Pull powerpc fixes from Michael Ellerman:

 - Fix a bad interaction between the scv handling and the fallback L1D
   flush, which could lead to user register corruption. Only affects
   people using scv (~no one) on machines with old firmware that are
   missing the L1D flush.

 - Two small selftest fixes.

Thanks to Eirik Fuller, Libor Pechacek, Nicholas Piggin, Sandipan Das,
and Tulio Magno Quites Machado Filho.

* tag 'powerpc-5.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/64s: fix scv entry fallback flush vs interrupt
  selftests/powerpc: Only test lwm/stmw on big endian
  selftests/powerpc: Fix exit status of pkey tests

Pull misc fixes from Christian Brauner:

 - Jann reported sparse complaints because of a missing __user
   annotation in a helper we added way back when we added
   pidfd_send_signal() to avoid compat syscall handling. Fix it.

 - Yanfei replaces a reference in a comment to the _do_fork() helper I
   removed a while ago with a reference to the new kernel_clone()
   replacement

 - Alexander Guril added a simple coding style fix

* tag 'for-linus-2021-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
  kthread: remove comments about old _do_fork() helper
  Kernel: fork.c: Fix coding style: Do not use {} around single-line statements
  signal: Add missing __user annotation to copy_siginfo_from_user_any

Pull cifs fixes from Steve French:
 "An important signal handling patch for stable, and two small cleanup
  patches"

* tag '5.11-rc4-smb3' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: do not fail __smb_send_rqst if non-fatal signals are pending
  fs/cifs: Simplify bool comparison.
  fs/cifs: Assign boolean values to a bool variable

Pull mtd fixes from Miquel Raynal.

* 'mtd/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux:
  mtd: rawnand: omap: Use BCH private fields in the specific OOB layout
  mtd: spinand: Fix MTD_OPS_AUTO_OOB requests
  mtd: rawnand: intel: check the mtd name only after setting the variable
  mtd: rawnand: nandsim: Fix the logic when selecting Hamming soft ECC engine
  mtd: rawnand: gpmi: fix dst bit offset when extracting raw payload

Pull i2c fixes from Wolfram Sang:
 "Another bunch  of driver fixes"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: sprd: depend on COMMON_CLK to fix compile tests
  Revert "i2c: imx: Remove unused .id_table support"
  i2c: octeon: check correct size of maximum RECV_LEN packet
  i2c: tegra: Create i2c_writesl_vi() to use with VI I2C for filling TX FIFO
  i2c: bpmp-tegra: Ignore unknown I2C_M flags
  i2c: tegra: Wait for config load atomically while in ISR

Pull SCSI fixes from James Bottomley:
 "Twelve minor fixes, all in drivers or doc.

  Most of the fixes are pretty obvious (although we had two goes to get
  the UFS sysfs doc right) and the biggest change is in the ufs driver
  which they've extensively tested"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ibmvfc: Set default timeout to avoid crash during migration
  scsi: target: tcmu: Fix use-after-free of se_cmd->priv
  scsi: fnic: Fix memleak in vnic_dev_init_devcmd2
  scsi: libfc: Avoid invoking response handler twice if ep is already completed
  scsi: scsi_transport_srp: Don't block target in failfast state
  scsi: docs: ABI: sysfs-driver-ufs: Rectify table formatting
  scsi: ufs: Fix tm request when non-fatal error happens
  scsi: ufs: Fix livelock of ufshcd_clear_ua_wluns()
  scsi: ibmvfc: Fix missing cast of ibmvfc_event pointer to u64 handle
  scsi: ufs: ufshcd-pltfrm depends on HAS_IOMEM
  scsi: megaraid_sas: Fix MEGASAS_IOC_FIRMWARE regression
  scsi: docs: ABI: sysfs-driver-ufs: Add DeepSleep power mode

Merge tag 'linux-kselftest-kunit-fixes-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kunit fixes from Shuah :
 "Five fixes to the kunit tool and documentation from Daniel Latypov and
  David Gow"

* tag 'linux-kselftest-kunit-fixes-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  kunit: tool: move kunitconfig parsing into __init__, make it optional
  kunit: tool: fix minor typing issue with None status
  kunit: tool: surface and address more typing issues
  Documentation: kunit: include example of a parameterized test
  kunit: tool: Fix spelling of "diagnostic" in kunit_parser

RHBZ 1848178

The original intent of returning an error in this function
in the patch:
  "CIFS: Mask off signals when sending SMB packets"
was to avoid interrupting packet send in the middle of
sending the data (and thus breaking an SMB connection),
but we also don't want to fail the request for non-fatal
signals even before we have had a chance to try to
send it (the reported problem could be reproduced e.g.
by exiting a child process when the parent process was in
the midst of calling futimens to update a file's timestamps).

In addition, since the signal may remain pending when we enter the
sending loop, we may end up not sending the whole packet before
TCP buffers become full. In this case the code returns -EINTR
but what we need here is to return -ERESTARTSYS instead to
allow system calls to be restarted.

Fixes: b30c74c7

 ("CIFS: Mask off signals when sending SMB packets")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com>
Reviewed-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>

Merge tag 'for-5.11/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm

Pull device mapper fixes from Mike Snitzer:

 - Fix DM integrity crash if "recalculate" used without "internal_hash"

 - Fix DM integrity "recalculate" support to prevent recalculating
   checksums if we use internal_hash or journal_hash with a key (e.g.
   HMAC). Use of crypto as a means to prevent malicious corruption
   requires further changes and was never a design goal for
   dm-integrity's primary usecase of detecting accidental corruption.

 - Fix a benign dm-crypt copy-and-paste bug introduced as part of a fix
   that was merged for 5.11-rc4.

 - Fix DM core's dm_get_device() to avoid filesystem lookup to get block
   device (if possible).

* tag 'for-5.11/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm: avoid filesystem lookup in dm_get_dev_t()
  dm crypt: fix copy and paste bug in crypt_alloc_req_aead
  dm integrity: conditionally disable "recalculate" feature
  dm integrity: fix a crash if "recalculate" used without "internal_hash"

Merge tag 'perf-tools-fixes-v5.11-2-2021-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull more perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix id index used in Intel PT for heterogeneous systems

 - Fix overrun issue in 'perf script' for dynamically-allocated PMU type
   number

 - Fix 'perf stat' metrics containing the 'duration_time' synthetic
   event

 - Fix system PMU 'perf stat' metrics

* tag 'perf-tools-fixes-v5.11-2-2021-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf script: Fix overrun issue for dynamically-allocated PMU type number
  perf metricgroup: Fix system PMU metrics
  perf metricgroup: Fix for metrics containing duration_time
  perf evlist: Fix id index for heterogeneous systems

Pull arm64 fixes from Catalin Marinas:

 - Correctly mask out bits 63:60 in a kernel tag check fault address
   (specified as unknown by the architecture). Previously they were just
   zeroed but for kernel pointers they need to be all ones.

 - Fix a panic (unexpected kernel BRK exception) caused by kprobes being
   reentered due to an interrupt.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: kprobes: Fix Uexpected kernel BRK exception at EL1
  kasan, arm64: fix pointer tags in KASAN reports

Pull ceph fixes from Ilya Dryomov:
 "A patch to zero out sensitive cryptographic data and two minor
  cleanups prompted by the fact that a bunch of code was moved in this
  cycle"

* tag 'ceph-for-5.11-rc5' of git://github.com/ceph/ceph-client:
  libceph: fix "Boolean result is used in bitwise operation" warning
  libceph, ceph: disambiguate ceph_connection_operations handlers
  libceph: zero out session key and connection secret

Pull typo fix from Mike Rapoport:
 "Fix typo in comment of memblock_phys_alloc_try_nid()"

* tag 'fixes-2021-01-22' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
  mm/memblock: Fix typo in comment of memblock_phys_alloc_try_nid()

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix initialization of block size when ext_csd isn't present

  MMC host:
   - sdhci-brcmstb: Fix mmc timeout errors on S5 suspend
   - sdhci-of-dwcmshc: Fix request accessing RPMB
   - sdhci-xenon: Fix 1.8v regulator stabilization"

* tag 'mmc-v5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: core: don't initialize block size from ext_csd if not present
  mmc: sdhci-brcmstb: Fix mmc timeout errors on S5 suspend
  mmc: sdhci-xenon: fix 1.8v regulator stabilization
  mmc: sdhci-of-dwcmshc: fix rpmb access

Merge tag 'platform-drivers-x86-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86

Pull x86 platform driver fixes from Hans de Goede:
 "A small collection of bug-fixes and model-specific quirks"

* tag 'platform-drivers-x86-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
  platform/x86: thinkpad_acpi: Add P53/73 firmware to fan_quirk_table for dual fan control
  platform/x86: hp-wmi: Don't log a warning on HPWMI_RET_UNKNOWN_COMMAND errors
  platform/x86: intel-vbtn: Drop HP Stream x360 Convertible PC 11 from allow-list
  platform/x86: ideapad-laptop: Disable touchpad_switch for ELAN0634
  platform/x86: amd-pmc: Fix CONFIG_DEBUG_FS check
  platform/x86: thinkpad_acpi: correct palmsensor error checking
  platform/x86: intel-vbtn: Support for tablet mode on Dell Inspiron 7352
  platform/x86: touchscreen_dmi: Add swap-x-y quirk for Goodix touchscreen on Estar Beauty HD tablet
  platform/x86: i2c-multi-instantiate: Don't create platform device for INT3515 ACPI nodes
  platform/surface: SURFACE_PLATFORMS should depend on ACPI
  platform/surface: surface_gpe: Fix non-PM_SLEEP build warnings
  tools/power/x86/intel-speed-select: Set higher of cpuinfo_max_freq or base_frequency
  tools/power/x86/intel-speed-select: Set scaling_max_freq to base_frequency

I was hitting the below panic continuously when attaching kprobes to
scheduler functions

	[  159.045212] Unexpected kernel BRK exception at EL1
	[  159.053753] Internal error: BRK handler: f2000006 [#1] PREEMPT SMP
	[  159.059954] Modules linked in:
	[  159.063025] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.11.0-rc4-00008-g1e2a199f6ccd #56
	[rt-app] <notice> [1] Exiting.[  159.071166] Hardware name: ARM Juno development board (r2) (DT)
	[  159.079689] pstate: 600003c5 (nZCv DAIF -PAN -UAO -TCO BTYPE=--)

	[  159.085723] pc : 0xffff80001624501c
	[  159.089377] lr : attach_entity_load_avg+0x2ac/0x350
	[  159.094271] sp : ffff80001622b640
	[rt-app] <notice> [0] Exiting.[  159.097591] x29: ffff80001622b640 x28: 0000000000000001
	[  159.105515] x27: 0000000000000049 x26: ffff000800b79980

	[  159.110847] x25: ffff00097ef37840 x24: 0000000000000000
	[  159.116331] x23: 00000024eacec1ec x22: ffff00097ef12b90
	[  159.121663] x21: ffff00097ef37700 x20: ffff800010119170
	[rt-app] <notice> [11] Exiting.[  159.126995] x19: ffff00097ef37840 x18: 000000000000000e
	[  159.135003] x17: 0000000000000001 x16: 0000000000000019
	[  159.140335] x15: 0000000000000000 x14: 0000000000000000
	[  159.145666] x13: 0000000000000002 x12: 0000000000000002
	[  159.150996] x11: ffff80001592f9f0 x10: 0000000000000060
	[  159.156327] x9 : ffff8000100f6f9c x8 : be618290de0999a1
	[  159.161659] x7 : ffff80096a4b1000 x6 : 0000000000000000
	[  159.166990] x5 : ffff00097ef37840 x4 : 0000000000000000
	[  159.172321] x3 : ffff000800328948 x2 : 0000000000000000
	[  159.177652] x1 : 0000002507d52fec x0 : ffff00097ef12b90
	[  159.182983] Call trace:
	[  159.185433]  0xffff80001624501c
	[  159.188581]  update_load_avg+0x2d0/0x778
	[  159.192516]  enqueue_task_fair+0x134/0xe20
	[  159.196625]  enqueue_task+0x4c/0x2c8
	[  159.200211]  ttwu_do_activate+0x70/0x138
	[  159.204147]  sched_ttwu_pending+0xbc/0x160
	[  159.208253]  flush_smp_call_function_queue+0x16c/0x320
	[  159.213408]  generic_smp_call_function_single_interrupt+0x1c/0x28
	[  159.219521]  ipi_handler+0x1e8/0x3c8
	[  159.223106]  handle_percpu_devid_irq+0xd8/0x460
	[  159.227650]  generic_handle_irq+0x38/0x50
	[  159.231672]  __handle_domain_irq+0x6c/0xc8
	[  159.235781]  gic_handle_irq+0xcc/0xf0
	[  159.239452]  el1_irq+0xb4/0x180
	[  159.242600]  rcu_is_watching+0x28/0x70
	[  159.246359]  rcu_read_lock_held_common+0x44/0x88
	[  159.250991]  rcu_read_lock_any_held+0x30/0xc0
	[  159.255360]  kretprobe_dispatcher+0xc4/0xf0
	[  159.259555]  __kretprobe_trampoline_handler+0xc0/0x150
	[  159.264710]  trampoline_probe_handler+0x38/0x58
	[  159.269255]  kretprobe_trampoline+0x70/0xc4
	[  159.273450]  run_rebalance_domains+0x54/0x80
	[  159.277734]  __do_softirq+0x164/0x684
	[  159.281406]  irq_exit+0x198/0x1b8
	[  159.284731]  __handle_domain_irq+0x70/0xc8
	[  159.288840]  gic_handle_irq+0xb0/0xf0
	[  159.292510]  el1_irq+0xb4/0x180
	[  159.295658]  arch_cpu_idle+0x18/0x28
	[  159.299245]  default_idle_call+0x9c/0x3e8
	[  159.303265]  do_idle+0x25c/0x2a8
	[  159.306502]  cpu_startup_entry+0x2c/0x78
	[  159.310436]  secondary_start_kernel+0x160/0x198
	[  159.314984] Code: d42000c0 aa1e03e9 d42000c0 aa1e03e9 (d42000c0)

After a bit of head scratching and debugging it turned out that it is
due to kprobe handler being interrupted by a tick that causes us to go
into (I think another) kprobe handler.

The culprit was kprobe_breakpoint_ss_handler() returning DBG_HOOK_ERROR
which leads to the Unexpected kernel BRK exception.

Reverting commit ba090f9c ("arm64: kprobes: Remove redundant
kprobe_step_ctx") seemed to fix the problem for me.

Further analysis showed that kcb->kprobe_status is set to
KPROBE_REENTER when the error occurs. By teaching
kprobe_breakpoint_ss_handler() to handle this status I can no  longer
reproduce the problem.

Fixes: ba090f9c

 ("arm64: kprobes: Remove redundant kprobe_step_ctx")
Signed-off-by: Qais Yousef <qais.yousef@arm.com>
Acked-by: Will Deacon <will@kernel.org>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210122110909.3324607-1-qais.yousef@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>

The I2C_SPRD uses Common Clock Framework thus it cannot be built on
platforms without it (e.g. compile test on MIPS with LANTIQ):

    /usr/bin/mips-linux-gnu-ld: drivers/i2c/busses/i2c-sprd.o: in function `sprd_i2c_probe':
    i2c-sprd.c:(.text.sprd_i2c_probe+0x254): undefined reference to `clk_set_parent'

Fixes: 4a2d5f66

 ("i2c: Enable compile testing for more drivers")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Baolin Wang <baolin.wang7@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Coldfire platforms are non-DT users of this driver, so
keep the .id_table support.

This reverts commit c610199c.

Fixes: c610199c

 (i2c: imx: Remove unused .id_table support")
Reported-by: Sascha Hauer <sha@pengutronix.de>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>

Pull OpenRISC fixes from Stafford Horne:

 - Compiler warning fixup for new Litex SoC driver

 - Sparse warning fixup for iounmap

* tag 'for-linus' of git://github.com/openrisc/linux:
  openrisc: io: Add missing __iomem annotation to iounmap()
  soc: litex: Fix compile warning when device tree is not configured

Pull drm fixes from Dave Airlie:
 "Regular fixes pull, nothing too major in here, just some core fixes,
  one vc4, bunch of i915 and a bunch of amdgpu.

  core:
   - atomic: Release state on error
   - syncobj: Fix use-after-free
   - ttm: Don't use GFP_TRANSHUGE_LIGTH
   - vram-helper: Fix memory leak in vmap

  vc4:
   - Unify driver naming for PCM

  i915:
   - HDCP fixes
   - PMU wakeref fix
   - Fix HWSP validity race
   - Fix DP protocol converter accidental 4:4:4->4:2:0 conversion for RGB

  amdgpu:
   - Green Sardine fixes
   - Vangogh fixes
   - Renoir fixes
   - Misc display fixes"

* tag 'drm-fixes-2021-01-22' of git://anongit.freedesktop.org/drm/drm: (21 commits)
  drm/amdgpu: update mmhub mgcg&ls for mmhub_v2_3
  drm/amdgpu: modify GCR_GENERAL_CNTL for Vangogh
  drm/amdgpu/pm: no need GPU status set since mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL added in FSDL
  drm/amd/display: Fixed corruptions on HPDRX link loss restore
  drm/amd/display: Use hardware sequencer functions for PG control
  drm/amd/display: Change function decide_dp_link_settings to avoid infinite looping
  drm/amd/display: Allow PSTATE chnage when no displays are enabled
  drm/amd/display: Update dram_clock_change_latency for DCN2.1
  drm/amdgpu: remove gpu info firmware of green sardine
  drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM Case
  drm/syncobj: Fix use-after-free
  drm/vram-helper: Reuse existing page mappings in vmap
  drm/atomic: put state on error path
  drm/i915: Only enable DFP 4:4:4->4:2:0 conversion when outputting YCbCr 4:4:4
  drm/i915: Check for rq->hwsp validity after acquiring RCU lock
  drm/i915/pmu: Don't grab wakeref when enabling events
  drm/i915/gt: Prevent use of engine->wa_ctx after error
  drm/vc4: Unify PCM card's driver_name
  drm/ttm: stop using GFP_TRANSHUGE_LIGHT
  drm/i915/hdcp: Get conn while content_type changed
  ...

Merge tag 'amd-drm-fixes-5.11-2021-01-21' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.11-2021-01-21:

amdgpu:
- Green Sardine fixes
- Vangogh fixes
- Renoir fixes
- Misc display fixes

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210121160129.3981-1-alexander.deucher@amd.com

Merge tag 'drm-intel-fixes-2021-01-21' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

drm/i915 fixes for v5.11-rc5:
- HDCP fixes
- PMU wakeref fix
- Fix HWSP validity race
- Fix DP protocol converter accidental 4:4:4->4:2:0 conversion for RGB

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87a6t2kzgb.fsf@intel.com

Short summary of fixes pull (less than what git shortlog provides):

 * drm/atomic: Release state on error
 * drm/syncobj: Fix use-after-free
 * drm/ttm: Don't use GFP_TRANSHUGE_LIGTH
 * drm/vc4: Unify driver naming for PCM
 * drm/vram-helper: Fix memory leak in vmap

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YAgdYGNoH7pC29rz@linux-uq9g

When unpacking the event which is from dynamic PMU, the array
output[OUTPUT_TYPE_MAX] may be overrun. For example, type number of SKL
uncore_imc is 10, but OUTPUT_TYPE_MAX is 7 now (OUTPUT_TYPE_MAX =
PERF_TYPE_MAX + 1).

/* In builtin-script.c */

process_event()
{
        unsigned int type = output_type(attr->type);

        if (output[type].fields == 0)
                return;
}

output[10] is overrun.

Create a type OUTPUT_TYPE_OTHER for dynamic PMU events, then
output_type(attr->type) will return OUTPUT_TYPE_OTHER here.

Note that if PERF_TYPE_MAX ever changed, then there would be a conflict
between old perf.data files that had a dynamicaliy allocated PMU number
that would then be the same as a fixed PERF_TYPE.

Example:

  # perf record --switch-events -C 0 -e "{cpu-clock,uncore_imc/data_reads/,uncore_imc/data_writes/}:SD" -a -- sleep 1
  # perf script

  Before:
         swapper     0 [000] 1479253.987551:     277766               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.987797:     246709               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.988127:     329883               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.988273:     146393               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.988523:     249977               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.988877:     354090               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.989023:     145940               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.989383:     359856               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1479253.989523:     140082               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])

  After:
         swapper     0 [000] 1397040.402011:     272384               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1397040.402011:       5396  uncore_imc/data_reads/:
         swapper     0 [000] 1397040.402011:        967 uncore_imc/data_writes/:
         swapper     0 [000] 1397040.402259:     249153               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1397040.402259:       7231  uncore_imc/data_reads/:
         swapper     0 [000] 1397040.402259:       1297 uncore_imc/data_writes/:
         swapper     0 [000] 1397040.402508:     249108               cpu-clock:  ffffffff9d4ddb6f cpuidle_enter_state+0xdf ([kernel.kallsyms])
         swapper     0 [000] 1397040.402508:       5333  uncore_imc/data_reads/:
         swapper     0 [000] 1397040.402508:       1008 uncore_imc/data_writes/:

Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Link: https://lore.kernel.org/r/20201209005828.21302-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Joakim reports that getting "perf stat" for multiple system PMU metrics
segfaults:

  $ perf stat -a -I 1000 -M imx8mm_ddr_write.all,imx8mm_ddr_write.all
  Segmentation fault
  $

While the same works without issue for a single metric.

The logic in metricgroup__add_metric_sys_event_iter() is broken, in that
add_metric() @m argument should be NULL for each new metric. Fix by not
passing a holder for that, and rather make local in
metricgroup__add_metric_sys_event_iter().

Fixes: be335ec2

 ("perf metricgroup: Support adding metrics for system PMUs")
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611050655-44020-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Metrics containing duration_time cause a segfault:

  $ perf stat -v -M L1D_Cache_Fill_BW sleep 1
  Using CPUID GenuineIntel-6-3D-4
  metric expr 64 * l1d.replacement / 1000000000 / duration_time for L1D_Cache_Fill_BW
  found event duration_time
  found event l1d.replacement
  adding {l1d.replacement}:W,duration_time
  l1d.replacement -> cpu/umask=0x1,(null)=0x1e8483,event=0x51/
  Segmentation fault
  $

In commit c2337d67 ("perf metricgroup: Fix metrics using aliases
covering multiple PMUs"), the logic in find_evsel_group() when iter'ing
events was changed to not only select events in same group, but also for
aliased PMUs.

Checking whether events were for aliased PMUs was done by comparing the
event PMU name. This was not safe for duration_time event, which has no
associated PMU (and no PMU name), so fix by checking if the event PMU name
is set also.

Committer testing:

Reproduced the bug, then, on a:

  $ grep -m1 ^'model name' /proc/cpuinfo
  model name	: Intel(R) Core(TM) i7-8650U CPU @ 1.90GHz
  $

We now get:

  $ perf stat -M L1D_Cache_Fill_BW sleep 1

   Performance counter stats for 'sleep 1':

               4,141      l1d.replacement:u
       1,001,285,107 ns   duration_time:u

         1.001285107 seconds time elapsed

         0.000000000 seconds user
         0.001119000 seconds sys

  $

Detais from -v:

  Using CPUID GenuineIntel-6-8E-A
  metric expr 64 * l1d.replacement / 1000000000 / duration_time for L1D_Cache_Fill_BW
  found event duration_time
  found event l1d.replacement
  adding {l1d.replacement}:W,duration_time
  l1d.replacement -> cpu/(null)=0x1e8483,umask=0x1,event=0x51/
  Control descriptor is not initialized
  Warning:
  kernel.perf_event_paranoid=2, trying to fall back to excluding kernel and hypervisor  samples
  Warning:
  kernel.perf_event_paranoid=2, trying to fall back to excluding kernel and hypervisor  samples
  l1d.replacement:u: 4592 612201 612201
  duration_time:u: 1001478621 1001478621 1001478621

Fixes: c2337d67

 ("perf metricgroup: Fix metrics using aliases covering multiple PMUs")
Reported-by: Joakim Zhang <qiangqing.zhang@nxp.com>
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@openeuler.org
Link: https://lore.kernel.org/r/1611159518-226883-1-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf_evlist__set_sid_idx() updates perf_sample_id with the evlist map
index, CPU number and TID. It is passed indexes to the evsel's cpu and
thread maps, but references the evlist's maps instead. That results in
using incorrect CPU numbers on heterogeneous systems. Fix it by using
evsel maps.

The id index (PERF_RECORD_ID_INDEX) is used by AUX area tracing when in
sampling mode. Having an incorrect CPU number causes the trace data to
be attributed to the wrong CPU, and can result in decoder errors because
the trace data is then associated with the wrong process.

Committer notes:

Keep the class prefix convention in the function name, switching from
perf_evlist__set_sid_idx() to perf_evsel__set_sid_idx().

Fixes: 3c659eed

 ("perf tools: Add id index")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210121125446.11287-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

This reverts commit
644bda6f ("dm table: fall back to getting device using name_to_dev_t()")

dm_get_dev_t() is just used to convert an arbitrary 'path' string
into a dev_t. It doesn't presume that the device is present; that
check will be done later, as the only caller is dm_get_device(),
which does a dm_get_table_device() later on, which will properly
open the device.

So if the path string already _is_ in major:minor representation
we can convert it directly, avoiding a recursion into the filesystem
to lookup the block device.

This avoids a hang in multipath_message() when the filesystem is
inaccessible.

Fixes: 644bda6f

 ("dm table: fall back to getting device using name_to_dev_t()")
Cc: stable@vger.kernel.org
Signed-off-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Martin Wilck <mwilck@suse.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

In commit d68b2958 ("dm crypt: use GFP_ATOMIC when allocating
crypto requests from softirq") code was incorrectly copy and pasted
from crypt_alloc_req_skcipher()'s crypto request allocation code to
crypt_alloc_req_aead(). It is OK from runtime perspective as both
simple encryption request pointer and AEAD request pointer are part of
a union, but may confuse code reviewers.

Fixes: d68b2958

 ("dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq")
Cc: stable@vger.kernel.org # v5.9+
Reported-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Otherwise a malicious user could (ab)use the "recalculate" feature
that makes dm-integrity calculate the checksums in the background
while the device is already usable. When the system restarts before all
checksums have been calculated, the calculation continues where it was
interrupted even if the recalculate feature is not requested the next
time the dm device is set up.

Disable recalculating if we use internal_hash or journal_hash with a
key (e.g. HMAC) and we don't have the "legacy_recalculate" flag.

This may break activation of a volume, created by an older kernel,
that is not yet fully recalculated -- if this happens, the user should
add the "legacy_recalculate" flag to constructor parameters.

Cc: stable@vger.kernel.org
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reported-by: Daniel Glockner <dg@emlix.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Pull fs and udf fixes from Jan Kara:
 "A lazytime handling fix from Eric Biggers and a fix of UDF session
  handling for large devices"

* tag 'fs_for_v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  udf: fix the problem that the disc content is not displayed
  fs: fix lazytime expiration handling in __writeback_single_inode()

Recalculate can only be specified with internal_hash.

Cc: stable@vger.kernel.org # v4.19+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>

Merge tag 'printk-for-5.11-printk-rework-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux

Pull printk fixes from Petr Mladek:

 - Fix line counting and buffer size calculation. Both regressions
   caused that a reader buffer might not get filled as much as possible.

 - Restore non-documented behavior of printk() reader API and make it
   official.

   It did not fill the last byte of the provided buffer before 5.10. Two
   architectures, powerpc and um, used it to add the trailing '\0'.
   There might theoretically be more callers depending on this behavior
   in userspace.

* tag 'printk-for-5.11-printk-rework-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
  printk: fix buffer overflow potential for print_text()
  printk: fix kmsg_dump_get_buffer length calulations
  printk: ringbuffer: fix line counting

Pull ACPI fix from Rafael Wysocki:
 "Modify a helper function in the ACPI core to match the behavior
  expected by its users so as to prevent NULL pointer dereferences and
  occasional memory corruption from occurring (Hans de Goede)"

* tag 'acpi-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: scan: Make acpi_bus_get_device() clear return pointer on error

Pull sound fixes from Takashi Iwai:
 "Here is a collection of sound fixes targeted for 5.11-rc5. Most
  notably, USB-audio still got a few intensive changes for covering the
  regressions while the rest are all small fixes.

   - A trivial fix for sequencer OSS emulation error path

   - HD-audio runtime PM regression fix, a few quirks and new IDs

   - USB-audio regression fixes for Pioneer device, Logitech webcams,
     etc

   - ASoC SOF Intel coverage

   - MAINTAINERS file update

   - A fix in the jack handling in ASoC HDMI codec"

* tag 'sound-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: usb-audio: Fix hw constraints dependencies
  ALSA: hda: Balance runtime/system PM if direct-complete is disabled
  ALSA: usb-audio: Avoid implicit feedback on Pioneer devices
  ALSA: usb-audio: Set sample rate for all sharing EPs on UAC1
  ALSA: usb-audio: Fix UAC1 rate setup for secondary endpoints
  MAINTAINERS: update qcom ASoC drivers list
  MAINTAINERS: update maintainers of qcom audio
  ALSA: hda: Add Cometlake-R PCI ID
  ALSA: seq: oss: Fix missing error check in snd_seq_oss_synth_make_info()
  ALSA: hda/via: Add minimum mute flag
  ALSA: hda/realtek - Limit int mic boost on Acer Aspire E5-575T
  ALSA: usb-audio: Always apply the hw constraints for implicit fb sync
  ASoC: SOF: Intel: fix page fault at probe if i915 init fails
  ALSA: hda: Add AlderLake-P PCI ID and HDMI codec vid
  ASoC: SOF: Intel: hda: Avoid checking jack on system suspend
  ASoC: SOF: Intel: hda: Modify existing helper to disable WAKEEN
  ASoC: SOF: Intel: hda: Resume codec to do jack detection
  MAINTAINERS: update references to stm32 audio bindings
  ASoC: hdmi-codec: Fix return value in hdmi_codec_set_jack()

Pull gpio fixes from Bartosz Golaszewski:

 - rework the character device code to avoid a frame size warning

 - fix printk format issues in gpio-tools

 - warn on redefinition of the to_irq callback in core gpiolib code

 - fix PWM period calculation in gpio-mvebu

 - make gpio-sifive Kconfig entry consistent with other drivers

 - fix a build issue in gpio-tegra

* tag 'gpio-fixes-for-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: tegra: Add missing dependencies
  gpio: sifive: select IRQ_DOMAIN_HIERARCHY rather than depend on it
  gpio: mvebu: fix pwm .get_state period calculation
  gpiolib: add a warning on gpiochip->to_irq defined
  tools: gpio: fix %llu warning in gpio-watch.c
  tools: gpio: fix %llu warning in gpio-event-mon.c
  gpiolib: cdev: fix frame size warning in gpio_ioctl()

Pull pin control fixes from Linus Walleij:
 "These are all driver fixes, the Qualcomm stuff is the most widely used
  and important:

   - The main matter is a complicated fixup for the Qualcomm deep sleep
     states.

     This manifests in how interrupts get handled or in some cases not
     handled in cooperation with the PDC (Power Domain Controller). It's
     one of these really hardcore bug fixes that signifies high maturity
     of the platform.

   - Fix a register layout problem in the JZ4760 driver

   - Fix a register offset in the Aspeed G6 driver

   - Fix a compiler warning in the Nomadik driver

   - Fix a fallback code path in the mediatek driver"

* tag 'pinctrl-v5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: Don't clear pending interrupts when enabling
  pinctrl: qcom: Properly clear "intr_ack_high" interrupts when unmasking
  pinctrl: qcom: No need to read-modify-write the interrupt status
  pinctrl: qcom: Allow SoCs to specify a GPIO function that's not 0
  pinctrl: mediatek: Fix fallback call path
  pinctrl: nomadik: Remove unused variable in nmk_gpio_dbg_show_one
  pinctrl: aspeed: g6: Fix PWMG0 pinctrl setting
  pinctrl: ingenic: Rename registers from JZ4760_GPIO_* to JZ4770_GPIO_*
  pinctrl: ingenic: Fix JZ4760 support

This line dates back to 2013, but cppcheck complained because commit
2f713615

 ("libceph: move msgr1 protocol implementation to its own
file") moved it.  Add parenthesis to silence the warning.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Starting from vangogh, the ATCL2 and DAGB0 registers relative
to mgcg/ls has changed.

For MGCG:
Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL.

For MGLS:
Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL.
Add DAGB0_(WR/RD)_CGTT_CLK_CTRL registers.

Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

GCR_GENERAL_CNTL is defined differently in gc_10_1_0_offset.h and
gc_10_3_0_offset.h. Update GCR_GENERAL_CNTL for Vangogh.

Signed-off-by: Jinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>