Commit faa3b6df authored by Jagan Teki's avatar Jagan Teki Committed by Shawn Guo
Browse files

ARM: dts: imx6q-icore-ofcap10: Use 10.1" Ampire panel compatible 



Adding display timings directly on device tree files make it difficult
to maintain as a same copy of timings may exist on different files or
panel-simple driver.

We have a panel-simple driver for this particular usage so supporting
on this driver will help to use the same timings on any device tree
files if the board mounted on a similar vendor display.

Engicam C.TOUCH OF 10.1" LCD board uses Ampire 10.1" TFT LCD and
it has supported by panel-simple already, so simply use that binding.

Signed-off-by: default avatarJagan Teki <jagan@amarulasolutions.com>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 79bd11db

arch/arm/boot/dts/imx6q-icore-ofcap10.dts

+16 −12
Original line number Diff line number Diff line
@@ -12,6 +12,17 @@ 
/ {

	model = "Engicam i.CoreM6 Quad/Dual OpenFrame Capacitive touch 10.1 Kit";

	compatible = "engicam,imx6-icore", "fsl,imx6q";



	panel {

		compatible = "ampire,am-1280800n3tzqw-t00h";

		backlight = <&backlight_lvds>;



		port {

			panel_in: endpoint {

				remote-endpoint = <&lvds0_out>;

			};

		};

	};

};



&ldb {
@@ -22,18 +33,11 @@ 
		fsl,data-width = <24>;

		status = "okay";



		display-timings {

			native-mode = <&timing0>;

			timing0: timing0 {

				clock-frequency = <60000000>;

				hactive = <1280>;

				vactive = <800>;

				hback-porch = <40>;

				hfront-porch = <40>;

				vback-porch = <10>;

				vfront-porch = <3>;

				hsync-len = <80>;

				vsync-len = <10>;

		port@4 {

			reg = <4>;



			lvds0_out: endpoint {

				remote-endpoint = <&panel_in>;

			};

		};

	};