency bands. + + V4L2_TUNER_CAP_HWSEEK_PROG_LIM + 0x0800 + The range to search when using the hardware seek functionality + is programmable, see &VIDIOC-S-HW-FREQ-SEEK; for details. + diff --git a/Documentation/DocBook/media/v4l/vidioc-qbuf.xml b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml index 77ff5be0809d13ef530ff07718e243aab98358fc..2d37abefce13e90144941af12cc2baa71f78a700 100644 --- a/Documentation/DocBook/media/v4l/vidioc-qbuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-qbuf.xml @@ -121,8 +121,7 @@ remaining fields or returns an error code. The driver may also set field. It indicates a non-critical (recoverable) streaming error. In such case the application may continue as normal, but should be aware that data in the dequeued buffer might be corrupted. When using the multi-planar API, the -planes array does not have to be passed; the m.planes -member must be set to NULL in that case. +planes array must be passed in as well. By default VIDIOC_DQBUF blocks when no buffer is in the outgoing queue. When the @@ -155,6 +154,8 @@ or no buffers have been allocated yet, or the userptr or length are invalid. + + EIO VIDIOC_DQBUF failed due to an diff --git a/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml b/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml index 1bc8aeb3ff1fe2a57516f39dd54128fc4c30e116..68b49d09e2454d8e6b988521b672bdd80750e182 100644 --- a/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml +++ b/Documentation/DocBook/media/v4l/vidioc-query-dv-preset.xml @@ -65,5 +65,14 @@ returned. &return-value; + + + + ENODATA + + Digital video presets are not supported for this input or output. + + + diff --git a/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml b/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml index 44935a0ffcf0bb619d40898ab0e937f0e13de82b..e185f149e0a18914538eab16e32f684ce15f145d 100644 --- a/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml +++ b/Documentation/DocBook/media/v4l/vidioc-query-dv-timings.xml @@ -77,6 +77,12 @@ capabilities in order to give more precise feedback to the user. &return-value; + + ENODATA + + Digital video timings are not supported for this input or output. + + ENOLINK diff --git a/Documentation/DocBook/media/v4l/vidioc-querybuf.xml b/Documentation/DocBook/media/v4l/vidioc-querybuf.xml index 6e414d7b6df759f83f45ad34256c5ace012a6543..a597155c052d723b7b5c5867f67c564dd2eacebe 100644 --- a/Documentation/DocBook/media/v4l/vidioc-querybuf.xml +++ b/Documentation/DocBook/media/v4l/vidioc-querybuf.xml @@ -48,8 +48,8 @@ Description - This ioctl is part of the memory -mapping I/O method. It can be used to query the status of a + This ioctl is part of the streaming + I/O method. It can be used to query the status of a buffer at any time after buffers have been allocated with the &VIDIOC-REQBUFS; ioctl. @@ -71,6 +71,7 @@ the structure. In the flags field the V4L2_BUF_FLAG_MAPPED, +V4L2_BUF_FLAG_PREPARED, V4L2_BUF_FLAG_QUEUED and V4L2_BUF_FLAG_DONE flags will be valid. The memory field will be set to the current @@ -79,8 +80,10 @@ contains the offset of the buffer from the start of the device memory, the length field its size. For the multi-planar API, fields m.mem_offset and length in the m.planes -array elements will be used instead. The driver may or may not set the remaining -fields and flags, they are meaningless in this context. +array elements will be used instead and the length +field of &v4l2-buffer; is set to the number of filled-in array elements. +The driver may or may not set the remaining fields and flags, they are +meaningless in this context. The v4l2_buffer structure is specified in . diff --git a/Documentation/DocBook/media/v4l/vidioc-querycap.xml b/Documentation/DocBook/media/v4l/vidioc-querycap.xml index f33dd746b66b8177b60f5a431aefc937973e5eea..4c70215ae03fee9040c0472c489753dd3d1fed9a 100644 --- a/Documentation/DocBook/media/v4l/vidioc-querycap.xml +++ b/Documentation/DocBook/media/v4l/vidioc-querycap.xml @@ -90,11 +90,13 @@ ambiguities. __u8 bus_info[32] Location of the device in the system, a -NUL-terminated ASCII string. For example: "PCI Slot 4". This +NUL-terminated ASCII string. For example: "PCI:0000:05:06.0". This information is intended for users, to distinguish multiple -identical devices. If no such information is available the field may -simply count the devices controlled by the driver, or contain the -empty string (bus_info[0] = 0). +identical devices. If no such information is available the field must +simply count the devices controlled by the driver ("platform:vivi-000"). +The bus_info must start with "PCI:" for PCI boards, "PCIe:" for PCI Express boards, +"usb-" for USB devices, "I2C:" for i2c devices, "ISA:" for ISA devices, +"parport" for parallel port devices and "platform:" for platform devices. __u32 diff --git a/Documentation/DocBook/media/v4l/vidioc-querystd.xml b/Documentation/DocBook/media/v4l/vidioc-querystd.xml index 4b79c7c04ed6631c30adc168cf18d5e6608d8478..fe80a183d95776da5c8841ee277496f991420c6c 100644 --- a/Documentation/DocBook/media/v4l/vidioc-querystd.xml +++ b/Documentation/DocBook/media/v4l/vidioc-querystd.xml @@ -62,5 +62,13 @@ current video input or output. &return-value; + + + ENODATA + + Standard video timings are not supported for this input or output. + + + diff --git a/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml b/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml index d7c95057bc5197e68a00ea22a388150a61702478..2b50ef2007f3cc96dc363176e2c173af96c3e2a8 100644 --- a/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml +++ b/Documentation/DocBook/media/v4l/vidioc-reqbufs.xml @@ -109,9 +109,8 @@ as the &v4l2-format; type field. See __u32 reserved[2] - A place holder for future extensions and custom -(driver defined) buffer types V4L2_BUF_TYPE_PRIVATE and -higher. This array should be zeroed by applications. + A place holder for future extensions. This array should +be zeroed by applications. diff --git a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml index 3dd1bec6d3c74c1a6619364aaae41d85d615d17f..5b379e752194a2b096ce512e11facde121c8aabc 100644 --- a/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml +++ b/Documentation/DocBook/media/v4l/vidioc-s-hw-freq-seek.xml @@ -75,6 +75,9 @@ seek is started. This ioctl is supported if the V4L2_CAP_HW_FREQ_SEEK capability is set. + If this ioctl is called from a non-blocking filehandle, then &EAGAIN; is + returned and no seek takes place. + struct <structname>v4l2_hw_freq_seek</structname> @@ -157,6 +160,13 @@ one of the values in the type, fields is wrong. + + EAGAIN + + Attempted to call VIDIOC_S_HW_FREQ_SEEK + with the filehandle in non-blocking mode. + + ENODATA diff --git a/Documentation/DocBook/media/v4l/vidioc-streamon.xml b/Documentation/DocBook/media/v4l/vidioc-streamon.xml index 81cca4569050da8d789dc68973798b69fdbc8a35..716ea15e54a174be6321f19aa4be69fe00487f28 100644 --- a/Documentation/DocBook/media/v4l/vidioc-streamon.xml +++ b/Documentation/DocBook/media/v4l/vidioc-streamon.xml @@ -74,7 +74,12 @@ not transmitted yet. I/O returns to the same state as after calling stream type. This is the same as &v4l2-requestbuffers; type. - Note applications can be preempted for unknown periods right + If VIDIOC_STREAMON is called when streaming +is already in progress, or if VIDIOC_STREAMOFF is called +when streaming is already stopped, then the ioctl does nothing and 0 is +returned. + + Note that applications can be preempted for unknown periods right before or after the VIDIOC_STREAMON or VIDIOC_STREAMOFF calls, there is no notion of starting or stopping "now". Buffer timestamps can be used to diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-edid.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-edid.xml new file mode 100644 index 0000000000000000000000000000000000000000..bbd18f0e6ede8a16797782e3b0dabe04515fc1d2 --- /dev/null +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-edid.xml @@ -0,0 +1,152 @@ + + + ioctl VIDIOC_SUBDEV_G_EDID, VIDIOC_SUBDEV_S_EDID + &manvol; + + + + VIDIOC_SUBDEV_G_EDID + VIDIOC_SUBDEV_S_EDID + Get or set the EDID of a video receiver/transmitter + + + + + + int ioctl + int fd + int request + struct v4l2_subdev_edid *argp + + + + + int ioctl + int fd + int request + const struct v4l2_subdev_edid *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + VIDIOC_SUBDEV_G_EDID, VIDIOC_SUBDEV_S_EDID + + + + argp + + + + + + + + + Description + These ioctls can be used to get or set an EDID associated with an input pad + from a receiver or an output pad of a transmitter subdevice. + + To get the EDID data the application has to fill in the pad, + start_block, blocks and edid + fields and call VIDIOC_SUBDEV_G_EDID. The current EDID from block + start_block and of size blocks + will be placed in the memory edid points to. The edid + pointer must point to memory at least blocks * 128 bytes + large (the size of one block is 128 bytes). + + If there are fewer blocks than specified, then the driver will set blocks + to the actual number of blocks. If there are no EDID blocks available at all, then the error code + ENODATA is set. + + If blocks have to be retrieved from the sink, then this call will block until they + have been read. + + To set the EDID blocks of a receiver the application has to fill in the pad, + blocks and edid fields and set + start_block to 0. It is not possible to set part of an EDID, + it is always all or nothing. Setting the EDID data is only valid for receivers as it makes + no sense for a transmitter. + + The driver assumes that the full EDID is passed in. If there are more EDID blocks than + the hardware can handle then the EDID is not written, but instead the error code E2BIG is set + and blocks is set to the maximum that the hardware supports. + If start_block is any + value other than 0 then the error code EINVAL is set. + + To disable an EDID you set blocks to 0. Depending on the + hardware this will drive the hotplug pin low and/or block the source from reading the EDID + data in some way. In any case, the end result is the same: the EDID is no longer available. + + +
+ struct <structname>v4l2_subdev_edid</structname> + + &cs-str; + + + __u32 + pad + Pad for which to get/set the EDID blocks. + + + __u32 + start_block + Read the EDID from starting with this block. Must be 0 when setting + the EDID. + + + __u32 + blocks + The number of blocks to get or set. Must be less or equal to 256 (the + maximum number of blocks as defined by the standard). When you set the EDID and + blocks is 0, then the EDID is disabled or erased. + + + __u8 * + edid + Pointer to memory that contains the EDID. The minimum size is + blocks * 128. + + + __u32 + reserved[5] + Reserved for future extensions. Applications and drivers must + set the array to zero. + + + +
+ + + + &return-value; + + + + ENODATA + + The EDID data is not available. + + + + E2BIG + + The EDID data you provided is more than the hardware can handle. + + + + + diff --git a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml index f33cc814a01d14d07483a04051f4513ace88876c..1ba9e999af3fec1bed5a3a116f37ac0358caf4e0 100644 --- a/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml +++ b/Documentation/DocBook/media/v4l/vidioc-subdev-g-selection.xml @@ -69,23 +69,22 @@ more information on how each selection target affects the image processing pipeline inside the subdevice. -
+ Types of selection targets There are two types of selection targets: actual and bounds. The actual targets are the targets which configure the hardware. The BOUNDS target will return a rectangle that contain all possible actual rectangles. -
+ -
+ Discovering supported features To discover which targets are supported, the user can perform VIDIOC_SUBDEV_G_SELECTION on them. Any unsupported target will return EINVAL. -
Selection targets and flags are documented in . @@ -132,6 +131,7 @@ + diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl index 4e8e8985cc1722a5594efdb61c2c0a5af1294929..f2413acfe24105b00b529feca5a0490d6a9b126d 100644 --- a/Documentation/DocBook/media_api.tmpl +++ b/Documentation/DocBook/media_api.tmpl @@ -29,7 +29,7 @@ LINUX MEDIA INFRASTRUCTURE API - 2009-2011 + 2009-2012 LinuxTV Developers @@ -53,7 +53,7 @@ Foundation. A copy of the license is included in the chapter entitled video and radio straming devices, including video cameras, analog and digital TV receiver cards, AM/FM receiver cards, streaming capture devices. - It is divided into three parts. + It is divided into four parts. The first part covers radio, capture, cameras and analog TV devices. The second part covers the @@ -62,7 +62,8 @@ Foundation. A copy of the license is included in the chapter entitled in fact it covers several different video standards including DVB-T, DVB-S, DVB-C and ATSC. The API is currently being updated to documment support also for DVB-S2, ISDB-T and ISDB-S. - The third part covers Remote Controller API + The third part covers the Remote Controller API. + The fourth part covers the Media Controller API. For additional information and for the latest development code, see: http://linuxtv.org. For discussing improvements, reporting troubles, sending new drivers, etc, please mail to: Linux Media Mailing List (LMML).. @@ -87,7 +88,7 @@ Foundation. A copy of the license is included in the chapter entitled - 2009-2011 + 2009-2012 Mauro Carvalho Chehab diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index e0aedb7a782718c445d48f8f42ee9e14a3d5a33a..fe122d6e686f50e873d637d3f08929d042df4335 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -1216,8 +1216,6 @@ in this page #define NAND_BBT_LASTBLOCK 0x00000010 /* The bbt is at the given page, else we must scan for the bbt */ #define NAND_BBT_ABSPAGE 0x00000020 -/* The bbt is at the given page, else we must scan for the bbt */ -#define NAND_BBT_SEARCH 0x00000040 /* bbt is stored per chip on multichip devices */ #define NAND_BBT_PERCHIP 0x00000080 /* bbt has a version counter at offset veroffs */ diff --git a/Documentation/DocBook/networking.tmpl b/Documentation/DocBook/networking.tmpl index 59ad69a9d777e768b26b9b21c63de8df59d805c7..29df25016c7c121b1965b7a79122a08b691c1ac4 100644 --- a/Documentation/DocBook/networking.tmpl +++ b/Documentation/DocBook/networking.tmpl @@ -56,7 +56,7 @@ !Enet/core/filter.c Generic Network Statistics -!Iinclude/linux/gen_stats.h +!Iinclude/uapi/linux/gen_stats.h !Enet/core/gen_stats.c !Enet/core/gen_estimator.c @@ -80,7 +80,7 @@ !Enet/wimax/op-rfkill.c !Enet/wimax/stack.c !Iinclude/net/wimax.h -!Iinclude/linux/wimax.h +!Iinclude/uapi/linux/wimax.h diff --git a/Documentation/aoe/aoe.txt b/Documentation/aoe/aoe.txt index 5f5aa16047ff4f8f5a9680101572c8afc34e799c..bfc9cb19abcd56ca23f240c9854f67e0c9f3ec0f 100644 --- a/Documentation/aoe/aoe.txt +++ b/Documentation/aoe/aoe.txt @@ -1,8 +1,16 @@ -The EtherDrive (R) HOWTO for users of 2.6 kernels is found at ... +ATA over Ethernet is a network protocol that provides simple access to +block storage on the LAN. - http://www.coraid.com/SUPPORT/EtherDrive-HBA + http://support.coraid.com/documents/AoEr11.txt - It has many tips and hints! +The EtherDrive (R) HOWTO for 2.6 and 3.x kernels is found at ... + + http://support.coraid.com/support/linux/EtherDrive-2.6-HOWTO.html + +It has many tips and hints! Please see, especially, recommended +tunings for virtual memory: + + http://support.coraid.com/support/linux/EtherDrive-2.6-HOWTO-5.html#ss5.19 The aoetools are userland programs that are designed to work with this driver. The aoetools are on sourceforge. @@ -23,20 +31,12 @@ CREATING DEVICE NODES There is a udev-install.sh script that shows how to install these rules on your system. - If you are not using udev, two scripts are provided in - Documentation/aoe as examples of static device node creation for - using the aoe driver. - - rm -rf /dev/etherd - sh Documentation/aoe/mkdevs.sh /dev/etherd - - ... or to make just one shelf's worth of block device nodes ... - - sh Documentation/aoe/mkshelf.sh /dev/etherd 0 - There is also an autoload script that shows how to edit /etc/modprobe.d/aoe.conf to ensure that the aoe module is loaded when - necessary. + necessary. Preloading the aoe module is preferable to autoloading, + however, because AoE discovery takes a few seconds. It can be + confusing when an AoE device is not present the first time the a + command is run but appears a second later. USING DEVICE NODES @@ -51,9 +51,9 @@ USING DEVICE NODES "echo > /dev/etherd/discover" tells the driver to find out what AoE devices are available. - These character devices may disappear and be replaced by sysfs - counterparts. Using the commands in aoetools insulates users from - these implementation details. + In the future these character devices may disappear and be replaced + by sysfs counterparts. Using the commands in aoetools insulates + users from these implementation details. The block devices are named like this: @@ -76,8 +76,8 @@ USING SYSFS The netif attribute is the network interface on the localhost through which we are communicating with the remote AoE device. - There is a script in this directory that formats this information - in a convenient way. Users with aoetools can use the aoe-stat + There is a script in this directory that formats this information in + a convenient way. Users with aoetools should use the aoe-stat command. root@makki root# sh Documentation/aoe/status.sh @@ -121,3 +121,21 @@ DRIVER OPTIONS usage example for the module parameter. modprobe aoe_iflist="eth1 eth3" + + The aoe_deadsecs module parameter determines the maximum number of + seconds that the driver will wait for an AoE device to provide a + response to an AoE command. After aoe_deadsecs seconds have + elapsed, the AoE device will be marked as "down". + + The aoe_maxout module parameter has a default of 128. This is the + maximum number of unresponded packets that will be sent to an AoE + target at one time. + + The aoe_dyndevs module parameter defaults to 1, meaning that the + driver will assign a block device minor number to a discovered AoE + target based on the order of its discovery. With dynamic minor + device numbers in use, a greater range of AoE shelf and slot + addresses can be supported. Users with udev will never have to + think about minor numbers. Using aoe_dyndevs=0 allows device nodes + to be pre-created using a static minor-number scheme with the + aoe-mkshelf script in the aoetools. diff --git a/Documentation/aoe/mkdevs.sh b/Documentation/aoe/mkdevs.sh deleted file mode 100644 index 44c0ab7024328d4229ef7609c2ae34aa4e730a1f..0000000000000000000000000000000000000000 --- a/Documentation/aoe/mkdevs.sh +++ /dev/null @@ -1,41 +0,0 @@ -#!/bin/sh - -n_shelves=${n_shelves:-10} -n_partitions=${n_partitions:-16} - -if test "$#" != "1"; then - echo "Usage: sh `basename $0` {dir}" 1>&2 - echo " n_partitions=16 sh `basename $0` {dir}" 1>&2 - exit 1 -fi -dir=$1 - -MAJOR=152 - -echo "Creating AoE devnode files in $dir ..." - -set -e - -mkdir -p $dir - -# (Status info is in sysfs. See status.sh.) -# rm -f $dir/stat -# mknod -m 0400 $dir/stat c $MAJOR 1 -rm -f $dir/err -mknod -m 0400 $dir/err c $MAJOR 2 -rm -f $dir/discover -mknod -m 0200 $dir/discover c $MAJOR 3 -rm -f $dir/interfaces -mknod -m 0200 $dir/interfaces c $MAJOR 4 -rm -f $dir/revalidate -mknod -m 0200 $dir/revalidate c $MAJOR 5 -rm -f $dir/flush -mknod -m 0200 $dir/flush c $MAJOR 6 - -export n_partitions -mkshelf=`echo $0 | sed 's!mkdevs!mkshelf!'` -i=0 -while test $i -lt $n_shelves; do - sh -xc "sh $mkshelf $dir $i" - i=`expr $i + 1` -done diff --git a/Documentation/aoe/mkshelf.sh b/Documentation/aoe/mkshelf.sh deleted file mode 100644 index 32615814271cce1f90e6be56d5a26eb15c12de3d..0000000000000000000000000000000000000000 --- a/Documentation/aoe/mkshelf.sh +++ /dev/null @@ -1,28 +0,0 @@ -#! /bin/sh - -if test "$#" != "2"; then - echo "Usage: sh `basename $0` {dir} {shelfaddress}" 1>&2 - echo " n_partitions=16 sh `basename $0` {dir} {shelfaddress}" 1>&2 - exit 1 -fi -n_partitions=${n_partitions:-16} -dir=$1 -shelf=$2 -nslots=16 -maxslot=`echo $nslots 1 - p | dc` -MAJOR=152 - -set -e - -minor=`echo $nslots \* $shelf \* $n_partitions | bc` -endp=`echo $n_partitions - 1 | bc` -for slot in `seq 0 $maxslot`; do - for part in `seq 0 $endp`; do - name=e$shelf.$slot - test "$part" != "0" && name=${name}p$part - rm -f $dir/$name - mknod -m 0660 $dir/$name b $MAJOR $minor - - minor=`expr $minor + 1` - done -done diff --git a/Documentation/aoe/status.sh b/Documentation/aoe/status.sh index 751f3be514b831296b038fd343443c15d0aa5b32..eeec7baae57a8f3db9a0da1583c0e3c8e0e8408d 100644 --- a/Documentation/aoe/status.sh +++ b/Documentation/aoe/status.sh @@ -1,5 +1,8 @@ #! /bin/sh # collate and present sysfs information about AoE storage +# +# A more complete version of this script is aoe-stat, in the +# aoetools. set -e format="%8s\t%8s\t%8s\n" diff --git a/Documentation/arm/Booting b/Documentation/arm/Booting index a341d87d276eb1bf3904aec38896f87174b36561..0c1f475fdf36e140d28bcdc26d880546f8a8bdc4 100644 --- a/Documentation/arm/Booting +++ b/Documentation/arm/Booting @@ -154,13 +154,33 @@ In either case, the following conditions must be met: - CPU mode All forms of interrupts must be disabled (IRQs and FIQs) - The CPU must be in SVC mode. (A special exception exists for Angel) + + For CPUs which do not include the ARM virtualization extensions, the + CPU must be in SVC mode. (A special exception exists for Angel) + + CPUs which include support for the virtualization extensions can be + entered in HYP mode in order to enable the kernel to make full use of + these extensions. This is the recommended boot method for such CPUs, + unless the virtualisations are already in use by a pre-installed + hypervisor. + + If the kernel is not entered in HYP mode for any reason, it must be + entered in SVC mode. - Caches, MMUs The MMU must be off. Instruction cache may be on or off. Data cache must be off. + If the kernel is entered in HYP mode, the above requirements apply to + the HYP mode configuration in addition to the ordinary PL1 (privileged + kernel modes) configuration. In addition, all traps into the + hypervisor must be disabled, and PL1 access must be granted for all + peripherals and CPU resources for which this is architecturally + possible. Except for entering in HYP mode, the system configuration + should be such that a kernel which does not include support for the + virtualization extensions can boot correctly without extra help. + - The boot loader is expected to call the kernel image by jumping directly to the first instruction of the kernel image. diff --git a/Documentation/block/biodoc.txt b/Documentation/block/biodoc.txt index e418dc0a7086631488963786f9ddb0f3d897b147..8df5e8e6dceba06846042d0c6155fd4e986addd8 100644 --- a/Documentation/block/biodoc.txt +++ b/Documentation/block/biodoc.txt @@ -465,7 +465,6 @@ struct bio { bio_end_io_t *bi_end_io; /* bi_end_io (bio) */ atomic_t bi_cnt; /* pin count: free when it hits zero */ void *bi_private; - bio_destructor_t *bi_destructor; /* bi_destructor (bio) */ }; With this multipage bio design: @@ -647,10 +646,6 @@ for a non-clone bio. There are the 6 pools setup for different size biovecs, so bio_alloc(gfp_mask, nr_iovecs) will allocate a vec_list of the given size from these slabs. -The bi_destructor() routine takes into account the possibility of the bio -having originated from a different source (see later discussions on -n/w to block transfers and kvec_cb) - The bio_get() routine may be used to hold an extra reference on a bio prior to i/o submission, if the bio fields are likely to be accessed after the i/o is issued (since the bio may otherwise get freed in case i/o completion diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index 4372e6b8a353f3dce002ac32b84b6dd3b53a8e31..c07f7b4fb88d162ad012e69a3d77aa90d62868ff 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -18,16 +18,16 @@ from the rest of the system. The article on LWN [12] mentions some probable uses of the memory controller. The memory controller can be used to a. Isolate an application or a group of applications - Memory hungry applications can be isolated and limited to a smaller + Memory-hungry applications can be isolated and limited to a smaller amount of memory. -b. Create a cgroup with limited amount of memory, this can be used +b. Create a cgroup with a limited amount of memory; this can be used as a good alternative to booting with mem=XXXX. c. Virtualization solutions can control the amount of memory they want to assign to a virtual machine instance. d. A CD/DVD burner could control the amount of memory used by the rest of the system to ensure that burning does not fail due to lack of available memory. -e. There are several other use cases, find one or use the controller just +e. There are several other use cases; find one or use the controller just for fun (to learn and hack on the VM subsystem). Current Status: linux-2.6.34-mmotm(development version of 2010/April) @@ -38,12 +38,12 @@ Features: - optionally, memory+swap usage can be accounted and limited. - hierarchical accounting - soft limit - - moving(recharging) account at moving a task is selectable. + - moving (recharging) account at moving a task is selectable. - usage threshold notifier - oom-killer disable knob and oom-notifier - Root cgroup has no limit controls. - Kernel memory support is work in progress, and the current version provides + Kernel memory support is a work in progress, and the current version provides basically functionality. (See Section 2.7) Brief summary of control files. @@ -144,9 +144,9 @@ Figure 1 shows the important aspects of the controller 3. Each page has a pointer to the page_cgroup, which in turn knows the cgroup it belongs to -The accounting is done as follows: mem_cgroup_charge() is invoked to setup +The accounting is done as follows: mem_cgroup_charge() is invoked to set up the necessary data structures and check if the cgroup that is being charged -is over its limit. If it is then reclaim is invoked on the cgroup. +is over its limit. If it is, then reclaim is invoked on the cgroup. More details can be found in the reclaim section of this document. If everything goes well, a page meta-data-structure called page_cgroup is updated. page_cgroup has its own LRU on cgroup. @@ -163,13 +163,13 @@ for earlier. A file page will be accounted for as Page Cache when it's inserted into inode (radix-tree). While it's mapped into the page tables of processes, duplicate accounting is carefully avoided. -A RSS page is unaccounted when it's fully unmapped. A PageCache page is +An RSS page is unaccounted when it's fully unmapped. A PageCache page is unaccounted when it's removed from radix-tree. Even if RSS pages are fully unmapped (by kswapd), they may exist as SwapCache in the system until they -are really freed. Such SwapCaches also also accounted. +are really freed. Such SwapCaches are also accounted. A swapped-in page is not accounted until it's mapped. -Note: The kernel does swapin-readahead and read multiple swaps at once. +Note: The kernel does swapin-readahead and reads multiple swaps at once. This means swapped-in pages may contain pages for other tasks than a task causing page fault. So, we avoid accounting at swap-in I/O. @@ -209,7 +209,7 @@ memsw.limit_in_bytes. Example: Assume a system with 4G of swap. A task which allocates 6G of memory (by mistake) under 2G memory limitation will use all swap. In this case, setting memsw.limit_in_bytes=3G will prevent bad use of swap. -By using memsw limit, you can avoid system OOM which can be caused by swap +By using the memsw limit, you can avoid system OOM which can be caused by swap shortage. * why 'memory+swap' rather than swap. @@ -217,7 +217,7 @@ The global LRU(kswapd) can swap out arbitrary pages. Swap-out means to move account from memory to swap...there is no change in usage of memory+swap. In other words, when we want to limit the usage of swap without affecting global LRU, memory+swap limit is better than just limiting swap from -OS point of view. +an OS point of view. * What happens when a cgroup hits memory.memsw.limit_in_bytes When a cgroup hits memory.memsw.limit_in_bytes, it's useless to do swap-out @@ -236,7 +236,7 @@ an OOM routine is invoked to select and kill the bulkiest task in the cgroup. (See 10. OOM Control below.) The reclaim algorithm has not been modified for cgroups, except that -pages that are selected for reclaiming come from the per cgroup LRU +pages that are selected for reclaiming come from the per-cgroup LRU list. NOTE: Reclaim does not work for the root cgroup, since we cannot set any @@ -316,7 +316,7 @@ We can check the usage: # cat /sys/fs/cgroup/memory/0/memory.usage_in_bytes 1216512 -A successful write to this file does not guarantee a successful set of +A successful write to this file does not guarantee a successful setting of this limit to the value written into the file. This can be due to a number of factors, such as rounding up to page boundaries or the total availability of memory on the system. The user is required to re-read @@ -350,7 +350,7 @@ Trying usual test under memory controller is always helpful. 4.1 Troubleshooting Sometimes a user might find that the application under a cgroup is -terminated by OOM killer. There are several causes for this: +terminated by the OOM killer. There are several causes for this: 1. The cgroup limit is too low (just too low to do anything useful) 2. The user is using anonymous memory and swap is turned off or too low @@ -358,7 +358,7 @@ terminated by OOM killer. There are several causes for this: A sync followed by echo 1 > /proc/sys/vm/drop_caches will help get rid of some of the pages cached in the cgroup (page cache pages). -To know what happens, disable OOM_Kill by 10. OOM Control(see below) and +To know what happens, disabling OOM_Kill as per "10. OOM Control" (below) and seeing what happens will be helpful. 4.2 Task migration @@ -399,10 +399,10 @@ About use_hierarchy, see Section 6. Almost all pages tracked by this memory cgroup will be unmapped and freed. Some pages cannot be freed because they are locked or in-use. Such pages are - moved to parent(if use_hierarchy==1) or root (if use_hierarchy==0) and this + moved to parent (if use_hierarchy==1) or root (if use_hierarchy==0) and this cgroup will be empty. - Typical use case of this interface is that calling this before rmdir(). + The typical use case for this interface is before calling rmdir(). Because rmdir() moves all pages to parent, some out-of-use page caches can be moved to the parent. If you want to avoid that, force_empty will be useful. @@ -486,7 +486,7 @@ You can reset failcnt by writing 0 to failcnt file. For efficiency, as other kernel components, memory cgroup uses some optimization to avoid unnecessary cacheline false sharing. usage_in_bytes is affected by the -method and doesn't show 'exact' value of memory(and swap) usage, it's an fuzz +method and doesn't show 'exact' value of memory (and swap) usage, it's a fuzz value for efficient access. (Of course, when necessary, it's synchronized.) If you want to know more exact memory usage, you should use RSS+CACHE(+SWAP) value in memory.stat(see 5.2). @@ -496,8 +496,8 @@ value in memory.stat(see 5.2). This is similar to numa_maps but operates on a per-memcg basis. This is useful for providing visibility into the numa locality information within an memcg since the pages are allowed to be allocated from any physical -node. One of the usecases is evaluating application performance by -combining this information with the application's cpu allocation. +node. One of the use cases is evaluating application performance by +combining this information with the application's CPU allocation. We export "total", "file", "anon" and "unevictable" pages per-node for each memcg. The ouput format of memory.numa_stat is: @@ -561,10 +561,10 @@ are pushed back to their soft limits. If the soft limit of each control group is very high, they are pushed back as much as possible to make sure that one control group does not starve the others of memory. -Please note that soft limits is a best effort feature, it comes with +Please note that soft limits is a best-effort feature; it comes with no guarantees, but it does its best to make sure that when memory is heavily contended for, memory is allocated based on the soft limit -hints/setup. Currently soft limit based reclaim is setup such that +hints/setup. Currently soft limit based reclaim is set up such that it gets invoked from balance_pgdat (kswapd). 7.1 Interface @@ -592,7 +592,7 @@ page tables. 8.1 Interface -This feature is disabled by default. It can be enabled(and disabled again) by +This feature is disabled by default. It can be enabledi (and disabled again) by writing to memory.move_charge_at_immigrate of the destination cgroup. If you want to enable it: @@ -601,8 +601,8 @@ If you want to enable it: Note: Each bits of move_charge_at_immigrate has its own meaning about what type of charges should be moved. See 8.2 for details. -Note: Charges are moved only when you move mm->owner, IOW, a leader of a thread - group. +Note: Charges are moved only when you move mm->owner, in other words, + a leader of a thread group. Note: If we cannot find enough space for the task in the destination cgroup, we try to make space by reclaiming memory. Task migration may fail if we cannot make enough space. @@ -612,25 +612,25 @@ And if you want disable it again: # echo 0 > memory.move_charge_at_immigrate -8.2 Type of charges which can be move +8.2 Type of charges which can be moved -Each bits of move_charge_at_immigrate has its own meaning about what type of -charges should be moved. But in any cases, it must be noted that an account of -a page or a swap can be moved only when it is charged to the task's current(old) -memory cgroup. +Each bit in move_charge_at_immigrate has its own meaning about what type of +charges should be moved. But in any case, it must be noted that an account of +a page or a swap can be moved only when it is charged to the task's current +(old) memory cgroup. bit | what type of charges would be moved ? -----+------------------------------------------------------------------------ - 0 | A charge of an anonymous page(or swap of it) used by the target task. - | You must enable Swap Extension(see 2.4) to enable move of swap charges. + 0 | A charge of an anonymous page (or swap of it) used by the target task. + | You must enable Swap Extension (see 2.4) to enable move of swap charges. -----+------------------------------------------------------------------------ - 1 | A charge of file pages(normal file, tmpfs file(e.g. ipc shared memory) + 1 | A charge of file pages (normal file, tmpfs file (e.g. ipc shared memory) | and swaps of tmpfs file) mmapped by the target task. Unlike the case of - | anonymous pages, file pages(and swaps) in the range mmapped by the task + | anonymous pages, file pages (and swaps) in the range mmapped by the task | will be moved even if the task hasn't done page fault, i.e. they might | not be the task's "RSS", but other task's "RSS" that maps the same file. - | And mapcount of the page is ignored(the page can be moved even if - | page_mapcount(page) > 1). You must enable Swap Extension(see 2.4) to + | And mapcount of the page is ignored (the page can be moved even if + | page_mapcount(page) > 1). You must enable Swap Extension (see 2.4) to | enable move of swap charges. 8.3 TODO @@ -640,11 +640,11 @@ memory cgroup. 9. Memory thresholds -Memory cgroup implements memory thresholds using cgroups notification +Memory cgroup implements memory thresholds using the cgroups notification API (see cgroups.txt). It allows to register multiple memory and memsw thresholds and gets notifications when it crosses. -To register a threshold application need: +To register a threshold, an application must: - create an eventfd using eventfd(2); - open memory.usage_in_bytes or memory.memsw.usage_in_bytes; - write string like " " to @@ -659,24 +659,24 @@ It's applicable for root and non-root cgroup. memory.oom_control file is for OOM notification and other controls. -Memory cgroup implements OOM notifier using cgroup notification +Memory cgroup implements OOM notifier using the cgroup notification API (See cgroups.txt). It allows to register multiple OOM notification delivery and gets notification when OOM happens. -To register a notifier, application need: +To register a notifier, an application must: - create an eventfd using eventfd(2) - open memory.oom_control file - write string like " " to cgroup.event_control -Application will be notified through eventfd when OOM happens. -OOM notification doesn't work for root cgroup. +The application will be notified through eventfd when OOM happens. +OOM notification doesn't work for the root cgroup. -You can disable OOM-killer by writing "1" to memory.oom_control file, as: +You can disable the OOM-killer by writing "1" to memory.oom_control file, as: #echo 1 > memory.oom_control -This operation is only allowed to the top cgroup of sub-hierarchy. +This operation is only allowed to the top cgroup of a sub-hierarchy. If OOM-killer is disabled, tasks under cgroup will hang/sleep in memory cgroup's OOM-waitqueue when they request accountable memory. diff --git a/Documentation/cpu-freq/boost.txt b/Documentation/cpu-freq/boost.txt new file mode 100644 index 0000000000000000000000000000000000000000..9b4edfcf486f83c4f20b711104593865d1050449 --- /dev/null +++ b/Documentation/cpu-freq/boost.txt @@ -0,0 +1,93 @@ +Processor boosting control + + - information for users - + +Quick guide for the impatient: +-------------------- +/sys/devices/system/cpu/cpufreq/boost +controls the boost setting for the whole system. You can read and write +that file with either "0" (boosting disabled) or "1" (boosting allowed). +Reading or writing 1 does not mean that the system is boosting at this +very moment, but only that the CPU _may_ raise the frequency at it's +discretion. +-------------------- + +Introduction +------------- +Some CPUs support a functionality to raise the operating frequency of +some cores in a multi-core package if certain conditions apply, mostly +if the whole chip is not fully utilized and below it's intended thermal +budget. This is done without operating system control by a combination +of hardware and firmware. +On Intel CPUs this is called "Turbo Boost", AMD calls it "Turbo-Core", +in technical documentation "Core performance boost". In Linux we use +the term "boost" for convenience. + +Rationale for disable switch +---------------------------- + +Though the idea is to just give better performance without any user +intervention, sometimes the need arises to disable this functionality. +Most systems offer a switch in the (BIOS) firmware to disable the +functionality at all, but a more fine-grained and dynamic control would +be desirable: +1. While running benchmarks, reproducible results are important. Since + the boosting functionality depends on the load of the whole package, + single thread performance can vary. By explicitly disabling the boost + functionality at least for the benchmark's run-time the system will run + at a fixed frequency and results are reproducible again. +2. To examine the impact of the boosting functionality it is helpful + to do tests with and without boosting. +3. Boosting means overclocking the processor, though under controlled + conditions. By raising the frequency and the voltage the processor + will consume more power than without the boosting, which may be + undesirable for instance for mobile users. Disabling boosting may + save power here, though this depends on the workload. + + +User controlled switch +---------------------- + +To allow the user to toggle the boosting functionality, the acpi-cpufreq +driver exports a sysfs knob to disable it. There is a file: +/sys/devices/system/cpu/cpufreq/boost +which can either read "0" (boosting disabled) or "1" (boosting enabled). +Reading the file is always supported, even if the processor does not +support boosting. In this case the file will be read-only and always +reads as "0". Explicitly changing the permissions and writing to that +file anyway will return EINVAL. + +On supported CPUs one can write either a "0" or a "1" into this file. +This will either disable the boost functionality on all cores in the +whole system (0) or will allow the hardware to boost at will (1). + +Writing a "1" does not explicitly boost the system, but just allows the +CPU (and the firmware) to boost at their discretion. Some implementations +take external factors like the chip's temperature into account, so +boosting once does not necessarily mean that it will occur every time +even using the exact same software setup. + + +AMD legacy cpb switch +--------------------- +The AMD powernow-k8 driver used to support a very similar switch to +disable or enable the "Core Performance Boost" feature of some AMD CPUs. +This switch was instantiated in each CPU's cpufreq directory +(/sys/devices/system/cpu[0-9]*/cpufreq) and was called "cpb". +Though the per CPU existence hints at a more fine grained control, the +actual implementation only supported a system-global switch semantics, +which was simply reflected into each CPU's file. Writing a 0 or 1 into it +would pull the other CPUs to the same state. +For compatibility reasons this file and its behavior is still supported +on AMD CPUs, though it is now protected by a config switch +(X86_ACPI_CPUFREQ_CPB). On Intel CPUs this file will never be created, +even with the config option set. +This functionality is considered legacy and will be removed in some future +kernel version. + +More fine grained boosting control +---------------------------------- + +Technically it is possible to switch the boosting functionality at least +on a per package basis, for some CPUs even per core. Currently the driver +does not support it, but this may be implemented in the future. diff --git a/Documentation/cpuidle/sysfs.txt b/Documentation/cpuidle/sysfs.txt index 9d28a3406e745589383021732fe7941ed9aad1cb..b6f44f490ed7839f0963acfc0c53ed2537fa35e2 100644 --- a/Documentation/cpuidle/sysfs.txt +++ b/Documentation/cpuidle/sysfs.txt @@ -76,9 +76,17 @@ total 0 * desc : Small description about the idle state (string) -* disable : Option to disable this idle state (bool) +* disable : Option to disable this idle state (bool) -> see note below * latency : Latency to exit out of this idle state (in microseconds) * name : Name of the idle state (string) * power : Power consumed while in this idle state (in milliwatts) * time : Total time spent in this idle state (in microseconds) * usage : Number of times this state was entered (count) + +Note: +The behavior and the effect of the disable variable depends on the +implementation of a particular governor. In the ladder governor, for +example, it is not coherent, i.e. if one is disabling a light state, +then all deeper states are disabled as well, but the disable variable +does not reflect it. Likewise, if one enables a deep state but a lighter +state still is disabled, then this has no effect. diff --git a/Documentation/crypto/asymmetric-keys.txt b/Documentation/crypto/asymmetric-keys.txt new file mode 100644 index 0000000000000000000000000000000000000000..b7675904a7478a4d52fc2d23b4157adcdd132761 --- /dev/null +++ b/Documentation/crypto/asymmetric-keys.txt @@ -0,0 +1,312 @@ + ============================================= + ASYMMETRIC / PUBLIC-KEY CRYPTOGRAPHY KEY TYPE + ============================================= + +Contents: + + - Overview. + - Key identification. + - Accessing asymmetric keys. + - Signature verification. + - Asymmetric key subtypes. + - Instantiation data parsers. + + +======== +OVERVIEW +======== + +The "asymmetric" key type is designed to be a container for the keys used in +public-key cryptography, without imposing any particular restrictions on the +form or mechanism of the cryptography or form of the key. + +The asymmetric key is given a subtype that defines what sort of data is +associated with the key and provides operations to describe and destroy it. +However, no requirement is made that the key data actually be stored in the +key. + +A completely in-kernel key retention and operation subtype can be defined, but +it would also be possible to provide access to cryptographic hardware (such as +a TPM) that might be used to both retain the relevant key and perform +operations using that key. In such a case, the asymmetric key would then +merely be an interface to the TPM driver. + +Also provided is the concept of a data parser. Data parsers are responsible +for extracting information from the blobs of data passed to the instantiation +function. The first data parser that recognises the blob gets to set the +subtype of the key and define the operations that can be done on that key. + +A data parser may interpret the data blob as containing the bits representing a +key, or it may interpret it as a reference to a key held somewhere else in the +system (for example, a TPM). + + +================== +KEY IDENTIFICATION +================== + +If a key is added with an empty name, the instantiation data parsers are given +the opportunity to pre-parse a key and to determine the description the key +should be given from the content of the key. + +This can then be used to refer to the key, either by complete match or by +partial match. The key type may also use other criteria to refer to a key. + +The asymmetric key type's match function can then perform a wider range of +comparisons than just the straightforward comparison of the description with +the criterion string: + + (1) If the criterion string is of the form "id:" then the match + function will examine a key's fingerprint to see if the hex digits given + after the "id:" match the tail. For instance: + + keyctl search @s asymmetric id:5acc2142 + + will match a key with fingerprint: + + 1A00 2040 7601 7889 DE11 882C 3823 04AD 5ACC 2142 + + (2) If the criterion string is of the form ":" then the + match will match the ID as in (1), but with the added restriction that + only keys of the specified subtype (e.g. tpm) will be matched. For + instance: + + keyctl search @s asymmetric tpm:5acc2142 + +Looking in /proc/keys, the last 8 hex digits of the key fingerprint are +displayed, along with the subtype: + + 1a39e171 I----- 1 perm 3f010000 0 0 asymmetri modsign.0: DSA 5acc2142 [] + + +========================= +ACCESSING ASYMMETRIC KEYS +========================= + +For general access to asymmetric keys from within the kernel, the following +inclusion is required: + + #include + +This gives access to functions for dealing with asymmetric / public keys. +Three enums are defined there for representing public-key cryptography +algorithms: + + enum pkey_algo + +digest algorithms used by those: + + enum pkey_hash_algo + +and key identifier representations: + + enum pkey_id_type + +Note that the key type representation types are required because key +identifiers from different standards aren't necessarily compatible. For +instance, PGP generates key identifiers by hashing the key data plus some +PGP-specific metadata, whereas X.509 has arbitrary certificate identifiers. + +The operations defined upon a key are: + + (1) Signature verification. + +Other operations are possible (such as encryption) with the same key data +required for verification, but not currently supported, and others +(eg. decryption and signature generation) require extra key data. + + +SIGNATURE VERIFICATION +---------------------- + +An operation is provided to perform cryptographic signature verification, using +an asymmetric key to provide or to provide access to the public key. + + int verify_signature(const struct key *key, + const struct public_key_signature *sig); + +The caller must have already obtained the key from some source and can then use +it to check the signature. The caller must have parsed the signature and +transferred the relevant bits to the structure pointed to by sig. + + struct public_key_signature { + u8 *digest; + u8 digest_size; + enum pkey_hash_algo pkey_hash_algo : 8; + u8 nr_mpi; + union { + MPI mpi[2]; + ... + }; + }; + +The algorithm used must be noted in sig->pkey_hash_algo, and all the MPIs that +make up the actual signature must be stored in sig->mpi[] and the count of MPIs +placed in sig->nr_mpi. + +In addition, the data must have been digested by the caller and the resulting +hash must be pointed to by sig->digest and the size of the hash be placed in +sig->digest_size. + +The function will return 0 upon success or -EKEYREJECTED if the signature +doesn't match. + +The function may also return -ENOTSUPP if an unsupported public-key algorithm +or public-key/hash algorithm combination is specified or the key doesn't +support the operation; -EBADMSG or -ERANGE if some of the parameters have weird +data; or -ENOMEM if an allocation can't be performed. -EINVAL can be returned +if the key argument is the wrong type or is incompletely set up. + + +======================= +ASYMMETRIC KEY SUBTYPES +======================= + +Asymmetric keys have a subtype that defines the set of operations that can be +performed on that key and that determines what data is attached as the key +payload. The payload format is entirely at the whim of the subtype. + +The subtype is selected by the key data parser and the parser must initialise +the data required for it. The asymmetric key retains a reference on the +subtype module. + +The subtype definition structure can be found in: + + #include + +and looks like the following: + + struct asymmetric_key_subtype { + struct module *owner; + const char *name; + + void (*describe)(const struct key *key, struct seq_file *m); + void (*destroy)(void *payload); + int (*verify_signature)(const struct key *key, + const struct public_key_signature *sig); + }; + +Asymmetric keys point to this with their type_data[0] member. + +The owner and name fields should be set to the owning module and the name of +the subtype. Currently, the name is only used for print statements. + +There are a number of operations defined by the subtype: + + (1) describe(). + + Mandatory. This allows the subtype to display something in /proc/keys + against the key. For instance the name of the public key algorithm type + could be displayed. The key type will display the tail of the key + identity string after this. + + (2) destroy(). + + Mandatory. This should free the memory associated with the key. The + asymmetric key will look after freeing the fingerprint and releasing the + reference on the subtype module. + + (3) verify_signature(). + + Optional. These are the entry points for the key usage operations. + Currently there is only the one defined. If not set, the caller will be + given -ENOTSUPP. The subtype may do anything it likes to implement an + operation, including offloading to hardware. + + +========================== +INSTANTIATION DATA PARSERS +========================== + +The asymmetric key type doesn't generally want to store or to deal with a raw +blob of data that holds the key data. It would have to parse it and error +check it each time it wanted to use it. Further, the contents of the blob may +have various checks that can be performed on it (eg. self-signatures, validity +dates) and may contain useful data about the key (identifiers, capabilities). + +Also, the blob may represent a pointer to some hardware containing the key +rather than the key itself. + +Examples of blob formats for which parsers could be implemented include: + + - OpenPGP packet stream [RFC 4880]. + - X.509 ASN.1 stream. + - Pointer to TPM key. + - Pointer to UEFI key. + +During key instantiation each parser in the list is tried until one doesn't +return -EBADMSG. + +The parser definition structure can be found in: + + #include + +and looks like the following: + + struct asymmetric_key_parser { + struct module *owner; + const char *name; + + int (*parse)(struct key_preparsed_payload *prep); + }; + +The owner and name fields should be set to the owning module and the name of +the parser. + +There is currently only a single operation defined by the parser, and it is +mandatory: + + (1) parse(). + + This is called to preparse the key from the key creation and update paths. + In particular, it is called during the key creation _before_ a key is + allocated, and as such, is permitted to provide the key's description in + the case that the caller declines to do so. + + The caller passes a pointer to the following struct with all of the fields + cleared, except for data, datalen and quotalen [see + Documentation/security/keys.txt]. + + struct key_preparsed_payload { + char *description; + void *type_data[2]; + void *payload; + const void *data; + size_t datalen; + size_t quotalen; + }; + + The instantiation data is in a blob pointed to by data and is datalen in + size. The parse() function is not permitted to change these two values at + all, and shouldn't change any of the other values _unless_ they are + recognise the blob format and will not return -EBADMSG to indicate it is + not theirs. + + If the parser is happy with the blob, it should propose a description for + the key and attach it to ->description, ->type_data[0] should be set to + point to the subtype to be used, ->payload should be set to point to the + initialised data for that subtype, ->type_data[1] should point to a hex + fingerprint and quotalen should be updated to indicate how much quota this + key should account for. + + When clearing up, the data attached to ->type_data[1] and ->description + will be kfree()'d and the data attached to ->payload will be passed to the + subtype's ->destroy() method to be disposed of. A module reference for + the subtype pointed to by ->type_data[0] will be put. + + + If the data format is not recognised, -EBADMSG should be returned. If it + is recognised, but the key cannot for some reason be set up, some other + negative error code should be returned. On success, 0 should be returned. + + The key's fingerprint string may be partially matched upon. For a + public-key algorithm such as RSA and DSA this will likely be a printable + hex version of the key's fingerprint. + +Functions are provided to register and unregister parsers: + + int register_asymmetric_key_parser(struct asymmetric_key_parser *parser); + void unregister_asymmetric_key_parser(struct asymmetric_key_parser *subtype); + +Parsers may not have the same name. The names are otherwise only used for +displaying in debugging messages. diff --git a/Documentation/device-mapper/dm-raid.txt b/Documentation/device-mapper/dm-raid.txt index 1c184495716697610d4bb41e1dde3ab60dce9e51..728c38c242d631b88117958360c6f8441a72be4b 100644 --- a/Documentation/device-mapper/dm-raid.txt +++ b/Documentation/device-mapper/dm-raid.txt @@ -132,3 +132,12 @@ Here we can see the RAID type is raid4, there are 5 devices - all of which are 'A'live, and the array is 2/490221568 complete with recovery. Faulty or missing devices are marked 'D'. Devices that are out-of-sync are marked 'a'. + + +Version History +--------------- +1.0.0 Initial version. Support for RAID 4/5/6 +1.1.0 Added support for RAID 1 +1.2.0 Handle creation of arrays that contain failed devices. +1.3.0 Added support for RAID 10 +1.3.1 Allow device replacement/rebuild for RAID 10 diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 91f26148af79ef7949605d49d8ecf85de17888c5..fc81a7d6b0f1424169f8e710770ea685d2e3c0c6 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -1,3 +1,15 @@ +ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform) +----------------------------------------------------------------------------- +ARM's oldest Linux-supported platform with connectors for different core +tiles of ARMv4, ARMv5 and ARMv6 type. + +Required properties (in root node): + compatible = "arm,integrator-ap"; /* Application Platform */ + compatible = "arm,integrator-cp"; /* Compact Platform */ + +FPGA type interrupt controllers, see the versatile-fpga-irq binding doc. + + ARM Versatile Application and Platform Baseboards ------------------------------------------------- ARM's development hardware platform with connectors for customizable diff --git a/Documentation/devicetree/bindings/arm/calxeda/combophy.txt b/Documentation/devicetree/bindings/arm/calxeda/combophy.txt new file mode 100644 index 0000000000000000000000000000000000000000..6622bdb2e8bcd2f78f3293bd6688d0ddc9f31d5f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/calxeda/combophy.txt @@ -0,0 +1,17 @@ +Calxeda Highbank Combination Phys for SATA + +Properties: +- compatible : Should be "calxeda,hb-combophy" +- #phy-cells: Should be 1. +- reg : Address and size for Combination Phy registers. +- phydev: device ID for programming the combophy. + +Example: + + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; + diff --git a/Documentation/devicetree/bindings/arm/davinci/nand.txt b/Documentation/devicetree/bindings/arm/davinci/nand.txt new file mode 100644 index 0000000000000000000000000000000000000000..e37241f1fdd85d31fcbdf338219fab719d6c4217 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/davinci/nand.txt @@ -0,0 +1,51 @@ +* Texas Instruments Davinci NAND + +This file provides information, what the device node for the +davinci nand interface contain. + +Required properties: +- compatible: "ti,davinci-nand"; +- reg : contain 2 offset/length values: + - offset and length for the access window + - offset and length for accessing the aemif control registers +- ti,davinci-chipselect: Indicates on the davinci_nand driver which + chipselect is used for accessing the nand. + +Recommended properties : +- ti,davinci-mask-ale: mask for ale +- ti,davinci-mask-cle: mask for cle +- ti,davinci-mask-chipsel: mask for chipselect +- ti,davinci-ecc-mode: ECC mode valid values for davinci driver: + - "none" + - "soft" + - "hw" +- ti,davinci-ecc-bits: used ECC bits, currently supported 1 or 4. +- ti,davinci-nand-buswidth: buswidth 8 or 16 +- ti,davinci-nand-use-bbt: use flash based bad block table support. + +Example (enbw_cmc board): +aemif@60000000 { + compatible = "ti,davinci-aemif"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x68000000 0x80000>; + ranges = <2 0 0x60000000 0x02000000 + 3 0 0x62000000 0x02000000 + 4 0 0x64000000 0x02000000 + 5 0 0x66000000 0x02000000 + 6 0 0x68000000 0x02000000>; + nand@3,0 { + compatible = "ti,davinci-nand"; + reg = <3 0x0 0x807ff + 6 0x0 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ti,davinci-chipselect = <1>; + ti,davinci-mask-ale = <0>; + ti,davinci-mask-cle = <0>; + ti,davinci-mask-chipsel = <0>; + ti,davinci-ecc-mode = "hw"; + ti,davinci-ecc-bits = <4>; + ti,davinci-nand-use-bbt; + }; +}; diff --git a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt new file mode 100644 index 0000000000000000000000000000000000000000..9989eda755d9bef56ac37048300fd2a879d66b60 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt @@ -0,0 +1,31 @@ +* ARM Versatile FPGA interrupt controller + +One or more FPGA IRQ controllers can be synthesized in an ARM reference board +such as the Integrator or Versatile family. The output of these different +controllers are OR:ed together and fed to the CPU tile's IRQ input. Each +instance can handle up to 32 interrupts. + +Required properties: +- compatible: "arm,versatile-fpga-irq" +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells: The number of cells to define the interrupts. Must be 1 + as the FPGA IRQ controller has no configuration options for interrupt + sources. The cell is a u32 and defines the interrupt number. +- reg: The register bank for the FPGA interrupt controller. +- clear-mask: a u32 number representing the mask written to clear all IRQs + on the controller at boot for example. +- valid-mask: a u32 number representing a bit mask determining which of + the interrupts are valid. Unconnected/unused lines are set to 0, and + the system till not make it possible for devices to request these + interrupts. + +Example: + +pic: pic@14000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x14000000 0x100>; + clear-mask = <0xffffffff>; + valid-mask = <0x003fffff>; +}; diff --git a/Documentation/devicetree/bindings/arm/xen.txt b/Documentation/devicetree/bindings/arm/xen.txt new file mode 100644 index 0000000000000000000000000000000000000000..0f7b9c2109f855d69b8d950675a1e8e17b836735 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/xen.txt @@ -0,0 +1,25 @@ +* Xen hypervisor device tree bindings + +Xen ARM virtual platforms shall have a top-level "hypervisor" node with +the following properties: + +- compatible: + compatible = "xen,xen-", "xen,xen"; + where is the version of the Xen ABI of the platform. + +- reg: specifies the base physical address and size of a region in + memory where the grant table should be mapped to, using an + HYPERVISOR_memory_op hypercall. The memory region is large enough to map + the whole grant table (it is larger or equal to gnttab_max_grant_frames()). + +- interrupts: the interrupt used by Xen to inject event notifications. + A GIC node is also required. + + +Example (assuming #address-cells = <2> and #size-cells = <2>): + +hypervisor { + compatible = "xen,xen-4.3", "xen,xen"; + reg = <0 0xb0000000 0 0x20000>; + interrupts = <1 15 0xf08>; +}; diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt index 8bb8a76d42e8c1b9cad1de552d8639045a204992..b519f9b699c30eec22d99b7398691b3b80c4c7a3 100644 --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt @@ -8,9 +8,18 @@ Required properties: - interrupts : - reg : +Optional properties: +- calxeda,port-phys: phandle-combophy and lane assignment, which maps each + SATA port to a combophy and a lane within that + combophy +- dma-coherent : Present if dma operations are coherent + Example: sata@ffe08000 { compatible = "calxeda,hb-ahci"; reg = <0xffe08000 0x1000>; interrupts = <115>; + calxeda,port-phys = <&combophy5 0 &combophy0 0 &combophy0 1 + &combophy0 2 &combophy0 3>; + }; diff --git a/Documentation/devicetree/bindings/ata/pata-arasan.txt b/Documentation/devicetree/bindings/ata/pata-arasan.txt new file mode 100644 index 0000000000000000000000000000000000000000..95ec7f825ede7290d520e0ce4d4b06e462a5b208 --- /dev/null +++ b/Documentation/devicetree/bindings/ata/pata-arasan.txt @@ -0,0 +1,17 @@ +* ARASAN PATA COMPACT FLASH CONTROLLER + +Required properties: +- compatible: "arasan,cf-spear1340" +- reg: Address range of the CF registers +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- interrupt: Should contain the CF interrupt number + +Example: + + cf@fc000000 { + compatible = "arasan,cf-spear1340"; + reg = <0xfc000000 0x1000>; + interrupt-parent = <&vic1>; + interrupts = <12>; + }; diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt new file mode 100644 index 0000000000000000000000000000000000000000..4416ccc33472c2cb270afe45ab201a5916e6a8cc --- /dev/null +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt @@ -0,0 +1,55 @@ +Generic CPU0 cpufreq driver + +It is a generic cpufreq driver for CPU0 frequency management. It +supports both uniprocessor (UP) and symmetric multiprocessor (SMP) +systems which share clock and voltage across all CPUs. + +Both required and optional properties listed below must be defined +under node /cpus/cpu@0. + +Required properties: +- operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt + for details + +Optional properties: +- clock-latency: Specify the possible maximum transition latency for clock, + in unit of nanoseconds. +- voltage-tolerance: Specify the CPU voltage tolerance in percentage. + +Examples: + +cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; + transition-latency = <61036>; /* two CLK32 periods */ + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + reg = <1>; + next-level-cache = <&L2>; + }; + + cpu@2 { + compatible = "arm,cortex-a9"; + reg = <2>; + next-level-cache = <&L2>; + }; + + cpu@3 { + compatible = "arm,cortex-a9"; + reg = <3>; + next-level-cache = <&L2>; + }; +}; diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt index bf57ecd5d73a6218d1310da2695f4bb977710e57..bd7ce120bc135e9eccb9f2cbdb3a38fdc15f9702 100644 --- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt +++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt @@ -9,6 +9,7 @@ Copyright (C) 2008-2011 Freescale Semiconductor Inc. -Run Time Integrity Check (RTIC) Node -Run Time Integrity Check (RTIC) Memory Node -Secure Non-Volatile Storage (SNVS) Node + -Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node -Full Example NOTE: the SEC 4 is also known as Freescale's Cryptographic Accelerator @@ -294,6 +295,27 @@ Secure Non-Volatile Storage (SNVS) Node address and length of the SEC4 configuration registers. + - #address-cells + Usage: required + Value type: + Definition: A standard property. Defines the number of cells + for representing physical addresses in child nodes. Must + have a value of 1. + + - #size-cells + Usage: required + Value type: + Definition: A standard property. Defines the number of cells + for representing the size of physical addresses in + child nodes. Must have a value of 1. + + - ranges + Usage: required + Value type: + Definition: A standard property. Specifies the physical address + range of the SNVS register space. A triplet that includes + the child address, parent address, & length. + - interrupts Usage: required Value type: @@ -314,10 +336,33 @@ EXAMPLE sec_mon@314000 { compatible = "fsl,sec-v4.0-mon"; reg = <0x314000 0x1000>; + ranges = <0 0x314000 0x1000>; interrupt-parent = <&mpic>; interrupts = <93 2>; }; +===================================================================== +Secure Non-Volatile Storage (SNVS) Low Power (LP) RTC Node + + A SNVS child node that defines SNVS LP RTC. + + - compatible + Usage: required + Value type: + Definition: Must include "fsl,sec-v4.0-mon-rtc-lp". + + - reg + Usage: required + Value type: + Definition: A standard property. Specifies the physical + address and length of the SNVS LP configuration registers. + +EXAMPLE + sec_mon_rtc_lp@314000 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + }; + ===================================================================== FULL EXAMPLE @@ -390,8 +435,14 @@ FULL EXAMPLE sec_mon: sec_mon@314000 { compatible = "fsl,sec-v4.0-mon"; reg = <0x314000 0x1000>; + ranges = <0 0x314000 0x1000>; interrupt-parent = <&mpic>; interrupts = <93 2>; + + sec_mon_rtc_lp@34 { + compatible = "fsl,sec-v4.0-mon-rtc-lp"; + reg = <0x34 0x58>; + }; }; ===================================================================== diff --git a/Documentation/devicetree/bindings/crypto/mv_cesa.txt b/Documentation/devicetree/bindings/crypto/mv_cesa.txt new file mode 100644 index 0000000000000000000000000000000000000000..47229b1a594b2479e62bf073128ee0b43476159b --- /dev/null +++ b/Documentation/devicetree/bindings/crypto/mv_cesa.txt @@ -0,0 +1,20 @@ +Marvell Cryptographic Engines And Security Accelerator + +Required properties: +- compatible : should be "marvell,orion-crypto" +- reg : base physical address of the engine and length of memory mapped + region, followed by base physical address of sram and its memory + length +- reg-names : "regs" , "sram"; +- interrupts : interrupt number + +Examples: + + crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0x4000000 0x800>; + reg-names = "regs" , "sram"; + interrupts = <22>; + status = "okay"; + }; diff --git a/Documentation/devicetree/bindings/dma/arm-pl330.txt b/Documentation/devicetree/bindings/dma/arm-pl330.txt index a4cd273b2a679d0d5c4952d6a576149658570cdd..36e27d54260b37ddde16669c0294474026084b7b 100644 --- a/Documentation/devicetree/bindings/dma/arm-pl330.txt +++ b/Documentation/devicetree/bindings/dma/arm-pl330.txt @@ -9,6 +9,9 @@ Required properties: region. - interrupts: interrupt number to the cpu. +Optional properties: +- dma-coherent : Present if dma operations are coherent + Example: pdma0: pdma@12680000 { diff --git a/Documentation/devicetree/bindings/gpio/gpio-fan.txt b/Documentation/devicetree/bindings/gpio/gpio-fan.txt new file mode 100644 index 0000000000000000000000000000000000000000..2dd457a3469af94baa89534c79aaacdf56e2d75e --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-fan.txt @@ -0,0 +1,25 @@ +Bindings for fan connected to GPIO lines + +Required properties: +- compatible : "gpio-fan" +- gpios: Specifies the pins that map to bits in the control value, + ordered MSB-->LSB. +- gpio-fan,speed-map: A mapping of possible fan RPM speeds and the + control value that should be set to achieve them. This array + must have the RPM values in ascending order. + +Optional properties: +- alarm-gpios: This pin going active indicates something is wrong with + the fan, and a udev event will be fired. + +Examples: + + gpio_fan { + compatible = "gpio-fan"; + gpios = <&gpio1 14 1 + &gpio1 13 1>; + gpio-fan,speed-map = <0 0 + 3000 1 + 6000 2>; + alarm-gpios = <&gpio1 15 1>; + }; diff --git a/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt new file mode 100644 index 0000000000000000000000000000000000000000..a6f3bec1da7d0f46d6f0ecf22fcec20232b354dc --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-mvebu.txt @@ -0,0 +1,53 @@ +* Marvell EBU GPIO controller + +Required properties: + +- compatible : Should be "marvell,orion-gpio", "marvell,mv78200-gpio" + or "marvell,armadaxp-gpio". "marvell,orion-gpio" should be used for + Orion, Kirkwood, Dove, Discovery (except MV78200) and Armada + 370. "marvell,mv78200-gpio" should be used for the Discovery + MV78200. "marvel,armadaxp-gpio" should be used for all Armada XP + SoCs (MV78230, MV78260, MV78460). + +- reg: Address and length of the register set for the device. Only one + entry is expected, except for the "marvell,armadaxp-gpio" variant + for which two entries are expected: one for the general registers, + one for the per-cpu registers. + +- interrupts: The list of interrupts that are used for all the pins + managed by this GPIO bank. There can be more than one interrupt + (example: 1 interrupt per 8 pins on Armada XP, which means 4 + interrupts per bank of 32 GPIOs). + +- interrupt-controller: identifies the node as an interrupt controller + +- #interrupt-cells: specifies the number of cells needed to encode an + interrupt source. Should be two. + The first cell is the GPIO number. + The second cell is used to specify flags: + bits[3:0] trigger type and level flags: + 1 = low-to-high edge triggered. + 2 = high-to-low edge triggered. + 4 = active high level-sensitive. + 8 = active low level-sensitive. + +- gpio-controller: marks the device node as a gpio controller + +- ngpios: number of GPIOs this controller has + +- #gpio-cells: Should be two. The first cell is the pin number. The + second cell is reserved for flags, unused at the moment. + +Example: + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; diff --git a/Documentation/devicetree/bindings/i2c/atmel-i2c.txt b/Documentation/devicetree/bindings/i2c/atmel-i2c.txt new file mode 100644 index 0000000000000000000000000000000000000000..b689a0d9441c7315385aac7bdae09d49efcbe7b7 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/atmel-i2c.txt @@ -0,0 +1,30 @@ +I2C for Atmel platforms + +Required properties : +- compatible : Must be "atmel,at91rm9200-i2c", "atmel,at91sam9261-i2c", + "atmel,at91sam9260-i2c", "atmel,at91sam9g20-i2c", "atmel,at91sam9g10-i2c" + or "atmel,at91sam9x5-i2c" +- reg: physical base address of the controller and length of memory mapped + region. +- interrupts: interrupt number to the cpu. +- #address-cells = <1>; +- #size-cells = <0>; + +Optional properties: +- Child nodes conforming to i2c bus binding + +Examples : + +i2c0: i2c@fff84000 { + compatible = "atmel,at91sam9g20-i2c"; + reg = <0xfff84000 0x100>; + interrupts = <12 4 6>; + #address-cells = <1>; + #size-cells = <0>; + + 24c512@50 { + compatible = "24c512"; + reg = <0x50>; + pagesize = <128>; + } +} diff --git a/Documentation/devicetree/bindings/i2c/davinci.txt b/Documentation/devicetree/bindings/i2c/davinci.txt new file mode 100644 index 0000000000000000000000000000000000000000..2dc935b4113d22e4bd0c80f533d3c9caefb7be44 --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/davinci.txt @@ -0,0 +1,28 @@ +* Texas Instruments Davinci I2C + +This file provides information, what the device node for the +davinci i2c interface contain. + +Required properties: +- compatible: "ti,davinci-i2c"; +- reg : Offset and length of the register set for the device + +Recommended properties : +- interrupts : standard interrupt property. +- clock-frequency : desired I2C bus clock frequency in Hz. + +Example (enbw_cmc board): + i2c@1c22000 { + compatible = "ti,davinci-i2c"; + reg = <0x22000 0x1000>; + clock-frequency = <100000>; + interrupts = <15>; + interrupt-parent = <&intc>; + #address-cells = <1>; + #size-cells = <0>; + + dtt@48 { + compatible = "national,lm75"; + reg = <0x48>; + }; + }; diff --git a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt index 30ac3a0557f7d8c99a3660cbaf6ef2d718f3f3a9..7a3fe9e5f4cbb1a95cd23f2241f649afb4e3df87 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mxs.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mxs.txt @@ -6,6 +6,7 @@ Required properties: - interrupts: Should contain ERROR and DMA interrupts - clock-frequency: Desired I2C bus clock frequency in Hz. Only 100000Hz and 400000Hz modes are supported. +- fsl,i2c-dma-channel: APBX DMA channel for the I2C Examples: @@ -16,4 +17,5 @@ i2c0: i2c@80058000 { reg = <0x80058000 2000>; interrupts = <111 68>; clock-frequency = <100000>; + fsl,i2c-dma-channel = <6>; }; diff --git a/Documentation/devicetree/bindings/i2c/nomadik.txt b/Documentation/devicetree/bindings/i2c/nomadik.txt new file mode 100644 index 0000000000000000000000000000000000000000..72065b0ff680b151a4efa4b708b1e532ed852a4c --- /dev/null +++ b/Documentation/devicetree/bindings/i2c/nomadik.txt @@ -0,0 +1,23 @@ +I2C for Nomadik based systems + +Required (non-standard) properties: + - Nil + +Recommended (non-standard) properties: + - clock-frequency : Maximum bus clock frequency for the device + +Optional (non-standard) properties: + - Nil + +Example : + +i2c@80004000 { + compatible = "stericsson,db8500-i2c", "st,nomadik-i2c"; + reg = <0x80004000 0x1000>; + interrupts = <0 21 0x4>; + #address-cells = <1>; + #size-cells = <0>; + v-i2c-supply = <&db8500_vape_reg>; + + clock-frequency = <400000>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt index 548892c08c598990c01964a86728420a7ad0967b..7da578d72123374f74e1d41575dc316c34a5fa9d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt @@ -7,7 +7,7 @@ as "armctrl" in the SoC documentation, hence naming of this binding. Required properties: -- compatible : should be "brcm,bcm2835-armctrl-ic.txt" +- compatible : should be "brcm,bcm2835-armctrl-ic" - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an diff --git a/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt new file mode 100644 index 0000000000000000000000000000000000000000..72a06c0ab1db65a9e3ac0e00fc161d070130fd3d --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/interrupts.txt @@ -0,0 +1,95 @@ +Specifying interrupt information for devices +============================================ + +1) Interrupt client nodes +------------------------- + +Nodes that describe devices which generate interrupts must contain an +"interrupts" property. This property must contain a list of interrupt +specifiers, one per output interrupt. The format of the interrupt specifier is +determined by the interrupt controller to which the interrupts are routed; see +section 2 below for details. + +The "interrupt-parent" property is used to specify the controller to which +interrupts are routed and contains a single phandle referring to the interrupt +controller node. This property is inherited, so it may be specified in an +interrupt client node or in any of its parent nodes. + +2) Interrupt controller nodes +----------------------------- + +A device is marked as an interrupt controller with the "interrupt-controller" +property. This is a empty, boolean property. An additional "#interrupt-cells" +property defines the number of cells needed to specify a single interrupt. + +It is the responsibility of the interrupt controller's binding to define the +length and format of the interrupt specifier. The following two variants are +commonly used: + + a) one cell + ----------- + The #interrupt-cells property is set to 1 and the single cell defines the + index of the interrupt within the controller. + + Example: + + vic: intc@10140000 { + compatible = "arm,versatile-vic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10140000 0x1000>; + }; + + sic: intc@10003000 { + compatible = "arm,versatile-sic"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x10003000 0x1000>; + interrupt-parent = <&vic>; + interrupts = <31>; /* Cascaded to vic */ + }; + + b) two cells + ------------ + The #interrupt-cells property is set to 2 and the first cell defines the + index of the interrupt within the controller, while the second cell is used + to specify any of the following flags: + - bits[3:0] trigger type and level flags + 1 = low-to-high edge triggered + 2 = high-to-low edge triggered + 4 = active high level-sensitive + 8 = active low level-sensitive + + Example: + + i2c@7000c000 { + gpioext: gpio-adnp@41 { + compatible = "ad,gpio-adnp"; + reg = <0x41>; + + interrupt-parent = <&gpio>; + interrupts = <160 1>; + + gpio-controller; + #gpio-cells = <1>; + + interrupt-controller; + #interrupt-cells = <2>; + + nr-gpios = <64>; + }; + + sx8634@2b { + compatible = "smtc,sx8634"; + reg = <0x2b>; + + interrupt-parent = <&gpioext>; + interrupts = <3 0x8>; + + #address-cells = <1>; + #size-cells = <0>; + + threshold = <0x40>; + sensitivity = <7>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/88pm860x.txt b/Documentation/devicetree/bindings/mfd/88pm860x.txt new file mode 100644 index 0000000000000000000000000000000000000000..63f3ee33759cf0ed57e2ff1622966b0a5a847583 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/88pm860x.txt @@ -0,0 +1,85 @@ +* Marvell 88PM860x Power Management IC + +Required parent device properties: +- compatible : "marvell,88pm860x" +- reg : the I2C slave address for the 88pm860x chip +- interrupts : IRQ line for the 88pm860x chip +- interrupt-controller: describes the 88pm860x as an interrupt controller (has its own domain) +- #interrupt-cells : should be 1. + - The cell is the 88pm860x local IRQ number + +Optional parent device properties: +- marvell,88pm860x-irq-read-clr: inicates whether interrupt status is cleared by read +- marvell,88pm860x-slave-addr: 88pm860x are two chips solution. stores the I2C address + of one chip, and this property stores the I2C address of + another chip. + +88pm860x consists of a large and varied group of sub-devices: + +Device Supply Names Description +------ ------------ ----------- +88pm860x-onkey : : On key +88pm860x-rtc : : RTC +88pm8607 : : Regulators +88pm860x-backlight : : Backlight +88pm860x-led : : Led +88pm860x-touch : : Touchscreen + +Example: + + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + interrupts = <4>; + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <1>; + + marvell,88pm860x-irq-read-clr; + marvell,88pm860x-slave-addr = <0x11>; + + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + rtc { + marvell,88pm860x-vrtc = <1>; + }; + touch { + marvell,88pm860x-gpadc-prebias = <1>; + marvell,88pm860x-gpadc-slot-cycle = <1>; + marvell,88pm860x-tsi-prebias = <6>; + marvell,88pm860x-pen-prebias = <16>; + marvell,88pm860x-pen-prechg = <2>; + marvell,88pm860x-resistor-X = <300>; + }; + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; + }; + leds { + led0-red { + marvell,88pm860x-iset = <12>; + }; + led0-green { + marvell,88pm860x-iset = <12>; + }; + led0-blue { + marvell,88pm860x-iset = <12>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/syscon.txt b/Documentation/devicetree/bindings/mfd/syscon.txt new file mode 100644 index 0000000000000000000000000000000000000000..fe8150bb3248e9920f8a24f4b91efe39440b38d6 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/syscon.txt @@ -0,0 +1,20 @@ +* System Controller Registers R/W driver + +System controller node represents a register region containing a set +of miscellaneous registers. The registers are not cohesive enough to +represent as any specific type of device. The typical use-case is for +some other node's driver, or platform-specific code, to acquire a +reference to the syscon node (e.g. by phandle, node path, or search +using a specific compatible value), interrogate the node (or associated +OS driver) to determine the location of the registers, and access the +registers directly. + +Required properties: +- compatible: Should contain "syscon". +- reg: the register region can be accessed from syscon + +Examples: +gpr: iomuxc-gpr@020e0000 { + compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e0000 0x38>; +}; diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt index db03599ae4dcf268f0410d0b1373c3369f67351d..2e3304888ffc1c10e07b83fcec088d61dce6004d 100644 --- a/Documentation/devicetree/bindings/mfd/tps65910.txt +++ b/Documentation/devicetree/bindings/mfd/tps65910.txt @@ -59,6 +59,8 @@ Optional properties: in TPS6591X datasheet) - ti,en-gpio-sleep: enable sleep control for gpios There should be 9 entries here, one for each gpio. +- ti,system-power-controller: Telling whether or not this pmic is controlling + the system power. Regulator Optional properties: - ti,regulator-ext-sleep-control: enable external sleep @@ -79,6 +81,8 @@ Example: #interrupt-cells = <2>; interrupt-controller; + ti,system-power-controller; + ti,vmbch-threshold = 0; ti,vmbch2-threshold = 0; ti,en-ck32k-xtal; diff --git a/Documentation/devicetree/bindings/mfd/twl4030-audio.txt b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt new file mode 100644 index 0000000000000000000000000000000000000000..414d2ae0adf6e1f1baf5e6e0d85162c0cef38ca8 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/twl4030-audio.txt @@ -0,0 +1,46 @@ +Texas Instruments TWL family (twl4030) audio module + +The audio module inside the TWL family consist of an audio codec and a vibra +driver. + +Required properties: +- compatible : must be "ti,twl4030-audio" + +Optional properties, nodes: + +Audio functionality: +- codec { }: Need to be present if the audio functionality is used. Within this + section the following options can be used: +- ti,digimic_delay: Delay need after enabling the digimic to reduce artifacts + from the start of the recorded sample (in ms) +-ti,ramp_delay_value: HS ramp delay configuration to reduce pop noise +-ti,hs_extmute: Use external mute for HS pop reduction +-ti,hs_extmute_gpio: Use external GPIO to control the external mute +-ti,offset_cncl_path: Offset cancellation path selection, refer to TRM for the + valid values. + +Vibra functionality +- ti,enable-vibra: Need to be set to <1> if the vibra functionality is used. if + missing or it is 0, the vibra functionality is disabled. + +Example: +&i2c1 { + clock-frequency = <2600000>; + + twl: twl@48 { + reg = <0x48>; + interrupts = <7>; /* SYS_NIRQ cascaded to intc */ + interrupt-parent = <&intc>; + + twl_audio: audio { + compatible = "ti,twl4030-audio"; + + ti,enable-vibra = <1>; + + codec { + ti,ramp_delay_value = <3>; + }; + + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mfd/twl6040.txt b/Documentation/devicetree/bindings/mfd/twl6040.txt index c855240f3a0e0afec8fa3e6870f82dddde00ebcc..0f5dd709d752490815fab1a978b8c2ff1c1f383b 100644 --- a/Documentation/devicetree/bindings/mfd/twl6040.txt +++ b/Documentation/devicetree/bindings/mfd/twl6040.txt @@ -1,7 +1,7 @@ Texas Instruments TWL6040 family -The TWL6040s are 8-channel high quality low-power audio codecs providing audio -and vibra functionality on OMAP4+ platforms. +The TWL6040s are 8-channel high quality low-power audio codecs providing audio, +vibra and GPO functionality on OMAP4+ platforms. They are connected ot the host processor via i2c for commands, McPDM for audio data and commands. @@ -10,6 +10,8 @@ Required properties: - reg: must be 0x4b for i2c address - interrupts: twl6040 has one interrupt line connecteded to the main SoC - interrupt-parent: The parent interrupt controller +- gpio-controller: +- #gpio-cells = <1>: twl6040 provides GPO lines. - twl6040,audpwron-gpio: Power on GPIO line for the twl6040 - vio-supply: Regulator for the twl6040 VIO supply @@ -37,7 +39,6 @@ Example: &i2c1 { twl6040: twl@4b { compatible = "ti,twl6040"; - reg = <0x4b>; interrupts = <0 119 4>; interrupt-parent = <&gic>; @@ -60,3 +61,5 @@ Example: }; }; }; + +/include/ "twl6040.dtsi" diff --git a/Documentation/devicetree/bindings/misc/ifm-csi.txt b/Documentation/devicetree/bindings/misc/ifm-csi.txt new file mode 100644 index 0000000000000000000000000000000000000000..5bdfffb0b9f7c00ffcbe6c313d5c17f2b72dab1e --- /dev/null +++ b/Documentation/devicetree/bindings/misc/ifm-csi.txt @@ -0,0 +1,41 @@ +IFM camera sensor interface on mpc5200 LocalPlus bus + +Required properties: +- compatible: "ifm,o2d-csi" +- reg: specifies sensor chip select number and associated address range +- interrupts: external interrupt line number and interrupt sense mode + of the interrupt line signaling frame valid events +- gpios: three gpio-specifiers for "capture", "reset" and "master enable" + GPIOs (strictly in this order). +- ifm,csi-clk-handle: the phandle to a node in the DT describing the sensor + clock generator. This node is usually a general purpose timer controller. +- ifm,csi-addr-bus-width: address bus width (valid values are 16, 24, 25) +- ifm,csi-data-bus-width: data bus width (valid values are 8 and 16) +- ifm,csi-wait-cycles: sensor bus wait cycles + +Optional properties: +- ifm,csi-byte-swap: if this property is present, the byte swapping on + the bus will be enabled. + +Example: + + csi@3,0 { + compatible = "ifm,o2d-csi"; + reg = <3 0 0x00100000>; /* CS 3, 1 MiB range */ + interrupts = <1 1 2>; /* IRQ1, edge falling */ + + ifm,csi-clk-handle = <&timer7>; + gpios = <&gpio_simple 23 0 /* image_capture */ + &gpio_simple 26 0 /* image_reset */ + &gpio_simple 29 0>; /* image_master_en */ + + ifm,csi-addr-bus-width = <24>; + ifm,csi-data-bus-width = <8>; + ifm,csi-wait-cycles = <0>; + }; + +The base address of the used chip select is specified in the +ranges property of the parent localbus node, for example: + + ranges = <0 0 0xff000000 0x01000000 + 3 0 0xe3000000 0x00100000>; diff --git a/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt new file mode 100644 index 0000000000000000000000000000000000000000..0a85c70cd30a6eed9196f20c3a7eda14db71a9ae --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/atmel-hsmci.txt @@ -0,0 +1,68 @@ +* Atmel High Speed MultiMedia Card Interface + +This controller on atmel products provides an interface for MMC, SD and SDIO +types of memory cards. + +This file documents differences between the core properties described +by mmc.txt and the properties used by the atmel-mci driver. + +1) MCI node + +Required properties: +- compatible: should be "atmel,hsmci" +- #address-cells: should be one. The cell is the slot id. +- #size-cells: should be zero. +- at least one slot node + +The node contains child nodes for each slot that the platform uses + +Example MCI node: + +mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4>; + #address-cells = <1>; + #size-cells = <0>; + + [ child node definitions...] +}; + +2) slot nodes + +Required properties: +- reg: should contain the slot id. +- bus-width: number of data lines connected to the controller + +Optional properties: +- cd-gpios: specify GPIOs for card detection +- cd-inverted: invert the value of external card detect gpio line +- wp-gpios: specify GPIOs for write protection + +Example slot node: + +slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 0> + cd-inverted; +}; + +Example full MCI node: +mmc0: mmc@f0008000 { + compatible = "atmel,hsmci"; + reg = <0xf0008000 0x600>; + interrupts = <12 4>; + #address-cells = <1>; + #size-cells = <0>; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 0> + cd-inverted; + }; + slot@1 { + reg = <1>; + bus-width = <4>; + }; +}; diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt new file mode 100644 index 0000000000000000000000000000000000000000..79276895333012e56ecaff04a4f9f877ddda985d --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -0,0 +1,87 @@ +* Samsung Exynos specific extensions to the Synopsis Designware Mobile + Storage Host Controller + +The Synopsis designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core Synopsis dw mshc controller properties described +by synposis-dw-mshc.txt and the properties used by the Samsung Exynos specific +extensions to the Synopsis Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be + - "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210 + specific extentions. + - "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412 + specific extentions. + - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 + specific extentions. + +* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface + unit (ciu) clock. This property is applicable only for Exynos5 SoC's and + ignored for Exynos4 SoC's. The valid range of divider value is 0 to 7. + +* samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value + in transmit mode and CIU clock phase shift value in receive mode for single + data rate mode operation. Refer notes below for the order of the cells and the + valid values. + +* samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value + in transmit mode and CIU clock phase shift value in receive mode for double + data rate mode operation. Refer notes below for the order of the cells and the + valid values. + + Notes for the sdr-timing and ddr-timing values: + + The order of the cells should be + - First Cell: CIU clock phase shift value for tx mode. + - Second Cell: CIU clock phase shift value for rx mode. + + Valid values for SDR and DDR CIU clock timing for Exynos5250: + - valid value for tx phase shift and rx phase shift is 0 to 7. + - when CIU clock divider value is set to 3, all possible 8 phase shift + values can be used. + - if CIU clock divider value is 0 (that is divide by 1), both tx and rx + phase shift clocks should be 0. + +Required properties for a slot: + +* gpios: specifies a list of gpios used for command, clock and data bus. The + first gpio is the command line and the second gpio is the clock line. The + rest of the gpios (depending on the bus-width property) are the data lines in + no particular order. The format of the gpio specifier depends on the gpio + controller. + +Example: + + The MSHC controller node can be split into two portions, SoC specific and + board specific portions as listed below. + + dwmmc0@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc0@12200000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + + slot@0 { + reg = <0>; + bus-width = <8>; + gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, + <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, + <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, + <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, + <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; + }; + }; diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index 8a6811f4a02f5759e2a793506f1cef40b756e2d8..8e2e0ba2f486c57ca3505e44fa85effd369c4495 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -9,12 +9,17 @@ Interpreted by the OF core: Required properties: - bus-width: Number of data lines, can be <1>, <4>, or <8> +Card detection: +If no property below is supplied, standard SDHCI card detect is used. +Only one of the properties in this section should be supplied: + - broken-cd: There is no card detection available; polling must be used. + - cd-gpios: Specify GPIOs for card detection, see gpio binding + - non-removable: non-removable slot (like eMMC); assume always present. + Optional properties: -- cd-gpios: Specify GPIOs for card detection, see gpio binding - wp-gpios: Specify GPIOs for write protection, see gpio binding - cd-inverted: when present, polarity on the cd gpio line is inverted - wp-inverted: when present, polarity on the wp gpio line is inverted -- non-removable: non-removable slot (like eMMC) - max-frequency: maximum operating clock frequency Example: diff --git a/Documentation/devicetree/bindings/mmc/pxa-mmc.txt b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt new file mode 100644 index 0000000000000000000000000000000000000000..b7025de7dced117fea02912253151400323282e6 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/pxa-mmc.txt @@ -0,0 +1,25 @@ +* PXA MMC drivers + +Driver bindings for the PXA MCI (MMC/SDIO) interfaces + +Required properties: +- compatible: Should be "marvell,pxa-mmc". +- vmmc-supply: A regulator for VMMC + +Optional properties: +- marvell,detect-delay-ms: sets the detection delay timeout in ms. +- marvell,gpio-power: GPIO spec for the card power enable pin + +This file documents differences between the core properties in mmc.txt +and the properties used by the pxa-mmc driver. + +Examples: + +mmc0: mmc@41100000 { + compatible = "marvell,pxa-mmc"; + reg = <0x41100000 0x1000>; + interrupts = <23>; + cd-gpios = <&gpio 23 0>; + wp-gpios = <&gpio 24 0>; +}; + diff --git a/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt new file mode 100644 index 0000000000000000000000000000000000000000..630a7d7f47183bb9b1bf8d3510b3119a4fa5314c --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/samsung-sdhci.txt @@ -0,0 +1,53 @@ +* Samsung's SDHCI Controller device tree bindings + +Samsung's SDHCI controller is used as a connectivity interface with external +MMC, SD and eMMC storage mediums. This file documents differences between the +core mmc properties described by mmc.txt and the properties used by the +Samsung implmentation of the SDHCI controller. + +Note: The mmc core bindings documentation states that if none of the core +card-detect bindings are used, then the standard sdhci card detect mechanism +is used. The Samsung's SDHCI controller bindings extends this as listed below. + +[A] The property "samsung,cd-pinmux-gpio" can be used as stated in the + "Optional Board Specific Properties" section below. + +[B] If core card-detect bindings and "samsung,cd-pinmux-gpio" property + is not specified, it is assumed that there is no card detection + mechanism used. + +Required SoC Specific Properties: +- compatible: should be one of the following + - "samsung,s3c6410-sdhci": For controllers compatible with s3c6410 sdhci + controller. + - "samsung,exynos4210-sdhci": For controllers compatible with Exynos4 sdhci + controller. + +Required Board Specific Properties: +- gpios: Should specify the gpios used for clock, command and data lines. The + gpio specifier format depends on the gpio controller. + +Optional Board Specific Properties: +- samsung,cd-pinmux-gpio: Specifies the card detect line that is routed + through a pinmux to the card-detect pin of the card slot. This property + should be used only if none of the mmc core card-detect properties are + used. + +Example: + sdhci@12530000 { + compatible = "samsung,exynos4210-sdhci"; + reg = <0x12530000 0x100>; + interrupts = <0 75 0>; + bus-width = <4>; + cd-gpios = <&gpk2 2 2 3 3>; + gpios = <&gpk2 0 2 0 3>, /* clock line */ + <&gpk2 1 2 0 3>, /* command line */ + <&gpk2 3 2 3 3>, /* data line 0 */ + <&gpk2 4 2 3 3>, /* data line 1 */ + <&gpk2 5 2 3 3>, /* data line 2 */ + <&gpk2 6 2 3 3>; /* data line 3 */ + }; + + Note: This example shows both SoC specific and board specific properties + in a single device node. The properties can be actually be seperated + into SoC specific node and board specific node. diff --git a/Documentation/devicetree/bindings/mmc/sdhci-dove.txt b/Documentation/devicetree/bindings/mmc/sdhci-dove.txt new file mode 100644 index 0000000000000000000000000000000000000000..ae9aab9abcd70d0977d9f7ef39fe02e384efa97a --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-dove.txt @@ -0,0 +1,14 @@ +* Marvell sdhci-dove controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-pxav2 and sdhci-pxav3 drivers. + +- compatible: Should be "marvell,dove-sdhci". + +Example: + +sdio0: sdio@92000 { + compatible = "marvell,dove-sdhci"; + reg = <0x92000 0x100>; + interrupts = <35>; +}; diff --git a/Documentation/devicetree/bindings/mmc/sdhci-spear.txt b/Documentation/devicetree/bindings/mmc/sdhci-spear.txt new file mode 100644 index 0000000000000000000000000000000000000000..fd3643e7e467d0fee8c5c4a069eacf85cc41a764 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-spear.txt @@ -0,0 +1,18 @@ +* SPEAr SDHCI Controller + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-spear driver. + +Required properties: +- compatible: "st,spear300-sdhci" + +Optional properties: +- cd-gpios: card detect gpio, with zero flags. + +Example: + + sdhci@fc000000 { + compatible = "st,spear300-sdhci"; + reg = <0xfc000000 0x1000>; + cd-gpios = <&gpio0 6 0>; + }; diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt new file mode 100644 index 0000000000000000000000000000000000000000..06cd32d0805283061ea3960321ccd45032ea1d65 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt @@ -0,0 +1,79 @@ +* Synopsis Designware Mobile Storage Host Controller + +The Synopsis designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. This file documents +differences between the core mmc properties described by mmc.txt and the +properties used by the Synopsis Designware Mobile Storage Host Controller. + +Required Properties: + +* compatible: should be + - snps,dw-mshc: for controllers compliant with synopsis dw-mshc. +* #address-cells: should be 1. +* #size-cells: should be 0. + +# Slots: The slot specific information are contained within child-nodes with + each child-node representing a supported slot. There should be atleast one + child node representing a card slot. The name of the child node representing + the slot is recommended to be slot@n where n is the unique number of the slot + connnected to the controller. The following are optional properties which + can be included in the slot child node. + + * reg: specifies the physical slot number. The valid values of this + property is 0 to (num-slots -1), where num-slots is the value + specified by the num-slots property. + + * bus-width: as documented in mmc core bindings. + + * wp-gpios: specifies the write protect gpio line. The format of the + gpio specifier depends on the gpio controller. If the write-protect + line is not available, this property is optional. + +Optional properties: + +* num-slots: specifies the number of slots supported by the controller. + The number of physical slots actually used could be equal or less than the + value specified by num-slots. If this property is not specified, the value + of num-slot property is assumed to be 1. + +* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not + specified, the default value of the fifo size is determined from the + controller registers. + +* card-detect-delay: Delay in milli-seconds before detecting card after card + insert event. The default value is 0. + +* supports-highspeed: Enables support for high speed cards (upto 50MHz) + +* broken-cd: as documented in mmc core bindings. + +Aliases: + +- All the MSHC controller nodes should be represented in the aliases node using + the following format 'mshc{n}' where n is a unique number for the alias. + +Example: + +The MSHC controller node can be split into two portions, SoC specific and +board specific portions as listed below. + + dwmmc0@12200000 { + compatible = "snps,dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc0@12200000 { + num-slots = <1>; + supports-highspeed; + broken-cd; + fifo-depth = <0x80>; + card-detect-delay = <200>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt index a20069502f5aaeeb85c45978bcf13c67f598e962..d555421ea49f8237d5a8a0c1822facd379b60f1b 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt @@ -3,7 +3,9 @@ Atmel NAND flash Required properties: - compatible : "atmel,at91rm9200-nand". - reg : should specify localbus address and size used for the chip, - and if availlable the ECC. + and hardware ECC controller if available. + If the hardware ECC is PMECC, it should contain address and size for + PMECC, PMECC Error Location controller and ROM which has lookup tables. - atmel,nand-addr-offset : offset for the address latch. - atmel,nand-cmd-offset : offset for the command latch. - #address-cells, #size-cells : Must be present if the device has sub-nodes @@ -16,6 +18,15 @@ Optional properties: - nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default. Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", "soft_bch". +- atmel,has-pmecc : boolean to enable Programmable Multibit ECC hardware. + Only supported by at91sam9x5 or later sam9 product. +- atmel,pmecc-cap : error correct capability for Programmable Multibit ECC + Controller. Supported values are: 2, 4, 8, 12, 24. +- atmel,pmecc-sector-size : sector size for ECC computation. Supported values + are: 512, 1024. +- atmel,pmecc-lookup-table-offset : includes two offsets of lookup table in ROM + for different sector size. First one is for sector size 512, the next is for + sector size 1024. - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false @@ -39,3 +50,30 @@ nand0: nand@40000000,0 { ... }; }; + +/* for PMECC supported chips */ +nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = < 0x40000000 0x10000000 /* bus addr & size */ + 0xffffe000 0x00000600 /* PMECC addr & size */ + 0xffffe600 0x00000200 /* PMECC ERRLOC addr & size */ + 0x00100000 0x00100000 /* ROM addr & size */ + >; + atmel,nand-addr-offset = <21>; /* ale */ + atmel,nand-cmd-offset = <22>; /* cle */ + nand-on-flash-bbt; + nand-ecc-mode = "hw"; + atmel,has-pmecc; /* enable PMECC */ + atmel,pmecc-cap = <2>; + atmel,pmecc-sector-size = <512>; + atmel,pmecc-lookup-table-offset = <0x8000 0x10000>; + gpios = <&pioD 5 0 /* rdy */ + &pioD 4 0 /* nce */ + 0 /* cd */ + >; + partition@0 { + ... + }; +}; diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt index 1a5bbd346d223a4d3d0429b7abd57595b025763b..3fb3f9015365d0c15d1b4219838d6d16bef9cc53 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt @@ -12,6 +12,10 @@ Required properties: - interrupt-names : The interrupt names "gpmi-dma", "bch"; - fsl,gpmi-dma-channel : Should contain the dma channel it uses. +Optional properties: + - nand-on-flash-bbt: boolean to enable on flash bbt option if not + present false + The device tree may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt new file mode 100644 index 0000000000000000000000000000000000000000..d0a37252eb22efdb41fbee3ec9508923546cc13c --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt @@ -0,0 +1,50 @@ +NXP LPC32xx SoC NAND MLC controller + +Required properties: +- compatible: "nxp,lpc3220-mlc" +- reg: Address and size of the controller +- interrupts: The NAND interrupt specification +- gpios: GPIO specification for NAND write protect + +The following required properties are very controller specific. See the LPC32xx +User Manual 7.5.14 MLC NAND Timing Register (the values here are specified in +Hz, to make them independent of actual clock speed and to provide for good +accuracy:) +- nxp,tcea_delay: TCEA_DELAY +- nxp,busy_delay: BUSY_DELAY +- nxp,nand_ta: NAND_TA +- nxp,rd_high: RD_HIGH +- nxp,rd_low: RD_LOW +- nxp,wr_high: WR_HIGH +- nxp,wr_low: WR_LOW + +Optional subnodes: +- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt + +Example: + + mlc: flash@200A8000 { + compatible = "nxp,lpc3220-mlc"; + reg = <0x200A8000 0x11000>; + interrupts = <11 0>; + #address-cells = <1>; + #size-cells = <1>; + + nxp,tcea-delay = <333333333>; + nxp,busy-delay = <10000000>; + nxp,nand-ta = <18181818>; + nxp,rd-high = <31250000>; + nxp,rd-low = <45454545>; + nxp,wr-high = <40000000>; + nxp,wr-low = <83333333>; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + + mtd0@00000000 { + label = "boot"; + reg = <0x00000000 0x00064000>; + read-only; + }; + + ... + + }; diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt new file mode 100644 index 0000000000000000000000000000000000000000..d94edc0fc554bf1085410876d604320a7468f09e --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt @@ -0,0 +1,52 @@ +NXP LPC32xx SoC NAND SLC controller + +Required properties: +- compatible: "nxp,lpc3220-slc" +- reg: Address and size of the controller +- nand-on-flash-bbt: Use bad block table on flash +- gpios: GPIO specification for NAND write protect + +The following required properties are very controller specific. See the LPC32xx +User Manual: +- nxp,wdr-clks: Delay before Ready signal is tested on write (W_RDY) +- nxp,rdr-clks: Delay before Ready signal is tested on read (R_RDY) +(The following values are specified in Hz, to make them independent of actual +clock speed:) +- nxp,wwidth: Write pulse width (W_WIDTH) +- nxp,whold: Write hold time (W_HOLD) +- nxp,wsetup: Write setup time (W_SETUP) +- nxp,rwidth: Read pulse width (R_WIDTH) +- nxp,rhold: Read hold time (R_HOLD) +- nxp,rsetup: Read setup time (R_SETUP) + +Optional subnodes: +- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt + +Example: + + slc: flash@20020000 { + compatible = "nxp,lpc3220-slc"; + reg = <0x20020000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + nxp,wdr-clks = <14>; + nxp,wwidth = <40000000>; + nxp,whold = <100000000>; + nxp,wsetup = <100000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <40000000>; + nxp,rhold = <66666666>; + nxp,rsetup = <100000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + + mtd0@00000000 { + label = "phy3250-boot"; + reg = <0x00000000 0x00064000>; + read-only; + }; + + ... + + }; diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt index a63c2bd7de2b66f4d847618d31628d22cc2c870b..94de19b8f16bcd548e2e1163704b9fc3ae2ce31f 100644 --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt @@ -16,6 +16,13 @@ file systems on embedded devices. - #address-cells, #size-cells : Must be present if the device has sub-nodes representing partitions (see below). In this case both #address-cells and #size-cells must be equal to 1. + - no-unaligned-direct-access: boolean to disable the default direct + mapping of the flash. + On some platforms (e.g. MPC5200) a direct 1:1 mapping may cause + problems with JFFS2 usage, as the local bus (LPB) doesn't support + unaligned accesses as implemented in the JFFS2 code via memcpy(). + By defining "no-unaligned-direct-access", the flash will not be + exposed directly to the MTD users (e.g. JFFS2) any more. For JEDEC compatible devices, the following additional properties are defined: diff --git a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt index 411727a3f82d6add5a7c1ca18aa01dbd30fe0ff5..c8ae996bd8f2e4403cd8c1bd7ed7507d9379f7d7 100644 --- a/Documentation/devicetree/bindings/net/calxeda-xgmac.txt +++ b/Documentation/devicetree/bindings/net/calxeda-xgmac.txt @@ -6,6 +6,9 @@ Required properties: - interrupts : Should contain 3 xgmac interrupts. The 1st is main interrupt. The 2nd is pwr mgt interrupt. The 3rd is low power state interrupt. +Optional properties: +- dma-coherent : Present if dma operations are coherent + Example: ethernet@fff50000 { diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt new file mode 100644 index 0000000000000000000000000000000000000000..daa7689560695d1769bdf7d2064ff1f0181873d6 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,falcon-pinumx.txt @@ -0,0 +1,83 @@ +Lantiq FALCON pinmux controller + +Required properties: +- compatible: "lantiq,pinctrl-falcon" +- reg: Should contain the physical address and length of the gpio/pinmux + register range + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Lantiq's pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those group(s), and two pin configuration parameters: +pull-up and open-drain + +The name of each subnode is not important as long as it is unique; all subnodes +should be enumerated and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +We support 2 types of nodes. + +Definition of mux function groups: + +Required subnode-properties: +- lantiq,groups : An array of strings. Each string contains the name of a group. + Valid values for these names are listed below. +- lantiq,function: A string containing the name of the function to mux to the + group. Valid values for function names are listed below. + +Valid values for group and function names: + + mux groups: + por, ntr, ntr8k, hrst, mdio, bootled, asc0, spi, spi cs0, spi cs1, i2c, + jtag, slic, pcm, asc1 + + functions: + rst, ntr, mdio, led, asc, spi, i2c, jtag, slic, pcm + + +Definition of pin configurations: + +Required subnode-properties: +- lantiq,pins : An array of strings. Each string contains the name of a pin. + Valid values for these names are listed below. + +Optional subnode-properties: +- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. + 0: none, 1: down +- lantiq,drive-current: Boolean, enables drive-current +- lantiq,slew-rate: Boolean, enables slew-rate + +Example: + pinmux0 { + compatible = "lantiq,pinctrl-falcon"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + state_default: pinmux { + asc0 { + lantiq,groups = "asc0"; + lantiq,function = "asc"; + }; + ntr { + lantiq,groups = "ntr8k"; + lantiq,function = "ntr"; + }; + i2c { + lantiq,groups = "i2c"; + lantiq,function = "i2c"; + }; + hrst { + lantiq,groups = "hrst"; + lantiq,function = "rst"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt new file mode 100644 index 0000000000000000000000000000000000000000..b5469db1d7adc2d4f2ff36adf6ed75e2802fe116 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/lantiq,xway-pinumx.txt @@ -0,0 +1,97 @@ +Lantiq XWAY pinmux controller + +Required properties: +- compatible: "lantiq,pinctrl-xway" or "lantiq,pinctrl-xr9" +- reg: Should contain the physical address and length of the gpio/pinmux + register range + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +Lantiq's pin configuration nodes act as a container for an abitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those group(s), and two pin configuration parameters: +pull-up and open-drain + +The name of each subnode is not important as long as it is unique; all subnodes +should be enumerated and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +We support 2 types of nodes. + +Definition of mux function groups: + +Required subnode-properties: +- lantiq,groups : An array of strings. Each string contains the name of a group. + Valid values for these names are listed below. +- lantiq,function: A string containing the name of the function to mux to the + group. Valid values for function names are listed below. + +Valid values for group and function names: + + mux groups: + exin0, exin1, exin2, jtag, ebu a23, ebu a24, ebu a25, ebu clk, ebu cs1, + ebu wait, nand ale, nand cs1, nand cle, spi, spi_cs1, spi_cs2, spi_cs3, + spi_cs4, spi_cs5, spi_cs6, asc0, asc0 cts rts, stp, nmi , gpt1, gpt2, + gpt3, clkout0, clkout1, clkout2, clkout3, gnt1, gnt2, gnt3, req1, req2, + req3 + + additional mux groups (XR9 only): + mdio, nand rdy, nand rd, exin3, exin4, gnt4, req4 + + functions: + spi, asc, cgu, jtag, exin, stp, gpt, nmi, pci, ebu, mdio + + + +Definition of pin configurations: + +Required subnode-properties: +- lantiq,pins : An array of strings. Each string contains the name of a pin. + Valid values for these names are listed below. + +Optional subnode-properties: +- lantiq,pull: Integer, representing the pull-down/up to apply to the pin. + 0: none, 1: down, 2: up. +- lantiq,open-drain: Boolean, enables open-drain on the defined pin. + +Valid values for XWAY pin names: + Pinconf pins can be referenced via the names io0-io31. + +Valid values for XR9 pin names: + Pinconf pins can be referenced via the names io0-io55. + +Example: + gpio: pinmux@E100B10 { + compatible = "lantiq,pinctrl-xway"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + pci { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + }; + conf_out { + lantiq,pins = "io4", "io5", "io6"; /* stp */ + lantiq,open-drain; + lantiq,pull = <0>; + }; + }; + }; + diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..01ef408e205f18ce5ac3c16b44e559f01f877f08 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-370-pinctrl.txt @@ -0,0 +1,95 @@ +* Marvell Armada 370 SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,88f6710-pinctrl" + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +name pins functions +================================================================================ +mpp0 0 gpio, uart0(rxd) +mpp1 1 gpo, uart0(txd) +mpp2 2 gpio, i2c0(sck), uart0(txd) +mpp3 3 gpio, i2c0(sda), uart0(rxd) +mpp4 4 gpio, cpu_pd(vdd) +mpp5 5 gpo, ge0(txclko), uart1(txd), spi1(clk), audio(mclk) +mpp6 6 gpio, ge0(txd0), sata0(prsnt), tdm(rst), audio(sdo) +mpp7 7 gpo, ge0(txd1), tdm(tdx), audio(lrclk) +mpp8 8 gpio, ge0(txd2), uart0(rts), tdm(drx), audio(bclk) +mpp9 9 gpo, ge0(txd3), uart1(txd), sd0(clk), audio(spdifo) +mpp10 10 gpio, ge0(txctl), uart0(cts), tdm(fsync), audio(sdi) +mpp11 11 gpio, ge0(rxd0), uart1(rxd), sd0(cmd), spi0(cs1), + sata1(prsnt), spi1(cs1) +mpp12 12 gpio, ge0(rxd1), i2c1(sda), sd0(d0), spi1(cs0), + audio(spdifi) +mpp13 13 gpio, ge0(rxd2), i2c1(sck), sd0(d1), tdm(pclk), + audio(rmclk) +mpp14 14 gpio, ge0(rxd3), pcie(clkreq0), sd0(d2), spi1(mosi), + spi0(cs2) +mpp15 15 gpio, ge0(rxctl), pcie(clkreq1), sd0(d3), spi1(miso), + spi0(cs3) +mpp16 16 gpio, ge0(rxclk), uart1(rxd), tdm(int), audio(extclk) +mpp17 17 gpo, ge(mdc) +mpp18 18 gpio, ge(mdio) +mpp19 19 gpio, ge0(txclk), ge1(txclkout), tdm(pclk) +mpp20 20 gpo, ge0(txd4), ge1(txd0) +mpp21 21 gpo, ge0(txd5), ge1(txd1), uart1(txd) +mpp22 22 gpo, ge0(txd6), ge1(txd2), uart0(rts) +mpp23 23 gpo, ge0(txd7), ge1(txd3), spi1(mosi) +mpp24 24 gpio, ge0(col), ge1(txctl), spi1(cs0) +mpp25 25 gpio, ge0(rxerr), ge1(rxd0), uart1(rxd) +mpp26 26 gpio, ge0(crs), ge1(rxd1), spi1(miso) +mpp27 27 gpio, ge0(rxd4), ge1(rxd2), uart0(cts) +mpp28 28 gpio, ge0(rxd5), ge1(rxd3) +mpp29 29 gpio, ge0(rxd6), ge1(rxctl), i2c1(sda) +mpp30 30 gpio, ge0(rxd7), ge1(rxclk), i2c1(sck) +mpp31 31 gpio, tclk, ge0(txerr) +mpp32 32 gpio, spi0(cs0) +mpp33 33 gpio, dev(bootcs), spi0(cs0) +mpp34 34 gpo, dev(wen0), spi0(mosi) +mpp35 35 gpo, dev(oen), spi0(sck) +mpp36 36 gpo, dev(a1), spi0(miso) +mpp37 37 gpo, dev(a0), sata0(prsnt) +mpp38 38 gpio, dev(ready), uart1(cts), uart0(cts) +mpp39 39 gpo, dev(ad0), audio(spdifo) +mpp40 40 gpio, dev(ad1), uart1(rts), uart0(rts) +mpp41 41 gpio, dev(ad2), uart1(rxd) +mpp42 42 gpo, dev(ad3), uart1(txd) +mpp43 43 gpo, dev(ad4), audio(bclk) +mpp44 44 gpo, dev(ad5), audio(mclk) +mpp45 45 gpo, dev(ad6), audio(lrclk) +mpp46 46 gpo, dev(ad7), audio(sdo) +mpp47 47 gpo, dev(ad8), sd0(clk), audio(spdifo) +mpp48 48 gpio, dev(ad9), uart0(rts), sd0(cmd), sata1(prsnt), + spi0(cs1) +mpp49 49 gpio, dev(ad10), pcie(clkreq1), sd0(d0), spi1(cs0), + audio(spdifi) +mpp50 50 gpio, dev(ad11), uart0(cts), sd0(d1), spi1(miso), + audio(rmclk) +mpp51 51 gpio, dev(ad12), i2c1(sda), sd0(d2), spi1(mosi) +mpp52 52 gpio, dev(ad13), i2c1(sck), sd0(d3), spi1(sck) +mpp53 53 gpio, dev(ad14), sd0(clk), tdm(pclk), spi0(cs2), + pcie(clkreq1) +mpp54 54 gpo, dev(ad15), tdm(dtx) +mpp55 55 gpio, dev(cs1), uart1(txd), tdm(rst), sata1(prsnt), + sata0(prsnt) +mpp56 56 gpio, dev(cs2), uart1(cts), uart0(cts), spi0(cs3), + pcie(clkreq0), spi1(cs1) +mpp57 57 gpio, dev(cs3), uart1(rxd), tdm(fsync), sata0(prsnt), + audio(sdo) +mpp58 58 gpio, dev(cs0), uart1(rts), tdm(int), audio(extclk), + uart0(rts) +mpp59 59 gpo, dev(ale0), uart1(rts), uart0(rts), audio(bclk) +mpp60 60 gpio, dev(ale1), uart1(rxd), sata0(prsnt), pcie(rst-out), + audio(sdi) +mpp61 61 gpo, dev(wen1), uart1(txd), audio(rclk) +mpp62 62 gpio, dev(a2), uart1(cts), tdm(drx), pcie(clkreq0), + audio(mclk), uart0(cts) +mpp63 63 gpo, spi0(sck), tclk +mpp64 64 gpio, spi0(miso), spi0-1(cs1) +mpp65 65 gpio, spi0(mosi), spi0-1(cs2) diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..bfa0a2e5e0cb929d91f666537fe45a99199005d0 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-xp-pinctrl.txt @@ -0,0 +1,100 @@ +* Marvell Armada XP SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,mv78230-pinctrl", "marvell,mv78260-pinctrl", + "marvell,mv78460-pinctrl" + +This driver supports all Armada XP variants, i.e. mv78230, mv78260, and mv78460. + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +* Marvell Armada XP (all variants) + +name pins functions +================================================================================ +mpp0 0 gpio, ge0(txclko), lcd(d0) +mpp1 1 gpio, ge0(txd0), lcd(d1) +mpp2 2 gpio, ge0(txd1), lcd(d2) +mpp3 3 gpio, ge0(txd2), lcd(d3) +mpp4 4 gpio, ge0(txd3), lcd(d4) +mpp5 5 gpio, ge0(txctl), lcd(d5) +mpp6 6 gpio, ge0(rxd0), lcd(d6) +mpp7 7 gpio, ge0(rxd1), lcd(d7) +mpp8 8 gpio, ge0(rxd2), lcd(d8) +mpp9 9 gpio, ge0(rxd3), lcd(d9) +mpp10 10 gpio, ge0(rxctl), lcd(d10) +mpp11 11 gpio, ge0(rxclk), lcd(d11) +mpp12 12 gpio, ge0(txd4), ge1(txd0), lcd(d12) +mpp13 13 gpio, ge0(txd5), ge1(txd1), lcd(d13) +mpp14 14 gpio, ge0(txd6), ge1(txd2), lcd(d15) +mpp15 15 gpio, ge0(txd7), ge1(txd3), lcd(d16) +mpp16 16 gpio, ge0(txd7), ge1(txd3), lcd(d16) +mpp17 17 gpio, ge0(col), ge1(txctl), lcd(d17) +mpp18 18 gpio, ge0(rxerr), ge1(rxd0), lcd(d18), ptp(trig) +mpp19 19 gpio, ge0(crs), ge1(rxd1), lcd(d19), ptp(evreq) +mpp20 20 gpio, ge0(rxd4), ge1(rxd2), lcd(d20), ptp(clk) +mpp21 21 gpio, ge0(rxd5), ge1(rxd3), lcd(d21), mem(bat) +mpp22 22 gpio, ge0(rxd6), ge1(rxctl), lcd(d22), sata0(prsnt) +mpp23 23 gpio, ge0(rxd7), ge1(rxclk), lcd(d23), sata1(prsnt) +mpp24 24 gpio, lcd(hsync), sata1(prsnt), nf(bootcs-re), tdm(rst) +mpp25 25 gpio, lcd(vsync), sata0(prsnt), nf(bootcs-we), tdm(pclk) +mpp26 26 gpio, lcd(clk), tdm(fsync), vdd(cpu1-pd) +mpp27 27 gpio, lcd(e), tdm(dtx), ptp(trig) +mpp28 28 gpio, lcd(pwm), tdm(drx), ptp(evreq) +mpp29 29 gpio, lcd(ref-clk), tdm(int0), ptp(clk), vdd(cpu0-pd) +mpp30 30 gpio, tdm(int1), sd0(clk) +mpp31 31 gpio, tdm(int2), sd0(cmd), vdd(cpu0-pd) +mpp32 32 gpio, tdm(int3), sd0(d0), vdd(cpu1-pd) +mpp33 33 gpio, tdm(int4), sd0(d1), mem(bat) +mpp34 34 gpio, tdm(int5), sd0(d2), sata0(prsnt) +mpp35 35 gpio, tdm(int6), sd0(d3), sata1(prsnt) +mpp36 36 gpio, spi(mosi) +mpp37 37 gpio, spi(miso) +mpp38 38 gpio, spi(sck) +mpp39 39 gpio, spi(cs0) +mpp40 40 gpio, spi(cs1), uart2(cts), lcd(vga-hsync), vdd(cpu1-pd), + pcie(clkreq0) +mpp41 41 gpio, spi(cs2), uart2(rts), lcd(vga-vsync), sata1(prsnt), + pcie(clkreq1) +mpp42 42 gpio, uart2(rxd), uart0(cts), tdm(int7), tdm-1(timer), + vdd(cpu0-pd) +mpp43 43 gpio, uart2(txd), uart0(rts), spi(cs3), pcie(rstout), + vdd(cpu2-3-pd){1} +mpp44 44 gpio, uart2(cts), uart3(rxd), spi(cs4), pcie(clkreq2), + mem(bat) +mpp45 45 gpio, uart2(rts), uart3(txd), spi(cs5), sata1(prsnt) +mpp46 46 gpio, uart3(rts), uart1(rts), spi(cs6), sata0(prsnt) +mpp47 47 gpio, uart3(cts), uart1(cts), spi(cs7), pcie(clkreq3), + ref(clkout) +mpp48 48 gpio, tclk, dev(burst/last) + +* Marvell Armada XP (mv78260 and mv78460 only) + +name pins functions +================================================================================ +mpp49 49 gpio, dev(we3) +mpp50 50 gpio, dev(we2) +mpp51 51 gpio, dev(ad16) +mpp52 52 gpio, dev(ad17) +mpp53 53 gpio, dev(ad18) +mpp54 54 gpio, dev(ad19) +mpp55 55 gpio, dev(ad20), vdd(cpu0-pd) +mpp56 56 gpio, dev(ad21), vdd(cpu1-pd) +mpp57 57 gpio, dev(ad22), vdd(cpu2-3-pd){1} +mpp58 58 gpio, dev(ad23) +mpp59 59 gpio, dev(ad24) +mpp60 60 gpio, dev(ad25) +mpp61 61 gpio, dev(ad26) +mpp62 62 gpio, dev(ad27) +mpp63 63 gpio, dev(ad28) +mpp64 64 gpio, dev(ad29) +mpp65 65 gpio, dev(ad30) +mpp66 66 gpio, dev(ad31) + +Notes: +* {1} vdd(cpu2-3-pd) only available on mv78460. diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..a648aaad61102e7b58feb6a0a98085b1493befa5 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,dove-pinctrl.txt @@ -0,0 +1,72 @@ +* Marvell Dove SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,dove-pinctrl" +- clocks: (optional) phandle of pdma clock + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +name pins functions +================================================================================ +mpp0 0 gpio, pmu, uart2(rts), sdio0(cd), lcd0(pwm) +mpp1 1 gpio, pmu, uart2(cts), sdio0(wp), lcd1(pwm) +mpp2 2 gpio, pmu, uart2(txd), sdio0(buspwr), sata(prsnt), + uart1(rts) +mpp3 3 gpio, pmu, uart2(rxd), sdio0(ledctrl), sata(act), + uart1(cts), lcd-spi(cs1) +mpp4 4 gpio, pmu, uart3(rts), sdio1(cd), spi1(miso) +mpp5 5 gpio, pmu, uart3(cts), sdio1(wp), spi1(cs) +mpp6 6 gpio, pmu, uart3(txd), sdio1(buspwr), spi1(mosi) +mpp7 7 gpio, pmu, uart3(rxd), sdio1(ledctrl), spi1(sck) +mpp8 8 gpio, pmu, watchdog(rstout) +mpp9 9 gpio, pmu, pex1(clkreq) +mpp10 10 gpio, pmu, ssp(sclk) +mpp11 11 gpio, pmu, sata(prsnt), sata-1(act), sdio0(ledctrl), + sdio1(ledctrl), pex0(clkreq) +mpp12 12 gpio, pmu, uart2(rts), audio0(extclk), sdio1(cd), sata(act) +mpp13 13 gpio, pmu, uart2(cts), audio1(extclk), sdio1(wp), + ssp(extclk) +mpp14 14 gpio, pmu, uart2(txd), sdio1(buspwr), ssp(rxd) +mpp15 15 gpio, pmu, uart2(rxd), sdio1(ledctrl), ssp(sfrm) +mpp16 16 gpio, uart3(rts), sdio0(cd), ac97(sdi1), lcd-spi(cs1) +mpp17 17 gpio, uart3(cts), sdio0(wp), ac97(sdi2), twsi(sda), + ac97-1(sysclko) +mpp18 18 gpio, uart3(txd), sdio0(buspwr), ac97(sdi3), lcd0(pwm) +mpp19 19 gpio, uart3(rxd), sdio0(ledctrl), twsi(sck) +mpp20 20 gpio, sdio0(cd), sdio1(cd), spi1(miso), lcd-spi(miso), + ac97(sysclko) +mpp21 21 gpio, sdio0(wp), sdio1(wp), spi1(cs), lcd-spi(cs0), + uart1(cts), ssp(sfrm) +mpp22 22 gpio, sdio0(buspwr), sdio1(buspwr), spi1(mosi), + lcd-spi(mosi), uart1(cts), ssp(txd) +mpp23 23 gpio, sdio0(ledctrl), sdio1(ledctrl), spi1(sck), + lcd-spi(sck), ssp(sclk) +mpp_camera 24-39 gpio, camera +mpp_sdio0 40-45 gpio, sdio0 +mpp_sdio1 46-51 gpio, sdio1 +mpp_audio1 52-57 gpio, i2s1/spdifo, i2s1, spdifo, twsi, ssp/spdifo, ssp, + ssp/twsi +mpp_spi0 58-61 gpio, spi0 +mpp_uart1 62-63 gpio, uart1 +mpp_nand 64-71 gpo, nand +audio0 - i2s, ac97 +twsi - none, opt1, opt2, opt3 + +Notes: +* group "mpp_audio1" allows the following functions and gpio pins: + - gpio : gpio on pins 52-57 + - i2s1/spdifo : audio1 i2s on pins 52-55 and spdifo on 57, no gpios + - i2s1 : audio1 i2s on pins 52-55, gpio on pins 56,57 + - spdifo : spdifo on pin 57, gpio on pins 52-55 + - twsi : twsi on pins 56,57, gpio on pins 52-55 + - ssp/spdifo : ssp on pins 52-55, spdifo on pin 57, no gpios + - ssp : ssp on pins 52-55, gpio on pins 56,57 + - ssp/twsi : ssp on pins 52-55, twsi on pins 56,57, no gpios +* group "audio0" internally muxes i2s0 or ac97 controller to the dedicated + audio0 pins. +* group "twsi" internally muxes twsi controller to the dedicated or option pins. diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..361bccb7ec89bad6f23eca65a44a98466fa712ea --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,kirkwood-pinctrl.txt @@ -0,0 +1,279 @@ +* Marvell Kirkwood SoC pinctrl driver for mpp + +Please refer to marvell,mvebu-pinctrl.txt in this directory for common binding +part and usage. + +Required properties: +- compatible: "marvell,88f6180-pinctrl", + "marvell,88f6190-pinctrl", "marvell,88f6192-pinctrl", + "marvell,88f6281-pinctrl", "marvell,88f6282-pinctrl" + +This driver supports all kirkwood variants, i.e. 88f6180, 88f619x, and 88f628x. + +Available mpp pins/groups and functions: +Note: brackets (x) are not part of the mpp name for marvell,function and given +only for more detailed description in this document. + +* Marvell Kirkwood 88f6180 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig) +mpp12 12 gpo, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs) +mpp17 17 gpio, sdio(d3) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, mii(rxerr) +mpp21 21 gpio, audio(spdifi) +mpp22 22 gpio, audio(spdifo) +mpp23 23 gpio, audio(rmclk) +mpp24 24 gpio, audio(bclk) +mpp25 25 gpio, audio(sdo) +mpp26 26 gpio, audio(lrclk) +mpp27 27 gpio, audio(mclk) +mpp28 28 gpio, audio(sdi) +mpp29 29 gpio, audio(extclk) + +* Marvell Kirkwood 88f6190 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col), mii-1(rxerr) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs), sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig), sata0(act) +mpp12 12 gpo, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs) +mpp17 17 gpio, sdio(d3), sata0(prsnt) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0) +mpp21 21 gpio, ge1(txd1), sata0(act) +mpp22 22 gpio, ge1(txd2) +mpp23 23 gpio, ge1(txd3), sata0(prsnt) +mpp24 24 gpio, ge1(rxd0) +mpp25 25 gpio, ge1(rxd1) +mpp26 26 gpio, ge1(rxd2) +mpp27 27 gpio, ge1(rxd3) +mpp28 28 gpio, ge1(col) +mpp29 29 gpio, ge1(txclk) +mpp30 30 gpio, ge1(rxclk) +mpp31 31 gpio, ge1(rxclk) +mpp32 32 gpio, ge1(txclko) +mpp33 33 gpo, ge1(txclk) +mpp34 34 gpio, ge1(txen) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr) + +* Marvell Kirkwood 88f6192 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col), mii-1(rxerr), sata1(prsnt) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs), sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig), sata1(act) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig), sata0(act) +mpp12 12 gpo, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs), + sata1(act) +mpp17 17 gpio, sdio(d3), sata0(prsnt) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi), + sata1(act) +mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql), + audio(spdifo) +mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk), + sata1(prsnt) +mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql), + audio(bclk) +mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo) +mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk) +mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk) +mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi) +mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk) +mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst) +mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk) +mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs) +mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx) +mpp33 33 gpo, ge1(txclk), tdm(drx) +mpp34 34 gpio, ge1(txen), tdm(spi-cs1) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql) + +* Marvell Kirkwood 88f6281 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), ptp(clk), sata1(act) +mpp5 5 gpo, nand(io7), uart0(txd), ptp(trig), sata0(act) +mpp6 6 sysrst(out), spi(mosi), ptp(trig) +mpp7 7 gpo, pex(rsto), spi(cs), ptp(trig) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), ptp(clk), + mii(col), mii-1(rxerr), sata1(prsnt) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), ptp(evreq), + mii(crs), sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), ptp(trig), sata1(act) +mpp11 11 gpio, spi(miso), uart0(rxd), ptp(clk), ptp-1(evreq), + ptp-2(trig), sata0(act) +mpp12 12 gpio, sdio(clk) +mpp13 13 gpio, sdio(cmd), uart1(txd) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs), + sata1(act) +mpp17 17 gpio, sdio(d3), sata0(prsnt) +mpp18 18 gpo, nand(io0) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi), + sata1(act) +mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql), + audio(spdifo) +mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk), + sata1(prsnt) +mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql), + audio(bclk) +mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo) +mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk) +mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk) +mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi) +mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk) +mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst) +mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk) +mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs) +mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx) +mpp33 33 gpo, ge1(txclk), tdm(drx) +mpp34 34 gpio, ge1(txen), tdm(spi-cs1), sata1(act) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql) +mpp36 36 gpio, ts(mp0), tdm(spi-cs1), audio(spdifi) +mpp37 37 gpio, ts(mp1), tdm(tx2ql), audio(spdifo) +mpp38 38 gpio, ts(mp2), tdm(rx2ql), audio(rmclk) +mpp39 39 gpio, ts(mp3), tdm(spi-cs0), audio(bclk) +mpp40 40 gpio, ts(mp4), tdm(spi-sck), audio(sdo) +mpp41 41 gpio, ts(mp5), tdm(spi-miso), audio(lrclk) +mpp42 42 gpio, ts(mp6), tdm(spi-mosi), audio(mclk) +mpp43 43 gpio, ts(mp7), tdm(int), audio(sdi) +mpp44 44 gpio, ts(mp8), tdm(rst), audio(extclk) +mpp45 45 gpio, ts(mp9), tdm(pclk) +mpp46 46 gpio, ts(mp10), tdm(fs) +mpp47 47 gpio, ts(mp11), tdm(drx) +mpp48 48 gpio, ts(mp12), tdm(dtx) +mpp49 49 gpio, ts(mp9), tdm(rx0ql), ptp(clk) + +* Marvell Kirkwood 88f6282 + +name pins functions +================================================================================ +mpp0 0 gpio, nand(io2), spi(cs) +mpp1 1 gpo, nand(io3), spi(mosi) +mpp2 2 gpo, nand(io4), spi(sck) +mpp3 3 gpo, nand(io5), spi(miso) +mpp4 4 gpio, nand(io6), uart0(rxd), sata1(act), lcd(hsync) +mpp5 5 gpo, nand(io7), uart0(txd), sata0(act), lcd(vsync) +mpp6 6 sysrst(out), spi(mosi) +mpp7 7 gpo, spi(cs), lcd(pwm) +mpp8 8 gpio, twsi0(sda), uart0(rts), uart1(rts), mii(col), + mii-1(rxerr), sata1(prsnt) +mpp9 9 gpio, twsi(sck), uart0(cts), uart1(cts), mii(crs), + sata0(prsnt) +mpp10 10 gpo, spi(sck), uart0(txd), sata1(act) +mpp11 11 gpio, spi(miso), uart0(rxd), sata0(act) +mpp12 12 gpo, sdio(clk), audio(spdifo), spi(mosi), twsi(sda) +mpp13 13 gpio, sdio(cmd), uart1(txd), audio(rmclk), lcd(pwm) +mpp14 14 gpio, sdio(d0), uart1(rxd), mii(col), sata1(prsnt), + audio(spdifi), audio-1(sdi) +mpp15 15 gpio, sdio(d1), uart0(rts), uart1(txd), sata0(act), + spi(cs) +mpp16 16 gpio, sdio(d2), uart0(cts), uart1(rxd), mii(crs), + sata1(act), lcd(extclk) +mpp17 17 gpio, sdio(d3), sata0(prsnt), sata1(act), twsi1(sck) +mpp18 18 gpo, nand(io0), pex(clkreq) +mpp19 19 gpo, nand(io1) +mpp20 20 gpio, ge1(txd0), ts(mp0), tdm(tx0ql), audio(spdifi), + sata1(act), lcd(d0) +mpp21 21 gpio, ge1(txd1), sata0(act), ts(mp1), tdm(rx0ql), + audio(spdifo), lcd(d1) +mpp22 22 gpio, ge1(txd2), ts(mp2), tdm(tx2ql), audio(rmclk), + sata1(prsnt), lcd(d2) +mpp23 23 gpio, ge1(txd3), sata0(prsnt), ts(mp3), tdm(rx2ql), + audio(bclk), lcd(d3) +mpp24 24 gpio, ge1(rxd0), ts(mp4), tdm(spi-cs0), audio(sdo), + lcd(d4) +mpp25 25 gpio, ge1(rxd1), ts(mp5), tdm(spi-sck), audio(lrclk), + lcd(d5) +mpp26 26 gpio, ge1(rxd2), ts(mp6), tdm(spi-miso), audio(mclk), + lcd(d6) +mpp27 27 gpio, ge1(rxd3), ts(mp7), tdm(spi-mosi), audio(sdi), + lcd(d7) +mpp28 28 gpio, ge1(col), ts(mp8), tdm(int), audio(extclk), + lcd(d8) +mpp29 29 gpio, ge1(txclk), ts(mp9), tdm(rst), lcd(d9) +mpp30 30 gpio, ge1(rxclk), ts(mp10), tdm(pclk), lcd(d10) +mpp31 31 gpio, ge1(rxclk), ts(mp11), tdm(fs), lcd(d11) +mpp32 32 gpio, ge1(txclko), ts(mp12), tdm(drx), lcd(d12) +mpp33 33 gpo, ge1(txclk), tdm(drx), lcd(d13) +mpp34 34 gpio, ge1(txen), tdm(spi-cs1), sata1(act), lcd(d14) +mpp35 35 gpio, ge1(rxerr), sata0(act), mii(rxerr), tdm(tx0ql), + lcd(d15) +mpp36 36 gpio, ts(mp0), tdm(spi-cs1), audio(spdifi), twsi1(sda) +mpp37 37 gpio, ts(mp1), tdm(tx2ql), audio(spdifo), twsi1(sck) +mpp38 38 gpio, ts(mp2), tdm(rx2ql), audio(rmclk), lcd(d18) +mpp39 39 gpio, ts(mp3), tdm(spi-cs0), audio(bclk), lcd(d19) +mpp40 40 gpio, ts(mp4), tdm(spi-sck), audio(sdo), lcd(d20) +mpp41 41 gpio, ts(mp5), tdm(spi-miso), audio(lrclk), lcd(d21) +mpp42 42 gpio, ts(mp6), tdm(spi-mosi), audio(mclk), lcd(d22) +mpp43 43 gpio, ts(mp7), tdm(int), audio(sdi), lcd(d23) +mpp44 44 gpio, ts(mp8), tdm(rst), audio(extclk), lcd(clk) +mpp45 45 gpio, ts(mp9), tdm(pclk), lcd(e) +mpp46 46 gpio, ts(mp10), tdm(fs), lcd(hsync) +mpp47 47 gpio, ts(mp11), tdm(drx), lcd(vsync) +mpp48 48 gpio, ts(mp12), tdm(dtx), lcd(d16) +mpp49 49 gpo, tdm(rx0ql), pex(clkreq), lcd(d17) diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt new file mode 100644 index 0000000000000000000000000000000000000000..0a26c3aa4e6d0ccc20ad78c981f52fb4733e14aa --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,mvebu-pinctrl.txt @@ -0,0 +1,46 @@ +* Marvell SoC pinctrl core driver for mpp + +The pinctrl driver enables Marvell SoCs to configure the multi-purpose pins +(mpp) to a specific function. For each SoC family there is a SoC specific +driver using this core driver. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +A Marvell SoC pin configuration node is a node of a group of pins which can +be used for a specific device or function. Each node requires one or more +mpp pins or group of pins and a mpp function common to all pins. + +Required properties for pinctrl driver: +- compatible: "marvell,-pinctrl" + Please refer to each marvell,-pinctrl.txt binding doc for supported SoCs. + +Required properties for pin configuration node: +- marvell,pins: string array of mpp pins or group of pins to be muxed. +- marvell,function: string representing a function to mux to for all + marvell,pins given in this pin configuration node. The function has to be + common for all marvell,pins. Please refer to marvell,-pinctrl.txt for + valid pin/pin group names and available function names for each SoC. + +Examples: + +uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <7>; + + pinctrl-0 = <&pmx_uart1_sw>; + pinctrl-names = "default"; +}; + +pinctrl: pinctrl@d0200 { + compatible = "marvell,dove-pinctrl"; + reg = <0xd0200 0x20>; + + pmx_uart1_sw: pmx-uart1-sw { + marvell,pins = "mpp_uart1"; + marvell,function = "uart1"; + }; +}; diff --git a/Documentation/devicetree/bindings/power/opp.txt b/Documentation/devicetree/bindings/power/opp.txt new file mode 100644 index 0000000000000000000000000000000000000000..74499e5033fc16dc12afd80c090481b31a25d687 --- /dev/null +++ b/Documentation/devicetree/bindings/power/opp.txt @@ -0,0 +1,25 @@ +* Generic OPP Interface + +SoCs have a standard set of tuples consisting of frequency and +voltage pairs that the device will support per voltage domain. These +are called Operating Performance Points or OPPs. + +Properties: +- operating-points: An array of 2-tuples items, and each item consists + of frequency and voltage like . + freq: clock frequency in kHz + vol: voltage in microvolt + +Examples: + +cpu@0 { + compatible = "arm,cortex-a9"; + reg = <0>; + next-level-cache = <&L2>; + operating-points = < + /* kHz uV */ + 792000 1100000 + 396000 950000 + 198000 850000 + >; +}; diff --git a/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt b/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt index 939a26d541f64251252a652c04270e82c96b377b..d5e370450ac0b265540f092a6e3dd9c6315c6c74 100644 --- a/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt +++ b/Documentation/devicetree/bindings/powerpc/fsl/ifc.txt @@ -12,9 +12,12 @@ Properties: - #size-cells : Either one or two, depending on how large each chipselect can be. - reg : Offset and length of the register set for the device -- interrupts : IFC has two interrupts. The first one is the "common" - interrupt(CM_EVTER_STAT), and second is the NAND interrupt - (NAND_EVTER_STAT). +- interrupts: IFC may have one or two interrupts. If two interrupt + specifiers are present, the first is the "common" + interrupt (CM_EVTER_STAT), and the second is the NAND + interrupt (NAND_EVTER_STAT). If there is only one, + that interrupt reports both types of event. + - ranges : Each range corresponds to a single chipselect, and covers the entire access window as configured. diff --git a/Documentation/devicetree/bindings/pwm/imx-pwm.txt b/Documentation/devicetree/bindings/pwm/imx-pwm.txt new file mode 100644 index 0000000000000000000000000000000000000000..8522bfbccfd79f3bdd40306d2cf9650ce08edc6b --- /dev/null +++ b/Documentation/devicetree/bindings/pwm/imx-pwm.txt @@ -0,0 +1,17 @@ +Freescale i.MX PWM controller + +Required properties: +- compatible: should be "fsl,-pwm" +- reg: physical base address and length of the controller's registers +- #pwm-cells: should be 2. The first cell specifies the per-chip index + of the PWM to use and the second cell is the period in nanoseconds. +- interrupts: The interrupt for the pwm controller + +Example: + +pwm1: pwm@53fb4000 { + #pwm-cells = <2>; + compatible = "fsl,imx53-pwm", "fsl,imx27-pwm"; + reg = <0x53fb4000 0x4000>; + interrupts = <61>; +}; diff --git a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt index b16f4a57d1116756b750a9f5523e1b1c19352ba2..9e3f8f1d46a26642577177806d5f94f2db2b91a1 100644 --- a/Documentation/devicetree/bindings/pwm/mxs-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/mxs-pwm.txt @@ -4,14 +4,14 @@ Required properties: - compatible: should be "fsl,imx23-pwm" - reg: physical base address and length of the controller's registers - #pwm-cells: should be 2. The first cell specifies the per-chip index - of the PWM to use and the second cell is the duty cycle in nanoseconds. + of the PWM to use and the second cell is the period in nanoseconds. - fsl,pwm-number: the number of PWM devices Example: pwm: pwm@80064000 { compatible = "fsl,imx28-pwm", "fsl,imx23-pwm"; - reg = <0x80064000 2000>; + reg = <0x80064000 0x2000>; #pwm-cells = <2>; fsl,pwm-number = <8>; }; diff --git a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt index bbbeedb4ec055c9c7f69b77ec1348a1525bc9dd5..01438ecd6628b80920dba8c783483dc94320373b 100644 --- a/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt +++ b/Documentation/devicetree/bindings/pwm/nvidia,tegra20-pwm.txt @@ -7,7 +7,7 @@ Required properties: - reg: physical base address and length of the controller's registers - #pwm-cells: On Tegra the number of cells used to specify a PWM is 2. The first cell specifies the per-chip index of the PWM to use and the second - cell is the duty cycle in nanoseconds. + cell is the period in nanoseconds. Example: diff --git a/Documentation/devicetree/bindings/regulator/88pm860x.txt b/Documentation/devicetree/bindings/regulator/88pm860x.txt new file mode 100644 index 0000000000000000000000000000000000000000..1267b3e1a2cca17436442f277b850ab4635fa1eb --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/88pm860x.txt @@ -0,0 +1,30 @@ +Marvell 88PM860x regulator + +Required properties: +- compatible: "marvell,88pm860x" +- reg: I2C slave address +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the regulator-compatible + property, with valid values listed below. + +Example: + + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/max8907.txt b/Documentation/devicetree/bindings/regulator/max8907.txt new file mode 100644 index 0000000000000000000000000000000000000000..371eccd1cd6897b0395e53ad6a717b964722ba34 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/max8907.txt @@ -0,0 +1,69 @@ +MAX8907 regulator + +Required properties: +- compatible: "maxim,max8907" +- reg: I2C slave address +- interrupts: The interrupt output of the controller +- mbatt-supply: The input supply for MBATT, BBAT, SDBY, VRTC. +- in-v1-supply: The input supply for SD1. +- in-v2-supply: The input supply for SD2. +- in-v3-supply: The input supply for SD3. +- in1-supply: The input supply for LDO1. +... +- in20-supply: The input supply for LDO20. +- regulators: A node that houses a sub-node for each regulator within the + device. Each sub-node is identified using the node's name (or the deprecated + regulator-compatible property if present), with valid values listed below. + The content of each sub-node is defined by the standard binding for + regulators; see regulator.txt. + +Optional properties: +- maxim,system-power-controller: Boolean property indicating that the PMIC + controls the overall system power. + +The valid names for regulators are: + + sd1, sd2, sd3, ldo1, ldo2, ldo3, ldo4, ldo5, ldo6, ldo7, ldo8, ldo9, ldo10, + ldo11, ldo12, ldo13, ldo14, ldo15, ldo16, ldo17, ldo18, ldo19, ldo20, out5v, + out33v, bbat, sdby, vrtc. + +Example: + + max8907@3c { + compatible = "maxim,max8907"; + reg = <0x3c>; + interrupts = <0 86 0x4>; + + maxim,system-power-controller; + + mbatt-supply = <&some_reg>; + in-v1-supply = <&mbatt_reg>; + ... + in1-supply = <&mbatt_reg>; + ... + + regulators { + mbatt_reg: mbatt { + regulator-name = "vbat_pmu"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + sd1 { + regulator-name = "nvvdd_sv1,vdd_cpu_pmu"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + }; + + sd2 { + regulator-name = "nvvdd_sv2,vdd_core"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; +... + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/tps6586x.txt b/Documentation/devicetree/bindings/regulator/tps6586x.txt index 07b9ef6e49d5a82fb3b8026947eae0d4411e5d98..8b40cac24d93959740b828f8614736177028f066 100644 --- a/Documentation/devicetree/bindings/regulator/tps6586x.txt +++ b/Documentation/devicetree/bindings/regulator/tps6586x.txt @@ -22,6 +22,10 @@ Required properties: - vinldo678-supply: The input supply for the LDO6, LDO7 and LDO8 - vinldo9-supply: The input supply for the LDO9 +Optional properties: +- ti,system-power-controller: Telling whether or not this pmic is controlling + the system power. + Each regulator is defined using the standard binding for regulators. Note: LDO5 and LDO_RTC is supplied by SYS regulator internally and driver @@ -37,6 +41,8 @@ Example: #gpio-cells = <2>; gpio-controller; + ti,system-power-controller; + sys-supply = <&some_reg>; vin-sm0-supply = <&some_reg>; vin-sm1-supply = <&some_reg>; diff --git a/Documentation/devicetree/bindings/rtc/snvs-rtc.txt b/Documentation/devicetree/bindings/rtc/snvs-rtc.txt new file mode 100644 index 0000000000000000000000000000000000000000..fb61ed77ada36b9469416affe7de6baf53f6b67f --- /dev/null +++ b/Documentation/devicetree/bindings/rtc/snvs-rtc.txt @@ -0,0 +1 @@ +See Documentation/devicetree/bindings/crypto/fsl-sec4.txt for details. diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt new file mode 100644 index 0000000000000000000000000000000000000000..c58573b5b1a466f43e3a71a788a65f545c5728ae --- /dev/null +++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt @@ -0,0 +1,35 @@ +* Freescale i.MX UART controller + +Required properties: +- compatible : should be "fsl,imx21-uart" +- reg : Address and length of the register set for the device +- interrupts : Should contain UART interrupt number + +Optional properties: +- fsl,uart-has-rtscts: indicate that RTS/CTS signals are used + +Note: Each uart controller should have an alias correctly numbered +in "aliases" node. + +Example: + +- From imx51.dtsi: +aliases { + serial0 = &uart1; + serial1 = &uart2; + serial2 = &uart3; +}; + +uart1: serial@73fbc000 { + compatible = "fsl,imx51-uart", "fsl,imx21-uart"; + reg = <0x73fbc000 0x4000>; + interrupts = <31>; + status = "disabled"; +} + +- From imx51-babbage.dts: +uart1: serial@73fbc000 { + fsl,uart-has-rtscts; + status = "okay"; +}; + diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt new file mode 100644 index 0000000000000000000000000000000000000000..6b222f9b8ef535b6477e6c236b4ed8ac43d2fe02 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs4270.txt @@ -0,0 +1,21 @@ +CS4270 audio CODEC + +The driver for this device currently only supports I2C. + +Required properties: + + - compatible : "cirrus,cs4270" + + - reg : the I2C address of the device for I2C + +Optional properties: + + - reset-gpio : a GPIO spec for the reset pin. If specified, it will be + deasserted before communication to the codec starts. + +Example: + +codec: cs4270@48 { + compatible = "cirrus,cs4270"; + reg = <0x48>; +}; diff --git a/Documentation/devicetree/bindings/sound/cs4271.txt b/Documentation/devicetree/bindings/sound/cs4271.txt new file mode 100644 index 0000000000000000000000000000000000000000..c81b5fd5a5bc80459a1b2d626c9f20b5a86bfbe9 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/cs4271.txt @@ -0,0 +1,36 @@ +Cirrus Logic CS4271 DT bindings + +This driver supports both the I2C and the SPI bus. + +Required properties: + + - compatible: "cirrus,cs4271" + +For required properties on SPI, please consult +Documentation/devicetree/bindings/spi/spi-bus.txt + +Required properties on I2C: + + - reg: the i2c address + + +Optional properties: + + - reset-gpio: a GPIO spec to define which pin is connected to the chip's + !RESET pin + +Examples: + + codec_i2c: cs4271@10 { + compatible = "cirrus,cs4271"; + reg = <0x10>; + reset-gpio = <&gpio 23 0>; + }; + + codec_spi: cs4271@0 { + compatible = "cirrus,cs4271"; + reg = <0x0>; + reset-gpio = <&gpio 23 0>; + spi-max-frequency = <6000000>; + }; + diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt new file mode 100644 index 0000000000000000000000000000000000000000..374e145c2ef170ceaa32055cf01836bfb3f8c3ef --- /dev/null +++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt @@ -0,0 +1,45 @@ +Texas Instruments McASP controller + +Required properties: +- compatible : + "ti,dm646x-mcasp-audio" : for DM646x platforms + "ti,da830-mcasp-audio" : for both DA830 & DA850 platforms + "ti,omap2-mcasp-audio" : for OMAP2 platforms (TI81xx, AM33xx) + +- reg : Should contain McASP registers offset and length +- interrupts : Interrupt number for McASP +- op-mode : I2S/DIT ops mode. +- tdm-slots : Slots for TDM operation. +- num-serializer : Serializers used by McASP. +- serial-dir : A list of serializer pin mode. The list number should be equal + to "num-serializer" parameter. Each entry is a number indication + serializer pin direction. (0 - INACTIVE, 1 - TX, 2 - RX) + + +Optional properties: + +- ti,hwmods : Must be "mcasp", n is controller instance starting 0 +- tx-num-evt : FIFO levels. +- rx-num-evt : FIFO levels. +- sram-size-playback : size of sram to be allocated during playback +- sram-size-capture : size of sram to be allocated during capture + +Example: + +mcasp0: mcasp0@1d00000 { + compatible = "ti,da830-mcasp-audio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x100000 0x3000>; + interrupts = <82 83>; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + num-serializer = <16>; + serial-dir = < + 0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 0 0 + 0 0 0 1 + 2 0 0 0 >; + tx-num-evt = <1>; + rx-num-evt = <1>; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt new file mode 100644 index 0000000000000000000000000000000000000000..65dec876cb2d792813abc050833950ef48b53a66 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt @@ -0,0 +1,91 @@ +* Texas Instruments OMAP4+ and twl6040 based audio setups + +Required properties: +- compatible: "ti,abe-twl6040" +- ti,model: Name of the sound card ( for example "SDP4430") +- ti,mclk-freq: MCLK frequency for HPPLL operation +- ti,mcpdm: phandle for the McPDM node +- ti,twl6040: phandle for the twl6040 core node +- ti,audio-routing: List of connections between audio components. + Each entry is a pair of strings, the first being the connection's sink, + the second being the connection's source. + +Optional properties: +- ti,dmic: phandle for the OMAP dmic node if the machine have it connected +- ti,jack_detection: Need to be set to <1> if the board capable to detect jack + insertion, removal. + +Available audio endpoints for the audio-routing table: + +Board connectors: + * Headset Stereophone + * Earphone Spk + * Ext Spk + * Line Out + * Vibrator + * Headset Mic + * Main Handset Mic + * Sub Handset Mic + * Line In + * Digital Mic + +twl6040 pins: + * HSOL + * HSOR + * EP + * HFL + * HFR + * AUXL + * AUXR + * VIBRAL + * VIBRAR + * HSMIC + * MAINMIC + * SUBMIC + * AFML + * AFMR + + * Headset Mic Bias + * Main Mic Bias + * Digital Mic1 Bias + * Digital Mic2 Bias + +Digital mic pins: + * DMic + +Example: + +sound { + compatible = "ti,abe-twl6040"; + ti,model = "SDP4430"; + + ti,jack-detection = <1>; + ti,mclk-freq = <38400000>; + + ti,mcpdm = <&mcpdm>; + ti,dmic = <&dmic>; + + ti,twl6040 = <&twl6040>; + + /* Audio routing */ + ti,audio-routing = + "Headset Stereophone", "HSOL", + "Headset Stereophone", "HSOR", + "Earphone Spk", "EP", + "Ext Spk", "HFL", + "Ext Spk", "HFR", + "Line Out", "AUXL", + "Line Out", "AUXR", + "Vibrator", "VIBRAL", + "Vibrator", "VIBRAR", + "HSMIC", "Headset Mic", + "Headset Mic", "Headset Mic Bias", + "MAINMIC", "Main Handset Mic", + "Main Handset Mic", "Main Mic Bias", + "SUBMIC", "Sub Handset Mic", + "Sub Handset Mic", "Main Mic Bias", + "AFML", "Line In", + "AFMR", "Line In", + "DMic", "Digital Mic", + "Digital Mic", "Digital Mic1 Bias"; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-mcbsp.txt b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt new file mode 100644 index 0000000000000000000000000000000000000000..17cce44904564b0bf2d24cb8c77774292e203bed --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt @@ -0,0 +1,37 @@ +* Texas Instruments OMAP2+ McBSP module + +Required properties: +- compatible: "ti,omap2420-mcbsp" for McBSP on OMAP2420 + "ti,omap2430-mcbsp" for McBSP on OMAP2430 + "ti,omap3-mcbsp" for McBSP on OMAP3 + "ti,omap4-mcbsp" for McBSP on OMAP4 and newer SoC +- reg: Register location and size, for OMAP4+ as an array: + , + ; +- reg-names: Array of strings associated with the address space +- interrupts: Interrupt numbers for the McBSP port, as an array in case the + McBSP IP have more interrupt lines: + , + , + ; +- interrupt-names: Array of strings associated with the interrupt numbers +- interrupt-parent: The parent interrupt controller +- ti,buffer-size: Size of the FIFO on the port (OMAP2430 and newer SoC) +- ti,hwmods: Name of the hwmod associated to the McBSP port + +Example: + +mcbsp2: mcbsp@49022000 { + compatible = "ti,omap3-mcbsp"; + reg = <0x49022000 0xff>, + <0x49028000 0xff>; + reg-names = "mpu", "sidetone"; + interrupts = <0 17 0x4>, /* OCP compliant interrupt */ + <0 62 0x4>, /* TX interrupt */ + <0 63 0x4>, /* RX interrupt */ + <0 4 0x4>; /* Sidetone */ + interrupt-names = "common", "tx", "rx", "sidetone"; + interrupt-parent = <&intc>; + ti,buffer-size = <1280>; + ti,hwmods = "mcbsp2"; +}; diff --git a/Documentation/devicetree/bindings/sound/omap-twl4030.txt b/Documentation/devicetree/bindings/sound/omap-twl4030.txt new file mode 100644 index 0000000000000000000000000000000000000000..6fae51c7f766fe995ba96627cde3f1bfeb661426 --- /dev/null +++ b/Documentation/devicetree/bindings/sound/omap-twl4030.txt @@ -0,0 +1,17 @@ +* Texas Instruments SoC with twl4030 based audio setups + +Required properties: +- compatible: "ti,omap-twl4030" +- ti,model: Name of the sound card (for example "omap3beagle") +- ti,mcbsp: phandle for the McBSP node +- ti,codec: phandle for the twl4030 audio node + +Example: + +sound { + compatible = "ti,omap-twl4030"; + ti,model = "omap3beagle"; + + ti,mcbsp = <&mcbsp2>; + ti,codec = <&twl_audio>; +}; diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt new file mode 100644 index 0000000000000000000000000000000000000000..e7b98f41fa5fd14eba634184848529f1b519a68c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt @@ -0,0 +1,20 @@ +Texas Instruments - tlv320aic3x Codec module + +The tlv320aic3x serial control bus communicates through I2C protocols + +Required properties: +- compatible - "string" - "ti,tlv320aic3x" +- reg - - I2C slave address + + +Optional properties: + +- gpio-reset - gpio pin number used for codec reset +- ai3x-gpio-func - - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality + +Example: + +tlv320aic3x: tlv320aic3x@1b { + compatible = "ti,tlv320aic3x"; + reg = <0x1b>; +}; diff --git a/Documentation/devicetree/bindings/spi/spi-octeon.txt b/Documentation/devicetree/bindings/spi/spi-octeon.txt new file mode 100644 index 0000000000000000000000000000000000000000..431add192342ec320b4e0718b22f45aa4f7630c5 --- /dev/null +++ b/Documentation/devicetree/bindings/spi/spi-octeon.txt @@ -0,0 +1,33 @@ +Cavium, Inc. OCTEON SOC SPI master controller. + +Required properties: +- compatible : "cavium,octeon-3010-spi" +- reg : The register base for the controller. +- interrupts : One interrupt, used by the controller. +- #address-cells : <1>, as required by generic SPI binding. +- #size-cells : <0>, also as required by generic SPI binding. + +Child nodes as per the generic SPI binding. + +Example: + + spi@1070000001000 { + compatible = "cavium,octeon-3010-spi"; + reg = <0x10700 0x00001000 0x0 0x100>; + interrupts = <0 58>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@0 { + compatible = "st,m95256", "atmel,at25"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + spi-cpol; + + pagesize = <64>; + size = <32768>; + address-width = <16>; + }; + }; + diff --git a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt index 2de21c2acf55d022681059e3ec690b1ed623e1cd..844bd5fbd04c13c0d5a511c7a333f19c37699e48 100644 --- a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt +++ b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt @@ -7,7 +7,7 @@ free running counter values, and generates an interrupt. Required properties: -- compatible : should be "brcm,bcm2835-system-timer.txt" +- compatible : should be "brcm,bcm2835-system-timer" - reg : Specifies base physical address and size of the registers. - interrupts : A list of 4 interrupt sinks; one per timer channel. - clock-frequency : The frequency of the clock that drives the counter, in Hz. diff --git a/Documentation/devicetree/bindings/video/backlight/88pm860x.txt b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt new file mode 100644 index 0000000000000000000000000000000000000000..261df2799315b2b645f54454a1ef6f5e1bb42766 --- /dev/null +++ b/Documentation/devicetree/bindings/video/backlight/88pm860x.txt @@ -0,0 +1,15 @@ +88pm860x-backlight bindings + +Optional properties: + - marvell,88pm860x-iset: Current supplies on backlight device. + - marvell,88pm860x-pwm: PWM frequency on backlight device. + +Example: + + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; diff --git a/Documentation/driver-model/devres.txt b/Documentation/driver-model/devres.txt index 950856bd2e39dd105ea39008df8e0b875604689d..43cff70465abb4b796b9f302d5bf4d2b9cfa987e 100644 --- a/Documentation/driver-model/devres.txt +++ b/Documentation/driver-model/devres.txt @@ -284,3 +284,7 @@ CLOCK PINCTRL devm_pinctrl_get() devm_pinctrl_put() + +PWM + devm_pwm_get() + devm_pwm_put() diff --git a/Documentation/dvb/README.dvb-usb b/Documentation/dvb/README.dvb-usb index c4d963a67d6ffc1ec7e54b8d31cc7d9b41537796..8eb92264ee047163caa25738a30c09ad04d20fcc 100644 --- a/Documentation/dvb/README.dvb-usb +++ b/Documentation/dvb/README.dvb-usb @@ -30,7 +30,7 @@ with the device via the bus. The connection between the DVB-API-functionality is done via callbacks, assigned in a static device-description (struct dvb_usb_device) each device-driver has to have. -For an example have a look in drivers/media/dvb/dvb-usb/vp7045*. +For an example have a look in drivers/media/usb/dvb-usb/vp7045*. Objective is to migrate all the usb-devices (dibusb, cinergyT2, maybe the ttusb; flexcop-usb already benefits from the generic flexcop-device) to use diff --git a/Documentation/dvb/get_dvb_firmware b/Documentation/dvb/get_dvb_firmware index 12d3952e83d5b0305c26afba116047aabf3c2850..32bc56b13b1c7c527669d0a2525486f46115faee 100755 --- a/Documentation/dvb/get_dvb_firmware +++ b/Documentation/dvb/get_dvb_firmware @@ -116,7 +116,7 @@ sub tda10045 { sub tda10046 { my $sourcefile = "TT_PCI_2.19h_28_11_2006.zip"; - my $url = "http://www.tt-download.com/download/updates/219/$sourcefile"; + my $url = "http://technotrend.com.ua/download/software/219/$sourcefile"; my $hash = "6a7e1e2f2644b162ff0502367553c72d"; my $outfile = "dvb-fe-tda10046.fw"; my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1); diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 1b7f9acbcbbe450c8d0f3f8a16d592275c61a5dd..104322bf378c314061ae906433e0e81a9abde7e0 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -375,6 +375,16 @@ dioread_nolock locking. If the dioread_nolock option is specified Because of the restrictions this options comprises it is off by default (e.g. dioread_lock). +max_dir_size_kb=n This limits the size of directories so that any + attempt to expand them beyond the specified + limit in kilobytes will cause an ENOSPC error. + This is useful in memory constrained + environments, where a very large directory can + cause severe performance problems or even + provoke the Out Of Memory killer. (For example, + if there is only 512mb memory available, a 176mb + directory may seriously cramp the system's style.) + i_version Enable 64-bit inode version support. This option is off by default. diff --git a/Documentation/filesystems/jfs.txt b/Documentation/filesystems/jfs.txt index 26ebde77e821cecf11062032dfec702513eecd66..f7433355394abf95aa32ea2590e4fe749b32435e 100644 --- a/Documentation/filesystems/jfs.txt +++ b/Documentation/filesystems/jfs.txt @@ -3,6 +3,7 @@ IBM's Journaled File System (JFS) for Linux JFS Homepage: http://jfs.sourceforge.net/ The following mount options are supported: +(*) == default iocharset=name Character set to use for converting from Unicode to ASCII. The default is to do no conversion. Use @@ -21,12 +22,12 @@ nointegrity Do not write to the journal. The primary use of this option from backup media. The integrity of the volume is not guaranteed if the system abnormally abends. -integrity Default. Commit metadata changes to the journal. Use this - option to remount a volume where the nointegrity option was +integrity(*) Commit metadata changes to the journal. Use this option to + remount a volume where the nointegrity option was previously specified in order to restore normal behavior. errors=continue Keep going on a filesystem error. -errors=remount-ro Default. Remount the filesystem read-only on an error. +errors=remount-ro(*) Remount the filesystem read-only on an error. errors=panic Panic and halt the machine if an error occurs. uid=value Override on-disk uid with specified value @@ -35,7 +36,17 @@ umask=value Override on-disk umask with specified octal value. For directories, the execute bit will be set if the corresponding read bit is set. -Please send bugs, comments, cards and letters to shaggy@linux.vnet.ibm.com. +discard=minlen This enables/disables the use of discard/TRIM commands. +discard The discard/TRIM commands are sent to the underlying +nodiscard(*) block device when blocks are freed. This is useful for SSD + devices and sparse/thinly-provisioned LUNs. The FITRIM ioctl + command is also available together with the nodiscard option. + The value of minlen specifies the minimum blockcount, when + a TRIM command to the block device is considered usefull. + When no value is given to the discard option, it defaults to + 64 blocks, which means 256KiB in JFS. + The minlen value of discard overrides the minlen value given + on an FITRIM ioctl(). The JFS mailing list can be subscribed to by using the link labeled "Mail list Subscribe" at our web page http://jfs.sourceforge.net/ diff --git a/Documentation/filesystems/nfs/nfs.txt b/Documentation/filesystems/nfs/nfs.txt index f50f26ce6cd09af07d0b88ac7fa42a928a01bf79..f2571c8bef74e5ba5b156affea41568dee4f845e 100644 --- a/Documentation/filesystems/nfs/nfs.txt +++ b/Documentation/filesystems/nfs/nfs.txt @@ -12,9 +12,47 @@ and work is in progress on adding support for minor version 1 of the NFSv4 protocol. The purpose of this document is to provide information on some of the -upcall interfaces that are used in order to provide the NFS client with -some of the information that it requires in order to fully comply with -the NFS spec. +special features of the NFS client that can be configured by system +administrators. + + +The nfs4_unique_id parameter +============================ + +NFSv4 requires clients to identify themselves to servers with a unique +string. File open and lock state shared between one client and one server +is associated with this identity. To support robust NFSv4 state recovery +and transparent state migration, this identity string must not change +across client reboots. + +Without any other intervention, the Linux client uses a string that contains +the local system's node name. System administrators, however, often do not +take care to ensure that node names are fully qualified and do not change +over the lifetime of a client system. Node names can have other +administrative requirements that require particular behavior that does not +work well as part of an nfs_client_id4 string. + +The nfs.nfs4_unique_id boot parameter specifies a unique string that can be +used instead of a system's node name when an NFS client identifies itself to +a server. Thus, if the system's node name is not unique, or it changes, its +nfs.nfs4_unique_id stays the same, preventing collision with other clients +or loss of state during NFS reboot recovery or transparent state migration. + +The nfs.nfs4_unique_id string is typically a UUID, though it can contain +anything that is believed to be unique across all NFS clients. An +nfs4_unique_id string should be chosen when a client system is installed, +just as a system's root file system gets a fresh UUID in its label at +install time. + +The string should remain fixed for the lifetime of the client. It can be +changed safely if care is taken that the client shuts down cleanly and all +outstanding NFSv4 state has expired, to prevent loss of NFSv4 state. + +This string can be stored in an NFS client's grub.conf, or it can be provided +via a net boot facility such as PXE. It may also be specified as an nfs.ko +module parameter. Specifying a uniquifier string is not support for NFS +clients running in containers. + The DNS resolver ================ diff --git a/Documentation/filesystems/nfs/nfsd-admin-interfaces.txt b/Documentation/filesystems/nfs/nfsd-admin-interfaces.txt new file mode 100644 index 0000000000000000000000000000000000000000..56a96fb08a73dd7186cc09d94c47d61dd1655303 --- /dev/null +++ b/Documentation/filesystems/nfs/nfsd-admin-interfaces.txt @@ -0,0 +1,41 @@ +Administrative interfaces for nfsd +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Note that normally these interfaces are used only by the utilities in +nfs-utils. + +nfsd is controlled mainly by pseudofiles under the "nfsd" filesystem, +which is normally mounted at /proc/fs/nfsd/. + +The server is always started by the first write of a nonzero value to +nfsd/threads. + +Before doing that, NFSD can be told which sockets to listen on by +writing to nfsd/portlist; that write may be: + + - an ascii-encoded file descriptor, which should refer to a + bound (and listening, for tcp) socket, or + - "transportname port", where transportname is currently either + "udp", "tcp", or "rdma". + +If nfsd is started without doing any of these, then it will create one +udp and one tcp listener at port 2049 (see nfsd_init_socks). + +On startup, nfsd and lockd grace periods start. + +nfsd is shut down by a write of 0 to nfsd/threads. All locks and state +are thrown away at that point. + +Between startup and shutdown, the number of threads may be adjusted up +or down by additional writes to nfsd/threads or by writes to +nfsd/pool_threads. + +For more detail about files under nfsd/ and what they control, see +fs/nfsd/nfsctl.c; most of them have detailed comments. + +Implementation notes +^^^^^^^^^^^^^^^^^^^^ + +Note that the rpc server requires the caller to serialize addition and +removal of listening sockets, and startup and shutdown of the server. +For nfsd this is done using nfsd_mutex. diff --git a/Documentation/filesystems/proc.txt b/Documentation/filesystems/proc.txt index fb0a6aeb936c86237fe19bcdf630339fc43ad348..a1793d670cd01bd374eddf54ffdfc768504291ff 100644 --- a/Documentation/filesystems/proc.txt +++ b/Documentation/filesystems/proc.txt @@ -33,7 +33,7 @@ Table of Contents 2 Modifying System Parameters 3 Per-Process Parameters - 3.1 /proc//oom_adj & /proc//oom_score_adj - Adjust the oom-killer + 3.1 /proc//oom_score_adj - Adjust the oom-killer score 3.2 /proc//oom_score - Display current oom-killer score 3.3 /proc//io - Display the IO accounting fields @@ -1320,10 +1320,10 @@ of the kernel. CHAPTER 3: PER-PROCESS PARAMETERS ------------------------------------------------------------------------------ -3.1 /proc//oom_adj & /proc//oom_score_adj- Adjust the oom-killer score +3.1 /proc//oom_score_adj- Adjust the oom-killer score -------------------------------------------------------------------------------- -These file can be used to adjust the badness heuristic used to select which +This file can be used to adjust the badness heuristic used to select which process gets killed in out of memory conditions. The badness heuristic assigns a value to each candidate task ranging from 0 @@ -1361,22 +1361,10 @@ same system, cpuset, mempolicy, or memory controller resources to use at least equivalent to discounting 50% of the task's allowed memory from being considered as scoring against the task. -For backwards compatibility with previous kernels, /proc//oom_adj may also -be used to tune the badness score. Its acceptable values range from -16 -(OOM_ADJUST_MIN) to +15 (OOM_ADJUST_MAX) and a special value of -17 -(OOM_DISABLE) to disable oom killing entirely for that task. Its value is -scaled linearly with /proc//oom_score_adj. - -Writing to /proc//oom_score_adj or /proc//oom_adj will change the -other with its scaled value. - The value of /proc//oom_score_adj may be reduced no lower than the last value set by a CAP_SYS_RESOURCE process. To reduce the value any lower requires CAP_SYS_RESOURCE. -NOTICE: /proc//oom_adj is deprecated and will be removed, please see -Documentation/feature-removal-schedule.txt. - Caveat: when a parent task is selected, the oom killer will sacrifice any first generation children with separate address spaces instead, if possible. This avoids servers and important system daemons from being killed and loses the @@ -1387,9 +1375,7 @@ minimal amount of work. ------------------------------------------------------------- This file can be used to check the current score used by the oom-killer is for -any given . Use it together with /proc//oom_adj to tune which -process should be killed in an out-of-memory situation. - +any given . 3.3 /proc//io - Display the IO accounting fields ------------------------------------------------------- diff --git a/Documentation/hwmon/da9052 b/Documentation/hwmon/da9052 index ef898553638ef960840202892a0060343c57981a..5bc51346b6897aead6100151d4faaab80722c694 100644 --- a/Documentation/hwmon/da9052 +++ b/Documentation/hwmon/da9052 @@ -56,6 +56,6 @@ The junction temperature is calculated: The junction temperature attribute is supported by the driver. The battery temperature is calculated: - Degree Celcius = 1 / (t1 + 1/298)- 273 + Degree Celsius = 1 / (t1 + 1/298)- 273 where t1 = (1/B)* ln(( ADCval * 2.5)/(R25*ITBAT*255)) Default values of R25, B, ITBAT are 10e3, 3380 and 50e-6 respectively. diff --git a/Documentation/hwmon/max1619 b/Documentation/hwmon/max1619 index d6f8d9cd7d7f54dd7b78fb3d2207bee09e5b4f4e..e6d87398cc8f01e8c450713f5933347627d05752 100644 --- a/Documentation/hwmon/max1619 +++ b/Documentation/hwmon/max1619 @@ -9,7 +9,7 @@ Supported chips: http://pdfserv.maxim-ic.com/en/ds/MAX1619.pdf Authors: - Alexey Fisher , + Oleksij Rempel , Jean Delvare Description diff --git a/Documentation/hwmon/twl4030-madc-hwmon b/Documentation/hwmon/twl4030-madc-hwmon index ef7984317cecb29eca6ef23a30c21d920e66ef31..c3a3a5be10adc8785afa17db28c9bbc4b47aec33 100644 --- a/Documentation/hwmon/twl4030-madc-hwmon +++ b/Documentation/hwmon/twl4030-madc-hwmon @@ -41,5 +41,5 @@ Channel Signal The Sysfs nodes will represent the voltage in the units of mV, the temperature channel shows the converted temperature in -degree celcius. The Battery charging current channel represents +degree Celsius. The Battery charging current channel represents battery charging current in mA. diff --git a/Documentation/i2c/busses/i2c-viapro b/Documentation/i2c/busses/i2c-viapro index 2e758b0e94564042d14d1d763d6a11fc998c181d..b88f91ae580ef53c72b5081d93f392c4b9d05278 100644 --- a/Documentation/i2c/busses/i2c-viapro +++ b/Documentation/i2c/busses/i2c-viapro @@ -20,7 +20,10 @@ Supported adapters: Datasheet: available on http://linux.via.com.tw * VIA Technologies, Inc. VX855/VX875 - Datasheet: Availability unknown + Datasheet: available on http://linux.via.com.tw + + * VIA Technologies, Inc. VX900 + Datasheet: available on http://linux.via.com.tw Authors: Kyösti Mälkki , @@ -57,6 +60,7 @@ Your lspci -n listing must show one of these : device 1106:8324 (CX700) device 1106:8353 (VX800/VX820) device 1106:8409 (VX855/VX875) + device 1106:8410 (VX900) If none of these show up, you should look in the BIOS for settings like enable ACPI / SMBus or even USB. diff --git a/Documentation/i2c/muxes/i2c-mux-gpio b/Documentation/i2c/muxes/i2c-mux-gpio index bd9b2299b73992036f39bdbaf4af2667eba0e575..d4d91a53fc39b4c4acd99b6964cf3c2129d601ab 100644 --- a/Documentation/i2c/muxes/i2c-mux-gpio +++ b/Documentation/i2c/muxes/i2c-mux-gpio @@ -63,3 +63,21 @@ static struct platform_device myboard_i2cmux = { .platform_data = &myboard_i2cmux_data, }, }; + +If you don't know the absolute GPIO pin numbers at registration time, +you can instead provide a chip name (.chip_name) and relative GPIO pin +numbers, and the i2c-gpio-mux driver will do the work for you, +including deferred probing if the GPIO chip isn't immediately +available. + +Device Registration +------------------- + +When registering your i2c-gpio-mux device, you should pass the number +of any GPIO pin it uses as the device ID. This guarantees that every +instance has a different ID. + +Alternatively, if you don't need a stable device name, you can simply +pass PLATFORM_DEVID_AUTO as the device ID, and the platform core will +assign a dynamic ID to your device. If you do not know the absolute +GPIO pin numbers at registration time, this is even the only option. diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 849b771c5e03620799cbdce625e16bab7ffa275b..2152b0e7237db87a60ef4897a949974f0c2b8d2d 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -178,7 +178,6 @@ Code Seq#(hex) Include File Comments 'V' C0 linux/ivtv.h conflict! 'V' C0 media/davinci/vpfe_capture.h conflict! 'V' C0 media/si4713.h conflict! -'V' C0-CF drivers/media/video/mxb.h conflict! 'W' 00-1F linux/watchdog.h conflict! 'W' 00-1F linux/wanrouter.h conflict! 'W' 00-3F sound/asound.h conflict! @@ -204,8 +203,6 @@ Code Seq#(hex) Include File Comments 'c' A0-AF arch/x86/include/asm/msr.h conflict! 'd' 00-FF linux/char/drm/drm/h conflict! 'd' 02-40 pcmcia/ds.h conflict! -'d' 10-3F drivers/media/video/dabusb.h conflict! -'d' C0-CF drivers/media/video/saa7191.h conflict! 'd' F0-FF linux/digi1.h 'e' all linux/digi1.h conflict! 'e' 00-1F drivers/net/irda/irtty-sir.h conflict! @@ -267,9 +264,7 @@ Code Seq#(hex) Include File Comments 'v' 00-1F linux/ext2_fs.h conflict! 'v' 00-1F linux/fs.h conflict! 'v' 00-0F linux/sonypi.h conflict! -'v' C0-DF media/pwc-ioctl.h conflict! 'v' C0-FF linux/meye.h conflict! -'v' D0-DF drivers/media/video/cpia2/cpia2dev.h conflict! 'w' all CERN SCI driver 'y' 00-1F packet based user level communications diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt index ab0a984530d87848435571d857b201484591f73c..ec9ae67086911efa3022b912f1a30bfeb3aea976 100644 --- a/Documentation/kbuild/makefiles.txt +++ b/Documentation/kbuild/makefiles.txt @@ -45,7 +45,7 @@ This document describes the Linux kernel Makefiles. === 7 Kbuild syntax for exported headers --- 7.1 header-y - --- 7.2 objhdr-y + --- 7.2 genhdr-y --- 7.3 destination-y --- 7.4 generic-y @@ -1282,15 +1282,15 @@ See subsequent chapter for the syntax of the Kbuild file. Subdirectories are visited before their parent directories. - --- 7.2 objhdr-y + --- 7.2 genhdr-y - objhdr-y specifies generated files to be exported. + genhdr-y specifies generated files to be exported. Generated files are special as they need to be looked up in another directory when doing 'make O=...' builds. Example: #include/linux/Kbuild - objhdr-y += version.h + genhdr-y += version.h --- 7.3 destination-y diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index df43807bb5daf788eebe34a3600c5ca9a78d0bfd..9776f068306b7f7ec6425ec4c02b17f5dac4788a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1051,6 +1051,14 @@ bytes respectively. Such letter suffixes can also be entirely omitted. ihash_entries= [KNL] Set number of hash buckets for inode cache. + ima_appraise= [IMA] appraise integrity measurements + Format: { "off" | "enforce" | "fix" } + default: "enforce" + + ima_appraise_tcb [IMA] + The builtin appraise policy appraises all files + owned by uid=0. + ima_audit= [IMA] Format: { "0" | "1" } 0 -- integrity auditing messages. (Default) @@ -1350,6 +1358,9 @@ bytes respectively. Such letter suffixes can also be entirely omitted. * nohrst, nosrst, norst: suppress hard, soft and both resets. + * rstonce: only attempt one reset during + hot-unplug link recovery + * dump_id: dump IDENTIFY data. If there are multiple matching configurations changing @@ -1582,6 +1593,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. log everything. Information is printed at KERN_DEBUG so loglevel=8 may also need to be specified. + module.sig_enforce + [KNL] When CONFIG_MODULE_SIG is set, this means that + modules without (valid) signatures will fail to load. + Note that if CONFIG_MODULE_SIG_ENFORCE is set, that + is always true, so this option does nothing. + mousedev.tap_time= [MOUSE] Maximum time between finger touching and leaving touchpad surface for touch to be considered @@ -1719,6 +1736,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted. will be autodetected by the client, and it will fall back to using the idmapper. To turn off this behaviour, set the value to '0'. + nfs.nfs4_unique_id= + [NFS4] Specify an additional fixed unique ident- + ification string that NFSv4 clients can insert into + their nfs_client_id4 string. This is typically a + UUID that is generated at system install time. nfs.send_implementation_id = [NFSv4.1] Send client implementation identification diff --git a/Documentation/leds/leds-lp5523.txt b/Documentation/leds/leds-lp5523.txt index fad2feb8b7ce2d394b57c8532c6858576023993a..c2743f59f9acb1ce9479ecf7e39926a9caa404a4 100644 --- a/Documentation/leds/leds-lp5523.txt +++ b/Documentation/leds/leds-lp5523.txt @@ -10,8 +10,22 @@ Contact: Samu Onkalo (samu.p.onkalo-at-nokia.com) Description ----------- LP5523 can drive up to 9 channels. Leds can be controlled directly via -the led class control interface. Channels have generic names: -lp5523:channelx where x is 0...8 +the led class control interface. +The name of each channel is configurable in the platform data - name and label. +There are three options to make the channel name. + +a) Define the 'name' in the platform data +To make specific channel name, then use 'name' platform data. +/sys/class/leds/R1 (name: 'R1') +/sys/class/leds/B1 (name: 'B1') + +b) Use the 'label' with no 'name' field +For one device name with channel number, then use 'label'. +/sys/class/leds/RGB:channelN (label: 'RGB', N: 0 ~ 8) + +c) Default +If both fields are NULL, 'lp5523' is used by default. +/sys/class/leds/lp5523:channelN (N: 0 ~ 8) The chip provides 3 engines. Each engine can control channels without interaction from the main CPU. Details of the micro engine code can be found @@ -46,12 +60,13 @@ Note - chan_nr can have values between 0 and 8. static struct lp5523_led_config lp5523_led_config[] = { { + .name = "D1", .chan_nr = 0, .led_current = 50, .max_current = 130, }, ... - }, { + { .chan_nr = 8, .led_current = 50, .max_current = 130, diff --git a/Documentation/memory.txt b/Documentation/memory.txt deleted file mode 100644 index 802efe58647c677df31bb01e943d5174205d28a3..0000000000000000000000000000000000000000 --- a/Documentation/memory.txt +++ /dev/null @@ -1,33 +0,0 @@ -There are several classic problems related to memory on Linux -systems. - - 1) There are some motherboards that will not cache above - a certain quantity of memory. If you have one of these - motherboards, your system will be SLOWER, not faster - as you add more memory. Consider exchanging your - motherboard. - -All of these problems can be addressed with the "mem=XXXM" boot option -(where XXX is the size of RAM to use in megabytes). -It can also tell Linux to use less memory than is actually installed. -If you use "mem=" on a machine with PCI, consider using "memmap=" to avoid -physical address space collisions. - -See the documentation of your boot loader (LILO, grub, loadlin, etc.) about -how to pass options to the kernel. - -There are other memory problems which Linux cannot deal with. Random -corruption of memory is usually a sign of serious hardware trouble. -Try: - - * Reducing memory settings in the BIOS to the most conservative - timings. - - * Adding a cooling fan. - - * Not overclocking your CPU. - - * Having the memory tested in a memory tester or exchanged - with the vendor. Consider testing it with memtest86 yourself. - - * Exchanging your CPU, cache, or motherboard for one that works. diff --git a/Documentation/percpu-rw-semaphore.txt b/Documentation/percpu-rw-semaphore.txt new file mode 100644 index 0000000000000000000000000000000000000000..7d3c82431909dd8120322e2360ce32cbd93f87e5 --- /dev/null +++ b/Documentation/percpu-rw-semaphore.txt @@ -0,0 +1,27 @@ +Percpu rw semaphores +-------------------- + +Percpu rw semaphores is a new read-write semaphore design that is +optimized for locking for reading. + +The problem with traditional read-write semaphores is that when multiple +cores take the lock for reading, the cache line containing the semaphore +is bouncing between L1 caches of the cores, causing performance +degradation. + +Locking for reading is very fast, it uses RCU and it avoids any atomic +instruction in the lock and unlock path. On the other hand, locking for +writing is very expensive, it calls synchronize_rcu() that can take +hundreds of milliseconds. + +The lock is declared with "struct percpu_rw_semaphore" type. +The lock is initialized percpu_init_rwsem, it returns 0 on success and +-ENOMEM on allocation failure. +The lock must be freed with percpu_free_rwsem to avoid memory leak. + +The lock is locked for read with percpu_down_read, percpu_up_read and +for write with percpu_down_write, percpu_up_write. + +The idea of using RCU for optimized rw-lock was introduced by +Eric Dumazet . +The code was written by Mikulas Patocka diff --git a/Documentation/power/power_supply_class.txt b/Documentation/power/power_supply_class.txt index 2f0ddc15b5ac3621a4caaa7933cfbc656b47016b..9c647bd7c5a9cf108746647b8f97ec4b70afe1ab 100644 --- a/Documentation/power/power_supply_class.txt +++ b/Documentation/power/power_supply_class.txt @@ -81,6 +81,9 @@ This defines trickle and fast charges. For batteries that are already charged or discharging, 'n/a' can be displayed (or 'unknown', if the status is not known). +AUTHENTIC - indicates the power supply (battery or charger) connected +to the platform is authentic(1) or non authentic(0). + HEALTH - represents health of the battery, values corresponds to POWER_SUPPLY_HEALTH_*, defined in battery.h. @@ -113,8 +116,12 @@ be negative; there is no empty or full value. It is only useful for relative, time-based measurements. CONSTANT_CHARGE_CURRENT - constant charge current programmed by charger. +CONSTANT_CHARGE_CURRENT_MAX - maximum charge current supported by the +power supply object. CONSTANT_CHARGE_VOLTAGE - constant charge voltage programmed by charger. +CONSTANT_CHARGE_VOLTAGE_MAX - maximum charge voltage supported by the +power supply object. ENERGY_FULL, ENERGY_EMPTY - same as above but for energy. diff --git a/Documentation/printk-formats.txt b/Documentation/printk-formats.txt index 7561d7ed8e11ef25a9a1fb479492148b6f038d5d..8ffb274367c7a4867b1930c9c5bd60ff475bfffb 100644 --- a/Documentation/printk-formats.txt +++ b/Documentation/printk-formats.txt @@ -69,6 +69,7 @@ MAC/FDDI addresses: %pMR 05:04:03:02:01:00 %pMF 00-01-02-03-04-05 %pm 000102030405 + %pmR 050403020100 For printing 6-byte MAC/FDDI addresses in hex notation. The 'M' and 'm' specifiers result in a printed address with ('M') or without ('m') byte diff --git a/Documentation/prio_tree.txt b/Documentation/prio_tree.txt deleted file mode 100644 index 3aa68f9a117b19cac846aabd769d53d46f657e82..0000000000000000000000000000000000000000 --- a/Documentation/prio_tree.txt +++ /dev/null @@ -1,107 +0,0 @@ -The prio_tree.c code indexes vmas using 3 different indexes: - * heap_index = vm_pgoff + vm_size_in_pages : end_vm_pgoff - * radix_index = vm_pgoff : start_vm_pgoff - * size_index = vm_size_in_pages - -A regular radix-priority-search-tree indexes vmas using only heap_index and -radix_index. The conditions for indexing are: - * ->heap_index >= ->left->heap_index && - ->heap_index >= ->right->heap_index - * if (->heap_index == ->left->heap_index) - then ->radix_index < ->left->radix_index; - * if (->heap_index == ->right->heap_index) - then ->radix_index < ->right->radix_index; - * nodes are hashed to left or right subtree using radix_index - similar to a pure binary radix tree. - -A regular radix-priority-search-tree helps to store and query -intervals (vmas). However, a regular radix-priority-search-tree is only -suitable for storing vmas with different radix indices (vm_pgoff). - -Therefore, the prio_tree.c extends the regular radix-priority-search-tree -to handle many vmas with the same vm_pgoff. Such vmas are handled in -2 different ways: 1) All vmas with the same radix _and_ heap indices are -linked using vm_set.list, 2) if there are many vmas with the same radix -index, but different heap indices and if the regular radix-priority-search -tree cannot index them all, we build an overflow-sub-tree that indexes such -vmas using heap and size indices instead of heap and radix indices. For -example, in the figure below some vmas with vm_pgoff = 0 (zero) are -indexed by regular radix-priority-search-tree whereas others are pushed -into an overflow-subtree. Note that all vmas in an overflow-sub-tree have -the same vm_pgoff (radix_index) and if necessary we build different -overflow-sub-trees to handle each possible radix_index. For example, -in figure we have 3 overflow-sub-trees corresponding to radix indices -0, 2, and 4. - -In the final tree the first few (prio_tree_root->index_bits) levels -are indexed using heap and radix indices whereas the overflow-sub-trees below -those levels (i.e. levels prio_tree_root->index_bits + 1 and higher) are -indexed using heap and size indices. In overflow-sub-trees the size_index -is used for hashing the nodes to appropriate places. - -Now, an example prio_tree: - - vmas are represented [radix_index, size_index, heap_index] - i.e., [start_vm_pgoff, vm_size_in_pages, end_vm_pgoff] - -level prio_tree_root->index_bits = 3 ------ - _ - 0 [0,7,7] | - / \ | - ------------------ ------------ | Regular - / \ | radix priority - 1 [1,6,7] [4,3,7] | search tree - / \ / \ | - ------- ----- ------ ----- | heap-and-radix - / \ / \ | indexed - 2 [0,6,6] [2,5,7] [5,2,7] [6,1,7] | - / \ / \ / \ / \ | - 3 [0,5,5] [1,5,6] [2,4,6] [3,4,7] [4,2,6] [5,1,6] [6,0,6] [7,0,7] | - / / / _ - / / / _ - 4 [0,4,4] [2,3,5] [4,1,5] | - / / / | - 5 [0,3,3] [2,2,4] [4,0,4] | Overflow-sub-trees - / / | - 6 [0,2,2] [2,1,3] | heap-and-size - / / | indexed - 7 [0,1,1] [2,0,2] | - / | - 8 [0,0,0] | - _ - -Note that we use prio_tree_root->index_bits to optimize the height -of the heap-and-radix indexed tree. Since prio_tree_root->index_bits is -set according to the maximum end_vm_pgoff mapped, we are sure that all -bits (in vm_pgoff) above prio_tree_root->index_bits are 0 (zero). Therefore, -we only use the first prio_tree_root->index_bits as radix_index. -Whenever index_bits is increased in prio_tree_expand, we shuffle the tree -to make sure that the first prio_tree_root->index_bits levels of the tree -is indexed properly using heap and radix indices. - -We do not optimize the height of overflow-sub-trees using index_bits. -The reason is: there can be many such overflow-sub-trees and all of -them have to be suffled whenever the index_bits increases. This may involve -walking the whole prio_tree in prio_tree_insert->prio_tree_expand code -path which is not desirable. Hence, we do not optimize the height of the -heap-and-size indexed overflow-sub-trees using prio_tree->index_bits. -Instead the overflow sub-trees are indexed using full BITS_PER_LONG bits -of size_index. This may lead to skewed sub-trees because most of the -higher significant bits of the size_index are likely to be 0 (zero). In -the example above, all 3 overflow-sub-trees are skewed. This may marginally -affect the performance. However, processes rarely map many vmas with the -same start_vm_pgoff but different end_vm_pgoffs. Therefore, we normally -do not require overflow-sub-trees to index all vmas. - -From the above discussion it is clear that the maximum height of -a prio_tree can be prio_tree_root->index_bits + BITS_PER_LONG. -However, in most of the common cases we do not need overflow-sub-trees, -so the tree height in the common cases will be prio_tree_root->index_bits. - -It is fair to mention here that the prio_tree_root->index_bits -is increased on demand, however, the index_bits is not decreased when -vmas are removed from the prio_tree. That's tricky to do. Hence, it's -left as a home work problem. - - diff --git a/Documentation/pwm.txt b/Documentation/pwm.txt index 554290ebab94509f6fa9ae603cadfc3b8afcde4a..7d2b4c9b544b3c28596bec44c05a62dfadfdc260 100644 --- a/Documentation/pwm.txt +++ b/Documentation/pwm.txt @@ -36,7 +36,8 @@ Legacy users can request a PWM device using pwm_request() and free it after usage with pwm_free(). New users should use the pwm_get() function and pass to it the consumer -device or a consumer name. pwm_put() is used to free the PWM device. +device or a consumer name. pwm_put() is used to free the PWM device. Managed +variants of these functions, devm_pwm_get() and devm_pwm_put(), also exist. After being requested a PWM has to be configured using: diff --git a/Documentation/ramoops.txt b/Documentation/ramoops.txt index 197ad59ab9bf71cbcfbec783680105967ead06a7..69b3cac4749d76811be9c39a6e3605023a7639fd 100644 --- a/Documentation/ramoops.txt +++ b/Documentation/ramoops.txt @@ -102,9 +102,7 @@ related hangs. The functions call chain log is stored in a "ftrace-ramoops" file. Here is an example of usage: # mount -t debugfs debugfs /sys/kernel/debug/ - # cd /sys/kernel/debug/tracing - # echo function > current_tracer - # echo 1 > options/func_pstore + # echo 1 > /sys/kernel/debug/pstore/record_ftrace # reboot -f [...] # mount -t pstore pstore /mnt/ diff --git a/Documentation/rbtree.txt b/Documentation/rbtree.txt index 8d32d85a523439381273879f363163370bab7a25..61b6c48871a0163a12e4faec50064f61c819b5c6 100644 --- a/Documentation/rbtree.txt +++ b/Documentation/rbtree.txt @@ -193,24 +193,55 @@ Example: Support for Augmented rbtrees ----------------------------- -Augmented rbtree is an rbtree with "some" additional data stored in each node. -This data can be used to augment some new functionality to rbtree. -Augmented rbtree is an optional feature built on top of basic rbtree -infrastructure. An rbtree user who wants this feature will have to call the -augmentation functions with the user provided augmentation callback -when inserting and erasing nodes. - -On insertion, the user must call rb_augment_insert() once the new node is in -place. This will cause the augmentation function callback to be called for -each node between the new node and the root which has been affected by the -insertion. - -When erasing a node, the user must call rb_augment_erase_begin() first to -retrieve the deepest node on the rebalance path. Then, after erasing the -original node, the user must call rb_augment_erase_end() with the deepest -node found earlier. This will cause the augmentation function to be called -for each affected node between the deepest node and the root. - +Augmented rbtree is an rbtree with "some" additional data stored in +each node, where the additional data for node N must be a function of +the contents of all nodes in the subtree rooted at N. This data can +be used to augment some new functionality to rbtree. Augmented rbtree +is an optional feature built on top of basic rbtree infrastructure. +An rbtree user who wants this feature will have to call the augmentation +functions with the user provided augmentation callback when inserting +and erasing nodes. + +C files implementing augmented rbtree manipulation must include + instead of . Note that +linux/rbtree_augmented.h exposes some rbtree implementations details +you are not expected to rely on; please stick to the documented APIs +there and do not include from header files +either so as to minimize chances of your users accidentally relying on +such implementation details. + +On insertion, the user must update the augmented information on the path +leading to the inserted node, then call rb_link_node() as usual and +rb_augment_inserted() instead of the usual rb_insert_color() call. +If rb_augment_inserted() rebalances the rbtree, it will callback into +a user provided function to update the augmented information on the +affected subtrees. + +When erasing a node, the user must call rb_erase_augmented() instead of +rb_erase(). rb_erase_augmented() calls back into user provided functions +to updated the augmented information on affected subtrees. + +In both cases, the callbacks are provided through struct rb_augment_callbacks. +3 callbacks must be defined: + +- A propagation callback, which updates the augmented value for a given + node and its ancestors, up to a given stop point (or NULL to update + all the way to the root). + +- A copy callback, which copies the augmented value for a given subtree + to a newly assigned subtree root. + +- A tree rotation callback, which copies the augmented value for a given + subtree to a newly assigned subtree root AND recomputes the augmented + information for the former subtree root. + +The compiled code for rb_erase_augmented() may inline the propagation and +copy callbacks, which results in a large function, so each augmented rbtree +user should have a single rb_erase_augmented() call site in order to limit +compiled code size. + + +Sample usage: Interval tree is an example of augmented rb tree. Reference - "Introduction to Algorithms" by Cormen, Leiserson, Rivest and Stein. @@ -230,26 +261,132 @@ and its immediate children. And this will be used in O(log n) lookup for lowest match (lowest start address among all possible matches) with something like: -find_lowest_match(lo, hi, node) +struct interval_tree_node * +interval_tree_first_match(struct rb_root *root, + unsigned long start, unsigned long last) { - lowest_match = NULL; - while (node) { - if (max_hi(node->left) > lo) { - // Lowest overlap if any must be on left side - node = node->left; - } else if (overlap(lo, hi, node)) { - lowest_match = node; - break; - } else if (lo > node->lo) { - // Lowest overlap if any must be on right side - node = node->right; - } else { - break; + struct interval_tree_node *node; + + if (!root->rb_node) + return NULL; + node = rb_entry(root->rb_node, struct interval_tree_node, rb); + + while (true) { + if (node->rb.rb_left) { + struct interval_tree_node *left = + rb_entry(node->rb.rb_left, + struct interval_tree_node, rb); + if (left->__subtree_last >= start) { + /* + * Some nodes in left subtree satisfy Cond2. + * Iterate to find the leftmost such node N. + * If it also satisfies Cond1, that's the match + * we are looking for. Otherwise, there is no + * matching interval as nodes to the right of N + * can't satisfy Cond1 either. + */ + node = left; + continue; + } } + if (node->start <= last) { /* Cond1 */ + if (node->last >= start) /* Cond2 */ + return node; /* node is leftmost match */ + if (node->rb.rb_right) { + node = rb_entry(node->rb.rb_right, + struct interval_tree_node, rb); + if (node->__subtree_last >= start) + continue; + } + } + return NULL; /* No match */ + } +} + +Insertion/removal are defined using the following augmented callbacks: + +static inline unsigned long +compute_subtree_last(struct interval_tree_node *node) +{ + unsigned long max = node->last, subtree_last; + if (node->rb.rb_left) { + subtree_last = rb_entry(node->rb.rb_left, + struct interval_tree_node, rb)->__subtree_last; + if (max < subtree_last) + max = subtree_last; + } + if (node->rb.rb_right) { + subtree_last = rb_entry(node->rb.rb_right, + struct interval_tree_node, rb)->__subtree_last; + if (max < subtree_last) + max = subtree_last; + } + return max; +} + +static void augment_propagate(struct rb_node *rb, struct rb_node *stop) +{ + while (rb != stop) { + struct interval_tree_node *node = + rb_entry(rb, struct interval_tree_node, rb); + unsigned long subtree_last = compute_subtree_last(node); + if (node->__subtree_last == subtree_last) + break; + node->__subtree_last = subtree_last; + rb = rb_parent(&node->rb); } - return lowest_match; } -Finding exact match will be to first find lowest match and then to follow -successor nodes looking for exact match, until the start of a node is beyond -the hi value we are looking for. +static void augment_copy(struct rb_node *rb_old, struct rb_node *rb_new) +{ + struct interval_tree_node *old = + rb_entry(rb_old, struct interval_tree_node, rb); + struct interval_tree_node *new = + rb_entry(rb_new, struct interval_tree_node, rb); + + new->__subtree_last = old->__subtree_last; +} + +static void augment_rotate(struct rb_node *rb_old, struct rb_node *rb_new) +{ + struct interval_tree_node *old = + rb_entry(rb_old, struct interval_tree_node, rb); + struct interval_tree_node *new = + rb_entry(rb_new, struct interval_tree_node, rb); + + new->__subtree_last = old->__subtree_last; + old->__subtree_last = compute_subtree_last(old); +} + +static const struct rb_augment_callbacks augment_callbacks = { + augment_propagate, augment_copy, augment_rotate +}; + +void interval_tree_insert(struct interval_tree_node *node, + struct rb_root *root) +{ + struct rb_node **link = &root->rb_node, *rb_parent = NULL; + unsigned long start = node->start, last = node->last; + struct interval_tree_node *parent; + + while (*link) { + rb_parent = *link; + parent = rb_entry(rb_parent, struct interval_tree_node, rb); + if (parent->__subtree_last < last) + parent->__subtree_last = last; + if (start < parent->start) + link = &parent->rb.rb_left; + else + link = &parent->rb.rb_right; + } + + node->__subtree_last = last; + rb_link_node(&node->rb, rb_parent, link); + rb_insert_augmented(&node->rb, root, &augment_callbacks); +} + +void interval_tree_remove(struct interval_tree_node *node, + struct rb_root *root) +{ + rb_erase_augmented(&node->rb, root, &augment_callbacks); +} diff --git a/Documentation/remoteproc.txt b/Documentation/remoteproc.txt index 23a09b884bc76398a6a82bb68933dcba84b4231a..e6469fdcf89a0344b017f90c821019750d8e9039 100644 --- a/Documentation/remoteproc.txt +++ b/Documentation/remoteproc.txt @@ -129,6 +129,13 @@ int dummy_rproc_example(struct rproc *my_rproc) Returns 0 on success and -EINVAL if @rproc isn't valid. + void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type) + - Report a crash in a remoteproc + This function must be called every time a crash is detected by the + platform specific rproc implementation. This should not be called from a + non-remoteproc driver. This function can be called from atomic/interrupt + context. + 5. Implementation callbacks These callbacks should be provided by platform-specific remoteproc diff --git a/Documentation/rtc.txt b/Documentation/rtc.txt index 250160469d83e65c3a5235ee7b00b83b40abb68d..32aa4002de4a9fbd9fe64045119f811df47886ae 100644 --- a/Documentation/rtc.txt +++ b/Documentation/rtc.txt @@ -119,8 +119,9 @@ three different userspace interfaces: * /sys/class/rtc/rtcN ... sysfs attributes support readonly access to some RTC attributes. - * /proc/driver/rtc ... the first RTC (rtc0) may expose itself - using a procfs interface. More information is (currently) shown + * /proc/driver/rtc ... the system clock RTC may expose itself + using a procfs interface. If there is no RTC for the system clock, + rtc0 is used by default. More information is (currently) shown here than through sysfs. The RTC Class framework supports a wide variety of RTCs, ranging from those diff --git a/Documentation/scsi/ChangeLog.megaraid_sas b/Documentation/scsi/ChangeLog.megaraid_sas index 80441ab608e4f04f530119db621ec9e7941545ac..da03146c182ae39dbbe757955faae1c01ae1a0a1 100644 --- a/Documentation/scsi/ChangeLog.megaraid_sas +++ b/Documentation/scsi/ChangeLog.megaraid_sas @@ -1,3 +1,26 @@ +Release Date : Mon. Oct 1, 2012 17:00:00 PST 2012 - + (emaild-id:megaraidlinux@lsi.com) + Adam Radford +Current Version : 06.504.01.00-rc1 +Old Version : 00.00.06.18-rc1 + 1. Removed un-needed completion_lock spinlock calls. + 2. Add module param for configurable MSI-X vector count. + 3. Load io_request DataLength in bytes. + 4. Add array boundary check for SystemPD. + 5. Add SystemPD FastPath support. + 6. Remove duplicate code. + 7. Version, Changelog, Copyright update. +------------------------------------------------------------------------------- +Release Date : Tue. Jun 17, 2012 17:00:00 PST 2012 - + (emaild-id:megaraidlinux@lsi.com) + Adam Radford/Kashyap Desai +Current Version : 00.00.06.18-rc1 +Old Version : 00.00.06.15-rc1 + 1. Fix Copyright dates. + 2. Add throttlequeuedepth module parameter. + 3. Add resetwaittime module parameter. + 4. Move poll_aen_lock initializer. +------------------------------------------------------------------------------- Release Date : Mon. Mar 19, 2012 17:00:00 PST 2012 - (emaild-id:megaraidlinux@lsi.com) Adam Radford diff --git a/Documentation/scsi/LICENSE.qla2xxx b/Documentation/scsi/LICENSE.qla2xxx index ce0fdf349a8159b8f68c0b110567578d9503514f..27a91cf43d6d66ce4137e9335988175b096423a4 100644 --- a/Documentation/scsi/LICENSE.qla2xxx +++ b/Documentation/scsi/LICENSE.qla2xxx @@ -1,4 +1,4 @@ -Copyright (c) 2003-2011 QLogic Corporation +Copyright (c) 2003-2012 QLogic Corporation QLogic Linux FC-FCoE Driver This program includes a device driver for Linux 3.x. diff --git a/Documentation/scsi/LICENSE.qla4xxx b/Documentation/scsi/LICENSE.qla4xxx index ab899591ecb7a93dfe6c8b936042c3b8f400bd42..78c169f0d7c6b5ac0988195bb10d47446993ce4f 100644 --- a/Documentation/scsi/LICENSE.qla4xxx +++ b/Documentation/scsi/LICENSE.qla4xxx @@ -1,4 +1,4 @@ -Copyright (c) 2003-2011 QLogic Corporation +Copyright (c) 2003-2012 QLogic Corporation QLogic Linux iSCSI Driver This program includes a device driver for Linux 3.x. diff --git a/Documentation/scsi/st.txt b/Documentation/scsi/st.txt index 685bf3582abe6104f367a76d48e03c5185bce911..f346abbdd6ff3a7aa16acb197e4dbe7b57d469ea 100644 --- a/Documentation/scsi/st.txt +++ b/Documentation/scsi/st.txt @@ -112,10 +112,8 @@ attempted). MINOR NUMBERS -The tape driver currently supports 128 drives by default. This number -can be increased by editing st.h and recompiling the driver if -necessary. The upper limit is 2^17 drives if 4 modes for each drive -are used. +The tape driver currently supports up to 2^17 drives if 4 modes for +each drive are used. The minor numbers consist of the following bit fields: diff --git a/Documentation/security/Smack.txt b/Documentation/security/Smack.txt index a416479b8a1c23d6755cd5354027159af832a4dc..8a177e4b6e21237e0e03f0410acb70d9282ce014 100644 --- a/Documentation/security/Smack.txt +++ b/Documentation/security/Smack.txt @@ -28,12 +28,11 @@ Smack kernels use the CIPSO IP option. Some network configurations are intolerant of IP options and can impede access to systems that use them as Smack does. -The current git repositories for Smack user space are: +The current git repository for Smack user space is: - git@gitorious.org:meego-platform-security/smackutil.git - git@gitorious.org:meego-platform-security/libsmack.git + git://github.com/smack-team/smack.git -These should make and install on most modern distributions. +This should make and install on most modern distributions. There are three commands included in smackutil: smackload - properly formats data for writing to /smack/load @@ -194,6 +193,9 @@ onlycap these capabilities are effective at for processes with any label. The value is set by writing the desired label to the file or cleared by writing "-" to the file. +revoke-subject + Writing a Smack label here sets the access to '-' for all access + rules with that subject label. You can add access rules in /etc/smack/accesses. They take the form: diff --git a/Documentation/security/keys.txt b/Documentation/security/keys.txt index aa0dbd74b71bdb242009483ce18492796fefa6aa..7d9ca92022d8c97b2f9db88c66713211c9c8cc2a 100644 --- a/Documentation/security/keys.txt +++ b/Documentation/security/keys.txt @@ -412,6 +412,10 @@ The main syscalls are: to the keyring. In this case, an error will be generated if the process does not have permission to write to the keyring. + If the key type supports it, if the description is NULL or an empty + string, the key type will try and generate a description from the content + of the payload. + The payload is optional, and the pointer can be NULL if not required by the type. The payload is plen in size, and plen can be zero for an empty payload. @@ -1114,12 +1118,53 @@ The structure has a number of fields, some of which are mandatory: it should return 0. - (*) int (*instantiate)(struct key *key, const void *data, size_t datalen); + (*) int (*preparse)(struct key_preparsed_payload *prep); + + This optional method permits the key type to attempt to parse payload + before a key is created (add key) or the key semaphore is taken (update or + instantiate key). The structure pointed to by prep looks like: + + struct key_preparsed_payload { + char *description; + void *type_data[2]; + void *payload; + const void *data; + size_t datalen; + size_t quotalen; + }; + + Before calling the method, the caller will fill in data and datalen with + the payload blob parameters; quotalen will be filled in with the default + quota size from the key type and the rest will be cleared. + + If a description can be proposed from the payload contents, that should be + attached as a string to the description field. This will be used for the + key description if the caller of add_key() passes NULL or "". + + The method can attach anything it likes to type_data[] and payload. These + are merely passed along to the instantiate() or update() operations. + + The method should return 0 if success ful or a negative error code + otherwise. + + + (*) void (*free_preparse)(struct key_preparsed_payload *prep); + + This method is only required if the preparse() method is provided, + otherwise it is unused. It cleans up anything attached to the + description, type_data and payload fields of the key_preparsed_payload + struct as filled in by the preparse() method. + + + (*) int (*instantiate)(struct key *key, struct key_preparsed_payload *prep); This method is called to attach a payload to a key during construction. The payload attached need not bear any relation to the data passed to this function. + The prep->data and prep->datalen fields will define the original payload + blob. If preparse() was supplied then other fields may be filled in also. + If the amount of data attached to the key differs from the size in keytype->def_datalen, then key_payload_reserve() should be called. @@ -1135,6 +1180,9 @@ The structure has a number of fields, some of which are mandatory: If this type of key can be updated, then this method should be provided. It is called to update a key's payload from the blob of data provided. + The prep->data and prep->datalen fields will define the original payload + blob. If preparse() was supplied then other fields may be filled in also. + key_payload_reserve() should be called if the data length might change before any changes are actually made. Note that if this succeeds, the type is committed to changing the key because it's already been altered, so all diff --git a/Documentation/smsc_ece1099.txt b/Documentation/smsc_ece1099.txt new file mode 100644 index 0000000000000000000000000000000000000000..6b492e82b43d98b93020e033ea1b108adbbf6033 --- /dev/null +++ b/Documentation/smsc_ece1099.txt @@ -0,0 +1,56 @@ +What is smsc-ece1099? +---------------------- + +The ECE1099 is a 40-Pin 3.3V Keyboard Scan Expansion +or GPIO Expansion device. The device supports a keyboard +scan matrix of 23x8. The device is connected to a Master +via the SMSC BC-Link interface or via the SMBus. +Keypad scan Input(KSI) and Keypad Scan Output(KSO) signals +are multiplexed with GPIOs. + +Interrupt generation +-------------------- + +Interrupts can be generated by an edge detection on a GPIO +pin or an edge detection on one of the bus interface pins. +Interrupts can also be detected on the keyboard scan interface. +The bus interrupt pin (BC_INT# or SMBUS_INT#) is asserted if +any bit in one of the Interrupt Status registers is 1 and +the corresponding Interrupt Mask bit is also 1. + +In order for software to determine which device is the source +of an interrupt, it should first read the Group Interrupt Status Register +to determine which Status register group is a source for the interrupt. +Software should read both the Status register and the associated Mask register, +then AND the two values together. Bits that are 1 in the result of the AND +are active interrupts. Software clears an interrupt by writing a 1 to the +corresponding bit in the Status register. + +Communication Protocol +---------------------- + +- SMbus slave Interface + The host processor communicates with the ECE1099 device + through a series of read/write registers via the SMBus + interface. SMBus is a serial communication protocol between + a computer host and its peripheral devices. The SMBus data + rate is 10KHz minimum to 400 KHz maximum + +- Slave Bus Interface + The ECE1099 device SMBus implementation is a subset of the + SMBus interface to the host. The device is a slave-only SMBus device. + The implementation in the device is a subset of SMBus since it + only supports four protocols. + + The Write Byte, Read Byte, Send Byte, and Receive Byte protocols are the + only valid SMBus protocols for the device. + +- BC-LinkTM Interface + The BC-Link is a proprietary bus that allows communication + between a Master device and a Companion device. The Master + device uses this serial bus to read and write registers + located on the Companion device. The bus comprises three signals, + BC_CLK, BC_DAT and BC_INT#. The Master device always provides the + clock, BC_CLK, and the Companion device is the source for an + independent asynchronous interrupt signal, BC_INT#. The ECE1099 + supports BC-Link speeds up to 24MHz. diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 4e4d0bc9816f9d25f1c185d795f98b476bb50a2c..d90d8ec2853df3e49e18edefc1bffd8995826403 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -860,8 +860,14 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. [Multiple options for each card instance] model - force the model name - position_fix - Fix DMA pointer (0 = auto, 1 = use LPIB, 2 = POSBUF, - 3 = VIACOMBO, 4 = COMBO) + position_fix - Fix DMA pointer + -1 = system default: choose appropriate one per controller + hardware + 0 = auto: falls back to LPIB when POSBUF doesn't work + 1 = use LPIB + 2 = POSBUF: use position buffer + 3 = VIACOMBO: VIA-specific workaround for capture + 4 = COMBO: use LPIB for playback, auto for capture stream probe_mask - Bitmask to probe codecs (default = -1, meaning all slots) When the bit 8 (0x100) is set, the lower 8 bits are used as the "fixed" codec slots; i.e. the driver probes the diff --git a/Documentation/sound/alsa/Channel-Mapping-API.txt b/Documentation/sound/alsa/Channel-Mapping-API.txt new file mode 100644 index 0000000000000000000000000000000000000000..3c43d1a4ca0ea88e91ac62b86d942fadf69888a6 --- /dev/null +++ b/Documentation/sound/alsa/Channel-Mapping-API.txt @@ -0,0 +1,153 @@ +ALSA PCM channel-mapping API +============================ + Takashi Iwai + +GENERAL +------- + +The channel mapping API allows user to query the possible channel maps +and the current channel map, also optionally to modify the channel map +of the current stream. + +A channel map is an array of position for each PCM channel. +Typically, a stereo PCM stream has a channel map of + { front_left, front_right } +while a 4.0 surround PCM stream has a channel map of + { front left, front right, rear left, rear right }. + +The problem, so far, was that we had no standard channel map +explicitly, and applications had no way to know which channel +corresponds to which (speaker) position. Thus, applications applied +wrong channels for 5.1 outputs, and you hear suddenly strange sound +from rear. Or, some devices secretly assume that center/LFE is the +third/fourth channels while others that C/LFE as 5th/6th channels. + +Also, some devices such as HDMI are configurable for different speaker +positions even with the same number of total channels. However, there +was no way to specify this because of lack of channel map +specification. These are the main motivations for the new channel +mapping API. + + +DESIGN +------ + +Actually, "the channel mapping API" doesn't introduce anything new in +the kernel/user-space ABI perspective. It uses only the existing +control element features. + +As a ground design, each PCM substream may contain a control element +providing the channel mapping information and configuration. This +element is specified by: + iface = SNDRV_CTL_ELEM_IFACE_PCM + name = "Playback Channel Map" or "Capture Channel Map" + device = the same device number for the assigned PCM substream + index = the same index number for the assigned PCM substream + +Note the name is different depending on the PCM substream direction. + +Each control element provides at least the TLV read operation and the +read operation. Optionally, the write operation can be provided to +allow user to change the channel map dynamically. + +* TLV + +The TLV operation gives the list of available channel +maps. A list item of a channel map is usually a TLV of + type data-bytes ch0 ch1 ch2... +where type is the TLV type value, the second argument is the total +bytes (not the numbers) of channel values, and the rest are the +position value for each channel. + +As a TLV type, either SNDRV_CTL_TLVT_CHMAP_FIXED, +SNDRV_CTL_TLV_CHMAP_VAR or SNDRV_CTL_TLVT_CHMAP_PAIRED can be used. +The _FIXED type is for a channel map with the fixed channel position +while the latter two are for flexible channel positions. _VAR type is +for a channel map where all channels are freely swappable and _PAIRED +type is where pair-wise channels are swappable. For example, when you +have {FL/FR/RL/RR} channel map, _PAIRED type would allow you to swap +only {RL/RR/FL/FR} while _VAR type would allow even swapping FL and +RR. + +These new TLV types are defined in sound/tlv.h. + +The available channel position values are defined in sound/asound.h, +here is a cut: + +/* channel positions */ +enum { + SNDRV_CHMAP_UNKNOWN = 0, + SNDRV_CHMAP_NA, /* N/A, silent */ + SNDRV_CHMAP_MONO, /* mono stream */ + /* this follows the alsa-lib mixer channel value + 3 */ + SNDRV_CHMAP_FL, /* front left */ + SNDRV_CHMAP_FR, /* front right */ + SNDRV_CHMAP_RL, /* rear left */ + SNDRV_CHMAP_RR, /* rear right */ + SNDRV_CHMAP_FC, /* front center */ + SNDRV_CHMAP_LFE, /* LFE */ + SNDRV_CHMAP_SL, /* side left */ + SNDRV_CHMAP_SR, /* side right */ + SNDRV_CHMAP_RC, /* rear center */ + /* new definitions */ + SNDRV_CHMAP_FLC, /* front left center */ + SNDRV_CHMAP_FRC, /* front right center */ + SNDRV_CHMAP_RLC, /* rear left center */ + SNDRV_CHMAP_RRC, /* rear right center */ + SNDRV_CHMAP_FLW, /* front left wide */ + SNDRV_CHMAP_FRW, /* front right wide */ + SNDRV_CHMAP_FLH, /* front left high */ + SNDRV_CHMAP_FCH, /* front center high */ + SNDRV_CHMAP_FRH, /* front right high */ + SNDRV_CHMAP_TC, /* top center */ + SNDRV_CHMAP_TFL, /* top front left */ + SNDRV_CHMAP_TFR, /* top front right */ + SNDRV_CHMAP_TFC, /* top front center */ + SNDRV_CHMAP_TRL, /* top rear left */ + SNDRV_CHMAP_TRR, /* top rear right */ + SNDRV_CHMAP_TRC, /* top rear center */ + SNDRV_CHMAP_LAST = SNDRV_CHMAP_TRC, +}; + +When a PCM stream can provide more than one channel map, you can +provide multiple channel maps in a TLV container type. The TLV data +to be returned will contain such as: + SNDRV_CTL_TLVT_CONTAINER 96 + SNDRV_CTL_TLVT_CHMAP_FIXED 4 SNDRV_CHMAP_FC + SNDRV_CTL_TLVT_CHMAP_FIXED 8 SNDRV_CHMAP_FL SNDRV_CHMAP_FR + SNDRV_CTL_TLVT_CHMAP_FIXED 16 NDRV_CHMAP_FL SNDRV_CHMAP_FR \ + SNDRV_CHMAP_RL SNDRV_CHMAP_RR + +The channel position is provided in LSB 16bits. The upper bits are +used for bit flags. + +#define SNDRV_CHMAP_POSITION_MASK 0xffff +#define SNDRV_CHMAP_PHASE_INVERSE (0x01 << 16) +#define SNDRV_CHMAP_DRIVER_SPEC (0x02 << 16) + +SNDRV_CHMAP_PHASE_INVERSE indicates the channel is phase inverted, +(thus summing left and right channels would result in almost silence). +Some digital mic devices have this. + +When SNDRV_CHMAP_DRIVER_SPEC is set, all the channel position values +don't follow the standard definition above but driver-specific. + +* READ OPERATION + +The control read operation is for providing the current channel map of +the given stream. The control element returns an integer array +containing the position of each channel. + +When this is performed before the number of the channel is specified +(i.e. hw_params is set), it should return all channels set to +UNKNOWN. + +* WRITE OPERATION + +The control write operation is optional, and only for devices that can +change the channel configuration on the fly, such as HDMI. User needs +to pass an integer value containing the valid channel positions for +all channels of the assigned PCM substream. + +This operation is allowed only at PCM PREPARED state. When called in +other states, it shall return an error. diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index a92bba8168435bc731ce8db34530d55639fa8def..16dfe57f173167c9df59bfdc6c1cefff9db2fa0f 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -74,7 +74,8 @@ CMI9880 AD1882 / AD1882A ================ - 3stack 3-stack mode (default) + 3stack 3-stack mode + 3stack-automute 3-stack with automute front HP (default) 6stack 6-stack mode AD1884A / AD1883 / AD1984A / AD1984B diff --git a/Documentation/sysctl/kernel.txt b/Documentation/sysctl/kernel.txt index 6d78841fd41677d4f81dbcb53eed7ab8602cddb4..2907ba6c3607dfd557e3e4533413b0bea8518a60 100644 --- a/Documentation/sysctl/kernel.txt +++ b/Documentation/sysctl/kernel.txt @@ -181,6 +181,8 @@ core_pattern is used to specify a core dumpfile pattern name. %p pid %u uid %g gid + %d dump mode, matches PR_SET_DUMPABLE and + /proc/sys/fs/suid_dumpable %s signal number %t UNIX time of dump %h hostname diff --git a/Documentation/target/tcm_mod_builder.py b/Documentation/target/tcm_mod_builder.py index a78879b01f09ecb93aedff8ead9e619449851d54..3fe0d812dcecf28262e38e2cfed9d2ff11b41e82 100755 --- a/Documentation/target/tcm_mod_builder.py +++ b/Documentation/target/tcm_mod_builder.py @@ -402,8 +402,6 @@ def tcm_mod_build_configfs(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += " .queue_data_in = " + fabric_mod_name + "_queue_data_in,\n" buf += " .queue_status = " + fabric_mod_name + "_queue_status,\n" buf += " .queue_tm_rsp = " + fabric_mod_name + "_queue_tm_rsp,\n" - buf += " .get_fabric_sense_len = " + fabric_mod_name + "_get_fabric_sense_len,\n" - buf += " .set_fabric_sense_len = " + fabric_mod_name + "_set_fabric_sense_len,\n" buf += " .is_state_remove = " + fabric_mod_name + "_is_state_remove,\n" buf += " /*\n" buf += " * Setup function pointers for generic logic in target_core_fabric_configfs.c\n" @@ -906,20 +904,6 @@ def tcm_mod_dump_fabric_ops(proto_ident, fabric_mod_dir_var, fabric_mod_name): buf += "}\n\n" bufi += "int " + fabric_mod_name + "_queue_tm_rsp(struct se_cmd *);\n" - if re.search('get_fabric_sense_len\)\(', fo): - buf += "u16 " + fabric_mod_name + "_get_fabric_sense_len(void)\n" - buf += "{\n" - buf += " return 0;\n" - buf += "}\n\n" - bufi += "u16 " + fabric_mod_name + "_get_fabric_sense_len(void);\n" - - if re.search('set_fabric_sense_len\)\(', fo): - buf += "u16 " + fabric_mod_name + "_set_fabric_sense_len(struct se_cmd *se_cmd, u32 sense_length)\n" - buf += "{\n" - buf += " return 0;\n" - buf += "}\n\n" - bufi += "u16 " + fabric_mod_name + "_set_fabric_sense_len(struct se_cmd *, u32);\n" - if re.search('is_state_remove\)\(', fo): buf += "int " + fabric_mod_name + "_is_state_remove(struct se_cmd *se_cmd)\n" buf += "{\n" diff --git a/Documentation/thermal/cpu-cooling-api.txt b/Documentation/thermal/cpu-cooling-api.txt new file mode 100644 index 0000000000000000000000000000000000000000..fca24c931ec8dcb737012b6b67f6b88a8fef2223 --- /dev/null +++ b/Documentation/thermal/cpu-cooling-api.txt @@ -0,0 +1,32 @@ +CPU cooling APIs How To +=================================== + +Written by Amit Daniel Kachhap + +Updated: 12 May 2012 + +Copyright (c) 2012 Samsung Electronics Co., Ltd(http://www.samsung.com) + +0. Introduction + +The generic cpu cooling(freq clipping) provides registration/unregistration APIs +to the caller. The binding of the cooling devices to the trip point is left for +the user. The registration APIs returns the cooling device pointer. + +1. cpu cooling APIs + +1.1 cpufreq registration/unregistration APIs +1.1.1 struct thermal_cooling_device *cpufreq_cooling_register( + struct cpumask *clip_cpus) + + This interface function registers the cpufreq cooling device with the name + "thermal-cpufreq-%x". This api can support multiple instances of cpufreq + cooling devices. + + clip_cpus: cpumask of cpus where the frequency constraints will happen. + +1.1.2 void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev) + + This interface function unregisters the "thermal-cpufreq-%x" cooling device. + + cdev: Cooling device pointer which has to be unregistered. diff --git a/Documentation/hwmon/exynos4_tmu b/Documentation/thermal/exynos_thermal similarity index 71% rename from Documentation/hwmon/exynos4_tmu rename to Documentation/thermal/exynos_thermal index c3c6b41db607112d1502feb1b1fb36ed75da2b95..2b46f67b1ccbfbc8ba0c8ec813e7c00f71d5582a 100644 --- a/Documentation/hwmon/exynos4_tmu +++ b/Documentation/thermal/exynos_thermal @@ -46,36 +46,7 @@ The threshold levels are defined as follows: The threshold and each trigger_level are set through the corresponding registers. -When an interrupt occurs, this driver notify user space of -one of four threshold levels for the interrupt -through kobject_uevent_env and sysfs_notify functions. +When an interrupt occurs, this driver notify kernel thermal framework +with the function exynos4_report_trigger. Although an interrupt condition for level_0 can be set, -it is not notified to user space through sysfs_notify function. - -Sysfs Interface ---------------- -name name of the temperature sensor - RO - -temp1_input temperature - RO - -temp1_max temperature for level_1 interrupt - RO - -temp1_crit temperature for level_2 interrupt - RO - -temp1_emergency temperature for level_3 interrupt - RO - -temp1_max_alarm alarm for level_1 interrupt - RO - -temp1_crit_alarm - alarm for level_2 interrupt - RO - -temp1_emergency_alarm - alarm for level_3 interrupt - RO +it can be used to synchronize the cooling action. diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt index c087dbcf3535c2be5da5db5f8feeefaeaea9c88d..ca1a1a34970eae5dc8ddcc8d1d383e2d42be66ae 100644 --- a/Documentation/thermal/sysfs-api.txt +++ b/Documentation/thermal/sysfs-api.txt @@ -84,7 +84,8 @@ temperature) and throttle appropriate devices. 1.3 interface for binding a thermal zone device with a thermal cooling device 1.3.1 int thermal_zone_bind_cooling_device(struct thermal_zone_device *tz, - int trip, struct thermal_cooling_device *cdev); + int trip, struct thermal_cooling_device *cdev, + unsigned long upper, unsigned long lower); This interface function bind a thermal cooling device to the certain trip point of a thermal zone device. @@ -93,6 +94,12 @@ temperature) and throttle appropriate devices. cdev: thermal cooling device trip: indicates which trip point the cooling devices is associated with in this thermal zone. + upper:the Maximum cooling state for this trip point. + THERMAL_NO_LIMIT means no upper limit, + and the cooling device can be in max_state. + lower:the Minimum cooling state can be used for this trip point. + THERMAL_NO_LIMIT means no lower limit, + and the cooling device can be in cooling state 0. 1.3.2 int thermal_zone_unbind_cooling_device(struct thermal_zone_device *tz, int trip, struct thermal_cooling_device *cdev); diff --git a/Documentation/video4linux/CARDLIST.cx23885 b/Documentation/video4linux/CARDLIST.cx23885 index 652aecd131998a7d2958a6a7cc2978e0eeeaa9ae..1299b5e82d7f42450e12eef450dbf6a650823428 100644 --- a/Documentation/video4linux/CARDLIST.cx23885 +++ b/Documentation/video4linux/CARDLIST.cx23885 @@ -35,3 +35,4 @@ 34 -> TerraTec Cinergy T PCIe Dual [153b:117e] 35 -> TeVii S471 [d471:9022] 36 -> Hauppauge WinTV-HVR1255 [0070:2259] + 37 -> Prof Revolution DVB-S2 8000 [8000:3034] diff --git a/Documentation/video4linux/CQcam.txt b/Documentation/video4linux/CQcam.txt index 6e680fec1e9c1d5e43a39e3e160572beb7c1b4c2..0b69e4ee8e312d8dd8e26489b706f83aa6851382 100644 --- a/Documentation/video4linux/CQcam.txt +++ b/Documentation/video4linux/CQcam.txt @@ -18,7 +18,7 @@ Table of Contents 1.0 Introduction - The file ../../drivers/media/video/c-qcam.c is a device driver for + The file ../../drivers/media/parport/c-qcam.c is a device driver for the Logitech (nee Connectix) parallel port interface color CCD camera. This is a fairly inexpensive device for capturing images. Logitech does not currently provide information for developers, but many people diff --git a/Documentation/video4linux/README.davinci-vpbe b/Documentation/video4linux/README.davinci-vpbe index 7a460b0685bb6cfe8d2f631de9ee7a24d9031401..dc9a297f49c3fb0551294b0b89e9b70e0446b1b9 100644 --- a/Documentation/video4linux/README.davinci-vpbe +++ b/Documentation/video4linux/README.davinci-vpbe @@ -5,22 +5,22 @@ File partitioning ----------------- V4L2 display device driver - drivers/media/video/davinci/vpbe_display.c - drivers/media/video/davinci/vpbe_display.h + drivers/media/platform/davinci/vpbe_display.c + drivers/media/platform/davinci/vpbe_display.h VPBE display controller - drivers/media/video/davinci/vpbe.c - drivers/media/video/davinci/vpbe.h + drivers/media/platform/davinci/vpbe.c + drivers/media/platform/davinci/vpbe.h VPBE venc sub device driver - drivers/media/video/davinci/vpbe_venc.c - drivers/media/video/davinci/vpbe_venc.h - drivers/media/video/davinci/vpbe_venc_regs.h + drivers/media/platform/davinci/vpbe_venc.c + drivers/media/platform/davinci/vpbe_venc.h + drivers/media/platform/davinci/vpbe_venc_regs.h VPBE osd driver - drivers/media/video/davinci/vpbe_osd.c - drivers/media/video/davinci/vpbe_osd.h - drivers/media/video/davinci/vpbe_osd_regs.h + drivers/media/platform/davinci/vpbe_osd.c + drivers/media/platform/davinci/vpbe_osd.h + drivers/media/platform/davinci/vpbe_osd_regs.h Functional partitioning ----------------------- diff --git a/Documentation/video4linux/fimc.txt b/Documentation/video4linux/fimc.txt index eb049708f3e4b10b3464f6eb2f149651cd722893..fd02d9a4930a35bee8407b8fb701a617c7b93d5a 100644 --- a/Documentation/video4linux/fimc.txt +++ b/Documentation/video4linux/fimc.txt @@ -10,7 +10,7 @@ data from LCD controller (FIMD) through the SoC internal writeback data path. There are multiple FIMC instances in the SoCs (up to 4), having slightly different capabilities, like pixel alignment constraints, rotator availability, LCD writeback support, etc. The driver is located at -drivers/media/video/s5p-fimc directory. +drivers/media/platform/s5p-fimc directory. 1. Supported SoCs ================= @@ -36,21 +36,21 @@ Not currently supported: ===================== - media device driver - drivers/media/video/s5p-fimc/fimc-mdevice.[ch] + drivers/media/platform/s5p-fimc/fimc-mdevice.[ch] - camera capture video device driver - drivers/media/video/s5p-fimc/fimc-capture.c + drivers/media/platform/s5p-fimc/fimc-capture.c - MIPI-CSI2 receiver subdev - drivers/media/video/s5p-fimc/mipi-csis.[ch] + drivers/media/platform/s5p-fimc/mipi-csis.[ch] - video post-processor (mem-to-mem) - drivers/media/video/s5p-fimc/fimc-core.c + drivers/media/platform/s5p-fimc/fimc-core.c - common files - drivers/media/video/s5p-fimc/fimc-core.h - drivers/media/video/s5p-fimc/fimc-reg.h - drivers/media/video/s5p-fimc/regs-fimc.h + drivers/media/platform/s5p-fimc/fimc-core.h + drivers/media/platform/s5p-fimc/fimc-reg.h + drivers/media/platform/s5p-fimc/regs-fimc.h 4. User space interfaces ======================== diff --git a/Documentation/video4linux/omap3isp.txt b/Documentation/video4linux/omap3isp.txt index 5dd1439b61fd512b94b3404f959e824ab3816f4d..b9a9f83b1587f40008b3201890f973205d743f80 100644 --- a/Documentation/video4linux/omap3isp.txt +++ b/Documentation/video4linux/omap3isp.txt @@ -12,7 +12,7 @@ Introduction ============ This file documents the Texas Instruments OMAP 3 Image Signal Processor (ISP) -driver located under drivers/media/video/omap3isp. The original driver was +driver located under drivers/media/platform/omap3isp. The original driver was written by Texas Instruments but since that it has been rewritten (twice) at Nokia. diff --git a/Documentation/video4linux/v4l2-controls.txt b/Documentation/video4linux/v4l2-controls.txt index 43da22b8972869c7d283d751674d6633d7cd822d..cfe52c798d743b0979a31c414948a5c72c491e46 100644 --- a/Documentation/video4linux/v4l2-controls.txt +++ b/Documentation/video4linux/v4l2-controls.txt @@ -136,11 +136,25 @@ Or alternatively for integer menu controls, by calling v4l2_ctrl_new_int_menu: const struct v4l2_ctrl_ops *ops, u32 id, s32 max, s32 def, const s64 *qmenu_int); +Standard menu controls with a driver specific menu are added by calling +v4l2_ctrl_new_std_menu_items: + + struct v4l2_ctrl *v4l2_ctrl_new_std_menu_items( + struct v4l2_ctrl_handler *hdl, + const struct v4l2_ctrl_ops *ops, u32 id, s32 max, + s32 skip_mask, s32 def, const char * const *qmenu); + These functions are typically called right after the v4l2_ctrl_handler_init: static const s64 exp_bias_qmenu[] = { -2, -1, 0, 1, 2 }; + static const char * const test_pattern[] = { + "Disabled", + "Vertical Bars", + "Solid Black", + "Solid White", + }; v4l2_ctrl_handler_init(&foo->ctrl_handler, nr_of_controls); v4l2_ctrl_new_std(&foo->ctrl_handler, &foo_ctrl_ops, @@ -156,6 +170,9 @@ These functions are typically called right after the v4l2_ctrl_handler_init: ARRAY_SIZE(exp_bias_qmenu) - 1, ARRAY_SIZE(exp_bias_qmenu) / 2 - 1, exp_bias_qmenu); + v4l2_ctrl_new_std_menu_items(&foo->ctrl_handler, &foo_ctrl_ops, + V4L2_CID_TEST_PATTERN, ARRAY_SIZE(test_pattern) - 1, 0, + 0, test_pattern); ... if (foo->ctrl_handler.error) { int err = foo->ctrl_handler.error; @@ -185,6 +202,13 @@ v4l2_ctrl_new_std_menu in that it doesn't have the mask argument and takes as the last argument an array of signed 64-bit integers that form an exact menu item list. +The v4l2_ctrl_new_std_menu_items function is very similar to +v4l2_ctrl_new_std_menu but takes an extra parameter qmenu, which is the driver +specific menu for an otherwise standard menu control. A good example for this +control is the test pattern control for capture/display/sensors devices that +have the capability to generate test patterns. These test patterns are hardware +specific, so the contents of the menu will vary from device to device. + Note that if something fails, the function will return NULL or an error and set ctrl_handler->error to the error code. If ctrl_handler->error was already set, then it will just return and do nothing. This is also true for @@ -594,7 +618,11 @@ handler and finally add the first handler to the second. For example: v4l2_ctrl_new_std(&radio_ctrl_handler, &radio_ops, V4L2_CID_AUDIO_MUTE, ...); v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_BRIGHTNESS, ...); v4l2_ctrl_new_std(&video_ctrl_handler, &video_ops, V4L2_CID_CONTRAST, ...); - v4l2_ctrl_add_handler(&video_ctrl_handler, &radio_ctrl_handler); + v4l2_ctrl_add_handler(&video_ctrl_handler, &radio_ctrl_handler, NULL); + +The last argument to v4l2_ctrl_add_handler() is a filter function that allows +you to filter which controls will be added. Set it to NULL if you want to add +all controls. Or you can add specific controls to a handler: diff --git a/Documentation/video4linux/v4l2-framework.txt b/Documentation/video4linux/v4l2-framework.txt index 89318be6c1d2117581b0dfbb5fc478370c8e0f5a..32bfe926e8d77717e67a9e485ca89b398f5c26a8 100644 --- a/Documentation/video4linux/v4l2-framework.txt +++ b/Documentation/video4linux/v4l2-framework.txt @@ -583,11 +583,19 @@ You should also set these fields: - name: set to something descriptive and unique. +- vfl_dir: set this to VFL_DIR_RX for capture devices (VFL_DIR_RX has value 0, + so this is normally already the default), set to VFL_DIR_TX for output + devices and VFL_DIR_M2M for mem2mem (codec) devices. + - fops: set to the v4l2_file_operations struct. - ioctl_ops: if you use the v4l2_ioctl_ops to simplify ioctl maintenance (highly recommended to use this and it might become compulsory in the - future!), then set this to your v4l2_ioctl_ops struct. + future!), then set this to your v4l2_ioctl_ops struct. The vfl_type and + vfl_dir fields are used to disable ops that do not match the type/dir + combination. E.g. VBI ops are disabled for non-VBI nodes, and output ops + are disabled for a capture device. This makes it possible to provide + just one v4l2_ioctl_ops struct for both vbi and video nodes. - lock: leave to NULL if you want to do all the locking in the driver. Otherwise you give it a pointer to a struct mutex_lock and before the @@ -1054,4 +1062,4 @@ The first event type in the class is reserved for future use, so the first available event type is 'class base + 1'. An example on how the V4L2 events may be used can be found in the OMAP -3 ISP driver (drivers/media/video/omap3isp). +3 ISP driver (drivers/media/platform/omap3isp). diff --git a/Documentation/video4linux/videobuf b/Documentation/video4linux/videobuf index 1d00d7f15b8f730ee4de10ca2f9f28d5a529eadc..3ffe9e960b6f65e1be78e2480573389f1d940f6c 100644 --- a/Documentation/video4linux/videobuf +++ b/Documentation/video4linux/videobuf @@ -349,7 +349,7 @@ again. Developers who are interested in more information can go into the relevant header files; there are a few low-level functions declared there which have not been talked about here. Also worthwhile is the vivi driver -(drivers/media/video/vivi.c), which is maintained as an example of how V4L2 +(drivers/media/platform/vivi.c), which is maintained as an example of how V4L2 drivers should be written. Vivi only uses the vmalloc() API, but it's good enough to get started with. Note also that all of these calls are exported GPL-only, so they will not be available to non-GPL kernel modules. diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt index bf33aaa4c59f8f2e507fdd3e9c32528b16e831d1..f6ec3a92e62148087b8ac0764e8f916e175d8eb8 100644 --- a/Documentation/virtual/kvm/api.txt +++ b/Documentation/virtual/kvm/api.txt @@ -857,7 +857,8 @@ struct kvm_userspace_memory_region { }; /* for kvm_memory_region::flags */ -#define KVM_MEM_LOG_DIRTY_PAGES 1UL +#define KVM_MEM_LOG_DIRTY_PAGES (1UL << 0) +#define KVM_MEM_READONLY (1UL << 1) This ioctl allows the user to create or modify a guest physical memory slot. When changing an existing slot, it may be moved in the guest @@ -873,14 +874,17 @@ It is recommended that the lower 21 bits of guest_phys_addr and userspace_addr be identical. This allows large pages in the guest to be backed by large pages in the host. -The flags field supports just one flag, KVM_MEM_LOG_DIRTY_PAGES, which -instructs kvm to keep track of writes to memory within the slot. See -the KVM_GET_DIRTY_LOG ioctl. +The flags field supports two flag, KVM_MEM_LOG_DIRTY_PAGES, which instructs +kvm to keep track of writes to memory within the slot. See KVM_GET_DIRTY_LOG +ioctl. The KVM_CAP_READONLY_MEM capability indicates the availability of the +KVM_MEM_READONLY flag. When this flag is set for a memory region, KVM only +allows read accesses. Writes will be posted to userspace as KVM_EXIT_MMIO +exits. -When the KVM_CAP_SYNC_MMU capability, changes in the backing of the memory -region are automatically reflected into the guest. For example, an mmap() -that affects the region will be made visible immediately. Another example -is madvise(MADV_DROP). +When the KVM_CAP_SYNC_MMU capability is available, changes in the backing of +the memory region are automatically reflected into the guest. For example, an +mmap() that affects the region will be made visible immediately. Another +example is madvise(MADV_DROP). It is recommended to use this API instead of the KVM_SET_MEMORY_REGION ioctl. The KVM_SET_MEMORY_REGION does not allow fine grained control over memory @@ -1946,6 +1950,19 @@ the guest using the specified gsi pin. The irqfd is removed using the KVM_IRQFD_FLAG_DEASSIGN flag, specifying both kvm_irqfd.fd and kvm_irqfd.gsi. +With KVM_CAP_IRQFD_RESAMPLE, KVM_IRQFD supports a de-assert and notify +mechanism allowing emulation of level-triggered, irqfd-based +interrupts. When KVM_IRQFD_FLAG_RESAMPLE is set the user must pass an +additional eventfd in the kvm_irqfd.resamplefd field. When operating +in resample mode, posting of an interrupt through kvm_irq.fd asserts +the specified gsi in the irqchip. When the irqchip is resampled, such +as from an EOI, the gsi is de-asserted and the user is notifed via +kvm_irqfd.resamplefd. It is the user's responsibility to re-queue +the interrupt if the device making use of it still requires service. +Note that closing the resamplefd is not sufficient to disable the +irqfd. The KVM_IRQFD_FLAG_RESAMPLE is only necessary on assignment +and need not be specified with KVM_IRQFD_FLAG_DEASSIGN. + 4.76 KVM_PPC_ALLOCATE_HTAB Capability: KVM_CAP_PPC_ALLOC_HTAB diff --git a/Documentation/virtual/kvm/hypercalls.txt b/Documentation/virtual/kvm/hypercalls.txt new file mode 100644 index 0000000000000000000000000000000000000000..ea113b5d87a4a8530fcc32f57a4da78c6e9e7281 --- /dev/null +++ b/Documentation/virtual/kvm/hypercalls.txt @@ -0,0 +1,66 @@ +Linux KVM Hypercall: +=================== +X86: + KVM Hypercalls have a three-byte sequence of either the vmcall or the vmmcall + instruction. The hypervisor can replace it with instructions that are + guaranteed to be supported. + + Up to four arguments may be passed in rbx, rcx, rdx, and rsi respectively. + The hypercall number should be placed in rax and the return value will be + placed in rax. No other registers will be clobbered unless explicitly stated + by the particular hypercall. + +S390: + R2-R7 are used for parameters 1-6. In addition, R1 is used for hypercall + number. The return value is written to R2. + + S390 uses diagnose instruction as hypercall (0x500) along with hypercall + number in R1. + + PowerPC: + It uses R3-R10 and hypercall number in R11. R4-R11 are used as output registers. + Return value is placed in R3. + + KVM hypercalls uses 4 byte opcode, that are patched with 'hypercall-instructions' + property inside the device tree's /hypervisor node. + For more information refer to Documentation/virtual/kvm/ppc-pv.txt + +KVM Hypercalls Documentation +=========================== +The template for each hypercall is: +1. Hypercall name. +2. Architecture(s) +3. Status (deprecated, obsolete, active) +4. Purpose + +1. KVM_HC_VAPIC_POLL_IRQ +------------------------ +Architecture: x86 +Status: active +Purpose: Trigger guest exit so that the host can check for pending +interrupts on reentry. + +2. KVM_HC_MMU_OP +------------------------ +Architecture: x86 +Status: deprecated. +Purpose: Support MMU operations such as writing to PTE, +flushing TLB, release PT. + +3. KVM_HC_FEATURES +------------------------ +Architecture: PPC +Status: active +Purpose: Expose hypercall availability to the guest. On x86 platforms, cpuid +used to enumerate which hypercalls are available. On PPC, either device tree +based lookup ( which is also what EPAPR dictates) OR KVM specific enumeration +mechanism (which is this hypercall) can be used. + +4. KVM_HC_PPC_MAP_MAGIC_PAGE +------------------------ +Architecture: PPC +Status: active +Purpose: To enable communication between the hypervisor and guest there is a +shared page that contains parts of supervisor visible register state. +The guest can map this shared page to access its supervisor register through +memory using this hypercall. diff --git a/Documentation/virtual/kvm/msr.txt b/Documentation/virtual/kvm/msr.txt index 730471048583b9a034a78eb1da4b805373f29c25..6d470ae7b073a2fa13e2f28d741166cbc346e42f 100644 --- a/Documentation/virtual/kvm/msr.txt +++ b/Documentation/virtual/kvm/msr.txt @@ -34,9 +34,12 @@ MSR_KVM_WALL_CLOCK_NEW: 0x4b564d00 time information and check that they are both equal and even. An odd version indicates an in-progress update. - sec: number of seconds for wallclock. + sec: number of seconds for wallclock at time of boot. - nsec: number of nanoseconds for wallclock. + nsec: number of nanoseconds for wallclock at time of boot. + + In order to get the current wallclock time, the system_time from + MSR_KVM_SYSTEM_TIME_NEW needs to be added. Note that although MSRs are per-CPU entities, the effect of this particular MSR is global. @@ -82,20 +85,25 @@ MSR_KVM_SYSTEM_TIME_NEW: 0x4b564d01 time at the time this structure was last updated. Unit is nanoseconds. - tsc_to_system_mul: a function of the tsc frequency. One has - to multiply any tsc-related quantity by this value to get - a value in nanoseconds, besides dividing by 2^tsc_shift + tsc_to_system_mul: multiplier to be used when converting + tsc-related quantity to nanoseconds - tsc_shift: cycle to nanosecond divider, as a power of two, to - allow for shift rights. One has to shift right any tsc-related - quantity by this value to get a value in nanoseconds, besides - multiplying by tsc_to_system_mul. + tsc_shift: shift to be used when converting tsc-related + quantity to nanoseconds. This shift will ensure that + multiplication with tsc_to_system_mul does not overflow. + A positive value denotes a left shift, a negative value + a right shift. - With this information, guests can derive per-CPU time by - doing: + The conversion from tsc to nanoseconds involves an additional + right shift by 32 bits. With this information, guests can + derive per-CPU time by doing: time = (current_tsc - tsc_timestamp) - time = (time * tsc_to_system_mul) >> tsc_shift + if (tsc_shift >= 0) + time <<= tsc_shift; + else + time >>= -tsc_shift; + time = (time * tsc_to_system_mul) >> 32 time = time + system_time flags: bits in this field indicate extended capabilities diff --git a/Documentation/virtual/kvm/ppc-pv.txt b/Documentation/virtual/kvm/ppc-pv.txt index 4911cf95c67e51507118139a7d20897f67fbd888..4cd076febb0239452db01b8e127d6f810081efbb 100644 --- a/Documentation/virtual/kvm/ppc-pv.txt +++ b/Documentation/virtual/kvm/ppc-pv.txt @@ -174,3 +174,25 @@ following: That way we can inject an arbitrary amount of code as replacement for a single instruction. This allows us to check for pending interrupts when setting EE=1 for example. + +Hypercall ABIs in KVM on PowerPC +================================= +1) KVM hypercalls (ePAPR) + +These are ePAPR compliant hypercall implementation (mentioned above). Even +generic hypercalls are implemented here, like the ePAPR idle hcall. These are +available on all targets. + +2) PAPR hypercalls + +PAPR hypercalls are needed to run server PowerPC PAPR guests (-M pseries in QEMU). +These are the same hypercalls that pHyp, the POWER hypervisor implements. Some of +them are handled in the kernel, some are handled in user space. This is only +available on book3s_64. + +3) OSI hypercalls + +Mac-on-Linux is another user of KVM on PowerPC, which has its own hypercall (long +before KVM). This is supported to maintain compatibility. All these hypercalls get +forwarded to user space. This is only useful on book3s_32, but can be used with +book3s_64 as well. diff --git a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt index 77dfecf4e2d6e7ec310b145496f494f9aac25b08..a5f8436753e7d4698bf98d1e3989a14d4a98a923 100644 --- a/Documentation/virtual/uml/UserModeLinux-HOWTO.txt +++ b/Documentation/virtual/uml/UserModeLinux-HOWTO.txt @@ -3591,7 +3591,7 @@ Looking at the source shows that the fault happened during a call to - copy_to_user to copy the data into the kernel: + copy_from_user to copy the data into the kernel: 107 count -= chars; diff --git a/Documentation/vm/unevictable-lru.txt b/Documentation/vm/unevictable-lru.txt index fa206cccf89f8577a8a44ff84d0836b06b712cb5..a68db7692ee8f96e9cf2092510fd1b5be903a497 100644 --- a/Documentation/vm/unevictable-lru.txt +++ b/Documentation/vm/unevictable-lru.txt @@ -197,12 +197,8 @@ the pages are also "rescued" from the unevictable list in the process of freeing them. page_evictable() also checks for mlocked pages by testing an additional page -flag, PG_mlocked (as wrapped by PageMlocked()). If the page is NOT mlocked, -and a non-NULL VMA is supplied, page_evictable() will check whether the VMA is -VM_LOCKED via is_mlocked_vma(). is_mlocked_vma() will SetPageMlocked() and -update the appropriate statistics if the vma is VM_LOCKED. This method allows -efficient "culling" of pages in the fault path that are being faulted in to -VM_LOCKED VMAs. +flag, PG_mlocked (as wrapped by PageMlocked()), which is set when a page is +faulted into a VM_LOCKED vma, or found in a vma being VM_LOCKED. VMSCAN'S HANDLING OF UNEVICTABLE PAGES @@ -371,8 +367,8 @@ mlock_fixup() filters several classes of "special" VMAs: mlock_fixup() will call make_pages_present() in the hugetlbfs VMA range to allocate the huge pages and populate the ptes. -3) VMAs with VM_DONTEXPAND or VM_RESERVED are generally userspace mappings of - kernel pages, such as the VDSO page, relay channel pages, etc. These pages +3) VMAs with VM_DONTEXPAND are generally userspace mappings of kernel pages, + such as the VDSO page, relay channel pages, etc. These pages are inherently unevictable and are not managed on the LRU lists. mlock_fixup() treats these VMAs the same as hugetlbfs VMAs. It calls make_pages_present() to populate the ptes. @@ -651,7 +647,7 @@ PAGE RECLAIM IN shrink_*_list() ------------------------------- shrink_active_list() culls any obviously unevictable pages - i.e. -!page_evictable(page, NULL) - diverting these to the unevictable list. +!page_evictable(page) - diverting these to the unevictable list. However, shrink_active_list() only sees unevictable pages that made it onto the active/inactive lru lists. Note that these pages do not have PageUnevictable set - otherwise they would be on the unevictable list and shrink_active_list diff --git a/MAINTAINERS b/MAINTAINERS index 78336396a432e0a076a9cda21a60cc483c33497e..6d6632f715744d46d9a8e9e74299176d5ccac2e2 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -184,6 +184,16 @@ S: Maintained F: Documentation/filesystems/9p.txt F: fs/9p/ +A8293 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/a8293* + AACRAID SCSI RAID DRIVER M: Adaptec OEM Raid Solutions L: linux-scsi@vger.kernel.org @@ -391,6 +401,26 @@ M: Riccardo Facchetti S: Maintained F: sound/oss/aedsp16.c +AF9013 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/af9013* + +AF9033 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/af9033* + AFFS FILE SYSTEM L: linux-fsdevel@vger.kernel.org S: Orphan @@ -572,7 +602,7 @@ F: drivers/net/appletalk/ F: net/appletalk/ ARASAN COMPACT FLASH PATA CONTROLLER -M: Viresh Kumar +M: Viresh Kumar L: linux-ide@vger.kernel.org S: Maintained F: include/linux/pata_arasan_cf_data.h @@ -760,6 +790,7 @@ S: Maintained T: git git://git.pengutronix.de/git/imx/linux-2.6.git F: arch/arm/mach-imx/ F: arch/arm/plat-mxc/ +F: arch/arm/configs/imx*_defconfig ARM/FREESCALE IMX6 M: Shawn Guo @@ -1062,7 +1093,7 @@ L: linux-media@vger.kernel.org S: Maintained F: arch/arm/plat-s5p/dev-fimc* F: arch/arm/plat-samsung/include/plat/*fimc* -F: drivers/media/video/s5p-fimc/ +F: drivers/media/platform/s5p-fimc/ ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT M: Kyungmin Park @@ -1072,7 +1103,7 @@ L: linux-arm-kernel@lists.infradead.org L: linux-media@vger.kernel.org S: Maintained F: arch/arm/plat-s5p/dev-mfc.c -F: drivers/media/video/s5p-mfc/ +F: drivers/media/platform/s5p-mfc/ ARM/SAMSUNG S5P SERIES TV SUBSYSTEM SUPPORT M: Kyungmin Park @@ -1080,7 +1111,7 @@ M: Tomasz Stanislawski L: linux-arm-kernel@lists.infradead.org L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/video/s5p-tv/ +F: drivers/media/platform/s5p-tv/ ARM/SHMOBILE ARM ARCHITECTURE M: Paul Mundt @@ -1245,7 +1276,7 @@ F: include/linux/i2c/at24.h ATA OVER ETHERNET (AOE) DRIVER M: "Ed L. Cashin" -W: http://www.coraid.com/support/linux +W: http://support.coraid.com/support/linux S: Supported F: Documentation/aoe/ F: drivers/block/aoe/ @@ -1352,7 +1383,7 @@ ATMEL ISI DRIVER M: Josh Wu L: linux-media@vger.kernel.org S: Supported -F: drivers/media/video/atmel-isi.c +F: drivers/media/platform/atmel-isi.c F: include/media/atmel-isi.h ATMEL LCDFB DRIVER @@ -1513,7 +1544,7 @@ S: Supported F: drivers/rtc/rtc-bfin.c BLACKFIN SDH DRIVER -M: Cliff Cai +M: Sonic Zhang L: uclinux-dist-devel@blackfin.uclinux.org W: http://blackfin.uclinux.org S: Supported @@ -1650,7 +1681,6 @@ F: drivers/bcma/ F: include/linux/bcma/ BROCADE BFA FC SCSI DRIVER -M: Jing Huang M: Krishna C Gudipati L: linux-scsi@vger.kernel.org S: Supported @@ -1700,7 +1730,7 @@ W: http://linuxtv.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained F: Documentation/video4linux/bttv/ -F: drivers/media/video/bt8xx/bttv* +F: drivers/media/pci/bt8xx/bttv* C-MEDIA CMI8788 DRIVER M: Clemens Ladisch @@ -1730,7 +1760,7 @@ L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained F: Documentation/video4linux/cafe_ccic -F: drivers/media/video/marvell-ccic/ +F: drivers/media/platform/marvell-ccic/ CAIF NETWORK LAYER M: Sjur Braendeland @@ -1928,10 +1958,10 @@ S: Supported F: drivers/platform/x86/classmate-laptop.c COCCINELLE/Semantic Patches (SmPL) -M: Julia Lawall +M: Julia Lawall M: Gilles Muller -M: Nicolas Palix -L: cocci@diku.dk (moderated for non-subscribers) +M: Nicolas Palix +L: cocci@systeme.lip6.fr (moderated for non-subscribers) W: http://coccinelle.lip6.fr/ S: Supported F: scripts/coccinelle/ @@ -2119,7 +2149,17 @@ W: http://linuxtv.org W: http://www.ivtvdriver.org/index.php/Cx18 S: Maintained F: Documentation/video4linux/cx18.txt -F: drivers/media/video/cx18/ +F: drivers/media/pci/cx18/ + +CXD2820R MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/cxd2820r* CXGB3 ETHERNET DRIVER (CXGB3) M: Divy Le Ray @@ -2383,11 +2423,6 @@ S: Maintained F: Documentation/hwmon/dme1737 F: drivers/hwmon/dme1737.c -DOCBOOK FOR DOCUMENTATION -M: Randy Dunlap -S: Maintained -F: scripts/kernel-doc - DOCKING STATION DRIVER M: Shaohua Li L: linux-acpi@vger.kernel.org @@ -2474,6 +2509,117 @@ L: netdev@vger.kernel.org S: Maintained F: drivers/net/wan/dscc4.c +DVB_USB_AF9015 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/af9015* + +DVB_USB_AF9035 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/af9035* + +DVB_USB_ANYSEE MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/anysee* + +DVB_USB_AU6610 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/au6610* + +DVB_USB_CE6230 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/ce6230* + +DVB_USB_CXUSB MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/cxusb* + +DVB_USB_CYPRESS_FIRMWARE MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/cypress_firmware* + +DVB_USB_EC168 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/ec168* + +DVB_USB_MXL111SF MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/mxl111sf.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/mxl111sf* + +DVB_USB_RTL28XXU MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/rtl28xxu* + +DVB_USB_V2 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/usb/dvb-usb-v2/dvb_usb* +F: drivers/media/usb/dvb-usb-v2/usb_urb.c + DYNAMIC DEBUG M: Jason Baron S: Maintained @@ -2485,6 +2631,16 @@ M: "Maciej W. Rozycki" S: Maintained F: drivers/tty/serial/dz.* +E4000 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/e4000* + EATA-DMA SCSI DRIVER M: Michael Neuffer L: linux-eata@i-connect.net @@ -2513,6 +2669,16 @@ S: Maintained F: include/linux/netfilter_bridge/ebt_*.h F: net/bridge/netfilter/ebt*.c +EC100 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/ec100* + ECRYPT FILE SYSTEM M: Tyler Hicks M: Dustin Kirkland @@ -2632,6 +2798,18 @@ T: git git://git.alsa-project.org/alsa-kernel.git S: Maintained F: sound/usb/misc/ua101.c +EXTENSIBLE FIRMWARE INTERFACE (EFI) +M: Matt Fleming +L: linux-efi@vger.kernel.org +S: Maintained +F: Documentation/x86/efi-stub.txt +F: arch/ia64/kernel/efi.c +F: arch/x86/boot/compressed/eboot.[ch] +F: arch/x86/include/asm/efi.h +F: arch/x86/platform/efi/* +F: drivers/firmware/efivars.c +F: include/linux/efi*.h + EFIFB FRAMEBUFFER DRIVER L: linux-fbdev@vger.kernel.org M: Peter Jones @@ -2783,8 +2961,18 @@ FC0011 TUNER DRIVER M: Michael Buesch L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/common/tuners/fc0011.h -F: drivers/media/common/tuners/fc0011.c +F: drivers/media/tuners/fc0011.h +F: drivers/media/tuners/fc0011.c + +FC2580 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/fc2580* FANOTIFY M: Eric Paris @@ -3014,7 +3202,7 @@ M: Kyungmin Park M: Heungjun Kim L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/video/m5mols/ +F: drivers/media/i2c/m5mols/ F: include/media/m5mols.h FUJITSU TABLET EXTRAS @@ -3112,6 +3300,7 @@ T: git git://git.secretlab.ca/git/linux-2.6.git F: Documentation/gpio.txt F: drivers/gpio/ F: include/linux/gpio* +F: include/asm-generic/gpio.h GRE DEMULTIPLEXER DRIVER M: Dmitry Kozlov @@ -3131,49 +3320,56 @@ M: Frank Zago L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/finepix.c +F: drivers/media/usb/gspca/finepix.c GSPCA GL860 SUBDRIVER M: Olivier Lorin L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/gl860/ +F: drivers/media/usb/gspca/gl860/ GSPCA M5602 SUBDRIVER M: Erik Andren L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/m5602/ +F: drivers/media/usb/gspca/m5602/ GSPCA PAC207 SONIXB SUBDRIVER M: Hans de Goede L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/pac207.c +F: drivers/media/usb/gspca/pac207.c GSPCA SN9C20X SUBDRIVER M: Brian Johnson L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/sn9c20x.c +F: drivers/media/usb/gspca/sn9c20x.c GSPCA T613 SUBDRIVER M: Leandro Costantino L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/t613.c +F: drivers/media/usb/gspca/t613.c GSPCA USB WEBCAM DRIVER M: Hans de Goede L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/gspca/ +F: drivers/media/usb/gspca/ + +STK1160 USB VIDEO CAPTURE DRIVER +M: Ezequiel Garcia +L: linux-media@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git +S: Maintained +F: drivers/media/usb/stk1160/ HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER M: Frank Seidel @@ -3227,6 +3423,16 @@ L: linux-parisc@vger.kernel.org S: Maintained F: sound/parisc/harmony.* +HD29L2 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/hd29l2* + HEWLETT-PACKARD SMART2 RAID DRIVER M: Chirag Kantharia L: iss_storagedev@hp.com @@ -3427,6 +3633,18 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux.git S: Maintained F: arch/ia64/ +IBM Power in-Nest Crypto Acceleration +M: Kent Yoder +L: linux-crypto@vger.kernel.org +S: Supported +F: drivers/crypto/nx/ + +IBM Power 842 compression accelerator +M: Robert Jennings +S: Supported +F: drivers/crypto/nx/nx-842.c +F: include/linux/nx842.h + IBM Power Linux RAID adapter M: Brian King S: Supported @@ -3438,6 +3656,13 @@ L: netdev@vger.kernel.org S: Supported F: drivers/net/ethernet/ibm/ibmveth.* +IBM Power Virtual SCSI/FC Device Drivers +M: Robert Jennings +L: linux-scsi@vger.kernel.org +S: Supported +F: drivers/scsi/ibmvscsi/ +X: drivers/scsi/ibmvscsi/ibmvstgt.c + IBM ServeRAID RAID DRIVER P: Jack Hammer M: Dave Jeffery @@ -3874,7 +4099,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://www.ivtvdriver.org S: Maintained F: Documentation/video4linux/*.ivtv -F: drivers/media/video/ivtv/ +F: drivers/media/pci/ivtv/ F: include/linux/ivtv* JC42.4 TEMPERATURE SENSOR DRIVER @@ -4168,6 +4393,26 @@ W: http://legousb.sourceforge.net/ S: Maintained F: drivers/usb/misc/legousbtower.c +LG2160 MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/dvb-frontends/lg2160.* + +LGDT3305 MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/dvb-frontends/lgdt3305.* + LGUEST M: Rusty Russell L: lguest@lists.ozlabs.org @@ -4570,7 +4815,7 @@ MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER W: http://popies.net/meye/ S: Orphan F: Documentation/video4linux/meye.txt -F: drivers/media/video/meye.* +F: drivers/media/pci/meye/ F: include/linux/meye.h MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER @@ -4634,6 +4879,16 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git S: Maintained F: drivers/usb/musb/ +MXL5007T MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/tuners/mxl5007t.* + MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE) M: Andrew Gallatin L: netdev@vger.kernel.org @@ -4764,6 +5019,20 @@ F: net/ipv6/ F: include/net/ip* F: arch/x86/net/* +NETWORKING [IPSEC] +M: Steffen Klassert +M: Herbert Xu +M: "David S. Miller" +L: netdev@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net.git +S: Maintained +F: net/xfrm/ +F: net/key/ +F: net/ipv4/xfrm* +F: net/ipv6/xfrm* +F: include/uapi/linux/xfrm.h +F: include/net/xfrm.h + NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK) M: Paul Moore L: netdev@vger.kernel.org @@ -4947,8 +5216,10 @@ S: Maintained F: drivers/mmc/host/omap.c OMAP HS MMC SUPPORT +M: Venkatraman S +L: linux-mmc@vger.kernel.org L: linux-omap@vger.kernel.org -S: Orphan +S: Maintained F: drivers/mmc/host/omap_hsmmc.c OMAP RANDOM NUMBER GENERATOR SUPPORT @@ -4974,7 +5245,7 @@ OMAP IMAGE SIGNAL PROCESSOR (ISP) M: Laurent Pinchart L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/video/omap3isp/* +F: drivers/media/platform/omap3isp/ OMAP USB SUPPORT M: Felipe Balbi @@ -5015,7 +5286,7 @@ M: Jonathan Corbet L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: drivers/media/video/ov7670.c +F: drivers/media/i2c/ov7670.c ONENAND FLASH DRIVER M: Kyungmin Park @@ -5049,6 +5320,7 @@ S: Maintained F: Documentation/devicetree F: drivers/of F: include/linux/of*.h +F: scripts/dtc K: of_get_property K: of_match_table @@ -5234,7 +5506,7 @@ F: include/linux/i2c-algo-pca.h F: include/linux/i2c-pca-platform.h PCDP - PRIMARY CONSOLE AND DEBUG PORT -M: Khalid Aziz +M: Khalid Aziz S: Maintained F: drivers/firmware/pcdp.* @@ -5517,13 +5789,25 @@ L: cbe-oss-dev@lists.ozlabs.org S: Maintained F: drivers/block/ps3vram.c +PSTORE FILESYSTEM +M: Anton Vorontsov +M: Colin Cross +M: Kees Cook +M: Tony Luck +S: Maintained +T: git git://git.infradead.org/users/cbou/linux-pstore.git +F: fs/pstore/ +F: include/linux/pstore* +F: drivers/firmware/efivars.c +F: drivers/acpi/apei/erst.c + PTP HARDWARE CLOCK SUPPORT M: Richard Cochran S: Maintained W: http://linuxptp.sourceforge.net/ F: Documentation/ABI/testing/sysfs-ptp F: Documentation/ptp/* -F: drivers/net/gianfar_ptp.c +F: drivers/net/ethernet/freescale/gianfar_ptp.c F: drivers/net/phy/dp83640* F: drivers/ptp/* F: include/linux/ptp_cl* @@ -5546,7 +5830,7 @@ W: http://www.isely.net/pvrusb2/ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained F: Documentation/video4linux/README.pvrusb2 -F: drivers/media/video/pvrusb2/ +F: drivers/media/usb/pvrusb2/ PWM SUBSYSTEM M: Thierry Reding @@ -5656,6 +5940,16 @@ F: fs/qnx4/ F: include/linux/qnx4_fs.h F: include/linux/qnxtypes.h +QT1010 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/qt1010* + QUALCOMM HEXAGON ARCHITECTURE M: Richard Kuo L: linux-hexagon@vger.kernel.org @@ -5822,6 +6116,16 @@ F: include/linux/rose.h F: include/net/rose.h F: net/rose/ +RTL2830 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/rtl2830* + RTL8180 WIRELESS DRIVER M: "John W. Linville" L: linux-wireless@vger.kernel.org @@ -5916,9 +6220,9 @@ L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://www.mihu.de/linux/saa7146 S: Maintained -F: drivers/media/common/saa7146* -F: drivers/media/video/*7146* -F: include/media/*7146* +F: drivers/media/common/saa7146/ +F: drivers/media/pci/saa7146/ +F: include/media/saa7146* SAMSUNG LAPTOP DRIVER M: Corentin Chary @@ -5955,7 +6259,7 @@ S: Maintained F: drivers/tty/serial SYNOPSYS DESIGNWARE DMAC DRIVER -M: Viresh Kumar +M: Viresh Kumar S: Maintained F: include/linux/dw_dmac.h F: drivers/dma/dw_dmac_regs.h @@ -5979,7 +6283,7 @@ M: Huang Shijie M: Kang Yong M: Zhang Xiaobing S: Supported -F: drivers/media/video/tlg2300 +F: drivers/media/usb/tlg2300 SC1200 WDT DRIVER M: Zwane Mwaikambo @@ -6103,7 +6407,7 @@ S: Maintained F: drivers/mmc/host/sdhci-s3c.c SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER -M: Viresh Kumar +M: Viresh Kumar L: spear-devel@list.st.com L: linux-mmc@vger.kernel.org S: Maintained @@ -6367,8 +6671,9 @@ M: Guennadi Liakhovetski L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git S: Maintained -F: include/media/v4l2* -F: drivers/media/video/v4l2* +F: include/media/soc* +F: drivers/media/i2c/soc_camera/ +F: drivers/media/platform/soc_camera/ SOEKRIS NET48XX LED SUPPORT M: Chris Boot @@ -6468,7 +6773,7 @@ S: Maintained F: include/linux/compiler.h SPEAR PLATFORM SUPPORT -M: Viresh Kumar +M: Viresh Kumar M: Shiraz Hashim L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -6477,7 +6782,7 @@ S: Maintained F: arch/arm/plat-spear/ SPEAR13XX MACHINE SUPPORT -M: Viresh Kumar +M: Viresh Kumar M: Shiraz Hashim L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -6486,7 +6791,7 @@ S: Maintained F: arch/arm/mach-spear13xx/ SPEAR3XX MACHINE SUPPORT -M: Viresh Kumar +M: Viresh Kumar M: Shiraz Hashim L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) @@ -6497,7 +6802,7 @@ F: arch/arm/mach-spear3xx/ SPEAR6XX MACHINE SUPPORT M: Rajeev Kumar M: Shiraz Hashim -M: Viresh Kumar +M: Viresh Kumar L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear @@ -6505,7 +6810,7 @@ S: Maintained F: arch/arm/mach-spear6xx/ SPEAR CLOCK FRAMEWORK SUPPORT -M: Viresh Kumar +M: Viresh Kumar L: spear-devel@list.st.com L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://www.st.com/spear @@ -6745,6 +7050,14 @@ S: Maintained F: Documentation/svga.txt F: arch/x86/boot/video* +SWIOTLB SUBSYSTEM +M: Konrad Rzeszutek Wilk +L: linux-kernel@vger.kernel.org +S: Supported +F: lib/swiotlb.c +F: arch/*/kernel/pci-swiotlb.c +F: include/linux/swiotlb.h + SYSV FILESYSTEM M: Christoph Hellwig S: Maintained @@ -6786,6 +7099,66 @@ W: http://tcp-lp-mod.sourceforge.net/ S: Maintained F: net/ipv4/tcp_lp.c +TDA10071 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/dvb-frontends/tda10071* + +TDA18212 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/tda18212* + +TDA18218 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/tda18218* + +TDA18271 MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/tuners/tda18271* + +TDA827x MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/tuners/tda8290.* + +TDA8290 MEDIA DRIVER +M: Michael Krufky +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://github.com/mkrufky +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/mkrufky/tuners.git +S: Maintained +F: drivers/media/tuners/tda8290.* + TEAM DRIVER M: Jiri Pirko L: netdev@vger.kernel.org @@ -6816,6 +7189,8 @@ F: drivers/char/tlclk.c TENSILICA XTENSA PORT (xtensa) M: Chris Zankel +M: Max Filippov +L: linux-xtensa@linux-xtensa.org S: Maintained F: arch/xtensa/ @@ -6976,6 +7351,16 @@ F: include/linux/serial_core.h F: include/linux/serial.h F: include/linux/tty.h +TUA9001 MEDIA DRIVER +M: Antti Palosaari +L: linux-media@vger.kernel.org +W: http://linuxtv.org/ +W: http://palosaari.fi/linux/ +Q: http://patchwork.linuxtv.org/project/linux-media/list/ +T: git git://linuxtv.org/anttip/media_tree.git +S: Maintained +F: drivers/media/tuners/tua9001* + TULIP NETWORK DRIVERS M: Grant Grundler L: netdev@vger.kernel.org @@ -7093,6 +7478,12 @@ F: drivers/mtd/ubi/ F: include/linux/mtd/ubi.h F: include/mtd/ubi-user.h +UNSORTED BLOCK IMAGES (UBI) Fastmap +M: Richard Weinberger +L: linux-mtd@lists.infradead.org +S: Maintained +F: drivers/mtd/ubi/fastmap.c + USB ACM DRIVER M: Oliver Neukum L: linux-usb@vger.kernel.org @@ -7148,15 +7539,6 @@ S: Maintained F: Documentation/usb/ehci.txt F: drivers/usb/host/ehci* -USB ET61X[12]51 DRIVER -M: Luca Risolia -L: linux-usb@vger.kernel.org -L: linux-media@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git -W: http://www.linux-projects.org -S: Maintained -F: drivers/media/video/et61x251/ - USB GADGET/PERIPHERAL SUBSYSTEM M: Felipe Balbi L: linux-usb@vger.kernel.org @@ -7326,7 +7708,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://www.linux-projects.org S: Maintained F: Documentation/video4linux/sn9c102.txt -F: drivers/media/video/sn9c102/ +F: drivers/media/usb/sn9c102/ USB SUBSYSTEM M: Greg Kroah-Hartman @@ -7361,17 +7743,7 @@ L: linux-media@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://www.ideasonboard.org/uvc/ S: Maintained -F: drivers/media/video/uvc/ - -USB W996[87]CF DRIVER -M: Luca Risolia -L: linux-usb@vger.kernel.org -L: linux-media@vger.kernel.org -T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git -W: http://www.linux-projects.org -S: Maintained -F: Documentation/video4linux/w9968cf.txt -F: drivers/media/video/w996* +F: drivers/media/usb/uvc/ USB WIRELESS RNDIS DRIVER (rndis_wlan) M: Jussi Kivilinna @@ -7400,7 +7772,7 @@ T: git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media.git W: http://royale.zerezo.com/zr364xx/ S: Maintained F: Documentation/video4linux/zr364xx.txt -F: drivers/media/video/zr364xx.c +F: drivers/media/usb/zr364xx/ USER-MODE LINUX (UML) M: Jeff Dike @@ -7458,7 +7830,7 @@ M: Marek Szyprowski M: Kyungmin Park L: linux-media@vger.kernel.org S: Maintained -F: drivers/media/video/videobuf2-* +F: drivers/media/v4l2-core/videobuf2-* F: include/media/videobuf2-* VIRTIO CONSOLE DRIVER @@ -7770,6 +8142,13 @@ F: drivers/xen/ F: arch/x86/include/asm/xen/ F: include/xen/ +XEN HYPERVISOR ARM +M: Stefano Stabellini +L: xen-devel@lists.xensource.com (moderated for non-subscribers) +S: Supported +F: arch/arm/xen/ +F: arch/arm/include/asm/xen/ + XEN NETWORK BACKEND DRIVER M: Ian Campbell L: xen-devel@lists.xensource.com (moderated for non-subscribers) @@ -7860,7 +8239,7 @@ L: linux-media@vger.kernel.org W: http://mjpeg.sourceforge.net/driver-zoran/ T: Mercurial http://linuxtv.org/hg/v4l-dvb S: Odd Fixes -F: drivers/media/video/zoran/ +F: drivers/media/pci/zoran/ ZS DECSTATION Z85C30 SERIAL DRIVER M: "Maciej W. Rozycki" diff --git a/Makefile b/Makefile index 846dd7607854f3ad1a63eb2af2ebd42faf92e9b9..5be2ee8c90e4247b90ec1aed9421492226d5f7f8 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 -PATCHLEVEL = 6 +PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = +EXTRAVERSION = -rc1 NAME = Terrified Chipmunk # *DOCUMENTATION* @@ -350,12 +350,22 @@ AFLAGS_KERNEL = CFLAGS_GCOV = -fprofile-arcs -ftest-coverage +# Use USERINCLUDE when you must reference the UAPI directories only. +USERINCLUDE := \ + -I$(srctree)/arch/$(hdr-arch)/include/uapi \ + -Iarch/$(hdr-arch)/include/generated/uapi \ + -I$(srctree)/include/uapi \ + -Iinclude/generated/uapi \ + -include $(srctree)/include/linux/kconfig.h + # Use LINUXINCLUDE when you must reference the include/ directory. # Needed to be compatible with the O= option -LINUXINCLUDE := -I$(srctree)/arch/$(hdr-arch)/include \ - -Iarch/$(hdr-arch)/include/generated -Iinclude \ - $(if $(KBUILD_SRC), -I$(srctree)/include) \ - -include $(srctree)/include/linux/kconfig.h +LINUXINCLUDE := \ + -I$(srctree)/arch/$(hdr-arch)/include \ + -Iarch/$(hdr-arch)/include/generated \ + $(if $(KBUILD_SRC), -I$(srctree)/include) \ + -Iinclude \ + $(USERINCLUDE) KBUILD_CPPFLAGS := -D__KERNEL__ @@ -437,9 +447,11 @@ asm-generic: # Detect when mixed targets is specified, and make a second invocation # of make so .config is not included in this case either (for *config). +version_h := include/generated/uapi/linux/version.h + no-dot-config-targets := clean mrproper distclean \ cscope gtags TAGS tags help %docs check% coccicheck \ - include/linux/version.h headers_% archheaders archscripts \ + $(version_h) headers_% archheaders archscripts \ kernelversion %src-pkg config-targets := 0 @@ -652,22 +664,9 @@ ifeq ($(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-goto.sh $(CC)), y) endif # Add user supplied CPPFLAGS, AFLAGS and CFLAGS as the last assignments -# But warn user when we do so -warn-assign = \ -$(warning "WARNING: Appending $$K$(1) ($(K$(1))) from $(origin K$(1)) to kernel $$$(1)") - -ifneq ($(KCPPFLAGS),) - $(call warn-assign,CPPFLAGS) - KBUILD_CPPFLAGS += $(KCPPFLAGS) -endif -ifneq ($(KAFLAGS),) - $(call warn-assign,AFLAGS) - KBUILD_AFLAGS += $(KAFLAGS) -endif -ifneq ($(KCFLAGS),) - $(call warn-assign,CFLAGS) - KBUILD_CFLAGS += $(KCFLAGS) -endif +KBUILD_CPPFLAGS += $(KCPPFLAGS) +KBUILD_AFLAGS += $(KAFLAGS) +KBUILD_CFLAGS += $(KCFLAGS) # Use --build-id when available. LDFLAGS_BUILD_ID = $(patsubst -Wl$(comma)%,%,\ @@ -809,7 +808,7 @@ endif # prepare2 creates a makefile if using a separate output directory prepare2: prepare3 outputmakefile asm-generic -prepare1: prepare2 include/linux/version.h include/generated/utsrelease.h \ +prepare1: prepare2 $(version_h) include/generated/utsrelease.h \ include/config/auto.conf $(cmd_crmodverdir) @@ -842,7 +841,7 @@ define filechk_version.h echo '#define KERNEL_VERSION(a,b,c) (((a) << 16) + ((b) << 8) + (c))';) endef -include/linux/version.h: $(srctree)/Makefile FORCE +$(version_h): $(srctree)/Makefile FORCE $(call filechk,version.h) include/generated/utsrelease.h: include/config/kernel.release FORCE @@ -887,7 +886,7 @@ PHONY += archscripts archscripts: PHONY += __headers -__headers: include/linux/version.h scripts_basic asm-generic archheaders archscripts FORCE +__headers: $(version_h) scripts_basic asm-generic archheaders archscripts FORCE $(Q)$(MAKE) $(build)=scripts build_unifdef PHONY += headers_install_all @@ -896,10 +895,10 @@ headers_install_all: PHONY += headers_install headers_install: __headers - $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/asm/Kbuild),, \ - $(error Headers not exportable for the $(SRCARCH) architecture)) - $(Q)$(MAKE) $(hdr-inst)=include - $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) + $(if $(wildcard $(srctree)/arch/$(hdr-arch)/include/uapi/asm/Kbuild),, \ + $(error Headers not exportable for the $(SRCARCH) architecture)) + $(Q)$(MAKE) $(hdr-inst)=include/uapi + $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) PHONY += headers_check_all headers_check_all: headers_install_all @@ -907,8 +906,8 @@ headers_check_all: headers_install_all PHONY += headers_check headers_check: headers_install - $(Q)$(MAKE) $(hdr-inst)=include HDRCHECK=1 - $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/asm $(hdr-dst) HDRCHECK=1 + $(Q)$(MAKE) $(hdr-inst)=include/uapi HDRCHECK=1 + $(Q)$(MAKE) $(hdr-inst)=arch/$(hdr-arch)/include/uapi/asm $(hdr-dst) HDRCHECK=1 # --------------------------------------------------------------------------- # Modules @@ -997,9 +996,11 @@ CLEAN_DIRS += $(MODVERDIR) # Directories & files removed with 'make mrproper' MRPROPER_DIRS += include/config usr/include include/generated \ arch/*/include/generated -MRPROPER_FILES += .config .config.old .version .old_version \ - include/linux/version.h \ - Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS +MRPROPER_FILES += .config .config.old .version .old_version $(version_h) \ + Module.symvers tags TAGS cscope* GPATH GTAGS GRTAGS GSYMS \ + signing_key.priv signing_key.x509 x509.genkey \ + extra_certificates signing_key.x509.keyid \ + signing_key.x509.signer # clean - Delete most, but leave enough to build external modules # @@ -1243,6 +1244,7 @@ clean: $(clean-dirs) $(call cmd,rmfiles) @find $(if $(KBUILD_EXTMOD), $(KBUILD_EXTMOD), .) $(RCS_FIND_IGNORE) \ \( -name '*.[oas]' -o -name '*.ko' -o -name '.*.cmd' \ + -o -name '*.ko.*' \ -o -name '.*.d' -o -name '.*.tmp' -o -name '*.mod.c' \ -o -name '*.symtypes' -o -name 'modules.order' \ -o -name modules.builtin -o -name '.tmp_*.o.*' \ diff --git a/README b/README index 9beaed0ed620b31495a89c79fd12f7f926f7d902..f32710a817fc392262f5f890cb637e5e0b1b5d1a 100644 --- a/README +++ b/README @@ -206,6 +206,24 @@ CONFIGURING the kernel: "make randconfig" Create a ./.config file by setting symbol values to random values. + "make localmodconfig" Create a config based on current config and + loaded modules (lsmod). Disables any module + option that is not needed for the loaded modules. + + To create a localmodconfig for another machine, + store the lsmod of that machine into a file + and pass it in as a LSMOD parameter. + + target$ lsmod > /tmp/mylsmod + target$ scp /tmp/mylsmod host:/tmp + + host$ make LSMOD=/tmp/mylsmod localmodconfig + + The above also works when cross compiling. + + "make localyesconfig" Similar to localmodconfig, except it will convert + all module options to built in (=y) options. + You can find more information on using the Linux kernel config tools in Documentation/kbuild/kconfig.txt. diff --git a/arch/Kconfig b/arch/Kconfig index a62965d057f6d8b5a94baf8bf14ecc11ecef5491..366ec06a5185f0a59a7e5069357dbdb3da5a08c8 100644 --- a/arch/Kconfig +++ b/arch/Kconfig @@ -271,6 +271,12 @@ config ARCH_WANT_OLD_COMPAT_IPC select ARCH_WANT_COMPAT_IPC_PARSE_VERSION bool +config GENERIC_KERNEL_THREAD + bool + +config GENERIC_KERNEL_EXECVE + bool + config HAVE_ARCH_SECCOMP_FILTER bool help @@ -313,4 +319,26 @@ config HAVE_IRQ_TIME_ACCOUNTING Archs need to ensure they use a high enough resolution clock to support irq time accounting and then call enable_sched_clock_irqtime(). +config HAVE_ARCH_TRANSPARENT_HUGEPAGE + bool + +config HAVE_MOD_ARCH_SPECIFIC + bool + help + The arch uses struct mod_arch_specific to store data. Many arches + just need a simple module loader without arch specific data - those + should not enable this. + +config MODULES_USE_ELF_RELA + bool + help + Modules only use ELF RELA relocations. Modules with ELF REL + relocations will give an error. + +config MODULES_USE_ELF_REL + bool + help + Modules only use ELF REL relocations. Modules with ELF RELA + relocations will give an error. + source "kernel/gcov/Kconfig" diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 9944dedee5b1b1b31abf08599a44421333bd9290..5dd7f5db24d45e6d98961ae53cc4478224068d8b 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -20,6 +20,10 @@ config ALPHA select GENERIC_CMOS_UPDATE select GENERIC_STRNCPY_FROM_USER select GENERIC_STRNLEN_USER + select GENERIC_KERNEL_THREAD + select GENERIC_KERNEL_EXECVE + select HAVE_MOD_ARCH_SPECIFIC + select MODULES_USE_ELF_RELA help The Alpha is a 64-bit general-purpose processor designed and marketed by the Digital Equipment Corporation of blessed memory, diff --git a/arch/alpha/include/asm/Kbuild b/arch/alpha/include/asm/Kbuild index e423defed91e30cb68bf51863fe105caffe7f016..64ffc9e9e5485a41b29e0836773389582dfac2fe 100644 --- a/arch/alpha/include/asm/Kbuild +++ b/arch/alpha/include/asm/Kbuild @@ -1,5 +1,7 @@ include include/asm-generic/Kbuild.asm +generic-y += clkdev.h + header-y += compiler.h header-y += console.h header-y += fpu.h @@ -8,3 +10,4 @@ header-y += pal.h header-y += reg.h header-y += regdef.h header-y += sysinfo.h +generic-y += exec.h diff --git a/arch/alpha/include/asm/exec.h b/arch/alpha/include/asm/exec.h deleted file mode 100644 index 4a5a41f30779490cf070f1ccf6e9fa1e5bfb306f..0000000000000000000000000000000000000000 --- a/arch/alpha/include/asm/exec.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ALPHA_EXEC_H -#define __ALPHA_EXEC_H - -#define arch_align_stack(x) (x) - -#endif /* __ALPHA_EXEC_H */ diff --git a/arch/alpha/include/asm/module.h b/arch/alpha/include/asm/module.h index 7b63743c534a10c34a022c92c144558e425a38d9..9cd13b55155f2f4083f44a8fcec3a79b935570c9 100644 --- a/arch/alpha/include/asm/module.h +++ b/arch/alpha/include/asm/module.h @@ -1,19 +1,13 @@ #ifndef _ALPHA_MODULE_H #define _ALPHA_MODULE_H +#include + struct mod_arch_specific { unsigned int gotsecindex; }; -#define Elf_Sym Elf64_Sym -#define Elf_Shdr Elf64_Shdr -#define Elf_Ehdr Elf64_Ehdr -#define Elf_Phdr Elf64_Phdr -#define Elf_Dyn Elf64_Dyn -#define Elf_Rel Elf64_Rel -#define Elf_Rela Elf64_Rela - #define ARCH_SHF_SMALL SHF_ALPHA_GPREL #ifdef MODULE diff --git a/arch/alpha/include/asm/processor.h b/arch/alpha/include/asm/processor.h index e37b887b3d9f636fdcb0b4615a8c648dfc3d364f..6cb7fe85c4b567adad3516a74c5b862a32a50a5e 100644 --- a/arch/alpha/include/asm/processor.h +++ b/arch/alpha/include/asm/processor.h @@ -49,9 +49,6 @@ extern void start_thread(struct pt_regs *, unsigned long, unsigned long); /* Free all resources held by a thread. */ extern void release_thread(struct task_struct *); -/* Create a kernel thread without removing it from tasklists. */ -extern long kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - unsigned long get_wchan(struct task_struct *p); #define KSTK_EIP(tsk) (task_pt_regs(tsk)->pc) diff --git a/arch/alpha/include/asm/thread_info.h b/arch/alpha/include/asm/thread_info.h index 28335bd40e406d54557fc17d7dbc15eae88d1a8d..4554ecbff7c6527be35fea7d20e255cc0770b653 100644 --- a/arch/alpha/include/asm/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h @@ -84,7 +84,6 @@ register struct thread_info *__current_thread_info __asm__("$8"); #define _TIF_SIGPENDING (1< non-restartable */ + cmovne $26, 0, $18 /* $18 = 0 => non-restartable */ ldq $0, SP_OFF($sp) and $0, 8, $0 beq $0, ret_to_kernel @@ -320,8 +320,8 @@ ret_to_user: sampling and the rti. */ lda $16, 7 call_pal PAL_swpipl - ldl $5, TI_FLAGS($8) - and $5, _TIF_WORK_MASK, $2 + ldl $17, TI_FLAGS($8) + and $17, _TIF_WORK_MASK, $2 bne $2, work_pending restore_all: RESTORE_ALL @@ -341,10 +341,10 @@ $syscall_error: * frame to indicate that a negative return value wasn't an * error number.. */ - ldq $19, 0($sp) /* old syscall nr (zero if success) */ - beq $19, $ret_success + ldq $18, 0($sp) /* old syscall nr (zero if success) */ + beq $18, $ret_success - ldq $20, 72($sp) /* .. and this a3 */ + ldq $19, 72($sp) /* .. and this a3 */ subq $31, $0, $0 /* with error in v0 */ addq $31, 1, $1 /* set a3 for errno return */ stq $0, 0($sp) @@ -362,51 +362,35 @@ $ret_success: * Do all cleanup when returning from all interrupts and system calls. * * Arguments: - * $5: TI_FLAGS. * $8: current. - * $19: The old syscall number, or zero if this is not a return + * $17: TI_FLAGS. + * $18: The old syscall number, or zero if this is not a return * from a syscall that errored and is possibly restartable. - * $20: The old a3 value + * $19: The old a3 value */ .align 4 .ent work_pending work_pending: - and $5, _TIF_NEED_RESCHED, $2 - beq $2, $work_notifysig + and $17, _TIF_NOTIFY_RESUME | _TIF_SIGPENDING, $2 + bne $2, $work_notifysig $work_resched: - subq $sp, 16, $sp - stq $19, 0($sp) /* save syscall nr */ - stq $20, 8($sp) /* and error indication (a3) */ + /* + * We can get here only if we returned from syscall without SIGPENDING + * or got through work_notifysig already. Either case means no syscall + * restarts for us, so let $18 and $19 burn. + */ jsr $26, schedule - ldq $19, 0($sp) - ldq $20, 8($sp) - addq $sp, 16, $sp - /* Make sure need_resched and sigpending don't change between - sampling and the rti. */ - lda $16, 7 - call_pal PAL_swpipl - ldl $5, TI_FLAGS($8) - and $5, _TIF_WORK_MASK, $2 - beq $2, restore_all - and $5, _TIF_NEED_RESCHED, $2 - bne $2, $work_resched + mov 0, $18 + br ret_to_user $work_notifysig: mov $sp, $16 bsr $1, do_switch_stack - mov $sp, $17 - mov $5, $18 - mov $19, $9 /* save old syscall number */ - mov $20, $10 /* save old a3 */ - and $5, _TIF_SIGPENDING, $2 - cmovne $2, 0, $9 /* we don't want double syscall restarts */ - jsr $26, do_notify_resume - mov $9, $19 - mov $10, $20 + jsr $26, do_work_pending bsr $1, undo_switch_stack - br ret_to_user + br restore_all .end work_pending /* @@ -418,11 +402,10 @@ $work_notifysig: strace: /* set up signal stack, call syscall_trace */ bsr $1, do_switch_stack - jsr $26, syscall_trace + jsr $26, syscall_trace_enter /* returns the syscall number */ bsr $1, undo_switch_stack - /* get the system call number and the arguments back.. */ - ldq $0, 0($sp) + /* get the arguments back.. */ ldq $16, SP_OFF+24($sp) ldq $17, SP_OFF+32($sp) ldq $18, SP_OFF+40($sp) @@ -449,15 +432,15 @@ $strace_success: stq $0, 0($sp) /* save return value */ bsr $1, do_switch_stack - jsr $26, syscall_trace + jsr $26, syscall_trace_leave bsr $1, undo_switch_stack br $31, ret_from_sys_call .align 3 $strace_error: - ldq $19, 0($sp) /* old syscall nr (zero if success) */ - beq $19, $strace_success - ldq $20, 72($sp) /* .. and this a3 */ + ldq $18, 0($sp) /* old syscall nr (zero if success) */ + beq $18, $strace_success + ldq $19, 72($sp) /* .. and this a3 */ subq $31, $0, $0 /* with error in v0 */ addq $31, 1, $1 /* set a3 for errno return */ @@ -465,11 +448,11 @@ $strace_error: stq $1, 72($sp) /* a3 for return */ bsr $1, do_switch_stack - mov $19, $9 /* save old syscall number */ - mov $20, $10 /* save old a3 */ - jsr $26, syscall_trace - mov $9, $19 - mov $10, $20 + mov $18, $9 /* save old syscall number */ + mov $19, $10 /* save old a3 */ + jsr $26, syscall_trace_leave + mov $9, $18 + mov $10, $19 bsr $1, undo_switch_stack mov $31, $26 /* tell "ret_from_sys_call" we can restart */ @@ -609,59 +592,20 @@ ret_from_fork: .end ret_from_fork /* - * kernel_thread(fn, arg, clone_flags) + * ... and new kernel threads - here */ .align 4 - .globl kernel_thread - .ent kernel_thread -kernel_thread: - /* We can be called from a module. */ - ldgp $gp, 0($27) - .prologue 1 - subq $sp, SP_OFF+6*8, $sp - br $1, 2f /* load start address */ - - /* We've now "returned" from a fake system call. */ - unop - blt $0, 1f /* error? */ - ldi $1, 0x3fff - beq $20, 1f /* parent or child? */ - - bic $sp, $1, $8 /* in child. */ - jsr $26, ($27) - ldgp $gp, 0($26) - mov $0, $16 - mov $31, $26 - jmp $31, sys_exit - -1: ret /* in parent. */ - - .align 4 -2: /* Fake a system call stack frame, as we can't do system calls - from kernel space. Note that we store FN and ARG as they - need to be set up in the child for the call. Also store $8 - and $26 for use in the parent. */ - stq $31, SP_OFF($sp) /* ps */ - stq $1, SP_OFF+8($sp) /* pc */ - stq $gp, SP_OFF+16($sp) /* gp */ - stq $16, 136($sp) /* $27; FN for child */ - stq $17, SP_OFF+24($sp) /* $16; ARG for child */ - stq $8, 64($sp) /* $8 */ - stq $26, 128($sp) /* $26 */ - /* Avoid the HAE being gratuitously wrong, to avoid restoring it. */ - ldq $2, alpha_mv+HAE_CACHE - stq $2, 152($sp) /* HAE */ - - /* Shuffle FLAGS to the front; add CLONE_VM. */ - ldi $1, CLONE_VM|CLONE_UNTRACED - or $18, $1, $16 - bsr $26, sys_clone - - /* We don't actually care for a3 success widgetry in the kernel. - Not for positive errno values. */ - stq $0, 0($sp) /* $0 */ - br ret_to_kernel -.end kernel_thread + .globl ret_from_kernel_thread + .ent ret_from_kernel_thread +ret_from_kernel_thread: + mov $17, $16 + jsr $26, schedule_tail + mov $9, $27 + mov $10, $16 + jsr $26, ($9) + mov $31, $19 /* to disable syscall restarts */ + br $31, ret_to_user +.end ret_from_kernel_thread /* @@ -722,7 +666,7 @@ sys_sigreturn: lda $sp, -SWITCH_STACK_SIZE($sp) jsr $26, do_sigreturn bne $9, 1f - jsr $26, syscall_trace + jsr $26, syscall_trace_leave 1: br $1, undo_switch_stack br ret_from_sys_call .end sys_sigreturn @@ -739,20 +683,11 @@ sys_rt_sigreturn: lda $sp, -SWITCH_STACK_SIZE($sp) jsr $26, do_rt_sigreturn bne $9, 1f - jsr $26, syscall_trace + jsr $26, syscall_trace_leave 1: br $1, undo_switch_stack br ret_from_sys_call .end sys_rt_sigreturn - .align 4 - .globl sys_execve - .ent sys_execve -sys_execve: - .prologue 0 - mov $sp, $19 - jmp $31, do_sys_execve -.end sys_execve - .align 4 .globl alpha_ni_syscall .ent alpha_ni_syscall diff --git a/arch/alpha/kernel/osf_sys.c b/arch/alpha/kernel/osf_sys.c index 9503a4be40f6887ef883963445d7cd01a3cd4f2c..9eb090582cf1eb2c557e03025bafc73846fde02f 100644 --- a/arch/alpha/kernel/osf_sys.c +++ b/arch/alpha/kernel/osf_sys.c @@ -145,27 +145,24 @@ SYSCALL_DEFINE4(osf_getdirentries, unsigned int, fd, long __user *, basep) { int error; - struct file *file; + struct fd arg = fdget(fd); struct osf_dirent_callback buf; - error = -EBADF; - file = fget(fd); - if (!file) - goto out; + if (!arg.file) + return -EBADF; buf.dirent = dirent; buf.basep = basep; buf.count = count; buf.error = 0; - error = vfs_readdir(file, osf_filldir, &buf); + error = vfs_readdir(arg.file, osf_filldir, &buf); if (error >= 0) error = buf.error; if (count != buf.count) error = count - buf.count; - fput(file); - out: + fdput(arg); return error; } @@ -452,7 +449,7 @@ osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags) { int retval; struct cdfs_args tmp; - char *devname; + struct filename *devname; retval = -EFAULT; if (copy_from_user(&tmp, args, sizeof(tmp))) @@ -461,7 +458,7 @@ osf_ufs_mount(char *dirname, struct ufs_args __user *args, int flags) retval = PTR_ERR(devname); if (IS_ERR(devname)) goto out; - retval = do_mount(devname, dirname, "ext2", flags, NULL); + retval = do_mount(devname->name, dirname, "ext2", flags, NULL); putname(devname); out: return retval; @@ -472,7 +469,7 @@ osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags) { int retval; struct cdfs_args tmp; - char *devname; + struct filename *devname; retval = -EFAULT; if (copy_from_user(&tmp, args, sizeof(tmp))) @@ -481,7 +478,7 @@ osf_cdfs_mount(char *dirname, struct cdfs_args __user *args, int flags) retval = PTR_ERR(devname); if (IS_ERR(devname)) goto out; - retval = do_mount(devname, dirname, "iso9660", flags, NULL); + retval = do_mount(devname->name, dirname, "iso9660", flags, NULL); putname(devname); out: return retval; @@ -502,7 +499,7 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, const char __user *, path, int, flag, void __user *, data) { int retval; - char *name; + struct filename *name; name = getname(path); retval = PTR_ERR(name); @@ -510,13 +507,13 @@ SYSCALL_DEFINE4(osf_mount, unsigned long, typenr, const char __user *, path, goto out; switch (typenr) { case 1: - retval = osf_ufs_mount(name, data, flag); + retval = osf_ufs_mount(name->name, data, flag); break; case 6: - retval = osf_cdfs_mount(name, data, flag); + retval = osf_cdfs_mount(name->name, data, flag); break; case 9: - retval = osf_procfs_mount(name, data, flag); + retval = osf_procfs_mount(name->name, data, flag); break; default: retval = -EINVAL; diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c index 53649c7d0068f19e4b66b7cf8a6012ad5519f7b3..b51f7b4818cd07117308d645abfae4a91eeb0aa3 100644 --- a/arch/alpha/kernel/pci-sysfs.c +++ b/arch/alpha/kernel/pci-sysfs.c @@ -26,7 +26,7 @@ static int hose_mmap_page_range(struct pci_controller *hose, base = sparse ? hose->sparse_io_base : hose->dense_io_base; vma->vm_pgoff += base >> PAGE_SHIFT; - vma->vm_flags |= (VM_IO | VM_RESERVED); + vma->vm_flags |= VM_IO | VM_DONTEXPAND | VM_DONTDUMP; return io_remap_pfn_range(vma, vma->vm_start, vma->vm_pgoff, vma->vm_end - vma->vm_start, diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c index 83638aa096d562d803a8ffb3632dbb971db6da3d..4054e0ffe2b25a1055deb3946167755dc73fb201 100644 --- a/arch/alpha/kernel/process.c +++ b/arch/alpha/kernel/process.c @@ -263,33 +263,35 @@ alpha_vfork(struct pt_regs *regs) /* * Copy an alpha thread.. - * - * Note the "stack_offset" stuff: when returning to kernel mode, we need - * to have some extra stack-space for the kernel stack that still exists - * after the "ret_from_fork". When returning to user mode, we only want - * the space needed by the syscall stack frame (ie "struct pt_regs"). - * Use the passed "regs" pointer to determine how much space we need - * for a kernel fork(). */ int copy_thread(unsigned long clone_flags, unsigned long usp, - unsigned long unused, + unsigned long arg, struct task_struct * p, struct pt_regs * regs) { extern void ret_from_fork(void); + extern void ret_from_kernel_thread(void); struct thread_info *childti = task_thread_info(p); - struct pt_regs * childregs; - struct switch_stack * childstack, *stack; - unsigned long stack_offset, settls; - - stack_offset = PAGE_SIZE - sizeof(struct pt_regs); - if (!(regs->ps & 8)) - stack_offset = (PAGE_SIZE-1) & (unsigned long) regs; - childregs = (struct pt_regs *) - (stack_offset + PAGE_SIZE + task_stack_page(p)); - + struct pt_regs *childregs = task_pt_regs(p); + struct switch_stack *childstack, *stack; + unsigned long settls; + + childstack = ((struct switch_stack *) childregs) - 1; + if (unlikely(!regs)) { + /* kernel thread */ + memset(childstack, 0, + sizeof(struct switch_stack) + sizeof(struct pt_regs)); + childstack->r26 = (unsigned long) ret_from_kernel_thread; + childstack->r9 = usp; /* function */ + childstack->r10 = arg; + childregs->hae = alpha_mv.hae_cache, + childti->pcb.usp = 0; + childti->pcb.ksp = (unsigned long) childstack; + childti->pcb.flags = 1; /* set FEN, clear everything else */ + return 0; + } *childregs = *regs; settls = regs->r20; childregs->r0 = 0; @@ -297,7 +299,6 @@ copy_thread(unsigned long clone_flags, unsigned long usp, childregs->r20 = 1; /* OSF/1 has some strange fork() semantics. */ regs->r20 = 0; stack = ((struct switch_stack *) regs) - 1; - childstack = ((struct switch_stack *) childregs) - 1; *childstack = *stack; childstack->r26 = (unsigned long) ret_from_fork; childti->pcb.usp = usp; @@ -385,27 +386,6 @@ dump_elf_task_fp(elf_fpreg_t *dest, struct task_struct *task) } EXPORT_SYMBOL(dump_elf_task_fp); -/* - * sys_execve() executes a new program. - */ -asmlinkage int -do_sys_execve(const char __user *ufilename, - const char __user *const __user *argv, - const char __user *const __user *envp, struct pt_regs *regs) -{ - int error; - char *filename; - - filename = getname(ufilename); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - goto out; - error = do_execve(filename, argv, envp, regs); - putname(filename); -out: - return error; -} - /* * Return saved PC of a blocked thread. This assumes the frame * pointer is the 6th saved long on the kernel stack and that the @@ -459,22 +439,3 @@ get_wchan(struct task_struct *p) } return pc; } - -int kernel_execve(const char *path, const char *const argv[], const char *const envp[]) -{ - /* Avoid the HAE being gratuitously wrong, which would cause us - to do the whole turn off interrupts thing and restore it. */ - struct pt_regs regs = {.hae = alpha_mv.hae_cache}; - int err = do_execve(path, argv, envp, ®s); - if (!err) { - struct pt_regs *p = current_pt_regs(); - /* copy regs to normal position and off to userland we go... */ - *p = regs; - __asm__ __volatile__ ( - "mov %0, $sp;" - "br $31, ret_from_sys_call" - : : "r"(p)); - } - return err; -} -EXPORT_SYMBOL(kernel_execve); diff --git a/arch/alpha/kernel/ptrace.c b/arch/alpha/kernel/ptrace.c index 54616f496aedb27629d298329a43ff8447113300..2a4a80ff4a2064262ea04298dee0a3d6e12f66be 100644 --- a/arch/alpha/kernel/ptrace.c +++ b/arch/alpha/kernel/ptrace.c @@ -13,6 +13,7 @@ #include #include #include +#include #include #include @@ -312,25 +313,18 @@ long arch_ptrace(struct task_struct *child, long request, return ret; } +asmlinkage unsigned long syscall_trace_enter(void) +{ + unsigned long ret = 0; + if (test_thread_flag(TIF_SYSCALL_TRACE) && + tracehook_report_syscall_entry(current_pt_regs())) + ret = -1UL; + return ret ?: current_pt_regs()->r0; +} + asmlinkage void -syscall_trace(void) +syscall_trace_leave(void) { - if (!test_thread_flag(TIF_SYSCALL_TRACE)) - return; - if (!(current->ptrace & PT_PTRACED)) - return; - /* The 0x80 provides a way for the tracing parent to distinguish - between a syscall stop and SIGTRAP delivery */ - ptrace_notify(SIGTRAP | ((current->ptrace & PT_TRACESYSGOOD) - ? 0x80 : 0)); - - /* - * This isn't the same as continuing with a signal, but it will do - * for normal use. strace only continues with a signal if the - * stopping signal is not SIGTRAP. -brl - */ - if (current->exit_code) { - send_sig(current->exit_code, current, 1); - current->exit_code = 0; - } + if (test_thread_flag(TIF_SYSCALL_TRACE)) + tracehook_report_syscall_exit(current_pt_regs(), 0); } diff --git a/arch/alpha/kernel/signal.c b/arch/alpha/kernel/signal.c index a8c97d42ec8eaef9215c32a40f743bd94505bc55..32575f85507d1a74d84198799dab405e07c94369 100644 --- a/arch/alpha/kernel/signal.c +++ b/arch/alpha/kernel/signal.c @@ -298,8 +298,9 @@ get_sigframe(struct k_sigaction *ka, unsigned long sp, size_t frame_size) static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, - struct switch_stack *sw, unsigned long mask, unsigned long sp) + unsigned long mask, unsigned long sp) { + struct switch_stack *sw = (struct switch_stack *)regs - 1; long i, err = 0; err |= __put_user(on_sig_stack((unsigned long)sc), &sc->sc_onstack); @@ -354,7 +355,7 @@ setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, static int setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, - struct pt_regs *regs, struct switch_stack * sw) + struct pt_regs *regs) { unsigned long oldsp, r26, err = 0; struct sigframe __user *frame; @@ -364,7 +365,7 @@ setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) return -EFAULT; - err |= setup_sigcontext(&frame->sc, regs, sw, set->sig[0], oldsp); + err |= setup_sigcontext(&frame->sc, regs, set->sig[0], oldsp); if (err) return -EFAULT; @@ -401,7 +402,7 @@ setup_frame(int sig, struct k_sigaction *ka, sigset_t *set, static int setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, - sigset_t *set, struct pt_regs *regs, struct switch_stack * sw) + sigset_t *set, struct pt_regs *regs) { unsigned long oldsp, r26, err = 0; struct rt_sigframe __user *frame; @@ -420,7 +421,7 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); err |= __put_user(sas_ss_flags(oldsp), &frame->uc.uc_stack.ss_flags); err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, sw, + err |= setup_sigcontext(&frame->uc.uc_mcontext, regs, set->sig[0], oldsp); err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); if (err) @@ -464,15 +465,15 @@ setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, */ static inline void handle_signal(int sig, struct k_sigaction *ka, siginfo_t *info, - struct pt_regs * regs, struct switch_stack *sw) + struct pt_regs * regs) { sigset_t *oldset = sigmask_to_save(); int ret; if (ka->sa.sa_flags & SA_SIGINFO) - ret = setup_rt_frame(sig, ka, info, oldset, regs, sw); + ret = setup_rt_frame(sig, ka, info, oldset, regs); else - ret = setup_frame(sig, ka, oldset, regs, sw); + ret = setup_frame(sig, ka, oldset, regs); if (ret) { force_sigsegv(sig, current); @@ -519,8 +520,7 @@ syscall_restart(unsigned long r0, unsigned long r19, * all (if we get here from anything but a syscall return, it will be 0) */ static void -do_signal(struct pt_regs * regs, struct switch_stack * sw, - unsigned long r0, unsigned long r19) +do_signal(struct pt_regs *regs, unsigned long r0, unsigned long r19) { siginfo_t info; int signr; @@ -537,7 +537,7 @@ do_signal(struct pt_regs * regs, struct switch_stack * sw, /* Whee! Actually deliver the signal. */ if (r0) syscall_restart(r0, r19, regs, &ka); - handle_signal(signr, &ka, &info, regs, sw); + handle_signal(signr, &ka, &info, regs); if (single_stepping) ptrace_set_bpt(current); /* re-set bpt */ return; @@ -568,15 +568,23 @@ do_signal(struct pt_regs * regs, struct switch_stack * sw, } void -do_notify_resume(struct pt_regs *regs, struct switch_stack *sw, - unsigned long thread_info_flags, +do_work_pending(struct pt_regs *regs, unsigned long thread_flags, unsigned long r0, unsigned long r19) { - if (thread_info_flags & _TIF_SIGPENDING) - do_signal(regs, sw, r0, r19); - - if (thread_info_flags & _TIF_NOTIFY_RESUME) { - clear_thread_flag(TIF_NOTIFY_RESUME); - tracehook_notify_resume(regs); - } + do { + if (thread_flags & _TIF_NEED_RESCHED) { + schedule(); + } else { + local_irq_enable(); + if (thread_flags & _TIF_SIGPENDING) { + do_signal(regs, r0, r19); + r0 = 0; + } else { + clear_thread_flag(TIF_NOTIFY_RESUME); + tracehook_notify_resume(regs); + } + } + local_irq_disable(); + thread_flags = current_thread_info()->flags; + } while (thread_flags & _TIF_WORK_MASK); } diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 7bab17ed29729b84c464be57d6aa9e76a9c7369d..73067efd484530d4021a220fecce329b4752b3c0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1,54 +1,60 @@ config ARM bool default y + select ARCH_BINFMT_ELF_RANDOMIZE_PIE + select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select ARCH_HAVE_CUSTOM_GPIO_H - select HAVE_AOUT - select HAVE_DMA_API_DEBUG - select HAVE_IDE if PCI || ISA || PCMCIA - select HAVE_DMA_ATTRS - select HAVE_DMA_CONTIGUOUS if MMU - select HAVE_MEMBLOCK - select RTC_LIB - select SYS_SUPPORTS_APM_EMULATION + select ARCH_WANT_IPC_PARSE_VERSION + select CPU_PM if (SUSPEND || CPU_IDLE) + select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN select GENERIC_ATOMIC64 if (CPU_V6 || !CPU_32v6K || !AEABI) - select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE - select HAVE_OPROFILE if (HAVE_PERF_EVENTS) + select GENERIC_CLOCKEVENTS_BROADCAST if SMP + select GENERIC_IRQ_PROBE + select GENERIC_IRQ_SHOW + select GENERIC_KERNEL_THREAD + select GENERIC_KERNEL_EXECVE + select GENERIC_PCI_IOMAP + select GENERIC_SMP_IDLE_THREAD + select GENERIC_STRNCPY_FROM_USER + select GENERIC_STRNLEN_USER + select HARDIRQS_SW_RESEND + select HAVE_AOUT select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB select HAVE_ARCH_TRACEHOOK - select HAVE_KPROBES if !XIP_KERNEL - select HAVE_KRETPROBES if (HAVE_KPROBES) - select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) - select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) + select HAVE_BPF_JIT + select HAVE_C_RECORDMCOUNT + select HAVE_DEBUG_KMEMLEAK + select HAVE_DMA_API_DEBUG + select HAVE_DMA_ATTRS + select HAVE_DMA_CONTIGUOUS if MMU select HAVE_DYNAMIC_FTRACE if (!XIP_KERNEL) + select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL) select HAVE_FUNCTION_GRAPH_TRACER if (!THUMB2_KERNEL) - select ARCH_BINFMT_ELF_RANDOMIZE_PIE + select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) select HAVE_GENERIC_DMA_COHERENT + select HAVE_GENERIC_HARDIRQS + select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) + select HAVE_IDE if PCI || ISA || PCMCIA + select HAVE_IRQ_WORK select HAVE_KERNEL_GZIP - select HAVE_KERNEL_LZO select HAVE_KERNEL_LZMA + select HAVE_KERNEL_LZO select HAVE_KERNEL_XZ - select HAVE_IRQ_WORK + select HAVE_KPROBES if !XIP_KERNEL + select HAVE_KRETPROBES if (HAVE_KPROBES) + select HAVE_MEMBLOCK + select HAVE_OPROFILE if (HAVE_PERF_EVENTS) select HAVE_PERF_EVENTS - select PERF_USE_VMALLOC select HAVE_REGS_AND_STACK_ACCESS_API - select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) - select HAVE_C_RECORDMCOUNT - select HAVE_GENERIC_HARDIRQS - select HARDIRQS_SW_RESEND - select GENERIC_IRQ_PROBE - select GENERIC_IRQ_SHOW - select ARCH_WANT_IPC_PARSE_VERSION - select HARDIRQS_SW_RESEND - select CPU_PM if (SUSPEND || CPU_IDLE) - select GENERIC_PCI_IOMAP - select HAVE_BPF_JIT - select GENERIC_SMP_IDLE_THREAD + select HAVE_SYSCALL_TRACEPOINTS + select HAVE_UID16 select KTIME_SCALAR - select GENERIC_CLOCKEVENTS_BROADCAST if SMP - select GENERIC_STRNCPY_FROM_USER - select GENERIC_STRNLEN_USER - select DCACHE_WORD_ACCESS if (CPU_V6 || CPU_V6K || CPU_V7) && !CPU_BIG_ENDIAN + select PERF_USE_VMALLOC + select RTC_LIB + select SYS_SUPPORTS_APM_EMULATION + select HAVE_MOD_ARCH_SPECIFIC if ARM_UNWIND + select MODULES_USE_ELF_REL help The ARM series is a line of low-power-consumption RISC chip designs licensed by ARM Ltd and targeted at embedded applications and @@ -64,9 +70,9 @@ config NEED_SG_DMA_LENGTH bool config ARM_DMA_USE_IOMMU - select NEED_SG_DMA_LENGTH - select ARM_HAS_SG_CHAIN bool + select ARM_HAS_SG_CHAIN + select NEED_SG_DMA_LENGTH config HAVE_PWM bool @@ -258,69 +264,69 @@ choice config ARCH_MULTIPLATFORM bool "Allow multiple platforms to be selected" + depends on MMU select ARM_PATCH_PHYS_VIRT select AUTO_ZRELADDR select COMMON_CLK select MULTI_IRQ_HANDLER select SPARSE_IRQ select USE_OF - depends on MMU config ARCH_INTEGRATOR bool "ARM Ltd. Integrator family" - select ARM_AMBA select ARCH_HAS_CPUFREQ + select ARM_AMBA select COMMON_CLK select COMMON_CLK_VERSATILE + select GENERIC_CLOCKEVENTS select HAVE_TCM select ICST - select GENERIC_CLOCKEVENTS + select MULTI_IRQ_HANDLER + select NEED_MACH_MEMORY_H select PLAT_VERSATILE select PLAT_VERSATILE_FPGA_IRQ - select NEED_MACH_MEMORY_H select SPARSE_IRQ - select MULTI_IRQ_HANDLER help Support for ARM's Integrator platform. config ARCH_REALVIEW bool "ARM Ltd. RealView family" + select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA + select ARM_TIMER_SP804 select COMMON_CLK select COMMON_CLK_VERSATILE - select ICST select GENERIC_CLOCKEVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB - select PLAT_VERSATILE - select PLAT_VERSATILE_CLCD - select ARM_TIMER_SP804 select GPIO_PL061 if GPIOLIB + select ICST select NEED_MACH_MEMORY_H + select PLAT_VERSATILE + select PLAT_VERSATILE_CLCD help This enables support for ARM Ltd RealView boards. config ARCH_VERSATILE bool "ARM Ltd. Versatile family" + select ARCH_WANT_OPTIONAL_GPIOLIB select ARM_AMBA + select ARM_TIMER_SP804 select ARM_VIC select CLKDEV_LOOKUP + select GENERIC_CLOCKEVENTS select HAVE_MACH_CLKDEV select ICST - select GENERIC_CLOCKEVENTS - select ARCH_WANT_OPTIONAL_GPIOLIB select PLAT_VERSATILE - select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_CLCD + select PLAT_VERSATILE_CLOCK select PLAT_VERSATILE_FPGA_IRQ - select ARM_TIMER_SP804 help This enables support for ARM Ltd Versatile board. config ARCH_AT91 bool "Atmel AT91" select ARCH_REQUIRE_GPIOLIB - select HAVE_CLK select CLKDEV_LOOKUP + select HAVE_CLK select IRQ_DOMAIN select NEED_MACH_GPIO_H select NEED_MACH_IO_H if PCCARD @@ -345,43 +351,43 @@ config ARCH_BCM2835 This enables support for the Broadcom BCM2835 SoC. This SoC is use in the Raspberry Pi, and Roku 2 devices. -config ARCH_CLPS711X - bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" - select CPU_ARM720T - select ARCH_USES_GETTIMEOFFSET - select COMMON_CLK - select CLKDEV_LOOKUP - select NEED_MACH_MEMORY_H - help - Support for Cirrus Logic 711x/721x/731x based boards. - config ARCH_CNS3XXX bool "Cavium Networks CNS3XXX family" + select ARM_GIC select CPU_V6K select GENERIC_CLOCKEVENTS - select ARM_GIC select MIGHT_HAVE_CACHE_L2X0 select MIGHT_HAVE_PCI select PCI_DOMAINS if PCI help Support for Cavium Networks CNS3XXX platform. +config ARCH_CLPS711X + bool "Cirrus Logic CLPS711x/EP721x/EP731x-based" + select ARCH_USES_GETTIMEOFFSET + select CLKDEV_LOOKUP + select COMMON_CLK + select CPU_ARM720T + select NEED_MACH_MEMORY_H + help + Support for Cirrus Logic 711x/721x/731x based boards. + config ARCH_GEMINI bool "Cortina Systems Gemini" - select CPU_FA526 select ARCH_REQUIRE_GPIOLIB select ARCH_USES_GETTIMEOFFSET + select CPU_FA526 help Support for the Cortina Systems Gemini family SoCs config ARCH_SIRF bool "CSR SiRF" - select NO_IOPORT select ARCH_REQUIRE_GPIOLIB - select GENERIC_CLOCKEVENTS select COMMON_CLK + select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select MIGHT_HAVE_CACHE_L2X0 + select NO_IOPORT select PINCTRL select PINCTRL_SIRF select USE_OF @@ -390,12 +396,12 @@ config ARCH_SIRF config ARCH_EBSA110 bool "EBSA-110" + select ARCH_USES_GETTIMEOFFSET select CPU_SA110 select ISA - select NO_IOPORT - select ARCH_USES_GETTIMEOFFSET select NEED_MACH_IO_H select NEED_MACH_MEMORY_H + select NO_IOPORT help This is an evaluation board for the StrongARM processor available from Digital. It has limited hardware on-board, including an @@ -404,13 +410,13 @@ config ARCH_EBSA110 config ARCH_EP93XX bool "EP93xx-based" - select CPU_ARM920T + select ARCH_HAS_HOLES_MEMORYMODEL + select ARCH_REQUIRE_GPIOLIB + select ARCH_USES_GETTIMEOFFSET select ARM_AMBA select ARM_VIC select CLKDEV_LOOKUP - select ARCH_REQUIRE_GPIOLIB - select ARCH_HAS_HOLES_MEMORYMODEL - select ARCH_USES_GETTIMEOFFSET + select CPU_ARM920T select NEED_MACH_MEMORY_H help This enables support for the Cirrus EP93xx series of CPUs. @@ -429,10 +435,10 @@ config ARCH_FOOTBRIDGE config ARCH_MXC bool "Freescale MXC/iMX-based" - select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO + select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP select MULTI_IRQ_HANDLER select SPARSE_IRQ @@ -442,11 +448,11 @@ config ARCH_MXC config ARCH_MXS bool "Freescale MXS-based" - select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO select COMMON_CLK + select GENERIC_CLOCKEVENTS select HAVE_CLK_PREPARE select MULTI_IRQ_HANDLER select PINCTRL @@ -457,44 +463,43 @@ config ARCH_MXS config ARCH_NETX bool "Hilscher NetX based" + select ARM_VIC select CLKSRC_MMIO select CPU_ARM926T - select ARM_VIC select GENERIC_CLOCKEVENTS help This enables support for systems based on the Hilscher NetX Soc config ARCH_H720X bool "Hynix HMS720x-based" + select ARCH_USES_GETTIMEOFFSET select CPU_ARM720T select ISA_DMA_API - select ARCH_USES_GETTIMEOFFSET help This enables support for systems based on the Hynix HMS720x config ARCH_IOP13XX bool "IOP13xx-based" depends on MMU - select CPU_XSC3 - select PLAT_IOP - select PCI select ARCH_SUPPORTS_MSI - select VMSPLIT_1G + select CPU_XSC3 select NEED_MACH_MEMORY_H select NEED_RET_TO_USER + select PCI + select PLAT_IOP + select VMSPLIT_1G help Support for Intel's IOP13XX (XScale) family of processors. config ARCH_IOP32X bool "IOP32x-based" depends on MMU + select ARCH_REQUIRE_GPIOLIB select CPU_XSCALE select NEED_MACH_GPIO_H - select NEED_MACH_IO_H select NEED_RET_TO_USER - select PLAT_IOP select PCI - select ARCH_REQUIRE_GPIOLIB + select PLAT_IOP help Support for Intel's 80219 and IOP32X (XScale) family of processors. @@ -502,13 +507,12 @@ config ARCH_IOP32X config ARCH_IOP33X bool "IOP33x-based" depends on MMU + select ARCH_REQUIRE_GPIOLIB select CPU_XSCALE select NEED_MACH_GPIO_H - select NEED_MACH_IO_H select NEED_RET_TO_USER - select PLAT_IOP select PCI - select ARCH_REQUIRE_GPIOLIB + select PLAT_IOP help Support for Intel's IOP33X (XScale) family of processors. @@ -516,59 +520,45 @@ config ARCH_IXP4XX bool "IXP4xx-based" depends on MMU select ARCH_HAS_DMA_SET_COHERENT_MASK + select ARCH_REQUIRE_GPIOLIB select CLKSRC_MMIO select CPU_XSCALE - select ARCH_REQUIRE_GPIOLIB + select DMABOUNCE if PCI select GENERIC_CLOCKEVENTS select MIGHT_HAVE_PCI select NEED_MACH_IO_H - select DMABOUNCE if PCI help Support for Intel's IXP4XX (XScale) family of processors. config ARCH_DOVE bool "Marvell Dove" - select CPU_V7 - select PCI select ARCH_REQUIRE_GPIOLIB + select CPU_V7 select GENERIC_CLOCKEVENTS - select PLAT_ORION + select MIGHT_HAVE_PCI + select PLAT_ORION_LEGACY + select USB_ARCH_HAS_EHCI help Support for the Marvell Dove SoC 88AP510 config ARCH_KIRKWOOD bool "Marvell Kirkwood" - select CPU_FEROCEON - select PCI select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON select GENERIC_CLOCKEVENTS - select PLAT_ORION + select PCI + select PLAT_ORION_LEGACY help Support for the following Marvell Kirkwood series SoCs: 88F6180, 88F6192 and 88F6281. -config ARCH_LPC32XX - bool "NXP LPC32XX" - select CLKSRC_MMIO - select CPU_ARM926T - select ARCH_REQUIRE_GPIOLIB - select HAVE_IDE - select ARM_AMBA - select USB_ARCH_HAS_OHCI - select CLKDEV_LOOKUP - select GENERIC_CLOCKEVENTS - select USE_OF - select HAVE_PWM - help - Support for the NXP LPC32XX family of processors - config ARCH_MV78XX0 bool "Marvell MV78xx0" - select CPU_FEROCEON - select PCI select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON select GENERIC_CLOCKEVENTS - select PLAT_ORION + select PCI + select PLAT_ORION_LEGACY help Support for the following Marvell MV78xx0 series SoCs: MV781x0, MV782x0. @@ -576,11 +566,11 @@ config ARCH_MV78XX0 config ARCH_ORION5X bool "Marvell Orion" depends on MMU - select CPU_FEROCEON - select PCI select ARCH_REQUIRE_GPIOLIB + select CPU_FEROCEON select GENERIC_CLOCKEVENTS - select PLAT_ORION + select PCI + select PLAT_ORION_LEGACY help Support for the following Marvell Orion 5x series SoCs: Orion-1 (5181), Orion-VoIP (5181L), Orion-NAS (5182), @@ -591,33 +581,33 @@ config ARCH_MMP depends on MMU select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select GENERIC_ALLOCATOR select GENERIC_CLOCKEVENTS select GPIO_PXA select IRQ_DOMAIN + select NEED_MACH_GPIO_H select PLAT_PXA select SPARSE_IRQ - select GENERIC_ALLOCATOR - select NEED_MACH_GPIO_H help Support for Marvell's PXA168/PXA910(MMP) and MMP2 processor line. config ARCH_KS8695 bool "Micrel/Kendin KS8695" - select CPU_ARM922T select ARCH_REQUIRE_GPIOLIB - select NEED_MACH_MEMORY_H select CLKSRC_MMIO + select CPU_ARM922T select GENERIC_CLOCKEVENTS + select NEED_MACH_MEMORY_H help Support for Micrel/Kendin KS8695 "Centaur" (ARM922T) based System-on-Chip devices. config ARCH_W90X900 bool "Nuvoton W90X900 CPU" - select CPU_ARM926T select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP select CLKSRC_MMIO + select CPU_ARM926T select GENERIC_CLOCKEVENTS help Support for Nuvoton (Winbond logic dept.) ARM9 processor, @@ -628,18 +618,33 @@ config ARCH_W90X900 +config ARCH_LPC32XX + bool "NXP LPC32XX" + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + select HAVE_IDE + select HAVE_PWM + select USB_ARCH_HAS_OHCI + select USE_OF + help + Support for the NXP LPC32XX family of processors + config ARCH_TEGRA bool "NVIDIA Tegra" + select ARCH_HAS_CPUFREQ select CLKDEV_LOOKUP select CLKSRC_MMIO + select COMMON_CLK select GENERIC_CLOCKEVENTS select GENERIC_GPIO select HAVE_CLK select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 - select ARCH_HAS_CPUFREQ select USE_OF - select COMMON_CLK help This enables support for NVIDIA Tegra based systems (Tegra APX, Tegra 6xx and Tegra 2 series). @@ -647,29 +652,29 @@ config ARCH_TEGRA config ARCH_PXA bool "PXA2xx/PXA3xx-based" depends on MMU - select ARCH_MTD_XIP select ARCH_HAS_CPUFREQ + select ARCH_MTD_XIP + select ARCH_REQUIRE_GPIOLIB + select ARM_CPU_SUSPEND if PM + select AUTO_ZRELADDR select CLKDEV_LOOKUP select CLKSRC_MMIO - select ARCH_REQUIRE_GPIOLIB select GENERIC_CLOCKEVENTS select GPIO_PXA - select PLAT_PXA - select SPARSE_IRQ - select AUTO_ZRELADDR - select MULTI_IRQ_HANDLER - select ARM_CPU_SUSPEND if PM select HAVE_IDE + select MULTI_IRQ_HANDLER select NEED_MACH_GPIO_H + select PLAT_PXA + select SPARSE_IRQ help Support for Intel/Marvell's PXA2xx/PXA3xx processor line. config ARCH_MSM bool "Qualcomm MSM" - select HAVE_CLK - select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB select CLKDEV_LOOKUP + select GENERIC_CLOCKEVENTS + select HAVE_CLK help Support for Qualcomm MSM/QSD based systems. This runs on the apps processor of the MSM/QSD and depends on a shared memory @@ -679,50 +684,50 @@ config ARCH_MSM config ARCH_SHMOBILE bool "Renesas SH-Mobile / R-Mobile" - select HAVE_CLK select CLKDEV_LOOKUP + select GENERIC_CLOCKEVENTS + select HAVE_CLK select HAVE_MACH_CLKDEV select HAVE_SMP - select GENERIC_CLOCKEVENTS select MIGHT_HAVE_CACHE_L2X0 - select NO_IOPORT - select SPARSE_IRQ select MULTI_IRQ_HANDLER - select PM_GENERIC_DOMAINS if PM select NEED_MACH_MEMORY_H + select NO_IOPORT + select PM_GENERIC_DOMAINS if PM + select SPARSE_IRQ help Support for Renesas's SH-Mobile and R-Mobile ARM platforms. config ARCH_RPC bool "RiscPC" select ARCH_ACORN - select FIQ select ARCH_MAY_HAVE_PC_FDC - select HAVE_PATA_PLATFORM - select ISA_DMA_API - select NO_IOPORT select ARCH_SPARSEMEM_ENABLE select ARCH_USES_GETTIMEOFFSET + select FIQ select HAVE_IDE + select HAVE_PATA_PLATFORM + select ISA_DMA_API select NEED_MACH_IO_H select NEED_MACH_MEMORY_H + select NO_IOPORT help On the Acorn Risc-PC, Linux can support the internal IDE disk and CD-ROM interface, serial and parallel port, and the floppy drive. config ARCH_SA1100 bool "SA1100-based" - select CLKSRC_MMIO - select CPU_SA1100 - select ISA - select ARCH_SPARSEMEM_ENABLE - select ARCH_MTD_XIP select ARCH_HAS_CPUFREQ + select ARCH_MTD_XIP + select ARCH_REQUIRE_GPIOLIB + select ARCH_SPARSEMEM_ENABLE + select CLKDEV_LOOKUP + select CLKSRC_MMIO select CPU_FREQ + select CPU_SA1100 select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP - select ARCH_REQUIRE_GPIOLIB select HAVE_IDE + select ISA select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H select SPARSE_IRQ @@ -731,14 +736,14 @@ config ARCH_SA1100 config ARCH_S3C24XX bool "Samsung S3C24XX SoCs" - select GENERIC_GPIO select ARCH_HAS_CPUFREQ - select HAVE_CLK - select CLKDEV_LOOKUP select ARCH_USES_GETTIMEOFFSET + select CLKDEV_LOOKUP + select GENERIC_GPIO + select HAVE_CLK select HAVE_S3C2410_I2C if I2C - select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H select NEED_MACH_IO_H help @@ -749,38 +754,38 @@ config ARCH_S3C24XX config ARCH_S3C64XX bool "Samsung S3C64XX" - select PLAT_SAMSUNG - select CPU_V6 + select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB + select ARCH_USES_GETTIMEOFFSET select ARM_VIC + select CLKDEV_LOOKUP + select CPU_V6 select HAVE_CLK + select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_TCM - select CLKDEV_LOOKUP + select NEED_MACH_GPIO_H select NO_IOPORT - select ARCH_USES_GETTIMEOFFSET - select ARCH_HAS_CPUFREQ - select ARCH_REQUIRE_GPIOLIB + select PLAT_SAMSUNG + select S3C_DEV_NAND + select S3C_GPIO_TRACK select SAMSUNG_CLKSRC + select SAMSUNG_GPIOLIB_4BIT select SAMSUNG_IRQ_VIC_TIMER - select S3C_GPIO_TRACK - select S3C_DEV_NAND select USB_ARCH_HAS_OHCI - select SAMSUNG_GPIOLIB_4BIT - select HAVE_S3C2410_I2C if I2C - select HAVE_S3C2410_WATCHDOG if WATCHDOG - select NEED_MACH_GPIO_H help Samsung S3C64XX series based systems config ARCH_S5P64X0 bool "Samsung S5P6440 S5P6450" - select CPU_V6 - select GENERIC_GPIO - select HAVE_CLK select CLKDEV_LOOKUP select CLKSRC_MMIO - select HAVE_S3C2410_WATCHDOG if WATCHDOG + select CPU_V6 select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select HAVE_CLK select HAVE_S3C2410_I2C if I2C + select HAVE_S3C2410_WATCHDOG if WATCHDOG select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H help @@ -789,50 +794,50 @@ config ARCH_S5P64X0 config ARCH_S5PC100 bool "Samsung S5PC100" - select GENERIC_GPIO - select HAVE_CLK + select ARCH_USES_GETTIMEOFFSET select CLKDEV_LOOKUP select CPU_V7 - select ARCH_USES_GETTIMEOFFSET + select GENERIC_GPIO + select HAVE_CLK select HAVE_S3C2410_I2C if I2C - select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H help Samsung S5PC100 series based systems config ARCH_S5PV210 bool "Samsung S5PV210/S5PC110" - select CPU_V7 - select ARCH_SPARSEMEM_ENABLE + select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL - select GENERIC_GPIO - select HAVE_CLK + select ARCH_SPARSEMEM_ENABLE select CLKDEV_LOOKUP select CLKSRC_MMIO - select ARCH_HAS_CPUFREQ + select CPU_V7 select GENERIC_CLOCKEVENTS + select GENERIC_GPIO + select HAVE_CLK select HAVE_S3C2410_I2C if I2C - select HAVE_S3C_RTC if RTC_CLASS select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H help Samsung S5PV210/S5PC110 series based systems config ARCH_EXYNOS - bool "SAMSUNG EXYNOS" - select CPU_V7 - select ARCH_SPARSEMEM_ENABLE + bool "Samsung EXYNOS" + select ARCH_HAS_CPUFREQ select ARCH_HAS_HOLES_MEMORYMODEL - select GENERIC_GPIO - select HAVE_CLK + select ARCH_SPARSEMEM_ENABLE select CLKDEV_LOOKUP - select ARCH_HAS_CPUFREQ + select CPU_V7 select GENERIC_CLOCKEVENTS - select HAVE_S3C_RTC if RTC_CLASS + select GENERIC_GPIO + select HAVE_CLK select HAVE_S3C2410_I2C if I2C select HAVE_S3C2410_WATCHDOG if WATCHDOG + select HAVE_S3C_RTC if RTC_CLASS select NEED_MACH_GPIO_H select NEED_MACH_MEMORY_H help @@ -840,13 +845,13 @@ config ARCH_EXYNOS config ARCH_SHARK bool "Shark" + select ARCH_USES_GETTIMEOFFSET select CPU_SA110 select ISA select ISA_DMA - select ZONE_DMA - select PCI - select ARCH_USES_GETTIMEOFFSET select NEED_MACH_MEMORY_H + select PCI + select ZONE_DMA help Support for the StrongARM based Digital DNARD machine, also known as "Shark" (). @@ -854,17 +859,17 @@ config ARCH_SHARK config ARCH_U300 bool "ST-Ericsson U300 Series" depends on MMU - select CLKSRC_MMIO - select CPU_ARM926T - select HAVE_TCM + select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_PATCH_PHYS_VIRT select ARM_VIC - select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP + select CLKSRC_MMIO select COMMON_CLK + select CPU_ARM926T + select GENERIC_CLOCKEVENTS select GENERIC_GPIO - select ARCH_REQUIRE_GPIOLIB + select HAVE_TCM select SPARSE_IRQ help Support for ST-Ericsson U300 series mobile platforms. @@ -872,12 +877,12 @@ config ARCH_U300 config ARCH_U8500 bool "ST-Ericsson U8500 Series" depends on MMU - select CPU_V7 + select ARCH_HAS_CPUFREQ + select ARCH_REQUIRE_GPIOLIB select ARM_AMBA - select GENERIC_CLOCKEVENTS select CLKDEV_LOOKUP - select ARCH_REQUIRE_GPIOLIB - select ARCH_HAS_CPUFREQ + select CPU_V7 + select GENERIC_CLOCKEVENTS select HAVE_SMP select MIGHT_HAVE_CACHE_L2X0 help @@ -885,78 +890,78 @@ config ARCH_U8500 config ARCH_NOMADIK bool "STMicroelectronics Nomadik" + select ARCH_REQUIRE_GPIOLIB select ARM_AMBA select ARM_VIC - select CPU_ARM926T select COMMON_CLK + select CPU_ARM926T select GENERIC_CLOCKEVENTS + select MIGHT_HAVE_CACHE_L2X0 select PINCTRL select PINCTRL_STN8815 - select MIGHT_HAVE_CACHE_L2X0 - select ARCH_REQUIRE_GPIOLIB help Support for the Nomadik platform by ST-Ericsson +config PLAT_SPEAR + bool "ST SPEAr" + select ARCH_REQUIRE_GPIOLIB + select ARM_AMBA + select CLKDEV_LOOKUP + select CLKSRC_MMIO + select COMMON_CLK + select GENERIC_CLOCKEVENTS + select HAVE_CLK + help + Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). + config ARCH_DAVINCI bool "TI DaVinci" - select GENERIC_CLOCKEVENTS + select ARCH_HAS_HOLES_MEMORYMODEL select ARCH_REQUIRE_GPIOLIB - select ZONE_DMA - select HAVE_IDE select CLKDEV_LOOKUP select GENERIC_ALLOCATOR + select GENERIC_CLOCKEVENTS select GENERIC_IRQ_CHIP - select ARCH_HAS_HOLES_MEMORYMODEL + select HAVE_IDE select NEED_MACH_GPIO_H + select ZONE_DMA help Support for TI's DaVinci platform. config ARCH_OMAP bool "TI OMAP" depends on MMU - select HAVE_CLK - select ARCH_REQUIRE_GPIOLIB select ARCH_HAS_CPUFREQ - select CLKSRC_MMIO - select GENERIC_CLOCKEVENTS select ARCH_HAS_HOLES_MEMORYMODEL - select NEED_MACH_GPIO_H - help - Support for TI's OMAP platform (OMAP1/2/3/4). - -config PLAT_SPEAR - bool "ST SPEAr" - select ARM_AMBA select ARCH_REQUIRE_GPIOLIB - select CLKDEV_LOOKUP - select COMMON_CLK select CLKSRC_MMIO select GENERIC_CLOCKEVENTS select HAVE_CLK + select NEED_MACH_GPIO_H help - Support for ST's SPEAr platform (SPEAr3xx, SPEAr6xx and SPEAr13xx). + Support for TI's OMAP platform (OMAP1/2/3/4). config ARCH_VT8500 bool "VIA/WonderMedia 85xx" - select CPU_ARM926T - select GENERIC_GPIO select ARCH_HAS_CPUFREQ - select GENERIC_CLOCKEVENTS select ARCH_REQUIRE_GPIOLIB - select USE_OF + select CLKDEV_LOOKUP select COMMON_CLK + select CPU_ARM926T + select GENERIC_CLOCKEVENTS + select GENERIC_GPIO select HAVE_CLK - select CLKDEV_LOOKUP + select USE_OF help Support for VIA/WonderMedia VT8500/WM85xx System-on-Chip. config ARCH_ZYNQ bool "Xilinx Zynq ARM Cortex A9 Platform" + select ARM_AMBA + select ARM_GIC + select CLKDEV_LOOKUP select CPU_V7 select GENERIC_CLOCKEVENTS - select CLKDEV_LOOKUP - select ARM_GIC - select ARM_AMBA select ICST select MIGHT_HAVE_CACHE_L2X0 select USE_OF @@ -971,33 +976,33 @@ comment "CPU Core family selection" config ARCH_MULTI_V4 bool "ARMv4 based platforms (FA526, StrongARM)" - select ARCH_MULTI_V4_V5 depends on !ARCH_MULTI_V6_V7 + select ARCH_MULTI_V4_V5 config ARCH_MULTI_V4T bool "ARMv4T based platforms (ARM720T, ARM920T, ...)" - select ARCH_MULTI_V4_V5 depends on !ARCH_MULTI_V6_V7 + select ARCH_MULTI_V4_V5 config ARCH_MULTI_V5 bool "ARMv5 based platforms (ARM926T, XSCALE, PJ1, ...)" - select ARCH_MULTI_V4_V5 depends on !ARCH_MULTI_V6_V7 + select ARCH_MULTI_V4_V5 config ARCH_MULTI_V4_V5 bool config ARCH_MULTI_V6 bool "ARMv6 based platforms (ARM11, Scorpion, ...)" - select CPU_V6 select ARCH_MULTI_V6_V7 + select CPU_V6 config ARCH_MULTI_V7 bool "ARMv7 based platforms (Cortex-A, PJ4, Krait)" - select CPU_V7 - select ARCH_VEXPRESS default y select ARCH_MULTI_V6_V7 + select ARCH_VEXPRESS + select CPU_V7 config ARCH_MULTI_V6_V7 bool @@ -1134,9 +1139,13 @@ config PLAT_IOP config PLAT_ORION bool select CLKSRC_MMIO + select COMMON_CLK select GENERIC_IRQ_CHIP select IRQ_DOMAIN - select COMMON_CLK + +config PLAT_ORION_LEGACY + bool + select PLAT_ORION config PLAT_PXA bool @@ -1397,6 +1406,16 @@ config PL310_ERRATA_769419 on systems with an outer cache, the store buffer is drained explicitly. +config ARM_ERRATA_775420 + bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" + depends on CPU_V7 + help + This option enables the workaround for the 775420 Cortex-A9 (r2p2, + r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance + operation aborts with MMU exception, it might cause the processor + to deadlock. This workaround puts DSB before executing ISB if + an abort may occur on cache maintenance. + endmenu source "arch/arm/common/Kconfig" @@ -1480,8 +1499,8 @@ config SMP depends on GENERIC_CLOCKEVENTS depends on HAVE_SMP depends on MMU - select USE_GENERIC_SMP_HELPERS select HAVE_ARM_SCU if !ARCH_MSM_SCORPIONMP + select USE_GENERIC_SMP_HELPERS help This enables support for systems with more than one CPU. If you have a system with only one CPU, like most personal computers, say N. If @@ -1753,6 +1772,7 @@ source "mm/Kconfig" config FORCE_MAX_ZONEORDER int "Maximum zone order" if ARCH_SHMOBILE range 11 64 if ARCH_SHMOBILE + default "12" if SOC_AM33XX default "9" if SA1111 default "11" help @@ -1781,8 +1801,8 @@ config ALIGNMENT_TRAP configuration it is safe to say N, otherwise say Y. config UACCESS_WITH_MEMCPY - bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)" - depends on MMU && EXPERIMENTAL + bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()" + depends on MMU default y if CPU_FEROCEON help Implement faster copy_to_user and clear_user methods for CPU @@ -1823,11 +1843,15 @@ config CC_STACKPROTECTOR neutralized via a kernel panic. This feature requires gcc version 4.2 or above. -config DEPRECATED_PARAM_STRUCT - bool "Provide old way to pass kernel parameters" +config XEN_DOM0 + def_bool y + depends on XEN + +config XEN + bool "Xen guest support on ARM (EXPERIMENTAL)" + depends on EXPERIMENTAL && ARM && OF help - This was deprecated in 2001 and announced to live on for 5 years. - Some old boot loaders still use this way. + Say Y if you want to run Linux in a Virtual Machine on Xen on ARM. endmenu @@ -1835,12 +1859,29 @@ menu "Boot options" config USE_OF bool "Flattened Device Tree support" + select IRQ_DOMAIN select OF select OF_EARLY_FLATTREE - select IRQ_DOMAIN help Include support for flattened device tree machine descriptions. +config ATAGS + bool "Support for the traditional ATAGS boot data passing" if USE_OF + default y + help + This is the traditional way of passing data to the kernel at boot + time. If you are solely relying on the flattened device tree (or + the ARM_ATAG_DTB_COMPAT option) then you may unselect this option + to remove ATAGS support from your kernel binary. If unsure, + leave this to y. + +config DEPRECATED_PARAM_STRUCT + bool "Provide old way to pass kernel parameters" + depends on ATAGS + help + This was deprecated in 2001 and announced to live on for 5 years. + Some old boot loaders still use this way. + # Compressed boot loader in ROM. Yes, we really want to ask about # TEXT and BSS so we preserve their values in the config files. config ZBOOT_ROM_TEXT @@ -1967,6 +2008,7 @@ config CMDLINE choice prompt "Kernel command line type" if CMDLINE != "" default CMDLINE_FROM_BOOTLOADER + depends on ATAGS config CMDLINE_FROM_BOOTLOADER bool "Use bootloader kernel arguments if available" @@ -2036,7 +2078,7 @@ config KEXEC config ATAGS_PROC bool "Export atags in procfs" - depends on KEXEC + depends on ATAGS && KEXEC default y help Should the atags used to boot the kernel be exported in an "atags" @@ -2101,8 +2143,8 @@ config CPU_FREQ_PXA bool depends on CPU_FREQ && ARCH_PXA && PXA25x default y - select CPU_FREQ_TABLE select CPU_FREQ_DEFAULT_GOV_USERSPACE + select CPU_FREQ_TABLE config CPU_FREQ_S3C bool diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 770da51242c412684cd0ba609ff955ee029c48da..f023e3acdfbd8c7c17335cfa9518df05119f4ab7 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -250,10 +250,12 @@ endif core-$(CONFIG_FPE_NWFPE) += arch/arm/nwfpe/ core-$(CONFIG_FPE_FASTFPE) += $(FASTFPE_OBJ) core-$(CONFIG_VFP) += arch/arm/vfp/ +core-$(CONFIG_XEN) += arch/arm/xen/ # If we have a machine-specific directory, then include it in the build. core-y += arch/arm/kernel/ arch/arm/mm/ arch/arm/common/ core-y += arch/arm/net/ +core-y += arch/arm/crypto/ core-y += $(machdirs) $(platdirs) drivers-$(CONFIG_OPROFILE) += arch/arm/oprofile/ @@ -267,7 +269,12 @@ else KBUILD_IMAGE := zImage endif -all: $(KBUILD_IMAGE) +# Build the DT binary blobs if we have OF configured +ifeq ($(CONFIG_USE_OF),y) +KBUILD_DTBS := dtbs +endif + +all: $(KBUILD_IMAGE) $(KBUILD_DTBS) boot := arch/arm/boot @@ -305,7 +312,7 @@ define archhelp echo ' uImage - U-Boot wrapped zImage' echo ' bootpImage - Combined zImage and initial RAM disk' echo ' (supply initrd image via make variable INITRD=)' - echo ' dtbs - Build device tree blobs for enabled boards' + echo '* dtbs - Build device tree blobs for enabled boards' echo ' install - Install uncompressed kernel' echo ' zinstall - Install compressed kernel' echo ' uinstall - Install U-Boot wrapped compressed kernel' diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index d0d441c429ae3e4e6c438fad1c51c7079c6eda5b..f79a08efe000aa490c1c010715cd0147baa869c0 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -1,6 +1,7 @@ ashldi3.S font.c lib1funcs.S +hyp-stub.S piggy.gzip piggy.lzo piggy.lzma diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile index bb267562e7ed9a763218c83eaeb2c5c8645debb9..a517153a13eabdad582b6b6f75080cf93f699595 100644 --- a/arch/arm/boot/compressed/Makefile +++ b/arch/arm/boot/compressed/Makefile @@ -30,6 +30,10 @@ FONTC = $(srctree)/drivers/video/console/font_acorn_8x8.c OBJS += string.o CFLAGS_string.o := -Os +ifeq ($(CONFIG_ARM_VIRT_EXT),y) +OBJS += hyp-stub.o +endif + # # Architecture dependencies # @@ -126,7 +130,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS)) endif ccflags-y := -fpic -fno-builtin -I$(obj) -asflags-y := -Wa,-march=all +asflags-y := -Wa,-march=all -DZIMAGE # Supply kernel BSS size to the decompressor via a linker symbol. KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \ @@ -198,3 +202,6 @@ $(obj)/font.c: $(FONTC) $(obj)/vmlinux.lds: $(obj)/vmlinux.lds.in arch/arm/boot/Makefile $(KCONFIG_CONFIG) @sed "$(SEDFLAGS)" < $< > $@ + +$(obj)/hyp-stub.S: $(srctree)/arch/$(SRCARCH)/kernel/hyp-stub.S + $(call cmd,shipped) diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c index f41b38cafce80b046217364df5947926dfccf46b..9deb56a702ce743e1534b55054b7d1ba5685e28c 100644 --- a/arch/arm/boot/compressed/decompress.c +++ b/arch/arm/boot/compressed/decompress.c @@ -32,6 +32,9 @@ extern void error(char *); # define Tracecv(c,x) #endif +/* Not needed, but used in some headers pulled in by decompressors */ +extern char * strstr(const char * s1, const char *s2); + #ifdef CONFIG_KERNEL_GZIP #include "../../../../lib/decompress_inflate.c" #endif diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index bc67cbff39448ff84a3f0c14cd22876975ee1965..90275f036cd14517affdb724ea4c6adf5194b72c 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -9,6 +9,7 @@ * published by the Free Software Foundation. */ #include +#include /* * Debugging stuff @@ -132,7 +133,12 @@ start: .word start @ absolute load/run zImage address .word _edata @ zImage end address THUMB( .thumb ) -1: mov r7, r1 @ save architecture ID +1: + mrs r9, cpsr +#ifdef CONFIG_ARM_VIRT_EXT + bl __hyp_stub_install @ get into SVC mode, reversibly +#endif + mov r7, r1 @ save architecture ID mov r8, r2 @ save atags pointer #ifndef __ARM_ARCH_2__ @@ -148,9 +154,9 @@ start: ARM( swi 0x123456 ) @ angel_SWI_ARM THUMB( svc 0xab ) @ angel_SWI_THUMB not_angel: - mrs r2, cpsr @ turn off interrupts to - orr r2, r2, #0xc0 @ prevent angel from running - msr cpsr_c, r2 + safe_svcmode_maskall r0 + msr spsr_cxsf, r9 @ Save the CPU boot mode in + @ SPSR #else teqp pc, #0x0c000003 @ turn off interrupts #endif @@ -350,6 +356,20 @@ dtb_check_done: adr r5, restart bic r5, r5, #31 +/* Relocate the hyp vector base if necessary */ +#ifdef CONFIG_ARM_VIRT_EXT + mrs r0, spsr + and r0, r0, #MODE_MASK + cmp r0, #HYP_MODE + bne 1f + + bl __hyp_get_vectors + sub r0, r0, r5 + add r0, r0, r10 + bl __hyp_set_vectors +1: +#endif + sub r9, r6, r5 @ size to copy add r9, r9, #31 @ rounded up to a multiple bic r9, r9, #31 @ ... of 32 bytes @@ -458,11 +478,29 @@ not_relocated: mov r0, #0 bl decompress_kernel bl cache_clean_flush bl cache_off - mov r0, #0 @ must be zero mov r1, r7 @ restore architecture number mov r2, r8 @ restore atags pointer - ARM( mov pc, r4 ) @ call kernel - THUMB( bx r4 ) @ entry point is always ARM + +#ifdef CONFIG_ARM_VIRT_EXT + mrs r0, spsr @ Get saved CPU boot mode + and r0, r0, #MODE_MASK + cmp r0, #HYP_MODE @ if not booted in HYP mode... + bne __enter_kernel @ boot kernel directly + + adr r12, .L__hyp_reentry_vectors_offset + ldr r0, [r12] + add r0, r0, r12 + + bl __hyp_set_vectors + __HVC(0) @ otherwise bounce to hyp mode + + b . @ should never be reached + + .align 2 +.L__hyp_reentry_vectors_offset: .long __hyp_reentry_vectors - . +#else + b __enter_kernel +#endif .align 2 .type LC0, #object @@ -1196,6 +1234,25 @@ memdump: mov r12, r0 #endif .ltorg + +#ifdef CONFIG_ARM_VIRT_EXT +.align 5 +__hyp_reentry_vectors: + W(b) . @ reset + W(b) . @ undef + W(b) . @ svc + W(b) . @ pabort + W(b) . @ dabort + W(b) __enter_kernel @ hyp + W(b) . @ irq + W(b) . @ fiq +#endif /* CONFIG_ARM_VIRT_EXT */ + +__enter_kernel: + mov r0, #0 @ must be 0 + ARM( mov pc, r4 ) @ call kernel + THUMB( bx r4 ) @ entry point is always ARM + reloc_code_end: .align diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 43c084c2cd6682074e45c57090c0d3ee4a2e38d0..c1ce813fcc4a1ea9094eb450ce4e50efd3d6048b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -17,26 +17,24 @@ dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \ usb_a9263.dtb \ usb_a9g20.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb +dtb-$(CONFIG_ARCH_DOVE) += dove-cm-a510.dtb \ + dove-cubox.dtb \ + dove-dove-db.dtb dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-smdkv310.dtb \ exynos4210-trats.dtb \ exynos5250-smdk5250.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb -dtb-$(CONFIG_ARCH_IMX5) += imx51-babbage.dtb \ - imx53-ard.dtb \ - imx53-evk.dtb \ - imx53-qsb.dtb \ - imx53-smd.dtb -dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ - imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ + kirkwood-dockstar.dtb \ kirkwood-dreamplug.dtb \ kirkwood-goflexnet.dtb \ kirkwood-ib62x0.dtb \ kirkwood-iconnect.dtb \ + kirkwood-iomega_ix2_200.dtb \ + kirkwood-km_kirkwood.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ kirkwood-ts219-6281.dtb \ @@ -70,7 +68,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap4-pandaES.dtb \ omap4-var_som.dtb \ omap4-sdp.dtb \ - omap5-evm.dtb + omap5-evm.dtb \ + am335x-evm.dtb \ + am335x-bone.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += snowball.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ @@ -96,6 +96,10 @@ dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca9.dtb \ vexpress-v2p-ca15-tc1.dtb \ - vexpress-v2p-ca15_a7.dtb + vexpress-v2p-ca15_a7.dtb \ + xenvm-4.2.dtb +dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ + wm8505-ref.dtb \ + wm8650-mid.dtb endif diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 6b6b932a5a7dc291c4414ef1fc01404bfff06724..16cc82cdaa817aef1cb2e235c93b8412ddfb7af8 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -63,6 +63,11 @@ reg = <0xd0020300 0x30>; interrupts = <37>, <38>, <39>, <40>; }; + + addr-decoding@d0020000 { + compatible = "marvell,armada-addr-decoding-controller"; + reg = <0xd0020000 0x258>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 3228ccc83332f4e0bbe2bb94d4ed750afcea4fa2..2069151afe01583ecb07c07f7f3cb91477a889d9 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -21,6 +21,12 @@ model = "Marvell Armada 370 family SoC"; compatible = "marvell,armada370", "marvell,armada-370-xp"; + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + mpic: interrupt-controller@d0020000 { reg = <0xd0020a00 0x1d0>, <0xd0021870 0x58>; @@ -31,5 +37,43 @@ compatible = "marvell,armada-370-xp-system-controller"; reg = <0xd0018200 0x100>; }; + + pinctrl { + compatible = "marvell,mv88f6710-pinctrl"; + reg = <0xd0018000 0x38>; + }; + + gpio0: gpio@d0018100 { + compatible = "marvell,orion-gpio"; + reg = <0xd0018100 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <82>, <83>, <84>, <85>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,orion-gpio"; + reg = <0xd0018140 0x40>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <87>, <88>, <89>, <90>; + }; + + gpio2: gpio@d0018180 { + compatible = "marvell,orion-gpio"; + reg = <0xd0018180 0x40>; + ngpios = <2>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <91>; + }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-db.dts b/arch/arm/boot/dts/armada-xp-db.dts index f97040d4258d97bc81bd2608d8faf320eed3e37c..b1fc728515e9c739ae272004c86a5e6ec1de393e 100644 --- a/arch/arm/boot/dts/armada-xp-db.dts +++ b/arch/arm/boot/dts/armada-xp-db.dts @@ -14,11 +14,11 @@ */ /dts-v1/; -/include/ "armada-xp.dtsi" +/include/ "armada-xp-mv78460.dtsi" / { model = "Marvell Armada XP Evaluation Board"; - compatible = "marvell,axp-db", "marvell,armadaxp", "marvell,armada-370-xp"; + compatible = "marvell,axp-db", "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; chosen { bootargs = "console=ttyS0,115200 earlyprintk"; diff --git a/arch/arm/boot/dts/armada-xp-mv78230.dtsi b/arch/arm/boot/dts/armada-xp-mv78230.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..ea355192be6f0e25968a7b05d1a42cbe4c5dacd3 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi @@ -0,0 +1,57 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada XP MV78230 SoC that are not + * common to all Armada XP SoCs. + */ + +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP MV78230 SoC"; + compatible = "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + }; + + soc { + pinctrl { + compatible = "marvell,mv78230-pinctrl"; + reg = <0xd0018000 0x38>; + }; + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; + ngpios = <17>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <20>, <21>, <22>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78260.dtsi b/arch/arm/boot/dts/armada-xp-mv78260.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..2057863f3dfa5c81e586a4fea92308ff9d3c2bca --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi @@ -0,0 +1,70 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada XP MV78260 SoC that are not + * common to all Armada XP SoCs. + */ + +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP MV78260 SoC"; + compatible = "marvell,armadaxp-mv78260", "marvell,armadaxp", "marvell,armada-370-xp"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + + soc { + pinctrl { + compatible = "marvell,mv78260-pinctrl"; + reg = <0xd0018000 0x38>; + }; + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <20>, <21>, <22>, <23>; + }; + + gpio2: gpio@d0018180 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018180 0x40>, + <0xd0018870 0x30>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <24>; + }; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-mv78460.dtsi b/arch/arm/boot/dts/armada-xp-mv78460.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..ffac98373792dd3755226ef9cd664a6dcd507175 --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi @@ -0,0 +1,70 @@ +/* + * Device Tree Include file for Marvell Armada XP family SoC + * + * Copyright (C) 2012 Marvell + * + * Thomas Petazzoni + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + * + * Contains definitions specific to the Armada XP MV78460 SoC that are not + * common to all Armada XP SoCs. + */ + +/include/ "armada-xp.dtsi" + +/ { + model = "Marvell Armada XP MV78460 SoC"; + compatible = "marvell,armadaxp-mv78460", "marvell,armadaxp", "marvell,armada-370-xp"; + + aliases { + gpio0 = &gpio0; + gpio1 = &gpio1; + gpio2 = &gpio2; + }; + + soc { + pinctrl { + compatible = "marvell,mv78460-pinctrl"; + reg = <0xd0018000 0x38>; + }; + + gpio0: gpio@d0018100 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018100 0x40>, + <0xd0018800 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <16>, <17>, <18>, <19>; + }; + + gpio1: gpio@d0018140 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018140 0x40>, + <0xd0018840 0x30>; + ngpios = <32>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <20>, <21>, <22>, <23>; + }; + + gpio2: gpio@d0018180 { + compatible = "marvell,armadaxp-gpio"; + reg = <0xd0018180 0x40>, + <0xd0018870 0x30>; + ngpios = <3>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupts-cells = <2>; + interrupts = <24>; + }; + }; + }; diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 7c95f76398de401ac166af8f32d4a34a6b918e79..d410581a5a859901b32a49a1f037356c9f22e294 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -28,6 +28,7 @@ gpio2 = &pioC; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; }; cpus { cpu@0 { @@ -202,6 +203,15 @@ status = "disabled"; }; + i2c0: i2c@fffac000 { + compatible = "atmel,at91sam9260-i2c"; + reg = <0xfffac000 0x100>; + interrupts = <11 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + adc0: adc@fffe0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffe0000 0x100>; diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 195019b7ca0e046073361a587862c885c8fbfb7e..3e6e5c1abbf37184a44237e464080a52f4312e9f 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -24,6 +24,7 @@ gpio3 = &pioD; gpio4 = &pioE; tcb0 = &tcb0; + i2c0 = &i2c0; }; cpus { cpu@0 { @@ -185,6 +186,15 @@ interrupts = <24 4 2>; status = "disabled"; }; + + i2c0: i2c@fff88000 { + compatible = "atmel,at91sam9263-i2c"; + reg = <0xfff88000 0x100>; + interrupts = <13 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9g20.dtsi b/arch/arm/boot/dts/at91sam9g20.dtsi index 2a1d1ca8bd86636426bddfb77cf2ef8610bb8b16..75ce6e760016455cd1695ab1de148eabd807ca4b 100644 --- a/arch/arm/boot/dts/at91sam9g20.dtsi +++ b/arch/arm/boot/dts/at91sam9g20.dtsi @@ -18,6 +18,10 @@ ahb { apb { + i2c0: i2c@fffac000 { + compatible = "atmel,at91sam9g20-i2c"; + }; + adc0: adc@fffe0000 { atmel,adc-startup-time = <40>; }; diff --git a/arch/arm/boot/dts/at91sam9g25ek.dts b/arch/arm/boot/dts/at91sam9g25ek.dts index 96514c134e54bafd1540c5f55524411b09f1e7a8..877c08f06763c643362eb41b8ebd058ac85abf7d 100644 --- a/arch/arm/boot/dts/at91sam9g25ek.dts +++ b/arch/arm/boot/dts/at91sam9g25ek.dts @@ -32,6 +32,18 @@ phy-mode = "rmii"; status = "okay"; }; + + i2c0: i2c@f8010000 { + status = "okay"; + }; + + i2c1: i2c@f8014000 { + status = "okay"; + }; + + i2c2: i2c@f8018000 { + status = "okay"; + }; }; usb0: ohci@00600000 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index 63751b1e744b42611f8e74d17738ccd69dd1efe1..3add030d61f8651fcf5a0476b11423897de71560 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -29,6 +29,8 @@ gpio4 = &pioE; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; + i2c1 = &i2c1; }; cpus { cpu@0 { @@ -206,6 +208,24 @@ status = "disabled"; }; + i2c0: i2c@fff84000 { + compatible = "atmel,at91sam9g10-i2c"; + reg = <0xfff84000 0x100>; + interrupts = <12 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@fff88000 { + compatible = "atmel,at91sam9g10-i2c"; + reg = <0xfff88000 0x100>; + interrupts = <13 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + adc0: adc@fffb0000 { compatible = "atmel,at91sam9260-adc"; reg = <0xfffb0000 0x100>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index a3633bd1311145168f36278afbed6dfe9e6bce76..15e1dd43f625aee627438c302e9a4a13f7002031 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -46,6 +46,14 @@ phy-mode = "rmii"; status = "okay"; }; + + i2c0: i2c@fff84000 { + status = "okay"; + }; + + i2c1: i2c@fff88000 { + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index ef9336ae9614f85ffb0ce2348b69fc06b0f756e5..82508d68aa7edb0cdc98c5245d7872d47720dfd9 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -26,6 +26,8 @@ gpio3 = &pioD; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; + i2c1 = &i2c1; }; cpus { cpu@0 { @@ -182,6 +184,24 @@ atmel,use-dma-tx; status = "disabled"; }; + + i2c0: i2c@f8010000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8010000 0x100>; + interrupts = <9 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@f8014000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8014000 0x100>; + interrupts = <10 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts index f4e43e38f3a19e202fe07d88efb227b4e1d622ef..912b2c283d6f8d34ac7ac8273b8130360547ef81 100644 --- a/arch/arm/boot/dts/at91sam9n12ek.dts +++ b/arch/arm/boot/dts/at91sam9n12ek.dts @@ -37,6 +37,14 @@ dbgu: serial@fffff200 { status = "okay"; }; + + i2c0: i2c@f8010000 { + status = "okay"; + }; + + i2c1: i2c@f8014000 { + status = "okay"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 8a387a8d61b745fc763c9e13f015896bc3e2bff7..03fc136421c5e31b01649c9caacdaf134bef4560 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -27,6 +27,9 @@ gpio3 = &pioD; tcb0 = &tcb0; tcb1 = &tcb1; + i2c0 = &i2c0; + i2c1 = &i2c1; + i2c2 = &i2c2; }; cpus { cpu@0 { @@ -196,6 +199,33 @@ status = "disabled"; }; + i2c0: i2c@f8010000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8010000 0x100>; + interrupts = <9 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@f8014000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8014000 0x100>; + interrupts = <10 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@f8018000 { + compatible = "atmel,at91sam9x5-i2c"; + reg = <0xf8018000 0x100>; + interrupts = <11 4 6>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + adc0: adc@f804c000 { compatible = "atmel,at91sam9260-adc"; reg = <0xf804c000 0x100>; diff --git a/arch/arm/boot/dts/dove-cm-a510.dts b/arch/arm/boot/dts/dove-cm-a510.dts new file mode 100644 index 0000000000000000000000000000000000000000..61a8062e56de00f741ce83582257dcb9e1f7b630 --- /dev/null +++ b/arch/arm/boot/dts/dove-cm-a510.dts @@ -0,0 +1,38 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "Compulab CM-A510"; + compatible = "compulab,cm-a510", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; +}; + +&uart0 { status = "okay"; }; +&uart1 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sdio1 { status = "okay"; }; +&sata0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Winbond W25Q32BV */ + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts new file mode 100644 index 0000000000000000000000000000000000000000..0adbd5a38095fb8340253ea351d4156d2993b0cf --- /dev/null +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -0,0 +1,42 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "SolidRun CuBox"; + compatible = "solidrun,cubox", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + leds { + compatible = "gpio-leds"; + power { + label = "Power"; + gpios = <&gpio0 18 1>; + linux,default-trigger = "default-on"; + }; + }; +}; + +&uart0 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sata0 { status = "okay"; }; +&i2c0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash Winbond W25Q32BV */ + spi-flash@0 { + compatible = "st,w25q32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; diff --git a/arch/arm/boot/dts/dove-dove-db.dts b/arch/arm/boot/dts/dove-dove-db.dts new file mode 100644 index 0000000000000000000000000000000000000000..e5a920beab450546a3231941d11c756495b1c516 --- /dev/null +++ b/arch/arm/boot/dts/dove-dove-db.dts @@ -0,0 +1,38 @@ +/dts-v1/; + +/include/ "dove.dtsi" + +/ { + model = "Marvell DB-MV88AP510-BP Development Board"; + compatible = "marvell,dove-db", "marvell,dove"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; +}; + +&uart0 { status = "okay"; }; +&uart1 { status = "okay"; }; +&sdio0 { status = "okay"; }; +&sdio1 { status = "okay"; }; +&sata0 { status = "okay"; }; + +&spi0 { + status = "okay"; + + /* spi0.0: 4M Flash ST-M25P32-VMF6P */ + spi-flash@0 { + compatible = "st,m25p32"; + spi-max-frequency = <20000000>; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..96fb824b5e6ecb3dd26481dcdbd3d67bb691772d --- /dev/null +++ b/arch/arm/boot/dts/dove.dtsi @@ -0,0 +1,143 @@ +/include/ "skeleton.dtsi" + +/ { + compatible = "marvell,dove"; + model = "Marvell Armada 88AP510 SoC"; + + interrupt-parent = <&intc>; + + intc: interrupt-controller { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xf1020204 0x04>, + <0xf1020214 0x04>; + }; + + mbus@f1000000 { + compatible = "simple-bus"; + ranges = <0 0xf1000000 0x4000000>; + #address-cells = <1>; + #size-cells = <1>; + + uart0: serial@12000 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <7>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart1: serial@12100 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <8>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart2: serial@12200 { + compatible = "ns16550a"; + reg = <0x12000 0x100>; + reg-shift = <2>; + interrupts = <9>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + uart3: serial@12300 { + compatible = "ns16550a"; + reg = <0x12100 0x100>; + reg-shift = <2>; + interrupts = <10>; + clock-frequency = <166666667>; + status = "disabled"; + }; + + wdt: wdt@20300 { + compatible = "marvell,orion-wdt"; + reg = <0x20300 0x28>; + }; + + gpio0: gpio@d0400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0400 0x20>; + ngpio = <32>; + interrupts = <12>, <13>, <14>, <60>; + }; + + gpio1: gpio@d0420 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0420 0x20>; + ngpio = <32>; + interrupts = <61>; + }; + + gpio2: gpio@e8400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xe8400 0x0c>; + ngpio = <8>; + }; + + spi0: spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <6>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + spi1: spi@14600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <5>; + reg = <0x14600 0x28>; + status = "disabled"; + }; + + i2c0: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11>; + clock-frequency = <400000>; + timeout-ms = <1000>; + status = "disabled"; + }; + + sdio0: sdio@92000 { + compatible = "marvell,dove-sdhci"; + reg = <0x92000 0x100>; + interrupts = <35>, <37>; + status = "disabled"; + }; + + sdio1: sdio@90000 { + compatible = "marvell,dove-sdhci"; + reg = <0x90000 0x100>; + interrupts = <36>, <38>; + status = "disabled"; + }; + + sata0: sata@a0000 { + compatible = "marvell,orion-sata"; + reg = <0xa0000 0x2400>; + interrupts = <62>; + nr-ports = <1>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/highbank.dts b/arch/arm/boot/dts/highbank.dts index 9fecf1ae777bac14b2770c0cf09dd601e85b73b8..0c6fc34821f93f336fd705626c35da8b9cbba9f3 100644 --- a/arch/arm/boot/dts/highbank.dts +++ b/arch/arm/boot/dts/highbank.dts @@ -121,6 +121,10 @@ compatible = "calxeda,hb-ahci"; reg = <0xffe08000 0x10000>; interrupts = <0 83 4>; + calxeda,port-phys = <&combophy5 0 &combophy0 0 + &combophy0 1 &combophy0 2 + &combophy0 3>; + dma-coherent; }; sdhci@ffe0e000 { @@ -306,5 +310,19 @@ reg = <0xfff51000 0x1000>; interrupts = <0 80 4 0 81 4 0 82 4>; }; + + combophy0: combo-phy@fff58000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff58000 0x1000>; + phydev = <5>; + }; + + combophy5: combo-phy@fff5d000 { + compatible = "calxeda,hb-combophy"; + #phy-cells = <1>; + reg = <0xfff5d000 0x1000>; + phydev = <31>; + }; }; }; diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi index 59fbfba23df8b237c6e775ef109106227a802903..e16d631554802f73227de6bcab58368d9e049227 100644 --- a/arch/arm/boot/dts/imx28.dtsi +++ b/arch/arm/boot/dts/imx28.dtsi @@ -764,6 +764,7 @@ reg = <0x80058000 0x2000>; interrupts = <111 68>; clock-frequency = <100000>; + fsl,i2c-dma-channel = <6>; status = "disabled"; }; @@ -774,6 +775,7 @@ reg = <0x8005a000 0x2000>; interrupts = <110 69>; clock-frequency = <100000>; + fsl,i2c-dma-channel = <7>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 2f71a91ca98e856263677bfd8c11ead4aafb1703..75d069fcf8979d9684d2c979badaacdb3d3a7876 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -407,6 +407,13 @@ status = "disabled"; }; + nand@83fdb000 { + compatible = "fsl,imx51-nand"; + reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; + interrupts = <8>; + status = "disabled"; + }; + ssi3: ssi@83fe8000 { compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fe8000 0x4000>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 221cf3321b0ade6ba6ee50df67d20a3a0510b74c..76ebb1ad2675334d38674fda586c9dee87d0cef8 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -518,6 +518,13 @@ status = "disabled"; }; + nand@63fdb000 { + compatible = "fsl,imx53-nand"; + reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>; + interrupts = <8>; + status = "disabled"; + }; + ssi3: ssi@63fe8000 { compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; reg = <0x63fe8000 0x4000>; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index 35e5895ba3df31856c73193a6bf79f791d54f985..f3990b04fecf4661216c9cf321dc817c72e1a0b7 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -400,8 +400,8 @@ #clock-cells = <1>; }; - anatop@020c8000 { - compatible = "fsl,imx6q-anatop"; + anatop: anatop@020c8000 { + compatible = "fsl,imx6q-anatop", "syscon", "simple-bus"; reg = <0x020c8000 0x1000>; interrupts = <0 49 0x04 0 54 0x04 0 127 0x04>; @@ -531,6 +531,11 @@ interrupts = <0 89 0x04 0 90 0x04>; }; + gpr: iomuxc-gpr@020e0000 { + compatible = "fsl,imx6q-iomuxc-gpr", "syscon"; + reg = <0x020e0000 0x38>; + }; + iomuxc@020e0000 { compatible = "fsl,imx6q-iomuxc"; reg = <0x020e0000 0x4000>; diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi new file mode 100644 index 0000000000000000000000000000000000000000..813b91d7bea25f58288e1a5dc783734af0789f2c --- /dev/null +++ b/arch/arm/boot/dts/integrator.dtsi @@ -0,0 +1,76 @@ +/* + * SoC core Device Tree for the ARM Integrator platforms + */ + +/include/ "skeleton.dtsi" + +/ { + timer@13000000 { + reg = <0x13000000 0x100>; + interrupt-parent = <&pic>; + interrupts = <5>; + }; + + timer@13000100 { + reg = <0x13000100 0x100>; + interrupt-parent = <&pic>; + interrupts = <6>; + }; + + timer@13000200 { + reg = <0x13000200 0x100>; + interrupt-parent = <&pic>; + interrupts = <7>; + }; + + pic@14000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x14000000 0x100>; + clear-mask = <0xffffffff>; + }; + + flash@24000000 { + compatible = "cfi-flash"; + reg = <0x24000000 0x02000000>; + }; + + fpga { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&pic>; + + /* + * These PrimeCells are in the same locations and using the + * same interrupts in all Integrators, however the silicon + * version deployed is different. + */ + rtc@15000000 { + reg = <0x15000000 0x1000>; + interrupts = <8>; + }; + + uart@16000000 { + reg = <0x16000000 0x1000>; + interrupts = <1>; + }; + + uart@17000000 { + reg = <0x17000000 0x1000>; + interrupts = <2>; + }; + + kmi@18000000 { + reg = <0x18000000 0x1000>; + interrupts = <3>; + }; + + kmi@19000000 { + reg = <0x19000000 0x1000>; + interrupts = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts new file mode 100644 index 0000000000000000000000000000000000000000..61767757b50a6fa60c399901a4fc7e1c0f0ebf2a --- /dev/null +++ b/arch/arm/boot/dts/integratorap.dts @@ -0,0 +1,68 @@ +/* + * Device Tree for the ARM Integrator/AP platform + */ + +/dts-v1/; +/include/ "integrator.dtsi" + +/ { + model = "ARM Integrator/AP"; + compatible = "arm,integrator-ap"; + + aliases { + arm,timer-primary = &timer2; + arm,timer-secondary = &timer1; + }; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk"; + }; + + timer0: timer@13000000 { + compatible = "arm,integrator-timer"; + }; + + timer1: timer@13000100 { + compatible = "arm,integrator-timer"; + }; + + timer2: timer@13000200 { + compatible = "arm,integrator-timer"; + }; + + pic: pic@14000000 { + valid-mask = <0x003fffff>; + }; + + fpga { + /* + * The Integator/AP predates the idea to have magic numbers + * identifying the PrimeCell in hardware, thus we have to + * supply these from the device tree. + */ + rtc: rtc@15000000 { + compatible = "arm,pl030", "arm,primecell"; + arm,primecell-periphid = <0x00041030>; + }; + + uart0: uart@16000000 { + compatible = "arm,pl010", "arm,primecell"; + arm,primecell-periphid = <0x00041010>; + }; + + uart1: uart@17000000 { + compatible = "arm,pl010", "arm,primecell"; + arm,primecell-periphid = <0x00041010>; + }; + + kmi0: kmi@18000000 { + compatible = "arm,pl050", "arm,primecell"; + arm,primecell-periphid = <0x00041050>; + }; + + kmi1: kmi@19000000 { + compatible = "arm,pl050", "arm,primecell"; + arm,primecell-periphid = <0x00041050>; + }; + }; +}; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts new file mode 100644 index 0000000000000000000000000000000000000000..2dd5e4e48481bf386ee42691bce1ebe4d679aff4 --- /dev/null +++ b/arch/arm/boot/dts/integratorcp.dts @@ -0,0 +1,110 @@ +/* + * Device Tree for the ARM Integrator/CP platform + */ + +/dts-v1/; +/include/ "integrator.dtsi" + +/ { + model = "ARM Integrator/CP"; + compatible = "arm,integrator-cp"; + + aliases { + arm,timer-primary = &timer2; + arm,timer-secondary = &timer1; + }; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk"; + }; + + timer0: timer@13000000 { + compatible = "arm,sp804", "arm,primecell"; + }; + + timer1: timer@13000100 { + compatible = "arm,sp804", "arm,primecell"; + }; + + timer2: timer@13000200 { + compatible = "arm,sp804", "arm,primecell"; + }; + + pic: pic@14000000 { + valid-mask = <0x1fc003ff>; + }; + + cic: cic@10000040 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x10000040 0x100>; + clear-mask = <0xffffffff>; + valid-mask = <0x00000007>; + }; + + sic: sic@ca000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0xca000000 0x100>; + clear-mask = <0x00000fff>; + valid-mask = <0x00000fff>; + }; + + ethernet@c8000000 { + compatible = "smsc,lan91c111"; + reg = <0xc8000000 0x10>; + interrupt-parent = <&pic>; + interrupts = <27>; + }; + + fpga { + /* + * These PrimeCells are at the same location and using + * the same interrupts in all Integrators, but in the CP + * slightly newer versions are deployed. + */ + rtc@15000000 { + compatible = "arm,pl031", "arm,primecell"; + }; + + uart@16000000 { + compatible = "arm,pl011", "arm,primecell"; + }; + + uart@17000000 { + compatible = "arm,pl011", "arm,primecell"; + }; + + kmi@18000000 { + compatible = "arm,pl050", "arm,primecell"; + }; + + kmi@19000000 { + compatible = "arm,pl050", "arm,primecell"; + }; + + /* + * These PrimeCells are only available on the Integrator/CP + */ + mmc@1c000000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x1c000000 0x1000>; + interrupts = <23 24>; + max-frequency = <515633>; + }; + + aaci@1d000000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x1d000000 0x1000>; + interrupts = <25>; + }; + + clcd@c0000000 { + compatible = "arm,pl110", "arm,primecell"; + reg = <0xC0000000 0x1000>; + interrupts = <22>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index 7408655f91b500cc5f4a4fc283c6bb30c7c43eac..9b32d0272825fcb172c0ef720c30f74c4202e0f5 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -25,6 +25,16 @@ }; }; + gpio_fan { + /* Fan: ADDA AD045HB-G73 40mm 6000rpm@5v */ + compatible = "gpio-fan"; + gpios = <&gpio1 14 1 + &gpio1 13 1>; + gpio-fan,speed-map = <0 0 + 3000 1 + 6000 2>; + }; + ocp@f1000000 { sata@80000 { status = "okay"; diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts new file mode 100644 index 0000000000000000000000000000000000000000..08a582414b88272f04e94207b0ad3463bb4fbff6 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -0,0 +1,57 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Seagate FreeAgent Dockstar"; + compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/sda1 rootdelay=10"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x0100000 0x400000>; + }; + + partition@500000 { + label = "data"; + reg = <0x0500000 0xfb00000>; + }; + }; + }; + gpio-leds { + compatible = "gpio-leds"; + + health { + label = "status:green:health"; + gpios = <&gpio1 14 1>; + linux,default-trigger = "default-on"; + }; + fault { + label = "status:orange:fault"; + gpios = <&gpio1 15 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index f8ca6fa88192a5d36edb0c484a7a13c7c11e6e7c..d97cd9d4753e298689f3e9331eb7945569b416cd 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -12,7 +12,7 @@ }; chosen { - bootargs = "console=ttyS0,115200n8 earlyprintk mtdparts=orion_nand:0xc0000@0x0(uboot),0x20000@0xa0000(env),0x300000@0x100000(zImage),0x300000@0x540000(initrd),0x1f400000@0x980000(boot)"; + bootargs = "console=ttyS0,115200n8 earlyprintk"; linux,initrd-start = <0x4500040>; linux,initrd-end = <0x4800000>; }; @@ -30,7 +30,37 @@ clock-frequency = <200000000>; status = "ok"; }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "uboot"; + reg = <0x0000000 0xc0000>; + }; + + partition@a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + }; + + partition@100000 { + label = "zImage"; + reg = <0x100000 0x300000>; + }; + + partition@540000 { + label = "initrd"; + reg = <0x540000 0x300000>; + }; + + partition@980000 { + label = "boot"; + reg = <0x980000 0x1f400000>; + }; + }; }; + gpio-leds { compatible = "gpio-leds"; @@ -69,4 +99,22 @@ gpios = <&gpio1 16 0>; }; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + button@1 { + label = "OTB Button"; + linux,code = <133>; + gpios = <&gpio1 3 1>; + debounce-interval = <100>; + }; + button@2 { + label = "Reset"; + linux,code = <0x198>; + gpios = <&gpio0 12 1>; + debounce-interval = <100>; + }; + }; }; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts new file mode 100644 index 0000000000000000000000000000000000000000..865aeec40a268da8f2a0b2ab3416ccbad4da90f5 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -0,0 +1,105 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Iomega StorCenter ix2-200"; + compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + i2c@11000 { + status = "okay"; + + lm63: lm63@4c { + compatible = "national,lm63"; + reg = <0x4c>; + }; + }; + + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x100000>; + read-only; + }; + + partition@a0000 { + label = "env"; + reg = <0xa0000 0x20000>; + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x300000>; + }; + + partition@400000 { + label = "uInitrd"; + reg = <0x540000 0x1000000>; + }; + }; + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + gpio-leds { + compatible = "gpio-leds"; + + power_led { + label = "status:white:power_led"; + gpios = <&gpio0 16 0>; + linux,default-trigger = "default-on"; + }; + health_led1 { + label = "status:red:health_led"; + gpios = <&gpio1 5 0>; + }; + health_led2 { + label = "status:white:health_led"; + gpios = <&gpio1 4 0>; + }; + backup_led { + label = "status:blue:backup_led"; + gpios = <&gpio0 15 0>; + }; + }; + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + Power { + label = "Power Button"; + linux,code = <116>; + gpios = <&gpio0 14 1>; + }; + Reset { + label = "Reset Button"; + linux,code = <0x198>; + gpios = <&gpio0 12 1>; + }; + OTB { + label = "OTB Button"; + linux,code = <133>; + gpios = <&gpio1 3 1>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts new file mode 100644 index 0000000000000000000000000000000000000000..75bdb93fed26a9b4d2843d4a230a5389d2f0af46 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -0,0 +1,29 @@ +/dts-v1/; + +/include/ "kirkwood.dtsi" + +/ { + model = "Keymile Kirkwood Reference Design"; + compatible = "keymile,km_kirkwood", "marvell,kirkwood-98DX4122", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + ocp@f1000000 { + serial@12000 { + clock-frequency = <200000000>; + status = "ok"; + }; + + nand@3000000 { + status = "ok"; + chip-delay = <25>; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index cef9616f330aa06fc75769a79fbcf62211b3fea7..4e5b8154a5be5d95535cd5eb9d66f894670c0946 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -14,7 +14,8 @@ ocp@f1000000 { compatible = "simple-bus"; - ranges = <0 0xf1000000 0x4000000>; + ranges = <0x00000000 0xf1000000 0x4000000 + 0xf5000000 0xf5000000 0x0000400>; #address-cells = <1>; #size-cells = <1>; @@ -105,5 +106,14 @@ clock-frequency = <100000>; status = "disabled"; }; + + crypto@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0xf5000000 0x800>; + reg-names = "regs", "sram"; + interrupts = <22>; + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts index 20b966ee1bb3cfd7addfbb4d07fb0391bc41dc42..e8f927cbb376b37ed3d30465cad847a57d9f8ce6 100644 --- a/arch/arm/boot/dts/omap4-panda.dts +++ b/arch/arm/boot/dts/omap4-panda.dts @@ -59,6 +59,41 @@ }; }; +&omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins + &mcbsp1_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ + 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ + 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ + 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ + 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ + 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ + 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ + 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ + 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ + >; + }; +}; + &i2c1 { clock-frequency = <400000>; @@ -137,3 +172,15 @@ cs1-used; device-handle = <&elpida_ECB240ABACN>; }; + +&mcbsp2 { + status = "disabled"; +}; + +&mcbsp3 { + status = "disabled"; +}; + +&dmic { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts index 94a23b39033ddcd9458b631ae894926ca420b422..5b7e04fbff500cf28b3338552b396745b30cac68 100644 --- a/arch/arm/boot/dts/omap4-sdp.dts +++ b/arch/arm/boot/dts/omap4-sdp.dts @@ -117,6 +117,15 @@ }; &omap4_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins + &dmic_pins + &mcbsp1_pins + &mcbsp2_pins + >; + uart2_pins: pinmux_uart2_pins { pinctrl-single,pins = < 0xd8 0x118 /* uart2_cts.uart2_cts INPUT_PULLUP | MODE0 */ @@ -141,6 +150,50 @@ 0x11e 0 /* uart4_tx.uart4_tx OUTPUT | MODE0 */ >; }; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0xe0 0x3 /* hdq_sio.gpio_127 OUTPUT | MODE3 */ + 0x160 0x100 /* sys_nirq2.sys_nirq2 INPUT | MODE0 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0xc6 0x108 /* abe_pdm_ul_data.abe_pdm_ul_data INPUT PULLDOWN | MODE0 */ + 0xc8 0x108 /* abe_pdm_dl_data.abe_pdm_dl_data INPUT PULLDOWN | MODE0 */ + 0xca 0x118 /* abe_pdm_frame.abe_pdm_frame INPUT PULLUP | MODE0 */ + 0xcc 0x108 /* abe_pdm_lb_clk.abe_pdm_lb_clk INPUT PULLDOWN | MODE0 */ + 0xce 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + >; + }; + + dmic_pins: pinmux_dmic_pins { + pinctrl-single,pins = < + 0xd0 0 /* abe_dmic_clk1.abe_dmic_clk1 OUTPUT | MODE0 */ + 0xd2 0x100 /* abe_dmic_din1.abe_dmic_din1 INPUT | MODE0 */ + 0xd4 0x100 /* abe_dmic_din2.abe_dmic_din2 INPUT | MODE0 */ + 0xd6 0x100 /* abe_dmic_din3.abe_dmic_din3 INPUT | MODE0 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0xbe 0x100 /* abe_mcbsp1_clkx.abe_mcbsp1_clkx INPUT | MODE0 */ + 0xc0 0x108 /* abe_mcbsp1_dr.abe_mcbsp1_dr INPUT PULLDOWN | MODE0 */ + 0xc2 0x8 /* abe_mcbsp1_dx.abe_mcbsp1_dx OUTPUT PULLDOWN | MODE0 */ + 0xc4 0x100 /* abe_mcbsp1_fsx.abe_mcbsp1_fsx INPUT | MODE0 */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + 0xb6 0x100 /* abe_mcbsp2_clkx.abe_mcbsp2_clkx INPUT | MODE0 */ + 0xb8 0x108 /* abe_mcbsp2_dr.abe_mcbsp2_dr INPUT PULLDOWN | MODE0 */ + 0xba 0x8 /* abe_mcbsp2_dx.abe_mcbsp2_dx OUTPUT PULLDOWN | MODE0 */ + 0xbc 0x100 /* abe_mcbsp2_fsx.abe_mcbsp2_fsx INPUT | MODE0 */ + >; + }; }; &i2c1 { @@ -349,3 +402,7 @@ pinctrl-names = "default"; pinctrl-0 = <&uart4_pins>; }; + +&mcbsp3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap5-evm.dts b/arch/arm/boot/dts/omap5-evm.dts index 9c41a3f311aab25bd5e098d15c8f4cb5d5ee3695..c663eba73168adb8eb27edd7e15147440fae1af6 100644 --- a/arch/arm/boot/dts/omap5-evm.dts +++ b/arch/arm/boot/dts/omap5-evm.dts @@ -27,6 +27,60 @@ }; +&omap5_pmx_core { + pinctrl-names = "default"; + pinctrl-0 = < + &twl6040_pins + &mcpdm_pins + &dmic_pins + &mcbsp1_pins + &mcbsp2_pins + >; + + twl6040_pins: pinmux_twl6040_pins { + pinctrl-single,pins = < + 0x18a 0x6 /* perslimbus2_clock.gpio5_145 OUTPUT | MODE6 */ + >; + }; + + mcpdm_pins: pinmux_mcpdm_pins { + pinctrl-single,pins = < + 0x142 0x108 /* abe_clks.abe_clks INPUT PULLDOWN | MODE0 */ + 0x15c 0x108 /* abemcpdm_ul_data.abemcpdm_ul_data INPUT PULLDOWN | MODE0 */ + 0x15e 0x108 /* abemcpdm_dl_data.abemcpdm_dl_data INPUT PULLDOWN | MODE0 */ + 0x160 0x118 /* abemcpdm_frame.abemcpdm_frame INPUT PULLUP | MODE0 */ + 0x162 0x108 /* abemcpdm_lb_clk.abemcpdm_lb_clk INPUT PULLDOWN | MODE0 */ + >; + }; + + dmic_pins: pinmux_dmic_pins { + pinctrl-single,pins = < + 0x144 0x100 /* abedmic_din1.abedmic_din1 INPUT | MODE0 */ + 0x146 0x100 /* abedmic_din2.abedmic_din2 INPUT | MODE0 */ + 0x148 0x100 /* abedmic_din3.abedmic_din3 INPUT | MODE0 */ + 0x14a 0 /* abedmic_clk1.abedmic_clk1 OUTPUT | MODE0 */ + >; + }; + + mcbsp1_pins: pinmux_mcbsp1_pins { + pinctrl-single,pins = < + 0x14c 0x101 /* abedmic_clk2.abemcbsp1_fsx INPUT | MODE1 */ + 0x14e 0x9 /* abedmic_clk3.abemcbsp1_dx OUTPUT PULLDOWN | MODE1 */ + 0x150 0x101 /* abeslimbus1_clock.abemcbsp1_clkx INPUT | MODE0 */ + 0x152 0x109 /* abeslimbus1_data.abemcbsp1_dr INPUT PULLDOWN | MODE1 */ + >; + }; + + mcbsp2_pins: pinmux_mcbsp2_pins { + pinctrl-single,pins = < + 0x154 0x108 /* abemcbsp2_dr.abemcbsp2_dr INPUT PULLDOWN | MODE0 */ + 0x156 0x8 /* abemcbsp2_dx.abemcbsp2_dx OUTPUT PULLDOWN | MODE0 */ + 0x158 0x100 /* abemcbsp2_fsx.abemcbsp2_fsx INPUT | MODE0 */ + 0x15a 0x100 /* abemcbsp2_clkx.abemcbsp2_clkx INPUT | MODE0 */ + >; + }; +}; + &mmc1 { vmmc-supply = <&vmmcsd_fixed>; bus-width = <4>; @@ -82,3 +136,7 @@ 0x020700d9>; /* SEARCH */ linux,input-no-autorepeat; }; + +&mcbsp3 { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi index 5db33f481a331c29fb344ab304d0d6e0030c2686..42c78beb4fdc84c03c785bf50ac938d5d15063d1 100644 --- a/arch/arm/boot/dts/omap5.dtsi +++ b/arch/arm/boot/dts/omap5.dtsi @@ -77,6 +77,23 @@ ranges; ti,hwmods = "l3_main_1", "l3_main_2", "l3_main_3"; + omap5_pmx_core: pinmux@4a002840 { + compatible = "ti,omap4-padconf", "pinctrl-single"; + reg = <0x4a002840 0x01b6>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + omap5_pmx_wkup: pinmux@4ae0c840 { + compatible = "ti,omap4-padconf", "pinctrl-single"; + reg = <0x4ae0c840 0x0038>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-single,register-width = <16>; + pinctrl-single,function-mask = <0x7fff>; + }; + gic: interrupt-controller@48211000 { compatible = "arm,cortex-a15-gic"; interrupt-controller; diff --git a/arch/arm/boot/dts/pxa910-dkb.dts b/arch/arm/boot/dts/pxa910-dkb.dts index e92be5a474e76f9bff3bb98e93682bc0c431a7d1..595492aa505372047aab605aff58b043f16896f6 100644 --- a/arch/arm/boot/dts/pxa910-dkb.dts +++ b/arch/arm/boot/dts/pxa910-dkb.dts @@ -29,6 +29,143 @@ }; twsi1: i2c@d4011000 { status = "okay"; + + pmic: 88pm860x@34 { + compatible = "marvell,88pm860x"; + reg = <0x34>; + interrupts = <4>; + interrupt-parent = <&intc>; + interrupt-controller; + #interrupt-cells = <1>; + + marvell,88pm860x-irq-read-clr; + marvell,88pm860x-slave-addr = <0x11>; + + regulators { + BUCK1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK2 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + BUCK3 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + LDO1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + regulator-always-on; + }; + LDO2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO5 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2900000>; + regulator-boot-on; + regulator-always-on; + }; + LDO9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO10 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + LDO12 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO13 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + LDO14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + rtc { + marvell,88pm860x-vrtc = <1>; + }; + touch { + marvell,88pm860x-gpadc-prebias = <1>; + marvell,88pm860x-gpadc-slot-cycle = <1>; + marvell,88pm860x-tsi-prebias = <6>; + marvell,88pm860x-pen-prebias = <16>; + marvell,88pm860x-pen-prechg = <2>; + marvell,88pm860x-resistor-X = <300>; + }; + backlights { + backlight-0 { + marvell,88pm860x-iset = <4>; + marvell,88pm860x-pwm = <3>; + }; + backlight-2 { + }; + }; + leds { + led0-red { + marvell,88pm860x-iset = <12>; + }; + led0-green { + marvell,88pm860x-iset = <12>; + }; + led0-blue { + marvell,88pm860x-iset = <12>; + }; + }; + }; }; rtc: rtc@d4010000 { status = "okay"; diff --git a/arch/arm/boot/dts/pxa910.dtsi b/arch/arm/boot/dts/pxa910.dtsi index a3be44d86bcd5a3f9bd4938364bb76cedf85c5ac..825aaca33034d9f23e63ade23bd611a38c3a6f9d 100644 --- a/arch/arm/boot/dts/pxa910.dtsi +++ b/arch/arm/boot/dts/pxa910.dtsi @@ -120,6 +120,8 @@ twsi1: i2c@d4011000 { compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xd4011000 0x1000>; interrupts = <7>; mrvl,i2c-fast-mode; @@ -128,6 +130,8 @@ twsi2: i2c@d4037000 { compatible = "mrvl,mmp-twsi"; + #address-cells = <1>; + #size-cells = <0>; reg = <0xd4037000 0x1000>; interrupts = <54>; status = "disabled"; diff --git a/arch/arm/boot/dts/spear300-evb.dts b/arch/arm/boot/dts/spear300-evb.dts index d71b8d581e3d39f77ea8d783303b9eb8a2388030..1e7c7a8e2123f63b3f671d4f5fcb8bd2fe1f8dd1 100644 --- a/arch/arm/boot/dts/spear300-evb.dts +++ b/arch/arm/boot/dts/spear300-evb.dts @@ -80,8 +80,7 @@ }; sdhci@70000000 { - int-gpio = <&gpio1 0 0>; - power-gpio = <&gpio1 2 1>; + cd-gpios = <&gpio1 0 0>; status = "okay"; }; diff --git a/arch/arm/boot/dts/spear320-evb.dts b/arch/arm/boot/dts/spear320-evb.dts index e4e912f9502466da3ab44a26eda9f8c83e383d8e..082328bd64abd1e09591b1555b7b130c35dd06a6 100644 --- a/arch/arm/boot/dts/spear320-evb.dts +++ b/arch/arm/boot/dts/spear320-evb.dts @@ -103,8 +103,6 @@ }; sdhci@70000000 { - power-gpio = <&gpio0 2 1>; - power_always_enb; status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index e60dc7124e9271b41c7fa27734cee825a3805365..f0ba901676ac640ddf5488ba51eb59d5ce38fd58 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -539,7 +539,7 @@ nvidia,invert-interrupt; }; - memory-controller@0x7000f400 { + memory-controller@7000f400 { emc-table@190000 { reg = <190000>; compatible = "nvidia,tegra20-emc-table"; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 67a6cd910b9612d0a3aa7d206f1570a709a1226e..f3a09d0d45bc801a012fe7ea97f73548384ae9ad 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -170,7 +170,7 @@ reg = <0x7000e400 0x400>; }; - memory-controller@0x7000f000 { + memory-controller@7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; @@ -183,7 +183,7 @@ 0x58000000 0x02000000>; /* GART aperture */ }; - memory-controller@0x7000f400 { + memory-controller@7000f400 { compatible = "nvidia,tegra20-emc"; reg = <0x7000f400 0x200>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/xenvm-4.2.dts b/arch/arm/boot/dts/xenvm-4.2.dts new file mode 100644 index 0000000000000000000000000000000000000000..ec3f9528e180c75e42b633104fb537ced0762691 --- /dev/null +++ b/arch/arm/boot/dts/xenvm-4.2.dts @@ -0,0 +1,68 @@ +/* + * Xen Virtual Machine for unprivileged guests + * + * Based on ARM Ltd. Versatile Express CoreTile Express (single CPU) + * Cortex-A15 MPCore (V2P-CA15) + * + */ + +/dts-v1/; + +/ { + model = "XENVM-4.2"; + compatible = "xen,xenvm-4.2", "xen,xenvm"; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + chosen { + /* this field is going to be adjusted by the hypervisor */ + bootargs = "console=hvc0 root=/dev/xvda"; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a15"; + reg = <0>; + }; + }; + + memory@80000000 { + device_type = "memory"; + /* this field is going to be adjusted by the hypervisor */ + reg = <0 0x80000000 0 0x08000000>; + }; + + gic: interrupt-controller@2c001000 { + compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + #address-cells = <0>; + interrupt-controller; + reg = <0 0x2c001000 0 0x1000>, + <0 0x2c002000 0 0x100>; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <1 13 0xf08>, + <1 14 0xf08>, + <1 11 0xf08>, + <1 10 0xf08>; + }; + + hypervisor { + compatible = "xen,xen-4.2", "xen,xen"; + /* this field is going to be adjusted by the hypervisor */ + reg = <0 0xb0000000 0 0x20000>; + /* this field is going to be adjusted by the hypervisor */ + interrupts = <1 15 0xf08>; + }; + + motherboard { + arm,v2m-memory-map = "rs1"; + }; +}; diff --git a/arch/arm/common/Kconfig b/arch/arm/common/Kconfig index 283fa1d804f4d34208e544f5c3064a72457afc52..45ceeb0e93e05faaa40195a30d82045f7b6aabe0 100644 --- a/arch/arm/common/Kconfig +++ b/arch/arm/common/Kconfig @@ -1,15 +1,15 @@ config ARM_GIC + bool select IRQ_DOMAIN select MULTI_IRQ_HANDLER - bool config GIC_NON_BANKED bool config ARM_VIC + bool select IRQ_DOMAIN select MULTI_IRQ_HANDLER - bool config ARM_VIC_NR int diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index c4110d1b1f2db2e26ce32585a6a5c1e599550689..001f4913799c5a6c0d59159d4cc619456061f235 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -284,11 +284,17 @@ int dma_set_coherent_mask(struct device *dev, u64 mask) int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) { - it8152_io.start = IT8152_IO_BASE + 0x12000; - it8152_io.end = IT8152_IO_BASE + 0x12000 + 0x100000; + /* + * FIXME: use pci_ioremap_io to remap the IO space here and + * move over to the generic io.h implementation. + * This requires solving the same problem for PXA PCMCIA + * support. + */ + it8152_io.start = (unsigned long)IT8152_IO_BASE + 0x12000; + it8152_io.end = (unsigned long)IT8152_IO_BASE + 0x12000 + 0x100000; sys->mem_offset = 0x10000000; - sys->io_offset = IT8152_IO_BASE; + sys->io_offset = (unsigned long)IT8152_IO_BASE; if (request_resource(&ioport_resource, &it8152_io)) { printk(KERN_ERR "PCI: unable to allocate IO region\n"); diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig index cedc92ef88ab48e31b9901d964fd4071b8468501..14579711d8fc4482bfe058bfbe967cd8bb96f45a 100644 --- a/arch/arm/configs/cam60_defconfig +++ b/arch/arm/configs/cam60_defconfig @@ -49,7 +49,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PLATRAM=m CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_ATMEL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index e53c47563845e641c49d3081ec3dfa164c617c54..4b8a25d9e6867b9baf1fb15037de71f2a760d4e2 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -97,7 +97,6 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_ROM=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_SHARPSL=y CONFIG_BLK_DEV_LOOP=y CONFIG_IDE=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 8e97b2f7ceec571dbcf494b42cf22d526ecbcef8..806005a4c4c15cdeac19cbc6802494df0ff4e982 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -61,7 +61,6 @@ CONFIG_MTD_CFI_STAA=y CONFIG_MTD_ROM=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_BLK_DEV_NBD=y CONFIG_EEPROM_LEGACY=y CONFIG_SCSI=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 565132d02105c7566f76800558d9008b46182b8d..66aa7a6db884c14668be9f20a6d27166c85a8c1f 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -40,7 +40,6 @@ CONFIG_VMSPLIT_2G=y CONFIG_PREEMPT_VOLUNTARY=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set -CONFIG_DEFAULT_MMAP_MIN_ADDR=32768 CONFIG_CMDLINE="noinitrd console=ttymxc0,115200" CONFIG_VFP=y CONFIG_NEON=y @@ -177,6 +176,9 @@ CONFIG_SND_SOC_IMX_MC13783=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_MXC=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_MXS_PHY=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_SDHCI=y diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index aeb3af541fedc8bf1b31f25a712426bb38ed5af8..74eee0c78f283dddb7ef36e37d95baf849860870 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,5 +1,7 @@ CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_LOG_BUF_SHIFT=19 CONFIG_PROFILING=y CONFIG_OPROFILE=y @@ -15,9 +17,19 @@ CONFIG_MACH_MV88F6281GTW_GE=y CONFIG_MACH_SHEEVAPLUG=y CONFIG_MACH_ESATA_SHEEVAPLUG=y CONFIG_MACH_GURUPLUG=y -CONFIG_MACH_DOCKSTAR=y +CONFIG_MACH_DREAMPLUG_DT=y +CONFIG_MACH_ICONNECT_DT=y +CONFIG_MACH_DLINK_KIRKWOOD_DT=y +CONFIG_MACH_IB62X0_DT=y +CONFIG_MACH_TS219_DT=y +CONFIG_MACH_DOCKSTAR_DT=y +CONFIG_MACH_GOFLEXNET_DT=y +CONFIG_MACH_LSXL_DT=y +CONFIG_MACH_IOMEGA_IX2_200_DT=y +CONFIG_MACH_KM_KIRKWOOD_DT=y CONFIG_MACH_TS219=y CONFIG_MACH_TS41X=y +CONFIG_MACH_DOCKSTAR=y CONFIG_MACH_OPENRD_BASE=y CONFIG_MACH_OPENRD_CLIENT=y CONFIG_MACH_OPENRD_ULTIMATE=y @@ -29,8 +41,6 @@ CONFIG_MACH_NET2BIG_V2=y CONFIG_MACH_NET5BIG_V2=y CONFIG_MACH_T5325=y # CONFIG_CPU_FEROCEON_OLD_ID is not set -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y CONFIG_PREEMPT=y CONFIG_AEABI=y # CONFIG_OABI_COMPAT is not set @@ -47,13 +57,11 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_IPV6 is not set CONFIG_NET_DSA=y -CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_NET_PKTGEN=m CONFIG_CFG80211=y CONFIG_MAC80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_MTD=y -CONFIG_MTD_PARTITIONS=y CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y @@ -69,7 +77,6 @@ CONFIG_MTD_M25P80=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ORION=y CONFIG_BLK_DEV_LOOP=y -# CONFIG_MISC_DEVICES is not set # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=m @@ -78,22 +85,21 @@ CONFIG_ATA=y CONFIG_SATA_AHCI=y CONFIG_SATA_MV=y CONFIG_NETDEVICES=y -CONFIG_MARVELL_PHY=y -CONFIG_NET_ETHERNET=y CONFIG_MII=y -CONFIG_NET_PCI=y +CONFIG_NET_DSA_MV88E6123_61_65=y CONFIG_MV643XX_ETH=y -# CONFIG_NETDEV_10000 is not set +CONFIG_MARVELL_PHY=y CONFIG_LIBERTAS=y CONFIG_LIBERTAS_SDIO=y CONFIG_INPUT_EVDEV=y CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set +CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_DEVKMEM is not set CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_RUNTIME_UARTS=2 -CONFIG_LEGACY_PTY_COUNT=16 +CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_HW_RANDOM is not set CONFIG_I2C=y # CONFIG_I2C_COMPAT is not set @@ -103,7 +109,8 @@ CONFIG_SPI=y CONFIG_SPI_ORION=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set -# CONFIG_VGA_CONSOLE is not set +CONFIG_WATCHDOG=y +CONFIG_ORION_WATCHDOG=y CONFIG_HID_DRAGONRISE=y CONFIG_HID_GYRATION=y CONFIG_HID_TWINHAN=y @@ -119,10 +126,8 @@ CONFIG_HID_TOPSEED=y CONFIG_HID_THRUSTMASTER=y CONFIG_HID_ZEROPLUS=y CONFIG_USB=y -CONFIG_USB_DEVICEFS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_PRINTER=m CONFIG_USB_STORAGE=y CONFIG_USB_STORAGE_DATAFAB=y @@ -148,7 +153,6 @@ CONFIG_MV_XOR=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set -CONFIG_INOTIFY=y CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_UDF_FS=m @@ -158,7 +162,6 @@ CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y CONFIG_NFS_FS=y -CONFIG_NFS_V3=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_CODEPAGE_850=y @@ -171,11 +174,8 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_DEBUG_PREEMPT is not set CONFIG_DEBUG_INFO=y -# CONFIG_RCU_CPU_STALL_DETECTOR is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_FTRACE is not set CONFIG_DEBUG_USER=y -CONFIG_DEBUG_ERRORS=y CONFIG_DEBUG_LL=y CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m diff --git a/arch/arm/configs/lpc32xx_defconfig b/arch/arm/configs/lpc32xx_defconfig index e42a0e3d4c3a6466375e492eaf5759c0cc0bff30..92386b20bd096cf27a9410c29e8e8822d2554964 100644 --- a/arch/arm/configs/lpc32xx_defconfig +++ b/arch/arm/configs/lpc32xx_defconfig @@ -133,7 +133,6 @@ CONFIG_SND_DEBUG_VERBOSE=y # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set CONFIG_SND_SOC=y -# CONFIG_HID_SUPPORT is not set CONFIG_USB=y CONFIG_USB_OHCI_HCD=y CONFIG_USB_STORAGE=y @@ -149,6 +148,7 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_PCA9532=y CONFIG_LEDS_PCA9532_GPIO=y CONFIG_LEDS_GPIO=y +CONFIG_LEDS_PWM=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y @@ -161,10 +161,13 @@ CONFIG_RTC_DRV_DS1374=y CONFIG_RTC_DRV_PCF8563=y CONFIG_RTC_DRV_LPC32XX=y CONFIG_DMADEVICES=y +CONFIG_AMBA_PL08X=y CONFIG_STAGING=y CONFIG_LPC32XX_ADC=y -CONFIG_MAX517=y CONFIG_IIO=y +CONFIG_MAX517=y +CONFIG_PWM=y +CONFIG_PWM_LPC32XX=y CONFIG_EXT2_FS=y CONFIG_AUTOFS4_FS=y CONFIG_MSDOS_FS=y diff --git a/arch/arm/configs/marzen_defconfig b/arch/arm/configs/marzen_defconfig index f513acedc10a57ee67099773019e2c4c54ab252e..53382b6c8bb43345ae75b8f1ea39ab509d161980 100644 --- a/arch/arm/configs/marzen_defconfig +++ b/arch/arm/configs/marzen_defconfig @@ -1,13 +1,14 @@ # CONFIG_ARM_PATCH_PHYS_VIRT is not set CONFIG_EXPERIMENTAL=y CONFIG_KERNEL_LZMA=y +CONFIG_NO_HZ=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=16 CONFIG_SYSCTL_SYSCALL=y CONFIG_EMBEDDED=y CONFIG_SLAB=y -# CONFIG_BLOCK is not set +# CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_SHMOBILE=y CONFIG_ARCH_R8A7779=y CONFIG_MACH_MARZEN=y @@ -21,7 +22,6 @@ CONFIG_ARM_ERRATA_458693=y CONFIG_ARM_ERRATA_460075=y CONFIG_ARM_ERRATA_743622=y CONFIG_ARM_ERRATA_754322=y -CONFIG_NO_HZ=y CONFIG_SMP=y # CONFIG_ARM_CPU_TOPOLOGY is not set CONFIG_AEABI=y @@ -29,13 +29,16 @@ CONFIG_AEABI=y CONFIG_HIGHMEM=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel" +CONFIG_CMDLINE="console=ttySC2,115200 earlyprintk=sh-sci.2,115200 ignore_loglevel root=/dev/nfs ip=on" CONFIG_CMDLINE_FORCE=y CONFIG_KEXEC=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_PM_RUNTIME=y CONFIG_NET=y +CONFIG_UNIX=y CONFIG_INET=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y # CONFIG_IPV6 is not set # CONFIG_WIRELESS is not set CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" @@ -71,16 +74,18 @@ CONFIG_GPIO_SYSFS=y CONFIG_THERMAL=y CONFIG_RCAR_THERMAL=y CONFIG_SSB=y -# CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +CONFIG_MMC_SDHI=y CONFIG_UIO=y CONFIG_UIO_PDRV_GENIRQ=y # CONFIG_IOMMU_SUPPORT is not set -# CONFIG_FILE_LOCKING is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY_USER is not set CONFIG_TMPFS=y # CONFIG_MISC_FILESYSTEMS is not set +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_INFO=y CONFIG_DEBUG_INFO_REDUCED=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 082175c54e7cc7343a15c7d0f15f3ddbf5631c8a..00630e6af45c2199f68998dfa7d9b5450a205bd5 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -102,7 +102,6 @@ CONFIG_MTD_CFI_STAA=y CONFIG_MTD_RAM=y CONFIG_MTD_ROM=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_S3C2410=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_LPDDR=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index 7305ebddb5105454edc11e353db1e6a864a87ed1..1f08219c1b3c68005f643ad8e5c23774c7f1bfd1 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -49,7 +49,6 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_ORION=y CONFIG_BLK_DEV_LOOP=y # CONFIG_SCSI_PROC_FS is not set diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index 2e86b31c33cf1cab3afe20243c085e26104e574a..7bcf850eddcd7f2c843c0b297eda1f24125cc03c 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -21,6 +21,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_FS_XATTR is not set diff --git a/arch/arm/configs/mxs_defconfig b/arch/arm/configs/mxs_defconfig index 36d60dda310c70844c22260a3f1b90ab9800a1df..048aaca60814c99d2143edee134d128ba9264a08 100644 --- a/arch/arm/configs/mxs_defconfig +++ b/arch/arm/configs/mxs_defconfig @@ -53,6 +53,9 @@ CONFIG_DEVTMPFS=y # CONFIG_FIRMWARE_IN_KERNEL is not set # CONFIG_BLK_DEV is not set CONFIG_MTD=y +CONFIG_MTD_CHAR=y +CONFIG_MTD_DATAFLASH=y +CONFIG_MTD_M25P80 CONFIG_MTD_NAND=y CONFIG_MTD_NAND_GPMI_NAND=y CONFIG_NETDEVICES=y @@ -82,13 +85,13 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_MXS=y CONFIG_SPI=y CONFIG_SPI_GPIO=m +CONFIG_SPI_MXS=y CONFIG_DEBUG_GPIO=y CONFIG_GPIO_SYSFS=y # CONFIG_HWMON is not set # CONFIG_MFD_SUPPORT is not set CONFIG_DISPLAY_SUPPORT=m # CONFIG_HID_SUPPORT is not set -# CONFIG_USB_SUPPORT is not set CONFIG_SOUND=y CONFIG_SND=y CONFIG_SND_TIMER=y @@ -103,14 +106,45 @@ CONFIG_SND_SOC_I2C_AND_SPI=y CONFIG_SND_SOC_SGTL5000=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_FB=y +CONFIG_FB_MXS=y +CONFIG_BACKLIGHT_LCD_SUPPORT=y +CONFIG_LCD_CLASS_DEVICE=y +CONFIG_BACKLIGHT_CLASS_DEVICE=y +CONFIG_BACKLIGHT_PWM=y +CONFIG_FRAMEBUFFER_CONSOLE=y +CONFIG_FONTS=y +CONFIG_LOGO=y +CONFIG_USB=y +CONFIG_USB_CHIPIDEA=y +CONFIG_USB_CHIPIDEA_HOST=y +CONFIG_USB_STORAGE=y +CONFIG_USB_MXS_PHY=y +CONFIG_SCSI=y +CONFIG_BLK_DEV_SD=y CONFIG_MMC=y CONFIG_MMC_MXS=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_TIMER=y +CONFIG_LEDS_TRIGGER_ONESHOT=y +CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_BACKLIGHT=y +CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=m CONFIG_RTC_DRV_STMP=y CONFIG_DMADEVICES=y CONFIG_MXS_DMA=y +CONFIG_STAGING=y +CONFIG_MXS_LRADC=y +CONFIG_IIO_SYSFS_TRIGGER=y CONFIG_COMMON_CLK_DEBUG=y +CONFIG_IIO=y +CONFIG_PWM=y +CONFIG_PWM_MXS=y CONFIG_EXT3_FS=y # CONFIG_DNOTIFY is not set CONFIG_FSCACHE=m diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index bf123c5384d4b345c3e0ddad9d8803c880410d59..240b25eea56559bb0588af7a048d720c15bb54ed 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -57,7 +57,6 @@ CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_NOMADIK=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index a288d7033950692f3ca05fee0501b3b091eb676b..cd5e6ba9a54da70d1896b0bcf1da731564dcd342 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -72,7 +72,6 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_NAND_ORION=y CONFIG_BLK_DEV_LOOP=y diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig index 1677a0607ca9bd254b3794ef2c8770c87297e360..60e313834b3f97a4ddd5310b40d962f194cce2de 100644 --- a/arch/arm/configs/pxa3xx_defconfig +++ b/arch/arm/configs/pxa3xx_defconfig @@ -36,7 +36,6 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_PXA3xx=y CONFIG_MTD_NAND_PXA3xx_BUILTIN=y CONFIG_MTD_ONENAND=y diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index ba6a515086b56b7b05deecc1ea91cb6d61fd6275..3a186d653dac2e7e5feaebe745ab15e1c65c0fea 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -9,11 +9,14 @@ CONFIG_ARCH_S3C64XX=y CONFIG_S3C_BOOT_ERROR_RESET=y CONFIG_MACH_SMDK6400=y CONFIG_MACH_ANW6410=y +CONFIG_MACH_MINI6410=y +CONFIG_MACH_REAL6410=y CONFIG_MACH_SMDK6410=y CONFIG_MACH_NCP=y CONFIG_MACH_HMT=y CONFIG_MACH_SMARTQ5=y CONFIG_MACH_SMARTQ7=y +CONFIG_MACH_WLF_CRAGG_6410=y CONFIG_CPU_32v6K=y CONFIG_AEABI=y CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/linuxrc initrd=0x51000000,6M ramdisk_size=6144" diff --git a/arch/arm/configs/sam9_l9260_defconfig b/arch/arm/configs/sam9_l9260_defconfig index ecf2531523a11bbcf34c8fd1b48ca3d7be5041dc..b4384af1bea66688b8464c171e3c2bc924a73a2c 100644 --- a/arch/arm/configs/sam9_l9260_defconfig +++ b/arch/arm/configs/sam9_l9260_defconfig @@ -39,7 +39,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ATMEL=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_RESERVE=3 +CONFIG_MTD_UBI_BEB_LIMIT=25 CONFIG_MTD_UBI_GLUEBI=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 70158273c6dd617cdf60f0ef3ca9b23f8d2cd253..df77931a43262c4a6c2f0740a891bbe0d38dc5bb 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -94,7 +94,6 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_ROM=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_SHARPSL=y CONFIG_BLK_DEV_LOOP=y CONFIG_IDE=y diff --git a/arch/arm/configs/tegra_defconfig b/arch/arm/configs/tegra_defconfig index 0d6bb738c6de370e6d13462ca398c262749aa50f..e2184f6c20b3d3e6eeb9338794fb37375a7d9709 100644 --- a/arch/arm/configs/tegra_defconfig +++ b/arch/arm/configs/tegra_defconfig @@ -24,11 +24,11 @@ CONFIG_EFI_PARTITION=y # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_TEGRA=y +CONFIG_GPIO_PCA953X=y CONFIG_ARCH_TEGRA_2x_SOC=y CONFIG_ARCH_TEGRA_3x_SOC=y -CONFIG_MACH_HARMONY=y -CONFIG_MACH_PAZ00=y -CONFIG_MACH_TRIMSLICE=y +CONFIG_TEGRA_PCI=y +CONFIG_TEGRA_DEBUG_UART_AUTO_ODMDATA=y CONFIG_TEGRA_EMC_SCALING_ENABLE=y CONFIG_SMP=y CONFIG_PREEMPT=y @@ -67,7 +67,18 @@ CONFIG_INET6_IPCOMP=y CONFIG_IPV6_MIP6=y CONFIG_IPV6_TUNNEL=y CONFIG_IPV6_MULTIPLE_TABLES=y -# CONFIG_WIRELESS is not set +CONFIG_BT=y +CONFIG_BT_RFCOMM=y +CONFIG_BT_BNEP=y +CONFIG_BT_HIDP=y +CONFIG_BT_HCIBTUSB=m +CONFIG_CFG80211=y +CONFIG_MAC80211=y +CONFIG_RFKILL=y +CONFIG_RFKILL_INPUT=y +CONFIG_RFKILL_GPIO=y +CONFIG_DEVTMPFS=y +CONFIG_DEVTMPFS_MOUNT=y # CONFIG_FIRMWARE_IN_KERNEL is not set CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y @@ -87,7 +98,8 @@ CONFIG_USB_PEGASUS=y CONFIG_USB_USBNET=y CONFIG_USB_NET_SMSC75XX=y CONFIG_USB_NET_SMSC95XX=y -# CONFIG_WLAN is not set +CONFIG_RT2X00=y +CONFIG_RT2800USB=m CONFIG_INPUT_EVDEV=y CONFIG_INPUT_MISC=y CONFIG_INPUT_MPU3050=y @@ -105,25 +117,31 @@ CONFIG_I2C_MUX_PINCTRL=y CONFIG_I2C_TEGRA=y CONFIG_SPI=y CONFIG_SPI_TEGRA=y -CONFIG_GPIO_TPS65910=y +CONFIG_GPIO_PCA953X_IRQ=y CONFIG_GPIO_TPS6586X=y +CONFIG_GPIO_TPS65910=y CONFIG_POWER_SUPPLY=y CONFIG_BATTERY_SBS=y CONFIG_SENSORS_LM90=y CONFIG_MFD_TPS6586X=y CONFIG_MFD_TPS65910=y +CONFIG_MFD_MAX8907=y CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y CONFIG_REGULATOR_VIRTUAL_CONSUMER=y CONFIG_REGULATOR_GPIO=y +CONFIG_REGULATOR_MAX8907=y CONFIG_REGULATOR_TPS62360=y CONFIG_REGULATOR_TPS6586X=y CONFIG_REGULATOR_TPS65910=y +CONFIG_MEDIA_SUPPORT=y +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_USB_SUPPORT=y +CONFIG_USB_VIDEO_CLASS=m CONFIG_SOUND=y CONFIG_SND=y # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_DRIVERS is not set -# CONFIG_SND_PCI is not set # CONFIG_SND_ARM is not set # CONFIG_SND_SPI is not set # CONFIG_SND_USB is not set @@ -136,13 +154,25 @@ CONFIG_SND_SOC_TEGRA_ALC5632=y CONFIG_USB=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_TEGRA=y +CONFIG_USB_ACM=y +CONFIG_USB_WDM=y CONFIG_USB_STORAGE=y CONFIG_MMC=y CONFIG_MMC_BLOCK_MINORS=16 CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_PLTFM=y CONFIG_MMC_SDHCI_TEGRA=y +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y +CONFIG_LEDS_GPIO=y +CONFIG_LEDS_TRIGGERS=y +CONFIG_LEDS_TRIGGER_GPIO=y CONFIG_RTC_CLASS=y +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +CONFIG_RTC_DRV_MAX8907=y +CONFIG_RTC_DRV_TPS65910=y CONFIG_RTC_DRV_EM3027=y CONFIG_RTC_DRV_TEGRA=y CONFIG_DMADEVICES=y @@ -154,10 +184,14 @@ CONFIG_SENSORS_AK8975=y CONFIG_MFD_NVEC=y CONFIG_KEYBOARD_NVEC=y CONFIG_SERIO_NVEC_PS2=y +CONFIG_NVEC_POWER=y +CONFIG_NVEC_PAZ00=y CONFIG_TEGRA_IOMMU_GART=y CONFIG_TEGRA_IOMMU_SMMU=y CONFIG_MEMORY=y CONFIG_IIO=y +CONFIG_PWM=y +CONFIG_PWM_TEGRA=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -170,6 +204,7 @@ CONFIG_EXT4_FS=y # CONFIG_DNOTIFY is not set CONFIG_VFAT_FS=y CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y CONFIG_NFS_FS=y CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y @@ -188,8 +223,6 @@ CONFIG_DEBUG_VM=y CONFIG_DEBUG_SG=y CONFIG_DEBUG_LL=y CONFIG_EARLY_PRINTK=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_ARC4=y CONFIG_CRYPTO_TWOFISH=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_DEV_TEGRA_AES=y diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile new file mode 100644 index 0000000000000000000000000000000000000000..a2c83851bc90a29f5f1d06415cb4a0db4dd726e1 --- /dev/null +++ b/arch/arm/crypto/Makefile @@ -0,0 +1,9 @@ +# +# Arch-specific CryptoAPI modules. +# + +obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o +obj-$(CONFIG_CRYPTO_SHA1_ARM) += sha1-arm.o + +aes-arm-y := aes-armv4.o aes_glue.o +sha1-arm-y := sha1-armv4-large.o sha1_glue.o diff --git a/arch/arm/crypto/aes-armv4.S b/arch/arm/crypto/aes-armv4.S new file mode 100644 index 0000000000000000000000000000000000000000..e59b1d505d6c84ca738351a478901582e1f2ad0b --- /dev/null +++ b/arch/arm/crypto/aes-armv4.S @@ -0,0 +1,1112 @@ +#define __ARM_ARCH__ __LINUX_ARM_ARCH__ +@ ==================================================================== +@ Written by Andy Polyakov for the OpenSSL +@ project. The module is, however, dual licensed under OpenSSL and +@ CRYPTOGAMS licenses depending on where you obtain it. For further +@ details see http://www.openssl.org/~appro/cryptogams/. +@ ==================================================================== + +@ AES for ARMv4 + +@ January 2007. +@ +@ Code uses single 1K S-box and is >2 times faster than code generated +@ by gcc-3.4.1. This is thanks to unique feature of ARMv4 ISA, which +@ allows to merge logical or arithmetic operation with shift or rotate +@ in one instruction and emit combined result every cycle. The module +@ is endian-neutral. The performance is ~42 cycles/byte for 128-bit +@ key [on single-issue Xscale PXA250 core]. + +@ May 2007. +@ +@ AES_set_[en|de]crypt_key is added. + +@ July 2010. +@ +@ Rescheduling for dual-issue pipeline resulted in 12% improvement on +@ Cortex A8 core and ~25 cycles per byte processed with 128-bit key. + +@ February 2011. +@ +@ Profiler-assisted and platform-specific optimization resulted in 16% +@ improvement on Cortex A8 core and ~21.5 cycles per byte. + +@ A little glue here to select the correct code below for the ARM CPU +@ that is being targetted. + +.text +.code 32 + +.type AES_Te,%object +.align 5 +AES_Te: +.word 0xc66363a5, 0xf87c7c84, 0xee777799, 0xf67b7b8d +.word 0xfff2f20d, 0xd66b6bbd, 0xde6f6fb1, 0x91c5c554 +.word 0x60303050, 0x02010103, 0xce6767a9, 0x562b2b7d +.word 0xe7fefe19, 0xb5d7d762, 0x4dababe6, 0xec76769a +.word 0x8fcaca45, 0x1f82829d, 0x89c9c940, 0xfa7d7d87 +.word 0xeffafa15, 0xb25959eb, 0x8e4747c9, 0xfbf0f00b +.word 0x41adadec, 0xb3d4d467, 0x5fa2a2fd, 0x45afafea +.word 0x239c9cbf, 0x53a4a4f7, 0xe4727296, 0x9bc0c05b +.word 0x75b7b7c2, 0xe1fdfd1c, 0x3d9393ae, 0x4c26266a +.word 0x6c36365a, 0x7e3f3f41, 0xf5f7f702, 0x83cccc4f +.word 0x6834345c, 0x51a5a5f4, 0xd1e5e534, 0xf9f1f108 +.word 0xe2717193, 0xabd8d873, 0x62313153, 0x2a15153f +.word 0x0804040c, 0x95c7c752, 0x46232365, 0x9dc3c35e +.word 0x30181828, 0x379696a1, 0x0a05050f, 0x2f9a9ab5 +.word 0x0e070709, 0x24121236, 0x1b80809b, 0xdfe2e23d +.word 0xcdebeb26, 0x4e272769, 0x7fb2b2cd, 0xea75759f +.word 0x1209091b, 0x1d83839e, 0x582c2c74, 0x341a1a2e +.word 0x361b1b2d, 0xdc6e6eb2, 0xb45a5aee, 0x5ba0a0fb +.word 0xa45252f6, 0x763b3b4d, 0xb7d6d661, 0x7db3b3ce +.word 0x5229297b, 0xdde3e33e, 0x5e2f2f71, 0x13848497 +.word 0xa65353f5, 0xb9d1d168, 0x00000000, 0xc1eded2c +.word 0x40202060, 0xe3fcfc1f, 0x79b1b1c8, 0xb65b5bed +.word 0xd46a6abe, 0x8dcbcb46, 0x67bebed9, 0x7239394b +.word 0x944a4ade, 0x984c4cd4, 0xb05858e8, 0x85cfcf4a +.word 0xbbd0d06b, 0xc5efef2a, 0x4faaaae5, 0xedfbfb16 +.word 0x864343c5, 0x9a4d4dd7, 0x66333355, 0x11858594 +.word 0x8a4545cf, 0xe9f9f910, 0x04020206, 0xfe7f7f81 +.word 0xa05050f0, 0x783c3c44, 0x259f9fba, 0x4ba8a8e3 +.word 0xa25151f3, 0x5da3a3fe, 0x804040c0, 0x058f8f8a +.word 0x3f9292ad, 0x219d9dbc, 0x70383848, 0xf1f5f504 +.word 0x63bcbcdf, 0x77b6b6c1, 0xafdada75, 0x42212163 +.word 0x20101030, 0xe5ffff1a, 0xfdf3f30e, 0xbfd2d26d +.word 0x81cdcd4c, 0x180c0c14, 0x26131335, 0xc3ecec2f +.word 0xbe5f5fe1, 0x359797a2, 0x884444cc, 0x2e171739 +.word 0x93c4c457, 0x55a7a7f2, 0xfc7e7e82, 0x7a3d3d47 +.word 0xc86464ac, 0xba5d5de7, 0x3219192b, 0xe6737395 +.word 0xc06060a0, 0x19818198, 0x9e4f4fd1, 0xa3dcdc7f +.word 0x44222266, 0x542a2a7e, 0x3b9090ab, 0x0b888883 +.word 0x8c4646ca, 0xc7eeee29, 0x6bb8b8d3, 0x2814143c +.word 0xa7dede79, 0xbc5e5ee2, 0x160b0b1d, 0xaddbdb76 +.word 0xdbe0e03b, 0x64323256, 0x743a3a4e, 0x140a0a1e +.word 0x924949db, 0x0c06060a, 0x4824246c, 0xb85c5ce4 +.word 0x9fc2c25d, 0xbdd3d36e, 0x43acacef, 0xc46262a6 +.word 0x399191a8, 0x319595a4, 0xd3e4e437, 0xf279798b +.word 0xd5e7e732, 0x8bc8c843, 0x6e373759, 0xda6d6db7 +.word 0x018d8d8c, 0xb1d5d564, 0x9c4e4ed2, 0x49a9a9e0 +.word 0xd86c6cb4, 0xac5656fa, 0xf3f4f407, 0xcfeaea25 +.word 0xca6565af, 0xf47a7a8e, 0x47aeaee9, 0x10080818 +.word 0x6fbabad5, 0xf0787888, 0x4a25256f, 0x5c2e2e72 +.word 0x381c1c24, 0x57a6a6f1, 0x73b4b4c7, 0x97c6c651 +.word 0xcbe8e823, 0xa1dddd7c, 0xe874749c, 0x3e1f1f21 +.word 0x964b4bdd, 0x61bdbddc, 0x0d8b8b86, 0x0f8a8a85 +.word 0xe0707090, 0x7c3e3e42, 0x71b5b5c4, 0xcc6666aa +.word 0x904848d8, 0x06030305, 0xf7f6f601, 0x1c0e0e12 +.word 0xc26161a3, 0x6a35355f, 0xae5757f9, 0x69b9b9d0 +.word 0x17868691, 0x99c1c158, 0x3a1d1d27, 0x279e9eb9 +.word 0xd9e1e138, 0xebf8f813, 0x2b9898b3, 0x22111133 +.word 0xd26969bb, 0xa9d9d970, 0x078e8e89, 0x339494a7 +.word 0x2d9b9bb6, 0x3c1e1e22, 0x15878792, 0xc9e9e920 +.word 0x87cece49, 0xaa5555ff, 0x50282878, 0xa5dfdf7a +.word 0x038c8c8f, 0x59a1a1f8, 0x09898980, 0x1a0d0d17 +.word 0x65bfbfda, 0xd7e6e631, 0x844242c6, 0xd06868b8 +.word 0x824141c3, 0x299999b0, 0x5a2d2d77, 0x1e0f0f11 +.word 0x7bb0b0cb, 0xa85454fc, 0x6dbbbbd6, 0x2c16163a +@ Te4[256] +.byte 0x63, 0x7c, 0x77, 0x7b, 0xf2, 0x6b, 0x6f, 0xc5 +.byte 0x30, 0x01, 0x67, 0x2b, 0xfe, 0xd7, 0xab, 0x76 +.byte 0xca, 0x82, 0xc9, 0x7d, 0xfa, 0x59, 0x47, 0xf0 +.byte 0xad, 0xd4, 0xa2, 0xaf, 0x9c, 0xa4, 0x72, 0xc0 +.byte 0xb7, 0xfd, 0x93, 0x26, 0x36, 0x3f, 0xf7, 0xcc +.byte 0x34, 0xa5, 0xe5, 0xf1, 0x71, 0xd8, 0x31, 0x15 +.byte 0x04, 0xc7, 0x23, 0xc3, 0x18, 0x96, 0x05, 0x9a +.byte 0x07, 0x12, 0x80, 0xe2, 0xeb, 0x27, 0xb2, 0x75 +.byte 0x09, 0x83, 0x2c, 0x1a, 0x1b, 0x6e, 0x5a, 0xa0 +.byte 0x52, 0x3b, 0xd6, 0xb3, 0x29, 0xe3, 0x2f, 0x84 +.byte 0x53, 0xd1, 0x00, 0xed, 0x20, 0xfc, 0xb1, 0x5b +.byte 0x6a, 0xcb, 0xbe, 0x39, 0x4a, 0x4c, 0x58, 0xcf +.byte 0xd0, 0xef, 0xaa, 0xfb, 0x43, 0x4d, 0x33, 0x85 +.byte 0x45, 0xf9, 0x02, 0x7f, 0x50, 0x3c, 0x9f, 0xa8 +.byte 0x51, 0xa3, 0x40, 0x8f, 0x92, 0x9d, 0x38, 0xf5 +.byte 0xbc, 0xb6, 0xda, 0x21, 0x10, 0xff, 0xf3, 0xd2 +.byte 0xcd, 0x0c, 0x13, 0xec, 0x5f, 0x97, 0x44, 0x17 +.byte 0xc4, 0xa7, 0x7e, 0x3d, 0x64, 0x5d, 0x19, 0x73 +.byte 0x60, 0x81, 0x4f, 0xdc, 0x22, 0x2a, 0x90, 0x88 +.byte 0x46, 0xee, 0xb8, 0x14, 0xde, 0x5e, 0x0b, 0xdb +.byte 0xe0, 0x32, 0x3a, 0x0a, 0x49, 0x06, 0x24, 0x5c +.byte 0xc2, 0xd3, 0xac, 0x62, 0x91, 0x95, 0xe4, 0x79 +.byte 0xe7, 0xc8, 0x37, 0x6d, 0x8d, 0xd5, 0x4e, 0xa9 +.byte 0x6c, 0x56, 0xf4, 0xea, 0x65, 0x7a, 0xae, 0x08 +.byte 0xba, 0x78, 0x25, 0x2e, 0x1c, 0xa6, 0xb4, 0xc6 +.byte 0xe8, 0xdd, 0x74, 0x1f, 0x4b, 0xbd, 0x8b, 0x8a +.byte 0x70, 0x3e, 0xb5, 0x66, 0x48, 0x03, 0xf6, 0x0e +.byte 0x61, 0x35, 0x57, 0xb9, 0x86, 0xc1, 0x1d, 0x9e +.byte 0xe1, 0xf8, 0x98, 0x11, 0x69, 0xd9, 0x8e, 0x94 +.byte 0x9b, 0x1e, 0x87, 0xe9, 0xce, 0x55, 0x28, 0xdf +.byte 0x8c, 0xa1, 0x89, 0x0d, 0xbf, 0xe6, 0x42, 0x68 +.byte 0x41, 0x99, 0x2d, 0x0f, 0xb0, 0x54, 0xbb, 0x16 +@ rcon[] +.word 0x01000000, 0x02000000, 0x04000000, 0x08000000 +.word 0x10000000, 0x20000000, 0x40000000, 0x80000000 +.word 0x1B000000, 0x36000000, 0, 0, 0, 0, 0, 0 +.size AES_Te,.-AES_Te + +@ void AES_encrypt(const unsigned char *in, unsigned char *out, +@ const AES_KEY *key) { +.global AES_encrypt +.type AES_encrypt,%function +.align 5 +AES_encrypt: + sub r3,pc,#8 @ AES_encrypt + stmdb sp!,{r1,r4-r12,lr} + mov r12,r0 @ inp + mov r11,r2 + sub r10,r3,#AES_encrypt-AES_Te @ Te +#if __ARM_ARCH__<7 + ldrb r0,[r12,#3] @ load input data in endian-neutral + ldrb r4,[r12,#2] @ manner... + ldrb r5,[r12,#1] + ldrb r6,[r12,#0] + orr r0,r0,r4,lsl#8 + ldrb r1,[r12,#7] + orr r0,r0,r5,lsl#16 + ldrb r4,[r12,#6] + orr r0,r0,r6,lsl#24 + ldrb r5,[r12,#5] + ldrb r6,[r12,#4] + orr r1,r1,r4,lsl#8 + ldrb r2,[r12,#11] + orr r1,r1,r5,lsl#16 + ldrb r4,[r12,#10] + orr r1,r1,r6,lsl#24 + ldrb r5,[r12,#9] + ldrb r6,[r12,#8] + orr r2,r2,r4,lsl#8 + ldrb r3,[r12,#15] + orr r2,r2,r5,lsl#16 + ldrb r4,[r12,#14] + orr r2,r2,r6,lsl#24 + ldrb r5,[r12,#13] + ldrb r6,[r12,#12] + orr r3,r3,r4,lsl#8 + orr r3,r3,r5,lsl#16 + orr r3,r3,r6,lsl#24 +#else + ldr r0,[r12,#0] + ldr r1,[r12,#4] + ldr r2,[r12,#8] + ldr r3,[r12,#12] +#ifdef __ARMEL__ + rev r0,r0 + rev r1,r1 + rev r2,r2 + rev r3,r3 +#endif +#endif + bl _armv4_AES_encrypt + + ldr r12,[sp],#4 @ pop out +#if __ARM_ARCH__>=7 +#ifdef __ARMEL__ + rev r0,r0 + rev r1,r1 + rev r2,r2 + rev r3,r3 +#endif + str r0,[r12,#0] + str r1,[r12,#4] + str r2,[r12,#8] + str r3,[r12,#12] +#else + mov r4,r0,lsr#24 @ write output in endian-neutral + mov r5,r0,lsr#16 @ manner... + mov r6,r0,lsr#8 + strb r4,[r12,#0] + strb r5,[r12,#1] + mov r4,r1,lsr#24 + strb r6,[r12,#2] + mov r5,r1,lsr#16 + strb r0,[r12,#3] + mov r6,r1,lsr#8 + strb r4,[r12,#4] + strb r5,[r12,#5] + mov r4,r2,lsr#24 + strb r6,[r12,#6] + mov r5,r2,lsr#16 + strb r1,[r12,#7] + mov r6,r2,lsr#8 + strb r4,[r12,#8] + strb r5,[r12,#9] + mov r4,r3,lsr#24 + strb r6,[r12,#10] + mov r5,r3,lsr#16 + strb r2,[r12,#11] + mov r6,r3,lsr#8 + strb r4,[r12,#12] + strb r5,[r12,#13] + strb r6,[r12,#14] + strb r3,[r12,#15] +#endif +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r12,pc} +#else + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.size AES_encrypt,.-AES_encrypt + +.type _armv4_AES_encrypt,%function +.align 2 +_armv4_AES_encrypt: + str lr,[sp,#-4]! @ push lr + ldmia r11!,{r4-r7} + eor r0,r0,r4 + ldr r12,[r11,#240-16] + eor r1,r1,r5 + eor r2,r2,r6 + eor r3,r3,r7 + sub r12,r12,#1 + mov lr,#255 + + and r7,lr,r0 + and r8,lr,r0,lsr#8 + and r9,lr,r0,lsr#16 + mov r0,r0,lsr#24 +.Lenc_loop: + ldr r4,[r10,r7,lsl#2] @ Te3[s0>>0] + and r7,lr,r1,lsr#16 @ i0 + ldr r5,[r10,r8,lsl#2] @ Te2[s0>>8] + and r8,lr,r1 + ldr r6,[r10,r9,lsl#2] @ Te1[s0>>16] + and r9,lr,r1,lsr#8 + ldr r0,[r10,r0,lsl#2] @ Te0[s0>>24] + mov r1,r1,lsr#24 + + ldr r7,[r10,r7,lsl#2] @ Te1[s1>>16] + ldr r8,[r10,r8,lsl#2] @ Te3[s1>>0] + ldr r9,[r10,r9,lsl#2] @ Te2[s1>>8] + eor r0,r0,r7,ror#8 + ldr r1,[r10,r1,lsl#2] @ Te0[s1>>24] + and r7,lr,r2,lsr#8 @ i0 + eor r5,r5,r8,ror#8 + and r8,lr,r2,lsr#16 @ i1 + eor r6,r6,r9,ror#8 + and r9,lr,r2 + ldr r7,[r10,r7,lsl#2] @ Te2[s2>>8] + eor r1,r1,r4,ror#24 + ldr r8,[r10,r8,lsl#2] @ Te1[s2>>16] + mov r2,r2,lsr#24 + + ldr r9,[r10,r9,lsl#2] @ Te3[s2>>0] + eor r0,r0,r7,ror#16 + ldr r2,[r10,r2,lsl#2] @ Te0[s2>>24] + and r7,lr,r3 @ i0 + eor r1,r1,r8,ror#8 + and r8,lr,r3,lsr#8 @ i1 + eor r6,r6,r9,ror#16 + and r9,lr,r3,lsr#16 @ i2 + ldr r7,[r10,r7,lsl#2] @ Te3[s3>>0] + eor r2,r2,r5,ror#16 + ldr r8,[r10,r8,lsl#2] @ Te2[s3>>8] + mov r3,r3,lsr#24 + + ldr r9,[r10,r9,lsl#2] @ Te1[s3>>16] + eor r0,r0,r7,ror#24 + ldr r7,[r11],#16 + eor r1,r1,r8,ror#16 + ldr r3,[r10,r3,lsl#2] @ Te0[s3>>24] + eor r2,r2,r9,ror#8 + ldr r4,[r11,#-12] + eor r3,r3,r6,ror#8 + + ldr r5,[r11,#-8] + eor r0,r0,r7 + ldr r6,[r11,#-4] + and r7,lr,r0 + eor r1,r1,r4 + and r8,lr,r0,lsr#8 + eor r2,r2,r5 + and r9,lr,r0,lsr#16 + eor r3,r3,r6 + mov r0,r0,lsr#24 + + subs r12,r12,#1 + bne .Lenc_loop + + add r10,r10,#2 + + ldrb r4,[r10,r7,lsl#2] @ Te4[s0>>0] + and r7,lr,r1,lsr#16 @ i0 + ldrb r5,[r10,r8,lsl#2] @ Te4[s0>>8] + and r8,lr,r1 + ldrb r6,[r10,r9,lsl#2] @ Te4[s0>>16] + and r9,lr,r1,lsr#8 + ldrb r0,[r10,r0,lsl#2] @ Te4[s0>>24] + mov r1,r1,lsr#24 + + ldrb r7,[r10,r7,lsl#2] @ Te4[s1>>16] + ldrb r8,[r10,r8,lsl#2] @ Te4[s1>>0] + ldrb r9,[r10,r9,lsl#2] @ Te4[s1>>8] + eor r0,r7,r0,lsl#8 + ldrb r1,[r10,r1,lsl#2] @ Te4[s1>>24] + and r7,lr,r2,lsr#8 @ i0 + eor r5,r8,r5,lsl#8 + and r8,lr,r2,lsr#16 @ i1 + eor r6,r9,r6,lsl#8 + and r9,lr,r2 + ldrb r7,[r10,r7,lsl#2] @ Te4[s2>>8] + eor r1,r4,r1,lsl#24 + ldrb r8,[r10,r8,lsl#2] @ Te4[s2>>16] + mov r2,r2,lsr#24 + + ldrb r9,[r10,r9,lsl#2] @ Te4[s2>>0] + eor r0,r7,r0,lsl#8 + ldrb r2,[r10,r2,lsl#2] @ Te4[s2>>24] + and r7,lr,r3 @ i0 + eor r1,r1,r8,lsl#16 + and r8,lr,r3,lsr#8 @ i1 + eor r6,r9,r6,lsl#8 + and r9,lr,r3,lsr#16 @ i2 + ldrb r7,[r10,r7,lsl#2] @ Te4[s3>>0] + eor r2,r5,r2,lsl#24 + ldrb r8,[r10,r8,lsl#2] @ Te4[s3>>8] + mov r3,r3,lsr#24 + + ldrb r9,[r10,r9,lsl#2] @ Te4[s3>>16] + eor r0,r7,r0,lsl#8 + ldr r7,[r11,#0] + ldrb r3,[r10,r3,lsl#2] @ Te4[s3>>24] + eor r1,r1,r8,lsl#8 + ldr r4,[r11,#4] + eor r2,r2,r9,lsl#16 + ldr r5,[r11,#8] + eor r3,r6,r3,lsl#24 + ldr r6,[r11,#12] + + eor r0,r0,r7 + eor r1,r1,r4 + eor r2,r2,r5 + eor r3,r3,r6 + + sub r10,r10,#2 + ldr pc,[sp],#4 @ pop and return +.size _armv4_AES_encrypt,.-_armv4_AES_encrypt + +.global private_AES_set_encrypt_key +.type private_AES_set_encrypt_key,%function +.align 5 +private_AES_set_encrypt_key: +_armv4_AES_set_encrypt_key: + sub r3,pc,#8 @ AES_set_encrypt_key + teq r0,#0 + moveq r0,#-1 + beq .Labrt + teq r2,#0 + moveq r0,#-1 + beq .Labrt + + teq r1,#128 + beq .Lok + teq r1,#192 + beq .Lok + teq r1,#256 + movne r0,#-1 + bne .Labrt + +.Lok: stmdb sp!,{r4-r12,lr} + sub r10,r3,#_armv4_AES_set_encrypt_key-AES_Te-1024 @ Te4 + + mov r12,r0 @ inp + mov lr,r1 @ bits + mov r11,r2 @ key + +#if __ARM_ARCH__<7 + ldrb r0,[r12,#3] @ load input data in endian-neutral + ldrb r4,[r12,#2] @ manner... + ldrb r5,[r12,#1] + ldrb r6,[r12,#0] + orr r0,r0,r4,lsl#8 + ldrb r1,[r12,#7] + orr r0,r0,r5,lsl#16 + ldrb r4,[r12,#6] + orr r0,r0,r6,lsl#24 + ldrb r5,[r12,#5] + ldrb r6,[r12,#4] + orr r1,r1,r4,lsl#8 + ldrb r2,[r12,#11] + orr r1,r1,r5,lsl#16 + ldrb r4,[r12,#10] + orr r1,r1,r6,lsl#24 + ldrb r5,[r12,#9] + ldrb r6,[r12,#8] + orr r2,r2,r4,lsl#8 + ldrb r3,[r12,#15] + orr r2,r2,r5,lsl#16 + ldrb r4,[r12,#14] + orr r2,r2,r6,lsl#24 + ldrb r5,[r12,#13] + ldrb r6,[r12,#12] + orr r3,r3,r4,lsl#8 + str r0,[r11],#16 + orr r3,r3,r5,lsl#16 + str r1,[r11,#-12] + orr r3,r3,r6,lsl#24 + str r2,[r11,#-8] + str r3,[r11,#-4] +#else + ldr r0,[r12,#0] + ldr r1,[r12,#4] + ldr r2,[r12,#8] + ldr r3,[r12,#12] +#ifdef __ARMEL__ + rev r0,r0 + rev r1,r1 + rev r2,r2 + rev r3,r3 +#endif + str r0,[r11],#16 + str r1,[r11,#-12] + str r2,[r11,#-8] + str r3,[r11,#-4] +#endif + + teq lr,#128 + bne .Lnot128 + mov r12,#10 + str r12,[r11,#240-16] + add r6,r10,#256 @ rcon + mov lr,#255 + +.L128_loop: + and r5,lr,r3,lsr#24 + and r7,lr,r3,lsr#16 + ldrb r5,[r10,r5] + and r8,lr,r3,lsr#8 + ldrb r7,[r10,r7] + and r9,lr,r3 + ldrb r8,[r10,r8] + orr r5,r5,r7,lsl#24 + ldrb r9,[r10,r9] + orr r5,r5,r8,lsl#16 + ldr r4,[r6],#4 @ rcon[i++] + orr r5,r5,r9,lsl#8 + eor r5,r5,r4 + eor r0,r0,r5 @ rk[4]=rk[0]^... + eor r1,r1,r0 @ rk[5]=rk[1]^rk[4] + str r0,[r11],#16 + eor r2,r2,r1 @ rk[6]=rk[2]^rk[5] + str r1,[r11,#-12] + eor r3,r3,r2 @ rk[7]=rk[3]^rk[6] + str r2,[r11,#-8] + subs r12,r12,#1 + str r3,[r11,#-4] + bne .L128_loop + sub r2,r11,#176 + b .Ldone + +.Lnot128: +#if __ARM_ARCH__<7 + ldrb r8,[r12,#19] + ldrb r4,[r12,#18] + ldrb r5,[r12,#17] + ldrb r6,[r12,#16] + orr r8,r8,r4,lsl#8 + ldrb r9,[r12,#23] + orr r8,r8,r5,lsl#16 + ldrb r4,[r12,#22] + orr r8,r8,r6,lsl#24 + ldrb r5,[r12,#21] + ldrb r6,[r12,#20] + orr r9,r9,r4,lsl#8 + orr r9,r9,r5,lsl#16 + str r8,[r11],#8 + orr r9,r9,r6,lsl#24 + str r9,[r11,#-4] +#else + ldr r8,[r12,#16] + ldr r9,[r12,#20] +#ifdef __ARMEL__ + rev r8,r8 + rev r9,r9 +#endif + str r8,[r11],#8 + str r9,[r11,#-4] +#endif + + teq lr,#192 + bne .Lnot192 + mov r12,#12 + str r12,[r11,#240-24] + add r6,r10,#256 @ rcon + mov lr,#255 + mov r12,#8 + +.L192_loop: + and r5,lr,r9,lsr#24 + and r7,lr,r9,lsr#16 + ldrb r5,[r10,r5] + and r8,lr,r9,lsr#8 + ldrb r7,[r10,r7] + and r9,lr,r9 + ldrb r8,[r10,r8] + orr r5,r5,r7,lsl#24 + ldrb r9,[r10,r9] + orr r5,r5,r8,lsl#16 + ldr r4,[r6],#4 @ rcon[i++] + orr r5,r5,r9,lsl#8 + eor r9,r5,r4 + eor r0,r0,r9 @ rk[6]=rk[0]^... + eor r1,r1,r0 @ rk[7]=rk[1]^rk[6] + str r0,[r11],#24 + eor r2,r2,r1 @ rk[8]=rk[2]^rk[7] + str r1,[r11,#-20] + eor r3,r3,r2 @ rk[9]=rk[3]^rk[8] + str r2,[r11,#-16] + subs r12,r12,#1 + str r3,[r11,#-12] + subeq r2,r11,#216 + beq .Ldone + + ldr r7,[r11,#-32] + ldr r8,[r11,#-28] + eor r7,r7,r3 @ rk[10]=rk[4]^rk[9] + eor r9,r8,r7 @ rk[11]=rk[5]^rk[10] + str r7,[r11,#-8] + str r9,[r11,#-4] + b .L192_loop + +.Lnot192: +#if __ARM_ARCH__<7 + ldrb r8,[r12,#27] + ldrb r4,[r12,#26] + ldrb r5,[r12,#25] + ldrb r6,[r12,#24] + orr r8,r8,r4,lsl#8 + ldrb r9,[r12,#31] + orr r8,r8,r5,lsl#16 + ldrb r4,[r12,#30] + orr r8,r8,r6,lsl#24 + ldrb r5,[r12,#29] + ldrb r6,[r12,#28] + orr r9,r9,r4,lsl#8 + orr r9,r9,r5,lsl#16 + str r8,[r11],#8 + orr r9,r9,r6,lsl#24 + str r9,[r11,#-4] +#else + ldr r8,[r12,#24] + ldr r9,[r12,#28] +#ifdef __ARMEL__ + rev r8,r8 + rev r9,r9 +#endif + str r8,[r11],#8 + str r9,[r11,#-4] +#endif + + mov r12,#14 + str r12,[r11,#240-32] + add r6,r10,#256 @ rcon + mov lr,#255 + mov r12,#7 + +.L256_loop: + and r5,lr,r9,lsr#24 + and r7,lr,r9,lsr#16 + ldrb r5,[r10,r5] + and r8,lr,r9,lsr#8 + ldrb r7,[r10,r7] + and r9,lr,r9 + ldrb r8,[r10,r8] + orr r5,r5,r7,lsl#24 + ldrb r9,[r10,r9] + orr r5,r5,r8,lsl#16 + ldr r4,[r6],#4 @ rcon[i++] + orr r5,r5,r9,lsl#8 + eor r9,r5,r4 + eor r0,r0,r9 @ rk[8]=rk[0]^... + eor r1,r1,r0 @ rk[9]=rk[1]^rk[8] + str r0,[r11],#32 + eor r2,r2,r1 @ rk[10]=rk[2]^rk[9] + str r1,[r11,#-28] + eor r3,r3,r2 @ rk[11]=rk[3]^rk[10] + str r2,[r11,#-24] + subs r12,r12,#1 + str r3,[r11,#-20] + subeq r2,r11,#256 + beq .Ldone + + and r5,lr,r3 + and r7,lr,r3,lsr#8 + ldrb r5,[r10,r5] + and r8,lr,r3,lsr#16 + ldrb r7,[r10,r7] + and r9,lr,r3,lsr#24 + ldrb r8,[r10,r8] + orr r5,r5,r7,lsl#8 + ldrb r9,[r10,r9] + orr r5,r5,r8,lsl#16 + ldr r4,[r11,#-48] + orr r5,r5,r9,lsl#24 + + ldr r7,[r11,#-44] + ldr r8,[r11,#-40] + eor r4,r4,r5 @ rk[12]=rk[4]^... + ldr r9,[r11,#-36] + eor r7,r7,r4 @ rk[13]=rk[5]^rk[12] + str r4,[r11,#-16] + eor r8,r8,r7 @ rk[14]=rk[6]^rk[13] + str r7,[r11,#-12] + eor r9,r9,r8 @ rk[15]=rk[7]^rk[14] + str r8,[r11,#-8] + str r9,[r11,#-4] + b .L256_loop + +.Ldone: mov r0,#0 + ldmia sp!,{r4-r12,lr} +.Labrt: tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +.size private_AES_set_encrypt_key,.-private_AES_set_encrypt_key + +.global private_AES_set_decrypt_key +.type private_AES_set_decrypt_key,%function +.align 5 +private_AES_set_decrypt_key: + str lr,[sp,#-4]! @ push lr +#if 0 + @ kernel does both of these in setkey so optimise this bit out by + @ expecting the key to already have the enc_key work done (see aes_glue.c) + bl _armv4_AES_set_encrypt_key +#else + mov r0,#0 +#endif + teq r0,#0 + ldrne lr,[sp],#4 @ pop lr + bne .Labrt + + stmdb sp!,{r4-r12} + + ldr r12,[r2,#240] @ AES_set_encrypt_key preserves r2, + mov r11,r2 @ which is AES_KEY *key + mov r7,r2 + add r8,r2,r12,lsl#4 + +.Linv: ldr r0,[r7] + ldr r1,[r7,#4] + ldr r2,[r7,#8] + ldr r3,[r7,#12] + ldr r4,[r8] + ldr r5,[r8,#4] + ldr r6,[r8,#8] + ldr r9,[r8,#12] + str r0,[r8],#-16 + str r1,[r8,#16+4] + str r2,[r8,#16+8] + str r3,[r8,#16+12] + str r4,[r7],#16 + str r5,[r7,#-12] + str r6,[r7,#-8] + str r9,[r7,#-4] + teq r7,r8 + bne .Linv + ldr r0,[r11,#16]! @ prefetch tp1 + mov r7,#0x80 + mov r8,#0x1b + orr r7,r7,#0x8000 + orr r8,r8,#0x1b00 + orr r7,r7,r7,lsl#16 + orr r8,r8,r8,lsl#16 + sub r12,r12,#1 + mvn r9,r7 + mov r12,r12,lsl#2 @ (rounds-1)*4 + +.Lmix: and r4,r0,r7 + and r1,r0,r9 + sub r4,r4,r4,lsr#7 + and r4,r4,r8 + eor r1,r4,r1,lsl#1 @ tp2 + + and r4,r1,r7 + and r2,r1,r9 + sub r4,r4,r4,lsr#7 + and r4,r4,r8 + eor r2,r4,r2,lsl#1 @ tp4 + + and r4,r2,r7 + and r3,r2,r9 + sub r4,r4,r4,lsr#7 + and r4,r4,r8 + eor r3,r4,r3,lsl#1 @ tp8 + + eor r4,r1,r2 + eor r5,r0,r3 @ tp9 + eor r4,r4,r3 @ tpe + eor r4,r4,r1,ror#24 + eor r4,r4,r5,ror#24 @ ^= ROTATE(tpb=tp9^tp2,8) + eor r4,r4,r2,ror#16 + eor r4,r4,r5,ror#16 @ ^= ROTATE(tpd=tp9^tp4,16) + eor r4,r4,r5,ror#8 @ ^= ROTATE(tp9,24) + + ldr r0,[r11,#4] @ prefetch tp1 + str r4,[r11],#4 + subs r12,r12,#1 + bne .Lmix + + mov r0,#0 +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r12,pc} +#else + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.size private_AES_set_decrypt_key,.-private_AES_set_decrypt_key + +.type AES_Td,%object +.align 5 +AES_Td: +.word 0x51f4a750, 0x7e416553, 0x1a17a4c3, 0x3a275e96 +.word 0x3bab6bcb, 0x1f9d45f1, 0xacfa58ab, 0x4be30393 +.word 0x2030fa55, 0xad766df6, 0x88cc7691, 0xf5024c25 +.word 0x4fe5d7fc, 0xc52acbd7, 0x26354480, 0xb562a38f +.word 0xdeb15a49, 0x25ba1b67, 0x45ea0e98, 0x5dfec0e1 +.word 0xc32f7502, 0x814cf012, 0x8d4697a3, 0x6bd3f9c6 +.word 0x038f5fe7, 0x15929c95, 0xbf6d7aeb, 0x955259da +.word 0xd4be832d, 0x587421d3, 0x49e06929, 0x8ec9c844 +.word 0x75c2896a, 0xf48e7978, 0x99583e6b, 0x27b971dd +.word 0xbee14fb6, 0xf088ad17, 0xc920ac66, 0x7dce3ab4 +.word 0x63df4a18, 0xe51a3182, 0x97513360, 0x62537f45 +.word 0xb16477e0, 0xbb6bae84, 0xfe81a01c, 0xf9082b94 +.word 0x70486858, 0x8f45fd19, 0x94de6c87, 0x527bf8b7 +.word 0xab73d323, 0x724b02e2, 0xe31f8f57, 0x6655ab2a +.word 0xb2eb2807, 0x2fb5c203, 0x86c57b9a, 0xd33708a5 +.word 0x302887f2, 0x23bfa5b2, 0x02036aba, 0xed16825c +.word 0x8acf1c2b, 0xa779b492, 0xf307f2f0, 0x4e69e2a1 +.word 0x65daf4cd, 0x0605bed5, 0xd134621f, 0xc4a6fe8a +.word 0x342e539d, 0xa2f355a0, 0x058ae132, 0xa4f6eb75 +.word 0x0b83ec39, 0x4060efaa, 0x5e719f06, 0xbd6e1051 +.word 0x3e218af9, 0x96dd063d, 0xdd3e05ae, 0x4de6bd46 +.word 0x91548db5, 0x71c45d05, 0x0406d46f, 0x605015ff +.word 0x1998fb24, 0xd6bde997, 0x894043cc, 0x67d99e77 +.word 0xb0e842bd, 0x07898b88, 0xe7195b38, 0x79c8eedb +.word 0xa17c0a47, 0x7c420fe9, 0xf8841ec9, 0x00000000 +.word 0x09808683, 0x322bed48, 0x1e1170ac, 0x6c5a724e +.word 0xfd0efffb, 0x0f853856, 0x3daed51e, 0x362d3927 +.word 0x0a0fd964, 0x685ca621, 0x9b5b54d1, 0x24362e3a +.word 0x0c0a67b1, 0x9357e70f, 0xb4ee96d2, 0x1b9b919e +.word 0x80c0c54f, 0x61dc20a2, 0x5a774b69, 0x1c121a16 +.word 0xe293ba0a, 0xc0a02ae5, 0x3c22e043, 0x121b171d +.word 0x0e090d0b, 0xf28bc7ad, 0x2db6a8b9, 0x141ea9c8 +.word 0x57f11985, 0xaf75074c, 0xee99ddbb, 0xa37f60fd +.word 0xf701269f, 0x5c72f5bc, 0x44663bc5, 0x5bfb7e34 +.word 0x8b432976, 0xcb23c6dc, 0xb6edfc68, 0xb8e4f163 +.word 0xd731dcca, 0x42638510, 0x13972240, 0x84c61120 +.word 0x854a247d, 0xd2bb3df8, 0xaef93211, 0xc729a16d +.word 0x1d9e2f4b, 0xdcb230f3, 0x0d8652ec, 0x77c1e3d0 +.word 0x2bb3166c, 0xa970b999, 0x119448fa, 0x47e96422 +.word 0xa8fc8cc4, 0xa0f03f1a, 0x567d2cd8, 0x223390ef +.word 0x87494ec7, 0xd938d1c1, 0x8ccaa2fe, 0x98d40b36 +.word 0xa6f581cf, 0xa57ade28, 0xdab78e26, 0x3fadbfa4 +.word 0x2c3a9de4, 0x5078920d, 0x6a5fcc9b, 0x547e4662 +.word 0xf68d13c2, 0x90d8b8e8, 0x2e39f75e, 0x82c3aff5 +.word 0x9f5d80be, 0x69d0937c, 0x6fd52da9, 0xcf2512b3 +.word 0xc8ac993b, 0x10187da7, 0xe89c636e, 0xdb3bbb7b +.word 0xcd267809, 0x6e5918f4, 0xec9ab701, 0x834f9aa8 +.word 0xe6956e65, 0xaaffe67e, 0x21bccf08, 0xef15e8e6 +.word 0xbae79bd9, 0x4a6f36ce, 0xea9f09d4, 0x29b07cd6 +.word 0x31a4b2af, 0x2a3f2331, 0xc6a59430, 0x35a266c0 +.word 0x744ebc37, 0xfc82caa6, 0xe090d0b0, 0x33a7d815 +.word 0xf104984a, 0x41ecdaf7, 0x7fcd500e, 0x1791f62f +.word 0x764dd68d, 0x43efb04d, 0xccaa4d54, 0xe49604df +.word 0x9ed1b5e3, 0x4c6a881b, 0xc12c1fb8, 0x4665517f +.word 0x9d5eea04, 0x018c355d, 0xfa877473, 0xfb0b412e +.word 0xb3671d5a, 0x92dbd252, 0xe9105633, 0x6dd64713 +.word 0x9ad7618c, 0x37a10c7a, 0x59f8148e, 0xeb133c89 +.word 0xcea927ee, 0xb761c935, 0xe11ce5ed, 0x7a47b13c +.word 0x9cd2df59, 0x55f2733f, 0x1814ce79, 0x73c737bf +.word 0x53f7cdea, 0x5ffdaa5b, 0xdf3d6f14, 0x7844db86 +.word 0xcaaff381, 0xb968c43e, 0x3824342c, 0xc2a3405f +.word 0x161dc372, 0xbce2250c, 0x283c498b, 0xff0d9541 +.word 0x39a80171, 0x080cb3de, 0xd8b4e49c, 0x6456c190 +.word 0x7bcb8461, 0xd532b670, 0x486c5c74, 0xd0b85742 +@ Td4[256] +.byte 0x52, 0x09, 0x6a, 0xd5, 0x30, 0x36, 0xa5, 0x38 +.byte 0xbf, 0x40, 0xa3, 0x9e, 0x81, 0xf3, 0xd7, 0xfb +.byte 0x7c, 0xe3, 0x39, 0x82, 0x9b, 0x2f, 0xff, 0x87 +.byte 0x34, 0x8e, 0x43, 0x44, 0xc4, 0xde, 0xe9, 0xcb +.byte 0x54, 0x7b, 0x94, 0x32, 0xa6, 0xc2, 0x23, 0x3d +.byte 0xee, 0x4c, 0x95, 0x0b, 0x42, 0xfa, 0xc3, 0x4e +.byte 0x08, 0x2e, 0xa1, 0x66, 0x28, 0xd9, 0x24, 0xb2 +.byte 0x76, 0x5b, 0xa2, 0x49, 0x6d, 0x8b, 0xd1, 0x25 +.byte 0x72, 0xf8, 0xf6, 0x64, 0x86, 0x68, 0x98, 0x16 +.byte 0xd4, 0xa4, 0x5c, 0xcc, 0x5d, 0x65, 0xb6, 0x92 +.byte 0x6c, 0x70, 0x48, 0x50, 0xfd, 0xed, 0xb9, 0xda +.byte 0x5e, 0x15, 0x46, 0x57, 0xa7, 0x8d, 0x9d, 0x84 +.byte 0x90, 0xd8, 0xab, 0x00, 0x8c, 0xbc, 0xd3, 0x0a +.byte 0xf7, 0xe4, 0x58, 0x05, 0xb8, 0xb3, 0x45, 0x06 +.byte 0xd0, 0x2c, 0x1e, 0x8f, 0xca, 0x3f, 0x0f, 0x02 +.byte 0xc1, 0xaf, 0xbd, 0x03, 0x01, 0x13, 0x8a, 0x6b +.byte 0x3a, 0x91, 0x11, 0x41, 0x4f, 0x67, 0xdc, 0xea +.byte 0x97, 0xf2, 0xcf, 0xce, 0xf0, 0xb4, 0xe6, 0x73 +.byte 0x96, 0xac, 0x74, 0x22, 0xe7, 0xad, 0x35, 0x85 +.byte 0xe2, 0xf9, 0x37, 0xe8, 0x1c, 0x75, 0xdf, 0x6e +.byte 0x47, 0xf1, 0x1a, 0x71, 0x1d, 0x29, 0xc5, 0x89 +.byte 0x6f, 0xb7, 0x62, 0x0e, 0xaa, 0x18, 0xbe, 0x1b +.byte 0xfc, 0x56, 0x3e, 0x4b, 0xc6, 0xd2, 0x79, 0x20 +.byte 0x9a, 0xdb, 0xc0, 0xfe, 0x78, 0xcd, 0x5a, 0xf4 +.byte 0x1f, 0xdd, 0xa8, 0x33, 0x88, 0x07, 0xc7, 0x31 +.byte 0xb1, 0x12, 0x10, 0x59, 0x27, 0x80, 0xec, 0x5f +.byte 0x60, 0x51, 0x7f, 0xa9, 0x19, 0xb5, 0x4a, 0x0d +.byte 0x2d, 0xe5, 0x7a, 0x9f, 0x93, 0xc9, 0x9c, 0xef +.byte 0xa0, 0xe0, 0x3b, 0x4d, 0xae, 0x2a, 0xf5, 0xb0 +.byte 0xc8, 0xeb, 0xbb, 0x3c, 0x83, 0x53, 0x99, 0x61 +.byte 0x17, 0x2b, 0x04, 0x7e, 0xba, 0x77, 0xd6, 0x26 +.byte 0xe1, 0x69, 0x14, 0x63, 0x55, 0x21, 0x0c, 0x7d +.size AES_Td,.-AES_Td + +@ void AES_decrypt(const unsigned char *in, unsigned char *out, +@ const AES_KEY *key) { +.global AES_decrypt +.type AES_decrypt,%function +.align 5 +AES_decrypt: + sub r3,pc,#8 @ AES_decrypt + stmdb sp!,{r1,r4-r12,lr} + mov r12,r0 @ inp + mov r11,r2 + sub r10,r3,#AES_decrypt-AES_Td @ Td +#if __ARM_ARCH__<7 + ldrb r0,[r12,#3] @ load input data in endian-neutral + ldrb r4,[r12,#2] @ manner... + ldrb r5,[r12,#1] + ldrb r6,[r12,#0] + orr r0,r0,r4,lsl#8 + ldrb r1,[r12,#7] + orr r0,r0,r5,lsl#16 + ldrb r4,[r12,#6] + orr r0,r0,r6,lsl#24 + ldrb r5,[r12,#5] + ldrb r6,[r12,#4] + orr r1,r1,r4,lsl#8 + ldrb r2,[r12,#11] + orr r1,r1,r5,lsl#16 + ldrb r4,[r12,#10] + orr r1,r1,r6,lsl#24 + ldrb r5,[r12,#9] + ldrb r6,[r12,#8] + orr r2,r2,r4,lsl#8 + ldrb r3,[r12,#15] + orr r2,r2,r5,lsl#16 + ldrb r4,[r12,#14] + orr r2,r2,r6,lsl#24 + ldrb r5,[r12,#13] + ldrb r6,[r12,#12] + orr r3,r3,r4,lsl#8 + orr r3,r3,r5,lsl#16 + orr r3,r3,r6,lsl#24 +#else + ldr r0,[r12,#0] + ldr r1,[r12,#4] + ldr r2,[r12,#8] + ldr r3,[r12,#12] +#ifdef __ARMEL__ + rev r0,r0 + rev r1,r1 + rev r2,r2 + rev r3,r3 +#endif +#endif + bl _armv4_AES_decrypt + + ldr r12,[sp],#4 @ pop out +#if __ARM_ARCH__>=7 +#ifdef __ARMEL__ + rev r0,r0 + rev r1,r1 + rev r2,r2 + rev r3,r3 +#endif + str r0,[r12,#0] + str r1,[r12,#4] + str r2,[r12,#8] + str r3,[r12,#12] +#else + mov r4,r0,lsr#24 @ write output in endian-neutral + mov r5,r0,lsr#16 @ manner... + mov r6,r0,lsr#8 + strb r4,[r12,#0] + strb r5,[r12,#1] + mov r4,r1,lsr#24 + strb r6,[r12,#2] + mov r5,r1,lsr#16 + strb r0,[r12,#3] + mov r6,r1,lsr#8 + strb r4,[r12,#4] + strb r5,[r12,#5] + mov r4,r2,lsr#24 + strb r6,[r12,#6] + mov r5,r2,lsr#16 + strb r1,[r12,#7] + mov r6,r2,lsr#8 + strb r4,[r12,#8] + strb r5,[r12,#9] + mov r4,r3,lsr#24 + strb r6,[r12,#10] + mov r5,r3,lsr#16 + strb r2,[r12,#11] + mov r6,r3,lsr#8 + strb r4,[r12,#12] + strb r5,[r12,#13] + strb r6,[r12,#14] + strb r3,[r12,#15] +#endif +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r12,pc} +#else + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.size AES_decrypt,.-AES_decrypt + +.type _armv4_AES_decrypt,%function +.align 2 +_armv4_AES_decrypt: + str lr,[sp,#-4]! @ push lr + ldmia r11!,{r4-r7} + eor r0,r0,r4 + ldr r12,[r11,#240-16] + eor r1,r1,r5 + eor r2,r2,r6 + eor r3,r3,r7 + sub r12,r12,#1 + mov lr,#255 + + and r7,lr,r0,lsr#16 + and r8,lr,r0,lsr#8 + and r9,lr,r0 + mov r0,r0,lsr#24 +.Ldec_loop: + ldr r4,[r10,r7,lsl#2] @ Td1[s0>>16] + and r7,lr,r1 @ i0 + ldr r5,[r10,r8,lsl#2] @ Td2[s0>>8] + and r8,lr,r1,lsr#16 + ldr r6,[r10,r9,lsl#2] @ Td3[s0>>0] + and r9,lr,r1,lsr#8 + ldr r0,[r10,r0,lsl#2] @ Td0[s0>>24] + mov r1,r1,lsr#24 + + ldr r7,[r10,r7,lsl#2] @ Td3[s1>>0] + ldr r8,[r10,r8,lsl#2] @ Td1[s1>>16] + ldr r9,[r10,r9,lsl#2] @ Td2[s1>>8] + eor r0,r0,r7,ror#24 + ldr r1,[r10,r1,lsl#2] @ Td0[s1>>24] + and r7,lr,r2,lsr#8 @ i0 + eor r5,r8,r5,ror#8 + and r8,lr,r2 @ i1 + eor r6,r9,r6,ror#8 + and r9,lr,r2,lsr#16 + ldr r7,[r10,r7,lsl#2] @ Td2[s2>>8] + eor r1,r1,r4,ror#8 + ldr r8,[r10,r8,lsl#2] @ Td3[s2>>0] + mov r2,r2,lsr#24 + + ldr r9,[r10,r9,lsl#2] @ Td1[s2>>16] + eor r0,r0,r7,ror#16 + ldr r2,[r10,r2,lsl#2] @ Td0[s2>>24] + and r7,lr,r3,lsr#16 @ i0 + eor r1,r1,r8,ror#24 + and r8,lr,r3,lsr#8 @ i1 + eor r6,r9,r6,ror#8 + and r9,lr,r3 @ i2 + ldr r7,[r10,r7,lsl#2] @ Td1[s3>>16] + eor r2,r2,r5,ror#8 + ldr r8,[r10,r8,lsl#2] @ Td2[s3>>8] + mov r3,r3,lsr#24 + + ldr r9,[r10,r9,lsl#2] @ Td3[s3>>0] + eor r0,r0,r7,ror#8 + ldr r7,[r11],#16 + eor r1,r1,r8,ror#16 + ldr r3,[r10,r3,lsl#2] @ Td0[s3>>24] + eor r2,r2,r9,ror#24 + + ldr r4,[r11,#-12] + eor r0,r0,r7 + ldr r5,[r11,#-8] + eor r3,r3,r6,ror#8 + ldr r6,[r11,#-4] + and r7,lr,r0,lsr#16 + eor r1,r1,r4 + and r8,lr,r0,lsr#8 + eor r2,r2,r5 + and r9,lr,r0 + eor r3,r3,r6 + mov r0,r0,lsr#24 + + subs r12,r12,#1 + bne .Ldec_loop + + add r10,r10,#1024 + + ldr r5,[r10,#0] @ prefetch Td4 + ldr r6,[r10,#32] + ldr r4,[r10,#64] + ldr r5,[r10,#96] + ldr r6,[r10,#128] + ldr r4,[r10,#160] + ldr r5,[r10,#192] + ldr r6,[r10,#224] + + ldrb r0,[r10,r0] @ Td4[s0>>24] + ldrb r4,[r10,r7] @ Td4[s0>>16] + and r7,lr,r1 @ i0 + ldrb r5,[r10,r8] @ Td4[s0>>8] + and r8,lr,r1,lsr#16 + ldrb r6,[r10,r9] @ Td4[s0>>0] + and r9,lr,r1,lsr#8 + + ldrb r7,[r10,r7] @ Td4[s1>>0] + ldrb r1,[r10,r1,lsr#24] @ Td4[s1>>24] + ldrb r8,[r10,r8] @ Td4[s1>>16] + eor r0,r7,r0,lsl#24 + ldrb r9,[r10,r9] @ Td4[s1>>8] + eor r1,r4,r1,lsl#8 + and r7,lr,r2,lsr#8 @ i0 + eor r5,r5,r8,lsl#8 + and r8,lr,r2 @ i1 + ldrb r7,[r10,r7] @ Td4[s2>>8] + eor r6,r6,r9,lsl#8 + ldrb r8,[r10,r8] @ Td4[s2>>0] + and r9,lr,r2,lsr#16 + + ldrb r2,[r10,r2,lsr#24] @ Td4[s2>>24] + eor r0,r0,r7,lsl#8 + ldrb r9,[r10,r9] @ Td4[s2>>16] + eor r1,r8,r1,lsl#16 + and r7,lr,r3,lsr#16 @ i0 + eor r2,r5,r2,lsl#16 + and r8,lr,r3,lsr#8 @ i1 + ldrb r7,[r10,r7] @ Td4[s3>>16] + eor r6,r6,r9,lsl#16 + ldrb r8,[r10,r8] @ Td4[s3>>8] + and r9,lr,r3 @ i2 + + ldrb r9,[r10,r9] @ Td4[s3>>0] + ldrb r3,[r10,r3,lsr#24] @ Td4[s3>>24] + eor r0,r0,r7,lsl#16 + ldr r7,[r11,#0] + eor r1,r1,r8,lsl#8 + ldr r4,[r11,#4] + eor r2,r9,r2,lsl#8 + ldr r5,[r11,#8] + eor r3,r6,r3,lsl#24 + ldr r6,[r11,#12] + + eor r0,r0,r7 + eor r1,r1,r4 + eor r2,r2,r5 + eor r3,r3,r6 + + sub r10,r10,#1024 + ldr pc,[sp],#4 @ pop and return +.size _armv4_AES_decrypt,.-_armv4_AES_decrypt +.asciz "AES for ARMv4, CRYPTOGAMS by " +.align 2 diff --git a/arch/arm/crypto/aes_glue.c b/arch/arm/crypto/aes_glue.c new file mode 100644 index 0000000000000000000000000000000000000000..59f7877ead6ac9ee3f8a31b43c6e0458de26cd8f --- /dev/null +++ b/arch/arm/crypto/aes_glue.c @@ -0,0 +1,108 @@ +/* + * Glue Code for the asm optimized version of the AES Cipher Algorithm + */ + +#include +#include +#include + +#define AES_MAXNR 14 + +typedef struct { + unsigned int rd_key[4 *(AES_MAXNR + 1)]; + int rounds; +} AES_KEY; + +struct AES_CTX { + AES_KEY enc_key; + AES_KEY dec_key; +}; + +asmlinkage void AES_encrypt(const u8 *in, u8 *out, AES_KEY *ctx); +asmlinkage void AES_decrypt(const u8 *in, u8 *out, AES_KEY *ctx); +asmlinkage int private_AES_set_decrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key); +asmlinkage int private_AES_set_encrypt_key(const unsigned char *userKey, const int bits, AES_KEY *key); + +static void aes_encrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) +{ + struct AES_CTX *ctx = crypto_tfm_ctx(tfm); + AES_encrypt(src, dst, &ctx->enc_key); +} + +static void aes_decrypt(struct crypto_tfm *tfm, u8 *dst, const u8 *src) +{ + struct AES_CTX *ctx = crypto_tfm_ctx(tfm); + AES_decrypt(src, dst, &ctx->dec_key); +} + +static int aes_set_key(struct crypto_tfm *tfm, const u8 *in_key, + unsigned int key_len) +{ + struct AES_CTX *ctx = crypto_tfm_ctx(tfm); + + switch (key_len) { + case AES_KEYSIZE_128: + key_len = 128; + break; + case AES_KEYSIZE_192: + key_len = 192; + break; + case AES_KEYSIZE_256: + key_len = 256; + break; + default: + tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; + } + + if (private_AES_set_encrypt_key(in_key, key_len, &ctx->enc_key) == -1) { + tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; + } + /* private_AES_set_decrypt_key expects an encryption key as input */ + ctx->dec_key = ctx->enc_key; + if (private_AES_set_decrypt_key(in_key, key_len, &ctx->dec_key) == -1) { + tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; + } + return 0; +} + +static struct crypto_alg aes_alg = { + .cra_name = "aes", + .cra_driver_name = "aes-asm", + .cra_priority = 200, + .cra_flags = CRYPTO_ALG_TYPE_CIPHER, + .cra_blocksize = AES_BLOCK_SIZE, + .cra_ctxsize = sizeof(struct AES_CTX), + .cra_module = THIS_MODULE, + .cra_list = LIST_HEAD_INIT(aes_alg.cra_list), + .cra_u = { + .cipher = { + .cia_min_keysize = AES_MIN_KEY_SIZE, + .cia_max_keysize = AES_MAX_KEY_SIZE, + .cia_setkey = aes_set_key, + .cia_encrypt = aes_encrypt, + .cia_decrypt = aes_decrypt + } + } +}; + +static int __init aes_init(void) +{ + return crypto_register_alg(&aes_alg); +} + +static void __exit aes_fini(void) +{ + crypto_unregister_alg(&aes_alg); +} + +module_init(aes_init); +module_exit(aes_fini); + +MODULE_DESCRIPTION("Rijndael (AES) Cipher Algorithm (ASM)"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("aes"); +MODULE_ALIAS("aes-asm"); +MODULE_AUTHOR("David McCullough "); diff --git a/arch/arm/crypto/sha1-armv4-large.S b/arch/arm/crypto/sha1-armv4-large.S new file mode 100644 index 0000000000000000000000000000000000000000..7050ab133b9da66561d53f46f07f5974a16ccf7c --- /dev/null +++ b/arch/arm/crypto/sha1-armv4-large.S @@ -0,0 +1,503 @@ +#define __ARM_ARCH__ __LINUX_ARM_ARCH__ +@ ==================================================================== +@ Written by Andy Polyakov for the OpenSSL +@ project. The module is, however, dual licensed under OpenSSL and +@ CRYPTOGAMS licenses depending on where you obtain it. For further +@ details see http://www.openssl.org/~appro/cryptogams/. +@ ==================================================================== + +@ sha1_block procedure for ARMv4. +@ +@ January 2007. + +@ Size/performance trade-off +@ ==================================================================== +@ impl size in bytes comp cycles[*] measured performance +@ ==================================================================== +@ thumb 304 3212 4420 +@ armv4-small 392/+29% 1958/+64% 2250/+96% +@ armv4-compact 740/+89% 1552/+26% 1840/+22% +@ armv4-large 1420/+92% 1307/+19% 1370/+34%[***] +@ full unroll ~5100/+260% ~1260/+4% ~1300/+5% +@ ==================================================================== +@ thumb = same as 'small' but in Thumb instructions[**] and +@ with recurring code in two private functions; +@ small = detached Xload/update, loops are folded; +@ compact = detached Xload/update, 5x unroll; +@ large = interleaved Xload/update, 5x unroll; +@ full unroll = interleaved Xload/update, full unroll, estimated[!]; +@ +@ [*] Manually counted instructions in "grand" loop body. Measured +@ performance is affected by prologue and epilogue overhead, +@ i-cache availability, branch penalties, etc. +@ [**] While each Thumb instruction is twice smaller, they are not as +@ diverse as ARM ones: e.g., there are only two arithmetic +@ instructions with 3 arguments, no [fixed] rotate, addressing +@ modes are limited. As result it takes more instructions to do +@ the same job in Thumb, therefore the code is never twice as +@ small and always slower. +@ [***] which is also ~35% better than compiler generated code. Dual- +@ issue Cortex A8 core was measured to process input block in +@ ~990 cycles. + +@ August 2010. +@ +@ Rescheduling for dual-issue pipeline resulted in 13% improvement on +@ Cortex A8 core and in absolute terms ~870 cycles per input block +@ [or 13.6 cycles per byte]. + +@ February 2011. +@ +@ Profiler-assisted and platform-specific optimization resulted in 10% +@ improvement on Cortex A8 core and 12.2 cycles per byte. + +.text + +.global sha1_block_data_order +.type sha1_block_data_order,%function + +.align 2 +sha1_block_data_order: + stmdb sp!,{r4-r12,lr} + add r2,r1,r2,lsl#6 @ r2 to point at the end of r1 + ldmia r0,{r3,r4,r5,r6,r7} +.Lloop: + ldr r8,.LK_00_19 + mov r14,sp + sub sp,sp,#15*4 + mov r5,r5,ror#30 + mov r6,r6,ror#30 + mov r7,r7,ror#30 @ [6] +.L_00_15: +#if __ARM_ARCH__<7 + ldrb r10,[r1,#2] + ldrb r9,[r1,#3] + ldrb r11,[r1,#1] + add r7,r8,r7,ror#2 @ E+=K_00_19 + ldrb r12,[r1],#4 + orr r9,r9,r10,lsl#8 + eor r10,r5,r6 @ F_xx_xx + orr r9,r9,r11,lsl#16 + add r7,r7,r3,ror#27 @ E+=ROR(A,27) + orr r9,r9,r12,lsl#24 +#else + ldr r9,[r1],#4 @ handles unaligned + add r7,r8,r7,ror#2 @ E+=K_00_19 + eor r10,r5,r6 @ F_xx_xx + add r7,r7,r3,ror#27 @ E+=ROR(A,27) +#ifdef __ARMEL__ + rev r9,r9 @ byte swap +#endif +#endif + and r10,r4,r10,ror#2 + add r7,r7,r9 @ E+=X[i] + eor r10,r10,r6,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r7,r7,r10 @ E+=F_00_19(B,C,D) +#if __ARM_ARCH__<7 + ldrb r10,[r1,#2] + ldrb r9,[r1,#3] + ldrb r11,[r1,#1] + add r6,r8,r6,ror#2 @ E+=K_00_19 + ldrb r12,[r1],#4 + orr r9,r9,r10,lsl#8 + eor r10,r4,r5 @ F_xx_xx + orr r9,r9,r11,lsl#16 + add r6,r6,r7,ror#27 @ E+=ROR(A,27) + orr r9,r9,r12,lsl#24 +#else + ldr r9,[r1],#4 @ handles unaligned + add r6,r8,r6,ror#2 @ E+=K_00_19 + eor r10,r4,r5 @ F_xx_xx + add r6,r6,r7,ror#27 @ E+=ROR(A,27) +#ifdef __ARMEL__ + rev r9,r9 @ byte swap +#endif +#endif + and r10,r3,r10,ror#2 + add r6,r6,r9 @ E+=X[i] + eor r10,r10,r5,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r6,r6,r10 @ E+=F_00_19(B,C,D) +#if __ARM_ARCH__<7 + ldrb r10,[r1,#2] + ldrb r9,[r1,#3] + ldrb r11,[r1,#1] + add r5,r8,r5,ror#2 @ E+=K_00_19 + ldrb r12,[r1],#4 + orr r9,r9,r10,lsl#8 + eor r10,r3,r4 @ F_xx_xx + orr r9,r9,r11,lsl#16 + add r5,r5,r6,ror#27 @ E+=ROR(A,27) + orr r9,r9,r12,lsl#24 +#else + ldr r9,[r1],#4 @ handles unaligned + add r5,r8,r5,ror#2 @ E+=K_00_19 + eor r10,r3,r4 @ F_xx_xx + add r5,r5,r6,ror#27 @ E+=ROR(A,27) +#ifdef __ARMEL__ + rev r9,r9 @ byte swap +#endif +#endif + and r10,r7,r10,ror#2 + add r5,r5,r9 @ E+=X[i] + eor r10,r10,r4,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r5,r5,r10 @ E+=F_00_19(B,C,D) +#if __ARM_ARCH__<7 + ldrb r10,[r1,#2] + ldrb r9,[r1,#3] + ldrb r11,[r1,#1] + add r4,r8,r4,ror#2 @ E+=K_00_19 + ldrb r12,[r1],#4 + orr r9,r9,r10,lsl#8 + eor r10,r7,r3 @ F_xx_xx + orr r9,r9,r11,lsl#16 + add r4,r4,r5,ror#27 @ E+=ROR(A,27) + orr r9,r9,r12,lsl#24 +#else + ldr r9,[r1],#4 @ handles unaligned + add r4,r8,r4,ror#2 @ E+=K_00_19 + eor r10,r7,r3 @ F_xx_xx + add r4,r4,r5,ror#27 @ E+=ROR(A,27) +#ifdef __ARMEL__ + rev r9,r9 @ byte swap +#endif +#endif + and r10,r6,r10,ror#2 + add r4,r4,r9 @ E+=X[i] + eor r10,r10,r3,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r4,r4,r10 @ E+=F_00_19(B,C,D) +#if __ARM_ARCH__<7 + ldrb r10,[r1,#2] + ldrb r9,[r1,#3] + ldrb r11,[r1,#1] + add r3,r8,r3,ror#2 @ E+=K_00_19 + ldrb r12,[r1],#4 + orr r9,r9,r10,lsl#8 + eor r10,r6,r7 @ F_xx_xx + orr r9,r9,r11,lsl#16 + add r3,r3,r4,ror#27 @ E+=ROR(A,27) + orr r9,r9,r12,lsl#24 +#else + ldr r9,[r1],#4 @ handles unaligned + add r3,r8,r3,ror#2 @ E+=K_00_19 + eor r10,r6,r7 @ F_xx_xx + add r3,r3,r4,ror#27 @ E+=ROR(A,27) +#ifdef __ARMEL__ + rev r9,r9 @ byte swap +#endif +#endif + and r10,r5,r10,ror#2 + add r3,r3,r9 @ E+=X[i] + eor r10,r10,r7,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r3,r3,r10 @ E+=F_00_19(B,C,D) + teq r14,sp + bne .L_00_15 @ [((11+4)*5+2)*3] +#if __ARM_ARCH__<7 + ldrb r10,[r1,#2] + ldrb r9,[r1,#3] + ldrb r11,[r1,#1] + add r7,r8,r7,ror#2 @ E+=K_00_19 + ldrb r12,[r1],#4 + orr r9,r9,r10,lsl#8 + eor r10,r5,r6 @ F_xx_xx + orr r9,r9,r11,lsl#16 + add r7,r7,r3,ror#27 @ E+=ROR(A,27) + orr r9,r9,r12,lsl#24 +#else + ldr r9,[r1],#4 @ handles unaligned + add r7,r8,r7,ror#2 @ E+=K_00_19 + eor r10,r5,r6 @ F_xx_xx + add r7,r7,r3,ror#27 @ E+=ROR(A,27) +#ifdef __ARMEL__ + rev r9,r9 @ byte swap +#endif +#endif + and r10,r4,r10,ror#2 + add r7,r7,r9 @ E+=X[i] + eor r10,r10,r6,ror#2 @ F_00_19(B,C,D) + str r9,[r14,#-4]! + add r7,r7,r10 @ E+=F_00_19(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r6,r8,r6,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r4,r5 @ F_xx_xx + mov r9,r9,ror#31 + add r6,r6,r7,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r3,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r6,r6,r9 @ E+=X[i] + eor r10,r10,r5,ror#2 @ F_00_19(B,C,D) + add r6,r6,r10 @ E+=F_00_19(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r5,r8,r5,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r3,r4 @ F_xx_xx + mov r9,r9,ror#31 + add r5,r5,r6,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r7,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r5,r5,r9 @ E+=X[i] + eor r10,r10,r4,ror#2 @ F_00_19(B,C,D) + add r5,r5,r10 @ E+=F_00_19(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r4,r8,r4,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r7,r3 @ F_xx_xx + mov r9,r9,ror#31 + add r4,r4,r5,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r6,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r4,r4,r9 @ E+=X[i] + eor r10,r10,r3,ror#2 @ F_00_19(B,C,D) + add r4,r4,r10 @ E+=F_00_19(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r3,r8,r3,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r6,r7 @ F_xx_xx + mov r9,r9,ror#31 + add r3,r3,r4,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r5,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r3,r3,r9 @ E+=X[i] + eor r10,r10,r7,ror#2 @ F_00_19(B,C,D) + add r3,r3,r10 @ E+=F_00_19(B,C,D) + + ldr r8,.LK_20_39 @ [+15+16*4] + sub sp,sp,#25*4 + cmn sp,#0 @ [+3], clear carry to denote 20_39 +.L_20_39_or_60_79: + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r7,r8,r7,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r5,r6 @ F_xx_xx + mov r9,r9,ror#31 + add r7,r7,r3,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + eor r10,r4,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r7,r7,r9 @ E+=X[i] + add r7,r7,r10 @ E+=F_20_39(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r6,r8,r6,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r4,r5 @ F_xx_xx + mov r9,r9,ror#31 + add r6,r6,r7,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + eor r10,r3,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r6,r6,r9 @ E+=X[i] + add r6,r6,r10 @ E+=F_20_39(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r5,r8,r5,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r3,r4 @ F_xx_xx + mov r9,r9,ror#31 + add r5,r5,r6,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + eor r10,r7,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r5,r5,r9 @ E+=X[i] + add r5,r5,r10 @ E+=F_20_39(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r4,r8,r4,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r7,r3 @ F_xx_xx + mov r9,r9,ror#31 + add r4,r4,r5,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + eor r10,r6,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r4,r4,r9 @ E+=X[i] + add r4,r4,r10 @ E+=F_20_39(B,C,D) + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r3,r8,r3,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r6,r7 @ F_xx_xx + mov r9,r9,ror#31 + add r3,r3,r4,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + eor r10,r5,r10,ror#2 @ F_xx_xx + @ F_xx_xx + add r3,r3,r9 @ E+=X[i] + add r3,r3,r10 @ E+=F_20_39(B,C,D) + teq r14,sp @ preserve carry + bne .L_20_39_or_60_79 @ [+((12+3)*5+2)*4] + bcs .L_done @ [+((12+3)*5+2)*4], spare 300 bytes + + ldr r8,.LK_40_59 + sub sp,sp,#20*4 @ [+2] +.L_40_59: + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r7,r8,r7,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r5,r6 @ F_xx_xx + mov r9,r9,ror#31 + add r7,r7,r3,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r4,r10,ror#2 @ F_xx_xx + and r11,r5,r6 @ F_xx_xx + add r7,r7,r9 @ E+=X[i] + add r7,r7,r10 @ E+=F_40_59(B,C,D) + add r7,r7,r11,ror#2 + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r6,r8,r6,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r4,r5 @ F_xx_xx + mov r9,r9,ror#31 + add r6,r6,r7,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r3,r10,ror#2 @ F_xx_xx + and r11,r4,r5 @ F_xx_xx + add r6,r6,r9 @ E+=X[i] + add r6,r6,r10 @ E+=F_40_59(B,C,D) + add r6,r6,r11,ror#2 + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r5,r8,r5,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r3,r4 @ F_xx_xx + mov r9,r9,ror#31 + add r5,r5,r6,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r7,r10,ror#2 @ F_xx_xx + and r11,r3,r4 @ F_xx_xx + add r5,r5,r9 @ E+=X[i] + add r5,r5,r10 @ E+=F_40_59(B,C,D) + add r5,r5,r11,ror#2 + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r4,r8,r4,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r7,r3 @ F_xx_xx + mov r9,r9,ror#31 + add r4,r4,r5,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r6,r10,ror#2 @ F_xx_xx + and r11,r7,r3 @ F_xx_xx + add r4,r4,r9 @ E+=X[i] + add r4,r4,r10 @ E+=F_40_59(B,C,D) + add r4,r4,r11,ror#2 + ldr r9,[r14,#15*4] + ldr r10,[r14,#13*4] + ldr r11,[r14,#7*4] + add r3,r8,r3,ror#2 @ E+=K_xx_xx + ldr r12,[r14,#2*4] + eor r9,r9,r10 + eor r11,r11,r12 @ 1 cycle stall + eor r10,r6,r7 @ F_xx_xx + mov r9,r9,ror#31 + add r3,r3,r4,ror#27 @ E+=ROR(A,27) + eor r9,r9,r11,ror#31 + str r9,[r14,#-4]! + and r10,r5,r10,ror#2 @ F_xx_xx + and r11,r6,r7 @ F_xx_xx + add r3,r3,r9 @ E+=X[i] + add r3,r3,r10 @ E+=F_40_59(B,C,D) + add r3,r3,r11,ror#2 + teq r14,sp + bne .L_40_59 @ [+((12+5)*5+2)*4] + + ldr r8,.LK_60_79 + sub sp,sp,#20*4 + cmp sp,#0 @ set carry to denote 60_79 + b .L_20_39_or_60_79 @ [+4], spare 300 bytes +.L_done: + add sp,sp,#80*4 @ "deallocate" stack frame + ldmia r0,{r8,r9,r10,r11,r12} + add r3,r8,r3 + add r4,r9,r4 + add r5,r10,r5,ror#2 + add r6,r11,r6,ror#2 + add r7,r12,r7,ror#2 + stmia r0,{r3,r4,r5,r6,r7} + teq r1,r2 + bne .Lloop @ [+18], total 1307 + +#if __ARM_ARCH__>=5 + ldmia sp!,{r4-r12,pc} +#else + ldmia sp!,{r4-r12,lr} + tst lr,#1 + moveq pc,lr @ be binary compatible with V4, yet + .word 0xe12fff1e @ interoperable with Thumb ISA:-) +#endif +.align 2 +.LK_00_19: .word 0x5a827999 +.LK_20_39: .word 0x6ed9eba1 +.LK_40_59: .word 0x8f1bbcdc +.LK_60_79: .word 0xca62c1d6 +.size sha1_block_data_order,.-sha1_block_data_order +.asciz "SHA1 block transform for ARMv4, CRYPTOGAMS by " +.align 2 diff --git a/arch/arm/crypto/sha1_glue.c b/arch/arm/crypto/sha1_glue.c new file mode 100644 index 0000000000000000000000000000000000000000..76cd976230bc4b7558c18a50daaa5278fe85565f --- /dev/null +++ b/arch/arm/crypto/sha1_glue.c @@ -0,0 +1,179 @@ +/* + * Cryptographic API. + * Glue code for the SHA1 Secure Hash Algorithm assembler implementation + * + * This file is based on sha1_generic.c and sha1_ssse3_glue.c + * + * Copyright (c) Alan Smithee. + * Copyright (c) Andrew McDonald + * Copyright (c) Jean-Francois Dive + * Copyright (c) Mathias Krause + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; either version 2 of the License, or (at your option) + * any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include + +struct SHA1_CTX { + uint32_t h0,h1,h2,h3,h4; + u64 count; + u8 data[SHA1_BLOCK_SIZE]; +}; + +asmlinkage void sha1_block_data_order(struct SHA1_CTX *digest, + const unsigned char *data, unsigned int rounds); + + +static int sha1_init(struct shash_desc *desc) +{ + struct SHA1_CTX *sctx = shash_desc_ctx(desc); + memset(sctx, 0, sizeof(*sctx)); + sctx->h0 = SHA1_H0; + sctx->h1 = SHA1_H1; + sctx->h2 = SHA1_H2; + sctx->h3 = SHA1_H3; + sctx->h4 = SHA1_H4; + return 0; +} + + +static int __sha1_update(struct SHA1_CTX *sctx, const u8 *data, + unsigned int len, unsigned int partial) +{ + unsigned int done = 0; + + sctx->count += len; + + if (partial) { + done = SHA1_BLOCK_SIZE - partial; + memcpy(sctx->data + partial, data, done); + sha1_block_data_order(sctx, sctx->data, 1); + } + + if (len - done >= SHA1_BLOCK_SIZE) { + const unsigned int rounds = (len - done) / SHA1_BLOCK_SIZE; + sha1_block_data_order(sctx, data + done, rounds); + done += rounds * SHA1_BLOCK_SIZE; + } + + memcpy(sctx->data, data + done, len - done); + return 0; +} + + +static int sha1_update(struct shash_desc *desc, const u8 *data, + unsigned int len) +{ + struct SHA1_CTX *sctx = shash_desc_ctx(desc); + unsigned int partial = sctx->count % SHA1_BLOCK_SIZE; + int res; + + /* Handle the fast case right here */ + if (partial + len < SHA1_BLOCK_SIZE) { + sctx->count += len; + memcpy(sctx->data + partial, data, len); + return 0; + } + res = __sha1_update(sctx, data, len, partial); + return res; +} + + +/* Add padding and return the message digest. */ +static int sha1_final(struct shash_desc *desc, u8 *out) +{ + struct SHA1_CTX *sctx = shash_desc_ctx(desc); + unsigned int i, index, padlen; + __be32 *dst = (__be32 *)out; + __be64 bits; + static const u8 padding[SHA1_BLOCK_SIZE] = { 0x80, }; + + bits = cpu_to_be64(sctx->count << 3); + + /* Pad out to 56 mod 64 and append length */ + index = sctx->count % SHA1_BLOCK_SIZE; + padlen = (index < 56) ? (56 - index) : ((SHA1_BLOCK_SIZE+56) - index); + /* We need to fill a whole block for __sha1_update() */ + if (padlen <= 56) { + sctx->count += padlen; + memcpy(sctx->data + index, padding, padlen); + } else { + __sha1_update(sctx, padding, padlen, index); + } + __sha1_update(sctx, (const u8 *)&bits, sizeof(bits), 56); + + /* Store state in digest */ + for (i = 0; i < 5; i++) + dst[i] = cpu_to_be32(((u32 *)sctx)[i]); + + /* Wipe context */ + memset(sctx, 0, sizeof(*sctx)); + return 0; +} + + +static int sha1_export(struct shash_desc *desc, void *out) +{ + struct SHA1_CTX *sctx = shash_desc_ctx(desc); + memcpy(out, sctx, sizeof(*sctx)); + return 0; +} + + +static int sha1_import(struct shash_desc *desc, const void *in) +{ + struct SHA1_CTX *sctx = shash_desc_ctx(desc); + memcpy(sctx, in, sizeof(*sctx)); + return 0; +} + + +static struct shash_alg alg = { + .digestsize = SHA1_DIGEST_SIZE, + .init = sha1_init, + .update = sha1_update, + .final = sha1_final, + .export = sha1_export, + .import = sha1_import, + .descsize = sizeof(struct SHA1_CTX), + .statesize = sizeof(struct SHA1_CTX), + .base = { + .cra_name = "sha1", + .cra_driver_name= "sha1-asm", + .cra_priority = 150, + .cra_flags = CRYPTO_ALG_TYPE_SHASH, + .cra_blocksize = SHA1_BLOCK_SIZE, + .cra_module = THIS_MODULE, + } +}; + + +static int __init sha1_mod_init(void) +{ + return crypto_register_shash(&alg); +} + + +static void __exit sha1_mod_fini(void) +{ + crypto_unregister_shash(&alg); +} + + +module_init(sha1_mod_init); +module_exit(sha1_mod_fini); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("SHA1 Secure Hash Algorithm (ARM)"); +MODULE_ALIAS("sha1"); +MODULE_AUTHOR("David McCullough "); diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 960abceb8e14dd878fd7b5cf979a3c318021f0f4..f70ae175a3d6414b2edb2ef9c717b07038d0d117 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -1,20 +1,35 @@ -include include/asm-generic/Kbuild.asm -header-y += hwcap.h generic-y += auxvec.h generic-y += bitsperlong.h generic-y += cputime.h +generic-y += current.h generic-y += emergency-restart.h generic-y += errno.h +generic-y += exec.h generic-y += ioctl.h +generic-y += ipcbuf.h generic-y += irq_regs.h generic-y += kdebug.h generic-y += local.h generic-y += local64.h +generic-y += msgbuf.h +generic-y += param.h +generic-y += parport.h generic-y += percpu.h generic-y += poll.h generic-y += resource.h generic-y += sections.h +generic-y += segment.h +generic-y += sembuf.h +generic-y += serial.h +generic-y += shmbuf.h generic-y += siginfo.h generic-y += sizes.h +generic-y += socket.h +generic-y += sockios.h +generic-y += termbits.h +generic-y += termios.h +generic-y += timex.h +generic-y += types.h +generic-y += unaligned.h diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index 62e75475e57eaa804f209585673eb20e4b776437..d40229d9a1c98f839e1cf52e359502babea2c5dd 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -2,11 +2,12 @@ #define __ASMARM_ARCH_TIMER_H #include +#include #ifdef CONFIG_ARM_ARCH_TIMER -#define ARCH_HAS_READ_CURRENT_TIMER int arch_timer_of_register(void); int arch_timer_sched_clock_init(void); +struct timecounter *arch_timer_get_timecounter(void); #else static inline int arch_timer_of_register(void) { @@ -17,6 +18,11 @@ static inline int arch_timer_sched_clock_init(void) { return -ENXIO; } + +static inline struct timecounter *arch_timer_get_timecounter(void) +{ + return NULL; +} #endif #endif diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 5c8b3bf4d8252f1013af6fea25848ce9c41dcfeb..2ef95813fce00b887dbd05020b35675870a7c929 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -22,6 +22,7 @@ #include #include +#include #define IOMEM(x) (x) @@ -239,6 +240,34 @@ .endm #endif +/* + * Helper macro to enter SVC mode cleanly and mask interrupts. reg is + * a scratch register for the macro to overwrite. + * + * This macro is intended for forcing the CPU into SVC mode at boot time. + * you cannot return to the original mode. + * + * Beware, it also clobers LR. + */ +.macro safe_svcmode_maskall reg:req + mrs \reg , cpsr + mov lr , \reg + and lr , lr , #MODE_MASK + cmp lr , #HYP_MODE + orr \reg , \reg , #PSR_I_BIT | PSR_F_BIT + bic \reg , \reg , #MODE_MASK + orr \reg , \reg , #SVC_MODE +THUMB( orr \reg , \reg , #PSR_T_BIT ) + bne 1f + orr \reg, \reg, #PSR_A_BIT + adr lr, BSYM(2f) + msr spsr_cxsf, \reg + __MSR_ELR_HYP(14) + __ERET +1: msr cpsr_c, \reg +2: +.endm + /* * STRT/LDRT access macros with ARM and Thumb-2 variants */ diff --git a/arch/arm/include/asm/barrier.h b/arch/arm/include/asm/barrier.h index 05112380dc5398dd47cbd9fb6adf564f96a4c94c..8dcd9c702d90c9c352d85595d0ea8f83a42f215e 100644 --- a/arch/arm/include/asm/barrier.h +++ b/arch/arm/include/asm/barrier.h @@ -44,10 +44,9 @@ #define rmb() dsb() #define wmb() mb() #else -#include -#define mb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#define rmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) -#define wmb() do { if (arch_is_coherent()) dmb(); else barrier(); } while (0) +#define mb() barrier() +#define rmb() barrier() +#define wmb() barrier() #endif #ifndef CONFIG_SMP diff --git a/arch/arm/include/asm/cacheflush.h b/arch/arm/include/asm/cacheflush.h index e4448e16046dd32ab69ca17ef65a6b21745a3e0b..e1489c54cd12b4dcb8b997e8e327e2875b183b0c 100644 --- a/arch/arm/include/asm/cacheflush.h +++ b/arch/arm/include/asm/cacheflush.h @@ -49,6 +49,13 @@ * * Unconditionally clean and invalidate the entire cache. * + * flush_kern_louis() + * + * Flush data cache levels up to the level of unification + * inner shareable and invalidate the I-cache. + * Only needed from v7 onwards, falls back to flush_cache_all() + * for all other processor versions. + * * flush_user_all() * * Clean and invalidate all user space cache entries @@ -97,6 +104,7 @@ struct cpu_cache_fns { void (*flush_icache_all)(void); void (*flush_kern_all)(void); + void (*flush_kern_louis)(void); void (*flush_user_all)(void); void (*flush_user_range)(unsigned long, unsigned long, unsigned int); @@ -119,6 +127,7 @@ extern struct cpu_cache_fns cpu_cache; #define __cpuc_flush_icache_all cpu_cache.flush_icache_all #define __cpuc_flush_kern_all cpu_cache.flush_kern_all +#define __cpuc_flush_kern_louis cpu_cache.flush_kern_louis #define __cpuc_flush_user_all cpu_cache.flush_user_all #define __cpuc_flush_user_range cpu_cache.flush_user_range #define __cpuc_coherent_kern_range cpu_cache.coherent_kern_range @@ -139,6 +148,7 @@ extern struct cpu_cache_fns cpu_cache; extern void __cpuc_flush_icache_all(void); extern void __cpuc_flush_kern_all(void); +extern void __cpuc_flush_kern_louis(void); extern void __cpuc_flush_user_all(void); extern void __cpuc_flush_user_range(unsigned long, unsigned long, unsigned int); extern void __cpuc_coherent_kern_range(unsigned long, unsigned long); @@ -204,6 +214,11 @@ static inline void __flush_icache_all(void) __flush_icache_preferred(); } +/* + * Flush caches up to Level of Unification Inner Shareable + */ +#define flush_cache_louis() __cpuc_flush_kern_louis() + #define flush_cache_all() __cpuc_flush_kern_all() static inline void vivt_flush_cache_mm(struct mm_struct *mm) diff --git a/arch/arm/include/asm/current.h b/arch/arm/include/asm/current.h deleted file mode 100644 index 75d21e2a3ff7b2b02d122ac1a08b0155cd86dd1b..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/current.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ASMARM_CURRENT_H -#define _ASMARM_CURRENT_H - -#include - -static inline struct task_struct *get_current(void) __attribute_const__; - -static inline struct task_struct *get_current(void) -{ - return current_thread_info()->task; -} - -#define current (get_current()) - -#endif /* _ASMARM_CURRENT_H */ diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h index dc6145120de32d8e1d583f45bbef878365a752e5..ab98fdd083bd35064c8e10d04ec041e21c694432 100644 --- a/arch/arm/include/asm/delay.h +++ b/arch/arm/include/asm/delay.h @@ -15,6 +15,11 @@ #ifndef __ASSEMBLY__ +struct delay_timer { + unsigned long (*read_current_timer)(void); + unsigned long freq; +}; + extern struct arm_delay_ops { void (*delay)(unsigned long); void (*const_udelay)(unsigned long); @@ -56,6 +61,10 @@ extern void __loop_delay(unsigned long loops); extern void __loop_udelay(unsigned long usecs); extern void __loop_const_udelay(unsigned long); +/* Delay-loop timer registration. */ +#define ARCH_HAS_READ_CURRENT_TIMER +extern void register_current_timer_delay(const struct delay_timer *timer); + #endif /* __ASSEMBLY__ */ #endif /* defined(_ARM_DELAY_H) */ diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 5c44dcb0987bd31418298f7932baaa5a82320477..23004847bb057becd348b5d1e870235b633acedd 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -13,6 +13,7 @@ #define DMA_ERROR_CODE (~0) extern struct dma_map_ops arm_dma_ops; +extern struct dma_map_ops arm_coherent_dma_ops; static inline struct dma_map_ops *get_dma_ops(struct device *dev) { diff --git a/arch/arm/include/asm/exec.h b/arch/arm/include/asm/exec.h deleted file mode 100644 index 7c4fbef72b3a2d444ea4b2d618cc322be5ffc18c..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/exec.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARM_EXEC_H -#define __ASM_ARM_EXEC_H - -#define arch_align_stack(x) (x) - -#endif /* __ASM_ARM_EXEC_H */ diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index 7e30874377e67bede33d1f4a047bfc4f1de65fc0..cca9f15704ed82bb2726ce8898611be42d28b5ff 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -110,19 +110,19 @@ #endif #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) -//# ifdef _CACHE +# ifdef _CACHE # define MULTI_CACHE 1 -//# else -//# define _CACHE v6 -//# endif +# else +# define _CACHE v6 +# endif #endif #if defined(CONFIG_CPU_V7) -//# ifdef _CACHE +# ifdef _CACHE # define MULTI_CACHE 1 -//# else -//# define _CACHE v7 -//# endif +# else +# define _CACHE v7 +# endif #endif #if !defined(_CACHE) && !defined(MULTI_CACHE) @@ -132,6 +132,7 @@ #ifndef MULTI_CACHE #define __cpuc_flush_icache_all __glue(_CACHE,_flush_icache_all) #define __cpuc_flush_kern_all __glue(_CACHE,_flush_kern_cache_all) +#define __cpuc_flush_kern_louis __glue(_CACHE,_flush_kern_cache_louis) #define __cpuc_flush_user_all __glue(_CACHE,_flush_user_cache_all) #define __cpuc_flush_user_range __glue(_CACHE,_flush_user_cache_range) #define __cpuc_coherent_kern_range __glue(_CACHE,_coherent_kern_range) diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h index 436e60b2cf7a1bad5893ef33e3efac1791cb7ef5..2740c2a2df639361617f6fe484ead14f8625eaf2 100644 --- a/arch/arm/include/asm/hardirq.h +++ b/arch/arm/include/asm/hardirq.h @@ -5,7 +5,7 @@ #include #include -#define NR_IPI 5 +#define NR_IPI 6 typedef struct { unsigned int __softirq_pending; diff --git a/arch/arm/include/asm/hardware/linkup-l1110.h b/arch/arm/include/asm/hardware/linkup-l1110.h deleted file mode 100644 index 7ec91168a576701f0023327a0ccc77d313455925..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/hardware/linkup-l1110.h +++ /dev/null @@ -1,48 +0,0 @@ -/* -* -* Definitions for H3600 Handheld Computer -* -* Copyright 2001 Compaq Computer Corporation. -* -* Use consistent with the GNU GPL is permitted, -* provided that this copyright notice is -* preserved in its entirety in all copies and derived works. -* -* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, -* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS -* FITNESS FOR ANY PARTICULAR PURPOSE. -* -* Author: Jamey Hicks. -* -*/ - -/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */ - -/* PC Card Status Register */ -#define LINKUP_PRS_S1 (1 << 0) /* voltage control bits S1-S4 */ -#define LINKUP_PRS_S2 (1 << 1) -#define LINKUP_PRS_S3 (1 << 2) -#define LINKUP_PRS_S4 (1 << 3) -#define LINKUP_PRS_BVD1 (1 << 4) -#define LINKUP_PRS_BVD2 (1 << 5) -#define LINKUP_PRS_VS1 (1 << 6) -#define LINKUP_PRS_VS2 (1 << 7) -#define LINKUP_PRS_RDY (1 << 8) -#define LINKUP_PRS_CD1 (1 << 9) -#define LINKUP_PRS_CD2 (1 << 10) - -/* PC Card Command Register */ -#define LINKUP_PRC_S1 (1 << 0) -#define LINKUP_PRC_S2 (1 << 1) -#define LINKUP_PRC_S3 (1 << 2) -#define LINKUP_PRC_S4 (1 << 3) -#define LINKUP_PRC_RESET (1 << 4) -#define LINKUP_PRC_APOE (1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */ -#define LINKUP_PRC_CFE (1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */ -#define LINKUP_PRC_SOE (1 << 7) /* signal output driver enable */ -#define LINKUP_PRC_SSP (1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */ -#define LINKUP_PRC_MBZ (1 << 15) /* must be zero */ - -struct linkup_l1110 { - volatile short prc; -}; diff --git a/arch/arm/include/asm/hwcap.h b/arch/arm/include/asm/hwcap.h index 917626128a1da7d326f6816ae63c1495a0290bc3..6ff56eca3f1f98ac5215aa0b3274f310ffbf0f7b 100644 --- a/arch/arm/include/asm/hwcap.h +++ b/arch/arm/include/asm/hwcap.h @@ -1,31 +1,8 @@ #ifndef __ASMARM_HWCAP_H #define __ASMARM_HWCAP_H -/* - * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP - */ -#define HWCAP_SWP (1 << 0) -#define HWCAP_HALF (1 << 1) -#define HWCAP_THUMB (1 << 2) -#define HWCAP_26BIT (1 << 3) /* Play it safe */ -#define HWCAP_FAST_MULT (1 << 4) -#define HWCAP_FPA (1 << 5) -#define HWCAP_VFP (1 << 6) -#define HWCAP_EDSP (1 << 7) -#define HWCAP_JAVA (1 << 8) -#define HWCAP_IWMMXT (1 << 9) -#define HWCAP_CRUNCH (1 << 10) -#define HWCAP_THUMBEE (1 << 11) -#define HWCAP_NEON (1 << 12) -#define HWCAP_VFPv3 (1 << 13) -#define HWCAP_VFPv3D16 (1 << 14) -#define HWCAP_TLS (1 << 15) -#define HWCAP_VFPv4 (1 << 16) -#define HWCAP_IDIVA (1 << 17) -#define HWCAP_IDIVT (1 << 18) -#define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT) +#include -#if defined(__KERNEL__) #if !defined(__ASSEMBLY__) /* * This yields a mask that user programs can use to figure out what @@ -35,5 +12,3 @@ extern unsigned int elf_hwcap; #endif #endif - -#endif diff --git a/arch/arm/include/asm/hypervisor.h b/arch/arm/include/asm/hypervisor.h new file mode 100644 index 0000000000000000000000000000000000000000..b90d9e523d6f218663dcc7a54a48def5c8dae7c4 --- /dev/null +++ b/arch/arm/include/asm/hypervisor.h @@ -0,0 +1,6 @@ +#ifndef _ASM_ARM_HYPERVISOR_H +#define _ASM_ARM_HYPERVISOR_H + +#include + +#endif diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 8f4db67533e5a7bf937ce94396e6b7bd19367036..35c1ed89b93652688dc99ede919b55b0d5051b1d 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -47,13 +47,68 @@ extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen); extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); -#define __raw_writeb(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned char __force *)(a) = (v))) -#define __raw_writew(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))) -#define __raw_writel(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned int __force *)(a) = (v))) +#if __LINUX_ARM_ARCH__ < 6 +/* + * Half-word accesses are problematic with RiscPC due to limitations of + * the bus. Rather than special-case the machine, just let the compiler + * generate the access for CPUs prior to ARMv6. + */ +#define __raw_readw(a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a)) +#define __raw_writew(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))) +#else +/* + * When running under a hypervisor, we want to avoid I/O accesses with + * writeback addressing modes as these incur a significant performance + * overhead (the address generation must be emulated in software). + */ +static inline void __raw_writew(u16 val, volatile void __iomem *addr) +{ + asm volatile("strh %1, %0" + : "+Qo" (*(volatile u16 __force *)addr) + : "r" (val)); +} + +static inline u16 __raw_readw(const volatile void __iomem *addr) +{ + u16 val; + asm volatile("ldrh %1, %0" + : "+Qo" (*(volatile u16 __force *)addr), + "=r" (val)); + return val; +} +#endif -#define __raw_readb(a) (__chk_io_ptr(a), *(volatile unsigned char __force *)(a)) -#define __raw_readw(a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a)) -#define __raw_readl(a) (__chk_io_ptr(a), *(volatile unsigned int __force *)(a)) +static inline void __raw_writeb(u8 val, volatile void __iomem *addr) +{ + asm volatile("strb %1, %0" + : "+Qo" (*(volatile u8 __force *)addr) + : "r" (val)); +} + +static inline void __raw_writel(u32 val, volatile void __iomem *addr) +{ + asm volatile("str %1, %0" + : "+Qo" (*(volatile u32 __force *)addr) + : "r" (val)); +} + +static inline u8 __raw_readb(const volatile void __iomem *addr) +{ + u8 val; + asm volatile("ldrb %1, %0" + : "+Qo" (*(volatile u8 __force *)addr), + "=r" (val)); + return val; +} + +static inline u32 __raw_readl(const volatile void __iomem *addr) +{ + u32 val; + asm volatile("ldr %1, %0" + : "+Qo" (*(volatile u32 __force *)addr), + "=r" (val)); + return val; +} /* * Architecture ioremap implementation. diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 5f6ddcc56452998f40b1c16d7e20a0ff1ec010bd..73cf03aa981e1b665d9a40f4f80847335ca49441 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -275,14 +275,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x) #define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT) #define virt_addr_valid(kaddr) ((unsigned long)(kaddr) >= PAGE_OFFSET && (unsigned long)(kaddr) < (unsigned long)high_memory) -/* - * Optional coherency support. Currently used only by selected - * Intel XSC3-based systems. - */ -#ifndef arch_is_coherent -#define arch_is_coherent() 0 -#endif - #endif #include diff --git a/arch/arm/include/asm/module.h b/arch/arm/include/asm/module.h index 6c6809f982f12557a6fa23a711f095c9a122fdb0..0d3a28dbc8e5db05823e6b83f85ccc5d04b807ac 100644 --- a/arch/arm/include/asm/module.h +++ b/arch/arm/include/asm/module.h @@ -1,9 +1,7 @@ #ifndef _ASM_ARM_MODULE_H #define _ASM_ARM_MODULE_H -#define Elf_Shdr Elf32_Shdr -#define Elf_Sym Elf32_Sym -#define Elf_Ehdr Elf32_Ehdr +#include struct unwind_table; @@ -16,13 +14,11 @@ enum { ARM_SEC_DEVEXIT, ARM_SEC_MAX, }; -#endif struct mod_arch_specific { -#ifdef CONFIG_ARM_UNWIND struct unwind_table *unwind[ARM_SEC_MAX]; -#endif }; +#endif /* * Add the ARM architecture version to the version magic string diff --git a/arch/arm/include/asm/msgbuf.h b/arch/arm/include/asm/msgbuf.h deleted file mode 100644 index 33b35b946eaaea5e4b4b74c6da35a918f7c6a6a6..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ASMARM_MSGBUF_H -#define _ASMARM_MSGBUF_H - -/* - * The msqid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASMARM_MSGBUF_H */ diff --git a/arch/arm/include/asm/mutex.h b/arch/arm/include/asm/mutex.h index b1479fd04a951f1d82d55f77fd01cb9f0b072f38..87c044910fe0a2274cc7198cdcbe00ca76d05795 100644 --- a/arch/arm/include/asm/mutex.h +++ b/arch/arm/include/asm/mutex.h @@ -9,8 +9,13 @@ #define _ASM_MUTEX_H /* * On pre-ARMv6 hardware this results in a swp-based implementation, - * which is the most efficient. For ARMv6+, we emit a pair of exclusive - * accesses instead. + * which is the most efficient. For ARMv6+, we have exclusive memory + * accessors and use atomic_dec to avoid the extra xchg operations + * on the locking slowpaths. */ +#if __LINUX_ARM_ARCH__ < 6 #include +#else +#include #endif +#endif /* _ASM_MUTEX_H */ diff --git a/arch/arm/include/asm/opcodes-virt.h b/arch/arm/include/asm/opcodes-virt.h new file mode 100644 index 0000000000000000000000000000000000000000..efcfdf92d9d5991ac618bf2ae608be27c44dc493 --- /dev/null +++ b/arch/arm/include/asm/opcodes-virt.h @@ -0,0 +1,39 @@ +/* + * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions + * Copyright (C) 2012 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef __ASM_ARM_OPCODES_VIRT_H +#define __ASM_ARM_OPCODES_VIRT_H + +#include + +#define __HVC(imm16) __inst_arm_thumb32( \ + 0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) & 0x000F), \ + 0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF) \ +) + +#define __ERET __inst_arm_thumb32( \ + 0xE160006E, \ + 0xF3DE8F00 \ +) + +#define __MSR_ELR_HYP(regnum) __inst_arm_thumb32( \ + 0xE12EF300 | regnum, \ + 0xF3808E30 | (regnum << 16) \ +) + +#endif /* ! __ASM_ARM_OPCODES_VIRT_H */ diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h index 19c48deda70f1b759b94b3a852dc0b4f207adfd8..74e211a6fb2442b1e35750065923a148e63e37e3 100644 --- a/arch/arm/include/asm/opcodes.h +++ b/arch/arm/include/asm/opcodes.h @@ -18,6 +18,33 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); #define ARM_OPCODE_CONDTEST_UNCOND 2 +/* + * Assembler opcode byteswap helpers. + * These are only intended for use by this header: don't use them directly, + * because they will be suboptimal in most cases. + */ +#define ___asm_opcode_swab32(x) ( \ + (((x) << 24) & 0xFF000000) \ + | (((x) << 8) & 0x00FF0000) \ + | (((x) >> 8) & 0x0000FF00) \ + | (((x) >> 24) & 0x000000FF) \ +) +#define ___asm_opcode_swab16(x) ( \ + (((x) << 8) & 0xFF00) \ + | (((x) >> 8) & 0x00FF) \ +) +#define ___asm_opcode_swahb32(x) ( \ + (((x) << 8) & 0xFF00FF00) \ + | (((x) >> 8) & 0x00FF00FF) \ +) +#define ___asm_opcode_swahw32(x) ( \ + (((x) << 16) & 0xFFFF0000) \ + | (((x) >> 16) & 0x0000FFFF) \ +) +#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF) +#define ___asm_opcode_identity16(x) ((x) & 0xFFFF) + + /* * Opcode byteswap helpers * @@ -41,39 +68,163 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not * represent any valid Thumb-2 instruction. For this range, * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false. + * + * The ___asm variants are intended only for use by this header, in situations + * involving inline assembler. For .S files, the normal __opcode_*() macros + * should do the right thing. */ +#ifdef __ASSEMBLY__ -#ifndef __ASSEMBLY__ +#define ___opcode_swab32(x) ___asm_opcode_swab32(x) +#define ___opcode_swab16(x) ___asm_opcode_swab16(x) +#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x) +#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x) +#define ___opcode_identity32(x) ___asm_opcode_identity32(x) +#define ___opcode_identity16(x) ___asm_opcode_identity16(x) + +#else /* ! __ASSEMBLY__ */ #include #include +#define ___opcode_swab32(x) swab32(x) +#define ___opcode_swab16(x) swab16(x) +#define ___opcode_swahb32(x) swahb32(x) +#define ___opcode_swahw32(x) swahw32(x) +#define ___opcode_identity32(x) ((u32)(x)) +#define ___opcode_identity16(x) ((u16)(x)) + +#endif /* ! __ASSEMBLY__ */ + + #ifdef CONFIG_CPU_ENDIAN_BE8 -#define __opcode_to_mem_arm(x) swab32(x) -#define __opcode_to_mem_thumb16(x) swab16(x) -#define __opcode_to_mem_thumb32(x) swahb32(x) -#else -#define __opcode_to_mem_arm(x) ((u32)(x)) -#define __opcode_to_mem_thumb16(x) ((u16)(x)) -#define __opcode_to_mem_thumb32(x) swahw32(x) + +#define __opcode_to_mem_arm(x) ___opcode_swab32(x) +#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x) +#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x) +#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x) +#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x) +#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x) + +#else /* ! CONFIG_CPU_ENDIAN_BE8 */ + +#define __opcode_to_mem_arm(x) ___opcode_identity32(x) +#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x) +#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x) +#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x) +#ifndef CONFIG_CPU_ENDIAN_BE32 +/* + * On BE32 systems, using 32-bit accesses to store Thumb instructions will not + * work in all cases, due to alignment constraints. For now, a correct + * version is not provided for BE32. + */ +#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x) +#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x) #endif +#endif /* ! CONFIG_CPU_ENDIAN_BE8 */ + #define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x) #define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x) +#ifndef CONFIG_CPU_ENDIAN_BE32 #define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x) +#endif /* Operations specific to Thumb opcodes */ /* Instruction size checks: */ -#define __opcode_is_thumb32(x) ((u32)(x) >= 0xE8000000UL) -#define __opcode_is_thumb16(x) ((u32)(x) < 0xE800UL) +#define __opcode_is_thumb32(x) ( \ + ((x) & 0xF8000000) == 0xE8000000 \ + || ((x) & 0xF0000000) == 0xF0000000 \ +) +#define __opcode_is_thumb16(x) ( \ + ((x) & 0xFFFF0000) == 0 \ + && !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) == 0xF000) \ +) /* Operations to construct or split 32-bit Thumb instructions: */ -#define __opcode_thumb32_first(x) ((u16)((x) >> 16)) -#define __opcode_thumb32_second(x) ((u16)(x)) -#define __opcode_thumb32_compose(first, second) \ - (((u32)(u16)(first) << 16) | (u32)(u16)(second)) +#define __opcode_thumb32_first(x) (___opcode_identity16((x) >> 16)) +#define __opcode_thumb32_second(x) (___opcode_identity16(x)) +#define __opcode_thumb32_compose(first, second) ( \ + (___opcode_identity32(___opcode_identity16(first)) << 16) \ + | ___opcode_identity32(___opcode_identity16(second)) \ +) +#define ___asm_opcode_thumb32_first(x) (___asm_opcode_identity16((x) >> 16)) +#define ___asm_opcode_thumb32_second(x) (___asm_opcode_identity16(x)) +#define ___asm_opcode_thumb32_compose(first, second) ( \ + (___asm_opcode_identity32(___asm_opcode_identity16(first)) << 16) \ + | ___asm_opcode_identity32(___asm_opcode_identity16(second)) \ +) -#endif /* __ASSEMBLY__ */ +/* + * Opcode injection helpers + * + * In rare cases it is necessary to assemble an opcode which the + * assembler does not support directly, or which would normally be + * rejected because of the CFLAGS or AFLAGS used to build the affected + * file. + * + * Before using these macros, consider carefully whether it is feasible + * instead to change the build flags for your file, or whether it really + * makes sense to support old assembler versions when building that + * particular kernel feature. + * + * The macros defined here should only be used where there is no viable + * alternative. + * + * + * __inst_arm(x): emit the specified ARM opcode + * __inst_thumb16(x): emit the specified 16-bit Thumb opcode + * __inst_thumb32(x): emit the specified 32-bit Thumb opcode + * + * __inst_arm_thumb16(arm, thumb): emit either the specified arm or + * 16-bit Thumb opcode, depending on whether an ARM or Thumb-2 + * kernel is being built + * + * __inst_arm_thumb32(arm, thumb): emit either the specified arm or + * 32-bit Thumb opcode, depending on whether an ARM or Thumb-2 + * kernel is being built + * + * + * Note that using these macros directly is poor practice. Instead, you + * should use them to define human-readable wrapper macros to encode the + * instructions that you care about. In code which might run on ARMv7 or + * above, you can usually use the __inst_arm_thumb{16,32} macros to + * specify the ARM and Thumb alternatives at the same time. This ensures + * that the correct opcode gets emitted depending on the instruction set + * used for the kernel build. + * + * Look at opcodes-virt.h for an example of how to use these macros. + */ +#include + +#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x)) +#define __inst_thumb32(x) ___inst_thumb32( \ + ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(x)), \ + ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second(x)) \ +) +#define __inst_thumb16(x) ___inst_thumb16(___asm_opcode_to_mem_thumb16(x)) + +#ifdef CONFIG_THUMB2_KERNEL +#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \ + __inst_thumb16(thumb_opcode) +#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \ + __inst_thumb32(thumb_opcode) +#else +#define __inst_arm_thumb16(arm_opcode, thumb_opcode) __inst_arm(arm_opcode) +#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode) +#endif + +/* Helpers for the helpers. Don't use these directly. */ +#ifdef __ASSEMBLY__ +#define ___inst_arm(x) .long x +#define ___inst_thumb16(x) .short x +#define ___inst_thumb32(first, second) .short first, second +#else +#define ___inst_arm(x) ".long " __stringify(x) "\n\t" +#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t" +#define ___inst_thumb32(first, second) \ + ".short " __stringify(first) ", " __stringify(second) "\n\t" +#endif #endif /* __ASM_ARM_OPCODES_H */ diff --git a/arch/arm/include/asm/page.h b/arch/arm/include/asm/page.h index ecf901902e448719120c921413ada640baa5794e..812a4944e78343469a2216327a746f37ce01b98c 100644 --- a/arch/arm/include/asm/page.h +++ b/arch/arm/include/asm/page.h @@ -19,7 +19,7 @@ #ifndef CONFIG_MMU -#include "page-nommu.h" +#include #else diff --git a/arch/arm/include/asm/param.h b/arch/arm/include/asm/param.h deleted file mode 100644 index 8b24bf94c06baac0e054c88c402e1ac01eed4bb1..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/param.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/include/asm/param.h - * - * Copyright (C) 1995-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_PARAM_H -#define __ASM_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* User interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#else -# define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -/* max length of hostname */ -#define MAXHOSTNAMELEN 64 - -#endif - diff --git a/arch/arm/include/asm/parport.h b/arch/arm/include/asm/parport.h deleted file mode 100644 index 26e94b09035a77bcdaf49405b9e83607b7af8704..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/parport.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/include/asm/parport.h: ARM-specific parport initialisation - * - * Copyright (C) 1999, 2000 Tim Waugh - * - * This file should only be included by drivers/parport/parport_pc.c. - */ - -#ifndef __ASMARM_PARPORT_H -#define __ASMARM_PARPORT_H - -static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); -static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) -{ - return parport_pc_find_isa_ports (autoirq, autodma); -} - -#endif /* !(_ASMARM_PARPORT_H) */ diff --git a/arch/arm/include/asm/pgtable.h b/arch/arm/include/asm/pgtable.h index 41dc31f834c3b68926a070036ac024b83f8e7b66..08c12312a1f9c97ca2cf4e5480197d68c657cdd0 100644 --- a/arch/arm/include/asm/pgtable.h +++ b/arch/arm/include/asm/pgtable.h @@ -16,7 +16,7 @@ #ifndef CONFIG_MMU #include -#include "pgtable-nommu.h" +#include #else diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index 99afa7498260cdad985eaf9c74fd713095dd09f6..06e7d509eaac218864cc9d089ce9e6f4177c22f9 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -85,11 +85,6 @@ unsigned long get_wchan(struct task_struct *p); #define cpu_relax() barrier() #endif -/* - * Create a new kernel thread - */ -extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); - #define task_pt_regs(p) \ ((struct pt_regs *)(THREAD_START_SP + task_stack_page(p)) - 1) diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h index 355ece523f41f98d623f2c9af8d4d290a02af737..3d52ee1bfb3113e113f231807dba71bc739ceac0 100644 --- a/arch/arm/include/asm/ptrace.h +++ b/arch/arm/include/asm/ptrace.h @@ -10,132 +10,12 @@ #ifndef __ASM_ARM_PTRACE_H #define __ASM_ARM_PTRACE_H -#include - -#define PTRACE_GETREGS 12 -#define PTRACE_SETREGS 13 -#define PTRACE_GETFPREGS 14 -#define PTRACE_SETFPREGS 15 -/* PTRACE_ATTACH is 16 */ -/* PTRACE_DETACH is 17 */ -#define PTRACE_GETWMMXREGS 18 -#define PTRACE_SETWMMXREGS 19 -/* 20 is unused */ -#define PTRACE_OLDSETOPTIONS 21 -#define PTRACE_GET_THREAD_AREA 22 -#define PTRACE_SET_SYSCALL 23 -/* PTRACE_SYSCALL is 24 */ -#define PTRACE_GETCRUNCHREGS 25 -#define PTRACE_SETCRUNCHREGS 26 -#define PTRACE_GETVFPREGS 27 -#define PTRACE_SETVFPREGS 28 -#define PTRACE_GETHBPREGS 29 -#define PTRACE_SETHBPREGS 30 - -/* - * PSR bits - */ -#define USR26_MODE 0x00000000 -#define FIQ26_MODE 0x00000001 -#define IRQ26_MODE 0x00000002 -#define SVC26_MODE 0x00000003 -#define USR_MODE 0x00000010 -#define FIQ_MODE 0x00000011 -#define IRQ_MODE 0x00000012 -#define SVC_MODE 0x00000013 -#define ABT_MODE 0x00000017 -#define UND_MODE 0x0000001b -#define SYSTEM_MODE 0x0000001f -#define MODE32_BIT 0x00000010 -#define MODE_MASK 0x0000001f -#define PSR_T_BIT 0x00000020 -#define PSR_F_BIT 0x00000040 -#define PSR_I_BIT 0x00000080 -#define PSR_A_BIT 0x00000100 -#define PSR_E_BIT 0x00000200 -#define PSR_J_BIT 0x01000000 -#define PSR_Q_BIT 0x08000000 -#define PSR_V_BIT 0x10000000 -#define PSR_C_BIT 0x20000000 -#define PSR_Z_BIT 0x40000000 -#define PSR_N_BIT 0x80000000 - -/* - * Groups of PSR bits - */ -#define PSR_f 0xff000000 /* Flags */ -#define PSR_s 0x00ff0000 /* Status */ -#define PSR_x 0x0000ff00 /* Extension */ -#define PSR_c 0x000000ff /* Control */ - -/* - * ARMv7 groups of PSR bits - */ -#define APSR_MASK 0xf80f0000 /* N, Z, C, V, Q and GE flags */ -#define PSR_ISET_MASK 0x01000010 /* ISA state (J, T) mask */ -#define PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */ -#define PSR_ENDIAN_MASK 0x00000200 /* Endianness state mask */ - -/* - * Default endianness state - */ -#ifdef CONFIG_CPU_ENDIAN_BE8 -#define PSR_ENDSTATE PSR_E_BIT -#else -#define PSR_ENDSTATE 0 -#endif - -/* - * These are 'magic' values for PTRACE_PEEKUSR that return info about where a - * process is located in memory. - */ -#define PT_TEXT_ADDR 0x10000 -#define PT_DATA_ADDR 0x10004 -#define PT_TEXT_END_ADDR 0x10008 +#include #ifndef __ASSEMBLY__ - -/* - * This struct defines the way the registers are stored on the - * stack during a system call. Note that sizeof(struct pt_regs) - * has to be a multiple of 8. - */ -#ifndef __KERNEL__ -struct pt_regs { - long uregs[18]; -}; -#else /* __KERNEL__ */ struct pt_regs { unsigned long uregs[18]; }; -#endif /* __KERNEL__ */ - -#define ARM_cpsr uregs[16] -#define ARM_pc uregs[15] -#define ARM_lr uregs[14] -#define ARM_sp uregs[13] -#define ARM_ip uregs[12] -#define ARM_fp uregs[11] -#define ARM_r10 uregs[10] -#define ARM_r9 uregs[9] -#define ARM_r8 uregs[8] -#define ARM_r7 uregs[7] -#define ARM_r6 uregs[6] -#define ARM_r5 uregs[5] -#define ARM_r4 uregs[4] -#define ARM_r3 uregs[3] -#define ARM_r2 uregs[2] -#define ARM_r1 uregs[1] -#define ARM_r0 uregs[0] -#define ARM_ORIG_r0 uregs[17] - -/* - * The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS - * and core dumps. - */ -#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ ) - -#ifdef __KERNEL__ #define user_mode(regs) \ (((regs)->ARM_cpsr & 0xf) == 0) @@ -254,9 +134,10 @@ static inline unsigned long user_stack_pointer(struct pt_regs *regs) return regs->ARM_sp; } -#endif /* __KERNEL__ */ +#define current_pt_regs(void) ({ \ + register unsigned long sp asm ("sp"); \ + (struct pt_regs *)((sp | (THREAD_SIZE - 1)) - 7) - 1; \ +}) #endif /* __ASSEMBLY__ */ - #endif - diff --git a/arch/arm/include/asm/segment.h b/arch/arm/include/asm/segment.h deleted file mode 100644 index 9e24c21f630491f01fa9106d53d14dc72808e1e0..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/segment.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_ARM_SEGMENT_H -#define __ASM_ARM_SEGMENT_H - -#define __KERNEL_CS 0x0 -#define __KERNEL_DS 0x0 - -#define __USER_CS 0x1 -#define __USER_DS 0x1 - -#endif /* __ASM_ARM_SEGMENT_H */ - diff --git a/arch/arm/include/asm/sembuf.h b/arch/arm/include/asm/sembuf.h deleted file mode 100644 index 1c0283954289f8f5327787245bfbaa8aa8901710..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASMARM_SEMBUF_H -#define _ASMARM_SEMBUF_H - -/* - * The semid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASMARM_SEMBUF_H */ diff --git a/arch/arm/include/asm/serial.h b/arch/arm/include/asm/serial.h deleted file mode 100644 index ebb049091e26033502dec932ab9015486c713894..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/serial.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/include/asm/serial.h - * - * Copyright (C) 1996 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 15-10-1996 RMK Created - */ - -#ifndef __ASM_SERIAL_H -#define __ASM_SERIAL_H - -#define BASE_BAUD (1843200 / 16) - -#endif diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index 24d284a1bfc75faa0ed90fb7882a67f00128f336..c50f0560950110b9f60d21f9ea9647be4ee77688 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -14,176 +14,8 @@ #ifndef __ASMARM_SETUP_H #define __ASMARM_SETUP_H -#include +#include -#define COMMAND_LINE_SIZE 1024 - -/* The list ends with an ATAG_NONE node. */ -#define ATAG_NONE 0x00000000 - -struct tag_header { - __u32 size; - __u32 tag; -}; - -/* The list must start with an ATAG_CORE node */ -#define ATAG_CORE 0x54410001 - -struct tag_core { - __u32 flags; /* bit 0 = read-only */ - __u32 pagesize; - __u32 rootdev; -}; - -/* it is allowed to have multiple ATAG_MEM nodes */ -#define ATAG_MEM 0x54410002 - -struct tag_mem32 { - __u32 size; - __u32 start; /* physical start address */ -}; - -/* VGA text type displays */ -#define ATAG_VIDEOTEXT 0x54410003 - -struct tag_videotext { - __u8 x; - __u8 y; - __u16 video_page; - __u8 video_mode; - __u8 video_cols; - __u16 video_ega_bx; - __u8 video_lines; - __u8 video_isvga; - __u16 video_points; -}; - -/* describes how the ramdisk will be used in kernel */ -#define ATAG_RAMDISK 0x54410004 - -struct tag_ramdisk { - __u32 flags; /* bit 0 = load, bit 1 = prompt */ - __u32 size; /* decompressed ramdisk size in _kilo_ bytes */ - __u32 start; /* starting block of floppy-based RAM disk image */ -}; - -/* describes where the compressed ramdisk image lives (virtual address) */ -/* - * this one accidentally used virtual addresses - as such, - * it's deprecated. - */ -#define ATAG_INITRD 0x54410005 - -/* describes where the compressed ramdisk image lives (physical address) */ -#define ATAG_INITRD2 0x54420005 - -struct tag_initrd { - __u32 start; /* physical start address */ - __u32 size; /* size of compressed ramdisk image in bytes */ -}; - -/* board serial number. "64 bits should be enough for everybody" */ -#define ATAG_SERIAL 0x54410006 - -struct tag_serialnr { - __u32 low; - __u32 high; -}; - -/* board revision */ -#define ATAG_REVISION 0x54410007 - -struct tag_revision { - __u32 rev; -}; - -/* initial values for vesafb-type framebuffers. see struct screen_info - * in include/linux/tty.h - */ -#define ATAG_VIDEOLFB 0x54410008 - -struct tag_videolfb { - __u16 lfb_width; - __u16 lfb_height; - __u16 lfb_depth; - __u16 lfb_linelength; - __u32 lfb_base; - __u32 lfb_size; - __u8 red_size; - __u8 red_pos; - __u8 green_size; - __u8 green_pos; - __u8 blue_size; - __u8 blue_pos; - __u8 rsvd_size; - __u8 rsvd_pos; -}; - -/* command line: \0 terminated string */ -#define ATAG_CMDLINE 0x54410009 - -struct tag_cmdline { - char cmdline[1]; /* this is the minimum size */ -}; - -/* acorn RiscPC specific information */ -#define ATAG_ACORN 0x41000101 - -struct tag_acorn { - __u32 memc_control_reg; - __u32 vram_pages; - __u8 sounddefault; - __u8 adfsdrives; -}; - -/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */ -#define ATAG_MEMCLK 0x41000402 - -struct tag_memclk { - __u32 fmemclk; -}; - -struct tag { - struct tag_header hdr; - union { - struct tag_core core; - struct tag_mem32 mem; - struct tag_videotext videotext; - struct tag_ramdisk ramdisk; - struct tag_initrd initrd; - struct tag_serialnr serialnr; - struct tag_revision revision; - struct tag_videolfb videolfb; - struct tag_cmdline cmdline; - - /* - * Acorn specific - */ - struct tag_acorn acorn; - - /* - * DC21285 specific - */ - struct tag_memclk memclk; - } u; -}; - -struct tagtable { - __u32 tag; - int (*parse)(const struct tag *); -}; - -#define tag_member_present(tag,member) \ - ((unsigned long)(&((struct tag *)0L)->member + 1) \ - <= (tag)->hdr.size * 4) - -#define tag_next(t) ((struct tag *)((__u32 *)(t) + (t)->hdr.size)) -#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2) - -#define for_each_tag(t,base) \ - for (t = base; t->hdr.size; t = tag_next(t)) - -#ifdef __KERNEL__ #define __tag __used __attribute__((__section__(".taglist.init"))) #define __tagtable(tag, fn) \ @@ -221,6 +53,4 @@ extern int arm_add_memory(phys_addr_t start, phys_addr_t size); extern void early_print(const char *str, ...); extern void dump_machine_table(void); -#endif /* __KERNEL__ */ - #endif diff --git a/arch/arm/include/asm/shmbuf.h b/arch/arm/include/asm/shmbuf.h deleted file mode 100644 index 2e5c67ba1c97ba129324260b3ca40330b275c819..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASMARM_SHMBUF_H -#define _ASMARM_SHMBUF_H - -/* - * The shmid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASMARM_SHMBUF_H */ diff --git a/arch/arm/include/asm/signal.h b/arch/arm/include/asm/signal.h index 43ba0fb1c8ad2b774e42041715c1276b226ba7bf..5a7963dbd3fbd50d7006d43ad378b7dd579647b7 100644 --- a/arch/arm/include/asm/signal.h +++ b/arch/arm/include/asm/signal.h @@ -1,12 +1,8 @@ #ifndef _ASMARM_SIGNAL_H #define _ASMARM_SIGNAL_H -#include +#include -/* Avoid too many header ordering problems. */ -struct siginfo; - -#ifdef __KERNEL__ /* Most things should be clean enough to redefine this at will, if care is taken to make libc match. */ @@ -20,100 +16,6 @@ typedef struct { unsigned long sig[_NSIG_WORDS]; } sigset_t; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -#define NSIG 32 -typedef unsigned long sigset_t; - -#endif /* __KERNEL__ */ - -#define SIGHUP 1 -#define SIGINT 2 -#define SIGQUIT 3 -#define SIGILL 4 -#define SIGTRAP 5 -#define SIGABRT 6 -#define SIGIOT 6 -#define SIGBUS 7 -#define SIGFPE 8 -#define SIGKILL 9 -#define SIGUSR1 10 -#define SIGSEGV 11 -#define SIGUSR2 12 -#define SIGPIPE 13 -#define SIGALRM 14 -#define SIGTERM 15 -#define SIGSTKFLT 16 -#define SIGCHLD 17 -#define SIGCONT 18 -#define SIGSTOP 19 -#define SIGTSTP 20 -#define SIGTTIN 21 -#define SIGTTOU 22 -#define SIGURG 23 -#define SIGXCPU 24 -#define SIGXFSZ 25 -#define SIGVTALRM 26 -#define SIGPROF 27 -#define SIGWINCH 28 -#define SIGIO 29 -#define SIGPOLL SIGIO -/* -#define SIGLOST 29 -*/ -#define SIGPWR 30 -#define SIGSYS 31 -#define SIGUNUSED 31 - -/* These should not be considered constants from userland. */ -#define SIGRTMIN 32 -#define SIGRTMAX _NSIG - -#define SIGSWI 32 - -/* - * SA_FLAGS values: - * - * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. - * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. - * SA_SIGINFO deliver the signal with SIGINFO structs - * SA_THIRTYTWO delivers the signal in 32-bit mode, even if the task - * is running in 26-bit. - * SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)). - * SA_RESTART flag to get restarting signals (which were the default long ago) - * SA_NODEFER prevents the current signal from being masked in the handler. - * SA_RESETHAND clears the handler when the signal is delivered. - * - * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single - * Unix names RESETHAND and NODEFER respectively. - */ -#define SA_NOCLDSTOP 0x00000001 -#define SA_NOCLDWAIT 0x00000002 -#define SA_SIGINFO 0x00000004 -#define SA_THIRTYTWO 0x02000000 -#define SA_RESTORER 0x04000000 -#define SA_ONSTACK 0x08000000 -#define SA_RESTART 0x10000000 -#define SA_NODEFER 0x40000000 -#define SA_RESETHAND 0x80000000 - -#define SA_NOMASK SA_NODEFER -#define SA_ONESHOT SA_RESETHAND - - -/* - * sigaltstack controls - */ -#define SS_ONSTACK 1 -#define SS_DISABLE 2 - -#define MINSIGSTKSZ 2048 -#define SIGSTKSZ 8192 - -#include - -#ifdef __KERNEL__ struct old_sigaction { __sighandler_t sa_handler; old_sigset_t sa_mask; @@ -132,33 +34,6 @@ struct k_sigaction { struct sigaction sa; }; -#else -/* Here we must cater to libcs that poke about in kernel headers. */ - -struct sigaction { - union { - __sighandler_t _sa_handler; - void (*_sa_sigaction)(int, struct siginfo *, void *); - } _u; - sigset_t sa_mask; - unsigned long sa_flags; - void (*sa_restorer)(void); -}; - -#define sa_handler _u._sa_handler -#define sa_sigaction _u._sa_sigaction - -#endif /* __KERNEL__ */ - -typedef struct sigaltstack { - void __user *ss_sp; - int ss_flags; - size_t ss_size; -} stack_t; - -#ifdef __KERNEL__ #include #define ptrace_signal_deliver(regs, cookie) do { } while (0) #endif - -#endif diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h deleted file mode 100644 index 6433cadb6ed411ee0ca809d06b2d82e53731e1a7..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/socket.h +++ /dev/null @@ -1,72 +0,0 @@ -#ifndef _ASMARM_SOCKET_H -#define _ASMARM_SOCKET_H - -#include - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#define SO_PROTOCOL 38 -#define SO_DOMAIN 39 - -#define SO_RXQ_OVFL 40 - -#define SO_WIFI_STATUS 41 -#define SCM_WIFI_STATUS SO_WIFI_STATUS -#define SO_PEEK_OFF 42 - -/* Instruct lower device to use last 4-bytes of skb data as FCS */ -#define SO_NOFCS 43 - -#endif /* _ASM_SOCKET_H */ diff --git a/arch/arm/include/asm/sockios.h b/arch/arm/include/asm/sockios.h deleted file mode 100644 index a2588a2512dfc76aee67f9b9e27b0b07cf4525f9..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ARCH_ARM_SOCKIOS_H -#define __ARCH_ARM_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif diff --git a/arch/arm/include/asm/swab.h b/arch/arm/include/asm/swab.h index b859d82e30cafb5489fdb0297319a570f8362df3..537fc9b91889931459350ac8997cfb65e50b512b 100644 --- a/arch/arm/include/asm/swab.h +++ b/arch/arm/include/asm/swab.h @@ -15,14 +15,8 @@ #ifndef __ASM_ARM_SWAB_H #define __ASM_ARM_SWAB_H -#include -#include +#include -#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) -# define __SWAB_64_THRU_32__ -#endif - -#if defined(__KERNEL__) #if __LINUX_ARM_ARCH__ >= 6 static inline __attribute_const__ __u32 __arch_swahb32(__u32 x) @@ -42,32 +36,3 @@ static inline __attribute_const__ __u32 __arch_swab32(__u32 x) #endif #endif - -#if !defined(__KERNEL__) || __LINUX_ARM_ARCH__ < 6 -static inline __attribute_const__ __u32 __arch_swab32(__u32 x) -{ - __u32 t; - -#ifndef __thumb__ - if (!__builtin_constant_p(x)) { - /* - * The compiler needs a bit of a hint here to always do the - * right thing and not screw it up to different degrees - * depending on the gcc version. - */ - asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x)); - } else -#endif - t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ - - x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */ - t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */ - x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */ - - return x; -} -#define __arch_swab32 __arch_swab32 - -#endif - -#endif diff --git a/arch/arm/include/asm/sync_bitops.h b/arch/arm/include/asm/sync_bitops.h new file mode 100644 index 0000000000000000000000000000000000000000..63479eecbf769e122169e813f8e948e7e5126a90 --- /dev/null +++ b/arch/arm/include/asm/sync_bitops.h @@ -0,0 +1,27 @@ +#ifndef __ASM_SYNC_BITOPS_H__ +#define __ASM_SYNC_BITOPS_H__ + +#include +#include + +/* sync_bitops functions are equivalent to the SMP implementation of the + * original functions, independently from CONFIG_SMP being defined. + * + * We need them because _set_bit etc are not SMP safe if !CONFIG_SMP. But + * under Xen you might be communicating with a completely external entity + * who might be on another CPU (e.g. two uniprocessor guests communicating + * via event channels and grant tables). So we need a variant of the bit + * ops which are SMP safe even on a UP kernel. + */ + +#define sync_set_bit(nr, p) _set_bit(nr, p) +#define sync_clear_bit(nr, p) _clear_bit(nr, p) +#define sync_change_bit(nr, p) _change_bit(nr, p) +#define sync_test_and_set_bit(nr, p) _test_and_set_bit(nr, p) +#define sync_test_and_clear_bit(nr, p) _test_and_clear_bit(nr, p) +#define sync_test_and_change_bit(nr, p) _test_and_change_bit(nr, p) +#define sync_test_bit(nr, addr) test_bit(nr, addr) +#define sync_cmpxchg cmpxchg + + +#endif diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h index c334a23ddf75917b659c15eb0d854c94bf41f977..9fdded6b108971412c3f92a13be48724313b3512 100644 --- a/arch/arm/include/asm/syscall.h +++ b/arch/arm/include/asm/syscall.h @@ -8,6 +8,11 @@ #define _ASM_ARM_SYSCALL_H #include +#include + +#include + +#define NR_syscalls (__NR_syscalls) extern const unsigned long sys_call_table[]; diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index 74542c52f9befa1d5f614b3d223291f0d4a0d2c4..368165e33c1ce5f012c3a7ee29b253a66f7c07e1 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -2,7 +2,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/arm/include/asm/termbits.h b/arch/arm/include/asm/termbits.h deleted file mode 100644 index 704135d28d1d3a90d7d5bf32a0744bdf0c3383d9..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/termbits.h +++ /dev/null @@ -1,198 +0,0 @@ -#ifndef __ASM_ARM_TERMBITS_H -#define __ASM_ARM_TERMBITS_H - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ASM_ARM_TERMBITS_H */ diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index af7b0bda3355d9af850ae722b2b1f55277ef6e67..8477b4c1d39fb3fe43c21691d1ad46846a947e89 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -59,7 +59,9 @@ struct thread_info { __u32 syscall; /* syscall number */ __u8 used_cp[16]; /* thread used copro */ unsigned long tp_value; +#ifdef CONFIG_CRUNCH struct crunch_state crunchstate; +#endif union fp_state fpstate __attribute__((aligned(8))); union vfp_state vfpstate; #ifdef CONFIG_ARM_THUMBEE @@ -148,7 +150,7 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_SYSCALL_TRACE 8 #define TIF_SYSCALL_AUDIT 9 -#define TIF_POLLING_NRFLAG 16 +#define TIF_SYSCALL_TRACEPOINT 10 #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ #define TIF_RESTORE_SIGMASK 20 @@ -160,12 +162,12 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) -#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) +#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) /* Checks for any syscall work in entry-common.S */ -#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT) +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT) /* * Change these and you break ASM code in entry-common.S diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h index 963342acebb7200445970aeb51907e6cdf2eceed..83f2aa83899c4b14cede7dd798178655884c951f 100644 --- a/arch/arm/include/asm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -12,7 +12,6 @@ #ifndef _ASMARM_TIMEX_H #define _ASMARM_TIMEX_H -#include #ifdef CONFIG_ARCH_MULTIPLATFORM #define CLOCK_TICK_RATE 1000000 #else @@ -20,11 +19,6 @@ #endif typedef unsigned long cycles_t; - -#ifdef ARCH_HAS_READ_CURRENT_TIMER #define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; }) -#else -#define get_cycles() (0) -#endif #endif diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h deleted file mode 100644 index 28beab917ffc7741f967c53a1803d662fa648cac..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/types.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_ARM_TYPES_H -#define __ASM_ARM_TYPES_H - -#include - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#endif /* __KERNEL__ */ - -#endif - diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h deleted file mode 100644 index 44593a8949038d18f566a821b6c0d99161de43a5..0000000000000000000000000000000000000000 --- a/arch/arm/include/asm/unaligned.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_ARM_UNALIGNED_H -#define _ASM_ARM_UNALIGNED_H - -#include -#include -#include - -/* - * Select endianness - */ -#ifndef __ARMEB__ -#define get_unaligned __get_unaligned_le -#define put_unaligned __put_unaligned_le -#else -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be -#endif - -#endif /* _ASM_ARM_UNALIGNED_H */ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 2fde5fd1accedda5a00accac967e1985be9c7f08..8f60b6e6bd41c632ccfe4e90250fcc4cb3bff46a 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -13,439 +13,10 @@ #ifndef __ASM_ARM_UNISTD_H #define __ASM_ARM_UNISTD_H -#define __NR_OABI_SYSCALL_BASE 0x900000 +#include -#if defined(__thumb__) || defined(__ARM_EABI__) -#define __NR_SYSCALL_BASE 0 -#else -#define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE -#endif - -/* - * This file contains the system call numbers. - */ - -#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0) -#define __NR_exit (__NR_SYSCALL_BASE+ 1) -#define __NR_fork (__NR_SYSCALL_BASE+ 2) -#define __NR_read (__NR_SYSCALL_BASE+ 3) -#define __NR_write (__NR_SYSCALL_BASE+ 4) -#define __NR_open (__NR_SYSCALL_BASE+ 5) -#define __NR_close (__NR_SYSCALL_BASE+ 6) - /* 7 was sys_waitpid */ -#define __NR_creat (__NR_SYSCALL_BASE+ 8) -#define __NR_link (__NR_SYSCALL_BASE+ 9) -#define __NR_unlink (__NR_SYSCALL_BASE+ 10) -#define __NR_execve (__NR_SYSCALL_BASE+ 11) -#define __NR_chdir (__NR_SYSCALL_BASE+ 12) -#define __NR_time (__NR_SYSCALL_BASE+ 13) -#define __NR_mknod (__NR_SYSCALL_BASE+ 14) -#define __NR_chmod (__NR_SYSCALL_BASE+ 15) -#define __NR_lchown (__NR_SYSCALL_BASE+ 16) - /* 17 was sys_break */ - /* 18 was sys_stat */ -#define __NR_lseek (__NR_SYSCALL_BASE+ 19) -#define __NR_getpid (__NR_SYSCALL_BASE+ 20) -#define __NR_mount (__NR_SYSCALL_BASE+ 21) -#define __NR_umount (__NR_SYSCALL_BASE+ 22) -#define __NR_setuid (__NR_SYSCALL_BASE+ 23) -#define __NR_getuid (__NR_SYSCALL_BASE+ 24) -#define __NR_stime (__NR_SYSCALL_BASE+ 25) -#define __NR_ptrace (__NR_SYSCALL_BASE+ 26) -#define __NR_alarm (__NR_SYSCALL_BASE+ 27) - /* 28 was sys_fstat */ -#define __NR_pause (__NR_SYSCALL_BASE+ 29) -#define __NR_utime (__NR_SYSCALL_BASE+ 30) - /* 31 was sys_stty */ - /* 32 was sys_gtty */ -#define __NR_access (__NR_SYSCALL_BASE+ 33) -#define __NR_nice (__NR_SYSCALL_BASE+ 34) - /* 35 was sys_ftime */ -#define __NR_sync (__NR_SYSCALL_BASE+ 36) -#define __NR_kill (__NR_SYSCALL_BASE+ 37) -#define __NR_rename (__NR_SYSCALL_BASE+ 38) -#define __NR_mkdir (__NR_SYSCALL_BASE+ 39) -#define __NR_rmdir (__NR_SYSCALL_BASE+ 40) -#define __NR_dup (__NR_SYSCALL_BASE+ 41) -#define __NR_pipe (__NR_SYSCALL_BASE+ 42) -#define __NR_times (__NR_SYSCALL_BASE+ 43) - /* 44 was sys_prof */ -#define __NR_brk (__NR_SYSCALL_BASE+ 45) -#define __NR_setgid (__NR_SYSCALL_BASE+ 46) -#define __NR_getgid (__NR_SYSCALL_BASE+ 47) - /* 48 was sys_signal */ -#define __NR_geteuid (__NR_SYSCALL_BASE+ 49) -#define __NR_getegid (__NR_SYSCALL_BASE+ 50) -#define __NR_acct (__NR_SYSCALL_BASE+ 51) -#define __NR_umount2 (__NR_SYSCALL_BASE+ 52) - /* 53 was sys_lock */ -#define __NR_ioctl (__NR_SYSCALL_BASE+ 54) -#define __NR_fcntl (__NR_SYSCALL_BASE+ 55) - /* 56 was sys_mpx */ -#define __NR_setpgid (__NR_SYSCALL_BASE+ 57) - /* 58 was sys_ulimit */ - /* 59 was sys_olduname */ -#define __NR_umask (__NR_SYSCALL_BASE+ 60) -#define __NR_chroot (__NR_SYSCALL_BASE+ 61) -#define __NR_ustat (__NR_SYSCALL_BASE+ 62) -#define __NR_dup2 (__NR_SYSCALL_BASE+ 63) -#define __NR_getppid (__NR_SYSCALL_BASE+ 64) -#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65) -#define __NR_setsid (__NR_SYSCALL_BASE+ 66) -#define __NR_sigaction (__NR_SYSCALL_BASE+ 67) - /* 68 was sys_sgetmask */ - /* 69 was sys_ssetmask */ -#define __NR_setreuid (__NR_SYSCALL_BASE+ 70) -#define __NR_setregid (__NR_SYSCALL_BASE+ 71) -#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72) -#define __NR_sigpending (__NR_SYSCALL_BASE+ 73) -#define __NR_sethostname (__NR_SYSCALL_BASE+ 74) -#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75) -#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */ -#define __NR_getrusage (__NR_SYSCALL_BASE+ 77) -#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78) -#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79) -#define __NR_getgroups (__NR_SYSCALL_BASE+ 80) -#define __NR_setgroups (__NR_SYSCALL_BASE+ 81) -#define __NR_select (__NR_SYSCALL_BASE+ 82) -#define __NR_symlink (__NR_SYSCALL_BASE+ 83) - /* 84 was sys_lstat */ -#define __NR_readlink (__NR_SYSCALL_BASE+ 85) -#define __NR_uselib (__NR_SYSCALL_BASE+ 86) -#define __NR_swapon (__NR_SYSCALL_BASE+ 87) -#define __NR_reboot (__NR_SYSCALL_BASE+ 88) -#define __NR_readdir (__NR_SYSCALL_BASE+ 89) -#define __NR_mmap (__NR_SYSCALL_BASE+ 90) -#define __NR_munmap (__NR_SYSCALL_BASE+ 91) -#define __NR_truncate (__NR_SYSCALL_BASE+ 92) -#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93) -#define __NR_fchmod (__NR_SYSCALL_BASE+ 94) -#define __NR_fchown (__NR_SYSCALL_BASE+ 95) -#define __NR_getpriority (__NR_SYSCALL_BASE+ 96) -#define __NR_setpriority (__NR_SYSCALL_BASE+ 97) - /* 98 was sys_profil */ -#define __NR_statfs (__NR_SYSCALL_BASE+ 99) -#define __NR_fstatfs (__NR_SYSCALL_BASE+100) - /* 101 was sys_ioperm */ -#define __NR_socketcall (__NR_SYSCALL_BASE+102) -#define __NR_syslog (__NR_SYSCALL_BASE+103) -#define __NR_setitimer (__NR_SYSCALL_BASE+104) -#define __NR_getitimer (__NR_SYSCALL_BASE+105) -#define __NR_stat (__NR_SYSCALL_BASE+106) -#define __NR_lstat (__NR_SYSCALL_BASE+107) -#define __NR_fstat (__NR_SYSCALL_BASE+108) - /* 109 was sys_uname */ - /* 110 was sys_iopl */ -#define __NR_vhangup (__NR_SYSCALL_BASE+111) - /* 112 was sys_idle */ -#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */ -#define __NR_wait4 (__NR_SYSCALL_BASE+114) -#define __NR_swapoff (__NR_SYSCALL_BASE+115) -#define __NR_sysinfo (__NR_SYSCALL_BASE+116) -#define __NR_ipc (__NR_SYSCALL_BASE+117) -#define __NR_fsync (__NR_SYSCALL_BASE+118) -#define __NR_sigreturn (__NR_SYSCALL_BASE+119) -#define __NR_clone (__NR_SYSCALL_BASE+120) -#define __NR_setdomainname (__NR_SYSCALL_BASE+121) -#define __NR_uname (__NR_SYSCALL_BASE+122) - /* 123 was sys_modify_ldt */ -#define __NR_adjtimex (__NR_SYSCALL_BASE+124) -#define __NR_mprotect (__NR_SYSCALL_BASE+125) -#define __NR_sigprocmask (__NR_SYSCALL_BASE+126) - /* 127 was sys_create_module */ -#define __NR_init_module (__NR_SYSCALL_BASE+128) -#define __NR_delete_module (__NR_SYSCALL_BASE+129) - /* 130 was sys_get_kernel_syms */ -#define __NR_quotactl (__NR_SYSCALL_BASE+131) -#define __NR_getpgid (__NR_SYSCALL_BASE+132) -#define __NR_fchdir (__NR_SYSCALL_BASE+133) -#define __NR_bdflush (__NR_SYSCALL_BASE+134) -#define __NR_sysfs (__NR_SYSCALL_BASE+135) -#define __NR_personality (__NR_SYSCALL_BASE+136) - /* 137 was sys_afs_syscall */ -#define __NR_setfsuid (__NR_SYSCALL_BASE+138) -#define __NR_setfsgid (__NR_SYSCALL_BASE+139) -#define __NR__llseek (__NR_SYSCALL_BASE+140) -#define __NR_getdents (__NR_SYSCALL_BASE+141) -#define __NR__newselect (__NR_SYSCALL_BASE+142) -#define __NR_flock (__NR_SYSCALL_BASE+143) -#define __NR_msync (__NR_SYSCALL_BASE+144) -#define __NR_readv (__NR_SYSCALL_BASE+145) -#define __NR_writev (__NR_SYSCALL_BASE+146) -#define __NR_getsid (__NR_SYSCALL_BASE+147) -#define __NR_fdatasync (__NR_SYSCALL_BASE+148) -#define __NR__sysctl (__NR_SYSCALL_BASE+149) -#define __NR_mlock (__NR_SYSCALL_BASE+150) -#define __NR_munlock (__NR_SYSCALL_BASE+151) -#define __NR_mlockall (__NR_SYSCALL_BASE+152) -#define __NR_munlockall (__NR_SYSCALL_BASE+153) -#define __NR_sched_setparam (__NR_SYSCALL_BASE+154) -#define __NR_sched_getparam (__NR_SYSCALL_BASE+155) -#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156) -#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157) -#define __NR_sched_yield (__NR_SYSCALL_BASE+158) -#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159) -#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160) -#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161) -#define __NR_nanosleep (__NR_SYSCALL_BASE+162) -#define __NR_mremap (__NR_SYSCALL_BASE+163) -#define __NR_setresuid (__NR_SYSCALL_BASE+164) -#define __NR_getresuid (__NR_SYSCALL_BASE+165) - /* 166 was sys_vm86 */ - /* 167 was sys_query_module */ -#define __NR_poll (__NR_SYSCALL_BASE+168) -#define __NR_nfsservctl (__NR_SYSCALL_BASE+169) -#define __NR_setresgid (__NR_SYSCALL_BASE+170) -#define __NR_getresgid (__NR_SYSCALL_BASE+171) -#define __NR_prctl (__NR_SYSCALL_BASE+172) -#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173) -#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174) -#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175) -#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176) -#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177) -#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178) -#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179) -#define __NR_pread64 (__NR_SYSCALL_BASE+180) -#define __NR_pwrite64 (__NR_SYSCALL_BASE+181) -#define __NR_chown (__NR_SYSCALL_BASE+182) -#define __NR_getcwd (__NR_SYSCALL_BASE+183) -#define __NR_capget (__NR_SYSCALL_BASE+184) -#define __NR_capset (__NR_SYSCALL_BASE+185) -#define __NR_sigaltstack (__NR_SYSCALL_BASE+186) -#define __NR_sendfile (__NR_SYSCALL_BASE+187) - /* 188 reserved */ - /* 189 reserved */ -#define __NR_vfork (__NR_SYSCALL_BASE+190) -#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */ -#define __NR_mmap2 (__NR_SYSCALL_BASE+192) -#define __NR_truncate64 (__NR_SYSCALL_BASE+193) -#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194) -#define __NR_stat64 (__NR_SYSCALL_BASE+195) -#define __NR_lstat64 (__NR_SYSCALL_BASE+196) -#define __NR_fstat64 (__NR_SYSCALL_BASE+197) -#define __NR_lchown32 (__NR_SYSCALL_BASE+198) -#define __NR_getuid32 (__NR_SYSCALL_BASE+199) -#define __NR_getgid32 (__NR_SYSCALL_BASE+200) -#define __NR_geteuid32 (__NR_SYSCALL_BASE+201) -#define __NR_getegid32 (__NR_SYSCALL_BASE+202) -#define __NR_setreuid32 (__NR_SYSCALL_BASE+203) -#define __NR_setregid32 (__NR_SYSCALL_BASE+204) -#define __NR_getgroups32 (__NR_SYSCALL_BASE+205) -#define __NR_setgroups32 (__NR_SYSCALL_BASE+206) -#define __NR_fchown32 (__NR_SYSCALL_BASE+207) -#define __NR_setresuid32 (__NR_SYSCALL_BASE+208) -#define __NR_getresuid32 (__NR_SYSCALL_BASE+209) -#define __NR_setresgid32 (__NR_SYSCALL_BASE+210) -#define __NR_getresgid32 (__NR_SYSCALL_BASE+211) -#define __NR_chown32 (__NR_SYSCALL_BASE+212) -#define __NR_setuid32 (__NR_SYSCALL_BASE+213) -#define __NR_setgid32 (__NR_SYSCALL_BASE+214) -#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215) -#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216) -#define __NR_getdents64 (__NR_SYSCALL_BASE+217) -#define __NR_pivot_root (__NR_SYSCALL_BASE+218) -#define __NR_mincore (__NR_SYSCALL_BASE+219) -#define __NR_madvise (__NR_SYSCALL_BASE+220) -#define __NR_fcntl64 (__NR_SYSCALL_BASE+221) - /* 222 for tux */ - /* 223 is unused */ -#define __NR_gettid (__NR_SYSCALL_BASE+224) -#define __NR_readahead (__NR_SYSCALL_BASE+225) -#define __NR_setxattr (__NR_SYSCALL_BASE+226) -#define __NR_lsetxattr (__NR_SYSCALL_BASE+227) -#define __NR_fsetxattr (__NR_SYSCALL_BASE+228) -#define __NR_getxattr (__NR_SYSCALL_BASE+229) -#define __NR_lgetxattr (__NR_SYSCALL_BASE+230) -#define __NR_fgetxattr (__NR_SYSCALL_BASE+231) -#define __NR_listxattr (__NR_SYSCALL_BASE+232) -#define __NR_llistxattr (__NR_SYSCALL_BASE+233) -#define __NR_flistxattr (__NR_SYSCALL_BASE+234) -#define __NR_removexattr (__NR_SYSCALL_BASE+235) -#define __NR_lremovexattr (__NR_SYSCALL_BASE+236) -#define __NR_fremovexattr (__NR_SYSCALL_BASE+237) -#define __NR_tkill (__NR_SYSCALL_BASE+238) -#define __NR_sendfile64 (__NR_SYSCALL_BASE+239) -#define __NR_futex (__NR_SYSCALL_BASE+240) -#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241) -#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242) -#define __NR_io_setup (__NR_SYSCALL_BASE+243) -#define __NR_io_destroy (__NR_SYSCALL_BASE+244) -#define __NR_io_getevents (__NR_SYSCALL_BASE+245) -#define __NR_io_submit (__NR_SYSCALL_BASE+246) -#define __NR_io_cancel (__NR_SYSCALL_BASE+247) -#define __NR_exit_group (__NR_SYSCALL_BASE+248) -#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249) -#define __NR_epoll_create (__NR_SYSCALL_BASE+250) -#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251) -#define __NR_epoll_wait (__NR_SYSCALL_BASE+252) -#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253) - /* 254 for set_thread_area */ - /* 255 for get_thread_area */ -#define __NR_set_tid_address (__NR_SYSCALL_BASE+256) -#define __NR_timer_create (__NR_SYSCALL_BASE+257) -#define __NR_timer_settime (__NR_SYSCALL_BASE+258) -#define __NR_timer_gettime (__NR_SYSCALL_BASE+259) -#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260) -#define __NR_timer_delete (__NR_SYSCALL_BASE+261) -#define __NR_clock_settime (__NR_SYSCALL_BASE+262) -#define __NR_clock_gettime (__NR_SYSCALL_BASE+263) -#define __NR_clock_getres (__NR_SYSCALL_BASE+264) -#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265) -#define __NR_statfs64 (__NR_SYSCALL_BASE+266) -#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267) -#define __NR_tgkill (__NR_SYSCALL_BASE+268) -#define __NR_utimes (__NR_SYSCALL_BASE+269) -#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270) -#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271) -#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272) -#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273) -#define __NR_mq_open (__NR_SYSCALL_BASE+274) -#define __NR_mq_unlink (__NR_SYSCALL_BASE+275) -#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276) -#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277) -#define __NR_mq_notify (__NR_SYSCALL_BASE+278) -#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279) -#define __NR_waitid (__NR_SYSCALL_BASE+280) -#define __NR_socket (__NR_SYSCALL_BASE+281) -#define __NR_bind (__NR_SYSCALL_BASE+282) -#define __NR_connect (__NR_SYSCALL_BASE+283) -#define __NR_listen (__NR_SYSCALL_BASE+284) -#define __NR_accept (__NR_SYSCALL_BASE+285) -#define __NR_getsockname (__NR_SYSCALL_BASE+286) -#define __NR_getpeername (__NR_SYSCALL_BASE+287) -#define __NR_socketpair (__NR_SYSCALL_BASE+288) -#define __NR_send (__NR_SYSCALL_BASE+289) -#define __NR_sendto (__NR_SYSCALL_BASE+290) -#define __NR_recv (__NR_SYSCALL_BASE+291) -#define __NR_recvfrom (__NR_SYSCALL_BASE+292) -#define __NR_shutdown (__NR_SYSCALL_BASE+293) -#define __NR_setsockopt (__NR_SYSCALL_BASE+294) -#define __NR_getsockopt (__NR_SYSCALL_BASE+295) -#define __NR_sendmsg (__NR_SYSCALL_BASE+296) -#define __NR_recvmsg (__NR_SYSCALL_BASE+297) -#define __NR_semop (__NR_SYSCALL_BASE+298) -#define __NR_semget (__NR_SYSCALL_BASE+299) -#define __NR_semctl (__NR_SYSCALL_BASE+300) -#define __NR_msgsnd (__NR_SYSCALL_BASE+301) -#define __NR_msgrcv (__NR_SYSCALL_BASE+302) -#define __NR_msgget (__NR_SYSCALL_BASE+303) -#define __NR_msgctl (__NR_SYSCALL_BASE+304) -#define __NR_shmat (__NR_SYSCALL_BASE+305) -#define __NR_shmdt (__NR_SYSCALL_BASE+306) -#define __NR_shmget (__NR_SYSCALL_BASE+307) -#define __NR_shmctl (__NR_SYSCALL_BASE+308) -#define __NR_add_key (__NR_SYSCALL_BASE+309) -#define __NR_request_key (__NR_SYSCALL_BASE+310) -#define __NR_keyctl (__NR_SYSCALL_BASE+311) -#define __NR_semtimedop (__NR_SYSCALL_BASE+312) -#define __NR_vserver (__NR_SYSCALL_BASE+313) -#define __NR_ioprio_set (__NR_SYSCALL_BASE+314) -#define __NR_ioprio_get (__NR_SYSCALL_BASE+315) -#define __NR_inotify_init (__NR_SYSCALL_BASE+316) -#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317) -#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318) -#define __NR_mbind (__NR_SYSCALL_BASE+319) -#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) -#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) -#define __NR_openat (__NR_SYSCALL_BASE+322) -#define __NR_mkdirat (__NR_SYSCALL_BASE+323) -#define __NR_mknodat (__NR_SYSCALL_BASE+324) -#define __NR_fchownat (__NR_SYSCALL_BASE+325) -#define __NR_futimesat (__NR_SYSCALL_BASE+326) -#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) -#define __NR_unlinkat (__NR_SYSCALL_BASE+328) -#define __NR_renameat (__NR_SYSCALL_BASE+329) -#define __NR_linkat (__NR_SYSCALL_BASE+330) -#define __NR_symlinkat (__NR_SYSCALL_BASE+331) -#define __NR_readlinkat (__NR_SYSCALL_BASE+332) -#define __NR_fchmodat (__NR_SYSCALL_BASE+333) -#define __NR_faccessat (__NR_SYSCALL_BASE+334) -#define __NR_pselect6 (__NR_SYSCALL_BASE+335) -#define __NR_ppoll (__NR_SYSCALL_BASE+336) -#define __NR_unshare (__NR_SYSCALL_BASE+337) -#define __NR_set_robust_list (__NR_SYSCALL_BASE+338) -#define __NR_get_robust_list (__NR_SYSCALL_BASE+339) -#define __NR_splice (__NR_SYSCALL_BASE+340) -#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341) -#define __NR_sync_file_range2 __NR_arm_sync_file_range -#define __NR_tee (__NR_SYSCALL_BASE+342) -#define __NR_vmsplice (__NR_SYSCALL_BASE+343) -#define __NR_move_pages (__NR_SYSCALL_BASE+344) -#define __NR_getcpu (__NR_SYSCALL_BASE+345) -#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346) -#define __NR_kexec_load (__NR_SYSCALL_BASE+347) -#define __NR_utimensat (__NR_SYSCALL_BASE+348) -#define __NR_signalfd (__NR_SYSCALL_BASE+349) -#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) -#define __NR_eventfd (__NR_SYSCALL_BASE+351) -#define __NR_fallocate (__NR_SYSCALL_BASE+352) -#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) -#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) -#define __NR_signalfd4 (__NR_SYSCALL_BASE+355) -#define __NR_eventfd2 (__NR_SYSCALL_BASE+356) -#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357) -#define __NR_dup3 (__NR_SYSCALL_BASE+358) -#define __NR_pipe2 (__NR_SYSCALL_BASE+359) -#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) -#define __NR_preadv (__NR_SYSCALL_BASE+361) -#define __NR_pwritev (__NR_SYSCALL_BASE+362) -#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363) -#define __NR_perf_event_open (__NR_SYSCALL_BASE+364) -#define __NR_recvmmsg (__NR_SYSCALL_BASE+365) -#define __NR_accept4 (__NR_SYSCALL_BASE+366) -#define __NR_fanotify_init (__NR_SYSCALL_BASE+367) -#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368) -#define __NR_prlimit64 (__NR_SYSCALL_BASE+369) -#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370) -#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) -#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) -#define __NR_syncfs (__NR_SYSCALL_BASE+373) -#define __NR_sendmmsg (__NR_SYSCALL_BASE+374) -#define __NR_setns (__NR_SYSCALL_BASE+375) -#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) -#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) - /* 378 for kcmp */ - -/* - * The following SWIs are ARM private. - */ -#define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000) -#define __ARM_NR_breakpoint (__ARM_NR_BASE+1) -#define __ARM_NR_cacheflush (__ARM_NR_BASE+2) -#define __ARM_NR_usr26 (__ARM_NR_BASE+3) -#define __ARM_NR_usr32 (__ARM_NR_BASE+4) -#define __ARM_NR_set_tls (__ARM_NR_BASE+5) - -/* - * *NOTE*: This is a ghost syscall private to the kernel. Only the - * __kuser_cmpxchg code in entry-armv.S should be aware of its - * existence. Don't ever use this from user code. - */ -#ifdef __KERNEL__ +#define __NR_syscalls (380) #define __ARM_NR_cmpxchg (__ARM_NR_BASE+0x00fff0) -#endif - -/* - * The following syscalls are obsolete and no longer available for EABI. - */ -#if !defined(__KERNEL__) -#if defined(__ARM_EABI__) -#undef __NR_time -#undef __NR_umount -#undef __NR_stime -#undef __NR_alarm -#undef __NR_utime -#undef __NR_getrlimit -#undef __NR_select -#undef __NR_readdir -#undef __NR_mmap -#undef __NR_socketcall -#undef __NR_syscall -#undef __NR_ipc -#endif -#endif - -#ifdef __KERNEL__ #define __ARCH_WANT_STAT64 #define __ARCH_WANT_SYS_GETHOSTNAME @@ -470,6 +41,7 @@ #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_SYS_SOCKETCALL #endif +#define __ARCH_WANT_SYS_EXECVE /* * "Conditional" syscalls @@ -486,5 +58,4 @@ #define __IGNORE_migrate_pages #define __IGNORE_kcmp -#endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/include/asm/vfpmacros.h b/arch/arm/include/asm/vfpmacros.h index 3d5fc41ae8d38a7743b3bee9c55490135c19dcea..6a6f1e485f41a2b9402534c435b79c183cb5cdb2 100644 --- a/arch/arm/include/asm/vfpmacros.h +++ b/arch/arm/include/asm/vfpmacros.h @@ -5,7 +5,7 @@ */ #include -#include "vfp.h" +#include @ Macros to allow building with old toolkits (with no VFP support) .macro VFPFMRX, rd, sysreg, cond @@ -28,7 +28,7 @@ ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] tst \tmp, #HWCAP_VFPv3D16 - ldceq p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} + ldceql p11, cr0, [\base],#32*4 @ FLDMIAD \base!, {d16-d31} addne \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 @@ -52,7 +52,7 @@ ldr \tmp, =elf_hwcap @ may not have MVFR regs ldr \tmp, [\tmp, #0] tst \tmp, #HWCAP_VFPv3D16 - stceq p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} + stceql p11, cr0, [\base],#32*4 @ FSTMIAD \base!, {d16-d31} addne \base, \base, #32*4 @ step over unused register space #else VFPFMRX \tmp, MVFR0 @ Media and VFP Feature Register 0 diff --git a/arch/arm/include/asm/virt.h b/arch/arm/include/asm/virt.h new file mode 100644 index 0000000000000000000000000000000000000000..86164df86cb402d0f17bddd35fc5116de6cf6816 --- /dev/null +++ b/arch/arm/include/asm/virt.h @@ -0,0 +1,69 @@ +/* + * Copyright (c) 2012 Linaro Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#ifndef VIRT_H +#define VIRT_H + +#include + +/* + * Flag indicating that the kernel was not entered in the same mode on every + * CPU. The zImage loader stashes this value in an SPSR, so we need an + * architecturally defined flag bit here (the N flag, as it happens) + */ +#define BOOT_CPU_MODE_MISMATCH (1<<31) + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_ARM_VIRT_EXT +/* + * __boot_cpu_mode records what mode the primary CPU was booted in. + * A correctly-implemented bootloader must start all CPUs in the same mode: + * if it fails to do this, the flag BOOT_CPU_MODE_MISMATCH is set to indicate + * that some CPU(s) were booted in a different mode. + * + * This allows the kernel to flag an error when the secondaries have come up. + */ +extern int __boot_cpu_mode; + +void __hyp_set_vectors(unsigned long phys_vector_base); +unsigned long __hyp_get_vectors(void); +#else +#define __boot_cpu_mode (SVC_MODE) +#endif + +#ifndef ZIMAGE +void hyp_mode_check(void); + +/* Reports the availability of HYP mode */ +static inline bool is_hyp_mode_available(void) +{ + return ((__boot_cpu_mode & MODE_MASK) == HYP_MODE && + !(__boot_cpu_mode & BOOT_CPU_MODE_MISMATCH)); +} + +/* Check if the bootloader has booted CPUs in different modes */ +static inline bool is_hyp_mode_mismatched(void) +{ + return !!(__boot_cpu_mode & BOOT_CPU_MODE_MISMATCH); +} +#endif + +#endif /* __ASSEMBLY__ */ + +#endif /* ! VIRT_H */ diff --git a/arch/arm/include/asm/xen/events.h b/arch/arm/include/asm/xen/events.h new file mode 100644 index 0000000000000000000000000000000000000000..94b4e9020b0227465953e3332624424cbc520653 --- /dev/null +++ b/arch/arm/include/asm/xen/events.h @@ -0,0 +1,18 @@ +#ifndef _ASM_ARM_XEN_EVENTS_H +#define _ASM_ARM_XEN_EVENTS_H + +#include + +enum ipi_vector { + XEN_PLACEHOLDER_VECTOR, + + /* Xen IPIs go here */ + XEN_NR_IPIS, +}; + +static inline int xen_irqs_disabled(struct pt_regs *regs) +{ + return raw_irqs_disabled_flags(regs->ARM_cpsr); +} + +#endif /* _ASM_ARM_XEN_EVENTS_H */ diff --git a/arch/arm/include/asm/xen/hypercall.h b/arch/arm/include/asm/xen/hypercall.h new file mode 100644 index 0000000000000000000000000000000000000000..8a823253d775d83337bab6e833d30949e553e49d --- /dev/null +++ b/arch/arm/include/asm/xen/hypercall.h @@ -0,0 +1,69 @@ +/****************************************************************************** + * hypercall.h + * + * Linux-specific hypervisor handling. + * + * Stefano Stabellini , Citrix, 2012 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version 2 + * as published by the Free Software Foundation; or, when distributed + * separately from the Linux kernel or incorporated into other + * software packages, subject to the following license: + * + * Permission is hereby granted, free of charge, to any person obtaining a copy + * of this source file (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, copy, modify, + * merge, publish, distribute, sublicense, and/or sell copies of the Software, + * and to permit persons to whom the Software is furnished to do so, subject to + * the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE + * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS + * IN THE SOFTWARE. + */ + +#ifndef _ASM_ARM_XEN_HYPERCALL_H +#define _ASM_ARM_XEN_HYPERCALL_H + +#include + +long privcmd_call(unsigned call, unsigned long a1, + unsigned long a2, unsigned long a3, + unsigned long a4, unsigned long a5); +int HYPERVISOR_xen_version(int cmd, void *arg); +int HYPERVISOR_console_io(int cmd, int count, char *str); +int HYPERVISOR_grant_table_op(unsigned int cmd, void *uop, unsigned int count); +int HYPERVISOR_sched_op(int cmd, void *arg); +int HYPERVISOR_event_channel_op(int cmd, void *arg); +unsigned long HYPERVISOR_hvm_op(int op, void *arg); +int HYPERVISOR_memory_op(unsigned int cmd, void *arg); +int HYPERVISOR_physdev_op(int cmd, void *arg); + +static inline void +MULTI_update_va_mapping(struct multicall_entry *mcl, unsigned long va, + unsigned int new_val, unsigned long flags) +{ + BUG(); +} + +static inline void +MULTI_mmu_update(struct multicall_entry *mcl, struct mmu_update *req, + int count, int *success_count, domid_t domid) +{ + BUG(); +} + +static inline int +HYPERVISOR_multicall(void *call_list, int nr_calls) +{ + BUG(); +} +#endif /* _ASM_ARM_XEN_HYPERCALL_H */ diff --git a/arch/arm/include/asm/xen/hypervisor.h b/arch/arm/include/asm/xen/hypervisor.h new file mode 100644 index 0000000000000000000000000000000000000000..d7ab99a0c9ebe2499b2c4defca40c0cb4a893358 --- /dev/null +++ b/arch/arm/include/asm/xen/hypervisor.h @@ -0,0 +1,19 @@ +#ifndef _ASM_ARM_XEN_HYPERVISOR_H +#define _ASM_ARM_XEN_HYPERVISOR_H + +extern struct shared_info *HYPERVISOR_shared_info; +extern struct start_info *xen_start_info; + +/* Lazy mode for batching updates / context switch */ +enum paravirt_lazy_mode { + PARAVIRT_LAZY_NONE, + PARAVIRT_LAZY_MMU, + PARAVIRT_LAZY_CPU, +}; + +static inline enum paravirt_lazy_mode paravirt_get_lazy_mode(void) +{ + return PARAVIRT_LAZY_NONE; +} + +#endif /* _ASM_ARM_XEN_HYPERVISOR_H */ diff --git a/arch/arm/include/asm/xen/interface.h b/arch/arm/include/asm/xen/interface.h new file mode 100644 index 0000000000000000000000000000000000000000..ae05e56dd17d6eb2e270117172dbc327f27b82d2 --- /dev/null +++ b/arch/arm/include/asm/xen/interface.h @@ -0,0 +1,73 @@ +/****************************************************************************** + * Guest OS interface to ARM Xen. + * + * Stefano Stabellini , Citrix, 2012 + */ + +#ifndef _ASM_ARM_XEN_INTERFACE_H +#define _ASM_ARM_XEN_INTERFACE_H + +#include + +#define uint64_aligned_t uint64_t __attribute__((aligned(8))) + +#define __DEFINE_GUEST_HANDLE(name, type) \ + typedef struct { union { type *p; uint64_aligned_t q; }; } \ + __guest_handle_ ## name + +#define DEFINE_GUEST_HANDLE_STRUCT(name) \ + __DEFINE_GUEST_HANDLE(name, struct name) +#define DEFINE_GUEST_HANDLE(name) __DEFINE_GUEST_HANDLE(name, name) +#define GUEST_HANDLE(name) __guest_handle_ ## name + +#define set_xen_guest_handle(hnd, val) \ + do { \ + if (sizeof(hnd) == 8) \ + *(uint64_t *)&(hnd) = 0; \ + (hnd).p = val; \ + } while (0) + +#ifndef __ASSEMBLY__ +/* Explicitly size integers that represent pfns in the interface with + * Xen so that we can have one ABI that works for 32 and 64 bit guests. */ +typedef uint64_t xen_pfn_t; +typedef uint64_t xen_ulong_t; +/* Guest handles for primitive C types. */ +__DEFINE_GUEST_HANDLE(uchar, unsigned char); +__DEFINE_GUEST_HANDLE(uint, unsigned int); +__DEFINE_GUEST_HANDLE(ulong, unsigned long); +DEFINE_GUEST_HANDLE(char); +DEFINE_GUEST_HANDLE(int); +DEFINE_GUEST_HANDLE(long); +DEFINE_GUEST_HANDLE(void); +DEFINE_GUEST_HANDLE(uint64_t); +DEFINE_GUEST_HANDLE(uint32_t); +DEFINE_GUEST_HANDLE(xen_pfn_t); + +/* Maximum number of virtual CPUs in multi-processor guests. */ +#define MAX_VIRT_CPUS 1 + +struct arch_vcpu_info { }; +struct arch_shared_info { }; + +/* TODO: Move pvclock definitions some place arch independent */ +struct pvclock_vcpu_time_info { + u32 version; + u32 pad0; + u64 tsc_timestamp; + u64 system_time; + u32 tsc_to_system_mul; + s8 tsc_shift; + u8 flags; + u8 pad[2]; +} __attribute__((__packed__)); /* 32 bytes */ + +/* It is OK to have a 12 bytes struct with no padding because it is packed */ +struct pvclock_wall_clock { + u32 version; + u32 sec; + u32 nsec; +} __attribute__((__packed__)); +#endif + +#endif /* _ASM_ARM_XEN_INTERFACE_H */ diff --git a/arch/arm/include/asm/xen/page.h b/arch/arm/include/asm/xen/page.h new file mode 100644 index 0000000000000000000000000000000000000000..174202318dfff2779ece119e7b45949b82f429e0 --- /dev/null +++ b/arch/arm/include/asm/xen/page.h @@ -0,0 +1,82 @@ +#ifndef _ASM_ARM_XEN_PAGE_H +#define _ASM_ARM_XEN_PAGE_H + +#include +#include + +#include +#include + +#include + +#define pfn_to_mfn(pfn) (pfn) +#define phys_to_machine_mapping_valid (1) +#define mfn_to_pfn(mfn) (mfn) +#define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT)) + +#define pte_mfn pte_pfn +#define mfn_pte pfn_pte + +/* Xen machine address */ +typedef struct xmaddr { + phys_addr_t maddr; +} xmaddr_t; + +/* Xen pseudo-physical address */ +typedef struct xpaddr { + phys_addr_t paddr; +} xpaddr_t; + +#define XMADDR(x) ((xmaddr_t) { .maddr = (x) }) +#define XPADDR(x) ((xpaddr_t) { .paddr = (x) }) + +static inline xmaddr_t phys_to_machine(xpaddr_t phys) +{ + unsigned offset = phys.paddr & ~PAGE_MASK; + return XMADDR(PFN_PHYS(pfn_to_mfn(PFN_DOWN(phys.paddr))) | offset); +} + +static inline xpaddr_t machine_to_phys(xmaddr_t machine) +{ + unsigned offset = machine.maddr & ~PAGE_MASK; + return XPADDR(PFN_PHYS(mfn_to_pfn(PFN_DOWN(machine.maddr))) | offset); +} +/* VIRT <-> MACHINE conversion */ +#define virt_to_machine(v) (phys_to_machine(XPADDR(__pa(v)))) +#define virt_to_pfn(v) (PFN_DOWN(__pa(v))) +#define virt_to_mfn(v) (pfn_to_mfn(virt_to_pfn(v))) +#define mfn_to_virt(m) (__va(mfn_to_pfn(m) << PAGE_SHIFT)) + +static inline xmaddr_t arbitrary_virt_to_machine(void *vaddr) +{ + /* TODO: assuming it is mapped in the kernel 1:1 */ + return virt_to_machine(vaddr); +} + +/* TODO: this shouldn't be here but it is because the frontend drivers + * are using it (its rolled in headers) even though we won't hit the code path. + * So for right now just punt with this. + */ +static inline pte_t *lookup_address(unsigned long address, unsigned int *level) +{ + BUG(); + return NULL; +} + +static inline int m2p_add_override(unsigned long mfn, struct page *page, + struct gnttab_map_grant_ref *kmap_op) +{ + return 0; +} + +static inline int m2p_remove_override(struct page *page, bool clear_pte) +{ + return 0; +} + +static inline bool set_phys_to_machine(unsigned long pfn, unsigned long mfn) +{ + BUG(); + return false; +} +#endif /* _ASM_ARM_XEN_PAGE_H */ diff --git a/arch/arm/include/uapi/asm/Kbuild b/arch/arm/include/uapi/asm/Kbuild new file mode 100644 index 0000000000000000000000000000000000000000..47bcb2d254af8e4fdb3bacee96131d88a0e4f37e --- /dev/null +++ b/arch/arm/include/uapi/asm/Kbuild @@ -0,0 +1,19 @@ +# UAPI Header export list +include include/uapi/asm-generic/Kbuild.asm + +header-y += a.out.h +header-y += byteorder.h +header-y += fcntl.h +header-y += hwcap.h +header-y += ioctls.h +header-y += kvm_para.h +header-y += mman.h +header-y += posix_types.h +header-y += ptrace.h +header-y += setup.h +header-y += sigcontext.h +header-y += signal.h +header-y += stat.h +header-y += statfs.h +header-y += swab.h +header-y += unistd.h diff --git a/arch/arm/include/asm/a.out.h b/arch/arm/include/uapi/asm/a.out.h similarity index 100% rename from arch/arm/include/asm/a.out.h rename to arch/arm/include/uapi/asm/a.out.h diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/uapi/asm/byteorder.h similarity index 100% rename from arch/arm/include/asm/byteorder.h rename to arch/arm/include/uapi/asm/byteorder.h diff --git a/arch/arm/include/asm/fcntl.h b/arch/arm/include/uapi/asm/fcntl.h similarity index 100% rename from arch/arm/include/asm/fcntl.h rename to arch/arm/include/uapi/asm/fcntl.h diff --git a/arch/arm/include/uapi/asm/hwcap.h b/arch/arm/include/uapi/asm/hwcap.h new file mode 100644 index 0000000000000000000000000000000000000000..f254f6503cce7df8aedc3104db344417913d44c1 --- /dev/null +++ b/arch/arm/include/uapi/asm/hwcap.h @@ -0,0 +1,29 @@ +#ifndef _UAPI__ASMARM_HWCAP_H +#define _UAPI__ASMARM_HWCAP_H + +/* + * HWCAP flags - for elf_hwcap (in kernel) and AT_HWCAP + */ +#define HWCAP_SWP (1 << 0) +#define HWCAP_HALF (1 << 1) +#define HWCAP_THUMB (1 << 2) +#define HWCAP_26BIT (1 << 3) /* Play it safe */ +#define HWCAP_FAST_MULT (1 << 4) +#define HWCAP_FPA (1 << 5) +#define HWCAP_VFP (1 << 6) +#define HWCAP_EDSP (1 << 7) +#define HWCAP_JAVA (1 << 8) +#define HWCAP_IWMMXT (1 << 9) +#define HWCAP_CRUNCH (1 << 10) +#define HWCAP_THUMBEE (1 << 11) +#define HWCAP_NEON (1 << 12) +#define HWCAP_VFPv3 (1 << 13) +#define HWCAP_VFPv3D16 (1 << 14) +#define HWCAP_TLS (1 << 15) +#define HWCAP_VFPv4 (1 << 16) +#define HWCAP_IDIVA (1 << 17) +#define HWCAP_IDIVT (1 << 18) +#define HWCAP_IDIV (HWCAP_IDIVA | HWCAP_IDIVT) + + +#endif /* _UAPI__ASMARM_HWCAP_H */ diff --git a/arch/arm/include/asm/ioctls.h b/arch/arm/include/uapi/asm/ioctls.h similarity index 100% rename from arch/arm/include/asm/ioctls.h rename to arch/arm/include/uapi/asm/ioctls.h diff --git a/arch/arm/include/asm/kvm_para.h b/arch/arm/include/uapi/asm/kvm_para.h similarity index 100% rename from arch/arm/include/asm/kvm_para.h rename to arch/arm/include/uapi/asm/kvm_para.h diff --git a/arch/arm/include/asm/mman.h b/arch/arm/include/uapi/asm/mman.h similarity index 100% rename from arch/arm/include/asm/mman.h rename to arch/arm/include/uapi/asm/mman.h diff --git a/arch/arm/include/asm/posix_types.h b/arch/arm/include/uapi/asm/posix_types.h similarity index 100% rename from arch/arm/include/asm/posix_types.h rename to arch/arm/include/uapi/asm/posix_types.h diff --git a/arch/arm/include/uapi/asm/ptrace.h b/arch/arm/include/uapi/asm/ptrace.h new file mode 100644 index 0000000000000000000000000000000000000000..96ee0929790f5d5ad2156f2262c9efb809f7cc3e --- /dev/null +++ b/arch/arm/include/uapi/asm/ptrace.h @@ -0,0 +1,138 @@ +/* + * arch/arm/include/asm/ptrace.h + * + * Copyright (C) 1996-2003 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _UAPI__ASM_ARM_PTRACE_H +#define _UAPI__ASM_ARM_PTRACE_H + +#include + +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +/* PTRACE_ATTACH is 16 */ +/* PTRACE_DETACH is 17 */ +#define PTRACE_GETWMMXREGS 18 +#define PTRACE_SETWMMXREGS 19 +/* 20 is unused */ +#define PTRACE_OLDSETOPTIONS 21 +#define PTRACE_GET_THREAD_AREA 22 +#define PTRACE_SET_SYSCALL 23 +/* PTRACE_SYSCALL is 24 */ +#define PTRACE_GETCRUNCHREGS 25 +#define PTRACE_SETCRUNCHREGS 26 +#define PTRACE_GETVFPREGS 27 +#define PTRACE_SETVFPREGS 28 +#define PTRACE_GETHBPREGS 29 +#define PTRACE_SETHBPREGS 30 + +/* + * PSR bits + */ +#define USR26_MODE 0x00000000 +#define FIQ26_MODE 0x00000001 +#define IRQ26_MODE 0x00000002 +#define SVC26_MODE 0x00000003 +#define USR_MODE 0x00000010 +#define FIQ_MODE 0x00000011 +#define IRQ_MODE 0x00000012 +#define SVC_MODE 0x00000013 +#define ABT_MODE 0x00000017 +#define HYP_MODE 0x0000001a +#define UND_MODE 0x0000001b +#define SYSTEM_MODE 0x0000001f +#define MODE32_BIT 0x00000010 +#define MODE_MASK 0x0000001f +#define PSR_T_BIT 0x00000020 +#define PSR_F_BIT 0x00000040 +#define PSR_I_BIT 0x00000080 +#define PSR_A_BIT 0x00000100 +#define PSR_E_BIT 0x00000200 +#define PSR_J_BIT 0x01000000 +#define PSR_Q_BIT 0x08000000 +#define PSR_V_BIT 0x10000000 +#define PSR_C_BIT 0x20000000 +#define PSR_Z_BIT 0x40000000 +#define PSR_N_BIT 0x80000000 + +/* + * Groups of PSR bits + */ +#define PSR_f 0xff000000 /* Flags */ +#define PSR_s 0x00ff0000 /* Status */ +#define PSR_x 0x0000ff00 /* Extension */ +#define PSR_c 0x000000ff /* Control */ + +/* + * ARMv7 groups of PSR bits + */ +#define APSR_MASK 0xf80f0000 /* N, Z, C, V, Q and GE flags */ +#define PSR_ISET_MASK 0x01000010 /* ISA state (J, T) mask */ +#define PSR_IT_MASK 0x0600fc00 /* If-Then execution state mask */ +#define PSR_ENDIAN_MASK 0x00000200 /* Endianness state mask */ + +/* + * Default endianness state + */ +#ifdef CONFIG_CPU_ENDIAN_BE8 +#define PSR_ENDSTATE PSR_E_BIT +#else +#define PSR_ENDSTATE 0 +#endif + +/* + * These are 'magic' values for PTRACE_PEEKUSR that return info about where a + * process is located in memory. + */ +#define PT_TEXT_ADDR 0x10000 +#define PT_DATA_ADDR 0x10004 +#define PT_TEXT_END_ADDR 0x10008 + +#ifndef __ASSEMBLY__ + +/* + * This struct defines the way the registers are stored on the + * stack during a system call. Note that sizeof(struct pt_regs) + * has to be a multiple of 8. + */ +#ifndef __KERNEL__ +struct pt_regs { + long uregs[18]; +}; +#endif /* __KERNEL__ */ + +#define ARM_cpsr uregs[16] +#define ARM_pc uregs[15] +#define ARM_lr uregs[14] +#define ARM_sp uregs[13] +#define ARM_ip uregs[12] +#define ARM_fp uregs[11] +#define ARM_r10 uregs[10] +#define ARM_r9 uregs[9] +#define ARM_r8 uregs[8] +#define ARM_r7 uregs[7] +#define ARM_r6 uregs[6] +#define ARM_r5 uregs[5] +#define ARM_r4 uregs[4] +#define ARM_r3 uregs[3] +#define ARM_r2 uregs[2] +#define ARM_r1 uregs[1] +#define ARM_r0 uregs[0] +#define ARM_ORIG_r0 uregs[17] + +/* + * The size of the user-visible VFP state as seen by PTRACE_GET/SETVFPREGS + * and core dumps. + */ +#define ARM_VFPREGS_SIZE ( 32 * 8 /*fpregs*/ + 4 /*fpscr*/ ) + + +#endif /* __ASSEMBLY__ */ + +#endif /* _UAPI__ASM_ARM_PTRACE_H */ diff --git a/arch/arm/include/uapi/asm/setup.h b/arch/arm/include/uapi/asm/setup.h new file mode 100644 index 0000000000000000000000000000000000000000..979ff40164040f7e3e38ad699fd8d34a4f5af8c5 --- /dev/null +++ b/arch/arm/include/uapi/asm/setup.h @@ -0,0 +1,187 @@ +/* + * linux/include/asm/setup.h + * + * Copyright (C) 1997-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Structure passed to kernel to tell it about the + * hardware it's running on. See Documentation/arm/Setup + * for more info. + */ +#ifndef _UAPI__ASMARM_SETUP_H +#define _UAPI__ASMARM_SETUP_H + +#include + +#define COMMAND_LINE_SIZE 1024 + +/* The list ends with an ATAG_NONE node. */ +#define ATAG_NONE 0x00000000 + +struct tag_header { + __u32 size; + __u32 tag; +}; + +/* The list must start with an ATAG_CORE node */ +#define ATAG_CORE 0x54410001 + +struct tag_core { + __u32 flags; /* bit 0 = read-only */ + __u32 pagesize; + __u32 rootdev; +}; + +/* it is allowed to have multiple ATAG_MEM nodes */ +#define ATAG_MEM 0x54410002 + +struct tag_mem32 { + __u32 size; + __u32 start; /* physical start address */ +}; + +/* VGA text type displays */ +#define ATAG_VIDEOTEXT 0x54410003 + +struct tag_videotext { + __u8 x; + __u8 y; + __u16 video_page; + __u8 video_mode; + __u8 video_cols; + __u16 video_ega_bx; + __u8 video_lines; + __u8 video_isvga; + __u16 video_points; +}; + +/* describes how the ramdisk will be used in kernel */ +#define ATAG_RAMDISK 0x54410004 + +struct tag_ramdisk { + __u32 flags; /* bit 0 = load, bit 1 = prompt */ + __u32 size; /* decompressed ramdisk size in _kilo_ bytes */ + __u32 start; /* starting block of floppy-based RAM disk image */ +}; + +/* describes where the compressed ramdisk image lives (virtual address) */ +/* + * this one accidentally used virtual addresses - as such, + * it's deprecated. + */ +#define ATAG_INITRD 0x54410005 + +/* describes where the compressed ramdisk image lives (physical address) */ +#define ATAG_INITRD2 0x54420005 + +struct tag_initrd { + __u32 start; /* physical start address */ + __u32 size; /* size of compressed ramdisk image in bytes */ +}; + +/* board serial number. "64 bits should be enough for everybody" */ +#define ATAG_SERIAL 0x54410006 + +struct tag_serialnr { + __u32 low; + __u32 high; +}; + +/* board revision */ +#define ATAG_REVISION 0x54410007 + +struct tag_revision { + __u32 rev; +}; + +/* initial values for vesafb-type framebuffers. see struct screen_info + * in include/linux/tty.h + */ +#define ATAG_VIDEOLFB 0x54410008 + +struct tag_videolfb { + __u16 lfb_width; + __u16 lfb_height; + __u16 lfb_depth; + __u16 lfb_linelength; + __u32 lfb_base; + __u32 lfb_size; + __u8 red_size; + __u8 red_pos; + __u8 green_size; + __u8 green_pos; + __u8 blue_size; + __u8 blue_pos; + __u8 rsvd_size; + __u8 rsvd_pos; +}; + +/* command line: \0 terminated string */ +#define ATAG_CMDLINE 0x54410009 + +struct tag_cmdline { + char cmdline[1]; /* this is the minimum size */ +}; + +/* acorn RiscPC specific information */ +#define ATAG_ACORN 0x41000101 + +struct tag_acorn { + __u32 memc_control_reg; + __u32 vram_pages; + __u8 sounddefault; + __u8 adfsdrives; +}; + +/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */ +#define ATAG_MEMCLK 0x41000402 + +struct tag_memclk { + __u32 fmemclk; +}; + +struct tag { + struct tag_header hdr; + union { + struct tag_core core; + struct tag_mem32 mem; + struct tag_videotext videotext; + struct tag_ramdisk ramdisk; + struct tag_initrd initrd; + struct tag_serialnr serialnr; + struct tag_revision revision; + struct tag_videolfb videolfb; + struct tag_cmdline cmdline; + + /* + * Acorn specific + */ + struct tag_acorn acorn; + + /* + * DC21285 specific + */ + struct tag_memclk memclk; + } u; +}; + +struct tagtable { + __u32 tag; + int (*parse)(const struct tag *); +}; + +#define tag_member_present(tag,member) \ + ((unsigned long)(&((struct tag *)0L)->member + 1) \ + <= (tag)->hdr.size * 4) + +#define tag_next(t) ((struct tag *)((__u32 *)(t) + (t)->hdr.size)) +#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2) + +#define for_each_tag(t,base) \ + for (t = base; t->hdr.size; t = tag_next(t)) + + +#endif /* _UAPI__ASMARM_SETUP_H */ diff --git a/arch/arm/include/asm/sigcontext.h b/arch/arm/include/uapi/asm/sigcontext.h similarity index 100% rename from arch/arm/include/asm/sigcontext.h rename to arch/arm/include/uapi/asm/sigcontext.h diff --git a/arch/arm/include/uapi/asm/signal.h b/arch/arm/include/uapi/asm/signal.h new file mode 100644 index 0000000000000000000000000000000000000000..921c57fdc52e13802076b632f3b571266703f06b --- /dev/null +++ b/arch/arm/include/uapi/asm/signal.h @@ -0,0 +1,127 @@ +#ifndef _UAPI_ASMARM_SIGNAL_H +#define _UAPI_ASMARM_SIGNAL_H + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifndef __KERNEL__ +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +#define SIGSWI 32 + +/* + * SA_FLAGS values: + * + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_SIGINFO deliver the signal with SIGINFO structs + * SA_THIRTYTWO delivers the signal in 32-bit mode, even if the task + * is running in 26-bit. + * SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)). + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NODEFER prevents the current signal from being masked in the handler. + * SA_RESETHAND clears the handler when the signal is delivered. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 +#define SA_SIGINFO 0x00000004 +#define SA_THIRTYTWO 0x02000000 +#define SA_RESTORER 0x04000000 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND + + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#include + +#ifndef __KERNEL__ +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void __user *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + + +#endif /* _UAPI_ASMARM_SIGNAL_H */ diff --git a/arch/arm/include/asm/stat.h b/arch/arm/include/uapi/asm/stat.h similarity index 100% rename from arch/arm/include/asm/stat.h rename to arch/arm/include/uapi/asm/stat.h diff --git a/arch/arm/include/asm/statfs.h b/arch/arm/include/uapi/asm/statfs.h similarity index 100% rename from arch/arm/include/asm/statfs.h rename to arch/arm/include/uapi/asm/statfs.h diff --git a/arch/arm/include/uapi/asm/swab.h b/arch/arm/include/uapi/asm/swab.h new file mode 100644 index 0000000000000000000000000000000000000000..6fcb32a5c453813905b8156ef179ef129b6d6aa5 --- /dev/null +++ b/arch/arm/include/uapi/asm/swab.h @@ -0,0 +1,53 @@ +/* + * arch/arm/include/asm/byteorder.h + * + * ARM Endian-ness. In little endian mode, the data bus is connected such + * that byte accesses appear as: + * 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31 + * and word accesses (data or instruction) appear as: + * d0...d31 + * + * When in big endian mode, byte accesses appear as: + * 0 = d24...d31, 1 = d16...d23, 2 = d8...d15, 3 = d0...d7 + * and word accesses (data or instruction) appear as: + * d0...d31 + */ +#ifndef _UAPI__ASM_ARM_SWAB_H +#define _UAPI__ASM_ARM_SWAB_H + +#include +#include + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __SWAB_64_THRU_32__ +#endif + + +#if !defined(__KERNEL__) || __LINUX_ARM_ARCH__ < 6 +static inline __attribute_const__ __u32 __arch_swab32(__u32 x) +{ + __u32 t; + +#ifndef __thumb__ + if (!__builtin_constant_p(x)) { + /* + * The compiler needs a bit of a hint here to always do the + * right thing and not screw it up to different degrees + * depending on the gcc version. + */ + asm ("eor\t%0, %1, %1, ror #16" : "=r" (t) : "r" (x)); + } else +#endif + t = x ^ ((x << 16) | (x >> 16)); /* eor r1,r0,r0,ror #16 */ + + x = (x << 24) | (x >> 8); /* mov r0,r0,ror #8 */ + t &= ~0x00FF0000; /* bic r1,r1,#0x00FF0000 */ + x ^= (t >> 8); /* eor r0,r0,r1,lsr #8 */ + + return x; +} +#define __arch_swab32 __arch_swab32 + +#endif + +#endif /* _UAPI__ASM_ARM_SWAB_H */ diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h new file mode 100644 index 0000000000000000000000000000000000000000..ac03bdb4ae442a5e7b0a69cf0252ad84894c1b58 --- /dev/null +++ b/arch/arm/include/uapi/asm/unistd.h @@ -0,0 +1,450 @@ +/* + * arch/arm/include/asm/unistd.h + * + * Copyright (C) 2001-2005 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Please forward _all_ changes to this file to rmk@arm.linux.org.uk, + * no matter what the change is. Thanks! + */ +#ifndef _UAPI__ASM_ARM_UNISTD_H +#define _UAPI__ASM_ARM_UNISTD_H + +#define __NR_OABI_SYSCALL_BASE 0x900000 + +#if defined(__thumb__) || defined(__ARM_EABI__) +#define __NR_SYSCALL_BASE 0 +#else +#define __NR_SYSCALL_BASE __NR_OABI_SYSCALL_BASE +#endif + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0) +#define __NR_exit (__NR_SYSCALL_BASE+ 1) +#define __NR_fork (__NR_SYSCALL_BASE+ 2) +#define __NR_read (__NR_SYSCALL_BASE+ 3) +#define __NR_write (__NR_SYSCALL_BASE+ 4) +#define __NR_open (__NR_SYSCALL_BASE+ 5) +#define __NR_close (__NR_SYSCALL_BASE+ 6) + /* 7 was sys_waitpid */ +#define __NR_creat (__NR_SYSCALL_BASE+ 8) +#define __NR_link (__NR_SYSCALL_BASE+ 9) +#define __NR_unlink (__NR_SYSCALL_BASE+ 10) +#define __NR_execve (__NR_SYSCALL_BASE+ 11) +#define __NR_chdir (__NR_SYSCALL_BASE+ 12) +#define __NR_time (__NR_SYSCALL_BASE+ 13) +#define __NR_mknod (__NR_SYSCALL_BASE+ 14) +#define __NR_chmod (__NR_SYSCALL_BASE+ 15) +#define __NR_lchown (__NR_SYSCALL_BASE+ 16) + /* 17 was sys_break */ + /* 18 was sys_stat */ +#define __NR_lseek (__NR_SYSCALL_BASE+ 19) +#define __NR_getpid (__NR_SYSCALL_BASE+ 20) +#define __NR_mount (__NR_SYSCALL_BASE+ 21) +#define __NR_umount (__NR_SYSCALL_BASE+ 22) +#define __NR_setuid (__NR_SYSCALL_BASE+ 23) +#define __NR_getuid (__NR_SYSCALL_BASE+ 24) +#define __NR_stime (__NR_SYSCALL_BASE+ 25) +#define __NR_ptrace (__NR_SYSCALL_BASE+ 26) +#define __NR_alarm (__NR_SYSCALL_BASE+ 27) + /* 28 was sys_fstat */ +#define __NR_pause (__NR_SYSCALL_BASE+ 29) +#define __NR_utime (__NR_SYSCALL_BASE+ 30) + /* 31 was sys_stty */ + /* 32 was sys_gtty */ +#define __NR_access (__NR_SYSCALL_BASE+ 33) +#define __NR_nice (__NR_SYSCALL_BASE+ 34) + /* 35 was sys_ftime */ +#define __NR_sync (__NR_SYSCALL_BASE+ 36) +#define __NR_kill (__NR_SYSCALL_BASE+ 37) +#define __NR_rename (__NR_SYSCALL_BASE+ 38) +#define __NR_mkdir (__NR_SYSCALL_BASE+ 39) +#define __NR_rmdir (__NR_SYSCALL_BASE+ 40) +#define __NR_dup (__NR_SYSCALL_BASE+ 41) +#define __NR_pipe (__NR_SYSCALL_BASE+ 42) +#define __NR_times (__NR_SYSCALL_BASE+ 43) + /* 44 was sys_prof */ +#define __NR_brk (__NR_SYSCALL_BASE+ 45) +#define __NR_setgid (__NR_SYSCALL_BASE+ 46) +#define __NR_getgid (__NR_SYSCALL_BASE+ 47) + /* 48 was sys_signal */ +#define __NR_geteuid (__NR_SYSCALL_BASE+ 49) +#define __NR_getegid (__NR_SYSCALL_BASE+ 50) +#define __NR_acct (__NR_SYSCALL_BASE+ 51) +#define __NR_umount2 (__NR_SYSCALL_BASE+ 52) + /* 53 was sys_lock */ +#define __NR_ioctl (__NR_SYSCALL_BASE+ 54) +#define __NR_fcntl (__NR_SYSCALL_BASE+ 55) + /* 56 was sys_mpx */ +#define __NR_setpgid (__NR_SYSCALL_BASE+ 57) + /* 58 was sys_ulimit */ + /* 59 was sys_olduname */ +#define __NR_umask (__NR_SYSCALL_BASE+ 60) +#define __NR_chroot (__NR_SYSCALL_BASE+ 61) +#define __NR_ustat (__NR_SYSCALL_BASE+ 62) +#define __NR_dup2 (__NR_SYSCALL_BASE+ 63) +#define __NR_getppid (__NR_SYSCALL_BASE+ 64) +#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65) +#define __NR_setsid (__NR_SYSCALL_BASE+ 66) +#define __NR_sigaction (__NR_SYSCALL_BASE+ 67) + /* 68 was sys_sgetmask */ + /* 69 was sys_ssetmask */ +#define __NR_setreuid (__NR_SYSCALL_BASE+ 70) +#define __NR_setregid (__NR_SYSCALL_BASE+ 71) +#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72) +#define __NR_sigpending (__NR_SYSCALL_BASE+ 73) +#define __NR_sethostname (__NR_SYSCALL_BASE+ 74) +#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75) +#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */ +#define __NR_getrusage (__NR_SYSCALL_BASE+ 77) +#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78) +#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79) +#define __NR_getgroups (__NR_SYSCALL_BASE+ 80) +#define __NR_setgroups (__NR_SYSCALL_BASE+ 81) +#define __NR_select (__NR_SYSCALL_BASE+ 82) +#define __NR_symlink (__NR_SYSCALL_BASE+ 83) + /* 84 was sys_lstat */ +#define __NR_readlink (__NR_SYSCALL_BASE+ 85) +#define __NR_uselib (__NR_SYSCALL_BASE+ 86) +#define __NR_swapon (__NR_SYSCALL_BASE+ 87) +#define __NR_reboot (__NR_SYSCALL_BASE+ 88) +#define __NR_readdir (__NR_SYSCALL_BASE+ 89) +#define __NR_mmap (__NR_SYSCALL_BASE+ 90) +#define __NR_munmap (__NR_SYSCALL_BASE+ 91) +#define __NR_truncate (__NR_SYSCALL_BASE+ 92) +#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93) +#define __NR_fchmod (__NR_SYSCALL_BASE+ 94) +#define __NR_fchown (__NR_SYSCALL_BASE+ 95) +#define __NR_getpriority (__NR_SYSCALL_BASE+ 96) +#define __NR_setpriority (__NR_SYSCALL_BASE+ 97) + /* 98 was sys_profil */ +#define __NR_statfs (__NR_SYSCALL_BASE+ 99) +#define __NR_fstatfs (__NR_SYSCALL_BASE+100) + /* 101 was sys_ioperm */ +#define __NR_socketcall (__NR_SYSCALL_BASE+102) +#define __NR_syslog (__NR_SYSCALL_BASE+103) +#define __NR_setitimer (__NR_SYSCALL_BASE+104) +#define __NR_getitimer (__NR_SYSCALL_BASE+105) +#define __NR_stat (__NR_SYSCALL_BASE+106) +#define __NR_lstat (__NR_SYSCALL_BASE+107) +#define __NR_fstat (__NR_SYSCALL_BASE+108) + /* 109 was sys_uname */ + /* 110 was sys_iopl */ +#define __NR_vhangup (__NR_SYSCALL_BASE+111) + /* 112 was sys_idle */ +#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */ +#define __NR_wait4 (__NR_SYSCALL_BASE+114) +#define __NR_swapoff (__NR_SYSCALL_BASE+115) +#define __NR_sysinfo (__NR_SYSCALL_BASE+116) +#define __NR_ipc (__NR_SYSCALL_BASE+117) +#define __NR_fsync (__NR_SYSCALL_BASE+118) +#define __NR_sigreturn (__NR_SYSCALL_BASE+119) +#define __NR_clone (__NR_SYSCALL_BASE+120) +#define __NR_setdomainname (__NR_SYSCALL_BASE+121) +#define __NR_uname (__NR_SYSCALL_BASE+122) + /* 123 was sys_modify_ldt */ +#define __NR_adjtimex (__NR_SYSCALL_BASE+124) +#define __NR_mprotect (__NR_SYSCALL_BASE+125) +#define __NR_sigprocmask (__NR_SYSCALL_BASE+126) + /* 127 was sys_create_module */ +#define __NR_init_module (__NR_SYSCALL_BASE+128) +#define __NR_delete_module (__NR_SYSCALL_BASE+129) + /* 130 was sys_get_kernel_syms */ +#define __NR_quotactl (__NR_SYSCALL_BASE+131) +#define __NR_getpgid (__NR_SYSCALL_BASE+132) +#define __NR_fchdir (__NR_SYSCALL_BASE+133) +#define __NR_bdflush (__NR_SYSCALL_BASE+134) +#define __NR_sysfs (__NR_SYSCALL_BASE+135) +#define __NR_personality (__NR_SYSCALL_BASE+136) + /* 137 was sys_afs_syscall */ +#define __NR_setfsuid (__NR_SYSCALL_BASE+138) +#define __NR_setfsgid (__NR_SYSCALL_BASE+139) +#define __NR__llseek (__NR_SYSCALL_BASE+140) +#define __NR_getdents (__NR_SYSCALL_BASE+141) +#define __NR__newselect (__NR_SYSCALL_BASE+142) +#define __NR_flock (__NR_SYSCALL_BASE+143) +#define __NR_msync (__NR_SYSCALL_BASE+144) +#define __NR_readv (__NR_SYSCALL_BASE+145) +#define __NR_writev (__NR_SYSCALL_BASE+146) +#define __NR_getsid (__NR_SYSCALL_BASE+147) +#define __NR_fdatasync (__NR_SYSCALL_BASE+148) +#define __NR__sysctl (__NR_SYSCALL_BASE+149) +#define __NR_mlock (__NR_SYSCALL_BASE+150) +#define __NR_munlock (__NR_SYSCALL_BASE+151) +#define __NR_mlockall (__NR_SYSCALL_BASE+152) +#define __NR_munlockall (__NR_SYSCALL_BASE+153) +#define __NR_sched_setparam (__NR_SYSCALL_BASE+154) +#define __NR_sched_getparam (__NR_SYSCALL_BASE+155) +#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156) +#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157) +#define __NR_sched_yield (__NR_SYSCALL_BASE+158) +#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159) +#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160) +#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161) +#define __NR_nanosleep (__NR_SYSCALL_BASE+162) +#define __NR_mremap (__NR_SYSCALL_BASE+163) +#define __NR_setresuid (__NR_SYSCALL_BASE+164) +#define __NR_getresuid (__NR_SYSCALL_BASE+165) + /* 166 was sys_vm86 */ + /* 167 was sys_query_module */ +#define __NR_poll (__NR_SYSCALL_BASE+168) +#define __NR_nfsservctl (__NR_SYSCALL_BASE+169) +#define __NR_setresgid (__NR_SYSCALL_BASE+170) +#define __NR_getresgid (__NR_SYSCALL_BASE+171) +#define __NR_prctl (__NR_SYSCALL_BASE+172) +#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173) +#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174) +#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175) +#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176) +#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177) +#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178) +#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179) +#define __NR_pread64 (__NR_SYSCALL_BASE+180) +#define __NR_pwrite64 (__NR_SYSCALL_BASE+181) +#define __NR_chown (__NR_SYSCALL_BASE+182) +#define __NR_getcwd (__NR_SYSCALL_BASE+183) +#define __NR_capget (__NR_SYSCALL_BASE+184) +#define __NR_capset (__NR_SYSCALL_BASE+185) +#define __NR_sigaltstack (__NR_SYSCALL_BASE+186) +#define __NR_sendfile (__NR_SYSCALL_BASE+187) + /* 188 reserved */ + /* 189 reserved */ +#define __NR_vfork (__NR_SYSCALL_BASE+190) +#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */ +#define __NR_mmap2 (__NR_SYSCALL_BASE+192) +#define __NR_truncate64 (__NR_SYSCALL_BASE+193) +#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194) +#define __NR_stat64 (__NR_SYSCALL_BASE+195) +#define __NR_lstat64 (__NR_SYSCALL_BASE+196) +#define __NR_fstat64 (__NR_SYSCALL_BASE+197) +#define __NR_lchown32 (__NR_SYSCALL_BASE+198) +#define __NR_getuid32 (__NR_SYSCALL_BASE+199) +#define __NR_getgid32 (__NR_SYSCALL_BASE+200) +#define __NR_geteuid32 (__NR_SYSCALL_BASE+201) +#define __NR_getegid32 (__NR_SYSCALL_BASE+202) +#define __NR_setreuid32 (__NR_SYSCALL_BASE+203) +#define __NR_setregid32 (__NR_SYSCALL_BASE+204) +#define __NR_getgroups32 (__NR_SYSCALL_BASE+205) +#define __NR_setgroups32 (__NR_SYSCALL_BASE+206) +#define __NR_fchown32 (__NR_SYSCALL_BASE+207) +#define __NR_setresuid32 (__NR_SYSCALL_BASE+208) +#define __NR_getresuid32 (__NR_SYSCALL_BASE+209) +#define __NR_setresgid32 (__NR_SYSCALL_BASE+210) +#define __NR_getresgid32 (__NR_SYSCALL_BASE+211) +#define __NR_chown32 (__NR_SYSCALL_BASE+212) +#define __NR_setuid32 (__NR_SYSCALL_BASE+213) +#define __NR_setgid32 (__NR_SYSCALL_BASE+214) +#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215) +#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216) +#define __NR_getdents64 (__NR_SYSCALL_BASE+217) +#define __NR_pivot_root (__NR_SYSCALL_BASE+218) +#define __NR_mincore (__NR_SYSCALL_BASE+219) +#define __NR_madvise (__NR_SYSCALL_BASE+220) +#define __NR_fcntl64 (__NR_SYSCALL_BASE+221) + /* 222 for tux */ + /* 223 is unused */ +#define __NR_gettid (__NR_SYSCALL_BASE+224) +#define __NR_readahead (__NR_SYSCALL_BASE+225) +#define __NR_setxattr (__NR_SYSCALL_BASE+226) +#define __NR_lsetxattr (__NR_SYSCALL_BASE+227) +#define __NR_fsetxattr (__NR_SYSCALL_BASE+228) +#define __NR_getxattr (__NR_SYSCALL_BASE+229) +#define __NR_lgetxattr (__NR_SYSCALL_BASE+230) +#define __NR_fgetxattr (__NR_SYSCALL_BASE+231) +#define __NR_listxattr (__NR_SYSCALL_BASE+232) +#define __NR_llistxattr (__NR_SYSCALL_BASE+233) +#define __NR_flistxattr (__NR_SYSCALL_BASE+234) +#define __NR_removexattr (__NR_SYSCALL_BASE+235) +#define __NR_lremovexattr (__NR_SYSCALL_BASE+236) +#define __NR_fremovexattr (__NR_SYSCALL_BASE+237) +#define __NR_tkill (__NR_SYSCALL_BASE+238) +#define __NR_sendfile64 (__NR_SYSCALL_BASE+239) +#define __NR_futex (__NR_SYSCALL_BASE+240) +#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241) +#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242) +#define __NR_io_setup (__NR_SYSCALL_BASE+243) +#define __NR_io_destroy (__NR_SYSCALL_BASE+244) +#define __NR_io_getevents (__NR_SYSCALL_BASE+245) +#define __NR_io_submit (__NR_SYSCALL_BASE+246) +#define __NR_io_cancel (__NR_SYSCALL_BASE+247) +#define __NR_exit_group (__NR_SYSCALL_BASE+248) +#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249) +#define __NR_epoll_create (__NR_SYSCALL_BASE+250) +#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251) +#define __NR_epoll_wait (__NR_SYSCALL_BASE+252) +#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253) + /* 254 for set_thread_area */ + /* 255 for get_thread_area */ +#define __NR_set_tid_address (__NR_SYSCALL_BASE+256) +#define __NR_timer_create (__NR_SYSCALL_BASE+257) +#define __NR_timer_settime (__NR_SYSCALL_BASE+258) +#define __NR_timer_gettime (__NR_SYSCALL_BASE+259) +#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260) +#define __NR_timer_delete (__NR_SYSCALL_BASE+261) +#define __NR_clock_settime (__NR_SYSCALL_BASE+262) +#define __NR_clock_gettime (__NR_SYSCALL_BASE+263) +#define __NR_clock_getres (__NR_SYSCALL_BASE+264) +#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265) +#define __NR_statfs64 (__NR_SYSCALL_BASE+266) +#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267) +#define __NR_tgkill (__NR_SYSCALL_BASE+268) +#define __NR_utimes (__NR_SYSCALL_BASE+269) +#define __NR_arm_fadvise64_64 (__NR_SYSCALL_BASE+270) +#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271) +#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272) +#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273) +#define __NR_mq_open (__NR_SYSCALL_BASE+274) +#define __NR_mq_unlink (__NR_SYSCALL_BASE+275) +#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276) +#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277) +#define __NR_mq_notify (__NR_SYSCALL_BASE+278) +#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279) +#define __NR_waitid (__NR_SYSCALL_BASE+280) +#define __NR_socket (__NR_SYSCALL_BASE+281) +#define __NR_bind (__NR_SYSCALL_BASE+282) +#define __NR_connect (__NR_SYSCALL_BASE+283) +#define __NR_listen (__NR_SYSCALL_BASE+284) +#define __NR_accept (__NR_SYSCALL_BASE+285) +#define __NR_getsockname (__NR_SYSCALL_BASE+286) +#define __NR_getpeername (__NR_SYSCALL_BASE+287) +#define __NR_socketpair (__NR_SYSCALL_BASE+288) +#define __NR_send (__NR_SYSCALL_BASE+289) +#define __NR_sendto (__NR_SYSCALL_BASE+290) +#define __NR_recv (__NR_SYSCALL_BASE+291) +#define __NR_recvfrom (__NR_SYSCALL_BASE+292) +#define __NR_shutdown (__NR_SYSCALL_BASE+293) +#define __NR_setsockopt (__NR_SYSCALL_BASE+294) +#define __NR_getsockopt (__NR_SYSCALL_BASE+295) +#define __NR_sendmsg (__NR_SYSCALL_BASE+296) +#define __NR_recvmsg (__NR_SYSCALL_BASE+297) +#define __NR_semop (__NR_SYSCALL_BASE+298) +#define __NR_semget (__NR_SYSCALL_BASE+299) +#define __NR_semctl (__NR_SYSCALL_BASE+300) +#define __NR_msgsnd (__NR_SYSCALL_BASE+301) +#define __NR_msgrcv (__NR_SYSCALL_BASE+302) +#define __NR_msgget (__NR_SYSCALL_BASE+303) +#define __NR_msgctl (__NR_SYSCALL_BASE+304) +#define __NR_shmat (__NR_SYSCALL_BASE+305) +#define __NR_shmdt (__NR_SYSCALL_BASE+306) +#define __NR_shmget (__NR_SYSCALL_BASE+307) +#define __NR_shmctl (__NR_SYSCALL_BASE+308) +#define __NR_add_key (__NR_SYSCALL_BASE+309) +#define __NR_request_key (__NR_SYSCALL_BASE+310) +#define __NR_keyctl (__NR_SYSCALL_BASE+311) +#define __NR_semtimedop (__NR_SYSCALL_BASE+312) +#define __NR_vserver (__NR_SYSCALL_BASE+313) +#define __NR_ioprio_set (__NR_SYSCALL_BASE+314) +#define __NR_ioprio_get (__NR_SYSCALL_BASE+315) +#define __NR_inotify_init (__NR_SYSCALL_BASE+316) +#define __NR_inotify_add_watch (__NR_SYSCALL_BASE+317) +#define __NR_inotify_rm_watch (__NR_SYSCALL_BASE+318) +#define __NR_mbind (__NR_SYSCALL_BASE+319) +#define __NR_get_mempolicy (__NR_SYSCALL_BASE+320) +#define __NR_set_mempolicy (__NR_SYSCALL_BASE+321) +#define __NR_openat (__NR_SYSCALL_BASE+322) +#define __NR_mkdirat (__NR_SYSCALL_BASE+323) +#define __NR_mknodat (__NR_SYSCALL_BASE+324) +#define __NR_fchownat (__NR_SYSCALL_BASE+325) +#define __NR_futimesat (__NR_SYSCALL_BASE+326) +#define __NR_fstatat64 (__NR_SYSCALL_BASE+327) +#define __NR_unlinkat (__NR_SYSCALL_BASE+328) +#define __NR_renameat (__NR_SYSCALL_BASE+329) +#define __NR_linkat (__NR_SYSCALL_BASE+330) +#define __NR_symlinkat (__NR_SYSCALL_BASE+331) +#define __NR_readlinkat (__NR_SYSCALL_BASE+332) +#define __NR_fchmodat (__NR_SYSCALL_BASE+333) +#define __NR_faccessat (__NR_SYSCALL_BASE+334) +#define __NR_pselect6 (__NR_SYSCALL_BASE+335) +#define __NR_ppoll (__NR_SYSCALL_BASE+336) +#define __NR_unshare (__NR_SYSCALL_BASE+337) +#define __NR_set_robust_list (__NR_SYSCALL_BASE+338) +#define __NR_get_robust_list (__NR_SYSCALL_BASE+339) +#define __NR_splice (__NR_SYSCALL_BASE+340) +#define __NR_arm_sync_file_range (__NR_SYSCALL_BASE+341) +#define __NR_sync_file_range2 __NR_arm_sync_file_range +#define __NR_tee (__NR_SYSCALL_BASE+342) +#define __NR_vmsplice (__NR_SYSCALL_BASE+343) +#define __NR_move_pages (__NR_SYSCALL_BASE+344) +#define __NR_getcpu (__NR_SYSCALL_BASE+345) +#define __NR_epoll_pwait (__NR_SYSCALL_BASE+346) +#define __NR_kexec_load (__NR_SYSCALL_BASE+347) +#define __NR_utimensat (__NR_SYSCALL_BASE+348) +#define __NR_signalfd (__NR_SYSCALL_BASE+349) +#define __NR_timerfd_create (__NR_SYSCALL_BASE+350) +#define __NR_eventfd (__NR_SYSCALL_BASE+351) +#define __NR_fallocate (__NR_SYSCALL_BASE+352) +#define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) +#define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) +#define __NR_signalfd4 (__NR_SYSCALL_BASE+355) +#define __NR_eventfd2 (__NR_SYSCALL_BASE+356) +#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357) +#define __NR_dup3 (__NR_SYSCALL_BASE+358) +#define __NR_pipe2 (__NR_SYSCALL_BASE+359) +#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) +#define __NR_preadv (__NR_SYSCALL_BASE+361) +#define __NR_pwritev (__NR_SYSCALL_BASE+362) +#define __NR_rt_tgsigqueueinfo (__NR_SYSCALL_BASE+363) +#define __NR_perf_event_open (__NR_SYSCALL_BASE+364) +#define __NR_recvmmsg (__NR_SYSCALL_BASE+365) +#define __NR_accept4 (__NR_SYSCALL_BASE+366) +#define __NR_fanotify_init (__NR_SYSCALL_BASE+367) +#define __NR_fanotify_mark (__NR_SYSCALL_BASE+368) +#define __NR_prlimit64 (__NR_SYSCALL_BASE+369) +#define __NR_name_to_handle_at (__NR_SYSCALL_BASE+370) +#define __NR_open_by_handle_at (__NR_SYSCALL_BASE+371) +#define __NR_clock_adjtime (__NR_SYSCALL_BASE+372) +#define __NR_syncfs (__NR_SYSCALL_BASE+373) +#define __NR_sendmmsg (__NR_SYSCALL_BASE+374) +#define __NR_setns (__NR_SYSCALL_BASE+375) +#define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) +#define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) + /* 378 for kcmp */ + +/* + * This may need to be greater than __NR_last_syscall+1 in order to + * account for the padding in the syscall table + */ + +/* + * The following SWIs are ARM private. + */ +#define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000) +#define __ARM_NR_breakpoint (__ARM_NR_BASE+1) +#define __ARM_NR_cacheflush (__ARM_NR_BASE+2) +#define __ARM_NR_usr26 (__ARM_NR_BASE+3) +#define __ARM_NR_usr32 (__ARM_NR_BASE+4) +#define __ARM_NR_set_tls (__ARM_NR_BASE+5) + +/* + * *NOTE*: This is a ghost syscall private to the kernel. Only the + * __kuser_cmpxchg code in entry-armv.S should be aware of its + * existence. Don't ever use this from user code. + */ + +/* + * The following syscalls are obsolete and no longer available for EABI. + */ +#if !defined(__KERNEL__) +#if defined(__ARM_EABI__) +#undef __NR_time +#undef __NR_umount +#undef __NR_stime +#undef __NR_alarm +#undef __NR_utime +#undef __NR_getrlimit +#undef __NR_select +#undef __NR_readdir +#undef __NR_mmap +#undef __NR_socketcall +#undef __NR_syscall +#undef __NR_ipc +#endif +#endif + +#endif /* _UAPI__ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index d81f3a6d9ad84df7917d2a1edefb68b0dcae6ac9..5bbec7b8183e46e0d5ba4f078ba146789f409be1 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -19,7 +19,9 @@ obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \ process.o ptrace.o return_address.o sched_clock.o \ setup.o signal.o stacktrace.o sys_arm.o time.o traps.o -obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o +obj-$(CONFIG_ATAGS) += atags_parse.o +obj-$(CONFIG_ATAGS_PROC) += atags_proc.o +obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o obj-$(CONFIG_OC_ETM) += etm.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o @@ -51,7 +53,6 @@ test-kprobes-objs += kprobes-test-thumb.o else test-kprobes-objs += kprobes-test-arm.o endif -obj-$(CONFIG_ATAGS_PROC) += atags.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_KGDB) += kgdb.o @@ -80,4 +81,6 @@ head-y := head$(MMUEXT).o obj-$(CONFIG_DEBUG_LL) += debug.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-$(CONFIG_ARM_VIRT_EXT) += hyp-stub.o + extra-y := $(head-y) vmlinux.lds diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c index cf258807160d6506cbfdb21df74758f75de04dfe..c8ef20747ee75a5b0426c8338b2bfb068e2d376e 100644 --- a/arch/arm/kernel/arch_timer.c +++ b/arch/arm/kernel/arch_timer.c @@ -21,18 +21,28 @@ #include #include +#include #include #include #include #include static unsigned long arch_timer_rate; -static int arch_timer_ppi; -static int arch_timer_ppi2; + +enum ppi_nr { + PHYS_SECURE_PPI, + PHYS_NONSECURE_PPI, + VIRT_PPI, + HYP_PPI, + MAX_TIMER_PPI +}; + +static int arch_timer_ppi[MAX_TIMER_PPI]; static struct clock_event_device __percpu **arch_timer_evt; +static struct delay_timer arch_delay_timer; -extern void init_current_timer_delay(unsigned long freq); +static bool arch_timer_use_virtual = true; /* * Architected system timer support. @@ -46,50 +56,104 @@ extern void init_current_timer_delay(unsigned long freq); #define ARCH_TIMER_REG_FREQ 1 #define ARCH_TIMER_REG_TVAL 2 -static void arch_timer_reg_write(int reg, u32 val) +#define ARCH_TIMER_PHYS_ACCESS 0 +#define ARCH_TIMER_VIRT_ACCESS 1 + +/* + * These register accessors are marked inline so the compiler can + * nicely work out which register we want, and chuck away the rest of + * the code. At least it does so with a recent GCC (4.6.3). + */ +static inline void arch_timer_reg_write(const int access, const int reg, u32 val) { - switch (reg) { - case ARCH_TIMER_REG_CTRL: - asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val)); - break; - case ARCH_TIMER_REG_TVAL: - asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val)); - break; + if (access == ARCH_TIMER_PHYS_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val)); + break; + } + } + + if (access == ARCH_TIMER_VIRT_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mcr p15, 0, %0, c14, c3, 1" : : "r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mcr p15, 0, %0, c14, c3, 0" : : "r" (val)); + break; + } } isb(); } -static u32 arch_timer_reg_read(int reg) +static inline u32 arch_timer_reg_read(const int access, const int reg) { - u32 val; + u32 val = 0; + + if (access == ARCH_TIMER_PHYS_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val)); + break; + case ARCH_TIMER_REG_FREQ: + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val)); + break; + } + } - switch (reg) { - case ARCH_TIMER_REG_CTRL: - asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val)); - break; - case ARCH_TIMER_REG_FREQ: - asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val)); - break; - case ARCH_TIMER_REG_TVAL: - asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val)); - break; - default: - BUG(); + if (access == ARCH_TIMER_VIRT_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mrc p15, 0, %0, c14, c3, 1" : "=r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mrc p15, 0, %0, c14, c3, 0" : "=r" (val)); + break; + } } return val; } -static irqreturn_t arch_timer_handler(int irq, void *dev_id) +static inline cycle_t arch_timer_counter_read(const int access) { - struct clock_event_device *evt = *(struct clock_event_device **)dev_id; - unsigned long ctrl; + cycle_t cval = 0; + + if (access == ARCH_TIMER_PHYS_ACCESS) + asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (cval)); + + if (access == ARCH_TIMER_VIRT_ACCESS) + asm volatile("mrrc p15, 1, %Q0, %R0, c14" : "=r" (cval)); + + return cval; +} + +static inline cycle_t arch_counter_get_cntpct(void) +{ + return arch_timer_counter_read(ARCH_TIMER_PHYS_ACCESS); +} - ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL); +static inline cycle_t arch_counter_get_cntvct(void) +{ + return arch_timer_counter_read(ARCH_TIMER_VIRT_ACCESS); +} + +static irqreturn_t inline timer_handler(const int access, + struct clock_event_device *evt) +{ + unsigned long ctrl; + ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL); if (ctrl & ARCH_TIMER_CTRL_IT_STAT) { ctrl |= ARCH_TIMER_CTRL_IT_MASK; - arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl); + arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl); evt->event_handler(evt); return IRQ_HANDLED; } @@ -97,63 +161,100 @@ static irqreturn_t arch_timer_handler(int irq, void *dev_id) return IRQ_NONE; } -static void arch_timer_disable(void) +static irqreturn_t arch_timer_handler_virt(int irq, void *dev_id) { - unsigned long ctrl; + struct clock_event_device *evt = *(struct clock_event_device **)dev_id; - ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL); - ctrl &= ~ARCH_TIMER_CTRL_ENABLE; - arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl); + return timer_handler(ARCH_TIMER_VIRT_ACCESS, evt); } -static void arch_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) +static irqreturn_t arch_timer_handler_phys(int irq, void *dev_id) { + struct clock_event_device *evt = *(struct clock_event_device **)dev_id; + + return timer_handler(ARCH_TIMER_PHYS_ACCESS, evt); +} + +static inline void timer_set_mode(const int access, int mode) +{ + unsigned long ctrl; switch (mode) { case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: - arch_timer_disable(); + ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL); + ctrl &= ~ARCH_TIMER_CTRL_ENABLE; + arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl); break; default: break; } } -static int arch_timer_set_next_event(unsigned long evt, - struct clock_event_device *unused) +static void arch_timer_set_mode_virt(enum clock_event_mode mode, + struct clock_event_device *clk) { - unsigned long ctrl; + timer_set_mode(ARCH_TIMER_VIRT_ACCESS, mode); +} - ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL); +static void arch_timer_set_mode_phys(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + timer_set_mode(ARCH_TIMER_PHYS_ACCESS, mode); +} + +static inline void set_next_event(const int access, unsigned long evt) +{ + unsigned long ctrl; + ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL); ctrl |= ARCH_TIMER_CTRL_ENABLE; ctrl &= ~ARCH_TIMER_CTRL_IT_MASK; + arch_timer_reg_write(access, ARCH_TIMER_REG_TVAL, evt); + arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl); +} - arch_timer_reg_write(ARCH_TIMER_REG_TVAL, evt); - arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl); +static int arch_timer_set_next_event_virt(unsigned long evt, + struct clock_event_device *unused) +{ + set_next_event(ARCH_TIMER_VIRT_ACCESS, evt); + return 0; +} +static int arch_timer_set_next_event_phys(unsigned long evt, + struct clock_event_device *unused) +{ + set_next_event(ARCH_TIMER_PHYS_ACCESS, evt); return 0; } static int __cpuinit arch_timer_setup(struct clock_event_device *clk) { - /* Be safe... */ - arch_timer_disable(); - clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP; clk->name = "arch_sys_timer"; clk->rating = 450; - clk->set_mode = arch_timer_set_mode; - clk->set_next_event = arch_timer_set_next_event; - clk->irq = arch_timer_ppi; + if (arch_timer_use_virtual) { + clk->irq = arch_timer_ppi[VIRT_PPI]; + clk->set_mode = arch_timer_set_mode_virt; + clk->set_next_event = arch_timer_set_next_event_virt; + } else { + clk->irq = arch_timer_ppi[PHYS_SECURE_PPI]; + clk->set_mode = arch_timer_set_mode_phys; + clk->set_next_event = arch_timer_set_next_event_phys; + } + + clk->set_mode(CLOCK_EVT_MODE_SHUTDOWN, NULL); clockevents_config_and_register(clk, arch_timer_rate, 0xf, 0x7fffffff); *__this_cpu_ptr(arch_timer_evt) = clk; - enable_percpu_irq(clk->irq, 0); - if (arch_timer_ppi2) - enable_percpu_irq(arch_timer_ppi2, 0); + if (arch_timer_use_virtual) + enable_percpu_irq(arch_timer_ppi[VIRT_PPI], 0); + else { + enable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], 0); + if (arch_timer_ppi[PHYS_NONSECURE_PPI]) + enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], 0); + } return 0; } @@ -173,8 +274,8 @@ static int arch_timer_available(void) return -ENXIO; if (arch_timer_rate == 0) { - arch_timer_reg_write(ARCH_TIMER_REG_CTRL, 0); - freq = arch_timer_reg_read(ARCH_TIMER_REG_FREQ); + freq = arch_timer_reg_read(ARCH_TIMER_PHYS_ACCESS, + ARCH_TIMER_REG_FREQ); /* Check the timer frequency. */ if (freq == 0) { @@ -185,52 +286,57 @@ static int arch_timer_available(void) arch_timer_rate = freq; } - pr_info_once("Architected local timer running at %lu.%02luMHz.\n", - arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100); + pr_info_once("Architected local timer running at %lu.%02luMHz (%s).\n", + arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100, + arch_timer_use_virtual ? "virt" : "phys"); return 0; } -static inline cycle_t arch_counter_get_cntpct(void) +static u32 notrace arch_counter_get_cntpct32(void) { - u32 cvall, cvalh; - - asm volatile("mrrc p15, 0, %0, %1, c14" : "=r" (cvall), "=r" (cvalh)); + cycle_t cnt = arch_counter_get_cntpct(); - return ((cycle_t) cvalh << 32) | cvall; -} - -static inline cycle_t arch_counter_get_cntvct(void) -{ - u32 cvall, cvalh; - - asm volatile("mrrc p15, 1, %0, %1, c14" : "=r" (cvall), "=r" (cvalh)); - - return ((cycle_t) cvalh << 32) | cvall; + /* + * The sched_clock infrastructure only knows about counters + * with at most 32bits. Forget about the upper 24 bits for the + * time being... + */ + return (u32)cnt; } static u32 notrace arch_counter_get_cntvct32(void) { - cycle_t cntvct = arch_counter_get_cntvct(); + cycle_t cnt = arch_counter_get_cntvct(); /* * The sched_clock infrastructure only knows about counters * with at most 32bits. Forget about the upper 24 bits for the * time being... */ - return (u32)(cntvct & (u32)~0); + return (u32)cnt; } static cycle_t arch_counter_read(struct clocksource *cs) { + /* + * Always use the physical counter for the clocksource. + * CNTHCTL.PL1PCTEN must be set to 1. + */ return arch_counter_get_cntpct(); } -int read_current_timer(unsigned long *timer_val) +static unsigned long arch_timer_read_current_timer(void) { - if (!arch_timer_rate) - return -ENXIO; - *timer_val = arch_counter_get_cntpct(); - return 0; + return arch_counter_get_cntpct(); +} + +static cycle_t arch_counter_read_cc(const struct cyclecounter *cc) +{ + /* + * Always use the physical counter for the clocksource. + * CNTHCTL.PL1PCTEN must be set to 1. + */ + return arch_counter_get_cntpct(); } static struct clocksource clocksource_counter = { @@ -241,14 +347,32 @@ static struct clocksource clocksource_counter = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static struct cyclecounter cyclecounter = { + .read = arch_counter_read_cc, + .mask = CLOCKSOURCE_MASK(56), +}; + +static struct timecounter timecounter; + +struct timecounter *arch_timer_get_timecounter(void) +{ + return &timecounter; +} + static void __cpuinit arch_timer_stop(struct clock_event_device *clk) { pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n", clk->irq, smp_processor_id()); - disable_percpu_irq(clk->irq); - if (arch_timer_ppi2) - disable_percpu_irq(arch_timer_ppi2); - arch_timer_set_mode(CLOCK_EVT_MODE_UNUSED, clk); + + if (arch_timer_use_virtual) + disable_percpu_irq(arch_timer_ppi[VIRT_PPI]); + else { + disable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI]); + if (arch_timer_ppi[PHYS_NONSECURE_PPI]) + disable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI]); + } + + clk->set_mode(CLOCK_EVT_MODE_UNUSED, clk); } static struct local_timer_ops arch_timer_ops __cpuinitdata = { @@ -261,36 +385,48 @@ static struct clock_event_device arch_timer_global_evt; static int __init arch_timer_register(void) { int err; + int ppi; err = arch_timer_available(); if (err) - return err; + goto out; arch_timer_evt = alloc_percpu(struct clock_event_device *); - if (!arch_timer_evt) - return -ENOMEM; + if (!arch_timer_evt) { + err = -ENOMEM; + goto out; + } clocksource_register_hz(&clocksource_counter, arch_timer_rate); + cyclecounter.mult = clocksource_counter.mult; + cyclecounter.shift = clocksource_counter.shift; + timecounter_init(&timecounter, &cyclecounter, + arch_counter_get_cntpct()); + + if (arch_timer_use_virtual) { + ppi = arch_timer_ppi[VIRT_PPI]; + err = request_percpu_irq(ppi, arch_timer_handler_virt, + "arch_timer", arch_timer_evt); + } else { + ppi = arch_timer_ppi[PHYS_SECURE_PPI]; + err = request_percpu_irq(ppi, arch_timer_handler_phys, + "arch_timer", arch_timer_evt); + if (!err && arch_timer_ppi[PHYS_NONSECURE_PPI]) { + ppi = arch_timer_ppi[PHYS_NONSECURE_PPI]; + err = request_percpu_irq(ppi, arch_timer_handler_phys, + "arch_timer", arch_timer_evt); + if (err) + free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], + arch_timer_evt); + } + } - err = request_percpu_irq(arch_timer_ppi, arch_timer_handler, - "arch_timer", arch_timer_evt); if (err) { pr_err("arch_timer: can't register interrupt %d (%d)\n", - arch_timer_ppi, err); + ppi, err); goto out_free; } - if (arch_timer_ppi2) { - err = request_percpu_irq(arch_timer_ppi2, arch_timer_handler, - "arch_timer", arch_timer_evt); - if (err) { - pr_err("arch_timer: can't register interrupt %d (%d)\n", - arch_timer_ppi2, err); - arch_timer_ppi2 = 0; - goto out_free_irq; - } - } - err = local_timer_register(&arch_timer_ops); if (err) { /* @@ -302,21 +438,29 @@ static int __init arch_timer_register(void) arch_timer_global_evt.cpumask = cpumask_of(0); err = arch_timer_setup(&arch_timer_global_evt); } - if (err) goto out_free_irq; - init_current_timer_delay(arch_timer_rate); + /* Use the architected timer for the delay loop. */ + arch_delay_timer.read_current_timer = &arch_timer_read_current_timer; + arch_delay_timer.freq = arch_timer_rate; + register_current_timer_delay(&arch_delay_timer); return 0; out_free_irq: - free_percpu_irq(arch_timer_ppi, arch_timer_evt); - if (arch_timer_ppi2) - free_percpu_irq(arch_timer_ppi2, arch_timer_evt); + if (arch_timer_use_virtual) + free_percpu_irq(arch_timer_ppi[VIRT_PPI], arch_timer_evt); + else { + free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], + arch_timer_evt); + if (arch_timer_ppi[PHYS_NONSECURE_PPI]) + free_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], + arch_timer_evt); + } out_free: free_percpu(arch_timer_evt); - +out: return err; } @@ -329,6 +473,7 @@ int __init arch_timer_of_register(void) { struct device_node *np; u32 freq; + int i; np = of_find_matching_node(NULL, arch_timer_of_match); if (!np) { @@ -340,22 +485,40 @@ int __init arch_timer_of_register(void) if (!of_property_read_u32(np, "clock-frequency", &freq)) arch_timer_rate = freq; - arch_timer_ppi = irq_of_parse_and_map(np, 0); - arch_timer_ppi2 = irq_of_parse_and_map(np, 1); - pr_info("arch_timer: found %s irqs %d %d\n", - np->name, arch_timer_ppi, arch_timer_ppi2); + for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) + arch_timer_ppi[i] = irq_of_parse_and_map(np, i); + + /* + * If no interrupt provided for virtual timer, we'll have to + * stick to the physical timer. It'd better be accessible... + */ + if (!arch_timer_ppi[VIRT_PPI]) { + arch_timer_use_virtual = false; + + if (!arch_timer_ppi[PHYS_SECURE_PPI] || + !arch_timer_ppi[PHYS_NONSECURE_PPI]) { + pr_warn("arch_timer: No interrupt available, giving up\n"); + return -EINVAL; + } + } return arch_timer_register(); } int __init arch_timer_sched_clock_init(void) { + u32 (*cnt32)(void); int err; err = arch_timer_available(); if (err) return err; - setup_sched_clock(arch_counter_get_cntvct32, 32, arch_timer_rate); + if (arch_timer_use_virtual) + cnt32 = arch_counter_get_cntvct32; + else + cnt32 = arch_counter_get_cntpct32; + + setup_sched_clock(cnt32, 32, arch_timer_rate); return 0; } diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 1429d8989fb90defcd8ba22fb18493a2206f658d..c985b481192c2643e938425a57e3e6fc9866ba90 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -59,10 +59,12 @@ int main(void) DEFINE(TI_USED_CP, offsetof(struct thread_info, used_cp)); DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value)); DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate)); +#ifdef CONFIG_VFP DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate)); #ifdef CONFIG_SMP DEFINE(VFP_CPU, offsetof(union vfp_state, hard.cpu)); #endif +#endif #ifdef CONFIG_ARM_THUMBEE DEFINE(TI_THUMBEE_STATE, offsetof(struct thread_info, thumbee_state)); #endif diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h index e5f028d214a11a2fbffd53161a98ebaf59d8740e..9edc9692332d1a368a293f38e0a9543c2102a751 100644 --- a/arch/arm/kernel/atags.h +++ b/arch/arm/kernel/atags.h @@ -3,3 +3,17 @@ extern void save_atags(struct tag *tags); #else static inline void save_atags(struct tag *tags) { } #endif + +void convert_to_tag_list(struct tag *tags); + +#ifdef CONFIG_ATAGS +struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr); +#else +static inline struct machine_desc * +setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr) +{ + early_print("no ATAGS support: can't continue\n"); + while (true); + unreachable(); +} +#endif diff --git a/arch/arm/kernel/compat.c b/arch/arm/kernel/atags_compat.c similarity index 99% rename from arch/arm/kernel/compat.c rename to arch/arm/kernel/atags_compat.c index 925652318b8b5df4cb7dce4383b99cee2640285b..5236ad38f417996e837ac45f4f9b4ae237c98c72 100644 --- a/arch/arm/kernel/compat.c +++ b/arch/arm/kernel/atags_compat.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/kernel/compat.c + * linux/arch/arm/kernel/atags_compat.c * * Copyright (C) 2001 Russell King * @@ -26,7 +26,7 @@ #include -#include "compat.h" +#include "atags.h" /* * Usage: diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c new file mode 100644 index 0000000000000000000000000000000000000000..14512e6931d87957b718445dd25b31283315a222 --- /dev/null +++ b/arch/arm/kernel/atags_parse.c @@ -0,0 +1,238 @@ +/* + * Tag parsing. + * + * Copyright (C) 1995-2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * This is the traditional way of passing data to the kernel at boot time. Rather + * than passing a fixed inflexible structure to the kernel, we pass a list + * of variable-sized tags to the kernel. The first tag must be a ATAG_CORE + * tag for the list to be recognised (to distinguish the tagged list from + * a param_struct). The list is terminated with a zero-length tag (this tag + * is not parsed in any way). + */ + +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "atags.h" + +static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; + +#ifndef MEM_SIZE +#define MEM_SIZE (16*1024*1024) +#endif + +static struct { + struct tag_header hdr1; + struct tag_core core; + struct tag_header hdr2; + struct tag_mem32 mem; + struct tag_header hdr3; +} default_tags __initdata = { + { tag_size(tag_core), ATAG_CORE }, + { 1, PAGE_SIZE, 0xff }, + { tag_size(tag_mem32), ATAG_MEM }, + { MEM_SIZE }, + { 0, ATAG_NONE } +}; + +static int __init parse_tag_core(const struct tag *tag) +{ + if (tag->hdr.size > 2) { + if ((tag->u.core.flags & 1) == 0) + root_mountflags &= ~MS_RDONLY; + ROOT_DEV = old_decode_dev(tag->u.core.rootdev); + } + return 0; +} + +__tagtable(ATAG_CORE, parse_tag_core); + +static int __init parse_tag_mem32(const struct tag *tag) +{ + return arm_add_memory(tag->u.mem.start, tag->u.mem.size); +} + +__tagtable(ATAG_MEM, parse_tag_mem32); + +#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) +static int __init parse_tag_videotext(const struct tag *tag) +{ + screen_info.orig_x = tag->u.videotext.x; + screen_info.orig_y = tag->u.videotext.y; + screen_info.orig_video_page = tag->u.videotext.video_page; + screen_info.orig_video_mode = tag->u.videotext.video_mode; + screen_info.orig_video_cols = tag->u.videotext.video_cols; + screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx; + screen_info.orig_video_lines = tag->u.videotext.video_lines; + screen_info.orig_video_isVGA = tag->u.videotext.video_isvga; + screen_info.orig_video_points = tag->u.videotext.video_points; + return 0; +} + +__tagtable(ATAG_VIDEOTEXT, parse_tag_videotext); +#endif + +#ifdef CONFIG_BLK_DEV_RAM +static int __init parse_tag_ramdisk(const struct tag *tag) +{ + extern int rd_size, rd_image_start, rd_prompt, rd_doload; + + rd_image_start = tag->u.ramdisk.start; + rd_doload = (tag->u.ramdisk.flags & 1) == 0; + rd_prompt = (tag->u.ramdisk.flags & 2) == 0; + + if (tag->u.ramdisk.size) + rd_size = tag->u.ramdisk.size; + + return 0; +} + +__tagtable(ATAG_RAMDISK, parse_tag_ramdisk); +#endif + +static int __init parse_tag_serialnr(const struct tag *tag) +{ + system_serial_low = tag->u.serialnr.low; + system_serial_high = tag->u.serialnr.high; + return 0; +} + +__tagtable(ATAG_SERIAL, parse_tag_serialnr); + +static int __init parse_tag_revision(const struct tag *tag) +{ + system_rev = tag->u.revision.rev; + return 0; +} + +__tagtable(ATAG_REVISION, parse_tag_revision); + +static int __init parse_tag_cmdline(const struct tag *tag) +{ +#if defined(CONFIG_CMDLINE_EXTEND) + strlcat(default_command_line, " ", COMMAND_LINE_SIZE); + strlcat(default_command_line, tag->u.cmdline.cmdline, + COMMAND_LINE_SIZE); +#elif defined(CONFIG_CMDLINE_FORCE) + pr_warning("Ignoring tag cmdline (using the default kernel command line)\n"); +#else + strlcpy(default_command_line, tag->u.cmdline.cmdline, + COMMAND_LINE_SIZE); +#endif + return 0; +} + +__tagtable(ATAG_CMDLINE, parse_tag_cmdline); + +/* + * Scan the tag table for this tag, and call its parse function. + * The tag table is built by the linker from all the __tagtable + * declarations. + */ +static int __init parse_tag(const struct tag *tag) +{ + extern struct tagtable __tagtable_begin, __tagtable_end; + struct tagtable *t; + + for (t = &__tagtable_begin; t < &__tagtable_end; t++) + if (tag->hdr.tag == t->tag) { + t->parse(tag); + break; + } + + return t < &__tagtable_end; +} + +/* + * Parse all tags in the list, checking both the global and architecture + * specific tag tables. + */ +static void __init parse_tags(const struct tag *t) +{ + for (; t->hdr.size; t = tag_next(t)) + if (!parse_tag(t)) + printk(KERN_WARNING + "Ignoring unrecognised tag 0x%08x\n", + t->hdr.tag); +} + +static void __init squash_mem_tags(struct tag *tag) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM) + tag->hdr.tag = ATAG_NONE; +} + +struct machine_desc * __init setup_machine_tags(phys_addr_t __atags_pointer, + unsigned int machine_nr) +{ + struct tag *tags = (struct tag *)&default_tags; + struct machine_desc *mdesc = NULL, *p; + char *from = default_command_line; + + default_tags.mem.start = PHYS_OFFSET; + + /* + * locate machine in the list of supported machines. + */ + for_each_machine_desc(p) + if (machine_nr == p->nr) { + printk("Machine: %s\n", p->name); + mdesc = p; + break; + } + + if (!mdesc) { + early_print("\nError: unrecognized/unsupported machine ID" + " (r1 = 0x%08x).\n\n", machine_nr); + dump_machine_table(); /* does not return */ + } + + if (__atags_pointer) + tags = phys_to_virt(__atags_pointer); + else if (mdesc->atag_offset) + tags = (void *)(PAGE_OFFSET + mdesc->atag_offset); + +#if defined(CONFIG_DEPRECATED_PARAM_STRUCT) + /* + * If we have the old style parameters, convert them to + * a tag list. + */ + if (tags->hdr.tag != ATAG_CORE) + convert_to_tag_list(tags); +#endif + if (tags->hdr.tag != ATAG_CORE) { + early_print("Warning: Neither atags nor dtb found\n"); + tags = (struct tag *)&default_tags; + } + + if (mdesc->fixup) + mdesc->fixup(tags, &from, &meminfo); + + if (tags->hdr.tag == ATAG_CORE) { + if (meminfo.nr_banks != 0) + squash_mem_tags(tags); + save_atags(tags); + parse_tags(tags); + } + + /* parse_early_param needs a boot_command_line */ + strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); + + return mdesc; +} diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags_proc.c similarity index 100% rename from arch/arm/kernel/atags.c rename to arch/arm/kernel/atags_proc.c diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index e337879595e565e5666cbd8ac0c40a4a72908c0e..831cd38c8d997b32f895fa077f3745c08879d99d 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -20,7 +20,7 @@ CALL(sys_creat) CALL(sys_link) /* 10 */ CALL(sys_unlink) - CALL(sys_execve_wrapper) + CALL(sys_execve) CALL(sys_chdir) CALL(OBSOLETE(sys_time)) /* used by libc4 */ CALL(sys_mknod) diff --git a/arch/arm/kernel/compat.h b/arch/arm/kernel/compat.h deleted file mode 100644 index 39264ab1b9c640cd81447f4a54ec1f19c118fede..0000000000000000000000000000000000000000 --- a/arch/arm/kernel/compat.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * linux/arch/arm/kernel/compat.h - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern void convert_to_tag_list(struct tag *tags); diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 978eac57e04a783f8901a16986f6d88f96f125ba..34711757ba59a958592d31ea527170c1356c282c 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -86,14 +86,26 @@ ENDPROC(ret_to_user) */ ENTRY(ret_from_fork) bl schedule_tail - get_thread_info tsk - mov why, #1 + cmp r5, #0 + movne r0, r4 + adrne lr, BSYM(1f) + movne pc, r5 +1: get_thread_info tsk b ret_slow_syscall ENDPROC(ret_from_fork) .equ NR_syscalls,0 #define CALL(x) .equ NR_syscalls,NR_syscalls+1 #include "calls.S" + +/* + * Ensure that the system call table is equal to __NR_syscalls, + * which is the value the rest of the system sees + */ +.ifne NR_syscalls - __NR_syscalls +.error "__NR_syscalls is not equal to the size of the syscall table" +.endif + #undef CALL #define CALL(x) .long x @@ -508,11 +520,6 @@ sys_vfork_wrapper: b sys_vfork ENDPROC(sys_vfork_wrapper) -sys_execve_wrapper: - add r3, sp, #S_OFF - b sys_execve -ENDPROC(sys_execve_wrapper) - sys_clone_wrapper: add ip, sp, #S_OFF str ip, [sp, #4] diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S index 9874d074119118f1d42abeee662beaa3433ca052..4eee351f4668e2bbee54c3771a5389ce8900c10c 100644 --- a/arch/arm/kernel/head.S +++ b/arch/arm/kernel/head.S @@ -83,8 +83,12 @@ ENTRY(stext) THUMB( .thumb ) @ switch to Thumb now. THUMB(1: ) - setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 @ ensure svc mode - @ and irqs disabled +#ifdef CONFIG_ARM_VIRT_EXT + bl __hyp_stub_install +#endif + @ ensure svc mode and all interrupts masked + safe_svcmode_maskall r9 + mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type @ r5=procinfo r9=cpuid movs r10, r5 @ invalid processor (r5=0)? @@ -326,7 +330,11 @@ ENTRY(secondary_startup) * the processor type - there is no need to check the machine type * as it has already been validated by the primary processor. */ - setmode PSR_F_BIT | PSR_I_BIT | SVC_MODE, r9 +#ifdef CONFIG_ARM_VIRT_EXT + bl __hyp_stub_install +#endif + safe_svcmode_maskall r9 + mrc p15, 0, r9, c0, c0 @ get processor id bl __lookup_processor_type movs r10, r5 @ invalid processor? diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S new file mode 100644 index 0000000000000000000000000000000000000000..65b2417aebce0beed61a7510702168cad2d9c3dc --- /dev/null +++ b/arch/arm/kernel/hyp-stub.S @@ -0,0 +1,223 @@ +/* + * Copyright (c) 2012 Linaro Limited. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include + +#ifndef ZIMAGE +/* + * For the kernel proper, we need to find out the CPU boot mode long after + * boot, so we need to store it in a writable variable. + * + * This is not in .bss, because we set it sufficiently early that the boot-time + * zeroing of .bss would clobber it. + */ +.data +ENTRY(__boot_cpu_mode) + .long 0 +.text + + /* + * Save the primary CPU boot mode. Requires 3 scratch registers. + */ + .macro store_primary_cpu_mode reg1, reg2, reg3 + mrs \reg1, cpsr + and \reg1, \reg1, #MODE_MASK + adr \reg2, .L__boot_cpu_mode_offset + ldr \reg3, [\reg2] + str \reg1, [\reg2, \reg3] + .endm + + /* + * Compare the current mode with the one saved on the primary CPU. + * If they don't match, record that fact. The Z bit indicates + * if there's a match or not. + * Requires 3 additionnal scratch registers. + */ + .macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3 + adr \reg2, .L__boot_cpu_mode_offset + ldr \reg3, [\reg2] + ldr \reg1, [\reg2, \reg3] + cmp \mode, \reg1 @ matches primary CPU boot mode? + orrne r7, r7, #BOOT_CPU_MODE_MISMATCH + strne r7, [r5, r6] @ record what happened and give up + .endm + +#else /* ZIMAGE */ + + .macro store_primary_cpu_mode reg1:req, reg2:req, reg3:req + .endm + +/* + * The zImage loader only runs on one CPU, so we don't bother with mult-CPU + * consistency checking: + */ + .macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3 + cmp \mode, \mode + .endm + +#endif /* ZIMAGE */ + +/* + * Hypervisor stub installation functions. + * + * These must be called with the MMU and D-cache off. + * They are not ABI compliant and are only intended to be called from the kernel + * entry points in head.S. + */ +@ Call this from the primary CPU +ENTRY(__hyp_stub_install) + store_primary_cpu_mode r4, r5, r6 +ENDPROC(__hyp_stub_install) + + @ fall through... + +@ Secondary CPUs should call here +ENTRY(__hyp_stub_install_secondary) + mrs r4, cpsr + and r4, r4, #MODE_MASK + + /* + * If the secondary has booted with a different mode, give up + * immediately. + */ + compare_cpu_mode_with_primary r4, r5, r6, r7 + bxne lr + + /* + * Once we have given up on one CPU, we do not try to install the + * stub hypervisor on the remaining ones: because the saved boot mode + * is modified, it can't compare equal to the CPSR mode field any + * more. + * + * Otherwise... + */ + + cmp r4, #HYP_MODE + bxne lr @ give up if the CPU is not in HYP mode + +/* + * Configure HSCTLR to set correct exception endianness/instruction set + * state etc. + * Turn off all traps + * Eventually, CPU-specific code might be needed -- assume not for now + * + * This code relies on the "eret" instruction to synchronize the + * various coprocessor accesses. + */ + @ Now install the hypervisor stub: + adr r7, __hyp_stub_vectors + mcr p15, 4, r7, c12, c0, 0 @ set hypervisor vector base (HVBAR) + + @ Disable all traps, so we don't get any nasty surprise + mov r7, #0 + mcr p15, 4, r7, c1, c1, 0 @ HCR + mcr p15, 4, r7, c1, c1, 2 @ HCPTR + mcr p15, 4, r7, c1, c1, 3 @ HSTR + +THUMB( orr r7, #(1 << 30) ) @ HSCTLR.TE +#ifdef CONFIG_CPU_BIG_ENDIAN + orr r7, #(1 << 9) @ HSCTLR.EE +#endif + mcr p15, 4, r7, c1, c0, 0 @ HSCTLR + + mrc p15, 4, r7, c1, c1, 1 @ HDCR + and r7, #0x1f @ Preserve HPMN + mcr p15, 4, r7, c1, c1, 1 @ HDCR + +#if !defined(ZIMAGE) && defined(CONFIG_ARM_ARCH_TIMER) + @ make CNTP_* and CNTPCT accessible from PL1 + mrc p15, 0, r7, c0, c1, 1 @ ID_PFR1 + lsr r7, #16 + and r7, #0xf + cmp r7, #1 + bne 1f + mrc p15, 4, r7, c14, c1, 0 @ CNTHCTL + orr r7, r7, #3 @ PL1PCEN | PL1PCTEN + mcr p15, 4, r7, c14, c1, 0 @ CNTHCTL +1: +#endif + + bic r7, r4, #MODE_MASK + orr r7, r7, #SVC_MODE +THUMB( orr r7, r7, #PSR_T_BIT ) + msr spsr_cxsf, r7 @ This is SPSR_hyp. + + __MSR_ELR_HYP(14) @ msr elr_hyp, lr + __ERET @ return, switching to SVC mode + @ The boot CPU mode is left in r4. +ENDPROC(__hyp_stub_install_secondary) + +__hyp_stub_do_trap: + cmp r0, #-1 + mrceq p15, 4, r0, c12, c0, 0 @ get HVBAR + mcrne p15, 4, r0, c12, c0, 0 @ set HVBAR + __ERET +ENDPROC(__hyp_stub_do_trap) + +/* + * __hyp_set_vectors: Call this after boot to set the initial hypervisor + * vectors as part of hypervisor installation. On an SMP system, this should + * be called on each CPU. + * + * r0 must be the physical address of the new vector table (which must lie in + * the bottom 4GB of physical address space. + * + * r0 must be 32-byte aligned. + * + * Before calling this, you must check that the stub hypervisor is installed + * everywhere, by waiting for any secondary CPUs to be brought up and then + * checking that BOOT_CPU_MODE_HAVE_HYP(__boot_cpu_mode) is true. + * + * If not, there is a pre-existing hypervisor, some CPUs failed to boot, or + * something else went wrong... in such cases, trying to install a new + * hypervisor is unlikely to work as desired. + * + * When you call into your shiny new hypervisor, sp_hyp will contain junk, + * so you will need to set that to something sensible at the new hypervisor's + * initialisation entry point. + */ +ENTRY(__hyp_get_vectors) + mov r0, #-1 +ENDPROC(__hyp_get_vectors) + @ fall through +ENTRY(__hyp_set_vectors) + __HVC(0) + bx lr +ENDPROC(__hyp_set_vectors) + +#ifndef ZIMAGE +.align 2 +.L__boot_cpu_mode_offset: + .long __boot_cpu_mode - . +#endif + +.align 5 +__hyp_stub_vectors: +__hyp_stub_reset: W(b) . +__hyp_stub_und: W(b) . +__hyp_stub_svc: W(b) . +__hyp_stub_pabort: W(b) . +__hyp_stub_dabort: W(b) . +__hyp_stub_trap: W(b) __hyp_stub_do_trap +__hyp_stub_irq: W(b) . +__hyp_stub_fiq: W(b) . +ENDPROC(__hyp_stub_vectors) + diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index dfcdb9f7c1261143f93c31846ed372269a4b4783..e29c3337ca8142aeb6f4bb755e3947d6aecd4fbe 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -8,7 +8,9 @@ #include #include #include +#include #include +#include #include #include #include @@ -32,6 +34,29 @@ static atomic_t waiting_for_crash_ipi; int machine_kexec_prepare(struct kimage *image) { + struct kexec_segment *current_segment; + __be32 header; + int i, err; + + /* + * No segment at default ATAGs address. try to locate + * a dtb using magic. + */ + for (i = 0; i < image->nr_segments; i++) { + current_segment = &image->segment[i]; + + err = memblock_is_region_memory(current_segment->mem, + current_segment->memsz); + if (err) + return - EINVAL; + + err = get_user(header, (__be32*)current_segment->buf); + if (err) + return err; + + if (be32_to_cpu(header) == OF_DT_HEADER) + kexec_boot_atags = current_segment->mem; + } return 0; } @@ -122,7 +147,9 @@ void machine_kexec(struct kimage *image) kexec_start_address = image->start; kexec_indirection_page = page_list; kexec_mach_type = machine_arch_type; - kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; + if (!kexec_boot_atags) + kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; + /* copy our kernel relocation code to the control code page */ memcpy(reboot_code_buffer, diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c index 04eea22d7958637f17456c7e2f37ac7b71e8e182..90084a6de35a75ede68e451a4f521e3a4174fc92 100644 --- a/arch/arm/kernel/process.c +++ b/arch/arm/kernel/process.c @@ -381,13 +381,20 @@ copy_thread(unsigned long clone_flags, unsigned long stack_start, struct thread_info *thread = task_thread_info(p); struct pt_regs *childregs = task_pt_regs(p); - *childregs = *regs; - childregs->ARM_r0 = 0; - childregs->ARM_sp = stack_start; - memset(&thread->cpu_context, 0, sizeof(struct cpu_context_save)); - thread->cpu_context.sp = (unsigned long)childregs; + + if (likely(regs)) { + *childregs = *regs; + childregs->ARM_r0 = 0; + childregs->ARM_sp = stack_start; + } else { + memset(childregs, 0, sizeof(struct pt_regs)); + thread->cpu_context.r4 = stk_sz; + thread->cpu_context.r5 = stack_start; + childregs->ARM_cpsr = SVC_MODE; + } thread->cpu_context.pc = (unsigned long)ret_from_fork; + thread->cpu_context.sp = (unsigned long)childregs; clear_ptrace_hw_breakpoint(p); @@ -423,63 +430,6 @@ int dump_fpu (struct pt_regs *regs, struct user_fp *fp) } EXPORT_SYMBOL(dump_fpu); -/* - * Shuffle the argument into the correct register before calling the - * thread function. r4 is the thread argument, r5 is the pointer to - * the thread function, and r6 points to the exit function. - */ -extern void kernel_thread_helper(void); -asm( ".pushsection .text\n" -" .align\n" -" .type kernel_thread_helper, #function\n" -"kernel_thread_helper:\n" -#ifdef CONFIG_TRACE_IRQFLAGS -" bl trace_hardirqs_on\n" -#endif -" msr cpsr_c, r7\n" -" mov r0, r4\n" -" mov lr, r6\n" -" mov pc, r5\n" -" .size kernel_thread_helper, . - kernel_thread_helper\n" -" .popsection"); - -#ifdef CONFIG_ARM_UNWIND -extern void kernel_thread_exit(long code); -asm( ".pushsection .text\n" -" .align\n" -" .type kernel_thread_exit, #function\n" -"kernel_thread_exit:\n" -" .fnstart\n" -" .cantunwind\n" -" bl do_exit\n" -" nop\n" -" .fnend\n" -" .size kernel_thread_exit, . - kernel_thread_exit\n" -" .popsection"); -#else -#define kernel_thread_exit do_exit -#endif - -/* - * Create a kernel thread. - */ -pid_t kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) -{ - struct pt_regs regs; - - memset(®s, 0, sizeof(regs)); - - regs.ARM_r4 = (unsigned long)arg; - regs.ARM_r5 = (unsigned long)fn; - regs.ARM_r6 = (unsigned long)kernel_thread_exit; - regs.ARM_r7 = SVC_MODE | PSR_ENDSTATE | PSR_ISETSTATE; - regs.ARM_pc = (unsigned long)kernel_thread_helper; - regs.ARM_cpsr = regs.ARM_r7 | PSR_I_BIT; - - return do_fork(flags|CLONE_VM|CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); -} -EXPORT_SYMBOL(kernel_thread); - unsigned long get_wchan(struct task_struct *p) { struct stackframe frame; diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 3e0fc5f7ed4b05cb09df7c58f7098492176a568b..739db3a1b2d279216336025d88586d3ffd07a0e0 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -30,6 +30,9 @@ #include #include +#define CREATE_TRACE_POINTS +#include + #define REG_PC 15 #define REG_PSR 16 /* @@ -918,11 +921,11 @@ static int ptrace_syscall_trace(struct pt_regs *regs, int scno, { unsigned long ip; + current_thread_info()->syscall = scno; + if (!test_thread_flag(TIF_SYSCALL_TRACE)) return scno; - current_thread_info()->syscall = scno; - /* * IP is used to denote syscall entry/exit: * IP = 0 -> entry, =1 -> exit @@ -941,15 +944,19 @@ static int ptrace_syscall_trace(struct pt_regs *regs, int scno, asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) { - int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER); + scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER); + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) + trace_sys_enter(regs, scno); audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); - return ret; + return scno; } asmlinkage int syscall_trace_exit(struct pt_regs *regs, int scno) { - int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT); + scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT); + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) + trace_sys_exit(regs, scno); audit_syscall_exit(regs); - return ret; + return scno; } diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index f4515393248dab76b97700f55ef17bba68e6cd0a..e21bac20d90da1558000125586623bdb9cbe328c 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -9,6 +9,7 @@ #include #include #include +#include #include #include #include @@ -27,6 +28,9 @@ struct clock_data { static void sched_clock_poll(unsigned long wrap_ticks); static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0); +static int irqtime = -1; + +core_param(irqtime, irqtime, int, 0400); static struct clock_data cd = { .mult = NSEC_PER_SEC / HZ, @@ -157,6 +161,10 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) */ cd.epoch_ns = 0; + /* Enable IRQ time accounting if we have a fast enough sched_clock */ + if (irqtime > 0 || (irqtime == -1 && rate >= 1000000)) + enable_sched_clock_irqtime(); + pr_debug("Registered %pF as sched_clock source\n", read); } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 725f9f2a95414e10d8f73a0360741031dd16db48..da1d1aa20ad957ccd7021815014d12530de4f3a1 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -21,11 +21,9 @@ #include #include #include -#include #include #include #include -#include #include #include #include @@ -55,16 +53,11 @@ #include #include #include +#include -#if defined(CONFIG_DEPRECATED_PARAM_STRUCT) -#include "compat.h" -#endif #include "atags.h" #include "tcm.h" -#ifndef MEM_SIZE -#define MEM_SIZE (16*1024*1024) -#endif #if defined(CONFIG_FPE_NWFPE) || defined(CONFIG_FPE_FASTFPE) char fpe_type[8]; @@ -145,7 +138,6 @@ static const char *machine_name; static char __initdata cmd_line[COMMAND_LINE_SIZE]; struct machine_desc *machine_desc __initdata; -static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } }; #define ENDIANNESS ((char)endian_test.l) @@ -583,21 +575,6 @@ static int __init early_mem(char *p) } early_param("mem", early_mem); -static void __init -setup_ramdisk(int doload, int prompt, int image_start, unsigned int rd_sz) -{ -#ifdef CONFIG_BLK_DEV_RAM - extern int rd_size, rd_image_start, rd_prompt, rd_doload; - - rd_image_start = image_start; - rd_prompt = prompt; - rd_doload = doload; - - if (rd_sz) - rd_size = rd_sz; -#endif -} - static void __init request_standard_resources(struct machine_desc *mdesc) { struct memblock_region *region; @@ -643,35 +620,6 @@ static void __init request_standard_resources(struct machine_desc *mdesc) request_resource(&ioport_resource, &lp2); } -/* - * Tag parsing. - * - * This is the new way of passing data to the kernel at boot time. Rather - * than passing a fixed inflexible structure to the kernel, we pass a list - * of variable-sized tags to the kernel. The first tag must be a ATAG_CORE - * tag for the list to be recognised (to distinguish the tagged list from - * a param_struct). The list is terminated with a zero-length tag (this tag - * is not parsed in any way). - */ -static int __init parse_tag_core(const struct tag *tag) -{ - if (tag->hdr.size > 2) { - if ((tag->u.core.flags & 1) == 0) - root_mountflags &= ~MS_RDONLY; - ROOT_DEV = old_decode_dev(tag->u.core.rootdev); - } - return 0; -} - -__tagtable(ATAG_CORE, parse_tag_core); - -static int __init parse_tag_mem32(const struct tag *tag) -{ - return arm_add_memory(tag->u.mem.start, tag->u.mem.size); -} - -__tagtable(ATAG_MEM, parse_tag_mem32); - #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) struct screen_info screen_info = { .orig_video_lines = 30, @@ -681,117 +629,8 @@ struct screen_info screen_info = { .orig_video_isVGA = 1, .orig_video_points = 8 }; - -static int __init parse_tag_videotext(const struct tag *tag) -{ - screen_info.orig_x = tag->u.videotext.x; - screen_info.orig_y = tag->u.videotext.y; - screen_info.orig_video_page = tag->u.videotext.video_page; - screen_info.orig_video_mode = tag->u.videotext.video_mode; - screen_info.orig_video_cols = tag->u.videotext.video_cols; - screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx; - screen_info.orig_video_lines = tag->u.videotext.video_lines; - screen_info.orig_video_isVGA = tag->u.videotext.video_isvga; - screen_info.orig_video_points = tag->u.videotext.video_points; - return 0; -} - -__tagtable(ATAG_VIDEOTEXT, parse_tag_videotext); #endif -static int __init parse_tag_ramdisk(const struct tag *tag) -{ - setup_ramdisk((tag->u.ramdisk.flags & 1) == 0, - (tag->u.ramdisk.flags & 2) == 0, - tag->u.ramdisk.start, tag->u.ramdisk.size); - return 0; -} - -__tagtable(ATAG_RAMDISK, parse_tag_ramdisk); - -static int __init parse_tag_serialnr(const struct tag *tag) -{ - system_serial_low = tag->u.serialnr.low; - system_serial_high = tag->u.serialnr.high; - return 0; -} - -__tagtable(ATAG_SERIAL, parse_tag_serialnr); - -static int __init parse_tag_revision(const struct tag *tag) -{ - system_rev = tag->u.revision.rev; - return 0; -} - -__tagtable(ATAG_REVISION, parse_tag_revision); - -static int __init parse_tag_cmdline(const struct tag *tag) -{ -#if defined(CONFIG_CMDLINE_EXTEND) - strlcat(default_command_line, " ", COMMAND_LINE_SIZE); - strlcat(default_command_line, tag->u.cmdline.cmdline, - COMMAND_LINE_SIZE); -#elif defined(CONFIG_CMDLINE_FORCE) - pr_warning("Ignoring tag cmdline (using the default kernel command line)\n"); -#else - strlcpy(default_command_line, tag->u.cmdline.cmdline, - COMMAND_LINE_SIZE); -#endif - return 0; -} - -__tagtable(ATAG_CMDLINE, parse_tag_cmdline); - -/* - * Scan the tag table for this tag, and call its parse function. - * The tag table is built by the linker from all the __tagtable - * declarations. - */ -static int __init parse_tag(const struct tag *tag) -{ - extern struct tagtable __tagtable_begin, __tagtable_end; - struct tagtable *t; - - for (t = &__tagtable_begin; t < &__tagtable_end; t++) - if (tag->hdr.tag == t->tag) { - t->parse(tag); - break; - } - - return t < &__tagtable_end; -} - -/* - * Parse all tags in the list, checking both the global and architecture - * specific tag tables. - */ -static void __init parse_tags(const struct tag *t) -{ - for (; t->hdr.size; t = tag_next(t)) - if (!parse_tag(t)) - printk(KERN_WARNING - "Ignoring unrecognised tag 0x%08x\n", - t->hdr.tag); -} - -/* - * This holds our defaults. - */ -static struct init_tags { - struct tag_header hdr1; - struct tag_core core; - struct tag_header hdr2; - struct tag_mem32 mem; - struct tag_header hdr3; -} init_tags __initdata = { - { tag_size(tag_core), ATAG_CORE }, - { 1, PAGE_SIZE, 0xff }, - { tag_size(tag_mem32), ATAG_MEM }, - { MEM_SIZE }, - { 0, ATAG_NONE } -}; - static int __init customize_machine(void) { /* customizes platform devices, or adds new ones */ @@ -858,78 +697,6 @@ static void __init reserve_crashkernel(void) static inline void reserve_crashkernel(void) {} #endif /* CONFIG_KEXEC */ -static void __init squash_mem_tags(struct tag *tag) -{ - for (; tag->hdr.size; tag = tag_next(tag)) - if (tag->hdr.tag == ATAG_MEM) - tag->hdr.tag = ATAG_NONE; -} - -static struct machine_desc * __init setup_machine_tags(unsigned int nr) -{ - struct tag *tags = (struct tag *)&init_tags; - struct machine_desc *mdesc = NULL, *p; - char *from = default_command_line; - - init_tags.mem.start = PHYS_OFFSET; - - /* - * locate machine in the list of supported machines. - */ - for_each_machine_desc(p) - if (nr == p->nr) { - printk("Machine: %s\n", p->name); - mdesc = p; - break; - } - - if (!mdesc) { - early_print("\nError: unrecognized/unsupported machine ID" - " (r1 = 0x%08x).\n\n", nr); - dump_machine_table(); /* does not return */ - } - - if (__atags_pointer) - tags = phys_to_virt(__atags_pointer); - else if (mdesc->atag_offset) - tags = (void *)(PAGE_OFFSET + mdesc->atag_offset); - -#if defined(CONFIG_DEPRECATED_PARAM_STRUCT) - /* - * If we have the old style parameters, convert them to - * a tag list. - */ - if (tags->hdr.tag != ATAG_CORE) - convert_to_tag_list(tags); -#endif - - if (tags->hdr.tag != ATAG_CORE) { -#if defined(CONFIG_OF) - /* - * If CONFIG_OF is set, then assume this is a reasonably - * modern system that should pass boot parameters - */ - early_print("Warning: Neither atags nor dtb found\n"); -#endif - tags = (struct tag *)&init_tags; - } - - if (mdesc->fixup) - mdesc->fixup(tags, &from, &meminfo); - - if (tags->hdr.tag == ATAG_CORE) { - if (meminfo.nr_banks != 0) - squash_mem_tags(tags); - save_atags(tags); - parse_tags(tags); - } - - /* parse_early_param needs a boot_command_line */ - strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); - - return mdesc; -} - static int __init meminfo_cmp(const void *_a, const void *_b) { const struct membank *a = _a, *b = _b; @@ -937,6 +704,21 @@ static int __init meminfo_cmp(const void *_a, const void *_b) return cmp < 0 ? -1 : cmp > 0 ? 1 : 0; } +void __init hyp_mode_check(void) +{ +#ifdef CONFIG_ARM_VIRT_EXT + if (is_hyp_mode_available()) { + pr_info("CPU: All CPU(s) started in HYP mode.\n"); + pr_info("CPU: Virtualization extensions available.\n"); + } else if (is_hyp_mode_mismatched()) { + pr_warn("CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x%x)\n", + __boot_cpu_mode & MODE_MASK); + pr_warn("CPU: This may indicate a broken bootloader or firmware.\n"); + } else + pr_info("CPU: All CPU(s) started in SVC mode.\n"); +#endif +} + void __init setup_arch(char **cmdline_p) { struct machine_desc *mdesc; @@ -944,7 +726,7 @@ void __init setup_arch(char **cmdline_p) setup_processor(); mdesc = setup_machine_fdt(__atags_pointer); if (!mdesc) - mdesc = setup_machine_tags(machine_arch_type); + mdesc = setup_machine_tags(__atags_pointer, machine_arch_type); machine_desc = mdesc; machine_name = mdesc->name; @@ -982,6 +764,10 @@ void __init setup_arch(char **cmdline_p) smp_init_cpus(); } #endif + + if (!is_smp()) + hyp_mode_check(); + reserve_crashkernel(); tcm_init(); diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c index f27789e4e38aaad749e05426d042cffe7912b5c7..56f72d257ebdfcdfd8607fcc770eeecc61c24806 100644 --- a/arch/arm/kernel/signal.c +++ b/arch/arm/kernel/signal.c @@ -10,7 +10,6 @@ #include #include #include -#include #include #include diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index aa4ffe6e5ecfbd9a8feeedf1c002ca50861ae541..8e20754dd31d5946f5297aae2023ae2c8d5cd572 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -42,6 +43,7 @@ #include #include #include +#include #include /* @@ -58,7 +60,8 @@ struct secondary_data secondary_data; volatile int __cpuinitdata pen_release = -1; enum ipi_msg_type { - IPI_TIMER = 2, + IPI_WAKEUP, + IPI_TIMER, IPI_RESCHEDULE, IPI_CALL_FUNC, IPI_CALL_FUNC_SINGLE, @@ -200,8 +203,11 @@ int __cpuinit __cpu_disable(void) /* * Flush user cache and TLB mappings, and then remove this CPU * from the vm mask set of all processes. + * + * Caches are flushed to the Level of Unification Inner Shareable + * to write-back dirty lines to unified caches shared by all CPUs. */ - flush_cache_all(); + flush_cache_louis(); local_flush_tlb_all(); clear_tasks_mm_cpumask(cpu); @@ -353,6 +359,8 @@ void __init smp_cpus_done(unsigned int max_cpus) num_online_cpus(), bogosum / (500000/HZ), (bogosum / (5000/HZ)) % 100); + + hyp_mode_check(); } void __init smp_prepare_boot_cpu(void) @@ -413,7 +421,8 @@ void arch_send_call_function_single_ipi(int cpu) } static const char *ipi_types[NR_IPI] = { -#define S(x,s) [x - IPI_TIMER] = s +#define S(x,s) [x] = s + S(IPI_WAKEUP, "CPU wakeup interrupts"), S(IPI_TIMER, "Timer broadcast interrupts"), S(IPI_RESCHEDULE, "Rescheduling interrupts"), S(IPI_CALL_FUNC, "Function call interrupts"), @@ -566,10 +575,13 @@ void handle_IPI(int ipinr, struct pt_regs *regs) unsigned int cpu = smp_processor_id(); struct pt_regs *old_regs = set_irq_regs(regs); - if (ipinr >= IPI_TIMER && ipinr < IPI_TIMER + NR_IPI) - __inc_irq_stat(cpu, ipi_irqs[ipinr - IPI_TIMER]); + if (ipinr < NR_IPI) + __inc_irq_stat(cpu, ipi_irqs[ipinr]); switch (ipinr) { + case IPI_WAKEUP: + break; + case IPI_TIMER: irq_enter(); ipi_timer(); @@ -650,3 +662,56 @@ int setup_profiling_timer(unsigned int multiplier) { return -EINVAL; } + +#ifdef CONFIG_CPU_FREQ + +static DEFINE_PER_CPU(unsigned long, l_p_j_ref); +static DEFINE_PER_CPU(unsigned long, l_p_j_ref_freq); +static unsigned long global_l_p_j_ref; +static unsigned long global_l_p_j_ref_freq; + +static int cpufreq_callback(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct cpufreq_freqs *freq = data; + int cpu = freq->cpu; + + if (freq->flags & CPUFREQ_CONST_LOOPS) + return NOTIFY_OK; + + if (!per_cpu(l_p_j_ref, cpu)) { + per_cpu(l_p_j_ref, cpu) = + per_cpu(cpu_data, cpu).loops_per_jiffy; + per_cpu(l_p_j_ref_freq, cpu) = freq->old; + if (!global_l_p_j_ref) { + global_l_p_j_ref = loops_per_jiffy; + global_l_p_j_ref_freq = freq->old; + } + } + + if ((val == CPUFREQ_PRECHANGE && freq->old < freq->new) || + (val == CPUFREQ_POSTCHANGE && freq->old > freq->new) || + (val == CPUFREQ_RESUMECHANGE || val == CPUFREQ_SUSPENDCHANGE)) { + loops_per_jiffy = cpufreq_scale(global_l_p_j_ref, + global_l_p_j_ref_freq, + freq->new); + per_cpu(cpu_data, cpu).loops_per_jiffy = + cpufreq_scale(per_cpu(l_p_j_ref, cpu), + per_cpu(l_p_j_ref_freq, cpu), + freq->new); + } + return NOTIFY_OK; +} + +static struct notifier_block cpufreq_notifier = { + .notifier_call = cpufreq_callback, +}; + +static int __init register_cpufreq_notifier(void) +{ + return cpufreq_register_notifier(&cpufreq_notifier, + CPUFREQ_TRANSITION_NOTIFIER); +} +core_initcall(register_cpufreq_notifier); + +#endif diff --git a/arch/arm/kernel/suspend.c b/arch/arm/kernel/suspend.c index 1794cc3b0f1836583fec297ee484c554fdefffcd..358bca3a995ed37ec66da93ec40841abd99fa804 100644 --- a/arch/arm/kernel/suspend.c +++ b/arch/arm/kernel/suspend.c @@ -17,6 +17,8 @@ extern void cpu_resume_mmu(void); */ void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr) { + u32 *ctx = ptr; + *save_ptr = virt_to_phys(ptr); /* This must correspond to the LDM in cpu_resume() assembly */ @@ -26,7 +28,20 @@ void __cpu_suspend_save(u32 *ptr, u32 ptrsz, u32 sp, u32 *save_ptr) cpu_do_suspend(ptr); - flush_cache_all(); + flush_cache_louis(); + + /* + * flush_cache_louis does not guarantee that + * save_ptr and ptr are cleaned to main memory, + * just up to the Level of Unification Inner Shareable. + * Since the context pointer and context itself + * are to be retrieved with the MMU off that + * data must be cleaned from all cache levels + * to main memory using "area" cache primitives. + */ + __cpuc_flush_dcache_area(ctx, ptrsz); + __cpuc_flush_dcache_area(save_ptr, sizeof(*save_ptr)); + outer_clean_range(*save_ptr, *save_ptr + ptrsz); outer_clean_range(virt_to_phys(save_ptr), virt_to_phys(save_ptr) + sizeof(*save_ptr)); diff --git a/arch/arm/kernel/sys_arm.c b/arch/arm/kernel/sys_arm.c index 76cbb055dd05ee2e8620bc1a3f1dc322f1333aeb..c2a898aa57aada4b16cff08ea6da84d797f88ab9 100644 --- a/arch/arm/kernel/sys_arm.c +++ b/arch/arm/kernel/sys_arm.c @@ -59,69 +59,6 @@ asmlinkage int sys_vfork(struct pt_regs *regs) return do_fork(CLONE_VFORK | CLONE_VM | SIGCHLD, regs->ARM_sp, regs, 0, NULL, NULL); } -/* sys_execve() executes a new program. - * This is called indirectly via a small wrapper - */ -asmlinkage int sys_execve(const char __user *filenamei, - const char __user *const __user *argv, - const char __user *const __user *envp, struct pt_regs *regs) -{ - int error; - char * filename; - - filename = getname(filenamei); - error = PTR_ERR(filename); - if (IS_ERR(filename)) - goto out; - error = do_execve(filename, argv, envp, regs); - putname(filename); -out: - return error; -} - -int kernel_execve(const char *filename, - const char *const argv[], - const char *const envp[]) -{ - struct pt_regs regs; - int ret; - - memset(®s, 0, sizeof(struct pt_regs)); - ret = do_execve(filename, - (const char __user *const __user *)argv, - (const char __user *const __user *)envp, ®s); - if (ret < 0) - goto out; - - /* - * Save argc to the register structure for userspace. - */ - regs.ARM_r0 = ret; - - /* - * We were successful. We won't be returning to our caller, but - * instead to user space by manipulating the kernel stack. - */ - asm( "add r0, %0, %1\n\t" - "mov r1, %2\n\t" - "mov r2, %3\n\t" - "bl memmove\n\t" /* copy regs to top of stack */ - "mov r8, #0\n\t" /* not a syscall */ - "mov r9, %0\n\t" /* thread structure */ - "mov sp, r0\n\t" /* reposition stack pointer */ - "b ret_to_user" - : - : "r" (current_thread_info()), - "Ir" (THREAD_START_SP - sizeof(regs)), - "r" (®s), - "Ir" (sizeof(regs)) - : "r0", "r1", "r2", "r3", "r8", "r9", "ip", "lr", "memory"); - - out: - return ret; -} -EXPORT_SYMBOL(kernel_execve); - /* * Since loff_t is a 64 bit type we avoid a lot of ABI hassle * with a different argument ordering. diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 395d5fbb8fa20c01c8b71d37dce42df700820c91..9d0a30032d7f0f2ae50f0cbe9eebb80d6da827a3 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -34,7 +34,18 @@ struct arm_delay_ops arm_delay_ops = { .udelay = __loop_udelay, }; -#ifdef ARCH_HAS_READ_CURRENT_TIMER +static const struct delay_timer *delay_timer; +static bool delay_calibrated; + +int read_current_timer(unsigned long *timer_val) +{ + if (!delay_timer) + return -ENXIO; + + *timer_val = delay_timer->read_current_timer(); + return 0; +} + static void __timer_delay(unsigned long cycles) { cycles_t start = get_cycles(); @@ -55,18 +66,24 @@ static void __timer_udelay(unsigned long usecs) __timer_const_udelay(usecs * UDELAY_MULT); } -void __init init_current_timer_delay(unsigned long freq) +void __init register_current_timer_delay(const struct delay_timer *timer) { - pr_info("Switching to timer-based delay loop\n"); - lpj_fine = freq / HZ; - loops_per_jiffy = lpj_fine; - arm_delay_ops.delay = __timer_delay; - arm_delay_ops.const_udelay = __timer_const_udelay; - arm_delay_ops.udelay = __timer_udelay; + if (!delay_calibrated) { + pr_info("Switching to timer-based delay loop\n"); + delay_timer = timer; + lpj_fine = timer->freq / HZ; + loops_per_jiffy = lpj_fine; + arm_delay_ops.delay = __timer_delay; + arm_delay_ops.const_udelay = __timer_const_udelay; + arm_delay_ops.udelay = __timer_udelay; + delay_calibrated = true; + } else { + pr_info("Ignoring duplicate/late registration of read_current_timer delay\n"); + } } unsigned long __cpuinit calibrate_delay_is_known(void) { + delay_calibrated = true; return lpj_fine; } -#endif diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig index c8050b14e615ef0df3adbee08598b7aaf30a60ff..b14207101938adb03c852a708a2261e4a58d6f3d 100644 --- a/arch/arm/mach-at91/Kconfig +++ b/arch/arm/mach-at91/Kconfig @@ -19,8 +19,8 @@ config AT91_SAM9G45_RESET config SOC_AT91SAM9 bool - select GENERIC_CLOCKEVENTS select CPU_ARM926T + select GENERIC_CLOCKEVENTS menu "Atmel AT91 System-on-Chip" @@ -28,66 +28,66 @@ comment "Atmel AT91 Processor" config SOC_AT91SAM9 bool + select AT91_SAM9_SMC + select AT91_SAM9_TIME select CPU_ARM926T select MULTI_IRQ_HANDLER select SPARSE_IRQ - select AT91_SAM9_TIME - select AT91_SAM9_SMC config SOC_AT91RM9200 bool "AT91RM9200" select CPU_ARM920T - select MULTI_IRQ_HANDLER - select SPARSE_IRQ select GENERIC_CLOCKEVENTS select HAVE_AT91_DBGU0 + select MULTI_IRQ_HANDLER + select SPARSE_IRQ config SOC_AT91SAM9260 bool "AT91SAM9260, AT91SAM9XE or AT91SAM9G20" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_NET_MACB + select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9260, AT91SAM9XE or AT91SAM9G20 SoC. config SOC_AT91SAM9261 bool "AT91SAM9261 or AT91SAM9G10" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9261 or AT91SAM9G10 SoC. config SOC_AT91SAM9263 bool "AT91SAM9263" - select SOC_AT91SAM9 select HAVE_AT91_DBGU1 select HAVE_FB_ATMEL select HAVE_NET_MACB + select SOC_AT91SAM9 config SOC_AT91SAM9RL bool "AT91SAM9RL" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + select SOC_AT91SAM9 config SOC_AT91SAM9G45 bool "AT91SAM9G45 or AT91SAM9M10 families" - select SOC_AT91SAM9 select HAVE_AT91_DBGU1 select HAVE_FB_ATMEL select HAVE_NET_MACB + select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9G45 family SoC. This support covers AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11. config SOC_AT91SAM9X5 bool "AT91SAM9x5 family" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL select HAVE_NET_MACB + select SOC_AT91SAM9 help Select this if you are using one of Atmel's AT91SAM9x5 family SoC. This means that your SAM9 name finishes with a '5' (except if it is @@ -97,9 +97,9 @@ config SOC_AT91SAM9X5 config SOC_AT91SAM9N12 bool "AT91SAM9N12 family" - select SOC_AT91SAM9 select HAVE_AT91_DBGU0 select HAVE_FB_ATMEL + select SOC_AT91SAM9 help Select this if you are using Atmel's AT91SAM9N12 SoC. @@ -144,9 +144,9 @@ config ARCH_AT91SAM9G45 config ARCH_AT91X40 bool "AT91x40" depends on !MMU + select ARCH_USES_GETTIMEOFFSET select MULTI_IRQ_HANDLER select SPARSE_IRQ - select ARCH_USES_GETTIMEOFFSET endchoice diff --git a/arch/arm/mach-at91/at91rm9200.c b/arch/arm/mach-at91/at91rm9200.c index 6f50c6722276dcc73f8607b51132bfe40dd077b9..b4f0565aff638af135c7797b430bbfeb2a29b439 100644 --- a/arch/arm/mach-at91/at91rm9200.c +++ b/arch/arm/mach-at91/at91rm9200.c @@ -187,6 +187,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91rm9200_devices.c b/arch/arm/mach-at91/at91rm9200_devices.c index 9ac427a702da3d5cc25f380ededa12dcbcd73ed9..a563189cdfc3e1bfd4bdc2e71049073de01cd712 100644 --- a/arch/arm/mach-at91/at91rm9200_devices.c +++ b/arch/arm/mach-at91/at91rm9200_devices.c @@ -511,7 +511,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91rm9200_twi_device = { - .name = "at91_i2c", + .name = "i2c-at91rm9200", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), diff --git a/arch/arm/mach-at91/at91sam9260.c b/arch/arm/mach-at91/at91sam9260.c index 30c7f26a4668c34e3739955a782ef3ec2befb978..ad29f93f20cab175555cd2a8c2974deff0fe31fd 100644 --- a/arch/arm/mach-at91/at91sam9260.c +++ b/arch/arm/mach-at91/at91sam9260.c @@ -211,6 +211,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk), CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20", &twi_clk), /* more usart lookup table for DT entries */ CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck), CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk), @@ -219,6 +221,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk), CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk), CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk), + CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk), /* more tc lookup table for DT entries */ CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk), CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk), diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c index af50ff3281c7153b46ec054d3aa2c14488ea2fbb..a76b8684f52d07328fcfe2f4a08726124b643f5a 100644 --- a/arch/arm/mach-at91/at91sam9260_devices.c +++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -421,7 +421,6 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9260_twi_device = { - .name = "at91_i2c", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), @@ -429,6 +428,13 @@ static struct platform_device at91sam9260_twi_device = { void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) { + /* IP version is not the same on 9260 and g20 */ + if (cpu_is_at91sam9g20()) { + at91sam9260_twi_device.name = "i2c-at91sam9g20"; + } else { + at91sam9260_twi_device.name = "i2c-at91sam9260"; + } + /* pins used for TWI interface */ at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */ at91_set_multi_drive(AT91_PIN_PA23, 1); diff --git a/arch/arm/mach-at91/at91sam9261.c b/arch/arm/mach-at91/at91sam9261.c index f40762c5fedee898fb836b24556f50499ee2858e..8d999eb1a137f1ed72529d296774c084d17da1a4 100644 --- a/arch/arm/mach-at91/at91sam9261.c +++ b/arch/arm/mach-at91/at91sam9261.c @@ -178,6 +178,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.2", &ssc2_clk), CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261", &twi_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10", &twi_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9261_devices.c b/arch/arm/mach-at91/at91sam9261_devices.c index 11e9fa835cde2e296f5c585a43fc8f1aecf48cff..9752f17efba9926501a23b8e5209fbabcdfedc6d 100644 --- a/arch/arm/mach-at91/at91sam9261_devices.c +++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -317,7 +317,6 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9261_twi_device = { - .name = "at91_i2c", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), @@ -325,12 +324,19 @@ static struct platform_device at91sam9261_twi_device = { void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) { + /* IP version is not the same on 9261 and g10 */ + if (cpu_is_at91sam9g10()) { + at91sam9261_twi_device.name = "i2c-at91sam9g10"; + /* I2C PIO must not be configured as open-drain on this chip */ + } else { + at91sam9261_twi_device.name = "i2c-at91sam9261"; + at91_set_multi_drive(AT91_PIN_PA7, 1); + at91_set_multi_drive(AT91_PIN_PA8, 1); + } + /* pins used for TWI interface */ at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PA7, 1); - at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PA8, 1); i2c_register_board_info(0, devices, nr_devices); platform_device_register(&at91sam9261_twi_device); diff --git a/arch/arm/mach-at91/at91sam9263.c b/arch/arm/mach-at91/at91sam9263.c index 144ef5de51b6beaf3b989801277aabe94aefe97b..6a01d0360dfb8940cbaaa2affc9bb58f88d702d9 100644 --- a/arch/arm/mach-at91/at91sam9263.c +++ b/arch/arm/mach-at91/at91sam9263.c @@ -193,6 +193,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260", &twi_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk), CLKDEV_CON_ID("pioA", &pioA_clk), @@ -210,6 +211,7 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk), CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk), + CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk), }; static struct clk_lookup usart_clocks_lookups[] = { diff --git a/arch/arm/mach-at91/at91sam9263_devices.c b/arch/arm/mach-at91/at91sam9263_devices.c index 7c0898fe20fa5850d174f69b2d43f48c645a6a30..8dde220b42b69c785c70118a16e48a1aa20acb95 100644 --- a/arch/arm/mach-at91/at91sam9263_devices.c +++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -599,7 +599,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9263_twi_device = { - .name = "at91_i2c", + .name = "i2c-at91sam9260", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), diff --git a/arch/arm/mach-at91/at91sam9g45.c b/arch/arm/mach-at91/at91sam9g45.c index ef6cedd52e3c2e71fdfb6dd8e68158b8ef622420..84af1b506d92a0b1e9e88c885b1d57be95fbf40b 100644 --- a/arch/arm/mach-at91/at91sam9g45.c +++ b/arch/arm/mach-at91/at91sam9g45.c @@ -237,6 +237,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk), CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.1", &twi1_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk), @@ -254,6 +256,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk), CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk), + CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk), /* fake hclk clock */ CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk), CLKDEV_CON_ID("pioA", &pioA_clk), diff --git a/arch/arm/mach-at91/at91sam9g45_devices.c b/arch/arm/mach-at91/at91sam9g45_devices.c index e4c3b3709204256297f6887ed89ab74847159841..b1596072dcc23cd1414a8449eb4c25a35ed11222 100644 --- a/arch/arm/mach-at91/at91sam9g45_devices.c +++ b/arch/arm/mach-at91/at91sam9g45_devices.c @@ -653,7 +653,7 @@ static struct resource twi0_resources[] = { }; static struct platform_device at91sam9g45_twi0_device = { - .name = "at91_i2c", + .name = "i2c-at91sam9g10", .id = 0, .resource = twi0_resources, .num_resources = ARRAY_SIZE(twi0_resources), @@ -673,7 +673,7 @@ static struct resource twi1_resources[] = { }; static struct platform_device at91sam9g45_twi1_device = { - .name = "at91_i2c", + .name = "i2c-at91sam9g10", .id = 1, .resource = twi1_resources, .num_resources = ARRAY_SIZE(twi1_resources), @@ -686,18 +686,12 @@ void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, in /* pins used for TWI interface */ if (i2c_id == 0) { at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PA20, 1); - at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PA21, 1); platform_device_register(&at91sam9g45_twi0_device); } else { at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */ - at91_set_multi_drive(AT91_PIN_PB10, 1); - at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */ - at91_set_multi_drive(AT91_PIN_PB11, 1); platform_device_register(&at91sam9g45_twi1_device); } diff --git a/arch/arm/mach-at91/at91sam9n12.c b/arch/arm/mach-at91/at91sam9n12.c index 08494664ab78d362fcc3b62878cff83ce2cd3921..732d3d3f4ec5f7f93430839330d0e473a8063c20 100644 --- a/arch/arm/mach-at91/at91sam9n12.c +++ b/arch/arm/mach-at91/at91sam9n12.c @@ -169,6 +169,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk), + CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), CLKDEV_CON_ID("pioA", &pioAB_clk), CLKDEV_CON_ID("pioB", &pioAB_clk), CLKDEV_CON_ID("pioC", &pioCD_clk), diff --git a/arch/arm/mach-at91/at91sam9rl.c b/arch/arm/mach-at91/at91sam9rl.c index 72ce50a50de5a278e21535422c1572bb95837a36..72e908412222615134fc0530cc339348093f76be 100644 --- a/arch/arm/mach-at91/at91sam9rl.c +++ b/arch/arm/mach-at91/at91sam9rl.c @@ -186,6 +186,8 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.0", &ssc0_clk), CLKDEV_CON_DEV_ID("pclk", "ssc.1", &ssc1_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk), CLKDEV_CON_ID("pioA", &pioA_clk), CLKDEV_CON_ID("pioB", &pioB_clk), CLKDEV_CON_ID("pioC", &pioC_clk), diff --git a/arch/arm/mach-at91/at91sam9rl_devices.c b/arch/arm/mach-at91/at91sam9rl_devices.c index deafea0e493dd41c9a20e52acab75baca1badbf0..d6ca0543ce8d7f1054d8f25614cd17369efe283d 100644 --- a/arch/arm/mach-at91/at91sam9rl_devices.c +++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -346,7 +346,7 @@ static struct resource twi_resources[] = { }; static struct platform_device at91sam9rl_twi_device = { - .name = "at91_i2c", + .name = "i2c-at91sam9g20", .id = -1, .resource = twi_resources, .num_resources = ARRAY_SIZE(twi_resources), diff --git a/arch/arm/mach-at91/at91sam9x5.c b/arch/arm/mach-at91/at91sam9x5.c index 477cf9d06672c7259cca0dab641bcb099de8e6b5..e5035380dcbce16e806fb460625fd73d9a3c1153 100644 --- a/arch/arm/mach-at91/at91sam9x5.c +++ b/arch/arm/mach-at91/at91sam9x5.c @@ -231,6 +231,9 @@ static struct clk_lookup periph_clocks_lookups[] = { CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk), CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk), + CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk), + CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk), + CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk), CLKDEV_CON_ID("pioA", &pioAB_clk), CLKDEV_CON_ID("pioB", &pioAB_clk), CLKDEV_CON_ID("pioC", &pioCD_clk), diff --git a/arch/arm/mach-at91/clock.c b/arch/arm/mach-at91/clock.c index 188c82971ebd069ac890f90726660e8181e6848b..33361505c0cd70cc3171f64ec4d5306670b2cd4b 100644 --- a/arch/arm/mach-at91/clock.c +++ b/arch/arm/mach-at91/clock.c @@ -625,7 +625,7 @@ fail: return 0; } -static struct clk *const standard_pmc_clocks[] __initdata = { +static struct clk *const standard_pmc_clocks[] __initconst = { /* four primary clocks */ &clk32k, &main_clk, diff --git a/arch/arm/mach-at91/include/mach/at91_twi.h b/arch/arm/mach-at91/include/mach/at91_twi.h deleted file mode 100644 index bb2880f6ba37d520a9de1c897628d20bd221cca2..0000000000000000000000000000000000000000 --- a/arch/arm/mach-at91/include/mach/at91_twi.h +++ /dev/null @@ -1,68 +0,0 @@ -/* - * arch/arm/mach-at91/include/mach/at91_twi.h - * - * Copyright (C) 2005 Ivan Kokshaysky - * Copyright (C) SAN People - * - * Two-wire Interface (TWI) registers. - * Based on AT91RM9200 datasheet revision E. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef AT91_TWI_H -#define AT91_TWI_H - -#define AT91_TWI_CR 0x00 /* Control Register */ -#define AT91_TWI_START (1 << 0) /* Send a Start Condition */ -#define AT91_TWI_STOP (1 << 1) /* Send a Stop Condition */ -#define AT91_TWI_MSEN (1 << 2) /* Master Transfer Enable */ -#define AT91_TWI_MSDIS (1 << 3) /* Master Transfer Disable */ -#define AT91_TWI_SVEN (1 << 4) /* Slave Transfer Enable [SAM9260 only] */ -#define AT91_TWI_SVDIS (1 << 5) /* Slave Transfer Disable [SAM9260 only] */ -#define AT91_TWI_SWRST (1 << 7) /* Software Reset */ - -#define AT91_TWI_MMR 0x04 /* Master Mode Register */ -#define AT91_TWI_IADRSZ (3 << 8) /* Internal Device Address Size */ -#define AT91_TWI_IADRSZ_NO (0 << 8) -#define AT91_TWI_IADRSZ_1 (1 << 8) -#define AT91_TWI_IADRSZ_2 (2 << 8) -#define AT91_TWI_IADRSZ_3 (3 << 8) -#define AT91_TWI_MREAD (1 << 12) /* Master Read Direction */ -#define AT91_TWI_DADR (0x7f << 16) /* Device Address */ - -#define AT91_TWI_SMR 0x08 /* Slave Mode Register [SAM9260 only] */ -#define AT91_TWI_SADR (0x7f << 16) /* Slave Address */ - -#define AT91_TWI_IADR 0x0c /* Internal Address Register */ - -#define AT91_TWI_CWGR 0x10 /* Clock Waveform Generator Register */ -#define AT91_TWI_CLDIV (0xff << 0) /* Clock Low Divisor */ -#define AT91_TWI_CHDIV (0xff << 8) /* Clock High Divisor */ -#define AT91_TWI_CKDIV (7 << 16) /* Clock Divider */ - -#define AT91_TWI_SR 0x20 /* Status Register */ -#define AT91_TWI_TXCOMP (1 << 0) /* Transmission Complete */ -#define AT91_TWI_RXRDY (1 << 1) /* Receive Holding Register Ready */ -#define AT91_TWI_TXRDY (1 << 2) /* Transmit Holding Register Ready */ -#define AT91_TWI_SVREAD (1 << 3) /* Slave Read [SAM9260 only] */ -#define AT91_TWI_SVACC (1 << 4) /* Slave Access [SAM9260 only] */ -#define AT91_TWI_GACC (1 << 5) /* General Call Access [SAM9260 only] */ -#define AT91_TWI_OVRE (1 << 6) /* Overrun Error [AT91RM9200 only] */ -#define AT91_TWI_UNRE (1 << 7) /* Underrun Error [AT91RM9200 only] */ -#define AT91_TWI_NACK (1 << 8) /* Not Acknowledged */ -#define AT91_TWI_ARBLST (1 << 9) /* Arbitration Lost [SAM9260 only] */ -#define AT91_TWI_SCLWS (1 << 10) /* Clock Wait State [SAM9260 only] */ -#define AT91_TWI_EOSACC (1 << 11) /* End of Slave Address [SAM9260 only] */ - -#define AT91_TWI_IER 0x24 /* Interrupt Enable Register */ -#define AT91_TWI_IDR 0x28 /* Interrupt Disable Register */ -#define AT91_TWI_IMR 0x2c /* Interrupt Mask Register */ -#define AT91_TWI_RHR 0x30 /* Receive Holding Register */ -#define AT91_TWI_THR 0x34 /* Transmit Holding Register */ - -#endif - diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 2c2d86505a541fe1964f3f717d7e81c04f9e6a30..5315f05896e9e9b59d71aa0a2f95d8a4989c0e91 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -153,7 +153,9 @@ static int at91_pm_verify_clocks(void) } } -#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + if (!IS_ENABLED(CONFIG_AT91_PROGRAMMABLE_CLOCKS)) + return 1; + /* PCK0..PCK3 must be disabled, or configured to use clk32k */ for (i = 0; i < 4; i++) { u32 css; @@ -167,7 +169,6 @@ static int at91_pm_verify_clocks(void) return 0; } } -#endif return 1; } diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index e6f52de1062fd960fbd3fc015fb5c8e2211ba91f..da9881b161e1e15dc0693a74c2ce2716a0ebd5d3 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -87,7 +87,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length) iotable_init(desc, 1); } -static struct map_desc at91_io_desc __initdata = { +static struct map_desc at91_io_desc __initdata __maybe_unused = { .virtual = (unsigned long)AT91_VA_BASE_SYS, .pfn = __phys_to_pfn(AT91_BASE_SYS), .length = SZ_16K, diff --git a/arch/arm/mach-clps711x/Kconfig b/arch/arm/mach-clps711x/Kconfig index e6135363765a014fb4566b403f4619b3adaf4dee..263242da2cb8462ca8504146211dc218d5166e7f 100644 --- a/arch/arm/mach-clps711x/Kconfig +++ b/arch/arm/mach-clps711x/Kconfig @@ -23,9 +23,9 @@ config ARCH_CLEP7312 config ARCH_EDB7211 bool "EDB7211" - select ISA - select ARCH_SPARSEMEM_ENABLE select ARCH_SELECT_MEMORY_MODEL + select ARCH_SPARSEMEM_ENABLE + select ISA help Say Y here if you intend to run this kernel on a Cirrus Logic EDB-7211 evaluation board. diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index 3fb79a1d0bde3e94f9804d9d0a4f47e1e490a937..32871918bb6e7bbe1fb2e01de752d037e478c5a3 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -23,6 +23,8 @@ #include #include #include +#include +#include #include #include @@ -62,9 +64,26 @@ void __init autcpu12_map_io(void) iotable_init(autcpu12_io_desc, ARRAY_SIZE(autcpu12_io_desc)); } +static struct resource autcpu12_nvram_resource[] __initdata = { + DEFINE_RES_MEM_NAMED(AUTCPU12_PHYS_NVRAM, SZ_128K, "SRAM"), +}; + +static struct platform_device autcpu12_nvram_pdev __initdata = { + .name = "autcpu12_nvram", + .id = -1, + .resource = autcpu12_nvram_resource, + .num_resources = ARRAY_SIZE(autcpu12_nvram_resource), +}; + +static void __init autcpu12_init(void) +{ + platform_device_register(&autcpu12_nvram_pdev); +} + MACHINE_START(AUTCPU12, "autronix autcpu12") /* Maintainer: Thomas Gleixner */ .atag_offset = 0x20000, + .init_machine = autcpu12_init, .map_io = autcpu12_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index ab99c3c3b752689e50db5720e2d36beb23ee2b21..f8eecb9594132b73375cc9fbe578159755005405 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -4,12 +4,12 @@ config AINTC bool config CP_INTC - select IRQ_DOMAIN bool + select IRQ_DOMAIN config ARCH_DAVINCI_DMx - select CPU_ARM926T bool + select CPU_ARM926T menu "TI DaVinci Implementations" @@ -32,19 +32,19 @@ config ARCH_DAVINCI_DM646x config ARCH_DAVINCI_DA830 bool "DA830/OMAP-L137/AM17x based system" - select CP_INTC select ARCH_DAVINCI_DA8XX select CPU_DCACHE_WRITETHROUGH # needed on silicon revs 1.0, 1.1 + select CP_INTC config ARCH_DAVINCI_DA850 bool "DA850/OMAP-L138/AM18x based system" - select CP_INTC select ARCH_DAVINCI_DA8XX select ARCH_HAS_CPUFREQ + select CP_INTC config ARCH_DAVINCI_DA8XX - select CPU_ARM926T bool + select CPU_ARM926T config ARCH_DAVINCI_DM365 bool "DaVinci 365 based system" @@ -52,9 +52,9 @@ config ARCH_DAVINCI_DM365 select ARCH_DAVINCI_DMx config ARCH_DAVINCI_TNETV107X + bool "TNETV107X based system" select CPU_V6 select CP_INTC - bool "TNETV107X based system" comment "DaVinci Board Type" @@ -103,9 +103,9 @@ config MACH_DAVINCI_DM6467_EVM bool "TI DM6467 EVM" default ARCH_DAVINCI_DM646x depends on ARCH_DAVINCI_DM646x - select MACH_DAVINCI_DM6467TEVM select EEPROM_AT24 select I2C + select MACH_DAVINCI_DM6467TEVM help Configure this option to specify the whether the board used for development is a DM6467 EVM @@ -127,8 +127,8 @@ config MACH_DAVINCI_DA830_EVM bool "TI DA830/OMAP-L137/AM17x Reference Platform" default ARCH_DAVINCI_DA830 depends on ARCH_DAVINCI_DA830 - select GPIO_PCF857X select EEPROM_AT24 + select GPIO_PCF857X select I2C help Say Y here to select the TI DA830/OMAP-L137/AM17x Evaluation Module. @@ -186,6 +186,13 @@ config DA850_UI_RMII NOTE: Please take care while choosing this option, MII PHY will not be functional if RMII mode is selected. +config DA850_UI_SD_VIDEO_PORT + bool "Video Port Interface" + help + Say Y if you want to use Video Port Interface (VPIF) on the + DA850/OMAP-L138 EVM. The Video decoders/encoders are found on the + UI daughter card that is supplied with the EVM. + endchoice config DA850_WL12XX diff --git a/arch/arm/mach-davinci/asp.h b/arch/arm/mach-davinci/asp.h new file mode 100644 index 0000000000000000000000000000000000000000..d9b2acd12393ab0e8f4968403ce5ad901553d146 --- /dev/null +++ b/arch/arm/mach-davinci/asp.h @@ -0,0 +1,49 @@ +/* + * TI DaVinci Audio definitions + */ +#ifndef __ASM_ARCH_DAVINCI_ASP_H +#define __ASM_ARCH_DAVINCI_ASP_H + +/* Bases of dm644x and dm355 register banks */ +#define DAVINCI_ASP0_BASE 0x01E02000 +#define DAVINCI_ASP1_BASE 0x01E04000 + +/* Bases of dm365 register banks */ +#define DAVINCI_DM365_ASP0_BASE 0x01D02000 + +/* Bases of dm646x register banks */ +#define DAVINCI_DM646X_MCASP0_REG_BASE 0x01D01000 +#define DAVINCI_DM646X_MCASP1_REG_BASE 0x01D01800 + +/* Bases of da850/da830 McASP0 register banks */ +#define DAVINCI_DA8XX_MCASP0_REG_BASE 0x01D00000 + +/* Bases of da830 McASP1 register banks */ +#define DAVINCI_DA830_MCASP1_REG_BASE 0x01D04000 + +/* EDMA channels of dm644x and dm355 */ +#define DAVINCI_DMA_ASP0_TX 2 +#define DAVINCI_DMA_ASP0_RX 3 +#define DAVINCI_DMA_ASP1_TX 8 +#define DAVINCI_DMA_ASP1_RX 9 + +/* EDMA channels of dm646x */ +#define DAVINCI_DM646X_DMA_MCASP0_AXEVT0 6 +#define DAVINCI_DM646X_DMA_MCASP0_AREVT0 9 +#define DAVINCI_DM646X_DMA_MCASP1_AXEVT1 12 + +/* EDMA channels of da850/da830 McASP0 */ +#define DAVINCI_DA8XX_DMA_MCASP0_AREVT 0 +#define DAVINCI_DA8XX_DMA_MCASP0_AXEVT 1 + +/* EDMA channels of da830 McASP1 */ +#define DAVINCI_DA830_DMA_MCASP1_AREVT 2 +#define DAVINCI_DA830_DMA_MCASP1_AXEVT 3 + +/* Interrupts */ +#define DAVINCI_ASP0_RX_INT IRQ_MBRINT +#define DAVINCI_ASP0_TX_INT IRQ_MBXINT +#define DAVINCI_ASP1_RX_INT IRQ_MBRINT +#define DAVINCI_ASP1_TX_INT IRQ_MBXINT + +#endif /* __ASM_ARCH_DAVINCI_ASP_H */ diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c index 1295e616ceee7e32a5b31d62b3cf52a4286578b3..32ee3f89596738d988a00105c0358d4ff1a61f1b 100644 --- a/arch/arm/mach-davinci/board-da850-evm.c +++ b/arch/arm/mach-davinci/board-da850-evm.c @@ -45,6 +45,9 @@ #include #include +#include +#include + #define DA850_EVM_PHY_ID "davinci_mdio-0:00" #define DA850_LCD_PWR_PIN GPIO_TO_PIN(2, 8) #define DA850_LCD_BL_PIN GPIO_TO_PIN(2, 15) @@ -452,6 +455,15 @@ static void da850_evm_ui_keys_init(unsigned gpio) } } +#ifdef CONFIG_DA850_UI_SD_VIDEO_PORT +static inline void da850_evm_setup_video_port(int video_sel) +{ + gpio_set_value_cansleep(video_sel, 0); +} +#else +static inline void da850_evm_setup_video_port(int video_sel) { } +#endif + static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, unsigned ngpio, void *c) { @@ -497,6 +509,8 @@ static int da850_evm_ui_expander_setup(struct i2c_client *client, unsigned gpio, da850_evm_setup_emac_rmii(sel_a); + da850_evm_setup_video_port(sel_c); + return 0; exp_setup_keys_fail: @@ -1149,6 +1163,169 @@ static __init int da850_evm_init_cpufreq(void) static __init int da850_evm_init_cpufreq(void) { return 0; } #endif +#if defined(CONFIG_DA850_UI_SD_VIDEO_PORT) + +#define TVP5147_CH0 "tvp514x-0" +#define TVP5147_CH1 "tvp514x-1" + +/* VPIF capture configuration */ +static struct tvp514x_platform_data tvp5146_pdata = { + .clk_polarity = 0, + .hs_polarity = 1, + .vs_polarity = 1, +}; + +#define TVP514X_STD_ALL (V4L2_STD_NTSC | V4L2_STD_PAL) + +static const struct vpif_input da850_ch0_inputs[] = { + { + .input = { + .index = 0, + .name = "Composite", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_STD, + .std = TVP514X_STD_ALL, + }, + .input_route = INPUT_CVBS_VI2B, + .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, + .subdev_name = TVP5147_CH0, + }, +}; + +static const struct vpif_input da850_ch1_inputs[] = { + { + .input = { + .index = 0, + .name = "S-Video", + .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_STD, + .std = TVP514X_STD_ALL, + }, + .input_route = INPUT_SVIDEO_VI2C_VI1C, + .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, + .subdev_name = TVP5147_CH1, + }, +}; + +static struct vpif_subdev_info da850_vpif_capture_sdev_info[] = { + { + .name = TVP5147_CH0, + .board_info = { + I2C_BOARD_INFO("tvp5146", 0x5d), + .platform_data = &tvp5146_pdata, + }, + }, + { + .name = TVP5147_CH1, + .board_info = { + I2C_BOARD_INFO("tvp5146", 0x5c), + .platform_data = &tvp5146_pdata, + }, + }, +}; + +static struct vpif_capture_config da850_vpif_capture_config = { + .subdev_info = da850_vpif_capture_sdev_info, + .subdev_count = ARRAY_SIZE(da850_vpif_capture_sdev_info), + .chan_config[0] = { + .inputs = da850_ch0_inputs, + .input_count = ARRAY_SIZE(da850_ch0_inputs), + .vpif_if = { + .if_type = VPIF_IF_BT656, + .hd_pol = 1, + .vd_pol = 1, + .fid_pol = 0, + }, + }, + .chan_config[1] = { + .inputs = da850_ch1_inputs, + .input_count = ARRAY_SIZE(da850_ch1_inputs), + .vpif_if = { + .if_type = VPIF_IF_BT656, + .hd_pol = 1, + .vd_pol = 1, + .fid_pol = 0, + }, + }, + .card_name = "DA850/OMAP-L138 Video Capture", +}; + +/* VPIF display configuration */ +static struct vpif_subdev_info da850_vpif_subdev[] = { + { + .name = "adv7343", + .board_info = { + I2C_BOARD_INFO("adv7343", 0x2a), + }, + }, +}; + +static const struct vpif_output da850_ch0_outputs[] = { + { + .output = { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_STD, + .std = V4L2_STD_ALL, + }, + .subdev_name = "adv7343", + .output_route = ADV7343_COMPOSITE_ID, + }, + { + .output = { + .index = 1, + .name = "S-Video", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_STD, + .std = V4L2_STD_ALL, + }, + .subdev_name = "adv7343", + .output_route = ADV7343_SVIDEO_ID, + }, +}; + +static struct vpif_display_config da850_vpif_display_config = { + .subdevinfo = da850_vpif_subdev, + .subdev_count = ARRAY_SIZE(da850_vpif_subdev), + .chan_config[0] = { + .outputs = da850_ch0_outputs, + .output_count = ARRAY_SIZE(da850_ch0_outputs), + }, + .card_name = "DA850/OMAP-L138 Video Display", +}; + +static __init void da850_vpif_init(void) +{ + int ret; + + ret = da850_register_vpif(); + if (ret) + pr_warn("da850_evm_init: VPIF setup failed: %d\n", ret); + + ret = davinci_cfg_reg_list(da850_vpif_capture_pins); + if (ret) + pr_warn("da850_evm_init: VPIF capture mux setup failed: %d\n", + ret); + + ret = da850_register_vpif_capture(&da850_vpif_capture_config); + if (ret) + pr_warn("da850_evm_init: VPIF capture setup failed: %d\n", ret); + + ret = davinci_cfg_reg_list(da850_vpif_display_pins); + if (ret) + pr_warn("da850_evm_init: VPIF display mux setup failed: %d\n", + ret); + + ret = da850_register_vpif_display(&da850_vpif_display_config); + if (ret) + pr_warn("da850_evm_init: VPIF display setup failed: %d\n", ret); +} + +#else +static __init void da850_vpif_init(void) {} +#endif + #ifdef CONFIG_DA850_WL12XX static void wl12xx_set_power(int index, bool power_on) @@ -1375,6 +1552,8 @@ static __init void da850_evm_init(void) pr_warning("da850_evm_init: suspend registration failed: %d\n", ret); + da850_vpif_init(); + ret = da8xx_register_spi(1, da850evm_spi_info, ARRAY_SIZE(da850evm_spi_info)); if (ret) diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index ca72fc4b8ccaac489b3e5e4e800e84e73730149e..f22572cee49d89ade236851a04fdf2ba94fed2e6 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -23,6 +23,7 @@ #include #include #include +#include #include #include @@ -620,7 +621,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { { .name = "ntsc", .timings_type = VPBE_ENC_STD, - .timings = {V4L2_STD_525_60}, + .std_id = V4L2_STD_525_60, .interlaced = 1, .xres = 720, .yres = 480, @@ -632,7 +633,7 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { { .name = "pal", .timings_type = VPBE_ENC_STD, - .timings = {V4L2_STD_625_50}, + .std_id = V4L2_STD_625_50, .interlaced = 1, .xres = 720, .yres = 576, @@ -647,8 +648,8 @@ static struct vpbe_enc_mode_info dm644xevm_enc_std_timing[] = { static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = { { .name = "480p59_94", - .timings_type = VPBE_ENC_DV_PRESET, - .timings = {V4L2_DV_480P59_94}, + .timings_type = VPBE_ENC_CUSTOM_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_720X480P59_94, .interlaced = 0, .xres = 720, .yres = 480, @@ -659,8 +660,8 @@ static struct vpbe_enc_mode_info dm644xevm_enc_preset_timing[] = { }, { .name = "576p50", - .timings_type = VPBE_ENC_DV_PRESET, - .timings = {V4L2_DV_576P50}, + .timings_type = VPBE_ENC_CUSTOM_TIMINGS, + .dv_timings = V4L2_DV_BT_CEA_720X576P50, .interlaced = 0, .xres = 720, .yres = 576, @@ -698,7 +699,7 @@ static struct vpbe_output dm644xevm_vpbe_outputs[] = { .index = 1, .name = "Component", .type = V4L2_OUTPUT_TYPE_ANALOG, - .capabilities = V4L2_OUT_CAP_PRESETS, + .capabilities = V4L2_OUT_CAP_DV_TIMINGS, }, .subdev_name = VPBE_VENC_SUBDEV_NAME, .default_mode = "480p59_94", diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c index 9944367b4931b9a630a5bd91db7d6e784aebf75f..1dbf85beed1baaf55718a7f00debd3416327e66d 100644 --- a/arch/arm/mach-davinci/board-dm646x-evm.c +++ b/arch/arm/mach-davinci/board-dm646x-evm.c @@ -26,6 +26,7 @@ #include #include +#include #include #include @@ -496,18 +497,49 @@ static struct vpif_subdev_info dm646x_vpif_subdev[] = { }, }; -static const char *output[] = { - "Composite", - "Component", - "S-Video", +static const struct vpif_output dm6467_ch0_outputs[] = { + { + .output = { + .index = 0, + .name = "Composite", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_STD, + .std = V4L2_STD_ALL, + }, + .subdev_name = "adv7343", + .output_route = ADV7343_COMPOSITE_ID, + }, + { + .output = { + .index = 1, + .name = "Component", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_CUSTOM_TIMINGS, + }, + .subdev_name = "adv7343", + .output_route = ADV7343_COMPONENT_ID, + }, + { + .output = { + .index = 2, + .name = "S-Video", + .type = V4L2_OUTPUT_TYPE_ANALOG, + .capabilities = V4L2_OUT_CAP_STD, + .std = V4L2_STD_ALL, + }, + .subdev_name = "adv7343", + .output_route = ADV7343_SVIDEO_ID, + }, }; static struct vpif_display_config dm646x_vpif_display_config = { .set_clock = set_vpif_clock, .subdevinfo = dm646x_vpif_subdev, .subdev_count = ARRAY_SIZE(dm646x_vpif_subdev), - .output = output, - .output_count = ARRAY_SIZE(output), + .chan_config[0] = { + .outputs = dm6467_ch0_outputs, + .output_count = ARRAY_SIZE(dm6467_ch0_outputs), + }, .card_name = "DM646x EVM", }; @@ -601,15 +633,6 @@ static struct vpif_subdev_info vpif_capture_sdev_info[] = { I2C_BOARD_INFO("tvp5146", 0x5d), .platform_data = &tvp5146_pdata, }, - .input = INPUT_CVBS_VI2B, - .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, - .can_route = 1, - .vpif_if = { - .if_type = VPIF_IF_BT656, - .hd_pol = 1, - .vd_pol = 1, - .fid_pol = 0, - }, }, { .name = TVP5147_CH1, @@ -617,15 +640,6 @@ static struct vpif_subdev_info vpif_capture_sdev_info[] = { I2C_BOARD_INFO("tvp5146", 0x5c), .platform_data = &tvp5146_pdata, }, - .input = INPUT_SVIDEO_VI2C_VI1C, - .output = OUTPUT_10BIT_422_EMBEDDED_SYNC, - .can_route = 1, - .vpif_if = { - .if_type = VPIF_IF_BT656, - .hd_pol = 1, - .vd_pol = 1, - .fid_pol = 0, - }, }, }; @@ -635,9 +649,12 @@ static const struct vpif_input dm6467_ch0_inputs[] = { .index = 0, .name = "Composite", .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_STD, .std = TVP514X_STD_ALL, }, .subdev_name = TVP5147_CH0, + .input_route = INPUT_CVBS_VI2B, + .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, }, }; @@ -647,9 +664,12 @@ static const struct vpif_input dm6467_ch1_inputs[] = { .index = 0, .name = "S-Video", .type = V4L2_INPUT_TYPE_CAMERA, + .capabilities = V4L2_IN_CAP_STD, .std = TVP514X_STD_ALL, }, .subdev_name = TVP5147_CH1, + .input_route = INPUT_SVIDEO_VI2C_VI1C, + .output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC, }, }; @@ -661,10 +681,22 @@ static struct vpif_capture_config dm646x_vpif_capture_cfg = { .chan_config[0] = { .inputs = dm6467_ch0_inputs, .input_count = ARRAY_SIZE(dm6467_ch0_inputs), + .vpif_if = { + .if_type = VPIF_IF_BT656, + .hd_pol = 1, + .vd_pol = 1, + .fid_pol = 0, + }, }, .chan_config[1] = { .inputs = dm6467_ch1_inputs, .input_count = ARRAY_SIZE(dm6467_ch1_inputs), + .vpif_if = { + .if_type = VPIF_IF_BT656, + .hd_pol = 1, + .vd_pol = 1, + .fid_pol = 0, + }, }, }; diff --git a/arch/arm/mach-davinci/board-tnetv107x-evm.c b/arch/arm/mach-davinci/board-tnetv107x-evm.c index ac4e003ad86336e61cb4774a0934f437bbfdfaca..be3099733b1fb2ab6eb857998cb4a2838a49ff70 100644 --- a/arch/arm/mach-davinci/board-tnetv107x-evm.c +++ b/arch/arm/mach-davinci/board-tnetv107x-evm.c @@ -88,7 +88,7 @@ static struct davinci_mmc_config mmc_config = { .version = MMC_CTLR_VERSION_1, }; -static const short sdio1_pins[] __initdata = { +static const short sdio1_pins[] __initconst = { TNETV107X_SDIO1_CLK_1, TNETV107X_SDIO1_CMD_1, TNETV107X_SDIO1_DATA0_1, TNETV107X_SDIO1_DATA1_1, TNETV107X_SDIO1_DATA2_1, TNETV107X_SDIO1_DATA3_1, @@ -96,12 +96,12 @@ static const short sdio1_pins[] __initdata = { -1 }; -static const short uart1_pins[] __initdata = { +static const short uart1_pins[] __initconst = { TNETV107X_UART1_RD, TNETV107X_UART1_TD, -1 }; -static const short ssp_pins[] __initdata = { +static const short ssp_pins[] __initconst = { TNETV107X_SSP0_0, TNETV107X_SSP0_1, TNETV107X_SSP0_2, TNETV107X_SSP1_0, TNETV107X_SSP1_1, TNETV107X_SSP1_2, TNETV107X_SSP1_3, -1 diff --git a/arch/arm/mach-davinci/da830.c b/arch/arm/mach-davinci/da830.c index deee5c2da7546b987be46b596b00bef4bbf04d1f..510648e0394b80d4f6186f93ae4516f7624d7dbb 100644 --- a/arch/arm/mach-davinci/da830.c +++ b/arch/arm/mach-davinci/da830.c @@ -838,7 +838,7 @@ static const struct mux_config da830_pins[] = { #endif }; -const short da830_emif25_pins[] __initdata = { +const short da830_emif25_pins[] __initconst = { DA830_EMA_D_0, DA830_EMA_D_1, DA830_EMA_D_2, DA830_EMA_D_3, DA830_EMA_D_4, DA830_EMA_D_5, DA830_EMA_D_6, DA830_EMA_D_7, DA830_EMA_D_8, DA830_EMA_D_9, DA830_EMA_D_10, DA830_EMA_D_11, @@ -853,19 +853,19 @@ const short da830_emif25_pins[] __initdata = { -1 }; -const short da830_spi0_pins[] __initdata = { +const short da830_spi0_pins[] __initconst = { DA830_SPI0_SOMI_0, DA830_SPI0_SIMO_0, DA830_SPI0_CLK, DA830_NSPI0_ENA, DA830_NSPI0_SCS_0, -1 }; -const short da830_spi1_pins[] __initdata = { +const short da830_spi1_pins[] __initconst = { DA830_SPI1_SOMI_0, DA830_SPI1_SIMO_0, DA830_SPI1_CLK, DA830_NSPI1_ENA, DA830_NSPI1_SCS_0, -1 }; -const short da830_mmc_sd_pins[] __initdata = { +const short da830_mmc_sd_pins[] __initconst = { DA830_MMCSD_DAT_0, DA830_MMCSD_DAT_1, DA830_MMCSD_DAT_2, DA830_MMCSD_DAT_3, DA830_MMCSD_DAT_4, DA830_MMCSD_DAT_5, DA830_MMCSD_DAT_6, DA830_MMCSD_DAT_7, DA830_MMCSD_CLK, @@ -873,32 +873,32 @@ const short da830_mmc_sd_pins[] __initdata = { -1 }; -const short da830_uart0_pins[] __initdata = { +const short da830_uart0_pins[] __initconst = { DA830_NUART0_CTS, DA830_NUART0_RTS, DA830_UART0_RXD, DA830_UART0_TXD, -1 }; -const short da830_uart1_pins[] __initdata = { +const short da830_uart1_pins[] __initconst = { DA830_UART1_RXD, DA830_UART1_TXD, -1 }; -const short da830_uart2_pins[] __initdata = { +const short da830_uart2_pins[] __initconst = { DA830_UART2_RXD, DA830_UART2_TXD, -1 }; -const short da830_usb20_pins[] __initdata = { +const short da830_usb20_pins[] __initconst = { DA830_USB0_DRVVBUS, DA830_USB_REFCLKIN, -1 }; -const short da830_usb11_pins[] __initdata = { +const short da830_usb11_pins[] __initconst = { DA830_USB_REFCLKIN, -1 }; -const short da830_uhpi_pins[] __initdata = { +const short da830_uhpi_pins[] __initconst = { DA830_UHPI_HD_0, DA830_UHPI_HD_1, DA830_UHPI_HD_2, DA830_UHPI_HD_3, DA830_UHPI_HD_4, DA830_UHPI_HD_5, DA830_UHPI_HD_6, DA830_UHPI_HD_7, DA830_UHPI_HD_8, DA830_UHPI_HD_9, DA830_UHPI_HD_10, DA830_UHPI_HD_11, @@ -909,14 +909,14 @@ const short da830_uhpi_pins[] __initdata = { -1 }; -const short da830_cpgmac_pins[] __initdata = { +const short da830_cpgmac_pins[] __initconst = { DA830_RMII_TXD_0, DA830_RMII_TXD_1, DA830_RMII_TXEN, DA830_RMII_CRS_DV, DA830_RMII_RXD_0, DA830_RMII_RXD_1, DA830_RMII_RXER, DA830_MDIO_CLK, DA830_MDIO_D, -1 }; -const short da830_emif3c_pins[] __initdata = { +const short da830_emif3c_pins[] __initconst = { DA830_EMB_SDCKE, DA830_EMB_CLK_GLUE, DA830_EMB_CLK, DA830_NEMB_CS_0, DA830_NEMB_CAS, DA830_NEMB_RAS, DA830_NEMB_WE, DA830_EMB_BA_1, DA830_EMB_BA_0, DA830_EMB_A_0, DA830_EMB_A_1, DA830_EMB_A_2, @@ -935,7 +935,7 @@ const short da830_emif3c_pins[] __initdata = { -1 }; -const short da830_mcasp0_pins[] __initdata = { +const short da830_mcasp0_pins[] __initconst = { DA830_AHCLKX0, DA830_ACLKX0, DA830_AFSX0, DA830_AHCLKR0, DA830_ACLKR0, DA830_AFSR0, DA830_AMUTE0, DA830_AXR0_0, DA830_AXR0_1, DA830_AXR0_2, DA830_AXR0_3, @@ -945,7 +945,7 @@ const short da830_mcasp0_pins[] __initdata = { -1 }; -const short da830_mcasp1_pins[] __initdata = { +const short da830_mcasp1_pins[] __initconst = { DA830_AHCLKX1, DA830_ACLKX1, DA830_AFSX1, DA830_AHCLKR1, DA830_ACLKR1, DA830_AFSR1, DA830_AMUTE1, DA830_AXR1_0, DA830_AXR1_1, DA830_AXR1_2, DA830_AXR1_3, @@ -954,24 +954,24 @@ const short da830_mcasp1_pins[] __initdata = { -1 }; -const short da830_mcasp2_pins[] __initdata = { +const short da830_mcasp2_pins[] __initconst = { DA830_AHCLKX2, DA830_ACLKX2, DA830_AFSX2, DA830_AHCLKR2, DA830_ACLKR2, DA830_AFSR2, DA830_AMUTE2, DA830_AXR2_0, DA830_AXR2_1, DA830_AXR2_2, DA830_AXR2_3, -1 }; -const short da830_i2c0_pins[] __initdata = { +const short da830_i2c0_pins[] __initconst = { DA830_I2C0_SDA, DA830_I2C0_SCL, -1 }; -const short da830_i2c1_pins[] __initdata = { +const short da830_i2c1_pins[] __initconst = { DA830_I2C1_SCL, DA830_I2C1_SDA, -1 }; -const short da830_lcdcntl_pins[] __initdata = { +const short da830_lcdcntl_pins[] __initconst = { DA830_LCD_D_0, DA830_LCD_D_1, DA830_LCD_D_2, DA830_LCD_D_3, DA830_LCD_D_4, DA830_LCD_D_5, DA830_LCD_D_6, DA830_LCD_D_7, DA830_LCD_D_8, DA830_LCD_D_9, DA830_LCD_D_10, DA830_LCD_D_11, @@ -981,34 +981,34 @@ const short da830_lcdcntl_pins[] __initdata = { -1 }; -const short da830_pwm_pins[] __initdata = { +const short da830_pwm_pins[] __initconst = { DA830_ECAP0_APWM0, DA830_ECAP1_APWM1, DA830_EPWM0B, DA830_EPWM0A, DA830_EPWMSYNCI, DA830_EPWMSYNC0, DA830_ECAP2_APWM2, DA830_EHRPWMGLUETZ, DA830_EPWM2B, DA830_EPWM2A, DA830_EPWM1B, DA830_EPWM1A, -1 }; -const short da830_ecap0_pins[] __initdata = { +const short da830_ecap0_pins[] __initconst = { DA830_ECAP0_APWM0, -1 }; -const short da830_ecap1_pins[] __initdata = { +const short da830_ecap1_pins[] __initconst = { DA830_ECAP1_APWM1, -1 }; -const short da830_ecap2_pins[] __initdata = { +const short da830_ecap2_pins[] __initconst = { DA830_ECAP2_APWM2, -1 }; -const short da830_eqep0_pins[] __initdata = { +const short da830_eqep0_pins[] __initconst = { DA830_EQEP0I, DA830_EQEP0S, DA830_EQEP0A, DA830_EQEP0B, -1 }; -const short da830_eqep1_pins[] __initdata = { +const short da830_eqep1_pins[] __initconst = { DA830_EQEP1I, DA830_EQEP1S, DA830_EQEP1A, DA830_EQEP1B, -1 }; diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index b44dc844e15e0c2ce8c404486c75494749dfec51..b90c172d55413dc6e301ba15afff70f721d3c704 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -347,6 +347,13 @@ static struct clk spi1_clk = { .flags = DA850_CLK_ASYNC3, }; +static struct clk vpif_clk = { + .name = "vpif", + .parent = &pll0_sysclk2, + .lpsc = DA850_LPSC1_VPIF, + .gpsc = 1, +}; + static struct clk sata_clk = { .name = "sata", .parent = &pll0_sysclk2, @@ -397,6 +404,7 @@ static struct clk_lookup da850_clks[] = { CLK(NULL, "usb20", &usb20_clk), CLK("spi_davinci.0", NULL, &spi0_clk), CLK("spi_davinci.1", NULL, &spi1_clk), + CLK("vpif", NULL, &vpif_clk), CLK("ahci", NULL, &sata_clk), CLK(NULL, NULL, NULL), }; @@ -573,20 +581,60 @@ static const struct mux_config da850_pins[] = { MUX_CFG(DA850, GPIO6_10, 13, 20, 15, 8, false) MUX_CFG(DA850, GPIO6_13, 13, 8, 15, 8, false) MUX_CFG(DA850, RTC_ALARM, 0, 28, 15, 2, false) + /* VPIF Capture */ + MUX_CFG(DA850, VPIF_DIN0, 15, 4, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN1, 15, 0, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN2, 14, 28, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN3, 14, 24, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN4, 14, 20, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN5, 14, 16, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN6, 14, 12, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN7, 14, 8, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN8, 16, 4, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN9, 16, 0, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN10, 15, 28, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN11, 15, 24, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN12, 15, 20, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN13, 15, 16, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN14, 15, 12, 15, 1, false) + MUX_CFG(DA850, VPIF_DIN15, 15, 8, 15, 1, false) + MUX_CFG(DA850, VPIF_CLKIN0, 14, 0, 15, 1, false) + MUX_CFG(DA850, VPIF_CLKIN1, 14, 4, 15, 1, false) + MUX_CFG(DA850, VPIF_CLKIN2, 19, 8, 15, 1, false) + MUX_CFG(DA850, VPIF_CLKIN3, 19, 16, 15, 1, false) + /* VPIF Display */ + MUX_CFG(DA850, VPIF_DOUT0, 17, 4, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT1, 17, 0, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT2, 16, 28, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT3, 16, 24, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT4, 16, 20, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT5, 16, 16, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT6, 16, 12, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT7, 16, 8, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT8, 18, 4, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT9, 18, 0, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT10, 17, 28, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT11, 17, 24, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT12, 17, 20, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT13, 17, 16, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT14, 17, 12, 15, 1, false) + MUX_CFG(DA850, VPIF_DOUT15, 17, 8, 15, 1, false) + MUX_CFG(DA850, VPIF_CLKO2, 19, 12, 15, 1, false) + MUX_CFG(DA850, VPIF_CLKO3, 19, 20, 15, 1, false) #endif }; -const short da850_i2c0_pins[] __initdata = { +const short da850_i2c0_pins[] __initconst = { DA850_I2C0_SDA, DA850_I2C0_SCL, -1 }; -const short da850_i2c1_pins[] __initdata = { +const short da850_i2c1_pins[] __initconst = { DA850_I2C1_SCL, DA850_I2C1_SDA, -1 }; -const short da850_lcdcntl_pins[] __initdata = { +const short da850_lcdcntl_pins[] __initconst = { DA850_LCD_D_0, DA850_LCD_D_1, DA850_LCD_D_2, DA850_LCD_D_3, DA850_LCD_D_4, DA850_LCD_D_5, DA850_LCD_D_6, DA850_LCD_D_7, DA850_LCD_D_8, DA850_LCD_D_9, DA850_LCD_D_10, DA850_LCD_D_11, @@ -595,6 +643,26 @@ const short da850_lcdcntl_pins[] __initdata = { -1 }; +const short da850_vpif_capture_pins[] __initdata = { + DA850_VPIF_DIN0, DA850_VPIF_DIN1, DA850_VPIF_DIN2, DA850_VPIF_DIN3, + DA850_VPIF_DIN4, DA850_VPIF_DIN5, DA850_VPIF_DIN6, DA850_VPIF_DIN7, + DA850_VPIF_DIN8, DA850_VPIF_DIN9, DA850_VPIF_DIN10, DA850_VPIF_DIN11, + DA850_VPIF_DIN12, DA850_VPIF_DIN13, DA850_VPIF_DIN14, DA850_VPIF_DIN15, + DA850_VPIF_CLKIN0, DA850_VPIF_CLKIN1, DA850_VPIF_CLKIN2, + DA850_VPIF_CLKIN3, + -1 +}; + +const short da850_vpif_display_pins[] __initdata = { + DA850_VPIF_DOUT0, DA850_VPIF_DOUT1, DA850_VPIF_DOUT2, DA850_VPIF_DOUT3, + DA850_VPIF_DOUT4, DA850_VPIF_DOUT5, DA850_VPIF_DOUT6, DA850_VPIF_DOUT7, + DA850_VPIF_DOUT8, DA850_VPIF_DOUT9, DA850_VPIF_DOUT10, + DA850_VPIF_DOUT11, DA850_VPIF_DOUT12, DA850_VPIF_DOUT13, + DA850_VPIF_DOUT14, DA850_VPIF_DOUT15, DA850_VPIF_CLKO2, + DA850_VPIF_CLKO3, + -1 +}; + /* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */ static u8 da850_default_priorities[DA850_N_CP_INTC_IRQ] = { [IRQ_DA8XX_COMMTX] = 7, @@ -939,7 +1007,7 @@ static struct platform_device da850_cpufreq_device = { unsigned int da850_max_speed = 300000; -int __init da850_register_cpufreq(char *async_clk) +int da850_register_cpufreq(char *async_clk) { int i; @@ -1064,6 +1132,90 @@ no_ddrpll_mem: return ret; } +/* VPIF resource, platform data */ +static u64 da850_vpif_dma_mask = DMA_BIT_MASK(32); + +static struct resource da850_vpif_resource[] = { + { + .start = DA8XX_VPIF_BASE, + .end = DA8XX_VPIF_BASE + 0xfff, + .flags = IORESOURCE_MEM, + } +}; + +static struct platform_device da850_vpif_dev = { + .name = "vpif", + .id = -1, + .dev = { + .dma_mask = &da850_vpif_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = da850_vpif_resource, + .num_resources = ARRAY_SIZE(da850_vpif_resource), +}; + +static struct resource da850_vpif_display_resource[] = { + { + .start = IRQ_DA850_VPIFINT, + .end = IRQ_DA850_VPIFINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da850_vpif_display_dev = { + .name = "vpif_display", + .id = -1, + .dev = { + .dma_mask = &da850_vpif_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = da850_vpif_display_resource, + .num_resources = ARRAY_SIZE(da850_vpif_display_resource), +}; + +static struct resource da850_vpif_capture_resource[] = { + { + .start = IRQ_DA850_VPIFINT, + .end = IRQ_DA850_VPIFINT, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_DA850_VPIFINT, + .end = IRQ_DA850_VPIFINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device da850_vpif_capture_dev = { + .name = "vpif_capture", + .id = -1, + .dev = { + .dma_mask = &da850_vpif_dma_mask, + .coherent_dma_mask = DMA_BIT_MASK(32), + }, + .resource = da850_vpif_capture_resource, + .num_resources = ARRAY_SIZE(da850_vpif_capture_resource), +}; + +int __init da850_register_vpif(void) +{ + return platform_device_register(&da850_vpif_dev); +} + +int __init da850_register_vpif_display(struct vpif_display_config + *display_config) +{ + da850_vpif_display_dev.dev.platform_data = display_config; + return platform_device_register(&da850_vpif_display_dev); +} + +int __init da850_register_vpif_capture(struct vpif_capture_config + *capture_config) +{ + da850_vpif_capture_dev.dev.platform_data = capture_config; + return platform_device_register(&da850_vpif_capture_dev); +} + static struct davinci_soc_info davinci_soc_info_da850 = { .io_desc = da850_io_desc, .io_desc_num = ARRAY_SIZE(da850_io_desc), diff --git a/arch/arm/mach-davinci/davinci.h b/arch/arm/mach-davinci/davinci.h index a37fc44e29bc05b2c52d796bf4ace69cb6800601..12d544befcfa36554d70931fcf0048e01ab212bd 100644 --- a/arch/arm/mach-davinci/davinci.h +++ b/arch/arm/mach-davinci/davinci.h @@ -22,10 +22,10 @@ #include #include #include - -#include +#include #include #include +#include #include #include diff --git a/arch/arm/mach-davinci/devices-da8xx.c b/arch/arm/mach-davinci/devices-da8xx.c index 783eab6845c4ea6d56e0a9575b9e9cb89e5eaf84..bd2f72b414bce03c87b4921e2962ff709cf815e4 100644 --- a/arch/arm/mach-davinci/devices-da8xx.c +++ b/arch/arm/mach-davinci/devices-da8xx.c @@ -24,6 +24,7 @@ #include #include "clock.h" +#include "asp.h" #define DA8XX_TPCC_BASE 0x01c00000 #define DA8XX_TPTC0_BASE 0x01c08000 @@ -505,15 +506,8 @@ static struct platform_device da850_mcasp_device = { .resource = da850_mcasp_resources, }; -static struct platform_device davinci_pcm_device = { - .name = "davinci-pcm-audio", - .id = -1, -}; - void __init da8xx_register_mcasp(int id, struct snd_platform_data *pdata) { - platform_device_register(&davinci_pcm_device); - /* DA830/OMAP-L137 has 3 instances of McASP */ if (cpu_is_davinci_da830() && id == 1) { da830_mcasp1_device.dev.platform_data = pdata; diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c index 3a42b6f79aa9b7275c6dfcc27341968a4b70b1e4..4c48a36ee567d6a98b2eb5d0a56ef9b51f2121b0 100644 --- a/arch/arm/mach-davinci/devices.c +++ b/arch/arm/mach-davinci/devices.c @@ -313,16 +313,6 @@ static void davinci_init_wdt(void) /*-------------------------------------------------------------------------*/ -static struct platform_device davinci_pcm_device = { - .name = "davinci-pcm-audio", - .id = -1, -}; - -static void davinci_init_pcm(void) -{ - platform_device_register(&davinci_pcm_device); -} - /*-------------------------------------------------------------------------*/ struct davinci_timer_instance davinci_timer_instance[2] = { @@ -345,7 +335,6 @@ static int __init davinci_init_devices(void) /* please keep these calls, and their implementations above, * in alphabetical order so they're easier to sort through. */ - davinci_init_pcm(); davinci_init_wdt(); return 0; diff --git a/arch/arm/mach-davinci/dm355.c b/arch/arm/mach-davinci/dm355.c index adbde33eca015a640217ed1335671645cd874449..a255434908dbcfebb1a1b8a3a946860db7e9f4bf 100644 --- a/arch/arm/mach-davinci/dm355.c +++ b/arch/arm/mach-davinci/dm355.c @@ -26,13 +26,13 @@ #include #include #include -#include #include #include #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" #define DM355_UART2_BASE (IO_PHYS + 0x206000) diff --git a/arch/arm/mach-davinci/dm365.c b/arch/arm/mach-davinci/dm365.c index 719e22f2a37e42bd4bc11bcf28bc86f629a79adf..b680c832e0ba87758f1f29aeb502109ce2699268 100644 --- a/arch/arm/mach-davinci/dm365.c +++ b/arch/arm/mach-davinci/dm365.c @@ -29,7 +29,6 @@ #include #include #include -#include #include #include #include @@ -37,6 +36,7 @@ #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" #define DM365_REF_FREQ 24000000 /* 24 MHz on the DM365 EVM */ diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c index c8b866657fcbf1a2d240c3711fce4bba1093c775..cd0c8b1e1ecfad4a868b9aae3f6180a1b1794ed1 100644 --- a/arch/arm/mach-davinci/dm644x.c +++ b/arch/arm/mach-davinci/dm644x.c @@ -23,12 +23,12 @@ #include #include #include -#include #include #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" /* * Device specific clocks @@ -701,7 +701,7 @@ static struct resource dm644x_venc_resources[] = { #define DM644X_VPSS_DACCLKEN BIT(4) static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, - unsigned int mode) + unsigned int pclock) { int ret = 0; u32 v = DM644X_VPSS_VENCLKEN; @@ -711,27 +711,18 @@ static int dm644x_venc_setup_clock(enum vpbe_enc_timings_type type, v |= DM644X_VPSS_DACCLKEN; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); break; - case VPBE_ENC_DV_PRESET: - switch (mode) { - case V4L2_DV_480P59_94: - case V4L2_DV_576P50: + case VPBE_ENC_CUSTOM_TIMINGS: + if (pclock <= 27000000) { v |= DM644X_VPSS_MUXSEL_PLL2_MODE | DM644X_VPSS_DACCLKEN; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); - break; - case V4L2_DV_720P60: - case V4L2_DV_1080I60: - case V4L2_DV_1080P30: + } else { /* * For HD, use external clock source since * HD requires higher clock rate */ v |= DM644X_VPSS_MUXSEL_VPBECLK_MODE; writel(v, DAVINCI_SYSMOD_VIRT(SYSMOD_VPSS_CLKCTL)); - break; - default: - ret = -EINVAL; - break; } break; default: diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c index 9eb87c1d1edd1e1deacefc64d240469987e2f0d6..97c0f8e555bd454edb83c4612bf31153816fa9e0 100644 --- a/arch/arm/mach-davinci/dm646x.c +++ b/arch/arm/mach-davinci/dm646x.c @@ -24,12 +24,12 @@ #include #include #include -#include #include #include "davinci.h" #include "clock.h" #include "mux.h" +#include "asp.h" #define DAVINCI_VPIF_BASE (0x01C12000) diff --git a/arch/arm/mach-davinci/include/mach/da8xx.h b/arch/arm/mach-davinci/include/mach/da8xx.h index 33e78ae2a254d3106f97a42dcf68aa2cebc076c2..aaccdc4528fcce2f3110d2d4385dc1c5239ceebb 100644 --- a/arch/arm/mach-davinci/include/mach/da8xx.h +++ b/arch/arm/mach-davinci/include/mach/da8xx.h @@ -16,16 +16,19 @@ #include #include #include +#include +#include #include #include -#include #include #include #include #include #include +#include + extern void __iomem *da8xx_syscfg0_base; extern void __iomem *da8xx_syscfg1_base; @@ -63,6 +66,7 @@ extern unsigned int da850_max_speed; #define DA8XX_PLL0_BASE 0x01c11000 #define DA8XX_TIMER64P0_BASE 0x01c20000 #define DA8XX_TIMER64P1_BASE 0x01c21000 +#define DA8XX_VPIF_BASE 0x01e17000 #define DA8XX_GPIO_BASE 0x01e26000 #define DA8XX_PSC1_BASE 0x01e27000 #define DA8XX_AEMIF_CS2_BASE 0x60000000 @@ -92,6 +96,11 @@ int da8xx_register_cpuidle(void); void __iomem * __init da8xx_get_mem_ctlr(void); int da850_register_pm(struct platform_device *pdev); int __init da850_register_sata(unsigned long refclkpn); +int __init da850_register_vpif(void); +int __init da850_register_vpif_display + (struct vpif_display_config *display_config); +int __init da850_register_vpif_capture + (struct vpif_capture_config *capture_config); void da8xx_restart(char mode, const char *cmd); extern struct platform_device da8xx_serial_device; @@ -126,6 +135,8 @@ extern const short da830_ecap1_pins[]; extern const short da830_ecap2_pins[]; extern const short da830_eqep0_pins[]; extern const short da830_eqep1_pins[]; +extern const short da850_vpif_capture_pins[]; +extern const short da850_vpif_display_pins[]; extern const short da850_i2c0_pins[]; extern const short da850_i2c1_pins[]; diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h index a7e92fca32e6719457167f1c2f9efbdd2921df73..9e95b8a1edb62964cc473c1947bc61ebc6ca0402 100644 --- a/arch/arm/mach-davinci/include/mach/mux.h +++ b/arch/arm/mach-davinci/include/mach/mux.h @@ -928,6 +928,48 @@ enum davinci_da850_index { DA850_GPIO6_10, DA850_GPIO6_13, DA850_RTC_ALARM, + + /* VPIF Capture */ + DA850_VPIF_DIN0, + DA850_VPIF_DIN1, + DA850_VPIF_DIN2, + DA850_VPIF_DIN3, + DA850_VPIF_DIN4, + DA850_VPIF_DIN5, + DA850_VPIF_DIN6, + DA850_VPIF_DIN7, + DA850_VPIF_DIN8, + DA850_VPIF_DIN9, + DA850_VPIF_DIN10, + DA850_VPIF_DIN11, + DA850_VPIF_DIN12, + DA850_VPIF_DIN13, + DA850_VPIF_DIN14, + DA850_VPIF_DIN15, + DA850_VPIF_CLKIN0, + DA850_VPIF_CLKIN1, + DA850_VPIF_CLKIN2, + DA850_VPIF_CLKIN3, + + /* VPIF Display */ + DA850_VPIF_DOUT0, + DA850_VPIF_DOUT1, + DA850_VPIF_DOUT2, + DA850_VPIF_DOUT3, + DA850_VPIF_DOUT4, + DA850_VPIF_DOUT5, + DA850_VPIF_DOUT6, + DA850_VPIF_DOUT7, + DA850_VPIF_DOUT8, + DA850_VPIF_DOUT9, + DA850_VPIF_DOUT10, + DA850_VPIF_DOUT11, + DA850_VPIF_DOUT12, + DA850_VPIF_DOUT13, + DA850_VPIF_DOUT14, + DA850_VPIF_DOUT15, + DA850_VPIF_CLKO2, + DA850_VPIF_CLKO3, }; enum davinci_tnetv107x_index { diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h index 405318e35bf63f8422dc5263088d2a9cbe64a212..40a0027838e81601427fbb2bc7ff04311e5300ad 100644 --- a/arch/arm/mach-davinci/include/mach/psc.h +++ b/arch/arm/mach-davinci/include/mach/psc.h @@ -166,6 +166,7 @@ #define DA830_LPSC1_McASP1 8 #define DA850_LPSC1_SATA 8 #define DA830_LPSC1_McASP2 9 +#define DA850_LPSC1_VPIF 9 #define DA8XX_LPSC1_SPI1 10 #define DA8XX_LPSC1_I2C 11 #define DA8XX_LPSC1_UART1 12 diff --git a/arch/arm/mach-dove/Kconfig b/arch/arm/mach-dove/Kconfig index dd937c526a458980eac6ac03b352f8f548f070dd..00154e74ce6b11d892840315ddedd9366b73e86d 100644 --- a/arch/arm/mach-dove/Kconfig +++ b/arch/arm/mach-dove/Kconfig @@ -15,6 +15,13 @@ config MACH_CM_A510 Say 'Y' here if you want your kernel to support the CompuLab CM-A510 Board. +config MACH_DOVE_DT + bool "Marvell Dove Flattened Device Tree" + select USE_OF + help + Say 'Y' here if you want your kernel to support the + Marvell Dove using flattened device tree. + endmenu endif diff --git a/arch/arm/mach-dove/Makefile b/arch/arm/mach-dove/Makefile index fa0f018560600b0e4a3d335240e805db4b482d7c..5e683baf96cffc53e0ac8410be6e7505d4fb8557 100644 --- a/arch/arm/mach-dove/Makefile +++ b/arch/arm/mach-dove/Makefile @@ -1,4 +1,4 @@ -obj-y += common.o addr-map.o irq.o pcie.o mpp.o - +obj-y += common.o addr-map.o irq.o mpp.o +obj-$(CONFIG_PCI) += pcie.o obj-$(CONFIG_MACH_DOVE_DB) += dove-db-setup.o obj-$(CONFIG_MACH_CM_A510) += cm-a510.o diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 950ad9533d19ea88ab7c9651f80cfcb9c0a04887..b37bef1d5ffad9828f6734eb9a50262327ea950d 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -16,6 +16,8 @@ #include #include #include +#include +#include #include #include #include @@ -24,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -33,19 +36,17 @@ #include #include "common.h" -static int get_tclk(void); - /***************************************************************************** * I/O Address Mapping ****************************************************************************/ static struct map_desc dove_io_desc[] __initdata = { { - .virtual = DOVE_SB_REGS_VIRT_BASE, + .virtual = (unsigned long) DOVE_SB_REGS_VIRT_BASE, .pfn = __phys_to_pfn(DOVE_SB_REGS_PHYS_BASE), .length = DOVE_SB_REGS_SIZE, .type = MT_DEVICE, }, { - .virtual = DOVE_NB_REGS_VIRT_BASE, + .virtual = (unsigned long) DOVE_NB_REGS_VIRT_BASE, .pfn = __phys_to_pfn(DOVE_NB_REGS_PHYS_BASE), .length = DOVE_NB_REGS_SIZE, .type = MT_DEVICE, @@ -60,14 +61,69 @@ void __init dove_map_io(void) /***************************************************************************** * CLK tree ****************************************************************************/ +static int dove_tclk; + +static DEFINE_SPINLOCK(gating_lock); static struct clk *tclk; -static void __init clk_init(void) +static struct clk __init *dove_register_gate(const char *name, + const char *parent, u8 bit_idx) { - tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT, - get_tclk()); + return clk_register_gate(NULL, name, parent, 0, + (void __iomem *)CLOCK_GATING_CONTROL, + bit_idx, 0, &gating_lock); +} + +static void __init dove_clk_init(void) +{ + struct clk *usb0, *usb1, *sata, *pex0, *pex1, *sdio0, *sdio1; + struct clk *nand, *camera, *i2s0, *i2s1, *crypto, *ac97, *pdma; + struct clk *xor0, *xor1, *ge, *gephy; - orion_clkdev_init(tclk); + tclk = clk_register_fixed_rate(NULL, "tclk", NULL, CLK_IS_ROOT, + dove_tclk); + + usb0 = dove_register_gate("usb0", "tclk", CLOCK_GATING_BIT_USB0); + usb1 = dove_register_gate("usb1", "tclk", CLOCK_GATING_BIT_USB1); + sata = dove_register_gate("sata", "tclk", CLOCK_GATING_BIT_SATA); + pex0 = dove_register_gate("pex0", "tclk", CLOCK_GATING_BIT_PCIE0); + pex1 = dove_register_gate("pex1", "tclk", CLOCK_GATING_BIT_PCIE1); + sdio0 = dove_register_gate("sdio0", "tclk", CLOCK_GATING_BIT_SDIO0); + sdio1 = dove_register_gate("sdio1", "tclk", CLOCK_GATING_BIT_SDIO1); + nand = dove_register_gate("nand", "tclk", CLOCK_GATING_BIT_NAND); + camera = dove_register_gate("camera", "tclk", CLOCK_GATING_BIT_CAMERA); + i2s0 = dove_register_gate("i2s0", "tclk", CLOCK_GATING_BIT_I2S0); + i2s1 = dove_register_gate("i2s1", "tclk", CLOCK_GATING_BIT_I2S1); + crypto = dove_register_gate("crypto", "tclk", CLOCK_GATING_BIT_CRYPTO); + ac97 = dove_register_gate("ac97", "tclk", CLOCK_GATING_BIT_AC97); + pdma = dove_register_gate("pdma", "tclk", CLOCK_GATING_BIT_PDMA); + xor0 = dove_register_gate("xor0", "tclk", CLOCK_GATING_BIT_XOR0); + xor1 = dove_register_gate("xor1", "tclk", CLOCK_GATING_BIT_XOR1); + gephy = dove_register_gate("gephy", "tclk", CLOCK_GATING_BIT_GIGA_PHY); + ge = dove_register_gate("ge", "gephy", CLOCK_GATING_BIT_GBE); + + orion_clkdev_add(NULL, "orion_spi.0", tclk); + orion_clkdev_add(NULL, "orion_spi.1", tclk); + orion_clkdev_add(NULL, "orion_wdt", tclk); + orion_clkdev_add(NULL, "mv64xxx_i2c.0", tclk); + + orion_clkdev_add(NULL, "orion-ehci.0", usb0); + orion_clkdev_add(NULL, "orion-ehci.1", usb1); + orion_clkdev_add(NULL, "mv643xx_eth.0", ge); + orion_clkdev_add("0", "sata_mv.0", sata); + orion_clkdev_add("0", "pcie", pex0); + orion_clkdev_add("1", "pcie", pex1); + orion_clkdev_add(NULL, "sdhci-dove.0", sdio0); + orion_clkdev_add(NULL, "sdhci-dove.1", sdio1); + orion_clkdev_add(NULL, "orion_nand", nand); + orion_clkdev_add(NULL, "cafe1000-ccic.0", camera); + orion_clkdev_add(NULL, "kirkwood-i2s.0", i2s0); + orion_clkdev_add(NULL, "kirkwood-i2s.1", i2s1); + orion_clkdev_add(NULL, "mv_crypto", crypto); + orion_clkdev_add(NULL, "dove-ac97", ac97); + orion_clkdev_add(NULL, "dove-pdma", pdma); + orion_clkdev_add(NULL, "mv_xor_shared.0", xor0); + orion_clkdev_add(NULL, "mv_xor_shared.1", xor1); } /***************************************************************************** @@ -178,22 +234,31 @@ void __init dove_init_early(void) orion_time_set_base(TIMER_VIRT_BASE); } -static int get_tclk(void) +static int __init dove_find_tclk(void) { - /* use DOVE_RESET_SAMPLE_HI/LO to detect tclk */ return 166666667; } static void __init dove_timer_init(void) { + dove_tclk = dove_find_tclk(); orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, - IRQ_DOVE_BRIDGE, get_tclk()); + IRQ_DOVE_BRIDGE, dove_tclk); } struct sys_timer dove_timer = { .init = dove_timer_init, }; +/***************************************************************************** + * Cryptographic Engines and Security Accelerator (CESA) + ****************************************************************************/ +void __init dove_crypto_init(void) +{ + orion_crypto_init(DOVE_CRYPT_PHYS_BASE, DOVE_CESA_PHYS_BASE, + DOVE_CESA_SIZE, IRQ_DOVE_CRYPTO); +} + /***************************************************************************** * XOR 0 ****************************************************************************/ @@ -275,8 +340,8 @@ void __init dove_sdio1_init(void) void __init dove_init(void) { - printk(KERN_INFO "Dove 88AP510 SoC, "); - printk(KERN_INFO "TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000); + pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", + (dove_tclk + 499999) / 1000000); #ifdef CONFIG_CACHE_TAUROS2 tauros2_init(0); @@ -284,7 +349,7 @@ void __init dove_init(void) dove_setup_cpu_mbus(); /* Setup root of clk tree */ - clk_init(); + dove_clk_init(); /* internal devices that every board has */ dove_rtc_init(); @@ -307,3 +372,67 @@ void dove_restart(char mode, const char *cmd) while (1) ; } + +#if defined(CONFIG_MACH_DOVE_DT) +/* + * Auxdata required until real OF clock provider + */ +struct of_dev_auxdata dove_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1010600, "orion_spi.0", NULL), + OF_DEV_AUXDATA("marvell,orion-spi", 0xf1014600, "orion_spi.1", NULL), + OF_DEV_AUXDATA("marvell,orion-wdt", 0xf1020300, "orion_wdt", NULL), + OF_DEV_AUXDATA("marvell,mv64xxx-i2c", 0xf1011000, "mv64xxx_i2c.0", + NULL), + OF_DEV_AUXDATA("marvell,orion-sata", 0xf10a0000, "sata_mv.0", NULL), + OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1092000, "sdhci-dove.0", NULL), + OF_DEV_AUXDATA("marvell,dove-sdhci", 0xf1090000, "sdhci-dove.1", NULL), + {}, +}; + +static struct mv643xx_eth_platform_data dove_dt_ge00_data = { + .phy_addr = MV643XX_ETH_PHY_ADDR_DEFAULT, +}; + +static void __init dove_dt_init(void) +{ + pr_info("Dove 88AP510 SoC, TCLK = %d MHz.\n", + (dove_tclk + 499999) / 1000000); + +#ifdef CONFIG_CACHE_TAUROS2 + tauros2_init(); +#endif + dove_setup_cpu_mbus(); + + /* Setup root of clk tree */ + dove_clk_init(); + + /* Internal devices not ported to DT yet */ + dove_rtc_init(); + dove_xor0_init(); + dove_xor1_init(); + + dove_ge00_init(&dove_dt_ge00_data); + dove_ehci0_init(); + dove_ehci1_init(); + dove_pcie_init(1, 1); + dove_crypto_init(); + + of_platform_populate(NULL, of_default_bus_match_table, + dove_auxdata_lookup, NULL); +} + +static const char * const dove_dt_board_compat[] = { + "marvell,dove", + NULL +}; + +DT_MACHINE_START(DOVE_DT, "Marvell Dove (Flattened Device Tree)") + .map_io = dove_map_io, + .init_early = dove_init_early, + .init_irq = orion_dt_init_irq, + .timer = &dove_timer, + .init_machine = dove_dt_init, + .restart = dove_restart, + .dt_compat = dove_dt_board_compat, +MACHINE_END +#endif diff --git a/arch/arm/mach-dove/common.h b/arch/arm/mach-dove/common.h index 6432a3ba864b7058ecc81dcc3df5b90f897bb4d5..1a233404b7355990fd1158da7e598e8f3125c541 100644 --- a/arch/arm/mach-dove/common.h +++ b/arch/arm/mach-dove/common.h @@ -26,7 +26,11 @@ void dove_init_irq(void); void dove_setup_cpu_mbus(void); void dove_ge00_init(struct mv643xx_eth_platform_data *eth_data); void dove_sata_init(struct mv_sata_platform_data *sata_data); +#ifdef CONFIG_PCI void dove_pcie_init(int init_port0, int init_port1); +#else +static inline void dove_pcie_init(int init_port0, int init_port1) { } +#endif void dove_ehci0_init(void); void dove_ehci1_init(void); void dove_uart0_init(void); diff --git a/arch/arm/mach-dove/include/mach/bridge-regs.h b/arch/arm/mach-dove/include/mach/bridge-regs.h index f953bb54aa9d31d590791d97aaaf770aaaecfd93..99f259e8cf33133b73f2b9712746cf7ade80fcbb 100644 --- a/arch/arm/mach-dove/include/mach/bridge-regs.h +++ b/arch/arm/mach-dove/include/mach/bridge-regs.h @@ -13,22 +13,22 @@ #include -#define CPU_CONFIG (BRIDGE_VIRT_BASE | 0x0000) +#define CPU_CONFIG (BRIDGE_VIRT_BASE + 0x0000) -#define CPU_CONTROL (BRIDGE_VIRT_BASE | 0x0104) +#define CPU_CONTROL (BRIDGE_VIRT_BASE + 0x0104) #define CPU_CTRL_PCIE0_LINK 0x00000001 #define CPU_RESET 0x00000002 #define CPU_CTRL_PCIE1_LINK 0x00000008 -#define RSTOUTn_MASK (BRIDGE_VIRT_BASE | 0x0108) +#define RSTOUTn_MASK (BRIDGE_VIRT_BASE + 0x0108) #define SOFT_RESET_OUT_EN 0x00000004 -#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE | 0x010c) +#define SYSTEM_SOFT_RESET (BRIDGE_VIRT_BASE + 0x010c) #define SOFT_RESET 0x00000001 #define BRIDGE_INT_TIMER1_CLR (~0x0004) -#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0200) +#define IRQ_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0200) #define IRQ_CAUSE_LOW_OFF 0x0000 #define IRQ_MASK_LOW_OFF 0x0004 #define FIQ_MASK_LOW_OFF 0x0008 @@ -47,9 +47,9 @@ #define ENDPOINT_MASK_HIGH (IRQ_VIRT_BASE + ENDPOINT_MASK_HIGH_OFF) #define PCIE_INTERRUPT_MASK (IRQ_VIRT_BASE + PCIE_INTERRUPT_MASK_OFF) -#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE | 0x011c) +#define POWER_MANAGEMENT (BRIDGE_VIRT_BASE + 0x011c) -#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300) -#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300) +#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE + 0x0300) +#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE + 0x0300) #endif diff --git a/arch/arm/mach-dove/include/mach/dove.h b/arch/arm/mach-dove/include/mach/dove.h index c91e3004a47bc01f60f470be1d38904b94c13ca6..661725e3115a5d37433aabb93cbf0be37a5049a8 100644 --- a/arch/arm/mach-dove/include/mach/dove.h +++ b/arch/arm/mach-dove/include/mach/dove.h @@ -25,7 +25,7 @@ */ #define DOVE_CESA_PHYS_BASE 0xc8000000 -#define DOVE_CESA_VIRT_BASE 0xfdb00000 +#define DOVE_CESA_VIRT_BASE IOMEM(0xfdb00000) #define DOVE_CESA_SIZE SZ_1M #define DOVE_PCIE0_MEM_PHYS_BASE 0xe0000000 @@ -38,15 +38,15 @@ #define DOVE_BOOTROM_SIZE SZ_128M #define DOVE_SCRATCHPAD_PHYS_BASE 0xf0000000 -#define DOVE_SCRATCHPAD_VIRT_BASE 0xfdd00000 +#define DOVE_SCRATCHPAD_VIRT_BASE IOMEM(0xfdd00000) #define DOVE_SCRATCHPAD_SIZE SZ_1M #define DOVE_SB_REGS_PHYS_BASE 0xf1000000 -#define DOVE_SB_REGS_VIRT_BASE 0xfde00000 +#define DOVE_SB_REGS_VIRT_BASE IOMEM(0xfde00000) #define DOVE_SB_REGS_SIZE SZ_8M #define DOVE_NB_REGS_PHYS_BASE 0xf1800000 -#define DOVE_NB_REGS_VIRT_BASE 0xfe600000 +#define DOVE_NB_REGS_VIRT_BASE IOMEM(0xfe600000) #define DOVE_NB_REGS_SIZE SZ_8M #define DOVE_PCIE0_IO_PHYS_BASE 0xf2000000 @@ -62,75 +62,75 @@ */ /* SPI, I2C, UART */ -#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x11000) -#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12000) -#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12000) -#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12100) -#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12100) -#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12200) -#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12200) -#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x12300) -#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x12300) -#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x10600) -#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x14600) +#define DOVE_I2C_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x11000) +#define DOVE_UART0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12000) +#define DOVE_UART0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12000) +#define DOVE_UART1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12100) +#define DOVE_UART1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12100) +#define DOVE_UART2_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12200) +#define DOVE_UART2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12200) +#define DOVE_UART3_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x12300) +#define DOVE_UART3_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x12300) +#define DOVE_SPI0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x10600) +#define DOVE_SPI1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x14600) /* North-South Bridge */ -#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x20000) -#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x20000) +#define BRIDGE_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x20000) +#define BRIDGE_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x20000) /* Cryptographic Engine */ -#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x30000) +#define DOVE_CRYPT_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x30000) /* PCIe 0 */ -#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x40000) +#define DOVE_PCIE0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x40000) /* USB */ -#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x50000) -#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x51000) +#define DOVE_USB0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x50000) +#define DOVE_USB1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x51000) /* XOR 0 Engine */ -#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60800) -#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60800) -#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60A00) -#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60A00) +#define DOVE_XOR0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60800) +#define DOVE_XOR0_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60800) +#define DOVE_XOR0_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60A00) +#define DOVE_XOR0_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60A00) /* XOR 1 Engine */ -#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60900) -#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60900) -#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x60B00) -#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x60B00) +#define DOVE_XOR1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60900) +#define DOVE_XOR1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60900) +#define DOVE_XOR1_HIGH_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x60B00) +#define DOVE_XOR1_HIGH_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x60B00) /* Gigabit Ethernet */ -#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x70000) +#define DOVE_GE00_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x70000) /* PCIe 1 */ -#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0x80000) +#define DOVE_PCIE1_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0x80000) /* CAFE */ -#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x92000) -#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x90000) -#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x94000) -#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0x98000) +#define DOVE_SDIO0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x92000) +#define DOVE_SDIO1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x90000) +#define DOVE_CAM_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x94000) +#define DOVE_CAFE_WIN_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0x98000) /* SATA */ -#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xa0000) +#define DOVE_SATA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xa0000) /* I2S/SPDIF */ -#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb0000) -#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xb4000) +#define DOVE_AUD0_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb0000) +#define DOVE_AUD1_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xb4000) /* NAND Flash Controller */ -#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xc0000) +#define DOVE_NFC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xc0000) /* MPP, GPIO, Reset Sampling */ -#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0200) +#define DOVE_MPP_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0200) #define DOVE_PMU_MPP_GENERAL_CTRL (DOVE_MPP_VIRT_BASE + 0x10) -#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE | 0x014) -#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE | 0x018) -#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0400) -#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0420) -#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe8400) -#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe803c) +#define DOVE_RESET_SAMPLE_LO (DOVE_MPP_VIRT_BASE + 0x014) +#define DOVE_RESET_SAMPLE_HI (DOVE_MPP_VIRT_BASE + 0x018) +#define DOVE_GPIO_LO_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0400) +#define DOVE_GPIO_HI_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0420) +#define DOVE_GPIO2_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe8400) +#define DOVE_MPP_GENERAL_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe803c) #define DOVE_AU1_SPDIFO_GPIO_EN (1 << 1) #define DOVE_NAND_GPIO_EN (1 << 0) #define DOVE_MPP_CTRL4_VIRT_BASE (DOVE_GPIO_LO_VIRT_BASE + 0x40) @@ -142,44 +142,44 @@ #define DOVE_SD0_GPIO_SEL (1 << 0) /* Power Management */ -#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xd0000) +#define DOVE_PMU_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xd0000) #define DOVE_PMU_SIG_CTRL (DOVE_PMU_VIRT_BASE + 0x802c) /* Real Time Clock */ -#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xd8500) +#define DOVE_RTC_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xd8500) /* AC97 */ -#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe0000) -#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe0000) +#define DOVE_AC97_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe0000) +#define DOVE_AC97_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe0000) /* Peripheral DMA */ -#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xe4000) -#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE | 0xe4000) +#define DOVE_PDMA_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xe4000) +#define DOVE_PDMA_VIRT_BASE (DOVE_SB_REGS_VIRT_BASE + 0xe4000) -#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE | 0xe802C) +#define DOVE_GLOBAL_CONFIG_1 (DOVE_SB_REGS_VIRT_BASE + 0xe802C) #define DOVE_TWSI_ENABLE_OPTION1 (1 << 7) -#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE | 0xe8030) +#define DOVE_GLOBAL_CONFIG_2 (DOVE_SB_REGS_VIRT_BASE + 0xe8030) #define DOVE_TWSI_ENABLE_OPTION2 (1 << 20) #define DOVE_TWSI_ENABLE_OPTION3 (1 << 21) #define DOVE_TWSI_OPTION3_GPIO (1 << 22) -#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE | 0xec000) -#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE | 0xe8034) +#define DOVE_SSP_PHYS_BASE (DOVE_SB_REGS_PHYS_BASE + 0xec000) +#define DOVE_SSP_CTRL_STATUS_1 (DOVE_SB_REGS_VIRT_BASE + 0xe8034) #define DOVE_SSP_ON_AU1 (1 << 0) #define DOVE_SSP_CLOCK_ENABLE (1 << 1) #define DOVE_SSP_BPB_CLOCK_SRC_SSP (1 << 11) /* Memory Controller */ -#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE | 0x00000) +#define DOVE_MC_VIRT_BASE (DOVE_NB_REGS_VIRT_BASE + 0x00000) /* LCD Controller */ -#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000) -#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x20000) -#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x10000) -#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x30000) +#define DOVE_LCD_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000) +#define DOVE_LCD1_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x20000) +#define DOVE_LCD2_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x10000) +#define DOVE_LCD_DCON_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x30000) /* Graphic Engine */ -#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x40000) +#define DOVE_GPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x40000) /* Video Engine */ -#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE | 0x400000) +#define DOVE_VPU_PHYS_BASE (DOVE_NB_REGS_PHYS_BASE + 0x400000) #endif diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h index 3ad9f946a9e8f8ef416aee2c4e8f5f29eb757c8c..7bcd0dfce4b1ce51b8b0e1bfc96ebcf9a0167d12 100644 --- a/arch/arm/mach-dove/include/mach/pm.h +++ b/arch/arm/mach-dove/include/mach/pm.h @@ -13,24 +13,42 @@ #include #define CLOCK_GATING_CONTROL (DOVE_PMU_VIRT_BASE + 0x38) -#define CLOCK_GATING_USB0_MASK (1 << 0) -#define CLOCK_GATING_USB1_MASK (1 << 1) -#define CLOCK_GATING_GBE_MASK (1 << 2) -#define CLOCK_GATING_SATA_MASK (1 << 3) -#define CLOCK_GATING_PCIE0_MASK (1 << 4) -#define CLOCK_GATING_PCIE1_MASK (1 << 5) -#define CLOCK_GATING_SDIO0_MASK (1 << 8) -#define CLOCK_GATING_SDIO1_MASK (1 << 9) -#define CLOCK_GATING_NAND_MASK (1 << 10) -#define CLOCK_GATING_CAMERA_MASK (1 << 11) -#define CLOCK_GATING_I2S0_MASK (1 << 12) -#define CLOCK_GATING_I2S1_MASK (1 << 13) -#define CLOCK_GATING_CRYPTO_MASK (1 << 15) -#define CLOCK_GATING_AC97_MASK (1 << 21) -#define CLOCK_GATING_PDMA_MASK (1 << 22) -#define CLOCK_GATING_XOR0_MASK (1 << 23) -#define CLOCK_GATING_XOR1_MASK (1 << 24) -#define CLOCK_GATING_GIGA_PHY_MASK (1 << 30) +#define CLOCK_GATING_BIT_USB0 0 +#define CLOCK_GATING_BIT_USB1 1 +#define CLOCK_GATING_BIT_GBE 2 +#define CLOCK_GATING_BIT_SATA 3 +#define CLOCK_GATING_BIT_PCIE0 4 +#define CLOCK_GATING_BIT_PCIE1 5 +#define CLOCK_GATING_BIT_SDIO0 8 +#define CLOCK_GATING_BIT_SDIO1 9 +#define CLOCK_GATING_BIT_NAND 10 +#define CLOCK_GATING_BIT_CAMERA 11 +#define CLOCK_GATING_BIT_I2S0 12 +#define CLOCK_GATING_BIT_I2S1 13 +#define CLOCK_GATING_BIT_CRYPTO 15 +#define CLOCK_GATING_BIT_AC97 21 +#define CLOCK_GATING_BIT_PDMA 22 +#define CLOCK_GATING_BIT_XOR0 23 +#define CLOCK_GATING_BIT_XOR1 24 +#define CLOCK_GATING_BIT_GIGA_PHY 30 +#define CLOCK_GATING_USB0_MASK (1 << CLOCK_GATING_BIT_USB0) +#define CLOCK_GATING_USB1_MASK (1 << CLOCK_GATING_BIT_USB1) +#define CLOCK_GATING_GBE_MASK (1 << CLOCK_GATING_BIT_GBE) +#define CLOCK_GATING_SATA_MASK (1 << CLOCK_GATING_BIT_SATA) +#define CLOCK_GATING_PCIE0_MASK (1 << CLOCK_GATING_BIT_PCIE0) +#define CLOCK_GATING_PCIE1_MASK (1 << CLOCK_GATING_BIT_PCIE1) +#define CLOCK_GATING_SDIO0_MASK (1 << CLOCK_GATING_BIT_SDIO0) +#define CLOCK_GATING_SDIO1_MASK (1 << CLOCK_GATING_BIT_SDIO1) +#define CLOCK_GATING_NAND_MASK (1 << CLOCK_GATING_BIT_NAND) +#define CLOCK_GATING_CAMERA_MASK (1 << CLOCK_GATING_BIT_CAMERA) +#define CLOCK_GATING_I2S0_MASK (1 << CLOCK_GATING_BIT_I2S0) +#define CLOCK_GATING_I2S1_MASK (1 << CLOCK_GATING_BIT_I2S1) +#define CLOCK_GATING_CRYPTO_MASK (1 << CLOCK_GATING_BIT_CRYPTO) +#define CLOCK_GATING_AC97_MASK (1 << CLOCK_GATING_BIT_AC97) +#define CLOCK_GATING_PDMA_MASK (1 << CLOCK_GATING_BIT_PDMA) +#define CLOCK_GATING_XOR0_MASK (1 << CLOCK_GATING_BIT_XOR0) +#define CLOCK_GATING_XOR1_MASK (1 << CLOCK_GATING_BIT_XOR1) +#define CLOCK_GATING_GIGA_PHY_MASK (1 << CLOCK_GATING_BIT_GIGA_PHY) #define PMU_INTERRUPT_CAUSE (DOVE_PMU_VIRT_BASE + 0x50) #define PMU_INTERRUPT_MASK (DOVE_PMU_VIRT_BASE + 0x54) diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 186357f3b4db54e2b4141f149ec1920628b35d66..087711524e8a29d1e0d2de7c919bd705976ddbd7 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -100,19 +100,19 @@ void __init dove_init_irq(void) { int i; - orion_irq_init(0, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF)); - orion_irq_init(32, (void __iomem *)(IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF)); + orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF); + orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF); /* * Initialize gpiolib for GPIOs 0-71. */ - orion_gpio_init(NULL, 0, 32, (void __iomem *)DOVE_GPIO_LO_VIRT_BASE, 0, + orion_gpio_init(NULL, 0, 32, DOVE_GPIO_LO_VIRT_BASE, 0, IRQ_DOVE_GPIO_START, gpio0_irqs); - orion_gpio_init(NULL, 32, 32, (void __iomem *)DOVE_GPIO_HI_VIRT_BASE, 0, + orion_gpio_init(NULL, 32, 32, DOVE_GPIO_HI_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 32, gpio1_irqs); - orion_gpio_init(NULL, 64, 8, (void __iomem *)DOVE_GPIO2_VIRT_BASE, 0, + orion_gpio_init(NULL, 64, 8, DOVE_GPIO2_VIRT_BASE, 0, IRQ_DOVE_GPIO_START + 64, gpio2_irqs); /* diff --git a/arch/arm/mach-dove/pcie.c b/arch/arm/mach-dove/pcie.c index 355332d502cb538cdec53e796bdf70b993f381ae..bb15b26041cb7d6bd13a5ca4d5532cb66632e2cc 100644 --- a/arch/arm/mach-dove/pcie.c +++ b/arch/arm/mach-dove/pcie.c @@ -182,18 +182,18 @@ static struct hw_pci dove_pci __initdata = { .map_irq = dove_pcie_map_irq, }; -static void __init add_pcie_port(int index, unsigned long base) +static void __init add_pcie_port(int index, void __iomem *base) { printk(KERN_INFO "Dove PCIe port %d: ", index); - if (orion_pcie_link_up((void __iomem *)base)) { + if (orion_pcie_link_up(base)) { struct pcie_port *pp = &pcie_port[num_pcie_ports++]; printk(KERN_INFO "link up\n"); pp->index = index; pp->root_bus_nr = -1; - pp->base = (void __iomem *)base; + pp->base = base; spin_lock_init(&pp->conf_lock); memset(&pp->res, 0, sizeof(pp->res)); } else { diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 4372075c551f922380dbd66467221584cd8c902c..da55107033ddad6490550722863ade8273695ffc 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -31,11 +31,11 @@ config CPU_EXYNOS4210 bool "SAMSUNG EXYNOS4210" default y depends on ARCH_EXYNOS4 - select SAMSUNG_DMADEV select ARM_CPU_SUSPEND if PM + select PM_GENERIC_DOMAINS select S5P_PM if PM select S5P_SLEEP if PM - select PM_GENERIC_DOMAINS + select SAMSUNG_DMADEV help Enable EXYNOS4210 CPU support @@ -43,9 +43,9 @@ config SOC_EXYNOS4212 bool "SAMSUNG EXYNOS4212" default y depends on ARCH_EXYNOS4 - select SAMSUNG_DMADEV select S5P_PM if PM select S5P_SLEEP if PM + select SAMSUNG_DMADEV help Enable EXYNOS4212 SoC support @@ -61,9 +61,9 @@ config SOC_EXYNOS5250 bool "SAMSUNG EXYNOS5250" default y depends on ARCH_EXYNOS5 - select SAMSUNG_DMADEV select S5P_PM if PM select S5P_SLEEP if PM + select SAMSUNG_DMADEV help Enable EXYNOS5250 SoC support @@ -189,71 +189,71 @@ config MACH_SMDKC210 config MACH_SMDKV310 bool "SMDKV310" select CPU_EXYNOS4210 - select S5P_DEV_FIMD0 + select EXYNOS4_DEV_AHCI + select EXYNOS4_DEV_USB_OHCI + select EXYNOS4_SETUP_FIMD0 + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_KEYPAD + select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY + select EXYNOS_DEV_DMA + select EXYNOS_DEV_DRM + select EXYNOS_DEV_SYSMMU + select S3C24XX_PWM + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_HSMMC2 + select S3C_DEV_HSMMC3 + select S3C_DEV_I2C1 select S3C_DEV_RTC + select S3C_DEV_USB_HSOTG select S3C_DEV_WDT - select S3C_DEV_I2C1 select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_FIMD0 select S5P_DEV_G2D select S5P_DEV_I2C_HDMIPHY select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_TV select S5P_DEV_USB_EHCI - select S3C_DEV_HSMMC - select S3C_DEV_HSMMC1 - select S3C_DEV_HSMMC2 - select S3C_DEV_HSMMC3 - select S3C_DEV_USB_HSOTG select SAMSUNG_DEV_BACKLIGHT - select EXYNOS_DEV_DRM - select EXYNOS_DEV_SYSMMU - select EXYNOS4_DEV_AHCI select SAMSUNG_DEV_KEYPAD - select EXYNOS_DEV_DMA select SAMSUNG_DEV_PWM - select EXYNOS4_DEV_USB_OHCI - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_KEYPAD - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select S3C24XX_PWM help Machine support for Samsung SMDKV310 config MACH_ARMLEX4210 bool "ARMLEX4210" select CPU_EXYNOS4210 - select S3C_DEV_RTC - select S3C_DEV_WDT + select EXYNOS4_DEV_AHCI + select EXYNOS4_SETUP_SDHCI + select EXYNOS_DEV_DMA select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 - select EXYNOS4_DEV_AHCI - select EXYNOS_DEV_DMA - select EXYNOS4_SETUP_SDHCI + select S3C_DEV_RTC + select S3C_DEV_WDT help Machine support for Samsung ARMLEX4210 based on EXYNOS4210 config MACH_UNIVERSAL_C210 bool "Mobile UNIVERSAL_C210 Board" - select CPU_EXYNOS4210 - select S5P_HRT select CLKSRC_MMIO + select CPU_EXYNOS4210 + select EXYNOS4_SETUP_FIMC + select EXYNOS4_SETUP_FIMD0 + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 + select EXYNOS4_SETUP_I2C5 + select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY + select EXYNOS_DEV_DMA + select EXYNOS_DEV_DRM + select EXYNOS_DEV_SYSMMU select HAVE_SCHED_CLOCK - select S5P_GPIO_INT - select S5P_DEV_FIMC0 - select S5P_DEV_FIMC1 - select S5P_DEV_FIMC2 - select S5P_DEV_FIMC3 - select S5P_DEV_G2D - select S5P_DEV_CSIS0 - select S5P_DEV_JPEG - select S5P_DEV_FIMD0 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 @@ -261,21 +261,21 @@ config MACH_UNIVERSAL_C210 select S3C_DEV_I2C3 select S3C_DEV_I2C5 select S3C_DEV_USB_HSOTG + select S5P_DEV_CSIS0 + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_FIMC3 + select S5P_DEV_FIMD0 + select S5P_DEV_G2D select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_ONENAND select S5P_DEV_TV - select EXYNOS_DEV_SYSMMU - select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C5 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_FIMC + select S5P_GPIO_INT + select S5P_HRT select S5P_SETUP_MIPIPHY - select EXYNOS4_SETUP_USB_PHY help Machine support for Samsung Mobile Universal S5PC210 Reference Board. @@ -283,10 +283,16 @@ config MACH_UNIVERSAL_C210 config MACH_NURI bool "Mobile NURI Board" select CPU_EXYNOS4210 - select S5P_GPIO_INT - select S3C_DEV_WDT - select S3C_DEV_RTC - select S5P_DEV_FIMD0 + select EXYNOS4_SETUP_FIMC + select EXYNOS4_SETUP_FIMD0 + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 + select EXYNOS4_SETUP_I2C5 + select EXYNOS4_SETUP_I2C6 + select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY + select EXYNOS_DEV_DMA + select EXYNOS_DEV_DRM select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 @@ -294,41 +300,42 @@ config MACH_NURI select S3C_DEV_I2C3 select S3C_DEV_I2C5 select S3C_DEV_I2C6 + select S3C_DEV_RTC select S3C_DEV_USB_HSOTG + select S3C_DEV_WDT select S5P_DEV_CSIS0 - select S5P_DEV_JPEG select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_FIMD0 select S5P_DEV_G2D + select S5P_DEV_JPEG select S5P_DEV_MFC select S5P_DEV_USB_EHCI + select S5P_GPIO_INT select S5P_SETUP_MIPIPHY - select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM - select EXYNOS4_SETUP_FIMC - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C5 - select EXYNOS4_SETUP_I2C6 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select S5P_SETUP_MIPIPHY - select SAMSUNG_DEV_PWM select SAMSUNG_DEV_ADC + select SAMSUNG_DEV_PWM help Machine support for Samsung Mobile NURI Board. config MACH_ORIGEN bool "ORIGEN" select CPU_EXYNOS4210 - select S3C_DEV_RTC - select S3C_DEV_WDT + select EXYNOS4_DEV_USB_OHCI + select EXYNOS4_SETUP_FIMD0 + select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY + select EXYNOS_DEV_DMA + select EXYNOS_DEV_DRM + select EXYNOS_DEV_SYSMMU + select S3C24XX_PWM select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 + select S3C_DEV_RTC select S3C_DEV_USB_HSOTG + select S3C_DEV_WDT select S5P_DEV_FIMC0 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 @@ -342,14 +349,6 @@ config MACH_ORIGEN select S5P_DEV_USB_EHCI select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM - select EXYNOS_DEV_DRM - select EXYNOS_DEV_SYSMMU - select EXYNOS_DEV_DMA - select EXYNOS4_DEV_USB_OHCI - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select S3C24XX_PWM help Machine support for ORIGEN based on Samsung EXYNOS4210 @@ -357,7 +356,17 @@ comment "EXYNOS4212 Boards" config MACH_SMDK4212 bool "SMDK4212" - select SOC_EXYNOS4212 + select EXYNOS4_SETUP_FIMD0 + select EXYNOS4_SETUP_I2C1 + select EXYNOS4_SETUP_I2C3 + select EXYNOS4_SETUP_I2C7 + select EXYNOS4_SETUP_KEYPAD + select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY + select EXYNOS_DEV_DMA + select EXYNOS_DEV_DRM + select EXYNOS_DEV_SYSMMU + select S3C24XX_PWM select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 @@ -375,17 +384,7 @@ config MACH_SMDK4212 select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_KEYPAD select SAMSUNG_DEV_PWM - select EXYNOS_DEV_SYSMMU - select EXYNOS_DEV_DMA - select EXYNOS_DEV_DRM - select EXYNOS4_SETUP_FIMD0 - select EXYNOS4_SETUP_I2C1 - select EXYNOS4_SETUP_I2C3 - select EXYNOS4_SETUP_I2C7 - select EXYNOS4_SETUP_KEYPAD - select EXYNOS4_SETUP_SDHCI - select EXYNOS4_SETUP_USB_PHY - select S3C24XX_PWM + select SOC_EXYNOS4212 help Machine support for Samsung SMDK4212 @@ -393,8 +392,8 @@ comment "EXYNOS4412 Boards" config MACH_SMDK4412 bool "SMDK4412" - select SOC_EXYNOS4412 select MACH_SMDK4212 + select SOC_EXYNOS4412 help Machine support for Samsung SMDK4412 endif @@ -404,12 +403,12 @@ comment "Flattened Device Tree based board for EXYNOS SoCs" config MACH_EXYNOS4_DT bool "Samsung Exynos4 Machine using device tree" depends on ARCH_EXYNOS4 - select CPU_EXYNOS4210 - select USE_OF select ARM_AMBA + select CPU_EXYNOS4210 select HAVE_SAMSUNG_KEYPAD if INPUT_KEYBOARD select PINCTRL select PINCTRL_EXYNOS4 + select USE_OF help Machine support for Samsung Exynos4 machine with device tree enabled. Select this if a fdt blob is available for the Exynos4 SoC based board. @@ -419,9 +418,9 @@ config MACH_EXYNOS4_DT config MACH_EXYNOS5_DT bool "SAMSUNG EXYNOS5 Machine using device tree" depends on ARCH_EXYNOS5 + select ARM_AMBA select SOC_EXYNOS5250 select USE_OF - select ARM_AMBA help Machine support for Samsung EXYNOS5 machine with device tree enabled. Select this if a fdt blob is available for the EXYNOS5 SoC based board. diff --git a/arch/arm/mach-exynos/dma.c b/arch/arm/mach-exynos/dma.c index f60b66dbcf84ebe5ebe750e3e89521724d7a8d73..21d568b3b1497c90bb79eb841f45595020351db9 100644 --- a/arch/arm/mach-exynos/dma.c +++ b/arch/arm/mach-exynos/dma.c @@ -303,10 +303,12 @@ static int __init exynos_dma_init(void) dma_cap_set(DMA_SLAVE, exynos_pdma0_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, exynos_pdma0_pdata.cap_mask); + dma_cap_set(DMA_PRIVATE, exynos_pdma0_pdata.cap_mask); amba_device_register(&exynos_pdma0_device, &iomem_resource); dma_cap_set(DMA_SLAVE, exynos_pdma1_pdata.cap_mask); dma_cap_set(DMA_CYCLIC, exynos_pdma1_pdata.cap_mask); + dma_cap_set(DMA_PRIVATE, exynos_pdma1_pdata.cap_mask); amba_device_register(&exynos_pdma1_device, &iomem_resource); dma_cap_set(DMA_MEMCPY, exynos_mdma1_pdata.cap_mask); diff --git a/arch/arm/mach-exynos/mach-nuri.c b/arch/arm/mach-exynos/mach-nuri.c index 480cd78f1920da5a1fdd62a0593b2231923ea53d..c05d7aa84031b70a601598fd0a5542dfbf3056f3 100644 --- a/arch/arm/mach-exynos/mach-nuri.c +++ b/arch/arm/mach-exynos/mach-nuri.c @@ -29,6 +29,7 @@ #include #include