Commit fd3b2aa1 authored by Hector Martin's avatar Hector Martin
Browse files

Merge commit '71b25f4d' from tty/tty-next 



This point in gregkh's tty-next tree includes all the samsung_tty
changes that were part of v3 of the M1 bring-up series, and have
already been merged in.

Signed-off-by: default avatarHector Martin <marcan@marcan.st>
parents 1e28eed1 71b25f4d

Documentation/admin-guide/devices.txt

+1 −11
Original line number Diff line number Diff line
@@ -289,7 +289,7 @@ 
		152 = /dev/kpoll	Kernel Poll Driver

		153 = /dev/mergemem	Memory merge device

		154 = /dev/pmu		Macintosh PowerBook power manager

		155 = /dev/isictl	MultiTech ISICom serial control

		155 =

		156 = /dev/lcd		Front panel LCD display

		157 = /dev/ac		Applicom Intl Profibus card

		158 = /dev/nwbutton	Netwinder external button
@@ -477,11 +477,6 @@ 
  18 block	Sanyo CD-ROM

		  0 = /dev/sjcd		Sanyo CD-ROM



  19 char	Cyclades serial card

		  0 = /dev/ttyC0	First Cyclades port

		    ...

		 31 = /dev/ttyC31	32nd Cyclades port



  19 block	"Double" compressed disk

		  0 = /dev/double0	First compressed disk

		    ...
@@ -493,11 +488,6 @@ 
		See the Double documentation for the meaning of the

		mirror devices.



  20 char	Cyclades serial card - alternate devices

		  0 = /dev/cub0		Callout device for ttyC0

		    ...

		 31 = /dev/cub31	Callout device for ttyC31



  20 block	Hitachi CD-ROM (under development)

		  0 = /dev/hitcd	Hitachi CD-ROM

Documentation/devicetree/bindings/serial/samsung_uart.yaml

+13 −1
Original line number Diff line number Diff line
@@ -4,7 +4,7 @@ 
$id: http://devicetree.org/schemas/serial/samsung_uart.yaml#

$schema: http://devicetree.org/meta-schemas/core.yaml#



title: Samsung S3C, S5P and Exynos SoC UART Controller

title: Samsung S3C, S5P, Exynos, and S5L (Apple SoC) SoC UART Controller



maintainers:

  - Krzysztof Kozlowski <krzk@kernel.org>
@@ -19,6 +19,7 @@ properties: 
  compatible:

    items:

      - enum:

          - apple,s5l-uart

          - samsung,s3c2410-uart

          - samsung,s3c2412-uart

          - samsung,s3c2440-uart
@@ -51,6 +52,16 @@ properties: 
      - pattern: '^clk_uart_baud[0-3]$'

      - pattern: '^clk_uart_baud[0-3]$'



  dmas:

    items:

      - description: DMA controller phandle and request line for RX

      - description: DMA controller phandle and request line for TX



  dma-names:

    items:

      - const: rx

      - const: tx



  interrupts:

    description: RX interrupt and optionally TX interrupt.

    minItems: 1
@@ -96,6 +107,7 @@ allOf: 
        compatible:

          contains:

            enum:

              - apple,s5l-uart

              - samsung,exynos4210-uart

    then:

      properties:

Documentation/driver-api/serial/cyclades_z.rst

deleted100644 → 0
+0 −11
Original line number Diff line number Diff line 
================

Cyclades-Z notes

================



The Cyclades-Z must have firmware loaded onto the card before it will

operate.  This operation should be performed during system startup,



The firmware, loader program and the latest device driver code are

available from Cyclades at



    ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/

Documentation/driver-api/serial/index.rst

+0 −1
Original line number Diff line number Diff line
@@ -17,7 +17,6 @@ Serial drivers 
.. toctree::

    :maxdepth: 1



    cyclades_z

    moxa-smartio

    n_gsm

    rocket

Documentation/driver-api/serial/rocket.rst

deleted100644 → 0
+0 −185
Original line number Diff line number Diff line 
================================================

Comtrol(tm) RocketPort(R)/RocketModem(TM) Series

================================================



Device Driver for the Linux Operating System

============================================



Product overview

----------------



This driver provides a loadable kernel driver for the Comtrol RocketPort

and RocketModem PCI boards. These boards provide, 2, 4, 8, 16, or 32

high-speed serial ports or modems.  This driver supports up to a combination

of four RocketPort or RocketModems boards in one machine simultaneously.

This file assumes that you are using the RocketPort driver which is

integrated into the kernel sources.



The driver can also be installed as an external module using the usual

"make;make install" routine.  This external module driver, obtainable

from the Comtrol website listed below, is useful for updating the driver

or installing it into kernels which do not have the driver configured

into them.  Installations instructions for the external module

are in the included README and HW_INSTALL files.



RocketPort ISA and RocketModem II PCI boards currently are only supported by

this driver in module form.



The RocketPort ISA board requires I/O ports to be configured by the DIP

switches on the board.  See the section "ISA Rocketport Boards" below for

information on how to set the DIP switches.



You pass the I/O port to the driver using the following module parameters:



board1:

	I/O port for the first ISA board

board2:

	I/O port for the second ISA board

board3:

	I/O port for the third ISA board

board4:

	I/O port for the fourth ISA board



There is a set of utilities and scripts provided with the external driver

(downloadable from http://www.comtrol.com) that ease the configuration and

setup of the ISA cards.



The RocketModem II PCI boards require firmware to be loaded into the card

before it will function.  The driver has only been tested as a module for this

board.



Installation Procedures

-----------------------



RocketPort/RocketModem PCI cards require no driver configuration, they are

automatically detected and configured.



The RocketPort driver can be installed as a module (recommended) or built

into the kernel. This is selected, as for other drivers, through the `make config`

command from the root of the Linux source tree during the kernel build process.



The RocketPort/RocketModem serial ports installed by this driver are assigned

device major number 46, and will be named /dev/ttyRx, where x is the port number

starting at zero (ex. /dev/ttyR0, /devttyR1, ...).  If you have multiple cards

installed in the system, the mapping of port names to serial ports is displayed

in the system log at /var/log/messages.



If installed as a module, the module must be loaded.  This can be done

manually by entering "modprobe rocket".  To have the module loaded automatically

upon system boot, edit a `/etc/modprobe.d/*.conf` file and add the line

"alias char-major-46 rocket".



In order to use the ports, their device names (nodes) must be created with mknod.

This is only required once, the system will retain the names once created.  To

create the RocketPort/RocketModem device names, use the command

"mknod /dev/ttyRx c 46 x" where x is the port number starting at zero.



For example::



	> mknod /dev/ttyR0 c 46 0

	> mknod /dev/ttyR1 c 46 1

	> mknod /dev/ttyR2 c 46 2



The Linux script MAKEDEV will create the first 16 ttyRx device names (nodes)

for you::



	>/dev/MAKEDEV ttyR



ISA Rocketport Boards

---------------------



You must assign and configure the I/O addresses used by the ISA Rocketport

card before installing and using it.  This is done by setting a set of DIP

switches on the Rocketport board.





Setting the I/O address

-----------------------



Before installing RocketPort(R) or RocketPort RA boards, you must find

a range of I/O addresses for it to use. The first RocketPort card

requires a 68-byte contiguous block of I/O addresses, starting at one

of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h,

0x300h, 0x340h, 0x380h.  This I/O address must be reflected in the DIP

switches of *all* of the Rocketport cards.



The second, third, and fourth RocketPort cards require a 64-byte

contiguous block of I/O addresses, starting at one of the following

I/O addresses: 0x100h, 0x140h, 0x180h, 0x1C0h, 0x200h, 0x240h, 0x280h,

0x2C0h, 0x300h, 0x340h, 0x380h, 0x3C0h.  The I/O address used by the

second, third, and fourth Rocketport cards (if present) are set via

software control.  The DIP switch settings for the I/O address must be

set to the value of the first Rocketport cards.



In order to distinguish each of the card from the others, each card

must have a unique board ID set on the dip switches.  The first

Rocketport board must be set with the DIP switches corresponding to

the first board, the second board must be set with the DIP switches

corresponding to the second board, etc.  IMPORTANT: The board ID is

the only place where the DIP switch settings should differ between the

various Rocketport boards in a system.



The I/O address range used by any of the RocketPort cards must not

conflict with any other cards in the system, including other

RocketPort cards.  Below, you will find a list of commonly used I/O

address ranges which may be in use by other devices in your system.

On a Linux system, "cat /proc/ioports" will also be helpful in

identifying what I/O addresses are being used by devices on your

system.



Remember, the FIRST RocketPort uses 68 I/O addresses.  So, if you set it

for 0x100, it will occupy 0x100 to 0x143.  This would mean that you

CAN NOT set the second, third or fourth board for address 0x140 since

the first 4 bytes of that range are used by the first board.  You would

need to set the second, third, or fourth board to one of the next available

blocks such as 0x180.



RocketPort and RocketPort RA SW1 Settings::



            +-------------------------------+

            | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |

            +-------+-------+---------------+

            | Unused| Card  | I/O Port Block|

            +-------------------------------+



  DIP Switches                             DIP Switches

  7    8                                   6    5

  ===================                      ===================

  On   On   UNUSED, MUST BE ON.            On   On   First Card    <==== Default

                                           On   Off  Second Card

                                           Off  On   Third Card

                                           Off  Off  Fourth Card



  DIP Switches         I/O Address Range

  4    3    2    1     Used by the First Card

  =====================================

  On   Off  On   Off   100-143

  On   Off  Off  On    140-183

  On   Off  Off  Off   180-1C3       <==== Default

  Off  On   On   Off   200-243

  Off  On   Off  On    240-283

  Off  On   Off  Off   280-2C3

  Off  Off  On   Off   300-343

  Off  Off  Off  On    340-383

  Off  Off  Off  Off   380-3C3



Reporting Bugs

--------------



For technical support, please provide the following

information: Driver version, kernel release, distribution of

kernel, and type of board you are using. Error messages and log

printouts port configuration details are especially helpful.



USA:

    :Phone: (612) 494-4100

    :FAX: (612) 494-4199

    :email: support@comtrol.com



Comtrol Europe:

    :Phone: +44 (0) 1 869 323-220

    :FAX: +44 (0) 1 869 323-211

    :email: support@comtrol.co.uk



Web:	http://www.comtrol.com

FTP:	ftp.comtrol.com