scsi: BusLogic: Fix missing pr_cont() use
Update BusLogic driver's messaging system to use pr_cont() for continuation lines, bringing messy output: pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17 scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 ***** scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com> scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter scsi0: Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level scsi0: PCI Bus: 0, Device: 19, Address: 0xE0012000, Host Adapter SCSI ID: 7 scsi0: Parity Checking: Enabled, Extended Translation: Enabled scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211 scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192 scsi0: Tagged Queue Depth: Automatic , Untagged Queue Depth: 3 scsi0: SCSI Bus Termination: Both Enabled , SCAM: Disabled scsi0: *** BusLogic BT-958 Initialized Successfully *** scsi host0: BusLogic BT-958 back to order: pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17 scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 ***** scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com> scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter scsi0: Firmware Version: 5.07B, I/O Address: 0x7000, IRQ Channel: 17/Level scsi0: PCI Bus: 0, Device: 19, Address: 0xE0012000, Host Adapter SCSI ID: 7 scsi0: Parity Checking: Enabled, Extended Translation: Enabled scsi0: Synchronous Negotiation: Ultra, Wide Negotiation: Enabled scsi0: Disconnect/Reconnect: Enabled, Tagged Queuing: Enabled scsi0: Scatter/Gather Limit: 128 of 8192 segments, Mailboxes: 211 scsi0: Driver Queue Depth: 211, Host Adapter Queue Depth: 192 scsi0: Tagged Queue Depth: Automatic, Untagged Queue Depth: 3 scsi0: SCSI Bus Termination: Both Enabled, SCAM: Disabled scsi0: *** BusLogic BT-958 Initialized Successfully *** scsi host0: BusLogic BT-958 Also diagnostic output such as with the BusLogic=TraceConfiguration parameter is affected and becomes vertical and therefore hard to read. This has now been corrected, e.g.: pci 0000:00:13.0: PCI->APIC IRQ transform: INT A -> IRQ 17 blogic_cmd(86) Status = 30: 4 ==> 4: FF 05 93 00 blogic_cmd(95) Status = 28: (Modify I/O Address) blogic_cmd(91) Status = 30: 1 ==> 1: 01 blogic_cmd(04) Status = 30: 4 ==> 4: 41 41 35 30 blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D scsi: ***** BusLogic SCSI Driver Version 2.1.17 of 12 September 2013 ***** scsi: Copyright 1995-1998 by Leonard N. Zubkoff <lnz@dandelion.com> blogic_cmd(04) Status = 30: 4 ==> 4: 41 41 35 30 blogic_cmd(0B) Status = 30: 3 ==> 3: 00 08 07 blogic_cmd(0D) Status = 30: 34 ==> 34: 03 01 07 04 00 00 00 00 00 00 00 00 00 00 00 00 FF 42 44 46 FF 00 00 00 00 00 00 00 00 00 FF 00 FF 00 blogic_cmd(8D) Status = 30: 14 ==> 14: 45 DC 00 20 00 00 00 00 00 40 30 37 42 1D blogic_cmd(84) Status = 30: 1 ==> 1: 37 blogic_cmd(8B) Status = 30: 5 ==> 5: 39 35 38 20 20 blogic_cmd(85) Status = 30: 1 ==> 1: 42 blogic_cmd(86) Status = 30: 4 ==> 4: FF 05 93 00 blogic_cmd(91) Status = 30: 64 ==> 64: 41 46 3E 20 39 35 38 20 20 00 C4 00 04 01 07 2F 07 04 35 FF FF FF FF FF FF FF FF FF FF 01 00 FE FF 08 FF FF 00 00 00 00 00 00 00 01 00 01 00 00 FF FF 00 00 00 00 00 00 00 00 00 00 00 00 00 FC scsi0: Configuring BusLogic Model BT-958 PCI Wide Ultra SCSI Host Adapter etc. Link: https://lore.kernel.org/r/alpine.DEB.2.21.2104201940430.44318@angie.orcam.me.uk Fixes: 4bcc595c ("printk: reinstate KERN_CONT for printing continuation lines") Cc: stable@vger.kernel.org # v4.9+ Acked-by:Khalid Aziz <khalid@gonehiking.org> Signed-off-by: